From fb27cfbcbd2865b0e731c4aae47df71778da805e Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 25 Aug 2010 12:19:53 -0700 Subject: xenfs/xenbus: report partial reads/writes correctly copy_(to|from)_user return the number of uncopied bytes, so a successful return is 0, and any non-zero result indicates some degree of failure. Reported-by: "Jun Zhu (Intern)" Signed-off-by: Jeremy Fitzhardinge --- drivers/xen/xenfs/xenbus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/xenfs/xenbus.c b/drivers/xen/xenfs/xenbus.c index 9d5b519d2e4c..d2a905826804 100644 --- a/drivers/xen/xenfs/xenbus.c +++ b/drivers/xen/xenfs/xenbus.c @@ -142,7 +142,7 @@ static ssize_t xenbus_file_read(struct file *filp, i += sz - ret; rb->cons += sz - ret; - if (ret != sz) { + if (ret != 0) { if (i == 0) i = -EFAULT; goto out; @@ -453,7 +453,7 @@ static ssize_t xenbus_file_write(struct file *filp, ret = copy_from_user(u->u.buffer + u->len, ubuf, len); - if (ret == len) { + if (ret != 0) { rc = -EFAULT; goto out; } -- cgit v1.2.1 From 6d6df2e412297b8047c407b3abcd045a67c96744 Mon Sep 17 00:00:00 2001 From: Diego Ongaro Date: Wed, 1 Sep 2010 09:18:54 -0700 Subject: xenbus: allow any xenbus command over /proc/xen/xenbus When xenstored is in another domain, we need to be able to send any command over xenbus. This doesn't pose a security problem because its up to xenstored to determine whether a given client is allowed to use a particular command anyway. From linux-2.5.18-xen.hg 68d582b0ad05. Signed-off-by: Jeremy Fitzhardinge --- drivers/xen/xenfs/xenbus.c | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/xenfs/xenbus.c b/drivers/xen/xenfs/xenbus.c index d2a905826804..46cf4048e60e 100644 --- a/drivers/xen/xenfs/xenbus.c +++ b/drivers/xen/xenfs/xenbus.c @@ -486,21 +486,6 @@ static ssize_t xenbus_file_write(struct file *filp, msg_type = u->u.msg.type; switch (msg_type) { - case XS_TRANSACTION_START: - case XS_TRANSACTION_END: - case XS_DIRECTORY: - case XS_READ: - case XS_GET_PERMS: - case XS_RELEASE: - case XS_GET_DOMAIN_PATH: - case XS_WRITE: - case XS_MKDIR: - case XS_RM: - case XS_SET_PERMS: - /* Send out a transaction */ - ret = xenbus_write_transaction(msg_type, u); - break; - case XS_WATCH: case XS_UNWATCH: /* (Un)Ask for some path to be watched for changes */ @@ -508,7 +493,8 @@ static ssize_t xenbus_file_write(struct file *filp, break; default: - ret = -EINVAL; + /* Send out a transaction */ + ret = xenbus_write_transaction(msg_type, u); break; } if (ret != 0) -- cgit v1.2.1 From 76ce7618f9a24f7b13958c67f7d5ccfcdab71475 Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Tue, 7 Sep 2010 11:42:18 -0400 Subject: xenbus: add missing wakeup in concurrent read/write If an application has a dedicated read thread watching xenbus and another thread writes an XS_WATCH message that generates a synthetic "OK" reply, this reply will be enqueued in the buffer without waking up the reader. This can cause a deadlock in the application if it then waits for the read thread to receive the queued message. Signed-off-by: Daniel De Graaf commit e752969f502a511e83f841aa01d6cd332e6d85a0 Author: Daniel De Graaf Date: Tue Sep 7 11:21:52 2010 -0400 xenbus: fix deadlock in concurrent read/write If an application has a dedicated read thread watching xenbus and another thread writes an XS_WATCH message that generates a synthetic "OK" reply, this reply will be enqueued in the buffer without waking up the reader. Signed-off-by: Jeremy Fitzhardinge --- drivers/xen/xenfs/xenbus.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/xen/xenfs/xenbus.c b/drivers/xen/xenfs/xenbus.c index 46cf4048e60e..c4c7db8363e7 100644 --- a/drivers/xen/xenfs/xenbus.c +++ b/drivers/xen/xenfs/xenbus.c @@ -405,6 +405,7 @@ static int xenbus_write_watch(unsigned msg_type, struct xenbus_file_priv *u) mutex_lock(&u->reply_mutex); rc = queue_reply(&u->read_buffers, &reply, sizeof(reply)); + wake_up(&u->read_waitq); mutex_unlock(&u->reply_mutex); } -- cgit v1.2.1 From 7808121b9a1e44ef12fecd49fa6c268f27a150fc Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Wed, 8 Sep 2010 18:10:42 -0400 Subject: xenbus: avoid zero returns from read() It is possible to get a zero return from read() in instances where the queue is not empty but has no elements with data to deliver to the user. Since a zero return from read is an error indicator, resume waiting or return -EAGAIN (for a nonblocking fd) in this case. Signed-off-by: Daniel De Graaf Signed-off-by: Jeremy Fitzhardinge --- drivers/xen/xenfs/xenbus.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/xen/xenfs/xenbus.c b/drivers/xen/xenfs/xenbus.c index c4c7db8363e7..55791dd1105f 100644 --- a/drivers/xen/xenfs/xenbus.c +++ b/drivers/xen/xenfs/xenbus.c @@ -120,6 +120,7 @@ static ssize_t xenbus_file_read(struct file *filp, int ret; mutex_lock(&u->reply_mutex); +again: while (list_empty(&u->read_buffers)) { mutex_unlock(&u->reply_mutex); if (filp->f_flags & O_NONBLOCK) @@ -158,6 +159,8 @@ static ssize_t xenbus_file_read(struct file *filp, struct read_buffer, list); } } + if (i == 0) + goto again; out: mutex_unlock(&u->reply_mutex); -- cgit v1.2.1 From 803711afdbea5c6a6dd2b46eca76097f6d50fb53 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Mon, 25 Oct 2010 21:11:15 +0200 Subject: PNP: Compile all pnp built-in stuff in one module namespace This is cleanup mostly, nothing urgent. I came up with it when looking at dynamic debug which can enable pr_debug messages at runtime or boot param for a specific module. Advantages: - Any pnp code can make use of the moduleparam.h interface, the modules will show up as pnp.param. - Passing pnp.ddebug as kernel boot param will enable all pnp debug messages with my previous patch and CONFIG_DYNAMIC_DEBUG enabled. Signed-off-by: Thomas Renninger Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/pnp/Makefile | 6 ++++-- drivers/pnp/isapnp/Makefile | 6 +++--- drivers/pnp/pnpacpi/Makefile | 3 ++- drivers/pnp/pnpbios/Makefile | 5 +++-- 4 files changed, 12 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/Makefile b/drivers/pnp/Makefile index 8de3775ec242..bfba893cb321 100644 --- a/drivers/pnp/Makefile +++ b/drivers/pnp/Makefile @@ -2,11 +2,13 @@ # Makefile for the Linux Plug-and-Play Support. # -obj-y := core.o card.o driver.o resource.o manager.o support.o interface.o quirks.o +obj-y := pnp.o + +pnp-y := core.o card.o driver.o resource.o manager.o support.o interface.o quirks.o obj-$(CONFIG_PNPACPI) += pnpacpi/ obj-$(CONFIG_PNPBIOS) += pnpbios/ obj-$(CONFIG_ISAPNP) += isapnp/ # pnp_system_init goes after pnpacpi/pnpbios init -obj-y += system.o +pnp-y += system.o diff --git a/drivers/pnp/isapnp/Makefile b/drivers/pnp/isapnp/Makefile index cac18bbfb817..6e607aa33aa3 100644 --- a/drivers/pnp/isapnp/Makefile +++ b/drivers/pnp/isapnp/Makefile @@ -1,7 +1,7 @@ # # Makefile for the kernel ISAPNP driver. # +obj-y += pnp.o +pnp-y := core.o compat.o -isapnp-proc-$(CONFIG_PROC_FS) = proc.o - -obj-y := core.o compat.o $(isapnp-proc-y) +pnp-$(CONFIG_PROC_FS) += proc.o diff --git a/drivers/pnp/pnpacpi/Makefile b/drivers/pnp/pnpacpi/Makefile index 905326fcca85..40c93da18252 100644 --- a/drivers/pnp/pnpacpi/Makefile +++ b/drivers/pnp/pnpacpi/Makefile @@ -1,5 +1,6 @@ # # Makefile for the kernel PNPACPI driver. # +obj-y += pnp.o -obj-y := core.o rsparser.o +pnp-y := core.o rsparser.o diff --git a/drivers/pnp/pnpbios/Makefile b/drivers/pnp/pnpbios/Makefile index 3cd3ed760605..240b0ffb83ca 100644 --- a/drivers/pnp/pnpbios/Makefile +++ b/drivers/pnp/pnpbios/Makefile @@ -1,7 +1,8 @@ # # Makefile for the kernel PNPBIOS driver. # +obj-y := pnp.o -pnpbios-proc-$(CONFIG_PNPBIOS_PROC_FS) = proc.o +pnp-y := core.o bioscalls.o rsparser.o -obj-y := core.o bioscalls.o rsparser.o $(pnpbios-proc-y) +pnp-$(CONFIG_PNPBIOS_PROC_FS) += proc.o -- cgit v1.2.1 From cdefba03e44bd3b3311a3849a81ec7030dfa1519 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Mon, 25 Oct 2010 21:11:16 +0200 Subject: PNP: Set up pnp_debug via module and not via boot param. Cleanup only, no functional change (pnp.debug can be enabled and disabled at runtime, but that's not a real enhancement). This one depends on another PNP cleanup patch: PNP: Compile all pnp built-in stuff in one module namespace Signed-off-by: Thomas Renninger Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/pnp/core.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/core.c b/drivers/pnp/core.c index 88b3cde52596..9801918b2726 100644 --- a/drivers/pnp/core.c +++ b/drivers/pnp/core.c @@ -218,10 +218,5 @@ subsys_initcall(pnp_init); int pnp_debug; #if defined(CONFIG_PNP_DEBUG_MESSAGES) -static int __init pnp_debug_setup(char *__unused) -{ - pnp_debug = 1; - return 1; -} -__setup("pnp.debug", pnp_debug_setup); +module_param_named(debug, pnp_debug, int, 0644); #endif -- cgit v1.2.1 From 86af95039b69a90db15294eb1f9c147f1df0a8ea Mon Sep 17 00:00:00 2001 From: Sven Neumann Date: Fri, 12 Nov 2010 11:36:22 +0100 Subject: ds2760_battery: Fix calculation of time_to_empty_now A check against division by zero was modified in commit b0525b48. Since this change time_to_empty_now is always reported as zero while the battery is discharging and as a negative value while the battery is charging. This is because current is negative while the battery is discharging. Fix the check introduced by commit b0525b48 so that time_to_empty_now is reported correctly during discharge and as zero while charging. Signed-off-by: Sven Neumann Acked-by: Daniel Mack Cc: stable@kernel.org [2.6.32..2.6.36] Signed-off-by: Anton Vorontsov --- drivers/power/ds2760_battery.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c index b3c01c16a164..11e1ac508e57 100644 --- a/drivers/power/ds2760_battery.c +++ b/drivers/power/ds2760_battery.c @@ -212,7 +212,7 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di) if (di->rem_capacity > 100) di->rem_capacity = 100; - if (di->current_uA >= 100L) + if (di->current_uA < -100L) di->life_sec = -((di->accum_current_uAh - di->empty_uAh) * 36L) / (di->current_uA / 100L); else -- cgit v1.2.1 From 8ec98fe0b4ffdedce4c1caa9fb3d550f52ad1c6b Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 11 Nov 2010 19:00:52 +0100 Subject: jz4740-battery: Protect against concurrent battery readings We can not handle more then one ADC request at a time to the battery. The patch adds a mutex around the ADC read code to ensure this. Signed-off-by: Lars-Peter Clausen Cc: stable@kernel.org Signed-off-by: Anton Vorontsov --- drivers/power/jz4740-battery.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/power/jz4740-battery.c b/drivers/power/jz4740-battery.c index a8108a73593e..2bbe04ae13a7 100644 --- a/drivers/power/jz4740-battery.c +++ b/drivers/power/jz4740-battery.c @@ -47,6 +47,8 @@ struct jz_battery { struct power_supply battery; struct delayed_work work; + + struct mutex lock; }; static inline struct jz_battery *psy_to_jz_battery(struct power_supply *psy) @@ -68,6 +70,8 @@ static long jz_battery_read_voltage(struct jz_battery *battery) unsigned long val; long voltage; + mutex_lock(&battery->lock); + INIT_COMPLETION(battery->read_completion); enable_irq(battery->irq); @@ -91,6 +95,8 @@ static long jz_battery_read_voltage(struct jz_battery *battery) battery->cell->disable(battery->pdev); disable_irq(battery->irq); + mutex_unlock(&battery->lock); + return voltage; } @@ -291,6 +297,7 @@ static int __devinit jz_battery_probe(struct platform_device *pdev) jz_battery->pdev = pdev; init_completion(&jz_battery->read_completion); + mutex_init(&jz_battery->lock); INIT_DELAYED_WORK(&jz_battery->work, jz_battery_work); -- cgit v1.2.1 From 5070437cd99511f69ae561f2ab417142a47a85ec Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 21 Oct 2010 17:55:01 +0200 Subject: power_supply: Add gpio charger driver This patch adds a simple driver for chargers indicating their online status through a GPIO pin. Signed-off-by: Lars-Peter Clausen Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 10 +++ drivers/power/Makefile | 1 + drivers/power/gpio-charger.c | 185 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 196 insertions(+) create mode 100644 drivers/power/gpio-charger.c (limited to 'drivers') diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 60d83d983a36..32165295cb1b 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -185,4 +185,14 @@ config CHARGER_TWL4030 help Say Y here to enable support for TWL4030 Battery Charge Interface. +config CHARGER_GPIO + tristate "GPIO charger" + depends on GPIOLIB + help + Say Y to include support for chargers which report their online status + through a GPIO pin. + + This driver can be build as a module. If so, the module will be + called gpio-charger. + endif # POWER_SUPPLY diff --git a/drivers/power/Makefile b/drivers/power/Makefile index c75772eb157c..545459f9f356 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -32,3 +32,4 @@ obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o +obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o diff --git a/drivers/power/gpio-charger.c b/drivers/power/gpio-charger.c new file mode 100644 index 000000000000..fccbe99b619c --- /dev/null +++ b/drivers/power/gpio-charger.c @@ -0,0 +1,185 @@ +/* + * Copyright (C) 2010, Lars-Peter Clausen + * Driver for chargers which report their online status through a GPIO pin + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +struct gpio_charger { + const struct gpio_charger_platform_data *pdata; + unsigned int irq; + + struct power_supply charger; +}; + +static irqreturn_t gpio_charger_irq(int irq, void *devid) +{ + struct power_supply *charger = devid; + + power_supply_changed(charger); + + return IRQ_HANDLED; +} + +static inline struct gpio_charger *psy_to_gpio_charger(struct power_supply *psy) +{ + return container_of(psy, struct gpio_charger, charger); +} + +static int gpio_charger_get_property(struct power_supply *psy, + enum power_supply_property psp, union power_supply_propval *val) +{ + struct gpio_charger *gpio_charger = psy_to_gpio_charger(psy); + const struct gpio_charger_platform_data *pdata = gpio_charger->pdata; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = gpio_get_value(pdata->gpio); + val->intval ^= pdata->gpio_active_low; + break; + default: + return -EINVAL; + } + + return 0; +} + +static enum power_supply_property gpio_charger_properties[] = { + POWER_SUPPLY_PROP_ONLINE, +}; + +static int __devinit gpio_charger_probe(struct platform_device *pdev) +{ + const struct gpio_charger_platform_data *pdata = pdev->dev.platform_data; + struct gpio_charger *gpio_charger; + struct power_supply *charger; + int ret; + int irq; + + if (!pdata) { + dev_err(&pdev->dev, "No platform data\n"); + return -EINVAL; + } + + if (!gpio_is_valid(pdata->gpio)) { + dev_err(&pdev->dev, "Invalid gpio pin\n"); + return -EINVAL; + } + + gpio_charger = kzalloc(sizeof(*gpio_charger), GFP_KERNEL); + + charger = &gpio_charger->charger; + + charger->name = pdata->name; + charger->type = pdata->type; + charger->properties = gpio_charger_properties; + charger->num_properties = ARRAY_SIZE(gpio_charger_properties); + charger->get_property = gpio_charger_get_property; + charger->supplied_to = pdata->supplied_to; + charger->num_supplicants = pdata->num_supplicants; + + ret = gpio_request(pdata->gpio, dev_name(&pdev->dev)); + if (ret) { + dev_err(&pdev->dev, "Failed to request gpio pin: %d\n", ret); + goto err_free; + } + ret = gpio_direction_input(pdata->gpio); + if (ret) { + dev_err(&pdev->dev, "Failed to set gpio to input: %d\n", ret); + goto err_gpio_free; + } + + irq = gpio_to_irq(pdata->gpio); + if (irq > 0) { + ret = request_irq(irq, gpio_charger_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + dev_name(&pdev->dev), charger); + if (ret) + dev_warn(&pdev->dev, "Failed to request irq: %d\n", ret); + else + gpio_charger->irq = irq; + } + + gpio_charger->pdata = pdata; + + ret = power_supply_register(&pdev->dev, charger); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to register power supply: %d\n", ret); + goto err_irq_free; + } + + platform_set_drvdata(pdev, gpio_charger); + + return 0; + +err_irq_free: + if (gpio_charger->irq) + free_irq(gpio_charger->irq, charger); +err_gpio_free: + gpio_free(pdata->gpio); +err_free: + kfree(gpio_charger); + return ret; +} + +static int __devexit gpio_charger_remove(struct platform_device *pdev) +{ + struct gpio_charger *gpio_charger = platform_get_drvdata(pdev); + + power_supply_unregister(&gpio_charger->charger); + + if (gpio_charger->irq) + free_irq(gpio_charger->irq, &gpio_charger->charger); + gpio_free(gpio_charger->pdata->gpio); + + platform_set_drvdata(pdev, NULL); + kfree(gpio_charger); + + return 0; +} + +static struct platform_driver gpio_charger_driver = { + .probe = gpio_charger_probe, + .remove = __devexit_p(gpio_charger_remove), + .driver = { + .name = "gpio-charger", + .owner = THIS_MODULE, + }, +}; + +static int __init gpio_charger_init(void) +{ + return platform_driver_register(&gpio_charger_driver); +} +module_init(gpio_charger_init); + +static void __exit gpio_charger_exit(void) +{ + platform_driver_unregister(&gpio_charger_driver); +} +module_exit(gpio_charger_exit); + +MODULE_AUTHOR("Lars-Peter Clausen "); +MODULE_DESCRIPTION("Driver for chargers which report their online status through a GPIO"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:gpio-charger"); -- cgit v1.2.1 From 746d8fb8c6933337c927f40c9ef90dcbddcfd39e Mon Sep 17 00:00:00 2001 From: Ameya Palande Date: Thu, 4 Nov 2010 16:31:46 +0200 Subject: isp1704_charger: Correct length for storing model Model should have room to accommodate the trailing null byte, "isp170[4|7]\0". Signed-off-by: Ameya Palande Acked-by: Heikki Krogerus Signed-off-by: Anton Vorontsov --- drivers/power/isp1704_charger.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c index 72512185f3e2..87252e13e29c 100644 --- a/drivers/power/isp1704_charger.c +++ b/drivers/power/isp1704_charger.c @@ -59,7 +59,7 @@ struct isp1704_charger { struct notifier_block nb; struct work_struct work; - char model[7]; + char model[8]; unsigned present:1; }; -- cgit v1.2.1 From bac43b20501058ab0728246acce3bb85f2e72648 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 4 Nov 2010 16:31:47 +0200 Subject: isp1704_charger: Detect HUB/Host chargers To avoid breaking high speed chirp handshaking with CDP chargers, no more then 500mA should be drawn. To make sure of this, utilizing current_max property. After the device has enumerated, it's safe to draw the maximum 1800mA as defined in the Battery Charging Specification. This can be also used with normal USB connection if the controller sends ENUMERATED notification with the milliamps as data. From now on the online property indicates VBUS, present property if there is a charger and current_max the milliamps possible to draw from VBUS. Signed-off-by: Heikki Krogerus Signed-off-by: Anton Vorontsov --- drivers/power/isp1704_charger.c | 180 +++++++++++++++++++++++++++++++--------- 1 file changed, 142 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c index 87252e13e29c..10c7cc5fb5f9 100644 --- a/drivers/power/isp1704_charger.c +++ b/drivers/power/isp1704_charger.c @@ -59,10 +59,60 @@ struct isp1704_charger { struct notifier_block nb; struct work_struct work; + /* properties */ char model[8]; unsigned present:1; + unsigned online:1; + unsigned current_max; + + /* temp storage variables */ + unsigned long event; + unsigned max_power; }; +/* + * Determine is the charging port DCP (dedicated charger) or CDP (Host/HUB + * chargers). + * + * REVISIT: The method is defined in Battery Charging Specification and is + * applicable to any ULPI transceiver. Nothing isp170x specific here. + */ +static inline int isp1704_charger_type(struct isp1704_charger *isp) +{ + u8 reg; + u8 func_ctrl; + u8 otg_ctrl; + int type = POWER_SUPPLY_TYPE_USB_DCP; + + func_ctrl = otg_io_read(isp->otg, ULPI_FUNC_CTRL); + otg_ctrl = otg_io_read(isp->otg, ULPI_OTG_CTRL); + + /* disable pulldowns */ + reg = ULPI_OTG_CTRL_DM_PULLDOWN | ULPI_OTG_CTRL_DP_PULLDOWN; + otg_io_write(isp->otg, ULPI_CLR(ULPI_OTG_CTRL), reg); + + /* full speed */ + otg_io_write(isp->otg, ULPI_CLR(ULPI_FUNC_CTRL), + ULPI_FUNC_CTRL_XCVRSEL_MASK); + otg_io_write(isp->otg, ULPI_SET(ULPI_FUNC_CTRL), + ULPI_FUNC_CTRL_FULL_SPEED); + + /* Enable strong pull-up on DP (1.5K) and reset */ + reg = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET; + otg_io_write(isp->otg, ULPI_SET(ULPI_FUNC_CTRL), reg); + usleep_range(1000, 2000); + + reg = otg_io_read(isp->otg, ULPI_DEBUG); + if ((reg & 3) != 3) + type = POWER_SUPPLY_TYPE_USB_CDP; + + /* recover original state */ + otg_io_write(isp->otg, ULPI_FUNC_CTRL, func_ctrl); + otg_io_write(isp->otg, ULPI_OTG_CTRL, otg_ctrl); + + return type; +} + /* * ISP1704 detects PS/2 adapters as charger. To make sure the detected charger * is actually a dedicated charger, the following steps need to be taken. @@ -127,16 +177,19 @@ static inline int isp1704_charger_verify(struct isp1704_charger *isp) static inline int isp1704_charger_detect(struct isp1704_charger *isp) { unsigned long timeout; - u8 r; + u8 pwr_ctrl; int ret = 0; + pwr_ctrl = otg_io_read(isp->otg, ISP1704_PWR_CTRL); + /* set SW control bit in PWR_CTRL register */ otg_io_write(isp->otg, ISP1704_PWR_CTRL, ISP1704_PWR_CTRL_SWCTRL); /* enable manual charger detection */ - r = (ISP1704_PWR_CTRL_SWCTRL | ISP1704_PWR_CTRL_DPVSRC_EN); - otg_io_write(isp->otg, ULPI_SET(ISP1704_PWR_CTRL), r); + otg_io_write(isp->otg, ULPI_SET(ISP1704_PWR_CTRL), + ISP1704_PWR_CTRL_SWCTRL + | ISP1704_PWR_CTRL_DPVSRC_EN); usleep_range(1000, 2000); timeout = jiffies + msecs_to_jiffies(300); @@ -147,7 +200,10 @@ static inline int isp1704_charger_detect(struct isp1704_charger *isp) ret = isp1704_charger_verify(isp); break; } - } while (!time_after(jiffies, timeout)); + } while (!time_after(jiffies, timeout) && isp->online); + + /* recover original state */ + otg_io_write(isp->otg, ISP1704_PWR_CTRL, pwr_ctrl); return ret; } @@ -155,53 +211,93 @@ static inline int isp1704_charger_detect(struct isp1704_charger *isp) static void isp1704_charger_work(struct work_struct *data) { int detect; + unsigned long event; + unsigned power; struct isp1704_charger *isp = container_of(data, struct isp1704_charger, work); + static DEFINE_MUTEX(lock); - /* - * FIXME Only supporting dedicated chargers even though isp1704 can - * detect HUB and HOST chargers. If the device has already been - * enumerated, the detection will break the connection. - */ - if (isp->otg->state != OTG_STATE_B_IDLE) - return; - - /* disable data pullups */ - if (isp->otg->gadget) - usb_gadget_disconnect(isp->otg->gadget); - - /* detect charger */ - detect = isp1704_charger_detect(isp); - if (detect) { - isp->present = detect; - power_supply_changed(&isp->psy); - } + event = isp->event; + power = isp->max_power; - /* enable data pullups */ - if (isp->otg->gadget) - usb_gadget_connect(isp->otg->gadget); -} - -static int isp1704_notifier_call(struct notifier_block *nb, - unsigned long event, void *unused) -{ - struct isp1704_charger *isp = - container_of(nb, struct isp1704_charger, nb); + mutex_lock(&lock); switch (event) { case USB_EVENT_VBUS: - schedule_work(&isp->work); + isp->online = true; + + /* detect charger */ + detect = isp1704_charger_detect(isp); + + if (detect) { + isp->present = detect; + isp->psy.type = isp1704_charger_type(isp); + } + + switch (isp->psy.type) { + case POWER_SUPPLY_TYPE_USB_DCP: + isp->current_max = 1800; + break; + case POWER_SUPPLY_TYPE_USB_CDP: + /* + * Only 500mA here or high speed chirp + * handshaking may break + */ + isp->current_max = 500; + /* FALLTHROUGH */ + case POWER_SUPPLY_TYPE_USB: + default: + /* enable data pullups */ + if (isp->otg->gadget) + usb_gadget_connect(isp->otg->gadget); + } break; case USB_EVENT_NONE: - if (isp->present) { - isp->present = 0; - power_supply_changed(&isp->psy); - } + isp->online = false; + isp->current_max = 0; + isp->present = 0; + isp->current_max = 0; + isp->psy.type = POWER_SUPPLY_TYPE_USB; + + /* + * Disable data pullups. We need to prevent the controller from + * enumerating. + * + * FIXME: This is here to allow charger detection with Host/HUB + * chargers. The pullups may be enabled elsewhere, so this can + * not be the final solution. + */ + if (isp->otg->gadget) + usb_gadget_disconnect(isp->otg->gadget); + break; + case USB_EVENT_ENUMERATED: + if (isp->present) + isp->current_max = 1800; + else + isp->current_max = power; break; default: - return NOTIFY_DONE; + goto out; } + power_supply_changed(&isp->psy); +out: + mutex_unlock(&lock); +} + +static int isp1704_notifier_call(struct notifier_block *nb, + unsigned long event, void *power) +{ + struct isp1704_charger *isp = + container_of(nb, struct isp1704_charger, nb); + + isp->event = event; + + if (power) + isp->max_power = *((unsigned *)power); + + schedule_work(&isp->work); + return NOTIFY_OK; } @@ -216,6 +312,12 @@ static int isp1704_charger_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_PRESENT: val->intval = isp->present; break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = isp->online; + break; + case POWER_SUPPLY_PROP_CURRENT_MAX: + val->intval = isp->current_max; + break; case POWER_SUPPLY_PROP_MODEL_NAME: val->strval = isp->model; break; @@ -230,6 +332,8 @@ static int isp1704_charger_get_property(struct power_supply *psy, static enum power_supply_property power_props[] = { POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_CURRENT_MAX, POWER_SUPPLY_PROP_MODEL_NAME, POWER_SUPPLY_PROP_MANUFACTURER, }; -- cgit v1.2.1 From a4607d9f5cbae1aad7f86e8204b57d66c0e14e36 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 4 Nov 2010 16:31:48 +0200 Subject: isp1704_charger: Set isp->dev before anything needs it isp1704_test_ulpi() is the first place that needs isp->dev member, so it must be set before calling the function. Signed-off-by: Heikki Krogerus Signed-off-by: Anton Vorontsov --- drivers/power/isp1704_charger.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c index 10c7cc5fb5f9..77c11f1d72e2 100644 --- a/drivers/power/isp1704_charger.c +++ b/drivers/power/isp1704_charger.c @@ -391,13 +391,13 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev) if (!isp->otg) goto fail0; + isp->dev = &pdev->dev; + platform_set_drvdata(pdev, isp); + ret = isp1704_test_ulpi(isp); if (ret < 0) goto fail1; - isp->dev = &pdev->dev; - platform_set_drvdata(pdev, isp); - isp->psy.name = "isp1704"; isp->psy.type = POWER_SUPPLY_TYPE_USB; isp->psy.properties = power_props; -- cgit v1.2.1 From e1a85694e08d03efae9e08fdb292dfd4870837bc Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Mon, 8 Nov 2010 12:22:40 +0200 Subject: isp1704_charger: Detect charger after probe If the device is booted up with cable connected, or the module is loaded after plugging in the cable, the notification has come and gone, so not relying on it at probe time. Instead this checks the VBUS level manually after probe. Signed-off-by: Heikki Krogerus Signed-off-by: Anton Vorontsov --- drivers/power/isp1704_charger.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c index 77c11f1d72e2..2ad9b14a5ce3 100644 --- a/drivers/power/isp1704_charger.c +++ b/drivers/power/isp1704_charger.c @@ -422,6 +422,23 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev) dev_info(isp->dev, "registered with product id %s\n", isp->model); + /* + * Taking over the D+ pullup. + * + * FIXME: The device will be disconnected if it was already + * enumerated. The charger driver should be always loaded before any + * gadget is loaded. + */ + if (isp->otg->gadget) + usb_gadget_disconnect(isp->otg->gadget); + + /* Detect charger if VBUS is valid (the cable was already plugged). */ + ret = otg_io_read(isp->otg, ULPI_USB_INT_STS); + if ((ret & ULPI_INT_VBUS_VALID) && !isp->otg->default_a) { + isp->event = USB_EVENT_VBUS; + schedule_work(&isp->work); + } + return 0; fail2: power_supply_unregister(&isp->psy); -- cgit v1.2.1 From 8477cedb49c69ce64b603d76c7776811eec0f9d7 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 11 Nov 2010 19:00:53 +0100 Subject: jz4740-battery: Check if platform_data is supplied Currently platform_data is dereferenced without checking whether it is actually set, which can lead to kernel crashes. This patch adds a check which will abort the drivers probe function gracefully if no platform_data is supplied. Signed-off-by: Lars-Peter Clausen Signed-off-by: Anton Vorontsov --- drivers/power/jz4740-battery.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/power/jz4740-battery.c b/drivers/power/jz4740-battery.c index 2bbe04ae13a7..5b4821593201 100644 --- a/drivers/power/jz4740-battery.c +++ b/drivers/power/jz4740-battery.c @@ -246,6 +246,11 @@ static int __devinit jz_battery_probe(struct platform_device *pdev) struct jz_battery *jz_battery; struct power_supply *battery; + if (!pdata) { + dev_err(&pdev->dev, "No platform_data supplied\n"); + return -ENXIO; + } + jz_battery = kzalloc(sizeof(*jz_battery), GFP_KERNEL); if (!jz_battery) { dev_err(&pdev->dev, "Failed to allocate driver structure\n"); -- cgit v1.2.1 From 5b275ce27077d6463ca28c9671dce7c2c1f622e2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 11 Nov 2010 15:27:29 +0000 Subject: thermal: make ops constant And while touching that function definition do something about the disaster of formatting there. Signed-off-by: Alan Cox Acked-by: Zhang Rui Signed-off-by: Len Brown --- drivers/thermal/thermal_sys.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 13c72c629329..bde3477c1c6b 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -823,11 +823,8 @@ static struct class thermal_class = { * @devdata: device private data. * @ops: standard thermal cooling devices callbacks. */ -struct thermal_cooling_device *thermal_cooling_device_register(char *type, - void *devdata, - struct - thermal_cooling_device_ops - *ops) +struct thermal_cooling_device *thermal_cooling_device_register( + char *type, void *devdata, const struct thermal_cooling_device_ops *ops) { struct thermal_cooling_device *cdev; struct thermal_zone_device *pos; @@ -1048,13 +1045,9 @@ EXPORT_SYMBOL(thermal_zone_device_update); * section 11.1.5.1 of the ACPI specification 3.0. */ struct thermal_zone_device *thermal_zone_device_register(char *type, - int trips, - void *devdata, struct - thermal_zone_device_ops - *ops, int tc1, int - tc2, - int passive_delay, - int polling_delay) + int trips, void *devdata, + const struct thermal_zone_device_ops *ops, + int tc1, int tc2, int passive_delay, int polling_delay) { struct thermal_zone_device *tz; struct thermal_cooling_device *pos; -- cgit v1.2.1 From 66bde0b70aa2e348ac2c9b9626743c1402b9d466 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 28 Oct 2010 15:41:56 +0200 Subject: dma/intel_mid_dma: remove unneeded null check Smatch complains because we dereference "mid" before checking it. It turns out that "mid" is always a valid pointer here so we can just remove the check. Signed-off-by: Dan Carpenter Signed-off-by: Dan Williams --- drivers/dma/intel_mid_dma.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c index 338bc4eed1f3..41941d05bfb9 100644 --- a/drivers/dma/intel_mid_dma.c +++ b/drivers/dma/intel_mid_dma.c @@ -1021,11 +1021,6 @@ static irqreturn_t intel_mid_dma_interrupt(int irq, void *data) /*DMA Interrupt*/ pr_debug("MDMA:Got an interrupt on irq %d\n", irq); - if (!mid) { - pr_err("ERR_MDMA:null pointer mid\n"); - return -EINVAL; - } - pr_debug("MDMA: Status %x, Mask %x\n", tfr_status, mid->intr_mask); tfr_status &= mid->intr_mask; if (tfr_status) { -- cgit v1.2.1 From 3345cc4f6d779753810c7f13aab6b29417869548 Mon Sep 17 00:00:00 2001 From: Guillaume LECERF Date: Fri, 29 Oct 2010 16:17:49 +0200 Subject: mtd: bcm963xx-flash: try JEDEC probe if CFI fails Signed-off-by: Guillaume LECERF Acked-by: Florian Fainelli Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/bcm963xx-flash.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/maps/bcm963xx-flash.c b/drivers/mtd/maps/bcm963xx-flash.c index d175c120ee84..1f3049590d9e 100644 --- a/drivers/mtd/maps/bcm963xx-flash.c +++ b/drivers/mtd/maps/bcm963xx-flash.c @@ -196,10 +196,15 @@ static int bcm963xx_probe(struct platform_device *pdev) bcm963xx_mtd_info = do_map_probe("cfi_probe", &bcm963xx_map); if (!bcm963xx_mtd_info) { dev_err(&pdev->dev, "failed to probe using CFI\n"); + bcm963xx_mtd_info = do_map_probe("jedec_probe", &bcm963xx_map); + if (bcm963xx_mtd_info) + goto probe_ok; + dev_err(&pdev->dev, "failed to probe using JEDEC\n"); err = -EIO; goto err_probe; } +probe_ok: bcm963xx_mtd_info->owner = THIS_MODULE; /* This is mutually exclusive */ -- cgit v1.2.1 From b7b6e08f9265db56129931983fc6c06d62c9f4f9 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 30 Oct 2010 07:35:02 +0100 Subject: mtd: Fix MTD_OF_PARTS for all arch and minor tidy of MTD_PARTITIONS MTD_OF_PARTS should be possible on all architectures, not just powerpc and microblaze, and it probably should not be a user selectable option. Neither does it need to be in a separate module. Also, rework MTD Kconfig to group options dependant on MTD_PARTITIONS into a if/endif block. Do the same for MTD_REDBOOT_PARTS. Signed-off-by: Grant Likely Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/Kconfig | 19 +++++++++++-------- drivers/mtd/Makefile | 2 +- 2 files changed, 12 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 1e2cbf5d9aa1..77414702cb00 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -53,9 +53,10 @@ config MTD_PARTITIONS devices. Partitioning on NFTL 'devices' is a different - that's the 'normal' form of partitioning used on a block device. +if MTD_PARTITIONS + config MTD_REDBOOT_PARTS tristate "RedBoot partition table parsing" - depends on MTD_PARTITIONS ---help--- RedBoot is a ROM monitor and bootloader which deals with multiple 'images' in flash devices by putting a table one of the erase @@ -72,9 +73,10 @@ config MTD_REDBOOT_PARTS SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for example. +if MTD_REDBOOT_PARTS + config MTD_REDBOOT_DIRECTORY_BLOCK int "Location of RedBoot partition table" - depends on MTD_REDBOOT_PARTS default "-1" ---help--- This option is the Linux counterpart to the @@ -91,18 +93,18 @@ config MTD_REDBOOT_DIRECTORY_BLOCK config MTD_REDBOOT_PARTS_UNALLOCATED bool "Include unallocated flash regions" - depends on MTD_REDBOOT_PARTS help If you need to register each unallocated flash region as a MTD 'partition', enable this option. config MTD_REDBOOT_PARTS_READONLY bool "Force read-only for RedBoot system images" - depends on MTD_REDBOOT_PARTS help If you need to force read-only for 'RedBoot', 'RedBoot Config' and 'FIS directory' images, enable this option. +endif # MTD_REDBOOT_PARTS + config MTD_CMDLINE_PARTS bool "Command line partition table parsing" depends on MTD_PARTITIONS = "y" && MTD = "y" @@ -142,7 +144,7 @@ config MTD_CMDLINE_PARTS config MTD_AFS_PARTS tristate "ARM Firmware Suite partition parsing" - depends on ARM && MTD_PARTITIONS + depends on ARM ---help--- The ARM Firmware Suite allows the user to divide flash devices into multiple 'images'. Each such image has a header containing its name @@ -158,8 +160,8 @@ config MTD_AFS_PARTS example. config MTD_OF_PARTS - tristate "Flash partition map based on OF description" - depends on (MICROBLAZE || PPC_OF) && MTD_PARTITIONS + def_bool y + depends on OF help This provides a partition parsing function which derives the partition map from the children of the flash node, @@ -167,10 +169,11 @@ config MTD_OF_PARTS config MTD_AR7_PARTS tristate "TI AR7 partitioning support" - depends on MTD_PARTITIONS ---help--- TI AR7 partitioning support +endif # MTD_PARTITIONS + comment "User Modules And Translation Layers" config MTD_CHAR diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 760abc533395..d4e7f25b1ebb 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -6,13 +6,13 @@ obj-$(CONFIG_MTD) += mtd.o mtd-y := mtdcore.o mtdsuper.o mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o +mtd-$(CONFIG_MTD_OF_PARTS) += ofpart.o obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o obj-$(CONFIG_MTD_AFS_PARTS) += afs.o obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o -obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o # 'Users' - code which presents functionality to userspace. obj-$(CONFIG_MTD_CHAR) += mtdchar.o -- cgit v1.2.1 From f0dff9bd00d2cffea160fb3fa015b77607458634 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Sat, 30 Oct 2010 21:11:02 -0700 Subject: mtd: m25p80: Reinstate error print on unrecognized flash Commit b34bc037b26e621e5fc13466767e4da110a7b3d3 removed the "unrecognized JEDEC id" error message, causing the probe function to silently abort if the flash ID is unrecognized. It is desirable to produce diagnostic output in this situation so that the user has some idea what went wrong. Signed-off-by: Kevin Cernekee Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index bf5a002209bd..80404e1a4d5e 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -764,6 +764,7 @@ static const struct spi_device_id *__devinit jedec_probe(struct spi_device *spi) return &m25p_ids[tmp]; } } + dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec); return ERR_PTR(-ENODEV); } -- cgit v1.2.1 From 4b7f7422b0331e802f8b7c593e058ccee981cff5 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Sat, 30 Oct 2010 21:11:03 -0700 Subject: mtd: m25p80: Add support for Macronix MX25L25635E This is a 256Mbit (32MiB) part so minor changes were made to support 4-byte addressing. Signed-off-by: Kevin Cernekee Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 80404e1a4d5e..96ae54e9650e 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -51,6 +51,10 @@ #define OPCODE_WRDI 0x04 /* Write disable */ #define OPCODE_AAI_WP 0xad /* Auto address increment word program */ +/* Used for Macronix flashes only. */ +#define OPCODE_EN4B 0xb7 /* Enter 4-byte mode */ +#define OPCODE_EX4B 0xe9 /* Exit 4-byte mode */ + /* Status Register bits. */ #define SR_WIP 1 /* Write in progress */ #define SR_WEL 2 /* Write enable latch */ @@ -62,7 +66,7 @@ /* Define max times to check status register before we give up. */ #define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */ -#define MAX_CMD_SIZE 4 +#define MAX_CMD_SIZE 5 #ifdef CONFIG_M25PXX_USE_FAST_READ #define OPCODE_READ OPCODE_FAST_READ @@ -151,6 +155,16 @@ static inline int write_disable(struct m25p *flash) return spi_write_then_read(flash->spi, &code, 1, NULL, 0); } +/* + * Enable/disable 4-byte addressing mode. + */ +static inline int set_4byte(struct m25p *flash, int enable) +{ + u8 code = enable ? OPCODE_EN4B : OPCODE_EX4B; + + return spi_write_then_read(flash->spi, &code, 1, NULL, 0); +} + /* * Service routine to read status register until ready, or timeout occurs. * Returns non-zero if error. @@ -207,6 +221,7 @@ static void m25p_addr2cmd(struct m25p *flash, unsigned int addr, u8 *cmd) cmd[1] = addr >> (flash->addr_width * 8 - 8); cmd[2] = addr >> (flash->addr_width * 8 - 16); cmd[3] = addr >> (flash->addr_width * 8 - 24); + cmd[4] = addr >> (flash->addr_width * 8 - 32); } static int m25p_cmdsz(struct m25p *flash) @@ -607,7 +622,6 @@ struct flash_info { .sector_size = (_sector_size), \ .n_sectors = (_n_sectors), \ .page_size = 256, \ - .addr_width = 3, \ .flags = (_flags), \ }) @@ -653,6 +667,7 @@ static const struct spi_device_id m25p_ids[] = { { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, 0) }, { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, + { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) }, /* Spansion -- single (large) sector size only, at least * for the chips listed here (without boot sectors). @@ -884,7 +899,17 @@ static int __devinit m25p_probe(struct spi_device *spi) flash->mtd.dev.parent = &spi->dev; flash->page_size = info->page_size; - flash->addr_width = info->addr_width; + + if (info->addr_width) + flash->addr_width = info->addr_width; + else { + /* enable 4-byte addressing if the device exceeds 16MiB */ + if (flash->mtd.size > 0x1000000) { + flash->addr_width = 4; + set_4byte(flash, 1); + } else + flash->addr_width = 3; + } dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name, (long long)flash->mtd.size >> 10); -- cgit v1.2.1 From ac622f583dccb025250becd2d4e60badaf571713 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Sat, 30 Oct 2010 21:11:04 -0700 Subject: mtd: m25p80: Add support for Macronix MX25L25655E Untested, but expected to be compatible with MX25L25635E which I did test. Signed-off-by: Kevin Cernekee Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 96ae54e9650e..eabe5fb071c6 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -668,6 +668,7 @@ static const struct spi_device_id m25p_ids[] = { { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) }, + { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, /* Spansion -- single (large) sector size only, at least * for the chips listed here (without boot sectors). -- cgit v1.2.1 From daf05ec00c6e60a2c705820e7f93cbd31c804fe3 Mon Sep 17 00:00:00 2001 From: srimugunthan Date: Sat, 13 Nov 2010 12:46:05 +0200 Subject: mtd: nandsim: spell fixes in comments Signed-off-by: srimugunthan Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nandsim.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index a6a73aab1253..c45e06fba154 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -210,12 +210,12 @@ MODULE_PARM_DESC(bbt, "0 OOB, 1 BBT with marker in OOB, 2 BBT with marker in d #define STATE_CMD_READ0 0x00000001 /* read data from the beginning of page */ #define STATE_CMD_READ1 0x00000002 /* read data from the second half of page */ #define STATE_CMD_READSTART 0x00000003 /* read data second command (large page devices) */ -#define STATE_CMD_PAGEPROG 0x00000004 /* start page programm */ +#define STATE_CMD_PAGEPROG 0x00000004 /* start page program */ #define STATE_CMD_READOOB 0x00000005 /* read OOB area */ #define STATE_CMD_ERASE1 0x00000006 /* sector erase first command */ #define STATE_CMD_STATUS 0x00000007 /* read status */ #define STATE_CMD_STATUS_M 0x00000008 /* read multi-plane status (isn't implemented) */ -#define STATE_CMD_SEQIN 0x00000009 /* sequential data imput */ +#define STATE_CMD_SEQIN 0x00000009 /* sequential data input */ #define STATE_CMD_READID 0x0000000A /* read ID */ #define STATE_CMD_ERASE2 0x0000000B /* sector erase second command */ #define STATE_CMD_RESET 0x0000000C /* reset */ @@ -230,7 +230,7 @@ MODULE_PARM_DESC(bbt, "0 OOB, 1 BBT with marker in OOB, 2 BBT with marker in d #define STATE_ADDR_ZERO 0x00000040 /* one byte zero address was accepted */ #define STATE_ADDR_MASK 0x00000070 /* address states mask */ -/* Durind data input/output the simulator is in these states */ +/* During data input/output the simulator is in these states */ #define STATE_DATAIN 0x00000100 /* waiting for data input */ #define STATE_DATAIN_MASK 0x00000100 /* data input states mask */ @@ -248,7 +248,7 @@ MODULE_PARM_DESC(bbt, "0 OOB, 1 BBT with marker in OOB, 2 BBT with marker in d /* Simulator's actions bit masks */ #define ACTION_CPY 0x00100000 /* copy page/OOB to the internal buffer */ -#define ACTION_PRGPAGE 0x00200000 /* programm the internal buffer to flash */ +#define ACTION_PRGPAGE 0x00200000 /* program the internal buffer to flash */ #define ACTION_SECERASE 0x00300000 /* erase sector */ #define ACTION_ZEROOFF 0x00400000 /* don't add any offset to address */ #define ACTION_HALFOFF 0x00500000 /* add to address half of page */ @@ -263,18 +263,18 @@ MODULE_PARM_DESC(bbt, "0 OOB, 1 BBT with marker in OOB, 2 BBT with marker in d #define OPT_PAGE512 0x00000002 /* 512-byte page chips */ #define OPT_PAGE2048 0x00000008 /* 2048-byte page chips */ #define OPT_SMARTMEDIA 0x00000010 /* SmartMedia technology chips */ -#define OPT_AUTOINCR 0x00000020 /* page number auto inctimentation is possible */ +#define OPT_AUTOINCR 0x00000020 /* page number auto incrementation is possible */ #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */ #define OPT_PAGE4096 0x00000080 /* 4096-byte page chips */ #define OPT_LARGEPAGE (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */ #define OPT_SMALLPAGE (OPT_PAGE256 | OPT_PAGE512) /* 256 and 512-byte page chips */ -/* Remove action bits ftom state */ +/* Remove action bits from state */ #define NS_STATE(x) ((x) & ~ACTION_MASK) /* * Maximum previous states which need to be saved. Currently saving is - * only needed for page programm operation with preceeded read command + * only needed for page program operation with preceded read command * (which is only valid for 512-byte pages). */ #define NS_MAX_PREVSTATES 1 @@ -380,16 +380,16 @@ static struct nandsim_operations { /* Read OOB */ {OPT_SMALLPAGE, {STATE_CMD_READOOB | ACTION_OOBOFF, STATE_ADDR_PAGE | ACTION_CPY, STATE_DATAOUT, STATE_READY}}, - /* Programm page starting from the beginning */ + /* Program page starting from the beginning */ {OPT_ANY, {STATE_CMD_SEQIN, STATE_ADDR_PAGE, STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}}, - /* Programm page starting from the beginning */ + /* Program page starting from the beginning */ {OPT_SMALLPAGE, {STATE_CMD_READ0, STATE_CMD_SEQIN | ACTION_ZEROOFF, STATE_ADDR_PAGE, STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}}, - /* Programm page starting from the second half */ + /* Program page starting from the second half */ {OPT_PAGE512, {STATE_CMD_READ1, STATE_CMD_SEQIN | ACTION_HALFOFF, STATE_ADDR_PAGE, STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}}, - /* Programm OOB */ + /* Program OOB */ {OPT_SMALLPAGE, {STATE_CMD_READOOB, STATE_CMD_SEQIN | ACTION_OOBOFF, STATE_ADDR_PAGE, STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}}, /* Erase sector */ @@ -1171,9 +1171,9 @@ static inline void switch_to_ready_state(struct nandsim *ns, u_char status) * of supported operations. * * Operation can be unknown because of the following. - * 1. New command was accepted and this is the firs call to find the + * 1. New command was accepted and this is the first call to find the * correspondent states chain. In this case ns->npstates = 0; - * 2. There is several operations which begin with the same command(s) + * 2. There are several operations which begin with the same command(s) * (for example program from the second half and read from the * second half operations both begin with the READ1 command). In this * case the ns->pstates[] array contains previous states. @@ -1186,7 +1186,7 @@ static inline void switch_to_ready_state(struct nandsim *ns, u_char status) * ns->ops, ns->state, ns->nxstate are initialized, ns->npstate is * zeroed). * - * If there are several maches, the current state is pushed to the + * If there are several matches, the current state is pushed to the * ns->pstates. * * The operation can be unknown only while commands are input to the chip. @@ -1195,10 +1195,10 @@ static inline void switch_to_ready_state(struct nandsim *ns, u_char status) * operation is searched using the following pattern: * ns->pstates[0], ... ns->pstates[ns->npstates],
* - * It is supposed that this pattern must either match one operation on + * It is supposed that this pattern must either match one operation or * none. There can't be ambiguity in that case. * - * If no matches found, the functions does the following: + * If no matches found, the function does the following: * 1. if there are saved states present, try to ignore them and search * again only using the last command. If nothing was found, switch * to the STATE_READY state. @@ -1668,7 +1668,7 @@ static int do_state_action(struct nandsim *ns, uint32_t action) case ACTION_PRGPAGE: /* - * Programm page - move internal buffer data to the page. + * Program page - move internal buffer data to the page. */ if (ns->lines.wp) { @@ -1933,7 +1933,7 @@ static u_char ns_nand_read_byte(struct mtd_info *mtd) NS_DBG("read_byte: all bytes were read\n"); /* - * The OPT_AUTOINCR allows to read next conseqitive pages without + * The OPT_AUTOINCR allows to read next consecutive pages without * new read operation cycle. */ if ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT) { -- cgit v1.2.1 From 08b3af3092bb2c284796e4e823c5309c2d0a9bca Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Tue, 2 Nov 2010 10:28:46 +0900 Subject: mtd: OneNAND: Fix page offset handling at 2KiB pagesize When use the 2KiB pagesize, it should be set the correct page offset. Signed-off-by: Kyungmin Park Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/onenand/samsung.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c index 0de7a05e6de0..a4c74a9ba430 100644 --- a/drivers/mtd/onenand/samsung.c +++ b/drivers/mtd/onenand/samsung.c @@ -651,7 +651,7 @@ static int s5pc110_read_bufferram(struct mtd_info *mtd, int area, void __iomem *p; void *buf = (void *) buffer; dma_addr_t dma_src, dma_dst; - int err, page_dma = 0; + int err, ofs, page_dma = 0; struct device *dev = &onenand->pdev->dev; p = this->base + area; @@ -677,10 +677,13 @@ static int s5pc110_read_bufferram(struct mtd_info *mtd, int area, if (!page) goto normal; + /* Page offset */ + ofs = ((size_t) buf & ~PAGE_MASK); page_dma = 1; + /* DMA routine */ dma_src = onenand->phys_base + (p - this->base); - dma_dst = dma_map_page(dev, page, 0, count, DMA_FROM_DEVICE); + dma_dst = dma_map_page(dev, page, ofs, count, DMA_FROM_DEVICE); } else { /* DMA routine */ dma_src = onenand->phys_base + (p - this->base); -- cgit v1.2.1 From 309b5e4e4154721f8079bc250d2233fd4b3aa039 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 4 Nov 2010 20:07:40 -0700 Subject: mtd: use vzalloc Signed-off-by: Joe Perches Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nandsim.c | 3 +-- drivers/mtd/ubi/vtbl.c | 6 ++---- 2 files changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index c45e06fba154..a5aa99f014ba 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -470,7 +470,7 @@ static int alloc_device(struct nandsim *ns) err = -EINVAL; goto err_close; } - ns->pages_written = vmalloc(ns->geom.pgnum); + ns->pages_written = vzalloc(ns->geom.pgnum); if (!ns->pages_written) { NS_ERR("alloc_device: unable to allocate pages written array\n"); err = -ENOMEM; @@ -483,7 +483,6 @@ static int alloc_device(struct nandsim *ns) goto err_free; } ns->cfile = cfile; - memset(ns->pages_written, 0, ns->geom.pgnum); return 0; } diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c index fcdb7f65fe0b..0b8141fc5c26 100644 --- a/drivers/mtd/ubi/vtbl.c +++ b/drivers/mtd/ubi/vtbl.c @@ -425,12 +425,11 @@ static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi, /* Read both LEB 0 and LEB 1 into memory */ ubi_rb_for_each_entry(rb, seb, &sv->root, u.rb) { - leb[seb->lnum] = vmalloc(ubi->vtbl_size); + leb[seb->lnum] = vzalloc(ubi->vtbl_size); if (!leb[seb->lnum]) { err = -ENOMEM; goto out_free; } - memset(leb[seb->lnum], 0, ubi->vtbl_size); err = ubi_io_read_data(ubi, leb[seb->lnum], seb->pnum, 0, ubi->vtbl_size); @@ -516,10 +515,9 @@ static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi, int i; struct ubi_vtbl_record *vtbl; - vtbl = vmalloc(ubi->vtbl_size); + vtbl = vzalloc(ubi->vtbl_size); if (!vtbl) return ERR_PTR(-ENOMEM); - memset(vtbl, 0, ubi->vtbl_size); for (i = 0; i < ubi->vtbl_slots; i++) memcpy(&vtbl[i], &empty_vtbl_record, UBI_VTBL_RECORD_SIZE); -- cgit v1.2.1 From d19d7b46d2b4936be14cfeef779ffeb76cf7b757 Mon Sep 17 00:00:00 2001 From: Roman Tereshonkov Date: Wed, 3 Nov 2010 12:55:20 +0200 Subject: mtd: onenand: fix omap2 code to handle cache program feature Some fixes are introduced into omap2 code to handle errors when cache program feature is used. Signed-off-by: Roman Tereshonkov Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/onenand/omap2.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 9f322f1a7f22..da25a90af4a4 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -108,8 +108,9 @@ static void wait_warn(char *msg, int state, unsigned int ctrl, static int omap2_onenand_wait(struct mtd_info *mtd, int state) { struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); + struct onenand_chip *this = mtd->priv; unsigned int intr = 0; - unsigned int ctrl; + unsigned int ctrl, ctrl_mask; unsigned long timeout; u32 syscfg; @@ -180,7 +181,8 @@ retry: if (result == 0) { /* Timeout after 20ms */ ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS); - if (ctrl & ONENAND_CTRL_ONGO) { + if (ctrl & ONENAND_CTRL_ONGO && + !this->ongoing) { /* * The operation seems to be still going * so give it some more time. @@ -269,7 +271,11 @@ retry: return -EIO; } - if (ctrl & 0xFE9F) + ctrl_mask = 0xFE9F; + if (this->ongoing) + ctrl_mask &= ~0x8000; + + if (ctrl & ctrl_mask) wait_warn("unexpected controller status", state, ctrl, intr); return 0; -- cgit v1.2.1 From ac80dac00f8630803dc0c7f8fbe6983a8e2a8b5f Mon Sep 17 00:00:00 2001 From: Roman Tereshonkov Date: Wed, 3 Nov 2010 12:55:21 +0200 Subject: mtd: onenand: implement cache program feature for 4KiB page onenand Implement cache program feature for 4KiB page onenand. This feature improves the write data performance. The observed 128KiB data program speed change is from 8827KiB/s to 14156 KiB/s when the feature is enabled. Signed-off-by: Roman Tereshonkov Acked-by: Mike Frysinger Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/onenand/onenand_base.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 6b3a875647c9..4d6e6c54cc2c 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -1845,7 +1845,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to, const u_char *buf = ops->datbuf; const u_char *oob = ops->oobbuf; u_char *oobbuf; - int ret = 0; + int ret = 0, cmd; DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n", __func__, (unsigned int) to, (int) len); @@ -1954,7 +1954,19 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to, ONENAND_SET_NEXT_BUFFERRAM(this); } - this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize); + this->ongoing = 0; + cmd = ONENAND_CMD_PROG; + + /* Exclude 1st OTP and OTP blocks for cache program feature */ + if (ONENAND_IS_CACHE_PROGRAM(this) && + likely(onenand_block(this, to) != 0) && + ONENAND_IS_4KB_PAGE(this) && + ((written + thislen) < len)) { + cmd = ONENAND_CMD_2X_CACHE_PROG; + this->ongoing = 1; + } + + this->command(mtd, cmd, to, mtd->writesize); /* * 2 PLANE, MLC, and Flex-OneNAND wait here @@ -3377,8 +3389,10 @@ static void onenand_check_features(struct mtd_info *mtd) case ONENAND_DEVICE_DENSITY_4Gb: if (ONENAND_IS_DDP(this)) this->options |= ONENAND_HAS_2PLANE; - else if (numbufs == 1) + else if (numbufs == 1) { this->options |= ONENAND_HAS_4KB_PAGE; + this->options |= ONENAND_HAS_CACHE_PROGRAM; + } case ONENAND_DEVICE_DENSITY_2Gb: /* 2Gb DDP does not have 2 plane */ @@ -3415,6 +3429,8 @@ static void onenand_check_features(struct mtd_info *mtd) printk(KERN_DEBUG "Chip has 2 plane\n"); if (this->options & ONENAND_HAS_4KB_PAGE) printk(KERN_DEBUG "Chip has 4KiB pagesize\n"); + if (this->options & ONENAND_HAS_CACHE_PROGRAM) + printk(KERN_DEBUG "Chip has cache program feature\n"); } /** -- cgit v1.2.1 From a0c5a3944ce121bb2417c771f77b18485cd84e18 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Sat, 6 Nov 2010 17:41:24 +0300 Subject: mtd: mtdchar: fix information leak to userland Structure mtd_info_user is copied to userland with padding byted between "type" and "flags" fields uninitialized. It leads to leaking of contents of kernel stack memory. Signed-off-by: Vasiliy Kulikov Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdchar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 4759d827e8c7..cad8fcc7b239 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -601,6 +601,7 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg) } case MEMGETINFO: + memset(&info, 0, sizeof(info)); info.type = mtd->type; info.flags = mtd->flags; info.size = mtd->size; @@ -609,7 +610,6 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg) info.oobsize = mtd->oobsize; /* The below fields are obsolete */ info.ecctype = -1; - info.eccsize = 0; if (copy_to_user(argp, &info, sizeof(struct mtd_info_user))) return -EFAULT; break; -- cgit v1.2.1 From ce4a37f7c93e9b12ac1452bedd823d73c43c0e63 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Tue, 9 Nov 2010 00:09:02 +0100 Subject: mtd: remove unnecessary casts of void ptr returning alloc function return values The [vk][cmz]alloc(_node) family of functions return void pointers which it's completely unnecessary/pointless to cast to other pointer types since that happens implicitly. This patch removes such casts from drivers/mtd/ Signed-off-by: Jesper Juhl Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/tqm8xxl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/tqm8xxl.c b/drivers/mtd/maps/tqm8xxl.c index 60146984f4be..c08e140d40ed 100644 --- a/drivers/mtd/maps/tqm8xxl.c +++ b/drivers/mtd/maps/tqm8xxl.c @@ -139,7 +139,7 @@ static int __init init_tqm_mtd(void) goto error_mem; } - map_banks[idx]->name = (char *)kmalloc(16, GFP_KERNEL); + map_banks[idx]->name = kmalloc(16, GFP_KERNEL); if (!map_banks[idx]->name) { ret = -ENOMEM; -- cgit v1.2.1 From a338adafed0d09d823169161e938b1eab4dce901 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 11 Nov 2010 19:02:47 +0100 Subject: mtd: NAND: jz4740: Make 'struct platform_driver jz_nand_driver' static Signed-off-by: Lars-Peter Clausen Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/jz4740_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c index 67343fc31bd5..c9e2a59fd640 100644 --- a/drivers/mtd/nand/jz4740_nand.c +++ b/drivers/mtd/nand/jz4740_nand.c @@ -489,7 +489,7 @@ static int __devexit jz_nand_remove(struct platform_device *pdev) return 0; } -struct platform_driver jz_nand_driver = { +static struct platform_driver jz_nand_driver = { .probe = jz_nand_probe, .remove = __devexit_p(jz_nand_remove), .driver = { -- cgit v1.2.1 From 9118ea321ee320e3c670540122857ff0eba91e32 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 11 Nov 2010 19:02:48 +0100 Subject: mtd: NAND: jz4740: Remove custom {read,write}_page handlers Now that the mtd core supports more then 64 ecc bytes we can use it instead of some a custom hack in the jz4740 nand driver. This patch removes the custom {read,write}_page handlers from the jz4740 nand driver. Thus the driver will now fallback to the default handlers from the nand core. Signed-off-by: Lars-Peter Clausen Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/jz4740_nand.c | 55 ------------------------------------------ 1 file changed, 55 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c index c9e2a59fd640..cea38a5d4ac5 100644 --- a/drivers/mtd/nand/jz4740_nand.c +++ b/drivers/mtd/nand/jz4740_nand.c @@ -251,58 +251,6 @@ static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat, return 0; } - -/* Copy paste of nand_read_page_hwecc_oob_first except for different eccpos - * handling. The ecc area is for 4k chips 72 bytes long and thus does not fit - * into the eccpos array. */ -static int jz_nand_read_page_hwecc_oob_first(struct mtd_info *mtd, - struct nand_chip *chip, uint8_t *buf, int page) -{ - int i, eccsize = chip->ecc.size; - int eccbytes = chip->ecc.bytes; - int eccsteps = chip->ecc.steps; - uint8_t *p = buf; - unsigned int ecc_offset = chip->page_shift; - - /* Read the OOB area first */ - chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); - chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); - chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); - - for (i = ecc_offset; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - int stat; - - chip->ecc.hwctl(mtd, NAND_ECC_READ); - chip->read_buf(mtd, p, eccsize); - - stat = chip->ecc.correct(mtd, p, &chip->oob_poi[i], NULL); - if (stat < 0) - mtd->ecc_stats.failed++; - else - mtd->ecc_stats.corrected += stat; - } - return 0; -} - -/* Copy-and-paste of nand_write_page_hwecc with different eccpos handling. */ -static void jz_nand_write_page_hwecc(struct mtd_info *mtd, - struct nand_chip *chip, const uint8_t *buf) -{ - int i, eccsize = chip->ecc.size; - int eccbytes = chip->ecc.bytes; - int eccsteps = chip->ecc.steps; - const uint8_t *p = buf; - unsigned int ecc_offset = chip->page_shift; - - for (i = ecc_offset; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - chip->ecc.hwctl(mtd, NAND_ECC_WRITE); - chip->write_buf(mtd, p, eccsize); - chip->ecc.calculate(mtd, p, &chip->oob_poi[i]); - } - - chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); -} - #ifdef CONFIG_MTD_CMDLINE_PARTS static const char *part_probes[] = {"cmdline", NULL}; #endif @@ -393,9 +341,6 @@ static int __devinit jz_nand_probe(struct platform_device *pdev) chip->ecc.size = 512; chip->ecc.bytes = 9; - chip->ecc.read_page = jz_nand_read_page_hwecc_oob_first; - chip->ecc.write_page = jz_nand_write_page_hwecc; - if (pdata) chip->ecc.layout = pdata->ecc_layout; -- cgit v1.2.1 From f9a5279c70af10e967872e922b91310a91f87b05 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 12 Nov 2010 13:37:57 -0800 Subject: mtd: maps: Use printf extension %pR for struct resource Using %pR standardizes the struct resource output. Signed-off-by: Joe Perches Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/amd76xrom.c | 7 ++----- drivers/mtd/maps/ck804xrom.c | 7 ++----- drivers/mtd/maps/esb2rom.c | 9 +++------ drivers/mtd/maps/ichxrom.c | 9 +++------ drivers/mtd/maps/physmap_of.c | 4 +--- drivers/mtd/maps/scx200_docflash.c | 5 ++--- 6 files changed, 13 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c index 19fe92db0c46..77d64ce19e9f 100644 --- a/drivers/mtd/maps/amd76xrom.c +++ b/drivers/mtd/maps/amd76xrom.c @@ -149,11 +149,8 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev, if (request_resource(&iomem_resource, &window->rsrc)) { window->rsrc.parent = NULL; printk(KERN_ERR MOD_NAME - " %s(): Unable to register resource" - " 0x%.16llx-0x%.16llx - kernel bug?\n", - __func__, - (unsigned long long)window->rsrc.start, - (unsigned long long)window->rsrc.end); + " %s(): Unable to register resource %pR - kernel bug?\n", + __func__, &window->rsrc); } diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c index ddb462bea9b5..5fdb7b26cea3 100644 --- a/drivers/mtd/maps/ck804xrom.c +++ b/drivers/mtd/maps/ck804xrom.c @@ -178,11 +178,8 @@ static int __devinit ck804xrom_init_one (struct pci_dev *pdev, if (request_resource(&iomem_resource, &window->rsrc)) { window->rsrc.parent = NULL; printk(KERN_ERR MOD_NAME - " %s(): Unable to register resource" - " 0x%.016llx-0x%.016llx - kernel bug?\n", - __func__, - (unsigned long long)window->rsrc.start, - (unsigned long long)window->rsrc.end); + " %s(): Unable to register resource %pR - kernel bug?\n", + __func__, &window->rsrc); } diff --git a/drivers/mtd/maps/esb2rom.c b/drivers/mtd/maps/esb2rom.c index d12c93dc1aad..4feb7507ab7c 100644 --- a/drivers/mtd/maps/esb2rom.c +++ b/drivers/mtd/maps/esb2rom.c @@ -242,12 +242,9 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev, window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY; if (request_resource(&iomem_resource, &window->rsrc)) { window->rsrc.parent = NULL; - printk(KERN_DEBUG MOD_NAME - ": %s(): Unable to register resource" - " 0x%.08llx-0x%.08llx - kernel bug?\n", - __func__, - (unsigned long long)window->rsrc.start, - (unsigned long long)window->rsrc.end); + printk(KERN_DEBUG MOD_NAME ": " + "%s(): Unable to register resource %pR - kernel bug?\n", + __func__, &window->rsrc); } /* Map the firmware hub into my address space. */ diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c index f102bf243a74..1337a4191a0c 100644 --- a/drivers/mtd/maps/ichxrom.c +++ b/drivers/mtd/maps/ichxrom.c @@ -175,12 +175,9 @@ static int __devinit ichxrom_init_one (struct pci_dev *pdev, window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY; if (request_resource(&iomem_resource, &window->rsrc)) { window->rsrc.parent = NULL; - printk(KERN_DEBUG MOD_NAME - ": %s(): Unable to register resource" - " 0x%.16llx-0x%.16llx - kernel bug?\n", - __func__, - (unsigned long long)window->rsrc.start, - (unsigned long long)window->rsrc.end); + printk(KERN_DEBUG MOD_NAME ": " + "%s(): Unable to register resource %pR - kernel bug?\n", + __func__, &window->rsrc); } /* Map the firmware hub into my address space. */ diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index 9861814aa027..8506578e6a35 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -274,9 +274,7 @@ static int __devinit of_flash_probe(struct platform_device *dev, continue; } - dev_dbg(&dev->dev, "of_flash device: %.8llx-%.8llx\n", - (unsigned long long)res.start, - (unsigned long long)res.end); + dev_dbg(&dev->dev, "of_flash device: %pR\n", &res); err = -EBUSY; res_size = resource_size(&res); diff --git a/drivers/mtd/maps/scx200_docflash.c b/drivers/mtd/maps/scx200_docflash.c index b5391ebb736e..027e628a4f1d 100644 --- a/drivers/mtd/maps/scx200_docflash.c +++ b/drivers/mtd/maps/scx200_docflash.c @@ -166,9 +166,8 @@ static int __init init_scx200_docflash(void) outl(pmr, scx200_cb_base + SCx200_PMR); } - printk(KERN_INFO NAME ": DOCCS mapped at 0x%llx-0x%llx, width %d\n", - (unsigned long long)docmem.start, - (unsigned long long)docmem.end, width); + printk(KERN_INFO NAME ": DOCCS mapped at %pR, width %d\n", + &docmem, width); scx200_docflash_map.size = size; if (width == 8) -- cgit v1.2.1 From 23079f94daabc4e06436ab2b643fac31dec017d1 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 12 Nov 2010 13:37:58 -0800 Subject: mtd: nand: Use printf extension %pR for struct resource Using %pR standardizes the struct resource output. Signed-off-by: Joe Perches Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/pasemi_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 6ddb2461d740..bb277a54986f 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -107,7 +107,7 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev, if (pasemi_nand_mtd) return -ENODEV; - pr_debug("pasemi_nand at %llx-%llx\n", res.start, res.end); + pr_debug("pasemi_nand at %pR\n", &res); /* Allocate memory for MTD device structure and private data */ pasemi_nand_mtd = kzalloc(sizeof(struct mtd_info) + -- cgit v1.2.1 From cc31822250236ec173bb2aa149ebe2ba35405db2 Mon Sep 17 00:00:00 2001 From: Guillaume LECERF Date: Wed, 17 Nov 2010 12:35:50 +0100 Subject: mtd: cfi_fixup: remove unused 'param' parameter The 'param' parameter has never been used since its introduction, so simply remove it. Signed-off-by: Guillaume LECERF Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/chips/cfi_cmdset_0001.c | 54 ++++++++++----------- drivers/mtd/chips/cfi_cmdset_0002.c | 94 ++++++++++++++++++------------------- drivers/mtd/chips/cfi_util.c | 2 +- drivers/mtd/chips/fwh_lock.h | 2 +- 4 files changed, 76 insertions(+), 76 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index ad9268b44416..44cbfc093ecc 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -162,7 +162,7 @@ static void cfi_tell_features(struct cfi_pri_intelext *extp) #endif /* Atmel chips don't use the same PRI format as Intel chips */ -static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param) +static void fixup_convert_atmel_pri(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; @@ -202,7 +202,7 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param) cfi->cfiq->BufWriteTimeoutMax = 0; } -static void fixup_at49bv640dx_lock(struct mtd_info *mtd, void *param) +static void fixup_at49bv640dx_lock(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; @@ -214,7 +214,7 @@ static void fixup_at49bv640dx_lock(struct mtd_info *mtd, void *param) #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */ -static void fixup_intel_strataflash(struct mtd_info *mtd, void* param) +static void fixup_intel_strataflash(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; @@ -227,7 +227,7 @@ static void fixup_intel_strataflash(struct mtd_info *mtd, void* param) #endif #ifdef CMDSET0001_DISABLE_WRITE_SUSPEND -static void fixup_no_write_suspend(struct mtd_info *mtd, void* param) +static void fixup_no_write_suspend(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; @@ -240,7 +240,7 @@ static void fixup_no_write_suspend(struct mtd_info *mtd, void* param) } #endif -static void fixup_st_m28w320ct(struct mtd_info *mtd, void* param) +static void fixup_st_m28w320ct(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; @@ -249,7 +249,7 @@ static void fixup_st_m28w320ct(struct mtd_info *mtd, void* param) cfi->cfiq->BufWriteTimeoutMax = 0; /* Not supported */ } -static void fixup_st_m28w320cb(struct mtd_info *mtd, void* param) +static void fixup_st_m28w320cb(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; @@ -259,7 +259,7 @@ static void fixup_st_m28w320cb(struct mtd_info *mtd, void* param) (cfi->cfiq->EraseRegionInfo[1] & 0xffff0000) | 0x3e; }; -static void fixup_use_point(struct mtd_info *mtd, void *param) +static void fixup_use_point(struct mtd_info *mtd) { struct map_info *map = mtd->priv; if (!mtd->point && map_is_linear(map)) { @@ -268,7 +268,7 @@ static void fixup_use_point(struct mtd_info *mtd, void *param) } } -static void fixup_use_write_buffers(struct mtd_info *mtd, void *param) +static void fixup_use_write_buffers(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; @@ -282,7 +282,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd, void *param) /* * Some chips power-up with all sectors locked by default. */ -static void fixup_unlock_powerup_lock(struct mtd_info *mtd, void *param) +static void fixup_unlock_powerup_lock(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; @@ -295,31 +295,31 @@ static void fixup_unlock_powerup_lock(struct mtd_info *mtd, void *param) } static struct cfi_fixup cfi_fixup_table[] = { - { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, - { CFI_MFR_ATMEL, AT49BV640D, fixup_at49bv640dx_lock, NULL }, - { CFI_MFR_ATMEL, AT49BV640DT, fixup_at49bv640dx_lock, NULL }, + { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri }, + { CFI_MFR_ATMEL, AT49BV640D, fixup_at49bv640dx_lock }, + { CFI_MFR_ATMEL, AT49BV640DT, fixup_at49bv640dx_lock }, #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE - { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL }, + { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash }, #endif #ifdef CMDSET0001_DISABLE_WRITE_SUSPEND - { CFI_MFR_ANY, CFI_ID_ANY, fixup_no_write_suspend, NULL }, + { CFI_MFR_ANY, CFI_ID_ANY, fixup_no_write_suspend }, #endif #if !FORCE_WORD_WRITE - { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL }, + { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers }, #endif - { CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct, NULL }, - { CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb, NULL }, - { CFI_MFR_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock, NULL, }, - { 0, 0, NULL, NULL } + { CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct }, + { CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb }, + { CFI_MFR_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock }, + { 0, 0, NULL } }; static struct cfi_fixup jedec_fixup_table[] = { - { CFI_MFR_INTEL, I82802AB, fixup_use_fwh_lock, NULL, }, - { CFI_MFR_INTEL, I82802AC, fixup_use_fwh_lock, NULL, }, - { CFI_MFR_ST, M50LPW080, fixup_use_fwh_lock, NULL, }, - { CFI_MFR_ST, M50FLW080A, fixup_use_fwh_lock, NULL, }, - { CFI_MFR_ST, M50FLW080B, fixup_use_fwh_lock, NULL, }, - { 0, 0, NULL, NULL } + { CFI_MFR_INTEL, I82802AB, fixup_use_fwh_lock }, + { CFI_MFR_INTEL, I82802AC, fixup_use_fwh_lock }, + { CFI_MFR_ST, M50LPW080, fixup_use_fwh_lock }, + { CFI_MFR_ST, M50FLW080A, fixup_use_fwh_lock }, + { CFI_MFR_ST, M50FLW080B, fixup_use_fwh_lock }, + { 0, 0, NULL } }; static struct cfi_fixup fixup_table[] = { /* The CFI vendor ids and the JEDEC vendor IDs appear @@ -327,8 +327,8 @@ static struct cfi_fixup fixup_table[] = { * well. This table is to pick all cases where * we know that is the case. */ - { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_point, NULL }, - { 0, 0, NULL, NULL } + { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_point }, + { 0, 0, NULL } }; static void cfi_fixup_major_minor(struct cfi_private *cfi, diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 3b8e32d87977..9d68ab919f31 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -134,7 +134,7 @@ static void cfi_tell_features(struct cfi_pri_amdstd *extp) #ifdef AMD_BOOTLOC_BUG /* Wheee. Bring me the head of someone at AMD. */ -static void fixup_amd_bootblock(struct mtd_info *mtd, void* param) +static void fixup_amd_bootblock(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; @@ -186,7 +186,7 @@ static void fixup_amd_bootblock(struct mtd_info *mtd, void* param) } #endif -static void fixup_use_write_buffers(struct mtd_info *mtd, void *param) +static void fixup_use_write_buffers(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; @@ -197,7 +197,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd, void *param) } /* Atmel chips don't use the same PRI format as AMD chips */ -static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param) +static void fixup_convert_atmel_pri(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; @@ -228,14 +228,14 @@ static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param) cfi->cfiq->BufWriteTimeoutMax = 0; } -static void fixup_use_secsi(struct mtd_info *mtd, void *param) +static void fixup_use_secsi(struct mtd_info *mtd) { /* Setup for chips with a secsi area */ mtd->read_user_prot_reg = cfi_amdstd_secsi_read; mtd->read_fact_prot_reg = cfi_amdstd_secsi_read; } -static void fixup_use_erase_chip(struct mtd_info *mtd, void *param) +static void fixup_use_erase_chip(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; @@ -250,7 +250,7 @@ static void fixup_use_erase_chip(struct mtd_info *mtd, void *param) * Some Atmel chips (e.g. the AT49BV6416) power-up with all sectors * locked by default. */ -static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param) +static void fixup_use_atmel_lock(struct mtd_info *mtd) { mtd->lock = cfi_atmel_lock; mtd->unlock = cfi_atmel_unlock; @@ -271,7 +271,7 @@ static void fixup_old_sst_eraseregion(struct mtd_info *mtd) cfi->cfiq->NumEraseRegions = 1; } -static void fixup_sst39vf(struct mtd_info *mtd, void *param) +static void fixup_sst39vf(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; @@ -282,7 +282,7 @@ static void fixup_sst39vf(struct mtd_info *mtd, void *param) cfi->addr_unlock2 = 0x2AAA; } -static void fixup_sst39vf_rev_b(struct mtd_info *mtd, void *param) +static void fixup_sst39vf_rev_b(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; @@ -295,12 +295,12 @@ static void fixup_sst39vf_rev_b(struct mtd_info *mtd, void *param) cfi->sector_erase_cmd = CMD(0x50); } -static void fixup_sst38vf640x_sectorsize(struct mtd_info *mtd, void *param) +static void fixup_sst38vf640x_sectorsize(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; - fixup_sst39vf_rev_b(mtd, param); + fixup_sst39vf_rev_b(mtd); /* * CFI reports 1024 sectors (0x03ff+1) of 64KBytes (0x0100*256) where @@ -310,7 +310,7 @@ static void fixup_sst38vf640x_sectorsize(struct mtd_info *mtd, void *param) pr_warning("%s: Bad 38VF640x CFI data; adjusting sector size from 64 to 8KiB\n", mtd->name); } -static void fixup_s29gl064n_sectors(struct mtd_info *mtd, void *param) +static void fixup_s29gl064n_sectors(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; @@ -321,7 +321,7 @@ static void fixup_s29gl064n_sectors(struct mtd_info *mtd, void *param) } } -static void fixup_s29gl032n_sectors(struct mtd_info *mtd, void *param) +static void fixup_s29gl032n_sectors(struct mtd_info *mtd) { struct map_info *map = mtd->priv; struct cfi_private *cfi = map->fldrv_priv; @@ -334,47 +334,47 @@ static void fixup_s29gl032n_sectors(struct mtd_info *mtd, void *param) /* Used to fix CFI-Tables of chips without Extended Query Tables */ static struct cfi_fixup cfi_nopri_fixup_table[] = { - { CFI_MFR_SST, 0x234A, fixup_sst39vf, NULL, }, /* SST39VF1602 */ - { CFI_MFR_SST, 0x234B, fixup_sst39vf, NULL, }, /* SST39VF1601 */ - { CFI_MFR_SST, 0x235A, fixup_sst39vf, NULL, }, /* SST39VF3202 */ - { CFI_MFR_SST, 0x235B, fixup_sst39vf, NULL, }, /* SST39VF3201 */ - { CFI_MFR_SST, 0x235C, fixup_sst39vf_rev_b, NULL, }, /* SST39VF3202B */ - { CFI_MFR_SST, 0x235D, fixup_sst39vf_rev_b, NULL, }, /* SST39VF3201B */ - { CFI_MFR_SST, 0x236C, fixup_sst39vf_rev_b, NULL, }, /* SST39VF6402B */ - { CFI_MFR_SST, 0x236D, fixup_sst39vf_rev_b, NULL, }, /* SST39VF6401B */ - { 0, 0, NULL, NULL } + { CFI_MFR_SST, 0x234a, fixup_sst39vf }, /* SST39VF1602 */ + { CFI_MFR_SST, 0x234b, fixup_sst39vf }, /* SST39VF1601 */ + { CFI_MFR_SST, 0x235a, fixup_sst39vf }, /* SST39VF3202 */ + { CFI_MFR_SST, 0x235b, fixup_sst39vf }, /* SST39VF3201 */ + { CFI_MFR_SST, 0x235c, fixup_sst39vf_rev_b }, /* SST39VF3202B */ + { CFI_MFR_SST, 0x235d, fixup_sst39vf_rev_b }, /* SST39VF3201B */ + { CFI_MFR_SST, 0x236c, fixup_sst39vf_rev_b }, /* SST39VF6402B */ + { CFI_MFR_SST, 0x236d, fixup_sst39vf_rev_b }, /* SST39VF6401B */ + { 0, 0, NULL } }; static struct cfi_fixup cfi_fixup_table[] = { - { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, + { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri }, #ifdef AMD_BOOTLOC_BUG - { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL }, - { CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_amd_bootblock, NULL }, + { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock }, + { CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_amd_bootblock }, #endif - { CFI_MFR_AMD, 0x0050, fixup_use_secsi, NULL, }, - { CFI_MFR_AMD, 0x0053, fixup_use_secsi, NULL, }, - { CFI_MFR_AMD, 0x0055, fixup_use_secsi, NULL, }, - { CFI_MFR_AMD, 0x0056, fixup_use_secsi, NULL, }, - { CFI_MFR_AMD, 0x005C, fixup_use_secsi, NULL, }, - { CFI_MFR_AMD, 0x005F, fixup_use_secsi, NULL, }, - { CFI_MFR_AMD, 0x0c01, fixup_s29gl064n_sectors, NULL, }, - { CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors, NULL, }, - { CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors, NULL, }, - { CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors, NULL, }, - { CFI_MFR_SST, 0x536A, fixup_sst38vf640x_sectorsize, NULL, }, /* SST38VF6402 */ - { CFI_MFR_SST, 0x536B, fixup_sst38vf640x_sectorsize, NULL, }, /* SST38VF6401 */ - { CFI_MFR_SST, 0x536C, fixup_sst38vf640x_sectorsize, NULL, }, /* SST38VF6404 */ - { CFI_MFR_SST, 0x536D, fixup_sst38vf640x_sectorsize, NULL, }, /* SST38VF6403 */ + { CFI_MFR_AMD, 0x0050, fixup_use_secsi }, + { CFI_MFR_AMD, 0x0053, fixup_use_secsi }, + { CFI_MFR_AMD, 0x0055, fixup_use_secsi }, + { CFI_MFR_AMD, 0x0056, fixup_use_secsi }, + { CFI_MFR_AMD, 0x005C, fixup_use_secsi }, + { CFI_MFR_AMD, 0x005F, fixup_use_secsi }, + { CFI_MFR_AMD, 0x0c01, fixup_s29gl064n_sectors }, + { CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors }, + { CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors }, + { CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors }, + { CFI_MFR_SST, 0x536a, fixup_sst38vf640x_sectorsize }, /* SST38VF6402 */ + { CFI_MFR_SST, 0x536b, fixup_sst38vf640x_sectorsize }, /* SST38VF6401 */ + { CFI_MFR_SST, 0x536c, fixup_sst38vf640x_sectorsize }, /* SST38VF6404 */ + { CFI_MFR_SST, 0x536d, fixup_sst38vf640x_sectorsize }, /* SST38VF6403 */ #if !FORCE_WORD_WRITE - { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, }, + { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers }, #endif - { 0, 0, NULL, NULL } + { 0, 0, NULL } }; static struct cfi_fixup jedec_fixup_table[] = { - { CFI_MFR_SST, SST49LF004B, fixup_use_fwh_lock, NULL, }, - { CFI_MFR_SST, SST49LF040B, fixup_use_fwh_lock, NULL, }, - { CFI_MFR_SST, SST49LF008A, fixup_use_fwh_lock, NULL, }, - { 0, 0, NULL, NULL } + { CFI_MFR_SST, SST49LF004B, fixup_use_fwh_lock }, + { CFI_MFR_SST, SST49LF040B, fixup_use_fwh_lock }, + { CFI_MFR_SST, SST49LF008A, fixup_use_fwh_lock }, + { 0, 0, NULL } }; static struct cfi_fixup fixup_table[] = { @@ -383,9 +383,9 @@ static struct cfi_fixup fixup_table[] = { * well. This table is to pick all cases where * we know that is the case. */ - { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL }, - { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL }, - { 0, 0, NULL, NULL } + { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip }, + { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock }, + { 0, 0, NULL } }; diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c index 360525c637d2..6ae3d111e1e7 100644 --- a/drivers/mtd/chips/cfi_util.c +++ b/drivers/mtd/chips/cfi_util.c @@ -156,7 +156,7 @@ void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup *fixups) for (f=fixups; f->fixup; f++) { if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi->mfr)) && ((f->id == CFI_ID_ANY) || (f->id == cfi->id))) { - f->fixup(mtd, f->param); + f->fixup(mtd); } } } diff --git a/drivers/mtd/chips/fwh_lock.h b/drivers/mtd/chips/fwh_lock.h index d18064977192..5e3cc80128aa 100644 --- a/drivers/mtd/chips/fwh_lock.h +++ b/drivers/mtd/chips/fwh_lock.h @@ -98,7 +98,7 @@ static int fwh_unlock_varsize(struct mtd_info *mtd, loff_t ofs, uint64_t len) return ret; } -static void fixup_use_fwh_lock(struct mtd_info *mtd, void *param) +static void fixup_use_fwh_lock(struct mtd_info *mtd) { printk(KERN_NOTICE "using fwh lock/unlock method\n"); /* Setup for the chips with the fwh lock method */ -- cgit v1.2.1 From 1534b8b09757190ce6e97fa97f9ad77c49082cd8 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 18 Nov 2010 15:02:21 -0800 Subject: mtd: fix nand kernel-doc warnings Warning(include/linux/mtd/nand.h:543): No description found for parameter 'badblockbits' Warning(drivers/mtd/nand/nand_bbt.c:1101): No description found for parameter 'mtd' Signed-off-by: Randy Dunlap Cc: David Woodhouse Cc: linux-mtd@lists.infradead.org Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_bbt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index 586b981f0e61..6ebd869993aa 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -1092,7 +1092,8 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td) /** * verify_bbt_descr - verify the bad block description - * @bd: the table to verify + * @mtd: MTD device structure + * @bd: the table to verify * * This functions performs a few sanity checks on the bad block description * table. -- cgit v1.2.1 From e14feafbe0d5c6d64bb6fe4eba928cb57ac9a4c8 Mon Sep 17 00:00:00 2001 From: Jason Liu Date: Fri, 19 Nov 2010 16:40:45 +0800 Subject: mtd: nand: add check for out of page read When run mtd_oobtest case, there will be one error for step(4), which turned out it need add one check for out of page read in nand_do_read_oob just like mtd_do_write_oob did it already. This commit also fix one typo error for comments in mtd_do_write_oob Signed-off-by: Jason Liu Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 1f75a1b1f7c3..75d199e4f25b 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1782,6 +1782,13 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, else len = mtd->oobsize; + /* Do not allow read past end of page */ + if ((ops->ooboffs + readlen) > len) { + DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to read " + "past end of page\n", __func__); + return -EINVAL; + } + if (unlikely(ops->ooboffs >= len)) { DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start read " "outside oob\n", __func__); @@ -2377,7 +2384,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, return -EINVAL; } - /* Do not allow reads past end of device */ + /* Do not allow write past end of device */ if (unlikely(to >= mtd->size || ops->ooboffs + ops->ooblen > ((mtd->size >> chip->page_shift) - -- cgit v1.2.1 From a7e93dcd9aacb3ef4acfcc4310577f3ae0741821 Mon Sep 17 00:00:00 2001 From: Roman Tereshonkov Date: Tue, 23 Nov 2010 14:17:17 +0200 Subject: mtd: fix master device identification for mtd repartition Function mtd_has_master renamed as mtd_is_partition to follow the function logic. The patch fixes the problem of checking the right mtd device for partition creation. To delete partition checking is not needed here so as it is done in mtd_del_partition. By master we consider the mtd device which does not belong to any partition. Signed-off-by: Roman Tereshonkov Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdchar.c | 8 ++++---- drivers/mtd/mtdpart.c | 10 +++++----- 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index cad8fcc7b239..16de17b5b829 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -522,10 +522,6 @@ static int mtd_blkpg_ioctl(struct mtd_info *mtd, if (!capable(CAP_SYS_ADMIN)) return -EPERM; - /* Only master mtd device must be used to control partitions */ - if (!mtd_is_master(mtd)) - return -EINVAL; - if (copy_from_user(&a, arg, sizeof(struct blkpg_ioctl_arg))) return -EFAULT; @@ -535,6 +531,10 @@ static int mtd_blkpg_ioctl(struct mtd_info *mtd, switch (a.op) { case BLKPG_ADD_PARTITION: + /* Only master mtd device must be used to add partitions */ + if (mtd_is_partition(mtd)) + return -EINVAL; + return mtd_add_partition(mtd, p.devname, p.start, p.length); case BLKPG_DEL_PARTITION: diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 79e3689f1e16..1047ff0a4f55 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -720,19 +720,19 @@ int parse_mtd_partitions(struct mtd_info *master, const char **types, } EXPORT_SYMBOL_GPL(parse_mtd_partitions); -int mtd_is_master(struct mtd_info *mtd) +int mtd_is_partition(struct mtd_info *mtd) { struct mtd_part *part; - int nopart = 0; + int ispart = 0; mutex_lock(&mtd_partitions_mutex); list_for_each_entry(part, &mtd_partitions, list) if (&part->mtd == mtd) { - nopart = 1; + ispart = 1; break; } mutex_unlock(&mtd_partitions_mutex); - return nopart; + return ispart; } -EXPORT_SYMBOL_GPL(mtd_is_master); +EXPORT_SYMBOL_GPL(mtd_is_partition); -- cgit v1.2.1 From eeda667a29698b9a4d16dce8979afc6f512f3c42 Mon Sep 17 00:00:00 2001 From: "Sergej.Stepanov@ids.de" Date: Tue, 23 Nov 2010 18:38:36 +0100 Subject: mtd: fsl_elbc_nand: fix jffs2 problem after NAND-flash image record in u-boot This patch should fix the following problem: 1. the jffs2-image update in the u-boot was ok 2. first restart and first mount of the NAND-flash-partition was also ok 3. before the restart of controller there are no any activity on NAND-flash except of the jffs2_gcd_mtdX-process ... 4. BUT after the second restart the NAND-flash-partition could not be really used after the second mount, dmesg filled with messages: ... jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x03ce0000: 0xc0ff instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x03d00000: 0xc0ff instead .... Just for for info: the behaviour observed on mpc8313-based board with the large-page NAND. The only activity on NAND-flash was the garbage collector process, that looks for CLEANMARKER-nodes As Scott said it was broken by commit 3ab8f2a2e7011c5e83363b42950757e46ef06824 Signed-off-by: Sergej Stepanov -- Signed-off-by: David Woodhouse --- drivers/mtd/nand/fsl_elbc_nand.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index c141b07b25d1..7a13d42cbabd 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -388,6 +388,8 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command, "page_addr: 0x%x, column: 0x%x.\n", page_addr, column); + elbc_fcm_ctrl->column = column; + elbc_fcm_ctrl->oob = 0; elbc_fcm_ctrl->use_mdr = 1; fcr = (NAND_CMD_STATUS << FCR_CMD1_SHIFT) | -- cgit v1.2.1 From 2ebf0622cdc5d2b51f22b68a0983d90df8a976c8 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 23 Nov 2010 17:02:13 -0200 Subject: mtd: mxc_nand: Fix warning on nr_parts unused variable If CONFIG_MTD_PARTITIONS is not selected, then the following warning is generated: CC drivers/mtd/nand/mxc_nand.o drivers/mtd/nand/mxc_nand.c: In function 'mxcnd_probe': drivers/mtd/nand/mxc_nand.c:1014: warning: unused variable 'nr_parts' Fix it by marking nr_parts as __maybe_unused. Signed-off-by: Fabio Estevam Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/mxc_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 214b03afdd48..ef932ba55a0b 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -1009,7 +1009,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) struct mxc_nand_platform_data *pdata = pdev->dev.platform_data; struct mxc_nand_host *host; struct resource *res; - int err = 0, nr_parts = 0; + int err = 0, __maybe_unused nr_parts = 0; struct nand_ecclayout *oob_smallpage, *oob_largepage; /* Allocate memory for MTD device structure and private data */ -- cgit v1.2.1 From 6b2995b62eba81df0f7d0b4be5b782be623c13eb Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 26 Nov 2010 14:31:44 -0200 Subject: mtd: fix section mismatch on sst25l MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Building the kernel with 'make CONFIG_DEBUG_SECTION_MISMATCH=y´ resulted in: WARNING: vmlinux.o(.data+0x15938): Section mismatch in reference from the variable sst25l_driver to the function .init.text:sst25l_probe() The variable sst25l_driver references the function __init sst25l_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fix the section mismatch. Signed-off-by: Fabio Estevam Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/sst25l.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c index 684247a8a5ed..c163e619abc9 100644 --- a/drivers/mtd/devices/sst25l.c +++ b/drivers/mtd/devices/sst25l.c @@ -335,7 +335,7 @@ out: return ret; } -static struct flash_info *__init sst25l_match_device(struct spi_device *spi) +static struct flash_info *__devinit sst25l_match_device(struct spi_device *spi) { struct flash_info *flash_info = NULL; struct spi_message m; @@ -375,7 +375,7 @@ static struct flash_info *__init sst25l_match_device(struct spi_device *spi) return flash_info; } -static int __init sst25l_probe(struct spi_device *spi) +static int __devinit sst25l_probe(struct spi_device *spi) { struct flash_info *flash_info; struct sst25l_flash *flash; -- cgit v1.2.1 From 4ad916bca7c372110815e77c2db95fb2eb2f8ab3 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 29 Nov 2010 13:52:06 +0100 Subject: mtd: FSMC NAND remove PARTITION macro and fix compile noise This removes the PARTITION macro that David didn't like and also removes a local variable that was dangling unused in some #ifdefs by being a bit more clever. Signed-off-by: Linus Walleij Signed-off-by: David Woodhouse --- drivers/mtd/nand/fsmc_nand.c | 66 ++++++++++++++++++++++++++++++++------------ 1 file changed, 48 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 02edfba25b0c..5af4b3c122f5 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -119,21 +119,36 @@ static struct fsmc_eccplace fsmc_ecc4_sp_place = { } }; -/* - * Default partition tables to be used if the partition information not - * provided through platform data - */ -#define PARTITION(n, off, sz) {.name = n, .offset = off, .size = sz} +#ifdef CONFIG_MTD_PARTITIONS /* + * Default partition tables to be used if the partition information not + * provided through platform data. + * * Default partition layout for small page(= 512 bytes) devices * Size for "Root file system" is updated in driver based on actual device size */ static struct mtd_partition partition_info_16KB_blk[] = { - PARTITION("X-loader", 0, 4 * 0x4000), - PARTITION("U-Boot", 0x10000, 20 * 0x4000), - PARTITION("Kernel", 0x60000, 256 * 0x4000), - PARTITION("Root File System", 0x460000, 0), + { + .name = "X-loader", + .offset = 0, + .size = 4*0x4000, + }, + { + .name = "U-Boot", + .offset = 0x10000, + .size = 20*0x4000, + }, + { + .name = "Kernel", + .offset = 0x60000, + .size = 256*0x4000, + }, + { + .name = "Root File System", + .offset = 0x460000, + .size = 0, + }, }; /* @@ -141,15 +156,32 @@ static struct mtd_partition partition_info_16KB_blk[] = { * Size for "Root file system" is updated in driver based on actual device size */ static struct mtd_partition partition_info_128KB_blk[] = { - PARTITION("X-loader", 0, 4 * 0x20000), - PARTITION("U-Boot", 0x80000, 12 * 0x20000), - PARTITION("Kernel", 0x200000, 48 * 0x20000), - PARTITION("Root File System", 0x800000, 0), + { + .name = "X-loader", + .offset = 0, + .size = 4*0x20000, + }, + { + .name = "U-Boot", + .offset = 0x80000, + .size = 12*0x20000, + }, + { + .name = "Kernel", + .offset = 0x200000, + .size = 48*0x20000, + }, + { + .name = "Root File System", + .offset = 0x800000, + .size = 0, + }, }; #ifdef CONFIG_MTD_CMDLINE_PARTS const char *part_probes[] = { "cmdlinepart", NULL }; #endif +#endif /** * struct fsmc_nand_data - atructure for FSMC NAND device state @@ -508,7 +540,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) struct nand_chip *nand; struct fsmc_regs *regs; struct resource *res; - int nr_parts, ret = 0; + int ret = 0; if (!pdata) { dev_err(&pdev->dev, "platform data is NULL\n"); @@ -676,11 +708,9 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) * Check if partition info passed via command line */ host->mtd.name = "nand"; - nr_parts = parse_mtd_partitions(&host->mtd, part_probes, + host->nr_partitions = parse_mtd_partitions(&host->mtd, part_probes, &host->partitions, 0); - if (nr_parts > 0) { - host->nr_partitions = nr_parts; - } else { + if (host->nr_partitions <= 0) { #endif /* * Check if partition info passed via command line -- cgit v1.2.1 From 593cd8711221c9661dbf9beb2fb42fecca03e693 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 29 Nov 2010 13:52:19 +0100 Subject: mtd: FSMC NAND use the PrimeCell identifier macros The FSMC actually has a standard ARM PrimeCell ID register, and the "revision" part of that register contains the thing that the code is looking at. Reuse the infrastructure from the AMBA bus abstraction and rid local defines. Signed-off-by: Linus Walleij Signed-off-by: David Woodhouse --- drivers/mtd/nand/fsmc_nand.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 5af4b3c122f5..205b10b9f9b9 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -31,6 +31,7 @@ #include #include #include +#include #include static struct nand_ecclayout fsmc_ecc1_layout = { @@ -184,8 +185,9 @@ const char *part_probes[] = { "cmdlinepart", NULL }; #endif /** - * struct fsmc_nand_data - atructure for FSMC NAND device state + * struct fsmc_nand_data - structure for FSMC NAND device state * + * @pid: Part ID on the AMBA PrimeCell format * @mtd: MTD info for a NAND flash. * @nand: Chip related info for a NAND flash. * @partitions: Partition info for a NAND Flash. @@ -201,6 +203,7 @@ const char *part_probes[] = { "cmdlinepart", NULL }; * @regs_va: FSMC regs base address. */ struct fsmc_nand_data { + u32 pid; struct mtd_info mtd; struct nand_chip nand; struct mtd_partition *partitions; @@ -541,6 +544,8 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) struct fsmc_regs *regs; struct resource *res; int ret = 0; + u32 pid; + int i; if (!pdata) { dev_err(&pdev->dev, "platform data is NULL\n"); @@ -630,6 +635,18 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) if (ret) goto err_probe1; + /* + * This device ID is actually a common AMBA ID as used on the + * AMBA PrimeCell bus. However it is not a PrimeCell. + */ + for (pid = 0, i = 0; i < 4; i++) + pid |= (readl(host->regs_va + resource_size(res) - 0x20 + 4 * i) & 255) << (i * 8); + host->pid = pid; + dev_info(&pdev->dev, "FSMC device partno %03x, manufacturer %02x, " + "revision %02x, config %02x\n", + AMBA_PART_BITS(pid), AMBA_MANF_BITS(pid), + AMBA_REV_BITS(pid), AMBA_CONFIG_BITS(pid)); + host->bank = pdata->bank; host->select_chip = pdata->select_bank; regs = host->regs_va; @@ -657,7 +674,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) fsmc_nand_setup(regs, host->bank, nand->options & NAND_BUSWIDTH_16); - if (get_fsmc_version(host->regs_va) == FSMC_VER8) { + if (AMBA_REV_BITS(host->pid) >= 8) { nand->ecc.read_page = fsmc_read_page_hwecc; nand->ecc.calculate = fsmc_read_hwecc_ecc4; nand->ecc.correct = fsmc_correct_data; @@ -677,7 +694,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) goto err_probe; } - if (get_fsmc_version(host->regs_va) == FSMC_VER8) { + if (AMBA_REV_BITS(host->pid) >= 8) { if (host->mtd.writesize == 512) { nand->ecc.layout = &fsmc_ecc4_sp_layout; host->ecc_place = &fsmc_ecc4_sp_place; -- cgit v1.2.1 From 8a8f632d8534d0c403831341450bd8db9e842f05 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Thu, 2 Dec 2010 09:24:16 +0900 Subject: mtd: OneNAND: Fix 4KiB pagesize OOB handling Original 4KiB pagesize chip (SLC) doesn't support OOB operations at Spec. And it's also same at Flex-OneNAND. Remove the MLC macro if possible and use 4KiB pagesize macro since MLC has 4KiB pagesize. Signed-off-by: Kyungmin Park Signed-off-by: David Woodhouse --- drivers/mtd/onenand/onenand_base.c | 29 ++++++++++++++++------------- 1 file changed, 16 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 4d6e6c54cc2c..c38bf9c54a11 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -400,8 +400,7 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le value = onenand_bufferram_address(this, block); this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); - if (ONENAND_IS_MLC(this) || ONENAND_IS_2PLANE(this) || - ONENAND_IS_4KB_PAGE(this)) + if (ONENAND_IS_2PLANE(this) || ONENAND_IS_4KB_PAGE(this)) /* It is always BufferRAM0 */ ONENAND_SET_BUFFERRAM0(this); else @@ -430,7 +429,7 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t le case FLEXONENAND_CMD_RECOVER_LSB: case ONENAND_CMD_READ: case ONENAND_CMD_READOOB: - if (ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this)) + if (ONENAND_IS_4KB_PAGE(this)) /* It is always BufferRAM0 */ dataram = ONENAND_SET_BUFFERRAM0(this); else @@ -1353,7 +1352,7 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from, stats = mtd->ecc_stats; - readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB; + readcmd = ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB; while (read < len) { cond_resched(); @@ -1429,7 +1428,7 @@ static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, int ret; onenand_get_device(mtd, FL_READING); - ret = ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this) ? + ret = ONENAND_IS_4KB_PAGE(this) ? onenand_mlc_read_ops_nolock(mtd, from, &ops) : onenand_read_ops_nolock(mtd, from, &ops); onenand_release_device(mtd); @@ -1464,7 +1463,7 @@ static int onenand_read_oob(struct mtd_info *mtd, loff_t from, onenand_get_device(mtd, FL_READING); if (ops->datbuf) - ret = ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this) ? + ret = ONENAND_IS_4KB_PAGE(this) ? onenand_mlc_read_ops_nolock(mtd, from, ops) : onenand_read_ops_nolock(mtd, from, ops); else @@ -1558,7 +1557,7 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from, column = from & (mtd->oobsize - 1); - readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB; + readcmd = ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB; while (read < len) { cond_resched(); @@ -1612,7 +1611,7 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to u_char *oob_buf = this->oob_buf; int status, i, readcmd; - readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB; + readcmd = ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB; this->command(mtd, readcmd, to, mtd->oobsize); onenand_update_bufferram(mtd, to, 0); @@ -2079,7 +2078,7 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to, oobbuf = this->oob_buf; - oobcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB; + oobcmd = ONENAND_IS_4KB_PAGE(this) ? ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB; /* Loop until all data write */ while (written < len) { @@ -2098,7 +2097,7 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to, memcpy(oobbuf + column, buf, thislen); this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize); - if (ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this)) { + if (ONENAND_IS_4KB_PAGE(this)) { /* Set main area of DataRAM to 0xff*/ memset(this->page_buf, 0xff, mtd->writesize); this->write_bufferram(mtd, ONENAND_DATARAM, @@ -3041,7 +3040,7 @@ static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len, this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0); this->wait(mtd, FL_OTPING); - ret = ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this) ? + ret = ONENAND_IS_4KB_PAGE(this) ? onenand_mlc_read_ops_nolock(mtd, from, &ops) : onenand_read_ops_nolock(mtd, from, &ops); @@ -3413,7 +3412,11 @@ static void onenand_check_features(struct mtd_info *mtd) break; } - if (ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this)) + /* The MLC has 4KiB pagesize. */ + if (ONENAND_IS_MLC(this)) + this->options |= ONENAND_HAS_4KB_PAGE; + + if (ONENAND_IS_4KB_PAGE(this)) this->options &= ~ONENAND_HAS_2PLANE; if (FLEXONENAND(this)) { @@ -3847,7 +3850,7 @@ static int onenand_probe(struct mtd_info *mtd) /* The data buffer size is equal to page size */ mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE); /* We use the full BufferRAM */ - if (ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this)) + if (ONENAND_IS_4KB_PAGE(this)) mtd->writesize <<= 1; mtd->oobsize = mtd->writesize >> 5; -- cgit v1.2.1 From 01039e4e63a8ea0d66fcfc71d7b99769bbbed9d6 Mon Sep 17 00:00:00 2001 From: Roman Tereshonkov Date: Thu, 2 Dec 2010 15:28:38 +0200 Subject: mtd: onenand: bugfix for 2x mode bad block handling This bug becomes visible in 2x mode when chip->writesize is different from mtd->writesize (= 2 * chip->writesize). At this case the bad block information is read from the first and the third physical pages instead of the first and the second as specification states. Signed-off-by: Roman Tereshonkov Acked-by: Kyungmin Park Signed-off-by: David Woodhouse --- drivers/mtd/onenand/onenand_bbt.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c index 01ab5b3c453b..905209bf9465 100644 --- a/drivers/mtd/onenand/onenand_bbt.c +++ b/drivers/mtd/onenand/onenand_bbt.c @@ -91,13 +91,15 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr for (j = 0; j < len; j++) { /* No need to read pages fully, * just read required OOB bytes */ - ret = onenand_bbt_read_oob(mtd, from + j * mtd->writesize + bd->offs, &ops); + ret = onenand_bbt_read_oob(mtd, + from + j * this->writesize + bd->offs, &ops); /* If it is a initial bad block, just ignore it */ if (ret == ONENAND_BBT_READ_FATAL_ERROR) return -EIO; - if (ret || check_short_pattern(&buf[j * scanlen], scanlen, mtd->writesize, bd)) { + if (ret || check_short_pattern(&buf[j * scanlen], + scanlen, this->writesize, bd)) { bbm->bbt[i >> 3] |= 0x03 << (i & 0x6); printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n", i >> 1, (unsigned int) from); -- cgit v1.2.1 From 4ccb3b4497ce01fab4933704fe21581e30fda1a5 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 3 Dec 2010 16:36:34 +0000 Subject: mtd: nand: Fix integer overflow in ONFI detection of chips >= 4GiB Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 75d199e4f25b..33550c43acc2 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2894,7 +2894,7 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, mtd->writesize = le32_to_cpu(p->byte_per_page); mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize; mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page); - chip->chipsize = le32_to_cpu(p->blocks_per_lun) * mtd->erasesize; + chip->chipsize = (uint64_t)le32_to_cpu(p->blocks_per_lun) * mtd->erasesize; busw = 0; if (le16_to_cpu(p->features) & 1) busw = NAND_BUSWIDTH_16; -- cgit v1.2.1 From e2c8e425baa01a4c8e6ae1b90194ed3d3cde0c66 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Thu, 11 Nov 2010 20:16:29 +0800 Subject: fsldma: add support to 36-bit physical address Expand the dma_mask of fsldma device to 36-bit, indicating that the DMA engine can deal with 36-bit physical address and does not need the SWIOTLB to create bounce buffer for it when doing dma_map_*(). Signed-off-by: Li Yang Acked-by: Kumar Gala Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 286c3ac6bdcc..531230b87976 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -1,7 +1,7 @@ /* * Freescale MPC85xx, MPC83xx DMA Engine support * - * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. + * Copyright (C) 2007-2010 Freescale Semiconductor, Inc. All rights reserved. * * Author: * Zhang Wei , Jul 2007 @@ -1322,6 +1322,8 @@ static int __devinit fsldma_of_probe(struct platform_device *op, fdev->common.device_control = fsl_dma_device_control; fdev->common.dev = &op->dev; + dma_set_mask(&(op->dev), DMA_BIT_MASK(36)); + dev_set_drvdata(&op->dev, fdev); /* -- cgit v1.2.1 From 0be035f3485379d812d617ee7eaa255cde97dbfa Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Thu, 2 Dec 2010 17:14:30 +0800 Subject: intel_mid_dma: add support for single item scatter-gather list Current driver's device_prep_slave_sg can't be used by DMAC2 even the sg list contains one item, this patch will enable DMAC2 to use this API. Signed-off-by: Feng Tang Acked-by: Vinod Koul Signed-off-by: Dan Williams --- drivers/dma/intel_mid_dma.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c index 41941d05bfb9..0c0feb8834d0 100644 --- a/drivers/dma/intel_mid_dma.c +++ b/drivers/dma/intel_mid_dma.c @@ -664,11 +664,20 @@ static struct dma_async_tx_descriptor *intel_mid_dma_prep_memcpy( /*calculate CTL_LO*/ ctl_lo.ctl_lo = 0; ctl_lo.ctlx.int_en = 1; - ctl_lo.ctlx.dst_tr_width = mids->dma_slave.dst_addr_width; - ctl_lo.ctlx.src_tr_width = mids->dma_slave.src_addr_width; ctl_lo.ctlx.dst_msize = mids->dma_slave.src_maxburst; ctl_lo.ctlx.src_msize = mids->dma_slave.dst_maxburst; + /* + * Here we need some translation from "enum dma_slave_buswidth" + * to the format for our dma controller + * standard intel_mid_dmac's format + * 1 Byte 0b000 + * 2 Bytes 0b001 + * 4 Bytes 0b010 + */ + ctl_lo.ctlx.dst_tr_width = mids->dma_slave.dst_addr_width / 2; + ctl_lo.ctlx.src_tr_width = mids->dma_slave.src_addr_width / 2; + if (mids->cfg_mode == LNW_DMA_MEM_TO_MEM) { ctl_lo.ctlx.tt_fc = 0; ctl_lo.ctlx.sinc = 0; @@ -746,8 +755,18 @@ static struct dma_async_tx_descriptor *intel_mid_dma_prep_slave_sg( BUG_ON(!mids); if (!midc->dma->pimr_mask) { - pr_debug("MDMA: SG list is not supported by this controller\n"); - return NULL; + /* We can still handle sg list with only one item */ + if (sg_len == 1) { + txd = intel_mid_dma_prep_memcpy(chan, + mids->dma_slave.dst_addr, + mids->dma_slave.src_addr, + sgl->length, + flags); + return txd; + } else { + pr_warn("MDMA: SG list is not supported by this controller\n"); + return NULL; + } } pr_debug("MDMA: SG Length = %d, direction = %d, Flags = %#lx\n", @@ -758,6 +777,7 @@ static struct dma_async_tx_descriptor *intel_mid_dma_prep_slave_sg( pr_err("MDMA: Prep memcpy failed\n"); return NULL; } + desc = to_intel_mid_dma_desc(txd); desc->dirn = direction; ctl_lo.ctl_lo = desc->ctl_lo; -- cgit v1.2.1 From f59c55d04b43bd72df8efa692dd07224fe94d1ac Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Tue, 7 Dec 2010 10:22:30 +0800 Subject: ACPI, APEI, Add APEI generic error status printing support In APEI, Hardware error information reported by firmware to Linux kernel is in the data structure of APEI generic error status (struct acpi_hes_generic_status). While now printk is used by Linux kernel to report hardware error information to user space. So, this patch adds printing support for the data structure, so that the corresponding hardware error information can be reported to user space via printk. PCIe AER information printing is not implemented yet. Will refactor the original PCIe AER information printing code to avoid code duplicating. The output format is as follow: := APEI generic hardware error status severity: , section: , severity: , flags:
fru_id: fru_text: section_type:
* := recoverable | fatal | corrected | info
# := [primary][, containment warning][, reset][, threshold exceeded]\ [, resource not accessible][, latent error]
:= generic processor error | memory error | \ PCIe error | unknown,
:= | | \ | := [processor_type: , ] [processor_isa: , ] [error_type: ] [operation: , ] [flags: ] [level: ] [version_info: ] [processor_id: ] [target_address: ] [requestor_id: ] [responder_id: ] [IP: ] * := IA32/X64 | IA64 * := IA32 | IA64 | X64 # := [cache error][, TLB error][, bus error][, micro-architectural error] * := unknown or generic | data read | data write | \ instruction execution # := [restartable][, precise IP][, overflow][, corrected] := [error_status: ] [physical_address: ] [physical_address_mask: ] [node: ] [card: ] [module: ] [bank: ] [device: ] [row: ] [column: ] [bit_position: ] [requestor_id: ] [responder_id: ] [target_id: ] [error_type: , ] * := unknown | no error | single-bit ECC | multi-bit ECC | \ single-symbol chipkill ECC | multi-symbol chipkill ECC | master abort | \ target abort | parity error | watchdog timeout | invalid address | \ mirror Broken | memory sparing | scrub corrected error | \ scrub uncorrected error := [port_type: , ] [version: .] [command: , status: ] [device_id: ::. slot: secondary_bus: vendor_id: , device_id: class_code: ] [serial number: , ] [bridge: secondary_status: , control: ] * := PCIe end point | legacy PCI end point | \ unknown | unknown | root port | upstream switch port | \ downstream switch port | PCIe to PCI/PCI-X bridge | \ PCI/PCI-X to PCIe bridge | root complex integrated endpoint device | \ root complex event collector Where, [] designate corresponding content is optional All description with * has the following format: field: , Where value of should be the position of "string" in description. Otherwise, will be "unknown". All description with # has the following format: field: Where each string in corresponding to one set bit of . The bit position is the position of "string" in description. For more detailed explanation of every field, please refer to UEFI specification version 2.3 or later, section Appendix N: Common Platform Error Record. Signed-off-by: Huang Ying Signed-off-by: Len Brown --- drivers/acpi/apei/apei-internal.h | 2 + drivers/acpi/apei/cper.c | 311 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 313 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/apei/apei-internal.h b/drivers/acpi/apei/apei-internal.h index 18df1e940276..ef0581f2094d 100644 --- a/drivers/acpi/apei/apei-internal.h +++ b/drivers/acpi/apei/apei-internal.h @@ -109,6 +109,8 @@ static inline u32 apei_estatus_len(struct acpi_hest_generic_status *estatus) return sizeof(*estatus) + estatus->data_length; } +void apei_estatus_print(const char *pfx, + const struct acpi_hest_generic_status *estatus); int apei_estatus_check_header(const struct acpi_hest_generic_status *estatus); int apei_estatus_check(const struct acpi_hest_generic_status *estatus); #endif diff --git a/drivers/acpi/apei/cper.c b/drivers/acpi/apei/cper.c index f4cf2fc4c8c1..31464a006d76 100644 --- a/drivers/acpi/apei/cper.c +++ b/drivers/acpi/apei/cper.c @@ -46,6 +46,317 @@ u64 cper_next_record_id(void) } EXPORT_SYMBOL_GPL(cper_next_record_id); +static const char *cper_severity_strs[] = { + "recoverable", + "fatal", + "corrected", + "info", +}; + +static const char *cper_severity_str(unsigned int severity) +{ + return severity < ARRAY_SIZE(cper_severity_strs) ? + cper_severity_strs[severity] : "unknown"; +} + +/* + * cper_print_bits - print strings for set bits + * @pfx: prefix for each line, including log level and prefix string + * @bits: bit mask + * @strs: string array, indexed by bit position + * @strs_size: size of the string array: @strs + * + * For each set bit in @bits, print the corresponding string in @strs. + * If the output length is longer than 80, multiple line will be + * printed, with @pfx is printed at the beginning of each line. + */ +static void cper_print_bits(const char *pfx, unsigned int bits, + const char *strs[], unsigned int strs_size) +{ + int i, len = 0; + const char *str; + char buf[84]; + + for (i = 0; i < strs_size; i++) { + if (!(bits & (1U << i))) + continue; + str = strs[i]; + if (len && len + strlen(str) + 2 > 80) { + printk("%s\n", buf); + len = 0; + } + if (!len) + len = snprintf(buf, sizeof(buf), "%s%s", pfx, str); + else + len += snprintf(buf+len, sizeof(buf)-len, ", %s", str); + } + if (len) + printk("%s\n", buf); +} + +static const char *cper_proc_type_strs[] = { + "IA32/X64", + "IA64", +}; + +static const char *cper_proc_isa_strs[] = { + "IA32", + "IA64", + "X64", +}; + +static const char *cper_proc_error_type_strs[] = { + "cache error", + "TLB error", + "bus error", + "micro-architectural error", +}; + +static const char *cper_proc_op_strs[] = { + "unknown or generic", + "data read", + "data write", + "instruction execution", +}; + +static const char *cper_proc_flag_strs[] = { + "restartable", + "precise IP", + "overflow", + "corrected", +}; + +static void cper_print_proc_generic(const char *pfx, + const struct cper_sec_proc_generic *proc) +{ + if (proc->validation_bits & CPER_PROC_VALID_TYPE) + printk("%s""processor_type: %d, %s\n", pfx, proc->proc_type, + proc->proc_type < ARRAY_SIZE(cper_proc_type_strs) ? + cper_proc_type_strs[proc->proc_type] : "unknown"); + if (proc->validation_bits & CPER_PROC_VALID_ISA) + printk("%s""processor_isa: %d, %s\n", pfx, proc->proc_isa, + proc->proc_isa < ARRAY_SIZE(cper_proc_isa_strs) ? + cper_proc_isa_strs[proc->proc_isa] : "unknown"); + if (proc->validation_bits & CPER_PROC_VALID_ERROR_TYPE) { + printk("%s""error_type: 0x%02x\n", pfx, proc->proc_error_type); + cper_print_bits(pfx, proc->proc_error_type, + cper_proc_error_type_strs, + ARRAY_SIZE(cper_proc_error_type_strs)); + } + if (proc->validation_bits & CPER_PROC_VALID_OPERATION) + printk("%s""operation: %d, %s\n", pfx, proc->operation, + proc->operation < ARRAY_SIZE(cper_proc_op_strs) ? + cper_proc_op_strs[proc->operation] : "unknown"); + if (proc->validation_bits & CPER_PROC_VALID_FLAGS) { + printk("%s""flags: 0x%02x\n", pfx, proc->flags); + cper_print_bits(pfx, proc->flags, cper_proc_flag_strs, + ARRAY_SIZE(cper_proc_flag_strs)); + } + if (proc->validation_bits & CPER_PROC_VALID_LEVEL) + printk("%s""level: %d\n", pfx, proc->level); + if (proc->validation_bits & CPER_PROC_VALID_VERSION) + printk("%s""version_info: 0x%016llx\n", pfx, proc->cpu_version); + if (proc->validation_bits & CPER_PROC_VALID_ID) + printk("%s""processor_id: 0x%016llx\n", pfx, proc->proc_id); + if (proc->validation_bits & CPER_PROC_VALID_TARGET_ADDRESS) + printk("%s""target_address: 0x%016llx\n", + pfx, proc->target_addr); + if (proc->validation_bits & CPER_PROC_VALID_REQUESTOR_ID) + printk("%s""requestor_id: 0x%016llx\n", + pfx, proc->requestor_id); + if (proc->validation_bits & CPER_PROC_VALID_RESPONDER_ID) + printk("%s""responder_id: 0x%016llx\n", + pfx, proc->responder_id); + if (proc->validation_bits & CPER_PROC_VALID_IP) + printk("%s""IP: 0x%016llx\n", pfx, proc->ip); +} + +static const char *cper_mem_err_type_strs[] = { + "unknown", + "no error", + "single-bit ECC", + "multi-bit ECC", + "single-symbol chipkill ECC", + "multi-symbol chipkill ECC", + "master abort", + "target abort", + "parity error", + "watchdog timeout", + "invalid address", + "mirror Broken", + "memory sparing", + "scrub corrected error", + "scrub uncorrected error", +}; + +static void cper_print_mem(const char *pfx, const struct cper_sec_mem_err *mem) +{ + if (mem->validation_bits & CPER_MEM_VALID_ERROR_STATUS) + printk("%s""error_status: 0x%016llx\n", pfx, mem->error_status); + if (mem->validation_bits & CPER_MEM_VALID_PHYSICAL_ADDRESS) + printk("%s""physical_address: 0x%016llx\n", + pfx, mem->physical_addr); + if (mem->validation_bits & CPER_MEM_VALID_PHYSICAL_ADDRESS_MASK) + printk("%s""physical_address_mask: 0x%016llx\n", + pfx, mem->physical_addr_mask); + if (mem->validation_bits & CPER_MEM_VALID_NODE) + printk("%s""node: %d\n", pfx, mem->node); + if (mem->validation_bits & CPER_MEM_VALID_CARD) + printk("%s""card: %d\n", pfx, mem->card); + if (mem->validation_bits & CPER_MEM_VALID_MODULE) + printk("%s""module: %d\n", pfx, mem->module); + if (mem->validation_bits & CPER_MEM_VALID_BANK) + printk("%s""bank: %d\n", pfx, mem->bank); + if (mem->validation_bits & CPER_MEM_VALID_DEVICE) + printk("%s""device: %d\n", pfx, mem->device); + if (mem->validation_bits & CPER_MEM_VALID_ROW) + printk("%s""row: %d\n", pfx, mem->row); + if (mem->validation_bits & CPER_MEM_VALID_COLUMN) + printk("%s""column: %d\n", pfx, mem->column); + if (mem->validation_bits & CPER_MEM_VALID_BIT_POSITION) + printk("%s""bit_position: %d\n", pfx, mem->bit_pos); + if (mem->validation_bits & CPER_MEM_VALID_REQUESTOR_ID) + printk("%s""requestor_id: 0x%016llx\n", pfx, mem->requestor_id); + if (mem->validation_bits & CPER_MEM_VALID_RESPONDER_ID) + printk("%s""responder_id: 0x%016llx\n", pfx, mem->responder_id); + if (mem->validation_bits & CPER_MEM_VALID_TARGET_ID) + printk("%s""target_id: 0x%016llx\n", pfx, mem->target_id); + if (mem->validation_bits & CPER_MEM_VALID_ERROR_TYPE) { + u8 etype = mem->error_type; + printk("%s""error_type: %d, %s\n", pfx, etype, + etype < ARRAY_SIZE(cper_mem_err_type_strs) ? + cper_mem_err_type_strs[etype] : "unknown"); + } +} + +static const char *cper_pcie_port_type_strs[] = { + "PCIe end point", + "legacy PCI end point", + "unknown", + "unknown", + "root port", + "upstream switch port", + "downstream switch port", + "PCIe to PCI/PCI-X bridge", + "PCI/PCI-X to PCIe bridge", + "root complex integrated endpoint device", + "root complex event collector", +}; + +static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie) +{ + if (pcie->validation_bits & CPER_PCIE_VALID_PORT_TYPE) + printk("%s""port_type: %d, %s\n", pfx, pcie->port_type, + pcie->port_type < ARRAY_SIZE(cper_pcie_port_type_strs) ? + cper_pcie_port_type_strs[pcie->port_type] : "unknown"); + if (pcie->validation_bits & CPER_PCIE_VALID_VERSION) + printk("%s""version: %d.%d\n", pfx, + pcie->version.major, pcie->version.minor); + if (pcie->validation_bits & CPER_PCIE_VALID_COMMAND_STATUS) + printk("%s""command: 0x%04x, status: 0x%04x\n", pfx, + pcie->command, pcie->status); + if (pcie->validation_bits & CPER_PCIE_VALID_DEVICE_ID) { + const __u8 *p; + printk("%s""device_id: %04x:%02x:%02x.%x\n", pfx, + pcie->device_id.segment, pcie->device_id.bus, + pcie->device_id.device, pcie->device_id.function); + printk("%s""slot: %d\n", pfx, + pcie->device_id.slot >> CPER_PCIE_SLOT_SHIFT); + printk("%s""secondary_bus: 0x%02x\n", pfx, + pcie->device_id.secondary_bus); + printk("%s""vendor_id: 0x%04x, device_id: 0x%04x\n", pfx, + pcie->device_id.vendor_id, pcie->device_id.device_id); + p = pcie->device_id.class_code; + printk("%s""class_code: %02x%02x%02x\n", pfx, p[0], p[1], p[2]); + } + if (pcie->validation_bits & CPER_PCIE_VALID_SERIAL_NUMBER) + printk("%s""serial number: 0x%04x, 0x%04x\n", pfx, + pcie->serial_number.lower, pcie->serial_number.upper); + if (pcie->validation_bits & CPER_PCIE_VALID_BRIDGE_CONTROL_STATUS) + printk( + "%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n", + pfx, pcie->bridge.secondary_status, pcie->bridge.control); +} + +static const char *apei_estatus_section_flag_strs[] = { + "primary", + "containment warning", + "reset", + "threshold exceeded", + "resource not accessible", + "latent error", +}; + +static void apei_estatus_print_section( + const char *pfx, const struct acpi_hest_generic_data *gdata, int sec_no) +{ + uuid_le *sec_type = (uuid_le *)gdata->section_type; + __u16 severity; + + severity = gdata->error_severity; + printk("%s""section: %d, severity: %d, %s\n", pfx, sec_no, severity, + cper_severity_str(severity)); + printk("%s""flags: 0x%02x\n", pfx, gdata->flags); + cper_print_bits(pfx, gdata->flags, apei_estatus_section_flag_strs, + ARRAY_SIZE(apei_estatus_section_flag_strs)); + if (gdata->validation_bits & CPER_SEC_VALID_FRU_ID) + printk("%s""fru_id: %pUl\n", pfx, (uuid_le *)gdata->fru_id); + if (gdata->validation_bits & CPER_SEC_VALID_FRU_TEXT) + printk("%s""fru_text: %.20s\n", pfx, gdata->fru_text); + + if (!uuid_le_cmp(*sec_type, CPER_SEC_PROC_GENERIC)) { + struct cper_sec_proc_generic *proc_err = (void *)(gdata + 1); + printk("%s""section_type: general processor error\n", pfx); + if (gdata->error_data_length >= sizeof(*proc_err)) + cper_print_proc_generic(pfx, proc_err); + else + goto err_section_too_small; + } else if (!uuid_le_cmp(*sec_type, CPER_SEC_PLATFORM_MEM)) { + struct cper_sec_mem_err *mem_err = (void *)(gdata + 1); + printk("%s""section_type: memory error\n", pfx); + if (gdata->error_data_length >= sizeof(*mem_err)) + cper_print_mem(pfx, mem_err); + else + goto err_section_too_small; + } else if (!uuid_le_cmp(*sec_type, CPER_SEC_PCIE)) { + struct cper_sec_pcie *pcie = (void *)(gdata + 1); + printk("%s""section_type: PCIe error\n", pfx); + if (gdata->error_data_length >= sizeof(*pcie)) + cper_print_pcie(pfx, pcie); + else + goto err_section_too_small; + } else + printk("%s""section type: unknown, %pUl\n", pfx, sec_type); + + return; + +err_section_too_small: + pr_err(FW_WARN "error section length is too small\n"); +} + +void apei_estatus_print(const char *pfx, + const struct acpi_hest_generic_status *estatus) +{ + struct acpi_hest_generic_data *gdata; + unsigned int data_len, gedata_len; + int sec_no = 0; + __u16 severity; + + printk("%s""APEI generic hardware error status\n", pfx); + severity = estatus->error_severity; + printk("%s""severity: %d, %s\n", pfx, severity, + cper_severity_str(severity)); + data_len = estatus->data_length; + gdata = (struct acpi_hest_generic_data *)(estatus + 1); + while (data_len > sizeof(*gdata)) { + gedata_len = gdata->error_data_length; + apei_estatus_print_section(pfx, gdata, sec_no); + data_len -= gedata_len + sizeof(*gdata); + sec_no++; + } +} +EXPORT_SYMBOL_GPL(apei_estatus_print); + int apei_estatus_check_header(const struct acpi_hest_generic_status *estatus) { if (estatus->data_length && -- cgit v1.2.1 From 32c361f574f85fa47600d84900598e2efc99082e Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Tue, 7 Dec 2010 10:22:31 +0800 Subject: ACPI, APEI, Report GHES error information via printk printk is one of the methods to report hardware errors to user space. This patch implements hardware error reporting for GHES via printk. Signed-off-by: Huang Ying Signed-off-by: Len Brown --- drivers/acpi/apei/ghes.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index 0d505e59214d..51905d07a4d9 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -43,6 +43,7 @@ #include #include #include +#include #include #include #include @@ -255,11 +256,26 @@ static void ghes_do_proc(struct ghes *ghes) } #endif } +} - if (!processed && printk_ratelimit()) - pr_warning(GHES_PFX - "Unknown error record from generic hardware error source: %d\n", - ghes->generic->header.source_id); +static void ghes_print_estatus(const char *pfx, struct ghes *ghes) +{ + /* Not more than 2 messages every 5 seconds */ + static DEFINE_RATELIMIT_STATE(ratelimit, 5*HZ, 2); + + if (pfx == NULL) { + if (ghes_severity(ghes->estatus->error_severity) <= + GHES_SEV_CORRECTED) + pfx = KERN_WARNING HW_ERR; + else + pfx = KERN_ERR HW_ERR; + } + if (__ratelimit(&ratelimit)) { + printk( + "%s""Hardware error from APEI Generic Hardware Error Source: %d\n", + pfx, ghes->generic->header.source_id); + apei_estatus_print(pfx, ghes->estatus); + } } static int ghes_proc(struct ghes *ghes) @@ -269,6 +285,7 @@ static int ghes_proc(struct ghes *ghes) rc = ghes_read_estatus(ghes, 0); if (rc) goto out; + ghes_print_estatus(NULL, ghes); ghes_do_proc(ghes); out: -- cgit v1.2.1 From cef6e8a3790d6bdc305496629c357a56001d59a6 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 6 Dec 2010 15:04:15 +0800 Subject: ACPI processor: remove processor throttling control procfs I/F Remove deprecated ACPI process procfs I/F for throttling control. This is because the t-state control should only be done in kernel, when system is in a overheating state. Now users can only change the processor t-state indirectly, by poking the cooling device sysfs I/F of the processor. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/Kconfig | 4 -- drivers/acpi/processor_driver.c | 75 +----------------------- drivers/acpi/processor_throttling.c | 114 ------------------------------------ 3 files changed, 1 insertion(+), 192 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 3f3489c5ca8c..5959077be0a4 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -53,10 +53,6 @@ config ACPI_PROCFS they have been replaced by functions in /sys. The deprecated files (and their replacements) include: - /proc/acpi/processor/*/throttling (/sys/class/thermal/ - cooling_device*/*) - /proc/acpi/video/*/brightness (/sys/class/backlight/) - /proc/acpi/thermal_zone/*/* (/sys/class/thermal/) This option has no effect on /proc/acpi/ files and functions which do not yet exist in /sys. diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 85e48047d7b0..29572debc65d 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -40,10 +40,6 @@ #include #include #include -#ifdef CONFIG_ACPI_PROCFS -#include -#include -#endif #include #include #include @@ -246,53 +242,6 @@ static int acpi_processor_errata(struct acpi_processor *pr) return result; } -#ifdef CONFIG_ACPI_PROCFS -static struct proc_dir_entry *acpi_processor_dir = NULL; - -static int __cpuinit acpi_processor_add_fs(struct acpi_device *device) -{ - struct proc_dir_entry *entry = NULL; - - - if (!acpi_device_dir(device)) { - acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device), - acpi_processor_dir); - if (!acpi_device_dir(device)) - return -ENODEV; - } - - /* 'throttling' [R/W] */ - entry = proc_create_data(ACPI_PROCESSOR_FILE_THROTTLING, - S_IFREG | S_IRUGO | S_IWUSR, - acpi_device_dir(device), - &acpi_processor_throttling_fops, - acpi_driver_data(device)); - if (!entry) - return -EIO; - return 0; -} -static int acpi_processor_remove_fs(struct acpi_device *device) -{ - - if (acpi_device_dir(device)) { - remove_proc_entry(ACPI_PROCESSOR_FILE_THROTTLING, - acpi_device_dir(device)); - remove_proc_entry(acpi_device_bid(device), acpi_processor_dir); - acpi_device_dir(device) = NULL; - } - - return 0; -} -#else -static inline int acpi_processor_add_fs(struct acpi_device *device) -{ - return 0; -} -static inline int acpi_processor_remove_fs(struct acpi_device *device) -{ - return 0; -} -#endif /* -------------------------------------------------------------------------- Driver Interface -------------------------------------------------------------------------- */ @@ -537,14 +486,10 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) per_cpu(processors, pr->id) = pr; - result = acpi_processor_add_fs(device); - if (result) - goto err_free_cpumask; - sysdev = get_cpu_sysdev(pr->id); if (sysfs_create_link(&device->dev.kobj, &sysdev->kobj, "sysdev")) { result = -EFAULT; - goto err_remove_fs; + goto err_free_cpumask; } #ifdef CONFIG_CPU_FREQ @@ -590,8 +535,6 @@ err_thermal_unregister: thermal_cooling_device_unregister(pr->cdev); err_power_exit: acpi_processor_power_exit(pr, device); -err_remove_fs: - acpi_processor_remove_fs(device); err_free_cpumask: free_cpumask_var(pr->throttling.shared_cpu_map); @@ -620,8 +563,6 @@ static int acpi_processor_remove(struct acpi_device *device, int type) sysfs_remove_link(&device->dev.kobj, "sysdev"); - acpi_processor_remove_fs(device); - if (pr->cdev) { sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); sysfs_remove_link(&pr->cdev->device.kobj, "device"); @@ -854,12 +795,6 @@ static int __init acpi_processor_init(void) memset(&errata, 0, sizeof(errata)); -#ifdef CONFIG_ACPI_PROCFS - acpi_processor_dir = proc_mkdir(ACPI_PROCESSOR_CLASS, acpi_root_dir); - if (!acpi_processor_dir) - return -ENOMEM; -#endif - if (!cpuidle_register_driver(&acpi_idle_driver)) { printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n", acpi_idle_driver.name); @@ -885,10 +820,6 @@ static int __init acpi_processor_init(void) out_cpuidle: cpuidle_unregister_driver(&acpi_idle_driver); -#ifdef CONFIG_ACPI_PROCFS - remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir); -#endif - return result; } @@ -907,10 +838,6 @@ static void __exit acpi_processor_exit(void) cpuidle_unregister_driver(&acpi_idle_driver); -#ifdef CONFIG_ACPI_PROCFS - remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir); -#endif - return; } diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index ff3632717c51..4a0eec5dd24a 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -32,10 +32,6 @@ #include #include #include -#ifdef CONFIG_ACPI_PROCFS -#include -#include -#endif #include #include @@ -1216,113 +1212,3 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) return result; } -#ifdef CONFIG_ACPI_PROCFS -/* proc interface */ -static int acpi_processor_throttling_seq_show(struct seq_file *seq, - void *offset) -{ - struct acpi_processor *pr = seq->private; - int i = 0; - int result = 0; - - if (!pr) - goto end; - - if (!(pr->throttling.state_count > 0)) { - seq_puts(seq, "\n"); - goto end; - } - - result = acpi_processor_get_throttling(pr); - - if (result) { - seq_puts(seq, - "Could not determine current throttling state.\n"); - goto end; - } - - seq_printf(seq, "state count: %d\n" - "active state: T%d\n" - "state available: T%d to T%d\n", - pr->throttling.state_count, pr->throttling.state, - pr->throttling_platform_limit, - pr->throttling.state_count - 1); - - seq_puts(seq, "states:\n"); - if (pr->throttling.acpi_processor_get_throttling == - acpi_processor_get_throttling_fadt) { - for (i = 0; i < pr->throttling.state_count; i++) - seq_printf(seq, " %cT%d: %02d%%\n", - (i == pr->throttling.state ? '*' : ' '), i, - (pr->throttling.states[i].performance ? pr-> - throttling.states[i].performance / 10 : 0)); - } else { - for (i = 0; i < pr->throttling.state_count; i++) - seq_printf(seq, " %cT%d: %02d%%\n", - (i == pr->throttling.state ? '*' : ' '), i, - (int)pr->throttling.states_tss[i]. - freqpercentage); - } - - end: - return 0; -} - -static int acpi_processor_throttling_open_fs(struct inode *inode, - struct file *file) -{ - return single_open(file, acpi_processor_throttling_seq_show, - PDE(inode)->data); -} - -static ssize_t acpi_processor_write_throttling(struct file *file, - const char __user * buffer, - size_t count, loff_t * data) -{ - int result = 0; - struct seq_file *m = file->private_data; - struct acpi_processor *pr = m->private; - char state_string[5] = ""; - char *charp = NULL; - size_t state_val = 0; - char tmpbuf[5] = ""; - - if (!pr || (count > sizeof(state_string) - 1)) - return -EINVAL; - - if (copy_from_user(state_string, buffer, count)) - return -EFAULT; - - state_string[count] = '\0'; - if ((count > 0) && (state_string[count-1] == '\n')) - state_string[count-1] = '\0'; - - charp = state_string; - if ((state_string[0] == 't') || (state_string[0] == 'T')) - charp++; - - state_val = simple_strtoul(charp, NULL, 0); - if (state_val >= pr->throttling.state_count) - return -EINVAL; - - snprintf(tmpbuf, 5, "%zu", state_val); - - if (strcmp(tmpbuf, charp) != 0) - return -EINVAL; - - result = acpi_processor_set_throttling(pr, state_val, false); - if (result) - return result; - - return count; -} - -const struct file_operations acpi_processor_throttling_fops = { - .owner = THIS_MODULE, - .open = acpi_processor_throttling_open_fs, - .read = seq_read, - .write = acpi_processor_write_throttling, - .llseek = seq_lseek, - .release = single_release, -}; -#endif -- cgit v1.2.1 From 677bd810eedce61edf15452491781ff046b92edc Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 6 Dec 2010 15:04:21 +0800 Subject: ACPI video: remove output switching control Remove the ACPI video output switching control as it never works. With the patch applied, ACPI video driver still catches the video output notification, but it does nothing but raises the notification to userspace. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 86 --------------------------------------------- drivers/acpi/video_detect.c | 57 +++--------------------------- drivers/gpu/drm/Kconfig | 1 - drivers/gpu/stub/Kconfig | 1 - 4 files changed, 4 insertions(+), 141 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 5cd0228d2daa..81766ebec843 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include #include @@ -172,9 +171,6 @@ struct acpi_video_device_cap { u8 _BQC:1; /* Get current brightness level */ u8 _BCQ:1; /* Some buggy BIOS uses _BCQ instead of _BQC */ u8 _DDC:1; /*Return the EDID for this device */ - u8 _DCS:1; /*Return status of output device */ - u8 _DGS:1; /*Query graphics state */ - u8 _DSS:1; /*Device state set */ }; struct acpi_video_brightness_flags { @@ -202,7 +198,6 @@ struct acpi_video_device { struct acpi_video_device_brightness *brightness; struct backlight_device *backlight; struct thermal_cooling_device *cooling_dev; - struct output_device *output_dev; }; static const char device_decode[][30] = { @@ -226,10 +221,6 @@ static int acpi_video_get_next_level(struct acpi_video_device *device, u32 level_current, u32 event); static int acpi_video_switch_brightness(struct acpi_video_device *device, int event); -static int acpi_video_device_get_state(struct acpi_video_device *device, - unsigned long long *state); -static int acpi_video_output_get(struct output_device *od); -static int acpi_video_device_set_state(struct acpi_video_device *device, int state); /*backlight device sysfs support*/ static int acpi_video_get_brightness(struct backlight_device *bd) @@ -265,30 +256,6 @@ static struct backlight_ops acpi_backlight_ops = { .update_status = acpi_video_set_brightness, }; -/*video output device sysfs support*/ -static int acpi_video_output_get(struct output_device *od) -{ - unsigned long long state; - struct acpi_video_device *vd = - (struct acpi_video_device *)dev_get_drvdata(&od->dev); - acpi_video_device_get_state(vd, &state); - return (int)state; -} - -static int acpi_video_output_set(struct output_device *od) -{ - unsigned long state = od->request_state; - struct acpi_video_device *vd= - (struct acpi_video_device *)dev_get_drvdata(&od->dev); - return acpi_video_device_set_state(vd, state); -} - -static struct output_properties acpi_output_properties = { - .set_state = acpi_video_output_set, - .get_status = acpi_video_output_get, -}; - - /* thermal cooling device callbacks */ static int video_get_max_state(struct thermal_cooling_device *cooling_dev, unsigned long *state) @@ -344,34 +311,6 @@ static struct thermal_cooling_device_ops video_cooling_ops = { Video Management -------------------------------------------------------------------------- */ -/* device */ - -static int -acpi_video_device_get_state(struct acpi_video_device *device, - unsigned long long *state) -{ - int status; - - status = acpi_evaluate_integer(device->dev->handle, "_DCS", NULL, state); - - return status; -} - -static int -acpi_video_device_set_state(struct acpi_video_device *device, int state) -{ - int status; - union acpi_object arg0 = { ACPI_TYPE_INTEGER }; - struct acpi_object_list args = { 1, &arg0 }; - unsigned long long ret; - - - arg0.integer.value = state; - status = acpi_evaluate_integer(device->dev->handle, "_DSS", &args, &ret); - - return status; -} - static int acpi_video_device_lcd_query_levels(struct acpi_video_device *device, union acpi_object **levels) @@ -831,15 +770,6 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DDC", &h_dummy1))) { device->cap._DDC = 1; } - if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DCS", &h_dummy1))) { - device->cap._DCS = 1; - } - if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DGS", &h_dummy1))) { - device->cap._DGS = 1; - } - if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DSS", &h_dummy1))) { - device->cap._DSS = 1; - } if (acpi_video_backlight_support()) { struct backlight_properties props; @@ -904,21 +834,6 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) printk(KERN_ERR PREFIX "Create sysfs link\n"); } - - if (acpi_video_display_switch_support()) { - - if (device->cap._DCS && device->cap._DSS) { - static int count; - char *name; - name = kasprintf(GFP_KERNEL, "acpi_video%d", count); - if (!name) - return; - count++; - device->output_dev = video_output_register(name, - NULL, device, &acpi_output_properties); - kfree(name); - } - } } /* @@ -1452,7 +1367,6 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device) thermal_cooling_device_unregister(device->cooling_dev); device->cooling_dev = NULL; } - video_output_unregister(device->output_dev); return 0; } diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index b83676126598..42d3d72dae85 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -17,15 +17,14 @@ * capabilities the graphics cards plugged in support. The check for general * video capabilities will be triggered by the first caller of * acpi_video_get_capabilities(NULL); which will happen when the first - * backlight (or display output) switching supporting driver calls: + * backlight switching supporting driver calls: * acpi_video_backlight_support(); * * Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B) * are available, video.ko should be used to handle the device. * * Otherwise vendor specific drivers like thinkpad_acpi, asus_acpi, - * sony_acpi,... can take care about backlight brightness and display output - * switching. + * sony_acpi,... can take care about backlight brightness. * * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m) * this file will not be compiled, acpi_video_get_capabilities() and @@ -83,11 +82,6 @@ long acpi_is_video_device(struct acpi_device *device) if (!device) return 0; - /* Is this device able to support video switching ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) || - ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy))) - video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING; - /* Is this device able to retrieve a video ROM ? */ if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy))) video_caps |= ACPI_VIDEO_ROM_AVAILABLE; @@ -161,8 +155,6 @@ long acpi_video_get_capabilities(acpi_handle graphics_handle) * * if (dmi_name_in_vendors("XY")) { * acpi_video_support |= - * ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR; - * acpi_video_support |= * ACPI_VIDEO_BACKLIGHT_DMI_VENDOR; *} */ @@ -212,33 +204,8 @@ int acpi_video_backlight_support(void) EXPORT_SYMBOL(acpi_video_backlight_support); /* - * Returns true if video.ko can do display output switching. - * This does not work well/at all with binary graphics drivers - * which disable system io ranges and do it on their own. - */ -int acpi_video_display_switch_support(void) -{ - if (!acpi_video_caps_checked) - acpi_video_get_capabilities(NULL); - - if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR) - return 0; - else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO) - return 1; - - if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR) - return 0; - else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO) - return 1; - - return acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING; -} -EXPORT_SYMBOL(acpi_video_display_switch_support); - -/* - * Use acpi_display_output=vendor/video or acpi_backlight=vendor/video - * To force that backlight or display output switching is processed by vendor - * specific acpi drivers or video.ko driver. + * Use acpi_backlight=vendor/video to force that backlight switching + * is processed by vendor specific acpi drivers or video.ko driver. */ static int __init acpi_backlight(char *str) { @@ -255,19 +222,3 @@ static int __init acpi_backlight(char *str) return 1; } __setup("acpi_backlight=", acpi_backlight); - -static int __init acpi_display_output(char *str) -{ - if (str == NULL || *str == '\0') - return 1; - else { - if (!strcmp("vendor", str)) - acpi_video_support |= - ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR; - if (!strcmp("video", str)) - acpi_video_support |= - ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO; - } - return 1; -} -__setup("acpi_display_output=", acpi_display_output); diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 7af443672626..64828a7db77b 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -107,7 +107,6 @@ config DRM_I915 select FB_CFB_IMAGEBLIT # i915 depends on ACPI_VIDEO when ACPI is enabled # but for select to work, need to select ACPI_VIDEO's dependencies, ick - select VIDEO_OUTPUT_CONTROL if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI select INPUT if ACPI select ACPI_VIDEO if ACPI diff --git a/drivers/gpu/stub/Kconfig b/drivers/gpu/stub/Kconfig index 0e1edd7311ff..09aea5f1556d 100644 --- a/drivers/gpu/stub/Kconfig +++ b/drivers/gpu/stub/Kconfig @@ -3,7 +3,6 @@ config STUB_POULSBO depends on PCI # Poulsbo stub depends on ACPI_VIDEO when ACPI is enabled # but for select to work, need to select ACPI_VIDEO's dependencies, ick - select VIDEO_OUTPUT_CONTROL if ACPI select BACKLIGHT_CLASS_DEVICE if ACPI select INPUT if ACPI select ACPI_VIDEO if ACPI -- cgit v1.2.1 From 82069552555cf951d9ade5c1aec61dd40b0765b5 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 6 Dec 2010 15:04:24 +0800 Subject: ACPI video: check cap._DDC flag before getting EDID cap._DDC is defined but never used. Check this flag now and don't try to get EDID for video output devices with this flag cleared. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 81766ebec843..177b4ddc3479 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1275,6 +1275,9 @@ int acpi_video_get_edid(struct acpi_device *device, int type, int device_id, if (!video_device) continue; + if (!video_device->cap._DDC) + continue; + if (type) { switch (type) { case ACPI_VIDEO_DISPLAY_CRT: -- cgit v1.2.1 From 99fd1895ef603f1a0fa9af478c96c637a7b4529d Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 6 Dec 2010 15:04:27 +0800 Subject: ACPI video: introduce module parameter video.use_bios_initial_backlight Introduce module parameter video.use_bios_initial_backlight. Some BIOSes claim they use the minimum backlight at boot, and this may bring dimming screen after boot. https://bugzilla.kernel.org/show_bug.cgi?id=21212 use video.use_bios_initl_backlight=0 to use the maximum backlight level after boot. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 5cd0228d2daa..89f19a8fc726 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -81,6 +81,13 @@ module_param(brightness_switch_enabled, bool, 0644); static int allow_duplicates; module_param(allow_duplicates, bool, 0644); +/* + * Some BIOSes claim they use minimum backlight at boot, + * and this may bring dimming screen after boot + */ +static int use_bios_initial_backlight = 1; +module_param(use_bios_initial_backlight, bool, 0644); + static int register_count = 0; static int acpi_video_bus_add(struct acpi_device *device); static int acpi_video_bus_remove(struct acpi_device *device, int type); @@ -766,9 +773,11 @@ acpi_video_init_brightness(struct acpi_video_device *device) * when invoked for the first time, i.e. level_old is invalid. * set the backlight to max_level in this case */ - for (i = 2; i < br->count; i++) - if (level_old == br->levels[i]) - level = level_old; + if (use_bios_initial_backlight) { + for (i = 2; i < br->count; i++) + if (level_old == br->levels[i]) + level = level_old; + } goto set_level; } -- cgit v1.2.1 From 16f4232ce4d6855361b4eb56262f4a202295c978 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 8 Dec 2010 10:10:16 +0800 Subject: IPMI: Add one interface to get more info of low-level IPMI device The IPMI smi_watcher will be used to catch the IPMI interface as they come or go. In order to communicate with the correct IPMI device, it should be confirmed whether it is what we wanted especially on the system with multiple IPMI devices. But the new_smi callback function of smi_watcher provides very limited info(only the interface number and dev pointer) and there is no detailed info about the low level interface. For example: which mechansim registers the IPMI interface(ACPI, PCI, DMI and so on). This is to add one interface that can get more info of low-level IPMI device. For example: the ACPI device handle will be returned for the pnp_acpi IPMI device. Signed-off-by: Zhao Yakui Signed-off-by: Corey Minyard Signed-off-by: Len Brown --- drivers/char/ipmi/ipmi_msghandler.c | 27 +++++++++++++++++++++++++++ drivers/char/ipmi/ipmi_si_intf.c | 20 ++++++++++++++++---- 2 files changed, 43 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 2fe72f8edf44..38223e93aa98 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -970,6 +970,33 @@ out_kfree: } EXPORT_SYMBOL(ipmi_create_user); +int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data) +{ + int rv = 0; + ipmi_smi_t intf; + struct ipmi_smi_handlers *handlers; + + mutex_lock(&ipmi_interfaces_mutex); + list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { + if (intf->intf_num == if_num) + goto found; + } + /* Not found, return an error */ + rv = -EINVAL; + mutex_unlock(&ipmi_interfaces_mutex); + return rv; + +found: + handlers = intf->handlers; + rv = -ENOSYS; + if (handlers->get_smi_info) + rv = handlers->get_smi_info(intf->send_info, data); + mutex_unlock(&ipmi_interfaces_mutex); + + return rv; +} +EXPORT_SYMBOL(ipmi_get_smi_info); + static void free_user(struct kref *ref) { ipmi_user_t user = container_of(ref, struct ipmi_user, refcount); diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 035da9e64a17..945ae4d5d21f 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -57,6 +57,7 @@ #include #include #include +#include #include #include #include "ipmi_si_sm.h" @@ -107,10 +108,6 @@ enum si_type { }; static char *si_to_str[] = { "kcs", "smic", "bt" }; -enum ipmi_addr_src { - SI_INVALID = 0, SI_HOTMOD, SI_HARDCODED, SI_SPMI, SI_ACPI, SI_SMBIOS, - SI_PCI, SI_DEVICETREE, SI_DEFAULT -}; static char *ipmi_addr_src_to_str[] = { NULL, "hotmod", "hardcoded", "SPMI", "ACPI", "SMBIOS", "PCI", "device-tree", "default" }; @@ -291,6 +288,7 @@ struct smi_info { struct task_struct *thread; struct list_head link; + union ipmi_smi_info_union addr_info; }; #define smi_inc_stat(smi, stat) \ @@ -1186,6 +1184,18 @@ static int smi_start_processing(void *send_info, return 0; } +static int get_smi_info(void *send_info, struct ipmi_smi_info *data) +{ + struct smi_info *smi = send_info; + + data->addr_src = smi->addr_source; + data->dev = smi->dev; + data->addr_info = smi->addr_info; + get_device(smi->dev); + + return 0; +} + static void set_maintenance_mode(void *send_info, int enable) { struct smi_info *smi_info = send_info; @@ -1197,6 +1207,7 @@ static void set_maintenance_mode(void *send_info, int enable) static struct ipmi_smi_handlers handlers = { .owner = THIS_MODULE, .start_processing = smi_start_processing, + .get_smi_info = get_smi_info, .sender = sender, .request_events = request_events, .set_maintenance_mode = set_maintenance_mode, @@ -2156,6 +2167,7 @@ static int __devinit ipmi_pnp_probe(struct pnp_dev *dev, printk(KERN_INFO PFX "probing via ACPI\n"); handle = acpi_dev->handle; + info->addr_info.acpi_info.acpi_handle = handle; /* _IFT tells us the interface type: KCS, BT, etc */ status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp); -- cgit v1.2.1 From e92b297cc72ade7a58eaec7e01c906d856f8ab6e Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 8 Dec 2010 10:10:18 +0800 Subject: IPMI/ACPI: Add the IPMI opregion driver to enable ACPI to access BMC controller ACPI 4.0 spec adds the ACPI IPMI opregion, which means that the ACPI AML code can also communicate with the BMC controller. This is to install the ACPI IPMI opregion and enable the ACPI to access the BMC controller through the IPMI message. It will create IPMI user interface for every IPMI device detected in ACPI namespace and install the corresponding IPMI opregion space handler. Then it can enable ACPI to access the BMC controller through the IPMI message. The following describes how to process the IPMI request in IPMI space handler: 1. format the IPMI message based on the request in AML code. IPMI system address. Now the address type is SYSTEM_INTERFACE_ADDR_TYPE IPMI net function & command IPMI message payload 2. send the IPMI message by using the function of ipmi_request_settime 3. wait for the completion of IPMI message. It can be done in different routes: One is in handled in IPMI user recv callback function. Another is handled in timeout function. 4. format the IPMI response and return it to ACPI AML code. At the same time it also addes the module dependency. The ACPI IPMI opregion will depend on the IPMI subsystem. Signed-off-by: Zhao Yakui cc: Bjorn Helgaas Signed-off-by: Corey Minyard Signed-off-by: Len Brown --- drivers/acpi/Kconfig | 11 + drivers/acpi/Makefile | 1 + drivers/acpi/acpi_ipmi.c | 525 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 537 insertions(+) create mode 100644 drivers/acpi/acpi_ipmi.c (limited to 'drivers') diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 3f3489c5ca8c..a0c03658b2ea 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -209,6 +209,17 @@ config ACPI_PROCESSOR To compile this driver as a module, choose M here: the module will be called processor. +config ACPI_IPMI + tristate "IPMI" + depends on EXPERIMENTAL && IPMI_SI && IPMI_HANDLER + default n + help + This driver enables the ACPI to access the BMC controller. And it + uses the IPMI request/response message to communicate with BMC + controller, which can be found on on the server. + + To compile this driver as a module, choose M here: + the module will be called as acpi_ipmi. config ACPI_HOTPLUG_CPU bool diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 3d031d02e54b..df4c4f030388 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -69,5 +69,6 @@ processor-y += processor_idle.o processor_thermal.o processor-$(CONFIG_CPU_FREQ) += processor_perflib.o obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o +obj-$(CONFIG_ACPI_IPMI) += acpi_ipmi.o obj-$(CONFIG_ACPI_APEI) += apei/ diff --git a/drivers/acpi/acpi_ipmi.c b/drivers/acpi/acpi_ipmi.c new file mode 100644 index 000000000000..f40acef80269 --- /dev/null +++ b/drivers/acpi/acpi_ipmi.c @@ -0,0 +1,525 @@ +/* + * acpi_ipmi.c - ACPI IPMI opregion + * + * Copyright (C) 2010 Intel Corporation + * Copyright (C) 2010 Zhao Yakui + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("Zhao Yakui"); +MODULE_DESCRIPTION("ACPI IPMI Opregion driver"); +MODULE_LICENSE("GPL"); + +#define IPMI_FLAGS_HANDLER_INSTALL 0 + +#define ACPI_IPMI_OK 0 +#define ACPI_IPMI_TIMEOUT 0x10 +#define ACPI_IPMI_UNKNOWN 0x07 +/* the IPMI timeout is 5s */ +#define IPMI_TIMEOUT (5 * HZ) + +struct acpi_ipmi_device { + /* the device list attached to driver_data.ipmi_devices */ + struct list_head head; + /* the IPMI request message list */ + struct list_head tx_msg_list; + struct mutex tx_msg_lock; + acpi_handle handle; + struct pnp_dev *pnp_dev; + ipmi_user_t user_interface; + int ipmi_ifnum; /* IPMI interface number */ + long curr_msgid; + unsigned long flags; + struct ipmi_smi_info smi_data; +}; + +struct ipmi_driver_data { + struct list_head ipmi_devices; + struct ipmi_smi_watcher bmc_events; + struct ipmi_user_hndl ipmi_hndlrs; + struct mutex ipmi_lock; +}; + +struct acpi_ipmi_msg { + struct list_head head; + /* + * General speaking the addr type should be SI_ADDR_TYPE. And + * the addr channel should be BMC. + * In fact it can also be IPMB type. But we will have to + * parse it from the Netfn command buffer. It is so complex + * that it is skipped. + */ + struct ipmi_addr addr; + long tx_msgid; + /* it is used to track whether the IPMI message is finished */ + struct completion tx_complete; + struct kernel_ipmi_msg tx_message; + int msg_done; + /* tx data . And copy it from ACPI object buffer */ + u8 tx_data[64]; + int tx_len; + u8 rx_data[64]; + int rx_len; + struct acpi_ipmi_device *device; +}; + +/* IPMI request/response buffer per ACPI 4.0, sec 5.5.2.4.3.2 */ +struct acpi_ipmi_buffer { + u8 status; + u8 length; + u8 data[64]; +}; + +static void ipmi_register_bmc(int iface, struct device *dev); +static void ipmi_bmc_gone(int iface); +static void ipmi_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data); +static void acpi_add_ipmi_device(struct acpi_ipmi_device *ipmi_device); +static void acpi_remove_ipmi_device(struct acpi_ipmi_device *ipmi_device); + +static struct ipmi_driver_data driver_data = { + .ipmi_devices = LIST_HEAD_INIT(driver_data.ipmi_devices), + .bmc_events = { + .owner = THIS_MODULE, + .new_smi = ipmi_register_bmc, + .smi_gone = ipmi_bmc_gone, + }, + .ipmi_hndlrs = { + .ipmi_recv_hndl = ipmi_msg_handler, + }, +}; + +static struct acpi_ipmi_msg *acpi_alloc_ipmi_msg(struct acpi_ipmi_device *ipmi) +{ + struct acpi_ipmi_msg *ipmi_msg; + struct pnp_dev *pnp_dev = ipmi->pnp_dev; + + ipmi_msg = kzalloc(sizeof(struct acpi_ipmi_msg), GFP_KERNEL); + if (!ipmi_msg) { + dev_warn(&pnp_dev->dev, "Can't allocate memory for ipmi_msg\n"); + return NULL; + } + init_completion(&ipmi_msg->tx_complete); + INIT_LIST_HEAD(&ipmi_msg->head); + ipmi_msg->device = ipmi; + return ipmi_msg; +} + +#define IPMI_OP_RGN_NETFN(offset) ((offset >> 8) & 0xff) +#define IPMI_OP_RGN_CMD(offset) (offset & 0xff) +static void acpi_format_ipmi_msg(struct acpi_ipmi_msg *tx_msg, + acpi_physical_address address, + acpi_integer *value) +{ + struct kernel_ipmi_msg *msg; + struct acpi_ipmi_buffer *buffer; + struct acpi_ipmi_device *device; + + msg = &tx_msg->tx_message; + /* + * IPMI network function and command are encoded in the address + * within the IPMI OpRegion; see ACPI 4.0, sec 5.5.2.4.3. + */ + msg->netfn = IPMI_OP_RGN_NETFN(address); + msg->cmd = IPMI_OP_RGN_CMD(address); + msg->data = tx_msg->tx_data; + /* + * value is the parameter passed by the IPMI opregion space handler. + * It points to the IPMI request message buffer + */ + buffer = (struct acpi_ipmi_buffer *)value; + /* copy the tx message data */ + msg->data_len = buffer->length; + memcpy(tx_msg->tx_data, buffer->data, msg->data_len); + /* + * now the default type is SYSTEM_INTERFACE and channel type is BMC. + * If the netfn is APP_REQUEST and the cmd is SEND_MESSAGE, + * the addr type should be changed to IPMB. Then we will have to parse + * the IPMI request message buffer to get the IPMB address. + * If so, please fix me. + */ + tx_msg->addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + tx_msg->addr.channel = IPMI_BMC_CHANNEL; + tx_msg->addr.data[0] = 0; + + /* Get the msgid */ + device = tx_msg->device; + mutex_lock(&device->tx_msg_lock); + device->curr_msgid++; + tx_msg->tx_msgid = device->curr_msgid; + mutex_unlock(&device->tx_msg_lock); +} + +static void acpi_format_ipmi_response(struct acpi_ipmi_msg *msg, + acpi_integer *value, int rem_time) +{ + struct acpi_ipmi_buffer *buffer; + + /* + * value is also used as output parameter. It represents the response + * IPMI message returned by IPMI command. + */ + buffer = (struct acpi_ipmi_buffer *)value; + if (!rem_time && !msg->msg_done) { + buffer->status = ACPI_IPMI_TIMEOUT; + return; + } + /* + * If the flag of msg_done is not set or the recv length is zero, it + * means that the IPMI command is not executed correctly. + * The status code will be ACPI_IPMI_UNKNOWN. + */ + if (!msg->msg_done || !msg->rx_len) { + buffer->status = ACPI_IPMI_UNKNOWN; + return; + } + /* + * If the IPMI response message is obtained correctly, the status code + * will be ACPI_IPMI_OK + */ + buffer->status = ACPI_IPMI_OK; + buffer->length = msg->rx_len; + memcpy(buffer->data, msg->rx_data, msg->rx_len); +} + +static void ipmi_flush_tx_msg(struct acpi_ipmi_device *ipmi) +{ + struct acpi_ipmi_msg *tx_msg, *temp; + int count = HZ / 10; + struct pnp_dev *pnp_dev = ipmi->pnp_dev; + + list_for_each_entry_safe(tx_msg, temp, &ipmi->tx_msg_list, head) { + /* wake up the sleep thread on the Tx msg */ + complete(&tx_msg->tx_complete); + } + + /* wait for about 100ms to flush the tx message list */ + while (count--) { + if (list_empty(&ipmi->tx_msg_list)) + break; + schedule_timeout(1); + } + if (!list_empty(&ipmi->tx_msg_list)) + dev_warn(&pnp_dev->dev, "tx msg list is not NULL\n"); +} + +static void ipmi_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data) +{ + struct acpi_ipmi_device *ipmi_device = user_msg_data; + int msg_found = 0; + struct acpi_ipmi_msg *tx_msg; + struct pnp_dev *pnp_dev = ipmi_device->pnp_dev; + + if (msg->user != ipmi_device->user_interface) { + dev_warn(&pnp_dev->dev, "Unexpected response is returned. " + "returned user %p, expected user %p\n", + msg->user, ipmi_device->user_interface); + ipmi_free_recv_msg(msg); + return; + } + mutex_lock(&ipmi_device->tx_msg_lock); + list_for_each_entry(tx_msg, &ipmi_device->tx_msg_list, head) { + if (msg->msgid == tx_msg->tx_msgid) { + msg_found = 1; + break; + } + } + + mutex_unlock(&ipmi_device->tx_msg_lock); + if (!msg_found) { + dev_warn(&pnp_dev->dev, "Unexpected response (msg id %ld) is " + "returned.\n", msg->msgid); + ipmi_free_recv_msg(msg); + return; + } + + if (msg->msg.data_len) { + /* copy the response data to Rx_data buffer */ + memcpy(tx_msg->rx_data, msg->msg_data, msg->msg.data_len); + tx_msg->rx_len = msg->msg.data_len; + tx_msg->msg_done = 1; + } + complete(&tx_msg->tx_complete); + ipmi_free_recv_msg(msg); +}; + +static void ipmi_register_bmc(int iface, struct device *dev) +{ + struct acpi_ipmi_device *ipmi_device, *temp; + struct pnp_dev *pnp_dev; + ipmi_user_t user; + int err; + struct ipmi_smi_info smi_data; + acpi_handle handle; + + err = ipmi_get_smi_info(iface, &smi_data); + + if (err) + return; + + if (smi_data.addr_src != SI_ACPI) { + put_device(smi_data.dev); + return; + } + + handle = smi_data.addr_info.acpi_info.acpi_handle; + + mutex_lock(&driver_data.ipmi_lock); + list_for_each_entry(temp, &driver_data.ipmi_devices, head) { + /* + * if the corresponding ACPI handle is already added + * to the device list, don't add it again. + */ + if (temp->handle == handle) + goto out; + } + + ipmi_device = kzalloc(sizeof(*ipmi_device), GFP_KERNEL); + + if (!ipmi_device) + goto out; + + pnp_dev = to_pnp_dev(smi_data.dev); + ipmi_device->handle = handle; + ipmi_device->pnp_dev = pnp_dev; + + err = ipmi_create_user(iface, &driver_data.ipmi_hndlrs, + ipmi_device, &user); + if (err) { + dev_warn(&pnp_dev->dev, "Can't create IPMI user interface\n"); + kfree(ipmi_device); + goto out; + } + acpi_add_ipmi_device(ipmi_device); + ipmi_device->user_interface = user; + ipmi_device->ipmi_ifnum = iface; + mutex_unlock(&driver_data.ipmi_lock); + memcpy(&ipmi_device->smi_data, &smi_data, sizeof(struct ipmi_smi_info)); + return; + +out: + mutex_unlock(&driver_data.ipmi_lock); + put_device(smi_data.dev); + return; +} + +static void ipmi_bmc_gone(int iface) +{ + struct acpi_ipmi_device *ipmi_device, *temp; + + mutex_lock(&driver_data.ipmi_lock); + list_for_each_entry_safe(ipmi_device, temp, + &driver_data.ipmi_devices, head) { + if (ipmi_device->ipmi_ifnum != iface) + continue; + + acpi_remove_ipmi_device(ipmi_device); + put_device(ipmi_device->smi_data.dev); + kfree(ipmi_device); + break; + } + mutex_unlock(&driver_data.ipmi_lock); +} +/* -------------------------------------------------------------------------- + * Address Space Management + * -------------------------------------------------------------------------- */ +/* + * This is the IPMI opregion space handler. + * @function: indicates the read/write. In fact as the IPMI message is driven + * by command, only write is meaningful. + * @address: This contains the netfn/command of IPMI request message. + * @bits : not used. + * @value : it is an in/out parameter. It points to the IPMI message buffer. + * Before the IPMI message is sent, it represents the actual request + * IPMI message. After the IPMI message is finished, it represents + * the response IPMI message returned by IPMI command. + * @handler_context: IPMI device context. + */ + +static acpi_status +acpi_ipmi_space_handler(u32 function, acpi_physical_address address, + u32 bits, acpi_integer *value, + void *handler_context, void *region_context) +{ + struct acpi_ipmi_msg *tx_msg; + struct acpi_ipmi_device *ipmi_device = handler_context; + int err, rem_time; + acpi_status status; + /* + * IPMI opregion message. + * IPMI message is firstly written to the BMC and system software + * can get the respsonse. So it is unmeaningful for the read access + * of IPMI opregion. + */ + if ((function & ACPI_IO_MASK) == ACPI_READ) + return AE_TYPE; + + if (!ipmi_device->user_interface) + return AE_NOT_EXIST; + + tx_msg = acpi_alloc_ipmi_msg(ipmi_device); + if (!tx_msg) + return AE_NO_MEMORY; + + acpi_format_ipmi_msg(tx_msg, address, value); + mutex_lock(&ipmi_device->tx_msg_lock); + list_add_tail(&tx_msg->head, &ipmi_device->tx_msg_list); + mutex_unlock(&ipmi_device->tx_msg_lock); + err = ipmi_request_settime(ipmi_device->user_interface, + &tx_msg->addr, + tx_msg->tx_msgid, + &tx_msg->tx_message, + NULL, 0, 0, 0); + if (err) { + status = AE_ERROR; + goto end_label; + } + rem_time = wait_for_completion_timeout(&tx_msg->tx_complete, + IPMI_TIMEOUT); + acpi_format_ipmi_response(tx_msg, value, rem_time); + status = AE_OK; + +end_label: + mutex_lock(&ipmi_device->tx_msg_lock); + list_del(&tx_msg->head); + mutex_unlock(&ipmi_device->tx_msg_lock); + kfree(tx_msg); + return status; +} + +static void ipmi_remove_space_handler(struct acpi_ipmi_device *ipmi) +{ + if (!test_bit(IPMI_FLAGS_HANDLER_INSTALL, &ipmi->flags)) + return; + + acpi_remove_address_space_handler(ipmi->handle, + ACPI_ADR_SPACE_IPMI, &acpi_ipmi_space_handler); + + clear_bit(IPMI_FLAGS_HANDLER_INSTALL, &ipmi->flags); +} + +static int ipmi_install_space_handler(struct acpi_ipmi_device *ipmi) +{ + acpi_status status; + + if (test_bit(IPMI_FLAGS_HANDLER_INSTALL, &ipmi->flags)) + return 0; + + status = acpi_install_address_space_handler(ipmi->handle, + ACPI_ADR_SPACE_IPMI, + &acpi_ipmi_space_handler, + NULL, ipmi); + if (ACPI_FAILURE(status)) { + struct pnp_dev *pnp_dev = ipmi->pnp_dev; + dev_warn(&pnp_dev->dev, "Can't register IPMI opregion space " + "handle\n"); + return -EINVAL; + } + set_bit(IPMI_FLAGS_HANDLER_INSTALL, &ipmi->flags); + return 0; +} + +static void acpi_add_ipmi_device(struct acpi_ipmi_device *ipmi_device) +{ + + INIT_LIST_HEAD(&ipmi_device->head); + + mutex_init(&ipmi_device->tx_msg_lock); + INIT_LIST_HEAD(&ipmi_device->tx_msg_list); + ipmi_install_space_handler(ipmi_device); + + list_add_tail(&ipmi_device->head, &driver_data.ipmi_devices); +} + +static void acpi_remove_ipmi_device(struct acpi_ipmi_device *ipmi_device) +{ + /* + * If the IPMI user interface is created, it should be + * destroyed. + */ + if (ipmi_device->user_interface) { + ipmi_destroy_user(ipmi_device->user_interface); + ipmi_device->user_interface = NULL; + } + /* flush the Tx_msg list */ + if (!list_empty(&ipmi_device->tx_msg_list)) + ipmi_flush_tx_msg(ipmi_device); + + list_del(&ipmi_device->head); + ipmi_remove_space_handler(ipmi_device); +} + +static int __init acpi_ipmi_init(void) +{ + int result = 0; + + if (acpi_disabled) + return result; + + mutex_init(&driver_data.ipmi_lock); + + result = ipmi_smi_watcher_register(&driver_data.bmc_events); + + return result; +} + +static void __exit acpi_ipmi_exit(void) +{ + struct acpi_ipmi_device *ipmi_device, *temp; + + if (acpi_disabled) + return; + + ipmi_smi_watcher_unregister(&driver_data.bmc_events); + + /* + * When one smi_watcher is unregistered, it is only deleted + * from the smi_watcher list. But the smi_gone callback function + * is not called. So explicitly uninstall the ACPI IPMI oregion + * handler and free it. + */ + mutex_lock(&driver_data.ipmi_lock); + list_for_each_entry_safe(ipmi_device, temp, + &driver_data.ipmi_devices, head) { + acpi_remove_ipmi_device(ipmi_device); + put_device(ipmi_device->smi_data.dev); + kfree(ipmi_device); + } + mutex_unlock(&driver_data.ipmi_lock); +} + +module_init(acpi_ipmi_init); +module_exit(acpi_ipmi_exit); -- cgit v1.2.1 From 6a5b3beff916a19e7672f8c0330b4f82ed367be2 Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Mon, 20 Dec 2010 14:56:09 -0800 Subject: xenbus: Fix memory leak on release Pending responses were leaked on close. Signed-off-by: Daniel De Graaf Signed-off-by: Jan Beulich Signed-off-by: Jeremy Fitzhardinge --- drivers/xen/xenfs/xenbus.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/xen/xenfs/xenbus.c b/drivers/xen/xenfs/xenbus.c index 55791dd1105f..8f6c7d4b3e4d 100644 --- a/drivers/xen/xenfs/xenbus.c +++ b/drivers/xen/xenfs/xenbus.c @@ -543,6 +543,7 @@ static int xenbus_file_release(struct inode *inode, struct file *filp) struct xenbus_file_priv *u = filp->private_data; struct xenbus_transaction_holder *trans, *tmp; struct watch_adapter *watch, *tmp_watch; + struct read_buffer *rb, *tmp_rb; /* * No need for locking here because there are no other users, @@ -561,6 +562,10 @@ static int xenbus_file_release(struct inode *inode, struct file *filp) free_watch_adapter(watch); } + list_for_each_entry_safe(rb, tmp_rb, &u->read_buffers, list) { + list_del(&rb->list); + kfree(rb); + } kfree(u); return 0; -- cgit v1.2.1 From 2e9ff5f5e4c6b034554f3539f29529265279102c Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 18 Nov 2010 23:08:37 +0100 Subject: gpio-charger: Check result of kzalloc Since kzalloc can return NULL we have to check its result. Signed-off-by: Lars-Peter Clausen Signed-off-by: Vasiliy Kulikov Signed-off-by: Dan Carpenter Signed-off-by: Anton Vorontsov --- drivers/power/gpio-charger.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/power/gpio-charger.c b/drivers/power/gpio-charger.c index fccbe99b619c..8458cafcd2b2 100644 --- a/drivers/power/gpio-charger.c +++ b/drivers/power/gpio-charger.c @@ -87,6 +87,10 @@ static int __devinit gpio_charger_probe(struct platform_device *pdev) } gpio_charger = kzalloc(sizeof(*gpio_charger), GFP_KERNEL); + if (!gpio_charger) { + dev_err(&pdev->dev, "Failed to alloc driver structure\n"); + return -ENOMEM; + } charger = &gpio_charger->charger; -- cgit v1.2.1 From 80577b8a478f3386d106464f2a2241b2d43571ce Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 18 Nov 2010 23:08:39 +0100 Subject: gpio-charger: Provide default name for the power_supply This patch sets a default name for the power_supply in case there was no name supplied through the platform_data. Signed-off-by: Lars-Peter Clausen Signed-off-by: Anton Vorontsov --- drivers/power/gpio-charger.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/power/gpio-charger.c b/drivers/power/gpio-charger.c index 8458cafcd2b2..43078e34428a 100644 --- a/drivers/power/gpio-charger.c +++ b/drivers/power/gpio-charger.c @@ -94,7 +94,7 @@ static int __devinit gpio_charger_probe(struct platform_device *pdev) charger = &gpio_charger->charger; - charger->name = pdata->name; + charger->name = pdata->name ? pdata->name : "gpio-charger"; charger->type = pdata->type; charger->properties = gpio_charger_properties; charger->num_properties = ARRAY_SIZE(gpio_charger_properties); -- cgit v1.2.1 From 26eb387265872b59566ddeed5e9bf142a6b9ff5b Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 18 Nov 2010 23:08:38 +0100 Subject: gpio-charger: Fix potential race between irq handler and probe/remove This patch fixes a potential race between the irq handler and the probe and remove functions. The irq should not be requested before the chargers power_supply has been registered and has to be freed before the power_supply is unregistered, otherwise it is possible that the irq fires while the power_supply is not initialized yet or has already been freed. While we are at it replace request_irq with request_any_context_irq. Signed-off-by: Lars-Peter Clausen Signed-off-by: Anton Vorontsov --- drivers/power/gpio-charger.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/power/gpio-charger.c b/drivers/power/gpio-charger.c index 43078e34428a..25b88ac1d44c 100644 --- a/drivers/power/gpio-charger.c +++ b/drivers/power/gpio-charger.c @@ -98,7 +98,7 @@ static int __devinit gpio_charger_probe(struct platform_device *pdev) charger->type = pdata->type; charger->properties = gpio_charger_properties; charger->num_properties = ARRAY_SIZE(gpio_charger_properties); - charger->get_property = gpio_charger_get_property; + charger->get_property = gpio_charger_get_property; charger->supplied_to = pdata->supplied_to; charger->num_supplicants = pdata->num_supplicants; @@ -113,9 +113,18 @@ static int __devinit gpio_charger_probe(struct platform_device *pdev) goto err_gpio_free; } + gpio_charger->pdata = pdata; + + ret = power_supply_register(&pdev->dev, charger); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to register power supply: %d\n", + ret); + goto err_gpio_free; + } + irq = gpio_to_irq(pdata->gpio); if (irq > 0) { - ret = request_irq(irq, gpio_charger_irq, + ret = request_any_context_irq(irq, gpio_charger_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), charger); if (ret) @@ -124,21 +133,10 @@ static int __devinit gpio_charger_probe(struct platform_device *pdev) gpio_charger->irq = irq; } - gpio_charger->pdata = pdata; - - ret = power_supply_register(&pdev->dev, charger); - if (ret < 0) { - dev_err(&pdev->dev, "Failed to register power supply: %d\n", ret); - goto err_irq_free; - } - platform_set_drvdata(pdev, gpio_charger); return 0; -err_irq_free: - if (gpio_charger->irq) - free_irq(gpio_charger->irq, charger); err_gpio_free: gpio_free(pdata->gpio); err_free: @@ -150,10 +148,11 @@ static int __devexit gpio_charger_remove(struct platform_device *pdev) { struct gpio_charger *gpio_charger = platform_get_drvdata(pdev); - power_supply_unregister(&gpio_charger->charger); - if (gpio_charger->irq) free_irq(gpio_charger->irq, &gpio_charger->charger); + + power_supply_unregister(&gpio_charger->charger); + gpio_free(gpio_charger->pdata->gpio); platform_set_drvdata(pdev, NULL); -- cgit v1.2.1 From 3a2dbd611b38cf9a026c0099a85701ad183d1949 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Fri, 19 Nov 2010 21:41:58 +0300 Subject: power_supply: Fix use after free and memory leak device_unregister() might free its argument. This leads to freed memory use in kfree(). Also use put_device() instead of kfree() as dev may be already used in another layer after call to device_add(). Signed-off-by: Vasiliy Kulikov Signed-off-by: Anton Vorontsov --- drivers/power/power_supply_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c index 91606bb55318..f06bad047d76 100644 --- a/drivers/power/power_supply_core.c +++ b/drivers/power/power_supply_core.c @@ -190,10 +190,10 @@ int power_supply_register(struct device *parent, struct power_supply *psy) goto success; create_triggers_failed: - device_unregister(psy->dev); + device_del(dev); kobject_set_name_failed: device_add_failed: - kfree(dev); + put_device(dev); success: return rc; } -- cgit v1.2.1 From bc51e7ff521f28a7f14dc2f25307ad9101d1305a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 11 Dec 2010 17:51:45 +0100 Subject: power_supply: Don't use flush_scheduled_work() flush_scheduled_work() is deprecated and scheduled to be removed. In battery drivers, the work can be canceled on probe failure and removal and should be flushed on suspend. Replace flush_scheduled_work() usages with direct cancels and flushes. Signed-off-by: Tejun Heo Signed-off-by: Anton Vorontsov --- drivers/power/collie_battery.c | 13 ++++++------- drivers/power/intel_mid_battery.c | 2 +- drivers/power/power_supply_core.c | 2 +- drivers/power/tosa_battery.c | 13 ++++++------- drivers/power/wm97xx_battery.c | 4 ++-- drivers/power/z2_battery.c | 6 ++++-- 6 files changed, 20 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/power/collie_battery.c b/drivers/power/collie_battery.c index 039f41ae217d..548d263b1ad0 100644 --- a/drivers/power/collie_battery.c +++ b/drivers/power/collie_battery.c @@ -295,7 +295,7 @@ static struct { static int collie_bat_suspend(struct ucb1x00_dev *dev, pm_message_t state) { /* flush all pending status updates */ - flush_scheduled_work(); + flush_work_sync(&bat_work); return 0; } @@ -362,7 +362,7 @@ err_psy_reg_bu: err_psy_reg_main: /* see comment in collie_bat_remove */ - flush_scheduled_work(); + cancel_work_sync(&bat_work); i--; err_gpio: @@ -382,12 +382,11 @@ static void __devexit collie_bat_remove(struct ucb1x00_dev *dev) power_supply_unregister(&collie_bat_main.psy); /* - * now flush all pending work. - * we won't get any more schedules, since all - * sources (isr and external_power_changed) - * are unregistered now. + * Now cancel the bat_work. We won't get any more schedules, + * since all sources (isr and external_power_changed) are + * unregistered now. */ - flush_scheduled_work(); + cancel_work_sync(&bat_work); for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--) gpio_free(gpios[i].gpio); diff --git a/drivers/power/intel_mid_battery.c b/drivers/power/intel_mid_battery.c index 2a10cd361181..236147c3a5c6 100644 --- a/drivers/power/intel_mid_battery.c +++ b/drivers/power/intel_mid_battery.c @@ -767,7 +767,7 @@ static int __devexit platform_pmic_battery_remove(struct platform_device *pdev) power_supply_unregister(&pbi->usb); power_supply_unregister(&pbi->batt); - flush_scheduled_work(); + cancel_work_sync(&pbi->handler); kfree(pbi); return 0; } diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c index f06bad047d76..970f7335d3a7 100644 --- a/drivers/power/power_supply_core.c +++ b/drivers/power/power_supply_core.c @@ -201,7 +201,7 @@ EXPORT_SYMBOL_GPL(power_supply_register); void power_supply_unregister(struct power_supply *psy) { - flush_scheduled_work(); + cancel_work_sync(&psy->changed_work); power_supply_remove_triggers(psy); device_unregister(psy->dev); } diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c index ee04936b2db5..53f0d3524fcd 100644 --- a/drivers/power/tosa_battery.c +++ b/drivers/power/tosa_battery.c @@ -332,7 +332,7 @@ static struct { static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state) { /* flush all pending status updates */ - flush_scheduled_work(); + flush_work_sync(&bat_work); return 0; } @@ -422,7 +422,7 @@ err_psy_reg_jacket: err_psy_reg_main: /* see comment in tosa_bat_remove */ - flush_scheduled_work(); + cancel_work_sync(&bat_work); i--; err_gpio: @@ -445,12 +445,11 @@ static int __devexit tosa_bat_remove(struct platform_device *dev) power_supply_unregister(&tosa_bat_main.psy); /* - * now flush all pending work. - * we won't get any more schedules, since all - * sources (isr and external_power_changed) - * are unregistered now. + * Now cancel the bat_work. We won't get any more schedules, + * since all sources (isr and external_power_changed) are + * unregistered now. */ - flush_scheduled_work(); + cancel_work_sync(&bat_work); for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--) gpio_free(gpios[i].gpio); diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c index 5071d85ec12d..156559e56fa5 100644 --- a/drivers/power/wm97xx_battery.c +++ b/drivers/power/wm97xx_battery.c @@ -147,7 +147,7 @@ static irqreturn_t wm97xx_chrg_irq(int irq, void *data) #ifdef CONFIG_PM static int wm97xx_bat_suspend(struct device *dev) { - flush_scheduled_work(); + flush_work_sync(&bat_work); return 0; } @@ -273,7 +273,7 @@ static int __devexit wm97xx_bat_remove(struct platform_device *dev) free_irq(gpio_to_irq(pdata->charge_gpio), dev); gpio_free(pdata->charge_gpio); } - flush_scheduled_work(); + cancel_work_sync(&bat_work); power_supply_unregister(&bat_ps); kfree(prop); return 0; diff --git a/drivers/power/z2_battery.c b/drivers/power/z2_battery.c index 85064a9f649e..e5ed52d71937 100644 --- a/drivers/power/z2_battery.c +++ b/drivers/power/z2_battery.c @@ -254,7 +254,7 @@ static int __devexit z2_batt_remove(struct i2c_client *client) struct z2_charger *charger = i2c_get_clientdata(client); struct z2_battery_info *info = charger->info; - flush_scheduled_work(); + cancel_work_sync(&charger->bat_work); power_supply_unregister(&charger->batt_ps); kfree(charger->batt_ps.properties); @@ -271,7 +271,9 @@ static int __devexit z2_batt_remove(struct i2c_client *client) #ifdef CONFIG_PM static int z2_batt_suspend(struct i2c_client *client, pm_message_t state) { - flush_scheduled_work(); + struct z2_charger *charger = i2c_get_clientdata(client); + + flush_work_sync(&charger->bat_work); return 0; } -- cgit v1.2.1 From c66ae9bb4dcaac78cc5e30d0ce7ff2bf3dcb48d9 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Mon, 13 Dec 2010 12:26:21 +0200 Subject: s3c_adc_battery: Add gpio_inverted field to pdata Add support for inverted gpio_charge_finished values. This change is necessary for H1940 support. Signed-off-by: Vasily Khoruzhick Signed-off-by: Anton Vorontsov --- drivers/power/s3c_adc_battery.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/power/s3c_adc_battery.c b/drivers/power/s3c_adc_battery.c index fe16b482e912..7bc5bfe55ce9 100644 --- a/drivers/power/s3c_adc_battery.c +++ b/drivers/power/s3c_adc_battery.c @@ -112,6 +112,13 @@ static int calc_full_volt(int volt_val, int cur_val, int impedance) return volt_val + cur_val * impedance / 1000; } +static int charge_finished(struct s3c_adc_bat *bat) +{ + return bat->pdata->gpio_inverted ? + !gpio_get_value(bat->pdata->gpio_charge_finished) : + gpio_get_value(bat->pdata->gpio_charge_finished); +} + static int s3c_adc_bat_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -140,7 +147,7 @@ static int s3c_adc_bat_get_property(struct power_supply *psy, if (bat->cable_plugged && ((bat->pdata->gpio_charge_finished < 0) || - !gpio_get_value(bat->pdata->gpio_charge_finished))) { + !charge_finished(bat))) { lut = bat->pdata->lut_acin; lut_size = bat->pdata->lut_acin_cnt; } @@ -236,8 +243,7 @@ static void s3c_adc_bat_work(struct work_struct *work) } } else { if ((bat->pdata->gpio_charge_finished >= 0) && is_plugged) { - is_charged = gpio_get_value( - main_bat.pdata->gpio_charge_finished); + is_charged = charge_finished(&main_bat); if (is_charged) { if (bat->pdata->disable_charger) bat->pdata->disable_charger(); -- cgit v1.2.1 From f3dcab70e192b0489ac05cc554e0b1cedae46d1a Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 22 Dec 2010 02:44:49 +0300 Subject: jz4740-battery: Should include linux/io.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During test-build (with disabled 'depends on') I found that jz4740-battery driver lacks linux/io.h, which makes build break like this (on x86): CC [M] drivers/power/isp1704_charger.o jz4740-battery.c: In function 'jz_battery_read_voltage': jz4740-battery.c:84: error: implicit declaration of function 'readw’ jz4740-battery.c: In function 'jz_battery_probe': jz4740-battery.c:284: error: implicit declaration of function 'ioremap_nocache’ jz4740-battery.c:285: warning: assignment makes pointer from integer without a cast jz4740-battery.c:372: error: implicit declaration of function 'iounmap' make[2]: *** [drivers/power/jz4740-battery.o] Error 1 This patch fixes the issues, and thus makes it easier to build-test the driver for me. Signed-off-by: Anton Vorontsov --- drivers/power/jz4740-battery.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/power/jz4740-battery.c b/drivers/power/jz4740-battery.c index 5b4821593201..02414db6a94c 100644 --- a/drivers/power/jz4740-battery.c +++ b/drivers/power/jz4740-battery.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include -- cgit v1.2.1 From 00aaaef9a51a1a25c5d6d52ce510772f149a0eb0 Mon Sep 17 00:00:00 2001 From: Sheng Yang Date: Thu, 11 Nov 2010 15:46:54 +0800 Subject: PCI: MSI: Move MSI-X entry definition to pci_regs.h Then it can be used by others. Reviewed-by: Hidetoshi Seto Reviewed-by: Matthew Wilcox Signed-off-by: Sheng Yang Signed-off-by: Jesse Barnes --- drivers/pci/msi.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h index feff3bee6fe5..65c42f80f23e 100644 --- a/drivers/pci/msi.h +++ b/drivers/pci/msi.h @@ -6,12 +6,6 @@ #ifndef MSI_H #define MSI_H -#define PCI_MSIX_ENTRY_SIZE 16 -#define PCI_MSIX_ENTRY_LOWER_ADDR 0 -#define PCI_MSIX_ENTRY_UPPER_ADDR 4 -#define PCI_MSIX_ENTRY_DATA 8 -#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 - #define msi_control_reg(base) (base + PCI_MSI_FLAGS) #define msi_lower_address_reg(base) (base + PCI_MSI_ADDRESS_LO) #define msi_upper_address_reg(base) (base + PCI_MSI_ADDRESS_HI) -- cgit v1.2.1 From 8d805286968811223cca002134ba3d81244d5313 Mon Sep 17 00:00:00 2001 From: Sheng Yang Date: Thu, 11 Nov 2010 15:46:55 +0800 Subject: PCI: Add mask bit definition for MSI-X table Then we can use it instead of magic number 1. Reviewed-by: Hidetoshi Seto Cc: Matthew Wilcox Signed-off-by: Sheng Yang Signed-off-by: Jesse Barnes --- drivers/pci/msi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 7c24dcef2989..44b0aeee83e5 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -168,8 +168,9 @@ static u32 __msix_mask_irq(struct msi_desc *desc, u32 flag) u32 mask_bits = desc->masked; unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE + PCI_MSIX_ENTRY_VECTOR_CTRL; - mask_bits &= ~1; - mask_bits |= flag; + mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT; + if (flag) + mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT; writel(mask_bits, desc->mask_base + offset); return mask_bits; -- cgit v1.2.1 From 2f671e2dbff6eb5ef4e2600adbec550c13b8fe72 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Mon, 6 Dec 2010 14:00:56 -0500 Subject: PCI: Disable ASPM if BIOS asks us to We currently refuse to touch the ASPM registers if the BIOS tells us that ASPM isn't supported. This can cause problems if the BIOS has (for any reason) enabled ASPM on some devices anyway. Change the code such that we explicitly clear ASPM if the FADT indicates that ASPM isn't supported, and make sure we tidy up appropriately on device removal in order to deal with the hotplug case. If ASPM is disabled because the BIOS doesn't hand over control then we won't touch the registers. Signed-off-by: Matthew Garrett Signed-off-by: Jesse Barnes --- drivers/pci/pci-acpi.c | 1 + drivers/pci/pcie/aspm.c | 21 +++++++++++++++++---- 2 files changed, 18 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 24e19c594e57..d7ea699b8ddc 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -399,6 +399,7 @@ static int __init acpi_pci_init(void) if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) { printk(KERN_INFO"ACPI FADT declares the system doesn't support PCIe ASPM, so disable it\n"); + pcie_clear_aspm(); pcie_no_aspm(); } diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 71222814c1ec..3188cd96b338 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -68,7 +68,7 @@ struct pcie_link_state { struct aspm_latency acceptable[8]; }; -static int aspm_disabled, aspm_force; +static int aspm_disabled, aspm_force, aspm_clear_state; static DEFINE_MUTEX(aspm_lock); static LIST_HEAD(link_list); @@ -139,7 +139,7 @@ static void pcie_set_clkpm(struct pcie_link_state *link, int enable) { /* Don't enable Clock PM if the link is not Clock PM capable */ if (!link->clkpm_capable && enable) - return; + enable = 0; /* Need nothing if the specified equals to current state */ if (link->clkpm_enabled == enable) return; @@ -498,6 +498,10 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) struct pci_dev *child; int pos; u32 reg32; + + if (aspm_clear_state) + return -EINVAL; + /* * Some functions in a slot might not all be PCIe functions, * very strange. Disable ASPM for the whole slot @@ -563,12 +567,15 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev) struct pcie_link_state *link; int blacklist = !!pcie_aspm_sanity_check(pdev); - if (aspm_disabled || !pci_is_pcie(pdev) || pdev->link_state) + if (!pci_is_pcie(pdev) || pdev->link_state) return; if (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT && pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) return; + if (aspm_disabled && !aspm_clear_state) + return; + /* VIA has a strange chipset, root port is under a bridge */ if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT && pdev->bus->self) @@ -641,7 +648,7 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev) struct pci_dev *parent = pdev->bus->self; struct pcie_link_state *link, *root, *parent_link; - if (aspm_disabled || !pci_is_pcie(pdev) || + if ((aspm_disabled && !aspm_clear_state) || !pci_is_pcie(pdev) || !parent || !parent->link_state) return; if ((parent->pcie_type != PCI_EXP_TYPE_ROOT_PORT) && @@ -899,6 +906,12 @@ static int __init pcie_aspm_disable(char *str) __setup("pcie_aspm=", pcie_aspm_disable); +void pcie_clear_aspm(void) +{ + if (!aspm_force) + aspm_clear_state = 1; +} + void pcie_no_aspm(void) { if (!aspm_force) -- cgit v1.2.1 From 1d3c16a818e992c199844954d95c17fd7ce6cbba Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Tue, 30 Nov 2010 17:43:26 -0600 Subject: PCI: make pci_restore_state return void pci_restore_state only ever returns 0, thus there is no benefit in having it return any value. Also, a large majority of the callers do not check the return code of pci_restore_state. Make the pci_restore_state a void return and avoid the overhead. Acked-by: Mauro Carvalho Chehab Signed-off-by: Jon Mason Signed-off-by: Jesse Barnes --- drivers/media/video/cafe_ccic.c | 4 +--- drivers/net/myri10ge/myri10ge.c | 4 +--- drivers/net/sfc/falcon.c | 25 +++++-------------------- drivers/net/skge.c | 4 +--- drivers/net/sky2.c | 5 +---- drivers/net/wireless/rt2x00/rt2x00pci.c | 4 ++-- drivers/pci/pci-driver.c | 3 ++- drivers/pci/pci.c | 7 ++----- drivers/scsi/ipr.c | 8 +------- drivers/scsi/pmcraid.c | 7 +------ drivers/staging/sm7xx/smtcfb.c | 2 +- 11 files changed, 18 insertions(+), 55 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 0dfff50891e4..737bb877e962 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -2186,9 +2186,7 @@ static int cafe_pci_resume(struct pci_dev *pdev) struct cafe_camera *cam = to_cam(v4l2_dev); int ret = 0; - ret = pci_restore_state(pdev); - if (ret) - return ret; + pci_restore_state(pdev); ret = pci_enable_device(pdev); if (ret) { diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 8524cc40ec57..d3c4a374a92e 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -3403,9 +3403,7 @@ static int myri10ge_resume(struct pci_dev *pdev) return -EIO; } - status = pci_restore_state(pdev); - if (status) - return status; + pci_restore_state(pdev); status = pci_enable_device(pdev); if (status) { diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 267019bb2b15..1763b9a7fd8e 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -1066,22 +1066,9 @@ static int falcon_reset_hw(struct efx_nic *efx, enum reset_type method) /* Restore PCI configuration if needed */ if (method == RESET_TYPE_WORLD) { - if (efx_nic_is_dual_func(efx)) { - rc = pci_restore_state(nic_data->pci_dev2); - if (rc) { - netif_err(efx, drv, efx->net_dev, - "failed to restore PCI config for " - "the secondary function\n"); - goto fail3; - } - } - rc = pci_restore_state(efx->pci_dev); - if (rc) { - netif_err(efx, drv, efx->net_dev, - "failed to restore PCI config for the " - "primary function\n"); - goto fail4; - } + if (efx_nic_is_dual_func(efx)) + pci_restore_state(nic_data->pci_dev2); + pci_restore_state(efx->pci_dev); netif_dbg(efx, drv, efx->net_dev, "successfully restored PCI config\n"); } @@ -1092,7 +1079,7 @@ static int falcon_reset_hw(struct efx_nic *efx, enum reset_type method) rc = -ETIMEDOUT; netif_err(efx, hw, efx->net_dev, "timed out waiting for hardware reset\n"); - goto fail5; + goto fail3; } netif_dbg(efx, hw, efx->net_dev, "hardware reset complete\n"); @@ -1100,11 +1087,9 @@ static int falcon_reset_hw(struct efx_nic *efx, enum reset_type method) /* pci_save_state() and pci_restore_state() MUST be called in pairs */ fail2: -fail3: pci_restore_state(efx->pci_dev); fail1: -fail4: -fail5: +fail3: return rc; } diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 220e0398f1d5..61553af38e65 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -4087,9 +4087,7 @@ static int skge_resume(struct pci_dev *pdev) if (err) goto out; - err = pci_restore_state(pdev); - if (err) - goto out; + pci_restore_state(pdev); err = skge_reset(hw); if (err) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index d6577084ce70..be3aee782760 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4969,10 +4969,7 @@ static int sky2_resume(struct pci_dev *pdev) if (err) goto out; - err = pci_restore_state(pdev); - if (err) - goto out; - + pci_restore_state(pdev); pci_enable_wake(pdev, PCI_D0, 0); /* Re-enable all clocks */ diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 2449d785cf8d..4fd4c33de6ae 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -356,12 +356,12 @@ int rt2x00pci_resume(struct pci_dev *pci_dev) struct rt2x00_dev *rt2x00dev = hw->priv; if (pci_set_power_state(pci_dev, PCI_D0) || - pci_enable_device(pci_dev) || - pci_restore_state(pci_dev)) { + pci_enable_device(pci_dev)) { ERROR(rt2x00dev, "Failed to resume device.\n"); return -EIO; } + pci_restore_state(pci_dev); return rt2x00lib_resume(rt2x00dev); } EXPORT_SYMBOL_GPL(rt2x00pci_resume); diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 8a6f797de8e5..80e551ee640b 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -449,7 +449,8 @@ static int pci_restore_standard_config(struct pci_dev *pci_dev) return error; } - return pci_restore_state(pci_dev); + pci_restore_state(pci_dev); + return 0; } static void pci_pm_default_resume_early(struct pci_dev *pci_dev) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 710c8a29be0d..6762dcae90ab 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -937,14 +937,13 @@ pci_save_state(struct pci_dev *dev) * pci_restore_state - Restore the saved state of a PCI device * @dev: - PCI device that we're dealing with */ -int -pci_restore_state(struct pci_dev *dev) +void pci_restore_state(struct pci_dev *dev) { int i; u32 val; if (!dev->state_saved) - return 0; + return; /* PCI Express register must be restored first */ pci_restore_pcie_state(dev); @@ -968,8 +967,6 @@ pci_restore_state(struct pci_dev *dev) pci_restore_iov_state(dev); dev->state_saved = false; - - return 0; } static int do_pci_enable_device(struct pci_dev *dev, int bars) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 5bbaee597e88..524d586c3147 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -7487,16 +7487,10 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd) { struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; volatile u32 int_reg; - int rc; ENTER; ioa_cfg->pdev->state_saved = true; - rc = pci_restore_state(ioa_cfg->pdev); - - if (rc != PCIBIOS_SUCCESSFUL) { - ipr_cmd->s.ioasa.hdr.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR); - return IPR_RC_JOB_CONTINUE; - } + pci_restore_state(ioa_cfg->pdev); if (ipr_set_pcix_cmd_reg(ioa_cfg)) { ipr_cmd->s.ioasa.hdr.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR); diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index 300d59f389da..321cf3ae8630 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -2228,12 +2228,7 @@ static void pmcraid_ioa_reset(struct pmcraid_cmd *cmd) /* Once either bist or pci reset is done, restore PCI config * space. If this fails, proceed with hard reset again */ - if (pci_restore_state(pinstance->pdev)) { - pmcraid_info("config-space error resetting again\n"); - pinstance->ioa_state = IOA_STATE_IN_RESET_ALERT; - pmcraid_reset_alert(cmd); - break; - } + pci_restore_state(pinstance->pdev); /* fail all pending commands */ pmcraid_fail_outstanding_cmds(pinstance); diff --git a/drivers/staging/sm7xx/smtcfb.c b/drivers/staging/sm7xx/smtcfb.c index 24f47d6388f4..7162dee3b0d8 100644 --- a/drivers/staging/sm7xx/smtcfb.c +++ b/drivers/staging/sm7xx/smtcfb.c @@ -1071,7 +1071,7 @@ static int __maybe_unused smtcfb_resume(struct pci_dev *pdev) /* when resuming, restore pci data and fb cursor */ if (pdev->dev.power.power_state.event != PM_EVENT_FREEZE) { retv = pci_set_power_state(pdev, PCI_D0); - retv = pci_restore_state(pdev); + pci_restore_state(pdev); if (pci_enable_device(pdev)) return -1; pci_set_master(pdev); -- cgit v1.2.1 From 23ea3793fd368fd6a1ea20659699e280e2996658 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 18 Nov 2010 15:02:31 -0800 Subject: PCI: fix __pci_device_probe kernel-doc warning Fix kernel-doc warning for __pci_device_probe(): Warning(drivers/pci/pci-driver.c:341): missing initial short description on line: * __pci_device_probe() Signed-off-by: Randy Dunlap Signed-off-by: Jesse Barnes --- drivers/pci/pci-driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 80e551ee640b..88246dd46452 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -338,7 +338,7 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, } /** - * __pci_device_probe() + * __pci_device_probe - check if a driver wants to claim a specific PCI device * @drv: driver to call to check if it wants the PCI device * @pci_dev: PCI device being probed * -- cgit v1.2.1 From ee8abf783dd36f65440fd782ad16f9768631d998 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 17 Nov 2010 12:10:40 -0800 Subject: PCI: Skip id checking if no id is passed Will get warning when pci stub driver is built-in kenel like: pci-stub: invalid id string "" So stop early if no id is passed. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/pci-stub.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/pci-stub.c b/drivers/pci/pci-stub.c index f7b68ca6cc98..4c0336b31caf 100644 --- a/drivers/pci/pci-stub.c +++ b/drivers/pci/pci-stub.c @@ -47,6 +47,10 @@ static int __init pci_stub_init(void) if (rc) return rc; + /* no ids passed actually */ + if (ids[0] == '\0') + return 0; + /* add ids specified in the module parameter */ p = ids; while ((id = strsep(&p, ","))) { -- cgit v1.2.1 From 99a0fadf561e1f553c08f0a29f8b2578f55dd5f0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 22 Dec 2010 10:06:36 +0100 Subject: PCI: pci-stub: ignore zero-length id parameters pci-stub uses strsep() to separate list of ids and generates a warning message when it fails to parse an id. However, not specifying the parameter results in ids set to an empty string. strsep() happily returns the empty string as the first token and thus triggers the warning message spuriously. Make the tokner ignore zero length ids. Reported-by: Chris Wright Reported-by: Prasad Joshi Cc: stable@kernel.org Signed-off-by: Jesse Barnes --- drivers/pci/pci-stub.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/pci/pci-stub.c b/drivers/pci/pci-stub.c index 4c0336b31caf..775e933c2225 100644 --- a/drivers/pci/pci-stub.c +++ b/drivers/pci/pci-stub.c @@ -58,6 +58,9 @@ static int __init pci_stub_init(void) subdevice = PCI_ANY_ID, class=0, class_mask=0; int fields; + if (!strlen(id)) + continue; + fields = sscanf(id, "%x:%x:%x:%x:%x:%x", &vendor, &device, &subvendor, &subdevice, &class, &class_mask); -- cgit v1.2.1 From fe31e69740eddc7316071ed5165fed6703c8cd12 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 19 Dec 2010 15:57:16 +0100 Subject: PCI/PCIe: Clear Root PME Status bits early during system resume I noticed that PCI Express PMEs don't work on my Toshiba Portege R500 after the system has been woken up from a sleep state by a PME (through Wake-on-LAN). After some investigation it turned out that the BIOS didn't clear the Root PME Status bit in the root port that received the wakeup PME and since the Requester ID was also set in the port's Root Status register, any subsequent PMEs didn't trigger interrupts. This problem can be avoided by clearing the Root PME Status bits in all PCI Express root ports during early resume. For this purpose, add an early resume routine to the PCIe port driver and make this driver be always registered, even if pci_ports_disable is set (in which case the driver's only function is to provide the early resume callback). Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pcie/pme.c | 27 ++++----------------------- drivers/pci/pcie/portdrv.h | 2 ++ drivers/pci/pcie/portdrv_core.c | 25 ++++++++++++++----------- drivers/pci/pcie/portdrv_pci.c | 37 +++++++++++++++++++++++++++++++++---- 4 files changed, 53 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c index 2f3c90407227..073f0308c6b2 100644 --- a/drivers/pci/pcie/pme.c +++ b/drivers/pci/pcie/pme.c @@ -26,9 +26,6 @@ #include "../pci.h" #include "portdrv.h" -#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ -#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ - /* * If this switch is set, MSI will not be used for PCIe PME signaling. This * causes the PCIe port driver to use INTx interrupts only, but it turns out @@ -73,22 +70,6 @@ void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable) pci_write_config_word(dev, rtctl_pos, rtctl); } -/** - * pcie_pme_clear_status - Clear root port PME interrupt status. - * @dev: PCIe root port or event collector. - */ -static void pcie_pme_clear_status(struct pci_dev *dev) -{ - int rtsta_pos; - u32 rtsta; - - rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA; - - pci_read_config_dword(dev, rtsta_pos, &rtsta); - rtsta |= PCI_EXP_RTSTA_PME; - pci_write_config_dword(dev, rtsta_pos, rtsta); -} - /** * pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#. * @bus: PCI bus to scan. @@ -253,7 +234,7 @@ static void pcie_pme_work_fn(struct work_struct *work) * Clear PME status of the port. If there are other * pending PMEs, the status will be set again. */ - pcie_pme_clear_status(port); + pcie_clear_root_pme_status(port); spin_unlock_irq(&data->lock); pcie_pme_handle_request(port, rtsta & 0xffff); @@ -378,7 +359,7 @@ static int pcie_pme_probe(struct pcie_device *srv) port = srv->port; pcie_pme_interrupt_enable(port, false); - pcie_pme_clear_status(port); + pcie_clear_root_pme_status(port); ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv); if (ret) { @@ -402,7 +383,7 @@ static int pcie_pme_suspend(struct pcie_device *srv) spin_lock_irq(&data->lock); pcie_pme_interrupt_enable(port, false); - pcie_pme_clear_status(port); + pcie_clear_root_pme_status(port); data->noirq = true; spin_unlock_irq(&data->lock); @@ -422,7 +403,7 @@ static int pcie_pme_resume(struct pcie_device *srv) spin_lock_irq(&data->lock); data->noirq = false; - pcie_pme_clear_status(port); + pcie_clear_root_pme_status(port); pcie_pme_interrupt_enable(port, true); spin_unlock_irq(&data->lock); diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index 7b5aba0a3291..8fcc03598b29 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -35,6 +35,8 @@ extern void pcie_port_bus_unregister(void); struct pci_dev; +extern void pcie_clear_root_pme_status(struct pci_dev *dev); + #ifdef CONFIG_PCIE_PME extern bool pcie_pme_msi_disabled; diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index a9c222d79ebc..5130d0d22390 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -241,17 +241,17 @@ static int get_port_device_capability(struct pci_dev *dev) int cap_mask; int err; + if (pcie_ports_disabled) + return 0; + err = pcie_port_platform_notify(dev, &cap_mask); - if (pcie_ports_auto) { - if (err) { - pcie_no_aspm(); - return 0; - } - } else { + if (!pcie_ports_auto) { cap_mask = PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP | PCIE_PORT_SERVICE_VC; if (pci_aer_available()) cap_mask |= PCIE_PORT_SERVICE_AER; + } else if (err) { + return 0; } pos = pci_pcie_cap(dev); @@ -349,15 +349,18 @@ int pcie_port_device_register(struct pci_dev *dev) int status, capabilities, i, nr_service; int irqs[PCIE_PORT_DEVICE_MAXSERVICES]; - /* Get and check PCI Express port services */ - capabilities = get_port_device_capability(dev); - if (!capabilities) - return -ENODEV; - /* Enable PCI Express port device */ status = pci_enable_device(dev); if (status) return status; + + /* Get and check PCI Express port services */ + capabilities = get_port_device_capability(dev); + if (!capabilities) { + pcie_no_aspm(); + return 0; + } + pci_set_master(dev); /* * Initialize service irqs. Don't use service devices that diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index f9033e190fb6..e0610bda1dea 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -57,6 +57,22 @@ __setup("pcie_ports=", pcie_port_setup); /* global data */ +/** + * pcie_clear_root_pme_status - Clear root port PME interrupt status. + * @dev: PCIe root port or event collector. + */ +void pcie_clear_root_pme_status(struct pci_dev *dev) +{ + int rtsta_pos; + u32 rtsta; + + rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA; + + pci_read_config_dword(dev, rtsta_pos, &rtsta); + rtsta |= PCI_EXP_RTSTA_PME; + pci_write_config_dword(dev, rtsta_pos, rtsta); +} + static int pcie_portdrv_restore_config(struct pci_dev *dev) { int retval; @@ -69,6 +85,20 @@ static int pcie_portdrv_restore_config(struct pci_dev *dev) } #ifdef CONFIG_PM +static int pcie_port_resume_noirq(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + + /* + * Some BIOSes forget to clear Root PME Status bits after system wakeup + * which breaks ACPI-based runtime wakeup on PCI Express, so clear those + * bits now just in case (shouldn't hurt). + */ + if(pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) + pcie_clear_root_pme_status(pdev); + return 0; +} + static const struct dev_pm_ops pcie_portdrv_pm_ops = { .suspend = pcie_port_device_suspend, .resume = pcie_port_device_resume, @@ -76,6 +106,7 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = { .thaw = pcie_port_device_resume, .poweroff = pcie_port_device_suspend, .restore = pcie_port_device_resume, + .resume_noirq = pcie_port_resume_noirq, }; #define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops) @@ -327,10 +358,8 @@ static int __init pcie_portdrv_init(void) { int retval; - if (pcie_ports_disabled) { - pcie_no_aspm(); - return -EACCES; - } + if (pcie_ports_disabled) + return pci_register_driver(&pcie_portdriver); dmi_check_system(pcie_portdrv_dmi_table); -- cgit v1.2.1 From d49278e3351b34870cbffffc5067348a318e7b06 Mon Sep 17 00:00:00 2001 From: Per Forlin Date: Mon, 20 Dec 2010 18:31:38 +0100 Subject: dmaengine: dma40: Add support to split up large elements The maximum transfer size of the stedma40 is (64k-1) x data-width. If the transfer size of one element exceeds this limit the job is split up and sent as linked transfer. Signed-off-by: Per Forlin Signed-off-by: Dan Williams --- drivers/dma/ste_dma40.c | 191 ++++++++++++++++++++++++++++------- drivers/dma/ste_dma40_ll.c | 246 +++++++++++++++++++++++++++++++-------------- drivers/dma/ste_dma40_ll.h | 36 +++---- 3 files changed, 343 insertions(+), 130 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index fab68a553205..6e1d46a65d0e 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -1,5 +1,6 @@ /* - * Copyright (C) ST-Ericsson SA 2007-2010 + * Copyright (C) Ericsson AB 2007-2008 + * Copyright (C) ST-Ericsson SA 2008-2010 * Author: Per Forlin for ST-Ericsson * Author: Jonas Aaberg for ST-Ericsson * License terms: GNU General Public License (GPL) version 2 @@ -554,8 +555,66 @@ static struct d40_desc *d40_last_queued(struct d40_chan *d40c) return d; } -/* Support functions for logical channels */ +static int d40_psize_2_burst_size(bool is_log, int psize) +{ + if (is_log) { + if (psize == STEDMA40_PSIZE_LOG_1) + return 1; + } else { + if (psize == STEDMA40_PSIZE_PHY_1) + return 1; + } + + return 2 << psize; +} + +/* + * The dma only supports transmitting packages up to + * STEDMA40_MAX_SEG_SIZE << data_width. Calculate the total number of + * dma elements required to send the entire sg list + */ +static int d40_size_2_dmalen(int size, u32 data_width1, u32 data_width2) +{ + int dmalen; + u32 max_w = max(data_width1, data_width2); + u32 min_w = min(data_width1, data_width2); + u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE << min_w, 1 << max_w); + + if (seg_max > STEDMA40_MAX_SEG_SIZE) + seg_max -= (1 << max_w); + + if (!IS_ALIGNED(size, 1 << max_w)) + return -EINVAL; + + if (size <= seg_max) + dmalen = 1; + else { + dmalen = size / seg_max; + if (dmalen * seg_max < size) + dmalen++; + } + return dmalen; +} + +static int d40_sg_2_dmalen(struct scatterlist *sgl, int sg_len, + u32 data_width1, u32 data_width2) +{ + struct scatterlist *sg; + int i; + int len = 0; + int ret; + + for_each_sg(sgl, sg, sg_len, i) { + ret = d40_size_2_dmalen(sg_dma_len(sg), + data_width1, data_width2); + if (ret < 0) + return ret; + len += ret; + } + return len; +} +/* Support functions for logical channels */ static int d40_channel_execute_command(struct d40_chan *d40c, enum d40_command command) @@ -1241,6 +1300,21 @@ static int d40_validate_conf(struct d40_chan *d40c, res = -EINVAL; } + if (d40_psize_2_burst_size(is_log, conf->src_info.psize) * + (1 << conf->src_info.data_width) != + d40_psize_2_burst_size(is_log, conf->dst_info.psize) * + (1 << conf->dst_info.data_width)) { + /* + * The DMAC hardware only supports + * src (burst x width) == dst (burst x width) + */ + + dev_err(&d40c->chan.dev->device, + "[%s] src (burst x width) != dst (burst x width)\n", + __func__); + res = -EINVAL; + } + return res; } @@ -1638,13 +1712,21 @@ struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, if (d40d == NULL) goto err; - d40d->lli_len = sgl_len; + d40d->lli_len = d40_sg_2_dmalen(sgl_dst, sgl_len, + d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width); + if (d40d->lli_len < 0) { + dev_err(&d40c->chan.dev->device, + "[%s] Unaligned size\n", __func__); + goto err; + } + d40d->lli_current = 0; d40d->txd.flags = dma_flags; if (d40c->log_num != D40_PHY_CHAN) { - if (d40_pool_lli_alloc(d40d, sgl_len, true) < 0) { + if (d40_pool_lli_alloc(d40d, d40d->lli_len, true) < 0) { dev_err(&d40c->chan.dev->device, "[%s] Out of memory\n", __func__); goto err; @@ -1654,15 +1736,17 @@ struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, sgl_len, d40d->lli_log.src, d40c->log_def.lcsp1, - d40c->dma_cfg.src_info.data_width); + d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width); (void) d40_log_sg_to_lli(sgl_dst, sgl_len, d40d->lli_log.dst, d40c->log_def.lcsp3, - d40c->dma_cfg.dst_info.data_width); + d40c->dma_cfg.dst_info.data_width, + d40c->dma_cfg.src_info.data_width); } else { - if (d40_pool_lli_alloc(d40d, sgl_len, false) < 0) { + if (d40_pool_lli_alloc(d40d, d40d->lli_len, false) < 0) { dev_err(&d40c->chan.dev->device, "[%s] Out of memory\n", __func__); goto err; @@ -1675,6 +1759,7 @@ struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, virt_to_phys(d40d->lli_phy.src), d40c->src_def_cfg, d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width, d40c->dma_cfg.src_info.psize); if (res < 0) @@ -1687,6 +1772,7 @@ struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan, virt_to_phys(d40d->lli_phy.dst), d40c->dst_def_cfg, d40c->dma_cfg.dst_info.data_width, + d40c->dma_cfg.src_info.data_width, d40c->dma_cfg.dst_info.psize); if (res < 0) @@ -1826,7 +1912,6 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); unsigned long flags; - int err = 0; if (d40c->phy_chan == NULL) { dev_err(&d40c->chan.dev->device, @@ -1844,6 +1929,15 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, } d40d->txd.flags = dma_flags; + d40d->lli_len = d40_size_2_dmalen(size, + d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width); + if (d40d->lli_len < 0) { + dev_err(&d40c->chan.dev->device, + "[%s] Unaligned size\n", __func__); + goto err; + } + dma_async_tx_descriptor_init(&d40d->txd, chan); @@ -1851,37 +1945,40 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, if (d40c->log_num != D40_PHY_CHAN) { - if (d40_pool_lli_alloc(d40d, 1, true) < 0) { + if (d40_pool_lli_alloc(d40d, d40d->lli_len, true) < 0) { dev_err(&d40c->chan.dev->device, "[%s] Out of memory\n", __func__); goto err; } - d40d->lli_len = 1; d40d->lli_current = 0; - d40_log_fill_lli(d40d->lli_log.src, - src, - size, - d40c->log_def.lcsp1, - d40c->dma_cfg.src_info.data_width, - true); + if (d40_log_buf_to_lli(d40d->lli_log.src, + src, + size, + d40c->log_def.lcsp1, + d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width, + true) == NULL) + goto err; - d40_log_fill_lli(d40d->lli_log.dst, - dst, - size, - d40c->log_def.lcsp3, - d40c->dma_cfg.dst_info.data_width, - true); + if (d40_log_buf_to_lli(d40d->lli_log.dst, + dst, + size, + d40c->log_def.lcsp3, + d40c->dma_cfg.dst_info.data_width, + d40c->dma_cfg.src_info.data_width, + true) == NULL) + goto err; } else { - if (d40_pool_lli_alloc(d40d, 1, false) < 0) { + if (d40_pool_lli_alloc(d40d, d40d->lli_len, false) < 0) { dev_err(&d40c->chan.dev->device, "[%s] Out of memory\n", __func__); goto err; } - err = d40_phy_fill_lli(d40d->lli_phy.src, + if (d40_phy_buf_to_lli(d40d->lli_phy.src, src, size, d40c->dma_cfg.src_info.psize, @@ -1889,11 +1986,11 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, d40c->src_def_cfg, true, d40c->dma_cfg.src_info.data_width, - false); - if (err) - goto err_fill_lli; + d40c->dma_cfg.dst_info.data_width, + false) == NULL) + goto err; - err = d40_phy_fill_lli(d40d->lli_phy.dst, + if (d40_phy_buf_to_lli(d40d->lli_phy.dst, dst, size, d40c->dma_cfg.dst_info.psize, @@ -1901,10 +1998,9 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, d40c->dst_def_cfg, true, d40c->dma_cfg.dst_info.data_width, - false); - - if (err) - goto err_fill_lli; + d40c->dma_cfg.src_info.data_width, + false) == NULL) + goto err; (void) dma_map_single(d40c->base->dev, d40d->lli_phy.src, d40d->lli_pool.size, DMA_TO_DEVICE); @@ -1913,9 +2009,6 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, spin_unlock_irqrestore(&d40c->lock, flags); return &d40d->txd; -err_fill_lli: - dev_err(&d40c->chan.dev->device, - "[%s] Failed filling in PHY LLI\n", __func__); err: if (d40d) d40_desc_free(d40c, d40d); @@ -1945,13 +2038,21 @@ static int d40_prep_slave_sg_log(struct d40_desc *d40d, dma_addr_t dev_addr = 0; int total_size; - if (d40_pool_lli_alloc(d40d, sg_len, true) < 0) { + d40d->lli_len = d40_sg_2_dmalen(sgl, sg_len, + d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width); + if (d40d->lli_len < 0) { + dev_err(&d40c->chan.dev->device, + "[%s] Unaligned size\n", __func__); + return -EINVAL; + } + + if (d40_pool_lli_alloc(d40d, d40d->lli_len, true) < 0) { dev_err(&d40c->chan.dev->device, "[%s] Out of memory\n", __func__); return -ENOMEM; } - d40d->lli_len = sg_len; d40d->lli_current = 0; if (direction == DMA_FROM_DEVICE) @@ -1993,13 +2094,21 @@ static int d40_prep_slave_sg_phy(struct d40_desc *d40d, dma_addr_t dst_dev_addr; int res; - if (d40_pool_lli_alloc(d40d, sgl_len, false) < 0) { + d40d->lli_len = d40_sg_2_dmalen(sgl, sgl_len, + d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width); + if (d40d->lli_len < 0) { + dev_err(&d40c->chan.dev->device, + "[%s] Unaligned size\n", __func__); + return -EINVAL; + } + + if (d40_pool_lli_alloc(d40d, d40d->lli_len, false) < 0) { dev_err(&d40c->chan.dev->device, "[%s] Out of memory\n", __func__); return -ENOMEM; } - d40d->lli_len = sgl_len; d40d->lli_current = 0; if (direction == DMA_FROM_DEVICE) { @@ -2024,6 +2133,7 @@ static int d40_prep_slave_sg_phy(struct d40_desc *d40d, virt_to_phys(d40d->lli_phy.src), d40c->src_def_cfg, d40c->dma_cfg.src_info.data_width, + d40c->dma_cfg.dst_info.data_width, d40c->dma_cfg.src_info.psize); if (res < 0) return res; @@ -2035,6 +2145,7 @@ static int d40_prep_slave_sg_phy(struct d40_desc *d40d, virt_to_phys(d40d->lli_phy.dst), d40c->dst_def_cfg, d40c->dma_cfg.dst_info.data_width, + d40c->dma_cfg.src_info.data_width, d40c->dma_cfg.dst_info.psize); if (res < 0) return res; @@ -2244,6 +2355,8 @@ static void d40_set_runtime_config(struct dma_chan *chan, psize = STEDMA40_PSIZE_PHY_8; else if (config_maxburst >= 4) psize = STEDMA40_PSIZE_PHY_4; + else if (config_maxburst >= 2) + psize = STEDMA40_PSIZE_PHY_2; else psize = STEDMA40_PSIZE_PHY_1; } diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c index 8557cb88b255..0b096a38322d 100644 --- a/drivers/dma/ste_dma40_ll.c +++ b/drivers/dma/ste_dma40_ll.c @@ -1,6 +1,6 @@ /* * Copyright (C) ST-Ericsson SA 2007-2010 - * Author: Per Friden for ST-Ericsson + * Author: Per Forlin for ST-Ericsson * Author: Jonas Aaberg for ST-Ericsson * License terms: GNU General Public License (GPL) version 2 */ @@ -122,15 +122,15 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, *dst_cfg = dst; } -int d40_phy_fill_lli(struct d40_phy_lli *lli, - dma_addr_t data, - u32 data_size, - int psize, - dma_addr_t next_lli, - u32 reg_cfg, - bool term_int, - u32 data_width, - bool is_device) +static int d40_phy_fill_lli(struct d40_phy_lli *lli, + dma_addr_t data, + u32 data_size, + int psize, + dma_addr_t next_lli, + u32 reg_cfg, + bool term_int, + u32 data_width, + bool is_device) { int num_elems; @@ -139,13 +139,6 @@ int d40_phy_fill_lli(struct d40_phy_lli *lli, else num_elems = 2 << psize; - /* - * Size is 16bit. data_width is 8, 16, 32 or 64 bit - * Block large than 64 KiB must be split. - */ - if (data_size > (0xffff << data_width)) - return -EINVAL; - /* Must be aligned */ if (!IS_ALIGNED(data, 0x1 << data_width)) return -EINVAL; @@ -187,55 +180,118 @@ int d40_phy_fill_lli(struct d40_phy_lli *lli, return 0; } +static int d40_seg_size(int size, int data_width1, int data_width2) +{ + u32 max_w = max(data_width1, data_width2); + u32 min_w = min(data_width1, data_width2); + u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE << min_w, 1 << max_w); + + if (seg_max > STEDMA40_MAX_SEG_SIZE) + seg_max -= (1 << max_w); + + if (size <= seg_max) + return size; + + if (size <= 2 * seg_max) + return ALIGN(size / 2, 1 << max_w); + + return seg_max; +} + +struct d40_phy_lli *d40_phy_buf_to_lli(struct d40_phy_lli *lli, + dma_addr_t addr, + u32 size, + int psize, + dma_addr_t lli_phys, + u32 reg_cfg, + bool term_int, + u32 data_width1, + u32 data_width2, + bool is_device) +{ + int err; + dma_addr_t next = lli_phys; + int size_rest = size; + int size_seg = 0; + + do { + size_seg = d40_seg_size(size_rest, data_width1, data_width2); + size_rest -= size_seg; + + if (term_int && size_rest == 0) + next = 0; + else + next = ALIGN(next + sizeof(struct d40_phy_lli), + D40_LLI_ALIGN); + + err = d40_phy_fill_lli(lli, + addr, + size_seg, + psize, + next, + reg_cfg, + !next, + data_width1, + is_device); + + if (err) + goto err; + + lli++; + if (!is_device) + addr += size_seg; + } while (size_rest); + + return lli; + + err: + return NULL; +} + int d40_phy_sg_to_lli(struct scatterlist *sg, int sg_len, dma_addr_t target, - struct d40_phy_lli *lli, + struct d40_phy_lli *lli_sg, dma_addr_t lli_phys, u32 reg_cfg, - u32 data_width, + u32 data_width1, + u32 data_width2, int psize) { int total_size = 0; int i; struct scatterlist *current_sg = sg; - dma_addr_t next_lli_phys; dma_addr_t dst; - int err = 0; + struct d40_phy_lli *lli = lli_sg; + dma_addr_t l_phys = lli_phys; for_each_sg(sg, current_sg, sg_len, i) { total_size += sg_dma_len(current_sg); - /* If this scatter list entry is the last one, no next link */ - if (sg_len - 1 == i) - next_lli_phys = 0; - else - next_lli_phys = ALIGN(lli_phys + (i + 1) * - sizeof(struct d40_phy_lli), - D40_LLI_ALIGN); - if (target) dst = target; else dst = sg_phys(current_sg); - err = d40_phy_fill_lli(&lli[i], - dst, - sg_dma_len(current_sg), - psize, - next_lli_phys, - reg_cfg, - !next_lli_phys, - data_width, - target == dst); - if (err) - goto err; + l_phys = ALIGN(lli_phys + (lli - lli_sg) * + sizeof(struct d40_phy_lli), D40_LLI_ALIGN); + + lli = d40_phy_buf_to_lli(lli, + dst, + sg_dma_len(current_sg), + psize, + l_phys, + reg_cfg, + sg_len - 1 == i, + data_width1, + data_width2, + target == dst); + if (lli == NULL) + return -EINVAL; } return total_size; -err: - return err; } @@ -315,17 +371,20 @@ void d40_log_lli_lcla_write(struct d40_log_lli *lcla, writel(lli_dst->lcsp13, &lcla[1].lcsp13); } -void d40_log_fill_lli(struct d40_log_lli *lli, - dma_addr_t data, u32 data_size, - u32 reg_cfg, - u32 data_width, - bool addr_inc) +static void d40_log_fill_lli(struct d40_log_lli *lli, + dma_addr_t data, u32 data_size, + u32 reg_cfg, + u32 data_width, + bool addr_inc) { lli->lcsp13 = reg_cfg; /* The number of elements to transfer */ lli->lcsp02 = ((data_size >> data_width) << D40_MEM_LCSP0_ECNT_POS) & D40_MEM_LCSP0_ECNT_MASK; + + BUG_ON((data_size >> data_width) > STEDMA40_MAX_SEG_SIZE); + /* 16 LSBs address of the current element */ lli->lcsp02 |= data & D40_MEM_LCSP0_SPTR_MASK; /* 16 MSBs address of the current element */ @@ -348,55 +407,94 @@ int d40_log_sg_to_dev(struct scatterlist *sg, int total_size = 0; struct scatterlist *current_sg = sg; int i; + struct d40_log_lli *lli_src = lli->src; + struct d40_log_lli *lli_dst = lli->dst; for_each_sg(sg, current_sg, sg_len, i) { total_size += sg_dma_len(current_sg); if (direction == DMA_TO_DEVICE) { - d40_log_fill_lli(&lli->src[i], - sg_phys(current_sg), - sg_dma_len(current_sg), - lcsp->lcsp1, src_data_width, - true); - d40_log_fill_lli(&lli->dst[i], - dev_addr, - sg_dma_len(current_sg), - lcsp->lcsp3, dst_data_width, - false); + lli_src = + d40_log_buf_to_lli(lli_src, + sg_phys(current_sg), + sg_dma_len(current_sg), + lcsp->lcsp1, src_data_width, + dst_data_width, + true); + lli_dst = + d40_log_buf_to_lli(lli_dst, + dev_addr, + sg_dma_len(current_sg), + lcsp->lcsp3, dst_data_width, + src_data_width, + false); } else { - d40_log_fill_lli(&lli->dst[i], - sg_phys(current_sg), - sg_dma_len(current_sg), - lcsp->lcsp3, dst_data_width, - true); - d40_log_fill_lli(&lli->src[i], - dev_addr, - sg_dma_len(current_sg), - lcsp->lcsp1, src_data_width, - false); + lli_dst = + d40_log_buf_to_lli(lli_dst, + sg_phys(current_sg), + sg_dma_len(current_sg), + lcsp->lcsp3, dst_data_width, + src_data_width, + true); + lli_src = + d40_log_buf_to_lli(lli_src, + dev_addr, + sg_dma_len(current_sg), + lcsp->lcsp1, src_data_width, + dst_data_width, + false); } } return total_size; } +struct d40_log_lli *d40_log_buf_to_lli(struct d40_log_lli *lli_sg, + dma_addr_t addr, + int size, + u32 lcsp13, /* src or dst*/ + u32 data_width1, + u32 data_width2, + bool addr_inc) +{ + struct d40_log_lli *lli = lli_sg; + int size_rest = size; + int size_seg = 0; + + do { + size_seg = d40_seg_size(size_rest, data_width1, data_width2); + size_rest -= size_seg; + + d40_log_fill_lli(lli, + addr, + size_seg, + lcsp13, data_width1, + addr_inc); + if (addr_inc) + addr += size_seg; + lli++; + } while (size_rest); + + return lli; +} + int d40_log_sg_to_lli(struct scatterlist *sg, int sg_len, struct d40_log_lli *lli_sg, u32 lcsp13, /* src or dst*/ - u32 data_width) + u32 data_width1, u32 data_width2) { int total_size = 0; struct scatterlist *current_sg = sg; int i; + struct d40_log_lli *lli = lli_sg; for_each_sg(sg, current_sg, sg_len, i) { total_size += sg_dma_len(current_sg); - - d40_log_fill_lli(&lli_sg[i], - sg_phys(current_sg), - sg_dma_len(current_sg), - lcsp13, data_width, - true); + lli = d40_log_buf_to_lli(lli, + sg_phys(current_sg), + sg_dma_len(current_sg), + lcsp13, + data_width1, data_width2, true); } return total_size; } diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h index 9e419b907544..9cc43495bea2 100644 --- a/drivers/dma/ste_dma40_ll.h +++ b/drivers/dma/ste_dma40_ll.h @@ -292,18 +292,20 @@ int d40_phy_sg_to_lli(struct scatterlist *sg, struct d40_phy_lli *lli, dma_addr_t lli_phys, u32 reg_cfg, - u32 data_width, + u32 data_width1, + u32 data_width2, int psize); -int d40_phy_fill_lli(struct d40_phy_lli *lli, - dma_addr_t data, - u32 data_size, - int psize, - dma_addr_t next_lli, - u32 reg_cfg, - bool term_int, - u32 data_width, - bool is_device); +struct d40_phy_lli *d40_phy_buf_to_lli(struct d40_phy_lli *lli, + dma_addr_t data, + u32 data_size, + int psize, + dma_addr_t next_lli, + u32 reg_cfg, + bool term_int, + u32 data_width1, + u32 data_width2, + bool is_device); void d40_phy_lli_write(void __iomem *virtbase, u32 phy_chan_num, @@ -312,12 +314,12 @@ void d40_phy_lli_write(void __iomem *virtbase, /* Logical channels */ -void d40_log_fill_lli(struct d40_log_lli *lli, - dma_addr_t data, - u32 data_size, - u32 reg_cfg, - u32 data_width, - bool addr_inc); +struct d40_log_lli *d40_log_buf_to_lli(struct d40_log_lli *lli_sg, + dma_addr_t addr, + int size, + u32 lcsp13, /* src or dst*/ + u32 data_width1, u32 data_width2, + bool addr_inc); int d40_log_sg_to_dev(struct scatterlist *sg, int sg_len, @@ -332,7 +334,7 @@ int d40_log_sg_to_lli(struct scatterlist *sg, int sg_len, struct d40_log_lli *lli_sg, u32 lcsp13, /* src or dst*/ - u32 data_width); + u32 data_width1, u32 data_width2); void d40_log_lli_lcpa_write(struct d40_log_lli_full *lcpa, struct d40_log_lli *lli_dst, -- cgit v1.2.1 From e8b5e11df3d02e7bbd85c025cc705a8e67746f73 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:30:24 +0000 Subject: ARM: PL08x: fix spelling errors Correct mis-spellings in comments and printk strings. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 37 +++++++++++++++++-------------------- 1 file changed, 17 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index b605cc9ac3a2..3da49ed5f800 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -19,7 +19,7 @@ * this program; if not, write to the Free Software Foundation, Inc., 59 * Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * The full GNU General Public License is iin this distribution in the + * The full GNU General Public License is in this distribution in the * file called COPYING. * * Documentation: ARM DDI 0196G == PL080 @@ -82,7 +82,7 @@ /** * struct vendor_data - vendor-specific config parameters - * for PL08x derivates + * for PL08x derivatives * @name: the name of this specific variant * @channels: the number of channels available in this variant * @dualmaster: whether this version supports dual AHB masters @@ -96,10 +96,8 @@ struct vendor_data { /* * PL08X private data structures - * An LLI struct - see pl08x TRM - * Note that next uses bit[0] as a bus bit, - * start & end do not - their bus bit info - * is in cctl + * An LLI struct - see PL08x TRM. Note that next uses bit[0] as a bus bit, + * start & end do not - their bus bit info is in cctl. */ struct lli { dma_addr_t src; @@ -152,7 +150,7 @@ struct pl08x_driver_data { /* Size (bytes) of each LLI buffer allocated for one transfer */ # define PL08X_LLI_TSFR_SIZE 0x2000 -/* Maximimum times we call dma_pool_alloc on this pool without freeing */ +/* Maximum times we call dma_pool_alloc on this pool without freeing */ #define PL08X_MAX_ALLOCS 0x40 #define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct lli)) #define PL08X_ALIGN 8 @@ -177,7 +175,7 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch) /* * Set the initial DMA register values i.e. those for the first LLI - * The next lli pointer and the configuration interrupt bit have + * The next LLI pointer and the configuration interrupt bit have * been set when the LLIs were constructed */ static void pl08x_set_cregs(struct pl08x_driver_data *pl08x, @@ -366,8 +364,7 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) while (clli) { bytes += get_bytes_in_cctl(llis_va[i].cctl); /* - * A clli of 0x00000000 will terminate the - * LLI list + * A LLI pointer of 0 terminates the LLI list */ clli = llis_va[i].next; i++; @@ -469,7 +466,7 @@ static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth, { u32 retbits = cctl; - /* Remove all src, dst and transfersize bits */ + /* Remove all src, dst and transfer size bits */ retbits &= ~PL080_CONTROL_DWIDTH_MASK; retbits &= ~PL080_CONTROL_SWIDTH_MASK; retbits &= ~PL080_CONTROL_TRANSFER_SIZE_MASK; @@ -701,7 +698,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * Choose bus to align to * - prefers destination bus if both available * - if fixed address on one bus chooses other - * - modifies cctl to choose an apropriate master + * - modifies cctl to choose an appropriate master */ pl08x_choose_master_bus(&txd->srcbus, &txd->dstbus, &mbus, &sbus, cctl); @@ -775,7 +772,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, target_len = max_bytes_per_lli; /* - * Set bus lengths for incrementing busses + * Set bus lengths for incrementing buses * to number of bytes which fill to next memory * boundary */ @@ -826,7 +823,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* * So now we know how many bytes to transfer * to get to the nearest boundary - * The next lli will past the boundary + * The next LLI will past the boundary * - however we may be working to a boundary * on the slave bus * We need to ensure the master stays aligned @@ -884,7 +881,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, && (remainder); j++) { cctl = pl08x_cctl_bits(cctl, 1, 1, 1); dev_vdbg(&pl08x->adev->dev, - "%s align with boundardy, single byte (remain %08x)\n", + "%s align with boundary, single byte (remain %08x)\n", __func__, remainder); num_llis = pl08x_fill_lli_for_desc(pl08x, @@ -907,7 +904,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, while (remainder) { cctl = pl08x_cctl_bits(cctl, 1, 1, 1); dev_vdbg(&pl08x->adev->dev, - "%s align with boundardy, single odd byte (remain %d)\n", + "%s align with boundary, single odd byte (remain %d)\n", __func__, remainder); num_llis = pl08x_fill_lli_for_desc(pl08x, txd, num_llis, 1, cctl, &remainder); @@ -1367,8 +1364,8 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, * available to handle it whereas slave transfers may * have been denied due to platform channel muxing restrictions * and since there is no guarantee that this will ever be - * resolved, and since the signal must be aquired AFTER - * aquiring the physical channel, we will let them be NACK:ed + * resolved, and since the signal must be acquired AFTER + * acquiring the physical channel, we will let them be NACK:ed * with -EBUSY here. The drivers can alway retry the prep() * call if they are eager on doing this using DMA. */ @@ -1620,7 +1617,7 @@ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) val = readl(pl08x->base + PL080_CONFIG); val &= ~(PL080_CONFIG_M2_BE | PL080_CONFIG_M1_BE | PL080_CONFIG_ENABLE); - /* We implictly clear bit 1 and that means little-endian mode */ + /* We implicitly clear bit 1 and that means little-endian mode */ val |= PL080_CONFIG_ENABLE; writel(val, pl08x->base + PL080_CONFIG); } @@ -2160,7 +2157,7 @@ static int __init pl08x_init(void) retval = amba_driver_register(&pl08x_amba_driver); if (retval) printk(KERN_WARNING DRIVER_NAME - "failed to register as an amba device (%d)\n", + "failed to register as an AMBA device (%d)\n", retval); return retval; } -- cgit v1.2.1 From 4440aacf3a171a0ab498feda58d100a320c5d9ff Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:30:44 +0000 Subject: ARM: PL08x: fix array overflow in dma_set_runtime_config() If maxburst was passed in as zero, we would overflow the burst_sizes[] array. Fix this by checking for this condition, and defaulting to single transfer 'bursts'. Improve the readability of the loop using a for() loop rather than a while() loop with the iterator initialized far from the loop. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 3da49ed5f800..0809810f9e7a 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1207,7 +1207,7 @@ static void dma_set_runtime_config(struct dma_chan *chan, u32 cctl = 0; /* Mask out all except src and dst channel */ u32 ccfg = cd->ccfg & 0x000003DEU; - int i = 0; + int i; /* Transfer direction */ plchan->runtime_direction = config->direction; @@ -1250,18 +1250,17 @@ static void dma_set_runtime_config(struct dma_chan *chan, /* * Now decide on a maxburst: - * If this channel will only request single transfers, set - * this down to ONE element. + * If this channel will only request single transfers, set this + * down to ONE element. Also select one element if no maxburst + * is specified. */ - if (plchan->cd->single) { + if (plchan->cd->single || maxburst == 0) { cctl |= (PL080_BSIZE_1 << PL080_CONTROL_SB_SIZE_SHIFT) | (PL080_BSIZE_1 << PL080_CONTROL_DB_SIZE_SHIFT); } else { - while (i < ARRAY_SIZE(burst_sizes)) { + for (i = 0; i < ARRAY_SIZE(burst_sizes); i++) if (burst_sizes[i].burstwords <= maxburst) break; - i++; - } cctl |= burst_sizes[i].reg; } -- cgit v1.2.1 From 91aa5fadb831e7b6ea473a526a6b49c6dc4819ce Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:31:04 +0000 Subject: ARM: PL08x: fix atomic_t usage and tx_submit() return value range The last_issued variable uses an atomic type, which is only incremented inside a protected region, and then read. Everywhere else only reads the value, so it isn't using atomic_t correctly, and it doesn't even need to. Moreover, the DMA engine code provides us with a variable for this already - chan.cookie. Use chan.cookie instead. Also, avoid negative dma_cookie_t values - negative returns from tx_submit() mean failure, yet in reality we always succeed. Restart from cookie 1, just like other DMA engine drivers do. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 0809810f9e7a..5d9a15652dba 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -74,7 +74,6 @@ #include #include #include -#include #include #include @@ -1082,8 +1081,10 @@ static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) { struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan); - atomic_inc(&plchan->last_issued); - tx->cookie = atomic_read(&plchan->last_issued); + plchan->chan.cookie += 1; + if (plchan->chan.cookie < 0) + plchan->chan.cookie = 1; + tx->cookie = plchan->chan.cookie; /* This unlock follows the lock in the prep() function */ spin_unlock_irqrestore(&plchan->lock, plchan->lockflags); @@ -1115,7 +1116,7 @@ pl08x_dma_tx_status(struct dma_chan *chan, enum dma_status ret; u32 bytesleft = 0; - last_used = atomic_read(&plchan->last_issued); + last_used = plchan->chan.cookie; last_complete = plchan->lc; ret = dma_async_is_complete(cookie, last_complete, last_used); @@ -1131,7 +1132,7 @@ pl08x_dma_tx_status(struct dma_chan *chan, /* * This cookie not complete yet */ - last_used = atomic_read(&plchan->last_issued); + last_used = plchan->chan.cookie; last_complete = plchan->lc; /* Get number of bytes left in the active transactions and queue */ @@ -1641,8 +1642,7 @@ static void pl08x_tasklet(unsigned long data) /* * Update last completed */ - plchan->lc = - (plchan->at->tx.cookie); + plchan->lc = plchan->at->tx.cookie; /* * Callback to signal completion @@ -1820,8 +1820,8 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, chan->name); chan->chan.device = dmadev; - atomic_set(&chan->last_issued, 0); - chan->lc = atomic_read(&chan->last_issued); + chan->chan.cookie = 0; + chan->lc = 0; spin_lock_init(&chan->lock); INIT_LIST_HEAD(&chan->desc_list); -- cgit v1.2.1 From bf072af461c166964fb110cfcafccd752fbb4c64 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:31:24 +0000 Subject: ARM: PL08x: fix locking in tasklet Tasklets are run from an interruptible context. The slave DMA functions can be called from within IRQ handlers. Taking the spinlock without disabling interrupts allows an interrupt handler to run, which may try to take the spinlock again, resulting in deadlock. Fix this by using the irqsave spinlocks. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 5d9a15652dba..69cfb05e4d3c 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1627,11 +1627,12 @@ static void pl08x_tasklet(unsigned long data) struct pl08x_dma_chan *plchan = (struct pl08x_dma_chan *) data; struct pl08x_phy_chan *phychan = plchan->phychan; struct pl08x_driver_data *pl08x = plchan->host; + unsigned long flags; if (!plchan) BUG(); - spin_lock(&plchan->lock); + spin_lock_irqsave(&plchan->lock, flags); if (plchan->at) { dma_async_tx_callback callback = @@ -1728,7 +1729,7 @@ static void pl08x_tasklet(unsigned long data) } } - spin_unlock(&plchan->lock); + spin_unlock_irqrestore(&plchan->lock, flags); } static irqreturn_t pl08x_irq(int irq, void *dev) -- cgit v1.2.1 From dafa73171be8dd31b485f5839e3376b1ca908e24 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:31:45 +0000 Subject: ARM: PL08x: fix a leak when preparing TXDs If we fail to allocate the LLI, the prep_* function will return NULL. However, the TXD we allocated will not be placed on any list, nor will it be freed - we'll just drop all references to it. Make sure we free it rather than leaking TXDs. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 69cfb05e4d3c..b3b3180ce561 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1332,9 +1332,10 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, int ret; num_llis = pl08x_fill_llis_for_desc(pl08x, txd); - - if (!num_llis) + if (!num_llis) { + kfree(txd); return -EINVAL; + } spin_lock_irqsave(&plchan->lock, plchan->lockflags); -- cgit v1.2.1 From 9c0bb43bbd02fba0b235f8993d1f175734fa8735 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:32:05 +0000 Subject: ARM: PL08x: fix missed spin-unlock in pl08x_issue_pending() pl08x_issue_pending() returns with the spinlock locked and interrupts disabled if the channel is waiting for a physical DMA to become free. This is wrong - especially as pl08x_issue_pending() is an API function as it leads to deadlocks. Fix it to always return with the spinlock unlocked. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index b3b3180ce561..9a8d44504c6a 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1294,15 +1294,11 @@ static void pl08x_issue_pending(struct dma_chan *chan) unsigned long flags; spin_lock_irqsave(&plchan->lock, flags); - /* Something is already active */ - if (plchan->at) { - spin_unlock_irqrestore(&plchan->lock, flags); - return; - } - - /* Didn't get a physical channel so waiting for it ... */ - if (plchan->state == PL08X_CHAN_WAITING) + /* Something is already active, or we're waiting for a channel... */ + if (plchan->at || plchan->state == PL08X_CHAN_WAITING) { + spin_unlock_irqrestore(&plchan->lock, flags); return; + } /* Take the first element in the queue and execute it */ if (!list_empty(&plchan->desc_list)) { -- cgit v1.2.1 From 98838f90d92f6f0abf6d6a99880c0ff3127633b8 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:32:26 +0000 Subject: ARM: PL08x: fix deadlock in terminate_all Trying to disable a tasklet while holding a spinlock which the tasklet will take is a recipe for deadlock - tasklet_disable() will wait for the tasklet to finish running, which it will never do. In any case, there is not a corresponding tasklet_enable(), so once the tasklet is disabled, it will never run again until reboot. It's safe to just remove the tasklet_disable() as we remove all current and pending descriptors before releasing this spinlock. This means that the tasklet will find no remaining work if it subsequently runs. The only remaining issue is that the callback for an already submitted txd may be in progress, or even called after terminate_all() returns. There's not much that can be done about that as waiting for the callback to complete before returning will also lead to deadlocks. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 9a8d44504c6a..4ca1eb122e07 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1560,8 +1560,6 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, pl08x_put_phy_channel(pl08x, plchan->phychan); plchan->phychan = NULL; } - /* Stop any pending tasklet */ - tasklet_disable(&plchan->tasklet); /* Dequeue jobs and free LLIs */ if (plchan->at) { pl08x_free_txd(pl08x, plchan->at); -- cgit v1.2.1 From 3e2a037c1de79af999a54581cbf1e8a5c933fd95 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:32:46 +0000 Subject: ARM: PL08x: fix sparse warnings drivers/dma/amba-pl08x.c:1895:40: warning: Unknown escape '%' drivers/dma/amba-pl08x.c:1903:40: warning: Unknown escape '%' drivers/dma/amba-pl08x.c:513:6: warning: symbol 'pl08x_choose_master_bus' was not declared. Should it be static? drivers/dma/amba-pl08x.c:604:5: warning: symbol 'pl08x_fill_llis_for_desc' was not declared. Should it be static? drivers/dma/amba-pl08x.c:1442:32: warning: symbol 'pl08x_prep_slave_sg' was not declared. Should it be static? Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 4ca1eb122e07..74fa5a0f1490 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -510,7 +510,7 @@ static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth, * this prefers the destination bus if both available * if fixed address on one bus the other will be chosen */ -void pl08x_choose_master_bus(struct pl08x_bus_data *src_bus, +static void pl08x_choose_master_bus(struct pl08x_bus_data *src_bus, struct pl08x_bus_data *dst_bus, struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl) { @@ -545,7 +545,7 @@ void pl08x_choose_master_bus(struct pl08x_bus_data *src_bus, * Fills in one LLI for a certain transfer descriptor * and advance the counter */ -int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, +static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd, int num_llis, int len, u32 cctl, u32 *remainder) { @@ -1439,7 +1439,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( return &txd->tx; } -struct dma_async_tx_descriptor *pl08x_prep_slave_sg( +static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_data_direction direction, unsigned long flags) @@ -1890,7 +1890,7 @@ static int pl08x_debugfs_show(struct seq_file *s, void *data) seq_printf(s, "CHANNEL:\tSTATE:\n"); seq_printf(s, "--------\t------\n"); list_for_each_entry(chan, &pl08x->memcpy.channels, chan.device_node) { - seq_printf(s, "%s\t\t\%s\n", chan->name, + seq_printf(s, "%s\t\t%s\n", chan->name, pl08x_state_str(chan->state)); } @@ -1898,7 +1898,7 @@ static int pl08x_debugfs_show(struct seq_file *s, void *data) seq_printf(s, "CHANNEL:\tSTATE:\n"); seq_printf(s, "--------\t------\n"); list_for_each_entry(chan, &pl08x->slave.channels, chan.device_node) { - seq_printf(s, "%s\t\t\%s\n", chan->name, + seq_printf(s, "%s\t\t%s\n", chan->name, pl08x_state_str(chan->state)); } -- cgit v1.2.1 From 9dc2c200a0551754f91e1b322dcb3d782cd709b2 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:33:06 +0000 Subject: ARM: PL08x: add comment explaining the flow control methods Explain the two flow control methods which the PL08x implements, along with the problem which peripheral flow control presents. This helps people understand why we are unable to use these DMA controllers with (eg) the MMCI. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 74fa5a0f1490..4b63fc39a6df 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -53,7 +53,23 @@ * * ASSUMES default (little) endianness for DMA transfers * - * Only DMAC flow control is implemented + * The PL08x has two flow control settings: + * - DMAC flow control: the transfer size defines the number of transfers + * which occur for the current LLI entry, and the DMAC raises TC at the + * end of every LLI entry. Observed behaviour shows the DMAC listening + * to both the BREQ and SREQ signals (contrary to documented), + * transferring data if either is active. The LBREQ and LSREQ signals + * are ignored. + * + * - Peripheral flow control: the transfer size is ignored (and should be + * zero). The data is transferred from the current LLI entry, until + * after the final transfer signalled by LBREQ or LSREQ. The DMAC + * will then move to the next LLI entry. + * + * Only the former works sanely with scatter lists, so we only implement + * the DMAC flow control method. However, peripherals which use the LBREQ + * and LSREQ signals (eg, MMCI) are unable to use this mode, which through + * these hardware restrictions prevents them from using scatter DMA. * * Global TODO: * - Break out common code from arch/arm/mach-s3c64xx and share -- cgit v1.2.1 From b05cd8f4c04a29eebfa65c45fabc78a02f16a782 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:33:26 +0000 Subject: ARM: PL08x: improve the announcement printk Include the revision number of the PL08x primecell in the boot-time printk to allow proper identification of the peripheral. Reformat the announcement printk format reflect what we do for other primecell drivers - generally "PLXXX revX at 0xNNNNNNNN irq X". Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 4b63fc39a6df..75ab4e47a153 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -98,13 +98,11 @@ /** * struct vendor_data - vendor-specific config parameters * for PL08x derivatives - * @name: the name of this specific variant * @channels: the number of channels available in this variant * @dualmaster: whether this version supports dual AHB masters * or not. */ struct vendor_data { - char *name; u8 channels; bool dualmaster; }; @@ -2024,7 +2022,7 @@ static int pl08x_probe(struct amba_device *adev, struct amba_id *id) writel(0x000000FF, pl08x->base + PL080_TC_CLEAR); ret = request_irq(adev->irq[0], pl08x_irq, IRQF_DISABLED, - vd->name, pl08x); + DRIVER_NAME, pl08x); if (ret) { dev_err(&adev->dev, "%s failed to request interrupt %d\n", __func__, adev->irq[0]); @@ -2095,8 +2093,9 @@ static int pl08x_probe(struct amba_device *adev, struct amba_id *id) amba_set_drvdata(adev, pl08x); init_pl08x_debugfs(pl08x); - dev_info(&pl08x->adev->dev, "ARM(R) %s DMA block initialized @%08x\n", - vd->name, adev->res.start); + dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n", + amba_part(adev), amba_rev(adev), + (unsigned long long)adev->res.start, adev->irq[0]); return 0; out_no_slave_reg: @@ -2123,13 +2122,11 @@ out_no_pl08x: /* PL080 has 8 channels and the PL080 have just 2 */ static struct vendor_data vendor_pl080 = { - .name = "PL080", .channels = 8, .dualmaster = true, }; static struct vendor_data vendor_pl081 = { - .name = "PL081", .channels = 2, .dualmaster = false, }; -- cgit v1.2.1 From 9c132992689d7d27a4e17545b6279db4e03c0943 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:33:47 +0000 Subject: ARM: PL08x: prefix hex numbers with 0x A driver which emits both decimal and hex numbers in its printk creates confusion as to what is what. Prefix hex numbers with 0x. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 75ab4e47a153..c61774a3630e 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -199,8 +199,8 @@ static void pl08x_set_cregs(struct pl08x_driver_data *pl08x, ; dev_vdbg(&pl08x->adev->dev, - "WRITE channel %d: csrc=%08x, cdst=%08x, " - "cctl=%08x, clli=%08x, ccfg=%08x\n", + "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " + "cctl=0x%08x, clli=0x%08x, ccfg=0x%08x\n", ch->id, ch->csrc, ch->cdst, @@ -731,7 +731,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, while (remainder) { dev_vdbg(&pl08x->adev->dev, "%s single byte LLIs for a transfer of " - "less than a bus width (remain %08x)\n", + "less than a bus width (remain 0x%08x)\n", __func__, remainder); cctl = pl08x_cctl_bits(cctl, 1, 1, 1); num_llis = @@ -747,7 +747,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, while ((mbus->addr) % (mbus->buswidth)) { dev_vdbg(&pl08x->adev->dev, "%s adjustment lli for less than bus width " - "(remain %08x)\n", + "(remain 0x%08x)\n", __func__, remainder); cctl = pl08x_cctl_bits(cctl, 1, 1, 1); num_llis = pl08x_fill_lli_for_desc @@ -865,7 +865,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, if (target_len != lli_len) { dev_vdbg(&pl08x->adev->dev, - "%s can't send what we want. Desired %08x, lli of %08x bytes in txd of %08x\n", + "%s can't send what we want. Desired 0x%08x, lli of 0x%08x bytes in txd of 0x%08x\n", __func__, target_len, lli_len, txd->len); } @@ -875,7 +875,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, tsize); dev_vdbg(&pl08x->adev->dev, - "%s fill lli with single lli chunk of size %08x (remainder %08x)\n", + "%s fill lli with single lli chunk of size 0x%08x (remainder 0x%08x)\n", __func__, lli_len, remainder); num_llis = pl08x_fill_lli_for_desc(pl08x, txd, num_llis, lli_len, cctl, @@ -894,7 +894,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, && (remainder); j++) { cctl = pl08x_cctl_bits(cctl, 1, 1, 1); dev_vdbg(&pl08x->adev->dev, - "%s align with boundary, single byte (remain %08x)\n", + "%s align with boundary, single byte (remain 0x%08x)\n", __func__, remainder); num_llis = pl08x_fill_lli_for_desc(pl08x, @@ -979,7 +979,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, for (i = 0; i < num_llis; i++) { dev_vdbg(&pl08x->adev->dev, - "lli %d @%p: csrc=%08x, cdst=%08x, cctl=%08x, clli=%08x\n", + "lli %d @%p: csrc=0x%08x, cdst=0x%08x, cctl=0x%08x, clli=0x%08x\n", i, &llis_va[i], llis_va[i].src, @@ -1289,7 +1289,7 @@ static void dma_set_runtime_config(struct dma_chan *chan, dev_dbg(&pl08x->adev->dev, "configured channel %s (%s) for %s, data width %d, " - "maxburst %d words, LE, CCTL=%08x, CCFG=%08x\n", + "maxburst %d words, LE, CCTL=0x%08x, CCFG=0x%08x\n", dma_chan_name(chan), plchan->name, (config->direction == DMA_FROM_DEVICE) ? "RX" : "TX", addr_width, -- cgit v1.2.1 From 730404ac1c47403af67420705980c99e90bf182f Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:34:07 +0000 Subject: ARM: PL08x: remove unnecessary includes We don't need to include linux/pci.h as we aren't a PCI driver. We aren't doing any processor specific functions, so asm/processor.h is not required. asm/cacheflush.h shouldn't be used, we have the DMA API for this. DMA interfaces aren't required as we're only implementing the dmaengine API and not a platform-private DMA API. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index c61774a3630e..d22d6280242d 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -77,21 +77,16 @@ #include #include #include -#include #include #include #include -#include #include +#include #include #include #include #include -#include -#include -#include -#include #define DRIVER_NAME "pl08xdmac" -- cgit v1.2.1 From ad0a3ad33c96cbba98ba62116771fb836c551e60 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:34:27 +0000 Subject: ARM: PL08x: remove unnecessary NULL and BUG checks The tasklet always is initialized with a non-NULL data argument. It is not possible for it to be called with a NULL data argument (unless something is very wrong in the tasklet code - in which case lots of stuff will break). Therefore, as plchan can never be NULL, remove this unnecessary BUG check. In pl08x_tasklet(), we've already dereferenced plchan->at, so it can't be NULL here. Remove this unnecessary BUG check. pl08x_fill_llis_for_desc() and pl08x_free_txd() are always called with a non-NULL txd argument - either as a consequence of the code paths or as a result of other checks already in place. We don't need to repeat the non-NULL check in these functions. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 21 --------------------- 1 file changed, 21 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index d22d6280242d..b721ed2e884d 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -623,11 +623,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, struct lli *llis_va; struct lli *llis_bus; - if (!txd) { - dev_err(&pl08x->adev->dev, "%s no descriptor\n", __func__); - return 0; - } - txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus); if (!txd->llis_va) { @@ -993,11 +988,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, static void pl08x_free_txd(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd) { - if (!txd) - dev_err(&pl08x->adev->dev, - "%s no descriptor to free\n", - __func__); - /* Free the LLI */ dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus); @@ -1633,9 +1623,6 @@ static void pl08x_tasklet(unsigned long data) struct pl08x_driver_data *pl08x = plchan->host; unsigned long flags; - if (!plchan) - BUG(); - spin_lock_irqsave(&plchan->lock, flags); if (plchan->at) { @@ -1655,14 +1642,6 @@ static void pl08x_tasklet(unsigned long data) if (callback) callback(callback_param); - /* - * Device callbacks should NOT clear - * the current transaction on the channel - * Linus: sometimes they should? - */ - if (!plchan->at) - BUG(); - /* * Free the descriptor if it's not for a device * using a circular buffer -- cgit v1.2.1 From b58b6b5bedf4d5da7a0cb2dce3b42d010c3aef03 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:34:48 +0000 Subject: ARM: PL08x: remove circular buffer support The driver already won't initialize a channel with a circular buffer; the check in pl08x_prep_channel_resources() sees to that. Remove circular buffer support for the time being. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 71 ++++++++++++++---------------------------------- 1 file changed, 20 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index b721ed2e884d..74b35910f295 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -927,39 +927,21 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, __func__, (u32) MAX_NUM_TSFR_LLIS); return 0; } + + llis_va = txd->llis_va; /* - * Decide whether this is a loop or a terminated transfer + * The final LLI terminates the LLI. */ - llis_va = txd->llis_va; - llis_bus = (struct lli *) txd->llis_bus; - - if (cd->circular_buffer) { - /* - * Loop the circular buffer so that the next element - * points back to the beginning of the LLI. - */ - llis_va[num_llis - 1].next = - (dma_addr_t)((unsigned int)&(llis_bus[0])); - } else { - /* - * On non-circular buffers, the final LLI terminates - * the LLI. - */ - llis_va[num_llis - 1].next = 0; - /* - * The final LLI element shall also fire an interrupt - */ - llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN; - } + llis_va[num_llis - 1].next = 0; + /* + * The final LLI element shall also fire an interrupt + */ + llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN; /* Now store the channel register values */ txd->csrc = llis_va[0].src; txd->cdst = llis_va[0].dst; - if (num_llis > 1) - txd->clli = llis_va[0].next; - else - txd->clli = 0; - + txd->clli = llis_va[0].next; txd->cctl = llis_va[0].cctl; /* ccfg will be set at physical channel allocation time */ @@ -1334,19 +1316,7 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, spin_lock_irqsave(&plchan->lock, plchan->lockflags); - /* - * If this device is not using a circular buffer then - * queue this new descriptor for transfer. - * The descriptor for a circular buffer continues - * to be used until the channel is freed. - */ - if (txd->cd->circular_buffer) - dev_err(&pl08x->adev->dev, - "%s attempting to queue a circular buffer\n", - __func__); - else - list_add_tail(&txd->node, - &plchan->desc_list); + list_add_tail(&txd->node, &plchan->desc_list); /* * See if we already have a physical channel allocated, @@ -1643,18 +1613,10 @@ static void pl08x_tasklet(unsigned long data) callback(callback_param); /* - * Free the descriptor if it's not for a device - * using a circular buffer - */ - if (!plchan->at->cd->circular_buffer) { - pl08x_free_txd(pl08x, plchan->at); - plchan->at = NULL; - } - /* - * else descriptor for circular - * buffers only freed when - * client has disabled dma + * Free the descriptor */ + pl08x_free_txd(pl08x, plchan->at); + plchan->at = NULL; } /* * If a new descriptor is queued, set it up @@ -1799,6 +1761,13 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, return -ENOMEM; } } + if (chan->cd->circular_buffer) { + dev_err(&pl08x->adev->dev, + "channel %s: circular buffers not supported\n", + chan->name); + kfree(chan); + continue; + } dev_info(&pl08x->adev->dev, "initialize virtual channel \"%s\"\n", chan->name); -- cgit v1.2.1 From f96ca9ec27159c1c8718aa8d0ed03051cd12e884 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:35:08 +0000 Subject: ARM: PL08x: constify vendor data pointers We should never modify the vendor data structure so make it const. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 74b35910f295..707fa081c9fa 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -132,7 +132,7 @@ struct pl08x_driver_data { struct dma_device memcpy; void __iomem *base; struct amba_device *adev; - struct vendor_data *vd; + const struct vendor_data *vd; struct pl08x_platform_data *pd; struct pl08x_phy_chan *phy_chans; struct dma_pool *pool; @@ -1891,7 +1891,7 @@ static inline void init_pl08x_debugfs(struct pl08x_driver_data *pl08x) static int pl08x_probe(struct amba_device *adev, struct amba_id *id) { struct pl08x_driver_data *pl08x; - struct vendor_data *vd = id->data; + const struct vendor_data *vd = id->data; int ret = 0; int i; -- cgit v1.2.1 From 7cb72ad959b16ac594118977b7954a7d2ec7a052 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:35:28 +0000 Subject: ARM: PL08x: avoid 'void *' struct fields when we can type them properly Avoid using 'void *' struct fields when the structs are not defined in linux/amba/pl08x.h - instead, forward declare the struct names, and use these instead. This ensures we have proper typechecking. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 707fa081c9fa..fada97873d7d 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -107,7 +107,7 @@ struct vendor_data { * An LLI struct - see PL08x TRM. Note that next uses bit[0] as a bus bit, * start & end do not - their bus bit info is in cctl. */ -struct lli { +struct pl08x_lli { dma_addr_t src; dma_addr_t dst; dma_addr_t next; @@ -160,7 +160,7 @@ struct pl08x_driver_data { /* Maximum times we call dma_pool_alloc on this pool without freeing */ #define PL08X_MAX_ALLOCS 0x40 -#define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct lli)) +#define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct pl08x_lli)) #define PL08X_ALIGN 8 static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan) @@ -354,8 +354,8 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) * currently active transaction. */ if (ch && txd) { - struct lli *llis_va = txd->llis_va; - struct lli *llis_bus = (struct lli *) txd->llis_bus; + struct pl08x_lli *llis_va = txd->llis_va; + struct pl08x_lli *llis_bus = (struct pl08x_lli *) txd->llis_bus; u32 clli = readl(ch->base + PL080_CH_LLI); /* First get the bytes in the current active LLI */ @@ -558,8 +558,8 @@ static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd, int num_llis, int len, u32 cctl, u32 *remainder) { - struct lli *llis_va = txd->llis_va; - struct lli *llis_bus = (struct lli *) txd->llis_bus; + struct pl08x_lli *llis_va = txd->llis_va; + struct pl08x_lli *llis_bus = (struct pl08x_lli *) txd->llis_bus; BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS); @@ -620,8 +620,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, u32 cctl; int max_bytes_per_lli; int total_bytes = 0; - struct lli *llis_va; - struct lli *llis_bus; + struct pl08x_lli *llis_va; + struct pl08x_lli *llis_bus; txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus); -- cgit v1.2.1 From ac3cd20df9d74bb205bb34f69407477a884ff8a3 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:35:49 +0000 Subject: ARM: PL08x: consolidate common txd initialization Consolidate code which allocates and initializes txds. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index fada97873d7d..d47255ee9504 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1363,6 +1363,18 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, return 0; } +static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan) +{ + struct pl08x_txd *txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT); + + if (txd) { + dma_async_tx_descriptor_init(&txd->tx, &plchan->chan); + txd->tx.tx_submit = pl08x_tx_submit; + INIT_LIST_HEAD(&txd->node); + } + return txd; +} + /* * Initialize a descriptor to be used by memcpy submit */ @@ -1375,14 +1387,13 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( struct pl08x_txd *txd; int ret; - txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT); + txd = pl08x_get_txd(plchan); if (!txd) { dev_err(&pl08x->adev->dev, "%s no memory for descriptor\n", __func__); return NULL; } - dma_async_tx_descriptor_init(&txd->tx, chan); txd->direction = DMA_NONE; txd->srcbus.addr = src; txd->dstbus.addr = dest; @@ -1391,12 +1402,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( txd->cd = &pl08x->pd->memcpy_channel; /* Both to be incremented or the code will break */ txd->cd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; - txd->tx.tx_submit = pl08x_tx_submit; - txd->tx.callback = NULL; - txd->tx.callback_param = NULL; txd->len = len; - INIT_LIST_HEAD(&txd->node); ret = pl08x_prep_channel_resources(plchan, txd); if (ret) return NULL; @@ -1430,14 +1437,12 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n", __func__, sgl->length, plchan->name); - txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT); + txd = pl08x_get_txd(plchan); if (!txd) { dev_err(&pl08x->adev->dev, "%s no txd\n", __func__); return NULL; } - dma_async_tx_descriptor_init(&txd->tx, chan); - if (direction != plchan->runtime_direction) dev_err(&pl08x->adev->dev, "%s DMA setup does not match " "the direction configured for the PrimeCell\n", @@ -1467,11 +1472,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( return NULL; } txd->cd = plchan->cd; - txd->tx.tx_submit = pl08x_tx_submit; - txd->tx.callback = NULL; - txd->tx.callback_param = NULL; txd->len = sgl->length; - INIT_LIST_HEAD(&txd->node); ret = pl08x_prep_channel_resources(plchan, txd); if (ret) -- cgit v1.2.1 From 8c8cc2b1040f51a2f89724edbf976774128339eb Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:36:09 +0000 Subject: ARM: PL08x: consolidate physical channel release code Consolidate duplicated channel release code into release_phy_channel() Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index d47255ee9504..e8967ff44fc2 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1058,6 +1058,18 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan, return 0; } +static void release_phy_channel(struct pl08x_dma_chan *plchan) +{ + struct pl08x_driver_data *pl08x = plchan->host; + + if ((plchan->phychan->signal >= 0) && pl08x->pd->put_signal) { + pl08x->pd->put_signal(plchan); + plchan->phychan->signal = -1; + } + pl08x_put_phy_channel(pl08x, plchan->phychan); + plchan->phychan = NULL; +} + static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) { struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan); @@ -1522,13 +1534,7 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, * Mark physical channel as free and free any slave * signal */ - if ((plchan->phychan->signal >= 0) && - pl08x->pd->put_signal) { - pl08x->pd->put_signal(plchan); - plchan->phychan->signal = -1; - } - pl08x_put_phy_channel(pl08x, plchan->phychan); - plchan->phychan = NULL; + release_phy_channel(plchan); } /* Dequeue jobs and free LLIs */ if (plchan->at) { @@ -1590,7 +1596,6 @@ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) static void pl08x_tasklet(unsigned long data) { struct pl08x_dma_chan *plchan = (struct pl08x_dma_chan *) data; - struct pl08x_phy_chan *phychan = plchan->phychan; struct pl08x_driver_data *pl08x = plchan->host; unsigned long flags; @@ -1642,12 +1647,7 @@ static void pl08x_tasklet(unsigned long data) * No more jobs, so free up the physical channel * Free any allocated signal on slave transfers too */ - if ((phychan->signal >= 0) && pl08x->pd->put_signal) { - pl08x->pd->put_signal(plchan); - phychan->signal = -1; - } - pl08x_put_phy_channel(pl08x, phychan); - plchan->phychan = NULL; + release_phy_channel(plchan); plchan->state = PL08X_CHAN_IDLE; /* -- cgit v1.2.1 From 19386b3234fdbe4d33492574d83e63a8dace18d3 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:36:29 +0000 Subject: ARM: PL08x: ensure loops use cpu_relax() Tight loops should use cpu_relax() to allow CPUs to reduce power consumption while waiting for events. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index e8967ff44fc2..78c84b3f903d 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -191,7 +191,7 @@ static void pl08x_set_cregs(struct pl08x_driver_data *pl08x, { /* Wait for channel inactive */ while (pl08x_phy_channel_busy(ch)) - ; + cpu_relax(); dev_vdbg(&pl08x->adev->dev, "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " @@ -255,7 +255,7 @@ static void pl08x_enable_phy_chan(struct pl08x_driver_data *pl08x, * Do not access config register until channel shows as disabled */ while (readl(pl08x->base + PL080_EN_CHAN) & (1 << ch->id)) - ; + cpu_relax(); /* * Do not access config register until channel shows as inactive @@ -288,7 +288,7 @@ static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch) /* Wait for channel inactive */ while (pl08x_phy_channel_busy(ch)) - ; + cpu_relax(); } static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch) -- cgit v1.2.1 From 4c0df6a3ce8eb947647c7ed2640d0172936d8ef3 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:36:50 +0000 Subject: ARM: PL08x: don't assume that the LLI pointer has the bus bit clear We only want use the address of the LLI pointer when locating the corresponding structure in memory, so clear the master bus selection bit. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 78c84b3f903d..1081165d01a3 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -356,7 +356,7 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) if (ch && txd) { struct pl08x_lli *llis_va = txd->llis_va; struct pl08x_lli *llis_bus = (struct pl08x_lli *) txd->llis_bus; - u32 clli = readl(ch->base + PL080_CH_LLI); + u32 clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2; /* First get the bytes in the current active LLI */ bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL)); -- cgit v1.2.1 From 56b618820c92a5efa2145fbbac373fffbb024a94 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:37:10 +0000 Subject: ARM: PL08x: don't try to use llis_bus as a pointer llis_bus is the DMA address of the LLI array. Casting it to be a pointer just to be able to use pointer arithmetic on it is not nice. We can trivially deal with the places where we do arithmetic on it, and it's actually cleaner this way. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 1081165d01a3..760b71eec84c 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -559,7 +559,7 @@ static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, u32 cctl, u32 *remainder) { struct pl08x_lli *llis_va = txd->llis_va; - struct pl08x_lli *llis_bus = (struct pl08x_lli *) txd->llis_bus; + dma_addr_t llis_bus = txd->llis_bus; BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS); @@ -576,8 +576,7 @@ static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, * memory. So we don't manipulate this bit currently. */ - llis_va[num_llis].next = - (dma_addr_t)((u32) &(llis_bus[num_llis + 1])); + llis_va[num_llis].next = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli); if (cctl & PL080_CONTROL_SRC_INCR) txd->srcbus.addr += len; @@ -621,7 +620,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, int max_bytes_per_lli; int total_bytes = 0; struct pl08x_lli *llis_va; - struct pl08x_lli *llis_bus; txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus); @@ -971,8 +969,7 @@ static void pl08x_free_txd(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd) { /* Free the LLI */ - dma_pool_free(pl08x->pool, txd->llis_va, - txd->llis_bus); + dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus); pl08x->pool_ctr--; -- cgit v1.2.1 From cace658572ba5d1075f3891e823130a66f3e330f Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:37:31 +0000 Subject: ARM: PL08x: use 'size_t' for lengths Use size_t for variables denoting lengths throughout, and use the 'z' qualifier for printing the value. For safety, add a BUG_ON() in pl08x_fill_lli_for_desc() to catch the remainder potentially becoming negative. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 40 +++++++++++++++++----------------------- 1 file changed, 17 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 760b71eec84c..fa78697790c0 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -342,7 +342,7 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) struct pl08x_txd *txdi = NULL; struct pl08x_txd *txd; unsigned long flags; - u32 bytes = 0; + size_t bytes = 0; spin_lock_irqsave(&plchan->lock, flags); @@ -470,7 +470,7 @@ static inline unsigned int pl08x_get_bytes_for_cctl(unsigned int coded) } static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth, - u32 tsize) + size_t tsize) { u32 retbits = cctl; @@ -583,6 +583,8 @@ static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, if (cctl & PL080_CONTROL_DST_INCR) txd->dstbus.addr += len; + BUG_ON(*remainder < len); + *remainder -= len; return num_llis + 1; @@ -591,7 +593,7 @@ static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, /* * Return number of bytes to fill to boundary, or len */ -static inline u32 pl08x_pre_boundary(u32 addr, u32 len) +static inline size_t pl08x_pre_boundary(u32 addr, size_t len) { u32 boundary; @@ -614,11 +616,11 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, { struct pl08x_channel_data *cd = txd->cd; struct pl08x_bus_data *mbus, *sbus; - u32 remainder; + size_t remainder; int num_llis = 0; u32 cctl; - int max_bytes_per_lli; - int total_bytes = 0; + size_t max_bytes_per_lli; + size_t total_bytes = 0; struct pl08x_lli *llis_va; txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, @@ -686,13 +688,13 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, max_bytes_per_lli = min(txd->srcbus.buswidth, txd->dstbus.buswidth) * PL080_CONTROL_TRANSFER_SIZE_MASK; dev_vdbg(&pl08x->adev->dev, - "%s max bytes per lli = %d\n", + "%s max bytes per lli = %zu\n", __func__, max_bytes_per_lli); /* We need to count this down to zero */ remainder = txd->len; dev_vdbg(&pl08x->adev->dev, - "%s remainder = %d\n", + "%s remainder = %zu\n", __func__, remainder); /* @@ -760,9 +762,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * width left */ while (remainder > (mbus->buswidth - 1)) { - int lli_len, target_len; - int tsize; - int odd_bytes; + size_t lli_len, target_len, tsize, odd_bytes; /* * If enough left try to send max possible, @@ -805,7 +805,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, if (lli_len <= 0) { dev_err(&pl08x->adev->dev, - "%s lli_len is %d, <= 0\n", + "%s lli_len is %zu, <= 0\n", __func__, lli_len); return 0; } @@ -853,7 +853,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, if (target_len != lli_len) { dev_vdbg(&pl08x->adev->dev, - "%s can't send what we want. Desired 0x%08x, lli of 0x%08x bytes in txd of 0x%08x\n", + "%s can't send what we want. Desired 0x%08zx, lli of 0x%08zx bytes in txd of 0x%08zx\n", __func__, target_len, lli_len, txd->len); } @@ -863,7 +863,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, tsize); dev_vdbg(&pl08x->adev->dev, - "%s fill lli with single lli chunk of size 0x%08x (remainder 0x%08x)\n", + "%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n", __func__, lli_len, remainder); num_llis = pl08x_fill_lli_for_desc(pl08x, txd, num_llis, lli_len, cctl, @@ -882,7 +882,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, && (remainder); j++) { cctl = pl08x_cctl_bits(cctl, 1, 1, 1); dev_vdbg(&pl08x->adev->dev, - "%s align with boundary, single byte (remain 0x%08x)\n", + "%s align with boundary, single byte (remain 0x%08zx)\n", __func__, remainder); num_llis = pl08x_fill_lli_for_desc(pl08x, @@ -896,16 +896,10 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* * Send any odd bytes */ - if (remainder < 0) { - dev_err(&pl08x->adev->dev, "%s remainder not fitted 0x%08x bytes\n", - __func__, remainder); - return 0; - } - while (remainder) { cctl = pl08x_cctl_bits(cctl, 1, 1, 1); dev_vdbg(&pl08x->adev->dev, - "%s align with boundary, single odd byte (remain %d)\n", + "%s align with boundary, single odd byte (remain %zu)\n", __func__, remainder); num_llis = pl08x_fill_lli_for_desc(pl08x, txd, num_llis, 1, cctl, &remainder); @@ -914,7 +908,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, } if (total_bytes != txd->len) { dev_err(&pl08x->adev->dev, - "%s size of encoded lli:s don't match total txd, transferred 0x%08x from size 0x%08x\n", + "%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n", __func__, total_bytes, txd->len); return 0; } -- cgit v1.2.1 From e25761d72c80751c8741f5f93abab14232eef347 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:37:52 +0000 Subject: ARM: PL08x: use 'u32' for LLI structure members, not dma_addr_t Use 'u32' for the LLI structure members, which are defined by hardware to be 32-bit. dma_addr_t is much more vague about its actual size. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index fa78697790c0..a389df501f70 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -105,12 +105,13 @@ struct vendor_data { /* * PL08X private data structures * An LLI struct - see PL08x TRM. Note that next uses bit[0] as a bus bit, - * start & end do not - their bus bit info is in cctl. + * start & end do not - their bus bit info is in cctl. Also note that these + * are fixed 32-bit quantities. */ struct pl08x_lli { - dma_addr_t src; - dma_addr_t dst; - dma_addr_t next; + u32 src; + u32 dst; + u32 next; u32 cctl; }; -- cgit v1.2.1 From bfddfb45056fa95a778f0baf463ac0f9fc926d5c Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:38:12 +0000 Subject: ARM: PL08x: rename lli.next to lli.lli The LLI pointer in the documentation is placed into the LLI register, so name it LLI rather than 'next'. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index a389df501f70..a897315261bc 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -111,7 +111,7 @@ struct vendor_data { struct pl08x_lli { u32 src; u32 dst; - u32 next; + u32 lli; u32 cctl; }; @@ -375,7 +375,7 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) /* * A LLI pointer of 0 terminates the LLI list */ - clli = llis_va[i].next; + clli = llis_va[i].lli; i++; } } @@ -577,7 +577,7 @@ static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, * memory. So we don't manipulate this bit currently. */ - llis_va[num_llis].next = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli); + llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli); if (cctl & PL080_CONTROL_SRC_INCR) txd->srcbus.addr += len; @@ -925,7 +925,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* * The final LLI terminates the LLI. */ - llis_va[num_llis - 1].next = 0; + llis_va[num_llis - 1].lli = 0; /* * The final LLI element shall also fire an interrupt */ @@ -934,7 +934,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* Now store the channel register values */ txd->csrc = llis_va[0].src; txd->cdst = llis_va[0].dst; - txd->clli = llis_va[0].next; + txd->clli = llis_va[0].lli; txd->cctl = llis_va[0].cctl; /* ccfg will be set at physical channel allocation time */ @@ -950,7 +950,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, llis_va[i].src, llis_va[i].dst, llis_va[i].cctl, - llis_va[i].next + llis_va[i].lli ); } } -- cgit v1.2.1 From db9f136a60c8727c8e1c9c4f2494821caebf5a7b Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:38:32 +0000 Subject: ARM: PL08x: clean up LLI lookup As the LLI list is an array, we can use maths to locate which LLI index we're currently at, and then sum up the remaining LLI entries until we reach the end of the list. This makes the code much easier to read, and much less susceptible to falling off the end of the array. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 37 ++++++++++++++++++++----------------- 1 file changed, 20 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index a897315261bc..202c9e2d2e9e 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -340,53 +340,56 @@ static inline u32 get_bytes_in_cctl(u32 cctl) static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) { struct pl08x_phy_chan *ch; - struct pl08x_txd *txdi = NULL; struct pl08x_txd *txd; unsigned long flags; size_t bytes = 0; spin_lock_irqsave(&plchan->lock, flags); - ch = plchan->phychan; txd = plchan->at; /* - * Next follow the LLIs to get the number of pending bytes in the - * currently active transaction. + * Follow the LLIs to get the number of remaining + * bytes in the currently active transaction. */ if (ch && txd) { - struct pl08x_lli *llis_va = txd->llis_va; - struct pl08x_lli *llis_bus = (struct pl08x_lli *) txd->llis_bus; u32 clli = readl(ch->base + PL080_CH_LLI) & ~PL080_LLI_LM_AHB2; - /* First get the bytes in the current active LLI */ + /* First get the remaining bytes in the active transfer */ bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL)); if (clli) { - int i = 0; + struct pl08x_lli *llis_va = txd->llis_va; + dma_addr_t llis_bus = txd->llis_bus; + int index; - /* Forward to the LLI pointed to by clli */ - while ((clli != (u32) &(llis_bus[i])) && - (i < MAX_NUM_TSFR_LLIS)) - i++; + BUG_ON(clli < llis_bus || clli >= llis_bus + + sizeof(struct pl08x_lli) * MAX_NUM_TSFR_LLIS); + + /* + * Locate the next LLI - as this is an array, + * it's simple maths to find. + */ + index = (clli - llis_bus) / sizeof(struct pl08x_lli); + + for (; index < MAX_NUM_TSFR_LLIS; index++) { + bytes += get_bytes_in_cctl(llis_va[index].cctl); - while (clli) { - bytes += get_bytes_in_cctl(llis_va[i].cctl); /* * A LLI pointer of 0 terminates the LLI list */ - clli = llis_va[i].lli; - i++; + if (!llis_va[index].lli) + break; } } } /* Sum up all queued transactions */ if (!list_empty(&plchan->desc_list)) { + struct pl08x_txd *txdi; list_for_each_entry(txdi, &plchan->desc_list, node) { bytes += txdi->len; } - } spin_unlock_irqrestore(&plchan->lock, flags); -- cgit v1.2.1 From c885bee4f10323a1ff3f19e1aa2aa6f4e7f89dd8 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:38:52 +0000 Subject: ARM: PL08x: combine functions to start DMA into one function There is no need for pl08x_config_phychan_for_txd(), pl08x_set_cregs() and pl08x_enable_phy_chan() to be separate - they are always called in sequence. Combine them into one function. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 98 +++++++++++++++++++----------------------------- 1 file changed, 38 insertions(+), 60 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 202c9e2d2e9e..c025a4b4bae4 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -185,37 +185,17 @@ static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch) /* * Set the initial DMA register values i.e. those for the first LLI * The next LLI pointer and the configuration interrupt bit have - * been set when the LLIs were constructed + * been set when the LLIs were constructed. Poke them into the hardware + * and start the transfer. */ -static void pl08x_set_cregs(struct pl08x_driver_data *pl08x, - struct pl08x_phy_chan *ch) +static void pl08x_start_txd(struct pl08x_dma_chan *plchan, + struct pl08x_txd *txd) { - /* Wait for channel inactive */ - while (pl08x_phy_channel_busy(ch)) - cpu_relax(); - - dev_vdbg(&pl08x->adev->dev, - "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " - "cctl=0x%08x, clli=0x%08x, ccfg=0x%08x\n", - ch->id, - ch->csrc, - ch->cdst, - ch->cctl, - ch->clli, - ch->ccfg); - - writel(ch->csrc, ch->base + PL080_CH_SRC_ADDR); - writel(ch->cdst, ch->base + PL080_CH_DST_ADDR); - writel(ch->clli, ch->base + PL080_CH_LLI); - writel(ch->cctl, ch->base + PL080_CH_CONTROL); - writel(ch->ccfg, ch->base + PL080_CH_CONFIG); -} - -static inline void pl08x_config_phychan_for_txd(struct pl08x_dma_chan *plchan) -{ - struct pl08x_channel_data *cd = plchan->cd; + struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_phy_chan *phychan = plchan->phychan; - struct pl08x_txd *txd = plchan->at; + u32 val; + + plchan->at = txd; /* Copy the basic control register calculated at transfer config */ phychan->csrc = txd->csrc; @@ -224,7 +204,7 @@ static inline void pl08x_config_phychan_for_txd(struct pl08x_dma_chan *plchan) phychan->cctl = txd->cctl; /* Assign the signal to the proper control registers */ - phychan->ccfg = cd->ccfg; + phychan->ccfg = plchan->cd->ccfg; phychan->ccfg &= ~PL080_CONFIG_SRC_SEL_MASK; phychan->ccfg &= ~PL080_CONFIG_DST_SEL_MASK; /* If it wasn't set from AMBA, ignore it */ @@ -240,32 +220,38 @@ static inline void pl08x_config_phychan_for_txd(struct pl08x_dma_chan *plchan) phychan->ccfg |= PL080_CONFIG_ERR_IRQ_MASK; /* Always enable terminal interrupts */ phychan->ccfg |= PL080_CONFIG_TC_IRQ_MASK; -} -/* - * Enable the DMA channel - * Assumes all other configuration bits have been set - * as desired before this code is called - */ -static void pl08x_enable_phy_chan(struct pl08x_driver_data *pl08x, - struct pl08x_phy_chan *ch) -{ - u32 val; + /* Wait for channel inactive */ + while (pl08x_phy_channel_busy(phychan)) + cpu_relax(); - /* - * Do not access config register until channel shows as disabled - */ - while (readl(pl08x->base + PL080_EN_CHAN) & (1 << ch->id)) + dev_vdbg(&pl08x->adev->dev, + "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " + "cctl=0x%08x, clli=0x%08x, ccfg=0x%08x\n", + phychan->id, + phychan->csrc, + phychan->cdst, + phychan->cctl, + phychan->clli, + phychan->ccfg); + + writel(phychan->csrc, phychan->base + PL080_CH_SRC_ADDR); + writel(phychan->cdst, phychan->base + PL080_CH_DST_ADDR); + writel(phychan->clli, phychan->base + PL080_CH_LLI); + writel(phychan->cctl, phychan->base + PL080_CH_CONTROL); + writel(phychan->ccfg, phychan->base + PL080_CH_CONFIG); + + /* Enable the DMA channel */ + /* Do not access config register until channel shows as disabled */ + while (readl(pl08x->base + PL080_EN_CHAN) & (1 << phychan->id)) cpu_relax(); - /* - * Do not access config register until channel shows as inactive - */ - val = readl(ch->base + PL080_CH_CONFIG); + /* Do not access config register until channel shows as inactive */ + val = readl(phychan->base + PL080_CH_CONFIG); while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE)) - val = readl(ch->base + PL080_CH_CONFIG); + val = readl(phychan->base + PL080_CH_CONFIG); - writel(val | PL080_CONFIG_ENABLE, ch->base + PL080_CH_CONFIG); + writel(val | PL080_CONFIG_ENABLE, phychan->base + PL080_CH_CONFIG); } /* @@ -1278,7 +1264,6 @@ static void dma_set_runtime_config(struct dma_chan *chan, static void pl08x_issue_pending(struct dma_chan *chan) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); - struct pl08x_driver_data *pl08x = plchan->host; unsigned long flags; spin_lock_irqsave(&plchan->lock, flags); @@ -1296,13 +1281,9 @@ static void pl08x_issue_pending(struct dma_chan *chan) struct pl08x_txd, node); list_del(&next->node); - plchan->at = next; plchan->state = PL08X_CHAN_RUNNING; - /* Configure the physical channel for the active txd */ - pl08x_config_phychan_for_txd(plchan); - pl08x_set_cregs(pl08x, plchan->phychan); - pl08x_enable_phy_chan(pl08x, plchan->phychan); + pl08x_start_txd(plchan, next); } spin_unlock_irqrestore(&plchan->lock, flags); @@ -1630,11 +1611,8 @@ static void pl08x_tasklet(unsigned long data) struct pl08x_txd, node); list_del(&next->node); - plchan->at = next; - /* Configure the physical channel for the next txd */ - pl08x_config_phychan_for_txd(plchan); - pl08x_set_cregs(pl08x, plchan->phychan); - pl08x_enable_phy_chan(pl08x, plchan->phychan); + + pl08x_start_txd(plchan, next); } else { struct pl08x_dma_chan *waiting = NULL; -- cgit v1.2.1 From 19524d77ec34faf58d313ba34fb755ef6e159216 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:39:13 +0000 Subject: ARM: PL08x: avoid duplicating registers in txd and phychan structures As we now have all the code accessing the phychan {csrc,cdst,clli,cctl, ccfg} members in one function, there's no point storing the data into the struct. Get rid of the struct members. Re-order the register dump in the dev_dbg() to reflect the order we write the registers to the DMA device. The txd {csrc,cdst,clli,cctl} values are duplicates of the lli[0] values, so there's no point duplicating these either. Program the DMAC registers directly from the lli[0] values. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 57 ++++++++++++++++-------------------------------- 1 file changed, 19 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index c025a4b4bae4..a1a18bde6b7f 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -193,33 +193,25 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, { struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_phy_chan *phychan = plchan->phychan; - u32 val; + struct pl08x_lli *lli = &txd->llis_va[0]; + u32 val, ccfg; plchan->at = txd; - /* Copy the basic control register calculated at transfer config */ - phychan->csrc = txd->csrc; - phychan->cdst = txd->cdst; - phychan->clli = txd->clli; - phychan->cctl = txd->cctl; - /* Assign the signal to the proper control registers */ - phychan->ccfg = plchan->cd->ccfg; - phychan->ccfg &= ~PL080_CONFIG_SRC_SEL_MASK; - phychan->ccfg &= ~PL080_CONFIG_DST_SEL_MASK; + ccfg = plchan->cd->ccfg; + ccfg &= ~(PL080_CONFIG_SRC_SEL_MASK | PL080_CONFIG_DST_SEL_MASK); + /* If it wasn't set from AMBA, ignore it */ if (txd->direction == DMA_TO_DEVICE) /* Select signal as destination */ - phychan->ccfg |= - (phychan->signal << PL080_CONFIG_DST_SEL_SHIFT); + ccfg |= phychan->signal << PL080_CONFIG_DST_SEL_SHIFT; else if (txd->direction == DMA_FROM_DEVICE) /* Select signal as source */ - phychan->ccfg |= - (phychan->signal << PL080_CONFIG_SRC_SEL_SHIFT); - /* Always enable error interrupts */ - phychan->ccfg |= PL080_CONFIG_ERR_IRQ_MASK; - /* Always enable terminal interrupts */ - phychan->ccfg |= PL080_CONFIG_TC_IRQ_MASK; + ccfg |= phychan->signal << PL080_CONFIG_SRC_SEL_SHIFT; + + /* Always enable error and terminal interrupts */ + ccfg |= PL080_CONFIG_ERR_IRQ_MASK | PL080_CONFIG_TC_IRQ_MASK; /* Wait for channel inactive */ while (pl08x_phy_channel_busy(phychan)) @@ -227,19 +219,15 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, dev_vdbg(&pl08x->adev->dev, "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " - "cctl=0x%08x, clli=0x%08x, ccfg=0x%08x\n", - phychan->id, - phychan->csrc, - phychan->cdst, - phychan->cctl, - phychan->clli, - phychan->ccfg); - - writel(phychan->csrc, phychan->base + PL080_CH_SRC_ADDR); - writel(phychan->cdst, phychan->base + PL080_CH_DST_ADDR); - writel(phychan->clli, phychan->base + PL080_CH_LLI); - writel(phychan->cctl, phychan->base + PL080_CH_CONTROL); - writel(phychan->ccfg, phychan->base + PL080_CH_CONFIG); + "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n", + phychan->id, lli->src, lli->dst, lli->lli, lli->cctl, + ccfg); + + writel(lli->src, phychan->base + PL080_CH_SRC_ADDR); + writel(lli->dst, phychan->base + PL080_CH_DST_ADDR); + writel(lli->lli, phychan->base + PL080_CH_LLI); + writel(lli->cctl, phychan->base + PL080_CH_CONTROL); + writel(ccfg, phychan->base + PL080_CH_CONFIG); /* Enable the DMA channel */ /* Do not access config register until channel shows as disabled */ @@ -920,13 +908,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, */ llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN; - /* Now store the channel register values */ - txd->csrc = llis_va[0].src; - txd->cdst = llis_va[0].dst; - txd->clli = llis_va[0].lli; - txd->cctl = llis_va[0].cctl; - /* ccfg will be set at physical channel allocation time */ - #ifdef VERBOSE_DEBUG { int i; -- cgit v1.2.1 From 4983a04fd2562986360b646b378f267308bc22c0 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:39:33 +0000 Subject: ARM: PL08x: move ccfg into txd structure The ccfg register is used to configure the channel parameters - the type and direction of transfer, the flow control signal and IRQ mask enables. The type and direction of transfer is known in the relevent prep_* function where a txd is created. The IRQ mask enables are always set, and the flow control signals are always set when we start processing a txd according to phychan->signal. If we store the ccfg value in the txd structure, we can avoid modifying platform data - and even having it in platform data at all. So, remove it from platform data too. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index a1a18bde6b7f..75f9e2d4b032 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -194,15 +194,11 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_phy_chan *phychan = plchan->phychan; struct pl08x_lli *lli = &txd->llis_va[0]; - u32 val, ccfg; + u32 val, ccfg = txd->ccfg; plchan->at = txd; - /* Assign the signal to the proper control registers */ - ccfg = plchan->cd->ccfg; - ccfg &= ~(PL080_CONFIG_SRC_SEL_MASK | PL080_CONFIG_DST_SEL_MASK); - - /* If it wasn't set from AMBA, ignore it */ + /* Assign the flow control signal to this channel */ if (txd->direction == DMA_TO_DEVICE) /* Select signal as destination */ ccfg |= phychan->signal << PL080_CONFIG_DST_SEL_SHIFT; @@ -210,9 +206,6 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, /* Select signal as source */ ccfg |= phychan->signal << PL080_CONFIG_SRC_SEL_SHIFT; - /* Always enable error and terminal interrupts */ - ccfg |= PL080_CONFIG_ERR_IRQ_MASK | PL080_CONFIG_TC_IRQ_MASK; - /* Wait for channel inactive */ while (pl08x_phy_channel_busy(phychan)) cpu_relax(); @@ -1161,8 +1154,6 @@ static void dma_set_runtime_config(struct dma_chan *chan, enum dma_slave_buswidth addr_width; u32 maxburst; u32 cctl = 0; - /* Mask out all except src and dst channel */ - u32 ccfg = cd->ccfg & 0x000003DEU; int i; /* Transfer direction */ @@ -1170,13 +1161,11 @@ static void dma_set_runtime_config(struct dma_chan *chan, if (config->direction == DMA_TO_DEVICE) { plchan->runtime_addr = config->dst_addr; cctl |= PL080_CONTROL_SRC_INCR; - ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; addr_width = config->dst_addr_width; maxburst = config->dst_maxburst; } else if (config->direction == DMA_FROM_DEVICE) { plchan->runtime_addr = config->src_addr; cctl |= PL080_CONTROL_DST_INCR; - ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; addr_width = config->src_addr_width; maxburst = config->src_maxburst; } else { @@ -1226,16 +1215,15 @@ static void dma_set_runtime_config(struct dma_chan *chan, /* Modify the default channel data to fit PrimeCell request */ cd->cctl = cctl; - cd->ccfg = ccfg; dev_dbg(&pl08x->adev->dev, "configured channel %s (%s) for %s, data width %d, " - "maxburst %d words, LE, CCTL=0x%08x, CCFG=0x%08x\n", + "maxburst %d words, LE, CCTL=0x%08x\n", dma_chan_name(chan), plchan->name, (config->direction == DMA_FROM_DEVICE) ? "RX" : "TX", addr_width, maxburst, - cctl, ccfg); + cctl); } /* @@ -1340,6 +1328,10 @@ static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan) dma_async_tx_descriptor_init(&txd->tx, &plchan->chan); txd->tx.tx_submit = pl08x_tx_submit; INIT_LIST_HEAD(&txd->node); + + /* Always enable error and terminal interrupts */ + txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK | + PL080_CONFIG_TC_IRQ_MASK; } return txd; } @@ -1369,6 +1361,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( /* Set platform data for m2m */ txd->cd = &pl08x->pd->memcpy_channel; + txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; + /* Both to be incremented or the code will break */ txd->cd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; txd->len = len; @@ -1424,12 +1418,14 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( */ txd->direction = direction; if (direction == DMA_TO_DEVICE) { + txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->srcbus.addr = sgl->dma_address; if (plchan->runtime_addr) txd->dstbus.addr = plchan->runtime_addr; else txd->dstbus.addr = plchan->cd->addr; } else if (direction == DMA_FROM_DEVICE) { + txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; if (plchan->runtime_addr) txd->srcbus.addr = plchan->runtime_addr; else -- cgit v1.2.1 From 09b3c323332206aaadfb7aa13efffa82e7719b35 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:39:53 +0000 Subject: ARM: PL08x: assign ccfg DMA request signal in prep_phy_channel() There is no need to wait until we start processing a tx descriptor before setting up the DMA request selection in the ccfg register. We know which channel and request will be used in prep_phy_channel(), so setup the ccfg request selection at txd creation time in prep_phy_channel(). Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 75f9e2d4b032..f0a29885cb83 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -194,18 +194,10 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_phy_chan *phychan = plchan->phychan; struct pl08x_lli *lli = &txd->llis_va[0]; - u32 val, ccfg = txd->ccfg; + u32 val; plchan->at = txd; - /* Assign the flow control signal to this channel */ - if (txd->direction == DMA_TO_DEVICE) - /* Select signal as destination */ - ccfg |= phychan->signal << PL080_CONFIG_DST_SEL_SHIFT; - else if (txd->direction == DMA_FROM_DEVICE) - /* Select signal as source */ - ccfg |= phychan->signal << PL080_CONFIG_SRC_SEL_SHIFT; - /* Wait for channel inactive */ while (pl08x_phy_channel_busy(phychan)) cpu_relax(); @@ -214,13 +206,13 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, "WRITE channel %d: csrc=0x%08x, cdst=0x%08x, " "clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n", phychan->id, lli->src, lli->dst, lli->lli, lli->cctl, - ccfg); + txd->ccfg); writel(lli->src, phychan->base + PL080_CH_SRC_ADDR); writel(lli->dst, phychan->base + PL080_CH_DST_ADDR); writel(lli->lli, phychan->base + PL080_CH_LLI); writel(lli->cctl, phychan->base + PL080_CH_CONTROL); - writel(ccfg, phychan->base + PL080_CH_CONFIG); + writel(txd->ccfg, phychan->base + PL080_CH_CONFIG); /* Enable the DMA channel */ /* Do not access config register until channel shows as disabled */ @@ -1001,6 +993,12 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan, return -EBUSY; } ch->signal = ret; + + /* Assign the flow control signal to this channel */ + if (txd->direction == DMA_TO_DEVICE) + txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT; + else if (txd->direction == DMA_FROM_DEVICE) + txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT; } dev_dbg(&pl08x->adev->dev, "allocated physical channel %d and signal %d for xfer on %s\n", -- cgit v1.2.1 From 70b5ed6b6d72cd8b1a3d4b7b878a0dd132bec7ba Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:40:13 +0000 Subject: ARM: PL08x: move default cctl into txd structure Rather than modifying platform data while preparing a transfer, copy the cctl value into the txd structure and modify the value there. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index f0a29885cb83..6d224d41be2d 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -577,7 +577,6 @@ static inline size_t pl08x_pre_boundary(u32 addr, size_t len) static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd) { - struct pl08x_channel_data *cd = txd->cd; struct pl08x_bus_data *mbus, *sbus; size_t remainder; int num_llis = 0; @@ -595,17 +594,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, pl08x->pool_ctr++; - /* - * Initialize bus values for this transfer - * from the passed optimal values - */ - if (!cd) { - dev_err(&pl08x->adev->dev, "%s no channel data\n", __func__); - return 0; - } - - /* Get the default CCTL from the platform data */ - cctl = cd->cctl; + /* Get the default CCTL */ + cctl = txd->cctl; /* * On the PL080 we have two bus masters and we @@ -1358,11 +1348,11 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( txd->dstbus.addr = dest; /* Set platform data for m2m */ - txd->cd = &pl08x->pd->memcpy_channel; txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; + txd->cctl = pl08x->pd->memcpy_channel.cctl; /* Both to be incremented or the code will break */ - txd->cd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; + txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; txd->len = len; ret = pl08x_prep_channel_resources(plchan, txd); @@ -1415,6 +1405,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( * channel target address dynamically at runtime. */ txd->direction = direction; + txd->cctl = plchan->cd->cctl; + if (direction == DMA_TO_DEVICE) { txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->srcbus.addr = sgl->dma_address; @@ -1434,7 +1426,6 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( "%s direction unsupported\n", __func__); return NULL; } - txd->cd = plchan->cd; txd->len = sgl->length; ret = pl08x_prep_channel_resources(plchan, txd); -- cgit v1.2.1 From 1cae78f12028eebdc9107eaf168add46e66fb3f8 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:40:33 +0000 Subject: ARM: PL08x: move cctl increment and protection setup to prep_slave_sg We don't need to initialize the cctl increment and protection values in the runtime_config method - we have all the inforamtion to setup these values in prep_slave_sg(). Move their initialization there. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 6d224d41be2d..72cc971e93e5 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1148,12 +1148,10 @@ static void dma_set_runtime_config(struct dma_chan *chan, plchan->runtime_direction = config->direction; if (config->direction == DMA_TO_DEVICE) { plchan->runtime_addr = config->dst_addr; - cctl |= PL080_CONTROL_SRC_INCR; addr_width = config->dst_addr_width; maxburst = config->dst_maxburst; } else if (config->direction == DMA_FROM_DEVICE) { plchan->runtime_addr = config->src_addr; - cctl |= PL080_CONTROL_DST_INCR; addr_width = config->src_addr_width; maxburst = config->src_maxburst; } else { @@ -1197,10 +1195,6 @@ static void dma_set_runtime_config(struct dma_chan *chan, cctl |= burst_sizes[i].reg; } - /* Access the cell in privileged mode, non-bufferable, non-cacheable */ - cctl &= ~PL080_CONTROL_PROT_MASK; - cctl |= PL080_CONTROL_PROT_SYS; - /* Modify the default channel data to fit PrimeCell request */ cd->cctl = cctl; @@ -1405,10 +1399,16 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( * channel target address dynamically at runtime. */ txd->direction = direction; - txd->cctl = plchan->cd->cctl; + txd->cctl = plchan->cd->cctl & + ~(PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR | + PL080_CONTROL_PROT_MASK); + + /* Access the cell in privileged mode, non-bufferable, non-cacheable */ + txd->cctl |= PL080_CONTROL_PROT_SYS; if (direction == DMA_TO_DEVICE) { txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; + txd->cctl |= PL080_CONTROL_SRC_INCR; txd->srcbus.addr = sgl->dma_address; if (plchan->runtime_addr) txd->dstbus.addr = plchan->runtime_addr; @@ -1416,6 +1416,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( txd->dstbus.addr = plchan->cd->addr; } else if (direction == DMA_FROM_DEVICE) { txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; + txd->cctl |= PL080_CONTROL_DST_INCR; if (plchan->runtime_addr) txd->srcbus.addr = plchan->runtime_addr; else -- cgit v1.2.1 From c7da9a56d608145cc763bcfc9329b92c4244d8d9 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:40:53 +0000 Subject: ARM: PL08x: move AHB master port selection into prep_* functions As we initialize the default cctl value in the prep_* functions along with the increment settings, we don't need to repeat the selection of the AHB ports each time we create a LLI entry. Do this in the prep_* functions once per transfer. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 47 +++++++++++++++++++++++------------------------ 1 file changed, 23 insertions(+), 24 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 72cc971e93e5..4ee0ab19b1b6 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -597,26 +597,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* Get the default CCTL */ cctl = txd->cctl; - /* - * On the PL080 we have two bus masters and we - * should select one for source and one for - * destination. We try to use AHB2 for the - * bus which does not increment (typically the - * peripheral) else we just choose something. - */ - cctl &= ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2); - if (pl08x->vd->dualmaster) { - if (cctl & PL080_CONTROL_SRC_INCR) - /* Source increments, use AHB2 for destination */ - cctl |= PL080_CONTROL_DST_AHB2; - else if (cctl & PL080_CONTROL_DST_INCR) - /* Destination increments, use AHB2 for source */ - cctl |= PL080_CONTROL_SRC_AHB2; - else - /* Just pick something, source AHB1 dest AHB2 */ - cctl |= PL080_CONTROL_DST_AHB2; - } - /* Find maximum width of the source bus */ txd->srcbus.maxwidth = pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_SWIDTH_MASK) >> @@ -1340,14 +1320,25 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( txd->direction = DMA_NONE; txd->srcbus.addr = src; txd->dstbus.addr = dest; + txd->len = len; /* Set platform data for m2m */ txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; - txd->cctl = pl08x->pd->memcpy_channel.cctl; + txd->cctl = pl08x->pd->memcpy_channel.cctl & + ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2); /* Both to be incremented or the code will break */ txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; - txd->len = len; + + /* + * On the PL080 we have two bus masters and we should select one for + * source and one for destination. We try to use AHB2 for the bus + * which does not increment (typically the peripheral) else we just + * choose something. + */ + if (pl08x->vd->dualmaster) + /* Source increments, use AHB2 for destination */ + txd->cctl |= PL080_CONTROL_DST_AHB2; ret = pl08x_prep_channel_resources(plchan, txd); if (ret) @@ -1399,8 +1390,11 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( * channel target address dynamically at runtime. */ txd->direction = direction; + txd->len = sgl->length; + txd->cctl = plchan->cd->cctl & - ~(PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR | + ~(PL080_CONTROL_SRC_AHB2 | PL080_CONTROL_DST_AHB2 | + PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR | PL080_CONTROL_PROT_MASK); /* Access the cell in privileged mode, non-bufferable, non-cacheable */ @@ -1409,6 +1403,9 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( if (direction == DMA_TO_DEVICE) { txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl |= PL080_CONTROL_SRC_INCR; + if (pl08x->vd->dualmaster) + /* Source increments, use AHB2 for destination */ + txd->cctl |= PL080_CONTROL_DST_AHB2; txd->srcbus.addr = sgl->dma_address; if (plchan->runtime_addr) txd->dstbus.addr = plchan->runtime_addr; @@ -1417,6 +1414,9 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( } else if (direction == DMA_FROM_DEVICE) { txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl |= PL080_CONTROL_DST_INCR; + if (pl08x->vd->dualmaster) + /* Destination increments, use AHB2 for source */ + txd->cctl |= PL080_CONTROL_SRC_AHB2; if (plchan->runtime_addr) txd->srcbus.addr = plchan->runtime_addr; else @@ -1427,7 +1427,6 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( "%s direction unsupported\n", __func__); return NULL; } - txd->len = sgl->length; ret = pl08x_prep_channel_resources(plchan, txd); if (ret) -- cgit v1.2.1 From 30749cb4a40f02a199640011e5ab5c5f60b8482e Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:41:13 +0000 Subject: ARM: PL08x: allow AHB master port selection to be configured Platforms need to be able to control which AHB master interface is used, as each AHB master interface may be asymetric. Allow the interfaces used for fetching LLIs, memory, and each peripheral to be configured individually. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 77 +++++++++++++++++++++++++++--------------------- 1 file changed, 43 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 4ee0ab19b1b6..986c12775b0b 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -126,6 +126,8 @@ struct pl08x_lli { * @phy_chans: array of data for the physical channels * @pool: a pool for the LLI descriptors * @pool_ctr: counter of LLIs in the pool + * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI fetches + * @mem_buses: set to indicate memory transfers on AHB2. * @lock: a spinlock for this struct */ struct pl08x_driver_data { @@ -138,6 +140,8 @@ struct pl08x_driver_data { struct pl08x_phy_chan *phy_chans; struct dma_pool *pool; int pool_ctr; + u8 lli_buses; + u8 mem_buses; spinlock_t lock; }; @@ -526,20 +530,12 @@ static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS); - llis_va[num_llis].cctl = cctl; - llis_va[num_llis].src = txd->srcbus.addr; - llis_va[num_llis].dst = txd->dstbus.addr; - - /* - * On versions with dual masters, you can optionally AND on - * PL080_LLI_LM_AHB2 to the LLI to tell the hardware to read - * in new LLIs with that controller, but we always try to - * choose AHB1 to point into memory. The idea is to have AHB2 - * fixed on the peripheral and AHB1 messing around in the - * memory. So we don't manipulate this bit currently. - */ - + llis_va[num_llis].cctl = cctl; + llis_va[num_llis].src = txd->srcbus.addr; + llis_va[num_llis].dst = txd->dstbus.addr; llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli); + if (pl08x->lli_buses & PL08X_AHB2) + llis_va[num_llis].lli |= PL080_LLI_LM_AHB2; if (cctl & PL080_CONTROL_SRC_INCR) txd->srcbus.addr += len; @@ -639,13 +635,6 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, pl08x_choose_master_bus(&txd->srcbus, &txd->dstbus, &mbus, &sbus, cctl); - - /* - * The lowest bit of the LLI register - * is also used to indicate which master to - * use for reading the LLIs. - */ - if (txd->len < mbus->buswidth) { /* * Less than a bus width available @@ -1282,6 +1271,23 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, return 0; } +/* + * Given the source and destination available bus masks, select which + * will be routed to each port. We try to have source and destination + * on separate ports, but always respect the allowable settings. + */ +static u32 pl08x_select_bus(struct pl08x_driver_data *pl08x, u8 src, u8 dst) +{ + u32 cctl = 0; + + if (!(dst & PL08X_AHB1) || ((dst & PL08X_AHB2) && (src & PL08X_AHB1))) + cctl |= PL080_CONTROL_DST_AHB2; + if (!(src & PL08X_AHB1) || ((src & PL08X_AHB2) && !(dst & PL08X_AHB2))) + cctl |= PL080_CONTROL_SRC_AHB2; + + return cctl; +} + static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan) { struct pl08x_txd *txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT); @@ -1330,15 +1336,9 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( /* Both to be incremented or the code will break */ txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR; - /* - * On the PL080 we have two bus masters and we should select one for - * source and one for destination. We try to use AHB2 for the bus - * which does not increment (typically the peripheral) else we just - * choose something. - */ if (pl08x->vd->dualmaster) - /* Source increments, use AHB2 for destination */ - txd->cctl |= PL080_CONTROL_DST_AHB2; + txd->cctl |= pl08x_select_bus(pl08x, + pl08x->mem_buses, pl08x->mem_buses); ret = pl08x_prep_channel_resources(plchan, txd); if (ret) @@ -1359,6 +1359,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_txd *txd; + u8 src_buses, dst_buses; int ret; /* @@ -1403,31 +1404,31 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( if (direction == DMA_TO_DEVICE) { txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl |= PL080_CONTROL_SRC_INCR; - if (pl08x->vd->dualmaster) - /* Source increments, use AHB2 for destination */ - txd->cctl |= PL080_CONTROL_DST_AHB2; txd->srcbus.addr = sgl->dma_address; if (plchan->runtime_addr) txd->dstbus.addr = plchan->runtime_addr; else txd->dstbus.addr = plchan->cd->addr; + src_buses = pl08x->mem_buses; + dst_buses = plchan->cd->periph_buses; } else if (direction == DMA_FROM_DEVICE) { txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl |= PL080_CONTROL_DST_INCR; - if (pl08x->vd->dualmaster) - /* Destination increments, use AHB2 for source */ - txd->cctl |= PL080_CONTROL_SRC_AHB2; if (plchan->runtime_addr) txd->srcbus.addr = plchan->runtime_addr; else txd->srcbus.addr = plchan->cd->addr; txd->dstbus.addr = sgl->dma_address; + src_buses = plchan->cd->periph_buses; + dst_buses = pl08x->mem_buses; } else { dev_err(&pl08x->adev->dev, "%s direction unsupported\n", __func__); return NULL; } + txd->cctl |= pl08x_select_bus(pl08x, src_buses, dst_buses); + ret = pl08x_prep_channel_resources(plchan, txd); if (ret) return NULL; @@ -1879,6 +1880,14 @@ static int pl08x_probe(struct amba_device *adev, struct amba_id *id) pl08x->adev = adev; pl08x->vd = vd; + /* By default, AHB1 only. If dualmaster, from platform */ + pl08x->lli_buses = PL08X_AHB1; + pl08x->mem_buses = PL08X_AHB1; + if (pl08x->vd->dualmaster) { + pl08x->lli_buses = pl08x->pd->lli_buses; + pl08x->mem_buses = pl08x->pd->mem_buses; + } + /* A DMA memory pool for LLIs, align on 1-byte boundary */ pl08x->pool = dma_pool_create(DRIVER_NAME, &pl08x->adev->dev, PL08X_LLI_TSFR_SIZE, PL08X_ALIGN, 0); -- cgit v1.2.1 From 858c21c0f380fb9c78f47f3e372f9baadc54dffe Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:41:34 +0000 Subject: ARM: PL08x: move callback outside spinlock'd region MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Calling the callback handler with spinlocks in the tasklet held leads to deadlock when dmaengine functions are called: BUG: spinlock lockup on CPU#0, sh/417, c1870a08 Backtrace: ... [] (do_raw_spin_lock+0x0/0x154) from [] (_raw_spin_lock_irqsave+0x54/0x60) [] (_raw_spin_lock_irqsave+0x0/0x60) from [] (pl08x_prep_channel_resources+0x718/0x8b4) [] (pl08x_prep_channel_resources+0x0/0x8b4) from [] (pl08x_prep_slave_sg+0x120/0x19c) [] (pl08x_prep_slave_sg+0x0/0x19c) from [] (pl011_dma_tx_refill+0x164/0x224) [] (pl011_dma_tx_refill+0x0/0x224) from [] (pl011_dma_tx_callback+0x7c/0xc4) [] (pl011_dma_tx_callback+0x0/0xc4) from [] (pl08x_tasklet+0x60/0x368) [] (pl08x_tasklet+0x0/0x368) from [] (tasklet_action+0xa0/0x100) Dan quoted the documentation: > 2/ Completion callback routines cannot submit new operations.  This >    results in recursion in the synchronous case and spin_locks being >    acquired twice in the asynchronous case. but then followed up to say: > I should clarify, this is the async_memcpy() api requirement which is > not used outside of md/raid5. DMA drivers can and do allow new > submissions from callbacks, and the ones that do so properly move the > callback outside of the driver lock. So let's fix it by moving the callback out of the spinlocked region. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 986c12775b0b..660165dd945a 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1540,32 +1540,29 @@ static void pl08x_tasklet(unsigned long data) { struct pl08x_dma_chan *plchan = (struct pl08x_dma_chan *) data; struct pl08x_driver_data *pl08x = plchan->host; + struct pl08x_txd *txd; + dma_async_tx_callback callback = NULL; + void *callback_param = NULL; unsigned long flags; spin_lock_irqsave(&plchan->lock, flags); - if (plchan->at) { - dma_async_tx_callback callback = - plchan->at->tx.callback; - void *callback_param = - plchan->at->tx.callback_param; + txd = plchan->at; + plchan->at = NULL; - /* - * Update last completed - */ - plchan->lc = plchan->at->tx.cookie; + if (txd) { + callback = txd->tx.callback; + callback_param = txd->tx.callback_param; /* - * Callback to signal completion + * Update last completed */ - if (callback) - callback(callback_param); + plchan->lc = txd->tx.cookie; /* * Free the descriptor */ - pl08x_free_txd(pl08x, plchan->at); - plchan->at = NULL; + pl08x_free_txd(pl08x, txd); } /* * If a new descriptor is queued, set it up @@ -1616,6 +1613,10 @@ static void pl08x_tasklet(unsigned long data) } spin_unlock_irqrestore(&plchan->lock, flags); + + /* Callback to signal completion */ + if (callback) + callback(callback_param); } static irqreturn_t pl08x_irq(int irq, void *dev) -- cgit v1.2.1 From 0059005f2cbf4847551b9ad9915ffffe23aef0b9 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:41:54 +0000 Subject: ARM: PL08x: make pl08x_fill_lli_for_desc() return void We don't need pl08x_fill_lli_for_desc() to return num_llis + 1 as we know that's what it always does. We can just pass in num_llis and use post-increment in the caller. This makes the code slightly easier to read. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 30 ++++++++++++------------------ 1 file changed, 12 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 660165dd945a..f61940434669 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -521,9 +521,8 @@ static void pl08x_choose_master_bus(struct pl08x_bus_data *src_bus, * Fills in one LLI for a certain transfer descriptor * and advance the counter */ -static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, - struct pl08x_txd *txd, int num_llis, int len, - u32 cctl, u32 *remainder) +static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, + struct pl08x_txd *txd, int num_llis, int len, u32 cctl, u32 *remainder) { struct pl08x_lli *llis_va = txd->llis_va; dma_addr_t llis_bus = txd->llis_bus; @@ -545,8 +544,6 @@ static int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, BUG_ON(*remainder < len); *remainder -= len; - - return num_llis + 1; } /* @@ -646,8 +643,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, "less than a bus width (remain 0x%08x)\n", __func__, remainder); cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - num_llis = - pl08x_fill_lli_for_desc(pl08x, txd, num_llis, 1, + pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1, cctl, &remainder); total_bytes++; } @@ -662,8 +658,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, "(remain 0x%08x)\n", __func__, remainder); cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - num_llis = pl08x_fill_lli_for_desc - (pl08x, txd, num_llis, 1, cctl, &remainder); + pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1, + cctl, &remainder); total_bytes++; } @@ -787,9 +783,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, dev_vdbg(&pl08x->adev->dev, "%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n", __func__, lli_len, remainder); - num_llis = pl08x_fill_lli_for_desc(pl08x, txd, - num_llis, lli_len, cctl, - &remainder); + pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, + lli_len, cctl, &remainder); total_bytes += lli_len; } @@ -806,10 +801,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, dev_vdbg(&pl08x->adev->dev, "%s align with boundary, single byte (remain 0x%08zx)\n", __func__, remainder); - num_llis = - pl08x_fill_lli_for_desc(pl08x, - txd, num_llis, 1, - cctl, &remainder); + pl08x_fill_lli_for_desc(pl08x, txd, + num_llis++, 1, cctl, + &remainder); total_bytes++; } } @@ -823,8 +817,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, dev_vdbg(&pl08x->adev->dev, "%s align with boundary, single odd byte (remain %zu)\n", __func__, remainder); - num_llis = pl08x_fill_lli_for_desc(pl08x, txd, num_llis, - 1, cctl, &remainder); + pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1, + cctl, &remainder); total_bytes++; } } -- cgit v1.2.1 From b61be8d728abad7fd98e62e98f22325f8f254b51 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:42:14 +0000 Subject: ARM: PL08x: ensure pl08x_pre_boundary() works for any value of addr pl08x_pre_boundary() was unsafe with addresses towards the top of memory space: boundary = ((addr >> PL08X_BOUNDARY_SHIFT) + 1) << PL08X_BOUNDARY_SHIFT; This can overflow a 32-bit number, producing zero. When it does: if (boundary < addr + len) return boundary - addr; else return len; results in (boundary - addr) returning either a large positive value. Also if addr + len overflows, this calculation also fails. We can fix this trivially as the only thing we're actually interested in is the value of the least significant PL08X_BOUNDARY_SHIFT bits: boundary_len = PL08X_BOUNDARY_SIZE - (addr & (PL08X_BOUNDARY_SIZE - 1)); gives us the number of bytes before 'addr' becomes a multiple of PL08X_BOUNDARY_SIZE. We can then just take the min() of the two calculated lengths. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index f61940434669..7c327c315878 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -547,19 +547,15 @@ static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, } /* - * Return number of bytes to fill to boundary, or len + * Return number of bytes to fill to boundary, or len. + * This calculation works for any value of addr. */ static inline size_t pl08x_pre_boundary(u32 addr, size_t len) { - u32 boundary; + size_t boundary_len = PL08X_BOUNDARY_SIZE - + (addr & (PL08X_BOUNDARY_SIZE - 1)); - boundary = ((addr >> PL08X_BOUNDARY_SHIFT) + 1) - << PL08X_BOUNDARY_SHIFT; - - if (boundary < addr + len) - return boundary - addr; - else - return len; + return min(boundary_len, len); } /* -- cgit v1.2.1 From d6cf7b597f7158616106068930d1c6203d9359eb Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:42:34 +0000 Subject: ARM: PL08x: use min() to calculate target_len Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 7c327c315878..91dd6bfcc30f 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -682,9 +682,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * If enough left try to send max possible, * otherwise try to send the remainder */ - target_len = remainder; - if (remainder > max_bytes_per_lli) - target_len = max_bytes_per_lli; + target_len = min(remainder, max_bytes_per_lli); /* * Set bus lengths for incrementing buses -- cgit v1.2.1 From 5f638b4f313e345bf02700910e581bccf71212f5 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:42:55 +0000 Subject: ARM: PL08x: fix fill_bytes calculation The number of bytes we want to fill into any LLI is the minimum of: - number of bytes remaining in the transfer - number of bytes we can transfer in a single LLI - number of bytes we can transfer without overflowing the source boundary - number of bytes we can transfer without overflowing the destination boundary The minimum of the first two is already calculated (target_len). We limit the boundary calculations to this number of bytes, which will then give us the number of bytes we can place into this LLI. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 91dd6bfcc30f..be7fa174d6c0 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -685,31 +685,25 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, target_len = min(remainder, max_bytes_per_lli); /* - * Set bus lengths for incrementing buses - * to number of bytes which fill to next memory - * boundary + * Set bus lengths for incrementing buses to the + * number of bytes which fill to next memory boundary, + * limiting on the target length calculated above. */ if (cctl & PL080_CONTROL_SRC_INCR) txd->srcbus.fill_bytes = - pl08x_pre_boundary( - txd->srcbus.addr, - remainder); + pl08x_pre_boundary(txd->srcbus.addr, + target_len); else - txd->srcbus.fill_bytes = - max_bytes_per_lli; + txd->srcbus.fill_bytes = target_len; if (cctl & PL080_CONTROL_DST_INCR) txd->dstbus.fill_bytes = - pl08x_pre_boundary( - txd->dstbus.addr, - remainder); + pl08x_pre_boundary(txd->dstbus.addr, + target_len); else - txd->dstbus.fill_bytes = - max_bytes_per_lli; + txd->dstbus.fill_bytes = target_len; - /* - * Find the nearest - */ + /* Find the nearest */ lli_len = min(txd->srcbus.fill_bytes, txd->dstbus.fill_bytes); -- cgit v1.2.1 From 542361f8e385355c68e263eba49d4306739b9220 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:43:15 +0000 Subject: ARM: PL08x: don't manipulate txd->srcbus or txd->dstbus during LLI fill Don't alter any txd->srcbus or txd->dstbus values while building the LLI list. This allows us to see the original dma_addr_t values passed in via the prep_memcpy() method. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 159 +++++++++++++++++++++++++---------------------- 1 file changed, 83 insertions(+), 76 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index be7fa174d6c0..39970c5038d6 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -481,38 +481,45 @@ static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth, return retbits; } +struct pl08x_lli_build_data { + struct pl08x_txd *txd; + struct pl08x_driver_data *pl08x; + struct pl08x_bus_data srcbus; + struct pl08x_bus_data dstbus; + size_t remainder; +}; + /* * Autoselect a master bus to use for the transfer * this prefers the destination bus if both available * if fixed address on one bus the other will be chosen */ -static void pl08x_choose_master_bus(struct pl08x_bus_data *src_bus, - struct pl08x_bus_data *dst_bus, struct pl08x_bus_data **mbus, - struct pl08x_bus_data **sbus, u32 cctl) +static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd, + struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl) { if (!(cctl & PL080_CONTROL_DST_INCR)) { - *mbus = src_bus; - *sbus = dst_bus; + *mbus = &bd->srcbus; + *sbus = &bd->dstbus; } else if (!(cctl & PL080_CONTROL_SRC_INCR)) { - *mbus = dst_bus; - *sbus = src_bus; + *mbus = &bd->dstbus; + *sbus = &bd->srcbus; } else { - if (dst_bus->buswidth == 4) { - *mbus = dst_bus; - *sbus = src_bus; - } else if (src_bus->buswidth == 4) { - *mbus = src_bus; - *sbus = dst_bus; - } else if (dst_bus->buswidth == 2) { - *mbus = dst_bus; - *sbus = src_bus; - } else if (src_bus->buswidth == 2) { - *mbus = src_bus; - *sbus = dst_bus; + if (bd->dstbus.buswidth == 4) { + *mbus = &bd->dstbus; + *sbus = &bd->srcbus; + } else if (bd->srcbus.buswidth == 4) { + *mbus = &bd->srcbus; + *sbus = &bd->dstbus; + } else if (bd->dstbus.buswidth == 2) { + *mbus = &bd->dstbus; + *sbus = &bd->srcbus; + } else if (bd->srcbus.buswidth == 2) { + *mbus = &bd->srcbus; + *sbus = &bd->dstbus; } else { - /* src_bus->buswidth == 1 */ - *mbus = dst_bus; - *sbus = src_bus; + /* bd->srcbus.buswidth == 1 */ + *mbus = &bd->dstbus; + *sbus = &bd->srcbus; } } } @@ -521,29 +528,29 @@ static void pl08x_choose_master_bus(struct pl08x_bus_data *src_bus, * Fills in one LLI for a certain transfer descriptor * and advance the counter */ -static void pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x, - struct pl08x_txd *txd, int num_llis, int len, u32 cctl, u32 *remainder) +static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, + int num_llis, int len, u32 cctl) { - struct pl08x_lli *llis_va = txd->llis_va; - dma_addr_t llis_bus = txd->llis_bus; + struct pl08x_lli *llis_va = bd->txd->llis_va; + dma_addr_t llis_bus = bd->txd->llis_bus; BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS); llis_va[num_llis].cctl = cctl; - llis_va[num_llis].src = txd->srcbus.addr; - llis_va[num_llis].dst = txd->dstbus.addr; + llis_va[num_llis].src = bd->srcbus.addr; + llis_va[num_llis].dst = bd->dstbus.addr; llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli); - if (pl08x->lli_buses & PL08X_AHB2) + if (bd->pl08x->lli_buses & PL08X_AHB2) llis_va[num_llis].lli |= PL080_LLI_LM_AHB2; if (cctl & PL080_CONTROL_SRC_INCR) - txd->srcbus.addr += len; + bd->srcbus.addr += len; if (cctl & PL080_CONTROL_DST_INCR) - txd->dstbus.addr += len; + bd->dstbus.addr += len; - BUG_ON(*remainder < len); + BUG_ON(bd->remainder < len); - *remainder -= len; + bd->remainder -= len; } /* @@ -567,7 +574,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd) { struct pl08x_bus_data *mbus, *sbus; - size_t remainder; + struct pl08x_lli_build_data bd; int num_llis = 0; u32 cctl; size_t max_bytes_per_lli; @@ -586,38 +593,43 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* Get the default CCTL */ cctl = txd->cctl; + bd.txd = txd; + bd.pl08x = pl08x; + bd.srcbus.addr = txd->srcbus.addr; + bd.dstbus.addr = txd->dstbus.addr; + /* Find maximum width of the source bus */ - txd->srcbus.maxwidth = + bd.srcbus.maxwidth = pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_SWIDTH_MASK) >> PL080_CONTROL_SWIDTH_SHIFT); /* Find maximum width of the destination bus */ - txd->dstbus.maxwidth = + bd.dstbus.maxwidth = pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_DWIDTH_MASK) >> PL080_CONTROL_DWIDTH_SHIFT); /* Set up the bus widths to the maximum */ - txd->srcbus.buswidth = txd->srcbus.maxwidth; - txd->dstbus.buswidth = txd->dstbus.maxwidth; + bd.srcbus.buswidth = bd.srcbus.maxwidth; + bd.dstbus.buswidth = bd.dstbus.maxwidth; dev_vdbg(&pl08x->adev->dev, "%s source bus is %d bytes wide, dest bus is %d bytes wide\n", - __func__, txd->srcbus.buswidth, txd->dstbus.buswidth); + __func__, bd.srcbus.buswidth, bd.dstbus.buswidth); /* * Bytes transferred == tsize * MIN(buswidths), not max(buswidths) */ - max_bytes_per_lli = min(txd->srcbus.buswidth, txd->dstbus.buswidth) * + max_bytes_per_lli = min(bd.srcbus.buswidth, bd.dstbus.buswidth) * PL080_CONTROL_TRANSFER_SIZE_MASK; dev_vdbg(&pl08x->adev->dev, "%s max bytes per lli = %zu\n", __func__, max_bytes_per_lli); /* We need to count this down to zero */ - remainder = txd->len; + bd.remainder = txd->len; dev_vdbg(&pl08x->adev->dev, "%s remainder = %zu\n", - __func__, remainder); + __func__, bd.remainder); /* * Choose bus to align to @@ -625,22 +637,20 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * - if fixed address on one bus chooses other * - modifies cctl to choose an appropriate master */ - pl08x_choose_master_bus(&txd->srcbus, &txd->dstbus, - &mbus, &sbus, cctl); + pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl); if (txd->len < mbus->buswidth) { /* * Less than a bus width available * - send as single bytes */ - while (remainder) { + while (bd.remainder) { dev_vdbg(&pl08x->adev->dev, "%s single byte LLIs for a transfer of " "less than a bus width (remain 0x%08x)\n", - __func__, remainder); + __func__, bd.remainder); cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1, - cctl, &remainder); + pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); total_bytes++; } } else { @@ -652,10 +662,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, dev_vdbg(&pl08x->adev->dev, "%s adjustment lli for less than bus width " "(remain 0x%08x)\n", - __func__, remainder); + __func__, bd.remainder); cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1, - cctl, &remainder); + pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); total_bytes++; } @@ -675,14 +684,14 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * Make largest possible LLIs until less than one bus * width left */ - while (remainder > (mbus->buswidth - 1)) { + while (bd.remainder > (mbus->buswidth - 1)) { size_t lli_len, target_len, tsize, odd_bytes; /* * If enough left try to send max possible, * otherwise try to send the remainder */ - target_len = min(remainder, max_bytes_per_lli); + target_len = min(bd.remainder, max_bytes_per_lli); /* * Set bus lengths for incrementing buses to the @@ -690,24 +699,24 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * limiting on the target length calculated above. */ if (cctl & PL080_CONTROL_SRC_INCR) - txd->srcbus.fill_bytes = - pl08x_pre_boundary(txd->srcbus.addr, + bd.srcbus.fill_bytes = + pl08x_pre_boundary(bd.srcbus.addr, target_len); else - txd->srcbus.fill_bytes = target_len; + bd.srcbus.fill_bytes = target_len; if (cctl & PL080_CONTROL_DST_INCR) - txd->dstbus.fill_bytes = - pl08x_pre_boundary(txd->dstbus.addr, + bd.dstbus.fill_bytes = + pl08x_pre_boundary(bd.dstbus.addr, target_len); else - txd->dstbus.fill_bytes = target_len; + bd.dstbus.fill_bytes = target_len; /* Find the nearest */ - lli_len = min(txd->srcbus.fill_bytes, - txd->dstbus.fill_bytes); + lli_len = min(bd.srcbus.fill_bytes, + bd.dstbus.fill_bytes); - BUG_ON(lli_len > remainder); + BUG_ON(lli_len > bd.remainder); if (lli_len <= 0) { dev_err(&pl08x->adev->dev, @@ -764,15 +773,15 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, } cctl = pl08x_cctl_bits(cctl, - txd->srcbus.buswidth, - txd->dstbus.buswidth, + bd.srcbus.buswidth, + bd.dstbus.buswidth, tsize); dev_vdbg(&pl08x->adev->dev, "%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n", - __func__, lli_len, remainder); - pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, - lli_len, cctl, &remainder); + __func__, lli_len, bd.remainder); + pl08x_fill_lli_for_desc(&bd, num_llis++, + lli_len, cctl); total_bytes += lli_len; } @@ -784,14 +793,13 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, */ int j; for (j = 0; (j < mbus->buswidth) - && (remainder); j++) { + && (bd.remainder); j++) { cctl = pl08x_cctl_bits(cctl, 1, 1, 1); dev_vdbg(&pl08x->adev->dev, "%s align with boundary, single byte (remain 0x%08zx)\n", - __func__, remainder); - pl08x_fill_lli_for_desc(pl08x, txd, - num_llis++, 1, cctl, - &remainder); + __func__, bd.remainder); + pl08x_fill_lli_for_desc(&bd, + num_llis++, 1, cctl); total_bytes++; } } @@ -800,13 +808,12 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, /* * Send any odd bytes */ - while (remainder) { + while (bd.remainder) { cctl = pl08x_cctl_bits(cctl, 1, 1, 1); dev_vdbg(&pl08x->adev->dev, "%s align with boundary, single odd byte (remain %zu)\n", - __func__, remainder); - pl08x_fill_lli_for_desc(pl08x, txd, num_llis++, 1, - cctl, &remainder); + __func__, bd.remainder); + pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); total_bytes++; } } -- cgit v1.2.1 From d7244e9a27a3da27d62aabf560ee828d7991493e Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:43:35 +0000 Subject: ARM: PL08x: shrink srcbus/dstbus in txd structure We only need to store the dma address. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 39970c5038d6..8d8d33ce5684 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -595,8 +595,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, bd.txd = txd; bd.pl08x = pl08x; - bd.srcbus.addr = txd->srcbus.addr; - bd.dstbus.addr = txd->dstbus.addr; + bd.srcbus.addr = txd->src_addr; + bd.dstbus.addr = txd->dst_addr; /* Find maximum width of the source bus */ bd.srcbus.maxwidth = @@ -1313,8 +1313,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( } txd->direction = DMA_NONE; - txd->srcbus.addr = src; - txd->dstbus.addr = dest; + txd->src_addr = src; + txd->dst_addr = dest; txd->len = len; /* Set platform data for m2m */ @@ -1393,21 +1393,21 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( if (direction == DMA_TO_DEVICE) { txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl |= PL080_CONTROL_SRC_INCR; - txd->srcbus.addr = sgl->dma_address; + txd->src_addr = sgl->dma_address; if (plchan->runtime_addr) - txd->dstbus.addr = plchan->runtime_addr; + txd->dst_addr = plchan->runtime_addr; else - txd->dstbus.addr = plchan->cd->addr; + txd->dst_addr = plchan->cd->addr; src_buses = pl08x->mem_buses; dst_buses = plchan->cd->periph_buses; } else if (direction == DMA_FROM_DEVICE) { txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl |= PL080_CONTROL_DST_INCR; if (plchan->runtime_addr) - txd->srcbus.addr = plchan->runtime_addr; + txd->src_addr = plchan->runtime_addr; else - txd->srcbus.addr = plchan->cd->addr; - txd->dstbus.addr = sgl->dma_address; + txd->src_addr = plchan->cd->addr; + txd->dst_addr = sgl->dma_address; src_buses = plchan->cd->periph_buses; dst_buses = pl08x->mem_buses; } else { -- cgit v1.2.1 From c04287948ec8308fceedda980373bc7d53620255 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:43:56 +0000 Subject: ARM: PL08x: store prep_* flags in async_tx structure Like other DMA engine drivers do, store the passed flags into the async_tx structure, so they can be checked when the operation completes. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 8d8d33ce5684..00058e30a9c3 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1277,12 +1277,14 @@ static u32 pl08x_select_bus(struct pl08x_driver_data *pl08x, u8 src, u8 dst) return cctl; } -static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan) +static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan, + unsigned long flags) { struct pl08x_txd *txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT); if (txd) { dma_async_tx_descriptor_init(&txd->tx, &plchan->chan); + txd->tx.flags = flags; txd->tx.tx_submit = pl08x_tx_submit; INIT_LIST_HEAD(&txd->node); @@ -1305,7 +1307,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( struct pl08x_txd *txd; int ret; - txd = pl08x_get_txd(plchan); + txd = pl08x_get_txd(plchan, flags); if (!txd) { dev_err(&pl08x->adev->dev, "%s no memory for descriptor\n", __func__); @@ -1363,7 +1365,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n", __func__, sgl->length, plchan->name); - txd = pl08x_get_txd(plchan); + txd = pl08x_get_txd(plchan, flags); if (!txd) { dev_err(&pl08x->adev->dev, "%s no txd\n", __func__); return NULL; -- cgit v1.2.1 From 3d992e1a6f8465db3921ef75bfc490fbd2f40cd3 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:44:16 +0000 Subject: ARM: PL08x: implement unmapping of memcpy buffers The DMA engine API requires DMA engine implementations to unmap buffers passed into the non-slave DMA methods unless the relevant completion flag is set. We aren't doing this, so implement this facility. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 52 ++++++++++++++++++++++++++++++++++++------------ 1 file changed, 39 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 00058e30a9c3..fb469dedcdf3 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1527,13 +1527,33 @@ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) writel(val, pl08x->base + PL080_CONFIG); } +static void pl08x_unmap_buffers(struct pl08x_txd *txd) +{ + struct device *dev = txd->tx.chan->device->dev; + + if (!(txd->tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { + if (txd->tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE) + dma_unmap_single(dev, txd->src_addr, txd->len, + DMA_TO_DEVICE); + else + dma_unmap_page(dev, txd->src_addr, txd->len, + DMA_TO_DEVICE); + } + if (!(txd->tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { + if (txd->tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE) + dma_unmap_single(dev, txd->dst_addr, txd->len, + DMA_FROM_DEVICE); + else + dma_unmap_page(dev, txd->dst_addr, txd->len, + DMA_FROM_DEVICE); + } +} + static void pl08x_tasklet(unsigned long data) { struct pl08x_dma_chan *plchan = (struct pl08x_dma_chan *) data; struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_txd *txd; - dma_async_tx_callback callback = NULL; - void *callback_param = NULL; unsigned long flags; spin_lock_irqsave(&plchan->lock, flags); @@ -1542,18 +1562,10 @@ static void pl08x_tasklet(unsigned long data) plchan->at = NULL; if (txd) { - callback = txd->tx.callback; - callback_param = txd->tx.callback_param; - /* * Update last completed */ plchan->lc = txd->tx.cookie; - - /* - * Free the descriptor - */ - pl08x_free_txd(pl08x, txd); } /* * If a new descriptor is queued, set it up @@ -1605,9 +1617,23 @@ static void pl08x_tasklet(unsigned long data) spin_unlock_irqrestore(&plchan->lock, flags); - /* Callback to signal completion */ - if (callback) - callback(callback_param); + if (txd) { + dma_async_tx_callback callback = txd->tx.callback; + void *callback_param = txd->tx.callback_param; + + /* Don't try to unmap buffers on slave channels */ + if (!plchan->slave) + pl08x_unmap_buffers(txd); + + /* Free the descriptor */ + spin_lock_irqsave(&plchan->lock, flags); + pl08x_free_txd(pl08x, txd); + spin_unlock_irqrestore(&plchan->lock, flags); + + /* Callback to signal completion */ + if (callback) + callback(callback_param); + } } static irqreturn_t pl08x_irq(int irq, void *dev) -- cgit v1.2.1 From 15c17232fbd1f7687c740c3c26f9e7f337bd9e36 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:44:36 +0000 Subject: ARM: PL08x: rename 'desc_list' as 'pend_list' This 'desc_list' is actually a list of pending descriptors, so name it after its function (pending list) rather than what it contains (descriptors). Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index fb469dedcdf3..433b9e747f75 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -348,9 +348,9 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) } /* Sum up all queued transactions */ - if (!list_empty(&plchan->desc_list)) { + if (!list_empty(&plchan->pend_list)) { struct pl08x_txd *txdi; - list_for_each_entry(txdi, &plchan->desc_list, node) { + list_for_each_entry(txdi, &plchan->pend_list, node) { bytes += txdi->len; } } @@ -880,9 +880,9 @@ static void pl08x_free_txd_list(struct pl08x_driver_data *pl08x, struct pl08x_txd *txdi = NULL; struct pl08x_txd *next; - if (!list_empty(&plchan->desc_list)) { + if (!list_empty(&plchan->pend_list)) { list_for_each_entry_safe(txdi, - next, &plchan->desc_list, node) { + next, &plchan->pend_list, node) { list_del(&txdi->node); pl08x_free_txd(pl08x, txdi); } @@ -1183,10 +1183,10 @@ static void pl08x_issue_pending(struct dma_chan *chan) } /* Take the first element in the queue and execute it */ - if (!list_empty(&plchan->desc_list)) { + if (!list_empty(&plchan->pend_list)) { struct pl08x_txd *next; - next = list_first_entry(&plchan->desc_list, + next = list_first_entry(&plchan->pend_list, struct pl08x_txd, node); list_del(&next->node); @@ -1213,7 +1213,7 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, spin_lock_irqsave(&plchan->lock, plchan->lockflags); - list_add_tail(&txd->node, &plchan->desc_list); + list_add_tail(&txd->node, &plchan->pend_list); /* * See if we already have a physical channel allocated, @@ -1571,10 +1571,10 @@ static void pl08x_tasklet(unsigned long data) * If a new descriptor is queued, set it up * plchan->at is NULL here */ - if (!list_empty(&plchan->desc_list)) { + if (!list_empty(&plchan->pend_list)) { struct pl08x_txd *next; - next = list_first_entry(&plchan->desc_list, + next = list_first_entry(&plchan->pend_list, struct pl08x_txd, node); list_del(&next->node); @@ -1736,7 +1736,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, chan->lc = 0; spin_lock_init(&chan->lock); - INIT_LIST_HEAD(&chan->desc_list); + INIT_LIST_HEAD(&chan->pend_list); tasklet_init(&chan->tasklet, pl08x_tasklet, (unsigned long) chan); -- cgit v1.2.1 From 501e67e82dee68d0a594ec0549f3d6a2943c91f5 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:44:57 +0000 Subject: ARM: PL08x: put txd's on the pending list in pl08x_tx_submit() Don't place TXDs on the pending list when they're prepared - place them on the list when they're ready to be submitted. Also, only place memcpy requests in the wait state when they're submitted and don't have a physical channel associated. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 46 ++++++++++++++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 433b9e747f75..650e2bbc7aad 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -173,6 +173,11 @@ static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan) return container_of(chan, struct pl08x_dma_chan, chan); } +static inline struct pl08x_txd *to_pl08x_txd(struct dma_async_tx_descriptor *tx) +{ + return container_of(tx, struct pl08x_txd, tx); +} + /* * Physical channel handling */ @@ -974,11 +979,27 @@ static void release_phy_channel(struct pl08x_dma_chan *plchan) static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) { struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan); + struct pl08x_txd *txd = to_pl08x_txd(tx); plchan->chan.cookie += 1; if (plchan->chan.cookie < 0) plchan->chan.cookie = 1; tx->cookie = plchan->chan.cookie; + + /* Put this onto the pending list */ + list_add_tail(&txd->node, &plchan->pend_list); + + /* + * If there was no physical channel available for this memcpy, + * stack the request up and indicate that the channel is waiting + * for a free physical channel. + */ + if (!plchan->slave && !plchan->phychan) { + /* Do this memcpy whenever there is a channel ready */ + plchan->state = PL08X_CHAN_WAITING; + plchan->waiting = txd; + } + /* This unlock follows the lock in the prep() function */ spin_unlock_irqrestore(&plchan->lock, plchan->lockflags); @@ -1213,8 +1234,6 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, spin_lock_irqsave(&plchan->lock, plchan->lockflags); - list_add_tail(&txd->node, &plchan->pend_list); - /* * See if we already have a physical channel allocated, * else this is the time to try to get one. @@ -1222,24 +1241,23 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, ret = prep_phy_channel(plchan, txd); if (ret) { /* - * No physical channel available, we will - * stack up the memcpy channels until there is a channel - * available to handle it whereas slave transfers may - * have been denied due to platform channel muxing restrictions - * and since there is no guarantee that this will ever be - * resolved, and since the signal must be acquired AFTER - * acquiring the physical channel, we will let them be NACK:ed - * with -EBUSY here. The drivers can alway retry the prep() - * call if they are eager on doing this using DMA. + * No physical channel was available. + * + * memcpy transfers can be sorted out at submission time. + * + * Slave transfers may have been denied due to platform + * channel muxing restrictions. Since there is no guarantee + * that this will ever be resolved, and the signal must be + * acquired AFTER acquiring the physical channel, we will let + * them be NACK:ed with -EBUSY here. The drivers can retry + * the prep() call if they are eager on doing this using DMA. */ if (plchan->slave) { pl08x_free_txd_list(pl08x, plchan); + pl08x_free_txd(pl08x, txd); spin_unlock_irqrestore(&plchan->lock, plchan->lockflags); return -EBUSY; } - /* Do this memcpy whenever there is a channel ready */ - plchan->state = PL08X_CHAN_WAITING; - plchan->waiting = txd; } else /* * Else we're all set, paused and ready to roll, -- cgit v1.2.1 From 8087aacda040bdbf84940712d132ce80c30b9d5d Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:45:17 +0000 Subject: ARM: PL08x: introduce 'phychan_hold' to hold on to physical channels Introduce 'phychan_hold' to hold on to physical DMA channels while we're preparing a new descriptor for it. This will be incremented when we allocate a physical channel and set the MUX registers during the preparation of the TXD, and will only be decremented when the TXD is submitted. This prevents the physical channel being given up before the new TXD is placed on the queue. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 650e2bbc7aad..bf6f7d02c9f6 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -959,6 +959,7 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan, ch->signal, plchan->name); + plchan->phychan_hold++; plchan->phychan = ch; return 0; @@ -998,6 +999,8 @@ static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) /* Do this memcpy whenever there is a channel ready */ plchan->state = PL08X_CHAN_WAITING; plchan->waiting = txd; + } else { + plchan->phychan_hold--; } /* This unlock follows the lock in the prep() function */ @@ -1585,6 +1588,7 @@ static void pl08x_tasklet(unsigned long data) */ plchan->lc = txd->tx.cookie; } + /* * If a new descriptor is queued, set it up * plchan->at is NULL here @@ -1598,6 +1602,12 @@ static void pl08x_tasklet(unsigned long data) list_del(&next->node); pl08x_start_txd(plchan, next); + } else if (plchan->phychan_hold) { + /* + * This channel is still in use - we have a new txd being + * prepared and will soon be queued. Don't give up the + * physical channel. + */ } else { struct pl08x_dma_chan *waiting = NULL; @@ -1625,6 +1635,7 @@ static void pl08x_tasklet(unsigned long data) ret = prep_phy_channel(waiting, waiting->waiting); BUG_ON(ret); + waiting->phychan_hold--; waiting->state = PL08X_CHAN_RUNNING; waiting->waiting = NULL; pl08x_issue_pending(&waiting->chan); -- cgit v1.2.1 From c370e594efe2993620d24d41a78f325102e99d1c Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:45:37 +0000 Subject: ARM: PL08x: fix locking between prepare function and submit function The PL08x driver holds on to the channel lock with interrupts disabled between the prepare and the subsequent submit API functions. This means that the locking state when the prepare function returns is dependent on whether it suceeeds or not. It did this to ensure that the physical channel wasn't released, and as it used to add the descriptor onto the pending list at prepare time rather than submit time. Now that we have reorganized the code to remove those reasons, we can now safely release the spinlock at the end of preparation and reacquire it in our submit function. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 28 +++++++++------------------- 1 file changed, 9 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index bf6f7d02c9f6..1c9f712520d6 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -981,6 +981,9 @@ static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) { struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan); struct pl08x_txd *txd = to_pl08x_txd(tx); + unsigned long flags; + + spin_lock_irqsave(&plchan->lock, flags); plchan->chan.cookie += 1; if (plchan->chan.cookie < 0) @@ -1003,8 +1006,7 @@ static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx) plchan->phychan_hold--; } - /* This unlock follows the lock in the prep() function */ - spin_unlock_irqrestore(&plchan->lock, plchan->lockflags); + spin_unlock_irqrestore(&plchan->lock, flags); return tx->cookie; } @@ -1225,9 +1227,9 @@ static void pl08x_issue_pending(struct dma_chan *chan) static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, struct pl08x_txd *txd) { - int num_llis; struct pl08x_driver_data *pl08x = plchan->host; - int ret; + unsigned long flags; + int num_llis, ret; num_llis = pl08x_fill_llis_for_desc(pl08x, txd); if (!num_llis) { @@ -1235,7 +1237,7 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, return -EINVAL; } - spin_lock_irqsave(&plchan->lock, plchan->lockflags); + spin_lock_irqsave(&plchan->lock, flags); /* * See if we already have a physical channel allocated, @@ -1258,7 +1260,7 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, if (plchan->slave) { pl08x_free_txd_list(pl08x, plchan); pl08x_free_txd(pl08x, txd); - spin_unlock_irqrestore(&plchan->lock, plchan->lockflags); + spin_unlock_irqrestore(&plchan->lock, flags); return -EBUSY; } } else @@ -1272,11 +1274,7 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, if (plchan->state == PL08X_CHAN_IDLE) plchan->state = PL08X_CHAN_PAUSED; - /* - * Notice that we leave plchan->lock locked on purpose: - * it will be unlocked in the subsequent tx_submit() - * call. This is a consequence of the current API. - */ + spin_unlock_irqrestore(&plchan->lock, flags); return 0; } @@ -1355,10 +1353,6 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( ret = pl08x_prep_channel_resources(plchan, txd); if (ret) return NULL; - /* - * NB: the channel lock is held at this point so tx_submit() - * must be called in direct succession. - */ return &txd->tx; } @@ -1444,10 +1438,6 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( ret = pl08x_prep_channel_resources(plchan, txd); if (ret) return NULL; - /* - * NB: the channel lock is held at this point so tx_submit() - * must be called in direct succession. - */ return &txd->tx; } -- cgit v1.2.1 From f0fd944625b6e406dc273b8dffa16e0728c973e6 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:45:57 +0000 Subject: ARM: PL08x: allow dma_set_runtime_config() to return errors There are cases in dma_set_runtime_config() where we fail to perform the requested action - and we just issue a KERN_ERR message in that case. We have the facility to return an error to the caller, so that is what we should do. When we encounter an error due to invalid parameters, we should not modify driver state. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 1c9f712520d6..c7f7b82f6155 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1117,13 +1117,14 @@ static const struct burst_table burst_sizes[] = { }, }; -static void dma_set_runtime_config(struct dma_chan *chan, - struct dma_slave_config *config) +static int dma_set_runtime_config(struct dma_chan *chan, + struct dma_slave_config *config) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_channel_data *cd = plchan->cd; enum dma_slave_buswidth addr_width; + dma_addr_t addr; u32 maxburst; u32 cctl = 0; int i; @@ -1131,17 +1132,17 @@ static void dma_set_runtime_config(struct dma_chan *chan, /* Transfer direction */ plchan->runtime_direction = config->direction; if (config->direction == DMA_TO_DEVICE) { - plchan->runtime_addr = config->dst_addr; + addr = config->dst_addr; addr_width = config->dst_addr_width; maxburst = config->dst_maxburst; } else if (config->direction == DMA_FROM_DEVICE) { - plchan->runtime_addr = config->src_addr; + addr = config->src_addr; addr_width = config->src_addr_width; maxburst = config->src_maxburst; } else { dev_err(&pl08x->adev->dev, "bad runtime_config: alien transfer direction\n"); - return; + return -EINVAL; } switch (addr_width) { @@ -1160,7 +1161,7 @@ static void dma_set_runtime_config(struct dma_chan *chan, default: dev_err(&pl08x->adev->dev, "bad runtime_config: alien address width\n"); - return; + return -EINVAL; } /* @@ -1179,6 +1180,8 @@ static void dma_set_runtime_config(struct dma_chan *chan, cctl |= burst_sizes[i].reg; } + plchan->runtime_addr = addr; + /* Modify the default channel data to fit PrimeCell request */ cd->cctl = cctl; @@ -1190,6 +1193,8 @@ static void dma_set_runtime_config(struct dma_chan *chan, addr_width, maxburst, cctl); + + return 0; } /* @@ -1452,10 +1457,8 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, /* Controls applicable to inactive channels */ if (cmd == DMA_SLAVE_CONFIG) { - dma_set_runtime_config(chan, - (struct dma_slave_config *) - arg); - return 0; + return dma_set_runtime_config(chan, + (struct dma_slave_config *)arg); } /* -- cgit v1.2.1 From b7f758659265c173380b792862aaad1c23c0e004 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Mon, 3 Jan 2011 22:46:17 +0000 Subject: ARM: PL08x: prevent dma_set_runtime_config() reconfiguring memcpy channels Prevent dma_set_runtime_config() being used to alter the configuration supplied by the platform for memcpy channel configuration. No one should be trying to change this configuration. Signed-off-by: Russell King Acked-by: Linus Walleij Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index c7f7b82f6155..bebc678ed4fc 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1129,6 +1129,9 @@ static int dma_set_runtime_config(struct dma_chan *chan, u32 cctl = 0; int i; + if (!plchan->slave) + return -EINVAL; + /* Transfer direction */ plchan->runtime_direction = config->direction; if (config->direction == DMA_TO_DEVICE) { -- cgit v1.2.1 From beda1d49941765c0765e0f3cb95b4a86de67745d Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 14 Dec 2010 17:07:57 +0200 Subject: Revert "mtd: nand: add check for out of page read" This reverts commit e14feafbe0d5c6d64bb6fe4eba928cb57ac9a4c8. The commit limits the maximum amount of bytes which can be read at one go to the OOB size, which is incorrect, because mtd->read_oob() allows reading multiple pages at a time, see comment near "struct mtd_oob_ops" at include/linux/mtd/mtd.h. So this patch breaks ABI and hence, has to be reverted. Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 33550c43acc2..9c8da741dce0 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1782,13 +1782,6 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, else len = mtd->oobsize; - /* Do not allow read past end of page */ - if ((ops->ooboffs + readlen) > len) { - DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to read " - "past end of page\n", __func__); - return -EINVAL; - } - if (unlikely(ops->ooboffs >= len)) { DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start read " "outside oob\n", __func__); @@ -2384,7 +2377,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, return -EINVAL; } - /* Do not allow write past end of device */ + /* Do not allow reads past end of device */ if (unlikely(to >= mtd->size || ops->ooboffs + ops->ooblen > ((mtd->size >> chip->page_shift) - -- cgit v1.2.1 From d983c54ebd875f5f6fd37c154195c1c456a7af70 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Mon, 6 Dec 2010 09:05:18 +0900 Subject: mtd: OneNAND: Fix multi block erase support at 4KiB pagesize Original 4KiB pagesize chip (SLC) doesn't support Multi block erase at Spec. Signed-off-by: Kyungmin Park Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/onenand/onenand_base.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index c38bf9c54a11..88f23e3f3014 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -2492,7 +2492,8 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) /* Grab the lock and see if the device is available */ onenand_get_device(mtd, FL_ERASING); - if (region || instr->len < MB_ERASE_MIN_BLK_COUNT * block_size) { + if (ONENAND_IS_4KB_PAGE(this) || region || + instr->len < MB_ERASE_MIN_BLK_COUNT * block_size) { /* region is set for Flex-OneNAND (no mb erase) */ ret = onenand_block_by_block_erase(mtd, instr, region, block_size); -- cgit v1.2.1 From 75c52a49630a478ffe9c1473441779676817fce6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 11 Dec 2010 17:51:44 +0100 Subject: mtd: don't use flush_scheduled_work() flush_scheduled_work() is deprecated and scheduled to be removed. Directly flush cxt->work_{erase|write} on removal instead. Signed-off-by: Tejun Heo Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdoops.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c index 1ee72f3f0512..8b102736b34a 100644 --- a/drivers/mtd/mtdoops.c +++ b/drivers/mtd/mtdoops.c @@ -396,7 +396,8 @@ static void mtdoops_notify_remove(struct mtd_info *mtd) printk(KERN_WARNING "mtdoops: could not unregister kmsg_dumper\n"); cxt->mtd = NULL; - flush_scheduled_work(); + flush_work_sync(&cxt->work_erase); + flush_work_sync(&cxt->work_write); } -- cgit v1.2.1 From 7e95d1f1714cb993bc5b7e3a3d532b715b32d80a Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 14 Dec 2010 21:09:40 +0100 Subject: mtd: nand: ams-delta: convert to platform driver In its current form, the driver may interfere with different hardware on different boards if built into the kernel, hence is not suitable for inclusion into a defconfig, inteded to be usable with multiple OMAP1 cpu and machine types. Convert it to a platform driver, that should be free from this issue. Created and tested against linux-2.6.37-rc5 on Amstrad Delta. Signed-off-by: Janusz Krzysztofik Acked-by: Tony Lindgren Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/ams-delta.c | 31 ++++++++++++++++++++++++++----- 1 file changed, 26 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index 2548e1065bf8..7d49f6a6b726 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -4,6 +4,7 @@ * Copyright (C) 2006 Jonathan McDowell * * Derived from drivers/mtd/toto.c + * Converted to platform driver by Janusz Krzysztofik * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -151,7 +152,7 @@ static int ams_delta_nand_ready(struct mtd_info *mtd) /* * Main initialization routine */ -static int __init ams_delta_init(void) +static int __devinit ams_delta_init(struct platform_device *pdev) { struct nand_chip *this; int err = 0; @@ -219,20 +220,40 @@ static int __init ams_delta_init(void) return err; } -module_init(ams_delta_init); - /* * Clean up routine */ -static void __exit ams_delta_cleanup(void) +static int __devexit ams_delta_cleanup(struct platform_device *pdev) { /* Release resources, unregister device */ nand_release(ams_delta_mtd); /* Free the MTD device structure */ kfree(ams_delta_mtd); + + return 0; +} + +static struct platform_driver ams_delta_nand_driver = { + .probe = ams_delta_init, + .remove = __devexit_p(ams_delta_cleanup), + .driver = { + .name = "ams-delta-nand", + .owner = THIS_MODULE, + }, +}; + +static int __init ams_delta_nand_init(void) +{ + return platform_driver_register(&ams_delta_nand_driver); +} +module_init(ams_delta_nand_init); + +static void __exit ams_delta_nand_exit(void) +{ + platform_driver_unregister(&ams_delta_nand_driver); } -module_exit(ams_delta_cleanup); +module_exit(ams_delta_nand_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Jonathan McDowell "); -- cgit v1.2.1 From 0b524fb9314dc852d6a029296545ddbb17709a8b Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Sun, 12 Dec 2010 00:23:32 -0800 Subject: mtd: nand: choose correct chip name (ONFI bug) We have the order of the conditional wrong for choosing the ONFI chip name vs. the ID table name. Without this fix, we will almost *always* choose a NULL string to print out instead of the correct one. This has already been suggested by Matthieu Castet. Signed-off-by: Brian Norris Acked-by: Florian Fainelli Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 9c8da741dce0..c52ded31a12e 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -3157,7 +3157,7 @@ ident_done: printk(KERN_INFO "NAND device: Manufacturer ID:" " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id, nand_manuf_ids[maf_idx].name, - chip->onfi_version ? type->name : chip->onfi_params.model); + chip->onfi_version ? chip->onfi_params.model : type->name); return type; } -- cgit v1.2.1 From b7b1a29d94c17e4341856381bccb4d17495bea60 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Sun, 12 Dec 2010 00:23:33 -0800 Subject: mtd: nand: rearrange ONFI revision checking, add ONFI 2.3 In checking for the ONFI revision, the first conditional (for checking "unsupported" ONFI) seems unnecessary. All ONFI revisions should be backwards-compatible; even if this is not the case on some newer ONFI revision, it should simply fail the second version-checking if-else block (i.e., the bit-fields for 1.0, 2.0, etc. would not be set to 1). Thus, we move our "unsupported" condition after having checked each bit field. Also, it's simple enough to add a condition for ONFI revision 2.3. Note that this does *NOT* mean we handle all new features of ONFI versions above 1.0. Signed-off-by: Brian Norris Acked-by: Florian Fainelli Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index c52ded31a12e..5dd7ae4e4b23 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2865,20 +2865,24 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, /* check version */ val = le16_to_cpu(p->revision); - if (val == 1 || val > (1 << 4)) { - printk(KERN_INFO "%s: unsupported ONFI version: %d\n", - __func__, val); - return 0; - } - - if (val & (1 << 4)) + if (val & (1 << 5)) + chip->onfi_version = 23; + else if (val & (1 << 4)) chip->onfi_version = 22; else if (val & (1 << 3)) chip->onfi_version = 21; else if (val & (1 << 2)) chip->onfi_version = 20; - else + else if (val & (1 << 1)) chip->onfi_version = 10; + else + chip->onfi_version = 0; + + if (!chip->onfi_version) { + printk(KERN_INFO "%s: unsupported ONFI version: %d\n", + __func__, val); + return 0; + } sanitize_string(p->manufacturer, sizeof(p->manufacturer)); sanitize_string(p->model, sizeof(p->model)); -- cgit v1.2.1 From 263a8c8635445c0ede3cb22c98a1a12da4672ebc Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 30 Dec 2009 07:40:16 +0100 Subject: mtd: OneNAND: OMAP2/3: add support for command line partitioning Add the ability to parse MTD partition information from the kernel command line. Note that a pointless BUG_ON is removed, as are redundant calls to 'del_mtd_partitions()' and 'del_mtd_device()' because they are also done by 'onenand_release()'. Finally note that 'add_mtd_device()' returns 1 on failure so the error condition was incorrect. Signed-off-by: Adrian Hunter Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/onenand/omap2.c | 27 ++++++++++++--------------- 1 file changed, 12 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index da25a90af4a4..324402fcdedc 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -65,6 +65,10 @@ struct omap2_onenand { int (*setup)(void __iomem *base, int freq); }; +#ifdef CONFIG_MTD_PARTITIONS +static const char *part_probes[] = { "cmdlinepart", NULL, }; +#endif + static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data) { struct omap2_onenand *c = data; @@ -730,13 +734,15 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) } #ifdef CONFIG_MTD_PARTITIONS - if (pdata->parts != NULL) - r = add_mtd_partitions(&c->mtd, pdata->parts, - pdata->nr_parts); + r = parse_mtd_partitions(&c->mtd, part_probes, &c->parts, 0); + if (r > 0) + r = add_mtd_partitions(&c->mtd, c->parts, r); + else if (pdata->parts != NULL) + r = add_mtd_partitions(&c->mtd, pdata->parts, pdata->nr_parts); else #endif r = add_mtd_device(&c->mtd); - if (r < 0) + if (r) goto err_release_onenand; platform_set_drvdata(pdev, c); @@ -760,6 +766,7 @@ err_release_mem_region: err_free_cs: gpmc_cs_free(c->gpmc_cs); err_kfree: + kfree(c->parts); kfree(c); return r; @@ -769,17 +776,6 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) { struct omap2_onenand *c = dev_get_drvdata(&pdev->dev); - BUG_ON(c == NULL); - -#ifdef CONFIG_MTD_PARTITIONS - if (c->parts) - del_mtd_partitions(&c->mtd); - else - del_mtd_device(&c->mtd); -#else - del_mtd_device(&c->mtd); -#endif - onenand_release(&c->mtd); if (c->dma_channel != -1) omap_free_dma(c->dma_channel); @@ -792,6 +788,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) iounmap(c->onenand.base); release_mem_region(c->phys_base, ONENAND_IO_SIZE); gpmc_cs_free(c->gpmc_cs); + kfree(c->parts); kfree(c); return 0; -- cgit v1.2.1 From e0c1a921f62d22d1aa62c72ddb793f898945ff5a Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 10 Dec 2010 12:04:20 +0200 Subject: mtd: OneNAND: lighten scary initial bad block messages Initial bad blocks are normal but the messages look like errors. Make the messages less scary, make the main message an informational message not a warning, make the message displaying registers a debug message and include the address there instead of in the informational message. Signed-off-by: Adrian Hunter Acked-by: Kyungmin Park Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/onenand/onenand_base.c | 22 ++++++++++++---------- drivers/mtd/onenand/onenand_bbt.c | 4 ++-- 2 files changed, 14 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 88f23e3f3014..2d7c90de3144 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -1484,8 +1484,7 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state) { struct onenand_chip *this = mtd->priv; unsigned long timeout; - unsigned int interrupt; - unsigned int ctrl; + unsigned int interrupt, ctrl, ecc, addr1, addr8; /* The 20 msec is enough */ timeout = jiffies + msecs_to_jiffies(20); @@ -1497,25 +1496,28 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state) /* To get correct interrupt status in timeout case */ interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS); + addr1 = this->read_word(this->base + ONENAND_REG_START_ADDRESS1); + addr8 = this->read_word(this->base + ONENAND_REG_START_ADDRESS8); if (interrupt & ONENAND_INT_READ) { - int ecc = onenand_read_ecc(this); + ecc = onenand_read_ecc(this); if (ecc & ONENAND_ECC_2BIT_ALL) { - printk(KERN_WARNING "%s: ecc error = 0x%04x, " - "controller error 0x%04x\n", - __func__, ecc, ctrl); + printk(KERN_DEBUG "%s: ecc 0x%04x ctrl 0x%04x " + "intr 0x%04x addr1 %#x addr8 %#x\n", + __func__, ecc, ctrl, interrupt, addr1, addr8); return ONENAND_BBT_READ_ECC_ERROR; } } else { - printk(KERN_ERR "%s: read timeout! ctrl=0x%04x intr=0x%04x\n", - __func__, ctrl, interrupt); + printk(KERN_ERR "%s: read timeout! ctrl 0x%04x " + "intr 0x%04x addr1 %#x addr8 %#x\n", + __func__, ctrl, interrupt, addr1, addr8); return ONENAND_BBT_READ_FATAL_ERROR; } /* Initial bad block case: 0x2400 or 0x0400 */ if (ctrl & ONENAND_CTRL_ERROR) { - printk(KERN_DEBUG "%s: controller error = 0x%04x\n", - __func__, ctrl); + printk(KERN_DEBUG "%s: ctrl 0x%04x intr 0x%04x addr1 %#x " + "addr8 %#x\n", __func__, ctrl, interrupt, addr1, addr8); return ONENAND_BBT_READ_ERROR; } diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c index 905209bf9465..fc2c16a0fd1c 100644 --- a/drivers/mtd/onenand/onenand_bbt.c +++ b/drivers/mtd/onenand/onenand_bbt.c @@ -101,8 +101,8 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr if (ret || check_short_pattern(&buf[j * scanlen], scanlen, this->writesize, bd)) { bbm->bbt[i >> 3] |= 0x03 << (i & 0x6); - printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n", - i >> 1, (unsigned int) from); + printk(KERN_INFO "OneNAND eraseblock %d is an " + "initial bad block\n", i >> 1); mtd->ecc_stats.badblocks++; break; } -- cgit v1.2.1 From 494f45d55bf47d7130e8d9818e9a8965f6504462 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Wed, 15 Dec 2010 12:58:15 +0100 Subject: mtd: nand: ams-delta: select for built-in by default Now that the Amstrad Delta NAND driver is converted to a platform driver, which prevents it from interfering with other unrelated hardware in multiple OMAP1 cpu and machine configurations, it can be automatically configured for being built into the kernel if the Amstrad Delta board is also selected. Signed-off-by: Janusz Krzysztofik Signed-off-by: David Woodhouse --- drivers/mtd/nand/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 8229802b4346..c89592239bc7 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -96,6 +96,7 @@ config MTD_NAND_SPIA config MTD_NAND_AMS_DELTA tristate "NAND Flash device on Amstrad E3" depends on MACH_AMS_DELTA + default y help Support for NAND flash on Amstrad E3 (Delta). -- cgit v1.2.1 From dcf12463c3416b4a8fc84545233424df0a91e406 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 15 Dec 2010 12:59:32 +0100 Subject: mtd: m25p80: add debugging trace in sst_write Add a DEBUG(MTD_DEBUG_LEVEL2, ..) trace at beginning of sst_write() function as it is done in m25p80_write() function. Signed-off-by: Nicolas Ferre Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index eabe5fb071c6..9c59ff6b6926 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -497,6 +497,10 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, size_t actual; int cmd_sz, ret; + DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %zd\n", + dev_name(&flash->spi->dev), __func__, "to", + (u32)to, len); + *retlen = 0; /* sanity checks */ -- cgit v1.2.1 From eaca491f75af5afa9265a6bdfcbbfff6837634ab Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Wed, 15 Dec 2010 15:43:44 +0100 Subject: mtd: nand: ams-delta: drop omap_read/write, use ioremap There is a common requirement for not using OMAP specific omap_readw() / omap_writew() function calls in drivers/, but replace them with readw() / writew() on ioremap()ped addresses passed from arch/ instead. The patch implements this idea for the Amstrad Delta NAND driver. To be able to use the modified driver, the board file is updated with the platform device I/O resource declaration, which is passed from there. Created and tested against linux-2.6.37-rc5, on top of recent patch 'MTD: NAND: ams-delta: convert to platform driver'. Signed-off-by: Janusz Krzysztofik Acked-by: Tony Lindgren Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/ams-delta.c | 49 ++++++++++++++++++++++++++++++++++++++------ 1 file changed, 43 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index 7d49f6a6b726..a067d090cb31 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -5,6 +5,7 @@ * * Derived from drivers/mtd/toto.c * Converted to platform driver by Janusz Krzysztofik + * Partially stolen from drivers/mtd/nand/plat_nand.c * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -63,9 +64,10 @@ static struct mtd_partition partition_info[] = { static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte) { struct nand_chip *this = mtd->priv; + void __iomem *io_base = this->priv; - omap_writew(0, (OMAP1_MPUIO_BASE + OMAP_MPUIO_IO_CNTL)); - omap_writew(byte, this->IO_ADDR_W); + writew(0, io_base + OMAP_MPUIO_IO_CNTL); + writew(byte, this->IO_ADDR_W); ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE, 0); ndelay(40); ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NWE, @@ -76,11 +78,12 @@ static u_char ams_delta_read_byte(struct mtd_info *mtd) { u_char res; struct nand_chip *this = mtd->priv; + void __iomem *io_base = this->priv; ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE, 0); ndelay(40); - omap_writew(~0, (OMAP1_MPUIO_BASE + OMAP_MPUIO_IO_CNTL)); - res = omap_readw(this->IO_ADDR_R); + writew(~0, io_base + OMAP_MPUIO_IO_CNTL); + res = readw(this->IO_ADDR_R); ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NRE, AMS_DELTA_LATCH2_NAND_NRE); @@ -155,8 +158,13 @@ static int ams_delta_nand_ready(struct mtd_info *mtd) static int __devinit ams_delta_init(struct platform_device *pdev) { struct nand_chip *this; + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + void __iomem *io_base; int err = 0; + if (!res) + return -ENXIO; + /* Allocate memory for MTD device structure and private data */ ams_delta_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); @@ -178,9 +186,25 @@ static int __devinit ams_delta_init(struct platform_device *pdev) /* Link the private data with the MTD structure */ ams_delta_mtd->priv = this; + if (!request_mem_region(res->start, resource_size(res), + dev_name(&pdev->dev))) { + dev_err(&pdev->dev, "request_mem_region failed\n"); + err = -EBUSY; + goto out_free; + } + + io_base = ioremap(res->start, resource_size(res)); + if (io_base == NULL) { + dev_err(&pdev->dev, "ioremap failed\n"); + err = -EIO; + goto out_release_io; + } + + this->priv = io_base; + /* Set address of NAND IO lines */ - this->IO_ADDR_R = (OMAP1_MPUIO_BASE + OMAP_MPUIO_INPUT_LATCH); - this->IO_ADDR_W = (OMAP1_MPUIO_BASE + OMAP_MPUIO_OUTPUT); + this->IO_ADDR_R = io_base + OMAP_MPUIO_INPUT_LATCH; + this->IO_ADDR_W = io_base + OMAP_MPUIO_OUTPUT; this->read_byte = ams_delta_read_byte; this->write_buf = ams_delta_write_buf; this->read_buf = ams_delta_read_buf; @@ -196,6 +220,8 @@ static int __devinit ams_delta_init(struct platform_device *pdev) this->chip_delay = 30; this->ecc.mode = NAND_ECC_SOFT; + platform_set_drvdata(pdev, io_base); + /* Set chip enabled, but */ ams_delta_latch2_write(NAND_MASK, AMS_DELTA_LATCH2_NAND_NRE | AMS_DELTA_LATCH2_NAND_NWE | @@ -215,6 +241,11 @@ static int __devinit ams_delta_init(struct platform_device *pdev) goto out; out_mtd: + platform_set_drvdata(pdev, NULL); + iounmap(io_base); +out_release_io: + release_mem_region(res->start, resource_size(res)); +out_free: kfree(ams_delta_mtd); out: return err; @@ -225,9 +256,15 @@ static int __devinit ams_delta_init(struct platform_device *pdev) */ static int __devexit ams_delta_cleanup(struct platform_device *pdev) { + void __iomem *io_base = platform_get_drvdata(pdev); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + /* Release resources, unregister device */ nand_release(ams_delta_mtd); + iounmap(io_base); + release_mem_region(res->start, resource_size(res)); + /* Free the MTD device structure */ kfree(ams_delta_mtd); -- cgit v1.2.1 From e637276370cb11068ab185c342eac5a78e5415b4 Mon Sep 17 00:00:00 2001 From: Guillaume LECERF Date: Fri, 17 Dec 2010 10:59:41 +0100 Subject: mtd: cfi_cmdset_0002: add support for Samsung K8D6x16UxM NOR chips These chips report CFI v0.0 [1], so extend cfi_fixup_major_minor() to patch all Samsung chips from 0.0 to 1.0. Discussed and tested by the OpenWRT people [2]. [1] http://www.samsung.com/global/system/business/semiconductor/product/2007/6/11/NORFlash/64Mbit/K8D6316UTM/ds_K8D6x16UxM_rev16.pdf [2] https://dev.openwrt.org/ticket/7348 Signed-off-by: Guillaume LECERF Acked-by: Wolfram Sang Signed-off-by: David Woodhouse --- drivers/mtd/chips/cfi_cmdset_0002.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 9d68ab919f31..324fee4024a9 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -392,9 +392,19 @@ static struct cfi_fixup fixup_table[] = { static void cfi_fixup_major_minor(struct cfi_private *cfi, struct cfi_pri_amdstd *extp) { - if (cfi->mfr == CFI_MFR_SAMSUNG && cfi->id == 0x257e && - extp->MajorVersion == '0') - extp->MajorVersion = '1'; + if (cfi->mfr == CFI_MFR_SAMSUNG) { + if (extp->MajorVersion == '0' && extp->MinorVersion == '0') { + /* + * Samsung K8P2815UQB and K8D6x16UxM chips + * report major=0 / minor=0. + */ + printk(KERN_NOTICE " Fixing Samsung's Amd/Fujitsu" + " Extended Query version to 1.%c\n", + extp->MinorVersion); + extp->MajorVersion = '1'; + } + } + /* * SST 38VF640x chips report major=0xFF / minor=0xFF. */ -- cgit v1.2.1 From e8953b7395089b917f30d0909f845664d5fafa4e Mon Sep 17 00:00:00 2001 From: Guillaume LECERF Date: Fri, 17 Dec 2010 10:59:47 +0100 Subject: mtd: cfi_cmdset_0002: add support for Samsung K8D3x16UxC NOR chips These chips report CFI v3.3 [1], so patch them on the fly to the more correct v1.3. Discussed and tested by the OpenWRT people [2]. [1] http://www.samsung.com/global/system/business/semiconductor/product/2007/6/11/NORFlash/32Mbit/K8D3216UBC/ds_K8D3x16UxC_rev17.pdf [2] https://dev.openwrt.org/ticket/866 Signed-off-by: Guillaume LECERF Acked-by: Wolfram Sang Signed-off-by: David Woodhouse --- drivers/mtd/chips/cfi_cmdset_0002.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 324fee4024a9..a43ab45bdb18 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -393,10 +393,12 @@ static void cfi_fixup_major_minor(struct cfi_private *cfi, struct cfi_pri_amdstd *extp) { if (cfi->mfr == CFI_MFR_SAMSUNG) { - if (extp->MajorVersion == '0' && extp->MinorVersion == '0') { + if ((extp->MajorVersion == '0' && extp->MinorVersion == '0') || + (extp->MajorVersion == '3' && extp->MinorVersion == '3')) { /* * Samsung K8P2815UQB and K8D6x16UxM chips * report major=0 / minor=0. + * K8D3x16UxC chips report major=3 / minor=3. */ printk(KERN_NOTICE " Fixing Samsung's Amd/Fujitsu" " Extended Query version to 1.%c\n", -- cgit v1.2.1 From 24ac9a94f9e21ea71d877b0c80867d625b68bec2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ralf=20R=C3=B6sch?= Date: Thu, 30 Dec 2010 10:30:11 +0100 Subject: mtd: txx9ndfmc: limit transfer bytes to 512 (ECC provides 6 bytes max) See commit: c0cbfd0e81d879a950ba6f0df3f75ea30c5ab16e Using __nand_correct_data() helper function, this driver can read 512 byte (with 6 byte ECC) at a time. This is correct, but not more: With NAND chips providing page sizes > 512 Bytes chip->ecc.bytes are calculated > 6 in txx9ndfmc_nand_scan. According the data sheet there are (only) 6 bytes ECC available. After applying the patch a Hynix 512M*8 with 2KiB page size could be successfully formatted and used with an ubifs file system. Signed-off-by: Ralf Roesch Signed-off-by: Artem Bityutskiy Acked-by: Atsushi Nemoto Signed-off-by: David Woodhouse --- drivers/mtd/nand/txx9ndfmc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c index 054a41c0ef4a..ca270a4881a4 100644 --- a/drivers/mtd/nand/txx9ndfmc.c +++ b/drivers/mtd/nand/txx9ndfmc.c @@ -277,8 +277,9 @@ static int txx9ndfmc_nand_scan(struct mtd_info *mtd) ret = nand_scan_ident(mtd, 1, NULL); if (!ret) { if (mtd->writesize >= 512) { - chip->ecc.size = mtd->writesize; - chip->ecc.bytes = 3 * (mtd->writesize / 256); + /* Hardware ECC 6 byte ECC per 512 Byte data */ + chip->ecc.size = 512; + chip->ecc.bytes = 6; } ret = nand_scan_tail(mtd); } -- cgit v1.2.1 From 8fffed8cfdd511056cb17c70f525017fbb643b94 Mon Sep 17 00:00:00 2001 From: Aleksandr Koltsoff Date: Tue, 4 Jan 2011 10:42:35 +0200 Subject: mtd: m25p80: Fix JEDEC ID for AT26DF321 The last byte of the ID should be zero for this chip. Was added in commit d0e8c47c58575b9131e786edb488fd029eba443e . Reported by Tomi Varjo. Signed-off-by: Aleksandr Koltsoff Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 9c59ff6b6926..e4eba6cc1b2e 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -653,7 +653,7 @@ static const struct spi_device_id m25p_ids[] = { { "at26f004", INFO(0x1f0400, 0, 64 * 1024, 8, SECT_4K) }, { "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) }, { "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) }, - { "at26df321", INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) }, + { "at26df321", INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) }, /* EON -- en25pxx */ { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) }, -- cgit v1.2.1 From cf24dc85ff29a41abd8e73730e5feb22b2666bd3 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 19 Feb 2010 15:39:52 +0100 Subject: mtd: OneNAND: add enable / disable methods to onenand_chip Add enable / disable methods called from get_device() / release_device(). These can be used, for example, to allow the driver to prevent the voltage regulator from being put to sleep while OneNAND is in use. Signed-off-by: Adrian Hunter Signed-off-by: David Woodhouse --- drivers/mtd/onenand/onenand_base.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 2d7c90de3144..2edef5868ace 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -948,6 +948,8 @@ static int onenand_get_device(struct mtd_info *mtd, int new_state) if (this->state == FL_READY) { this->state = new_state; spin_unlock(&this->chip_lock); + if (new_state != FL_PM_SUSPENDED && this->enable) + this->enable(mtd); break; } if (new_state == FL_PM_SUSPENDED) { @@ -974,6 +976,8 @@ static void onenand_release_device(struct mtd_info *mtd) { struct onenand_chip *this = mtd->priv; + if (this->state != FL_PM_SUSPENDED && this->disable) + this->disable(mtd); /* Release the chip */ spin_lock(&this->chip_lock); this->state = FL_READY; -- cgit v1.2.1 From 9ac4e613a88d7f6a7a9651d863e9c8f63b582718 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 19 Feb 2010 15:39:53 +0100 Subject: mtd: OneNAND: OMAP2/3: prevent regulator sleeping while OneNAND is in use Prevent OneNAND's voltage regulator from going to sleep while OneNAND is in use, by explicitly enabling and disabling the regulator as appropriate. Signed-off-by: Adrian Hunter Signed-off-by: David Woodhouse --- drivers/mtd/onenand/omap2.c | 41 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 40 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 324402fcdedc..1a07bfcc70d4 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -63,6 +64,7 @@ struct omap2_onenand { int dma_channel; int freq; int (*setup)(void __iomem *base, int freq); + struct regulator *regulator; }; #ifdef CONFIG_MTD_PARTITIONS @@ -601,6 +603,30 @@ static void omap2_onenand_shutdown(struct platform_device *pdev) memset((__force void *)c->onenand.base, 0, ONENAND_BUFRAM_SIZE); } +static int omap2_onenand_enable(struct mtd_info *mtd) +{ + int ret; + struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); + + ret = regulator_enable(c->regulator); + if (ret != 0) + dev_err(&c->pdev->dev, "cant enable regulator\n"); + + return ret; +} + +static int omap2_onenand_disable(struct mtd_info *mtd) +{ + int ret; + struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); + + ret = regulator_disable(c->regulator); + if (ret != 0) + dev_err(&c->pdev->dev, "cant disable regulator\n"); + + return ret; +} + static int __devinit omap2_onenand_probe(struct platform_device *pdev) { struct omap_onenand_platform_data *pdata; @@ -715,8 +741,18 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) } } + if (pdata->regulator_can_sleep) { + c->regulator = regulator_get(&pdev->dev, "vonenand"); + if (IS_ERR(c->regulator)) { + dev_err(&pdev->dev, "Failed to get regulator\n"); + goto err_release_dma; + } + c->onenand.enable = omap2_onenand_enable; + c->onenand.disable = omap2_onenand_disable; + } + if ((r = onenand_scan(&c->mtd, 1)) < 0) - goto err_release_dma; + goto err_release_regulator; switch ((c->onenand.version_id >> 4) & 0xf) { case 0: @@ -751,6 +787,8 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) err_release_onenand: onenand_release(&c->mtd); +err_release_regulator: + regulator_put(c->regulator); err_release_dma: if (c->dma_channel != -1) omap_free_dma(c->dma_channel); @@ -777,6 +815,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) struct omap2_onenand *c = dev_get_drvdata(&pdev->dev); onenand_release(&c->mtd); + regulator_put(c->regulator); if (c->dma_channel != -1) omap_free_dma(c->dma_channel); omap2_onenand_shutdown(pdev); -- cgit v1.2.1 From d261c72ae03066dc4798c085e904f7dc996a10fb Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Thu, 16 Dec 2010 23:42:15 +0100 Subject: mtd: cfi: add writebufsize initialization Initialize mtd->writebufsize to the value obtained by CFI query command at probe time. Signed-off-by: Anatolij Gustschin Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/chips/cfi_cmdset_0001.c | 1 + drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++++ drivers/mtd/chips/cfi_cmdset_0020.c | 1 + 3 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 44cbfc093ecc..a8c3e1c9b02a 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -455,6 +455,7 @@ struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary) mtd->flags = MTD_CAP_NORFLASH; mtd->name = map->name; mtd->writesize = 1; + mtd->writebufsize = 1 << cfi->cfiq->MaxBufWriteSize; mtd->reboot_notifier.notifier_call = cfi_intelext_reboot; diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index a43ab45bdb18..f072fcfde04e 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -440,6 +440,10 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) mtd->flags = MTD_CAP_NORFLASH; mtd->name = map->name; mtd->writesize = 1; + mtd->writebufsize = 1 << cfi->cfiq->MaxBufWriteSize; + + DEBUG(MTD_DEBUG_LEVEL3, "MTD %s(): write buffer size %d\n", + __func__, mtd->writebufsize); mtd->reboot_notifier.notifier_call = cfi_amdstd_reboot; diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c index 314af1f5a370..c04b7658abe9 100644 --- a/drivers/mtd/chips/cfi_cmdset_0020.c +++ b/drivers/mtd/chips/cfi_cmdset_0020.c @@ -238,6 +238,7 @@ static struct mtd_info *cfi_staa_setup(struct map_info *map) mtd->resume = cfi_staa_resume; mtd->flags = MTD_CAP_NORFLASH & ~MTD_BIT_WRITEABLE; mtd->writesize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */ + mtd->writebufsize = 1 << cfi->cfiq->MaxBufWriteSize; map->fldrv = &cfi_staa_chipdrv; __module_get(THIS_MODULE); mtd->name = map->name; -- cgit v1.2.1 From cbcab65a17319246dc360f6b5fac5f7b474b9821 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Thu, 16 Dec 2010 23:42:16 +0100 Subject: mtd: nand: add mtd->writebufsize initialization Initialize mtd->writebufsize to be equal to mtd->writesize. Signed-off-by: Anatolij Gustschin Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 5dd7ae4e4b23..4915067379b8 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -3439,6 +3439,7 @@ int nand_scan_tail(struct mtd_info *mtd) mtd->resume = nand_resume; mtd->block_isbad = nand_block_isbad; mtd->block_markbad = nand_block_markbad; + mtd->writebufsize = mtd->writesize; /* propagate ecc.layout to mtd_info */ mtd->ecclayout = chip->ecc.layout; -- cgit v1.2.1 From 25dcd29786d3fbd5751dc3c5b8109d930ea2d312 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Thu, 16 Dec 2010 23:42:17 +0100 Subject: mtd: onenand: add mtd->writebufsize initialization Initialize mtd->writebufsize to be equal to mtd->writesize. Signed-off-by: Anatolij Gustschin Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/onenand/onenand_base.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 2edef5868ace..bac41caa8df7 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -4080,6 +4080,7 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) mtd->block_isbad = onenand_block_isbad; mtd->block_markbad = onenand_block_markbad; mtd->owner = THIS_MODULE; + mtd->writebufsize = mtd->writesize; /* Unlock whole block */ this->unlock_all(mtd); -- cgit v1.2.1 From 7fa33ac0a7e24a1b8bd71be5c47a17423c62fbda Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Thu, 16 Dec 2010 23:42:18 +0100 Subject: mtd: initialize writebufsize in the MTD object of a partition Propagate the writebufsize to the partition's MTD object so that UBI can set correct value for it's minimal I/O size using the writebufsize field of MTD object of the partition. By previous patches we added proper writebufsize field initialization. Next patch can now change UBI to use this field for setting the minimal I/O size. Signed-off-by: Anatolij Gustschin Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdconcat.c | 1 + drivers/mtd/mtdpart.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c index bf8de0943103..5f5777bd3f75 100644 --- a/drivers/mtd/mtdconcat.c +++ b/drivers/mtd/mtdconcat.c @@ -776,6 +776,7 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c concat->mtd.size = subdev[0]->size; concat->mtd.erasesize = subdev[0]->erasesize; concat->mtd.writesize = subdev[0]->writesize; + concat->mtd.writebufsize = subdev[0]->writebufsize; concat->mtd.subpage_sft = subdev[0]->subpage_sft; concat->mtd.oobsize = subdev[0]->oobsize; concat->mtd.oobavail = subdev[0]->oobavail; diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 1047ff0a4f55..b910a37baed8 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -384,6 +384,7 @@ static struct mtd_part *allocate_partition(struct mtd_info *master, slave->mtd.flags = master->flags & ~part->mask_flags; slave->mtd.size = part->size; slave->mtd.writesize = master->writesize; + slave->mtd.writebufsize = master->writebufsize; slave->mtd.oobsize = master->oobsize; slave->mtd.oobavail = master->oobavail; slave->mtd.subpage_sft = master->subpage_sft; -- cgit v1.2.1 From a121f643993474548fe98144514c50dd4f3dbe76 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Thu, 16 Dec 2010 23:42:19 +0100 Subject: UBI: use mtd->writebufsize to set minimal I/O unit size Previously we used mtd->writesize field to set UBI's minimal I/O unit size. This sometimes caused UBIFS recovery issues when mounting an uncleanly unmounted UBIFS partition on NOR flash since mtd->writesize is 1 byte for NOR flash. The MTD CFI driver however often performs writing multiple bytes in one programming operation using the chip's write buffer. We have to use the size of this write buffer as a minimal I/O unit size for UBI on NOR flash to fix the observed UBIFS recovery issues. Signed-off-by: Anatolij Gustschin Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/ubi/build.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 5ebe280225d6..f49e49dc5928 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -672,7 +672,33 @@ static int io_init(struct ubi_device *ubi) ubi->nor_flash = 1; } - ubi->min_io_size = ubi->mtd->writesize; + /* + * Set UBI min. I/O size (@ubi->min_io_size). We use @mtd->writebufsize + * for these purposes, not @mtd->writesize. At the moment this does not + * matter for NAND, because currently @mtd->writebufsize is equivalent to + * @mtd->writesize for all NANDs. However, some CFI NOR flashes may + * have @mtd->writebufsize which is multiple of @mtd->writesize. + * + * The reason we use @mtd->writebufsize for @ubi->min_io_size is that + * UBI and UBIFS recovery algorithms rely on the fact that if there was + * an unclean power cut, then we can find offset of the last corrupted + * node, align the offset to @ubi->min_io_size, read the rest of the + * eraseblock starting from this offset, and check whether there are + * only 0xFF bytes. If yes, then we are probably dealing with a + * corruption caused by a power cut, if not, then this is probably some + * severe corruption. + * + * Thus, we have to use the maximum write unit size of the flash, which + * is @mtd->writebufsize, because @mtd->writesize is the minimum write + * size, not the maximum. + */ + if (ubi->mtd->type == MTD_NANDFLASH) + ubi_assert(ubi->mtd->writebufsize == ubi->mtd->writesize); + else if (ubi->mtd->type == MTD_NORFLASH) + ubi_assert(ubi->mtd->writebufsize % ubi->mtd->writesize == 0); + + ubi->min_io_size = ubi->mtd->writebufsize; + ubi->hdrs_min_io_size = ubi->mtd->writesize >> ubi->mtd->subpage_sft; /* -- cgit v1.2.1 From 52d039fdaa78c5a9f9bc2940ad58d7ed76b8336d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 6 Jan 2011 17:05:36 +0300 Subject: mtd: pxa3xx_nand: NULL dereference in pxa3xx_nand_probe "info->cmdset" gets dereferenced in __readid() so it needs to be initialized earlier in the function. This bug was introduced in 18c81b1828f8 "mtd: pxa3xx_nand: remove the flash info in driver structure". Cc: stable@kernel.org [2.6.37+] Reported-and-tested-by: Sven Neumann Signed-off-by: Dan Carpenter Signed-off-by: David Woodhouse --- drivers/mtd/nand/pxa3xx_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 17f8518cc5eb..ea2c288df3f6 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -885,6 +885,7 @@ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info) /* set info fields needed to __readid */ info->read_id_bytes = (info->page_size == 2048) ? 4 : 2; info->reg_ndcr = ndcr; + info->cmdset = &default_cmdset; if (__readid(info, &id)) return -ENODEV; @@ -915,7 +916,6 @@ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info) info->ndtr0cs0 = nand_readl(info, NDTR0CS0); info->ndtr1cs0 = nand_readl(info, NDTR1CS0); - info->cmdset = &default_cmdset; return 0; } -- cgit v1.2.1 From 26fcaf60fe3861409eb4c455c5c0d0f00f599b08 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 7 Jan 2011 01:42:31 +0100 Subject: PM: Fix oops in suspend/hibernate code related to failing ioremap() When ioremap() fails (which might happen for some reason), we nicely oops in suspend_nvs_save() due to NULL dereference by memcpy() in there. Fail gracefully instead. Signed-off-by: Jiri Slaby Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/sleep.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index febb153b5a68..d8bca6c90719 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -124,8 +124,7 @@ static int acpi_pm_freeze(void) static int acpi_pm_pre_suspend(void) { acpi_pm_freeze(); - suspend_nvs_save(); - return 0; + return suspend_nvs_save(); } /** @@ -151,7 +150,7 @@ static int acpi_pm_prepare(void) { int error = __acpi_pm_prepare(); if (!error) - acpi_pm_pre_suspend(); + error = acpi_pm_pre_suspend(); return error; } -- cgit v1.2.1 From 976513dbfc1547c7b1822566923058655f0c32fd Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 7 Jan 2011 01:43:44 +0100 Subject: PM / ACPI: Move NVS saving and restoring code to drivers/acpi The saving of the ACPI NVS area during hibernation and suspend and restoring it during the subsequent resume is entirely specific to ACPI, so move it to drivers/acpi and drop the CONFIG_SUSPEND_NVS configuration option which is redundant. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/Makefile | 2 +- drivers/acpi/internal.h | 8 +++ drivers/acpi/nvs.c | 142 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 151 insertions(+), 1 deletion(-) create mode 100644 drivers/acpi/nvs.c (limited to 'drivers') diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 3d031d02e54b..9cc9f2c4da79 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -24,7 +24,7 @@ acpi-y += atomicio.o # sleep related files acpi-y += wakeup.o acpi-y += sleep.o -acpi-$(CONFIG_ACPI_SLEEP) += proc.o +acpi-$(CONFIG_ACPI_SLEEP) += proc.o nvs.o # diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index a212bfeddf8c..7c23b76e8eca 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -82,8 +82,16 @@ extern int acpi_sleep_init(void); #ifdef CONFIG_ACPI_SLEEP int acpi_sleep_proc_init(void); +int suspend_nvs_alloc(void); +void suspend_nvs_free(void); +int suspend_nvs_save(void); +void suspend_nvs_restore(void); #else static inline int acpi_sleep_proc_init(void) { return 0; } +static inline int suspend_nvs_alloc(void) { return 0; } +static inline void suspend_nvs_free(void) {} +static inline int suspend_nvs_save(void) {} +static inline void suspend_nvs_restore(void) {} #endif #endif /* _ACPI_INTERNAL_H_ */ diff --git a/drivers/acpi/nvs.c b/drivers/acpi/nvs.c new file mode 100644 index 000000000000..57c6fabbb6b6 --- /dev/null +++ b/drivers/acpi/nvs.c @@ -0,0 +1,142 @@ +/* + * linux/kernel/power/hibernate_nvs.c - Routines for handling NVS memory + * + * Copyright (C) 2008,2009 Rafael J. Wysocki , Novell Inc. + * + * This file is released under the GPLv2. + */ + +#include +#include +#include +#include +#include +#include + +/* + * Platforms, like ACPI, may want us to save some memory used by them during + * suspend and to restore the contents of this memory during the subsequent + * resume. The code below implements a mechanism allowing us to do that. + */ + +struct nvs_page { + unsigned long phys_start; + unsigned int size; + void *kaddr; + void *data; + struct list_head node; +}; + +static LIST_HEAD(nvs_list); + +/** + * suspend_nvs_register - register platform NVS memory region to save + * @start - physical address of the region + * @size - size of the region + * + * The NVS region need not be page-aligned (both ends) and we arrange + * things so that the data from page-aligned addresses in this region will + * be copied into separate RAM pages. + */ +int suspend_nvs_register(unsigned long start, unsigned long size) +{ + struct nvs_page *entry, *next; + + while (size > 0) { + unsigned int nr_bytes; + + entry = kzalloc(sizeof(struct nvs_page), GFP_KERNEL); + if (!entry) + goto Error; + + list_add_tail(&entry->node, &nvs_list); + entry->phys_start = start; + nr_bytes = PAGE_SIZE - (start & ~PAGE_MASK); + entry->size = (size < nr_bytes) ? size : nr_bytes; + + start += entry->size; + size -= entry->size; + } + return 0; + + Error: + list_for_each_entry_safe(entry, next, &nvs_list, node) { + list_del(&entry->node); + kfree(entry); + } + return -ENOMEM; +} + +/** + * suspend_nvs_free - free data pages allocated for saving NVS regions + */ +void suspend_nvs_free(void) +{ + struct nvs_page *entry; + + list_for_each_entry(entry, &nvs_list, node) + if (entry->data) { + free_page((unsigned long)entry->data); + entry->data = NULL; + if (entry->kaddr) { + iounmap(entry->kaddr); + entry->kaddr = NULL; + } + } +} + +/** + * suspend_nvs_alloc - allocate memory necessary for saving NVS regions + */ +int suspend_nvs_alloc(void) +{ + struct nvs_page *entry; + + list_for_each_entry(entry, &nvs_list, node) { + entry->data = (void *)__get_free_page(GFP_KERNEL); + if (!entry->data) { + suspend_nvs_free(); + return -ENOMEM; + } + } + return 0; +} + +/** + * suspend_nvs_save - save NVS memory regions + */ +int suspend_nvs_save(void) +{ + struct nvs_page *entry; + + printk(KERN_INFO "PM: Saving platform NVS memory\n"); + + list_for_each_entry(entry, &nvs_list, node) + if (entry->data) { + entry->kaddr = ioremap(entry->phys_start, entry->size); + if (!entry->kaddr) { + suspend_nvs_free(); + return -ENOMEM; + } + memcpy(entry->data, entry->kaddr, entry->size); + } + + return 0; +} + +/** + * suspend_nvs_restore - restore NVS memory regions + * + * This function is going to be called with interrupts disabled, so it + * cannot iounmap the virtual addresses used to access the NVS region. + */ +void suspend_nvs_restore(void) +{ + struct nvs_page *entry; + + printk(KERN_INFO "PM: Restoring platform NVS memory\n"); + + list_for_each_entry(entry, &nvs_list, node) + if (entry->data) + memcpy(entry->kaddr, entry->data, entry->size); +} -- cgit v1.2.1 From d146df18c13d16e321efa8ef9b57c95c3bec1722 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 7 Jan 2011 01:44:28 +0100 Subject: ACPI / PM: Update file information and the list of includes in nvs.c The file information and the list of include in drivers/acpi/nvs.c are outdated, so update them. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/nvs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/nvs.c b/drivers/acpi/nvs.c index 57c6fabbb6b6..7d648092427e 100644 --- a/drivers/acpi/nvs.c +++ b/drivers/acpi/nvs.c @@ -1,7 +1,7 @@ /* - * linux/kernel/power/hibernate_nvs.c - Routines for handling NVS memory + * nvs.c - Routines for saving and restoring ACPI NVS memory region * - * Copyright (C) 2008,2009 Rafael J. Wysocki , Novell Inc. + * Copyright (C) 2008-2011 Rafael J. Wysocki , Novell Inc. * * This file is released under the GPLv2. */ @@ -11,7 +11,7 @@ #include #include #include -#include +#include /* * Platforms, like ACPI, may want us to save some memory used by them during -- cgit v1.2.1 From ca9b600be38c73b7d25acfb8b7e4e9a9e941d881 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 7 Jan 2011 01:45:58 +0100 Subject: ACPI / PM: Make suspend_nvs_save() use acpi_os_map_memory() It turns out that the NVS memory region that suspend_nvs_save() attempts to map has been already mapped by acpi_os_map_memory(), so suspend_nvs_save() should better use acpi_os_map_memory() for mapping memory to avoid conflicts. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/nvs.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/nvs.c b/drivers/acpi/nvs.c index 7d648092427e..54b6ab8040a6 100644 --- a/drivers/acpi/nvs.c +++ b/drivers/acpi/nvs.c @@ -12,6 +12,7 @@ #include #include #include +#include /* * Platforms, like ACPI, may want us to save some memory used by them during @@ -79,7 +80,7 @@ void suspend_nvs_free(void) free_page((unsigned long)entry->data); entry->data = NULL; if (entry->kaddr) { - iounmap(entry->kaddr); + acpi_os_unmap_memory(entry->kaddr, entry->size); entry->kaddr = NULL; } } @@ -113,7 +114,8 @@ int suspend_nvs_save(void) list_for_each_entry(entry, &nvs_list, node) if (entry->data) { - entry->kaddr = ioremap(entry->phys_start, entry->size); + entry->kaddr = acpi_os_map_memory(entry->phys_start, + entry->size); if (!entry->kaddr) { suspend_nvs_free(); return -ENOMEM; -- cgit v1.2.1 From 6d5bbf00d251cc73223a71422d69e069dc2e0b8d Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 7 Jan 2011 01:46:40 +0100 Subject: ACPI: Use ioremap_cache() Although the temporary boot-time ACPI table mappings were set up with CPU caching enabled, the permanent table mappings and AML run-time region memory accesses were set up with ioremap(), which on x86 is a synonym for ioremap_nocache(). Changing this to ioremap_cache() improves performance as seen when accessing the tables via acpidump, or /sys/firmware/acpi/tables. It should also improve AML run-time performance. No change on ia64. Reported-by: Jack Steiner Signed-off-by: Len Brown Signed-off-by: Rafael J. Wysocki --- drivers/acpi/osl.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 055d7b701fff..3a7b4879fd99 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -320,7 +320,7 @@ acpi_os_map_memory(acpi_physical_address phys, acpi_size size) pg_off = round_down(phys, PAGE_SIZE); pg_sz = round_up(phys + size, PAGE_SIZE) - pg_off; - virt = ioremap(pg_off, pg_sz); + virt = ioremap_cache(pg_off, pg_sz); if (!virt) { kfree(map); return NULL; @@ -642,7 +642,7 @@ acpi_os_read_memory(acpi_physical_address phys_addr, u32 * value, u32 width) virt_addr = acpi_map_vaddr_lookup(phys_addr, size); rcu_read_unlock(); if (!virt_addr) { - virt_addr = ioremap(phys_addr, size); + virt_addr = ioremap_cache(phys_addr, size); unmap = 1; } if (!value) @@ -678,7 +678,7 @@ acpi_os_write_memory(acpi_physical_address phys_addr, u32 value, u32 width) virt_addr = acpi_map_vaddr_lookup(phys_addr, size); rcu_read_unlock(); if (!virt_addr) { - virt_addr = ioremap(phys_addr, size); + virt_addr = ioremap_cache(phys_addr, size); unmap = 1; } -- cgit v1.2.1 From 9cd031441a4fd09273b7c2beb337d0b2683d104c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 6 Jan 2011 23:32:23 +0100 Subject: ACPI / ACPICA: Fix global lock acquisition There are two problems with the ACPICA's current implementation of the global lock acquisition. First, acpi_ev_global_lock_handler(), which in fact is an interface to the outside of the kernel, doesn't validate its input, so it only works correctly if the other side (i.e. the ACPI firmware) is fully specification-compliant (as far as the global lock is concerned). Unfortunately, that's known not to be the case on some systems (i.e. we get spurious global lock signaling interrupts without the pending flag set on some systems). Second, acpi_ev_global_lock_handler() attempts to acquire the global lock on behalf of a thread waiting for it without checking if there actually is such a thread. Both of these shortcomings need to be addressed to prevent all possible race conditions from happening. Rework acpi_ev_global_lock_handler() so that it doesn't try to acquire the global lock and make it signal the availability of the global lock to the waiting thread instead. Make sure that the availability of the global lock can only be signaled when there is a thread waiting for it and that it can't be signaled more than once in a row (to keep acpi_gbl_global_lock_semaphore in balance). Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/acpica/evmisc.c | 94 ++++++++++++++++++++++++++------------------ 1 file changed, 55 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index fcaed9fb44ff..8e31bb5a973a 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -284,41 +284,41 @@ static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context) * RETURN: ACPI_INTERRUPT_HANDLED * * DESCRIPTION: Invoked directly from the SCI handler when a global lock - * release interrupt occurs. Attempt to acquire the global lock, - * if successful, signal the thread waiting for the lock. + * release interrupt occurs. If there's a thread waiting for + * the global lock, signal it. * * NOTE: Assumes that the semaphore can be signaled from interrupt level. If * this is not possible for some reason, a separate thread will have to be * scheduled to do this. * ******************************************************************************/ +static u8 acpi_ev_global_lock_pending; +static spinlock_t _acpi_ev_global_lock_pending_lock; +#define acpi_ev_global_lock_pending_lock &_acpi_ev_global_lock_pending_lock static u32 acpi_ev_global_lock_handler(void *context) { - u8 acquired = FALSE; + acpi_status status; + acpi_cpu_flags flags; - /* - * Attempt to get the lock. - * - * If we don't get it now, it will be marked pending and we will - * take another interrupt when it becomes free. - */ - ACPI_ACQUIRE_GLOBAL_LOCK(acpi_gbl_FACS, acquired); - if (acquired) { + flags = acpi_os_acquire_lock(acpi_ev_global_lock_pending_lock); - /* Got the lock, now wake all threads waiting for it */ + if (!acpi_ev_global_lock_pending) { + goto out; + } - acpi_gbl_global_lock_acquired = TRUE; - /* Send a unit to the semaphore */ + /* Send a unit to the semaphore */ - if (ACPI_FAILURE - (acpi_os_signal_semaphore - (acpi_gbl_global_lock_semaphore, 1))) { - ACPI_ERROR((AE_INFO, - "Could not signal Global Lock semaphore")); - } + status = acpi_os_signal_semaphore(acpi_gbl_global_lock_semaphore, 1); + if (ACPI_FAILURE(status)) { + ACPI_ERROR((AE_INFO, "Could not signal Global Lock semaphore")); } + acpi_ev_global_lock_pending = FALSE; + + out: + acpi_os_release_lock(acpi_ev_global_lock_pending_lock, flags); + return (ACPI_INTERRUPT_HANDLED); } @@ -415,6 +415,7 @@ static int acpi_ev_global_lock_acquired; acpi_status acpi_ev_acquire_global_lock(u16 timeout) { + acpi_cpu_flags flags; acpi_status status = AE_OK; u8 acquired = FALSE; @@ -467,32 +468,47 @@ acpi_status acpi_ev_acquire_global_lock(u16 timeout) return_ACPI_STATUS(AE_OK); } - /* Attempt to acquire the actual hardware lock */ + flags = acpi_os_acquire_lock(acpi_ev_global_lock_pending_lock); + + do { + + /* Attempt to acquire the actual hardware lock */ + + ACPI_ACQUIRE_GLOBAL_LOCK(acpi_gbl_FACS, acquired); + if (acquired) { + acpi_gbl_global_lock_acquired = TRUE; + + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "Acquired hardware Global Lock\n")); + break; + } - ACPI_ACQUIRE_GLOBAL_LOCK(acpi_gbl_FACS, acquired); - if (acquired) { + acpi_ev_global_lock_pending = TRUE; - /* We got the lock */ + acpi_os_release_lock(acpi_ev_global_lock_pending_lock, flags); + /* + * Did not get the lock. The pending bit was set above, and we + * must wait until we get the global lock released interrupt. + */ ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "Acquired hardware Global Lock\n")); + "Waiting for hardware Global Lock\n")); - acpi_gbl_global_lock_acquired = TRUE; - return_ACPI_STATUS(AE_OK); - } + /* + * Wait for handshake with the global lock interrupt handler. + * This interface releases the interpreter if we must wait. + */ + status = acpi_ex_system_wait_semaphore( + acpi_gbl_global_lock_semaphore, + ACPI_WAIT_FOREVER); - /* - * Did not get the lock. The pending bit was set above, and we must now - * wait until we get the global lock released interrupt. - */ - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Waiting for hardware Global Lock\n")); + flags = acpi_os_acquire_lock(acpi_ev_global_lock_pending_lock); - /* - * Wait for handshake with the global lock interrupt handler. - * This interface releases the interpreter if we must wait. - */ - status = acpi_ex_system_wait_semaphore(acpi_gbl_global_lock_semaphore, - ACPI_WAIT_FOREVER); + } while (ACPI_SUCCESS(status)); + + acpi_ev_global_lock_pending = FALSE; + + acpi_os_release_lock(acpi_ev_global_lock_pending_lock, flags); return_ACPI_STATUS(status); } -- cgit v1.2.1 From b014f4f1aad3f25d5c7d877a394869645ea0c96b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 6 Jan 2011 23:33:30 +0100 Subject: ACPI / PM: Do not enable multiple devices to wake up simultaneously If a device is enabled to wake up the system from sleep states via /proc/acpi/wakeup and there are other devices associated with the same wakeup GPE, all of these devices are automatically enabled to wake up the system. This isn't correct, because the fact the GPE is shared need not imply that wakeup power has to be enabled for all the devices at the same time (i.e. it is possible that one device will have its wakeup power enabled and it will wake up the system from a sleep state if the shared wakeup GPE is enabled, while another device having its wakeup power disabled will not wake up the system even though the GPE is enabled). Rework acpi_system_write_wakeup_device() so that it only enables wakeup for one device at a time. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/proc.c | 26 +------------------------- 1 file changed, 1 insertion(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c index afad67769db6..129effbb7bd4 100644 --- a/drivers/acpi/proc.c +++ b/drivers/acpi/proc.c @@ -341,7 +341,6 @@ acpi_system_write_wakeup_device(struct file *file, char strbuf[5]; char str[5] = ""; unsigned int len = count; - struct acpi_device *found_dev = NULL; if (len > 4) len = 4; @@ -363,33 +362,10 @@ acpi_system_write_wakeup_device(struct file *file, if (!strncmp(dev->pnp.bus_id, str, 4)) { dev->wakeup.state.enabled = dev->wakeup.state.enabled ? 0 : 1; - found_dev = dev; + physical_device_enable_wakeup(dev); break; } } - if (found_dev) { - physical_device_enable_wakeup(found_dev); - list_for_each_safe(node, next, &acpi_wakeup_device_list) { - struct acpi_device *dev = container_of(node, - struct - acpi_device, - wakeup_list); - - if ((dev != found_dev) && - (dev->wakeup.gpe_number == - found_dev->wakeup.gpe_number) - && (dev->wakeup.gpe_device == - found_dev->wakeup.gpe_device)) { - printk(KERN_WARNING - "ACPI: '%s' and '%s' have the same GPE, " - "can't disable/enable one separately\n", - dev->pnp.bus_id, found_dev->pnp.bus_id); - dev->wakeup.state.enabled = - found_dev->wakeup.state.enabled; - physical_device_enable_wakeup(dev); - } - } - } mutex_unlock(&acpi_device_lock); return count; } -- cgit v1.2.1 From f2b56bc808addb908a5bf435d9b942c02af9a7c4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 6 Jan 2011 23:34:22 +0100 Subject: ACPI / PM: Use device wakeup flags for handling ACPI wakeup devices There are ACPI devices (buttons and the laptop lid) that can wake up the system from sleep states and have no "physical" companion devices. The ACPI subsystem uses two flags, wakeup.state.enabled and wakeup.flags.always_enabled, for handling those devices, but they are not accessible through the standard device wakeup infrastructure. User space can only control them via the /proc/acpi/wakeup interface that is not really convenient (e.g. the way in which devices are enabled to wake up the system is not portable between different systems, because it requires one to know the devices' "names" used in the system's ACPI tables). To address this problem, use standard device wakeup flags instead of the special ACPI flags for handling those devices. In particular, use device_set_wakeup_capable() to mark the ACPI wakeup devices during initialization and use device_set_wakeup_enable() to allow or disallow them to wake up the system from sleep states. Rework the /proc/acpi/wakeup interface to take these changes into account. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/button.c | 4 ++-- drivers/acpi/proc.c | 19 +++++++++++++------ drivers/acpi/scan.c | 2 +- drivers/acpi/wakeup.c | 18 ++++++++++-------- 4 files changed, 26 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 71ef9cd0735f..234c104fcdd8 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -426,7 +426,7 @@ static int acpi_button_add(struct acpi_device *device) acpi_enable_gpe(device->wakeup.gpe_device, device->wakeup.gpe_number); device->wakeup.run_wake_count++; - device->wakeup.state.enabled = 1; + device_set_wakeup_enable(&device->dev, true); } printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device)); @@ -449,7 +449,7 @@ static int acpi_button_remove(struct acpi_device *device, int type) acpi_disable_gpe(device->wakeup.gpe_device, device->wakeup.gpe_number); device->wakeup.run_wake_count--; - device->wakeup.state.enabled = 0; + device_set_wakeup_enable(&device->dev, false); } acpi_button_remove_fs(device); diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c index 129effbb7bd4..f5f986991b52 100644 --- a/drivers/acpi/proc.c +++ b/drivers/acpi/proc.c @@ -311,7 +311,9 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) dev->pnp.bus_id, (u32) dev->wakeup.sleep_state, dev->wakeup.flags.run_wake ? '*' : ' ', - dev->wakeup.state.enabled ? "enabled" : "disabled"); + (device_may_wakeup(&dev->dev) + || (ldev && device_may_wakeup(ldev))) ? + "enabled" : "disabled"); if (ldev) seq_printf(seq, "%s:%s", ldev->bus ? ldev->bus->name : "no-bus", @@ -328,8 +330,10 @@ static void physical_device_enable_wakeup(struct acpi_device *adev) { struct device *dev = acpi_get_physical_device(adev->handle); - if (dev && device_can_wakeup(dev)) - device_set_wakeup_enable(dev, adev->wakeup.state.enabled); + if (dev && device_can_wakeup(dev)) { + bool enable = !device_may_wakeup(dev); + device_set_wakeup_enable(dev, enable); + } } static ssize_t @@ -360,9 +364,12 @@ acpi_system_write_wakeup_device(struct file *file, continue; if (!strncmp(dev->pnp.bus_id, str, 4)) { - dev->wakeup.state.enabled = - dev->wakeup.state.enabled ? 0 : 1; - physical_device_enable_wakeup(dev); + if (device_can_wakeup(&dev->dev)) { + bool enable = !device_may_wakeup(&dev->dev); + device_set_wakeup_enable(&dev->dev, enable); + } else { + physical_device_enable_wakeup(dev); + } break; } } diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 29ef505c487b..bf7acbff1f5f 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -803,7 +803,7 @@ static void acpi_bus_set_run_wake_flags(struct acpi_device *device) /* Power button, Lid switch always enable wakeup */ if (!acpi_match_device_ids(device, button_device_ids)) { device->wakeup.flags.run_wake = 1; - device->wakeup.flags.always_enabled = 1; + device_set_wakeup_capable(&device->dev, true); return; } diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c index f62a50c3ed34..f252d0de9922 100644 --- a/drivers/acpi/wakeup.c +++ b/drivers/acpi/wakeup.c @@ -37,11 +37,12 @@ void acpi_enable_wakeup_devices(u8 sleep_state) container_of(node, struct acpi_device, wakeup_list); if (!dev->wakeup.flags.valid - || !(dev->wakeup.state.enabled || dev->wakeup.prepare_count) - || sleep_state > (u32) dev->wakeup.sleep_state) + || sleep_state > (u32) dev->wakeup.sleep_state + || !(device_may_wakeup(&dev->dev) + || dev->wakeup.prepare_count)) continue; - if (dev->wakeup.state.enabled) + if (device_may_wakeup(&dev->dev)) acpi_enable_wakeup_device_power(dev, sleep_state); /* The wake-up power should have been enabled already. */ @@ -63,14 +64,15 @@ void acpi_disable_wakeup_devices(u8 sleep_state) container_of(node, struct acpi_device, wakeup_list); if (!dev->wakeup.flags.valid - || !(dev->wakeup.state.enabled || dev->wakeup.prepare_count) - || (sleep_state > (u32) dev->wakeup.sleep_state)) + || sleep_state > (u32) dev->wakeup.sleep_state + || !(device_may_wakeup(&dev->dev) + || dev->wakeup.prepare_count)) continue; acpi_gpe_wakeup(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_GPE_DISABLE); - if (dev->wakeup.state.enabled) + if (device_may_wakeup(&dev->dev)) acpi_disable_wakeup_device_power(dev); } } @@ -84,8 +86,8 @@ int __init acpi_wakeup_device_init(void) struct acpi_device *dev = container_of(node, struct acpi_device, wakeup_list); - if (dev->wakeup.flags.always_enabled) - dev->wakeup.state.enabled = 1; + if (device_can_wakeup(&dev->dev)) + device_set_wakeup_enable(&dev->dev, true); } mutex_unlock(&acpi_device_lock); return 0; -- cgit v1.2.1 From 7fa69baf29de8c77a6b32c054df2abb8f11f8aa4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 6 Jan 2011 23:35:10 +0100 Subject: ACPI / PM: Drop special ACPI wakeup flags Drop special ACPI wakeup flags, wakeup.state.enabled and wakeup.flags.always_enabled, that aren't necessary any more after we've started to use standard device wakeup flags for handling ACPI wakeup devices. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/glue.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 78b0164c35b2..7c47ed55e528 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -167,11 +167,8 @@ static int acpi_bind_one(struct device *dev, acpi_handle handle) "firmware_node"); ret = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj, "physical_node"); - if (acpi_dev->wakeup.flags.valid) { + if (acpi_dev->wakeup.flags.valid) device_set_wakeup_capable(dev, true); - device_set_wakeup_enable(dev, - acpi_dev->wakeup.state.enabled); - } } return 0; -- cgit v1.2.1 From 1f83511bd8f44b8a9e2d82263b2c95f26a625fcc Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 6 Jan 2011 23:36:01 +0100 Subject: ACPI / PM: Report wakeup events from buttons Since ACPI buttons and lids can be configured to wake up the system from sleep states, report wakeup events from these devices. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/button.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 234c104fcdd8..76bbb78a5ad9 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -279,6 +279,9 @@ static int acpi_lid_send_state(struct acpi_device *device) input_report_switch(button->input, SW_LID, !state); input_sync(button->input); + if (state) + pm_wakeup_event(&device->dev, 0); + ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, device); if (ret == NOTIFY_DONE) ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, @@ -314,6 +317,8 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) input_sync(input); input_report_key(input, keycode, 0); input_sync(input); + + pm_wakeup_event(&device->dev, 0); } acpi_bus_generate_proc_event(device, event, ++button->pushed); -- cgit v1.2.1 From 7b330707dddab1ad772898c1c82516342a551173 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 6 Jan 2011 23:37:01 +0100 Subject: ACPI / PM: Blacklist Averatec machine known to require acpi_sleep=nonvs Apparently, Averatec AV1020-ED2 does not resume correctly without acpi_sleep=nonvs, so add it to the ACPI sleep blacklist. References: https://bugzilla.kernel.org/show_bug.cgi?id=16396#c86 Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/sleep.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index febb153b5a68..ddc5cce508a1 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -435,6 +435,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"), }, }, + { + .callback = init_nvs_nosave, + .ident = "Averatec AV1020-ED2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"), + DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"), + }, + }, {}, }; #endif /* CONFIG_SUSPEND */ -- cgit v1.2.1 From 0174b0c30a9de25dcb0d3049defcfad0c2947a36 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 10 Jan 2011 10:03:20 +0200 Subject: vhost: fix signed/unsigned comparison To detect that a sequence number is done, we are doing math on unsigned integers so the result is unsigned too. Not what was intended for the <= comparison. The result is user stuck forever in flush call. Convert to int to fix this. Further, get rid of ({}) to make code clearer. Signed-off-by: Michael S. Tsirkin --- drivers/vhost/vhost.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 38244f59cdd9..ade0568c07a4 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -97,22 +97,26 @@ void vhost_poll_stop(struct vhost_poll *poll) remove_wait_queue(poll->wqh, &poll->wait); } +static bool vhost_work_seq_done(struct vhost_dev *dev, struct vhost_work *work, + unsigned seq) +{ + int left; + spin_lock_irq(&dev->work_lock); + left = seq - work->done_seq; + spin_unlock_irq(&dev->work_lock); + return left <= 0; +} + static void vhost_work_flush(struct vhost_dev *dev, struct vhost_work *work) { unsigned seq; - int left; int flushing; spin_lock_irq(&dev->work_lock); seq = work->queue_seq; work->flushing++; spin_unlock_irq(&dev->work_lock); - wait_event(work->done, ({ - spin_lock_irq(&dev->work_lock); - left = seq - work->done_seq <= 0; - spin_unlock_irq(&dev->work_lock); - left; - })); + wait_event(work->done, vhost_work_seq_done(dev, work, seq)); spin_lock_irq(&dev->work_lock); flushing = --work->flushing; spin_unlock_irq(&dev->work_lock); -- cgit v1.2.1 From daef1f35ea1e2cca125eecd5f078f40b55eb9105 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 10 Jan 2011 16:35:44 +0800 Subject: ACPI: Check the returned value of set_cpus_allowed_ptr before T-state operation Now before it executes the T-state operation on one CPU, it will try to migrate to the target CPU. Especially this is required on the system that uses the MSR_IA32_THERMAL_CONTROL register to switch T-state. But unfortunately it doesn't check whether the migration is successful or not. In such case we will get/set the incorrect T-state on the offline CPU as it fails in the migration to the offline CPU. Signed-off-by: Zhao Yakui Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index ff3632717c51..ffc859c61393 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -876,7 +876,11 @@ static int acpi_processor_get_throttling(struct acpi_processor *pr) */ cpumask_copy(saved_mask, ¤t->cpus_allowed); /* FIXME: use work_on_cpu() */ - set_cpus_allowed_ptr(current, cpumask_of(pr->id)); + if (set_cpus_allowed_ptr(current, cpumask_of(pr->id))) { + /* Can't migrate to the target pr->id CPU. Exit */ + free_cpumask_var(saved_mask); + return -ENODEV; + } ret = pr->throttling.acpi_processor_get_throttling(pr); /* restore the previous state */ set_cpus_allowed_ptr(current, saved_mask); @@ -1051,6 +1055,14 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, return -ENOMEM; } + if (cpu_is_offline(pr->id)) { + /* + * the cpu pointed by pr->id is offline. Unnecessary to change + * the throttling state any more. + */ + return -ENODEV; + } + cpumask_copy(saved_mask, ¤t->cpus_allowed); t_state.target_state = state; p_throttling = &(pr->throttling); @@ -1074,7 +1086,11 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, */ if (p_throttling->shared_type == DOMAIN_COORD_TYPE_SW_ANY) { /* FIXME: use work_on_cpu() */ - set_cpus_allowed_ptr(current, cpumask_of(pr->id)); + if (set_cpus_allowed_ptr(current, cpumask_of(pr->id))) { + /* Can't migrate to the pr->id CPU. Exit */ + ret = -ENODEV; + goto exit; + } ret = p_throttling->acpi_processor_set_throttling(pr, t_state.target_state, force); } else { @@ -1106,7 +1122,8 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, } t_state.cpu = i; /* FIXME: use work_on_cpu() */ - set_cpus_allowed_ptr(current, cpumask_of(i)); + if (set_cpus_allowed_ptr(current, cpumask_of(i))) + continue; ret = match_pr->throttling. acpi_processor_set_throttling( match_pr, t_state.target_state, force); @@ -1126,6 +1143,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, /* restore the previous state */ /* FIXME: use work_on_cpu() */ set_cpus_allowed_ptr(current, saved_mask); +exit: free_cpumask_var(online_throttling_cpus); free_cpumask_var(saved_mask); return ret; -- cgit v1.2.1 From 5a344a505093dd65f82f338ffdb7208321b3630e Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 10 Jan 2011 16:35:45 +0800 Subject: ACPI: Reevaluate whether the T-state is supported or not after cpu is online/offline After one CPU is offlined, it is unnecessary to switch T-state for it. So it will be better that the throttling is disabled after the cpu is offline. At the same time after one cpu is online, we should check whether the T-state is supported and then set the corresponding T-state flag. Signed-off-by: Zhao Yakui Signed-off-by: Len Brown --- drivers/acpi/processor_driver.c | 5 ++++ drivers/acpi/processor_throttling.c | 52 +++++++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 85e48047d7b0..c8a0ca2af839 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -478,8 +478,13 @@ static int acpi_cpu_soft_notify(struct notifier_block *nfb, if (action == CPU_ONLINE && pr) { acpi_processor_ppc_has_changed(pr, 0); acpi_processor_cst_has_changed(pr); + acpi_processor_reevaluate_tstate(pr, action); acpi_processor_tstate_has_changed(pr); } + if (action == CPU_DEAD && pr) { + /* invalidate the flag.throttling after one CPU is offline */ + acpi_processor_reevaluate_tstate(pr, action); + } return NOTIFY_OK; } diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index ffc859c61393..4305d560b065 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -369,6 +369,58 @@ int acpi_processor_tstate_has_changed(struct acpi_processor *pr) return acpi_processor_set_throttling(pr, target_state, false); } +/* + * This function is used to reevaluate whether the T-state is valid + * after one CPU is onlined/offlined. + * It is noted that it won't reevaluate the following properties for + * the T-state. + * 1. Control method. + * 2. the number of supported T-state + * 3. TSD domain + */ +void acpi_processor_reevaluate_tstate(struct acpi_processor *pr, + unsigned long action) +{ + int result = 0; + + if (action == CPU_DEAD) { + /* When one CPU is offline, the T-state throttling + * will be invalidated. + */ + pr->flags.throttling = 0; + return; + } + /* the following is to recheck whether the T-state is valid for + * the online CPU + */ + if (!pr->throttling.state_count) { + /* If the number of T-state is invalid, it is + * invalidated. + */ + pr->flags.throttling = 0; + return; + } + pr->flags.throttling = 1; + + /* Disable throttling (if enabled). We'll let subsequent + * policy (e.g.thermal) decide to lower performance if it + * so chooses, but for now we'll crank up the speed. + */ + + result = acpi_processor_get_throttling(pr); + if (result) + goto end; + + if (pr->throttling.state) { + result = acpi_processor_set_throttling(pr, 0, false); + if (result) + goto end; + } + +end: + if (result) + pr->flags.throttling = 0; +} /* * _PTC - Processor Throttling Control (and status) register location */ -- cgit v1.2.1 From 6cae913d6c06557fee81aa8a181eafcc9a76516a Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 4 Jan 2011 13:16:37 +0530 Subject: ath9k_hw: Fix chip test USB devices do not require the chip test routine. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index fde978665e07..4a44f711045e 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -436,9 +436,10 @@ static int ath9k_hw_init_macaddr(struct ath_hw *ah) static int ath9k_hw_post_init(struct ath_hw *ah) { + struct ath_common *common = ath9k_hw_common(ah); int ecode; - if (!AR_SREV_9271(ah)) { + if (common->bus_ops->ath_bus_type != ATH_USB) { if (!ath9k_hw_chip_test(ah)) return -ENODEV; } -- cgit v1.2.1 From 07422063d43612762d53fac8b6df213c96f4b1f6 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 4 Jan 2011 13:16:54 +0530 Subject: ath9k_hw: Fix calibration for AR9287 devices AR9287 based devices have issues with ADC gain calibration which would cause uplink throughput drops in HT40 mode. Remove ADC gain from the supported calibration algorithms. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_calib.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c index 01880aa13e36..ea2e7d714bda 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c @@ -954,6 +954,9 @@ static void ar9002_hw_init_cal_settings(struct ath_hw *ah) &adc_dc_cal_multi_sample; } ah->supp_cals = ADC_GAIN_CAL | ADC_DC_CAL | IQ_MISMATCH_CAL; + + if (AR_SREV_9287(ah)) + ah->supp_cals &= ~ADC_GAIN_CAL; } } -- cgit v1.2.1 From 69bdacc8fbac32e4dc804ab13cafe3c1bbdcba9d Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 4 Jan 2011 13:17:05 +0530 Subject: ath9k_hw: Fix thermal issue with UB94 Hardcode the output voltage of x-PA bias LDO to the lowest value for UB94. The card doesn't get too hot now. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/eeprom_def.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c index 088f141f2006..749a93608664 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_def.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c @@ -226,6 +226,10 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah) eep->baseEepHeader.pwdclkind == 0) ah->need_an_top2_fixup = 1; + if ((common->bus_ops->ath_bus_type == ATH_USB) && + (AR_SREV_9280(ah))) + eep->modalHeader[0].xpaBiasLvl = 0; + return 0; } -- cgit v1.2.1 From 6d50192c17d4481c0e34c1ed2ae24fd7bc16e121 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 4 Jan 2011 13:43:39 +0530 Subject: ath9k_hw: Fix RX handling for USB devices Commit "ath9k_hw: Abort rx if hw is not coming out of full sleep in reset" uncondionally added aborting RX DMA in a HW reset, though it is a bit unclear as to why this is needed. Anyway, RX DMA is handled in the target for USB devices, and this would interfere with normal operations (scanning etc.), so fix this. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 4a44f711045e..1afb8bb85756 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1214,7 +1214,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, ah->txchainmask = common->tx_chainmask; ah->rxchainmask = common->rx_chainmask; - if (!ah->chip_fullsleep) { + if ((common->bus_ops->ath_bus_type != ATH_USB) && !ah->chip_fullsleep) { ath9k_hw_abortpcurecv(ah); if (!ath9k_hw_stopdmarecv(ah)) { ath_dbg(common, ATH_DBG_XMIT, -- cgit v1.2.1 From 55de80d64545e5c4cca7f574fdf04b1f02a5f8fd Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 5 Jan 2011 01:06:21 +0530 Subject: ath9k_htc: Really fix packet injection The chainmask value along with other configuration has to be set on the target for packet injection. Fix this and also move the monitor interface addition before the channel set segment to ensure that the opmode is updated properly. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc.h | 1 + drivers/net/wireless/ath/ath9k/htc_drv_main.c | 37 +++++++++++++++++++-------- 2 files changed, 27 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h index a099b3e87ed3..1ce506f23110 100644 --- a/drivers/net/wireless/ath/ath9k/htc.h +++ b/drivers/net/wireless/ath/ath9k/htc.h @@ -433,6 +433,7 @@ void ath9k_htc_txep(void *priv, struct sk_buff *skb, enum htc_endpoint_id ep_id, void ath9k_htc_beaconep(void *drv_priv, struct sk_buff *skb, enum htc_endpoint_id ep_id, bool txok); +int ath9k_htc_update_cap_target(struct ath9k_htc_priv *priv); void ath9k_htc_station_work(struct work_struct *work); void ath9k_htc_aggr_work(struct work_struct *work); void ath9k_ani_work(struct work_struct *work);; diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index 845b4c938d16..f4d576bc3ccd 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -301,6 +301,16 @@ static int ath9k_htc_add_monitor_interface(struct ath9k_htc_priv *priv) priv->nstations++; + /* + * Set chainmask etc. on the target. + */ + ret = ath9k_htc_update_cap_target(priv); + if (ret) + ath_dbg(common, ATH_DBG_CONFIG, + "Failed to update capability in target\n"); + + priv->ah->is_monitoring = true; + return 0; err_vif: @@ -328,6 +338,7 @@ static int ath9k_htc_remove_monitor_interface(struct ath9k_htc_priv *priv) } priv->nstations--; + priv->ah->is_monitoring = false; return 0; } @@ -419,7 +430,7 @@ static int ath9k_htc_remove_station(struct ath9k_htc_priv *priv, return 0; } -static int ath9k_htc_update_cap_target(struct ath9k_htc_priv *priv) +int ath9k_htc_update_cap_target(struct ath9k_htc_priv *priv) { struct ath9k_htc_cap_target tcap; int ret; @@ -1186,6 +1197,20 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed) } } + /* + * Monitor interface should be added before + * IEEE80211_CONF_CHANGE_CHANNEL is handled. + */ + if (changed & IEEE80211_CONF_CHANGE_MONITOR) { + if (conf->flags & IEEE80211_CONF_MONITOR) { + if (ath9k_htc_add_monitor_interface(priv)) + ath_err(common, "Failed to set monitor mode\n"); + else + ath_dbg(common, ATH_DBG_CONFIG, + "HW opmode set to Monitor mode\n"); + } + } + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { struct ieee80211_channel *curchan = hw->conf.channel; int pos = curchan->hw_value; @@ -1221,16 +1246,6 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed) ath_update_txpow(priv); } - if (changed & IEEE80211_CONF_CHANGE_MONITOR) { - if (conf->flags & IEEE80211_CONF_MONITOR) { - if (ath9k_htc_add_monitor_interface(priv)) - ath_err(common, "Failed to set monitor mode\n"); - else - ath_dbg(common, ATH_DBG_CONFIG, - "HW opmode set to Monitor mode\n"); - } - } - if (changed & IEEE80211_CONF_CHANGE_IDLE) { mutex_lock(&priv->htc_pm_lock); if (!priv->ps_idle) { -- cgit v1.2.1 From 3b5c5827d1f80ad8ae844a8b1183f59ddb90fe25 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Thu, 6 Jan 2011 23:47:52 +0100 Subject: p54: fix sequence no. accounting off-by-one error P54_HDR_FLAG_DATA_OUT_SEQNR is meant to tell the firmware that "the frame's sequence number has already been set by the application." Whereas IEEE80211_TX_CTL_ASSIGN_SEQ is set for frames which lack a valid sequence number and either the driver or firmware has to assign one. Yup, it's the exact opposite! Cc: Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/txrx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c index 76b2318a7dc7..f618b9623e5a 100644 --- a/drivers/net/wireless/p54/txrx.c +++ b/drivers/net/wireless/p54/txrx.c @@ -618,7 +618,7 @@ static void p54_tx_80211_header(struct p54_common *priv, struct sk_buff *skb, else *burst_possible = false; - if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) + if (!(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)) *flags |= P54_HDR_FLAG_DATA_OUT_SEQNR; if (info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE) -- cgit v1.2.1 From ed70c6e60ee51b0fb46752ab4fd372a071da59d8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michael=20B=C3=BCsch?= Date: Fri, 7 Jan 2011 19:48:05 +0100 Subject: ssb: Ignore dangling ethernet cores on wireless devices Some Broadcom based wireless devices contain dangling ethernet cores. This triggers the ssb probing mechanism and tries to load the b44 driver on this core. Ignore the dangling core in the ssb core scanning code to avoid access to the core and failure of b44 probing. Signed-off-by: Michael Buesch Tested-by: Larry Finger Signed-off-by: John W. Linville --- drivers/ssb/scan.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c index 5a0985d4ce15..29884c00c4d5 100644 --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c @@ -420,6 +420,16 @@ int ssb_bus_scan(struct ssb_bus *bus, bus->pcicore.dev = dev; #endif /* CONFIG_SSB_DRIVER_PCICORE */ break; + case SSB_DEV_ETHERNET: + if (bus->bustype == SSB_BUSTYPE_PCI) { + if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM && + (bus->host_pci->device & 0xFF00) == 0x4300) { + /* This is a dangling ethernet core on a + * wireless device. Ignore it. */ + continue; + } + } + break; default: break; } -- cgit v1.2.1 From 3c4a8cc46e8cc17910020964689f3faf6bffb8ad Mon Sep 17 00:00:00 2001 From: Indan Zupancic Date: Sat, 8 Jan 2011 12:17:27 +0100 Subject: ipw2200: Check for -1 INTA in tasklet too. This is an attempt to fix a long standing open bug: http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=1334 The interrupt handler checks for INTA being -1, apparently that means that the hardware is gone. But the interrupt handler defers actual interrupt processing to a tasklet. By the time the tasklet is run and checks INTA again, the hardware might be gone and INTA be -1, which confuses the driver because all event bits are set. The patch applies to 2.6.37. Signed-off-by: Indan Zupancic Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2x00/ipw2200.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 8d6ed5f6f46f..ae438ed80c2f 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -1973,6 +1973,13 @@ static void ipw_irq_tasklet(struct ipw_priv *priv) inta = ipw_read32(priv, IPW_INTA_RW); inta_mask = ipw_read32(priv, IPW_INTA_MASK_R); + + if (inta == 0xFFFFFFFF) { + /* Hardware disappeared */ + IPW_WARNING("TASKLET INTA == 0xFFFFFFFF\n"); + /* Only handle the cached INTA values */ + inta = 0; + } inta &= (IPW_INTA_MASK_ALL & inta_mask); /* Add any cached INTA values that need to be handled */ -- cgit v1.2.1 From 4e5518ca53be29c1ec3c00089c97bef36bfed515 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 10 Jan 2011 12:56:05 +0100 Subject: hostap_cs: fix sleeping function called from invalid context pcmcia_request_irq() and pcmcia_enable_device() are intended to be called from process context (first function allocate memory with GFP_KERNEL, second take a mutex). We can not take spin lock and call them. It's safe to move spin lock after pcmcia_enable_device() as we still hold off IRQ until dev->base_addr is 0 and driver will not proceed with interrupts when is not ready. Patch resolves: https://bugzilla.redhat.com/show_bug.cgi?id=643758 Reported-and-tested-by: rbugz@biobind.com Cc: stable@kernel.org # 2.6.34+ Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/hostap_cs.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index bd8a4134edeb..2176edede39b 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -518,22 +518,21 @@ static int prism2_config(struct pcmcia_device *link) hw_priv->link = link; /* - * Make sure the IRQ handler cannot proceed until at least - * dev->base_addr is initialized. + * We enable IRQ here, but IRQ handler will not proceed + * until dev->base_addr is set below. This protect us from + * receive interrupts when driver is not initialized. */ - spin_lock_irqsave(&local->irq_init_lock, flags); - ret = pcmcia_request_irq(link, prism2_interrupt); if (ret) - goto failed_unlock; + goto failed; ret = pcmcia_enable_device(link); if (ret) - goto failed_unlock; + goto failed; + spin_lock_irqsave(&local->irq_init_lock, flags); dev->irq = link->irq; dev->base_addr = link->resource[0]->start; - spin_unlock_irqrestore(&local->irq_init_lock, flags); local->shutdown = 0; @@ -546,8 +545,6 @@ static int prism2_config(struct pcmcia_device *link) return ret; - failed_unlock: - spin_unlock_irqrestore(&local->irq_init_lock, flags); failed: kfree(hw_priv); prism2_release((u_long)link); -- cgit v1.2.1 From 76d9cc454a8d0bb7484616a4b8136280068c8a8b Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 10 Jan 2011 11:05:06 +0000 Subject: spi: tegra: don't treat NULL clk as an error Some platforms have been known to return NULL from clk_get() if they support only a single struct clk. Whilst tegra doesn't do this, make the drivers consistent with others. Signed-off-by: Jamie Iles Acked-by: Russell King Signed-off-by: Grant Likely --- drivers/spi/spi_tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi_tegra.c b/drivers/spi/spi_tegra.c index bb7df02a5472..891e5909038c 100644 --- a/drivers/spi/spi_tegra.c +++ b/drivers/spi/spi_tegra.c @@ -513,7 +513,7 @@ static int __init spi_tegra_probe(struct platform_device *pdev) } tspi->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR_OR_NULL(tspi->clk)) { + if (IS_ERR(tspi->clk)) { dev_err(&pdev->dev, "can not get clock\n"); ret = PTR_ERR(tspi->clk); goto err2; -- cgit v1.2.1 From c0fdcfa8e9a994176ff1070dced50eeff5f6f851 Mon Sep 17 00:00:00 2001 From: Ryan Mallon Date: Mon, 10 Jan 2011 20:49:27 +0100 Subject: ARM: 6616/1: Fix ep93xx-fb init/exit annotations Fix section mismatch errors in the ep93xx-fb driver resulting from incorrect init/exit annotations. Reported-by: H Hartley Sweeten Signed-off-by: Ryan Mallon Tested-by: H Hartley Sweeten Signed-off-by: Russell King --- drivers/video/ep93xx-fb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/video/ep93xx-fb.c b/drivers/video/ep93xx-fb.c index 0c99de0562ca..b358d045f130 100644 --- a/drivers/video/ep93xx-fb.c +++ b/drivers/video/ep93xx-fb.c @@ -483,7 +483,7 @@ static void ep93xxfb_dealloc_videomem(struct fb_info *info) info->screen_base, info->fix.smem_start); } -static int __init ep93xxfb_probe(struct platform_device *pdev) +static int __devinit ep93xxfb_probe(struct platform_device *pdev) { struct ep93xxfb_mach_info *mach_info = pdev->dev.platform_data; struct fb_info *info; @@ -598,7 +598,7 @@ failed: return err; } -static int ep93xxfb_remove(struct platform_device *pdev) +static int __devexit ep93xxfb_remove(struct platform_device *pdev) { struct fb_info *info = platform_get_drvdata(pdev); struct ep93xx_fbi *fbi = info->par; @@ -622,7 +622,7 @@ static int ep93xxfb_remove(struct platform_device *pdev) static struct platform_driver ep93xxfb_driver = { .probe = ep93xxfb_probe, - .remove = ep93xxfb_remove, + .remove = __devexit_p(ep93xxfb_remove), .driver = { .name = "ep93xx-fb", .owner = THIS_MODULE, -- cgit v1.2.1 From 50c01fc355c6a97c511d58411f9bc0e4b8fc4659 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Tue, 11 Jan 2011 12:43:52 +0000 Subject: spi/dw_spi: don't treat NULL clk as an error clk_get() returns a struct clk cookie to the driver and some platforms may return NULL if they only support a single clock. clk_get() has only failed if it returns a ERR_PTR() encoded pointer. Signed-off-by: Jamie Iles Signed-off-by: Grant Likely --- drivers/spi/dw_spi_mmio.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/dw_spi_mmio.c b/drivers/spi/dw_spi_mmio.c index db35bd9c1b24..2fa012c109bc 100644 --- a/drivers/spi/dw_spi_mmio.c +++ b/drivers/spi/dw_spi_mmio.c @@ -9,6 +9,7 @@ */ #include +#include #include #include #include @@ -68,8 +69,8 @@ static int __devinit dw_spi_mmio_probe(struct platform_device *pdev) } dwsmmio->clk = clk_get(&pdev->dev, NULL); - if (!dwsmmio->clk) { - ret = -ENODEV; + if (IS_ERR(dwsmmio->clk)) { + ret = PTR_ERR(dwsmmio->clk); goto err_irq; } clk_enable(dwsmmio->clk); -- cgit v1.2.1 From ab31523c2fcac557226bac72cbdf5fafe01f9a26 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 14 Dec 2010 18:40:46 +0000 Subject: xen/gntdev: allow usermode to map granted pages The gntdev driver allows usermode to map granted pages from other domains. This is typically used to implement a Xen backend driver in user mode. Signed-off-by: Gerd Hoffmann Signed-off-by: Stefano Stabellini Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/Kconfig | 7 + drivers/xen/Makefile | 2 + drivers/xen/gntdev.c | 635 +++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 644 insertions(+) create mode 100644 drivers/xen/gntdev.c (limited to 'drivers') diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index 6e6180ccd726..bd3095f0dff2 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -62,6 +62,13 @@ config XEN_SYS_HYPERVISOR virtual environment, /sys/hypervisor will still be present, but will have no xen contents. +config XEN_GNTDEV + tristate "userspace grant access device driver" + depends on XEN + select MMU_NOTIFIER + help + Allows userspace processes to use grants. + config XEN_PLATFORM_PCI tristate "xen platform pci device driver" depends on XEN_PVHVM diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index 533a199e7a3f..674fdb5fee49 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o obj-$(CONFIG_XEN_XENCOMM) += xencomm.o obj-$(CONFIG_XEN_BALLOON) += balloon.o obj-$(CONFIG_XEN_DEV_EVTCHN) += xen-evtchn.o +obj-$(CONFIG_XEN_GNTDEV) += xen-gntdev.o obj-$(CONFIG_XENFS) += xenfs/ obj-$(CONFIG_XEN_SYS_HYPERVISOR) += sys-hypervisor.o obj-$(CONFIG_XEN_PLATFORM_PCI) += platform-pci.o @@ -16,4 +17,5 @@ obj-$(CONFIG_SWIOTLB_XEN) += swiotlb-xen.o obj-$(CONFIG_XEN_DOM0) += pci.o xen-evtchn-y := evtchn.o +xen-gntdev-y := gntdev.o diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c new file mode 100644 index 000000000000..cfe063372aa4 --- /dev/null +++ b/drivers/xen/gntdev.c @@ -0,0 +1,635 @@ +/****************************************************************************** + * gntdev.c + * + * Device for accessing (in user-space) pages that have been granted by other + * domains. + * + * Copyright (c) 2006-2007, D G Murray. + * (c) 2009 Gerd Hoffmann + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Derek G. Murray , " + "Gerd Hoffmann "); +MODULE_DESCRIPTION("User-space granted page access driver"); + +static int limit = 1024; +module_param(limit, int, 0644); +MODULE_PARM_DESC(limit, "Maximum number of grants that may be mapped at " + "once by a gntdev instance"); + +struct gntdev_priv { + struct list_head maps; + uint32_t used; + uint32_t limit; + /* lock protects maps from concurrent changes */ + spinlock_t lock; + struct mm_struct *mm; + struct mmu_notifier mn; +}; + +struct grant_map { + struct list_head next; + struct gntdev_priv *priv; + struct vm_area_struct *vma; + int index; + int count; + int flags; + int is_mapped; + struct ioctl_gntdev_grant_ref *grants; + struct gnttab_map_grant_ref *map_ops; + struct gnttab_unmap_grant_ref *unmap_ops; +}; + +/* ------------------------------------------------------------------ */ + +static void gntdev_print_maps(struct gntdev_priv *priv, + char *text, int text_index) +{ +#ifdef DEBUG + struct grant_map *map; + + pr_debug("maps list (priv %p, usage %d/%d)\n", + priv, priv->used, priv->limit); + + list_for_each_entry(map, &priv->maps, next) + pr_debug(" index %2d, count %2d %s\n", + map->index, map->count, + map->index == text_index && text ? text : ""); +#endif +} + +static struct grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count) +{ + struct grant_map *add; + + add = kzalloc(sizeof(struct grant_map), GFP_KERNEL); + if (NULL == add) + return NULL; + + add->grants = kzalloc(sizeof(add->grants[0]) * count, GFP_KERNEL); + add->map_ops = kzalloc(sizeof(add->map_ops[0]) * count, GFP_KERNEL); + add->unmap_ops = kzalloc(sizeof(add->unmap_ops[0]) * count, GFP_KERNEL); + if (NULL == add->grants || + NULL == add->map_ops || + NULL == add->unmap_ops) + goto err; + + add->index = 0; + add->count = count; + add->priv = priv; + + if (add->count + priv->used > priv->limit) + goto err; + + return add; + +err: + kfree(add->grants); + kfree(add->map_ops); + kfree(add->unmap_ops); + kfree(add); + return NULL; +} + +static void gntdev_add_map(struct gntdev_priv *priv, struct grant_map *add) +{ + struct grant_map *map; + + list_for_each_entry(map, &priv->maps, next) { + if (add->index + add->count < map->index) { + list_add_tail(&add->next, &map->next); + goto done; + } + add->index = map->index + map->count; + } + list_add_tail(&add->next, &priv->maps); + +done: + priv->used += add->count; + gntdev_print_maps(priv, "[new]", add->index); +} + +static struct grant_map *gntdev_find_map_index(struct gntdev_priv *priv, + int index, int count) +{ + struct grant_map *map; + + list_for_each_entry(map, &priv->maps, next) { + if (map->index != index) + continue; + if (map->count != count) + continue; + return map; + } + return NULL; +} + +static struct grant_map *gntdev_find_map_vaddr(struct gntdev_priv *priv, + unsigned long vaddr) +{ + struct grant_map *map; + + list_for_each_entry(map, &priv->maps, next) { + if (!map->vma) + continue; + if (vaddr < map->vma->vm_start) + continue; + if (vaddr >= map->vma->vm_end) + continue; + return map; + } + return NULL; +} + +static int gntdev_del_map(struct grant_map *map) +{ + int i; + + if (map->vma) + return -EBUSY; + for (i = 0; i < map->count; i++) + if (map->unmap_ops[i].handle) + return -EBUSY; + + map->priv->used -= map->count; + list_del(&map->next); + return 0; +} + +static void gntdev_free_map(struct grant_map *map) +{ + if (!map) + return; + kfree(map->grants); + kfree(map->map_ops); + kfree(map->unmap_ops); + kfree(map); +} + +/* ------------------------------------------------------------------ */ + +static int find_grant_ptes(pte_t *pte, pgtable_t token, + unsigned long addr, void *data) +{ + struct grant_map *map = data; + unsigned int pgnr = (addr - map->vma->vm_start) >> PAGE_SHIFT; + u64 pte_maddr; + + BUG_ON(pgnr >= map->count); + pte_maddr = (u64)pfn_to_mfn(page_to_pfn(token)) << PAGE_SHIFT; + pte_maddr += (unsigned long)pte & ~PAGE_MASK; + gnttab_set_map_op(&map->map_ops[pgnr], pte_maddr, map->flags, + map->grants[pgnr].ref, + map->grants[pgnr].domid); + gnttab_set_unmap_op(&map->unmap_ops[pgnr], pte_maddr, map->flags, + 0 /* handle */); + return 0; +} + +static int map_grant_pages(struct grant_map *map) +{ + int i, err = 0; + + pr_debug("map %d+%d\n", map->index, map->count); + err = HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, + map->map_ops, map->count); + if (err) + return err; + + for (i = 0; i < map->count; i++) { + if (map->map_ops[i].status) + err = -EINVAL; + map->unmap_ops[i].handle = map->map_ops[i].handle; + } + return err; +} + +static int unmap_grant_pages(struct grant_map *map, int offset, int pages) +{ + int i, err = 0; + + pr_debug("map %d+%d [%d+%d]\n", map->index, map->count, offset, pages); + err = HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, + map->unmap_ops + offset, pages); + if (err) + return err; + + for (i = 0; i < pages; i++) { + if (map->unmap_ops[offset+i].status) + err = -EINVAL; + map->unmap_ops[offset+i].handle = 0; + } + return err; +} + +/* ------------------------------------------------------------------ */ + +static void gntdev_vma_close(struct vm_area_struct *vma) +{ + struct grant_map *map = vma->vm_private_data; + + pr_debug("close %p\n", vma); + map->is_mapped = 0; + map->vma = NULL; + vma->vm_private_data = NULL; +} + +static int gntdev_vma_fault(struct vm_area_struct *vma, struct vm_fault *vmf) +{ + pr_debug("vaddr %p, pgoff %ld (shouldn't happen)\n", + vmf->virtual_address, vmf->pgoff); + vmf->flags = VM_FAULT_ERROR; + return 0; +} + +static struct vm_operations_struct gntdev_vmops = { + .close = gntdev_vma_close, + .fault = gntdev_vma_fault, +}; + +/* ------------------------------------------------------------------ */ + +static void mn_invl_range_start(struct mmu_notifier *mn, + struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + struct gntdev_priv *priv = container_of(mn, struct gntdev_priv, mn); + struct grant_map *map; + unsigned long mstart, mend; + int err; + + spin_lock(&priv->lock); + list_for_each_entry(map, &priv->maps, next) { + if (!map->vma) + continue; + if (!map->is_mapped) + continue; + if (map->vma->vm_start >= end) + continue; + if (map->vma->vm_end <= start) + continue; + mstart = max(start, map->vma->vm_start); + mend = min(end, map->vma->vm_end); + pr_debug("map %d+%d (%lx %lx), range %lx %lx, mrange %lx %lx\n", + map->index, map->count, + map->vma->vm_start, map->vma->vm_end, + start, end, mstart, mend); + err = unmap_grant_pages(map, + (mstart - map->vma->vm_start) >> PAGE_SHIFT, + (mend - mstart) >> PAGE_SHIFT); + WARN_ON(err); + } + spin_unlock(&priv->lock); +} + +static void mn_invl_page(struct mmu_notifier *mn, + struct mm_struct *mm, + unsigned long address) +{ + mn_invl_range_start(mn, mm, address, address + PAGE_SIZE); +} + +static void mn_release(struct mmu_notifier *mn, + struct mm_struct *mm) +{ + struct gntdev_priv *priv = container_of(mn, struct gntdev_priv, mn); + struct grant_map *map; + int err; + + spin_lock(&priv->lock); + list_for_each_entry(map, &priv->maps, next) { + if (!map->vma) + continue; + pr_debug("map %d+%d (%lx %lx)\n", + map->index, map->count, + map->vma->vm_start, map->vma->vm_end); + err = unmap_grant_pages(map, /* offset */ 0, map->count); + WARN_ON(err); + } + spin_unlock(&priv->lock); +} + +struct mmu_notifier_ops gntdev_mmu_ops = { + .release = mn_release, + .invalidate_page = mn_invl_page, + .invalidate_range_start = mn_invl_range_start, +}; + +/* ------------------------------------------------------------------ */ + +static int gntdev_open(struct inode *inode, struct file *flip) +{ + struct gntdev_priv *priv; + int ret = 0; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + INIT_LIST_HEAD(&priv->maps); + spin_lock_init(&priv->lock); + priv->limit = limit; + + priv->mm = get_task_mm(current); + if (!priv->mm) { + kfree(priv); + return -ENOMEM; + } + priv->mn.ops = &gntdev_mmu_ops; + ret = mmu_notifier_register(&priv->mn, priv->mm); + mmput(priv->mm); + + if (ret) { + kfree(priv); + return ret; + } + + flip->private_data = priv; + pr_debug("priv %p\n", priv); + + return 0; +} + +static int gntdev_release(struct inode *inode, struct file *flip) +{ + struct gntdev_priv *priv = flip->private_data; + struct grant_map *map; + int err; + + pr_debug("priv %p\n", priv); + + spin_lock(&priv->lock); + while (!list_empty(&priv->maps)) { + map = list_entry(priv->maps.next, struct grant_map, next); + err = gntdev_del_map(map); + if (WARN_ON(err)) + gntdev_free_map(map); + + } + spin_unlock(&priv->lock); + + mmu_notifier_unregister(&priv->mn, priv->mm); + kfree(priv); + return 0; +} + +static long gntdev_ioctl_map_grant_ref(struct gntdev_priv *priv, + struct ioctl_gntdev_map_grant_ref __user *u) +{ + struct ioctl_gntdev_map_grant_ref op; + struct grant_map *map; + int err; + + if (copy_from_user(&op, u, sizeof(op)) != 0) + return -EFAULT; + pr_debug("priv %p, add %d\n", priv, op.count); + if (unlikely(op.count <= 0)) + return -EINVAL; + if (unlikely(op.count > priv->limit)) + return -EINVAL; + + err = -ENOMEM; + map = gntdev_alloc_map(priv, op.count); + if (!map) + return err; + if (copy_from_user(map->grants, &u->refs, + sizeof(map->grants[0]) * op.count) != 0) { + gntdev_free_map(map); + return err; + } + + spin_lock(&priv->lock); + gntdev_add_map(priv, map); + op.index = map->index << PAGE_SHIFT; + spin_unlock(&priv->lock); + + if (copy_to_user(u, &op, sizeof(op)) != 0) { + spin_lock(&priv->lock); + gntdev_del_map(map); + spin_unlock(&priv->lock); + gntdev_free_map(map); + return err; + } + return 0; +} + +static long gntdev_ioctl_unmap_grant_ref(struct gntdev_priv *priv, + struct ioctl_gntdev_unmap_grant_ref __user *u) +{ + struct ioctl_gntdev_unmap_grant_ref op; + struct grant_map *map; + int err = -ENOENT; + + if (copy_from_user(&op, u, sizeof(op)) != 0) + return -EFAULT; + pr_debug("priv %p, del %d+%d\n", priv, (int)op.index, (int)op.count); + + spin_lock(&priv->lock); + map = gntdev_find_map_index(priv, op.index >> PAGE_SHIFT, op.count); + if (map) + err = gntdev_del_map(map); + spin_unlock(&priv->lock); + if (!err) + gntdev_free_map(map); + return err; +} + +static long gntdev_ioctl_get_offset_for_vaddr(struct gntdev_priv *priv, + struct ioctl_gntdev_get_offset_for_vaddr __user *u) +{ + struct ioctl_gntdev_get_offset_for_vaddr op; + struct grant_map *map; + + if (copy_from_user(&op, u, sizeof(op)) != 0) + return -EFAULT; + pr_debug("priv %p, offset for vaddr %lx\n", priv, (unsigned long)op.vaddr); + + spin_lock(&priv->lock); + map = gntdev_find_map_vaddr(priv, op.vaddr); + if (map == NULL || + map->vma->vm_start != op.vaddr) { + spin_unlock(&priv->lock); + return -EINVAL; + } + op.offset = map->index << PAGE_SHIFT; + op.count = map->count; + spin_unlock(&priv->lock); + + if (copy_to_user(u, &op, sizeof(op)) != 0) + return -EFAULT; + return 0; +} + +static long gntdev_ioctl_set_max_grants(struct gntdev_priv *priv, + struct ioctl_gntdev_set_max_grants __user *u) +{ + struct ioctl_gntdev_set_max_grants op; + + if (copy_from_user(&op, u, sizeof(op)) != 0) + return -EFAULT; + pr_debug("priv %p, limit %d\n", priv, op.count); + if (op.count > limit) + return -E2BIG; + + spin_lock(&priv->lock); + priv->limit = op.count; + spin_unlock(&priv->lock); + return 0; +} + +static long gntdev_ioctl(struct file *flip, + unsigned int cmd, unsigned long arg) +{ + struct gntdev_priv *priv = flip->private_data; + void __user *ptr = (void __user *)arg; + + switch (cmd) { + case IOCTL_GNTDEV_MAP_GRANT_REF: + return gntdev_ioctl_map_grant_ref(priv, ptr); + + case IOCTL_GNTDEV_UNMAP_GRANT_REF: + return gntdev_ioctl_unmap_grant_ref(priv, ptr); + + case IOCTL_GNTDEV_GET_OFFSET_FOR_VADDR: + return gntdev_ioctl_get_offset_for_vaddr(priv, ptr); + + case IOCTL_GNTDEV_SET_MAX_GRANTS: + return gntdev_ioctl_set_max_grants(priv, ptr); + + default: + pr_debug("priv %p, unknown cmd %x\n", priv, cmd); + return -ENOIOCTLCMD; + } + + return 0; +} + +static int gntdev_mmap(struct file *flip, struct vm_area_struct *vma) +{ + struct gntdev_priv *priv = flip->private_data; + int index = vma->vm_pgoff; + int count = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; + struct grant_map *map; + int err = -EINVAL; + + if ((vma->vm_flags & VM_WRITE) && !(vma->vm_flags & VM_SHARED)) + return -EINVAL; + + pr_debug("map %d+%d at %lx (pgoff %lx)\n", + index, count, vma->vm_start, vma->vm_pgoff); + + spin_lock(&priv->lock); + map = gntdev_find_map_index(priv, index, count); + if (!map) + goto unlock_out; + if (map->vma) + goto unlock_out; + if (priv->mm != vma->vm_mm) { + printk(KERN_WARNING "Huh? Other mm?\n"); + goto unlock_out; + } + + vma->vm_ops = &gntdev_vmops; + + vma->vm_flags |= VM_RESERVED|VM_DONTCOPY|VM_DONTEXPAND; + + vma->vm_private_data = map; + map->vma = vma; + + map->flags = GNTMAP_host_map | GNTMAP_application_map | GNTMAP_contains_pte; + if (!(vma->vm_flags & VM_WRITE)) + map->flags |= GNTMAP_readonly; + + err = apply_to_page_range(vma->vm_mm, vma->vm_start, + vma->vm_end - vma->vm_start, + find_grant_ptes, map); + if (err) { + printk(KERN_WARNING "find_grant_ptes() failure.\n"); + goto unlock_out; + } + + err = map_grant_pages(map); + if (err) { + printk(KERN_WARNING "map_grant_pages() failure.\n"); + goto unlock_out; + } + map->is_mapped = 1; + +unlock_out: + spin_unlock(&priv->lock); + return err; +} + +static const struct file_operations gntdev_fops = { + .owner = THIS_MODULE, + .open = gntdev_open, + .release = gntdev_release, + .mmap = gntdev_mmap, + .unlocked_ioctl = gntdev_ioctl +}; + +static struct miscdevice gntdev_miscdev = { + .minor = MISC_DYNAMIC_MINOR, + .name = "xen/gntdev", + .fops = &gntdev_fops, +}; + +/* ------------------------------------------------------------------ */ + +static int __init gntdev_init(void) +{ + int err; + + if (!xen_domain()) + return -ENODEV; + + err = misc_register(&gntdev_miscdev); + if (err != 0) { + printk(KERN_ERR "Could not register gntdev device\n"); + return err; + } + return 0; +} + +static void __exit gntdev_exit(void) +{ + misc_deregister(&gntdev_miscdev); +} + +module_init(gntdev_init); +module_exit(gntdev_exit); + +/* ------------------------------------------------------------------ */ -- cgit v1.2.1 From 8d3eaea24609c7cd6fb0e6471f46a52f9e5d0202 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 11 Nov 2010 14:39:12 -0800 Subject: xen/gntdev: add VM_PFNMAP to vma These pages are from other domains, so don't have any local PFN. VM_PFNMAP is the closest concept Linux has to this. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index cfe063372aa4..fa6355a97081 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -564,7 +564,7 @@ static int gntdev_mmap(struct file *flip, struct vm_area_struct *vma) vma->vm_ops = &gntdev_vmops; - vma->vm_flags |= VM_RESERVED|VM_DONTCOPY|VM_DONTEXPAND; + vma->vm_flags |= VM_RESERVED|VM_DONTCOPY|VM_DONTEXPAND|VM_PFNMAP; vma->vm_private_data = map; map->vma = vma; -- cgit v1.2.1 From 9329e7604fe915fd0201633d3c38adae307d56a5 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 8 Dec 2010 11:57:40 +0000 Subject: xen: gntdev: move use of GNTMAP_contains_pte next to the map_op This flag controls the meaning of gnttab_map_grant_ref.host_addr and specifies that the field contains a reference to the pte entry to be used to perform the mapping. Therefore move the use of this flag to the point at which we actually use a reference to the pte instead of something else, splitting up the usage of the flag in this way is confusing and potentially error prone. The other flags are all properties of the mapping itself as opposed to properties of the hypercall arguments and therefore it make sense to continue to pass them round in map->flags. Signed-off-by: Ian Campbell Cc: Stefano Stabellini Cc: Derek G. Murray Cc: Gerd Hoffmann Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntdev.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index fa6355a97081..888d76307d59 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -211,10 +211,12 @@ static int find_grant_ptes(pte_t *pte, pgtable_t token, BUG_ON(pgnr >= map->count); pte_maddr = (u64)pfn_to_mfn(page_to_pfn(token)) << PAGE_SHIFT; pte_maddr += (unsigned long)pte & ~PAGE_MASK; - gnttab_set_map_op(&map->map_ops[pgnr], pte_maddr, map->flags, + gnttab_set_map_op(&map->map_ops[pgnr], pte_maddr, + GNTMAP_contains_pte | map->flags, map->grants[pgnr].ref, map->grants[pgnr].domid); - gnttab_set_unmap_op(&map->unmap_ops[pgnr], pte_maddr, map->flags, + gnttab_set_unmap_op(&map->unmap_ops[pgnr], pte_maddr, + GNTMAP_contains_pte | map->flags, 0 /* handle */); return 0; } @@ -569,7 +571,7 @@ static int gntdev_mmap(struct file *flip, struct vm_area_struct *vma) vma->vm_private_data = map; map->vma = vma; - map->flags = GNTMAP_host_map | GNTMAP_application_map | GNTMAP_contains_pte; + map->flags = GNTMAP_host_map | GNTMAP_application_map; if (!(vma->vm_flags & VM_WRITE)) map->flags |= GNTMAP_readonly; -- cgit v1.2.1 From ba5d1012292403c8037adf4a54c4ec50dfe846c4 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 8 Dec 2010 10:54:32 -0800 Subject: xen/gntdev: stop using "token" argument It's the struct page of the L1 pte page. But we can get its mfn by simply doing an arbitrary_virt_to_machine() on it anyway (which is the safe conservative choice; since we no longer allow HIGHPTE pages, we would never expect to be operating on a mapped pte page). Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 888d76307d59..a2ea5335e152 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -209,8 +209,8 @@ static int find_grant_ptes(pte_t *pte, pgtable_t token, u64 pte_maddr; BUG_ON(pgnr >= map->count); - pte_maddr = (u64)pfn_to_mfn(page_to_pfn(token)) << PAGE_SHIFT; - pte_maddr += (unsigned long)pte & ~PAGE_MASK; + pte_maddr = arbitrary_virt_to_machine(pte).maddr; + gnttab_set_map_op(&map->map_ops[pgnr], pte_maddr, GNTMAP_contains_pte | map->flags, map->grants[pgnr].ref, -- cgit v1.2.1 From f0a70c882ea546bbd802643990ceded32c39facc Mon Sep 17 00:00:00 2001 From: Daniel De Graaf Date: Fri, 7 Jan 2011 11:51:47 +0000 Subject: xen/gntdev: Fix circular locking dependency apply_to_page_range will acquire PTE lock while priv->lock is held, and mn_invl_range_start tries to acquire priv->lock with PTE already held. Fix by not holding priv->lock during the entire map operation. This is safe because map->vma is set nonzero while the lock is held, which will cause subsequent maps to fail and will cause the unmap ioctl (and other users of gntdev_del_map) to return -EBUSY until the area is unmapped. It is similarly impossible for gntdev_vma_close to be called while the vma is still being created. Signed-off-by: Daniel De Graaf Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntdev.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index a2ea5335e152..aba76d437ea8 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -575,21 +575,26 @@ static int gntdev_mmap(struct file *flip, struct vm_area_struct *vma) if (!(vma->vm_flags & VM_WRITE)) map->flags |= GNTMAP_readonly; + spin_unlock(&priv->lock); + err = apply_to_page_range(vma->vm_mm, vma->vm_start, vma->vm_end - vma->vm_start, find_grant_ptes, map); if (err) { printk(KERN_WARNING "find_grant_ptes() failure.\n"); - goto unlock_out; + return err; } err = map_grant_pages(map); if (err) { printk(KERN_WARNING "map_grant_pages() failure.\n"); - goto unlock_out; + return err; } + map->is_mapped = 1; + return 0; + unlock_out: spin_unlock(&priv->lock); return err; -- cgit v1.2.1 From 289b777eac19c811b474593b4d2fd14e46340c23 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Fri, 10 Dec 2010 14:54:44 +0000 Subject: xen: introduce gnttab_map_refs and gnttab_unmap_refs gnttab_map_refs maps some grant refs and uses the new m2p override to set a proper m2p mapping for the granted pages. gnttab_unmap_refs unmaps the granted refs and removes th mappings from the m2p override. Signed-off-by: Stefano Stabellini Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/grant-table.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'drivers') diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 6c4531816496..1afd5690858c 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -447,6 +447,42 @@ unsigned int gnttab_max_grant_frames(void) } EXPORT_SYMBOL_GPL(gnttab_max_grant_frames); +int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops, + struct page **pages, unsigned int count) +{ + int i, ret; + pte_t *pte; + unsigned long mfn; + + ret = HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, map_ops, count); + + for (i = 0; i < count; i++) { + /* m2p override only supported for GNTMAP_contains_pte mappings */ + if (!(map_ops[i].flags & GNTMAP_contains_pte)) + continue; + pte = (pte_t *) (mfn_to_virt(PFN_DOWN(map_ops[i].host_addr)) + + (map_ops[i].host_addr & ~PAGE_MASK)); + mfn = pte_mfn(*pte); + m2p_add_override(mfn, pages[i]); + } + + return ret; +} +EXPORT_SYMBOL_GPL(gnttab_map_refs); + +int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops, + struct page **pages, unsigned int count) +{ + int i, ret; + + ret = HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, unmap_ops, count); + for (i = 0; i < count; i++) + m2p_remove_override(pages[i]); + + return ret; +} +EXPORT_SYMBOL_GPL(gnttab_unmap_refs); + static int gnttab_map(unsigned int start_idx, unsigned int end_idx) { struct gnttab_setup_table setup; -- cgit v1.2.1 From a12b4eb34bb1ea16046c5b61e7a887e252cc1cce Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Fri, 10 Dec 2010 14:56:42 +0000 Subject: xen gntdev: use gnttab_map_refs and gnttab_unmap_refs Use gnttab_map_refs and gnttab_unmap_refs to map and unmap the grant ref, so that we can have a corresponding struct page. Signed-off-by: Stefano Stabellini Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/gntdev.c | 37 ++++++++++++++++++++++++++++++------- 1 file changed, 30 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index aba76d437ea8..1e31cdcdae1e 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -71,6 +71,7 @@ struct grant_map { struct ioctl_gntdev_grant_ref *grants; struct gnttab_map_grant_ref *map_ops; struct gnttab_unmap_grant_ref *unmap_ops; + struct page **pages; }; /* ------------------------------------------------------------------ */ @@ -94,6 +95,7 @@ static void gntdev_print_maps(struct gntdev_priv *priv, static struct grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count) { struct grant_map *add; + int i; add = kzalloc(sizeof(struct grant_map), GFP_KERNEL); if (NULL == add) @@ -102,11 +104,19 @@ static struct grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count) add->grants = kzalloc(sizeof(add->grants[0]) * count, GFP_KERNEL); add->map_ops = kzalloc(sizeof(add->map_ops[0]) * count, GFP_KERNEL); add->unmap_ops = kzalloc(sizeof(add->unmap_ops[0]) * count, GFP_KERNEL); - if (NULL == add->grants || - NULL == add->map_ops || - NULL == add->unmap_ops) + add->pages = kzalloc(sizeof(add->pages[0]) * count, GFP_KERNEL); + if (NULL == add->grants || + NULL == add->map_ops || + NULL == add->unmap_ops || + NULL == add->pages) goto err; + for (i = 0; i < count; i++) { + add->pages[i] = alloc_page(GFP_KERNEL | __GFP_HIGHMEM); + if (add->pages[i] == NULL) + goto err; + } + add->index = 0; add->count = count; add->priv = priv; @@ -117,6 +127,12 @@ static struct grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count) return add; err: + if (add->pages) + for (i = 0; i < count; i++) { + if (add->pages[i]) + __free_page(add->pages[i]); + } + kfree(add->pages); kfree(add->grants); kfree(add->map_ops); kfree(add->unmap_ops); @@ -191,8 +207,17 @@ static int gntdev_del_map(struct grant_map *map) static void gntdev_free_map(struct grant_map *map) { + int i; + if (!map) return; + + if (map->pages) + for (i = 0; i < map->count; i++) { + if (map->pages[i]) + __free_page(map->pages[i]); + } + kfree(map->pages); kfree(map->grants); kfree(map->map_ops); kfree(map->unmap_ops); @@ -226,8 +251,7 @@ static int map_grant_pages(struct grant_map *map) int i, err = 0; pr_debug("map %d+%d\n", map->index, map->count); - err = HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, - map->map_ops, map->count); + err = gnttab_map_refs(map->map_ops, map->pages, map->count); if (err) return err; @@ -244,8 +268,7 @@ static int unmap_grant_pages(struct grant_map *map, int offset, int pages) int i, err = 0; pr_debug("map %d+%d [%d+%d]\n", map->index, map->count, offset, pages); - err = HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, - map->unmap_ops + offset, pages); + err = gnttab_unmap_refs(map->unmap_ops + offset, map->pages, pages); if (err) return err; -- cgit v1.2.1 From 87f1d40a706bdebdc8f959b9ac291d0d8fdfcc7e Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 13 Dec 2010 14:42:30 +0000 Subject: xen p2m: clear the old pte when adding a page to m2p_override When adding a page to m2p_override we change the p2m of the page so we need to also clear the old pte of the kernel linear mapping because it doesn't correspond anymore. When we remove the page from m2p_override we restore the original p2m of the page and we also restore the old pte of the kernel linear mapping. Before changing the p2m mappings in m2p_add_override and m2p_remove_override, check that the page passed as argument is valid and return an error if it is not. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Stefano Stabellini Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/grant-table.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 1afd5690858c..9ef54ebc1194 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -455,6 +455,8 @@ int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops, unsigned long mfn; ret = HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, map_ops, count); + if (ret) + return ret; for (i = 0; i < count; i++) { /* m2p override only supported for GNTMAP_contains_pte mappings */ @@ -463,7 +465,9 @@ int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops, pte = (pte_t *) (mfn_to_virt(PFN_DOWN(map_ops[i].host_addr)) + (map_ops[i].host_addr & ~PAGE_MASK)); mfn = pte_mfn(*pte); - m2p_add_override(mfn, pages[i]); + ret = m2p_add_override(mfn, pages[i]); + if (ret) + return ret; } return ret; @@ -476,8 +480,14 @@ int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops, int i, ret; ret = HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, unmap_ops, count); - for (i = 0; i < count; i++) - m2p_remove_override(pages[i]); + if (ret) + return ret; + + for (i = 0; i < count; i++) { + ret = m2p_remove_override(pages[i]); + if (ret) + return ret; + } return ret; } -- cgit v1.2.1 From cc8e7a355c1ec64b06a5b8126c47c5cb47f44fce Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 10 Jan 2011 21:23:16 +0100 Subject: PNP / ACPI: Use DEVICE_ACPI_HANDLE() for device ACPI handle access MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The PNP ACPI driver squirrels the ACPI handles of PNP devices' ACPI companions, but this isn't correct, because those handles should be accessed using the DEVICE_ACPI_HANDLE() macro operating on struct device objects. Using DEVICE_ACPI_HANDLE() in the PNP ACPI driver instead of the driver's own copies of the ACPI handles allows us to avoid a problem with docking stations where a machine docked before suspend to RAM and undocked while suspended crashes during the subsequent resume (in that case the ACPI companion of the PNP device in question doesn't exist any more while the device is being resumed). It also allows us to avoid the problem where suspend to RAM fails when the machine was undocked while suspended before (again, the ACPI companion of the PNP device is not present any more while it is being suspended). This change doesn't fix all of the the PNP ACPI driver's problems with PNP devices in docking stations (generally speaking, the driver has no idea that devices can come and go and doesn't even attempt to handle such events), but at least it makes suspend work for the users of docking stations who don't use the PNP devices located in there. References: https://bugzilla.kernel.org/show_bug.cgi?id=15100 Reported-and-tested-by: Toralf Förster Signed-off-by: Rafael J. Wysocki Acked-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/pnp/driver.c | 7 +++- drivers/pnp/pnpacpi/core.c | 93 +++++++++++++++++++++++++++++++++------------- 2 files changed, 72 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/pnp/driver.c b/drivers/pnp/driver.c index d1dbb9df53fa..00e94032531a 100644 --- a/drivers/pnp/driver.c +++ b/drivers/pnp/driver.c @@ -189,8 +189,11 @@ static int pnp_bus_resume(struct device *dev) if (!pnp_drv) return 0; - if (pnp_dev->protocol->resume) - pnp_dev->protocol->resume(pnp_dev); + if (pnp_dev->protocol->resume) { + error = pnp_dev->protocol->resume(pnp_dev); + if (error) + return error; + } if (pnp_can_write(pnp_dev)) { error = pnp_start_dev(pnp_dev); diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c index 57313f4658bc..ca84d5099ce7 100644 --- a/drivers/pnp/pnpacpi/core.c +++ b/drivers/pnp/pnpacpi/core.c @@ -81,12 +81,19 @@ static int pnpacpi_get_resources(struct pnp_dev *dev) static int pnpacpi_set_resources(struct pnp_dev *dev) { - struct acpi_device *acpi_dev = dev->data; - acpi_handle handle = acpi_dev->handle; + struct acpi_device *acpi_dev; + acpi_handle handle; struct acpi_buffer buffer; int ret; pnp_dbg(&dev->dev, "set resources\n"); + + handle = DEVICE_ACPI_HANDLE(&dev->dev); + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev))) { + dev_dbg(&dev->dev, "ACPI device not found in %s!\n", __func__); + return -ENODEV; + } + ret = pnpacpi_build_resource_template(dev, &buffer); if (ret) return ret; @@ -105,12 +112,18 @@ static int pnpacpi_set_resources(struct pnp_dev *dev) static int pnpacpi_disable_resources(struct pnp_dev *dev) { - struct acpi_device *acpi_dev = dev->data; - acpi_handle handle = acpi_dev->handle; + struct acpi_device *acpi_dev; + acpi_handle handle; int ret; dev_dbg(&dev->dev, "disable resources\n"); + handle = DEVICE_ACPI_HANDLE(&dev->dev); + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev))) { + dev_dbg(&dev->dev, "ACPI device not found in %s!\n", __func__); + return 0; + } + /* acpi_unregister_gsi(pnp_irq(dev, 0)); */ ret = 0; if (acpi_bus_power_manageable(handle)) @@ -124,46 +137,74 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev) #ifdef CONFIG_ACPI_SLEEP static bool pnpacpi_can_wakeup(struct pnp_dev *dev) { - struct acpi_device *acpi_dev = dev->data; - acpi_handle handle = acpi_dev->handle; + struct acpi_device *acpi_dev; + acpi_handle handle; + + handle = DEVICE_ACPI_HANDLE(&dev->dev); + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev))) { + dev_dbg(&dev->dev, "ACPI device not found in %s!\n", __func__); + return false; + } return acpi_bus_can_wakeup(handle); } static int pnpacpi_suspend(struct pnp_dev *dev, pm_message_t state) { - struct acpi_device *acpi_dev = dev->data; - acpi_handle handle = acpi_dev->handle; - int power_state; + struct acpi_device *acpi_dev; + acpi_handle handle; + int error = 0; + + handle = DEVICE_ACPI_HANDLE(&dev->dev); + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev))) { + dev_dbg(&dev->dev, "ACPI device not found in %s!\n", __func__); + return 0; + } if (device_can_wakeup(&dev->dev)) { - int rc = acpi_pm_device_sleep_wake(&dev->dev, + error = acpi_pm_device_sleep_wake(&dev->dev, device_may_wakeup(&dev->dev)); + if (error) + return error; + } + + if (acpi_bus_power_manageable(handle)) { + int power_state = acpi_pm_device_sleep_state(&dev->dev, NULL); + + if (power_state < 0) + power_state = (state.event == PM_EVENT_ON) ? + ACPI_STATE_D0 : ACPI_STATE_D3; - if (rc) - return rc; + /* + * acpi_bus_set_power() often fails (keyboard port can't be + * powered-down?), and in any case, our return value is ignored + * by pnp_bus_suspend(). Hence we don't revert the wakeup + * setting if the set_power fails. + */ + error = acpi_bus_set_power(handle, power_state); } - power_state = acpi_pm_device_sleep_state(&dev->dev, NULL); - if (power_state < 0) - power_state = (state.event == PM_EVENT_ON) ? - ACPI_STATE_D0 : ACPI_STATE_D3; - - /* acpi_bus_set_power() often fails (keyboard port can't be - * powered-down?), and in any case, our return value is ignored - * by pnp_bus_suspend(). Hence we don't revert the wakeup - * setting if the set_power fails. - */ - return acpi_bus_set_power(handle, power_state); + + return error; } static int pnpacpi_resume(struct pnp_dev *dev) { - struct acpi_device *acpi_dev = dev->data; - acpi_handle handle = acpi_dev->handle; + struct acpi_device *acpi_dev; + acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev); + int error = 0; + + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev))) { + dev_dbg(&dev->dev, "ACPI device not found in %s!\n", __func__); + return -ENODEV; + } if (device_may_wakeup(&dev->dev)) acpi_pm_device_sleep_wake(&dev->dev, false); - return acpi_bus_set_power(handle, ACPI_STATE_D0); + + if (acpi_bus_power_manageable(handle)) + error = acpi_bus_set_power(handle, ACPI_STATE_D0); + + return error; } #endif -- cgit v1.2.1 From bf572541ab44240163eaa2d486b06f306a31d45a Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 12 Jan 2011 09:03:35 +1100 Subject: md: fix regression with re-adding devices to arrays with no metadata Commit 1a855a0606 (2.6.37-rc4) fixed a problem where devices were re-added when they shouldn't be but caused a regression in a less common case that means sometimes devices cannot be re-added when they should be. In particular, when re-adding a device to an array without metadata we should always access the device, but after the above commit we didn't. This patch sets the In_sync flag in that case so that the re-add succeeds. This patch is suitable for any -stable kernel to which 1a855a0606 was applied. Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/md.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 175c424f201f..0da25daea9be 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5159,9 +5159,10 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info) /* set saved_raid_disk if appropriate */ if (!mddev->persistent) { if (info->state & (1<raid_disk < mddev->raid_disks) + info->raid_disk < mddev->raid_disks) { rdev->raid_disk = info->raid_disk; - else + set_bit(In_sync, &rdev->flags); + } else rdev->raid_disk = -1; } else super_types[mddev->major_version]. -- cgit v1.2.1 From 5b026c4e3af52fda22c9313a3388344f82f3ba15 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 11 Jan 2011 23:25:30 -0500 Subject: SFI: use ioremap_cache() instead of ioremap() We copied ACPI's oversight of using ioremap() and creating non-cached table mappings when we should have been using ioremap_cache(). Signed-off-by: Len Brown --- drivers/sfi/sfi_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/sfi/sfi_core.c b/drivers/sfi/sfi_core.c index ceba593dc84f..04113e5304a0 100644 --- a/drivers/sfi/sfi_core.c +++ b/drivers/sfi/sfi_core.c @@ -101,7 +101,7 @@ static void __iomem * __ref sfi_map_memory(u64 phys, u32 size) return NULL; if (sfi_use_ioremap) - return ioremap(phys, size); + return ioremap_cache(phys, size); else return early_ioremap(phys, size); } -- cgit v1.2.1 From eb4a7cbf27082bea34764bab3bc85595683f967b Mon Sep 17 00:00:00 2001 From: "John L. Burr" Date: Tue, 11 Jan 2011 20:39:46 -0800 Subject: IB/mthca: Fix driver when sizeof (phys_addr_t) > sizeof (long) Some systems have PCI addresses that don't fit in unsigned long (eg some 32-bit PowerPC 440 systems have 36-bit bus addresses). Fix up the driver by using phys_addr_t where appropriate, so we don't truncate any PCI resource addresses before ioremapping them. Signed-off-by: John L. Burr [ Update to apply to current driver source. - Roland ] Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_catas.c | 5 +++-- drivers/infiniband/hw/mthca/mthca_cmd.c | 2 +- drivers/infiniband/hw/mthca/mthca_eq.c | 2 +- drivers/infiniband/hw/mthca/mthca_main.c | 2 +- drivers/infiniband/hw/mthca/mthca_mr.c | 2 +- 5 files changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_catas.c b/drivers/infiniband/hw/mthca/mthca_catas.c index 0aa0110e4b6c..e4a08c2819e4 100644 --- a/drivers/infiniband/hw/mthca/mthca_catas.c +++ b/drivers/infiniband/hw/mthca/mthca_catas.c @@ -146,7 +146,7 @@ static void poll_catas(unsigned long dev_ptr) void mthca_start_catas_poll(struct mthca_dev *dev) { - unsigned long addr; + phys_addr_t addr; init_timer(&dev->catas_err.timer); dev->catas_err.map = NULL; @@ -158,7 +158,8 @@ void mthca_start_catas_poll(struct mthca_dev *dev) dev->catas_err.map = ioremap(addr, dev->catas_err.size * 4); if (!dev->catas_err.map) { mthca_warn(dev, "couldn't map catastrophic error region " - "at 0x%lx/0x%x\n", addr, dev->catas_err.size * 4); + "at 0x%llx/0x%x\n", (unsigned long long) addr, + dev->catas_err.size * 4); return; } diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index f4ceecd9684b..7bfa2a164955 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -713,7 +713,7 @@ int mthca_RUN_FW(struct mthca_dev *dev, u8 *status) static void mthca_setup_cmd_doorbells(struct mthca_dev *dev, u64 base) { - unsigned long addr; + phys_addr_t addr; u16 max_off = 0; int i; diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c index 8e8c728aff88..76785c653c13 100644 --- a/drivers/infiniband/hw/mthca/mthca_eq.c +++ b/drivers/infiniband/hw/mthca/mthca_eq.c @@ -653,7 +653,7 @@ static int mthca_map_reg(struct mthca_dev *dev, unsigned long offset, unsigned long size, void __iomem **map) { - unsigned long base = pci_resource_start(dev->pdev, 0); + phys_addr_t base = pci_resource_start(dev->pdev, 0); *map = ioremap(base + offset, size); if (!*map) diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 5eee6665919a..8a40cd539ab1 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -790,7 +790,7 @@ static int mthca_setup_hca(struct mthca_dev *dev) goto err_uar_table_free; } - dev->kar = ioremap(dev->driver_uar.pfn << PAGE_SHIFT, PAGE_SIZE); + dev->kar = ioremap((phys_addr_t) dev->driver_uar.pfn << PAGE_SHIFT, PAGE_SIZE); if (!dev->kar) { mthca_err(dev, "Couldn't map kernel access region, " "aborting.\n"); diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c index 065b20899876..44045c8846db 100644 --- a/drivers/infiniband/hw/mthca/mthca_mr.c +++ b/drivers/infiniband/hw/mthca/mthca_mr.c @@ -853,7 +853,7 @@ void mthca_arbel_fmr_unmap(struct mthca_dev *dev, struct mthca_fmr *fmr) int mthca_init_mr_table(struct mthca_dev *dev) { - unsigned long addr; + phys_addr_t addr; int mpts, mtts, err, i; err = mthca_alloc_init(&dev->mr_table.mpt_alloc, -- cgit v1.2.1 From 4cb18728709683c91a5f6f8d5f337bfb498b089a Mon Sep 17 00:00:00 2001 From: "R.Durgadoss" Date: Wed, 27 Oct 2010 03:33:29 +0530 Subject: thermal: Add event notification to thermal framework This patch adds event notification support to the generic thermal sysfs framework in the kernel. The notification is in the form of a netlink event. Signed-off-by: R.Durgadoss Signed-off-by: Len Brown --- drivers/thermal/Kconfig | 1 + drivers/thermal/thermal_sys.c | 103 +++++++++++++++++++++++++++++++++++++++++- 2 files changed, 103 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index bf7c687519ef..f7a5dba3ca23 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -4,6 +4,7 @@ menuconfig THERMAL tristate "Generic Thermal sysfs driver" + depends on NET help Generic Thermal Sysfs driver offers a generic mechanism for thermal management. Usually it's made up of one or more thermal diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 13c72c629329..760e045c93c8 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -32,6 +32,8 @@ #include #include #include +#include +#include MODULE_AUTHOR("Zhang Rui"); MODULE_DESCRIPTION("Generic thermal management sysfs support"); @@ -58,6 +60,22 @@ static LIST_HEAD(thermal_tz_list); static LIST_HEAD(thermal_cdev_list); static DEFINE_MUTEX(thermal_list_lock); +static unsigned int thermal_event_seqnum; + +static struct genl_family thermal_event_genl_family = { + .id = GENL_ID_GENERATE, + .name = THERMAL_GENL_FAMILY_NAME, + .version = THERMAL_GENL_VERSION, + .maxattr = THERMAL_GENL_ATTR_MAX, +}; + +static struct genl_multicast_group thermal_event_mcgrp = { + .name = THERMAL_GENL_MCAST_GROUP_NAME, +}; + +static int genetlink_init(void); +static void genetlink_exit(void); + static int get_idr(struct idr *idr, struct mutex *lock, int *id) { int err; @@ -1214,6 +1232,82 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz) EXPORT_SYMBOL(thermal_zone_device_unregister); +int generate_netlink_event(u32 orig, enum events event) +{ + struct sk_buff *skb; + struct nlattr *attr; + struct thermal_genl_event *thermal_event; + void *msg_header; + int size; + int result; + + /* allocate memory */ + size = nla_total_size(sizeof(struct thermal_genl_event)) + \ + nla_total_size(0); + + skb = genlmsg_new(size, GFP_ATOMIC); + if (!skb) + return -ENOMEM; + + /* add the genetlink message header */ + msg_header = genlmsg_put(skb, 0, thermal_event_seqnum++, + &thermal_event_genl_family, 0, + THERMAL_GENL_CMD_EVENT); + if (!msg_header) { + nlmsg_free(skb); + return -ENOMEM; + } + + /* fill the data */ + attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT, \ + sizeof(struct thermal_genl_event)); + + if (!attr) { + nlmsg_free(skb); + return -EINVAL; + } + + thermal_event = nla_data(attr); + if (!thermal_event) { + nlmsg_free(skb); + return -EINVAL; + } + + memset(thermal_event, 0, sizeof(struct thermal_genl_event)); + + thermal_event->orig = orig; + thermal_event->event = event; + + /* send multicast genetlink message */ + result = genlmsg_end(skb, msg_header); + if (result < 0) { + nlmsg_free(skb); + return result; + } + + result = genlmsg_multicast(skb, 0, thermal_event_mcgrp.id, GFP_ATOMIC); + if (result) + printk(KERN_INFO "failed to send netlink event:%d", result); + + return result; +} +EXPORT_SYMBOL(generate_netlink_event); + +static int genetlink_init(void) +{ + int result; + + result = genl_register_family(&thermal_event_genl_family); + if (result) + return result; + + result = genl_register_mc_group(&thermal_event_genl_family, + &thermal_event_mcgrp); + if (result) + genl_unregister_family(&thermal_event_genl_family); + return result; +} + static int __init thermal_init(void) { int result = 0; @@ -1225,9 +1319,15 @@ static int __init thermal_init(void) mutex_destroy(&thermal_idr_lock); mutex_destroy(&thermal_list_lock); } + result = genetlink_init(); return result; } +static void genetlink_exit(void) +{ + genl_unregister_family(&thermal_event_genl_family); +} + static void __exit thermal_exit(void) { class_unregister(&thermal_class); @@ -1235,7 +1335,8 @@ static void __exit thermal_exit(void) idr_destroy(&thermal_cdev_idr); mutex_destroy(&thermal_idr_lock); mutex_destroy(&thermal_list_lock); + genetlink_exit(); } -subsys_initcall(thermal_init); +fs_initcall(thermal_init); module_exit(thermal_exit); -- cgit v1.2.1 From 4464ed3b05de7a41ae55c74109cec8aeb138ce14 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 10 Jan 2011 11:16:26 +0800 Subject: ACPI: update CONFIG_ACPI_PROCFS description Update CONFIG_ACPI_PROCFS description because the processor, video and thermal zone procfs I/F have been removed. Some ACPI drivers, e.g. button, have their procfs I/F always built in, because we don't have sysfs I/F replacement at the moment. But once we finish developing the sysfs I/F for these driver, we need CONFIG_ACPI_PROCFS to enabled/disable the corresponding procfs I/F. So just updating the description rather than removing this option, although there is no procfs I/F depends on it for now. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/Kconfig | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index a0c03658b2ea..ad370a1fe2e4 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -51,12 +51,7 @@ config ACPI_PROCFS For backwards compatibility, this option allows deprecated /proc/acpi/ files to exist, even when they have been replaced by functions in /sys. - The deprecated files (and their replacements) include: - /proc/acpi/processor/*/throttling (/sys/class/thermal/ - cooling_device*/*) - /proc/acpi/video/*/brightness (/sys/class/backlight/) - /proc/acpi/thermal_zone/*/* (/sys/class/thermal/) This option has no effect on /proc/acpi/ files and functions which do not yet exist in /sys. -- cgit v1.2.1 From 6d855fcdd24d2491455527c4999b4d04363f1980 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 10 Jan 2011 11:16:30 +0800 Subject: ACPI: delete CONFIG_ACPI_PROCFS_POWER and power procfs I/F in 2.6.39 sysfs I/F for ACPI power devices, including AC and Battery, has been working in upstream kenrel since 2.6.24, Sep 2007. In 2.6.37, we made the sysfs I/F always built in and this option disabled by default. Now, we plan to remove this option and the ACPI power procfs interface in 2.6.39. First, update the feature-removal-schedule to announce this change. Second, add runtime warnings in ACPI AC/Battery/SBS driver, so that users will notice this change even if "make oldconfig" is used. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/Kconfig | 2 ++ drivers/acpi/ac.c | 3 ++- drivers/acpi/battery.c | 2 ++ drivers/acpi/sbs.c | 2 ++ 4 files changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 5959077be0a4..788e88eb18ec 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -70,6 +70,8 @@ config ACPI_PROCFS_POWER /proc/acpi/ac_adapter/* (sys/class/power_supply/*) This option has no effect on /proc/acpi/ directories and functions, which do not yet exist in /sys + This option, together with the proc directories, will be + deleted in 2.6.39. Say N to delete power /proc/acpi/ directories that have moved to /sys/ diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index ba9afeaa23ac..f441e92481f6 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -185,7 +185,8 @@ static int acpi_ac_add_fs(struct acpi_device *device) { struct proc_dir_entry *entry = NULL; - + printk(KERN_WARNING PREFIX "Deprecated procfs I/F for AC is loaded," + " please retry with CONFIG_ACPI_PROCFS_POWER cleared\n"); if (!acpi_device_dir(device)) { acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device), acpi_ac_dir); diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 95649d373071..2a31421e0d75 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -868,6 +868,8 @@ static int acpi_battery_add_fs(struct acpi_device *device) struct proc_dir_entry *entry = NULL; int i; + printk(KERN_WARNING PREFIX "Deprecated procfs I/F for battery is loaded," + " please retry with CONFIG_ACPI_PROCFS_POWER cleared\n"); if (!acpi_device_dir(device)) { acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device), acpi_battery_dir); diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index e5dbedb16bbf..51ae3794ec7f 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -484,6 +484,8 @@ acpi_sbs_add_fs(struct proc_dir_entry **dir, const struct file_operations *state_fops, const struct file_operations *alarm_fops, void *data) { + printk(KERN_WARNING PREFIX "Deprecated procfs I/F for SBS is loaded," + " please retry with CONFIG_ACPI_PROCFS_POWER cleared\n"); if (!*dir) { *dir = proc_mkdir(dir_name, parent_dir); if (!*dir) { -- cgit v1.2.1 From 2cf0c58ed970b91e620e551d4c8da8b1d0baab49 Mon Sep 17 00:00:00 2001 From: Darius Augulis Date: Wed, 12 Jan 2011 14:50:51 +0900 Subject: serial: samsung: fix device name Swap device and driver names in serial/samsung.c Signed-off-by: Darius Augulis Cc: Ben Dooks Signed-off-by: Kukjin Kim --- drivers/serial/samsung.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index 7ac2bf5167cd..2335edafe903 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -883,10 +883,10 @@ static struct uart_ops s3c24xx_serial_ops = { static struct uart_driver s3c24xx_uart_drv = { .owner = THIS_MODULE, - .dev_name = "s3c2410_serial", + .driver_name = "s3c2410_serial", .nr = CONFIG_SERIAL_SAMSUNG_UARTS, .cons = S3C24XX_SERIAL_CONSOLE, - .driver_name = S3C24XX_SERIAL_NAME, + .dev_name = S3C24XX_SERIAL_NAME, .major = S3C24XX_SERIAL_MAJOR, .minor = S3C24XX_SERIAL_MINOR, }; -- cgit v1.2.1 From 81e88fdc432a1552401d6e91a984dcccce72b8dc Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Wed, 12 Jan 2011 14:44:55 +0800 Subject: ACPI, APEI, Generic Hardware Error Source POLL/IRQ/NMI notification type support Generic Hardware Error Source provides a way to report platform hardware errors (such as that from chipset). It works in so called "Firmware First" mode, that is, hardware errors are reported to firmware firstly, then reported to Linux by firmware. This way, some non-standard hardware error registers or non-standard hardware link can be checked by firmware to produce more valuable hardware error information for Linux. This patch adds POLL/IRQ/NMI notification types support. Because the memory area used to transfer hardware error information from BIOS to Linux can be determined only in NMI, IRQ or timer handler, but general ioremap can not be used in atomic context, so a special version of atomic ioremap is implemented for that. Known issue: - Error information can not be printed for recoverable errors notified via NMI, because printk is not NMI-safe. Will fix this via delay printing to IRQ context via irq_work or make printk NMI-safe. v2: - adjust printk format per comments. Signed-off-by: Huang Ying Reviewed-by: Andi Kleen Signed-off-by: Len Brown --- drivers/acpi/apei/ghes.c | 406 +++++++++++++++++++++++++++++++++++++---------- 1 file changed, 322 insertions(+), 84 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index 51905d07a4d9..d1d484d4a06a 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -12,10 +12,6 @@ * For more information about Generic Hardware Error Source, please * refer to ACPI Specification version 4.0, section 17.3.2.6 * - * Now, only SCI notification type and memory errors are - * supported. More notification type and hardware error type will be - * added later. - * * Copyright 2010 Intel Corp. * Author: Huang Ying * @@ -39,15 +35,18 @@ #include #include #include +#include #include #include #include #include #include +#include #include #include #include #include +#include #include "apei-internal.h" @@ -56,42 +55,131 @@ #define GHES_ESTATUS_MAX_SIZE 65536 /* - * One struct ghes is created for each generic hardware error - * source. - * + * One struct ghes is created for each generic hardware error source. * It provides the context for APEI hardware error timer/IRQ/SCI/NMI - * handler. Handler for one generic hardware error source is only - * triggered after the previous one is done. So handler can uses - * struct ghes without locking. + * handler. * * estatus: memory buffer for error status block, allocated during * HEST parsing. */ #define GHES_TO_CLEAR 0x0001 +#define GHES_EXITING 0x0002 struct ghes { struct acpi_hest_generic *generic; struct acpi_hest_generic_status *estatus; - struct list_head list; u64 buffer_paddr; unsigned long flags; + union { + struct list_head list; + struct timer_list timer; + unsigned int irq; + }; }; +static int ghes_panic_timeout __read_mostly = 30; + /* - * Error source lists, one list for each notification method. The - * members in lists are struct ghes. + * All error sources notified with SCI shares one notifier function, + * so they need to be linked and checked one by one. This is applied + * to NMI too. * - * The list members are only added in HEST parsing and deleted during - * module_exit, that is, single-threaded. So no lock is needed for - * that. - * - * But the mutual exclusion is needed between members adding/deleting - * and timer/IRQ/SCI/NMI handler, which may traverse the list. RCU is - * used for that. + * RCU is used for these lists, so ghes_list_mutex is only used for + * list changing, not for traversing. */ static LIST_HEAD(ghes_sci); +static LIST_HEAD(ghes_nmi); static DEFINE_MUTEX(ghes_list_mutex); +/* + * NMI may be triggered on any CPU, so ghes_nmi_lock is used for + * mutual exclusion. + */ +static DEFINE_RAW_SPINLOCK(ghes_nmi_lock); + +/* + * Because the memory area used to transfer hardware error information + * from BIOS to Linux can be determined only in NMI, IRQ or timer + * handler, but general ioremap can not be used in atomic context, so + * a special version of atomic ioremap is implemented for that. + */ + +/* + * Two virtual pages are used, one for NMI context, the other for + * IRQ/PROCESS context + */ +#define GHES_IOREMAP_PAGES 2 +#define GHES_IOREMAP_NMI_PAGE(base) (base) +#define GHES_IOREMAP_IRQ_PAGE(base) ((base) + PAGE_SIZE) + +/* virtual memory area for atomic ioremap */ +static struct vm_struct *ghes_ioremap_area; +/* + * These 2 spinlock is used to prevent atomic ioremap virtual memory + * area from being mapped simultaneously. + */ +static DEFINE_RAW_SPINLOCK(ghes_ioremap_lock_nmi); +static DEFINE_SPINLOCK(ghes_ioremap_lock_irq); + +static int ghes_ioremap_init(void) +{ + ghes_ioremap_area = __get_vm_area(PAGE_SIZE * GHES_IOREMAP_PAGES, + VM_IOREMAP, VMALLOC_START, VMALLOC_END); + if (!ghes_ioremap_area) { + pr_err(GHES_PFX "Failed to allocate virtual memory area for atomic ioremap.\n"); + return -ENOMEM; + } + + return 0; +} + +static void ghes_ioremap_exit(void) +{ + free_vm_area(ghes_ioremap_area); +} + +static void __iomem *ghes_ioremap_pfn_nmi(u64 pfn) +{ + unsigned long vaddr; + + vaddr = (unsigned long)GHES_IOREMAP_NMI_PAGE(ghes_ioremap_area->addr); + ioremap_page_range(vaddr, vaddr + PAGE_SIZE, + pfn << PAGE_SHIFT, PAGE_KERNEL); + + return (void __iomem *)vaddr; +} + +static void __iomem *ghes_ioremap_pfn_irq(u64 pfn) +{ + unsigned long vaddr; + + vaddr = (unsigned long)GHES_IOREMAP_IRQ_PAGE(ghes_ioremap_area->addr); + ioremap_page_range(vaddr, vaddr + PAGE_SIZE, + pfn << PAGE_SHIFT, PAGE_KERNEL); + + return (void __iomem *)vaddr; +} + +static void ghes_iounmap_nmi(void __iomem *vaddr_ptr) +{ + unsigned long vaddr = (unsigned long __force)vaddr_ptr; + void *base = ghes_ioremap_area->addr; + + BUG_ON(vaddr != (unsigned long)GHES_IOREMAP_NMI_PAGE(base)); + unmap_kernel_range_noflush(vaddr, PAGE_SIZE); + __flush_tlb_one(vaddr); +} + +static void ghes_iounmap_irq(void __iomem *vaddr_ptr) +{ + unsigned long vaddr = (unsigned long __force)vaddr_ptr; + void *base = ghes_ioremap_area->addr; + + BUG_ON(vaddr != (unsigned long)GHES_IOREMAP_IRQ_PAGE(base)); + unmap_kernel_range_noflush(vaddr, PAGE_SIZE); + __flush_tlb_one(vaddr); +} + static struct ghes *ghes_new(struct acpi_hest_generic *generic) { struct ghes *ghes; @@ -102,7 +190,6 @@ static struct ghes *ghes_new(struct acpi_hest_generic *generic) if (!ghes) return ERR_PTR(-ENOMEM); ghes->generic = generic; - INIT_LIST_HEAD(&ghes->list); rc = acpi_pre_map_gar(&generic->error_status_address); if (rc) goto err_free; @@ -159,22 +246,41 @@ static inline int ghes_severity(int severity) } } -/* SCI handler run in work queue, so ioremap can be used here */ -static int ghes_copy_tofrom_phys(void *buffer, u64 paddr, u32 len, - int from_phys) +static void ghes_copy_tofrom_phys(void *buffer, u64 paddr, u32 len, + int from_phys) { - void *vaddr; - - vaddr = ioremap_cache(paddr, len); - if (!vaddr) - return -ENOMEM; - if (from_phys) - memcpy(buffer, vaddr, len); - else - memcpy(vaddr, buffer, len); - iounmap(vaddr); - - return 0; + void __iomem *vaddr; + unsigned long flags = 0; + int in_nmi = in_nmi(); + u64 offset; + u32 trunk; + + while (len > 0) { + offset = paddr - (paddr & PAGE_MASK); + if (in_nmi) { + raw_spin_lock(&ghes_ioremap_lock_nmi); + vaddr = ghes_ioremap_pfn_nmi(paddr >> PAGE_SHIFT); + } else { + spin_lock_irqsave(&ghes_ioremap_lock_irq, flags); + vaddr = ghes_ioremap_pfn_irq(paddr >> PAGE_SHIFT); + } + trunk = PAGE_SIZE - offset; + trunk = min(trunk, len); + if (from_phys) + memcpy_fromio(buffer, vaddr + offset, trunk); + else + memcpy_toio(vaddr + offset, buffer, trunk); + len -= trunk; + paddr += trunk; + buffer += trunk; + if (in_nmi) { + ghes_iounmap_nmi(vaddr); + raw_spin_unlock(&ghes_ioremap_lock_nmi); + } else { + ghes_iounmap_irq(vaddr); + spin_unlock_irqrestore(&ghes_ioremap_lock_irq, flags); + } + } } static int ghes_read_estatus(struct ghes *ghes, int silent) @@ -195,10 +301,8 @@ static int ghes_read_estatus(struct ghes *ghes, int silent) if (!buf_paddr) return -ENOENT; - rc = ghes_copy_tofrom_phys(ghes->estatus, buf_paddr, - sizeof(*ghes->estatus), 1); - if (rc) - return rc; + ghes_copy_tofrom_phys(ghes->estatus, buf_paddr, + sizeof(*ghes->estatus), 1); if (!ghes->estatus->block_status) return -ENOENT; @@ -213,17 +317,15 @@ static int ghes_read_estatus(struct ghes *ghes, int silent) goto err_read_block; if (apei_estatus_check_header(ghes->estatus)) goto err_read_block; - rc = ghes_copy_tofrom_phys(ghes->estatus + 1, - buf_paddr + sizeof(*ghes->estatus), - len - sizeof(*ghes->estatus), 1); - if (rc) - return rc; + ghes_copy_tofrom_phys(ghes->estatus + 1, + buf_paddr + sizeof(*ghes->estatus), + len - sizeof(*ghes->estatus), 1); if (apei_estatus_check(ghes->estatus)) goto err_read_block; rc = 0; err_read_block: - if (rc && !silent) + if (rc && !silent && printk_ratelimit()) pr_warning(FW_WARN GHES_PFX "Failed to read error status block!\n"); return rc; @@ -293,6 +395,42 @@ out: return 0; } +static void ghes_add_timer(struct ghes *ghes) +{ + struct acpi_hest_generic *g = ghes->generic; + unsigned long expire; + + if (!g->notify.poll_interval) { + pr_warning(FW_WARN GHES_PFX "Poll interval is 0 for generic hardware error source: %d, disabled.\n", + g->header.source_id); + return; + } + expire = jiffies + msecs_to_jiffies(g->notify.poll_interval); + ghes->timer.expires = round_jiffies_relative(expire); + add_timer(&ghes->timer); +} + +static void ghes_poll_func(unsigned long data) +{ + struct ghes *ghes = (void *)data; + + ghes_proc(ghes); + if (!(ghes->flags & GHES_EXITING)) + ghes_add_timer(ghes); +} + +static irqreturn_t ghes_irq_func(int irq, void *data) +{ + struct ghes *ghes = data; + int rc; + + rc = ghes_proc(ghes); + if (rc) + return IRQ_NONE; + + return IRQ_HANDLED; +} + static int ghes_notify_sci(struct notifier_block *this, unsigned long event, void *data) { @@ -309,10 +447,63 @@ static int ghes_notify_sci(struct notifier_block *this, return ret; } +static int ghes_notify_nmi(struct notifier_block *this, + unsigned long cmd, void *data) +{ + struct ghes *ghes, *ghes_global = NULL; + int sev, sev_global = -1; + int ret = NOTIFY_DONE; + + if (cmd != DIE_NMI) + return ret; + + raw_spin_lock(&ghes_nmi_lock); + list_for_each_entry_rcu(ghes, &ghes_nmi, list) { + if (ghes_read_estatus(ghes, 1)) { + ghes_clear_estatus(ghes); + continue; + } + sev = ghes_severity(ghes->estatus->error_severity); + if (sev > sev_global) { + sev_global = sev; + ghes_global = ghes; + } + ret = NOTIFY_STOP; + } + + if (ret == NOTIFY_DONE) + goto out; + + if (sev_global >= GHES_SEV_PANIC) { + oops_begin(); + ghes_print_estatus(KERN_EMERG HW_ERR, ghes_global); + /* reboot to log the error! */ + if (panic_timeout == 0) + panic_timeout = ghes_panic_timeout; + panic("Fatal hardware error!"); + } + + list_for_each_entry_rcu(ghes, &ghes_nmi, list) { + if (!(ghes->flags & GHES_TO_CLEAR)) + continue; + /* Do not print estatus because printk is not NMI safe */ + ghes_do_proc(ghes); + ghes_clear_estatus(ghes); + } + +out: + raw_spin_unlock(&ghes_nmi_lock); + return ret; +} + static struct notifier_block ghes_notifier_sci = { .notifier_call = ghes_notify_sci, }; +static struct notifier_block ghes_notifier_nmi = { + .notifier_call = ghes_notify_nmi, +}; + static int __devinit ghes_probe(struct platform_device *ghes_dev) { struct acpi_hest_generic *generic; @@ -323,18 +514,27 @@ static int __devinit ghes_probe(struct platform_device *ghes_dev) if (!generic->enabled) return -ENODEV; - if (generic->error_block_length < - sizeof(struct acpi_hest_generic_status)) { - pr_warning(FW_BUG GHES_PFX -"Invalid error block length: %u for generic hardware error source: %d\n", - generic->error_block_length, + switch (generic->notify.type) { + case ACPI_HEST_NOTIFY_POLLED: + case ACPI_HEST_NOTIFY_EXTERNAL: + case ACPI_HEST_NOTIFY_SCI: + case ACPI_HEST_NOTIFY_NMI: + break; + case ACPI_HEST_NOTIFY_LOCAL: + pr_warning(GHES_PFX "Generic hardware error source: %d notified via local interrupt is not supported!\n", generic->header.source_id); goto err; + default: + pr_warning(FW_WARN GHES_PFX "Unknown notification type: %u for generic hardware error source: %d\n", + generic->notify.type, generic->header.source_id); + goto err; } - if (generic->records_to_preallocate == 0) { - pr_warning(FW_BUG GHES_PFX -"Invalid records to preallocate: %u for generic hardware error source: %d\n", - generic->records_to_preallocate, + + rc = -EIO; + if (generic->error_block_length < + sizeof(struct acpi_hest_generic_status)) { + pr_warning(FW_BUG GHES_PFX "Invalid error block length: %u for generic hardware error source: %d\n", + generic->error_block_length, generic->header.source_id); goto err; } @@ -344,38 +544,43 @@ static int __devinit ghes_probe(struct platform_device *ghes_dev) ghes = NULL; goto err; } - if (generic->notify.type == ACPI_HEST_NOTIFY_SCI) { + switch (generic->notify.type) { + case ACPI_HEST_NOTIFY_POLLED: + ghes->timer.function = ghes_poll_func; + ghes->timer.data = (unsigned long)ghes; + init_timer_deferrable(&ghes->timer); + ghes_add_timer(ghes); + break; + case ACPI_HEST_NOTIFY_EXTERNAL: + /* External interrupt vector is GSI */ + if (acpi_gsi_to_irq(generic->notify.vector, &ghes->irq)) { + pr_err(GHES_PFX "Failed to map GSI to IRQ for generic hardware error source: %d\n", + generic->header.source_id); + goto err; + } + if (request_irq(ghes->irq, ghes_irq_func, + 0, "GHES IRQ", ghes)) { + pr_err(GHES_PFX "Failed to register IRQ for generic hardware error source: %d\n", + generic->header.source_id); + goto err; + } + break; + case ACPI_HEST_NOTIFY_SCI: mutex_lock(&ghes_list_mutex); if (list_empty(&ghes_sci)) register_acpi_hed_notifier(&ghes_notifier_sci); list_add_rcu(&ghes->list, &ghes_sci); mutex_unlock(&ghes_list_mutex); - } else { - unsigned char *notify = NULL; - - switch (generic->notify.type) { - case ACPI_HEST_NOTIFY_POLLED: - notify = "POLL"; - break; - case ACPI_HEST_NOTIFY_EXTERNAL: - case ACPI_HEST_NOTIFY_LOCAL: - notify = "IRQ"; - break; - case ACPI_HEST_NOTIFY_NMI: - notify = "NMI"; - break; - } - if (notify) { - pr_warning(GHES_PFX -"Generic hardware error source: %d notified via %s is not supported!\n", - generic->header.source_id, notify); - } else { - pr_warning(FW_WARN GHES_PFX -"Unknown notification type: %u for generic hardware error source: %d\n", - generic->notify.type, generic->header.source_id); - } - rc = -ENODEV; - goto err; + break; + case ACPI_HEST_NOTIFY_NMI: + mutex_lock(&ghes_list_mutex); + if (list_empty(&ghes_nmi)) + register_die_notifier(&ghes_notifier_nmi); + list_add_rcu(&ghes->list, &ghes_nmi); + mutex_unlock(&ghes_list_mutex); + break; + default: + BUG(); } platform_set_drvdata(ghes_dev, ghes); @@ -396,7 +601,14 @@ static int __devexit ghes_remove(struct platform_device *ghes_dev) ghes = platform_get_drvdata(ghes_dev); generic = ghes->generic; + ghes->flags |= GHES_EXITING; switch (generic->notify.type) { + case ACPI_HEST_NOTIFY_POLLED: + del_timer_sync(&ghes->timer); + break; + case ACPI_HEST_NOTIFY_EXTERNAL: + free_irq(ghes->irq, ghes); + break; case ACPI_HEST_NOTIFY_SCI: mutex_lock(&ghes_list_mutex); list_del_rcu(&ghes->list); @@ -404,12 +616,23 @@ static int __devexit ghes_remove(struct platform_device *ghes_dev) unregister_acpi_hed_notifier(&ghes_notifier_sci); mutex_unlock(&ghes_list_mutex); break; + case ACPI_HEST_NOTIFY_NMI: + mutex_lock(&ghes_list_mutex); + list_del_rcu(&ghes->list); + if (list_empty(&ghes_nmi)) + unregister_die_notifier(&ghes_notifier_nmi); + mutex_unlock(&ghes_list_mutex); + /* + * To synchronize with NMI handler, ghes can only be + * freed after NMI handler finishes. + */ + synchronize_rcu(); + break; default: BUG(); break; } - synchronize_rcu(); ghes_fini(ghes); kfree(ghes); @@ -429,6 +652,8 @@ static struct platform_driver ghes_platform_driver = { static int __init ghes_init(void) { + int rc; + if (acpi_disabled) return -ENODEV; @@ -437,12 +662,25 @@ static int __init ghes_init(void) return -EINVAL; } - return platform_driver_register(&ghes_platform_driver); + rc = ghes_ioremap_init(); + if (rc) + goto err; + + rc = platform_driver_register(&ghes_platform_driver); + if (rc) + goto err_ioremap_exit; + + return 0; +err_ioremap_exit: + ghes_ioremap_exit(); +err: + return rc; } static void __exit ghes_exit(void) { platform_driver_unregister(&ghes_platform_driver); + ghes_ioremap_exit(); } module_init(ghes_init); -- cgit v1.2.1 From b17295e646562a2122ce84c1e55c9ae66fb6ae50 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Wed, 12 Jan 2011 09:55:10 +0100 Subject: [S390] cio: path_event overindication after resume While resuming report any found paths as new to the device drivers. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index e8391b89eff4..b7eaff9ca19e 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -1835,6 +1835,7 @@ static void __ccw_device_pm_restore(struct ccw_device *cdev) * available again. Kick re-detection. */ cdev->private->flags.resuming = 1; + cdev->private->path_new_mask = LPM_ANYPATH; css_schedule_eval(sch->schid); spin_unlock_irq(sch->lock); css_complete_work(); -- cgit v1.2.1 From 3cfd53d53f700a225716294842b1a843326dea21 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Mon, 13 Dec 2010 13:36:02 +0800 Subject: ACPICA: Move GPE functions to new file evxfgpe.c Create a new file evxfgpe.c and move GPE specific functions to it. Acked-by: Rafael J. Wysocki Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/Makefile | 2 +- drivers/acpi/acpica/acevents.h | 4 + drivers/acpi/acpica/evgpeutil.c | 39 +++ drivers/acpi/acpica/evxfevnt.c | 600 --------------------------------------- drivers/acpi/acpica/evxfgpe.c | 610 ++++++++++++++++++++++++++++++++++++++++ 5 files changed, 654 insertions(+), 601 deletions(-) create mode 100644 drivers/acpi/acpica/evxfgpe.c (limited to 'drivers') diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index a7e1d1aa4107..eec2eadd2431 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -14,7 +14,7 @@ acpi-y := dsfield.o dsmthdat.o dsopcode.o dswexec.o dswscope.o \ acpi-y += evevent.o evregion.o evsci.o evxfevnt.o \ evmisc.o evrgnini.o evxface.o evxfregn.o \ - evgpe.o evgpeblk.o evgpeinit.o evgpeutil.o + evgpe.o evgpeblk.o evgpeinit.o evgpeutil.o evxfgpe.o acpi-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\ exconvrt.o exfldio.o exoparg1.o exprep.o exresop.o exsystem.o\ diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index a6f99cc37a19..43f15c8cd2b2 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -138,6 +138,10 @@ acpi_ev_walk_gpe_list(acpi_gpe_callback gpe_walk_callback, void *context); u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info); +acpi_status +acpi_ev_get_gpe_device(struct acpi_gpe_xrupt_info *gpe_xrupt_info, + struct acpi_gpe_block_info *gpe_block, void *context); + struct acpi_gpe_xrupt_info *acpi_ev_get_gpe_xrupt_block(u32 interrupt_number); acpi_status acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt); diff --git a/drivers/acpi/acpica/evgpeutil.c b/drivers/acpi/acpica/evgpeutil.c index 19a0e513ea48..10e477494dcf 100644 --- a/drivers/acpi/acpica/evgpeutil.c +++ b/drivers/acpi/acpica/evgpeutil.c @@ -152,6 +152,45 @@ u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info) return (FALSE); } +/******************************************************************************* + * + * FUNCTION: acpi_ev_get_gpe_device + * + * PARAMETERS: GPE_WALK_CALLBACK + * + * RETURN: Status + * + * DESCRIPTION: Matches the input GPE index (0-current_gpe_count) with a GPE + * block device. NULL if the GPE is one of the FADT-defined GPEs. + * + ******************************************************************************/ + +acpi_status +acpi_ev_get_gpe_device(struct acpi_gpe_xrupt_info *gpe_xrupt_info, + struct acpi_gpe_block_info *gpe_block, void *context) +{ + struct acpi_gpe_device_info *info = context; + + /* Increment Index by the number of GPEs in this block */ + + info->next_block_base_index += gpe_block->gpe_count; + + if (info->index < info->next_block_base_index) { + /* + * The GPE index is within this block, get the node. Leave the node + * NULL for the FADT-defined GPEs + */ + if ((gpe_block->node)->type == ACPI_TYPE_DEVICE) { + info->gpe_device = gpe_block->node; + } + + info->status = AE_OK; + return (AE_CTRL_END); + } + + return (AE_OK); +} + /******************************************************************************* * * FUNCTION: acpi_ev_get_gpe_xrupt_block diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c index a1dabe3fd8ae..90488c1e0f3d 100644 --- a/drivers/acpi/acpica/evxfevnt.c +++ b/drivers/acpi/acpica/evxfevnt.c @@ -43,18 +43,11 @@ #include #include "accommon.h" -#include "acevents.h" -#include "acnamesp.h" #include "actables.h" #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evxfevnt") -/* Local prototypes */ -static acpi_status -acpi_ev_get_gpe_device(struct acpi_gpe_xrupt_info *gpe_xrupt_info, - struct acpi_gpe_block_info *gpe_block, void *context); - /******************************************************************************* * * FUNCTION: acpi_enable @@ -211,185 +204,6 @@ acpi_status acpi_enable_event(u32 event, u32 flags) ACPI_EXPORT_SYMBOL(acpi_enable_event) -/******************************************************************************* - * - * FUNCTION: acpi_gpe_wakeup - * - * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 - * gpe_number - GPE level within the GPE block - * Action - Enable or Disable - * - * RETURN: Status - * - * DESCRIPTION: Set or clear the GPE's wakeup enable mask bit. - * - ******************************************************************************/ -acpi_status acpi_gpe_wakeup(acpi_handle gpe_device, u32 gpe_number, u8 action) -{ - acpi_status status = AE_OK; - struct acpi_gpe_event_info *gpe_event_info; - struct acpi_gpe_register_info *gpe_register_info; - acpi_cpu_flags flags; - u32 register_bit; - - ACPI_FUNCTION_TRACE(acpi_gpe_wakeup); - - flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); - - /* Ensure that we have a valid GPE number */ - - gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); - if (!gpe_event_info || !(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) { - status = AE_BAD_PARAMETER; - goto unlock_and_exit; - } - - gpe_register_info = gpe_event_info->register_info; - if (!gpe_register_info) { - status = AE_NOT_EXIST; - goto unlock_and_exit; - } - - register_bit = - acpi_hw_get_gpe_register_bit(gpe_event_info, gpe_register_info); - - /* Perform the action */ - - switch (action) { - case ACPI_GPE_ENABLE: - ACPI_SET_BIT(gpe_register_info->enable_for_wake, - (u8)register_bit); - break; - - case ACPI_GPE_DISABLE: - ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake, - (u8)register_bit); - break; - - default: - ACPI_ERROR((AE_INFO, "%u, Invalid action", action)); - status = AE_BAD_PARAMETER; - break; - } - -unlock_and_exit: - acpi_os_release_lock(acpi_gbl_gpe_lock, flags); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_gpe_wakeup) - -/******************************************************************************* - * - * FUNCTION: acpi_enable_gpe - * - * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 - * gpe_number - GPE level within the GPE block - * - * RETURN: Status - * - * DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is - * hardware-enabled. - * - ******************************************************************************/ -acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number) -{ - acpi_status status = AE_BAD_PARAMETER; - struct acpi_gpe_event_info *gpe_event_info; - acpi_cpu_flags flags; - - ACPI_FUNCTION_TRACE(acpi_enable_gpe); - - flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); - - /* Ensure that we have a valid GPE number */ - - gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); - if (gpe_event_info) { - status = acpi_raw_enable_gpe(gpe_event_info); - } - - acpi_os_release_lock(acpi_gbl_gpe_lock, flags); - return_ACPI_STATUS(status); -} -ACPI_EXPORT_SYMBOL(acpi_enable_gpe) - -/******************************************************************************* - * - * FUNCTION: acpi_disable_gpe - * - * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 - * gpe_number - GPE level within the GPE block - * - * RETURN: Status - * - * DESCRIPTION: Remove a reference to a GPE. When the last reference is - * removed, only then is the GPE disabled (for runtime GPEs), or - * the GPE mask bit disabled (for wake GPEs) - * - ******************************************************************************/ -acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number) -{ - acpi_status status = AE_BAD_PARAMETER; - struct acpi_gpe_event_info *gpe_event_info; - acpi_cpu_flags flags; - - ACPI_FUNCTION_TRACE(acpi_disable_gpe); - - flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); - - /* Ensure that we have a valid GPE number */ - - gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); - if (gpe_event_info) { - status = acpi_raw_disable_gpe(gpe_event_info) ; - } - - acpi_os_release_lock(acpi_gbl_gpe_lock, flags); - return_ACPI_STATUS(status); -} -ACPI_EXPORT_SYMBOL(acpi_disable_gpe) - -/******************************************************************************* - * - * FUNCTION: acpi_gpe_can_wake - * - * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 - * gpe_number - GPE level within the GPE block - * - * RETURN: Status - * - * DESCRIPTION: Set the ACPI_GPE_CAN_WAKE flag for the given GPE. If the GPE - * has a corresponding method and is currently enabled, disable it - * (GPEs with corresponding methods are enabled unconditionally - * during initialization, but GPEs that can wake up are expected - * to be initially disabled). - * - ******************************************************************************/ -acpi_status acpi_gpe_can_wake(acpi_handle gpe_device, u32 gpe_number) -{ - acpi_status status = AE_OK; - struct acpi_gpe_event_info *gpe_event_info; - acpi_cpu_flags flags; - - ACPI_FUNCTION_TRACE(acpi_gpe_can_wake); - - flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); - - /* Ensure that we have a valid GPE number */ - - gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); - if (gpe_event_info) { - gpe_event_info->flags |= ACPI_GPE_CAN_WAKE; - } else { - status = AE_BAD_PARAMETER; - } - - acpi_os_release_lock(acpi_gbl_gpe_lock, flags); - return_ACPI_STATUS(status); -} -ACPI_EXPORT_SYMBOL(acpi_gpe_can_wake) - /******************************************************************************* * * FUNCTION: acpi_disable_event @@ -481,44 +295,6 @@ acpi_status acpi_clear_event(u32 event) ACPI_EXPORT_SYMBOL(acpi_clear_event) -/******************************************************************************* - * - * FUNCTION: acpi_clear_gpe - * - * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 - * gpe_number - GPE level within the GPE block - * - * RETURN: Status - * - * DESCRIPTION: Clear an ACPI event (general purpose) - * - ******************************************************************************/ -acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number) -{ - acpi_status status = AE_OK; - struct acpi_gpe_event_info *gpe_event_info; - acpi_cpu_flags flags; - - ACPI_FUNCTION_TRACE(acpi_clear_gpe); - - flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); - - /* Ensure that we have a valid GPE number */ - - gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); - if (!gpe_event_info) { - status = AE_BAD_PARAMETER; - goto unlock_and_exit; - } - - status = acpi_hw_clear_gpe(gpe_event_info); - - unlock_and_exit: - acpi_os_release_lock(acpi_gbl_gpe_lock, flags); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_clear_gpe) /******************************************************************************* * * FUNCTION: acpi_get_event_status @@ -575,379 +351,3 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status) } ACPI_EXPORT_SYMBOL(acpi_get_event_status) - -/******************************************************************************* - * - * FUNCTION: acpi_get_gpe_status - * - * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 - * gpe_number - GPE level within the GPE block - * event_status - Where the current status of the event will - * be returned - * - * RETURN: Status - * - * DESCRIPTION: Get status of an event (general purpose) - * - ******************************************************************************/ -acpi_status -acpi_get_gpe_status(acpi_handle gpe_device, - u32 gpe_number, acpi_event_status *event_status) -{ - acpi_status status = AE_OK; - struct acpi_gpe_event_info *gpe_event_info; - acpi_cpu_flags flags; - - ACPI_FUNCTION_TRACE(acpi_get_gpe_status); - - flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); - - /* Ensure that we have a valid GPE number */ - - gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); - if (!gpe_event_info) { - status = AE_BAD_PARAMETER; - goto unlock_and_exit; - } - - /* Obtain status on the requested GPE number */ - - status = acpi_hw_get_gpe_status(gpe_event_info, event_status); - - if (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) - *event_status |= ACPI_EVENT_FLAG_HANDLE; - - unlock_and_exit: - acpi_os_release_lock(acpi_gbl_gpe_lock, flags); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_get_gpe_status) -/******************************************************************************* - * - * FUNCTION: acpi_install_gpe_block - * - * PARAMETERS: gpe_device - Handle to the parent GPE Block Device - * gpe_block_address - Address and space_iD - * register_count - Number of GPE register pairs in the block - * interrupt_number - H/W interrupt for the block - * - * RETURN: Status - * - * DESCRIPTION: Create and Install a block of GPE registers - * - ******************************************************************************/ -acpi_status -acpi_install_gpe_block(acpi_handle gpe_device, - struct acpi_generic_address *gpe_block_address, - u32 register_count, u32 interrupt_number) -{ - acpi_status status = AE_OK; - union acpi_operand_object *obj_desc; - struct acpi_namespace_node *node; - struct acpi_gpe_block_info *gpe_block; - - ACPI_FUNCTION_TRACE(acpi_install_gpe_block); - - if ((!gpe_device) || (!gpe_block_address) || (!register_count)) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); - if (ACPI_FAILURE(status)) { - return (status); - } - - node = acpi_ns_validate_handle(gpe_device); - if (!node) { - status = AE_BAD_PARAMETER; - goto unlock_and_exit; - } - - /* - * For user-installed GPE Block Devices, the gpe_block_base_number - * is always zero - */ - status = - acpi_ev_create_gpe_block(node, gpe_block_address, register_count, 0, - interrupt_number, &gpe_block); - if (ACPI_FAILURE(status)) { - goto unlock_and_exit; - } - - /* Install block in the device_object attached to the node */ - - obj_desc = acpi_ns_get_attached_object(node); - if (!obj_desc) { - - /* - * No object, create a new one (Device nodes do not always have - * an attached object) - */ - obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_DEVICE); - if (!obj_desc) { - status = AE_NO_MEMORY; - goto unlock_and_exit; - } - - status = - acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_DEVICE); - - /* Remove local reference to the object */ - - acpi_ut_remove_reference(obj_desc); - - if (ACPI_FAILURE(status)) { - goto unlock_and_exit; - } - } - - /* Now install the GPE block in the device_object */ - - obj_desc->device.gpe_block = gpe_block; - - unlock_and_exit: - (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_install_gpe_block) - -/******************************************************************************* - * - * FUNCTION: acpi_remove_gpe_block - * - * PARAMETERS: gpe_device - Handle to the parent GPE Block Device - * - * RETURN: Status - * - * DESCRIPTION: Remove a previously installed block of GPE registers - * - ******************************************************************************/ -acpi_status acpi_remove_gpe_block(acpi_handle gpe_device) -{ - union acpi_operand_object *obj_desc; - acpi_status status; - struct acpi_namespace_node *node; - - ACPI_FUNCTION_TRACE(acpi_remove_gpe_block); - - if (!gpe_device) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); - if (ACPI_FAILURE(status)) { - return (status); - } - - node = acpi_ns_validate_handle(gpe_device); - if (!node) { - status = AE_BAD_PARAMETER; - goto unlock_and_exit; - } - - /* Get the device_object attached to the node */ - - obj_desc = acpi_ns_get_attached_object(node); - if (!obj_desc || !obj_desc->device.gpe_block) { - return_ACPI_STATUS(AE_NULL_OBJECT); - } - - /* Delete the GPE block (but not the device_object) */ - - status = acpi_ev_delete_gpe_block(obj_desc->device.gpe_block); - if (ACPI_SUCCESS(status)) { - obj_desc->device.gpe_block = NULL; - } - - unlock_and_exit: - (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); - return_ACPI_STATUS(status); -} - -ACPI_EXPORT_SYMBOL(acpi_remove_gpe_block) - -/******************************************************************************* - * - * FUNCTION: acpi_get_gpe_device - * - * PARAMETERS: Index - System GPE index (0-current_gpe_count) - * gpe_device - Where the parent GPE Device is returned - * - * RETURN: Status - * - * DESCRIPTION: Obtain the GPE device associated with the input index. A NULL - * gpe device indicates that the gpe number is contained in one of - * the FADT-defined gpe blocks. Otherwise, the GPE block device. - * - ******************************************************************************/ -acpi_status -acpi_get_gpe_device(u32 index, acpi_handle *gpe_device) -{ - struct acpi_gpe_device_info info; - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_get_gpe_device); - - if (!gpe_device) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - if (index >= acpi_current_gpe_count) { - return_ACPI_STATUS(AE_NOT_EXIST); - } - - /* Setup and walk the GPE list */ - - info.index = index; - info.status = AE_NOT_EXIST; - info.gpe_device = NULL; - info.next_block_base_index = 0; - - status = acpi_ev_walk_gpe_list(acpi_ev_get_gpe_device, &info); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - *gpe_device = info.gpe_device; - return_ACPI_STATUS(info.status); -} - -ACPI_EXPORT_SYMBOL(acpi_get_gpe_device) - -/******************************************************************************* - * - * FUNCTION: acpi_ev_get_gpe_device - * - * PARAMETERS: GPE_WALK_CALLBACK - * - * RETURN: Status - * - * DESCRIPTION: Matches the input GPE index (0-current_gpe_count) with a GPE - * block device. NULL if the GPE is one of the FADT-defined GPEs. - * - ******************************************************************************/ -static acpi_status -acpi_ev_get_gpe_device(struct acpi_gpe_xrupt_info *gpe_xrupt_info, - struct acpi_gpe_block_info *gpe_block, void *context) -{ - struct acpi_gpe_device_info *info = context; - - /* Increment Index by the number of GPEs in this block */ - - info->next_block_base_index += gpe_block->gpe_count; - - if (info->index < info->next_block_base_index) { - /* - * The GPE index is within this block, get the node. Leave the node - * NULL for the FADT-defined GPEs - */ - if ((gpe_block->node)->type == ACPI_TYPE_DEVICE) { - info->gpe_device = gpe_block->node; - } - - info->status = AE_OK; - return (AE_CTRL_END); - } - - return (AE_OK); -} - -/****************************************************************************** - * - * FUNCTION: acpi_disable_all_gpes - * - * PARAMETERS: None - * - * RETURN: Status - * - * DESCRIPTION: Disable and clear all GPEs in all GPE blocks - * - ******************************************************************************/ - -acpi_status acpi_disable_all_gpes(void) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_disable_all_gpes); - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - status = acpi_hw_disable_all_gpes(); - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - - return_ACPI_STATUS(status); -} - -/****************************************************************************** - * - * FUNCTION: acpi_enable_all_runtime_gpes - * - * PARAMETERS: None - * - * RETURN: Status - * - * DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks - * - ******************************************************************************/ - -acpi_status acpi_enable_all_runtime_gpes(void) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_enable_all_runtime_gpes); - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - status = acpi_hw_enable_all_runtime_gpes(); - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - - return_ACPI_STATUS(status); -} - -/****************************************************************************** - * - * FUNCTION: acpi_update_gpes - * - * PARAMETERS: None - * - * RETURN: None - * - * DESCRIPTION: Enable all GPEs that have associated _Lxx or _Exx methods and - * are not pointed to by any device _PRW methods indicating that - * these GPEs are generally intended for system or device wakeup - * (such GPEs have to be enabled directly when the devices whose - * _PRW methods point to them are set up for wakeup signaling). - * - ******************************************************************************/ - -acpi_status acpi_update_gpes(void) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(acpi_update_gpes); - - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } else if (acpi_all_gpes_initialized) { - goto unlock; - } - - status = acpi_ev_walk_gpe_list(acpi_ev_initialize_gpe_block, NULL); - if (ACPI_SUCCESS(status)) { - acpi_all_gpes_initialized = TRUE; - } - -unlock: - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - - return_ACPI_STATUS(status); -} diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c new file mode 100644 index 000000000000..8068065d90eb --- /dev/null +++ b/drivers/acpi/acpica/evxfgpe.c @@ -0,0 +1,610 @@ +/****************************************************************************** + * + * Module Name: evxfgpe - External Interfaces for General Purpose Events (GPEs) + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2010, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include "accommon.h" +#include "acevents.h" +#include "acnamesp.h" + +#define _COMPONENT ACPI_EVENTS +ACPI_MODULE_NAME("evxfgpe") + +/****************************************************************************** + * + * FUNCTION: acpi_update_gpes + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Enable all GPEs that have associated _Lxx or _Exx methods and + * are not pointed to by any device _PRW methods indicating that + * these GPEs are generally intended for system or device wakeup + * (such GPEs have to be enabled directly when the devices whose + * _PRW methods point to them are set up for wakeup signaling). + * + ******************************************************************************/ + +acpi_status acpi_update_gpes(void) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_update_gpes); + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } else if (acpi_all_gpes_initialized) { + goto unlock; + } + + status = acpi_ev_walk_gpe_list(acpi_ev_initialize_gpe_block, NULL); + if (ACPI_SUCCESS(status)) { + acpi_all_gpes_initialized = TRUE; + } + +unlock: + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_enable_gpe + * + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block + * + * RETURN: Status + * + * DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is + * hardware-enabled. + * + ******************************************************************************/ + +acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number) +{ + acpi_status status = AE_BAD_PARAMETER; + struct acpi_gpe_event_info *gpe_event_info; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(acpi_enable_gpe); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* Ensure that we have a valid GPE number */ + + gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); + if (gpe_event_info) { + status = acpi_raw_enable_gpe(gpe_event_info); + } + + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + return_ACPI_STATUS(status); +} +ACPI_EXPORT_SYMBOL(acpi_enable_gpe) + +/******************************************************************************* + * + * FUNCTION: acpi_disable_gpe + * + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block + * + * RETURN: Status + * + * DESCRIPTION: Remove a reference to a GPE. When the last reference is + * removed, only then is the GPE disabled (for runtime GPEs), or + * the GPE mask bit disabled (for wake GPEs) + * + ******************************************************************************/ + +acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number) +{ + acpi_status status = AE_BAD_PARAMETER; + struct acpi_gpe_event_info *gpe_event_info; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(acpi_disable_gpe); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* Ensure that we have a valid GPE number */ + + gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); + if (gpe_event_info) { + status = acpi_raw_disable_gpe(gpe_event_info) ; + } + + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + return_ACPI_STATUS(status); +} +ACPI_EXPORT_SYMBOL(acpi_disable_gpe) + +/******************************************************************************* + * + * FUNCTION: acpi_gpe_can_wake + * + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block + * + * RETURN: Status + * + * DESCRIPTION: Set the ACPI_GPE_CAN_WAKE flag for the given GPE. If the GPE + * has a corresponding method and is currently enabled, disable it + * (GPEs with corresponding methods are enabled unconditionally + * during initialization, but GPEs that can wake up are expected + * to be initially disabled). + * + ******************************************************************************/ +acpi_status acpi_gpe_can_wake(acpi_handle gpe_device, u32 gpe_number) +{ + acpi_status status = AE_OK; + struct acpi_gpe_event_info *gpe_event_info; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(acpi_gpe_can_wake); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* Ensure that we have a valid GPE number */ + + gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); + if (gpe_event_info) { + gpe_event_info->flags |= ACPI_GPE_CAN_WAKE; + } else { + status = AE_BAD_PARAMETER; + } + + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + return_ACPI_STATUS(status); +} +ACPI_EXPORT_SYMBOL(acpi_gpe_can_wake) + +/******************************************************************************* + * + * FUNCTION: acpi_gpe_wakeup + * + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block + * Action - Enable or Disable + * + * RETURN: Status + * + * DESCRIPTION: Set or clear the GPE's wakeup enable mask bit. + * + ******************************************************************************/ + +acpi_status acpi_gpe_wakeup(acpi_handle gpe_device, u32 gpe_number, u8 action) +{ + acpi_status status = AE_OK; + struct acpi_gpe_event_info *gpe_event_info; + struct acpi_gpe_register_info *gpe_register_info; + acpi_cpu_flags flags; + u32 register_bit; + + ACPI_FUNCTION_TRACE(acpi_gpe_wakeup); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* Ensure that we have a valid GPE number */ + + gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); + if (!gpe_event_info || !(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + gpe_register_info = gpe_event_info->register_info; + if (!gpe_register_info) { + status = AE_NOT_EXIST; + goto unlock_and_exit; + } + + register_bit = + acpi_hw_get_gpe_register_bit(gpe_event_info, gpe_register_info); + + /* Perform the action */ + + switch (action) { + case ACPI_GPE_ENABLE: + ACPI_SET_BIT(gpe_register_info->enable_for_wake, + (u8)register_bit); + break; + + case ACPI_GPE_DISABLE: + ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake, + (u8)register_bit); + break; + + default: + ACPI_ERROR((AE_INFO, "%u, Invalid action", action)); + status = AE_BAD_PARAMETER; + break; + } + +unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_gpe_wakeup) + +/******************************************************************************* + * + * FUNCTION: acpi_clear_gpe + * + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block + * + * RETURN: Status + * + * DESCRIPTION: Clear an ACPI event (general purpose) + * + ******************************************************************************/ +acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number) +{ + acpi_status status = AE_OK; + struct acpi_gpe_event_info *gpe_event_info; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(acpi_clear_gpe); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* Ensure that we have a valid GPE number */ + + gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); + if (!gpe_event_info) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + status = acpi_hw_clear_gpe(gpe_event_info); + + unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_clear_gpe) + +/******************************************************************************* + * + * FUNCTION: acpi_get_gpe_status + * + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block + * event_status - Where the current status of the event will + * be returned + * + * RETURN: Status + * + * DESCRIPTION: Get status of an event (general purpose) + * + ******************************************************************************/ +acpi_status +acpi_get_gpe_status(acpi_handle gpe_device, + u32 gpe_number, acpi_event_status *event_status) +{ + acpi_status status = AE_OK; + struct acpi_gpe_event_info *gpe_event_info; + acpi_cpu_flags flags; + + ACPI_FUNCTION_TRACE(acpi_get_gpe_status); + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + /* Ensure that we have a valid GPE number */ + + gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); + if (!gpe_event_info) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + /* Obtain status on the requested GPE number */ + + status = acpi_hw_get_gpe_status(gpe_event_info, event_status); + + if (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) + *event_status |= ACPI_EVENT_FLAG_HANDLE; + + unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_get_gpe_status) + +/****************************************************************************** + * + * FUNCTION: acpi_disable_all_gpes + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Disable and clear all GPEs in all GPE blocks + * + ******************************************************************************/ + +acpi_status acpi_disable_all_gpes(void) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_disable_all_gpes); + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_hw_disable_all_gpes(); + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + + return_ACPI_STATUS(status); +} + +/****************************************************************************** + * + * FUNCTION: acpi_enable_all_runtime_gpes + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks + * + ******************************************************************************/ + +acpi_status acpi_enable_all_runtime_gpes(void) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_enable_all_runtime_gpes); + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_hw_enable_all_runtime_gpes(); + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_install_gpe_block + * + * PARAMETERS: gpe_device - Handle to the parent GPE Block Device + * gpe_block_address - Address and space_iD + * register_count - Number of GPE register pairs in the block + * interrupt_number - H/W interrupt for the block + * + * RETURN: Status + * + * DESCRIPTION: Create and Install a block of GPE registers + * + ******************************************************************************/ +acpi_status +acpi_install_gpe_block(acpi_handle gpe_device, + struct acpi_generic_address *gpe_block_address, + u32 register_count, u32 interrupt_number) +{ + acpi_status status = AE_OK; + union acpi_operand_object *obj_desc; + struct acpi_namespace_node *node; + struct acpi_gpe_block_info *gpe_block; + + ACPI_FUNCTION_TRACE(acpi_install_gpe_block); + + if ((!gpe_device) || (!gpe_block_address) || (!register_count)) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return (status); + } + + node = acpi_ns_validate_handle(gpe_device); + if (!node) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + /* + * For user-installed GPE Block Devices, the gpe_block_base_number + * is always zero + */ + status = + acpi_ev_create_gpe_block(node, gpe_block_address, register_count, 0, + interrupt_number, &gpe_block); + if (ACPI_FAILURE(status)) { + goto unlock_and_exit; + } + + /* Install block in the device_object attached to the node */ + + obj_desc = acpi_ns_get_attached_object(node); + if (!obj_desc) { + + /* + * No object, create a new one (Device nodes do not always have + * an attached object) + */ + obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_DEVICE); + if (!obj_desc) { + status = AE_NO_MEMORY; + goto unlock_and_exit; + } + + status = + acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_DEVICE); + + /* Remove local reference to the object */ + + acpi_ut_remove_reference(obj_desc); + + if (ACPI_FAILURE(status)) { + goto unlock_and_exit; + } + } + + /* Now install the GPE block in the device_object */ + + obj_desc->device.gpe_block = gpe_block; + + unlock_and_exit: + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_gpe_block) + +/******************************************************************************* + * + * FUNCTION: acpi_remove_gpe_block + * + * PARAMETERS: gpe_device - Handle to the parent GPE Block Device + * + * RETURN: Status + * + * DESCRIPTION: Remove a previously installed block of GPE registers + * + ******************************************************************************/ +acpi_status acpi_remove_gpe_block(acpi_handle gpe_device) +{ + union acpi_operand_object *obj_desc; + acpi_status status; + struct acpi_namespace_node *node; + + ACPI_FUNCTION_TRACE(acpi_remove_gpe_block); + + if (!gpe_device) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return (status); + } + + node = acpi_ns_validate_handle(gpe_device); + if (!node) { + status = AE_BAD_PARAMETER; + goto unlock_and_exit; + } + + /* Get the device_object attached to the node */ + + obj_desc = acpi_ns_get_attached_object(node); + if (!obj_desc || !obj_desc->device.gpe_block) { + return_ACPI_STATUS(AE_NULL_OBJECT); + } + + /* Delete the GPE block (but not the device_object) */ + + status = acpi_ev_delete_gpe_block(obj_desc->device.gpe_block); + if (ACPI_SUCCESS(status)) { + obj_desc->device.gpe_block = NULL; + } + + unlock_and_exit: + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_remove_gpe_block) + +/******************************************************************************* + * + * FUNCTION: acpi_get_gpe_device + * + * PARAMETERS: Index - System GPE index (0-current_gpe_count) + * gpe_device - Where the parent GPE Device is returned + * + * RETURN: Status + * + * DESCRIPTION: Obtain the GPE device associated with the input index. A NULL + * gpe device indicates that the gpe number is contained in one of + * the FADT-defined gpe blocks. Otherwise, the GPE block device. + * + ******************************************************************************/ +acpi_status +acpi_get_gpe_device(u32 index, acpi_handle *gpe_device) +{ + struct acpi_gpe_device_info info; + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_get_gpe_device); + + if (!gpe_device) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + if (index >= acpi_current_gpe_count) { + return_ACPI_STATUS(AE_NOT_EXIST); + } + + /* Setup and walk the GPE list */ + + info.index = index; + info.status = AE_NOT_EXIST; + info.gpe_device = NULL; + info.next_block_base_index = 0; + + status = acpi_ev_walk_gpe_list(acpi_ev_get_gpe_device, &info); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + *gpe_device = info.gpe_device; + return_ACPI_STATUS(info.status); +} + +ACPI_EXPORT_SYMBOL(acpi_get_gpe_device) -- cgit v1.2.1 From 3a37898d507794cfc68a092303e02651d3f01308 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Mon, 13 Dec 2010 13:36:15 +0800 Subject: ACPICA: Rename some function and variable names Some function and variable names are renamed to be consistent with ACPICA code base. acpi_raw_enable_gpe -> acpi_ev_add_gpe_reference acpi_raw_disable_gpe -> acpi_ev_remove_gpe_reference acpi_gpe_can_wake -> acpi_setup_gpe_for_wake acpi_gpe_wakeup -> acpi_set_gpe_wake_mask acpi_update_gpes -> acpi_update_all_gpes acpi_all_gpes_initialized -> acpi_gbl_all_gpes_initialized acpi_handler_info -> acpi_gpe_handler_info ... Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/acevents.h | 6 ++--- drivers/acpi/acpica/acglobal.h | 2 +- drivers/acpi/acpica/aclocal.h | 8 +++---- drivers/acpi/acpica/evgpe.c | 14 +++++++---- drivers/acpi/acpica/evgpeblk.c | 4 ++-- drivers/acpi/acpica/evxface.c | 16 ++++++------- drivers/acpi/acpica/evxfgpe.c | 53 ++++++++++++++++++++++++++---------------- drivers/acpi/acpica/hwgpe.c | 2 +- drivers/acpi/acpica/utglobal.c | 2 +- drivers/acpi/dock.c | 2 +- drivers/acpi/scan.c | 6 ++--- drivers/acpi/wakeup.c | 4 ++-- 12 files changed, 68 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index 43f15c8cd2b2..ce2af07f62b3 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -82,9 +82,9 @@ acpi_ev_update_gpe_enable_mask(struct acpi_gpe_event_info *gpe_event_info); acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info); -acpi_status acpi_raw_enable_gpe(struct acpi_gpe_event_info *gpe_event_info); +acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info); -acpi_status acpi_raw_disable_gpe(struct acpi_gpe_event_info *gpe_event_info); +acpi_status acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info); struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device, u32 gpe_number); @@ -107,7 +107,7 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, acpi_status acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, struct acpi_gpe_block_info *gpe_block, - void *ignored); + void *context); acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block); diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index ad88fcae4eb9..fc694647699f 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -370,7 +370,7 @@ ACPI_EXTERN struct acpi_fixed_event_handler ACPI_EXTERN struct acpi_gpe_xrupt_info *acpi_gbl_gpe_xrupt_list_head; ACPI_EXTERN struct acpi_gpe_block_info *acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS]; -ACPI_EXTERN u8 acpi_all_gpes_initialized; +ACPI_EXTERN u8 acpi_gbl_all_gpes_initialized; /***************************************************************************** * diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 2ceb0c05b2d7..2f841d019a3a 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -412,13 +412,13 @@ struct acpi_handler_info { acpi_event_handler address; /* Address of handler, if any */ void *context; /* Context to be passed to handler */ struct acpi_namespace_node *method_node; /* Method node for this GPE level (saved) */ - u8 orig_flags; /* Original misc info about this GPE */ - u8 orig_enabled; /* Set if the GPE was originally enabled */ + u8 original_flags; /* Original (pre-handler) GPE info */ + u8 originally_enabled; /* True if GPE was originally enabled */ }; union acpi_gpe_dispatch_info { struct acpi_namespace_node *method_node; /* Method node for this GPE level */ - struct acpi_handler_info *handler; + struct acpi_handler_info *handler; /* Installed GPE handler */ }; /* @@ -458,7 +458,7 @@ struct acpi_gpe_block_info { u32 register_count; /* Number of register pairs in block */ u16 gpe_count; /* Number of individual GPEs in block */ u8 block_base_number; /* Base GPE number for this block */ - u8 initialized; /* If set, the GPE block has been initialized */ + u8 initialized; /* TRUE if this block is initialized */ }; /* Information about GPE interrupt handlers, one per each interrupt level used for GPEs */ diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index f226eac314db..005c170d2448 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -137,7 +137,7 @@ acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) /******************************************************************************* * - * FUNCTION: acpi_raw_enable_gpe + * FUNCTION: acpi_ev_add_gpe_reference * * PARAMETERS: gpe_event_info - GPE to enable * @@ -148,10 +148,12 @@ acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) * ******************************************************************************/ -acpi_status acpi_raw_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) +acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info) { acpi_status status = AE_OK; + ACPI_FUNCTION_TRACE(ev_add_gpe_reference); + if (gpe_event_info->runtime_count == ACPI_UINT8_MAX) { return_ACPI_STATUS(AE_LIMIT); } @@ -173,7 +175,7 @@ acpi_status acpi_raw_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) /******************************************************************************* * - * FUNCTION: acpi_raw_disable_gpe + * FUNCTION: acpi_ev_remove_gpe_reference * * PARAMETERS: gpe_event_info - GPE to disable * @@ -184,10 +186,12 @@ acpi_status acpi_raw_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) * ******************************************************************************/ -acpi_status acpi_raw_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) +acpi_status acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info) { acpi_status status = AE_OK; + ACPI_FUNCTION_TRACE(ev_remove_gpe_reference); + if (!gpe_event_info->runtime_count) { return_ACPI_STATUS(AE_LIMIT); } @@ -529,7 +533,7 @@ static void acpi_ev_asynch_enable_gpe(void *context) * Enable this GPE, conditionally. This means that the GPE will only be * physically enabled if the enable_for_run bit is set in the event_info */ - (void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_COND_ENABLE); + (void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_CONDITIONAL_ENABLE); return_VOID; } diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index 020add3eee1c..2a445dfcfdb4 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -386,7 +386,7 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, return_ACPI_STATUS(status); } - acpi_all_gpes_initialized = FALSE; + acpi_gbl_all_gpes_initialized = FALSE; /* Find all GPE methods (_Lxx or_Exx) for this block */ @@ -479,7 +479,7 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, continue; } - status = acpi_raw_enable_gpe(gpe_event_info); + status = acpi_ev_add_gpe_reference(gpe_event_info); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Could not enable GPE 0x%02X", diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c index 36af222cac65..042a6d69f38e 100644 --- a/drivers/acpi/acpica/evxface.c +++ b/drivers/acpi/acpica/evxface.c @@ -722,7 +722,7 @@ acpi_install_gpe_handler(acpi_handle gpe_device, handler->address = address; handler->context = context; handler->method_node = gpe_event_info->dispatch.method_node; - handler->orig_flags = gpe_event_info->flags & + handler->original_flags = gpe_event_info->flags & (ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK); /* @@ -731,10 +731,10 @@ acpi_install_gpe_handler(acpi_handle gpe_device, * disabled now to avoid spurious execution of the handler. */ - if ((handler->orig_flags & ACPI_GPE_DISPATCH_METHOD) + if ((handler->original_flags & ACPI_GPE_DISPATCH_METHOD) && gpe_event_info->runtime_count) { - handler->orig_enabled = 1; - (void)acpi_raw_disable_gpe(gpe_event_info); + handler->originally_enabled = 1; + (void)acpi_ev_remove_gpe_reference(gpe_event_info); } /* Install the handler */ @@ -835,7 +835,7 @@ acpi_remove_gpe_handler(acpi_handle gpe_device, gpe_event_info->dispatch.method_node = handler->method_node; gpe_event_info->flags &= ~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK); - gpe_event_info->flags |= handler->orig_flags; + gpe_event_info->flags |= handler->original_flags; /* * If the GPE was previously associated with a method and it was @@ -843,9 +843,9 @@ acpi_remove_gpe_handler(acpi_handle gpe_device, * post-initialization configuration. */ - if ((handler->orig_flags & ACPI_GPE_DISPATCH_METHOD) - && handler->orig_enabled) - (void)acpi_raw_enable_gpe(gpe_event_info); + if ((handler->original_flags & ACPI_GPE_DISPATCH_METHOD) + && handler->originally_enabled) + (void)acpi_ev_add_gpe_reference(gpe_event_info); /* Now we can free the handler object */ diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c index 8068065d90eb..99f77ab29729 100644 --- a/drivers/acpi/acpica/evxfgpe.c +++ b/drivers/acpi/acpica/evxfgpe.c @@ -51,7 +51,7 @@ ACPI_MODULE_NAME("evxfgpe") /****************************************************************************** * - * FUNCTION: acpi_update_gpes + * FUNCTION: acpi_update_all_gpes * * PARAMETERS: None * @@ -65,30 +65,34 @@ ACPI_MODULE_NAME("evxfgpe") * ******************************************************************************/ -acpi_status acpi_update_gpes(void) +acpi_status acpi_update_all_gpes(void) { acpi_status status; - ACPI_FUNCTION_TRACE(acpi_update_gpes); + ACPI_FUNCTION_TRACE(acpi_update_all_gpes); status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); - } else if (acpi_all_gpes_initialized) { - goto unlock; + } + + if (acpi_gbl_all_gpes_initialized) { + goto unlock_and_exit; } status = acpi_ev_walk_gpe_list(acpi_ev_initialize_gpe_block, NULL); if (ACPI_SUCCESS(status)) { - acpi_all_gpes_initialized = TRUE; + acpi_gbl_all_gpes_initialized = TRUE; } -unlock: +unlock_and_exit: (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); return_ACPI_STATUS(status); } +ACPI_EXPORT_SYMBOL(acpi_update_all_gpes) + /******************************************************************************* * * FUNCTION: acpi_enable_gpe @@ -117,7 +121,7 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number) gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); if (gpe_event_info) { - status = acpi_raw_enable_gpe(gpe_event_info); + status = acpi_ev_add_gpe_reference(gpe_event_info); } acpi_os_release_lock(acpi_gbl_gpe_lock, flags); @@ -154,7 +158,7 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number) gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); if (gpe_event_info) { - status = acpi_raw_disable_gpe(gpe_event_info) ; + status = acpi_ev_remove_gpe_reference(gpe_event_info) ; } acpi_os_release_lock(acpi_gbl_gpe_lock, flags); @@ -164,7 +168,7 @@ ACPI_EXPORT_SYMBOL(acpi_disable_gpe) /******************************************************************************* * - * FUNCTION: acpi_gpe_can_wake + * FUNCTION: acpi_setup_gpe_for_wake * * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 * gpe_number - GPE level within the GPE block @@ -178,13 +182,13 @@ ACPI_EXPORT_SYMBOL(acpi_disable_gpe) * to be initially disabled). * ******************************************************************************/ -acpi_status acpi_gpe_can_wake(acpi_handle gpe_device, u32 gpe_number) +acpi_status acpi_setup_gpe_for_wake(acpi_handle gpe_device, u32 gpe_number) { acpi_status status = AE_OK; struct acpi_gpe_event_info *gpe_event_info; acpi_cpu_flags flags; - ACPI_FUNCTION_TRACE(acpi_gpe_can_wake); + ACPI_FUNCTION_TRACE(acpi_setup_gpe_for_wake); flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); @@ -200,11 +204,11 @@ acpi_status acpi_gpe_can_wake(acpi_handle gpe_device, u32 gpe_number) acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } -ACPI_EXPORT_SYMBOL(acpi_gpe_can_wake) +ACPI_EXPORT_SYMBOL(acpi_setup_gpe_for_wake) /******************************************************************************* * - * FUNCTION: acpi_gpe_wakeup + * FUNCTION: acpi_set_gpe_wake_mask * * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 * gpe_number - GPE level within the GPE block @@ -216,7 +220,7 @@ ACPI_EXPORT_SYMBOL(acpi_gpe_can_wake) * ******************************************************************************/ -acpi_status acpi_gpe_wakeup(acpi_handle gpe_device, u32 gpe_number, u8 action) +acpi_status acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action) { acpi_status status = AE_OK; struct acpi_gpe_event_info *gpe_event_info; @@ -224,18 +228,23 @@ acpi_status acpi_gpe_wakeup(acpi_handle gpe_device, u32 gpe_number, u8 action) acpi_cpu_flags flags; u32 register_bit; - ACPI_FUNCTION_TRACE(acpi_gpe_wakeup); + ACPI_FUNCTION_TRACE(acpi_set_gpe_wake_mask); flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); - if (!gpe_event_info || !(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) { + if (!gpe_event_info) { status = AE_BAD_PARAMETER; goto unlock_and_exit; } + if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) { + status = AE_TYPE; + goto unlock_and_exit; + } + gpe_register_info = gpe_event_info->register_info; if (!gpe_register_info) { status = AE_NOT_EXIST; @@ -269,7 +278,7 @@ unlock_and_exit: return_ACPI_STATUS(status); } -ACPI_EXPORT_SYMBOL(acpi_gpe_wakeup) +ACPI_EXPORT_SYMBOL(acpi_set_gpe_wake_mask) /******************************************************************************* * @@ -387,6 +396,8 @@ acpi_status acpi_disable_all_gpes(void) return_ACPI_STATUS(status); } +ACPI_EXPORT_SYMBOL(acpi_disable_all_gpes) + /****************************************************************************** * * FUNCTION: acpi_enable_all_runtime_gpes @@ -416,6 +427,8 @@ acpi_status acpi_enable_all_runtime_gpes(void) return_ACPI_STATUS(status); } +ACPI_EXPORT_SYMBOL(acpi_enable_all_runtime_gpes) + /******************************************************************************* * * FUNCTION: acpi_install_gpe_block @@ -435,7 +448,7 @@ acpi_install_gpe_block(acpi_handle gpe_device, struct acpi_generic_address *gpe_block_address, u32 register_count, u32 interrupt_number) { - acpi_status status = AE_OK; + acpi_status status; union acpi_operand_object *obj_desc; struct acpi_namespace_node *node; struct acpi_gpe_block_info *gpe_block; @@ -603,7 +616,7 @@ acpi_get_gpe_device(u32 index, acpi_handle *gpe_device) return_ACPI_STATUS(status); } - *gpe_device = info.gpe_device; + *gpe_device = ACPI_CAST_PTR(acpi_handle, info.gpe_device); return_ACPI_STATUS(info.status); } diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index 14750db2a1b8..7c6d4858bb49 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -118,7 +118,7 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action) register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info, gpe_register_info); switch (action) { - case ACPI_GPE_COND_ENABLE: + case ACPI_GPE_CONDITIONAL_ENABLE: if (!(register_bit & gpe_register_info->enable_for_run)) return (AE_BAD_PARAMETER); diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c index e87bc6760be6..a99c32aa48a4 100644 --- a/drivers/acpi/acpica/utglobal.c +++ b/drivers/acpi/acpica/utglobal.c @@ -768,7 +768,7 @@ acpi_status acpi_ut_init_globals(void) acpi_gbl_gpe_fadt_blocks[0] = NULL; acpi_gbl_gpe_fadt_blocks[1] = NULL; acpi_current_gpe_count = 0; - acpi_all_gpes_initialized = FALSE; + acpi_gbl_all_gpes_initialized = FALSE; /* Global handlers */ diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 81514a4918cc..1864ad3cf895 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -725,7 +725,7 @@ static void dock_notify(acpi_handle handle, u32 event, void *data) complete_dock(ds); dock_event(ds, event, DOCK_EVENT); dock_lock(ds, 1); - acpi_update_gpes(); + acpi_update_all_gpes(); break; } if (dock_present(ds) || dock_in_progress(ds)) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 29ef505c487b..70249b3d2934 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -778,7 +778,7 @@ acpi_bus_extract_wakeup_device_power_package(acpi_handle handle, wakeup->resources.handles[i] = element->reference.handle; } - acpi_gpe_can_wake(wakeup->gpe_device, wakeup->gpe_number); + acpi_setup_gpe_for_wake(wakeup->gpe_device, wakeup->gpe_number); out: kfree(buffer.pointer); @@ -1467,7 +1467,7 @@ int acpi_bus_start(struct acpi_device *device) result = acpi_bus_scan(device->handle, &ops, NULL); - acpi_update_gpes(); + acpi_update_all_gpes(); return result; } @@ -1584,7 +1584,7 @@ int __init acpi_scan_init(void) if (result) acpi_device_unregister(acpi_root, ACPI_BUS_REMOVAL_NORMAL); else - acpi_update_gpes(); + acpi_update_all_gpes(); return result; } diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c index f62a50c3ed34..c6cb68e0a80c 100644 --- a/drivers/acpi/wakeup.c +++ b/drivers/acpi/wakeup.c @@ -45,7 +45,7 @@ void acpi_enable_wakeup_devices(u8 sleep_state) acpi_enable_wakeup_device_power(dev, sleep_state); /* The wake-up power should have been enabled already. */ - acpi_gpe_wakeup(dev->wakeup.gpe_device, dev->wakeup.gpe_number, + acpi_set_gpe_wake_mask(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_GPE_ENABLE); } } @@ -67,7 +67,7 @@ void acpi_disable_wakeup_devices(u8 sleep_state) || (sleep_state > (u32) dev->wakeup.sleep_state)) continue; - acpi_gpe_wakeup(dev->wakeup.gpe_device, dev->wakeup.gpe_number, + acpi_set_gpe_wake_mask(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_GPE_DISABLE); if (dev->wakeup.state.enabled) -- cgit v1.2.1 From 8b6cd8ad18def34bfc5045b2a0234329bf94cf78 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Mon, 13 Dec 2010 13:38:46 +0800 Subject: ACPICA: New GPE handler callback definition The new GPE handler callback has 2 additional parameters, gpe_device and gpe_number. typedef u32 (*acpi_gpe_handler) (acpi_handle gpe_device, u32 gpe_number, void *context); Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/acevents.h | 3 ++- drivers/acpi/acpica/aclocal.h | 6 +++--- drivers/acpi/acpica/evgpe.c | 14 ++++++++++---- drivers/acpi/acpica/evxface.c | 10 +++++----- drivers/acpi/ec.c | 3 ++- drivers/char/ipmi/ipmi_si_intf.c | 3 ++- 6 files changed, 24 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index ce2af07f62b3..ebb467fe3678 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -112,7 +112,8 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block); u32 -acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, +acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, + struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number); /* diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 2f841d019a3a..6a71f8e673e9 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -408,8 +408,8 @@ struct acpi_predefined_data { /* Dispatch info for each GPE -- either a method or handler, cannot be both */ -struct acpi_handler_info { - acpi_event_handler address; /* Address of handler, if any */ +struct acpi_gpe_handler_info { + acpi_gpe_handler address; /* Address of handler, if any */ void *context; /* Context to be passed to handler */ struct acpi_namespace_node *method_node; /* Method node for this GPE level (saved) */ u8 original_flags; /* Original (pre-handler) GPE info */ @@ -418,7 +418,7 @@ struct acpi_handler_info { union acpi_gpe_dispatch_info { struct acpi_namespace_node *method_node; /* Method node for this GPE level */ - struct acpi_handler_info *handler; /* Installed GPE handler */ + struct acpi_gpe_handler_info *handler; /* Installed GPE handler */ }; /* diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index 005c170d2448..3fb621eec2fa 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -409,7 +409,9 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list) * or method. */ int_status |= - acpi_ev_gpe_dispatch(&gpe_block-> + acpi_ev_gpe_dispatch(gpe_block-> + node, + &gpe_block-> event_info[((acpi_size) i * ACPI_GPE_REGISTER_WIDTH) + j], j + gpe_register_info->base_gpe_number); } } @@ -542,7 +544,8 @@ static void acpi_ev_asynch_enable_gpe(void *context) * * FUNCTION: acpi_ev_gpe_dispatch * - * PARAMETERS: gpe_event_info - Info for this GPE + * PARAMETERS: gpe_device - Device node. NULL for GPE0/GPE1 + * gpe_event_info - Info for this GPE * gpe_number - Number relative to the parent GPE block * * RETURN: INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED @@ -555,7 +558,8 @@ static void acpi_ev_asynch_enable_gpe(void *context) ******************************************************************************/ u32 -acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) +acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, + struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) { acpi_status status; @@ -593,7 +597,9 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) * Ignore return status for now. * TBD: leave GPE disabled on error? */ - (void)gpe_event_info->dispatch.handler->address(gpe_event_info-> + (void)gpe_event_info->dispatch.handler->address(gpe_device, + gpe_number, + gpe_event_info-> dispatch. handler-> context); diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c index 042a6d69f38e..d193b905dfa2 100644 --- a/drivers/acpi/acpica/evxface.c +++ b/drivers/acpi/acpica/evxface.c @@ -671,10 +671,10 @@ ACPI_EXPORT_SYMBOL(acpi_remove_notify_handler) acpi_status acpi_install_gpe_handler(acpi_handle gpe_device, u32 gpe_number, - u32 type, acpi_event_handler address, void *context) + u32 type, acpi_gpe_handler address, void *context) { struct acpi_gpe_event_info *gpe_event_info; - struct acpi_handler_info *handler; + struct acpi_gpe_handler_info *handler; acpi_status status; acpi_cpu_flags flags; @@ -693,7 +693,7 @@ acpi_install_gpe_handler(acpi_handle gpe_device, /* Allocate memory for the handler object */ - handler = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_handler_info)); + handler = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_handler_info)); if (!handler) { status = AE_NO_MEMORY; goto unlock_and_exit; @@ -777,10 +777,10 @@ ACPI_EXPORT_SYMBOL(acpi_install_gpe_handler) ******************************************************************************/ acpi_status acpi_remove_gpe_handler(acpi_handle gpe_device, - u32 gpe_number, acpi_event_handler address) + u32 gpe_number, acpi_gpe_handler address) { struct acpi_gpe_event_info *gpe_event_info; - struct acpi_handler_info *handler; + struct acpi_gpe_handler_info *handler; acpi_status status; acpi_cpu_flags flags; diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 302b31ed31f1..81887724de80 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -606,7 +606,8 @@ static int ec_check_sci(struct acpi_ec *ec, u8 state) return 0; } -static u32 acpi_ec_gpe_handler(void *data) +static u32 acpi_ec_gpe_handler(acpi_handle gpe_device, + u32 gpe_number, void *data) { struct acpi_ec *ec = data; diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 035da9e64a17..c4bacc6ec450 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -1928,7 +1928,8 @@ static void __devinit hardcode_find_bmc(void) static int acpi_failure; /* For GPE-type interrupts. */ -static u32 ipmi_acpi_gpe(void *context) +static u32 ipmi_acpi_gpe(acpi_handle gpe_device, + u32 gpe_number, void *context) { struct smi_info *smi_info = context; unsigned long flags; -- cgit v1.2.1 From 84f6b2a681cd2cc55ecc3fa94bfbe672d7ef4126 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Mon, 13 Dec 2010 13:38:55 +0800 Subject: ACPICA: Remove unused function declarations Acked-by: Rafael J. Wysocki Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/acevents.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index ebb467fe3678..04a83fe47d6f 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -51,8 +51,6 @@ acpi_status acpi_ev_initialize_events(void); acpi_status acpi_ev_install_xrupt_handlers(void); -acpi_status acpi_ev_install_fadt_gpes(void); - u32 acpi_ev_fixed_event_detect(void); /* @@ -127,10 +125,6 @@ acpi_status acpi_ev_match_gpe_method(acpi_handle obj_handle, u32 level, void *context, void **return_value); -acpi_status -acpi_ev_match_prw_and_gpe(acpi_handle obj_handle, - u32 level, void *context, void **return_value); - /* * evgpeutil - GPE utilities */ -- cgit v1.2.1 From 5a284cd75d635e3c5db0210dc9a9a44c6839f460 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Mon, 13 Dec 2010 13:39:07 +0800 Subject: ACPICA: Fix local variable mess in acpi_ev_asynch_execute_gpe_method Change the local variable in acpi_ev_asynch_execute_gpe_method() back into a pointer as ACPICA code base does. Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/evgpe.c | 57 +++++++++++++++++++++++++++++++++++---------- 1 file changed, 45 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index 3fb621eec2fa..c25999546c8c 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -52,6 +52,8 @@ ACPI_MODULE_NAME("evgpe") /* Local prototypes */ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context); +static void ACPI_SYSTEM_XFACE acpi_ev_asynch_enable_gpe(void *context); + /******************************************************************************* * * FUNCTION: acpi_ev_update_gpe_enable_mask @@ -441,17 +443,25 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list) * an interrupt handler. * ******************************************************************************/ -static void acpi_ev_asynch_enable_gpe(void *context); static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) { - struct acpi_gpe_event_info *gpe_event_info = (void *)context; + struct acpi_gpe_event_info *gpe_event_info = context; acpi_status status; - struct acpi_gpe_event_info local_gpe_event_info; + struct acpi_gpe_event_info *local_gpe_event_info; struct acpi_evaluate_info *info; ACPI_FUNCTION_TRACE(ev_asynch_execute_gpe_method); + /* Allocate a local GPE block */ + + local_gpe_event_info = + ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_event_info)); + if (!local_gpe_event_info) { + ACPI_EXCEPTION((AE_INFO, AE_NO_MEMORY, "while handling a GPE")); + return_VOID; + } + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); if (ACPI_FAILURE(status)) { return_VOID; @@ -468,7 +478,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) * Take a snapshot of the GPE info for this level - we copy the info to * prevent a race condition with remove_handler/remove_block. */ - ACPI_MEMCPY(&local_gpe_event_info, gpe_event_info, + ACPI_MEMCPY(local_gpe_event_info, gpe_event_info, sizeof(struct acpi_gpe_event_info)); status = acpi_ut_release_mutex(ACPI_MTX_EVENTS); @@ -480,7 +490,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) * Must check for control method type dispatch one more time to avoid a * race with ev_gpe_install_handler */ - if ((local_gpe_event_info.flags & ACPI_GPE_DISPATCH_MASK) == + if ((local_gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == ACPI_GPE_DISPATCH_METHOD) { /* Allocate the evaluation information block */ @@ -494,7 +504,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) * control method that corresponds to this GPE */ info->prefix_node = - local_gpe_event_info.dispatch.method_node; + local_gpe_event_info->dispatch.method_node; info->flags = ACPI_IGNORE_RETURN_VALUE; status = acpi_ns_evaluate(info); @@ -505,20 +515,41 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) ACPI_EXCEPTION((AE_INFO, status, "while evaluating GPE method [%4.4s]", acpi_ut_get_node_name - (local_gpe_event_info.dispatch. + (local_gpe_event_info->dispatch. method_node))); } } + /* Defer enabling of GPE until all notify handlers are done */ - acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_ev_asynch_enable_gpe, - gpe_event_info); + + status = acpi_os_execute(OSL_NOTIFY_HANDLER, + acpi_ev_asynch_enable_gpe, + local_gpe_event_info); + if (ACPI_FAILURE(status)) { + ACPI_FREE(local_gpe_event_info); + } return_VOID; } -static void acpi_ev_asynch_enable_gpe(void *context) +/******************************************************************************* + * + * FUNCTION: acpi_ev_asynch_enable_gpe + * + * PARAMETERS: Context (gpe_event_info) - Info for this GPE + * Callback from acpi_os_execute + * + * RETURN: None + * + * DESCRIPTION: Asynchronous clear/enable for GPE. This allows the GPE to + * complete. + * + ******************************************************************************/ + +static void ACPI_SYSTEM_XFACE acpi_ev_asynch_enable_gpe(void *context) { struct acpi_gpe_event_info *gpe_event_info = context; acpi_status status; + if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) == ACPI_GPE_LEVEL_TRIGGERED) { /* @@ -527,7 +558,7 @@ static void acpi_ev_asynch_enable_gpe(void *context) */ status = acpi_hw_clear_gpe(gpe_event_info); if (ACPI_FAILURE(status)) { - return_VOID; + goto exit; } } @@ -537,7 +568,9 @@ static void acpi_ev_asynch_enable_gpe(void *context) */ (void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_CONDITIONAL_ENABLE); - return_VOID; +exit: + ACPI_FREE(gpe_event_info); + return; } /******************************************************************************* -- cgit v1.2.1 From bba63a296ffab20e08d9e8252d2f0d99050ac859 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Mon, 13 Dec 2010 13:39:17 +0800 Subject: ACPICA: Implicit notify support This feature provides an automatic device notification for wake devices when a wakeup GPE occurs and there is no corresponding GPE method or handler. Rather than ignoring such a GPE, an implicit AML Notify operation is performed on the parent device object. This feature is not part of the ACPI specification and is provided for Windows compatibility only. Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/acevents.h | 2 + drivers/acpi/acpica/aclocal.h | 1 + drivers/acpi/acpica/evgpe.c | 172 +++++++++++++++++++++++----------------- drivers/acpi/acpica/evgpeblk.c | 11 ++- drivers/acpi/acpica/evgpeinit.c | 1 + drivers/acpi/acpica/evxfgpe.c | 58 +++++++++++--- drivers/acpi/ec.c | 2 +- drivers/acpi/scan.c | 2 +- 8 files changed, 161 insertions(+), 88 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index 04a83fe47d6f..70e0b28801aa 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -91,6 +91,8 @@ struct acpi_gpe_event_info *acpi_ev_low_get_gpe_info(u32 gpe_number, struct acpi_gpe_block_info *gpe_block); +acpi_status acpi_ev_finish_gpe(struct acpi_gpe_event_info *gpe_event_info); + /* * evgpeblk - Upper-level GPE block support */ diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 6a71f8e673e9..74000f5b7dab 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -419,6 +419,7 @@ struct acpi_gpe_handler_info { union acpi_gpe_dispatch_info { struct acpi_namespace_node *method_node; /* Method node for this GPE level */ struct acpi_gpe_handler_info *handler; /* Installed GPE handler */ + struct acpi_namespace_node *device_node; /* Parent _PRW device for implicit notify */ }; /* diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index c25999546c8c..2dbca95979ce 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -115,12 +115,13 @@ acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) ACPI_FUNCTION_TRACE(ev_enable_gpe); /* - * We will only allow a GPE to be enabled if it has either an - * associated method (_Lxx/_Exx) or a handler. Otherwise, the - * GPE will be immediately disabled by acpi_ev_gpe_dispatch the - * first time it fires. + * We will only allow a GPE to be enabled if it has either an associated + * method (_Lxx/_Exx) or a handler, or is using the implicit notify + * feature. Otherwise, the GPE will be immediately disabled by + * acpi_ev_gpe_dispatch the first time it fires. */ - if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) { + if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == + ACPI_GPE_DISPATCH_NONE) { return_ACPI_STATUS(AE_NO_HANDLER); } @@ -486,12 +487,26 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) return_VOID; } - /* - * Must check for control method type dispatch one more time to avoid a - * race with ev_gpe_install_handler - */ - if ((local_gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == - ACPI_GPE_DISPATCH_METHOD) { + /* Do the correct dispatch - normal method or implicit notify */ + + switch (local_gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) { + case ACPI_GPE_DISPATCH_NOTIFY: + + /* + * Implicit notify. + * Dispatch a DEVICE_WAKE notify to the appropriate handler. + * NOTE: the request is queued for execution after this method + * completes. The notify handlers are NOT invoked synchronously + * from this thread -- because handlers may in turn run other + * control methods. + */ + status = + acpi_ev_queue_notify_request(local_gpe_event_info->dispatch. + device_node, + ACPI_NOTIFY_DEVICE_WAKE); + break; + + case ACPI_GPE_DISPATCH_METHOD: /* Allocate the evaluation information block */ @@ -518,6 +533,11 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) (local_gpe_event_info->dispatch. method_node))); } + + break; + + default: + return_VOID; /* Should never happen */ } /* Defer enabling of GPE until all notify handlers are done */ @@ -531,6 +551,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) return_VOID; } + /******************************************************************************* * * FUNCTION: acpi_ev_asynch_enable_gpe @@ -541,38 +562,60 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) * RETURN: None * * DESCRIPTION: Asynchronous clear/enable for GPE. This allows the GPE to - * complete. + * complete (i.e., finish execution of Notify) * ******************************************************************************/ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_enable_gpe(void *context) { struct acpi_gpe_event_info *gpe_event_info = context; + + (void)acpi_ev_finish_gpe(gpe_event_info); + + ACPI_FREE(gpe_event_info); + return; +} + + +/******************************************************************************* + * + * FUNCTION: acpi_ev_finish_gpe + * + * PARAMETERS: gpe_event_info - Info for this GPE + * + * RETURN: Status + * + * DESCRIPTION: Clear/Enable a GPE. Common code that is used after execution + * of a GPE method or a synchronous or asynchronous GPE handler. + * + ******************************************************************************/ + +acpi_status acpi_ev_finish_gpe(struct acpi_gpe_event_info *gpe_event_info) +{ acpi_status status; if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) == ACPI_GPE_LEVEL_TRIGGERED) { /* - * GPE is level-triggered, we clear the GPE status bit after handling - * the event. + * GPE is level-triggered, we clear the GPE status bit after + * handling the event. */ status = acpi_hw_clear_gpe(gpe_event_info); if (ACPI_FAILURE(status)) { - goto exit; + return (status); } } /* - * Enable this GPE, conditionally. This means that the GPE will only be - * physically enabled if the enable_for_run bit is set in the event_info + * Enable this GPE, conditionally. This means that the GPE will + * only be physically enabled if the enable_for_run bit is set + * in the event_info. */ (void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_CONDITIONAL_ENABLE); - -exit: - ACPI_FREE(gpe_event_info); - return; + return (AE_OK); } + /******************************************************************************* * * FUNCTION: acpi_ev_gpe_dispatch @@ -595,6 +638,7 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) { acpi_status status; + u32 return_value; ACPI_FUNCTION_TRACE(ev_gpe_dispatch); @@ -616,54 +660,49 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, } /* - * Dispatch the GPE to either an installed handler, or the control method - * associated with this GPE (_Lxx or _Exx). If a handler exists, we invoke - * it and do not attempt to run the method. If there is neither a handler - * nor a method, we disable this GPE to prevent further such pointless - * events from firing. + * Always disable the GPE so that it does not keep firing before + * any asynchronous activity completes (either from the execution + * of a GPE method or an asynchronous GPE handler.) + * + * If there is no handler or method to run, just disable the + * GPE and leave it disabled permanently to prevent further such + * pointless events from firing. + */ + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "Unable to disable GPE%02X", gpe_number)); + return_UINT32(ACPI_INTERRUPT_NOT_HANDLED); + } + + /* + * Dispatch the GPE to either an installed handler or the control + * method associated with this GPE (_Lxx or _Exx). If a handler + * exists, we invoke it and do not attempt to run the method. + * If there is neither a handler nor a method, leave the GPE + * disabled. */ switch (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) { case ACPI_GPE_DISPATCH_HANDLER: - /* - * Invoke the installed handler (at interrupt level) - * Ignore return status for now. - * TBD: leave GPE disabled on error? - */ - (void)gpe_event_info->dispatch.handler->address(gpe_device, - gpe_number, - gpe_event_info-> - dispatch. - handler-> - context); - - /* It is now safe to clear level-triggered events. */ - - if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) == - ACPI_GPE_LEVEL_TRIGGERED) { - status = acpi_hw_clear_gpe(gpe_event_info); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "Unable to clear GPE[0x%2X]", - gpe_number)); - return_UINT32(ACPI_INTERRUPT_NOT_HANDLED); - } + /* Invoke the installed handler (at interrupt level) */ + + return_value = + gpe_event_info->dispatch.handler->address(gpe_device, + gpe_number, + gpe_event_info-> + dispatch.handler-> + context); + + /* If requested, clear (if level-triggered) and reenable the GPE */ + + if (return_value & ACPI_REENABLE_GPE) { + (void)acpi_ev_finish_gpe(gpe_event_info); } break; case ACPI_GPE_DISPATCH_METHOD: - - /* - * Disable the GPE, so it doesn't keep firing before the method has a - * chance to run (it runs asynchronously with interrupts enabled). - */ - status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "Unable to disable GPE[0x%2X]", - gpe_number)); - return_UINT32(ACPI_INTERRUPT_NOT_HANDLED); - } + case ACPI_GPE_DISPATCH_NOTIFY: /* * Execute the method associated with the GPE @@ -690,17 +729,6 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, "No handler or method for GPE[0x%2X], disabling event", gpe_number)); - /* - * Disable the GPE. The GPE will remain disabled a handler - * is installed or ACPICA is restarted. - */ - status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "Unable to disable GPE[0x%2X]", - gpe_number)); - return_UINT32(ACPI_INTERRUPT_NOT_HANDLED); - } break; } diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index 2a445dfcfdb4..e2e8164bb811 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -472,9 +472,14 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, gpe_index = (i * ACPI_GPE_REGISTER_WIDTH) + j; gpe_event_info = &gpe_block->event_info[gpe_index]; - /* Ignore GPEs that have no corresponding _Lxx/_Exx method */ - - if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD) + /* + * Ignore GPEs that have no corresponding _Lxx/_Exx method + * and GPEs that are used to wake the system + */ + if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == + ACPI_GPE_DISPATCH_NONE) + || ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) + == ACPI_GPE_DISPATCH_HANDLER) || (gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) { continue; } diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c index 4c8dea513b66..734a494bd705 100644 --- a/drivers/acpi/acpica/evgpeinit.c +++ b/drivers/acpi/acpica/evgpeinit.c @@ -415,6 +415,7 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle, * Add the GPE information from above to the gpe_event_info block for * use during dispatch of this GPE. */ + gpe_event_info->flags &= ~(ACPI_GPE_DISPATCH_MASK); gpe_event_info->flags |= (u8)(type | ACPI_GPE_DISPATCH_METHOD); gpe_event_info->dispatch.method_node = method_node; diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c index 99f77ab29729..fcf4a5cdc9a4 100644 --- a/drivers/acpi/acpica/evxfgpe.c +++ b/drivers/acpi/acpica/evxfgpe.c @@ -166,39 +166,75 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number) } ACPI_EXPORT_SYMBOL(acpi_disable_gpe) + /******************************************************************************* * * FUNCTION: acpi_setup_gpe_for_wake * - * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 - * gpe_number - GPE level within the GPE block + * PARAMETERS: wake_device - Device associated with the GPE (via _PRW) + * gpe_device - Parent GPE Device. NULL for GPE0/GPE1 + * gpe_number - GPE level within the GPE block * * RETURN: Status * - * DESCRIPTION: Set the ACPI_GPE_CAN_WAKE flag for the given GPE. If the GPE - * has a corresponding method and is currently enabled, disable it - * (GPEs with corresponding methods are enabled unconditionally - * during initialization, but GPEs that can wake up are expected - * to be initially disabled). + * DESCRIPTION: Mark a GPE as having the ability to wake the system. This + * interface is intended to be used as the host executes the + * _PRW methods (Power Resources for Wake) in the system tables. + * Each _PRW appears under a Device Object (The wake_device), and + * contains the info for the wake GPE associated with the + * wake_device. * ******************************************************************************/ -acpi_status acpi_setup_gpe_for_wake(acpi_handle gpe_device, u32 gpe_number) +acpi_status +acpi_setup_gpe_for_wake(acpi_handle wake_device, + acpi_handle gpe_device, u32 gpe_number) { - acpi_status status = AE_OK; + acpi_status status = AE_BAD_PARAMETER; struct acpi_gpe_event_info *gpe_event_info; + struct acpi_namespace_node *device_node; acpi_cpu_flags flags; ACPI_FUNCTION_TRACE(acpi_setup_gpe_for_wake); + /* Parameter Validation */ + + if (!wake_device) { + /* + * By forcing wake_device to be valid, we automatically enable the + * implicit notify feature on all hosts. + */ + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + /* Validate wake_device is of type Device */ + + device_node = ACPI_CAST_PTR(struct acpi_namespace_node, wake_device); + if (device_node->type != ACPI_TYPE_DEVICE) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); if (gpe_event_info) { + /* + * If there is no method or handler for this GPE, then the + * wake_device will be notified whenever this GPE fires (aka + * "implicit notify") Note: The GPE is assumed to be + * level-triggered (for windows compatibility). + */ + if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == + ACPI_GPE_DISPATCH_NONE) { + gpe_event_info->flags = + (ACPI_GPE_DISPATCH_NOTIFY | + ACPI_GPE_LEVEL_TRIGGERED); + gpe_event_info->dispatch.device_node = device_node; + } + gpe_event_info->flags |= ACPI_GPE_CAN_WAKE; - } else { - status = AE_BAD_PARAMETER; + status = AE_OK; } acpi_os_release_lock(acpi_gbl_gpe_lock, flags); diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 81887724de80..fa848c4116a8 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -619,7 +619,7 @@ static u32 acpi_ec_gpe_handler(acpi_handle gpe_device, wake_up(&ec->wait); ec_check_sci(ec, acpi_ec_read_status(ec)); } - return ACPI_INTERRUPT_HANDLED; + return ACPI_INTERRUPT_HANDLED | ACPI_REENABLE_GPE; } /* -------------------------------------------------------------------------- diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 70249b3d2934..ce6741ee1965 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -778,7 +778,7 @@ acpi_bus_extract_wakeup_device_power_package(acpi_handle handle, wakeup->resources.handles[i] = element->reference.handle; } - acpi_setup_gpe_for_wake(wakeup->gpe_device, wakeup->gpe_number); + acpi_setup_gpe_for_wake(handle, wakeup->gpe_device, wakeup->gpe_number); out: kfree(buffer.pointer); -- cgit v1.2.1 From a0fcdb237fcd4eaa7e5009b28ef5be07415f287d Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Mon, 13 Dec 2010 13:39:26 +0800 Subject: ACPICA: Global event handler The global event handler is called whenever a general purpose or fixed ACPI event occurs. Also update Linux OSL to collect events counter with global event handler. Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/acglobal.h | 5 +++++ drivers/acpi/acpica/evevent.c | 12 ++++++++-- drivers/acpi/acpica/evgpe.c | 9 +++++++- drivers/acpi/acpica/evxface.c | 51 ++++++++++++++++++++++++++++++++++++++++++ drivers/acpi/acpica/utglobal.c | 1 + drivers/acpi/sysfs.c | 19 ++++++++++++++-- 6 files changed, 92 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index fc694647699f..9bb69c59bb12 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -146,6 +146,9 @@ u8 acpi_gbl_system_awake_and_running; extern u32 acpi_gbl_nesting_level; +ACPI_EXTERN u32 acpi_gpe_count; +ACPI_EXTERN u32 acpi_fixed_event_count[ACPI_NUM_FIXED_EVENTS]; + /* Support for dynamic control method tracing mechanism */ ACPI_EXTERN u32 acpi_gbl_original_dbg_level; @@ -371,6 +374,8 @@ ACPI_EXTERN struct acpi_gpe_xrupt_info *acpi_gbl_gpe_xrupt_list_head; ACPI_EXTERN struct acpi_gpe_block_info *acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS]; ACPI_EXTERN u8 acpi_gbl_all_gpes_initialized; +ACPI_EXTERN ACPI_GBL_EVENT_HANDLER acpi_gbl_global_event_handler; +ACPI_EXTERN void *acpi_gbl_global_event_handler_context; /***************************************************************************** * diff --git a/drivers/acpi/acpica/evevent.c b/drivers/acpi/acpica/evevent.c index c61c3039c31a..e5e313c663a5 100644 --- a/drivers/acpi/acpica/evevent.c +++ b/drivers/acpi/acpica/evevent.c @@ -217,9 +217,17 @@ u32 acpi_ev_fixed_event_detect(void) status_bit_mask) && (fixed_enable & acpi_gbl_fixed_event_info[i]. enable_bit_mask)) { + /* + * Found an active (signalled) event. Invoke global event + * handler if present. + */ + acpi_fixed_event_count[i]++; + if (acpi_gbl_global_event_handler) { + acpi_gbl_global_event_handler + (ACPI_EVENT_TYPE_FIXED, NULL, i, + acpi_gbl_global_event_handler_context); + } - /* Found an active (signalled) event */ - acpi_os_fixed_event_count(i); int_status |= acpi_ev_fixed_event_dispatch(i); } } diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index 2dbca95979ce..3bcf5ef74c62 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -642,7 +642,14 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, ACPI_FUNCTION_TRACE(ev_gpe_dispatch); - acpi_os_gpe_count(gpe_number); + /* Invoke global event handler if present */ + + acpi_gpe_count++; + if (acpi_gbl_global_event_handler) { + acpi_gbl_global_event_handler(ACPI_EVENT_TYPE_GPE, gpe_device, + gpe_number, + acpi_gbl_global_event_handler_context); + } /* * If edge-triggered, clear the GPE status bit now. Note that diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c index d193b905dfa2..1226689bdb1b 100644 --- a/drivers/acpi/acpica/evxface.c +++ b/drivers/acpi/acpica/evxface.c @@ -92,6 +92,57 @@ acpi_status acpi_install_exception_handler(acpi_exception_handler handler) ACPI_EXPORT_SYMBOL(acpi_install_exception_handler) #endif /* ACPI_FUTURE_USAGE */ + +/******************************************************************************* + * + * FUNCTION: acpi_install_global_event_handler + * + * PARAMETERS: Handler - Pointer to the global event handler function + * Context - Value passed to the handler on each event + * + * RETURN: Status + * + * DESCRIPTION: Saves the pointer to the handler function. The global handler + * is invoked upon each incoming GPE and Fixed Event. It is + * invoked at interrupt level at the time of the event dispatch. + * Can be used to update event counters, etc. + * + ******************************************************************************/ +acpi_status +acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, void *context) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_install_global_event_handler); + + /* Parameter validation */ + + if (!handler) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Don't allow two handlers. */ + + if (acpi_gbl_global_event_handler) { + status = AE_ALREADY_EXISTS; + goto cleanup; + } + + acpi_gbl_global_event_handler = handler; + acpi_gbl_global_event_handler_context = context; + + cleanup: + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_global_event_handler) + /******************************************************************************* * * FUNCTION: acpi_install_fixed_event_handler diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c index a99c32aa48a4..508537f884ac 100644 --- a/drivers/acpi/acpica/utglobal.c +++ b/drivers/acpi/acpica/utglobal.c @@ -778,6 +778,7 @@ acpi_status acpi_ut_init_globals(void) acpi_gbl_init_handler = NULL; acpi_gbl_table_handler = NULL; acpi_gbl_interface_handler = NULL; + acpi_gbl_global_event_handler = NULL; /* Global Lock support */ diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index f8588f81048a..61891e75583d 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -438,7 +438,7 @@ static void delete_gpe_attr_array(void) return; } -void acpi_os_gpe_count(u32 gpe_number) +static void gpe_count(u32 gpe_number) { acpi_gpe_count++; @@ -454,7 +454,7 @@ void acpi_os_gpe_count(u32 gpe_number) return; } -void acpi_os_fixed_event_count(u32 event_number) +static void fixed_event_count(u32 event_number) { if (!all_counters) return; @@ -468,6 +468,16 @@ void acpi_os_fixed_event_count(u32 event_number) return; } +static void acpi_gbl_event_handler(u32 event_type, acpi_handle device, + u32 event_number, void *context) +{ + if (event_type == ACPI_EVENT_TYPE_GPE) + gpe_count(event_number); + + if (event_type == ACPI_EVENT_TYPE_FIXED) + fixed_event_count(event_number); +} + static int get_status(u32 index, acpi_event_status *status, acpi_handle *handle) { @@ -601,6 +611,7 @@ end: void acpi_irq_stats_init(void) { + acpi_status status; int i; if (all_counters) @@ -619,6 +630,10 @@ void acpi_irq_stats_init(void) if (all_counters == NULL) goto fail; + status = acpi_install_global_event_handler(acpi_gbl_event_handler, NULL); + if (ACPI_FAILURE(status)) + goto fail; + counter_attrs = kzalloc(sizeof(struct kobj_attribute) * (num_counters), GFP_KERNEL); if (counter_attrs == NULL) -- cgit v1.2.1 From da50337373c90c15c6db6ed4239e87c5a3806f9a Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Mon, 13 Dec 2010 13:39:37 +0800 Subject: ACPICA: Misc comments to minimize code divergence Modify/add some comments to minimize ACPICA/linux GPE code divergence. Acked-by: Rafael J. Wysocki Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/achware.h | 2 +- drivers/acpi/acpica/evgpe.c | 21 +++++++++++++-------- drivers/acpi/acpica/evgpeblk.c | 18 ++++++++---------- drivers/acpi/acpica/evgpeinit.c | 24 ++++++++++++++++++++---- drivers/acpi/acpica/evxfgpe.c | 32 +++++++++++++++++++++----------- drivers/acpi/acpica/hwgpe.c | 30 ++++++++++++++++++------------ 6 files changed, 81 insertions(+), 46 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index 167470ad2d21..258d628793ea 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -94,7 +94,7 @@ u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info, struct acpi_gpe_register_info *gpe_register_info); acpi_status -acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action); +acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action); acpi_status acpi_hw_disable_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index 3bcf5ef74c62..7c339d34ab42 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -104,7 +104,7 @@ acpi_ev_update_gpe_enable_mask(struct acpi_gpe_event_info *gpe_event_info) * * RETURN: Status * - * DESCRIPTION: Clear the given GPE from stale events and enable it. + * DESCRIPTION: Clear a GPE of stale events and enable it. * ******************************************************************************/ acpi_status @@ -142,7 +142,7 @@ acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) * * FUNCTION: acpi_ev_add_gpe_reference * - * PARAMETERS: gpe_event_info - GPE to enable + * PARAMETERS: gpe_event_info - Add a reference to this GPE * * RETURN: Status * @@ -163,6 +163,9 @@ acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info gpe_event_info->runtime_count++; if (gpe_event_info->runtime_count == 1) { + + /* Enable on first reference */ + status = acpi_ev_update_gpe_enable_mask(gpe_event_info); if (ACPI_SUCCESS(status)) { status = acpi_ev_enable_gpe(gpe_event_info); @@ -180,7 +183,7 @@ acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info * * FUNCTION: acpi_ev_remove_gpe_reference * - * PARAMETERS: gpe_event_info - GPE to disable + * PARAMETERS: gpe_event_info - Remove a reference to this GPE * * RETURN: Status * @@ -201,6 +204,9 @@ acpi_status acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_i gpe_event_info->runtime_count--; if (!gpe_event_info->runtime_count) { + + /* Disable on last reference */ + status = acpi_ev_update_gpe_enable_mask(gpe_event_info); if (ACPI_SUCCESS(status)) { status = acpi_hw_low_set_gpe(gpe_event_info, @@ -386,7 +392,7 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list) } ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS, - "Read GPE Register at GPE%X: Status=%02X, Enable=%02X\n", + "Read GPE Register at GPE%02X: Status=%02X, Enable=%02X\n", gpe_register_info->base_gpe_number, status_reg, enable_reg)); @@ -660,8 +666,7 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, status = acpi_hw_clear_gpe(gpe_event_info); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, - "Unable to clear GPE[0x%2X]", - gpe_number)); + "Unable to clear GPE%02X", gpe_number)); return_UINT32(ACPI_INTERRUPT_NOT_HANDLED); } } @@ -720,7 +725,7 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, gpe_event_info); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, - "Unable to queue handler for GPE[0x%2X] - event disabled", + "Unable to queue handler for GPE%2X - event disabled", gpe_number)); } break; @@ -733,7 +738,7 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, * a GPE to be enabled if it has no handler or method. */ ACPI_ERROR((AE_INFO, - "No handler or method for GPE[0x%2X], disabling event", + "No handler or method for GPE%02X, disabling event", gpe_number)); break; diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index e2e8164bb811..9acb86958c09 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -361,9 +361,9 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, gpe_block->node = gpe_device; gpe_block->gpe_count = (u16)(register_count * ACPI_GPE_REGISTER_WIDTH); + gpe_block->initialized = FALSE; gpe_block->register_count = register_count; gpe_block->block_base_number = gpe_block_base_number; - gpe_block->initialized = FALSE; ACPI_MEMCPY(&gpe_block->block_address, gpe_block_address, sizeof(struct acpi_generic_address)); @@ -423,14 +423,12 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, * * FUNCTION: acpi_ev_initialize_gpe_block * - * PARAMETERS: gpe_device - Handle to the parent GPE block - * gpe_block - Gpe Block info + * PARAMETERS: acpi_gpe_callback * * RETURN: Status * - * DESCRIPTION: Initialize and enable a GPE block. First find and run any - * _PRT methods associated with the block, then enable the - * appropriate GPEs. + * DESCRIPTION: Initialize and enable a GPE block. Enable GPEs that have + * associated methods. * Note: Assumes namespace is locked. * ******************************************************************************/ @@ -450,8 +448,8 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, ACPI_FUNCTION_TRACE(ev_initialize_gpe_block); /* - * Ignore a null GPE block (e.g., if no GPE block 1 exists) and - * GPE blocks that have been initialized already. + * Ignore a null GPE block (e.g., if no GPE block 1 exists), and + * any GPE blocks that have been initialized already. */ if (!gpe_block || gpe_block->initialized) { return_ACPI_STATUS(AE_OK); @@ -459,8 +457,8 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, /* * Enable all GPEs that have a corresponding method and have the - * ACPI_GPE_CAN_WAKE flag unset. Any other GPEs within this block must - * be enabled via the acpi_enable_gpe() interface. + * ACPI_GPE_CAN_WAKE flag unset. Any other GPEs within this block + * must be enabled via the acpi_enable_gpe() interface. */ gpe_enabled_count = 0; diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c index 734a494bd705..c59dc2340593 100644 --- a/drivers/acpi/acpica/evgpeinit.c +++ b/drivers/acpi/acpica/evgpeinit.c @@ -45,11 +45,27 @@ #include "accommon.h" #include "acevents.h" #include "acnamesp.h" -#include "acinterp.h" #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpeinit") +/* + * Note: History of _PRW support in ACPICA + * + * Originally (2000 - 2010), the GPE initialization code performed a walk of + * the entire namespace to execute the _PRW methods and detect all GPEs + * capable of waking the system. + * + * As of 10/2010, the _PRW method execution has been removed since it is + * actually unnecessary. The host OS must in fact execute all _PRW methods + * in order to identify the device/power-resource dependencies. We now put + * the onus on the host OS to identify the wake GPEs as part of this process + * and to inform ACPICA of these GPEs via the acpi_setup_gpe_for_wake interface. This + * not only reduces the complexity of the ACPICA initialization code, but in + * some cases (on systems with very large namespaces) it should reduce the + * kernel boot time as well. + */ + /******************************************************************************* * * FUNCTION: acpi_ev_gpe_initialize @@ -222,7 +238,7 @@ void acpi_ev_update_gpes(acpi_owner_id table_owner_id) acpi_status status = AE_OK; /* - * 2) Find any _Lxx/_Exx GPE methods that have just been loaded. + * Find any _Lxx/_Exx GPE methods that have just been loaded. * * Any GPEs that correspond to new _Lxx/_Exx methods are immediately * enabled. @@ -235,9 +251,9 @@ void acpi_ev_update_gpes(acpi_owner_id table_owner_id) return; } + walk_info.count = 0; walk_info.owner_id = table_owner_id; walk_info.execute_by_owner_id = TRUE; - walk_info.count = 0; /* Walk the interrupt level descriptor list */ @@ -298,7 +314,7 @@ void acpi_ev_update_gpes(acpi_owner_id table_owner_id) * xx - is the GPE number [in HEX] * * If walk_info->execute_by_owner_id is TRUE, we only execute examine GPE methods - * with that owner. + * with that owner. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c index fcf4a5cdc9a4..416845bc9c1f 100644 --- a/drivers/acpi/acpica/evxfgpe.c +++ b/drivers/acpi/acpica/evxfgpe.c @@ -55,13 +55,19 @@ ACPI_MODULE_NAME("evxfgpe") * * PARAMETERS: None * - * RETURN: None + * RETURN: Status + * + * DESCRIPTION: Complete GPE initialization and enable all GPEs that have + * associated _Lxx or _Exx methods and are not pointed to by any + * device _PRW methods (this indicates that these GPEs are + * generally intended for system or device wakeup. Such GPEs + * have to be enabled directly when the devices whose _PRW + * methods point to them are set up for wakeup signaling.) * - * DESCRIPTION: Enable all GPEs that have associated _Lxx or _Exx methods and - * are not pointed to by any device _PRW methods indicating that - * these GPEs are generally intended for system or device wakeup - * (such GPEs have to be enabled directly when the devices whose - * _PRW methods point to them are set up for wakeup signaling). + * NOTE: Should be called after any GPEs are added to the system. Primarily, + * after the system _PRW methods have been run, but also after a GPE Block + * Device has been added or if any new GPE methods have been added via a + * dynamic table load. * ******************************************************************************/ @@ -252,7 +258,8 @@ ACPI_EXPORT_SYMBOL(acpi_setup_gpe_for_wake) * * RETURN: Status * - * DESCRIPTION: Set or clear the GPE's wakeup enable mask bit. + * DESCRIPTION: Set or clear the GPE's wakeup enable mask bit. The GPE must + * already be marked as a WAKE GPE. * ******************************************************************************/ @@ -268,8 +275,10 @@ acpi_status acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 ac flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); - /* Ensure that we have a valid GPE number */ - + /* + * Ensure that we have a valid GPE number and that this GPE is in + * fact a wake GPE + */ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); if (!gpe_event_info) { status = AE_BAD_PARAMETER; @@ -366,7 +375,7 @@ ACPI_EXPORT_SYMBOL(acpi_clear_gpe) * * RETURN: Status * - * DESCRIPTION: Get status of an event (general purpose) + * DESCRIPTION: Get the current status of a GPE (signalled/not_signalled) * ******************************************************************************/ acpi_status @@ -476,7 +485,8 @@ ACPI_EXPORT_SYMBOL(acpi_enable_all_runtime_gpes) * * RETURN: Status * - * DESCRIPTION: Create and Install a block of GPE registers + * DESCRIPTION: Create and Install a block of GPE registers. The GPEs are not + * enabled here. * ******************************************************************************/ acpi_status diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index 7c6d4858bb49..85c3cbd4304d 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -62,10 +62,10 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, * PARAMETERS: gpe_event_info - Info block for the GPE * gpe_register_info - Info block for the GPE register * - * RETURN: Status + * RETURN: Register mask with a one in the GPE bit position * - * DESCRIPTION: Compute GPE enable mask with one bit corresponding to the given - * GPE set. + * DESCRIPTION: Compute the register mask for this GPE. One bit is set in the + * correct position for the input GPE. * ******************************************************************************/ @@ -85,12 +85,12 @@ u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info, * * RETURN: Status * - * DESCRIPTION: Enable or disable a single GPE in its enable register. + * DESCRIPTION: Enable or disable a single GPE in the parent enable register. * ******************************************************************************/ acpi_status -acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action) +acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action) { struct acpi_gpe_register_info *gpe_register_info; acpi_status status; @@ -113,14 +113,20 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action) return (status); } - /* Set ot clear just the bit that corresponds to this GPE */ + /* Set or clear just the bit that corresponds to this GPE */ register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info, gpe_register_info); switch (action) { case ACPI_GPE_CONDITIONAL_ENABLE: - if (!(register_bit & gpe_register_info->enable_for_run)) + + /* Only enable if the enable_for_run bit is set */ + + if (!(register_bit & gpe_register_info->enable_for_run)) { return (AE_BAD_PARAMETER); + } + + /*lint -fallthrough */ case ACPI_GPE_ENABLE: ACPI_SET_BIT(enable_mask, register_bit); @@ -131,7 +137,7 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action) break; default: - ACPI_ERROR((AE_INFO, "Invalid action\n")); + ACPI_ERROR((AE_INFO, "Invalid GPE Action, %u\n", action)); return (AE_BAD_PARAMETER); } @@ -168,13 +174,13 @@ acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info) return (AE_NOT_EXIST); } - register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info, - gpe_register_info); - /* * Write a one to the appropriate bit in the status register to * clear this GPE. */ + register_bit = + acpi_hw_get_gpe_register_bit(gpe_event_info, gpe_register_info); + status = acpi_hw_write(register_bit, &gpe_register_info->status_address); @@ -201,8 +207,8 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info, u32 in_byte; u32 register_bit; struct acpi_gpe_register_info *gpe_register_info; - acpi_status status; acpi_event_status local_event_status = 0; + acpi_status status; ACPI_FUNCTION_ENTRY(); -- cgit v1.2.1 From 32a00d274e877eab3ea7ab196b75c9be5170d25e Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 25 Nov 2010 00:05:17 +0100 Subject: ACPI / PM: Prevent acpi_power_get_inferred_state() from making changes acpi_power_get_inferred_state() should not update device->power.state behind the back of its caller, so make it return the state via a pointer instead. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/bus.c | 3 ++- drivers/acpi/internal.h | 2 +- drivers/acpi/power.c | 12 ++++-------- 3 files changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index d68bd61072bb..a9fe8e6bc40e 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -222,7 +222,8 @@ int acpi_bus_get_power(acpi_handle handle, int *state) * indirectly (via power resources). */ if (device->power.flags.power_resources) { - result = acpi_power_get_inferred_state(device); + result = acpi_power_get_inferred_state(device, + &device->power.state); if (result) return result; } else if (device->power.flags.explicit_get) { diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index a212bfeddf8c..2cc01489dccf 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -41,7 +41,7 @@ static inline int acpi_debugfs_init(void) { return 0; } int acpi_power_init(void); int acpi_device_sleep_wake(struct acpi_device *dev, int enable, int sleep_state, int dev_state); -int acpi_power_get_inferred_state(struct acpi_device *device); +int acpi_power_get_inferred_state(struct acpi_device *device, int *state); int acpi_power_transition(struct acpi_device *device, int state); extern int acpi_power_nocheck; diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 4c9c2fb5d98f..9bd1b6044b55 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -423,19 +423,16 @@ int acpi_disable_wakeup_device_power(struct acpi_device *dev) Device Power Management -------------------------------------------------------------------------- */ -int acpi_power_get_inferred_state(struct acpi_device *device) +int acpi_power_get_inferred_state(struct acpi_device *device, int *state) { int result = 0; struct acpi_handle_list *list = NULL; int list_state = 0; int i = 0; - - if (!device) + if (!device || !state) return -EINVAL; - device->power.state = ACPI_STATE_UNKNOWN; - /* * We know a device's inferred power state when all the resources * required for a given D-state are 'on'. @@ -450,13 +447,12 @@ int acpi_power_get_inferred_state(struct acpi_device *device) return result; if (list_state == ACPI_POWER_RESOURCE_STATE_ON) { - device->power.state = i; + *state = i; return 0; } } - device->power.state = ACPI_STATE_D3; - + *state = ACPI_STATE_D3; return 0; } -- cgit v1.2.1 From d2ef555b57292cd818934636ac8e3414cc2a6762 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 25 Nov 2010 00:06:09 +0100 Subject: ACPI / PM: Add functions for manipulating lists of power resources ACPI device power resources should be reference counted during device initialization, so that their reference counters are always up to date. It is convenient to do that with the help of a function that will reference count and possibly turn on power resources in a given list, so introduce that function, acpi_power_on_list(). For symmetry, introduce acpi_power_off_list() for performing the reverse operation and use the both of them to simplify acpi_power_transition(). Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/power.c | 67 +++++++++++++++++++++++++++++----------------------- 1 file changed, 38 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 9bd1b6044b55..95fedbdf4fb8 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -266,6 +266,35 @@ static int acpi_power_off_device(acpi_handle handle) return result; } +static void __acpi_power_off_list(struct acpi_handle_list *list, int num_res) +{ + int i; + + for (i = num_res - 1; i >= 0 ; i--) + acpi_power_off_device(list->handles[i]); +} + +static void acpi_power_off_list(struct acpi_handle_list *list) +{ + __acpi_power_off_list(list, list->count); +} + +static int acpi_power_on_list(struct acpi_handle_list *list) +{ + int result = 0; + int i; + + for (i = 0; i < list->count; i++) { + result = acpi_power_on(list->handles[i]); + if (result) { + __acpi_power_off_list(list, i); + break; + } + } + + return result; +} + /** * acpi_device_sleep_wake - execute _DSW (Device Sleep Wake) or (deprecated in * ACPI 3.0) _PSW (Power State Wake) @@ -458,10 +487,7 @@ int acpi_power_get_inferred_state(struct acpi_device *device, int *state) int acpi_power_transition(struct acpi_device *device, int state) { - int result = 0; - struct acpi_handle_list *cl = NULL; /* Current Resources */ - struct acpi_handle_list *tl = NULL; /* Target Resources */ - int i = 0; + int result; if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3)) return -EINVAL; @@ -473,37 +499,20 @@ int acpi_power_transition(struct acpi_device *device, int state) || (device->power.state > ACPI_STATE_D3)) return -ENODEV; - cl = &device->power.states[device->power.state].resources; - tl = &device->power.states[state].resources; - /* TBD: Resources must be ordered. */ /* * First we reference all power resources required in the target list - * (e.g. so the device doesn't lose power while transitioning). + * (e.g. so the device doesn't lose power while transitioning). Then, + * we dereference all power resources used in the current list. */ - for (i = 0; i < tl->count; i++) { - result = acpi_power_on(tl->handles[i]); - if (result) - goto end; - } + result = acpi_power_on_list(&device->power.states[state].resources); + if (!result) + acpi_power_off_list( + &device->power.states[device->power.state].resources); - /* - * Then we dereference all power resources used in the current list. - */ - for (i = 0; i < cl->count; i++) { - result = acpi_power_off_device(cl->handles[i]); - if (result) - goto end; - } - - end: - if (result) - device->power.state = ACPI_STATE_UNKNOWN; - else { - /* We shouldn't change the state till all above operations succeed */ - device->power.state = state; - } + /* We shouldn't change the state unless the above operations succeed. */ + device->power.state = result ? ACPI_STATE_UNKNOWN : state; return result; } -- cgit v1.2.1 From 30d3df41b32b1ea63d3ebc52ef5644cbe41520f4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 25 Nov 2010 00:06:55 +0100 Subject: ACPI / PM: Introduce function for refcounting device power resources Introduce function acpi_power_on_resources() that reference counts and possibly turns on ACPI power resources for a given device and a given power state of it. This function will be used for reference counting device power resources during initialization. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/internal.h | 1 + drivers/acpi/power.c | 8 ++++++++ 2 files changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 2cc01489dccf..433a8ee8ac2c 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -42,6 +42,7 @@ int acpi_power_init(void); int acpi_device_sleep_wake(struct acpi_device *dev, int enable, int sleep_state, int dev_state); int acpi_power_get_inferred_state(struct acpi_device *device, int *state); +int acpi_power_on_resources(struct acpi_device *device, int state); int acpi_power_transition(struct acpi_device *device, int state); extern int acpi_power_nocheck; diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 95fedbdf4fb8..0cb4eab50d73 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -485,6 +485,14 @@ int acpi_power_get_inferred_state(struct acpi_device *device, int *state) return 0; } +int acpi_power_on_resources(struct acpi_device *device, int state) +{ + if (!device || state < ACPI_STATE_D0 || state > ACPI_STATE_D3) + return -EINVAL; + + return acpi_power_on_list(&device->power.states[state].resources); +} + int acpi_power_transition(struct acpi_device *device, int state) { int result; -- cgit v1.2.1 From 5e6d4fe4296782f1f095575b8213a97c3e925a16 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 25 Nov 2010 00:07:56 +0100 Subject: ACPI / PM: Introduce __acpi_bus_get_power() It sometimes is necessary to get the power state of an ACPI device without updating its device->power.state field, for example to avoid inconsistencies between device->power.state and the reference counters of the device's power resources. For this purpose introduce __acpi_bus_get_power() that will return the given device's power state via a pointer (instead of modifying device->power.state) and make acpi_bus_get_power() use it. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/bus.c | 48 +++++++++++++++++++++++++++++------------------- 1 file changed, 29 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index a9fe8e6bc40e..9657abc4a7fb 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -196,34 +196,24 @@ EXPORT_SYMBOL(acpi_bus_get_private_data); Power Management -------------------------------------------------------------------------- */ -int acpi_bus_get_power(acpi_handle handle, int *state) +static int __acpi_bus_get_power(struct acpi_device *device, int *state) { int result = 0; acpi_status status = 0; - struct acpi_device *device = NULL; unsigned long long psc = 0; - - result = acpi_bus_get_device(handle, &device); - if (result) - return result; + if (!device || !state) + return -EINVAL; *state = ACPI_STATE_UNKNOWN; - if (!device->flags.power_manageable) { - /* TBD: Non-recursive algorithm for walking up hierarchy */ - if (device->parent) - *state = device->parent->power.state; - else - *state = ACPI_STATE_D0; - } else { + if (device->flags.power_manageable) { /* * Get the device's power state either directly (via _PSC) or * indirectly (via power resources). */ if (device->power.flags.power_resources) { - result = acpi_power_get_inferred_state(device, - &device->power.state); + result = acpi_power_get_inferred_state(device, state); if (result) return result; } else if (device->power.flags.explicit_get) { @@ -231,20 +221,40 @@ int acpi_bus_get_power(acpi_handle handle, int *state) NULL, &psc); if (ACPI_FAILURE(status)) return -ENODEV; - device->power.state = (int)psc; + *state = (int)psc; } - - *state = device->power.state; + } else { + /* TBD: Non-recursive algorithm for walking up hierarchy. */ + *state = device->parent ? + device->parent->power.state : ACPI_STATE_D0; } ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] power state is D%d\n", - device->pnp.bus_id, device->power.state)); + device->pnp.bus_id, *state)); return 0; } + +int acpi_bus_get_power(acpi_handle handle, int *state) +{ + struct acpi_device *device; + int result; + + result = acpi_bus_get_device(handle, &device); + if (result) + return result; + + result = __acpi_bus_get_power(device, state); + if (result) + return result; + + device->power.state = *state; + return 0; +} EXPORT_SYMBOL(acpi_bus_get_power); + int acpi_bus_set_power(acpi_handle handle, int state) { int result = 0; -- cgit v1.2.1 From ade3e7fef794781c0798d0cf0f046123842ba550 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 25 Nov 2010 00:08:36 +0100 Subject: ACPI / PM: Add function for device power state initialization Add function acpi_bus_init_power() for getting the initial power state of an ACPI device and reference counting its power resources as appropriate. Make acpi_bus_get_power_flags() use the new function instead of acpi_bus_get_power() that updates device->power.state without reference counting the device's power resources. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/bus.c | 25 +++++++++++++++++++++++++ drivers/acpi/internal.h | 1 + drivers/acpi/scan.c | 5 +---- 3 files changed, 27 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 9657abc4a7fb..453451090502 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -364,6 +364,31 @@ int acpi_bus_set_power(acpi_handle handle, int state) EXPORT_SYMBOL(acpi_bus_set_power); + +int acpi_bus_init_power(struct acpi_device *device) +{ + int state; + int result; + + if (!device) + return -EINVAL; + + device->power.state = ACPI_STATE_UNKNOWN; + + result = __acpi_bus_get_power(device, &state); + if (result) + return result; + + if (device->power.flags.power_resources) + result = acpi_power_on_resources(device, state); + + if (!result) + device->power.state = state; + + return result; +} + + bool acpi_bus_power_manageable(acpi_handle handle) { struct acpi_device *device; diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 433a8ee8ac2c..7493e6c7a003 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -44,6 +44,7 @@ int acpi_device_sleep_wake(struct acpi_device *dev, int acpi_power_get_inferred_state(struct acpi_device *device, int *state); int acpi_power_on_resources(struct acpi_device *device, int state); int acpi_power_transition(struct acpi_device *device, int state); +int acpi_bus_init_power(struct acpi_device *device); extern int acpi_power_nocheck; int acpi_wakeup_device_init(void); diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 29ef505c487b..ef8e659771e1 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -901,10 +901,7 @@ static int acpi_bus_get_power_flags(struct acpi_device *device) device->power.states[ACPI_STATE_D3].flags.valid = 1; device->power.states[ACPI_STATE_D3].power = 0; - /* TBD: System wake support and resource requirements. */ - - device->power.state = ACPI_STATE_UNKNOWN; - acpi_bus_get_power(device->handle, &(device->power.state)); + acpi_bus_init_power(device); return 0; } -- cgit v1.2.1 From 25eed40720fc9005c63a1f436e5f8a78836c26ff Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 25 Nov 2010 00:09:15 +0100 Subject: ACPI / PM: Add function for updating device power state consistently Add function acpi_bus_update_power() for reading the actual power state of an ACPI device and updating its device->power.state field in such a way that its power resources' reference counters will remain consistent with that field. For this purpose introduce __acpi_bus_set_power() setting the power state of an ACPI device without updating its device->power.state field and make acpi_bus_set_power() and acpi_bus_update_power() use it (acpi_bus_set_power() retains the current behavior for now). Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/bus.c | 90 ++++++++++++++++++++++++++++++++++++------------------ 1 file changed, 61 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 453451090502..19decee72e92 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -255,44 +255,17 @@ int acpi_bus_get_power(acpi_handle handle, int *state) EXPORT_SYMBOL(acpi_bus_get_power); -int acpi_bus_set_power(acpi_handle handle, int state) +static int __acpi_bus_set_power(struct acpi_device *device, int state) { int result = 0; acpi_status status = AE_OK; - struct acpi_device *device = NULL; char object_name[5] = { '_', 'P', 'S', '0' + state, '\0' }; - - result = acpi_bus_get_device(handle, &device); - if (result) - return result; - - if ((state < ACPI_STATE_D0) || (state > ACPI_STATE_D3)) + if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3)) return -EINVAL; /* Make sure this is a valid target state */ - if (!device->flags.power_manageable) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device `[%s]' is not power manageable\n", - kobject_name(&device->dev.kobj))); - return -ENODEV; - } - /* - * Get device's current power state - */ - if (!acpi_power_nocheck) { - /* - * Maybe the incorrect power state is returned on the bogus - * bios, which is different with the real power state. - * For example: the bios returns D0 state and the real power - * state is D3. OS expects to set the device to D0 state. In - * such case if OS uses the power state returned by the BIOS, - * the device can't be transisted to the correct power state. - * So if the acpi_power_nocheck is set, it is unnecessary to - * get the power state by calling acpi_bus_get_power. - */ - acpi_bus_get_power(device->handle, &device->power.state); - } if ((state == device->power.state) && !device->flags.force_power_state) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n", state)); @@ -362,6 +335,42 @@ int acpi_bus_set_power(acpi_handle handle, int state) return result; } + +int acpi_bus_set_power(acpi_handle handle, int state) +{ + struct acpi_device *device; + int result; + + result = acpi_bus_get_device(handle, &device); + if (result) + return result; + + if (!device->flags.power_manageable) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Device [%s] is not power manageable\n", + dev_name(&device->dev))); + return -ENODEV; + } + + /* + * Get device's current power state + */ + if (!acpi_power_nocheck) { + /* + * Maybe the incorrect power state is returned on the bogus + * bios, which is different with the real power state. + * For example: the bios returns D0 state and the real power + * state is D3. OS expects to set the device to D0 state. In + * such case if OS uses the power state returned by the BIOS, + * the device can't be transisted to the correct power state. + * So if the acpi_power_nocheck is set, it is unnecessary to + * get the power state by calling acpi_bus_get_power. + */ + __acpi_bus_get_power(device, &device->power.state); + } + + return __acpi_bus_set_power(device, state); +} EXPORT_SYMBOL(acpi_bus_set_power); @@ -389,6 +398,29 @@ int acpi_bus_init_power(struct acpi_device *device) } +int acpi_bus_update_power(acpi_handle handle, int *state_p) +{ + struct acpi_device *device; + int state; + int result; + + result = acpi_bus_get_device(handle, &device); + if (result) + return result; + + result = __acpi_bus_get_power(device, &state); + if (result) + return result; + + result = __acpi_bus_set_power(device, state); + if (!result && state_p) + *state_p = state; + + return result; +} +EXPORT_SYMBOL_GPL(acpi_bus_update_power); + + bool acpi_bus_power_manageable(acpi_handle handle) { struct acpi_device *device; -- cgit v1.2.1 From 97d9a9e9f5ee68f20005ca5aa77c6b684e7cace8 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 25 Nov 2010 00:10:02 +0100 Subject: ACPI / PM: Register acpi_power_driver early The ACPI device driver used for handling power resources, acpi_power_driver, creates a struct acpi_power_resource object for each ACPI device representing a power resource. These objects are then used when setting and reading the power states of devices using the corresponding power resources. Unfortunately, acpi_power_driver is registered after acpi_scan_init() that may add devices using the power resources before acpi_power_driver has a chance to create struct acpi_power_resource objects for them (specifically, the power resources may be referred to during the scanning process through acpi_bus_get_power() before they have been initialized). As the first step towards fixing this issue, move the registration of acpi_power_driver into acpi_scan_init() so that power resource devices can be initialized by it as soon as they have been found in the namespace. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/bus.c | 1 - drivers/acpi/scan.c | 2 ++ 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 19decee72e92..47864013c0df 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -1099,7 +1099,6 @@ static int __init acpi_init(void) acpi_scan_init(); acpi_ec_init(); - acpi_power_init(); acpi_debugfs_init(); acpi_sleep_proc_init(); acpi_wakeup_device_init(); diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index ef8e659771e1..2951a27303cb 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1570,6 +1570,8 @@ int __init acpi_scan_init(void) printk(KERN_ERR PREFIX "Could not register bus type\n"); } + acpi_power_init(); + /* * Enumerate devices in the ACPI namespace. */ -- cgit v1.2.1 From bf325f9538d8c89312be305b9779edbcb436af00 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 25 Nov 2010 00:10:44 +0100 Subject: ACPI / PM: Register power resource devices as soon as they are needed Depending on the organization of the ACPI namespace, power resource device objects may generally be scanned after the "regular" device objects that they are referred from through _PRn. This, in turn, may cause acpi_bus_get_power_flags() to attempt to access them through acpi_bus_init_power() before they are registered (and initialized by acpi_power_driver). [This is not a theoretical issue, it actually happens for one PnP device on my testbed HP nx6325.] To fix this problem, make acpi_bus_get_power_flags() attempt to register power resource devices as soon as they have been found in the _PRn output for any other devices. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/scan.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 2951a27303cb..cb7956c23ca4 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -847,6 +847,8 @@ end: return 0; } +static void acpi_bus_add_power_resource(acpi_handle handle); + static int acpi_bus_get_power_flags(struct acpi_device *device) { acpi_status status = 0; @@ -875,8 +877,12 @@ static int acpi_bus_get_power_flags(struct acpi_device *device) acpi_evaluate_reference(device->handle, object_name, NULL, &ps->resources); if (ps->resources.count) { + int j; + device->power.flags.power_resources = 1; ps->flags.valid = 1; + for (j = 0; j < ps->resources.count; j++) + acpi_bus_add_power_resource(ps->resources.handles[j]); } /* Evaluate "_PSx" to see if we can do explicit sets */ @@ -1323,6 +1329,20 @@ end: #define ACPI_STA_DEFAULT (ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED | \ ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING) +static void acpi_bus_add_power_resource(acpi_handle handle) +{ + struct acpi_bus_ops ops = { + .acpi_op_add = 1, + .acpi_op_start = 1, + }; + struct acpi_device *device = NULL; + + acpi_bus_get_device(handle, &device); + if (!device) + acpi_add_single_object(&device, handle, ACPI_BUS_TYPE_POWER, + ACPI_STA_DEFAULT, &ops); +} + static int acpi_bus_type_and_status(acpi_handle handle, int *type, unsigned long long *sta) { -- cgit v1.2.1 From 488a76c52606199100adf09c8eb7cbedbd94e9d9 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 25 Nov 2010 00:11:24 +0100 Subject: ACPI / Fan: Rework the handling of power resources Use the new function acpi_bus_update_power() for manipulating power resources used by ACPI fan devices, which allows them to be put into the right state during initialization and resume. Consequently, remove the flags.force_power_state field from struct acpi_device, which is not necessary any more. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/bus.c | 2 +- drivers/acpi/fan.c | 27 +++++++-------------------- drivers/acpi/thermal.c | 5 +++-- 3 files changed, 11 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 47864013c0df..2ee83b5fff97 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -266,7 +266,7 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state) /* Make sure this is a valid target state */ - if ((state == device->power.state) && !device->flags.force_power_state) { + if (state == device->power.state) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n", state)); return 0; diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index 60049080c869..467479f07c1f 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -86,7 +86,7 @@ static int fan_get_cur_state(struct thermal_cooling_device *cdev, unsigned long if (!device) return -EINVAL; - result = acpi_bus_get_power(device->handle, &acpi_state); + result = acpi_bus_update_power(device->handle, &acpi_state); if (result) return result; @@ -123,7 +123,6 @@ static struct thermal_cooling_device_ops fan_cooling_ops = { static int acpi_fan_add(struct acpi_device *device) { int result = 0; - int state = 0; struct thermal_cooling_device *cdev; if (!device) @@ -132,16 +131,12 @@ static int acpi_fan_add(struct acpi_device *device) strcpy(acpi_device_name(device), "Fan"); strcpy(acpi_device_class(device), ACPI_FAN_CLASS); - result = acpi_bus_get_power(device->handle, &state); + result = acpi_bus_update_power(device->handle, NULL); if (result) { - printk(KERN_ERR PREFIX "Reading power state\n"); + printk(KERN_ERR PREFIX "Setting initial power state\n"); goto end; } - device->flags.force_power_state = 1; - acpi_bus_set_power(device->handle, state); - device->flags.force_power_state = 0; - cdev = thermal_cooling_device_register("Fan", device, &fan_cooling_ops); if (IS_ERR(cdev)) { @@ -200,22 +195,14 @@ static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state) static int acpi_fan_resume(struct acpi_device *device) { - int result = 0; - int power_state = 0; + int result; if (!device) return -EINVAL; - result = acpi_bus_get_power(device->handle, &power_state); - if (result) { - printk(KERN_ERR PREFIX - "Error reading fan power state\n"); - return result; - } - - device->flags.force_power_state = 1; - acpi_bus_set_power(device->handle, power_state); - device->flags.force_power_state = 0; + result = acpi_bus_update_power(device->handle, NULL); + if (result) + printk(KERN_ERR PREFIX "Error updating fan power state\n"); return result; } diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 5a27b0a31315..2607e17b520f 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -1059,8 +1059,9 @@ static int acpi_thermal_resume(struct acpi_device *device) break; tz->trips.active[i].flags.enabled = 1; for (j = 0; j < tz->trips.active[i].devices.count; j++) { - result = acpi_bus_get_power(tz->trips.active[i].devices. - handles[j], &power_state); + result = acpi_bus_update_power( + tz->trips.active[i].devices.handles[j], + &power_state); if (result || (power_state != ACPI_STATE_D0)) { tz->trips.active[i].flags.enabled = 0; break; -- cgit v1.2.1 From 40b7397579e006c0f9cf4de58e9ccc350e06308f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 11 Dec 2010 23:43:26 +0100 Subject: Platform / x86: Make fujitsu_laptop use acpi_bus_update_power() Use the new function acpi_bus_update_power(), which is safer than acpi_bus_get_power(), for getting device power state in acpi_fujitsu_add() and acpi_fujitsu_hotkey_add(). Signed-off-by: Rafael J. Wysocki Reported-and-Tested-by: Sedat Dilek Signed-off-by: Len Brown --- drivers/platform/x86/fujitsu-laptop.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index f44cd2620ff9..cf6c47250c56 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -689,7 +689,7 @@ static int acpi_fujitsu_add(struct acpi_device *device) if (error) goto err_free_input_dev; - result = acpi_bus_get_power(fujitsu->acpi_handle, &state); + result = acpi_bus_update_power(fujitsu->acpi_handle, &state); if (result) { printk(KERN_ERR "Error reading power state\n"); goto err_unregister_input_dev; @@ -857,7 +857,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) if (error) goto err_free_input_dev; - result = acpi_bus_get_power(fujitsu_hotkey->acpi_handle, &state); + result = acpi_bus_update_power(fujitsu_hotkey->acpi_handle, &state); if (result) { printk(KERN_ERR "Error reading power state\n"); goto err_unregister_input_dev; -- cgit v1.2.1 From f6767dcf2a4f6e62960912d0affec1e15a246191 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 11 Dec 2010 23:44:39 +0100 Subject: ACPI / PM: Drop acpi_bus_get_power() There are no more users of acpi_bus_get_power(), so it can be dropped. Moreover, it should be dropped, because it modifies the device->power.state field of an ACPI device without updating the reference counters of the device's power resources, which is wrong. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/bus.c | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 2ee83b5fff97..0baa5f97734a 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -236,25 +236,6 @@ static int __acpi_bus_get_power(struct acpi_device *device, int *state) } -int acpi_bus_get_power(acpi_handle handle, int *state) -{ - struct acpi_device *device; - int result; - - result = acpi_bus_get_device(handle, &device); - if (result) - return result; - - result = __acpi_bus_get_power(device, state); - if (result) - return result; - - device->power.state = *state; - return 0; -} -EXPORT_SYMBOL(acpi_bus_get_power); - - static int __acpi_bus_set_power(struct acpi_device *device, int state) { int result = 0; -- cgit v1.2.1 From 53eac700b0df1fef8c957b9eedfd7f48120425e3 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 11 Dec 2010 23:45:30 +0100 Subject: ACPI / PM: Drop acpi_power_nocheck Since acpi_bus_set_power() should not use __acpi_bus_get_power() to update the device's device->power.state field before changing its power state (this may cause device->power.state to be inconsistent with the device power resources' reference counters), remove this call from it. In consequence, the acpi_power_nocheck variable is not necessary any more, so it can be dropped along with the DMI table used for setting that variable for HP Pavilion 05. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/bus.c | 39 --------------------------------------- drivers/acpi/internal.h | 1 - drivers/acpi/power.c | 3 --- 3 files changed, 43 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 0baa5f97734a..7ced61f39492 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -52,22 +52,6 @@ EXPORT_SYMBOL(acpi_root_dir); #define STRUCT_TO_INT(s) (*((int*)&s)) -static int set_power_nocheck(const struct dmi_system_id *id) -{ - printk(KERN_NOTICE PREFIX "%s detected - " - "disable power check in power transition\n", id->ident); - acpi_power_nocheck = 1; - return 0; -} -static struct dmi_system_id __cpuinitdata power_nocheck_dmi_table[] = { - { - set_power_nocheck, "HP Pavilion 05", { - DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_SYS_VENDOR, "HP Pavilion 05"), - DMI_MATCH(DMI_PRODUCT_VERSION, "2001211RE101GLEND") }, NULL}, - {}, -}; - #ifdef CONFIG_X86 static int set_copy_dsdt(const struct dmi_system_id *id) @@ -333,23 +317,6 @@ int acpi_bus_set_power(acpi_handle handle, int state) return -ENODEV; } - /* - * Get device's current power state - */ - if (!acpi_power_nocheck) { - /* - * Maybe the incorrect power state is returned on the bogus - * bios, which is different with the real power state. - * For example: the bios returns D0 state and the real power - * state is D3. OS expects to set the device to D0 state. In - * such case if OS uses the power state returned by the BIOS, - * the device can't be transisted to the correct power state. - * So if the acpi_power_nocheck is set, it is unnecessary to - * get the power state by calling acpi_bus_get_power. - */ - __acpi_bus_get_power(device, &device->power.state); - } - return __acpi_bus_set_power(device, state); } EXPORT_SYMBOL(acpi_bus_set_power); @@ -1072,12 +1039,6 @@ static int __init acpi_init(void) if (acpi_disabled) return result; - /* - * If the laptop falls into the DMI check table, the power state check - * will be disabled in the course of device power transition. - */ - dmi_check_system(power_nocheck_dmi_table); - acpi_scan_init(); acpi_ec_init(); acpi_debugfs_init(); diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 7493e6c7a003..8df5d7061a45 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -45,7 +45,6 @@ int acpi_power_get_inferred_state(struct acpi_device *device, int *state); int acpi_power_on_resources(struct acpi_device *device, int state); int acpi_power_transition(struct acpi_device *device, int state); int acpi_bus_init_power(struct acpi_device *device); -extern int acpi_power_nocheck; int acpi_wakeup_device_init(void); void acpi_early_processor_set_pdc(void); diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 0cb4eab50d73..0003f1009885 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -56,9 +56,6 @@ ACPI_MODULE_NAME("power"); #define ACPI_POWER_RESOURCE_STATE_ON 0x01 #define ACPI_POWER_RESOURCE_STATE_UNKNOWN 0xFF -int acpi_power_nocheck; -module_param_named(power_nocheck, acpi_power_nocheck, bool, 000); - static int acpi_power_add(struct acpi_device *device); static int acpi_power_remove(struct acpi_device *device, int type); static int acpi_power_resume(struct acpi_device *device); -- cgit v1.2.1 From 36237fa0a711c309a38d7a7a9aed727e0eb76449 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 6 Jan 2011 23:38:04 +0100 Subject: ACPI / PM: Rename acpi_power_off_device() Rename acpi_power_off_device() to acpi_power_off() in analogy with acpi_power_on(). Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/power.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 0003f1009885..ac02af419b32 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -219,7 +219,7 @@ static int acpi_power_on(acpi_handle handle) return result; } -static int acpi_power_off_device(acpi_handle handle) +static int acpi_power_off(acpi_handle handle) { int result = 0; acpi_status status = AE_OK; @@ -268,7 +268,7 @@ static void __acpi_power_off_list(struct acpi_handle_list *list, int num_res) int i; for (i = num_res - 1; i >= 0 ; i--) - acpi_power_off_device(list->handles[i]); + acpi_power_off(list->handles[i]); } static void acpi_power_off_list(struct acpi_handle_list *list) @@ -430,8 +430,7 @@ int acpi_disable_wakeup_device_power(struct acpi_device *dev) /* Close power resource */ for (i = 0; i < dev->wakeup.resources.count; i++) { - int ret = acpi_power_off_device( - dev->wakeup.resources.handles[i]); + int ret = acpi_power_off(dev->wakeup.resources.handles[i]); if (ret) { printk(KERN_ERR PREFIX "Transition power state\n"); dev->wakeup.flags.valid = 0; -- cgit v1.2.1 From d0515d9fec68bace144fda57a69f4268fb875209 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 6 Jan 2011 23:38:57 +0100 Subject: ACPI / PM: Check status of power resources under mutexes It certainly is not a good idea to execute _ON or _OFF and _STA for the same power resource at the same time which may happen in some circumstances in theory. To prevent that from happening, read the power state of each power resource under its mutex, as that will prevent the state from being changed at the same time. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/power.c | 33 ++++++++++++++++++++------------- 1 file changed, 20 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index ac02af419b32..9ac2a9fa90ff 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -145,9 +145,8 @@ static int acpi_power_get_state(acpi_handle handle, int *state) static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state) { - int result = 0, state1; - u32 i = 0; - + int cur_state; + int i = 0; if (!list || !state) return -EINVAL; @@ -155,25 +154,33 @@ static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state) /* The state of the list is 'on' IFF all resources are 'on'. */ for (i = 0; i < list->count; i++) { - /* - * The state of the power resource can be obtained by - * using the ACPI handle. In such case it is unnecessary to - * get the Power resource first and then get its state again. - */ - result = acpi_power_get_state(list->handles[i], &state1); + struct acpi_power_resource *resource; + acpi_handle handle = list->handles[i]; + int result; + + result = acpi_power_get_context(handle, &resource); if (result) return result; - *state = state1; + mutex_lock(&resource->resource_lock); - if (*state != ACPI_POWER_RESOURCE_STATE_ON) + result = acpi_power_get_state(handle, &cur_state); + + mutex_unlock(&resource->resource_lock); + + if (result) + return result; + + if (cur_state != ACPI_POWER_RESOURCE_STATE_ON) break; } ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource list is %s\n", - *state ? "on" : "off")); + cur_state ? "on" : "off")); - return result; + *state = cur_state; + + return 0; } static int __acpi_power_on(struct acpi_power_resource *resource) -- cgit v1.2.1 From 86e4e20e8a5301ff7104a4f40f35fd5bee408186 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 6 Jan 2011 23:40:00 +0100 Subject: ACPI: Always check if _PRW is present before trying to evaluate it Before evaluating _PRW for devices that are reported as inactive or not present by their _STA control methods we should check if those methods are actually present (otherwise the evaulation of _PRW will obviously fail and a scary message will be printed unnecessarily). Reported-by: Andreas Mohr Reported-by: Maciej Rutecki Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/scan.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 64d4da0d6d52..b5e4dedb497d 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1388,7 +1388,6 @@ static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl, struct acpi_bus_ops *ops = context; int type; unsigned long long sta; - struct acpi_device_wakeup wakeup; struct acpi_device *device; acpi_status status; int result; @@ -1399,7 +1398,13 @@ static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl, if (!(sta & ACPI_STA_DEVICE_PRESENT) && !(sta & ACPI_STA_DEVICE_FUNCTIONING)) { - acpi_bus_extract_wakeup_device_power_package(handle, &wakeup); + struct acpi_device_wakeup wakeup; + acpi_handle temp; + + status = acpi_get_handle(handle, "_PRW", &temp); + if (ACPI_SUCCESS(status)) + acpi_bus_extract_wakeup_device_power_package(handle, + &wakeup); return AE_CTRL_DEPTH; } -- cgit v1.2.1 From d57d09a480e1db38eeee7629c81289b00f338a15 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 6 Jan 2011 23:41:27 +0100 Subject: ACPI: Drop device flag wake_capable The wake_capable ACPI device flag is not necessary, because it is only used in scan.c for recording the information that _PRW is present for the given device. That information is only used by acpi_add_single_object() to decide whether or not to call acpi_bus_get_wakeup_device_flags(), so the flag may be dropped if the _PRW check is moved to acpi_bus_get_wakeup_device_flags(). Moreover, acpi_bus_get_wakeup_device_flags() always returns 0, so it really should be void. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/scan.c | 26 +++++++++----------------- 1 file changed, 9 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index b5e4dedb497d..b99e62494607 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -815,16 +815,22 @@ static void acpi_bus_set_run_wake_flags(struct acpi_device *device) !!(event_status & ACPI_EVENT_FLAG_HANDLE); } -static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) +static void acpi_bus_get_wakeup_device_flags(struct acpi_device *device) { + acpi_handle temp; acpi_status status = 0; int psw_error; + /* Presence of _PRW indicates wake capable */ + status = acpi_get_handle(device->handle, "_PRW", &temp); + if (ACPI_FAILURE(status)) + return; + status = acpi_bus_extract_wakeup_device_power_package(device->handle, &device->wakeup); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Extracting _PRW package")); - goto end; + return; } device->wakeup.flags.valid = 1; @@ -840,11 +846,6 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) if (psw_error) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "error in _DSW or _PSW evaluation\n")); - -end: - if (ACPI_FAILURE(status)) - device->flags.wake_capable = 0; - return 0; } static void acpi_bus_add_power_resource(acpi_handle handle); @@ -950,11 +951,6 @@ static int acpi_bus_get_flags(struct acpi_device *device) if (ACPI_SUCCESS(status)) device->flags.power_manageable = 1; - /* Presence of _PRW indicates wake capable */ - status = acpi_get_handle(device->handle, "_PRW", &temp); - if (ACPI_SUCCESS(status)) - device->flags.wake_capable = 1; - /* TBD: Performance management */ return 0; @@ -1281,11 +1277,7 @@ static int acpi_add_single_object(struct acpi_device **child, * Wakeup device management *----------------------- */ - if (device->flags.wake_capable) { - result = acpi_bus_get_wakeup_device_flags(device); - if (result) - goto end; - } + acpi_bus_get_wakeup_device_flags(device); /* * Performance Management -- cgit v1.2.1 From da8aeb92d4853f37e281f11fddf61f9c7d84c3cd Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 6 Jan 2011 23:42:27 +0100 Subject: ACPI / Battery: Update information on info notification and resume A notification event 0x81 from an ACPI battery device requires us to re-read the battery information structure. Follow this requirement and remove and re-create the battery's attibutes in sysfs so that they reflect the reporting units used by the battery at the moment (those units may actually change sometimes at run time, which happens on some Thinkpads). The approach used in this patch was suggested by Matthew Garrett. Signed-off-by: Rafael J. Wysocki Reported-by: Matthew Garrett Signed-off-by: Len Brown --- drivers/acpi/battery.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 2a31421e0d75..68bc227e7c4c 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -631,6 +631,17 @@ static int acpi_battery_update(struct acpi_battery *battery) return result; } +static void acpi_battery_refresh(struct acpi_battery *battery) +{ + if (!battery->bat.dev) + return; + + acpi_battery_get_info(battery); + /* The battery may have changed its reporting units. */ + sysfs_remove_battery(battery); + sysfs_add_battery(battery); +} + /* -------------------------------------------------------------------------- FS Interface (/proc) -------------------------------------------------------------------------- */ @@ -916,6 +927,8 @@ static void acpi_battery_notify(struct acpi_device *device, u32 event) if (!battery) return; old = battery->bat.dev; + if (event == ACPI_BATTERY_NOTIFY_INFO) + acpi_battery_refresh(battery); acpi_battery_update(battery); acpi_bus_generate_proc_event(device, event, acpi_battery_present(battery)); @@ -985,6 +998,7 @@ static int acpi_battery_resume(struct acpi_device *device) if (!device) return -EINVAL; battery = acpi_driver_data(device); + acpi_battery_refresh(battery); battery->update_time = 0; acpi_battery_update(battery); return 0; -- cgit v1.2.1 From 9378b63ccb32b9c071dab155c96357ad1e52a709 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Wed, 12 Jan 2011 00:50:37 -0800 Subject: x86, ia64, acpi: Clean up x86-ism in drivers/acpi/numa.c As pointed out by Linus CONFIG_X86 in drivers/acpi/numa.c is ugly. Builds and boots on ia64 (both normally and with maxcpus=8 to limit the number of cpus). Signed-off-by: Tony Luck Acked-by: Yinghai Lu Cc: Linus Torvalds Cc: Wu Fengguang Cc: Bjorn Helgaas Cc: Len Brown LKML-Reference: <4D2D6B5D.4080208@kernel.org> Signed-off-by: Ingo Molnar --- drivers/acpi/numa.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index d9926afec110..5eb25eb3ea48 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -275,23 +275,19 @@ acpi_table_parse_srat(enum acpi_srat_type id, int __init acpi_numa_init(void) { int ret = 0; - int nr_cpu_entries = nr_cpu_ids; -#ifdef CONFIG_X86 /* * Should not limit number with cpu num that is from NR_CPUS or nr_cpus= * SRAT cpu entries could have different order with that in MADT. * So go over all cpu entries in SRAT to get apicid to node mapping. */ - nr_cpu_entries = MAX_LOCAL_APIC; -#endif /* SRAT: Static Resource Affinity Table */ if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) { acpi_table_parse_srat(ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY, - acpi_parse_x2apic_affinity, nr_cpu_entries); + acpi_parse_x2apic_affinity, 0); acpi_table_parse_srat(ACPI_SRAT_TYPE_CPU_AFFINITY, - acpi_parse_processor_affinity, nr_cpu_entries); + acpi_parse_processor_affinity, 0); ret = acpi_table_parse_srat(ACPI_SRAT_TYPE_MEMORY_AFFINITY, acpi_parse_memory_affinity, NR_NODE_MEMBLKS); -- cgit v1.2.1 From 00f28e4037c8d5782fa7a1b2666b0dca21522d69 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 11 Jan 2011 11:50:28 +0000 Subject: xen-platform: use PCI interfaces to request IO and MEM resources. This is the correct interface to use and something has broken the use of the previous incorrect interface (which fails because the request conflicts with the resources assigned for the PCI device itself instead of nesting like the PCI interfaces do). Signed-off-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk Cc: stable@kernel.org # 2.6.37 only --- drivers/xen/platform-pci.c | 21 +++++++-------------- 1 file changed, 7 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/platform-pci.c b/drivers/xen/platform-pci.c index c01b5ddce529..afbe041f42c5 100644 --- a/drivers/xen/platform-pci.c +++ b/drivers/xen/platform-pci.c @@ -105,7 +105,7 @@ static int __devinit platform_pci_init(struct pci_dev *pdev, const struct pci_device_id *ent) { int i, ret; - long ioaddr, iolen; + long ioaddr; long mmio_addr, mmio_len; unsigned int max_nr_gframes; @@ -114,7 +114,6 @@ static int __devinit platform_pci_init(struct pci_dev *pdev, return i; ioaddr = pci_resource_start(pdev, 0); - iolen = pci_resource_len(pdev, 0); mmio_addr = pci_resource_start(pdev, 1); mmio_len = pci_resource_len(pdev, 1); @@ -125,19 +124,13 @@ static int __devinit platform_pci_init(struct pci_dev *pdev, goto pci_out; } - if (request_mem_region(mmio_addr, mmio_len, DRV_NAME) == NULL) { - dev_err(&pdev->dev, "MEM I/O resource 0x%lx @ 0x%lx busy\n", - mmio_addr, mmio_len); - ret = -EBUSY; + ret = pci_request_region(pdev, 1, DRV_NAME); + if (ret < 0) goto pci_out; - } - if (request_region(ioaddr, iolen, DRV_NAME) == NULL) { - dev_err(&pdev->dev, "I/O resource 0x%lx @ 0x%lx busy\n", - iolen, ioaddr); - ret = -EBUSY; + ret = pci_request_region(pdev, 0, DRV_NAME); + if (ret < 0) goto mem_out; - } platform_mmio = mmio_addr; platform_mmiolen = mmio_len; @@ -169,9 +162,9 @@ static int __devinit platform_pci_init(struct pci_dev *pdev, return 0; out: - release_region(ioaddr, iolen); + pci_release_region(pdev, 0); mem_out: - release_mem_region(mmio_addr, mmio_len); + pci_release_region(pdev, 1); pci_out: pci_disable_device(pdev); return ret; -- cgit v1.2.1 From 7c8c06c5bb2dcc9fd0d2eeac4e9c10bf77ffed1a Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 11 Jan 2011 11:51:14 +0000 Subject: xen: rename platform-pci module to xen-platform-pci. platform-pci is rather generic for a modular distro style kernel. Signed-off-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index 533a199e7a3f..f81819b0f916 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -11,9 +11,10 @@ obj-$(CONFIG_XEN_BALLOON) += balloon.o obj-$(CONFIG_XEN_DEV_EVTCHN) += xen-evtchn.o obj-$(CONFIG_XENFS) += xenfs/ obj-$(CONFIG_XEN_SYS_HYPERVISOR) += sys-hypervisor.o -obj-$(CONFIG_XEN_PLATFORM_PCI) += platform-pci.o +obj-$(CONFIG_XEN_PLATFORM_PCI) += xen-platform-pci.o obj-$(CONFIG_SWIOTLB_XEN) += swiotlb-xen.o obj-$(CONFIG_XEN_DOM0) += pci.o xen-evtchn-y := evtchn.o +xen-platform-pci-y := platform-pci.o -- cgit v1.2.1 From 106d1a0ab2a354b97df3e232be7dedbfaf8e901d Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Mon, 20 Dec 2010 12:11:45 +0100 Subject: ACPI: fix resource check message printk("%pR",...) is for formatting struct resource only. But the list built up in drivers/acpi/osl.c uses it's own struct: struct acpi_res_list {} Without this patch you can see wrongly formatted resources (SMRG is of IO type): ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with AC PI region SMRG [mem 0x00000400-0x0000040f 64bit pref disabled] https://bugzilla.kernel.org/show_bug.cgi?id=26342 Signed-off-by: Thomas Renninger CC: Matthew Wilcox Signed-off-by: Len Brown --- drivers/acpi/osl.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 966feddf6b1b..6eaa13cdf767 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -1192,8 +1192,7 @@ __setup("acpi_enforce_resources=", acpi_enforce_resources_setup); int acpi_check_resource_conflict(const struct resource *res) { struct acpi_res_list *res_list_elem; - int ioport; - int clash = 0; + int ioport = 0, clash = 0; if (acpi_enforce_resources == ENFORCE_RESOURCES_NO) return 0; @@ -1223,9 +1222,13 @@ int acpi_check_resource_conflict(const struct resource *res) if (clash) { if (acpi_enforce_resources != ENFORCE_RESOURCES_NO) { printk(KERN_WARNING "ACPI: resource %s %pR" - " conflicts with ACPI region %s %pR\n", + " conflicts with ACPI region %s " + "[%s 0x%zx-0x%zx]\n", res->name, res, res_list_elem->name, - res_list_elem); + (res_list_elem->resource_type == + ACPI_ADR_SPACE_SYSTEM_IO) ? "io" : "mem", + (size_t) res_list_elem->start, + (size_t) res_list_elem->end); if (acpi_enforce_resources == ENFORCE_RESOURCES_LAX) printk(KERN_NOTICE "ACPI: This conflict may" " cause random problems and system" -- cgit v1.2.1 From c566d299f91bdb622046126dbcb040f9e52572ba Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 29 Dec 2010 19:12:01 +0000 Subject: olpc_battery: Ambient temperature is not available on XO-1.5 The XO-1.5 does not support the ambient temperature property. Create a separate list of properties for that configuration where ambient temperature is not included, and apply the correct property list at runtime. Signed-off-by: Daniel Drake Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 5bc1dcf7785e..0cd4f15e3013 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -331,7 +331,7 @@ static int olpc_bat_get_property(struct power_supply *psy, return ret; } -static enum power_supply_property olpc_bat_props[] = { +static enum power_supply_property olpc_xo1_bat_props[] = { POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_CHARGE_TYPE, POWER_SUPPLY_PROP_PRESENT, @@ -348,6 +348,23 @@ static enum power_supply_property olpc_bat_props[] = { POWER_SUPPLY_PROP_CHARGE_COUNTER, }; +/* XO-1.5 does not have ambient temperature property */ +static enum power_supply_property olpc_xo15_bat_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_CURRENT_AVG, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_MANUFACTURER, + POWER_SUPPLY_PROP_SERIAL_NUMBER, + POWER_SUPPLY_PROP_CHARGE_COUNTER, +}; + /* EEPROM reading goes completely around the power_supply API, sadly */ #define EEPROM_START 0x20 @@ -419,8 +436,6 @@ static struct device_attribute olpc_bat_error = { static struct platform_device *bat_pdev; static struct power_supply olpc_bat = { - .properties = olpc_bat_props, - .num_properties = ARRAY_SIZE(olpc_bat_props), .get_property = olpc_bat_get_property, .use_for_apm = 1, }; @@ -466,6 +481,13 @@ static int __init olpc_bat_init(void) goto ac_failed; olpc_bat.name = bat_pdev->name; + if (olpc_board_at_least(olpc_board_pre(0xd0))) { /* XO-1.5 */ + olpc_bat.properties = olpc_xo15_bat_props; + olpc_bat.num_properties = ARRAY_SIZE(olpc_xo15_bat_props); + } else { /* XO-1 */ + olpc_bat.properties = olpc_xo1_bat_props; + olpc_bat.num_properties = ARRAY_SIZE(olpc_xo1_bat_props); + } ret = power_supply_register(&bat_pdev->dev, &olpc_bat); if (ret) -- cgit v1.2.1 From b202a5e6c94d8c43ade5adb97e87734cc4f4f228 Mon Sep 17 00:00:00 2001 From: Sascha Silbe Date: Fri, 10 Dec 2010 23:05:19 +0100 Subject: olpc_battery: Add support for CHARGE_FULL_DESIGN Some user space software (read: UPower) uses CHARGE_FULL_DESIGN for internal calculations. The design capacity of the OLPC batteries is effectively fixed and only needs to be exported. Signed-off-by: Sascha Silbe Signed-off-by: Paul Fox Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 54 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) (limited to 'drivers') diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 0cd4f15e3013..663b73023eaf 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -201,6 +201,54 @@ static int olpc_bat_get_tech(union power_supply_propval *val) return ret; } +static int olpc_bat_get_charge_full_design(union power_supply_propval *val) +{ + uint8_t ec_byte; + union power_supply_propval tech; + int ret, mfr; + + ret = olpc_bat_get_tech(&tech); + if (ret) + return ret; + + ec_byte = BAT_ADDR_MFR_TYPE; + ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + if (ret) + return ret; + + mfr = ec_byte >> 4; + + switch (tech.intval) { + case POWER_SUPPLY_TECHNOLOGY_NiMH: + switch (mfr) { + case 1: /* Gold Peak */ + val->intval = 3000000*.8; + break; + default: + return -EIO; + } + break; + + case POWER_SUPPLY_TECHNOLOGY_LiFe: + switch (mfr) { + case 1: /* Gold Peak */ + val->intval = 2800000; + break; + case 2: /* BYD */ + val->intval = 3100000; + break; + default: + return -EIO; + } + break; + + default: + return -EIO; + } + + return ret; +} + /********************************************************************* * Battery properties *********************************************************************/ @@ -294,6 +342,11 @@ static int olpc_bat_get_property(struct power_supply *psy, else val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; break; + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + ret = olpc_bat_get_charge_full_design(val); + if (ret) + return ret; + break; case POWER_SUPPLY_PROP_TEMP: ret = olpc_ec_cmd(EC_BAT_TEMP, NULL, 0, (void *)&ec_word, 2); if (ret) @@ -341,6 +394,7 @@ static enum power_supply_property olpc_xo1_bat_props[] = { POWER_SUPPLY_PROP_CURRENT_AVG, POWER_SUPPLY_PROP_CAPACITY, POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TEMP_AMBIENT, POWER_SUPPLY_PROP_MANUFACTURER, -- cgit v1.2.1 From 20fd9830ccc685adce65ba89ffc3ca5426a2b064 Mon Sep 17 00:00:00 2001 From: Sascha Silbe Date: Fri, 10 Dec 2010 23:05:20 +0100 Subject: olpc_battery: Add support for CHARGE_NOW CHARGE_NOW is needed by some user space software (read: UPower) for internal calculations. This patch violates the power supply class definition (as we already do for CAPACITY though it isn't as obvious there), but this is the best we can do without adding rather sophisticated algorithms to either the EC or UPower. Signed-off-by: Sascha Silbe Signed-off-by: Paul Fox Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers') diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 663b73023eaf..0f7a7b11bda3 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -249,6 +249,24 @@ static int olpc_bat_get_charge_full_design(union power_supply_propval *val) return ret; } +static int olpc_bat_get_charge_now(union power_supply_propval *val) +{ + uint8_t soc; + union power_supply_propval full; + int ret; + + ret = olpc_ec_cmd(EC_BAT_SOC, NULL, 0, &soc, 1); + if (ret) + return ret; + + ret = olpc_bat_get_charge_full_design(&full); + if (ret) + return ret; + + val->intval = soc * (full.intval / 100); + return 0; +} + /********************************************************************* * Battery properties *********************************************************************/ @@ -347,6 +365,11 @@ static int olpc_bat_get_property(struct power_supply *psy, if (ret) return ret; break; + case POWER_SUPPLY_PROP_CHARGE_NOW: + ret = olpc_bat_get_charge_now(val); + if (ret) + return ret; + break; case POWER_SUPPLY_PROP_TEMP: ret = olpc_ec_cmd(EC_BAT_TEMP, NULL, 0, (void *)&ec_word, 2); if (ret) @@ -395,6 +418,7 @@ static enum power_supply_property olpc_xo1_bat_props[] = { POWER_SUPPLY_PROP_CAPACITY, POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CHARGE_NOW, POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TEMP_AMBIENT, POWER_SUPPLY_PROP_MANUFACTURER, -- cgit v1.2.1 From 22fadd766b2a222b273df9f2264b72e4b3bbe921 Mon Sep 17 00:00:00 2001 From: Sascha Silbe Date: Fri, 10 Dec 2010 23:05:21 +0100 Subject: olpc_battery: Add support for CURRENT_NOW and VOLTAGE_NOW {CURRENT,VOLTAGE}_AVG are actually {CURRENT,VOLTAGE}_NOW (the EC code directly passes through the value from the gas gauge instead of the internally used average). We retain {CURRENT,VOLTAGE}_AVG as an alias for compatibility reasons, it will be removed later. Signed-off-by: Sascha Silbe [ pgf@laptop.org: added VOLTAGE_NOW, aliased to VOLTAGE_AVG ] Signed-off-by: Paul Fox Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 0f7a7b11bda3..64e40ff5c44a 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -333,6 +333,7 @@ static int olpc_bat_get_property(struct power_supply *psy, return ret; break; case POWER_SUPPLY_PROP_VOLTAGE_AVG: + case POWER_SUPPLY_PROP_VOLTAGE_NOW: ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2); if (ret) return ret; @@ -340,6 +341,7 @@ static int olpc_bat_get_property(struct power_supply *psy, val->intval = (s16)be16_to_cpu(ec_word) * 9760L / 32; break; case POWER_SUPPLY_PROP_CURRENT_AVG: + case POWER_SUPPLY_PROP_CURRENT_NOW: ret = olpc_ec_cmd(EC_BAT_CURRENT, NULL, 0, (void *)&ec_word, 2); if (ret) return ret; @@ -414,7 +416,9 @@ static enum power_supply_property olpc_xo1_bat_props[] = { POWER_SUPPLY_PROP_HEALTH, POWER_SUPPLY_PROP_TECHNOLOGY, POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_VOLTAGE_NOW, POWER_SUPPLY_PROP_CURRENT_AVG, + POWER_SUPPLY_PROP_CURRENT_NOW, POWER_SUPPLY_PROP_CAPACITY, POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, -- cgit v1.2.1 From ddbd550d503c9cdefcd6674a0ef168d57d3f0917 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Mon, 13 Dec 2010 18:28:22 -0500 Subject: intel_idle: update Sandy Bridge core C-state residency targets Signed-off-by: Len Brown --- drivers/idle/intel_idle.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index c131d58bcb50..94a652625ae2 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -122,7 +122,7 @@ static struct cpuidle_state snb_cstates[MWAIT_MAX_NUM_CSTATES] = { .driver_data = (void *) 0x00, .flags = CPUIDLE_FLAG_TIME_VALID, .exit_latency = 1, - .target_residency = 4, + .target_residency = 1, .enter = &intel_idle }, { /* MWAIT C2 */ .name = "SNB-C3", @@ -130,7 +130,7 @@ static struct cpuidle_state snb_cstates[MWAIT_MAX_NUM_CSTATES] = { .driver_data = (void *) 0x10, .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 80, - .target_residency = 160, + .target_residency = 211, .enter = &intel_idle }, { /* MWAIT C3 */ .name = "SNB-C6", @@ -138,7 +138,7 @@ static struct cpuidle_state snb_cstates[MWAIT_MAX_NUM_CSTATES] = { .driver_data = (void *) 0x20, .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 104, - .target_residency = 208, + .target_residency = 345, .enter = &intel_idle }, { /* MWAIT C4 */ .name = "SNB-C7", @@ -146,7 +146,7 @@ static struct cpuidle_state snb_cstates[MWAIT_MAX_NUM_CSTATES] = { .driver_data = (void *) 0x30, .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, .exit_latency = 109, - .target_residency = 300, + .target_residency = 345, .enter = &intel_idle }, }; -- cgit v1.2.1 From d8c216cfa57e8a579f41729cbb88c97835d9ac8d Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 8 Jan 2011 00:29:20 +0100 Subject: cpuidle: Make cpuidle_enable_device() call poll_idle_init() The following scenario is possible with the current cpuidle code and the ACPI cpuidle driver: (1) acpi_processor_cst_has_changed() is called, (2) cpuidle_disable_device() is called, (3) cpuidle_remove_state_sysfs() is called to remove the (presumably outdated) states info from sysfs, (3) acpi_processor_get_power_info() is called, the first entry in the pr->power.states[] table is filled with zeros, (4) acpi_processor_setup_cpuidle() is called and it doesn't fill the first entry in pr->power.states[], (5) cpuidle_enable_device() is called, (6) __cpuidle_register_device() is _not_ called, since the device has already been registered, (7) Consequently, poll_idle_init() is _not_ called either, (8) cpuidle_add_state_sysfs() is called to create the sysfs attributes for the new states and it uses the bogus first table entry from acpi_processor_get_power_info() for creating state0. This problem is avoided if cpuidle_enable_device() unconditionally calls poll_idle_init(). Reported-by: Len Brown Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown cc: stable@kernel.org --- drivers/cpuidle/cpuidle.c | 82 +++++++++++++++++++++++------------------------ 1 file changed, 41 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index a50710843378..97df791c74cb 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -154,6 +154,45 @@ void cpuidle_resume_and_unlock(void) EXPORT_SYMBOL_GPL(cpuidle_resume_and_unlock); +#ifdef CONFIG_ARCH_HAS_CPU_RELAX +static int poll_idle(struct cpuidle_device *dev, struct cpuidle_state *st) +{ + ktime_t t1, t2; + s64 diff; + int ret; + + t1 = ktime_get(); + local_irq_enable(); + while (!need_resched()) + cpu_relax(); + + t2 = ktime_get(); + diff = ktime_to_us(ktime_sub(t2, t1)); + if (diff > INT_MAX) + diff = INT_MAX; + + ret = (int) diff; + return ret; +} + +static void poll_idle_init(struct cpuidle_device *dev) +{ + struct cpuidle_state *state = &dev->states[0]; + + cpuidle_set_statedata(state, NULL); + + snprintf(state->name, CPUIDLE_NAME_LEN, "C0"); + snprintf(state->desc, CPUIDLE_DESC_LEN, "CPUIDLE CORE POLL IDLE"); + state->exit_latency = 0; + state->target_residency = 0; + state->power_usage = -1; + state->flags = CPUIDLE_FLAG_POLL; + state->enter = poll_idle; +} +#else +static void poll_idle_init(struct cpuidle_device *dev) {} +#endif /* CONFIG_ARCH_HAS_CPU_RELAX */ + /** * cpuidle_enable_device - enables idle PM for a CPU * @dev: the CPU @@ -178,6 +217,8 @@ int cpuidle_enable_device(struct cpuidle_device *dev) return ret; } + poll_idle_init(dev); + if ((ret = cpuidle_add_state_sysfs(dev))) return ret; @@ -232,45 +273,6 @@ void cpuidle_disable_device(struct cpuidle_device *dev) EXPORT_SYMBOL_GPL(cpuidle_disable_device); -#ifdef CONFIG_ARCH_HAS_CPU_RELAX -static int poll_idle(struct cpuidle_device *dev, struct cpuidle_state *st) -{ - ktime_t t1, t2; - s64 diff; - int ret; - - t1 = ktime_get(); - local_irq_enable(); - while (!need_resched()) - cpu_relax(); - - t2 = ktime_get(); - diff = ktime_to_us(ktime_sub(t2, t1)); - if (diff > INT_MAX) - diff = INT_MAX; - - ret = (int) diff; - return ret; -} - -static void poll_idle_init(struct cpuidle_device *dev) -{ - struct cpuidle_state *state = &dev->states[0]; - - cpuidle_set_statedata(state, NULL); - - snprintf(state->name, CPUIDLE_NAME_LEN, "C0"); - snprintf(state->desc, CPUIDLE_DESC_LEN, "CPUIDLE CORE POLL IDLE"); - state->exit_latency = 0; - state->target_residency = 0; - state->power_usage = -1; - state->flags = CPUIDLE_FLAG_POLL; - state->enter = poll_idle; -} -#else -static void poll_idle_init(struct cpuidle_device *dev) {} -#endif /* CONFIG_ARCH_HAS_CPU_RELAX */ - /** * __cpuidle_register_device - internal register function called before register * and enable routines @@ -291,8 +293,6 @@ static int __cpuidle_register_device(struct cpuidle_device *dev) init_completion(&dev->kobj_unregister); - poll_idle_init(dev); - /* * cpuidle driver should set the dev->power_specified bit * before registering the device if the driver provides -- cgit v1.2.1 From d18960494f65ca4fa0d67c865aaca99452070d15 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Wed, 3 Nov 2010 17:06:14 +0100 Subject: ACPI, intel_idle: Cleanup idle= internal variables Having four variables for the same thing: idle_halt, idle_nomwait, force_mwait and boot_option_idle_overrides is rather confusing and unnecessary complex. if idle= boot param is passed, only set up one variable: boot_option_idle_overrides Introduces following functional changes/fixes: - intel_idle driver does not register if any idle=xy boot param is passed. - processor_idle.c will also not register a cpuidle driver and get active if idle=halt is passed. Before a cpuidle driver with one (C1, halt) state got registered Now the default_idle function will be used which finally uses the same idle call to enter sleep state (safe_halt()), but without registering a whole cpuidle driver. That means idle= param will always avoid cpuidle drivers to register with one exception (same behavior as before): idle=nomwait may still register acpi_idle cpuidle driver, but C1 will not use mwait, but hlt. This can be a workaround for IO based deeper sleep states where C1 mwait causes problems. Signed-off-by: Thomas Renninger cc: x86@kernel.org Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 4 ++-- drivers/acpi/processor_idle.c | 24 +++++++++++------------- drivers/idle/intel_idle.c | 4 ++++ 3 files changed, 17 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index bec561c14beb..3c1a2fec8cda 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -23,7 +23,7 @@ static int set_no_mwait(const struct dmi_system_id *id) { printk(KERN_NOTICE PREFIX "%s detected - " "disabling mwait for CPU C-states\n", id->ident); - idle_nomwait = 1; + boot_option_idle_override = IDLE_NOMWAIT; return 0; } @@ -283,7 +283,7 @@ acpi_processor_eval_pdc(acpi_handle handle, struct acpi_object_list *pdc_in) { acpi_status status = AE_OK; - if (idle_nomwait) { + if (boot_option_idle_override == IDLE_NOMWAIT) { /* * If mwait is disabled for CPU C-states, the C2C3_FFH access * mode will be disabled in the parameter of _PDC object. diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index dcb38f8ddfda..eefd4aa0e71d 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -79,6 +79,13 @@ module_param(bm_check_disable, uint, 0000); static unsigned int latency_factor __read_mostly = 2; module_param(latency_factor, uint, 0644); +static int disabled_by_idle_boot_param(void) +{ + return boot_option_idle_override == IDLE_POLL || + boot_option_idle_override == IDLE_FORCE_MWAIT || + boot_option_idle_override == IDLE_HALT; +} + /* * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3. * For now disable this. Probably a bug somewhere else. @@ -455,7 +462,7 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) continue; } if (cx.type == ACPI_STATE_C1 && - (idle_halt || idle_nomwait)) { + (boot_option_idle_override == IDLE_NOMWAIT)) { /* * In most cases the C1 space_id obtained from * _CST object is FIXED_HARDWARE access mode. @@ -1058,7 +1065,7 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) { int ret = 0; - if (boot_option_idle_override) + if (disabled_by_idle_boot_param()) return 0; if (!pr) @@ -1089,19 +1096,10 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, acpi_status status = 0; static int first_run; - if (boot_option_idle_override) + if (disabled_by_idle_boot_param()) return 0; if (!first_run) { - if (idle_halt) { - /* - * When the boot option of "idle=halt" is added, halt - * is used for CPU IDLE. - * In such case C2/C3 is meaningless. So the max_cstate - * is set to one. - */ - max_cstate = 1; - } dmi_check_system(processor_power_dmi_table); max_cstate = acpi_processor_cstate_check(max_cstate); if (max_cstate < ACPI_C_STATES_MAX) @@ -1142,7 +1140,7 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, int acpi_processor_power_exit(struct acpi_processor *pr, struct acpi_device *device) { - if (boot_option_idle_override) + if (disabled_by_idle_boot_param()) return 0; cpuidle_unregister_device(&pr->power.dev); diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 94a652625ae2..21d387132dbc 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -404,6 +404,10 @@ static int __init intel_idle_init(void) { int retval; + /* Do not load intel_idle at all for now if idle= is passed */ + if (boot_option_idle_override != IDLE_NO_OVERRIDE) + return -ENODEV; + retval = intel_idle_probe(); if (retval) return retval; -- cgit v1.2.1 From 720f1c3010db6a411358b962a2007969117840bc Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 7 Jan 2011 11:29:43 +0100 Subject: cpuidle: Rename X86 specific idle poll state[0] from C0 to POLL C0 means and is well know as "not idle". All documentation out there uses this term as "running"/"not idle" state. Also Linux userspace tools (e.g. cpufreq-aperf and turbostat) show C0 residency which there is correct, but means something totally else than cpuidle "POLL" state. Signed-off-by: Thomas Renninger Signed-off-by: Len Brown --- drivers/cpuidle/cpuidle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 97df791c74cb..37e446041306 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -181,7 +181,7 @@ static void poll_idle_init(struct cpuidle_device *dev) cpuidle_set_statedata(state, NULL); - snprintf(state->name, CPUIDLE_NAME_LEN, "C0"); + snprintf(state->name, CPUIDLE_NAME_LEN, "POLL"); snprintf(state->desc, CPUIDLE_DESC_LEN, "CPUIDLE CORE POLL IDLE"); state->exit_latency = 0; state->target_residency = 0; -- cgit v1.2.1 From 0aae9f923bcc476a8e4725dd3ac37547b9816ee5 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 12 Jan 2011 02:22:56 -0500 Subject: ACPI: processor_idle: delete use of NOP CPUIDLE_FLAGs CPUIDLE_FLAG_SHALLOW CPUIDLE_FLAG_BALANCED CPUIDLE_FLAG_DEEP CPUIDLE_FLAG_CHECK_BM were set by acpi_processor_setup_cpuidle(), but never used by cpuidle or by acpi_idle. So stop setting them. Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index eefd4aa0e71d..70599d2ada61 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -1023,7 +1023,6 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) state->flags = 0; switch (cx->type) { case ACPI_STATE_C1: - state->flags |= CPUIDLE_FLAG_SHALLOW; if (cx->entry_method == ACPI_CSTATE_FFH) state->flags |= CPUIDLE_FLAG_TIME_VALID; @@ -1032,16 +1031,13 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) break; case ACPI_STATE_C2: - state->flags |= CPUIDLE_FLAG_BALANCED; state->flags |= CPUIDLE_FLAG_TIME_VALID; state->enter = acpi_idle_enter_simple; dev->safe_state = state; break; case ACPI_STATE_C3: - state->flags |= CPUIDLE_FLAG_DEEP; state->flags |= CPUIDLE_FLAG_TIME_VALID; - state->flags |= CPUIDLE_FLAG_CHECK_BM; state->enter = pr->flags.bm_check ? acpi_idle_enter_bm : acpi_idle_enter_simple; -- cgit v1.2.1 From d247632c08c674864d438733280422ddb7130ff8 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 12 Jan 2011 02:34:59 -0500 Subject: cpuidle: delete NOP CPUIDLE_FLAG_POLL it serves no purpose Signed-off-by: Len Brown --- drivers/cpuidle/cpuidle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 37e446041306..dd5f1eafd6f2 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -186,7 +186,7 @@ static void poll_idle_init(struct cpuidle_device *dev) state->exit_latency = 0; state->target_residency = 0; state->power_usage = -1; - state->flags = CPUIDLE_FLAG_POLL; + state->flags = 0; state->enter = poll_idle; } #else -- cgit v1.2.1 From 956d033fb2eb3f8818260cdf01644bf4dc1a9e33 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 12 Jan 2011 02:51:20 -0500 Subject: cpuidle: CPUIDLE_FLAG_TLB_FLUSHED is specific to intel_idle Signed-off-by: Len Brown --- drivers/idle/intel_idle.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 21d387132dbc..8256309deaad 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -81,6 +81,14 @@ static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state); static struct cpuidle_state *cpuidle_state_table; +/* + * Set this flag for states where the HW flushes the TLB for us + * and so we don't need cross-calls to keep it consistent. + * If this flag is set, SW flushes the TLB, so even if the + * HW doesn't do the flushing, this flag is safe to use. + */ +#define CPUIDLE_FLAG_TLB_FLUSHED 0x10000 + /* * States are indexed by the cstate number, * which is also the index into the MWAIT hint array. -- cgit v1.2.1 From 2a2d31c8dc6f1ebcf5eab1d93a0cb0fb4ed57c7c Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 10 Jan 2011 09:38:12 +0800 Subject: intel_idle: open broadcast clock event Intel_idle driver uses CLOCK_EVT_NOTIFY_BROADCAST_ENTER CLOCK_EVT_NOTIFY_BROADCAST_EXIT for broadcast clock events. The _ENTER/_EXIT doesn't really open broadcast clock events, please see processor_idle.c for an example. In some situation, this will cause boot hang, because some CPUs enters idle but local APIC timer stalls. Reported-and-tested-by: Yan Zheng Signed-off-by: Shaohua Li cc: stable@kernel.org Signed-off-by: Len Brown --- drivers/idle/intel_idle.c | 47 ++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 46 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 8256309deaad..fc393586cc70 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -59,6 +59,8 @@ #include /* ktime_get_real() */ #include #include +#include +#include #include #define INTEL_IDLE_VERSION "0.4" @@ -73,6 +75,7 @@ static int max_cstate = MWAIT_MAX_NUM_CSTATES - 1; static unsigned int mwait_substates; +#define LAPIC_TIMER_ALWAYS_RELIABLE 0xFFFFFFFF /* Reliable LAPIC Timer States, bit 1 for C1 etc. */ static unsigned int lapic_timer_reliable_states = (1 << 1); /* Default to only C1 */ @@ -252,6 +255,39 @@ static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state) return usec_delta; } +static void __setup_broadcast_timer(void *arg) +{ + unsigned long reason = (unsigned long)arg; + int cpu = smp_processor_id(); + + reason = reason ? + CLOCK_EVT_NOTIFY_BROADCAST_ON : CLOCK_EVT_NOTIFY_BROADCAST_OFF; + + clockevents_notify(reason, &cpu); +} + +static int __cpuinit setup_broadcast_cpuhp_notify(struct notifier_block *n, + unsigned long action, void *hcpu) +{ + int hotcpu = (unsigned long)hcpu; + + switch (action & 0xf) { + case CPU_ONLINE: + smp_call_function_single(hotcpu, __setup_broadcast_timer, + (void *)true, 1); + break; + case CPU_DOWN_PREPARE: + smp_call_function_single(hotcpu, __setup_broadcast_timer, + (void *)false, 1); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata setup_broadcast_notifier = { + .notifier_call = setup_broadcast_cpuhp_notify, +}; + /* * intel_idle_probe() */ @@ -314,7 +350,11 @@ static int intel_idle_probe(void) } if (boot_cpu_has(X86_FEATURE_ARAT)) /* Always Reliable APIC Timer */ - lapic_timer_reliable_states = 0xFFFFFFFF; + lapic_timer_reliable_states = LAPIC_TIMER_ALWAYS_RELIABLE; + else { + smp_call_function(__setup_broadcast_timer, (void *)true, 1); + register_cpu_notifier(&setup_broadcast_notifier); + } pr_debug(PREFIX "v" INTEL_IDLE_VERSION " model 0x%X\n", boot_cpu_data.x86_model); @@ -441,6 +481,11 @@ static void __exit intel_idle_exit(void) intel_idle_cpuidle_devices_uninit(); cpuidle_unregister_driver(&intel_idle_driver); + if (lapic_timer_reliable_states != LAPIC_TIMER_ALWAYS_RELIABLE) { + smp_call_function(__setup_broadcast_timer, (void *)false, 1); + unregister_cpu_notifier(&setup_broadcast_notifier); + } + return; } -- cgit v1.2.1 From 4979d18fe105297f8f065743f31f8f735da8df2d Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 12 Jan 2011 09:50:36 -0800 Subject: mlx4_{core, ib, en}: Fix driver when sizeof (phys_addr_t) > sizeof (long) Some systems have PCI addresses that don't fit in unsigned long (eg some 32-bit PowerPC 440 systems have 36-bit bus addresses). Fix up mlx4 drivers by using phys_addr_t where appropriate, so we don't truncate any PCI resource addresses before ioremapping them. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/main.c | 3 ++- drivers/net/mlx4/catas.c | 6 +++--- drivers/net/mlx4/en_main.c | 3 ++- drivers/net/mlx4/main.c | 2 +- 4 files changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 4c85224aeaa7..d68d849ab866 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -1005,7 +1005,8 @@ static void *mlx4_ib_add(struct mlx4_dev *dev) if (mlx4_uar_alloc(dev, &ibdev->priv_uar)) goto err_pd; - ibdev->uar_map = ioremap(ibdev->priv_uar.pfn << PAGE_SHIFT, PAGE_SIZE); + ibdev->uar_map = ioremap((phys_addr_t) ibdev->priv_uar.pfn << PAGE_SHIFT, + PAGE_SIZE); if (!ibdev->uar_map) goto err_uar; MLX4_INIT_DOORBELL_LOCK(&ibdev->uar_lock); diff --git a/drivers/net/mlx4/catas.c b/drivers/net/mlx4/catas.c index 68aaa42d0ced..32f947154c33 100644 --- a/drivers/net/mlx4/catas.c +++ b/drivers/net/mlx4/catas.c @@ -113,7 +113,7 @@ static void catas_reset(struct work_struct *work) void mlx4_start_catas_poll(struct mlx4_dev *dev) { struct mlx4_priv *priv = mlx4_priv(dev); - unsigned long addr; + phys_addr_t addr; INIT_LIST_HEAD(&priv->catas_err.list); init_timer(&priv->catas_err.timer); @@ -124,8 +124,8 @@ void mlx4_start_catas_poll(struct mlx4_dev *dev) priv->catas_err.map = ioremap(addr, priv->fw.catas_size * 4); if (!priv->catas_err.map) { - mlx4_warn(dev, "Failed to map internal error buffer at 0x%lx\n", - addr); + mlx4_warn(dev, "Failed to map internal error buffer at 0x%llx\n", + (unsigned long long) addr); return; } diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c index f6e0d40cd876..1ff6ca6466ed 100644 --- a/drivers/net/mlx4/en_main.c +++ b/drivers/net/mlx4/en_main.c @@ -202,7 +202,8 @@ static void *mlx4_en_add(struct mlx4_dev *dev) if (mlx4_uar_alloc(dev, &mdev->priv_uar)) goto err_pd; - mdev->uar_map = ioremap(mdev->priv_uar.pfn << PAGE_SHIFT, PAGE_SIZE); + mdev->uar_map = ioremap((phys_addr_t) mdev->priv_uar.pfn << PAGE_SHIFT, + PAGE_SIZE); if (!mdev->uar_map) goto err_uar; spin_lock_init(&mdev->uar_lock); diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 782f11d8fa71..4ffdc18fcb8a 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -829,7 +829,7 @@ static int mlx4_setup_hca(struct mlx4_dev *dev) goto err_uar_table_free; } - priv->kar = ioremap(priv->driver_uar.pfn << PAGE_SHIFT, PAGE_SIZE); + priv->kar = ioremap((phys_addr_t) priv->driver_uar.pfn << PAGE_SHIFT, PAGE_SIZE); if (!priv->kar) { mlx4_err(dev, "Couldn't map kernel access region, " "aborting.\n"); -- cgit v1.2.1 From e528db5b392ab2a624258a667fed0e65af6e411b Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 12 Jan 2011 12:58:06 -0500 Subject: xen-platform: Fix compile errors if CONFIG_PCI is not enabled. drivers/xen/platform-pci.c:127: error: implicit declaration of function 'pci_request_region' drivers/xen/platform-pci.c:165: error: implicit declaration of function 'pci_release_region' Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index 6e6180ccd726..6f52b3189803 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -64,7 +64,7 @@ config XEN_SYS_HYPERVISOR config XEN_PLATFORM_PCI tristate "xen platform pci device driver" - depends on XEN_PVHVM + depends on XEN_PVHVM && PCI default m help Driver for the Xen PCI Platform device: it is responsible for -- cgit v1.2.1 From 948579cd8c6ea7c8c98c52b79f4470952e182ebd Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 5 Nov 2010 03:07:36 +0000 Subject: RDMA: Use vzalloc() to replace vmalloc()+memset(0) Signed-off-by: Joe Perches Signed-off-by: Roland Dreier --- drivers/infiniband/hw/amso1100/c2_rnic.c | 5 ++--- drivers/infiniband/hw/ehca/ipz_pt_fn.c | 5 ++--- drivers/infiniband/hw/ipath/ipath_driver.c | 3 +-- drivers/infiniband/hw/ipath/ipath_file_ops.c | 11 +++-------- drivers/infiniband/hw/ipath/ipath_init_chip.c | 5 +---- drivers/infiniband/hw/qib/qib_init.c | 7 ++----- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 10 +++------- drivers/infiniband/ulp/ipoib/ipoib_main.c | 3 +-- 8 files changed, 15 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/amso1100/c2_rnic.c b/drivers/infiniband/hw/amso1100/c2_rnic.c index 85cfae4cad71..8c81992fa6db 100644 --- a/drivers/infiniband/hw/amso1100/c2_rnic.c +++ b/drivers/infiniband/hw/amso1100/c2_rnic.c @@ -459,13 +459,12 @@ int __devinit c2_rnic_init(struct c2_dev *c2dev) IB_DEVICE_MEM_WINDOW); /* Allocate the qptr_array */ - c2dev->qptr_array = vmalloc(C2_MAX_CQS * sizeof(void *)); + c2dev->qptr_array = vzalloc(C2_MAX_CQS * sizeof(void *)); if (!c2dev->qptr_array) { return -ENOMEM; } - /* Inialize the qptr_array */ - memset(c2dev->qptr_array, 0, C2_MAX_CQS * sizeof(void *)); + /* Initialize the qptr_array */ c2dev->qptr_array[0] = (void *) &c2dev->req_vq; c2dev->qptr_array[1] = (void *) &c2dev->rep_vq; c2dev->qptr_array[2] = (void *) &c2dev->aeq; diff --git a/drivers/infiniband/hw/ehca/ipz_pt_fn.c b/drivers/infiniband/hw/ehca/ipz_pt_fn.c index 1596e3085344..1898d6e7cce5 100644 --- a/drivers/infiniband/hw/ehca/ipz_pt_fn.c +++ b/drivers/infiniband/hw/ehca/ipz_pt_fn.c @@ -222,15 +222,14 @@ int ipz_queue_ctor(struct ehca_pd *pd, struct ipz_queue *queue, queue->small_page = NULL; /* allocate queue page pointers */ - queue->queue_pages = kmalloc(nr_of_pages * sizeof(void *), GFP_KERNEL); + queue->queue_pages = kzalloc(nr_of_pages * sizeof(void *), GFP_KERNEL); if (!queue->queue_pages) { - queue->queue_pages = vmalloc(nr_of_pages * sizeof(void *)); + queue->queue_pages = vzalloc(nr_of_pages * sizeof(void *)); if (!queue->queue_pages) { ehca_gen_err("Couldn't allocate queue page list"); return 0; } } - memset(queue->queue_pages, 0, nr_of_pages * sizeof(void *)); /* allocate actual queue pages */ if (is_small) { diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index b33f0457a1ff..ae92da2d3f56 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -199,12 +199,11 @@ static struct ipath_devdata *ipath_alloc_devdata(struct pci_dev *pdev) goto bail; } - dd = vmalloc(sizeof(*dd)); + dd = vzalloc(sizeof(*dd)); if (!dd) { dd = ERR_PTR(-ENOMEM); goto bail; } - memset(dd, 0, sizeof(*dd)); dd->ipath_unit = -1; spin_lock_irqsave(&ipath_devs_lock, flags); diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c index 9292a15ad7c4..6d4b29c4cd89 100644 --- a/drivers/infiniband/hw/ipath/ipath_file_ops.c +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -1530,7 +1530,7 @@ static int init_subports(struct ipath_devdata *dd, } num_subports = uinfo->spu_subport_cnt; - pd->subport_uregbase = vmalloc(PAGE_SIZE * num_subports); + pd->subport_uregbase = vzalloc(PAGE_SIZE * num_subports); if (!pd->subport_uregbase) { ret = -ENOMEM; goto bail; @@ -1538,13 +1538,13 @@ static int init_subports(struct ipath_devdata *dd, /* Note: pd->port_rcvhdrq_size isn't initialized yet. */ size = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize * sizeof(u32), PAGE_SIZE) * num_subports; - pd->subport_rcvhdr_base = vmalloc(size); + pd->subport_rcvhdr_base = vzalloc(size); if (!pd->subport_rcvhdr_base) { ret = -ENOMEM; goto bail_ureg; } - pd->subport_rcvegrbuf = vmalloc(pd->port_rcvegrbuf_chunks * + pd->subport_rcvegrbuf = vzalloc(pd->port_rcvegrbuf_chunks * pd->port_rcvegrbuf_size * num_subports); if (!pd->subport_rcvegrbuf) { @@ -1556,11 +1556,6 @@ static int init_subports(struct ipath_devdata *dd, pd->port_subport_id = uinfo->spu_subport_id; pd->active_slaves = 1; set_bit(IPATH_PORT_MASTER_UNINIT, &pd->port_flag); - memset(pd->subport_uregbase, 0, PAGE_SIZE * num_subports); - memset(pd->subport_rcvhdr_base, 0, size); - memset(pd->subport_rcvegrbuf, 0, pd->port_rcvegrbuf_chunks * - pd->port_rcvegrbuf_size * - num_subports); goto bail; bail_rhdr: diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c index 776938299e4c..fef0f4201257 100644 --- a/drivers/infiniband/hw/ipath/ipath_init_chip.c +++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c @@ -442,7 +442,7 @@ static void init_shadow_tids(struct ipath_devdata *dd) struct page **pages; dma_addr_t *addrs; - pages = vmalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt * + pages = vzalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt * sizeof(struct page *)); if (!pages) { ipath_dev_err(dd, "failed to allocate shadow page * " @@ -461,9 +461,6 @@ static void init_shadow_tids(struct ipath_devdata *dd) return; } - memset(pages, 0, dd->ipath_cfgports * dd->ipath_rcvtidcnt * - sizeof(struct page *)); - dd->ipath_pageshadow = pages; dd->ipath_physshadow = addrs; } diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c index 7896afbb9ce8..304bd8038541 100644 --- a/drivers/infiniband/hw/qib/qib_init.c +++ b/drivers/infiniband/hw/qib/qib_init.c @@ -270,23 +270,20 @@ static void init_shadow_tids(struct qib_devdata *dd) struct page **pages; dma_addr_t *addrs; - pages = vmalloc(dd->cfgctxts * dd->rcvtidcnt * sizeof(struct page *)); + pages = vzalloc(dd->cfgctxts * dd->rcvtidcnt * sizeof(struct page *)); if (!pages) { qib_dev_err(dd, "failed to allocate shadow page * " "array, no expected sends!\n"); goto bail; } - addrs = vmalloc(dd->cfgctxts * dd->rcvtidcnt * sizeof(dma_addr_t)); + addrs = vzalloc(dd->cfgctxts * dd->rcvtidcnt * sizeof(dma_addr_t)); if (!addrs) { qib_dev_err(dd, "failed to allocate shadow dma handle " "array, no expected sends!\n"); goto bail_free; } - memset(pages, 0, dd->cfgctxts * dd->rcvtidcnt * sizeof(struct page *)); - memset(addrs, 0, dd->cfgctxts * dd->rcvtidcnt * sizeof(dma_addr_t)); - dd->pageshadow = pages; dd->physshadow = addrs; return; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index c1c49f2d35b5..93d55806b967 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -352,15 +352,13 @@ static int ipoib_cm_nonsrq_init_rx(struct net_device *dev, struct ib_cm_id *cm_i int ret; int i; - rx->rx_ring = vmalloc(ipoib_recvq_size * sizeof *rx->rx_ring); + rx->rx_ring = vzalloc(ipoib_recvq_size * sizeof *rx->rx_ring); if (!rx->rx_ring) { printk(KERN_WARNING "%s: failed to allocate CM non-SRQ ring (%d entries)\n", priv->ca->name, ipoib_recvq_size); return -ENOMEM; } - memset(rx->rx_ring, 0, ipoib_recvq_size * sizeof *rx->rx_ring); - t = kmalloc(sizeof *t, GFP_KERNEL); if (!t) { ret = -ENOMEM; @@ -1097,13 +1095,12 @@ static int ipoib_cm_tx_init(struct ipoib_cm_tx *p, u32 qpn, struct ipoib_dev_priv *priv = netdev_priv(p->dev); int ret; - p->tx_ring = vmalloc(ipoib_sendq_size * sizeof *p->tx_ring); + p->tx_ring = vzalloc(ipoib_sendq_size * sizeof *p->tx_ring); if (!p->tx_ring) { ipoib_warn(priv, "failed to allocate tx ring\n"); ret = -ENOMEM; goto err_tx; } - memset(p->tx_ring, 0, ipoib_sendq_size * sizeof *p->tx_ring); p->qp = ipoib_cm_create_tx_qp(p->dev, p); if (IS_ERR(p->qp)) { @@ -1521,7 +1518,7 @@ static void ipoib_cm_create_srq(struct net_device *dev, int max_sge) return; } - priv->cm.srq_ring = vmalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring); + priv->cm.srq_ring = vzalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring); if (!priv->cm.srq_ring) { printk(KERN_WARNING "%s: failed to allocate CM SRQ ring (%d entries)\n", priv->ca->name, ipoib_recvq_size); @@ -1530,7 +1527,6 @@ static void ipoib_cm_create_srq(struct net_device *dev, int max_sge) return; } - memset(priv->cm.srq_ring, 0, ipoib_recvq_size * sizeof *priv->cm.srq_ring); } int ipoib_cm_dev_init(struct net_device *dev) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 7a07a728fe0d..aca3b44f7aed 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -916,13 +916,12 @@ int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port) goto out; } - priv->tx_ring = vmalloc(ipoib_sendq_size * sizeof *priv->tx_ring); + priv->tx_ring = vzalloc(ipoib_sendq_size * sizeof *priv->tx_ring); if (!priv->tx_ring) { printk(KERN_WARNING "%s: failed to allocate TX ring (%d entries)\n", ca->name, ipoib_sendq_size); goto out_rx_ring_cleanup; } - memset(priv->tx_ring, 0, ipoib_sendq_size * sizeof *priv->tx_ring); /* priv->tx_head, tx_tail & tx_outstanding are already 0 */ -- cgit v1.2.1 From 833bcb00c478c674fda0aaea089c1a92abd2da01 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 12 Jan 2011 12:14:13 +0000 Subject: drm/i915/debugfs: Correct format after changing type of err object 'size' Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 19a3d58044dd..3601466c5502 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -703,7 +703,7 @@ static void print_error_buffers(struct seq_file *m, seq_printf(m, "%s [%d]:\n", name, count); while (count--) { - seq_printf(m, " %08x %8zd %04x %04x %08x%s%s%s%s%s%s", + seq_printf(m, " %08x %8u %04x %04x %08x%s%s%s%s%s%s", err->gtt_offset, err->size, err->read_domains, -- cgit v1.2.1 From c8303e7f3f3093c16ef0fa5f73280637c89d4368 Mon Sep 17 00:00:00 2001 From: Indan Zupancic Date: Wed, 12 Jan 2011 11:59:19 +0000 Subject: drm/i915/panel: The backlight is enabled if the current value is non-zero ... and not if the maximum is non-zero. This fixes the typo introduced in 47356eb6728501452 and preserves the backlight value from boot. [ickle: My thanks also to Indan Zupancic for diagnosing the original regression and suggesting the appropriate fix.] Signed-off-by: Chris Wilson Cc: stable@kernel.org # after 47356eb6728501452 --- drivers/gpu/drm/i915/intel_panel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index e00d200df3db..c65992df458d 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -278,6 +278,6 @@ void intel_panel_setup_backlight(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - dev_priv->backlight_level = intel_panel_get_max_backlight(dev); + dev_priv->backlight_level = intel_panel_get_backlight(dev); dev_priv->backlight_enabled = dev_priv->backlight_level != 0; } -- cgit v1.2.1 From 6fed05c9c9812b5882bc708f4da4fa8d5df2875c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 12 Jan 2011 22:03:20 +0100 Subject: ACPI / PM: Fix build problems for !CONFIG_ACPI related to NVS rework The recent rework of the NVS saving/restoring code introduced two build issues for !CONFIG_ACPI, a warning in drivers/acpi/internal.h and an error in arch/x86/kernel/e820.c. Fix them by providing suitable static inline definitions of the relevant functions. Signed-off-by: Rafael J. Wysocki Acked-by: Randy Dunlap Signed-off-by: Len Brown --- drivers/acpi/internal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 7c23b76e8eca..6d69bbedf97a 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -90,7 +90,7 @@ void suspend_nvs_restore(void); static inline int acpi_sleep_proc_init(void) { return 0; } static inline int suspend_nvs_alloc(void) { return 0; } static inline void suspend_nvs_free(void) {} -static inline int suspend_nvs_save(void) {} +static inline int suspend_nvs_save(void) { return 0; } static inline void suspend_nvs_restore(void) {} #endif -- cgit v1.2.1 From bf542a4e7b634c2adcba4241a29082f69b0f45dc Mon Sep 17 00:00:00 2001 From: Sascha Silbe Date: Wed, 12 Jan 2011 23:23:23 +0100 Subject: olpc_battery: Fix up XO-1.5 properties list The patches adding support for CURRENT_NOW, VOLTAGE_NOW, CHARGE_NOW and CHARGE_FULL_DESIGN were based on a tree not including c566d299 ("olpc_battery: Ambient temperature is not available on XO-1.5") and therefore only modified the then-common, now-XO-1 properties list. This patch adds the new properties to XO-1.5 as well. Signed-off-by: Sascha Silbe Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 64e40ff5c44a..0b0ff3a936a6 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -438,9 +438,13 @@ static enum power_supply_property olpc_xo15_bat_props[] = { POWER_SUPPLY_PROP_HEALTH, POWER_SUPPLY_PROP_TECHNOLOGY, POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_VOLTAGE_NOW, POWER_SUPPLY_PROP_CURRENT_AVG, + POWER_SUPPLY_PROP_CURRENT_NOW, POWER_SUPPLY_PROP_CAPACITY, POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CHARGE_NOW, POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_MANUFACTURER, POWER_SUPPLY_PROP_SERIAL_NUMBER, -- cgit v1.2.1 From da995a8aee044bc5d0847e19e351cd48a2cb8bcc Mon Sep 17 00:00:00 2001 From: Aleksey Senin Date: Thu, 2 Dec 2010 11:44:49 +0000 Subject: IB/mlx4: Handle protocol field in multicast table The newest device firmware stores IB vs. Ethernet protocol in two bits in members_count field of multicast group table (0: Infiniband, 1: Ethernet). When changing the QP members count for a multicast group, it important not to reset this information. When calling multicast attach first time, the protocol type should be specified. In this patch we always set it IB, but in the future we will handle Ethernet too. When looking for a QP, the protocol type shoud be checked too. Signed-off-by: Aleksey Senin Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/main.c | 9 +++++---- drivers/net/mlx4/mcg.c | 23 +++++++++++++---------- 2 files changed, 18 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index d68d849ab866..c7a6213c6996 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -623,8 +623,9 @@ static int mlx4_ib_mcg_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) struct mlx4_ib_dev *mdev = to_mdev(ibqp->device); struct mlx4_ib_qp *mqp = to_mqp(ibqp); - err = mlx4_multicast_attach(mdev->dev, &mqp->mqp, gid->raw, !!(mqp->flags & - MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK)); + err = mlx4_multicast_attach(mdev->dev, &mqp->mqp, gid->raw, + !!(mqp->flags & MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK), + MLX4_PROTOCOL_IB); if (err) return err; @@ -635,7 +636,7 @@ static int mlx4_ib_mcg_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) return 0; err_add: - mlx4_multicast_detach(mdev->dev, &mqp->mqp, gid->raw); + mlx4_multicast_detach(mdev->dev, &mqp->mqp, gid->raw, MLX4_PROTOCOL_IB); return err; } @@ -665,7 +666,7 @@ static int mlx4_ib_mcg_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) struct mlx4_ib_gid_entry *ge; err = mlx4_multicast_detach(mdev->dev, - &mqp->mqp, gid->raw); + &mqp->mqp, gid->raw, MLX4_PROTOCOL_IB); if (err) return err; diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/mlx4/mcg.c index c4f88b7ef7b6..79cf42db2ea9 100644 --- a/drivers/net/mlx4/mcg.c +++ b/drivers/net/mlx4/mcg.c @@ -95,7 +95,8 @@ static int mlx4_MGID_HASH(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox * entry in hash chain and *mgm holds end of hash chain. */ static int find_mgm(struct mlx4_dev *dev, - u8 *gid, struct mlx4_cmd_mailbox *mgm_mailbox, + u8 *gid, enum mlx4_protocol protocol, + struct mlx4_cmd_mailbox *mgm_mailbox, u16 *hash, int *prev, int *index) { struct mlx4_cmd_mailbox *mailbox; @@ -134,7 +135,8 @@ static int find_mgm(struct mlx4_dev *dev, return err; } - if (!memcmp(mgm->gid, gid, 16)) + if (!memcmp(mgm->gid, gid, 16) && + be32_to_cpu(mgm->members_count) >> 30 == protocol) return err; *prev = *index; @@ -146,7 +148,7 @@ static int find_mgm(struct mlx4_dev *dev, } int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], - int block_mcast_loopback) + int block_mcast_loopback, enum mlx4_protocol protocol) { struct mlx4_priv *priv = mlx4_priv(dev); struct mlx4_cmd_mailbox *mailbox; @@ -165,7 +167,7 @@ int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], mutex_lock(&priv->mcg_table.mutex); - err = find_mgm(dev, gid, mailbox, &hash, &prev, &index); + err = find_mgm(dev, gid, protocol, mailbox, &hash, &prev, &index); if (err) goto out; @@ -187,7 +189,7 @@ int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], memcpy(mgm->gid, gid, 16); } - members_count = be32_to_cpu(mgm->members_count); + members_count = be32_to_cpu(mgm->members_count) & 0xffffff; if (members_count == MLX4_QP_PER_MGM) { mlx4_err(dev, "MGM at index %x is full.\n", index); err = -ENOMEM; @@ -207,7 +209,7 @@ int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], else mgm->qp[members_count++] = cpu_to_be32(qp->qpn & MGM_QPN_MASK); - mgm->members_count = cpu_to_be32(members_count); + mgm->members_count = cpu_to_be32(members_count | (u32) protocol << 30); err = mlx4_WRITE_MCG(dev, index, mailbox); if (err) @@ -242,7 +244,8 @@ out: } EXPORT_SYMBOL_GPL(mlx4_multicast_attach); -int mlx4_multicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16]) +int mlx4_multicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], + enum mlx4_protocol protocol) { struct mlx4_priv *priv = mlx4_priv(dev); struct mlx4_cmd_mailbox *mailbox; @@ -260,7 +263,7 @@ int mlx4_multicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16]) mutex_lock(&priv->mcg_table.mutex); - err = find_mgm(dev, gid, mailbox, &hash, &prev, &index); + err = find_mgm(dev, gid, protocol, mailbox, &hash, &prev, &index); if (err) goto out; @@ -270,7 +273,7 @@ int mlx4_multicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16]) goto out; } - members_count = be32_to_cpu(mgm->members_count); + members_count = be32_to_cpu(mgm->members_count) & 0xffffff; for (loc = -1, i = 0; i < members_count; ++i) if ((be32_to_cpu(mgm->qp[i]) & MGM_QPN_MASK) == qp->qpn) loc = i; @@ -282,7 +285,7 @@ int mlx4_multicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16]) } - mgm->members_count = cpu_to_be32(--members_count); + mgm->members_count = cpu_to_be32(--members_count | (u32) protocol << 30); mgm->qp[loc] = mgm->qp[i - 1]; mgm->qp[i - 1] = 0; -- cgit v1.2.1 From f77cfe4ea21760268c0277fa3e4b02dfd2a2c2f4 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 7 Jan 2011 11:29:44 +0100 Subject: cpuidle/x86/perf: fix power:cpu_idle double end events and throw cpu_idle events from the cpuidle layer Currently intel_idle and acpi_idle driver show double cpu_idle "exit idle" events -> this patch fixes it and makes cpu_idle events throwing less complex. It also introduces cpu_idle events for all architectures which use the cpuidle subsystem, namely: - arch/arm/mach-at91/cpuidle.c - arch/arm/mach-davinci/cpuidle.c - arch/arm/mach-kirkwood/cpuidle.c - arch/arm/mach-omap2/cpuidle34xx.c - arch/drivers/acpi/processor_idle.c (for all cases, not only mwait) - arch/x86/kernel/process.c (did throw events before, but was a mess) - drivers/idle/intel_idle.c (did throw events before) Convention should be: Fire cpu_idle events inside the current pm_idle function (not somewhere down the the callee tree) to keep things easy. Current possible pm_idle functions in X86: c1e_idle, poll_idle, cpuidle_idle_call, mwait_idle, default_idle -> this is really easy is now. This affects userspace: The type field of the cpu_idle power event can now direclty get mapped to: /sys/devices/system/cpu/cpuX/cpuidle/stateX/{name,desc,usage,time,...} instead of throwing very CPU/mwait specific values. This change is not visible for the intel_idle driver. For the acpi_idle driver it should only be visible if the vendor misses out C-states in his BIOS. Another (perf timechart) patch reads out cpuidle info of cpu_idle events from: /sys/.../cpuidle/stateX/*, then the cpuidle events are mapped to the correct C-/cpuidle state again, even if e.g. vendors miss out C-states in their BIOS and for example only export C1 and C3. -> everything is fine. Signed-off-by: Thomas Renninger CC: Robert Schoene CC: Jean Pihet CC: Arjan van de Ven CC: Ingo Molnar CC: Frederic Weisbecker CC: linux-pm@lists.linux-foundation.org CC: linux-acpi@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-perf-users@vger.kernel.org CC: linux-omap@vger.kernel.org Signed-off-by: Len Brown --- drivers/cpuidle/cpuidle.c | 10 ++++++++-- drivers/idle/intel_idle.c | 2 -- 2 files changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 386888f10df0..e4855c33f897 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -96,7 +96,15 @@ static void cpuidle_idle_call(void) /* enter the state and update stats */ dev->last_state = target_state; + + trace_power_start(POWER_CSTATE, next_state, dev->cpu); + trace_cpu_idle(next_state, dev->cpu); + dev->last_residency = target_state->enter(dev, target_state); + + trace_power_end(dev->cpu); + trace_cpu_idle(PWR_EVENT_EXIT, dev->cpu); + if (dev->last_state) target_state = dev->last_state; @@ -106,8 +114,6 @@ static void cpuidle_idle_call(void) /* give the governor an opportunity to reflect on the outcome */ if (cpuidle_curr_governor->reflect) cpuidle_curr_governor->reflect(dev); - trace_power_end(smp_processor_id()); - trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id()); } /** diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 56ac09d6c930..60fa6ecdb41f 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -220,8 +220,6 @@ static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state) kt_before = ktime_get_real(); stop_critical_timings(); - trace_power_start(POWER_CSTATE, (eax >> 4) + 1, cpu); - trace_cpu_idle((eax >> 4) + 1, cpu); if (!need_resched()) { __monitor((void *)¤t_thread_info()->flags, 0, 0); -- cgit v1.2.1 From 6c64b0c696d7a650f52d75ea59375983ec0d5e33 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Tue, 11 Jan 2011 23:31:01 +0000 Subject: netdev: ucc_geth: Use is_multicast_ether_addr helper Signed-off-by: Tobias Klauser Signed-off-by: David S. Miller --- drivers/net/ucc_geth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index acbdab3d66ca..dc6cb974f25d 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -2031,7 +2031,7 @@ static void ucc_geth_set_multi(struct net_device *dev) netdev_for_each_mc_addr(ha, dev) { /* Only support group multicast for now. */ - if (!(ha->addr[0] & 1)) + if (!is_multicast_ether_addr(ha->addr)) continue; /* Ask CPM to run CRC and set bit in -- cgit v1.2.1 From 12252771691aaf4935206367e0917a8f697acfcb Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Tue, 11 Jan 2011 23:30:11 +0000 Subject: netdev: bfin_mac: Use is_multicast_ether_addr helper Signed-off-by: Tobias Klauser Acked-by: Mike Frysinger Signed-off-by: David S. Miller --- drivers/net/bfin_mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 0b9fc5173aef..fe75e7a9742e 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -1293,7 +1293,7 @@ static void bfin_mac_multicast_hash(struct net_device *dev) addrs = ha->addr; /* skip non-multicast addresses */ - if (!(*addrs & 1)) + if (!is_multicast_ether_addr(addrs)) continue; crc = ether_crc(ETH_ALEN, addrs); -- cgit v1.2.1 From 35ab7b798a2dc4a9b19bd85833f83a19736bcfd8 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 12 Jan 2011 11:21:18 +0000 Subject: bna: Remove unnecessary memset(,0,) kzalloc'd memory doesn't need a memset to 0. Signed-off-by: Joe Perches Acked-by: Rasesh Mody Signed-off-by: David S. Miller --- drivers/net/bna/bnad_ethtool.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bna/bnad_ethtool.c b/drivers/net/bna/bnad_ethtool.c index 99be5ae91991..142d6047da27 100644 --- a/drivers/net/bna/bnad_ethtool.c +++ b/drivers/net/bna/bnad_ethtool.c @@ -275,7 +275,6 @@ bnad_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) ioc_attr = kzalloc(sizeof(*ioc_attr), GFP_KERNEL); if (ioc_attr) { - memset(ioc_attr, 0, sizeof(*ioc_attr)); spin_lock_irqsave(&bnad->bna_lock, flags); bfa_nw_ioc_get_attr(&bnad->bna.device.ioc, ioc_attr); spin_unlock_irqrestore(&bnad->bna_lock, flags); -- cgit v1.2.1 From 77e7bc6194655c36d43707ea53b4f86d1f1c8cf5 Mon Sep 17 00:00:00 2001 From: Yong Shen Date: Tue, 11 Jan 2011 17:21:53 +0800 Subject: spi/imx: Add i.MX53 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 1. Change the Kconfig to include i.MX53 2. add devtype entry for i.MX53 Signed-off-by: Yong Shen Acked-by: Sascha Hauer Acked-by: Uwe Kleine-König Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 4 ++-- drivers/spi/spi_imx.c | 6 ++++++ 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 1906840c1113..879b2a974d64 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -156,10 +156,10 @@ config SPI_IMX_VER_0_4 def_bool y if ARCH_MX31 config SPI_IMX_VER_0_7 - def_bool y if ARCH_MX25 || ARCH_MX35 || ARCH_MX51 + def_bool y if ARCH_MX25 || ARCH_MX35 || ARCH_MX51 || ARCH_MX53 config SPI_IMX_VER_2_3 - def_bool y if ARCH_MX51 + def_bool y if ARCH_MX51 || ARCH_MX53 config SPI_IMX tristate "Freescale i.MX SPI controllers" diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 9469564e6888..1cf9d5faabf4 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -742,6 +742,12 @@ static struct platform_device_id spi_imx_devtype[] = { }, { .name = "imx51-ecspi", .driver_data = SPI_IMX_VER_2_3, + }, { + .name = "imx53-cspi", + .driver_data = SPI_IMX_VER_0_7, + }, { + .name = "imx53-ecspi", + .driver_data = SPI_IMX_VER_2_3, }, { /* sentinel */ } -- cgit v1.2.1 From a76150302d6e7ebc43e1a1ddaee7fd51db8da3b3 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 12 Jan 2011 17:04:08 +0000 Subject: drm/i915: Add a module option to override the use of SSC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In order to workaround the issue with LVDS not working on the Lenovo U160 apparently due to using the wrong SSC frequency, add an option to disable SSC. Suggested-by: Lukács, Ãrpád Bugzillla: https://bugs.freedesktop.org/show_bug.cgi?id=32748 Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/i915_drv.c | 3 +++ drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 17 ++++++----------- drivers/gpu/drm/i915/intel_display.c | 17 +++++++++++------ 4 files changed, 21 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 0de75a23f8e7..72fea2bcfc4f 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -49,6 +49,9 @@ module_param_named(powersave, i915_powersave, int, 0600); unsigned int i915_lvds_downclock = 0; module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400); +unsigned int i915_panel_use_ssc = 1; +module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600); + bool i915_try_reset = true; module_param_named(reset, i915_try_reset, bool, 0600); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 385fc7ec39d3..5969f46ac2d6 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -954,6 +954,7 @@ extern int i915_max_ioctl; extern unsigned int i915_fbpercrtc; extern unsigned int i915_powersave; extern unsigned int i915_lvds_downclock; +extern unsigned int i915_panel_use_ssc; extern int i915_suspend(struct drm_device *dev, pm_message_t state); extern int i915_resume(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index b0b1200ed650..0b44956c336b 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -264,17 +264,12 @@ parse_general_features(struct drm_i915_private *dev_priv, dev_priv->int_crt_support = general->int_crt_support; dev_priv->lvds_use_ssc = general->enable_ssc; - if (dev_priv->lvds_use_ssc) { - if (IS_I85X(dev)) - dev_priv->lvds_ssc_freq = - general->ssc_freq ? 66 : 48; - else if (IS_GEN5(dev) || IS_GEN6(dev)) - dev_priv->lvds_ssc_freq = - general->ssc_freq ? 100 : 120; - else - dev_priv->lvds_ssc_freq = - general->ssc_freq ? 100 : 96; - } + if (IS_I85X(dev)) + dev_priv->lvds_ssc_freq = general->ssc_freq ? 66 : 48; + else if (IS_GEN5(dev) || IS_GEN6(dev)) + dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 120; + else + dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96; } } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 25d96889d7d2..98967f3b7724 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3822,6 +3822,11 @@ static void intel_update_watermarks(struct drm_device *dev) sr_hdisplay, sr_htotal, pixel_size); } +static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) +{ + return dev_priv->lvds_use_ssc && i915_panel_use_ssc; +} + static int intel_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, @@ -3884,7 +3889,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, num_connectors++; } - if (is_lvds && dev_priv->lvds_use_ssc && num_connectors < 2) { + if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) { refclk = dev_priv->lvds_ssc_freq * 1000; DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n", refclk / 1000); @@ -4059,7 +4064,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, udelay(200); if (has_edp_encoder) { - if (dev_priv->lvds_use_ssc) { + if (intel_panel_use_ssc(dev_priv)) { temp |= DREF_SSC1_ENABLE; I915_WRITE(PCH_DREF_CONTROL, temp); @@ -4070,13 +4075,13 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* Enable CPU source on CPU attached eDP */ if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) { - if (dev_priv->lvds_use_ssc) + if (intel_panel_use_ssc(dev_priv)) temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; else temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; } else { /* Enable SSC on PCH eDP if needed */ - if (dev_priv->lvds_use_ssc) { + if (intel_panel_use_ssc(dev_priv)) { DRM_ERROR("enabling SSC on PCH\n"); temp |= DREF_SUPERSPREAD_SOURCE_ENABLE; } @@ -4104,7 +4109,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, int factor = 21; if (is_lvds) { - if ((dev_priv->lvds_use_ssc && + if ((intel_panel_use_ssc(dev_priv) && dev_priv->lvds_ssc_freq == 100) || (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) factor = 25; @@ -4183,7 +4188,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* XXX: just matching BIOS for now */ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ dpll |= 3; - else if (is_lvds && dev_priv->lvds_use_ssc && num_connectors < 2) + else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; else dpll |= PLL_REF_INPUT_DREFCLK; -- cgit v1.2.1 From c37d9a5de94a6fe60a756af350cd21aa9bbbc8a1 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 12 Jan 2011 20:33:01 +0000 Subject: drm/i915: Fix error handler to capture the first batch after the seqno Whilst we had no older batches on the active list, everything was fine. However, if the GPU is free running and the requests are only being reaped by the periodic retirer, than the current seqno may not be at the start of the list. In this case we need to select the first batch after the last seqno written by the gpu and not inclusive of the seqno. Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index e418e8bb61e6..b8e509ae065e 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -720,7 +720,7 @@ i915_error_first_batchbuffer(struct drm_i915_private *dev_priv, if (obj->ring != ring) continue; - if (!i915_seqno_passed(obj->last_rendering_seqno, seqno)) + if (i915_seqno_passed(seqno, obj->last_rendering_seqno)) continue; if ((obj->base.read_domains & I915_GEM_DOMAIN_COMMAND) == 0) -- cgit v1.2.1 From dd6864a4edb9b2d0055a7f30e17cbc521098b1be Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 12 Jan 2011 23:49:13 +0000 Subject: drm/i915/execbuffer: Reorder relocations to match new object order On the fault path, commit 6fe4f140 introduction a regression whereby it changed the sequence of the objects but continued to use the original ordering of relocation entries. The result was that incorrect GTT offsets were being fed into the execbuffer causing lots of misrendering and potential hangs. Reported-by: Linus Torvalds Tested-by: Linus Torvalds Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index e69834341ef0..6b34e98a1270 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -636,6 +636,7 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev, { struct drm_i915_gem_relocation_entry *reloc; struct drm_i915_gem_object *obj; + int *reloc_offset; int i, total, ret; /* We may process another execbuffer during the unlock... */ @@ -653,8 +654,11 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev, for (i = 0; i < count; i++) total += exec[i].relocation_count; + reloc_offset = drm_malloc_ab(count, sizeof(*reloc_offset)); reloc = drm_malloc_ab(total, sizeof(*reloc)); - if (reloc == NULL) { + if (reloc == NULL || reloc_offset == NULL) { + drm_free_large(reloc); + drm_free_large(reloc_offset); mutex_lock(&dev->struct_mutex); return -ENOMEM; } @@ -672,6 +676,7 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev, goto err; } + reloc_offset[i] = total; total += exec[i].relocation_count; } @@ -705,17 +710,14 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev, if (ret) goto err; - total = 0; list_for_each_entry(obj, objects, exec_list) { + int offset = obj->exec_entry - exec; obj->base.pending_read_domains = 0; obj->base.pending_write_domain = 0; ret = i915_gem_execbuffer_relocate_object_slow(obj, eb, - reloc + total); + reloc + reloc_offset[offset]); if (ret) goto err; - - total += exec->relocation_count; - exec++; } /* Leave the user relocations as are, this is the painfully slow path, @@ -726,6 +728,7 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev, err: drm_free_large(reloc); + drm_free_large(reloc_offset); return ret; } -- cgit v1.2.1 From 595dad76a0d213adc3dbe4f463f7887e905082b9 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 13 Jan 2011 11:03:48 +0000 Subject: drm/i915/execbuffer: Clear domains before beginning reloc processing After reordering the sequence of relocating objects, commit 6fe4f1404, we can no longer rely on seeing all reloc targets prior to performing the relocation. As a result we were ignoring the need to flush objects from the render cache and invalidate the sampler caches, resulting in rendering glitches. So we need to clear the relocation domains earlier. Reported-by: Linus Torvalds Tested-by: Linus Torvalds Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 6b34e98a1270..8db88e34ef7b 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -464,8 +464,6 @@ i915_gem_execbuffer_relocate(struct drm_device *dev, int ret; list_for_each_entry(obj, objects, exec_list) { - obj->base.pending_read_domains = 0; - obj->base.pending_write_domain = 0; ret = i915_gem_execbuffer_relocate_object(obj, eb); if (ret) return ret; @@ -505,6 +503,9 @@ i915_gem_execbuffer_reserve(struct intel_ring_buffer *ring, list_move(&obj->exec_list, &ordered_objects); else list_move_tail(&obj->exec_list, &ordered_objects); + + obj->base.pending_read_domains = 0; + obj->base.pending_write_domain = 0; } list_splice(&ordered_objects, objects); @@ -712,8 +713,6 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev, list_for_each_entry(obj, objects, exec_list) { int offset = obj->exec_entry - exec; - obj->base.pending_read_domains = 0; - obj->base.pending_write_domain = 0; ret = i915_gem_execbuffer_relocate_object_slow(obj, eb, reloc + reloc_offset[offset]); if (ret) -- cgit v1.2.1 From c217649bf2d60ac119afd71d938278cffd55962b Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 13 Jan 2011 19:53:46 +0000 Subject: dm: dont take i_mutex to change device size No longer needlessly hold md->bdev->bd_inode->i_mutex when changing the size of a DM device. This additional locking is unnecessary because i_size_write() is already protected by the existing critical section in dm_swap_table(). DM already has a reference on md->bdev so the associated bd_inode may be changed without lifetime concerns. A negative side-effect of having held md->bdev->bd_inode->i_mutex was that a concurrent DM device resize and flush (via fsync) would deadlock. Dropping md->bdev->bd_inode->i_mutex eliminates this potential for deadlock. The following reproducer no longer deadlocks: https://www.redhat.com/archives/dm-devel/2009-July/msg00284.html Signed-off-by: Mike Snitzer Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon Cc: stable@kernel.org --- drivers/md/dm.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm.c b/drivers/md/dm.c index f48a2f359ac4..4ef066a3090f 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1992,13 +1992,14 @@ static void event_callback(void *context) wake_up(&md->eventq); } +/* + * Protected by md->suspend_lock obtained by dm_swap_table(). + */ static void __set_size(struct mapped_device *md, sector_t size) { set_capacity(md->disk, size); - mutex_lock(&md->bdev->bd_inode->i_mutex); i_size_write(md->bdev->bd_inode, (loff_t)size << SECTOR_SHIFT); - mutex_unlock(&md->bdev->bd_inode->i_mutex); } /* -- cgit v1.2.1 From 09c9d4c9b6a2b5909ae3c6265e4cd3820b636863 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 13 Jan 2011 19:59:46 +0000 Subject: dm mpath: disable blk_abort_queue Revert commit 224cb3e981f1b2f9f93dbd49eaef505d17d894c2 dm: Call blk_abort_queue on failed paths Multipath began to use blk_abort_queue() to allow for lower latency path deactivation. This was found to cause list corruption: the cmd gets blk_abort_queued/timedout run on it and the scsi eh somehow is able to complete and run scsi_queue_insert while scsi_request_fn is still trying to process the request. https://www.redhat.com/archives/dm-devel/2010-November/msg00085.html Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon Cc: Mike Anderson Cc: Mike Christie Cc: stable@kernel.org --- drivers/md/dm-mpath.c | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 487ecda90ad4..406091f9692b 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -33,7 +33,6 @@ struct pgpath { unsigned fail_count; /* Cumulative failure count */ struct dm_path path; - struct work_struct deactivate_path; struct work_struct activate_path; }; @@ -116,7 +115,6 @@ static struct workqueue_struct *kmultipathd, *kmpath_handlerd; static void process_queued_ios(struct work_struct *work); static void trigger_event(struct work_struct *work); static void activate_path(struct work_struct *work); -static void deactivate_path(struct work_struct *work); /*----------------------------------------------- @@ -129,7 +127,6 @@ static struct pgpath *alloc_pgpath(void) if (pgpath) { pgpath->is_active = 1; - INIT_WORK(&pgpath->deactivate_path, deactivate_path); INIT_WORK(&pgpath->activate_path, activate_path); } @@ -141,14 +138,6 @@ static void free_pgpath(struct pgpath *pgpath) kfree(pgpath); } -static void deactivate_path(struct work_struct *work) -{ - struct pgpath *pgpath = - container_of(work, struct pgpath, deactivate_path); - - blk_abort_queue(pgpath->path.dev->bdev->bd_disk->queue); -} - static struct priority_group *alloc_priority_group(void) { struct priority_group *pg; @@ -995,7 +984,6 @@ static int fail_path(struct pgpath *pgpath) pgpath->path.dev->name, m->nr_valid_paths); schedule_work(&m->trigger_event); - queue_work(kmultipathd, &pgpath->deactivate_path); out: spin_unlock_irqrestore(&m->lock, flags); -- cgit v1.2.1 From d9bf0b508ddfe19883b982b29a03c02ccbf53806 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 13 Jan 2011 19:59:47 +0000 Subject: dm io: remove BIO_RW_SYNCIO flag from kcopyd Remove the REQ_SYNC flag to improve write throughput when writing to the origin with a snapshot on the same device (using the CFQ I/O scheduler). Sequential write throughput (chunksize of 4k, 32k, 512k) unpatched: 8.5, 8.6, 9.3 MB/s patched: 15.2, 18.5, 17.5 MB/s Snapshot exception reallocations are triggered by writes that are usually async, so mark the associated dm_io_request as async as well. This helps when using the CFQ I/O scheduler because it has separate queues for sync and async I/O. Async is optimized for throughput; sync for latency. With this change we're consciously favoring throughput over latency. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-kcopyd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index d8587bac5682..5ad9231c8700 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -345,7 +345,7 @@ static int run_io_job(struct kcopyd_job *job) { int r; struct dm_io_request io_req = { - .bi_rw = job->rw | REQ_SYNC | REQ_UNPLUG, + .bi_rw = job->rw | REQ_UNPLUG, .mem.type = DM_IO_PAGE_LIST, .mem.ptr.pl = job->pages, .mem.offset = job->offset, -- cgit v1.2.1 From 84c89557a302e18414a011cc52b1abd034860743 Mon Sep 17 00:00:00 2001 From: Peter Jones Date: Thu, 13 Jan 2011 19:59:47 +0000 Subject: dm ioctl: allow rename to fill empty uuid Allow the uuid of a mapped device to be set after device creation. Previously the uuid (which is optional) could only be set by DM_DEV_CREATE. If no uuid was supplied it could not be set later. Sometimes it's necessary to create the device before the uuid is known, and in such cases the uuid must be filled in after the creation. This patch extends DM_DEV_RENAME to accept a uuid accompanied by a new flag DM_UUID_FLAG. This can only be done once and if no uuid was previously supplied. It cannot be used to change an existing uuid. DM_VERSION_MINOR is also bumped to 19 to indicate this interface extension is available. Signed-off-by: Peter Jones Signed-off-by: Jonathan Brassow Signed-off-by: Alasdair G Kergon --- drivers/md/dm-ioctl.c | 103 ++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 78 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index 4b54618b4159..f3481d922206 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -295,19 +295,55 @@ retry: DMWARN("remove_all left %d open device(s)", dev_skipped); } +/* + * Set the uuid of a hash_cell that isn't already set. + */ +static void __set_cell_uuid(struct hash_cell *hc, char *new_uuid) +{ + mutex_lock(&dm_hash_cells_mutex); + hc->uuid = new_uuid; + mutex_unlock(&dm_hash_cells_mutex); + + list_add(&hc->uuid_list, _uuid_buckets + hash_str(new_uuid)); +} + +/* + * Changes the name of a hash_cell and returns the old name for + * the caller to free. + */ +static char *__change_cell_name(struct hash_cell *hc, char *new_name) +{ + char *old_name; + + /* + * Rename and move the name cell. + */ + list_del(&hc->name_list); + old_name = hc->name; + + mutex_lock(&dm_hash_cells_mutex); + hc->name = new_name; + mutex_unlock(&dm_hash_cells_mutex); + + list_add(&hc->name_list, _name_buckets + hash_str(new_name)); + + return old_name; +} + static struct mapped_device *dm_hash_rename(struct dm_ioctl *param, const char *new) { - char *new_name, *old_name; + char *new_data, *old_name = NULL; struct hash_cell *hc; struct dm_table *table; struct mapped_device *md; + unsigned change_uuid = (param->flags & DM_UUID_FLAG) ? 1 : 0; /* * duplicate new. */ - new_name = kstrdup(new, GFP_KERNEL); - if (!new_name) + new_data = kstrdup(new, GFP_KERNEL); + if (!new_data) return ERR_PTR(-ENOMEM); down_write(&_hash_lock); @@ -315,13 +351,19 @@ static struct mapped_device *dm_hash_rename(struct dm_ioctl *param, /* * Is new free ? */ - hc = __get_name_cell(new); + if (change_uuid) + hc = __get_uuid_cell(new); + else + hc = __get_name_cell(new); + if (hc) { - DMWARN("asked to rename to an already-existing name %s -> %s", + DMWARN("Unable to change %s on mapped device %s to one that " + "already exists: %s", + change_uuid ? "uuid" : "name", param->name, new); dm_put(hc->md); up_write(&_hash_lock); - kfree(new_name); + kfree(new_data); return ERR_PTR(-EBUSY); } @@ -330,22 +372,30 @@ static struct mapped_device *dm_hash_rename(struct dm_ioctl *param, */ hc = __get_name_cell(param->name); if (!hc) { - DMWARN("asked to rename a non-existent device %s -> %s", - param->name, new); + DMWARN("Unable to rename non-existent device, %s to %s%s", + param->name, change_uuid ? "uuid " : "", new); up_write(&_hash_lock); - kfree(new_name); + kfree(new_data); return ERR_PTR(-ENXIO); } /* - * rename and move the name cell. + * Does this device already have a uuid? */ - list_del(&hc->name_list); - old_name = hc->name; - mutex_lock(&dm_hash_cells_mutex); - hc->name = new_name; - mutex_unlock(&dm_hash_cells_mutex); - list_add(&hc->name_list, _name_buckets + hash_str(new_name)); + if (change_uuid && hc->uuid) { + DMWARN("Unable to change uuid of mapped device %s to %s " + "because uuid is already set to %s", + param->name, new, hc->uuid); + dm_put(hc->md); + up_write(&_hash_lock); + kfree(new_data); + return ERR_PTR(-EINVAL); + } + + if (change_uuid) + __set_cell_uuid(hc, new_data); + else + old_name = __change_cell_name(hc, new_data); /* * Wake up any dm event waiters. @@ -774,21 +824,24 @@ static int invalid_str(char *str, void *end) static int dev_rename(struct dm_ioctl *param, size_t param_size) { int r; - char *new_name = (char *) param + param->data_start; + char *new_data = (char *) param + param->data_start; struct mapped_device *md; + unsigned change_uuid = (param->flags & DM_UUID_FLAG) ? 1 : 0; - if (new_name < param->data || - invalid_str(new_name, (void *) param + param_size) || - strlen(new_name) > DM_NAME_LEN - 1) { - DMWARN("Invalid new logical volume name supplied."); + if (new_data < param->data || + invalid_str(new_data, (void *) param + param_size) || + strlen(new_data) > (change_uuid ? DM_UUID_LEN - 1 : DM_NAME_LEN - 1)) { + DMWARN("Invalid new mapped device name or uuid string supplied."); return -EINVAL; } - r = check_name(new_name); - if (r) - return r; + if (!change_uuid) { + r = check_name(new_data); + if (r) + return r; + } - md = dm_hash_rename(param, new_name); + md = dm_hash_rename(param, new_data); if (IS_ERR(md)) return PTR_ERR(md); -- cgit v1.2.1 From 5fc2ffeabb9ee0fc0e71ff16b49f34f0ed3d05b4 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 13 Jan 2011 19:59:48 +0000 Subject: dm raid1: support discard Enable discard support in the DM mirror target. Also change an existing use of 'bvec' to 'addr' in the union. Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-raid1.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 19a59b041c27..c87756eb7a21 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -261,7 +261,7 @@ static int mirror_flush(struct dm_target *ti) struct dm_io_request io_req = { .bi_rw = WRITE_FLUSH, .mem.type = DM_IO_KMEM, - .mem.ptr.bvec = NULL, + .mem.ptr.addr = NULL, .client = ms->io_client, }; @@ -637,6 +637,12 @@ static void do_write(struct mirror_set *ms, struct bio *bio) .client = ms->io_client, }; + if (bio->bi_rw & REQ_DISCARD) { + io_req.bi_rw |= REQ_DISCARD; + io_req.mem.type = DM_IO_KMEM; + io_req.mem.ptr.addr = NULL; + } + for (i = 0, m = ms->mirror; i < ms->nr_mirrors; i++, m++) map_region(dest++, m, bio); @@ -670,7 +676,8 @@ static void do_writes(struct mirror_set *ms, struct bio_list *writes) bio_list_init(&requeue); while ((bio = bio_list_pop(writes))) { - if (bio->bi_rw & REQ_FLUSH) { + if ((bio->bi_rw & REQ_FLUSH) || + (bio->bi_rw & REQ_DISCARD)) { bio_list_add(&sync, bio); continue; } @@ -1076,6 +1083,7 @@ static int mirror_ctr(struct dm_target *ti, unsigned int argc, char **argv) ti->private = ms; ti->split_io = dm_rh_get_region_size(ms->rh); ti->num_flush_requests = 1; + ti->num_discard_requests = 1; ms->kmirrord_wq = create_singlethread_workqueue("kmirrord"); if (!ms->kmirrord_wq) { -- cgit v1.2.1 From 4a1aeb98297e17f4e0a8cdda919e63bf528b2e5d Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Thu, 13 Jan 2011 19:59:48 +0000 Subject: dm: remove dm_mutex after bkl conversion This patch replaces dm_mutex with _minor_lock in dm_blk_close() and then removes it. During the BKL conversion, commit 6e9624b8caec290d28b4c6d9ec75749df6372b87 (block: push down BKL into .open and .release) pushed lock_kernel() down into dm_blk_open/close calls. Commit 2a48fc0ab24241755dc93bfd4f01d68efab47f5a (block: autoconvert trivial BKL users to private mutex) converted it to a local mutex, but _minor_lock is sufficient. Signed-off-by: Milan Broz Signed-off-by: Alasdair G Kergon --- drivers/md/dm.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 4ef066a3090f..0de692176ad4 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -32,7 +32,6 @@ #define DM_COOKIE_ENV_VAR_NAME "DM_COOKIE" #define DM_COOKIE_LENGTH 24 -static DEFINE_MUTEX(dm_mutex); static const char *_name = DM_NAME; static unsigned int major = 0; @@ -328,7 +327,6 @@ static int dm_blk_open(struct block_device *bdev, fmode_t mode) { struct mapped_device *md; - mutex_lock(&dm_mutex); spin_lock(&_minor_lock); md = bdev->bd_disk->private_data; @@ -346,7 +344,6 @@ static int dm_blk_open(struct block_device *bdev, fmode_t mode) out: spin_unlock(&_minor_lock); - mutex_unlock(&dm_mutex); return md ? 0 : -ENXIO; } @@ -355,10 +352,12 @@ static int dm_blk_close(struct gendisk *disk, fmode_t mode) { struct mapped_device *md = disk->private_data; - mutex_lock(&dm_mutex); + spin_lock(&_minor_lock); + atomic_dec(&md->open_count); dm_put(md); - mutex_unlock(&dm_mutex); + + spin_unlock(&_minor_lock); return 0; } -- cgit v1.2.1 From 69a8cfcda21017364df1c21b720daf304b5598a6 Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Thu, 13 Jan 2011 19:59:49 +0000 Subject: dm crypt: set key size early Simplify key size verification (hexadecimal string) and set key size early in constructor. (Patch required by later changes.) Signed-off-by: Milan Broz Signed-off-by: Alasdair G Kergon --- drivers/md/dm-crypt.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index d5b0e4c0e702..4c4408a2602f 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -973,15 +973,15 @@ static void crypt_encode_key(char *hex, u8 *key, unsigned int size) static int crypt_set_key(struct crypt_config *cc, char *key) { - unsigned key_size = strlen(key) >> 1; - - if (cc->key_size && cc->key_size != key_size) + /* The key size may not be changed. */ + if (cc->key_size != (strlen(key) >> 1)) return -EINVAL; - cc->key_size = key_size; /* initial settings */ + /* Hyphen (which gives a key_size of zero) means there is no key. */ + if (!cc->key_size && strcmp(key, "-")) + return -EINVAL; - if ((!key_size && strcmp(key, "-")) || - (key_size && crypt_decode_key(cc->key, key, key_size) < 0)) + if (cc->key_size && crypt_decode_key(cc->key, key, cc->key_size) < 0) return -EINVAL; set_bit(DM_CRYPT_KEY_VALID, &cc->flags); @@ -1194,6 +1194,7 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) ti->error = "Cannot allocate encryption context"; return -ENOMEM; } + cc->key_size = key_size; ti->private = cc; ret = crypt_ctr_cipher(ti, argv[0], argv[1]); -- cgit v1.2.1 From 4a038677df4da84e42fd68b5ab2dfa4d82baa444 Mon Sep 17 00:00:00 2001 From: Jonathan Brassow Date: Thu, 13 Jan 2011 19:59:49 +0000 Subject: dm log userspace: trap all failed log construction errors When constructing a mirror log, it is possible for the initial request to fail for other reasons besides -ESRCH. These must be handled too. Signed-off-by: Jonathan Brassow Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-log-userspace-base.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-log-userspace-base.c b/drivers/md/dm-log-userspace-base.c index 1ed0094f064b..1c25ad3d02a2 100644 --- a/drivers/md/dm-log-userspace-base.c +++ b/drivers/md/dm-log-userspace-base.c @@ -181,8 +181,11 @@ static int userspace_ctr(struct dm_dirty_log *log, struct dm_target *ti, r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_CTR, ctr_str, str_size, NULL, NULL); - if (r == -ESRCH) { - DMERR("Userspace log server not found"); + if (r < 0) { + if (r == -ESRCH) + DMERR("Userspace log server not found"); + else + DMERR("Userspace log server failed to create log"); goto out; } @@ -214,10 +217,9 @@ out: static void userspace_dtr(struct dm_dirty_log *log) { - int r; struct log_c *lc = log->context; - r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_DTR, + (void) dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_DTR, NULL, 0, NULL, NULL); -- cgit v1.2.1 From 8d35d3e37eed884ba15229a146df846f399909b4 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 13 Jan 2011 19:59:50 +0000 Subject: dm kcopyd: delay unplugging Make kcopyd merge more I/O requests by using device unplugging. Without this patch, each I/O request is dispatched separately to the device. If the device supports tagged queuing, there are many small requests sent to the device. To improve performance, this patch will batch as many requests as possible, allowing the queue to merge consecutive requests, and send them to the device at once. In my tests (15k SCSI disk), this patch improves sequential write throughput: Sequential write throughput (chunksize of 4k, 32k, 512k) unpatched: 15.2, 18.5, 17.5 MB/s patched: 14.4, 22.6, 23.0 MB/s In most common uses (snapshot or two-way mirror), kcopyd is only used for two devices, one for reading and the other for writing, thus this optimization is implemented only for two devices. The optimization may be extended to n-way mirrors with some code complexity increase. We keep track of two block devices to unplug (one for read and the other for write) and unplug them when exiting "do_work" thread. If there are more devices used (in theory it could happen, in practice it is rare), we unplug immediately. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-kcopyd.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 51 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 5ad9231c8700..dad32f8bce7d 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -37,6 +37,13 @@ struct dm_kcopyd_client { unsigned int nr_pages; unsigned int nr_free_pages; + /* + * Block devices to unplug. + * Non-NULL pointer means that a block device has some pending requests + * and needs to be unplugged. + */ + struct block_device *unplug[2]; + struct dm_io_client *io_client; wait_queue_head_t destroyq; @@ -308,6 +315,31 @@ static int run_complete_job(struct kcopyd_job *job) return 0; } +/* + * Unplug the block device at the specified index. + */ +static void unplug(struct dm_kcopyd_client *kc, int rw) +{ + if (kc->unplug[rw] != NULL) { + blk_unplug(bdev_get_queue(kc->unplug[rw])); + kc->unplug[rw] = NULL; + } +} + +/* + * Prepare block device unplug. If there's another device + * to be unplugged at the same array index, we unplug that + * device first. + */ +static void prepare_unplug(struct dm_kcopyd_client *kc, int rw, + struct block_device *bdev) +{ + if (likely(kc->unplug[rw] == bdev)) + return; + unplug(kc, rw); + kc->unplug[rw] = bdev; +} + static void complete_io(unsigned long error, void *context) { struct kcopyd_job *job = (struct kcopyd_job *) context; @@ -345,7 +377,7 @@ static int run_io_job(struct kcopyd_job *job) { int r; struct dm_io_request io_req = { - .bi_rw = job->rw | REQ_UNPLUG, + .bi_rw = job->rw, .mem.type = DM_IO_PAGE_LIST, .mem.ptr.pl = job->pages, .mem.offset = job->offset, @@ -354,10 +386,16 @@ static int run_io_job(struct kcopyd_job *job) .client = job->kc->io_client, }; - if (job->rw == READ) + if (job->rw == READ) { r = dm_io(&io_req, 1, &job->source, NULL); - else + prepare_unplug(job->kc, READ, job->source.bdev); + } else { + if (job->num_dests > 1) + io_req.bi_rw |= REQ_UNPLUG; r = dm_io(&io_req, job->num_dests, job->dests, NULL); + if (!(io_req.bi_rw & REQ_UNPLUG)) + prepare_unplug(job->kc, WRITE, job->dests[0].bdev); + } return r; } @@ -435,10 +473,18 @@ static void do_work(struct work_struct *work) * Pages jobs when successful will jump onto the io jobs * list. io jobs call wake when they complete and it all * starts again. + * + * Note that io_jobs add block devices to the unplug array, + * this array is cleared with "unplug" calls. It is thus + * forbidden to run complete_jobs after io_jobs and before + * unplug because the block device could be destroyed in + * job completion callback. */ process_jobs(&kc->complete_jobs, kc, run_complete_job); process_jobs(&kc->pages_jobs, kc, run_pages_job); process_jobs(&kc->io_jobs, kc, run_io_job); + unplug(kc, READ); + unplug(kc, WRITE); } /* @@ -619,6 +665,8 @@ int dm_kcopyd_client_create(unsigned int nr_pages, INIT_LIST_HEAD(&kc->io_jobs); INIT_LIST_HEAD(&kc->pages_jobs); + memset(kc->unplug, 0, sizeof(kc->unplug)); + kc->job_pool = mempool_create_slab_pool(MIN_JOBS, _job_cache); if (!kc->job_pool) goto bad_slab; -- cgit v1.2.1 From 909cc4fb48dd9870f6ebe4bd32cfbe37c102df62 Mon Sep 17 00:00:00 2001 From: Jonathan Brassow Date: Thu, 13 Jan 2011 19:59:50 +0000 Subject: dm log userspace: split flush queue Split the 'flush_list', which contained a mix of both 'mark' and 'clear' requests, into two distinct lists ('mark_list' and 'clear_list'). The device mapper log implementations (used by various DM targets) are allowed to cache 'mark' and 'clear' requests until a 'flush' is received. Until now, these cached requests were kept in the same list. They will now be put into distinct lists to facilitate group processing of these requests (in the next patch). Signed-off-by: Jonathan Brassow Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-log-userspace-base.c | 41 +++++++++++++++++++++++++++++--------- 1 file changed, 32 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-log-userspace-base.c b/drivers/md/dm-log-userspace-base.c index 1c25ad3d02a2..767adf300fa5 100644 --- a/drivers/md/dm-log-userspace-base.c +++ b/drivers/md/dm-log-userspace-base.c @@ -37,8 +37,15 @@ struct log_c { */ uint64_t in_sync_hint; + /* + * Mark and clear requests are held until a flush is issued + * so that we can group, and thereby limit, the amount of + * network traffic between kernel and userspace. The 'flush_lock' + * is used to protect these lists. + */ spinlock_t flush_lock; - struct list_head flush_list; /* only for clear and mark requests */ + struct list_head mark_list; + struct list_head clear_list; }; static mempool_t *flush_entry_pool; @@ -169,7 +176,8 @@ static int userspace_ctr(struct dm_dirty_log *log, struct dm_target *ti, strncpy(lc->uuid, argv[0], DM_UUID_LEN); spin_lock_init(&lc->flush_lock); - INIT_LIST_HEAD(&lc->flush_list); + INIT_LIST_HEAD(&lc->mark_list); + INIT_LIST_HEAD(&lc->clear_list); str_size = build_constructor_string(ti, argc - 1, argv + 1, &ctr_str); if (str_size < 0) { @@ -362,14 +370,16 @@ static int userspace_flush(struct dm_dirty_log *log) int r = 0; unsigned long flags; struct log_c *lc = log->context; - LIST_HEAD(flush_list); + LIST_HEAD(mark_list); + LIST_HEAD(clear_list); struct flush_entry *fe, *tmp_fe; spin_lock_irqsave(&lc->flush_lock, flags); - list_splice_init(&lc->flush_list, &flush_list); + list_splice_init(&lc->mark_list, &mark_list); + list_splice_init(&lc->clear_list, &clear_list); spin_unlock_irqrestore(&lc->flush_lock, flags); - if (list_empty(&flush_list)) + if (list_empty(&mark_list) && list_empty(&clear_list)) return 0; /* @@ -379,7 +389,16 @@ static int userspace_flush(struct dm_dirty_log *log) * do it one by one. */ - list_for_each_entry(fe, &flush_list, list) { + list_for_each_entry(fe, &mark_list, list) { + r = userspace_do_request(lc, lc->uuid, fe->type, + (char *)&fe->region, + sizeof(fe->region), + NULL, NULL); + if (r) + goto fail; + } + + list_for_each_entry(fe, &clear_list, list) { r = userspace_do_request(lc, lc->uuid, fe->type, (char *)&fe->region, sizeof(fe->region), @@ -397,7 +416,11 @@ fail: * Calling code will receive an error and will know that * the log facility has failed. */ - list_for_each_entry_safe(fe, tmp_fe, &flush_list, list) { + list_for_each_entry_safe(fe, tmp_fe, &mark_list, list) { + list_del(&fe->list); + mempool_free(fe, flush_entry_pool); + } + list_for_each_entry_safe(fe, tmp_fe, &clear_list, list) { list_del(&fe->list); mempool_free(fe, flush_entry_pool); } @@ -427,7 +450,7 @@ static void userspace_mark_region(struct dm_dirty_log *log, region_t region) spin_lock_irqsave(&lc->flush_lock, flags); fe->type = DM_ULOG_MARK_REGION; fe->region = region; - list_add(&fe->list, &lc->flush_list); + list_add(&fe->list, &lc->mark_list); spin_unlock_irqrestore(&lc->flush_lock, flags); return; @@ -464,7 +487,7 @@ static void userspace_clear_region(struct dm_dirty_log *log, region_t region) spin_lock_irqsave(&lc->flush_lock, flags); fe->type = DM_ULOG_CLEAR_REGION; fe->region = region; - list_add(&fe->list, &lc->flush_list); + list_add(&fe->list, &lc->clear_list); spin_unlock_irqrestore(&lc->flush_lock, flags); return; -- cgit v1.2.1 From 085ae0651b2791f3a430ddb76da92925b9952e13 Mon Sep 17 00:00:00 2001 From: Jonathan Brassow Date: Thu, 13 Jan 2011 19:59:51 +0000 Subject: dm log userspace: group clear and mark requests Allow the device-mapper log's 'mark' and 'clear' requests to be grouped and processed in a batch. This can significantly reduce the amount of traffic going between the kernel and userspace (where the processing daemon resides). Signed-off-by: Jonathan Brassow Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-log-userspace-base.c | 102 ++++++++++++++++++++++++++++--------- 1 file changed, 79 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-log-userspace-base.c b/drivers/md/dm-log-userspace-base.c index 767adf300fa5..31e1687e7bf6 100644 --- a/drivers/md/dm-log-userspace-base.c +++ b/drivers/md/dm-log-userspace-base.c @@ -18,6 +18,14 @@ struct flush_entry { struct list_head list; }; +/* + * This limit on the number of mark and clear request is, to a degree, + * arbitrary. However, there is some basis for the choice in the limits + * imposed on the size of data payload by dm-log-userspace-transfer.c: + * dm_consult_userspace(). + */ +#define MAX_FLUSH_GROUP_COUNT 32 + struct log_c { struct dm_target *ti; uint32_t region_size; @@ -348,6 +356,71 @@ static int userspace_in_sync(struct dm_dirty_log *log, region_t region, return (r) ? 0 : (int)in_sync; } +static int flush_one_by_one(struct log_c *lc, struct list_head *flush_list) +{ + int r = 0; + struct flush_entry *fe; + + list_for_each_entry(fe, flush_list, list) { + r = userspace_do_request(lc, lc->uuid, fe->type, + (char *)&fe->region, + sizeof(fe->region), + NULL, NULL); + if (r) + break; + } + + return r; +} + +static int flush_by_group(struct log_c *lc, struct list_head *flush_list) +{ + int r = 0; + int count; + uint32_t type = 0; + struct flush_entry *fe, *tmp_fe; + LIST_HEAD(tmp_list); + uint64_t group[MAX_FLUSH_GROUP_COUNT]; + + /* + * Group process the requests + */ + while (!list_empty(flush_list)) { + count = 0; + + list_for_each_entry_safe(fe, tmp_fe, flush_list, list) { + group[count] = fe->region; + count++; + + list_del(&fe->list); + list_add(&fe->list, &tmp_list); + + type = fe->type; + if (count >= MAX_FLUSH_GROUP_COUNT) + break; + } + + r = userspace_do_request(lc, lc->uuid, type, + (char *)(group), + count * sizeof(uint64_t), + NULL, NULL); + if (r) { + /* Group send failed. Attempt one-by-one. */ + list_splice_init(&tmp_list, flush_list); + r = flush_one_by_one(lc, flush_list); + break; + } + } + + /* + * Must collect flush_entrys that were successfully processed + * as a group so that they will be free'd by the caller. + */ + list_splice_init(&tmp_list, flush_list); + + return r; +} + /* * userspace_flush * @@ -382,30 +455,13 @@ static int userspace_flush(struct dm_dirty_log *log) if (list_empty(&mark_list) && list_empty(&clear_list)) return 0; - /* - * FIXME: Count up requests, group request types, - * allocate memory to stick all requests in and - * send to server in one go. Failing the allocation, - * do it one by one. - */ - - list_for_each_entry(fe, &mark_list, list) { - r = userspace_do_request(lc, lc->uuid, fe->type, - (char *)&fe->region, - sizeof(fe->region), - NULL, NULL); - if (r) - goto fail; - } + r = flush_by_group(lc, &mark_list); + if (r) + goto fail; - list_for_each_entry(fe, &clear_list, list) { - r = userspace_do_request(lc, lc->uuid, fe->type, - (char *)&fe->region, - sizeof(fe->region), - NULL, NULL); - if (r) - goto fail; - } + r = flush_by_group(lc, &clear_list); + if (r) + goto fail; r = userspace_do_request(lc, lc->uuid, DM_ULOG_FLUSH, NULL, 0, NULL, NULL); -- cgit v1.2.1 From 86a54a4802df10d23ccd655e2083e812fe990243 Mon Sep 17 00:00:00 2001 From: Jonathan Brassow Date: Thu, 13 Jan 2011 19:59:52 +0000 Subject: dm log userspace: add version number to comms This patch adds a 'version' field to the 'dm_ulog_request' structure. The 'version' field is taken from a portion of the unused 'padding' field in the 'dm_ulog_request' structure. This was done to avoid changing the size of the structure and possibly disrupting backwards compatibility. The version number will help notify user-space daemons when a change has been made to the kernel/userspace log API. Signed-off-by: Jonathan Brassow Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-log-userspace-base.c | 6 ++++-- drivers/md/dm-log-userspace-transfer.c | 1 + 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-log-userspace-base.c b/drivers/md/dm-log-userspace-base.c index 31e1687e7bf6..aa2e0c374ab3 100644 --- a/drivers/md/dm-log-userspace-base.c +++ b/drivers/md/dm-log-userspace-base.c @@ -12,6 +12,8 @@ #include "dm-log-userspace-transfer.h" +#define DM_LOG_USERSPACE_VSN "1.1.0" + struct flush_entry { int type; region_t region; @@ -765,7 +767,7 @@ static int __init userspace_dirty_log_init(void) return r; } - DMINFO("version 1.0.0 loaded"); + DMINFO("version " DM_LOG_USERSPACE_VSN " loaded"); return 0; } @@ -775,7 +777,7 @@ static void __exit userspace_dirty_log_exit(void) dm_ulog_tfr_exit(); mempool_destroy(flush_entry_pool); - DMINFO("version 1.0.0 unloaded"); + DMINFO("version " DM_LOG_USERSPACE_VSN " unloaded"); return; } diff --git a/drivers/md/dm-log-userspace-transfer.c b/drivers/md/dm-log-userspace-transfer.c index 075cbcf8a9f5..049eaf12aaab 100644 --- a/drivers/md/dm-log-userspace-transfer.c +++ b/drivers/md/dm-log-userspace-transfer.c @@ -198,6 +198,7 @@ resend: memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - sizeof(struct cn_msg)); memcpy(tfr->uuid, uuid, DM_UUID_LEN); + tfr->version = DM_ULOG_REQUEST_VERSION; tfr->luid = luid; tfr->seq = dm_ulog_seq++; -- cgit v1.2.1 From 7dbcd137414f3877737802438926d6dba7906a9a Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Thu, 13 Jan 2011 19:59:52 +0000 Subject: dm crypt: simplify compatible table output Rename cc->cipher_mode to cc->cipher_string and store the whole of the cipher information so it can easily be printed when processing the DM_DEV_STATUS ioctl. Signed-off-by: Milan Broz Signed-off-by: Alasdair G Kergon --- drivers/md/dm-crypt.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 4c4408a2602f..9a896e1cb2ea 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -108,7 +108,7 @@ struct crypt_config { struct workqueue_struct *crypt_queue; char *cipher; - char *cipher_mode; + char *cipher_string; struct crypt_iv_operations *iv_gen_ops; union { @@ -1030,7 +1030,7 @@ static void crypt_dtr(struct dm_target *ti) dm_put_device(ti, cc->dev); kzfree(cc->cipher); - kzfree(cc->cipher_mode); + kzfree(cc->cipher_string); /* Must zero key material before freeing */ kzfree(cc); @@ -1050,6 +1050,10 @@ static int crypt_ctr_cipher(struct dm_target *ti, return -EINVAL; } + cc->cipher_string = kstrdup(cipher_in, GFP_KERNEL); + if (!cc->cipher_string) + goto bad_mem; + /* * Legacy dm-crypt cipher specification * cipher-mode-iv:ivopts @@ -1061,12 +1065,6 @@ static int crypt_ctr_cipher(struct dm_target *ti, if (!cc->cipher) goto bad_mem; - if (tmp) { - cc->cipher_mode = kstrdup(tmp, GFP_KERNEL); - if (!cc->cipher_mode) - goto bad_mem; - } - chainmode = strsep(&tmp, "-"); ivopts = strsep(&tmp, "-"); ivmode = strsep(&ivopts, ":"); @@ -1074,10 +1072,11 @@ static int crypt_ctr_cipher(struct dm_target *ti, if (tmp) DMWARN("Ignoring unexpected additional cipher options"); - /* Compatibility mode for old dm-crypt mappings */ + /* + * For compatibility with the original dm-crypt mapping format, if + * only the cipher name is supplied, use cbc-plain. + */ if (!chainmode || (!strcmp(chainmode, "plain") && !ivmode)) { - kfree(cc->cipher_mode); - cc->cipher_mode = kstrdup("cbc-plain", GFP_KERNEL); chainmode = "cbc"; ivmode = "plain"; } @@ -1307,10 +1306,7 @@ static int crypt_status(struct dm_target *ti, status_type_t type, break; case STATUSTYPE_TABLE: - if (cc->cipher_mode) - DMEMIT("%s-%s ", cc->cipher, cc->cipher_mode); - else - DMEMIT("%s ", cc->cipher); + DMEMIT("%s ", cc->cipher_string); if (cc->key_size > 0) { if ((maxlen - sz) < ((cc->key_size << 1) + 1)) @@ -1422,7 +1418,7 @@ static int crypt_iterate_devices(struct dm_target *ti, static struct target_type crypt_target = { .name = "crypt", - .version = {1, 7, 0}, + .version = {1, 8, 0}, .module = THIS_MODULE, .ctr = crypt_ctr, .dtr = crypt_dtr, -- cgit v1.2.1 From c029772125594e31eb1a5ad9e0913724ed9891f2 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Thu, 13 Jan 2011 19:59:53 +0000 Subject: dm crypt: scale to multiple cpus Currently dm-crypt does all the encryption work for a single dm-crypt mapping in a single workqueue. This does not scale well when multiple CPUs are submitting IO at a high rate. The single CPU running the single thread cannot keep up with the encryption and encrypted IO performance tanks. This patch changes the crypto workqueue to be per CPU. This means that as long as the IO submitter (or the interrupt target CPUs for reads) runs on different CPUs the encryption work will be also parallel. To avoid a bottleneck on the IO worker I also changed those to be per-CPU threads. There is still some shared data, so I suspect some bouncing cache lines. But I haven't done a detailed study on that yet. Signed-off-by: Andi Kleen Signed-off-by: Milan Broz Signed-off-by: Alasdair G Kergon --- drivers/md/dm-crypt.c | 254 ++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 196 insertions(+), 58 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 9a896e1cb2ea..50ae6ef83738 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -77,7 +78,6 @@ struct crypt_iv_operations { }; struct iv_essiv_private { - struct crypto_cipher *tfm; struct crypto_hash *hash_tfm; u8 *salt; }; @@ -91,6 +91,22 @@ struct iv_benbi_private { * and encrypts / decrypts at the same time. */ enum flags { DM_CRYPT_SUSPENDED, DM_CRYPT_KEY_VALID }; + +/* + * Duplicated per-CPU state for cipher. + */ +struct crypt_cpu { + struct ablkcipher_request *req; + struct crypto_ablkcipher *tfm; + + /* ESSIV: struct crypto_cipher *essiv_tfm */ + void *iv_private; +}; + +/* + * The fields in here must be read only after initialization, + * changing state should be in crypt_cpu. + */ struct crypt_config { struct dm_dev *dev; sector_t start; @@ -118,6 +134,12 @@ struct crypt_config { sector_t iv_offset; unsigned int iv_size; + /* + * Duplicated per cpu state. Access through + * per_cpu_ptr() only. + */ + struct crypt_cpu __percpu *cpu; + /* * Layout of each crypto request: * @@ -132,9 +154,7 @@ struct crypt_config { * correctly aligned. */ unsigned int dmreq_start; - struct ablkcipher_request *req; - struct crypto_ablkcipher *tfm; unsigned long flags; unsigned int key_size; u8 key[0]; @@ -149,6 +169,19 @@ static struct kmem_cache *_crypt_io_pool; static void clone_init(struct dm_crypt_io *, struct bio *); static void kcryptd_queue_crypt(struct dm_crypt_io *io); +static struct crypt_cpu *this_crypt_config(struct crypt_config *cc) +{ + return this_cpu_ptr(cc->cpu); +} + +/* + * Use this to access cipher attributes that are the same for each CPU. + */ +static struct crypto_ablkcipher *any_tfm(struct crypt_config *cc) +{ + return __this_cpu_ptr(cc->cpu)->tfm; +} + /* * Different IV generation algorithms: * @@ -195,7 +228,8 @@ static int crypt_iv_essiv_init(struct crypt_config *cc) struct iv_essiv_private *essiv = &cc->iv_gen_private.essiv; struct hash_desc desc; struct scatterlist sg; - int err; + struct crypto_cipher *essiv_tfm; + int err, cpu; sg_init_one(&sg, cc->key, cc->key_size); desc.tfm = essiv->hash_tfm; @@ -205,8 +239,16 @@ static int crypt_iv_essiv_init(struct crypt_config *cc) if (err) return err; - return crypto_cipher_setkey(essiv->tfm, essiv->salt, + for_each_possible_cpu(cpu) { + essiv_tfm = per_cpu_ptr(cc->cpu, cpu)->iv_private, + + err = crypto_cipher_setkey(essiv_tfm, essiv->salt, crypto_hash_digestsize(essiv->hash_tfm)); + if (err) + return err; + } + + return 0; } /* Wipe salt and reset key derived from volume key */ @@ -214,24 +256,76 @@ static int crypt_iv_essiv_wipe(struct crypt_config *cc) { struct iv_essiv_private *essiv = &cc->iv_gen_private.essiv; unsigned salt_size = crypto_hash_digestsize(essiv->hash_tfm); + struct crypto_cipher *essiv_tfm; + int cpu, r, err = 0; memset(essiv->salt, 0, salt_size); - return crypto_cipher_setkey(essiv->tfm, essiv->salt, salt_size); + for_each_possible_cpu(cpu) { + essiv_tfm = per_cpu_ptr(cc->cpu, cpu)->iv_private; + r = crypto_cipher_setkey(essiv_tfm, essiv->salt, salt_size); + if (r) + err = r; + } + + return err; +} + +/* Set up per cpu cipher state */ +static struct crypto_cipher *setup_essiv_cpu(struct crypt_config *cc, + struct dm_target *ti, + u8 *salt, unsigned saltsize) +{ + struct crypto_cipher *essiv_tfm; + int err; + + /* Setup the essiv_tfm with the given salt */ + essiv_tfm = crypto_alloc_cipher(cc->cipher, 0, CRYPTO_ALG_ASYNC); + if (IS_ERR(essiv_tfm)) { + ti->error = "Error allocating crypto tfm for ESSIV"; + return essiv_tfm; + } + + if (crypto_cipher_blocksize(essiv_tfm) != + crypto_ablkcipher_ivsize(any_tfm(cc))) { + ti->error = "Block size of ESSIV cipher does " + "not match IV size of block cipher"; + crypto_free_cipher(essiv_tfm); + return ERR_PTR(-EINVAL); + } + + err = crypto_cipher_setkey(essiv_tfm, salt, saltsize); + if (err) { + ti->error = "Failed to set key for ESSIV cipher"; + crypto_free_cipher(essiv_tfm); + return ERR_PTR(err); + } + + return essiv_tfm; } static void crypt_iv_essiv_dtr(struct crypt_config *cc) { + int cpu; + struct crypt_cpu *cpu_cc; + struct crypto_cipher *essiv_tfm; struct iv_essiv_private *essiv = &cc->iv_gen_private.essiv; - crypto_free_cipher(essiv->tfm); - essiv->tfm = NULL; - crypto_free_hash(essiv->hash_tfm); essiv->hash_tfm = NULL; kzfree(essiv->salt); essiv->salt = NULL; + + for_each_possible_cpu(cpu) { + cpu_cc = per_cpu_ptr(cc->cpu, cpu); + essiv_tfm = cpu_cc->iv_private; + + if (essiv_tfm) + crypto_free_cipher(essiv_tfm); + + cpu_cc->iv_private = NULL; + } } static int crypt_iv_essiv_ctr(struct crypt_config *cc, struct dm_target *ti, @@ -240,7 +334,7 @@ static int crypt_iv_essiv_ctr(struct crypt_config *cc, struct dm_target *ti, struct crypto_cipher *essiv_tfm = NULL; struct crypto_hash *hash_tfm = NULL; u8 *salt = NULL; - int err; + int err, cpu; if (!opts) { ti->error = "Digest algorithm missing for ESSIV mode"; @@ -262,30 +356,22 @@ static int crypt_iv_essiv_ctr(struct crypt_config *cc, struct dm_target *ti, goto bad; } - /* Allocate essiv_tfm */ - essiv_tfm = crypto_alloc_cipher(cc->cipher, 0, CRYPTO_ALG_ASYNC); - if (IS_ERR(essiv_tfm)) { - ti->error = "Error allocating crypto tfm for ESSIV"; - err = PTR_ERR(essiv_tfm); - goto bad; - } - if (crypto_cipher_blocksize(essiv_tfm) != - crypto_ablkcipher_ivsize(cc->tfm)) { - ti->error = "Block size of ESSIV cipher does " - "not match IV size of block cipher"; - err = -EINVAL; - goto bad; - } - cc->iv_gen_private.essiv.salt = salt; - cc->iv_gen_private.essiv.tfm = essiv_tfm; cc->iv_gen_private.essiv.hash_tfm = hash_tfm; + for_each_possible_cpu(cpu) { + essiv_tfm = setup_essiv_cpu(cc, ti, salt, + crypto_hash_digestsize(hash_tfm)); + if (IS_ERR(essiv_tfm)) { + crypt_iv_essiv_dtr(cc); + return PTR_ERR(essiv_tfm); + } + per_cpu_ptr(cc->cpu, cpu)->iv_private = essiv_tfm; + } + return 0; bad: - if (essiv_tfm && !IS_ERR(essiv_tfm)) - crypto_free_cipher(essiv_tfm); if (hash_tfm && !IS_ERR(hash_tfm)) crypto_free_hash(hash_tfm); kfree(salt); @@ -294,16 +380,19 @@ bad: static int crypt_iv_essiv_gen(struct crypt_config *cc, u8 *iv, sector_t sector) { + struct crypto_cipher *essiv_tfm = this_crypt_config(cc)->iv_private; + memset(iv, 0, cc->iv_size); *(u64 *)iv = cpu_to_le64(sector); - crypto_cipher_encrypt_one(cc->iv_gen_private.essiv.tfm, iv, iv); + crypto_cipher_encrypt_one(essiv_tfm, iv, iv); + return 0; } static int crypt_iv_benbi_ctr(struct crypt_config *cc, struct dm_target *ti, const char *opts) { - unsigned bs = crypto_ablkcipher_blocksize(cc->tfm); + unsigned bs = crypto_ablkcipher_blocksize(any_tfm(cc)); int log = ilog2(bs); /* we need to calculate how far we must shift the sector count @@ -412,7 +501,7 @@ static int crypt_convert_block(struct crypt_config *cc, dmreq = dmreq_of_req(cc, req); iv = (u8 *)ALIGN((unsigned long)(dmreq + 1), - crypto_ablkcipher_alignmask(cc->tfm) + 1); + crypto_ablkcipher_alignmask(any_tfm(cc)) + 1); dmreq->ctx = ctx; sg_init_table(&dmreq->sg_in, 1); @@ -454,16 +543,19 @@ static int crypt_convert_block(struct crypt_config *cc, static void kcryptd_async_done(struct crypto_async_request *async_req, int error); + static void crypt_alloc_req(struct crypt_config *cc, struct convert_context *ctx) { - if (!cc->req) - cc->req = mempool_alloc(cc->req_pool, GFP_NOIO); - ablkcipher_request_set_tfm(cc->req, cc->tfm); - ablkcipher_request_set_callback(cc->req, CRYPTO_TFM_REQ_MAY_BACKLOG | - CRYPTO_TFM_REQ_MAY_SLEEP, - kcryptd_async_done, - dmreq_of_req(cc, cc->req)); + struct crypt_cpu *this_cc = this_crypt_config(cc); + + if (!this_cc->req) + this_cc->req = mempool_alloc(cc->req_pool, GFP_NOIO); + + ablkcipher_request_set_tfm(this_cc->req, this_cc->tfm); + ablkcipher_request_set_callback(this_cc->req, + CRYPTO_TFM_REQ_MAY_BACKLOG | CRYPTO_TFM_REQ_MAY_SLEEP, + kcryptd_async_done, dmreq_of_req(cc, this_cc->req)); } /* @@ -472,6 +564,7 @@ static void crypt_alloc_req(struct crypt_config *cc, static int crypt_convert(struct crypt_config *cc, struct convert_context *ctx) { + struct crypt_cpu *this_cc = this_crypt_config(cc); int r; atomic_set(&ctx->pending, 1); @@ -483,7 +576,7 @@ static int crypt_convert(struct crypt_config *cc, atomic_inc(&ctx->pending); - r = crypt_convert_block(cc, ctx, cc->req); + r = crypt_convert_block(cc, ctx, this_cc->req); switch (r) { /* async */ @@ -492,7 +585,7 @@ static int crypt_convert(struct crypt_config *cc, INIT_COMPLETION(ctx->restart); /* fall through*/ case -EINPROGRESS: - cc->req = NULL; + this_cc->req = NULL; ctx->sector++; continue; @@ -651,6 +744,9 @@ static void crypt_dec_pending(struct dm_crypt_io *io) * They must be separated as otherwise the final stages could be * starved by new requests which can block in the first stages due * to memory allocation. + * + * The work is done per CPU global for all dm-crypt instances. + * They should not depend on each other and do not block. */ static void crypt_endio(struct bio *clone, int error) { @@ -971,6 +1067,20 @@ static void crypt_encode_key(char *hex, u8 *key, unsigned int size) } } +static int crypt_setkey_allcpus(struct crypt_config *cc) +{ + int cpu, err = 0, r; + + for_each_possible_cpu(cpu) { + r = crypto_ablkcipher_setkey(per_cpu_ptr(cc->cpu, cpu)->tfm, + cc->key, cc->key_size); + if (r) + err = r; + } + + return err; +} + static int crypt_set_key(struct crypt_config *cc, char *key) { /* The key size may not be changed. */ @@ -986,19 +1096,22 @@ static int crypt_set_key(struct crypt_config *cc, char *key) set_bit(DM_CRYPT_KEY_VALID, &cc->flags); - return crypto_ablkcipher_setkey(cc->tfm, cc->key, cc->key_size); + return crypt_setkey_allcpus(cc); } static int crypt_wipe_key(struct crypt_config *cc) { clear_bit(DM_CRYPT_KEY_VALID, &cc->flags); memset(&cc->key, 0, cc->key_size * sizeof(u8)); - return crypto_ablkcipher_setkey(cc->tfm, cc->key, cc->key_size); + + return crypt_setkey_allcpus(cc); } static void crypt_dtr(struct dm_target *ti) { struct crypt_config *cc = ti->private; + struct crypt_cpu *cpu_cc; + int cpu; ti->private = NULL; @@ -1010,6 +1123,15 @@ static void crypt_dtr(struct dm_target *ti) if (cc->crypt_queue) destroy_workqueue(cc->crypt_queue); + if (cc->cpu) + for_each_possible_cpu(cpu) { + cpu_cc = per_cpu_ptr(cc->cpu, cpu); + if (cpu_cc->req) + mempool_free(cpu_cc->req, cc->req_pool); + if (cpu_cc->tfm) + crypto_free_ablkcipher(cpu_cc->tfm); + } + if (cc->bs) bioset_free(cc->bs); @@ -1023,12 +1145,12 @@ static void crypt_dtr(struct dm_target *ti) if (cc->iv_gen_ops && cc->iv_gen_ops->dtr) cc->iv_gen_ops->dtr(cc); - if (cc->tfm && !IS_ERR(cc->tfm)) - crypto_free_ablkcipher(cc->tfm); - if (cc->dev) dm_put_device(ti, cc->dev); + if (cc->cpu) + free_percpu(cc->cpu); + kzfree(cc->cipher); kzfree(cc->cipher_string); @@ -1040,9 +1162,10 @@ static int crypt_ctr_cipher(struct dm_target *ti, char *cipher_in, char *key) { struct crypt_config *cc = ti->private; + struct crypto_ablkcipher *tfm; char *tmp, *cipher, *chainmode, *ivmode, *ivopts; char *cipher_api = NULL; - int ret = -EINVAL; + int cpu, ret = -EINVAL; /* Convert to crypto api definition? */ if (strchr(cipher_in, '(')) { @@ -1072,6 +1195,12 @@ static int crypt_ctr_cipher(struct dm_target *ti, if (tmp) DMWARN("Ignoring unexpected additional cipher options"); + cc->cpu = alloc_percpu(struct crypt_cpu); + if (!cc->cpu) { + ti->error = "Cannot allocate per cpu state"; + goto bad_mem; + } + /* * For compatibility with the original dm-crypt mapping format, if * only the cipher name is supplied, use cbc-plain. @@ -1098,11 +1227,14 @@ static int crypt_ctr_cipher(struct dm_target *ti, } /* Allocate cipher */ - cc->tfm = crypto_alloc_ablkcipher(cipher_api, 0, 0); - if (IS_ERR(cc->tfm)) { - ret = PTR_ERR(cc->tfm); - ti->error = "Error allocating crypto tfm"; - goto bad; + for_each_possible_cpu(cpu) { + tfm = crypto_alloc_ablkcipher(cipher_api, 0, 0); + if (IS_ERR(tfm)) { + ret = PTR_ERR(tfm); + ti->error = "Error allocating crypto tfm"; + goto bad; + } + per_cpu_ptr(cc->cpu, cpu)->tfm = tfm; } /* Initialize and set key */ @@ -1113,7 +1245,7 @@ static int crypt_ctr_cipher(struct dm_target *ti, } /* Initialize IV */ - cc->iv_size = crypto_ablkcipher_ivsize(cc->tfm); + cc->iv_size = crypto_ablkcipher_ivsize(any_tfm(cc)); if (cc->iv_size) /* at least a 64 bit sector number should fit in our buffer */ cc->iv_size = max(cc->iv_size, @@ -1208,9 +1340,9 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) } cc->dmreq_start = sizeof(struct ablkcipher_request); - cc->dmreq_start += crypto_ablkcipher_reqsize(cc->tfm); + cc->dmreq_start += crypto_ablkcipher_reqsize(any_tfm(cc)); cc->dmreq_start = ALIGN(cc->dmreq_start, crypto_tfm_ctx_alignment()); - cc->dmreq_start += crypto_ablkcipher_alignmask(cc->tfm) & + cc->dmreq_start += crypto_ablkcipher_alignmask(any_tfm(cc)) & ~(crypto_tfm_ctx_alignment() - 1); cc->req_pool = mempool_create_kmalloc_pool(MIN_IOS, cc->dmreq_start + @@ -1219,7 +1351,6 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) ti->error = "Cannot allocate crypt request mempool"; goto bad; } - cc->req = NULL; cc->page_pool = mempool_create_page_pool(MIN_POOL_PAGES, 0); if (!cc->page_pool) { @@ -1252,13 +1383,20 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) cc->start = tmpll; ret = -ENOMEM; - cc->io_queue = create_singlethread_workqueue("kcryptd_io"); + cc->io_queue = alloc_workqueue("kcryptd_io", + WQ_NON_REENTRANT| + WQ_MEM_RECLAIM, + 1); if (!cc->io_queue) { ti->error = "Couldn't create kcryptd io queue"; goto bad; } - cc->crypt_queue = create_singlethread_workqueue("kcryptd"); + cc->crypt_queue = alloc_workqueue("kcryptd", + WQ_NON_REENTRANT| + WQ_CPU_INTENSIVE| + WQ_MEM_RECLAIM, + 1); if (!cc->crypt_queue) { ti->error = "Couldn't create kcryptd queue"; goto bad; @@ -1418,7 +1556,7 @@ static int crypt_iterate_devices(struct dm_target *ti, static struct target_type crypt_target = { .name = "crypt", - .version = {1, 8, 0}, + .version = {1, 9, 0}, .module = THIS_MODULE, .ctr = crypt_ctr, .dtr = crypt_dtr, -- cgit v1.2.1 From 20c82538e4f5ede51bc2b4795bc6e5cae772796d Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Thu, 13 Jan 2011 19:59:53 +0000 Subject: dm crypt: use io thread for reads only if mempool exhausted If there is enough memory, code can directly submit bio instead queing this operation in separate thread. Try to alloc bio clone with GFP_NOWAIT and only if it fails use separate queue (map function cannot block here). Signed-off-by: Milan Broz Signed-off-by: Alasdair G Kergon --- drivers/md/dm-crypt.c | 37 +++++++++++++++++++++++-------------- 1 file changed, 23 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 50ae6ef83738..dc4403bcc6a0 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -787,26 +787,30 @@ static void clone_init(struct dm_crypt_io *io, struct bio *clone) clone->bi_destructor = dm_crypt_bio_destructor; } -static void kcryptd_io_read(struct dm_crypt_io *io) +static void kcryptd_unplug(struct crypt_config *cc) +{ + blk_unplug(bdev_get_queue(cc->dev->bdev)); +} + +static int kcryptd_io_read(struct dm_crypt_io *io, gfp_t gfp) { struct crypt_config *cc = io->target->private; struct bio *base_bio = io->base_bio; struct bio *clone; - crypt_inc_pending(io); - /* * The block layer might modify the bvec array, so always * copy the required bvecs because we need the original * one in order to decrypt the whole bio data *afterwards*. */ - clone = bio_alloc_bioset(GFP_NOIO, bio_segments(base_bio), cc->bs); - if (unlikely(!clone)) { - io->error = -ENOMEM; - crypt_dec_pending(io); - return; + clone = bio_alloc_bioset(gfp, bio_segments(base_bio), cc->bs); + if (!clone) { + kcryptd_unplug(cc); + return 1; } + crypt_inc_pending(io); + clone_init(io, clone); clone->bi_idx = 0; clone->bi_vcnt = bio_segments(base_bio); @@ -816,6 +820,7 @@ static void kcryptd_io_read(struct dm_crypt_io *io) sizeof(struct bio_vec) * clone->bi_vcnt); generic_make_request(clone); + return 0; } static void kcryptd_io_write(struct dm_crypt_io *io) @@ -828,9 +833,12 @@ static void kcryptd_io(struct work_struct *work) { struct dm_crypt_io *io = container_of(work, struct dm_crypt_io, work); - if (bio_data_dir(io->base_bio) == READ) - kcryptd_io_read(io); - else + if (bio_data_dir(io->base_bio) == READ) { + crypt_inc_pending(io); + if (kcryptd_io_read(io, GFP_NOIO)) + io->error = -ENOMEM; + crypt_dec_pending(io); + } else kcryptd_io_write(io); } @@ -1424,9 +1432,10 @@ static int crypt_map(struct dm_target *ti, struct bio *bio, io = crypt_io_alloc(ti, bio, dm_target_offset(ti, bio->bi_sector)); - if (bio_data_dir(io->base_bio) == READ) - kcryptd_queue_io(io); - else + if (bio_data_dir(io->base_bio) == READ) { + if (kcryptd_io_read(io, GFP_NOWAIT)) + kcryptd_queue_io(io); + } else kcryptd_queue_crypt(io); return DM_MAPIO_SUBMITTED; -- cgit v1.2.1 From 2dc5327d3acb3340ab6fa3981401b076b78a51f4 Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Thu, 13 Jan 2011 19:59:54 +0000 Subject: dm crypt: add post iv call to iv generator IV (initialisation vector) can in principle depend not only on sector but also on plaintext data (or other attributes). Change IV generator interface to work directly with dmreq structure to allow such dependence in generator. Also add post() function which is called after the crypto operation. This allows tricky modification of decrypted data or IV internals. In asynchronous mode the post() can be called after ctx->sector count was increased so it is needed to add iv_sector copy directly to dmreq structure. (N.B. dmreq always include only one sector in scatterlists) Signed-off-by: Milan Broz Signed-off-by: Alasdair G Kergon --- drivers/md/dm-crypt.c | 48 +++++++++++++++++++++++++++++++++++------------- 1 file changed, 35 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index dc4403bcc6a0..e0ebe685be6a 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -64,6 +64,7 @@ struct dm_crypt_request { struct convert_context *ctx; struct scatterlist sg_in; struct scatterlist sg_out; + sector_t iv_sector; }; struct crypt_config; @@ -74,7 +75,10 @@ struct crypt_iv_operations { void (*dtr)(struct crypt_config *cc); int (*init)(struct crypt_config *cc); int (*wipe)(struct crypt_config *cc); - int (*generator)(struct crypt_config *cc, u8 *iv, sector_t sector); + int (*generator)(struct crypt_config *cc, u8 *iv, + struct dm_crypt_request *dmreq); + int (*post)(struct crypt_config *cc, u8 *iv, + struct dm_crypt_request *dmreq); }; struct iv_essiv_private { @@ -168,6 +172,7 @@ static struct kmem_cache *_crypt_io_pool; static void clone_init(struct dm_crypt_io *, struct bio *); static void kcryptd_queue_crypt(struct dm_crypt_io *io); +static u8 *iv_of_dmreq(struct crypt_config *cc, struct dm_crypt_request *dmreq); static struct crypt_cpu *this_crypt_config(struct crypt_config *cc) { @@ -205,19 +210,20 @@ static struct crypto_ablkcipher *any_tfm(struct crypt_config *cc) * http://article.gmane.org/gmane.linux.kernel.device-mapper.dm-crypt/454 */ -static int crypt_iv_plain_gen(struct crypt_config *cc, u8 *iv, sector_t sector) +static int crypt_iv_plain_gen(struct crypt_config *cc, u8 *iv, + struct dm_crypt_request *dmreq) { memset(iv, 0, cc->iv_size); - *(u32 *)iv = cpu_to_le32(sector & 0xffffffff); + *(u32 *)iv = cpu_to_le32(dmreq->iv_sector & 0xffffffff); return 0; } static int crypt_iv_plain64_gen(struct crypt_config *cc, u8 *iv, - sector_t sector) + struct dm_crypt_request *dmreq) { memset(iv, 0, cc->iv_size); - *(u64 *)iv = cpu_to_le64(sector); + *(u64 *)iv = cpu_to_le64(dmreq->iv_sector); return 0; } @@ -378,12 +384,13 @@ bad: return err; } -static int crypt_iv_essiv_gen(struct crypt_config *cc, u8 *iv, sector_t sector) +static int crypt_iv_essiv_gen(struct crypt_config *cc, u8 *iv, + struct dm_crypt_request *dmreq) { struct crypto_cipher *essiv_tfm = this_crypt_config(cc)->iv_private; memset(iv, 0, cc->iv_size); - *(u64 *)iv = cpu_to_le64(sector); + *(u64 *)iv = cpu_to_le64(dmreq->iv_sector); crypto_cipher_encrypt_one(essiv_tfm, iv, iv); return 0; @@ -417,19 +424,21 @@ static void crypt_iv_benbi_dtr(struct crypt_config *cc) { } -static int crypt_iv_benbi_gen(struct crypt_config *cc, u8 *iv, sector_t sector) +static int crypt_iv_benbi_gen(struct crypt_config *cc, u8 *iv, + struct dm_crypt_request *dmreq) { __be64 val; memset(iv, 0, cc->iv_size - sizeof(u64)); /* rest is cleared below */ - val = cpu_to_be64(((u64)sector << cc->iv_gen_private.benbi.shift) + 1); + val = cpu_to_be64(((u64)dmreq->iv_sector << cc->iv_gen_private.benbi.shift) + 1); put_unaligned(val, (__be64 *)(iv + cc->iv_size - sizeof(u64))); return 0; } -static int crypt_iv_null_gen(struct crypt_config *cc, u8 *iv, sector_t sector) +static int crypt_iv_null_gen(struct crypt_config *cc, u8 *iv, + struct dm_crypt_request *dmreq) { memset(iv, 0, cc->iv_size); @@ -489,6 +498,13 @@ static struct ablkcipher_request *req_of_dmreq(struct crypt_config *cc, return (struct ablkcipher_request *)((char *)dmreq - cc->dmreq_start); } +static u8 *iv_of_dmreq(struct crypt_config *cc, + struct dm_crypt_request *dmreq) +{ + return (u8 *)ALIGN((unsigned long)(dmreq + 1), + crypto_ablkcipher_alignmask(any_tfm(cc)) + 1); +} + static int crypt_convert_block(struct crypt_config *cc, struct convert_context *ctx, struct ablkcipher_request *req) @@ -500,9 +516,9 @@ static int crypt_convert_block(struct crypt_config *cc, int r = 0; dmreq = dmreq_of_req(cc, req); - iv = (u8 *)ALIGN((unsigned long)(dmreq + 1), - crypto_ablkcipher_alignmask(any_tfm(cc)) + 1); + iv = iv_of_dmreq(cc, dmreq); + dmreq->iv_sector = ctx->sector; dmreq->ctx = ctx; sg_init_table(&dmreq->sg_in, 1); sg_set_page(&dmreq->sg_in, bv_in->bv_page, 1 << SECTOR_SHIFT, @@ -525,7 +541,7 @@ static int crypt_convert_block(struct crypt_config *cc, } if (cc->iv_gen_ops) { - r = cc->iv_gen_ops->generator(cc, iv, ctx->sector); + r = cc->iv_gen_ops->generator(cc, iv, dmreq); if (r < 0) return r; } @@ -538,6 +554,9 @@ static int crypt_convert_block(struct crypt_config *cc, else r = crypto_ablkcipher_decrypt(req); + if (!r && cc->iv_gen_ops && cc->iv_gen_ops->post) + r = cc->iv_gen_ops->post(cc, iv, dmreq); + return r; } @@ -1005,6 +1024,9 @@ static void kcryptd_async_done(struct crypto_async_request *async_req, return; } + if (!error && cc->iv_gen_ops && cc->iv_gen_ops->post) + error = cc->iv_gen_ops->post(cc, iv_of_dmreq(cc, dmreq), dmreq); + mempool_free(req_of_dmreq(cc, dmreq), cc->req_pool); if (!atomic_dec_and_test(&ctx->pending)) -- cgit v1.2.1 From d1f9642381847e2b94caa34c3533211cf36ffcf4 Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Thu, 13 Jan 2011 19:59:54 +0000 Subject: dm crypt: add multi key capability This patch adds generic multikey handling to be used in following patch for Loop-AES mode compatibility. This patch extends mapping table to optional keycount and implements generic multi-key capability. With more keys defined the string is divided into several sections and these are used for tfms. The tfm is used according to sector offset (sector 0->tfm[0], sector 1->tfm[1], sector N->tfm[N modulo keycount]) (only power of two values supported for keycount here). Because of tfms per-cpu allocation, this mode can be take a lot of memory on large smp systems. Signed-off-by: Milan Broz Signed-off-by: Alasdair G Kergon Cc: Max Vozeler --- drivers/md/dm-crypt.c | 85 ++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 64 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index e0ebe685be6a..b8b9267c4dbb 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -101,10 +101,9 @@ enum flags { DM_CRYPT_SUSPENDED, DM_CRYPT_KEY_VALID }; */ struct crypt_cpu { struct ablkcipher_request *req; - struct crypto_ablkcipher *tfm; - /* ESSIV: struct crypto_cipher *essiv_tfm */ void *iv_private; + struct crypto_ablkcipher *tfms[0]; }; /* @@ -143,6 +142,7 @@ struct crypt_config { * per_cpu_ptr() only. */ struct crypt_cpu __percpu *cpu; + unsigned tfms_count; /* * Layout of each crypto request: @@ -161,6 +161,7 @@ struct crypt_config { unsigned long flags; unsigned int key_size; + unsigned int key_parts; u8 key[0]; }; @@ -184,7 +185,7 @@ static struct crypt_cpu *this_crypt_config(struct crypt_config *cc) */ static struct crypto_ablkcipher *any_tfm(struct crypt_config *cc) { - return __this_cpu_ptr(cc->cpu)->tfm; + return __this_cpu_ptr(cc->cpu)->tfms[0]; } /* @@ -567,11 +568,12 @@ static void crypt_alloc_req(struct crypt_config *cc, struct convert_context *ctx) { struct crypt_cpu *this_cc = this_crypt_config(cc); + unsigned key_index = ctx->sector & (cc->tfms_count - 1); if (!this_cc->req) this_cc->req = mempool_alloc(cc->req_pool, GFP_NOIO); - ablkcipher_request_set_tfm(this_cc->req, this_cc->tfm); + ablkcipher_request_set_tfm(this_cc->req, this_cc->tfms[key_index]); ablkcipher_request_set_callback(this_cc->req, CRYPTO_TFM_REQ_MAY_BACKLOG | CRYPTO_TFM_REQ_MAY_SLEEP, kcryptd_async_done, dmreq_of_req(cc, this_cc->req)); @@ -1097,15 +1099,48 @@ static void crypt_encode_key(char *hex, u8 *key, unsigned int size) } } +static void crypt_free_tfms(struct crypt_config *cc, int cpu) +{ + struct crypt_cpu *cpu_cc = per_cpu_ptr(cc->cpu, cpu); + unsigned i; + + for (i = 0; i < cc->tfms_count; i++) + if (cpu_cc->tfms[i] && !IS_ERR(cpu_cc->tfms[i])) { + crypto_free_ablkcipher(cpu_cc->tfms[i]); + cpu_cc->tfms[i] = NULL; + } +} + +static int crypt_alloc_tfms(struct crypt_config *cc, int cpu, char *ciphermode) +{ + struct crypt_cpu *cpu_cc = per_cpu_ptr(cc->cpu, cpu); + unsigned i; + int err; + + for (i = 0; i < cc->tfms_count; i++) { + cpu_cc->tfms[i] = crypto_alloc_ablkcipher(ciphermode, 0, 0); + if (IS_ERR(cpu_cc->tfms[i])) { + err = PTR_ERR(cpu_cc->tfms[i]); + crypt_free_tfms(cc, cpu); + return err; + } + } + + return 0; +} + static int crypt_setkey_allcpus(struct crypt_config *cc) { - int cpu, err = 0, r; + unsigned subkey_size = cc->key_size >> ilog2(cc->tfms_count); + int cpu, err = 0, i, r; for_each_possible_cpu(cpu) { - r = crypto_ablkcipher_setkey(per_cpu_ptr(cc->cpu, cpu)->tfm, - cc->key, cc->key_size); - if (r) - err = r; + for (i = 0; i < cc->tfms_count; i++) { + r = crypto_ablkcipher_setkey(per_cpu_ptr(cc->cpu, cpu)->tfms[i], + cc->key + (i * subkey_size), subkey_size); + if (r) + err = r; + } } return err; @@ -1158,8 +1193,7 @@ static void crypt_dtr(struct dm_target *ti) cpu_cc = per_cpu_ptr(cc->cpu, cpu); if (cpu_cc->req) mempool_free(cpu_cc->req, cc->req_pool); - if (cpu_cc->tfm) - crypto_free_ablkcipher(cpu_cc->tfm); + crypt_free_tfms(cc, cpu); } if (cc->bs) @@ -1192,8 +1226,7 @@ static int crypt_ctr_cipher(struct dm_target *ti, char *cipher_in, char *key) { struct crypt_config *cc = ti->private; - struct crypto_ablkcipher *tfm; - char *tmp, *cipher, *chainmode, *ivmode, *ivopts; + char *tmp, *cipher, *chainmode, *ivmode, *ivopts, *keycount; char *cipher_api = NULL; int cpu, ret = -EINVAL; @@ -1209,10 +1242,20 @@ static int crypt_ctr_cipher(struct dm_target *ti, /* * Legacy dm-crypt cipher specification - * cipher-mode-iv:ivopts + * cipher[:keycount]-mode-iv:ivopts */ tmp = cipher_in; - cipher = strsep(&tmp, "-"); + keycount = strsep(&tmp, "-"); + cipher = strsep(&keycount, ":"); + + if (!keycount) + cc->tfms_count = 1; + else if (sscanf(keycount, "%u", &cc->tfms_count) != 1 || + !is_power_of_2(cc->tfms_count)) { + ti->error = "Bad cipher key count specification"; + return -EINVAL; + } + cc->key_parts = cc->tfms_count; cc->cipher = kstrdup(cipher, GFP_KERNEL); if (!cc->cipher) @@ -1225,7 +1268,9 @@ static int crypt_ctr_cipher(struct dm_target *ti, if (tmp) DMWARN("Ignoring unexpected additional cipher options"); - cc->cpu = alloc_percpu(struct crypt_cpu); + cc->cpu = __alloc_percpu(sizeof(*(cc->cpu)) + + cc->tfms_count * sizeof(*(cc->cpu->tfms)), + __alignof__(struct crypt_cpu)); if (!cc->cpu) { ti->error = "Cannot allocate per cpu state"; goto bad_mem; @@ -1258,13 +1303,11 @@ static int crypt_ctr_cipher(struct dm_target *ti, /* Allocate cipher */ for_each_possible_cpu(cpu) { - tfm = crypto_alloc_ablkcipher(cipher_api, 0, 0); - if (IS_ERR(tfm)) { - ret = PTR_ERR(tfm); + ret = crypt_alloc_tfms(cc, cpu, cipher_api); + if (ret < 0) { ti->error = "Error allocating crypto tfm"; goto bad; } - per_cpu_ptr(cc->cpu, cpu)->tfm = tfm; } /* Initialize and set key */ @@ -1587,7 +1630,7 @@ static int crypt_iterate_devices(struct dm_target *ti, static struct target_type crypt_target = { .name = "crypt", - .version = {1, 9, 0}, + .version = {1, 10, 0}, .module = THIS_MODULE, .ctr = crypt_ctr, .dtr = crypt_dtr, -- cgit v1.2.1 From 34745785937a2003c144c0d4802fa637470d87af Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Thu, 13 Jan 2011 19:59:55 +0000 Subject: dm crypt: add loop aes iv generator This patch adds a compatible implementation of the block chaining mode used by the Loop-AES block device encryption system (http://loop-aes.sourceforge.net/) designed by Jari Ruusu. It operates on full 512 byte sectors and uses CBC with an IV derived from the sector number, the data and optionally extra IV seed. This means that after CBC decryption the first block of sector must be tweaked according to decrypted data. Loop-AES can use three encryption schemes: version 1: is plain aes-cbc mode (already compatible) version 2: uses 64 multikey scheme with own IV generator version 3: the same as version 2 with additional IV seed (it uses 65 keys, last key is used as IV seed) The IV generator is here named lmk (Loop-AES multikey) and for the cipher specification looks like: aes:64-cbc-lmk Version 2 and 3 is recognised according to length of provided multi-key string (which is just hexa encoded "raw key" used in original Loop-AES ioctl). Configuration of the device and decoding key string will be done in userspace (cryptsetup). (Loop-AES stores keys in gpg encrypted file, raw keys are output of simple hashing of lines in this file). Based on an implementation by Max Vozeler: http://article.gmane.org/gmane.linux.kernel.cryptoapi/3752/ Signed-off-by: Milan Broz Signed-off-by: Alasdair G Kergon CC: Max Vozeler --- drivers/md/dm-crypt.c | 193 +++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 192 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index b8b9267c4dbb..4e054bd91664 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -23,6 +23,9 @@ #include #include #include +#include +#include +#include #include @@ -90,6 +93,12 @@ struct iv_benbi_private { int shift; }; +#define LMK_SEED_SIZE 64 /* hash + 0 */ +struct iv_lmk_private { + struct crypto_shash *hash_tfm; + u8 *seed; +}; + /* * Crypt: maps a linear range of a block device * and encrypts / decrypts at the same time. @@ -133,6 +142,7 @@ struct crypt_config { union { struct iv_essiv_private essiv; struct iv_benbi_private benbi; + struct iv_lmk_private lmk; } iv_gen_private; sector_t iv_offset; unsigned int iv_size; @@ -207,6 +217,20 @@ static struct crypto_ablkcipher *any_tfm(struct crypt_config *cc) * null: the initial vector is always zero. Provides compatibility with * obsolete loop_fish2 devices. Do not use for new devices. * + * lmk: Compatible implementation of the block chaining mode used + * by the Loop-AES block device encryption system + * designed by Jari Ruusu. See http://loop-aes.sourceforge.net/ + * It operates on full 512 byte sectors and uses CBC + * with an IV derived from the sector number, the data and + * optionally extra IV seed. + * This means that after decryption the first block + * of sector must be tweaked according to decrypted data. + * Loop-AES can use three encryption schemes: + * version 1: is plain aes-cbc mode + * version 2: uses 64 multikey scheme with lmk IV generator + * version 3: the same as version 2 with additional IV seed + * (it uses 65 keys, last key is used as IV seed) + * * plumb: unimplemented, see: * http://article.gmane.org/gmane.linux.kernel.device-mapper.dm-crypt/454 */ @@ -446,6 +470,156 @@ static int crypt_iv_null_gen(struct crypt_config *cc, u8 *iv, return 0; } +static void crypt_iv_lmk_dtr(struct crypt_config *cc) +{ + struct iv_lmk_private *lmk = &cc->iv_gen_private.lmk; + + if (lmk->hash_tfm && !IS_ERR(lmk->hash_tfm)) + crypto_free_shash(lmk->hash_tfm); + lmk->hash_tfm = NULL; + + kzfree(lmk->seed); + lmk->seed = NULL; +} + +static int crypt_iv_lmk_ctr(struct crypt_config *cc, struct dm_target *ti, + const char *opts) +{ + struct iv_lmk_private *lmk = &cc->iv_gen_private.lmk; + + lmk->hash_tfm = crypto_alloc_shash("md5", 0, 0); + if (IS_ERR(lmk->hash_tfm)) { + ti->error = "Error initializing LMK hash"; + return PTR_ERR(lmk->hash_tfm); + } + + /* No seed in LMK version 2 */ + if (cc->key_parts == cc->tfms_count) { + lmk->seed = NULL; + return 0; + } + + lmk->seed = kzalloc(LMK_SEED_SIZE, GFP_KERNEL); + if (!lmk->seed) { + crypt_iv_lmk_dtr(cc); + ti->error = "Error kmallocing seed storage in LMK"; + return -ENOMEM; + } + + return 0; +} + +static int crypt_iv_lmk_init(struct crypt_config *cc) +{ + struct iv_lmk_private *lmk = &cc->iv_gen_private.lmk; + int subkey_size = cc->key_size / cc->key_parts; + + /* LMK seed is on the position of LMK_KEYS + 1 key */ + if (lmk->seed) + memcpy(lmk->seed, cc->key + (cc->tfms_count * subkey_size), + crypto_shash_digestsize(lmk->hash_tfm)); + + return 0; +} + +static int crypt_iv_lmk_wipe(struct crypt_config *cc) +{ + struct iv_lmk_private *lmk = &cc->iv_gen_private.lmk; + + if (lmk->seed) + memset(lmk->seed, 0, LMK_SEED_SIZE); + + return 0; +} + +static int crypt_iv_lmk_one(struct crypt_config *cc, u8 *iv, + struct dm_crypt_request *dmreq, + u8 *data) +{ + struct iv_lmk_private *lmk = &cc->iv_gen_private.lmk; + struct { + struct shash_desc desc; + char ctx[crypto_shash_descsize(lmk->hash_tfm)]; + } sdesc; + struct md5_state md5state; + u32 buf[4]; + int i, r; + + sdesc.desc.tfm = lmk->hash_tfm; + sdesc.desc.flags = CRYPTO_TFM_REQ_MAY_SLEEP; + + r = crypto_shash_init(&sdesc.desc); + if (r) + return r; + + if (lmk->seed) { + r = crypto_shash_update(&sdesc.desc, lmk->seed, LMK_SEED_SIZE); + if (r) + return r; + } + + /* Sector is always 512B, block size 16, add data of blocks 1-31 */ + r = crypto_shash_update(&sdesc.desc, data + 16, 16 * 31); + if (r) + return r; + + /* Sector is cropped to 56 bits here */ + buf[0] = cpu_to_le32(dmreq->iv_sector & 0xFFFFFFFF); + buf[1] = cpu_to_le32((((u64)dmreq->iv_sector >> 32) & 0x00FFFFFF) | 0x80000000); + buf[2] = cpu_to_le32(4024); + buf[3] = 0; + r = crypto_shash_update(&sdesc.desc, (u8 *)buf, sizeof(buf)); + if (r) + return r; + + /* No MD5 padding here */ + r = crypto_shash_export(&sdesc.desc, &md5state); + if (r) + return r; + + for (i = 0; i < MD5_HASH_WORDS; i++) + __cpu_to_le32s(&md5state.hash[i]); + memcpy(iv, &md5state.hash, cc->iv_size); + + return 0; +} + +static int crypt_iv_lmk_gen(struct crypt_config *cc, u8 *iv, + struct dm_crypt_request *dmreq) +{ + u8 *src; + int r = 0; + + if (bio_data_dir(dmreq->ctx->bio_in) == WRITE) { + src = kmap_atomic(sg_page(&dmreq->sg_in), KM_USER0); + r = crypt_iv_lmk_one(cc, iv, dmreq, src + dmreq->sg_in.offset); + kunmap_atomic(src, KM_USER0); + } else + memset(iv, 0, cc->iv_size); + + return r; +} + +static int crypt_iv_lmk_post(struct crypt_config *cc, u8 *iv, + struct dm_crypt_request *dmreq) +{ + u8 *dst; + int r; + + if (bio_data_dir(dmreq->ctx->bio_in) == WRITE) + return 0; + + dst = kmap_atomic(sg_page(&dmreq->sg_out), KM_USER0); + r = crypt_iv_lmk_one(cc, iv, dmreq, dst + dmreq->sg_out.offset); + + /* Tweak the first block of plaintext sector */ + if (!r) + crypto_xor(dst + dmreq->sg_out.offset, iv, cc->iv_size); + + kunmap_atomic(dst, KM_USER0); + return r; +} + static struct crypt_iv_operations crypt_iv_plain_ops = { .generator = crypt_iv_plain_gen }; @@ -472,6 +646,15 @@ static struct crypt_iv_operations crypt_iv_null_ops = { .generator = crypt_iv_null_gen }; +static struct crypt_iv_operations crypt_iv_lmk_ops = { + .ctr = crypt_iv_lmk_ctr, + .dtr = crypt_iv_lmk_dtr, + .init = crypt_iv_lmk_init, + .wipe = crypt_iv_lmk_wipe, + .generator = crypt_iv_lmk_gen, + .post = crypt_iv_lmk_post +}; + static void crypt_convert_init(struct crypt_config *cc, struct convert_context *ctx, struct bio *bio_out, struct bio *bio_in, @@ -1341,7 +1524,15 @@ static int crypt_ctr_cipher(struct dm_target *ti, cc->iv_gen_ops = &crypt_iv_benbi_ops; else if (strcmp(ivmode, "null") == 0) cc->iv_gen_ops = &crypt_iv_null_ops; - else { + else if (strcmp(ivmode, "lmk") == 0) { + cc->iv_gen_ops = &crypt_iv_lmk_ops; + /* Version 2 and 3 is recognised according + * to length of provided multi-key string. + * If present (version 3), last key is used as IV seed. + */ + if (cc->key_size % cc->key_parts) + cc->key_parts++; + } else { ret = -EINVAL; ti->error = "Invalid IV mode"; goto bad; -- cgit v1.2.1 From 810b492375f4aed5ce222982054adc0394a4bd33 Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Thu, 13 Jan 2011 19:59:55 +0000 Subject: dm ioctl: suppress needless warning messages The device-mapper should not send warning messages to syslog if a device is not found. This can be done by userspace according to the returned dm-ioctl error code. So move these messages to debug level and use rate limiting to not flood syslog. Signed-off-by: Milan Broz Signed-off-by: Alasdair G Kergon --- drivers/md/dm-ioctl.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index f3481d922206..6d12775a1061 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -779,7 +779,7 @@ static int dev_remove(struct dm_ioctl *param, size_t param_size) hc = __find_device_hash_cell(param); if (!hc) { - DMWARN("device doesn't appear to be in the dev hash table."); + DMDEBUG_LIMIT("device doesn't appear to be in the dev hash table."); up_write(&_hash_lock); return -ENXIO; } @@ -791,7 +791,7 @@ static int dev_remove(struct dm_ioctl *param, size_t param_size) */ r = dm_lock_for_deletion(md); if (r) { - DMWARN("unable to remove open device %s", hc->name); + DMDEBUG_LIMIT("unable to remove open device %s", hc->name); up_write(&_hash_lock); dm_put(md); return r; @@ -938,7 +938,7 @@ static int do_resume(struct dm_ioctl *param) hc = __find_device_hash_cell(param); if (!hc) { - DMWARN("device doesn't appear to be in the dev hash table."); + DMDEBUG_LIMIT("device doesn't appear to be in the dev hash table."); up_write(&_hash_lock); return -ENXIO; } @@ -1265,7 +1265,7 @@ static int table_clear(struct dm_ioctl *param, size_t param_size) hc = __find_device_hash_cell(param); if (!hc) { - DMWARN("device doesn't appear to be in the dev hash table."); + DMDEBUG_LIMIT("device doesn't appear to be in the dev hash table."); up_write(&_hash_lock); return -ENXIO; } -- cgit v1.2.1 From fecec20e55ec117a09857ac1a455e2e6e2f17df4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 13 Jan 2011 19:59:56 +0000 Subject: dm snapshot: remove unused dm_snapshot queued_bios_work dm_snapshot->queued_bios_work isn't used. Remove ->queued_bios[_work] from dm_snapshot structure, the flush_queued_bios work function and ksnapd workqueue. The DM snapshot changes that were going to use the ksnapd workqueue were either superseded (fix for origin write races) or never completed (deallocation of invalid snapshot's memory via workqueue). Signed-off-by: Tejun Heo Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-snap.c | 38 -------------------------------------- 1 file changed, 38 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index 53cf79d8bcbc..0f47698beafa 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -19,7 +19,6 @@ #include #include #include -#include #include "dm-exception-store.h" @@ -106,10 +105,6 @@ struct dm_snapshot { struct dm_kcopyd_client *kcopyd_client; - /* Queue of snapshot writes for ksnapd to flush */ - struct bio_list queued_bios; - struct work_struct queued_bios_work; - /* Wait for events based on state_bits */ unsigned long state_bits; @@ -160,9 +155,6 @@ struct dm_dev *dm_snap_cow(struct dm_snapshot *s) } EXPORT_SYMBOL(dm_snap_cow); -static struct workqueue_struct *ksnapd; -static void flush_queued_bios(struct work_struct *work); - static sector_t chunk_to_sector(struct dm_exception_store *store, chunk_t chunk) { @@ -1153,9 +1145,6 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) spin_lock_init(&s->tracked_chunk_lock); - bio_list_init(&s->queued_bios); - INIT_WORK(&s->queued_bios_work, flush_queued_bios); - ti->private = s; ti->num_flush_requests = num_flush_requests; @@ -1279,8 +1268,6 @@ static void snapshot_dtr(struct dm_target *ti) struct dm_snapshot *s = ti->private; struct dm_snapshot *snap_src = NULL, *snap_dest = NULL; - flush_workqueue(ksnapd); - down_read(&_origins_lock); /* Check whether exception handover must be cancelled */ (void) __find_snapshots_sharing_cow(s, &snap_src, &snap_dest, NULL); @@ -1342,20 +1329,6 @@ static void flush_bios(struct bio *bio) } } -static void flush_queued_bios(struct work_struct *work) -{ - struct dm_snapshot *s = - container_of(work, struct dm_snapshot, queued_bios_work); - struct bio *queued_bios; - unsigned long flags; - - spin_lock_irqsave(&s->pe_lock, flags); - queued_bios = bio_list_get(&s->queued_bios); - spin_unlock_irqrestore(&s->pe_lock, flags); - - flush_bios(queued_bios); -} - static int do_origin(struct dm_dev *origin, struct bio *bio); /* @@ -2291,17 +2264,8 @@ static int __init dm_snapshot_init(void) goto bad_tracked_chunk_cache; } - ksnapd = create_singlethread_workqueue("ksnapd"); - if (!ksnapd) { - DMERR("Failed to create ksnapd workqueue."); - r = -ENOMEM; - goto bad_pending_pool; - } - return 0; -bad_pending_pool: - kmem_cache_destroy(tracked_chunk_cache); bad_tracked_chunk_cache: kmem_cache_destroy(pending_cache); bad_pending_cache: @@ -2322,8 +2286,6 @@ bad_register_snapshot_target: static void __exit dm_snapshot_exit(void) { - destroy_workqueue(ksnapd); - dm_unregister_target(&snapshot_target); dm_unregister_target(&origin_target); dm_unregister_target(&merge_target); -- cgit v1.2.1 From d5ffa387e24646cb1cb55d80fd0f182a00e0edb7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 13 Jan 2011 19:59:56 +0000 Subject: dm: dont use flush_scheduled_work flush_scheduled_work() is being deprecated. Flush the used work directly instead. In all dm targets, the only work which uses system_wq is ->trigger_event. Signed-off-by: Tejun Heo Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-mpath.c | 2 +- drivers/md/dm-raid1.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 406091f9692b..fcc59c3f756e 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -920,7 +920,7 @@ static void flush_multipath_work(struct multipath *m) flush_workqueue(kmpath_handlerd); multipath_wait_for_pg_init_completion(m); flush_workqueue(kmultipathd); - flush_scheduled_work(); + flush_work_sync(&m->trigger_event); } static void multipath_dtr(struct dm_target *ti) diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index c87756eb7a21..0d58b6f875cc 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1138,7 +1138,7 @@ static void mirror_dtr(struct dm_target *ti) del_timer_sync(&ms->timer); flush_workqueue(ms->kmirrord_wq); - flush_scheduled_work(); + flush_work_sync(&ms->trigger_event); dm_kcopyd_client_destroy(ms->kcopyd_client); destroy_workqueue(ms->kmirrord_wq); free_context(ms, ti, ms->nr_mirrors); -- cgit v1.2.1 From f521f074abe7b3990f5df65482cdc3d851b80665 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 13 Jan 2011 19:59:57 +0000 Subject: dm stripe: switch from local workqueue to system_wq kstriped only serves sc->kstriped_ws which runs dm_table_event(). This doesn't need to be executed from an ordered workqueue w/ rescuer. Drop kstriped and use the system_wq instead. While at it, rename kstriped_ws to trigger_event so that it's consistent with other dm modules. Signed-off-by: Tejun Heo Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-stripe.c | 27 +++++++-------------------- 1 file changed, 7 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c index f0371b4c4fbf..dddfa14f2982 100644 --- a/drivers/md/dm-stripe.c +++ b/drivers/md/dm-stripe.c @@ -39,23 +39,20 @@ struct stripe_c { struct dm_target *ti; /* Work struct used for triggering events*/ - struct work_struct kstriped_ws; + struct work_struct trigger_event; struct stripe stripe[0]; }; -static struct workqueue_struct *kstriped; - /* * An event is triggered whenever a drive * drops out of a stripe volume. */ static void trigger_event(struct work_struct *work) { - struct stripe_c *sc = container_of(work, struct stripe_c, kstriped_ws); - + struct stripe_c *sc = container_of(work, struct stripe_c, + trigger_event); dm_table_event(sc->ti->table); - } static inline struct stripe_c *alloc_context(unsigned int stripes) @@ -160,7 +157,7 @@ static int stripe_ctr(struct dm_target *ti, unsigned int argc, char **argv) return -ENOMEM; } - INIT_WORK(&sc->kstriped_ws, trigger_event); + INIT_WORK(&sc->trigger_event, trigger_event); /* Set pointer to dm target; used in trigger_event */ sc->ti = ti; @@ -211,7 +208,7 @@ static void stripe_dtr(struct dm_target *ti) for (i = 0; i < sc->stripes; i++) dm_put_device(ti, sc->stripe[i].dev); - flush_workqueue(kstriped); + flush_work_sync(&sc->trigger_event); kfree(sc); } @@ -367,7 +364,7 @@ static int stripe_end_io(struct dm_target *ti, struct bio *bio, atomic_inc(&(sc->stripe[i].error_count)); if (atomic_read(&(sc->stripe[i].error_count)) < DM_IO_ERROR_THRESHOLD) - queue_work(kstriped, &sc->kstriped_ws); + schedule_work(&sc->trigger_event); } return error; @@ -401,7 +398,7 @@ static void stripe_io_hints(struct dm_target *ti, static struct target_type stripe_target = { .name = "striped", - .version = {1, 3, 0}, + .version = {1, 3, 1}, .module = THIS_MODULE, .ctr = stripe_ctr, .dtr = stripe_dtr, @@ -422,20 +419,10 @@ int __init dm_stripe_init(void) return r; } - kstriped = create_singlethread_workqueue("kstriped"); - if (!kstriped) { - DMERR("failed to create workqueue kstriped"); - dm_unregister_target(&stripe_target); - return -ENOMEM; - } - return r; } void dm_stripe_exit(void) { dm_unregister_target(&stripe_target); - destroy_workqueue(kstriped); - - return; } -- cgit v1.2.1 From 4d4d66ab5322fa9b0f51842a76139387a40e1ce9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 13 Jan 2011 19:59:57 +0000 Subject: dm: convert workqueues to alloc_ordered Convert all create[_singlethread]_work() users to the new alloc[_ordered]_workqueue(). This conversion is mechanical and doesn't introduce any behavior change. Signed-off-by: Tejun Heo Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-delay.c | 2 +- drivers/md/dm-kcopyd.c | 2 +- drivers/md/dm-mpath.c | 5 +++-- drivers/md/dm-raid1.c | 2 +- drivers/md/dm-snap-persistent.c | 2 +- drivers/md/dm.c | 2 +- 6 files changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c index baa11912cc94..f18375dcedd9 100644 --- a/drivers/md/dm-delay.c +++ b/drivers/md/dm-delay.c @@ -352,7 +352,7 @@ static int __init dm_delay_init(void) { int r = -ENOMEM; - kdelayd_wq = create_workqueue("kdelayd"); + kdelayd_wq = alloc_workqueue("kdelayd", WQ_MEM_RECLAIM, 0); if (!kdelayd_wq) { DMERR("Couldn't start kdelayd"); goto bad_queue; diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index dad32f8bce7d..63d67169c7f4 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -672,7 +672,7 @@ int dm_kcopyd_client_create(unsigned int nr_pages, goto bad_slab; INIT_WORK(&kc->kcopyd_work, do_work); - kc->kcopyd_wq = create_singlethread_workqueue("kcopyd"); + kc->kcopyd_wq = alloc_ordered_workqueue("kcopyd", WQ_MEM_RECLAIM); if (!kc->kcopyd_wq) goto bad_workqueue; diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index fcc59c3f756e..35ab5781f88f 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -1675,7 +1675,7 @@ static int __init dm_multipath_init(void) return -EINVAL; } - kmultipathd = create_workqueue("kmpathd"); + kmultipathd = alloc_workqueue("kmpathd", WQ_MEM_RECLAIM, 0); if (!kmultipathd) { DMERR("failed to create workqueue kmpathd"); dm_unregister_target(&multipath_target); @@ -1689,7 +1689,8 @@ static int __init dm_multipath_init(void) * old workqueue would also create a bottleneck in the * path of the storage hardware device activation. */ - kmpath_handlerd = create_singlethread_workqueue("kmpath_handlerd"); + kmpath_handlerd = alloc_ordered_workqueue("kmpath_handlerd", + WQ_MEM_RECLAIM); if (!kmpath_handlerd) { DMERR("failed to create workqueue kmpath_handlerd"); destroy_workqueue(kmultipathd); diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 0d58b6f875cc..39917430f9f8 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1085,7 +1085,7 @@ static int mirror_ctr(struct dm_target *ti, unsigned int argc, char **argv) ti->num_flush_requests = 1; ti->num_discard_requests = 1; - ms->kmirrord_wq = create_singlethread_workqueue("kmirrord"); + ms->kmirrord_wq = alloc_ordered_workqueue("kmirrord", WQ_MEM_RECLAIM); if (!ms->kmirrord_wq) { DMERR("couldn't start kmirrord"); r = -ENOMEM; diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c index 2129cdb115dc..d3021a69c857 100644 --- a/drivers/md/dm-snap-persistent.c +++ b/drivers/md/dm-snap-persistent.c @@ -818,7 +818,7 @@ static int persistent_ctr(struct dm_exception_store *store, atomic_set(&ps->pending_count, 0); ps->callbacks = NULL; - ps->metadata_wq = create_singlethread_workqueue("ksnaphd"); + ps->metadata_wq = alloc_ordered_workqueue("ksnaphd", WQ_MEM_RECLAIM); if (!ps->metadata_wq) { kfree(ps); DMERR("couldn't start header metadata update thread"); diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 0de692176ad4..39aaa9290128 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1883,7 +1883,7 @@ static struct mapped_device *alloc_dev(int minor) add_disk(md->disk); format_dev_t(md->name, MKDEV(_major, minor)); - md->wq = create_singlethread_workqueue("kdmflush"); + md->wq = alloc_ordered_workqueue("kdmflush", WQ_MEM_RECLAIM); if (!md->wq) goto bad_thread; -- cgit v1.2.1 From 9c4376de98719d2768dd919553843de34bb094a6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 13 Jan 2011 19:59:58 +0000 Subject: dm: use non reentrant workqueues if equivalent kmirrord_wq, kcopyd_work and md->wq are created per dm instance and serve only a single work item from the dm instance, so non-reentrant workqueues would provide the same ordering guarantees as ordered ones while allowing CPU affinity and use of the workqueues for other purposes. Switch them to non-reentrant workqueues. Signed-off-by: Tejun Heo Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-kcopyd.c | 3 ++- drivers/md/dm-raid1.c | 5 +++-- drivers/md/dm.c | 3 ++- 3 files changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 63d67169c7f4..924f5f0084c2 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -672,7 +672,8 @@ int dm_kcopyd_client_create(unsigned int nr_pages, goto bad_slab; INIT_WORK(&kc->kcopyd_work, do_work); - kc->kcopyd_wq = alloc_ordered_workqueue("kcopyd", WQ_MEM_RECLAIM); + kc->kcopyd_wq = alloc_workqueue("kcopyd", + WQ_NON_REENTRANT | WQ_MEM_RECLAIM, 0); if (!kc->kcopyd_wq) goto bad_workqueue; diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 39917430f9f8..dee326775c60 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1085,7 +1085,8 @@ static int mirror_ctr(struct dm_target *ti, unsigned int argc, char **argv) ti->num_flush_requests = 1; ti->num_discard_requests = 1; - ms->kmirrord_wq = alloc_ordered_workqueue("kmirrord", WQ_MEM_RECLAIM); + ms->kmirrord_wq = alloc_workqueue("kmirrord", + WQ_NON_REENTRANT | WQ_MEM_RECLAIM, 0); if (!ms->kmirrord_wq) { DMERR("couldn't start kmirrord"); r = -ENOMEM; @@ -1414,7 +1415,7 @@ static int mirror_iterate_devices(struct dm_target *ti, static struct target_type mirror_target = { .name = "mirror", - .version = {1, 12, 0}, + .version = {1, 12, 1}, .module = THIS_MODULE, .ctr = mirror_ctr, .dtr = mirror_dtr, diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 39aaa9290128..e504bb40d60e 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1883,7 +1883,8 @@ static struct mapped_device *alloc_dev(int minor) add_disk(md->disk); format_dev_t(md->name, MKDEV(_major, minor)); - md->wq = alloc_ordered_workqueue("kdmflush", WQ_MEM_RECLAIM); + md->wq = alloc_workqueue("kdmflush", + WQ_NON_REENTRANT | WQ_MEM_RECLAIM, 0); if (!md->wq) goto bad_thread; -- cgit v1.2.1 From 239c8dd533e74de4a7f3c85c4f9f430eb08867c1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 13 Jan 2011 19:59:59 +0000 Subject: dm snapshot: persistent make metadata_wq multithreaded metadata_wq serves on-stack work items from chunk_io(). Even if multiple chunk_io() are simultaneously in progress, each is independent and queued only once, so multithreaded workqueue can be safely used. Switch metadata_wq to multithread and flush the work item instead of the workqueue in chunk_io(). Signed-off-by: Tejun Heo Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-snap-persistent.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c index d3021a69c857..95891dfcbca0 100644 --- a/drivers/md/dm-snap-persistent.c +++ b/drivers/md/dm-snap-persistent.c @@ -256,7 +256,7 @@ static int chunk_io(struct pstore *ps, void *area, chunk_t chunk, int rw, */ INIT_WORK_ONSTACK(&req.work, do_metadata); queue_work(ps->metadata_wq, &req.work); - flush_workqueue(ps->metadata_wq); + flush_work(&req.work); return req.result; } @@ -818,7 +818,7 @@ static int persistent_ctr(struct dm_exception_store *store, atomic_set(&ps->pending_count, 0); ps->callbacks = NULL; - ps->metadata_wq = alloc_ordered_workqueue("ksnaphd", WQ_MEM_RECLAIM); + ps->metadata_wq = alloc_workqueue("ksnaphd", WQ_MEM_RECLAIM, 0); if (!ps->metadata_wq) { kfree(ps); DMERR("couldn't start header metadata update thread"); -- cgit v1.2.1 From b83b2f295aec418c7501c05df4dfd168a79d165a Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 13 Jan 2011 19:59:59 +0000 Subject: dm snapshot: avoid storing private suspended state Use dm_suspended() rather than having each snapshot target maintain a private 'suspended' flag in struct dm_snapshot. Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-snap.c | 24 ++++-------------------- 1 file changed, 4 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index 0f47698beafa..fdde53cd12b7 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -79,9 +79,6 @@ struct dm_snapshot { /* Origin writes don't trigger exceptions until this is set */ int active; - /* Whether or not owning mapped_device is suspended */ - int suspended; - atomic_t pending_exceptions_count; mempool_t *pending_pool; @@ -1102,7 +1099,6 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) s->ti = ti; s->valid = 1; s->active = 0; - s->suspended = 0; atomic_set(&s->pending_exceptions_count, 0); init_rwsem(&s->lock); INIT_LIST_HEAD(&s->list); @@ -1733,15 +1729,6 @@ static void snapshot_merge_presuspend(struct dm_target *ti) stop_merge(s); } -static void snapshot_postsuspend(struct dm_target *ti) -{ - struct dm_snapshot *s = ti->private; - - down_write(&s->lock); - s->suspended = 1; - up_write(&s->lock); -} - static int snapshot_preresume(struct dm_target *ti) { int r = 0; @@ -1756,7 +1743,7 @@ static int snapshot_preresume(struct dm_target *ti) DMERR("Unable to resume snapshot source until " "handover completes."); r = -EINVAL; - } else if (!snap_src->suspended) { + } else if (!dm_suspended(snap_src->ti)) { DMERR("Unable to perform snapshot handover until " "source is suspended."); r = -EINVAL; @@ -1789,7 +1776,6 @@ static void snapshot_resume(struct dm_target *ti) down_write(&s->lock); s->active = 1; - s->suspended = 0; up_write(&s->lock); } @@ -2167,7 +2153,7 @@ static int origin_iterate_devices(struct dm_target *ti, static struct target_type origin_target = { .name = "snapshot-origin", - .version = {1, 7, 0}, + .version = {1, 7, 1}, .module = THIS_MODULE, .ctr = origin_ctr, .dtr = origin_dtr, @@ -2180,13 +2166,12 @@ static struct target_type origin_target = { static struct target_type snapshot_target = { .name = "snapshot", - .version = {1, 9, 0}, + .version = {1, 10, 0}, .module = THIS_MODULE, .ctr = snapshot_ctr, .dtr = snapshot_dtr, .map = snapshot_map, .end_io = snapshot_end_io, - .postsuspend = snapshot_postsuspend, .preresume = snapshot_preresume, .resume = snapshot_resume, .status = snapshot_status, @@ -2195,14 +2180,13 @@ static struct target_type snapshot_target = { static struct target_type merge_target = { .name = dm_snapshot_merge_target_name, - .version = {1, 0, 0}, + .version = {1, 1, 0}, .module = THIS_MODULE, .ctr = snapshot_ctr, .dtr = snapshot_dtr, .map = snapshot_merge_map, .end_io = snapshot_end_io, .presuspend = snapshot_merge_presuspend, - .postsuspend = snapshot_postsuspend, .preresume = snapshot_preresume, .resume = snapshot_merge_resume, .status = snapshot_status, -- cgit v1.2.1 From dbc883f1570d992ba926a8c9e22140ba473c6cc1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 13 Jan 2011 20:00:00 +0000 Subject: dm log: use PTR_ERR value instead of ENOMEM It's nicer to return the PTR_ERR() value instead of just returning -ENOMEM. In the current code the PTR_ERR() value is always equal to -ENOMEM so this doesn't actually affect anything, but still... In addition, dm_dirty_log_create() doesn't check for a specific -ENOMEM return. So this change is safe relative to potential for a non -ENOMEM return in the future. Signed-off-by: Dan Carpenter Acked-by: Jonathan Brassow Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-log.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c index 33420e68d153..6951536ea29c 100644 --- a/drivers/md/dm-log.c +++ b/drivers/md/dm-log.c @@ -455,7 +455,7 @@ static int create_log_context(struct dm_dirty_log *log, struct dm_target *ti, r = PTR_ERR(lc->io_req.client); DMWARN("couldn't allocate disk io client"); kfree(lc); - return -ENOMEM; + return r; } lc->disk_header = vmalloc(buf_size); -- cgit v1.2.1 From 052189a2ec956810feefb6a681416c5e6a207646 Mon Sep 17 00:00:00 2001 From: Kiyoshi Ueda Date: Thu, 13 Jan 2011 20:00:00 +0000 Subject: dm: remove superfluous irq disablement in dm_request_fn This patch changes spin_lock_irq() to spin_lock() in dm_request_fn(). This patch is just a clean-up and no functional change. The spin_lock_irq() was leftover from the early request-based dm code, where map_request() used to enable interrupts. Since current map_request() never enables interrupts, we can change it to spin_lock() to match the prior spin_unlock(). Auditing through the dm and block-layer code called from map_request(), I confirmed all functions save/restore interrupt status, so no function returning with interrupts enabled. Also I haven't observed any problem on my test environment which uses scsi and lpfc driver after heavy I/O testing with occasional path down/up. Added BUG_ON() to detect breakage in future. Signed-off-by: Kiyoshi Ueda Signed-off-by: Jun'ichi Nomura Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm.c b/drivers/md/dm.c index e504bb40d60e..eaa3af0e0632 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1637,13 +1637,15 @@ static void dm_request_fn(struct request_queue *q) if (map_request(ti, clone, md)) goto requeued; - spin_lock_irq(q->queue_lock); + BUG_ON(!irqs_disabled()); + spin_lock(q->queue_lock); } goto out; requeued: - spin_lock_irq(q->queue_lock); + BUG_ON(!irqs_disabled()); + spin_lock(q->queue_lock); plug_and_out: if (!elv_queue_empty(q)) -- cgit v1.2.1 From 4e2d19e46b507018c6ed15f6c081d8f887ae229c Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 13 Jan 2011 20:00:01 +0000 Subject: dm mpath: delay activate_path retry on SCSI_DH_RETRY This patch adds a user-configurable 'pg_init_delay_msecs' feature. Use this feature to specify the number of milliseconds to delay before retrying scsi_dh_activate, when SCSI_DH_RETRY is returned. SCSI Device Handlers return SCSI_DH_IMM_RETRY if we could retry activation immediately and SCSI_DH_RETRY in cases where it is better to retry after some delay. Currently we immediately retry scsi_dh_activate irrespective of SCSI_DH_IMM_RETRY and SCSI_DH_RETRY. The 'pg_init_delay_msecs' feature may be provided during table create or load, e.g.: dmsetup create --table "0 20971520 multipath 3 queue_if_no_path \ pg_init_delay_msecs 2500 ..." mpatha The default for 'pg_init_delay_msecs' is 2000 milliseconds. Maximum configurable delay is 60000 milliseconds. Specifying a 'pg_init_delay_msecs' of 0 will cause immediate retry. Signed-off-by: Nikanth Karthikesan Signed-off-by: Chandra Seetharaman Acked-by: Mike Christie Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-mpath.c | 48 ++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 38 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 35ab5781f88f..b82d28819e2a 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -23,6 +23,8 @@ #define DM_MSG_PREFIX "multipath" #define MESG_STR(x) x, sizeof(x) +#define DM_PG_INIT_DELAY_MSECS 2000 +#define DM_PG_INIT_DELAY_DEFAULT ((unsigned) -1) /* Path properties */ struct pgpath { @@ -33,7 +35,7 @@ struct pgpath { unsigned fail_count; /* Cumulative failure count */ struct dm_path path; - struct work_struct activate_path; + struct delayed_work activate_path; }; #define path_to_pgpath(__pgp) container_of((__pgp), struct pgpath, path) @@ -64,11 +66,15 @@ struct multipath { const char *hw_handler_name; char *hw_handler_params; + unsigned nr_priority_groups; struct list_head priority_groups; + + wait_queue_head_t pg_init_wait; /* Wait for pg_init completion */ + unsigned pg_init_required; /* pg_init needs calling? */ unsigned pg_init_in_progress; /* Only one pg_init allowed at once */ - wait_queue_head_t pg_init_wait; /* Wait for pg_init completion */ + unsigned pg_init_delay_retry; /* Delay pg_init retry? */ unsigned nr_valid_paths; /* Total number of usable paths */ struct pgpath *current_pgpath; @@ -81,6 +87,7 @@ struct multipath { unsigned saved_queue_if_no_path;/* Saved state during suspension */ unsigned pg_init_retries; /* Number of times to retry pg_init */ unsigned pg_init_count; /* Number of times pg_init called */ + unsigned pg_init_delay_msecs; /* Number of msecs before pg_init retry */ struct work_struct process_queued_ios; struct list_head queued_ios; @@ -127,7 +134,7 @@ static struct pgpath *alloc_pgpath(void) if (pgpath) { pgpath->is_active = 1; - INIT_WORK(&pgpath->activate_path, activate_path); + INIT_DELAYED_WORK(&pgpath->activate_path, activate_path); } return pgpath; @@ -188,6 +195,7 @@ static struct multipath *alloc_multipath(struct dm_target *ti) INIT_LIST_HEAD(&m->queued_ios); spin_lock_init(&m->lock); m->queue_io = 1; + m->pg_init_delay_msecs = DM_PG_INIT_DELAY_DEFAULT; INIT_WORK(&m->process_queued_ios, process_queued_ios); INIT_WORK(&m->trigger_event, trigger_event); init_waitqueue_head(&m->pg_init_wait); @@ -227,14 +235,19 @@ static void free_multipath(struct multipath *m) static void __pg_init_all_paths(struct multipath *m) { struct pgpath *pgpath; + unsigned long pg_init_delay = 0; m->pg_init_count++; m->pg_init_required = 0; + if (m->pg_init_delay_retry) + pg_init_delay = msecs_to_jiffies(m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT ? + m->pg_init_delay_msecs : DM_PG_INIT_DELAY_MSECS); list_for_each_entry(pgpath, &m->current_pg->pgpaths, list) { /* Skip failed paths */ if (!pgpath->is_active) continue; - if (queue_work(kmpath_handlerd, &pgpath->activate_path)) + if (queue_delayed_work(kmpath_handlerd, &pgpath->activate_path, + pg_init_delay)) m->pg_init_in_progress++; } } @@ -782,8 +795,9 @@ static int parse_features(struct arg_set *as, struct multipath *m) const char *param_name; static struct param _params[] = { - {0, 3, "invalid number of feature args"}, + {0, 5, "invalid number of feature args"}, {1, 50, "pg_init_retries must be between 1 and 50"}, + {0, 60000, "pg_init_delay_msecs must be between 0 and 60000"}, }; r = read_param(_params, shift(as), &argc, &ti->error); @@ -810,6 +824,14 @@ static int parse_features(struct arg_set *as, struct multipath *m) continue; } + if (!strnicmp(param_name, MESG_STR("pg_init_delay_msecs")) && + (argc >= 1)) { + r = read_param(_params + 2, shift(as), + &m->pg_init_delay_msecs, &ti->error); + argc--; + continue; + } + ti->error = "Unrecognised multipath feature request"; r = -EINVAL; } while (argc && !r); @@ -1022,7 +1044,7 @@ static int reinstate_path(struct pgpath *pgpath) m->current_pgpath = NULL; queue_work(kmultipathd, &m->process_queued_ios); } else if (m->hw_handler_name && (m->current_pg == pgpath->pg)) { - if (queue_work(kmpath_handlerd, &pgpath->activate_path)) + if (queue_work(kmpath_handlerd, &pgpath->activate_path.work)) m->pg_init_in_progress++; } @@ -1157,6 +1179,7 @@ static void pg_init_done(void *data, int errors) struct priority_group *pg = pgpath->pg; struct multipath *m = pg->m; unsigned long flags; + unsigned delay_retry = 0; /* device or driver problems */ switch (errors) { @@ -1181,8 +1204,9 @@ static void pg_init_done(void *data, int errors) */ bypass_pg(m, pg, 1); break; - /* TODO: For SCSI_DH_RETRY we should wait a couple seconds */ case SCSI_DH_RETRY: + /* Wait before retrying. */ + delay_retry = 1; case SCSI_DH_IMM_RETRY: case SCSI_DH_RES_TEMP_UNAVAIL: if (pg_init_limit_reached(m, pgpath)) @@ -1215,6 +1239,7 @@ static void pg_init_done(void *data, int errors) if (!m->pg_init_required) m->queue_io = 0; + m->pg_init_delay_retry = delay_retry; queue_work(kmultipathd, &m->process_queued_ios); /* @@ -1229,7 +1254,7 @@ out: static void activate_path(struct work_struct *work) { struct pgpath *pgpath = - container_of(work, struct pgpath, activate_path); + container_of(work, struct pgpath, activate_path.work); scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev), pg_init_done, pgpath); @@ -1370,11 +1395,14 @@ static int multipath_status(struct dm_target *ti, status_type_t type, DMEMIT("2 %u %u ", m->queue_size, m->pg_init_count); else { DMEMIT("%u ", m->queue_if_no_path + - (m->pg_init_retries > 0) * 2); + (m->pg_init_retries > 0) * 2 + + (m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT) * 2); if (m->queue_if_no_path) DMEMIT("queue_if_no_path "); if (m->pg_init_retries) DMEMIT("pg_init_retries %u ", m->pg_init_retries); + if (m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT) + DMEMIT("pg_init_delay_msecs %u ", m->pg_init_delay_msecs); } if (!m->hw_handler_name || type == STATUSTYPE_INFO) @@ -1643,7 +1671,7 @@ out: *---------------------------------------------------------------*/ static struct target_type multipath_target = { .name = "multipath", - .version = {1, 1, 1}, + .version = {1, 2, 0}, .module = THIS_MODULE, .ctr = multipath_ctr, .dtr = multipath_dtr, -- cgit v1.2.1 From 9d357b0787bb3c91835d5e658c3bda178f9ca419 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 13 Jan 2011 20:00:01 +0000 Subject: dm: introduce target callbacks and congestion callback DM currently implements congestion checking by checking on congestion in each component device. For raid456 we need to also check if the stripe cache is congested. Add per-target congestion checker callback support. Extending the target_callbacks structure with additional callback functions allows for establishing multiple callbacks per-target (a callback is also needed for unplug). Cc: linux-raid@vger.kernel.org Signed-off-by: NeilBrown Signed-off-by: Jonathan Brassow Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-table.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 985c20a4f30e..7e2ec3c05550 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -71,6 +71,8 @@ struct dm_table { void *event_context; struct dm_md_mempools *mempools; + + struct list_head target_callbacks; }; /* @@ -204,6 +206,7 @@ int dm_table_create(struct dm_table **result, fmode_t mode, return -ENOMEM; INIT_LIST_HEAD(&t->devices); + INIT_LIST_HEAD(&t->target_callbacks); atomic_set(&t->holders, 0); t->discards_supported = 1; @@ -1225,10 +1228,17 @@ int dm_table_resume_targets(struct dm_table *t) return 0; } +void dm_table_add_target_callbacks(struct dm_table *t, struct dm_target_callbacks *cb) +{ + list_add(&cb->list, &t->target_callbacks); +} +EXPORT_SYMBOL_GPL(dm_table_add_target_callbacks); + int dm_table_any_congested(struct dm_table *t, int bdi_bits) { struct dm_dev_internal *dd; struct list_head *devices = dm_table_get_devices(t); + struct dm_target_callbacks *cb; int r = 0; list_for_each_entry(dd, devices, list) { @@ -1243,6 +1253,10 @@ int dm_table_any_congested(struct dm_table *t, int bdi_bits) bdevname(dd->dm_dev.bdev, b)); } + list_for_each_entry(cb, &t->target_callbacks, list) + if (cb->congested_fn) + r |= cb->congested_fn(cb, bdi_bits); + return r; } -- cgit v1.2.1 From 99d03c141b40914b67d63c9d23b8da4386422ed7 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 13 Jan 2011 20:00:02 +0000 Subject: dm: per target unplug callback support Add per-target unplug callback support. Cc: linux-raid@vger.kernel.org Signed-off-by: NeilBrown Signed-off-by: Jonathan Brassow Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-table.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 7e2ec3c05550..dffa0ac7c4f0 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -1278,6 +1278,7 @@ void dm_table_unplug_all(struct dm_table *t) { struct dm_dev_internal *dd; struct list_head *devices = dm_table_get_devices(t); + struct dm_target_callbacks *cb; list_for_each_entry(dd, devices, list) { struct request_queue *q = bdev_get_queue(dd->dm_dev.bdev); @@ -1290,6 +1291,10 @@ void dm_table_unplug_all(struct dm_table *t) dm_device_name(t->md), bdevname(dd->dm_dev.bdev, b)); } + + list_for_each_entry(cb, &t->target_callbacks, list) + if (cb->unplug_fn) + cb->unplug_fn(cb); } struct mapped_device *dm_table_get_md(struct dm_table *t) -- cgit v1.2.1 From 9d09e663d5502c46f2d9481c04c1087e1c2da698 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 13 Jan 2011 20:00:02 +0000 Subject: dm: raid456 basic support This patch is the skeleton for the DM target that will be the bridge from DM to MD (initially RAID456 and later RAID1). It provides a way to use device-mapper interfaces to the MD RAID456 drivers. As with all device-mapper targets, the nominal public interfaces are the constructor (CTR) tables and the status outputs (both STATUSTYPE_INFO and STATUSTYPE_TABLE). The CTR table looks like the following: 1: raid \ 2: <#raid_params> \ 3: <#raid_devs> .. Line 1 contains the standard first three arguments to any device-mapper target - the start, length, and target type fields. The target type in this case is "raid". Line 2 contains the arguments that define the particular raid type/personality/level, the required arguments for that raid type, and any optional arguments. Possible raid types include: raid4, raid5_la, raid5_ls, raid5_rs, raid6_zr, raid6_nr, and raid6_nc. (again, raid1 is planned for the future.) The list of required and optional parameters is the same for all the current raid types. The required parameters are positional, while the optional parameters are given as key/value pairs. The possible parameters are as follows: Chunk size in sectors. [[no]sync] Force/Prevent RAID initialization [rebuild ] Rebuild the drive indicated by the index [daemon_sleep ] Time between bitmap daemon work to clear bits [min_recovery_rate ] Throttle RAID initialization [max_recovery_rate ] Throttle RAID initialization [max_write_behind ] See '-write-behind=' (man mdadm) [stripe_cache ] Stripe cache size for higher RAIDs Line 3 contains the list of devices that compose the array in metadata/data device pairs. If the metadata is stored separately, a '-' is given for the metadata device position. If a drive has failed or is missing at creation time, a '-' can be given for both the metadata and data drives for a given position. Examples: # RAID4 - 4 data drives, 1 parity # No metadata devices specified to hold superblock/bitmap info # Chunk size of 1MiB # (Lines separated for easy reading) 0 1960893648 raid \ raid4 1 2048 \ 5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81 # RAID4 - 4 data drives, 1 parity (no metadata devices) # Chunk size of 1MiB, force RAID initialization, # min recovery rate at 20 kiB/sec/disk 0 1960893648 raid \ raid4 4 2048 min_recovery_rate 20 sync\ 5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81 Performing a 'dmsetup table' should display the CTR table used to construct the mapping (with possible reordering of optional parameters). Performing a 'dmsetup status' will yield information on the state and health of the array. The output is as follows: 1: raid \ 2: <#devices> <1 health char for each dev> Line 1 is standard DM output. Line 2 is best shown by example: 0 1960893648 raid raid4 5 AAAAA 2/490221568 Here we can see the RAID type is raid4, there are 5 devices - all of which are 'A'live, and the array is 2/490221568 complete with recovery. Cc: linux-raid@vger.kernel.org Signed-off-by: NeilBrown Signed-off-by: Jonathan Brassow Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/Kconfig | 24 ++ drivers/md/Makefile | 1 + drivers/md/dm-raid.c | 697 +++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 722 insertions(+) create mode 100644 drivers/md/dm-raid.c (limited to 'drivers') diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index bf1a95e31559..98d9ec85e0eb 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -240,6 +240,30 @@ config DM_MIRROR Allow volume managers to mirror logical volumes, also needed for live data migration tools such as 'pvmove'. +config DM_RAID + tristate "RAID 4/5/6 target (EXPERIMENTAL)" + depends on BLK_DEV_DM && EXPERIMENTAL + select MD_RAID456 + select BLK_DEV_MD + ---help--- + A dm target that supports RAID4, RAID5 and RAID6 mappings + + A RAID-5 set of N drives with a capacity of C MB per drive provides + the capacity of C * (N - 1) MB, and protects against a failure + of a single drive. For a given sector (row) number, (N - 1) drives + contain data sectors, and one drive contains the parity protection. + For a RAID-4 set, the parity blocks are present on a single drive, + while a RAID-5 set distributes the parity across the drives in one + of the available parity distribution methods. + + A RAID-6 set of N drives with a capacity of C MB per drive + provides the capacity of C * (N - 2) MB, and protects + against a failure of any two drives. For a given sector + (row) number, (N - 2) drives contain data sectors, and two + drives contains two independent redundancy syndromes. Like + RAID-5, RAID-6 distributes the syndromes across the drives + in one of the available parity distribution methods. + config DM_LOG_USERSPACE tristate "Mirror userspace logging (EXPERIMENTAL)" depends on DM_MIRROR && EXPERIMENTAL && NET diff --git a/drivers/md/Makefile b/drivers/md/Makefile index 5e3aac41919d..d0138606c2e8 100644 --- a/drivers/md/Makefile +++ b/drivers/md/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_DM_SNAPSHOT) += dm-snapshot.o obj-$(CONFIG_DM_MIRROR) += dm-mirror.o dm-log.o dm-region-hash.o obj-$(CONFIG_DM_LOG_USERSPACE) += dm-log-userspace.o obj-$(CONFIG_DM_ZERO) += dm-zero.o +obj-$(CONFIG_DM_RAID) += dm-raid.o ifeq ($(CONFIG_DM_UEVENT),y) dm-mod-objs += dm-uevent.o diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c new file mode 100644 index 000000000000..b9e1e15ef11c --- /dev/null +++ b/drivers/md/dm-raid.c @@ -0,0 +1,697 @@ +/* + * Copyright (C) 2010-2011 Neil Brown + * Copyright (C) 2010-2011 Red Hat, Inc. All rights reserved. + * + * This file is released under the GPL. + */ + +#include + +#include "md.h" +#include "raid5.h" +#include "dm.h" +#include "bitmap.h" + +#define DM_MSG_PREFIX "raid" + +/* + * If the MD doesn't support MD_SYNC_STATE_FORCED yet, then + * make it so the flag doesn't set anything. + */ +#ifndef MD_SYNC_STATE_FORCED +#define MD_SYNC_STATE_FORCED 0 +#endif + +struct raid_dev { + /* + * Two DM devices, one to hold metadata and one to hold the + * actual data/parity. The reason for this is to not confuse + * ti->len and give more flexibility in altering size and + * characteristics. + * + * While it is possible for this device to be associated + * with a different physical device than the data_dev, it + * is intended for it to be the same. + * |--------- Physical Device ---------| + * |- meta_dev -|------ data_dev ------| + */ + struct dm_dev *meta_dev; + struct dm_dev *data_dev; + struct mdk_rdev_s rdev; +}; + +/* + * Flags for rs->print_flags field. + */ +#define DMPF_DAEMON_SLEEP 0x1 +#define DMPF_MAX_WRITE_BEHIND 0x2 +#define DMPF_SYNC 0x4 +#define DMPF_NOSYNC 0x8 +#define DMPF_STRIPE_CACHE 0x10 +#define DMPF_MIN_RECOVERY_RATE 0x20 +#define DMPF_MAX_RECOVERY_RATE 0x40 + +struct raid_set { + struct dm_target *ti; + + uint64_t print_flags; + + struct mddev_s md; + struct raid_type *raid_type; + struct dm_target_callbacks callbacks; + + struct raid_dev dev[0]; +}; + +/* Supported raid types and properties. */ +static struct raid_type { + const char *name; /* RAID algorithm. */ + const char *descr; /* Descriptor text for logging. */ + const unsigned parity_devs; /* # of parity devices. */ + const unsigned minimal_devs; /* minimal # of devices in set. */ + const unsigned level; /* RAID level. */ + const unsigned algorithm; /* RAID algorithm. */ +} raid_types[] = { + {"raid4", "RAID4 (dedicated parity disk)", 1, 2, 5, ALGORITHM_PARITY_0}, + {"raid5_la", "RAID5 (left asymmetric)", 1, 2, 5, ALGORITHM_LEFT_ASYMMETRIC}, + {"raid5_ra", "RAID5 (right asymmetric)", 1, 2, 5, ALGORITHM_RIGHT_ASYMMETRIC}, + {"raid5_ls", "RAID5 (left symmetric)", 1, 2, 5, ALGORITHM_LEFT_SYMMETRIC}, + {"raid5_rs", "RAID5 (right symmetric)", 1, 2, 5, ALGORITHM_RIGHT_SYMMETRIC}, + {"raid6_zr", "RAID6 (zero restart)", 2, 4, 6, ALGORITHM_ROTATING_ZERO_RESTART}, + {"raid6_nr", "RAID6 (N restart)", 2, 4, 6, ALGORITHM_ROTATING_N_RESTART}, + {"raid6_nc", "RAID6 (N continue)", 2, 4, 6, ALGORITHM_ROTATING_N_CONTINUE} +}; + +static struct raid_type *get_raid_type(char *name) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(raid_types); i++) + if (!strcmp(raid_types[i].name, name)) + return &raid_types[i]; + + return NULL; +} + +static struct raid_set *context_alloc(struct dm_target *ti, struct raid_type *raid_type, unsigned raid_devs) +{ + unsigned i; + struct raid_set *rs; + sector_t sectors_per_dev; + + if (raid_devs <= raid_type->parity_devs) { + ti->error = "Insufficient number of devices"; + return ERR_PTR(-EINVAL); + } + + sectors_per_dev = ti->len; + if (sector_div(sectors_per_dev, (raid_devs - raid_type->parity_devs))) { + ti->error = "Target length not divisible by number of data devices"; + return ERR_PTR(-EINVAL); + } + + rs = kzalloc(sizeof(*rs) + raid_devs * sizeof(rs->dev[0]), GFP_KERNEL); + if (!rs) { + ti->error = "Cannot allocate raid context"; + return ERR_PTR(-ENOMEM); + } + + mddev_init(&rs->md); + + rs->ti = ti; + rs->raid_type = raid_type; + rs->md.raid_disks = raid_devs; + rs->md.level = raid_type->level; + rs->md.new_level = rs->md.level; + rs->md.dev_sectors = sectors_per_dev; + rs->md.layout = raid_type->algorithm; + rs->md.new_layout = rs->md.layout; + rs->md.delta_disks = 0; + rs->md.recovery_cp = 0; + + for (i = 0; i < raid_devs; i++) + md_rdev_init(&rs->dev[i].rdev); + + /* + * Remaining items to be initialized by further RAID params: + * rs->md.persistent + * rs->md.external + * rs->md.chunk_sectors + * rs->md.new_chunk_sectors + */ + + return rs; +} + +static void context_free(struct raid_set *rs) +{ + int i; + + for (i = 0; i < rs->md.raid_disks; i++) + if (rs->dev[i].data_dev) + dm_put_device(rs->ti, rs->dev[i].data_dev); + + kfree(rs); +} + +/* + * For every device we have two words + * : meta device name or '-' if missing + * : data device name or '-' if missing + * + * This code parses those words. + */ +static int dev_parms(struct raid_set *rs, char **argv) +{ + int i; + int rebuild = 0; + int metadata_available = 0; + int ret = 0; + + for (i = 0; i < rs->md.raid_disks; i++, argv += 2) { + rs->dev[i].rdev.raid_disk = i; + + rs->dev[i].meta_dev = NULL; + rs->dev[i].data_dev = NULL; + + /* + * There are no offsets, since there is a separate device + * for data and metadata. + */ + rs->dev[i].rdev.data_offset = 0; + rs->dev[i].rdev.mddev = &rs->md; + + if (strcmp(argv[0], "-")) { + rs->ti->error = "Metadata devices not supported"; + return -EINVAL; + } + + if (!strcmp(argv[1], "-")) { + if (!test_bit(In_sync, &rs->dev[i].rdev.flags) && + (!rs->dev[i].rdev.recovery_offset)) { + rs->ti->error = "Drive designated for rebuild not specified"; + return -EINVAL; + } + + continue; + } + + ret = dm_get_device(rs->ti, argv[1], + dm_table_get_mode(rs->ti->table), + &rs->dev[i].data_dev); + if (ret) { + rs->ti->error = "RAID device lookup failure"; + return ret; + } + + rs->dev[i].rdev.bdev = rs->dev[i].data_dev->bdev; + list_add(&rs->dev[i].rdev.same_set, &rs->md.disks); + if (!test_bit(In_sync, &rs->dev[i].rdev.flags)) + rebuild++; + } + + if (metadata_available) { + rs->md.external = 0; + rs->md.persistent = 1; + rs->md.major_version = 2; + } else if (rebuild && !rs->md.recovery_cp) { + /* + * Without metadata, we will not be able to tell if the array + * is in-sync or not - we must assume it is not. Therefore, + * it is impossible to rebuild a drive. + * + * Even if there is metadata, the on-disk information may + * indicate that the array is not in-sync and it will then + * fail at that time. + * + * User could specify 'nosync' option if desperate. + */ + DMERR("Unable to rebuild drive while array is not in-sync"); + rs->ti->error = "RAID device lookup failure"; + return -EINVAL; + } + + return 0; +} + +/* + * Possible arguments are... + * RAID456: + * [optional_args] + * + * Optional args: + * [[no]sync] Force or prevent recovery of the entire array + * [rebuild ] Rebuild the drive indicated by the index + * [daemon_sleep ] Time between bitmap daemon work to clear bits + * [min_recovery_rate ] Throttle RAID initialization + * [max_recovery_rate ] Throttle RAID initialization + * [max_write_behind ] See '-write-behind=' (man mdadm) + * [stripe_cache ] Stripe cache size for higher RAIDs + */ +static int parse_raid_params(struct raid_set *rs, char **argv, + unsigned num_raid_params) +{ + unsigned i, rebuild_cnt = 0; + unsigned long value; + char *key; + + /* + * First, parse the in-order required arguments + */ + if ((strict_strtoul(argv[0], 10, &value) < 0) || + !is_power_of_2(value) || (value < 8)) { + rs->ti->error = "Bad chunk size"; + return -EINVAL; + } + + rs->md.new_chunk_sectors = rs->md.chunk_sectors = value; + argv++; + num_raid_params--; + + /* + * Second, parse the unordered optional arguments + */ + for (i = 0; i < rs->md.raid_disks; i++) + set_bit(In_sync, &rs->dev[i].rdev.flags); + + for (i = 0; i < num_raid_params; i++) { + if (!strcmp(argv[i], "nosync")) { + rs->md.recovery_cp = MaxSector; + rs->print_flags |= DMPF_NOSYNC; + rs->md.flags |= MD_SYNC_STATE_FORCED; + continue; + } + if (!strcmp(argv[i], "sync")) { + rs->md.recovery_cp = 0; + rs->print_flags |= DMPF_SYNC; + rs->md.flags |= MD_SYNC_STATE_FORCED; + continue; + } + + /* The rest of the optional arguments come in key/value pairs */ + if ((i + 1) >= num_raid_params) { + rs->ti->error = "Wrong number of raid parameters given"; + return -EINVAL; + } + + key = argv[i++]; + if (strict_strtoul(argv[i], 10, &value) < 0) { + rs->ti->error = "Bad numerical argument given in raid params"; + return -EINVAL; + } + + if (!strcmp(key, "rebuild")) { + if (++rebuild_cnt > rs->raid_type->parity_devs) { + rs->ti->error = "Too many rebuild drives given"; + return -EINVAL; + } + if (value > rs->md.raid_disks) { + rs->ti->error = "Invalid rebuild index given"; + return -EINVAL; + } + clear_bit(In_sync, &rs->dev[value].rdev.flags); + rs->dev[value].rdev.recovery_offset = 0; + } else if (!strcmp(key, "max_write_behind")) { + rs->print_flags |= DMPF_MAX_WRITE_BEHIND; + + /* + * In device-mapper, we specify things in sectors, but + * MD records this value in kB + */ + value /= 2; + if (value > COUNTER_MAX) { + rs->ti->error = "Max write-behind limit out of range"; + return -EINVAL; + } + rs->md.bitmap_info.max_write_behind = value; + } else if (!strcmp(key, "daemon_sleep")) { + rs->print_flags |= DMPF_DAEMON_SLEEP; + if (!value || (value > MAX_SCHEDULE_TIMEOUT)) { + rs->ti->error = "daemon sleep period out of range"; + return -EINVAL; + } + rs->md.bitmap_info.daemon_sleep = value; + } else if (!strcmp(key, "stripe_cache")) { + rs->print_flags |= DMPF_STRIPE_CACHE; + + /* + * In device-mapper, we specify things in sectors, but + * MD records this value in kB + */ + value /= 2; + + if (rs->raid_type->level < 5) { + rs->ti->error = "Inappropriate argument: stripe_cache"; + return -EINVAL; + } + if (raid5_set_cache_size(&rs->md, (int)value)) { + rs->ti->error = "Bad stripe_cache size"; + return -EINVAL; + } + } else if (!strcmp(key, "min_recovery_rate")) { + rs->print_flags |= DMPF_MIN_RECOVERY_RATE; + if (value > INT_MAX) { + rs->ti->error = "min_recovery_rate out of range"; + return -EINVAL; + } + rs->md.sync_speed_min = (int)value; + } else if (!strcmp(key, "max_recovery_rate")) { + rs->print_flags |= DMPF_MAX_RECOVERY_RATE; + if (value > INT_MAX) { + rs->ti->error = "max_recovery_rate out of range"; + return -EINVAL; + } + rs->md.sync_speed_max = (int)value; + } else { + DMERR("Unable to parse RAID parameter: %s", key); + rs->ti->error = "Unable to parse RAID parameters"; + return -EINVAL; + } + } + + /* Assume there are no metadata devices until the drives are parsed */ + rs->md.persistent = 0; + rs->md.external = 1; + + return 0; +} + +static void do_table_event(struct work_struct *ws) +{ + struct raid_set *rs = container_of(ws, struct raid_set, md.event_work); + + dm_table_event(rs->ti->table); +} + +static int raid_is_congested(struct dm_target_callbacks *cb, int bits) +{ + struct raid_set *rs = container_of(cb, struct raid_set, callbacks); + + return md_raid5_congested(&rs->md, bits); +} + +static void raid_unplug(struct dm_target_callbacks *cb) +{ + struct raid_set *rs = container_of(cb, struct raid_set, callbacks); + + md_raid5_unplug_device(rs->md.private); +} + +/* + * Construct a RAID4/5/6 mapping: + * Args: + * <#raid_params> \ + * <#raid_devs> { .. } + * + * ** metadata devices are not supported yet, use '-' instead ** + * + * varies by . See 'parse_raid_params' for + * details on possible . + */ +static int raid_ctr(struct dm_target *ti, unsigned argc, char **argv) +{ + int ret; + struct raid_type *rt; + unsigned long num_raid_params, num_raid_devs; + struct raid_set *rs = NULL; + + /* Must have at least <#raid_params> */ + if (argc < 2) { + ti->error = "Too few arguments"; + return -EINVAL; + } + + /* raid type */ + rt = get_raid_type(argv[0]); + if (!rt) { + ti->error = "Unrecognised raid_type"; + return -EINVAL; + } + argc--; + argv++; + + /* number of RAID parameters */ + if (strict_strtoul(argv[0], 10, &num_raid_params) < 0) { + ti->error = "Cannot understand number of RAID parameters"; + return -EINVAL; + } + argc--; + argv++; + + /* Skip over RAID params for now and find out # of devices */ + if (num_raid_params + 1 > argc) { + ti->error = "Arguments do not agree with counts given"; + return -EINVAL; + } + + if ((strict_strtoul(argv[num_raid_params], 10, &num_raid_devs) < 0) || + (num_raid_devs >= INT_MAX)) { + ti->error = "Cannot understand number of raid devices"; + return -EINVAL; + } + + rs = context_alloc(ti, rt, (unsigned)num_raid_devs); + if (IS_ERR(rs)) + return PTR_ERR(rs); + + ret = parse_raid_params(rs, argv, (unsigned)num_raid_params); + if (ret) + goto bad; + + ret = -EINVAL; + + argc -= num_raid_params + 1; /* +1: we already have num_raid_devs */ + argv += num_raid_params + 1; + + if (argc != (num_raid_devs * 2)) { + ti->error = "Supplied RAID devices does not match the count given"; + goto bad; + } + + ret = dev_parms(rs, argv); + if (ret) + goto bad; + + INIT_WORK(&rs->md.event_work, do_table_event); + ti->split_io = rs->md.chunk_sectors; + ti->private = rs; + + mutex_lock(&rs->md.reconfig_mutex); + ret = md_run(&rs->md); + rs->md.in_sync = 0; /* Assume already marked dirty */ + mutex_unlock(&rs->md.reconfig_mutex); + + if (ret) { + ti->error = "Fail to run raid array"; + goto bad; + } + + rs->callbacks.congested_fn = raid_is_congested; + rs->callbacks.unplug_fn = raid_unplug; + dm_table_add_target_callbacks(ti->table, &rs->callbacks); + + return 0; + +bad: + context_free(rs); + + return ret; +} + +static void raid_dtr(struct dm_target *ti) +{ + struct raid_set *rs = ti->private; + + list_del_init(&rs->callbacks.list); + md_stop(&rs->md); + context_free(rs); +} + +static int raid_map(struct dm_target *ti, struct bio *bio, union map_info *map_context) +{ + struct raid_set *rs = ti->private; + mddev_t *mddev = &rs->md; + + mddev->pers->make_request(mddev, bio); + + return DM_MAPIO_SUBMITTED; +} + +static int raid_status(struct dm_target *ti, status_type_t type, + char *result, unsigned maxlen) +{ + struct raid_set *rs = ti->private; + unsigned raid_param_cnt = 1; /* at least 1 for chunksize */ + unsigned sz = 0; + int i; + sector_t sync; + + switch (type) { + case STATUSTYPE_INFO: + DMEMIT("%s %d ", rs->raid_type->name, rs->md.raid_disks); + + for (i = 0; i < rs->md.raid_disks; i++) { + if (test_bit(Faulty, &rs->dev[i].rdev.flags)) + DMEMIT("D"); + else if (test_bit(In_sync, &rs->dev[i].rdev.flags)) + DMEMIT("A"); + else + DMEMIT("a"); + } + + if (test_bit(MD_RECOVERY_RUNNING, &rs->md.recovery)) + sync = rs->md.curr_resync_completed; + else + sync = rs->md.recovery_cp; + + if (sync > rs->md.resync_max_sectors) + sync = rs->md.resync_max_sectors; + + DMEMIT(" %llu/%llu", + (unsigned long long) sync, + (unsigned long long) rs->md.resync_max_sectors); + + break; + case STATUSTYPE_TABLE: + /* The string you would use to construct this array */ + for (i = 0; i < rs->md.raid_disks; i++) + if (rs->dev[i].data_dev && + !test_bit(In_sync, &rs->dev[i].rdev.flags)) + raid_param_cnt++; /* for rebuilds */ + + raid_param_cnt += (hweight64(rs->print_flags) * 2); + if (rs->print_flags & (DMPF_SYNC | DMPF_NOSYNC)) + raid_param_cnt--; + + DMEMIT("%s %u %u", rs->raid_type->name, + raid_param_cnt, rs->md.chunk_sectors); + + if ((rs->print_flags & DMPF_SYNC) && + (rs->md.recovery_cp == MaxSector)) + DMEMIT(" sync"); + if (rs->print_flags & DMPF_NOSYNC) + DMEMIT(" nosync"); + + for (i = 0; i < rs->md.raid_disks; i++) + if (rs->dev[i].data_dev && + !test_bit(In_sync, &rs->dev[i].rdev.flags)) + DMEMIT(" rebuild %u", i); + + if (rs->print_flags & DMPF_DAEMON_SLEEP) + DMEMIT(" daemon_sleep %lu", + rs->md.bitmap_info.daemon_sleep); + + if (rs->print_flags & DMPF_MIN_RECOVERY_RATE) + DMEMIT(" min_recovery_rate %d", rs->md.sync_speed_min); + + if (rs->print_flags & DMPF_MAX_RECOVERY_RATE) + DMEMIT(" max_recovery_rate %d", rs->md.sync_speed_max); + + if (rs->print_flags & DMPF_MAX_WRITE_BEHIND) + DMEMIT(" max_write_behind %lu", + rs->md.bitmap_info.max_write_behind); + + if (rs->print_flags & DMPF_STRIPE_CACHE) { + raid5_conf_t *conf = rs->md.private; + + /* convert from kiB to sectors */ + DMEMIT(" stripe_cache %d", + conf ? conf->max_nr_stripes * 2 : 0); + } + + DMEMIT(" %d", rs->md.raid_disks); + for (i = 0; i < rs->md.raid_disks; i++) { + DMEMIT(" -"); /* metadata device */ + + if (rs->dev[i].data_dev) + DMEMIT(" %s", rs->dev[i].data_dev->name); + else + DMEMIT(" -"); + } + } + + return 0; +} + +static int raid_iterate_devices(struct dm_target *ti, iterate_devices_callout_fn fn, void *data) +{ + struct raid_set *rs = ti->private; + unsigned i; + int ret = 0; + + for (i = 0; !ret && i < rs->md.raid_disks; i++) + if (rs->dev[i].data_dev) + ret = fn(ti, + rs->dev[i].data_dev, + 0, /* No offset on data devs */ + rs->md.dev_sectors, + data); + + return ret; +} + +static void raid_io_hints(struct dm_target *ti, struct queue_limits *limits) +{ + struct raid_set *rs = ti->private; + unsigned chunk_size = rs->md.chunk_sectors << 9; + raid5_conf_t *conf = rs->md.private; + + blk_limits_io_min(limits, chunk_size); + blk_limits_io_opt(limits, chunk_size * (conf->raid_disks - conf->max_degraded)); +} + +static void raid_presuspend(struct dm_target *ti) +{ + struct raid_set *rs = ti->private; + + md_stop_writes(&rs->md); +} + +static void raid_postsuspend(struct dm_target *ti) +{ + struct raid_set *rs = ti->private; + + mddev_suspend(&rs->md); +} + +static void raid_resume(struct dm_target *ti) +{ + struct raid_set *rs = ti->private; + + mddev_resume(&rs->md); +} + +static struct target_type raid_target = { + .name = "raid", + .version = {1, 0, 0}, + .module = THIS_MODULE, + .ctr = raid_ctr, + .dtr = raid_dtr, + .map = raid_map, + .status = raid_status, + .iterate_devices = raid_iterate_devices, + .io_hints = raid_io_hints, + .presuspend = raid_presuspend, + .postsuspend = raid_postsuspend, + .resume = raid_resume, +}; + +static int __init dm_raid_init(void) +{ + return dm_register_target(&raid_target); +} + +static void __exit dm_raid_exit(void) +{ + dm_unregister_target(&raid_target); +} + +module_init(dm_raid_init); +module_exit(dm_raid_exit); + +MODULE_DESCRIPTION(DM_NAME " raid4/5/6 target"); +MODULE_ALIAS("dm-raid4"); +MODULE_ALIAS("dm-raid5"); +MODULE_ALIAS("dm-raid6"); +MODULE_AUTHOR("Neil Brown "); +MODULE_LICENSE("GPL"); -- cgit v1.2.1 From 728674a7e466628df2aeec6d11a2ae1ef968fb67 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 13 Jan 2011 12:03:00 -0800 Subject: tty: move hvc drivers to drivers/tty/hvc/ As requested by Arnd Bergmann, the hvc drivers are now moved to the drivers/tty/hvc/ directory. The virtio_console.c driver was also moved, as it required the hvc_console.h file to be able to be built, and it really is a hvc driver. Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/char/Makefile | 13 - drivers/char/hvc_beat.c | 134 --- drivers/char/hvc_console.c | 914 ------------------- drivers/char/hvc_console.h | 119 --- drivers/char/hvc_dcc.c | 133 --- drivers/char/hvc_irq.c | 49 - drivers/char/hvc_iseries.c | 598 ------------- drivers/char/hvc_iucv.c | 1337 --------------------------- drivers/char/hvc_rtas.c | 133 --- drivers/char/hvc_tile.c | 68 -- drivers/char/hvc_udbg.c | 96 -- drivers/char/hvc_vio.c | 173 ---- drivers/char/hvc_xen.c | 271 ------ drivers/char/hvcs.c | 1604 --------------------------------- drivers/char/hvsi.c | 1314 --------------------------- drivers/char/virtio_console.c | 1838 -------------------------------------- drivers/tty/Makefile | 1 + drivers/tty/hvc/Makefile | 13 + drivers/tty/hvc/hvc_beat.c | 134 +++ drivers/tty/hvc/hvc_console.c | 914 +++++++++++++++++++ drivers/tty/hvc/hvc_console.h | 119 +++ drivers/tty/hvc/hvc_dcc.c | 133 +++ drivers/tty/hvc/hvc_irq.c | 49 + drivers/tty/hvc/hvc_iseries.c | 598 +++++++++++++ drivers/tty/hvc/hvc_iucv.c | 1337 +++++++++++++++++++++++++++ drivers/tty/hvc/hvc_rtas.c | 133 +++ drivers/tty/hvc/hvc_tile.c | 68 ++ drivers/tty/hvc/hvc_udbg.c | 96 ++ drivers/tty/hvc/hvc_vio.c | 173 ++++ drivers/tty/hvc/hvc_xen.c | 271 ++++++ drivers/tty/hvc/hvcs.c | 1604 +++++++++++++++++++++++++++++++++ drivers/tty/hvc/hvsi.c | 1314 +++++++++++++++++++++++++++ drivers/tty/hvc/virtio_console.c | 1838 ++++++++++++++++++++++++++++++++++++++ 33 files changed, 8795 insertions(+), 8794 deletions(-) delete mode 100644 drivers/char/hvc_beat.c delete mode 100644 drivers/char/hvc_console.c delete mode 100644 drivers/char/hvc_console.h delete mode 100644 drivers/char/hvc_dcc.c delete mode 100644 drivers/char/hvc_irq.c delete mode 100644 drivers/char/hvc_iseries.c delete mode 100644 drivers/char/hvc_iucv.c delete mode 100644 drivers/char/hvc_rtas.c delete mode 100644 drivers/char/hvc_tile.c delete mode 100644 drivers/char/hvc_udbg.c delete mode 100644 drivers/char/hvc_vio.c delete mode 100644 drivers/char/hvc_xen.c delete mode 100644 drivers/char/hvcs.c delete mode 100644 drivers/char/hvsi.c delete mode 100644 drivers/char/virtio_console.c create mode 100644 drivers/tty/hvc/Makefile create mode 100644 drivers/tty/hvc/hvc_beat.c create mode 100644 drivers/tty/hvc/hvc_console.c create mode 100644 drivers/tty/hvc/hvc_console.h create mode 100644 drivers/tty/hvc/hvc_dcc.c create mode 100644 drivers/tty/hvc/hvc_irq.c create mode 100644 drivers/tty/hvc/hvc_iseries.c create mode 100644 drivers/tty/hvc/hvc_iucv.c create mode 100644 drivers/tty/hvc/hvc_rtas.c create mode 100644 drivers/tty/hvc/hvc_tile.c create mode 100644 drivers/tty/hvc/hvc_udbg.c create mode 100644 drivers/tty/hvc/hvc_vio.c create mode 100644 drivers/tty/hvc/hvc_xen.c create mode 100644 drivers/tty/hvc/hvcs.c create mode 100644 drivers/tty/hvc/hvsi.c create mode 100644 drivers/tty/hvc/virtio_console.c (limited to 'drivers') diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 1e9dffb33778..5bc765d4c3ca 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -30,25 +30,12 @@ obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o obj-$(CONFIG_SX) += sx.o generic_serial.o obj-$(CONFIG_RIO) += rio/ generic_serial.o -obj-$(CONFIG_HVC_CONSOLE) += hvc_vio.o hvsi.o -obj-$(CONFIG_HVC_ISERIES) += hvc_iseries.o -obj-$(CONFIG_HVC_RTAS) += hvc_rtas.o -obj-$(CONFIG_HVC_TILE) += hvc_tile.o -obj-$(CONFIG_HVC_DCC) += hvc_dcc.o -obj-$(CONFIG_HVC_BEAT) += hvc_beat.o -obj-$(CONFIG_HVC_DRIVER) += hvc_console.o -obj-$(CONFIG_HVC_IRQ) += hvc_irq.o -obj-$(CONFIG_HVC_XEN) += hvc_xen.o -obj-$(CONFIG_HVC_IUCV) += hvc_iucv.o -obj-$(CONFIG_HVC_UDBG) += hvc_udbg.o -obj-$(CONFIG_VIRTIO_CONSOLE) += virtio_console.o obj-$(CONFIG_RAW_DRIVER) += raw.o obj-$(CONFIG_SGI_SNSC) += snsc.o snsc_event.o obj-$(CONFIG_MSPEC) += mspec.o obj-$(CONFIG_MMTIMER) += mmtimer.o obj-$(CONFIG_UV_MMTIMER) += uv_mmtimer.o obj-$(CONFIG_VIOTAPE) += viotape.o -obj-$(CONFIG_HVCS) += hvcs.o obj-$(CONFIG_IBM_BSR) += bsr.o obj-$(CONFIG_SGI_MBCS) += mbcs.o obj-$(CONFIG_BRIQ_PANEL) += briq_panel.o diff --git a/drivers/char/hvc_beat.c b/drivers/char/hvc_beat.c deleted file mode 100644 index 5fe4631e2a61..000000000000 --- a/drivers/char/hvc_beat.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * Beat hypervisor console driver - * - * (C) Copyright 2006 TOSHIBA CORPORATION - * - * This code is based on drivers/char/hvc_rtas.c: - * (C) Copyright IBM Corporation 2001-2005 - * (C) Copyright Red Hat, Inc. 2005 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "hvc_console.h" - -extern int64_t beat_get_term_char(uint64_t, uint64_t *, uint64_t *, uint64_t *); -extern int64_t beat_put_term_char(uint64_t, uint64_t, uint64_t, uint64_t); - -struct hvc_struct *hvc_beat_dev = NULL; - -/* bug: only one queue is available regardless of vtermno */ -static int hvc_beat_get_chars(uint32_t vtermno, char *buf, int cnt) -{ - static unsigned char q[sizeof(unsigned long) * 2] - __attribute__((aligned(sizeof(unsigned long)))); - static int qlen = 0; - u64 got; - -again: - if (qlen) { - if (qlen > cnt) { - memcpy(buf, q, cnt); - qlen -= cnt; - memmove(q + cnt, q, qlen); - return cnt; - } else { /* qlen <= cnt */ - int r; - - memcpy(buf, q, qlen); - r = qlen; - qlen = 0; - return r; - } - } - if (beat_get_term_char(vtermno, &got, - ((u64 *)q), ((u64 *)q) + 1) == 0) { - qlen = got; - goto again; - } - return 0; -} - -static int hvc_beat_put_chars(uint32_t vtermno, const char *buf, int cnt) -{ - unsigned long kb[2]; - int rest, nlen; - - for (rest = cnt; rest > 0; rest -= nlen) { - nlen = (rest > 16) ? 16 : rest; - memcpy(kb, buf, nlen); - beat_put_term_char(vtermno, nlen, kb[0], kb[1]); - buf += nlen; - } - return cnt; -} - -static const struct hv_ops hvc_beat_get_put_ops = { - .get_chars = hvc_beat_get_chars, - .put_chars = hvc_beat_put_chars, -}; - -static int hvc_beat_useit = 1; - -static int hvc_beat_config(char *p) -{ - hvc_beat_useit = simple_strtoul(p, NULL, 0); - return 0; -} - -static int __init hvc_beat_console_init(void) -{ - if (hvc_beat_useit && of_machine_is_compatible("Beat")) { - hvc_instantiate(0, 0, &hvc_beat_get_put_ops); - } - return 0; -} - -/* temp */ -static int __init hvc_beat_init(void) -{ - struct hvc_struct *hp; - - if (!firmware_has_feature(FW_FEATURE_BEAT)) - return -ENODEV; - - hp = hvc_alloc(0, NO_IRQ, &hvc_beat_get_put_ops, 16); - if (IS_ERR(hp)) - return PTR_ERR(hp); - hvc_beat_dev = hp; - return 0; -} - -static void __exit hvc_beat_exit(void) -{ - if (hvc_beat_dev) - hvc_remove(hvc_beat_dev); -} - -module_init(hvc_beat_init); -module_exit(hvc_beat_exit); - -__setup("hvc_beat=", hvc_beat_config); - -console_initcall(hvc_beat_console_init); diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c deleted file mode 100644 index e9cba13ee800..000000000000 --- a/drivers/char/hvc_console.c +++ /dev/null @@ -1,914 +0,0 @@ -/* - * Copyright (C) 2001 Anton Blanchard , IBM - * Copyright (C) 2001 Paul Mackerras , IBM - * Copyright (C) 2004 Benjamin Herrenschmidt , IBM Corp. - * Copyright (C) 2004 IBM Corporation - * - * Additional Author(s): - * Ryan S. Arnold - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "hvc_console.h" - -#define HVC_MAJOR 229 -#define HVC_MINOR 0 - -/* - * Wait this long per iteration while trying to push buffered data to the - * hypervisor before allowing the tty to complete a close operation. - */ -#define HVC_CLOSE_WAIT (HZ/100) /* 1/10 of a second */ - -/* - * These sizes are most efficient for vio, because they are the - * native transfer size. We could make them selectable in the - * future to better deal with backends that want other buffer sizes. - */ -#define N_OUTBUF 16 -#define N_INBUF 16 - -#define __ALIGNED__ __attribute__((__aligned__(sizeof(long)))) - -static struct tty_driver *hvc_driver; -static struct task_struct *hvc_task; - -/* Picks up late kicks after list walk but before schedule() */ -static int hvc_kicked; - -static int hvc_init(void); - -#ifdef CONFIG_MAGIC_SYSRQ -static int sysrq_pressed; -#endif - -/* dynamic list of hvc_struct instances */ -static LIST_HEAD(hvc_structs); - -/* - * Protect the list of hvc_struct instances from inserts and removals during - * list traversal. - */ -static DEFINE_SPINLOCK(hvc_structs_lock); - -/* - * This value is used to assign a tty->index value to a hvc_struct based - * upon order of exposure via hvc_probe(), when we can not match it to - * a console candidate registered with hvc_instantiate(). - */ -static int last_hvc = -1; - -/* - * Do not call this function with either the hvc_structs_lock or the hvc_struct - * lock held. If successful, this function increments the kref reference - * count against the target hvc_struct so it should be released when finished. - */ -static struct hvc_struct *hvc_get_by_index(int index) -{ - struct hvc_struct *hp; - unsigned long flags; - - spin_lock(&hvc_structs_lock); - - list_for_each_entry(hp, &hvc_structs, next) { - spin_lock_irqsave(&hp->lock, flags); - if (hp->index == index) { - kref_get(&hp->kref); - spin_unlock_irqrestore(&hp->lock, flags); - spin_unlock(&hvc_structs_lock); - return hp; - } - spin_unlock_irqrestore(&hp->lock, flags); - } - hp = NULL; - - spin_unlock(&hvc_structs_lock); - return hp; -} - - -/* - * Initial console vtermnos for console API usage prior to full console - * initialization. Any vty adapter outside this range will not have usable - * console interfaces but can still be used as a tty device. This has to be - * static because kmalloc will not work during early console init. - */ -static const struct hv_ops *cons_ops[MAX_NR_HVC_CONSOLES]; -static uint32_t vtermnos[MAX_NR_HVC_CONSOLES] = - {[0 ... MAX_NR_HVC_CONSOLES - 1] = -1}; - -/* - * Console APIs, NOT TTY. These APIs are available immediately when - * hvc_console_setup() finds adapters. - */ - -static void hvc_console_print(struct console *co, const char *b, - unsigned count) -{ - char c[N_OUTBUF] __ALIGNED__; - unsigned i = 0, n = 0; - int r, donecr = 0, index = co->index; - - /* Console access attempt outside of acceptable console range. */ - if (index >= MAX_NR_HVC_CONSOLES) - return; - - /* This console adapter was removed so it is not usable. */ - if (vtermnos[index] == -1) - return; - - while (count > 0 || i > 0) { - if (count > 0 && i < sizeof(c)) { - if (b[n] == '\n' && !donecr) { - c[i++] = '\r'; - donecr = 1; - } else { - c[i++] = b[n++]; - donecr = 0; - --count; - } - } else { - r = cons_ops[index]->put_chars(vtermnos[index], c, i); - if (r <= 0) { - /* throw away chars on error */ - i = 0; - } else if (r > 0) { - i -= r; - if (i > 0) - memmove(c, c+r, i); - } - } - } -} - -static struct tty_driver *hvc_console_device(struct console *c, int *index) -{ - if (vtermnos[c->index] == -1) - return NULL; - - *index = c->index; - return hvc_driver; -} - -static int __init hvc_console_setup(struct console *co, char *options) -{ - if (co->index < 0 || co->index >= MAX_NR_HVC_CONSOLES) - return -ENODEV; - - if (vtermnos[co->index] == -1) - return -ENODEV; - - return 0; -} - -static struct console hvc_console = { - .name = "hvc", - .write = hvc_console_print, - .device = hvc_console_device, - .setup = hvc_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -/* - * Early console initialization. Precedes driver initialization. - * - * (1) we are first, and the user specified another driver - * -- index will remain -1 - * (2) we are first and the user specified no driver - * -- index will be set to 0, then we will fail setup. - * (3) we are first and the user specified our driver - * -- index will be set to user specified driver, and we will fail - * (4) we are after driver, and this initcall will register us - * -- if the user didn't specify a driver then the console will match - * - * Note that for cases 2 and 3, we will match later when the io driver - * calls hvc_instantiate() and call register again. - */ -static int __init hvc_console_init(void) -{ - register_console(&hvc_console); - return 0; -} -console_initcall(hvc_console_init); - -/* callback when the kboject ref count reaches zero. */ -static void destroy_hvc_struct(struct kref *kref) -{ - struct hvc_struct *hp = container_of(kref, struct hvc_struct, kref); - unsigned long flags; - - spin_lock(&hvc_structs_lock); - - spin_lock_irqsave(&hp->lock, flags); - list_del(&(hp->next)); - spin_unlock_irqrestore(&hp->lock, flags); - - spin_unlock(&hvc_structs_lock); - - kfree(hp); -} - -/* - * hvc_instantiate() is an early console discovery method which locates - * consoles * prior to the vio subsystem discovering them. Hotplugged - * vty adapters do NOT get an hvc_instantiate() callback since they - * appear after early console init. - */ -int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops) -{ - struct hvc_struct *hp; - - if (index < 0 || index >= MAX_NR_HVC_CONSOLES) - return -1; - - if (vtermnos[index] != -1) - return -1; - - /* make sure no no tty has been registered in this index */ - hp = hvc_get_by_index(index); - if (hp) { - kref_put(&hp->kref, destroy_hvc_struct); - return -1; - } - - vtermnos[index] = vtermno; - cons_ops[index] = ops; - - /* reserve all indices up to and including this index */ - if (last_hvc < index) - last_hvc = index; - - /* if this index is what the user requested, then register - * now (setup won't fail at this point). It's ok to just - * call register again if previously .setup failed. - */ - if (index == hvc_console.index) - register_console(&hvc_console); - - return 0; -} -EXPORT_SYMBOL_GPL(hvc_instantiate); - -/* Wake the sleeping khvcd */ -void hvc_kick(void) -{ - hvc_kicked = 1; - wake_up_process(hvc_task); -} -EXPORT_SYMBOL_GPL(hvc_kick); - -static void hvc_unthrottle(struct tty_struct *tty) -{ - hvc_kick(); -} - -/* - * The TTY interface won't be used until after the vio layer has exposed the vty - * adapter to the kernel. - */ -static int hvc_open(struct tty_struct *tty, struct file * filp) -{ - struct hvc_struct *hp; - unsigned long flags; - int rc = 0; - - /* Auto increments kref reference if found. */ - if (!(hp = hvc_get_by_index(tty->index))) - return -ENODEV; - - spin_lock_irqsave(&hp->lock, flags); - /* Check and then increment for fast path open. */ - if (hp->count++ > 0) { - tty_kref_get(tty); - spin_unlock_irqrestore(&hp->lock, flags); - hvc_kick(); - return 0; - } /* else count == 0 */ - - tty->driver_data = hp; - - hp->tty = tty_kref_get(tty); - - spin_unlock_irqrestore(&hp->lock, flags); - - if (hp->ops->notifier_add) - rc = hp->ops->notifier_add(hp, hp->data); - - /* - * If the notifier fails we return an error. The tty layer - * will call hvc_close() after a failed open but we don't want to clean - * up there so we'll clean up here and clear out the previously set - * tty fields and return the kref reference. - */ - if (rc) { - spin_lock_irqsave(&hp->lock, flags); - hp->tty = NULL; - spin_unlock_irqrestore(&hp->lock, flags); - tty_kref_put(tty); - tty->driver_data = NULL; - kref_put(&hp->kref, destroy_hvc_struct); - printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc); - } - /* Force wakeup of the polling thread */ - hvc_kick(); - - return rc; -} - -static void hvc_close(struct tty_struct *tty, struct file * filp) -{ - struct hvc_struct *hp; - unsigned long flags; - - if (tty_hung_up_p(filp)) - return; - - /* - * No driver_data means that this close was issued after a failed - * hvc_open by the tty layer's release_dev() function and we can just - * exit cleanly because the kref reference wasn't made. - */ - if (!tty->driver_data) - return; - - hp = tty->driver_data; - - spin_lock_irqsave(&hp->lock, flags); - - if (--hp->count == 0) { - /* We are done with the tty pointer now. */ - hp->tty = NULL; - spin_unlock_irqrestore(&hp->lock, flags); - - if (hp->ops->notifier_del) - hp->ops->notifier_del(hp, hp->data); - - /* cancel pending tty resize work */ - cancel_work_sync(&hp->tty_resize); - - /* - * Chain calls chars_in_buffer() and returns immediately if - * there is no buffered data otherwise sleeps on a wait queue - * waking periodically to check chars_in_buffer(). - */ - tty_wait_until_sent(tty, HVC_CLOSE_WAIT); - } else { - if (hp->count < 0) - printk(KERN_ERR "hvc_close %X: oops, count is %d\n", - hp->vtermno, hp->count); - spin_unlock_irqrestore(&hp->lock, flags); - } - - tty_kref_put(tty); - kref_put(&hp->kref, destroy_hvc_struct); -} - -static void hvc_hangup(struct tty_struct *tty) -{ - struct hvc_struct *hp = tty->driver_data; - unsigned long flags; - int temp_open_count; - - if (!hp) - return; - - /* cancel pending tty resize work */ - cancel_work_sync(&hp->tty_resize); - - spin_lock_irqsave(&hp->lock, flags); - - /* - * The N_TTY line discipline has problems such that in a close vs - * open->hangup case this can be called after the final close so prevent - * that from happening for now. - */ - if (hp->count <= 0) { - spin_unlock_irqrestore(&hp->lock, flags); - return; - } - - temp_open_count = hp->count; - hp->count = 0; - hp->n_outbuf = 0; - hp->tty = NULL; - - spin_unlock_irqrestore(&hp->lock, flags); - - if (hp->ops->notifier_hangup) - hp->ops->notifier_hangup(hp, hp->data); - - while(temp_open_count) { - --temp_open_count; - tty_kref_put(tty); - kref_put(&hp->kref, destroy_hvc_struct); - } -} - -/* - * Push buffered characters whether they were just recently buffered or waiting - * on a blocked hypervisor. Call this function with hp->lock held. - */ -static int hvc_push(struct hvc_struct *hp) -{ - int n; - - n = hp->ops->put_chars(hp->vtermno, hp->outbuf, hp->n_outbuf); - if (n <= 0) { - if (n == 0) { - hp->do_wakeup = 1; - return 0; - } - /* throw away output on error; this happens when - there is no session connected to the vterm. */ - hp->n_outbuf = 0; - } else - hp->n_outbuf -= n; - if (hp->n_outbuf > 0) - memmove(hp->outbuf, hp->outbuf + n, hp->n_outbuf); - else - hp->do_wakeup = 1; - - return n; -} - -static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count) -{ - struct hvc_struct *hp = tty->driver_data; - unsigned long flags; - int rsize, written = 0; - - /* This write was probably executed during a tty close. */ - if (!hp) - return -EPIPE; - - if (hp->count <= 0) - return -EIO; - - spin_lock_irqsave(&hp->lock, flags); - - /* Push pending writes */ - if (hp->n_outbuf > 0) - hvc_push(hp); - - while (count > 0 && (rsize = hp->outbuf_size - hp->n_outbuf) > 0) { - if (rsize > count) - rsize = count; - memcpy(hp->outbuf + hp->n_outbuf, buf, rsize); - count -= rsize; - buf += rsize; - hp->n_outbuf += rsize; - written += rsize; - hvc_push(hp); - } - spin_unlock_irqrestore(&hp->lock, flags); - - /* - * Racy, but harmless, kick thread if there is still pending data. - */ - if (hp->n_outbuf) - hvc_kick(); - - return written; -} - -/** - * hvc_set_winsz() - Resize the hvc tty terminal window. - * @work: work structure. - * - * The routine shall not be called within an atomic context because it - * might sleep. - * - * Locking: hp->lock - */ -static void hvc_set_winsz(struct work_struct *work) -{ - struct hvc_struct *hp; - unsigned long hvc_flags; - struct tty_struct *tty; - struct winsize ws; - - hp = container_of(work, struct hvc_struct, tty_resize); - - spin_lock_irqsave(&hp->lock, hvc_flags); - if (!hp->tty) { - spin_unlock_irqrestore(&hp->lock, hvc_flags); - return; - } - ws = hp->ws; - tty = tty_kref_get(hp->tty); - spin_unlock_irqrestore(&hp->lock, hvc_flags); - - tty_do_resize(tty, &ws); - tty_kref_put(tty); -} - -/* - * This is actually a contract between the driver and the tty layer outlining - * how much write room the driver can guarantee will be sent OR BUFFERED. This - * driver MUST honor the return value. - */ -static int hvc_write_room(struct tty_struct *tty) -{ - struct hvc_struct *hp = tty->driver_data; - - if (!hp) - return -1; - - return hp->outbuf_size - hp->n_outbuf; -} - -static int hvc_chars_in_buffer(struct tty_struct *tty) -{ - struct hvc_struct *hp = tty->driver_data; - - if (!hp) - return 0; - return hp->n_outbuf; -} - -/* - * timeout will vary between the MIN and MAX values defined here. By default - * and during console activity we will use a default MIN_TIMEOUT of 10. When - * the console is idle, we increase the timeout value on each pass through - * msleep until we reach the max. This may be noticeable as a brief (average - * one second) delay on the console before the console responds to input when - * there has been no input for some time. - */ -#define MIN_TIMEOUT (10) -#define MAX_TIMEOUT (2000) -static u32 timeout = MIN_TIMEOUT; - -#define HVC_POLL_READ 0x00000001 -#define HVC_POLL_WRITE 0x00000002 - -int hvc_poll(struct hvc_struct *hp) -{ - struct tty_struct *tty; - int i, n, poll_mask = 0; - char buf[N_INBUF] __ALIGNED__; - unsigned long flags; - int read_total = 0; - int written_total = 0; - - spin_lock_irqsave(&hp->lock, flags); - - /* Push pending writes */ - if (hp->n_outbuf > 0) - written_total = hvc_push(hp); - - /* Reschedule us if still some write pending */ - if (hp->n_outbuf > 0) { - poll_mask |= HVC_POLL_WRITE; - /* If hvc_push() was not able to write, sleep a few msecs */ - timeout = (written_total) ? 0 : MIN_TIMEOUT; - } - - /* No tty attached, just skip */ - tty = tty_kref_get(hp->tty); - if (tty == NULL) - goto bail; - - /* Now check if we can get data (are we throttled ?) */ - if (test_bit(TTY_THROTTLED, &tty->flags)) - goto throttled; - - /* If we aren't notifier driven and aren't throttled, we always - * request a reschedule - */ - if (!hp->irq_requested) - poll_mask |= HVC_POLL_READ; - - /* Read data if any */ - for (;;) { - int count = tty_buffer_request_room(tty, N_INBUF); - - /* If flip is full, just reschedule a later read */ - if (count == 0) { - poll_mask |= HVC_POLL_READ; - break; - } - - n = hp->ops->get_chars(hp->vtermno, buf, count); - if (n <= 0) { - /* Hangup the tty when disconnected from host */ - if (n == -EPIPE) { - spin_unlock_irqrestore(&hp->lock, flags); - tty_hangup(tty); - spin_lock_irqsave(&hp->lock, flags); - } else if ( n == -EAGAIN ) { - /* - * Some back-ends can only ensure a certain min - * num of bytes read, which may be > 'count'. - * Let the tty clear the flip buff to make room. - */ - poll_mask |= HVC_POLL_READ; - } - break; - } - for (i = 0; i < n; ++i) { -#ifdef CONFIG_MAGIC_SYSRQ - if (hp->index == hvc_console.index) { - /* Handle the SysRq Hack */ - /* XXX should support a sequence */ - if (buf[i] == '\x0f') { /* ^O */ - /* if ^O is pressed again, reset - * sysrq_pressed and flip ^O char */ - sysrq_pressed = !sysrq_pressed; - if (sysrq_pressed) - continue; - } else if (sysrq_pressed) { - handle_sysrq(buf[i]); - sysrq_pressed = 0; - continue; - } - } -#endif /* CONFIG_MAGIC_SYSRQ */ - tty_insert_flip_char(tty, buf[i], 0); - } - - read_total += n; - } - throttled: - /* Wakeup write queue if necessary */ - if (hp->do_wakeup) { - hp->do_wakeup = 0; - tty_wakeup(tty); - } - bail: - spin_unlock_irqrestore(&hp->lock, flags); - - if (read_total) { - /* Activity is occurring, so reset the polling backoff value to - a minimum for performance. */ - timeout = MIN_TIMEOUT; - - tty_flip_buffer_push(tty); - } - if (tty) - tty_kref_put(tty); - - return poll_mask; -} -EXPORT_SYMBOL_GPL(hvc_poll); - -/** - * __hvc_resize() - Update terminal window size information. - * @hp: HVC console pointer - * @ws: Terminal window size structure - * - * Stores the specified window size information in the hvc structure of @hp. - * The function schedule the tty resize update. - * - * Locking: Locking free; the function MUST be called holding hp->lock - */ -void __hvc_resize(struct hvc_struct *hp, struct winsize ws) -{ - hp->ws = ws; - schedule_work(&hp->tty_resize); -} -EXPORT_SYMBOL_GPL(__hvc_resize); - -/* - * This kthread is either polling or interrupt driven. This is determined by - * calling hvc_poll() who determines whether a console adapter support - * interrupts. - */ -static int khvcd(void *unused) -{ - int poll_mask; - struct hvc_struct *hp; - - set_freezable(); - do { - poll_mask = 0; - hvc_kicked = 0; - try_to_freeze(); - wmb(); - if (!cpus_are_in_xmon()) { - spin_lock(&hvc_structs_lock); - list_for_each_entry(hp, &hvc_structs, next) { - poll_mask |= hvc_poll(hp); - } - spin_unlock(&hvc_structs_lock); - } else - poll_mask |= HVC_POLL_READ; - if (hvc_kicked) - continue; - set_current_state(TASK_INTERRUPTIBLE); - if (!hvc_kicked) { - if (poll_mask == 0) - schedule(); - else { - if (timeout < MAX_TIMEOUT) - timeout += (timeout >> 6) + 1; - - msleep_interruptible(timeout); - } - } - __set_current_state(TASK_RUNNING); - } while (!kthread_should_stop()); - - return 0; -} - -static const struct tty_operations hvc_ops = { - .open = hvc_open, - .close = hvc_close, - .write = hvc_write, - .hangup = hvc_hangup, - .unthrottle = hvc_unthrottle, - .write_room = hvc_write_room, - .chars_in_buffer = hvc_chars_in_buffer, -}; - -struct hvc_struct *hvc_alloc(uint32_t vtermno, int data, - const struct hv_ops *ops, - int outbuf_size) -{ - struct hvc_struct *hp; - int i; - - /* We wait until a driver actually comes along */ - if (!hvc_driver) { - int err = hvc_init(); - if (err) - return ERR_PTR(err); - } - - hp = kzalloc(ALIGN(sizeof(*hp), sizeof(long)) + outbuf_size, - GFP_KERNEL); - if (!hp) - return ERR_PTR(-ENOMEM); - - hp->vtermno = vtermno; - hp->data = data; - hp->ops = ops; - hp->outbuf_size = outbuf_size; - hp->outbuf = &((char *)hp)[ALIGN(sizeof(*hp), sizeof(long))]; - - kref_init(&hp->kref); - - INIT_WORK(&hp->tty_resize, hvc_set_winsz); - spin_lock_init(&hp->lock); - spin_lock(&hvc_structs_lock); - - /* - * find index to use: - * see if this vterm id matches one registered for console. - */ - for (i=0; i < MAX_NR_HVC_CONSOLES; i++) - if (vtermnos[i] == hp->vtermno && - cons_ops[i] == hp->ops) - break; - - /* no matching slot, just use a counter */ - if (i >= MAX_NR_HVC_CONSOLES) - i = ++last_hvc; - - hp->index = i; - - list_add_tail(&(hp->next), &hvc_structs); - spin_unlock(&hvc_structs_lock); - - return hp; -} -EXPORT_SYMBOL_GPL(hvc_alloc); - -int hvc_remove(struct hvc_struct *hp) -{ - unsigned long flags; - struct tty_struct *tty; - - spin_lock_irqsave(&hp->lock, flags); - tty = tty_kref_get(hp->tty); - - if (hp->index < MAX_NR_HVC_CONSOLES) - vtermnos[hp->index] = -1; - - /* Don't whack hp->irq because tty_hangup() will need to free the irq. */ - - spin_unlock_irqrestore(&hp->lock, flags); - - /* - * We 'put' the instance that was grabbed when the kref instance - * was initialized using kref_init(). Let the last holder of this - * kref cause it to be removed, which will probably be the tty_vhangup - * below. - */ - kref_put(&hp->kref, destroy_hvc_struct); - - /* - * This function call will auto chain call hvc_hangup. - */ - if (tty) { - tty_vhangup(tty); - tty_kref_put(tty); - } - return 0; -} -EXPORT_SYMBOL_GPL(hvc_remove); - -/* Driver initialization: called as soon as someone uses hvc_alloc(). */ -static int hvc_init(void) -{ - struct tty_driver *drv; - int err; - - /* We need more than hvc_count adapters due to hotplug additions. */ - drv = alloc_tty_driver(HVC_ALLOC_TTY_ADAPTERS); - if (!drv) { - err = -ENOMEM; - goto out; - } - - drv->owner = THIS_MODULE; - drv->driver_name = "hvc"; - drv->name = "hvc"; - drv->major = HVC_MAJOR; - drv->minor_start = HVC_MINOR; - drv->type = TTY_DRIVER_TYPE_SYSTEM; - drv->init_termios = tty_std_termios; - drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS; - tty_set_operations(drv, &hvc_ops); - - /* Always start the kthread because there can be hotplug vty adapters - * added later. */ - hvc_task = kthread_run(khvcd, NULL, "khvcd"); - if (IS_ERR(hvc_task)) { - printk(KERN_ERR "Couldn't create kthread for console.\n"); - err = PTR_ERR(hvc_task); - goto put_tty; - } - - err = tty_register_driver(drv); - if (err) { - printk(KERN_ERR "Couldn't register hvc console driver\n"); - goto stop_thread; - } - - /* - * Make sure tty is fully registered before allowing it to be - * found by hvc_console_device. - */ - smp_mb(); - hvc_driver = drv; - return 0; - -stop_thread: - kthread_stop(hvc_task); - hvc_task = NULL; -put_tty: - put_tty_driver(drv); -out: - return err; -} - -/* This isn't particularly necessary due to this being a console driver - * but it is nice to be thorough. - */ -static void __exit hvc_exit(void) -{ - if (hvc_driver) { - kthread_stop(hvc_task); - - tty_unregister_driver(hvc_driver); - /* return tty_struct instances allocated in hvc_init(). */ - put_tty_driver(hvc_driver); - unregister_console(&hvc_console); - } -} -module_exit(hvc_exit); diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h deleted file mode 100644 index 54381eba4e4a..000000000000 --- a/drivers/char/hvc_console.h +++ /dev/null @@ -1,119 +0,0 @@ -/* - * hvc_console.h - * Copyright (C) 2005 IBM Corporation - * - * Author(s): - * Ryan S. Arnold - * - * hvc_console header information: - * moved here from arch/powerpc/include/asm/hvconsole.h - * and drivers/char/hvc_console.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef HVC_CONSOLE_H -#define HVC_CONSOLE_H -#include -#include -#include - -/* - * This is the max number of console adapters that can/will be found as - * console devices on first stage console init. Any number beyond this range - * can't be used as a console device but is still a valid tty device. - */ -#define MAX_NR_HVC_CONSOLES 16 - -/* - * The Linux TTY code does not support dynamic addition of tty derived devices - * so we need to know how many tty devices we might need when space is allocated - * for the tty device. Since this driver supports hotplug of vty adapters we - * need to make sure we have enough allocated. - */ -#define HVC_ALLOC_TTY_ADAPTERS 8 - -struct hvc_struct { - spinlock_t lock; - int index; - struct tty_struct *tty; - int count; - int do_wakeup; - char *outbuf; - int outbuf_size; - int n_outbuf; - uint32_t vtermno; - const struct hv_ops *ops; - int irq_requested; - int data; - struct winsize ws; - struct work_struct tty_resize; - struct list_head next; - struct kref kref; /* ref count & hvc_struct lifetime */ -}; - -/* implemented by a low level driver */ -struct hv_ops { - int (*get_chars)(uint32_t vtermno, char *buf, int count); - int (*put_chars)(uint32_t vtermno, const char *buf, int count); - - /* Callbacks for notification. Called in open, close and hangup */ - int (*notifier_add)(struct hvc_struct *hp, int irq); - void (*notifier_del)(struct hvc_struct *hp, int irq); - void (*notifier_hangup)(struct hvc_struct *hp, int irq); -}; - -/* Register a vterm and a slot index for use as a console (console_init) */ -extern int hvc_instantiate(uint32_t vtermno, int index, - const struct hv_ops *ops); - -/* register a vterm for hvc tty operation (module_init or hotplug add) */ -extern struct hvc_struct * hvc_alloc(uint32_t vtermno, int data, - const struct hv_ops *ops, int outbuf_size); -/* remove a vterm from hvc tty operation (module_exit or hotplug remove) */ -extern int hvc_remove(struct hvc_struct *hp); - -/* data available */ -int hvc_poll(struct hvc_struct *hp); -void hvc_kick(void); - -/* Resize hvc tty terminal window */ -extern void __hvc_resize(struct hvc_struct *hp, struct winsize ws); - -static inline void hvc_resize(struct hvc_struct *hp, struct winsize ws) -{ - unsigned long flags; - - spin_lock_irqsave(&hp->lock, flags); - __hvc_resize(hp, ws); - spin_unlock_irqrestore(&hp->lock, flags); -} - -/* default notifier for irq based notification */ -extern int notifier_add_irq(struct hvc_struct *hp, int data); -extern void notifier_del_irq(struct hvc_struct *hp, int data); -extern void notifier_hangup_irq(struct hvc_struct *hp, int data); - - -#if defined(CONFIG_XMON) && defined(CONFIG_SMP) -#include -#else -static inline int cpus_are_in_xmon(void) -{ - return 0; -} -#endif - -#endif // HVC_CONSOLE_H diff --git a/drivers/char/hvc_dcc.c b/drivers/char/hvc_dcc.c deleted file mode 100644 index 6470f63deb4b..000000000000 --- a/drivers/char/hvc_dcc.c +++ /dev/null @@ -1,133 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include - -#include - -#include "hvc_console.h" - -/* DCC Status Bits */ -#define DCC_STATUS_RX (1 << 30) -#define DCC_STATUS_TX (1 << 29) - -static inline u32 __dcc_getstatus(void) -{ - u32 __ret; - - asm("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg" - : "=r" (__ret) : : "cc"); - - return __ret; -} - - -#if defined(CONFIG_CPU_V7) -static inline char __dcc_getchar(void) -{ - char __c; - - asm("get_wait: mrc p14, 0, pc, c0, c1, 0 \n\ - bne get_wait \n\ - mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" - : "=r" (__c) : : "cc"); - - return __c; -} -#else -static inline char __dcc_getchar(void) -{ - char __c; - - asm("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" - : "=r" (__c)); - - return __c; -} -#endif - -#if defined(CONFIG_CPU_V7) -static inline void __dcc_putchar(char c) -{ - asm("put_wait: mrc p14, 0, pc, c0, c1, 0 \n\ - bcs put_wait \n\ - mcr p14, 0, %0, c0, c5, 0 " - : : "r" (c) : "cc"); -} -#else -static inline void __dcc_putchar(char c) -{ - asm("mcr p14, 0, %0, c0, c5, 0 @ write a char" - : /* no output register */ - : "r" (c)); -} -#endif - -static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count) -{ - int i; - - for (i = 0; i < count; i++) { - while (__dcc_getstatus() & DCC_STATUS_TX) - cpu_relax(); - - __dcc_putchar((char)(buf[i] & 0xFF)); - } - - return count; -} - -static int hvc_dcc_get_chars(uint32_t vt, char *buf, int count) -{ - int i; - - for (i = 0; i < count; ++i) { - int c = -1; - - if (__dcc_getstatus() & DCC_STATUS_RX) - c = __dcc_getchar(); - if (c < 0) - break; - buf[i] = c; - } - - return i; -} - -static const struct hv_ops hvc_dcc_get_put_ops = { - .get_chars = hvc_dcc_get_chars, - .put_chars = hvc_dcc_put_chars, -}; - -static int __init hvc_dcc_console_init(void) -{ - hvc_instantiate(0, 0, &hvc_dcc_get_put_ops); - return 0; -} -console_initcall(hvc_dcc_console_init); - -static int __init hvc_dcc_init(void) -{ - hvc_alloc(0, 0, &hvc_dcc_get_put_ops, 128); - return 0; -} -device_initcall(hvc_dcc_init); diff --git a/drivers/char/hvc_irq.c b/drivers/char/hvc_irq.c deleted file mode 100644 index 2623e177e8d6..000000000000 --- a/drivers/char/hvc_irq.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright IBM Corp. 2001,2008 - * - * This file contains the IRQ specific code for hvc_console - * - */ - -#include - -#include "hvc_console.h" - -static irqreturn_t hvc_handle_interrupt(int irq, void *dev_instance) -{ - /* if hvc_poll request a repoll, then kick the hvcd thread */ - if (hvc_poll(dev_instance)) - hvc_kick(); - return IRQ_HANDLED; -} - -/* - * For IRQ based systems these callbacks can be used - */ -int notifier_add_irq(struct hvc_struct *hp, int irq) -{ - int rc; - - if (!irq) { - hp->irq_requested = 0; - return 0; - } - rc = request_irq(irq, hvc_handle_interrupt, IRQF_DISABLED, - "hvc_console", hp); - if (!rc) - hp->irq_requested = 1; - return rc; -} - -void notifier_del_irq(struct hvc_struct *hp, int irq) -{ - if (!hp->irq_requested) - return; - free_irq(irq, hp); - hp->irq_requested = 0; -} - -void notifier_hangup_irq(struct hvc_struct *hp, int irq) -{ - notifier_del_irq(hp, irq); -} diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c deleted file mode 100644 index 21c54955084e..000000000000 --- a/drivers/char/hvc_iseries.c +++ /dev/null @@ -1,598 +0,0 @@ -/* - * iSeries vio driver interface to hvc_console.c - * - * This code is based heavily on hvc_vio.c and viocons.c - * - * Copyright (C) 2006 Stephen Rothwell, IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "hvc_console.h" - -#define VTTY_PORTS 10 - -static DEFINE_SPINLOCK(consolelock); -static DEFINE_SPINLOCK(consoleloglock); - -static const char hvc_driver_name[] = "hvc_console"; - -#define IN_BUF_SIZE 200 - -/* - * Our port information. - */ -static struct port_info { - HvLpIndex lp; - u64 seq; /* sequence number of last HV send */ - u64 ack; /* last ack from HV */ - struct hvc_struct *hp; - int in_start; - int in_end; - unsigned char in_buf[IN_BUF_SIZE]; -} port_info[VTTY_PORTS] = { - [ 0 ... VTTY_PORTS - 1 ] = { - .lp = HvLpIndexInvalid - } -}; - -#define viochar_is_console(pi) ((pi) == &port_info[0]) - -static struct vio_device_id hvc_driver_table[] __devinitdata = { - {"serial", "IBM,iSeries-vty"}, - { "", "" } -}; -MODULE_DEVICE_TABLE(vio, hvc_driver_table); - -static void hvlog(char *fmt, ...) -{ - int i; - unsigned long flags; - va_list args; - static char buf[256]; - - spin_lock_irqsave(&consoleloglock, flags); - va_start(args, fmt); - i = vscnprintf(buf, sizeof(buf) - 1, fmt, args); - va_end(args); - buf[i++] = '\r'; - HvCall_writeLogBuffer(buf, i); - spin_unlock_irqrestore(&consoleloglock, flags); -} - -/* - * Initialize the common fields in a charLpEvent - */ -static void init_data_event(struct viocharlpevent *viochar, HvLpIndex lp) -{ - struct HvLpEvent *hev = &viochar->event; - - memset(viochar, 0, sizeof(struct viocharlpevent)); - - hev->flags = HV_LP_EVENT_VALID | HV_LP_EVENT_DEFERRED_ACK | - HV_LP_EVENT_INT; - hev->xType = HvLpEvent_Type_VirtualIo; - hev->xSubtype = viomajorsubtype_chario | viochardata; - hev->xSourceLp = HvLpConfig_getLpIndex(); - hev->xTargetLp = lp; - hev->xSizeMinus1 = sizeof(struct viocharlpevent); - hev->xSourceInstanceId = viopath_sourceinst(lp); - hev->xTargetInstanceId = viopath_targetinst(lp); -} - -static int get_chars(uint32_t vtermno, char *buf, int count) -{ - struct port_info *pi; - int n = 0; - unsigned long flags; - - if (vtermno >= VTTY_PORTS) - return -EINVAL; - if (count == 0) - return 0; - - pi = &port_info[vtermno]; - spin_lock_irqsave(&consolelock, flags); - - if (pi->in_end == 0) - goto done; - - n = pi->in_end - pi->in_start; - if (n > count) - n = count; - memcpy(buf, &pi->in_buf[pi->in_start], n); - pi->in_start += n; - if (pi->in_start == pi->in_end) { - pi->in_start = 0; - pi->in_end = 0; - } -done: - spin_unlock_irqrestore(&consolelock, flags); - return n; -} - -static int put_chars(uint32_t vtermno, const char *buf, int count) -{ - struct viocharlpevent *viochar; - struct port_info *pi; - HvLpEvent_Rc hvrc; - unsigned long flags; - int sent = 0; - - if (vtermno >= VTTY_PORTS) - return -EINVAL; - - pi = &port_info[vtermno]; - - spin_lock_irqsave(&consolelock, flags); - - if (viochar_is_console(pi) && !viopath_isactive(pi->lp)) { - HvCall_writeLogBuffer(buf, count); - sent = count; - goto done; - } - - viochar = vio_get_event_buffer(viomajorsubtype_chario); - if (viochar == NULL) { - hvlog("\n\rviocons: Can't get viochar buffer."); - goto done; - } - - while ((count > 0) && ((pi->seq - pi->ack) < VIOCHAR_WINDOW)) { - int len; - - len = (count > VIOCHAR_MAX_DATA) ? VIOCHAR_MAX_DATA : count; - - if (viochar_is_console(pi)) - HvCall_writeLogBuffer(buf, len); - - init_data_event(viochar, pi->lp); - - viochar->len = len; - viochar->event.xCorrelationToken = pi->seq++; - viochar->event.xSizeMinus1 = - offsetof(struct viocharlpevent, data) + len; - - memcpy(viochar->data, buf, len); - - hvrc = HvCallEvent_signalLpEvent(&viochar->event); - if (hvrc) - hvlog("\n\rerror sending event! return code %d\n\r", - (int)hvrc); - sent += len; - count -= len; - buf += len; - } - - vio_free_event_buffer(viomajorsubtype_chario, viochar); -done: - spin_unlock_irqrestore(&consolelock, flags); - return sent; -} - -static const struct hv_ops hvc_get_put_ops = { - .get_chars = get_chars, - .put_chars = put_chars, - .notifier_add = notifier_add_irq, - .notifier_del = notifier_del_irq, - .notifier_hangup = notifier_hangup_irq, -}; - -static int __devinit hvc_vio_probe(struct vio_dev *vdev, - const struct vio_device_id *id) -{ - struct hvc_struct *hp; - struct port_info *pi; - - /* probed with invalid parameters. */ - if (!vdev || !id) - return -EPERM; - - if (vdev->unit_address >= VTTY_PORTS) - return -ENODEV; - - pi = &port_info[vdev->unit_address]; - - hp = hvc_alloc(vdev->unit_address, vdev->irq, &hvc_get_put_ops, - VIOCHAR_MAX_DATA); - if (IS_ERR(hp)) - return PTR_ERR(hp); - pi->hp = hp; - dev_set_drvdata(&vdev->dev, pi); - - return 0; -} - -static int __devexit hvc_vio_remove(struct vio_dev *vdev) -{ - struct port_info *pi = dev_get_drvdata(&vdev->dev); - struct hvc_struct *hp = pi->hp; - - return hvc_remove(hp); -} - -static struct vio_driver hvc_vio_driver = { - .id_table = hvc_driver_table, - .probe = hvc_vio_probe, - .remove = __devexit_p(hvc_vio_remove), - .driver = { - .name = hvc_driver_name, - .owner = THIS_MODULE, - } -}; - -static void hvc_open_event(struct HvLpEvent *event) -{ - unsigned long flags; - struct viocharlpevent *cevent = (struct viocharlpevent *)event; - u8 port = cevent->virtual_device; - struct port_info *pi; - int reject = 0; - - if (hvlpevent_is_ack(event)) { - if (port >= VTTY_PORTS) - return; - - spin_lock_irqsave(&consolelock, flags); - - pi = &port_info[port]; - if (event->xRc == HvLpEvent_Rc_Good) { - pi->seq = pi->ack = 0; - /* - * This line allows connections from the primary - * partition but once one is connected from the - * primary partition nothing short of a reboot - * of linux will allow access from the hosting - * partition again without a required iSeries fix. - */ - pi->lp = event->xTargetLp; - } - - spin_unlock_irqrestore(&consolelock, flags); - if (event->xRc != HvLpEvent_Rc_Good) - printk(KERN_WARNING - "hvc: handle_open_event: event->xRc == (%d).\n", - event->xRc); - - if (event->xCorrelationToken != 0) { - atomic_t *aptr= (atomic_t *)event->xCorrelationToken; - atomic_set(aptr, 1); - } else - printk(KERN_WARNING - "hvc: weird...got open ack without atomic\n"); - return; - } - - /* This had better require an ack, otherwise complain */ - if (!hvlpevent_need_ack(event)) { - printk(KERN_WARNING "hvc: viocharopen without ack bit!\n"); - return; - } - - spin_lock_irqsave(&consolelock, flags); - - /* Make sure this is a good virtual tty */ - if (port >= VTTY_PORTS) { - event->xRc = HvLpEvent_Rc_SubtypeError; - cevent->subtype_result_code = viorc_openRejected; - /* - * Flag state here since we can't printk while holding - * the consolelock spinlock. - */ - reject = 1; - } else { - pi = &port_info[port]; - if ((pi->lp != HvLpIndexInvalid) && - (pi->lp != event->xSourceLp)) { - /* - * If this is tty is already connected to a different - * partition, fail. - */ - event->xRc = HvLpEvent_Rc_SubtypeError; - cevent->subtype_result_code = viorc_openRejected; - reject = 2; - } else { - pi->lp = event->xSourceLp; - event->xRc = HvLpEvent_Rc_Good; - cevent->subtype_result_code = viorc_good; - pi->seq = pi->ack = 0; - } - } - - spin_unlock_irqrestore(&consolelock, flags); - - if (reject == 1) - printk(KERN_WARNING "hvc: open rejected: bad virtual tty.\n"); - else if (reject == 2) - printk(KERN_WARNING "hvc: open rejected: console in exclusive " - "use by another partition.\n"); - - /* Return the acknowledgement */ - HvCallEvent_ackLpEvent(event); -} - -/* - * Handle a close charLpEvent. This should ONLY be an Interrupt because the - * virtual console should never actually issue a close event to the hypervisor - * because the virtual console never goes away. A close event coming from the - * hypervisor simply means that there are no client consoles connected to the - * virtual console. - */ -static void hvc_close_event(struct HvLpEvent *event) -{ - unsigned long flags; - struct viocharlpevent *cevent = (struct viocharlpevent *)event; - u8 port = cevent->virtual_device; - - if (!hvlpevent_is_int(event)) { - printk(KERN_WARNING - "hvc: got unexpected close acknowledgement\n"); - return; - } - - if (port >= VTTY_PORTS) { - printk(KERN_WARNING - "hvc: close message from invalid virtual device.\n"); - return; - } - - /* For closes, just mark the console partition invalid */ - spin_lock_irqsave(&consolelock, flags); - - if (port_info[port].lp == event->xSourceLp) - port_info[port].lp = HvLpIndexInvalid; - - spin_unlock_irqrestore(&consolelock, flags); -} - -static void hvc_data_event(struct HvLpEvent *event) -{ - unsigned long flags; - struct viocharlpevent *cevent = (struct viocharlpevent *)event; - struct port_info *pi; - int n; - u8 port = cevent->virtual_device; - - if (port >= VTTY_PORTS) { - printk(KERN_WARNING "hvc: data on invalid virtual device %d\n", - port); - return; - } - if (cevent->len == 0) - return; - - /* - * Change 05/01/2003 - Ryan Arnold: If a partition other than - * the current exclusive partition tries to send us data - * events then just drop them on the floor because we don't - * want his stinking data. He isn't authorized to receive - * data because he wasn't the first one to get the console, - * therefore he shouldn't be allowed to send data either. - * This will work without an iSeries fix. - */ - pi = &port_info[port]; - if (pi->lp != event->xSourceLp) - return; - - spin_lock_irqsave(&consolelock, flags); - - n = IN_BUF_SIZE - pi->in_end; - if (n > cevent->len) - n = cevent->len; - if (n > 0) { - memcpy(&pi->in_buf[pi->in_end], cevent->data, n); - pi->in_end += n; - } - spin_unlock_irqrestore(&consolelock, flags); - if (n == 0) - printk(KERN_WARNING "hvc: input buffer overflow\n"); -} - -static void hvc_ack_event(struct HvLpEvent *event) -{ - struct viocharlpevent *cevent = (struct viocharlpevent *)event; - unsigned long flags; - u8 port = cevent->virtual_device; - - if (port >= VTTY_PORTS) { - printk(KERN_WARNING "hvc: data on invalid virtual device\n"); - return; - } - - spin_lock_irqsave(&consolelock, flags); - port_info[port].ack = event->xCorrelationToken; - spin_unlock_irqrestore(&consolelock, flags); -} - -static void hvc_config_event(struct HvLpEvent *event) -{ - struct viocharlpevent *cevent = (struct viocharlpevent *)event; - - if (cevent->data[0] == 0x01) - printk(KERN_INFO "hvc: window resized to %d: %d: %d: %d\n", - cevent->data[1], cevent->data[2], - cevent->data[3], cevent->data[4]); - else - printk(KERN_WARNING "hvc: unknown config event\n"); -} - -static void hvc_handle_event(struct HvLpEvent *event) -{ - int charminor; - - if (event == NULL) - return; - - charminor = event->xSubtype & VIOMINOR_SUBTYPE_MASK; - switch (charminor) { - case viocharopen: - hvc_open_event(event); - break; - case viocharclose: - hvc_close_event(event); - break; - case viochardata: - hvc_data_event(event); - break; - case viocharack: - hvc_ack_event(event); - break; - case viocharconfig: - hvc_config_event(event); - break; - default: - if (hvlpevent_is_int(event) && hvlpevent_need_ack(event)) { - event->xRc = HvLpEvent_Rc_InvalidSubtype; - HvCallEvent_ackLpEvent(event); - } - } -} - -static int __init send_open(HvLpIndex remoteLp, void *sem) -{ - return HvCallEvent_signalLpEventFast(remoteLp, - HvLpEvent_Type_VirtualIo, - viomajorsubtype_chario | viocharopen, - HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, - viopath_sourceinst(remoteLp), - viopath_targetinst(remoteLp), - (u64)(unsigned long)sem, VIOVERSION << 16, - 0, 0, 0, 0); -} - -static int __init hvc_vio_init(void) -{ - atomic_t wait_flag; - int rc; - - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - return -EIO; - - /* +2 for fudge */ - rc = viopath_open(HvLpConfig_getPrimaryLpIndex(), - viomajorsubtype_chario, VIOCHAR_WINDOW + 2); - if (rc) - printk(KERN_WARNING "hvc: error opening to primary %d\n", rc); - - if (viopath_hostLp == HvLpIndexInvalid) - vio_set_hostlp(); - - /* - * And if the primary is not the same as the hosting LP, open to the - * hosting lp - */ - if ((viopath_hostLp != HvLpIndexInvalid) && - (viopath_hostLp != HvLpConfig_getPrimaryLpIndex())) { - printk(KERN_INFO "hvc: open path to hosting (%d)\n", - viopath_hostLp); - rc = viopath_open(viopath_hostLp, viomajorsubtype_chario, - VIOCHAR_WINDOW + 2); /* +2 for fudge */ - if (rc) - printk(KERN_WARNING - "error opening to partition %d: %d\n", - viopath_hostLp, rc); - } - - if (vio_setHandler(viomajorsubtype_chario, hvc_handle_event) < 0) - printk(KERN_WARNING - "hvc: error seting handler for console events!\n"); - - /* - * First, try to open the console to the hosting lp. - * Wait on a semaphore for the response. - */ - atomic_set(&wait_flag, 0); - if ((viopath_isactive(viopath_hostLp)) && - (send_open(viopath_hostLp, &wait_flag) == 0)) { - printk(KERN_INFO "hvc: hosting partition %d\n", viopath_hostLp); - while (atomic_read(&wait_flag) == 0) - mb(); - atomic_set(&wait_flag, 0); - } - - /* - * If we don't have an active console, try the primary - */ - if ((!viopath_isactive(port_info[0].lp)) && - (viopath_isactive(HvLpConfig_getPrimaryLpIndex())) && - (send_open(HvLpConfig_getPrimaryLpIndex(), &wait_flag) == 0)) { - printk(KERN_INFO "hvc: opening console to primary partition\n"); - while (atomic_read(&wait_flag) == 0) - mb(); - } - - /* Register as a vio device to receive callbacks */ - rc = vio_register_driver(&hvc_vio_driver); - - return rc; -} -module_init(hvc_vio_init); /* after drivers/char/hvc_console.c */ - -static void __exit hvc_vio_exit(void) -{ - vio_unregister_driver(&hvc_vio_driver); -} -module_exit(hvc_vio_exit); - -/* the device tree order defines our numbering */ -static int __init hvc_find_vtys(void) -{ - struct device_node *vty; - int num_found = 0; - - for (vty = of_find_node_by_name(NULL, "vty"); vty != NULL; - vty = of_find_node_by_name(vty, "vty")) { - const uint32_t *vtermno; - - /* We have statically defined space for only a certain number - * of console adapters. - */ - if ((num_found >= MAX_NR_HVC_CONSOLES) || - (num_found >= VTTY_PORTS)) { - of_node_put(vty); - break; - } - - vtermno = of_get_property(vty, "reg", NULL); - if (!vtermno) - continue; - - if (!of_device_is_compatible(vty, "IBM,iSeries-vty")) - continue; - - if (num_found == 0) - add_preferred_console("hvc", 0, NULL); - hvc_instantiate(*vtermno, num_found, &hvc_get_put_ops); - ++num_found; - } - - return num_found; -} -console_initcall(hvc_find_vtys); diff --git a/drivers/char/hvc_iucv.c b/drivers/char/hvc_iucv.c deleted file mode 100644 index c3425bb3a1f6..000000000000 --- a/drivers/char/hvc_iucv.c +++ /dev/null @@ -1,1337 +0,0 @@ -/* - * hvc_iucv.c - z/VM IUCV hypervisor console (HVC) device driver - * - * This HVC device driver provides terminal access using - * z/VM IUCV communication paths. - * - * Copyright IBM Corp. 2008, 2009 - * - * Author(s): Hendrik Brueckner - */ -#define KMSG_COMPONENT "hvc_iucv" -#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "hvc_console.h" - - -/* General device driver settings */ -#define HVC_IUCV_MAGIC 0xc9e4c3e5 -#define MAX_HVC_IUCV_LINES HVC_ALLOC_TTY_ADAPTERS -#define MEMPOOL_MIN_NR (PAGE_SIZE / sizeof(struct iucv_tty_buffer)/4) - -/* IUCV TTY message */ -#define MSG_VERSION 0x02 /* Message version */ -#define MSG_TYPE_ERROR 0x01 /* Error message */ -#define MSG_TYPE_TERMENV 0x02 /* Terminal environment variable */ -#define MSG_TYPE_TERMIOS 0x04 /* Terminal IO struct update */ -#define MSG_TYPE_WINSIZE 0x08 /* Terminal window size update */ -#define MSG_TYPE_DATA 0x10 /* Terminal data */ - -struct iucv_tty_msg { - u8 version; /* Message version */ - u8 type; /* Message type */ -#define MSG_MAX_DATALEN ((u16)(~0)) - u16 datalen; /* Payload length */ - u8 data[]; /* Payload buffer */ -} __attribute__((packed)); -#define MSG_SIZE(s) ((s) + offsetof(struct iucv_tty_msg, data)) - -enum iucv_state_t { - IUCV_DISCONN = 0, - IUCV_CONNECTED = 1, - IUCV_SEVERED = 2, -}; - -enum tty_state_t { - TTY_CLOSED = 0, - TTY_OPENED = 1, -}; - -struct hvc_iucv_private { - struct hvc_struct *hvc; /* HVC struct reference */ - u8 srv_name[8]; /* IUCV service name (ebcdic) */ - unsigned char is_console; /* Linux console usage flag */ - enum iucv_state_t iucv_state; /* IUCV connection status */ - enum tty_state_t tty_state; /* TTY status */ - struct iucv_path *path; /* IUCV path pointer */ - spinlock_t lock; /* hvc_iucv_private lock */ -#define SNDBUF_SIZE (PAGE_SIZE) /* must be < MSG_MAX_DATALEN */ - void *sndbuf; /* send buffer */ - size_t sndbuf_len; /* length of send buffer */ -#define QUEUE_SNDBUF_DELAY (HZ / 25) - struct delayed_work sndbuf_work; /* work: send iucv msg(s) */ - wait_queue_head_t sndbuf_waitq; /* wait for send completion */ - struct list_head tty_outqueue; /* outgoing IUCV messages */ - struct list_head tty_inqueue; /* incoming IUCV messages */ - struct device *dev; /* device structure */ -}; - -struct iucv_tty_buffer { - struct list_head list; /* list pointer */ - struct iucv_message msg; /* store an IUCV message */ - size_t offset; /* data buffer offset */ - struct iucv_tty_msg *mbuf; /* buffer to store input/output data */ -}; - -/* IUCV callback handler */ -static int hvc_iucv_path_pending(struct iucv_path *, u8[8], u8[16]); -static void hvc_iucv_path_severed(struct iucv_path *, u8[16]); -static void hvc_iucv_msg_pending(struct iucv_path *, struct iucv_message *); -static void hvc_iucv_msg_complete(struct iucv_path *, struct iucv_message *); - - -/* Kernel module parameter: use one terminal device as default */ -static unsigned long hvc_iucv_devices = 1; - -/* Array of allocated hvc iucv tty lines... */ -static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES]; -#define IUCV_HVC_CON_IDX (0) -/* List of z/VM user ID filter entries (struct iucv_vmid_filter) */ -#define MAX_VMID_FILTER (500) -static size_t hvc_iucv_filter_size; -static void *hvc_iucv_filter; -static const char *hvc_iucv_filter_string; -static DEFINE_RWLOCK(hvc_iucv_filter_lock); - -/* Kmem cache and mempool for iucv_tty_buffer elements */ -static struct kmem_cache *hvc_iucv_buffer_cache; -static mempool_t *hvc_iucv_mempool; - -/* IUCV handler callback functions */ -static struct iucv_handler hvc_iucv_handler = { - .path_pending = hvc_iucv_path_pending, - .path_severed = hvc_iucv_path_severed, - .message_complete = hvc_iucv_msg_complete, - .message_pending = hvc_iucv_msg_pending, -}; - - -/** - * hvc_iucv_get_private() - Return a struct hvc_iucv_private instance. - * @num: The HVC virtual terminal number (vtermno) - * - * This function returns the struct hvc_iucv_private instance that corresponds - * to the HVC virtual terminal number specified as parameter @num. - */ -struct hvc_iucv_private *hvc_iucv_get_private(uint32_t num) -{ - if ((num < HVC_IUCV_MAGIC) || (num - HVC_IUCV_MAGIC > hvc_iucv_devices)) - return NULL; - return hvc_iucv_table[num - HVC_IUCV_MAGIC]; -} - -/** - * alloc_tty_buffer() - Return a new struct iucv_tty_buffer element. - * @size: Size of the internal buffer used to store data. - * @flags: Memory allocation flags passed to mempool. - * - * This function allocates a new struct iucv_tty_buffer element and, optionally, - * allocates an internal data buffer with the specified size @size. - * The internal data buffer is always allocated with GFP_DMA which is - * required for receiving and sending data with IUCV. - * Note: The total message size arises from the internal buffer size and the - * members of the iucv_tty_msg structure. - * The function returns NULL if memory allocation has failed. - */ -static struct iucv_tty_buffer *alloc_tty_buffer(size_t size, gfp_t flags) -{ - struct iucv_tty_buffer *bufp; - - bufp = mempool_alloc(hvc_iucv_mempool, flags); - if (!bufp) - return NULL; - memset(bufp, 0, sizeof(*bufp)); - - if (size > 0) { - bufp->msg.length = MSG_SIZE(size); - bufp->mbuf = kmalloc(bufp->msg.length, flags | GFP_DMA); - if (!bufp->mbuf) { - mempool_free(bufp, hvc_iucv_mempool); - return NULL; - } - bufp->mbuf->version = MSG_VERSION; - bufp->mbuf->type = MSG_TYPE_DATA; - bufp->mbuf->datalen = (u16) size; - } - return bufp; -} - -/** - * destroy_tty_buffer() - destroy struct iucv_tty_buffer element. - * @bufp: Pointer to a struct iucv_tty_buffer element, SHALL NOT be NULL. - */ -static void destroy_tty_buffer(struct iucv_tty_buffer *bufp) -{ - kfree(bufp->mbuf); - mempool_free(bufp, hvc_iucv_mempool); -} - -/** - * destroy_tty_buffer_list() - call destroy_tty_buffer() for each list element. - * @list: List containing struct iucv_tty_buffer elements. - */ -static void destroy_tty_buffer_list(struct list_head *list) -{ - struct iucv_tty_buffer *ent, *next; - - list_for_each_entry_safe(ent, next, list, list) { - list_del(&ent->list); - destroy_tty_buffer(ent); - } -} - -/** - * hvc_iucv_write() - Receive IUCV message & write data to HVC buffer. - * @priv: Pointer to struct hvc_iucv_private - * @buf: HVC buffer for writing received terminal data. - * @count: HVC buffer size. - * @has_more_data: Pointer to an int variable. - * - * The function picks up pending messages from the input queue and receives - * the message data that is then written to the specified buffer @buf. - * If the buffer size @count is less than the data message size, the - * message is kept on the input queue and @has_more_data is set to 1. - * If all message data has been written, the message is removed from - * the input queue. - * - * The function returns the number of bytes written to the terminal, zero if - * there are no pending data messages available or if there is no established - * IUCV path. - * If the IUCV path has been severed, then -EPIPE is returned to cause a - * hang up (that is issued by the HVC layer). - */ -static int hvc_iucv_write(struct hvc_iucv_private *priv, - char *buf, int count, int *has_more_data) -{ - struct iucv_tty_buffer *rb; - int written; - int rc; - - /* immediately return if there is no IUCV connection */ - if (priv->iucv_state == IUCV_DISCONN) - return 0; - - /* if the IUCV path has been severed, return -EPIPE to inform the - * HVC layer to hang up the tty device. */ - if (priv->iucv_state == IUCV_SEVERED) - return -EPIPE; - - /* check if there are pending messages */ - if (list_empty(&priv->tty_inqueue)) - return 0; - - /* receive an iucv message and flip data to the tty (ldisc) */ - rb = list_first_entry(&priv->tty_inqueue, struct iucv_tty_buffer, list); - - written = 0; - if (!rb->mbuf) { /* message not yet received ... */ - /* allocate mem to store msg data; if no memory is available - * then leave the buffer on the list and re-try later */ - rb->mbuf = kmalloc(rb->msg.length, GFP_ATOMIC | GFP_DMA); - if (!rb->mbuf) - return -ENOMEM; - - rc = __iucv_message_receive(priv->path, &rb->msg, 0, - rb->mbuf, rb->msg.length, NULL); - switch (rc) { - case 0: /* Successful */ - break; - case 2: /* No message found */ - case 9: /* Message purged */ - break; - default: - written = -EIO; - } - /* remove buffer if an error has occured or received data - * is not correct */ - if (rc || (rb->mbuf->version != MSG_VERSION) || - (rb->msg.length != MSG_SIZE(rb->mbuf->datalen))) - goto out_remove_buffer; - } - - switch (rb->mbuf->type) { - case MSG_TYPE_DATA: - written = min_t(int, rb->mbuf->datalen - rb->offset, count); - memcpy(buf, rb->mbuf->data + rb->offset, written); - if (written < (rb->mbuf->datalen - rb->offset)) { - rb->offset += written; - *has_more_data = 1; - goto out_written; - } - break; - - case MSG_TYPE_WINSIZE: - if (rb->mbuf->datalen != sizeof(struct winsize)) - break; - /* The caller must ensure that the hvc is locked, which - * is the case when called from hvc_iucv_get_chars() */ - __hvc_resize(priv->hvc, *((struct winsize *) rb->mbuf->data)); - break; - - case MSG_TYPE_ERROR: /* ignored ... */ - case MSG_TYPE_TERMENV: /* ignored ... */ - case MSG_TYPE_TERMIOS: /* ignored ... */ - break; - } - -out_remove_buffer: - list_del(&rb->list); - destroy_tty_buffer(rb); - *has_more_data = !list_empty(&priv->tty_inqueue); - -out_written: - return written; -} - -/** - * hvc_iucv_get_chars() - HVC get_chars operation. - * @vtermno: HVC virtual terminal number. - * @buf: Pointer to a buffer to store data - * @count: Size of buffer available for writing - * - * The HVC thread calls this method to read characters from the back-end. - * If an IUCV communication path has been established, pending IUCV messages - * are received and data is copied into buffer @buf up to @count bytes. - * - * Locking: The routine gets called under an irqsave() spinlock; and - * the routine locks the struct hvc_iucv_private->lock to call - * helper functions. - */ -static int hvc_iucv_get_chars(uint32_t vtermno, char *buf, int count) -{ - struct hvc_iucv_private *priv = hvc_iucv_get_private(vtermno); - int written; - int has_more_data; - - if (count <= 0) - return 0; - - if (!priv) - return -ENODEV; - - spin_lock(&priv->lock); - has_more_data = 0; - written = hvc_iucv_write(priv, buf, count, &has_more_data); - spin_unlock(&priv->lock); - - /* if there are still messages on the queue... schedule another run */ - if (has_more_data) - hvc_kick(); - - return written; -} - -/** - * hvc_iucv_queue() - Buffer terminal data for sending. - * @priv: Pointer to struct hvc_iucv_private instance. - * @buf: Buffer containing data to send. - * @count: Size of buffer and amount of data to send. - * - * The function queues data for sending. To actually send the buffered data, - * a work queue function is scheduled (with QUEUE_SNDBUF_DELAY). - * The function returns the number of data bytes that has been buffered. - * - * If the device is not connected, data is ignored and the function returns - * @count. - * If the buffer is full, the function returns 0. - * If an existing IUCV communicaton path has been severed, -EPIPE is returned - * (that can be passed to HVC layer to cause a tty hangup). - */ -static int hvc_iucv_queue(struct hvc_iucv_private *priv, const char *buf, - int count) -{ - size_t len; - - if (priv->iucv_state == IUCV_DISCONN) - return count; /* ignore data */ - - if (priv->iucv_state == IUCV_SEVERED) - return -EPIPE; - - len = min_t(size_t, count, SNDBUF_SIZE - priv->sndbuf_len); - if (!len) - return 0; - - memcpy(priv->sndbuf + priv->sndbuf_len, buf, len); - priv->sndbuf_len += len; - - if (priv->iucv_state == IUCV_CONNECTED) - schedule_delayed_work(&priv->sndbuf_work, QUEUE_SNDBUF_DELAY); - - return len; -} - -/** - * hvc_iucv_send() - Send an IUCV message containing terminal data. - * @priv: Pointer to struct hvc_iucv_private instance. - * - * If an IUCV communication path has been established, the buffered output data - * is sent via an IUCV message and the number of bytes sent is returned. - * Returns 0 if there is no established IUCV communication path or - * -EPIPE if an existing IUCV communicaton path has been severed. - */ -static int hvc_iucv_send(struct hvc_iucv_private *priv) -{ - struct iucv_tty_buffer *sb; - int rc, len; - - if (priv->iucv_state == IUCV_SEVERED) - return -EPIPE; - - if (priv->iucv_state == IUCV_DISCONN) - return -EIO; - - if (!priv->sndbuf_len) - return 0; - - /* allocate internal buffer to store msg data and also compute total - * message length */ - sb = alloc_tty_buffer(priv->sndbuf_len, GFP_ATOMIC); - if (!sb) - return -ENOMEM; - - memcpy(sb->mbuf->data, priv->sndbuf, priv->sndbuf_len); - sb->mbuf->datalen = (u16) priv->sndbuf_len; - sb->msg.length = MSG_SIZE(sb->mbuf->datalen); - - list_add_tail(&sb->list, &priv->tty_outqueue); - - rc = __iucv_message_send(priv->path, &sb->msg, 0, 0, - (void *) sb->mbuf, sb->msg.length); - if (rc) { - /* drop the message here; however we might want to handle - * 0x03 (msg limit reached) by trying again... */ - list_del(&sb->list); - destroy_tty_buffer(sb); - } - len = priv->sndbuf_len; - priv->sndbuf_len = 0; - - return len; -} - -/** - * hvc_iucv_sndbuf_work() - Send buffered data over IUCV - * @work: Work structure. - * - * This work queue function sends buffered output data over IUCV and, - * if not all buffered data could be sent, reschedules itself. - */ -static void hvc_iucv_sndbuf_work(struct work_struct *work) -{ - struct hvc_iucv_private *priv; - - priv = container_of(work, struct hvc_iucv_private, sndbuf_work.work); - if (!priv) - return; - - spin_lock_bh(&priv->lock); - hvc_iucv_send(priv); - spin_unlock_bh(&priv->lock); -} - -/** - * hvc_iucv_put_chars() - HVC put_chars operation. - * @vtermno: HVC virtual terminal number. - * @buf: Pointer to an buffer to read data from - * @count: Size of buffer available for reading - * - * The HVC thread calls this method to write characters to the back-end. - * The function calls hvc_iucv_queue() to queue terminal data for sending. - * - * Locking: The method gets called under an irqsave() spinlock; and - * locks struct hvc_iucv_private->lock. - */ -static int hvc_iucv_put_chars(uint32_t vtermno, const char *buf, int count) -{ - struct hvc_iucv_private *priv = hvc_iucv_get_private(vtermno); - int queued; - - if (count <= 0) - return 0; - - if (!priv) - return -ENODEV; - - spin_lock(&priv->lock); - queued = hvc_iucv_queue(priv, buf, count); - spin_unlock(&priv->lock); - - return queued; -} - -/** - * hvc_iucv_notifier_add() - HVC notifier for opening a TTY for the first time. - * @hp: Pointer to the HVC device (struct hvc_struct) - * @id: Additional data (originally passed to hvc_alloc): the index of an struct - * hvc_iucv_private instance. - * - * The function sets the tty state to TTY_OPENED for the struct hvc_iucv_private - * instance that is derived from @id. Always returns 0. - * - * Locking: struct hvc_iucv_private->lock, spin_lock_bh - */ -static int hvc_iucv_notifier_add(struct hvc_struct *hp, int id) -{ - struct hvc_iucv_private *priv; - - priv = hvc_iucv_get_private(id); - if (!priv) - return 0; - - spin_lock_bh(&priv->lock); - priv->tty_state = TTY_OPENED; - spin_unlock_bh(&priv->lock); - - return 0; -} - -/** - * hvc_iucv_cleanup() - Clean up and reset a z/VM IUCV HVC instance. - * @priv: Pointer to the struct hvc_iucv_private instance. - */ -static void hvc_iucv_cleanup(struct hvc_iucv_private *priv) -{ - destroy_tty_buffer_list(&priv->tty_outqueue); - destroy_tty_buffer_list(&priv->tty_inqueue); - - priv->tty_state = TTY_CLOSED; - priv->iucv_state = IUCV_DISCONN; - - priv->sndbuf_len = 0; -} - -/** - * tty_outqueue_empty() - Test if the tty outq is empty - * @priv: Pointer to struct hvc_iucv_private instance. - */ -static inline int tty_outqueue_empty(struct hvc_iucv_private *priv) -{ - int rc; - - spin_lock_bh(&priv->lock); - rc = list_empty(&priv->tty_outqueue); - spin_unlock_bh(&priv->lock); - - return rc; -} - -/** - * flush_sndbuf_sync() - Flush send buffer and wait for completion - * @priv: Pointer to struct hvc_iucv_private instance. - * - * The routine cancels a pending sndbuf work, calls hvc_iucv_send() - * to flush any buffered terminal output data and waits for completion. - */ -static void flush_sndbuf_sync(struct hvc_iucv_private *priv) -{ - int sync_wait; - - cancel_delayed_work_sync(&priv->sndbuf_work); - - spin_lock_bh(&priv->lock); - hvc_iucv_send(priv); /* force sending buffered data */ - sync_wait = !list_empty(&priv->tty_outqueue); /* anything queued ? */ - spin_unlock_bh(&priv->lock); - - if (sync_wait) - wait_event_timeout(priv->sndbuf_waitq, - tty_outqueue_empty(priv), HZ/10); -} - -/** - * hvc_iucv_hangup() - Sever IUCV path and schedule hvc tty hang up - * @priv: Pointer to hvc_iucv_private structure - * - * This routine severs an existing IUCV communication path and hangs - * up the underlying HVC terminal device. - * The hang-up occurs only if an IUCV communication path is established; - * otherwise there is no need to hang up the terminal device. - * - * The IUCV HVC hang-up is separated into two steps: - * 1. After the IUCV path has been severed, the iucv_state is set to - * IUCV_SEVERED. - * 2. Later, when the HVC thread calls hvc_iucv_get_chars(), the - * IUCV_SEVERED state causes the tty hang-up in the HVC layer. - * - * If the tty has not yet been opened, clean up the hvc_iucv_private - * structure to allow re-connects. - * If the tty has been opened, let get_chars() return -EPIPE to signal - * the HVC layer to hang up the tty and, if so, wake up the HVC thread - * to call get_chars()... - * - * Special notes on hanging up a HVC terminal instantiated as console: - * Hang-up: 1. do_tty_hangup() replaces file ops (= hung_up_tty_fops) - * 2. do_tty_hangup() calls tty->ops->close() for console_filp - * => no hangup notifier is called by HVC (default) - * 2. hvc_close() returns because of tty_hung_up_p(filp) - * => no delete notifier is called! - * Finally, the back-end is not being notified, thus, the tty session is - * kept active (TTY_OPEN) to be ready for re-connects. - * - * Locking: spin_lock(&priv->lock) w/o disabling bh - */ -static void hvc_iucv_hangup(struct hvc_iucv_private *priv) -{ - struct iucv_path *path; - - path = NULL; - spin_lock(&priv->lock); - if (priv->iucv_state == IUCV_CONNECTED) { - path = priv->path; - priv->path = NULL; - priv->iucv_state = IUCV_SEVERED; - if (priv->tty_state == TTY_CLOSED) - hvc_iucv_cleanup(priv); - else - /* console is special (see above) */ - if (priv->is_console) { - hvc_iucv_cleanup(priv); - priv->tty_state = TTY_OPENED; - } else - hvc_kick(); - } - spin_unlock(&priv->lock); - - /* finally sever path (outside of priv->lock due to lock ordering) */ - if (path) { - iucv_path_sever(path, NULL); - iucv_path_free(path); - } -} - -/** - * hvc_iucv_notifier_hangup() - HVC notifier for TTY hangups. - * @hp: Pointer to the HVC device (struct hvc_struct) - * @id: Additional data (originally passed to hvc_alloc): - * the index of an struct hvc_iucv_private instance. - * - * This routine notifies the HVC back-end that a tty hangup (carrier loss, - * virtual or otherwise) has occured. - * The z/VM IUCV HVC device driver ignores virtual hangups (vhangup()) - * to keep an existing IUCV communication path established. - * (Background: vhangup() is called from user space (by getty or login) to - * disable writing to the tty by other applications). - * If the tty has been opened and an established IUCV path has been severed - * (we caused the tty hangup), the function calls hvc_iucv_cleanup(). - * - * Locking: struct hvc_iucv_private->lock - */ -static void hvc_iucv_notifier_hangup(struct hvc_struct *hp, int id) -{ - struct hvc_iucv_private *priv; - - priv = hvc_iucv_get_private(id); - if (!priv) - return; - - flush_sndbuf_sync(priv); - - spin_lock_bh(&priv->lock); - /* NOTE: If the hangup was scheduled by ourself (from the iucv - * path_servered callback [IUCV_SEVERED]), we have to clean up - * our structure and to set state to TTY_CLOSED. - * If the tty was hung up otherwise (e.g. vhangup()), then we - * ignore this hangup and keep an established IUCV path open... - * (...the reason is that we are not able to connect back to the - * client if we disconnect on hang up) */ - priv->tty_state = TTY_CLOSED; - - if (priv->iucv_state == IUCV_SEVERED) - hvc_iucv_cleanup(priv); - spin_unlock_bh(&priv->lock); -} - -/** - * hvc_iucv_notifier_del() - HVC notifier for closing a TTY for the last time. - * @hp: Pointer to the HVC device (struct hvc_struct) - * @id: Additional data (originally passed to hvc_alloc): - * the index of an struct hvc_iucv_private instance. - * - * This routine notifies the HVC back-end that the last tty device fd has been - * closed. The function calls hvc_iucv_cleanup() to clean up the struct - * hvc_iucv_private instance. - * - * Locking: struct hvc_iucv_private->lock - */ -static void hvc_iucv_notifier_del(struct hvc_struct *hp, int id) -{ - struct hvc_iucv_private *priv; - struct iucv_path *path; - - priv = hvc_iucv_get_private(id); - if (!priv) - return; - - flush_sndbuf_sync(priv); - - spin_lock_bh(&priv->lock); - path = priv->path; /* save reference to IUCV path */ - priv->path = NULL; - hvc_iucv_cleanup(priv); - spin_unlock_bh(&priv->lock); - - /* sever IUCV path outside of priv->lock due to lock ordering of: - * priv->lock <--> iucv_table_lock */ - if (path) { - iucv_path_sever(path, NULL); - iucv_path_free(path); - } -} - -/** - * hvc_iucv_filter_connreq() - Filter connection request based on z/VM user ID - * @ipvmid: Originating z/VM user ID (right padded with blanks) - * - * Returns 0 if the z/VM user ID @ipvmid is allowed to connection, otherwise - * non-zero. - */ -static int hvc_iucv_filter_connreq(u8 ipvmid[8]) -{ - size_t i; - - /* Note: default policy is ACCEPT if no filter is set */ - if (!hvc_iucv_filter_size) - return 0; - - for (i = 0; i < hvc_iucv_filter_size; i++) - if (0 == memcmp(ipvmid, hvc_iucv_filter + (8 * i), 8)) - return 0; - return 1; -} - -/** - * hvc_iucv_path_pending() - IUCV handler to process a connection request. - * @path: Pending path (struct iucv_path) - * @ipvmid: z/VM system identifier of originator - * @ipuser: User specified data for this path - * (AF_IUCV: port/service name and originator port) - * - * The function uses the @ipuser data to determine if the pending path belongs - * to a terminal managed by this device driver. - * If the path belongs to this driver, ensure that the terminal is not accessed - * multiple times (only one connection to a terminal is allowed). - * If the terminal is not yet connected, the pending path is accepted and is - * associated to the appropriate struct hvc_iucv_private instance. - * - * Returns 0 if @path belongs to a terminal managed by the this device driver; - * otherwise returns -ENODEV in order to dispatch this path to other handlers. - * - * Locking: struct hvc_iucv_private->lock - */ -static int hvc_iucv_path_pending(struct iucv_path *path, - u8 ipvmid[8], u8 ipuser[16]) -{ - struct hvc_iucv_private *priv; - u8 nuser_data[16]; - u8 vm_user_id[9]; - int i, rc; - - priv = NULL; - for (i = 0; i < hvc_iucv_devices; i++) - if (hvc_iucv_table[i] && - (0 == memcmp(hvc_iucv_table[i]->srv_name, ipuser, 8))) { - priv = hvc_iucv_table[i]; - break; - } - if (!priv) - return -ENODEV; - - /* Enforce that ipvmid is allowed to connect to us */ - read_lock(&hvc_iucv_filter_lock); - rc = hvc_iucv_filter_connreq(ipvmid); - read_unlock(&hvc_iucv_filter_lock); - if (rc) { - iucv_path_sever(path, ipuser); - iucv_path_free(path); - memcpy(vm_user_id, ipvmid, 8); - vm_user_id[8] = 0; - pr_info("A connection request from z/VM user ID %s " - "was refused\n", vm_user_id); - return 0; - } - - spin_lock(&priv->lock); - - /* If the terminal is already connected or being severed, then sever - * this path to enforce that there is only ONE established communication - * path per terminal. */ - if (priv->iucv_state != IUCV_DISCONN) { - iucv_path_sever(path, ipuser); - iucv_path_free(path); - goto out_path_handled; - } - - /* accept path */ - memcpy(nuser_data, ipuser + 8, 8); /* remote service (for af_iucv) */ - memcpy(nuser_data + 8, ipuser, 8); /* local service (for af_iucv) */ - path->msglim = 0xffff; /* IUCV MSGLIMIT */ - path->flags &= ~IUCV_IPRMDATA; /* TODO: use IUCV_IPRMDATA */ - rc = iucv_path_accept(path, &hvc_iucv_handler, nuser_data, priv); - if (rc) { - iucv_path_sever(path, ipuser); - iucv_path_free(path); - goto out_path_handled; - } - priv->path = path; - priv->iucv_state = IUCV_CONNECTED; - - /* flush buffered output data... */ - schedule_delayed_work(&priv->sndbuf_work, 5); - -out_path_handled: - spin_unlock(&priv->lock); - return 0; -} - -/** - * hvc_iucv_path_severed() - IUCV handler to process a path sever. - * @path: Pending path (struct iucv_path) - * @ipuser: User specified data for this path - * (AF_IUCV: port/service name and originator port) - * - * This function calls the hvc_iucv_hangup() function for the - * respective IUCV HVC terminal. - * - * Locking: struct hvc_iucv_private->lock - */ -static void hvc_iucv_path_severed(struct iucv_path *path, u8 ipuser[16]) -{ - struct hvc_iucv_private *priv = path->private; - - hvc_iucv_hangup(priv); -} - -/** - * hvc_iucv_msg_pending() - IUCV handler to process an incoming IUCV message. - * @path: Pending path (struct iucv_path) - * @msg: Pointer to the IUCV message - * - * The function puts an incoming message on the input queue for later - * processing (by hvc_iucv_get_chars() / hvc_iucv_write()). - * If the tty has not yet been opened, the message is rejected. - * - * Locking: struct hvc_iucv_private->lock - */ -static void hvc_iucv_msg_pending(struct iucv_path *path, - struct iucv_message *msg) -{ - struct hvc_iucv_private *priv = path->private; - struct iucv_tty_buffer *rb; - - /* reject messages that exceed max size of iucv_tty_msg->datalen */ - if (msg->length > MSG_SIZE(MSG_MAX_DATALEN)) { - iucv_message_reject(path, msg); - return; - } - - spin_lock(&priv->lock); - - /* reject messages if tty has not yet been opened */ - if (priv->tty_state == TTY_CLOSED) { - iucv_message_reject(path, msg); - goto unlock_return; - } - - /* allocate tty buffer to save iucv msg only */ - rb = alloc_tty_buffer(0, GFP_ATOMIC); - if (!rb) { - iucv_message_reject(path, msg); - goto unlock_return; /* -ENOMEM */ - } - rb->msg = *msg; - - list_add_tail(&rb->list, &priv->tty_inqueue); - - hvc_kick(); /* wake up hvc thread */ - -unlock_return: - spin_unlock(&priv->lock); -} - -/** - * hvc_iucv_msg_complete() - IUCV handler to process message completion - * @path: Pending path (struct iucv_path) - * @msg: Pointer to the IUCV message - * - * The function is called upon completion of message delivery to remove the - * message from the outqueue. Additional delivery information can be found - * msg->audit: rejected messages (0x040000 (IPADRJCT)), and - * purged messages (0x010000 (IPADPGNR)). - * - * Locking: struct hvc_iucv_private->lock - */ -static void hvc_iucv_msg_complete(struct iucv_path *path, - struct iucv_message *msg) -{ - struct hvc_iucv_private *priv = path->private; - struct iucv_tty_buffer *ent, *next; - LIST_HEAD(list_remove); - - spin_lock(&priv->lock); - list_for_each_entry_safe(ent, next, &priv->tty_outqueue, list) - if (ent->msg.id == msg->id) { - list_move(&ent->list, &list_remove); - break; - } - wake_up(&priv->sndbuf_waitq); - spin_unlock(&priv->lock); - destroy_tty_buffer_list(&list_remove); -} - -/** - * hvc_iucv_pm_freeze() - Freeze PM callback - * @dev: IUVC HVC terminal device - * - * Sever an established IUCV communication path and - * trigger a hang-up of the underlying HVC terminal. - */ -static int hvc_iucv_pm_freeze(struct device *dev) -{ - struct hvc_iucv_private *priv = dev_get_drvdata(dev); - - local_bh_disable(); - hvc_iucv_hangup(priv); - local_bh_enable(); - - return 0; -} - -/** - * hvc_iucv_pm_restore_thaw() - Thaw and restore PM callback - * @dev: IUVC HVC terminal device - * - * Wake up the HVC thread to trigger hang-up and respective - * HVC back-end notifier invocations. - */ -static int hvc_iucv_pm_restore_thaw(struct device *dev) -{ - hvc_kick(); - return 0; -} - - -/* HVC operations */ -static const struct hv_ops hvc_iucv_ops = { - .get_chars = hvc_iucv_get_chars, - .put_chars = hvc_iucv_put_chars, - .notifier_add = hvc_iucv_notifier_add, - .notifier_del = hvc_iucv_notifier_del, - .notifier_hangup = hvc_iucv_notifier_hangup, -}; - -/* Suspend / resume device operations */ -static const struct dev_pm_ops hvc_iucv_pm_ops = { - .freeze = hvc_iucv_pm_freeze, - .thaw = hvc_iucv_pm_restore_thaw, - .restore = hvc_iucv_pm_restore_thaw, -}; - -/* IUCV HVC device driver */ -static struct device_driver hvc_iucv_driver = { - .name = KMSG_COMPONENT, - .bus = &iucv_bus, - .pm = &hvc_iucv_pm_ops, -}; - -/** - * hvc_iucv_alloc() - Allocates a new struct hvc_iucv_private instance - * @id: hvc_iucv_table index - * @is_console: Flag if the instance is used as Linux console - * - * This function allocates a new hvc_iucv_private structure and stores - * the instance in hvc_iucv_table at index @id. - * Returns 0 on success; otherwise non-zero. - */ -static int __init hvc_iucv_alloc(int id, unsigned int is_console) -{ - struct hvc_iucv_private *priv; - char name[9]; - int rc; - - priv = kzalloc(sizeof(struct hvc_iucv_private), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - spin_lock_init(&priv->lock); - INIT_LIST_HEAD(&priv->tty_outqueue); - INIT_LIST_HEAD(&priv->tty_inqueue); - INIT_DELAYED_WORK(&priv->sndbuf_work, hvc_iucv_sndbuf_work); - init_waitqueue_head(&priv->sndbuf_waitq); - - priv->sndbuf = (void *) get_zeroed_page(GFP_KERNEL); - if (!priv->sndbuf) { - kfree(priv); - return -ENOMEM; - } - - /* set console flag */ - priv->is_console = is_console; - - /* allocate hvc device */ - priv->hvc = hvc_alloc(HVC_IUCV_MAGIC + id, /* PAGE_SIZE */ - HVC_IUCV_MAGIC + id, &hvc_iucv_ops, 256); - if (IS_ERR(priv->hvc)) { - rc = PTR_ERR(priv->hvc); - goto out_error_hvc; - } - - /* notify HVC thread instead of using polling */ - priv->hvc->irq_requested = 1; - - /* setup iucv related information */ - snprintf(name, 9, "lnxhvc%-2d", id); - memcpy(priv->srv_name, name, 8); - ASCEBC(priv->srv_name, 8); - - /* create and setup device */ - priv->dev = kzalloc(sizeof(*priv->dev), GFP_KERNEL); - if (!priv->dev) { - rc = -ENOMEM; - goto out_error_dev; - } - dev_set_name(priv->dev, "hvc_iucv%d", id); - dev_set_drvdata(priv->dev, priv); - priv->dev->bus = &iucv_bus; - priv->dev->parent = iucv_root; - priv->dev->driver = &hvc_iucv_driver; - priv->dev->release = (void (*)(struct device *)) kfree; - rc = device_register(priv->dev); - if (rc) { - put_device(priv->dev); - goto out_error_dev; - } - - hvc_iucv_table[id] = priv; - return 0; - -out_error_dev: - hvc_remove(priv->hvc); -out_error_hvc: - free_page((unsigned long) priv->sndbuf); - kfree(priv); - - return rc; -} - -/** - * hvc_iucv_destroy() - Destroy and free hvc_iucv_private instances - */ -static void __init hvc_iucv_destroy(struct hvc_iucv_private *priv) -{ - hvc_remove(priv->hvc); - device_unregister(priv->dev); - free_page((unsigned long) priv->sndbuf); - kfree(priv); -} - -/** - * hvc_iucv_parse_filter() - Parse filter for a single z/VM user ID - * @filter: String containing a comma-separated list of z/VM user IDs - */ -static const char *hvc_iucv_parse_filter(const char *filter, char *dest) -{ - const char *nextdelim, *residual; - size_t len; - - nextdelim = strchr(filter, ','); - if (nextdelim) { - len = nextdelim - filter; - residual = nextdelim + 1; - } else { - len = strlen(filter); - residual = filter + len; - } - - if (len == 0) - return ERR_PTR(-EINVAL); - - /* check for '\n' (if called from sysfs) */ - if (filter[len - 1] == '\n') - len--; - - if (len > 8) - return ERR_PTR(-EINVAL); - - /* pad with blanks and save upper case version of user ID */ - memset(dest, ' ', 8); - while (len--) - dest[len] = toupper(filter[len]); - return residual; -} - -/** - * hvc_iucv_setup_filter() - Set up z/VM user ID filter - * @filter: String consisting of a comma-separated list of z/VM user IDs - * - * The function parses the @filter string and creates an array containing - * the list of z/VM user ID filter entries. - * Return code 0 means success, -EINVAL if the filter is syntactically - * incorrect, -ENOMEM if there was not enough memory to allocate the - * filter list array, or -ENOSPC if too many z/VM user IDs have been specified. - */ -static int hvc_iucv_setup_filter(const char *val) -{ - const char *residual; - int err; - size_t size, count; - void *array, *old_filter; - - count = strlen(val); - if (count == 0 || (count == 1 && val[0] == '\n')) { - size = 0; - array = NULL; - goto out_replace_filter; /* clear filter */ - } - - /* count user IDs in order to allocate sufficient memory */ - size = 1; - residual = val; - while ((residual = strchr(residual, ',')) != NULL) { - residual++; - size++; - } - - /* check if the specified list exceeds the filter limit */ - if (size > MAX_VMID_FILTER) - return -ENOSPC; - - array = kzalloc(size * 8, GFP_KERNEL); - if (!array) - return -ENOMEM; - - count = size; - residual = val; - while (*residual && count) { - residual = hvc_iucv_parse_filter(residual, - array + ((size - count) * 8)); - if (IS_ERR(residual)) { - err = PTR_ERR(residual); - kfree(array); - goto out_err; - } - count--; - } - -out_replace_filter: - write_lock_bh(&hvc_iucv_filter_lock); - old_filter = hvc_iucv_filter; - hvc_iucv_filter_size = size; - hvc_iucv_filter = array; - write_unlock_bh(&hvc_iucv_filter_lock); - kfree(old_filter); - - err = 0; -out_err: - return err; -} - -/** - * param_set_vmidfilter() - Set z/VM user ID filter parameter - * @val: String consisting of a comma-separated list of z/VM user IDs - * @kp: Kernel parameter pointing to hvc_iucv_filter array - * - * The function sets up the z/VM user ID filter specified as comma-separated - * list of user IDs in @val. - * Note: If it is called early in the boot process, @val is stored and - * parsed later in hvc_iucv_init(). - */ -static int param_set_vmidfilter(const char *val, const struct kernel_param *kp) -{ - int rc; - - if (!MACHINE_IS_VM || !hvc_iucv_devices) - return -ENODEV; - - if (!val) - return -EINVAL; - - rc = 0; - if (slab_is_available()) - rc = hvc_iucv_setup_filter(val); - else - hvc_iucv_filter_string = val; /* defer... */ - return rc; -} - -/** - * param_get_vmidfilter() - Get z/VM user ID filter - * @buffer: Buffer to store z/VM user ID filter, - * (buffer size assumption PAGE_SIZE) - * @kp: Kernel parameter pointing to the hvc_iucv_filter array - * - * The function stores the filter as a comma-separated list of z/VM user IDs - * in @buffer. Typically, sysfs routines call this function for attr show. - */ -static int param_get_vmidfilter(char *buffer, const struct kernel_param *kp) -{ - int rc; - size_t index, len; - void *start, *end; - - if (!MACHINE_IS_VM || !hvc_iucv_devices) - return -ENODEV; - - rc = 0; - read_lock_bh(&hvc_iucv_filter_lock); - for (index = 0; index < hvc_iucv_filter_size; index++) { - start = hvc_iucv_filter + (8 * index); - end = memchr(start, ' ', 8); - len = (end) ? end - start : 8; - memcpy(buffer + rc, start, len); - rc += len; - buffer[rc++] = ','; - } - read_unlock_bh(&hvc_iucv_filter_lock); - if (rc) - buffer[--rc] = '\0'; /* replace last comma and update rc */ - return rc; -} - -#define param_check_vmidfilter(name, p) __param_check(name, p, void) - -static struct kernel_param_ops param_ops_vmidfilter = { - .set = param_set_vmidfilter, - .get = param_get_vmidfilter, -}; - -/** - * hvc_iucv_init() - z/VM IUCV HVC device driver initialization - */ -static int __init hvc_iucv_init(void) -{ - int rc; - unsigned int i; - - if (!hvc_iucv_devices) - return -ENODEV; - - if (!MACHINE_IS_VM) { - pr_notice("The z/VM IUCV HVC device driver cannot " - "be used without z/VM\n"); - rc = -ENODEV; - goto out_error; - } - - if (hvc_iucv_devices > MAX_HVC_IUCV_LINES) { - pr_err("%lu is not a valid value for the hvc_iucv= " - "kernel parameter\n", hvc_iucv_devices); - rc = -EINVAL; - goto out_error; - } - - /* register IUCV HVC device driver */ - rc = driver_register(&hvc_iucv_driver); - if (rc) - goto out_error; - - /* parse hvc_iucv_allow string and create z/VM user ID filter list */ - if (hvc_iucv_filter_string) { - rc = hvc_iucv_setup_filter(hvc_iucv_filter_string); - switch (rc) { - case 0: - break; - case -ENOMEM: - pr_err("Allocating memory failed with " - "reason code=%d\n", 3); - goto out_error; - case -EINVAL: - pr_err("hvc_iucv_allow= does not specify a valid " - "z/VM user ID list\n"); - goto out_error; - case -ENOSPC: - pr_err("hvc_iucv_allow= specifies too many " - "z/VM user IDs\n"); - goto out_error; - default: - goto out_error; - } - } - - hvc_iucv_buffer_cache = kmem_cache_create(KMSG_COMPONENT, - sizeof(struct iucv_tty_buffer), - 0, 0, NULL); - if (!hvc_iucv_buffer_cache) { - pr_err("Allocating memory failed with reason code=%d\n", 1); - rc = -ENOMEM; - goto out_error; - } - - hvc_iucv_mempool = mempool_create_slab_pool(MEMPOOL_MIN_NR, - hvc_iucv_buffer_cache); - if (!hvc_iucv_mempool) { - pr_err("Allocating memory failed with reason code=%d\n", 2); - kmem_cache_destroy(hvc_iucv_buffer_cache); - rc = -ENOMEM; - goto out_error; - } - - /* register the first terminal device as console - * (must be done before allocating hvc terminal devices) */ - rc = hvc_instantiate(HVC_IUCV_MAGIC, IUCV_HVC_CON_IDX, &hvc_iucv_ops); - if (rc) { - pr_err("Registering HVC terminal device as " - "Linux console failed\n"); - goto out_error_memory; - } - - /* allocate hvc_iucv_private structs */ - for (i = 0; i < hvc_iucv_devices; i++) { - rc = hvc_iucv_alloc(i, (i == IUCV_HVC_CON_IDX) ? 1 : 0); - if (rc) { - pr_err("Creating a new HVC terminal device " - "failed with error code=%d\n", rc); - goto out_error_hvc; - } - } - - /* register IUCV callback handler */ - rc = iucv_register(&hvc_iucv_handler, 0); - if (rc) { - pr_err("Registering IUCV handlers failed with error code=%d\n", - rc); - goto out_error_hvc; - } - - return 0; - -out_error_hvc: - for (i = 0; i < hvc_iucv_devices; i++) - if (hvc_iucv_table[i]) - hvc_iucv_destroy(hvc_iucv_table[i]); -out_error_memory: - mempool_destroy(hvc_iucv_mempool); - kmem_cache_destroy(hvc_iucv_buffer_cache); -out_error: - if (hvc_iucv_filter) - kfree(hvc_iucv_filter); - hvc_iucv_devices = 0; /* ensure that we do not provide any device */ - return rc; -} - -/** - * hvc_iucv_config() - Parsing of hvc_iucv= kernel command line parameter - * @val: Parameter value (numeric) - */ -static int __init hvc_iucv_config(char *val) -{ - return strict_strtoul(val, 10, &hvc_iucv_devices); -} - - -device_initcall(hvc_iucv_init); -__setup("hvc_iucv=", hvc_iucv_config); -core_param(hvc_iucv_allow, hvc_iucv_filter, vmidfilter, 0640); diff --git a/drivers/char/hvc_rtas.c b/drivers/char/hvc_rtas.c deleted file mode 100644 index 61c4a61558d9..000000000000 --- a/drivers/char/hvc_rtas.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * IBM RTAS driver interface to hvc_console.c - * - * (C) Copyright IBM Corporation 2001-2005 - * (C) Copyright Red Hat, Inc. 2005 - * - * Author(s): Maximino Augilar - * : Ryan S. Arnold - * : Utz Bacher - * : David Woodhouse - * - * inspired by drivers/char/hvc_console.c - * written by Anton Blanchard and Paul Mackerras - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include "hvc_console.h" - -#define hvc_rtas_cookie 0x67781e15 -struct hvc_struct *hvc_rtas_dev; - -static int rtascons_put_char_token = RTAS_UNKNOWN_SERVICE; -static int rtascons_get_char_token = RTAS_UNKNOWN_SERVICE; - -static inline int hvc_rtas_write_console(uint32_t vtermno, const char *buf, - int count) -{ - int i; - - for (i = 0; i < count; i++) { - if (rtas_call(rtascons_put_char_token, 1, 1, NULL, buf[i])) - break; - } - - return i; -} - -static int hvc_rtas_read_console(uint32_t vtermno, char *buf, int count) -{ - int i, c; - - for (i = 0; i < count; i++) { - if (rtas_call(rtascons_get_char_token, 0, 2, &c)) - break; - - buf[i] = c; - } - - return i; -} - -static const struct hv_ops hvc_rtas_get_put_ops = { - .get_chars = hvc_rtas_read_console, - .put_chars = hvc_rtas_write_console, -}; - -static int __init hvc_rtas_init(void) -{ - struct hvc_struct *hp; - - if (rtascons_put_char_token == RTAS_UNKNOWN_SERVICE) - rtascons_put_char_token = rtas_token("put-term-char"); - if (rtascons_put_char_token == RTAS_UNKNOWN_SERVICE) - return -EIO; - - if (rtascons_get_char_token == RTAS_UNKNOWN_SERVICE) - rtascons_get_char_token = rtas_token("get-term-char"); - if (rtascons_get_char_token == RTAS_UNKNOWN_SERVICE) - return -EIO; - - BUG_ON(hvc_rtas_dev); - - /* Allocate an hvc_struct for the console device we instantiated - * earlier. Save off hp so that we can return it on exit */ - hp = hvc_alloc(hvc_rtas_cookie, NO_IRQ, &hvc_rtas_get_put_ops, 16); - if (IS_ERR(hp)) - return PTR_ERR(hp); - - hvc_rtas_dev = hp; - - return 0; -} -module_init(hvc_rtas_init); - -/* This will tear down the tty portion of the driver */ -static void __exit hvc_rtas_exit(void) -{ - /* Really the fun isn't over until the worker thread breaks down and - * the tty cleans up */ - if (hvc_rtas_dev) - hvc_remove(hvc_rtas_dev); -} -module_exit(hvc_rtas_exit); - -/* This will happen prior to module init. There is no tty at this time? */ -static int __init hvc_rtas_console_init(void) -{ - rtascons_put_char_token = rtas_token("put-term-char"); - if (rtascons_put_char_token == RTAS_UNKNOWN_SERVICE) - return -EIO; - - rtascons_get_char_token = rtas_token("get-term-char"); - if (rtascons_get_char_token == RTAS_UNKNOWN_SERVICE) - return -EIO; - - hvc_instantiate(hvc_rtas_cookie, 0, &hvc_rtas_get_put_ops); - add_preferred_console("hvc", 0, NULL); - - return 0; -} -console_initcall(hvc_rtas_console_init); diff --git a/drivers/char/hvc_tile.c b/drivers/char/hvc_tile.c deleted file mode 100644 index 7a84a0595477..000000000000 --- a/drivers/char/hvc_tile.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * Tilera TILE Processor hypervisor console - */ - -#include -#include -#include -#include -#include -#include - -#include - -#include "hvc_console.h" - -static int hvc_tile_put_chars(uint32_t vt, const char *buf, int count) -{ - return hv_console_write((HV_VirtAddr)buf, count); -} - -static int hvc_tile_get_chars(uint32_t vt, char *buf, int count) -{ - int i, c; - - for (i = 0; i < count; ++i) { - c = hv_console_read_if_ready(); - if (c < 0) - break; - buf[i] = c; - } - - return i; -} - -static const struct hv_ops hvc_tile_get_put_ops = { - .get_chars = hvc_tile_get_chars, - .put_chars = hvc_tile_put_chars, -}; - -static int __init hvc_tile_console_init(void) -{ - extern void disable_early_printk(void); - hvc_instantiate(0, 0, &hvc_tile_get_put_ops); - add_preferred_console("hvc", 0, NULL); - disable_early_printk(); - return 0; -} -console_initcall(hvc_tile_console_init); - -static int __init hvc_tile_init(void) -{ - struct hvc_struct *s; - s = hvc_alloc(0, 0, &hvc_tile_get_put_ops, 128); - return IS_ERR(s) ? PTR_ERR(s) : 0; -} -device_initcall(hvc_tile_init); diff --git a/drivers/char/hvc_udbg.c b/drivers/char/hvc_udbg.c deleted file mode 100644 index b0957e61a7be..000000000000 --- a/drivers/char/hvc_udbg.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - * udbg interface to hvc_console.c - * - * (C) Copyright David Gibson, IBM Corporation 2008. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "hvc_console.h" - -struct hvc_struct *hvc_udbg_dev; - -static int hvc_udbg_put(uint32_t vtermno, const char *buf, int count) -{ - int i; - - for (i = 0; i < count; i++) - udbg_putc(buf[i]); - - return i; -} - -static int hvc_udbg_get(uint32_t vtermno, char *buf, int count) -{ - int i, c; - - if (!udbg_getc_poll) - return 0; - - for (i = 0; i < count; i++) { - if ((c = udbg_getc_poll()) == -1) - break; - buf[i] = c; - } - - return i; -} - -static const struct hv_ops hvc_udbg_ops = { - .get_chars = hvc_udbg_get, - .put_chars = hvc_udbg_put, -}; - -static int __init hvc_udbg_init(void) -{ - struct hvc_struct *hp; - - BUG_ON(hvc_udbg_dev); - - hp = hvc_alloc(0, NO_IRQ, &hvc_udbg_ops, 16); - if (IS_ERR(hp)) - return PTR_ERR(hp); - - hvc_udbg_dev = hp; - - return 0; -} -module_init(hvc_udbg_init); - -static void __exit hvc_udbg_exit(void) -{ - if (hvc_udbg_dev) - hvc_remove(hvc_udbg_dev); -} -module_exit(hvc_udbg_exit); - -static int __init hvc_udbg_console_init(void) -{ - hvc_instantiate(0, 0, &hvc_udbg_ops); - add_preferred_console("hvc", 0, NULL); - - return 0; -} -console_initcall(hvc_udbg_console_init); diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c deleted file mode 100644 index 5e2f52b33327..000000000000 --- a/drivers/char/hvc_vio.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * vio driver interface to hvc_console.c - * - * This code was moved here to allow the remaing code to be reused as a - * generic polling mode with semi-reliable transport driver core to the - * console and tty subsystems. - * - * - * Copyright (C) 2001 Anton Blanchard , IBM - * Copyright (C) 2001 Paul Mackerras , IBM - * Copyright (C) 2004 Benjamin Herrenschmidt , IBM Corp. - * Copyright (C) 2004 IBM Corporation - * - * Additional Author(s): - * Ryan S. Arnold - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include - -#include -#include -#include -#include - -#include "hvc_console.h" - -static const char hvc_driver_name[] = "hvc_console"; - -static struct vio_device_id hvc_driver_table[] __devinitdata = { - {"serial", "hvterm1"}, - { "", "" } -}; -MODULE_DEVICE_TABLE(vio, hvc_driver_table); - -static int filtered_get_chars(uint32_t vtermno, char *buf, int count) -{ - unsigned long got; - int i; - - /* - * Vio firmware will read up to SIZE_VIO_GET_CHARS at its own discretion - * so we play safe and avoid the situation where got > count which could - * overload the flip buffer. - */ - if (count < SIZE_VIO_GET_CHARS) - return -EAGAIN; - - got = hvc_get_chars(vtermno, buf, count); - - /* - * Work around a HV bug where it gives us a null - * after every \r. -- paulus - */ - for (i = 1; i < got; ++i) { - if (buf[i] == 0 && buf[i-1] == '\r') { - --got; - if (i < got) - memmove(&buf[i], &buf[i+1], - got - i); - } - } - return got; -} - -static const struct hv_ops hvc_get_put_ops = { - .get_chars = filtered_get_chars, - .put_chars = hvc_put_chars, - .notifier_add = notifier_add_irq, - .notifier_del = notifier_del_irq, - .notifier_hangup = notifier_hangup_irq, -}; - -static int __devinit hvc_vio_probe(struct vio_dev *vdev, - const struct vio_device_id *id) -{ - struct hvc_struct *hp; - - /* probed with invalid parameters. */ - if (!vdev || !id) - return -EPERM; - - hp = hvc_alloc(vdev->unit_address, vdev->irq, &hvc_get_put_ops, - MAX_VIO_PUT_CHARS); - if (IS_ERR(hp)) - return PTR_ERR(hp); - dev_set_drvdata(&vdev->dev, hp); - - return 0; -} - -static int __devexit hvc_vio_remove(struct vio_dev *vdev) -{ - struct hvc_struct *hp = dev_get_drvdata(&vdev->dev); - - return hvc_remove(hp); -} - -static struct vio_driver hvc_vio_driver = { - .id_table = hvc_driver_table, - .probe = hvc_vio_probe, - .remove = __devexit_p(hvc_vio_remove), - .driver = { - .name = hvc_driver_name, - .owner = THIS_MODULE, - } -}; - -static int __init hvc_vio_init(void) -{ - int rc; - - if (firmware_has_feature(FW_FEATURE_ISERIES)) - return -EIO; - - /* Register as a vio device to receive callbacks */ - rc = vio_register_driver(&hvc_vio_driver); - - return rc; -} -module_init(hvc_vio_init); /* after drivers/char/hvc_console.c */ - -static void __exit hvc_vio_exit(void) -{ - vio_unregister_driver(&hvc_vio_driver); -} -module_exit(hvc_vio_exit); - -/* the device tree order defines our numbering */ -static int hvc_find_vtys(void) -{ - struct device_node *vty; - int num_found = 0; - - for (vty = of_find_node_by_name(NULL, "vty"); vty != NULL; - vty = of_find_node_by_name(vty, "vty")) { - const uint32_t *vtermno; - - /* We have statically defined space for only a certain number - * of console adapters. - */ - if (num_found >= MAX_NR_HVC_CONSOLES) { - of_node_put(vty); - break; - } - - vtermno = of_get_property(vty, "reg", NULL); - if (!vtermno) - continue; - - if (of_device_is_compatible(vty, "hvterm1")) { - hvc_instantiate(*vtermno, num_found, &hvc_get_put_ops); - ++num_found; - } - } - - return num_found; -} -console_initcall(hvc_find_vtys); diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c deleted file mode 100644 index 3740e327f180..000000000000 --- a/drivers/char/hvc_xen.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * xen console driver interface to hvc_console.c - * - * (c) 2007 Gerd Hoffmann - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include - -#include - -#include -#include -#include -#include -#include - -#include "hvc_console.h" - -#define HVC_COOKIE 0x58656e /* "Xen" in hex */ - -static struct hvc_struct *hvc; -static int xencons_irq; - -/* ------------------------------------------------------------------ */ - -static unsigned long console_pfn = ~0ul; - -static inline struct xencons_interface *xencons_interface(void) -{ - if (console_pfn == ~0ul) - return mfn_to_virt(xen_start_info->console.domU.mfn); - else - return __va(console_pfn << PAGE_SHIFT); -} - -static inline void notify_daemon(void) -{ - /* Use evtchn: this is called early, before irq is set up. */ - notify_remote_via_evtchn(xen_start_info->console.domU.evtchn); -} - -static int __write_console(const char *data, int len) -{ - struct xencons_interface *intf = xencons_interface(); - XENCONS_RING_IDX cons, prod; - int sent = 0; - - cons = intf->out_cons; - prod = intf->out_prod; - mb(); /* update queue values before going on */ - BUG_ON((prod - cons) > sizeof(intf->out)); - - while ((sent < len) && ((prod - cons) < sizeof(intf->out))) - intf->out[MASK_XENCONS_IDX(prod++, intf->out)] = data[sent++]; - - wmb(); /* write ring before updating pointer */ - intf->out_prod = prod; - - if (sent) - notify_daemon(); - return sent; -} - -static int domU_write_console(uint32_t vtermno, const char *data, int len) -{ - int ret = len; - - /* - * Make sure the whole buffer is emitted, polling if - * necessary. We don't ever want to rely on the hvc daemon - * because the most interesting console output is when the - * kernel is crippled. - */ - while (len) { - int sent = __write_console(data, len); - - data += sent; - len -= sent; - - if (unlikely(len)) - HYPERVISOR_sched_op(SCHEDOP_yield, NULL); - } - - return ret; -} - -static int domU_read_console(uint32_t vtermno, char *buf, int len) -{ - struct xencons_interface *intf = xencons_interface(); - XENCONS_RING_IDX cons, prod; - int recv = 0; - - cons = intf->in_cons; - prod = intf->in_prod; - mb(); /* get pointers before reading ring */ - BUG_ON((prod - cons) > sizeof(intf->in)); - - while (cons != prod && recv < len) - buf[recv++] = intf->in[MASK_XENCONS_IDX(cons++, intf->in)]; - - mb(); /* read ring before consuming */ - intf->in_cons = cons; - - notify_daemon(); - return recv; -} - -static struct hv_ops domU_hvc_ops = { - .get_chars = domU_read_console, - .put_chars = domU_write_console, - .notifier_add = notifier_add_irq, - .notifier_del = notifier_del_irq, - .notifier_hangup = notifier_hangup_irq, -}; - -static int dom0_read_console(uint32_t vtermno, char *buf, int len) -{ - return HYPERVISOR_console_io(CONSOLEIO_read, len, buf); -} - -/* - * Either for a dom0 to write to the system console, or a domU with a - * debug version of Xen - */ -static int dom0_write_console(uint32_t vtermno, const char *str, int len) -{ - int rc = HYPERVISOR_console_io(CONSOLEIO_write, len, (char *)str); - if (rc < 0) - return 0; - - return len; -} - -static struct hv_ops dom0_hvc_ops = { - .get_chars = dom0_read_console, - .put_chars = dom0_write_console, - .notifier_add = notifier_add_irq, - .notifier_del = notifier_del_irq, - .notifier_hangup = notifier_hangup_irq, -}; - -static int __init xen_hvc_init(void) -{ - struct hvc_struct *hp; - struct hv_ops *ops; - - if (!xen_pv_domain()) - return -ENODEV; - - if (xen_initial_domain()) { - ops = &dom0_hvc_ops; - xencons_irq = bind_virq_to_irq(VIRQ_CONSOLE, 0); - } else { - if (!xen_start_info->console.domU.evtchn) - return -ENODEV; - - ops = &domU_hvc_ops; - xencons_irq = bind_evtchn_to_irq(xen_start_info->console.domU.evtchn); - } - if (xencons_irq < 0) - xencons_irq = 0; /* NO_IRQ */ - - hp = hvc_alloc(HVC_COOKIE, xencons_irq, ops, 256); - if (IS_ERR(hp)) - return PTR_ERR(hp); - - hvc = hp; - - console_pfn = mfn_to_pfn(xen_start_info->console.domU.mfn); - - return 0; -} - -void xen_console_resume(void) -{ - if (xencons_irq) - rebind_evtchn_irq(xen_start_info->console.domU.evtchn, xencons_irq); -} - -static void __exit xen_hvc_fini(void) -{ - if (hvc) - hvc_remove(hvc); -} - -static int xen_cons_init(void) -{ - struct hv_ops *ops; - - if (!xen_pv_domain()) - return 0; - - if (xen_initial_domain()) - ops = &dom0_hvc_ops; - else - ops = &domU_hvc_ops; - - hvc_instantiate(HVC_COOKIE, 0, ops); - return 0; -} - -module_init(xen_hvc_init); -module_exit(xen_hvc_fini); -console_initcall(xen_cons_init); - -#ifdef CONFIG_EARLY_PRINTK -static void xenboot_write_console(struct console *console, const char *string, - unsigned len) -{ - unsigned int linelen, off = 0; - const char *pos; - - dom0_write_console(0, string, len); - - if (xen_initial_domain()) - return; - - domU_write_console(0, "(early) ", 8); - while (off < len && NULL != (pos = strchr(string+off, '\n'))) { - linelen = pos-string+off; - if (off + linelen > len) - break; - domU_write_console(0, string+off, linelen); - domU_write_console(0, "\r\n", 2); - off += linelen + 1; - } - if (off < len) - domU_write_console(0, string+off, len-off); -} - -struct console xenboot_console = { - .name = "xenboot", - .write = xenboot_write_console, - .flags = CON_PRINTBUFFER | CON_BOOT | CON_ANYTIME, -}; -#endif /* CONFIG_EARLY_PRINTK */ - -void xen_raw_console_write(const char *str) -{ - dom0_write_console(0, str, strlen(str)); -} - -void xen_raw_printk(const char *fmt, ...) -{ - static char buf[512]; - va_list ap; - - va_start(ap, fmt); - vsnprintf(buf, sizeof(buf), fmt, ap); - va_end(ap); - - xen_raw_console_write(buf); -} diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c deleted file mode 100644 index bedc6c1b6fa5..000000000000 --- a/drivers/char/hvcs.c +++ /dev/null @@ -1,1604 +0,0 @@ -/* - * IBM eServer Hypervisor Virtual Console Server Device Driver - * Copyright (C) 2003, 2004 IBM Corp. - * Ryan S. Arnold (rsa@us.ibm.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Author(s) : Ryan S. Arnold - * - * This is the device driver for the IBM Hypervisor Virtual Console Server, - * "hvcs". The IBM hvcs provides a tty driver interface to allow Linux - * user space applications access to the system consoles of logically - * partitioned operating systems, e.g. Linux, running on the same partitioned - * Power5 ppc64 system. Physical hardware consoles per partition are not - * practical on this hardware so system consoles are accessed by this driver - * using inter-partition firmware interfaces to virtual terminal devices. - * - * A vty is known to the HMC as a "virtual serial server adapter". It is a - * virtual terminal device that is created by firmware upon partition creation - * to act as a partitioned OS's console device. - * - * Firmware dynamically (via hotplug) exposes vty-servers to a running ppc64 - * Linux system upon their creation by the HMC or their exposure during boot. - * The non-user interactive backend of this driver is implemented as a vio - * device driver so that it can receive notification of vty-server lifetimes - * after it registers with the vio bus to handle vty-server probe and remove - * callbacks. - * - * Many vty-servers can be configured to connect to one vty, but a vty can - * only be actively connected to by a single vty-server, in any manner, at one - * time. If the HMC is currently hosting the console for a target Linux - * partition; attempts to open the tty device to the partition's console using - * the hvcs on any partition will return -EBUSY with every open attempt until - * the HMC frees the connection between its vty-server and the desired - * partition's vty device. Conversely, a vty-server may only be connected to - * a single vty at one time even though it may have several configured vty - * partner possibilities. - * - * Firmware does not provide notification of vty partner changes to this - * driver. This means that an HMC Super Admin may add or remove partner vtys - * from a vty-server's partner list but the changes will not be signaled to - * the vty-server. Firmware only notifies the driver when a vty-server is - * added or removed from the system. To compensate for this deficiency, this - * driver implements a sysfs update attribute which provides a method for - * rescanning partner information upon a user's request. - * - * Each vty-server, prior to being exposed to this driver is reference counted - * using the 2.6 Linux kernel kref construct. - * - * For direction on installation and usage of this driver please reference - * Documentation/powerpc/hvcs.txt. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * 1.3.0 -> 1.3.1 In hvcs_open memset(..,0x00,..) instead of memset(..,0x3F,00). - * Removed braces around single statements following conditionals. Removed '= - * 0' after static int declarations since these default to zero. Removed - * list_for_each_safe() and replaced with list_for_each_entry() in - * hvcs_get_by_index(). The 'safe' version is un-needed now that the driver is - * using spinlocks. Changed spin_lock_irqsave() to spin_lock() when locking - * hvcs_structs_lock and hvcs_pi_lock since these are not touched in an int - * handler. Initialized hvcs_structs_lock and hvcs_pi_lock to - * SPIN_LOCK_UNLOCKED at declaration time rather than in hvcs_module_init(). - * Added spin_lock around list_del() in destroy_hvcs_struct() to protect the - * list traversals from a deletion. Removed '= NULL' from pointer declaration - * statements since they are initialized NULL by default. Removed wmb() - * instances from hvcs_try_write(). They probably aren't needed with locking in - * place. Added check and cleanup for hvcs_pi_buff = kmalloc() in - * hvcs_module_init(). Exposed hvcs_struct.index via a sysfs attribute so that - * the coupling between /dev/hvcs* and a vty-server can be automatically - * determined. Moved kobject_put() in hvcs_open outside of the - * spin_unlock_irqrestore(). - * - * 1.3.1 -> 1.3.2 Changed method for determining hvcs_struct->index and had it - * align with how the tty layer always assigns the lowest index available. This - * change resulted in a list of ints that denotes which indexes are available. - * Device additions and removals use the new hvcs_get_index() and - * hvcs_return_index() helper functions. The list is created with - * hvsc_alloc_index_list() and it is destroyed with hvcs_free_index_list(). - * Without these fixes hotplug vty-server adapter support goes crazy with this - * driver if the user removes a vty-server adapter. Moved free_irq() outside of - * the hvcs_final_close() function in order to get it out of the spinlock. - * Rearranged hvcs_close(). Cleaned up some printks and did some housekeeping - * on the changelog. Removed local CLC_LENGTH and used HVCS_CLC_LENGTH from - * arch/powerepc/include/asm/hvcserver.h - * - * 1.3.2 -> 1.3.3 Replaced yield() in hvcs_close() with tty_wait_until_sent() to - * prevent possible lockup with realtime scheduling as similarily pointed out by - * akpm in hvc_console. Changed resulted in the removal of hvcs_final_close() - * to reorder cleanup operations and prevent discarding of pending data during - * an hvcs_close(). Removed spinlock protection of hvcs_struct data members in - * hvcs_write_room() and hvcs_chars_in_buffer() because they aren't needed. - */ - -#define HVCS_DRIVER_VERSION "1.3.3" - -MODULE_AUTHOR("Ryan S. Arnold "); -MODULE_DESCRIPTION("IBM hvcs (Hypervisor Virtual Console Server) Driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(HVCS_DRIVER_VERSION); - -/* - * Wait this long per iteration while trying to push buffered data to the - * hypervisor before allowing the tty to complete a close operation. - */ -#define HVCS_CLOSE_WAIT (HZ/100) /* 1/10 of a second */ - -/* - * Since the Linux TTY code does not currently (2-04-2004) support dynamic - * addition of tty derived devices and we shouldn't allocate thousands of - * tty_device pointers when the number of vty-server & vty partner connections - * will most often be much lower than this, we'll arbitrarily allocate - * HVCS_DEFAULT_SERVER_ADAPTERS tty_structs and cdev's by default when we - * register the tty_driver. This can be overridden using an insmod parameter. - */ -#define HVCS_DEFAULT_SERVER_ADAPTERS 64 - -/* - * The user can't insmod with more than HVCS_MAX_SERVER_ADAPTERS hvcs device - * nodes as a sanity check. Theoretically there can be over 1 Billion - * vty-server & vty partner connections. - */ -#define HVCS_MAX_SERVER_ADAPTERS 1024 - -/* - * We let Linux assign us a major number and we start the minors at zero. There - * is no intuitive mapping between minor number and the target vty-server - * adapter except that each new vty-server adapter is always assigned to the - * smallest minor number available. - */ -#define HVCS_MINOR_START 0 - -/* - * The hcall interface involves putting 8 chars into each of two registers. - * We load up those 2 registers (in arch/powerpc/platforms/pseries/hvconsole.c) - * by casting char[16] to long[2]. It would work without __ALIGNED__, but a - * little (tiny) bit slower because an unaligned load is slower than aligned - * load. - */ -#define __ALIGNED__ __attribute__((__aligned__(8))) - -/* - * How much data can firmware send with each hvc_put_chars()? Maybe this - * should be moved into an architecture specific area. - */ -#define HVCS_BUFF_LEN 16 - -/* - * This is the maximum amount of data we'll let the user send us (hvcs_write) at - * once in a chunk as a sanity check. - */ -#define HVCS_MAX_FROM_USER 4096 - -/* - * Be careful when adding flags to this line discipline. Don't add anything - * that will cause echoing or we'll go into recursive loop echoing chars back - * and forth with the console drivers. - */ -static struct ktermios hvcs_tty_termios = { - .c_iflag = IGNBRK | IGNPAR, - .c_oflag = OPOST, - .c_cflag = B38400 | CS8 | CREAD | HUPCL, - .c_cc = INIT_C_CC, - .c_ispeed = 38400, - .c_ospeed = 38400 -}; - -/* - * This value is used to take the place of a command line parameter when the - * module is inserted. It starts as -1 and stays as such if the user doesn't - * specify a module insmod parameter. If they DO specify one then it is set to - * the value of the integer passed in. - */ -static int hvcs_parm_num_devs = -1; -module_param(hvcs_parm_num_devs, int, 0); - -static const char hvcs_driver_name[] = "hvcs"; -static const char hvcs_device_node[] = "hvcs"; -static const char hvcs_driver_string[] - = "IBM hvcs (Hypervisor Virtual Console Server) Driver"; - -/* Status of partner info rescan triggered via sysfs. */ -static int hvcs_rescan_status; - -static struct tty_driver *hvcs_tty_driver; - -/* - * In order to be somewhat sane this driver always associates the hvcs_struct - * index element with the numerically equal tty->index. This means that a - * hotplugged vty-server adapter will always map to the lowest index valued - * device node. If vty-servers were hotplug removed from the system and then - * new ones added the new vty-server may have the largest slot number of all - * the vty-server adapters in the partition but it may have the lowest dev node - * index of all the adapters due to the hole left by the hotplug removed - * adapter. There are a set of functions provided to get the lowest index for - * a new device as well as return the index to the list. This list is allocated - * with a number of elements equal to the number of device nodes requested when - * the module was inserted. - */ -static int *hvcs_index_list; - -/* - * How large is the list? This is kept for traversal since the list is - * dynamically created. - */ -static int hvcs_index_count; - -/* - * Used by the khvcsd to pick up I/O operations when the kernel_thread is - * already awake but potentially shifted to TASK_INTERRUPTIBLE state. - */ -static int hvcs_kicked; - -/* - * Use by the kthread construct for task operations like waking the sleeping - * thread and stopping the kthread. - */ -static struct task_struct *hvcs_task; - -/* - * We allocate this for the use of all of the hvcs_structs when they fetch - * partner info. - */ -static unsigned long *hvcs_pi_buff; - -/* Only allow one hvcs_struct to use the hvcs_pi_buff at a time. */ -static DEFINE_SPINLOCK(hvcs_pi_lock); - -/* One vty-server per hvcs_struct */ -struct hvcs_struct { - spinlock_t lock; - - /* - * This index identifies this hvcs device as the complement to a - * specific tty index. - */ - unsigned int index; - - struct tty_struct *tty; - int open_count; - - /* - * Used to tell the driver kernel_thread what operations need to take - * place upon this hvcs_struct instance. - */ - int todo_mask; - - /* - * This buffer is required so that when hvcs_write_room() reports that - * it can send HVCS_BUFF_LEN characters that it will buffer the full - * HVCS_BUFF_LEN characters if need be. This is essential for opost - * writes since they do not do high level buffering and expect to be - * able to send what the driver commits to sending buffering - * [e.g. tab to space conversions in n_tty.c opost()]. - */ - char buffer[HVCS_BUFF_LEN]; - int chars_in_buffer; - - /* - * Any variable below the kref is valid before a tty is connected and - * stays valid after the tty is disconnected. These shouldn't be - * whacked until the koject refcount reaches zero though some entries - * may be changed via sysfs initiatives. - */ - struct kref kref; /* ref count & hvcs_struct lifetime */ - int connected; /* is the vty-server currently connected to a vty? */ - uint32_t p_unit_address; /* partner unit address */ - uint32_t p_partition_ID; /* partner partition ID */ - char p_location_code[HVCS_CLC_LENGTH + 1]; /* CLC + Null Term */ - struct list_head next; /* list management */ - struct vio_dev *vdev; -}; - -/* Required to back map a kref to its containing object */ -#define from_kref(k) container_of(k, struct hvcs_struct, kref) - -static LIST_HEAD(hvcs_structs); -static DEFINE_SPINLOCK(hvcs_structs_lock); - -static void hvcs_unthrottle(struct tty_struct *tty); -static void hvcs_throttle(struct tty_struct *tty); -static irqreturn_t hvcs_handle_interrupt(int irq, void *dev_instance); - -static int hvcs_write(struct tty_struct *tty, - const unsigned char *buf, int count); -static int hvcs_write_room(struct tty_struct *tty); -static int hvcs_chars_in_buffer(struct tty_struct *tty); - -static int hvcs_has_pi(struct hvcs_struct *hvcsd); -static void hvcs_set_pi(struct hvcs_partner_info *pi, - struct hvcs_struct *hvcsd); -static int hvcs_get_pi(struct hvcs_struct *hvcsd); -static int hvcs_rescan_devices_list(void); - -static int hvcs_partner_connect(struct hvcs_struct *hvcsd); -static void hvcs_partner_free(struct hvcs_struct *hvcsd); - -static int hvcs_enable_device(struct hvcs_struct *hvcsd, - uint32_t unit_address, unsigned int irq, struct vio_dev *dev); - -static int hvcs_open(struct tty_struct *tty, struct file *filp); -static void hvcs_close(struct tty_struct *tty, struct file *filp); -static void hvcs_hangup(struct tty_struct * tty); - -static int __devinit hvcs_probe(struct vio_dev *dev, - const struct vio_device_id *id); -static int __devexit hvcs_remove(struct vio_dev *dev); -static int __init hvcs_module_init(void); -static void __exit hvcs_module_exit(void); - -#define HVCS_SCHED_READ 0x00000001 -#define HVCS_QUICK_READ 0x00000002 -#define HVCS_TRY_WRITE 0x00000004 -#define HVCS_READ_MASK (HVCS_SCHED_READ | HVCS_QUICK_READ) - -static inline struct hvcs_struct *from_vio_dev(struct vio_dev *viod) -{ - return dev_get_drvdata(&viod->dev); -} -/* The sysfs interface for the driver and devices */ - -static ssize_t hvcs_partner_vtys_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct vio_dev *viod = to_vio_dev(dev); - struct hvcs_struct *hvcsd = from_vio_dev(viod); - unsigned long flags; - int retval; - - spin_lock_irqsave(&hvcsd->lock, flags); - retval = sprintf(buf, "%X\n", hvcsd->p_unit_address); - spin_unlock_irqrestore(&hvcsd->lock, flags); - return retval; -} -static DEVICE_ATTR(partner_vtys, S_IRUGO, hvcs_partner_vtys_show, NULL); - -static ssize_t hvcs_partner_clcs_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct vio_dev *viod = to_vio_dev(dev); - struct hvcs_struct *hvcsd = from_vio_dev(viod); - unsigned long flags; - int retval; - - spin_lock_irqsave(&hvcsd->lock, flags); - retval = sprintf(buf, "%s\n", &hvcsd->p_location_code[0]); - spin_unlock_irqrestore(&hvcsd->lock, flags); - return retval; -} -static DEVICE_ATTR(partner_clcs, S_IRUGO, hvcs_partner_clcs_show, NULL); - -static ssize_t hvcs_current_vty_store(struct device *dev, struct device_attribute *attr, const char * buf, - size_t count) -{ - /* - * Don't need this feature at the present time because firmware doesn't - * yet support multiple partners. - */ - printk(KERN_INFO "HVCS: Denied current_vty change: -EPERM.\n"); - return -EPERM; -} - -static ssize_t hvcs_current_vty_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct vio_dev *viod = to_vio_dev(dev); - struct hvcs_struct *hvcsd = from_vio_dev(viod); - unsigned long flags; - int retval; - - spin_lock_irqsave(&hvcsd->lock, flags); - retval = sprintf(buf, "%s\n", &hvcsd->p_location_code[0]); - spin_unlock_irqrestore(&hvcsd->lock, flags); - return retval; -} - -static DEVICE_ATTR(current_vty, - S_IRUGO | S_IWUSR, hvcs_current_vty_show, hvcs_current_vty_store); - -static ssize_t hvcs_vterm_state_store(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - struct vio_dev *viod = to_vio_dev(dev); - struct hvcs_struct *hvcsd = from_vio_dev(viod); - unsigned long flags; - - /* writing a '0' to this sysfs entry will result in the disconnect. */ - if (simple_strtol(buf, NULL, 0) != 0) - return -EINVAL; - - spin_lock_irqsave(&hvcsd->lock, flags); - - if (hvcsd->open_count > 0) { - spin_unlock_irqrestore(&hvcsd->lock, flags); - printk(KERN_INFO "HVCS: vterm state unchanged. " - "The hvcs device node is still in use.\n"); - return -EPERM; - } - - if (hvcsd->connected == 0) { - spin_unlock_irqrestore(&hvcsd->lock, flags); - printk(KERN_INFO "HVCS: vterm state unchanged. The" - " vty-server is not connected to a vty.\n"); - return -EPERM; - } - - hvcs_partner_free(hvcsd); - printk(KERN_INFO "HVCS: Closed vty-server@%X and" - " partner vty@%X:%d connection.\n", - hvcsd->vdev->unit_address, - hvcsd->p_unit_address, - (uint32_t)hvcsd->p_partition_ID); - - spin_unlock_irqrestore(&hvcsd->lock, flags); - return count; -} - -static ssize_t hvcs_vterm_state_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct vio_dev *viod = to_vio_dev(dev); - struct hvcs_struct *hvcsd = from_vio_dev(viod); - unsigned long flags; - int retval; - - spin_lock_irqsave(&hvcsd->lock, flags); - retval = sprintf(buf, "%d\n", hvcsd->connected); - spin_unlock_irqrestore(&hvcsd->lock, flags); - return retval; -} -static DEVICE_ATTR(vterm_state, S_IRUGO | S_IWUSR, - hvcs_vterm_state_show, hvcs_vterm_state_store); - -static ssize_t hvcs_index_show(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct vio_dev *viod = to_vio_dev(dev); - struct hvcs_struct *hvcsd = from_vio_dev(viod); - unsigned long flags; - int retval; - - spin_lock_irqsave(&hvcsd->lock, flags); - retval = sprintf(buf, "%d\n", hvcsd->index); - spin_unlock_irqrestore(&hvcsd->lock, flags); - return retval; -} - -static DEVICE_ATTR(index, S_IRUGO, hvcs_index_show, NULL); - -static struct attribute *hvcs_attrs[] = { - &dev_attr_partner_vtys.attr, - &dev_attr_partner_clcs.attr, - &dev_attr_current_vty.attr, - &dev_attr_vterm_state.attr, - &dev_attr_index.attr, - NULL, -}; - -static struct attribute_group hvcs_attr_group = { - .attrs = hvcs_attrs, -}; - -static ssize_t hvcs_rescan_show(struct device_driver *ddp, char *buf) -{ - /* A 1 means it is updating, a 0 means it is done updating */ - return snprintf(buf, PAGE_SIZE, "%d\n", hvcs_rescan_status); -} - -static ssize_t hvcs_rescan_store(struct device_driver *ddp, const char * buf, - size_t count) -{ - if ((simple_strtol(buf, NULL, 0) != 1) - && (hvcs_rescan_status != 0)) - return -EINVAL; - - hvcs_rescan_status = 1; - printk(KERN_INFO "HVCS: rescanning partner info for all" - " vty-servers.\n"); - hvcs_rescan_devices_list(); - hvcs_rescan_status = 0; - return count; -} - -static DRIVER_ATTR(rescan, - S_IRUGO | S_IWUSR, hvcs_rescan_show, hvcs_rescan_store); - -static void hvcs_kick(void) -{ - hvcs_kicked = 1; - wmb(); - wake_up_process(hvcs_task); -} - -static void hvcs_unthrottle(struct tty_struct *tty) -{ - struct hvcs_struct *hvcsd = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&hvcsd->lock, flags); - hvcsd->todo_mask |= HVCS_SCHED_READ; - spin_unlock_irqrestore(&hvcsd->lock, flags); - hvcs_kick(); -} - -static void hvcs_throttle(struct tty_struct *tty) -{ - struct hvcs_struct *hvcsd = tty->driver_data; - unsigned long flags; - - spin_lock_irqsave(&hvcsd->lock, flags); - vio_disable_interrupts(hvcsd->vdev); - spin_unlock_irqrestore(&hvcsd->lock, flags); -} - -/* - * If the device is being removed we don't have to worry about this interrupt - * handler taking any further interrupts because they are disabled which means - * the hvcs_struct will always be valid in this handler. - */ -static irqreturn_t hvcs_handle_interrupt(int irq, void *dev_instance) -{ - struct hvcs_struct *hvcsd = dev_instance; - - spin_lock(&hvcsd->lock); - vio_disable_interrupts(hvcsd->vdev); - hvcsd->todo_mask |= HVCS_SCHED_READ; - spin_unlock(&hvcsd->lock); - hvcs_kick(); - - return IRQ_HANDLED; -} - -/* This function must be called with the hvcsd->lock held */ -static void hvcs_try_write(struct hvcs_struct *hvcsd) -{ - uint32_t unit_address = hvcsd->vdev->unit_address; - struct tty_struct *tty = hvcsd->tty; - int sent; - - if (hvcsd->todo_mask & HVCS_TRY_WRITE) { - /* won't send partial writes */ - sent = hvc_put_chars(unit_address, - &hvcsd->buffer[0], - hvcsd->chars_in_buffer ); - if (sent > 0) { - hvcsd->chars_in_buffer = 0; - /* wmb(); */ - hvcsd->todo_mask &= ~(HVCS_TRY_WRITE); - /* wmb(); */ - - /* - * We are still obligated to deliver the data to the - * hypervisor even if the tty has been closed because - * we commited to delivering it. But don't try to wake - * a non-existent tty. - */ - if (tty) { - tty_wakeup(tty); - } - } - } -} - -static int hvcs_io(struct hvcs_struct *hvcsd) -{ - uint32_t unit_address; - struct tty_struct *tty; - char buf[HVCS_BUFF_LEN] __ALIGNED__; - unsigned long flags; - int got = 0; - - spin_lock_irqsave(&hvcsd->lock, flags); - - unit_address = hvcsd->vdev->unit_address; - tty = hvcsd->tty; - - hvcs_try_write(hvcsd); - - if (!tty || test_bit(TTY_THROTTLED, &tty->flags)) { - hvcsd->todo_mask &= ~(HVCS_READ_MASK); - goto bail; - } else if (!(hvcsd->todo_mask & (HVCS_READ_MASK))) - goto bail; - - /* remove the read masks */ - hvcsd->todo_mask &= ~(HVCS_READ_MASK); - - if (tty_buffer_request_room(tty, HVCS_BUFF_LEN) >= HVCS_BUFF_LEN) { - got = hvc_get_chars(unit_address, - &buf[0], - HVCS_BUFF_LEN); - tty_insert_flip_string(tty, buf, got); - } - - /* Give the TTY time to process the data we just sent. */ - if (got) - hvcsd->todo_mask |= HVCS_QUICK_READ; - - spin_unlock_irqrestore(&hvcsd->lock, flags); - /* This is synch because tty->low_latency == 1 */ - if(got) - tty_flip_buffer_push(tty); - - if (!got) { - /* Do this _after_ the flip_buffer_push */ - spin_lock_irqsave(&hvcsd->lock, flags); - vio_enable_interrupts(hvcsd->vdev); - spin_unlock_irqrestore(&hvcsd->lock, flags); - } - - return hvcsd->todo_mask; - - bail: - spin_unlock_irqrestore(&hvcsd->lock, flags); - return hvcsd->todo_mask; -} - -static int khvcsd(void *unused) -{ - struct hvcs_struct *hvcsd; - int hvcs_todo_mask; - - __set_current_state(TASK_RUNNING); - - do { - hvcs_todo_mask = 0; - hvcs_kicked = 0; - wmb(); - - spin_lock(&hvcs_structs_lock); - list_for_each_entry(hvcsd, &hvcs_structs, next) { - hvcs_todo_mask |= hvcs_io(hvcsd); - } - spin_unlock(&hvcs_structs_lock); - - /* - * If any of the hvcs adapters want to try a write or quick read - * don't schedule(), yield a smidgen then execute the hvcs_io - * thread again for those that want the write. - */ - if (hvcs_todo_mask & (HVCS_TRY_WRITE | HVCS_QUICK_READ)) { - yield(); - continue; - } - - set_current_state(TASK_INTERRUPTIBLE); - if (!hvcs_kicked) - schedule(); - __set_current_state(TASK_RUNNING); - } while (!kthread_should_stop()); - - return 0; -} - -static struct vio_device_id hvcs_driver_table[] __devinitdata= { - {"serial-server", "hvterm2"}, - { "", "" } -}; -MODULE_DEVICE_TABLE(vio, hvcs_driver_table); - -static void hvcs_return_index(int index) -{ - /* Paranoia check */ - if (!hvcs_index_list) - return; - if (index < 0 || index >= hvcs_index_count) - return; - if (hvcs_index_list[index] == -1) - return; - else - hvcs_index_list[index] = -1; -} - -/* callback when the kref ref count reaches zero */ -static void destroy_hvcs_struct(struct kref *kref) -{ - struct hvcs_struct *hvcsd = from_kref(kref); - struct vio_dev *vdev; - unsigned long flags; - - spin_lock(&hvcs_structs_lock); - spin_lock_irqsave(&hvcsd->lock, flags); - - /* the list_del poisons the pointers */ - list_del(&(hvcsd->next)); - - if (hvcsd->connected == 1) { - hvcs_partner_free(hvcsd); - printk(KERN_INFO "HVCS: Closed vty-server@%X and" - " partner vty@%X:%d connection.\n", - hvcsd->vdev->unit_address, - hvcsd->p_unit_address, - (uint32_t)hvcsd->p_partition_ID); - } - printk(KERN_INFO "HVCS: Destroyed hvcs_struct for vty-server@%X.\n", - hvcsd->vdev->unit_address); - - vdev = hvcsd->vdev; - hvcsd->vdev = NULL; - - hvcsd->p_unit_address = 0; - hvcsd->p_partition_ID = 0; - hvcs_return_index(hvcsd->index); - memset(&hvcsd->p_location_code[0], 0x00, HVCS_CLC_LENGTH + 1); - - spin_unlock_irqrestore(&hvcsd->lock, flags); - spin_unlock(&hvcs_structs_lock); - - sysfs_remove_group(&vdev->dev.kobj, &hvcs_attr_group); - - kfree(hvcsd); -} - -static int hvcs_get_index(void) -{ - int i; - /* Paranoia check */ - if (!hvcs_index_list) { - printk(KERN_ERR "HVCS: hvcs_index_list NOT valid!.\n"); - return -EFAULT; - } - /* Find the numerically lowest first free index. */ - for(i = 0; i < hvcs_index_count; i++) { - if (hvcs_index_list[i] == -1) { - hvcs_index_list[i] = 0; - return i; - } - } - return -1; -} - -static int __devinit hvcs_probe( - struct vio_dev *dev, - const struct vio_device_id *id) -{ - struct hvcs_struct *hvcsd; - int index; - int retval; - - if (!dev || !id) { - printk(KERN_ERR "HVCS: probed with invalid parameter.\n"); - return -EPERM; - } - - /* early to avoid cleanup on failure */ - index = hvcs_get_index(); - if (index < 0) { - return -EFAULT; - } - - hvcsd = kzalloc(sizeof(*hvcsd), GFP_KERNEL); - if (!hvcsd) - return -ENODEV; - - - spin_lock_init(&hvcsd->lock); - /* Automatically incs the refcount the first time */ - kref_init(&hvcsd->kref); - - hvcsd->vdev = dev; - dev_set_drvdata(&dev->dev, hvcsd); - - hvcsd->index = index; - - /* hvcsd->index = ++hvcs_struct_count; */ - hvcsd->chars_in_buffer = 0; - hvcsd->todo_mask = 0; - hvcsd->connected = 0; - - /* - * This will populate the hvcs_struct's partner info fields for the - * first time. - */ - if (hvcs_get_pi(hvcsd)) { - printk(KERN_ERR "HVCS: Failed to fetch partner" - " info for vty-server@%X on device probe.\n", - hvcsd->vdev->unit_address); - } - - /* - * If a user app opens a tty that corresponds to this vty-server before - * the hvcs_struct has been added to the devices list then the user app - * will get -ENODEV. - */ - spin_lock(&hvcs_structs_lock); - list_add_tail(&(hvcsd->next), &hvcs_structs); - spin_unlock(&hvcs_structs_lock); - - retval = sysfs_create_group(&dev->dev.kobj, &hvcs_attr_group); - if (retval) { - printk(KERN_ERR "HVCS: Can't create sysfs attrs for vty-server@%X\n", - hvcsd->vdev->unit_address); - return retval; - } - - printk(KERN_INFO "HVCS: vty-server@%X added to the vio bus.\n", dev->unit_address); - - /* - * DON'T enable interrupts here because there is no user to receive the - * data. - */ - return 0; -} - -static int __devexit hvcs_remove(struct vio_dev *dev) -{ - struct hvcs_struct *hvcsd = dev_get_drvdata(&dev->dev); - unsigned long flags; - struct tty_struct *tty; - - if (!hvcsd) - return -ENODEV; - - /* By this time the vty-server won't be getting any more interrupts */ - - spin_lock_irqsave(&hvcsd->lock, flags); - - tty = hvcsd->tty; - - spin_unlock_irqrestore(&hvcsd->lock, flags); - - /* - * Let the last holder of this object cause it to be removed, which - * would probably be tty_hangup below. - */ - kref_put(&hvcsd->kref, destroy_hvcs_struct); - - /* - * The hangup is a scheduled function which will auto chain call - * hvcs_hangup. The tty should always be valid at this time unless a - * simultaneous tty close already cleaned up the hvcs_struct. - */ - if (tty) - tty_hangup(tty); - - printk(KERN_INFO "HVCS: vty-server@%X removed from the" - " vio bus.\n", dev->unit_address); - return 0; -}; - -static struct vio_driver hvcs_vio_driver = { - .id_table = hvcs_driver_table, - .probe = hvcs_probe, - .remove = __devexit_p(hvcs_remove), - .driver = { - .name = hvcs_driver_name, - .owner = THIS_MODULE, - } -}; - -/* Only called from hvcs_get_pi please */ -static void hvcs_set_pi(struct hvcs_partner_info *pi, struct hvcs_struct *hvcsd) -{ - int clclength; - - hvcsd->p_unit_address = pi->unit_address; - hvcsd->p_partition_ID = pi->partition_ID; - clclength = strlen(&pi->location_code[0]); - if (clclength > HVCS_CLC_LENGTH) - clclength = HVCS_CLC_LENGTH; - - /* copy the null-term char too */ - strncpy(&hvcsd->p_location_code[0], - &pi->location_code[0], clclength + 1); -} - -/* - * Traverse the list and add the partner info that is found to the hvcs_struct - * struct entry. NOTE: At this time I know that partner info will return a - * single entry but in the future there may be multiple partner info entries per - * vty-server and you'll want to zero out that list and reset it. If for some - * reason you have an old version of this driver but there IS more than one - * partner info then hvcsd->p_* will hold the last partner info data from the - * firmware query. A good way to update this code would be to replace the three - * partner info fields in hvcs_struct with a list of hvcs_partner_info - * instances. - * - * This function must be called with the hvcsd->lock held. - */ -static int hvcs_get_pi(struct hvcs_struct *hvcsd) -{ - struct hvcs_partner_info *pi; - uint32_t unit_address = hvcsd->vdev->unit_address; - struct list_head head; - int retval; - - spin_lock(&hvcs_pi_lock); - if (!hvcs_pi_buff) { - spin_unlock(&hvcs_pi_lock); - return -EFAULT; - } - retval = hvcs_get_partner_info(unit_address, &head, hvcs_pi_buff); - spin_unlock(&hvcs_pi_lock); - if (retval) { - printk(KERN_ERR "HVCS: Failed to fetch partner" - " info for vty-server@%x.\n", unit_address); - return retval; - } - - /* nixes the values if the partner vty went away */ - hvcsd->p_unit_address = 0; - hvcsd->p_partition_ID = 0; - - list_for_each_entry(pi, &head, node) - hvcs_set_pi(pi, hvcsd); - - hvcs_free_partner_info(&head); - return 0; -} - -/* - * This function is executed by the driver "rescan" sysfs entry. It shouldn't - * be executed elsewhere, in order to prevent deadlock issues. - */ -static int hvcs_rescan_devices_list(void) -{ - struct hvcs_struct *hvcsd; - unsigned long flags; - - spin_lock(&hvcs_structs_lock); - - list_for_each_entry(hvcsd, &hvcs_structs, next) { - spin_lock_irqsave(&hvcsd->lock, flags); - hvcs_get_pi(hvcsd); - spin_unlock_irqrestore(&hvcsd->lock, flags); - } - - spin_unlock(&hvcs_structs_lock); - - return 0; -} - -/* - * Farm this off into its own function because it could be more complex once - * multiple partners support is added. This function should be called with - * the hvcsd->lock held. - */ -static int hvcs_has_pi(struct hvcs_struct *hvcsd) -{ - if ((!hvcsd->p_unit_address) || (!hvcsd->p_partition_ID)) - return 0; - return 1; -} - -/* - * NOTE: It is possible that the super admin removed a partner vty and then - * added a different vty as the new partner. - * - * This function must be called with the hvcsd->lock held. - */ -static int hvcs_partner_connect(struct hvcs_struct *hvcsd) -{ - int retval; - unsigned int unit_address = hvcsd->vdev->unit_address; - - /* - * If there wasn't any pi when the device was added it doesn't meant - * there isn't any now. This driver isn't notified when a new partner - * vty is added to a vty-server so we discover changes on our own. - * Please see comments in hvcs_register_connection() for justification - * of this bizarre code. - */ - retval = hvcs_register_connection(unit_address, - hvcsd->p_partition_ID, - hvcsd->p_unit_address); - if (!retval) { - hvcsd->connected = 1; - return 0; - } else if (retval != -EINVAL) - return retval; - - /* - * As per the spec re-get the pi and try again if -EINVAL after the - * first connection attempt. - */ - if (hvcs_get_pi(hvcsd)) - return -ENOMEM; - - if (!hvcs_has_pi(hvcsd)) - return -ENODEV; - - retval = hvcs_register_connection(unit_address, - hvcsd->p_partition_ID, - hvcsd->p_unit_address); - if (retval != -EINVAL) { - hvcsd->connected = 1; - return retval; - } - - /* - * EBUSY is the most likely scenario though the vty could have been - * removed or there really could be an hcall error due to the parameter - * data but thanks to ambiguous firmware return codes we can't really - * tell. - */ - printk(KERN_INFO "HVCS: vty-server or partner" - " vty is busy. Try again later.\n"); - return -EBUSY; -} - -/* This function must be called with the hvcsd->lock held */ -static void hvcs_partner_free(struct hvcs_struct *hvcsd) -{ - int retval; - do { - retval = hvcs_free_connection(hvcsd->vdev->unit_address); - } while (retval == -EBUSY); - hvcsd->connected = 0; -} - -/* This helper function must be called WITHOUT the hvcsd->lock held */ -static int hvcs_enable_device(struct hvcs_struct *hvcsd, uint32_t unit_address, - unsigned int irq, struct vio_dev *vdev) -{ - unsigned long flags; - int rc; - - /* - * It is possible that the vty-server was removed between the time that - * the conn was registered and now. - */ - if (!(rc = request_irq(irq, &hvcs_handle_interrupt, - IRQF_DISABLED, "ibmhvcs", hvcsd))) { - /* - * It is possible the vty-server was removed after the irq was - * requested but before we have time to enable interrupts. - */ - if (vio_enable_interrupts(vdev) == H_SUCCESS) - return 0; - else { - printk(KERN_ERR "HVCS: int enable failed for" - " vty-server@%X.\n", unit_address); - free_irq(irq, hvcsd); - } - } else - printk(KERN_ERR "HVCS: irq req failed for" - " vty-server@%X.\n", unit_address); - - spin_lock_irqsave(&hvcsd->lock, flags); - hvcs_partner_free(hvcsd); - spin_unlock_irqrestore(&hvcsd->lock, flags); - - return rc; - -} - -/* - * This always increments the kref ref count if the call is successful. - * Please remember to dec when you are done with the instance. - * - * NOTICE: Do NOT hold either the hvcs_struct.lock or hvcs_structs_lock when - * calling this function or you will get deadlock. - */ -static struct hvcs_struct *hvcs_get_by_index(int index) -{ - struct hvcs_struct *hvcsd = NULL; - unsigned long flags; - - spin_lock(&hvcs_structs_lock); - /* We can immediately discard OOB requests */ - if (index >= 0 && index < HVCS_MAX_SERVER_ADAPTERS) { - list_for_each_entry(hvcsd, &hvcs_structs, next) { - spin_lock_irqsave(&hvcsd->lock, flags); - if (hvcsd->index == index) { - kref_get(&hvcsd->kref); - spin_unlock_irqrestore(&hvcsd->lock, flags); - spin_unlock(&hvcs_structs_lock); - return hvcsd; - } - spin_unlock_irqrestore(&hvcsd->lock, flags); - } - hvcsd = NULL; - } - - spin_unlock(&hvcs_structs_lock); - return hvcsd; -} - -/* - * This is invoked via the tty_open interface when a user app connects to the - * /dev node. - */ -static int hvcs_open(struct tty_struct *tty, struct file *filp) -{ - struct hvcs_struct *hvcsd; - int rc, retval = 0; - unsigned long flags; - unsigned int irq; - struct vio_dev *vdev; - unsigned long unit_address; - - if (tty->driver_data) - goto fast_open; - - /* - * Is there a vty-server that shares the same index? - * This function increments the kref index. - */ - if (!(hvcsd = hvcs_get_by_index(tty->index))) { - printk(KERN_WARNING "HVCS: open failed, no device associated" - " with tty->index %d.\n", tty->index); - return -ENODEV; - } - - spin_lock_irqsave(&hvcsd->lock, flags); - - if (hvcsd->connected == 0) - if ((retval = hvcs_partner_connect(hvcsd))) - goto error_release; - - hvcsd->open_count = 1; - hvcsd->tty = tty; - tty->driver_data = hvcsd; - - memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN); - - /* - * Save these in the spinlock for the enable operations that need them - * outside of the spinlock. - */ - irq = hvcsd->vdev->irq; - vdev = hvcsd->vdev; - unit_address = hvcsd->vdev->unit_address; - - hvcsd->todo_mask |= HVCS_SCHED_READ; - spin_unlock_irqrestore(&hvcsd->lock, flags); - - /* - * This must be done outside of the spinlock because it requests irqs - * and will grab the spinlock and free the connection if it fails. - */ - if (((rc = hvcs_enable_device(hvcsd, unit_address, irq, vdev)))) { - kref_put(&hvcsd->kref, destroy_hvcs_struct); - printk(KERN_WARNING "HVCS: enable device failed.\n"); - return rc; - } - - goto open_success; - -fast_open: - hvcsd = tty->driver_data; - - spin_lock_irqsave(&hvcsd->lock, flags); - kref_get(&hvcsd->kref); - hvcsd->open_count++; - hvcsd->todo_mask |= HVCS_SCHED_READ; - spin_unlock_irqrestore(&hvcsd->lock, flags); - -open_success: - hvcs_kick(); - - printk(KERN_INFO "HVCS: vty-server@%X connection opened.\n", - hvcsd->vdev->unit_address ); - - return 0; - -error_release: - spin_unlock_irqrestore(&hvcsd->lock, flags); - kref_put(&hvcsd->kref, destroy_hvcs_struct); - - printk(KERN_WARNING "HVCS: partner connect failed.\n"); - return retval; -} - -static void hvcs_close(struct tty_struct *tty, struct file *filp) -{ - struct hvcs_struct *hvcsd; - unsigned long flags; - int irq = NO_IRQ; - - /* - * Is someone trying to close the file associated with this device after - * we have hung up? If so tty->driver_data wouldn't be valid. - */ - if (tty_hung_up_p(filp)) - return; - - /* - * No driver_data means that this close was probably issued after a - * failed hvcs_open by the tty layer's release_dev() api and we can just - * exit cleanly. - */ - if (!tty->driver_data) - return; - - hvcsd = tty->driver_data; - - spin_lock_irqsave(&hvcsd->lock, flags); - if (--hvcsd->open_count == 0) { - - vio_disable_interrupts(hvcsd->vdev); - - /* - * NULL this early so that the kernel_thread doesn't try to - * execute any operations on the TTY even though it is obligated - * to deliver any pending I/O to the hypervisor. - */ - hvcsd->tty = NULL; - - irq = hvcsd->vdev->irq; - spin_unlock_irqrestore(&hvcsd->lock, flags); - - tty_wait_until_sent(tty, HVCS_CLOSE_WAIT); - - /* - * This line is important because it tells hvcs_open that this - * device needs to be re-configured the next time hvcs_open is - * called. - */ - tty->driver_data = NULL; - - free_irq(irq, hvcsd); - kref_put(&hvcsd->kref, destroy_hvcs_struct); - return; - } else if (hvcsd->open_count < 0) { - printk(KERN_ERR "HVCS: vty-server@%X open_count: %d" - " is missmanaged.\n", - hvcsd->vdev->unit_address, hvcsd->open_count); - } - - spin_unlock_irqrestore(&hvcsd->lock, flags); - kref_put(&hvcsd->kref, destroy_hvcs_struct); -} - -static void hvcs_hangup(struct tty_struct * tty) -{ - struct hvcs_struct *hvcsd = tty->driver_data; - unsigned long flags; - int temp_open_count; - int irq = NO_IRQ; - - spin_lock_irqsave(&hvcsd->lock, flags); - /* Preserve this so that we know how many kref refs to put */ - temp_open_count = hvcsd->open_count; - - /* - * Don't kref put inside the spinlock because the destruction - * callback may use the spinlock and it may get called before the - * spinlock has been released. - */ - vio_disable_interrupts(hvcsd->vdev); - - hvcsd->todo_mask = 0; - - /* I don't think the tty needs the hvcs_struct pointer after a hangup */ - hvcsd->tty->driver_data = NULL; - hvcsd->tty = NULL; - - hvcsd->open_count = 0; - - /* This will drop any buffered data on the floor which is OK in a hangup - * scenario. */ - memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN); - hvcsd->chars_in_buffer = 0; - - irq = hvcsd->vdev->irq; - - spin_unlock_irqrestore(&hvcsd->lock, flags); - - free_irq(irq, hvcsd); - - /* - * We need to kref_put() for every open_count we have since the - * tty_hangup() function doesn't invoke a close per open connection on a - * non-console device. - */ - while(temp_open_count) { - --temp_open_count; - /* - * The final put will trigger destruction of the hvcs_struct. - * NOTE: If this hangup was signaled from user space then the - * final put will never happen. - */ - kref_put(&hvcsd->kref, destroy_hvcs_struct); - } -} - -/* - * NOTE: This is almost always from_user since user level apps interact with the - * /dev nodes. I'm trusting that if hvcs_write gets called and interrupted by - * hvcs_remove (which removes the target device and executes tty_hangup()) that - * tty_hangup will allow hvcs_write time to complete execution before it - * terminates our device. - */ -static int hvcs_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - struct hvcs_struct *hvcsd = tty->driver_data; - unsigned int unit_address; - const unsigned char *charbuf; - unsigned long flags; - int total_sent = 0; - int tosend = 0; - int result = 0; - - /* - * If they don't check the return code off of their open they may - * attempt this even if there is no connected device. - */ - if (!hvcsd) - return -ENODEV; - - /* Reasonable size to prevent user level flooding */ - if (count > HVCS_MAX_FROM_USER) { - printk(KERN_WARNING "HVCS write: count being truncated to" - " HVCS_MAX_FROM_USER.\n"); - count = HVCS_MAX_FROM_USER; - } - - charbuf = buf; - - spin_lock_irqsave(&hvcsd->lock, flags); - - /* - * Somehow an open succedded but the device was removed or the - * connection terminated between the vty-server and partner vty during - * the middle of a write operation? This is a crummy place to do this - * but we want to keep it all in the spinlock. - */ - if (hvcsd->open_count <= 0) { - spin_unlock_irqrestore(&hvcsd->lock, flags); - return -ENODEV; - } - - unit_address = hvcsd->vdev->unit_address; - - while (count > 0) { - tosend = min(count, (HVCS_BUFF_LEN - hvcsd->chars_in_buffer)); - /* - * No more space, this probably means that the last call to - * hvcs_write() didn't succeed and the buffer was filled up. - */ - if (!tosend) - break; - - memcpy(&hvcsd->buffer[hvcsd->chars_in_buffer], - &charbuf[total_sent], - tosend); - - hvcsd->chars_in_buffer += tosend; - - result = 0; - - /* - * If this is true then we don't want to try writing to the - * hypervisor because that is the kernel_threads job now. We'll - * just add to the buffer. - */ - if (!(hvcsd->todo_mask & HVCS_TRY_WRITE)) - /* won't send partial writes */ - result = hvc_put_chars(unit_address, - &hvcsd->buffer[0], - hvcsd->chars_in_buffer); - - /* - * Since we know we have enough room in hvcsd->buffer for - * tosend we record that it was sent regardless of whether the - * hypervisor actually took it because we have it buffered. - */ - total_sent+=tosend; - count-=tosend; - if (result == 0) { - hvcsd->todo_mask |= HVCS_TRY_WRITE; - hvcs_kick(); - break; - } - - hvcsd->chars_in_buffer = 0; - /* - * Test after the chars_in_buffer reset otherwise this could - * deadlock our writes if hvc_put_chars fails. - */ - if (result < 0) - break; - } - - spin_unlock_irqrestore(&hvcsd->lock, flags); - - if (result == -1) - return -EIO; - else - return total_sent; -} - -/* - * This is really asking how much can we guarentee that we can send or that we - * absolutely WILL BUFFER if we can't send it. This driver MUST honor the - * return value, hence the reason for hvcs_struct buffering. - */ -static int hvcs_write_room(struct tty_struct *tty) -{ - struct hvcs_struct *hvcsd = tty->driver_data; - - if (!hvcsd || hvcsd->open_count <= 0) - return 0; - - return HVCS_BUFF_LEN - hvcsd->chars_in_buffer; -} - -static int hvcs_chars_in_buffer(struct tty_struct *tty) -{ - struct hvcs_struct *hvcsd = tty->driver_data; - - return hvcsd->chars_in_buffer; -} - -static const struct tty_operations hvcs_ops = { - .open = hvcs_open, - .close = hvcs_close, - .hangup = hvcs_hangup, - .write = hvcs_write, - .write_room = hvcs_write_room, - .chars_in_buffer = hvcs_chars_in_buffer, - .unthrottle = hvcs_unthrottle, - .throttle = hvcs_throttle, -}; - -static int hvcs_alloc_index_list(int n) -{ - int i; - - hvcs_index_list = kmalloc(n * sizeof(hvcs_index_count),GFP_KERNEL); - if (!hvcs_index_list) - return -ENOMEM; - hvcs_index_count = n; - for (i = 0; i < hvcs_index_count; i++) - hvcs_index_list[i] = -1; - return 0; -} - -static void hvcs_free_index_list(void) -{ - /* Paranoia check to be thorough. */ - kfree(hvcs_index_list); - hvcs_index_list = NULL; - hvcs_index_count = 0; -} - -static int __init hvcs_module_init(void) -{ - int rc; - int num_ttys_to_alloc; - - printk(KERN_INFO "Initializing %s\n", hvcs_driver_string); - - /* Has the user specified an overload with an insmod param? */ - if (hvcs_parm_num_devs <= 0 || - (hvcs_parm_num_devs > HVCS_MAX_SERVER_ADAPTERS)) { - num_ttys_to_alloc = HVCS_DEFAULT_SERVER_ADAPTERS; - } else - num_ttys_to_alloc = hvcs_parm_num_devs; - - hvcs_tty_driver = alloc_tty_driver(num_ttys_to_alloc); - if (!hvcs_tty_driver) - return -ENOMEM; - - if (hvcs_alloc_index_list(num_ttys_to_alloc)) { - rc = -ENOMEM; - goto index_fail; - } - - hvcs_tty_driver->owner = THIS_MODULE; - - hvcs_tty_driver->driver_name = hvcs_driver_name; - hvcs_tty_driver->name = hvcs_device_node; - - /* - * We'll let the system assign us a major number, indicated by leaving - * it blank. - */ - - hvcs_tty_driver->minor_start = HVCS_MINOR_START; - hvcs_tty_driver->type = TTY_DRIVER_TYPE_SYSTEM; - - /* - * We role our own so that we DONT ECHO. We can't echo because the - * device we are connecting to already echoes by default and this would - * throw us into a horrible recursive echo-echo-echo loop. - */ - hvcs_tty_driver->init_termios = hvcs_tty_termios; - hvcs_tty_driver->flags = TTY_DRIVER_REAL_RAW; - - tty_set_operations(hvcs_tty_driver, &hvcs_ops); - - /* - * The following call will result in sysfs entries that denote the - * dynamically assigned major and minor numbers for our devices. - */ - if (tty_register_driver(hvcs_tty_driver)) { - printk(KERN_ERR "HVCS: registration as a tty driver failed.\n"); - rc = -EIO; - goto register_fail; - } - - hvcs_pi_buff = kmalloc(PAGE_SIZE, GFP_KERNEL); - if (!hvcs_pi_buff) { - rc = -ENOMEM; - goto buff_alloc_fail; - } - - hvcs_task = kthread_run(khvcsd, NULL, "khvcsd"); - if (IS_ERR(hvcs_task)) { - printk(KERN_ERR "HVCS: khvcsd creation failed. Driver not loaded.\n"); - rc = -EIO; - goto kthread_fail; - } - - rc = vio_register_driver(&hvcs_vio_driver); - if (rc) { - printk(KERN_ERR "HVCS: can't register vio driver\n"); - goto vio_fail; - } - - /* - * This needs to be done AFTER the vio_register_driver() call or else - * the kobjects won't be initialized properly. - */ - rc = driver_create_file(&(hvcs_vio_driver.driver), &driver_attr_rescan); - if (rc) { - printk(KERN_ERR "HVCS: sysfs attr create failed\n"); - goto attr_fail; - } - - printk(KERN_INFO "HVCS: driver module inserted.\n"); - - return 0; - -attr_fail: - vio_unregister_driver(&hvcs_vio_driver); -vio_fail: - kthread_stop(hvcs_task); -kthread_fail: - kfree(hvcs_pi_buff); -buff_alloc_fail: - tty_unregister_driver(hvcs_tty_driver); -register_fail: - hvcs_free_index_list(); -index_fail: - put_tty_driver(hvcs_tty_driver); - hvcs_tty_driver = NULL; - return rc; -} - -static void __exit hvcs_module_exit(void) -{ - /* - * This driver receives hvcs_remove callbacks for each device upon - * module removal. - */ - - /* - * This synchronous operation will wake the khvcsd kthread if it is - * asleep and will return when khvcsd has terminated. - */ - kthread_stop(hvcs_task); - - spin_lock(&hvcs_pi_lock); - kfree(hvcs_pi_buff); - hvcs_pi_buff = NULL; - spin_unlock(&hvcs_pi_lock); - - driver_remove_file(&hvcs_vio_driver.driver, &driver_attr_rescan); - - vio_unregister_driver(&hvcs_vio_driver); - - tty_unregister_driver(hvcs_tty_driver); - - hvcs_free_index_list(); - - put_tty_driver(hvcs_tty_driver); - - printk(KERN_INFO "HVCS: driver module removed.\n"); -} - -module_init(hvcs_module_init); -module_exit(hvcs_module_exit); diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c deleted file mode 100644 index 67a75a502c01..000000000000 --- a/drivers/char/hvsi.c +++ /dev/null @@ -1,1314 +0,0 @@ -/* - * Copyright (C) 2004 Hollis Blanchard , IBM - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* Host Virtual Serial Interface (HVSI) is a protocol between the hosted OS - * and the service processor on IBM pSeries servers. On these servers, there - * are no serial ports under the OS's control, and sometimes there is no other - * console available either. However, the service processor has two standard - * serial ports, so this over-complicated protocol allows the OS to control - * those ports by proxy. - * - * Besides data, the procotol supports the reading/writing of the serial - * port's DTR line, and the reading of the CD line. This is to allow the OS to - * control a modem attached to the service processor's serial port. Note that - * the OS cannot change the speed of the port through this protocol. - */ - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define HVSI_MAJOR 229 -#define HVSI_MINOR 128 -#define MAX_NR_HVSI_CONSOLES 4 - -#define HVSI_TIMEOUT (5*HZ) -#define HVSI_VERSION 1 -#define HVSI_MAX_PACKET 256 -#define HVSI_MAX_READ 16 -#define HVSI_MAX_OUTGOING_DATA 12 -#define N_OUTBUF 12 - -/* - * we pass data via two 8-byte registers, so we would like our char arrays - * properly aligned for those loads. - */ -#define __ALIGNED__ __attribute__((__aligned__(sizeof(long)))) - -struct hvsi_struct { - struct delayed_work writer; - struct work_struct handshaker; - wait_queue_head_t emptyq; /* woken when outbuf is emptied */ - wait_queue_head_t stateq; /* woken when HVSI state changes */ - spinlock_t lock; - int index; - struct tty_struct *tty; - int count; - uint8_t throttle_buf[128]; - uint8_t outbuf[N_OUTBUF]; /* to implement write_room and chars_in_buffer */ - /* inbuf is for packet reassembly. leave a little room for leftovers. */ - uint8_t inbuf[HVSI_MAX_PACKET + HVSI_MAX_READ]; - uint8_t *inbuf_end; - int n_throttle; - int n_outbuf; - uint32_t vtermno; - uint32_t virq; - atomic_t seqno; /* HVSI packet sequence number */ - uint16_t mctrl; - uint8_t state; /* HVSI protocol state */ - uint8_t flags; -#ifdef CONFIG_MAGIC_SYSRQ - uint8_t sysrq; -#endif /* CONFIG_MAGIC_SYSRQ */ -}; -static struct hvsi_struct hvsi_ports[MAX_NR_HVSI_CONSOLES]; - -static struct tty_driver *hvsi_driver; -static int hvsi_count; -static int (*hvsi_wait)(struct hvsi_struct *hp, int state); - -enum HVSI_PROTOCOL_STATE { - HVSI_CLOSED, - HVSI_WAIT_FOR_VER_RESPONSE, - HVSI_WAIT_FOR_VER_QUERY, - HVSI_OPEN, - HVSI_WAIT_FOR_MCTRL_RESPONSE, - HVSI_FSP_DIED, -}; -#define HVSI_CONSOLE 0x1 - -#define VS_DATA_PACKET_HEADER 0xff -#define VS_CONTROL_PACKET_HEADER 0xfe -#define VS_QUERY_PACKET_HEADER 0xfd -#define VS_QUERY_RESPONSE_PACKET_HEADER 0xfc - -/* control verbs */ -#define VSV_SET_MODEM_CTL 1 /* to service processor only */ -#define VSV_MODEM_CTL_UPDATE 2 /* from service processor only */ -#define VSV_CLOSE_PROTOCOL 3 - -/* query verbs */ -#define VSV_SEND_VERSION_NUMBER 1 -#define VSV_SEND_MODEM_CTL_STATUS 2 - -/* yes, these masks are not consecutive. */ -#define HVSI_TSDTR 0x01 -#define HVSI_TSCD 0x20 - -struct hvsi_header { - uint8_t type; - uint8_t len; - uint16_t seqno; -} __attribute__((packed)); - -struct hvsi_data { - uint8_t type; - uint8_t len; - uint16_t seqno; - uint8_t data[HVSI_MAX_OUTGOING_DATA]; -} __attribute__((packed)); - -struct hvsi_control { - uint8_t type; - uint8_t len; - uint16_t seqno; - uint16_t verb; - /* optional depending on verb: */ - uint32_t word; - uint32_t mask; -} __attribute__((packed)); - -struct hvsi_query { - uint8_t type; - uint8_t len; - uint16_t seqno; - uint16_t verb; -} __attribute__((packed)); - -struct hvsi_query_response { - uint8_t type; - uint8_t len; - uint16_t seqno; - uint16_t verb; - uint16_t query_seqno; - union { - uint8_t version; - uint32_t mctrl_word; - } u; -} __attribute__((packed)); - - - -static inline int is_console(struct hvsi_struct *hp) -{ - return hp->flags & HVSI_CONSOLE; -} - -static inline int is_open(struct hvsi_struct *hp) -{ - /* if we're waiting for an mctrl then we're already open */ - return (hp->state == HVSI_OPEN) - || (hp->state == HVSI_WAIT_FOR_MCTRL_RESPONSE); -} - -static inline void print_state(struct hvsi_struct *hp) -{ -#ifdef DEBUG - static const char *state_names[] = { - "HVSI_CLOSED", - "HVSI_WAIT_FOR_VER_RESPONSE", - "HVSI_WAIT_FOR_VER_QUERY", - "HVSI_OPEN", - "HVSI_WAIT_FOR_MCTRL_RESPONSE", - "HVSI_FSP_DIED", - }; - const char *name = (hp->state < ARRAY_SIZE(state_names)) - ? state_names[hp->state] : "UNKNOWN"; - - pr_debug("hvsi%i: state = %s\n", hp->index, name); -#endif /* DEBUG */ -} - -static inline void __set_state(struct hvsi_struct *hp, int state) -{ - hp->state = state; - print_state(hp); - wake_up_all(&hp->stateq); -} - -static inline void set_state(struct hvsi_struct *hp, int state) -{ - unsigned long flags; - - spin_lock_irqsave(&hp->lock, flags); - __set_state(hp, state); - spin_unlock_irqrestore(&hp->lock, flags); -} - -static inline int len_packet(const uint8_t *packet) -{ - return (int)((struct hvsi_header *)packet)->len; -} - -static inline int is_header(const uint8_t *packet) -{ - struct hvsi_header *header = (struct hvsi_header *)packet; - return header->type >= VS_QUERY_RESPONSE_PACKET_HEADER; -} - -static inline int got_packet(const struct hvsi_struct *hp, uint8_t *packet) -{ - if (hp->inbuf_end < packet + sizeof(struct hvsi_header)) - return 0; /* don't even have the packet header */ - - if (hp->inbuf_end < (packet + len_packet(packet))) - return 0; /* don't have the rest of the packet */ - - return 1; -} - -/* shift remaining bytes in packetbuf down */ -static void compact_inbuf(struct hvsi_struct *hp, uint8_t *read_to) -{ - int remaining = (int)(hp->inbuf_end - read_to); - - pr_debug("%s: %i chars remain\n", __func__, remaining); - - if (read_to != hp->inbuf) - memmove(hp->inbuf, read_to, remaining); - - hp->inbuf_end = hp->inbuf + remaining; -} - -#ifdef DEBUG -#define dbg_dump_packet(packet) dump_packet(packet) -#define dbg_dump_hex(data, len) dump_hex(data, len) -#else -#define dbg_dump_packet(packet) do { } while (0) -#define dbg_dump_hex(data, len) do { } while (0) -#endif - -static void dump_hex(const uint8_t *data, int len) -{ - int i; - - printk(" "); - for (i=0; i < len; i++) - printk("%.2x", data[i]); - - printk("\n "); - for (i=0; i < len; i++) { - if (isprint(data[i])) - printk("%c", data[i]); - else - printk("."); - } - printk("\n"); -} - -static void dump_packet(uint8_t *packet) -{ - struct hvsi_header *header = (struct hvsi_header *)packet; - - printk("type 0x%x, len %i, seqno %i:\n", header->type, header->len, - header->seqno); - - dump_hex(packet, header->len); -} - -static int hvsi_read(struct hvsi_struct *hp, char *buf, int count) -{ - unsigned long got; - - got = hvc_get_chars(hp->vtermno, buf, count); - - return got; -} - -static void hvsi_recv_control(struct hvsi_struct *hp, uint8_t *packet, - struct tty_struct **to_hangup, struct hvsi_struct **to_handshake) -{ - struct hvsi_control *header = (struct hvsi_control *)packet; - - switch (header->verb) { - case VSV_MODEM_CTL_UPDATE: - if ((header->word & HVSI_TSCD) == 0) { - /* CD went away; no more connection */ - pr_debug("hvsi%i: CD dropped\n", hp->index); - hp->mctrl &= TIOCM_CD; - /* If userland hasn't done an open(2) yet, hp->tty is NULL. */ - if (hp->tty && !(hp->tty->flags & CLOCAL)) - *to_hangup = hp->tty; - } - break; - case VSV_CLOSE_PROTOCOL: - pr_debug("hvsi%i: service processor came back\n", hp->index); - if (hp->state != HVSI_CLOSED) { - *to_handshake = hp; - } - break; - default: - printk(KERN_WARNING "hvsi%i: unknown HVSI control packet: ", - hp->index); - dump_packet(packet); - break; - } -} - -static void hvsi_recv_response(struct hvsi_struct *hp, uint8_t *packet) -{ - struct hvsi_query_response *resp = (struct hvsi_query_response *)packet; - - switch (hp->state) { - case HVSI_WAIT_FOR_VER_RESPONSE: - __set_state(hp, HVSI_WAIT_FOR_VER_QUERY); - break; - case HVSI_WAIT_FOR_MCTRL_RESPONSE: - hp->mctrl = 0; - if (resp->u.mctrl_word & HVSI_TSDTR) - hp->mctrl |= TIOCM_DTR; - if (resp->u.mctrl_word & HVSI_TSCD) - hp->mctrl |= TIOCM_CD; - __set_state(hp, HVSI_OPEN); - break; - default: - printk(KERN_ERR "hvsi%i: unexpected query response: ", hp->index); - dump_packet(packet); - break; - } -} - -/* respond to service processor's version query */ -static int hvsi_version_respond(struct hvsi_struct *hp, uint16_t query_seqno) -{ - struct hvsi_query_response packet __ALIGNED__; - int wrote; - - packet.type = VS_QUERY_RESPONSE_PACKET_HEADER; - packet.len = sizeof(struct hvsi_query_response); - packet.seqno = atomic_inc_return(&hp->seqno); - packet.verb = VSV_SEND_VERSION_NUMBER; - packet.u.version = HVSI_VERSION; - packet.query_seqno = query_seqno+1; - - pr_debug("%s: sending %i bytes\n", __func__, packet.len); - dbg_dump_hex((uint8_t*)&packet, packet.len); - - wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len); - if (wrote != packet.len) { - printk(KERN_ERR "hvsi%i: couldn't send query response!\n", - hp->index); - return -EIO; - } - - return 0; -} - -static void hvsi_recv_query(struct hvsi_struct *hp, uint8_t *packet) -{ - struct hvsi_query *query = (struct hvsi_query *)packet; - - switch (hp->state) { - case HVSI_WAIT_FOR_VER_QUERY: - hvsi_version_respond(hp, query->seqno); - __set_state(hp, HVSI_OPEN); - break; - default: - printk(KERN_ERR "hvsi%i: unexpected query: ", hp->index); - dump_packet(packet); - break; - } -} - -static void hvsi_insert_chars(struct hvsi_struct *hp, const char *buf, int len) -{ - int i; - - for (i=0; i < len; i++) { - char c = buf[i]; -#ifdef CONFIG_MAGIC_SYSRQ - if (c == '\0') { - hp->sysrq = 1; - continue; - } else if (hp->sysrq) { - handle_sysrq(c); - hp->sysrq = 0; - continue; - } -#endif /* CONFIG_MAGIC_SYSRQ */ - tty_insert_flip_char(hp->tty, c, 0); - } -} - -/* - * We could get 252 bytes of data at once here. But the tty layer only - * throttles us at TTY_THRESHOLD_THROTTLE (128) bytes, so we could overflow - * it. Accordingly we won't send more than 128 bytes at a time to the flip - * buffer, which will give the tty buffer a chance to throttle us. Should the - * value of TTY_THRESHOLD_THROTTLE change in n_tty.c, this code should be - * revisited. - */ -#define TTY_THRESHOLD_THROTTLE 128 -static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp, - const uint8_t *packet) -{ - const struct hvsi_header *header = (const struct hvsi_header *)packet; - const uint8_t *data = packet + sizeof(struct hvsi_header); - int datalen = header->len - sizeof(struct hvsi_header); - int overflow = datalen - TTY_THRESHOLD_THROTTLE; - - pr_debug("queueing %i chars '%.*s'\n", datalen, datalen, data); - - if (datalen == 0) - return NULL; - - if (overflow > 0) { - pr_debug("%s: got >TTY_THRESHOLD_THROTTLE bytes\n", __func__); - datalen = TTY_THRESHOLD_THROTTLE; - } - - hvsi_insert_chars(hp, data, datalen); - - if (overflow > 0) { - /* - * we still have more data to deliver, so we need to save off the - * overflow and send it later - */ - pr_debug("%s: deferring overflow\n", __func__); - memcpy(hp->throttle_buf, data + TTY_THRESHOLD_THROTTLE, overflow); - hp->n_throttle = overflow; - } - - return hp->tty; -} - -/* - * Returns true/false indicating data successfully read from hypervisor. - * Used both to get packets for tty connections and to advance the state - * machine during console handshaking (in which case tty = NULL and we ignore - * incoming data). - */ -static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip, - struct tty_struct **hangup, struct hvsi_struct **handshake) -{ - uint8_t *packet = hp->inbuf; - int chunklen; - - *flip = NULL; - *hangup = NULL; - *handshake = NULL; - - chunklen = hvsi_read(hp, hp->inbuf_end, HVSI_MAX_READ); - if (chunklen == 0) { - pr_debug("%s: 0-length read\n", __func__); - return 0; - } - - pr_debug("%s: got %i bytes\n", __func__, chunklen); - dbg_dump_hex(hp->inbuf_end, chunklen); - - hp->inbuf_end += chunklen; - - /* handle all completed packets */ - while ((packet < hp->inbuf_end) && got_packet(hp, packet)) { - struct hvsi_header *header = (struct hvsi_header *)packet; - - if (!is_header(packet)) { - printk(KERN_ERR "hvsi%i: got malformed packet\n", hp->index); - /* skip bytes until we find a header or run out of data */ - while ((packet < hp->inbuf_end) && (!is_header(packet))) - packet++; - continue; - } - - pr_debug("%s: handling %i-byte packet\n", __func__, - len_packet(packet)); - dbg_dump_packet(packet); - - switch (header->type) { - case VS_DATA_PACKET_HEADER: - if (!is_open(hp)) - break; - if (hp->tty == NULL) - break; /* no tty buffer to put data in */ - *flip = hvsi_recv_data(hp, packet); - break; - case VS_CONTROL_PACKET_HEADER: - hvsi_recv_control(hp, packet, hangup, handshake); - break; - case VS_QUERY_RESPONSE_PACKET_HEADER: - hvsi_recv_response(hp, packet); - break; - case VS_QUERY_PACKET_HEADER: - hvsi_recv_query(hp, packet); - break; - default: - printk(KERN_ERR "hvsi%i: unknown HVSI packet type 0x%x\n", - hp->index, header->type); - dump_packet(packet); - break; - } - - packet += len_packet(packet); - - if (*hangup || *handshake) { - pr_debug("%s: hangup or handshake\n", __func__); - /* - * we need to send the hangup now before receiving any more data. - * If we get "data, hangup, data", we can't deliver the second - * data before the hangup. - */ - break; - } - } - - compact_inbuf(hp, packet); - - return 1; -} - -static void hvsi_send_overflow(struct hvsi_struct *hp) -{ - pr_debug("%s: delivering %i bytes overflow\n", __func__, - hp->n_throttle); - - hvsi_insert_chars(hp, hp->throttle_buf, hp->n_throttle); - hp->n_throttle = 0; -} - -/* - * must get all pending data because we only get an irq on empty->non-empty - * transition - */ -static irqreturn_t hvsi_interrupt(int irq, void *arg) -{ - struct hvsi_struct *hp = (struct hvsi_struct *)arg; - struct tty_struct *flip; - struct tty_struct *hangup; - struct hvsi_struct *handshake; - unsigned long flags; - int again = 1; - - pr_debug("%s\n", __func__); - - while (again) { - spin_lock_irqsave(&hp->lock, flags); - again = hvsi_load_chunk(hp, &flip, &hangup, &handshake); - spin_unlock_irqrestore(&hp->lock, flags); - - /* - * we have to call tty_flip_buffer_push() and tty_hangup() outside our - * spinlock. But we also have to keep going until we've read all the - * available data. - */ - - if (flip) { - /* there was data put in the tty flip buffer */ - tty_flip_buffer_push(flip); - flip = NULL; - } - - if (hangup) { - tty_hangup(hangup); - } - - if (handshake) { - pr_debug("hvsi%i: attempting re-handshake\n", handshake->index); - schedule_work(&handshake->handshaker); - } - } - - spin_lock_irqsave(&hp->lock, flags); - if (hp->tty && hp->n_throttle - && (!test_bit(TTY_THROTTLED, &hp->tty->flags))) { - /* we weren't hung up and we weren't throttled, so we can deliver the - * rest now */ - flip = hp->tty; - hvsi_send_overflow(hp); - } - spin_unlock_irqrestore(&hp->lock, flags); - - if (flip) { - tty_flip_buffer_push(flip); - } - - return IRQ_HANDLED; -} - -/* for boot console, before the irq handler is running */ -static int __init poll_for_state(struct hvsi_struct *hp, int state) -{ - unsigned long end_jiffies = jiffies + HVSI_TIMEOUT; - - for (;;) { - hvsi_interrupt(hp->virq, (void *)hp); /* get pending data */ - - if (hp->state == state) - return 0; - - mdelay(5); - if (time_after(jiffies, end_jiffies)) - return -EIO; - } -} - -/* wait for irq handler to change our state */ -static int wait_for_state(struct hvsi_struct *hp, int state) -{ - int ret = 0; - - if (!wait_event_timeout(hp->stateq, (hp->state == state), HVSI_TIMEOUT)) - ret = -EIO; - - return ret; -} - -static int hvsi_query(struct hvsi_struct *hp, uint16_t verb) -{ - struct hvsi_query packet __ALIGNED__; - int wrote; - - packet.type = VS_QUERY_PACKET_HEADER; - packet.len = sizeof(struct hvsi_query); - packet.seqno = atomic_inc_return(&hp->seqno); - packet.verb = verb; - - pr_debug("%s: sending %i bytes\n", __func__, packet.len); - dbg_dump_hex((uint8_t*)&packet, packet.len); - - wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len); - if (wrote != packet.len) { - printk(KERN_ERR "hvsi%i: couldn't send query (%i)!\n", hp->index, - wrote); - return -EIO; - } - - return 0; -} - -static int hvsi_get_mctrl(struct hvsi_struct *hp) -{ - int ret; - - set_state(hp, HVSI_WAIT_FOR_MCTRL_RESPONSE); - hvsi_query(hp, VSV_SEND_MODEM_CTL_STATUS); - - ret = hvsi_wait(hp, HVSI_OPEN); - if (ret < 0) { - printk(KERN_ERR "hvsi%i: didn't get modem flags\n", hp->index); - set_state(hp, HVSI_OPEN); - return ret; - } - - pr_debug("%s: mctrl 0x%x\n", __func__, hp->mctrl); - - return 0; -} - -/* note that we can only set DTR */ -static int hvsi_set_mctrl(struct hvsi_struct *hp, uint16_t mctrl) -{ - struct hvsi_control packet __ALIGNED__; - int wrote; - - packet.type = VS_CONTROL_PACKET_HEADER, - packet.seqno = atomic_inc_return(&hp->seqno); - packet.len = sizeof(struct hvsi_control); - packet.verb = VSV_SET_MODEM_CTL; - packet.mask = HVSI_TSDTR; - - if (mctrl & TIOCM_DTR) - packet.word = HVSI_TSDTR; - - pr_debug("%s: sending %i bytes\n", __func__, packet.len); - dbg_dump_hex((uint8_t*)&packet, packet.len); - - wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len); - if (wrote != packet.len) { - printk(KERN_ERR "hvsi%i: couldn't set DTR!\n", hp->index); - return -EIO; - } - - return 0; -} - -static void hvsi_drain_input(struct hvsi_struct *hp) -{ - uint8_t buf[HVSI_MAX_READ] __ALIGNED__; - unsigned long end_jiffies = jiffies + HVSI_TIMEOUT; - - while (time_before(end_jiffies, jiffies)) - if (0 == hvsi_read(hp, buf, HVSI_MAX_READ)) - break; -} - -static int hvsi_handshake(struct hvsi_struct *hp) -{ - int ret; - - /* - * We could have a CLOSE or other data waiting for us before we even try - * to open; try to throw it all away so we don't get confused. (CLOSE - * is the first message sent up the pipe when the FSP comes online. We - * need to distinguish between "it came up a while ago and we're the first - * user" and "it was just reset before it saw our handshake packet".) - */ - hvsi_drain_input(hp); - - set_state(hp, HVSI_WAIT_FOR_VER_RESPONSE); - ret = hvsi_query(hp, VSV_SEND_VERSION_NUMBER); - if (ret < 0) { - printk(KERN_ERR "hvsi%i: couldn't send version query\n", hp->index); - return ret; - } - - ret = hvsi_wait(hp, HVSI_OPEN); - if (ret < 0) - return ret; - - return 0; -} - -static void hvsi_handshaker(struct work_struct *work) -{ - struct hvsi_struct *hp = - container_of(work, struct hvsi_struct, handshaker); - - if (hvsi_handshake(hp) >= 0) - return; - - printk(KERN_ERR "hvsi%i: re-handshaking failed\n", hp->index); - if (is_console(hp)) { - /* - * ttys will re-attempt the handshake via hvsi_open, but - * the console will not. - */ - printk(KERN_ERR "hvsi%i: lost console!\n", hp->index); - } -} - -static int hvsi_put_chars(struct hvsi_struct *hp, const char *buf, int count) -{ - struct hvsi_data packet __ALIGNED__; - int ret; - - BUG_ON(count > HVSI_MAX_OUTGOING_DATA); - - packet.type = VS_DATA_PACKET_HEADER; - packet.seqno = atomic_inc_return(&hp->seqno); - packet.len = count + sizeof(struct hvsi_header); - memcpy(&packet.data, buf, count); - - ret = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len); - if (ret == packet.len) { - /* return the number of chars written, not the packet length */ - return count; - } - return ret; /* return any errors */ -} - -static void hvsi_close_protocol(struct hvsi_struct *hp) -{ - struct hvsi_control packet __ALIGNED__; - - packet.type = VS_CONTROL_PACKET_HEADER; - packet.seqno = atomic_inc_return(&hp->seqno); - packet.len = 6; - packet.verb = VSV_CLOSE_PROTOCOL; - - pr_debug("%s: sending %i bytes\n", __func__, packet.len); - dbg_dump_hex((uint8_t*)&packet, packet.len); - - hvc_put_chars(hp->vtermno, (char *)&packet, packet.len); -} - -static int hvsi_open(struct tty_struct *tty, struct file *filp) -{ - struct hvsi_struct *hp; - unsigned long flags; - int line = tty->index; - int ret; - - pr_debug("%s\n", __func__); - - if (line < 0 || line >= hvsi_count) - return -ENODEV; - hp = &hvsi_ports[line]; - - tty->driver_data = hp; - - mb(); - if (hp->state == HVSI_FSP_DIED) - return -EIO; - - spin_lock_irqsave(&hp->lock, flags); - hp->tty = tty; - hp->count++; - atomic_set(&hp->seqno, 0); - h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE); - spin_unlock_irqrestore(&hp->lock, flags); - - if (is_console(hp)) - return 0; /* this has already been handshaked as the console */ - - ret = hvsi_handshake(hp); - if (ret < 0) { - printk(KERN_ERR "%s: HVSI handshaking failed\n", tty->name); - return ret; - } - - ret = hvsi_get_mctrl(hp); - if (ret < 0) { - printk(KERN_ERR "%s: couldn't get initial modem flags\n", tty->name); - return ret; - } - - ret = hvsi_set_mctrl(hp, hp->mctrl | TIOCM_DTR); - if (ret < 0) { - printk(KERN_ERR "%s: couldn't set DTR\n", tty->name); - return ret; - } - - return 0; -} - -/* wait for hvsi_write_worker to empty hp->outbuf */ -static void hvsi_flush_output(struct hvsi_struct *hp) -{ - wait_event_timeout(hp->emptyq, (hp->n_outbuf <= 0), HVSI_TIMEOUT); - - /* 'writer' could still be pending if it didn't see n_outbuf = 0 yet */ - cancel_delayed_work_sync(&hp->writer); - flush_work_sync(&hp->handshaker); - - /* - * it's also possible that our timeout expired and hvsi_write_worker - * didn't manage to push outbuf. poof. - */ - hp->n_outbuf = 0; -} - -static void hvsi_close(struct tty_struct *tty, struct file *filp) -{ - struct hvsi_struct *hp = tty->driver_data; - unsigned long flags; - - pr_debug("%s\n", __func__); - - if (tty_hung_up_p(filp)) - return; - - spin_lock_irqsave(&hp->lock, flags); - - if (--hp->count == 0) { - hp->tty = NULL; - hp->inbuf_end = hp->inbuf; /* discard remaining partial packets */ - - /* only close down connection if it is not the console */ - if (!is_console(hp)) { - h_vio_signal(hp->vtermno, VIO_IRQ_DISABLE); /* no more irqs */ - __set_state(hp, HVSI_CLOSED); - /* - * any data delivered to the tty layer after this will be - * discarded (except for XON/XOFF) - */ - tty->closing = 1; - - spin_unlock_irqrestore(&hp->lock, flags); - - /* let any existing irq handlers finish. no more will start. */ - synchronize_irq(hp->virq); - - /* hvsi_write_worker will re-schedule until outbuf is empty. */ - hvsi_flush_output(hp); - - /* tell FSP to stop sending data */ - hvsi_close_protocol(hp); - - /* - * drain anything FSP is still in the middle of sending, and let - * hvsi_handshake drain the rest on the next open. - */ - hvsi_drain_input(hp); - - spin_lock_irqsave(&hp->lock, flags); - } - } else if (hp->count < 0) - printk(KERN_ERR "hvsi_close %lu: oops, count is %d\n", - hp - hvsi_ports, hp->count); - - spin_unlock_irqrestore(&hp->lock, flags); -} - -static void hvsi_hangup(struct tty_struct *tty) -{ - struct hvsi_struct *hp = tty->driver_data; - unsigned long flags; - - pr_debug("%s\n", __func__); - - spin_lock_irqsave(&hp->lock, flags); - - hp->count = 0; - hp->n_outbuf = 0; - hp->tty = NULL; - - spin_unlock_irqrestore(&hp->lock, flags); -} - -/* called with hp->lock held */ -static void hvsi_push(struct hvsi_struct *hp) -{ - int n; - - if (hp->n_outbuf <= 0) - return; - - n = hvsi_put_chars(hp, hp->outbuf, hp->n_outbuf); - if (n > 0) { - /* success */ - pr_debug("%s: wrote %i chars\n", __func__, n); - hp->n_outbuf = 0; - } else if (n == -EIO) { - __set_state(hp, HVSI_FSP_DIED); - printk(KERN_ERR "hvsi%i: service processor died\n", hp->index); - } -} - -/* hvsi_write_worker will keep rescheduling itself until outbuf is empty */ -static void hvsi_write_worker(struct work_struct *work) -{ - struct hvsi_struct *hp = - container_of(work, struct hvsi_struct, writer.work); - unsigned long flags; -#ifdef DEBUG - static long start_j = 0; - - if (start_j == 0) - start_j = jiffies; -#endif /* DEBUG */ - - spin_lock_irqsave(&hp->lock, flags); - - pr_debug("%s: %i chars in buffer\n", __func__, hp->n_outbuf); - - if (!is_open(hp)) { - /* - * We could have a non-open connection if the service processor died - * while we were busily scheduling ourselves. In that case, it could - * be minutes before the service processor comes back, so only try - * again once a second. - */ - schedule_delayed_work(&hp->writer, HZ); - goto out; - } - - hvsi_push(hp); - if (hp->n_outbuf > 0) - schedule_delayed_work(&hp->writer, 10); - else { -#ifdef DEBUG - pr_debug("%s: outbuf emptied after %li jiffies\n", __func__, - jiffies - start_j); - start_j = 0; -#endif /* DEBUG */ - wake_up_all(&hp->emptyq); - tty_wakeup(hp->tty); - } - -out: - spin_unlock_irqrestore(&hp->lock, flags); -} - -static int hvsi_write_room(struct tty_struct *tty) -{ - struct hvsi_struct *hp = tty->driver_data; - - return N_OUTBUF - hp->n_outbuf; -} - -static int hvsi_chars_in_buffer(struct tty_struct *tty) -{ - struct hvsi_struct *hp = tty->driver_data; - - return hp->n_outbuf; -} - -static int hvsi_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - struct hvsi_struct *hp = tty->driver_data; - const char *source = buf; - unsigned long flags; - int total = 0; - int origcount = count; - - spin_lock_irqsave(&hp->lock, flags); - - pr_debug("%s: %i chars in buffer\n", __func__, hp->n_outbuf); - - if (!is_open(hp)) { - /* we're either closing or not yet open; don't accept data */ - pr_debug("%s: not open\n", __func__); - goto out; - } - - /* - * when the hypervisor buffer (16K) fills, data will stay in hp->outbuf - * and hvsi_write_worker will be scheduled. subsequent hvsi_write() calls - * will see there is no room in outbuf and return. - */ - while ((count > 0) && (hvsi_write_room(hp->tty) > 0)) { - int chunksize = min(count, hvsi_write_room(hp->tty)); - - BUG_ON(hp->n_outbuf < 0); - memcpy(hp->outbuf + hp->n_outbuf, source, chunksize); - hp->n_outbuf += chunksize; - - total += chunksize; - source += chunksize; - count -= chunksize; - hvsi_push(hp); - } - - if (hp->n_outbuf > 0) { - /* - * we weren't able to write it all to the hypervisor. - * schedule another push attempt. - */ - schedule_delayed_work(&hp->writer, 10); - } - -out: - spin_unlock_irqrestore(&hp->lock, flags); - - if (total != origcount) - pr_debug("%s: wanted %i, only wrote %i\n", __func__, origcount, - total); - - return total; -} - -/* - * I have never seen throttle or unthrottle called, so this little throttle - * buffering scheme may or may not work. - */ -static void hvsi_throttle(struct tty_struct *tty) -{ - struct hvsi_struct *hp = tty->driver_data; - - pr_debug("%s\n", __func__); - - h_vio_signal(hp->vtermno, VIO_IRQ_DISABLE); -} - -static void hvsi_unthrottle(struct tty_struct *tty) -{ - struct hvsi_struct *hp = tty->driver_data; - unsigned long flags; - int shouldflip = 0; - - pr_debug("%s\n", __func__); - - spin_lock_irqsave(&hp->lock, flags); - if (hp->n_throttle) { - hvsi_send_overflow(hp); - shouldflip = 1; - } - spin_unlock_irqrestore(&hp->lock, flags); - - if (shouldflip) - tty_flip_buffer_push(hp->tty); - - h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE); -} - -static int hvsi_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct hvsi_struct *hp = tty->driver_data; - - hvsi_get_mctrl(hp); - return hp->mctrl; -} - -static int hvsi_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct hvsi_struct *hp = tty->driver_data; - unsigned long flags; - uint16_t new_mctrl; - - /* we can only alter DTR */ - clear &= TIOCM_DTR; - set &= TIOCM_DTR; - - spin_lock_irqsave(&hp->lock, flags); - - new_mctrl = (hp->mctrl & ~clear) | set; - - if (hp->mctrl != new_mctrl) { - hvsi_set_mctrl(hp, new_mctrl); - hp->mctrl = new_mctrl; - } - spin_unlock_irqrestore(&hp->lock, flags); - - return 0; -} - - -static const struct tty_operations hvsi_ops = { - .open = hvsi_open, - .close = hvsi_close, - .write = hvsi_write, - .hangup = hvsi_hangup, - .write_room = hvsi_write_room, - .chars_in_buffer = hvsi_chars_in_buffer, - .throttle = hvsi_throttle, - .unthrottle = hvsi_unthrottle, - .tiocmget = hvsi_tiocmget, - .tiocmset = hvsi_tiocmset, -}; - -static int __init hvsi_init(void) -{ - int i; - - hvsi_driver = alloc_tty_driver(hvsi_count); - if (!hvsi_driver) - return -ENOMEM; - - hvsi_driver->owner = THIS_MODULE; - hvsi_driver->driver_name = "hvsi"; - hvsi_driver->name = "hvsi"; - hvsi_driver->major = HVSI_MAJOR; - hvsi_driver->minor_start = HVSI_MINOR; - hvsi_driver->type = TTY_DRIVER_TYPE_SYSTEM; - hvsi_driver->init_termios = tty_std_termios; - hvsi_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL; - hvsi_driver->init_termios.c_ispeed = 9600; - hvsi_driver->init_termios.c_ospeed = 9600; - hvsi_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(hvsi_driver, &hvsi_ops); - - for (i=0; i < hvsi_count; i++) { - struct hvsi_struct *hp = &hvsi_ports[i]; - int ret = 1; - - ret = request_irq(hp->virq, hvsi_interrupt, IRQF_DISABLED, "hvsi", hp); - if (ret) - printk(KERN_ERR "HVSI: couldn't reserve irq 0x%x (error %i)\n", - hp->virq, ret); - } - hvsi_wait = wait_for_state; /* irqs active now */ - - if (tty_register_driver(hvsi_driver)) - panic("Couldn't register hvsi console driver\n"); - - printk(KERN_DEBUG "HVSI: registered %i devices\n", hvsi_count); - - return 0; -} -device_initcall(hvsi_init); - -/***** console (not tty) code: *****/ - -static void hvsi_console_print(struct console *console, const char *buf, - unsigned int count) -{ - struct hvsi_struct *hp = &hvsi_ports[console->index]; - char c[HVSI_MAX_OUTGOING_DATA] __ALIGNED__; - unsigned int i = 0, n = 0; - int ret, donecr = 0; - - mb(); - if (!is_open(hp)) - return; - - /* - * ugh, we have to translate LF -> CRLF ourselves, in place. - * copied from hvc_console.c: - */ - while (count > 0 || i > 0) { - if (count > 0 && i < sizeof(c)) { - if (buf[n] == '\n' && !donecr) { - c[i++] = '\r'; - donecr = 1; - } else { - c[i++] = buf[n++]; - donecr = 0; - --count; - } - } else { - ret = hvsi_put_chars(hp, c, i); - if (ret < 0) - i = 0; - i -= ret; - } - } -} - -static struct tty_driver *hvsi_console_device(struct console *console, - int *index) -{ - *index = console->index; - return hvsi_driver; -} - -static int __init hvsi_console_setup(struct console *console, char *options) -{ - struct hvsi_struct *hp; - int ret; - - if (console->index < 0 || console->index >= hvsi_count) - return -1; - hp = &hvsi_ports[console->index]; - - /* give the FSP a chance to change the baud rate when we re-open */ - hvsi_close_protocol(hp); - - ret = hvsi_handshake(hp); - if (ret < 0) - return ret; - - ret = hvsi_get_mctrl(hp); - if (ret < 0) - return ret; - - ret = hvsi_set_mctrl(hp, hp->mctrl | TIOCM_DTR); - if (ret < 0) - return ret; - - hp->flags |= HVSI_CONSOLE; - - return 0; -} - -static struct console hvsi_console = { - .name = "hvsi", - .write = hvsi_console_print, - .device = hvsi_console_device, - .setup = hvsi_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -static int __init hvsi_console_init(void) -{ - struct device_node *vty; - - hvsi_wait = poll_for_state; /* no irqs yet; must poll */ - - /* search device tree for vty nodes */ - for (vty = of_find_compatible_node(NULL, "serial", "hvterm-protocol"); - vty != NULL; - vty = of_find_compatible_node(vty, "serial", "hvterm-protocol")) { - struct hvsi_struct *hp; - const uint32_t *vtermno, *irq; - - vtermno = of_get_property(vty, "reg", NULL); - irq = of_get_property(vty, "interrupts", NULL); - if (!vtermno || !irq) - continue; - - if (hvsi_count >= MAX_NR_HVSI_CONSOLES) { - of_node_put(vty); - break; - } - - hp = &hvsi_ports[hvsi_count]; - INIT_DELAYED_WORK(&hp->writer, hvsi_write_worker); - INIT_WORK(&hp->handshaker, hvsi_handshaker); - init_waitqueue_head(&hp->emptyq); - init_waitqueue_head(&hp->stateq); - spin_lock_init(&hp->lock); - hp->index = hvsi_count; - hp->inbuf_end = hp->inbuf; - hp->state = HVSI_CLOSED; - hp->vtermno = *vtermno; - hp->virq = irq_create_mapping(NULL, irq[0]); - if (hp->virq == NO_IRQ) { - printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n", - __func__, irq[0]); - continue; - } - - hvsi_count++; - } - - if (hvsi_count) - register_console(&hvsi_console); - return 0; -} -console_initcall(hvsi_console_init); diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c deleted file mode 100644 index 896a2ced1d27..000000000000 --- a/drivers/char/virtio_console.c +++ /dev/null @@ -1,1838 +0,0 @@ -/* - * Copyright (C) 2006, 2007, 2009 Rusty Russell, IBM Corporation - * Copyright (C) 2009, 2010 Red Hat, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "hvc_console.h" - -/* - * This is a global struct for storing common data for all the devices - * this driver handles. - * - * Mainly, it has a linked list for all the consoles in one place so - * that callbacks from hvc for get_chars(), put_chars() work properly - * across multiple devices and multiple ports per device. - */ -struct ports_driver_data { - /* Used for registering chardevs */ - struct class *class; - - /* Used for exporting per-port information to debugfs */ - struct dentry *debugfs_dir; - - /* List of all the devices we're handling */ - struct list_head portdevs; - - /* Number of devices this driver is handling */ - unsigned int index; - - /* - * This is used to keep track of the number of hvc consoles - * spawned by this driver. This number is given as the first - * argument to hvc_alloc(). To correctly map an initial - * console spawned via hvc_instantiate to the console being - * hooked up via hvc_alloc, we need to pass the same vtermno. - * - * We also just assume the first console being initialised was - * the first one that got used as the initial console. - */ - unsigned int next_vtermno; - - /* All the console devices handled by this driver */ - struct list_head consoles; -}; -static struct ports_driver_data pdrvdata; - -DEFINE_SPINLOCK(pdrvdata_lock); - -/* This struct holds information that's relevant only for console ports */ -struct console { - /* We'll place all consoles in a list in the pdrvdata struct */ - struct list_head list; - - /* The hvc device associated with this console port */ - struct hvc_struct *hvc; - - /* The size of the console */ - struct winsize ws; - - /* - * This number identifies the number that we used to register - * with hvc in hvc_instantiate() and hvc_alloc(); this is the - * number passed on by the hvc callbacks to us to - * differentiate between the other console ports handled by - * this driver - */ - u32 vtermno; -}; - -struct port_buffer { - char *buf; - - /* size of the buffer in *buf above */ - size_t size; - - /* used length of the buffer */ - size_t len; - /* offset in the buf from which to consume data */ - size_t offset; -}; - -/* - * This is a per-device struct that stores data common to all the - * ports for that device (vdev->priv). - */ -struct ports_device { - /* Next portdev in the list, head is in the pdrvdata struct */ - struct list_head list; - - /* - * Workqueue handlers where we process deferred work after - * notification - */ - struct work_struct control_work; - - struct list_head ports; - - /* To protect the list of ports */ - spinlock_t ports_lock; - - /* To protect the vq operations for the control channel */ - spinlock_t cvq_lock; - - /* The current config space is stored here */ - struct virtio_console_config config; - - /* The virtio device we're associated with */ - struct virtio_device *vdev; - - /* - * A couple of virtqueues for the control channel: one for - * guest->host transfers, one for host->guest transfers - */ - struct virtqueue *c_ivq, *c_ovq; - - /* Array of per-port IO virtqueues */ - struct virtqueue **in_vqs, **out_vqs; - - /* Used for numbering devices for sysfs and debugfs */ - unsigned int drv_index; - - /* Major number for this device. Ports will be created as minors. */ - int chr_major; -}; - -/* This struct holds the per-port data */ -struct port { - /* Next port in the list, head is in the ports_device */ - struct list_head list; - - /* Pointer to the parent virtio_console device */ - struct ports_device *portdev; - - /* The current buffer from which data has to be fed to readers */ - struct port_buffer *inbuf; - - /* - * To protect the operations on the in_vq associated with this - * port. Has to be a spinlock because it can be called from - * interrupt context (get_char()). - */ - spinlock_t inbuf_lock; - - /* Protect the operations on the out_vq. */ - spinlock_t outvq_lock; - - /* The IO vqs for this port */ - struct virtqueue *in_vq, *out_vq; - - /* File in the debugfs directory that exposes this port's information */ - struct dentry *debugfs_file; - - /* - * The entries in this struct will be valid if this port is - * hooked up to an hvc console - */ - struct console cons; - - /* Each port associates with a separate char device */ - struct cdev *cdev; - struct device *dev; - - /* Reference-counting to handle port hot-unplugs and file operations */ - struct kref kref; - - /* A waitqueue for poll() or blocking read operations */ - wait_queue_head_t waitqueue; - - /* The 'name' of the port that we expose via sysfs properties */ - char *name; - - /* We can notify apps of host connect / disconnect events via SIGIO */ - struct fasync_struct *async_queue; - - /* The 'id' to identify the port with the Host */ - u32 id; - - bool outvq_full; - - /* Is the host device open */ - bool host_connected; - - /* We should allow only one process to open a port */ - bool guest_connected; -}; - -/* This is the very early arch-specified put chars function. */ -static int (*early_put_chars)(u32, const char *, int); - -static struct port *find_port_by_vtermno(u32 vtermno) -{ - struct port *port; - struct console *cons; - unsigned long flags; - - spin_lock_irqsave(&pdrvdata_lock, flags); - list_for_each_entry(cons, &pdrvdata.consoles, list) { - if (cons->vtermno == vtermno) { - port = container_of(cons, struct port, cons); - goto out; - } - } - port = NULL; -out: - spin_unlock_irqrestore(&pdrvdata_lock, flags); - return port; -} - -static struct port *find_port_by_devt_in_portdev(struct ports_device *portdev, - dev_t dev) -{ - struct port *port; - unsigned long flags; - - spin_lock_irqsave(&portdev->ports_lock, flags); - list_for_each_entry(port, &portdev->ports, list) - if (port->cdev->dev == dev) - goto out; - port = NULL; -out: - spin_unlock_irqrestore(&portdev->ports_lock, flags); - - return port; -} - -static struct port *find_port_by_devt(dev_t dev) -{ - struct ports_device *portdev; - struct port *port; - unsigned long flags; - - spin_lock_irqsave(&pdrvdata_lock, flags); - list_for_each_entry(portdev, &pdrvdata.portdevs, list) { - port = find_port_by_devt_in_portdev(portdev, dev); - if (port) - goto out; - } - port = NULL; -out: - spin_unlock_irqrestore(&pdrvdata_lock, flags); - return port; -} - -static struct port *find_port_by_id(struct ports_device *portdev, u32 id) -{ - struct port *port; - unsigned long flags; - - spin_lock_irqsave(&portdev->ports_lock, flags); - list_for_each_entry(port, &portdev->ports, list) - if (port->id == id) - goto out; - port = NULL; -out: - spin_unlock_irqrestore(&portdev->ports_lock, flags); - - return port; -} - -static struct port *find_port_by_vq(struct ports_device *portdev, - struct virtqueue *vq) -{ - struct port *port; - unsigned long flags; - - spin_lock_irqsave(&portdev->ports_lock, flags); - list_for_each_entry(port, &portdev->ports, list) - if (port->in_vq == vq || port->out_vq == vq) - goto out; - port = NULL; -out: - spin_unlock_irqrestore(&portdev->ports_lock, flags); - return port; -} - -static bool is_console_port(struct port *port) -{ - if (port->cons.hvc) - return true; - return false; -} - -static inline bool use_multiport(struct ports_device *portdev) -{ - /* - * This condition can be true when put_chars is called from - * early_init - */ - if (!portdev->vdev) - return 0; - return portdev->vdev->features[0] & (1 << VIRTIO_CONSOLE_F_MULTIPORT); -} - -static void free_buf(struct port_buffer *buf) -{ - kfree(buf->buf); - kfree(buf); -} - -static struct port_buffer *alloc_buf(size_t buf_size) -{ - struct port_buffer *buf; - - buf = kmalloc(sizeof(*buf), GFP_KERNEL); - if (!buf) - goto fail; - buf->buf = kzalloc(buf_size, GFP_KERNEL); - if (!buf->buf) - goto free_buf; - buf->len = 0; - buf->offset = 0; - buf->size = buf_size; - return buf; - -free_buf: - kfree(buf); -fail: - return NULL; -} - -/* Callers should take appropriate locks */ -static void *get_inbuf(struct port *port) -{ - struct port_buffer *buf; - struct virtqueue *vq; - unsigned int len; - - vq = port->in_vq; - buf = virtqueue_get_buf(vq, &len); - if (buf) { - buf->len = len; - buf->offset = 0; - } - return buf; -} - -/* - * Create a scatter-gather list representing our input buffer and put - * it in the queue. - * - * Callers should take appropriate locks. - */ -static int add_inbuf(struct virtqueue *vq, struct port_buffer *buf) -{ - struct scatterlist sg[1]; - int ret; - - sg_init_one(sg, buf->buf, buf->size); - - ret = virtqueue_add_buf(vq, sg, 0, 1, buf); - virtqueue_kick(vq); - return ret; -} - -/* Discard any unread data this port has. Callers lockers. */ -static void discard_port_data(struct port *port) -{ - struct port_buffer *buf; - struct virtqueue *vq; - unsigned int len; - int ret; - - vq = port->in_vq; - if (port->inbuf) - buf = port->inbuf; - else - buf = virtqueue_get_buf(vq, &len); - - ret = 0; - while (buf) { - if (add_inbuf(vq, buf) < 0) { - ret++; - free_buf(buf); - } - buf = virtqueue_get_buf(vq, &len); - } - port->inbuf = NULL; - if (ret) - dev_warn(port->dev, "Errors adding %d buffers back to vq\n", - ret); -} - -static bool port_has_data(struct port *port) -{ - unsigned long flags; - bool ret; - - spin_lock_irqsave(&port->inbuf_lock, flags); - if (port->inbuf) { - ret = true; - goto out; - } - port->inbuf = get_inbuf(port); - if (port->inbuf) { - ret = true; - goto out; - } - ret = false; -out: - spin_unlock_irqrestore(&port->inbuf_lock, flags); - return ret; -} - -static ssize_t __send_control_msg(struct ports_device *portdev, u32 port_id, - unsigned int event, unsigned int value) -{ - struct scatterlist sg[1]; - struct virtio_console_control cpkt; - struct virtqueue *vq; - unsigned int len; - - if (!use_multiport(portdev)) - return 0; - - cpkt.id = port_id; - cpkt.event = event; - cpkt.value = value; - - vq = portdev->c_ovq; - - sg_init_one(sg, &cpkt, sizeof(cpkt)); - if (virtqueue_add_buf(vq, sg, 1, 0, &cpkt) >= 0) { - virtqueue_kick(vq); - while (!virtqueue_get_buf(vq, &len)) - cpu_relax(); - } - return 0; -} - -static ssize_t send_control_msg(struct port *port, unsigned int event, - unsigned int value) -{ - /* Did the port get unplugged before userspace closed it? */ - if (port->portdev) - return __send_control_msg(port->portdev, port->id, event, value); - return 0; -} - -/* Callers must take the port->outvq_lock */ -static void reclaim_consumed_buffers(struct port *port) -{ - void *buf; - unsigned int len; - - while ((buf = virtqueue_get_buf(port->out_vq, &len))) { - kfree(buf); - port->outvq_full = false; - } -} - -static ssize_t send_buf(struct port *port, void *in_buf, size_t in_count, - bool nonblock) -{ - struct scatterlist sg[1]; - struct virtqueue *out_vq; - ssize_t ret; - unsigned long flags; - unsigned int len; - - out_vq = port->out_vq; - - spin_lock_irqsave(&port->outvq_lock, flags); - - reclaim_consumed_buffers(port); - - sg_init_one(sg, in_buf, in_count); - ret = virtqueue_add_buf(out_vq, sg, 1, 0, in_buf); - - /* Tell Host to go! */ - virtqueue_kick(out_vq); - - if (ret < 0) { - in_count = 0; - goto done; - } - - if (ret == 0) - port->outvq_full = true; - - if (nonblock) - goto done; - - /* - * Wait till the host acknowledges it pushed out the data we - * sent. This is done for data from the hvc_console; the tty - * operations are performed with spinlocks held so we can't - * sleep here. An alternative would be to copy the data to a - * buffer and relax the spinning requirement. The downside is - * we need to kmalloc a GFP_ATOMIC buffer each time the - * console driver writes something out. - */ - while (!virtqueue_get_buf(out_vq, &len)) - cpu_relax(); -done: - spin_unlock_irqrestore(&port->outvq_lock, flags); - /* - * We're expected to return the amount of data we wrote -- all - * of it - */ - return in_count; -} - -/* - * Give out the data that's requested from the buffer that we have - * queued up. - */ -static ssize_t fill_readbuf(struct port *port, char *out_buf, size_t out_count, - bool to_user) -{ - struct port_buffer *buf; - unsigned long flags; - - if (!out_count || !port_has_data(port)) - return 0; - - buf = port->inbuf; - out_count = min(out_count, buf->len - buf->offset); - - if (to_user) { - ssize_t ret; - - ret = copy_to_user(out_buf, buf->buf + buf->offset, out_count); - if (ret) - return -EFAULT; - } else { - memcpy(out_buf, buf->buf + buf->offset, out_count); - } - - buf->offset += out_count; - - if (buf->offset == buf->len) { - /* - * We're done using all the data in this buffer. - * Re-queue so that the Host can send us more data. - */ - spin_lock_irqsave(&port->inbuf_lock, flags); - port->inbuf = NULL; - - if (add_inbuf(port->in_vq, buf) < 0) - dev_warn(port->dev, "failed add_buf\n"); - - spin_unlock_irqrestore(&port->inbuf_lock, flags); - } - /* Return the number of bytes actually copied */ - return out_count; -} - -/* The condition that must be true for polling to end */ -static bool will_read_block(struct port *port) -{ - if (!port->guest_connected) { - /* Port got hot-unplugged. Let's exit. */ - return false; - } - return !port_has_data(port) && port->host_connected; -} - -static bool will_write_block(struct port *port) -{ - bool ret; - - if (!port->guest_connected) { - /* Port got hot-unplugged. Let's exit. */ - return false; - } - if (!port->host_connected) - return true; - - spin_lock_irq(&port->outvq_lock); - /* - * Check if the Host has consumed any buffers since we last - * sent data (this is only applicable for nonblocking ports). - */ - reclaim_consumed_buffers(port); - ret = port->outvq_full; - spin_unlock_irq(&port->outvq_lock); - - return ret; -} - -static ssize_t port_fops_read(struct file *filp, char __user *ubuf, - size_t count, loff_t *offp) -{ - struct port *port; - ssize_t ret; - - port = filp->private_data; - - if (!port_has_data(port)) { - /* - * If nothing's connected on the host just return 0 in - * case of list_empty; this tells the userspace app - * that there's no connection - */ - if (!port->host_connected) - return 0; - if (filp->f_flags & O_NONBLOCK) - return -EAGAIN; - - ret = wait_event_interruptible(port->waitqueue, - !will_read_block(port)); - if (ret < 0) - return ret; - } - /* Port got hot-unplugged. */ - if (!port->guest_connected) - return -ENODEV; - /* - * We could've received a disconnection message while we were - * waiting for more data. - * - * This check is not clubbed in the if() statement above as we - * might receive some data as well as the host could get - * disconnected after we got woken up from our wait. So we - * really want to give off whatever data we have and only then - * check for host_connected. - */ - if (!port_has_data(port) && !port->host_connected) - return 0; - - return fill_readbuf(port, ubuf, count, true); -} - -static ssize_t port_fops_write(struct file *filp, const char __user *ubuf, - size_t count, loff_t *offp) -{ - struct port *port; - char *buf; - ssize_t ret; - bool nonblock; - - /* Userspace could be out to fool us */ - if (!count) - return 0; - - port = filp->private_data; - - nonblock = filp->f_flags & O_NONBLOCK; - - if (will_write_block(port)) { - if (nonblock) - return -EAGAIN; - - ret = wait_event_interruptible(port->waitqueue, - !will_write_block(port)); - if (ret < 0) - return ret; - } - /* Port got hot-unplugged. */ - if (!port->guest_connected) - return -ENODEV; - - count = min((size_t)(32 * 1024), count); - - buf = kmalloc(count, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - ret = copy_from_user(buf, ubuf, count); - if (ret) { - ret = -EFAULT; - goto free_buf; - } - - /* - * We now ask send_buf() to not spin for generic ports -- we - * can re-use the same code path that non-blocking file - * descriptors take for blocking file descriptors since the - * wait is already done and we're certain the write will go - * through to the host. - */ - nonblock = true; - ret = send_buf(port, buf, count, nonblock); - - if (nonblock && ret > 0) - goto out; - -free_buf: - kfree(buf); -out: - return ret; -} - -static unsigned int port_fops_poll(struct file *filp, poll_table *wait) -{ - struct port *port; - unsigned int ret; - - port = filp->private_data; - poll_wait(filp, &port->waitqueue, wait); - - if (!port->guest_connected) { - /* Port got unplugged */ - return POLLHUP; - } - ret = 0; - if (!will_read_block(port)) - ret |= POLLIN | POLLRDNORM; - if (!will_write_block(port)) - ret |= POLLOUT; - if (!port->host_connected) - ret |= POLLHUP; - - return ret; -} - -static void remove_port(struct kref *kref); - -static int port_fops_release(struct inode *inode, struct file *filp) -{ - struct port *port; - - port = filp->private_data; - - /* Notify host of port being closed */ - send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0); - - spin_lock_irq(&port->inbuf_lock); - port->guest_connected = false; - - discard_port_data(port); - - spin_unlock_irq(&port->inbuf_lock); - - spin_lock_irq(&port->outvq_lock); - reclaim_consumed_buffers(port); - spin_unlock_irq(&port->outvq_lock); - - /* - * Locks aren't necessary here as a port can't be opened after - * unplug, and if a port isn't unplugged, a kref would already - * exist for the port. Plus, taking ports_lock here would - * create a dependency on other locks taken by functions - * inside remove_port if we're the last holder of the port, - * creating many problems. - */ - kref_put(&port->kref, remove_port); - - return 0; -} - -static int port_fops_open(struct inode *inode, struct file *filp) -{ - struct cdev *cdev = inode->i_cdev; - struct port *port; - int ret; - - port = find_port_by_devt(cdev->dev); - filp->private_data = port; - - /* Prevent against a port getting hot-unplugged at the same time */ - spin_lock_irq(&port->portdev->ports_lock); - kref_get(&port->kref); - spin_unlock_irq(&port->portdev->ports_lock); - - /* - * Don't allow opening of console port devices -- that's done - * via /dev/hvc - */ - if (is_console_port(port)) { - ret = -ENXIO; - goto out; - } - - /* Allow only one process to open a particular port at a time */ - spin_lock_irq(&port->inbuf_lock); - if (port->guest_connected) { - spin_unlock_irq(&port->inbuf_lock); - ret = -EMFILE; - goto out; - } - - port->guest_connected = true; - spin_unlock_irq(&port->inbuf_lock); - - spin_lock_irq(&port->outvq_lock); - /* - * There might be a chance that we missed reclaiming a few - * buffers in the window of the port getting previously closed - * and opening now. - */ - reclaim_consumed_buffers(port); - spin_unlock_irq(&port->outvq_lock); - - nonseekable_open(inode, filp); - - /* Notify host of port being opened */ - send_control_msg(filp->private_data, VIRTIO_CONSOLE_PORT_OPEN, 1); - - return 0; -out: - kref_put(&port->kref, remove_port); - return ret; -} - -static int port_fops_fasync(int fd, struct file *filp, int mode) -{ - struct port *port; - - port = filp->private_data; - return fasync_helper(fd, filp, mode, &port->async_queue); -} - -/* - * The file operations that we support: programs in the guest can open - * a console device, read from it, write to it, poll for data and - * close it. The devices are at - * /dev/vportp - */ -static const struct file_operations port_fops = { - .owner = THIS_MODULE, - .open = port_fops_open, - .read = port_fops_read, - .write = port_fops_write, - .poll = port_fops_poll, - .release = port_fops_release, - .fasync = port_fops_fasync, - .llseek = no_llseek, -}; - -/* - * The put_chars() callback is pretty straightforward. - * - * We turn the characters into a scatter-gather list, add it to the - * output queue and then kick the Host. Then we sit here waiting for - * it to finish: inefficient in theory, but in practice - * implementations will do it immediately (lguest's Launcher does). - */ -static int put_chars(u32 vtermno, const char *buf, int count) -{ - struct port *port; - - if (unlikely(early_put_chars)) - return early_put_chars(vtermno, buf, count); - - port = find_port_by_vtermno(vtermno); - if (!port) - return -EPIPE; - - return send_buf(port, (void *)buf, count, false); -} - -/* - * get_chars() is the callback from the hvc_console infrastructure - * when an interrupt is received. - * - * We call out to fill_readbuf that gets us the required data from the - * buffers that are queued up. - */ -static int get_chars(u32 vtermno, char *buf, int count) -{ - struct port *port; - - /* If we've not set up the port yet, we have no input to give. */ - if (unlikely(early_put_chars)) - return 0; - - port = find_port_by_vtermno(vtermno); - if (!port) - return -EPIPE; - - /* If we don't have an input queue yet, we can't get input. */ - BUG_ON(!port->in_vq); - - return fill_readbuf(port, buf, count, false); -} - -static void resize_console(struct port *port) -{ - struct virtio_device *vdev; - - /* The port could have been hot-unplugged */ - if (!port || !is_console_port(port)) - return; - - vdev = port->portdev->vdev; - if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_SIZE)) - hvc_resize(port->cons.hvc, port->cons.ws); -} - -/* We set the configuration at this point, since we now have a tty */ -static int notifier_add_vio(struct hvc_struct *hp, int data) -{ - struct port *port; - - port = find_port_by_vtermno(hp->vtermno); - if (!port) - return -EINVAL; - - hp->irq_requested = 1; - resize_console(port); - - return 0; -} - -static void notifier_del_vio(struct hvc_struct *hp, int data) -{ - hp->irq_requested = 0; -} - -/* The operations for console ports. */ -static const struct hv_ops hv_ops = { - .get_chars = get_chars, - .put_chars = put_chars, - .notifier_add = notifier_add_vio, - .notifier_del = notifier_del_vio, - .notifier_hangup = notifier_del_vio, -}; - -/* - * Console drivers are initialized very early so boot messages can go - * out, so we do things slightly differently from the generic virtio - * initialization of the net and block drivers. - * - * At this stage, the console is output-only. It's too early to set - * up a virtqueue, so we let the drivers do some boutique early-output - * thing. - */ -int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int)) -{ - early_put_chars = put_chars; - return hvc_instantiate(0, 0, &hv_ops); -} - -int init_port_console(struct port *port) -{ - int ret; - - /* - * The Host's telling us this port is a console port. Hook it - * up with an hvc console. - * - * To set up and manage our virtual console, we call - * hvc_alloc(). - * - * The first argument of hvc_alloc() is the virtual console - * number. The second argument is the parameter for the - * notification mechanism (like irq number). We currently - * leave this as zero, virtqueues have implicit notifications. - * - * The third argument is a "struct hv_ops" containing the - * put_chars() get_chars(), notifier_add() and notifier_del() - * pointers. The final argument is the output buffer size: we - * can do any size, so we put PAGE_SIZE here. - */ - port->cons.vtermno = pdrvdata.next_vtermno; - - port->cons.hvc = hvc_alloc(port->cons.vtermno, 0, &hv_ops, PAGE_SIZE); - if (IS_ERR(port->cons.hvc)) { - ret = PTR_ERR(port->cons.hvc); - dev_err(port->dev, - "error %d allocating hvc for port\n", ret); - port->cons.hvc = NULL; - return ret; - } - spin_lock_irq(&pdrvdata_lock); - pdrvdata.next_vtermno++; - list_add_tail(&port->cons.list, &pdrvdata.consoles); - spin_unlock_irq(&pdrvdata_lock); - port->guest_connected = true; - - /* - * Start using the new console output if this is the first - * console to come up. - */ - if (early_put_chars) - early_put_chars = NULL; - - /* Notify host of port being opened */ - send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 1); - - return 0; -} - -static ssize_t show_port_name(struct device *dev, - struct device_attribute *attr, char *buffer) -{ - struct port *port; - - port = dev_get_drvdata(dev); - - return sprintf(buffer, "%s\n", port->name); -} - -static DEVICE_ATTR(name, S_IRUGO, show_port_name, NULL); - -static struct attribute *port_sysfs_entries[] = { - &dev_attr_name.attr, - NULL -}; - -static struct attribute_group port_attribute_group = { - .name = NULL, /* put in device directory */ - .attrs = port_sysfs_entries, -}; - -static int debugfs_open(struct inode *inode, struct file *filp) -{ - filp->private_data = inode->i_private; - return 0; -} - -static ssize_t debugfs_read(struct file *filp, char __user *ubuf, - size_t count, loff_t *offp) -{ - struct port *port; - char *buf; - ssize_t ret, out_offset, out_count; - - out_count = 1024; - buf = kmalloc(out_count, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - port = filp->private_data; - out_offset = 0; - out_offset += snprintf(buf + out_offset, out_count, - "name: %s\n", port->name ? port->name : ""); - out_offset += snprintf(buf + out_offset, out_count - out_offset, - "guest_connected: %d\n", port->guest_connected); - out_offset += snprintf(buf + out_offset, out_count - out_offset, - "host_connected: %d\n", port->host_connected); - out_offset += snprintf(buf + out_offset, out_count - out_offset, - "outvq_full: %d\n", port->outvq_full); - out_offset += snprintf(buf + out_offset, out_count - out_offset, - "is_console: %s\n", - is_console_port(port) ? "yes" : "no"); - out_offset += snprintf(buf + out_offset, out_count - out_offset, - "console_vtermno: %u\n", port->cons.vtermno); - - ret = simple_read_from_buffer(ubuf, count, offp, buf, out_offset); - kfree(buf); - return ret; -} - -static const struct file_operations port_debugfs_ops = { - .owner = THIS_MODULE, - .open = debugfs_open, - .read = debugfs_read, -}; - -static void set_console_size(struct port *port, u16 rows, u16 cols) -{ - if (!port || !is_console_port(port)) - return; - - port->cons.ws.ws_row = rows; - port->cons.ws.ws_col = cols; -} - -static unsigned int fill_queue(struct virtqueue *vq, spinlock_t *lock) -{ - struct port_buffer *buf; - unsigned int nr_added_bufs; - int ret; - - nr_added_bufs = 0; - do { - buf = alloc_buf(PAGE_SIZE); - if (!buf) - break; - - spin_lock_irq(lock); - ret = add_inbuf(vq, buf); - if (ret < 0) { - spin_unlock_irq(lock); - free_buf(buf); - break; - } - nr_added_bufs++; - spin_unlock_irq(lock); - } while (ret > 0); - - return nr_added_bufs; -} - -static void send_sigio_to_port(struct port *port) -{ - if (port->async_queue && port->guest_connected) - kill_fasync(&port->async_queue, SIGIO, POLL_OUT); -} - -static int add_port(struct ports_device *portdev, u32 id) -{ - char debugfs_name[16]; - struct port *port; - struct port_buffer *buf; - dev_t devt; - unsigned int nr_added_bufs; - int err; - - port = kmalloc(sizeof(*port), GFP_KERNEL); - if (!port) { - err = -ENOMEM; - goto fail; - } - kref_init(&port->kref); - - port->portdev = portdev; - port->id = id; - - port->name = NULL; - port->inbuf = NULL; - port->cons.hvc = NULL; - port->async_queue = NULL; - - port->cons.ws.ws_row = port->cons.ws.ws_col = 0; - - port->host_connected = port->guest_connected = false; - - port->outvq_full = false; - - port->in_vq = portdev->in_vqs[port->id]; - port->out_vq = portdev->out_vqs[port->id]; - - port->cdev = cdev_alloc(); - if (!port->cdev) { - dev_err(&port->portdev->vdev->dev, "Error allocating cdev\n"); - err = -ENOMEM; - goto free_port; - } - port->cdev->ops = &port_fops; - - devt = MKDEV(portdev->chr_major, id); - err = cdev_add(port->cdev, devt, 1); - if (err < 0) { - dev_err(&port->portdev->vdev->dev, - "Error %d adding cdev for port %u\n", err, id); - goto free_cdev; - } - port->dev = device_create(pdrvdata.class, &port->portdev->vdev->dev, - devt, port, "vport%up%u", - port->portdev->drv_index, id); - if (IS_ERR(port->dev)) { - err = PTR_ERR(port->dev); - dev_err(&port->portdev->vdev->dev, - "Error %d creating device for port %u\n", - err, id); - goto free_cdev; - } - - spin_lock_init(&port->inbuf_lock); - spin_lock_init(&port->outvq_lock); - init_waitqueue_head(&port->waitqueue); - - /* Fill the in_vq with buffers so the host can send us data. */ - nr_added_bufs = fill_queue(port->in_vq, &port->inbuf_lock); - if (!nr_added_bufs) { - dev_err(port->dev, "Error allocating inbufs\n"); - err = -ENOMEM; - goto free_device; - } - - /* - * If we're not using multiport support, this has to be a console port - */ - if (!use_multiport(port->portdev)) { - err = init_port_console(port); - if (err) - goto free_inbufs; - } - - spin_lock_irq(&portdev->ports_lock); - list_add_tail(&port->list, &port->portdev->ports); - spin_unlock_irq(&portdev->ports_lock); - - /* - * Tell the Host we're set so that it can send us various - * configuration parameters for this port (eg, port name, - * caching, whether this is a console port, etc.) - */ - send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1); - - if (pdrvdata.debugfs_dir) { - /* - * Finally, create the debugfs file that we can use to - * inspect a port's state at any time - */ - sprintf(debugfs_name, "vport%up%u", - port->portdev->drv_index, id); - port->debugfs_file = debugfs_create_file(debugfs_name, 0444, - pdrvdata.debugfs_dir, - port, - &port_debugfs_ops); - } - return 0; - -free_inbufs: - while ((buf = virtqueue_detach_unused_buf(port->in_vq))) - free_buf(buf); -free_device: - device_destroy(pdrvdata.class, port->dev->devt); -free_cdev: - cdev_del(port->cdev); -free_port: - kfree(port); -fail: - /* The host might want to notify management sw about port add failure */ - __send_control_msg(portdev, id, VIRTIO_CONSOLE_PORT_READY, 0); - return err; -} - -/* No users remain, remove all port-specific data. */ -static void remove_port(struct kref *kref) -{ - struct port *port; - - port = container_of(kref, struct port, kref); - - sysfs_remove_group(&port->dev->kobj, &port_attribute_group); - device_destroy(pdrvdata.class, port->dev->devt); - cdev_del(port->cdev); - - kfree(port->name); - - debugfs_remove(port->debugfs_file); - - kfree(port); -} - -/* - * Port got unplugged. Remove port from portdev's list and drop the - * kref reference. If no userspace has this port opened, it will - * result in immediate removal the port. - */ -static void unplug_port(struct port *port) -{ - struct port_buffer *buf; - - spin_lock_irq(&port->portdev->ports_lock); - list_del(&port->list); - spin_unlock_irq(&port->portdev->ports_lock); - - if (port->guest_connected) { - port->guest_connected = false; - port->host_connected = false; - wake_up_interruptible(&port->waitqueue); - - /* Let the app know the port is going down. */ - send_sigio_to_port(port); - } - - if (is_console_port(port)) { - spin_lock_irq(&pdrvdata_lock); - list_del(&port->cons.list); - spin_unlock_irq(&pdrvdata_lock); -#if 0 - /* - * hvc_remove() not called as removing one hvc port - * results in other hvc ports getting frozen. - * - * Once this is resolved in hvc, this functionality - * will be enabled. Till that is done, the -EPIPE - * return from get_chars() above will help - * hvc_console.c to clean up on ports we remove here. - */ - hvc_remove(port->cons.hvc); -#endif - } - - /* Remove unused data this port might have received. */ - discard_port_data(port); - - reclaim_consumed_buffers(port); - - /* Remove buffers we queued up for the Host to send us data in. */ - while ((buf = virtqueue_detach_unused_buf(port->in_vq))) - free_buf(buf); - - /* - * We should just assume the device itself has gone off -- - * else a close on an open port later will try to send out a - * control message. - */ - port->portdev = NULL; - - /* - * Locks around here are not necessary - a port can't be - * opened after we removed the port struct from ports_list - * above. - */ - kref_put(&port->kref, remove_port); -} - -/* Any private messages that the Host and Guest want to share */ -static void handle_control_message(struct ports_device *portdev, - struct port_buffer *buf) -{ - struct virtio_console_control *cpkt; - struct port *port; - size_t name_size; - int err; - - cpkt = (struct virtio_console_control *)(buf->buf + buf->offset); - - port = find_port_by_id(portdev, cpkt->id); - if (!port && cpkt->event != VIRTIO_CONSOLE_PORT_ADD) { - /* No valid header at start of buffer. Drop it. */ - dev_dbg(&portdev->vdev->dev, - "Invalid index %u in control packet\n", cpkt->id); - return; - } - - switch (cpkt->event) { - case VIRTIO_CONSOLE_PORT_ADD: - if (port) { - dev_dbg(&portdev->vdev->dev, - "Port %u already added\n", port->id); - send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1); - break; - } - if (cpkt->id >= portdev->config.max_nr_ports) { - dev_warn(&portdev->vdev->dev, - "Request for adding port with out-of-bound id %u, max. supported id: %u\n", - cpkt->id, portdev->config.max_nr_ports - 1); - break; - } - add_port(portdev, cpkt->id); - break; - case VIRTIO_CONSOLE_PORT_REMOVE: - unplug_port(port); - break; - case VIRTIO_CONSOLE_CONSOLE_PORT: - if (!cpkt->value) - break; - if (is_console_port(port)) - break; - - init_port_console(port); - /* - * Could remove the port here in case init fails - but - * have to notify the host first. - */ - break; - case VIRTIO_CONSOLE_RESIZE: { - struct { - __u16 rows; - __u16 cols; - } size; - - if (!is_console_port(port)) - break; - - memcpy(&size, buf->buf + buf->offset + sizeof(*cpkt), - sizeof(size)); - set_console_size(port, size.rows, size.cols); - - port->cons.hvc->irq_requested = 1; - resize_console(port); - break; - } - case VIRTIO_CONSOLE_PORT_OPEN: - port->host_connected = cpkt->value; - wake_up_interruptible(&port->waitqueue); - /* - * If the host port got closed and the host had any - * unconsumed buffers, we'll be able to reclaim them - * now. - */ - spin_lock_irq(&port->outvq_lock); - reclaim_consumed_buffers(port); - spin_unlock_irq(&port->outvq_lock); - - /* - * If the guest is connected, it'll be interested in - * knowing the host connection state changed. - */ - send_sigio_to_port(port); - break; - case VIRTIO_CONSOLE_PORT_NAME: - /* - * Skip the size of the header and the cpkt to get the size - * of the name that was sent - */ - name_size = buf->len - buf->offset - sizeof(*cpkt) + 1; - - port->name = kmalloc(name_size, GFP_KERNEL); - if (!port->name) { - dev_err(port->dev, - "Not enough space to store port name\n"); - break; - } - strncpy(port->name, buf->buf + buf->offset + sizeof(*cpkt), - name_size - 1); - port->name[name_size - 1] = 0; - - /* - * Since we only have one sysfs attribute, 'name', - * create it only if we have a name for the port. - */ - err = sysfs_create_group(&port->dev->kobj, - &port_attribute_group); - if (err) { - dev_err(port->dev, - "Error %d creating sysfs device attributes\n", - err); - } else { - /* - * Generate a udev event so that appropriate - * symlinks can be created based on udev - * rules. - */ - kobject_uevent(&port->dev->kobj, KOBJ_CHANGE); - } - break; - } -} - -static void control_work_handler(struct work_struct *work) -{ - struct ports_device *portdev; - struct virtqueue *vq; - struct port_buffer *buf; - unsigned int len; - - portdev = container_of(work, struct ports_device, control_work); - vq = portdev->c_ivq; - - spin_lock(&portdev->cvq_lock); - while ((buf = virtqueue_get_buf(vq, &len))) { - spin_unlock(&portdev->cvq_lock); - - buf->len = len; - buf->offset = 0; - - handle_control_message(portdev, buf); - - spin_lock(&portdev->cvq_lock); - if (add_inbuf(portdev->c_ivq, buf) < 0) { - dev_warn(&portdev->vdev->dev, - "Error adding buffer to queue\n"); - free_buf(buf); - } - } - spin_unlock(&portdev->cvq_lock); -} - -static void in_intr(struct virtqueue *vq) -{ - struct port *port; - unsigned long flags; - - port = find_port_by_vq(vq->vdev->priv, vq); - if (!port) - return; - - spin_lock_irqsave(&port->inbuf_lock, flags); - if (!port->inbuf) - port->inbuf = get_inbuf(port); - - /* - * Don't queue up data when port is closed. This condition - * can be reached when a console port is not yet connected (no - * tty is spawned) and the host sends out data to console - * ports. For generic serial ports, the host won't - * (shouldn't) send data till the guest is connected. - */ - if (!port->guest_connected) - discard_port_data(port); - - spin_unlock_irqrestore(&port->inbuf_lock, flags); - - wake_up_interruptible(&port->waitqueue); - - /* Send a SIGIO indicating new data in case the process asked for it */ - send_sigio_to_port(port); - - if (is_console_port(port) && hvc_poll(port->cons.hvc)) - hvc_kick(); -} - -static void control_intr(struct virtqueue *vq) -{ - struct ports_device *portdev; - - portdev = vq->vdev->priv; - schedule_work(&portdev->control_work); -} - -static void config_intr(struct virtio_device *vdev) -{ - struct ports_device *portdev; - - portdev = vdev->priv; - - if (!use_multiport(portdev)) { - struct port *port; - u16 rows, cols; - - vdev->config->get(vdev, - offsetof(struct virtio_console_config, cols), - &cols, sizeof(u16)); - vdev->config->get(vdev, - offsetof(struct virtio_console_config, rows), - &rows, sizeof(u16)); - - port = find_port_by_id(portdev, 0); - set_console_size(port, rows, cols); - - /* - * We'll use this way of resizing only for legacy - * support. For newer userspace - * (VIRTIO_CONSOLE_F_MULTPORT+), use control messages - * to indicate console size changes so that it can be - * done per-port. - */ - resize_console(port); - } -} - -static int init_vqs(struct ports_device *portdev) -{ - vq_callback_t **io_callbacks; - char **io_names; - struct virtqueue **vqs; - u32 i, j, nr_ports, nr_queues; - int err; - - nr_ports = portdev->config.max_nr_ports; - nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2; - - vqs = kmalloc(nr_queues * sizeof(struct virtqueue *), GFP_KERNEL); - io_callbacks = kmalloc(nr_queues * sizeof(vq_callback_t *), GFP_KERNEL); - io_names = kmalloc(nr_queues * sizeof(char *), GFP_KERNEL); - portdev->in_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *), - GFP_KERNEL); - portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *), - GFP_KERNEL); - if (!vqs || !io_callbacks || !io_names || !portdev->in_vqs || - !portdev->out_vqs) { - err = -ENOMEM; - goto free; - } - - /* - * For backward compat (newer host but older guest), the host - * spawns a console port first and also inits the vqs for port - * 0 before others. - */ - j = 0; - io_callbacks[j] = in_intr; - io_callbacks[j + 1] = NULL; - io_names[j] = "input"; - io_names[j + 1] = "output"; - j += 2; - - if (use_multiport(portdev)) { - io_callbacks[j] = control_intr; - io_callbacks[j + 1] = NULL; - io_names[j] = "control-i"; - io_names[j + 1] = "control-o"; - - for (i = 1; i < nr_ports; i++) { - j += 2; - io_callbacks[j] = in_intr; - io_callbacks[j + 1] = NULL; - io_names[j] = "input"; - io_names[j + 1] = "output"; - } - } - /* Find the queues. */ - err = portdev->vdev->config->find_vqs(portdev->vdev, nr_queues, vqs, - io_callbacks, - (const char **)io_names); - if (err) - goto free; - - j = 0; - portdev->in_vqs[0] = vqs[0]; - portdev->out_vqs[0] = vqs[1]; - j += 2; - if (use_multiport(portdev)) { - portdev->c_ivq = vqs[j]; - portdev->c_ovq = vqs[j + 1]; - - for (i = 1; i < nr_ports; i++) { - j += 2; - portdev->in_vqs[i] = vqs[j]; - portdev->out_vqs[i] = vqs[j + 1]; - } - } - kfree(io_names); - kfree(io_callbacks); - kfree(vqs); - - return 0; - -free: - kfree(portdev->out_vqs); - kfree(portdev->in_vqs); - kfree(io_names); - kfree(io_callbacks); - kfree(vqs); - - return err; -} - -static const struct file_operations portdev_fops = { - .owner = THIS_MODULE, -}; - -/* - * Once we're further in boot, we get probed like any other virtio - * device. - * - * If the host also supports multiple console ports, we check the - * config space to see how many ports the host has spawned. We - * initialize each port found. - */ -static int __devinit virtcons_probe(struct virtio_device *vdev) -{ - struct ports_device *portdev; - int err; - bool multiport; - - portdev = kmalloc(sizeof(*portdev), GFP_KERNEL); - if (!portdev) { - err = -ENOMEM; - goto fail; - } - - /* Attach this portdev to this virtio_device, and vice-versa. */ - portdev->vdev = vdev; - vdev->priv = portdev; - - spin_lock_irq(&pdrvdata_lock); - portdev->drv_index = pdrvdata.index++; - spin_unlock_irq(&pdrvdata_lock); - - portdev->chr_major = register_chrdev(0, "virtio-portsdev", - &portdev_fops); - if (portdev->chr_major < 0) { - dev_err(&vdev->dev, - "Error %d registering chrdev for device %u\n", - portdev->chr_major, portdev->drv_index); - err = portdev->chr_major; - goto free; - } - - multiport = false; - portdev->config.max_nr_ports = 1; - if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT)) { - multiport = true; - vdev->features[0] |= 1 << VIRTIO_CONSOLE_F_MULTIPORT; - - vdev->config->get(vdev, offsetof(struct virtio_console_config, - max_nr_ports), - &portdev->config.max_nr_ports, - sizeof(portdev->config.max_nr_ports)); - } - - /* Let the Host know we support multiple ports.*/ - vdev->config->finalize_features(vdev); - - err = init_vqs(portdev); - if (err < 0) { - dev_err(&vdev->dev, "Error %d initializing vqs\n", err); - goto free_chrdev; - } - - spin_lock_init(&portdev->ports_lock); - INIT_LIST_HEAD(&portdev->ports); - - if (multiport) { - unsigned int nr_added_bufs; - - spin_lock_init(&portdev->cvq_lock); - INIT_WORK(&portdev->control_work, &control_work_handler); - - nr_added_bufs = fill_queue(portdev->c_ivq, &portdev->cvq_lock); - if (!nr_added_bufs) { - dev_err(&vdev->dev, - "Error allocating buffers for control queue\n"); - err = -ENOMEM; - goto free_vqs; - } - } else { - /* - * For backward compatibility: Create a console port - * if we're running on older host. - */ - add_port(portdev, 0); - } - - spin_lock_irq(&pdrvdata_lock); - list_add_tail(&portdev->list, &pdrvdata.portdevs); - spin_unlock_irq(&pdrvdata_lock); - - __send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID, - VIRTIO_CONSOLE_DEVICE_READY, 1); - return 0; - -free_vqs: - /* The host might want to notify mgmt sw about device add failure */ - __send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID, - VIRTIO_CONSOLE_DEVICE_READY, 0); - vdev->config->del_vqs(vdev); - kfree(portdev->in_vqs); - kfree(portdev->out_vqs); -free_chrdev: - unregister_chrdev(portdev->chr_major, "virtio-portsdev"); -free: - kfree(portdev); -fail: - return err; -} - -static void virtcons_remove(struct virtio_device *vdev) -{ - struct ports_device *portdev; - struct port *port, *port2; - - portdev = vdev->priv; - - spin_lock_irq(&pdrvdata_lock); - list_del(&portdev->list); - spin_unlock_irq(&pdrvdata_lock); - - /* Disable interrupts for vqs */ - vdev->config->reset(vdev); - /* Finish up work that's lined up */ - cancel_work_sync(&portdev->control_work); - - list_for_each_entry_safe(port, port2, &portdev->ports, list) - unplug_port(port); - - unregister_chrdev(portdev->chr_major, "virtio-portsdev"); - - /* - * When yanking out a device, we immediately lose the - * (device-side) queues. So there's no point in keeping the - * guest side around till we drop our final reference. This - * also means that any ports which are in an open state will - * have to just stop using the port, as the vqs are going - * away. - */ - if (use_multiport(portdev)) { - struct port_buffer *buf; - unsigned int len; - - while ((buf = virtqueue_get_buf(portdev->c_ivq, &len))) - free_buf(buf); - - while ((buf = virtqueue_detach_unused_buf(portdev->c_ivq))) - free_buf(buf); - } - - vdev->config->del_vqs(vdev); - kfree(portdev->in_vqs); - kfree(portdev->out_vqs); - - kfree(portdev); -} - -static struct virtio_device_id id_table[] = { - { VIRTIO_ID_CONSOLE, VIRTIO_DEV_ANY_ID }, - { 0 }, -}; - -static unsigned int features[] = { - VIRTIO_CONSOLE_F_SIZE, - VIRTIO_CONSOLE_F_MULTIPORT, -}; - -static struct virtio_driver virtio_console = { - .feature_table = features, - .feature_table_size = ARRAY_SIZE(features), - .driver.name = KBUILD_MODNAME, - .driver.owner = THIS_MODULE, - .id_table = id_table, - .probe = virtcons_probe, - .remove = virtcons_remove, - .config_changed = config_intr, -}; - -static int __init init(void) -{ - int err; - - pdrvdata.class = class_create(THIS_MODULE, "virtio-ports"); - if (IS_ERR(pdrvdata.class)) { - err = PTR_ERR(pdrvdata.class); - pr_err("Error %d creating virtio-ports class\n", err); - return err; - } - - pdrvdata.debugfs_dir = debugfs_create_dir("virtio-ports", NULL); - if (!pdrvdata.debugfs_dir) { - pr_warning("Error %ld creating debugfs dir for virtio-ports\n", - PTR_ERR(pdrvdata.debugfs_dir)); - } - INIT_LIST_HEAD(&pdrvdata.consoles); - INIT_LIST_HEAD(&pdrvdata.portdevs); - - return register_virtio_driver(&virtio_console); -} - -static void __exit fini(void) -{ - unregister_virtio_driver(&virtio_console); - - class_destroy(pdrvdata.class); - if (pdrvdata.debugfs_dir) - debugfs_remove_recursive(pdrvdata.debugfs_dir); -} -module_init(init); -module_exit(fini); - -MODULE_DEVICE_TABLE(virtio, id_table); -MODULE_DESCRIPTION("Virtio console driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index c43ef48b1a0f..d3685f071b8d 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_N_GSM) += n_gsm.o obj-$(CONFIG_R3964) += n_r3964.o obj-y += vt/ +obj-$(CONFIG_HVC_DRIVER) += hvc/ diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile new file mode 100644 index 000000000000..e6bed5f177ff --- /dev/null +++ b/drivers/tty/hvc/Makefile @@ -0,0 +1,13 @@ +obj-$(CONFIG_HVC_CONSOLE) += hvc_vio.o hvsi.o +obj-$(CONFIG_HVC_ISERIES) += hvc_iseries.o +obj-$(CONFIG_HVC_RTAS) += hvc_rtas.o +obj-$(CONFIG_HVC_TILE) += hvc_tile.o +obj-$(CONFIG_HVC_DCC) += hvc_dcc.o +obj-$(CONFIG_HVC_BEAT) += hvc_beat.o +obj-$(CONFIG_HVC_DRIVER) += hvc_console.o +obj-$(CONFIG_HVC_IRQ) += hvc_irq.o +obj-$(CONFIG_HVC_XEN) += hvc_xen.o +obj-$(CONFIG_HVC_IUCV) += hvc_iucv.o +obj-$(CONFIG_HVC_UDBG) += hvc_udbg.o +obj-$(CONFIG_HVCS) += hvcs.o +obj-$(CONFIG_VIRTIO_CONSOLE) += virtio_console.o diff --git a/drivers/tty/hvc/hvc_beat.c b/drivers/tty/hvc/hvc_beat.c new file mode 100644 index 000000000000..5fe4631e2a61 --- /dev/null +++ b/drivers/tty/hvc/hvc_beat.c @@ -0,0 +1,134 @@ +/* + * Beat hypervisor console driver + * + * (C) Copyright 2006 TOSHIBA CORPORATION + * + * This code is based on drivers/char/hvc_rtas.c: + * (C) Copyright IBM Corporation 2001-2005 + * (C) Copyright Red Hat, Inc. 2005 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "hvc_console.h" + +extern int64_t beat_get_term_char(uint64_t, uint64_t *, uint64_t *, uint64_t *); +extern int64_t beat_put_term_char(uint64_t, uint64_t, uint64_t, uint64_t); + +struct hvc_struct *hvc_beat_dev = NULL; + +/* bug: only one queue is available regardless of vtermno */ +static int hvc_beat_get_chars(uint32_t vtermno, char *buf, int cnt) +{ + static unsigned char q[sizeof(unsigned long) * 2] + __attribute__((aligned(sizeof(unsigned long)))); + static int qlen = 0; + u64 got; + +again: + if (qlen) { + if (qlen > cnt) { + memcpy(buf, q, cnt); + qlen -= cnt; + memmove(q + cnt, q, qlen); + return cnt; + } else { /* qlen <= cnt */ + int r; + + memcpy(buf, q, qlen); + r = qlen; + qlen = 0; + return r; + } + } + if (beat_get_term_char(vtermno, &got, + ((u64 *)q), ((u64 *)q) + 1) == 0) { + qlen = got; + goto again; + } + return 0; +} + +static int hvc_beat_put_chars(uint32_t vtermno, const char *buf, int cnt) +{ + unsigned long kb[2]; + int rest, nlen; + + for (rest = cnt; rest > 0; rest -= nlen) { + nlen = (rest > 16) ? 16 : rest; + memcpy(kb, buf, nlen); + beat_put_term_char(vtermno, nlen, kb[0], kb[1]); + buf += nlen; + } + return cnt; +} + +static const struct hv_ops hvc_beat_get_put_ops = { + .get_chars = hvc_beat_get_chars, + .put_chars = hvc_beat_put_chars, +}; + +static int hvc_beat_useit = 1; + +static int hvc_beat_config(char *p) +{ + hvc_beat_useit = simple_strtoul(p, NULL, 0); + return 0; +} + +static int __init hvc_beat_console_init(void) +{ + if (hvc_beat_useit && of_machine_is_compatible("Beat")) { + hvc_instantiate(0, 0, &hvc_beat_get_put_ops); + } + return 0; +} + +/* temp */ +static int __init hvc_beat_init(void) +{ + struct hvc_struct *hp; + + if (!firmware_has_feature(FW_FEATURE_BEAT)) + return -ENODEV; + + hp = hvc_alloc(0, NO_IRQ, &hvc_beat_get_put_ops, 16); + if (IS_ERR(hp)) + return PTR_ERR(hp); + hvc_beat_dev = hp; + return 0; +} + +static void __exit hvc_beat_exit(void) +{ + if (hvc_beat_dev) + hvc_remove(hvc_beat_dev); +} + +module_init(hvc_beat_init); +module_exit(hvc_beat_exit); + +__setup("hvc_beat=", hvc_beat_config); + +console_initcall(hvc_beat_console_init); diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c new file mode 100644 index 000000000000..e9cba13ee800 --- /dev/null +++ b/drivers/tty/hvc/hvc_console.c @@ -0,0 +1,914 @@ +/* + * Copyright (C) 2001 Anton Blanchard , IBM + * Copyright (C) 2001 Paul Mackerras , IBM + * Copyright (C) 2004 Benjamin Herrenschmidt , IBM Corp. + * Copyright (C) 2004 IBM Corporation + * + * Additional Author(s): + * Ryan S. Arnold + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "hvc_console.h" + +#define HVC_MAJOR 229 +#define HVC_MINOR 0 + +/* + * Wait this long per iteration while trying to push buffered data to the + * hypervisor before allowing the tty to complete a close operation. + */ +#define HVC_CLOSE_WAIT (HZ/100) /* 1/10 of a second */ + +/* + * These sizes are most efficient for vio, because they are the + * native transfer size. We could make them selectable in the + * future to better deal with backends that want other buffer sizes. + */ +#define N_OUTBUF 16 +#define N_INBUF 16 + +#define __ALIGNED__ __attribute__((__aligned__(sizeof(long)))) + +static struct tty_driver *hvc_driver; +static struct task_struct *hvc_task; + +/* Picks up late kicks after list walk but before schedule() */ +static int hvc_kicked; + +static int hvc_init(void); + +#ifdef CONFIG_MAGIC_SYSRQ +static int sysrq_pressed; +#endif + +/* dynamic list of hvc_struct instances */ +static LIST_HEAD(hvc_structs); + +/* + * Protect the list of hvc_struct instances from inserts and removals during + * list traversal. + */ +static DEFINE_SPINLOCK(hvc_structs_lock); + +/* + * This value is used to assign a tty->index value to a hvc_struct based + * upon order of exposure via hvc_probe(), when we can not match it to + * a console candidate registered with hvc_instantiate(). + */ +static int last_hvc = -1; + +/* + * Do not call this function with either the hvc_structs_lock or the hvc_struct + * lock held. If successful, this function increments the kref reference + * count against the target hvc_struct so it should be released when finished. + */ +static struct hvc_struct *hvc_get_by_index(int index) +{ + struct hvc_struct *hp; + unsigned long flags; + + spin_lock(&hvc_structs_lock); + + list_for_each_entry(hp, &hvc_structs, next) { + spin_lock_irqsave(&hp->lock, flags); + if (hp->index == index) { + kref_get(&hp->kref); + spin_unlock_irqrestore(&hp->lock, flags); + spin_unlock(&hvc_structs_lock); + return hp; + } + spin_unlock_irqrestore(&hp->lock, flags); + } + hp = NULL; + + spin_unlock(&hvc_structs_lock); + return hp; +} + + +/* + * Initial console vtermnos for console API usage prior to full console + * initialization. Any vty adapter outside this range will not have usable + * console interfaces but can still be used as a tty device. This has to be + * static because kmalloc will not work during early console init. + */ +static const struct hv_ops *cons_ops[MAX_NR_HVC_CONSOLES]; +static uint32_t vtermnos[MAX_NR_HVC_CONSOLES] = + {[0 ... MAX_NR_HVC_CONSOLES - 1] = -1}; + +/* + * Console APIs, NOT TTY. These APIs are available immediately when + * hvc_console_setup() finds adapters. + */ + +static void hvc_console_print(struct console *co, const char *b, + unsigned count) +{ + char c[N_OUTBUF] __ALIGNED__; + unsigned i = 0, n = 0; + int r, donecr = 0, index = co->index; + + /* Console access attempt outside of acceptable console range. */ + if (index >= MAX_NR_HVC_CONSOLES) + return; + + /* This console adapter was removed so it is not usable. */ + if (vtermnos[index] == -1) + return; + + while (count > 0 || i > 0) { + if (count > 0 && i < sizeof(c)) { + if (b[n] == '\n' && !donecr) { + c[i++] = '\r'; + donecr = 1; + } else { + c[i++] = b[n++]; + donecr = 0; + --count; + } + } else { + r = cons_ops[index]->put_chars(vtermnos[index], c, i); + if (r <= 0) { + /* throw away chars on error */ + i = 0; + } else if (r > 0) { + i -= r; + if (i > 0) + memmove(c, c+r, i); + } + } + } +} + +static struct tty_driver *hvc_console_device(struct console *c, int *index) +{ + if (vtermnos[c->index] == -1) + return NULL; + + *index = c->index; + return hvc_driver; +} + +static int __init hvc_console_setup(struct console *co, char *options) +{ + if (co->index < 0 || co->index >= MAX_NR_HVC_CONSOLES) + return -ENODEV; + + if (vtermnos[co->index] == -1) + return -ENODEV; + + return 0; +} + +static struct console hvc_console = { + .name = "hvc", + .write = hvc_console_print, + .device = hvc_console_device, + .setup = hvc_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +/* + * Early console initialization. Precedes driver initialization. + * + * (1) we are first, and the user specified another driver + * -- index will remain -1 + * (2) we are first and the user specified no driver + * -- index will be set to 0, then we will fail setup. + * (3) we are first and the user specified our driver + * -- index will be set to user specified driver, and we will fail + * (4) we are after driver, and this initcall will register us + * -- if the user didn't specify a driver then the console will match + * + * Note that for cases 2 and 3, we will match later when the io driver + * calls hvc_instantiate() and call register again. + */ +static int __init hvc_console_init(void) +{ + register_console(&hvc_console); + return 0; +} +console_initcall(hvc_console_init); + +/* callback when the kboject ref count reaches zero. */ +static void destroy_hvc_struct(struct kref *kref) +{ + struct hvc_struct *hp = container_of(kref, struct hvc_struct, kref); + unsigned long flags; + + spin_lock(&hvc_structs_lock); + + spin_lock_irqsave(&hp->lock, flags); + list_del(&(hp->next)); + spin_unlock_irqrestore(&hp->lock, flags); + + spin_unlock(&hvc_structs_lock); + + kfree(hp); +} + +/* + * hvc_instantiate() is an early console discovery method which locates + * consoles * prior to the vio subsystem discovering them. Hotplugged + * vty adapters do NOT get an hvc_instantiate() callback since they + * appear after early console init. + */ +int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops) +{ + struct hvc_struct *hp; + + if (index < 0 || index >= MAX_NR_HVC_CONSOLES) + return -1; + + if (vtermnos[index] != -1) + return -1; + + /* make sure no no tty has been registered in this index */ + hp = hvc_get_by_index(index); + if (hp) { + kref_put(&hp->kref, destroy_hvc_struct); + return -1; + } + + vtermnos[index] = vtermno; + cons_ops[index] = ops; + + /* reserve all indices up to and including this index */ + if (last_hvc < index) + last_hvc = index; + + /* if this index is what the user requested, then register + * now (setup won't fail at this point). It's ok to just + * call register again if previously .setup failed. + */ + if (index == hvc_console.index) + register_console(&hvc_console); + + return 0; +} +EXPORT_SYMBOL_GPL(hvc_instantiate); + +/* Wake the sleeping khvcd */ +void hvc_kick(void) +{ + hvc_kicked = 1; + wake_up_process(hvc_task); +} +EXPORT_SYMBOL_GPL(hvc_kick); + +static void hvc_unthrottle(struct tty_struct *tty) +{ + hvc_kick(); +} + +/* + * The TTY interface won't be used until after the vio layer has exposed the vty + * adapter to the kernel. + */ +static int hvc_open(struct tty_struct *tty, struct file * filp) +{ + struct hvc_struct *hp; + unsigned long flags; + int rc = 0; + + /* Auto increments kref reference if found. */ + if (!(hp = hvc_get_by_index(tty->index))) + return -ENODEV; + + spin_lock_irqsave(&hp->lock, flags); + /* Check and then increment for fast path open. */ + if (hp->count++ > 0) { + tty_kref_get(tty); + spin_unlock_irqrestore(&hp->lock, flags); + hvc_kick(); + return 0; + } /* else count == 0 */ + + tty->driver_data = hp; + + hp->tty = tty_kref_get(tty); + + spin_unlock_irqrestore(&hp->lock, flags); + + if (hp->ops->notifier_add) + rc = hp->ops->notifier_add(hp, hp->data); + + /* + * If the notifier fails we return an error. The tty layer + * will call hvc_close() after a failed open but we don't want to clean + * up there so we'll clean up here and clear out the previously set + * tty fields and return the kref reference. + */ + if (rc) { + spin_lock_irqsave(&hp->lock, flags); + hp->tty = NULL; + spin_unlock_irqrestore(&hp->lock, flags); + tty_kref_put(tty); + tty->driver_data = NULL; + kref_put(&hp->kref, destroy_hvc_struct); + printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc); + } + /* Force wakeup of the polling thread */ + hvc_kick(); + + return rc; +} + +static void hvc_close(struct tty_struct *tty, struct file * filp) +{ + struct hvc_struct *hp; + unsigned long flags; + + if (tty_hung_up_p(filp)) + return; + + /* + * No driver_data means that this close was issued after a failed + * hvc_open by the tty layer's release_dev() function and we can just + * exit cleanly because the kref reference wasn't made. + */ + if (!tty->driver_data) + return; + + hp = tty->driver_data; + + spin_lock_irqsave(&hp->lock, flags); + + if (--hp->count == 0) { + /* We are done with the tty pointer now. */ + hp->tty = NULL; + spin_unlock_irqrestore(&hp->lock, flags); + + if (hp->ops->notifier_del) + hp->ops->notifier_del(hp, hp->data); + + /* cancel pending tty resize work */ + cancel_work_sync(&hp->tty_resize); + + /* + * Chain calls chars_in_buffer() and returns immediately if + * there is no buffered data otherwise sleeps on a wait queue + * waking periodically to check chars_in_buffer(). + */ + tty_wait_until_sent(tty, HVC_CLOSE_WAIT); + } else { + if (hp->count < 0) + printk(KERN_ERR "hvc_close %X: oops, count is %d\n", + hp->vtermno, hp->count); + spin_unlock_irqrestore(&hp->lock, flags); + } + + tty_kref_put(tty); + kref_put(&hp->kref, destroy_hvc_struct); +} + +static void hvc_hangup(struct tty_struct *tty) +{ + struct hvc_struct *hp = tty->driver_data; + unsigned long flags; + int temp_open_count; + + if (!hp) + return; + + /* cancel pending tty resize work */ + cancel_work_sync(&hp->tty_resize); + + spin_lock_irqsave(&hp->lock, flags); + + /* + * The N_TTY line discipline has problems such that in a close vs + * open->hangup case this can be called after the final close so prevent + * that from happening for now. + */ + if (hp->count <= 0) { + spin_unlock_irqrestore(&hp->lock, flags); + return; + } + + temp_open_count = hp->count; + hp->count = 0; + hp->n_outbuf = 0; + hp->tty = NULL; + + spin_unlock_irqrestore(&hp->lock, flags); + + if (hp->ops->notifier_hangup) + hp->ops->notifier_hangup(hp, hp->data); + + while(temp_open_count) { + --temp_open_count; + tty_kref_put(tty); + kref_put(&hp->kref, destroy_hvc_struct); + } +} + +/* + * Push buffered characters whether they were just recently buffered or waiting + * on a blocked hypervisor. Call this function with hp->lock held. + */ +static int hvc_push(struct hvc_struct *hp) +{ + int n; + + n = hp->ops->put_chars(hp->vtermno, hp->outbuf, hp->n_outbuf); + if (n <= 0) { + if (n == 0) { + hp->do_wakeup = 1; + return 0; + } + /* throw away output on error; this happens when + there is no session connected to the vterm. */ + hp->n_outbuf = 0; + } else + hp->n_outbuf -= n; + if (hp->n_outbuf > 0) + memmove(hp->outbuf, hp->outbuf + n, hp->n_outbuf); + else + hp->do_wakeup = 1; + + return n; +} + +static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + struct hvc_struct *hp = tty->driver_data; + unsigned long flags; + int rsize, written = 0; + + /* This write was probably executed during a tty close. */ + if (!hp) + return -EPIPE; + + if (hp->count <= 0) + return -EIO; + + spin_lock_irqsave(&hp->lock, flags); + + /* Push pending writes */ + if (hp->n_outbuf > 0) + hvc_push(hp); + + while (count > 0 && (rsize = hp->outbuf_size - hp->n_outbuf) > 0) { + if (rsize > count) + rsize = count; + memcpy(hp->outbuf + hp->n_outbuf, buf, rsize); + count -= rsize; + buf += rsize; + hp->n_outbuf += rsize; + written += rsize; + hvc_push(hp); + } + spin_unlock_irqrestore(&hp->lock, flags); + + /* + * Racy, but harmless, kick thread if there is still pending data. + */ + if (hp->n_outbuf) + hvc_kick(); + + return written; +} + +/** + * hvc_set_winsz() - Resize the hvc tty terminal window. + * @work: work structure. + * + * The routine shall not be called within an atomic context because it + * might sleep. + * + * Locking: hp->lock + */ +static void hvc_set_winsz(struct work_struct *work) +{ + struct hvc_struct *hp; + unsigned long hvc_flags; + struct tty_struct *tty; + struct winsize ws; + + hp = container_of(work, struct hvc_struct, tty_resize); + + spin_lock_irqsave(&hp->lock, hvc_flags); + if (!hp->tty) { + spin_unlock_irqrestore(&hp->lock, hvc_flags); + return; + } + ws = hp->ws; + tty = tty_kref_get(hp->tty); + spin_unlock_irqrestore(&hp->lock, hvc_flags); + + tty_do_resize(tty, &ws); + tty_kref_put(tty); +} + +/* + * This is actually a contract between the driver and the tty layer outlining + * how much write room the driver can guarantee will be sent OR BUFFERED. This + * driver MUST honor the return value. + */ +static int hvc_write_room(struct tty_struct *tty) +{ + struct hvc_struct *hp = tty->driver_data; + + if (!hp) + return -1; + + return hp->outbuf_size - hp->n_outbuf; +} + +static int hvc_chars_in_buffer(struct tty_struct *tty) +{ + struct hvc_struct *hp = tty->driver_data; + + if (!hp) + return 0; + return hp->n_outbuf; +} + +/* + * timeout will vary between the MIN and MAX values defined here. By default + * and during console activity we will use a default MIN_TIMEOUT of 10. When + * the console is idle, we increase the timeout value on each pass through + * msleep until we reach the max. This may be noticeable as a brief (average + * one second) delay on the console before the console responds to input when + * there has been no input for some time. + */ +#define MIN_TIMEOUT (10) +#define MAX_TIMEOUT (2000) +static u32 timeout = MIN_TIMEOUT; + +#define HVC_POLL_READ 0x00000001 +#define HVC_POLL_WRITE 0x00000002 + +int hvc_poll(struct hvc_struct *hp) +{ + struct tty_struct *tty; + int i, n, poll_mask = 0; + char buf[N_INBUF] __ALIGNED__; + unsigned long flags; + int read_total = 0; + int written_total = 0; + + spin_lock_irqsave(&hp->lock, flags); + + /* Push pending writes */ + if (hp->n_outbuf > 0) + written_total = hvc_push(hp); + + /* Reschedule us if still some write pending */ + if (hp->n_outbuf > 0) { + poll_mask |= HVC_POLL_WRITE; + /* If hvc_push() was not able to write, sleep a few msecs */ + timeout = (written_total) ? 0 : MIN_TIMEOUT; + } + + /* No tty attached, just skip */ + tty = tty_kref_get(hp->tty); + if (tty == NULL) + goto bail; + + /* Now check if we can get data (are we throttled ?) */ + if (test_bit(TTY_THROTTLED, &tty->flags)) + goto throttled; + + /* If we aren't notifier driven and aren't throttled, we always + * request a reschedule + */ + if (!hp->irq_requested) + poll_mask |= HVC_POLL_READ; + + /* Read data if any */ + for (;;) { + int count = tty_buffer_request_room(tty, N_INBUF); + + /* If flip is full, just reschedule a later read */ + if (count == 0) { + poll_mask |= HVC_POLL_READ; + break; + } + + n = hp->ops->get_chars(hp->vtermno, buf, count); + if (n <= 0) { + /* Hangup the tty when disconnected from host */ + if (n == -EPIPE) { + spin_unlock_irqrestore(&hp->lock, flags); + tty_hangup(tty); + spin_lock_irqsave(&hp->lock, flags); + } else if ( n == -EAGAIN ) { + /* + * Some back-ends can only ensure a certain min + * num of bytes read, which may be > 'count'. + * Let the tty clear the flip buff to make room. + */ + poll_mask |= HVC_POLL_READ; + } + break; + } + for (i = 0; i < n; ++i) { +#ifdef CONFIG_MAGIC_SYSRQ + if (hp->index == hvc_console.index) { + /* Handle the SysRq Hack */ + /* XXX should support a sequence */ + if (buf[i] == '\x0f') { /* ^O */ + /* if ^O is pressed again, reset + * sysrq_pressed and flip ^O char */ + sysrq_pressed = !sysrq_pressed; + if (sysrq_pressed) + continue; + } else if (sysrq_pressed) { + handle_sysrq(buf[i]); + sysrq_pressed = 0; + continue; + } + } +#endif /* CONFIG_MAGIC_SYSRQ */ + tty_insert_flip_char(tty, buf[i], 0); + } + + read_total += n; + } + throttled: + /* Wakeup write queue if necessary */ + if (hp->do_wakeup) { + hp->do_wakeup = 0; + tty_wakeup(tty); + } + bail: + spin_unlock_irqrestore(&hp->lock, flags); + + if (read_total) { + /* Activity is occurring, so reset the polling backoff value to + a minimum for performance. */ + timeout = MIN_TIMEOUT; + + tty_flip_buffer_push(tty); + } + if (tty) + tty_kref_put(tty); + + return poll_mask; +} +EXPORT_SYMBOL_GPL(hvc_poll); + +/** + * __hvc_resize() - Update terminal window size information. + * @hp: HVC console pointer + * @ws: Terminal window size structure + * + * Stores the specified window size information in the hvc structure of @hp. + * The function schedule the tty resize update. + * + * Locking: Locking free; the function MUST be called holding hp->lock + */ +void __hvc_resize(struct hvc_struct *hp, struct winsize ws) +{ + hp->ws = ws; + schedule_work(&hp->tty_resize); +} +EXPORT_SYMBOL_GPL(__hvc_resize); + +/* + * This kthread is either polling or interrupt driven. This is determined by + * calling hvc_poll() who determines whether a console adapter support + * interrupts. + */ +static int khvcd(void *unused) +{ + int poll_mask; + struct hvc_struct *hp; + + set_freezable(); + do { + poll_mask = 0; + hvc_kicked = 0; + try_to_freeze(); + wmb(); + if (!cpus_are_in_xmon()) { + spin_lock(&hvc_structs_lock); + list_for_each_entry(hp, &hvc_structs, next) { + poll_mask |= hvc_poll(hp); + } + spin_unlock(&hvc_structs_lock); + } else + poll_mask |= HVC_POLL_READ; + if (hvc_kicked) + continue; + set_current_state(TASK_INTERRUPTIBLE); + if (!hvc_kicked) { + if (poll_mask == 0) + schedule(); + else { + if (timeout < MAX_TIMEOUT) + timeout += (timeout >> 6) + 1; + + msleep_interruptible(timeout); + } + } + __set_current_state(TASK_RUNNING); + } while (!kthread_should_stop()); + + return 0; +} + +static const struct tty_operations hvc_ops = { + .open = hvc_open, + .close = hvc_close, + .write = hvc_write, + .hangup = hvc_hangup, + .unthrottle = hvc_unthrottle, + .write_room = hvc_write_room, + .chars_in_buffer = hvc_chars_in_buffer, +}; + +struct hvc_struct *hvc_alloc(uint32_t vtermno, int data, + const struct hv_ops *ops, + int outbuf_size) +{ + struct hvc_struct *hp; + int i; + + /* We wait until a driver actually comes along */ + if (!hvc_driver) { + int err = hvc_init(); + if (err) + return ERR_PTR(err); + } + + hp = kzalloc(ALIGN(sizeof(*hp), sizeof(long)) + outbuf_size, + GFP_KERNEL); + if (!hp) + return ERR_PTR(-ENOMEM); + + hp->vtermno = vtermno; + hp->data = data; + hp->ops = ops; + hp->outbuf_size = outbuf_size; + hp->outbuf = &((char *)hp)[ALIGN(sizeof(*hp), sizeof(long))]; + + kref_init(&hp->kref); + + INIT_WORK(&hp->tty_resize, hvc_set_winsz); + spin_lock_init(&hp->lock); + spin_lock(&hvc_structs_lock); + + /* + * find index to use: + * see if this vterm id matches one registered for console. + */ + for (i=0; i < MAX_NR_HVC_CONSOLES; i++) + if (vtermnos[i] == hp->vtermno && + cons_ops[i] == hp->ops) + break; + + /* no matching slot, just use a counter */ + if (i >= MAX_NR_HVC_CONSOLES) + i = ++last_hvc; + + hp->index = i; + + list_add_tail(&(hp->next), &hvc_structs); + spin_unlock(&hvc_structs_lock); + + return hp; +} +EXPORT_SYMBOL_GPL(hvc_alloc); + +int hvc_remove(struct hvc_struct *hp) +{ + unsigned long flags; + struct tty_struct *tty; + + spin_lock_irqsave(&hp->lock, flags); + tty = tty_kref_get(hp->tty); + + if (hp->index < MAX_NR_HVC_CONSOLES) + vtermnos[hp->index] = -1; + + /* Don't whack hp->irq because tty_hangup() will need to free the irq. */ + + spin_unlock_irqrestore(&hp->lock, flags); + + /* + * We 'put' the instance that was grabbed when the kref instance + * was initialized using kref_init(). Let the last holder of this + * kref cause it to be removed, which will probably be the tty_vhangup + * below. + */ + kref_put(&hp->kref, destroy_hvc_struct); + + /* + * This function call will auto chain call hvc_hangup. + */ + if (tty) { + tty_vhangup(tty); + tty_kref_put(tty); + } + return 0; +} +EXPORT_SYMBOL_GPL(hvc_remove); + +/* Driver initialization: called as soon as someone uses hvc_alloc(). */ +static int hvc_init(void) +{ + struct tty_driver *drv; + int err; + + /* We need more than hvc_count adapters due to hotplug additions. */ + drv = alloc_tty_driver(HVC_ALLOC_TTY_ADAPTERS); + if (!drv) { + err = -ENOMEM; + goto out; + } + + drv->owner = THIS_MODULE; + drv->driver_name = "hvc"; + drv->name = "hvc"; + drv->major = HVC_MAJOR; + drv->minor_start = HVC_MINOR; + drv->type = TTY_DRIVER_TYPE_SYSTEM; + drv->init_termios = tty_std_termios; + drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS; + tty_set_operations(drv, &hvc_ops); + + /* Always start the kthread because there can be hotplug vty adapters + * added later. */ + hvc_task = kthread_run(khvcd, NULL, "khvcd"); + if (IS_ERR(hvc_task)) { + printk(KERN_ERR "Couldn't create kthread for console.\n"); + err = PTR_ERR(hvc_task); + goto put_tty; + } + + err = tty_register_driver(drv); + if (err) { + printk(KERN_ERR "Couldn't register hvc console driver\n"); + goto stop_thread; + } + + /* + * Make sure tty is fully registered before allowing it to be + * found by hvc_console_device. + */ + smp_mb(); + hvc_driver = drv; + return 0; + +stop_thread: + kthread_stop(hvc_task); + hvc_task = NULL; +put_tty: + put_tty_driver(drv); +out: + return err; +} + +/* This isn't particularly necessary due to this being a console driver + * but it is nice to be thorough. + */ +static void __exit hvc_exit(void) +{ + if (hvc_driver) { + kthread_stop(hvc_task); + + tty_unregister_driver(hvc_driver); + /* return tty_struct instances allocated in hvc_init(). */ + put_tty_driver(hvc_driver); + unregister_console(&hvc_console); + } +} +module_exit(hvc_exit); diff --git a/drivers/tty/hvc/hvc_console.h b/drivers/tty/hvc/hvc_console.h new file mode 100644 index 000000000000..54381eba4e4a --- /dev/null +++ b/drivers/tty/hvc/hvc_console.h @@ -0,0 +1,119 @@ +/* + * hvc_console.h + * Copyright (C) 2005 IBM Corporation + * + * Author(s): + * Ryan S. Arnold + * + * hvc_console header information: + * moved here from arch/powerpc/include/asm/hvconsole.h + * and drivers/char/hvc_console.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef HVC_CONSOLE_H +#define HVC_CONSOLE_H +#include +#include +#include + +/* + * This is the max number of console adapters that can/will be found as + * console devices on first stage console init. Any number beyond this range + * can't be used as a console device but is still a valid tty device. + */ +#define MAX_NR_HVC_CONSOLES 16 + +/* + * The Linux TTY code does not support dynamic addition of tty derived devices + * so we need to know how many tty devices we might need when space is allocated + * for the tty device. Since this driver supports hotplug of vty adapters we + * need to make sure we have enough allocated. + */ +#define HVC_ALLOC_TTY_ADAPTERS 8 + +struct hvc_struct { + spinlock_t lock; + int index; + struct tty_struct *tty; + int count; + int do_wakeup; + char *outbuf; + int outbuf_size; + int n_outbuf; + uint32_t vtermno; + const struct hv_ops *ops; + int irq_requested; + int data; + struct winsize ws; + struct work_struct tty_resize; + struct list_head next; + struct kref kref; /* ref count & hvc_struct lifetime */ +}; + +/* implemented by a low level driver */ +struct hv_ops { + int (*get_chars)(uint32_t vtermno, char *buf, int count); + int (*put_chars)(uint32_t vtermno, const char *buf, int count); + + /* Callbacks for notification. Called in open, close and hangup */ + int (*notifier_add)(struct hvc_struct *hp, int irq); + void (*notifier_del)(struct hvc_struct *hp, int irq); + void (*notifier_hangup)(struct hvc_struct *hp, int irq); +}; + +/* Register a vterm and a slot index for use as a console (console_init) */ +extern int hvc_instantiate(uint32_t vtermno, int index, + const struct hv_ops *ops); + +/* register a vterm for hvc tty operation (module_init or hotplug add) */ +extern struct hvc_struct * hvc_alloc(uint32_t vtermno, int data, + const struct hv_ops *ops, int outbuf_size); +/* remove a vterm from hvc tty operation (module_exit or hotplug remove) */ +extern int hvc_remove(struct hvc_struct *hp); + +/* data available */ +int hvc_poll(struct hvc_struct *hp); +void hvc_kick(void); + +/* Resize hvc tty terminal window */ +extern void __hvc_resize(struct hvc_struct *hp, struct winsize ws); + +static inline void hvc_resize(struct hvc_struct *hp, struct winsize ws) +{ + unsigned long flags; + + spin_lock_irqsave(&hp->lock, flags); + __hvc_resize(hp, ws); + spin_unlock_irqrestore(&hp->lock, flags); +} + +/* default notifier for irq based notification */ +extern int notifier_add_irq(struct hvc_struct *hp, int data); +extern void notifier_del_irq(struct hvc_struct *hp, int data); +extern void notifier_hangup_irq(struct hvc_struct *hp, int data); + + +#if defined(CONFIG_XMON) && defined(CONFIG_SMP) +#include +#else +static inline int cpus_are_in_xmon(void) +{ + return 0; +} +#endif + +#endif // HVC_CONSOLE_H diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c new file mode 100644 index 000000000000..6470f63deb4b --- /dev/null +++ b/drivers/tty/hvc/hvc_dcc.c @@ -0,0 +1,133 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include "hvc_console.h" + +/* DCC Status Bits */ +#define DCC_STATUS_RX (1 << 30) +#define DCC_STATUS_TX (1 << 29) + +static inline u32 __dcc_getstatus(void) +{ + u32 __ret; + + asm("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg" + : "=r" (__ret) : : "cc"); + + return __ret; +} + + +#if defined(CONFIG_CPU_V7) +static inline char __dcc_getchar(void) +{ + char __c; + + asm("get_wait: mrc p14, 0, pc, c0, c1, 0 \n\ + bne get_wait \n\ + mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" + : "=r" (__c) : : "cc"); + + return __c; +} +#else +static inline char __dcc_getchar(void) +{ + char __c; + + asm("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" + : "=r" (__c)); + + return __c; +} +#endif + +#if defined(CONFIG_CPU_V7) +static inline void __dcc_putchar(char c) +{ + asm("put_wait: mrc p14, 0, pc, c0, c1, 0 \n\ + bcs put_wait \n\ + mcr p14, 0, %0, c0, c5, 0 " + : : "r" (c) : "cc"); +} +#else +static inline void __dcc_putchar(char c) +{ + asm("mcr p14, 0, %0, c0, c5, 0 @ write a char" + : /* no output register */ + : "r" (c)); +} +#endif + +static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count) +{ + int i; + + for (i = 0; i < count; i++) { + while (__dcc_getstatus() & DCC_STATUS_TX) + cpu_relax(); + + __dcc_putchar((char)(buf[i] & 0xFF)); + } + + return count; +} + +static int hvc_dcc_get_chars(uint32_t vt, char *buf, int count) +{ + int i; + + for (i = 0; i < count; ++i) { + int c = -1; + + if (__dcc_getstatus() & DCC_STATUS_RX) + c = __dcc_getchar(); + if (c < 0) + break; + buf[i] = c; + } + + return i; +} + +static const struct hv_ops hvc_dcc_get_put_ops = { + .get_chars = hvc_dcc_get_chars, + .put_chars = hvc_dcc_put_chars, +}; + +static int __init hvc_dcc_console_init(void) +{ + hvc_instantiate(0, 0, &hvc_dcc_get_put_ops); + return 0; +} +console_initcall(hvc_dcc_console_init); + +static int __init hvc_dcc_init(void) +{ + hvc_alloc(0, 0, &hvc_dcc_get_put_ops, 128); + return 0; +} +device_initcall(hvc_dcc_init); diff --git a/drivers/tty/hvc/hvc_irq.c b/drivers/tty/hvc/hvc_irq.c new file mode 100644 index 000000000000..2623e177e8d6 --- /dev/null +++ b/drivers/tty/hvc/hvc_irq.c @@ -0,0 +1,49 @@ +/* + * Copyright IBM Corp. 2001,2008 + * + * This file contains the IRQ specific code for hvc_console + * + */ + +#include + +#include "hvc_console.h" + +static irqreturn_t hvc_handle_interrupt(int irq, void *dev_instance) +{ + /* if hvc_poll request a repoll, then kick the hvcd thread */ + if (hvc_poll(dev_instance)) + hvc_kick(); + return IRQ_HANDLED; +} + +/* + * For IRQ based systems these callbacks can be used + */ +int notifier_add_irq(struct hvc_struct *hp, int irq) +{ + int rc; + + if (!irq) { + hp->irq_requested = 0; + return 0; + } + rc = request_irq(irq, hvc_handle_interrupt, IRQF_DISABLED, + "hvc_console", hp); + if (!rc) + hp->irq_requested = 1; + return rc; +} + +void notifier_del_irq(struct hvc_struct *hp, int irq) +{ + if (!hp->irq_requested) + return; + free_irq(irq, hp); + hp->irq_requested = 0; +} + +void notifier_hangup_irq(struct hvc_struct *hp, int irq) +{ + notifier_del_irq(hp, irq); +} diff --git a/drivers/tty/hvc/hvc_iseries.c b/drivers/tty/hvc/hvc_iseries.c new file mode 100644 index 000000000000..21c54955084e --- /dev/null +++ b/drivers/tty/hvc/hvc_iseries.c @@ -0,0 +1,598 @@ +/* + * iSeries vio driver interface to hvc_console.c + * + * This code is based heavily on hvc_vio.c and viocons.c + * + * Copyright (C) 2006 Stephen Rothwell, IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "hvc_console.h" + +#define VTTY_PORTS 10 + +static DEFINE_SPINLOCK(consolelock); +static DEFINE_SPINLOCK(consoleloglock); + +static const char hvc_driver_name[] = "hvc_console"; + +#define IN_BUF_SIZE 200 + +/* + * Our port information. + */ +static struct port_info { + HvLpIndex lp; + u64 seq; /* sequence number of last HV send */ + u64 ack; /* last ack from HV */ + struct hvc_struct *hp; + int in_start; + int in_end; + unsigned char in_buf[IN_BUF_SIZE]; +} port_info[VTTY_PORTS] = { + [ 0 ... VTTY_PORTS - 1 ] = { + .lp = HvLpIndexInvalid + } +}; + +#define viochar_is_console(pi) ((pi) == &port_info[0]) + +static struct vio_device_id hvc_driver_table[] __devinitdata = { + {"serial", "IBM,iSeries-vty"}, + { "", "" } +}; +MODULE_DEVICE_TABLE(vio, hvc_driver_table); + +static void hvlog(char *fmt, ...) +{ + int i; + unsigned long flags; + va_list args; + static char buf[256]; + + spin_lock_irqsave(&consoleloglock, flags); + va_start(args, fmt); + i = vscnprintf(buf, sizeof(buf) - 1, fmt, args); + va_end(args); + buf[i++] = '\r'; + HvCall_writeLogBuffer(buf, i); + spin_unlock_irqrestore(&consoleloglock, flags); +} + +/* + * Initialize the common fields in a charLpEvent + */ +static void init_data_event(struct viocharlpevent *viochar, HvLpIndex lp) +{ + struct HvLpEvent *hev = &viochar->event; + + memset(viochar, 0, sizeof(struct viocharlpevent)); + + hev->flags = HV_LP_EVENT_VALID | HV_LP_EVENT_DEFERRED_ACK | + HV_LP_EVENT_INT; + hev->xType = HvLpEvent_Type_VirtualIo; + hev->xSubtype = viomajorsubtype_chario | viochardata; + hev->xSourceLp = HvLpConfig_getLpIndex(); + hev->xTargetLp = lp; + hev->xSizeMinus1 = sizeof(struct viocharlpevent); + hev->xSourceInstanceId = viopath_sourceinst(lp); + hev->xTargetInstanceId = viopath_targetinst(lp); +} + +static int get_chars(uint32_t vtermno, char *buf, int count) +{ + struct port_info *pi; + int n = 0; + unsigned long flags; + + if (vtermno >= VTTY_PORTS) + return -EINVAL; + if (count == 0) + return 0; + + pi = &port_info[vtermno]; + spin_lock_irqsave(&consolelock, flags); + + if (pi->in_end == 0) + goto done; + + n = pi->in_end - pi->in_start; + if (n > count) + n = count; + memcpy(buf, &pi->in_buf[pi->in_start], n); + pi->in_start += n; + if (pi->in_start == pi->in_end) { + pi->in_start = 0; + pi->in_end = 0; + } +done: + spin_unlock_irqrestore(&consolelock, flags); + return n; +} + +static int put_chars(uint32_t vtermno, const char *buf, int count) +{ + struct viocharlpevent *viochar; + struct port_info *pi; + HvLpEvent_Rc hvrc; + unsigned long flags; + int sent = 0; + + if (vtermno >= VTTY_PORTS) + return -EINVAL; + + pi = &port_info[vtermno]; + + spin_lock_irqsave(&consolelock, flags); + + if (viochar_is_console(pi) && !viopath_isactive(pi->lp)) { + HvCall_writeLogBuffer(buf, count); + sent = count; + goto done; + } + + viochar = vio_get_event_buffer(viomajorsubtype_chario); + if (viochar == NULL) { + hvlog("\n\rviocons: Can't get viochar buffer."); + goto done; + } + + while ((count > 0) && ((pi->seq - pi->ack) < VIOCHAR_WINDOW)) { + int len; + + len = (count > VIOCHAR_MAX_DATA) ? VIOCHAR_MAX_DATA : count; + + if (viochar_is_console(pi)) + HvCall_writeLogBuffer(buf, len); + + init_data_event(viochar, pi->lp); + + viochar->len = len; + viochar->event.xCorrelationToken = pi->seq++; + viochar->event.xSizeMinus1 = + offsetof(struct viocharlpevent, data) + len; + + memcpy(viochar->data, buf, len); + + hvrc = HvCallEvent_signalLpEvent(&viochar->event); + if (hvrc) + hvlog("\n\rerror sending event! return code %d\n\r", + (int)hvrc); + sent += len; + count -= len; + buf += len; + } + + vio_free_event_buffer(viomajorsubtype_chario, viochar); +done: + spin_unlock_irqrestore(&consolelock, flags); + return sent; +} + +static const struct hv_ops hvc_get_put_ops = { + .get_chars = get_chars, + .put_chars = put_chars, + .notifier_add = notifier_add_irq, + .notifier_del = notifier_del_irq, + .notifier_hangup = notifier_hangup_irq, +}; + +static int __devinit hvc_vio_probe(struct vio_dev *vdev, + const struct vio_device_id *id) +{ + struct hvc_struct *hp; + struct port_info *pi; + + /* probed with invalid parameters. */ + if (!vdev || !id) + return -EPERM; + + if (vdev->unit_address >= VTTY_PORTS) + return -ENODEV; + + pi = &port_info[vdev->unit_address]; + + hp = hvc_alloc(vdev->unit_address, vdev->irq, &hvc_get_put_ops, + VIOCHAR_MAX_DATA); + if (IS_ERR(hp)) + return PTR_ERR(hp); + pi->hp = hp; + dev_set_drvdata(&vdev->dev, pi); + + return 0; +} + +static int __devexit hvc_vio_remove(struct vio_dev *vdev) +{ + struct port_info *pi = dev_get_drvdata(&vdev->dev); + struct hvc_struct *hp = pi->hp; + + return hvc_remove(hp); +} + +static struct vio_driver hvc_vio_driver = { + .id_table = hvc_driver_table, + .probe = hvc_vio_probe, + .remove = __devexit_p(hvc_vio_remove), + .driver = { + .name = hvc_driver_name, + .owner = THIS_MODULE, + } +}; + +static void hvc_open_event(struct HvLpEvent *event) +{ + unsigned long flags; + struct viocharlpevent *cevent = (struct viocharlpevent *)event; + u8 port = cevent->virtual_device; + struct port_info *pi; + int reject = 0; + + if (hvlpevent_is_ack(event)) { + if (port >= VTTY_PORTS) + return; + + spin_lock_irqsave(&consolelock, flags); + + pi = &port_info[port]; + if (event->xRc == HvLpEvent_Rc_Good) { + pi->seq = pi->ack = 0; + /* + * This line allows connections from the primary + * partition but once one is connected from the + * primary partition nothing short of a reboot + * of linux will allow access from the hosting + * partition again without a required iSeries fix. + */ + pi->lp = event->xTargetLp; + } + + spin_unlock_irqrestore(&consolelock, flags); + if (event->xRc != HvLpEvent_Rc_Good) + printk(KERN_WARNING + "hvc: handle_open_event: event->xRc == (%d).\n", + event->xRc); + + if (event->xCorrelationToken != 0) { + atomic_t *aptr= (atomic_t *)event->xCorrelationToken; + atomic_set(aptr, 1); + } else + printk(KERN_WARNING + "hvc: weird...got open ack without atomic\n"); + return; + } + + /* This had better require an ack, otherwise complain */ + if (!hvlpevent_need_ack(event)) { + printk(KERN_WARNING "hvc: viocharopen without ack bit!\n"); + return; + } + + spin_lock_irqsave(&consolelock, flags); + + /* Make sure this is a good virtual tty */ + if (port >= VTTY_PORTS) { + event->xRc = HvLpEvent_Rc_SubtypeError; + cevent->subtype_result_code = viorc_openRejected; + /* + * Flag state here since we can't printk while holding + * the consolelock spinlock. + */ + reject = 1; + } else { + pi = &port_info[port]; + if ((pi->lp != HvLpIndexInvalid) && + (pi->lp != event->xSourceLp)) { + /* + * If this is tty is already connected to a different + * partition, fail. + */ + event->xRc = HvLpEvent_Rc_SubtypeError; + cevent->subtype_result_code = viorc_openRejected; + reject = 2; + } else { + pi->lp = event->xSourceLp; + event->xRc = HvLpEvent_Rc_Good; + cevent->subtype_result_code = viorc_good; + pi->seq = pi->ack = 0; + } + } + + spin_unlock_irqrestore(&consolelock, flags); + + if (reject == 1) + printk(KERN_WARNING "hvc: open rejected: bad virtual tty.\n"); + else if (reject == 2) + printk(KERN_WARNING "hvc: open rejected: console in exclusive " + "use by another partition.\n"); + + /* Return the acknowledgement */ + HvCallEvent_ackLpEvent(event); +} + +/* + * Handle a close charLpEvent. This should ONLY be an Interrupt because the + * virtual console should never actually issue a close event to the hypervisor + * because the virtual console never goes away. A close event coming from the + * hypervisor simply means that there are no client consoles connected to the + * virtual console. + */ +static void hvc_close_event(struct HvLpEvent *event) +{ + unsigned long flags; + struct viocharlpevent *cevent = (struct viocharlpevent *)event; + u8 port = cevent->virtual_device; + + if (!hvlpevent_is_int(event)) { + printk(KERN_WARNING + "hvc: got unexpected close acknowledgement\n"); + return; + } + + if (port >= VTTY_PORTS) { + printk(KERN_WARNING + "hvc: close message from invalid virtual device.\n"); + return; + } + + /* For closes, just mark the console partition invalid */ + spin_lock_irqsave(&consolelock, flags); + + if (port_info[port].lp == event->xSourceLp) + port_info[port].lp = HvLpIndexInvalid; + + spin_unlock_irqrestore(&consolelock, flags); +} + +static void hvc_data_event(struct HvLpEvent *event) +{ + unsigned long flags; + struct viocharlpevent *cevent = (struct viocharlpevent *)event; + struct port_info *pi; + int n; + u8 port = cevent->virtual_device; + + if (port >= VTTY_PORTS) { + printk(KERN_WARNING "hvc: data on invalid virtual device %d\n", + port); + return; + } + if (cevent->len == 0) + return; + + /* + * Change 05/01/2003 - Ryan Arnold: If a partition other than + * the current exclusive partition tries to send us data + * events then just drop them on the floor because we don't + * want his stinking data. He isn't authorized to receive + * data because he wasn't the first one to get the console, + * therefore he shouldn't be allowed to send data either. + * This will work without an iSeries fix. + */ + pi = &port_info[port]; + if (pi->lp != event->xSourceLp) + return; + + spin_lock_irqsave(&consolelock, flags); + + n = IN_BUF_SIZE - pi->in_end; + if (n > cevent->len) + n = cevent->len; + if (n > 0) { + memcpy(&pi->in_buf[pi->in_end], cevent->data, n); + pi->in_end += n; + } + spin_unlock_irqrestore(&consolelock, flags); + if (n == 0) + printk(KERN_WARNING "hvc: input buffer overflow\n"); +} + +static void hvc_ack_event(struct HvLpEvent *event) +{ + struct viocharlpevent *cevent = (struct viocharlpevent *)event; + unsigned long flags; + u8 port = cevent->virtual_device; + + if (port >= VTTY_PORTS) { + printk(KERN_WARNING "hvc: data on invalid virtual device\n"); + return; + } + + spin_lock_irqsave(&consolelock, flags); + port_info[port].ack = event->xCorrelationToken; + spin_unlock_irqrestore(&consolelock, flags); +} + +static void hvc_config_event(struct HvLpEvent *event) +{ + struct viocharlpevent *cevent = (struct viocharlpevent *)event; + + if (cevent->data[0] == 0x01) + printk(KERN_INFO "hvc: window resized to %d: %d: %d: %d\n", + cevent->data[1], cevent->data[2], + cevent->data[3], cevent->data[4]); + else + printk(KERN_WARNING "hvc: unknown config event\n"); +} + +static void hvc_handle_event(struct HvLpEvent *event) +{ + int charminor; + + if (event == NULL) + return; + + charminor = event->xSubtype & VIOMINOR_SUBTYPE_MASK; + switch (charminor) { + case viocharopen: + hvc_open_event(event); + break; + case viocharclose: + hvc_close_event(event); + break; + case viochardata: + hvc_data_event(event); + break; + case viocharack: + hvc_ack_event(event); + break; + case viocharconfig: + hvc_config_event(event); + break; + default: + if (hvlpevent_is_int(event) && hvlpevent_need_ack(event)) { + event->xRc = HvLpEvent_Rc_InvalidSubtype; + HvCallEvent_ackLpEvent(event); + } + } +} + +static int __init send_open(HvLpIndex remoteLp, void *sem) +{ + return HvCallEvent_signalLpEventFast(remoteLp, + HvLpEvent_Type_VirtualIo, + viomajorsubtype_chario | viocharopen, + HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, + viopath_sourceinst(remoteLp), + viopath_targetinst(remoteLp), + (u64)(unsigned long)sem, VIOVERSION << 16, + 0, 0, 0, 0); +} + +static int __init hvc_vio_init(void) +{ + atomic_t wait_flag; + int rc; + + if (!firmware_has_feature(FW_FEATURE_ISERIES)) + return -EIO; + + /* +2 for fudge */ + rc = viopath_open(HvLpConfig_getPrimaryLpIndex(), + viomajorsubtype_chario, VIOCHAR_WINDOW + 2); + if (rc) + printk(KERN_WARNING "hvc: error opening to primary %d\n", rc); + + if (viopath_hostLp == HvLpIndexInvalid) + vio_set_hostlp(); + + /* + * And if the primary is not the same as the hosting LP, open to the + * hosting lp + */ + if ((viopath_hostLp != HvLpIndexInvalid) && + (viopath_hostLp != HvLpConfig_getPrimaryLpIndex())) { + printk(KERN_INFO "hvc: open path to hosting (%d)\n", + viopath_hostLp); + rc = viopath_open(viopath_hostLp, viomajorsubtype_chario, + VIOCHAR_WINDOW + 2); /* +2 for fudge */ + if (rc) + printk(KERN_WARNING + "error opening to partition %d: %d\n", + viopath_hostLp, rc); + } + + if (vio_setHandler(viomajorsubtype_chario, hvc_handle_event) < 0) + printk(KERN_WARNING + "hvc: error seting handler for console events!\n"); + + /* + * First, try to open the console to the hosting lp. + * Wait on a semaphore for the response. + */ + atomic_set(&wait_flag, 0); + if ((viopath_isactive(viopath_hostLp)) && + (send_open(viopath_hostLp, &wait_flag) == 0)) { + printk(KERN_INFO "hvc: hosting partition %d\n", viopath_hostLp); + while (atomic_read(&wait_flag) == 0) + mb(); + atomic_set(&wait_flag, 0); + } + + /* + * If we don't have an active console, try the primary + */ + if ((!viopath_isactive(port_info[0].lp)) && + (viopath_isactive(HvLpConfig_getPrimaryLpIndex())) && + (send_open(HvLpConfig_getPrimaryLpIndex(), &wait_flag) == 0)) { + printk(KERN_INFO "hvc: opening console to primary partition\n"); + while (atomic_read(&wait_flag) == 0) + mb(); + } + + /* Register as a vio device to receive callbacks */ + rc = vio_register_driver(&hvc_vio_driver); + + return rc; +} +module_init(hvc_vio_init); /* after drivers/char/hvc_console.c */ + +static void __exit hvc_vio_exit(void) +{ + vio_unregister_driver(&hvc_vio_driver); +} +module_exit(hvc_vio_exit); + +/* the device tree order defines our numbering */ +static int __init hvc_find_vtys(void) +{ + struct device_node *vty; + int num_found = 0; + + for (vty = of_find_node_by_name(NULL, "vty"); vty != NULL; + vty = of_find_node_by_name(vty, "vty")) { + const uint32_t *vtermno; + + /* We have statically defined space for only a certain number + * of console adapters. + */ + if ((num_found >= MAX_NR_HVC_CONSOLES) || + (num_found >= VTTY_PORTS)) { + of_node_put(vty); + break; + } + + vtermno = of_get_property(vty, "reg", NULL); + if (!vtermno) + continue; + + if (!of_device_is_compatible(vty, "IBM,iSeries-vty")) + continue; + + if (num_found == 0) + add_preferred_console("hvc", 0, NULL); + hvc_instantiate(*vtermno, num_found, &hvc_get_put_ops); + ++num_found; + } + + return num_found; +} +console_initcall(hvc_find_vtys); diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c new file mode 100644 index 000000000000..c3425bb3a1f6 --- /dev/null +++ b/drivers/tty/hvc/hvc_iucv.c @@ -0,0 +1,1337 @@ +/* + * hvc_iucv.c - z/VM IUCV hypervisor console (HVC) device driver + * + * This HVC device driver provides terminal access using + * z/VM IUCV communication paths. + * + * Copyright IBM Corp. 2008, 2009 + * + * Author(s): Hendrik Brueckner + */ +#define KMSG_COMPONENT "hvc_iucv" +#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "hvc_console.h" + + +/* General device driver settings */ +#define HVC_IUCV_MAGIC 0xc9e4c3e5 +#define MAX_HVC_IUCV_LINES HVC_ALLOC_TTY_ADAPTERS +#define MEMPOOL_MIN_NR (PAGE_SIZE / sizeof(struct iucv_tty_buffer)/4) + +/* IUCV TTY message */ +#define MSG_VERSION 0x02 /* Message version */ +#define MSG_TYPE_ERROR 0x01 /* Error message */ +#define MSG_TYPE_TERMENV 0x02 /* Terminal environment variable */ +#define MSG_TYPE_TERMIOS 0x04 /* Terminal IO struct update */ +#define MSG_TYPE_WINSIZE 0x08 /* Terminal window size update */ +#define MSG_TYPE_DATA 0x10 /* Terminal data */ + +struct iucv_tty_msg { + u8 version; /* Message version */ + u8 type; /* Message type */ +#define MSG_MAX_DATALEN ((u16)(~0)) + u16 datalen; /* Payload length */ + u8 data[]; /* Payload buffer */ +} __attribute__((packed)); +#define MSG_SIZE(s) ((s) + offsetof(struct iucv_tty_msg, data)) + +enum iucv_state_t { + IUCV_DISCONN = 0, + IUCV_CONNECTED = 1, + IUCV_SEVERED = 2, +}; + +enum tty_state_t { + TTY_CLOSED = 0, + TTY_OPENED = 1, +}; + +struct hvc_iucv_private { + struct hvc_struct *hvc; /* HVC struct reference */ + u8 srv_name[8]; /* IUCV service name (ebcdic) */ + unsigned char is_console; /* Linux console usage flag */ + enum iucv_state_t iucv_state; /* IUCV connection status */ + enum tty_state_t tty_state; /* TTY status */ + struct iucv_path *path; /* IUCV path pointer */ + spinlock_t lock; /* hvc_iucv_private lock */ +#define SNDBUF_SIZE (PAGE_SIZE) /* must be < MSG_MAX_DATALEN */ + void *sndbuf; /* send buffer */ + size_t sndbuf_len; /* length of send buffer */ +#define QUEUE_SNDBUF_DELAY (HZ / 25) + struct delayed_work sndbuf_work; /* work: send iucv msg(s) */ + wait_queue_head_t sndbuf_waitq; /* wait for send completion */ + struct list_head tty_outqueue; /* outgoing IUCV messages */ + struct list_head tty_inqueue; /* incoming IUCV messages */ + struct device *dev; /* device structure */ +}; + +struct iucv_tty_buffer { + struct list_head list; /* list pointer */ + struct iucv_message msg; /* store an IUCV message */ + size_t offset; /* data buffer offset */ + struct iucv_tty_msg *mbuf; /* buffer to store input/output data */ +}; + +/* IUCV callback handler */ +static int hvc_iucv_path_pending(struct iucv_path *, u8[8], u8[16]); +static void hvc_iucv_path_severed(struct iucv_path *, u8[16]); +static void hvc_iucv_msg_pending(struct iucv_path *, struct iucv_message *); +static void hvc_iucv_msg_complete(struct iucv_path *, struct iucv_message *); + + +/* Kernel module parameter: use one terminal device as default */ +static unsigned long hvc_iucv_devices = 1; + +/* Array of allocated hvc iucv tty lines... */ +static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES]; +#define IUCV_HVC_CON_IDX (0) +/* List of z/VM user ID filter entries (struct iucv_vmid_filter) */ +#define MAX_VMID_FILTER (500) +static size_t hvc_iucv_filter_size; +static void *hvc_iucv_filter; +static const char *hvc_iucv_filter_string; +static DEFINE_RWLOCK(hvc_iucv_filter_lock); + +/* Kmem cache and mempool for iucv_tty_buffer elements */ +static struct kmem_cache *hvc_iucv_buffer_cache; +static mempool_t *hvc_iucv_mempool; + +/* IUCV handler callback functions */ +static struct iucv_handler hvc_iucv_handler = { + .path_pending = hvc_iucv_path_pending, + .path_severed = hvc_iucv_path_severed, + .message_complete = hvc_iucv_msg_complete, + .message_pending = hvc_iucv_msg_pending, +}; + + +/** + * hvc_iucv_get_private() - Return a struct hvc_iucv_private instance. + * @num: The HVC virtual terminal number (vtermno) + * + * This function returns the struct hvc_iucv_private instance that corresponds + * to the HVC virtual terminal number specified as parameter @num. + */ +struct hvc_iucv_private *hvc_iucv_get_private(uint32_t num) +{ + if ((num < HVC_IUCV_MAGIC) || (num - HVC_IUCV_MAGIC > hvc_iucv_devices)) + return NULL; + return hvc_iucv_table[num - HVC_IUCV_MAGIC]; +} + +/** + * alloc_tty_buffer() - Return a new struct iucv_tty_buffer element. + * @size: Size of the internal buffer used to store data. + * @flags: Memory allocation flags passed to mempool. + * + * This function allocates a new struct iucv_tty_buffer element and, optionally, + * allocates an internal data buffer with the specified size @size. + * The internal data buffer is always allocated with GFP_DMA which is + * required for receiving and sending data with IUCV. + * Note: The total message size arises from the internal buffer size and the + * members of the iucv_tty_msg structure. + * The function returns NULL if memory allocation has failed. + */ +static struct iucv_tty_buffer *alloc_tty_buffer(size_t size, gfp_t flags) +{ + struct iucv_tty_buffer *bufp; + + bufp = mempool_alloc(hvc_iucv_mempool, flags); + if (!bufp) + return NULL; + memset(bufp, 0, sizeof(*bufp)); + + if (size > 0) { + bufp->msg.length = MSG_SIZE(size); + bufp->mbuf = kmalloc(bufp->msg.length, flags | GFP_DMA); + if (!bufp->mbuf) { + mempool_free(bufp, hvc_iucv_mempool); + return NULL; + } + bufp->mbuf->version = MSG_VERSION; + bufp->mbuf->type = MSG_TYPE_DATA; + bufp->mbuf->datalen = (u16) size; + } + return bufp; +} + +/** + * destroy_tty_buffer() - destroy struct iucv_tty_buffer element. + * @bufp: Pointer to a struct iucv_tty_buffer element, SHALL NOT be NULL. + */ +static void destroy_tty_buffer(struct iucv_tty_buffer *bufp) +{ + kfree(bufp->mbuf); + mempool_free(bufp, hvc_iucv_mempool); +} + +/** + * destroy_tty_buffer_list() - call destroy_tty_buffer() for each list element. + * @list: List containing struct iucv_tty_buffer elements. + */ +static void destroy_tty_buffer_list(struct list_head *list) +{ + struct iucv_tty_buffer *ent, *next; + + list_for_each_entry_safe(ent, next, list, list) { + list_del(&ent->list); + destroy_tty_buffer(ent); + } +} + +/** + * hvc_iucv_write() - Receive IUCV message & write data to HVC buffer. + * @priv: Pointer to struct hvc_iucv_private + * @buf: HVC buffer for writing received terminal data. + * @count: HVC buffer size. + * @has_more_data: Pointer to an int variable. + * + * The function picks up pending messages from the input queue and receives + * the message data that is then written to the specified buffer @buf. + * If the buffer size @count is less than the data message size, the + * message is kept on the input queue and @has_more_data is set to 1. + * If all message data has been written, the message is removed from + * the input queue. + * + * The function returns the number of bytes written to the terminal, zero if + * there are no pending data messages available or if there is no established + * IUCV path. + * If the IUCV path has been severed, then -EPIPE is returned to cause a + * hang up (that is issued by the HVC layer). + */ +static int hvc_iucv_write(struct hvc_iucv_private *priv, + char *buf, int count, int *has_more_data) +{ + struct iucv_tty_buffer *rb; + int written; + int rc; + + /* immediately return if there is no IUCV connection */ + if (priv->iucv_state == IUCV_DISCONN) + return 0; + + /* if the IUCV path has been severed, return -EPIPE to inform the + * HVC layer to hang up the tty device. */ + if (priv->iucv_state == IUCV_SEVERED) + return -EPIPE; + + /* check if there are pending messages */ + if (list_empty(&priv->tty_inqueue)) + return 0; + + /* receive an iucv message and flip data to the tty (ldisc) */ + rb = list_first_entry(&priv->tty_inqueue, struct iucv_tty_buffer, list); + + written = 0; + if (!rb->mbuf) { /* message not yet received ... */ + /* allocate mem to store msg data; if no memory is available + * then leave the buffer on the list and re-try later */ + rb->mbuf = kmalloc(rb->msg.length, GFP_ATOMIC | GFP_DMA); + if (!rb->mbuf) + return -ENOMEM; + + rc = __iucv_message_receive(priv->path, &rb->msg, 0, + rb->mbuf, rb->msg.length, NULL); + switch (rc) { + case 0: /* Successful */ + break; + case 2: /* No message found */ + case 9: /* Message purged */ + break; + default: + written = -EIO; + } + /* remove buffer if an error has occured or received data + * is not correct */ + if (rc || (rb->mbuf->version != MSG_VERSION) || + (rb->msg.length != MSG_SIZE(rb->mbuf->datalen))) + goto out_remove_buffer; + } + + switch (rb->mbuf->type) { + case MSG_TYPE_DATA: + written = min_t(int, rb->mbuf->datalen - rb->offset, count); + memcpy(buf, rb->mbuf->data + rb->offset, written); + if (written < (rb->mbuf->datalen - rb->offset)) { + rb->offset += written; + *has_more_data = 1; + goto out_written; + } + break; + + case MSG_TYPE_WINSIZE: + if (rb->mbuf->datalen != sizeof(struct winsize)) + break; + /* The caller must ensure that the hvc is locked, which + * is the case when called from hvc_iucv_get_chars() */ + __hvc_resize(priv->hvc, *((struct winsize *) rb->mbuf->data)); + break; + + case MSG_TYPE_ERROR: /* ignored ... */ + case MSG_TYPE_TERMENV: /* ignored ... */ + case MSG_TYPE_TERMIOS: /* ignored ... */ + break; + } + +out_remove_buffer: + list_del(&rb->list); + destroy_tty_buffer(rb); + *has_more_data = !list_empty(&priv->tty_inqueue); + +out_written: + return written; +} + +/** + * hvc_iucv_get_chars() - HVC get_chars operation. + * @vtermno: HVC virtual terminal number. + * @buf: Pointer to a buffer to store data + * @count: Size of buffer available for writing + * + * The HVC thread calls this method to read characters from the back-end. + * If an IUCV communication path has been established, pending IUCV messages + * are received and data is copied into buffer @buf up to @count bytes. + * + * Locking: The routine gets called under an irqsave() spinlock; and + * the routine locks the struct hvc_iucv_private->lock to call + * helper functions. + */ +static int hvc_iucv_get_chars(uint32_t vtermno, char *buf, int count) +{ + struct hvc_iucv_private *priv = hvc_iucv_get_private(vtermno); + int written; + int has_more_data; + + if (count <= 0) + return 0; + + if (!priv) + return -ENODEV; + + spin_lock(&priv->lock); + has_more_data = 0; + written = hvc_iucv_write(priv, buf, count, &has_more_data); + spin_unlock(&priv->lock); + + /* if there are still messages on the queue... schedule another run */ + if (has_more_data) + hvc_kick(); + + return written; +} + +/** + * hvc_iucv_queue() - Buffer terminal data for sending. + * @priv: Pointer to struct hvc_iucv_private instance. + * @buf: Buffer containing data to send. + * @count: Size of buffer and amount of data to send. + * + * The function queues data for sending. To actually send the buffered data, + * a work queue function is scheduled (with QUEUE_SNDBUF_DELAY). + * The function returns the number of data bytes that has been buffered. + * + * If the device is not connected, data is ignored and the function returns + * @count. + * If the buffer is full, the function returns 0. + * If an existing IUCV communicaton path has been severed, -EPIPE is returned + * (that can be passed to HVC layer to cause a tty hangup). + */ +static int hvc_iucv_queue(struct hvc_iucv_private *priv, const char *buf, + int count) +{ + size_t len; + + if (priv->iucv_state == IUCV_DISCONN) + return count; /* ignore data */ + + if (priv->iucv_state == IUCV_SEVERED) + return -EPIPE; + + len = min_t(size_t, count, SNDBUF_SIZE - priv->sndbuf_len); + if (!len) + return 0; + + memcpy(priv->sndbuf + priv->sndbuf_len, buf, len); + priv->sndbuf_len += len; + + if (priv->iucv_state == IUCV_CONNECTED) + schedule_delayed_work(&priv->sndbuf_work, QUEUE_SNDBUF_DELAY); + + return len; +} + +/** + * hvc_iucv_send() - Send an IUCV message containing terminal data. + * @priv: Pointer to struct hvc_iucv_private instance. + * + * If an IUCV communication path has been established, the buffered output data + * is sent via an IUCV message and the number of bytes sent is returned. + * Returns 0 if there is no established IUCV communication path or + * -EPIPE if an existing IUCV communicaton path has been severed. + */ +static int hvc_iucv_send(struct hvc_iucv_private *priv) +{ + struct iucv_tty_buffer *sb; + int rc, len; + + if (priv->iucv_state == IUCV_SEVERED) + return -EPIPE; + + if (priv->iucv_state == IUCV_DISCONN) + return -EIO; + + if (!priv->sndbuf_len) + return 0; + + /* allocate internal buffer to store msg data and also compute total + * message length */ + sb = alloc_tty_buffer(priv->sndbuf_len, GFP_ATOMIC); + if (!sb) + return -ENOMEM; + + memcpy(sb->mbuf->data, priv->sndbuf, priv->sndbuf_len); + sb->mbuf->datalen = (u16) priv->sndbuf_len; + sb->msg.length = MSG_SIZE(sb->mbuf->datalen); + + list_add_tail(&sb->list, &priv->tty_outqueue); + + rc = __iucv_message_send(priv->path, &sb->msg, 0, 0, + (void *) sb->mbuf, sb->msg.length); + if (rc) { + /* drop the message here; however we might want to handle + * 0x03 (msg limit reached) by trying again... */ + list_del(&sb->list); + destroy_tty_buffer(sb); + } + len = priv->sndbuf_len; + priv->sndbuf_len = 0; + + return len; +} + +/** + * hvc_iucv_sndbuf_work() - Send buffered data over IUCV + * @work: Work structure. + * + * This work queue function sends buffered output data over IUCV and, + * if not all buffered data could be sent, reschedules itself. + */ +static void hvc_iucv_sndbuf_work(struct work_struct *work) +{ + struct hvc_iucv_private *priv; + + priv = container_of(work, struct hvc_iucv_private, sndbuf_work.work); + if (!priv) + return; + + spin_lock_bh(&priv->lock); + hvc_iucv_send(priv); + spin_unlock_bh(&priv->lock); +} + +/** + * hvc_iucv_put_chars() - HVC put_chars operation. + * @vtermno: HVC virtual terminal number. + * @buf: Pointer to an buffer to read data from + * @count: Size of buffer available for reading + * + * The HVC thread calls this method to write characters to the back-end. + * The function calls hvc_iucv_queue() to queue terminal data for sending. + * + * Locking: The method gets called under an irqsave() spinlock; and + * locks struct hvc_iucv_private->lock. + */ +static int hvc_iucv_put_chars(uint32_t vtermno, const char *buf, int count) +{ + struct hvc_iucv_private *priv = hvc_iucv_get_private(vtermno); + int queued; + + if (count <= 0) + return 0; + + if (!priv) + return -ENODEV; + + spin_lock(&priv->lock); + queued = hvc_iucv_queue(priv, buf, count); + spin_unlock(&priv->lock); + + return queued; +} + +/** + * hvc_iucv_notifier_add() - HVC notifier for opening a TTY for the first time. + * @hp: Pointer to the HVC device (struct hvc_struct) + * @id: Additional data (originally passed to hvc_alloc): the index of an struct + * hvc_iucv_private instance. + * + * The function sets the tty state to TTY_OPENED for the struct hvc_iucv_private + * instance that is derived from @id. Always returns 0. + * + * Locking: struct hvc_iucv_private->lock, spin_lock_bh + */ +static int hvc_iucv_notifier_add(struct hvc_struct *hp, int id) +{ + struct hvc_iucv_private *priv; + + priv = hvc_iucv_get_private(id); + if (!priv) + return 0; + + spin_lock_bh(&priv->lock); + priv->tty_state = TTY_OPENED; + spin_unlock_bh(&priv->lock); + + return 0; +} + +/** + * hvc_iucv_cleanup() - Clean up and reset a z/VM IUCV HVC instance. + * @priv: Pointer to the struct hvc_iucv_private instance. + */ +static void hvc_iucv_cleanup(struct hvc_iucv_private *priv) +{ + destroy_tty_buffer_list(&priv->tty_outqueue); + destroy_tty_buffer_list(&priv->tty_inqueue); + + priv->tty_state = TTY_CLOSED; + priv->iucv_state = IUCV_DISCONN; + + priv->sndbuf_len = 0; +} + +/** + * tty_outqueue_empty() - Test if the tty outq is empty + * @priv: Pointer to struct hvc_iucv_private instance. + */ +static inline int tty_outqueue_empty(struct hvc_iucv_private *priv) +{ + int rc; + + spin_lock_bh(&priv->lock); + rc = list_empty(&priv->tty_outqueue); + spin_unlock_bh(&priv->lock); + + return rc; +} + +/** + * flush_sndbuf_sync() - Flush send buffer and wait for completion + * @priv: Pointer to struct hvc_iucv_private instance. + * + * The routine cancels a pending sndbuf work, calls hvc_iucv_send() + * to flush any buffered terminal output data and waits for completion. + */ +static void flush_sndbuf_sync(struct hvc_iucv_private *priv) +{ + int sync_wait; + + cancel_delayed_work_sync(&priv->sndbuf_work); + + spin_lock_bh(&priv->lock); + hvc_iucv_send(priv); /* force sending buffered data */ + sync_wait = !list_empty(&priv->tty_outqueue); /* anything queued ? */ + spin_unlock_bh(&priv->lock); + + if (sync_wait) + wait_event_timeout(priv->sndbuf_waitq, + tty_outqueue_empty(priv), HZ/10); +} + +/** + * hvc_iucv_hangup() - Sever IUCV path and schedule hvc tty hang up + * @priv: Pointer to hvc_iucv_private structure + * + * This routine severs an existing IUCV communication path and hangs + * up the underlying HVC terminal device. + * The hang-up occurs only if an IUCV communication path is established; + * otherwise there is no need to hang up the terminal device. + * + * The IUCV HVC hang-up is separated into two steps: + * 1. After the IUCV path has been severed, the iucv_state is set to + * IUCV_SEVERED. + * 2. Later, when the HVC thread calls hvc_iucv_get_chars(), the + * IUCV_SEVERED state causes the tty hang-up in the HVC layer. + * + * If the tty has not yet been opened, clean up the hvc_iucv_private + * structure to allow re-connects. + * If the tty has been opened, let get_chars() return -EPIPE to signal + * the HVC layer to hang up the tty and, if so, wake up the HVC thread + * to call get_chars()... + * + * Special notes on hanging up a HVC terminal instantiated as console: + * Hang-up: 1. do_tty_hangup() replaces file ops (= hung_up_tty_fops) + * 2. do_tty_hangup() calls tty->ops->close() for console_filp + * => no hangup notifier is called by HVC (default) + * 2. hvc_close() returns because of tty_hung_up_p(filp) + * => no delete notifier is called! + * Finally, the back-end is not being notified, thus, the tty session is + * kept active (TTY_OPEN) to be ready for re-connects. + * + * Locking: spin_lock(&priv->lock) w/o disabling bh + */ +static void hvc_iucv_hangup(struct hvc_iucv_private *priv) +{ + struct iucv_path *path; + + path = NULL; + spin_lock(&priv->lock); + if (priv->iucv_state == IUCV_CONNECTED) { + path = priv->path; + priv->path = NULL; + priv->iucv_state = IUCV_SEVERED; + if (priv->tty_state == TTY_CLOSED) + hvc_iucv_cleanup(priv); + else + /* console is special (see above) */ + if (priv->is_console) { + hvc_iucv_cleanup(priv); + priv->tty_state = TTY_OPENED; + } else + hvc_kick(); + } + spin_unlock(&priv->lock); + + /* finally sever path (outside of priv->lock due to lock ordering) */ + if (path) { + iucv_path_sever(path, NULL); + iucv_path_free(path); + } +} + +/** + * hvc_iucv_notifier_hangup() - HVC notifier for TTY hangups. + * @hp: Pointer to the HVC device (struct hvc_struct) + * @id: Additional data (originally passed to hvc_alloc): + * the index of an struct hvc_iucv_private instance. + * + * This routine notifies the HVC back-end that a tty hangup (carrier loss, + * virtual or otherwise) has occured. + * The z/VM IUCV HVC device driver ignores virtual hangups (vhangup()) + * to keep an existing IUCV communication path established. + * (Background: vhangup() is called from user space (by getty or login) to + * disable writing to the tty by other applications). + * If the tty has been opened and an established IUCV path has been severed + * (we caused the tty hangup), the function calls hvc_iucv_cleanup(). + * + * Locking: struct hvc_iucv_private->lock + */ +static void hvc_iucv_notifier_hangup(struct hvc_struct *hp, int id) +{ + struct hvc_iucv_private *priv; + + priv = hvc_iucv_get_private(id); + if (!priv) + return; + + flush_sndbuf_sync(priv); + + spin_lock_bh(&priv->lock); + /* NOTE: If the hangup was scheduled by ourself (from the iucv + * path_servered callback [IUCV_SEVERED]), we have to clean up + * our structure and to set state to TTY_CLOSED. + * If the tty was hung up otherwise (e.g. vhangup()), then we + * ignore this hangup and keep an established IUCV path open... + * (...the reason is that we are not able to connect back to the + * client if we disconnect on hang up) */ + priv->tty_state = TTY_CLOSED; + + if (priv->iucv_state == IUCV_SEVERED) + hvc_iucv_cleanup(priv); + spin_unlock_bh(&priv->lock); +} + +/** + * hvc_iucv_notifier_del() - HVC notifier for closing a TTY for the last time. + * @hp: Pointer to the HVC device (struct hvc_struct) + * @id: Additional data (originally passed to hvc_alloc): + * the index of an struct hvc_iucv_private instance. + * + * This routine notifies the HVC back-end that the last tty device fd has been + * closed. The function calls hvc_iucv_cleanup() to clean up the struct + * hvc_iucv_private instance. + * + * Locking: struct hvc_iucv_private->lock + */ +static void hvc_iucv_notifier_del(struct hvc_struct *hp, int id) +{ + struct hvc_iucv_private *priv; + struct iucv_path *path; + + priv = hvc_iucv_get_private(id); + if (!priv) + return; + + flush_sndbuf_sync(priv); + + spin_lock_bh(&priv->lock); + path = priv->path; /* save reference to IUCV path */ + priv->path = NULL; + hvc_iucv_cleanup(priv); + spin_unlock_bh(&priv->lock); + + /* sever IUCV path outside of priv->lock due to lock ordering of: + * priv->lock <--> iucv_table_lock */ + if (path) { + iucv_path_sever(path, NULL); + iucv_path_free(path); + } +} + +/** + * hvc_iucv_filter_connreq() - Filter connection request based on z/VM user ID + * @ipvmid: Originating z/VM user ID (right padded with blanks) + * + * Returns 0 if the z/VM user ID @ipvmid is allowed to connection, otherwise + * non-zero. + */ +static int hvc_iucv_filter_connreq(u8 ipvmid[8]) +{ + size_t i; + + /* Note: default policy is ACCEPT if no filter is set */ + if (!hvc_iucv_filter_size) + return 0; + + for (i = 0; i < hvc_iucv_filter_size; i++) + if (0 == memcmp(ipvmid, hvc_iucv_filter + (8 * i), 8)) + return 0; + return 1; +} + +/** + * hvc_iucv_path_pending() - IUCV handler to process a connection request. + * @path: Pending path (struct iucv_path) + * @ipvmid: z/VM system identifier of originator + * @ipuser: User specified data for this path + * (AF_IUCV: port/service name and originator port) + * + * The function uses the @ipuser data to determine if the pending path belongs + * to a terminal managed by this device driver. + * If the path belongs to this driver, ensure that the terminal is not accessed + * multiple times (only one connection to a terminal is allowed). + * If the terminal is not yet connected, the pending path is accepted and is + * associated to the appropriate struct hvc_iucv_private instance. + * + * Returns 0 if @path belongs to a terminal managed by the this device driver; + * otherwise returns -ENODEV in order to dispatch this path to other handlers. + * + * Locking: struct hvc_iucv_private->lock + */ +static int hvc_iucv_path_pending(struct iucv_path *path, + u8 ipvmid[8], u8 ipuser[16]) +{ + struct hvc_iucv_private *priv; + u8 nuser_data[16]; + u8 vm_user_id[9]; + int i, rc; + + priv = NULL; + for (i = 0; i < hvc_iucv_devices; i++) + if (hvc_iucv_table[i] && + (0 == memcmp(hvc_iucv_table[i]->srv_name, ipuser, 8))) { + priv = hvc_iucv_table[i]; + break; + } + if (!priv) + return -ENODEV; + + /* Enforce that ipvmid is allowed to connect to us */ + read_lock(&hvc_iucv_filter_lock); + rc = hvc_iucv_filter_connreq(ipvmid); + read_unlock(&hvc_iucv_filter_lock); + if (rc) { + iucv_path_sever(path, ipuser); + iucv_path_free(path); + memcpy(vm_user_id, ipvmid, 8); + vm_user_id[8] = 0; + pr_info("A connection request from z/VM user ID %s " + "was refused\n", vm_user_id); + return 0; + } + + spin_lock(&priv->lock); + + /* If the terminal is already connected or being severed, then sever + * this path to enforce that there is only ONE established communication + * path per terminal. */ + if (priv->iucv_state != IUCV_DISCONN) { + iucv_path_sever(path, ipuser); + iucv_path_free(path); + goto out_path_handled; + } + + /* accept path */ + memcpy(nuser_data, ipuser + 8, 8); /* remote service (for af_iucv) */ + memcpy(nuser_data + 8, ipuser, 8); /* local service (for af_iucv) */ + path->msglim = 0xffff; /* IUCV MSGLIMIT */ + path->flags &= ~IUCV_IPRMDATA; /* TODO: use IUCV_IPRMDATA */ + rc = iucv_path_accept(path, &hvc_iucv_handler, nuser_data, priv); + if (rc) { + iucv_path_sever(path, ipuser); + iucv_path_free(path); + goto out_path_handled; + } + priv->path = path; + priv->iucv_state = IUCV_CONNECTED; + + /* flush buffered output data... */ + schedule_delayed_work(&priv->sndbuf_work, 5); + +out_path_handled: + spin_unlock(&priv->lock); + return 0; +} + +/** + * hvc_iucv_path_severed() - IUCV handler to process a path sever. + * @path: Pending path (struct iucv_path) + * @ipuser: User specified data for this path + * (AF_IUCV: port/service name and originator port) + * + * This function calls the hvc_iucv_hangup() function for the + * respective IUCV HVC terminal. + * + * Locking: struct hvc_iucv_private->lock + */ +static void hvc_iucv_path_severed(struct iucv_path *path, u8 ipuser[16]) +{ + struct hvc_iucv_private *priv = path->private; + + hvc_iucv_hangup(priv); +} + +/** + * hvc_iucv_msg_pending() - IUCV handler to process an incoming IUCV message. + * @path: Pending path (struct iucv_path) + * @msg: Pointer to the IUCV message + * + * The function puts an incoming message on the input queue for later + * processing (by hvc_iucv_get_chars() / hvc_iucv_write()). + * If the tty has not yet been opened, the message is rejected. + * + * Locking: struct hvc_iucv_private->lock + */ +static void hvc_iucv_msg_pending(struct iucv_path *path, + struct iucv_message *msg) +{ + struct hvc_iucv_private *priv = path->private; + struct iucv_tty_buffer *rb; + + /* reject messages that exceed max size of iucv_tty_msg->datalen */ + if (msg->length > MSG_SIZE(MSG_MAX_DATALEN)) { + iucv_message_reject(path, msg); + return; + } + + spin_lock(&priv->lock); + + /* reject messages if tty has not yet been opened */ + if (priv->tty_state == TTY_CLOSED) { + iucv_message_reject(path, msg); + goto unlock_return; + } + + /* allocate tty buffer to save iucv msg only */ + rb = alloc_tty_buffer(0, GFP_ATOMIC); + if (!rb) { + iucv_message_reject(path, msg); + goto unlock_return; /* -ENOMEM */ + } + rb->msg = *msg; + + list_add_tail(&rb->list, &priv->tty_inqueue); + + hvc_kick(); /* wake up hvc thread */ + +unlock_return: + spin_unlock(&priv->lock); +} + +/** + * hvc_iucv_msg_complete() - IUCV handler to process message completion + * @path: Pending path (struct iucv_path) + * @msg: Pointer to the IUCV message + * + * The function is called upon completion of message delivery to remove the + * message from the outqueue. Additional delivery information can be found + * msg->audit: rejected messages (0x040000 (IPADRJCT)), and + * purged messages (0x010000 (IPADPGNR)). + * + * Locking: struct hvc_iucv_private->lock + */ +static void hvc_iucv_msg_complete(struct iucv_path *path, + struct iucv_message *msg) +{ + struct hvc_iucv_private *priv = path->private; + struct iucv_tty_buffer *ent, *next; + LIST_HEAD(list_remove); + + spin_lock(&priv->lock); + list_for_each_entry_safe(ent, next, &priv->tty_outqueue, list) + if (ent->msg.id == msg->id) { + list_move(&ent->list, &list_remove); + break; + } + wake_up(&priv->sndbuf_waitq); + spin_unlock(&priv->lock); + destroy_tty_buffer_list(&list_remove); +} + +/** + * hvc_iucv_pm_freeze() - Freeze PM callback + * @dev: IUVC HVC terminal device + * + * Sever an established IUCV communication path and + * trigger a hang-up of the underlying HVC terminal. + */ +static int hvc_iucv_pm_freeze(struct device *dev) +{ + struct hvc_iucv_private *priv = dev_get_drvdata(dev); + + local_bh_disable(); + hvc_iucv_hangup(priv); + local_bh_enable(); + + return 0; +} + +/** + * hvc_iucv_pm_restore_thaw() - Thaw and restore PM callback + * @dev: IUVC HVC terminal device + * + * Wake up the HVC thread to trigger hang-up and respective + * HVC back-end notifier invocations. + */ +static int hvc_iucv_pm_restore_thaw(struct device *dev) +{ + hvc_kick(); + return 0; +} + + +/* HVC operations */ +static const struct hv_ops hvc_iucv_ops = { + .get_chars = hvc_iucv_get_chars, + .put_chars = hvc_iucv_put_chars, + .notifier_add = hvc_iucv_notifier_add, + .notifier_del = hvc_iucv_notifier_del, + .notifier_hangup = hvc_iucv_notifier_hangup, +}; + +/* Suspend / resume device operations */ +static const struct dev_pm_ops hvc_iucv_pm_ops = { + .freeze = hvc_iucv_pm_freeze, + .thaw = hvc_iucv_pm_restore_thaw, + .restore = hvc_iucv_pm_restore_thaw, +}; + +/* IUCV HVC device driver */ +static struct device_driver hvc_iucv_driver = { + .name = KMSG_COMPONENT, + .bus = &iucv_bus, + .pm = &hvc_iucv_pm_ops, +}; + +/** + * hvc_iucv_alloc() - Allocates a new struct hvc_iucv_private instance + * @id: hvc_iucv_table index + * @is_console: Flag if the instance is used as Linux console + * + * This function allocates a new hvc_iucv_private structure and stores + * the instance in hvc_iucv_table at index @id. + * Returns 0 on success; otherwise non-zero. + */ +static int __init hvc_iucv_alloc(int id, unsigned int is_console) +{ + struct hvc_iucv_private *priv; + char name[9]; + int rc; + + priv = kzalloc(sizeof(struct hvc_iucv_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + INIT_LIST_HEAD(&priv->tty_outqueue); + INIT_LIST_HEAD(&priv->tty_inqueue); + INIT_DELAYED_WORK(&priv->sndbuf_work, hvc_iucv_sndbuf_work); + init_waitqueue_head(&priv->sndbuf_waitq); + + priv->sndbuf = (void *) get_zeroed_page(GFP_KERNEL); + if (!priv->sndbuf) { + kfree(priv); + return -ENOMEM; + } + + /* set console flag */ + priv->is_console = is_console; + + /* allocate hvc device */ + priv->hvc = hvc_alloc(HVC_IUCV_MAGIC + id, /* PAGE_SIZE */ + HVC_IUCV_MAGIC + id, &hvc_iucv_ops, 256); + if (IS_ERR(priv->hvc)) { + rc = PTR_ERR(priv->hvc); + goto out_error_hvc; + } + + /* notify HVC thread instead of using polling */ + priv->hvc->irq_requested = 1; + + /* setup iucv related information */ + snprintf(name, 9, "lnxhvc%-2d", id); + memcpy(priv->srv_name, name, 8); + ASCEBC(priv->srv_name, 8); + + /* create and setup device */ + priv->dev = kzalloc(sizeof(*priv->dev), GFP_KERNEL); + if (!priv->dev) { + rc = -ENOMEM; + goto out_error_dev; + } + dev_set_name(priv->dev, "hvc_iucv%d", id); + dev_set_drvdata(priv->dev, priv); + priv->dev->bus = &iucv_bus; + priv->dev->parent = iucv_root; + priv->dev->driver = &hvc_iucv_driver; + priv->dev->release = (void (*)(struct device *)) kfree; + rc = device_register(priv->dev); + if (rc) { + put_device(priv->dev); + goto out_error_dev; + } + + hvc_iucv_table[id] = priv; + return 0; + +out_error_dev: + hvc_remove(priv->hvc); +out_error_hvc: + free_page((unsigned long) priv->sndbuf); + kfree(priv); + + return rc; +} + +/** + * hvc_iucv_destroy() - Destroy and free hvc_iucv_private instances + */ +static void __init hvc_iucv_destroy(struct hvc_iucv_private *priv) +{ + hvc_remove(priv->hvc); + device_unregister(priv->dev); + free_page((unsigned long) priv->sndbuf); + kfree(priv); +} + +/** + * hvc_iucv_parse_filter() - Parse filter for a single z/VM user ID + * @filter: String containing a comma-separated list of z/VM user IDs + */ +static const char *hvc_iucv_parse_filter(const char *filter, char *dest) +{ + const char *nextdelim, *residual; + size_t len; + + nextdelim = strchr(filter, ','); + if (nextdelim) { + len = nextdelim - filter; + residual = nextdelim + 1; + } else { + len = strlen(filter); + residual = filter + len; + } + + if (len == 0) + return ERR_PTR(-EINVAL); + + /* check for '\n' (if called from sysfs) */ + if (filter[len - 1] == '\n') + len--; + + if (len > 8) + return ERR_PTR(-EINVAL); + + /* pad with blanks and save upper case version of user ID */ + memset(dest, ' ', 8); + while (len--) + dest[len] = toupper(filter[len]); + return residual; +} + +/** + * hvc_iucv_setup_filter() - Set up z/VM user ID filter + * @filter: String consisting of a comma-separated list of z/VM user IDs + * + * The function parses the @filter string and creates an array containing + * the list of z/VM user ID filter entries. + * Return code 0 means success, -EINVAL if the filter is syntactically + * incorrect, -ENOMEM if there was not enough memory to allocate the + * filter list array, or -ENOSPC if too many z/VM user IDs have been specified. + */ +static int hvc_iucv_setup_filter(const char *val) +{ + const char *residual; + int err; + size_t size, count; + void *array, *old_filter; + + count = strlen(val); + if (count == 0 || (count == 1 && val[0] == '\n')) { + size = 0; + array = NULL; + goto out_replace_filter; /* clear filter */ + } + + /* count user IDs in order to allocate sufficient memory */ + size = 1; + residual = val; + while ((residual = strchr(residual, ',')) != NULL) { + residual++; + size++; + } + + /* check if the specified list exceeds the filter limit */ + if (size > MAX_VMID_FILTER) + return -ENOSPC; + + array = kzalloc(size * 8, GFP_KERNEL); + if (!array) + return -ENOMEM; + + count = size; + residual = val; + while (*residual && count) { + residual = hvc_iucv_parse_filter(residual, + array + ((size - count) * 8)); + if (IS_ERR(residual)) { + err = PTR_ERR(residual); + kfree(array); + goto out_err; + } + count--; + } + +out_replace_filter: + write_lock_bh(&hvc_iucv_filter_lock); + old_filter = hvc_iucv_filter; + hvc_iucv_filter_size = size; + hvc_iucv_filter = array; + write_unlock_bh(&hvc_iucv_filter_lock); + kfree(old_filter); + + err = 0; +out_err: + return err; +} + +/** + * param_set_vmidfilter() - Set z/VM user ID filter parameter + * @val: String consisting of a comma-separated list of z/VM user IDs + * @kp: Kernel parameter pointing to hvc_iucv_filter array + * + * The function sets up the z/VM user ID filter specified as comma-separated + * list of user IDs in @val. + * Note: If it is called early in the boot process, @val is stored and + * parsed later in hvc_iucv_init(). + */ +static int param_set_vmidfilter(const char *val, const struct kernel_param *kp) +{ + int rc; + + if (!MACHINE_IS_VM || !hvc_iucv_devices) + return -ENODEV; + + if (!val) + return -EINVAL; + + rc = 0; + if (slab_is_available()) + rc = hvc_iucv_setup_filter(val); + else + hvc_iucv_filter_string = val; /* defer... */ + return rc; +} + +/** + * param_get_vmidfilter() - Get z/VM user ID filter + * @buffer: Buffer to store z/VM user ID filter, + * (buffer size assumption PAGE_SIZE) + * @kp: Kernel parameter pointing to the hvc_iucv_filter array + * + * The function stores the filter as a comma-separated list of z/VM user IDs + * in @buffer. Typically, sysfs routines call this function for attr show. + */ +static int param_get_vmidfilter(char *buffer, const struct kernel_param *kp) +{ + int rc; + size_t index, len; + void *start, *end; + + if (!MACHINE_IS_VM || !hvc_iucv_devices) + return -ENODEV; + + rc = 0; + read_lock_bh(&hvc_iucv_filter_lock); + for (index = 0; index < hvc_iucv_filter_size; index++) { + start = hvc_iucv_filter + (8 * index); + end = memchr(start, ' ', 8); + len = (end) ? end - start : 8; + memcpy(buffer + rc, start, len); + rc += len; + buffer[rc++] = ','; + } + read_unlock_bh(&hvc_iucv_filter_lock); + if (rc) + buffer[--rc] = '\0'; /* replace last comma and update rc */ + return rc; +} + +#define param_check_vmidfilter(name, p) __param_check(name, p, void) + +static struct kernel_param_ops param_ops_vmidfilter = { + .set = param_set_vmidfilter, + .get = param_get_vmidfilter, +}; + +/** + * hvc_iucv_init() - z/VM IUCV HVC device driver initialization + */ +static int __init hvc_iucv_init(void) +{ + int rc; + unsigned int i; + + if (!hvc_iucv_devices) + return -ENODEV; + + if (!MACHINE_IS_VM) { + pr_notice("The z/VM IUCV HVC device driver cannot " + "be used without z/VM\n"); + rc = -ENODEV; + goto out_error; + } + + if (hvc_iucv_devices > MAX_HVC_IUCV_LINES) { + pr_err("%lu is not a valid value for the hvc_iucv= " + "kernel parameter\n", hvc_iucv_devices); + rc = -EINVAL; + goto out_error; + } + + /* register IUCV HVC device driver */ + rc = driver_register(&hvc_iucv_driver); + if (rc) + goto out_error; + + /* parse hvc_iucv_allow string and create z/VM user ID filter list */ + if (hvc_iucv_filter_string) { + rc = hvc_iucv_setup_filter(hvc_iucv_filter_string); + switch (rc) { + case 0: + break; + case -ENOMEM: + pr_err("Allocating memory failed with " + "reason code=%d\n", 3); + goto out_error; + case -EINVAL: + pr_err("hvc_iucv_allow= does not specify a valid " + "z/VM user ID list\n"); + goto out_error; + case -ENOSPC: + pr_err("hvc_iucv_allow= specifies too many " + "z/VM user IDs\n"); + goto out_error; + default: + goto out_error; + } + } + + hvc_iucv_buffer_cache = kmem_cache_create(KMSG_COMPONENT, + sizeof(struct iucv_tty_buffer), + 0, 0, NULL); + if (!hvc_iucv_buffer_cache) { + pr_err("Allocating memory failed with reason code=%d\n", 1); + rc = -ENOMEM; + goto out_error; + } + + hvc_iucv_mempool = mempool_create_slab_pool(MEMPOOL_MIN_NR, + hvc_iucv_buffer_cache); + if (!hvc_iucv_mempool) { + pr_err("Allocating memory failed with reason code=%d\n", 2); + kmem_cache_destroy(hvc_iucv_buffer_cache); + rc = -ENOMEM; + goto out_error; + } + + /* register the first terminal device as console + * (must be done before allocating hvc terminal devices) */ + rc = hvc_instantiate(HVC_IUCV_MAGIC, IUCV_HVC_CON_IDX, &hvc_iucv_ops); + if (rc) { + pr_err("Registering HVC terminal device as " + "Linux console failed\n"); + goto out_error_memory; + } + + /* allocate hvc_iucv_private structs */ + for (i = 0; i < hvc_iucv_devices; i++) { + rc = hvc_iucv_alloc(i, (i == IUCV_HVC_CON_IDX) ? 1 : 0); + if (rc) { + pr_err("Creating a new HVC terminal device " + "failed with error code=%d\n", rc); + goto out_error_hvc; + } + } + + /* register IUCV callback handler */ + rc = iucv_register(&hvc_iucv_handler, 0); + if (rc) { + pr_err("Registering IUCV handlers failed with error code=%d\n", + rc); + goto out_error_hvc; + } + + return 0; + +out_error_hvc: + for (i = 0; i < hvc_iucv_devices; i++) + if (hvc_iucv_table[i]) + hvc_iucv_destroy(hvc_iucv_table[i]); +out_error_memory: + mempool_destroy(hvc_iucv_mempool); + kmem_cache_destroy(hvc_iucv_buffer_cache); +out_error: + if (hvc_iucv_filter) + kfree(hvc_iucv_filter); + hvc_iucv_devices = 0; /* ensure that we do not provide any device */ + return rc; +} + +/** + * hvc_iucv_config() - Parsing of hvc_iucv= kernel command line parameter + * @val: Parameter value (numeric) + */ +static int __init hvc_iucv_config(char *val) +{ + return strict_strtoul(val, 10, &hvc_iucv_devices); +} + + +device_initcall(hvc_iucv_init); +__setup("hvc_iucv=", hvc_iucv_config); +core_param(hvc_iucv_allow, hvc_iucv_filter, vmidfilter, 0640); diff --git a/drivers/tty/hvc/hvc_rtas.c b/drivers/tty/hvc/hvc_rtas.c new file mode 100644 index 000000000000..61c4a61558d9 --- /dev/null +++ b/drivers/tty/hvc/hvc_rtas.c @@ -0,0 +1,133 @@ +/* + * IBM RTAS driver interface to hvc_console.c + * + * (C) Copyright IBM Corporation 2001-2005 + * (C) Copyright Red Hat, Inc. 2005 + * + * Author(s): Maximino Augilar + * : Ryan S. Arnold + * : Utz Bacher + * : David Woodhouse + * + * inspired by drivers/char/hvc_console.c + * written by Anton Blanchard and Paul Mackerras + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include "hvc_console.h" + +#define hvc_rtas_cookie 0x67781e15 +struct hvc_struct *hvc_rtas_dev; + +static int rtascons_put_char_token = RTAS_UNKNOWN_SERVICE; +static int rtascons_get_char_token = RTAS_UNKNOWN_SERVICE; + +static inline int hvc_rtas_write_console(uint32_t vtermno, const char *buf, + int count) +{ + int i; + + for (i = 0; i < count; i++) { + if (rtas_call(rtascons_put_char_token, 1, 1, NULL, buf[i])) + break; + } + + return i; +} + +static int hvc_rtas_read_console(uint32_t vtermno, char *buf, int count) +{ + int i, c; + + for (i = 0; i < count; i++) { + if (rtas_call(rtascons_get_char_token, 0, 2, &c)) + break; + + buf[i] = c; + } + + return i; +} + +static const struct hv_ops hvc_rtas_get_put_ops = { + .get_chars = hvc_rtas_read_console, + .put_chars = hvc_rtas_write_console, +}; + +static int __init hvc_rtas_init(void) +{ + struct hvc_struct *hp; + + if (rtascons_put_char_token == RTAS_UNKNOWN_SERVICE) + rtascons_put_char_token = rtas_token("put-term-char"); + if (rtascons_put_char_token == RTAS_UNKNOWN_SERVICE) + return -EIO; + + if (rtascons_get_char_token == RTAS_UNKNOWN_SERVICE) + rtascons_get_char_token = rtas_token("get-term-char"); + if (rtascons_get_char_token == RTAS_UNKNOWN_SERVICE) + return -EIO; + + BUG_ON(hvc_rtas_dev); + + /* Allocate an hvc_struct for the console device we instantiated + * earlier. Save off hp so that we can return it on exit */ + hp = hvc_alloc(hvc_rtas_cookie, NO_IRQ, &hvc_rtas_get_put_ops, 16); + if (IS_ERR(hp)) + return PTR_ERR(hp); + + hvc_rtas_dev = hp; + + return 0; +} +module_init(hvc_rtas_init); + +/* This will tear down the tty portion of the driver */ +static void __exit hvc_rtas_exit(void) +{ + /* Really the fun isn't over until the worker thread breaks down and + * the tty cleans up */ + if (hvc_rtas_dev) + hvc_remove(hvc_rtas_dev); +} +module_exit(hvc_rtas_exit); + +/* This will happen prior to module init. There is no tty at this time? */ +static int __init hvc_rtas_console_init(void) +{ + rtascons_put_char_token = rtas_token("put-term-char"); + if (rtascons_put_char_token == RTAS_UNKNOWN_SERVICE) + return -EIO; + + rtascons_get_char_token = rtas_token("get-term-char"); + if (rtascons_get_char_token == RTAS_UNKNOWN_SERVICE) + return -EIO; + + hvc_instantiate(hvc_rtas_cookie, 0, &hvc_rtas_get_put_ops); + add_preferred_console("hvc", 0, NULL); + + return 0; +} +console_initcall(hvc_rtas_console_init); diff --git a/drivers/tty/hvc/hvc_tile.c b/drivers/tty/hvc/hvc_tile.c new file mode 100644 index 000000000000..7a84a0595477 --- /dev/null +++ b/drivers/tty/hvc/hvc_tile.c @@ -0,0 +1,68 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Tilera TILE Processor hypervisor console + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include "hvc_console.h" + +static int hvc_tile_put_chars(uint32_t vt, const char *buf, int count) +{ + return hv_console_write((HV_VirtAddr)buf, count); +} + +static int hvc_tile_get_chars(uint32_t vt, char *buf, int count) +{ + int i, c; + + for (i = 0; i < count; ++i) { + c = hv_console_read_if_ready(); + if (c < 0) + break; + buf[i] = c; + } + + return i; +} + +static const struct hv_ops hvc_tile_get_put_ops = { + .get_chars = hvc_tile_get_chars, + .put_chars = hvc_tile_put_chars, +}; + +static int __init hvc_tile_console_init(void) +{ + extern void disable_early_printk(void); + hvc_instantiate(0, 0, &hvc_tile_get_put_ops); + add_preferred_console("hvc", 0, NULL); + disable_early_printk(); + return 0; +} +console_initcall(hvc_tile_console_init); + +static int __init hvc_tile_init(void) +{ + struct hvc_struct *s; + s = hvc_alloc(0, 0, &hvc_tile_get_put_ops, 128); + return IS_ERR(s) ? PTR_ERR(s) : 0; +} +device_initcall(hvc_tile_init); diff --git a/drivers/tty/hvc/hvc_udbg.c b/drivers/tty/hvc/hvc_udbg.c new file mode 100644 index 000000000000..b0957e61a7be --- /dev/null +++ b/drivers/tty/hvc/hvc_udbg.c @@ -0,0 +1,96 @@ +/* + * udbg interface to hvc_console.c + * + * (C) Copyright David Gibson, IBM Corporation 2008. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "hvc_console.h" + +struct hvc_struct *hvc_udbg_dev; + +static int hvc_udbg_put(uint32_t vtermno, const char *buf, int count) +{ + int i; + + for (i = 0; i < count; i++) + udbg_putc(buf[i]); + + return i; +} + +static int hvc_udbg_get(uint32_t vtermno, char *buf, int count) +{ + int i, c; + + if (!udbg_getc_poll) + return 0; + + for (i = 0; i < count; i++) { + if ((c = udbg_getc_poll()) == -1) + break; + buf[i] = c; + } + + return i; +} + +static const struct hv_ops hvc_udbg_ops = { + .get_chars = hvc_udbg_get, + .put_chars = hvc_udbg_put, +}; + +static int __init hvc_udbg_init(void) +{ + struct hvc_struct *hp; + + BUG_ON(hvc_udbg_dev); + + hp = hvc_alloc(0, NO_IRQ, &hvc_udbg_ops, 16); + if (IS_ERR(hp)) + return PTR_ERR(hp); + + hvc_udbg_dev = hp; + + return 0; +} +module_init(hvc_udbg_init); + +static void __exit hvc_udbg_exit(void) +{ + if (hvc_udbg_dev) + hvc_remove(hvc_udbg_dev); +} +module_exit(hvc_udbg_exit); + +static int __init hvc_udbg_console_init(void) +{ + hvc_instantiate(0, 0, &hvc_udbg_ops); + add_preferred_console("hvc", 0, NULL); + + return 0; +} +console_initcall(hvc_udbg_console_init); diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c new file mode 100644 index 000000000000..5e2f52b33327 --- /dev/null +++ b/drivers/tty/hvc/hvc_vio.c @@ -0,0 +1,173 @@ +/* + * vio driver interface to hvc_console.c + * + * This code was moved here to allow the remaing code to be reused as a + * generic polling mode with semi-reliable transport driver core to the + * console and tty subsystems. + * + * + * Copyright (C) 2001 Anton Blanchard , IBM + * Copyright (C) 2001 Paul Mackerras , IBM + * Copyright (C) 2004 Benjamin Herrenschmidt , IBM Corp. + * Copyright (C) 2004 IBM Corporation + * + * Additional Author(s): + * Ryan S. Arnold + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#include +#include +#include +#include + +#include "hvc_console.h" + +static const char hvc_driver_name[] = "hvc_console"; + +static struct vio_device_id hvc_driver_table[] __devinitdata = { + {"serial", "hvterm1"}, + { "", "" } +}; +MODULE_DEVICE_TABLE(vio, hvc_driver_table); + +static int filtered_get_chars(uint32_t vtermno, char *buf, int count) +{ + unsigned long got; + int i; + + /* + * Vio firmware will read up to SIZE_VIO_GET_CHARS at its own discretion + * so we play safe and avoid the situation where got > count which could + * overload the flip buffer. + */ + if (count < SIZE_VIO_GET_CHARS) + return -EAGAIN; + + got = hvc_get_chars(vtermno, buf, count); + + /* + * Work around a HV bug where it gives us a null + * after every \r. -- paulus + */ + for (i = 1; i < got; ++i) { + if (buf[i] == 0 && buf[i-1] == '\r') { + --got; + if (i < got) + memmove(&buf[i], &buf[i+1], + got - i); + } + } + return got; +} + +static const struct hv_ops hvc_get_put_ops = { + .get_chars = filtered_get_chars, + .put_chars = hvc_put_chars, + .notifier_add = notifier_add_irq, + .notifier_del = notifier_del_irq, + .notifier_hangup = notifier_hangup_irq, +}; + +static int __devinit hvc_vio_probe(struct vio_dev *vdev, + const struct vio_device_id *id) +{ + struct hvc_struct *hp; + + /* probed with invalid parameters. */ + if (!vdev || !id) + return -EPERM; + + hp = hvc_alloc(vdev->unit_address, vdev->irq, &hvc_get_put_ops, + MAX_VIO_PUT_CHARS); + if (IS_ERR(hp)) + return PTR_ERR(hp); + dev_set_drvdata(&vdev->dev, hp); + + return 0; +} + +static int __devexit hvc_vio_remove(struct vio_dev *vdev) +{ + struct hvc_struct *hp = dev_get_drvdata(&vdev->dev); + + return hvc_remove(hp); +} + +static struct vio_driver hvc_vio_driver = { + .id_table = hvc_driver_table, + .probe = hvc_vio_probe, + .remove = __devexit_p(hvc_vio_remove), + .driver = { + .name = hvc_driver_name, + .owner = THIS_MODULE, + } +}; + +static int __init hvc_vio_init(void) +{ + int rc; + + if (firmware_has_feature(FW_FEATURE_ISERIES)) + return -EIO; + + /* Register as a vio device to receive callbacks */ + rc = vio_register_driver(&hvc_vio_driver); + + return rc; +} +module_init(hvc_vio_init); /* after drivers/char/hvc_console.c */ + +static void __exit hvc_vio_exit(void) +{ + vio_unregister_driver(&hvc_vio_driver); +} +module_exit(hvc_vio_exit); + +/* the device tree order defines our numbering */ +static int hvc_find_vtys(void) +{ + struct device_node *vty; + int num_found = 0; + + for (vty = of_find_node_by_name(NULL, "vty"); vty != NULL; + vty = of_find_node_by_name(vty, "vty")) { + const uint32_t *vtermno; + + /* We have statically defined space for only a certain number + * of console adapters. + */ + if (num_found >= MAX_NR_HVC_CONSOLES) { + of_node_put(vty); + break; + } + + vtermno = of_get_property(vty, "reg", NULL); + if (!vtermno) + continue; + + if (of_device_is_compatible(vty, "hvterm1")) { + hvc_instantiate(*vtermno, num_found, &hvc_get_put_ops); + ++num_found; + } + } + + return num_found; +} +console_initcall(hvc_find_vtys); diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c new file mode 100644 index 000000000000..3740e327f180 --- /dev/null +++ b/drivers/tty/hvc/hvc_xen.c @@ -0,0 +1,271 @@ +/* + * xen console driver interface to hvc_console.c + * + * (c) 2007 Gerd Hoffmann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include + +#include "hvc_console.h" + +#define HVC_COOKIE 0x58656e /* "Xen" in hex */ + +static struct hvc_struct *hvc; +static int xencons_irq; + +/* ------------------------------------------------------------------ */ + +static unsigned long console_pfn = ~0ul; + +static inline struct xencons_interface *xencons_interface(void) +{ + if (console_pfn == ~0ul) + return mfn_to_virt(xen_start_info->console.domU.mfn); + else + return __va(console_pfn << PAGE_SHIFT); +} + +static inline void notify_daemon(void) +{ + /* Use evtchn: this is called early, before irq is set up. */ + notify_remote_via_evtchn(xen_start_info->console.domU.evtchn); +} + +static int __write_console(const char *data, int len) +{ + struct xencons_interface *intf = xencons_interface(); + XENCONS_RING_IDX cons, prod; + int sent = 0; + + cons = intf->out_cons; + prod = intf->out_prod; + mb(); /* update queue values before going on */ + BUG_ON((prod - cons) > sizeof(intf->out)); + + while ((sent < len) && ((prod - cons) < sizeof(intf->out))) + intf->out[MASK_XENCONS_IDX(prod++, intf->out)] = data[sent++]; + + wmb(); /* write ring before updating pointer */ + intf->out_prod = prod; + + if (sent) + notify_daemon(); + return sent; +} + +static int domU_write_console(uint32_t vtermno, const char *data, int len) +{ + int ret = len; + + /* + * Make sure the whole buffer is emitted, polling if + * necessary. We don't ever want to rely on the hvc daemon + * because the most interesting console output is when the + * kernel is crippled. + */ + while (len) { + int sent = __write_console(data, len); + + data += sent; + len -= sent; + + if (unlikely(len)) + HYPERVISOR_sched_op(SCHEDOP_yield, NULL); + } + + return ret; +} + +static int domU_read_console(uint32_t vtermno, char *buf, int len) +{ + struct xencons_interface *intf = xencons_interface(); + XENCONS_RING_IDX cons, prod; + int recv = 0; + + cons = intf->in_cons; + prod = intf->in_prod; + mb(); /* get pointers before reading ring */ + BUG_ON((prod - cons) > sizeof(intf->in)); + + while (cons != prod && recv < len) + buf[recv++] = intf->in[MASK_XENCONS_IDX(cons++, intf->in)]; + + mb(); /* read ring before consuming */ + intf->in_cons = cons; + + notify_daemon(); + return recv; +} + +static struct hv_ops domU_hvc_ops = { + .get_chars = domU_read_console, + .put_chars = domU_write_console, + .notifier_add = notifier_add_irq, + .notifier_del = notifier_del_irq, + .notifier_hangup = notifier_hangup_irq, +}; + +static int dom0_read_console(uint32_t vtermno, char *buf, int len) +{ + return HYPERVISOR_console_io(CONSOLEIO_read, len, buf); +} + +/* + * Either for a dom0 to write to the system console, or a domU with a + * debug version of Xen + */ +static int dom0_write_console(uint32_t vtermno, const char *str, int len) +{ + int rc = HYPERVISOR_console_io(CONSOLEIO_write, len, (char *)str); + if (rc < 0) + return 0; + + return len; +} + +static struct hv_ops dom0_hvc_ops = { + .get_chars = dom0_read_console, + .put_chars = dom0_write_console, + .notifier_add = notifier_add_irq, + .notifier_del = notifier_del_irq, + .notifier_hangup = notifier_hangup_irq, +}; + +static int __init xen_hvc_init(void) +{ + struct hvc_struct *hp; + struct hv_ops *ops; + + if (!xen_pv_domain()) + return -ENODEV; + + if (xen_initial_domain()) { + ops = &dom0_hvc_ops; + xencons_irq = bind_virq_to_irq(VIRQ_CONSOLE, 0); + } else { + if (!xen_start_info->console.domU.evtchn) + return -ENODEV; + + ops = &domU_hvc_ops; + xencons_irq = bind_evtchn_to_irq(xen_start_info->console.domU.evtchn); + } + if (xencons_irq < 0) + xencons_irq = 0; /* NO_IRQ */ + + hp = hvc_alloc(HVC_COOKIE, xencons_irq, ops, 256); + if (IS_ERR(hp)) + return PTR_ERR(hp); + + hvc = hp; + + console_pfn = mfn_to_pfn(xen_start_info->console.domU.mfn); + + return 0; +} + +void xen_console_resume(void) +{ + if (xencons_irq) + rebind_evtchn_irq(xen_start_info->console.domU.evtchn, xencons_irq); +} + +static void __exit xen_hvc_fini(void) +{ + if (hvc) + hvc_remove(hvc); +} + +static int xen_cons_init(void) +{ + struct hv_ops *ops; + + if (!xen_pv_domain()) + return 0; + + if (xen_initial_domain()) + ops = &dom0_hvc_ops; + else + ops = &domU_hvc_ops; + + hvc_instantiate(HVC_COOKIE, 0, ops); + return 0; +} + +module_init(xen_hvc_init); +module_exit(xen_hvc_fini); +console_initcall(xen_cons_init); + +#ifdef CONFIG_EARLY_PRINTK +static void xenboot_write_console(struct console *console, const char *string, + unsigned len) +{ + unsigned int linelen, off = 0; + const char *pos; + + dom0_write_console(0, string, len); + + if (xen_initial_domain()) + return; + + domU_write_console(0, "(early) ", 8); + while (off < len && NULL != (pos = strchr(string+off, '\n'))) { + linelen = pos-string+off; + if (off + linelen > len) + break; + domU_write_console(0, string+off, linelen); + domU_write_console(0, "\r\n", 2); + off += linelen + 1; + } + if (off < len) + domU_write_console(0, string+off, len-off); +} + +struct console xenboot_console = { + .name = "xenboot", + .write = xenboot_write_console, + .flags = CON_PRINTBUFFER | CON_BOOT | CON_ANYTIME, +}; +#endif /* CONFIG_EARLY_PRINTK */ + +void xen_raw_console_write(const char *str) +{ + dom0_write_console(0, str, strlen(str)); +} + +void xen_raw_printk(const char *fmt, ...) +{ + static char buf[512]; + va_list ap; + + va_start(ap, fmt); + vsnprintf(buf, sizeof(buf), fmt, ap); + va_end(ap); + + xen_raw_console_write(buf); +} diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c new file mode 100644 index 000000000000..bedc6c1b6fa5 --- /dev/null +++ b/drivers/tty/hvc/hvcs.c @@ -0,0 +1,1604 @@ +/* + * IBM eServer Hypervisor Virtual Console Server Device Driver + * Copyright (C) 2003, 2004 IBM Corp. + * Ryan S. Arnold (rsa@us.ibm.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Author(s) : Ryan S. Arnold + * + * This is the device driver for the IBM Hypervisor Virtual Console Server, + * "hvcs". The IBM hvcs provides a tty driver interface to allow Linux + * user space applications access to the system consoles of logically + * partitioned operating systems, e.g. Linux, running on the same partitioned + * Power5 ppc64 system. Physical hardware consoles per partition are not + * practical on this hardware so system consoles are accessed by this driver + * using inter-partition firmware interfaces to virtual terminal devices. + * + * A vty is known to the HMC as a "virtual serial server adapter". It is a + * virtual terminal device that is created by firmware upon partition creation + * to act as a partitioned OS's console device. + * + * Firmware dynamically (via hotplug) exposes vty-servers to a running ppc64 + * Linux system upon their creation by the HMC or their exposure during boot. + * The non-user interactive backend of this driver is implemented as a vio + * device driver so that it can receive notification of vty-server lifetimes + * after it registers with the vio bus to handle vty-server probe and remove + * callbacks. + * + * Many vty-servers can be configured to connect to one vty, but a vty can + * only be actively connected to by a single vty-server, in any manner, at one + * time. If the HMC is currently hosting the console for a target Linux + * partition; attempts to open the tty device to the partition's console using + * the hvcs on any partition will return -EBUSY with every open attempt until + * the HMC frees the connection between its vty-server and the desired + * partition's vty device. Conversely, a vty-server may only be connected to + * a single vty at one time even though it may have several configured vty + * partner possibilities. + * + * Firmware does not provide notification of vty partner changes to this + * driver. This means that an HMC Super Admin may add or remove partner vtys + * from a vty-server's partner list but the changes will not be signaled to + * the vty-server. Firmware only notifies the driver when a vty-server is + * added or removed from the system. To compensate for this deficiency, this + * driver implements a sysfs update attribute which provides a method for + * rescanning partner information upon a user's request. + * + * Each vty-server, prior to being exposed to this driver is reference counted + * using the 2.6 Linux kernel kref construct. + * + * For direction on installation and usage of this driver please reference + * Documentation/powerpc/hvcs.txt. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * 1.3.0 -> 1.3.1 In hvcs_open memset(..,0x00,..) instead of memset(..,0x3F,00). + * Removed braces around single statements following conditionals. Removed '= + * 0' after static int declarations since these default to zero. Removed + * list_for_each_safe() and replaced with list_for_each_entry() in + * hvcs_get_by_index(). The 'safe' version is un-needed now that the driver is + * using spinlocks. Changed spin_lock_irqsave() to spin_lock() when locking + * hvcs_structs_lock and hvcs_pi_lock since these are not touched in an int + * handler. Initialized hvcs_structs_lock and hvcs_pi_lock to + * SPIN_LOCK_UNLOCKED at declaration time rather than in hvcs_module_init(). + * Added spin_lock around list_del() in destroy_hvcs_struct() to protect the + * list traversals from a deletion. Removed '= NULL' from pointer declaration + * statements since they are initialized NULL by default. Removed wmb() + * instances from hvcs_try_write(). They probably aren't needed with locking in + * place. Added check and cleanup for hvcs_pi_buff = kmalloc() in + * hvcs_module_init(). Exposed hvcs_struct.index via a sysfs attribute so that + * the coupling between /dev/hvcs* and a vty-server can be automatically + * determined. Moved kobject_put() in hvcs_open outside of the + * spin_unlock_irqrestore(). + * + * 1.3.1 -> 1.3.2 Changed method for determining hvcs_struct->index and had it + * align with how the tty layer always assigns the lowest index available. This + * change resulted in a list of ints that denotes which indexes are available. + * Device additions and removals use the new hvcs_get_index() and + * hvcs_return_index() helper functions. The list is created with + * hvsc_alloc_index_list() and it is destroyed with hvcs_free_index_list(). + * Without these fixes hotplug vty-server adapter support goes crazy with this + * driver if the user removes a vty-server adapter. Moved free_irq() outside of + * the hvcs_final_close() function in order to get it out of the spinlock. + * Rearranged hvcs_close(). Cleaned up some printks and did some housekeeping + * on the changelog. Removed local CLC_LENGTH and used HVCS_CLC_LENGTH from + * arch/powerepc/include/asm/hvcserver.h + * + * 1.3.2 -> 1.3.3 Replaced yield() in hvcs_close() with tty_wait_until_sent() to + * prevent possible lockup with realtime scheduling as similarily pointed out by + * akpm in hvc_console. Changed resulted in the removal of hvcs_final_close() + * to reorder cleanup operations and prevent discarding of pending data during + * an hvcs_close(). Removed spinlock protection of hvcs_struct data members in + * hvcs_write_room() and hvcs_chars_in_buffer() because they aren't needed. + */ + +#define HVCS_DRIVER_VERSION "1.3.3" + +MODULE_AUTHOR("Ryan S. Arnold "); +MODULE_DESCRIPTION("IBM hvcs (Hypervisor Virtual Console Server) Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(HVCS_DRIVER_VERSION); + +/* + * Wait this long per iteration while trying to push buffered data to the + * hypervisor before allowing the tty to complete a close operation. + */ +#define HVCS_CLOSE_WAIT (HZ/100) /* 1/10 of a second */ + +/* + * Since the Linux TTY code does not currently (2-04-2004) support dynamic + * addition of tty derived devices and we shouldn't allocate thousands of + * tty_device pointers when the number of vty-server & vty partner connections + * will most often be much lower than this, we'll arbitrarily allocate + * HVCS_DEFAULT_SERVER_ADAPTERS tty_structs and cdev's by default when we + * register the tty_driver. This can be overridden using an insmod parameter. + */ +#define HVCS_DEFAULT_SERVER_ADAPTERS 64 + +/* + * The user can't insmod with more than HVCS_MAX_SERVER_ADAPTERS hvcs device + * nodes as a sanity check. Theoretically there can be over 1 Billion + * vty-server & vty partner connections. + */ +#define HVCS_MAX_SERVER_ADAPTERS 1024 + +/* + * We let Linux assign us a major number and we start the minors at zero. There + * is no intuitive mapping between minor number and the target vty-server + * adapter except that each new vty-server adapter is always assigned to the + * smallest minor number available. + */ +#define HVCS_MINOR_START 0 + +/* + * The hcall interface involves putting 8 chars into each of two registers. + * We load up those 2 registers (in arch/powerpc/platforms/pseries/hvconsole.c) + * by casting char[16] to long[2]. It would work without __ALIGNED__, but a + * little (tiny) bit slower because an unaligned load is slower than aligned + * load. + */ +#define __ALIGNED__ __attribute__((__aligned__(8))) + +/* + * How much data can firmware send with each hvc_put_chars()? Maybe this + * should be moved into an architecture specific area. + */ +#define HVCS_BUFF_LEN 16 + +/* + * This is the maximum amount of data we'll let the user send us (hvcs_write) at + * once in a chunk as a sanity check. + */ +#define HVCS_MAX_FROM_USER 4096 + +/* + * Be careful when adding flags to this line discipline. Don't add anything + * that will cause echoing or we'll go into recursive loop echoing chars back + * and forth with the console drivers. + */ +static struct ktermios hvcs_tty_termios = { + .c_iflag = IGNBRK | IGNPAR, + .c_oflag = OPOST, + .c_cflag = B38400 | CS8 | CREAD | HUPCL, + .c_cc = INIT_C_CC, + .c_ispeed = 38400, + .c_ospeed = 38400 +}; + +/* + * This value is used to take the place of a command line parameter when the + * module is inserted. It starts as -1 and stays as such if the user doesn't + * specify a module insmod parameter. If they DO specify one then it is set to + * the value of the integer passed in. + */ +static int hvcs_parm_num_devs = -1; +module_param(hvcs_parm_num_devs, int, 0); + +static const char hvcs_driver_name[] = "hvcs"; +static const char hvcs_device_node[] = "hvcs"; +static const char hvcs_driver_string[] + = "IBM hvcs (Hypervisor Virtual Console Server) Driver"; + +/* Status of partner info rescan triggered via sysfs. */ +static int hvcs_rescan_status; + +static struct tty_driver *hvcs_tty_driver; + +/* + * In order to be somewhat sane this driver always associates the hvcs_struct + * index element with the numerically equal tty->index. This means that a + * hotplugged vty-server adapter will always map to the lowest index valued + * device node. If vty-servers were hotplug removed from the system and then + * new ones added the new vty-server may have the largest slot number of all + * the vty-server adapters in the partition but it may have the lowest dev node + * index of all the adapters due to the hole left by the hotplug removed + * adapter. There are a set of functions provided to get the lowest index for + * a new device as well as return the index to the list. This list is allocated + * with a number of elements equal to the number of device nodes requested when + * the module was inserted. + */ +static int *hvcs_index_list; + +/* + * How large is the list? This is kept for traversal since the list is + * dynamically created. + */ +static int hvcs_index_count; + +/* + * Used by the khvcsd to pick up I/O operations when the kernel_thread is + * already awake but potentially shifted to TASK_INTERRUPTIBLE state. + */ +static int hvcs_kicked; + +/* + * Use by the kthread construct for task operations like waking the sleeping + * thread and stopping the kthread. + */ +static struct task_struct *hvcs_task; + +/* + * We allocate this for the use of all of the hvcs_structs when they fetch + * partner info. + */ +static unsigned long *hvcs_pi_buff; + +/* Only allow one hvcs_struct to use the hvcs_pi_buff at a time. */ +static DEFINE_SPINLOCK(hvcs_pi_lock); + +/* One vty-server per hvcs_struct */ +struct hvcs_struct { + spinlock_t lock; + + /* + * This index identifies this hvcs device as the complement to a + * specific tty index. + */ + unsigned int index; + + struct tty_struct *tty; + int open_count; + + /* + * Used to tell the driver kernel_thread what operations need to take + * place upon this hvcs_struct instance. + */ + int todo_mask; + + /* + * This buffer is required so that when hvcs_write_room() reports that + * it can send HVCS_BUFF_LEN characters that it will buffer the full + * HVCS_BUFF_LEN characters if need be. This is essential for opost + * writes since they do not do high level buffering and expect to be + * able to send what the driver commits to sending buffering + * [e.g. tab to space conversions in n_tty.c opost()]. + */ + char buffer[HVCS_BUFF_LEN]; + int chars_in_buffer; + + /* + * Any variable below the kref is valid before a tty is connected and + * stays valid after the tty is disconnected. These shouldn't be + * whacked until the koject refcount reaches zero though some entries + * may be changed via sysfs initiatives. + */ + struct kref kref; /* ref count & hvcs_struct lifetime */ + int connected; /* is the vty-server currently connected to a vty? */ + uint32_t p_unit_address; /* partner unit address */ + uint32_t p_partition_ID; /* partner partition ID */ + char p_location_code[HVCS_CLC_LENGTH + 1]; /* CLC + Null Term */ + struct list_head next; /* list management */ + struct vio_dev *vdev; +}; + +/* Required to back map a kref to its containing object */ +#define from_kref(k) container_of(k, struct hvcs_struct, kref) + +static LIST_HEAD(hvcs_structs); +static DEFINE_SPINLOCK(hvcs_structs_lock); + +static void hvcs_unthrottle(struct tty_struct *tty); +static void hvcs_throttle(struct tty_struct *tty); +static irqreturn_t hvcs_handle_interrupt(int irq, void *dev_instance); + +static int hvcs_write(struct tty_struct *tty, + const unsigned char *buf, int count); +static int hvcs_write_room(struct tty_struct *tty); +static int hvcs_chars_in_buffer(struct tty_struct *tty); + +static int hvcs_has_pi(struct hvcs_struct *hvcsd); +static void hvcs_set_pi(struct hvcs_partner_info *pi, + struct hvcs_struct *hvcsd); +static int hvcs_get_pi(struct hvcs_struct *hvcsd); +static int hvcs_rescan_devices_list(void); + +static int hvcs_partner_connect(struct hvcs_struct *hvcsd); +static void hvcs_partner_free(struct hvcs_struct *hvcsd); + +static int hvcs_enable_device(struct hvcs_struct *hvcsd, + uint32_t unit_address, unsigned int irq, struct vio_dev *dev); + +static int hvcs_open(struct tty_struct *tty, struct file *filp); +static void hvcs_close(struct tty_struct *tty, struct file *filp); +static void hvcs_hangup(struct tty_struct * tty); + +static int __devinit hvcs_probe(struct vio_dev *dev, + const struct vio_device_id *id); +static int __devexit hvcs_remove(struct vio_dev *dev); +static int __init hvcs_module_init(void); +static void __exit hvcs_module_exit(void); + +#define HVCS_SCHED_READ 0x00000001 +#define HVCS_QUICK_READ 0x00000002 +#define HVCS_TRY_WRITE 0x00000004 +#define HVCS_READ_MASK (HVCS_SCHED_READ | HVCS_QUICK_READ) + +static inline struct hvcs_struct *from_vio_dev(struct vio_dev *viod) +{ + return dev_get_drvdata(&viod->dev); +} +/* The sysfs interface for the driver and devices */ + +static ssize_t hvcs_partner_vtys_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct vio_dev *viod = to_vio_dev(dev); + struct hvcs_struct *hvcsd = from_vio_dev(viod); + unsigned long flags; + int retval; + + spin_lock_irqsave(&hvcsd->lock, flags); + retval = sprintf(buf, "%X\n", hvcsd->p_unit_address); + spin_unlock_irqrestore(&hvcsd->lock, flags); + return retval; +} +static DEVICE_ATTR(partner_vtys, S_IRUGO, hvcs_partner_vtys_show, NULL); + +static ssize_t hvcs_partner_clcs_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct vio_dev *viod = to_vio_dev(dev); + struct hvcs_struct *hvcsd = from_vio_dev(viod); + unsigned long flags; + int retval; + + spin_lock_irqsave(&hvcsd->lock, flags); + retval = sprintf(buf, "%s\n", &hvcsd->p_location_code[0]); + spin_unlock_irqrestore(&hvcsd->lock, flags); + return retval; +} +static DEVICE_ATTR(partner_clcs, S_IRUGO, hvcs_partner_clcs_show, NULL); + +static ssize_t hvcs_current_vty_store(struct device *dev, struct device_attribute *attr, const char * buf, + size_t count) +{ + /* + * Don't need this feature at the present time because firmware doesn't + * yet support multiple partners. + */ + printk(KERN_INFO "HVCS: Denied current_vty change: -EPERM.\n"); + return -EPERM; +} + +static ssize_t hvcs_current_vty_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct vio_dev *viod = to_vio_dev(dev); + struct hvcs_struct *hvcsd = from_vio_dev(viod); + unsigned long flags; + int retval; + + spin_lock_irqsave(&hvcsd->lock, flags); + retval = sprintf(buf, "%s\n", &hvcsd->p_location_code[0]); + spin_unlock_irqrestore(&hvcsd->lock, flags); + return retval; +} + +static DEVICE_ATTR(current_vty, + S_IRUGO | S_IWUSR, hvcs_current_vty_show, hvcs_current_vty_store); + +static ssize_t hvcs_vterm_state_store(struct device *dev, struct device_attribute *attr, const char *buf, + size_t count) +{ + struct vio_dev *viod = to_vio_dev(dev); + struct hvcs_struct *hvcsd = from_vio_dev(viod); + unsigned long flags; + + /* writing a '0' to this sysfs entry will result in the disconnect. */ + if (simple_strtol(buf, NULL, 0) != 0) + return -EINVAL; + + spin_lock_irqsave(&hvcsd->lock, flags); + + if (hvcsd->open_count > 0) { + spin_unlock_irqrestore(&hvcsd->lock, flags); + printk(KERN_INFO "HVCS: vterm state unchanged. " + "The hvcs device node is still in use.\n"); + return -EPERM; + } + + if (hvcsd->connected == 0) { + spin_unlock_irqrestore(&hvcsd->lock, flags); + printk(KERN_INFO "HVCS: vterm state unchanged. The" + " vty-server is not connected to a vty.\n"); + return -EPERM; + } + + hvcs_partner_free(hvcsd); + printk(KERN_INFO "HVCS: Closed vty-server@%X and" + " partner vty@%X:%d connection.\n", + hvcsd->vdev->unit_address, + hvcsd->p_unit_address, + (uint32_t)hvcsd->p_partition_ID); + + spin_unlock_irqrestore(&hvcsd->lock, flags); + return count; +} + +static ssize_t hvcs_vterm_state_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct vio_dev *viod = to_vio_dev(dev); + struct hvcs_struct *hvcsd = from_vio_dev(viod); + unsigned long flags; + int retval; + + spin_lock_irqsave(&hvcsd->lock, flags); + retval = sprintf(buf, "%d\n", hvcsd->connected); + spin_unlock_irqrestore(&hvcsd->lock, flags); + return retval; +} +static DEVICE_ATTR(vterm_state, S_IRUGO | S_IWUSR, + hvcs_vterm_state_show, hvcs_vterm_state_store); + +static ssize_t hvcs_index_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct vio_dev *viod = to_vio_dev(dev); + struct hvcs_struct *hvcsd = from_vio_dev(viod); + unsigned long flags; + int retval; + + spin_lock_irqsave(&hvcsd->lock, flags); + retval = sprintf(buf, "%d\n", hvcsd->index); + spin_unlock_irqrestore(&hvcsd->lock, flags); + return retval; +} + +static DEVICE_ATTR(index, S_IRUGO, hvcs_index_show, NULL); + +static struct attribute *hvcs_attrs[] = { + &dev_attr_partner_vtys.attr, + &dev_attr_partner_clcs.attr, + &dev_attr_current_vty.attr, + &dev_attr_vterm_state.attr, + &dev_attr_index.attr, + NULL, +}; + +static struct attribute_group hvcs_attr_group = { + .attrs = hvcs_attrs, +}; + +static ssize_t hvcs_rescan_show(struct device_driver *ddp, char *buf) +{ + /* A 1 means it is updating, a 0 means it is done updating */ + return snprintf(buf, PAGE_SIZE, "%d\n", hvcs_rescan_status); +} + +static ssize_t hvcs_rescan_store(struct device_driver *ddp, const char * buf, + size_t count) +{ + if ((simple_strtol(buf, NULL, 0) != 1) + && (hvcs_rescan_status != 0)) + return -EINVAL; + + hvcs_rescan_status = 1; + printk(KERN_INFO "HVCS: rescanning partner info for all" + " vty-servers.\n"); + hvcs_rescan_devices_list(); + hvcs_rescan_status = 0; + return count; +} + +static DRIVER_ATTR(rescan, + S_IRUGO | S_IWUSR, hvcs_rescan_show, hvcs_rescan_store); + +static void hvcs_kick(void) +{ + hvcs_kicked = 1; + wmb(); + wake_up_process(hvcs_task); +} + +static void hvcs_unthrottle(struct tty_struct *tty) +{ + struct hvcs_struct *hvcsd = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&hvcsd->lock, flags); + hvcsd->todo_mask |= HVCS_SCHED_READ; + spin_unlock_irqrestore(&hvcsd->lock, flags); + hvcs_kick(); +} + +static void hvcs_throttle(struct tty_struct *tty) +{ + struct hvcs_struct *hvcsd = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&hvcsd->lock, flags); + vio_disable_interrupts(hvcsd->vdev); + spin_unlock_irqrestore(&hvcsd->lock, flags); +} + +/* + * If the device is being removed we don't have to worry about this interrupt + * handler taking any further interrupts because they are disabled which means + * the hvcs_struct will always be valid in this handler. + */ +static irqreturn_t hvcs_handle_interrupt(int irq, void *dev_instance) +{ + struct hvcs_struct *hvcsd = dev_instance; + + spin_lock(&hvcsd->lock); + vio_disable_interrupts(hvcsd->vdev); + hvcsd->todo_mask |= HVCS_SCHED_READ; + spin_unlock(&hvcsd->lock); + hvcs_kick(); + + return IRQ_HANDLED; +} + +/* This function must be called with the hvcsd->lock held */ +static void hvcs_try_write(struct hvcs_struct *hvcsd) +{ + uint32_t unit_address = hvcsd->vdev->unit_address; + struct tty_struct *tty = hvcsd->tty; + int sent; + + if (hvcsd->todo_mask & HVCS_TRY_WRITE) { + /* won't send partial writes */ + sent = hvc_put_chars(unit_address, + &hvcsd->buffer[0], + hvcsd->chars_in_buffer ); + if (sent > 0) { + hvcsd->chars_in_buffer = 0; + /* wmb(); */ + hvcsd->todo_mask &= ~(HVCS_TRY_WRITE); + /* wmb(); */ + + /* + * We are still obligated to deliver the data to the + * hypervisor even if the tty has been closed because + * we commited to delivering it. But don't try to wake + * a non-existent tty. + */ + if (tty) { + tty_wakeup(tty); + } + } + } +} + +static int hvcs_io(struct hvcs_struct *hvcsd) +{ + uint32_t unit_address; + struct tty_struct *tty; + char buf[HVCS_BUFF_LEN] __ALIGNED__; + unsigned long flags; + int got = 0; + + spin_lock_irqsave(&hvcsd->lock, flags); + + unit_address = hvcsd->vdev->unit_address; + tty = hvcsd->tty; + + hvcs_try_write(hvcsd); + + if (!tty || test_bit(TTY_THROTTLED, &tty->flags)) { + hvcsd->todo_mask &= ~(HVCS_READ_MASK); + goto bail; + } else if (!(hvcsd->todo_mask & (HVCS_READ_MASK))) + goto bail; + + /* remove the read masks */ + hvcsd->todo_mask &= ~(HVCS_READ_MASK); + + if (tty_buffer_request_room(tty, HVCS_BUFF_LEN) >= HVCS_BUFF_LEN) { + got = hvc_get_chars(unit_address, + &buf[0], + HVCS_BUFF_LEN); + tty_insert_flip_string(tty, buf, got); + } + + /* Give the TTY time to process the data we just sent. */ + if (got) + hvcsd->todo_mask |= HVCS_QUICK_READ; + + spin_unlock_irqrestore(&hvcsd->lock, flags); + /* This is synch because tty->low_latency == 1 */ + if(got) + tty_flip_buffer_push(tty); + + if (!got) { + /* Do this _after_ the flip_buffer_push */ + spin_lock_irqsave(&hvcsd->lock, flags); + vio_enable_interrupts(hvcsd->vdev); + spin_unlock_irqrestore(&hvcsd->lock, flags); + } + + return hvcsd->todo_mask; + + bail: + spin_unlock_irqrestore(&hvcsd->lock, flags); + return hvcsd->todo_mask; +} + +static int khvcsd(void *unused) +{ + struct hvcs_struct *hvcsd; + int hvcs_todo_mask; + + __set_current_state(TASK_RUNNING); + + do { + hvcs_todo_mask = 0; + hvcs_kicked = 0; + wmb(); + + spin_lock(&hvcs_structs_lock); + list_for_each_entry(hvcsd, &hvcs_structs, next) { + hvcs_todo_mask |= hvcs_io(hvcsd); + } + spin_unlock(&hvcs_structs_lock); + + /* + * If any of the hvcs adapters want to try a write or quick read + * don't schedule(), yield a smidgen then execute the hvcs_io + * thread again for those that want the write. + */ + if (hvcs_todo_mask & (HVCS_TRY_WRITE | HVCS_QUICK_READ)) { + yield(); + continue; + } + + set_current_state(TASK_INTERRUPTIBLE); + if (!hvcs_kicked) + schedule(); + __set_current_state(TASK_RUNNING); + } while (!kthread_should_stop()); + + return 0; +} + +static struct vio_device_id hvcs_driver_table[] __devinitdata= { + {"serial-server", "hvterm2"}, + { "", "" } +}; +MODULE_DEVICE_TABLE(vio, hvcs_driver_table); + +static void hvcs_return_index(int index) +{ + /* Paranoia check */ + if (!hvcs_index_list) + return; + if (index < 0 || index >= hvcs_index_count) + return; + if (hvcs_index_list[index] == -1) + return; + else + hvcs_index_list[index] = -1; +} + +/* callback when the kref ref count reaches zero */ +static void destroy_hvcs_struct(struct kref *kref) +{ + struct hvcs_struct *hvcsd = from_kref(kref); + struct vio_dev *vdev; + unsigned long flags; + + spin_lock(&hvcs_structs_lock); + spin_lock_irqsave(&hvcsd->lock, flags); + + /* the list_del poisons the pointers */ + list_del(&(hvcsd->next)); + + if (hvcsd->connected == 1) { + hvcs_partner_free(hvcsd); + printk(KERN_INFO "HVCS: Closed vty-server@%X and" + " partner vty@%X:%d connection.\n", + hvcsd->vdev->unit_address, + hvcsd->p_unit_address, + (uint32_t)hvcsd->p_partition_ID); + } + printk(KERN_INFO "HVCS: Destroyed hvcs_struct for vty-server@%X.\n", + hvcsd->vdev->unit_address); + + vdev = hvcsd->vdev; + hvcsd->vdev = NULL; + + hvcsd->p_unit_address = 0; + hvcsd->p_partition_ID = 0; + hvcs_return_index(hvcsd->index); + memset(&hvcsd->p_location_code[0], 0x00, HVCS_CLC_LENGTH + 1); + + spin_unlock_irqrestore(&hvcsd->lock, flags); + spin_unlock(&hvcs_structs_lock); + + sysfs_remove_group(&vdev->dev.kobj, &hvcs_attr_group); + + kfree(hvcsd); +} + +static int hvcs_get_index(void) +{ + int i; + /* Paranoia check */ + if (!hvcs_index_list) { + printk(KERN_ERR "HVCS: hvcs_index_list NOT valid!.\n"); + return -EFAULT; + } + /* Find the numerically lowest first free index. */ + for(i = 0; i < hvcs_index_count; i++) { + if (hvcs_index_list[i] == -1) { + hvcs_index_list[i] = 0; + return i; + } + } + return -1; +} + +static int __devinit hvcs_probe( + struct vio_dev *dev, + const struct vio_device_id *id) +{ + struct hvcs_struct *hvcsd; + int index; + int retval; + + if (!dev || !id) { + printk(KERN_ERR "HVCS: probed with invalid parameter.\n"); + return -EPERM; + } + + /* early to avoid cleanup on failure */ + index = hvcs_get_index(); + if (index < 0) { + return -EFAULT; + } + + hvcsd = kzalloc(sizeof(*hvcsd), GFP_KERNEL); + if (!hvcsd) + return -ENODEV; + + + spin_lock_init(&hvcsd->lock); + /* Automatically incs the refcount the first time */ + kref_init(&hvcsd->kref); + + hvcsd->vdev = dev; + dev_set_drvdata(&dev->dev, hvcsd); + + hvcsd->index = index; + + /* hvcsd->index = ++hvcs_struct_count; */ + hvcsd->chars_in_buffer = 0; + hvcsd->todo_mask = 0; + hvcsd->connected = 0; + + /* + * This will populate the hvcs_struct's partner info fields for the + * first time. + */ + if (hvcs_get_pi(hvcsd)) { + printk(KERN_ERR "HVCS: Failed to fetch partner" + " info for vty-server@%X on device probe.\n", + hvcsd->vdev->unit_address); + } + + /* + * If a user app opens a tty that corresponds to this vty-server before + * the hvcs_struct has been added to the devices list then the user app + * will get -ENODEV. + */ + spin_lock(&hvcs_structs_lock); + list_add_tail(&(hvcsd->next), &hvcs_structs); + spin_unlock(&hvcs_structs_lock); + + retval = sysfs_create_group(&dev->dev.kobj, &hvcs_attr_group); + if (retval) { + printk(KERN_ERR "HVCS: Can't create sysfs attrs for vty-server@%X\n", + hvcsd->vdev->unit_address); + return retval; + } + + printk(KERN_INFO "HVCS: vty-server@%X added to the vio bus.\n", dev->unit_address); + + /* + * DON'T enable interrupts here because there is no user to receive the + * data. + */ + return 0; +} + +static int __devexit hvcs_remove(struct vio_dev *dev) +{ + struct hvcs_struct *hvcsd = dev_get_drvdata(&dev->dev); + unsigned long flags; + struct tty_struct *tty; + + if (!hvcsd) + return -ENODEV; + + /* By this time the vty-server won't be getting any more interrupts */ + + spin_lock_irqsave(&hvcsd->lock, flags); + + tty = hvcsd->tty; + + spin_unlock_irqrestore(&hvcsd->lock, flags); + + /* + * Let the last holder of this object cause it to be removed, which + * would probably be tty_hangup below. + */ + kref_put(&hvcsd->kref, destroy_hvcs_struct); + + /* + * The hangup is a scheduled function which will auto chain call + * hvcs_hangup. The tty should always be valid at this time unless a + * simultaneous tty close already cleaned up the hvcs_struct. + */ + if (tty) + tty_hangup(tty); + + printk(KERN_INFO "HVCS: vty-server@%X removed from the" + " vio bus.\n", dev->unit_address); + return 0; +}; + +static struct vio_driver hvcs_vio_driver = { + .id_table = hvcs_driver_table, + .probe = hvcs_probe, + .remove = __devexit_p(hvcs_remove), + .driver = { + .name = hvcs_driver_name, + .owner = THIS_MODULE, + } +}; + +/* Only called from hvcs_get_pi please */ +static void hvcs_set_pi(struct hvcs_partner_info *pi, struct hvcs_struct *hvcsd) +{ + int clclength; + + hvcsd->p_unit_address = pi->unit_address; + hvcsd->p_partition_ID = pi->partition_ID; + clclength = strlen(&pi->location_code[0]); + if (clclength > HVCS_CLC_LENGTH) + clclength = HVCS_CLC_LENGTH; + + /* copy the null-term char too */ + strncpy(&hvcsd->p_location_code[0], + &pi->location_code[0], clclength + 1); +} + +/* + * Traverse the list and add the partner info that is found to the hvcs_struct + * struct entry. NOTE: At this time I know that partner info will return a + * single entry but in the future there may be multiple partner info entries per + * vty-server and you'll want to zero out that list and reset it. If for some + * reason you have an old version of this driver but there IS more than one + * partner info then hvcsd->p_* will hold the last partner info data from the + * firmware query. A good way to update this code would be to replace the three + * partner info fields in hvcs_struct with a list of hvcs_partner_info + * instances. + * + * This function must be called with the hvcsd->lock held. + */ +static int hvcs_get_pi(struct hvcs_struct *hvcsd) +{ + struct hvcs_partner_info *pi; + uint32_t unit_address = hvcsd->vdev->unit_address; + struct list_head head; + int retval; + + spin_lock(&hvcs_pi_lock); + if (!hvcs_pi_buff) { + spin_unlock(&hvcs_pi_lock); + return -EFAULT; + } + retval = hvcs_get_partner_info(unit_address, &head, hvcs_pi_buff); + spin_unlock(&hvcs_pi_lock); + if (retval) { + printk(KERN_ERR "HVCS: Failed to fetch partner" + " info for vty-server@%x.\n", unit_address); + return retval; + } + + /* nixes the values if the partner vty went away */ + hvcsd->p_unit_address = 0; + hvcsd->p_partition_ID = 0; + + list_for_each_entry(pi, &head, node) + hvcs_set_pi(pi, hvcsd); + + hvcs_free_partner_info(&head); + return 0; +} + +/* + * This function is executed by the driver "rescan" sysfs entry. It shouldn't + * be executed elsewhere, in order to prevent deadlock issues. + */ +static int hvcs_rescan_devices_list(void) +{ + struct hvcs_struct *hvcsd; + unsigned long flags; + + spin_lock(&hvcs_structs_lock); + + list_for_each_entry(hvcsd, &hvcs_structs, next) { + spin_lock_irqsave(&hvcsd->lock, flags); + hvcs_get_pi(hvcsd); + spin_unlock_irqrestore(&hvcsd->lock, flags); + } + + spin_unlock(&hvcs_structs_lock); + + return 0; +} + +/* + * Farm this off into its own function because it could be more complex once + * multiple partners support is added. This function should be called with + * the hvcsd->lock held. + */ +static int hvcs_has_pi(struct hvcs_struct *hvcsd) +{ + if ((!hvcsd->p_unit_address) || (!hvcsd->p_partition_ID)) + return 0; + return 1; +} + +/* + * NOTE: It is possible that the super admin removed a partner vty and then + * added a different vty as the new partner. + * + * This function must be called with the hvcsd->lock held. + */ +static int hvcs_partner_connect(struct hvcs_struct *hvcsd) +{ + int retval; + unsigned int unit_address = hvcsd->vdev->unit_address; + + /* + * If there wasn't any pi when the device was added it doesn't meant + * there isn't any now. This driver isn't notified when a new partner + * vty is added to a vty-server so we discover changes on our own. + * Please see comments in hvcs_register_connection() for justification + * of this bizarre code. + */ + retval = hvcs_register_connection(unit_address, + hvcsd->p_partition_ID, + hvcsd->p_unit_address); + if (!retval) { + hvcsd->connected = 1; + return 0; + } else if (retval != -EINVAL) + return retval; + + /* + * As per the spec re-get the pi and try again if -EINVAL after the + * first connection attempt. + */ + if (hvcs_get_pi(hvcsd)) + return -ENOMEM; + + if (!hvcs_has_pi(hvcsd)) + return -ENODEV; + + retval = hvcs_register_connection(unit_address, + hvcsd->p_partition_ID, + hvcsd->p_unit_address); + if (retval != -EINVAL) { + hvcsd->connected = 1; + return retval; + } + + /* + * EBUSY is the most likely scenario though the vty could have been + * removed or there really could be an hcall error due to the parameter + * data but thanks to ambiguous firmware return codes we can't really + * tell. + */ + printk(KERN_INFO "HVCS: vty-server or partner" + " vty is busy. Try again later.\n"); + return -EBUSY; +} + +/* This function must be called with the hvcsd->lock held */ +static void hvcs_partner_free(struct hvcs_struct *hvcsd) +{ + int retval; + do { + retval = hvcs_free_connection(hvcsd->vdev->unit_address); + } while (retval == -EBUSY); + hvcsd->connected = 0; +} + +/* This helper function must be called WITHOUT the hvcsd->lock held */ +static int hvcs_enable_device(struct hvcs_struct *hvcsd, uint32_t unit_address, + unsigned int irq, struct vio_dev *vdev) +{ + unsigned long flags; + int rc; + + /* + * It is possible that the vty-server was removed between the time that + * the conn was registered and now. + */ + if (!(rc = request_irq(irq, &hvcs_handle_interrupt, + IRQF_DISABLED, "ibmhvcs", hvcsd))) { + /* + * It is possible the vty-server was removed after the irq was + * requested but before we have time to enable interrupts. + */ + if (vio_enable_interrupts(vdev) == H_SUCCESS) + return 0; + else { + printk(KERN_ERR "HVCS: int enable failed for" + " vty-server@%X.\n", unit_address); + free_irq(irq, hvcsd); + } + } else + printk(KERN_ERR "HVCS: irq req failed for" + " vty-server@%X.\n", unit_address); + + spin_lock_irqsave(&hvcsd->lock, flags); + hvcs_partner_free(hvcsd); + spin_unlock_irqrestore(&hvcsd->lock, flags); + + return rc; + +} + +/* + * This always increments the kref ref count if the call is successful. + * Please remember to dec when you are done with the instance. + * + * NOTICE: Do NOT hold either the hvcs_struct.lock or hvcs_structs_lock when + * calling this function or you will get deadlock. + */ +static struct hvcs_struct *hvcs_get_by_index(int index) +{ + struct hvcs_struct *hvcsd = NULL; + unsigned long flags; + + spin_lock(&hvcs_structs_lock); + /* We can immediately discard OOB requests */ + if (index >= 0 && index < HVCS_MAX_SERVER_ADAPTERS) { + list_for_each_entry(hvcsd, &hvcs_structs, next) { + spin_lock_irqsave(&hvcsd->lock, flags); + if (hvcsd->index == index) { + kref_get(&hvcsd->kref); + spin_unlock_irqrestore(&hvcsd->lock, flags); + spin_unlock(&hvcs_structs_lock); + return hvcsd; + } + spin_unlock_irqrestore(&hvcsd->lock, flags); + } + hvcsd = NULL; + } + + spin_unlock(&hvcs_structs_lock); + return hvcsd; +} + +/* + * This is invoked via the tty_open interface when a user app connects to the + * /dev node. + */ +static int hvcs_open(struct tty_struct *tty, struct file *filp) +{ + struct hvcs_struct *hvcsd; + int rc, retval = 0; + unsigned long flags; + unsigned int irq; + struct vio_dev *vdev; + unsigned long unit_address; + + if (tty->driver_data) + goto fast_open; + + /* + * Is there a vty-server that shares the same index? + * This function increments the kref index. + */ + if (!(hvcsd = hvcs_get_by_index(tty->index))) { + printk(KERN_WARNING "HVCS: open failed, no device associated" + " with tty->index %d.\n", tty->index); + return -ENODEV; + } + + spin_lock_irqsave(&hvcsd->lock, flags); + + if (hvcsd->connected == 0) + if ((retval = hvcs_partner_connect(hvcsd))) + goto error_release; + + hvcsd->open_count = 1; + hvcsd->tty = tty; + tty->driver_data = hvcsd; + + memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN); + + /* + * Save these in the spinlock for the enable operations that need them + * outside of the spinlock. + */ + irq = hvcsd->vdev->irq; + vdev = hvcsd->vdev; + unit_address = hvcsd->vdev->unit_address; + + hvcsd->todo_mask |= HVCS_SCHED_READ; + spin_unlock_irqrestore(&hvcsd->lock, flags); + + /* + * This must be done outside of the spinlock because it requests irqs + * and will grab the spinlock and free the connection if it fails. + */ + if (((rc = hvcs_enable_device(hvcsd, unit_address, irq, vdev)))) { + kref_put(&hvcsd->kref, destroy_hvcs_struct); + printk(KERN_WARNING "HVCS: enable device failed.\n"); + return rc; + } + + goto open_success; + +fast_open: + hvcsd = tty->driver_data; + + spin_lock_irqsave(&hvcsd->lock, flags); + kref_get(&hvcsd->kref); + hvcsd->open_count++; + hvcsd->todo_mask |= HVCS_SCHED_READ; + spin_unlock_irqrestore(&hvcsd->lock, flags); + +open_success: + hvcs_kick(); + + printk(KERN_INFO "HVCS: vty-server@%X connection opened.\n", + hvcsd->vdev->unit_address ); + + return 0; + +error_release: + spin_unlock_irqrestore(&hvcsd->lock, flags); + kref_put(&hvcsd->kref, destroy_hvcs_struct); + + printk(KERN_WARNING "HVCS: partner connect failed.\n"); + return retval; +} + +static void hvcs_close(struct tty_struct *tty, struct file *filp) +{ + struct hvcs_struct *hvcsd; + unsigned long flags; + int irq = NO_IRQ; + + /* + * Is someone trying to close the file associated with this device after + * we have hung up? If so tty->driver_data wouldn't be valid. + */ + if (tty_hung_up_p(filp)) + return; + + /* + * No driver_data means that this close was probably issued after a + * failed hvcs_open by the tty layer's release_dev() api and we can just + * exit cleanly. + */ + if (!tty->driver_data) + return; + + hvcsd = tty->driver_data; + + spin_lock_irqsave(&hvcsd->lock, flags); + if (--hvcsd->open_count == 0) { + + vio_disable_interrupts(hvcsd->vdev); + + /* + * NULL this early so that the kernel_thread doesn't try to + * execute any operations on the TTY even though it is obligated + * to deliver any pending I/O to the hypervisor. + */ + hvcsd->tty = NULL; + + irq = hvcsd->vdev->irq; + spin_unlock_irqrestore(&hvcsd->lock, flags); + + tty_wait_until_sent(tty, HVCS_CLOSE_WAIT); + + /* + * This line is important because it tells hvcs_open that this + * device needs to be re-configured the next time hvcs_open is + * called. + */ + tty->driver_data = NULL; + + free_irq(irq, hvcsd); + kref_put(&hvcsd->kref, destroy_hvcs_struct); + return; + } else if (hvcsd->open_count < 0) { + printk(KERN_ERR "HVCS: vty-server@%X open_count: %d" + " is missmanaged.\n", + hvcsd->vdev->unit_address, hvcsd->open_count); + } + + spin_unlock_irqrestore(&hvcsd->lock, flags); + kref_put(&hvcsd->kref, destroy_hvcs_struct); +} + +static void hvcs_hangup(struct tty_struct * tty) +{ + struct hvcs_struct *hvcsd = tty->driver_data; + unsigned long flags; + int temp_open_count; + int irq = NO_IRQ; + + spin_lock_irqsave(&hvcsd->lock, flags); + /* Preserve this so that we know how many kref refs to put */ + temp_open_count = hvcsd->open_count; + + /* + * Don't kref put inside the spinlock because the destruction + * callback may use the spinlock and it may get called before the + * spinlock has been released. + */ + vio_disable_interrupts(hvcsd->vdev); + + hvcsd->todo_mask = 0; + + /* I don't think the tty needs the hvcs_struct pointer after a hangup */ + hvcsd->tty->driver_data = NULL; + hvcsd->tty = NULL; + + hvcsd->open_count = 0; + + /* This will drop any buffered data on the floor which is OK in a hangup + * scenario. */ + memset(&hvcsd->buffer[0], 0x00, HVCS_BUFF_LEN); + hvcsd->chars_in_buffer = 0; + + irq = hvcsd->vdev->irq; + + spin_unlock_irqrestore(&hvcsd->lock, flags); + + free_irq(irq, hvcsd); + + /* + * We need to kref_put() for every open_count we have since the + * tty_hangup() function doesn't invoke a close per open connection on a + * non-console device. + */ + while(temp_open_count) { + --temp_open_count; + /* + * The final put will trigger destruction of the hvcs_struct. + * NOTE: If this hangup was signaled from user space then the + * final put will never happen. + */ + kref_put(&hvcsd->kref, destroy_hvcs_struct); + } +} + +/* + * NOTE: This is almost always from_user since user level apps interact with the + * /dev nodes. I'm trusting that if hvcs_write gets called and interrupted by + * hvcs_remove (which removes the target device and executes tty_hangup()) that + * tty_hangup will allow hvcs_write time to complete execution before it + * terminates our device. + */ +static int hvcs_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct hvcs_struct *hvcsd = tty->driver_data; + unsigned int unit_address; + const unsigned char *charbuf; + unsigned long flags; + int total_sent = 0; + int tosend = 0; + int result = 0; + + /* + * If they don't check the return code off of their open they may + * attempt this even if there is no connected device. + */ + if (!hvcsd) + return -ENODEV; + + /* Reasonable size to prevent user level flooding */ + if (count > HVCS_MAX_FROM_USER) { + printk(KERN_WARNING "HVCS write: count being truncated to" + " HVCS_MAX_FROM_USER.\n"); + count = HVCS_MAX_FROM_USER; + } + + charbuf = buf; + + spin_lock_irqsave(&hvcsd->lock, flags); + + /* + * Somehow an open succedded but the device was removed or the + * connection terminated between the vty-server and partner vty during + * the middle of a write operation? This is a crummy place to do this + * but we want to keep it all in the spinlock. + */ + if (hvcsd->open_count <= 0) { + spin_unlock_irqrestore(&hvcsd->lock, flags); + return -ENODEV; + } + + unit_address = hvcsd->vdev->unit_address; + + while (count > 0) { + tosend = min(count, (HVCS_BUFF_LEN - hvcsd->chars_in_buffer)); + /* + * No more space, this probably means that the last call to + * hvcs_write() didn't succeed and the buffer was filled up. + */ + if (!tosend) + break; + + memcpy(&hvcsd->buffer[hvcsd->chars_in_buffer], + &charbuf[total_sent], + tosend); + + hvcsd->chars_in_buffer += tosend; + + result = 0; + + /* + * If this is true then we don't want to try writing to the + * hypervisor because that is the kernel_threads job now. We'll + * just add to the buffer. + */ + if (!(hvcsd->todo_mask & HVCS_TRY_WRITE)) + /* won't send partial writes */ + result = hvc_put_chars(unit_address, + &hvcsd->buffer[0], + hvcsd->chars_in_buffer); + + /* + * Since we know we have enough room in hvcsd->buffer for + * tosend we record that it was sent regardless of whether the + * hypervisor actually took it because we have it buffered. + */ + total_sent+=tosend; + count-=tosend; + if (result == 0) { + hvcsd->todo_mask |= HVCS_TRY_WRITE; + hvcs_kick(); + break; + } + + hvcsd->chars_in_buffer = 0; + /* + * Test after the chars_in_buffer reset otherwise this could + * deadlock our writes if hvc_put_chars fails. + */ + if (result < 0) + break; + } + + spin_unlock_irqrestore(&hvcsd->lock, flags); + + if (result == -1) + return -EIO; + else + return total_sent; +} + +/* + * This is really asking how much can we guarentee that we can send or that we + * absolutely WILL BUFFER if we can't send it. This driver MUST honor the + * return value, hence the reason for hvcs_struct buffering. + */ +static int hvcs_write_room(struct tty_struct *tty) +{ + struct hvcs_struct *hvcsd = tty->driver_data; + + if (!hvcsd || hvcsd->open_count <= 0) + return 0; + + return HVCS_BUFF_LEN - hvcsd->chars_in_buffer; +} + +static int hvcs_chars_in_buffer(struct tty_struct *tty) +{ + struct hvcs_struct *hvcsd = tty->driver_data; + + return hvcsd->chars_in_buffer; +} + +static const struct tty_operations hvcs_ops = { + .open = hvcs_open, + .close = hvcs_close, + .hangup = hvcs_hangup, + .write = hvcs_write, + .write_room = hvcs_write_room, + .chars_in_buffer = hvcs_chars_in_buffer, + .unthrottle = hvcs_unthrottle, + .throttle = hvcs_throttle, +}; + +static int hvcs_alloc_index_list(int n) +{ + int i; + + hvcs_index_list = kmalloc(n * sizeof(hvcs_index_count),GFP_KERNEL); + if (!hvcs_index_list) + return -ENOMEM; + hvcs_index_count = n; + for (i = 0; i < hvcs_index_count; i++) + hvcs_index_list[i] = -1; + return 0; +} + +static void hvcs_free_index_list(void) +{ + /* Paranoia check to be thorough. */ + kfree(hvcs_index_list); + hvcs_index_list = NULL; + hvcs_index_count = 0; +} + +static int __init hvcs_module_init(void) +{ + int rc; + int num_ttys_to_alloc; + + printk(KERN_INFO "Initializing %s\n", hvcs_driver_string); + + /* Has the user specified an overload with an insmod param? */ + if (hvcs_parm_num_devs <= 0 || + (hvcs_parm_num_devs > HVCS_MAX_SERVER_ADAPTERS)) { + num_ttys_to_alloc = HVCS_DEFAULT_SERVER_ADAPTERS; + } else + num_ttys_to_alloc = hvcs_parm_num_devs; + + hvcs_tty_driver = alloc_tty_driver(num_ttys_to_alloc); + if (!hvcs_tty_driver) + return -ENOMEM; + + if (hvcs_alloc_index_list(num_ttys_to_alloc)) { + rc = -ENOMEM; + goto index_fail; + } + + hvcs_tty_driver->owner = THIS_MODULE; + + hvcs_tty_driver->driver_name = hvcs_driver_name; + hvcs_tty_driver->name = hvcs_device_node; + + /* + * We'll let the system assign us a major number, indicated by leaving + * it blank. + */ + + hvcs_tty_driver->minor_start = HVCS_MINOR_START; + hvcs_tty_driver->type = TTY_DRIVER_TYPE_SYSTEM; + + /* + * We role our own so that we DONT ECHO. We can't echo because the + * device we are connecting to already echoes by default and this would + * throw us into a horrible recursive echo-echo-echo loop. + */ + hvcs_tty_driver->init_termios = hvcs_tty_termios; + hvcs_tty_driver->flags = TTY_DRIVER_REAL_RAW; + + tty_set_operations(hvcs_tty_driver, &hvcs_ops); + + /* + * The following call will result in sysfs entries that denote the + * dynamically assigned major and minor numbers for our devices. + */ + if (tty_register_driver(hvcs_tty_driver)) { + printk(KERN_ERR "HVCS: registration as a tty driver failed.\n"); + rc = -EIO; + goto register_fail; + } + + hvcs_pi_buff = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!hvcs_pi_buff) { + rc = -ENOMEM; + goto buff_alloc_fail; + } + + hvcs_task = kthread_run(khvcsd, NULL, "khvcsd"); + if (IS_ERR(hvcs_task)) { + printk(KERN_ERR "HVCS: khvcsd creation failed. Driver not loaded.\n"); + rc = -EIO; + goto kthread_fail; + } + + rc = vio_register_driver(&hvcs_vio_driver); + if (rc) { + printk(KERN_ERR "HVCS: can't register vio driver\n"); + goto vio_fail; + } + + /* + * This needs to be done AFTER the vio_register_driver() call or else + * the kobjects won't be initialized properly. + */ + rc = driver_create_file(&(hvcs_vio_driver.driver), &driver_attr_rescan); + if (rc) { + printk(KERN_ERR "HVCS: sysfs attr create failed\n"); + goto attr_fail; + } + + printk(KERN_INFO "HVCS: driver module inserted.\n"); + + return 0; + +attr_fail: + vio_unregister_driver(&hvcs_vio_driver); +vio_fail: + kthread_stop(hvcs_task); +kthread_fail: + kfree(hvcs_pi_buff); +buff_alloc_fail: + tty_unregister_driver(hvcs_tty_driver); +register_fail: + hvcs_free_index_list(); +index_fail: + put_tty_driver(hvcs_tty_driver); + hvcs_tty_driver = NULL; + return rc; +} + +static void __exit hvcs_module_exit(void) +{ + /* + * This driver receives hvcs_remove callbacks for each device upon + * module removal. + */ + + /* + * This synchronous operation will wake the khvcsd kthread if it is + * asleep and will return when khvcsd has terminated. + */ + kthread_stop(hvcs_task); + + spin_lock(&hvcs_pi_lock); + kfree(hvcs_pi_buff); + hvcs_pi_buff = NULL; + spin_unlock(&hvcs_pi_lock); + + driver_remove_file(&hvcs_vio_driver.driver, &driver_attr_rescan); + + vio_unregister_driver(&hvcs_vio_driver); + + tty_unregister_driver(hvcs_tty_driver); + + hvcs_free_index_list(); + + put_tty_driver(hvcs_tty_driver); + + printk(KERN_INFO "HVCS: driver module removed.\n"); +} + +module_init(hvcs_module_init); +module_exit(hvcs_module_exit); diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c new file mode 100644 index 000000000000..67a75a502c01 --- /dev/null +++ b/drivers/tty/hvc/hvsi.c @@ -0,0 +1,1314 @@ +/* + * Copyright (C) 2004 Hollis Blanchard , IBM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* Host Virtual Serial Interface (HVSI) is a protocol between the hosted OS + * and the service processor on IBM pSeries servers. On these servers, there + * are no serial ports under the OS's control, and sometimes there is no other + * console available either. However, the service processor has two standard + * serial ports, so this over-complicated protocol allows the OS to control + * those ports by proxy. + * + * Besides data, the procotol supports the reading/writing of the serial + * port's DTR line, and the reading of the CD line. This is to allow the OS to + * control a modem attached to the service processor's serial port. Note that + * the OS cannot change the speed of the port through this protocol. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define HVSI_MAJOR 229 +#define HVSI_MINOR 128 +#define MAX_NR_HVSI_CONSOLES 4 + +#define HVSI_TIMEOUT (5*HZ) +#define HVSI_VERSION 1 +#define HVSI_MAX_PACKET 256 +#define HVSI_MAX_READ 16 +#define HVSI_MAX_OUTGOING_DATA 12 +#define N_OUTBUF 12 + +/* + * we pass data via two 8-byte registers, so we would like our char arrays + * properly aligned for those loads. + */ +#define __ALIGNED__ __attribute__((__aligned__(sizeof(long)))) + +struct hvsi_struct { + struct delayed_work writer; + struct work_struct handshaker; + wait_queue_head_t emptyq; /* woken when outbuf is emptied */ + wait_queue_head_t stateq; /* woken when HVSI state changes */ + spinlock_t lock; + int index; + struct tty_struct *tty; + int count; + uint8_t throttle_buf[128]; + uint8_t outbuf[N_OUTBUF]; /* to implement write_room and chars_in_buffer */ + /* inbuf is for packet reassembly. leave a little room for leftovers. */ + uint8_t inbuf[HVSI_MAX_PACKET + HVSI_MAX_READ]; + uint8_t *inbuf_end; + int n_throttle; + int n_outbuf; + uint32_t vtermno; + uint32_t virq; + atomic_t seqno; /* HVSI packet sequence number */ + uint16_t mctrl; + uint8_t state; /* HVSI protocol state */ + uint8_t flags; +#ifdef CONFIG_MAGIC_SYSRQ + uint8_t sysrq; +#endif /* CONFIG_MAGIC_SYSRQ */ +}; +static struct hvsi_struct hvsi_ports[MAX_NR_HVSI_CONSOLES]; + +static struct tty_driver *hvsi_driver; +static int hvsi_count; +static int (*hvsi_wait)(struct hvsi_struct *hp, int state); + +enum HVSI_PROTOCOL_STATE { + HVSI_CLOSED, + HVSI_WAIT_FOR_VER_RESPONSE, + HVSI_WAIT_FOR_VER_QUERY, + HVSI_OPEN, + HVSI_WAIT_FOR_MCTRL_RESPONSE, + HVSI_FSP_DIED, +}; +#define HVSI_CONSOLE 0x1 + +#define VS_DATA_PACKET_HEADER 0xff +#define VS_CONTROL_PACKET_HEADER 0xfe +#define VS_QUERY_PACKET_HEADER 0xfd +#define VS_QUERY_RESPONSE_PACKET_HEADER 0xfc + +/* control verbs */ +#define VSV_SET_MODEM_CTL 1 /* to service processor only */ +#define VSV_MODEM_CTL_UPDATE 2 /* from service processor only */ +#define VSV_CLOSE_PROTOCOL 3 + +/* query verbs */ +#define VSV_SEND_VERSION_NUMBER 1 +#define VSV_SEND_MODEM_CTL_STATUS 2 + +/* yes, these masks are not consecutive. */ +#define HVSI_TSDTR 0x01 +#define HVSI_TSCD 0x20 + +struct hvsi_header { + uint8_t type; + uint8_t len; + uint16_t seqno; +} __attribute__((packed)); + +struct hvsi_data { + uint8_t type; + uint8_t len; + uint16_t seqno; + uint8_t data[HVSI_MAX_OUTGOING_DATA]; +} __attribute__((packed)); + +struct hvsi_control { + uint8_t type; + uint8_t len; + uint16_t seqno; + uint16_t verb; + /* optional depending on verb: */ + uint32_t word; + uint32_t mask; +} __attribute__((packed)); + +struct hvsi_query { + uint8_t type; + uint8_t len; + uint16_t seqno; + uint16_t verb; +} __attribute__((packed)); + +struct hvsi_query_response { + uint8_t type; + uint8_t len; + uint16_t seqno; + uint16_t verb; + uint16_t query_seqno; + union { + uint8_t version; + uint32_t mctrl_word; + } u; +} __attribute__((packed)); + + + +static inline int is_console(struct hvsi_struct *hp) +{ + return hp->flags & HVSI_CONSOLE; +} + +static inline int is_open(struct hvsi_struct *hp) +{ + /* if we're waiting for an mctrl then we're already open */ + return (hp->state == HVSI_OPEN) + || (hp->state == HVSI_WAIT_FOR_MCTRL_RESPONSE); +} + +static inline void print_state(struct hvsi_struct *hp) +{ +#ifdef DEBUG + static const char *state_names[] = { + "HVSI_CLOSED", + "HVSI_WAIT_FOR_VER_RESPONSE", + "HVSI_WAIT_FOR_VER_QUERY", + "HVSI_OPEN", + "HVSI_WAIT_FOR_MCTRL_RESPONSE", + "HVSI_FSP_DIED", + }; + const char *name = (hp->state < ARRAY_SIZE(state_names)) + ? state_names[hp->state] : "UNKNOWN"; + + pr_debug("hvsi%i: state = %s\n", hp->index, name); +#endif /* DEBUG */ +} + +static inline void __set_state(struct hvsi_struct *hp, int state) +{ + hp->state = state; + print_state(hp); + wake_up_all(&hp->stateq); +} + +static inline void set_state(struct hvsi_struct *hp, int state) +{ + unsigned long flags; + + spin_lock_irqsave(&hp->lock, flags); + __set_state(hp, state); + spin_unlock_irqrestore(&hp->lock, flags); +} + +static inline int len_packet(const uint8_t *packet) +{ + return (int)((struct hvsi_header *)packet)->len; +} + +static inline int is_header(const uint8_t *packet) +{ + struct hvsi_header *header = (struct hvsi_header *)packet; + return header->type >= VS_QUERY_RESPONSE_PACKET_HEADER; +} + +static inline int got_packet(const struct hvsi_struct *hp, uint8_t *packet) +{ + if (hp->inbuf_end < packet + sizeof(struct hvsi_header)) + return 0; /* don't even have the packet header */ + + if (hp->inbuf_end < (packet + len_packet(packet))) + return 0; /* don't have the rest of the packet */ + + return 1; +} + +/* shift remaining bytes in packetbuf down */ +static void compact_inbuf(struct hvsi_struct *hp, uint8_t *read_to) +{ + int remaining = (int)(hp->inbuf_end - read_to); + + pr_debug("%s: %i chars remain\n", __func__, remaining); + + if (read_to != hp->inbuf) + memmove(hp->inbuf, read_to, remaining); + + hp->inbuf_end = hp->inbuf + remaining; +} + +#ifdef DEBUG +#define dbg_dump_packet(packet) dump_packet(packet) +#define dbg_dump_hex(data, len) dump_hex(data, len) +#else +#define dbg_dump_packet(packet) do { } while (0) +#define dbg_dump_hex(data, len) do { } while (0) +#endif + +static void dump_hex(const uint8_t *data, int len) +{ + int i; + + printk(" "); + for (i=0; i < len; i++) + printk("%.2x", data[i]); + + printk("\n "); + for (i=0; i < len; i++) { + if (isprint(data[i])) + printk("%c", data[i]); + else + printk("."); + } + printk("\n"); +} + +static void dump_packet(uint8_t *packet) +{ + struct hvsi_header *header = (struct hvsi_header *)packet; + + printk("type 0x%x, len %i, seqno %i:\n", header->type, header->len, + header->seqno); + + dump_hex(packet, header->len); +} + +static int hvsi_read(struct hvsi_struct *hp, char *buf, int count) +{ + unsigned long got; + + got = hvc_get_chars(hp->vtermno, buf, count); + + return got; +} + +static void hvsi_recv_control(struct hvsi_struct *hp, uint8_t *packet, + struct tty_struct **to_hangup, struct hvsi_struct **to_handshake) +{ + struct hvsi_control *header = (struct hvsi_control *)packet; + + switch (header->verb) { + case VSV_MODEM_CTL_UPDATE: + if ((header->word & HVSI_TSCD) == 0) { + /* CD went away; no more connection */ + pr_debug("hvsi%i: CD dropped\n", hp->index); + hp->mctrl &= TIOCM_CD; + /* If userland hasn't done an open(2) yet, hp->tty is NULL. */ + if (hp->tty && !(hp->tty->flags & CLOCAL)) + *to_hangup = hp->tty; + } + break; + case VSV_CLOSE_PROTOCOL: + pr_debug("hvsi%i: service processor came back\n", hp->index); + if (hp->state != HVSI_CLOSED) { + *to_handshake = hp; + } + break; + default: + printk(KERN_WARNING "hvsi%i: unknown HVSI control packet: ", + hp->index); + dump_packet(packet); + break; + } +} + +static void hvsi_recv_response(struct hvsi_struct *hp, uint8_t *packet) +{ + struct hvsi_query_response *resp = (struct hvsi_query_response *)packet; + + switch (hp->state) { + case HVSI_WAIT_FOR_VER_RESPONSE: + __set_state(hp, HVSI_WAIT_FOR_VER_QUERY); + break; + case HVSI_WAIT_FOR_MCTRL_RESPONSE: + hp->mctrl = 0; + if (resp->u.mctrl_word & HVSI_TSDTR) + hp->mctrl |= TIOCM_DTR; + if (resp->u.mctrl_word & HVSI_TSCD) + hp->mctrl |= TIOCM_CD; + __set_state(hp, HVSI_OPEN); + break; + default: + printk(KERN_ERR "hvsi%i: unexpected query response: ", hp->index); + dump_packet(packet); + break; + } +} + +/* respond to service processor's version query */ +static int hvsi_version_respond(struct hvsi_struct *hp, uint16_t query_seqno) +{ + struct hvsi_query_response packet __ALIGNED__; + int wrote; + + packet.type = VS_QUERY_RESPONSE_PACKET_HEADER; + packet.len = sizeof(struct hvsi_query_response); + packet.seqno = atomic_inc_return(&hp->seqno); + packet.verb = VSV_SEND_VERSION_NUMBER; + packet.u.version = HVSI_VERSION; + packet.query_seqno = query_seqno+1; + + pr_debug("%s: sending %i bytes\n", __func__, packet.len); + dbg_dump_hex((uint8_t*)&packet, packet.len); + + wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len); + if (wrote != packet.len) { + printk(KERN_ERR "hvsi%i: couldn't send query response!\n", + hp->index); + return -EIO; + } + + return 0; +} + +static void hvsi_recv_query(struct hvsi_struct *hp, uint8_t *packet) +{ + struct hvsi_query *query = (struct hvsi_query *)packet; + + switch (hp->state) { + case HVSI_WAIT_FOR_VER_QUERY: + hvsi_version_respond(hp, query->seqno); + __set_state(hp, HVSI_OPEN); + break; + default: + printk(KERN_ERR "hvsi%i: unexpected query: ", hp->index); + dump_packet(packet); + break; + } +} + +static void hvsi_insert_chars(struct hvsi_struct *hp, const char *buf, int len) +{ + int i; + + for (i=0; i < len; i++) { + char c = buf[i]; +#ifdef CONFIG_MAGIC_SYSRQ + if (c == '\0') { + hp->sysrq = 1; + continue; + } else if (hp->sysrq) { + handle_sysrq(c); + hp->sysrq = 0; + continue; + } +#endif /* CONFIG_MAGIC_SYSRQ */ + tty_insert_flip_char(hp->tty, c, 0); + } +} + +/* + * We could get 252 bytes of data at once here. But the tty layer only + * throttles us at TTY_THRESHOLD_THROTTLE (128) bytes, so we could overflow + * it. Accordingly we won't send more than 128 bytes at a time to the flip + * buffer, which will give the tty buffer a chance to throttle us. Should the + * value of TTY_THRESHOLD_THROTTLE change in n_tty.c, this code should be + * revisited. + */ +#define TTY_THRESHOLD_THROTTLE 128 +static struct tty_struct *hvsi_recv_data(struct hvsi_struct *hp, + const uint8_t *packet) +{ + const struct hvsi_header *header = (const struct hvsi_header *)packet; + const uint8_t *data = packet + sizeof(struct hvsi_header); + int datalen = header->len - sizeof(struct hvsi_header); + int overflow = datalen - TTY_THRESHOLD_THROTTLE; + + pr_debug("queueing %i chars '%.*s'\n", datalen, datalen, data); + + if (datalen == 0) + return NULL; + + if (overflow > 0) { + pr_debug("%s: got >TTY_THRESHOLD_THROTTLE bytes\n", __func__); + datalen = TTY_THRESHOLD_THROTTLE; + } + + hvsi_insert_chars(hp, data, datalen); + + if (overflow > 0) { + /* + * we still have more data to deliver, so we need to save off the + * overflow and send it later + */ + pr_debug("%s: deferring overflow\n", __func__); + memcpy(hp->throttle_buf, data + TTY_THRESHOLD_THROTTLE, overflow); + hp->n_throttle = overflow; + } + + return hp->tty; +} + +/* + * Returns true/false indicating data successfully read from hypervisor. + * Used both to get packets for tty connections and to advance the state + * machine during console handshaking (in which case tty = NULL and we ignore + * incoming data). + */ +static int hvsi_load_chunk(struct hvsi_struct *hp, struct tty_struct **flip, + struct tty_struct **hangup, struct hvsi_struct **handshake) +{ + uint8_t *packet = hp->inbuf; + int chunklen; + + *flip = NULL; + *hangup = NULL; + *handshake = NULL; + + chunklen = hvsi_read(hp, hp->inbuf_end, HVSI_MAX_READ); + if (chunklen == 0) { + pr_debug("%s: 0-length read\n", __func__); + return 0; + } + + pr_debug("%s: got %i bytes\n", __func__, chunklen); + dbg_dump_hex(hp->inbuf_end, chunklen); + + hp->inbuf_end += chunklen; + + /* handle all completed packets */ + while ((packet < hp->inbuf_end) && got_packet(hp, packet)) { + struct hvsi_header *header = (struct hvsi_header *)packet; + + if (!is_header(packet)) { + printk(KERN_ERR "hvsi%i: got malformed packet\n", hp->index); + /* skip bytes until we find a header or run out of data */ + while ((packet < hp->inbuf_end) && (!is_header(packet))) + packet++; + continue; + } + + pr_debug("%s: handling %i-byte packet\n", __func__, + len_packet(packet)); + dbg_dump_packet(packet); + + switch (header->type) { + case VS_DATA_PACKET_HEADER: + if (!is_open(hp)) + break; + if (hp->tty == NULL) + break; /* no tty buffer to put data in */ + *flip = hvsi_recv_data(hp, packet); + break; + case VS_CONTROL_PACKET_HEADER: + hvsi_recv_control(hp, packet, hangup, handshake); + break; + case VS_QUERY_RESPONSE_PACKET_HEADER: + hvsi_recv_response(hp, packet); + break; + case VS_QUERY_PACKET_HEADER: + hvsi_recv_query(hp, packet); + break; + default: + printk(KERN_ERR "hvsi%i: unknown HVSI packet type 0x%x\n", + hp->index, header->type); + dump_packet(packet); + break; + } + + packet += len_packet(packet); + + if (*hangup || *handshake) { + pr_debug("%s: hangup or handshake\n", __func__); + /* + * we need to send the hangup now before receiving any more data. + * If we get "data, hangup, data", we can't deliver the second + * data before the hangup. + */ + break; + } + } + + compact_inbuf(hp, packet); + + return 1; +} + +static void hvsi_send_overflow(struct hvsi_struct *hp) +{ + pr_debug("%s: delivering %i bytes overflow\n", __func__, + hp->n_throttle); + + hvsi_insert_chars(hp, hp->throttle_buf, hp->n_throttle); + hp->n_throttle = 0; +} + +/* + * must get all pending data because we only get an irq on empty->non-empty + * transition + */ +static irqreturn_t hvsi_interrupt(int irq, void *arg) +{ + struct hvsi_struct *hp = (struct hvsi_struct *)arg; + struct tty_struct *flip; + struct tty_struct *hangup; + struct hvsi_struct *handshake; + unsigned long flags; + int again = 1; + + pr_debug("%s\n", __func__); + + while (again) { + spin_lock_irqsave(&hp->lock, flags); + again = hvsi_load_chunk(hp, &flip, &hangup, &handshake); + spin_unlock_irqrestore(&hp->lock, flags); + + /* + * we have to call tty_flip_buffer_push() and tty_hangup() outside our + * spinlock. But we also have to keep going until we've read all the + * available data. + */ + + if (flip) { + /* there was data put in the tty flip buffer */ + tty_flip_buffer_push(flip); + flip = NULL; + } + + if (hangup) { + tty_hangup(hangup); + } + + if (handshake) { + pr_debug("hvsi%i: attempting re-handshake\n", handshake->index); + schedule_work(&handshake->handshaker); + } + } + + spin_lock_irqsave(&hp->lock, flags); + if (hp->tty && hp->n_throttle + && (!test_bit(TTY_THROTTLED, &hp->tty->flags))) { + /* we weren't hung up and we weren't throttled, so we can deliver the + * rest now */ + flip = hp->tty; + hvsi_send_overflow(hp); + } + spin_unlock_irqrestore(&hp->lock, flags); + + if (flip) { + tty_flip_buffer_push(flip); + } + + return IRQ_HANDLED; +} + +/* for boot console, before the irq handler is running */ +static int __init poll_for_state(struct hvsi_struct *hp, int state) +{ + unsigned long end_jiffies = jiffies + HVSI_TIMEOUT; + + for (;;) { + hvsi_interrupt(hp->virq, (void *)hp); /* get pending data */ + + if (hp->state == state) + return 0; + + mdelay(5); + if (time_after(jiffies, end_jiffies)) + return -EIO; + } +} + +/* wait for irq handler to change our state */ +static int wait_for_state(struct hvsi_struct *hp, int state) +{ + int ret = 0; + + if (!wait_event_timeout(hp->stateq, (hp->state == state), HVSI_TIMEOUT)) + ret = -EIO; + + return ret; +} + +static int hvsi_query(struct hvsi_struct *hp, uint16_t verb) +{ + struct hvsi_query packet __ALIGNED__; + int wrote; + + packet.type = VS_QUERY_PACKET_HEADER; + packet.len = sizeof(struct hvsi_query); + packet.seqno = atomic_inc_return(&hp->seqno); + packet.verb = verb; + + pr_debug("%s: sending %i bytes\n", __func__, packet.len); + dbg_dump_hex((uint8_t*)&packet, packet.len); + + wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len); + if (wrote != packet.len) { + printk(KERN_ERR "hvsi%i: couldn't send query (%i)!\n", hp->index, + wrote); + return -EIO; + } + + return 0; +} + +static int hvsi_get_mctrl(struct hvsi_struct *hp) +{ + int ret; + + set_state(hp, HVSI_WAIT_FOR_MCTRL_RESPONSE); + hvsi_query(hp, VSV_SEND_MODEM_CTL_STATUS); + + ret = hvsi_wait(hp, HVSI_OPEN); + if (ret < 0) { + printk(KERN_ERR "hvsi%i: didn't get modem flags\n", hp->index); + set_state(hp, HVSI_OPEN); + return ret; + } + + pr_debug("%s: mctrl 0x%x\n", __func__, hp->mctrl); + + return 0; +} + +/* note that we can only set DTR */ +static int hvsi_set_mctrl(struct hvsi_struct *hp, uint16_t mctrl) +{ + struct hvsi_control packet __ALIGNED__; + int wrote; + + packet.type = VS_CONTROL_PACKET_HEADER, + packet.seqno = atomic_inc_return(&hp->seqno); + packet.len = sizeof(struct hvsi_control); + packet.verb = VSV_SET_MODEM_CTL; + packet.mask = HVSI_TSDTR; + + if (mctrl & TIOCM_DTR) + packet.word = HVSI_TSDTR; + + pr_debug("%s: sending %i bytes\n", __func__, packet.len); + dbg_dump_hex((uint8_t*)&packet, packet.len); + + wrote = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len); + if (wrote != packet.len) { + printk(KERN_ERR "hvsi%i: couldn't set DTR!\n", hp->index); + return -EIO; + } + + return 0; +} + +static void hvsi_drain_input(struct hvsi_struct *hp) +{ + uint8_t buf[HVSI_MAX_READ] __ALIGNED__; + unsigned long end_jiffies = jiffies + HVSI_TIMEOUT; + + while (time_before(end_jiffies, jiffies)) + if (0 == hvsi_read(hp, buf, HVSI_MAX_READ)) + break; +} + +static int hvsi_handshake(struct hvsi_struct *hp) +{ + int ret; + + /* + * We could have a CLOSE or other data waiting for us before we even try + * to open; try to throw it all away so we don't get confused. (CLOSE + * is the first message sent up the pipe when the FSP comes online. We + * need to distinguish between "it came up a while ago and we're the first + * user" and "it was just reset before it saw our handshake packet".) + */ + hvsi_drain_input(hp); + + set_state(hp, HVSI_WAIT_FOR_VER_RESPONSE); + ret = hvsi_query(hp, VSV_SEND_VERSION_NUMBER); + if (ret < 0) { + printk(KERN_ERR "hvsi%i: couldn't send version query\n", hp->index); + return ret; + } + + ret = hvsi_wait(hp, HVSI_OPEN); + if (ret < 0) + return ret; + + return 0; +} + +static void hvsi_handshaker(struct work_struct *work) +{ + struct hvsi_struct *hp = + container_of(work, struct hvsi_struct, handshaker); + + if (hvsi_handshake(hp) >= 0) + return; + + printk(KERN_ERR "hvsi%i: re-handshaking failed\n", hp->index); + if (is_console(hp)) { + /* + * ttys will re-attempt the handshake via hvsi_open, but + * the console will not. + */ + printk(KERN_ERR "hvsi%i: lost console!\n", hp->index); + } +} + +static int hvsi_put_chars(struct hvsi_struct *hp, const char *buf, int count) +{ + struct hvsi_data packet __ALIGNED__; + int ret; + + BUG_ON(count > HVSI_MAX_OUTGOING_DATA); + + packet.type = VS_DATA_PACKET_HEADER; + packet.seqno = atomic_inc_return(&hp->seqno); + packet.len = count + sizeof(struct hvsi_header); + memcpy(&packet.data, buf, count); + + ret = hvc_put_chars(hp->vtermno, (char *)&packet, packet.len); + if (ret == packet.len) { + /* return the number of chars written, not the packet length */ + return count; + } + return ret; /* return any errors */ +} + +static void hvsi_close_protocol(struct hvsi_struct *hp) +{ + struct hvsi_control packet __ALIGNED__; + + packet.type = VS_CONTROL_PACKET_HEADER; + packet.seqno = atomic_inc_return(&hp->seqno); + packet.len = 6; + packet.verb = VSV_CLOSE_PROTOCOL; + + pr_debug("%s: sending %i bytes\n", __func__, packet.len); + dbg_dump_hex((uint8_t*)&packet, packet.len); + + hvc_put_chars(hp->vtermno, (char *)&packet, packet.len); +} + +static int hvsi_open(struct tty_struct *tty, struct file *filp) +{ + struct hvsi_struct *hp; + unsigned long flags; + int line = tty->index; + int ret; + + pr_debug("%s\n", __func__); + + if (line < 0 || line >= hvsi_count) + return -ENODEV; + hp = &hvsi_ports[line]; + + tty->driver_data = hp; + + mb(); + if (hp->state == HVSI_FSP_DIED) + return -EIO; + + spin_lock_irqsave(&hp->lock, flags); + hp->tty = tty; + hp->count++; + atomic_set(&hp->seqno, 0); + h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE); + spin_unlock_irqrestore(&hp->lock, flags); + + if (is_console(hp)) + return 0; /* this has already been handshaked as the console */ + + ret = hvsi_handshake(hp); + if (ret < 0) { + printk(KERN_ERR "%s: HVSI handshaking failed\n", tty->name); + return ret; + } + + ret = hvsi_get_mctrl(hp); + if (ret < 0) { + printk(KERN_ERR "%s: couldn't get initial modem flags\n", tty->name); + return ret; + } + + ret = hvsi_set_mctrl(hp, hp->mctrl | TIOCM_DTR); + if (ret < 0) { + printk(KERN_ERR "%s: couldn't set DTR\n", tty->name); + return ret; + } + + return 0; +} + +/* wait for hvsi_write_worker to empty hp->outbuf */ +static void hvsi_flush_output(struct hvsi_struct *hp) +{ + wait_event_timeout(hp->emptyq, (hp->n_outbuf <= 0), HVSI_TIMEOUT); + + /* 'writer' could still be pending if it didn't see n_outbuf = 0 yet */ + cancel_delayed_work_sync(&hp->writer); + flush_work_sync(&hp->handshaker); + + /* + * it's also possible that our timeout expired and hvsi_write_worker + * didn't manage to push outbuf. poof. + */ + hp->n_outbuf = 0; +} + +static void hvsi_close(struct tty_struct *tty, struct file *filp) +{ + struct hvsi_struct *hp = tty->driver_data; + unsigned long flags; + + pr_debug("%s\n", __func__); + + if (tty_hung_up_p(filp)) + return; + + spin_lock_irqsave(&hp->lock, flags); + + if (--hp->count == 0) { + hp->tty = NULL; + hp->inbuf_end = hp->inbuf; /* discard remaining partial packets */ + + /* only close down connection if it is not the console */ + if (!is_console(hp)) { + h_vio_signal(hp->vtermno, VIO_IRQ_DISABLE); /* no more irqs */ + __set_state(hp, HVSI_CLOSED); + /* + * any data delivered to the tty layer after this will be + * discarded (except for XON/XOFF) + */ + tty->closing = 1; + + spin_unlock_irqrestore(&hp->lock, flags); + + /* let any existing irq handlers finish. no more will start. */ + synchronize_irq(hp->virq); + + /* hvsi_write_worker will re-schedule until outbuf is empty. */ + hvsi_flush_output(hp); + + /* tell FSP to stop sending data */ + hvsi_close_protocol(hp); + + /* + * drain anything FSP is still in the middle of sending, and let + * hvsi_handshake drain the rest on the next open. + */ + hvsi_drain_input(hp); + + spin_lock_irqsave(&hp->lock, flags); + } + } else if (hp->count < 0) + printk(KERN_ERR "hvsi_close %lu: oops, count is %d\n", + hp - hvsi_ports, hp->count); + + spin_unlock_irqrestore(&hp->lock, flags); +} + +static void hvsi_hangup(struct tty_struct *tty) +{ + struct hvsi_struct *hp = tty->driver_data; + unsigned long flags; + + pr_debug("%s\n", __func__); + + spin_lock_irqsave(&hp->lock, flags); + + hp->count = 0; + hp->n_outbuf = 0; + hp->tty = NULL; + + spin_unlock_irqrestore(&hp->lock, flags); +} + +/* called with hp->lock held */ +static void hvsi_push(struct hvsi_struct *hp) +{ + int n; + + if (hp->n_outbuf <= 0) + return; + + n = hvsi_put_chars(hp, hp->outbuf, hp->n_outbuf); + if (n > 0) { + /* success */ + pr_debug("%s: wrote %i chars\n", __func__, n); + hp->n_outbuf = 0; + } else if (n == -EIO) { + __set_state(hp, HVSI_FSP_DIED); + printk(KERN_ERR "hvsi%i: service processor died\n", hp->index); + } +} + +/* hvsi_write_worker will keep rescheduling itself until outbuf is empty */ +static void hvsi_write_worker(struct work_struct *work) +{ + struct hvsi_struct *hp = + container_of(work, struct hvsi_struct, writer.work); + unsigned long flags; +#ifdef DEBUG + static long start_j = 0; + + if (start_j == 0) + start_j = jiffies; +#endif /* DEBUG */ + + spin_lock_irqsave(&hp->lock, flags); + + pr_debug("%s: %i chars in buffer\n", __func__, hp->n_outbuf); + + if (!is_open(hp)) { + /* + * We could have a non-open connection if the service processor died + * while we were busily scheduling ourselves. In that case, it could + * be minutes before the service processor comes back, so only try + * again once a second. + */ + schedule_delayed_work(&hp->writer, HZ); + goto out; + } + + hvsi_push(hp); + if (hp->n_outbuf > 0) + schedule_delayed_work(&hp->writer, 10); + else { +#ifdef DEBUG + pr_debug("%s: outbuf emptied after %li jiffies\n", __func__, + jiffies - start_j); + start_j = 0; +#endif /* DEBUG */ + wake_up_all(&hp->emptyq); + tty_wakeup(hp->tty); + } + +out: + spin_unlock_irqrestore(&hp->lock, flags); +} + +static int hvsi_write_room(struct tty_struct *tty) +{ + struct hvsi_struct *hp = tty->driver_data; + + return N_OUTBUF - hp->n_outbuf; +} + +static int hvsi_chars_in_buffer(struct tty_struct *tty) +{ + struct hvsi_struct *hp = tty->driver_data; + + return hp->n_outbuf; +} + +static int hvsi_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct hvsi_struct *hp = tty->driver_data; + const char *source = buf; + unsigned long flags; + int total = 0; + int origcount = count; + + spin_lock_irqsave(&hp->lock, flags); + + pr_debug("%s: %i chars in buffer\n", __func__, hp->n_outbuf); + + if (!is_open(hp)) { + /* we're either closing or not yet open; don't accept data */ + pr_debug("%s: not open\n", __func__); + goto out; + } + + /* + * when the hypervisor buffer (16K) fills, data will stay in hp->outbuf + * and hvsi_write_worker will be scheduled. subsequent hvsi_write() calls + * will see there is no room in outbuf and return. + */ + while ((count > 0) && (hvsi_write_room(hp->tty) > 0)) { + int chunksize = min(count, hvsi_write_room(hp->tty)); + + BUG_ON(hp->n_outbuf < 0); + memcpy(hp->outbuf + hp->n_outbuf, source, chunksize); + hp->n_outbuf += chunksize; + + total += chunksize; + source += chunksize; + count -= chunksize; + hvsi_push(hp); + } + + if (hp->n_outbuf > 0) { + /* + * we weren't able to write it all to the hypervisor. + * schedule another push attempt. + */ + schedule_delayed_work(&hp->writer, 10); + } + +out: + spin_unlock_irqrestore(&hp->lock, flags); + + if (total != origcount) + pr_debug("%s: wanted %i, only wrote %i\n", __func__, origcount, + total); + + return total; +} + +/* + * I have never seen throttle or unthrottle called, so this little throttle + * buffering scheme may or may not work. + */ +static void hvsi_throttle(struct tty_struct *tty) +{ + struct hvsi_struct *hp = tty->driver_data; + + pr_debug("%s\n", __func__); + + h_vio_signal(hp->vtermno, VIO_IRQ_DISABLE); +} + +static void hvsi_unthrottle(struct tty_struct *tty) +{ + struct hvsi_struct *hp = tty->driver_data; + unsigned long flags; + int shouldflip = 0; + + pr_debug("%s\n", __func__); + + spin_lock_irqsave(&hp->lock, flags); + if (hp->n_throttle) { + hvsi_send_overflow(hp); + shouldflip = 1; + } + spin_unlock_irqrestore(&hp->lock, flags); + + if (shouldflip) + tty_flip_buffer_push(hp->tty); + + h_vio_signal(hp->vtermno, VIO_IRQ_ENABLE); +} + +static int hvsi_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct hvsi_struct *hp = tty->driver_data; + + hvsi_get_mctrl(hp); + return hp->mctrl; +} + +static int hvsi_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct hvsi_struct *hp = tty->driver_data; + unsigned long flags; + uint16_t new_mctrl; + + /* we can only alter DTR */ + clear &= TIOCM_DTR; + set &= TIOCM_DTR; + + spin_lock_irqsave(&hp->lock, flags); + + new_mctrl = (hp->mctrl & ~clear) | set; + + if (hp->mctrl != new_mctrl) { + hvsi_set_mctrl(hp, new_mctrl); + hp->mctrl = new_mctrl; + } + spin_unlock_irqrestore(&hp->lock, flags); + + return 0; +} + + +static const struct tty_operations hvsi_ops = { + .open = hvsi_open, + .close = hvsi_close, + .write = hvsi_write, + .hangup = hvsi_hangup, + .write_room = hvsi_write_room, + .chars_in_buffer = hvsi_chars_in_buffer, + .throttle = hvsi_throttle, + .unthrottle = hvsi_unthrottle, + .tiocmget = hvsi_tiocmget, + .tiocmset = hvsi_tiocmset, +}; + +static int __init hvsi_init(void) +{ + int i; + + hvsi_driver = alloc_tty_driver(hvsi_count); + if (!hvsi_driver) + return -ENOMEM; + + hvsi_driver->owner = THIS_MODULE; + hvsi_driver->driver_name = "hvsi"; + hvsi_driver->name = "hvsi"; + hvsi_driver->major = HVSI_MAJOR; + hvsi_driver->minor_start = HVSI_MINOR; + hvsi_driver->type = TTY_DRIVER_TYPE_SYSTEM; + hvsi_driver->init_termios = tty_std_termios; + hvsi_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL; + hvsi_driver->init_termios.c_ispeed = 9600; + hvsi_driver->init_termios.c_ospeed = 9600; + hvsi_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(hvsi_driver, &hvsi_ops); + + for (i=0; i < hvsi_count; i++) { + struct hvsi_struct *hp = &hvsi_ports[i]; + int ret = 1; + + ret = request_irq(hp->virq, hvsi_interrupt, IRQF_DISABLED, "hvsi", hp); + if (ret) + printk(KERN_ERR "HVSI: couldn't reserve irq 0x%x (error %i)\n", + hp->virq, ret); + } + hvsi_wait = wait_for_state; /* irqs active now */ + + if (tty_register_driver(hvsi_driver)) + panic("Couldn't register hvsi console driver\n"); + + printk(KERN_DEBUG "HVSI: registered %i devices\n", hvsi_count); + + return 0; +} +device_initcall(hvsi_init); + +/***** console (not tty) code: *****/ + +static void hvsi_console_print(struct console *console, const char *buf, + unsigned int count) +{ + struct hvsi_struct *hp = &hvsi_ports[console->index]; + char c[HVSI_MAX_OUTGOING_DATA] __ALIGNED__; + unsigned int i = 0, n = 0; + int ret, donecr = 0; + + mb(); + if (!is_open(hp)) + return; + + /* + * ugh, we have to translate LF -> CRLF ourselves, in place. + * copied from hvc_console.c: + */ + while (count > 0 || i > 0) { + if (count > 0 && i < sizeof(c)) { + if (buf[n] == '\n' && !donecr) { + c[i++] = '\r'; + donecr = 1; + } else { + c[i++] = buf[n++]; + donecr = 0; + --count; + } + } else { + ret = hvsi_put_chars(hp, c, i); + if (ret < 0) + i = 0; + i -= ret; + } + } +} + +static struct tty_driver *hvsi_console_device(struct console *console, + int *index) +{ + *index = console->index; + return hvsi_driver; +} + +static int __init hvsi_console_setup(struct console *console, char *options) +{ + struct hvsi_struct *hp; + int ret; + + if (console->index < 0 || console->index >= hvsi_count) + return -1; + hp = &hvsi_ports[console->index]; + + /* give the FSP a chance to change the baud rate when we re-open */ + hvsi_close_protocol(hp); + + ret = hvsi_handshake(hp); + if (ret < 0) + return ret; + + ret = hvsi_get_mctrl(hp); + if (ret < 0) + return ret; + + ret = hvsi_set_mctrl(hp, hp->mctrl | TIOCM_DTR); + if (ret < 0) + return ret; + + hp->flags |= HVSI_CONSOLE; + + return 0; +} + +static struct console hvsi_console = { + .name = "hvsi", + .write = hvsi_console_print, + .device = hvsi_console_device, + .setup = hvsi_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static int __init hvsi_console_init(void) +{ + struct device_node *vty; + + hvsi_wait = poll_for_state; /* no irqs yet; must poll */ + + /* search device tree for vty nodes */ + for (vty = of_find_compatible_node(NULL, "serial", "hvterm-protocol"); + vty != NULL; + vty = of_find_compatible_node(vty, "serial", "hvterm-protocol")) { + struct hvsi_struct *hp; + const uint32_t *vtermno, *irq; + + vtermno = of_get_property(vty, "reg", NULL); + irq = of_get_property(vty, "interrupts", NULL); + if (!vtermno || !irq) + continue; + + if (hvsi_count >= MAX_NR_HVSI_CONSOLES) { + of_node_put(vty); + break; + } + + hp = &hvsi_ports[hvsi_count]; + INIT_DELAYED_WORK(&hp->writer, hvsi_write_worker); + INIT_WORK(&hp->handshaker, hvsi_handshaker); + init_waitqueue_head(&hp->emptyq); + init_waitqueue_head(&hp->stateq); + spin_lock_init(&hp->lock); + hp->index = hvsi_count; + hp->inbuf_end = hp->inbuf; + hp->state = HVSI_CLOSED; + hp->vtermno = *vtermno; + hp->virq = irq_create_mapping(NULL, irq[0]); + if (hp->virq == NO_IRQ) { + printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n", + __func__, irq[0]); + continue; + } + + hvsi_count++; + } + + if (hvsi_count) + register_console(&hvsi_console); + return 0; +} +console_initcall(hvsi_console_init); diff --git a/drivers/tty/hvc/virtio_console.c b/drivers/tty/hvc/virtio_console.c new file mode 100644 index 000000000000..896a2ced1d27 --- /dev/null +++ b/drivers/tty/hvc/virtio_console.c @@ -0,0 +1,1838 @@ +/* + * Copyright (C) 2006, 2007, 2009 Rusty Russell, IBM Corporation + * Copyright (C) 2009, 2010 Red Hat, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "hvc_console.h" + +/* + * This is a global struct for storing common data for all the devices + * this driver handles. + * + * Mainly, it has a linked list for all the consoles in one place so + * that callbacks from hvc for get_chars(), put_chars() work properly + * across multiple devices and multiple ports per device. + */ +struct ports_driver_data { + /* Used for registering chardevs */ + struct class *class; + + /* Used for exporting per-port information to debugfs */ + struct dentry *debugfs_dir; + + /* List of all the devices we're handling */ + struct list_head portdevs; + + /* Number of devices this driver is handling */ + unsigned int index; + + /* + * This is used to keep track of the number of hvc consoles + * spawned by this driver. This number is given as the first + * argument to hvc_alloc(). To correctly map an initial + * console spawned via hvc_instantiate to the console being + * hooked up via hvc_alloc, we need to pass the same vtermno. + * + * We also just assume the first console being initialised was + * the first one that got used as the initial console. + */ + unsigned int next_vtermno; + + /* All the console devices handled by this driver */ + struct list_head consoles; +}; +static struct ports_driver_data pdrvdata; + +DEFINE_SPINLOCK(pdrvdata_lock); + +/* This struct holds information that's relevant only for console ports */ +struct console { + /* We'll place all consoles in a list in the pdrvdata struct */ + struct list_head list; + + /* The hvc device associated with this console port */ + struct hvc_struct *hvc; + + /* The size of the console */ + struct winsize ws; + + /* + * This number identifies the number that we used to register + * with hvc in hvc_instantiate() and hvc_alloc(); this is the + * number passed on by the hvc callbacks to us to + * differentiate between the other console ports handled by + * this driver + */ + u32 vtermno; +}; + +struct port_buffer { + char *buf; + + /* size of the buffer in *buf above */ + size_t size; + + /* used length of the buffer */ + size_t len; + /* offset in the buf from which to consume data */ + size_t offset; +}; + +/* + * This is a per-device struct that stores data common to all the + * ports for that device (vdev->priv). + */ +struct ports_device { + /* Next portdev in the list, head is in the pdrvdata struct */ + struct list_head list; + + /* + * Workqueue handlers where we process deferred work after + * notification + */ + struct work_struct control_work; + + struct list_head ports; + + /* To protect the list of ports */ + spinlock_t ports_lock; + + /* To protect the vq operations for the control channel */ + spinlock_t cvq_lock; + + /* The current config space is stored here */ + struct virtio_console_config config; + + /* The virtio device we're associated with */ + struct virtio_device *vdev; + + /* + * A couple of virtqueues for the control channel: one for + * guest->host transfers, one for host->guest transfers + */ + struct virtqueue *c_ivq, *c_ovq; + + /* Array of per-port IO virtqueues */ + struct virtqueue **in_vqs, **out_vqs; + + /* Used for numbering devices for sysfs and debugfs */ + unsigned int drv_index; + + /* Major number for this device. Ports will be created as minors. */ + int chr_major; +}; + +/* This struct holds the per-port data */ +struct port { + /* Next port in the list, head is in the ports_device */ + struct list_head list; + + /* Pointer to the parent virtio_console device */ + struct ports_device *portdev; + + /* The current buffer from which data has to be fed to readers */ + struct port_buffer *inbuf; + + /* + * To protect the operations on the in_vq associated with this + * port. Has to be a spinlock because it can be called from + * interrupt context (get_char()). + */ + spinlock_t inbuf_lock; + + /* Protect the operations on the out_vq. */ + spinlock_t outvq_lock; + + /* The IO vqs for this port */ + struct virtqueue *in_vq, *out_vq; + + /* File in the debugfs directory that exposes this port's information */ + struct dentry *debugfs_file; + + /* + * The entries in this struct will be valid if this port is + * hooked up to an hvc console + */ + struct console cons; + + /* Each port associates with a separate char device */ + struct cdev *cdev; + struct device *dev; + + /* Reference-counting to handle port hot-unplugs and file operations */ + struct kref kref; + + /* A waitqueue for poll() or blocking read operations */ + wait_queue_head_t waitqueue; + + /* The 'name' of the port that we expose via sysfs properties */ + char *name; + + /* We can notify apps of host connect / disconnect events via SIGIO */ + struct fasync_struct *async_queue; + + /* The 'id' to identify the port with the Host */ + u32 id; + + bool outvq_full; + + /* Is the host device open */ + bool host_connected; + + /* We should allow only one process to open a port */ + bool guest_connected; +}; + +/* This is the very early arch-specified put chars function. */ +static int (*early_put_chars)(u32, const char *, int); + +static struct port *find_port_by_vtermno(u32 vtermno) +{ + struct port *port; + struct console *cons; + unsigned long flags; + + spin_lock_irqsave(&pdrvdata_lock, flags); + list_for_each_entry(cons, &pdrvdata.consoles, list) { + if (cons->vtermno == vtermno) { + port = container_of(cons, struct port, cons); + goto out; + } + } + port = NULL; +out: + spin_unlock_irqrestore(&pdrvdata_lock, flags); + return port; +} + +static struct port *find_port_by_devt_in_portdev(struct ports_device *portdev, + dev_t dev) +{ + struct port *port; + unsigned long flags; + + spin_lock_irqsave(&portdev->ports_lock, flags); + list_for_each_entry(port, &portdev->ports, list) + if (port->cdev->dev == dev) + goto out; + port = NULL; +out: + spin_unlock_irqrestore(&portdev->ports_lock, flags); + + return port; +} + +static struct port *find_port_by_devt(dev_t dev) +{ + struct ports_device *portdev; + struct port *port; + unsigned long flags; + + spin_lock_irqsave(&pdrvdata_lock, flags); + list_for_each_entry(portdev, &pdrvdata.portdevs, list) { + port = find_port_by_devt_in_portdev(portdev, dev); + if (port) + goto out; + } + port = NULL; +out: + spin_unlock_irqrestore(&pdrvdata_lock, flags); + return port; +} + +static struct port *find_port_by_id(struct ports_device *portdev, u32 id) +{ + struct port *port; + unsigned long flags; + + spin_lock_irqsave(&portdev->ports_lock, flags); + list_for_each_entry(port, &portdev->ports, list) + if (port->id == id) + goto out; + port = NULL; +out: + spin_unlock_irqrestore(&portdev->ports_lock, flags); + + return port; +} + +static struct port *find_port_by_vq(struct ports_device *portdev, + struct virtqueue *vq) +{ + struct port *port; + unsigned long flags; + + spin_lock_irqsave(&portdev->ports_lock, flags); + list_for_each_entry(port, &portdev->ports, list) + if (port->in_vq == vq || port->out_vq == vq) + goto out; + port = NULL; +out: + spin_unlock_irqrestore(&portdev->ports_lock, flags); + return port; +} + +static bool is_console_port(struct port *port) +{ + if (port->cons.hvc) + return true; + return false; +} + +static inline bool use_multiport(struct ports_device *portdev) +{ + /* + * This condition can be true when put_chars is called from + * early_init + */ + if (!portdev->vdev) + return 0; + return portdev->vdev->features[0] & (1 << VIRTIO_CONSOLE_F_MULTIPORT); +} + +static void free_buf(struct port_buffer *buf) +{ + kfree(buf->buf); + kfree(buf); +} + +static struct port_buffer *alloc_buf(size_t buf_size) +{ + struct port_buffer *buf; + + buf = kmalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + goto fail; + buf->buf = kzalloc(buf_size, GFP_KERNEL); + if (!buf->buf) + goto free_buf; + buf->len = 0; + buf->offset = 0; + buf->size = buf_size; + return buf; + +free_buf: + kfree(buf); +fail: + return NULL; +} + +/* Callers should take appropriate locks */ +static void *get_inbuf(struct port *port) +{ + struct port_buffer *buf; + struct virtqueue *vq; + unsigned int len; + + vq = port->in_vq; + buf = virtqueue_get_buf(vq, &len); + if (buf) { + buf->len = len; + buf->offset = 0; + } + return buf; +} + +/* + * Create a scatter-gather list representing our input buffer and put + * it in the queue. + * + * Callers should take appropriate locks. + */ +static int add_inbuf(struct virtqueue *vq, struct port_buffer *buf) +{ + struct scatterlist sg[1]; + int ret; + + sg_init_one(sg, buf->buf, buf->size); + + ret = virtqueue_add_buf(vq, sg, 0, 1, buf); + virtqueue_kick(vq); + return ret; +} + +/* Discard any unread data this port has. Callers lockers. */ +static void discard_port_data(struct port *port) +{ + struct port_buffer *buf; + struct virtqueue *vq; + unsigned int len; + int ret; + + vq = port->in_vq; + if (port->inbuf) + buf = port->inbuf; + else + buf = virtqueue_get_buf(vq, &len); + + ret = 0; + while (buf) { + if (add_inbuf(vq, buf) < 0) { + ret++; + free_buf(buf); + } + buf = virtqueue_get_buf(vq, &len); + } + port->inbuf = NULL; + if (ret) + dev_warn(port->dev, "Errors adding %d buffers back to vq\n", + ret); +} + +static bool port_has_data(struct port *port) +{ + unsigned long flags; + bool ret; + + spin_lock_irqsave(&port->inbuf_lock, flags); + if (port->inbuf) { + ret = true; + goto out; + } + port->inbuf = get_inbuf(port); + if (port->inbuf) { + ret = true; + goto out; + } + ret = false; +out: + spin_unlock_irqrestore(&port->inbuf_lock, flags); + return ret; +} + +static ssize_t __send_control_msg(struct ports_device *portdev, u32 port_id, + unsigned int event, unsigned int value) +{ + struct scatterlist sg[1]; + struct virtio_console_control cpkt; + struct virtqueue *vq; + unsigned int len; + + if (!use_multiport(portdev)) + return 0; + + cpkt.id = port_id; + cpkt.event = event; + cpkt.value = value; + + vq = portdev->c_ovq; + + sg_init_one(sg, &cpkt, sizeof(cpkt)); + if (virtqueue_add_buf(vq, sg, 1, 0, &cpkt) >= 0) { + virtqueue_kick(vq); + while (!virtqueue_get_buf(vq, &len)) + cpu_relax(); + } + return 0; +} + +static ssize_t send_control_msg(struct port *port, unsigned int event, + unsigned int value) +{ + /* Did the port get unplugged before userspace closed it? */ + if (port->portdev) + return __send_control_msg(port->portdev, port->id, event, value); + return 0; +} + +/* Callers must take the port->outvq_lock */ +static void reclaim_consumed_buffers(struct port *port) +{ + void *buf; + unsigned int len; + + while ((buf = virtqueue_get_buf(port->out_vq, &len))) { + kfree(buf); + port->outvq_full = false; + } +} + +static ssize_t send_buf(struct port *port, void *in_buf, size_t in_count, + bool nonblock) +{ + struct scatterlist sg[1]; + struct virtqueue *out_vq; + ssize_t ret; + unsigned long flags; + unsigned int len; + + out_vq = port->out_vq; + + spin_lock_irqsave(&port->outvq_lock, flags); + + reclaim_consumed_buffers(port); + + sg_init_one(sg, in_buf, in_count); + ret = virtqueue_add_buf(out_vq, sg, 1, 0, in_buf); + + /* Tell Host to go! */ + virtqueue_kick(out_vq); + + if (ret < 0) { + in_count = 0; + goto done; + } + + if (ret == 0) + port->outvq_full = true; + + if (nonblock) + goto done; + + /* + * Wait till the host acknowledges it pushed out the data we + * sent. This is done for data from the hvc_console; the tty + * operations are performed with spinlocks held so we can't + * sleep here. An alternative would be to copy the data to a + * buffer and relax the spinning requirement. The downside is + * we need to kmalloc a GFP_ATOMIC buffer each time the + * console driver writes something out. + */ + while (!virtqueue_get_buf(out_vq, &len)) + cpu_relax(); +done: + spin_unlock_irqrestore(&port->outvq_lock, flags); + /* + * We're expected to return the amount of data we wrote -- all + * of it + */ + return in_count; +} + +/* + * Give out the data that's requested from the buffer that we have + * queued up. + */ +static ssize_t fill_readbuf(struct port *port, char *out_buf, size_t out_count, + bool to_user) +{ + struct port_buffer *buf; + unsigned long flags; + + if (!out_count || !port_has_data(port)) + return 0; + + buf = port->inbuf; + out_count = min(out_count, buf->len - buf->offset); + + if (to_user) { + ssize_t ret; + + ret = copy_to_user(out_buf, buf->buf + buf->offset, out_count); + if (ret) + return -EFAULT; + } else { + memcpy(out_buf, buf->buf + buf->offset, out_count); + } + + buf->offset += out_count; + + if (buf->offset == buf->len) { + /* + * We're done using all the data in this buffer. + * Re-queue so that the Host can send us more data. + */ + spin_lock_irqsave(&port->inbuf_lock, flags); + port->inbuf = NULL; + + if (add_inbuf(port->in_vq, buf) < 0) + dev_warn(port->dev, "failed add_buf\n"); + + spin_unlock_irqrestore(&port->inbuf_lock, flags); + } + /* Return the number of bytes actually copied */ + return out_count; +} + +/* The condition that must be true for polling to end */ +static bool will_read_block(struct port *port) +{ + if (!port->guest_connected) { + /* Port got hot-unplugged. Let's exit. */ + return false; + } + return !port_has_data(port) && port->host_connected; +} + +static bool will_write_block(struct port *port) +{ + bool ret; + + if (!port->guest_connected) { + /* Port got hot-unplugged. Let's exit. */ + return false; + } + if (!port->host_connected) + return true; + + spin_lock_irq(&port->outvq_lock); + /* + * Check if the Host has consumed any buffers since we last + * sent data (this is only applicable for nonblocking ports). + */ + reclaim_consumed_buffers(port); + ret = port->outvq_full; + spin_unlock_irq(&port->outvq_lock); + + return ret; +} + +static ssize_t port_fops_read(struct file *filp, char __user *ubuf, + size_t count, loff_t *offp) +{ + struct port *port; + ssize_t ret; + + port = filp->private_data; + + if (!port_has_data(port)) { + /* + * If nothing's connected on the host just return 0 in + * case of list_empty; this tells the userspace app + * that there's no connection + */ + if (!port->host_connected) + return 0; + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + + ret = wait_event_interruptible(port->waitqueue, + !will_read_block(port)); + if (ret < 0) + return ret; + } + /* Port got hot-unplugged. */ + if (!port->guest_connected) + return -ENODEV; + /* + * We could've received a disconnection message while we were + * waiting for more data. + * + * This check is not clubbed in the if() statement above as we + * might receive some data as well as the host could get + * disconnected after we got woken up from our wait. So we + * really want to give off whatever data we have and only then + * check for host_connected. + */ + if (!port_has_data(port) && !port->host_connected) + return 0; + + return fill_readbuf(port, ubuf, count, true); +} + +static ssize_t port_fops_write(struct file *filp, const char __user *ubuf, + size_t count, loff_t *offp) +{ + struct port *port; + char *buf; + ssize_t ret; + bool nonblock; + + /* Userspace could be out to fool us */ + if (!count) + return 0; + + port = filp->private_data; + + nonblock = filp->f_flags & O_NONBLOCK; + + if (will_write_block(port)) { + if (nonblock) + return -EAGAIN; + + ret = wait_event_interruptible(port->waitqueue, + !will_write_block(port)); + if (ret < 0) + return ret; + } + /* Port got hot-unplugged. */ + if (!port->guest_connected) + return -ENODEV; + + count = min((size_t)(32 * 1024), count); + + buf = kmalloc(count, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = copy_from_user(buf, ubuf, count); + if (ret) { + ret = -EFAULT; + goto free_buf; + } + + /* + * We now ask send_buf() to not spin for generic ports -- we + * can re-use the same code path that non-blocking file + * descriptors take for blocking file descriptors since the + * wait is already done and we're certain the write will go + * through to the host. + */ + nonblock = true; + ret = send_buf(port, buf, count, nonblock); + + if (nonblock && ret > 0) + goto out; + +free_buf: + kfree(buf); +out: + return ret; +} + +static unsigned int port_fops_poll(struct file *filp, poll_table *wait) +{ + struct port *port; + unsigned int ret; + + port = filp->private_data; + poll_wait(filp, &port->waitqueue, wait); + + if (!port->guest_connected) { + /* Port got unplugged */ + return POLLHUP; + } + ret = 0; + if (!will_read_block(port)) + ret |= POLLIN | POLLRDNORM; + if (!will_write_block(port)) + ret |= POLLOUT; + if (!port->host_connected) + ret |= POLLHUP; + + return ret; +} + +static void remove_port(struct kref *kref); + +static int port_fops_release(struct inode *inode, struct file *filp) +{ + struct port *port; + + port = filp->private_data; + + /* Notify host of port being closed */ + send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0); + + spin_lock_irq(&port->inbuf_lock); + port->guest_connected = false; + + discard_port_data(port); + + spin_unlock_irq(&port->inbuf_lock); + + spin_lock_irq(&port->outvq_lock); + reclaim_consumed_buffers(port); + spin_unlock_irq(&port->outvq_lock); + + /* + * Locks aren't necessary here as a port can't be opened after + * unplug, and if a port isn't unplugged, a kref would already + * exist for the port. Plus, taking ports_lock here would + * create a dependency on other locks taken by functions + * inside remove_port if we're the last holder of the port, + * creating many problems. + */ + kref_put(&port->kref, remove_port); + + return 0; +} + +static int port_fops_open(struct inode *inode, struct file *filp) +{ + struct cdev *cdev = inode->i_cdev; + struct port *port; + int ret; + + port = find_port_by_devt(cdev->dev); + filp->private_data = port; + + /* Prevent against a port getting hot-unplugged at the same time */ + spin_lock_irq(&port->portdev->ports_lock); + kref_get(&port->kref); + spin_unlock_irq(&port->portdev->ports_lock); + + /* + * Don't allow opening of console port devices -- that's done + * via /dev/hvc + */ + if (is_console_port(port)) { + ret = -ENXIO; + goto out; + } + + /* Allow only one process to open a particular port at a time */ + spin_lock_irq(&port->inbuf_lock); + if (port->guest_connected) { + spin_unlock_irq(&port->inbuf_lock); + ret = -EMFILE; + goto out; + } + + port->guest_connected = true; + spin_unlock_irq(&port->inbuf_lock); + + spin_lock_irq(&port->outvq_lock); + /* + * There might be a chance that we missed reclaiming a few + * buffers in the window of the port getting previously closed + * and opening now. + */ + reclaim_consumed_buffers(port); + spin_unlock_irq(&port->outvq_lock); + + nonseekable_open(inode, filp); + + /* Notify host of port being opened */ + send_control_msg(filp->private_data, VIRTIO_CONSOLE_PORT_OPEN, 1); + + return 0; +out: + kref_put(&port->kref, remove_port); + return ret; +} + +static int port_fops_fasync(int fd, struct file *filp, int mode) +{ + struct port *port; + + port = filp->private_data; + return fasync_helper(fd, filp, mode, &port->async_queue); +} + +/* + * The file operations that we support: programs in the guest can open + * a console device, read from it, write to it, poll for data and + * close it. The devices are at + * /dev/vportp + */ +static const struct file_operations port_fops = { + .owner = THIS_MODULE, + .open = port_fops_open, + .read = port_fops_read, + .write = port_fops_write, + .poll = port_fops_poll, + .release = port_fops_release, + .fasync = port_fops_fasync, + .llseek = no_llseek, +}; + +/* + * The put_chars() callback is pretty straightforward. + * + * We turn the characters into a scatter-gather list, add it to the + * output queue and then kick the Host. Then we sit here waiting for + * it to finish: inefficient in theory, but in practice + * implementations will do it immediately (lguest's Launcher does). + */ +static int put_chars(u32 vtermno, const char *buf, int count) +{ + struct port *port; + + if (unlikely(early_put_chars)) + return early_put_chars(vtermno, buf, count); + + port = find_port_by_vtermno(vtermno); + if (!port) + return -EPIPE; + + return send_buf(port, (void *)buf, count, false); +} + +/* + * get_chars() is the callback from the hvc_console infrastructure + * when an interrupt is received. + * + * We call out to fill_readbuf that gets us the required data from the + * buffers that are queued up. + */ +static int get_chars(u32 vtermno, char *buf, int count) +{ + struct port *port; + + /* If we've not set up the port yet, we have no input to give. */ + if (unlikely(early_put_chars)) + return 0; + + port = find_port_by_vtermno(vtermno); + if (!port) + return -EPIPE; + + /* If we don't have an input queue yet, we can't get input. */ + BUG_ON(!port->in_vq); + + return fill_readbuf(port, buf, count, false); +} + +static void resize_console(struct port *port) +{ + struct virtio_device *vdev; + + /* The port could have been hot-unplugged */ + if (!port || !is_console_port(port)) + return; + + vdev = port->portdev->vdev; + if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_SIZE)) + hvc_resize(port->cons.hvc, port->cons.ws); +} + +/* We set the configuration at this point, since we now have a tty */ +static int notifier_add_vio(struct hvc_struct *hp, int data) +{ + struct port *port; + + port = find_port_by_vtermno(hp->vtermno); + if (!port) + return -EINVAL; + + hp->irq_requested = 1; + resize_console(port); + + return 0; +} + +static void notifier_del_vio(struct hvc_struct *hp, int data) +{ + hp->irq_requested = 0; +} + +/* The operations for console ports. */ +static const struct hv_ops hv_ops = { + .get_chars = get_chars, + .put_chars = put_chars, + .notifier_add = notifier_add_vio, + .notifier_del = notifier_del_vio, + .notifier_hangup = notifier_del_vio, +}; + +/* + * Console drivers are initialized very early so boot messages can go + * out, so we do things slightly differently from the generic virtio + * initialization of the net and block drivers. + * + * At this stage, the console is output-only. It's too early to set + * up a virtqueue, so we let the drivers do some boutique early-output + * thing. + */ +int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int)) +{ + early_put_chars = put_chars; + return hvc_instantiate(0, 0, &hv_ops); +} + +int init_port_console(struct port *port) +{ + int ret; + + /* + * The Host's telling us this port is a console port. Hook it + * up with an hvc console. + * + * To set up and manage our virtual console, we call + * hvc_alloc(). + * + * The first argument of hvc_alloc() is the virtual console + * number. The second argument is the parameter for the + * notification mechanism (like irq number). We currently + * leave this as zero, virtqueues have implicit notifications. + * + * The third argument is a "struct hv_ops" containing the + * put_chars() get_chars(), notifier_add() and notifier_del() + * pointers. The final argument is the output buffer size: we + * can do any size, so we put PAGE_SIZE here. + */ + port->cons.vtermno = pdrvdata.next_vtermno; + + port->cons.hvc = hvc_alloc(port->cons.vtermno, 0, &hv_ops, PAGE_SIZE); + if (IS_ERR(port->cons.hvc)) { + ret = PTR_ERR(port->cons.hvc); + dev_err(port->dev, + "error %d allocating hvc for port\n", ret); + port->cons.hvc = NULL; + return ret; + } + spin_lock_irq(&pdrvdata_lock); + pdrvdata.next_vtermno++; + list_add_tail(&port->cons.list, &pdrvdata.consoles); + spin_unlock_irq(&pdrvdata_lock); + port->guest_connected = true; + + /* + * Start using the new console output if this is the first + * console to come up. + */ + if (early_put_chars) + early_put_chars = NULL; + + /* Notify host of port being opened */ + send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 1); + + return 0; +} + +static ssize_t show_port_name(struct device *dev, + struct device_attribute *attr, char *buffer) +{ + struct port *port; + + port = dev_get_drvdata(dev); + + return sprintf(buffer, "%s\n", port->name); +} + +static DEVICE_ATTR(name, S_IRUGO, show_port_name, NULL); + +static struct attribute *port_sysfs_entries[] = { + &dev_attr_name.attr, + NULL +}; + +static struct attribute_group port_attribute_group = { + .name = NULL, /* put in device directory */ + .attrs = port_sysfs_entries, +}; + +static int debugfs_open(struct inode *inode, struct file *filp) +{ + filp->private_data = inode->i_private; + return 0; +} + +static ssize_t debugfs_read(struct file *filp, char __user *ubuf, + size_t count, loff_t *offp) +{ + struct port *port; + char *buf; + ssize_t ret, out_offset, out_count; + + out_count = 1024; + buf = kmalloc(out_count, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + port = filp->private_data; + out_offset = 0; + out_offset += snprintf(buf + out_offset, out_count, + "name: %s\n", port->name ? port->name : ""); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "guest_connected: %d\n", port->guest_connected); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "host_connected: %d\n", port->host_connected); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "outvq_full: %d\n", port->outvq_full); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "is_console: %s\n", + is_console_port(port) ? "yes" : "no"); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "console_vtermno: %u\n", port->cons.vtermno); + + ret = simple_read_from_buffer(ubuf, count, offp, buf, out_offset); + kfree(buf); + return ret; +} + +static const struct file_operations port_debugfs_ops = { + .owner = THIS_MODULE, + .open = debugfs_open, + .read = debugfs_read, +}; + +static void set_console_size(struct port *port, u16 rows, u16 cols) +{ + if (!port || !is_console_port(port)) + return; + + port->cons.ws.ws_row = rows; + port->cons.ws.ws_col = cols; +} + +static unsigned int fill_queue(struct virtqueue *vq, spinlock_t *lock) +{ + struct port_buffer *buf; + unsigned int nr_added_bufs; + int ret; + + nr_added_bufs = 0; + do { + buf = alloc_buf(PAGE_SIZE); + if (!buf) + break; + + spin_lock_irq(lock); + ret = add_inbuf(vq, buf); + if (ret < 0) { + spin_unlock_irq(lock); + free_buf(buf); + break; + } + nr_added_bufs++; + spin_unlock_irq(lock); + } while (ret > 0); + + return nr_added_bufs; +} + +static void send_sigio_to_port(struct port *port) +{ + if (port->async_queue && port->guest_connected) + kill_fasync(&port->async_queue, SIGIO, POLL_OUT); +} + +static int add_port(struct ports_device *portdev, u32 id) +{ + char debugfs_name[16]; + struct port *port; + struct port_buffer *buf; + dev_t devt; + unsigned int nr_added_bufs; + int err; + + port = kmalloc(sizeof(*port), GFP_KERNEL); + if (!port) { + err = -ENOMEM; + goto fail; + } + kref_init(&port->kref); + + port->portdev = portdev; + port->id = id; + + port->name = NULL; + port->inbuf = NULL; + port->cons.hvc = NULL; + port->async_queue = NULL; + + port->cons.ws.ws_row = port->cons.ws.ws_col = 0; + + port->host_connected = port->guest_connected = false; + + port->outvq_full = false; + + port->in_vq = portdev->in_vqs[port->id]; + port->out_vq = portdev->out_vqs[port->id]; + + port->cdev = cdev_alloc(); + if (!port->cdev) { + dev_err(&port->portdev->vdev->dev, "Error allocating cdev\n"); + err = -ENOMEM; + goto free_port; + } + port->cdev->ops = &port_fops; + + devt = MKDEV(portdev->chr_major, id); + err = cdev_add(port->cdev, devt, 1); + if (err < 0) { + dev_err(&port->portdev->vdev->dev, + "Error %d adding cdev for port %u\n", err, id); + goto free_cdev; + } + port->dev = device_create(pdrvdata.class, &port->portdev->vdev->dev, + devt, port, "vport%up%u", + port->portdev->drv_index, id); + if (IS_ERR(port->dev)) { + err = PTR_ERR(port->dev); + dev_err(&port->portdev->vdev->dev, + "Error %d creating device for port %u\n", + err, id); + goto free_cdev; + } + + spin_lock_init(&port->inbuf_lock); + spin_lock_init(&port->outvq_lock); + init_waitqueue_head(&port->waitqueue); + + /* Fill the in_vq with buffers so the host can send us data. */ + nr_added_bufs = fill_queue(port->in_vq, &port->inbuf_lock); + if (!nr_added_bufs) { + dev_err(port->dev, "Error allocating inbufs\n"); + err = -ENOMEM; + goto free_device; + } + + /* + * If we're not using multiport support, this has to be a console port + */ + if (!use_multiport(port->portdev)) { + err = init_port_console(port); + if (err) + goto free_inbufs; + } + + spin_lock_irq(&portdev->ports_lock); + list_add_tail(&port->list, &port->portdev->ports); + spin_unlock_irq(&portdev->ports_lock); + + /* + * Tell the Host we're set so that it can send us various + * configuration parameters for this port (eg, port name, + * caching, whether this is a console port, etc.) + */ + send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1); + + if (pdrvdata.debugfs_dir) { + /* + * Finally, create the debugfs file that we can use to + * inspect a port's state at any time + */ + sprintf(debugfs_name, "vport%up%u", + port->portdev->drv_index, id); + port->debugfs_file = debugfs_create_file(debugfs_name, 0444, + pdrvdata.debugfs_dir, + port, + &port_debugfs_ops); + } + return 0; + +free_inbufs: + while ((buf = virtqueue_detach_unused_buf(port->in_vq))) + free_buf(buf); +free_device: + device_destroy(pdrvdata.class, port->dev->devt); +free_cdev: + cdev_del(port->cdev); +free_port: + kfree(port); +fail: + /* The host might want to notify management sw about port add failure */ + __send_control_msg(portdev, id, VIRTIO_CONSOLE_PORT_READY, 0); + return err; +} + +/* No users remain, remove all port-specific data. */ +static void remove_port(struct kref *kref) +{ + struct port *port; + + port = container_of(kref, struct port, kref); + + sysfs_remove_group(&port->dev->kobj, &port_attribute_group); + device_destroy(pdrvdata.class, port->dev->devt); + cdev_del(port->cdev); + + kfree(port->name); + + debugfs_remove(port->debugfs_file); + + kfree(port); +} + +/* + * Port got unplugged. Remove port from portdev's list and drop the + * kref reference. If no userspace has this port opened, it will + * result in immediate removal the port. + */ +static void unplug_port(struct port *port) +{ + struct port_buffer *buf; + + spin_lock_irq(&port->portdev->ports_lock); + list_del(&port->list); + spin_unlock_irq(&port->portdev->ports_lock); + + if (port->guest_connected) { + port->guest_connected = false; + port->host_connected = false; + wake_up_interruptible(&port->waitqueue); + + /* Let the app know the port is going down. */ + send_sigio_to_port(port); + } + + if (is_console_port(port)) { + spin_lock_irq(&pdrvdata_lock); + list_del(&port->cons.list); + spin_unlock_irq(&pdrvdata_lock); +#if 0 + /* + * hvc_remove() not called as removing one hvc port + * results in other hvc ports getting frozen. + * + * Once this is resolved in hvc, this functionality + * will be enabled. Till that is done, the -EPIPE + * return from get_chars() above will help + * hvc_console.c to clean up on ports we remove here. + */ + hvc_remove(port->cons.hvc); +#endif + } + + /* Remove unused data this port might have received. */ + discard_port_data(port); + + reclaim_consumed_buffers(port); + + /* Remove buffers we queued up for the Host to send us data in. */ + while ((buf = virtqueue_detach_unused_buf(port->in_vq))) + free_buf(buf); + + /* + * We should just assume the device itself has gone off -- + * else a close on an open port later will try to send out a + * control message. + */ + port->portdev = NULL; + + /* + * Locks around here are not necessary - a port can't be + * opened after we removed the port struct from ports_list + * above. + */ + kref_put(&port->kref, remove_port); +} + +/* Any private messages that the Host and Guest want to share */ +static void handle_control_message(struct ports_device *portdev, + struct port_buffer *buf) +{ + struct virtio_console_control *cpkt; + struct port *port; + size_t name_size; + int err; + + cpkt = (struct virtio_console_control *)(buf->buf + buf->offset); + + port = find_port_by_id(portdev, cpkt->id); + if (!port && cpkt->event != VIRTIO_CONSOLE_PORT_ADD) { + /* No valid header at start of buffer. Drop it. */ + dev_dbg(&portdev->vdev->dev, + "Invalid index %u in control packet\n", cpkt->id); + return; + } + + switch (cpkt->event) { + case VIRTIO_CONSOLE_PORT_ADD: + if (port) { + dev_dbg(&portdev->vdev->dev, + "Port %u already added\n", port->id); + send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1); + break; + } + if (cpkt->id >= portdev->config.max_nr_ports) { + dev_warn(&portdev->vdev->dev, + "Request for adding port with out-of-bound id %u, max. supported id: %u\n", + cpkt->id, portdev->config.max_nr_ports - 1); + break; + } + add_port(portdev, cpkt->id); + break; + case VIRTIO_CONSOLE_PORT_REMOVE: + unplug_port(port); + break; + case VIRTIO_CONSOLE_CONSOLE_PORT: + if (!cpkt->value) + break; + if (is_console_port(port)) + break; + + init_port_console(port); + /* + * Could remove the port here in case init fails - but + * have to notify the host first. + */ + break; + case VIRTIO_CONSOLE_RESIZE: { + struct { + __u16 rows; + __u16 cols; + } size; + + if (!is_console_port(port)) + break; + + memcpy(&size, buf->buf + buf->offset + sizeof(*cpkt), + sizeof(size)); + set_console_size(port, size.rows, size.cols); + + port->cons.hvc->irq_requested = 1; + resize_console(port); + break; + } + case VIRTIO_CONSOLE_PORT_OPEN: + port->host_connected = cpkt->value; + wake_up_interruptible(&port->waitqueue); + /* + * If the host port got closed and the host had any + * unconsumed buffers, we'll be able to reclaim them + * now. + */ + spin_lock_irq(&port->outvq_lock); + reclaim_consumed_buffers(port); + spin_unlock_irq(&port->outvq_lock); + + /* + * If the guest is connected, it'll be interested in + * knowing the host connection state changed. + */ + send_sigio_to_port(port); + break; + case VIRTIO_CONSOLE_PORT_NAME: + /* + * Skip the size of the header and the cpkt to get the size + * of the name that was sent + */ + name_size = buf->len - buf->offset - sizeof(*cpkt) + 1; + + port->name = kmalloc(name_size, GFP_KERNEL); + if (!port->name) { + dev_err(port->dev, + "Not enough space to store port name\n"); + break; + } + strncpy(port->name, buf->buf + buf->offset + sizeof(*cpkt), + name_size - 1); + port->name[name_size - 1] = 0; + + /* + * Since we only have one sysfs attribute, 'name', + * create it only if we have a name for the port. + */ + err = sysfs_create_group(&port->dev->kobj, + &port_attribute_group); + if (err) { + dev_err(port->dev, + "Error %d creating sysfs device attributes\n", + err); + } else { + /* + * Generate a udev event so that appropriate + * symlinks can be created based on udev + * rules. + */ + kobject_uevent(&port->dev->kobj, KOBJ_CHANGE); + } + break; + } +} + +static void control_work_handler(struct work_struct *work) +{ + struct ports_device *portdev; + struct virtqueue *vq; + struct port_buffer *buf; + unsigned int len; + + portdev = container_of(work, struct ports_device, control_work); + vq = portdev->c_ivq; + + spin_lock(&portdev->cvq_lock); + while ((buf = virtqueue_get_buf(vq, &len))) { + spin_unlock(&portdev->cvq_lock); + + buf->len = len; + buf->offset = 0; + + handle_control_message(portdev, buf); + + spin_lock(&portdev->cvq_lock); + if (add_inbuf(portdev->c_ivq, buf) < 0) { + dev_warn(&portdev->vdev->dev, + "Error adding buffer to queue\n"); + free_buf(buf); + } + } + spin_unlock(&portdev->cvq_lock); +} + +static void in_intr(struct virtqueue *vq) +{ + struct port *port; + unsigned long flags; + + port = find_port_by_vq(vq->vdev->priv, vq); + if (!port) + return; + + spin_lock_irqsave(&port->inbuf_lock, flags); + if (!port->inbuf) + port->inbuf = get_inbuf(port); + + /* + * Don't queue up data when port is closed. This condition + * can be reached when a console port is not yet connected (no + * tty is spawned) and the host sends out data to console + * ports. For generic serial ports, the host won't + * (shouldn't) send data till the guest is connected. + */ + if (!port->guest_connected) + discard_port_data(port); + + spin_unlock_irqrestore(&port->inbuf_lock, flags); + + wake_up_interruptible(&port->waitqueue); + + /* Send a SIGIO indicating new data in case the process asked for it */ + send_sigio_to_port(port); + + if (is_console_port(port) && hvc_poll(port->cons.hvc)) + hvc_kick(); +} + +static void control_intr(struct virtqueue *vq) +{ + struct ports_device *portdev; + + portdev = vq->vdev->priv; + schedule_work(&portdev->control_work); +} + +static void config_intr(struct virtio_device *vdev) +{ + struct ports_device *portdev; + + portdev = vdev->priv; + + if (!use_multiport(portdev)) { + struct port *port; + u16 rows, cols; + + vdev->config->get(vdev, + offsetof(struct virtio_console_config, cols), + &cols, sizeof(u16)); + vdev->config->get(vdev, + offsetof(struct virtio_console_config, rows), + &rows, sizeof(u16)); + + port = find_port_by_id(portdev, 0); + set_console_size(port, rows, cols); + + /* + * We'll use this way of resizing only for legacy + * support. For newer userspace + * (VIRTIO_CONSOLE_F_MULTPORT+), use control messages + * to indicate console size changes so that it can be + * done per-port. + */ + resize_console(port); + } +} + +static int init_vqs(struct ports_device *portdev) +{ + vq_callback_t **io_callbacks; + char **io_names; + struct virtqueue **vqs; + u32 i, j, nr_ports, nr_queues; + int err; + + nr_ports = portdev->config.max_nr_ports; + nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2; + + vqs = kmalloc(nr_queues * sizeof(struct virtqueue *), GFP_KERNEL); + io_callbacks = kmalloc(nr_queues * sizeof(vq_callback_t *), GFP_KERNEL); + io_names = kmalloc(nr_queues * sizeof(char *), GFP_KERNEL); + portdev->in_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *), + GFP_KERNEL); + portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *), + GFP_KERNEL); + if (!vqs || !io_callbacks || !io_names || !portdev->in_vqs || + !portdev->out_vqs) { + err = -ENOMEM; + goto free; + } + + /* + * For backward compat (newer host but older guest), the host + * spawns a console port first and also inits the vqs for port + * 0 before others. + */ + j = 0; + io_callbacks[j] = in_intr; + io_callbacks[j + 1] = NULL; + io_names[j] = "input"; + io_names[j + 1] = "output"; + j += 2; + + if (use_multiport(portdev)) { + io_callbacks[j] = control_intr; + io_callbacks[j + 1] = NULL; + io_names[j] = "control-i"; + io_names[j + 1] = "control-o"; + + for (i = 1; i < nr_ports; i++) { + j += 2; + io_callbacks[j] = in_intr; + io_callbacks[j + 1] = NULL; + io_names[j] = "input"; + io_names[j + 1] = "output"; + } + } + /* Find the queues. */ + err = portdev->vdev->config->find_vqs(portdev->vdev, nr_queues, vqs, + io_callbacks, + (const char **)io_names); + if (err) + goto free; + + j = 0; + portdev->in_vqs[0] = vqs[0]; + portdev->out_vqs[0] = vqs[1]; + j += 2; + if (use_multiport(portdev)) { + portdev->c_ivq = vqs[j]; + portdev->c_ovq = vqs[j + 1]; + + for (i = 1; i < nr_ports; i++) { + j += 2; + portdev->in_vqs[i] = vqs[j]; + portdev->out_vqs[i] = vqs[j + 1]; + } + } + kfree(io_names); + kfree(io_callbacks); + kfree(vqs); + + return 0; + +free: + kfree(portdev->out_vqs); + kfree(portdev->in_vqs); + kfree(io_names); + kfree(io_callbacks); + kfree(vqs); + + return err; +} + +static const struct file_operations portdev_fops = { + .owner = THIS_MODULE, +}; + +/* + * Once we're further in boot, we get probed like any other virtio + * device. + * + * If the host also supports multiple console ports, we check the + * config space to see how many ports the host has spawned. We + * initialize each port found. + */ +static int __devinit virtcons_probe(struct virtio_device *vdev) +{ + struct ports_device *portdev; + int err; + bool multiport; + + portdev = kmalloc(sizeof(*portdev), GFP_KERNEL); + if (!portdev) { + err = -ENOMEM; + goto fail; + } + + /* Attach this portdev to this virtio_device, and vice-versa. */ + portdev->vdev = vdev; + vdev->priv = portdev; + + spin_lock_irq(&pdrvdata_lock); + portdev->drv_index = pdrvdata.index++; + spin_unlock_irq(&pdrvdata_lock); + + portdev->chr_major = register_chrdev(0, "virtio-portsdev", + &portdev_fops); + if (portdev->chr_major < 0) { + dev_err(&vdev->dev, + "Error %d registering chrdev for device %u\n", + portdev->chr_major, portdev->drv_index); + err = portdev->chr_major; + goto free; + } + + multiport = false; + portdev->config.max_nr_ports = 1; + if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT)) { + multiport = true; + vdev->features[0] |= 1 << VIRTIO_CONSOLE_F_MULTIPORT; + + vdev->config->get(vdev, offsetof(struct virtio_console_config, + max_nr_ports), + &portdev->config.max_nr_ports, + sizeof(portdev->config.max_nr_ports)); + } + + /* Let the Host know we support multiple ports.*/ + vdev->config->finalize_features(vdev); + + err = init_vqs(portdev); + if (err < 0) { + dev_err(&vdev->dev, "Error %d initializing vqs\n", err); + goto free_chrdev; + } + + spin_lock_init(&portdev->ports_lock); + INIT_LIST_HEAD(&portdev->ports); + + if (multiport) { + unsigned int nr_added_bufs; + + spin_lock_init(&portdev->cvq_lock); + INIT_WORK(&portdev->control_work, &control_work_handler); + + nr_added_bufs = fill_queue(portdev->c_ivq, &portdev->cvq_lock); + if (!nr_added_bufs) { + dev_err(&vdev->dev, + "Error allocating buffers for control queue\n"); + err = -ENOMEM; + goto free_vqs; + } + } else { + /* + * For backward compatibility: Create a console port + * if we're running on older host. + */ + add_port(portdev, 0); + } + + spin_lock_irq(&pdrvdata_lock); + list_add_tail(&portdev->list, &pdrvdata.portdevs); + spin_unlock_irq(&pdrvdata_lock); + + __send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID, + VIRTIO_CONSOLE_DEVICE_READY, 1); + return 0; + +free_vqs: + /* The host might want to notify mgmt sw about device add failure */ + __send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID, + VIRTIO_CONSOLE_DEVICE_READY, 0); + vdev->config->del_vqs(vdev); + kfree(portdev->in_vqs); + kfree(portdev->out_vqs); +free_chrdev: + unregister_chrdev(portdev->chr_major, "virtio-portsdev"); +free: + kfree(portdev); +fail: + return err; +} + +static void virtcons_remove(struct virtio_device *vdev) +{ + struct ports_device *portdev; + struct port *port, *port2; + + portdev = vdev->priv; + + spin_lock_irq(&pdrvdata_lock); + list_del(&portdev->list); + spin_unlock_irq(&pdrvdata_lock); + + /* Disable interrupts for vqs */ + vdev->config->reset(vdev); + /* Finish up work that's lined up */ + cancel_work_sync(&portdev->control_work); + + list_for_each_entry_safe(port, port2, &portdev->ports, list) + unplug_port(port); + + unregister_chrdev(portdev->chr_major, "virtio-portsdev"); + + /* + * When yanking out a device, we immediately lose the + * (device-side) queues. So there's no point in keeping the + * guest side around till we drop our final reference. This + * also means that any ports which are in an open state will + * have to just stop using the port, as the vqs are going + * away. + */ + if (use_multiport(portdev)) { + struct port_buffer *buf; + unsigned int len; + + while ((buf = virtqueue_get_buf(portdev->c_ivq, &len))) + free_buf(buf); + + while ((buf = virtqueue_detach_unused_buf(portdev->c_ivq))) + free_buf(buf); + } + + vdev->config->del_vqs(vdev); + kfree(portdev->in_vqs); + kfree(portdev->out_vqs); + + kfree(portdev); +} + +static struct virtio_device_id id_table[] = { + { VIRTIO_ID_CONSOLE, VIRTIO_DEV_ANY_ID }, + { 0 }, +}; + +static unsigned int features[] = { + VIRTIO_CONSOLE_F_SIZE, + VIRTIO_CONSOLE_F_MULTIPORT, +}; + +static struct virtio_driver virtio_console = { + .feature_table = features, + .feature_table_size = ARRAY_SIZE(features), + .driver.name = KBUILD_MODNAME, + .driver.owner = THIS_MODULE, + .id_table = id_table, + .probe = virtcons_probe, + .remove = virtcons_remove, + .config_changed = config_intr, +}; + +static int __init init(void) +{ + int err; + + pdrvdata.class = class_create(THIS_MODULE, "virtio-ports"); + if (IS_ERR(pdrvdata.class)) { + err = PTR_ERR(pdrvdata.class); + pr_err("Error %d creating virtio-ports class\n", err); + return err; + } + + pdrvdata.debugfs_dir = debugfs_create_dir("virtio-ports", NULL); + if (!pdrvdata.debugfs_dir) { + pr_warning("Error %ld creating debugfs dir for virtio-ports\n", + PTR_ERR(pdrvdata.debugfs_dir)); + } + INIT_LIST_HEAD(&pdrvdata.consoles); + INIT_LIST_HEAD(&pdrvdata.portdevs); + + return register_virtio_driver(&virtio_console); +} + +static void __exit fini(void) +{ + unregister_virtio_driver(&virtio_console); + + class_destroy(pdrvdata.class); + if (pdrvdata.debugfs_dir) + debugfs_remove_recursive(pdrvdata.debugfs_dir); +} +module_init(init); +module_exit(fini); + +MODULE_DEVICE_TABLE(virtio, id_table); +MODULE_DESCRIPTION("Virtio console driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.1 From ab4382d27412e7e3e7c936e8d50d8888dfac3df8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 13 Jan 2011 12:10:18 -0800 Subject: tty: move drivers/serial/ to drivers/tty/serial/ The serial drivers are really just tty drivers, so move them to drivers/tty/ to make things a bit neater overall. This is part of the tty/serial driver movement proceedure as proposed by Arnd Bergmann and approved by everyone involved a number of months ago. Cc: Arnd Bergmann Cc: Alan Cox Cc: Geert Uytterhoeven Cc: Rogier Wolff Cc: Michael H. Warfield Signed-off-by: Greg Kroah-Hartman --- drivers/Makefile | 3 +- drivers/char/Kconfig | 2 +- drivers/serial/21285.c | 513 --- drivers/serial/68328serial.c | 1472 --------- drivers/serial/68328serial.h | 188 -- drivers/serial/68360serial.c | 2978 ----------------- drivers/serial/8250.c | 3377 -------------------- drivers/serial/8250.h | 80 - drivers/serial/8250_accent.c | 47 - drivers/serial/8250_acorn.c | 141 - drivers/serial/8250_boca.c | 61 - drivers/serial/8250_early.c | 287 -- drivers/serial/8250_exar_st16c554.c | 52 - drivers/serial/8250_fourport.c | 53 - drivers/serial/8250_gsc.c | 122 - drivers/serial/8250_hp300.c | 327 -- drivers/serial/8250_hub6.c | 58 - drivers/serial/8250_mca.c | 63 - drivers/serial/8250_pci.c | 3850 ---------------------- drivers/serial/8250_pnp.c | 523 --- drivers/serial/Kconfig | 1598 ---------- drivers/serial/Makefile | 94 - drivers/serial/altera_jtaguart.c | 504 --- drivers/serial/altera_uart.c | 608 ---- drivers/serial/amba-pl010.c | 825 ----- drivers/serial/amba-pl011.c | 1519 --------- drivers/serial/apbuart.c | 709 ----- drivers/serial/apbuart.h | 64 - drivers/serial/atmel_serial.c | 1808 ----------- drivers/serial/bcm63xx_uart.c | 891 ------ drivers/serial/bfin_5xx.c | 1600 ---------- drivers/serial/bfin_sport_uart.c | 935 ------ drivers/serial/bfin_sport_uart.h | 86 - drivers/serial/clps711x.c | 579 ---- drivers/serial/cpm_uart/Makefile | 11 - drivers/serial/cpm_uart/cpm_uart.h | 147 - drivers/serial/cpm_uart/cpm_uart_core.c | 1443 --------- drivers/serial/cpm_uart/cpm_uart_cpm1.c | 138 - drivers/serial/cpm_uart/cpm_uart_cpm1.h | 34 - drivers/serial/cpm_uart/cpm_uart_cpm2.c | 174 - drivers/serial/cpm_uart/cpm_uart_cpm2.h | 34 - drivers/serial/crisv10.c | 4573 --------------------------- drivers/serial/crisv10.h | 147 - drivers/serial/dz.c | 955 ------ drivers/serial/dz.h | 129 - drivers/serial/icom.c | 1658 ---------- drivers/serial/icom.h | 287 -- drivers/serial/ifx6x60.c | 1406 -------- drivers/serial/ifx6x60.h | 129 - drivers/serial/imx.c | 1380 -------- drivers/serial/ioc3_serial.c | 2199 ------------- drivers/serial/ioc4_serial.c | 2953 ----------------- drivers/serial/ip22zilog.c | 1221 ------- drivers/serial/ip22zilog.h | 281 -- drivers/serial/jsm/Makefile | 8 - drivers/serial/jsm/jsm.h | 388 --- drivers/serial/jsm/jsm_driver.c | 297 -- drivers/serial/jsm/jsm_neo.c | 1412 --------- drivers/serial/jsm/jsm_tty.c | 910 ------ drivers/serial/kgdboc.c | 328 -- drivers/serial/m32r_sio.c | 1192 ------- drivers/serial/m32r_sio.h | 48 - drivers/serial/m32r_sio_reg.h | 152 - drivers/serial/max3100.c | 926 ------ drivers/serial/max3107-aava.c | 344 -- drivers/serial/max3107.c | 1213 ------- drivers/serial/max3107.h | 441 --- drivers/serial/mcf.c | 662 ---- drivers/serial/mfd.c | 1513 --------- drivers/serial/mpc52xx_uart.c | 1527 --------- drivers/serial/mpsc.c | 2159 ------------- drivers/serial/mrst_max3110.c | 919 ------ drivers/serial/mrst_max3110.h | 60 - drivers/serial/msm_serial.c | 758 ----- drivers/serial/msm_serial.h | 173 - drivers/serial/mux.c | 633 ---- drivers/serial/netx-serial.c | 750 ----- drivers/serial/nwpserial.c | 477 --- drivers/serial/of_serial.c | 201 -- drivers/serial/omap-serial.c | 1359 -------- drivers/serial/pch_uart.c | 1451 --------- drivers/serial/pmac_zilog.c | 2208 ------------- drivers/serial/pmac_zilog.h | 396 --- drivers/serial/pnx8xxx_uart.c | 854 ----- drivers/serial/pxa.c | 879 ----- drivers/serial/s3c2400.c | 106 - drivers/serial/s3c2410.c | 118 - drivers/serial/s3c2412.c | 152 - drivers/serial/s3c2440.c | 181 -- drivers/serial/s3c24a0.c | 118 - drivers/serial/s3c6400.c | 152 - drivers/serial/s5pv210.c | 162 - drivers/serial/sa1100.c | 918 ------ drivers/serial/samsung.c | 1487 --------- drivers/serial/samsung.h | 120 - drivers/serial/sb1250-duart.c | 976 ------ drivers/serial/sc26xx.c | 757 ----- drivers/serial/serial_core.c | 2578 --------------- drivers/serial/serial_cs.c | 869 ----- drivers/serial/serial_ks8695.c | 705 ----- drivers/serial/serial_lh7a40x.c | 682 ---- drivers/serial/serial_txx9.c | 1344 -------- drivers/serial/sh-sci.c | 2027 ------------ drivers/serial/sh-sci.h | 660 ---- drivers/serial/sn_console.c | 1085 ------- drivers/serial/suncore.c | 247 -- drivers/serial/suncore.h | 33 - drivers/serial/sunhv.c | 661 ---- drivers/serial/sunsab.c | 1152 ------- drivers/serial/sunsab.h | 322 -- drivers/serial/sunsu.c | 1608 ---------- drivers/serial/sunzilog.c | 1655 ---------- drivers/serial/sunzilog.h | 289 -- drivers/serial/timbuart.c | 531 ---- drivers/serial/timbuart.h | 58 - drivers/serial/uartlite.c | 709 ----- drivers/serial/ucc_uart.c | 1537 --------- drivers/serial/vr41xx_siu.c | 978 ------ drivers/serial/vt8500_serial.c | 648 ---- drivers/serial/zs.c | 1304 -------- drivers/serial/zs.h | 284 -- drivers/tty/Makefile | 1 + drivers/tty/serial/21285.c | 513 +++ drivers/tty/serial/68328serial.c | 1472 +++++++++ drivers/tty/serial/68328serial.h | 188 ++ drivers/tty/serial/68360serial.c | 2978 +++++++++++++++++ drivers/tty/serial/8250.c | 3377 ++++++++++++++++++++ drivers/tty/serial/8250.h | 80 + drivers/tty/serial/8250_accent.c | 47 + drivers/tty/serial/8250_acorn.c | 141 + drivers/tty/serial/8250_boca.c | 61 + drivers/tty/serial/8250_early.c | 287 ++ drivers/tty/serial/8250_exar_st16c554.c | 52 + drivers/tty/serial/8250_fourport.c | 53 + drivers/tty/serial/8250_gsc.c | 122 + drivers/tty/serial/8250_hp300.c | 327 ++ drivers/tty/serial/8250_hub6.c | 58 + drivers/tty/serial/8250_mca.c | 63 + drivers/tty/serial/8250_pci.c | 3850 ++++++++++++++++++++++ drivers/tty/serial/8250_pnp.c | 523 +++ drivers/tty/serial/Kconfig | 1598 ++++++++++ drivers/tty/serial/Makefile | 94 + drivers/tty/serial/altera_jtaguart.c | 504 +++ drivers/tty/serial/altera_uart.c | 608 ++++ drivers/tty/serial/amba-pl010.c | 825 +++++ drivers/tty/serial/amba-pl011.c | 1519 +++++++++ drivers/tty/serial/apbuart.c | 709 +++++ drivers/tty/serial/apbuart.h | 64 + drivers/tty/serial/atmel_serial.c | 1808 +++++++++++ drivers/tty/serial/bcm63xx_uart.c | 891 ++++++ drivers/tty/serial/bfin_5xx.c | 1600 ++++++++++ drivers/tty/serial/bfin_sport_uart.c | 935 ++++++ drivers/tty/serial/bfin_sport_uart.h | 86 + drivers/tty/serial/clps711x.c | 579 ++++ drivers/tty/serial/cpm_uart/Makefile | 11 + drivers/tty/serial/cpm_uart/cpm_uart.h | 147 + drivers/tty/serial/cpm_uart/cpm_uart_core.c | 1443 +++++++++ drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c | 138 + drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h | 34 + drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c | 174 + drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h | 34 + drivers/tty/serial/crisv10.c | 4573 +++++++++++++++++++++++++++ drivers/tty/serial/crisv10.h | 147 + drivers/tty/serial/dz.c | 955 ++++++ drivers/tty/serial/dz.h | 129 + drivers/tty/serial/icom.c | 1658 ++++++++++ drivers/tty/serial/icom.h | 287 ++ drivers/tty/serial/ifx6x60.c | 1406 ++++++++ drivers/tty/serial/ifx6x60.h | 129 + drivers/tty/serial/imx.c | 1380 ++++++++ drivers/tty/serial/ioc3_serial.c | 2199 +++++++++++++ drivers/tty/serial/ioc4_serial.c | 2953 +++++++++++++++++ drivers/tty/serial/ip22zilog.c | 1221 +++++++ drivers/tty/serial/ip22zilog.h | 281 ++ drivers/tty/serial/jsm/Makefile | 8 + drivers/tty/serial/jsm/jsm.h | 388 +++ drivers/tty/serial/jsm/jsm_driver.c | 297 ++ drivers/tty/serial/jsm/jsm_neo.c | 1412 +++++++++ drivers/tty/serial/jsm/jsm_tty.c | 910 ++++++ drivers/tty/serial/kgdboc.c | 328 ++ drivers/tty/serial/m32r_sio.c | 1192 +++++++ drivers/tty/serial/m32r_sio.h | 48 + drivers/tty/serial/m32r_sio_reg.h | 152 + drivers/tty/serial/max3100.c | 926 ++++++ drivers/tty/serial/max3107-aava.c | 344 ++ drivers/tty/serial/max3107.c | 1213 +++++++ drivers/tty/serial/max3107.h | 441 +++ drivers/tty/serial/mcf.c | 662 ++++ drivers/tty/serial/mfd.c | 1513 +++++++++ drivers/tty/serial/mpc52xx_uart.c | 1527 +++++++++ drivers/tty/serial/mpsc.c | 2159 +++++++++++++ drivers/tty/serial/mrst_max3110.c | 919 ++++++ drivers/tty/serial/mrst_max3110.h | 60 + drivers/tty/serial/msm_serial.c | 758 +++++ drivers/tty/serial/msm_serial.h | 173 + drivers/tty/serial/mux.c | 633 ++++ drivers/tty/serial/netx-serial.c | 750 +++++ drivers/tty/serial/nwpserial.c | 477 +++ drivers/tty/serial/of_serial.c | 201 ++ drivers/tty/serial/omap-serial.c | 1359 ++++++++ drivers/tty/serial/pch_uart.c | 1451 +++++++++ drivers/tty/serial/pmac_zilog.c | 2208 +++++++++++++ drivers/tty/serial/pmac_zilog.h | 396 +++ drivers/tty/serial/pnx8xxx_uart.c | 854 +++++ drivers/tty/serial/pxa.c | 879 +++++ drivers/tty/serial/s3c2400.c | 106 + drivers/tty/serial/s3c2410.c | 118 + drivers/tty/serial/s3c2412.c | 152 + drivers/tty/serial/s3c2440.c | 181 ++ drivers/tty/serial/s3c24a0.c | 118 + drivers/tty/serial/s3c6400.c | 152 + drivers/tty/serial/s5pv210.c | 162 + drivers/tty/serial/sa1100.c | 918 ++++++ drivers/tty/serial/samsung.c | 1487 +++++++++ drivers/tty/serial/samsung.h | 120 + drivers/tty/serial/sb1250-duart.c | 976 ++++++ drivers/tty/serial/sc26xx.c | 757 +++++ drivers/tty/serial/serial_core.c | 2578 +++++++++++++++ drivers/tty/serial/serial_cs.c | 869 +++++ drivers/tty/serial/serial_ks8695.c | 705 +++++ drivers/tty/serial/serial_lh7a40x.c | 682 ++++ drivers/tty/serial/serial_txx9.c | 1344 ++++++++ drivers/tty/serial/sh-sci.c | 2027 ++++++++++++ drivers/tty/serial/sh-sci.h | 660 ++++ drivers/tty/serial/sn_console.c | 1085 +++++++ drivers/tty/serial/suncore.c | 247 ++ drivers/tty/serial/suncore.h | 33 + drivers/tty/serial/sunhv.c | 661 ++++ drivers/tty/serial/sunsab.c | 1152 +++++++ drivers/tty/serial/sunsab.h | 322 ++ drivers/tty/serial/sunsu.c | 1608 ++++++++++ drivers/tty/serial/sunzilog.c | 1655 ++++++++++ drivers/tty/serial/sunzilog.h | 289 ++ drivers/tty/serial/timbuart.c | 531 ++++ drivers/tty/serial/timbuart.h | 58 + drivers/tty/serial/uartlite.c | 709 +++++ drivers/tty/serial/ucc_uart.c | 1537 +++++++++ drivers/tty/serial/vr41xx_siu.c | 978 ++++++ drivers/tty/serial/vt8500_serial.c | 648 ++++ drivers/tty/serial/zs.c | 1304 ++++++++ drivers/tty/serial/zs.h | 284 ++ 241 files changed, 97165 insertions(+), 97165 deletions(-) delete mode 100644 drivers/serial/21285.c delete mode 100644 drivers/serial/68328serial.c delete mode 100644 drivers/serial/68328serial.h delete mode 100644 drivers/serial/68360serial.c delete mode 100644 drivers/serial/8250.c delete mode 100644 drivers/serial/8250.h delete mode 100644 drivers/serial/8250_accent.c delete mode 100644 drivers/serial/8250_acorn.c delete mode 100644 drivers/serial/8250_boca.c delete mode 100644 drivers/serial/8250_early.c delete mode 100644 drivers/serial/8250_exar_st16c554.c delete mode 100644 drivers/serial/8250_fourport.c delete mode 100644 drivers/serial/8250_gsc.c delete mode 100644 drivers/serial/8250_hp300.c delete mode 100644 drivers/serial/8250_hub6.c delete mode 100644 drivers/serial/8250_mca.c delete mode 100644 drivers/serial/8250_pci.c delete mode 100644 drivers/serial/8250_pnp.c delete mode 100644 drivers/serial/Kconfig delete mode 100644 drivers/serial/Makefile delete mode 100644 drivers/serial/altera_jtaguart.c delete mode 100644 drivers/serial/altera_uart.c delete mode 100644 drivers/serial/amba-pl010.c delete mode 100644 drivers/serial/amba-pl011.c delete mode 100644 drivers/serial/apbuart.c delete mode 100644 drivers/serial/apbuart.h delete mode 100644 drivers/serial/atmel_serial.c delete mode 100644 drivers/serial/bcm63xx_uart.c delete mode 100644 drivers/serial/bfin_5xx.c delete mode 100644 drivers/serial/bfin_sport_uart.c delete mode 100644 drivers/serial/bfin_sport_uart.h delete mode 100644 drivers/serial/clps711x.c delete mode 100644 drivers/serial/cpm_uart/Makefile delete mode 100644 drivers/serial/cpm_uart/cpm_uart.h delete mode 100644 drivers/serial/cpm_uart/cpm_uart_core.c delete mode 100644 drivers/serial/cpm_uart/cpm_uart_cpm1.c delete mode 100644 drivers/serial/cpm_uart/cpm_uart_cpm1.h delete mode 100644 drivers/serial/cpm_uart/cpm_uart_cpm2.c delete mode 100644 drivers/serial/cpm_uart/cpm_uart_cpm2.h delete mode 100644 drivers/serial/crisv10.c delete mode 100644 drivers/serial/crisv10.h delete mode 100644 drivers/serial/dz.c delete mode 100644 drivers/serial/dz.h delete mode 100644 drivers/serial/icom.c delete mode 100644 drivers/serial/icom.h delete mode 100644 drivers/serial/ifx6x60.c delete mode 100644 drivers/serial/ifx6x60.h delete mode 100644 drivers/serial/imx.c delete mode 100644 drivers/serial/ioc3_serial.c delete mode 100644 drivers/serial/ioc4_serial.c delete mode 100644 drivers/serial/ip22zilog.c delete mode 100644 drivers/serial/ip22zilog.h delete mode 100644 drivers/serial/jsm/Makefile delete mode 100644 drivers/serial/jsm/jsm.h delete mode 100644 drivers/serial/jsm/jsm_driver.c delete mode 100644 drivers/serial/jsm/jsm_neo.c delete mode 100644 drivers/serial/jsm/jsm_tty.c delete mode 100644 drivers/serial/kgdboc.c delete mode 100644 drivers/serial/m32r_sio.c delete mode 100644 drivers/serial/m32r_sio.h delete mode 100644 drivers/serial/m32r_sio_reg.h delete mode 100644 drivers/serial/max3100.c delete mode 100644 drivers/serial/max3107-aava.c delete mode 100644 drivers/serial/max3107.c delete mode 100644 drivers/serial/max3107.h delete mode 100644 drivers/serial/mcf.c delete mode 100644 drivers/serial/mfd.c delete mode 100644 drivers/serial/mpc52xx_uart.c delete mode 100644 drivers/serial/mpsc.c delete mode 100644 drivers/serial/mrst_max3110.c delete mode 100644 drivers/serial/mrst_max3110.h delete mode 100644 drivers/serial/msm_serial.c delete mode 100644 drivers/serial/msm_serial.h delete mode 100644 drivers/serial/mux.c delete mode 100644 drivers/serial/netx-serial.c delete mode 100644 drivers/serial/nwpserial.c delete mode 100644 drivers/serial/of_serial.c delete mode 100644 drivers/serial/omap-serial.c delete mode 100644 drivers/serial/pch_uart.c delete mode 100644 drivers/serial/pmac_zilog.c delete mode 100644 drivers/serial/pmac_zilog.h delete mode 100644 drivers/serial/pnx8xxx_uart.c delete mode 100644 drivers/serial/pxa.c delete mode 100644 drivers/serial/s3c2400.c delete mode 100644 drivers/serial/s3c2410.c delete mode 100644 drivers/serial/s3c2412.c delete mode 100644 drivers/serial/s3c2440.c delete mode 100644 drivers/serial/s3c24a0.c delete mode 100644 drivers/serial/s3c6400.c delete mode 100644 drivers/serial/s5pv210.c delete mode 100644 drivers/serial/sa1100.c delete mode 100644 drivers/serial/samsung.c delete mode 100644 drivers/serial/samsung.h delete mode 100644 drivers/serial/sb1250-duart.c delete mode 100644 drivers/serial/sc26xx.c delete mode 100644 drivers/serial/serial_core.c delete mode 100644 drivers/serial/serial_cs.c delete mode 100644 drivers/serial/serial_ks8695.c delete mode 100644 drivers/serial/serial_lh7a40x.c delete mode 100644 drivers/serial/serial_txx9.c delete mode 100644 drivers/serial/sh-sci.c delete mode 100644 drivers/serial/sh-sci.h delete mode 100644 drivers/serial/sn_console.c delete mode 100644 drivers/serial/suncore.c delete mode 100644 drivers/serial/suncore.h delete mode 100644 drivers/serial/sunhv.c delete mode 100644 drivers/serial/sunsab.c delete mode 100644 drivers/serial/sunsab.h delete mode 100644 drivers/serial/sunsu.c delete mode 100644 drivers/serial/sunzilog.c delete mode 100644 drivers/serial/sunzilog.h delete mode 100644 drivers/serial/timbuart.c delete mode 100644 drivers/serial/timbuart.h delete mode 100644 drivers/serial/uartlite.c delete mode 100644 drivers/serial/ucc_uart.c delete mode 100644 drivers/serial/vr41xx_siu.c delete mode 100644 drivers/serial/vt8500_serial.c delete mode 100644 drivers/serial/zs.c delete mode 100644 drivers/serial/zs.h create mode 100644 drivers/tty/serial/21285.c create mode 100644 drivers/tty/serial/68328serial.c create mode 100644 drivers/tty/serial/68328serial.h create mode 100644 drivers/tty/serial/68360serial.c create mode 100644 drivers/tty/serial/8250.c create mode 100644 drivers/tty/serial/8250.h create mode 100644 drivers/tty/serial/8250_accent.c create mode 100644 drivers/tty/serial/8250_acorn.c create mode 100644 drivers/tty/serial/8250_boca.c create mode 100644 drivers/tty/serial/8250_early.c create mode 100644 drivers/tty/serial/8250_exar_st16c554.c create mode 100644 drivers/tty/serial/8250_fourport.c create mode 100644 drivers/tty/serial/8250_gsc.c create mode 100644 drivers/tty/serial/8250_hp300.c create mode 100644 drivers/tty/serial/8250_hub6.c create mode 100644 drivers/tty/serial/8250_mca.c create mode 100644 drivers/tty/serial/8250_pci.c create mode 100644 drivers/tty/serial/8250_pnp.c create mode 100644 drivers/tty/serial/Kconfig create mode 100644 drivers/tty/serial/Makefile create mode 100644 drivers/tty/serial/altera_jtaguart.c create mode 100644 drivers/tty/serial/altera_uart.c create mode 100644 drivers/tty/serial/amba-pl010.c create mode 100644 drivers/tty/serial/amba-pl011.c create mode 100644 drivers/tty/serial/apbuart.c create mode 100644 drivers/tty/serial/apbuart.h create mode 100644 drivers/tty/serial/atmel_serial.c create mode 100644 drivers/tty/serial/bcm63xx_uart.c create mode 100644 drivers/tty/serial/bfin_5xx.c create mode 100644 drivers/tty/serial/bfin_sport_uart.c create mode 100644 drivers/tty/serial/bfin_sport_uart.h create mode 100644 drivers/tty/serial/clps711x.c create mode 100644 drivers/tty/serial/cpm_uart/Makefile create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart.h create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_core.c create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h create mode 100644 drivers/tty/serial/crisv10.c create mode 100644 drivers/tty/serial/crisv10.h create mode 100644 drivers/tty/serial/dz.c create mode 100644 drivers/tty/serial/dz.h create mode 100644 drivers/tty/serial/icom.c create mode 100644 drivers/tty/serial/icom.h create mode 100644 drivers/tty/serial/ifx6x60.c create mode 100644 drivers/tty/serial/ifx6x60.h create mode 100644 drivers/tty/serial/imx.c create mode 100644 drivers/tty/serial/ioc3_serial.c create mode 100644 drivers/tty/serial/ioc4_serial.c create mode 100644 drivers/tty/serial/ip22zilog.c create mode 100644 drivers/tty/serial/ip22zilog.h create mode 100644 drivers/tty/serial/jsm/Makefile create mode 100644 drivers/tty/serial/jsm/jsm.h create mode 100644 drivers/tty/serial/jsm/jsm_driver.c create mode 100644 drivers/tty/serial/jsm/jsm_neo.c create mode 100644 drivers/tty/serial/jsm/jsm_tty.c create mode 100644 drivers/tty/serial/kgdboc.c create mode 100644 drivers/tty/serial/m32r_sio.c create mode 100644 drivers/tty/serial/m32r_sio.h create mode 100644 drivers/tty/serial/m32r_sio_reg.h create mode 100644 drivers/tty/serial/max3100.c create mode 100644 drivers/tty/serial/max3107-aava.c create mode 100644 drivers/tty/serial/max3107.c create mode 100644 drivers/tty/serial/max3107.h create mode 100644 drivers/tty/serial/mcf.c create mode 100644 drivers/tty/serial/mfd.c create mode 100644 drivers/tty/serial/mpc52xx_uart.c create mode 100644 drivers/tty/serial/mpsc.c create mode 100644 drivers/tty/serial/mrst_max3110.c create mode 100644 drivers/tty/serial/mrst_max3110.h create mode 100644 drivers/tty/serial/msm_serial.c create mode 100644 drivers/tty/serial/msm_serial.h create mode 100644 drivers/tty/serial/mux.c create mode 100644 drivers/tty/serial/netx-serial.c create mode 100644 drivers/tty/serial/nwpserial.c create mode 100644 drivers/tty/serial/of_serial.c create mode 100644 drivers/tty/serial/omap-serial.c create mode 100644 drivers/tty/serial/pch_uart.c create mode 100644 drivers/tty/serial/pmac_zilog.c create mode 100644 drivers/tty/serial/pmac_zilog.h create mode 100644 drivers/tty/serial/pnx8xxx_uart.c create mode 100644 drivers/tty/serial/pxa.c create mode 100644 drivers/tty/serial/s3c2400.c create mode 100644 drivers/tty/serial/s3c2410.c create mode 100644 drivers/tty/serial/s3c2412.c create mode 100644 drivers/tty/serial/s3c2440.c create mode 100644 drivers/tty/serial/s3c24a0.c create mode 100644 drivers/tty/serial/s3c6400.c create mode 100644 drivers/tty/serial/s5pv210.c create mode 100644 drivers/tty/serial/sa1100.c create mode 100644 drivers/tty/serial/samsung.c create mode 100644 drivers/tty/serial/samsung.h create mode 100644 drivers/tty/serial/sb1250-duart.c create mode 100644 drivers/tty/serial/sc26xx.c create mode 100644 drivers/tty/serial/serial_core.c create mode 100644 drivers/tty/serial/serial_cs.c create mode 100644 drivers/tty/serial/serial_ks8695.c create mode 100644 drivers/tty/serial/serial_lh7a40x.c create mode 100644 drivers/tty/serial/serial_txx9.c create mode 100644 drivers/tty/serial/sh-sci.c create mode 100644 drivers/tty/serial/sh-sci.h create mode 100644 drivers/tty/serial/sn_console.c create mode 100644 drivers/tty/serial/suncore.c create mode 100644 drivers/tty/serial/suncore.h create mode 100644 drivers/tty/serial/sunhv.c create mode 100644 drivers/tty/serial/sunsab.c create mode 100644 drivers/tty/serial/sunsab.h create mode 100644 drivers/tty/serial/sunsu.c create mode 100644 drivers/tty/serial/sunzilog.c create mode 100644 drivers/tty/serial/sunzilog.h create mode 100644 drivers/tty/serial/timbuart.c create mode 100644 drivers/tty/serial/timbuart.h create mode 100644 drivers/tty/serial/uartlite.c create mode 100644 drivers/tty/serial/ucc_uart.c create mode 100644 drivers/tty/serial/vr41xx_siu.c create mode 100644 drivers/tty/serial/vt8500_serial.c create mode 100644 drivers/tty/serial/zs.c create mode 100644 drivers/tty/serial/zs.h (limited to 'drivers') diff --git a/drivers/Makefile b/drivers/Makefile index ef5132469f58..1e2cda18c718 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -24,7 +24,7 @@ obj-$(CONFIG_XEN) += xen/ # regulators early, since some subsystems rely on them to initialize obj-$(CONFIG_REGULATOR) += regulator/ -# char/ comes before serial/ etc so that the VT console is the boot-time +# tty/ comes before char/ so that the VT console is the boot-time # default. obj-y += tty/ obj-y += char/ @@ -38,7 +38,6 @@ obj-$(CONFIG_CONNECTOR) += connector/ obj-$(CONFIG_FB_I810) += video/i810/ obj-$(CONFIG_FB_INTEL) += video/intelfb/ -obj-y += serial/ obj-$(CONFIG_PARPORT) += parport/ obj-y += base/ block/ misc/ mfd/ nfc/ obj-$(CONFIG_NUBUS) += nubus/ diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 0f175a866ef0..ccac7d090727 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -426,7 +426,7 @@ config SGI_MBCS If you have an SGI Altix with an attached SABrick say Y or M here, otherwise say N. -source "drivers/serial/Kconfig" +source "drivers/tty/serial/Kconfig" config UNIX98_PTYS bool "Unix98 PTY support" if EMBEDDED diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c deleted file mode 100644 index d89aa38c5cf0..000000000000 --- a/drivers/serial/21285.c +++ /dev/null @@ -1,513 +0,0 @@ -/* - * linux/drivers/serial/21285.c - * - * Driver for the serial port on the 21285 StrongArm-110 core logic chip. - * - * Based on drivers/char/serial.c - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#define BAUD_BASE (mem_fclk_21285/64) - -#define SERIAL_21285_NAME "ttyFB" -#define SERIAL_21285_MAJOR 204 -#define SERIAL_21285_MINOR 4 - -#define RXSTAT_DUMMY_READ 0x80000000 -#define RXSTAT_FRAME (1 << 0) -#define RXSTAT_PARITY (1 << 1) -#define RXSTAT_OVERRUN (1 << 2) -#define RXSTAT_ANYERR (RXSTAT_FRAME|RXSTAT_PARITY|RXSTAT_OVERRUN) - -#define H_UBRLCR_BREAK (1 << 0) -#define H_UBRLCR_PARENB (1 << 1) -#define H_UBRLCR_PAREVN (1 << 2) -#define H_UBRLCR_STOPB (1 << 3) -#define H_UBRLCR_FIFO (1 << 4) - -static const char serial21285_name[] = "Footbridge UART"; - -#define tx_enabled(port) ((port)->unused[0]) -#define rx_enabled(port) ((port)->unused[1]) - -/* - * The documented expression for selecting the divisor is: - * BAUD_BASE / baud - 1 - * However, typically BAUD_BASE is not divisible by baud, so - * we want to select the divisor that gives us the minimum - * error. Therefore, we want: - * int(BAUD_BASE / baud - 0.5) -> - * int(BAUD_BASE / baud - (baud >> 1) / baud) -> - * int((BAUD_BASE - (baud >> 1)) / baud) - */ - -static void serial21285_stop_tx(struct uart_port *port) -{ - if (tx_enabled(port)) { - disable_irq_nosync(IRQ_CONTX); - tx_enabled(port) = 0; - } -} - -static void serial21285_start_tx(struct uart_port *port) -{ - if (!tx_enabled(port)) { - enable_irq(IRQ_CONTX); - tx_enabled(port) = 1; - } -} - -static void serial21285_stop_rx(struct uart_port *port) -{ - if (rx_enabled(port)) { - disable_irq_nosync(IRQ_CONRX); - rx_enabled(port) = 0; - } -} - -static void serial21285_enable_ms(struct uart_port *port) -{ -} - -static irqreturn_t serial21285_rx_chars(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct tty_struct *tty = port->state->port.tty; - unsigned int status, ch, flag, rxs, max_count = 256; - - status = *CSR_UARTFLG; - while (!(status & 0x10) && max_count--) { - ch = *CSR_UARTDR; - flag = TTY_NORMAL; - port->icount.rx++; - - rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ; - if (unlikely(rxs & RXSTAT_ANYERR)) { - if (rxs & RXSTAT_PARITY) - port->icount.parity++; - else if (rxs & RXSTAT_FRAME) - port->icount.frame++; - if (rxs & RXSTAT_OVERRUN) - port->icount.overrun++; - - rxs &= port->read_status_mask; - - if (rxs & RXSTAT_PARITY) - flag = TTY_PARITY; - else if (rxs & RXSTAT_FRAME) - flag = TTY_FRAME; - } - - uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag); - - status = *CSR_UARTFLG; - } - tty_flip_buffer_push(tty); - - return IRQ_HANDLED; -} - -static irqreturn_t serial21285_tx_chars(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct circ_buf *xmit = &port->state->xmit; - int count = 256; - - if (port->x_char) { - *CSR_UARTDR = port->x_char; - port->icount.tx++; - port->x_char = 0; - goto out; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - serial21285_stop_tx(port); - goto out; - } - - do { - *CSR_UARTDR = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0 && !(*CSR_UARTFLG & 0x20)); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - serial21285_stop_tx(port); - - out: - return IRQ_HANDLED; -} - -static unsigned int serial21285_tx_empty(struct uart_port *port) -{ - return (*CSR_UARTFLG & 8) ? 0 : TIOCSER_TEMT; -} - -/* no modem control lines */ -static unsigned int serial21285_get_mctrl(struct uart_port *port) -{ - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; -} - -static void serial21285_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -static void serial21285_break_ctl(struct uart_port *port, int break_state) -{ - unsigned long flags; - unsigned int h_lcr; - - spin_lock_irqsave(&port->lock, flags); - h_lcr = *CSR_H_UBRLCR; - if (break_state) - h_lcr |= H_UBRLCR_BREAK; - else - h_lcr &= ~H_UBRLCR_BREAK; - *CSR_H_UBRLCR = h_lcr; - spin_unlock_irqrestore(&port->lock, flags); -} - -static int serial21285_startup(struct uart_port *port) -{ - int ret; - - tx_enabled(port) = 1; - rx_enabled(port) = 1; - - ret = request_irq(IRQ_CONRX, serial21285_rx_chars, 0, - serial21285_name, port); - if (ret == 0) { - ret = request_irq(IRQ_CONTX, serial21285_tx_chars, 0, - serial21285_name, port); - if (ret) - free_irq(IRQ_CONRX, port); - } - - return ret; -} - -static void serial21285_shutdown(struct uart_port *port) -{ - free_irq(IRQ_CONTX, port); - free_irq(IRQ_CONRX, port); -} - -static void -serial21285_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned long flags; - unsigned int baud, quot, h_lcr, b; - - /* - * We don't support modem control lines. - */ - termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR); - termios->c_cflag |= CLOCAL; - - /* - * We don't support BREAK character recognition. - */ - termios->c_iflag &= ~(IGNBRK | BRKINT); - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - b = port->uartclk / (16 * quot); - tty_termios_encode_baud_rate(termios, b, b); - - switch (termios->c_cflag & CSIZE) { - case CS5: - h_lcr = 0x00; - break; - case CS6: - h_lcr = 0x20; - break; - case CS7: - h_lcr = 0x40; - break; - default: /* CS8 */ - h_lcr = 0x60; - break; - } - - if (termios->c_cflag & CSTOPB) - h_lcr |= H_UBRLCR_STOPB; - if (termios->c_cflag & PARENB) { - h_lcr |= H_UBRLCR_PARENB; - if (!(termios->c_cflag & PARODD)) - h_lcr |= H_UBRLCR_PAREVN; - } - - if (port->fifosize) - h_lcr |= H_UBRLCR_FIFO; - - spin_lock_irqsave(&port->lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * Which character status flags are we interested in? - */ - port->read_status_mask = RXSTAT_OVERRUN; - if (termios->c_iflag & INPCK) - port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; - - /* - * Which character status flags should we ignore? - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; - if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) - port->ignore_status_mask |= RXSTAT_OVERRUN; - - /* - * Ignore all characters if CREAD is not set. - */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= RXSTAT_DUMMY_READ; - - quot -= 1; - - *CSR_UARTCON = 0; - *CSR_L_UBRLCR = quot & 0xff; - *CSR_M_UBRLCR = (quot >> 8) & 0x0f; - *CSR_H_UBRLCR = h_lcr; - *CSR_UARTCON = 1; - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *serial21285_type(struct uart_port *port) -{ - return port->type == PORT_21285 ? "DC21285" : NULL; -} - -static void serial21285_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, 32); -} - -static int serial21285_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, 32, serial21285_name) - != NULL ? 0 : -EBUSY; -} - -static void serial21285_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE && serial21285_request_port(port) == 0) - port->type = PORT_21285; -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int serial21285_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_21285) - ret = -EINVAL; - if (ser->irq != NO_IRQ) - ret = -EINVAL; - if (ser->baud_base != port->uartclk / 16) - ret = -EINVAL; - return ret; -} - -static struct uart_ops serial21285_ops = { - .tx_empty = serial21285_tx_empty, - .get_mctrl = serial21285_get_mctrl, - .set_mctrl = serial21285_set_mctrl, - .stop_tx = serial21285_stop_tx, - .start_tx = serial21285_start_tx, - .stop_rx = serial21285_stop_rx, - .enable_ms = serial21285_enable_ms, - .break_ctl = serial21285_break_ctl, - .startup = serial21285_startup, - .shutdown = serial21285_shutdown, - .set_termios = serial21285_set_termios, - .type = serial21285_type, - .release_port = serial21285_release_port, - .request_port = serial21285_request_port, - .config_port = serial21285_config_port, - .verify_port = serial21285_verify_port, -}; - -static struct uart_port serial21285_port = { - .mapbase = 0x42000160, - .iotype = UPIO_MEM, - .irq = NO_IRQ, - .fifosize = 16, - .ops = &serial21285_ops, - .flags = UPF_BOOT_AUTOCONF, -}; - -static void serial21285_setup_ports(void) -{ - serial21285_port.uartclk = mem_fclk_21285 / 4; -} - -#ifdef CONFIG_SERIAL_21285_CONSOLE -static void serial21285_console_putchar(struct uart_port *port, int ch) -{ - while (*CSR_UARTFLG & 0x20) - barrier(); - *CSR_UARTDR = ch; -} - -static void -serial21285_console_write(struct console *co, const char *s, - unsigned int count) -{ - uart_console_write(&serial21285_port, s, count, serial21285_console_putchar); -} - -static void __init -serial21285_get_options(struct uart_port *port, int *baud, - int *parity, int *bits) -{ - if (*CSR_UARTCON == 1) { - unsigned int tmp; - - tmp = *CSR_H_UBRLCR; - switch (tmp & 0x60) { - case 0x00: - *bits = 5; - break; - case 0x20: - *bits = 6; - break; - case 0x40: - *bits = 7; - break; - default: - case 0x60: - *bits = 8; - break; - } - - if (tmp & H_UBRLCR_PARENB) { - *parity = 'o'; - if (tmp & H_UBRLCR_PAREVN) - *parity = 'e'; - } - - tmp = *CSR_L_UBRLCR | (*CSR_M_UBRLCR << 8); - - *baud = port->uartclk / (16 * (tmp + 1)); - } -} - -static int __init serial21285_console_setup(struct console *co, char *options) -{ - struct uart_port *port = &serial21285_port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (machine_is_personal_server()) - baud = 57600; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - serial21285_get_options(port, &baud, &parity, &bits); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver serial21285_reg; - -static struct console serial21285_console = -{ - .name = SERIAL_21285_NAME, - .write = serial21285_console_write, - .device = uart_console_device, - .setup = serial21285_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &serial21285_reg, -}; - -static int __init rs285_console_init(void) -{ - serial21285_setup_ports(); - register_console(&serial21285_console); - return 0; -} -console_initcall(rs285_console_init); - -#define SERIAL_21285_CONSOLE &serial21285_console -#else -#define SERIAL_21285_CONSOLE NULL -#endif - -static struct uart_driver serial21285_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyFB", - .dev_name = "ttyFB", - .major = SERIAL_21285_MAJOR, - .minor = SERIAL_21285_MINOR, - .nr = 1, - .cons = SERIAL_21285_CONSOLE, -}; - -static int __init serial21285_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: 21285 driver\n"); - - serial21285_setup_ports(); - - ret = uart_register_driver(&serial21285_reg); - if (ret == 0) - uart_add_one_port(&serial21285_reg, &serial21285_port); - - return ret; -} - -static void __exit serial21285_exit(void) -{ - uart_remove_one_port(&serial21285_reg, &serial21285_port); - uart_unregister_driver(&serial21285_reg); -} - -module_init(serial21285_init); -module_exit(serial21285_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver"); -MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR); diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c deleted file mode 100644 index be0ebce36e54..000000000000 --- a/drivers/serial/68328serial.c +++ /dev/null @@ -1,1472 +0,0 @@ -/* 68328serial.c: Serial port driver for 68328 microcontroller - * - * Copyright (C) 1995 David S. Miller - * Copyright (C) 1998 Kenneth Albanowski - * Copyright (C) 1998, 1999 D. Jeff Dionne - * Copyright (C) 1999 Vladimir Gurevich - * Copyright (C) 2002-2003 David McCullough - * Copyright (C) 2002 Greg Ungerer - * - * VZ Support/Fixes Evan Stawnyczy - * Multiple UART support Daniel Potts - * Power management support Daniel Potts - * VZ Second Serial Port enable Phil Wilshire - * 2.4/2.5 port David McCullough - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -/* (es) */ -/* note: perhaps we can murge these files, so that you can just - * define 1 of them, and they can sort that out for themselves - */ -#if defined(CONFIG_M68EZ328) -#include -#else -#if defined(CONFIG_M68VZ328) -#include -#else -#include -#endif /* CONFIG_M68VZ328 */ -#endif /* CONFIG_M68EZ328 */ - -#include "68328serial.h" - -/* Turn off usage of real serial interrupt code, to "support" Copilot */ -#ifdef CONFIG_XCOPILOT_BUGS -#undef USE_INTS -#else -#define USE_INTS -#endif - -static struct m68k_serial m68k_soft[NR_PORTS]; - -static unsigned int uart_irqs[NR_PORTS] = UART_IRQ_DEFNS; - -/* multiple ports are contiguous in memory */ -m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR; - -struct tty_struct m68k_ttys; -struct m68k_serial *m68k_consinfo = 0; - -#define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */ - -struct tty_driver *serial_driver; - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - -/* Debugging... DEBUG_INTR is bad to use when one of the zs - * lines is your console ;( - */ -#undef SERIAL_DEBUG_INTR -#undef SERIAL_DEBUG_OPEN -#undef SERIAL_DEBUG_FLOW - -#define RS_ISR_PASS_LIMIT 256 - -static void change_speed(struct m68k_serial *info); - -/* - * Setup for console. Argument comes from the boot command line. - */ - -/* note: this is messy, but it works, again, perhaps defined somewhere else?*/ -#ifdef CONFIG_M68VZ328 -#define CONSOLE_BAUD_RATE 19200 -#define DEFAULT_CBAUD B19200 -#endif - - -#ifndef CONSOLE_BAUD_RATE -#define CONSOLE_BAUD_RATE 9600 -#define DEFAULT_CBAUD B9600 -#endif - - -static int m68328_console_initted = 0; -static int m68328_console_baud = CONSOLE_BAUD_RATE; -static int m68328_console_cbaud = DEFAULT_CBAUD; - - -static inline int serial_paranoia_check(struct m68k_serial *info, - char *name, const char *routine) -{ -#ifdef SERIAL_PARANOIA_CHECK - static const char *badmagic = - "Warning: bad magic number for serial struct %s in %s\n"; - static const char *badinfo = - "Warning: null m68k_serial for %s in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - if (info->magic != SERIAL_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#endif - return 0; -} - -/* - * This is used to figure out the divisor speeds and the timeouts - */ -static int baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, - 9600, 19200, 38400, 57600, 115200, 0 }; - -/* Sets or clears DTR/RTS on the requested line */ -static inline void m68k_rtsdtr(struct m68k_serial *ss, int set) -{ - if (set) { - /* set the RTS/CTS line */ - } else { - /* clear it */ - } - return; -} - -/* Utility routines */ -static inline int get_baud(struct m68k_serial *ss) -{ - unsigned long result = 115200; - unsigned short int baud = uart_addr[ss->line].ubaud; - if (GET_FIELD(baud, UBAUD_PRESCALER) == 0x38) result = 38400; - result >>= GET_FIELD(baud, UBAUD_DIVIDE); - - return result; -} - -/* - * ------------------------------------------------------------ - * rs_stop() and rs_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - * ------------------------------------------------------------ - */ -static void rs_stop(struct tty_struct *tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - m68328_uart *uart = &uart_addr[info->line]; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_stop")) - return; - - local_irq_save(flags); - uart->ustcnt &= ~USTCNT_TXEN; - local_irq_restore(flags); -} - -static int rs_put_char(char ch) -{ - int flags, loops = 0; - - local_irq_save(flags); - - while (!(UTX & UTX_TX_AVAIL) && (loops < 1000)) { - loops++; - udelay(5); - } - - UTX_TXDATA = ch; - udelay(5); - local_irq_restore(flags); - return 1; -} - -static void rs_start(struct tty_struct *tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - m68328_uart *uart = &uart_addr[info->line]; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_start")) - return; - - local_irq_save(flags); - if (info->xmit_cnt && info->xmit_buf && !(uart->ustcnt & USTCNT_TXEN)) { -#ifdef USE_INTS - uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK; -#else - uart->ustcnt |= USTCNT_TXEN; -#endif - } - local_irq_restore(flags); -} - -/* Drop into either the boot monitor or kadb upon receiving a break - * from keyboard/console input. - */ -static void batten_down_hatches(void) -{ - /* Drop into the debugger */ -} - -static void status_handle(struct m68k_serial *info, unsigned short status) -{ -#if 0 - if(status & DCD) { - if((info->port.tty->termios->c_cflag & CRTSCTS) && - ((info->curregs[3] & AUTO_ENAB)==0)) { - info->curregs[3] |= AUTO_ENAB; - info->pendregs[3] |= AUTO_ENAB; - write_zsreg(info->m68k_channel, 3, info->curregs[3]); - } - } else { - if((info->curregs[3] & AUTO_ENAB)) { - info->curregs[3] &= ~AUTO_ENAB; - info->pendregs[3] &= ~AUTO_ENAB; - write_zsreg(info->m68k_channel, 3, info->curregs[3]); - } - } -#endif - /* If this is console input and this is a - * 'break asserted' status change interrupt - * see if we can drop into the debugger - */ - if((status & URX_BREAK) && info->break_abort) - batten_down_hatches(); - return; -} - -static void receive_chars(struct m68k_serial *info, unsigned short rx) -{ - struct tty_struct *tty = info->port.tty; - m68328_uart *uart = &uart_addr[info->line]; - unsigned char ch, flag; - - /* - * This do { } while() loop will get ALL chars out of Rx FIFO - */ -#ifndef CONFIG_XCOPILOT_BUGS - do { -#endif - ch = GET_FIELD(rx, URX_RXDATA); - - if(info->is_cons) { - if(URX_BREAK & rx) { /* whee, break received */ - status_handle(info, rx); - return; -#ifdef CONFIG_MAGIC_SYSRQ - } else if (ch == 0x10) { /* ^P */ - show_state(); - show_free_areas(); - show_buffers(); -/* show_net_buffers(); */ - return; - } else if (ch == 0x12) { /* ^R */ - emergency_restart(); - return; -#endif /* CONFIG_MAGIC_SYSRQ */ - } - } - - if(!tty) - goto clear_and_exit; - - flag = TTY_NORMAL; - - if(rx & URX_PARITY_ERROR) { - flag = TTY_PARITY; - status_handle(info, rx); - } else if(rx & URX_OVRUN) { - flag = TTY_OVERRUN; - status_handle(info, rx); - } else if(rx & URX_FRAME_ERROR) { - flag = TTY_FRAME; - status_handle(info, rx); - } - tty_insert_flip_char(tty, ch, flag); -#ifndef CONFIG_XCOPILOT_BUGS - } while((rx = uart->urx.w) & URX_DATA_READY); -#endif - - tty_schedule_flip(tty); - -clear_and_exit: - return; -} - -static void transmit_chars(struct m68k_serial *info) -{ - m68328_uart *uart = &uart_addr[info->line]; - - if (info->x_char) { - /* Send next char */ - uart->utx.b.txdata = info->x_char; - info->x_char = 0; - goto clear_and_return; - } - - if((info->xmit_cnt <= 0) || info->port.tty->stopped) { - /* That's peculiar... TX ints off */ - uart->ustcnt &= ~USTCNT_TX_INTR_MASK; - goto clear_and_return; - } - - /* Send char */ - uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); - info->xmit_cnt--; - - if (info->xmit_cnt < WAKEUP_CHARS) - schedule_work(&info->tqueue); - - if(info->xmit_cnt <= 0) { - /* All done for now... TX ints off */ - uart->ustcnt &= ~USTCNT_TX_INTR_MASK; - goto clear_and_return; - } - -clear_and_return: - /* Clear interrupt (should be auto)*/ - return; -} - -/* - * This is the serial driver's generic interrupt routine - */ -irqreturn_t rs_interrupt(int irq, void *dev_id) -{ - struct m68k_serial *info = dev_id; - m68328_uart *uart; - unsigned short rx; - unsigned short tx; - - uart = &uart_addr[info->line]; - rx = uart->urx.w; - -#ifdef USE_INTS - tx = uart->utx.w; - - if (rx & URX_DATA_READY) receive_chars(info, rx); - if (tx & UTX_TX_AVAIL) transmit_chars(info); -#else - receive_chars(info, rx); -#endif - return IRQ_HANDLED; -} - -static void do_softint(struct work_struct *work) -{ - struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue); - struct tty_struct *tty; - - tty = info->port.tty; - if (!tty) - return; -#if 0 - if (clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) { - tty_wakeup(tty); - } -#endif -} - -/* - * This routine is called from the scheduler tqueue when the interrupt - * routine has signalled that a hangup has occurred. The path of - * hangup processing is: - * - * serial interrupt routine -> (scheduler tqueue) -> - * do_serial_hangup() -> tty->hangup() -> rs_hangup() - * - */ -static void do_serial_hangup(struct work_struct *work) -{ - struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue_hangup); - struct tty_struct *tty; - - tty = info->port.tty; - if (!tty) - return; - - tty_hangup(tty); -} - - -static int startup(struct m68k_serial * info) -{ - m68328_uart *uart = &uart_addr[info->line]; - unsigned long flags; - - if (info->flags & S_INITIALIZED) - return 0; - - if (!info->xmit_buf) { - info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL); - if (!info->xmit_buf) - return -ENOMEM; - } - - local_irq_save(flags); - - /* - * Clear the FIFO buffers and disable them - * (they will be reenabled in change_speed()) - */ - - uart->ustcnt = USTCNT_UEN; - info->xmit_fifo_size = 1; - uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN; - (void)uart->urx.w; - - /* - * Finally, enable sequencing and interrupts - */ -#ifdef USE_INTS - uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | - USTCNT_RX_INTR_MASK | USTCNT_TX_INTR_MASK; -#else - uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK; -#endif - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - - /* - * and set the speed of the serial port - */ - - change_speed(info); - - info->flags |= S_INITIALIZED; - local_irq_restore(flags); - return 0; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void shutdown(struct m68k_serial * info) -{ - m68328_uart *uart = &uart_addr[info->line]; - unsigned long flags; - - uart->ustcnt = 0; /* All off! */ - if (!(info->flags & S_INITIALIZED)) - return; - - local_irq_save(flags); - - if (info->xmit_buf) { - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = 0; - } - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->flags &= ~S_INITIALIZED; - local_irq_restore(flags); -} - -struct { - int divisor, prescale; -} -#ifndef CONFIG_M68VZ328 - hw_baud_table[18] = { - {0,0}, /* 0 */ - {0,0}, /* 50 */ - {0,0}, /* 75 */ - {0,0}, /* 110 */ - {0,0}, /* 134 */ - {0,0}, /* 150 */ - {0,0}, /* 200 */ - {7,0x26}, /* 300 */ - {6,0x26}, /* 600 */ - {5,0x26}, /* 1200 */ - {0,0}, /* 1800 */ - {4,0x26}, /* 2400 */ - {3,0x26}, /* 4800 */ - {2,0x26}, /* 9600 */ - {1,0x26}, /* 19200 */ - {0,0x26}, /* 38400 */ - {1,0x38}, /* 57600 */ - {0,0x38}, /* 115200 */ -}; -#else - hw_baud_table[18] = { - {0,0}, /* 0 */ - {0,0}, /* 50 */ - {0,0}, /* 75 */ - {0,0}, /* 110 */ - {0,0}, /* 134 */ - {0,0}, /* 150 */ - {0,0}, /* 200 */ - {0,0}, /* 300 */ - {7,0x26}, /* 600 */ - {6,0x26}, /* 1200 */ - {0,0}, /* 1800 */ - {5,0x26}, /* 2400 */ - {4,0x26}, /* 4800 */ - {3,0x26}, /* 9600 */ - {2,0x26}, /* 19200 */ - {1,0x26}, /* 38400 */ - {0,0x26}, /* 57600 */ - {1,0x38}, /* 115200 */ -}; -#endif -/* rate = 1036800 / ((65 - prescale) * (1<line]; - unsigned short port; - unsigned short ustcnt; - unsigned cflag; - int i; - - if (!info->port.tty || !info->port.tty->termios) - return; - cflag = info->port.tty->termios->c_cflag; - if (!(port = info->port)) - return; - - ustcnt = uart->ustcnt; - uart->ustcnt = ustcnt & ~USTCNT_TXEN; - - i = cflag & CBAUD; - if (i & CBAUDEX) { - i = (i & ~CBAUDEX) + B38400; - } - - info->baud = baud_table[i]; - uart->ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) | - PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale); - - ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7); - - if ((cflag & CSIZE) == CS8) - ustcnt |= USTCNT_8_7; - - if (cflag & CSTOPB) - ustcnt |= USTCNT_STOP; - - if (cflag & PARENB) - ustcnt |= USTCNT_PARITYEN; - if (cflag & PARODD) - ustcnt |= USTCNT_ODD_EVEN; - -#ifdef CONFIG_SERIAL_68328_RTS_CTS - if (cflag & CRTSCTS) { - uart->utx.w &= ~ UTX_NOCTS; - } else { - uart->utx.w |= UTX_NOCTS; - } -#endif - - ustcnt |= USTCNT_TXEN; - - uart->ustcnt = ustcnt; - return; -} - -/* - * Fair output driver allows a process to speak. - */ -static void rs_fair_output(void) -{ - int left; /* Output no more than that */ - unsigned long flags; - struct m68k_serial *info = &m68k_soft[0]; - char c; - - if (info == 0) return; - if (info->xmit_buf == 0) return; - - local_irq_save(flags); - left = info->xmit_cnt; - while (left != 0) { - c = info->xmit_buf[info->xmit_tail]; - info->xmit_tail = (info->xmit_tail+1) & (SERIAL_XMIT_SIZE-1); - info->xmit_cnt--; - local_irq_restore(flags); - - rs_put_char(c); - - local_irq_save(flags); - left = min(info->xmit_cnt, left-1); - } - - /* Last character is being transmitted now (hopefully). */ - udelay(5); - - local_irq_restore(flags); - return; -} - -/* - * m68k_console_print is registered for printk. - */ -void console_print_68328(const char *p) -{ - char c; - - while((c=*(p++)) != 0) { - if(c == '\n') - rs_put_char('\r'); - rs_put_char(c); - } - - /* Comment this if you want to have a strict interrupt-driven output */ - rs_fair_output(); - - return; -} - -static void rs_set_ldisc(struct tty_struct *tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_set_ldisc")) - return; - - info->is_cons = (tty->termios->c_line == N_TTY); - - printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" : "off"); -} - -static void rs_flush_chars(struct tty_struct *tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - m68328_uart *uart = &uart_addr[info->line]; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) - return; -#ifndef USE_INTS - for(;;) { -#endif - - /* Enable transmitter */ - local_irq_save(flags); - - if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || - !info->xmit_buf) { - local_irq_restore(flags); - return; - } - -#ifdef USE_INTS - uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK; -#else - uart->ustcnt |= USTCNT_TXEN; -#endif - -#ifdef USE_INTS - if (uart->utx.w & UTX_TX_AVAIL) { -#else - if (1) { -#endif - /* Send char */ - uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); - info->xmit_cnt--; - } - -#ifndef USE_INTS - while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5); - } -#endif - local_irq_restore(flags); -} - -extern void console_printn(const char * b, int count); - -static int rs_write(struct tty_struct * tty, - const unsigned char *buf, int count) -{ - int c, total = 0; - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - m68328_uart *uart = &uart_addr[info->line]; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_write")) - return 0; - - if (!tty || !info->xmit_buf) - return 0; - - local_save_flags(flags); - while (1) { - local_irq_disable(); - c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, - SERIAL_XMIT_SIZE - info->xmit_head)); - local_irq_restore(flags); - - if (c <= 0) - break; - - memcpy(info->xmit_buf + info->xmit_head, buf, c); - - local_irq_disable(); - info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1); - info->xmit_cnt += c; - local_irq_restore(flags); - buf += c; - count -= c; - total += c; - } - - if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { - /* Enable transmitter */ - local_irq_disable(); -#ifndef USE_INTS - while(info->xmit_cnt) { -#endif - - uart->ustcnt |= USTCNT_TXEN; -#ifdef USE_INTS - uart->ustcnt |= USTCNT_TX_INTR_MASK; -#else - while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5); -#endif - if (uart->utx.w & UTX_TX_AVAIL) { - uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; - info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); - info->xmit_cnt--; - } - -#ifndef USE_INTS - } -#endif - local_irq_restore(flags); - } - - return total; -} - -static int rs_write_room(struct tty_struct *tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - int ret; - - if (serial_paranoia_check(info, tty->name, "rs_write_room")) - return 0; - ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - return ret; -} - -static int rs_chars_in_buffer(struct tty_struct *tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) - return 0; - return info->xmit_cnt; -} - -static void rs_flush_buffer(struct tty_struct *tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) - return; - local_irq_save(flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - local_irq_restore(flags); - tty_wakeup(tty); -} - -/* - * ------------------------------------------------------------ - * rs_throttle() - * - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - * ------------------------------------------------------------ - */ -static void rs_throttle(struct tty_struct * tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_throttle")) - return; - - if (I_IXOFF(tty)) - info->x_char = STOP_CHAR(tty); - - /* Turn off RTS line (do this atomic) */ -} - -static void rs_unthrottle(struct tty_struct * tty) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) - return; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - info->x_char = START_CHAR(tty); - } - - /* Assert RTS line (do this atomic) */ -} - -/* - * ------------------------------------------------------------ - * rs_ioctl() and friends - * ------------------------------------------------------------ - */ - -static int get_serial_info(struct m68k_serial * info, - struct serial_struct * retinfo) -{ - struct serial_struct tmp; - - if (!retinfo) - return -EFAULT; - memset(&tmp, 0, sizeof(tmp)); - tmp.type = info->type; - tmp.line = info->line; - tmp.port = info->port; - tmp.irq = info->irq; - tmp.flags = info->flags; - tmp.baud_base = info->baud_base; - tmp.close_delay = info->close_delay; - tmp.closing_wait = info->closing_wait; - tmp.custom_divisor = info->custom_divisor; - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - - return 0; -} - -static int set_serial_info(struct m68k_serial * info, - struct serial_struct * new_info) -{ - struct serial_struct new_serial; - struct m68k_serial old_info; - int retval = 0; - - if (!new_info) - return -EFAULT; - if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; - old_info = *info; - - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.baud_base != info->baud_base) || - (new_serial.type != info->type) || - (new_serial.close_delay != info->close_delay) || - ((new_serial.flags & ~S_USR_MASK) != - (info->flags & ~S_USR_MASK))) - return -EPERM; - info->flags = ((info->flags & ~S_USR_MASK) | - (new_serial.flags & S_USR_MASK)); - info->custom_divisor = new_serial.custom_divisor; - goto check_and_exit; - } - - if (info->count > 1) - return -EBUSY; - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - - info->baud_base = new_serial.baud_base; - info->flags = ((info->flags & ~S_FLAGS) | - (new_serial.flags & S_FLAGS)); - info->type = new_serial.type; - info->close_delay = new_serial.close_delay; - info->closing_wait = new_serial.closing_wait; - -check_and_exit: - retval = startup(info); - return retval; -} - -/* - * get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int get_lsr_info(struct m68k_serial * info, unsigned int *value) -{ -#ifdef CONFIG_SERIAL_68328_RTS_CTS - m68328_uart *uart = &uart_addr[info->line]; -#endif - unsigned char status; - unsigned long flags; - - local_irq_save(flags); -#ifdef CONFIG_SERIAL_68328_RTS_CTS - status = (uart->utx.w & UTX_CTS_STAT) ? 1 : 0; -#else - status = 0; -#endif - local_irq_restore(flags); - return put_user(status, value); -} - -/* - * This routine sends a break character out the serial port. - */ -static void send_break(struct m68k_serial * info, unsigned int duration) -{ - m68328_uart *uart = &uart_addr[info->line]; - unsigned long flags; - if (!info->port) - return; - local_irq_save(flags); -#ifdef USE_INTS - uart->utx.w |= UTX_SEND_BREAK; - msleep_interruptible(duration); - uart->utx.w &= ~UTX_SEND_BREAK; -#endif - local_irq_restore(flags); -} - -static int rs_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) -{ - int error; - struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; - int retval; - - if (serial_paranoia_check(info, tty->name, "rs_ioctl")) - return -ENODEV; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && - (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case TCSBRK: /* SVID version: non-zero arg --> no break */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - if (!arg) - send_break(info, 250); /* 1/4 second */ - return 0; - case TCSBRKP: /* support for POSIX tcsendbreak() */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - send_break(info, arg ? arg*(100) : 250); - return 0; - case TIOCGSERIAL: - return get_serial_info(info, - (struct serial_struct *) arg); - case TIOCSSERIAL: - return set_serial_info(info, - (struct serial_struct *) arg); - case TIOCSERGETLSR: /* Get line status register */ - return get_lsr_info(info, (unsigned int *) arg); - case TIOCSERGSTRUCT: - if (copy_to_user((struct m68k_serial *) arg, - info, sizeof(struct m68k_serial))) - return -EFAULT; - return 0; - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; - - change_speed(info); - - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - rs_start(tty); - } - -} - -/* - * ------------------------------------------------------------ - * rs_close() - * - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * S structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - * ------------------------------------------------------------ - */ -static void rs_close(struct tty_struct *tty, struct file * filp) -{ - struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; - m68328_uart *uart = &uart_addr[info->line]; - unsigned long flags; - - if (!info || serial_paranoia_check(info, tty->name, "rs_close")) - return; - - local_irq_save(flags); - - if (tty_hung_up_p(filp)) { - local_irq_restore(flags); - return; - } - - if ((tty->count == 1) && (info->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk("rs_close: bad serial port count; tty->count is 1, " - "info->count is %d\n", info->count); - info->count = 1; - } - if (--info->count < 0) { - printk("rs_close: bad serial port count for ttyS%d: %d\n", - info->line, info->count); - info->count = 0; - } - if (info->count) { - local_irq_restore(flags); - return; - } - info->flags |= S_CLOSING; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->closing_wait != S_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - - uart->ustcnt &= ~USTCNT_RXEN; - uart->ustcnt &= ~(USTCNT_RXEN | USTCNT_RX_INTR_MASK); - - shutdown(info); - rs_flush_buffer(tty); - - tty_ldisc_flush(tty); - tty->closing = 0; - info->event = 0; - info->port.tty = NULL; -#warning "This is not and has never been valid so fix it" -#if 0 - if (tty->ldisc.num != ldiscs[N_TTY].num) { - if (tty->ldisc.close) - (tty->ldisc.close)(tty); - tty->ldisc = ldiscs[N_TTY]; - tty->termios->c_line = N_TTY; - if (tty->ldisc.open) - (tty->ldisc.open)(tty); - } -#endif - if (info->blocked_open) { - if (info->close_delay) { - msleep_interruptible(jiffies_to_msecs(info->close_delay)); - } - wake_up_interruptible(&info->open_wait); - } - info->flags &= ~(S_NORMAL_ACTIVE|S_CLOSING); - wake_up_interruptible(&info->close_wait); - local_irq_restore(flags); -} - -/* - * rs_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -void rs_hangup(struct tty_struct *tty) -{ - struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_hangup")) - return; - - rs_flush_buffer(tty); - shutdown(info); - info->event = 0; - info->count = 0; - info->flags &= ~S_NORMAL_ACTIVE; - info->port.tty = NULL; - wake_up_interruptible(&info->open_wait); -} - -/* - * ------------------------------------------------------------ - * rs_open() and friends - * ------------------------------------------------------------ - */ -static int block_til_ready(struct tty_struct *tty, struct file * filp, - struct m68k_serial *info) -{ - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (info->flags & S_CLOSING) { - interruptible_sleep_on(&info->close_wait); -#ifdef SERIAL_DO_RESTART - if (info->flags & S_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; -#else - return -EAGAIN; -#endif - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= S_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->open_wait, &wait); - - info->count--; - info->blocked_open++; - while (1) { - local_irq_disable(); - m68k_rtsdtr(info, 1); - local_irq_enable(); - current->state = TASK_INTERRUPTIBLE; - if (tty_hung_up_p(filp) || - !(info->flags & S_INITIALIZED)) { -#ifdef SERIAL_DO_RESTART - if (info->flags & S_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; -#else - retval = -EAGAIN; -#endif - break; - } - if (!(info->flags & S_CLOSING) && do_clocal) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - tty_unlock(); - schedule(); - tty_lock(); - } - current->state = TASK_RUNNING; - remove_wait_queue(&info->open_wait, &wait); - if (!tty_hung_up_p(filp)) - info->count++; - info->blocked_open--; - - if (retval) - return retval; - info->flags |= S_NORMAL_ACTIVE; - return 0; -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its S structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -int rs_open(struct tty_struct *tty, struct file * filp) -{ - struct m68k_serial *info; - int retval, line; - - line = tty->index; - - if (line >= NR_PORTS || line < 0) /* we have exactly one */ - return -ENODEV; - - info = &m68k_soft[line]; - - if (serial_paranoia_check(info, tty->name, "rs_open")) - return -ENODEV; - - info->count++; - tty->driver_data = info; - info->port.tty = tty; - - /* - * Start up serial port - */ - retval = startup(info); - if (retval) - return retval; - - return block_til_ready(tty, filp, info); -} - -/* Finally, routines used to initialize the serial driver. */ - -static void show_serial_version(void) -{ - printk("MC68328 serial driver version 1.00\n"); -} - -static const struct tty_operations rs_ops = { - .open = rs_open, - .close = rs_close, - .write = rs_write, - .flush_chars = rs_flush_chars, - .write_room = rs_write_room, - .chars_in_buffer = rs_chars_in_buffer, - .flush_buffer = rs_flush_buffer, - .ioctl = rs_ioctl, - .throttle = rs_throttle, - .unthrottle = rs_unthrottle, - .set_termios = rs_set_termios, - .stop = rs_stop, - .start = rs_start, - .hangup = rs_hangup, - .set_ldisc = rs_set_ldisc, -}; - -/* rs_init inits the driver */ -static int __init -rs68328_init(void) -{ - int flags, i; - struct m68k_serial *info; - - serial_driver = alloc_tty_driver(NR_PORTS); - if (!serial_driver) - return -ENOMEM; - - show_serial_version(); - - /* Initialize the tty_driver structure */ - /* SPARC: Not all of this is exactly right for us. */ - - serial_driver->name = "ttyS"; - serial_driver->major = TTY_MAJOR; - serial_driver->minor_start = 64; - serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - serial_driver->subtype = SERIAL_TYPE_NORMAL; - serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = - m68328_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(serial_driver, &rs_ops); - - if (tty_register_driver(serial_driver)) { - put_tty_driver(serial_driver); - printk(KERN_ERR "Couldn't register serial driver\n"); - return -ENOMEM; - } - - local_irq_save(flags); - - for(i=0;imagic = SERIAL_MAGIC; - info->port = (int) &uart_addr[i]; - info->port.tty = NULL; - info->irq = uart_irqs[i]; - info->custom_divisor = 16; - info->close_delay = 50; - info->closing_wait = 3000; - info->x_char = 0; - info->event = 0; - info->count = 0; - info->blocked_open = 0; - INIT_WORK(&info->tqueue, do_softint); - INIT_WORK(&info->tqueue_hangup, do_serial_hangup); - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - info->line = i; - info->is_cons = 1; /* Means shortcuts work */ - - printk("%s%d at 0x%08x (irq = %d)", serial_driver->name, info->line, - info->port, info->irq); - printk(" is a builtin MC68328 UART\n"); - -#ifdef CONFIG_M68VZ328 - if (i > 0 ) - PJSEL &= 0xCF; /* PSW enable second port output */ -#endif - - if (request_irq(uart_irqs[i], - rs_interrupt, - IRQF_DISABLED, - "M68328_UART", info)) - panic("Unable to attach 68328 serial interrupt\n"); - } - local_irq_restore(flags); - return 0; -} - -module_init(rs68328_init); - - - -static void m68328_set_baud(void) -{ - unsigned short ustcnt; - int i; - - ustcnt = USTCNT; - USTCNT = ustcnt & ~USTCNT_TXEN; - -again: - for (i = 0; i < ARRAY_SIZE(baud_table); i++) - if (baud_table[i] == m68328_console_baud) - break; - if (i >= ARRAY_SIZE(baud_table)) { - m68328_console_baud = 9600; - goto again; - } - - UBAUD = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) | - PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale); - ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7); - ustcnt |= USTCNT_8_7; - ustcnt |= USTCNT_TXEN; - USTCNT = ustcnt; - m68328_console_initted = 1; - return; -} - - -int m68328_console_setup(struct console *cp, char *arg) -{ - int i, n = CONSOLE_BAUD_RATE; - - if (!cp) - return(-1); - - if (arg) - n = simple_strtoul(arg,NULL,0); - - for (i = 0; i < ARRAY_SIZE(baud_table); i++) - if (baud_table[i] == n) - break; - if (i < ARRAY_SIZE(baud_table)) { - m68328_console_baud = n; - m68328_console_cbaud = 0; - if (i > 15) { - m68328_console_cbaud |= CBAUDEX; - i -= 15; - } - m68328_console_cbaud |= i; - } - - m68328_set_baud(); /* make sure baud rate changes */ - return(0); -} - - -static struct tty_driver *m68328_console_device(struct console *c, int *index) -{ - *index = c->index; - return serial_driver; -} - - -void m68328_console_write (struct console *co, const char *str, - unsigned int count) -{ - if (!m68328_console_initted) - m68328_set_baud(); - while (count--) { - if (*str == '\n') - rs_put_char('\r'); - rs_put_char( *str++ ); - } -} - - -static struct console m68328_driver = { - .name = "ttyS", - .write = m68328_console_write, - .device = m68328_console_device, - .setup = m68328_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - - -static int __init m68328_console_init(void) -{ - register_console(&m68328_driver); - return 0; -} - -console_initcall(m68328_console_init); diff --git a/drivers/serial/68328serial.h b/drivers/serial/68328serial.h deleted file mode 100644 index 664ceb0a158c..000000000000 --- a/drivers/serial/68328serial.h +++ /dev/null @@ -1,188 +0,0 @@ -/* 68328serial.h: Definitions for the mc68328 serial driver. - * - * Copyright (C) 1995 David S. Miller - * Copyright (C) 1998 Kenneth Albanowski - * Copyright (C) 1998, 1999 D. Jeff Dionne - * Copyright (C) 1999 Vladimir Gurevich - * - * VZ Support/Fixes Evan Stawnyczy - */ - -#ifndef _MC683XX_SERIAL_H -#define _MC683XX_SERIAL_H - - -struct serial_struct { - int type; - int line; - int port; - int irq; - int flags; - int xmit_fifo_size; - int custom_divisor; - int baud_base; - unsigned short close_delay; - char reserved_char[2]; - int hub6; /* FIXME: We don't have AT&T Hub6 boards! */ - unsigned short closing_wait; /* time to wait before closing */ - unsigned short closing_wait2; /* no longer used... */ - int reserved[4]; -}; - -/* - * For the close wait times, 0 means wait forever for serial port to - * flush its output. 65535 means don't wait at all. - */ -#define S_CLOSING_WAIT_INF 0 -#define S_CLOSING_WAIT_NONE 65535 - -/* - * Definitions for S_struct (and serial_struct) flags field - */ -#define S_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes - on the callout port */ -#define S_FOURPORT 0x0002 /* Set OU1, OUT2 per AST Fourport settings */ -#define S_SAK 0x0004 /* Secure Attention Key (Orange book) */ -#define S_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */ - -#define S_SPD_MASK 0x0030 -#define S_SPD_HI 0x0010 /* Use 56000 instead of 38400 bps */ - -#define S_SPD_VHI 0x0020 /* Use 115200 instead of 38400 bps */ -#define S_SPD_CUST 0x0030 /* Use user-specified divisor */ - -#define S_SKIP_TEST 0x0040 /* Skip UART test during autoconfiguration */ -#define S_AUTO_IRQ 0x0080 /* Do automatic IRQ during autoconfiguration */ -#define S_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */ -#define S_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */ -#define S_CALLOUT_NOHUP 0x0400 /* Don't do hangups for cua device */ - -#define S_FLAGS 0x0FFF /* Possible legal S flags */ -#define S_USR_MASK 0x0430 /* Legal flags that non-privileged - * users can set or reset */ - -/* Internal flags used only by kernel/chr_drv/serial.c */ -#define S_INITIALIZED 0x80000000 /* Serial port was initialized */ -#define S_CALLOUT_ACTIVE 0x40000000 /* Call out device is active */ -#define S_NORMAL_ACTIVE 0x20000000 /* Normal device is active */ -#define S_BOOT_AUTOCONF 0x10000000 /* Autoconfigure port on bootup */ -#define S_CLOSING 0x08000000 /* Serial port is closing */ -#define S_CTS_FLOW 0x04000000 /* Do CTS flow control */ -#define S_CHECK_CD 0x02000000 /* i.e., CLOCAL */ - -/* Software state per channel */ - -#ifdef __KERNEL__ - -/* - * I believe this is the optimal setting that reduces the number of interrupts. - * At high speeds the output might become a little "bursted" (use USTCNT_TXHE - * if that bothers you), but in most cases it will not, since we try to - * transmit characters every time rs_interrupt is called. Thus, quite often - * you'll see that a receive interrupt occures before the transmit one. - * -- Vladimir Gurevich - */ -#define USTCNT_TX_INTR_MASK (USTCNT_TXEE) - -/* - * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special - * "Old data interrupt" which occures whenever the data stay in the FIFO - * longer than 30 bits time. This allows us to use FIFO without compromising - * latency. '328 does not have this feature and without the real 328-based - * board I would assume that RXRE is the safest setting. - * - * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of - * interrupts. RXFE (receive queue full) causes the system to lose data - * at least at 115200 baud - * - * If your board is busy doing other stuff, you might consider to use - * RXRE (data ready intrrupt) instead. - * - * The other option is to make these INTR masks run-time configurable, so - * that people can dynamically adapt them according to the current usage. - * -- Vladimir Gurevich - */ - -/* (es) */ -#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328) -#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN) -#elif defined(CONFIG_M68328) -#define USTCNT_RX_INTR_MASK (USTCNT_RXRE) -#else -#error Please, define the Rx interrupt events for your CPU -#endif -/* (/es) */ - -/* - * This is our internal structure for each serial port's state. - * - * Many fields are paralleled by the structure used by the serial_struct - * structure. - * - * For definitions of the flags field, see tty.h - */ - -struct m68k_serial { - char soft_carrier; /* Use soft carrier on this channel */ - char break_abort; /* Is serial console in, so process brk/abrt */ - char is_cons; /* Is this our console. */ - - /* We need to know the current clock divisor - * to read the bps rate the chip has currently - * loaded. - */ - unsigned char clk_divisor; /* May be 1, 16, 32, or 64 */ - int baud; - int magic; - int baud_base; - int port; - int irq; - int flags; /* defined in tty.h */ - int type; /* UART type */ - struct tty_struct *tty; - int read_status_mask; - int ignore_status_mask; - int timeout; - int xmit_fifo_size; - int custom_divisor; - int x_char; /* xon/xoff character */ - int close_delay; - unsigned short closing_wait; - unsigned short closing_wait2; - unsigned long event; - unsigned long last_active; - int line; - int count; /* # of fd on device */ - int blocked_open; /* # of blocked opens */ - unsigned char *xmit_buf; - int xmit_head; - int xmit_tail; - int xmit_cnt; - struct work_struct tqueue; - struct work_struct tqueue_hangup; - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; -}; - - -#define SERIAL_MAGIC 0x5301 - -/* - * The size of the serial xmit buffer is 1 page, or 4096 bytes - */ -#define SERIAL_XMIT_SIZE 4096 - -/* - * Events are used to schedule things to happen at timer-interrupt - * time, instead of at rs interrupt time. - */ -#define RS_EVENT_WRITE_WAKEUP 0 - -/* - * Define the number of ports supported and their irqs. - */ -#define NR_PORTS 1 -#define UART_IRQ_DEFNS {UART_IRQ_NUM} - -#endif /* __KERNEL__ */ -#endif /* !(_MC683XX_SERIAL_H) */ diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c deleted file mode 100644 index 88b13356ec10..000000000000 --- a/drivers/serial/68360serial.c +++ /dev/null @@ -1,2978 +0,0 @@ -/* - * UART driver for 68360 CPM SCC or SMC - * Copyright (c) 2000 D. Jeff Dionne , - * Copyright (c) 2000 Michael Leslie - * Copyright (c) 1997 Dan Malek - * - * I used the serial.c driver as the framework for this driver. - * Give credit to those guys. - * The original code was written for the MBX860 board. I tried to make - * it generic, but there may be some assumptions in the structures that - * have to be fixed later. - * To save porting time, I did not bother to change any object names - * that are not accessed outside of this file. - * It still needs lots of work........When it was easy, I included code - * to support the SCCs, but this has never been tested, nor is it complete. - * Only the SCCs support modem control, so that is not complete either. - * - * This module exports the following rs232 io functions: - * - * int rs_360_init(void); - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -#ifdef CONFIG_KGDB -extern void breakpoint(void); -extern void set_debug_traps(void); -extern int kgdb_output_string (const char* s, unsigned int count); -#endif - - -/* #ifdef CONFIG_SERIAL_CONSOLE */ /* This seems to be a post 2.0 thing - mles */ -#include -#include - -/* this defines the index into rs_table for the port to use - */ -#ifndef CONFIG_SERIAL_CONSOLE_PORT -#define CONFIG_SERIAL_CONSOLE_PORT 1 /* ie SMC2 - note USE_SMC2 must be defined */ -#endif -/* #endif */ - -#if 0 -/* SCC2 for console - */ -#undef CONFIG_SERIAL_CONSOLE_PORT -#define CONFIG_SERIAL_CONSOLE_PORT 2 -#endif - - -#define TX_WAKEUP ASYNC_SHARE_IRQ - -static char *serial_name = "CPM UART driver"; -static char *serial_version = "0.03"; - -static struct tty_driver *serial_driver; -int serial_console_setup(struct console *co, char *options); - -/* - * Serial driver configuration section. Here are the various options: - */ -#define SERIAL_PARANOIA_CHECK -#define CONFIG_SERIAL_NOPAUSE_IO -#define SERIAL_DO_RESTART - -/* Set of debugging defines */ - -#undef SERIAL_DEBUG_INTR -#undef SERIAL_DEBUG_OPEN -#undef SERIAL_DEBUG_FLOW -#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - -#define _INLINE_ inline - -#define DBG_CNT(s) - -/* We overload some of the items in the data structure to meet our - * needs. For example, the port address is the CPM parameter ram - * offset for the SCC or SMC. The maximum number of ports is 4 SCCs and - * 2 SMCs. The "hub6" field is used to indicate the channel number, with - * a flag indicating SCC or SMC, and the number is used as an index into - * the CPM parameter area for this device. - * The "type" field is currently set to 0, for PORT_UNKNOWN. It is - * not currently used. I should probably use it to indicate the port - * type of SMC or SCC. - * The SMCs do not support any modem control signals. - */ -#define smc_scc_num hub6 -#define NUM_IS_SCC ((int)0x00010000) -#define PORT_NUM(P) ((P) & 0x0000ffff) - - -#if defined (CONFIG_UCQUICC) - -volatile extern void *_periph_base; -/* sipex transceiver - * mode bits for are on pins - * - * SCC2 d16..19 - * SCC3 d20..23 - * SCC4 d24..27 - */ -#define SIPEX_MODE(n,m) ((m & 0x0f)<<(16+4*(n-1))) - -static uint sipex_mode_bits = 0x00000000; - -#endif - -/* There is no `serial_state' defined back here in 2.0. - * Try to get by with serial_struct - */ -/* #define serial_state serial_struct */ - -/* 2.4 -> 2.0 portability problem: async_icount in 2.4 has a few - * extras: */ - -#if 0 -struct async_icount_24 { - __u32 cts, dsr, rng, dcd, tx, rx; - __u32 frame, parity, overrun, brk; - __u32 buf_overrun; -} icount; -#endif - -#if 0 - -struct serial_state { - int magic; - int baud_base; - unsigned long port; - int irq; - int flags; - int hub6; - int type; - int line; - int revision; /* Chip revision (950) */ - int xmit_fifo_size; - int custom_divisor; - int count; - u8 *iomem_base; - u16 iomem_reg_shift; - unsigned short close_delay; - unsigned short closing_wait; /* time to wait before closing */ - struct async_icount_24 icount; - int io_type; - struct async_struct *info; -}; -#endif - -#define SSTATE_MAGIC 0x5302 - - - -/* SMC2 is sometimes used for low performance TDM interfaces. Define - * this as 1 if you want SMC2 as a serial port UART managed by this driver. - * Define this as 0 if you wish to use SMC2 for something else. - */ -#define USE_SMC2 1 - -#if 0 -/* Define SCC to ttySx mapping. */ -#define SCC_NUM_BASE (USE_SMC2 + 1) /* SCC base tty "number" */ - -/* Define which SCC is the first one to use for a serial port. These - * are 0-based numbers, i.e. this assumes the first SCC (SCC1) is used - * for Ethernet, and the first available SCC for serial UART is SCC2. - * NOTE: IF YOU CHANGE THIS, you have to change the PROFF_xxx and - * interrupt vectors in the table below to match. - */ -#define SCC_IDX_BASE 1 /* table index */ -#endif - - -/* Processors other than the 860 only get SMCs configured by default. - * Either they don't have SCCs or they are allocated somewhere else. - * Of course, there are now 860s without some SCCs, so we will need to - * address that someday. - * The Embedded Planet Multimedia I/O cards use TDM interfaces to the - * stereo codec parts, and we use SMC2 to help support that. - */ -static struct serial_state rs_table[] = { -/* type line PORT IRQ FLAGS smc_scc_num (F.K.A. hub6) */ - { 0, 0, PRSLOT_SMC1, CPMVEC_SMC1, 0, 0 } /* SMC1 ttyS0 */ -#if USE_SMC2 - ,{ 0, 0, PRSLOT_SMC2, CPMVEC_SMC2, 0, 1 } /* SMC2 ttyS1 */ -#endif - -#if defined(CONFIG_SERIAL_68360_SCC) - ,{ 0, 0, PRSLOT_SCC2, CPMVEC_SCC2, 0, (NUM_IS_SCC | 1) } /* SCC2 ttyS2 */ - ,{ 0, 0, PRSLOT_SCC3, CPMVEC_SCC3, 0, (NUM_IS_SCC | 2) } /* SCC3 ttyS3 */ - ,{ 0, 0, PRSLOT_SCC4, CPMVEC_SCC4, 0, (NUM_IS_SCC | 3) } /* SCC4 ttyS4 */ -#endif -}; - -#define NR_PORTS (sizeof(rs_table)/sizeof(struct serial_state)) - -/* The number of buffer descriptors and their sizes. - */ -#define RX_NUM_FIFO 4 -#define RX_BUF_SIZE 32 -#define TX_NUM_FIFO 4 -#define TX_BUF_SIZE 32 - -#define CONSOLE_NUM_FIFO 2 -#define CONSOLE_BUF_SIZE 4 - -char *console_fifos[CONSOLE_NUM_FIFO * CONSOLE_BUF_SIZE]; - -/* The async_struct in serial.h does not really give us what we - * need, so define our own here. - */ -typedef struct serial_info { - int magic; - int flags; - - struct serial_state *state; - /* struct serial_struct *state; */ - /* struct async_struct *state; */ - - struct tty_struct *tty; - int read_status_mask; - int ignore_status_mask; - int timeout; - int line; - int x_char; /* xon/xoff character */ - int close_delay; - unsigned short closing_wait; - unsigned short closing_wait2; - unsigned long event; - unsigned long last_active; - int blocked_open; /* # of blocked opens */ - struct work_struct tqueue; - struct work_struct tqueue_hangup; - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - - -/* CPM Buffer Descriptor pointers. - */ - QUICC_BD *rx_bd_base; - QUICC_BD *rx_cur; - QUICC_BD *tx_bd_base; - QUICC_BD *tx_cur; -} ser_info_t; - - -/* since kmalloc_init() does not get called until much after this initialization: */ -static ser_info_t quicc_ser_info[NR_PORTS]; -static char rx_buf_pool[NR_PORTS * RX_NUM_FIFO * RX_BUF_SIZE]; -static char tx_buf_pool[NR_PORTS * TX_NUM_FIFO * TX_BUF_SIZE]; - -static void change_speed(ser_info_t *info); -static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout); - -static inline int serial_paranoia_check(ser_info_t *info, - char *name, const char *routine) -{ -#ifdef SERIAL_PARANOIA_CHECK - static const char *badmagic = - "Warning: bad magic number for serial struct (%s) in %s\n"; - static const char *badinfo = - "Warning: null async_struct for (%s) in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - if (info->magic != SERIAL_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#endif - return 0; -} - -/* - * This is used to figure out the divisor speeds and the timeouts, - * indexed by the termio value. The generic CPM functions are responsible - * for setting and assigning baud rate generators for us. - */ -static int baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, - 9600, 19200, 38400, 57600, 115200, 230400, 460800, 0 }; - -/* This sucks. There is a better way: */ -#if defined(CONFIG_CONSOLE_9600) - #define CONSOLE_BAUDRATE 9600 -#elif defined(CONFIG_CONSOLE_19200) - #define CONSOLE_BAUDRATE 19200 -#elif defined(CONFIG_CONSOLE_115200) - #define CONSOLE_BAUDRATE 115200 -#else - #warning "console baud rate undefined" - #define CONSOLE_BAUDRATE 9600 -#endif - -/* - * ------------------------------------------------------------ - * rs_stop() and rs_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - * ------------------------------------------------------------ - */ -static void rs_360_stop(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - int idx; - unsigned long flags; - volatile struct scc_regs *sccp; - volatile struct smc_regs *smcp; - - if (serial_paranoia_check(info, tty->name, "rs_stop")) - return; - - local_irq_save(flags); - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - sccp->scc_sccm &= ~UART_SCCM_TX; - } else { - /* smcp = &cpmp->cp_smc[idx]; */ - smcp = &pquicc->smc_regs[idx]; - smcp->smc_smcm &= ~SMCM_TX; - } - local_irq_restore(flags); -} - - -static void rs_360_start(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - int idx; - unsigned long flags; - volatile struct scc_regs *sccp; - volatile struct smc_regs *smcp; - - if (serial_paranoia_check(info, tty->name, "rs_stop")) - return; - - local_irq_save(flags); - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - sccp->scc_sccm |= UART_SCCM_TX; - } else { - smcp = &pquicc->smc_regs[idx]; - smcp->smc_smcm |= SMCM_TX; - } - local_irq_restore(flags); -} - -/* - * ---------------------------------------------------------------------- - * - * Here starts the interrupt handling routines. All of the following - * subroutines are declared as inline and are folded into - * rs_interrupt(). They were separated out for readability's sake. - * - * Note: rs_interrupt() is a "fast" interrupt, which means that it - * runs with interrupts turned off. People who may want to modify - * rs_interrupt() should try to keep the interrupt handler as fast as - * possible. After you are done making modifications, it is not a bad - * idea to do: - * - * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c - * - * and look at the resulting assemble code in serial.s. - * - * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 - * ----------------------------------------------------------------------- - */ - -static _INLINE_ void receive_chars(ser_info_t *info) -{ - struct tty_struct *tty = info->port.tty; - unsigned char ch, flag, *cp; - /*int ignored = 0;*/ - int i; - ushort status; - struct async_icount *icount; - /* struct async_icount_24 *icount; */ - volatile QUICC_BD *bdp; - - icount = &info->state->icount; - - /* Just loop through the closed BDs and copy the characters into - * the buffer. - */ - bdp = info->rx_cur; - for (;;) { - if (bdp->status & BD_SC_EMPTY) /* If this one is empty */ - break; /* we are all done */ - - /* The read status mask tell us what we should do with - * incoming characters, especially if errors occur. - * One special case is the use of BD_SC_EMPTY. If - * this is not set, we are supposed to be ignoring - * inputs. In this case, just mark the buffer empty and - * continue. - */ - if (!(info->read_status_mask & BD_SC_EMPTY)) { - bdp->status |= BD_SC_EMPTY; - bdp->status &= - ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV); - - if (bdp->status & BD_SC_WRAP) - bdp = info->rx_bd_base; - else - bdp++; - continue; - } - - /* Get the number of characters and the buffer pointer. - */ - i = bdp->length; - /* cp = (unsigned char *)__va(bdp->buf); */ - cp = (char *)bdp->buf; - status = bdp->status; - - while (i-- > 0) { - ch = *cp++; - icount->rx++; - -#ifdef SERIAL_DEBUG_INTR - printk("DR%02x:%02x...", ch, status); -#endif - flag = TTY_NORMAL; - - if (status & (BD_SC_BR | BD_SC_FR | - BD_SC_PR | BD_SC_OV)) { - /* - * For statistics only - */ - if (status & BD_SC_BR) - icount->brk++; - else if (status & BD_SC_PR) - icount->parity++; - else if (status & BD_SC_FR) - icount->frame++; - if (status & BD_SC_OV) - icount->overrun++; - - /* - * Now check to see if character should be - * ignored, and mask off conditions which - * should be ignored. - if (status & info->ignore_status_mask) { - if (++ignored > 100) - break; - continue; - } - */ - status &= info->read_status_mask; - - if (status & (BD_SC_BR)) { -#ifdef SERIAL_DEBUG_INTR - printk("handling break...."); -#endif - *tty->flip.flag_buf_ptr = TTY_BREAK; - if (info->flags & ASYNC_SAK) - do_SAK(tty); - } else if (status & BD_SC_PR) - flag = TTY_PARITY; - else if (status & BD_SC_FR) - flag = TTY_FRAME; - } - tty_insert_flip_char(tty, ch, flag); - if (status & BD_SC_OV) - /* - * Overrun is special, since it's - * reported immediately, and doesn't - * affect the current character - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - - /* This BD is ready to be used again. Clear status. - * Get next BD. - */ - bdp->status |= BD_SC_EMPTY; - bdp->status &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV); - - if (bdp->status & BD_SC_WRAP) - bdp = info->rx_bd_base; - else - bdp++; - } - - info->rx_cur = (QUICC_BD *)bdp; - - tty_schedule_flip(tty); -} - -static _INLINE_ void receive_break(ser_info_t *info) -{ - struct tty_struct *tty = info->port.tty; - - info->state->icount.brk++; - /* Check to see if there is room in the tty buffer for - * the break. If not, we exit now, losing the break. FIXME - */ - tty_insert_flip_char(tty, 0, TTY_BREAK); - tty_schedule_flip(tty); -} - -static _INLINE_ void transmit_chars(ser_info_t *info) -{ - - if ((info->flags & TX_WAKEUP) || - (info->port.tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) { - schedule_work(&info->tqueue); - } - -#ifdef SERIAL_DEBUG_INTR - printk("THRE..."); -#endif -} - -#ifdef notdef - /* I need to do this for the SCCs, so it is left as a reminder. - */ -static _INLINE_ void check_modem_status(struct async_struct *info) -{ - int status; - /* struct async_icount *icount; */ - struct async_icount_24 *icount; - - status = serial_in(info, UART_MSR); - - if (status & UART_MSR_ANY_DELTA) { - icount = &info->state->icount; - /* update input line counters */ - if (status & UART_MSR_TERI) - icount->rng++; - if (status & UART_MSR_DDSR) - icount->dsr++; - if (status & UART_MSR_DDCD) { - icount->dcd++; -#ifdef CONFIG_HARD_PPS - if ((info->flags & ASYNC_HARDPPS_CD) && - (status & UART_MSR_DCD)) - hardpps(); -#endif - } - if (status & UART_MSR_DCTS) - icount->cts++; - wake_up_interruptible(&info->delta_msr_wait); - } - - if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { -#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR)) - printk("ttys%d CD now %s...", info->line, - (status & UART_MSR_DCD) ? "on" : "off"); -#endif - if (status & UART_MSR_DCD) - wake_up_interruptible(&info->open_wait); - else { -#ifdef SERIAL_DEBUG_OPEN - printk("scheduling hangup..."); -#endif - queue_task(&info->tqueue_hangup, - &tq_scheduler); - } - } - if (info->flags & ASYNC_CTS_FLOW) { - if (info->port.tty->hw_stopped) { - if (status & UART_MSR_CTS) { -#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) - printk("CTS tx start..."); -#endif - info->port.tty->hw_stopped = 0; - info->IER |= UART_IER_THRI; - serial_out(info, UART_IER, info->IER); - rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); - return; - } - } else { - if (!(status & UART_MSR_CTS)) { -#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) - printk("CTS tx stop..."); -#endif - info->port.tty->hw_stopped = 1; - info->IER &= ~UART_IER_THRI; - serial_out(info, UART_IER, info->IER); - } - } - } -} -#endif - -/* - * This is the serial driver's interrupt routine for a single port - */ -/* static void rs_360_interrupt(void *dev_id) */ /* until and if we start servicing irqs here */ -static void rs_360_interrupt(int vec, void *dev_id) -{ - u_char events; - int idx; - ser_info_t *info; - volatile struct smc_regs *smcp; - volatile struct scc_regs *sccp; - - info = dev_id; - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - events = sccp->scc_scce; - if (events & SCCM_RX) - receive_chars(info); - if (events & SCCM_TX) - transmit_chars(info); - sccp->scc_scce = events; - } else { - smcp = &pquicc->smc_regs[idx]; - events = smcp->smc_smce; - if (events & SMCM_BRKE) - receive_break(info); - if (events & SMCM_RX) - receive_chars(info); - if (events & SMCM_TX) - transmit_chars(info); - smcp->smc_smce = events; - } - -#ifdef SERIAL_DEBUG_INTR - printk("rs_interrupt_single(%d, %x)...", - info->state->smc_scc_num, events); -#endif -#ifdef modem_control - check_modem_status(info); -#endif - info->last_active = jiffies; -#ifdef SERIAL_DEBUG_INTR - printk("end.\n"); -#endif -} - - -/* - * ------------------------------------------------------------------- - * Here ends the serial interrupt routines. - * ------------------------------------------------------------------- - */ - - -static void do_softint(void *private_) -{ - ser_info_t *info = (ser_info_t *) private_; - struct tty_struct *tty; - - tty = info->port.tty; - if (!tty) - return; - - if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) - tty_wakeup(tty); -} - - -/* - * This routine is called from the scheduler tqueue when the interrupt - * routine has signalled that a hangup has occurred. The path of - * hangup processing is: - * - * serial interrupt routine -> (scheduler tqueue) -> - * do_serial_hangup() -> tty->hangup() -> rs_hangup() - * - */ -static void do_serial_hangup(void *private_) -{ - struct async_struct *info = (struct async_struct *) private_; - struct tty_struct *tty; - - tty = info->port.tty; - if (!tty) - return; - - tty_hangup(tty); -} - - -static int startup(ser_info_t *info) -{ - unsigned long flags; - int retval=0; - int idx; - /*struct serial_state *state = info->state;*/ - volatile struct smc_regs *smcp; - volatile struct scc_regs *sccp; - volatile struct smc_uart_pram *up; - volatile struct uart_pram *scup; - - - local_irq_save(flags); - - if (info->flags & ASYNC_INITIALIZED) { - goto errout; - } - -#ifdef maybe - if (!state->port || !state->type) { - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - goto errout; - } -#endif - -#ifdef SERIAL_DEBUG_OPEN - printk("starting up ttys%d (irq %d)...", info->line, state->irq); -#endif - - -#ifdef modem_control - info->MCR = 0; - if (info->port.tty->termios->c_cflag & CBAUD) - info->MCR = UART_MCR_DTR | UART_MCR_RTS; -#endif - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - /* - * and set the speed of the serial port - */ - change_speed(info); - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - scup = &pquicc->pram[info->state->port].scc.pscc.u; - - scup->mrblr = RX_BUF_SIZE; - scup->max_idl = RX_BUF_SIZE; - - sccp->scc_sccm |= (UART_SCCM_TX | UART_SCCM_RX); - sccp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - } else { - smcp = &pquicc->smc_regs[idx]; - - /* Enable interrupts and I/O. - */ - smcp->smc_smcm |= (SMCM_RX | SMCM_TX); - smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN); - - /* We can tune the buffer length and idle characters - * to take advantage of the entire incoming buffer size. - * If mrblr is something other than 1, maxidl has to be - * non-zero or we never get an interrupt. The maxidl - * is the number of character times we wait after reception - * of the last character before we decide no more characters - * are coming. - */ - /* up = (smc_uart_t *)&pquicc->cp_dparam[state->port]; */ - /* holy unionized structures, Batman: */ - up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; - - up->mrblr = RX_BUF_SIZE; - up->max_idl = RX_BUF_SIZE; - - up->brkcr = 1; /* number of break chars */ - } - - info->flags |= ASYNC_INITIALIZED; - local_irq_restore(flags); - return 0; - -errout: - local_irq_restore(flags); - return retval; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void shutdown(ser_info_t *info) -{ - unsigned long flags; - struct serial_state *state; - int idx; - volatile struct smc_regs *smcp; - volatile struct scc_regs *sccp; - - if (!(info->flags & ASYNC_INITIALIZED)) - return; - - state = info->state; - -#ifdef SERIAL_DEBUG_OPEN - printk("Shutting down serial port %d (irq %d)....", info->line, - state->irq); -#endif - - local_irq_save(flags); - - idx = PORT_NUM(state->smc_scc_num); - if (state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - sccp->scc_gsmr.w.low &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); -#ifdef CONFIG_SERIAL_CONSOLE - /* We can't disable the transmitter if this is the - * system console. - */ - if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT) -#endif - sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); - } else { - smcp = &pquicc->smc_regs[idx]; - - /* Disable interrupts and I/O. - */ - smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX); -#ifdef CONFIG_SERIAL_CONSOLE - /* We can't disable the transmitter if this is the - * system console. - */ - if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT) -#endif - smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - } - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->flags &= ~ASYNC_INITIALIZED; - local_irq_restore(flags); -} - -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static void change_speed(ser_info_t *info) -{ - int baud_rate; - unsigned cflag, cval, scval, prev_mode; - int i, bits, sbits, idx; - unsigned long flags; - struct serial_state *state; - volatile struct smc_regs *smcp; - volatile struct scc_regs *sccp; - - if (!info->port.tty || !info->port.tty->termios) - return; - cflag = info->port.tty->termios->c_cflag; - - state = info->state; - - /* Character length programmed into the mode register is the - * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, - * 1 or 2 stop bits, minus 1. - * The value 'bits' counts this for us. - */ - cval = 0; - scval = 0; - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: bits = 5; break; - case CS6: bits = 6; break; - case CS7: bits = 7; break; - case CS8: bits = 8; break; - /* Never happens, but GCC is too dumb to figure it out */ - default: bits = 8; break; - } - sbits = bits - 5; - - if (cflag & CSTOPB) { - cval |= SMCMR_SL; /* Two stops */ - scval |= SCU_PMSR_SL; - bits++; - } - if (cflag & PARENB) { - cval |= SMCMR_PEN; - scval |= SCU_PMSR_PEN; - bits++; - } - if (!(cflag & PARODD)) { - cval |= SMCMR_PM_EVEN; - scval |= (SCU_PMSR_REVP | SCU_PMSR_TEVP); - } - - /* Determine divisor based on baud rate */ - i = cflag & CBAUD; - if (i >= (sizeof(baud_table)/sizeof(int))) - baud_rate = 9600; - else - baud_rate = baud_table[i]; - - info->timeout = (TX_BUF_SIZE*HZ*bits); - info->timeout += HZ/50; /* Add .02 seconds of slop */ - -#ifdef modem_control - /* CTS flow control flag and modem status interrupts */ - info->IER &= ~UART_IER_MSI; - if (info->flags & ASYNC_HARDPPS_CD) - info->IER |= UART_IER_MSI; - if (cflag & CRTSCTS) { - info->flags |= ASYNC_CTS_FLOW; - info->IER |= UART_IER_MSI; - } else - info->flags &= ~ASYNC_CTS_FLOW; - if (cflag & CLOCAL) - info->flags &= ~ASYNC_CHECK_CD; - else { - info->flags |= ASYNC_CHECK_CD; - info->IER |= UART_IER_MSI; - } - serial_out(info, UART_IER, info->IER); -#endif - - /* - * Set up parity check flag - */ - info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV); - if (I_INPCK(info->port.tty)) - info->read_status_mask |= BD_SC_FR | BD_SC_PR; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask |= BD_SC_BR; - - /* - * Characters to ignore - */ - info->ignore_status_mask = 0; - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask |= BD_SC_PR | BD_SC_FR; - if (I_IGNBRK(info->port.tty)) { - info->ignore_status_mask |= BD_SC_BR; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->port.tty)) - info->ignore_status_mask |= BD_SC_OV; - } - /* - * !!! ignore all characters if CREAD is not set - */ - if ((cflag & CREAD) == 0) - info->read_status_mask &= ~BD_SC_EMPTY; - local_irq_save(flags); - - /* Start bit has not been added (so don't, because we would just - * subtract it later), and we need to add one for the number of - * stops bits (there is always at least one). - */ - bits++; - idx = PORT_NUM(state->smc_scc_num); - if (state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - sccp->scc_psmr = (sbits << 12) | scval; - } else { - smcp = &pquicc->smc_regs[idx]; - - /* Set the mode register. We want to keep a copy of the - * enables, because we want to put them back if they were - * present. - */ - prev_mode = smcp->smc_smcmr; - smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART; - smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN)); - } - - m360_cpm_setbrg((state - rs_table), baud_rate); - - local_irq_restore(flags); -} - -static void rs_360_put_char(struct tty_struct *tty, unsigned char ch) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - volatile QUICC_BD *bdp; - - if (serial_paranoia_check(info, tty->name, "rs_put_char")) - return 0; - - if (!tty) - return 0; - - bdp = info->tx_cur; - while (bdp->status & BD_SC_READY); - - /* *((char *)__va(bdp->buf)) = ch; */ - *((char *)bdp->buf) = ch; - bdp->length = 1; - bdp->status |= BD_SC_READY; - - /* Get next BD. - */ - if (bdp->status & BD_SC_WRAP) - bdp = info->tx_bd_base; - else - bdp++; - - info->tx_cur = (QUICC_BD *)bdp; - return 1; - -} - -static int rs_360_write(struct tty_struct * tty, - const unsigned char *buf, int count) -{ - int c, ret = 0; - ser_info_t *info = (ser_info_t *)tty->driver_data; - volatile QUICC_BD *bdp; - -#ifdef CONFIG_KGDB - /* Try to let stub handle output. Returns true if it did. */ - if (kgdb_output_string(buf, count)) - return ret; -#endif - - if (serial_paranoia_check(info, tty->name, "rs_write")) - return 0; - - if (!tty) - return 0; - - bdp = info->tx_cur; - - while (1) { - c = min(count, TX_BUF_SIZE); - - if (c <= 0) - break; - - if (bdp->status & BD_SC_READY) { - info->flags |= TX_WAKEUP; - break; - } - - /* memcpy(__va(bdp->buf), buf, c); */ - memcpy((void *)bdp->buf, buf, c); - - bdp->length = c; - bdp->status |= BD_SC_READY; - - buf += c; - count -= c; - ret += c; - - /* Get next BD. - */ - if (bdp->status & BD_SC_WRAP) - bdp = info->tx_bd_base; - else - bdp++; - info->tx_cur = (QUICC_BD *)bdp; - } - return ret; -} - -static int rs_360_write_room(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - int ret; - - if (serial_paranoia_check(info, tty->name, "rs_write_room")) - return 0; - - if ((info->tx_cur->status & BD_SC_READY) == 0) { - info->flags &= ~TX_WAKEUP; - ret = TX_BUF_SIZE; - } - else { - info->flags |= TX_WAKEUP; - ret = 0; - } - return ret; -} - -/* I could track this with transmit counters....maybe later. -*/ -static int rs_360_chars_in_buffer(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) - return 0; - return 0; -} - -static void rs_360_flush_buffer(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) - return; - - /* There is nothing to "flush", whatever we gave the CPM - * is on its way out. - */ - tty_wakeup(tty); - info->flags &= ~TX_WAKEUP; -} - -/* - * This function is used to send a high-priority XON/XOFF character to - * the device - */ -static void rs_360_send_xchar(struct tty_struct *tty, char ch) -{ - volatile QUICC_BD *bdp; - - ser_info_t *info = (ser_info_t *)tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_send_char")) - return; - - bdp = info->tx_cur; - while (bdp->status & BD_SC_READY); - - /* *((char *)__va(bdp->buf)) = ch; */ - *((char *)bdp->buf) = ch; - bdp->length = 1; - bdp->status |= BD_SC_READY; - - /* Get next BD. - */ - if (bdp->status & BD_SC_WRAP) - bdp = info->tx_bd_base; - else - bdp++; - - info->tx_cur = (QUICC_BD *)bdp; -} - -/* - * ------------------------------------------------------------ - * rs_throttle() - * - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - * ------------------------------------------------------------ - */ -static void rs_360_throttle(struct tty_struct * tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %d....\n", _tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "rs_throttle")) - return; - - if (I_IXOFF(tty)) - rs_360_send_xchar(tty, STOP_CHAR(tty)); - -#ifdef modem_control - if (tty->termios->c_cflag & CRTSCTS) - info->MCR &= ~UART_MCR_RTS; - - local_irq_disable(); - serial_out(info, UART_MCR, info->MCR); - local_irq_enable(); -#endif -} - -static void rs_360_unthrottle(struct tty_struct * tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("unthrottle %s: %d....\n", _tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) - return; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - rs_360_send_xchar(tty, START_CHAR(tty)); - } -#ifdef modem_control - if (tty->termios->c_cflag & CRTSCTS) - info->MCR |= UART_MCR_RTS; - local_irq_disable(); - serial_out(info, UART_MCR, info->MCR); - local_irq_enable(); -#endif -} - -/* - * ------------------------------------------------------------ - * rs_ioctl() and friends - * ------------------------------------------------------------ - */ - -#ifdef maybe -/* - * get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int get_lsr_info(struct async_struct * info, unsigned int *value) -{ - unsigned char status; - unsigned int result; - - local_irq_disable(); - status = serial_in(info, UART_LSR); - local_irq_enable(); - result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); - return put_user(result,value); -} -#endif - -static int rs_360_tiocmget(struct tty_struct *tty, struct file *file) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - unsigned int result = 0; -#ifdef modem_control - unsigned char control, status; - - if (serial_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - control = info->MCR; - local_irq_disable(); - status = serial_in(info, UART_MSR); - local_irq_enable(); - result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) - | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) -#ifdef TIOCM_OUT1 - | ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0) - | ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0) -#endif - | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) - | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) - | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) - | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); -#endif - return result; -} - -static int rs_360_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ -#ifdef modem_control - ser_info_t *info = (ser_info_t *)tty->driver_data; - unsigned int arg; - - if (serial_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - /* FIXME: locking on info->mcr */ - if (set & TIOCM_RTS) - info->mcr |= UART_MCR_RTS; - if (set & TIOCM_DTR) - info->mcr |= UART_MCR_DTR; - if (clear & TIOCM_RTS) - info->MCR &= ~UART_MCR_RTS; - if (clear & TIOCM_DTR) - info->MCR &= ~UART_MCR_DTR; - -#ifdef TIOCM_OUT1 - if (set & TIOCM_OUT1) - info->MCR |= UART_MCR_OUT1; - if (set & TIOCM_OUT2) - info->MCR |= UART_MCR_OUT2; - if (clear & TIOCM_OUT1) - info->MCR &= ~UART_MCR_OUT1; - if (clear & TIOCM_OUT2) - info->MCR &= ~UART_MCR_OUT2; -#endif - - local_irq_disable(); - serial_out(info, UART_MCR, info->MCR); - local_irq_enable(); -#endif - return 0; -} - -/* Sending a break is a two step process on the SMC/SCC. It is accomplished - * by sending a STOP TRANSMIT command followed by a RESTART TRANSMIT - * command. We take advantage of the begin/end functions to make this - * happen. - */ -static ushort smc_chan_map[] = { - CPM_CR_CH_SMC1, - CPM_CR_CH_SMC2 -}; - -static ushort scc_chan_map[] = { - CPM_CR_CH_SCC1, - CPM_CR_CH_SCC2, - CPM_CR_CH_SCC3, - CPM_CR_CH_SCC4 -}; - -static void begin_break(ser_info_t *info) -{ - volatile QUICC *cp; - ushort chan; - int idx; - - cp = pquicc; - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) - chan = scc_chan_map[idx]; - else - chan = smc_chan_map[idx]; - - cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; - while (cp->cp_cr & CPM_CR_FLG); -} - -static void end_break(ser_info_t *info) -{ - volatile QUICC *cp; - ushort chan; - int idx; - - cp = pquicc; - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) - chan = scc_chan_map[idx]; - else - chan = smc_chan_map[idx]; - - cp->cp_cr = mk_cr_cmd(chan, CPM_CR_RESTART_TX) | CPM_CR_FLG; - while (cp->cp_cr & CPM_CR_FLG); -} - -/* - * This routine sends a break character out the serial port. - */ -static void send_break(ser_info_t *info, unsigned int duration) -{ -#ifdef SERIAL_DEBUG_SEND_BREAK - printk("rs_send_break(%d) jiff=%lu...", duration, jiffies); -#endif - begin_break(info); - msleep_interruptible(duration); - end_break(info); -#ifdef SERIAL_DEBUG_SEND_BREAK - printk("done jiffies=%lu\n", jiffies); -#endif -} - - -/* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ -static int rs_360_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - struct async_icount cnow; - - local_irq_disable(); - cnow = info->state->icount; - local_irq_enable(); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - - return 0; -} - -static int rs_360_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) -{ - int error; - ser_info_t *info = (ser_info_t *)tty->driver_data; - int retval; - struct async_icount cnow; - /* struct async_icount_24 cnow;*/ /* kernel counter temps */ - struct serial_icounter_struct *p_cuser; /* user space */ - - if (serial_paranoia_check(info, tty->name, "rs_ioctl")) - return -ENODEV; - - if (cmd != TIOCMIWAIT) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case TCSBRK: /* SVID version: non-zero arg --> no break */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - if (signal_pending(current)) - return -EINTR; - if (!arg) { - send_break(info, 250); /* 1/4 second */ - if (signal_pending(current)) - return -EINTR; - } - return 0; - case TCSBRKP: /* support for POSIX tcsendbreak() */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - if (signal_pending(current)) - return -EINTR; - send_break(info, arg ? arg*100 : 250); - if (signal_pending(current)) - return -EINTR; - return 0; - case TIOCSBRK: - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - begin_break(info); - return 0; - case TIOCCBRK: - retval = tty_check_change(tty); - if (retval) - return retval; - end_break(info); - return 0; -#ifdef maybe - case TIOCSERGETLSR: /* Get line status register */ - return get_lsr_info(info, (unsigned int *) arg); -#endif - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT: -#ifdef modem_control - local_irq_disable(); - /* note the counters on entry */ - cprev = info->state->icount; - local_irq_enable(); - while (1) { - interruptible_sleep_on(&info->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - local_irq_disable(); - cnow = info->state->icount; /* atomic copy */ - local_irq_enable(); - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { - return 0; - } - cprev = cnow; - } - /* NOTREACHED */ -#else - return 0; -#endif - - - default: - return -ENOIOCTLCMD; - } - return 0; -} - -/* FIX UP modem control here someday...... -*/ -static void rs_360_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - - change_speed(info); - -#ifdef modem_control - /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && - !(tty->termios->c_cflag & CBAUD)) { - info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS); - local_irq_disable(); - serial_out(info, UART_MCR, info->MCR); - local_irq_enable(); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && - (tty->termios->c_cflag & CBAUD)) { - info->MCR |= UART_MCR_DTR; - if (!tty->hw_stopped || - !(tty->termios->c_cflag & CRTSCTS)) { - info->MCR |= UART_MCR_RTS; - } - local_irq_disable(); - serial_out(info, UART_MCR, info->MCR); - local_irq_enable(); - } - - /* Handle turning off CRTSCTS */ - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - rs_360_start(tty); - } -#endif - -#if 0 - /* - * No need to wake up processes in open wait, since they - * sample the CLOCAL flag once, and don't recheck it. - * XXX It's not clear whether the current behavior is correct - * or not. Hence, this may change..... - */ - if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&info->open_wait); -#endif -} - -/* - * ------------------------------------------------------------ - * rs_close() - * - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * async structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - * ------------------------------------------------------------ - */ -static void rs_360_close(struct tty_struct *tty, struct file * filp) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - /* struct async_state *state; */ - struct serial_state *state; - unsigned long flags; - int idx; - volatile struct smc_regs *smcp; - volatile struct scc_regs *sccp; - - if (!info || serial_paranoia_check(info, tty->name, "rs_close")) - return; - - state = info->state; - - local_irq_save(flags); - - if (tty_hung_up_p(filp)) { - DBG_CNT("before DEC-hung"); - local_irq_restore(flags); - return; - } - -#ifdef SERIAL_DEBUG_OPEN - printk("rs_close ttys%d, count = %d\n", info->line, state->count); -#endif - if ((tty->count == 1) && (state->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. state->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk("rs_close: bad serial port count; tty->count is 1, " - "state->count is %d\n", state->count); - state->count = 1; - } - if (--state->count < 0) { - printk("rs_close: bad serial port count for ttys%d: %d\n", - info->line, state->count); - state->count = 0; - } - if (state->count) { - DBG_CNT("before DEC-2"); - local_irq_restore(flags); - return; - } - info->flags |= ASYNC_CLOSING; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - info->read_status_mask &= ~BD_SC_EMPTY; - if (info->flags & ASYNC_INITIALIZED) { - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - sccp = &pquicc->scc_regs[idx]; - sccp->scc_sccm &= ~UART_SCCM_RX; - sccp->scc_gsmr.w.low &= ~SCC_GSMRL_ENR; - } else { - smcp = &pquicc->smc_regs[idx]; - smcp->smc_smcm &= ~SMCM_RX; - smcp->smc_smcmr &= ~SMCMR_REN; - } - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - rs_360_wait_until_sent(tty, info->timeout); - } - shutdown(info); - rs_360_flush_buffer(tty); - tty_ldisc_flush(tty); - tty->closing = 0; - info->event = 0; - info->port.tty = NULL; - if (info->blocked_open) { - if (info->close_delay) { - msleep_interruptible(jiffies_to_msecs(info->close_delay)); - } - wake_up_interruptible(&info->open_wait); - } - info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); - local_irq_restore(flags); -} - -/* - * rs_wait_until_sent() --- wait until the transmitter is empty - */ -static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - unsigned long orig_jiffies, char_time; - /*int lsr;*/ - volatile QUICC_BD *bdp; - - if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent")) - return; - -#ifdef maybe - if (info->state->type == PORT_UNKNOWN) - return; -#endif - - orig_jiffies = jiffies; - /* - * Set the check interval to be 1/5 of the estimated time to - * send a single character, and make it at least 1. The check - * interval should also be less than the timeout. - * - * Note: we have to use pretty tight timings here to satisfy - * the NIST-PCTS. - */ - char_time = 1; - if (timeout) - char_time = min(char_time, (unsigned long)timeout); -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time); - printk("jiff=%lu...", jiffies); -#endif - - /* We go through the loop at least once because we can't tell - * exactly when the last character exits the shifter. There can - * be at least two characters waiting to be sent after the buffers - * are empty. - */ - do { -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("lsr = %d (jiff=%lu)...", lsr, jiffies); -#endif -/* current->counter = 0; make us low-priority */ - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (timeout && (time_after(jiffies, orig_jiffies + timeout))) - break; - /* The 'tx_cur' is really the next buffer to send. We - * have to back up to the previous BD and wait for it - * to go. This isn't perfect, because all this indicates - * is the buffer is available. There are still characters - * in the CPM FIFO. - */ - bdp = info->tx_cur; - if (bdp == info->tx_bd_base) - bdp += (TX_NUM_FIFO-1); - else - bdp--; - } while (bdp->status & BD_SC_READY); - current->state = TASK_RUNNING; -#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT - printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); -#endif -} - -/* - * rs_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -static void rs_360_hangup(struct tty_struct *tty) -{ - ser_info_t *info = (ser_info_t *)tty->driver_data; - struct serial_state *state = info->state; - - if (serial_paranoia_check(info, tty->name, "rs_hangup")) - return; - - state = info->state; - - rs_360_flush_buffer(tty); - shutdown(info); - info->event = 0; - state->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->port.tty = NULL; - wake_up_interruptible(&info->open_wait); -} - -/* - * ------------------------------------------------------------ - * rs_open() and friends - * ------------------------------------------------------------ - */ -static int block_til_ready(struct tty_struct *tty, struct file * filp, - ser_info_t *info) -{ -#ifdef DO_THIS_LATER - DECLARE_WAITQUEUE(wait, current); -#endif - struct serial_state *state = info->state; - int retval; - int do_clocal = 0; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->close_wait); -#ifdef SERIAL_DO_RESTART - if (info->flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; -#else - return -EAGAIN; -#endif - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - * If this is an SMC port, we don't have modem control to wait - * for, so just get out here. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR)) || - !(info->state->smc_scc_num & NUM_IS_SCC)) { - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, state->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; -#ifdef DO_THIS_LATER - add_wait_queue(&info->open_wait, &wait); -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready before block: ttys%d, count = %d\n", - state->line, state->count); -#endif - local_irq_disable(); - if (!tty_hung_up_p(filp)) - state->count--; - local_irq_enable(); - info->blocked_open++; - while (1) { - local_irq_disable(); - if (tty->termios->c_cflag & CBAUD) - serial_out(info, UART_MCR, - serial_inp(info, UART_MCR) | - (UART_MCR_DTR | UART_MCR_RTS)); - local_irq_enable(); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(info->flags & ASYNC_INITIALIZED)) { -#ifdef SERIAL_DO_RESTART - if (info->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; -#else - retval = -EAGAIN; -#endif - break; - } - if (!(info->flags & ASYNC_CLOSING) && - (do_clocal || (serial_in(info, UART_MSR) & - UART_MSR_DCD))) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready blocking: ttys%d, count = %d\n", - info->line, state->count); -#endif - tty_unlock(); - schedule(); - tty_lock(); - } - current->state = TASK_RUNNING; - remove_wait_queue(&info->open_wait, &wait); - if (!tty_hung_up_p(filp)) - state->count++; - info->blocked_open--; -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready after blocking: ttys%d, count = %d\n", - info->line, state->count); -#endif -#endif /* DO_THIS_LATER */ - if (retval) - return retval; - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} - -static int get_async_struct(int line, ser_info_t **ret_info) -{ - struct serial_state *sstate; - - sstate = rs_table + line; - if (sstate->info) { - sstate->count++; - *ret_info = (ser_info_t *)sstate->info; - return 0; - } - else { - return -ENOMEM; - } -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its async structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -static int rs_360_open(struct tty_struct *tty, struct file * filp) -{ - ser_info_t *info; - int retval, line; - - line = tty->index; - if ((line < 0) || (line >= NR_PORTS)) - return -ENODEV; - retval = get_async_struct(line, &info); - if (retval) - return retval; - if (serial_paranoia_check(info, tty->name, "rs_open")) - return -ENODEV; - -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open %s, count = %d\n", tty->name, info->state->count); -#endif - tty->driver_data = info; - info->port.tty = tty; - - /* - * Start up serial port - */ - retval = startup(info); - if (retval) - return retval; - - retval = block_til_ready(tty, filp, info); - if (retval) { -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open returning after block_til_ready with %d\n", - retval); -#endif - return retval; - } - -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open %s successful...", tty->name); -#endif - return 0; -} - -/* - * /proc fs routines.... - */ - -static inline int line_info(char *buf, struct serial_state *state) -{ -#ifdef notdef - struct async_struct *info = state->info, scr_info; - char stat_buf[30], control, status; -#endif - int ret; - - ret = sprintf(buf, "%d: uart:%s port:%X irq:%d", - state->line, - (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC", - (unsigned int)(state->port), state->irq); - - if (!state->port || (state->type == PORT_UNKNOWN)) { - ret += sprintf(buf+ret, "\n"); - return ret; - } - -#ifdef notdef - /* - * Figure out the current RS-232 lines - */ - if (!info) { - info = &scr_info; /* This is just for serial_{in,out} */ - - info->magic = SERIAL_MAGIC; - info->port = state->port; - info->flags = state->flags; - info->quot = 0; - info->port.tty = NULL; - } - local_irq_disable(); - status = serial_in(info, UART_MSR); - control = info ? info->MCR : serial_in(info, UART_MCR); - local_irq_enable(); - - stat_buf[0] = 0; - stat_buf[1] = 0; - if (control & UART_MCR_RTS) - strcat(stat_buf, "|RTS"); - if (status & UART_MSR_CTS) - strcat(stat_buf, "|CTS"); - if (control & UART_MCR_DTR) - strcat(stat_buf, "|DTR"); - if (status & UART_MSR_DSR) - strcat(stat_buf, "|DSR"); - if (status & UART_MSR_DCD) - strcat(stat_buf, "|CD"); - if (status & UART_MSR_RI) - strcat(stat_buf, "|RI"); - - if (info->quot) { - ret += sprintf(buf+ret, " baud:%d", - state->baud_base / info->quot); - } - - ret += sprintf(buf+ret, " tx:%d rx:%d", - state->icount.tx, state->icount.rx); - - if (state->icount.frame) - ret += sprintf(buf+ret, " fe:%d", state->icount.frame); - - if (state->icount.parity) - ret += sprintf(buf+ret, " pe:%d", state->icount.parity); - - if (state->icount.brk) - ret += sprintf(buf+ret, " brk:%d", state->icount.brk); - - if (state->icount.overrun) - ret += sprintf(buf+ret, " oe:%d", state->icount.overrun); - - /* - * Last thing is the RS-232 status lines - */ - ret += sprintf(buf+ret, " %s\n", stat_buf+1); -#endif - return ret; -} - -int rs_360_read_proc(char *page, char **start, off_t off, int count, - int *eof, void *data) -{ - int i, len = 0; - off_t begin = 0; - - len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version); - for (i = 0; i < NR_PORTS && len < 4000; i++) { - len += line_info(page + len, &rs_table[i]); - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } - } - *eof = 1; -done: - if (off >= len+begin) - return 0; - *start = page + (begin-off); - return ((count < begin+len-off) ? count : begin+len-off); -} - -/* - * --------------------------------------------------------------------- - * rs_init() and friends - * - * rs_init() is called at boot-time to initialize the serial driver. - * --------------------------------------------------------------------- - */ - -/* - * This routine prints out the appropriate serial driver version - * number, and identifies which options were configured into this - * driver. - */ -static _INLINE_ void show_serial_version(void) -{ - printk(KERN_INFO "%s version %s\n", serial_name, serial_version); -} - - -/* - * The serial console driver used during boot. Note that these names - * clash with those found in "serial.c", so we currently can't support - * the 16xxx uarts and these at the same time. I will fix this to become - * an indirect function call from tty_io.c (or something). - */ - -#ifdef CONFIG_SERIAL_CONSOLE - -/* - * Print a string to the serial port trying not to disturb any possible - * real use of the port... - */ -static void my_console_write(int idx, const char *s, - unsigned count) -{ - struct serial_state *ser; - ser_info_t *info; - unsigned i; - QUICC_BD *bdp, *bdbase; - volatile struct smc_uart_pram *up; - volatile u_char *cp; - - ser = rs_table + idx; - - - /* If the port has been initialized for general use, we have - * to use the buffer descriptors allocated there. Otherwise, - * we simply use the single buffer allocated. - */ - if ((info = (ser_info_t *)ser->info) != NULL) { - bdp = info->tx_cur; - bdbase = info->tx_bd_base; - } - else { - /* Pointer to UART in parameter ram. - */ - /* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */ - up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u; - - /* Get the address of the host memory buffer. - */ - bdp = bdbase = (QUICC_BD *)((uint)pquicc + (uint)up->tbase); - } - - /* - * We need to gracefully shut down the transmitter, disable - * interrupts, then send our bytes out. - */ - - /* - * Now, do each character. This is not as bad as it looks - * since this is a holding FIFO and not a transmitting FIFO. - * We could add the complexity of filling the entire transmit - * buffer, but we would just wait longer between accesses...... - */ - for (i = 0; i < count; i++, s++) { - /* Wait for transmitter fifo to empty. - * Ready indicates output is ready, and xmt is doing - * that, not that it is ready for us to send. - */ - while (bdp->status & BD_SC_READY); - - /* Send the character out. - */ - cp = bdp->buf; - *cp = *s; - - bdp->length = 1; - bdp->status |= BD_SC_READY; - - if (bdp->status & BD_SC_WRAP) - bdp = bdbase; - else - bdp++; - - /* if a LF, also do CR... */ - if (*s == 10) { - while (bdp->status & BD_SC_READY); - /* cp = __va(bdp->buf); */ - cp = bdp->buf; - *cp = 13; - bdp->length = 1; - bdp->status |= BD_SC_READY; - - if (bdp->status & BD_SC_WRAP) { - bdp = bdbase; - } - else { - bdp++; - } - } - } - - /* - * Finally, Wait for transmitter & holding register to empty - * and restore the IER - */ - while (bdp->status & BD_SC_READY); - - if (info) - info->tx_cur = (QUICC_BD *)bdp; -} - -static void serial_console_write(struct console *c, const char *s, - unsigned count) -{ -#ifdef CONFIG_KGDB - /* Try to let stub handle output. Returns true if it did. */ - if (kgdb_output_string(s, count)) - return; -#endif - my_console_write(c->index, s, count); -} - - - -/*void console_print_68360(const char *p) -{ - const char *cp = p; - int i; - - for (i=0;cp[i]!=0;i++); - - serial_console_write (p, i); - - //Comment this if you want to have a strict interrupt-driven output - //rs_fair_output(); - - return; -}*/ - - - - - - -#ifdef CONFIG_XMON -int -xmon_360_write(const char *s, unsigned count) -{ - my_console_write(0, s, count); - return(count); -} -#endif - -#ifdef CONFIG_KGDB -void -putDebugChar(char ch) -{ - my_console_write(0, &ch, 1); -} -#endif - -/* - * Receive character from the serial port. This only works well - * before the port is initialized for real use. - */ -static int my_console_wait_key(int idx, int xmon, char *obuf) -{ - struct serial_state *ser; - u_char c, *cp; - ser_info_t *info; - QUICC_BD *bdp; - volatile struct smc_uart_pram *up; - int i; - - ser = rs_table + idx; - - /* Get the address of the host memory buffer. - * If the port has been initialized for general use, we must - * use information from the port structure. - */ - if ((info = (ser_info_t *)ser->info)) - bdp = info->rx_cur; - else - /* bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; */ - bdp = (QUICC_BD *)((uint)pquicc + (uint)up->tbase); - - /* Pointer to UART in parameter ram. - */ - /* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */ - up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; - - /* - * We need to gracefully shut down the receiver, disable - * interrupts, then read the input. - * XMON just wants a poll. If no character, return -1, else - * return the character. - */ - if (!xmon) { - while (bdp->status & BD_SC_EMPTY); - } - else { - if (bdp->status & BD_SC_EMPTY) - return -1; - } - - cp = (char *)bdp->buf; - - if (obuf) { - i = c = bdp->length; - while (i-- > 0) - *obuf++ = *cp++; - } - else { - c = *cp; - } - bdp->status |= BD_SC_EMPTY; - - if (info) { - if (bdp->status & BD_SC_WRAP) { - bdp = info->rx_bd_base; - } - else { - bdp++; - } - info->rx_cur = (QUICC_BD *)bdp; - } - - return((int)c); -} - -static int serial_console_wait_key(struct console *co) -{ - return(my_console_wait_key(co->index, 0, NULL)); -} - -#ifdef CONFIG_XMON -int -xmon_360_read_poll(void) -{ - return(my_console_wait_key(0, 1, NULL)); -} - -int -xmon_360_read_char(void) -{ - return(my_console_wait_key(0, 0, NULL)); -} -#endif - -#ifdef CONFIG_KGDB -static char kgdb_buf[RX_BUF_SIZE], *kgdp; -static int kgdb_chars; - -unsigned char -getDebugChar(void) -{ - if (kgdb_chars <= 0) { - kgdb_chars = my_console_wait_key(0, 0, kgdb_buf); - kgdp = kgdb_buf; - } - kgdb_chars--; - - return(*kgdp++); -} - -void kgdb_interruptible(int state) -{ -} -void kgdb_map_scc(void) -{ - struct serial_state *ser; - uint mem_addr; - volatile QUICC_BD *bdp; - volatile smc_uart_t *up; - - cpmp = (cpm360_t *)&(((immap_t *)IMAP_ADDR)->im_cpm); - - /* To avoid data cache CPM DMA coherency problems, allocate a - * buffer in the CPM DPRAM. This will work until the CPM and - * serial ports are initialized. At that time a memory buffer - * will be allocated. - * The port is already initialized from the boot procedure, all - * we do here is give it a different buffer and make it a FIFO. - */ - - ser = rs_table; - - /* Right now, assume we are using SMCs. - */ - up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; - - /* Allocate space for an input FIFO, plus a few bytes for output. - * Allocate bytes to maintain word alignment. - */ - mem_addr = (uint)(&cpmp->cp_dpmem[0x1000]); - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; - bdp->buf = mem_addr; - - bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_tbase]; - bdp->buf = mem_addr+RX_BUF_SIZE; - - up->smc_mrblr = RX_BUF_SIZE; /* receive buffer length */ - up->smc_maxidl = RX_BUF_SIZE; -} -#endif - -static struct tty_struct *serial_console_device(struct console *c, int *index) -{ - *index = c->index; - return serial_driver; -} - - -struct console sercons = { - .name = "ttyS", - .write = serial_console_write, - .device = serial_console_device, - .wait_key = serial_console_wait_key, - .setup = serial_console_setup, - .flags = CON_PRINTBUFFER, - .index = CONFIG_SERIAL_CONSOLE_PORT, -}; - - - -/* - * Register console. - */ -long console_360_init(long kmem_start, long kmem_end) -{ - register_console(&sercons); - /*register_console (console_print_68360); - 2.0.38 only required a write - function pointer. */ - return kmem_start; -} - -#endif - -/* Index in baud rate table of the default console baud rate. -*/ -static int baud_idx; - -static const struct tty_operations rs_360_ops = { - .owner = THIS_MODULE, - .open = rs_360_open, - .close = rs_360_close, - .write = rs_360_write, - .put_char = rs_360_put_char, - .write_room = rs_360_write_room, - .chars_in_buffer = rs_360_chars_in_buffer, - .flush_buffer = rs_360_flush_buffer, - .ioctl = rs_360_ioctl, - .throttle = rs_360_throttle, - .unthrottle = rs_360_unthrottle, - /* .send_xchar = rs_360_send_xchar, */ - .set_termios = rs_360_set_termios, - .stop = rs_360_stop, - .start = rs_360_start, - .hangup = rs_360_hangup, - /* .wait_until_sent = rs_360_wait_until_sent, */ - /* .read_proc = rs_360_read_proc, */ - .tiocmget = rs_360_tiocmget, - .tiocmset = rs_360_tiocmset, -}; - -static int __init rs_360_init(void) -{ - struct serial_state * state; - ser_info_t *info; - void *mem_addr; - uint dp_addr, iobits; - int i, j, idx; - ushort chan; - QUICC_BD *bdp; - volatile QUICC *cp; - volatile struct smc_regs *sp; - volatile struct smc_uart_pram *up; - volatile struct scc_regs *scp; - volatile struct uart_pram *sup; - /* volatile immap_t *immap; */ - - serial_driver = alloc_tty_driver(NR_PORTS); - if (!serial_driver) - return -1; - - show_serial_version(); - - serial_driver->name = "ttyS"; - serial_driver->major = TTY_MAJOR; - serial_driver->minor_start = 64; - serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - serial_driver->subtype = SERIAL_TYPE_NORMAL; - serial_driver->init_termios = tty_std_termios; - serial_driver->init_termios.c_cflag = - baud_idx | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(serial_driver, &rs_360_ops); - - if (tty_register_driver(serial_driver)) - panic("Couldn't register serial driver\n"); - - cp = pquicc; /* Get pointer to Communication Processor */ - /* immap = (immap_t *)IMAP_ADDR; */ /* and to internal registers */ - - - /* Configure SCC2, SCC3, and SCC4 instead of port A parallel I/O. - */ - /* The "standard" configuration through the 860. - */ -/* immap->im_ioport.iop_papar |= 0x00fc; */ -/* immap->im_ioport.iop_padir &= ~0x00fc; */ -/* immap->im_ioport.iop_paodr &= ~0x00fc; */ - cp->pio_papar |= 0x00fc; - cp->pio_padir &= ~0x00fc; - /* cp->pio_paodr &= ~0x00fc; */ - - - /* Since we don't yet do modem control, connect the port C pins - * as general purpose I/O. This will assert CTS and CD for the - * SCC ports. - */ - /* FIXME: see 360um p.7-365 and 860um p.34-12 - * I can't make sense of these bits - mleslie*/ -/* immap->im_ioport.iop_pcdir |= 0x03c6; */ -/* immap->im_ioport.iop_pcpar &= ~0x03c6; */ - -/* cp->pio_pcdir |= 0x03c6; */ -/* cp->pio_pcpar &= ~0x03c6; */ - - - - /* Connect SCC2 and SCC3 to NMSI. Connect BRG3 to SCC2 and - * BRG4 to SCC3. - */ - cp->si_sicr &= ~0x00ffff00; - cp->si_sicr |= 0x001b1200; - -#ifdef CONFIG_PP04 - /* Frequentis PP04 forced to RS-232 until we know better. - * Port C 12 and 13 low enables RS-232 on SCC3 and SCC4. - */ - immap->im_ioport.iop_pcdir |= 0x000c; - immap->im_ioport.iop_pcpar &= ~0x000c; - immap->im_ioport.iop_pcdat &= ~0x000c; - - /* This enables the TX driver. - */ - cp->cp_pbpar &= ~0x6000; - cp->cp_pbdat &= ~0x6000; -#endif - - for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) { - state->magic = SSTATE_MAGIC; - state->line = i; - state->type = PORT_UNKNOWN; - state->custom_divisor = 0; - state->close_delay = 5*HZ/10; - state->closing_wait = 30*HZ; - state->icount.cts = state->icount.dsr = - state->icount.rng = state->icount.dcd = 0; - state->icount.rx = state->icount.tx = 0; - state->icount.frame = state->icount.parity = 0; - state->icount.overrun = state->icount.brk = 0; - printk(KERN_INFO "ttyS%d at irq 0x%02x is an %s\n", - i, (unsigned int)(state->irq), - (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC"); - -#ifdef CONFIG_SERIAL_CONSOLE - /* If we just printed the message on the console port, and - * we are about to initialize it for general use, we have - * to wait a couple of character times for the CR/NL to - * make it out of the transmit buffer. - */ - if (i == CONFIG_SERIAL_CONSOLE_PORT) - mdelay(8); - - -/* idx = PORT_NUM(info->state->smc_scc_num); */ -/* if (info->state->smc_scc_num & NUM_IS_SCC) */ -/* chan = scc_chan_map[idx]; */ -/* else */ -/* chan = smc_chan_map[idx]; */ - -/* cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; */ -/* while (cp->cp_cr & CPM_CR_FLG); */ - -#endif - /* info = kmalloc(sizeof(ser_info_t), GFP_KERNEL); */ - info = &quicc_ser_info[i]; - if (info) { - memset (info, 0, sizeof(ser_info_t)); - info->magic = SERIAL_MAGIC; - info->line = i; - info->flags = state->flags; - INIT_WORK(&info->tqueue, do_softint, info); - INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info); - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - info->state = state; - state->info = (struct async_struct *)info; - - /* We need to allocate a transmit and receive buffer - * descriptors from dual port ram, and a character - * buffer area from host mem. - */ - dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * RX_NUM_FIFO); - - /* Allocate space for FIFOs in the host memory. - * (for now this is from a static array of buffers :( - */ - /* mem_addr = m360_cpm_hostalloc(RX_NUM_FIFO * RX_BUF_SIZE); */ - /* mem_addr = kmalloc (RX_NUM_FIFO * RX_BUF_SIZE, GFP_BUFFER); */ - mem_addr = &rx_buf_pool[i * RX_NUM_FIFO * RX_BUF_SIZE]; - - /* Set the physical address of the host memory - * buffers in the buffer descriptors, and the - * virtual address for us to work with. - */ - bdp = (QUICC_BD *)((uint)pquicc + dp_addr); - info->rx_cur = info->rx_bd_base = bdp; - - /* initialize rx buffer descriptors */ - for (j=0; j<(RX_NUM_FIFO-1); j++) { - bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE]; - bdp->status = BD_SC_EMPTY | BD_SC_INTRPT; - mem_addr += RX_BUF_SIZE; - bdp++; - } - bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE]; - bdp->status = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT; - - - idx = PORT_NUM(info->state->smc_scc_num); - if (info->state->smc_scc_num & NUM_IS_SCC) { - -#if defined (CONFIG_UCQUICC) && 1 - /* set the transceiver mode to RS232 */ - sipex_mode_bits &= ~(uint)SIPEX_MODE(idx,0x0f); /* clear current mode */ - sipex_mode_bits |= (uint)SIPEX_MODE(idx,0x02); - *(uint *)_periph_base = sipex_mode_bits; - /* printk ("sipex bits = 0x%08x\n", sipex_mode_bits); */ -#endif - } - - dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * TX_NUM_FIFO); - - /* Allocate space for FIFOs in the host memory. - */ - /* mem_addr = m360_cpm_hostalloc(TX_NUM_FIFO * TX_BUF_SIZE); */ - /* mem_addr = kmalloc (TX_NUM_FIFO * TX_BUF_SIZE, GFP_BUFFER); */ - mem_addr = &tx_buf_pool[i * TX_NUM_FIFO * TX_BUF_SIZE]; - - /* Set the physical address of the host memory - * buffers in the buffer descriptors, and the - * virtual address for us to work with. - */ - /* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */ - bdp = (QUICC_BD *)((uint)pquicc + dp_addr); - info->tx_cur = info->tx_bd_base = (QUICC_BD *)bdp; - - /* initialize tx buffer descriptors */ - for (j=0; j<(TX_NUM_FIFO-1); j++) { - bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE]; - bdp->status = BD_SC_INTRPT; - mem_addr += TX_BUF_SIZE; - bdp++; - } - bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE]; - bdp->status = (BD_SC_WRAP | BD_SC_INTRPT); - - if (info->state->smc_scc_num & NUM_IS_SCC) { - scp = &pquicc->scc_regs[idx]; - sup = &pquicc->pram[info->state->port].scc.pscc.u; - sup->rbase = dp_addr; - sup->tbase = dp_addr; - - /* Set up the uart parameters in the - * parameter ram. - */ - sup->rfcr = SMC_EB; - sup->tfcr = SMC_EB; - - /* Set this to 1 for now, so we get single - * character interrupts. Using idle character - * time requires some additional tuning. - */ - sup->mrblr = 1; - sup->max_idl = 0; - sup->brkcr = 1; - sup->parec = 0; - sup->frmer = 0; - sup->nosec = 0; - sup->brkec = 0; - sup->uaddr1 = 0; - sup->uaddr2 = 0; - sup->toseq = 0; - { - int i; - for (i=0;i<8;i++) - sup->cc[i] = 0x8000; - } - sup->rccm = 0xc0ff; - - /* Send the CPM an initialize command. - */ - chan = scc_chan_map[idx]; - - /* execute the INIT RX & TX PARAMS command for this channel. */ - cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cr & CPM_CR_FLG); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - scp->scc_gsmr.w.high = 0; - scp->scc_gsmr.w.low = - (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); - - /* Disable all interrupts and clear all pending - * events. - */ - scp->scc_sccm = 0; - scp->scc_scce = 0xffff; - scp->scc_dsr = 0x7e7e; - scp->scc_psmr = 0x3000; - - /* If the port is the console, enable Rx and Tx. - */ -#ifdef CONFIG_SERIAL_CONSOLE - if (i == CONFIG_SERIAL_CONSOLE_PORT) - scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); -#endif - } - else { - /* Configure SMCs Tx/Rx instead of port B - * parallel I/O. - */ - up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; - up->rbase = dp_addr; - - iobits = 0xc0 << (idx * 4); - cp->pip_pbpar |= iobits; - cp->pip_pbdir &= ~iobits; - cp->pip_pbodr &= ~iobits; - - - /* Connect the baud rate generator to the - * SMC based upon index in rs_table. Also - * make sure it is connected to NMSI. - */ - cp->si_simode &= ~(0xffff << (idx * 16)); - cp->si_simode |= (i << ((idx * 16) + 12)); - - up->tbase = dp_addr; - - /* Set up the uart parameters in the - * parameter ram. - */ - up->rfcr = SMC_EB; - up->tfcr = SMC_EB; - - /* Set this to 1 for now, so we get single - * character interrupts. Using idle character - * time requires some additional tuning. - */ - up->mrblr = 1; - up->max_idl = 0; - up->brkcr = 1; - - /* Send the CPM an initialize command. - */ - chan = smc_chan_map[idx]; - - cp->cp_cr = mk_cr_cmd(chan, - CPM_CR_INIT_TRX) | CPM_CR_FLG; -#ifdef CONFIG_SERIAL_CONSOLE - if (i == CONFIG_SERIAL_CONSOLE_PORT) - printk(""); -#endif - while (cp->cp_cr & CPM_CR_FLG); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sp = &cp->smc_regs[idx]; - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; - - /* Disable all interrupts and clear all pending - * events. - */ - sp->smc_smcm = 0; - sp->smc_smce = 0xff; - - /* If the port is the console, enable Rx and Tx. - */ -#ifdef CONFIG_SERIAL_CONSOLE - if (i == CONFIG_SERIAL_CONSOLE_PORT) - sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; -#endif - } - - /* Install interrupt handler. - */ - /* cpm_install_handler(IRQ_MACHSPEC | state->irq, rs_360_interrupt, info); */ - /*request_irq(IRQ_MACHSPEC | state->irq, rs_360_interrupt, */ - request_irq(state->irq, rs_360_interrupt, - IRQ_FLG_LOCK, "ttyS", (void *)info); - - /* Set up the baud rate generator. - */ - m360_cpm_setbrg(i, baud_table[baud_idx]); - - } - } - - return 0; -} -module_init(rs_360_init); - -/* This must always be called before the rs_360_init() function, otherwise - * it blows away the port control information. - */ -//static int __init serial_console_setup( struct console *co, char *options) -int serial_console_setup( struct console *co, char *options) -{ - struct serial_state *ser; - uint mem_addr, dp_addr, bidx, idx, iobits; - ushort chan; - QUICC_BD *bdp; - volatile QUICC *cp; - volatile struct smc_regs *sp; - volatile struct scc_regs *scp; - volatile struct smc_uart_pram *up; - volatile struct uart_pram *sup; - -/* mleslie TODO: - * add something to the 68k bootloader to store a desired initial console baud rate */ - -/* bd_t *bd; */ /* a board info struct used by EPPC-bug */ -/* bd = (bd_t *)__res; */ - - for (bidx = 0; bidx < (sizeof(baud_table) / sizeof(int)); bidx++) - /* if (bd->bi_baudrate == baud_table[bidx]) */ - if (CONSOLE_BAUDRATE == baud_table[bidx]) - break; - - /* co->cflag = CREAD|CLOCAL|bidx|CS8; */ - baud_idx = bidx; - - ser = rs_table + CONFIG_SERIAL_CONSOLE_PORT; - - cp = pquicc; /* Get pointer to Communication Processor */ - - idx = PORT_NUM(ser->smc_scc_num); - if (ser->smc_scc_num & NUM_IS_SCC) { - - /* TODO: need to set up SCC pin assignment etc. here */ - - } - else { - iobits = 0xc0 << (idx * 4); - cp->pip_pbpar |= iobits; - cp->pip_pbdir &= ~iobits; - cp->pip_pbodr &= ~iobits; - - /* Connect the baud rate generator to the - * SMC based upon index in rs_table. Also - * make sure it is connected to NMSI. - */ - cp->si_simode &= ~(0xffff << (idx * 16)); - cp->si_simode |= (idx << ((idx * 16) + 12)); - } - - /* When we get here, the CPM has been reset, so we need - * to configure the port. - * We need to allocate a transmit and receive buffer descriptor - * from dual port ram, and a character buffer area from host mem. - */ - - /* Allocate space for two buffer descriptors in the DP ram. - */ - dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * CONSOLE_NUM_FIFO); - - /* Allocate space for two 2 byte FIFOs in the host memory. - */ - /* mem_addr = m360_cpm_hostalloc(8); */ - mem_addr = (uint)console_fifos; - - - /* Set the physical address of the host memory buffers in - * the buffer descriptors. - */ - /* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */ - bdp = (QUICC_BD *)((uint)pquicc + dp_addr); - bdp->buf = (char *)mem_addr; - (bdp+1)->buf = (char *)(mem_addr+4); - - /* For the receive, set empty and wrap. - * For transmit, set wrap. - */ - bdp->status = BD_SC_EMPTY | BD_SC_WRAP; - (bdp+1)->status = BD_SC_WRAP; - - /* Set up the uart parameters in the parameter ram. - */ - if (ser->smc_scc_num & NUM_IS_SCC) { - scp = &cp->scc_regs[idx]; - /* sup = (scc_uart_t *)&cp->cp_dparam[ser->port]; */ - sup = &pquicc->pram[ser->port].scc.pscc.u; - - sup->rbase = dp_addr; - sup->tbase = dp_addr + sizeof(QUICC_BD); - - /* Set up the uart parameters in the - * parameter ram. - */ - sup->rfcr = SMC_EB; - sup->tfcr = SMC_EB; - - /* Set this to 1 for now, so we get single - * character interrupts. Using idle character - * time requires some additional tuning. - */ - sup->mrblr = 1; - sup->max_idl = 0; - sup->brkcr = 1; - sup->parec = 0; - sup->frmer = 0; - sup->nosec = 0; - sup->brkec = 0; - sup->uaddr1 = 0; - sup->uaddr2 = 0; - sup->toseq = 0; - { - int i; - for (i=0;i<8;i++) - sup->cc[i] = 0x8000; - } - sup->rccm = 0xc0ff; - - /* Send the CPM an initialize command. - */ - chan = scc_chan_map[idx]; - - cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cr & CPM_CR_FLG); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - scp->scc_gsmr.w.high = 0; - scp->scc_gsmr.w.low = - (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); - - /* Disable all interrupts and clear all pending - * events. - */ - scp->scc_sccm = 0; - scp->scc_scce = 0xffff; - scp->scc_dsr = 0x7e7e; - scp->scc_psmr = 0x3000; - - scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); - - } - else { - /* up = (smc_uart_t *)&cp->cp_dparam[ser->port]; */ - up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u; - - up->rbase = dp_addr; /* Base of receive buffer desc. */ - up->tbase = dp_addr+sizeof(QUICC_BD); /* Base of xmt buffer desc. */ - up->rfcr = SMC_EB; - up->tfcr = SMC_EB; - - /* Set this to 1 for now, so we get single character interrupts. - */ - up->mrblr = 1; /* receive buffer length */ - up->max_idl = 0; /* wait forever for next char */ - - /* Send the CPM an initialize command. - */ - chan = smc_chan_map[idx]; - cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cr & CPM_CR_FLG); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - sp = &cp->smc_regs[idx]; - sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; - - /* And finally, enable Rx and Tx. - */ - sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; - } - - /* Set up the baud rate generator. - */ - /* m360_cpm_setbrg((ser - rs_table), bd->bi_baudrate); */ - m360_cpm_setbrg((ser - rs_table), CONSOLE_BAUDRATE); - - return 0; -} - -/* - * Local variables: - * c-indent-level: 4 - * c-basic-offset: 4 - * tab-width: 4 - * End: - */ diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c deleted file mode 100644 index b25e6e490530..000000000000 --- a/drivers/serial/8250.c +++ /dev/null @@ -1,3377 +0,0 @@ -/* - * linux/drivers/char/8250.c - * - * Driver for 8250/16550-type serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright (C) 2001 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * A note about mapbase / membase - * - * mapbase is the physical address of the IO port. - * membase is an 'ioremapped' cookie. - */ - -#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "8250.h" - -#ifdef CONFIG_SPARC -#include "suncore.h" -#endif - -/* - * Configuration: - * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option - * is unsafe when used on edge-triggered interrupts. - */ -static unsigned int share_irqs = SERIAL8250_SHARE_IRQS; - -static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; - -static struct uart_driver serial8250_reg; - -static int serial_index(struct uart_port *port) -{ - return (serial8250_reg.minor - 64) + port->line; -} - -static unsigned int skip_txen_test; /* force skip of txen test at init time */ - -/* - * Debugging. - */ -#if 0 -#define DEBUG_AUTOCONF(fmt...) printk(fmt) -#else -#define DEBUG_AUTOCONF(fmt...) do { } while (0) -#endif - -#if 0 -#define DEBUG_INTR(fmt...) printk(fmt) -#else -#define DEBUG_INTR(fmt...) do { } while (0) -#endif - -#define PASS_LIMIT 256 - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - - -/* - * We default to IRQ0 for the "no irq" hack. Some - * machine types want others as well - they're free - * to redefine this in their header file. - */ -#define is_real_interrupt(irq) ((irq) != 0) - -#ifdef CONFIG_SERIAL_8250_DETECT_IRQ -#define CONFIG_SERIAL_DETECT_IRQ 1 -#endif -#ifdef CONFIG_SERIAL_8250_MANY_PORTS -#define CONFIG_SERIAL_MANY_PORTS 1 -#endif - -/* - * HUB6 is always on. This will be removed once the header - * files have been cleaned. - */ -#define CONFIG_HUB6 1 - -#include -/* - * SERIAL_PORT_DFNS tells us about built-in ports that have no - * standard enumeration mechanism. Platforms that can find all - * serial ports via mechanisms like ACPI or PCI need not supply it. - */ -#ifndef SERIAL_PORT_DFNS -#define SERIAL_PORT_DFNS -#endif - -static const struct old_serial_port old_serial_port[] = { - SERIAL_PORT_DFNS /* defined in asm/serial.h */ -}; - -#define UART_NR CONFIG_SERIAL_8250_NR_UARTS - -#ifdef CONFIG_SERIAL_8250_RSA - -#define PORT_RSA_MAX 4 -static unsigned long probe_rsa[PORT_RSA_MAX]; -static unsigned int probe_rsa_count; -#endif /* CONFIG_SERIAL_8250_RSA */ - -struct uart_8250_port { - struct uart_port port; - struct timer_list timer; /* "no irq" timer */ - struct list_head list; /* ports on this IRQ */ - unsigned short capabilities; /* port capabilities */ - unsigned short bugs; /* port bugs */ - unsigned int tx_loadsz; /* transmit fifo load size */ - unsigned char acr; - unsigned char ier; - unsigned char lcr; - unsigned char mcr; - unsigned char mcr_mask; /* mask of user bits */ - unsigned char mcr_force; /* mask of forced bits */ - unsigned char cur_iotype; /* Running I/O type */ - - /* - * Some bits in registers are cleared on a read, so they must - * be saved whenever the register is read but the bits will not - * be immediately processed. - */ -#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS - unsigned char lsr_saved_flags; -#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA - unsigned char msr_saved_flags; -}; - -struct irq_info { - struct hlist_node node; - int irq; - spinlock_t lock; /* Protects list not the hash */ - struct list_head *head; -}; - -#define NR_IRQ_HASH 32 /* Can be adjusted later */ -static struct hlist_head irq_lists[NR_IRQ_HASH]; -static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */ - -/* - * Here we define the default xmit fifo size used for each type of UART. - */ -static const struct serial8250_config uart_config[] = { - [PORT_UNKNOWN] = { - .name = "unknown", - .fifo_size = 1, - .tx_loadsz = 1, - }, - [PORT_8250] = { - .name = "8250", - .fifo_size = 1, - .tx_loadsz = 1, - }, - [PORT_16450] = { - .name = "16450", - .fifo_size = 1, - .tx_loadsz = 1, - }, - [PORT_16550] = { - .name = "16550", - .fifo_size = 1, - .tx_loadsz = 1, - }, - [PORT_16550A] = { - .name = "16550A", - .fifo_size = 16, - .tx_loadsz = 16, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, - [PORT_CIRRUS] = { - .name = "Cirrus", - .fifo_size = 1, - .tx_loadsz = 1, - }, - [PORT_16650] = { - .name = "ST16650", - .fifo_size = 1, - .tx_loadsz = 1, - .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, - }, - [PORT_16650V2] = { - .name = "ST16650V2", - .fifo_size = 32, - .tx_loadsz = 16, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | - UART_FCR_T_TRIG_00, - .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, - }, - [PORT_16750] = { - .name = "TI16750", - .fifo_size = 64, - .tx_loadsz = 64, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | - UART_FCR7_64BYTE, - .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE, - }, - [PORT_STARTECH] = { - .name = "Startech", - .fifo_size = 1, - .tx_loadsz = 1, - }, - [PORT_16C950] = { - .name = "16C950/954", - .fifo_size = 128, - .tx_loadsz = 128, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, - }, - [PORT_16654] = { - .name = "ST16654", - .fifo_size = 64, - .tx_loadsz = 32, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | - UART_FCR_T_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, - }, - [PORT_16850] = { - .name = "XR16850", - .fifo_size = 128, - .tx_loadsz = 128, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, - }, - [PORT_RSA] = { - .name = "RSA", - .fifo_size = 2048, - .tx_loadsz = 2048, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11, - .flags = UART_CAP_FIFO, - }, - [PORT_NS16550A] = { - .name = "NS16550A", - .fifo_size = 16, - .tx_loadsz = 16, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_NATSEMI, - }, - [PORT_XSCALE] = { - .name = "XScale", - .fifo_size = 32, - .tx_loadsz = 32, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_UUE, - }, - [PORT_RM9000] = { - .name = "RM9000", - .fifo_size = 16, - .tx_loadsz = 16, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, - [PORT_OCTEON] = { - .name = "OCTEON", - .fifo_size = 64, - .tx_loadsz = 64, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, - [PORT_AR7] = { - .name = "AR7", - .fifo_size = 16, - .tx_loadsz = 16, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, - .flags = UART_CAP_FIFO | UART_CAP_AFE, - }, - [PORT_U6_16550A] = { - .name = "U6_16550A", - .fifo_size = 64, - .tx_loadsz = 64, - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_AFE, - }, -}; - -#if defined(CONFIG_MIPS_ALCHEMY) - -/* Au1x00 UART hardware has a weird register layout */ -static const u8 au_io_in_map[] = { - [UART_RX] = 0, - [UART_IER] = 2, - [UART_IIR] = 3, - [UART_LCR] = 5, - [UART_MCR] = 6, - [UART_LSR] = 7, - [UART_MSR] = 8, -}; - -static const u8 au_io_out_map[] = { - [UART_TX] = 1, - [UART_IER] = 2, - [UART_FCR] = 4, - [UART_LCR] = 5, - [UART_MCR] = 6, -}; - -/* sane hardware needs no mapping */ -static inline int map_8250_in_reg(struct uart_port *p, int offset) -{ - if (p->iotype != UPIO_AU) - return offset; - return au_io_in_map[offset]; -} - -static inline int map_8250_out_reg(struct uart_port *p, int offset) -{ - if (p->iotype != UPIO_AU) - return offset; - return au_io_out_map[offset]; -} - -#elif defined(CONFIG_SERIAL_8250_RM9K) - -static const u8 - regmap_in[8] = { - [UART_RX] = 0x00, - [UART_IER] = 0x0c, - [UART_IIR] = 0x14, - [UART_LCR] = 0x1c, - [UART_MCR] = 0x20, - [UART_LSR] = 0x24, - [UART_MSR] = 0x28, - [UART_SCR] = 0x2c - }, - regmap_out[8] = { - [UART_TX] = 0x04, - [UART_IER] = 0x0c, - [UART_FCR] = 0x18, - [UART_LCR] = 0x1c, - [UART_MCR] = 0x20, - [UART_LSR] = 0x24, - [UART_MSR] = 0x28, - [UART_SCR] = 0x2c - }; - -static inline int map_8250_in_reg(struct uart_port *p, int offset) -{ - if (p->iotype != UPIO_RM9000) - return offset; - return regmap_in[offset]; -} - -static inline int map_8250_out_reg(struct uart_port *p, int offset) -{ - if (p->iotype != UPIO_RM9000) - return offset; - return regmap_out[offset]; -} - -#else - -/* sane hardware needs no mapping */ -#define map_8250_in_reg(up, offset) (offset) -#define map_8250_out_reg(up, offset) (offset) - -#endif - -static unsigned int hub6_serial_in(struct uart_port *p, int offset) -{ - offset = map_8250_in_reg(p, offset) << p->regshift; - outb(p->hub6 - 1 + offset, p->iobase); - return inb(p->iobase + 1); -} - -static void hub6_serial_out(struct uart_port *p, int offset, int value) -{ - offset = map_8250_out_reg(p, offset) << p->regshift; - outb(p->hub6 - 1 + offset, p->iobase); - outb(value, p->iobase + 1); -} - -static unsigned int mem_serial_in(struct uart_port *p, int offset) -{ - offset = map_8250_in_reg(p, offset) << p->regshift; - return readb(p->membase + offset); -} - -static void mem_serial_out(struct uart_port *p, int offset, int value) -{ - offset = map_8250_out_reg(p, offset) << p->regshift; - writeb(value, p->membase + offset); -} - -static void mem32_serial_out(struct uart_port *p, int offset, int value) -{ - offset = map_8250_out_reg(p, offset) << p->regshift; - writel(value, p->membase + offset); -} - -static unsigned int mem32_serial_in(struct uart_port *p, int offset) -{ - offset = map_8250_in_reg(p, offset) << p->regshift; - return readl(p->membase + offset); -} - -static unsigned int au_serial_in(struct uart_port *p, int offset) -{ - offset = map_8250_in_reg(p, offset) << p->regshift; - return __raw_readl(p->membase + offset); -} - -static void au_serial_out(struct uart_port *p, int offset, int value) -{ - offset = map_8250_out_reg(p, offset) << p->regshift; - __raw_writel(value, p->membase + offset); -} - -static unsigned int tsi_serial_in(struct uart_port *p, int offset) -{ - unsigned int tmp; - offset = map_8250_in_reg(p, offset) << p->regshift; - if (offset == UART_IIR) { - tmp = readl(p->membase + (UART_IIR & ~3)); - return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ - } else - return readb(p->membase + offset); -} - -static void tsi_serial_out(struct uart_port *p, int offset, int value) -{ - offset = map_8250_out_reg(p, offset) << p->regshift; - if (!((offset == UART_IER) && (value & UART_IER_UUE))) - writeb(value, p->membase + offset); -} - -/* Save the LCR value so it can be re-written when a Busy Detect IRQ occurs. */ -static inline void dwapb_save_out_value(struct uart_port *p, int offset, - int value) -{ - struct uart_8250_port *up = - container_of(p, struct uart_8250_port, port); - - if (offset == UART_LCR) - up->lcr = value; -} - -/* Read the IER to ensure any interrupt is cleared before returning from ISR. */ -static inline void dwapb_check_clear_ier(struct uart_port *p, int offset) -{ - if (offset == UART_TX || offset == UART_IER) - p->serial_in(p, UART_IER); -} - -static void dwapb_serial_out(struct uart_port *p, int offset, int value) -{ - int save_offset = offset; - offset = map_8250_out_reg(p, offset) << p->regshift; - dwapb_save_out_value(p, save_offset, value); - writeb(value, p->membase + offset); - dwapb_check_clear_ier(p, save_offset); -} - -static void dwapb32_serial_out(struct uart_port *p, int offset, int value) -{ - int save_offset = offset; - offset = map_8250_out_reg(p, offset) << p->regshift; - dwapb_save_out_value(p, save_offset, value); - writel(value, p->membase + offset); - dwapb_check_clear_ier(p, save_offset); -} - -static unsigned int io_serial_in(struct uart_port *p, int offset) -{ - offset = map_8250_in_reg(p, offset) << p->regshift; - return inb(p->iobase + offset); -} - -static void io_serial_out(struct uart_port *p, int offset, int value) -{ - offset = map_8250_out_reg(p, offset) << p->regshift; - outb(value, p->iobase + offset); -} - -static void set_io_from_upio(struct uart_port *p) -{ - struct uart_8250_port *up = - container_of(p, struct uart_8250_port, port); - switch (p->iotype) { - case UPIO_HUB6: - p->serial_in = hub6_serial_in; - p->serial_out = hub6_serial_out; - break; - - case UPIO_MEM: - p->serial_in = mem_serial_in; - p->serial_out = mem_serial_out; - break; - - case UPIO_RM9000: - case UPIO_MEM32: - p->serial_in = mem32_serial_in; - p->serial_out = mem32_serial_out; - break; - - case UPIO_AU: - p->serial_in = au_serial_in; - p->serial_out = au_serial_out; - break; - - case UPIO_TSI: - p->serial_in = tsi_serial_in; - p->serial_out = tsi_serial_out; - break; - - case UPIO_DWAPB: - p->serial_in = mem_serial_in; - p->serial_out = dwapb_serial_out; - break; - - case UPIO_DWAPB32: - p->serial_in = mem32_serial_in; - p->serial_out = dwapb32_serial_out; - break; - - default: - p->serial_in = io_serial_in; - p->serial_out = io_serial_out; - break; - } - /* Remember loaded iotype */ - up->cur_iotype = p->iotype; -} - -static void -serial_out_sync(struct uart_8250_port *up, int offset, int value) -{ - struct uart_port *p = &up->port; - switch (p->iotype) { - case UPIO_MEM: - case UPIO_MEM32: - case UPIO_AU: - case UPIO_DWAPB: - case UPIO_DWAPB32: - p->serial_out(p, offset, value); - p->serial_in(p, UART_LCR); /* safe, no side-effects */ - break; - default: - p->serial_out(p, offset, value); - } -} - -#define serial_in(up, offset) \ - (up->port.serial_in(&(up)->port, (offset))) -#define serial_out(up, offset, value) \ - (up->port.serial_out(&(up)->port, (offset), (value))) -/* - * We used to support using pause I/O for certain machines. We - * haven't supported this for a while, but just in case it's badly - * needed for certain old 386 machines, I've left these #define's - * in.... - */ -#define serial_inp(up, offset) serial_in(up, offset) -#define serial_outp(up, offset, value) serial_out(up, offset, value) - -/* Uart divisor latch read */ -static inline int _serial_dl_read(struct uart_8250_port *up) -{ - return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8; -} - -/* Uart divisor latch write */ -static inline void _serial_dl_write(struct uart_8250_port *up, int value) -{ - serial_outp(up, UART_DLL, value & 0xff); - serial_outp(up, UART_DLM, value >> 8 & 0xff); -} - -#if defined(CONFIG_MIPS_ALCHEMY) -/* Au1x00 haven't got a standard divisor latch */ -static int serial_dl_read(struct uart_8250_port *up) -{ - if (up->port.iotype == UPIO_AU) - return __raw_readl(up->port.membase + 0x28); - else - return _serial_dl_read(up); -} - -static void serial_dl_write(struct uart_8250_port *up, int value) -{ - if (up->port.iotype == UPIO_AU) - __raw_writel(value, up->port.membase + 0x28); - else - _serial_dl_write(up, value); -} -#elif defined(CONFIG_SERIAL_8250_RM9K) -static int serial_dl_read(struct uart_8250_port *up) -{ - return (up->port.iotype == UPIO_RM9000) ? - (((__raw_readl(up->port.membase + 0x10) << 8) | - (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff) : - _serial_dl_read(up); -} - -static void serial_dl_write(struct uart_8250_port *up, int value) -{ - if (up->port.iotype == UPIO_RM9000) { - __raw_writel(value, up->port.membase + 0x08); - __raw_writel(value >> 8, up->port.membase + 0x10); - } else { - _serial_dl_write(up, value); - } -} -#else -#define serial_dl_read(up) _serial_dl_read(up) -#define serial_dl_write(up, value) _serial_dl_write(up, value) -#endif - -/* - * For the 16C950 - */ -static void serial_icr_write(struct uart_8250_port *up, int offset, int value) -{ - serial_out(up, UART_SCR, offset); - serial_out(up, UART_ICR, value); -} - -static unsigned int serial_icr_read(struct uart_8250_port *up, int offset) -{ - unsigned int value; - - serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); - serial_out(up, UART_SCR, offset); - value = serial_in(up, UART_ICR); - serial_icr_write(up, UART_ACR, up->acr); - - return value; -} - -/* - * FIFO support. - */ -static void serial8250_clear_fifos(struct uart_8250_port *p) -{ - if (p->capabilities & UART_CAP_FIFO) { - serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - serial_outp(p, UART_FCR, 0); - } -} - -/* - * IER sleep support. UARTs which have EFRs need the "extended - * capability" bit enabled. Note that on XR16C850s, we need to - * reset LCR to write to IER. - */ -static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) -{ - if (p->capabilities & UART_CAP_SLEEP) { - if (p->capabilities & UART_CAP_EFR) { - serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B); - serial_outp(p, UART_EFR, UART_EFR_ECB); - serial_outp(p, UART_LCR, 0); - } - serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0); - if (p->capabilities & UART_CAP_EFR) { - serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B); - serial_outp(p, UART_EFR, 0); - serial_outp(p, UART_LCR, 0); - } - } -} - -#ifdef CONFIG_SERIAL_8250_RSA -/* - * Attempts to turn on the RSA FIFO. Returns zero on failure. - * We set the port uart clock rate if we succeed. - */ -static int __enable_rsa(struct uart_8250_port *up) -{ - unsigned char mode; - int result; - - mode = serial_inp(up, UART_RSA_MSR); - result = mode & UART_RSA_MSR_FIFO; - - if (!result) { - serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); - mode = serial_inp(up, UART_RSA_MSR); - result = mode & UART_RSA_MSR_FIFO; - } - - if (result) - up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; - - return result; -} - -static void enable_rsa(struct uart_8250_port *up) -{ - if (up->port.type == PORT_RSA) { - if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { - spin_lock_irq(&up->port.lock); - __enable_rsa(up); - spin_unlock_irq(&up->port.lock); - } - if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) - serial_outp(up, UART_RSA_FRR, 0); - } -} - -/* - * Attempts to turn off the RSA FIFO. Returns zero on failure. - * It is unknown why interrupts were disabled in here. However, - * the caller is expected to preserve this behaviour by grabbing - * the spinlock before calling this function. - */ -static void disable_rsa(struct uart_8250_port *up) -{ - unsigned char mode; - int result; - - if (up->port.type == PORT_RSA && - up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { - spin_lock_irq(&up->port.lock); - - mode = serial_inp(up, UART_RSA_MSR); - result = !(mode & UART_RSA_MSR_FIFO); - - if (!result) { - serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); - mode = serial_inp(up, UART_RSA_MSR); - result = !(mode & UART_RSA_MSR_FIFO); - } - - if (result) - up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; - spin_unlock_irq(&up->port.lock); - } -} -#endif /* CONFIG_SERIAL_8250_RSA */ - -/* - * This is a quickie test to see how big the FIFO is. - * It doesn't work at all the time, more's the pity. - */ -static int size_fifo(struct uart_8250_port *up) -{ - unsigned char old_fcr, old_mcr, old_lcr; - unsigned short old_dl; - int count; - - old_lcr = serial_inp(up, UART_LCR); - serial_outp(up, UART_LCR, 0); - old_fcr = serial_inp(up, UART_FCR); - old_mcr = serial_inp(up, UART_MCR); - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - serial_outp(up, UART_MCR, UART_MCR_LOOP); - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); - old_dl = serial_dl_read(up); - serial_dl_write(up, 0x0001); - serial_outp(up, UART_LCR, 0x03); - for (count = 0; count < 256; count++) - serial_outp(up, UART_TX, count); - mdelay(20);/* FIXME - schedule_timeout */ - for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) && - (count < 256); count++) - serial_inp(up, UART_RX); - serial_outp(up, UART_FCR, old_fcr); - serial_outp(up, UART_MCR, old_mcr); - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_dl_write(up, old_dl); - serial_outp(up, UART_LCR, old_lcr); - - return count; -} - -/* - * Read UART ID using the divisor method - set DLL and DLM to zero - * and the revision will be in DLL and device type in DLM. We - * preserve the device state across this. - */ -static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p) -{ - unsigned char old_dll, old_dlm, old_lcr; - unsigned int id; - - old_lcr = serial_inp(p, UART_LCR); - serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_A); - - old_dll = serial_inp(p, UART_DLL); - old_dlm = serial_inp(p, UART_DLM); - - serial_outp(p, UART_DLL, 0); - serial_outp(p, UART_DLM, 0); - - id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8; - - serial_outp(p, UART_DLL, old_dll); - serial_outp(p, UART_DLM, old_dlm); - serial_outp(p, UART_LCR, old_lcr); - - return id; -} - -/* - * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's. - * When this function is called we know it is at least a StarTech - * 16650 V2, but it might be one of several StarTech UARTs, or one of - * its clones. (We treat the broken original StarTech 16650 V1 as a - * 16550, and why not? Startech doesn't seem to even acknowledge its - * existence.) - * - * What evil have men's minds wrought... - */ -static void autoconfig_has_efr(struct uart_8250_port *up) -{ - unsigned int id1, id2, id3, rev; - - /* - * Everything with an EFR has SLEEP - */ - up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; - - /* - * First we check to see if it's an Oxford Semiconductor UART. - * - * If we have to do this here because some non-National - * Semiconductor clone chips lock up if you try writing to the - * LSR register (which serial_icr_read does) - */ - - /* - * Check for Oxford Semiconductor 16C950. - * - * EFR [4] must be set else this test fails. - * - * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca) - * claims that it's needed for 952 dual UART's (which are not - * recommended for new designs). - */ - up->acr = 0; - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_EFR, UART_EFR_ECB); - serial_out(up, UART_LCR, 0x00); - id1 = serial_icr_read(up, UART_ID1); - id2 = serial_icr_read(up, UART_ID2); - id3 = serial_icr_read(up, UART_ID3); - rev = serial_icr_read(up, UART_REV); - - DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev); - - if (id1 == 0x16 && id2 == 0xC9 && - (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) { - up->port.type = PORT_16C950; - - /* - * Enable work around for the Oxford Semiconductor 952 rev B - * chip which causes it to seriously miscalculate baud rates - * when DLL is 0. - */ - if (id3 == 0x52 && rev == 0x01) - up->bugs |= UART_BUG_QUOT; - return; - } - - /* - * We check for a XR16C850 by setting DLL and DLM to 0, and then - * reading back DLL and DLM. The chip type depends on the DLM - * value read back: - * 0x10 - XR16C850 and the DLL contains the chip revision. - * 0x12 - XR16C2850. - * 0x14 - XR16C854. - */ - id1 = autoconfig_read_divisor_id(up); - DEBUG_AUTOCONF("850id=%04x ", id1); - - id2 = id1 >> 8; - if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) { - up->port.type = PORT_16850; - return; - } - - /* - * It wasn't an XR16C850. - * - * We distinguish between the '654 and the '650 by counting - * how many bytes are in the FIFO. I'm using this for now, - * since that's the technique that was sent to me in the - * serial driver update, but I'm not convinced this works. - * I've had problems doing this in the past. -TYT - */ - if (size_fifo(up) == 64) - up->port.type = PORT_16654; - else - up->port.type = PORT_16650V2; -} - -/* - * We detected a chip without a FIFO. Only two fall into - * this category - the original 8250 and the 16450. The - * 16450 has a scratch register (accessible with LCR=0) - */ -static void autoconfig_8250(struct uart_8250_port *up) -{ - unsigned char scratch, status1, status2; - - up->port.type = PORT_8250; - - scratch = serial_in(up, UART_SCR); - serial_outp(up, UART_SCR, 0xa5); - status1 = serial_in(up, UART_SCR); - serial_outp(up, UART_SCR, 0x5a); - status2 = serial_in(up, UART_SCR); - serial_outp(up, UART_SCR, scratch); - - if (status1 == 0xa5 && status2 == 0x5a) - up->port.type = PORT_16450; -} - -static int broken_efr(struct uart_8250_port *up) -{ - /* - * Exar ST16C2550 "A2" devices incorrectly detect as - * having an EFR, and report an ID of 0x0201. See - * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html - */ - if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) - return 1; - - return 0; -} - -/* - * We know that the chip has FIFOs. Does it have an EFR? The - * EFR is located in the same register position as the IIR and - * we know the top two bits of the IIR are currently set. The - * EFR should contain zero. Try to read the EFR. - */ -static void autoconfig_16550a(struct uart_8250_port *up) -{ - unsigned char status1, status2; - unsigned int iersave; - - up->port.type = PORT_16550A; - up->capabilities |= UART_CAP_FIFO; - - /* - * Check for presence of the EFR when DLAB is set. - * Only ST16C650V1 UARTs pass this test. - */ - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); - if (serial_in(up, UART_EFR) == 0) { - serial_outp(up, UART_EFR, 0xA8); - if (serial_in(up, UART_EFR) != 0) { - DEBUG_AUTOCONF("EFRv1 "); - up->port.type = PORT_16650; - up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; - } else { - DEBUG_AUTOCONF("Motorola 8xxx DUART "); - } - serial_outp(up, UART_EFR, 0); - return; - } - - /* - * Maybe it requires 0xbf to be written to the LCR. - * (other ST16C650V2 UARTs, TI16C752A, etc) - */ - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); - if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) { - DEBUG_AUTOCONF("EFRv2 "); - autoconfig_has_efr(up); - return; - } - - /* - * Check for a National Semiconductor SuperIO chip. - * Attempt to switch to bank 2, read the value of the LOOP bit - * from EXCR1. Switch back to bank 0, change it in MCR. Then - * switch back to bank 2, read it from EXCR1 again and check - * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2 - */ - serial_outp(up, UART_LCR, 0); - status1 = serial_in(up, UART_MCR); - serial_outp(up, UART_LCR, 0xE0); - status2 = serial_in(up, 0x02); /* EXCR1 */ - - if (!((status2 ^ status1) & UART_MCR_LOOP)) { - serial_outp(up, UART_LCR, 0); - serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP); - serial_outp(up, UART_LCR, 0xE0); - status2 = serial_in(up, 0x02); /* EXCR1 */ - serial_outp(up, UART_LCR, 0); - serial_outp(up, UART_MCR, status1); - - if ((status2 ^ status1) & UART_MCR_LOOP) { - unsigned short quot; - - serial_outp(up, UART_LCR, 0xE0); - - quot = serial_dl_read(up); - quot <<= 3; - - status1 = serial_in(up, 0x04); /* EXCR2 */ - status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ - status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ - serial_outp(up, 0x04, status1); - - serial_dl_write(up, quot); - - serial_outp(up, UART_LCR, 0); - - up->port.uartclk = 921600*16; - up->port.type = PORT_NS16550A; - up->capabilities |= UART_NATSEMI; - return; - } - } - - /* - * No EFR. Try to detect a TI16750, which only sets bit 5 of - * the IIR when 64 byte FIFO mode is enabled when DLAB is set. - * Try setting it with and without DLAB set. Cheap clones - * set bit 5 without DLAB set. - */ - serial_outp(up, UART_LCR, 0); - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); - status1 = serial_in(up, UART_IIR) >> 5; - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); - status2 = serial_in(up, UART_IIR) >> 5; - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_outp(up, UART_LCR, 0); - - DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2); - - if (status1 == 6 && status2 == 7) { - up->port.type = PORT_16750; - up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP; - return; - } - - /* - * Try writing and reading the UART_IER_UUE bit (b6). - * If it works, this is probably one of the Xscale platform's - * internal UARTs. - * We're going to explicitly set the UUE bit to 0 before - * trying to write and read a 1 just to make sure it's not - * already a 1 and maybe locked there before we even start start. - */ - iersave = serial_in(up, UART_IER); - serial_outp(up, UART_IER, iersave & ~UART_IER_UUE); - if (!(serial_in(up, UART_IER) & UART_IER_UUE)) { - /* - * OK it's in a known zero state, try writing and reading - * without disturbing the current state of the other bits. - */ - serial_outp(up, UART_IER, iersave | UART_IER_UUE); - if (serial_in(up, UART_IER) & UART_IER_UUE) { - /* - * It's an Xscale. - * We'll leave the UART_IER_UUE bit set to 1 (enabled). - */ - DEBUG_AUTOCONF("Xscale "); - up->port.type = PORT_XSCALE; - up->capabilities |= UART_CAP_UUE; - return; - } - } else { - /* - * If we got here we couldn't force the IER_UUE bit to 0. - * Log it and continue. - */ - DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 "); - } - serial_outp(up, UART_IER, iersave); - - /* - * We distinguish between 16550A and U6 16550A by counting - * how many bytes are in the FIFO. - */ - if (up->port.type == PORT_16550A && size_fifo(up) == 64) { - up->port.type = PORT_U6_16550A; - up->capabilities |= UART_CAP_AFE; - } -} - -/* - * This routine is called by rs_init() to initialize a specific serial - * port. It determines what type of UART chip this serial port is - * using: 8250, 16450, 16550, 16550A. The important question is - * whether or not this UART is a 16550A or not, since this will - * determine whether or not we can use its FIFO features or not. - */ -static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) -{ - unsigned char status1, scratch, scratch2, scratch3; - unsigned char save_lcr, save_mcr; - unsigned long flags; - - if (!up->port.iobase && !up->port.mapbase && !up->port.membase) - return; - - DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ", - serial_index(&up->port), up->port.iobase, up->port.membase); - - /* - * We really do need global IRQs disabled here - we're going to - * be frobbing the chips IRQ enable register to see if it exists. - */ - spin_lock_irqsave(&up->port.lock, flags); - - up->capabilities = 0; - up->bugs = 0; - - if (!(up->port.flags & UPF_BUGGY_UART)) { - /* - * Do a simple existence test first; if we fail this, - * there's no point trying anything else. - * - * 0x80 is used as a nonsense port to prevent against - * false positives due to ISA bus float. The - * assumption is that 0x80 is a non-existent port; - * which should be safe since include/asm/io.h also - * makes this assumption. - * - * Note: this is safe as long as MCR bit 4 is clear - * and the device is in "PC" mode. - */ - scratch = serial_inp(up, UART_IER); - serial_outp(up, UART_IER, 0); -#ifdef __i386__ - outb(0xff, 0x080); -#endif - /* - * Mask out IER[7:4] bits for test as some UARTs (e.g. TL - * 16C754B) allow only to modify them if an EFR bit is set. - */ - scratch2 = serial_inp(up, UART_IER) & 0x0f; - serial_outp(up, UART_IER, 0x0F); -#ifdef __i386__ - outb(0, 0x080); -#endif - scratch3 = serial_inp(up, UART_IER) & 0x0f; - serial_outp(up, UART_IER, scratch); - if (scratch2 != 0 || scratch3 != 0x0F) { - /* - * We failed; there's nothing here - */ - DEBUG_AUTOCONF("IER test failed (%02x, %02x) ", - scratch2, scratch3); - goto out; - } - } - - save_mcr = serial_in(up, UART_MCR); - save_lcr = serial_in(up, UART_LCR); - - /* - * Check to see if a UART is really there. Certain broken - * internal modems based on the Rockwell chipset fail this - * test, because they apparently don't implement the loopback - * test mode. So this test is skipped on the COM 1 through - * COM 4 ports. This *should* be safe, since no board - * manufacturer would be stupid enough to design a board - * that conflicts with COM 1-4 --- we hope! - */ - if (!(up->port.flags & UPF_SKIP_TEST)) { - serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); - status1 = serial_inp(up, UART_MSR) & 0xF0; - serial_outp(up, UART_MCR, save_mcr); - if (status1 != 0x90) { - DEBUG_AUTOCONF("LOOP test failed (%02x) ", - status1); - goto out; - } - } - - /* - * We're pretty sure there's a port here. Lets find out what - * type of port it is. The IIR top two bits allows us to find - * out if it's 8250 or 16450, 16550, 16550A or later. This - * determines what we test for next. - * - * We also initialise the EFR (if any) to zero for later. The - * EFR occupies the same register location as the FCR and IIR. - */ - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_outp(up, UART_EFR, 0); - serial_outp(up, UART_LCR, 0); - - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - scratch = serial_in(up, UART_IIR) >> 6; - - DEBUG_AUTOCONF("iir=%d ", scratch); - - switch (scratch) { - case 0: - autoconfig_8250(up); - break; - case 1: - up->port.type = PORT_UNKNOWN; - break; - case 2: - up->port.type = PORT_16550; - break; - case 3: - autoconfig_16550a(up); - break; - } - -#ifdef CONFIG_SERIAL_8250_RSA - /* - * Only probe for RSA ports if we got the region. - */ - if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) { - int i; - - for (i = 0 ; i < probe_rsa_count; ++i) { - if (probe_rsa[i] == up->port.iobase && - __enable_rsa(up)) { - up->port.type = PORT_RSA; - break; - } - } - } -#endif - - serial_outp(up, UART_LCR, save_lcr); - - if (up->capabilities != uart_config[up->port.type].flags) { - printk(KERN_WARNING - "ttyS%d: detected caps %08x should be %08x\n", - serial_index(&up->port), up->capabilities, - uart_config[up->port.type].flags); - } - - up->port.fifosize = uart_config[up->port.type].fifo_size; - up->capabilities = uart_config[up->port.type].flags; - up->tx_loadsz = uart_config[up->port.type].tx_loadsz; - - if (up->port.type == PORT_UNKNOWN) - goto out; - - /* - * Reset the UART. - */ -#ifdef CONFIG_SERIAL_8250_RSA - if (up->port.type == PORT_RSA) - serial_outp(up, UART_RSA_FRR, 0); -#endif - serial_outp(up, UART_MCR, save_mcr); - serial8250_clear_fifos(up); - serial_in(up, UART_RX); - if (up->capabilities & UART_CAP_UUE) - serial_outp(up, UART_IER, UART_IER_UUE); - else - serial_outp(up, UART_IER, 0); - - out: - spin_unlock_irqrestore(&up->port.lock, flags); - DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name); -} - -static void autoconfig_irq(struct uart_8250_port *up) -{ - unsigned char save_mcr, save_ier; - unsigned char save_ICP = 0; - unsigned int ICP = 0; - unsigned long irqs; - int irq; - - if (up->port.flags & UPF_FOURPORT) { - ICP = (up->port.iobase & 0xfe0) | 0x1f; - save_ICP = inb_p(ICP); - outb_p(0x80, ICP); - (void) inb_p(ICP); - } - - /* forget possible initially masked and pending IRQ */ - probe_irq_off(probe_irq_on()); - save_mcr = serial_inp(up, UART_MCR); - save_ier = serial_inp(up, UART_IER); - serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); - - irqs = probe_irq_on(); - serial_outp(up, UART_MCR, 0); - udelay(10); - if (up->port.flags & UPF_FOURPORT) { - serial_outp(up, UART_MCR, - UART_MCR_DTR | UART_MCR_RTS); - } else { - serial_outp(up, UART_MCR, - UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); - } - serial_outp(up, UART_IER, 0x0f); /* enable all intrs */ - (void)serial_inp(up, UART_LSR); - (void)serial_inp(up, UART_RX); - (void)serial_inp(up, UART_IIR); - (void)serial_inp(up, UART_MSR); - serial_outp(up, UART_TX, 0xFF); - udelay(20); - irq = probe_irq_off(irqs); - - serial_outp(up, UART_MCR, save_mcr); - serial_outp(up, UART_IER, save_ier); - - if (up->port.flags & UPF_FOURPORT) - outb_p(save_ICP, ICP); - - up->port.irq = (irq > 0) ? irq : 0; -} - -static inline void __stop_tx(struct uart_8250_port *p) -{ - if (p->ier & UART_IER_THRI) { - p->ier &= ~UART_IER_THRI; - serial_out(p, UART_IER, p->ier); - } -} - -static void serial8250_stop_tx(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - - __stop_tx(up); - - /* - * We really want to stop the transmitter from sending. - */ - if (up->port.type == PORT_16C950) { - up->acr |= UART_ACR_TXDIS; - serial_icr_write(up, UART_ACR, up->acr); - } -} - -static void transmit_chars(struct uart_8250_port *up); - -static void serial8250_start_tx(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - - if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - - if (up->bugs & UART_BUG_TXEN) { - unsigned char lsr; - lsr = serial_in(up, UART_LSR); - up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - if ((up->port.type == PORT_RM9000) ? - (lsr & UART_LSR_THRE) : - (lsr & UART_LSR_TEMT)) - transmit_chars(up); - } - } - - /* - * Re-enable the transmitter if we disabled it. - */ - if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { - up->acr &= ~UART_ACR_TXDIS; - serial_icr_write(up, UART_ACR, up->acr); - } -} - -static void serial8250_stop_rx(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - - up->ier &= ~UART_IER_RLSI; - up->port.read_status_mask &= ~UART_LSR_DR; - serial_out(up, UART_IER, up->ier); -} - -static void serial8250_enable_ms(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - - /* no MSR capabilities */ - if (up->bugs & UART_BUG_NOMSR) - return; - - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); -} - -static void -receive_chars(struct uart_8250_port *up, unsigned int *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned char ch, lsr = *status; - int max_count = 256; - char flag; - - do { - if (likely(lsr & UART_LSR_DR)) - ch = serial_inp(up, UART_RX); - else - /* - * Intel 82571 has a Serial Over Lan device that will - * set UART_LSR_BI without setting UART_LSR_DR when - * it receives a break. To avoid reading from the - * receive buffer without UART_LSR_DR bit set, we - * just force the read character to be 0 - */ - ch = 0; - - flag = TTY_NORMAL; - up->port.icount.rx++; - - lsr |= up->lsr_saved_flags; - up->lsr_saved_flags = 0; - - if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { - /* - * For statistics only - */ - if (lsr & UART_LSR_BI) { - lsr &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (lsr & UART_LSR_PE) - up->port.icount.parity++; - else if (lsr & UART_LSR_FE) - up->port.icount.frame++; - if (lsr & UART_LSR_OE) - up->port.icount.overrun++; - - /* - * Mask off conditions which should be ignored. - */ - lsr &= up->port.read_status_mask; - - if (lsr & UART_LSR_BI) { - DEBUG_INTR("handling break...."); - flag = TTY_BREAK; - } else if (lsr & UART_LSR_PE) - flag = TTY_PARITY; - else if (lsr & UART_LSR_FE) - flag = TTY_FRAME; - } - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - - uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); - -ignore_char: - lsr = serial_inp(up, UART_LSR); - } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); - spin_unlock(&up->port.lock); - tty_flip_buffer_push(tty); - spin_lock(&up->port.lock); - *status = lsr; -} - -static void transmit_chars(struct uart_8250_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { - serial_outp(up, UART_TX, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_tx_stopped(&up->port)) { - serial8250_stop_tx(&up->port); - return; - } - if (uart_circ_empty(xmit)) { - __stop_tx(up); - return; - } - - count = up->tx_loadsz; - do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - DEBUG_INTR("THRE..."); - - if (uart_circ_empty(xmit)) - __stop_tx(up); -} - -static unsigned int check_modem_status(struct uart_8250_port *up) -{ - unsigned int status = serial_in(up, UART_MSR); - - status |= up->msr_saved_flags; - up->msr_saved_flags = 0; - if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && - up->port.state != NULL) { - if (status & UART_MSR_TERI) - up->port.icount.rng++; - if (status & UART_MSR_DDSR) - up->port.icount.dsr++; - if (status & UART_MSR_DDCD) - uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); - if (status & UART_MSR_DCTS) - uart_handle_cts_change(&up->port, status & UART_MSR_CTS); - - wake_up_interruptible(&up->port.state->port.delta_msr_wait); - } - - return status; -} - -/* - * This handles the interrupt from one port. - */ -static void serial8250_handle_port(struct uart_8250_port *up) -{ - unsigned int status; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - status = serial_inp(up, UART_LSR); - - DEBUG_INTR("status = %x...", status); - - if (status & (UART_LSR_DR | UART_LSR_BI)) - receive_chars(up, &status); - check_modem_status(up); - if (status & UART_LSR_THRE) - transmit_chars(up); - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -/* - * This is the serial driver's interrupt routine. - * - * Arjan thinks the old way was overly complex, so it got simplified. - * Alan disagrees, saying that need the complexity to handle the weird - * nature of ISA shared interrupts. (This is a special exception.) - * - * In order to handle ISA shared interrupts properly, we need to check - * that all ports have been serviced, and therefore the ISA interrupt - * line has been de-asserted. - * - * This means we need to loop through all ports. checking that they - * don't have an interrupt pending. - */ -static irqreturn_t serial8250_interrupt(int irq, void *dev_id) -{ - struct irq_info *i = dev_id; - struct list_head *l, *end = NULL; - int pass_counter = 0, handled = 0; - - DEBUG_INTR("serial8250_interrupt(%d)...", irq); - - spin_lock(&i->lock); - - l = i->head; - do { - struct uart_8250_port *up; - unsigned int iir; - - up = list_entry(l, struct uart_8250_port, list); - - iir = serial_in(up, UART_IIR); - if (!(iir & UART_IIR_NO_INT)) { - serial8250_handle_port(up); - - handled = 1; - - end = NULL; - } else if ((up->port.iotype == UPIO_DWAPB || - up->port.iotype == UPIO_DWAPB32) && - (iir & UART_IIR_BUSY) == UART_IIR_BUSY) { - /* The DesignWare APB UART has an Busy Detect (0x07) - * interrupt meaning an LCR write attempt occured while the - * UART was busy. The interrupt must be cleared by reading - * the UART status register (USR) and the LCR re-written. */ - unsigned int status; - status = *(volatile u32 *)up->port.private_data; - serial_out(up, UART_LCR, up->lcr); - - handled = 1; - - end = NULL; - } else if (end == NULL) - end = l; - - l = l->next; - - if (l == i->head && pass_counter++ > PASS_LIMIT) { - /* If we hit this, we're dead. */ - printk_ratelimited(KERN_ERR - "serial8250: too much work for irq%d\n", irq); - break; - } - } while (l != end); - - spin_unlock(&i->lock); - - DEBUG_INTR("end.\n"); - - return IRQ_RETVAL(handled); -} - -/* - * To support ISA shared interrupts, we need to have one interrupt - * handler that ensures that the IRQ line has been deasserted - * before returning. Failing to do this will result in the IRQ - * line being stuck active, and, since ISA irqs are edge triggered, - * no more IRQs will be seen. - */ -static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) -{ - spin_lock_irq(&i->lock); - - if (!list_empty(i->head)) { - if (i->head == &up->list) - i->head = i->head->next; - list_del(&up->list); - } else { - BUG_ON(i->head != &up->list); - i->head = NULL; - } - spin_unlock_irq(&i->lock); - /* List empty so throw away the hash node */ - if (i->head == NULL) { - hlist_del(&i->node); - kfree(i); - } -} - -static int serial_link_irq_chain(struct uart_8250_port *up) -{ - struct hlist_head *h; - struct hlist_node *n; - struct irq_info *i; - int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; - - mutex_lock(&hash_mutex); - - h = &irq_lists[up->port.irq % NR_IRQ_HASH]; - - hlist_for_each(n, h) { - i = hlist_entry(n, struct irq_info, node); - if (i->irq == up->port.irq) - break; - } - - if (n == NULL) { - i = kzalloc(sizeof(struct irq_info), GFP_KERNEL); - if (i == NULL) { - mutex_unlock(&hash_mutex); - return -ENOMEM; - } - spin_lock_init(&i->lock); - i->irq = up->port.irq; - hlist_add_head(&i->node, h); - } - mutex_unlock(&hash_mutex); - - spin_lock_irq(&i->lock); - - if (i->head) { - list_add(&up->list, i->head); - spin_unlock_irq(&i->lock); - - ret = 0; - } else { - INIT_LIST_HEAD(&up->list); - i->head = &up->list; - spin_unlock_irq(&i->lock); - irq_flags |= up->port.irqflags; - ret = request_irq(up->port.irq, serial8250_interrupt, - irq_flags, "serial", i); - if (ret < 0) - serial_do_unlink(i, up); - } - - return ret; -} - -static void serial_unlink_irq_chain(struct uart_8250_port *up) -{ - struct irq_info *i; - struct hlist_node *n; - struct hlist_head *h; - - mutex_lock(&hash_mutex); - - h = &irq_lists[up->port.irq % NR_IRQ_HASH]; - - hlist_for_each(n, h) { - i = hlist_entry(n, struct irq_info, node); - if (i->irq == up->port.irq) - break; - } - - BUG_ON(n == NULL); - BUG_ON(i->head == NULL); - - if (list_empty(i->head)) - free_irq(up->port.irq, i); - - serial_do_unlink(i, up); - mutex_unlock(&hash_mutex); -} - -/* - * This function is used to handle ports that do not have an - * interrupt. This doesn't work very well for 16450's, but gives - * barely passable results for a 16550A. (Although at the expense - * of much CPU overhead). - */ -static void serial8250_timeout(unsigned long data) -{ - struct uart_8250_port *up = (struct uart_8250_port *)data; - unsigned int iir; - - iir = serial_in(up, UART_IIR); - if (!(iir & UART_IIR_NO_INT)) - serial8250_handle_port(up); - mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port)); -} - -static void serial8250_backup_timeout(unsigned long data) -{ - struct uart_8250_port *up = (struct uart_8250_port *)data; - unsigned int iir, ier = 0, lsr; - unsigned long flags; - - /* - * Must disable interrupts or else we risk racing with the interrupt - * based handler. - */ - if (is_real_interrupt(up->port.irq)) { - ier = serial_in(up, UART_IER); - serial_out(up, UART_IER, 0); - } - - iir = serial_in(up, UART_IIR); - - /* - * This should be a safe test for anyone who doesn't trust the - * IIR bits on their UART, but it's specifically designed for - * the "Diva" UART used on the management processor on many HP - * ia64 and parisc boxes. - */ - spin_lock_irqsave(&up->port.lock, flags); - lsr = serial_in(up, UART_LSR); - up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - spin_unlock_irqrestore(&up->port.lock, flags); - if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && - (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) && - (lsr & UART_LSR_THRE)) { - iir &= ~(UART_IIR_ID | UART_IIR_NO_INT); - iir |= UART_IIR_THRI; - } - - if (!(iir & UART_IIR_NO_INT)) - serial8250_handle_port(up); - - if (is_real_interrupt(up->port.irq)) - serial_out(up, UART_IER, ier); - - /* Standard timer interval plus 0.2s to keep the port running */ - mod_timer(&up->timer, - jiffies + uart_poll_timeout(&up->port) + HZ / 5); -} - -static unsigned int serial8250_tx_empty(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned long flags; - unsigned int lsr; - - spin_lock_irqsave(&up->port.lock, flags); - lsr = serial_in(up, UART_LSR); - up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; - spin_unlock_irqrestore(&up->port.lock, flags); - - return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0; -} - -static unsigned int serial8250_get_mctrl(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned int status; - unsigned int ret; - - status = check_modem_status(up); - - ret = 0; - if (status & UART_MSR_DCD) - ret |= TIOCM_CAR; - if (status & UART_MSR_RI) - ret |= TIOCM_RNG; - if (status & UART_MSR_DSR) - ret |= TIOCM_DSR; - if (status & UART_MSR_CTS) - ret |= TIOCM_CTS; - return ret; -} - -static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned char mcr = 0; - - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr; - - serial_out(up, UART_MCR, mcr); -} - -static void serial8250_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - if (break_state == -1) - up->lcr |= UART_LCR_SBC; - else - up->lcr &= ~UART_LCR_SBC; - serial_out(up, UART_LCR, up->lcr); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -/* - * Wait for transmitter & holding register to empty - */ -static void wait_for_xmitr(struct uart_8250_port *up, int bits) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - for (;;) { - status = serial_in(up, UART_LSR); - - up->lsr_saved_flags |= status & LSR_SAVE_FLAGS; - - if ((status & bits) == bits) - break; - if (--tmout == 0) - break; - udelay(1); - } - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - unsigned int tmout; - for (tmout = 1000000; tmout; tmout--) { - unsigned int msr = serial_in(up, UART_MSR); - up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; - if (msr & UART_MSR_CTS) - break; - udelay(1); - touch_nmi_watchdog(); - } - } -} - -#ifdef CONFIG_CONSOLE_POLL -/* - * Console polling routines for writing and reading from the uart while - * in an interrupt or debug context. - */ - -static int serial8250_get_poll_char(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned char lsr = serial_inp(up, UART_LSR); - - if (!(lsr & UART_LSR_DR)) - return NO_POLL_CHAR; - - return serial_inp(up, UART_RX); -} - - -static void serial8250_put_poll_char(struct uart_port *port, - unsigned char c) -{ - unsigned int ier; - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - - /* - * First save the IER then disable the interrupts - */ - ier = serial_in(up, UART_IER); - if (up->capabilities & UART_CAP_UUE) - serial_out(up, UART_IER, UART_IER_UUE); - else - serial_out(up, UART_IER, 0); - - wait_for_xmitr(up, BOTH_EMPTY); - /* - * Send the character out. - * If a LF, also do CR... - */ - serial_out(up, UART_TX, c); - if (c == 10) { - wait_for_xmitr(up, BOTH_EMPTY); - serial_out(up, UART_TX, 13); - } - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up, BOTH_EMPTY); - serial_out(up, UART_IER, ier); -} - -#endif /* CONFIG_CONSOLE_POLL */ - -static int serial8250_startup(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned long flags; - unsigned char lsr, iir; - int retval; - - up->port.fifosize = uart_config[up->port.type].fifo_size; - up->tx_loadsz = uart_config[up->port.type].tx_loadsz; - up->capabilities = uart_config[up->port.type].flags; - up->mcr = 0; - - if (up->port.iotype != up->cur_iotype) - set_io_from_upio(port); - - if (up->port.type == PORT_16C950) { - /* Wake up and initialize UART */ - up->acr = 0; - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_outp(up, UART_EFR, UART_EFR_ECB); - serial_outp(up, UART_IER, 0); - serial_outp(up, UART_LCR, 0); - serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ - serial_outp(up, UART_LCR, 0xBF); - serial_outp(up, UART_EFR, UART_EFR_ECB); - serial_outp(up, UART_LCR, 0); - } - -#ifdef CONFIG_SERIAL_8250_RSA - /* - * If this is an RSA port, see if we can kick it up to the - * higher speed clock. - */ - enable_rsa(up); -#endif - - /* - * Clear the FIFO buffers and disable them. - * (they will be reenabled in set_termios()) - */ - serial8250_clear_fifos(up); - - /* - * Clear the interrupt registers. - */ - (void) serial_inp(up, UART_LSR); - (void) serial_inp(up, UART_RX); - (void) serial_inp(up, UART_IIR); - (void) serial_inp(up, UART_MSR); - - /* - * At this point, there's no way the LSR could still be 0xff; - * if it is, then bail out, because there's likely no UART - * here. - */ - if (!(up->port.flags & UPF_BUGGY_UART) && - (serial_inp(up, UART_LSR) == 0xff)) { - printk(KERN_INFO "ttyS%d: LSR safety check engaged!\n", - serial_index(&up->port)); - return -ENODEV; - } - - /* - * For a XR16C850, we need to set the trigger levels - */ - if (up->port.type == PORT_16850) { - unsigned char fctr; - - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); - - fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX); - serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX); - serial_outp(up, UART_TRG, UART_TRG_96); - serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX); - serial_outp(up, UART_TRG, UART_TRG_96); - - serial_outp(up, UART_LCR, 0); - } - - if (is_real_interrupt(up->port.irq)) { - unsigned char iir1; - /* - * Test for UARTs that do not reassert THRE when the - * transmitter is idle and the interrupt has already - * been cleared. Real 16550s should always reassert - * this interrupt whenever the transmitter is idle and - * the interrupt is enabled. Delays are necessary to - * allow register changes to become visible. - */ - spin_lock_irqsave(&up->port.lock, flags); - if (up->port.irqflags & IRQF_SHARED) - disable_irq_nosync(up->port.irq); - - wait_for_xmitr(up, UART_LSR_THRE); - serial_out_sync(up, UART_IER, UART_IER_THRI); - udelay(1); /* allow THRE to set */ - iir1 = serial_in(up, UART_IIR); - serial_out(up, UART_IER, 0); - serial_out_sync(up, UART_IER, UART_IER_THRI); - udelay(1); /* allow a working UART time to re-assert THRE */ - iir = serial_in(up, UART_IIR); - serial_out(up, UART_IER, 0); - - if (up->port.irqflags & IRQF_SHARED) - enable_irq(up->port.irq); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * If the interrupt is not reasserted, setup a timer to - * kick the UART on a regular basis. - */ - if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) { - up->bugs |= UART_BUG_THRE; - pr_debug("ttyS%d - using backup timer\n", - serial_index(port)); - } - } - - /* - * The above check will only give an accurate result the first time - * the port is opened so this value needs to be preserved. - */ - if (up->bugs & UART_BUG_THRE) { - up->timer.function = serial8250_backup_timeout; - up->timer.data = (unsigned long)up; - mod_timer(&up->timer, jiffies + - uart_poll_timeout(port) + HZ / 5); - } - - /* - * If the "interrupt" for this port doesn't correspond with any - * hardware interrupt, we use a timer-based system. The original - * driver used to do this with IRQ0. - */ - if (!is_real_interrupt(up->port.irq)) { - up->timer.data = (unsigned long)up; - mod_timer(&up->timer, jiffies + uart_poll_timeout(port)); - } else { - retval = serial_link_irq_chain(up); - if (retval) - return retval; - } - - /* - * Now, initialize the UART - */ - serial_outp(up, UART_LCR, UART_LCR_WLEN8); - - spin_lock_irqsave(&up->port.lock, flags); - if (up->port.flags & UPF_FOURPORT) { - if (!is_real_interrupt(up->port.irq)) - up->port.mctrl |= TIOCM_OUT1; - } else - /* - * Most PC uarts need OUT2 raised to enable interrupts. - */ - if (is_real_interrupt(up->port.irq)) - up->port.mctrl |= TIOCM_OUT2; - - serial8250_set_mctrl(&up->port, up->port.mctrl); - - /* Serial over Lan (SoL) hack: - Intel 8257x Gigabit ethernet chips have a - 16550 emulation, to be used for Serial Over Lan. - Those chips take a longer time than a normal - serial device to signalize that a transmission - data was queued. Due to that, the above test generally - fails. One solution would be to delay the reading of - iir. However, this is not reliable, since the timeout - is variable. So, let's just don't test if we receive - TX irq. This way, we'll never enable UART_BUG_TXEN. - */ - if (skip_txen_test || up->port.flags & UPF_NO_TXEN_TEST) - goto dont_test_tx_en; - - /* - * Do a quick test to see if we receive an - * interrupt when we enable the TX irq. - */ - serial_outp(up, UART_IER, UART_IER_THRI); - lsr = serial_in(up, UART_LSR); - iir = serial_in(up, UART_IIR); - serial_outp(up, UART_IER, 0); - - if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) { - if (!(up->bugs & UART_BUG_TXEN)) { - up->bugs |= UART_BUG_TXEN; - pr_debug("ttyS%d - enabling bad tx status workarounds\n", - serial_index(port)); - } - } else { - up->bugs &= ~UART_BUG_TXEN; - } - -dont_test_tx_en: - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Clear the interrupt registers again for luck, and clear the - * saved flags to avoid getting false values from polling - * routines or the previous session. - */ - serial_inp(up, UART_LSR); - serial_inp(up, UART_RX); - serial_inp(up, UART_IIR); - serial_inp(up, UART_MSR); - up->lsr_saved_flags = 0; - up->msr_saved_flags = 0; - - /* - * Finally, enable interrupts. Note: Modem status interrupts - * are set via set_termios(), which will be occurring imminently - * anyway, so we don't enable them here. - */ - up->ier = UART_IER_RLSI | UART_IER_RDI; - serial_outp(up, UART_IER, up->ier); - - if (up->port.flags & UPF_FOURPORT) { - unsigned int icp; - /* - * Enable interrupts on the AST Fourport board - */ - icp = (up->port.iobase & 0xfe0) | 0x01f; - outb_p(0x80, icp); - (void) inb_p(icp); - } - - return 0; -} - -static void serial8250_shutdown(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned long flags; - - /* - * Disable interrupts from this port - */ - up->ier = 0; - serial_outp(up, UART_IER, 0); - - spin_lock_irqsave(&up->port.lock, flags); - if (up->port.flags & UPF_FOURPORT) { - /* reset interrupts on the AST Fourport board */ - inb((up->port.iobase & 0xfe0) | 0x1f); - up->port.mctrl |= TIOCM_OUT1; - } else - up->port.mctrl &= ~TIOCM_OUT2; - - serial8250_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Disable break condition and FIFOs - */ - serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); - serial8250_clear_fifos(up); - -#ifdef CONFIG_SERIAL_8250_RSA - /* - * Reset the RSA board back to 115kbps compat mode. - */ - disable_rsa(up); -#endif - - /* - * Read data port to reset things, and then unlink from - * the IRQ chain. - */ - (void) serial_in(up, UART_RX); - - del_timer_sync(&up->timer); - up->timer.function = serial8250_timeout; - if (is_real_interrupt(up->port.irq)) - serial_unlink_irq_chain(up); -} - -static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) -{ - unsigned int quot; - - /* - * Handle magic divisors for baud rates above baud_base on - * SMSC SuperIO chips. - */ - if ((port->flags & UPF_MAGIC_MULTIPLIER) && - baud == (port->uartclk/4)) - quot = 0x8001; - else if ((port->flags & UPF_MAGIC_MULTIPLIER) && - baud == (port->uartclk/8)) - quot = 0x8002; - else - quot = uart_get_divisor(port, baud); - - return quot; -} - -void -serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - unsigned char cval, fcr = 0; - unsigned long flags; - unsigned int baud, quot; - - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } - - if (termios->c_cflag & CSTOPB) - cval |= UART_LCR_STOP; - if (termios->c_cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(termios->c_cflag & PARODD)) - cval |= UART_LCR_EPAR; -#ifdef CMSPAR - if (termios->c_cflag & CMSPAR) - cval |= UART_LCR_SPAR; -#endif - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, - port->uartclk / 16 / 0xffff, - port->uartclk / 16); - quot = serial8250_get_divisor(port, baud); - - /* - * Oxford Semi 952 rev B workaround - */ - if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0) - quot++; - - if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) { - if (baud < 2400) - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; - else - fcr = uart_config[up->port.type].fcr; - } - - /* - * MCR-based auto flow control. When AFE is enabled, RTS will be - * deasserted when the receive FIFO contains more characters than - * the trigger, or the MCR RTS bit is cleared. In the case where - * the remote UART is not using CTS auto flow control, we must - * have sufficient FIFO entries for the latency of the remote - * UART to respond. IOW, at least 32 bytes of FIFO. - */ - if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) { - up->mcr &= ~UART_MCR_AFE; - if (termios->c_cflag & CRTSCTS) - up->mcr |= UART_MCR_AFE; - } - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (termios->c_iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (termios->c_iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; - - /* - * Characteres to ignore - */ - up->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; - - /* - * CTS flow control flag and modem status interrupts - */ - up->ier &= ~UART_IER_MSI; - if (!(up->bugs & UART_BUG_NOMSR) && - UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->ier |= UART_IER_MSI; - if (up->capabilities & UART_CAP_UUE) - up->ier |= UART_IER_UUE | UART_IER_RTOIE; - - serial_out(up, UART_IER, up->ier); - - if (up->capabilities & UART_CAP_EFR) { - unsigned char efr = 0; - /* - * TI16C752/Startech hardware flow control. FIXME: - * - TI16C752 requires control thresholds to be set. - * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled. - */ - if (termios->c_cflag & CRTSCTS) - efr |= UART_EFR_CTS; - - serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_outp(up, UART_EFR, efr); - } - -#ifdef CONFIG_ARCH_OMAP - /* Workaround to enable 115200 baud on OMAP1510 internal ports */ - if (cpu_is_omap1510() && is_omap_port(up)) { - if (baud == 115200) { - quot = 1; - serial_out(up, UART_OMAP_OSC_12M_SEL, 1); - } else - serial_out(up, UART_OMAP_OSC_12M_SEL, 0); - } -#endif - - if (up->capabilities & UART_NATSEMI) { - /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */ - serial_outp(up, UART_LCR, 0xe0); - } else { - serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ - } - - serial_dl_write(up, quot); - - /* - * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR - * is written without DLAB set, this mode will be disabled. - */ - if (up->port.type == PORT_16750) - serial_outp(up, UART_FCR, fcr); - - serial_outp(up, UART_LCR, cval); /* reset DLAB */ - up->lcr = cval; /* Save LCR */ - if (up->port.type != PORT_16750) { - if (fcr & UART_FCR_ENABLE_FIFO) { - /* emulated UARTs (Lucent Venus 167x) need two steps */ - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - } - serial_outp(up, UART_FCR, fcr); /* set fcr */ - } - serial8250_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - /* Don't rewrite B0 */ - if (tty_termios_baud_rate(termios)) - tty_termios_encode_baud_rate(termios, baud, baud); -} -EXPORT_SYMBOL(serial8250_do_set_termios); - -static void -serial8250_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - if (port->set_termios) - port->set_termios(port, termios, old); - else - serial8250_do_set_termios(port, termios, old); -} - -static void -serial8250_set_ldisc(struct uart_port *port, int new) -{ - if (new == N_PPS) { - port->flags |= UPF_HARDPPS_CD; - serial8250_enable_ms(port); - } else - port->flags &= ~UPF_HARDPPS_CD; -} - - -void serial8250_do_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - struct uart_8250_port *p = - container_of(port, struct uart_8250_port, port); - - serial8250_set_sleep(p, state != 0); -} -EXPORT_SYMBOL(serial8250_do_pm); - -static void -serial8250_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - if (port->pm) - port->pm(port, state, oldstate); - else - serial8250_do_pm(port, state, oldstate); -} - -static unsigned int serial8250_port_size(struct uart_8250_port *pt) -{ - if (pt->port.iotype == UPIO_AU) - return 0x1000; -#ifdef CONFIG_ARCH_OMAP - if (is_omap_port(pt)) - return 0x16 << pt->port.regshift; -#endif - return 8 << pt->port.regshift; -} - -/* - * Resource handling. - */ -static int serial8250_request_std_resource(struct uart_8250_port *up) -{ - unsigned int size = serial8250_port_size(up); - int ret = 0; - - switch (up->port.iotype) { - case UPIO_AU: - case UPIO_TSI: - case UPIO_MEM32: - case UPIO_MEM: - case UPIO_DWAPB: - case UPIO_DWAPB32: - if (!up->port.mapbase) - break; - - if (!request_mem_region(up->port.mapbase, size, "serial")) { - ret = -EBUSY; - break; - } - - if (up->port.flags & UPF_IOREMAP) { - up->port.membase = ioremap_nocache(up->port.mapbase, - size); - if (!up->port.membase) { - release_mem_region(up->port.mapbase, size); - ret = -ENOMEM; - } - } - break; - - case UPIO_HUB6: - case UPIO_PORT: - if (!request_region(up->port.iobase, size, "serial")) - ret = -EBUSY; - break; - } - return ret; -} - -static void serial8250_release_std_resource(struct uart_8250_port *up) -{ - unsigned int size = serial8250_port_size(up); - - switch (up->port.iotype) { - case UPIO_AU: - case UPIO_TSI: - case UPIO_MEM32: - case UPIO_MEM: - case UPIO_DWAPB: - case UPIO_DWAPB32: - if (!up->port.mapbase) - break; - - if (up->port.flags & UPF_IOREMAP) { - iounmap(up->port.membase); - up->port.membase = NULL; - } - - release_mem_region(up->port.mapbase, size); - break; - - case UPIO_HUB6: - case UPIO_PORT: - release_region(up->port.iobase, size); - break; - } -} - -static int serial8250_request_rsa_resource(struct uart_8250_port *up) -{ - unsigned long start = UART_RSA_BASE << up->port.regshift; - unsigned int size = 8 << up->port.regshift; - int ret = -EINVAL; - - switch (up->port.iotype) { - case UPIO_HUB6: - case UPIO_PORT: - start += up->port.iobase; - if (request_region(start, size, "serial-rsa")) - ret = 0; - else - ret = -EBUSY; - break; - } - - return ret; -} - -static void serial8250_release_rsa_resource(struct uart_8250_port *up) -{ - unsigned long offset = UART_RSA_BASE << up->port.regshift; - unsigned int size = 8 << up->port.regshift; - - switch (up->port.iotype) { - case UPIO_HUB6: - case UPIO_PORT: - release_region(up->port.iobase + offset, size); - break; - } -} - -static void serial8250_release_port(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - - serial8250_release_std_resource(up); - if (up->port.type == PORT_RSA) - serial8250_release_rsa_resource(up); -} - -static int serial8250_request_port(struct uart_port *port) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - int ret = 0; - - ret = serial8250_request_std_resource(up); - if (ret == 0 && up->port.type == PORT_RSA) { - ret = serial8250_request_rsa_resource(up); - if (ret < 0) - serial8250_release_std_resource(up); - } - - return ret; -} - -static void serial8250_config_port(struct uart_port *port, int flags) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - int probeflags = PROBE_ANY; - int ret; - - /* - * Find the region that we can probe for. This in turn - * tells us whether we can probe for the type of port. - */ - ret = serial8250_request_std_resource(up); - if (ret < 0) - return; - - ret = serial8250_request_rsa_resource(up); - if (ret < 0) - probeflags &= ~PROBE_RSA; - - if (up->port.iotype != up->cur_iotype) - set_io_from_upio(port); - - if (flags & UART_CONFIG_TYPE) - autoconfig(up, probeflags); - - /* if access method is AU, it is a 16550 with a quirk */ - if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) - up->bugs |= UART_BUG_NOMSR; - - if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) - autoconfig_irq(up); - - if (up->port.type != PORT_RSA && probeflags & PROBE_RSA) - serial8250_release_rsa_resource(up); - if (up->port.type == PORT_UNKNOWN) - serial8250_release_std_resource(up); -} - -static int -serial8250_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - if (ser->irq >= nr_irqs || ser->irq < 0 || - ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || - ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS || - ser->type == PORT_STARTECH) - return -EINVAL; - return 0; -} - -static const char * -serial8250_type(struct uart_port *port) -{ - int type = port->type; - - if (type >= ARRAY_SIZE(uart_config)) - type = 0; - return uart_config[type].name; -} - -static struct uart_ops serial8250_pops = { - .tx_empty = serial8250_tx_empty, - .set_mctrl = serial8250_set_mctrl, - .get_mctrl = serial8250_get_mctrl, - .stop_tx = serial8250_stop_tx, - .start_tx = serial8250_start_tx, - .stop_rx = serial8250_stop_rx, - .enable_ms = serial8250_enable_ms, - .break_ctl = serial8250_break_ctl, - .startup = serial8250_startup, - .shutdown = serial8250_shutdown, - .set_termios = serial8250_set_termios, - .set_ldisc = serial8250_set_ldisc, - .pm = serial8250_pm, - .type = serial8250_type, - .release_port = serial8250_release_port, - .request_port = serial8250_request_port, - .config_port = serial8250_config_port, - .verify_port = serial8250_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = serial8250_get_poll_char, - .poll_put_char = serial8250_put_poll_char, -#endif -}; - -static struct uart_8250_port serial8250_ports[UART_NR]; - -static void (*serial8250_isa_config)(int port, struct uart_port *up, - unsigned short *capabilities); - -void serial8250_set_isa_configurator( - void (*v)(int port, struct uart_port *up, unsigned short *capabilities)) -{ - serial8250_isa_config = v; -} -EXPORT_SYMBOL(serial8250_set_isa_configurator); - -static void __init serial8250_isa_init_ports(void) -{ - struct uart_8250_port *up; - static int first = 1; - int i, irqflag = 0; - - if (!first) - return; - first = 0; - - for (i = 0; i < nr_uarts; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; - - up->port.line = i; - spin_lock_init(&up->port.lock); - - init_timer(&up->timer); - up->timer.function = serial8250_timeout; - - /* - * ALPHA_KLUDGE_MCR needs to be killed. - */ - up->mcr_mask = ~ALPHA_KLUDGE_MCR; - up->mcr_force = ALPHA_KLUDGE_MCR; - - up->port.ops = &serial8250_pops; - } - - if (share_irqs) - irqflag = IRQF_SHARED; - - for (i = 0, up = serial8250_ports; - i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; - i++, up++) { - up->port.iobase = old_serial_port[i].port; - up->port.irq = irq_canonicalize(old_serial_port[i].irq); - up->port.irqflags = old_serial_port[i].irqflags; - up->port.uartclk = old_serial_port[i].baud_base * 16; - up->port.flags = old_serial_port[i].flags; - up->port.hub6 = old_serial_port[i].hub6; - up->port.membase = old_serial_port[i].iomem_base; - up->port.iotype = old_serial_port[i].io_type; - up->port.regshift = old_serial_port[i].iomem_reg_shift; - set_io_from_upio(&up->port); - up->port.irqflags |= irqflag; - if (serial8250_isa_config != NULL) - serial8250_isa_config(i, &up->port, &up->capabilities); - - } -} - -static void -serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type) -{ - up->port.type = type; - up->port.fifosize = uart_config[type].fifo_size; - up->capabilities = uart_config[type].flags; - up->tx_loadsz = uart_config[type].tx_loadsz; -} - -static void __init -serial8250_register_ports(struct uart_driver *drv, struct device *dev) -{ - int i; - - for (i = 0; i < nr_uarts; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; - up->cur_iotype = 0xFF; - } - - serial8250_isa_init_ports(); - - for (i = 0; i < nr_uarts; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; - - up->port.dev = dev; - - if (up->port.flags & UPF_FIXED_TYPE) - serial8250_init_fixed_type_port(up, up->port.type); - - uart_add_one_port(drv, &up->port); - } -} - -#ifdef CONFIG_SERIAL_8250_CONSOLE - -static void serial8250_console_putchar(struct uart_port *port, int ch) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - - wait_for_xmitr(up, UART_LSR_THRE); - serial_out(up, UART_TX, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void -serial8250_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_8250_port *up = &serial8250_ports[co->index]; - unsigned long flags; - unsigned int ier; - int locked = 1; - - touch_nmi_watchdog(); - - local_irq_save(flags); - if (up->port.sysrq) { - /* serial8250_handle_port() already took the lock */ - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&up->port.lock); - } else - spin_lock(&up->port.lock); - - /* - * First save the IER then disable the interrupts - */ - ier = serial_in(up, UART_IER); - - if (up->capabilities & UART_CAP_UUE) - serial_out(up, UART_IER, UART_IER_UUE); - else - serial_out(up, UART_IER, 0); - - uart_console_write(&up->port, s, count, serial8250_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up, BOTH_EMPTY); - serial_out(up, UART_IER, ier); - - /* - * The receive handling will happen properly because the - * receive ready bit will still be set; it is not cleared - * on read. However, modem control will not, we must - * call it if we have saved something in the saved flags - * while processing with interrupts off. - */ - if (up->msr_saved_flags) - check_modem_status(up); - - if (locked) - spin_unlock(&up->port.lock); - local_irq_restore(flags); -} - -static int __init serial8250_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= nr_uarts) - co->index = 0; - port = &serial8250_ports[co->index].port; - if (!port->iobase && !port->membase) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static int serial8250_console_early_setup(void) -{ - return serial8250_find_port_for_earlycon(); -} - -static struct console serial8250_console = { - .name = "ttyS", - .write = serial8250_console_write, - .device = uart_console_device, - .setup = serial8250_console_setup, - .early_setup = serial8250_console_early_setup, - .flags = CON_PRINTBUFFER | CON_ANYTIME, - .index = -1, - .data = &serial8250_reg, -}; - -static int __init serial8250_console_init(void) -{ - if (nr_uarts > UART_NR) - nr_uarts = UART_NR; - - serial8250_isa_init_ports(); - register_console(&serial8250_console); - return 0; -} -console_initcall(serial8250_console_init); - -int serial8250_find_port(struct uart_port *p) -{ - int line; - struct uart_port *port; - - for (line = 0; line < nr_uarts; line++) { - port = &serial8250_ports[line].port; - if (uart_match_port(p, port)) - return line; - } - return -ENODEV; -} - -#define SERIAL8250_CONSOLE &serial8250_console -#else -#define SERIAL8250_CONSOLE NULL -#endif - -static struct uart_driver serial8250_reg = { - .owner = THIS_MODULE, - .driver_name = "serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .cons = SERIAL8250_CONSOLE, -}; - -/* - * early_serial_setup - early registration for 8250 ports - * - * Setup an 8250 port structure prior to console initialisation. Use - * after console initialisation will cause undefined behaviour. - */ -int __init early_serial_setup(struct uart_port *port) -{ - struct uart_port *p; - - if (port->line >= ARRAY_SIZE(serial8250_ports)) - return -ENODEV; - - serial8250_isa_init_ports(); - p = &serial8250_ports[port->line].port; - p->iobase = port->iobase; - p->membase = port->membase; - p->irq = port->irq; - p->irqflags = port->irqflags; - p->uartclk = port->uartclk; - p->fifosize = port->fifosize; - p->regshift = port->regshift; - p->iotype = port->iotype; - p->flags = port->flags; - p->mapbase = port->mapbase; - p->private_data = port->private_data; - p->type = port->type; - p->line = port->line; - - set_io_from_upio(p); - if (port->serial_in) - p->serial_in = port->serial_in; - if (port->serial_out) - p->serial_out = port->serial_out; - - return 0; -} - -/** - * serial8250_suspend_port - suspend one serial port - * @line: serial line number - * - * Suspend one serial port. - */ -void serial8250_suspend_port(int line) -{ - uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port); -} - -/** - * serial8250_resume_port - resume one serial port - * @line: serial line number - * - * Resume one serial port. - */ -void serial8250_resume_port(int line) -{ - struct uart_8250_port *up = &serial8250_ports[line]; - - if (up->capabilities & UART_NATSEMI) { - unsigned char tmp; - - /* Ensure it's still in high speed mode */ - serial_outp(up, UART_LCR, 0xE0); - - tmp = serial_in(up, 0x04); /* EXCR2 */ - tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ - tmp |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ - serial_outp(up, 0x04, tmp); - - serial_outp(up, UART_LCR, 0); - } - uart_resume_port(&serial8250_reg, &up->port); -} - -/* - * Register a set of serial devices attached to a platform device. The - * list is terminated with a zero flags entry, which means we expect - * all entries to have at least UPF_BOOT_AUTOCONF set. - */ -static int __devinit serial8250_probe(struct platform_device *dev) -{ - struct plat_serial8250_port *p = dev->dev.platform_data; - struct uart_port port; - int ret, i, irqflag = 0; - - memset(&port, 0, sizeof(struct uart_port)); - - if (share_irqs) - irqflag = IRQF_SHARED; - - for (i = 0; p && p->flags != 0; p++, i++) { - port.iobase = p->iobase; - port.membase = p->membase; - port.irq = p->irq; - port.irqflags = p->irqflags; - port.uartclk = p->uartclk; - port.regshift = p->regshift; - port.iotype = p->iotype; - port.flags = p->flags; - port.mapbase = p->mapbase; - port.hub6 = p->hub6; - port.private_data = p->private_data; - port.type = p->type; - port.serial_in = p->serial_in; - port.serial_out = p->serial_out; - port.set_termios = p->set_termios; - port.pm = p->pm; - port.dev = &dev->dev; - port.irqflags |= irqflag; - ret = serial8250_register_port(&port); - if (ret < 0) { - dev_err(&dev->dev, "unable to register port at index %d " - "(IO%lx MEM%llx IRQ%d): %d\n", i, - p->iobase, (unsigned long long)p->mapbase, - p->irq, ret); - } - } - return 0; -} - -/* - * Remove serial ports registered against a platform device. - */ -static int __devexit serial8250_remove(struct platform_device *dev) -{ - int i; - - for (i = 0; i < nr_uarts; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; - - if (up->port.dev == &dev->dev) - serial8250_unregister_port(i); - } - return 0; -} - -static int serial8250_suspend(struct platform_device *dev, pm_message_t state) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; - - if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) - uart_suspend_port(&serial8250_reg, &up->port); - } - - return 0; -} - -static int serial8250_resume(struct platform_device *dev) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_8250_port *up = &serial8250_ports[i]; - - if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) - serial8250_resume_port(i); - } - - return 0; -} - -static struct platform_driver serial8250_isa_driver = { - .probe = serial8250_probe, - .remove = __devexit_p(serial8250_remove), - .suspend = serial8250_suspend, - .resume = serial8250_resume, - .driver = { - .name = "serial8250", - .owner = THIS_MODULE, - }, -}; - -/* - * This "device" covers _all_ ISA 8250-compatible serial devices listed - * in the table in include/asm/serial.h - */ -static struct platform_device *serial8250_isa_devs; - -/* - * serial8250_register_port and serial8250_unregister_port allows for - * 16x50 serial ports to be configured at run-time, to support PCMCIA - * modems and PCI multiport cards. - */ -static DEFINE_MUTEX(serial_mutex); - -static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port) -{ - int i; - - /* - * First, find a port entry which matches. - */ - for (i = 0; i < nr_uarts; i++) - if (uart_match_port(&serial8250_ports[i].port, port)) - return &serial8250_ports[i]; - - /* - * We didn't find a matching entry, so look for the first - * free entry. We look for one which hasn't been previously - * used (indicated by zero iobase). - */ - for (i = 0; i < nr_uarts; i++) - if (serial8250_ports[i].port.type == PORT_UNKNOWN && - serial8250_ports[i].port.iobase == 0) - return &serial8250_ports[i]; - - /* - * That also failed. Last resort is to find any entry which - * doesn't have a real port associated with it. - */ - for (i = 0; i < nr_uarts; i++) - if (serial8250_ports[i].port.type == PORT_UNKNOWN) - return &serial8250_ports[i]; - - return NULL; -} - -/** - * serial8250_register_port - register a serial port - * @port: serial port template - * - * Configure the serial port specified by the request. If the - * port exists and is in use, it is hung up and unregistered - * first. - * - * The port is then probed and if necessary the IRQ is autodetected - * If this fails an error is returned. - * - * On success the port is ready to use and the line number is returned. - */ -int serial8250_register_port(struct uart_port *port) -{ - struct uart_8250_port *uart; - int ret = -ENOSPC; - - if (port->uartclk == 0) - return -EINVAL; - - mutex_lock(&serial_mutex); - - uart = serial8250_find_match_or_unused(port); - if (uart) { - uart_remove_one_port(&serial8250_reg, &uart->port); - - uart->port.iobase = port->iobase; - uart->port.membase = port->membase; - uart->port.irq = port->irq; - uart->port.irqflags = port->irqflags; - uart->port.uartclk = port->uartclk; - uart->port.fifosize = port->fifosize; - uart->port.regshift = port->regshift; - uart->port.iotype = port->iotype; - uart->port.flags = port->flags | UPF_BOOT_AUTOCONF; - uart->port.mapbase = port->mapbase; - uart->port.private_data = port->private_data; - if (port->dev) - uart->port.dev = port->dev; - - if (port->flags & UPF_FIXED_TYPE) - serial8250_init_fixed_type_port(uart, port->type); - - set_io_from_upio(&uart->port); - /* Possibly override default I/O functions. */ - if (port->serial_in) - uart->port.serial_in = port->serial_in; - if (port->serial_out) - uart->port.serial_out = port->serial_out; - /* Possibly override set_termios call */ - if (port->set_termios) - uart->port.set_termios = port->set_termios; - if (port->pm) - uart->port.pm = port->pm; - - if (serial8250_isa_config != NULL) - serial8250_isa_config(0, &uart->port, - &uart->capabilities); - - ret = uart_add_one_port(&serial8250_reg, &uart->port); - if (ret == 0) - ret = uart->port.line; - } - mutex_unlock(&serial_mutex); - - return ret; -} -EXPORT_SYMBOL(serial8250_register_port); - -/** - * serial8250_unregister_port - remove a 16x50 serial port at runtime - * @line: serial line number - * - * Remove one serial port. This may not be called from interrupt - * context. We hand the port back to the our control. - */ -void serial8250_unregister_port(int line) -{ - struct uart_8250_port *uart = &serial8250_ports[line]; - - mutex_lock(&serial_mutex); - uart_remove_one_port(&serial8250_reg, &uart->port); - if (serial8250_isa_devs) { - uart->port.flags &= ~UPF_BOOT_AUTOCONF; - uart->port.type = PORT_UNKNOWN; - uart->port.dev = &serial8250_isa_devs->dev; - uart_add_one_port(&serial8250_reg, &uart->port); - } else { - uart->port.dev = NULL; - } - mutex_unlock(&serial_mutex); -} -EXPORT_SYMBOL(serial8250_unregister_port); - -static int __init serial8250_init(void) -{ - int ret; - - if (nr_uarts > UART_NR) - nr_uarts = UART_NR; - - printk(KERN_INFO "Serial: 8250/16550 driver, " - "%d ports, IRQ sharing %sabled\n", nr_uarts, - share_irqs ? "en" : "dis"); - -#ifdef CONFIG_SPARC - ret = sunserial_register_minors(&serial8250_reg, UART_NR); -#else - serial8250_reg.nr = UART_NR; - ret = uart_register_driver(&serial8250_reg); -#endif - if (ret) - goto out; - - serial8250_isa_devs = platform_device_alloc("serial8250", - PLAT8250_DEV_LEGACY); - if (!serial8250_isa_devs) { - ret = -ENOMEM; - goto unreg_uart_drv; - } - - ret = platform_device_add(serial8250_isa_devs); - if (ret) - goto put_dev; - - serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev); - - ret = platform_driver_register(&serial8250_isa_driver); - if (ret == 0) - goto out; - - platform_device_del(serial8250_isa_devs); -put_dev: - platform_device_put(serial8250_isa_devs); -unreg_uart_drv: -#ifdef CONFIG_SPARC - sunserial_unregister_minors(&serial8250_reg, UART_NR); -#else - uart_unregister_driver(&serial8250_reg); -#endif -out: - return ret; -} - -static void __exit serial8250_exit(void) -{ - struct platform_device *isa_dev = serial8250_isa_devs; - - /* - * This tells serial8250_unregister_port() not to re-register - * the ports (thereby making serial8250_isa_driver permanently - * in use.) - */ - serial8250_isa_devs = NULL; - - platform_driver_unregister(&serial8250_isa_driver); - platform_device_unregister(isa_dev); - -#ifdef CONFIG_SPARC - sunserial_unregister_minors(&serial8250_reg, UART_NR); -#else - uart_unregister_driver(&serial8250_reg); -#endif -} - -module_init(serial8250_init); -module_exit(serial8250_exit); - -EXPORT_SYMBOL(serial8250_suspend_port); -EXPORT_SYMBOL(serial8250_resume_port); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Generic 8250/16x50 serial driver"); - -module_param(share_irqs, uint, 0644); -MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices" - " (unsafe)"); - -module_param(nr_uarts, uint, 0644); -MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); - -module_param(skip_txen_test, uint, 0644); -MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time"); - -#ifdef CONFIG_SERIAL_8250_RSA -module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); -MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); -#endif -MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h deleted file mode 100644 index 6e19ea3e48d5..000000000000 --- a/drivers/serial/8250.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * linux/drivers/char/8250.h - * - * Driver for 8250/16550-type serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright (C) 2001 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include - -struct old_serial_port { - unsigned int uart; - unsigned int baud_base; - unsigned int port; - unsigned int irq; - unsigned int flags; - unsigned char hub6; - unsigned char io_type; - unsigned char *iomem_base; - unsigned short iomem_reg_shift; - unsigned long irqflags; -}; - -/* - * This replaces serial_uart_config in include/linux/serial.h - */ -struct serial8250_config { - const char *name; - unsigned short fifo_size; - unsigned short tx_loadsz; - unsigned char fcr; - unsigned int flags; -}; - -#define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ -#define UART_CAP_EFR (1 << 9) /* UART has EFR */ -#define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */ -#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ -#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ - -#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ -#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ -#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ -#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ - -#define PROBE_RSA (1 << 0) -#define PROBE_ANY (~0) - -#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) - -#ifdef CONFIG_SERIAL_8250_SHARE_IRQ -#define SERIAL8250_SHARE_IRQS 1 -#else -#define SERIAL8250_SHARE_IRQS 0 -#endif - -#if defined(__alpha__) && !defined(CONFIG_PCI) -/* - * Digital did something really horribly wrong with the OUT1 and OUT2 - * lines on at least some ALPHA's. The failure mode is that if either - * is cleared, the machine locks up with endless interrupts. - */ -#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1) -#elif defined(CONFIG_SBC8560) -/* - * WindRiver did something similarly broken on their SBC8560 board. The - * UART tristates its IRQ output while OUT2 is clear, but they pulled - * the interrupt line _up_ instead of down, so if we register the IRQ - * while the UART is in that state, we die in an IRQ storm. */ -#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) -#else -#define ALPHA_KLUDGE_MCR 0 -#endif diff --git a/drivers/serial/8250_accent.c b/drivers/serial/8250_accent.c deleted file mode 100644 index 9c10262f2469..000000000000 --- a/drivers/serial/8250_accent.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * linux/drivers/serial/8250_accent.c - * - * Copyright (C) 2005 Russell King. - * Data taken from include/asm-i386/serial.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#define PORT(_base,_irq) \ - { \ - .iobase = _base, \ - .irq = _irq, \ - .uartclk = 1843200, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF, \ - } - -static struct plat_serial8250_port accent_data[] = { - PORT(0x330, 4), - PORT(0x338, 4), - { }, -}; - -static struct platform_device accent_device = { - .name = "serial8250", - .id = PLAT8250_DEV_ACCENT, - .dev = { - .platform_data = accent_data, - }, -}; - -static int __init accent_init(void) -{ - return platform_device_register(&accent_device); -} - -module_init(accent_init); - -MODULE_AUTHOR("Russell King"); -MODULE_DESCRIPTION("8250 serial probe module for Accent Async cards"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_acorn.c b/drivers/serial/8250_acorn.c deleted file mode 100644 index b0ce8c56f1a4..000000000000 --- a/drivers/serial/8250_acorn.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * linux/drivers/serial/acorn.c - * - * Copyright (C) 1996-2003 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "8250.h" - -#define MAX_PORTS 3 - -struct serial_card_type { - unsigned int num_ports; - unsigned int uartclk; - unsigned int type; - unsigned int offset[MAX_PORTS]; -}; - -struct serial_card_info { - unsigned int num_ports; - int ports[MAX_PORTS]; - void __iomem *vaddr; -}; - -static int __devinit -serial_card_probe(struct expansion_card *ec, const struct ecard_id *id) -{ - struct serial_card_info *info; - struct serial_card_type *type = id->data; - struct uart_port port; - unsigned long bus_addr; - unsigned int i; - - info = kzalloc(sizeof(struct serial_card_info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - info->num_ports = type->num_ports; - - bus_addr = ecard_resource_start(ec, type->type); - info->vaddr = ecardm_iomap(ec, type->type, 0, 0); - if (!info->vaddr) { - kfree(info); - return -ENOMEM; - } - - ecard_set_drvdata(ec, info); - - memset(&port, 0, sizeof(struct uart_port)); - port.irq = ec->irq; - port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; - port.uartclk = type->uartclk; - port.iotype = UPIO_MEM; - port.regshift = 2; - port.dev = &ec->dev; - - for (i = 0; i < info->num_ports; i ++) { - port.membase = info->vaddr + type->offset[i]; - port.mapbase = bus_addr + type->offset[i]; - - info->ports[i] = serial8250_register_port(&port); - } - - return 0; -} - -static void __devexit serial_card_remove(struct expansion_card *ec) -{ - struct serial_card_info *info = ecard_get_drvdata(ec); - int i; - - ecard_set_drvdata(ec, NULL); - - for (i = 0; i < info->num_ports; i++) - if (info->ports[i] > 0) - serial8250_unregister_port(info->ports[i]); - - kfree(info); -} - -static struct serial_card_type atomwide_type = { - .num_ports = 3, - .uartclk = 7372800, - .type = ECARD_RES_IOCSLOW, - .offset = { 0x2800, 0x2400, 0x2000 }, -}; - -static struct serial_card_type serport_type = { - .num_ports = 2, - .uartclk = 3686400, - .type = ECARD_RES_IOCSLOW, - .offset = { 0x2000, 0x2020 }, -}; - -static const struct ecard_id serial_cids[] = { - { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, &atomwide_type }, - { MANU_SERPORT, PROD_SERPORT_DSPORT, &serport_type }, - { 0xffff, 0xffff } -}; - -static struct ecard_driver serial_card_driver = { - .probe = serial_card_probe, - .remove = __devexit_p(serial_card_remove), - .id_table = serial_cids, - .drv = { - .name = "8250_acorn", - }, -}; - -static int __init serial_card_init(void) -{ - return ecard_register_driver(&serial_card_driver); -} - -static void __exit serial_card_exit(void) -{ - ecard_remove_driver(&serial_card_driver); -} - -MODULE_AUTHOR("Russell King"); -MODULE_DESCRIPTION("Acorn 8250-compatible serial port expansion card driver"); -MODULE_LICENSE("GPL"); - -module_init(serial_card_init); -module_exit(serial_card_exit); diff --git a/drivers/serial/8250_boca.c b/drivers/serial/8250_boca.c deleted file mode 100644 index 3bfe0f7b26fb..000000000000 --- a/drivers/serial/8250_boca.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * linux/drivers/serial/8250_boca.c - * - * Copyright (C) 2005 Russell King. - * Data taken from include/asm-i386/serial.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#define PORT(_base,_irq) \ - { \ - .iobase = _base, \ - .irq = _irq, \ - .uartclk = 1843200, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF, \ - } - -static struct plat_serial8250_port boca_data[] = { - PORT(0x100, 12), - PORT(0x108, 12), - PORT(0x110, 12), - PORT(0x118, 12), - PORT(0x120, 12), - PORT(0x128, 12), - PORT(0x130, 12), - PORT(0x138, 12), - PORT(0x140, 12), - PORT(0x148, 12), - PORT(0x150, 12), - PORT(0x158, 12), - PORT(0x160, 12), - PORT(0x168, 12), - PORT(0x170, 12), - PORT(0x178, 12), - { }, -}; - -static struct platform_device boca_device = { - .name = "serial8250", - .id = PLAT8250_DEV_BOCA, - .dev = { - .platform_data = boca_data, - }, -}; - -static int __init boca_init(void) -{ - return platform_device_register(&boca_device); -} - -module_init(boca_init); - -MODULE_AUTHOR("Russell King"); -MODULE_DESCRIPTION("8250 serial probe module for Boca cards"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c deleted file mode 100644 index eaafb98debed..000000000000 --- a/drivers/serial/8250_early.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * Early serial console for 8250/16550 devices - * - * (c) Copyright 2004 Hewlett-Packard Development Company, L.P. - * Bjorn Helgaas - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Based on the 8250.c serial driver, Copyright (C) 2001 Russell King, - * and on early_printk.c by Andi Kleen. - * - * This is for use before the serial driver has initialized, in - * particular, before the UARTs have been discovered and named. - * Instead of specifying the console device as, e.g., "ttyS0", - * we locate the device directly by its MMIO or I/O port address. - * - * The user can specify the device directly, e.g., - * earlycon=uart8250,io,0x3f8,9600n8 - * earlycon=uart8250,mmio,0xff5e0000,115200n8 - * earlycon=uart8250,mmio32,0xff5e0000,115200n8 - * or - * console=uart8250,io,0x3f8,9600n8 - * console=uart8250,mmio,0xff5e0000,115200n8 - * console=uart8250,mmio32,0xff5e0000,115200n8 - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_FIX_EARLYCON_MEM -#include -#include -#endif - -struct early_serial8250_device { - struct uart_port port; - char options[16]; /* e.g., 115200n8 */ - unsigned int baud; -}; - -static struct early_serial8250_device early_device; - -static unsigned int __init serial_in(struct uart_port *port, int offset) -{ - switch (port->iotype) { - case UPIO_MEM: - return readb(port->membase + offset); - case UPIO_MEM32: - return readl(port->membase + (offset << 2)); - case UPIO_PORT: - return inb(port->iobase + offset); - default: - return 0; - } -} - -static void __init serial_out(struct uart_port *port, int offset, int value) -{ - switch (port->iotype) { - case UPIO_MEM: - writeb(value, port->membase + offset); - break; - case UPIO_MEM32: - writel(value, port->membase + (offset << 2)); - break; - case UPIO_PORT: - outb(value, port->iobase + offset); - break; - } -} - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -static void __init wait_for_xmitr(struct uart_port *port) -{ - unsigned int status; - - for (;;) { - status = serial_in(port, UART_LSR); - if ((status & BOTH_EMPTY) == BOTH_EMPTY) - return; - cpu_relax(); - } -} - -static void __init serial_putc(struct uart_port *port, int c) -{ - wait_for_xmitr(port); - serial_out(port, UART_TX, c); -} - -static void __init early_serial8250_write(struct console *console, - const char *s, unsigned int count) -{ - struct uart_port *port = &early_device.port; - unsigned int ier; - - /* Save the IER and disable interrupts */ - ier = serial_in(port, UART_IER); - serial_out(port, UART_IER, 0); - - uart_console_write(port, s, count, serial_putc); - - /* Wait for transmitter to become empty and restore the IER */ - wait_for_xmitr(port); - serial_out(port, UART_IER, ier); -} - -static unsigned int __init probe_baud(struct uart_port *port) -{ - unsigned char lcr, dll, dlm; - unsigned int quot; - - lcr = serial_in(port, UART_LCR); - serial_out(port, UART_LCR, lcr | UART_LCR_DLAB); - dll = serial_in(port, UART_DLL); - dlm = serial_in(port, UART_DLM); - serial_out(port, UART_LCR, lcr); - - quot = (dlm << 8) | dll; - return (port->uartclk / 16) / quot; -} - -static void __init init_port(struct early_serial8250_device *device) -{ - struct uart_port *port = &device->port; - unsigned int divisor; - unsigned char c; - - serial_out(port, UART_LCR, 0x3); /* 8n1 */ - serial_out(port, UART_IER, 0); /* no interrupt */ - serial_out(port, UART_FCR, 0); /* no fifo */ - serial_out(port, UART_MCR, 0x3); /* DTR + RTS */ - - divisor = port->uartclk / (16 * device->baud); - c = serial_in(port, UART_LCR); - serial_out(port, UART_LCR, c | UART_LCR_DLAB); - serial_out(port, UART_DLL, divisor & 0xff); - serial_out(port, UART_DLM, (divisor >> 8) & 0xff); - serial_out(port, UART_LCR, c & ~UART_LCR_DLAB); -} - -static int __init parse_options(struct early_serial8250_device *device, - char *options) -{ - struct uart_port *port = &device->port; - int mmio, mmio32, length; - - if (!options) - return -ENODEV; - - port->uartclk = BASE_BAUD * 16; - - mmio = !strncmp(options, "mmio,", 5); - mmio32 = !strncmp(options, "mmio32,", 7); - if (mmio || mmio32) { - port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32); - port->mapbase = simple_strtoul(options + (mmio ? 5 : 7), - &options, 0); - if (mmio32) - port->regshift = 2; -#ifdef CONFIG_FIX_EARLYCON_MEM - set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, - port->mapbase & PAGE_MASK); - port->membase = - (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); - port->membase += port->mapbase & ~PAGE_MASK; -#else - port->membase = ioremap_nocache(port->mapbase, 64); - if (!port->membase) { - printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n", - __func__, - (unsigned long long) port->mapbase); - return -ENOMEM; - } -#endif - } else if (!strncmp(options, "io,", 3)) { - port->iotype = UPIO_PORT; - port->iobase = simple_strtoul(options + 3, &options, 0); - mmio = 0; - } else - return -EINVAL; - - options = strchr(options, ','); - if (options) { - options++; - device->baud = simple_strtoul(options, NULL, 0); - length = min(strcspn(options, " "), sizeof(device->options)); - strncpy(device->options, options, length); - } else { - device->baud = probe_baud(port); - snprintf(device->options, sizeof(device->options), "%u", - device->baud); - } - - if (mmio || mmio32) - printk(KERN_INFO - "Early serial console at MMIO%s 0x%llx (options '%s')\n", - mmio32 ? "32" : "", - (unsigned long long)port->mapbase, - device->options); - else - printk(KERN_INFO - "Early serial console at I/O port 0x%lx (options '%s')\n", - port->iobase, - device->options); - - return 0; -} - -static struct console early_serial8250_console __initdata = { - .name = "uart", - .write = early_serial8250_write, - .flags = CON_PRINTBUFFER | CON_BOOT, - .index = -1, -}; - -static int __init early_serial8250_setup(char *options) -{ - struct early_serial8250_device *device = &early_device; - int err; - - if (device->port.membase || device->port.iobase) - return 0; - - err = parse_options(device, options); - if (err < 0) - return err; - - init_port(device); - return 0; -} - -int __init setup_early_serial8250_console(char *cmdline) -{ - char *options; - int err; - - options = strstr(cmdline, "uart8250,"); - if (!options) { - options = strstr(cmdline, "uart,"); - if (!options) - return 0; - } - - options = strchr(cmdline, ',') + 1; - err = early_serial8250_setup(options); - if (err < 0) - return err; - - register_console(&early_serial8250_console); - - return 0; -} - -int serial8250_find_port_for_earlycon(void) -{ - struct early_serial8250_device *device = &early_device; - struct uart_port *port = &device->port; - int line; - int ret; - - if (!device->port.membase && !device->port.iobase) - return -ENODEV; - - line = serial8250_find_port(port); - if (line < 0) - return -ENODEV; - - ret = update_console_cmdline("uart", 8250, - "ttyS", line, device->options); - if (ret < 0) - ret = update_console_cmdline("uart", 0, - "ttyS", line, device->options); - - return ret; -} - -early_param("earlycon", setup_early_serial8250_console); diff --git a/drivers/serial/8250_exar_st16c554.c b/drivers/serial/8250_exar_st16c554.c deleted file mode 100644 index 567143ace159..000000000000 --- a/drivers/serial/8250_exar_st16c554.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * linux/drivers/serial/8250_exar.c - * - * Written by Paul B Schroeder < pschroeder "at" uplogix "dot" com > - * Based on 8250_boca. - * - * Copyright (C) 2005 Russell King. - * Data taken from include/asm-i386/serial.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#define PORT(_base,_irq) \ - { \ - .iobase = _base, \ - .irq = _irq, \ - .uartclk = 1843200, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF, \ - } - -static struct plat_serial8250_port exar_data[] = { - PORT(0x100, 5), - PORT(0x108, 5), - PORT(0x110, 5), - PORT(0x118, 5), - { }, -}; - -static struct platform_device exar_device = { - .name = "serial8250", - .id = PLAT8250_DEV_EXAR_ST16C554, - .dev = { - .platform_data = exar_data, - }, -}; - -static int __init exar_init(void) -{ - return platform_device_register(&exar_device); -} - -module_init(exar_init); - -MODULE_AUTHOR("Paul B Schroeder"); -MODULE_DESCRIPTION("8250 serial probe module for Exar cards"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_fourport.c b/drivers/serial/8250_fourport.c deleted file mode 100644 index 6375d68b7913..000000000000 --- a/drivers/serial/8250_fourport.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * linux/drivers/serial/8250_fourport.c - * - * Copyright (C) 2005 Russell King. - * Data taken from include/asm-i386/serial.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#define PORT(_base,_irq) \ - { \ - .iobase = _base, \ - .irq = _irq, \ - .uartclk = 1843200, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF | UPF_FOURPORT, \ - } - -static struct plat_serial8250_port fourport_data[] = { - PORT(0x1a0, 9), - PORT(0x1a8, 9), - PORT(0x1b0, 9), - PORT(0x1b8, 9), - PORT(0x2a0, 5), - PORT(0x2a8, 5), - PORT(0x2b0, 5), - PORT(0x2b8, 5), - { }, -}; - -static struct platform_device fourport_device = { - .name = "serial8250", - .id = PLAT8250_DEV_FOURPORT, - .dev = { - .platform_data = fourport_data, - }, -}; - -static int __init fourport_init(void) -{ - return platform_device_register(&fourport_device); -} - -module_init(fourport_init); - -MODULE_AUTHOR("Russell King"); -MODULE_DESCRIPTION("8250 serial probe module for AST Fourport cards"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c deleted file mode 100644 index d8c0ffbfa6e3..000000000000 --- a/drivers/serial/8250_gsc.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Serial Device Initialisation for Lasi/Asp/Wax/Dino - * - * (c) Copyright Matthew Wilcox 2001-2002 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "8250.h" - -static int __init serial_init_chip(struct parisc_device *dev) -{ - struct uart_port port; - unsigned long address; - int err; - - if (!dev->irq) { - /* We find some unattached serial ports by walking native - * busses. These should be silently ignored. Otherwise, - * what we have here is a missing parent device, so tell - * the user what they're missing. - */ - if (parisc_parent(dev)->id.hw_type != HPHW_IOA) - printk(KERN_INFO - "Serial: device 0x%llx not configured.\n" - "Enable support for Wax, Lasi, Asp or Dino.\n", - (unsigned long long)dev->hpa.start); - return -ENODEV; - } - - address = dev->hpa.start; - if (dev->id.sversion != 0x8d) - address += 0x800; - - memset(&port, 0, sizeof(port)); - port.iotype = UPIO_MEM; - /* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */ - port.uartclk = 7272727; - port.mapbase = address; - port.membase = ioremap_nocache(address, 16); - port.irq = dev->irq; - port.flags = UPF_BOOT_AUTOCONF; - port.dev = &dev->dev; - - err = serial8250_register_port(&port); - if (err < 0) { - printk(KERN_WARNING - "serial8250_register_port returned error %d\n", err); - iounmap(port.membase); - return err; - } - - return 0; -} - -static struct parisc_device_id serial_tbl[] = { - { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 }, - { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c }, - { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d }, - { 0 } -}; - -/* Hack. Some machines have SERIAL_0 attached to Lasi and SERIAL_1 - * attached to Dino. Unfortunately, Dino appears before Lasi in the device - * tree. To ensure that ttyS0 == SERIAL_0, we register two drivers; one - * which only knows about Lasi and then a second which will find all the - * other serial ports. HPUX ignores this problem. - */ -static struct parisc_device_id lasi_tbl[] = { - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03B, 0x0008C }, /* C1xx/C1xxL */ - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03C, 0x0008C }, /* B132L */ - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03D, 0x0008C }, /* B160L */ - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03E, 0x0008C }, /* B132L+ */ - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03F, 0x0008C }, /* B180L+ */ - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x046, 0x0008C }, /* Rocky2 120 */ - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x047, 0x0008C }, /* Rocky2 150 */ - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x04E, 0x0008C }, /* Kiji L2 132 */ - { HPHW_FIO, HVERSION_REV_ANY_ID, 0x056, 0x0008C }, /* Raven+ */ - { 0 } -}; - - -MODULE_DEVICE_TABLE(parisc, serial_tbl); - -static struct parisc_driver lasi_driver = { - .name = "serial_1", - .id_table = lasi_tbl, - .probe = serial_init_chip, -}; - -static struct parisc_driver serial_driver = { - .name = "serial", - .id_table = serial_tbl, - .probe = serial_init_chip, -}; - -static int __init probe_serial_gsc(void) -{ - register_parisc_driver(&lasi_driver); - register_parisc_driver(&serial_driver); - return 0; -} - -module_init(probe_serial_gsc); - -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_hp300.c b/drivers/serial/8250_hp300.c deleted file mode 100644 index c13438c93012..000000000000 --- a/drivers/serial/8250_hp300.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - * Driver for the 98626/98644/internal serial interface on hp300/hp400 - * (based on the National Semiconductor INS8250/NS16550AF/WD16C552 UARTs) - * - * Ported from 2.2 and modified to use the normal 8250 driver - * by Kars de Jong , May 2004. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "8250.h" - -#if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI) -#warning CONFIG_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure? -#endif - -#ifdef CONFIG_HPAPCI -struct hp300_port -{ - struct hp300_port *next; /* next port */ - int line; /* line (tty) number */ -}; - -static struct hp300_port *hp300_ports; -#endif - -#ifdef CONFIG_HPDCA - -static int __devinit hpdca_init_one(struct dio_dev *d, - const struct dio_device_id *ent); -static void __devexit hpdca_remove_one(struct dio_dev *d); - -static struct dio_device_id hpdca_dio_tbl[] = { - { DIO_ID_DCA0 }, - { DIO_ID_DCA0REM }, - { DIO_ID_DCA1 }, - { DIO_ID_DCA1REM }, - { 0 } -}; - -static struct dio_driver hpdca_driver = { - .name = "hpdca", - .id_table = hpdca_dio_tbl, - .probe = hpdca_init_one, - .remove = __devexit_p(hpdca_remove_one), -}; - -#endif - -static unsigned int num_ports; - -extern int hp300_uart_scode; - -/* Offset to UART registers from base of DCA */ -#define UART_OFFSET 17 - -#define DCA_ID 0x01 /* ID (read), reset (write) */ -#define DCA_IC 0x03 /* Interrupt control */ - -/* Interrupt control */ -#define DCA_IC_IE 0x80 /* Master interrupt enable */ - -#define HPDCA_BAUD_BASE 153600 - -/* Base address of the Frodo part */ -#define FRODO_BASE (0x41c000) - -/* - * Where we find the 8250-like APCI ports, and how far apart they are. - */ -#define FRODO_APCIBASE 0x0 -#define FRODO_APCISPACE 0x20 -#define FRODO_APCI_OFFSET(x) (FRODO_APCIBASE + ((x) * FRODO_APCISPACE)) - -#define HPAPCI_BAUD_BASE 500400 - -#ifdef CONFIG_SERIAL_8250_CONSOLE -/* - * Parse the bootinfo to find descriptions for headless console and - * debug serial ports and register them with the 8250 driver. - * This function should be called before serial_console_init() is called - * to make sure the serial console will be available for use. IA-64 kernel - * calls this function from setup_arch() after the EFI and ACPI tables have - * been parsed. - */ -int __init hp300_setup_serial_console(void) -{ - int scode; - struct uart_port port; - - memset(&port, 0, sizeof(port)); - - if (hp300_uart_scode < 0 || hp300_uart_scode > DIO_SCMAX) - return 0; - - if (DIO_SCINHOLE(hp300_uart_scode)) - return 0; - - scode = hp300_uart_scode; - - /* Memory mapped I/O */ - port.iotype = UPIO_MEM; - port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; - port.type = PORT_UNKNOWN; - - /* Check for APCI console */ - if (scode == 256) { -#ifdef CONFIG_HPAPCI - printk(KERN_INFO "Serial console is HP APCI 1\n"); - - port.uartclk = HPAPCI_BAUD_BASE * 16; - port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1)); - port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); - port.regshift = 2; - add_preferred_console("ttyS", port.line, "9600n8"); -#else - printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n"); - return 0; -#endif - } else { -#ifdef CONFIG_HPDCA - unsigned long pa = dio_scodetophysaddr(scode); - if (!pa) - return 0; - - printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode); - - port.uartclk = HPDCA_BAUD_BASE * 16; - port.mapbase = (pa + UART_OFFSET); - port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); - port.regshift = 1; - port.irq = DIO_IPL(pa + DIO_VIRADDRBASE); - - /* Enable board-interrupts */ - out_8(pa + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE); - - if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80) - add_preferred_console("ttyS", port.line, "9600n8"); -#else - printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n"); - return 0; -#endif - } - - if (early_serial_setup(&port) < 0) - printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n"); - return 0; -} -#endif /* CONFIG_SERIAL_8250_CONSOLE */ - -#ifdef CONFIG_HPDCA -static int __devinit hpdca_init_one(struct dio_dev *d, - const struct dio_device_id *ent) -{ - struct uart_port port; - int line; - -#ifdef CONFIG_SERIAL_8250_CONSOLE - if (hp300_uart_scode == d->scode) { - /* Already got it. */ - return 0; - } -#endif - memset(&port, 0, sizeof(struct uart_port)); - - /* Memory mapped I/O */ - port.iotype = UPIO_MEM; - port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; - port.irq = d->ipl; - port.uartclk = HPDCA_BAUD_BASE * 16; - port.mapbase = (d->resource.start + UART_OFFSET); - port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); - port.regshift = 1; - port.dev = &d->dev; - line = serial8250_register_port(&port); - - if (line < 0) { - printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d" - " irq %d failed\n", d->scode, port.irq); - return -ENOMEM; - } - - /* Enable board-interrupts */ - out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE); - dio_set_drvdata(d, (void *)line); - - /* Reset the DCA */ - out_8(d->resource.start + DIO_VIRADDRBASE + DCA_ID, 0xff); - udelay(100); - - num_ports++; - - return 0; -} -#endif - -static int __init hp300_8250_init(void) -{ - static int called; -#ifdef CONFIG_HPAPCI - int line; - unsigned long base; - struct uart_port uport; - struct hp300_port *port; - int i; -#endif - if (called) - return -ENODEV; - called = 1; - - if (!MACH_IS_HP300) - return -ENODEV; - -#ifdef CONFIG_HPDCA - dio_register_driver(&hpdca_driver); -#endif -#ifdef CONFIG_HPAPCI - if (hp300_model < HP_400) { - if (!num_ports) - return -ENODEV; - return 0; - } - /* These models have the Frodo chip. - * Port 0 is reserved for the Apollo Domain keyboard. - * Port 1 is either the console or the DCA. - */ - for (i = 1; i < 4; i++) { - /* Port 1 is the console on a 425e, on other machines it's - * mapped to DCA. - */ -#ifdef CONFIG_SERIAL_8250_CONSOLE - if (i == 1) - continue; -#endif - - /* Create new serial device */ - port = kmalloc(sizeof(struct hp300_port), GFP_KERNEL); - if (!port) - return -ENOMEM; - - memset(&uport, 0, sizeof(struct uart_port)); - - base = (FRODO_BASE + FRODO_APCI_OFFSET(i)); - - /* Memory mapped I/O */ - uport.iotype = UPIO_MEM; - uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \ - | UPF_BOOT_AUTOCONF; - /* XXX - no interrupt support yet */ - uport.irq = 0; - uport.uartclk = HPAPCI_BAUD_BASE * 16; - uport.mapbase = base; - uport.membase = (char *)(base + DIO_VIRADDRBASE); - uport.regshift = 2; - - line = serial8250_register_port(&uport); - - if (line < 0) { - printk(KERN_NOTICE "8250_hp300: register_serial() APCI" - " %d irq %d failed\n", i, uport.irq); - kfree(port); - continue; - } - - port->line = line; - port->next = hp300_ports; - hp300_ports = port; - - num_ports++; - } -#endif - - /* Any boards found? */ - if (!num_ports) - return -ENODEV; - - return 0; -} - -#ifdef CONFIG_HPDCA -static void __devexit hpdca_remove_one(struct dio_dev *d) -{ - int line; - - line = (int) dio_get_drvdata(d); - if (d->resource.start) { - /* Disable board-interrupts */ - out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, 0); - } - serial8250_unregister_port(line); -} -#endif - -static void __exit hp300_8250_exit(void) -{ -#ifdef CONFIG_HPAPCI - struct hp300_port *port, *to_free; - - for (port = hp300_ports; port; ) { - serial8250_unregister_port(port->line); - to_free = port; - port = port->next; - kfree(to_free); - } - - hp300_ports = NULL; -#endif -#ifdef CONFIG_HPDCA - dio_unregister_driver(&hpdca_driver); -#endif -} - -module_init(hp300_8250_init); -module_exit(hp300_8250_exit); -MODULE_DESCRIPTION("HP DCA/APCI serial driver"); -MODULE_AUTHOR("Kars de Jong "); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_hub6.c b/drivers/serial/8250_hub6.c deleted file mode 100644 index 7609150e7d5e..000000000000 --- a/drivers/serial/8250_hub6.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * linux/drivers/serial/8250_hub6.c - * - * Copyright (C) 2005 Russell King. - * Data taken from include/asm-i386/serial.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#define HUB6(card,port) \ - { \ - .iobase = 0x302, \ - .irq = 3, \ - .uartclk = 1843200, \ - .iotype = UPIO_HUB6, \ - .flags = UPF_BOOT_AUTOCONF, \ - .hub6 = (card) << 6 | (port) << 3 | 1, \ - } - -static struct plat_serial8250_port hub6_data[] = { - HUB6(0, 0), - HUB6(0, 1), - HUB6(0, 2), - HUB6(0, 3), - HUB6(0, 4), - HUB6(0, 5), - HUB6(1, 0), - HUB6(1, 1), - HUB6(1, 2), - HUB6(1, 3), - HUB6(1, 4), - HUB6(1, 5), - { }, -}; - -static struct platform_device hub6_device = { - .name = "serial8250", - .id = PLAT8250_DEV_HUB6, - .dev = { - .platform_data = hub6_data, - }, -}; - -static int __init hub6_init(void) -{ - return platform_device_register(&hub6_device); -} - -module_init(hub6_init); - -MODULE_AUTHOR("Russell King"); -MODULE_DESCRIPTION("8250 serial probe module for Hub6 cards"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_mca.c b/drivers/serial/8250_mca.c deleted file mode 100644 index d10be944ad44..000000000000 --- a/drivers/serial/8250_mca.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/drivers/serial/8250_mca.c - * - * Copyright (C) 2005 Russell King. - * Data taken from include/asm-i386/serial.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include - -/* - * FIXME: Should we be doing AUTO_IRQ here? - */ -#ifdef CONFIG_SERIAL_8250_DETECT_IRQ -#define MCA_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ -#else -#define MCA_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST -#endif - -#define PORT(_base,_irq) \ - { \ - .iobase = _base, \ - .irq = _irq, \ - .uartclk = 1843200, \ - .iotype = UPIO_PORT, \ - .flags = MCA_FLAGS, \ - } - -static struct plat_serial8250_port mca_data[] = { - PORT(0x3220, 3), - PORT(0x3228, 3), - PORT(0x4220, 3), - PORT(0x4228, 3), - PORT(0x5220, 3), - PORT(0x5228, 3), - { }, -}; - -static struct platform_device mca_device = { - .name = "serial8250", - .id = PLAT8250_DEV_MCA, - .dev = { - .platform_data = mca_data, - }, -}; - -static int __init mca_init(void) -{ - if (!MCA_bus) - return -ENODEV; - return platform_device_register(&mca_device); -} - -module_init(mca_init); - -MODULE_AUTHOR("Russell King"); -MODULE_DESCRIPTION("8250 serial probe module for MCA ports"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c deleted file mode 100644 index 8b8930f700b5..000000000000 --- a/drivers/serial/8250_pci.c +++ /dev/null @@ -1,3850 +0,0 @@ -/* - * linux/drivers/char/8250_pci.c - * - * Probe module for 8250/16550-type PCI serial ports. - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright (C) 2001 Russell King, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "8250.h" - -#undef SERIAL_DEBUG_PCI - -/* - * init function returns: - * > 0 - number of ports - * = 0 - use board->num_ports - * < 0 - error - */ -struct pci_serial_quirk { - u32 vendor; - u32 device; - u32 subvendor; - u32 subdevice; - int (*init)(struct pci_dev *dev); - int (*setup)(struct serial_private *, - const struct pciserial_board *, - struct uart_port *, int); - void (*exit)(struct pci_dev *dev); -}; - -#define PCI_NUM_BAR_RESOURCES 6 - -struct serial_private { - struct pci_dev *dev; - unsigned int nr; - void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES]; - struct pci_serial_quirk *quirk; - int line[0]; -}; - -static void moan_device(const char *str, struct pci_dev *dev) -{ - printk(KERN_WARNING - "%s: %s\n" - "Please send the output of lspci -vv, this\n" - "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" - "manufacturer and name of serial board or\n" - "modem board to rmk+serial@arm.linux.org.uk.\n", - pci_name(dev), str, dev->vendor, dev->device, - dev->subsystem_vendor, dev->subsystem_device); -} - -static int -setup_port(struct serial_private *priv, struct uart_port *port, - int bar, int offset, int regshift) -{ - struct pci_dev *dev = priv->dev; - unsigned long base, len; - - if (bar >= PCI_NUM_BAR_RESOURCES) - return -EINVAL; - - base = pci_resource_start(dev, bar); - - if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { - len = pci_resource_len(dev, bar); - - if (!priv->remapped_bar[bar]) - priv->remapped_bar[bar] = ioremap_nocache(base, len); - if (!priv->remapped_bar[bar]) - return -ENOMEM; - - port->iotype = UPIO_MEM; - port->iobase = 0; - port->mapbase = base + offset; - port->membase = priv->remapped_bar[bar] + offset; - port->regshift = regshift; - } else { - port->iotype = UPIO_PORT; - port->iobase = base + offset; - port->mapbase = 0; - port->membase = NULL; - port->regshift = 0; - } - return 0; -} - -/* - * ADDI-DATA GmbH communication cards - */ -static int addidata_apci7800_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - unsigned int bar = 0, offset = board->first_offset; - bar = FL_GET_BASE(board->flags); - - if (idx < 2) { - offset += idx * board->uart_offset; - } else if ((idx >= 2) && (idx < 4)) { - bar += 1; - offset += ((idx - 2) * board->uart_offset); - } else if ((idx >= 4) && (idx < 6)) { - bar += 2; - offset += ((idx - 4) * board->uart_offset); - } else if (idx >= 6) { - bar += 3; - offset += ((idx - 6) * board->uart_offset); - } - - return setup_port(priv, port, bar, offset, board->reg_shift); -} - -/* - * AFAVLAB uses a different mixture of BARs and offsets - * Not that ugly ;) -- HW - */ -static int -afavlab_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - unsigned int bar, offset = board->first_offset; - - bar = FL_GET_BASE(board->flags); - if (idx < 4) - bar += idx; - else { - bar = 4; - offset += (idx - 4) * board->uart_offset; - } - - return setup_port(priv, port, bar, offset, board->reg_shift); -} - -/* - * HP's Remote Management Console. The Diva chip came in several - * different versions. N-class, L2000 and A500 have two Diva chips, each - * with 3 UARTs (the third UART on the second chip is unused). Superdome - * and Keystone have one Diva chip with 3 UARTs. Some later machines have - * one Diva chip, but it has been expanded to 5 UARTs. - */ -static int pci_hp_diva_init(struct pci_dev *dev) -{ - int rc = 0; - - switch (dev->subsystem_device) { - case PCI_DEVICE_ID_HP_DIVA_TOSCA1: - case PCI_DEVICE_ID_HP_DIVA_HALFDOME: - case PCI_DEVICE_ID_HP_DIVA_KEYSTONE: - case PCI_DEVICE_ID_HP_DIVA_EVEREST: - rc = 3; - break; - case PCI_DEVICE_ID_HP_DIVA_TOSCA2: - rc = 2; - break; - case PCI_DEVICE_ID_HP_DIVA_MAESTRO: - rc = 4; - break; - case PCI_DEVICE_ID_HP_DIVA_POWERBAR: - case PCI_DEVICE_ID_HP_DIVA_HURRICANE: - rc = 1; - break; - } - - return rc; -} - -/* - * HP's Diva chip puts the 4th/5th serial port further out, and - * some serial ports are supposed to be hidden on certain models. - */ -static int -pci_hp_diva_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - unsigned int offset = board->first_offset; - unsigned int bar = FL_GET_BASE(board->flags); - - switch (priv->dev->subsystem_device) { - case PCI_DEVICE_ID_HP_DIVA_MAESTRO: - if (idx == 3) - idx++; - break; - case PCI_DEVICE_ID_HP_DIVA_EVEREST: - if (idx > 0) - idx++; - if (idx > 2) - idx++; - break; - } - if (idx > 2) - offset = 0x18; - - offset += idx * board->uart_offset; - - return setup_port(priv, port, bar, offset, board->reg_shift); -} - -/* - * Added for EKF Intel i960 serial boards - */ -static int pci_inteli960ni_init(struct pci_dev *dev) -{ - unsigned long oldval; - - if (!(dev->subsystem_device & 0x1000)) - return -ENODEV; - - /* is firmware started? */ - pci_read_config_dword(dev, 0x44, (void *)&oldval); - if (oldval == 0x00001000L) { /* RESET value */ - printk(KERN_DEBUG "Local i960 firmware missing"); - return -ENODEV; - } - return 0; -} - -/* - * Some PCI serial cards using the PLX 9050 PCI interface chip require - * that the card interrupt be explicitly enabled or disabled. This - * seems to be mainly needed on card using the PLX which also use I/O - * mapped memory. - */ -static int pci_plx9050_init(struct pci_dev *dev) -{ - u8 irq_config; - void __iomem *p; - - if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) { - moan_device("no memory in bar 0", dev); - return 0; - } - - irq_config = 0x41; - if (dev->vendor == PCI_VENDOR_ID_PANACOM || - dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) - irq_config = 0x43; - - if ((dev->vendor == PCI_VENDOR_ID_PLX) && - (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) - /* - * As the megawolf cards have the int pins active - * high, and have 2 UART chips, both ints must be - * enabled on the 9050. Also, the UARTS are set in - * 16450 mode by default, so we have to enable the - * 16C950 'enhanced' mode so that we can use the - * deep FIFOs - */ - irq_config = 0x5b; - /* - * enable/disable interrupts - */ - p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); - if (p == NULL) - return -ENOMEM; - writel(irq_config, p + 0x4c); - - /* - * Read the register back to ensure that it took effect. - */ - readl(p + 0x4c); - iounmap(p); - - return 0; -} - -static void __devexit pci_plx9050_exit(struct pci_dev *dev) -{ - u8 __iomem *p; - - if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) - return; - - /* - * disable interrupts - */ - p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); - if (p != NULL) { - writel(0, p + 0x4c); - - /* - * Read the register back to ensure that it took effect. - */ - readl(p + 0x4c); - iounmap(p); - } -} - -#define NI8420_INT_ENABLE_REG 0x38 -#define NI8420_INT_ENABLE_BIT 0x2000 - -static void __devexit pci_ni8420_exit(struct pci_dev *dev) -{ - void __iomem *p; - unsigned long base, len; - unsigned int bar = 0; - - if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { - moan_device("no memory in bar", dev); - return; - } - - base = pci_resource_start(dev, bar); - len = pci_resource_len(dev, bar); - p = ioremap_nocache(base, len); - if (p == NULL) - return; - - /* Disable the CPU Interrupt */ - writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT), - p + NI8420_INT_ENABLE_REG); - iounmap(p); -} - - -/* MITE registers */ -#define MITE_IOWBSR1 0xc4 -#define MITE_IOWCR1 0xf4 -#define MITE_LCIMR1 0x08 -#define MITE_LCIMR2 0x10 - -#define MITE_LCIMR2_CLR_CPU_IE (1 << 30) - -static void __devexit pci_ni8430_exit(struct pci_dev *dev) -{ - void __iomem *p; - unsigned long base, len; - unsigned int bar = 0; - - if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { - moan_device("no memory in bar", dev); - return; - } - - base = pci_resource_start(dev, bar); - len = pci_resource_len(dev, bar); - p = ioremap_nocache(base, len); - if (p == NULL) - return; - - /* Disable the CPU Interrupt */ - writel(MITE_LCIMR2_CLR_CPU_IE, p + MITE_LCIMR2); - iounmap(p); -} - -/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ -static int -sbs_setup(struct serial_private *priv, const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - unsigned int bar, offset = board->first_offset; - - bar = 0; - - if (idx < 4) { - /* first four channels map to 0, 0x100, 0x200, 0x300 */ - offset += idx * board->uart_offset; - } else if (idx < 8) { - /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */ - offset += idx * board->uart_offset + 0xC00; - } else /* we have only 8 ports on PMC-OCTALPRO */ - return 1; - - return setup_port(priv, port, bar, offset, board->reg_shift); -} - -/* -* This does initialization for PMC OCTALPRO cards: -* maps the device memory, resets the UARTs (needed, bc -* if the module is removed and inserted again, the card -* is in the sleep mode) and enables global interrupt. -*/ - -/* global control register offset for SBS PMC-OctalPro */ -#define OCT_REG_CR_OFF 0x500 - -static int sbs_init(struct pci_dev *dev) -{ - u8 __iomem *p; - - p = pci_ioremap_bar(dev, 0); - - if (p == NULL) - return -ENOMEM; - /* Set bit-4 Control Register (UART RESET) in to reset the uarts */ - writeb(0x10, p + OCT_REG_CR_OFF); - udelay(50); - writeb(0x0, p + OCT_REG_CR_OFF); - - /* Set bit-2 (INTENABLE) of Control Register */ - writeb(0x4, p + OCT_REG_CR_OFF); - iounmap(p); - - return 0; -} - -/* - * Disables the global interrupt of PMC-OctalPro - */ - -static void __devexit sbs_exit(struct pci_dev *dev) -{ - u8 __iomem *p; - - p = pci_ioremap_bar(dev, 0); - /* FIXME: What if resource_len < OCT_REG_CR_OFF */ - if (p != NULL) - writeb(0, p + OCT_REG_CR_OFF); - iounmap(p); -} - -/* - * SIIG serial cards have an PCI interface chip which also controls - * the UART clocking frequency. Each UART can be clocked independently - * (except cards equiped with 4 UARTs) and initial clocking settings - * are stored in the EEPROM chip. It can cause problems because this - * version of serial driver doesn't support differently clocked UART's - * on single PCI card. To prevent this, initialization functions set - * high frequency clocking for all UART's on given card. It is safe (I - * hope) because it doesn't touch EEPROM settings to prevent conflicts - * with other OSes (like M$ DOS). - * - * SIIG support added by Andrey Panin , 10/1999 - * - * There is two family of SIIG serial cards with different PCI - * interface chip and different configuration methods: - * - 10x cards have control registers in IO and/or memory space; - * - 20x cards have control registers in standard PCI configuration space. - * - * Note: all 10x cards have PCI device ids 0x10.. - * all 20x cards have PCI device ids 0x20.. - * - * There are also Quartet Serial cards which use Oxford Semiconductor - * 16954 quad UART PCI chip clocked by 18.432 MHz quartz. - * - * Note: some SIIG cards are probed by the parport_serial object. - */ - -#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc) -#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8) - -static int pci_siig10x_init(struct pci_dev *dev) -{ - u16 data; - void __iomem *p; - - switch (dev->device & 0xfff8) { - case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */ - data = 0xffdf; - break; - case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */ - data = 0xf7ff; - break; - default: /* 1S1P, 4S */ - data = 0xfffb; - break; - } - - p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); - if (p == NULL) - return -ENOMEM; - - writew(readw(p + 0x28) & data, p + 0x28); - readw(p + 0x28); - iounmap(p); - return 0; -} - -#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc) -#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc) - -static int pci_siig20x_init(struct pci_dev *dev) -{ - u8 data; - - /* Change clock frequency for the first UART. */ - pci_read_config_byte(dev, 0x6f, &data); - pci_write_config_byte(dev, 0x6f, data & 0xef); - - /* If this card has 2 UART, we have to do the same with second UART. */ - if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) || - ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) { - pci_read_config_byte(dev, 0x73, &data); - pci_write_config_byte(dev, 0x73, data & 0xef); - } - return 0; -} - -static int pci_siig_init(struct pci_dev *dev) -{ - unsigned int type = dev->device & 0xff00; - - if (type == 0x1000) - return pci_siig10x_init(dev); - else if (type == 0x2000) - return pci_siig20x_init(dev); - - moan_device("Unknown SIIG card", dev); - return -ENODEV; -} - -static int pci_siig_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0; - - if (idx > 3) { - bar = 4; - offset = (idx - 4) * 8; - } - - return setup_port(priv, port, bar, offset, 0); -} - -/* - * Timedia has an explosion of boards, and to avoid the PCI table from - * growing *huge*, we use this function to collapse some 70 entries - * in the PCI table into one, for sanity's and compactness's sake. - */ -static const unsigned short timedia_single_port[] = { - 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 -}; - -static const unsigned short timedia_dual_port[] = { - 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, - 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, - 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, - 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, - 0xD079, 0 -}; - -static const unsigned short timedia_quad_port[] = { - 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, - 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, - 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, - 0xB157, 0 -}; - -static const unsigned short timedia_eight_port[] = { - 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, - 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 -}; - -static const struct timedia_struct { - int num; - const unsigned short *ids; -} timedia_data[] = { - { 1, timedia_single_port }, - { 2, timedia_dual_port }, - { 4, timedia_quad_port }, - { 8, timedia_eight_port } -}; - -static int pci_timedia_init(struct pci_dev *dev) -{ - const unsigned short *ids; - int i, j; - - for (i = 0; i < ARRAY_SIZE(timedia_data); i++) { - ids = timedia_data[i].ids; - for (j = 0; ids[j]; j++) - if (dev->subsystem_device == ids[j]) - return timedia_data[i].num; - } - return 0; -} - -/* - * Timedia/SUNIX uses a mixture of BARs and offsets - * Ugh, this is ugly as all hell --- TYT - */ -static int -pci_timedia_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - unsigned int bar = 0, offset = board->first_offset; - - switch (idx) { - case 0: - bar = 0; - break; - case 1: - offset = board->uart_offset; - bar = 0; - break; - case 2: - bar = 1; - break; - case 3: - offset = board->uart_offset; - /* FALLTHROUGH */ - case 4: /* BAR 2 */ - case 5: /* BAR 3 */ - case 6: /* BAR 4 */ - case 7: /* BAR 5 */ - bar = idx - 2; - } - - return setup_port(priv, port, bar, offset, board->reg_shift); -} - -/* - * Some Titan cards are also a little weird - */ -static int -titan_400l_800l_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - unsigned int bar, offset = board->first_offset; - - switch (idx) { - case 0: - bar = 1; - break; - case 1: - bar = 2; - break; - default: - bar = 4; - offset = (idx - 2) * board->uart_offset; - } - - return setup_port(priv, port, bar, offset, board->reg_shift); -} - -static int pci_xircom_init(struct pci_dev *dev) -{ - msleep(100); - return 0; -} - -static int pci_ni8420_init(struct pci_dev *dev) -{ - void __iomem *p; - unsigned long base, len; - unsigned int bar = 0; - - if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { - moan_device("no memory in bar", dev); - return 0; - } - - base = pci_resource_start(dev, bar); - len = pci_resource_len(dev, bar); - p = ioremap_nocache(base, len); - if (p == NULL) - return -ENOMEM; - - /* Enable CPU Interrupt */ - writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT, - p + NI8420_INT_ENABLE_REG); - - iounmap(p); - return 0; -} - -#define MITE_IOWBSR1_WSIZE 0xa -#define MITE_IOWBSR1_WIN_OFFSET 0x800 -#define MITE_IOWBSR1_WENAB (1 << 7) -#define MITE_LCIMR1_IO_IE_0 (1 << 24) -#define MITE_LCIMR2_SET_CPU_IE (1 << 31) -#define MITE_IOWCR1_RAMSEL_MASK 0xfffffffe - -static int pci_ni8430_init(struct pci_dev *dev) -{ - void __iomem *p; - unsigned long base, len; - u32 device_window; - unsigned int bar = 0; - - if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { - moan_device("no memory in bar", dev); - return 0; - } - - base = pci_resource_start(dev, bar); - len = pci_resource_len(dev, bar); - p = ioremap_nocache(base, len); - if (p == NULL) - return -ENOMEM; - - /* Set device window address and size in BAR0 */ - device_window = ((base + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00) - | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE; - writel(device_window, p + MITE_IOWBSR1); - - /* Set window access to go to RAMSEL IO address space */ - writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK), - p + MITE_IOWCR1); - - /* Enable IO Bus Interrupt 0 */ - writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1); - - /* Enable CPU Interrupt */ - writel(MITE_LCIMR2_SET_CPU_IE, p + MITE_LCIMR2); - - iounmap(p); - return 0; -} - -/* UART Port Control Register */ -#define NI8430_PORTCON 0x0f -#define NI8430_PORTCON_TXVR_ENABLE (1 << 3) - -static int -pci_ni8430_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - void __iomem *p; - unsigned long base, len; - unsigned int bar, offset = board->first_offset; - - if (idx >= board->num_ports) - return 1; - - bar = FL_GET_BASE(board->flags); - offset += idx * board->uart_offset; - - base = pci_resource_start(priv->dev, bar); - len = pci_resource_len(priv->dev, bar); - p = ioremap_nocache(base, len); - - /* enable the transciever */ - writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE, - p + offset + NI8430_PORTCON); - - iounmap(p); - - return setup_port(priv, port, bar, offset, board->reg_shift); -} - - -static int pci_netmos_init(struct pci_dev *dev) -{ - /* subdevice 0x00PS means

parallel, serial */ - unsigned int num_serial = dev->subsystem_device & 0xf; - - if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) || - (dev->device == PCI_DEVICE_ID_NETMOS_9865)) - return 0; - if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && - dev->subsystem_device == 0x0299) - return 0; - - if (num_serial == 0) - return -ENODEV; - return num_serial; -} - -/* - * These chips are available with optionally one parallel port and up to - * two serial ports. Unfortunately they all have the same product id. - * - * Basic configuration is done over a region of 32 I/O ports. The base - * ioport is called INTA or INTC, depending on docs/other drivers. - * - * The region of the 32 I/O ports is configured in POSIO0R... - */ - -/* registers */ -#define ITE_887x_MISCR 0x9c -#define ITE_887x_INTCBAR 0x78 -#define ITE_887x_UARTBAR 0x7c -#define ITE_887x_PS0BAR 0x10 -#define ITE_887x_POSIO0 0x60 - -/* I/O space size */ -#define ITE_887x_IOSIZE 32 -/* I/O space size (bits 26-24; 8 bytes = 011b) */ -#define ITE_887x_POSIO_IOSIZE_8 (3 << 24) -/* I/O space size (bits 26-24; 32 bytes = 101b) */ -#define ITE_887x_POSIO_IOSIZE_32 (5 << 24) -/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */ -#define ITE_887x_POSIO_SPEED (3 << 29) -/* enable IO_Space bit */ -#define ITE_887x_POSIO_ENABLE (1 << 31) - -static int pci_ite887x_init(struct pci_dev *dev) -{ - /* inta_addr are the configuration addresses of the ITE */ - static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0, - 0x200, 0x280, 0 }; - int ret, i, type; - struct resource *iobase = NULL; - u32 miscr, uartbar, ioport; - - /* search for the base-ioport */ - i = 0; - while (inta_addr[i] && iobase == NULL) { - iobase = request_region(inta_addr[i], ITE_887x_IOSIZE, - "ite887x"); - if (iobase != NULL) { - /* write POSIO0R - speed | size | ioport */ - pci_write_config_dword(dev, ITE_887x_POSIO0, - ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | - ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]); - /* write INTCBAR - ioport */ - pci_write_config_dword(dev, ITE_887x_INTCBAR, - inta_addr[i]); - ret = inb(inta_addr[i]); - if (ret != 0xff) { - /* ioport connected */ - break; - } - release_region(iobase->start, ITE_887x_IOSIZE); - iobase = NULL; - } - i++; - } - - if (!inta_addr[i]) { - printk(KERN_ERR "ite887x: could not find iobase\n"); - return -ENODEV; - } - - /* start of undocumented type checking (see parport_pc.c) */ - type = inb(iobase->start + 0x18) & 0x0f; - - switch (type) { - case 0x2: /* ITE8871 (1P) */ - case 0xa: /* ITE8875 (1P) */ - ret = 0; - break; - case 0xe: /* ITE8872 (2S1P) */ - ret = 2; - break; - case 0x6: /* ITE8873 (1S) */ - ret = 1; - break; - case 0x8: /* ITE8874 (2S) */ - ret = 2; - break; - default: - moan_device("Unknown ITE887x", dev); - ret = -ENODEV; - } - - /* configure all serial ports */ - for (i = 0; i < ret; i++) { - /* read the I/O port from the device */ - pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)), - &ioport); - ioport &= 0x0000FF00; /* the actual base address */ - pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)), - ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | - ITE_887x_POSIO_IOSIZE_8 | ioport); - - /* write the ioport to the UARTBAR */ - pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar); - uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */ - uartbar |= (ioport << (16 * i)); /* set the ioport */ - pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar); - - /* get current config */ - pci_read_config_dword(dev, ITE_887x_MISCR, &miscr); - /* disable interrupts (UARTx_Routing[3:0]) */ - miscr &= ~(0xf << (12 - 4 * i)); - /* activate the UART (UARTx_En) */ - miscr |= 1 << (23 - i); - /* write new config with activated UART */ - pci_write_config_dword(dev, ITE_887x_MISCR, miscr); - } - - if (ret <= 0) { - /* the device has no UARTs if we get here */ - release_region(iobase->start, ITE_887x_IOSIZE); - } - - return ret; -} - -static void __devexit pci_ite887x_exit(struct pci_dev *dev) -{ - u32 ioport; - /* the ioport is bit 0-15 in POSIO0R */ - pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport); - ioport &= 0xffff; - release_region(ioport, ITE_887x_IOSIZE); -} - -/* - * Oxford Semiconductor Inc. - * Check that device is part of the Tornado range of devices, then determine - * the number of ports available on the device. - */ -static int pci_oxsemi_tornado_init(struct pci_dev *dev) -{ - u8 __iomem *p; - unsigned long deviceID; - unsigned int number_uarts = 0; - - /* OxSemi Tornado devices are all 0xCxxx */ - if (dev->vendor == PCI_VENDOR_ID_OXSEMI && - (dev->device & 0xF000) != 0xC000) - return 0; - - p = pci_iomap(dev, 0, 5); - if (p == NULL) - return -ENOMEM; - - deviceID = ioread32(p); - /* Tornado device */ - if (deviceID == 0x07000200) { - number_uarts = ioread8(p + 4); - printk(KERN_DEBUG - "%d ports detected on Oxford PCI Express device\n", - number_uarts); - } - pci_iounmap(dev, p); - return number_uarts; -} - -static int -pci_default_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - unsigned int bar, offset = board->first_offset, maxnr; - - bar = FL_GET_BASE(board->flags); - if (board->flags & FL_BASE_BARS) - bar += idx; - else - offset += idx * board->uart_offset; - - maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> - (board->reg_shift + 3); - - if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) - return 1; - - return setup_port(priv, port, bar, offset, board->reg_shift); -} - -static int -ce4100_serial_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - int ret; - - ret = setup_port(priv, port, 0, 0, board->reg_shift); - port->iotype = UPIO_MEM32; - port->type = PORT_XSCALE; - port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); - port->regshift = 2; - - return ret; -} - -static int skip_tx_en_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - port->flags |= UPF_NO_TXEN_TEST; - printk(KERN_DEBUG "serial8250: skipping TxEn test for device " - "[%04x:%04x] subsystem [%04x:%04x]\n", - priv->dev->vendor, - priv->dev->device, - priv->dev->subsystem_vendor, - priv->dev->subsystem_device); - - return pci_default_setup(priv, board, port, idx); -} - -/* This should be in linux/pci_ids.h */ -#define PCI_VENDOR_ID_SBSMODULARIO 0x124B -#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B -#define PCI_DEVICE_ID_OCTPRO 0x0001 -#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108 -#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 -#define PCI_SUBDEVICE_ID_POCTAL232 0x0308 -#define PCI_SUBDEVICE_ID_POCTAL422 0x0408 -#define PCI_VENDOR_ID_ADVANTECH 0x13fe -#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66 -#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 -#define PCI_DEVICE_ID_TITAN_200I 0x8028 -#define PCI_DEVICE_ID_TITAN_400I 0x8048 -#define PCI_DEVICE_ID_TITAN_800I 0x8088 -#define PCI_DEVICE_ID_TITAN_800EH 0xA007 -#define PCI_DEVICE_ID_TITAN_800EHB 0xA008 -#define PCI_DEVICE_ID_TITAN_400EH 0xA009 -#define PCI_DEVICE_ID_TITAN_100E 0xA010 -#define PCI_DEVICE_ID_TITAN_200E 0xA012 -#define PCI_DEVICE_ID_TITAN_400E 0xA013 -#define PCI_DEVICE_ID_TITAN_800E 0xA014 -#define PCI_DEVICE_ID_TITAN_200EI 0xA016 -#define PCI_DEVICE_ID_TITAN_200EISI 0xA017 -#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 - -/* Unknown vendors/cards - this should not be in linux/pci_ids.h */ -#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 - -/* - * Master list of serial port init/setup/exit quirks. - * This does not describe the general nature of the port. - * (ie, baud base, number and location of ports, etc) - * - * This list is ordered alphabetically by vendor then device. - * Specific entries must come before more generic entries. - */ -static struct pci_serial_quirk pci_serial_quirks[] __refdata = { - /* - * ADDI-DATA GmbH communication cards - */ - { - .vendor = PCI_VENDOR_ID_ADDIDATA_OLD, - .device = PCI_DEVICE_ID_ADDIDATA_APCI7800, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = addidata_apci7800_setup, - }, - /* - * AFAVLAB cards - these may be called via parport_serial - * It is not clear whether this applies to all products. - */ - { - .vendor = PCI_VENDOR_ID_AFAVLAB, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = afavlab_setup, - }, - /* - * HP Diva - */ - { - .vendor = PCI_VENDOR_ID_HP, - .device = PCI_DEVICE_ID_HP_DIVA, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_hp_diva_init, - .setup = pci_hp_diva_setup, - }, - /* - * Intel - */ - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_80960_RP, - .subvendor = 0xe4bf, - .subdevice = PCI_ANY_ID, - .init = pci_inteli960ni_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_8257X_SOL, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = skip_tx_en_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82573L_SOL, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = skip_tx_en_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82573E_SOL, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = skip_tx_en_setup, - }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_CE4100_UART, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = ce4100_serial_setup, - }, - /* - * ITE - */ - { - .vendor = PCI_VENDOR_ID_ITE, - .device = PCI_DEVICE_ID_ITE_8872, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ite887x_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ite887x_exit), - }, - /* - * National Instruments - */ - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PCI23216, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PCI2328, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PCI2324, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PCI2322, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PCI2324I, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PCI2322I, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PXI8420_23216, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PXI8420_2328, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PXI8420_2324, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PXI8420_2322, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PXI8422_2324, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_DEVICE_ID_NI_PXI8422_2322, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8420_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_ni8420_exit), - }, - { - .vendor = PCI_VENDOR_ID_NI, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_ni8430_init, - .setup = pci_ni8430_setup, - .exit = __devexit_p(pci_ni8430_exit), - }, - /* - * Panacom - */ - { - .vendor = PCI_VENDOR_ID_PANACOM, - .device = PCI_DEVICE_ID_PANACOM_QUADMODEM, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_plx9050_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), - }, - { - .vendor = PCI_VENDOR_ID_PANACOM, - .device = PCI_DEVICE_ID_PANACOM_DUALMODEM, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_plx9050_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), - }, - /* - * PLX - */ - { - .vendor = PCI_VENDOR_ID_PLX, - .device = PCI_DEVICE_ID_PLX_9030, - .subvendor = PCI_SUBVENDOR_ID_PERLE, - .subdevice = PCI_ANY_ID, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_PLX, - .device = PCI_DEVICE_ID_PLX_9050, - .subvendor = PCI_SUBVENDOR_ID_EXSYS, - .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, - .init = pci_plx9050_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), - }, - { - .vendor = PCI_VENDOR_ID_PLX, - .device = PCI_DEVICE_ID_PLX_9050, - .subvendor = PCI_SUBVENDOR_ID_KEYSPAN, - .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, - .init = pci_plx9050_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), - }, - { - .vendor = PCI_VENDOR_ID_PLX, - .device = PCI_DEVICE_ID_PLX_9050, - .subvendor = PCI_VENDOR_ID_PLX, - .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584, - .init = pci_plx9050_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), - }, - { - .vendor = PCI_VENDOR_ID_PLX, - .device = PCI_DEVICE_ID_PLX_ROMULUS, - .subvendor = PCI_VENDOR_ID_PLX, - .subdevice = PCI_DEVICE_ID_PLX_ROMULUS, - .init = pci_plx9050_init, - .setup = pci_default_setup, - .exit = __devexit_p(pci_plx9050_exit), - }, - /* - * SBS Technologies, Inc., PMC-OCTALPRO 232 - */ - { - .vendor = PCI_VENDOR_ID_SBSMODULARIO, - .device = PCI_DEVICE_ID_OCTPRO, - .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, - .subdevice = PCI_SUBDEVICE_ID_OCTPRO232, - .init = sbs_init, - .setup = sbs_setup, - .exit = __devexit_p(sbs_exit), - }, - /* - * SBS Technologies, Inc., PMC-OCTALPRO 422 - */ - { - .vendor = PCI_VENDOR_ID_SBSMODULARIO, - .device = PCI_DEVICE_ID_OCTPRO, - .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, - .subdevice = PCI_SUBDEVICE_ID_OCTPRO422, - .init = sbs_init, - .setup = sbs_setup, - .exit = __devexit_p(sbs_exit), - }, - /* - * SBS Technologies, Inc., P-Octal 232 - */ - { - .vendor = PCI_VENDOR_ID_SBSMODULARIO, - .device = PCI_DEVICE_ID_OCTPRO, - .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, - .subdevice = PCI_SUBDEVICE_ID_POCTAL232, - .init = sbs_init, - .setup = sbs_setup, - .exit = __devexit_p(sbs_exit), - }, - /* - * SBS Technologies, Inc., P-Octal 422 - */ - { - .vendor = PCI_VENDOR_ID_SBSMODULARIO, - .device = PCI_DEVICE_ID_OCTPRO, - .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, - .subdevice = PCI_SUBDEVICE_ID_POCTAL422, - .init = sbs_init, - .setup = sbs_setup, - .exit = __devexit_p(sbs_exit), - }, - /* - * SIIG cards - these may be called via parport_serial - */ - { - .vendor = PCI_VENDOR_ID_SIIG, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_siig_init, - .setup = pci_siig_setup, - }, - /* - * Titan cards - */ - { - .vendor = PCI_VENDOR_ID_TITAN, - .device = PCI_DEVICE_ID_TITAN_400L, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = titan_400l_800l_setup, - }, - { - .vendor = PCI_VENDOR_ID_TITAN, - .device = PCI_DEVICE_ID_TITAN_800L, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = titan_400l_800l_setup, - }, - /* - * Timedia cards - */ - { - .vendor = PCI_VENDOR_ID_TIMEDIA, - .device = PCI_DEVICE_ID_TIMEDIA_1889, - .subvendor = PCI_VENDOR_ID_TIMEDIA, - .subdevice = PCI_ANY_ID, - .init = pci_timedia_init, - .setup = pci_timedia_setup, - }, - { - .vendor = PCI_VENDOR_ID_TIMEDIA, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = pci_timedia_setup, - }, - /* - * Xircom cards - */ - { - .vendor = PCI_VENDOR_ID_XIRCOM, - .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_xircom_init, - .setup = pci_default_setup, - }, - /* - * Netmos cards - these may be called via parport_serial - */ - { - .vendor = PCI_VENDOR_ID_NETMOS, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_netmos_init, - .setup = pci_default_setup, - }, - /* - * For Oxford Semiconductor and Mainpine - */ - { - .vendor = PCI_VENDOR_ID_OXSEMI, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_oxsemi_tornado_init, - .setup = pci_default_setup, - }, - { - .vendor = PCI_VENDOR_ID_MAINPINE, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .init = pci_oxsemi_tornado_init, - .setup = pci_default_setup, - }, - /* - * Default "match everything" terminator entry - */ - { - .vendor = PCI_ANY_ID, - .device = PCI_ANY_ID, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = pci_default_setup, - } -}; - -static inline int quirk_id_matches(u32 quirk_id, u32 dev_id) -{ - return quirk_id == PCI_ANY_ID || quirk_id == dev_id; -} - -static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) -{ - struct pci_serial_quirk *quirk; - - for (quirk = pci_serial_quirks; ; quirk++) - if (quirk_id_matches(quirk->vendor, dev->vendor) && - quirk_id_matches(quirk->device, dev->device) && - quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && - quirk_id_matches(quirk->subdevice, dev->subsystem_device)) - break; - return quirk; -} - -static inline int get_pci_irq(struct pci_dev *dev, - const struct pciserial_board *board) -{ - if (board->flags & FL_NOIRQ) - return 0; - else - return dev->irq; -} - -/* - * This is the configuration table for all of the PCI serial boards - * which we support. It is directly indexed by the pci_board_num_t enum - * value, which is encoded in the pci_device_id PCI probe table's - * driver_data member. - * - * The makeup of these names are: - * pbn_bn{_bt}_n_baud{_offsetinhex} - * - * bn = PCI BAR number - * bt = Index using PCI BARs - * n = number of serial ports - * baud = baud rate - * offsetinhex = offset for each sequential port (in hex) - * - * This table is sorted by (in order): bn, bt, baud, offsetindex, n. - * - * Please note: in theory if n = 1, _bt infix should make no difference. - * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200 - */ -enum pci_board_num_t { - pbn_default = 0, - - pbn_b0_1_115200, - pbn_b0_2_115200, - pbn_b0_4_115200, - pbn_b0_5_115200, - pbn_b0_8_115200, - - pbn_b0_1_921600, - pbn_b0_2_921600, - pbn_b0_4_921600, - - pbn_b0_2_1130000, - - pbn_b0_4_1152000, - - pbn_b0_2_1843200, - pbn_b0_4_1843200, - - pbn_b0_2_1843200_200, - pbn_b0_4_1843200_200, - pbn_b0_8_1843200_200, - - pbn_b0_1_4000000, - - pbn_b0_bt_1_115200, - pbn_b0_bt_2_115200, - pbn_b0_bt_4_115200, - pbn_b0_bt_8_115200, - - pbn_b0_bt_1_460800, - pbn_b0_bt_2_460800, - pbn_b0_bt_4_460800, - - pbn_b0_bt_1_921600, - pbn_b0_bt_2_921600, - pbn_b0_bt_4_921600, - pbn_b0_bt_8_921600, - - pbn_b1_1_115200, - pbn_b1_2_115200, - pbn_b1_4_115200, - pbn_b1_8_115200, - pbn_b1_16_115200, - - pbn_b1_1_921600, - pbn_b1_2_921600, - pbn_b1_4_921600, - pbn_b1_8_921600, - - pbn_b1_2_1250000, - - pbn_b1_bt_1_115200, - pbn_b1_bt_2_115200, - pbn_b1_bt_4_115200, - - pbn_b1_bt_2_921600, - - pbn_b1_1_1382400, - pbn_b1_2_1382400, - pbn_b1_4_1382400, - pbn_b1_8_1382400, - - pbn_b2_1_115200, - pbn_b2_2_115200, - pbn_b2_4_115200, - pbn_b2_8_115200, - - pbn_b2_1_460800, - pbn_b2_4_460800, - pbn_b2_8_460800, - pbn_b2_16_460800, - - pbn_b2_1_921600, - pbn_b2_4_921600, - pbn_b2_8_921600, - - pbn_b2_8_1152000, - - pbn_b2_bt_1_115200, - pbn_b2_bt_2_115200, - pbn_b2_bt_4_115200, - - pbn_b2_bt_2_921600, - pbn_b2_bt_4_921600, - - pbn_b3_2_115200, - pbn_b3_4_115200, - pbn_b3_8_115200, - - pbn_b4_bt_2_921600, - pbn_b4_bt_4_921600, - pbn_b4_bt_8_921600, - - /* - * Board-specific versions. - */ - pbn_panacom, - pbn_panacom2, - pbn_panacom4, - pbn_exsys_4055, - pbn_plx_romulus, - pbn_oxsemi, - pbn_oxsemi_1_4000000, - pbn_oxsemi_2_4000000, - pbn_oxsemi_4_4000000, - pbn_oxsemi_8_4000000, - pbn_intel_i960, - pbn_sgi_ioc3, - pbn_computone_4, - pbn_computone_6, - pbn_computone_8, - pbn_sbsxrsio, - pbn_exar_XR17C152, - pbn_exar_XR17C154, - pbn_exar_XR17C158, - pbn_exar_ibm_saturn, - pbn_pasemi_1682M, - pbn_ni8430_2, - pbn_ni8430_4, - pbn_ni8430_8, - pbn_ni8430_16, - pbn_ADDIDATA_PCIe_1_3906250, - pbn_ADDIDATA_PCIe_2_3906250, - pbn_ADDIDATA_PCIe_4_3906250, - pbn_ADDIDATA_PCIe_8_3906250, - pbn_ce4100_1_115200, -}; - -/* - * uart_offset - the space between channels - * reg_shift - describes how the UART registers are mapped - * to PCI memory by the card. - * For example IER register on SBS, Inc. PMC-OctPro is located at - * offset 0x10 from the UART base, while UART_IER is defined as 1 - * in include/linux/serial_reg.h, - * see first lines of serial_in() and serial_out() in 8250.c -*/ - -static struct pciserial_board pci_boards[] __devinitdata = { - [pbn_default] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_1_115200] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_2_115200] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_4_115200] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_5_115200] = { - .flags = FL_BASE0, - .num_ports = 5, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_8_115200] = { - .flags = FL_BASE0, - .num_ports = 8, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_1_921600] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b0_2_921600] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b0_4_921600] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 8, - }, - - [pbn_b0_2_1130000] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 1130000, - .uart_offset = 8, - }, - - [pbn_b0_4_1152000] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 1152000, - .uart_offset = 8, - }, - - [pbn_b0_2_1843200] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 1843200, - .uart_offset = 8, - }, - [pbn_b0_4_1843200] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 1843200, - .uart_offset = 8, - }, - - [pbn_b0_2_1843200_200] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 1843200, - .uart_offset = 0x200, - }, - [pbn_b0_4_1843200_200] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 1843200, - .uart_offset = 0x200, - }, - [pbn_b0_8_1843200_200] = { - .flags = FL_BASE0, - .num_ports = 8, - .base_baud = 1843200, - .uart_offset = 0x200, - }, - [pbn_b0_1_4000000] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 4000000, - .uart_offset = 8, - }, - - [pbn_b0_bt_1_115200] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 1, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_bt_2_115200] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 2, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_bt_4_115200] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b0_bt_8_115200] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 8, - .base_baud = 115200, - .uart_offset = 8, - }, - - [pbn_b0_bt_1_460800] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 1, - .base_baud = 460800, - .uart_offset = 8, - }, - [pbn_b0_bt_2_460800] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 2, - .base_baud = 460800, - .uart_offset = 8, - }, - [pbn_b0_bt_4_460800] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 4, - .base_baud = 460800, - .uart_offset = 8, - }, - - [pbn_b0_bt_1_921600] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 1, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b0_bt_2_921600] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b0_bt_4_921600] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b0_bt_8_921600] = { - .flags = FL_BASE0|FL_BASE_BARS, - .num_ports = 8, - .base_baud = 921600, - .uart_offset = 8, - }, - - [pbn_b1_1_115200] = { - .flags = FL_BASE1, - .num_ports = 1, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b1_2_115200] = { - .flags = FL_BASE1, - .num_ports = 2, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b1_4_115200] = { - .flags = FL_BASE1, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b1_8_115200] = { - .flags = FL_BASE1, - .num_ports = 8, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b1_16_115200] = { - .flags = FL_BASE1, - .num_ports = 16, - .base_baud = 115200, - .uart_offset = 8, - }, - - [pbn_b1_1_921600] = { - .flags = FL_BASE1, - .num_ports = 1, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b1_2_921600] = { - .flags = FL_BASE1, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b1_4_921600] = { - .flags = FL_BASE1, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b1_8_921600] = { - .flags = FL_BASE1, - .num_ports = 8, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b1_2_1250000] = { - .flags = FL_BASE1, - .num_ports = 2, - .base_baud = 1250000, - .uart_offset = 8, - }, - - [pbn_b1_bt_1_115200] = { - .flags = FL_BASE1|FL_BASE_BARS, - .num_ports = 1, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b1_bt_2_115200] = { - .flags = FL_BASE1|FL_BASE_BARS, - .num_ports = 2, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b1_bt_4_115200] = { - .flags = FL_BASE1|FL_BASE_BARS, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - - [pbn_b1_bt_2_921600] = { - .flags = FL_BASE1|FL_BASE_BARS, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 8, - }, - - [pbn_b1_1_1382400] = { - .flags = FL_BASE1, - .num_ports = 1, - .base_baud = 1382400, - .uart_offset = 8, - }, - [pbn_b1_2_1382400] = { - .flags = FL_BASE1, - .num_ports = 2, - .base_baud = 1382400, - .uart_offset = 8, - }, - [pbn_b1_4_1382400] = { - .flags = FL_BASE1, - .num_ports = 4, - .base_baud = 1382400, - .uart_offset = 8, - }, - [pbn_b1_8_1382400] = { - .flags = FL_BASE1, - .num_ports = 8, - .base_baud = 1382400, - .uart_offset = 8, - }, - - [pbn_b2_1_115200] = { - .flags = FL_BASE2, - .num_ports = 1, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b2_2_115200] = { - .flags = FL_BASE2, - .num_ports = 2, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b2_4_115200] = { - .flags = FL_BASE2, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b2_8_115200] = { - .flags = FL_BASE2, - .num_ports = 8, - .base_baud = 115200, - .uart_offset = 8, - }, - - [pbn_b2_1_460800] = { - .flags = FL_BASE2, - .num_ports = 1, - .base_baud = 460800, - .uart_offset = 8, - }, - [pbn_b2_4_460800] = { - .flags = FL_BASE2, - .num_ports = 4, - .base_baud = 460800, - .uart_offset = 8, - }, - [pbn_b2_8_460800] = { - .flags = FL_BASE2, - .num_ports = 8, - .base_baud = 460800, - .uart_offset = 8, - }, - [pbn_b2_16_460800] = { - .flags = FL_BASE2, - .num_ports = 16, - .base_baud = 460800, - .uart_offset = 8, - }, - - [pbn_b2_1_921600] = { - .flags = FL_BASE2, - .num_ports = 1, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b2_4_921600] = { - .flags = FL_BASE2, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b2_8_921600] = { - .flags = FL_BASE2, - .num_ports = 8, - .base_baud = 921600, - .uart_offset = 8, - }, - - [pbn_b2_8_1152000] = { - .flags = FL_BASE2, - .num_ports = 8, - .base_baud = 1152000, - .uart_offset = 8, - }, - - [pbn_b2_bt_1_115200] = { - .flags = FL_BASE2|FL_BASE_BARS, - .num_ports = 1, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b2_bt_2_115200] = { - .flags = FL_BASE2|FL_BASE_BARS, - .num_ports = 2, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b2_bt_4_115200] = { - .flags = FL_BASE2|FL_BASE_BARS, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - - [pbn_b2_bt_2_921600] = { - .flags = FL_BASE2|FL_BASE_BARS, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b2_bt_4_921600] = { - .flags = FL_BASE2|FL_BASE_BARS, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 8, - }, - - [pbn_b3_2_115200] = { - .flags = FL_BASE3, - .num_ports = 2, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b3_4_115200] = { - .flags = FL_BASE3, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_b3_8_115200] = { - .flags = FL_BASE3, - .num_ports = 8, - .base_baud = 115200, - .uart_offset = 8, - }, - - [pbn_b4_bt_2_921600] = { - .flags = FL_BASE4, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b4_bt_4_921600] = { - .flags = FL_BASE4, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 8, - }, - [pbn_b4_bt_8_921600] = { - .flags = FL_BASE4, - .num_ports = 8, - .base_baud = 921600, - .uart_offset = 8, - }, - - /* - * Entries following this are board-specific. - */ - - /* - * Panacom - IOMEM - */ - [pbn_panacom] = { - .flags = FL_BASE2, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 0x400, - .reg_shift = 7, - }, - [pbn_panacom2] = { - .flags = FL_BASE2|FL_BASE_BARS, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 0x400, - .reg_shift = 7, - }, - [pbn_panacom4] = { - .flags = FL_BASE2|FL_BASE_BARS, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 0x400, - .reg_shift = 7, - }, - - [pbn_exsys_4055] = { - .flags = FL_BASE2, - .num_ports = 4, - .base_baud = 115200, - .uart_offset = 8, - }, - - /* I think this entry is broken - the first_offset looks wrong --rmk */ - [pbn_plx_romulus] = { - .flags = FL_BASE2, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 8 << 2, - .reg_shift = 2, - .first_offset = 0x03, - }, - - /* - * This board uses the size of PCI Base region 0 to - * signal now many ports are available - */ - [pbn_oxsemi] = { - .flags = FL_BASE0|FL_REGION_SZ_CAP, - .num_ports = 32, - .base_baud = 115200, - .uart_offset = 8, - }, - [pbn_oxsemi_1_4000000] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 4000000, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - [pbn_oxsemi_2_4000000] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 4000000, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - [pbn_oxsemi_4_4000000] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 4000000, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - [pbn_oxsemi_8_4000000] = { - .flags = FL_BASE0, - .num_ports = 8, - .base_baud = 4000000, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - - - /* - * EKF addition for i960 Boards form EKF with serial port. - * Max 256 ports. - */ - [pbn_intel_i960] = { - .flags = FL_BASE0, - .num_ports = 32, - .base_baud = 921600, - .uart_offset = 8 << 2, - .reg_shift = 2, - .first_offset = 0x10000, - }, - [pbn_sgi_ioc3] = { - .flags = FL_BASE0|FL_NOIRQ, - .num_ports = 1, - .base_baud = 458333, - .uart_offset = 8, - .reg_shift = 0, - .first_offset = 0x20178, - }, - - /* - * Computone - uses IOMEM. - */ - [pbn_computone_4] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 0x40, - .reg_shift = 2, - .first_offset = 0x200, - }, - [pbn_computone_6] = { - .flags = FL_BASE0, - .num_ports = 6, - .base_baud = 921600, - .uart_offset = 0x40, - .reg_shift = 2, - .first_offset = 0x200, - }, - [pbn_computone_8] = { - .flags = FL_BASE0, - .num_ports = 8, - .base_baud = 921600, - .uart_offset = 0x40, - .reg_shift = 2, - .first_offset = 0x200, - }, - [pbn_sbsxrsio] = { - .flags = FL_BASE0, - .num_ports = 8, - .base_baud = 460800, - .uart_offset = 256, - .reg_shift = 4, - }, - /* - * Exar Corp. XR17C15[248] Dual/Quad/Octal UART - * Only basic 16550A support. - * XR17C15[24] are not tested, but they should work. - */ - [pbn_exar_XR17C152] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 921600, - .uart_offset = 0x200, - }, - [pbn_exar_XR17C154] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 921600, - .uart_offset = 0x200, - }, - [pbn_exar_XR17C158] = { - .flags = FL_BASE0, - .num_ports = 8, - .base_baud = 921600, - .uart_offset = 0x200, - }, - [pbn_exar_ibm_saturn] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 921600, - .uart_offset = 0x200, - }, - - /* - * PA Semi PWRficient PA6T-1682M on-chip UART - */ - [pbn_pasemi_1682M] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 8333333, - }, - /* - * National Instruments 843x - */ - [pbn_ni8430_16] = { - .flags = FL_BASE0, - .num_ports = 16, - .base_baud = 3686400, - .uart_offset = 0x10, - .first_offset = 0x800, - }, - [pbn_ni8430_8] = { - .flags = FL_BASE0, - .num_ports = 8, - .base_baud = 3686400, - .uart_offset = 0x10, - .first_offset = 0x800, - }, - [pbn_ni8430_4] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 3686400, - .uart_offset = 0x10, - .first_offset = 0x800, - }, - [pbn_ni8430_2] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 3686400, - .uart_offset = 0x10, - .first_offset = 0x800, - }, - /* - * ADDI-DATA GmbH PCI-Express communication cards - */ - [pbn_ADDIDATA_PCIe_1_3906250] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 3906250, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - [pbn_ADDIDATA_PCIe_2_3906250] = { - .flags = FL_BASE0, - .num_ports = 2, - .base_baud = 3906250, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - [pbn_ADDIDATA_PCIe_4_3906250] = { - .flags = FL_BASE0, - .num_ports = 4, - .base_baud = 3906250, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - [pbn_ADDIDATA_PCIe_8_3906250] = { - .flags = FL_BASE0, - .num_ports = 8, - .base_baud = 3906250, - .uart_offset = 0x200, - .first_offset = 0x1000, - }, - [pbn_ce4100_1_115200] = { - .flags = FL_BASE0, - .num_ports = 1, - .base_baud = 921600, - .reg_shift = 2, - }, -}; - -static const struct pci_device_id softmodem_blacklist[] = { - { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */ - { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */ - { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */ -}; - -/* - * Given a complete unknown PCI device, try to use some heuristics to - * guess what the configuration might be, based on the pitiful PCI - * serial specs. Returns 0 on success, 1 on failure. - */ -static int __devinit -serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) -{ - const struct pci_device_id *blacklist; - int num_iomem, num_port, first_port = -1, i; - - /* - * If it is not a communications device or the programming - * interface is greater than 6, give up. - * - * (Should we try to make guesses for multiport serial devices - * later?) - */ - if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && - ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || - (dev->class & 0xff) > 6) - return -ENODEV; - - /* - * Do not access blacklisted devices that are known not to - * feature serial ports. - */ - for (blacklist = softmodem_blacklist; - blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist); - blacklist++) { - if (dev->vendor == blacklist->vendor && - dev->device == blacklist->device) - return -ENODEV; - } - - num_iomem = num_port = 0; - for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { - if (pci_resource_flags(dev, i) & IORESOURCE_IO) { - num_port++; - if (first_port == -1) - first_port = i; - } - if (pci_resource_flags(dev, i) & IORESOURCE_MEM) - num_iomem++; - } - - /* - * If there is 1 or 0 iomem regions, and exactly one port, - * use it. We guess the number of ports based on the IO - * region size. - */ - if (num_iomem <= 1 && num_port == 1) { - board->flags = first_port; - board->num_ports = pci_resource_len(dev, first_port) / 8; - return 0; - } - - /* - * Now guess if we've got a board which indexes by BARs. - * Each IO BAR should be 8 bytes, and they should follow - * consecutively. - */ - first_port = -1; - num_port = 0; - for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { - if (pci_resource_flags(dev, i) & IORESOURCE_IO && - pci_resource_len(dev, i) == 8 && - (first_port == -1 || (first_port + num_port) == i)) { - num_port++; - if (first_port == -1) - first_port = i; - } - } - - if (num_port > 1) { - board->flags = first_port | FL_BASE_BARS; - board->num_ports = num_port; - return 0; - } - - return -ENODEV; -} - -static inline int -serial_pci_matches(const struct pciserial_board *board, - const struct pciserial_board *guessed) -{ - return - board->num_ports == guessed->num_ports && - board->base_baud == guessed->base_baud && - board->uart_offset == guessed->uart_offset && - board->reg_shift == guessed->reg_shift && - board->first_offset == guessed->first_offset; -} - -struct serial_private * -pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) -{ - struct uart_port serial_port; - struct serial_private *priv; - struct pci_serial_quirk *quirk; - int rc, nr_ports, i; - - nr_ports = board->num_ports; - - /* - * Find an init and setup quirks. - */ - quirk = find_quirk(dev); - - /* - * Run the new-style initialization function. - * The initialization function returns: - * <0 - error - * 0 - use board->num_ports - * >0 - number of ports - */ - if (quirk->init) { - rc = quirk->init(dev); - if (rc < 0) { - priv = ERR_PTR(rc); - goto err_out; - } - if (rc) - nr_ports = rc; - } - - priv = kzalloc(sizeof(struct serial_private) + - sizeof(unsigned int) * nr_ports, - GFP_KERNEL); - if (!priv) { - priv = ERR_PTR(-ENOMEM); - goto err_deinit; - } - - priv->dev = dev; - priv->quirk = quirk; - - memset(&serial_port, 0, sizeof(struct uart_port)); - serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; - serial_port.uartclk = board->base_baud * 16; - serial_port.irq = get_pci_irq(dev, board); - serial_port.dev = &dev->dev; - - for (i = 0; i < nr_ports; i++) { - if (quirk->setup(priv, board, &serial_port, i)) - break; - -#ifdef SERIAL_DEBUG_PCI - printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n", - serial_port.iobase, serial_port.irq, serial_port.iotype); -#endif - - priv->line[i] = serial8250_register_port(&serial_port); - if (priv->line[i] < 0) { - printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]); - break; - } - } - priv->nr = i; - return priv; - -err_deinit: - if (quirk->exit) - quirk->exit(dev); -err_out: - return priv; -} -EXPORT_SYMBOL_GPL(pciserial_init_ports); - -void pciserial_remove_ports(struct serial_private *priv) -{ - struct pci_serial_quirk *quirk; - int i; - - for (i = 0; i < priv->nr; i++) - serial8250_unregister_port(priv->line[i]); - - for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { - if (priv->remapped_bar[i]) - iounmap(priv->remapped_bar[i]); - priv->remapped_bar[i] = NULL; - } - - /* - * Find the exit quirks. - */ - quirk = find_quirk(priv->dev); - if (quirk->exit) - quirk->exit(priv->dev); - - kfree(priv); -} -EXPORT_SYMBOL_GPL(pciserial_remove_ports); - -void pciserial_suspend_ports(struct serial_private *priv) -{ - int i; - - for (i = 0; i < priv->nr; i++) - if (priv->line[i] >= 0) - serial8250_suspend_port(priv->line[i]); -} -EXPORT_SYMBOL_GPL(pciserial_suspend_ports); - -void pciserial_resume_ports(struct serial_private *priv) -{ - int i; - - /* - * Ensure that the board is correctly configured. - */ - if (priv->quirk->init) - priv->quirk->init(priv->dev); - - for (i = 0; i < priv->nr; i++) - if (priv->line[i] >= 0) - serial8250_resume_port(priv->line[i]); -} -EXPORT_SYMBOL_GPL(pciserial_resume_ports); - -/* - * Probe one serial board. Unfortunately, there is no rhyme nor reason - * to the arrangement of serial ports on a PCI card. - */ -static int __devinit -pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) -{ - struct serial_private *priv; - const struct pciserial_board *board; - struct pciserial_board tmp; - int rc; - - if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { - printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n", - ent->driver_data); - return -EINVAL; - } - - board = &pci_boards[ent->driver_data]; - - rc = pci_enable_device(dev); - if (rc) - return rc; - - if (ent->driver_data == pbn_default) { - /* - * Use a copy of the pci_board entry for this; - * avoid changing entries in the table. - */ - memcpy(&tmp, board, sizeof(struct pciserial_board)); - board = &tmp; - - /* - * We matched one of our class entries. Try to - * determine the parameters of this board. - */ - rc = serial_pci_guess_board(dev, &tmp); - if (rc) - goto disable; - } else { - /* - * We matched an explicit entry. If we are able to - * detect this boards settings with our heuristic, - * then we no longer need this entry. - */ - memcpy(&tmp, &pci_boards[pbn_default], - sizeof(struct pciserial_board)); - rc = serial_pci_guess_board(dev, &tmp); - if (rc == 0 && serial_pci_matches(board, &tmp)) - moan_device("Redundant entry in serial pci_table.", - dev); - } - - priv = pciserial_init_ports(dev, board); - if (!IS_ERR(priv)) { - pci_set_drvdata(dev, priv); - return 0; - } - - rc = PTR_ERR(priv); - - disable: - pci_disable_device(dev); - return rc; -} - -static void __devexit pciserial_remove_one(struct pci_dev *dev) -{ - struct serial_private *priv = pci_get_drvdata(dev); - - pci_set_drvdata(dev, NULL); - - pciserial_remove_ports(priv); - - pci_disable_device(dev); -} - -#ifdef CONFIG_PM -static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state) -{ - struct serial_private *priv = pci_get_drvdata(dev); - - if (priv) - pciserial_suspend_ports(priv); - - pci_save_state(dev); - pci_set_power_state(dev, pci_choose_state(dev, state)); - return 0; -} - -static int pciserial_resume_one(struct pci_dev *dev) -{ - int err; - struct serial_private *priv = pci_get_drvdata(dev); - - pci_set_power_state(dev, PCI_D0); - pci_restore_state(dev); - - if (priv) { - /* - * The device may have been disabled. Re-enable it. - */ - err = pci_enable_device(dev); - /* FIXME: We cannot simply error out here */ - if (err) - printk(KERN_ERR "pciserial: Unable to re-enable ports, trying to continue.\n"); - pciserial_resume_ports(priv); - } - return 0; -} -#endif - -static struct pci_device_id serial_pci_tbl[] = { - /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ - { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, - PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, - pbn_b2_8_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, - pbn_b1_8_1382400 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, - pbn_b1_4_1382400 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, - pbn_b1_2_1382400 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, - pbn_b1_8_1382400 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, - pbn_b1_4_1382400 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, - pbn_b1_2_1382400 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0, - pbn_b1_8_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0, - pbn_b1_8_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0, - pbn_b1_4_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0, - pbn_b1_4_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0, - pbn_b1_2_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0, - pbn_b1_8_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0, - pbn_b1_8_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0, - pbn_b1_4_921600 }, - { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0, - pbn_b1_2_1250000 }, - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0, - pbn_b0_2_1843200 }, - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0, - pbn_b0_4_1843200 }, - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, - PCI_VENDOR_ID_AFAVLAB, - PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0, - pbn_b0_4_1152000 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0, - pbn_b0_2_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232, 0, 0, - pbn_b0_4_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232, 0, 0, - pbn_b0_8_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1, 0, 0, - pbn_b0_2_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2, 0, 0, - pbn_b0_4_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4, 0, 0, - pbn_b0_8_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2, 0, 0, - pbn_b0_2_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4, 0, 0, - pbn_b0_4_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8, 0, 0, - pbn_b0_8_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485, 0, 0, - pbn_b0_2_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485, 0, 0, - pbn_b0_4_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, - PCI_SUBVENDOR_ID_CONNECT_TECH, - PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0, - pbn_b0_8_1843200_200 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, - PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT, - 0, 0, pbn_exar_ibm_saturn }, - - { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_1_115200 }, - { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_2_115200 }, - { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_4_115200 }, - { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_2_115200 }, - { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_4_115200 }, - { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_8_115200 }, - { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_8_460800 }, - { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_8_115200 }, - - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_2_115200 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_2_921600 }, - /* - * VScom SPCOM800, from sl@s.pl - */ - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_8_921600 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_4_921600 }, - /* Unknown card - subdevice 0x1584 */ - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_VENDOR_ID_PLX, - PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0, - pbn_b0_4_115200 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_KEYSPAN, - PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, - pbn_panacom }, - { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_panacom4 }, - { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_panacom2 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, - PCI_VENDOR_ID_ESDGMBH, - PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0, - pbn_b2_4_115200 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_CHASE_PCIFAST, - PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, - pbn_b2_4_460800 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_CHASE_PCIFAST, - PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, - pbn_b2_8_460800 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_CHASE_PCIFAST, - PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, - pbn_b2_16_460800 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_CHASE_PCIFAST, - PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, - pbn_b2_16_460800 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_CHASE_PCIRAS, - PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, - pbn_b2_4_460800 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_CHASE_PCIRAS, - PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, - pbn_b2_8_460800 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, - PCI_SUBVENDOR_ID_EXSYS, - PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0, - pbn_exsys_4055 }, - /* - * Megawolf Romulus PCI Serial Card, from Mike Hudson - * (Exoray@isys.ca) - */ - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS, - 0x10b5, 0x106a, 0, 0, - pbn_plx_romulus }, - { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_4_115200 }, - { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_2_115200 }, - { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_8_115200 }, - { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_8_115200 }, - { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, - PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, - 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, - PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, - 0, 0, - pbn_b0_4_1152000 }, - { PCI_VENDOR_ID_OXSEMI, 0x9505, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_921600 }, - - /* - * The below card is a little controversial since it is the - * subject of a PCI vendor/device ID clash. (See - * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). - * For now just used the hex ID 0x950a. - */ - { PCI_VENDOR_ID_OXSEMI, 0x950a, - PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL, 0, 0, - pbn_b0_2_115200 }, - { PCI_VENDOR_ID_OXSEMI, 0x950a, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_2_1130000 }, - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950, - PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0, - pbn_b0_1_921600 }, - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_4_115200 }, - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_921600 }, - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958, - PCI_ANY_ID , PCI_ANY_ID, 0, 0, - pbn_b2_8_1152000 }, - - /* - * Oxford Semiconductor Inc. Tornado PCI express device range. - */ - { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_4_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_4_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_8_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_8_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */ - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - /* - * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado - */ - { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */ - PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */ - PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0, - pbn_oxsemi_2_4000000 }, - { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */ - PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0, - pbn_oxsemi_4_4000000 }, - { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */ - PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0, - pbn_oxsemi_8_4000000 }, - /* - * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, - * from skokodyn@yahoo.com - */ - { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, - PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0, - pbn_sbsxrsio }, - { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, - PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0, - pbn_sbsxrsio }, - { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, - PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0, - pbn_sbsxrsio }, - { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, - PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0, - pbn_sbsxrsio }, - - /* - * Digitan DS560-558, from jimd@esoft.com - */ - { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_1_115200 }, - - /* - * Titan Electronic cards - * The 400L and 800L have a custom setup quirk. - */ - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_2_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_1_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_2_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_4_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_8_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b4_bt_2_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b4_bt_4_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b4_bt_8_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_1_4000000 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_4000000 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_4_4000000 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_8_4000000 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_4000000 }, - { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi_2_4000000 }, - - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_1_460800 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_1_460800 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_1_460800 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_2_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_2_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_2_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_4_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_4_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_4_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_4_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_4_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_4_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_8_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_8_921600 }, - { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_8_921600 }, - - /* - * Computone devices submitted by Doug McNash dmcnash@computone.com - */ - { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, - PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4, - 0, 0, pbn_computone_4 }, - { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, - PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8, - 0, 0, pbn_computone_8 }, - { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, - PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6, - 0, 0, pbn_computone_6 }, - - { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_oxsemi }, - { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889, - PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, - pbn_b0_bt_1_921600 }, - - /* - * AFAVLAB serial card, from Harald Welte - */ - { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_8_115200 }, - { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_8_115200 }, - - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_4_460800 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_4_460800 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_460800 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_460800 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_460800 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_1_115200 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_1_460800 }, - - /* - * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408). - * Cards are identified by their subsystem vendor IDs, which - * (in hex) match the model number. - * - * Note that JC140x are RS422/485 cards which require ox950 - * ACR = 0x10, and as such are not currently fully supported. - */ - { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, - 0x1204, 0x0004, 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, - 0x1208, 0x0004, 0, 0, - pbn_b0_4_921600 }, -/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, - 0x1402, 0x0002, 0, 0, - pbn_b0_2_921600 }, */ -/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, - 0x1404, 0x0004, 0, 0, - pbn_b0_4_921600 }, */ - { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1, - 0x1208, 0x0004, 0, 0, - pbn_b0_4_921600 }, - - { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, - 0x1204, 0x0004, 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, - 0x1208, 0x0004, 0, 0, - pbn_b0_4_921600 }, - { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3, - 0x1208, 0x0004, 0, 0, - pbn_b0_4_921600 }, - /* - * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com - */ - { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_1_1382400 }, - - /* - * Dell Remote Access Card III - Tim_T_Murphy@Dell.com - */ - { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_1_1382400 }, - - /* - * RAStel 2 port modem, gerg@moreton.com.au - */ - { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_bt_2_115200 }, - - /* - * EKF addition for i960 Boards form EKF with serial port - */ - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP, - 0xE4BF, PCI_ANY_ID, 0, 0, - pbn_intel_i960 }, - - /* - * Xircom Cardbus/Ethernet combos - */ - { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_115200 }, - /* - * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry) - */ - { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_115200 }, - - /* - * Untested PCI modems, sent in from various folks... - */ - - /* - * Elsa Model 56K PCI Modem, from Andreas Rath - */ - { PCI_VENDOR_ID_ROCKWELL, 0x1004, - 0x1048, 0x1500, 0, 0, - pbn_b1_1_115200 }, - - { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, - 0xFF00, 0, 0, 0, - pbn_sgi_ioc3 }, - - /* - * HP Diva card - */ - { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, - PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0, - pbn_b1_1_115200 }, - { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_5_115200 }, - { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b2_1_115200 }, - - { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b3_2_115200 }, - { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b3_4_115200 }, - { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b3_8_115200 }, - - /* - * Exar Corp. XR17C15[248] Dual/Quad/Octal UART - */ - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, - PCI_ANY_ID, PCI_ANY_ID, - 0, - 0, pbn_exar_XR17C152 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, - PCI_ANY_ID, PCI_ANY_ID, - 0, - 0, pbn_exar_XR17C154 }, - { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, - PCI_ANY_ID, PCI_ANY_ID, - 0, - 0, pbn_exar_XR17C158 }, - - /* - * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) - */ - { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_1_115200 }, - /* - * ITE - */ - { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872, - PCI_ANY_ID, PCI_ANY_ID, - 0, 0, - pbn_b1_bt_1_115200 }, - - /* - * IntaShield IS-200 - */ - { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */ - pbn_b2_2_115200 }, - /* - * IntaShield IS-400 - */ - { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ - pbn_b2_4_115200 }, - /* - * Perle PCI-RAS cards - */ - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, - PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4, - 0, 0, pbn_b2_4_921600 }, - { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, - PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8, - 0, 0, pbn_b2_8_921600 }, - - /* - * Mainpine series cards: Fairly standard layout but fools - * parts of the autodetect in some cases and uses otherwise - * unmatched communications subclasses in the PCI Express case - */ - - { /* RockForceDUO */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0200, - 0, 0, pbn_b0_2_115200 }, - { /* RockForceQUATRO */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0300, - 0, 0, pbn_b0_4_115200 }, - { /* RockForceDUO+ */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0400, - 0, 0, pbn_b0_2_115200 }, - { /* RockForceQUATRO+ */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0500, - 0, 0, pbn_b0_4_115200 }, - { /* RockForce+ */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0600, - 0, 0, pbn_b0_2_115200 }, - { /* RockForce+ */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0700, - 0, 0, pbn_b0_4_115200 }, - { /* RockForceOCTO+ */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0800, - 0, 0, pbn_b0_8_115200 }, - { /* RockForceDUO+ */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0C00, - 0, 0, pbn_b0_2_115200 }, - { /* RockForceQUARTRO+ */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x0D00, - 0, 0, pbn_b0_4_115200 }, - { /* RockForceOCTO+ */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x1D00, - 0, 0, pbn_b0_8_115200 }, - { /* RockForceD1 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x2000, - 0, 0, pbn_b0_1_115200 }, - { /* RockForceF1 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x2100, - 0, 0, pbn_b0_1_115200 }, - { /* RockForceD2 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x2200, - 0, 0, pbn_b0_2_115200 }, - { /* RockForceF2 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x2300, - 0, 0, pbn_b0_2_115200 }, - { /* RockForceD4 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x2400, - 0, 0, pbn_b0_4_115200 }, - { /* RockForceF4 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x2500, - 0, 0, pbn_b0_4_115200 }, - { /* RockForceD8 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x2600, - 0, 0, pbn_b0_8_115200 }, - { /* RockForceF8 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x2700, - 0, 0, pbn_b0_8_115200 }, - { /* IQ Express D1 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x3000, - 0, 0, pbn_b0_1_115200 }, - { /* IQ Express F1 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x3100, - 0, 0, pbn_b0_1_115200 }, - { /* IQ Express D2 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x3200, - 0, 0, pbn_b0_2_115200 }, - { /* IQ Express F2 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x3300, - 0, 0, pbn_b0_2_115200 }, - { /* IQ Express D4 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x3400, - 0, 0, pbn_b0_4_115200 }, - { /* IQ Express F4 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x3500, - 0, 0, pbn_b0_4_115200 }, - { /* IQ Express D8 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x3C00, - 0, 0, pbn_b0_8_115200 }, - { /* IQ Express F8 */ - PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, - PCI_VENDOR_ID_MAINPINE, 0x3D00, - 0, 0, pbn_b0_8_115200 }, - - - /* - * PA Semi PA6T-1682M on-chip UART - */ - { PCI_VENDOR_ID_PASEMI, 0xa004, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_pasemi_1682M }, - - /* - * National Instruments - */ - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_16_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_8_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_4_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_2_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_4_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_2_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_16_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_8_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_4_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_2_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_4_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b1_bt_2_115200 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_2 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_2 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_4 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_4 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_8 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_8 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_16 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_16 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_2 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_2 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_4 }, - { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ni8430_4 }, - - /* - * ADDI-DATA GmbH communication cards - */ - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7500, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_4_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7420, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_2_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7300, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_1_115200 }, - - { PCI_VENDOR_ID_ADDIDATA_OLD, - PCI_DEVICE_ID_ADDIDATA_APCI7800, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b1_8_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7500_2, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_4_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7420_2, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_2_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7300_2, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_1_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7500_3, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_4_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7420_3, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_2_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7300_3, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_1_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCI7800_3, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_b0_8_115200 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCIe7500, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_ADDIDATA_PCIe_4_3906250 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCIe7420, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_ADDIDATA_PCIe_2_3906250 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCIe7300, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_ADDIDATA_PCIe_1_3906250 }, - - { PCI_VENDOR_ID_ADDIDATA, - PCI_DEVICE_ID_ADDIDATA_APCIe7800, - PCI_ANY_ID, - PCI_ANY_ID, - 0, - 0, - pbn_ADDIDATA_PCIe_8_3906250 }, - - { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, - PCI_VENDOR_ID_IBM, 0x0299, - 0, 0, pbn_b0_bt_2_115200 }, - - { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, - 0xA000, 0x1000, - 0, 0, pbn_b0_1_115200 }, - - /* - * Best Connectivity PCI Multi I/O cards - */ - - { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, - 0xA000, 0x1000, - 0, 0, pbn_b0_1_115200 }, - - { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, - 0xA000, 0x3004, - 0, 0, pbn_b0_bt_4_115200 }, - /* Intel CE4100 */ - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_ce4100_1_115200 }, - - - /* - * These entries match devices with class COMMUNICATION_SERIAL, - * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL - */ - { PCI_ANY_ID, PCI_ANY_ID, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_COMMUNICATION_SERIAL << 8, - 0xffff00, pbn_default }, - { PCI_ANY_ID, PCI_ANY_ID, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_COMMUNICATION_MODEM << 8, - 0xffff00, pbn_default }, - { PCI_ANY_ID, PCI_ANY_ID, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, - 0xffff00, pbn_default }, - { 0, } -}; - -static struct pci_driver serial_pci_driver = { - .name = "serial", - .probe = pciserial_init_one, - .remove = __devexit_p(pciserial_remove_one), -#ifdef CONFIG_PM - .suspend = pciserial_suspend_one, - .resume = pciserial_resume_one, -#endif - .id_table = serial_pci_tbl, -}; - -static int __init serial8250_pci_init(void) -{ - return pci_register_driver(&serial_pci_driver); -} - -static void __exit serial8250_pci_exit(void) -{ - pci_unregister_driver(&serial_pci_driver); -} - -module_init(serial8250_pci_init); -module_exit(serial8250_pci_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module"); -MODULE_DEVICE_TABLE(pci, serial_pci_tbl); diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c deleted file mode 100644 index 4822cb50cd0f..000000000000 --- a/drivers/serial/8250_pnp.c +++ /dev/null @@ -1,523 +0,0 @@ -/* - * linux/drivers/char/8250_pnp.c - * - * Probe module for 8250/16550-type ISAPNP serial ports. - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright (C) 2001 Russell King, All Rights Reserved. - * - * Ported to the Linux PnP Layer - (C) Adam Belay. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "8250.h" - -#define UNKNOWN_DEV 0x3000 - - -static const struct pnp_device_id pnp_dev_table[] = { - /* Archtek America Corp. */ - /* Archtek SmartLink Modem 3334BT Plug & Play */ - { "AAC000F", 0 }, - /* Anchor Datacomm BV */ - /* SXPro 144 External Data Fax Modem Plug & Play */ - { "ADC0001", 0 }, - /* SXPro 288 External Data Fax Modem Plug & Play */ - { "ADC0002", 0 }, - /* PROLiNK 1456VH ISA PnP K56flex Fax Modem */ - { "AEI0250", 0 }, - /* Actiontec ISA PNP 56K X2 Fax Modem */ - { "AEI1240", 0 }, - /* Rockwell 56K ACF II Fax+Data+Voice Modem */ - { "AKY1021", 0 /*SPCI_FL_NO_SHIRQ*/ }, - /* AZT3005 PnP SOUND DEVICE */ - { "AZT4001", 0 }, - /* Best Data Products Inc. Smart One 336F PnP Modem */ - { "BDP3336", 0 }, - /* Boca Research */ - /* Boca Complete Ofc Communicator 14.4 Data-FAX */ - { "BRI0A49", 0 }, - /* Boca Research 33,600 ACF Modem */ - { "BRI1400", 0 }, - /* Boca 33.6 Kbps Internal FD34FSVD */ - { "BRI3400", 0 }, - /* Boca 33.6 Kbps Internal FD34FSVD */ - { "BRI0A49", 0 }, - /* Best Data Products Inc. Smart One 336F PnP Modem */ - { "BDP3336", 0 }, - /* Computer Peripherals Inc */ - /* EuroViVa CommCenter-33.6 SP PnP */ - { "CPI4050", 0 }, - /* Creative Labs */ - /* Creative Labs Phone Blaster 28.8 DSVD PnP Voice */ - { "CTL3001", 0 }, - /* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */ - { "CTL3011", 0 }, - /* Davicom ISA 33.6K Modem */ - { "DAV0336", 0 }, - /* Creative */ - /* Creative Modem Blaster Flash56 DI5601-1 */ - { "DMB1032", 0 }, - /* Creative Modem Blaster V.90 DI5660 */ - { "DMB2001", 0 }, - /* E-Tech */ - /* E-Tech CyberBULLET PC56RVP */ - { "ETT0002", 0 }, - /* FUJITSU */ - /* Fujitsu 33600 PnP-I2 R Plug & Play */ - { "FUJ0202", 0 }, - /* Fujitsu FMV-FX431 Plug & Play */ - { "FUJ0205", 0 }, - /* Fujitsu 33600 PnP-I4 R Plug & Play */ - { "FUJ0206", 0 }, - /* Fujitsu Fax Voice 33600 PNP-I5 R Plug & Play */ - { "FUJ0209", 0 }, - /* Archtek America Corp. */ - /* Archtek SmartLink Modem 3334BT Plug & Play */ - { "GVC000F", 0 }, - /* Archtek SmartLink Modem 3334BRV 33.6K Data Fax Voice */ - { "GVC0303", 0 }, - /* Hayes */ - /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */ - { "HAY0001", 0 }, - /* Hayes Optima 336 V.34 + FAX + Voice PnP */ - { "HAY000C", 0 }, - /* Hayes Optima 336B V.34 + FAX + Voice PnP */ - { "HAY000D", 0 }, - /* Hayes Accura 56K Ext Fax Modem PnP */ - { "HAY5670", 0 }, - /* Hayes Accura 56K Ext Fax Modem PnP */ - { "HAY5674", 0 }, - /* Hayes Accura 56K Fax Modem PnP */ - { "HAY5675", 0 }, - /* Hayes 288, V.34 + FAX */ - { "HAYF000", 0 }, - /* Hayes Optima 288 V.34 + FAX + Voice, Plug & Play */ - { "HAYF001", 0 }, - /* IBM */ - /* IBM Thinkpad 701 Internal Modem Voice */ - { "IBM0033", 0 }, - /* Intertex */ - /* Intertex 28k8 33k6 Voice EXT PnP */ - { "IXDC801", 0 }, - /* Intertex 33k6 56k Voice EXT PnP */ - { "IXDC901", 0 }, - /* Intertex 28k8 33k6 Voice SP EXT PnP */ - { "IXDD801", 0 }, - /* Intertex 33k6 56k Voice SP EXT PnP */ - { "IXDD901", 0 }, - /* Intertex 28k8 33k6 Voice SP INT PnP */ - { "IXDF401", 0 }, - /* Intertex 28k8 33k6 Voice SP EXT PnP */ - { "IXDF801", 0 }, - /* Intertex 33k6 56k Voice SP EXT PnP */ - { "IXDF901", 0 }, - /* Kortex International */ - /* KORTEX 28800 Externe PnP */ - { "KOR4522", 0 }, - /* KXPro 33.6 Vocal ASVD PnP */ - { "KORF661", 0 }, - /* Lasat */ - /* LASAT Internet 33600 PnP */ - { "LAS4040", 0 }, - /* Lasat Safire 560 PnP */ - { "LAS4540", 0 }, - /* Lasat Safire 336 PnP */ - { "LAS5440", 0 }, - /* Microcom, Inc. */ - /* Microcom TravelPorte FAST V.34 Plug & Play */ - { "MNP0281", 0 }, - /* Microcom DeskPorte V.34 FAST or FAST+ Plug & Play */ - { "MNP0336", 0 }, - /* Microcom DeskPorte FAST EP 28.8 Plug & Play */ - { "MNP0339", 0 }, - /* Microcom DeskPorte 28.8P Plug & Play */ - { "MNP0342", 0 }, - /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ - { "MNP0500", 0 }, - /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ - { "MNP0501", 0 }, - /* Microcom DeskPorte 28.8S Internal Plug & Play */ - { "MNP0502", 0 }, - /* Motorola */ - /* Motorola BitSURFR Plug & Play */ - { "MOT1105", 0 }, - /* Motorola TA210 Plug & Play */ - { "MOT1111", 0 }, - /* Motorola HMTA 200 (ISDN) Plug & Play */ - { "MOT1114", 0 }, - /* Motorola BitSURFR Plug & Play */ - { "MOT1115", 0 }, - /* Motorola Lifestyle 28.8 Internal */ - { "MOT1190", 0 }, - /* Motorola V.3400 Plug & Play */ - { "MOT1501", 0 }, - /* Motorola Lifestyle 28.8 V.34 Plug & Play */ - { "MOT1502", 0 }, - /* Motorola Power 28.8 V.34 Plug & Play */ - { "MOT1505", 0 }, - /* Motorola ModemSURFR External 28.8 Plug & Play */ - { "MOT1509", 0 }, - /* Motorola Premier 33.6 Desktop Plug & Play */ - { "MOT150A", 0 }, - /* Motorola VoiceSURFR 56K External PnP */ - { "MOT150F", 0 }, - /* Motorola ModemSURFR 56K External PnP */ - { "MOT1510", 0 }, - /* Motorola ModemSURFR 56K Internal PnP */ - { "MOT1550", 0 }, - /* Motorola ModemSURFR Internal 28.8 Plug & Play */ - { "MOT1560", 0 }, - /* Motorola Premier 33.6 Internal Plug & Play */ - { "MOT1580", 0 }, - /* Motorola OnlineSURFR 28.8 Internal Plug & Play */ - { "MOT15B0", 0 }, - /* Motorola VoiceSURFR 56K Internal PnP */ - { "MOT15F0", 0 }, - /* Com 1 */ - /* Deskline K56 Phone System PnP */ - { "MVX00A1", 0 }, - /* PC Rider K56 Phone System PnP */ - { "MVX00F2", 0 }, - /* NEC 98NOTE SPEAKER PHONE FAX MODEM(33600bps) */ - { "nEC8241", 0 }, - /* Pace 56 Voice Internal Plug & Play Modem */ - { "PMC2430", 0 }, - /* Generic */ - /* Generic standard PC COM port */ - { "PNP0500", 0 }, - /* Generic 16550A-compatible COM port */ - { "PNP0501", 0 }, - /* Compaq 14400 Modem */ - { "PNPC000", 0 }, - /* Compaq 2400/9600 Modem */ - { "PNPC001", 0 }, - /* Dial-Up Networking Serial Cable between 2 PCs */ - { "PNPC031", 0 }, - /* Dial-Up Networking Parallel Cable between 2 PCs */ - { "PNPC032", 0 }, - /* Standard 9600 bps Modem */ - { "PNPC100", 0 }, - /* Standard 14400 bps Modem */ - { "PNPC101", 0 }, - /* Standard 28800 bps Modem*/ - { "PNPC102", 0 }, - /* Standard Modem*/ - { "PNPC103", 0 }, - /* Standard 9600 bps Modem*/ - { "PNPC104", 0 }, - /* Standard 14400 bps Modem*/ - { "PNPC105", 0 }, - /* Standard 28800 bps Modem*/ - { "PNPC106", 0 }, - /* Standard Modem */ - { "PNPC107", 0 }, - /* Standard 9600 bps Modem */ - { "PNPC108", 0 }, - /* Standard 14400 bps Modem */ - { "PNPC109", 0 }, - /* Standard 28800 bps Modem */ - { "PNPC10A", 0 }, - /* Standard Modem */ - { "PNPC10B", 0 }, - /* Standard 9600 bps Modem */ - { "PNPC10C", 0 }, - /* Standard 14400 bps Modem */ - { "PNPC10D", 0 }, - /* Standard 28800 bps Modem */ - { "PNPC10E", 0 }, - /* Standard Modem */ - { "PNPC10F", 0 }, - /* Standard PCMCIA Card Modem */ - { "PNP2000", 0 }, - /* Rockwell */ - /* Modular Technology */ - /* Rockwell 33.6 DPF Internal PnP */ - /* Modular Technology 33.6 Internal PnP */ - { "ROK0030", 0 }, - /* Kortex International */ - /* KORTEX 14400 Externe PnP */ - { "ROK0100", 0 }, - /* Rockwell 28.8 */ - { "ROK4120", 0 }, - /* Viking Components, Inc */ - /* Viking 28.8 INTERNAL Fax+Data+Voice PnP */ - { "ROK4920", 0 }, - /* Rockwell */ - /* British Telecom */ - /* Modular Technology */ - /* Rockwell 33.6 DPF External PnP */ - /* BT Prologue 33.6 External PnP */ - /* Modular Technology 33.6 External PnP */ - { "RSS00A0", 0 }, - /* Viking 56K FAX INT */ - { "RSS0262", 0 }, - /* K56 par,VV,Voice,Speakphone,AudioSpan,PnP */ - { "RSS0250", 0 }, - /* SupraExpress 28.8 Data/Fax PnP modem */ - { "SUP1310", 0 }, - /* SupraExpress 336i PnP Voice Modem */ - { "SUP1381", 0 }, - /* SupraExpress 33.6 Data/Fax PnP modem */ - { "SUP1421", 0 }, - /* SupraExpress 33.6 Data/Fax PnP modem */ - { "SUP1590", 0 }, - /* SupraExpress 336i Sp ASVD */ - { "SUP1620", 0 }, - /* SupraExpress 33.6 Data/Fax PnP modem */ - { "SUP1760", 0 }, - /* SupraExpress 56i Sp Intl */ - { "SUP2171", 0 }, - /* Phoebe Micro */ - /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */ - { "TEX0011", 0 }, - /* Archtek America Corp. */ - /* Archtek SmartLink Modem 3334BT Plug & Play */ - { "UAC000F", 0 }, - /* 3Com Corp. */ - /* Gateway Telepath IIvi 33.6 */ - { "USR0000", 0 }, - /* U.S. Robotics Sporster 33.6K Fax INT PnP */ - { "USR0002", 0 }, - /* Sportster Vi 14.4 PnP FAX Voicemail */ - { "USR0004", 0 }, - /* U.S. Robotics 33.6K Voice INT PnP */ - { "USR0006", 0 }, - /* U.S. Robotics 33.6K Voice EXT PnP */ - { "USR0007", 0 }, - /* U.S. Robotics Courier V.Everything INT PnP */ - { "USR0009", 0 }, - /* U.S. Robotics 33.6K Voice INT PnP */ - { "USR2002", 0 }, - /* U.S. Robotics 56K Voice INT PnP */ - { "USR2070", 0 }, - /* U.S. Robotics 56K Voice EXT PnP */ - { "USR2080", 0 }, - /* U.S. Robotics 56K FAX INT */ - { "USR3031", 0 }, - /* U.S. Robotics 56K FAX INT */ - { "USR3050", 0 }, - /* U.S. Robotics 56K Voice INT PnP */ - { "USR3070", 0 }, - /* U.S. Robotics 56K Voice EXT PnP */ - { "USR3080", 0 }, - /* U.S. Robotics 56K Voice INT PnP */ - { "USR3090", 0 }, - /* U.S. Robotics 56K Message */ - { "USR9100", 0 }, - /* U.S. Robotics 56K FAX EXT PnP*/ - { "USR9160", 0 }, - /* U.S. Robotics 56K FAX INT PnP*/ - { "USR9170", 0 }, - /* U.S. Robotics 56K Voice EXT PnP*/ - { "USR9180", 0 }, - /* U.S. Robotics 56K Voice INT PnP*/ - { "USR9190", 0 }, - /* Wacom tablets */ - { "WACFXXX", 0 }, - /* Compaq touchscreen */ - { "FPI2002", 0 }, - /* Fujitsu Stylistic touchscreens */ - { "FUJ02B2", 0 }, - { "FUJ02B3", 0 }, - /* Fujitsu Stylistic LT touchscreens */ - { "FUJ02B4", 0 }, - /* Passive Fujitsu Stylistic touchscreens */ - { "FUJ02B6", 0 }, - { "FUJ02B7", 0 }, - { "FUJ02B8", 0 }, - { "FUJ02B9", 0 }, - { "FUJ02BC", 0 }, - /* Fujitsu Wacom Tablet PC device */ - { "FUJ02E5", 0 }, - /* Fujitsu P-series tablet PC device */ - { "FUJ02E6", 0 }, - /* Fujitsu Wacom 2FGT Tablet PC device */ - { "FUJ02E7", 0 }, - /* Fujitsu Wacom 1FGT Tablet PC device */ - { "FUJ02E9", 0 }, - /* - * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in - * disguise) - */ - { "LTS0001", 0 }, - /* Rockwell's (PORALiNK) 33600 INT PNP */ - { "WCI0003", 0 }, - /* Unknown PnP modems */ - { "PNPCXXX", UNKNOWN_DEV }, - /* More unknown PnP modems */ - { "PNPDXXX", UNKNOWN_DEV }, - { "", 0 } -}; - -MODULE_DEVICE_TABLE(pnp, pnp_dev_table); - -static char *modem_names[] __devinitdata = { - "MODEM", "Modem", "modem", "FAX", "Fax", "fax", - "56K", "56k", "K56", "33.6", "28.8", "14.4", - "33,600", "28,800", "14,400", "33.600", "28.800", "14.400", - "33600", "28800", "14400", "V.90", "V.34", "V.32", NULL -}; - -static int __devinit check_name(char *name) -{ - char **tmp; - - for (tmp = modem_names; *tmp; tmp++) - if (strstr(name, *tmp)) - return 1; - - return 0; -} - -static int __devinit check_resources(struct pnp_dev *dev) -{ - resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8}; - int i; - - for (i = 0; i < ARRAY_SIZE(base); i++) { - if (pnp_possible_config(dev, IORESOURCE_IO, base[i], 8)) - return 1; - } - - return 0; -} - -/* - * Given a complete unknown PnP device, try to use some heuristics to - * detect modems. Currently use such heuristic set: - * - dev->name or dev->bus->name must contain "modem" substring; - * - device must have only one IO region (8 byte long) with base address - * 0x2e8, 0x3e8, 0x2f8 or 0x3f8. - * - * Such detection looks very ugly, but can detect at least some of numerous - * PnP modems, alternatively we must hardcode all modems in pnp_devices[] - * table. - */ -static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags) -{ - if (!(check_name(pnp_dev_name(dev)) || - (dev->card && check_name(dev->card->name)))) - return -ENODEV; - - if (check_resources(dev)) - return 0; - - return -ENODEV; -} - -static int __devinit -serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) -{ - struct uart_port port; - int ret, line, flags = dev_id->driver_data; - - if (flags & UNKNOWN_DEV) { - ret = serial_pnp_guess_board(dev, &flags); - if (ret < 0) - return ret; - } - - memset(&port, 0, sizeof(struct uart_port)); - if (pnp_irq_valid(dev, 0)) - port.irq = pnp_irq(dev, 0); - if (pnp_port_valid(dev, 0)) { - port.iobase = pnp_port_start(dev, 0); - port.iotype = UPIO_PORT; - } else if (pnp_mem_valid(dev, 0)) { - port.mapbase = pnp_mem_start(dev, 0); - port.iotype = UPIO_MEM; - port.flags = UPF_IOREMAP; - } else - return -ENODEV; - -#ifdef SERIAL_DEBUG_PNP - printk(KERN_DEBUG - "Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n", - port.iobase, port.mapbase, port.irq, port.iotype); -#endif - - port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; - if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE) - port.flags |= UPF_SHARE_IRQ; - port.uartclk = 1843200; - port.dev = &dev->dev; - - line = serial8250_register_port(&port); - if (line < 0) - return -ENODEV; - - pnp_set_drvdata(dev, (void *)((long)line + 1)); - return 0; -} - -static void __devexit serial_pnp_remove(struct pnp_dev *dev) -{ - long line = (long)pnp_get_drvdata(dev); - if (line) - serial8250_unregister_port(line - 1); -} - -#ifdef CONFIG_PM -static int serial_pnp_suspend(struct pnp_dev *dev, pm_message_t state) -{ - long line = (long)pnp_get_drvdata(dev); - - if (!line) - return -ENODEV; - serial8250_suspend_port(line - 1); - return 0; -} - -static int serial_pnp_resume(struct pnp_dev *dev) -{ - long line = (long)pnp_get_drvdata(dev); - - if (!line) - return -ENODEV; - serial8250_resume_port(line - 1); - return 0; -} -#else -#define serial_pnp_suspend NULL -#define serial_pnp_resume NULL -#endif /* CONFIG_PM */ - -static struct pnp_driver serial_pnp_driver = { - .name = "serial", - .probe = serial_pnp_probe, - .remove = __devexit_p(serial_pnp_remove), - .suspend = serial_pnp_suspend, - .resume = serial_pnp_resume, - .id_table = pnp_dev_table, -}; - -static int __init serial8250_pnp_init(void) -{ - return pnp_register_driver(&serial_pnp_driver); -} - -static void __exit serial8250_pnp_exit(void) -{ - pnp_unregister_driver(&serial_pnp_driver); -} - -module_init(serial8250_pnp_init); -module_exit(serial8250_pnp_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Generic 8250/16x50 PnP serial driver"); diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig deleted file mode 100644 index c1df7676a73d..000000000000 --- a/drivers/serial/Kconfig +++ /dev/null @@ -1,1598 +0,0 @@ -# -# Serial device configuration -# - -menu "Serial drivers" - depends on HAS_IOMEM - -# -# The new 8250/16550 serial drivers -config SERIAL_8250 - tristate "8250/16550 and compatible serial support" - select SERIAL_CORE - ---help--- - This selects whether you want to include the driver for the standard - serial ports. The standard answer is Y. People who might say N - here are those that are setting up dedicated Ethernet WWW/FTP - servers, or users that have one of the various bus mice instead of a - serial mouse and don't intend to use their machine's standard serial - port for anything. (Note that the Cyclades and Stallion multi - serial port drivers do not need this driver built in for them to - work.) - - To compile this driver as a module, choose M here: the - module will be called 8250. - [WARNING: Do not compile this driver as a module if you are using - non-standard serial ports, since the configuration information will - be lost when the driver is unloaded. This limitation may be lifted - in the future.] - - BTW1: If you have a mouseman serial mouse which is not recognized by - the X window system, try running gpm first. - - BTW2: If you intend to use a software modem (also called Winmodem) - under Linux, forget it. These modems are crippled and require - proprietary drivers which are only available under Windows. - - Most people will say Y or M here, so that they can use serial mice, - modems and similar devices connecting to the standard serial ports. - -config SERIAL_8250_CONSOLE - bool "Console on 8250/16550 and compatible serial port" - depends on SERIAL_8250=y - select SERIAL_CORE_CONSOLE - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all - kernel messages and warnings and which allows logins in single user - mode). This could be useful if some terminal or printer is connected - to that serial port. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyS1". (Try "man bootparam" or see the documentation of - your boot loader (grub or lilo or loadlin) about how to pass options - to the kernel at boot time.) - - If you don't have a VGA card installed and you say Y here, the - kernel will automatically use the first serial line, /dev/ttyS0, as - system console. - - You can set that using a kernel command line option such as - "console=uart8250,io,0x3f8,9600n8" - "console=uart8250,mmio,0xff5e0000,115200n8". - and it will switch to normal serial console when the corresponding - port is ready. - "earlycon=uart8250,io,0x3f8,9600n8" - "earlycon=uart8250,mmio,0xff5e0000,115200n8". - it will not only setup early console. - - If unsure, say N. - -config FIX_EARLYCON_MEM - bool - depends on X86 - default y - -config SERIAL_8250_GSC - tristate - depends on SERIAL_8250 && GSC - default SERIAL_8250 - -config SERIAL_8250_PCI - tristate "8250/16550 PCI device support" if EMBEDDED - depends on SERIAL_8250 && PCI - default SERIAL_8250 - help - This builds standard PCI serial support. You may be able to - disable this feature if you only need legacy serial support. - Saves about 9K. - -config SERIAL_8250_PNP - tristate "8250/16550 PNP device support" if EMBEDDED - depends on SERIAL_8250 && PNP - default SERIAL_8250 - help - This builds standard PNP serial support. You may be able to - disable this feature if you only need legacy serial support. - -config SERIAL_8250_HP300 - tristate - depends on SERIAL_8250 && HP300 - default SERIAL_8250 - -config SERIAL_8250_CS - tristate "8250/16550 PCMCIA device support" - depends on PCMCIA && SERIAL_8250 - ---help--- - Say Y here to enable support for 16-bit PCMCIA serial devices, - including serial port cards, modems, and the modem functions of - multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are - credit-card size devices often used with laptops.) - - To compile this driver as a module, choose M here: the - module will be called serial_cs. - - If unsure, say N. - -config SERIAL_8250_NR_UARTS - int "Maximum number of 8250/16550 serial ports" - depends on SERIAL_8250 - default "4" - help - Set this to the number of serial ports you want the driver - to support. This includes any ports discovered via ACPI or - PCI enumeration and any ports that may be added at run-time - via hot-plug, or any ISA multi-port serial cards. - -config SERIAL_8250_RUNTIME_UARTS - int "Number of 8250/16550 serial ports to register at runtime" - depends on SERIAL_8250 - range 0 SERIAL_8250_NR_UARTS - default "4" - help - Set this to the maximum number of serial ports you want - the kernel to register at boot time. This can be overridden - with the module parameter "nr_uarts", or boot-time parameter - 8250.nr_uarts - -config SERIAL_8250_EXTENDED - bool "Extended 8250/16550 serial driver options" - depends on SERIAL_8250 - help - If you wish to use any non-standard features of the standard "dumb" - driver, say Y here. This includes HUB6 support, shared serial - interrupts, special multiport support, support for more than the - four COM 1/2/3/4 boards, etc. - - Note that the answer to this question won't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about serial driver options. If unsure, say N. - -config SERIAL_8250_MANY_PORTS - bool "Support more than 4 legacy serial ports" - depends on SERIAL_8250_EXTENDED && !IA64 - help - Say Y here if you have dumb serial boards other than the four - standard COM 1/2/3/4 ports. This may happen if you have an AST - FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available - from ), or other custom - serial port hardware which acts similar to standard serial port - hardware. If you only use the standard COM 1/2/3/4 ports, you can - say N here to save some memory. You can also say Y if you have an - "intelligent" multiport card such as Cyclades, Digiboards, etc. - -# -# Multi-port serial cards -# - -config SERIAL_8250_FOURPORT - tristate "Support Fourport cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have an AST FourPort serial board. - - To compile this driver as a module, choose M here: the module - will be called 8250_fourport. - -config SERIAL_8250_ACCENT - tristate "Support Accent cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have an Accent Async serial board. - - To compile this driver as a module, choose M here: the module - will be called 8250_accent. - -config SERIAL_8250_BOCA - tristate "Support Boca cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have a Boca serial board. Please read the Boca - mini-HOWTO, available from - - To compile this driver as a module, choose M here: the module - will be called 8250_boca. - -config SERIAL_8250_EXAR_ST16C554 - tristate "Support Exar ST16C554/554D Quad UART" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - The Uplogix Envoy TU301 uses this Exar Quad UART. If you are - tinkering with your Envoy TU301, or have a machine with this UART, - say Y here. - - To compile this driver as a module, choose M here: the module - will be called 8250_exar_st16c554. - -config SERIAL_8250_HUB6 - tristate "Support Hub6 cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have a HUB6 serial board. - - To compile this driver as a module, choose M here: the module - will be called 8250_hub6. - -config SERIAL_8250_SHARE_IRQ - bool "Support for sharing serial interrupts" - depends on SERIAL_8250_EXTENDED - help - Some serial boards have hardware support which allows multiple dumb - serial ports on the same board to share a single IRQ. To enable - support for this in the serial driver, say Y here. - -config SERIAL_8250_DETECT_IRQ - bool "Autodetect IRQ on standard ports (unsafe)" - depends on SERIAL_8250_EXTENDED - help - Say Y here if you want the kernel to try to guess which IRQ - to use for your serial port. - - This is considered unsafe; it is far better to configure the IRQ in - a boot script using the setserial command. - - If unsure, say N. - -config SERIAL_8250_RSA - bool "Support RSA serial ports" - depends on SERIAL_8250_EXTENDED - help - ::: To be written ::: - -config SERIAL_8250_MCA - tristate "Support 8250-type ports on MCA buses" - depends on SERIAL_8250 != n && MCA - help - Say Y here if you have a MCA serial ports. - - To compile this driver as a module, choose M here: the module - will be called 8250_mca. - -config SERIAL_8250_ACORN - tristate "Acorn expansion card serial port support" - depends on ARCH_ACORN && SERIAL_8250 - help - If you have an Atomwide Serial card or Serial Port card for an Acorn - system, say Y to this option. The driver can handle 1, 2, or 3 port - cards. If unsure, say N. - -config SERIAL_8250_RM9K - bool "Support for MIPS RM9xxx integrated serial port" - depends on SERIAL_8250 != n && SERIAL_RM9000 - select SERIAL_8250_SHARE_IRQ - help - Selecting this option will add support for the integrated serial - port hardware found on MIPS RM9122 and similar processors. - If unsure, say N. - -comment "Non-8250 serial port support" - -config SERIAL_AMBA_PL010 - tristate "ARM AMBA PL010 serial port support" - depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) - select SERIAL_CORE - help - This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have - an Integrator/AP or Integrator/PP2 platform, or if you have a - Cirrus Logic EP93xx CPU, say Y or M here. - - If unsure, say N. - -config SERIAL_AMBA_PL010_CONSOLE - bool "Support for console on AMBA serial port" - depends on SERIAL_AMBA_PL010=y - select SERIAL_CORE_CONSOLE - ---help--- - Say Y here if you wish to use an AMBA PrimeCell UART as the system - console (the system console is the device which receives all kernel - messages and warnings and which allows logins in single user mode). - - Even if you say Y here, the currently visible framebuffer console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyAM0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_AMBA_PL011 - tristate "ARM AMBA PL011 serial port support" - depends on ARM_AMBA - select SERIAL_CORE - help - This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have - an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M - here. - - If unsure, say N. - -config SERIAL_AMBA_PL011_CONSOLE - bool "Support for console on AMBA serial port" - depends on SERIAL_AMBA_PL011=y - select SERIAL_CORE_CONSOLE - ---help--- - Say Y here if you wish to use an AMBA PrimeCell UART as the system - console (the system console is the device which receives all kernel - messages and warnings and which allows logins in single user mode). - - Even if you say Y here, the currently visible framebuffer console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyAMA0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_SB1250_DUART - tristate "BCM1xxx on-chip DUART serial support" - depends on SIBYTE_SB1xxx_SOC=y - select SERIAL_CORE - default y - ---help--- - Support for the asynchronous serial interface (DUART) included in - the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that - the letter D in DUART stands for "dual", which is how the device - is implemented. Depending on the SOC configuration there may be - one or more DUARTs available of which all are handled. - - If unsure, say Y. To compile this driver as a module, choose M here: - the module will be called sb1250-duart. - -config SERIAL_SB1250_DUART_CONSOLE - bool "Support for console on a BCM1xxx DUART serial port" - depends on SERIAL_SB1250_DUART=y - select SERIAL_CORE_CONSOLE - default y - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all - kernel messages and warnings and which allows logins in single user - mode). - - If unsure, say Y. - -config SERIAL_ATMEL - bool "AT91 / AT32 on-chip serial port support" - depends on (ARM && ARCH_AT91) || AVR32 - select SERIAL_CORE - help - This enables the driver for the on-chip UARTs of the Atmel - AT91 and AT32 processors. - -config SERIAL_ATMEL_CONSOLE - bool "Support for console on AT91 / AT32 serial port" - depends on SERIAL_ATMEL=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use an on-chip UART on a Atmel - AT91 or AT32 processor as the system console (the system - console is the device which receives all kernel messages and - warnings and which allows logins in single user mode). - -config SERIAL_ATMEL_PDC - bool "Support DMA transfers on AT91 / AT32 serial port" - depends on SERIAL_ATMEL - default y - help - Say Y here if you wish to use the PDC to do DMA transfers to - and from the Atmel AT91 / AT32 serial port. In order to - actually use DMA transfers, make sure that the use_dma_tx - and use_dma_rx members in the atmel_uart_data struct is set - appropriately for each port. - - Note that break and error handling currently doesn't work - properly when DMA is enabled. Make sure that ports where - this matters don't use DMA. - -config SERIAL_ATMEL_TTYAT - bool "Install as device ttyATn instead of ttySn" - depends on SERIAL_ATMEL=y - help - Say Y here if you wish to have the internal AT91 / AT32 UARTs - appear as /dev/ttyATn (major 204, minor starting at 154) - instead of the normal /dev/ttySn (major 4, minor starting at - 64). This is necessary if you also want other UARTs, such as - external 8250/16C550 compatible UARTs. - The ttySn nodes are legally reserved for the 8250 serial driver - but are often misused by other serial drivers. - - To use this, you should create suitable ttyATn device nodes in - /dev/, and pass "console=ttyATn" to the kernel. - - Say Y if you have an external 8250/16C550 UART. If unsure, say N. - -config SERIAL_KS8695 - bool "Micrel KS8695 (Centaur) serial port support" - depends on ARCH_KS8695 - select SERIAL_CORE - help - This selects the Micrel Centaur KS8695 UART. Say Y here. - -config SERIAL_KS8695_CONSOLE - bool "Support for console on KS8695 (Centaur) serial port" - depends on SERIAL_KS8695=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use a KS8695 (Centaur) UART as the - system console (the system console is the device which - receives all kernel messages and warnings and which allows - logins in single user mode). - -config SERIAL_CLPS711X - tristate "CLPS711X serial port support" - depends on ARM && ARCH_CLPS711X - select SERIAL_CORE - help - ::: To be written ::: - -config SERIAL_CLPS711X_CONSOLE - bool "Support for console on CLPS711X serial port" - depends on SERIAL_CLPS711X=y - select SERIAL_CORE_CONSOLE - help - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyCL1". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_SAMSUNG - tristate "Samsung SoC serial support" - depends on ARM && PLAT_SAMSUNG - select SERIAL_CORE - help - Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, - providing /dev/ttySAC0, 1 and 2 (note, some machines may not - provide all of these ports, depending on how the serial port - pins are configured. - -config SERIAL_SAMSUNG_UARTS_4 - bool - depends on ARM && PLAT_SAMSUNG - default y if CPU_S3C2443 - help - Internal node for the common case of 4 Samsung compatible UARTs - -config SERIAL_SAMSUNG_UARTS - int - depends on ARM && PLAT_SAMSUNG - default 2 if ARCH_S3C2400 - default 6 if ARCH_S5P6450 - default 4 if SERIAL_SAMSUNG_UARTS_4 - default 3 - help - Select the number of available UART ports for the Samsung S3C - serial driver - -config SERIAL_SAMSUNG_DEBUG - bool "Samsung SoC serial debug" - depends on SERIAL_SAMSUNG && DEBUG_LL - help - Add support for debugging the serial driver. Since this is - generally being used as a console, we use our own output - routines that go via the low-level debug printascii() - function. - -config SERIAL_SAMSUNG_CONSOLE - bool "Support for console on Samsung SoC serial port" - depends on SERIAL_SAMSUNG=y - select SERIAL_CORE_CONSOLE - help - Allow selection of the S3C24XX on-board serial ports for use as - an virtual console. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttySACx". (Try "man bootparam" or see the documentation of - your boot loader about how to pass options to the kernel at - boot time.) - -config SERIAL_S3C2400 - tristate "Samsung S3C2410 Serial port support" - depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400 - default y if CPU_S3C2400 - help - Serial port support for the Samsung S3C2400 SoC - -config SERIAL_S3C2410 - tristate "Samsung S3C2410 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C2410 - default y if CPU_S3C2410 - help - Serial port support for the Samsung S3C2410 SoC - -config SERIAL_S3C2412 - tristate "Samsung S3C2412/S3C2413 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C2412 - default y if CPU_S3C2412 - help - Serial port support for the Samsung S3C2412 and S3C2413 SoC - -config SERIAL_S3C2440 - tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416) - default y if CPU_S3C2440 - default y if CPU_S3C2442 - select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416 - help - Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC - -config SERIAL_S3C24A0 - tristate "Samsung S3C24A0 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C24A0 - default y if CPU_S3C24A0 - help - Serial port support for the Samsung S3C24A0 SoC - -config SERIAL_S3C6400 - tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) - select SERIAL_SAMSUNG_UARTS_4 - default y - help - Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 - and S5PC100 SoCs - -config SERIAL_S5PV210 - tristate "Samsung S5PV210 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_S5PV310) - select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_S5PV310) - default y - help - Serial port support for Samsung's S5P Family of SoC's - - -config SERIAL_MAX3100 - tristate "MAX3100 support" - depends on SPI - select SERIAL_CORE - help - MAX3100 chip support - -config SERIAL_MAX3107 - tristate "MAX3107 support" - depends on SPI - select SERIAL_CORE - help - MAX3107 chip support - -config SERIAL_MAX3107_AAVA - tristate "MAX3107 AAVA platform support" - depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB - select SERIAL_CORE - help - Support for the MAX3107 chip configuration found on the AAVA - platform. Includes the extra initialisation and GPIO support - neded for this device. - -config SERIAL_DZ - bool "DECstation DZ serial driver" - depends on MACH_DECSTATION && 32BIT - select SERIAL_CORE - default y - ---help--- - DZ11-family serial controllers for DECstations and VAXstations, - including the DC7085, M7814, and M7819. - -config SERIAL_DZ_CONSOLE - bool "Support console on DECstation DZ serial driver" - depends on SERIAL_DZ=y - select SERIAL_CORE_CONSOLE - default y - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all - kernel messages and warnings and which allows logins in single user - mode). - - Note that the firmware uses ttyS3 as the serial console on - DECstations that use this driver. - - If unsure, say Y. - -config SERIAL_ZS - tristate "DECstation Z85C30 serial support" - depends on MACH_DECSTATION - select SERIAL_CORE - default y - ---help--- - Support for the Zilog 85C350 serial communications controller used - for serial ports in newer DECstation systems. These include the - DECsystem 5900 and all models of the DECstation and DECsystem 5000 - systems except from model 200. - - If unsure, say Y. To compile this driver as a module, choose M here: - the module will be called zs. - -config SERIAL_ZS_CONSOLE - bool "Support for console on a DECstation Z85C30 serial port" - depends on SERIAL_ZS=y - select SERIAL_CORE_CONSOLE - default y - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all - kernel messages and warnings and which allows logins in single user - mode). - - Note that the firmware uses ttyS1 as the serial console on the - Maxine and ttyS3 on the others using this driver. - - If unsure, say Y. - -config SERIAL_21285 - tristate "DC21285 serial port support" - depends on ARM && FOOTBRIDGE - select SERIAL_CORE - help - If you have a machine based on a 21285 (Footbridge) StrongARM(R)/ - PCI bridge you can enable its onboard serial port by enabling this - option. - -config SERIAL_21285_CONSOLE - bool "Console on DC21285 serial port" - depends on SERIAL_21285=y - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the 21285 footbridge you can - make it the console by answering Y to this option. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyFB". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_MPSC - bool "Marvell MPSC serial port support" - depends on PPC32 && MV64X60 - select SERIAL_CORE - help - Say Y here if you want to use the Marvell MPSC serial controller. - -config SERIAL_MPSC_CONSOLE - bool "Support for console on Marvell MPSC serial port" - depends on SERIAL_MPSC - select SERIAL_CORE_CONSOLE - help - Say Y here if you want to support a serial console on a Marvell MPSC. - -config SERIAL_PXA - bool "PXA serial port support" - depends on ARCH_PXA || ARCH_MMP - select SERIAL_CORE - help - If you have a machine based on an Intel XScale PXA2xx CPU you - can enable its onboard serial ports by enabling this option. - -config SERIAL_PXA_CONSOLE - bool "Console on PXA serial port" - depends on SERIAL_PXA - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the Intel XScale PXA - CPU you can make it the console by answering Y to this option. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttySA0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_SA1100 - bool "SA1100 serial port support" - depends on ARM && ARCH_SA1100 - select SERIAL_CORE - help - If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you - can enable its onboard serial port by enabling this option. - Please read for further - info. - -config SERIAL_SA1100_CONSOLE - bool "Console on SA1100 serial port" - depends on SERIAL_SA1100 - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the SA1100/SA1110 StrongARM - CPU you can make it the console by answering Y to this option. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttySA0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_MRST_MAX3110 - tristate "SPI UART driver for Max3110" - depends on SPI_DW_PCI - select SERIAL_CORE - select SERIAL_CORE_CONSOLE - help - This is the UART protocol driver for the MAX3110 device on - the Intel Moorestown platform. On other systems use the max3100 - driver. - -config SERIAL_MFD_HSU - tristate "Medfield High Speed UART support" - depends on PCI - select SERIAL_CORE - -config SERIAL_MFD_HSU_CONSOLE - boolean "Medfile HSU serial console support" - depends on SERIAL_MFD_HSU=y - select SERIAL_CORE_CONSOLE - -config SERIAL_BFIN - tristate "Blackfin serial port support" - depends on BLACKFIN - select SERIAL_CORE - select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561) - help - Add support for the built-in UARTs on the Blackfin. - - To compile this driver as a module, choose M here: the - module will be called bfin_5xx. - -config SERIAL_BFIN_CONSOLE - bool "Console on Blackfin serial port" - depends on SERIAL_BFIN=y - select SERIAL_CORE_CONSOLE - -choice - prompt "UART Mode" - depends on SERIAL_BFIN - default SERIAL_BFIN_DMA - help - This driver supports the built-in serial ports of the Blackfin family - of CPUs - -config SERIAL_BFIN_DMA - bool "DMA mode" - depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n - help - This driver works under DMA mode. If this option is selected, the - blackfin simple dma driver is also enabled. - -config SERIAL_BFIN_PIO - bool "PIO mode" - help - This driver works under PIO mode. - -endchoice - -config SERIAL_BFIN_UART0 - bool "Enable UART0" - depends on SERIAL_BFIN - help - Enable UART0 - -config BFIN_UART0_CTSRTS - bool "Enable UART0 hardware flow control" - depends on SERIAL_BFIN_UART0 - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_UART1 - bool "Enable UART1" - depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561) - help - Enable UART1 - -config BFIN_UART1_CTSRTS - bool "Enable UART1 hardware flow control" - depends on SERIAL_BFIN_UART1 - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_UART2 - bool "Enable UART2" - depends on SERIAL_BFIN && (BF54x || BF538 || BF539) - help - Enable UART2 - -config BFIN_UART2_CTSRTS - bool "Enable UART2 hardware flow control" - depends on SERIAL_BFIN_UART2 - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_UART3 - bool "Enable UART3" - depends on SERIAL_BFIN && (BF54x) - help - Enable UART3 - -config BFIN_UART3_CTSRTS - bool "Enable UART3 hardware flow control" - depends on SERIAL_BFIN_UART3 - help - Enable hardware flow control in the driver. - -config SERIAL_IMX - bool "IMX serial port support" - depends on ARM && (ARCH_IMX || ARCH_MXC) - select SERIAL_CORE - select RATIONAL - help - If you have a machine based on a Motorola IMX CPU you - can enable its onboard serial port by enabling this option. - -config SERIAL_IMX_CONSOLE - bool "Console on IMX serial port" - depends on SERIAL_IMX - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the Motorola IMX - CPU you can make it the console by answering Y to this option. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttySA0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_UARTLITE - tristate "Xilinx uartlite serial port support" - depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE - select SERIAL_CORE - help - Say Y here if you want to use the Xilinx uartlite serial controller. - - To compile this driver as a module, choose M here: the - module will be called uartlite. - -config SERIAL_UARTLITE_CONSOLE - bool "Support for console on Xilinx uartlite serial port" - depends on SERIAL_UARTLITE=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use a Xilinx uartlite as the system - console (the system console is the device which receives all kernel - messages and warnings and which allows logins in single user mode). - -config SERIAL_SUNCORE - bool - depends on SPARC - select SERIAL_CORE - select SERIAL_CORE_CONSOLE - default y - -config SERIAL_SUNZILOG - tristate "Sun Zilog8530 serial support" - depends on SPARC - help - This driver supports the Zilog8530 serial ports found on many Sparc - systems. Say Y or M if you want to be able to these serial ports. - -config SERIAL_SUNZILOG_CONSOLE - bool "Console on Sun Zilog8530 serial port" - depends on SERIAL_SUNZILOG=y - help - If you would like to be able to use the Zilog8530 serial port - on your Sparc system as the console, you can do so by answering - Y to this option. - -config SERIAL_SUNSU - tristate "Sun SU serial support" - depends on SPARC && PCI - help - This driver supports the 8250 serial ports that run the keyboard and - mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able - to these serial ports. - -config SERIAL_SUNSU_CONSOLE - bool "Console on Sun SU serial port" - depends on SERIAL_SUNSU=y - help - If you would like to be able to use the SU serial port - on your Sparc system as the console, you can do so by answering - Y to this option. - -config SERIAL_MUX - tristate "Serial MUX support" - depends on GSC - select SERIAL_CORE - default y - ---help--- - Saying Y here will enable the hardware MUX serial driver for - the Nova, K class systems and D class with a 'remote control card'. - The hardware MUX is not 8250/16550 compatible therefore the - /dev/ttyB0 device is shared between the Serial MUX and the PDC - software console. The following steps need to be completed to use - the Serial MUX: - - 1. create the device entry (mknod /dev/ttyB0 c 11 0) - 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 - 3. Add device ttyB0 to /etc/securetty (if you want to log on as - root on this console.) - 4. Change the kernel command console parameter to: console=ttyB0 - -config SERIAL_MUX_CONSOLE - bool "Support for console on serial MUX" - depends on SERIAL_MUX=y - select SERIAL_CORE_CONSOLE - default y - -config PDC_CONSOLE - bool "PDC software console support" - depends on PARISC && !SERIAL_MUX && VT - default n - help - Saying Y here will enable the software based PDC console to be - used as the system console. This is useful for machines in - which the hardware based console has not been written yet. The - following steps must be competed to use the PDC console: - - 1. create the device entry (mknod /dev/ttyB0 c 11 0) - 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 - 3. Add device ttyB0 to /etc/securetty (if you want to log on as - root on this console.) - 4. Change the kernel command console parameter to: console=ttyB0 - -config SERIAL_SUNSAB - tristate "Sun Siemens SAB82532 serial support" - depends on SPARC && PCI - help - This driver supports the Siemens SAB82532 DUSCC serial ports on newer - (PCI) UltraSPARC systems. Say Y or M if you want to be able to these - serial ports. - -config SERIAL_SUNSAB_CONSOLE - bool "Console on Sun Siemens SAB82532 serial port" - depends on SERIAL_SUNSAB=y - help - If you would like to be able to use the SAB82532 serial port - on your Sparc system as the console, you can do so by answering - Y to this option. - -config SERIAL_SUNHV - bool "Sun4v Hypervisor Console support" - depends on SPARC64 - help - This driver supports the console device found on SUN4V Sparc - systems. Say Y if you want to be able to use this device. - -config SERIAL_IP22_ZILOG - tristate "SGI Zilog8530 serial support" - depends on SGI_HAS_ZILOG - select SERIAL_CORE - help - This driver supports the Zilog8530 serial ports found on SGI - systems. Say Y or M if you want to be able to these serial ports. - -config SERIAL_IP22_ZILOG_CONSOLE - bool "Console on SGI Zilog8530 serial port" - depends on SERIAL_IP22_ZILOG=y - select SERIAL_CORE_CONSOLE - -config SERIAL_SH_SCI - tristate "SuperH SCI(F) serial port support" - depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE) - select SERIAL_CORE - -config SERIAL_SH_SCI_NR_UARTS - int "Maximum number of SCI(F) serial ports" - depends on SERIAL_SH_SCI - default "2" - -config SERIAL_SH_SCI_CONSOLE - bool "Support for console on SuperH SCI(F)" - depends on SERIAL_SH_SCI=y - select SERIAL_CORE_CONSOLE - -config SERIAL_SH_SCI_DMA - bool "DMA support" - depends on SERIAL_SH_SCI && SH_DMAE && EXPERIMENTAL - -config SERIAL_PNX8XXX - bool "Enable PNX8XXX SoCs' UART Support" - depends on MIPS && (SOC_PNX8550 || SOC_PNX833X) - select SERIAL_CORE - help - If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 - and you want to use serial ports, say Y. Otherwise, say N. - -config SERIAL_PNX8XXX_CONSOLE - bool "Enable PNX8XX0 serial console" - depends on SERIAL_PNX8XXX - select SERIAL_CORE_CONSOLE - help - If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 - and you want to use serial console, say Y. Otherwise, say N. - -config SERIAL_CORE - tristate - -config SERIAL_CORE_CONSOLE - bool - -config CONSOLE_POLL - bool - -config SERIAL_68328 - bool "68328 serial support" - depends on M68328 || M68EZ328 || M68VZ328 - help - This driver supports the built-in serial port of the Motorola 68328 - (standard, EZ and VZ varieties). - -config SERIAL_68328_RTS_CTS - bool "Support RTS/CTS on 68328 serial port" - depends on SERIAL_68328 - -config SERIAL_MCF - bool "Coldfire serial support" - depends on COLDFIRE - select SERIAL_CORE - help - This serial driver supports the Freescale Coldfire serial ports. - -config SERIAL_MCF_BAUDRATE - int "Default baudrate for Coldfire serial ports" - depends on SERIAL_MCF - default 19200 - help - This setting lets you define what the default baudrate is for the - ColdFire serial ports. The usual default varies from board to board, - and this setting is a way of catering for that. - -config SERIAL_MCF_CONSOLE - bool "Coldfire serial console support" - depends on SERIAL_MCF - select SERIAL_CORE_CONSOLE - help - Enable a ColdFire internal serial port to be the system console. - -config SERIAL_68360_SMC - bool "68360 SMC uart support" - depends on M68360 - help - This driver supports the SMC serial ports of the Motorola 68360 CPU. - -config SERIAL_68360_SCC - bool "68360 SCC uart support" - depends on M68360 - help - This driver supports the SCC serial ports of the Motorola 68360 CPU. - -config SERIAL_68360 - bool - depends on SERIAL_68360_SMC || SERIAL_68360_SCC - default y - -config SERIAL_PMACZILOG - tristate "Mac or PowerMac z85c30 ESCC support" - depends on (M68K && MAC) || (PPC_OF && PPC_PMAC) - select SERIAL_CORE - help - This driver supports the Zilog z85C30 serial ports found on - (Power)Mac machines. - Say Y or M if you want to be able to these serial ports. - -config SERIAL_PMACZILOG_TTYS - bool "Use ttySn device nodes for Zilog z85c30" - depends on SERIAL_PMACZILOG - help - The pmac_zilog driver for the z85C30 chip on many powermacs - historically used the device numbers for /dev/ttySn. The - 8250 serial port driver also uses these numbers, which means - the two drivers being unable to coexist; you could not use - both z85C30 and 8250 type ports at the same time. - - If this option is not selected, the pmac_zilog driver will - use the device numbers allocated for /dev/ttyPZn. This allows - the pmac_zilog and 8250 drivers to co-exist, but may cause - existing userspace setups to break. Programs that need to - access the built-in serial ports on powermacs will need to - be reconfigured to use /dev/ttyPZn instead of /dev/ttySn. - - If you enable this option, any z85c30 ports in the system will - be registered as ttyS0 onwards as in the past, and you will be - unable to use the 8250 module for PCMCIA or other 16C550-style - UARTs. - - Say N unless you need the z85c30 ports on your (Power)Mac - to appear as /dev/ttySn. - -config SERIAL_PMACZILOG_CONSOLE - bool "Console on Mac or PowerMac z85c30 serial port" - depends on SERIAL_PMACZILOG=y - select SERIAL_CORE_CONSOLE - help - If you would like to be able to use the z85c30 serial port - on your (Power)Mac as the console, you can do so by answering - Y to this option. - -config SERIAL_LH7A40X - tristate "Sharp LH7A40X embedded UART support" - depends on ARM && ARCH_LH7A40X - select SERIAL_CORE - help - This enables support for the three on-board UARTs of the - Sharp LH7A40X series CPUs. Choose Y or M. - -config SERIAL_LH7A40X_CONSOLE - bool "Support for console on Sharp LH7A40X serial port" - depends on SERIAL_LH7A40X=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use one of the serial ports as the - system console--the system console is the device which - receives all kernel messages and warnings and which allows - logins in single user mode. - - Even if you say Y here, the currently visible framebuffer console - (/dev/tty0) will still be used as the default system console, but - you can alter that using a kernel command line, for example - "console=ttyAM1". - -config SERIAL_CPM - tristate "CPM SCC/SMC serial port support" - depends on CPM2 || 8xx - select SERIAL_CORE - help - This driver supports the SCC and SMC serial ports on Motorola - embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx) - -config SERIAL_CPM_CONSOLE - bool "Support for console on CPM SCC/SMC serial port" - depends on SERIAL_CPM=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you wish to use a SCC or SMC CPM UART as the system - console (the system console is the device which receives all kernel - messages and warnings and which allows logins in single user mode). - - Even if you say Y here, the currently visible framebuffer console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyCPM0". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - -config SERIAL_SGI_L1_CONSOLE - bool "SGI Altix L1 serial console support" - depends on IA64_GENERIC || IA64_SGI_SN2 - select SERIAL_CORE - select SERIAL_CORE_CONSOLE - help - If you have an SGI Altix and you would like to use the system - controller serial port as your console (you want this!), - say Y. Otherwise, say N. - -config SERIAL_MPC52xx - tristate "Freescale MPC52xx/MPC512x family PSC serial support" - depends on PPC_MPC52xx || PPC_MPC512x - select SERIAL_CORE - help - This driver supports MPC52xx and MPC512x PSC serial ports. If you would - like to use them, you must answer Y or M to this option. Note that - for use as console, it must be included in kernel and not as a - module. - -config SERIAL_MPC52xx_CONSOLE - bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port" - depends on SERIAL_MPC52xx=y - select SERIAL_CORE_CONSOLE - help - Select this options if you'd like to use one of the PSC serial port - of the Freescale MPC52xx family as a console. - -config SERIAL_MPC52xx_CONSOLE_BAUD - int "Freescale MPC52xx/MPC512x family PSC serial port baud" - depends on SERIAL_MPC52xx_CONSOLE=y - default "9600" - help - Select the MPC52xx console baud rate. - This value is only used if the bootloader doesn't pass in the - console baudrate - -config SERIAL_ICOM - tristate "IBM Multiport Serial Adapter" - depends on PCI && (PPC_ISERIES || PPC_PSERIES) - select SERIAL_CORE - select FW_LOADER - help - This driver is for a family of multiport serial adapters - including 2 port RVX, 2 port internal modem, 4 port internal - modem and a split 1 port RVX and 1 port internal modem. - - This driver can also be built as a module. If so, the module - will be called icom. - -config SERIAL_M32R_SIO - bool "M32R SIO I/F" - depends on M32R - default y - select SERIAL_CORE - help - Say Y here if you want to use the M32R serial controller. - -config SERIAL_M32R_SIO_CONSOLE - bool "use SIO console" - depends on SERIAL_M32R_SIO=y - select SERIAL_CORE_CONSOLE - help - Say Y here if you want to support a serial console. - - If you use an M3T-M32700UT or an OPSPUT platform, - please say also y for SERIAL_M32R_PLDSIO. - -config SERIAL_M32R_PLDSIO - bool "M32R SIO I/F on a PLD" - depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT) - default n - help - Say Y here if you want to use the M32R serial controller - on a PLD (Programmable Logic Device). - - If you use an M3T-M32700UT or an OPSPUT platform, - please say Y. - -config SERIAL_TXX9 - bool "TMPTX39XX/49XX SIO support" - depends on HAS_TXX9_SERIAL - select SERIAL_CORE - default y - -config HAS_TXX9_SERIAL - bool - -config SERIAL_TXX9_NR_UARTS - int "Maximum number of TMPTX39XX/49XX SIO ports" - depends on SERIAL_TXX9 - default "6" - -config SERIAL_TXX9_CONSOLE - bool "TMPTX39XX/49XX SIO Console support" - depends on SERIAL_TXX9=y - select SERIAL_CORE_CONSOLE - -config SERIAL_TXX9_STDSERIAL - bool "TX39XX/49XX SIO act as standard serial" - depends on !SERIAL_8250 && SERIAL_TXX9 - -config SERIAL_VR41XX - tristate "NEC VR4100 series Serial Interface Unit support" - depends on CPU_VR41XX - select SERIAL_CORE - help - If you have a NEC VR4100 series processor and you want to use - Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU) - (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N. - -config SERIAL_VR41XX_CONSOLE - bool "Enable NEC VR4100 series Serial Interface Unit console" - depends on SERIAL_VR41XX=y - select SERIAL_CORE_CONSOLE - help - If you have a NEC VR4100 series processor and you want to use - a console on a serial port, say Y. Otherwise, say N. - -config SERIAL_JSM - tristate "Digi International NEO PCI Support" - depends on PCI - select SERIAL_CORE - help - This is a driver for Digi International's Neo series - of cards which provide multiple serial ports. You would need - something like this to connect more than two modems to your Linux - box, for instance in order to become a dial-in server. This driver - supports PCI boards only. - - If you have a card like this, say Y here, otherwise say N. - - To compile this driver as a module, choose M here: the - module will be called jsm. - -config SERIAL_SGI_IOC4 - tristate "SGI IOC4 controller serial support" - depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4 - select SERIAL_CORE - help - If you have an SGI Altix with an IOC4 based Base IO card - and wish to use the serial ports on this card, say Y. - Otherwise, say N. - -config SERIAL_SGI_IOC3 - tristate "SGI Altix IOC3 serial support" - depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3 - select SERIAL_CORE - help - If you have an SGI Altix with an IOC3 serial card, - say Y or M. Otherwise, say N. - -config SERIAL_MSM - bool "MSM on-chip serial port support" - depends on ARM && ARCH_MSM - select SERIAL_CORE - -config SERIAL_MSM_CONSOLE - bool "MSM serial console support" - depends on SERIAL_MSM=y - select SERIAL_CORE_CONSOLE - -config SERIAL_VT8500 - bool "VIA VT8500 on-chip serial port support" - depends on ARM && ARCH_VT8500 - select SERIAL_CORE - -config SERIAL_VT8500_CONSOLE - bool "VIA VT8500 serial console support" - depends on SERIAL_VT8500=y - select SERIAL_CORE_CONSOLE - -config SERIAL_NETX - tristate "NetX serial port support" - depends on ARM && ARCH_NETX - select SERIAL_CORE - help - If you have a machine based on a Hilscher NetX SoC you - can enable its onboard serial port by enabling this option. - - To compile this driver as a module, choose M here: the - module will be called netx-serial. - -config SERIAL_NETX_CONSOLE - bool "Console on NetX serial port" - depends on SERIAL_NETX=y - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the Hilscher NetX SoC - you can make it the console by answering Y to this option. - -config SERIAL_OF_PLATFORM - tristate "Serial port on Open Firmware platform bus" - depends on OF - depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL - help - If you have a PowerPC based system that has serial ports - on a platform specific bus, you should enable this option. - Currently, only 8250 compatible ports are supported, but - others can easily be added. - -config SERIAL_OMAP - tristate "OMAP serial port support" - depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 - select SERIAL_CORE - help - If you have a machine based on an Texas Instruments OMAP CPU you - can enable its onboard serial ports by enabling this option. - - By enabling this option you take advantage of dma feature available - with the omap-serial driver. DMA support can be enabled from platform - data. - -config SERIAL_OMAP_CONSOLE - bool "Console on OMAP serial port" - depends on SERIAL_OMAP - select SERIAL_CORE_CONSOLE - help - Select this option if you would like to use omap serial port as - console. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyOx". (Try "man bootparam" or see the documentation of - your boot loader about how to pass options to the kernel at - boot time.) - -config SERIAL_OF_PLATFORM_NWPSERIAL - tristate "NWP serial port driver" - depends on PPC_OF && PPC_DCR - select SERIAL_OF_PLATFORM - select SERIAL_CORE_CONSOLE - select SERIAL_CORE - help - This driver supports the cell network processor nwp serial - device. - -config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE - bool "Console on NWP serial port" - depends on SERIAL_OF_PLATFORM_NWPSERIAL=y - select SERIAL_CORE_CONSOLE - help - Support for Console on the NWP serial ports. - -config SERIAL_QE - tristate "Freescale QUICC Engine serial port support" - depends on QUICC_ENGINE - select SERIAL_CORE - select FW_LOADER - default n - help - This driver supports the QE serial ports on Freescale embedded - PowerPC that contain a QUICC Engine. - -config SERIAL_SC26XX - tristate "SC2681/SC2692 serial port support" - depends on SNI_RM - select SERIAL_CORE - help - This is a driver for the onboard serial ports of - older RM400 machines. - -config SERIAL_SC26XX_CONSOLE - bool "Console on SC2681/SC2692 serial port" - depends on SERIAL_SC26XX - select SERIAL_CORE_CONSOLE - help - Support for Console on SC2681/SC2692 serial ports. - -config SERIAL_BFIN_SPORT - tristate "Blackfin SPORT emulate UART" - depends on BLACKFIN - select SERIAL_CORE - help - Enable SPORT emulate UART on Blackfin series. - - To compile this driver as a module, choose M here: the - module will be called bfin_sport_uart. - -config SERIAL_BFIN_SPORT_CONSOLE - bool "Console on Blackfin sport emulated uart" - depends on SERIAL_BFIN_SPORT=y - select SERIAL_CORE_CONSOLE - -config SERIAL_BFIN_SPORT0_UART - bool "Enable UART over SPORT0" - depends on SERIAL_BFIN_SPORT && !(BF542 || BF544) - help - Enable UART over SPORT0 - -config SERIAL_BFIN_SPORT0_UART_CTSRTS - bool "Enable UART over SPORT0 hardware flow control" - depends on SERIAL_BFIN_SPORT0_UART - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_SPORT1_UART - bool "Enable UART over SPORT1" - depends on SERIAL_BFIN_SPORT - help - Enable UART over SPORT1 - -config SERIAL_BFIN_SPORT1_UART_CTSRTS - bool "Enable UART over SPORT1 hardware flow control" - depends on SERIAL_BFIN_SPORT1_UART - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_SPORT2_UART - bool "Enable UART over SPORT2" - depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) - help - Enable UART over SPORT2 - -config SERIAL_BFIN_SPORT2_UART_CTSRTS - bool "Enable UART over SPORT2 hardware flow control" - depends on SERIAL_BFIN_SPORT2_UART - help - Enable hardware flow control in the driver. - -config SERIAL_BFIN_SPORT3_UART - bool "Enable UART over SPORT3" - depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) - help - Enable UART over SPORT3 - -config SERIAL_BFIN_SPORT3_UART_CTSRTS - bool "Enable UART over SPORT3 hardware flow control" - depends on SERIAL_BFIN_SPORT3_UART - help - Enable hardware flow control in the driver. - -config SERIAL_TIMBERDALE - tristate "Support for timberdale UART" - select SERIAL_CORE - ---help--- - Add support for UART controller on timberdale. - -config SERIAL_BCM63XX - tristate "bcm63xx serial port support" - select SERIAL_CORE - depends on BCM63XX - help - If you have a bcm63xx CPU, you can enable its onboard - serial port by enabling this options. - - To compile this driver as a module, choose M here: the - module will be called bcm963xx_uart. - -config SERIAL_BCM63XX_CONSOLE - bool "Console on bcm63xx serial port" - depends on SERIAL_BCM63XX=y - select SERIAL_CORE_CONSOLE - help - If you have enabled the serial port on the bcm63xx CPU - you can make it the console by answering Y to this option. - -config SERIAL_GRLIB_GAISLER_APBUART - tristate "GRLIB APBUART serial support" - depends on OF - ---help--- - Add support for the GRLIB APBUART serial port. - -config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE - bool "Console on GRLIB APBUART serial port" - depends on SERIAL_GRLIB_GAISLER_APBUART=y - select SERIAL_CORE_CONSOLE - help - Support for running a console on the GRLIB APBUART - -config SERIAL_ALTERA_JTAGUART - tristate "Altera JTAG UART support" - select SERIAL_CORE - help - This driver supports the Altera JTAG UART port. - -config SERIAL_ALTERA_JTAGUART_CONSOLE - bool "Altera JTAG UART console support" - depends on SERIAL_ALTERA_JTAGUART=y - select SERIAL_CORE_CONSOLE - help - Enable a Altera JTAG UART port to be the system console. - -config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS - bool "Bypass output when no connection" - depends on SERIAL_ALTERA_JTAGUART_CONSOLE - select SERIAL_CORE_CONSOLE - help - Bypass console output and keep going even if there is no - JTAG terminal connection with the host. - -config SERIAL_ALTERA_UART - tristate "Altera UART support" - select SERIAL_CORE - help - This driver supports the Altera softcore UART port. - -config SERIAL_ALTERA_UART_MAXPORTS - int "Maximum number of Altera UART ports" - depends on SERIAL_ALTERA_UART - default 4 - help - This setting lets you define the maximum number of the Altera - UART ports. The usual default varies from board to board, and - this setting is a way of catering for that. - -config SERIAL_ALTERA_UART_BAUDRATE - int "Default baudrate for Altera UART ports" - depends on SERIAL_ALTERA_UART - default 115200 - help - This setting lets you define what the default baudrate is for the - Altera UART ports. The usual default varies from board to board, - and this setting is a way of catering for that. - -config SERIAL_ALTERA_UART_CONSOLE - bool "Altera UART console support" - depends on SERIAL_ALTERA_UART=y - select SERIAL_CORE_CONSOLE - help - Enable a Altera UART port to be the system console. - -config SERIAL_IFX6X60 - tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)" - depends on GPIOLIB && SPI && EXPERIMENTAL - help - Support for the IFX6x60 modem devices on Intel MID platforms. - -config SERIAL_PCH_UART - tristate "Intel EG20T PCH UART" - depends on PCI && DMADEVICES - select SERIAL_CORE - select PCH_DMA - help - This driver is for PCH(Platform controller Hub) UART of Intel EG20T - which is an IOH(Input/Output Hub) for x86 embedded processor. - Enabling PCH_DMA, this PCH UART works as DMA mode. -endmenu diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile deleted file mode 100644 index 8ea92e9c73b0..000000000000 --- a/drivers/serial/Makefile +++ /dev/null @@ -1,94 +0,0 @@ -# -# Makefile for the kernel serial device drivers. -# - -obj-$(CONFIG_SERIAL_CORE) += serial_core.o -obj-$(CONFIG_SERIAL_21285) += 21285.o - -# These Sparc drivers have to appear before others such as 8250 -# which share ttySx minor node space. Otherwise console device -# names change and other unplesantries. -obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o -obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o -obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o -obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o -obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o - -obj-$(CONFIG_SERIAL_8250) += 8250.o -obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o -obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o -obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o -obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o -obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o -obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o -obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o -obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o -obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o -obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o -obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o -obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o -obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o -obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o -obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o -obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o -obj-$(CONFIG_SERIAL_PXA) += pxa.o -obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o -obj-$(CONFIG_SERIAL_SA1100) += sa1100.o -obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o -obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o -obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o -obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o -obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o -obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o -obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o -obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o -obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o -obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o -obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o -obj-$(CONFIG_SERIAL_MAX3100) += max3100.o -obj-$(CONFIG_SERIAL_MAX3107) += max3107.o -obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o -obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o -obj-$(CONFIG_SERIAL_MUX) += mux.o -obj-$(CONFIG_SERIAL_68328) += 68328serial.o -obj-$(CONFIG_SERIAL_68360) += 68360serial.o -obj-$(CONFIG_SERIAL_MCF) += mcf.o -obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o -obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o -obj-$(CONFIG_SERIAL_DZ) += dz.o -obj-$(CONFIG_SERIAL_ZS) += zs.o -obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o -obj-$(CONFIG_SERIAL_SGI_L1_CONSOLE) += sn_console.o -obj-$(CONFIG_SERIAL_CPM) += cpm_uart/ -obj-$(CONFIG_SERIAL_IMX) += imx.o -obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o -obj-$(CONFIG_SERIAL_ICOM) += icom.o -obj-$(CONFIG_SERIAL_M32R_SIO) += m32r_sio.o -obj-$(CONFIG_SERIAL_MPSC) += mpsc.o -obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o -obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o -obj-$(CONFIG_SERIAL_SC26XX) += sc26xx.o -obj-$(CONFIG_SERIAL_JSM) += jsm/ -obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o -obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o -obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o -obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o -obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o -obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o -obj-$(CONFIG_SERIAL_MSM) += msm_serial.o -obj-$(CONFIG_SERIAL_NETX) += netx-serial.o -obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o -obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o -obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o -obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o -obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o -obj-$(CONFIG_SERIAL_QE) += ucc_uart.o -obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o -obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o -obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o -obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o -obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o -obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o -obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o -obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o -obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o diff --git a/drivers/serial/altera_jtaguart.c b/drivers/serial/altera_jtaguart.c deleted file mode 100644 index f9b49b5ff5e1..000000000000 --- a/drivers/serial/altera_jtaguart.c +++ /dev/null @@ -1,504 +0,0 @@ -/* - * altera_jtaguart.c -- Altera JTAG UART driver - * - * Based on mcf.c -- Freescale ColdFire UART driver - * - * (C) Copyright 2003-2007, Greg Ungerer - * (C) Copyright 2008, Thomas Chou - * (C) Copyright 2010, Tobias Klauser - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "altera_jtaguart" - -/* - * Altera JTAG UART register definitions according to the Altera JTAG UART - * datasheet: http://www.altera.com/literature/hb/nios2/n2cpu_nii51009.pdf - */ - -#define ALTERA_JTAGUART_SIZE 8 - -#define ALTERA_JTAGUART_DATA_REG 0 - -#define ALTERA_JTAGUART_DATA_DATA_MSK 0x000000FF -#define ALTERA_JTAGUART_DATA_RVALID_MSK 0x00008000 -#define ALTERA_JTAGUART_DATA_RAVAIL_MSK 0xFFFF0000 -#define ALTERA_JTAGUART_DATA_RAVAIL_OFF 16 - -#define ALTERA_JTAGUART_CONTROL_REG 4 - -#define ALTERA_JTAGUART_CONTROL_RE_MSK 0x00000001 -#define ALTERA_JTAGUART_CONTROL_WE_MSK 0x00000002 -#define ALTERA_JTAGUART_CONTROL_RI_MSK 0x00000100 -#define ALTERA_JTAGUART_CONTROL_RI_OFF 8 -#define ALTERA_JTAGUART_CONTROL_WI_MSK 0x00000200 -#define ALTERA_JTAGUART_CONTROL_AC_MSK 0x00000400 -#define ALTERA_JTAGUART_CONTROL_WSPACE_MSK 0xFFFF0000 -#define ALTERA_JTAGUART_CONTROL_WSPACE_OFF 16 - -/* - * Local per-uart structure. - */ -struct altera_jtaguart { - struct uart_port port; - unsigned int sigs; /* Local copy of line sigs */ - unsigned long imr; /* Local IMR mirror */ -}; - -static unsigned int altera_jtaguart_tx_empty(struct uart_port *port) -{ - return (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & - ALTERA_JTAGUART_CONTROL_WSPACE_MSK) ? TIOCSER_TEMT : 0; -} - -static unsigned int altera_jtaguart_get_mctrl(struct uart_port *port) -{ - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; -} - -static void altera_jtaguart_set_mctrl(struct uart_port *port, unsigned int sigs) -{ -} - -static void altera_jtaguart_start_tx(struct uart_port *port) -{ - struct altera_jtaguart *pp = - container_of(port, struct altera_jtaguart, port); - - pp->imr |= ALTERA_JTAGUART_CONTROL_WE_MSK; - writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); -} - -static void altera_jtaguart_stop_tx(struct uart_port *port) -{ - struct altera_jtaguart *pp = - container_of(port, struct altera_jtaguart, port); - - pp->imr &= ~ALTERA_JTAGUART_CONTROL_WE_MSK; - writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); -} - -static void altera_jtaguart_stop_rx(struct uart_port *port) -{ - struct altera_jtaguart *pp = - container_of(port, struct altera_jtaguart, port); - - pp->imr &= ~ALTERA_JTAGUART_CONTROL_RE_MSK; - writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); -} - -static void altera_jtaguart_break_ctl(struct uart_port *port, int break_state) -{ -} - -static void altera_jtaguart_enable_ms(struct uart_port *port) -{ -} - -static void altera_jtaguart_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - /* Just copy the old termios settings back */ - if (old) - tty_termios_copy_hw(termios, old); -} - -static void altera_jtaguart_rx_chars(struct altera_jtaguart *pp) -{ - struct uart_port *port = &pp->port; - unsigned char ch, flag; - unsigned long status; - - while ((status = readl(port->membase + ALTERA_JTAGUART_DATA_REG)) & - ALTERA_JTAGUART_DATA_RVALID_MSK) { - ch = status & ALTERA_JTAGUART_DATA_DATA_MSK; - flag = TTY_NORMAL; - port->icount.rx++; - - if (uart_handle_sysrq_char(port, ch)) - continue; - uart_insert_char(port, 0, 0, ch, flag); - } - - tty_flip_buffer_push(port->state->port.tty); -} - -static void altera_jtaguart_tx_chars(struct altera_jtaguart *pp) -{ - struct uart_port *port = &pp->port; - struct circ_buf *xmit = &port->state->xmit; - unsigned int pending, count; - - if (port->x_char) { - /* Send special char - probably flow control */ - writel(port->x_char, port->membase + ALTERA_JTAGUART_DATA_REG); - port->x_char = 0; - port->icount.tx++; - return; - } - - pending = uart_circ_chars_pending(xmit); - if (pending > 0) { - count = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & - ALTERA_JTAGUART_CONTROL_WSPACE_MSK) >> - ALTERA_JTAGUART_CONTROL_WSPACE_OFF; - if (count > pending) - count = pending; - if (count > 0) { - pending -= count; - while (count--) { - writel(xmit->buf[xmit->tail], - port->membase + ALTERA_JTAGUART_DATA_REG); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - if (pending < WAKEUP_CHARS) - uart_write_wakeup(port); - } - } - - if (pending == 0) { - pp->imr &= ~ALTERA_JTAGUART_CONTROL_WE_MSK; - writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); - } -} - -static irqreturn_t altera_jtaguart_interrupt(int irq, void *data) -{ - struct uart_port *port = data; - struct altera_jtaguart *pp = - container_of(port, struct altera_jtaguart, port); - unsigned int isr; - - isr = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) >> - ALTERA_JTAGUART_CONTROL_RI_OFF) & pp->imr; - - spin_lock(&port->lock); - - if (isr & ALTERA_JTAGUART_CONTROL_RE_MSK) - altera_jtaguart_rx_chars(pp); - if (isr & ALTERA_JTAGUART_CONTROL_WE_MSK) - altera_jtaguart_tx_chars(pp); - - spin_unlock(&port->lock); - - return IRQ_RETVAL(isr); -} - -static void altera_jtaguart_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_ALTERA_JTAGUART; - - /* Clear mask, so no surprise interrupts. */ - writel(0, port->membase + ALTERA_JTAGUART_CONTROL_REG); -} - -static int altera_jtaguart_startup(struct uart_port *port) -{ - struct altera_jtaguart *pp = - container_of(port, struct altera_jtaguart, port); - unsigned long flags; - int ret; - - ret = request_irq(port->irq, altera_jtaguart_interrupt, IRQF_DISABLED, - DRV_NAME, port); - if (ret) { - pr_err(DRV_NAME ": unable to attach Altera JTAG UART %d " - "interrupt vector=%d\n", port->line, port->irq); - return ret; - } - - spin_lock_irqsave(&port->lock, flags); - - /* Enable RX interrupts now */ - pp->imr = ALTERA_JTAGUART_CONTROL_RE_MSK; - writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); - - spin_unlock_irqrestore(&port->lock, flags); - - return 0; -} - -static void altera_jtaguart_shutdown(struct uart_port *port) -{ - struct altera_jtaguart *pp = - container_of(port, struct altera_jtaguart, port); - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - - /* Disable all interrupts now */ - pp->imr = 0; - writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); - - spin_unlock_irqrestore(&port->lock, flags); - - free_irq(port->irq, port); -} - -static const char *altera_jtaguart_type(struct uart_port *port) -{ - return (port->type == PORT_ALTERA_JTAGUART) ? "Altera JTAG UART" : NULL; -} - -static int altera_jtaguart_request_port(struct uart_port *port) -{ - /* UARTs always present */ - return 0; -} - -static void altera_jtaguart_release_port(struct uart_port *port) -{ - /* Nothing to release... */ -} - -static int altera_jtaguart_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - if (ser->type != PORT_UNKNOWN && ser->type != PORT_ALTERA_JTAGUART) - return -EINVAL; - return 0; -} - -/* - * Define the basic serial functions we support. - */ -static struct uart_ops altera_jtaguart_ops = { - .tx_empty = altera_jtaguart_tx_empty, - .get_mctrl = altera_jtaguart_get_mctrl, - .set_mctrl = altera_jtaguart_set_mctrl, - .start_tx = altera_jtaguart_start_tx, - .stop_tx = altera_jtaguart_stop_tx, - .stop_rx = altera_jtaguart_stop_rx, - .enable_ms = altera_jtaguart_enable_ms, - .break_ctl = altera_jtaguart_break_ctl, - .startup = altera_jtaguart_startup, - .shutdown = altera_jtaguart_shutdown, - .set_termios = altera_jtaguart_set_termios, - .type = altera_jtaguart_type, - .request_port = altera_jtaguart_request_port, - .release_port = altera_jtaguart_release_port, - .config_port = altera_jtaguart_config_port, - .verify_port = altera_jtaguart_verify_port, -}; - -#define ALTERA_JTAGUART_MAXPORTS 1 -static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS]; - -#if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE) - -int __init early_altera_jtaguart_setup(struct altera_jtaguart_platform_uart - *platp) -{ - struct uart_port *port; - int i; - - for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) { - port = &altera_jtaguart_ports[i].port; - - port->line = i; - port->type = PORT_ALTERA_JTAGUART; - port->mapbase = platp[i].mapbase; - port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->flags = ASYNC_BOOT_AUTOCONF; - port->ops = &altera_jtaguart_ops; - } - - return 0; -} - -#if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS) -static void altera_jtaguart_console_putc(struct console *co, const char c) -{ - struct uart_port *port = &(altera_jtaguart_ports + co->index)->port; - unsigned long status; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - while (((status = readl(port->membase + ALTERA_JTAGUART_CONTROL_REG)) & - ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) { - if ((status & ALTERA_JTAGUART_CONTROL_AC_MSK) == 0) { - spin_unlock_irqrestore(&port->lock, flags); - return; /* no connection activity */ - } - spin_unlock_irqrestore(&port->lock, flags); - cpu_relax(); - spin_lock_irqsave(&port->lock, flags); - } - writel(c, port->membase + ALTERA_JTAGUART_DATA_REG); - spin_unlock_irqrestore(&port->lock, flags); -} -#else -static void altera_jtaguart_console_putc(struct console *co, const char c) -{ - struct uart_port *port = &(altera_jtaguart_ports + co->index)->port; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - while ((readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & - ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) { - spin_unlock_irqrestore(&port->lock, flags); - cpu_relax(); - spin_lock_irqsave(&port->lock, flags); - } - writel(c, port->membase + ALTERA_JTAGUART_DATA_REG); - spin_unlock_irqrestore(&port->lock, flags); -} -#endif - -static void altera_jtaguart_console_write(struct console *co, const char *s, - unsigned int count) -{ - for (; count; count--, s++) { - altera_jtaguart_console_putc(co, *s); - if (*s == '\n') - altera_jtaguart_console_putc(co, '\r'); - } -} - -static int __init altera_jtaguart_console_setup(struct console *co, - char *options) -{ - struct uart_port *port; - - if (co->index < 0 || co->index >= ALTERA_JTAGUART_MAXPORTS) - return -EINVAL; - port = &altera_jtaguart_ports[co->index].port; - if (port->membase == 0) - return -ENODEV; - return 0; -} - -static struct uart_driver altera_jtaguart_driver; - -static struct console altera_jtaguart_console = { - .name = "ttyJ", - .write = altera_jtaguart_console_write, - .device = uart_console_device, - .setup = altera_jtaguart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &altera_jtaguart_driver, -}; - -static int __init altera_jtaguart_console_init(void) -{ - register_console(&altera_jtaguart_console); - return 0; -} - -console_initcall(altera_jtaguart_console_init); - -#define ALTERA_JTAGUART_CONSOLE (&altera_jtaguart_console) - -#else - -#define ALTERA_JTAGUART_CONSOLE NULL - -#endif /* CONFIG_ALTERA_JTAGUART_CONSOLE */ - -static struct uart_driver altera_jtaguart_driver = { - .owner = THIS_MODULE, - .driver_name = "altera_jtaguart", - .dev_name = "ttyJ", - .major = ALTERA_JTAGUART_MAJOR, - .minor = ALTERA_JTAGUART_MINOR, - .nr = ALTERA_JTAGUART_MAXPORTS, - .cons = ALTERA_JTAGUART_CONSOLE, -}; - -static int __devinit altera_jtaguart_probe(struct platform_device *pdev) -{ - struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data; - struct uart_port *port; - int i; - - for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) { - port = &altera_jtaguart_ports[i].port; - - port->line = i; - port->type = PORT_ALTERA_JTAGUART; - port->mapbase = platp[i].mapbase; - port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->ops = &altera_jtaguart_ops; - port->flags = ASYNC_BOOT_AUTOCONF; - - uart_add_one_port(&altera_jtaguart_driver, port); - } - - return 0; -} - -static int __devexit altera_jtaguart_remove(struct platform_device *pdev) -{ - struct uart_port *port; - int i; - - for (i = 0; i < ALTERA_JTAGUART_MAXPORTS; i++) { - port = &altera_jtaguart_ports[i].port; - if (port) - uart_remove_one_port(&altera_jtaguart_driver, port); - } - - return 0; -} - -static struct platform_driver altera_jtaguart_platform_driver = { - .probe = altera_jtaguart_probe, - .remove = __devexit_p(altera_jtaguart_remove), - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init altera_jtaguart_init(void) -{ - int rc; - - rc = uart_register_driver(&altera_jtaguart_driver); - if (rc) - return rc; - rc = platform_driver_register(&altera_jtaguart_platform_driver); - if (rc) { - uart_unregister_driver(&altera_jtaguart_driver); - return rc; - } - return 0; -} - -static void __exit altera_jtaguart_exit(void) -{ - platform_driver_unregister(&altera_jtaguart_platform_driver); - uart_unregister_driver(&altera_jtaguart_driver); -} - -module_init(altera_jtaguart_init); -module_exit(altera_jtaguart_exit); - -MODULE_DESCRIPTION("Altera JTAG UART driver"); -MODULE_AUTHOR("Thomas Chou "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c deleted file mode 100644 index 721216292a50..000000000000 --- a/drivers/serial/altera_uart.c +++ /dev/null @@ -1,608 +0,0 @@ -/* - * altera_uart.c -- Altera UART driver - * - * Based on mcf.c -- Freescale ColdFire UART driver - * - * (C) Copyright 2003-2007, Greg Ungerer - * (C) Copyright 2008, Thomas Chou - * (C) Copyright 2010, Tobias Klauser - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "altera_uart" -#define SERIAL_ALTERA_MAJOR 204 -#define SERIAL_ALTERA_MINOR 213 - -/* - * Altera UART register definitions according to the Nios UART datasheet: - * http://www.altera.com/literature/ds/ds_nios_uart.pdf - */ - -#define ALTERA_UART_SIZE 32 - -#define ALTERA_UART_RXDATA_REG 0 -#define ALTERA_UART_TXDATA_REG 4 -#define ALTERA_UART_STATUS_REG 8 -#define ALTERA_UART_CONTROL_REG 12 -#define ALTERA_UART_DIVISOR_REG 16 -#define ALTERA_UART_EOP_REG 20 - -#define ALTERA_UART_STATUS_PE_MSK 0x0001 /* parity error */ -#define ALTERA_UART_STATUS_FE_MSK 0x0002 /* framing error */ -#define ALTERA_UART_STATUS_BRK_MSK 0x0004 /* break */ -#define ALTERA_UART_STATUS_ROE_MSK 0x0008 /* RX overrun error */ -#define ALTERA_UART_STATUS_TOE_MSK 0x0010 /* TX overrun error */ -#define ALTERA_UART_STATUS_TMT_MSK 0x0020 /* TX shift register state */ -#define ALTERA_UART_STATUS_TRDY_MSK 0x0040 /* TX ready */ -#define ALTERA_UART_STATUS_RRDY_MSK 0x0080 /* RX ready */ -#define ALTERA_UART_STATUS_E_MSK 0x0100 /* exception condition */ -#define ALTERA_UART_STATUS_DCTS_MSK 0x0400 /* CTS logic-level change */ -#define ALTERA_UART_STATUS_CTS_MSK 0x0800 /* CTS logic state */ -#define ALTERA_UART_STATUS_EOP_MSK 0x1000 /* EOP written/read */ - - /* Enable interrupt on... */ -#define ALTERA_UART_CONTROL_PE_MSK 0x0001 /* ...parity error */ -#define ALTERA_UART_CONTROL_FE_MSK 0x0002 /* ...framing error */ -#define ALTERA_UART_CONTROL_BRK_MSK 0x0004 /* ...break */ -#define ALTERA_UART_CONTROL_ROE_MSK 0x0008 /* ...RX overrun */ -#define ALTERA_UART_CONTROL_TOE_MSK 0x0010 /* ...TX overrun */ -#define ALTERA_UART_CONTROL_TMT_MSK 0x0020 /* ...TX shift register empty */ -#define ALTERA_UART_CONTROL_TRDY_MSK 0x0040 /* ...TX ready */ -#define ALTERA_UART_CONTROL_RRDY_MSK 0x0080 /* ...RX ready */ -#define ALTERA_UART_CONTROL_E_MSK 0x0100 /* ...exception*/ - -#define ALTERA_UART_CONTROL_TRBK_MSK 0x0200 /* TX break */ -#define ALTERA_UART_CONTROL_DCTS_MSK 0x0400 /* Interrupt on CTS change */ -#define ALTERA_UART_CONTROL_RTS_MSK 0x0800 /* RTS signal */ -#define ALTERA_UART_CONTROL_EOP_MSK 0x1000 /* Interrupt on EOP */ - -/* - * Local per-uart structure. - */ -struct altera_uart { - struct uart_port port; - struct timer_list tmr; - unsigned int sigs; /* Local copy of line sigs */ - unsigned short imr; /* Local IMR mirror */ -}; - -static u32 altera_uart_readl(struct uart_port *port, int reg) -{ - struct altera_uart_platform_uart *platp = port->private_data; - - return readl(port->membase + (reg << platp->bus_shift)); -} - -static void altera_uart_writel(struct uart_port *port, u32 dat, int reg) -{ - struct altera_uart_platform_uart *platp = port->private_data; - - writel(dat, port->membase + (reg << platp->bus_shift)); -} - -static unsigned int altera_uart_tx_empty(struct uart_port *port) -{ - return (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & - ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0; -} - -static unsigned int altera_uart_get_mctrl(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - unsigned int sigs; - - sigs = (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & - ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0; - sigs |= (pp->sigs & TIOCM_RTS); - - return sigs; -} - -static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - - pp->sigs = sigs; - if (sigs & TIOCM_RTS) - pp->imr |= ALTERA_UART_CONTROL_RTS_MSK; - else - pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); -} - -static void altera_uart_start_tx(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - - pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); -} - -static void altera_uart_stop_tx(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - - pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); -} - -static void altera_uart_stop_rx(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - - pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); -} - -static void altera_uart_break_ctl(struct uart_port *port, int break_state) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - if (break_state == -1) - pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK; - else - pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void altera_uart_enable_ms(struct uart_port *port) -{ -} - -static void altera_uart_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - unsigned long flags; - unsigned int baud, baudclk; - - baud = uart_get_baud_rate(port, termios, old, 0, 4000000); - baudclk = port->uartclk / baud; - - if (old) - tty_termios_copy_hw(termios, old); - tty_termios_encode_baud_rate(termios, baud, baud); - - spin_lock_irqsave(&port->lock, flags); - uart_update_timeout(port, termios->c_cflag, baud); - altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void altera_uart_rx_chars(struct altera_uart *pp) -{ - struct uart_port *port = &pp->port; - unsigned char ch, flag; - unsigned short status; - - while ((status = altera_uart_readl(port, ALTERA_UART_STATUS_REG)) & - ALTERA_UART_STATUS_RRDY_MSK) { - ch = altera_uart_readl(port, ALTERA_UART_RXDATA_REG); - flag = TTY_NORMAL; - port->icount.rx++; - - if (status & ALTERA_UART_STATUS_E_MSK) { - altera_uart_writel(port, status, - ALTERA_UART_STATUS_REG); - - if (status & ALTERA_UART_STATUS_BRK_MSK) { - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } else if (status & ALTERA_UART_STATUS_PE_MSK) { - port->icount.parity++; - } else if (status & ALTERA_UART_STATUS_ROE_MSK) { - port->icount.overrun++; - } else if (status & ALTERA_UART_STATUS_FE_MSK) { - port->icount.frame++; - } - - status &= port->read_status_mask; - - if (status & ALTERA_UART_STATUS_BRK_MSK) - flag = TTY_BREAK; - else if (status & ALTERA_UART_STATUS_PE_MSK) - flag = TTY_PARITY; - else if (status & ALTERA_UART_STATUS_FE_MSK) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, ch)) - continue; - uart_insert_char(port, status, ALTERA_UART_STATUS_ROE_MSK, ch, - flag); - } - - tty_flip_buffer_push(port->state->port.tty); -} - -static void altera_uart_tx_chars(struct altera_uart *pp) -{ - struct uart_port *port = &pp->port; - struct circ_buf *xmit = &port->state->xmit; - - if (port->x_char) { - /* Send special char - probably flow control */ - altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG); - port->x_char = 0; - port->icount.tx++; - return; - } - - while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & - ALTERA_UART_STATUS_TRDY_MSK) { - if (xmit->head == xmit->tail) - break; - altera_uart_writel(port, xmit->buf[xmit->tail], - ALTERA_UART_TXDATA_REG); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (xmit->head == xmit->tail) { - pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); - } -} - -static irqreturn_t altera_uart_interrupt(int irq, void *data) -{ - struct uart_port *port = data; - struct altera_uart *pp = container_of(port, struct altera_uart, port); - unsigned int isr; - - isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr; - - spin_lock(&port->lock); - if (isr & ALTERA_UART_STATUS_RRDY_MSK) - altera_uart_rx_chars(pp); - if (isr & ALTERA_UART_STATUS_TRDY_MSK) - altera_uart_tx_chars(pp); - spin_unlock(&port->lock); - - return IRQ_RETVAL(isr); -} - -static void altera_uart_timer(unsigned long data) -{ - struct uart_port *port = (void *)data; - struct altera_uart *pp = container_of(port, struct altera_uart, port); - - altera_uart_interrupt(0, port); - mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port)); -} - -static void altera_uart_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_ALTERA_UART; - - /* Clear mask, so no surprise interrupts. */ - altera_uart_writel(port, 0, ALTERA_UART_CONTROL_REG); - /* Clear status register */ - altera_uart_writel(port, 0, ALTERA_UART_STATUS_REG); -} - -static int altera_uart_startup(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - unsigned long flags; - int ret; - - if (!port->irq) { - setup_timer(&pp->tmr, altera_uart_timer, (unsigned long)port); - mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port)); - return 0; - } - - ret = request_irq(port->irq, altera_uart_interrupt, IRQF_DISABLED, - DRV_NAME, port); - if (ret) { - pr_err(DRV_NAME ": unable to attach Altera UART %d " - "interrupt vector=%d\n", port->line, port->irq); - return ret; - } - - spin_lock_irqsave(&port->lock, flags); - - /* Enable RX interrupts now */ - pp->imr = ALTERA_UART_CONTROL_RRDY_MSK; - writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG); - - spin_unlock_irqrestore(&port->lock, flags); - - return 0; -} - -static void altera_uart_shutdown(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - - /* Disable all interrupts now */ - pp->imr = 0; - writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG); - - spin_unlock_irqrestore(&port->lock, flags); - - if (port->irq) - free_irq(port->irq, port); - else - del_timer_sync(&pp->tmr); -} - -static const char *altera_uart_type(struct uart_port *port) -{ - return (port->type == PORT_ALTERA_UART) ? "Altera UART" : NULL; -} - -static int altera_uart_request_port(struct uart_port *port) -{ - /* UARTs always present */ - return 0; -} - -static void altera_uart_release_port(struct uart_port *port) -{ - /* Nothing to release... */ -} - -static int altera_uart_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_ALTERA_UART)) - return -EINVAL; - return 0; -} - -/* - * Define the basic serial functions we support. - */ -static struct uart_ops altera_uart_ops = { - .tx_empty = altera_uart_tx_empty, - .get_mctrl = altera_uart_get_mctrl, - .set_mctrl = altera_uart_set_mctrl, - .start_tx = altera_uart_start_tx, - .stop_tx = altera_uart_stop_tx, - .stop_rx = altera_uart_stop_rx, - .enable_ms = altera_uart_enable_ms, - .break_ctl = altera_uart_break_ctl, - .startup = altera_uart_startup, - .shutdown = altera_uart_shutdown, - .set_termios = altera_uart_set_termios, - .type = altera_uart_type, - .request_port = altera_uart_request_port, - .release_port = altera_uart_release_port, - .config_port = altera_uart_config_port, - .verify_port = altera_uart_verify_port, -}; - -static struct altera_uart altera_uart_ports[CONFIG_SERIAL_ALTERA_UART_MAXPORTS]; - -#if defined(CONFIG_SERIAL_ALTERA_UART_CONSOLE) - -int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp) -{ - struct uart_port *port; - int i; - - for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS && platp[i].mapbase; i++) { - port = &altera_uart_ports[i].port; - - port->line = i; - port->type = PORT_ALTERA_UART; - port->mapbase = platp[i].mapbase; - port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE); - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->uartclk = platp[i].uartclk; - port->flags = UPF_BOOT_AUTOCONF; - port->ops = &altera_uart_ops; - port->private_data = platp; - } - - return 0; -} - -static void altera_uart_console_putc(struct uart_port *port, const char c) -{ - while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) & - ALTERA_UART_STATUS_TRDY_MSK)) - cpu_relax(); - - writel(c, port->membase + ALTERA_UART_TXDATA_REG); -} - -static void altera_uart_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_port *port = &(altera_uart_ports + co->index)->port; - - for (; count; count--, s++) { - altera_uart_console_putc(port, *s); - if (*s == '\n') - altera_uart_console_putc(port, '\r'); - } -} - -static int __init altera_uart_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = CONFIG_SERIAL_ALTERA_UART_BAUDRATE; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS) - return -EINVAL; - port = &altera_uart_ports[co->index].port; - if (!port->membase) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver altera_uart_driver; - -static struct console altera_uart_console = { - .name = "ttyAL", - .write = altera_uart_console_write, - .device = uart_console_device, - .setup = altera_uart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &altera_uart_driver, -}; - -static int __init altera_uart_console_init(void) -{ - register_console(&altera_uart_console); - return 0; -} - -console_initcall(altera_uart_console_init); - -#define ALTERA_UART_CONSOLE (&altera_uart_console) - -#else - -#define ALTERA_UART_CONSOLE NULL - -#endif /* CONFIG_ALTERA_UART_CONSOLE */ - -/* - * Define the altera_uart UART driver structure. - */ -static struct uart_driver altera_uart_driver = { - .owner = THIS_MODULE, - .driver_name = DRV_NAME, - .dev_name = "ttyAL", - .major = SERIAL_ALTERA_MAJOR, - .minor = SERIAL_ALTERA_MINOR, - .nr = CONFIG_SERIAL_ALTERA_UART_MAXPORTS, - .cons = ALTERA_UART_CONSOLE, -}; - -static int __devinit altera_uart_probe(struct platform_device *pdev) -{ - struct altera_uart_platform_uart *platp = pdev->dev.platform_data; - struct uart_port *port; - struct resource *res_mem; - struct resource *res_irq; - int i = pdev->id; - - /* -1 emphasizes that the platform must have one port, no .N suffix */ - if (i == -1) - i = 0; - - if (i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS) - return -EINVAL; - - port = &altera_uart_ports[i].port; - - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res_mem) - port->mapbase = res_mem->start; - else if (platp->mapbase) - port->mapbase = platp->mapbase; - else - return -EINVAL; - - res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (res_irq) - port->irq = res_irq->start; - else if (platp->irq) - port->irq = platp->irq; - - port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE); - if (!port->membase) - return -ENOMEM; - - port->line = i; - port->type = PORT_ALTERA_UART; - port->iotype = SERIAL_IO_MEM; - port->uartclk = platp->uartclk; - port->ops = &altera_uart_ops; - port->flags = UPF_BOOT_AUTOCONF; - port->private_data = platp; - - uart_add_one_port(&altera_uart_driver, port); - - return 0; -} - -static int __devexit altera_uart_remove(struct platform_device *pdev) -{ - struct uart_port *port = &altera_uart_ports[pdev->id].port; - - uart_remove_one_port(&altera_uart_driver, port); - return 0; -} - -static struct platform_driver altera_uart_platform_driver = { - .probe = altera_uart_probe, - .remove = __devexit_p(altera_uart_remove), - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - .pm = NULL, - }, -}; - -static int __init altera_uart_init(void) -{ - int rc; - - rc = uart_register_driver(&altera_uart_driver); - if (rc) - return rc; - rc = platform_driver_register(&altera_uart_platform_driver); - if (rc) { - uart_unregister_driver(&altera_uart_driver); - return rc; - } - return 0; -} - -static void __exit altera_uart_exit(void) -{ - platform_driver_unregister(&altera_uart_platform_driver); - uart_unregister_driver(&altera_uart_driver); -} - -module_init(altera_uart_init); -module_exit(altera_uart_exit); - -MODULE_DESCRIPTION("Altera UART driver"); -MODULE_AUTHOR("Thomas Chou "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRV_NAME); -MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_ALTERA_MAJOR); diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c deleted file mode 100644 index 2904aa044126..000000000000 --- a/drivers/serial/amba-pl010.c +++ /dev/null @@ -1,825 +0,0 @@ -/* - * linux/drivers/char/amba.c - * - * Driver for AMBA serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * This is a generic driver for ARM AMBA-type serial ports. They - * have a lot of 16550-like features, but are not register compatible. - * Note that although they do have CTS, DCD and DSR inputs, they do - * not have an RI input, nor do they have DTR or RTS outputs. If - * required, these have to be supplied via some other means (eg, GPIO) - * and hooked into this driver. - */ - -#if defined(CONFIG_SERIAL_AMBA_PL010_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define UART_NR 8 - -#define SERIAL_AMBA_MAJOR 204 -#define SERIAL_AMBA_MINOR 16 -#define SERIAL_AMBA_NR UART_NR - -#define AMBA_ISR_PASS_LIMIT 256 - -#define UART_RX_DATA(s) (((s) & UART01x_FR_RXFE) == 0) -#define UART_TX_READY(s) (((s) & UART01x_FR_TXFF) == 0) - -#define UART_DUMMY_RSR_RX 256 -#define UART_PORT_SIZE 64 - -/* - * We wrap our port structure around the generic uart_port. - */ -struct uart_amba_port { - struct uart_port port; - struct clk *clk; - struct amba_device *dev; - struct amba_pl010_data *data; - unsigned int old_status; -}; - -static void pl010_stop_tx(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - - cr = readb(uap->port.membase + UART010_CR); - cr &= ~UART010_CR_TIE; - writel(cr, uap->port.membase + UART010_CR); -} - -static void pl010_start_tx(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - - cr = readb(uap->port.membase + UART010_CR); - cr |= UART010_CR_TIE; - writel(cr, uap->port.membase + UART010_CR); -} - -static void pl010_stop_rx(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - - cr = readb(uap->port.membase + UART010_CR); - cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); - writel(cr, uap->port.membase + UART010_CR); -} - -static void pl010_enable_ms(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - - cr = readb(uap->port.membase + UART010_CR); - cr |= UART010_CR_MSIE; - writel(cr, uap->port.membase + UART010_CR); -} - -static void pl010_rx_chars(struct uart_amba_port *uap) -{ - struct tty_struct *tty = uap->port.state->port.tty; - unsigned int status, ch, flag, rsr, max_count = 256; - - status = readb(uap->port.membase + UART01x_FR); - while (UART_RX_DATA(status) && max_count--) { - ch = readb(uap->port.membase + UART01x_DR); - flag = TTY_NORMAL; - - uap->port.icount.rx++; - - /* - * Note that the error handling code is - * out of the main execution path - */ - rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; - if (unlikely(rsr & UART01x_RSR_ANY)) { - writel(0, uap->port.membase + UART01x_ECR); - - if (rsr & UART01x_RSR_BE) { - rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); - uap->port.icount.brk++; - if (uart_handle_break(&uap->port)) - goto ignore_char; - } else if (rsr & UART01x_RSR_PE) - uap->port.icount.parity++; - else if (rsr & UART01x_RSR_FE) - uap->port.icount.frame++; - if (rsr & UART01x_RSR_OE) - uap->port.icount.overrun++; - - rsr &= uap->port.read_status_mask; - - if (rsr & UART01x_RSR_BE) - flag = TTY_BREAK; - else if (rsr & UART01x_RSR_PE) - flag = TTY_PARITY; - else if (rsr & UART01x_RSR_FE) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(&uap->port, ch)) - goto ignore_char; - - uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); - - ignore_char: - status = readb(uap->port.membase + UART01x_FR); - } - spin_unlock(&uap->port.lock); - tty_flip_buffer_push(tty); - spin_lock(&uap->port.lock); -} - -static void pl010_tx_chars(struct uart_amba_port *uap) -{ - struct circ_buf *xmit = &uap->port.state->xmit; - int count; - - if (uap->port.x_char) { - writel(uap->port.x_char, uap->port.membase + UART01x_DR); - uap->port.icount.tx++; - uap->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) { - pl010_stop_tx(&uap->port); - return; - } - - count = uap->port.fifosize >> 1; - do { - writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - uap->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uap->port); - - if (uart_circ_empty(xmit)) - pl010_stop_tx(&uap->port); -} - -static void pl010_modem_status(struct uart_amba_port *uap) -{ - unsigned int status, delta; - - writel(0, uap->port.membase + UART010_ICR); - - status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; - - delta = status ^ uap->old_status; - uap->old_status = status; - - if (!delta) - return; - - if (delta & UART01x_FR_DCD) - uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); - - if (delta & UART01x_FR_DSR) - uap->port.icount.dsr++; - - if (delta & UART01x_FR_CTS) - uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); - - wake_up_interruptible(&uap->port.state->port.delta_msr_wait); -} - -static irqreturn_t pl010_int(int irq, void *dev_id) -{ - struct uart_amba_port *uap = dev_id; - unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT; - int handled = 0; - - spin_lock(&uap->port.lock); - - status = readb(uap->port.membase + UART010_IIR); - if (status) { - do { - if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) - pl010_rx_chars(uap); - if (status & UART010_IIR_MIS) - pl010_modem_status(uap); - if (status & UART010_IIR_TIS) - pl010_tx_chars(uap); - - if (pass_counter-- == 0) - break; - - status = readb(uap->port.membase + UART010_IIR); - } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | - UART010_IIR_TIS)); - handled = 1; - } - - spin_unlock(&uap->port.lock); - - return IRQ_RETVAL(handled); -} - -static unsigned int pl010_tx_empty(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int status = readb(uap->port.membase + UART01x_FR); - return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; -} - -static unsigned int pl010_get_mctrl(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int result = 0; - unsigned int status; - - status = readb(uap->port.membase + UART01x_FR); - if (status & UART01x_FR_DCD) - result |= TIOCM_CAR; - if (status & UART01x_FR_DSR) - result |= TIOCM_DSR; - if (status & UART01x_FR_CTS) - result |= TIOCM_CTS; - - return result; -} - -static void pl010_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - if (uap->data) - uap->data->set_mctrl(uap->dev, uap->port.membase, mctrl); -} - -static void pl010_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned long flags; - unsigned int lcr_h; - - spin_lock_irqsave(&uap->port.lock, flags); - lcr_h = readb(uap->port.membase + UART010_LCRH); - if (break_state == -1) - lcr_h |= UART01x_LCRH_BRK; - else - lcr_h &= ~UART01x_LCRH_BRK; - writel(lcr_h, uap->port.membase + UART010_LCRH); - spin_unlock_irqrestore(&uap->port.lock, flags); -} - -static int pl010_startup(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - int retval; - - /* - * Try to enable the clock producer. - */ - retval = clk_enable(uap->clk); - if (retval) - goto out; - - uap->port.uartclk = clk_get_rate(uap->clk); - - /* - * Allocate the IRQ - */ - retval = request_irq(uap->port.irq, pl010_int, 0, "uart-pl010", uap); - if (retval) - goto clk_dis; - - /* - * initialise the old status of the modem signals - */ - uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; - - /* - * Finally, enable interrupts - */ - writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, - uap->port.membase + UART010_CR); - - return 0; - - clk_dis: - clk_disable(uap->clk); - out: - return retval; -} - -static void pl010_shutdown(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - /* - * Free the interrupt - */ - free_irq(uap->port.irq, uap); - - /* - * disable all interrupts, disable the port - */ - writel(0, uap->port.membase + UART010_CR); - - /* disable break condition and fifos */ - writel(readb(uap->port.membase + UART010_LCRH) & - ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), - uap->port.membase + UART010_LCRH); - - /* - * Shut down the clock producer - */ - clk_disable(uap->clk); -} - -static void -pl010_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int lcr_h, old_cr; - unsigned long flags; - unsigned int baud, quot; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); - quot = uart_get_divisor(port, baud); - - switch (termios->c_cflag & CSIZE) { - case CS5: - lcr_h = UART01x_LCRH_WLEN_5; - break; - case CS6: - lcr_h = UART01x_LCRH_WLEN_6; - break; - case CS7: - lcr_h = UART01x_LCRH_WLEN_7; - break; - default: // CS8 - lcr_h = UART01x_LCRH_WLEN_8; - break; - } - if (termios->c_cflag & CSTOPB) - lcr_h |= UART01x_LCRH_STP2; - if (termios->c_cflag & PARENB) { - lcr_h |= UART01x_LCRH_PEN; - if (!(termios->c_cflag & PARODD)) - lcr_h |= UART01x_LCRH_EPS; - } - if (uap->port.fifosize > 1) - lcr_h |= UART01x_LCRH_FEN; - - spin_lock_irqsave(&uap->port.lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - uap->port.read_status_mask = UART01x_RSR_OE; - if (termios->c_iflag & INPCK) - uap->port.read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; - if (termios->c_iflag & (BRKINT | PARMRK)) - uap->port.read_status_mask |= UART01x_RSR_BE; - - /* - * Characters to ignore - */ - uap->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - uap->port.ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; - if (termios->c_iflag & IGNBRK) { - uap->port.ignore_status_mask |= UART01x_RSR_BE; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - uap->port.ignore_status_mask |= UART01x_RSR_OE; - } - - /* - * Ignore all characters if CREAD is not set. - */ - if ((termios->c_cflag & CREAD) == 0) - uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; - - /* first, disable everything */ - old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; - - if (UART_ENABLE_MS(port, termios->c_cflag)) - old_cr |= UART010_CR_MSIE; - - writel(0, uap->port.membase + UART010_CR); - - /* Set baud rate */ - quot -= 1; - writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); - writel(quot & 0xff, uap->port.membase + UART010_LCRL); - - /* - * ----------v----------v----------v----------v----- - * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L - * ----------^----------^----------^----------^----- - */ - writel(lcr_h, uap->port.membase + UART010_LCRH); - writel(old_cr, uap->port.membase + UART010_CR); - - spin_unlock_irqrestore(&uap->port.lock, flags); -} - -static void pl010_set_ldisc(struct uart_port *port, int new) -{ - if (new == N_PPS) { - port->flags |= UPF_HARDPPS_CD; - pl010_enable_ms(port); - } else - port->flags &= ~UPF_HARDPPS_CD; -} - -static const char *pl010_type(struct uart_port *port) -{ - return port->type == PORT_AMBA ? "AMBA" : NULL; -} - -/* - * Release the memory region(s) being used by 'port' - */ -static void pl010_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, UART_PORT_SIZE); -} - -/* - * Request the memory region(s) being used by 'port' - */ -static int pl010_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, UART_PORT_SIZE, "uart-pl010") - != NULL ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void pl010_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_AMBA; - pl010_request_port(port); - } -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= nr_irqs) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -static struct uart_ops amba_pl010_pops = { - .tx_empty = pl010_tx_empty, - .set_mctrl = pl010_set_mctrl, - .get_mctrl = pl010_get_mctrl, - .stop_tx = pl010_stop_tx, - .start_tx = pl010_start_tx, - .stop_rx = pl010_stop_rx, - .enable_ms = pl010_enable_ms, - .break_ctl = pl010_break_ctl, - .startup = pl010_startup, - .shutdown = pl010_shutdown, - .set_termios = pl010_set_termios, - .set_ldisc = pl010_set_ldisc, - .type = pl010_type, - .release_port = pl010_release_port, - .request_port = pl010_request_port, - .config_port = pl010_config_port, - .verify_port = pl010_verify_port, -}; - -static struct uart_amba_port *amba_ports[UART_NR]; - -#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE - -static void pl010_console_putchar(struct uart_port *port, int ch) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int status; - - do { - status = readb(uap->port.membase + UART01x_FR); - barrier(); - } while (!UART_TX_READY(status)); - writel(ch, uap->port.membase + UART01x_DR); -} - -static void -pl010_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_amba_port *uap = amba_ports[co->index]; - unsigned int status, old_cr; - - clk_enable(uap->clk); - - /* - * First save the CR then disable the interrupts - */ - old_cr = readb(uap->port.membase + UART010_CR); - writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); - - uart_console_write(&uap->port, s, count, pl010_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the TCR - */ - do { - status = readb(uap->port.membase + UART01x_FR); - barrier(); - } while (status & UART01x_FR_BUSY); - writel(old_cr, uap->port.membase + UART010_CR); - - clk_disable(uap->clk); -} - -static void __init -pl010_console_get_options(struct uart_amba_port *uap, int *baud, - int *parity, int *bits) -{ - if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { - unsigned int lcr_h, quot; - lcr_h = readb(uap->port.membase + UART010_LCRH); - - *parity = 'n'; - if (lcr_h & UART01x_LCRH_PEN) { - if (lcr_h & UART01x_LCRH_EPS) - *parity = 'e'; - else - *parity = 'o'; - } - - if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) - *bits = 7; - else - *bits = 8; - - quot = readb(uap->port.membase + UART010_LCRL) | - readb(uap->port.membase + UART010_LCRM) << 8; - *baud = uap->port.uartclk / (16 * (quot + 1)); - } -} - -static int __init pl010_console_setup(struct console *co, char *options) -{ - struct uart_amba_port *uap; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= UART_NR) - co->index = 0; - uap = amba_ports[co->index]; - if (!uap) - return -ENODEV; - - uap->port.uartclk = clk_get_rate(uap->clk); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - pl010_console_get_options(uap, &baud, &parity, &bits); - - return uart_set_options(&uap->port, co, baud, parity, bits, flow); -} - -static struct uart_driver amba_reg; -static struct console amba_console = { - .name = "ttyAM", - .write = pl010_console_write, - .device = uart_console_device, - .setup = pl010_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &amba_reg, -}; - -#define AMBA_CONSOLE &amba_console -#else -#define AMBA_CONSOLE NULL -#endif - -static struct uart_driver amba_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyAM", - .dev_name = "ttyAM", - .major = SERIAL_AMBA_MAJOR, - .minor = SERIAL_AMBA_MINOR, - .nr = UART_NR, - .cons = AMBA_CONSOLE, -}; - -static int pl010_probe(struct amba_device *dev, struct amba_id *id) -{ - struct uart_amba_port *uap; - void __iomem *base; - int i, ret; - - for (i = 0; i < ARRAY_SIZE(amba_ports); i++) - if (amba_ports[i] == NULL) - break; - - if (i == ARRAY_SIZE(amba_ports)) { - ret = -EBUSY; - goto out; - } - - uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL); - if (!uap) { - ret = -ENOMEM; - goto out; - } - - base = ioremap(dev->res.start, resource_size(&dev->res)); - if (!base) { - ret = -ENOMEM; - goto free; - } - - uap->clk = clk_get(&dev->dev, NULL); - if (IS_ERR(uap->clk)) { - ret = PTR_ERR(uap->clk); - goto unmap; - } - - uap->port.dev = &dev->dev; - uap->port.mapbase = dev->res.start; - uap->port.membase = base; - uap->port.iotype = UPIO_MEM; - uap->port.irq = dev->irq[0]; - uap->port.fifosize = 16; - uap->port.ops = &amba_pl010_pops; - uap->port.flags = UPF_BOOT_AUTOCONF; - uap->port.line = i; - uap->dev = dev; - uap->data = dev->dev.platform_data; - - amba_ports[i] = uap; - - amba_set_drvdata(dev, uap); - ret = uart_add_one_port(&amba_reg, &uap->port); - if (ret) { - amba_set_drvdata(dev, NULL); - amba_ports[i] = NULL; - clk_put(uap->clk); - unmap: - iounmap(base); - free: - kfree(uap); - } - out: - return ret; -} - -static int pl010_remove(struct amba_device *dev) -{ - struct uart_amba_port *uap = amba_get_drvdata(dev); - int i; - - amba_set_drvdata(dev, NULL); - - uart_remove_one_port(&amba_reg, &uap->port); - - for (i = 0; i < ARRAY_SIZE(amba_ports); i++) - if (amba_ports[i] == uap) - amba_ports[i] = NULL; - - iounmap(uap->port.membase); - clk_put(uap->clk); - kfree(uap); - return 0; -} - -static int pl010_suspend(struct amba_device *dev, pm_message_t state) -{ - struct uart_amba_port *uap = amba_get_drvdata(dev); - - if (uap) - uart_suspend_port(&amba_reg, &uap->port); - - return 0; -} - -static int pl010_resume(struct amba_device *dev) -{ - struct uart_amba_port *uap = amba_get_drvdata(dev); - - if (uap) - uart_resume_port(&amba_reg, &uap->port); - - return 0; -} - -static struct amba_id pl010_ids[] = { - { - .id = 0x00041010, - .mask = 0x000fffff, - }, - { 0, 0 }, -}; - -static struct amba_driver pl010_driver = { - .drv = { - .name = "uart-pl010", - }, - .id_table = pl010_ids, - .probe = pl010_probe, - .remove = pl010_remove, - .suspend = pl010_suspend, - .resume = pl010_resume, -}; - -static int __init pl010_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: AMBA driver\n"); - - ret = uart_register_driver(&amba_reg); - if (ret == 0) { - ret = amba_driver_register(&pl010_driver); - if (ret) - uart_unregister_driver(&amba_reg); - } - return ret; -} - -static void __exit pl010_exit(void) -{ - amba_driver_unregister(&pl010_driver); - uart_unregister_driver(&amba_reg); -} - -module_init(pl010_init); -module_exit(pl010_exit); - -MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd"); -MODULE_DESCRIPTION("ARM AMBA serial port driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c deleted file mode 100644 index e76d7d000128..000000000000 --- a/drivers/serial/amba-pl011.c +++ /dev/null @@ -1,1519 +0,0 @@ -/* - * linux/drivers/char/amba.c - * - * Driver for AMBA serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * Copyright (C) 2010 ST-Ericsson SA - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * This is a generic driver for ARM AMBA-type serial ports. They - * have a lot of 16550-like features, but are not register compatible. - * Note that although they do have CTS, DCD and DSR inputs, they do - * not have an RI input, nor do they have DTR or RTS outputs. If - * required, these have to be supplied via some other means (eg, GPIO) - * and hooked into this driver. - */ - -#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define UART_NR 14 - -#define SERIAL_AMBA_MAJOR 204 -#define SERIAL_AMBA_MINOR 64 -#define SERIAL_AMBA_NR UART_NR - -#define AMBA_ISR_PASS_LIMIT 256 - -#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) -#define UART_DUMMY_DR_RX (1 << 16) - -/* There is by now at least one vendor with differing details, so handle it */ -struct vendor_data { - unsigned int ifls; - unsigned int fifosize; - unsigned int lcrh_tx; - unsigned int lcrh_rx; - bool oversampling; - bool dma_threshold; -}; - -static struct vendor_data vendor_arm = { - .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, - .fifosize = 16, - .lcrh_tx = UART011_LCRH, - .lcrh_rx = UART011_LCRH, - .oversampling = false, - .dma_threshold = false, -}; - -static struct vendor_data vendor_st = { - .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, - .fifosize = 64, - .lcrh_tx = ST_UART011_LCRH_TX, - .lcrh_rx = ST_UART011_LCRH_RX, - .oversampling = true, - .dma_threshold = true, -}; - -/* Deals with DMA transactions */ -struct pl011_dmatx_data { - struct dma_chan *chan; - struct scatterlist sg; - char *buf; - bool queued; -}; - -/* - * We wrap our port structure around the generic uart_port. - */ -struct uart_amba_port { - struct uart_port port; - struct clk *clk; - const struct vendor_data *vendor; - unsigned int dmacr; /* dma control reg */ - unsigned int im; /* interrupt mask */ - unsigned int old_status; - unsigned int fifosize; /* vendor-specific */ - unsigned int lcrh_tx; /* vendor-specific */ - unsigned int lcrh_rx; /* vendor-specific */ - bool autorts; - char type[12]; -#ifdef CONFIG_DMA_ENGINE - /* DMA stuff */ - bool using_dma; - struct pl011_dmatx_data dmatx; -#endif -}; - -/* - * All the DMA operation mode stuff goes inside this ifdef. - * This assumes that you have a generic DMA device interface, - * no custom DMA interfaces are supported. - */ -#ifdef CONFIG_DMA_ENGINE - -#define PL011_DMA_BUFFER_SIZE PAGE_SIZE - -static void pl011_dma_probe_initcall(struct uart_amba_port *uap) -{ - /* DMA is the sole user of the platform data right now */ - struct amba_pl011_data *plat = uap->port.dev->platform_data; - struct dma_slave_config tx_conf = { - .dst_addr = uap->port.mapbase + UART01x_DR, - .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, - .direction = DMA_TO_DEVICE, - .dst_maxburst = uap->fifosize >> 1, - }; - struct dma_chan *chan; - dma_cap_mask_t mask; - - /* We need platform data */ - if (!plat || !plat->dma_filter) { - dev_info(uap->port.dev, "no DMA platform data\n"); - return; - } - - /* Try to acquire a generic DMA engine slave channel */ - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - chan = dma_request_channel(mask, plat->dma_filter, plat->dma_tx_param); - if (!chan) { - dev_err(uap->port.dev, "no TX DMA channel!\n"); - return; - } - - dmaengine_slave_config(chan, &tx_conf); - uap->dmatx.chan = chan; - - dev_info(uap->port.dev, "DMA channel TX %s\n", - dma_chan_name(uap->dmatx.chan)); -} - -#ifndef MODULE -/* - * Stack up the UARTs and let the above initcall be done at device - * initcall time, because the serial driver is called as an arch - * initcall, and at this time the DMA subsystem is not yet registered. - * At this point the driver will switch over to using DMA where desired. - */ -struct dma_uap { - struct list_head node; - struct uart_amba_port *uap; -}; - -static LIST_HEAD(pl011_dma_uarts); - -static int __init pl011_dma_initcall(void) -{ - struct list_head *node, *tmp; - - list_for_each_safe(node, tmp, &pl011_dma_uarts) { - struct dma_uap *dmau = list_entry(node, struct dma_uap, node); - pl011_dma_probe_initcall(dmau->uap); - list_del(node); - kfree(dmau); - } - return 0; -} - -device_initcall(pl011_dma_initcall); - -static void pl011_dma_probe(struct uart_amba_port *uap) -{ - struct dma_uap *dmau = kzalloc(sizeof(struct dma_uap), GFP_KERNEL); - if (dmau) { - dmau->uap = uap; - list_add_tail(&dmau->node, &pl011_dma_uarts); - } -} -#else -static void pl011_dma_probe(struct uart_amba_port *uap) -{ - pl011_dma_probe_initcall(uap); -} -#endif - -static void pl011_dma_remove(struct uart_amba_port *uap) -{ - /* TODO: remove the initcall if it has not yet executed */ - if (uap->dmatx.chan) - dma_release_channel(uap->dmatx.chan); -} - - -/* Forward declare this for the refill routine */ -static int pl011_dma_tx_refill(struct uart_amba_port *uap); - -/* - * The current DMA TX buffer has been sent. - * Try to queue up another DMA buffer. - */ -static void pl011_dma_tx_callback(void *data) -{ - struct uart_amba_port *uap = data; - struct pl011_dmatx_data *dmatx = &uap->dmatx; - unsigned long flags; - u16 dmacr; - - spin_lock_irqsave(&uap->port.lock, flags); - if (uap->dmatx.queued) - dma_unmap_sg(dmatx->chan->device->dev, &dmatx->sg, 1, - DMA_TO_DEVICE); - - dmacr = uap->dmacr; - uap->dmacr = dmacr & ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); - - /* - * If TX DMA was disabled, it means that we've stopped the DMA for - * some reason (eg, XOFF received, or we want to send an X-char.) - * - * Note: we need to be careful here of a potential race between DMA - * and the rest of the driver - if the driver disables TX DMA while - * a TX buffer completing, we must update the tx queued status to - * get further refills (hence we check dmacr). - */ - if (!(dmacr & UART011_TXDMAE) || uart_tx_stopped(&uap->port) || - uart_circ_empty(&uap->port.state->xmit)) { - uap->dmatx.queued = false; - spin_unlock_irqrestore(&uap->port.lock, flags); - return; - } - - if (pl011_dma_tx_refill(uap) <= 0) { - /* - * We didn't queue a DMA buffer for some reason, but we - * have data pending to be sent. Re-enable the TX IRQ. - */ - uap->im |= UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); - } - spin_unlock_irqrestore(&uap->port.lock, flags); -} - -/* - * Try to refill the TX DMA buffer. - * Locking: called with port lock held and IRQs disabled. - * Returns: - * 1 if we queued up a TX DMA buffer. - * 0 if we didn't want to handle this by DMA - * <0 on error - */ -static int pl011_dma_tx_refill(struct uart_amba_port *uap) -{ - struct pl011_dmatx_data *dmatx = &uap->dmatx; - struct dma_chan *chan = dmatx->chan; - struct dma_device *dma_dev = chan->device; - struct dma_async_tx_descriptor *desc; - struct circ_buf *xmit = &uap->port.state->xmit; - unsigned int count; - - /* - * Try to avoid the overhead involved in using DMA if the - * transaction fits in the first half of the FIFO, by using - * the standard interrupt handling. This ensures that we - * issue a uart_write_wakeup() at the appropriate time. - */ - count = uart_circ_chars_pending(xmit); - if (count < (uap->fifosize >> 1)) { - uap->dmatx.queued = false; - return 0; - } - - /* - * Bodge: don't send the last character by DMA, as this - * will prevent XON from notifying us to restart DMA. - */ - count -= 1; - - /* Else proceed to copy the TX chars to the DMA buffer and fire DMA */ - if (count > PL011_DMA_BUFFER_SIZE) - count = PL011_DMA_BUFFER_SIZE; - - if (xmit->tail < xmit->head) - memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], count); - else { - size_t first = UART_XMIT_SIZE - xmit->tail; - size_t second = xmit->head; - - memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], first); - if (second) - memcpy(&dmatx->buf[first], &xmit->buf[0], second); - } - - dmatx->sg.length = count; - - if (dma_map_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE) != 1) { - uap->dmatx.queued = false; - dev_dbg(uap->port.dev, "unable to map TX DMA\n"); - return -EBUSY; - } - - desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_TO_DEVICE, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE); - uap->dmatx.queued = false; - /* - * If DMA cannot be used right now, we complete this - * transaction via IRQ and let the TTY layer retry. - */ - dev_dbg(uap->port.dev, "TX DMA busy\n"); - return -EBUSY; - } - - /* Some data to go along to the callback */ - desc->callback = pl011_dma_tx_callback; - desc->callback_param = uap; - - /* All errors should happen at prepare time */ - dmaengine_submit(desc); - - /* Fire the DMA transaction */ - dma_dev->device_issue_pending(chan); - - uap->dmacr |= UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); - uap->dmatx.queued = true; - - /* - * Now we know that DMA will fire, so advance the ring buffer - * with the stuff we just dispatched. - */ - xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); - uap->port.icount.tx += count; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uap->port); - - return 1; -} - -/* - * We received a transmit interrupt without a pending X-char but with - * pending characters. - * Locking: called with port lock held and IRQs disabled. - * Returns: - * false if we want to use PIO to transmit - * true if we queued a DMA buffer - */ -static bool pl011_dma_tx_irq(struct uart_amba_port *uap) -{ - if (!uap->using_dma) - return false; - - /* - * If we already have a TX buffer queued, but received a - * TX interrupt, it will be because we've just sent an X-char. - * Ensure the TX DMA is enabled and the TX IRQ is disabled. - */ - if (uap->dmatx.queued) { - uap->dmacr |= UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); - uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); - return true; - } - - /* - * We don't have a TX buffer queued, so try to queue one. - * If we succesfully queued a buffer, mask the TX IRQ. - */ - if (pl011_dma_tx_refill(uap) > 0) { - uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); - return true; - } - return false; -} - -/* - * Stop the DMA transmit (eg, due to received XOFF). - * Locking: called with port lock held and IRQs disabled. - */ -static inline void pl011_dma_tx_stop(struct uart_amba_port *uap) -{ - if (uap->dmatx.queued) { - uap->dmacr &= ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); - } -} - -/* - * Try to start a DMA transmit, or in the case of an XON/OFF - * character queued for send, try to get that character out ASAP. - * Locking: called with port lock held and IRQs disabled. - * Returns: - * false if we want the TX IRQ to be enabled - * true if we have a buffer queued - */ -static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) -{ - u16 dmacr; - - if (!uap->using_dma) - return false; - - if (!uap->port.x_char) { - /* no X-char, try to push chars out in DMA mode */ - bool ret = true; - - if (!uap->dmatx.queued) { - if (pl011_dma_tx_refill(uap) > 0) { - uap->im &= ~UART011_TXIM; - ret = true; - } else { - uap->im |= UART011_TXIM; - ret = false; - } - writew(uap->im, uap->port.membase + UART011_IMSC); - } else if (!(uap->dmacr & UART011_TXDMAE)) { - uap->dmacr |= UART011_TXDMAE; - writew(uap->dmacr, - uap->port.membase + UART011_DMACR); - } - return ret; - } - - /* - * We have an X-char to send. Disable DMA to prevent it loading - * the TX fifo, and then see if we can stuff it into the FIFO. - */ - dmacr = uap->dmacr; - uap->dmacr &= ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); - - if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) { - /* - * No space in the FIFO, so enable the transmit interrupt - * so we know when there is space. Note that once we've - * loaded the character, we should just re-enable DMA. - */ - return false; - } - - writew(uap->port.x_char, uap->port.membase + UART01x_DR); - uap->port.icount.tx++; - uap->port.x_char = 0; - - /* Success - restore the DMA state */ - uap->dmacr = dmacr; - writew(dmacr, uap->port.membase + UART011_DMACR); - - return true; -} - -/* - * Flush the transmit buffer. - * Locking: called with port lock held and IRQs disabled. - */ -static void pl011_dma_flush_buffer(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - if (!uap->using_dma) - return; - - /* Avoid deadlock with the DMA engine callback */ - spin_unlock(&uap->port.lock); - dmaengine_terminate_all(uap->dmatx.chan); - spin_lock(&uap->port.lock); - if (uap->dmatx.queued) { - dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1, - DMA_TO_DEVICE); - uap->dmatx.queued = false; - uap->dmacr &= ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); - } -} - - -static void pl011_dma_startup(struct uart_amba_port *uap) -{ - if (!uap->dmatx.chan) - return; - - uap->dmatx.buf = kmalloc(PL011_DMA_BUFFER_SIZE, GFP_KERNEL); - if (!uap->dmatx.buf) { - dev_err(uap->port.dev, "no memory for DMA TX buffer\n"); - uap->port.fifosize = uap->fifosize; - return; - } - - sg_init_one(&uap->dmatx.sg, uap->dmatx.buf, PL011_DMA_BUFFER_SIZE); - - /* The DMA buffer is now the FIFO the TTY subsystem can use */ - uap->port.fifosize = PL011_DMA_BUFFER_SIZE; - uap->using_dma = true; - - /* Turn on DMA error (RX/TX will be enabled on demand) */ - uap->dmacr |= UART011_DMAONERR; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); - - /* - * ST Micro variants has some specific dma burst threshold - * compensation. Set this to 16 bytes, so burst will only - * be issued above/below 16 bytes. - */ - if (uap->vendor->dma_threshold) - writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16, - uap->port.membase + ST_UART011_DMAWM); -} - -static void pl011_dma_shutdown(struct uart_amba_port *uap) -{ - if (!uap->using_dma) - return; - - /* Disable RX and TX DMA */ - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) - barrier(); - - spin_lock_irq(&uap->port.lock); - uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE); - writew(uap->dmacr, uap->port.membase + UART011_DMACR); - spin_unlock_irq(&uap->port.lock); - - /* In theory, this should already be done by pl011_dma_flush_buffer */ - dmaengine_terminate_all(uap->dmatx.chan); - if (uap->dmatx.queued) { - dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1, - DMA_TO_DEVICE); - uap->dmatx.queued = false; - } - - kfree(uap->dmatx.buf); - - uap->using_dma = false; -} - -#else -/* Blank functions if the DMA engine is not available */ -static inline void pl011_dma_probe(struct uart_amba_port *uap) -{ -} - -static inline void pl011_dma_remove(struct uart_amba_port *uap) -{ -} - -static inline void pl011_dma_startup(struct uart_amba_port *uap) -{ -} - -static inline void pl011_dma_shutdown(struct uart_amba_port *uap) -{ -} - -static inline bool pl011_dma_tx_irq(struct uart_amba_port *uap) -{ - return false; -} - -static inline void pl011_dma_tx_stop(struct uart_amba_port *uap) -{ -} - -static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) -{ - return false; -} - -#define pl011_dma_flush_buffer NULL -#endif - - -static void pl011_stop_tx(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); - pl011_dma_tx_stop(uap); -} - -static void pl011_start_tx(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - if (!pl011_dma_tx_start(uap)) { - uap->im |= UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); - } -} - -static void pl011_stop_rx(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM| - UART011_PEIM|UART011_BEIM|UART011_OEIM); - writew(uap->im, uap->port.membase + UART011_IMSC); -} - -static void pl011_enable_ms(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM; - writew(uap->im, uap->port.membase + UART011_IMSC); -} - -static void pl011_rx_chars(struct uart_amba_port *uap) -{ - struct tty_struct *tty = uap->port.state->port.tty; - unsigned int status, ch, flag, max_count = 256; - - status = readw(uap->port.membase + UART01x_FR); - while ((status & UART01x_FR_RXFE) == 0 && max_count--) { - ch = readw(uap->port.membase + UART01x_DR) | UART_DUMMY_DR_RX; - flag = TTY_NORMAL; - uap->port.icount.rx++; - - /* - * Note that the error handling code is - * out of the main execution path - */ - if (unlikely(ch & UART_DR_ERROR)) { - if (ch & UART011_DR_BE) { - ch &= ~(UART011_DR_FE | UART011_DR_PE); - uap->port.icount.brk++; - if (uart_handle_break(&uap->port)) - goto ignore_char; - } else if (ch & UART011_DR_PE) - uap->port.icount.parity++; - else if (ch & UART011_DR_FE) - uap->port.icount.frame++; - if (ch & UART011_DR_OE) - uap->port.icount.overrun++; - - ch &= uap->port.read_status_mask; - - if (ch & UART011_DR_BE) - flag = TTY_BREAK; - else if (ch & UART011_DR_PE) - flag = TTY_PARITY; - else if (ch & UART011_DR_FE) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(&uap->port, ch & 255)) - goto ignore_char; - - uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag); - - ignore_char: - status = readw(uap->port.membase + UART01x_FR); - } - spin_unlock(&uap->port.lock); - tty_flip_buffer_push(tty); - spin_lock(&uap->port.lock); -} - -static void pl011_tx_chars(struct uart_amba_port *uap) -{ - struct circ_buf *xmit = &uap->port.state->xmit; - int count; - - if (uap->port.x_char) { - writew(uap->port.x_char, uap->port.membase + UART01x_DR); - uap->port.icount.tx++; - uap->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) { - pl011_stop_tx(&uap->port); - return; - } - - /* If we are using DMA mode, try to send some characters. */ - if (pl011_dma_tx_irq(uap)) - return; - - count = uap->fifosize >> 1; - do { - writew(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - uap->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uap->port); - - if (uart_circ_empty(xmit)) - pl011_stop_tx(&uap->port); -} - -static void pl011_modem_status(struct uart_amba_port *uap) -{ - unsigned int status, delta; - - status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; - - delta = status ^ uap->old_status; - uap->old_status = status; - - if (!delta) - return; - - if (delta & UART01x_FR_DCD) - uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); - - if (delta & UART01x_FR_DSR) - uap->port.icount.dsr++; - - if (delta & UART01x_FR_CTS) - uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); - - wake_up_interruptible(&uap->port.state->port.delta_msr_wait); -} - -static irqreturn_t pl011_int(int irq, void *dev_id) -{ - struct uart_amba_port *uap = dev_id; - unsigned long flags; - unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT; - int handled = 0; - - spin_lock_irqsave(&uap->port.lock, flags); - - status = readw(uap->port.membase + UART011_MIS); - if (status) { - do { - writew(status & ~(UART011_TXIS|UART011_RTIS| - UART011_RXIS), - uap->port.membase + UART011_ICR); - - if (status & (UART011_RTIS|UART011_RXIS)) - pl011_rx_chars(uap); - if (status & (UART011_DSRMIS|UART011_DCDMIS| - UART011_CTSMIS|UART011_RIMIS)) - pl011_modem_status(uap); - if (status & UART011_TXIS) - pl011_tx_chars(uap); - - if (pass_counter-- == 0) - break; - - status = readw(uap->port.membase + UART011_MIS); - } while (status != 0); - handled = 1; - } - - spin_unlock_irqrestore(&uap->port.lock, flags); - - return IRQ_RETVAL(handled); -} - -static unsigned int pl01x_tx_empty(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int status = readw(uap->port.membase + UART01x_FR); - return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; -} - -static unsigned int pl01x_get_mctrl(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int result = 0; - unsigned int status = readw(uap->port.membase + UART01x_FR); - -#define TIOCMBIT(uartbit, tiocmbit) \ - if (status & uartbit) \ - result |= tiocmbit - - TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR); - TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR); - TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS); - TIOCMBIT(UART011_FR_RI, TIOCM_RNG); -#undef TIOCMBIT - return result; -} - -static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - - cr = readw(uap->port.membase + UART011_CR); - -#define TIOCMBIT(tiocmbit, uartbit) \ - if (mctrl & tiocmbit) \ - cr |= uartbit; \ - else \ - cr &= ~uartbit - - TIOCMBIT(TIOCM_RTS, UART011_CR_RTS); - TIOCMBIT(TIOCM_DTR, UART011_CR_DTR); - TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1); - TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2); - TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE); - - if (uap->autorts) { - /* We need to disable auto-RTS if we want to turn RTS off */ - TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN); - } -#undef TIOCMBIT - - writew(cr, uap->port.membase + UART011_CR); -} - -static void pl011_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned long flags; - unsigned int lcr_h; - - spin_lock_irqsave(&uap->port.lock, flags); - lcr_h = readw(uap->port.membase + uap->lcrh_tx); - if (break_state == -1) - lcr_h |= UART01x_LCRH_BRK; - else - lcr_h &= ~UART01x_LCRH_BRK; - writew(lcr_h, uap->port.membase + uap->lcrh_tx); - spin_unlock_irqrestore(&uap->port.lock, flags); -} - -#ifdef CONFIG_CONSOLE_POLL -static int pl010_get_poll_char(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int status; - - status = readw(uap->port.membase + UART01x_FR); - if (status & UART01x_FR_RXFE) - return NO_POLL_CHAR; - - return readw(uap->port.membase + UART01x_DR); -} - -static void pl010_put_poll_char(struct uart_port *port, - unsigned char ch) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) - barrier(); - - writew(ch, uap->port.membase + UART01x_DR); -} - -#endif /* CONFIG_CONSOLE_POLL */ - -static int pl011_startup(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - int retval; - - /* - * Try to enable the clock producer. - */ - retval = clk_enable(uap->clk); - if (retval) - goto out; - - uap->port.uartclk = clk_get_rate(uap->clk); - - /* - * Allocate the IRQ - */ - retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap); - if (retval) - goto clk_dis; - - writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS); - - /* - * Provoke TX FIFO interrupt into asserting. - */ - cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE; - writew(cr, uap->port.membase + UART011_CR); - writew(0, uap->port.membase + UART011_FBRD); - writew(1, uap->port.membase + UART011_IBRD); - writew(0, uap->port.membase + uap->lcrh_rx); - if (uap->lcrh_tx != uap->lcrh_rx) { - int i; - /* - * Wait 10 PCLKs before writing LCRH_TX register, - * to get this delay write read only register 10 times - */ - for (i = 0; i < 10; ++i) - writew(0xff, uap->port.membase + UART011_MIS); - writew(0, uap->port.membase + uap->lcrh_tx); - } - writew(0, uap->port.membase + UART01x_DR); - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) - barrier(); - - cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; - writew(cr, uap->port.membase + UART011_CR); - - /* Clear pending error interrupts */ - writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS, - uap->port.membase + UART011_ICR); - - /* - * initialise the old status of the modem signals - */ - uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; - - /* Startup DMA */ - pl011_dma_startup(uap); - - /* - * Finally, enable interrupts - */ - spin_lock_irq(&uap->port.lock); - uap->im = UART011_RXIM | UART011_RTIM; - writew(uap->im, uap->port.membase + UART011_IMSC); - spin_unlock_irq(&uap->port.lock); - - return 0; - - clk_dis: - clk_disable(uap->clk); - out: - return retval; -} - -static void pl011_shutdown_channel(struct uart_amba_port *uap, - unsigned int lcrh) -{ - unsigned long val; - - val = readw(uap->port.membase + lcrh); - val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); - writew(val, uap->port.membase + lcrh); -} - -static void pl011_shutdown(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - /* - * disable all interrupts - */ - spin_lock_irq(&uap->port.lock); - uap->im = 0; - writew(uap->im, uap->port.membase + UART011_IMSC); - writew(0xffff, uap->port.membase + UART011_ICR); - spin_unlock_irq(&uap->port.lock); - - pl011_dma_shutdown(uap); - - /* - * Free the interrupt - */ - free_irq(uap->port.irq, uap); - - /* - * disable the port - */ - uap->autorts = false; - writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR); - - /* - * disable break condition and fifos - */ - pl011_shutdown_channel(uap, uap->lcrh_rx); - if (uap->lcrh_rx != uap->lcrh_tx) - pl011_shutdown_channel(uap, uap->lcrh_tx); - - /* - * Shut down the clock producer - */ - clk_disable(uap->clk); -} - -static void -pl011_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int lcr_h, old_cr; - unsigned long flags; - unsigned int baud, quot, clkdiv; - - if (uap->vendor->oversampling) - clkdiv = 8; - else - clkdiv = 16; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, - port->uartclk / clkdiv); - - if (baud > port->uartclk/16) - quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud); - else - quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud); - - switch (termios->c_cflag & CSIZE) { - case CS5: - lcr_h = UART01x_LCRH_WLEN_5; - break; - case CS6: - lcr_h = UART01x_LCRH_WLEN_6; - break; - case CS7: - lcr_h = UART01x_LCRH_WLEN_7; - break; - default: // CS8 - lcr_h = UART01x_LCRH_WLEN_8; - break; - } - if (termios->c_cflag & CSTOPB) - lcr_h |= UART01x_LCRH_STP2; - if (termios->c_cflag & PARENB) { - lcr_h |= UART01x_LCRH_PEN; - if (!(termios->c_cflag & PARODD)) - lcr_h |= UART01x_LCRH_EPS; - } - if (uap->fifosize > 1) - lcr_h |= UART01x_LCRH_FEN; - - spin_lock_irqsave(&port->lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - port->read_status_mask = UART011_DR_OE | 255; - if (termios->c_iflag & INPCK) - port->read_status_mask |= UART011_DR_FE | UART011_DR_PE; - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= UART011_DR_BE; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= UART011_DR_BE; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UART011_DR_OE; - } - - /* - * Ignore all characters if CREAD is not set. - */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= UART_DUMMY_DR_RX; - - if (UART_ENABLE_MS(port, termios->c_cflag)) - pl011_enable_ms(port); - - /* first, disable everything */ - old_cr = readw(port->membase + UART011_CR); - writew(0, port->membase + UART011_CR); - - if (termios->c_cflag & CRTSCTS) { - if (old_cr & UART011_CR_RTS) - old_cr |= UART011_CR_RTSEN; - - old_cr |= UART011_CR_CTSEN; - uap->autorts = true; - } else { - old_cr &= ~(UART011_CR_CTSEN | UART011_CR_RTSEN); - uap->autorts = false; - } - - if (uap->vendor->oversampling) { - if (baud > port->uartclk / 16) - old_cr |= ST_UART011_CR_OVSFACT; - else - old_cr &= ~ST_UART011_CR_OVSFACT; - } - - /* Set baud rate */ - writew(quot & 0x3f, port->membase + UART011_FBRD); - writew(quot >> 6, port->membase + UART011_IBRD); - - /* - * ----------v----------v----------v----------v----- - * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L - * ----------^----------^----------^----------^----- - */ - writew(lcr_h, port->membase + uap->lcrh_rx); - if (uap->lcrh_rx != uap->lcrh_tx) { - int i; - /* - * Wait 10 PCLKs before writing LCRH_TX register, - * to get this delay write read only register 10 times - */ - for (i = 0; i < 10; ++i) - writew(0xff, uap->port.membase + UART011_MIS); - writew(lcr_h, port->membase + uap->lcrh_tx); - } - writew(old_cr, port->membase + UART011_CR); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *pl011_type(struct uart_port *port) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - return uap->port.type == PORT_AMBA ? uap->type : NULL; -} - -/* - * Release the memory region(s) being used by 'port' - */ -static void pl010_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, SZ_4K); -} - -/* - * Request the memory region(s) being used by 'port' - */ -static int pl010_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, SZ_4K, "uart-pl011") - != NULL ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void pl010_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_AMBA; - pl010_request_port(port); - } -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= nr_irqs) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -static struct uart_ops amba_pl011_pops = { - .tx_empty = pl01x_tx_empty, - .set_mctrl = pl011_set_mctrl, - .get_mctrl = pl01x_get_mctrl, - .stop_tx = pl011_stop_tx, - .start_tx = pl011_start_tx, - .stop_rx = pl011_stop_rx, - .enable_ms = pl011_enable_ms, - .break_ctl = pl011_break_ctl, - .startup = pl011_startup, - .shutdown = pl011_shutdown, - .flush_buffer = pl011_dma_flush_buffer, - .set_termios = pl011_set_termios, - .type = pl011_type, - .release_port = pl010_release_port, - .request_port = pl010_request_port, - .config_port = pl010_config_port, - .verify_port = pl010_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = pl010_get_poll_char, - .poll_put_char = pl010_put_poll_char, -#endif -}; - -static struct uart_amba_port *amba_ports[UART_NR]; - -#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE - -static void pl011_console_putchar(struct uart_port *port, int ch) -{ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) - barrier(); - writew(ch, uap->port.membase + UART01x_DR); -} - -static void -pl011_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_amba_port *uap = amba_ports[co->index]; - unsigned int status, old_cr, new_cr; - - clk_enable(uap->clk); - - /* - * First save the CR then disable the interrupts - */ - old_cr = readw(uap->port.membase + UART011_CR); - new_cr = old_cr & ~UART011_CR_CTSEN; - new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE; - writew(new_cr, uap->port.membase + UART011_CR); - - uart_console_write(&uap->port, s, count, pl011_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the TCR - */ - do { - status = readw(uap->port.membase + UART01x_FR); - } while (status & UART01x_FR_BUSY); - writew(old_cr, uap->port.membase + UART011_CR); - - clk_disable(uap->clk); -} - -static void __init -pl011_console_get_options(struct uart_amba_port *uap, int *baud, - int *parity, int *bits) -{ - if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) { - unsigned int lcr_h, ibrd, fbrd; - - lcr_h = readw(uap->port.membase + uap->lcrh_tx); - - *parity = 'n'; - if (lcr_h & UART01x_LCRH_PEN) { - if (lcr_h & UART01x_LCRH_EPS) - *parity = 'e'; - else - *parity = 'o'; - } - - if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) - *bits = 7; - else - *bits = 8; - - ibrd = readw(uap->port.membase + UART011_IBRD); - fbrd = readw(uap->port.membase + UART011_FBRD); - - *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); - - if (uap->vendor->oversampling) { - if (readw(uap->port.membase + UART011_CR) - & ST_UART011_CR_OVSFACT) - *baud *= 2; - } - } -} - -static int __init pl011_console_setup(struct console *co, char *options) -{ - struct uart_amba_port *uap; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= UART_NR) - co->index = 0; - uap = amba_ports[co->index]; - if (!uap) - return -ENODEV; - - uap->port.uartclk = clk_get_rate(uap->clk); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - pl011_console_get_options(uap, &baud, &parity, &bits); - - return uart_set_options(&uap->port, co, baud, parity, bits, flow); -} - -static struct uart_driver amba_reg; -static struct console amba_console = { - .name = "ttyAMA", - .write = pl011_console_write, - .device = uart_console_device, - .setup = pl011_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &amba_reg, -}; - -#define AMBA_CONSOLE (&amba_console) -#else -#define AMBA_CONSOLE NULL -#endif - -static struct uart_driver amba_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyAMA", - .dev_name = "ttyAMA", - .major = SERIAL_AMBA_MAJOR, - .minor = SERIAL_AMBA_MINOR, - .nr = UART_NR, - .cons = AMBA_CONSOLE, -}; - -static int pl011_probe(struct amba_device *dev, struct amba_id *id) -{ - struct uart_amba_port *uap; - struct vendor_data *vendor = id->data; - void __iomem *base; - int i, ret; - - for (i = 0; i < ARRAY_SIZE(amba_ports); i++) - if (amba_ports[i] == NULL) - break; - - if (i == ARRAY_SIZE(amba_ports)) { - ret = -EBUSY; - goto out; - } - - uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL); - if (uap == NULL) { - ret = -ENOMEM; - goto out; - } - - base = ioremap(dev->res.start, resource_size(&dev->res)); - if (!base) { - ret = -ENOMEM; - goto free; - } - - uap->clk = clk_get(&dev->dev, NULL); - if (IS_ERR(uap->clk)) { - ret = PTR_ERR(uap->clk); - goto unmap; - } - - uap->vendor = vendor; - uap->lcrh_rx = vendor->lcrh_rx; - uap->lcrh_tx = vendor->lcrh_tx; - uap->fifosize = vendor->fifosize; - uap->port.dev = &dev->dev; - uap->port.mapbase = dev->res.start; - uap->port.membase = base; - uap->port.iotype = UPIO_MEM; - uap->port.irq = dev->irq[0]; - uap->port.fifosize = uap->fifosize; - uap->port.ops = &amba_pl011_pops; - uap->port.flags = UPF_BOOT_AUTOCONF; - uap->port.line = i; - pl011_dma_probe(uap); - - snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev)); - - amba_ports[i] = uap; - - amba_set_drvdata(dev, uap); - ret = uart_add_one_port(&amba_reg, &uap->port); - if (ret) { - amba_set_drvdata(dev, NULL); - amba_ports[i] = NULL; - pl011_dma_remove(uap); - clk_put(uap->clk); - unmap: - iounmap(base); - free: - kfree(uap); - } - out: - return ret; -} - -static int pl011_remove(struct amba_device *dev) -{ - struct uart_amba_port *uap = amba_get_drvdata(dev); - int i; - - amba_set_drvdata(dev, NULL); - - uart_remove_one_port(&amba_reg, &uap->port); - - for (i = 0; i < ARRAY_SIZE(amba_ports); i++) - if (amba_ports[i] == uap) - amba_ports[i] = NULL; - - pl011_dma_remove(uap); - iounmap(uap->port.membase); - clk_put(uap->clk); - kfree(uap); - return 0; -} - -#ifdef CONFIG_PM -static int pl011_suspend(struct amba_device *dev, pm_message_t state) -{ - struct uart_amba_port *uap = amba_get_drvdata(dev); - - if (!uap) - return -EINVAL; - - return uart_suspend_port(&amba_reg, &uap->port); -} - -static int pl011_resume(struct amba_device *dev) -{ - struct uart_amba_port *uap = amba_get_drvdata(dev); - - if (!uap) - return -EINVAL; - - return uart_resume_port(&amba_reg, &uap->port); -} -#endif - -static struct amba_id pl011_ids[] = { - { - .id = 0x00041011, - .mask = 0x000fffff, - .data = &vendor_arm, - }, - { - .id = 0x00380802, - .mask = 0x00ffffff, - .data = &vendor_st, - }, - { 0, 0 }, -}; - -static struct amba_driver pl011_driver = { - .drv = { - .name = "uart-pl011", - }, - .id_table = pl011_ids, - .probe = pl011_probe, - .remove = pl011_remove, -#ifdef CONFIG_PM - .suspend = pl011_suspend, - .resume = pl011_resume, -#endif -}; - -static int __init pl011_init(void) -{ - int ret; - printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); - - ret = uart_register_driver(&amba_reg); - if (ret == 0) { - ret = amba_driver_register(&pl011_driver); - if (ret) - uart_unregister_driver(&amba_reg); - } - return ret; -} - -static void __exit pl011_exit(void) -{ - amba_driver_unregister(&pl011_driver); - uart_unregister_driver(&amba_reg); -} - -/* - * While this can be a module, if builtin it's most likely the console - * So let's leave module_exit but move module_init to an earlier place - */ -arch_initcall(pl011_init); -module_exit(pl011_exit); - -MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd"); -MODULE_DESCRIPTION("ARM AMBA serial port driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/apbuart.c b/drivers/serial/apbuart.c deleted file mode 100644 index 095a5d562618..000000000000 --- a/drivers/serial/apbuart.c +++ /dev/null @@ -1,709 +0,0 @@ -/* - * Driver for GRLIB serial ports (APBUART) - * - * Based on linux/drivers/serial/amba.c - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * Copyright (C) 2003 Konrad Eisele - * Copyright (C) 2006 Daniel Hellstrom , Aeroflex Gaisler AB - * Copyright (C) 2008 Gilead Kutnick - * Copyright (C) 2009 Kristoffer Glembo , Aeroflex Gaisler AB - */ - -#if defined(CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "apbuart.h" - -#define SERIAL_APBUART_MAJOR TTY_MAJOR -#define SERIAL_APBUART_MINOR 64 -#define UART_DUMMY_RSR_RX 0x8000 /* for ignore all read */ - -static void apbuart_tx_chars(struct uart_port *port); - -static void apbuart_stop_tx(struct uart_port *port) -{ - unsigned int cr; - - cr = UART_GET_CTRL(port); - cr &= ~UART_CTRL_TI; - UART_PUT_CTRL(port, cr); -} - -static void apbuart_start_tx(struct uart_port *port) -{ - unsigned int cr; - - cr = UART_GET_CTRL(port); - cr |= UART_CTRL_TI; - UART_PUT_CTRL(port, cr); - - if (UART_GET_STATUS(port) & UART_STATUS_THE) - apbuart_tx_chars(port); -} - -static void apbuart_stop_rx(struct uart_port *port) -{ - unsigned int cr; - - cr = UART_GET_CTRL(port); - cr &= ~(UART_CTRL_RI); - UART_PUT_CTRL(port, cr); -} - -static void apbuart_enable_ms(struct uart_port *port) -{ - /* No modem status change interrupts for APBUART */ -} - -static void apbuart_rx_chars(struct uart_port *port) -{ - struct tty_struct *tty = port->state->port.tty; - unsigned int status, ch, rsr, flag; - unsigned int max_chars = port->fifosize; - - status = UART_GET_STATUS(port); - - while (UART_RX_DATA(status) && (max_chars--)) { - - ch = UART_GET_CHAR(port); - flag = TTY_NORMAL; - - port->icount.rx++; - - rsr = UART_GET_STATUS(port) | UART_DUMMY_RSR_RX; - UART_PUT_STATUS(port, 0); - if (rsr & UART_STATUS_ERR) { - - if (rsr & UART_STATUS_BR) { - rsr &= ~(UART_STATUS_FE | UART_STATUS_PE); - port->icount.brk++; - if (uart_handle_break(port)) - goto ignore_char; - } else if (rsr & UART_STATUS_PE) { - port->icount.parity++; - } else if (rsr & UART_STATUS_FE) { - port->icount.frame++; - } - if (rsr & UART_STATUS_OE) - port->icount.overrun++; - - rsr &= port->read_status_mask; - - if (rsr & UART_STATUS_PE) - flag = TTY_PARITY; - else if (rsr & UART_STATUS_FE) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, ch)) - goto ignore_char; - - uart_insert_char(port, rsr, UART_STATUS_OE, ch, flag); - - - ignore_char: - status = UART_GET_STATUS(port); - } - - tty_flip_buffer_push(tty); -} - -static void apbuart_tx_chars(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - int count; - - if (port->x_char) { - UART_PUT_CHAR(port, port->x_char); - port->icount.tx++; - port->x_char = 0; - return; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - apbuart_stop_tx(port); - return; - } - - /* amba: fill FIFO */ - count = port->fifosize >> 1; - do { - UART_PUT_CHAR(port, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - apbuart_stop_tx(port); -} - -static irqreturn_t apbuart_int(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - unsigned int status; - - spin_lock(&port->lock); - - status = UART_GET_STATUS(port); - if (status & UART_STATUS_DR) - apbuart_rx_chars(port); - if (status & UART_STATUS_THE) - apbuart_tx_chars(port); - - spin_unlock(&port->lock); - - return IRQ_HANDLED; -} - -static unsigned int apbuart_tx_empty(struct uart_port *port) -{ - unsigned int status = UART_GET_STATUS(port); - return status & UART_STATUS_THE ? TIOCSER_TEMT : 0; -} - -static unsigned int apbuart_get_mctrl(struct uart_port *port) -{ - /* The GRLIB APBUART handles flow control in hardware */ - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; -} - -static void apbuart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* The GRLIB APBUART handles flow control in hardware */ -} - -static void apbuart_break_ctl(struct uart_port *port, int break_state) -{ - /* We don't support sending break */ -} - -static int apbuart_startup(struct uart_port *port) -{ - int retval; - unsigned int cr; - - /* Allocate the IRQ */ - retval = request_irq(port->irq, apbuart_int, 0, "apbuart", port); - if (retval) - return retval; - - /* Finally, enable interrupts */ - cr = UART_GET_CTRL(port); - UART_PUT_CTRL(port, - cr | UART_CTRL_RE | UART_CTRL_TE | - UART_CTRL_RI | UART_CTRL_TI); - - return 0; -} - -static void apbuart_shutdown(struct uart_port *port) -{ - unsigned int cr; - - /* disable all interrupts, disable the port */ - cr = UART_GET_CTRL(port); - UART_PUT_CTRL(port, - cr & ~(UART_CTRL_RE | UART_CTRL_TE | - UART_CTRL_RI | UART_CTRL_TI)); - - /* Free the interrupt */ - free_irq(port->irq, port); -} - -static void apbuart_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - unsigned int cr; - unsigned long flags; - unsigned int baud, quot; - - /* Ask the core to calculate the divisor for us. */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); - if (baud == 0) - panic("invalid baudrate %i\n", port->uartclk / 16); - - /* uart_get_divisor calc a *16 uart freq, apbuart is *8 */ - quot = (uart_get_divisor(port, baud)) * 2; - cr = UART_GET_CTRL(port); - cr &= ~(UART_CTRL_PE | UART_CTRL_PS); - - if (termios->c_cflag & PARENB) { - cr |= UART_CTRL_PE; - if ((termios->c_cflag & PARODD)) - cr |= UART_CTRL_PS; - } - - /* Enable flow control. */ - if (termios->c_cflag & CRTSCTS) - cr |= UART_CTRL_FL; - - spin_lock_irqsave(&port->lock, flags); - - /* Update the per-port timeout. */ - uart_update_timeout(port, termios->c_cflag, baud); - - port->read_status_mask = UART_STATUS_OE; - if (termios->c_iflag & INPCK) - port->read_status_mask |= UART_STATUS_FE | UART_STATUS_PE; - - /* Characters to ignore */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UART_STATUS_FE | UART_STATUS_PE; - - /* Ignore all characters if CREAD is not set. */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= UART_DUMMY_RSR_RX; - - /* Set baud rate */ - quot -= 1; - UART_PUT_SCAL(port, quot); - UART_PUT_CTRL(port, cr); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *apbuart_type(struct uart_port *port) -{ - return port->type == PORT_APBUART ? "GRLIB/APBUART" : NULL; -} - -static void apbuart_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, 0x100); -} - -static int apbuart_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, 0x100, "grlib-apbuart") - != NULL ? 0 : -EBUSY; - return 0; -} - -/* Configure/autoconfigure the port */ -static void apbuart_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_APBUART; - apbuart_request_port(port); - } -} - -/* Verify the new serial_struct (for TIOCSSERIAL) */ -static int apbuart_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_APBUART) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= NR_IRQS) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -static struct uart_ops grlib_apbuart_ops = { - .tx_empty = apbuart_tx_empty, - .set_mctrl = apbuart_set_mctrl, - .get_mctrl = apbuart_get_mctrl, - .stop_tx = apbuart_stop_tx, - .start_tx = apbuart_start_tx, - .stop_rx = apbuart_stop_rx, - .enable_ms = apbuart_enable_ms, - .break_ctl = apbuart_break_ctl, - .startup = apbuart_startup, - .shutdown = apbuart_shutdown, - .set_termios = apbuart_set_termios, - .type = apbuart_type, - .release_port = apbuart_release_port, - .request_port = apbuart_request_port, - .config_port = apbuart_config_port, - .verify_port = apbuart_verify_port, -}; - -static struct uart_port grlib_apbuart_ports[UART_NR]; -static struct device_node *grlib_apbuart_nodes[UART_NR]; - -static int apbuart_scan_fifo_size(struct uart_port *port, int portnumber) -{ - int ctrl, loop = 0; - int status; - int fifosize; - unsigned long flags; - - ctrl = UART_GET_CTRL(port); - - /* - * Enable the transceiver and wait for it to be ready to send data. - * Clear interrupts so that this process will not be externally - * interrupted in the middle (which can cause the transceiver to - * drain prematurely). - */ - - local_irq_save(flags); - - UART_PUT_CTRL(port, ctrl | UART_CTRL_TE); - - while (!UART_TX_READY(UART_GET_STATUS(port))) - loop++; - - /* - * Disable the transceiver so data isn't actually sent during the - * actual test. - */ - - UART_PUT_CTRL(port, ctrl & ~(UART_CTRL_TE)); - - fifosize = 1; - UART_PUT_CHAR(port, 0); - - /* - * So long as transmitting a character increments the tranceivier FIFO - * length the FIFO must be at least that big. These bytes will - * automatically drain off of the FIFO. - */ - - status = UART_GET_STATUS(port); - while (((status >> 20) & 0x3F) == fifosize) { - fifosize++; - UART_PUT_CHAR(port, 0); - status = UART_GET_STATUS(port); - } - - fifosize--; - - UART_PUT_CTRL(port, ctrl); - local_irq_restore(flags); - - if (fifosize == 0) - fifosize = 1; - - return fifosize; -} - -static void apbuart_flush_fifo(struct uart_port *port) -{ - int i; - - for (i = 0; i < port->fifosize; i++) - UART_GET_CHAR(port); -} - - -/* ======================================================================== */ -/* Console driver, if enabled */ -/* ======================================================================== */ - -#ifdef CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE - -static void apbuart_console_putchar(struct uart_port *port, int ch) -{ - unsigned int status; - do { - status = UART_GET_STATUS(port); - } while (!UART_TX_READY(status)); - UART_PUT_CHAR(port, ch); -} - -static void -apbuart_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_port *port = &grlib_apbuart_ports[co->index]; - unsigned int status, old_cr, new_cr; - - /* First save the CR then disable the interrupts */ - old_cr = UART_GET_CTRL(port); - new_cr = old_cr & ~(UART_CTRL_RI | UART_CTRL_TI); - UART_PUT_CTRL(port, new_cr); - - uart_console_write(port, s, count, apbuart_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the TCR - */ - do { - status = UART_GET_STATUS(port); - } while (!UART_TX_READY(status)); - UART_PUT_CTRL(port, old_cr); -} - -static void __init -apbuart_console_get_options(struct uart_port *port, int *baud, - int *parity, int *bits) -{ - if (UART_GET_CTRL(port) & (UART_CTRL_RE | UART_CTRL_TE)) { - - unsigned int quot, status; - status = UART_GET_STATUS(port); - - *parity = 'n'; - if (status & UART_CTRL_PE) { - if ((status & UART_CTRL_PS) == 0) - *parity = 'e'; - else - *parity = 'o'; - } - - *bits = 8; - quot = UART_GET_SCAL(port) / 8; - *baud = port->uartclk / (16 * (quot + 1)); - } -} - -static int __init apbuart_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - pr_debug("apbuart_console_setup co=%p, co->index=%i, options=%s\n", - co, co->index, options); - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= grlib_apbuart_port_nr) - co->index = 0; - - port = &grlib_apbuart_ports[co->index]; - - spin_lock_init(&port->lock); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - apbuart_console_get_options(port, &baud, &parity, &bits); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver grlib_apbuart_driver; - -static struct console grlib_apbuart_console = { - .name = "ttyS", - .write = apbuart_console_write, - .device = uart_console_device, - .setup = apbuart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &grlib_apbuart_driver, -}; - - -static int grlib_apbuart_configure(void); - -static int __init apbuart_console_init(void) -{ - if (grlib_apbuart_configure()) - return -ENODEV; - register_console(&grlib_apbuart_console); - return 0; -} - -console_initcall(apbuart_console_init); - -#define APBUART_CONSOLE (&grlib_apbuart_console) -#else -#define APBUART_CONSOLE NULL -#endif - -static struct uart_driver grlib_apbuart_driver = { - .owner = THIS_MODULE, - .driver_name = "serial", - .dev_name = "ttyS", - .major = SERIAL_APBUART_MAJOR, - .minor = SERIAL_APBUART_MINOR, - .nr = UART_NR, - .cons = APBUART_CONSOLE, -}; - - -/* ======================================================================== */ -/* OF Platform Driver */ -/* ======================================================================== */ - -static int __devinit apbuart_probe(struct platform_device *op, - const struct of_device_id *match) -{ - int i = -1; - struct uart_port *port = NULL; - - i = 0; - for (i = 0; i < grlib_apbuart_port_nr; i++) { - if (op->dev.of_node == grlib_apbuart_nodes[i]) - break; - } - - port = &grlib_apbuart_ports[i]; - port->dev = &op->dev; - - uart_add_one_port(&grlib_apbuart_driver, (struct uart_port *) port); - - apbuart_flush_fifo((struct uart_port *) port); - - printk(KERN_INFO "grlib-apbuart at 0x%llx, irq %d\n", - (unsigned long long) port->mapbase, port->irq); - return 0; -} - -static struct of_device_id __initdata apbuart_match[] = { - { - .name = "GAISLER_APBUART", - }, - { - .name = "01_00c", - }, - {}, -}; - -static struct of_platform_driver grlib_apbuart_of_driver = { - .probe = apbuart_probe, - .driver = { - .owner = THIS_MODULE, - .name = "grlib-apbuart", - .of_match_table = apbuart_match, - }, -}; - - -static int grlib_apbuart_configure(void) -{ - struct device_node *np, *rp; - const u32 *prop; - int freq_khz, line = 0; - - /* Get bus frequency */ - rp = of_find_node_by_path("/"); - if (!rp) - return -ENODEV; - rp = of_get_next_child(rp, NULL); - if (!rp) - return -ENODEV; - prop = of_get_property(rp, "clock-frequency", NULL); - if (!prop) - return -ENODEV; - freq_khz = *prop; - - for_each_matching_node(np, apbuart_match) { - const int *irqs, *ampopts; - const struct amba_prom_registers *regs; - struct uart_port *port; - unsigned long addr; - - ampopts = of_get_property(np, "ampopts", NULL); - if (ampopts && (*ampopts == 0)) - continue; /* Ignore if used by another OS instance */ - - irqs = of_get_property(np, "interrupts", NULL); - regs = of_get_property(np, "reg", NULL); - - if (!irqs || !regs) - continue; - - grlib_apbuart_nodes[line] = np; - - addr = regs->phys_addr; - - port = &grlib_apbuart_ports[line]; - - port->mapbase = addr; - port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map)); - port->irq = *irqs; - port->iotype = UPIO_MEM; - port->ops = &grlib_apbuart_ops; - port->flags = UPF_BOOT_AUTOCONF; - port->line = line; - port->uartclk = freq_khz * 1000; - port->fifosize = apbuart_scan_fifo_size((struct uart_port *) port, line); - line++; - - /* We support maximum UART_NR uarts ... */ - if (line == UART_NR) - break; - } - - grlib_apbuart_driver.nr = grlib_apbuart_port_nr = line; - return line ? 0 : -ENODEV; -} - -static int __init grlib_apbuart_init(void) -{ - int ret; - - /* Find all APBUARTS in device the tree and initialize their ports */ - ret = grlib_apbuart_configure(); - if (ret) - return ret; - - printk(KERN_INFO "Serial: GRLIB APBUART driver\n"); - - ret = uart_register_driver(&grlib_apbuart_driver); - - if (ret) { - printk(KERN_ERR "%s: uart_register_driver failed (%i)\n", - __FILE__, ret); - return ret; - } - - ret = of_register_platform_driver(&grlib_apbuart_of_driver); - if (ret) { - printk(KERN_ERR - "%s: of_register_platform_driver failed (%i)\n", - __FILE__, ret); - uart_unregister_driver(&grlib_apbuart_driver); - return ret; - } - - return ret; -} - -static void __exit grlib_apbuart_exit(void) -{ - int i; - - for (i = 0; i < grlib_apbuart_port_nr; i++) - uart_remove_one_port(&grlib_apbuart_driver, - &grlib_apbuart_ports[i]); - - uart_unregister_driver(&grlib_apbuart_driver); - of_unregister_platform_driver(&grlib_apbuart_of_driver); -} - -module_init(grlib_apbuart_init); -module_exit(grlib_apbuart_exit); - -MODULE_AUTHOR("Aeroflex Gaisler AB"); -MODULE_DESCRIPTION("GRLIB APBUART serial driver"); -MODULE_VERSION("2.1"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/apbuart.h b/drivers/serial/apbuart.h deleted file mode 100644 index 5faf87c8d2bc..000000000000 --- a/drivers/serial/apbuart.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef __GRLIB_APBUART_H__ -#define __GRLIB_APBUART_H__ - -#include - -#define UART_NR 8 -static int grlib_apbuart_port_nr; - -struct grlib_apbuart_regs_map { - u32 data; - u32 status; - u32 ctrl; - u32 scaler; -}; - -struct amba_prom_registers { - unsigned int phys_addr; - unsigned int reg_size; -}; - -/* - * The following defines the bits in the APBUART Status Registers. - */ -#define UART_STATUS_DR 0x00000001 /* Data Ready */ -#define UART_STATUS_TSE 0x00000002 /* TX Send Register Empty */ -#define UART_STATUS_THE 0x00000004 /* TX Hold Register Empty */ -#define UART_STATUS_BR 0x00000008 /* Break Error */ -#define UART_STATUS_OE 0x00000010 /* RX Overrun Error */ -#define UART_STATUS_PE 0x00000020 /* RX Parity Error */ -#define UART_STATUS_FE 0x00000040 /* RX Framing Error */ -#define UART_STATUS_ERR 0x00000078 /* Error Mask */ - -/* - * The following defines the bits in the APBUART Ctrl Registers. - */ -#define UART_CTRL_RE 0x00000001 /* Receiver enable */ -#define UART_CTRL_TE 0x00000002 /* Transmitter enable */ -#define UART_CTRL_RI 0x00000004 /* Receiver interrupt enable */ -#define UART_CTRL_TI 0x00000008 /* Transmitter irq */ -#define UART_CTRL_PS 0x00000010 /* Parity select */ -#define UART_CTRL_PE 0x00000020 /* Parity enable */ -#define UART_CTRL_FL 0x00000040 /* Flow control enable */ -#define UART_CTRL_LB 0x00000080 /* Loopback enable */ - -#define APBBASE(port) ((struct grlib_apbuart_regs_map *)((port)->membase)) - -#define APBBASE_DATA_P(port) (&(APBBASE(port)->data)) -#define APBBASE_STATUS_P(port) (&(APBBASE(port)->status)) -#define APBBASE_CTRL_P(port) (&(APBBASE(port)->ctrl)) -#define APBBASE_SCALAR_P(port) (&(APBBASE(port)->scaler)) - -#define UART_GET_CHAR(port) (__raw_readl(APBBASE_DATA_P(port))) -#define UART_PUT_CHAR(port, v) (__raw_writel(v, APBBASE_DATA_P(port))) -#define UART_GET_STATUS(port) (__raw_readl(APBBASE_STATUS_P(port))) -#define UART_PUT_STATUS(port, v)(__raw_writel(v, APBBASE_STATUS_P(port))) -#define UART_GET_CTRL(port) (__raw_readl(APBBASE_CTRL_P(port))) -#define UART_PUT_CTRL(port, v) (__raw_writel(v, APBBASE_CTRL_P(port))) -#define UART_GET_SCAL(port) (__raw_readl(APBBASE_SCALAR_P(port))) -#define UART_PUT_SCAL(port, v) (__raw_writel(v, APBBASE_SCALAR_P(port))) - -#define UART_RX_DATA(s) (((s) & UART_STATUS_DR) != 0) -#define UART_TX_READY(s) (((s) & UART_STATUS_THE) != 0) - -#endif /* __GRLIB_APBUART_H__ */ diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c deleted file mode 100644 index 3892666b5fbd..000000000000 --- a/drivers/serial/atmel_serial.c +++ /dev/null @@ -1,1808 +0,0 @@ -/* - * linux/drivers/char/atmel_serial.c - * - * Driver for Atmel AT91 / AT32 Serial ports - * Copyright (C) 2003 Rick Bronson - * - * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd. - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * DMA support added by Chip Coldwell. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#ifdef CONFIG_ARM -#include -#include -#endif - -#define PDC_BUFFER_SIZE 512 -/* Revisit: We should calculate this based on the actual port settings */ -#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */ - -#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - -static void atmel_start_rx(struct uart_port *port); -static void atmel_stop_rx(struct uart_port *port); - -#ifdef CONFIG_SERIAL_ATMEL_TTYAT - -/* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we - * should coexist with the 8250 driver, such as if we have an external 16C550 - * UART. */ -#define SERIAL_ATMEL_MAJOR 204 -#define MINOR_START 154 -#define ATMEL_DEVICENAME "ttyAT" - -#else - -/* Use device name ttyS, major 4, minor 64-68. This is the usual serial port - * name, but it is legally reserved for the 8250 driver. */ -#define SERIAL_ATMEL_MAJOR TTY_MAJOR -#define MINOR_START 64 -#define ATMEL_DEVICENAME "ttyS" - -#endif - -#define ATMEL_ISR_PASS_LIMIT 256 - -/* UART registers. CR is write-only, hence no GET macro */ -#define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR) -#define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR) -#define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR) -#define UART_PUT_IER(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IER) -#define UART_PUT_IDR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IDR) -#define UART_GET_IMR(port) __raw_readl((port)->membase + ATMEL_US_IMR) -#define UART_GET_CSR(port) __raw_readl((port)->membase + ATMEL_US_CSR) -#define UART_GET_CHAR(port) __raw_readl((port)->membase + ATMEL_US_RHR) -#define UART_PUT_CHAR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_THR) -#define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR) -#define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR) -#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR) -#define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR) - - /* PDC registers */ -#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR) -#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR) - -#define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR) -#define UART_GET_RPR(port) __raw_readl((port)->membase + ATMEL_PDC_RPR) -#define UART_PUT_RCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RCR) -#define UART_PUT_RNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNPR) -#define UART_PUT_RNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNCR) - -#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR) -#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR) -#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR) - -static int (*atmel_open_hook)(struct uart_port *); -static void (*atmel_close_hook)(struct uart_port *); - -struct atmel_dma_buffer { - unsigned char *buf; - dma_addr_t dma_addr; - unsigned int dma_size; - unsigned int ofs; -}; - -struct atmel_uart_char { - u16 status; - u16 ch; -}; - -#define ATMEL_SERIAL_RINGSIZE 1024 - -/* - * We wrap our port structure around the generic uart_port. - */ -struct atmel_uart_port { - struct uart_port uart; /* uart */ - struct clk *clk; /* uart clock */ - int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */ - u32 backup_imr; /* IMR saved during suspend */ - int break_active; /* break being received */ - - short use_dma_rx; /* enable PDC receiver */ - short pdc_rx_idx; /* current PDC RX buffer */ - struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */ - - short use_dma_tx; /* enable PDC transmitter */ - struct atmel_dma_buffer pdc_tx; /* PDC transmitter */ - - struct tasklet_struct tasklet; - unsigned int irq_status; - unsigned int irq_status_prev; - - struct circ_buf rx_ring; - - struct serial_rs485 rs485; /* rs485 settings */ - unsigned int tx_done_mask; -}; - -static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART]; - -#ifdef SUPPORT_SYSRQ -static struct console atmel_console; -#endif - -static inline struct atmel_uart_port * -to_atmel_uart_port(struct uart_port *uart) -{ - return container_of(uart, struct atmel_uart_port, uart); -} - -#ifdef CONFIG_SERIAL_ATMEL_PDC -static bool atmel_use_dma_rx(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - return atmel_port->use_dma_rx; -} - -static bool atmel_use_dma_tx(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - return atmel_port->use_dma_tx; -} -#else -static bool atmel_use_dma_rx(struct uart_port *port) -{ - return false; -} - -static bool atmel_use_dma_tx(struct uart_port *port) -{ - return false; -} -#endif - -/* Enable or disable the rs485 support */ -void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - unsigned int mode; - - spin_lock(&port->lock); - - /* Disable interrupts */ - UART_PUT_IDR(port, atmel_port->tx_done_mask); - - mode = UART_GET_MR(port); - - /* Resetting serial mode to RS232 (0x0) */ - mode &= ~ATMEL_US_USMODE; - - atmel_port->rs485 = *rs485conf; - - if (rs485conf->flags & SER_RS485_ENABLED) { - dev_dbg(port->dev, "Setting UART to RS485\n"); - atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; - if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND) - UART_PUT_TTGR(port, rs485conf->delay_rts_after_send); - mode |= ATMEL_US_USMODE_RS485; - } else { - dev_dbg(port->dev, "Setting UART to RS232\n"); - if (atmel_use_dma_tx(port)) - atmel_port->tx_done_mask = ATMEL_US_ENDTX | - ATMEL_US_TXBUFE; - else - atmel_port->tx_done_mask = ATMEL_US_TXRDY; - } - UART_PUT_MR(port, mode); - - /* Enable interrupts */ - UART_PUT_IER(port, atmel_port->tx_done_mask); - - spin_unlock(&port->lock); - -} - -/* - * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty. - */ -static u_int atmel_tx_empty(struct uart_port *port) -{ - return (UART_GET_CSR(port) & ATMEL_US_TXEMPTY) ? TIOCSER_TEMT : 0; -} - -/* - * Set state of the modem control output lines - */ -static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) -{ - unsigned int control = 0; - unsigned int mode; - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - -#ifdef CONFIG_ARCH_AT91RM9200 - if (cpu_is_at91rm9200()) { - /* - * AT91RM9200 Errata #39: RTS0 is not internally connected - * to PA21. We need to drive the pin manually. - */ - if (port->mapbase == AT91RM9200_BASE_US0) { - if (mctrl & TIOCM_RTS) - at91_set_gpio_value(AT91_PIN_PA21, 0); - else - at91_set_gpio_value(AT91_PIN_PA21, 1); - } - } -#endif - - if (mctrl & TIOCM_RTS) - control |= ATMEL_US_RTSEN; - else - control |= ATMEL_US_RTSDIS; - - if (mctrl & TIOCM_DTR) - control |= ATMEL_US_DTREN; - else - control |= ATMEL_US_DTRDIS; - - UART_PUT_CR(port, control); - - /* Local loopback mode? */ - mode = UART_GET_MR(port) & ~ATMEL_US_CHMODE; - if (mctrl & TIOCM_LOOP) - mode |= ATMEL_US_CHMODE_LOC_LOOP; - else - mode |= ATMEL_US_CHMODE_NORMAL; - - /* Resetting serial mode to RS232 (0x0) */ - mode &= ~ATMEL_US_USMODE; - - if (atmel_port->rs485.flags & SER_RS485_ENABLED) { - dev_dbg(port->dev, "Setting UART to RS485\n"); - if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) - UART_PUT_TTGR(port, - atmel_port->rs485.delay_rts_after_send); - mode |= ATMEL_US_USMODE_RS485; - } else { - dev_dbg(port->dev, "Setting UART to RS232\n"); - } - UART_PUT_MR(port, mode); -} - -/* - * Get state of the modem control input lines - */ -static u_int atmel_get_mctrl(struct uart_port *port) -{ - unsigned int status, ret = 0; - - status = UART_GET_CSR(port); - - /* - * The control signals are active low. - */ - if (!(status & ATMEL_US_DCD)) - ret |= TIOCM_CD; - if (!(status & ATMEL_US_CTS)) - ret |= TIOCM_CTS; - if (!(status & ATMEL_US_DSR)) - ret |= TIOCM_DSR; - if (!(status & ATMEL_US_RI)) - ret |= TIOCM_RI; - - return ret; -} - -/* - * Stop transmitting. - */ -static void atmel_stop_tx(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - if (atmel_use_dma_tx(port)) { - /* disable PDC transmit */ - UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); - } - /* Disable interrupts */ - UART_PUT_IDR(port, atmel_port->tx_done_mask); - - if (atmel_port->rs485.flags & SER_RS485_ENABLED) - atmel_start_rx(port); -} - -/* - * Start transmitting. - */ -static void atmel_start_tx(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - if (atmel_use_dma_tx(port)) { - if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN) - /* The transmitter is already running. Yes, we - really need this.*/ - return; - - if (atmel_port->rs485.flags & SER_RS485_ENABLED) - atmel_stop_rx(port); - - /* re-enable PDC transmit */ - UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); - } - /* Enable interrupts */ - UART_PUT_IER(port, atmel_port->tx_done_mask); -} - -/* - * start receiving - port is in process of being opened. - */ -static void atmel_start_rx(struct uart_port *port) -{ - UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */ - - if (atmel_use_dma_rx(port)) { - /* enable PDC controller */ - UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | - port->read_status_mask); - UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); - } else { - UART_PUT_IER(port, ATMEL_US_RXRDY); - } -} - -/* - * Stop receiving - port is in process of being closed. - */ -static void atmel_stop_rx(struct uart_port *port) -{ - if (atmel_use_dma_rx(port)) { - /* disable PDC receive */ - UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); - UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | - port->read_status_mask); - } else { - UART_PUT_IDR(port, ATMEL_US_RXRDY); - } -} - -/* - * Enable modem status interrupts - */ -static void atmel_enable_ms(struct uart_port *port) -{ - UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC - | ATMEL_US_DCDIC | ATMEL_US_CTSIC); -} - -/* - * Control the transmission of a break signal - */ -static void atmel_break_ctl(struct uart_port *port, int break_state) -{ - if (break_state != 0) - UART_PUT_CR(port, ATMEL_US_STTBRK); /* start break */ - else - UART_PUT_CR(port, ATMEL_US_STPBRK); /* stop break */ -} - -/* - * Stores the incoming character in the ring buffer - */ -static void -atmel_buffer_rx_char(struct uart_port *port, unsigned int status, - unsigned int ch) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - struct circ_buf *ring = &atmel_port->rx_ring; - struct atmel_uart_char *c; - - if (!CIRC_SPACE(ring->head, ring->tail, ATMEL_SERIAL_RINGSIZE)) - /* Buffer overflow, ignore char */ - return; - - c = &((struct atmel_uart_char *)ring->buf)[ring->head]; - c->status = status; - c->ch = ch; - - /* Make sure the character is stored before we update head. */ - smp_wmb(); - - ring->head = (ring->head + 1) & (ATMEL_SERIAL_RINGSIZE - 1); -} - -/* - * Deal with parity, framing and overrun errors. - */ -static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status) -{ - /* clear error */ - UART_PUT_CR(port, ATMEL_US_RSTSTA); - - if (status & ATMEL_US_RXBRK) { - /* ignore side-effect */ - status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); - port->icount.brk++; - } - if (status & ATMEL_US_PARE) - port->icount.parity++; - if (status & ATMEL_US_FRAME) - port->icount.frame++; - if (status & ATMEL_US_OVRE) - port->icount.overrun++; -} - -/* - * Characters received (called from interrupt handler) - */ -static void atmel_rx_chars(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - unsigned int status, ch; - - status = UART_GET_CSR(port); - while (status & ATMEL_US_RXRDY) { - ch = UART_GET_CHAR(port); - - /* - * note that the error handling code is - * out of the main execution path - */ - if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME - | ATMEL_US_OVRE | ATMEL_US_RXBRK) - || atmel_port->break_active)) { - - /* clear error */ - UART_PUT_CR(port, ATMEL_US_RSTSTA); - - if (status & ATMEL_US_RXBRK - && !atmel_port->break_active) { - atmel_port->break_active = 1; - UART_PUT_IER(port, ATMEL_US_RXBRK); - } else { - /* - * This is either the end-of-break - * condition or we've received at - * least one character without RXBRK - * being set. In both cases, the next - * RXBRK will indicate start-of-break. - */ - UART_PUT_IDR(port, ATMEL_US_RXBRK); - status &= ~ATMEL_US_RXBRK; - atmel_port->break_active = 0; - } - } - - atmel_buffer_rx_char(port, status, ch); - status = UART_GET_CSR(port); - } - - tasklet_schedule(&atmel_port->tasklet); -} - -/* - * Transmit characters (called from tasklet with TXRDY interrupt - * disabled) - */ -static void atmel_tx_chars(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - if (port->x_char && UART_GET_CSR(port) & atmel_port->tx_done_mask) { - UART_PUT_CHAR(port, port->x_char); - port->icount.tx++; - port->x_char = 0; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) - return; - - while (UART_GET_CSR(port) & atmel_port->tx_done_mask) { - UART_PUT_CHAR(port, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (!uart_circ_empty(xmit)) - /* Enable interrupts */ - UART_PUT_IER(port, atmel_port->tx_done_mask); -} - -/* - * receive interrupt handler. - */ -static void -atmel_handle_receive(struct uart_port *port, unsigned int pending) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - if (atmel_use_dma_rx(port)) { - /* - * PDC receive. Just schedule the tasklet and let it - * figure out the details. - * - * TODO: We're not handling error flags correctly at - * the moment. - */ - if (pending & (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)) { - UART_PUT_IDR(port, (ATMEL_US_ENDRX - | ATMEL_US_TIMEOUT)); - tasklet_schedule(&atmel_port->tasklet); - } - - if (pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | - ATMEL_US_FRAME | ATMEL_US_PARE)) - atmel_pdc_rxerr(port, pending); - } - - /* Interrupt receive */ - if (pending & ATMEL_US_RXRDY) - atmel_rx_chars(port); - else if (pending & ATMEL_US_RXBRK) { - /* - * End of break detected. If it came along with a - * character, atmel_rx_chars will handle it. - */ - UART_PUT_CR(port, ATMEL_US_RSTSTA); - UART_PUT_IDR(port, ATMEL_US_RXBRK); - atmel_port->break_active = 0; - } -} - -/* - * transmit interrupt handler. (Transmit is IRQF_NODELAY safe) - */ -static void -atmel_handle_transmit(struct uart_port *port, unsigned int pending) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - if (pending & atmel_port->tx_done_mask) { - /* Either PDC or interrupt transmission */ - UART_PUT_IDR(port, atmel_port->tx_done_mask); - tasklet_schedule(&atmel_port->tasklet); - } -} - -/* - * status flags interrupt handler. - */ -static void -atmel_handle_status(struct uart_port *port, unsigned int pending, - unsigned int status) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC - | ATMEL_US_CTSIC)) { - atmel_port->irq_status = status; - tasklet_schedule(&atmel_port->tasklet); - } -} - -/* - * Interrupt handler - */ -static irqreturn_t atmel_interrupt(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - unsigned int status, pending, pass_counter = 0; - - do { - status = UART_GET_CSR(port); - pending = status & UART_GET_IMR(port); - if (!pending) - break; - - atmel_handle_receive(port, pending); - atmel_handle_status(port, pending, status); - atmel_handle_transmit(port, pending); - } while (pass_counter++ < ATMEL_ISR_PASS_LIMIT); - - return pass_counter ? IRQ_HANDLED : IRQ_NONE; -} - -/* - * Called from tasklet with ENDTX and TXBUFE interrupts disabled. - */ -static void atmel_tx_dma(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - struct circ_buf *xmit = &port->state->xmit; - struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; - int count; - - /* nothing left to transmit? */ - if (UART_GET_TCR(port)) - return; - - xmit->tail += pdc->ofs; - xmit->tail &= UART_XMIT_SIZE - 1; - - port->icount.tx += pdc->ofs; - pdc->ofs = 0; - - /* more to transmit - setup next transfer */ - - /* disable PDC transmit */ - UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); - - if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) { - dma_sync_single_for_device(port->dev, - pdc->dma_addr, - pdc->dma_size, - DMA_TO_DEVICE); - - count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); - pdc->ofs = count; - - UART_PUT_TPR(port, pdc->dma_addr + xmit->tail); - UART_PUT_TCR(port, count); - /* re-enable PDC transmit */ - UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); - /* Enable interrupts */ - UART_PUT_IER(port, atmel_port->tx_done_mask); - } else { - if (atmel_port->rs485.flags & SER_RS485_ENABLED) { - /* DMA done, stop TX, start RX for RS485 */ - atmel_start_rx(port); - } - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - -static void atmel_rx_from_ring(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - struct circ_buf *ring = &atmel_port->rx_ring; - unsigned int flg; - unsigned int status; - - while (ring->head != ring->tail) { - struct atmel_uart_char c; - - /* Make sure c is loaded after head. */ - smp_rmb(); - - c = ((struct atmel_uart_char *)ring->buf)[ring->tail]; - - ring->tail = (ring->tail + 1) & (ATMEL_SERIAL_RINGSIZE - 1); - - port->icount.rx++; - status = c.status; - flg = TTY_NORMAL; - - /* - * note that the error handling code is - * out of the main execution path - */ - if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME - | ATMEL_US_OVRE | ATMEL_US_RXBRK))) { - if (status & ATMEL_US_RXBRK) { - /* ignore side-effect */ - status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); - - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } - if (status & ATMEL_US_PARE) - port->icount.parity++; - if (status & ATMEL_US_FRAME) - port->icount.frame++; - if (status & ATMEL_US_OVRE) - port->icount.overrun++; - - status &= port->read_status_mask; - - if (status & ATMEL_US_RXBRK) - flg = TTY_BREAK; - else if (status & ATMEL_US_PARE) - flg = TTY_PARITY; - else if (status & ATMEL_US_FRAME) - flg = TTY_FRAME; - } - - - if (uart_handle_sysrq_char(port, c.ch)) - continue; - - uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg); - } - - /* - * Drop the lock here since it might end up calling - * uart_start(), which takes the lock. - */ - spin_unlock(&port->lock); - tty_flip_buffer_push(port->state->port.tty); - spin_lock(&port->lock); -} - -static void atmel_rx_from_dma(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - struct tty_struct *tty = port->state->port.tty; - struct atmel_dma_buffer *pdc; - int rx_idx = atmel_port->pdc_rx_idx; - unsigned int head; - unsigned int tail; - unsigned int count; - - do { - /* Reset the UART timeout early so that we don't miss one */ - UART_PUT_CR(port, ATMEL_US_STTTO); - - pdc = &atmel_port->pdc_rx[rx_idx]; - head = UART_GET_RPR(port) - pdc->dma_addr; - tail = pdc->ofs; - - /* If the PDC has switched buffers, RPR won't contain - * any address within the current buffer. Since head - * is unsigned, we just need a one-way comparison to - * find out. - * - * In this case, we just need to consume the entire - * buffer and resubmit it for DMA. This will clear the - * ENDRX bit as well, so that we can safely re-enable - * all interrupts below. - */ - head = min(head, pdc->dma_size); - - if (likely(head != tail)) { - dma_sync_single_for_cpu(port->dev, pdc->dma_addr, - pdc->dma_size, DMA_FROM_DEVICE); - - /* - * head will only wrap around when we recycle - * the DMA buffer, and when that happens, we - * explicitly set tail to 0. So head will - * always be greater than tail. - */ - count = head - tail; - - tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count); - - dma_sync_single_for_device(port->dev, pdc->dma_addr, - pdc->dma_size, DMA_FROM_DEVICE); - - port->icount.rx += count; - pdc->ofs = head; - } - - /* - * If the current buffer is full, we need to check if - * the next one contains any additional data. - */ - if (head >= pdc->dma_size) { - pdc->ofs = 0; - UART_PUT_RNPR(port, pdc->dma_addr); - UART_PUT_RNCR(port, pdc->dma_size); - - rx_idx = !rx_idx; - atmel_port->pdc_rx_idx = rx_idx; - } - } while (head >= pdc->dma_size); - - /* - * Drop the lock here since it might end up calling - * uart_start(), which takes the lock. - */ - spin_unlock(&port->lock); - tty_flip_buffer_push(tty); - spin_lock(&port->lock); - - UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); -} - -/* - * tasklet handling tty stuff outside the interrupt handler. - */ -static void atmel_tasklet_func(unsigned long data) -{ - struct uart_port *port = (struct uart_port *)data; - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - unsigned int status; - unsigned int status_change; - - /* The interrupt handler does not take the lock */ - spin_lock(&port->lock); - - if (atmel_use_dma_tx(port)) - atmel_tx_dma(port); - else - atmel_tx_chars(port); - - status = atmel_port->irq_status; - status_change = status ^ atmel_port->irq_status_prev; - - if (status_change & (ATMEL_US_RI | ATMEL_US_DSR - | ATMEL_US_DCD | ATMEL_US_CTS)) { - /* TODO: All reads to CSR will clear these interrupts! */ - if (status_change & ATMEL_US_RI) - port->icount.rng++; - if (status_change & ATMEL_US_DSR) - port->icount.dsr++; - if (status_change & ATMEL_US_DCD) - uart_handle_dcd_change(port, !(status & ATMEL_US_DCD)); - if (status_change & ATMEL_US_CTS) - uart_handle_cts_change(port, !(status & ATMEL_US_CTS)); - - wake_up_interruptible(&port->state->port.delta_msr_wait); - - atmel_port->irq_status_prev = status; - } - - if (atmel_use_dma_rx(port)) - atmel_rx_from_dma(port); - else - atmel_rx_from_ring(port); - - spin_unlock(&port->lock); -} - -/* - * Perform initialization and enable port for reception - */ -static int atmel_startup(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - struct tty_struct *tty = port->state->port.tty; - int retval; - - /* - * Ensure that no interrupts are enabled otherwise when - * request_irq() is called we could get stuck trying to - * handle an unexpected interrupt - */ - UART_PUT_IDR(port, -1); - - /* - * Allocate the IRQ - */ - retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED, - tty ? tty->name : "atmel_serial", port); - if (retval) { - printk("atmel_serial: atmel_startup - Can't get irq\n"); - return retval; - } - - /* - * Initialize DMA (if necessary) - */ - if (atmel_use_dma_rx(port)) { - int i; - - for (i = 0; i < 2; i++) { - struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; - - pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL); - if (pdc->buf == NULL) { - if (i != 0) { - dma_unmap_single(port->dev, - atmel_port->pdc_rx[0].dma_addr, - PDC_BUFFER_SIZE, - DMA_FROM_DEVICE); - kfree(atmel_port->pdc_rx[0].buf); - } - free_irq(port->irq, port); - return -ENOMEM; - } - pdc->dma_addr = dma_map_single(port->dev, - pdc->buf, - PDC_BUFFER_SIZE, - DMA_FROM_DEVICE); - pdc->dma_size = PDC_BUFFER_SIZE; - pdc->ofs = 0; - } - - atmel_port->pdc_rx_idx = 0; - - UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr); - UART_PUT_RCR(port, PDC_BUFFER_SIZE); - - UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr); - UART_PUT_RNCR(port, PDC_BUFFER_SIZE); - } - if (atmel_use_dma_tx(port)) { - struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; - struct circ_buf *xmit = &port->state->xmit; - - pdc->buf = xmit->buf; - pdc->dma_addr = dma_map_single(port->dev, - pdc->buf, - UART_XMIT_SIZE, - DMA_TO_DEVICE); - pdc->dma_size = UART_XMIT_SIZE; - pdc->ofs = 0; - } - - /* - * If there is a specific "open" function (to register - * control line interrupts) - */ - if (atmel_open_hook) { - retval = atmel_open_hook(port); - if (retval) { - free_irq(port->irq, port); - return retval; - } - } - - /* Save current CSR for comparison in atmel_tasklet_func() */ - atmel_port->irq_status_prev = UART_GET_CSR(port); - atmel_port->irq_status = atmel_port->irq_status_prev; - - /* - * Finally, enable the serial port - */ - UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); - /* enable xmit & rcvr */ - UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); - - if (atmel_use_dma_rx(port)) { - /* set UART timeout */ - UART_PUT_RTOR(port, PDC_RX_TIMEOUT); - UART_PUT_CR(port, ATMEL_US_STTTO); - - UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); - /* enable PDC controller */ - UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); - } else { - /* enable receive only */ - UART_PUT_IER(port, ATMEL_US_RXRDY); - } - - return 0; -} - -/* - * Disable the port - */ -static void atmel_shutdown(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - /* - * Ensure everything is stopped. - */ - atmel_stop_rx(port); - atmel_stop_tx(port); - - /* - * Shut-down the DMA. - */ - if (atmel_use_dma_rx(port)) { - int i; - - for (i = 0; i < 2; i++) { - struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; - - dma_unmap_single(port->dev, - pdc->dma_addr, - pdc->dma_size, - DMA_FROM_DEVICE); - kfree(pdc->buf); - } - } - if (atmel_use_dma_tx(port)) { - struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; - - dma_unmap_single(port->dev, - pdc->dma_addr, - pdc->dma_size, - DMA_TO_DEVICE); - } - - /* - * Disable all interrupts, port and break condition. - */ - UART_PUT_CR(port, ATMEL_US_RSTSTA); - UART_PUT_IDR(port, -1); - - /* - * Free the interrupt - */ - free_irq(port->irq, port); - - /* - * If there is a specific "close" function (to unregister - * control line interrupts) - */ - if (atmel_close_hook) - atmel_close_hook(port); -} - -/* - * Flush any TX data submitted for DMA. Called when the TX circular - * buffer is reset. - */ -static void atmel_flush_buffer(struct uart_port *port) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - if (atmel_use_dma_tx(port)) { - UART_PUT_TCR(port, 0); - atmel_port->pdc_tx.ofs = 0; - } -} - -/* - * Power / Clock management. - */ -static void atmel_serial_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - switch (state) { - case 0: - /* - * Enable the peripheral clock for this serial port. - * This is called on uart_open() or a resume event. - */ - clk_enable(atmel_port->clk); - - /* re-enable interrupts if we disabled some on suspend */ - UART_PUT_IER(port, atmel_port->backup_imr); - break; - case 3: - /* Back up the interrupt mask and disable all interrupts */ - atmel_port->backup_imr = UART_GET_IMR(port); - UART_PUT_IDR(port, -1); - - /* - * Disable the peripheral clock for this serial port. - * This is called on uart_close() or a suspend event. - */ - clk_disable(atmel_port->clk); - break; - default: - printk(KERN_ERR "atmel_serial: unknown pm %d\n", state); - } -} - -/* - * Change the port parameters - */ -static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned long flags; - unsigned int mode, imr, quot, baud; - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - /* Get current mode register */ - mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL - | ATMEL_US_NBSTOP | ATMEL_US_PAR - | ATMEL_US_USMODE); - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); - quot = uart_get_divisor(port, baud); - - if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */ - quot /= 8; - mode |= ATMEL_US_USCLKS_MCK_DIV8; - } - - /* byte size */ - switch (termios->c_cflag & CSIZE) { - case CS5: - mode |= ATMEL_US_CHRL_5; - break; - case CS6: - mode |= ATMEL_US_CHRL_6; - break; - case CS7: - mode |= ATMEL_US_CHRL_7; - break; - default: - mode |= ATMEL_US_CHRL_8; - break; - } - - /* stop bits */ - if (termios->c_cflag & CSTOPB) - mode |= ATMEL_US_NBSTOP_2; - - /* parity */ - if (termios->c_cflag & PARENB) { - /* Mark or Space parity */ - if (termios->c_cflag & CMSPAR) { - if (termios->c_cflag & PARODD) - mode |= ATMEL_US_PAR_MARK; - else - mode |= ATMEL_US_PAR_SPACE; - } else if (termios->c_cflag & PARODD) - mode |= ATMEL_US_PAR_ODD; - else - mode |= ATMEL_US_PAR_EVEN; - } else - mode |= ATMEL_US_PAR_NONE; - - /* hardware handshake (RTS/CTS) */ - if (termios->c_cflag & CRTSCTS) - mode |= ATMEL_US_USMODE_HWHS; - else - mode |= ATMEL_US_USMODE_NORMAL; - - spin_lock_irqsave(&port->lock, flags); - - port->read_status_mask = ATMEL_US_OVRE; - if (termios->c_iflag & INPCK) - port->read_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE); - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= ATMEL_US_RXBRK; - - if (atmel_use_dma_rx(port)) - /* need to enable error interrupts */ - UART_PUT_IER(port, port->read_status_mask); - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE); - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= ATMEL_US_RXBRK; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= ATMEL_US_OVRE; - } - /* TODO: Ignore all characters if CREAD is set.*/ - - /* update the per-port timeout */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * save/disable interrupts. The tty layer will ensure that the - * transmitter is empty if requested by the caller, so there's - * no need to wait for it here. - */ - imr = UART_GET_IMR(port); - UART_PUT_IDR(port, -1); - - /* disable receiver and transmitter */ - UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS); - - /* Resetting serial mode to RS232 (0x0) */ - mode &= ~ATMEL_US_USMODE; - - if (atmel_port->rs485.flags & SER_RS485_ENABLED) { - dev_dbg(port->dev, "Setting UART to RS485\n"); - if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) - UART_PUT_TTGR(port, - atmel_port->rs485.delay_rts_after_send); - mode |= ATMEL_US_USMODE_RS485; - } else { - dev_dbg(port->dev, "Setting UART to RS232\n"); - } - - /* set the parity, stop bits and data size */ - UART_PUT_MR(port, mode); - - /* set the baud rate */ - UART_PUT_BRGR(port, quot); - UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); - UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); - - /* restore interrupts */ - UART_PUT_IER(port, imr); - - /* CTS flow-control and modem-status interrupts */ - if (UART_ENABLE_MS(port, termios->c_cflag)) - port->ops->enable_ms(port); - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* - * Return string describing the specified port - */ -static const char *atmel_type(struct uart_port *port) -{ - return (port->type == PORT_ATMEL) ? "ATMEL_SERIAL" : NULL; -} - -/* - * Release the memory region(s) being used by 'port'. - */ -static void atmel_release_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - int size = pdev->resource[0].end - pdev->resource[0].start + 1; - - release_mem_region(port->mapbase, size); - - if (port->flags & UPF_IOREMAP) { - iounmap(port->membase); - port->membase = NULL; - } -} - -/* - * Request the memory region(s) being used by 'port'. - */ -static int atmel_request_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - int size = pdev->resource[0].end - pdev->resource[0].start + 1; - - if (!request_mem_region(port->mapbase, size, "atmel_serial")) - return -EBUSY; - - if (port->flags & UPF_IOREMAP) { - port->membase = ioremap(port->mapbase, size); - if (port->membase == NULL) { - release_mem_region(port->mapbase, size); - return -ENOMEM; - } - } - - return 0; -} - -/* - * Configure/autoconfigure the port. - */ -static void atmel_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_ATMEL; - atmel_request_port(port); - } -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - */ -static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_ATMEL) - ret = -EINVAL; - if (port->irq != ser->irq) - ret = -EINVAL; - if (ser->io_type != SERIAL_IO_MEM) - ret = -EINVAL; - if (port->uartclk / 16 != ser->baud_base) - ret = -EINVAL; - if ((void *)port->mapbase != ser->iomem_base) - ret = -EINVAL; - if (port->iobase != ser->port) - ret = -EINVAL; - if (ser->hub6 != 0) - ret = -EINVAL; - return ret; -} - -#ifdef CONFIG_CONSOLE_POLL -static int atmel_poll_get_char(struct uart_port *port) -{ - while (!(UART_GET_CSR(port) & ATMEL_US_RXRDY)) - cpu_relax(); - - return UART_GET_CHAR(port); -} - -static void atmel_poll_put_char(struct uart_port *port, unsigned char ch) -{ - while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY)) - cpu_relax(); - - UART_PUT_CHAR(port, ch); -} -#endif - -static int -atmel_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg) -{ - struct serial_rs485 rs485conf; - - switch (cmd) { - case TIOCSRS485: - if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg, - sizeof(rs485conf))) - return -EFAULT; - - atmel_config_rs485(port, &rs485conf); - break; - - case TIOCGRS485: - if (copy_to_user((struct serial_rs485 *) arg, - &(to_atmel_uart_port(port)->rs485), - sizeof(rs485conf))) - return -EFAULT; - break; - - default: - return -ENOIOCTLCMD; - } - return 0; -} - - - -static struct uart_ops atmel_pops = { - .tx_empty = atmel_tx_empty, - .set_mctrl = atmel_set_mctrl, - .get_mctrl = atmel_get_mctrl, - .stop_tx = atmel_stop_tx, - .start_tx = atmel_start_tx, - .stop_rx = atmel_stop_rx, - .enable_ms = atmel_enable_ms, - .break_ctl = atmel_break_ctl, - .startup = atmel_startup, - .shutdown = atmel_shutdown, - .flush_buffer = atmel_flush_buffer, - .set_termios = atmel_set_termios, - .type = atmel_type, - .release_port = atmel_release_port, - .request_port = atmel_request_port, - .config_port = atmel_config_port, - .verify_port = atmel_verify_port, - .pm = atmel_serial_pm, - .ioctl = atmel_ioctl, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = atmel_poll_get_char, - .poll_put_char = atmel_poll_put_char, -#endif -}; - -/* - * Configure the port from the platform device resource info. - */ -static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, - struct platform_device *pdev) -{ - struct uart_port *port = &atmel_port->uart; - struct atmel_uart_data *data = pdev->dev.platform_data; - - port->iotype = UPIO_MEM; - port->flags = UPF_BOOT_AUTOCONF; - port->ops = &atmel_pops; - port->fifosize = 1; - port->line = pdev->id; - port->dev = &pdev->dev; - port->mapbase = pdev->resource[0].start; - port->irq = pdev->resource[1].start; - - tasklet_init(&atmel_port->tasklet, atmel_tasklet_func, - (unsigned long)port); - - memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring)); - - if (data->regs) - /* Already mapped by setup code */ - port->membase = data->regs; - else { - port->flags |= UPF_IOREMAP; - port->membase = NULL; - } - - /* for console, the clock could already be configured */ - if (!atmel_port->clk) { - atmel_port->clk = clk_get(&pdev->dev, "usart"); - clk_enable(atmel_port->clk); - port->uartclk = clk_get_rate(atmel_port->clk); - clk_disable(atmel_port->clk); - /* only enable clock when USART is in use */ - } - - atmel_port->use_dma_rx = data->use_dma_rx; - atmel_port->use_dma_tx = data->use_dma_tx; - atmel_port->rs485 = data->rs485; - /* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */ - if (atmel_port->rs485.flags & SER_RS485_ENABLED) - atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; - else if (atmel_use_dma_tx(port)) { - port->fifosize = PDC_BUFFER_SIZE; - atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE; - } else { - atmel_port->tx_done_mask = ATMEL_US_TXRDY; - } -} - -/* - * Register board-specific modem-control line handlers. - */ -void __init atmel_register_uart_fns(struct atmel_port_fns *fns) -{ - if (fns->enable_ms) - atmel_pops.enable_ms = fns->enable_ms; - if (fns->get_mctrl) - atmel_pops.get_mctrl = fns->get_mctrl; - if (fns->set_mctrl) - atmel_pops.set_mctrl = fns->set_mctrl; - atmel_open_hook = fns->open; - atmel_close_hook = fns->close; - atmel_pops.pm = fns->pm; - atmel_pops.set_wake = fns->set_wake; -} - -#ifdef CONFIG_SERIAL_ATMEL_CONSOLE -static void atmel_console_putchar(struct uart_port *port, int ch) -{ - while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY)) - cpu_relax(); - UART_PUT_CHAR(port, ch); -} - -/* - * Interrupts are disabled on entering - */ -static void atmel_console_write(struct console *co, const char *s, u_int count) -{ - struct uart_port *port = &atmel_ports[co->index].uart; - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - unsigned int status, imr; - unsigned int pdc_tx; - - /* - * First, save IMR and then disable interrupts - */ - imr = UART_GET_IMR(port); - UART_PUT_IDR(port, ATMEL_US_RXRDY | atmel_port->tx_done_mask); - - /* Store PDC transmit status and disable it */ - pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN; - UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); - - uart_console_write(port, s, count, atmel_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore IMR - */ - do { - status = UART_GET_CSR(port); - } while (!(status & ATMEL_US_TXRDY)); - - /* Restore PDC transmit status */ - if (pdc_tx) - UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); - - /* set interrupts back the way they were */ - UART_PUT_IER(port, imr); -} - -/* - * If the port was already initialised (eg, by a boot loader), - * try to determine the current setup. - */ -static void __init atmel_console_get_options(struct uart_port *port, int *baud, - int *parity, int *bits) -{ - unsigned int mr, quot; - - /* - * If the baud rate generator isn't running, the port wasn't - * initialized by the boot loader. - */ - quot = UART_GET_BRGR(port) & ATMEL_US_CD; - if (!quot) - return; - - mr = UART_GET_MR(port) & ATMEL_US_CHRL; - if (mr == ATMEL_US_CHRL_8) - *bits = 8; - else - *bits = 7; - - mr = UART_GET_MR(port) & ATMEL_US_PAR; - if (mr == ATMEL_US_PAR_EVEN) - *parity = 'e'; - else if (mr == ATMEL_US_PAR_ODD) - *parity = 'o'; - - /* - * The serial core only rounds down when matching this to a - * supported baud rate. Make sure we don't end up slightly - * lower than one of those, as it would make us fall through - * to a much lower baud rate than we really want. - */ - *baud = port->uartclk / (16 * (quot - 1)); -} - -static int __init atmel_console_setup(struct console *co, char *options) -{ - struct uart_port *port = &atmel_ports[co->index].uart; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (port->membase == NULL) { - /* Port not initialized yet - delay setup */ - return -ENODEV; - } - - clk_enable(atmel_ports[co->index].clk); - - UART_PUT_IDR(port, -1); - UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); - UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - atmel_console_get_options(port, &baud, &parity, &bits); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver atmel_uart; - -static struct console atmel_console = { - .name = ATMEL_DEVICENAME, - .write = atmel_console_write, - .device = uart_console_device, - .setup = atmel_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &atmel_uart, -}; - -#define ATMEL_CONSOLE_DEVICE (&atmel_console) - -/* - * Early console initialization (before VM subsystem initialized). - */ -static int __init atmel_console_init(void) -{ - if (atmel_default_console_device) { - add_preferred_console(ATMEL_DEVICENAME, - atmel_default_console_device->id, NULL); - atmel_init_port(&atmel_ports[atmel_default_console_device->id], - atmel_default_console_device); - register_console(&atmel_console); - } - - return 0; -} - -console_initcall(atmel_console_init); - -/* - * Late console initialization. - */ -static int __init atmel_late_console_init(void) -{ - if (atmel_default_console_device - && !(atmel_console.flags & CON_ENABLED)) - register_console(&atmel_console); - - return 0; -} - -core_initcall(atmel_late_console_init); - -static inline bool atmel_is_console_port(struct uart_port *port) -{ - return port->cons && port->cons->index == port->line; -} - -#else -#define ATMEL_CONSOLE_DEVICE NULL - -static inline bool atmel_is_console_port(struct uart_port *port) -{ - return false; -} -#endif - -static struct uart_driver atmel_uart = { - .owner = THIS_MODULE, - .driver_name = "atmel_serial", - .dev_name = ATMEL_DEVICENAME, - .major = SERIAL_ATMEL_MAJOR, - .minor = MINOR_START, - .nr = ATMEL_MAX_UART, - .cons = ATMEL_CONSOLE_DEVICE, -}; - -#ifdef CONFIG_PM -static bool atmel_serial_clk_will_stop(void) -{ -#ifdef CONFIG_ARCH_AT91 - return at91_suspend_entering_slow_clock(); -#else - return false; -#endif -} - -static int atmel_serial_suspend(struct platform_device *pdev, - pm_message_t state) -{ - struct uart_port *port = platform_get_drvdata(pdev); - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - if (atmel_is_console_port(port) && console_suspend_enabled) { - /* Drain the TX shifter */ - while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY)) - cpu_relax(); - } - - /* we can not wake up if we're running on slow clock */ - atmel_port->may_wakeup = device_may_wakeup(&pdev->dev); - if (atmel_serial_clk_will_stop()) - device_set_wakeup_enable(&pdev->dev, 0); - - uart_suspend_port(&atmel_uart, port); - - return 0; -} - -static int atmel_serial_resume(struct platform_device *pdev) -{ - struct uart_port *port = platform_get_drvdata(pdev); - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - - uart_resume_port(&atmel_uart, port); - device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup); - - return 0; -} -#else -#define atmel_serial_suspend NULL -#define atmel_serial_resume NULL -#endif - -static int __devinit atmel_serial_probe(struct platform_device *pdev) -{ - struct atmel_uart_port *port; - void *data; - int ret; - - BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); - - port = &atmel_ports[pdev->id]; - port->backup_imr = 0; - - atmel_init_port(port, pdev); - - if (!atmel_use_dma_rx(&port->uart)) { - ret = -ENOMEM; - data = kmalloc(sizeof(struct atmel_uart_char) - * ATMEL_SERIAL_RINGSIZE, GFP_KERNEL); - if (!data) - goto err_alloc_ring; - port->rx_ring.buf = data; - } - - ret = uart_add_one_port(&atmel_uart, &port->uart); - if (ret) - goto err_add_port; - -#ifdef CONFIG_SERIAL_ATMEL_CONSOLE - if (atmel_is_console_port(&port->uart) - && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) { - /* - * The serial core enabled the clock for us, so undo - * the clk_enable() in atmel_console_setup() - */ - clk_disable(port->clk); - } -#endif - - device_init_wakeup(&pdev->dev, 1); - platform_set_drvdata(pdev, port); - - return 0; - -err_add_port: - kfree(port->rx_ring.buf); - port->rx_ring.buf = NULL; -err_alloc_ring: - if (!atmel_is_console_port(&port->uart)) { - clk_put(port->clk); - port->clk = NULL; - } - - return ret; -} - -static int __devexit atmel_serial_remove(struct platform_device *pdev) -{ - struct uart_port *port = platform_get_drvdata(pdev); - struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - int ret = 0; - - device_init_wakeup(&pdev->dev, 0); - platform_set_drvdata(pdev, NULL); - - ret = uart_remove_one_port(&atmel_uart, port); - - tasklet_kill(&atmel_port->tasklet); - kfree(atmel_port->rx_ring.buf); - - /* "port" is allocated statically, so we shouldn't free it */ - - clk_put(atmel_port->clk); - - return ret; -} - -static struct platform_driver atmel_serial_driver = { - .probe = atmel_serial_probe, - .remove = __devexit_p(atmel_serial_remove), - .suspend = atmel_serial_suspend, - .resume = atmel_serial_resume, - .driver = { - .name = "atmel_usart", - .owner = THIS_MODULE, - }, -}; - -static int __init atmel_serial_init(void) -{ - int ret; - - ret = uart_register_driver(&atmel_uart); - if (ret) - return ret; - - ret = platform_driver_register(&atmel_serial_driver); - if (ret) - uart_unregister_driver(&atmel_uart); - - return ret; -} - -static void __exit atmel_serial_exit(void) -{ - platform_driver_unregister(&atmel_serial_driver); - uart_unregister_driver(&atmel_uart); -} - -module_init(atmel_serial_init); -module_exit(atmel_serial_exit); - -MODULE_AUTHOR("Rick Bronson"); -MODULE_DESCRIPTION("Atmel AT91 / AT32 serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:atmel_usart"); diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c deleted file mode 100644 index a1a0e55d0807..000000000000 --- a/drivers/serial/bcm63xx_uart.c +++ /dev/null @@ -1,891 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Derived from many drivers using generic_serial interface. - * - * Copyright (C) 2008 Maxime Bizon - * - * Serial driver for BCM63xx integrated UART. - * - * Hardware flow control was _not_ tested since I only have RX/TX on - * my board. - */ - -#if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#define BCM63XX_NR_UARTS 2 - -static struct uart_port ports[BCM63XX_NR_UARTS]; - -/* - * rx interrupt mask / stat - * - * mask: - * - rx fifo full - * - rx fifo above threshold - * - rx fifo not empty for too long - */ -#define UART_RX_INT_MASK (UART_IR_MASK(UART_IR_RXOVER) | \ - UART_IR_MASK(UART_IR_RXTHRESH) | \ - UART_IR_MASK(UART_IR_RXTIMEOUT)) - -#define UART_RX_INT_STAT (UART_IR_STAT(UART_IR_RXOVER) | \ - UART_IR_STAT(UART_IR_RXTHRESH) | \ - UART_IR_STAT(UART_IR_RXTIMEOUT)) - -/* - * tx interrupt mask / stat - * - * mask: - * - tx fifo empty - * - tx fifo below threshold - */ -#define UART_TX_INT_MASK (UART_IR_MASK(UART_IR_TXEMPTY) | \ - UART_IR_MASK(UART_IR_TXTRESH)) - -#define UART_TX_INT_STAT (UART_IR_STAT(UART_IR_TXEMPTY) | \ - UART_IR_STAT(UART_IR_TXTRESH)) - -/* - * external input interrupt - * - * mask: any edge on CTS, DCD - */ -#define UART_EXTINP_INT_MASK (UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \ - UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD)) - -/* - * handy uart register accessor - */ -static inline unsigned int bcm_uart_readl(struct uart_port *port, - unsigned int offset) -{ - return bcm_readl(port->membase + offset); -} - -static inline void bcm_uart_writel(struct uart_port *port, - unsigned int value, unsigned int offset) -{ - bcm_writel(value, port->membase + offset); -} - -/* - * serial core request to check if uart tx fifo is empty - */ -static unsigned int bcm_uart_tx_empty(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_IR_REG); - return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0; -} - -/* - * serial core request to set RTS and DTR pin state and loopback mode - */ -static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_MCTL_REG); - val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK); - /* invert of written value is reflected on the pin */ - if (!(mctrl & TIOCM_DTR)) - val |= UART_MCTL_DTR_MASK; - if (!(mctrl & TIOCM_RTS)) - val |= UART_MCTL_RTS_MASK; - bcm_uart_writel(port, val, UART_MCTL_REG); - - val = bcm_uart_readl(port, UART_CTL_REG); - if (mctrl & TIOCM_LOOP) - val |= UART_CTL_LOOPBACK_MASK; - else - val &= ~UART_CTL_LOOPBACK_MASK; - bcm_uart_writel(port, val, UART_CTL_REG); -} - -/* - * serial core request to return RI, CTS, DCD and DSR pin state - */ -static unsigned int bcm_uart_get_mctrl(struct uart_port *port) -{ - unsigned int val, mctrl; - - mctrl = 0; - val = bcm_uart_readl(port, UART_EXTINP_REG); - if (val & UART_EXTINP_RI_MASK) - mctrl |= TIOCM_RI; - if (val & UART_EXTINP_CTS_MASK) - mctrl |= TIOCM_CTS; - if (val & UART_EXTINP_DCD_MASK) - mctrl |= TIOCM_CD; - if (val & UART_EXTINP_DSR_MASK) - mctrl |= TIOCM_DSR; - return mctrl; -} - -/* - * serial core request to disable tx ASAP (used for flow control) - */ -static void bcm_uart_stop_tx(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_CTL_REG); - val &= ~(UART_CTL_TXEN_MASK); - bcm_uart_writel(port, val, UART_CTL_REG); - - val = bcm_uart_readl(port, UART_IR_REG); - val &= ~UART_TX_INT_MASK; - bcm_uart_writel(port, val, UART_IR_REG); -} - -/* - * serial core request to (re)enable tx - */ -static void bcm_uart_start_tx(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_IR_REG); - val |= UART_TX_INT_MASK; - bcm_uart_writel(port, val, UART_IR_REG); - - val = bcm_uart_readl(port, UART_CTL_REG); - val |= UART_CTL_TXEN_MASK; - bcm_uart_writel(port, val, UART_CTL_REG); -} - -/* - * serial core request to stop rx, called before port shutdown - */ -static void bcm_uart_stop_rx(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_IR_REG); - val &= ~UART_RX_INT_MASK; - bcm_uart_writel(port, val, UART_IR_REG); -} - -/* - * serial core request to enable modem status interrupt reporting - */ -static void bcm_uart_enable_ms(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_IR_REG); - val |= UART_IR_MASK(UART_IR_EXTIP); - bcm_uart_writel(port, val, UART_IR_REG); -} - -/* - * serial core request to start/stop emitting break char - */ -static void bcm_uart_break_ctl(struct uart_port *port, int ctl) -{ - unsigned long flags; - unsigned int val; - - spin_lock_irqsave(&port->lock, flags); - - val = bcm_uart_readl(port, UART_CTL_REG); - if (ctl) - val |= UART_CTL_XMITBRK_MASK; - else - val &= ~UART_CTL_XMITBRK_MASK; - bcm_uart_writel(port, val, UART_CTL_REG); - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* - * return port type in string format - */ -static const char *bcm_uart_type(struct uart_port *port) -{ - return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL; -} - -/* - * read all chars in rx fifo and send them to core - */ -static void bcm_uart_do_rx(struct uart_port *port) -{ - struct tty_struct *tty; - unsigned int max_count; - - /* limit number of char read in interrupt, should not be - * higher than fifo size anyway since we're much faster than - * serial port */ - max_count = 32; - tty = port->state->port.tty; - do { - unsigned int iestat, c, cstat; - char flag; - - /* get overrun/fifo empty information from ier - * register */ - iestat = bcm_uart_readl(port, UART_IR_REG); - if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY))) - break; - - cstat = c = bcm_uart_readl(port, UART_FIFO_REG); - port->icount.rx++; - flag = TTY_NORMAL; - c &= 0xff; - - if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) { - /* do stats first */ - if (cstat & UART_FIFO_BRKDET_MASK) { - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } - - if (cstat & UART_FIFO_PARERR_MASK) - port->icount.parity++; - if (cstat & UART_FIFO_FRAMEERR_MASK) - port->icount.frame++; - - /* update flag wrt read_status_mask */ - cstat &= port->read_status_mask; - if (cstat & UART_FIFO_BRKDET_MASK) - flag = TTY_BREAK; - if (cstat & UART_FIFO_FRAMEERR_MASK) - flag = TTY_FRAME; - if (cstat & UART_FIFO_PARERR_MASK) - flag = TTY_PARITY; - } - - if (uart_handle_sysrq_char(port, c)) - continue; - - if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) { - port->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - - if ((cstat & port->ignore_status_mask) == 0) - tty_insert_flip_char(tty, c, flag); - - } while (--max_count); - - tty_flip_buffer_push(tty); -} - -/* - * fill tx fifo with chars to send, stop when fifo is about to be full - * or when all chars have been sent. - */ -static void bcm_uart_do_tx(struct uart_port *port) -{ - struct circ_buf *xmit; - unsigned int val, max_count; - - if (port->x_char) { - bcm_uart_writel(port, port->x_char, UART_FIFO_REG); - port->icount.tx++; - port->x_char = 0; - return; - } - - if (uart_tx_stopped(port)) { - bcm_uart_stop_tx(port); - return; - } - - xmit = &port->state->xmit; - if (uart_circ_empty(xmit)) - goto txq_empty; - - val = bcm_uart_readl(port, UART_MCTL_REG); - val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT; - max_count = port->fifosize - val; - - while (max_count--) { - unsigned int c; - - c = xmit->buf[xmit->tail]; - bcm_uart_writel(port, c, UART_FIFO_REG); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - goto txq_empty; - return; - -txq_empty: - /* nothing to send, disable transmit interrupt */ - val = bcm_uart_readl(port, UART_IR_REG); - val &= ~UART_TX_INT_MASK; - bcm_uart_writel(port, val, UART_IR_REG); - return; -} - -/* - * process uart interrupt - */ -static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id) -{ - struct uart_port *port; - unsigned int irqstat; - - port = dev_id; - spin_lock(&port->lock); - - irqstat = bcm_uart_readl(port, UART_IR_REG); - if (irqstat & UART_RX_INT_STAT) - bcm_uart_do_rx(port); - - if (irqstat & UART_TX_INT_STAT) - bcm_uart_do_tx(port); - - if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) { - unsigned int estat; - - estat = bcm_uart_readl(port, UART_EXTINP_REG); - if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS)) - uart_handle_cts_change(port, - estat & UART_EXTINP_CTS_MASK); - if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD)) - uart_handle_dcd_change(port, - estat & UART_EXTINP_DCD_MASK); - } - - spin_unlock(&port->lock); - return IRQ_HANDLED; -} - -/* - * enable rx & tx operation on uart - */ -static void bcm_uart_enable(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_CTL_REG); - val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); - bcm_uart_writel(port, val, UART_CTL_REG); -} - -/* - * disable rx & tx operation on uart - */ -static void bcm_uart_disable(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_CTL_REG); - val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | - UART_CTL_RXEN_MASK); - bcm_uart_writel(port, val, UART_CTL_REG); -} - -/* - * clear all unread data in rx fifo and unsent data in tx fifo - */ -static void bcm_uart_flush(struct uart_port *port) -{ - unsigned int val; - - /* empty rx and tx fifo */ - val = bcm_uart_readl(port, UART_CTL_REG); - val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK; - bcm_uart_writel(port, val, UART_CTL_REG); - - /* read any pending char to make sure all irq status are - * cleared */ - (void)bcm_uart_readl(port, UART_FIFO_REG); -} - -/* - * serial core request to initialize uart and start rx operation - */ -static int bcm_uart_startup(struct uart_port *port) -{ - unsigned int val; - int ret; - - /* mask all irq and flush port */ - bcm_uart_disable(port); - bcm_uart_writel(port, 0, UART_IR_REG); - bcm_uart_flush(port); - - /* clear any pending external input interrupt */ - (void)bcm_uart_readl(port, UART_EXTINP_REG); - - /* set rx/tx fifo thresh to fifo half size */ - val = bcm_uart_readl(port, UART_MCTL_REG); - val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK); - val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT; - val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT; - bcm_uart_writel(port, val, UART_MCTL_REG); - - /* set rx fifo timeout to 1 char time */ - val = bcm_uart_readl(port, UART_CTL_REG); - val &= ~UART_CTL_RXTMOUTCNT_MASK; - val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT; - bcm_uart_writel(port, val, UART_CTL_REG); - - /* report any edge on dcd and cts */ - val = UART_EXTINP_INT_MASK; - val |= UART_EXTINP_DCD_NOSENSE_MASK; - val |= UART_EXTINP_CTS_NOSENSE_MASK; - bcm_uart_writel(port, val, UART_EXTINP_REG); - - /* register irq and enable rx interrupts */ - ret = request_irq(port->irq, bcm_uart_interrupt, 0, - bcm_uart_type(port), port); - if (ret) - return ret; - bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG); - bcm_uart_enable(port); - return 0; -} - -/* - * serial core request to flush & disable uart - */ -static void bcm_uart_shutdown(struct uart_port *port) -{ - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - bcm_uart_writel(port, 0, UART_IR_REG); - spin_unlock_irqrestore(&port->lock, flags); - - bcm_uart_disable(port); - bcm_uart_flush(port); - free_irq(port->irq, port); -} - -/* - * serial core request to change current uart setting - */ -static void bcm_uart_set_termios(struct uart_port *port, - struct ktermios *new, - struct ktermios *old) -{ - unsigned int ctl, baud, quot, ier; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - - /* disable uart while changing speed */ - bcm_uart_disable(port); - bcm_uart_flush(port); - - /* update Control register */ - ctl = bcm_uart_readl(port, UART_CTL_REG); - ctl &= ~UART_CTL_BITSPERSYM_MASK; - - switch (new->c_cflag & CSIZE) { - case CS5: - ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT); - break; - case CS6: - ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT); - break; - case CS7: - ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT); - break; - default: - ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT); - break; - } - - ctl &= ~UART_CTL_STOPBITS_MASK; - if (new->c_cflag & CSTOPB) - ctl |= UART_CTL_STOPBITS_2; - else - ctl |= UART_CTL_STOPBITS_1; - - ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK); - if (new->c_cflag & PARENB) - ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK); - ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK); - if (new->c_cflag & PARODD) - ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK); - bcm_uart_writel(port, ctl, UART_CTL_REG); - - /* update Baudword register */ - baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); - quot = uart_get_divisor(port, baud) - 1; - bcm_uart_writel(port, quot, UART_BAUD_REG); - - /* update Interrupt register */ - ier = bcm_uart_readl(port, UART_IR_REG); - - ier &= ~UART_IR_MASK(UART_IR_EXTIP); - if (UART_ENABLE_MS(port, new->c_cflag)) - ier |= UART_IR_MASK(UART_IR_EXTIP); - - bcm_uart_writel(port, ier, UART_IR_REG); - - /* update read/ignore mask */ - port->read_status_mask = UART_FIFO_VALID_MASK; - if (new->c_iflag & INPCK) { - port->read_status_mask |= UART_FIFO_FRAMEERR_MASK; - port->read_status_mask |= UART_FIFO_PARERR_MASK; - } - if (new->c_iflag & (BRKINT)) - port->read_status_mask |= UART_FIFO_BRKDET_MASK; - - port->ignore_status_mask = 0; - if (new->c_iflag & IGNPAR) - port->ignore_status_mask |= UART_FIFO_PARERR_MASK; - if (new->c_iflag & IGNBRK) - port->ignore_status_mask |= UART_FIFO_BRKDET_MASK; - if (!(new->c_cflag & CREAD)) - port->ignore_status_mask |= UART_FIFO_VALID_MASK; - - uart_update_timeout(port, new->c_cflag, baud); - bcm_uart_enable(port); - spin_unlock_irqrestore(&port->lock, flags); -} - -/* - * serial core request to claim uart iomem - */ -static int bcm_uart_request_port(struct uart_port *port) -{ - unsigned int size; - - size = RSET_UART_SIZE; - if (!request_mem_region(port->mapbase, size, "bcm63xx")) { - dev_err(port->dev, "Memory region busy\n"); - return -EBUSY; - } - - port->membase = ioremap(port->mapbase, size); - if (!port->membase) { - dev_err(port->dev, "Unable to map registers\n"); - release_mem_region(port->mapbase, size); - return -EBUSY; - } - return 0; -} - -/* - * serial core request to release uart iomem - */ -static void bcm_uart_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, RSET_UART_SIZE); - iounmap(port->membase); -} - -/* - * serial core request to do any port required autoconfiguration - */ -static void bcm_uart_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - if (bcm_uart_request_port(port)) - return; - port->type = PORT_BCM63XX; - } -} - -/* - * serial core request to check that port information in serinfo are - * suitable - */ -static int bcm_uart_verify_port(struct uart_port *port, - struct serial_struct *serinfo) -{ - if (port->type != PORT_BCM63XX) - return -EINVAL; - if (port->irq != serinfo->irq) - return -EINVAL; - if (port->iotype != serinfo->io_type) - return -EINVAL; - if (port->mapbase != (unsigned long)serinfo->iomem_base) - return -EINVAL; - return 0; -} - -/* serial core callbacks */ -static struct uart_ops bcm_uart_ops = { - .tx_empty = bcm_uart_tx_empty, - .get_mctrl = bcm_uart_get_mctrl, - .set_mctrl = bcm_uart_set_mctrl, - .start_tx = bcm_uart_start_tx, - .stop_tx = bcm_uart_stop_tx, - .stop_rx = bcm_uart_stop_rx, - .enable_ms = bcm_uart_enable_ms, - .break_ctl = bcm_uart_break_ctl, - .startup = bcm_uart_startup, - .shutdown = bcm_uart_shutdown, - .set_termios = bcm_uart_set_termios, - .type = bcm_uart_type, - .release_port = bcm_uart_release_port, - .request_port = bcm_uart_request_port, - .config_port = bcm_uart_config_port, - .verify_port = bcm_uart_verify_port, -}; - - - -#ifdef CONFIG_SERIAL_BCM63XX_CONSOLE -static inline void wait_for_xmitr(struct uart_port *port) -{ - unsigned int tmout; - - /* Wait up to 10ms for the character(s) to be sent. */ - tmout = 10000; - while (--tmout) { - unsigned int val; - - val = bcm_uart_readl(port, UART_IR_REG); - if (val & UART_IR_STAT(UART_IR_TXEMPTY)) - break; - udelay(1); - } - - /* Wait up to 1s for flow control if necessary */ - if (port->flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout) { - unsigned int val; - - val = bcm_uart_readl(port, UART_EXTINP_REG); - if (val & UART_EXTINP_CTS_MASK) - break; - udelay(1); - } - } -} - -/* - * output given char - */ -static void bcm_console_putchar(struct uart_port *port, int ch) -{ - wait_for_xmitr(port); - bcm_uart_writel(port, ch, UART_FIFO_REG); -} - -/* - * console core request to output given string - */ -static void bcm_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_port *port; - unsigned long flags; - int locked; - - port = &ports[co->index]; - - local_irq_save(flags); - if (port->sysrq) { - /* bcm_uart_interrupt() already took the lock */ - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&port->lock); - } else { - spin_lock(&port->lock); - locked = 1; - } - - /* call helper to deal with \r\n */ - uart_console_write(port, s, count, bcm_console_putchar); - - /* and wait for char to be transmitted */ - wait_for_xmitr(port); - - if (locked) - spin_unlock(&port->lock); - local_irq_restore(flags); -} - -/* - * console core request to setup given console, find matching uart - * port and setup it. - */ -static int bcm_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index < 0 || co->index >= BCM63XX_NR_UARTS) - return -EINVAL; - port = &ports[co->index]; - if (!port->membase) - return -ENODEV; - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver bcm_uart_driver; - -static struct console bcm63xx_console = { - .name = "ttyS", - .write = bcm_console_write, - .device = uart_console_device, - .setup = bcm_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &bcm_uart_driver, -}; - -static int __init bcm63xx_console_init(void) -{ - register_console(&bcm63xx_console); - return 0; -} - -console_initcall(bcm63xx_console_init); - -#define BCM63XX_CONSOLE (&bcm63xx_console) -#else -#define BCM63XX_CONSOLE NULL -#endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */ - -static struct uart_driver bcm_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "bcm63xx_uart", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = BCM63XX_NR_UARTS, - .cons = BCM63XX_CONSOLE, -}; - -/* - * platform driver probe/remove callback - */ -static int __devinit bcm_uart_probe(struct platform_device *pdev) -{ - struct resource *res_mem, *res_irq; - struct uart_port *port; - struct clk *clk; - int ret; - - if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS) - return -EINVAL; - - if (ports[pdev->id].membase) - return -EBUSY; - - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res_mem) - return -ENODEV; - - res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res_irq) - return -ENODEV; - - clk = clk_get(&pdev->dev, "periph"); - if (IS_ERR(clk)) - return -ENODEV; - - port = &ports[pdev->id]; - memset(port, 0, sizeof(*port)); - port->iotype = UPIO_MEM; - port->mapbase = res_mem->start; - port->irq = res_irq->start; - port->ops = &bcm_uart_ops; - port->flags = UPF_BOOT_AUTOCONF; - port->dev = &pdev->dev; - port->fifosize = 16; - port->uartclk = clk_get_rate(clk) / 2; - port->line = pdev->id; - clk_put(clk); - - ret = uart_add_one_port(&bcm_uart_driver, port); - if (ret) { - ports[pdev->id].membase = 0; - return ret; - } - platform_set_drvdata(pdev, port); - return 0; -} - -static int __devexit bcm_uart_remove(struct platform_device *pdev) -{ - struct uart_port *port; - - port = platform_get_drvdata(pdev); - uart_remove_one_port(&bcm_uart_driver, port); - platform_set_drvdata(pdev, NULL); - /* mark port as free */ - ports[pdev->id].membase = 0; - return 0; -} - -/* - * platform driver stuff - */ -static struct platform_driver bcm_uart_platform_driver = { - .probe = bcm_uart_probe, - .remove = __devexit_p(bcm_uart_remove), - .driver = { - .owner = THIS_MODULE, - .name = "bcm63xx_uart", - }, -}; - -static int __init bcm_uart_init(void) -{ - int ret; - - ret = uart_register_driver(&bcm_uart_driver); - if (ret) - return ret; - - ret = platform_driver_register(&bcm_uart_platform_driver); - if (ret) - uart_unregister_driver(&bcm_uart_driver); - - return ret; -} - -static void __exit bcm_uart_exit(void) -{ - platform_driver_unregister(&bcm_uart_platform_driver); - uart_unregister_driver(&bcm_uart_driver); -} - -module_init(bcm_uart_init); -module_exit(bcm_uart_exit); - -MODULE_AUTHOR("Maxime Bizon "); -MODULE_DESCRIPTION("Broadcom 63 -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define port_membase(uart) (((struct bfin_serial_port *)(uart))->port.membase) -#define get_lsr_cache(uart) (((struct bfin_serial_port *)(uart))->lsr) -#define put_lsr_cache(uart, v) (((struct bfin_serial_port *)(uart))->lsr = (v)) -#include - -#ifdef CONFIG_SERIAL_BFIN_MODULE -# undef CONFIG_EARLY_PRINTK -#endif - -#ifdef CONFIG_SERIAL_BFIN_MODULE -# undef CONFIG_EARLY_PRINTK -#endif - -/* UART name and device definitions */ -#define BFIN_SERIAL_DEV_NAME "ttyBF" -#define BFIN_SERIAL_MAJOR 204 -#define BFIN_SERIAL_MINOR 64 - -static struct bfin_serial_port *bfin_serial_ports[BFIN_UART_NR_PORTS]; - -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - -# ifndef CONFIG_SERIAL_BFIN_PIO -# error KGDB only support UART in PIO mode. -# endif - -static int kgdboc_port_line; -static int kgdboc_break_enabled; -#endif -/* - * Setup for console. Argument comes from the menuconfig - */ -#define DMA_RX_XCOUNT 512 -#define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) - -#define DMA_RX_FLUSH_JIFFIES (HZ / 50) - -#ifdef CONFIG_SERIAL_BFIN_DMA -static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); -#else -static void bfin_serial_tx_chars(struct bfin_serial_port *uart); -#endif - -static void bfin_serial_reset_irda(struct uart_port *port); - -#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ - defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) -static unsigned int bfin_serial_get_mctrl(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - if (uart->cts_pin < 0) - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - - /* CTS PIN is negative assertive. */ - if (UART_GET_CTS(uart)) - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - else - return TIOCM_DSR | TIOCM_CAR; -} - -static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - if (uart->rts_pin < 0) - return; - - /* RTS PIN is negative assertive. */ - if (mctrl & TIOCM_RTS) - UART_ENABLE_RTS(uart); - else - UART_DISABLE_RTS(uart); -} - -/* - * Handle any change of modem status signal. - */ -static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - unsigned int status; - - status = bfin_serial_get_mctrl(&uart->port); - uart_handle_cts_change(&uart->port, status & TIOCM_CTS); -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - uart->scts = 1; - UART_CLEAR_SCTS(uart); - UART_CLEAR_IER(uart, EDSSI); -#endif - - return IRQ_HANDLED; -} -#else -static unsigned int bfin_serial_get_mctrl(struct uart_port *port) -{ - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; -} - -static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} -#endif - -/* - * interrupts are disabled on entry - */ -static void bfin_serial_stop_tx(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; -#ifdef CONFIG_SERIAL_BFIN_DMA - struct circ_buf *xmit = &uart->port.state->xmit; -#endif - - while (!(UART_GET_LSR(uart) & TEMT)) - cpu_relax(); - -#ifdef CONFIG_SERIAL_BFIN_DMA - disable_dma(uart->tx_dma_channel); - xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx += uart->tx_count; - uart->tx_count = 0; - uart->tx_done = 1; -#else -#ifdef CONFIG_BF54x - /* Clear TFI bit */ - UART_PUT_LSR(uart, TFI); -#endif - UART_CLEAR_IER(uart, ETBEI); -#endif -} - -/* - * port is locked and interrupts are disabled - */ -static void bfin_serial_start_tx(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - struct tty_struct *tty = uart->port.state->port.tty; - -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { - uart->scts = 0; - uart_handle_cts_change(&uart->port, uart->scts); - } -#endif - - /* - * To avoid losting RX interrupt, we reset IR function - * before sending data. - */ - if (tty->termios->c_line == N_IRDA) - bfin_serial_reset_irda(port); - -#ifdef CONFIG_SERIAL_BFIN_DMA - if (uart->tx_done) - bfin_serial_dma_tx_chars(uart); -#else - UART_SET_IER(uart, ETBEI); - bfin_serial_tx_chars(uart); -#endif -} - -/* - * Interrupts are enabled - */ -static void bfin_serial_stop_rx(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - UART_CLEAR_IER(uart, ERBFI); -} - -/* - * Set the modem control timer to fire immediately. - */ -static void bfin_serial_enable_ms(struct uart_port *port) -{ -} - - -#if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO) -# define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold) -# define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v)) -#else -# define UART_GET_ANOMALY_THRESHOLD(uart) 0 -# define UART_SET_ANOMALY_THRESHOLD(uart, v) -#endif - -#ifdef CONFIG_SERIAL_BFIN_PIO -static void bfin_serial_rx_chars(struct bfin_serial_port *uart) -{ - struct tty_struct *tty = NULL; - unsigned int status, ch, flg; - static struct timeval anomaly_start = { .tv_sec = 0 }; - - status = UART_GET_LSR(uart); - UART_CLEAR_LSR(uart); - - ch = UART_GET_CHAR(uart); - uart->port.icount.rx++; - -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - if (kgdb_connected && kgdboc_port_line == uart->port.line - && kgdboc_break_enabled) - if (ch == 0x3) {/* Ctrl + C */ - kgdb_breakpoint(); - return; - } - - if (!uart->port.state || !uart->port.state->port.tty) - return; -#endif - tty = uart->port.state->port.tty; - - if (ANOMALY_05000363) { - /* The BF533 (and BF561) family of processors have a nice anomaly - * where they continuously generate characters for a "single" break. - * We have to basically ignore this flood until the "next" valid - * character comes across. Due to the nature of the flood, it is - * not possible to reliably catch bytes that are sent too quickly - * after this break. So application code talking to the Blackfin - * which sends a break signal must allow at least 1.5 character - * times after the end of the break for things to stabilize. This - * timeout was picked as it must absolutely be larger than 1 - * character time +/- some percent. So 1.5 sounds good. All other - * Blackfin families operate properly. Woo. - */ - if (anomaly_start.tv_sec) { - struct timeval curr; - suseconds_t usecs; - - if ((~ch & (~ch + 1)) & 0xff) - goto known_good_char; - - do_gettimeofday(&curr); - if (curr.tv_sec - anomaly_start.tv_sec > 1) - goto known_good_char; - - usecs = 0; - if (curr.tv_sec != anomaly_start.tv_sec) - usecs += USEC_PER_SEC; - usecs += curr.tv_usec - anomaly_start.tv_usec; - - if (usecs > UART_GET_ANOMALY_THRESHOLD(uart)) - goto known_good_char; - - if (ch) - anomaly_start.tv_sec = 0; - else - anomaly_start = curr; - - return; - - known_good_char: - status &= ~BI; - anomaly_start.tv_sec = 0; - } - } - - if (status & BI) { - if (ANOMALY_05000363) - if (bfin_revid() < 5) - do_gettimeofday(&anomaly_start); - uart->port.icount.brk++; - if (uart_handle_break(&uart->port)) - goto ignore_char; - status &= ~(PE | FE); - } - if (status & PE) - uart->port.icount.parity++; - if (status & OE) - uart->port.icount.overrun++; - if (status & FE) - uart->port.icount.frame++; - - status &= uart->port.read_status_mask; - - if (status & BI) - flg = TTY_BREAK; - else if (status & PE) - flg = TTY_PARITY; - else if (status & FE) - flg = TTY_FRAME; - else - flg = TTY_NORMAL; - - if (uart_handle_sysrq_char(&uart->port, ch)) - goto ignore_char; - - uart_insert_char(&uart->port, status, OE, ch, flg); - - ignore_char: - tty_flip_buffer_push(tty); -} - -static void bfin_serial_tx_chars(struct bfin_serial_port *uart) -{ - struct circ_buf *xmit = &uart->port.state->xmit; - - if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { -#ifdef CONFIG_BF54x - /* Clear TFI bit */ - UART_PUT_LSR(uart, TFI); -#endif - /* Anomaly notes: - * 05000215 - we always clear ETBEI within last UART TX - * interrupt to end a string. It is always set - * when start a new tx. - */ - UART_CLEAR_IER(uart, ETBEI); - return; - } - - if (uart->port.x_char) { - UART_PUT_CHAR(uart, uart->port.x_char); - uart->port.icount.tx++; - uart->port.x_char = 0; - } - - while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { - UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uart->port); -} - -static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - - spin_lock(&uart->port.lock); - while (UART_GET_LSR(uart) & DR) - bfin_serial_rx_chars(uart); - spin_unlock(&uart->port.lock); - - return IRQ_HANDLED; -} - -static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { - uart->scts = 0; - uart_handle_cts_change(&uart->port, uart->scts); - } -#endif - spin_lock(&uart->port.lock); - if (UART_GET_LSR(uart) & THRE) - bfin_serial_tx_chars(uart); - spin_unlock(&uart->port.lock); - - return IRQ_HANDLED; -} -#endif - -#ifdef CONFIG_SERIAL_BFIN_DMA -static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) -{ - struct circ_buf *xmit = &uart->port.state->xmit; - - uart->tx_done = 0; - - if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { - uart->tx_count = 0; - uart->tx_done = 1; - return; - } - - if (uart->port.x_char) { - UART_PUT_CHAR(uart, uart->port.x_char); - uart->port.icount.tx++; - uart->port.x_char = 0; - } - - uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); - if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) - uart->tx_count = UART_XMIT_SIZE - xmit->tail; - blackfin_dcache_flush_range((unsigned long)(xmit->buf+xmit->tail), - (unsigned long)(xmit->buf+xmit->tail+uart->tx_count)); - set_dma_config(uart->tx_dma_channel, - set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP, - INTR_ON_BUF, - DIMENSION_LINEAR, - DATA_SIZE_8, - DMA_SYNC_RESTART)); - set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail)); - set_dma_x_count(uart->tx_dma_channel, uart->tx_count); - set_dma_x_modify(uart->tx_dma_channel, 1); - SSYNC(); - enable_dma(uart->tx_dma_channel); - - UART_SET_IER(uart, ETBEI); -} - -static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) -{ - struct tty_struct *tty = uart->port.state->port.tty; - int i, flg, status; - - status = UART_GET_LSR(uart); - UART_CLEAR_LSR(uart); - - uart->port.icount.rx += - CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, - UART_XMIT_SIZE); - - if (status & BI) { - uart->port.icount.brk++; - if (uart_handle_break(&uart->port)) - goto dma_ignore_char; - status &= ~(PE | FE); - } - if (status & PE) - uart->port.icount.parity++; - if (status & OE) - uart->port.icount.overrun++; - if (status & FE) - uart->port.icount.frame++; - - status &= uart->port.read_status_mask; - - if (status & BI) - flg = TTY_BREAK; - else if (status & PE) - flg = TTY_PARITY; - else if (status & FE) - flg = TTY_FRAME; - else - flg = TTY_NORMAL; - - for (i = uart->rx_dma_buf.tail; ; i++) { - if (i >= UART_XMIT_SIZE) - i = 0; - if (i == uart->rx_dma_buf.head) - break; - if (!uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) - uart_insert_char(&uart->port, status, OE, - uart->rx_dma_buf.buf[i], flg); - } - - dma_ignore_char: - tty_flip_buffer_push(tty); -} - -void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) -{ - int x_pos, pos; - - dma_disable_irq(uart->tx_dma_channel); - dma_disable_irq(uart->rx_dma_channel); - spin_lock_bh(&uart->port.lock); - - /* 2D DMA RX buffer ring is used. Because curr_y_count and - * curr_x_count can't be read as an atomic operation, - * curr_y_count should be read before curr_x_count. When - * curr_x_count is read, curr_y_count may already indicate - * next buffer line. But, the position calculated here is - * still indicate the old line. The wrong position data may - * be smaller than current buffer tail, which cause garbages - * are received if it is not prohibit. - */ - uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); - x_pos = get_dma_curr_xcount(uart->rx_dma_channel); - uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; - if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) - uart->rx_dma_nrows = 0; - x_pos = DMA_RX_XCOUNT - x_pos; - if (x_pos == DMA_RX_XCOUNT) - x_pos = 0; - - pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos; - /* Ignore receiving data if new position is in the same line of - * current buffer tail and small. - */ - if (pos > uart->rx_dma_buf.tail || - uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { - uart->rx_dma_buf.head = pos; - bfin_serial_dma_rx_chars(uart); - uart->rx_dma_buf.tail = uart->rx_dma_buf.head; - } - - spin_unlock_bh(&uart->port.lock); - dma_enable_irq(uart->tx_dma_channel); - dma_enable_irq(uart->rx_dma_channel); - - mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); -} - -static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - struct circ_buf *xmit = &uart->port.state->xmit; - -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) { - uart->scts = 0; - uart_handle_cts_change(&uart->port, uart->scts); - } -#endif - - spin_lock(&uart->port.lock); - if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { - disable_dma(uart->tx_dma_channel); - clear_dma_irqstat(uart->tx_dma_channel); - /* Anomaly notes: - * 05000215 - we always clear ETBEI within last UART TX - * interrupt to end a string. It is always set - * when start a new tx. - */ - UART_CLEAR_IER(uart, ETBEI); - xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx += uart->tx_count; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uart->port); - - bfin_serial_dma_tx_chars(uart); - } - - spin_unlock(&uart->port.lock); - return IRQ_HANDLED; -} - -static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - unsigned short irqstat; - int x_pos, pos; - - spin_lock(&uart->port.lock); - irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); - clear_dma_irqstat(uart->rx_dma_channel); - - uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); - x_pos = get_dma_curr_xcount(uart->rx_dma_channel); - uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; - if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) - uart->rx_dma_nrows = 0; - - pos = uart->rx_dma_nrows * DMA_RX_XCOUNT; - if (pos > uart->rx_dma_buf.tail || - uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { - uart->rx_dma_buf.head = pos; - bfin_serial_dma_rx_chars(uart); - uart->rx_dma_buf.tail = uart->rx_dma_buf.head; - } - - spin_unlock(&uart->port.lock); - - return IRQ_HANDLED; -} -#endif - -/* - * Return TIOCSER_TEMT when transmitter is not busy. - */ -static unsigned int bfin_serial_tx_empty(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned short lsr; - - lsr = UART_GET_LSR(uart); - if (lsr & TEMT) - return TIOCSER_TEMT; - else - return 0; -} - -static void bfin_serial_break_ctl(struct uart_port *port, int break_state) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - u16 lcr = UART_GET_LCR(uart); - if (break_state) - lcr |= SB; - else - lcr &= ~SB; - UART_PUT_LCR(uart, lcr); - SSYNC(); -} - -static int bfin_serial_startup(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - -#ifdef CONFIG_SERIAL_BFIN_DMA - dma_addr_t dma_handle; - - if (request_dma(uart->rx_dma_channel, "BFIN_UART_RX") < 0) { - printk(KERN_NOTICE "Unable to attach Blackfin UART RX DMA channel\n"); - return -EBUSY; - } - - if (request_dma(uart->tx_dma_channel, "BFIN_UART_TX") < 0) { - printk(KERN_NOTICE "Unable to attach Blackfin UART TX DMA channel\n"); - free_dma(uart->rx_dma_channel); - return -EBUSY; - } - - set_dma_callback(uart->rx_dma_channel, bfin_serial_dma_rx_int, uart); - set_dma_callback(uart->tx_dma_channel, bfin_serial_dma_tx_int, uart); - - uart->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA); - uart->rx_dma_buf.head = 0; - uart->rx_dma_buf.tail = 0; - uart->rx_dma_nrows = 0; - - set_dma_config(uart->rx_dma_channel, - set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO, - INTR_ON_ROW, DIMENSION_2D, - DATA_SIZE_8, - DMA_SYNC_RESTART)); - set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT); - set_dma_x_modify(uart->rx_dma_channel, 1); - set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT); - set_dma_y_modify(uart->rx_dma_channel, 1); - set_dma_start_addr(uart->rx_dma_channel, (unsigned long)uart->rx_dma_buf.buf); - enable_dma(uart->rx_dma_channel); - - uart->rx_dma_timer.data = (unsigned long)(uart); - uart->rx_dma_timer.function = (void *)bfin_serial_rx_dma_timeout; - uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; - add_timer(&(uart->rx_dma_timer)); -#else -# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - if (kgdboc_port_line == uart->port.line && kgdboc_break_enabled) - kgdboc_break_enabled = 0; - else { -# endif - if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, - "BFIN_UART_RX", uart)) { - printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n"); - return -EBUSY; - } - - if (request_irq - (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED, - "BFIN_UART_TX", uart)) { - printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n"); - free_irq(uart->port.irq, uart); - return -EBUSY; - } - -# ifdef CONFIG_BF54x - { - /* - * UART2 and UART3 on BF548 share interrupt PINs and DMA - * controllers with SPORT2 and SPORT3. UART rx and tx - * interrupts are generated in PIO mode only when configure - * their peripheral mapping registers properly, which means - * request corresponding DMA channels in PIO mode as well. - */ - unsigned uart_dma_ch_rx, uart_dma_ch_tx; - - switch (uart->port.irq) { - case IRQ_UART3_RX: - uart_dma_ch_rx = CH_UART3_RX; - uart_dma_ch_tx = CH_UART3_TX; - break; - case IRQ_UART2_RX: - uart_dma_ch_rx = CH_UART2_RX; - uart_dma_ch_tx = CH_UART2_TX; - break; - default: - uart_dma_ch_rx = uart_dma_ch_tx = 0; - break; - }; - - if (uart_dma_ch_rx && - request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) { - printk(KERN_NOTICE"Fail to attach UART interrupt\n"); - free_irq(uart->port.irq, uart); - free_irq(uart->port.irq + 1, uart); - return -EBUSY; - } - if (uart_dma_ch_tx && - request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) { - printk(KERN_NOTICE "Fail to attach UART interrupt\n"); - free_dma(uart_dma_ch_rx); - free_irq(uart->port.irq, uart); - free_irq(uart->port.irq + 1, uart); - return -EBUSY; - } - } -# endif -# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - } -# endif -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - if (request_irq(gpio_to_irq(uart->cts_pin), - bfin_serial_mctrl_cts_int, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | - IRQF_DISABLED, "BFIN_UART_CTS", uart)) { - uart->cts_pin = -1; - pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n"); - } - } - if (uart->rts_pin >= 0) { - gpio_direction_output(uart->rts_pin, 0); - } -#endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->cts_pin >= 0 && request_irq(uart->status_irq, - bfin_serial_mctrl_cts_int, - IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) { - uart->cts_pin = -1; - pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n"); - } - - /* CTS RTS PINs are negative assertive. */ - UART_PUT_MCR(uart, ACTS); - UART_SET_IER(uart, EDSSI); -#endif - - UART_SET_IER(uart, ERBFI); - return 0; -} - -static void bfin_serial_shutdown(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - -#ifdef CONFIG_SERIAL_BFIN_DMA - disable_dma(uart->tx_dma_channel); - free_dma(uart->tx_dma_channel); - disable_dma(uart->rx_dma_channel); - free_dma(uart->rx_dma_channel); - del_timer(&(uart->rx_dma_timer)); - dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0); -#else -#ifdef CONFIG_BF54x - switch (uart->port.irq) { - case IRQ_UART3_RX: - free_dma(CH_UART3_RX); - free_dma(CH_UART3_TX); - break; - case IRQ_UART2_RX: - free_dma(CH_UART2_RX); - free_dma(CH_UART2_TX); - break; - default: - break; - }; -#endif - free_irq(uart->port.irq, uart); - free_irq(uart->port.irq+1, uart); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) - free_irq(gpio_to_irq(uart->cts_pin), uart); -#endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->cts_pin >= 0) - free_irq(uart->status_irq, uart); -#endif -} - -static void -bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned long flags; - unsigned int baud, quot; - unsigned short val, ier, lcr = 0; - - switch (termios->c_cflag & CSIZE) { - case CS8: - lcr = WLS(8); - break; - case CS7: - lcr = WLS(7); - break; - case CS6: - lcr = WLS(6); - break; - case CS5: - lcr = WLS(5); - break; - default: - printk(KERN_ERR "%s: word lengh not supported\n", - __func__); - } - - /* Anomaly notes: - * 05000231 - STOP bit is always set to 1 whatever the user is set. - */ - if (termios->c_cflag & CSTOPB) { - if (ANOMALY_05000231) - printk(KERN_WARNING "STOP bits other than 1 is not " - "supported in case of anomaly 05000231.\n"); - else - lcr |= STB; - } - if (termios->c_cflag & PARENB) - lcr |= PEN; - if (!(termios->c_cflag & PARODD)) - lcr |= EPS; - if (termios->c_cflag & CMSPAR) - lcr |= STP; - - spin_lock_irqsave(&uart->port.lock, flags); - - port->read_status_mask = OE; - if (termios->c_iflag & INPCK) - port->read_status_mask |= (FE | PE); - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= BI; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= FE | PE; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= OE; - } - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - /* If discipline is not IRDA, apply ANOMALY_05000230 */ - if (termios->c_line != N_IRDA) - quot -= ANOMALY_05000230; - - UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15); - - /* Disable UART */ - ier = UART_GET_IER(uart); - UART_DISABLE_INTS(uart); - - /* Set DLAB in LCR to Access DLL and DLH */ - UART_SET_DLAB(uart); - - UART_PUT_DLL(uart, quot & 0xFF); - UART_PUT_DLH(uart, (quot >> 8) & 0xFF); - SSYNC(); - - /* Clear DLAB in LCR to Access THR RBR IER */ - UART_CLEAR_DLAB(uart); - - UART_PUT_LCR(uart, lcr); - - /* Enable UART */ - UART_ENABLE_INTS(uart, ier); - - val = UART_GET_GCTL(uart); - val |= UCEN; - UART_PUT_GCTL(uart, val); - - /* Port speed changed, update the per-port timeout. */ - uart_update_timeout(port, termios->c_cflag, baud); - - spin_unlock_irqrestore(&uart->port.lock, flags); -} - -static const char *bfin_serial_type(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - return uart->port.type == PORT_BFIN ? "BFIN-UART" : NULL; -} - -/* - * Release the memory region(s) being used by 'port'. - */ -static void bfin_serial_release_port(struct uart_port *port) -{ -} - -/* - * Request the memory region(s) being used by 'port'. - */ -static int bfin_serial_request_port(struct uart_port *port) -{ - return 0; -} - -/* - * Configure/autoconfigure the port. - */ -static void bfin_serial_config_port(struct uart_port *port, int flags) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - if (flags & UART_CONFIG_TYPE && - bfin_serial_request_port(&uart->port) == 0) - uart->port.type = PORT_BFIN; -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - * The only change we allow are to the flags and type, and - * even then only between PORT_BFIN and PORT_UNKNOWN - */ -static int -bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return 0; -} - -/* - * Enable the IrDA function if tty->ldisc.num is N_IRDA. - * In other cases, disable IrDA function. - */ -static void bfin_serial_set_ldisc(struct uart_port *port, int ld) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned short val; - - switch (ld) { - case N_IRDA: - val = UART_GET_GCTL(uart); - val |= (IREN | RPOLC); - UART_PUT_GCTL(uart, val); - break; - default: - val = UART_GET_GCTL(uart); - val &= ~(IREN | RPOLC); - UART_PUT_GCTL(uart, val); - } -} - -static void bfin_serial_reset_irda(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned short val; - - val = UART_GET_GCTL(uart); - val &= ~(IREN | RPOLC); - UART_PUT_GCTL(uart, val); - SSYNC(); - val |= (IREN | RPOLC); - UART_PUT_GCTL(uart, val); - SSYNC(); -} - -#ifdef CONFIG_CONSOLE_POLL -/* Anomaly notes: - * 05000099 - Because we only use THRE in poll_put and DR in poll_get, - * losing other bits of UART_LSR is not a problem here. - */ -static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - while (!(UART_GET_LSR(uart) & THRE)) - cpu_relax(); - - UART_CLEAR_DLAB(uart); - UART_PUT_CHAR(uart, (unsigned char)chr); -} - -static int bfin_serial_poll_get_char(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned char chr; - - while (!(UART_GET_LSR(uart) & DR)) - cpu_relax(); - - UART_CLEAR_DLAB(uart); - chr = UART_GET_CHAR(uart); - - return chr; -} -#endif - -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) -static void bfin_kgdboc_port_shutdown(struct uart_port *port) -{ - if (kgdboc_break_enabled) { - kgdboc_break_enabled = 0; - bfin_serial_shutdown(port); - } -} - -static int bfin_kgdboc_port_startup(struct uart_port *port) -{ - kgdboc_port_line = port->line; - kgdboc_break_enabled = !bfin_serial_startup(port); - return 0; -} -#endif - -static struct uart_ops bfin_serial_pops = { - .tx_empty = bfin_serial_tx_empty, - .set_mctrl = bfin_serial_set_mctrl, - .get_mctrl = bfin_serial_get_mctrl, - .stop_tx = bfin_serial_stop_tx, - .start_tx = bfin_serial_start_tx, - .stop_rx = bfin_serial_stop_rx, - .enable_ms = bfin_serial_enable_ms, - .break_ctl = bfin_serial_break_ctl, - .startup = bfin_serial_startup, - .shutdown = bfin_serial_shutdown, - .set_termios = bfin_serial_set_termios, - .set_ldisc = bfin_serial_set_ldisc, - .type = bfin_serial_type, - .release_port = bfin_serial_release_port, - .request_port = bfin_serial_request_port, - .config_port = bfin_serial_config_port, - .verify_port = bfin_serial_verify_port, -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - .kgdboc_port_startup = bfin_kgdboc_port_startup, - .kgdboc_port_shutdown = bfin_kgdboc_port_shutdown, -#endif -#ifdef CONFIG_CONSOLE_POLL - .poll_put_char = bfin_serial_poll_put_char, - .poll_get_char = bfin_serial_poll_get_char, -#endif -}; - -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) -/* - * If the port was already initialised (eg, by a boot loader), - * try to determine the current setup. - */ -static void __init -bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, - int *parity, int *bits) -{ - unsigned short status; - - status = UART_GET_IER(uart) & (ERBFI | ETBEI); - if (status == (ERBFI | ETBEI)) { - /* ok, the port was enabled */ - u16 lcr, dlh, dll; - - lcr = UART_GET_LCR(uart); - - *parity = 'n'; - if (lcr & PEN) { - if (lcr & EPS) - *parity = 'e'; - else - *parity = 'o'; - } - switch (lcr & 0x03) { - case 0: *bits = 5; break; - case 1: *bits = 6; break; - case 2: *bits = 7; break; - case 3: *bits = 8; break; - } - /* Set DLAB in LCR to Access DLL and DLH */ - UART_SET_DLAB(uart); - - dll = UART_GET_DLL(uart); - dlh = UART_GET_DLH(uart); - - /* Clear DLAB in LCR to Access THR RBR IER */ - UART_CLEAR_DLAB(uart); - - *baud = get_sclk() / (16*(dll | dlh << 8)); - } - pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits); -} - -static struct uart_driver bfin_serial_reg; - -static void bfin_serial_console_putchar(struct uart_port *port, int ch) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - while (!(UART_GET_LSR(uart) & THRE)) - barrier(); - UART_PUT_CHAR(uart, ch); -} - -#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) || - defined (CONFIG_EARLY_PRINTK) */ - -#ifdef CONFIG_SERIAL_BFIN_CONSOLE -#define CLASS_BFIN_CONSOLE "bfin-console" -/* - * Interrupts are disabled on entering - */ -static void -bfin_serial_console_write(struct console *co, const char *s, unsigned int count) -{ - struct bfin_serial_port *uart = bfin_serial_ports[co->index]; - unsigned long flags; - - spin_lock_irqsave(&uart->port.lock, flags); - uart_console_write(&uart->port, s, count, bfin_serial_console_putchar); - spin_unlock_irqrestore(&uart->port.lock, flags); - -} - -static int __init -bfin_serial_console_setup(struct console *co, char *options) -{ - struct bfin_serial_port *uart; - int baud = 57600; - int bits = 8; - int parity = 'n'; -# if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ - defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) - int flow = 'r'; -# else - int flow = 'n'; -# endif - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index < 0 || co->index >= BFIN_UART_NR_PORTS) - return -ENODEV; - - uart = bfin_serial_ports[co->index]; - if (!uart) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - bfin_serial_console_get_options(uart, &baud, &parity, &bits); - - return uart_set_options(&uart->port, co, baud, parity, bits, flow); -} - -static struct console bfin_serial_console = { - .name = BFIN_SERIAL_DEV_NAME, - .write = bfin_serial_console_write, - .device = uart_console_device, - .setup = bfin_serial_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &bfin_serial_reg, -}; -#define BFIN_SERIAL_CONSOLE &bfin_serial_console -#else -#define BFIN_SERIAL_CONSOLE NULL -#endif /* CONFIG_SERIAL_BFIN_CONSOLE */ - -#ifdef CONFIG_EARLY_PRINTK -static struct bfin_serial_port bfin_earlyprintk_port; -#define CLASS_BFIN_EARLYPRINTK "bfin-earlyprintk" - -/* - * Interrupts are disabled on entering - */ -static void -bfin_earlyprintk_console_write(struct console *co, const char *s, unsigned int count) -{ - unsigned long flags; - - if (bfin_earlyprintk_port.port.line != co->index) - return; - - spin_lock_irqsave(&bfin_earlyprintk_port.port.lock, flags); - uart_console_write(&bfin_earlyprintk_port.port, s, count, - bfin_serial_console_putchar); - spin_unlock_irqrestore(&bfin_earlyprintk_port.port.lock, flags); -} - -/* - * This should have a .setup or .early_setup in it, but then things get called - * without the command line options, and the baud rate gets messed up - so - * don't let the common infrastructure play with things. (see calls to setup - * & earlysetup in ./kernel/printk.c:register_console() - */ -static struct __initdata console bfin_early_serial_console = { - .name = "early_BFuart", - .write = bfin_earlyprintk_console_write, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &bfin_serial_reg, -}; -#endif - -static struct uart_driver bfin_serial_reg = { - .owner = THIS_MODULE, - .driver_name = DRIVER_NAME, - .dev_name = BFIN_SERIAL_DEV_NAME, - .major = BFIN_SERIAL_MAJOR, - .minor = BFIN_SERIAL_MINOR, - .nr = BFIN_UART_NR_PORTS, - .cons = BFIN_SERIAL_CONSOLE, -}; - -static int bfin_serial_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct bfin_serial_port *uart = platform_get_drvdata(pdev); - - return uart_suspend_port(&bfin_serial_reg, &uart->port); -} - -static int bfin_serial_resume(struct platform_device *pdev) -{ - struct bfin_serial_port *uart = platform_get_drvdata(pdev); - - return uart_resume_port(&bfin_serial_reg, &uart->port); -} - -static int bfin_serial_probe(struct platform_device *pdev) -{ - struct resource *res; - struct bfin_serial_port *uart = NULL; - int ret = 0; - - if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) { - dev_err(&pdev->dev, "Wrong bfin uart platform device id.\n"); - return -ENOENT; - } - - if (bfin_serial_ports[pdev->id] == NULL) { - - uart = kzalloc(sizeof(*uart), GFP_KERNEL); - if (!uart) { - dev_err(&pdev->dev, - "fail to malloc bfin_serial_port\n"); - return -ENOMEM; - } - bfin_serial_ports[pdev->id] = uart; - -#ifdef CONFIG_EARLY_PRINTK - if (!(bfin_earlyprintk_port.port.membase - && bfin_earlyprintk_port.port.line == pdev->id)) { - /* - * If the peripheral PINs of current port is allocated - * in earlyprintk probe stage, don't do it again. - */ -#endif - ret = peripheral_request_list( - (unsigned short *)pdev->dev.platform_data, DRIVER_NAME); - if (ret) { - dev_err(&pdev->dev, - "fail to request bfin serial peripherals\n"); - goto out_error_free_mem; - } -#ifdef CONFIG_EARLY_PRINTK - } -#endif - - spin_lock_init(&uart->port.lock); - uart->port.uartclk = get_sclk(); - uart->port.fifosize = BFIN_UART_TX_FIFO_SIZE; - uart->port.ops = &bfin_serial_pops; - uart->port.line = pdev->id; - uart->port.iotype = UPIO_MEM; - uart->port.flags = UPF_BOOT_AUTOCONF; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); - ret = -ENOENT; - goto out_error_free_peripherals; - } - - uart->port.membase = ioremap(res->start, - res->end - res->start); - if (!uart->port.membase) { - dev_err(&pdev->dev, "Cannot map uart IO\n"); - ret = -ENXIO; - goto out_error_free_peripherals; - } - uart->port.mapbase = res->start; - - uart->port.irq = platform_get_irq(pdev, 0); - if (uart->port.irq < 0) { - dev_err(&pdev->dev, "No uart RX/TX IRQ specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - - uart->status_irq = platform_get_irq(pdev, 1); - if (uart->status_irq < 0) { - dev_err(&pdev->dev, "No uart status IRQ specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - -#ifdef CONFIG_SERIAL_BFIN_DMA - uart->tx_done = 1; - uart->tx_count = 0; - - res = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (res == NULL) { - dev_err(&pdev->dev, "No uart TX DMA channel specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - uart->tx_dma_channel = res->start; - - res = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (res == NULL) { - dev_err(&pdev->dev, "No uart RX DMA channel specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - uart->rx_dma_channel = res->start; - - init_timer(&(uart->rx_dma_timer)); -#endif - -#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ - defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (res == NULL) - uart->cts_pin = -1; - else - uart->cts_pin = res->start; - - res = platform_get_resource(pdev, IORESOURCE_IO, 1); - if (res == NULL) - uart->rts_pin = -1; - else - uart->rts_pin = res->start; -# if defined(CONFIG_SERIAL_BFIN_CTSRTS) - if (uart->rts_pin >= 0) - gpio_request(uart->rts_pin, DRIVER_NAME); -# endif -#endif - } - -#ifdef CONFIG_SERIAL_BFIN_CONSOLE - if (!is_early_platform_device(pdev)) { -#endif - uart = bfin_serial_ports[pdev->id]; - uart->port.dev = &pdev->dev; - dev_set_drvdata(&pdev->dev, uart); - ret = uart_add_one_port(&bfin_serial_reg, &uart->port); -#ifdef CONFIG_SERIAL_BFIN_CONSOLE - } -#endif - - if (!ret) - return 0; - - if (uart) { -out_error_unmap: - iounmap(uart->port.membase); -out_error_free_peripherals: - peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); -out_error_free_mem: - kfree(uart); - bfin_serial_ports[pdev->id] = NULL; - } - - return ret; -} - -static int __devexit bfin_serial_remove(struct platform_device *pdev) -{ - struct bfin_serial_port *uart = platform_get_drvdata(pdev); - - dev_set_drvdata(&pdev->dev, NULL); - - if (uart) { - uart_remove_one_port(&bfin_serial_reg, &uart->port); -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->rts_pin >= 0) - gpio_free(uart->rts_pin); -#endif - iounmap(uart->port.membase); - peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); - kfree(uart); - bfin_serial_ports[pdev->id] = NULL; - } - - return 0; -} - -static struct platform_driver bfin_serial_driver = { - .probe = bfin_serial_probe, - .remove = __devexit_p(bfin_serial_remove), - .suspend = bfin_serial_suspend, - .resume = bfin_serial_resume, - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) -static __initdata struct early_platform_driver early_bfin_serial_driver = { - .class_str = CLASS_BFIN_CONSOLE, - .pdrv = &bfin_serial_driver, - .requested_id = EARLY_PLATFORM_ID_UNSET, -}; - -static int __init bfin_serial_rs_console_init(void) -{ - early_platform_driver_register(&early_bfin_serial_driver, DRIVER_NAME); - - early_platform_driver_probe(CLASS_BFIN_CONSOLE, BFIN_UART_NR_PORTS, 0); - - register_console(&bfin_serial_console); - - return 0; -} -console_initcall(bfin_serial_rs_console_init); -#endif - -#ifdef CONFIG_EARLY_PRINTK -/* - * Memory can't be allocated dynamically during earlyprink init stage. - * So, do individual probe for earlyprink with a static uart port variable. - */ -static int bfin_earlyprintk_probe(struct platform_device *pdev) -{ - struct resource *res; - int ret; - - if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) { - dev_err(&pdev->dev, "Wrong earlyprintk platform device id.\n"); - return -ENOENT; - } - - ret = peripheral_request_list( - (unsigned short *)pdev->dev.platform_data, DRIVER_NAME); - if (ret) { - dev_err(&pdev->dev, - "fail to request bfin serial peripherals\n"); - return ret; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); - ret = -ENOENT; - goto out_error_free_peripherals; - } - - bfin_earlyprintk_port.port.membase = ioremap(res->start, - res->end - res->start); - if (!bfin_earlyprintk_port.port.membase) { - dev_err(&pdev->dev, "Cannot map uart IO\n"); - ret = -ENXIO; - goto out_error_free_peripherals; - } - bfin_earlyprintk_port.port.mapbase = res->start; - bfin_earlyprintk_port.port.line = pdev->id; - bfin_earlyprintk_port.port.uartclk = get_sclk(); - bfin_earlyprintk_port.port.fifosize = BFIN_UART_TX_FIFO_SIZE; - spin_lock_init(&bfin_earlyprintk_port.port.lock); - - return 0; - -out_error_free_peripherals: - peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); - - return ret; -} - -static struct platform_driver bfin_earlyprintk_driver = { - .probe = bfin_earlyprintk_probe, - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -static __initdata struct early_platform_driver early_bfin_earlyprintk_driver = { - .class_str = CLASS_BFIN_EARLYPRINTK, - .pdrv = &bfin_earlyprintk_driver, - .requested_id = EARLY_PLATFORM_ID_UNSET, -}; - -struct console __init *bfin_earlyserial_init(unsigned int port, - unsigned int cflag) -{ - struct ktermios t; - char port_name[20]; - - if (port < 0 || port >= BFIN_UART_NR_PORTS) - return NULL; - - /* - * Only probe resource of the given port in earlyprintk boot arg. - * The expected port id should be indicated in port name string. - */ - snprintf(port_name, 20, DRIVER_NAME ".%d", port); - early_platform_driver_register(&early_bfin_earlyprintk_driver, - port_name); - early_platform_driver_probe(CLASS_BFIN_EARLYPRINTK, 1, 0); - - if (!bfin_earlyprintk_port.port.membase) - return NULL; - -#ifdef CONFIG_SERIAL_BFIN_CONSOLE - /* - * If we are using early serial, don't let the normal console rewind - * log buffer, since that causes things to be printed multiple times - */ - bfin_serial_console.flags &= ~CON_PRINTBUFFER; -#endif - - bfin_early_serial_console.index = port; - t.c_cflag = cflag; - t.c_iflag = 0; - t.c_oflag = 0; - t.c_lflag = ICANON; - t.c_line = port; - bfin_serial_set_termios(&bfin_earlyprintk_port.port, &t, &t); - - return &bfin_early_serial_console; -} -#endif /* CONFIG_EARLY_PRINTK */ - -static int __init bfin_serial_init(void) -{ - int ret; - - pr_info("Blackfin serial driver\n"); - - ret = uart_register_driver(&bfin_serial_reg); - if (ret) { - pr_err("failed to register %s:%d\n", - bfin_serial_reg.driver_name, ret); - } - - ret = platform_driver_register(&bfin_serial_driver); - if (ret) { - pr_err("fail to register bfin uart\n"); - uart_unregister_driver(&bfin_serial_reg); - } - - return ret; -} - -static void __exit bfin_serial_exit(void) -{ - platform_driver_unregister(&bfin_serial_driver); - uart_unregister_driver(&bfin_serial_reg); -} - - -module_init(bfin_serial_init); -module_exit(bfin_serial_exit); - -MODULE_AUTHOR("Sonic Zhang, Aubrey Li"); -MODULE_DESCRIPTION("Blackfin generic serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR); -MODULE_ALIAS("platform:bfin-uart"); diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c deleted file mode 100644 index e95c524d9d18..000000000000 --- a/drivers/serial/bfin_sport_uart.c +++ /dev/null @@ -1,935 +0,0 @@ -/* - * Blackfin On-Chip Sport Emulated UART Driver - * - * Copyright 2006-2009 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - */ - -/* - * This driver and the hardware supported are in term of EE-191 of ADI. - * http://www.analog.com/static/imported-files/application_notes/EE191.pdf - * This application note describe how to implement a UART on a Sharc DSP, - * but this driver is implemented on Blackfin Processor. - * Transmit Frame Sync is not used by this driver to transfer data out. - */ - -/* #define DEBUG */ - -#define DRV_NAME "bfin-sport-uart" -#define DEVICE_NAME "ttySS" -#define pr_fmt(fmt) DRV_NAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "bfin_sport_uart.h" - -struct sport_uart_port { - struct uart_port port; - int err_irq; - unsigned short csize; - unsigned short rxmask; - unsigned short txmask1; - unsigned short txmask2; - unsigned char stopb; -/* unsigned char parib; */ -#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS - int cts_pin; - int rts_pin; -#endif -}; - -static int sport_uart_tx_chars(struct sport_uart_port *up); -static void sport_stop_tx(struct uart_port *port); - -static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value) -{ - pr_debug("%s value:%x, mask1=0x%x, mask2=0x%x\n", __func__, value, - up->txmask1, up->txmask2); - - /* Place Start and Stop bits */ - __asm__ __volatile__ ( - "%[val] <<= 1;" - "%[val] = %[val] & %[mask1];" - "%[val] = %[val] | %[mask2];" - : [val]"+d"(value) - : [mask1]"d"(up->txmask1), [mask2]"d"(up->txmask2) - : "ASTAT" - ); - pr_debug("%s value:%x\n", __func__, value); - - SPORT_PUT_TX(up, value); -} - -static inline unsigned char rx_one_byte(struct sport_uart_port *up) -{ - unsigned int value; - unsigned char extract; - u32 tmp_mask1, tmp_mask2, tmp_shift, tmp; - - if ((up->csize + up->stopb) > 7) - value = SPORT_GET_RX32(up); - else - value = SPORT_GET_RX(up); - - pr_debug("%s value:%x, cs=%d, mask=0x%x\n", __func__, value, - up->csize, up->rxmask); - - /* Extract data */ - __asm__ __volatile__ ( - "%[extr] = 0;" - "%[mask1] = %[rxmask];" - "%[mask2] = 0x0200(Z);" - "%[shift] = 0;" - "LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];" - ".Lloop_s:" - "%[tmp] = extract(%[val], %[mask1].L)(Z);" - "%[tmp] <<= %[shift];" - "%[extr] = %[extr] | %[tmp];" - "%[mask1] = %[mask1] - %[mask2];" - ".Lloop_e:" - "%[shift] += 1;" - : [extr]"=&d"(extract), [shift]"=&d"(tmp_shift), [tmp]"=&d"(tmp), - [mask1]"=&d"(tmp_mask1), [mask2]"=&d"(tmp_mask2) - : [val]"d"(value), [rxmask]"d"(up->rxmask), [lc]"a"(up->csize) - : "ASTAT", "LB0", "LC0", "LT0" - ); - - pr_debug(" extract:%x\n", extract); - return extract; -} - -static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate) -{ - int tclkdiv, rclkdiv; - unsigned int sclk = get_sclk(); - - /* Set TCR1 and TCR2, TFSR is not enabled for uart */ - SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK)); - SPORT_PUT_TCR2(up, size + 1); - pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up)); - - /* Set RCR1 and RCR2 */ - SPORT_PUT_RCR1(up, (RCKFE | LARFS | LRFS | RFSR | IRCLK)); - SPORT_PUT_RCR2(up, (size + 1) * 2 - 1); - pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up)); - - tclkdiv = sclk / (2 * baud_rate) - 1; - /* The actual uart baud rate of devices vary between +/-2%. The sport - * RX sample rate should be faster than the double of the worst case, - * otherwise, wrong data are received. So, set sport RX clock to be - * 3% faster. - */ - rclkdiv = sclk / (2 * baud_rate * 2 * 97 / 100) - 1; - SPORT_PUT_TCLKDIV(up, tclkdiv); - SPORT_PUT_RCLKDIV(up, rclkdiv); - SSYNC(); - pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, rclkdiv:%d\n", - __func__, sclk, baud_rate, tclkdiv, rclkdiv); - - return 0; -} - -static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id) -{ - struct sport_uart_port *up = dev_id; - struct tty_struct *tty = up->port.state->port.tty; - unsigned int ch; - - spin_lock(&up->port.lock); - - while (SPORT_GET_STAT(up) & RXNE) { - ch = rx_one_byte(up); - up->port.icount.rx++; - - if (!uart_handle_sysrq_char(&up->port, ch)) - tty_insert_flip_char(tty, ch, TTY_NORMAL); - } - tty_flip_buffer_push(tty); - - spin_unlock(&up->port.lock); - - return IRQ_HANDLED; -} - -static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id) -{ - struct sport_uart_port *up = dev_id; - - spin_lock(&up->port.lock); - sport_uart_tx_chars(up); - spin_unlock(&up->port.lock); - - return IRQ_HANDLED; -} - -static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) -{ - struct sport_uart_port *up = dev_id; - struct tty_struct *tty = up->port.state->port.tty; - unsigned int stat = SPORT_GET_STAT(up); - - spin_lock(&up->port.lock); - - /* Overflow in RX FIFO */ - if (stat & ROVF) { - up->port.icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - SPORT_PUT_STAT(up, ROVF); /* Clear ROVF bit */ - } - /* These should not happen */ - if (stat & (TOVF | TUVF | RUVF)) { - pr_err("SPORT Error:%s %s %s\n", - (stat & TOVF) ? "TX overflow" : "", - (stat & TUVF) ? "TX underflow" : "", - (stat & RUVF) ? "RX underflow" : ""); - SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); - SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN); - } - SSYNC(); - - spin_unlock(&up->port.lock); - return IRQ_HANDLED; -} - -#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS -static unsigned int sport_get_mctrl(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - if (up->cts_pin < 0) - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - - /* CTS PIN is negative assertive. */ - if (SPORT_UART_GET_CTS(up)) - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - else - return TIOCM_DSR | TIOCM_CAR; -} - -static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - if (up->rts_pin < 0) - return; - - /* RTS PIN is negative assertive. */ - if (mctrl & TIOCM_RTS) - SPORT_UART_ENABLE_RTS(up); - else - SPORT_UART_DISABLE_RTS(up); -} - -/* - * Handle any change of modem status signal. - */ -static irqreturn_t sport_mctrl_cts_int(int irq, void *dev_id) -{ - struct sport_uart_port *up = (struct sport_uart_port *)dev_id; - unsigned int status; - - status = sport_get_mctrl(&up->port); - uart_handle_cts_change(&up->port, status & TIOCM_CTS); - - return IRQ_HANDLED; -} -#else -static unsigned int sport_get_mctrl(struct uart_port *port) -{ - pr_debug("%s enter\n", __func__); - return TIOCM_CTS | TIOCM_CD | TIOCM_DSR; -} - -static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - pr_debug("%s enter\n", __func__); -} -#endif - -/* Reqeust IRQ, Setup clock */ -static int sport_startup(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - int ret; - - pr_debug("%s enter\n", __func__); - ret = request_irq(up->port.irq, sport_uart_rx_irq, 0, - "SPORT_UART_RX", up); - if (ret) { - dev_err(port->dev, "unable to request SPORT RX interrupt\n"); - return ret; - } - - ret = request_irq(up->port.irq+1, sport_uart_tx_irq, 0, - "SPORT_UART_TX", up); - if (ret) { - dev_err(port->dev, "unable to request SPORT TX interrupt\n"); - goto fail1; - } - - ret = request_irq(up->err_irq, sport_uart_err_irq, 0, - "SPORT_UART_STATUS", up); - if (ret) { - dev_err(port->dev, "unable to request SPORT status interrupt\n"); - goto fail2; - } - -#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS - if (up->cts_pin >= 0) { - if (request_irq(gpio_to_irq(up->cts_pin), - sport_mctrl_cts_int, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | - IRQF_DISABLED, "BFIN_SPORT_UART_CTS", up)) { - up->cts_pin = -1; - dev_info(port->dev, "Unable to attach BlackFin UART \ - over SPORT CTS interrupt. So, disable it.\n"); - } - } - if (up->rts_pin >= 0) - gpio_direction_output(up->rts_pin, 0); -#endif - - return 0; - fail2: - free_irq(up->port.irq+1, up); - fail1: - free_irq(up->port.irq, up); - - return ret; -} - -/* - * sport_uart_tx_chars - * - * ret 1 means need to enable sport. - * ret 0 means do nothing. - */ -static int sport_uart_tx_chars(struct sport_uart_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - - if (SPORT_GET_STAT(up) & TXF) - return 0; - - if (up->port.x_char) { - tx_one_byte(up, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return 1; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - /* The waiting loop to stop SPORT TX from TX interrupt is - * too long. This may block SPORT RX interrupts and cause - * RX FIFO overflow. So, do stop sport TX only after the last - * char in TX FIFO is moved into the shift register. - */ - if (SPORT_GET_STAT(up) & TXHRE) - sport_stop_tx(&up->port); - return 0; - } - - while(!(SPORT_GET_STAT(up) & TXF) && !uart_circ_empty(xmit)) { - tx_one_byte(up, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1); - up->port.icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - return 1; -} - -static unsigned int sport_tx_empty(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - unsigned int stat; - - stat = SPORT_GET_STAT(up); - pr_debug("%s stat:%04x\n", __func__, stat); - if (stat & TXHRE) { - return TIOCSER_TEMT; - } else - return 0; -} - -static void sport_stop_tx(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - pr_debug("%s enter\n", __func__); - - if (!(SPORT_GET_TCR1(up) & TSPEN)) - return; - - /* Although the hold register is empty, last byte is still in shift - * register and not sent out yet. So, put a dummy data into TX FIFO. - * Then, sport tx stops when last byte is shift out and the dummy - * data is moved into the shift register. - */ - SPORT_PUT_TX(up, 0xffff); - while (!(SPORT_GET_STAT(up) & TXHRE)) - cpu_relax(); - - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); - SSYNC(); - - return; -} - -static void sport_start_tx(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - pr_debug("%s enter\n", __func__); - - /* Write data into SPORT FIFO before enable SPROT to transmit */ - if (sport_uart_tx_chars(up)) { - /* Enable transmit, then an interrupt will generated */ - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); - SSYNC(); - } - - pr_debug("%s exit\n", __func__); -} - -static void sport_stop_rx(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - pr_debug("%s enter\n", __func__); - /* Disable sport to stop rx */ - SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN)); - SSYNC(); -} - -static void sport_enable_ms(struct uart_port *port) -{ - pr_debug("%s enter\n", __func__); -} - -static void sport_break_ctl(struct uart_port *port, int break_state) -{ - pr_debug("%s enter\n", __func__); -} - -static void sport_shutdown(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - dev_dbg(port->dev, "%s enter\n", __func__); - - /* Disable sport */ - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); - SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN)); - SSYNC(); - - free_irq(up->port.irq, up); - free_irq(up->port.irq+1, up); - free_irq(up->err_irq, up); -#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS - if (up->cts_pin >= 0) - free_irq(gpio_to_irq(up->cts_pin), up); -#endif -} - -static const char *sport_type(struct uart_port *port) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - pr_debug("%s enter\n", __func__); - return up->port.type == PORT_BFIN_SPORT ? "BFIN-SPORT-UART" : NULL; -} - -static void sport_release_port(struct uart_port *port) -{ - pr_debug("%s enter\n", __func__); -} - -static int sport_request_port(struct uart_port *port) -{ - pr_debug("%s enter\n", __func__); - return 0; -} - -static void sport_config_port(struct uart_port *port, int flags) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - pr_debug("%s enter\n", __func__); - up->port.type = PORT_BFIN_SPORT; -} - -static int sport_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - pr_debug("%s enter\n", __func__); - return 0; -} - -static void sport_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - unsigned long flags; - int i; - - pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag); - - switch (termios->c_cflag & CSIZE) { - case CS8: - up->csize = 8; - break; - case CS7: - up->csize = 7; - break; - case CS6: - up->csize = 6; - break; - case CS5: - up->csize = 5; - break; - default: - pr_warning("requested word length not supported\n"); - } - - if (termios->c_cflag & CSTOPB) { - up->stopb = 1; - } - if (termios->c_cflag & PARENB) { - pr_warning("PAREN bits is not supported yet\n"); - /* up->parib = 1; */ - } - - spin_lock_irqsave(&up->port.lock, flags); - - port->read_status_mask = 0; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - - /* RX extract mask */ - up->rxmask = 0x01 | (((up->csize + up->stopb) * 2 - 1) << 0x8); - /* TX masks, 8 bit data and 1 bit stop for example: - * mask1 = b#0111111110 - * mask2 = b#1000000000 - */ - for (i = 0, up->txmask1 = 0; i < up->csize; i++) - up->txmask1 |= (1<txmask2 = (1<stopb) { - ++i; - up->txmask2 |= (1<txmask1 <<= 1; - up->txmask2 <<= 1; - /* uart baud rate */ - port->uartclk = uart_get_baud_rate(port, termios, old, 0, get_sclk()/16); - - /* Disable UART */ - SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); - SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN); - - sport_uart_setup(up, up->csize + up->stopb, port->uartclk); - - /* driver TX line high after config, one dummy data is - * necessary to stop sport after shift one byte - */ - SPORT_PUT_TX(up, 0xffff); - SPORT_PUT_TX(up, 0xffff); - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); - SSYNC(); - while (!(SPORT_GET_STAT(up) & TXHRE)) - cpu_relax(); - SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); - SSYNC(); - - /* Port speed changed, update the per-port timeout. */ - uart_update_timeout(port, termios->c_cflag, port->uartclk); - - /* Enable sport rx */ - SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) | RSPEN); - SSYNC(); - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -struct uart_ops sport_uart_ops = { - .tx_empty = sport_tx_empty, - .set_mctrl = sport_set_mctrl, - .get_mctrl = sport_get_mctrl, - .stop_tx = sport_stop_tx, - .start_tx = sport_start_tx, - .stop_rx = sport_stop_rx, - .enable_ms = sport_enable_ms, - .break_ctl = sport_break_ctl, - .startup = sport_startup, - .shutdown = sport_shutdown, - .set_termios = sport_set_termios, - .type = sport_type, - .release_port = sport_release_port, - .request_port = sport_request_port, - .config_port = sport_config_port, - .verify_port = sport_verify_port, -}; - -#define BFIN_SPORT_UART_MAX_PORTS 4 - -static struct sport_uart_port *bfin_sport_uart_ports[BFIN_SPORT_UART_MAX_PORTS]; - -#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE -#define CLASS_BFIN_SPORT_CONSOLE "bfin-sport-console" - -static int __init -sport_uart_console_setup(struct console *co, char *options) -{ - struct sport_uart_port *up; - int baud = 57600; - int bits = 8; - int parity = 'n'; -# ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS - int flow = 'r'; -# else - int flow = 'n'; -# endif - - /* Check whether an invalid uart number has been specified */ - if (co->index < 0 || co->index >= BFIN_SPORT_UART_MAX_PORTS) - return -ENODEV; - - up = bfin_sport_uart_ports[co->index]; - if (!up) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&up->port, co, baud, parity, bits, flow); -} - -static void sport_uart_console_putchar(struct uart_port *port, int ch) -{ - struct sport_uart_port *up = (struct sport_uart_port *)port; - - while (SPORT_GET_STAT(up) & TXF) - barrier(); - - tx_one_byte(up, ch); -} - -/* - * Interrupts are disabled on entering - */ -static void -sport_uart_console_write(struct console *co, const char *s, unsigned int count) -{ - struct sport_uart_port *up = bfin_sport_uart_ports[co->index]; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - if (SPORT_GET_TCR1(up) & TSPEN) - uart_console_write(&up->port, s, count, sport_uart_console_putchar); - else { - /* dummy data to start sport */ - while (SPORT_GET_STAT(up) & TXF) - barrier(); - SPORT_PUT_TX(up, 0xffff); - /* Enable transmit, then an interrupt will generated */ - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); - SSYNC(); - - uart_console_write(&up->port, s, count, sport_uart_console_putchar); - - /* Although the hold register is empty, last byte is still in shift - * register and not sent out yet. So, put a dummy data into TX FIFO. - * Then, sport tx stops when last byte is shift out and the dummy - * data is moved into the shift register. - */ - while (SPORT_GET_STAT(up) & TXF) - barrier(); - SPORT_PUT_TX(up, 0xffff); - while (!(SPORT_GET_STAT(up) & TXHRE)) - barrier(); - - /* Stop sport tx transfer */ - SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); - SSYNC(); - } - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static struct uart_driver sport_uart_reg; - -static struct console sport_uart_console = { - .name = DEVICE_NAME, - .write = sport_uart_console_write, - .device = uart_console_device, - .setup = sport_uart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sport_uart_reg, -}; - -#define SPORT_UART_CONSOLE (&sport_uart_console) -#else -#define SPORT_UART_CONSOLE NULL -#endif /* CONFIG_SERIAL_BFIN_SPORT_CONSOLE */ - - -static struct uart_driver sport_uart_reg = { - .owner = THIS_MODULE, - .driver_name = DRV_NAME, - .dev_name = DEVICE_NAME, - .major = 204, - .minor = 84, - .nr = BFIN_SPORT_UART_MAX_PORTS, - .cons = SPORT_UART_CONSOLE, -}; - -#ifdef CONFIG_PM -static int sport_uart_suspend(struct device *dev) -{ - struct sport_uart_port *sport = dev_get_drvdata(dev); - - dev_dbg(dev, "%s enter\n", __func__); - if (sport) - uart_suspend_port(&sport_uart_reg, &sport->port); - - return 0; -} - -static int sport_uart_resume(struct device *dev) -{ - struct sport_uart_port *sport = dev_get_drvdata(dev); - - dev_dbg(dev, "%s enter\n", __func__); - if (sport) - uart_resume_port(&sport_uart_reg, &sport->port); - - return 0; -} - -static struct dev_pm_ops bfin_sport_uart_dev_pm_ops = { - .suspend = sport_uart_suspend, - .resume = sport_uart_resume, -}; -#endif - -static int __devinit sport_uart_probe(struct platform_device *pdev) -{ - struct resource *res; - struct sport_uart_port *sport; - int ret = 0; - - dev_dbg(&pdev->dev, "%s enter\n", __func__); - - if (pdev->id < 0 || pdev->id >= BFIN_SPORT_UART_MAX_PORTS) { - dev_err(&pdev->dev, "Wrong sport uart platform device id.\n"); - return -ENOENT; - } - - if (bfin_sport_uart_ports[pdev->id] == NULL) { - bfin_sport_uart_ports[pdev->id] = - kzalloc(sizeof(struct sport_uart_port), GFP_KERNEL); - sport = bfin_sport_uart_ports[pdev->id]; - if (!sport) { - dev_err(&pdev->dev, - "Fail to malloc sport_uart_port\n"); - return -ENOMEM; - } - - ret = peripheral_request_list( - (unsigned short *)pdev->dev.platform_data, DRV_NAME); - if (ret) { - dev_err(&pdev->dev, - "Fail to request SPORT peripherals\n"); - goto out_error_free_mem; - } - - spin_lock_init(&sport->port.lock); - sport->port.fifosize = SPORT_TX_FIFO_SIZE, - sport->port.ops = &sport_uart_ops; - sport->port.line = pdev->id; - sport->port.iotype = UPIO_MEM; - sport->port.flags = UPF_BOOT_AUTOCONF; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); - ret = -ENOENT; - goto out_error_free_peripherals; - } - - sport->port.membase = ioremap(res->start, resource_size(res)); - if (!sport->port.membase) { - dev_err(&pdev->dev, "Cannot map sport IO\n"); - ret = -ENXIO; - goto out_error_free_peripherals; - } - sport->port.mapbase = res->start; - - sport->port.irq = platform_get_irq(pdev, 0); - if (sport->port.irq < 0) { - dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - - sport->err_irq = platform_get_irq(pdev, 1); - if (sport->err_irq < 0) { - dev_err(&pdev->dev, "No sport status IRQ specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } -#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (res == NULL) - sport->cts_pin = -1; - else - sport->cts_pin = res->start; - - res = platform_get_resource(pdev, IORESOURCE_IO, 1); - if (res == NULL) - sport->rts_pin = -1; - else - sport->rts_pin = res->start; - - if (sport->rts_pin >= 0) - gpio_request(sport->rts_pin, DRV_NAME); -#endif - } - -#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE - if (!is_early_platform_device(pdev)) { -#endif - sport = bfin_sport_uart_ports[pdev->id]; - sport->port.dev = &pdev->dev; - dev_set_drvdata(&pdev->dev, sport); - ret = uart_add_one_port(&sport_uart_reg, &sport->port); -#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE - } -#endif - if (!ret) - return 0; - - if (sport) { -out_error_unmap: - iounmap(sport->port.membase); -out_error_free_peripherals: - peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); -out_error_free_mem: - kfree(sport); - bfin_sport_uart_ports[pdev->id] = NULL; - } - - return ret; -} - -static int __devexit sport_uart_remove(struct platform_device *pdev) -{ - struct sport_uart_port *sport = platform_get_drvdata(pdev); - - dev_dbg(&pdev->dev, "%s enter\n", __func__); - dev_set_drvdata(&pdev->dev, NULL); - - if (sport) { - uart_remove_one_port(&sport_uart_reg, &sport->port); -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (sport->rts_pin >= 0) - gpio_free(sport->rts_pin); -#endif - iounmap(sport->port.membase); - peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); - kfree(sport); - bfin_sport_uart_ports[pdev->id] = NULL; - } - - return 0; -} - -static struct platform_driver sport_uart_driver = { - .probe = sport_uart_probe, - .remove = __devexit_p(sport_uart_remove), - .driver = { - .name = DRV_NAME, -#ifdef CONFIG_PM - .pm = &bfin_sport_uart_dev_pm_ops, -#endif - }, -}; - -#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE -static __initdata struct early_platform_driver early_sport_uart_driver = { - .class_str = CLASS_BFIN_SPORT_CONSOLE, - .pdrv = &sport_uart_driver, - .requested_id = EARLY_PLATFORM_ID_UNSET, -}; - -static int __init sport_uart_rs_console_init(void) -{ - early_platform_driver_register(&early_sport_uart_driver, DRV_NAME); - - early_platform_driver_probe(CLASS_BFIN_SPORT_CONSOLE, - BFIN_SPORT_UART_MAX_PORTS, 0); - - register_console(&sport_uart_console); - - return 0; -} -console_initcall(sport_uart_rs_console_init); -#endif - -static int __init sport_uart_init(void) -{ - int ret; - - pr_info("Blackfin uart over sport driver\n"); - - ret = uart_register_driver(&sport_uart_reg); - if (ret) { - pr_err("failed to register %s:%d\n", - sport_uart_reg.driver_name, ret); - return ret; - } - - ret = platform_driver_register(&sport_uart_driver); - if (ret) { - pr_err("failed to register sport uart driver:%d\n", ret); - uart_unregister_driver(&sport_uart_reg); - } - - return ret; -} -module_init(sport_uart_init); - -static void __exit sport_uart_exit(void) -{ - platform_driver_unregister(&sport_uart_driver); - uart_unregister_driver(&sport_uart_reg); -} -module_exit(sport_uart_exit); - -MODULE_AUTHOR("Sonic Zhang, Roy Huang"); -MODULE_DESCRIPTION("Blackfin serial over SPORT driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h deleted file mode 100644 index 6d06ce1d5675..000000000000 --- a/drivers/serial/bfin_sport_uart.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Blackfin On-Chip Sport Emulated UART Driver - * - * Copyright 2006-2008 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - */ - -/* - * This driver and the hardware supported are in term of EE-191 of ADI. - * http://www.analog.com/static/imported-files/application_notes/EE191.pdf - * This application note describe how to implement a UART on a Sharc DSP, - * but this driver is implemented on Blackfin Processor. - * Transmit Frame Sync is not used by this driver to transfer data out. - */ - -#ifndef _BFIN_SPORT_UART_H -#define _BFIN_SPORT_UART_H - -#define OFFSET_TCR1 0x00 /* Transmit Configuration 1 Register */ -#define OFFSET_TCR2 0x04 /* Transmit Configuration 2 Register */ -#define OFFSET_TCLKDIV 0x08 /* Transmit Serial Clock Divider Register */ -#define OFFSET_TFSDIV 0x0C /* Transmit Frame Sync Divider Register */ -#define OFFSET_TX 0x10 /* Transmit Data Register */ -#define OFFSET_RX 0x18 /* Receive Data Register */ -#define OFFSET_RCR1 0x20 /* Receive Configuration 1 Register */ -#define OFFSET_RCR2 0x24 /* Receive Configuration 2 Register */ -#define OFFSET_RCLKDIV 0x28 /* Receive Serial Clock Divider Register */ -#define OFFSET_RFSDIV 0x2c /* Receive Frame Sync Divider Register */ -#define OFFSET_STAT 0x30 /* Status Register */ - -#define SPORT_GET_TCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR1)) -#define SPORT_GET_TCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR2)) -#define SPORT_GET_TCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TCLKDIV)) -#define SPORT_GET_TFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TFSDIV)) -#define SPORT_GET_TX(sport) bfin_read16(((sport)->port.membase + OFFSET_TX)) -#define SPORT_GET_RX(sport) bfin_read16(((sport)->port.membase + OFFSET_RX)) -/* - * If another interrupt fires while doing a 32-bit read from RX FIFO, - * a fake RX underflow error will be generated. So disable interrupts - * to prevent interruption while reading the FIFO. - */ -#define SPORT_GET_RX32(sport) \ -({ \ - unsigned int __ret; \ - if (ANOMALY_05000473) \ - local_irq_disable(); \ - __ret = bfin_read32((sport)->port.membase + OFFSET_RX); \ - if (ANOMALY_05000473) \ - local_irq_enable(); \ - __ret; \ -}) -#define SPORT_GET_RCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR1)) -#define SPORT_GET_RCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR2)) -#define SPORT_GET_RCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RCLKDIV)) -#define SPORT_GET_RFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RFSDIV)) -#define SPORT_GET_STAT(sport) bfin_read16(((sport)->port.membase + OFFSET_STAT)) - -#define SPORT_PUT_TCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR1), v) -#define SPORT_PUT_TCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR2), v) -#define SPORT_PUT_TCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCLKDIV), v) -#define SPORT_PUT_TFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TFSDIV), v) -#define SPORT_PUT_TX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TX), v) -#define SPORT_PUT_RX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RX), v) -#define SPORT_PUT_RCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR1), v) -#define SPORT_PUT_RCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR2), v) -#define SPORT_PUT_RCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCLKDIV), v) -#define SPORT_PUT_RFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RFSDIV), v) -#define SPORT_PUT_STAT(sport, v) bfin_write16(((sport)->port.membase + OFFSET_STAT), v) - -#define SPORT_TX_FIFO_SIZE 8 - -#define SPORT_UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define SPORT_UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) -#define SPORT_UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) - -#if defined(CONFIG_SERIAL_BFIN_SPORT0_UART_CTSRTS) \ - || defined(CONFIG_SERIAL_BFIN_SPORT1_UART_CTSRTS) \ - || defined(CONFIG_SERIAL_BFIN_SPORT2_UART_CTSRTS) \ - || defined(CONFIG_SERIAL_BFIN_SPORT3_UART_CTSRTS) -# define CONFIG_SERIAL_BFIN_SPORT_CTSRTS -#endif - -#endif /* _BFIN_SPORT_UART_H */ diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c deleted file mode 100644 index b6acd19b458e..000000000000 --- a/drivers/serial/clps711x.c +++ /dev/null @@ -1,579 +0,0 @@ -/* - * linux/drivers/char/clps711x.c - * - * Driver for CLPS711x serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright 1999 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define UART_NR 2 - -#define SERIAL_CLPS711X_MAJOR 204 -#define SERIAL_CLPS711X_MINOR 40 -#define SERIAL_CLPS711X_NR UART_NR - -/* - * We use the relevant SYSCON register as a base address for these ports. - */ -#define UBRLCR(port) ((port)->iobase + UBRLCR1 - SYSCON1) -#define UARTDR(port) ((port)->iobase + UARTDR1 - SYSCON1) -#define SYSFLG(port) ((port)->iobase + SYSFLG1 - SYSCON1) -#define SYSCON(port) ((port)->iobase + SYSCON1 - SYSCON1) - -#define TX_IRQ(port) ((port)->irq) -#define RX_IRQ(port) ((port)->irq + 1) - -#define UART_ANY_ERR (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR) - -#define tx_enabled(port) ((port)->unused[0]) - -static void clps711xuart_stop_tx(struct uart_port *port) -{ - if (tx_enabled(port)) { - disable_irq(TX_IRQ(port)); - tx_enabled(port) = 0; - } -} - -static void clps711xuart_start_tx(struct uart_port *port) -{ - if (!tx_enabled(port)) { - enable_irq(TX_IRQ(port)); - tx_enabled(port) = 1; - } -} - -static void clps711xuart_stop_rx(struct uart_port *port) -{ - disable_irq(RX_IRQ(port)); -} - -static void clps711xuart_enable_ms(struct uart_port *port) -{ -} - -static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct tty_struct *tty = port->state->port.tty; - unsigned int status, ch, flg; - - status = clps_readl(SYSFLG(port)); - while (!(status & SYSFLG_URXFE)) { - ch = clps_readl(UARTDR(port)); - - port->icount.rx++; - - flg = TTY_NORMAL; - - /* - * Note that the error handling code is - * out of the main execution path - */ - if (unlikely(ch & UART_ANY_ERR)) { - if (ch & UARTDR_PARERR) - port->icount.parity++; - else if (ch & UARTDR_FRMERR) - port->icount.frame++; - if (ch & UARTDR_OVERR) - port->icount.overrun++; - - ch &= port->read_status_mask; - - if (ch & UARTDR_PARERR) - flg = TTY_PARITY; - else if (ch & UARTDR_FRMERR) - flg = TTY_FRAME; - -#ifdef SUPPORT_SYSRQ - port->sysrq = 0; -#endif - } - - if (uart_handle_sysrq_char(port, ch)) - goto ignore_char; - - /* - * CHECK: does overrun affect the current character? - * ASSUMPTION: it does not. - */ - uart_insert_char(port, ch, UARTDR_OVERR, ch, flg); - - ignore_char: - status = clps_readl(SYSFLG(port)); - } - tty_flip_buffer_push(tty); - return IRQ_HANDLED; -} - -static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct circ_buf *xmit = &port->state->xmit; - int count; - - if (port->x_char) { - clps_writel(port->x_char, UARTDR(port)); - port->icount.tx++; - port->x_char = 0; - return IRQ_HANDLED; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - clps711xuart_stop_tx(port); - return IRQ_HANDLED; - } - - count = port->fifosize >> 1; - do { - clps_writel(xmit->buf[xmit->tail], UARTDR(port)); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - clps711xuart_stop_tx(port); - - return IRQ_HANDLED; -} - -static unsigned int clps711xuart_tx_empty(struct uart_port *port) -{ - unsigned int status = clps_readl(SYSFLG(port)); - return status & SYSFLG_UBUSY ? 0 : TIOCSER_TEMT; -} - -static unsigned int clps711xuart_get_mctrl(struct uart_port *port) -{ - unsigned int port_addr; - unsigned int result = 0; - unsigned int status; - - port_addr = SYSFLG(port); - if (port_addr == SYSFLG1) { - status = clps_readl(SYSFLG1); - if (status & SYSFLG1_DCD) - result |= TIOCM_CAR; - if (status & SYSFLG1_DSR) - result |= TIOCM_DSR; - if (status & SYSFLG1_CTS) - result |= TIOCM_CTS; - } - - return result; -} - -static void -clps711xuart_set_mctrl_null(struct uart_port *port, unsigned int mctrl) -{ -} - -static void clps711xuart_break_ctl(struct uart_port *port, int break_state) -{ - unsigned long flags; - unsigned int ubrlcr; - - spin_lock_irqsave(&port->lock, flags); - ubrlcr = clps_readl(UBRLCR(port)); - if (break_state == -1) - ubrlcr |= UBRLCR_BREAK; - else - ubrlcr &= ~UBRLCR_BREAK; - clps_writel(ubrlcr, UBRLCR(port)); - spin_unlock_irqrestore(&port->lock, flags); -} - -static int clps711xuart_startup(struct uart_port *port) -{ - unsigned int syscon; - int retval; - - tx_enabled(port) = 1; - - /* - * Allocate the IRQs - */ - retval = request_irq(TX_IRQ(port), clps711xuart_int_tx, 0, - "clps711xuart_tx", port); - if (retval) - return retval; - - retval = request_irq(RX_IRQ(port), clps711xuart_int_rx, 0, - "clps711xuart_rx", port); - if (retval) { - free_irq(TX_IRQ(port), port); - return retval; - } - - /* - * enable the port - */ - syscon = clps_readl(SYSCON(port)); - syscon |= SYSCON_UARTEN; - clps_writel(syscon, SYSCON(port)); - - return 0; -} - -static void clps711xuart_shutdown(struct uart_port *port) -{ - unsigned int ubrlcr, syscon; - - /* - * Free the interrupt - */ - free_irq(TX_IRQ(port), port); /* TX interrupt */ - free_irq(RX_IRQ(port), port); /* RX interrupt */ - - /* - * disable the port - */ - syscon = clps_readl(SYSCON(port)); - syscon &= ~SYSCON_UARTEN; - clps_writel(syscon, SYSCON(port)); - - /* - * disable break condition and fifos - */ - ubrlcr = clps_readl(UBRLCR(port)); - ubrlcr &= ~(UBRLCR_FIFOEN | UBRLCR_BREAK); - clps_writel(ubrlcr, UBRLCR(port)); -} - -static void -clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned int ubrlcr, baud, quot; - unsigned long flags; - - /* - * We don't implement CREAD. - */ - termios->c_cflag |= CREAD; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - switch (termios->c_cflag & CSIZE) { - case CS5: - ubrlcr = UBRLCR_WRDLEN5; - break; - case CS6: - ubrlcr = UBRLCR_WRDLEN6; - break; - case CS7: - ubrlcr = UBRLCR_WRDLEN7; - break; - default: // CS8 - ubrlcr = UBRLCR_WRDLEN8; - break; - } - if (termios->c_cflag & CSTOPB) - ubrlcr |= UBRLCR_XSTOP; - if (termios->c_cflag & PARENB) { - ubrlcr |= UBRLCR_PRTEN; - if (!(termios->c_cflag & PARODD)) - ubrlcr |= UBRLCR_EVENPRT; - } - if (port->fifosize > 1) - ubrlcr |= UBRLCR_FIFOEN; - - spin_lock_irqsave(&port->lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - port->read_status_mask = UARTDR_OVERR; - if (termios->c_iflag & INPCK) - port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UARTDR_FRMERR | UARTDR_PARERR; - if (termios->c_iflag & IGNBRK) { - /* - * If we're ignoring parity and break indicators, - * ignore overruns to (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UARTDR_OVERR; - } - - quot -= 1; - - clps_writel(ubrlcr | quot, UBRLCR(port)); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *clps711xuart_type(struct uart_port *port) -{ - return port->type == PORT_CLPS711X ? "CLPS711x" : NULL; -} - -/* - * Configure/autoconfigure the port. - */ -static void clps711xuart_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) - port->type = PORT_CLPS711X; -} - -static void clps711xuart_release_port(struct uart_port *port) -{ -} - -static int clps711xuart_request_port(struct uart_port *port) -{ - return 0; -} - -static struct uart_ops clps711x_pops = { - .tx_empty = clps711xuart_tx_empty, - .set_mctrl = clps711xuart_set_mctrl_null, - .get_mctrl = clps711xuart_get_mctrl, - .stop_tx = clps711xuart_stop_tx, - .start_tx = clps711xuart_start_tx, - .stop_rx = clps711xuart_stop_rx, - .enable_ms = clps711xuart_enable_ms, - .break_ctl = clps711xuart_break_ctl, - .startup = clps711xuart_startup, - .shutdown = clps711xuart_shutdown, - .set_termios = clps711xuart_set_termios, - .type = clps711xuart_type, - .config_port = clps711xuart_config_port, - .release_port = clps711xuart_release_port, - .request_port = clps711xuart_request_port, -}; - -static struct uart_port clps711x_ports[UART_NR] = { - { - .iobase = SYSCON1, - .irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */ - .uartclk = 3686400, - .fifosize = 16, - .ops = &clps711x_pops, - .line = 0, - .flags = UPF_BOOT_AUTOCONF, - }, - { - .iobase = SYSCON2, - .irq = IRQ_UTXINT2, /* IRQ_URXINT2 */ - .uartclk = 3686400, - .fifosize = 16, - .ops = &clps711x_pops, - .line = 1, - .flags = UPF_BOOT_AUTOCONF, - } -}; - -#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE -static void clps711xuart_console_putchar(struct uart_port *port, int ch) -{ - while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF) - barrier(); - clps_writel(ch, UARTDR(port)); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - * - * Note that this is called with interrupts already disabled - */ -static void -clps711xuart_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_port *port = clps711x_ports + co->index; - unsigned int status, syscon; - - /* - * Ensure that the port is enabled. - */ - syscon = clps_readl(SYSCON(port)); - clps_writel(syscon | SYSCON_UARTEN, SYSCON(port)); - - uart_console_write(port, s, count, clps711xuart_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the uart state. - */ - do { - status = clps_readl(SYSFLG(port)); - } while (status & SYSFLG_UBUSY); - - clps_writel(syscon, SYSCON(port)); -} - -static void __init -clps711xuart_console_get_options(struct uart_port *port, int *baud, - int *parity, int *bits) -{ - if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) { - unsigned int ubrlcr, quot; - - ubrlcr = clps_readl(UBRLCR(port)); - - *parity = 'n'; - if (ubrlcr & UBRLCR_PRTEN) { - if (ubrlcr & UBRLCR_EVENPRT) - *parity = 'e'; - else - *parity = 'o'; - } - - if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7) - *bits = 7; - else - *bits = 8; - - quot = ubrlcr & UBRLCR_BAUD_MASK; - *baud = port->uartclk / (16 * (quot + 1)); - } -} - -static int __init clps711xuart_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - port = uart_get_console(clps711x_ports, UART_NR, co); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - clps711xuart_console_get_options(port, &baud, &parity, &bits); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver clps711x_reg; -static struct console clps711x_console = { - .name = "ttyCL", - .write = clps711xuart_console_write, - .device = uart_console_device, - .setup = clps711xuart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &clps711x_reg, -}; - -static int __init clps711xuart_console_init(void) -{ - register_console(&clps711x_console); - return 0; -} -console_initcall(clps711xuart_console_init); - -#define CLPS711X_CONSOLE &clps711x_console -#else -#define CLPS711X_CONSOLE NULL -#endif - -static struct uart_driver clps711x_reg = { - .driver_name = "ttyCL", - .dev_name = "ttyCL", - .major = SERIAL_CLPS711X_MAJOR, - .minor = SERIAL_CLPS711X_MINOR, - .nr = UART_NR, - - .cons = CLPS711X_CONSOLE, -}; - -static int __init clps711xuart_init(void) -{ - int ret, i; - - printk(KERN_INFO "Serial: CLPS711x driver\n"); - - ret = uart_register_driver(&clps711x_reg); - if (ret) - return ret; - - for (i = 0; i < UART_NR; i++) - uart_add_one_port(&clps711x_reg, &clps711x_ports[i]); - - return 0; -} - -static void __exit clps711xuart_exit(void) -{ - int i; - - for (i = 0; i < UART_NR; i++) - uart_remove_one_port(&clps711x_reg, &clps711x_ports[i]); - - uart_unregister_driver(&clps711x_reg); -} - -module_init(clps711xuart_init); -module_exit(clps711xuart_exit); - -MODULE_AUTHOR("Deep Blue Solutions Ltd"); -MODULE_DESCRIPTION("CLPS-711x generic serial driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV(SERIAL_CLPS711X_MAJOR, SERIAL_CLPS711X_MINOR); diff --git a/drivers/serial/cpm_uart/Makefile b/drivers/serial/cpm_uart/Makefile deleted file mode 100644 index e072724ea754..000000000000 --- a/drivers/serial/cpm_uart/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# Makefile for the Motorola 8xx FEC ethernet controller -# - -obj-$(CONFIG_SERIAL_CPM) += cpm_uart.o - -# Select the correct platform objects. -cpm_uart-objs-$(CONFIG_CPM2) += cpm_uart_cpm2.o -cpm_uart-objs-$(CONFIG_8xx) += cpm_uart_cpm1.o - -cpm_uart-objs := cpm_uart_core.o $(cpm_uart-objs-y) diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h deleted file mode 100644 index b754dcf0fda5..000000000000 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * linux/drivers/serial/cpm_uart.h - * - * Driver for CPM (SCC/SMC) serial ports - * - * Copyright (C) 2004 Freescale Semiconductor, Inc. - * - * 2006 (c) MontaVista Software, Inc. - * Vitaly Bordug - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - * - */ -#ifndef CPM_UART_H -#define CPM_UART_H - -#include -#include - -#if defined(CONFIG_CPM2) -#include "cpm_uart_cpm2.h" -#elif defined(CONFIG_8xx) -#include "cpm_uart_cpm1.h" -#endif - -#define SERIAL_CPM_MAJOR 204 -#define SERIAL_CPM_MINOR 46 - -#define IS_SMC(pinfo) (pinfo->flags & FLAG_SMC) -#define IS_DISCARDING(pinfo) (pinfo->flags & FLAG_DISCARDING) -#define FLAG_DISCARDING 0x00000004 /* when set, don't discard */ -#define FLAG_SMC 0x00000002 -#define FLAG_CONSOLE 0x00000001 - -#define UART_SMC1 fsid_smc1_uart -#define UART_SMC2 fsid_smc2_uart -#define UART_SCC1 fsid_scc1_uart -#define UART_SCC2 fsid_scc2_uart -#define UART_SCC3 fsid_scc3_uart -#define UART_SCC4 fsid_scc4_uart - -#define UART_NR fs_uart_nr - -#define RX_NUM_FIFO 4 -#define RX_BUF_SIZE 32 -#define TX_NUM_FIFO 4 -#define TX_BUF_SIZE 32 - -#define SCC_WAIT_CLOSING 100 - -#define GPIO_CTS 0 -#define GPIO_RTS 1 -#define GPIO_DCD 2 -#define GPIO_DSR 3 -#define GPIO_DTR 4 -#define GPIO_RI 5 - -#define NUM_GPIOS (GPIO_RI+1) - -struct uart_cpm_port { - struct uart_port port; - u16 rx_nrfifos; - u16 rx_fifosize; - u16 tx_nrfifos; - u16 tx_fifosize; - smc_t __iomem *smcp; - smc_uart_t __iomem *smcup; - scc_t __iomem *sccp; - scc_uart_t __iomem *sccup; - cbd_t __iomem *rx_bd_base; - cbd_t __iomem *rx_cur; - cbd_t __iomem *tx_bd_base; - cbd_t __iomem *tx_cur; - unsigned char *tx_buf; - unsigned char *rx_buf; - u32 flags; - struct clk *clk; - u8 brg; - uint dp_addr; - void *mem_addr; - dma_addr_t dma_addr; - u32 mem_size; - /* wait on close if needed */ - int wait_closing; - /* value to combine with opcode to form cpm command */ - u32 command; - int gpios[NUM_GPIOS]; -}; - -extern int cpm_uart_nr; -extern struct uart_cpm_port cpm_uart_ports[UART_NR]; - -/* these are located in their respective files */ -void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd); -void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, - struct device_node *np); -void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram); -int cpm_uart_init_portdesc(void); -int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con); -void cpm_uart_freebuf(struct uart_cpm_port *pinfo); - -void smc1_lineif(struct uart_cpm_port *pinfo); -void smc2_lineif(struct uart_cpm_port *pinfo); -void scc1_lineif(struct uart_cpm_port *pinfo); -void scc2_lineif(struct uart_cpm_port *pinfo); -void scc3_lineif(struct uart_cpm_port *pinfo); -void scc4_lineif(struct uart_cpm_port *pinfo); - -/* - virtual to phys transtalion -*/ -static inline unsigned long cpu2cpm_addr(void *addr, - struct uart_cpm_port *pinfo) -{ - int offset; - u32 val = (u32)addr; - u32 mem = (u32)pinfo->mem_addr; - /* sane check */ - if (likely(val >= mem && val < mem + pinfo->mem_size)) { - offset = val - mem; - return pinfo->dma_addr + offset; - } - /* something nasty happened */ - BUG(); - return 0; -} - -static inline void *cpm2cpu_addr(unsigned long addr, - struct uart_cpm_port *pinfo) -{ - int offset; - u32 val = addr; - u32 dma = (u32)pinfo->dma_addr; - /* sane check */ - if (likely(val >= dma && val < dma + pinfo->mem_size)) { - offset = val - dma; - return pinfo->mem_addr + offset; - } - /* something nasty happened */ - BUG(); - return NULL; -} - - -#endif /* CPM_UART_H */ diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c deleted file mode 100644 index 8692ff98fc07..000000000000 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ /dev/null @@ -1,1443 +0,0 @@ -/* - * linux/drivers/serial/cpm_uart.c - * - * Driver for CPM (SCC/SMC) serial ports; core driver - * - * Based on arch/ppc/cpm2_io/uart.c by Dan Malek - * Based on ppc8xx.c by Thomas Gleixner - * Based on drivers/serial/amba.c by Russell King - * - * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) - * Pantelis Antoniou (panto@intracom.gr) (CPM1) - * - * Copyright (C) 2004, 2007 Freescale Semiconductor, Inc. - * (C) 2004 Intracom, S.A. - * (C) 2005-2006 MontaVista Software, Inc. - * Vitaly Bordug - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include - -#include "cpm_uart.h" - - -/**************************************************************/ - -static int cpm_uart_tx_pump(struct uart_port *port); -static void cpm_uart_init_smc(struct uart_cpm_port *pinfo); -static void cpm_uart_init_scc(struct uart_cpm_port *pinfo); -static void cpm_uart_initbd(struct uart_cpm_port *pinfo); - -/**************************************************************/ - -#define HW_BUF_SPD_THRESHOLD 9600 - -/* - * Check, if transmit buffers are processed -*/ -static unsigned int cpm_uart_tx_empty(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - cbd_t __iomem *bdp = pinfo->tx_bd_base; - int ret = 0; - - while (1) { - if (in_be16(&bdp->cbd_sc) & BD_SC_READY) - break; - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) { - ret = TIOCSER_TEMT; - break; - } - bdp++; - } - - pr_debug("CPM uart[%d]:tx_empty: %d\n", port->line, ret); - - return ret; -} - -static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - - if (pinfo->gpios[GPIO_RTS] >= 0) - gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS)); - - if (pinfo->gpios[GPIO_DTR] >= 0) - gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR)); -} - -static unsigned int cpm_uart_get_mctrl(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - - if (pinfo->gpios[GPIO_CTS] >= 0) { - if (gpio_get_value(pinfo->gpios[GPIO_CTS])) - mctrl &= ~TIOCM_CTS; - } - - if (pinfo->gpios[GPIO_DSR] >= 0) { - if (gpio_get_value(pinfo->gpios[GPIO_DSR])) - mctrl &= ~TIOCM_DSR; - } - - if (pinfo->gpios[GPIO_DCD] >= 0) { - if (gpio_get_value(pinfo->gpios[GPIO_DCD])) - mctrl &= ~TIOCM_CAR; - } - - if (pinfo->gpios[GPIO_RI] >= 0) { - if (!gpio_get_value(pinfo->gpios[GPIO_RI])) - mctrl |= TIOCM_RNG; - } - - return mctrl; -} - -/* - * Stop transmitter - */ -static void cpm_uart_stop_tx(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - smc_t __iomem *smcp = pinfo->smcp; - scc_t __iomem *sccp = pinfo->sccp; - - pr_debug("CPM uart[%d]:stop tx\n", port->line); - - if (IS_SMC(pinfo)) - clrbits8(&smcp->smc_smcm, SMCM_TX); - else - clrbits16(&sccp->scc_sccm, UART_SCCM_TX); -} - -/* - * Start transmitter - */ -static void cpm_uart_start_tx(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - smc_t __iomem *smcp = pinfo->smcp; - scc_t __iomem *sccp = pinfo->sccp; - - pr_debug("CPM uart[%d]:start tx\n", port->line); - - if (IS_SMC(pinfo)) { - if (in_8(&smcp->smc_smcm) & SMCM_TX) - return; - } else { - if (in_be16(&sccp->scc_sccm) & UART_SCCM_TX) - return; - } - - if (cpm_uart_tx_pump(port) != 0) { - if (IS_SMC(pinfo)) { - setbits8(&smcp->smc_smcm, SMCM_TX); - } else { - setbits16(&sccp->scc_sccm, UART_SCCM_TX); - } - } -} - -/* - * Stop receiver - */ -static void cpm_uart_stop_rx(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - smc_t __iomem *smcp = pinfo->smcp; - scc_t __iomem *sccp = pinfo->sccp; - - pr_debug("CPM uart[%d]:stop rx\n", port->line); - - if (IS_SMC(pinfo)) - clrbits8(&smcp->smc_smcm, SMCM_RX); - else - clrbits16(&sccp->scc_sccm, UART_SCCM_RX); -} - -/* - * Enable Modem status interrupts - */ -static void cpm_uart_enable_ms(struct uart_port *port) -{ - pr_debug("CPM uart[%d]:enable ms\n", port->line); -} - -/* - * Generate a break. - */ -static void cpm_uart_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - - pr_debug("CPM uart[%d]:break ctrl, break_state: %d\n", port->line, - break_state); - - if (break_state) - cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); - else - cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); -} - -/* - * Transmit characters, refill buffer descriptor, if possible - */ -static void cpm_uart_int_tx(struct uart_port *port) -{ - pr_debug("CPM uart[%d]:TX INT\n", port->line); - - cpm_uart_tx_pump(port); -} - -#ifdef CONFIG_CONSOLE_POLL -static int serial_polled; -#endif - -/* - * Receive characters - */ -static void cpm_uart_int_rx(struct uart_port *port) -{ - int i; - unsigned char ch; - u8 *cp; - struct tty_struct *tty = port->state->port.tty; - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - cbd_t __iomem *bdp; - u16 status; - unsigned int flg; - - pr_debug("CPM uart[%d]:RX INT\n", port->line); - - /* Just loop through the closed BDs and copy the characters into - * the buffer. - */ - bdp = pinfo->rx_cur; - for (;;) { -#ifdef CONFIG_CONSOLE_POLL - if (unlikely(serial_polled)) { - serial_polled = 0; - return; - } -#endif - /* get status */ - status = in_be16(&bdp->cbd_sc); - /* If this one is empty, return happy */ - if (status & BD_SC_EMPTY) - break; - - /* get number of characters, and check spce in flip-buffer */ - i = in_be16(&bdp->cbd_datlen); - - /* If we have not enough room in tty flip buffer, then we try - * later, which will be the next rx-interrupt or a timeout - */ - if(tty_buffer_request_room(tty, i) < i) { - printk(KERN_WARNING "No room in flip buffer\n"); - return; - } - - /* get pointer */ - cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); - - /* loop through the buffer */ - while (i-- > 0) { - ch = *cp++; - port->icount.rx++; - flg = TTY_NORMAL; - - if (status & - (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV)) - goto handle_error; - if (uart_handle_sysrq_char(port, ch)) - continue; -#ifdef CONFIG_CONSOLE_POLL - if (unlikely(serial_polled)) { - serial_polled = 0; - return; - } -#endif - error_return: - tty_insert_flip_char(tty, ch, flg); - - } /* End while (i--) */ - - /* This BD is ready to be used again. Clear status. get next */ - clrbits16(&bdp->cbd_sc, BD_SC_BR | BD_SC_FR | BD_SC_PR | - BD_SC_OV | BD_SC_ID); - setbits16(&bdp->cbd_sc, BD_SC_EMPTY); - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = pinfo->rx_bd_base; - else - bdp++; - - } /* End for (;;) */ - - /* Write back buffer pointer */ - pinfo->rx_cur = bdp; - - /* activate BH processing */ - tty_flip_buffer_push(tty); - - return; - - /* Error processing */ - - handle_error: - /* Statistics */ - if (status & BD_SC_BR) - port->icount.brk++; - if (status & BD_SC_PR) - port->icount.parity++; - if (status & BD_SC_FR) - port->icount.frame++; - if (status & BD_SC_OV) - port->icount.overrun++; - - /* Mask out ignored conditions */ - status &= port->read_status_mask; - - /* Handle the remaining ones */ - if (status & BD_SC_BR) - flg = TTY_BREAK; - else if (status & BD_SC_PR) - flg = TTY_PARITY; - else if (status & BD_SC_FR) - flg = TTY_FRAME; - - /* overrun does not affect the current character ! */ - if (status & BD_SC_OV) { - ch = 0; - flg = TTY_OVERRUN; - /* We skip this buffer */ - /* CHECK: Is really nothing senseful there */ - /* ASSUMPTION: it contains nothing valid */ - i = 0; - } -#ifdef SUPPORT_SYSRQ - port->sysrq = 0; -#endif - goto error_return; -} - -/* - * Asynchron mode interrupt handler - */ -static irqreturn_t cpm_uart_int(int irq, void *data) -{ - u8 events; - struct uart_port *port = data; - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - smc_t __iomem *smcp = pinfo->smcp; - scc_t __iomem *sccp = pinfo->sccp; - - pr_debug("CPM uart[%d]:IRQ\n", port->line); - - if (IS_SMC(pinfo)) { - events = in_8(&smcp->smc_smce); - out_8(&smcp->smc_smce, events); - if (events & SMCM_BRKE) - uart_handle_break(port); - if (events & SMCM_RX) - cpm_uart_int_rx(port); - if (events & SMCM_TX) - cpm_uart_int_tx(port); - } else { - events = in_be16(&sccp->scc_scce); - out_be16(&sccp->scc_scce, events); - if (events & UART_SCCM_BRKE) - uart_handle_break(port); - if (events & UART_SCCM_RX) - cpm_uart_int_rx(port); - if (events & UART_SCCM_TX) - cpm_uart_int_tx(port); - } - return (events) ? IRQ_HANDLED : IRQ_NONE; -} - -static int cpm_uart_startup(struct uart_port *port) -{ - int retval; - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - - pr_debug("CPM uart[%d]:startup\n", port->line); - - /* If the port is not the console, make sure rx is disabled. */ - if (!(pinfo->flags & FLAG_CONSOLE)) { - /* Disable UART rx */ - if (IS_SMC(pinfo)) { - clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN); - clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX); - } else { - clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR); - clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); - } - cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); - } - /* Install interrupt handler. */ - retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port); - if (retval) - return retval; - - /* Startup rx-int */ - if (IS_SMC(pinfo)) { - setbits8(&pinfo->smcp->smc_smcm, SMCM_RX); - setbits16(&pinfo->smcp->smc_smcmr, (SMCMR_REN | SMCMR_TEN)); - } else { - setbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); - setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT)); - } - - return 0; -} - -inline void cpm_uart_wait_until_send(struct uart_cpm_port *pinfo) -{ - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(pinfo->wait_closing); -} - -/* - * Shutdown the uart - */ -static void cpm_uart_shutdown(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - - pr_debug("CPM uart[%d]:shutdown\n", port->line); - - /* free interrupt handler */ - free_irq(port->irq, port); - - /* If the port is not the console, disable Rx and Tx. */ - if (!(pinfo->flags & FLAG_CONSOLE)) { - /* Wait for all the BDs marked sent */ - while(!cpm_uart_tx_empty(port)) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(2); - } - - if (pinfo->wait_closing) - cpm_uart_wait_until_send(pinfo); - - /* Stop uarts */ - if (IS_SMC(pinfo)) { - smc_t __iomem *smcp = pinfo->smcp; - clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); - clrbits8(&smcp->smc_smcm, SMCM_RX | SMCM_TX); - } else { - scc_t __iomem *sccp = pinfo->sccp; - clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); - clrbits16(&sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); - } - - /* Shut them really down and reinit buffer descriptors */ - if (IS_SMC(pinfo)) { - out_be16(&pinfo->smcup->smc_brkcr, 0); - cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); - } else { - out_be16(&pinfo->sccup->scc_brkcr, 0); - cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); - } - - cpm_uart_initbd(pinfo); - } -} - -static void cpm_uart_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - int baud; - unsigned long flags; - u16 cval, scval, prev_mode; - int bits, sbits; - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - smc_t __iomem *smcp = pinfo->smcp; - scc_t __iomem *sccp = pinfo->sccp; - - pr_debug("CPM uart[%d]:set_termios\n", port->line); - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); - if (baud <= HW_BUF_SPD_THRESHOLD || - (pinfo->port.state && pinfo->port.state->port.tty->low_latency)) - pinfo->rx_fifosize = 1; - else - pinfo->rx_fifosize = RX_BUF_SIZE; - - /* Character length programmed into the mode register is the - * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, - * 1 or 2 stop bits, minus 1. - * The value 'bits' counts this for us. - */ - cval = 0; - scval = 0; - - /* byte size */ - switch (termios->c_cflag & CSIZE) { - case CS5: - bits = 5; - break; - case CS6: - bits = 6; - break; - case CS7: - bits = 7; - break; - case CS8: - bits = 8; - break; - /* Never happens, but GCC is too dumb to figure it out */ - default: - bits = 8; - break; - } - sbits = bits - 5; - - if (termios->c_cflag & CSTOPB) { - cval |= SMCMR_SL; /* Two stops */ - scval |= SCU_PSMR_SL; - bits++; - } - - if (termios->c_cflag & PARENB) { - cval |= SMCMR_PEN; - scval |= SCU_PSMR_PEN; - bits++; - if (!(termios->c_cflag & PARODD)) { - cval |= SMCMR_PM_EVEN; - scval |= (SCU_PSMR_REVP | SCU_PSMR_TEVP); - } - } - - /* - * Update the timeout - */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * Set up parity check flag - */ -#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) - - port->read_status_mask = (BD_SC_EMPTY | BD_SC_OV); - if (termios->c_iflag & INPCK) - port->read_status_mask |= BD_SC_FR | BD_SC_PR; - if ((termios->c_iflag & BRKINT) || (termios->c_iflag & PARMRK)) - port->read_status_mask |= BD_SC_BR; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= BD_SC_PR | BD_SC_FR; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= BD_SC_BR; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= BD_SC_OV; - } - /* - * !!! ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - port->read_status_mask &= ~BD_SC_EMPTY; - - spin_lock_irqsave(&port->lock, flags); - - /* Start bit has not been added (so don't, because we would just - * subtract it later), and we need to add one for the number of - * stops bits (there is always at least one). - */ - bits++; - if (IS_SMC(pinfo)) { - /* - * MRBLR can be changed while an SMC/SCC is operating only - * if it is done in a single bus cycle with one 16-bit move - * (not two 8-bit bus cycles back-to-back). This occurs when - * the cp shifts control to the next RxBD, so the change does - * not take effect immediately. To guarantee the exact RxBD - * on which the change occurs, change MRBLR only while the - * SMC/SCC receiver is disabled. - */ - out_be16(&pinfo->smcup->smc_mrblr, pinfo->rx_fifosize); - - /* Set the mode register. We want to keep a copy of the - * enables, because we want to put them back if they were - * present. - */ - prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN); - /* Output in *one* operation, so we don't interrupt RX/TX if they - * were already enabled. */ - out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | - SMCMR_SM_UART | prev_mode); - } else { - out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); - out_be16(&sccp->scc_psmr, (sbits << 12) | scval); - } - - if (pinfo->clk) - clk_set_rate(pinfo->clk, baud); - else - cpm_set_brg(pinfo->brg - 1, baud); - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *cpm_uart_type(struct uart_port *port) -{ - pr_debug("CPM uart[%d]:uart_type\n", port->line); - - return port->type == PORT_CPM ? "CPM UART" : NULL; -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int cpm_uart_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - int ret = 0; - - pr_debug("CPM uart[%d]:verify_port\n", port->line); - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= nr_irqs) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -/* - * Transmit characters, refill buffer descriptor, if possible - */ -static int cpm_uart_tx_pump(struct uart_port *port) -{ - cbd_t __iomem *bdp; - u8 *p; - int count; - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - struct circ_buf *xmit = &port->state->xmit; - - /* Handle xon/xoff */ - if (port->x_char) { - /* Pick next descriptor and fill from buffer */ - bdp = pinfo->tx_cur; - - p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); - - *p++ = port->x_char; - - out_be16(&bdp->cbd_datlen, 1); - setbits16(&bdp->cbd_sc, BD_SC_READY); - /* Get next BD. */ - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = pinfo->tx_bd_base; - else - bdp++; - pinfo->tx_cur = bdp; - - port->icount.tx++; - port->x_char = 0; - return 1; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - cpm_uart_stop_tx(port); - return 0; - } - - /* Pick next descriptor and fill from buffer */ - bdp = pinfo->tx_cur; - - while (!(in_be16(&bdp->cbd_sc) & BD_SC_READY) && - xmit->tail != xmit->head) { - count = 0; - p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); - while (count < pinfo->tx_fifosize) { - *p++ = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - count++; - if (xmit->head == xmit->tail) - break; - } - out_be16(&bdp->cbd_datlen, count); - setbits16(&bdp->cbd_sc, BD_SC_READY); - /* Get next BD. */ - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = pinfo->tx_bd_base; - else - bdp++; - } - pinfo->tx_cur = bdp; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) { - cpm_uart_stop_tx(port); - return 0; - } - - return 1; -} - -/* - * init buffer descriptors - */ -static void cpm_uart_initbd(struct uart_cpm_port *pinfo) -{ - int i; - u8 *mem_addr; - cbd_t __iomem *bdp; - - pr_debug("CPM uart[%d]:initbd\n", pinfo->port.line); - - /* Set the physical address of the host memory - * buffers in the buffer descriptors, and the - * virtual address for us to work with. - */ - mem_addr = pinfo->mem_addr; - bdp = pinfo->rx_cur = pinfo->rx_bd_base; - for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) { - out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); - out_be16(&bdp->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT); - mem_addr += pinfo->rx_fifosize; - } - - out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); - out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT); - - /* Set the physical address of the host memory - * buffers in the buffer descriptors, and the - * virtual address for us to work with. - */ - mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize); - bdp = pinfo->tx_cur = pinfo->tx_bd_base; - for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) { - out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); - out_be16(&bdp->cbd_sc, BD_SC_INTRPT); - mem_addr += pinfo->tx_fifosize; - } - - out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); - out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_INTRPT); -} - -static void cpm_uart_init_scc(struct uart_cpm_port *pinfo) -{ - scc_t __iomem *scp; - scc_uart_t __iomem *sup; - - pr_debug("CPM uart[%d]:init_scc\n", pinfo->port.line); - - scp = pinfo->sccp; - sup = pinfo->sccup; - - /* Store address */ - out_be16(&pinfo->sccup->scc_genscc.scc_rbase, - (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE); - out_be16(&pinfo->sccup->scc_genscc.scc_tbase, - (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); - - /* Set up the uart parameters in the - * parameter ram. - */ - - cpm_set_scc_fcr(sup); - - out_be16(&sup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); - out_be16(&sup->scc_maxidl, pinfo->rx_fifosize); - out_be16(&sup->scc_brkcr, 1); - out_be16(&sup->scc_parec, 0); - out_be16(&sup->scc_frmec, 0); - out_be16(&sup->scc_nosec, 0); - out_be16(&sup->scc_brkec, 0); - out_be16(&sup->scc_uaddr1, 0); - out_be16(&sup->scc_uaddr2, 0); - out_be16(&sup->scc_toseq, 0); - out_be16(&sup->scc_char1, 0x8000); - out_be16(&sup->scc_char2, 0x8000); - out_be16(&sup->scc_char3, 0x8000); - out_be16(&sup->scc_char4, 0x8000); - out_be16(&sup->scc_char5, 0x8000); - out_be16(&sup->scc_char6, 0x8000); - out_be16(&sup->scc_char7, 0x8000); - out_be16(&sup->scc_char8, 0x8000); - out_be16(&sup->scc_rccm, 0xc0ff); - - /* Send the CPM an initialize command. - */ - cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - out_be32(&scp->scc_gsmrh, 0); - out_be32(&scp->scc_gsmrl, - SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); - - /* Enable rx interrupts and clear all pending events. */ - out_be16(&scp->scc_sccm, 0); - out_be16(&scp->scc_scce, 0xffff); - out_be16(&scp->scc_dsr, 0x7e7e); - out_be16(&scp->scc_psmr, 0x3000); - - setbits32(&scp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); -} - -static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) -{ - smc_t __iomem *sp; - smc_uart_t __iomem *up; - - pr_debug("CPM uart[%d]:init_smc\n", pinfo->port.line); - - sp = pinfo->smcp; - up = pinfo->smcup; - - /* Store address */ - out_be16(&pinfo->smcup->smc_rbase, - (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE); - out_be16(&pinfo->smcup->smc_tbase, - (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); - -/* - * In case SMC1 is being relocated... - */ -#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH) - out_be16(&up->smc_rbptr, in_be16(&pinfo->smcup->smc_rbase)); - out_be16(&up->smc_tbptr, in_be16(&pinfo->smcup->smc_tbase)); - out_be32(&up->smc_rstate, 0); - out_be32(&up->smc_tstate, 0); - out_be16(&up->smc_brkcr, 1); /* number of break chars */ - out_be16(&up->smc_brkec, 0); -#endif - - /* Set up the uart parameters in the - * parameter ram. - */ - cpm_set_smc_fcr(up); - - /* Using idle character time requires some additional tuning. */ - out_be16(&up->smc_mrblr, pinfo->rx_fifosize); - out_be16(&up->smc_maxidl, pinfo->rx_fifosize); - out_be16(&up->smc_brklen, 0); - out_be16(&up->smc_brkec, 0); - out_be16(&up->smc_brkcr, 1); - - cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); - - /* Set UART mode, 8 bit, no parity, one stop. - * Enable receive and transmit. - */ - out_be16(&sp->smc_smcmr, smcr_mk_clen(9) | SMCMR_SM_UART); - - /* Enable only rx interrupts clear all pending events. */ - out_8(&sp->smc_smcm, 0); - out_8(&sp->smc_smce, 0xff); - - setbits16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN); -} - -/* - * Initialize port. This is called from early_console stuff - * so we have to be careful here ! - */ -static int cpm_uart_request_port(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - int ret; - - pr_debug("CPM uart[%d]:request port\n", port->line); - - if (pinfo->flags & FLAG_CONSOLE) - return 0; - - if (IS_SMC(pinfo)) { - clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); - clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); - } else { - clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); - clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); - } - - ret = cpm_uart_allocbuf(pinfo, 0); - - if (ret) - return ret; - - cpm_uart_initbd(pinfo); - if (IS_SMC(pinfo)) - cpm_uart_init_smc(pinfo); - else - cpm_uart_init_scc(pinfo); - - return 0; -} - -static void cpm_uart_release_port(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - - if (!(pinfo->flags & FLAG_CONSOLE)) - cpm_uart_freebuf(pinfo); -} - -/* - * Configure/autoconfigure the port. - */ -static void cpm_uart_config_port(struct uart_port *port, int flags) -{ - pr_debug("CPM uart[%d]:config_port\n", port->line); - - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_CPM; - cpm_uart_request_port(port); - } -} - -#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE) -/* - * Write a string to the serial port - * Note that this is called with interrupts already disabled - */ -static void cpm_uart_early_write(struct uart_cpm_port *pinfo, - const char *string, u_int count) -{ - unsigned int i; - cbd_t __iomem *bdp, *bdbase; - unsigned char *cpm_outp_addr; - - /* Get the address of the host memory buffer. - */ - bdp = pinfo->tx_cur; - bdbase = pinfo->tx_bd_base; - - /* - * Now, do each character. This is not as bad as it looks - * since this is a holding FIFO and not a transmitting FIFO. - * We could add the complexity of filling the entire transmit - * buffer, but we would just wait longer between accesses...... - */ - for (i = 0; i < count; i++, string++) { - /* Wait for transmitter fifo to empty. - * Ready indicates output is ready, and xmt is doing - * that, not that it is ready for us to send. - */ - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - /* Send the character out. - * If the buffer address is in the CPM DPRAM, don't - * convert it. - */ - cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), - pinfo); - *cpm_outp_addr = *string; - - out_be16(&bdp->cbd_datlen, 1); - setbits16(&bdp->cbd_sc, BD_SC_READY); - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = bdbase; - else - bdp++; - - /* if a LF, also do CR... */ - if (*string == 10) { - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), - pinfo); - *cpm_outp_addr = 13; - - out_be16(&bdp->cbd_datlen, 1); - setbits16(&bdp->cbd_sc, BD_SC_READY); - - if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) - bdp = bdbase; - else - bdp++; - } - } - - /* - * Finally, Wait for transmitter & holding register to empty - * and restore the IER - */ - while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) - ; - - pinfo->tx_cur = bdp; -} -#endif - -#ifdef CONFIG_CONSOLE_POLL -/* Serial polling routines for writing and reading from the uart while - * in an interrupt or debug context. - */ - -#define GDB_BUF_SIZE 512 /* power of 2, please */ - -static char poll_buf[GDB_BUF_SIZE]; -static char *pollp; -static int poll_chars; - -static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo) -{ - u_char c, *cp; - volatile cbd_t *bdp; - int i; - - /* Get the address of the host memory buffer. - */ - bdp = pinfo->rx_cur; - while (bdp->cbd_sc & BD_SC_EMPTY) - ; - - /* If the buffer address is in the CPM DPRAM, don't - * convert it. - */ - cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); - - if (obuf) { - i = c = bdp->cbd_datlen; - while (i-- > 0) - *obuf++ = *cp++; - } else - c = *cp; - bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID); - bdp->cbd_sc |= BD_SC_EMPTY; - - if (bdp->cbd_sc & BD_SC_WRAP) - bdp = pinfo->rx_bd_base; - else - bdp++; - pinfo->rx_cur = (cbd_t *)bdp; - - return (int)c; -} - -static int cpm_get_poll_char(struct uart_port *port) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - - if (!serial_polled) { - serial_polled = 1; - poll_chars = 0; - } - if (poll_chars <= 0) { - poll_chars = poll_wait_key(poll_buf, pinfo); - pollp = poll_buf; - } - poll_chars--; - return *pollp++; -} - -static void cpm_put_poll_char(struct uart_port *port, - unsigned char c) -{ - struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; - static char ch[2]; - - ch[0] = (char)c; - cpm_uart_early_write(pinfo, ch, 1); -} -#endif /* CONFIG_CONSOLE_POLL */ - -static struct uart_ops cpm_uart_pops = { - .tx_empty = cpm_uart_tx_empty, - .set_mctrl = cpm_uart_set_mctrl, - .get_mctrl = cpm_uart_get_mctrl, - .stop_tx = cpm_uart_stop_tx, - .start_tx = cpm_uart_start_tx, - .stop_rx = cpm_uart_stop_rx, - .enable_ms = cpm_uart_enable_ms, - .break_ctl = cpm_uart_break_ctl, - .startup = cpm_uart_startup, - .shutdown = cpm_uart_shutdown, - .set_termios = cpm_uart_set_termios, - .type = cpm_uart_type, - .release_port = cpm_uart_release_port, - .request_port = cpm_uart_request_port, - .config_port = cpm_uart_config_port, - .verify_port = cpm_uart_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = cpm_get_poll_char, - .poll_put_char = cpm_put_poll_char, -#endif -}; - -struct uart_cpm_port cpm_uart_ports[UART_NR]; - -static int cpm_uart_init_port(struct device_node *np, - struct uart_cpm_port *pinfo) -{ - const u32 *data; - void __iomem *mem, *pram; - int len; - int ret; - int i; - - data = of_get_property(np, "clock", NULL); - if (data) { - struct clk *clk = clk_get(NULL, (const char*)data); - if (!IS_ERR(clk)) - pinfo->clk = clk; - } - if (!pinfo->clk) { - data = of_get_property(np, "fsl,cpm-brg", &len); - if (!data || len != 4) { - printk(KERN_ERR "CPM UART %s has no/invalid " - "fsl,cpm-brg property.\n", np->name); - return -EINVAL; - } - pinfo->brg = *data; - } - - data = of_get_property(np, "fsl,cpm-command", &len); - if (!data || len != 4) { - printk(KERN_ERR "CPM UART %s has no/invalid " - "fsl,cpm-command property.\n", np->name); - return -EINVAL; - } - pinfo->command = *data; - - mem = of_iomap(np, 0); - if (!mem) - return -ENOMEM; - - if (of_device_is_compatible(np, "fsl,cpm1-scc-uart") || - of_device_is_compatible(np, "fsl,cpm2-scc-uart")) { - pinfo->sccp = mem; - pinfo->sccup = pram = cpm_uart_map_pram(pinfo, np); - } else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") || - of_device_is_compatible(np, "fsl,cpm2-smc-uart")) { - pinfo->flags |= FLAG_SMC; - pinfo->smcp = mem; - pinfo->smcup = pram = cpm_uart_map_pram(pinfo, np); - } else { - ret = -ENODEV; - goto out_mem; - } - - if (!pram) { - ret = -ENOMEM; - goto out_mem; - } - - pinfo->tx_nrfifos = TX_NUM_FIFO; - pinfo->tx_fifosize = TX_BUF_SIZE; - pinfo->rx_nrfifos = RX_NUM_FIFO; - pinfo->rx_fifosize = RX_BUF_SIZE; - - pinfo->port.uartclk = ppc_proc_freq; - pinfo->port.mapbase = (unsigned long)mem; - pinfo->port.type = PORT_CPM; - pinfo->port.ops = &cpm_uart_pops, - pinfo->port.iotype = UPIO_MEM; - pinfo->port.fifosize = pinfo->tx_nrfifos * pinfo->tx_fifosize; - spin_lock_init(&pinfo->port.lock); - - pinfo->port.irq = of_irq_to_resource(np, 0, NULL); - if (pinfo->port.irq == NO_IRQ) { - ret = -EINVAL; - goto out_pram; - } - - for (i = 0; i < NUM_GPIOS; i++) - pinfo->gpios[i] = of_get_gpio(np, i); - -#ifdef CONFIG_PPC_EARLY_DEBUG_CPM - udbg_putc = NULL; -#endif - - return cpm_uart_request_port(&pinfo->port); - -out_pram: - cpm_uart_unmap_pram(pinfo, pram); -out_mem: - iounmap(mem); - return ret; -} - -#ifdef CONFIG_SERIAL_CPM_CONSOLE -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * Note that this is called with interrupts already disabled - */ -static void cpm_uart_console_write(struct console *co, const char *s, - u_int count) -{ - struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index]; - unsigned long flags; - int nolock = oops_in_progress; - - if (unlikely(nolock)) { - local_irq_save(flags); - } else { - spin_lock_irqsave(&pinfo->port.lock, flags); - } - - cpm_uart_early_write(pinfo, s, count); - - if (unlikely(nolock)) { - local_irq_restore(flags); - } else { - spin_unlock_irqrestore(&pinfo->port.lock, flags); - } -} - - -static int __init cpm_uart_console_setup(struct console *co, char *options) -{ - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - int ret; - struct uart_cpm_port *pinfo; - struct uart_port *port; - - struct device_node *np = NULL; - int i = 0; - - if (co->index >= UART_NR) { - printk(KERN_ERR "cpm_uart: console index %d too high\n", - co->index); - return -ENODEV; - } - - do { - np = of_find_node_by_type(np, "serial"); - if (!np) - return -ENODEV; - - if (!of_device_is_compatible(np, "fsl,cpm1-smc-uart") && - !of_device_is_compatible(np, "fsl,cpm1-scc-uart") && - !of_device_is_compatible(np, "fsl,cpm2-smc-uart") && - !of_device_is_compatible(np, "fsl,cpm2-scc-uart")) - i--; - } while (i++ != co->index); - - pinfo = &cpm_uart_ports[co->index]; - - pinfo->flags |= FLAG_CONSOLE; - port = &pinfo->port; - - ret = cpm_uart_init_port(np, pinfo); - of_node_put(np); - if (ret) - return ret; - - if (options) { - uart_parse_options(options, &baud, &parity, &bits, &flow); - } else { - if ((baud = uart_baudrate()) == -1) - baud = 9600; - } - - if (IS_SMC(pinfo)) { - out_be16(&pinfo->smcup->smc_brkcr, 0); - cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); - clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); - clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); - } else { - out_be16(&pinfo->sccup->scc_brkcr, 0); - cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); - clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); - clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); - } - - ret = cpm_uart_allocbuf(pinfo, 1); - - if (ret) - return ret; - - cpm_uart_initbd(pinfo); - - if (IS_SMC(pinfo)) - cpm_uart_init_smc(pinfo); - else - cpm_uart_init_scc(pinfo); - - uart_set_options(port, co, baud, parity, bits, flow); - cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); - - return 0; -} - -static struct uart_driver cpm_reg; -static struct console cpm_scc_uart_console = { - .name = "ttyCPM", - .write = cpm_uart_console_write, - .device = uart_console_device, - .setup = cpm_uart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &cpm_reg, -}; - -static int __init cpm_uart_console_init(void) -{ - register_console(&cpm_scc_uart_console); - return 0; -} - -console_initcall(cpm_uart_console_init); - -#define CPM_UART_CONSOLE &cpm_scc_uart_console -#else -#define CPM_UART_CONSOLE NULL -#endif - -static struct uart_driver cpm_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyCPM", - .dev_name = "ttyCPM", - .major = SERIAL_CPM_MAJOR, - .minor = SERIAL_CPM_MINOR, - .cons = CPM_UART_CONSOLE, - .nr = UART_NR, -}; - -static int probe_index; - -static int __devinit cpm_uart_probe(struct platform_device *ofdev, - const struct of_device_id *match) -{ - int index = probe_index++; - struct uart_cpm_port *pinfo = &cpm_uart_ports[index]; - int ret; - - pinfo->port.line = index; - - if (index >= UART_NR) - return -ENODEV; - - dev_set_drvdata(&ofdev->dev, pinfo); - - /* initialize the device pointer for the port */ - pinfo->port.dev = &ofdev->dev; - - ret = cpm_uart_init_port(ofdev->dev.of_node, pinfo); - if (ret) - return ret; - - return uart_add_one_port(&cpm_reg, &pinfo->port); -} - -static int __devexit cpm_uart_remove(struct platform_device *ofdev) -{ - struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev); - return uart_remove_one_port(&cpm_reg, &pinfo->port); -} - -static struct of_device_id cpm_uart_match[] = { - { - .compatible = "fsl,cpm1-smc-uart", - }, - { - .compatible = "fsl,cpm1-scc-uart", - }, - { - .compatible = "fsl,cpm2-smc-uart", - }, - { - .compatible = "fsl,cpm2-scc-uart", - }, - {} -}; - -static struct of_platform_driver cpm_uart_driver = { - .driver = { - .name = "cpm_uart", - .owner = THIS_MODULE, - .of_match_table = cpm_uart_match, - }, - .probe = cpm_uart_probe, - .remove = cpm_uart_remove, - }; - -static int __init cpm_uart_init(void) -{ - int ret = uart_register_driver(&cpm_reg); - if (ret) - return ret; - - ret = of_register_platform_driver(&cpm_uart_driver); - if (ret) - uart_unregister_driver(&cpm_reg); - - return ret; -} - -static void __exit cpm_uart_exit(void) -{ - of_unregister_platform_driver(&cpm_uart_driver); - uart_unregister_driver(&cpm_reg); -} - -module_init(cpm_uart_init); -module_exit(cpm_uart_exit); - -MODULE_AUTHOR("Kumar Gala/Antoniou Pantelis"); -MODULE_DESCRIPTION("CPM SCC/SMC port driver $Revision: 0.01 $"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV(SERIAL_CPM_MAJOR, SERIAL_CPM_MINOR); diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c deleted file mode 100644 index 3fc1d66e32c6..000000000000 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * linux/drivers/serial/cpm_uart.c - * - * Driver for CPM (SCC/SMC) serial ports; CPM1 definitions - * - * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) - * Pantelis Antoniou (panto@intracom.gr) (CPM1) - * - * Copyright (C) 2004 Freescale Semiconductor, Inc. - * (C) 2004 Intracom, S.A. - * (C) 2006 MontaVista Software, Inc. - * Vitaly Bordug - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include - -#include "cpm_uart.h" - -/**************************************************************/ - -void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) -{ - cpm_command(port->command, cmd); -} - -void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, - struct device_node *np) -{ - return of_iomap(np, 1); -} - -void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) -{ - iounmap(pram); -} - -/* - * Allocate DP-Ram and memory buffers. We need to allocate a transmit and - * receive buffer descriptors from dual port ram, and a character - * buffer area from host mem. If we are allocating for the console we need - * to do it from bootmem - */ -int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) -{ - int dpmemsz, memsz; - u8 *dp_mem; - unsigned long dp_offset; - u8 *mem_addr; - dma_addr_t dma_addr = 0; - - pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); - - dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); - dp_offset = cpm_dpalloc(dpmemsz, 8); - if (IS_ERR_VALUE(dp_offset)) { - printk(KERN_ERR - "cpm_uart_cpm1.c: could not allocate buffer descriptors\n"); - return -ENOMEM; - } - dp_mem = cpm_dpram_addr(dp_offset); - - memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + - L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); - if (is_con) { - /* was hostalloc but changed cause it blows away the */ - /* large tlb mapping when pinning the kernel area */ - mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8)); - dma_addr = (u32)cpm_dpram_phys(mem_addr); - } else - mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, - GFP_KERNEL); - - if (mem_addr == NULL) { - cpm_dpfree(dp_offset); - printk(KERN_ERR - "cpm_uart_cpm1.c: could not allocate coherent memory\n"); - return -ENOMEM; - } - - pinfo->dp_addr = dp_offset; - pinfo->mem_addr = mem_addr; /* virtual address*/ - pinfo->dma_addr = dma_addr; /* physical address*/ - pinfo->mem_size = memsz; - - pinfo->rx_buf = mem_addr; - pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos - * pinfo->rx_fifosize); - - pinfo->rx_bd_base = (cbd_t __iomem __force *)dp_mem; - pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; - - return 0; -} - -void cpm_uart_freebuf(struct uart_cpm_port *pinfo) -{ - dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos * - pinfo->rx_fifosize) + - L1_CACHE_ALIGN(pinfo->tx_nrfifos * - pinfo->tx_fifosize), pinfo->mem_addr, - pinfo->dma_addr); - - cpm_dpfree(pinfo->dp_addr); -} diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h deleted file mode 100644 index 10eecd6af6d4..000000000000 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * linux/drivers/serial/cpm_uart/cpm_uart_cpm1.h - * - * Driver for CPM (SCC/SMC) serial ports - * - * definitions for cpm1 - * - */ - -#ifndef CPM_UART_CPM1_H -#define CPM_UART_CPM1_H - -#include - -static inline void cpm_set_brg(int brg, int baud) -{ - cpm_setbrg(brg, baud); -} - -static inline void cpm_set_scc_fcr(scc_uart_t __iomem * sup) -{ - out_8(&sup->scc_genscc.scc_rfcr, SMC_EB); - out_8(&sup->scc_genscc.scc_tfcr, SMC_EB); -} - -static inline void cpm_set_smc_fcr(smc_uart_t __iomem * up) -{ - out_8(&up->smc_rfcr, SMC_EB); - out_8(&up->smc_tfcr, SMC_EB); -} - -#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0)) - -#endif diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c deleted file mode 100644 index 814ac006393f..000000000000 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * linux/drivers/serial/cpm_uart_cpm2.c - * - * Driver for CPM (SCC/SMC) serial ports; CPM2 definitions - * - * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) - * Pantelis Antoniou (panto@intracom.gr) (CPM1) - * - * Copyright (C) 2004 Freescale Semiconductor, Inc. - * (C) 2004 Intracom, S.A. - * (C) 2006 MontaVista Software, Inc. - * Vitaly Bordug - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#include "cpm_uart.h" - -/**************************************************************/ - -void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) -{ - cpm_command(port->command, cmd); -} - -void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, - struct device_node *np) -{ - void __iomem *pram; - unsigned long offset; - struct resource res; - resource_size_t len; - - /* Don't remap parameter RAM if it has already been initialized - * during console setup. - */ - if (IS_SMC(port) && port->smcup) - return port->smcup; - else if (!IS_SMC(port) && port->sccup) - return port->sccup; - - if (of_address_to_resource(np, 1, &res)) - return NULL; - - len = resource_size(&res); - pram = ioremap(res.start, len); - if (!pram) - return NULL; - - if (!IS_SMC(port)) - return pram; - - if (len != 2) { - printk(KERN_WARNING "cpm_uart[%d]: device tree references " - "SMC pram, using boot loader/wrapper pram mapping. " - "Please fix your device tree to reference the pram " - "base register instead.\n", - port->port.line); - return pram; - } - - offset = cpm_dpalloc(PROFF_SMC_SIZE, 64); - out_be16(pram, offset); - iounmap(pram); - return cpm_muram_addr(offset); -} - -void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) -{ - if (!IS_SMC(port)) - iounmap(pram); -} - -/* - * Allocate DP-Ram and memory buffers. We need to allocate a transmit and - * receive buffer descriptors from dual port ram, and a character - * buffer area from host mem. If we are allocating for the console we need - * to do it from bootmem - */ -int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) -{ - int dpmemsz, memsz; - u8 __iomem *dp_mem; - unsigned long dp_offset; - u8 *mem_addr; - dma_addr_t dma_addr = 0; - - pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); - - dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); - dp_offset = cpm_dpalloc(dpmemsz, 8); - if (IS_ERR_VALUE(dp_offset)) { - printk(KERN_ERR - "cpm_uart_cpm.c: could not allocate buffer descriptors\n"); - return -ENOMEM; - } - - dp_mem = cpm_dpram_addr(dp_offset); - - memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + - L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); - if (is_con) { - mem_addr = kzalloc(memsz, GFP_NOWAIT); - dma_addr = virt_to_bus(mem_addr); - } - else - mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, - GFP_KERNEL); - - if (mem_addr == NULL) { - cpm_dpfree(dp_offset); - printk(KERN_ERR - "cpm_uart_cpm.c: could not allocate coherent memory\n"); - return -ENOMEM; - } - - pinfo->dp_addr = dp_offset; - pinfo->mem_addr = mem_addr; - pinfo->dma_addr = dma_addr; - pinfo->mem_size = memsz; - - pinfo->rx_buf = mem_addr; - pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos - * pinfo->rx_fifosize); - - pinfo->rx_bd_base = (cbd_t __iomem *)dp_mem; - pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; - - return 0; -} - -void cpm_uart_freebuf(struct uart_cpm_port *pinfo) -{ - dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos * - pinfo->rx_fifosize) + - L1_CACHE_ALIGN(pinfo->tx_nrfifos * - pinfo->tx_fifosize), (void __force *)pinfo->mem_addr, - pinfo->dma_addr); - - cpm_dpfree(pinfo->dp_addr); -} diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h deleted file mode 100644 index 7194c63dcf5f..000000000000 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * linux/drivers/serial/cpm_uart/cpm_uart_cpm2.h - * - * Driver for CPM (SCC/SMC) serial ports - * - * definitions for cpm2 - * - */ - -#ifndef CPM_UART_CPM2_H -#define CPM_UART_CPM2_H - -#include - -static inline void cpm_set_brg(int brg, int baud) -{ - cpm_setbrg(brg, baud); -} - -static inline void cpm_set_scc_fcr(scc_uart_t __iomem *sup) -{ - out_8(&sup->scc_genscc.scc_rfcr, CPMFCR_GBL | CPMFCR_EB); - out_8(&sup->scc_genscc.scc_tfcr, CPMFCR_GBL | CPMFCR_EB); -} - -static inline void cpm_set_smc_fcr(smc_uart_t __iomem *up) -{ - out_8(&up->smc_rfcr, CPMFCR_GBL | CPMFCR_EB); - out_8(&up->smc_tfcr, CPMFCR_GBL | CPMFCR_EB); -} - -#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0)) - -#endif diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c deleted file mode 100644 index bcc31f2140ac..000000000000 --- a/drivers/serial/crisv10.c +++ /dev/null @@ -1,4573 +0,0 @@ -/* - * Serial port driver for the ETRAX 100LX chip - * - * Copyright (C) 1998-2007 Axis Communications AB - * - * Many, many authors. Based once upon a time on serial.c for 16x50. - * - */ - -static char *serial_version = "$Revision: 1.25 $"; - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -/* non-arch dependent serial structures are in linux/serial.h */ -#include -/* while we keep our own stuff (struct e100_serial) in a local .h file */ -#include "crisv10.h" -#include -#include - -#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER -#ifndef CONFIG_ETRAX_FAST_TIMER -#error "Enable FAST_TIMER to use SERIAL_FAST_TIMER" -#endif -#endif - -#if defined(CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS) && \ - (CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS == 0) -#error "RX_TIMEOUT_TICKS == 0 not allowed, use 1" -#endif - -#if defined(CONFIG_ETRAX_RS485_ON_PA) && defined(CONFIG_ETRAX_RS485_ON_PORT_G) -#error "Disable either CONFIG_ETRAX_RS485_ON_PA or CONFIG_ETRAX_RS485_ON_PORT_G" -#endif - -/* - * All of the compatibilty code so we can compile serial.c against - * older kernels is hidden in serial_compat.h - */ -#if defined(LOCAL_HEADERS) -#include "serial_compat.h" -#endif - -struct tty_driver *serial_driver; - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - -//#define SERIAL_DEBUG_INTR -//#define SERIAL_DEBUG_OPEN -//#define SERIAL_DEBUG_FLOW -//#define SERIAL_DEBUG_DATA -//#define SERIAL_DEBUG_THROTTLE -//#define SERIAL_DEBUG_IO /* Debug for Extra control and status pins */ -//#define SERIAL_DEBUG_LINE 0 /* What serport we want to debug */ - -/* Enable this to use serial interrupts to handle when you - expect the first received event on the serial port to - be an error, break or similar. Used to be able to flash IRMA - from eLinux */ -#define SERIAL_HANDLE_EARLY_ERRORS - -/* Currently 16 descriptors x 128 bytes = 2048 bytes */ -#define SERIAL_DESCR_BUF_SIZE 256 - -#define SERIAL_PRESCALE_BASE 3125000 /* 3.125MHz */ -#define DEF_BAUD_BASE SERIAL_PRESCALE_BASE - -/* We don't want to load the system with massive fast timer interrupt - * on high baudrates so limit it to 250 us (4kHz) */ -#define MIN_FLUSH_TIME_USEC 250 - -/* Add an x here to log a lot of timer stuff */ -#define TIMERD(x) -/* Debug details of interrupt handling */ -#define DINTR1(x) /* irq on/off, errors */ -#define DINTR2(x) /* tx and rx */ -/* Debug flip buffer stuff */ -#define DFLIP(x) -/* Debug flow control and overview of data flow */ -#define DFLOW(x) -#define DBAUD(x) -#define DLOG_INT_TRIG(x) - -//#define DEBUG_LOG_INCLUDED -#ifndef DEBUG_LOG_INCLUDED -#define DEBUG_LOG(line, string, value) -#else -struct debug_log_info -{ - unsigned long time; - unsigned long timer_data; -// int line; - const char *string; - int value; -}; -#define DEBUG_LOG_SIZE 4096 - -struct debug_log_info debug_log[DEBUG_LOG_SIZE]; -int debug_log_pos = 0; - -#define DEBUG_LOG(_line, _string, _value) do { \ - if ((_line) == SERIAL_DEBUG_LINE) {\ - debug_log_func(_line, _string, _value); \ - }\ -}while(0) - -void debug_log_func(int line, const char *string, int value) -{ - if (debug_log_pos < DEBUG_LOG_SIZE) { - debug_log[debug_log_pos].time = jiffies; - debug_log[debug_log_pos].timer_data = *R_TIMER_DATA; -// debug_log[debug_log_pos].line = line; - debug_log[debug_log_pos].string = string; - debug_log[debug_log_pos].value = value; - debug_log_pos++; - } - /*printk(string, value);*/ -} -#endif - -#ifndef CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS -/* Default number of timer ticks before flushing rx fifo - * When using "little data, low latency applications: use 0 - * When using "much data applications (PPP)" use ~5 - */ -#define CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS 5 -#endif - -unsigned long timer_data_to_ns(unsigned long timer_data); - -static void change_speed(struct e100_serial *info); -static void rs_throttle(struct tty_struct * tty); -static void rs_wait_until_sent(struct tty_struct *tty, int timeout); -static int rs_write(struct tty_struct *tty, - const unsigned char *buf, int count); -#ifdef CONFIG_ETRAX_RS485 -static int e100_write_rs485(struct tty_struct *tty, - const unsigned char *buf, int count); -#endif -static int get_lsr_info(struct e100_serial *info, unsigned int *value); - - -#define DEF_BAUD 115200 /* 115.2 kbit/s */ -#define STD_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) -#define DEF_RX 0x20 /* or SERIAL_CTRL_W >> 8 */ -/* Default value of tx_ctrl register: has txd(bit 7)=1 (idle) as default */ -#define DEF_TX 0x80 /* or SERIAL_CTRL_B */ - -/* offsets from R_SERIALx_CTRL */ - -#define REG_DATA 0 -#define REG_DATA_STATUS32 0 /* this is the 32 bit register R_SERIALx_READ */ -#define REG_TR_DATA 0 -#define REG_STATUS 1 -#define REG_TR_CTRL 1 -#define REG_REC_CTRL 2 -#define REG_BAUD 3 -#define REG_XOFF 4 /* this is a 32 bit register */ - -/* The bitfields are the same for all serial ports */ -#define SER_RXD_MASK IO_MASK(R_SERIAL0_STATUS, rxd) -#define SER_DATA_AVAIL_MASK IO_MASK(R_SERIAL0_STATUS, data_avail) -#define SER_FRAMING_ERR_MASK IO_MASK(R_SERIAL0_STATUS, framing_err) -#define SER_PAR_ERR_MASK IO_MASK(R_SERIAL0_STATUS, par_err) -#define SER_OVERRUN_MASK IO_MASK(R_SERIAL0_STATUS, overrun) - -#define SER_ERROR_MASK (SER_OVERRUN_MASK | SER_PAR_ERR_MASK | SER_FRAMING_ERR_MASK) - -/* Values for info->errorcode */ -#define ERRCODE_SET_BREAK (TTY_BREAK) -#define ERRCODE_INSERT 0x100 -#define ERRCODE_INSERT_BREAK (ERRCODE_INSERT | TTY_BREAK) - -#define FORCE_EOP(info) *R_SET_EOP = 1U << info->iseteop; - -/* - * General note regarding the use of IO_* macros in this file: - * - * We will use the bits defined for DMA channel 6 when using various - * IO_* macros (e.g. IO_STATE, IO_MASK, IO_EXTRACT) and _assume_ they are - * the same for all channels (which of course they are). - * - * We will also use the bits defined for serial port 0 when writing commands - * to the different ports, as these bits too are the same for all ports. - */ - - -/* Mask for the irqs possibly enabled in R_IRQ_MASK1_RD etc. */ -static const unsigned long e100_ser_int_mask = 0 -#ifdef CONFIG_ETRAX_SERIAL_PORT0 -| IO_MASK(R_IRQ_MASK1_RD, ser0_data) | IO_MASK(R_IRQ_MASK1_RD, ser0_ready) -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT1 -| IO_MASK(R_IRQ_MASK1_RD, ser1_data) | IO_MASK(R_IRQ_MASK1_RD, ser1_ready) -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT2 -| IO_MASK(R_IRQ_MASK1_RD, ser2_data) | IO_MASK(R_IRQ_MASK1_RD, ser2_ready) -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT3 -| IO_MASK(R_IRQ_MASK1_RD, ser3_data) | IO_MASK(R_IRQ_MASK1_RD, ser3_ready) -#endif -; -unsigned long r_alt_ser_baudrate_shadow = 0; - -/* this is the data for the four serial ports in the etrax100 */ -/* DMA2(ser2), DMA4(ser3), DMA6(ser0) or DMA8(ser1) */ -/* R_DMA_CHx_CLR_INTR, R_DMA_CHx_FIRST, R_DMA_CHx_CMD */ - -static struct e100_serial rs_table[] = { - { .baud = DEF_BAUD, - .ioport = (unsigned char *)R_SERIAL0_CTRL, - .irq = 1U << 12, /* uses DMA 6 and 7 */ - .oclrintradr = R_DMA_CH6_CLR_INTR, - .ofirstadr = R_DMA_CH6_FIRST, - .ocmdadr = R_DMA_CH6_CMD, - .ostatusadr = R_DMA_CH6_STATUS, - .iclrintradr = R_DMA_CH7_CLR_INTR, - .ifirstadr = R_DMA_CH7_FIRST, - .icmdadr = R_DMA_CH7_CMD, - .idescradr = R_DMA_CH7_DESCR, - .flags = STD_FLAGS, - .rx_ctrl = DEF_RX, - .tx_ctrl = DEF_TX, - .iseteop = 2, - .dma_owner = dma_ser0, - .io_if = if_serial_0, -#ifdef CONFIG_ETRAX_SERIAL_PORT0 - .enabled = 1, -#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT - .dma_out_enabled = 1, - .dma_out_nbr = SER0_TX_DMA_NBR, - .dma_out_irq_nbr = SER0_DMA_TX_IRQ_NBR, - .dma_out_irq_flags = IRQF_DISABLED, - .dma_out_irq_description = "serial 0 dma tr", -#else - .dma_out_enabled = 0, - .dma_out_nbr = UINT_MAX, - .dma_out_irq_nbr = 0, - .dma_out_irq_flags = 0, - .dma_out_irq_description = NULL, -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN - .dma_in_enabled = 1, - .dma_in_nbr = SER0_RX_DMA_NBR, - .dma_in_irq_nbr = SER0_DMA_RX_IRQ_NBR, - .dma_in_irq_flags = IRQF_DISABLED, - .dma_in_irq_description = "serial 0 dma rec", -#else - .dma_in_enabled = 0, - .dma_in_nbr = UINT_MAX, - .dma_in_irq_nbr = 0, - .dma_in_irq_flags = 0, - .dma_in_irq_description = NULL, -#endif -#else - .enabled = 0, - .io_if_description = NULL, - .dma_out_enabled = 0, - .dma_in_enabled = 0 -#endif - -}, /* ttyS0 */ -#ifndef CONFIG_SVINTO_SIM - { .baud = DEF_BAUD, - .ioport = (unsigned char *)R_SERIAL1_CTRL, - .irq = 1U << 16, /* uses DMA 8 and 9 */ - .oclrintradr = R_DMA_CH8_CLR_INTR, - .ofirstadr = R_DMA_CH8_FIRST, - .ocmdadr = R_DMA_CH8_CMD, - .ostatusadr = R_DMA_CH8_STATUS, - .iclrintradr = R_DMA_CH9_CLR_INTR, - .ifirstadr = R_DMA_CH9_FIRST, - .icmdadr = R_DMA_CH9_CMD, - .idescradr = R_DMA_CH9_DESCR, - .flags = STD_FLAGS, - .rx_ctrl = DEF_RX, - .tx_ctrl = DEF_TX, - .iseteop = 3, - .dma_owner = dma_ser1, - .io_if = if_serial_1, -#ifdef CONFIG_ETRAX_SERIAL_PORT1 - .enabled = 1, - .io_if_description = "ser1", -#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT - .dma_out_enabled = 1, - .dma_out_nbr = SER1_TX_DMA_NBR, - .dma_out_irq_nbr = SER1_DMA_TX_IRQ_NBR, - .dma_out_irq_flags = IRQF_DISABLED, - .dma_out_irq_description = "serial 1 dma tr", -#else - .dma_out_enabled = 0, - .dma_out_nbr = UINT_MAX, - .dma_out_irq_nbr = 0, - .dma_out_irq_flags = 0, - .dma_out_irq_description = NULL, -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN - .dma_in_enabled = 1, - .dma_in_nbr = SER1_RX_DMA_NBR, - .dma_in_irq_nbr = SER1_DMA_RX_IRQ_NBR, - .dma_in_irq_flags = IRQF_DISABLED, - .dma_in_irq_description = "serial 1 dma rec", -#else - .dma_in_enabled = 0, - .dma_in_enabled = 0, - .dma_in_nbr = UINT_MAX, - .dma_in_irq_nbr = 0, - .dma_in_irq_flags = 0, - .dma_in_irq_description = NULL, -#endif -#else - .enabled = 0, - .io_if_description = NULL, - .dma_in_irq_nbr = 0, - .dma_out_enabled = 0, - .dma_in_enabled = 0 -#endif -}, /* ttyS1 */ - - { .baud = DEF_BAUD, - .ioport = (unsigned char *)R_SERIAL2_CTRL, - .irq = 1U << 4, /* uses DMA 2 and 3 */ - .oclrintradr = R_DMA_CH2_CLR_INTR, - .ofirstadr = R_DMA_CH2_FIRST, - .ocmdadr = R_DMA_CH2_CMD, - .ostatusadr = R_DMA_CH2_STATUS, - .iclrintradr = R_DMA_CH3_CLR_INTR, - .ifirstadr = R_DMA_CH3_FIRST, - .icmdadr = R_DMA_CH3_CMD, - .idescradr = R_DMA_CH3_DESCR, - .flags = STD_FLAGS, - .rx_ctrl = DEF_RX, - .tx_ctrl = DEF_TX, - .iseteop = 0, - .dma_owner = dma_ser2, - .io_if = if_serial_2, -#ifdef CONFIG_ETRAX_SERIAL_PORT2 - .enabled = 1, - .io_if_description = "ser2", -#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT - .dma_out_enabled = 1, - .dma_out_nbr = SER2_TX_DMA_NBR, - .dma_out_irq_nbr = SER2_DMA_TX_IRQ_NBR, - .dma_out_irq_flags = IRQF_DISABLED, - .dma_out_irq_description = "serial 2 dma tr", -#else - .dma_out_enabled = 0, - .dma_out_nbr = UINT_MAX, - .dma_out_irq_nbr = 0, - .dma_out_irq_flags = 0, - .dma_out_irq_description = NULL, -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN - .dma_in_enabled = 1, - .dma_in_nbr = SER2_RX_DMA_NBR, - .dma_in_irq_nbr = SER2_DMA_RX_IRQ_NBR, - .dma_in_irq_flags = IRQF_DISABLED, - .dma_in_irq_description = "serial 2 dma rec", -#else - .dma_in_enabled = 0, - .dma_in_nbr = UINT_MAX, - .dma_in_irq_nbr = 0, - .dma_in_irq_flags = 0, - .dma_in_irq_description = NULL, -#endif -#else - .enabled = 0, - .io_if_description = NULL, - .dma_out_enabled = 0, - .dma_in_enabled = 0 -#endif - }, /* ttyS2 */ - - { .baud = DEF_BAUD, - .ioport = (unsigned char *)R_SERIAL3_CTRL, - .irq = 1U << 8, /* uses DMA 4 and 5 */ - .oclrintradr = R_DMA_CH4_CLR_INTR, - .ofirstadr = R_DMA_CH4_FIRST, - .ocmdadr = R_DMA_CH4_CMD, - .ostatusadr = R_DMA_CH4_STATUS, - .iclrintradr = R_DMA_CH5_CLR_INTR, - .ifirstadr = R_DMA_CH5_FIRST, - .icmdadr = R_DMA_CH5_CMD, - .idescradr = R_DMA_CH5_DESCR, - .flags = STD_FLAGS, - .rx_ctrl = DEF_RX, - .tx_ctrl = DEF_TX, - .iseteop = 1, - .dma_owner = dma_ser3, - .io_if = if_serial_3, -#ifdef CONFIG_ETRAX_SERIAL_PORT3 - .enabled = 1, - .io_if_description = "ser3", -#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT - .dma_out_enabled = 1, - .dma_out_nbr = SER3_TX_DMA_NBR, - .dma_out_irq_nbr = SER3_DMA_TX_IRQ_NBR, - .dma_out_irq_flags = IRQF_DISABLED, - .dma_out_irq_description = "serial 3 dma tr", -#else - .dma_out_enabled = 0, - .dma_out_nbr = UINT_MAX, - .dma_out_irq_nbr = 0, - .dma_out_irq_flags = 0, - .dma_out_irq_description = NULL, -#endif -#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN - .dma_in_enabled = 1, - .dma_in_nbr = SER3_RX_DMA_NBR, - .dma_in_irq_nbr = SER3_DMA_RX_IRQ_NBR, - .dma_in_irq_flags = IRQF_DISABLED, - .dma_in_irq_description = "serial 3 dma rec", -#else - .dma_in_enabled = 0, - .dma_in_nbr = UINT_MAX, - .dma_in_irq_nbr = 0, - .dma_in_irq_flags = 0, - .dma_in_irq_description = NULL -#endif -#else - .enabled = 0, - .io_if_description = NULL, - .dma_out_enabled = 0, - .dma_in_enabled = 0 -#endif - } /* ttyS3 */ -#endif -}; - - -#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial)) - -#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER -static struct fast_timer fast_timers[NR_PORTS]; -#endif - -#ifdef CONFIG_ETRAX_SERIAL_PROC_ENTRY -#define PROCSTAT(x) x -struct ser_statistics_type { - int overrun_cnt; - int early_errors_cnt; - int ser_ints_ok_cnt; - int errors_cnt; - unsigned long int processing_flip; - unsigned long processing_flip_still_room; - unsigned long int timeout_flush_cnt; - int rx_dma_ints; - int tx_dma_ints; - int rx_tot; - int tx_tot; -}; - -static struct ser_statistics_type ser_stat[NR_PORTS]; - -#else - -#define PROCSTAT(x) - -#endif /* CONFIG_ETRAX_SERIAL_PROC_ENTRY */ - -/* RS-485 */ -#if defined(CONFIG_ETRAX_RS485) -#ifdef CONFIG_ETRAX_FAST_TIMER -static struct fast_timer fast_timers_rs485[NR_PORTS]; -#endif -#if defined(CONFIG_ETRAX_RS485_ON_PA) -static int rs485_pa_bit = CONFIG_ETRAX_RS485_ON_PA_BIT; -#endif -#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) -static int rs485_port_g_bit = CONFIG_ETRAX_RS485_ON_PORT_G_BIT; -#endif -#endif - -/* Info and macros needed for each ports extra control/status signals. */ -#define E100_STRUCT_PORT(line, pinname) \ - ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ - (R_PORT_PA_DATA): ( \ - (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \ - (R_PORT_PB_DATA):&dummy_ser[line])) - -#define E100_STRUCT_SHADOW(line, pinname) \ - ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ - (&port_pa_data_shadow): ( \ - (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \ - (&port_pb_data_shadow):&dummy_ser[line])) -#define E100_STRUCT_MASK(line, pinname) \ - ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ - (1<= 0)? \ - (1< 3.3V to RS-232 driver -> -12V on RS-232 level - * inactive = 1 -> 0V to RS-232 driver -> +12V on RS-232 level - * - * These macros returns the pin value: 0=0V, >=1 = 3.3V on ETRAX chip - */ - -/* Output */ -#define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK) -/* Input */ -#define E100_CTS_GET(info) ((info)->ioport[REG_STATUS] & E100_CTS_MASK) - -/* These are typically PA or PB and 0 means 0V, 1 means 3.3V */ -/* Is an output */ -#define E100_DTR_GET(info) ((*e100_modem_pins[(info)->line].dtr_shadow) & e100_modem_pins[(info)->line].dtr_mask) - -/* Normally inputs */ -#define E100_RI_GET(info) ((*e100_modem_pins[(info)->line].ri_port) & e100_modem_pins[(info)->line].ri_mask) -#define E100_CD_GET(info) ((*e100_modem_pins[(info)->line].cd_port) & e100_modem_pins[(info)->line].cd_mask) - -/* Input */ -#define E100_DSR_GET(info) ((*e100_modem_pins[(info)->line].dsr_port) & e100_modem_pins[(info)->line].dsr_mask) - - -/* - * tmp_buf is used as a temporary buffer by serial_write. We need to - * lock it in case the memcpy_fromfs blocks while swapping in a page, - * and some other program tries to do a serial write at the same time. - * Since the lock will only come under contention when the system is - * swapping and available memory is low, it makes sense to share one - * buffer across all the serial ports, since it significantly saves - * memory if large numbers of serial ports are open. - */ -static unsigned char *tmp_buf; -static DEFINE_MUTEX(tmp_buf_mutex); - -/* Calculate the chartime depending on baudrate, numbor of bits etc. */ -static void update_char_time(struct e100_serial * info) -{ - tcflag_t cflags = info->port.tty->termios->c_cflag; - int bits; - - /* calc. number of bits / data byte */ - /* databits + startbit and 1 stopbit */ - if ((cflags & CSIZE) == CS7) - bits = 9; - else - bits = 10; - - if (cflags & CSTOPB) /* 2 stopbits ? */ - bits++; - - if (cflags & PARENB) /* parity bit ? */ - bits++; - - /* calc timeout */ - info->char_time_usec = ((bits * 1000000) / info->baud) + 1; - info->flush_time_usec = 4*info->char_time_usec; - if (info->flush_time_usec < MIN_FLUSH_TIME_USEC) - info->flush_time_usec = MIN_FLUSH_TIME_USEC; - -} - -/* - * This function maps from the Bxxxx defines in asm/termbits.h into real - * baud rates. - */ - -static int -cflag_to_baud(unsigned int cflag) -{ - static int baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, - 4800, 9600, 19200, 38400 }; - - static int ext_baud_table[] = { - 0, 57600, 115200, 230400, 460800, 921600, 1843200, 6250000, - 0, 0, 0, 0, 0, 0, 0, 0 }; - - if (cflag & CBAUDEX) - return ext_baud_table[(cflag & CBAUD) & ~CBAUDEX]; - else - return baud_table[cflag & CBAUD]; -} - -/* and this maps to an etrax100 hardware baud constant */ - -static unsigned char -cflag_to_etrax_baud(unsigned int cflag) -{ - char retval; - - static char baud_table[] = { - -1, -1, -1, -1, -1, -1, -1, 0, 1, 2, -1, 3, 4, 5, 6, 7 }; - - static char ext_baud_table[] = { - -1, 8, 9, 10, 11, 12, 13, 14, -1, -1, -1, -1, -1, -1, -1, -1 }; - - if (cflag & CBAUDEX) - retval = ext_baud_table[(cflag & CBAUD) & ~CBAUDEX]; - else - retval = baud_table[cflag & CBAUD]; - - if (retval < 0) { - printk(KERN_WARNING "serdriver tried setting invalid baud rate, flags %x.\n", cflag); - retval = 5; /* choose default 9600 instead */ - } - - return retval | (retval << 4); /* choose same for both TX and RX */ -} - - -/* Various static support functions */ - -/* Functions to set or clear DTR/RTS on the requested line */ -/* It is complicated by the fact that RTS is a serial port register, while - * DTR might not be implemented in the HW at all, and if it is, it can be on - * any general port. - */ - - -static inline void -e100_dtr(struct e100_serial *info, int set) -{ -#ifndef CONFIG_SVINTO_SIM - unsigned char mask = e100_modem_pins[info->line].dtr_mask; - -#ifdef SERIAL_DEBUG_IO - printk("ser%i dtr %i mask: 0x%02X\n", info->line, set, mask); - printk("ser%i shadow before 0x%02X get: %i\n", - info->line, *e100_modem_pins[info->line].dtr_shadow, - E100_DTR_GET(info)); -#endif - /* DTR is active low */ - { - unsigned long flags; - - local_irq_save(flags); - *e100_modem_pins[info->line].dtr_shadow &= ~mask; - *e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask); - *e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow; - local_irq_restore(flags); - } - -#ifdef SERIAL_DEBUG_IO - printk("ser%i shadow after 0x%02X get: %i\n", - info->line, *e100_modem_pins[info->line].dtr_shadow, - E100_DTR_GET(info)); -#endif -#endif -} - -/* set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive - * 0=0V , 1=3.3V - */ -static inline void -e100_rts(struct e100_serial *info, int set) -{ -#ifndef CONFIG_SVINTO_SIM - unsigned long flags; - local_irq_save(flags); - info->rx_ctrl &= ~E100_RTS_MASK; - info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */ - info->ioport[REG_REC_CTRL] = info->rx_ctrl; - local_irq_restore(flags); -#ifdef SERIAL_DEBUG_IO - printk("ser%i rts %i\n", info->line, set); -#endif -#endif -} - - -/* If this behaves as a modem, RI and CD is an output */ -static inline void -e100_ri_out(struct e100_serial *info, int set) -{ -#ifndef CONFIG_SVINTO_SIM - /* RI is active low */ - { - unsigned char mask = e100_modem_pins[info->line].ri_mask; - unsigned long flags; - - local_irq_save(flags); - *e100_modem_pins[info->line].ri_shadow &= ~mask; - *e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask); - *e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow; - local_irq_restore(flags); - } -#endif -} -static inline void -e100_cd_out(struct e100_serial *info, int set) -{ -#ifndef CONFIG_SVINTO_SIM - /* CD is active low */ - { - unsigned char mask = e100_modem_pins[info->line].cd_mask; - unsigned long flags; - - local_irq_save(flags); - *e100_modem_pins[info->line].cd_shadow &= ~mask; - *e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask); - *e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow; - local_irq_restore(flags); - } -#endif -} - -static inline void -e100_disable_rx(struct e100_serial *info) -{ -#ifndef CONFIG_SVINTO_SIM - /* disable the receiver */ - info->ioport[REG_REC_CTRL] = - (info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); -#endif -} - -static inline void -e100_enable_rx(struct e100_serial *info) -{ -#ifndef CONFIG_SVINTO_SIM - /* enable the receiver */ - info->ioport[REG_REC_CTRL] = - (info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); -#endif -} - -/* the rx DMA uses both the dma_descr and the dma_eop interrupts */ - -static inline void -e100_disable_rxdma_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("rxdma_irq(%d): 0\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ disable_rxdma_irq %i\n", info->line)); - *R_IRQ_MASK2_CLR = (info->irq << 2) | (info->irq << 3); -} - -static inline void -e100_enable_rxdma_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("rxdma_irq(%d): 1\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ enable_rxdma_irq %i\n", info->line)); - *R_IRQ_MASK2_SET = (info->irq << 2) | (info->irq << 3); -} - -/* the tx DMA uses only dma_descr interrupt */ - -static void e100_disable_txdma_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("txdma_irq(%d): 0\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ disable_txdma_irq %i\n", info->line)); - *R_IRQ_MASK2_CLR = info->irq; -} - -static void e100_enable_txdma_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("txdma_irq(%d): 1\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ enable_txdma_irq %i\n", info->line)); - *R_IRQ_MASK2_SET = info->irq; -} - -static void e100_disable_txdma_channel(struct e100_serial *info) -{ - unsigned long flags; - - /* Disable output DMA channel for the serial port in question - * ( set to something other than serialX) - */ - local_irq_save(flags); - DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line)); - if (info->line == 0) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) == - IO_STATE(R_GEN_CONFIG, dma6, serial0)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused); - } - } else if (info->line == 1) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma8)) == - IO_STATE(R_GEN_CONFIG, dma8, serial1)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb); - } - } else if (info->line == 2) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma2)) == - IO_STATE(R_GEN_CONFIG, dma2, serial2)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0); - } - } else if (info->line == 3) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma4)) == - IO_STATE(R_GEN_CONFIG, dma4, serial3)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, par1); - } - } - *R_GEN_CONFIG = genconfig_shadow; - local_irq_restore(flags); -} - - -static void e100_enable_txdma_channel(struct e100_serial *info) -{ - unsigned long flags; - - local_irq_save(flags); - DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line)); - /* Enable output DMA channel for the serial port in question */ - if (info->line == 0) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, serial0); - } else if (info->line == 1) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, serial1); - } else if (info->line == 2) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, serial2); - } else if (info->line == 3) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3); - } - *R_GEN_CONFIG = genconfig_shadow; - local_irq_restore(flags); -} - -static void e100_disable_rxdma_channel(struct e100_serial *info) -{ - unsigned long flags; - - /* Disable input DMA channel for the serial port in question - * ( set to something other than serialX) - */ - local_irq_save(flags); - if (info->line == 0) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) == - IO_STATE(R_GEN_CONFIG, dma7, serial0)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, unused); - } - } else if (info->line == 1) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma9)) == - IO_STATE(R_GEN_CONFIG, dma9, serial1)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, usb); - } - } else if (info->line == 2) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma3)) == - IO_STATE(R_GEN_CONFIG, dma3, serial2)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, par0); - } - } else if (info->line == 3) { - if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma5)) == - IO_STATE(R_GEN_CONFIG, dma5, serial3)) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, par1); - } - } - *R_GEN_CONFIG = genconfig_shadow; - local_irq_restore(flags); -} - - -static void e100_enable_rxdma_channel(struct e100_serial *info) -{ - unsigned long flags; - - local_irq_save(flags); - /* Enable input DMA channel for the serial port in question */ - if (info->line == 0) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, serial0); - } else if (info->line == 1) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, serial1); - } else if (info->line == 2) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, serial2); - } else if (info->line == 3) { - genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5); - genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3); - } - *R_GEN_CONFIG = genconfig_shadow; - local_irq_restore(flags); -} - -#ifdef SERIAL_HANDLE_EARLY_ERRORS -/* in order to detect and fix errors on the first byte - we have to use the serial interrupts as well. */ - -static inline void -e100_disable_serial_data_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("ser_irq(%d): 0\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ disable data_irq %i\n", info->line)); - *R_IRQ_MASK1_CLR = (1U << (8+2*info->line)); -} - -static inline void -e100_enable_serial_data_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("ser_irq(%d): 1\n",info->line); - printk("**** %d = %d\n", - (8+2*info->line), - (1U << (8+2*info->line))); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ enable data_irq %i\n", info->line)); - *R_IRQ_MASK1_SET = (1U << (8+2*info->line)); -} -#endif - -static inline void -e100_disable_serial_tx_ready_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("ser_tx_irq(%d): 0\n",info->line); -#endif - DINTR1(DEBUG_LOG(info->line,"IRQ disable ready_irq %i\n", info->line)); - *R_IRQ_MASK1_CLR = (1U << (8+1+2*info->line)); -} - -static inline void -e100_enable_serial_tx_ready_irq(struct e100_serial *info) -{ -#ifdef SERIAL_DEBUG_INTR - printk("ser_tx_irq(%d): 1\n",info->line); - printk("**** %d = %d\n", - (8+1+2*info->line), - (1U << (8+1+2*info->line))); -#endif - DINTR2(DEBUG_LOG(info->line,"IRQ enable ready_irq %i\n", info->line)); - *R_IRQ_MASK1_SET = (1U << (8+1+2*info->line)); -} - -static inline void e100_enable_rx_irq(struct e100_serial *info) -{ - if (info->uses_dma_in) - e100_enable_rxdma_irq(info); - else - e100_enable_serial_data_irq(info); -} -static inline void e100_disable_rx_irq(struct e100_serial *info) -{ - if (info->uses_dma_in) - e100_disable_rxdma_irq(info); - else - e100_disable_serial_data_irq(info); -} - -#if defined(CONFIG_ETRAX_RS485) -/* Enable RS-485 mode on selected port. This is UGLY. */ -static int -e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r) -{ - struct e100_serial * info = (struct e100_serial *)tty->driver_data; - -#if defined(CONFIG_ETRAX_RS485_ON_PA) - *R_PORT_PA_DATA = port_pa_data_shadow |= (1 << rs485_pa_bit); -#endif -#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - rs485_port_g_bit, 1); -#endif -#if defined(CONFIG_ETRAX_RS485_LTC1387) - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 1); - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1); -#endif - - info->rs485 = *r; - - /* Maximum delay before RTS equal to 1000 */ - if (info->rs485.delay_rts_before_send >= 1000) - info->rs485.delay_rts_before_send = 1000; - -/* printk("rts: on send = %i, after = %i, enabled = %i", - info->rs485.rts_on_send, - info->rs485.rts_after_sent, - info->rs485.enabled - ); -*/ - return 0; -} - -static int -e100_write_rs485(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - struct e100_serial * info = (struct e100_serial *)tty->driver_data; - int old_value = (info->rs485.flags) & SER_RS485_ENABLED; - - /* rs485 is always implicitly enabled if we're using the ioctl() - * but it doesn't have to be set in the serial_rs485 - * (to be backward compatible with old apps) - * So we store, set and restore it. - */ - info->rs485.flags |= SER_RS485_ENABLED; - /* rs_write now deals with RS485 if enabled */ - count = rs_write(tty, buf, count); - if (!old_value) - info->rs485.flags &= ~(SER_RS485_ENABLED); - return count; -} - -#ifdef CONFIG_ETRAX_FAST_TIMER -/* Timer function to toggle RTS when using FAST_TIMER */ -static void rs485_toggle_rts_timer_function(unsigned long data) -{ - struct e100_serial *info = (struct e100_serial *)data; - - fast_timers_rs485[info->line].function = NULL; - e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND)); -#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) - e100_enable_rx(info); - e100_enable_rx_irq(info); -#endif -} -#endif -#endif /* CONFIG_ETRAX_RS485 */ - -/* - * ------------------------------------------------------------ - * rs_stop() and rs_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter using the XOFF registers, as necessary. - * ------------------------------------------------------------ - */ - -static void -rs_stop(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - if (info) { - unsigned long flags; - unsigned long xoff; - - local_irq_save(flags); - DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n", - CIRC_CNT(info->xmit.head, - info->xmit.tail,SERIAL_XMIT_SIZE))); - - xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, - STOP_CHAR(info->port.tty)); - xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop); - if (tty->termios->c_iflag & IXON ) { - xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); - } - - *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; - local_irq_restore(flags); - } -} - -static void -rs_start(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - if (info) { - unsigned long flags; - unsigned long xoff; - - local_irq_save(flags); - DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n", - CIRC_CNT(info->xmit.head, - info->xmit.tail,SERIAL_XMIT_SIZE))); - xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty)); - xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); - if (tty->termios->c_iflag & IXON ) { - xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); - } - - *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; - if (!info->uses_dma_out && - info->xmit.head != info->xmit.tail && info->xmit.buf) - e100_enable_serial_tx_ready_irq(info); - - local_irq_restore(flags); - } -} - -/* - * ---------------------------------------------------------------------- - * - * Here starts the interrupt handling routines. All of the following - * subroutines are declared as inline and are folded into - * rs_interrupt(). They were separated out for readability's sake. - * - * Note: rs_interrupt() is a "fast" interrupt, which means that it - * runs with interrupts turned off. People who may want to modify - * rs_interrupt() should try to keep the interrupt handler as fast as - * possible. After you are done making modifications, it is not a bad - * idea to do: - * - * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c - * - * and look at the resulting assemble code in serial.s. - * - * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 - * ----------------------------------------------------------------------- - */ - -/* - * This routine is used by the interrupt handler to schedule - * processing in the software interrupt portion of the driver. - */ -static void rs_sched_event(struct e100_serial *info, int event) -{ - if (info->event & (1 << event)) - return; - info->event |= 1 << event; - schedule_work(&info->work); -} - -/* The output DMA channel is free - use it to send as many chars as possible - * NOTES: - * We don't pay attention to info->x_char, which means if the TTY wants to - * use XON/XOFF it will set info->x_char but we won't send any X char! - * - * To implement this, we'd just start a DMA send of 1 byte pointing at a - * buffer containing the X char, and skip updating xmit. We'd also have to - * check if the last sent char was the X char when we enter this function - * the next time, to avoid updating xmit with the sent X value. - */ - -static void -transmit_chars_dma(struct e100_serial *info) -{ - unsigned int c, sentl; - struct etrax_dma_descr *descr; - -#ifdef CONFIG_SVINTO_SIM - /* This will output too little if tail is not 0 always since - * we don't reloop to send the other part. Anyway this SHOULD be a - * no-op - transmit_chars_dma would never really be called during sim - * since rs_write does not write into the xmit buffer then. - */ - if (info->xmit.tail) - printk("Error in serial.c:transmit_chars-dma(), tail!=0\n"); - if (info->xmit.head != info->xmit.tail) { - SIMCOUT(info->xmit.buf + info->xmit.tail, - CIRC_CNT(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE)); - info->xmit.head = info->xmit.tail; /* move back head */ - info->tr_running = 0; - } - return; -#endif - /* acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ - *info->oclrintradr = - IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | - IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); - -#ifdef SERIAL_DEBUG_INTR - if (info->line == SERIAL_DEBUG_LINE) - printk("tc\n"); -#endif - if (!info->tr_running) { - /* weirdo... we shouldn't get here! */ - printk(KERN_WARNING "Achtung: transmit_chars_dma with !tr_running\n"); - return; - } - - descr = &info->tr_descr; - - /* first get the amount of bytes sent during the last DMA transfer, - and update xmit accordingly */ - - /* if the stop bit was not set, all data has been sent */ - if (!(descr->status & d_stop)) { - sentl = descr->sw_len; - } else - /* otherwise we find the amount of data sent here */ - sentl = descr->hw_len; - - DFLOW(DEBUG_LOG(info->line, "TX %i done\n", sentl)); - - /* update stats */ - info->icount.tx += sentl; - - /* update xmit buffer */ - info->xmit.tail = (info->xmit.tail + sentl) & (SERIAL_XMIT_SIZE - 1); - - /* if there is only a few chars left in the buf, wake up the blocked - write if any */ - if (CIRC_CNT(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE) < WAKEUP_CHARS) - rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); - - /* find out the largest amount of consecutive bytes we want to send now */ - - c = CIRC_CNT_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); - - /* Don't send all in one DMA transfer - divide it so we wake up - * application before all is sent - */ - - if (c >= 4*WAKEUP_CHARS) - c = c/2; - - if (c <= 0) { - /* our job here is done, don't schedule any new DMA transfer */ - info->tr_running = 0; - -#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER) - if (info->rs485.flags & SER_RS485_ENABLED) { - /* Set a short timer to toggle RTS */ - start_one_shot_timer(&fast_timers_rs485[info->line], - rs485_toggle_rts_timer_function, - (unsigned long)info, - info->char_time_usec*2, - "RS-485"); - } -#endif /* RS485 */ - return; - } - - /* ok we can schedule a dma send of c chars starting at info->xmit.tail */ - /* set up the descriptor correctly for output */ - DFLOW(DEBUG_LOG(info->line, "TX %i\n", c)); - descr->ctrl = d_int | d_eol | d_wait; /* Wait needed for tty_wait_until_sent() */ - descr->sw_len = c; - descr->buf = virt_to_phys(info->xmit.buf + info->xmit.tail); - descr->status = 0; - - *info->ofirstadr = virt_to_phys(descr); /* write to R_DMAx_FIRST */ - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start); - - /* DMA is now running (hopefully) */ -} /* transmit_chars_dma */ - -static void -start_transmit(struct e100_serial *info) -{ -#if 0 - if (info->line == SERIAL_DEBUG_LINE) - printk("x\n"); -#endif - - info->tr_descr.sw_len = 0; - info->tr_descr.hw_len = 0; - info->tr_descr.status = 0; - info->tr_running = 1; - if (info->uses_dma_out) - transmit_chars_dma(info); - else - e100_enable_serial_tx_ready_irq(info); -} /* start_transmit */ - -#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER -static int serial_fast_timer_started = 0; -static int serial_fast_timer_expired = 0; -static void flush_timeout_function(unsigned long data); -#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\ - unsigned long timer_flags; \ - local_irq_save(timer_flags); \ - if (fast_timers[info->line].function == NULL) { \ - serial_fast_timer_started++; \ - TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \ - TIMERD(DEBUG_LOG(info->line, "num started: %i\n", serial_fast_timer_started)); \ - start_one_shot_timer(&fast_timers[info->line], \ - flush_timeout_function, \ - (unsigned long)info, \ - (usec), \ - string); \ - } \ - else { \ - TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \ - } \ - local_irq_restore(timer_flags); \ -} -#define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec) - -#else -#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) -#define START_FLUSH_FAST_TIMER(info, string) -#endif - -static struct etrax_recv_buffer * -alloc_recv_buffer(unsigned int size) -{ - struct etrax_recv_buffer *buffer; - - if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC))) - return NULL; - - buffer->next = NULL; - buffer->length = 0; - buffer->error = TTY_NORMAL; - - return buffer; -} - -static void -append_recv_buffer(struct e100_serial *info, struct etrax_recv_buffer *buffer) -{ - unsigned long flags; - - local_irq_save(flags); - - if (!info->first_recv_buffer) - info->first_recv_buffer = buffer; - else - info->last_recv_buffer->next = buffer; - - info->last_recv_buffer = buffer; - - info->recv_cnt += buffer->length; - if (info->recv_cnt > info->max_recv_cnt) - info->max_recv_cnt = info->recv_cnt; - - local_irq_restore(flags); -} - -static int -add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char flag) -{ - struct etrax_recv_buffer *buffer; - if (info->uses_dma_in) { - if (!(buffer = alloc_recv_buffer(4))) - return 0; - - buffer->length = 1; - buffer->error = flag; - buffer->buffer[0] = data; - - append_recv_buffer(info, buffer); - - info->icount.rx++; - } else { - struct tty_struct *tty = info->port.tty; - tty_insert_flip_char(tty, data, flag); - info->icount.rx++; - } - - return 1; -} - -static unsigned int handle_descr_data(struct e100_serial *info, - struct etrax_dma_descr *descr, - unsigned int recvl) -{ - struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer; - - if (info->recv_cnt + recvl > 65536) { - printk(KERN_CRIT - "%s: Too much pending incoming serial data! Dropping %u bytes.\n", __func__, recvl); - return 0; - } - - buffer->length = recvl; - - if (info->errorcode == ERRCODE_SET_BREAK) - buffer->error = TTY_BREAK; - info->errorcode = 0; - - append_recv_buffer(info, buffer); - - if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE))) - panic("%s: Failed to allocate memory for receive buffer!\n", __func__); - - descr->buf = virt_to_phys(buffer->buffer); - - return recvl; -} - -static unsigned int handle_all_descr_data(struct e100_serial *info) -{ - struct etrax_dma_descr *descr; - unsigned int recvl; - unsigned int ret = 0; - - while (1) - { - descr = &info->rec_descr[info->cur_rec_descr]; - - if (descr == phys_to_virt(*info->idescradr)) - break; - - if (++info->cur_rec_descr == SERIAL_RECV_DESCRIPTORS) - info->cur_rec_descr = 0; - - /* find out how many bytes were read */ - - /* if the eop bit was not set, all data has been received */ - if (!(descr->status & d_eop)) { - recvl = descr->sw_len; - } else { - /* otherwise we find the amount of data received here */ - recvl = descr->hw_len; - } - - /* Reset the status information */ - descr->status = 0; - - DFLOW( DEBUG_LOG(info->line, "RX %lu\n", recvl); - if (info->port.tty->stopped) { - unsigned char *buf = phys_to_virt(descr->buf); - DEBUG_LOG(info->line, "rx 0x%02X\n", buf[0]); - DEBUG_LOG(info->line, "rx 0x%02X\n", buf[1]); - DEBUG_LOG(info->line, "rx 0x%02X\n", buf[2]); - } - ); - - /* update stats */ - info->icount.rx += recvl; - - ret += handle_descr_data(info, descr, recvl); - } - - return ret; -} - -static void receive_chars_dma(struct e100_serial *info) -{ - struct tty_struct *tty; - unsigned char rstat; - -#ifdef CONFIG_SVINTO_SIM - /* No receive in the simulator. Will probably be when the rest of - * the serial interface works, and this piece will just be removed. - */ - return; -#endif - - /* Acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ - *info->iclrintradr = - IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | - IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); - - tty = info->port.tty; - if (!tty) /* Something wrong... */ - return; - -#ifdef SERIAL_HANDLE_EARLY_ERRORS - if (info->uses_dma_in) - e100_enable_serial_data_irq(info); -#endif - - if (info->errorcode == ERRCODE_INSERT_BREAK) - add_char_and_flag(info, '\0', TTY_BREAK); - - handle_all_descr_data(info); - - /* Read the status register to detect errors */ - rstat = info->ioport[REG_STATUS]; - if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { - DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat)); - } - - if (rstat & SER_ERROR_MASK) { - /* If we got an error, we must reset it by reading the - * data_in field - */ - unsigned char data = info->ioport[REG_DATA]; - - PROCSTAT(ser_stat[info->line].errors_cnt++); - DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n", - ((rstat & SER_ERROR_MASK) << 8) | data); - - if (rstat & SER_PAR_ERR_MASK) - add_char_and_flag(info, data, TTY_PARITY); - else if (rstat & SER_OVERRUN_MASK) - add_char_and_flag(info, data, TTY_OVERRUN); - else if (rstat & SER_FRAMING_ERR_MASK) - add_char_and_flag(info, data, TTY_FRAME); - } - - START_FLUSH_FAST_TIMER(info, "receive_chars"); - - /* Restart the receiving DMA */ - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); -} - -static int start_recv_dma(struct e100_serial *info) -{ - struct etrax_dma_descr *descr = info->rec_descr; - struct etrax_recv_buffer *buffer; - int i; - - /* Set up the receiving descriptors */ - for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) { - if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE))) - panic("%s: Failed to allocate memory for receive buffer!\n", __func__); - - descr[i].ctrl = d_int; - descr[i].buf = virt_to_phys(buffer->buffer); - descr[i].sw_len = SERIAL_DESCR_BUF_SIZE; - descr[i].hw_len = 0; - descr[i].status = 0; - descr[i].next = virt_to_phys(&descr[i+1]); - } - - /* Link the last descriptor to the first */ - descr[i-1].next = virt_to_phys(&descr[0]); - - /* Start with the first descriptor in the list */ - info->cur_rec_descr = 0; - - /* Start the DMA */ - *info->ifirstadr = virt_to_phys(&descr[info->cur_rec_descr]); - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start); - - /* Input DMA should be running now */ - return 1; -} - -static void -start_receive(struct e100_serial *info) -{ -#ifdef CONFIG_SVINTO_SIM - /* No receive in the simulator. Will probably be when the rest of - * the serial interface works, and this piece will just be removed. - */ - return; -#endif - if (info->uses_dma_in) { - /* reset the input dma channel to be sure it works */ - - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); - while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) == - IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); - - start_recv_dma(info); - } -} - - -/* the bits in the MASK2 register are laid out like this: - DMAI_EOP DMAI_DESCR DMAO_EOP DMAO_DESCR - where I is the input channel and O is the output channel for the port. - info->irq is the bit number for the DMAO_DESCR so to check the others we - shift info->irq to the left. -*/ - -/* dma output channel interrupt handler - this interrupt is called from DMA2(ser2), DMA4(ser3), DMA6(ser0) or - DMA8(ser1) when they have finished a descriptor with the intr flag set. -*/ - -static irqreturn_t -tr_interrupt(int irq, void *dev_id) -{ - struct e100_serial *info; - unsigned long ireg; - int i; - int handled = 0; - -#ifdef CONFIG_SVINTO_SIM - /* No receive in the simulator. Will probably be when the rest of - * the serial interface works, and this piece will just be removed. - */ - { - const char *s = "What? tr_interrupt in simulator??\n"; - SIMCOUT(s,strlen(s)); - } - return IRQ_HANDLED; -#endif - - /* find out the line that caused this irq and get it from rs_table */ - - ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ - - for (i = 0; i < NR_PORTS; i++) { - info = rs_table + i; - if (!info->enabled || !info->uses_dma_out) - continue; - /* check for dma_descr (don't need to check for dma_eop in output dma for serial */ - if (ireg & info->irq) { - handled = 1; - /* we can send a new dma bunch. make it so. */ - DINTR2(DEBUG_LOG(info->line, "tr_interrupt %i\n", i)); - /* Read jiffies_usec first, - * we want this time to be as late as possible - */ - PROCSTAT(ser_stat[info->line].tx_dma_ints++); - info->last_tx_active_usec = GET_JIFFIES_USEC(); - info->last_tx_active = jiffies; - transmit_chars_dma(info); - } - - /* FIXME: here we should really check for a change in the - status lines and if so call status_handle(info) */ - } - return IRQ_RETVAL(handled); -} /* tr_interrupt */ - -/* dma input channel interrupt handler */ - -static irqreturn_t -rec_interrupt(int irq, void *dev_id) -{ - struct e100_serial *info; - unsigned long ireg; - int i; - int handled = 0; - -#ifdef CONFIG_SVINTO_SIM - /* No receive in the simulator. Will probably be when the rest of - * the serial interface works, and this piece will just be removed. - */ - { - const char *s = "What? rec_interrupt in simulator??\n"; - SIMCOUT(s,strlen(s)); - } - return IRQ_HANDLED; -#endif - - /* find out the line that caused this irq and get it from rs_table */ - - ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ - - for (i = 0; i < NR_PORTS; i++) { - info = rs_table + i; - if (!info->enabled || !info->uses_dma_in) - continue; - /* check for both dma_eop and dma_descr for the input dma channel */ - if (ireg & ((info->irq << 2) | (info->irq << 3))) { - handled = 1; - /* we have received something */ - receive_chars_dma(info); - } - - /* FIXME: here we should really check for a change in the - status lines and if so call status_handle(info) */ - } - return IRQ_RETVAL(handled); -} /* rec_interrupt */ - -static int force_eop_if_needed(struct e100_serial *info) -{ - /* We check data_avail bit to determine if data has - * arrived since last time - */ - unsigned char rstat = info->ioport[REG_STATUS]; - - /* error or datavail? */ - if (rstat & SER_ERROR_MASK) { - /* Some error has occurred. If there has been valid data, an - * EOP interrupt will be made automatically. If no data, the - * normal ser_interrupt should be enabled and handle it. - * So do nothing! - */ - DEBUG_LOG(info->line, "timeout err: rstat 0x%03X\n", - rstat | (info->line << 8)); - return 0; - } - - if (rstat & SER_DATA_AVAIL_MASK) { - /* Ok data, no error, count it */ - TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n", - rstat | (info->line << 8))); - /* Read data to clear status flags */ - (void)info->ioport[REG_DATA]; - - info->forced_eop = 0; - START_FLUSH_FAST_TIMER(info, "magic"); - return 0; - } - - /* hit the timeout, force an EOP for the input - * dma channel if we haven't already - */ - if (!info->forced_eop) { - info->forced_eop = 1; - PROCSTAT(ser_stat[info->line].timeout_flush_cnt++); - TIMERD(DEBUG_LOG(info->line, "timeout EOP %i\n", info->line)); - FORCE_EOP(info); - } - - return 1; -} - -static void flush_to_flip_buffer(struct e100_serial *info) -{ - struct tty_struct *tty; - struct etrax_recv_buffer *buffer; - unsigned long flags; - - local_irq_save(flags); - tty = info->port.tty; - - if (!tty) { - local_irq_restore(flags); - return; - } - - while ((buffer = info->first_recv_buffer) != NULL) { - unsigned int count = buffer->length; - - tty_insert_flip_string(tty, buffer->buffer, count); - info->recv_cnt -= count; - - if (count == buffer->length) { - info->first_recv_buffer = buffer->next; - kfree(buffer); - } else { - buffer->length -= count; - memmove(buffer->buffer, buffer->buffer + count, buffer->length); - buffer->error = TTY_NORMAL; - } - } - - if (!info->first_recv_buffer) - info->last_recv_buffer = NULL; - - local_irq_restore(flags); - - /* This includes a check for low-latency */ - tty_flip_buffer_push(tty); -} - -static void check_flush_timeout(struct e100_serial *info) -{ - /* Flip what we've got (if we can) */ - flush_to_flip_buffer(info); - - /* We might need to flip later, but not to fast - * since the system is busy processing input... */ - if (info->first_recv_buffer) - START_FLUSH_FAST_TIMER_TIME(info, "flip", 2000); - - /* Force eop last, since data might have come while we're processing - * and if we started the slow timer above, we won't start a fast - * below. - */ - force_eop_if_needed(info); -} - -#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER -static void flush_timeout_function(unsigned long data) -{ - struct e100_serial *info = (struct e100_serial *)data; - - fast_timers[info->line].function = NULL; - serial_fast_timer_expired++; - TIMERD(DEBUG_LOG(info->line, "flush_timout %i ", info->line)); - TIMERD(DEBUG_LOG(info->line, "num expired: %i\n", serial_fast_timer_expired)); - check_flush_timeout(info); -} - -#else - -/* dma fifo/buffer timeout handler - forces an end-of-packet for the dma input channel if no chars - have been received for CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS/100 s. -*/ - -static struct timer_list flush_timer; - -static void -timed_flush_handler(unsigned long ptr) -{ - struct e100_serial *info; - int i; - -#ifdef CONFIG_SVINTO_SIM - return; -#endif - - for (i = 0; i < NR_PORTS; i++) { - info = rs_table + i; - if (info->uses_dma_in) - check_flush_timeout(info); - } - - /* restart flush timer */ - mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS); -} -#endif - -#ifdef SERIAL_HANDLE_EARLY_ERRORS - -/* If there is an error (ie break) when the DMA is running and - * there are no bytes in the fifo the DMA is stopped and we get no - * eop interrupt. Thus we have to monitor the first bytes on a DMA - * transfer, and if it is without error we can turn the serial - * interrupts off. - */ - -/* -BREAK handling on ETRAX 100: -ETRAX will generate interrupt although there is no stop bit between the -characters. - -Depending on how long the break sequence is, the end of the breaksequence -will look differently: -| indicates start/end of a character. - -B= Break character (0x00) with framing error. -E= Error byte with parity error received after B characters. -F= "Faked" valid byte received immediately after B characters. -V= Valid byte - -1. - B BL ___________________________ V -.._|__________|__________| |valid data | - -Multiple frame errors with data == 0x00 (B), -the timing matches up "perfectly" so no extra ending char is detected. -The RXD pin is 1 in the last interrupt, in that case -we set info->errorcode = ERRCODE_INSERT_BREAK, but we can't really -know if another byte will come and this really is case 2. below -(e.g F=0xFF or 0xFE) -If RXD pin is 0 we can expect another character (see 2. below). - - -2. - - B B E or F__________________..__ V -.._|__________|__________|______ | |valid data - "valid" or - parity error - -Multiple frame errors with data == 0x00 (B), -but the part of the break trigs is interpreted as a start bit (and possibly -some 0 bits followed by a number of 1 bits and a stop bit). -Depending on parity settings etc. this last character can be either -a fake "valid" char (F) or have a parity error (E). - -If the character is valid it will be put in the buffer, -we set info->errorcode = ERRCODE_SET_BREAK so the receive interrupt -will set the flags so the tty will handle it, -if it's an error byte it will not be put in the buffer -and we set info->errorcode = ERRCODE_INSERT_BREAK. - -To distinguish a V byte in 1. from an F byte in 2. we keep a timestamp -of the last faulty char (B) and compares it with the current time: -If the time elapsed time is less then 2*char_time_usec we will assume -it's a faked F char and not a Valid char and set -info->errorcode = ERRCODE_SET_BREAK. - -Flaws in the above solution: -~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -We use the timer to distinguish a F character from a V character, -if a V character is to close after the break we might make the wrong decision. - -TODO: The break will be delayed until an F or V character is received. - -*/ - -static -struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info) -{ - unsigned long data_read; - struct tty_struct *tty = info->port.tty; - - if (!tty) { - printk("!NO TTY!\n"); - return info; - } - - /* Read data and status at the same time */ - data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); -more_data: - if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) { - DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); - } - DINTR2(DEBUG_LOG(info->line, "ser_rx %c\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read))); - - if (data_read & ( IO_MASK(R_SERIAL0_READ, framing_err) | - IO_MASK(R_SERIAL0_READ, par_err) | - IO_MASK(R_SERIAL0_READ, overrun) )) { - /* An error */ - info->last_rx_active_usec = GET_JIFFIES_USEC(); - info->last_rx_active = jiffies; - DINTR1(DEBUG_LOG(info->line, "ser_rx err stat_data %04X\n", data_read)); - DLOG_INT_TRIG( - if (!log_int_trig1_pos) { - log_int_trig1_pos = log_int_pos; - log_int(rdpc(), 0, 0); - } - ); - - - if ( ((data_read & IO_MASK(R_SERIAL0_READ, data_in)) == 0) && - (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) ) { - /* Most likely a break, but we get interrupts over and - * over again. - */ - - if (!info->break_detected_cnt) { - DEBUG_LOG(info->line, "#BRK start\n", 0); - } - if (data_read & IO_MASK(R_SERIAL0_READ, rxd)) { - /* The RX pin is high now, so the break - * must be over, but.... - * we can't really know if we will get another - * last byte ending the break or not. - * And we don't know if the byte (if any) will - * have an error or look valid. - */ - DEBUG_LOG(info->line, "# BL BRK\n", 0); - info->errorcode = ERRCODE_INSERT_BREAK; - } - info->break_detected_cnt++; - } else { - /* The error does not look like a break, but could be - * the end of one - */ - if (info->break_detected_cnt) { - DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); - info->errorcode = ERRCODE_INSERT_BREAK; - } else { - unsigned char data = IO_EXTRACT(R_SERIAL0_READ, - data_in, data_read); - char flag = TTY_NORMAL; - if (info->errorcode == ERRCODE_INSERT_BREAK) { - struct tty_struct *tty = info->port.tty; - tty_insert_flip_char(tty, 0, flag); - info->icount.rx++; - } - - if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) { - info->icount.parity++; - flag = TTY_PARITY; - } else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) { - info->icount.overrun++; - flag = TTY_OVERRUN; - } else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) { - info->icount.frame++; - flag = TTY_FRAME; - } - tty_insert_flip_char(tty, data, flag); - info->errorcode = 0; - } - info->break_detected_cnt = 0; - } - } else if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { - /* No error */ - DLOG_INT_TRIG( - if (!log_int_trig1_pos) { - if (log_int_pos >= log_int_size) { - log_int_pos = 0; - } - log_int_trig0_pos = log_int_pos; - log_int(rdpc(), 0, 0); - } - ); - tty_insert_flip_char(tty, - IO_EXTRACT(R_SERIAL0_READ, data_in, data_read), - TTY_NORMAL); - } else { - DEBUG_LOG(info->line, "ser_rx int but no data_avail %08lX\n", data_read); - } - - - info->icount.rx++; - data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); - if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { - DEBUG_LOG(info->line, "ser_rx %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read)); - goto more_data; - } - - tty_flip_buffer_push(info->port.tty); - return info; -} - -static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) -{ - unsigned char rstat; - -#ifdef SERIAL_DEBUG_INTR - printk("Interrupt from serport %d\n", i); -#endif -/* DEBUG_LOG(info->line, "ser_interrupt stat %03X\n", rstat | (i << 8)); */ - if (!info->uses_dma_in) { - return handle_ser_rx_interrupt_no_dma(info); - } - /* DMA is used */ - rstat = info->ioport[REG_STATUS]; - if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { - DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); - } - - if (rstat & SER_ERROR_MASK) { - unsigned char data; - - info->last_rx_active_usec = GET_JIFFIES_USEC(); - info->last_rx_active = jiffies; - /* If we got an error, we must reset it by reading the - * data_in field - */ - data = info->ioport[REG_DATA]; - DINTR1(DEBUG_LOG(info->line, "ser_rx! %c\n", data)); - DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat)); - if (!data && (rstat & SER_FRAMING_ERR_MASK)) { - /* Most likely a break, but we get interrupts over and - * over again. - */ - - if (!info->break_detected_cnt) { - DEBUG_LOG(info->line, "#BRK start\n", 0); - } - if (rstat & SER_RXD_MASK) { - /* The RX pin is high now, so the break - * must be over, but.... - * we can't really know if we will get another - * last byte ending the break or not. - * And we don't know if the byte (if any) will - * have an error or look valid. - */ - DEBUG_LOG(info->line, "# BL BRK\n", 0); - info->errorcode = ERRCODE_INSERT_BREAK; - } - info->break_detected_cnt++; - } else { - /* The error does not look like a break, but could be - * the end of one - */ - if (info->break_detected_cnt) { - DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); - info->errorcode = ERRCODE_INSERT_BREAK; - } else { - if (info->errorcode == ERRCODE_INSERT_BREAK) { - info->icount.brk++; - add_char_and_flag(info, '\0', TTY_BREAK); - } - - if (rstat & SER_PAR_ERR_MASK) { - info->icount.parity++; - add_char_and_flag(info, data, TTY_PARITY); - } else if (rstat & SER_OVERRUN_MASK) { - info->icount.overrun++; - add_char_and_flag(info, data, TTY_OVERRUN); - } else if (rstat & SER_FRAMING_ERR_MASK) { - info->icount.frame++; - add_char_and_flag(info, data, TTY_FRAME); - } - - info->errorcode = 0; - } - info->break_detected_cnt = 0; - DEBUG_LOG(info->line, "#iERR s d %04X\n", - ((rstat & SER_ERROR_MASK) << 8) | data); - } - PROCSTAT(ser_stat[info->line].early_errors_cnt++); - } else { /* It was a valid byte, now let the DMA do the rest */ - unsigned long curr_time_u = GET_JIFFIES_USEC(); - unsigned long curr_time = jiffies; - - if (info->break_detected_cnt) { - /* Detect if this character is a new valid char or the - * last char in a break sequence: If LSBits are 0 and - * MSBits are high AND the time is close to the - * previous interrupt we should discard it. - */ - long elapsed_usec = - (curr_time - info->last_rx_active) * (1000000/HZ) + - curr_time_u - info->last_rx_active_usec; - if (elapsed_usec < 2*info->char_time_usec) { - DEBUG_LOG(info->line, "FBRK %i\n", info->line); - /* Report as BREAK (error) and let - * receive_chars_dma() handle it - */ - info->errorcode = ERRCODE_SET_BREAK; - } else { - DEBUG_LOG(info->line, "Not end of BRK (V)%i\n", info->line); - } - DEBUG_LOG(info->line, "num brk %i\n", info->break_detected_cnt); - } - -#ifdef SERIAL_DEBUG_INTR - printk("** OK, disabling ser_interrupts\n"); -#endif - e100_disable_serial_data_irq(info); - DINTR2(DEBUG_LOG(info->line, "ser_rx OK %d\n", info->line)); - info->break_detected_cnt = 0; - - PROCSTAT(ser_stat[info->line].ser_ints_ok_cnt++); - } - /* Restarting the DMA never hurts */ - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); - START_FLUSH_FAST_TIMER(info, "ser_int"); - return info; -} /* handle_ser_rx_interrupt */ - -static void handle_ser_tx_interrupt(struct e100_serial *info) -{ - unsigned long flags; - - if (info->x_char) { - unsigned char rstat; - DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char)); - local_irq_save(flags); - rstat = info->ioport[REG_STATUS]; - DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); - - info->ioport[REG_TR_DATA] = info->x_char; - info->icount.tx++; - info->x_char = 0; - /* We must enable since it is disabled in ser_interrupt */ - e100_enable_serial_tx_ready_irq(info); - local_irq_restore(flags); - return; - } - if (info->uses_dma_out) { - unsigned char rstat; - int i; - /* We only use normal tx interrupt when sending x_char */ - DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0)); - local_irq_save(flags); - rstat = info->ioport[REG_STATUS]; - DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); - e100_disable_serial_tx_ready_irq(info); - if (info->port.tty->stopped) - rs_stop(info->port.tty); - /* Enable the DMA channel and tell it to continue */ - e100_enable_txdma_channel(info); - /* Wait 12 cycles before doing the DMA command */ - for(i = 6; i > 0; i--) - nop(); - - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue); - local_irq_restore(flags); - return; - } - /* Normal char-by-char interrupt */ - if (info->xmit.head == info->xmit.tail - || info->port.tty->stopped - || info->port.tty->hw_stopped) { - DFLOW(DEBUG_LOG(info->line, "tx_int: stopped %i\n", - info->port.tty->stopped)); - e100_disable_serial_tx_ready_irq(info); - info->tr_running = 0; - return; - } - DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail])); - /* Send a byte, rs485 timing is critical so turn of ints */ - local_irq_save(flags); - info->ioport[REG_TR_DATA] = info->xmit.buf[info->xmit.tail]; - info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1); - info->icount.tx++; - if (info->xmit.head == info->xmit.tail) { -#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER) - if (info->rs485.flags & SER_RS485_ENABLED) { - /* Set a short timer to toggle RTS */ - start_one_shot_timer(&fast_timers_rs485[info->line], - rs485_toggle_rts_timer_function, - (unsigned long)info, - info->char_time_usec*2, - "RS-485"); - } -#endif /* RS485 */ - info->last_tx_active_usec = GET_JIFFIES_USEC(); - info->last_tx_active = jiffies; - e100_disable_serial_tx_ready_irq(info); - info->tr_running = 0; - DFLOW(DEBUG_LOG(info->line, "tx_int: stop2\n", 0)); - } else { - /* We must enable since it is disabled in ser_interrupt */ - e100_enable_serial_tx_ready_irq(info); - } - local_irq_restore(flags); - - if (CIRC_CNT(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE) < WAKEUP_CHARS) - rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); - -} /* handle_ser_tx_interrupt */ - -/* result of time measurements: - * RX duration 54-60 us when doing something, otherwise 6-9 us - * ser_int duration: just sending: 8-15 us normally, up to 73 us - */ -static irqreturn_t -ser_interrupt(int irq, void *dev_id) -{ - static volatile int tx_started = 0; - struct e100_serial *info; - int i; - unsigned long flags; - unsigned long irq_mask1_rd; - unsigned long data_mask = (1 << (8+2*0)); /* ser0 data_avail */ - int handled = 0; - static volatile unsigned long reentered_ready_mask = 0; - - local_irq_save(flags); - irq_mask1_rd = *R_IRQ_MASK1_RD; - /* First handle all rx interrupts with ints disabled */ - info = rs_table; - irq_mask1_rd &= e100_ser_int_mask; - for (i = 0; i < NR_PORTS; i++) { - /* Which line caused the data irq? */ - if (irq_mask1_rd & data_mask) { - handled = 1; - handle_ser_rx_interrupt(info); - } - info += 1; - data_mask <<= 2; - } - /* Handle tx interrupts with interrupts enabled so we - * can take care of new data interrupts while transmitting - * We protect the tx part with the tx_started flag. - * We disable the tr_ready interrupts we are about to handle and - * unblock the serial interrupt so new serial interrupts may come. - * - * If we get a new interrupt: - * - it migth be due to synchronous serial ports. - * - serial irq will be blocked by general irq handler. - * - async data will be handled above (sync will be ignored). - * - tx_started flag will prevent us from trying to send again and - * we will exit fast - no need to unblock serial irq. - * - Next (sync) serial interrupt handler will be runned with - * disabled interrupt due to restore_flags() at end of function, - * so sync handler will not be preempted or reentered. - */ - if (!tx_started) { - unsigned long ready_mask; - unsigned long - tx_started = 1; - /* Only the tr_ready interrupts left */ - irq_mask1_rd &= (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser1_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser2_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser3_ready)); - while (irq_mask1_rd) { - /* Disable those we are about to handle */ - *R_IRQ_MASK1_CLR = irq_mask1_rd; - /* Unblock the serial interrupt */ - *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set); - - local_irq_enable(); - ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */ - info = rs_table; - for (i = 0; i < NR_PORTS; i++) { - /* Which line caused the ready irq? */ - if (irq_mask1_rd & ready_mask) { - handled = 1; - handle_ser_tx_interrupt(info); - } - info += 1; - ready_mask <<= 2; - } - /* handle_ser_tx_interrupt enables tr_ready interrupts */ - local_irq_disable(); - /* Handle reentered TX interrupt */ - irq_mask1_rd = reentered_ready_mask; - } - local_irq_disable(); - tx_started = 0; - } else { - unsigned long ready_mask; - ready_mask = irq_mask1_rd & (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser1_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser2_ready) | - IO_MASK(R_IRQ_MASK1_RD, ser3_ready)); - if (ready_mask) { - reentered_ready_mask |= ready_mask; - /* Disable those we are about to handle */ - *R_IRQ_MASK1_CLR = ready_mask; - DFLOW(DEBUG_LOG(SERIAL_DEBUG_LINE, "ser_int reentered with TX %X\n", ready_mask)); - } - } - - local_irq_restore(flags); - return IRQ_RETVAL(handled); -} /* ser_interrupt */ -#endif - -/* - * ------------------------------------------------------------------- - * Here ends the serial interrupt routines. - * ------------------------------------------------------------------- - */ - -/* - * This routine is used to handle the "bottom half" processing for the - * serial driver, known also the "software interrupt" processing. - * This processing is done at the kernel interrupt level, after the - * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This - * is where time-consuming activities which can not be done in the - * interrupt driver proper are done; the interrupt driver schedules - * them using rs_sched_event(), and they get done here. - */ -static void -do_softint(struct work_struct *work) -{ - struct e100_serial *info; - struct tty_struct *tty; - - info = container_of(work, struct e100_serial, work); - - tty = info->port.tty; - if (!tty) - return; - - if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) - tty_wakeup(tty); -} - -static int -startup(struct e100_serial * info) -{ - unsigned long flags; - unsigned long xmit_page; - int i; - - xmit_page = get_zeroed_page(GFP_KERNEL); - if (!xmit_page) - return -ENOMEM; - - local_irq_save(flags); - - /* if it was already initialized, skip this */ - - if (info->flags & ASYNC_INITIALIZED) { - local_irq_restore(flags); - free_page(xmit_page); - return 0; - } - - if (info->xmit.buf) - free_page(xmit_page); - else - info->xmit.buf = (unsigned char *) xmit_page; - -#ifdef SERIAL_DEBUG_OPEN - printk("starting up ttyS%d (xmit_buf 0x%p)...\n", info->line, info->xmit.buf); -#endif - -#ifdef CONFIG_SVINTO_SIM - /* Bits and pieces collected from below. Better to have them - in one ifdef:ed clause than to mix in a lot of ifdefs, - right? */ - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->xmit.head = info->xmit.tail = 0; - info->first_recv_buffer = info->last_recv_buffer = NULL; - info->recv_cnt = info->max_recv_cnt = 0; - - for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) - info->rec_descr[i].buf = NULL; - - /* No real action in the simulator, but may set info important - to ioctl. */ - change_speed(info); -#else - - /* - * Clear the FIFO buffers and disable them - * (they will be reenabled in change_speed()) - */ - - /* - * Reset the DMA channels and make sure their interrupts are cleared - */ - - if (info->dma_in_enabled) { - info->uses_dma_in = 1; - e100_enable_rxdma_channel(info); - - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); - - /* Wait until reset cycle is complete */ - while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) == - IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); - - /* Make sure the irqs are cleared */ - *info->iclrintradr = - IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | - IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); - } else { - e100_disable_rxdma_channel(info); - } - - if (info->dma_out_enabled) { - info->uses_dma_out = 1; - e100_enable_txdma_channel(info); - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); - - while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) == - IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); - - /* Make sure the irqs are cleared */ - *info->oclrintradr = - IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | - IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); - } else { - e100_disable_txdma_channel(info); - } - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->xmit.head = info->xmit.tail = 0; - info->first_recv_buffer = info->last_recv_buffer = NULL; - info->recv_cnt = info->max_recv_cnt = 0; - - for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) - info->rec_descr[i].buf = 0; - - /* - * and set the speed and other flags of the serial port - * this will start the rx/tx as well - */ -#ifdef SERIAL_HANDLE_EARLY_ERRORS - e100_enable_serial_data_irq(info); -#endif - change_speed(info); - - /* dummy read to reset any serial errors */ - - (void)info->ioport[REG_DATA]; - - /* enable the interrupts */ - if (info->uses_dma_out) - e100_enable_txdma_irq(info); - - e100_enable_rx_irq(info); - - info->tr_running = 0; /* to be sure we don't lock up the transmitter */ - - /* setup the dma input descriptor and start dma */ - - start_receive(info); - - /* for safety, make sure the descriptors last result is 0 bytes written */ - - info->tr_descr.sw_len = 0; - info->tr_descr.hw_len = 0; - info->tr_descr.status = 0; - - /* enable RTS/DTR last */ - - e100_rts(info, 1); - e100_dtr(info, 1); - -#endif /* CONFIG_SVINTO_SIM */ - - info->flags |= ASYNC_INITIALIZED; - - local_irq_restore(flags); - return 0; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void -shutdown(struct e100_serial * info) -{ - unsigned long flags; - struct etrax_dma_descr *descr = info->rec_descr; - struct etrax_recv_buffer *buffer; - int i; - -#ifndef CONFIG_SVINTO_SIM - /* shut down the transmitter and receiver */ - DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line)); - e100_disable_rx(info); - info->ioport[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40); - - /* disable interrupts, reset dma channels */ - if (info->uses_dma_in) { - e100_disable_rxdma_irq(info); - *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); - info->uses_dma_in = 0; - } else { - e100_disable_serial_data_irq(info); - } - - if (info->uses_dma_out) { - e100_disable_txdma_irq(info); - info->tr_running = 0; - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); - info->uses_dma_out = 0; - } else { - e100_disable_serial_tx_ready_irq(info); - info->tr_running = 0; - } - -#endif /* CONFIG_SVINTO_SIM */ - - if (!(info->flags & ASYNC_INITIALIZED)) - return; - -#ifdef SERIAL_DEBUG_OPEN - printk("Shutting down serial port %d (irq %d)....\n", info->line, - info->irq); -#endif - - local_irq_save(flags); - - if (info->xmit.buf) { - free_page((unsigned long)info->xmit.buf); - info->xmit.buf = NULL; - } - - for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) - if (descr[i].buf) { - buffer = phys_to_virt(descr[i].buf) - sizeof *buffer; - kfree(buffer); - descr[i].buf = 0; - } - - if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) { - /* hang up DTR and RTS if HUPCL is enabled */ - e100_dtr(info, 0); - e100_rts(info, 0); /* could check CRTSCTS before doing this */ - } - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->flags &= ~ASYNC_INITIALIZED; - local_irq_restore(flags); -} - - -/* change baud rate and other assorted parameters */ - -static void -change_speed(struct e100_serial *info) -{ - unsigned int cflag; - unsigned long xoff; - unsigned long flags; - /* first some safety checks */ - - if (!info->port.tty || !info->port.tty->termios) - return; - if (!info->ioport) - return; - - cflag = info->port.tty->termios->c_cflag; - - /* possibly, the tx/rx should be disabled first to do this safely */ - - /* change baud-rate and write it to the hardware */ - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) { - /* Special baudrate */ - u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */ - unsigned long alt_source = - IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) | - IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal); - /* R_ALT_SER_BAUDRATE selects the source */ - DBAUD(printk("Custom baudrate: baud_base/divisor %lu/%i\n", - (unsigned long)info->baud_base, info->custom_divisor)); - if (info->baud_base == SERIAL_PRESCALE_BASE) { - /* 0, 2-65535 (0=65536) */ - u16 divisor = info->custom_divisor; - /* R_SERIAL_PRESCALE (upper 16 bits of R_CLOCK_PRESCALE) */ - /* baudrate is 3.125MHz/custom_divisor */ - alt_source = - IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, prescale) | - IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, prescale); - alt_source = 0x11; - DBAUD(printk("Writing SERIAL_PRESCALE: divisor %i\n", divisor)); - *R_SERIAL_PRESCALE = divisor; - info->baud = SERIAL_PRESCALE_BASE/divisor; - } -#ifdef CONFIG_ETRAX_EXTERN_PB6CLK_ENABLED - else if ((info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8 && - info->custom_divisor == 1) || - (info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ && - info->custom_divisor == 8)) { - /* ext_clk selected */ - alt_source = - IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, extern) | - IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, extern); - DBAUD(printk("using external baudrate: %lu\n", CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8)); - info->baud = CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8; - } -#endif - else - { - /* Bad baudbase, we don't support using timer0 - * for baudrate. - */ - printk(KERN_WARNING "Bad baud_base/custom_divisor: %lu/%i\n", - (unsigned long)info->baud_base, info->custom_divisor); - } - r_alt_ser_baudrate_shadow &= ~mask; - r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8)); - *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow; - } else { - /* Normal baudrate */ - /* Make sure we use normal baudrate */ - u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */ - unsigned long alt_source = - IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) | - IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal); - r_alt_ser_baudrate_shadow &= ~mask; - r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8)); -#ifndef CONFIG_SVINTO_SIM - *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow; -#endif /* CONFIG_SVINTO_SIM */ - - info->baud = cflag_to_baud(cflag); -#ifndef CONFIG_SVINTO_SIM - info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag); -#endif /* CONFIG_SVINTO_SIM */ - } - -#ifndef CONFIG_SVINTO_SIM - /* start with default settings and then fill in changes */ - local_irq_save(flags); - /* 8 bit, no/even parity */ - info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) | - IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) | - IO_MASK(R_SERIAL0_REC_CTRL, rec_par)); - - /* 8 bit, no/even parity, 1 stop bit, no cts */ - info->tx_ctrl &= ~(IO_MASK(R_SERIAL0_TR_CTRL, tr_bitnr) | - IO_MASK(R_SERIAL0_TR_CTRL, tr_par_en) | - IO_MASK(R_SERIAL0_TR_CTRL, tr_par) | - IO_MASK(R_SERIAL0_TR_CTRL, stop_bits) | - IO_MASK(R_SERIAL0_TR_CTRL, auto_cts)); - - if ((cflag & CSIZE) == CS7) { - /* set 7 bit mode */ - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit); - info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit); - } - - if (cflag & CSTOPB) { - /* set 2 stop bit mode */ - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, stop_bits, two_bits); - } - - if (cflag & PARENB) { - /* enable parity */ - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable); - info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable); - } - - if (cflag & CMSPAR) { - /* enable stick parity, PARODD mean Mark which matches ETRAX */ - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_stick_par, stick); - info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, stick); - } - if (cflag & PARODD) { - /* set odd parity (or Mark if CMSPAR) */ - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par, odd); - info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd); - } - - if (cflag & CRTSCTS) { - /* enable automatic CTS handling */ - DFLOW(DEBUG_LOG(info->line, "FLOW auto_cts enabled\n", 0)); - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, active); - } - - /* make sure the tx and rx are enabled */ - - info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable); - info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable); - - /* actually write the control regs to the hardware */ - - info->ioport[REG_TR_CTRL] = info->tx_ctrl; - info->ioport[REG_REC_CTRL] = info->rx_ctrl; - xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty)); - xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); - if (info->port.tty->termios->c_iflag & IXON ) { - DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n", - STOP_CHAR(info->port.tty))); - xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); - } - - *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; - local_irq_restore(flags); -#endif /* !CONFIG_SVINTO_SIM */ - - update_char_time(info); - -} /* change_speed */ - -/* start transmitting chars NOW */ - -static void -rs_flush_chars(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - if (info->tr_running || - info->xmit.head == info->xmit.tail || - tty->stopped || - tty->hw_stopped || - !info->xmit.buf) - return; - -#ifdef SERIAL_DEBUG_FLOW - printk("rs_flush_chars\n"); -#endif - - /* this protection might not exactly be necessary here */ - - local_irq_save(flags); - start_transmit(info); - local_irq_restore(flags); -} - -static int rs_raw_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - int c, ret = 0; - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - /* first some sanity checks */ - - if (!tty || !info->xmit.buf || !tmp_buf) - return 0; - -#ifdef SERIAL_DEBUG_DATA - if (info->line == SERIAL_DEBUG_LINE) - printk("rs_raw_write (%d), status %d\n", - count, info->ioport[REG_STATUS]); -#endif - -#ifdef CONFIG_SVINTO_SIM - /* Really simple. The output is here and now. */ - SIMCOUT(buf, count); - return count; -#endif - local_save_flags(flags); - DFLOW(DEBUG_LOG(info->line, "write count %i ", count)); - DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty))); - - - /* The local_irq_disable/restore_flags pairs below are needed - * because the DMA interrupt handler moves the info->xmit values. - * the memcpy needs to be in the critical region unfortunately, - * because we need to read xmit values, memcpy, write xmit values - * in one atomic operation... this could perhaps be avoided by - * more clever design. - */ - local_irq_disable(); - while (count) { - c = CIRC_SPACE_TO_END(info->xmit.head, - info->xmit.tail, - SERIAL_XMIT_SIZE); - - if (count < c) - c = count; - if (c <= 0) - break; - - memcpy(info->xmit.buf + info->xmit.head, buf, c); - info->xmit.head = (info->xmit.head + c) & - (SERIAL_XMIT_SIZE-1); - buf += c; - count -= c; - ret += c; - } - local_irq_restore(flags); - - /* enable transmitter if not running, unless the tty is stopped - * this does not need IRQ protection since if tr_running == 0 - * the IRQ's are not running anyway for this port. - */ - DFLOW(DEBUG_LOG(info->line, "write ret %i\n", ret)); - - if (info->xmit.head != info->xmit.tail && - !tty->stopped && - !tty->hw_stopped && - !info->tr_running) { - start_transmit(info); - } - - return ret; -} /* raw_raw_write() */ - -static int -rs_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ -#if defined(CONFIG_ETRAX_RS485) - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - - if (info->rs485.flags & SER_RS485_ENABLED) - { - /* If we are in RS-485 mode, we need to toggle RTS and disable - * the receiver before initiating a DMA transfer - */ -#ifdef CONFIG_ETRAX_FAST_TIMER - /* Abort any started timer */ - fast_timers_rs485[info->line].function = NULL; - del_fast_timer(&fast_timers_rs485[info->line]); -#endif - e100_rts(info, (info->rs485.flags & SER_RS485_RTS_ON_SEND)); -#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) - e100_disable_rx(info); - e100_enable_rx_irq(info); -#endif - if ((info->rs485.flags & SER_RS485_RTS_BEFORE_SEND) && - (info->rs485.delay_rts_before_send > 0)) - msleep(info->rs485.delay_rts_before_send); - } -#endif /* CONFIG_ETRAX_RS485 */ - - count = rs_raw_write(tty, buf, count); - -#if defined(CONFIG_ETRAX_RS485) - if (info->rs485.flags & SER_RS485_ENABLED) - { - unsigned int val; - /* If we are in RS-485 mode the following has to be done: - * wait until DMA is ready - * wait on transmit shift register - * toggle RTS - * enable the receiver - */ - - /* Sleep until all sent */ - tty_wait_until_sent(tty, 0); -#ifdef CONFIG_ETRAX_FAST_TIMER - /* Now sleep a little more so that shift register is empty */ - schedule_usleep(info->char_time_usec * 2); -#endif - /* wait on transmit shift register */ - do{ - get_lsr_info(info, &val); - }while (!(val & TIOCSER_TEMT)); - - e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND)); - -#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) - e100_enable_rx(info); - e100_enable_rxdma_irq(info); -#endif - } -#endif /* CONFIG_ETRAX_RS485 */ - - return count; -} /* rs_write */ - - -/* how much space is available in the xmit buffer? */ - -static int -rs_write_room(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - - return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); -} - -/* How many chars are in the xmit buffer? - * This does not include any chars in the transmitter FIFO. - * Use wait_until_sent for waiting for FIFO drain. - */ - -static int -rs_chars_in_buffer(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - - return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); -} - -/* discard everything in the xmit buffer */ - -static void -rs_flush_buffer(struct tty_struct *tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - local_irq_save(flags); - info->xmit.head = info->xmit.tail = 0; - local_irq_restore(flags); - - tty_wakeup(tty); -} - -/* - * This function is used to send a high-priority XON/XOFF character to - * the device - * - * Since we use DMA we don't check for info->x_char in transmit_chars_dma(), - * but we do it in handle_ser_tx_interrupt(). - * We disable DMA channel and enable tx ready interrupt and write the - * character when possible. - */ -static void rs_send_xchar(struct tty_struct *tty, char ch) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - local_irq_save(flags); - if (info->uses_dma_out) { - /* Put the DMA on hold and disable the channel */ - *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold); - while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) != - IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, hold)); - e100_disable_txdma_channel(info); - } - - /* Must make sure transmitter is not stopped before we can transmit */ - if (tty->stopped) - rs_start(tty); - - /* Enable manual transmit interrupt and send from there */ - DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch)); - info->x_char = ch; - e100_enable_serial_tx_ready_irq(info); - local_irq_restore(flags); -} - -/* - * ------------------------------------------------------------ - * rs_throttle() - * - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - * ------------------------------------------------------------ - */ -static void -rs_throttle(struct tty_struct * tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %lu....\n", tty_name(tty, buf), - (unsigned long)tty->ldisc.chars_in_buffer(tty)); -#endif - DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty))); - - /* Do RTS before XOFF since XOFF might take some time */ - if (tty->termios->c_cflag & CRTSCTS) { - /* Turn off RTS line */ - e100_rts(info, 0); - } - if (I_IXOFF(tty)) - rs_send_xchar(tty, STOP_CHAR(tty)); - -} - -static void -rs_unthrottle(struct tty_struct * tty) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("unthrottle %s: %lu....\n", tty_name(tty, buf), - (unsigned long)tty->ldisc.chars_in_buffer(tty)); -#endif - DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty))); - DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count)); - /* Do RTS before XOFF since XOFF might take some time */ - if (tty->termios->c_cflag & CRTSCTS) { - /* Assert RTS line */ - e100_rts(info, 1); - } - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - rs_send_xchar(tty, START_CHAR(tty)); - } - -} - -/* - * ------------------------------------------------------------ - * rs_ioctl() and friends - * ------------------------------------------------------------ - */ - -static int -get_serial_info(struct e100_serial * info, - struct serial_struct * retinfo) -{ - struct serial_struct tmp; - - /* this is all probably wrong, there are a lot of fields - * here that we don't have in e100_serial and maybe we - * should set them to something else than 0. - */ - - if (!retinfo) - return -EFAULT; - memset(&tmp, 0, sizeof(tmp)); - tmp.type = info->type; - tmp.line = info->line; - tmp.port = (int)info->ioport; - tmp.irq = info->irq; - tmp.flags = info->flags; - tmp.baud_base = info->baud_base; - tmp.close_delay = info->close_delay; - tmp.closing_wait = info->closing_wait; - tmp.custom_divisor = info->custom_divisor; - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return 0; -} - -static int -set_serial_info(struct e100_serial *info, - struct serial_struct *new_info) -{ - struct serial_struct new_serial; - struct e100_serial old_info; - int retval = 0; - - if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; - - old_info = *info; - - if (!capable(CAP_SYS_ADMIN)) { - if ((new_serial.type != info->type) || - (new_serial.close_delay != info->close_delay) || - ((new_serial.flags & ~ASYNC_USR_MASK) != - (info->flags & ~ASYNC_USR_MASK))) - return -EPERM; - info->flags = ((info->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - goto check_and_exit; - } - - if (info->count > 1) - return -EBUSY; - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - - info->baud_base = new_serial.baud_base; - info->flags = ((info->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - info->custom_divisor = new_serial.custom_divisor; - info->type = new_serial.type; - info->close_delay = new_serial.close_delay; - info->closing_wait = new_serial.closing_wait; - info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - check_and_exit: - if (info->flags & ASYNC_INITIALIZED) { - change_speed(info); - } else - retval = startup(info); - return retval; -} - -/* - * get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int -get_lsr_info(struct e100_serial * info, unsigned int *value) -{ - unsigned int result = TIOCSER_TEMT; -#ifndef CONFIG_SVINTO_SIM - unsigned long curr_time = jiffies; - unsigned long curr_time_usec = GET_JIFFIES_USEC(); - unsigned long elapsed_usec = - (curr_time - info->last_tx_active) * 1000000/HZ + - curr_time_usec - info->last_tx_active_usec; - - if (info->xmit.head != info->xmit.tail || - elapsed_usec < 2*info->char_time_usec) { - result = 0; - } -#endif - - if (copy_to_user(value, &result, sizeof(int))) - return -EFAULT; - return 0; -} - -#ifdef SERIAL_DEBUG_IO -struct state_str -{ - int state; - const char *str; -}; - -const struct state_str control_state_str[] = { - {TIOCM_DTR, "DTR" }, - {TIOCM_RTS, "RTS"}, - {TIOCM_ST, "ST?" }, - {TIOCM_SR, "SR?" }, - {TIOCM_CTS, "CTS" }, - {TIOCM_CD, "CD" }, - {TIOCM_RI, "RI" }, - {TIOCM_DSR, "DSR" }, - {0, NULL } -}; - -char *get_control_state_str(int MLines, char *s) -{ - int i = 0; - - s[0]='\0'; - while (control_state_str[i].str != NULL) { - if (MLines & control_state_str[i].state) { - if (s[0] != '\0') { - strcat(s, ", "); - } - strcat(s, control_state_str[i].str); - } - i++; - } - return s; -} -#endif - -static int -rs_break(struct tty_struct *tty, int break_state) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - if (!info->ioport) - return -EIO; - - local_irq_save(flags); - if (break_state == -1) { - /* Go to manual mode and set the txd pin to 0 */ - /* Clear bit 7 (txd) and 6 (tr_enable) */ - info->tx_ctrl &= 0x3F; - } else { - /* Set bit 7 (txd) and 6 (tr_enable) */ - info->tx_ctrl |= (0x80 | 0x40); - } - info->ioport[REG_TR_CTRL] = info->tx_ctrl; - local_irq_restore(flags); - return 0; -} - -static int -rs_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - local_irq_save(flags); - - if (clear & TIOCM_RTS) - e100_rts(info, 0); - if (clear & TIOCM_DTR) - e100_dtr(info, 0); - /* Handle FEMALE behaviour */ - if (clear & TIOCM_RI) - e100_ri_out(info, 0); - if (clear & TIOCM_CD) - e100_cd_out(info, 0); - - if (set & TIOCM_RTS) - e100_rts(info, 1); - if (set & TIOCM_DTR) - e100_dtr(info, 1); - /* Handle FEMALE behaviour */ - if (set & TIOCM_RI) - e100_ri_out(info, 1); - if (set & TIOCM_CD) - e100_cd_out(info, 1); - - local_irq_restore(flags); - return 0; -} - -static int -rs_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned int result; - unsigned long flags; - - local_irq_save(flags); - - result = - (!E100_RTS_GET(info) ? TIOCM_RTS : 0) - | (!E100_DTR_GET(info) ? TIOCM_DTR : 0) - | (!E100_RI_GET(info) ? TIOCM_RNG : 0) - | (!E100_DSR_GET(info) ? TIOCM_DSR : 0) - | (!E100_CD_GET(info) ? TIOCM_CAR : 0) - | (!E100_CTS_GET(info) ? TIOCM_CTS : 0); - - local_irq_restore(flags); - -#ifdef SERIAL_DEBUG_IO - printk(KERN_DEBUG "ser%i: modem state: %i 0x%08X\n", - info->line, result, result); - { - char s[100]; - - get_control_state_str(result, s); - printk(KERN_DEBUG "state: %s\n", s); - } -#endif - return result; - -} - - -static int -rs_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) -{ - struct e100_serial * info = (struct e100_serial *)tty->driver_data; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && - (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case TIOCGSERIAL: - return get_serial_info(info, - (struct serial_struct *) arg); - case TIOCSSERIAL: - return set_serial_info(info, - (struct serial_struct *) arg); - case TIOCSERGETLSR: /* Get line status register */ - return get_lsr_info(info, (unsigned int *) arg); - - case TIOCSERGSTRUCT: - if (copy_to_user((struct e100_serial *) arg, - info, sizeof(struct e100_serial))) - return -EFAULT; - return 0; - -#if defined(CONFIG_ETRAX_RS485) - case TIOCSERSETRS485: - { - /* In this ioctl we still use the old structure - * rs485_control for backward compatibility - * (if we use serial_rs485, then old user-level code - * wouldn't work anymore...). - * The use of this ioctl is deprecated: use TIOCSRS485 - * instead.*/ - struct rs485_control rs485ctrl; - struct serial_rs485 rs485data; - printk(KERN_DEBUG "The use of this ioctl is deprecated. Use TIOCSRS485 instead\n"); - if (copy_from_user(&rs485ctrl, (struct rs485_control *)arg, - sizeof(rs485ctrl))) - return -EFAULT; - - rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send; - rs485data.flags = 0; - if (rs485data.delay_rts_before_send != 0) - rs485data.flags |= SER_RS485_RTS_BEFORE_SEND; - else - rs485data.flags &= ~(SER_RS485_RTS_BEFORE_SEND); - - if (rs485ctrl.enabled) - rs485data.flags |= SER_RS485_ENABLED; - else - rs485data.flags &= ~(SER_RS485_ENABLED); - - if (rs485ctrl.rts_on_send) - rs485data.flags |= SER_RS485_RTS_ON_SEND; - else - rs485data.flags &= ~(SER_RS485_RTS_ON_SEND); - - if (rs485ctrl.rts_after_sent) - rs485data.flags |= SER_RS485_RTS_AFTER_SEND; - else - rs485data.flags &= ~(SER_RS485_RTS_AFTER_SEND); - - return e100_enable_rs485(tty, &rs485data); - } - - case TIOCSRS485: - { - /* This is the new version of TIOCSRS485, with new - * data structure serial_rs485 */ - struct serial_rs485 rs485data; - if (copy_from_user(&rs485data, (struct rs485_control *)arg, - sizeof(rs485data))) - return -EFAULT; - - return e100_enable_rs485(tty, &rs485data); - } - - case TIOCGRS485: - { - struct serial_rs485 *rs485data = - &(((struct e100_serial *)tty->driver_data)->rs485); - /* This is the ioctl to get RS485 data from user-space */ - if (copy_to_user((struct serial_rs485 *) arg, - rs485data, - sizeof(struct serial_rs485))) - return -EFAULT; - break; - } - - case TIOCSERWRRS485: - { - struct rs485_write rs485wr; - if (copy_from_user(&rs485wr, (struct rs485_write *)arg, - sizeof(rs485wr))) - return -EFAULT; - - return e100_write_rs485(tty, rs485wr.outc, rs485wr.outc_size); - } -#endif - - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static void -rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - - change_speed(info); - - /* Handle turning off CRTSCTS */ - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - rs_start(tty); - } - -} - -/* - * ------------------------------------------------------------ - * rs_close() - * - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * S structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - * ------------------------------------------------------------ - */ -static void -rs_close(struct tty_struct *tty, struct file * filp) -{ - struct e100_serial * info = (struct e100_serial *)tty->driver_data; - unsigned long flags; - - if (!info) - return; - - /* interrupts are disabled for this entire function */ - - local_irq_save(flags); - - if (tty_hung_up_p(filp)) { - local_irq_restore(flags); - return; - } - -#ifdef SERIAL_DEBUG_OPEN - printk("[%d] rs_close ttyS%d, count = %d\n", current->pid, - info->line, info->count); -#endif - if ((tty->count == 1) && (info->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_CRIT - "rs_close: bad serial port count; tty->count is 1, " - "info->count is %d\n", info->count); - info->count = 1; - } - if (--info->count < 0) { - printk(KERN_CRIT "rs_close: bad serial port count for ttyS%d: %d\n", - info->line, info->count); - info->count = 0; - } - if (info->count) { - local_irq_restore(flags); - return; - } - info->flags |= ASYNC_CLOSING; - /* - * Save the termios structure, since this port may have - * separate termios for callout and dialin. - */ - if (info->flags & ASYNC_NORMAL_ACTIVE) - info->normal_termios = *tty->termios; - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); - /* - * At this point we stop accepting input. To do this, we - * disable the serial receiver and the DMA receive interrupt. - */ -#ifdef SERIAL_HANDLE_EARLY_ERRORS - e100_disable_serial_data_irq(info); -#endif - -#ifndef CONFIG_SVINTO_SIM - e100_disable_rx(info); - e100_disable_rx_irq(info); - - if (info->flags & ASYNC_INITIALIZED) { - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important as we have a transmit FIFO! - */ - rs_wait_until_sent(tty, HZ); - } -#endif - - shutdown(info); - rs_flush_buffer(tty); - tty_ldisc_flush(tty); - tty->closing = 0; - info->event = 0; - info->port.tty = NULL; - if (info->blocked_open) { - if (info->close_delay) - schedule_timeout_interruptible(info->close_delay); - wake_up_interruptible(&info->open_wait); - } - info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); - local_irq_restore(flags); - - /* port closed */ - -#if defined(CONFIG_ETRAX_RS485) - if (info->rs485.flags & SER_RS485_ENABLED) { - info->rs485.flags &= ~(SER_RS485_ENABLED); -#if defined(CONFIG_ETRAX_RS485_ON_PA) - *R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit); -#endif -#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - rs485_port_g_bit, 0); -#endif -#if defined(CONFIG_ETRAX_RS485_LTC1387) - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 0); - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 0); -#endif - } -#endif - - /* - * Release any allocated DMA irq's. - */ - if (info->dma_in_enabled) { - free_irq(info->dma_in_irq_nbr, info); - cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); - info->uses_dma_in = 0; -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "DMA irq '%s' freed\n", - info->dma_in_irq_description); -#endif - } - if (info->dma_out_enabled) { - free_irq(info->dma_out_irq_nbr, info); - cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); - info->uses_dma_out = 0; -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "DMA irq '%s' freed\n", - info->dma_out_irq_description); -#endif - } -} - -/* - * rs_wait_until_sent() --- wait until the transmitter is empty - */ -static void rs_wait_until_sent(struct tty_struct *tty, int timeout) -{ - unsigned long orig_jiffies; - struct e100_serial *info = (struct e100_serial *)tty->driver_data; - unsigned long curr_time = jiffies; - unsigned long curr_time_usec = GET_JIFFIES_USEC(); - long elapsed_usec = - (curr_time - info->last_tx_active) * (1000000/HZ) + - curr_time_usec - info->last_tx_active_usec; - - /* - * Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO - * R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k) - */ - orig_jiffies = jiffies; - while (info->xmit.head != info->xmit.tail || /* More in send queue */ - (*info->ostatusadr & 0x007f) || /* more in FIFO */ - (elapsed_usec < 2*info->char_time_usec)) { - schedule_timeout_interruptible(1); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - break; - curr_time = jiffies; - curr_time_usec = GET_JIFFIES_USEC(); - elapsed_usec = - (curr_time - info->last_tx_active) * (1000000/HZ) + - curr_time_usec - info->last_tx_active_usec; - } - set_current_state(TASK_RUNNING); -} - -/* - * rs_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -void -rs_hangup(struct tty_struct *tty) -{ - struct e100_serial * info = (struct e100_serial *)tty->driver_data; - - rs_flush_buffer(tty); - shutdown(info); - info->event = 0; - info->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->port.tty = NULL; - wake_up_interruptible(&info->open_wait); -} - -/* - * ------------------------------------------------------------ - * rs_open() and friends - * ------------------------------------------------------------ - */ -static int -block_til_ready(struct tty_struct *tty, struct file * filp, - struct e100_serial *info) -{ - DECLARE_WAITQUEUE(wait, current); - unsigned long flags; - int retval; - int do_clocal = 0, extra_count = 0; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - wait_event_interruptible_tty(info->close_wait, - !(info->flags & ASYNC_CLOSING)); -#ifdef SERIAL_DO_RESTART - if (info->flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; -#else - return -EAGAIN; -#endif - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) { - do_clocal = 1; - } - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->open_wait, &wait); -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready before block: ttyS%d, count = %d\n", - info->line, info->count); -#endif - local_irq_save(flags); - if (!tty_hung_up_p(filp)) { - extra_count++; - info->count--; - } - local_irq_restore(flags); - info->blocked_open++; - while (1) { - local_irq_save(flags); - /* assert RTS and DTR */ - e100_rts(info, 1); - e100_dtr(info, 1); - local_irq_restore(flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(info->flags & ASYNC_INITIALIZED)) { -#ifdef SERIAL_DO_RESTART - if (info->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; -#else - retval = -EAGAIN; -#endif - break; - } - if (!(info->flags & ASYNC_CLOSING) && do_clocal) - /* && (do_clocal || DCD_IS_ASSERTED) */ - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready blocking: ttyS%d, count = %d\n", - info->line, info->count); -#endif - tty_unlock(); - schedule(); - tty_lock(); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&info->open_wait, &wait); - if (extra_count) - info->count++; - info->blocked_open--; -#ifdef SERIAL_DEBUG_OPEN - printk("block_til_ready after blocking: ttyS%d, count = %d\n", - info->line, info->count); -#endif - if (retval) - return retval; - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} - -static void -deinit_port(struct e100_serial *info) -{ - if (info->dma_out_enabled) { - cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); - free_irq(info->dma_out_irq_nbr, info); - } - if (info->dma_in_enabled) { - cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); - free_irq(info->dma_in_irq_nbr, info); - } -} - -/* - * This routine is called whenever a serial port is opened. - * It performs the serial-specific initialization for the tty structure. - */ -static int -rs_open(struct tty_struct *tty, struct file * filp) -{ - struct e100_serial *info; - int retval, line; - unsigned long page; - int allocated_resources = 0; - - /* find which port we want to open */ - line = tty->index; - - if (line < 0 || line >= NR_PORTS) - return -ENODEV; - - /* find the corresponding e100_serial struct in the table */ - info = rs_table + line; - - /* don't allow the opening of ports that are not enabled in the HW config */ - if (!info->enabled) - return -ENODEV; - -#ifdef SERIAL_DEBUG_OPEN - printk("[%d] rs_open %s, count = %d\n", current->pid, tty->name, - info->count); -#endif - - info->count++; - tty->driver_data = info; - info->port.tty = tty; - - info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - if (!tmp_buf) { - page = get_zeroed_page(GFP_KERNEL); - if (!page) { - return -ENOMEM; - } - if (tmp_buf) - free_page(page); - else - tmp_buf = (unsigned char *) page; - } - - /* - * If the port is in the middle of closing, bail out now - */ - if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - wait_event_interruptible_tty(info->close_wait, - !(info->flags & ASYNC_CLOSING)); -#ifdef SERIAL_DO_RESTART - return ((info->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS); -#else - return -EAGAIN; -#endif - } - - /* - * If DMA is enabled try to allocate the irq's. - */ - if (info->count == 1) { - allocated_resources = 1; - if (info->dma_in_enabled) { - if (request_irq(info->dma_in_irq_nbr, - rec_interrupt, - info->dma_in_irq_flags, - info->dma_in_irq_description, - info)) { - printk(KERN_WARNING "DMA irq '%s' busy; " - "falling back to non-DMA mode\n", - info->dma_in_irq_description); - /* Make sure we never try to use DMA in */ - /* for the port again. */ - info->dma_in_enabled = 0; - } else if (cris_request_dma(info->dma_in_nbr, - info->dma_in_irq_description, - DMA_VERBOSE_ON_ERROR, - info->dma_owner)) { - free_irq(info->dma_in_irq_nbr, info); - printk(KERN_WARNING "DMA '%s' busy; " - "falling back to non-DMA mode\n", - info->dma_in_irq_description); - /* Make sure we never try to use DMA in */ - /* for the port again. */ - info->dma_in_enabled = 0; - } -#ifdef SERIAL_DEBUG_OPEN - else - printk(KERN_DEBUG "DMA irq '%s' allocated\n", - info->dma_in_irq_description); -#endif - } - if (info->dma_out_enabled) { - if (request_irq(info->dma_out_irq_nbr, - tr_interrupt, - info->dma_out_irq_flags, - info->dma_out_irq_description, - info)) { - printk(KERN_WARNING "DMA irq '%s' busy; " - "falling back to non-DMA mode\n", - info->dma_out_irq_description); - /* Make sure we never try to use DMA out */ - /* for the port again. */ - info->dma_out_enabled = 0; - } else if (cris_request_dma(info->dma_out_nbr, - info->dma_out_irq_description, - DMA_VERBOSE_ON_ERROR, - info->dma_owner)) { - free_irq(info->dma_out_irq_nbr, info); - printk(KERN_WARNING "DMA '%s' busy; " - "falling back to non-DMA mode\n", - info->dma_out_irq_description); - /* Make sure we never try to use DMA out */ - /* for the port again. */ - info->dma_out_enabled = 0; - } -#ifdef SERIAL_DEBUG_OPEN - else - printk(KERN_DEBUG "DMA irq '%s' allocated\n", - info->dma_out_irq_description); -#endif - } - } - - /* - * Start up the serial port - */ - - retval = startup(info); - if (retval) { - if (allocated_resources) - deinit_port(info); - - /* FIXME Decrease count info->count here too? */ - return retval; - } - - - retval = block_til_ready(tty, filp, info); - if (retval) { -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open returning after block_til_ready with %d\n", - retval); -#endif - if (allocated_resources) - deinit_port(info); - - return retval; - } - - if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) { - *tty->termios = info->normal_termios; - change_speed(info); - } - -#ifdef SERIAL_DEBUG_OPEN - printk("rs_open ttyS%d successful...\n", info->line); -#endif - DLOG_INT_TRIG( log_int_pos = 0); - - DFLIP( if (info->line == SERIAL_DEBUG_LINE) { - info->icount.rx = 0; - } ); - - return 0; -} - -#ifdef CONFIG_PROC_FS -/* - * /proc fs routines.... - */ - -static void seq_line_info(struct seq_file *m, struct e100_serial *info) -{ - unsigned long tmp; - - seq_printf(m, "%d: uart:E100 port:%lX irq:%d", - info->line, (unsigned long)info->ioport, info->irq); - - if (!info->ioport || (info->type == PORT_UNKNOWN)) { - seq_printf(m, "\n"); - return; - } - - seq_printf(m, " baud:%d", info->baud); - seq_printf(m, " tx:%lu rx:%lu", - (unsigned long)info->icount.tx, - (unsigned long)info->icount.rx); - tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); - if (tmp) - seq_printf(m, " tx_pend:%lu/%lu", - (unsigned long)tmp, - (unsigned long)SERIAL_XMIT_SIZE); - - seq_printf(m, " rx_pend:%lu/%lu", - (unsigned long)info->recv_cnt, - (unsigned long)info->max_recv_cnt); - -#if 1 - if (info->port.tty) { - if (info->port.tty->stopped) - seq_printf(m, " stopped:%i", - (int)info->port.tty->stopped); - if (info->port.tty->hw_stopped) - seq_printf(m, " hw_stopped:%i", - (int)info->port.tty->hw_stopped); - } - - { - unsigned char rstat = info->ioport[REG_STATUS]; - if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect)) - seq_printf(m, " xoff_detect:1"); - } - -#endif - - if (info->icount.frame) - seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame); - - if (info->icount.parity) - seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity); - - if (info->icount.brk) - seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk); - - if (info->icount.overrun) - seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun); - - /* - * Last thing is the RS-232 status lines - */ - if (!E100_RTS_GET(info)) - seq_puts(m, "|RTS"); - if (!E100_CTS_GET(info)) - seq_puts(m, "|CTS"); - if (!E100_DTR_GET(info)) - seq_puts(m, "|DTR"); - if (!E100_DSR_GET(info)) - seq_puts(m, "|DSR"); - if (!E100_CD_GET(info)) - seq_puts(m, "|CD"); - if (!E100_RI_GET(info)) - seq_puts(m, "|RI"); - seq_puts(m, "\n"); -} - - -static int crisv10_proc_show(struct seq_file *m, void *v) -{ - int i; - - seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); - - for (i = 0; i < NR_PORTS; i++) { - if (!rs_table[i].enabled) - continue; - seq_line_info(m, &rs_table[i]); - } -#ifdef DEBUG_LOG_INCLUDED - for (i = 0; i < debug_log_pos; i++) { - seq_printf(m, "%-4i %lu.%lu ", - i, debug_log[i].time, - timer_data_to_ns(debug_log[i].timer_data)); - seq_printf(m, debug_log[i].string, debug_log[i].value); - } - seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE); - debug_log_pos = 0; -#endif - return 0; -} - -static int crisv10_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, crisv10_proc_show, NULL); -} - -static const struct file_operations crisv10_proc_fops = { - .owner = THIS_MODULE, - .open = crisv10_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; -#endif - - -/* Finally, routines used to initialize the serial driver. */ - -static void show_serial_version(void) -{ - printk(KERN_INFO - "ETRAX 100LX serial-driver %s, " - "(c) 2000-2004 Axis Communications AB\r\n", - &serial_version[11]); /* "$Revision: x.yy" */ -} - -/* rs_init inits the driver at boot (using the module_init chain) */ - -static const struct tty_operations rs_ops = { - .open = rs_open, - .close = rs_close, - .write = rs_write, - .flush_chars = rs_flush_chars, - .write_room = rs_write_room, - .chars_in_buffer = rs_chars_in_buffer, - .flush_buffer = rs_flush_buffer, - .ioctl = rs_ioctl, - .throttle = rs_throttle, - .unthrottle = rs_unthrottle, - .set_termios = rs_set_termios, - .stop = rs_stop, - .start = rs_start, - .hangup = rs_hangup, - .break_ctl = rs_break, - .send_xchar = rs_send_xchar, - .wait_until_sent = rs_wait_until_sent, - .tiocmget = rs_tiocmget, - .tiocmset = rs_tiocmset, -#ifdef CONFIG_PROC_FS - .proc_fops = &crisv10_proc_fops, -#endif -}; - -static int __init rs_init(void) -{ - int i; - struct e100_serial *info; - struct tty_driver *driver = alloc_tty_driver(NR_PORTS); - - if (!driver) - return -ENOMEM; - - show_serial_version(); - - /* Setup the timed flush handler system */ - -#if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER) - setup_timer(&flush_timer, timed_flush_handler, 0); - mod_timer(&flush_timer, jiffies + 5); -#endif - -#if defined(CONFIG_ETRAX_RS485) -#if defined(CONFIG_ETRAX_RS485_ON_PA) - if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit, - rs485_pa_bit)) { - printk(KERN_CRIT "ETRAX100LX serial: Could not allocate " - "RS485 pin\n"); - put_tty_driver(driver); - return -EBUSY; - } -#endif -#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) - if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit, - rs485_port_g_bit)) { - printk(KERN_CRIT "ETRAX100LX serial: Could not allocate " - "RS485 pin\n"); - put_tty_driver(driver); - return -EBUSY; - } -#endif -#endif - - /* Initialize the tty_driver structure */ - - driver->driver_name = "serial"; - driver->name = "ttyS"; - driver->major = TTY_MAJOR; - driver->minor_start = 64; - driver->type = TTY_DRIVER_TYPE_SERIAL; - driver->subtype = SERIAL_TYPE_NORMAL; - driver->init_termios = tty_std_termios; - driver->init_termios.c_cflag = - B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */ - driver->init_termios.c_ispeed = 115200; - driver->init_termios.c_ospeed = 115200; - driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - - tty_set_operations(driver, &rs_ops); - serial_driver = driver; - if (tty_register_driver(driver)) - panic("Couldn't register serial driver\n"); - /* do some initializing for the separate ports */ - - for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) { - if (info->enabled) { - if (cris_request_io_interface(info->io_if, - info->io_if_description)) { - printk(KERN_CRIT "ETRAX100LX async serial: " - "Could not allocate IO pins for " - "%s, port %d\n", - info->io_if_description, i); - info->enabled = 0; - } - } - info->uses_dma_in = 0; - info->uses_dma_out = 0; - info->line = i; - info->port.tty = NULL; - info->type = PORT_ETRAX; - info->tr_running = 0; - info->forced_eop = 0; - info->baud_base = DEF_BAUD_BASE; - info->custom_divisor = 0; - info->flags = 0; - info->close_delay = 5*HZ/10; - info->closing_wait = 30*HZ; - info->x_char = 0; - info->event = 0; - info->count = 0; - info->blocked_open = 0; - info->normal_termios = driver->init_termios; - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - info->xmit.buf = NULL; - info->xmit.tail = info->xmit.head = 0; - info->first_recv_buffer = info->last_recv_buffer = NULL; - info->recv_cnt = info->max_recv_cnt = 0; - info->last_tx_active_usec = 0; - info->last_tx_active = 0; - -#if defined(CONFIG_ETRAX_RS485) - /* Set sane defaults */ - info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND); - info->rs485.flags |= SER_RS485_RTS_AFTER_SEND; - info->rs485.flags &= ~(SER_RS485_RTS_BEFORE_SEND); - info->rs485.delay_rts_before_send = 0; - info->rs485.flags &= ~(SER_RS485_ENABLED); -#endif - INIT_WORK(&info->work, do_softint); - - if (info->enabled) { - printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n", - serial_driver->name, info->line, info->ioport); - } - } -#ifdef CONFIG_ETRAX_FAST_TIMER -#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER - memset(fast_timers, 0, sizeof(fast_timers)); -#endif -#ifdef CONFIG_ETRAX_RS485 - memset(fast_timers_rs485, 0, sizeof(fast_timers_rs485)); -#endif - fast_timer_init(); -#endif - -#ifndef CONFIG_SVINTO_SIM -#ifndef CONFIG_ETRAX_KGDB - /* Not needed in simulator. May only complicate stuff. */ - /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */ - - if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, - IRQF_SHARED | IRQF_DISABLED, "serial ", driver)) - panic("%s: Failed to request irq8", __func__); - -#endif -#endif /* CONFIG_SVINTO_SIM */ - - return 0; -} - -/* this makes sure that rs_init is called during kernel boot */ - -module_init(rs_init); diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h deleted file mode 100644 index ea0beb46a10d..000000000000 --- a/drivers/serial/crisv10.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * serial.h: Arch-dep definitions for the Etrax100 serial driver. - * - * Copyright (C) 1998-2007 Axis Communications AB - */ - -#ifndef _ETRAX_SERIAL_H -#define _ETRAX_SERIAL_H - -#include -#include -#include -#include - -/* Software state per channel */ - -#ifdef __KERNEL__ -/* - * This is our internal structure for each serial port's state. - * - * Many fields are paralleled by the structure used by the serial_struct - * structure. - * - * For definitions of the flags field, see tty.h - */ - -#define SERIAL_RECV_DESCRIPTORS 8 - -struct etrax_recv_buffer { - struct etrax_recv_buffer *next; - unsigned short length; - unsigned char error; - unsigned char pad; - - unsigned char buffer[0]; -}; - -struct e100_serial { - struct tty_port port; - int baud; - volatile u8 *ioport; /* R_SERIALx_CTRL */ - u32 irq; /* bitnr in R_IRQ_MASK2 for dmaX_descr */ - - /* Output registers */ - volatile u8 *oclrintradr; /* adr to R_DMA_CHx_CLR_INTR */ - volatile u32 *ofirstadr; /* adr to R_DMA_CHx_FIRST */ - volatile u8 *ocmdadr; /* adr to R_DMA_CHx_CMD */ - const volatile u8 *ostatusadr; /* adr to R_DMA_CHx_STATUS */ - - /* Input registers */ - volatile u8 *iclrintradr; /* adr to R_DMA_CHx_CLR_INTR */ - volatile u32 *ifirstadr; /* adr to R_DMA_CHx_FIRST */ - volatile u8 *icmdadr; /* adr to R_DMA_CHx_CMD */ - volatile u32 *idescradr; /* adr to R_DMA_CHx_DESCR */ - - int flags; /* defined in tty.h */ - - u8 rx_ctrl; /* shadow for R_SERIALx_REC_CTRL */ - u8 tx_ctrl; /* shadow for R_SERIALx_TR_CTRL */ - u8 iseteop; /* bit number for R_SET_EOP for the input dma */ - int enabled; /* Set to 1 if the port is enabled in HW config */ - - u8 dma_out_enabled; /* Set to 1 if DMA should be used */ - u8 dma_in_enabled; /* Set to 1 if DMA should be used */ - - /* end of fields defined in rs_table[] in .c-file */ - int dma_owner; - unsigned int dma_in_nbr; - unsigned int dma_out_nbr; - unsigned int dma_in_irq_nbr; - unsigned int dma_out_irq_nbr; - unsigned long dma_in_irq_flags; - unsigned long dma_out_irq_flags; - char *dma_in_irq_description; - char *dma_out_irq_description; - - enum cris_io_interface io_if; - char *io_if_description; - - u8 uses_dma_in; /* Set to 1 if DMA is used */ - u8 uses_dma_out; /* Set to 1 if DMA is used */ - u8 forced_eop; /* a fifo eop has been forced */ - int baud_base; /* For special baudrates */ - int custom_divisor; /* For special baudrates */ - struct etrax_dma_descr tr_descr; - struct etrax_dma_descr rec_descr[SERIAL_RECV_DESCRIPTORS]; - int cur_rec_descr; - - volatile int tr_running; /* 1 if output is running */ - - struct tty_struct *tty; - int read_status_mask; - int ignore_status_mask; - int x_char; /* xon/xoff character */ - int close_delay; - unsigned short closing_wait; - unsigned short closing_wait2; - unsigned long event; - unsigned long last_active; - int line; - int type; /* PORT_ETRAX */ - int count; /* # of fd on device */ - int blocked_open; /* # of blocked opens */ - struct circ_buf xmit; - struct etrax_recv_buffer *first_recv_buffer; - struct etrax_recv_buffer *last_recv_buffer; - unsigned int recv_cnt; - unsigned int max_recv_cnt; - - struct work_struct work; - struct async_icount icount; /* error-statistics etc.*/ - struct ktermios normal_termios; - struct ktermios callout_termios; - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - - unsigned long char_time_usec; /* The time for 1 char, in usecs */ - unsigned long flush_time_usec; /* How often we should flush */ - unsigned long last_tx_active_usec; /* Last tx usec in the jiffies */ - unsigned long last_tx_active; /* Last tx time in jiffies */ - unsigned long last_rx_active_usec; /* Last rx usec in the jiffies */ - unsigned long last_rx_active; /* Last rx time in jiffies */ - - int break_detected_cnt; - int errorcode; - -#ifdef CONFIG_ETRAX_RS485 - struct serial_rs485 rs485; /* RS-485 support */ -#endif -}; - -/* this PORT is not in the standard serial.h. it's not actually used for - * anything since we only have one type of async serial-port anyway in this - * system. - */ - -#define PORT_ETRAX 1 - -/* - * Events are used to schedule things to happen at timer-interrupt - * time, instead of at rs interrupt time. - */ -#define RS_EVENT_WRITE_WAKEUP 0 - -#endif /* __KERNEL__ */ - -#endif /* !_ETRAX_SERIAL_H */ diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c deleted file mode 100644 index 57421d776329..000000000000 --- a/drivers/serial/dz.c +++ /dev/null @@ -1,955 +0,0 @@ -/* - * dz.c: Serial port driver for DECstations equipped - * with the DZ chipset. - * - * Copyright (C) 1998 Olivier A. D. Lebaillif - * - * Email: olivier.lebaillif@ifrsys.com - * - * Copyright (C) 2004, 2006, 2007 Maciej W. Rozycki - * - * [31-AUG-98] triemer - * Changed IRQ to use Harald's dec internals interrupts.h - * removed base_addr code - moving address assignment to setup.c - * Changed name of dz_init to rs_init to be consistent with tc code - * [13-NOV-98] triemer fixed code to receive characters - * after patches by harald to irq code. - * [09-JAN-99] triemer minor fix for schedule - due to removal of timeout - * field from "current" - somewhere between 2.1.121 and 2.1.131 - Qua Jun 27 15:02:26 BRT 2001 - * [27-JUN-2001] Arnaldo Carvalho de Melo - cleanups - * - * Parts (C) 1999 David Airlie, airlied@linux.ie - * [07-SEP-99] Bugfixes - * - * [06-Jan-2002] Russell King - * Converted to new serial core - */ - -#undef DEBUG_DZ - -#if defined(CONFIG_SERIAL_DZ_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include "dz.h" - - -MODULE_DESCRIPTION("DECstation DZ serial driver"); -MODULE_LICENSE("GPL"); - - -static char dz_name[] __initdata = "DECstation DZ serial driver version "; -static char dz_version[] __initdata = "1.04"; - -struct dz_port { - struct dz_mux *mux; - struct uart_port port; - unsigned int cflag; -}; - -struct dz_mux { - struct dz_port dport[DZ_NB_PORT]; - atomic_t map_guard; - atomic_t irq_guard; - int initialised; -}; - -static struct dz_mux dz_mux; - -static inline struct dz_port *to_dport(struct uart_port *uport) -{ - return container_of(uport, struct dz_port, port); -} - -/* - * ------------------------------------------------------------ - * dz_in () and dz_out () - * - * These routines are used to access the registers of the DZ - * chip, hiding relocation differences between implementation. - * ------------------------------------------------------------ - */ - -static u16 dz_in(struct dz_port *dport, unsigned offset) -{ - void __iomem *addr = dport->port.membase + offset; - - return readw(addr); -} - -static void dz_out(struct dz_port *dport, unsigned offset, u16 value) -{ - void __iomem *addr = dport->port.membase + offset; - - writew(value, addr); -} - -/* - * ------------------------------------------------------------ - * rs_stop () and rs_start () - * - * These routines are called before setting or resetting - * tty->stopped. They enable or disable transmitter interrupts, - * as necessary. - * ------------------------------------------------------------ - */ - -static void dz_stop_tx(struct uart_port *uport) -{ - struct dz_port *dport = to_dport(uport); - u16 tmp, mask = 1 << dport->port.line; - - tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ - tmp &= ~mask; /* clear the TX flag */ - dz_out(dport, DZ_TCR, tmp); -} - -static void dz_start_tx(struct uart_port *uport) -{ - struct dz_port *dport = to_dport(uport); - u16 tmp, mask = 1 << dport->port.line; - - tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ - tmp |= mask; /* set the TX flag */ - dz_out(dport, DZ_TCR, tmp); -} - -static void dz_stop_rx(struct uart_port *uport) -{ - struct dz_port *dport = to_dport(uport); - - dport->cflag &= ~DZ_RXENAB; - dz_out(dport, DZ_LPR, dport->cflag); -} - -static void dz_enable_ms(struct uart_port *uport) -{ - /* nothing to do */ -} - -/* - * ------------------------------------------------------------ - * - * Here start the interrupt handling routines. All of the following - * subroutines are declared as inline and are folded into - * dz_interrupt. They were separated out for readability's sake. - * - * Note: dz_interrupt() is a "fast" interrupt, which means that it - * runs with interrupts turned off. People who may want to modify - * dz_interrupt() should try to keep the interrupt handler as fast as - * possible. After you are done making modifications, it is not a bad - * idea to do: - * - * make drivers/serial/dz.s - * - * and look at the resulting assemble code in dz.s. - * - * ------------------------------------------------------------ - */ - -/* - * ------------------------------------------------------------ - * receive_char () - * - * This routine deals with inputs from any lines. - * ------------------------------------------------------------ - */ -static inline void dz_receive_chars(struct dz_mux *mux) -{ - struct uart_port *uport; - struct dz_port *dport = &mux->dport[0]; - struct tty_struct *tty = NULL; - struct uart_icount *icount; - int lines_rx[DZ_NB_PORT] = { [0 ... DZ_NB_PORT - 1] = 0 }; - unsigned char ch, flag; - u16 status; - int i; - - while ((status = dz_in(dport, DZ_RBUF)) & DZ_DVAL) { - dport = &mux->dport[LINE(status)]; - uport = &dport->port; - tty = uport->state->port.tty; /* point to the proper dev */ - - ch = UCHAR(status); /* grab the char */ - flag = TTY_NORMAL; - - icount = &uport->icount; - icount->rx++; - - if (unlikely(status & (DZ_OERR | DZ_FERR | DZ_PERR))) { - - /* - * There is no separate BREAK status bit, so treat - * null characters with framing errors as BREAKs; - * normally, otherwise. For this move the Framing - * Error bit to a simulated BREAK bit. - */ - if (!ch) { - status |= (status & DZ_FERR) >> - (ffs(DZ_FERR) - ffs(DZ_BREAK)); - status &= ~DZ_FERR; - } - - /* Handle SysRq/SAK & keep track of the statistics. */ - if (status & DZ_BREAK) { - icount->brk++; - if (uart_handle_break(uport)) - continue; - } else if (status & DZ_FERR) - icount->frame++; - else if (status & DZ_PERR) - icount->parity++; - if (status & DZ_OERR) - icount->overrun++; - - status &= uport->read_status_mask; - if (status & DZ_BREAK) - flag = TTY_BREAK; - else if (status & DZ_FERR) - flag = TTY_FRAME; - else if (status & DZ_PERR) - flag = TTY_PARITY; - - } - - if (uart_handle_sysrq_char(uport, ch)) - continue; - - uart_insert_char(uport, status, DZ_OERR, ch, flag); - lines_rx[LINE(status)] = 1; - } - for (i = 0; i < DZ_NB_PORT; i++) - if (lines_rx[i]) - tty_flip_buffer_push(mux->dport[i].port.state->port.tty); -} - -/* - * ------------------------------------------------------------ - * transmit_char () - * - * This routine deals with outputs to any lines. - * ------------------------------------------------------------ - */ -static inline void dz_transmit_chars(struct dz_mux *mux) -{ - struct dz_port *dport = &mux->dport[0]; - struct circ_buf *xmit; - unsigned char tmp; - u16 status; - - status = dz_in(dport, DZ_CSR); - dport = &mux->dport[LINE(status)]; - xmit = &dport->port.state->xmit; - - if (dport->port.x_char) { /* XON/XOFF chars */ - dz_out(dport, DZ_TDR, dport->port.x_char); - dport->port.icount.tx++; - dport->port.x_char = 0; - return; - } - /* If nothing to do or stopped or hardware stopped. */ - if (uart_circ_empty(xmit) || uart_tx_stopped(&dport->port)) { - spin_lock(&dport->port.lock); - dz_stop_tx(&dport->port); - spin_unlock(&dport->port.lock); - return; - } - - /* - * If something to do... (remember the dz has no output fifo, - * so we go one char at a time) :-< - */ - tmp = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (DZ_XMIT_SIZE - 1); - dz_out(dport, DZ_TDR, tmp); - dport->port.icount.tx++; - - if (uart_circ_chars_pending(xmit) < DZ_WAKEUP_CHARS) - uart_write_wakeup(&dport->port); - - /* Are we are done. */ - if (uart_circ_empty(xmit)) { - spin_lock(&dport->port.lock); - dz_stop_tx(&dport->port); - spin_unlock(&dport->port.lock); - } -} - -/* - * ------------------------------------------------------------ - * check_modem_status() - * - * DS 3100 & 5100: Only valid for the MODEM line, duh! - * DS 5000/200: Valid for the MODEM and PRINTER line. - * ------------------------------------------------------------ - */ -static inline void check_modem_status(struct dz_port *dport) -{ - /* - * FIXME: - * 1. No status change interrupt; use a timer. - * 2. Handle the 3100/5000 as appropriate. --macro - */ - u16 status; - - /* If not the modem line just return. */ - if (dport->port.line != DZ_MODEM) - return; - - status = dz_in(dport, DZ_MSR); - - /* it's easy, since DSR2 is the only bit in the register */ - if (status) - dport->port.icount.dsr++; -} - -/* - * ------------------------------------------------------------ - * dz_interrupt () - * - * this is the main interrupt routine for the DZ chip. - * It deals with the multiple ports. - * ------------------------------------------------------------ - */ -static irqreturn_t dz_interrupt(int irq, void *dev_id) -{ - struct dz_mux *mux = dev_id; - struct dz_port *dport = &mux->dport[0]; - u16 status; - - /* get the reason why we just got an irq */ - status = dz_in(dport, DZ_CSR); - - if ((status & (DZ_RDONE | DZ_RIE)) == (DZ_RDONE | DZ_RIE)) - dz_receive_chars(mux); - - if ((status & (DZ_TRDY | DZ_TIE)) == (DZ_TRDY | DZ_TIE)) - dz_transmit_chars(mux); - - return IRQ_HANDLED; -} - -/* - * ------------------------------------------------------------------- - * Here ends the DZ interrupt routines. - * ------------------------------------------------------------------- - */ - -static unsigned int dz_get_mctrl(struct uart_port *uport) -{ - /* - * FIXME: Handle the 3100/5000 as appropriate. --macro - */ - struct dz_port *dport = to_dport(uport); - unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; - - if (dport->port.line == DZ_MODEM) { - if (dz_in(dport, DZ_MSR) & DZ_MODEM_DSR) - mctrl &= ~TIOCM_DSR; - } - - return mctrl; -} - -static void dz_set_mctrl(struct uart_port *uport, unsigned int mctrl) -{ - /* - * FIXME: Handle the 3100/5000 as appropriate. --macro - */ - struct dz_port *dport = to_dport(uport); - u16 tmp; - - if (dport->port.line == DZ_MODEM) { - tmp = dz_in(dport, DZ_TCR); - if (mctrl & TIOCM_DTR) - tmp &= ~DZ_MODEM_DTR; - else - tmp |= DZ_MODEM_DTR; - dz_out(dport, DZ_TCR, tmp); - } -} - -/* - * ------------------------------------------------------------------- - * startup () - * - * various initialization tasks - * ------------------------------------------------------------------- - */ -static int dz_startup(struct uart_port *uport) -{ - struct dz_port *dport = to_dport(uport); - struct dz_mux *mux = dport->mux; - unsigned long flags; - int irq_guard; - int ret; - u16 tmp; - - irq_guard = atomic_add_return(1, &mux->irq_guard); - if (irq_guard != 1) - return 0; - - ret = request_irq(dport->port.irq, dz_interrupt, - IRQF_SHARED, "dz", mux); - if (ret) { - atomic_add(-1, &mux->irq_guard); - printk(KERN_ERR "dz: Cannot get IRQ %d!\n", dport->port.irq); - return ret; - } - - spin_lock_irqsave(&dport->port.lock, flags); - - /* Enable interrupts. */ - tmp = dz_in(dport, DZ_CSR); - tmp |= DZ_RIE | DZ_TIE; - dz_out(dport, DZ_CSR, tmp); - - spin_unlock_irqrestore(&dport->port.lock, flags); - - return 0; -} - -/* - * ------------------------------------------------------------------- - * shutdown () - * - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - * ------------------------------------------------------------------- - */ -static void dz_shutdown(struct uart_port *uport) -{ - struct dz_port *dport = to_dport(uport); - struct dz_mux *mux = dport->mux; - unsigned long flags; - int irq_guard; - u16 tmp; - - spin_lock_irqsave(&dport->port.lock, flags); - dz_stop_tx(&dport->port); - spin_unlock_irqrestore(&dport->port.lock, flags); - - irq_guard = atomic_add_return(-1, &mux->irq_guard); - if (!irq_guard) { - /* Disable interrupts. */ - tmp = dz_in(dport, DZ_CSR); - tmp &= ~(DZ_RIE | DZ_TIE); - dz_out(dport, DZ_CSR, tmp); - - free_irq(dport->port.irq, mux); - } -} - -/* - * ------------------------------------------------------------------- - * dz_tx_empty() -- get the transmitter empty status - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - * ------------------------------------------------------------------- - */ -static unsigned int dz_tx_empty(struct uart_port *uport) -{ - struct dz_port *dport = to_dport(uport); - unsigned short tmp, mask = 1 << dport->port.line; - - tmp = dz_in(dport, DZ_TCR); - tmp &= mask; - - return tmp ? 0 : TIOCSER_TEMT; -} - -static void dz_break_ctl(struct uart_port *uport, int break_state) -{ - /* - * FIXME: Can't access BREAK bits in TDR easily; - * reuse the code for polled TX. --macro - */ - struct dz_port *dport = to_dport(uport); - unsigned long flags; - unsigned short tmp, mask = 1 << dport->port.line; - - spin_lock_irqsave(&uport->lock, flags); - tmp = dz_in(dport, DZ_TCR); - if (break_state) - tmp |= mask; - else - tmp &= ~mask; - dz_out(dport, DZ_TCR, tmp); - spin_unlock_irqrestore(&uport->lock, flags); -} - -static int dz_encode_baud_rate(unsigned int baud) -{ - switch (baud) { - case 50: - return DZ_B50; - case 75: - return DZ_B75; - case 110: - return DZ_B110; - case 134: - return DZ_B134; - case 150: - return DZ_B150; - case 300: - return DZ_B300; - case 600: - return DZ_B600; - case 1200: - return DZ_B1200; - case 1800: - return DZ_B1800; - case 2000: - return DZ_B2000; - case 2400: - return DZ_B2400; - case 3600: - return DZ_B3600; - case 4800: - return DZ_B4800; - case 7200: - return DZ_B7200; - case 9600: - return DZ_B9600; - default: - return -1; - } -} - - -static void dz_reset(struct dz_port *dport) -{ - struct dz_mux *mux = dport->mux; - - if (mux->initialised) - return; - - dz_out(dport, DZ_CSR, DZ_CLR); - while (dz_in(dport, DZ_CSR) & DZ_CLR); - iob(); - - /* Enable scanning. */ - dz_out(dport, DZ_CSR, DZ_MSE); - - mux->initialised = 1; -} - -static void dz_set_termios(struct uart_port *uport, struct ktermios *termios, - struct ktermios *old_termios) -{ - struct dz_port *dport = to_dport(uport); - unsigned long flags; - unsigned int cflag, baud; - int bflag; - - cflag = dport->port.line; - - switch (termios->c_cflag & CSIZE) { - case CS5: - cflag |= DZ_CS5; - break; - case CS6: - cflag |= DZ_CS6; - break; - case CS7: - cflag |= DZ_CS7; - break; - case CS8: - default: - cflag |= DZ_CS8; - } - - if (termios->c_cflag & CSTOPB) - cflag |= DZ_CSTOPB; - if (termios->c_cflag & PARENB) - cflag |= DZ_PARENB; - if (termios->c_cflag & PARODD) - cflag |= DZ_PARODD; - - baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600); - bflag = dz_encode_baud_rate(baud); - if (bflag < 0) { /* Try to keep unchanged. */ - baud = uart_get_baud_rate(uport, old_termios, NULL, 50, 9600); - bflag = dz_encode_baud_rate(baud); - if (bflag < 0) { /* Resort to 9600. */ - baud = 9600; - bflag = DZ_B9600; - } - tty_termios_encode_baud_rate(termios, baud, baud); - } - cflag |= bflag; - - if (termios->c_cflag & CREAD) - cflag |= DZ_RXENAB; - - spin_lock_irqsave(&dport->port.lock, flags); - - uart_update_timeout(uport, termios->c_cflag, baud); - - dz_out(dport, DZ_LPR, cflag); - dport->cflag = cflag; - - /* setup accept flag */ - dport->port.read_status_mask = DZ_OERR; - if (termios->c_iflag & INPCK) - dport->port.read_status_mask |= DZ_FERR | DZ_PERR; - if (termios->c_iflag & (BRKINT | PARMRK)) - dport->port.read_status_mask |= DZ_BREAK; - - /* characters to ignore */ - uport->ignore_status_mask = 0; - if ((termios->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK)) - dport->port.ignore_status_mask |= DZ_OERR; - if (termios->c_iflag & IGNPAR) - dport->port.ignore_status_mask |= DZ_FERR | DZ_PERR; - if (termios->c_iflag & IGNBRK) - dport->port.ignore_status_mask |= DZ_BREAK; - - spin_unlock_irqrestore(&dport->port.lock, flags); -} - -/* - * Hack alert! - * Required solely so that the initial PROM-based console - * works undisturbed in parallel with this one. - */ -static void dz_pm(struct uart_port *uport, unsigned int state, - unsigned int oldstate) -{ - struct dz_port *dport = to_dport(uport); - unsigned long flags; - - spin_lock_irqsave(&dport->port.lock, flags); - if (state < 3) - dz_start_tx(&dport->port); - else - dz_stop_tx(&dport->port); - spin_unlock_irqrestore(&dport->port.lock, flags); -} - - -static const char *dz_type(struct uart_port *uport) -{ - return "DZ"; -} - -static void dz_release_port(struct uart_port *uport) -{ - struct dz_mux *mux = to_dport(uport)->mux; - int map_guard; - - iounmap(uport->membase); - uport->membase = NULL; - - map_guard = atomic_add_return(-1, &mux->map_guard); - if (!map_guard) - release_mem_region(uport->mapbase, dec_kn_slot_size); -} - -static int dz_map_port(struct uart_port *uport) -{ - if (!uport->membase) - uport->membase = ioremap_nocache(uport->mapbase, - dec_kn_slot_size); - if (!uport->membase) { - printk(KERN_ERR "dz: Cannot map MMIO\n"); - return -ENOMEM; - } - return 0; -} - -static int dz_request_port(struct uart_port *uport) -{ - struct dz_mux *mux = to_dport(uport)->mux; - int map_guard; - int ret; - - map_guard = atomic_add_return(1, &mux->map_guard); - if (map_guard == 1) { - if (!request_mem_region(uport->mapbase, dec_kn_slot_size, - "dz")) { - atomic_add(-1, &mux->map_guard); - printk(KERN_ERR - "dz: Unable to reserve MMIO resource\n"); - return -EBUSY; - } - } - ret = dz_map_port(uport); - if (ret) { - map_guard = atomic_add_return(-1, &mux->map_guard); - if (!map_guard) - release_mem_region(uport->mapbase, dec_kn_slot_size); - return ret; - } - return 0; -} - -static void dz_config_port(struct uart_port *uport, int flags) -{ - struct dz_port *dport = to_dport(uport); - - if (flags & UART_CONFIG_TYPE) { - if (dz_request_port(uport)) - return; - - uport->type = PORT_DZ; - - dz_reset(dport); - } -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - */ -static int dz_verify_port(struct uart_port *uport, struct serial_struct *ser) -{ - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_DZ) - ret = -EINVAL; - if (ser->irq != uport->irq) - ret = -EINVAL; - return ret; -} - -static struct uart_ops dz_ops = { - .tx_empty = dz_tx_empty, - .get_mctrl = dz_get_mctrl, - .set_mctrl = dz_set_mctrl, - .stop_tx = dz_stop_tx, - .start_tx = dz_start_tx, - .stop_rx = dz_stop_rx, - .enable_ms = dz_enable_ms, - .break_ctl = dz_break_ctl, - .startup = dz_startup, - .shutdown = dz_shutdown, - .set_termios = dz_set_termios, - .pm = dz_pm, - .type = dz_type, - .release_port = dz_release_port, - .request_port = dz_request_port, - .config_port = dz_config_port, - .verify_port = dz_verify_port, -}; - -static void __init dz_init_ports(void) -{ - static int first = 1; - unsigned long base; - int line; - - if (!first) - return; - first = 0; - - if (mips_machtype == MACH_DS23100 || mips_machtype == MACH_DS5100) - base = dec_kn_slot_base + KN01_DZ11; - else - base = dec_kn_slot_base + KN02_DZ11; - - for (line = 0; line < DZ_NB_PORT; line++) { - struct dz_port *dport = &dz_mux.dport[line]; - struct uart_port *uport = &dport->port; - - dport->mux = &dz_mux; - - uport->irq = dec_interrupt[DEC_IRQ_DZ11]; - uport->fifosize = 1; - uport->iotype = UPIO_MEM; - uport->flags = UPF_BOOT_AUTOCONF; - uport->ops = &dz_ops; - uport->line = line; - uport->mapbase = base; - } -} - -#ifdef CONFIG_SERIAL_DZ_CONSOLE -/* - * ------------------------------------------------------------------- - * dz_console_putchar() -- transmit a character - * - * Polled transmission. This is tricky. We need to mask transmit - * interrupts so that they do not interfere, enable the transmitter - * for the line requested and then wait till the transmit scanner - * requests data for this line. But it may request data for another - * line first, in which case we have to disable its transmitter and - * repeat waiting till our line pops up. Only then the character may - * be transmitted. Finally, the state of the transmitter mask is - * restored. Welcome to the world of PDP-11! - * ------------------------------------------------------------------- - */ -static void dz_console_putchar(struct uart_port *uport, int ch) -{ - struct dz_port *dport = to_dport(uport); - unsigned long flags; - unsigned short csr, tcr, trdy, mask; - int loops = 10000; - - spin_lock_irqsave(&dport->port.lock, flags); - csr = dz_in(dport, DZ_CSR); - dz_out(dport, DZ_CSR, csr & ~DZ_TIE); - tcr = dz_in(dport, DZ_TCR); - tcr |= 1 << dport->port.line; - mask = tcr; - dz_out(dport, DZ_TCR, mask); - iob(); - spin_unlock_irqrestore(&dport->port.lock, flags); - - do { - trdy = dz_in(dport, DZ_CSR); - if (!(trdy & DZ_TRDY)) - continue; - trdy = (trdy & DZ_TLINE) >> 8; - if (trdy == dport->port.line) - break; - mask &= ~(1 << trdy); - dz_out(dport, DZ_TCR, mask); - iob(); - udelay(2); - } while (--loops); - - if (loops) /* Cannot send otherwise. */ - dz_out(dport, DZ_TDR, ch); - - dz_out(dport, DZ_TCR, tcr); - dz_out(dport, DZ_CSR, csr); -} - -/* - * ------------------------------------------------------------------- - * dz_console_print () - * - * dz_console_print is registered for printk. - * The console must be locked when we get here. - * ------------------------------------------------------------------- - */ -static void dz_console_print(struct console *co, - const char *str, - unsigned int count) -{ - struct dz_port *dport = &dz_mux.dport[co->index]; -#ifdef DEBUG_DZ - prom_printf((char *) str); -#endif - uart_console_write(&dport->port, str, count, dz_console_putchar); -} - -static int __init dz_console_setup(struct console *co, char *options) -{ - struct dz_port *dport = &dz_mux.dport[co->index]; - struct uart_port *uport = &dport->port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - int ret; - - ret = dz_map_port(uport); - if (ret) - return ret; - - spin_lock_init(&dport->port.lock); /* For dz_pm(). */ - - dz_reset(dport); - dz_pm(uport, 0, -1); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&dport->port, co, baud, parity, bits, flow); -} - -static struct uart_driver dz_reg; -static struct console dz_console = { - .name = "ttyS", - .write = dz_console_print, - .device = uart_console_device, - .setup = dz_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &dz_reg, -}; - -static int __init dz_serial_console_init(void) -{ - if (!IOASIC) { - dz_init_ports(); - register_console(&dz_console); - return 0; - } else - return -ENXIO; -} - -console_initcall(dz_serial_console_init); - -#define SERIAL_DZ_CONSOLE &dz_console -#else -#define SERIAL_DZ_CONSOLE NULL -#endif /* CONFIG_SERIAL_DZ_CONSOLE */ - -static struct uart_driver dz_reg = { - .owner = THIS_MODULE, - .driver_name = "serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = DZ_NB_PORT, - .cons = SERIAL_DZ_CONSOLE, -}; - -static int __init dz_init(void) -{ - int ret, i; - - if (IOASIC) - return -ENXIO; - - printk("%s%s\n", dz_name, dz_version); - - dz_init_ports(); - - ret = uart_register_driver(&dz_reg); - if (ret) - return ret; - - for (i = 0; i < DZ_NB_PORT; i++) - uart_add_one_port(&dz_reg, &dz_mux.dport[i].port); - - return 0; -} - -module_init(dz_init); diff --git a/drivers/serial/dz.h b/drivers/serial/dz.h deleted file mode 100644 index faf169ed27b3..000000000000 --- a/drivers/serial/dz.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * dz.h: Serial port driver for DECstations equipped - * with the DZ chipset. - * - * Copyright (C) 1998 Olivier A. D. Lebaillif - * - * Email: olivier.lebaillif@ifrsys.com - * - * Copyright (C) 2004, 2006 Maciej W. Rozycki - */ -#ifndef DZ_SERIAL_H -#define DZ_SERIAL_H - -/* - * Definitions for the Control and Status Register. - */ -#define DZ_TRDY 0x8000 /* Transmitter empty */ -#define DZ_TIE 0x4000 /* Transmitter Interrupt Enbl */ -#define DZ_TLINE 0x0300 /* Transmitter Line Number */ -#define DZ_RDONE 0x0080 /* Receiver data ready */ -#define DZ_RIE 0x0040 /* Receive Interrupt Enable */ -#define DZ_MSE 0x0020 /* Master Scan Enable */ -#define DZ_CLR 0x0010 /* Master reset */ -#define DZ_MAINT 0x0008 /* Loop Back Mode */ - -/* - * Definitions for the Receiver Buffer Register. - */ -#define DZ_RBUF_MASK 0x00FF /* Data Mask */ -#define DZ_LINE_MASK 0x0300 /* Line Mask */ -#define DZ_DVAL 0x8000 /* Valid Data indicator */ -#define DZ_OERR 0x4000 /* Overrun error indicator */ -#define DZ_FERR 0x2000 /* Frame error indicator */ -#define DZ_PERR 0x1000 /* Parity error indicator */ - -#define DZ_BREAK 0x0800 /* BREAK event software flag */ - -#define LINE(x) ((x & DZ_LINE_MASK) >> 8) /* Get the line number - from the input buffer */ -#define UCHAR(x) ((unsigned char)(x & DZ_RBUF_MASK)) - -/* - * Definitions for the Transmit Control Register. - */ -#define DZ_LINE_KEYBOARD 0x0001 -#define DZ_LINE_MOUSE 0x0002 -#define DZ_LINE_MODEM 0x0004 -#define DZ_LINE_PRINTER 0x0008 - -#define DZ_MODEM_RTS 0x0800 /* RTS for the modem line (2) */ -#define DZ_MODEM_DTR 0x0400 /* DTR for the modem line (2) */ -#define DZ_PRINT_RTS 0x0200 /* RTS for the prntr line (3) */ -#define DZ_PRINT_DTR 0x0100 /* DTR for the prntr line (3) */ -#define DZ_LNENB 0x000f /* Transmitter Line Enable */ - -/* - * Definitions for the Modem Status Register. - */ -#define DZ_MODEM_RI 0x0800 /* RI for the modem line (2) */ -#define DZ_MODEM_CD 0x0400 /* CD for the modem line (2) */ -#define DZ_MODEM_DSR 0x0200 /* DSR for the modem line (2) */ -#define DZ_MODEM_CTS 0x0100 /* CTS for the modem line (2) */ -#define DZ_PRINT_RI 0x0008 /* RI for the printer line (3) */ -#define DZ_PRINT_CD 0x0004 /* CD for the printer line (3) */ -#define DZ_PRINT_DSR 0x0002 /* DSR for the prntr line (3) */ -#define DZ_PRINT_CTS 0x0001 /* CTS for the prntr line (3) */ - -/* - * Definitions for the Transmit Data Register. - */ -#define DZ_BRK0 0x0100 /* Break assertion for line 0 */ -#define DZ_BRK1 0x0200 /* Break assertion for line 1 */ -#define DZ_BRK2 0x0400 /* Break assertion for line 2 */ -#define DZ_BRK3 0x0800 /* Break assertion for line 3 */ - -/* - * Definitions for the Line Parameter Register. - */ -#define DZ_KEYBOARD 0x0000 /* line 0 = keyboard */ -#define DZ_MOUSE 0x0001 /* line 1 = mouse */ -#define DZ_MODEM 0x0002 /* line 2 = modem */ -#define DZ_PRINTER 0x0003 /* line 3 = printer */ - -#define DZ_CSIZE 0x0018 /* Number of bits per byte (mask) */ -#define DZ_CS5 0x0000 /* 5 bits per byte */ -#define DZ_CS6 0x0008 /* 6 bits per byte */ -#define DZ_CS7 0x0010 /* 7 bits per byte */ -#define DZ_CS8 0x0018 /* 8 bits per byte */ - -#define DZ_CSTOPB 0x0020 /* 2 stop bits instead of one */ - -#define DZ_PARENB 0x0040 /* Parity enable */ -#define DZ_PARODD 0x0080 /* Odd parity instead of even */ - -#define DZ_CBAUD 0x0E00 /* Baud Rate (mask) */ -#define DZ_B50 0x0000 -#define DZ_B75 0x0100 -#define DZ_B110 0x0200 -#define DZ_B134 0x0300 -#define DZ_B150 0x0400 -#define DZ_B300 0x0500 -#define DZ_B600 0x0600 -#define DZ_B1200 0x0700 -#define DZ_B1800 0x0800 -#define DZ_B2000 0x0900 -#define DZ_B2400 0x0A00 -#define DZ_B3600 0x0B00 -#define DZ_B4800 0x0C00 -#define DZ_B7200 0x0D00 -#define DZ_B9600 0x0E00 - -#define DZ_RXENAB 0x1000 /* Receiver Enable */ - -/* - * Addresses for the DZ registers - */ -#define DZ_CSR 0x00 /* Control and Status Register */ -#define DZ_RBUF 0x08 /* Receive Buffer */ -#define DZ_LPR 0x08 /* Line Parameters Register */ -#define DZ_TCR 0x10 /* Transmitter Control Register */ -#define DZ_MSR 0x18 /* Modem Status Register */ -#define DZ_TDR 0x18 /* Transmit Data Register */ - -#define DZ_NB_PORT 4 - -#define DZ_XMIT_SIZE 4096 /* buffer size */ -#define DZ_WAKEUP_CHARS DZ_XMIT_SIZE/4 - -#endif /* DZ_SERIAL_H */ diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c deleted file mode 100644 index 53a468227056..000000000000 --- a/drivers/serial/icom.c +++ /dev/null @@ -1,1658 +0,0 @@ -/* - * icom.c - * - * Copyright (C) 2001 IBM Corporation. All rights reserved. - * - * Serial device driver. - * - * Based on code from serial.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#define SERIAL_DO_RESTART -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "icom.h" - -/*#define ICOM_TRACE enable port trace capabilities */ - -#define ICOM_DRIVER_NAME "icom" -#define ICOM_VERSION_STR "1.3.1" -#define NR_PORTS 128 -#define ICOM_PORT ((struct icom_port *)port) -#define to_icom_adapter(d) container_of(d, struct icom_adapter, kref) - -static const struct pci_device_id icom_pci_table[] = { - { - .vendor = PCI_VENDOR_ID_IBM, - .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = ADAPTER_V1, - }, - { - .vendor = PCI_VENDOR_ID_IBM, - .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, - .subvendor = PCI_VENDOR_ID_IBM, - .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX, - .driver_data = ADAPTER_V2, - }, - { - .vendor = PCI_VENDOR_ID_IBM, - .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, - .subvendor = PCI_VENDOR_ID_IBM, - .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM, - .driver_data = ADAPTER_V2, - }, - { - .vendor = PCI_VENDOR_ID_IBM, - .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, - .subvendor = PCI_VENDOR_ID_IBM, - .subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL, - .driver_data = ADAPTER_V2, - }, - { - .vendor = PCI_VENDOR_ID_IBM, - .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, - .subvendor = PCI_VENDOR_ID_IBM, - .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE, - .driver_data = ADAPTER_V2, - }, - {} -}; - -struct lookup_proc_table start_proc[4] = { - {NULL, ICOM_CONTROL_START_A}, - {NULL, ICOM_CONTROL_START_B}, - {NULL, ICOM_CONTROL_START_C}, - {NULL, ICOM_CONTROL_START_D} -}; - - -struct lookup_proc_table stop_proc[4] = { - {NULL, ICOM_CONTROL_STOP_A}, - {NULL, ICOM_CONTROL_STOP_B}, - {NULL, ICOM_CONTROL_STOP_C}, - {NULL, ICOM_CONTROL_STOP_D} -}; - -struct lookup_int_table int_mask_tbl[4] = { - {NULL, ICOM_INT_MASK_PRC_A}, - {NULL, ICOM_INT_MASK_PRC_B}, - {NULL, ICOM_INT_MASK_PRC_C}, - {NULL, ICOM_INT_MASK_PRC_D}, -}; - - -MODULE_DEVICE_TABLE(pci, icom_pci_table); - -static LIST_HEAD(icom_adapter_head); - -/* spinlock for adapter initialization and changing adapter operations */ -static spinlock_t icom_lock; - -#ifdef ICOM_TRACE -static inline void trace(struct icom_port *icom_port, char *trace_pt, - unsigned long trace_data) -{ - dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n", - icom_port->port, trace_pt, trace_data); -} -#else -static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {}; -#endif -static void icom_kref_release(struct kref *kref); - -static void free_port_memory(struct icom_port *icom_port) -{ - struct pci_dev *dev = icom_port->adapter->pci_dev; - - trace(icom_port, "RET_PORT_MEM", 0); - if (icom_port->recv_buf) { - pci_free_consistent(dev, 4096, icom_port->recv_buf, - icom_port->recv_buf_pci); - icom_port->recv_buf = NULL; - } - if (icom_port->xmit_buf) { - pci_free_consistent(dev, 4096, icom_port->xmit_buf, - icom_port->xmit_buf_pci); - icom_port->xmit_buf = NULL; - } - if (icom_port->statStg) { - pci_free_consistent(dev, 4096, icom_port->statStg, - icom_port->statStg_pci); - icom_port->statStg = NULL; - } - - if (icom_port->xmitRestart) { - pci_free_consistent(dev, 4096, icom_port->xmitRestart, - icom_port->xmitRestart_pci); - icom_port->xmitRestart = NULL; - } -} - -static int __devinit get_port_memory(struct icom_port *icom_port) -{ - int index; - unsigned long stgAddr; - unsigned long startStgAddr; - unsigned long offset; - struct pci_dev *dev = icom_port->adapter->pci_dev; - - icom_port->xmit_buf = - pci_alloc_consistent(dev, 4096, &icom_port->xmit_buf_pci); - if (!icom_port->xmit_buf) { - dev_err(&dev->dev, "Can not allocate Transmit buffer\n"); - return -ENOMEM; - } - - trace(icom_port, "GET_PORT_MEM", - (unsigned long) icom_port->xmit_buf); - - icom_port->recv_buf = - pci_alloc_consistent(dev, 4096, &icom_port->recv_buf_pci); - if (!icom_port->recv_buf) { - dev_err(&dev->dev, "Can not allocate Receive buffer\n"); - free_port_memory(icom_port); - return -ENOMEM; - } - trace(icom_port, "GET_PORT_MEM", - (unsigned long) icom_port->recv_buf); - - icom_port->statStg = - pci_alloc_consistent(dev, 4096, &icom_port->statStg_pci); - if (!icom_port->statStg) { - dev_err(&dev->dev, "Can not allocate Status buffer\n"); - free_port_memory(icom_port); - return -ENOMEM; - } - trace(icom_port, "GET_PORT_MEM", - (unsigned long) icom_port->statStg); - - icom_port->xmitRestart = - pci_alloc_consistent(dev, 4096, &icom_port->xmitRestart_pci); - if (!icom_port->xmitRestart) { - dev_err(&dev->dev, - "Can not allocate xmit Restart buffer\n"); - free_port_memory(icom_port); - return -ENOMEM; - } - - memset(icom_port->statStg, 0, 4096); - - /* FODs: Frame Out Descriptor Queue, this is a FIFO queue that - indicates that frames are to be transmitted - */ - - stgAddr = (unsigned long) icom_port->statStg; - for (index = 0; index < NUM_XBUFFS; index++) { - trace(icom_port, "FOD_ADDR", stgAddr); - stgAddr = stgAddr + sizeof(icom_port->statStg->xmit[0]); - if (index < (NUM_XBUFFS - 1)) { - memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); - icom_port->statStg->xmit[index].leLengthASD = - (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); - trace(icom_port, "FOD_ADDR", stgAddr); - trace(icom_port, "FOD_XBUFF", - (unsigned long) icom_port->xmit_buf); - icom_port->statStg->xmit[index].leBuffer = - cpu_to_le32(icom_port->xmit_buf_pci); - } else if (index == (NUM_XBUFFS - 1)) { - memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); - icom_port->statStg->xmit[index].leLengthASD = - (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); - trace(icom_port, "FOD_XBUFF", - (unsigned long) icom_port->xmit_buf); - icom_port->statStg->xmit[index].leBuffer = - cpu_to_le32(icom_port->xmit_buf_pci); - } else { - memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); - } - } - /* FIDs */ - startStgAddr = stgAddr; - - /* fill in every entry, even if no buffer */ - for (index = 0; index < NUM_RBUFFS; index++) { - trace(icom_port, "FID_ADDR", stgAddr); - stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]); - icom_port->statStg->rcv[index].leLength = 0; - icom_port->statStg->rcv[index].WorkingLength = - (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); - if (index < (NUM_RBUFFS - 1) ) { - offset = stgAddr - (unsigned long) icom_port->statStg; - icom_port->statStg->rcv[index].leNext = - cpu_to_le32(icom_port-> statStg_pci + offset); - trace(icom_port, "FID_RBUFF", - (unsigned long) icom_port->recv_buf); - icom_port->statStg->rcv[index].leBuffer = - cpu_to_le32(icom_port->recv_buf_pci); - } else if (index == (NUM_RBUFFS -1) ) { - offset = startStgAddr - (unsigned long) icom_port->statStg; - icom_port->statStg->rcv[index].leNext = - cpu_to_le32(icom_port-> statStg_pci + offset); - trace(icom_port, "FID_RBUFF", - (unsigned long) icom_port->recv_buf + 2048); - icom_port->statStg->rcv[index].leBuffer = - cpu_to_le32(icom_port->recv_buf_pci + 2048); - } else { - icom_port->statStg->rcv[index].leNext = 0; - icom_port->statStg->rcv[index].leBuffer = 0; - } - } - - return 0; -} - -static void stop_processor(struct icom_port *icom_port) -{ - unsigned long temp; - unsigned long flags; - int port; - - spin_lock_irqsave(&icom_lock, flags); - - port = icom_port->port; - if (port == 0 || port == 1) - stop_proc[port].global_control_reg = &icom_port->global_reg->control; - else - stop_proc[port].global_control_reg = &icom_port->global_reg->control_2; - - - if (port < 4) { - temp = readl(stop_proc[port].global_control_reg); - temp = - (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; - writel(temp, stop_proc[port].global_control_reg); - - /* write flush */ - readl(stop_proc[port].global_control_reg); - } else { - dev_err(&icom_port->adapter->pci_dev->dev, - "Invalid port assignment\n"); - } - - spin_unlock_irqrestore(&icom_lock, flags); -} - -static void start_processor(struct icom_port *icom_port) -{ - unsigned long temp; - unsigned long flags; - int port; - - spin_lock_irqsave(&icom_lock, flags); - - port = icom_port->port; - if (port == 0 || port == 1) - start_proc[port].global_control_reg = &icom_port->global_reg->control; - else - start_proc[port].global_control_reg = &icom_port->global_reg->control_2; - if (port < 4) { - temp = readl(start_proc[port].global_control_reg); - temp = - (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; - writel(temp, start_proc[port].global_control_reg); - - /* write flush */ - readl(start_proc[port].global_control_reg); - } else { - dev_err(&icom_port->adapter->pci_dev->dev, - "Invalid port assignment\n"); - } - - spin_unlock_irqrestore(&icom_lock, flags); -} - -static void load_code(struct icom_port *icom_port) -{ - const struct firmware *fw; - char __iomem *iram_ptr; - int index; - int status = 0; - void __iomem *dram_ptr = icom_port->dram; - dma_addr_t temp_pci; - unsigned char *new_page = NULL; - unsigned char cable_id = NO_CABLE; - struct pci_dev *dev = icom_port->adapter->pci_dev; - - /* Clear out any pending interrupts */ - writew(0x3FFF, icom_port->int_reg); - - trace(icom_port, "CLEAR_INTERRUPTS", 0); - - /* Stop processor */ - stop_processor(icom_port); - - /* Zero out DRAM */ - memset_io(dram_ptr, 0, 512); - - /* Load Call Setup into Adapter */ - if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) { - dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n"); - status = -1; - goto load_code_exit; - } - - if (fw->size > ICOM_DCE_IRAM_OFFSET) { - dev_err(&dev->dev, "Invalid firmware image for icom_call_setup.bin found.\n"); - release_firmware(fw); - status = -1; - goto load_code_exit; - } - - iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET; - for (index = 0; index < fw->size; index++) - writeb(fw->data[index], &iram_ptr[index]); - - release_firmware(fw); - - /* Load Resident DCE portion of Adapter */ - if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) { - dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n"); - status = -1; - goto load_code_exit; - } - - if (fw->size > ICOM_IRAM_SIZE) { - dev_err(&dev->dev, "Invalid firmware image for icom_res_dce.bin found.\n"); - release_firmware(fw); - status = -1; - goto load_code_exit; - } - - iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET; - for (index = ICOM_DCE_IRAM_OFFSET; index < fw->size; index++) - writeb(fw->data[index], &iram_ptr[index]); - - release_firmware(fw); - - /* Set Hardware level */ - if (icom_port->adapter->version == ADAPTER_V2) - writeb(V2_HARDWARE, &(icom_port->dram->misc_flags)); - - /* Start the processor in Adapter */ - start_processor(icom_port); - - writeb((HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL), - &(icom_port->dram->HDLCConfigReg)); - writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */ - writeb(0x00, &(icom_port->dram->CmdReg)); - writeb(0x10, &(icom_port->dram->async_config3)); - writeb((ICOM_ACFG_DRIVE1 | ICOM_ACFG_NO_PARITY | ICOM_ACFG_8BPC | - ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2)); - - /*Set up data in icom DRAM to indicate where personality - *code is located and its length. - */ - new_page = pci_alloc_consistent(dev, 4096, &temp_pci); - - if (!new_page) { - dev_err(&dev->dev, "Can not allocate DMA buffer\n"); - status = -1; - goto load_code_exit; - } - - if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) { - dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n"); - status = -1; - goto load_code_exit; - } - - if (fw->size > ICOM_DCE_IRAM_OFFSET) { - dev_err(&dev->dev, "Invalid firmware image for icom_asc.bin found.\n"); - release_firmware(fw); - status = -1; - goto load_code_exit; - } - - for (index = 0; index < fw->size; index++) - new_page[index] = fw->data[index]; - - release_firmware(fw); - - writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length); - writel(temp_pci, &icom_port->dram->mac_load_addr); - - /*Setting the syncReg to 0x80 causes adapter to start downloading - the personality code into adapter instruction RAM. - Once code is loaded, it will begin executing and, based on - information provided above, will start DMAing data from - shared memory to adapter DRAM. - */ - /* the wait loop below verifies this write operation has been done - and processed - */ - writeb(START_DOWNLOAD, &icom_port->dram->sync); - - /* Wait max 1 Sec for data download and processor to start */ - for (index = 0; index < 10; index++) { - msleep(100); - if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE) - break; - } - - if (index == 10) - status = -1; - - /* - * check Cable ID - */ - cable_id = readb(&icom_port->dram->cable_id); - - if (cable_id & ICOM_CABLE_ID_VALID) { - /* Get cable ID into the lower 4 bits (standard form) */ - cable_id = (cable_id & ICOM_CABLE_ID_MASK) >> 4; - icom_port->cable_id = cable_id; - } else { - dev_err(&dev->dev,"Invalid or no cable attached\n"); - icom_port->cable_id = NO_CABLE; - } - - load_code_exit: - - if (status != 0) { - /* Clear out any pending interrupts */ - writew(0x3FFF, icom_port->int_reg); - - /* Turn off port */ - writeb(ICOM_DISABLE, &(icom_port->dram->disable)); - - /* Stop processor */ - stop_processor(icom_port); - - dev_err(&icom_port->adapter->pci_dev->dev,"Port not opertional\n"); - } - - if (new_page != NULL) - pci_free_consistent(dev, 4096, new_page, temp_pci); -} - -static int startup(struct icom_port *icom_port) -{ - unsigned long temp; - unsigned char cable_id, raw_cable_id; - unsigned long flags; - int port; - - trace(icom_port, "STARTUP", 0); - - if (!icom_port->dram) { - /* should NEVER be NULL */ - dev_err(&icom_port->adapter->pci_dev->dev, - "Unusable Port, port configuration missing\n"); - return -ENODEV; - } - - /* - * check Cable ID - */ - raw_cable_id = readb(&icom_port->dram->cable_id); - trace(icom_port, "CABLE_ID", raw_cable_id); - - /* Get cable ID into the lower 4 bits (standard form) */ - cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; - - /* Check for valid Cable ID */ - if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || - (cable_id != icom_port->cable_id)) { - - /* reload adapter code, pick up any potential changes in cable id */ - load_code(icom_port); - - /* still no sign of cable, error out */ - raw_cable_id = readb(&icom_port->dram->cable_id); - cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; - if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || - (icom_port->cable_id == NO_CABLE)) - return -EIO; - } - - /* - * Finally, clear and enable interrupts - */ - spin_lock_irqsave(&icom_lock, flags); - port = icom_port->port; - if (port == 0 || port == 1) - int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; - else - int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; - - if (port == 0 || port == 2) - writew(0x00FF, icom_port->int_reg); - else - writew(0x3F00, icom_port->int_reg); - if (port < 4) { - temp = readl(int_mask_tbl[port].global_int_mask); - writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); - - /* write flush */ - readl(int_mask_tbl[port].global_int_mask); - } else { - dev_err(&icom_port->adapter->pci_dev->dev, - "Invalid port assignment\n"); - } - - spin_unlock_irqrestore(&icom_lock, flags); - return 0; -} - -static void shutdown(struct icom_port *icom_port) -{ - unsigned long temp; - unsigned char cmdReg; - unsigned long flags; - int port; - - spin_lock_irqsave(&icom_lock, flags); - trace(icom_port, "SHUTDOWN", 0); - - /* - * disable all interrupts - */ - port = icom_port->port; - if (port == 0 || port == 1) - int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; - else - int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; - - if (port < 4) { - temp = readl(int_mask_tbl[port].global_int_mask); - writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); - - /* write flush */ - readl(int_mask_tbl[port].global_int_mask); - } else { - dev_err(&icom_port->adapter->pci_dev->dev, - "Invalid port assignment\n"); - } - spin_unlock_irqrestore(&icom_lock, flags); - - /* - * disable break condition - */ - cmdReg = readb(&icom_port->dram->CmdReg); - if (cmdReg & CMD_SND_BREAK) { - writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg); - } -} - -static int icom_write(struct uart_port *port) -{ - unsigned long data_count; - unsigned char cmdReg; - unsigned long offset; - int temp_tail = port->state->xmit.tail; - - trace(ICOM_PORT, "WRITE", 0); - - if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & - SA_FLAGS_READY_TO_XMIT) { - trace(ICOM_PORT, "WRITE_FULL", 0); - return 0; - } - - data_count = 0; - while ((port->state->xmit.head != temp_tail) && - (data_count <= XMIT_BUFF_SZ)) { - - ICOM_PORT->xmit_buf[data_count++] = - port->state->xmit.buf[temp_tail]; - - temp_tail++; - temp_tail &= (UART_XMIT_SIZE - 1); - } - - if (data_count) { - ICOM_PORT->statStg->xmit[0].flags = - cpu_to_le16(SA_FLAGS_READY_TO_XMIT); - ICOM_PORT->statStg->xmit[0].leLength = - cpu_to_le16(data_count); - offset = - (unsigned long) &ICOM_PORT->statStg->xmit[0] - - (unsigned long) ICOM_PORT->statStg; - *ICOM_PORT->xmitRestart = - cpu_to_le32(ICOM_PORT->statStg_pci + offset); - cmdReg = readb(&ICOM_PORT->dram->CmdReg); - writeb(cmdReg | CMD_XMIT_RCV_ENABLE, - &ICOM_PORT->dram->CmdReg); - writeb(START_XMIT, &ICOM_PORT->dram->StartXmitCmd); - trace(ICOM_PORT, "WRITE_START", data_count); - /* write flush */ - readb(&ICOM_PORT->dram->StartXmitCmd); - } - - return data_count; -} - -static inline void check_modem_status(struct icom_port *icom_port) -{ - static char old_status = 0; - char delta_status; - unsigned char status; - - spin_lock(&icom_port->uart_port.lock); - - /*modem input register */ - status = readb(&icom_port->dram->isr); - trace(icom_port, "CHECK_MODEM", status); - delta_status = status ^ old_status; - if (delta_status) { - if (delta_status & ICOM_RI) - icom_port->uart_port.icount.rng++; - if (delta_status & ICOM_DSR) - icom_port->uart_port.icount.dsr++; - if (delta_status & ICOM_DCD) - uart_handle_dcd_change(&icom_port->uart_port, - delta_status & ICOM_DCD); - if (delta_status & ICOM_CTS) - uart_handle_cts_change(&icom_port->uart_port, - delta_status & ICOM_CTS); - - wake_up_interruptible(&icom_port->uart_port.state-> - port.delta_msr_wait); - old_status = status; - } - spin_unlock(&icom_port->uart_port.lock); -} - -static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port) -{ - unsigned short int count; - int i; - - if (port_int_reg & (INT_XMIT_COMPLETED)) { - trace(icom_port, "XMIT_COMPLETE", 0); - - /* clear buffer in use bit */ - icom_port->statStg->xmit[0].flags &= - cpu_to_le16(~SA_FLAGS_READY_TO_XMIT); - - count = (unsigned short int) - cpu_to_le16(icom_port->statStg->xmit[0].leLength); - icom_port->uart_port.icount.tx += count; - - for (i=0; iuart_port.state->xmit); i++) { - - icom_port->uart_port.state->xmit.tail++; - icom_port->uart_port.state->xmit.tail &= - (UART_XMIT_SIZE - 1); - } - - if (!icom_write(&icom_port->uart_port)) - /* activate write queue */ - uart_write_wakeup(&icom_port->uart_port); - } else - trace(icom_port, "XMIT_DISABLED", 0); -} - -static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) -{ - short int count, rcv_buff; - struct tty_struct *tty = icom_port->uart_port.state->port.tty; - unsigned short int status; - struct uart_icount *icount; - unsigned long offset; - unsigned char flag; - - trace(icom_port, "RCV_COMPLETE", 0); - rcv_buff = icom_port->next_rcv; - - status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); - while (status & SA_FL_RCV_DONE) { - int first = -1; - - trace(icom_port, "FID_STATUS", status); - count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength); - - trace(icom_port, "RCV_COUNT", count); - - trace(icom_port, "REAL_COUNT", count); - - offset = - cpu_to_le32(icom_port->statStg->rcv[rcv_buff].leBuffer) - - icom_port->recv_buf_pci; - - /* Block copy all but the last byte as this may have status */ - if (count > 0) { - first = icom_port->recv_buf[offset]; - tty_insert_flip_string(tty, icom_port->recv_buf + offset, count - 1); - } - - icount = &icom_port->uart_port.icount; - icount->rx += count; - - /* Break detect logic */ - if ((status & SA_FLAGS_FRAME_ERROR) - && first == 0) { - status &= ~SA_FLAGS_FRAME_ERROR; - status |= SA_FLAGS_BREAK_DET; - trace(icom_port, "BREAK_DET", 0); - } - - flag = TTY_NORMAL; - - if (status & - (SA_FLAGS_BREAK_DET | SA_FLAGS_PARITY_ERROR | - SA_FLAGS_FRAME_ERROR | SA_FLAGS_OVERRUN)) { - - if (status & SA_FLAGS_BREAK_DET) - icount->brk++; - if (status & SA_FLAGS_PARITY_ERROR) - icount->parity++; - if (status & SA_FLAGS_FRAME_ERROR) - icount->frame++; - if (status & SA_FLAGS_OVERRUN) - icount->overrun++; - - /* - * Now check to see if character should be - * ignored, and mask off conditions which - * should be ignored. - */ - if (status & icom_port->ignore_status_mask) { - trace(icom_port, "IGNORE_CHAR", 0); - goto ignore_char; - } - - status &= icom_port->read_status_mask; - - if (status & SA_FLAGS_BREAK_DET) { - flag = TTY_BREAK; - } else if (status & SA_FLAGS_PARITY_ERROR) { - trace(icom_port, "PARITY_ERROR", 0); - flag = TTY_PARITY; - } else if (status & SA_FLAGS_FRAME_ERROR) - flag = TTY_FRAME; - - } - - tty_insert_flip_char(tty, *(icom_port->recv_buf + offset + count - 1), flag); - - if (status & SA_FLAGS_OVERRUN) - /* - * Overrun is special, since it's - * reported immediately, and doesn't - * affect the current character - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); -ignore_char: - icom_port->statStg->rcv[rcv_buff].flags = 0; - icom_port->statStg->rcv[rcv_buff].leLength = 0; - icom_port->statStg->rcv[rcv_buff].WorkingLength = - (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); - - rcv_buff++; - if (rcv_buff == NUM_RBUFFS) - rcv_buff = 0; - - status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); - } - icom_port->next_rcv = rcv_buff; - tty_flip_buffer_push(tty); -} - -static void process_interrupt(u16 port_int_reg, - struct icom_port *icom_port) -{ - - spin_lock(&icom_port->uart_port.lock); - trace(icom_port, "INTERRUPT", port_int_reg); - - if (port_int_reg & (INT_XMIT_COMPLETED | INT_XMIT_DISABLED)) - xmit_interrupt(port_int_reg, icom_port); - - if (port_int_reg & INT_RCV_COMPLETED) - recv_interrupt(port_int_reg, icom_port); - - spin_unlock(&icom_port->uart_port.lock); -} - -static irqreturn_t icom_interrupt(int irq, void *dev_id) -{ - void __iomem * int_reg; - u32 adapter_interrupts; - u16 port_int_reg; - struct icom_adapter *icom_adapter; - struct icom_port *icom_port; - - /* find icom_port for this interrupt */ - icom_adapter = (struct icom_adapter *) dev_id; - - if (icom_adapter->version == ADAPTER_V2) { - int_reg = icom_adapter->base_addr + 0x8024; - - adapter_interrupts = readl(int_reg); - - if (adapter_interrupts & 0x00003FFF) { - /* port 2 interrupt, NOTE: for all ADAPTER_V2, port 2 will be active */ - icom_port = &icom_adapter->port_info[2]; - port_int_reg = (u16) adapter_interrupts; - process_interrupt(port_int_reg, icom_port); - check_modem_status(icom_port); - } - if (adapter_interrupts & 0x3FFF0000) { - /* port 3 interrupt */ - icom_port = &icom_adapter->port_info[3]; - if (icom_port->status == ICOM_PORT_ACTIVE) { - port_int_reg = - (u16) (adapter_interrupts >> 16); - process_interrupt(port_int_reg, icom_port); - check_modem_status(icom_port); - } - } - - /* Clear out any pending interrupts */ - writel(adapter_interrupts, int_reg); - - int_reg = icom_adapter->base_addr + 0x8004; - } else { - int_reg = icom_adapter->base_addr + 0x4004; - } - - adapter_interrupts = readl(int_reg); - - if (adapter_interrupts & 0x00003FFF) { - /* port 0 interrupt, NOTE: for all adapters, port 0 will be active */ - icom_port = &icom_adapter->port_info[0]; - port_int_reg = (u16) adapter_interrupts; - process_interrupt(port_int_reg, icom_port); - check_modem_status(icom_port); - } - if (adapter_interrupts & 0x3FFF0000) { - /* port 1 interrupt */ - icom_port = &icom_adapter->port_info[1]; - if (icom_port->status == ICOM_PORT_ACTIVE) { - port_int_reg = (u16) (adapter_interrupts >> 16); - process_interrupt(port_int_reg, icom_port); - check_modem_status(icom_port); - } - } - - /* Clear out any pending interrupts */ - writel(adapter_interrupts, int_reg); - - /* flush the write */ - adapter_interrupts = readl(int_reg); - - return IRQ_HANDLED; -} - -/* - * ------------------------------------------------------------------ - * Begin serial-core API - * ------------------------------------------------------------------ - */ -static unsigned int icom_tx_empty(struct uart_port *port) -{ - int ret; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & - SA_FLAGS_READY_TO_XMIT) - ret = TIOCSER_TEMT; - else - ret = 0; - - spin_unlock_irqrestore(&port->lock, flags); - return ret; -} - -static void icom_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - unsigned char local_osr; - - trace(ICOM_PORT, "SET_MODEM", 0); - local_osr = readb(&ICOM_PORT->dram->osr); - - if (mctrl & TIOCM_RTS) { - trace(ICOM_PORT, "RAISE_RTS", 0); - local_osr |= ICOM_RTS; - } else { - trace(ICOM_PORT, "LOWER_RTS", 0); - local_osr &= ~ICOM_RTS; - } - - if (mctrl & TIOCM_DTR) { - trace(ICOM_PORT, "RAISE_DTR", 0); - local_osr |= ICOM_DTR; - } else { - trace(ICOM_PORT, "LOWER_DTR", 0); - local_osr &= ~ICOM_DTR; - } - - writeb(local_osr, &ICOM_PORT->dram->osr); -} - -static unsigned int icom_get_mctrl(struct uart_port *port) -{ - unsigned char status; - unsigned int result; - - trace(ICOM_PORT, "GET_MODEM", 0); - - status = readb(&ICOM_PORT->dram->isr); - - result = ((status & ICOM_DCD) ? TIOCM_CAR : 0) - | ((status & ICOM_RI) ? TIOCM_RNG : 0) - | ((status & ICOM_DSR) ? TIOCM_DSR : 0) - | ((status & ICOM_CTS) ? TIOCM_CTS : 0); - return result; -} - -static void icom_stop_tx(struct uart_port *port) -{ - unsigned char cmdReg; - - trace(ICOM_PORT, "STOP", 0); - cmdReg = readb(&ICOM_PORT->dram->CmdReg); - writeb(cmdReg | CMD_HOLD_XMIT, &ICOM_PORT->dram->CmdReg); -} - -static void icom_start_tx(struct uart_port *port) -{ - unsigned char cmdReg; - - trace(ICOM_PORT, "START", 0); - cmdReg = readb(&ICOM_PORT->dram->CmdReg); - if ((cmdReg & CMD_HOLD_XMIT) == CMD_HOLD_XMIT) - writeb(cmdReg & ~CMD_HOLD_XMIT, - &ICOM_PORT->dram->CmdReg); - - icom_write(port); -} - -static void icom_send_xchar(struct uart_port *port, char ch) -{ - unsigned char xdata; - int index; - unsigned long flags; - - trace(ICOM_PORT, "SEND_XCHAR", ch); - - /* wait .1 sec to send char */ - for (index = 0; index < 10; index++) { - spin_lock_irqsave(&port->lock, flags); - xdata = readb(&ICOM_PORT->dram->xchar); - if (xdata == 0x00) { - trace(ICOM_PORT, "QUICK_WRITE", 0); - writeb(ch, &ICOM_PORT->dram->xchar); - - /* flush write operation */ - xdata = readb(&ICOM_PORT->dram->xchar); - spin_unlock_irqrestore(&port->lock, flags); - break; - } - spin_unlock_irqrestore(&port->lock, flags); - msleep(10); - } -} - -static void icom_stop_rx(struct uart_port *port) -{ - unsigned char cmdReg; - - cmdReg = readb(&ICOM_PORT->dram->CmdReg); - writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); -} - -static void icom_enable_ms(struct uart_port *port) -{ - /* no-op */ -} - -static void icom_break(struct uart_port *port, int break_state) -{ - unsigned char cmdReg; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - trace(ICOM_PORT, "BREAK", 0); - cmdReg = readb(&ICOM_PORT->dram->CmdReg); - if (break_state == -1) { - writeb(cmdReg | CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); - } else { - writeb(cmdReg & ~CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); - } - spin_unlock_irqrestore(&port->lock, flags); -} - -static int icom_open(struct uart_port *port) -{ - int retval; - - kref_get(&ICOM_PORT->adapter->kref); - retval = startup(ICOM_PORT); - - if (retval) { - kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); - trace(ICOM_PORT, "STARTUP_ERROR", 0); - return retval; - } - - return 0; -} - -static void icom_close(struct uart_port *port) -{ - unsigned char cmdReg; - - trace(ICOM_PORT, "CLOSE", 0); - - /* stop receiver */ - cmdReg = readb(&ICOM_PORT->dram->CmdReg); - writeb(cmdReg & (unsigned char) ~CMD_RCV_ENABLE, - &ICOM_PORT->dram->CmdReg); - - shutdown(ICOM_PORT); - - kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); -} - -static void icom_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old_termios) -{ - int baud; - unsigned cflag, iflag; - char new_config2; - char new_config3 = 0; - char tmp_byte; - int index; - int rcv_buff, xmit_buff; - unsigned long offset; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - trace(ICOM_PORT, "CHANGE_SPEED", 0); - - cflag = termios->c_cflag; - iflag = termios->c_iflag; - - new_config2 = ICOM_ACFG_DRIVE1; - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: /* 5 bits/char */ - new_config2 |= ICOM_ACFG_5BPC; - break; - case CS6: /* 6 bits/char */ - new_config2 |= ICOM_ACFG_6BPC; - break; - case CS7: /* 7 bits/char */ - new_config2 |= ICOM_ACFG_7BPC; - break; - case CS8: /* 8 bits/char */ - new_config2 |= ICOM_ACFG_8BPC; - break; - default: - break; - } - if (cflag & CSTOPB) { - /* 2 stop bits */ - new_config2 |= ICOM_ACFG_2STOP_BIT; - } - if (cflag & PARENB) { - /* parity bit enabled */ - new_config2 |= ICOM_ACFG_PARITY_ENAB; - trace(ICOM_PORT, "PARENB", 0); - } - if (cflag & PARODD) { - /* odd parity */ - new_config2 |= ICOM_ACFG_PARITY_ODD; - trace(ICOM_PORT, "PARODD", 0); - } - - /* Determine divisor based on baud rate */ - baud = uart_get_baud_rate(port, termios, old_termios, - icom_acfg_baud[0], - icom_acfg_baud[BAUD_TABLE_LIMIT]); - if (!baud) - baud = 9600; /* B0 transition handled in rs_set_termios */ - - for (index = 0; index < BAUD_TABLE_LIMIT; index++) { - if (icom_acfg_baud[index] == baud) { - new_config3 = index; - break; - } - } - - uart_update_timeout(port, cflag, baud); - - /* CTS flow control flag and modem status interrupts */ - tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); - if (cflag & CRTSCTS) - tmp_byte |= HDLC_HDW_FLOW; - else - tmp_byte &= ~HDLC_HDW_FLOW; - writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); - - /* - * Set up parity check flag - */ - ICOM_PORT->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE; - if (iflag & INPCK) - ICOM_PORT->read_status_mask |= - SA_FLAGS_FRAME_ERROR | SA_FLAGS_PARITY_ERROR; - - if ((iflag & BRKINT) || (iflag & PARMRK)) - ICOM_PORT->read_status_mask |= SA_FLAGS_BREAK_DET; - - /* - * Characters to ignore - */ - ICOM_PORT->ignore_status_mask = 0; - if (iflag & IGNPAR) - ICOM_PORT->ignore_status_mask |= - SA_FLAGS_PARITY_ERROR | SA_FLAGS_FRAME_ERROR; - if (iflag & IGNBRK) { - ICOM_PORT->ignore_status_mask |= SA_FLAGS_BREAK_DET; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (iflag & IGNPAR) - ICOM_PORT->ignore_status_mask |= SA_FLAGS_OVERRUN; - } - - /* - * !!! ignore all characters if CREAD is not set - */ - if ((cflag & CREAD) == 0) - ICOM_PORT->ignore_status_mask |= SA_FL_RCV_DONE; - - /* Turn off Receiver to prepare for reset */ - writeb(CMD_RCV_DISABLE, &ICOM_PORT->dram->CmdReg); - - for (index = 0; index < 10; index++) { - if (readb(&ICOM_PORT->dram->PrevCmdReg) == 0x00) { - break; - } - } - - /* clear all current buffers of data */ - for (rcv_buff = 0; rcv_buff < NUM_RBUFFS; rcv_buff++) { - ICOM_PORT->statStg->rcv[rcv_buff].flags = 0; - ICOM_PORT->statStg->rcv[rcv_buff].leLength = 0; - ICOM_PORT->statStg->rcv[rcv_buff].WorkingLength = - (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); - } - - for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) { - ICOM_PORT->statStg->xmit[xmit_buff].flags = 0; - } - - /* activate changes and start xmit and receiver here */ - /* Enable the receiver */ - writeb(new_config3, &(ICOM_PORT->dram->async_config3)); - writeb(new_config2, &(ICOM_PORT->dram->async_config2)); - tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); - tmp_byte |= HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL; - writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); - writeb(0x04, &(ICOM_PORT->dram->FlagFillIdleTimer)); /* 0.5 seconds */ - writeb(0xFF, &(ICOM_PORT->dram->ier)); /* enable modem signal interrupts */ - - /* reset processor */ - writeb(CMD_RESTART, &ICOM_PORT->dram->CmdReg); - - for (index = 0; index < 10; index++) { - if (readb(&ICOM_PORT->dram->CmdReg) == 0x00) { - break; - } - } - - /* Enable Transmitter and Reciever */ - offset = - (unsigned long) &ICOM_PORT->statStg->rcv[0] - - (unsigned long) ICOM_PORT->statStg; - writel(ICOM_PORT->statStg_pci + offset, - &ICOM_PORT->dram->RcvStatusAddr); - ICOM_PORT->next_rcv = 0; - ICOM_PORT->put_length = 0; - *ICOM_PORT->xmitRestart = 0; - writel(ICOM_PORT->xmitRestart_pci, - &ICOM_PORT->dram->XmitStatusAddr); - trace(ICOM_PORT, "XR_ENAB", 0); - writeb(CMD_XMIT_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *icom_type(struct uart_port *port) -{ - return "icom"; -} - -static void icom_release_port(struct uart_port *port) -{ -} - -static int icom_request_port(struct uart_port *port) -{ - return 0; -} - -static void icom_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_ICOM; -} - -static struct uart_ops icom_ops = { - .tx_empty = icom_tx_empty, - .set_mctrl = icom_set_mctrl, - .get_mctrl = icom_get_mctrl, - .stop_tx = icom_stop_tx, - .start_tx = icom_start_tx, - .send_xchar = icom_send_xchar, - .stop_rx = icom_stop_rx, - .enable_ms = icom_enable_ms, - .break_ctl = icom_break, - .startup = icom_open, - .shutdown = icom_close, - .set_termios = icom_set_termios, - .type = icom_type, - .release_port = icom_release_port, - .request_port = icom_request_port, - .config_port = icom_config_port, -}; - -#define ICOM_CONSOLE NULL - -static struct uart_driver icom_uart_driver = { - .owner = THIS_MODULE, - .driver_name = ICOM_DRIVER_NAME, - .dev_name = "ttyA", - .major = ICOM_MAJOR, - .minor = ICOM_MINOR_START, - .nr = NR_PORTS, - .cons = ICOM_CONSOLE, -}; - -static int __devinit icom_init_ports(struct icom_adapter *icom_adapter) -{ - u32 subsystem_id = icom_adapter->subsystem_id; - int i; - struct icom_port *icom_port; - - if (icom_adapter->version == ADAPTER_V1) { - icom_adapter->numb_ports = 2; - - for (i = 0; i < 2; i++) { - icom_port = &icom_adapter->port_info[i]; - icom_port->port = i; - icom_port->status = ICOM_PORT_ACTIVE; - icom_port->imbed_modem = ICOM_UNKNOWN; - } - } else { - if (subsystem_id == PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL) { - icom_adapter->numb_ports = 4; - - for (i = 0; i < 4; i++) { - icom_port = &icom_adapter->port_info[i]; - - icom_port->port = i; - icom_port->status = ICOM_PORT_ACTIVE; - icom_port->imbed_modem = ICOM_IMBED_MODEM; - } - } else { - icom_adapter->numb_ports = 4; - - icom_adapter->port_info[0].port = 0; - icom_adapter->port_info[0].status = ICOM_PORT_ACTIVE; - - if (subsystem_id == - PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM) { - icom_adapter->port_info[0].imbed_modem = ICOM_IMBED_MODEM; - } else { - icom_adapter->port_info[0].imbed_modem = ICOM_RVX; - } - - icom_adapter->port_info[1].status = ICOM_PORT_OFF; - - icom_adapter->port_info[2].port = 2; - icom_adapter->port_info[2].status = ICOM_PORT_ACTIVE; - icom_adapter->port_info[2].imbed_modem = ICOM_RVX; - icom_adapter->port_info[3].status = ICOM_PORT_OFF; - } - } - - return 0; -} - -static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *icom_adapter, int port_num) -{ - if (icom_adapter->version == ADAPTER_V1) { - icom_port->global_reg = icom_adapter->base_addr + 0x4000; - icom_port->int_reg = icom_adapter->base_addr + - 0x4004 + 2 - 2 * port_num; - } else { - icom_port->global_reg = icom_adapter->base_addr + 0x8000; - if (icom_port->port < 2) - icom_port->int_reg = icom_adapter->base_addr + - 0x8004 + 2 - 2 * icom_port->port; - else - icom_port->int_reg = icom_adapter->base_addr + - 0x8024 + 2 - 2 * (icom_port->port - 2); - } -} -static int __devinit icom_load_ports(struct icom_adapter *icom_adapter) -{ - struct icom_port *icom_port; - int port_num; - - for (port_num = 0; port_num < icom_adapter->numb_ports; port_num++) { - - icom_port = &icom_adapter->port_info[port_num]; - - if (icom_port->status == ICOM_PORT_ACTIVE) { - icom_port_active(icom_port, icom_adapter, port_num); - icom_port->dram = icom_adapter->base_addr + - 0x2000 * icom_port->port; - - icom_port->adapter = icom_adapter; - - /* get port memory */ - if (get_port_memory(icom_port) != 0) { - dev_err(&icom_port->adapter->pci_dev->dev, - "Memory allocation for port FAILED\n"); - } - } - } - return 0; -} - -static int __devinit icom_alloc_adapter(struct icom_adapter - **icom_adapter_ref) -{ - int adapter_count = 0; - struct icom_adapter *icom_adapter; - struct icom_adapter *cur_adapter_entry; - struct list_head *tmp; - - icom_adapter = (struct icom_adapter *) - kzalloc(sizeof(struct icom_adapter), GFP_KERNEL); - - if (!icom_adapter) { - return -ENOMEM; - } - - list_for_each(tmp, &icom_adapter_head) { - cur_adapter_entry = - list_entry(tmp, struct icom_adapter, - icom_adapter_entry); - if (cur_adapter_entry->index != adapter_count) { - break; - } - adapter_count++; - } - - icom_adapter->index = adapter_count; - list_add_tail(&icom_adapter->icom_adapter_entry, tmp); - - *icom_adapter_ref = icom_adapter; - return 0; -} - -static void icom_free_adapter(struct icom_adapter *icom_adapter) -{ - list_del(&icom_adapter->icom_adapter_entry); - kfree(icom_adapter); -} - -static void icom_remove_adapter(struct icom_adapter *icom_adapter) -{ - struct icom_port *icom_port; - int index; - - for (index = 0; index < icom_adapter->numb_ports; index++) { - icom_port = &icom_adapter->port_info[index]; - - if (icom_port->status == ICOM_PORT_ACTIVE) { - dev_info(&icom_adapter->pci_dev->dev, - "Device removed\n"); - - uart_remove_one_port(&icom_uart_driver, - &icom_port->uart_port); - - /* be sure that DTR and RTS are dropped */ - writeb(0x00, &icom_port->dram->osr); - - /* Wait 0.1 Sec for simple Init to complete */ - msleep(100); - - /* Stop proccessor */ - stop_processor(icom_port); - - free_port_memory(icom_port); - } - } - - free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter); - iounmap(icom_adapter->base_addr); - pci_release_regions(icom_adapter->pci_dev); - icom_free_adapter(icom_adapter); -} - -static void icom_kref_release(struct kref *kref) -{ - struct icom_adapter *icom_adapter; - - icom_adapter = to_icom_adapter(kref); - icom_remove_adapter(icom_adapter); -} - -static int __devinit icom_probe(struct pci_dev *dev, - const struct pci_device_id *ent) -{ - int index; - unsigned int command_reg; - int retval; - struct icom_adapter *icom_adapter; - struct icom_port *icom_port; - - retval = pci_enable_device(dev); - if (retval) { - dev_err(&dev->dev, "Device enable FAILED\n"); - return retval; - } - - if ( (retval = pci_request_regions(dev, "icom"))) { - dev_err(&dev->dev, "pci_request_regions FAILED\n"); - pci_disable_device(dev); - return retval; - } - - pci_set_master(dev); - - if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) { - dev_err(&dev->dev, "PCI Config read FAILED\n"); - return retval; - } - - pci_write_config_dword(dev, PCI_COMMAND, - command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER - | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); - - if (ent->driver_data == ADAPTER_V1) { - pci_write_config_dword(dev, 0x44, 0x8300830A); - } else { - pci_write_config_dword(dev, 0x44, 0x42004200); - pci_write_config_dword(dev, 0x48, 0x42004200); - } - - - retval = icom_alloc_adapter(&icom_adapter); - if (retval) { - dev_err(&dev->dev, "icom_alloc_adapter FAILED\n"); - retval = -EIO; - goto probe_exit0; - } - - icom_adapter->base_addr_pci = pci_resource_start(dev, 0); - icom_adapter->pci_dev = dev; - icom_adapter->version = ent->driver_data; - icom_adapter->subsystem_id = ent->subdevice; - - - retval = icom_init_ports(icom_adapter); - if (retval) { - dev_err(&dev->dev, "Port configuration failed\n"); - goto probe_exit1; - } - - icom_adapter->base_addr = pci_ioremap_bar(dev, 0); - - if (!icom_adapter->base_addr) - goto probe_exit1; - - /* save off irq and request irq line */ - if ( (retval = request_irq(dev->irq, icom_interrupt, - IRQF_DISABLED | IRQF_SHARED, ICOM_DRIVER_NAME, - (void *) icom_adapter))) { - goto probe_exit2; - } - - retval = icom_load_ports(icom_adapter); - - for (index = 0; index < icom_adapter->numb_ports; index++) { - icom_port = &icom_adapter->port_info[index]; - - if (icom_port->status == ICOM_PORT_ACTIVE) { - icom_port->uart_port.irq = icom_port->adapter->pci_dev->irq; - icom_port->uart_port.type = PORT_ICOM; - icom_port->uart_port.iotype = UPIO_MEM; - icom_port->uart_port.membase = - (char *) icom_adapter->base_addr_pci; - icom_port->uart_port.fifosize = 16; - icom_port->uart_port.ops = &icom_ops; - icom_port->uart_port.line = - icom_port->port + icom_adapter->index * 4; - if (uart_add_one_port (&icom_uart_driver, &icom_port->uart_port)) { - icom_port->status = ICOM_PORT_OFF; - dev_err(&dev->dev, "Device add failed\n"); - } else - dev_info(&dev->dev, "Device added\n"); - } - } - - kref_init(&icom_adapter->kref); - return 0; - -probe_exit2: - iounmap(icom_adapter->base_addr); -probe_exit1: - icom_free_adapter(icom_adapter); - -probe_exit0: - pci_release_regions(dev); - pci_disable_device(dev); - - return retval; -} - -static void __devexit icom_remove(struct pci_dev *dev) -{ - struct icom_adapter *icom_adapter; - struct list_head *tmp; - - list_for_each(tmp, &icom_adapter_head) { - icom_adapter = list_entry(tmp, struct icom_adapter, - icom_adapter_entry); - if (icom_adapter->pci_dev == dev) { - kref_put(&icom_adapter->kref, icom_kref_release); - return; - } - } - - dev_err(&dev->dev, "Unable to find device to remove\n"); -} - -static struct pci_driver icom_pci_driver = { - .name = ICOM_DRIVER_NAME, - .id_table = icom_pci_table, - .probe = icom_probe, - .remove = __devexit_p(icom_remove), -}; - -static int __init icom_init(void) -{ - int ret; - - spin_lock_init(&icom_lock); - - ret = uart_register_driver(&icom_uart_driver); - if (ret) - return ret; - - ret = pci_register_driver(&icom_pci_driver); - - if (ret < 0) - uart_unregister_driver(&icom_uart_driver); - - return ret; -} - -static void __exit icom_exit(void) -{ - pci_unregister_driver(&icom_pci_driver); - uart_unregister_driver(&icom_uart_driver); -} - -module_init(icom_init); -module_exit(icom_exit); - -MODULE_AUTHOR("Michael Anderson "); -MODULE_DESCRIPTION("IBM iSeries Serial IOA driver"); -MODULE_SUPPORTED_DEVICE - ("IBM iSeries 2745, 2771, 2772, 2742, 2793 and 2805 Communications adapters"); -MODULE_LICENSE("GPL"); -MODULE_FIRMWARE("icom_call_setup.bin"); -MODULE_FIRMWARE("icom_res_dce.bin"); -MODULE_FIRMWARE("icom_asc.bin"); diff --git a/drivers/serial/icom.h b/drivers/serial/icom.h deleted file mode 100644 index c8029e0025c9..000000000000 --- a/drivers/serial/icom.h +++ /dev/null @@ -1,287 +0,0 @@ -/* - * icom.h - * - * Copyright (C) 2001 Michael Anderson, IBM Corporation - * - * Serial device driver include file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include - -#define BAUD_TABLE_LIMIT ((sizeof(icom_acfg_baud)/sizeof(int)) - 1) -static int icom_acfg_baud[] = { - 300, - 600, - 900, - 1200, - 1800, - 2400, - 3600, - 4800, - 7200, - 9600, - 14400, - 19200, - 28800, - 38400, - 57600, - 76800, - 115200, - 153600, - 230400, - 307200, - 460800, -}; - -struct icom_regs { - u32 control; /* Adapter Control Register */ - u32 interrupt; /* Adapter Interrupt Register */ - u32 int_mask; /* Adapter Interrupt Mask Reg */ - u32 int_pri; /* Adapter Interrupt Priority r */ - u32 int_reg_b; /* Adapter non-masked Interrupt */ - u32 resvd01; - u32 resvd02; - u32 resvd03; - u32 control_2; /* Adapter Control Register 2 */ - u32 interrupt_2; /* Adapter Interrupt Register 2 */ - u32 int_mask_2; /* Adapter Interrupt Mask 2 */ - u32 int_pri_2; /* Adapter Interrupt Prior 2 */ - u32 int_reg_2b; /* Adapter non-masked 2 */ -}; - -struct func_dram { - u32 reserved[108]; /* 0-1B0 reserved by personality code */ - u32 RcvStatusAddr; /* 1B0-1B3 Status Address for Next rcv */ - u8 RcvStnAddr; /* 1B4 Receive Station Addr */ - u8 IdleState; /* 1B5 Idle State */ - u8 IdleMonitor; /* 1B6 Idle Monitor */ - u8 FlagFillIdleTimer; /* 1B7 Flag Fill Idle Timer */ - u32 XmitStatusAddr; /* 1B8-1BB Transmit Status Address */ - u8 StartXmitCmd; /* 1BC Start Xmit Command */ - u8 HDLCConfigReg; /* 1BD Reserved */ - u8 CauseCode; /* 1BE Cause code for fatal error */ - u8 xchar; /* 1BF High priority send */ - u32 reserved3; /* 1C0-1C3 Reserved */ - u8 PrevCmdReg; /* 1C4 Reserved */ - u8 CmdReg; /* 1C5 Command Register */ - u8 async_config2; /* 1C6 Async Config Byte 2 */ - u8 async_config3; /* 1C7 Async Config Byte 3 */ - u8 dce_resvd[20]; /* 1C8-1DB DCE Rsvd */ - u8 dce_resvd21; /* 1DC DCE Rsvd (21st byte */ - u8 misc_flags; /* 1DD misc flags */ -#define V2_HARDWARE 0x40 -#define ICOM_HDW_ACTIVE 0x01 - u8 call_length; /* 1DE Phone #/CFI buff ln */ - u8 call_length2; /* 1DF Upper byte (unused) */ - u32 call_addr; /* 1E0-1E3 Phn #/CFI buff addr */ - u16 timer_value; /* 1E4-1E5 general timer value */ - u8 timer_command; /* 1E6 general timer cmd */ - u8 dce_command; /* 1E7 dce command reg */ - u8 dce_cmd_status; /* 1E8 dce command stat */ - u8 x21_r1_ioff; /* 1E9 dce ready counter */ - u8 x21_r0_ioff; /* 1EA dce not ready ctr */ - u8 x21_ralt_ioff; /* 1EB dce CNR counter */ - u8 x21_r1_ion; /* 1EC dce ready I on ctr */ - u8 rsvd_ier; /* 1ED Rsvd for IER (if ne */ - u8 ier; /* 1EE Interrupt Enable */ - u8 isr; /* 1EF Input Signal Reg */ - u8 osr; /* 1F0 Output Signal Reg */ - u8 reset; /* 1F1 Reset/Reload Reg */ - u8 disable; /* 1F2 Disable Reg */ - u8 sync; /* 1F3 Sync Reg */ - u8 error_stat; /* 1F4 Error Status */ - u8 cable_id; /* 1F5 Cable ID */ - u8 cs_length; /* 1F6 CS Load Length */ - u8 mac_length; /* 1F7 Mac Load Length */ - u32 cs_load_addr; /* 1F8-1FB Call Load PCI Addr */ - u32 mac_load_addr; /* 1FC-1FF Mac Load PCI Addr */ -}; - -/* - * adapter defines and structures - */ -#define ICOM_CONTROL_START_A 0x00000008 -#define ICOM_CONTROL_STOP_A 0x00000004 -#define ICOM_CONTROL_START_B 0x00000002 -#define ICOM_CONTROL_STOP_B 0x00000001 -#define ICOM_CONTROL_START_C 0x00000008 -#define ICOM_CONTROL_STOP_C 0x00000004 -#define ICOM_CONTROL_START_D 0x00000002 -#define ICOM_CONTROL_STOP_D 0x00000001 -#define ICOM_IRAM_OFFSET 0x1000 -#define ICOM_IRAM_SIZE 0x0C00 -#define ICOM_DCE_IRAM_OFFSET 0x0A00 -#define ICOM_CABLE_ID_VALID 0x01 -#define ICOM_CABLE_ID_MASK 0xF0 -#define ICOM_DISABLE 0x80 -#define CMD_XMIT_RCV_ENABLE 0xC0 -#define CMD_XMIT_ENABLE 0x40 -#define CMD_RCV_DISABLE 0x00 -#define CMD_RCV_ENABLE 0x80 -#define CMD_RESTART 0x01 -#define CMD_HOLD_XMIT 0x02 -#define CMD_SND_BREAK 0x04 -#define RS232_CABLE 0x06 -#define V24_CABLE 0x0E -#define V35_CABLE 0x0C -#define V36_CABLE 0x02 -#define NO_CABLE 0x00 -#define START_DOWNLOAD 0x80 -#define ICOM_INT_MASK_PRC_A 0x00003FFF -#define ICOM_INT_MASK_PRC_B 0x3FFF0000 -#define ICOM_INT_MASK_PRC_C 0x00003FFF -#define ICOM_INT_MASK_PRC_D 0x3FFF0000 -#define INT_RCV_COMPLETED 0x1000 -#define INT_XMIT_COMPLETED 0x2000 -#define INT_IDLE_DETECT 0x0800 -#define INT_RCV_DISABLED 0x0400 -#define INT_XMIT_DISABLED 0x0200 -#define INT_RCV_XMIT_SHUTDOWN 0x0100 -#define INT_FATAL_ERROR 0x0080 -#define INT_CABLE_PULL 0x0020 -#define INT_SIGNAL_CHANGE 0x0010 -#define HDLC_PPP_PURE_ASYNC 0x02 -#define HDLC_FF_FILL 0x00 -#define HDLC_HDW_FLOW 0x01 -#define START_XMIT 0x80 -#define ICOM_ACFG_DRIVE1 0x20 -#define ICOM_ACFG_NO_PARITY 0x00 -#define ICOM_ACFG_PARITY_ENAB 0x02 -#define ICOM_ACFG_PARITY_ODD 0x01 -#define ICOM_ACFG_8BPC 0x00 -#define ICOM_ACFG_7BPC 0x04 -#define ICOM_ACFG_6BPC 0x08 -#define ICOM_ACFG_5BPC 0x0C -#define ICOM_ACFG_1STOP_BIT 0x00 -#define ICOM_ACFG_2STOP_BIT 0x10 -#define ICOM_DTR 0x80 -#define ICOM_RTS 0x40 -#define ICOM_RI 0x08 -#define ICOM_DSR 0x80 -#define ICOM_DCD 0x20 -#define ICOM_CTS 0x40 - -#define NUM_XBUFFS 1 -#define NUM_RBUFFS 2 -#define RCV_BUFF_SZ 0x0200 -#define XMIT_BUFF_SZ 0x1000 -struct statusArea { - /**********************************************/ - /* Transmit Status Area */ - /**********************************************/ - struct xmit_status_area{ - u32 leNext; /* Next entry in Little Endian on Adapter */ - u32 leNextASD; - u32 leBuffer; /* Buffer for entry in LE for Adapter */ - u16 leLengthASD; - u16 leOffsetASD; - u16 leLength; /* Length of data in segment */ - u16 flags; -#define SA_FLAGS_DONE 0x0080 /* Done with Segment */ -#define SA_FLAGS_CONTINUED 0x8000 /* More Segments */ -#define SA_FLAGS_IDLE 0x4000 /* Mark IDLE after frm */ -#define SA_FLAGS_READY_TO_XMIT 0x0800 -#define SA_FLAGS_STAT_MASK 0x007F - } xmit[NUM_XBUFFS]; - - /**********************************************/ - /* Receive Status Area */ - /**********************************************/ - struct { - u32 leNext; /* Next entry in Little Endian on Adapter */ - u32 leNextASD; - u32 leBuffer; /* Buffer for entry in LE for Adapter */ - u16 WorkingLength; /* size of segment */ - u16 reserv01; - u16 leLength; /* Length of data in segment */ - u16 flags; -#define SA_FL_RCV_DONE 0x0010 /* Data ready */ -#define SA_FLAGS_OVERRUN 0x0040 -#define SA_FLAGS_PARITY_ERROR 0x0080 -#define SA_FLAGS_FRAME_ERROR 0x0001 -#define SA_FLAGS_FRAME_TRUNC 0x0002 -#define SA_FLAGS_BREAK_DET 0x0004 /* set conditionally by device driver, not hardware */ -#define SA_FLAGS_RCV_MASK 0xFFE6 - } rcv[NUM_RBUFFS]; -}; - -struct icom_adapter; - - -#define ICOM_MAJOR 243 -#define ICOM_MINOR_START 0 - -struct icom_port { - struct uart_port uart_port; - u8 imbed_modem; -#define ICOM_UNKNOWN 1 -#define ICOM_RVX 2 -#define ICOM_IMBED_MODEM 3 - unsigned char cable_id; - unsigned char read_status_mask; - unsigned char ignore_status_mask; - void __iomem * int_reg; - struct icom_regs __iomem *global_reg; - struct func_dram __iomem *dram; - int port; - struct statusArea *statStg; - dma_addr_t statStg_pci; - u32 *xmitRestart; - dma_addr_t xmitRestart_pci; - unsigned char *xmit_buf; - dma_addr_t xmit_buf_pci; - unsigned char *recv_buf; - dma_addr_t recv_buf_pci; - int next_rcv; - int put_length; - int status; -#define ICOM_PORT_ACTIVE 1 /* Port exists. */ -#define ICOM_PORT_OFF 0 /* Port does not exist. */ - int load_in_progress; - struct icom_adapter *adapter; -}; - -struct icom_adapter { - void __iomem * base_addr; - unsigned long base_addr_pci; - struct pci_dev *pci_dev; - struct icom_port port_info[4]; - int index; - int version; -#define ADAPTER_V1 0x0001 -#define ADAPTER_V2 0x0002 - u32 subsystem_id; -#define FOUR_PORT_MODEL 0x0252 -#define V2_TWO_PORTS_RVX 0x021A -#define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM 0x0251 - int numb_ports; - struct list_head icom_adapter_entry; - struct kref kref; -}; - -/* prototype */ -extern void iCom_sercons_init(void); - -struct lookup_proc_table { - u32 __iomem *global_control_reg; - unsigned long processor_id; -}; - -struct lookup_int_table { - u32 __iomem *global_int_mask; - unsigned long processor_id; -}; diff --git a/drivers/serial/ifx6x60.c b/drivers/serial/ifx6x60.c deleted file mode 100644 index ab93763862d5..000000000000 --- a/drivers/serial/ifx6x60.c +++ /dev/null @@ -1,1406 +0,0 @@ -/**************************************************************************** - * - * Driver for the IFX 6x60 spi modem. - * - * Copyright (C) 2008 Option International - * Copyright (C) 2008 Filip Aben - * Denis Joseph Barrow - * Jan Dumon - * - * Copyright (C) 2009, 2010 Intel Corp - * Russ Gorby - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, - * USA - * - * Driver modified by Intel from Option gtm501l_spi.c - * - * Notes - * o The driver currently assumes a single device only. If you need to - * change this then look for saved_ifx_dev and add a device lookup - * o The driver is intended to be big-endian safe but has never been - * tested that way (no suitable hardware). There are a couple of FIXME - * notes by areas that may need addressing - * o Some of the GPIO naming/setup assumptions may need revisiting if - * you need to use this driver for another platform. - * - *****************************************************************************/ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "ifx6x60.h" - -#define IFX_SPI_MORE_MASK 0x10 -#define IFX_SPI_MORE_BIT 12 /* bit position in u16 */ -#define IFX_SPI_CTS_BIT 13 /* bit position in u16 */ -#define IFX_SPI_TTY_ID 0 -#define IFX_SPI_TIMEOUT_SEC 2 -#define IFX_SPI_HEADER_0 (-1) -#define IFX_SPI_HEADER_F (-2) - -/* forward reference */ -static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev); - -/* local variables */ -static int spi_b16 = 1; /* 8 or 16 bit word length */ -static struct tty_driver *tty_drv; -static struct ifx_spi_device *saved_ifx_dev; -static struct lock_class_key ifx_spi_key; - -/* GPIO/GPE settings */ - -/** - * mrdy_set_high - set MRDY GPIO - * @ifx: device we are controlling - * - */ -static inline void mrdy_set_high(struct ifx_spi_device *ifx) -{ - gpio_set_value(ifx->gpio.mrdy, 1); -} - -/** - * mrdy_set_low - clear MRDY GPIO - * @ifx: device we are controlling - * - */ -static inline void mrdy_set_low(struct ifx_spi_device *ifx) -{ - gpio_set_value(ifx->gpio.mrdy, 0); -} - -/** - * ifx_spi_power_state_set - * @ifx_dev: our SPI device - * @val: bits to set - * - * Set bit in power status and signal power system if status becomes non-0 - */ -static void -ifx_spi_power_state_set(struct ifx_spi_device *ifx_dev, unsigned char val) -{ - unsigned long flags; - - spin_lock_irqsave(&ifx_dev->power_lock, flags); - - /* - * if power status is already non-0, just update, else - * tell power system - */ - if (!ifx_dev->power_status) - pm_runtime_get(&ifx_dev->spi_dev->dev); - ifx_dev->power_status |= val; - - spin_unlock_irqrestore(&ifx_dev->power_lock, flags); -} - -/** - * ifx_spi_power_state_clear - clear power bit - * @ifx_dev: our SPI device - * @val: bits to clear - * - * clear bit in power status and signal power system if status becomes 0 - */ -static void -ifx_spi_power_state_clear(struct ifx_spi_device *ifx_dev, unsigned char val) -{ - unsigned long flags; - - spin_lock_irqsave(&ifx_dev->power_lock, flags); - - if (ifx_dev->power_status) { - ifx_dev->power_status &= ~val; - if (!ifx_dev->power_status) - pm_runtime_put(&ifx_dev->spi_dev->dev); - } - - spin_unlock_irqrestore(&ifx_dev->power_lock, flags); -} - -/** - * swap_buf - * @buf: our buffer - * @len : number of bytes (not words) in the buffer - * @end: end of buffer - * - * Swap the contents of a buffer into big endian format - */ -static inline void swap_buf(u16 *buf, int len, void *end) -{ - int n; - - len = ((len + 1) >> 1); - if ((void *)&buf[len] > end) { - pr_err("swap_buf: swap exceeds boundary (%p > %p)!", - &buf[len], end); - return; - } - for (n = 0; n < len; n++) { - *buf = cpu_to_be16(*buf); - buf++; - } -} - -/** - * mrdy_assert - assert MRDY line - * @ifx_dev: our SPI device - * - * Assert mrdy and set timer to wait for SRDY interrupt, if SRDY is low - * now. - * - * FIXME: Can SRDY even go high as we are running this code ? - */ -static void mrdy_assert(struct ifx_spi_device *ifx_dev) -{ - int val = gpio_get_value(ifx_dev->gpio.srdy); - if (!val) { - if (!test_and_set_bit(IFX_SPI_STATE_TIMER_PENDING, - &ifx_dev->flags)) { - ifx_dev->spi_timer.expires = - jiffies + IFX_SPI_TIMEOUT_SEC*HZ; - add_timer(&ifx_dev->spi_timer); - - } - } - ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_DATA_PENDING); - mrdy_set_high(ifx_dev); -} - -/** - * ifx_spi_hangup - hang up an IFX device - * @ifx_dev: our SPI device - * - * Hang up the tty attached to the IFX device if one is currently - * open. If not take no action - */ -static void ifx_spi_ttyhangup(struct ifx_spi_device *ifx_dev) -{ - struct tty_port *pport = &ifx_dev->tty_port; - struct tty_struct *tty = tty_port_tty_get(pport); - if (tty) { - tty_hangup(tty); - tty_kref_put(tty); - } -} - -/** - * ifx_spi_timeout - SPI timeout - * @arg: our SPI device - * - * The SPI has timed out: hang up the tty. Users will then see a hangup - * and error events. - */ -static void ifx_spi_timeout(unsigned long arg) -{ - struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *)arg; - - dev_warn(&ifx_dev->spi_dev->dev, "*** SPI Timeout ***"); - ifx_spi_ttyhangup(ifx_dev); - mrdy_set_low(ifx_dev); - clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); -} - -/* char/tty operations */ - -/** - * ifx_spi_tiocmget - get modem lines - * @tty: our tty device - * @filp: file handle issuing the request - * - * Map the signal state into Linux modem flags and report the value - * in Linux terms - */ -static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp) -{ - unsigned int value; - struct ifx_spi_device *ifx_dev = tty->driver_data; - - value = - (test_bit(IFX_SPI_RTS, &ifx_dev->signal_state) ? TIOCM_RTS : 0) | - (test_bit(IFX_SPI_DTR, &ifx_dev->signal_state) ? TIOCM_DTR : 0) | - (test_bit(IFX_SPI_CTS, &ifx_dev->signal_state) ? TIOCM_CTS : 0) | - (test_bit(IFX_SPI_DSR, &ifx_dev->signal_state) ? TIOCM_DSR : 0) | - (test_bit(IFX_SPI_DCD, &ifx_dev->signal_state) ? TIOCM_CAR : 0) | - (test_bit(IFX_SPI_RI, &ifx_dev->signal_state) ? TIOCM_RNG : 0); - return value; -} - -/** - * ifx_spi_tiocmset - set modem bits - * @tty: the tty structure - * @filp: file handle issuing the request - * @set: bits to set - * @clear: bits to clear - * - * The IFX6x60 only supports DTR and RTS. Set them accordingly - * and flag that an update to the modem is needed. - * - * FIXME: do we need to kick the tranfers when we do this ? - */ -static int ifx_spi_tiocmset(struct tty_struct *tty, struct file *filp, - unsigned int set, unsigned int clear) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - - if (set & TIOCM_RTS) - set_bit(IFX_SPI_RTS, &ifx_dev->signal_state); - if (set & TIOCM_DTR) - set_bit(IFX_SPI_DTR, &ifx_dev->signal_state); - if (clear & TIOCM_RTS) - clear_bit(IFX_SPI_RTS, &ifx_dev->signal_state); - if (clear & TIOCM_DTR) - clear_bit(IFX_SPI_DTR, &ifx_dev->signal_state); - - set_bit(IFX_SPI_UPDATE, &ifx_dev->signal_state); - return 0; -} - -/** - * ifx_spi_open - called on tty open - * @tty: our tty device - * @filp: file handle being associated with the tty - * - * Open the tty interface. We let the tty_port layer do all the work - * for us. - * - * FIXME: Remove single device assumption and saved_ifx_dev - */ -static int ifx_spi_open(struct tty_struct *tty, struct file *filp) -{ - return tty_port_open(&saved_ifx_dev->tty_port, tty, filp); -} - -/** - * ifx_spi_close - called when our tty closes - * @tty: the tty being closed - * @filp: the file handle being closed - * - * Perform the close of the tty. We use the tty_port layer to do all - * our hard work. - */ -static void ifx_spi_close(struct tty_struct *tty, struct file *filp) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - tty_port_close(&ifx_dev->tty_port, tty, filp); - /* FIXME: should we do an ifx_spi_reset here ? */ -} - -/** - * ifx_decode_spi_header - decode received header - * @buffer: the received data - * @length: decoded length - * @more: decoded more flag - * @received_cts: status of cts we received - * - * Note how received_cts is handled -- if header is all F it is left - * the same as it was, if header is all 0 it is set to 0 otherwise it is - * taken from the incoming header. - * - * FIXME: endianness - */ -static int ifx_spi_decode_spi_header(unsigned char *buffer, int *length, - unsigned char *more, unsigned char *received_cts) -{ - u16 h1; - u16 h2; - u16 *in_buffer = (u16 *)buffer; - - h1 = *in_buffer; - h2 = *(in_buffer+1); - - if (h1 == 0 && h2 == 0) { - *received_cts = 0; - return IFX_SPI_HEADER_0; - } else if (h1 == 0xffff && h2 == 0xffff) { - /* spi_slave_cts remains as it was */ - return IFX_SPI_HEADER_F; - } - - *length = h1 & 0xfff; /* upper bits of byte are flags */ - *more = (buffer[1] >> IFX_SPI_MORE_BIT) & 1; - *received_cts = (buffer[3] >> IFX_SPI_CTS_BIT) & 1; - return 0; -} - -/** - * ifx_setup_spi_header - set header fields - * @txbuffer: pointer to start of SPI buffer - * @tx_count: bytes - * @more: indicate if more to follow - * - * Format up an SPI header for a transfer - * - * FIXME: endianness? - */ -static void ifx_spi_setup_spi_header(unsigned char *txbuffer, int tx_count, - unsigned char more) -{ - *(u16 *)(txbuffer) = tx_count; - *(u16 *)(txbuffer+2) = IFX_SPI_PAYLOAD_SIZE; - txbuffer[1] |= (more << IFX_SPI_MORE_BIT) & IFX_SPI_MORE_MASK; -} - -/** - * ifx_spi_wakeup_serial - SPI space made - * @port_data: our SPI device - * - * We have emptied the FIFO enough that we want to get more data - * queued into it. Poke the line discipline via tty_wakeup so that - * it will feed us more bits - */ -static void ifx_spi_wakeup_serial(struct ifx_spi_device *ifx_dev) -{ - struct tty_struct *tty; - - tty = tty_port_tty_get(&ifx_dev->tty_port); - if (!tty) - return; - tty_wakeup(tty); - tty_kref_put(tty); -} - -/** - * ifx_spi_prepare_tx_buffer - prepare transmit frame - * @ifx_dev: our SPI device - * - * The transmit buffr needs a header and various other bits of - * information followed by as much data as we can pull from the FIFO - * and transfer. This function formats up a suitable buffer in the - * ifx_dev->tx_buffer - * - * FIXME: performance - should we wake the tty when the queue is half - * empty ? - */ -static int ifx_spi_prepare_tx_buffer(struct ifx_spi_device *ifx_dev) -{ - int temp_count; - int queue_length; - int tx_count; - unsigned char *tx_buffer; - - tx_buffer = ifx_dev->tx_buffer; - memset(tx_buffer, 0, IFX_SPI_TRANSFER_SIZE); - - /* make room for required SPI header */ - tx_buffer += IFX_SPI_HEADER_OVERHEAD; - tx_count = IFX_SPI_HEADER_OVERHEAD; - - /* clear to signal no more data if this turns out to be the - * last buffer sent in a sequence */ - ifx_dev->spi_more = 0; - - /* if modem cts is set, just send empty buffer */ - if (!ifx_dev->spi_slave_cts) { - /* see if there's tx data */ - queue_length = kfifo_len(&ifx_dev->tx_fifo); - if (queue_length != 0) { - /* data to mux -- see if there's room for it */ - temp_count = min(queue_length, IFX_SPI_PAYLOAD_SIZE); - temp_count = kfifo_out_locked(&ifx_dev->tx_fifo, - tx_buffer, temp_count, - &ifx_dev->fifo_lock); - - /* update buffer pointer and data count in message */ - tx_buffer += temp_count; - tx_count += temp_count; - if (temp_count == queue_length) - /* poke port to get more data */ - ifx_spi_wakeup_serial(ifx_dev); - else /* more data in port, use next SPI message */ - ifx_dev->spi_more = 1; - } - } - /* have data and info for header -- set up SPI header in buffer */ - /* spi header needs payload size, not entire buffer size */ - ifx_spi_setup_spi_header(ifx_dev->tx_buffer, - tx_count-IFX_SPI_HEADER_OVERHEAD, - ifx_dev->spi_more); - /* swap actual data in the buffer */ - swap_buf((u16 *)(ifx_dev->tx_buffer), tx_count, - &ifx_dev->tx_buffer[IFX_SPI_TRANSFER_SIZE]); - return tx_count; -} - -/** - * ifx_spi_write - line discipline write - * @tty: our tty device - * @buf: pointer to buffer to write (kernel space) - * @count: size of buffer - * - * Write the characters we have been given into the FIFO. If the device - * is not active then activate it, when the SRDY line is asserted back - * this will commence I/O - */ -static int ifx_spi_write(struct tty_struct *tty, const unsigned char *buf, - int count) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - unsigned char *tmp_buf = (unsigned char *)buf; - int tx_count = kfifo_in_locked(&ifx_dev->tx_fifo, tmp_buf, count, - &ifx_dev->fifo_lock); - mrdy_assert(ifx_dev); - return tx_count; -} - -/** - * ifx_spi_chars_in_buffer - line discipline helper - * @tty: our tty device - * - * Report how much data we can accept before we drop bytes. As we use - * a simple FIFO this is nice and easy. - */ -static int ifx_spi_write_room(struct tty_struct *tty) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - return IFX_SPI_FIFO_SIZE - kfifo_len(&ifx_dev->tx_fifo); -} - -/** - * ifx_spi_chars_in_buffer - line discipline helper - * @tty: our tty device - * - * Report how many characters we have buffered. In our case this is the - * number of bytes sitting in our transmit FIFO. - */ -static int ifx_spi_chars_in_buffer(struct tty_struct *tty) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - return kfifo_len(&ifx_dev->tx_fifo); -} - -/** - * ifx_port_hangup - * @port: our tty port - * - * tty port hang up. Called when tty_hangup processing is invoked either - * by loss of carrier, or by software (eg vhangup). Serialized against - * activate/shutdown by the tty layer. - */ -static void ifx_spi_hangup(struct tty_struct *tty) -{ - struct ifx_spi_device *ifx_dev = tty->driver_data; - tty_port_hangup(&ifx_dev->tty_port); -} - -/** - * ifx_port_activate - * @port: our tty port - * - * tty port activate method - called for first open. Serialized - * with hangup and shutdown by the tty layer. - */ -static int ifx_port_activate(struct tty_port *port, struct tty_struct *tty) -{ - struct ifx_spi_device *ifx_dev = - container_of(port, struct ifx_spi_device, tty_port); - - /* clear any old data; can't do this in 'close' */ - kfifo_reset(&ifx_dev->tx_fifo); - - /* put port data into this tty */ - tty->driver_data = ifx_dev; - - /* allows flip string push from int context */ - tty->low_latency = 1; - - return 0; -} - -/** - * ifx_port_shutdown - * @port: our tty port - * - * tty port shutdown method - called for last port close. Serialized - * with hangup and activate by the tty layer. - */ -static void ifx_port_shutdown(struct tty_port *port) -{ - struct ifx_spi_device *ifx_dev = - container_of(port, struct ifx_spi_device, tty_port); - - mrdy_set_low(ifx_dev); - clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); - tasklet_kill(&ifx_dev->io_work_tasklet); -} - -static const struct tty_port_operations ifx_tty_port_ops = { - .activate = ifx_port_activate, - .shutdown = ifx_port_shutdown, -}; - -static const struct tty_operations ifx_spi_serial_ops = { - .open = ifx_spi_open, - .close = ifx_spi_close, - .write = ifx_spi_write, - .hangup = ifx_spi_hangup, - .write_room = ifx_spi_write_room, - .chars_in_buffer = ifx_spi_chars_in_buffer, - .tiocmget = ifx_spi_tiocmget, - .tiocmset = ifx_spi_tiocmset, -}; - -/** - * ifx_spi_insert_fip_string - queue received data - * @ifx_ser: our SPI device - * @chars: buffer we have received - * @size: number of chars reeived - * - * Queue bytes to the tty assuming the tty side is currently open. If - * not the discard the data. - */ -static void ifx_spi_insert_flip_string(struct ifx_spi_device *ifx_dev, - unsigned char *chars, size_t size) -{ - struct tty_struct *tty = tty_port_tty_get(&ifx_dev->tty_port); - if (!tty) - return; - tty_insert_flip_string(tty, chars, size); - tty_flip_buffer_push(tty); - tty_kref_put(tty); -} - -/** - * ifx_spi_complete - SPI transfer completed - * @ctx: our SPI device - * - * An SPI transfer has completed. Process any received data and kick off - * any further transmits we can commence. - */ -static void ifx_spi_complete(void *ctx) -{ - struct ifx_spi_device *ifx_dev = ctx; - struct tty_struct *tty; - struct tty_ldisc *ldisc = NULL; - int length; - int actual_length; - unsigned char more; - unsigned char cts; - int local_write_pending = 0; - int queue_length; - int srdy; - int decode_result; - - mrdy_set_low(ifx_dev); - - if (!ifx_dev->spi_msg.status) { - /* check header validity, get comm flags */ - swap_buf((u16 *)ifx_dev->rx_buffer, IFX_SPI_HEADER_OVERHEAD, - &ifx_dev->rx_buffer[IFX_SPI_HEADER_OVERHEAD]); - decode_result = ifx_spi_decode_spi_header(ifx_dev->rx_buffer, - &length, &more, &cts); - if (decode_result == IFX_SPI_HEADER_0) { - dev_dbg(&ifx_dev->spi_dev->dev, - "ignore input: invalid header 0"); - ifx_dev->spi_slave_cts = 0; - goto complete_exit; - } else if (decode_result == IFX_SPI_HEADER_F) { - dev_dbg(&ifx_dev->spi_dev->dev, - "ignore input: invalid header F"); - goto complete_exit; - } - - ifx_dev->spi_slave_cts = cts; - - actual_length = min((unsigned int)length, - ifx_dev->spi_msg.actual_length); - swap_buf((u16 *)(ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD), - actual_length, - &ifx_dev->rx_buffer[IFX_SPI_TRANSFER_SIZE]); - ifx_spi_insert_flip_string( - ifx_dev, - ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD, - (size_t)actual_length); - } else { - dev_dbg(&ifx_dev->spi_dev->dev, "SPI transfer error %d", - ifx_dev->spi_msg.status); - } - -complete_exit: - if (ifx_dev->write_pending) { - ifx_dev->write_pending = 0; - local_write_pending = 1; - } - - clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &(ifx_dev->flags)); - - queue_length = kfifo_len(&ifx_dev->tx_fifo); - srdy = gpio_get_value(ifx_dev->gpio.srdy); - if (!srdy) - ifx_spi_power_state_clear(ifx_dev, IFX_SPI_POWER_SRDY); - - /* schedule output if there is more to do */ - if (test_and_clear_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags)) - tasklet_schedule(&ifx_dev->io_work_tasklet); - else { - if (more || ifx_dev->spi_more || queue_length > 0 || - local_write_pending) { - if (ifx_dev->spi_slave_cts) { - if (more) - mrdy_assert(ifx_dev); - } else - mrdy_assert(ifx_dev); - } else { - /* - * poke line discipline driver if any for more data - * may or may not get more data to write - * for now, say not busy - */ - ifx_spi_power_state_clear(ifx_dev, - IFX_SPI_POWER_DATA_PENDING); - tty = tty_port_tty_get(&ifx_dev->tty_port); - if (tty) { - ldisc = tty_ldisc_ref(tty); - if (ldisc) { - ldisc->ops->write_wakeup(tty); - tty_ldisc_deref(ldisc); - } - tty_kref_put(tty); - } - } - } -} - -/** - * ifx_spio_io - I/O tasklet - * @data: our SPI device - * - * Queue data for transmission if possible and then kick off the - * transfer. - */ -static void ifx_spi_io(unsigned long data) -{ - int retval; - struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *) data; - - if (!test_and_set_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) { - if (ifx_dev->gpio.unack_srdy_int_nb > 0) - ifx_dev->gpio.unack_srdy_int_nb--; - - ifx_spi_prepare_tx_buffer(ifx_dev); - - spi_message_init(&ifx_dev->spi_msg); - INIT_LIST_HEAD(&ifx_dev->spi_msg.queue); - - ifx_dev->spi_msg.context = ifx_dev; - ifx_dev->spi_msg.complete = ifx_spi_complete; - - /* set up our spi transfer */ - /* note len is BYTES, not transfers */ - ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE; - ifx_dev->spi_xfer.cs_change = 0; - ifx_dev->spi_xfer.speed_hz = 12500000; - /* ifx_dev->spi_xfer.speed_hz = 390625; */ - ifx_dev->spi_xfer.bits_per_word = spi_b16 ? 16 : 8; - - ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer; - ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer; - - /* - * setup dma pointers - */ - if (ifx_dev->is_6160) { - ifx_dev->spi_msg.is_dma_mapped = 1; - ifx_dev->tx_dma = ifx_dev->tx_bus; - ifx_dev->rx_dma = ifx_dev->rx_bus; - ifx_dev->spi_xfer.tx_dma = ifx_dev->tx_dma; - ifx_dev->spi_xfer.rx_dma = ifx_dev->rx_dma; - } else { - ifx_dev->spi_msg.is_dma_mapped = 0; - ifx_dev->tx_dma = (dma_addr_t)0; - ifx_dev->rx_dma = (dma_addr_t)0; - ifx_dev->spi_xfer.tx_dma = (dma_addr_t)0; - ifx_dev->spi_xfer.rx_dma = (dma_addr_t)0; - } - - spi_message_add_tail(&ifx_dev->spi_xfer, &ifx_dev->spi_msg); - - /* Assert MRDY. This may have already been done by the write - * routine. - */ - mrdy_assert(ifx_dev); - - retval = spi_async(ifx_dev->spi_dev, &ifx_dev->spi_msg); - if (retval) { - clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, - &ifx_dev->flags); - tasklet_schedule(&ifx_dev->io_work_tasklet); - return; - } - } else - ifx_dev->write_pending = 1; -} - -/** - * ifx_spi_free_port - free up the tty side - * @ifx_dev: IFX device going away - * - * Unregister and free up a port when the device goes away - */ -static void ifx_spi_free_port(struct ifx_spi_device *ifx_dev) -{ - if (ifx_dev->tty_dev) - tty_unregister_device(tty_drv, ifx_dev->minor); - kfifo_free(&ifx_dev->tx_fifo); -} - -/** - * ifx_spi_create_port - create a new port - * @ifx_dev: our spi device - * - * Allocate and initialise the tty port that goes with this interface - * and add it to the tty layer so that it can be opened. - */ -static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev) -{ - int ret = 0; - struct tty_port *pport = &ifx_dev->tty_port; - - spin_lock_init(&ifx_dev->fifo_lock); - lockdep_set_class_and_subclass(&ifx_dev->fifo_lock, - &ifx_spi_key, 0); - - if (kfifo_alloc(&ifx_dev->tx_fifo, IFX_SPI_FIFO_SIZE, GFP_KERNEL)) { - ret = -ENOMEM; - goto error_ret; - } - - pport->ops = &ifx_tty_port_ops; - tty_port_init(pport); - ifx_dev->minor = IFX_SPI_TTY_ID; - ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor, - &ifx_dev->spi_dev->dev); - if (IS_ERR(ifx_dev->tty_dev)) { - dev_dbg(&ifx_dev->spi_dev->dev, - "%s: registering tty device failed", __func__); - ret = PTR_ERR(ifx_dev->tty_dev); - goto error_ret; - } - return 0; - -error_ret: - ifx_spi_free_port(ifx_dev); - return ret; -} - -/** - * ifx_spi_handle_srdy - handle SRDY - * @ifx_dev: device asserting SRDY - * - * Check our device state and see what we need to kick off when SRDY - * is asserted. This usually means killing the timer and firing off the - * I/O processing. - */ -static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev) -{ - if (test_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags)) { - del_timer_sync(&ifx_dev->spi_timer); - clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); - } - - ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_SRDY); - - if (!test_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) - tasklet_schedule(&ifx_dev->io_work_tasklet); - else - set_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags); -} - -/** - * ifx_spi_srdy_interrupt - SRDY asserted - * @irq: our IRQ number - * @dev: our ifx device - * - * The modem asserted SRDY. Handle the srdy event - */ -static irqreturn_t ifx_spi_srdy_interrupt(int irq, void *dev) -{ - struct ifx_spi_device *ifx_dev = dev; - ifx_dev->gpio.unack_srdy_int_nb++; - ifx_spi_handle_srdy(ifx_dev); - return IRQ_HANDLED; -} - -/** - * ifx_spi_reset_interrupt - Modem has changed reset state - * @irq: interrupt number - * @dev: our device pointer - * - * The modem has either entered or left reset state. Check the GPIO - * line to see which. - * - * FIXME: review locking on MR_INPROGRESS versus - * parallel unsolicited reset/solicited reset - */ -static irqreturn_t ifx_spi_reset_interrupt(int irq, void *dev) -{ - struct ifx_spi_device *ifx_dev = dev; - int val = gpio_get_value(ifx_dev->gpio.reset_out); - int solreset = test_bit(MR_START, &ifx_dev->mdm_reset_state); - - if (val == 0) { - /* entered reset */ - set_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state); - if (!solreset) { - /* unsolicited reset */ - ifx_spi_ttyhangup(ifx_dev); - } - } else { - /* exited reset */ - clear_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state); - if (solreset) { - set_bit(MR_COMPLETE, &ifx_dev->mdm_reset_state); - wake_up(&ifx_dev->mdm_reset_wait); - } - } - return IRQ_HANDLED; -} - -/** - * ifx_spi_free_device - free device - * @ifx_dev: device to free - * - * Free the IFX device - */ -static void ifx_spi_free_device(struct ifx_spi_device *ifx_dev) -{ - ifx_spi_free_port(ifx_dev); - dma_free_coherent(&ifx_dev->spi_dev->dev, - IFX_SPI_TRANSFER_SIZE, - ifx_dev->tx_buffer, - ifx_dev->tx_bus); - dma_free_coherent(&ifx_dev->spi_dev->dev, - IFX_SPI_TRANSFER_SIZE, - ifx_dev->rx_buffer, - ifx_dev->rx_bus); -} - -/** - * ifx_spi_reset - reset modem - * @ifx_dev: modem to reset - * - * Perform a reset on the modem - */ -static int ifx_spi_reset(struct ifx_spi_device *ifx_dev) -{ - int ret; - /* - * set up modem power, reset - * - * delays are required on some platforms for the modem - * to reset properly - */ - set_bit(MR_START, &ifx_dev->mdm_reset_state); - gpio_set_value(ifx_dev->gpio.po, 0); - gpio_set_value(ifx_dev->gpio.reset, 0); - msleep(25); - gpio_set_value(ifx_dev->gpio.reset, 1); - msleep(1); - gpio_set_value(ifx_dev->gpio.po, 1); - msleep(1); - gpio_set_value(ifx_dev->gpio.po, 0); - ret = wait_event_timeout(ifx_dev->mdm_reset_wait, - test_bit(MR_COMPLETE, - &ifx_dev->mdm_reset_state), - IFX_RESET_TIMEOUT); - if (!ret) - dev_warn(&ifx_dev->spi_dev->dev, "Modem reset timeout: (state:%lx)", - ifx_dev->mdm_reset_state); - - ifx_dev->mdm_reset_state = 0; - return ret; -} - -/** - * ifx_spi_spi_probe - probe callback - * @spi: our possible matching SPI device - * - * Probe for a 6x60 modem on SPI bus. Perform any needed device and - * GPIO setup. - * - * FIXME: - * - Support for multiple devices - * - Split out MID specific GPIO handling eventually - */ - -static int ifx_spi_spi_probe(struct spi_device *spi) -{ - int ret; - int srdy; - struct ifx_modem_platform_data *pl_data = NULL; - struct ifx_spi_device *ifx_dev; - - if (saved_ifx_dev) { - dev_dbg(&spi->dev, "ignoring subsequent detection"); - return -ENODEV; - } - - /* initialize structure to hold our device variables */ - ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL); - if (!ifx_dev) { - dev_err(&spi->dev, "spi device allocation failed"); - return -ENOMEM; - } - saved_ifx_dev = ifx_dev; - ifx_dev->spi_dev = spi; - clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags); - spin_lock_init(&ifx_dev->write_lock); - spin_lock_init(&ifx_dev->power_lock); - ifx_dev->power_status = 0; - init_timer(&ifx_dev->spi_timer); - ifx_dev->spi_timer.function = ifx_spi_timeout; - ifx_dev->spi_timer.data = (unsigned long)ifx_dev; - ifx_dev->is_6160 = pl_data->is_6160; - - /* ensure SPI protocol flags are initialized to enable transfer */ - ifx_dev->spi_more = 0; - ifx_dev->spi_slave_cts = 0; - - /*initialize transfer and dma buffers */ - ifx_dev->tx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev, - IFX_SPI_TRANSFER_SIZE, - &ifx_dev->tx_bus, - GFP_KERNEL); - if (!ifx_dev->tx_buffer) { - dev_err(&spi->dev, "DMA-TX buffer allocation failed"); - ret = -ENOMEM; - goto error_ret; - } - ifx_dev->rx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev, - IFX_SPI_TRANSFER_SIZE, - &ifx_dev->rx_bus, - GFP_KERNEL); - if (!ifx_dev->rx_buffer) { - dev_err(&spi->dev, "DMA-RX buffer allocation failed"); - ret = -ENOMEM; - goto error_ret; - } - - /* initialize waitq for modem reset */ - init_waitqueue_head(&ifx_dev->mdm_reset_wait); - - spi_set_drvdata(spi, ifx_dev); - tasklet_init(&ifx_dev->io_work_tasklet, ifx_spi_io, - (unsigned long)ifx_dev); - - set_bit(IFX_SPI_STATE_PRESENT, &ifx_dev->flags); - - /* create our tty port */ - ret = ifx_spi_create_port(ifx_dev); - if (ret != 0) { - dev_err(&spi->dev, "create default tty port failed"); - goto error_ret; - } - - pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data; - if (pl_data) { - ifx_dev->gpio.reset = pl_data->rst_pmu; - ifx_dev->gpio.po = pl_data->pwr_on; - ifx_dev->gpio.mrdy = pl_data->mrdy; - ifx_dev->gpio.srdy = pl_data->srdy; - ifx_dev->gpio.reset_out = pl_data->rst_out; - } else { - dev_err(&spi->dev, "missing platform data!"); - ret = -ENODEV; - goto error_ret; - } - - dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d", - ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy, - ifx_dev->gpio.srdy, ifx_dev->gpio.reset_out); - - /* Configure gpios */ - ret = gpio_request(ifx_dev->gpio.reset, "ifxModem"); - if (ret < 0) { - dev_err(&spi->dev, "Unable to allocate GPIO%d (RESET)", - ifx_dev->gpio.reset); - goto error_ret; - } - ret += gpio_direction_output(ifx_dev->gpio.reset, 0); - ret += gpio_export(ifx_dev->gpio.reset, 1); - if (ret) { - dev_err(&spi->dev, "Unable to configure GPIO%d (RESET)", - ifx_dev->gpio.reset); - ret = -EBUSY; - goto error_ret2; - } - - ret = gpio_request(ifx_dev->gpio.po, "ifxModem"); - ret += gpio_direction_output(ifx_dev->gpio.po, 0); - ret += gpio_export(ifx_dev->gpio.po, 1); - if (ret) { - dev_err(&spi->dev, "Unable to configure GPIO%d (ON)", - ifx_dev->gpio.po); - ret = -EBUSY; - goto error_ret3; - } - - ret = gpio_request(ifx_dev->gpio.mrdy, "ifxModem"); - if (ret < 0) { - dev_err(&spi->dev, "Unable to allocate GPIO%d (MRDY)", - ifx_dev->gpio.mrdy); - goto error_ret3; - } - ret += gpio_export(ifx_dev->gpio.mrdy, 1); - ret += gpio_direction_output(ifx_dev->gpio.mrdy, 0); - if (ret) { - dev_err(&spi->dev, "Unable to configure GPIO%d (MRDY)", - ifx_dev->gpio.mrdy); - ret = -EBUSY; - goto error_ret4; - } - - ret = gpio_request(ifx_dev->gpio.srdy, "ifxModem"); - if (ret < 0) { - dev_err(&spi->dev, "Unable to allocate GPIO%d (SRDY)", - ifx_dev->gpio.srdy); - ret = -EBUSY; - goto error_ret4; - } - ret += gpio_export(ifx_dev->gpio.srdy, 1); - ret += gpio_direction_input(ifx_dev->gpio.srdy); - if (ret) { - dev_err(&spi->dev, "Unable to configure GPIO%d (SRDY)", - ifx_dev->gpio.srdy); - ret = -EBUSY; - goto error_ret5; - } - - ret = gpio_request(ifx_dev->gpio.reset_out, "ifxModem"); - if (ret < 0) { - dev_err(&spi->dev, "Unable to allocate GPIO%d (RESET_OUT)", - ifx_dev->gpio.reset_out); - goto error_ret5; - } - ret += gpio_export(ifx_dev->gpio.reset_out, 1); - ret += gpio_direction_input(ifx_dev->gpio.reset_out); - if (ret) { - dev_err(&spi->dev, "Unable to configure GPIO%d (RESET_OUT)", - ifx_dev->gpio.reset_out); - ret = -EBUSY; - goto error_ret6; - } - - ret = request_irq(gpio_to_irq(ifx_dev->gpio.reset_out), - ifx_spi_reset_interrupt, - IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, DRVNAME, - (void *)ifx_dev); - if (ret) { - dev_err(&spi->dev, "Unable to get irq %x\n", - gpio_to_irq(ifx_dev->gpio.reset_out)); - goto error_ret6; - } - - ret = ifx_spi_reset(ifx_dev); - - ret = request_irq(gpio_to_irq(ifx_dev->gpio.srdy), - ifx_spi_srdy_interrupt, - IRQF_TRIGGER_RISING, DRVNAME, - (void *)ifx_dev); - if (ret) { - dev_err(&spi->dev, "Unable to get irq %x", - gpio_to_irq(ifx_dev->gpio.srdy)); - goto error_ret7; - } - - /* set pm runtime power state and register with power system */ - pm_runtime_set_active(&spi->dev); - pm_runtime_enable(&spi->dev); - - /* handle case that modem is already signaling SRDY */ - /* no outgoing tty open at this point, this just satisfies the - * modem's read and should reset communication properly - */ - srdy = gpio_get_value(ifx_dev->gpio.srdy); - - if (srdy) { - mrdy_assert(ifx_dev); - ifx_spi_handle_srdy(ifx_dev); - } else - mrdy_set_low(ifx_dev); - return 0; - -error_ret7: - free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev); -error_ret6: - gpio_free(ifx_dev->gpio.srdy); -error_ret5: - gpio_free(ifx_dev->gpio.mrdy); -error_ret4: - gpio_free(ifx_dev->gpio.reset); -error_ret3: - gpio_free(ifx_dev->gpio.po); -error_ret2: - gpio_free(ifx_dev->gpio.reset_out); -error_ret: - ifx_spi_free_device(ifx_dev); - saved_ifx_dev = NULL; - return ret; -} - -/** - * ifx_spi_spi_remove - SPI device was removed - * @spi: SPI device - * - * FIXME: We should be shutting the device down here not in - * the module unload path. - */ - -static int ifx_spi_spi_remove(struct spi_device *spi) -{ - struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); - /* stop activity */ - tasklet_kill(&ifx_dev->io_work_tasklet); - /* free irq */ - free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev); - free_irq(gpio_to_irq(ifx_dev->gpio.srdy), (void *)ifx_dev); - - gpio_free(ifx_dev->gpio.srdy); - gpio_free(ifx_dev->gpio.mrdy); - gpio_free(ifx_dev->gpio.reset); - gpio_free(ifx_dev->gpio.po); - gpio_free(ifx_dev->gpio.reset_out); - - /* free allocations */ - ifx_spi_free_device(ifx_dev); - - saved_ifx_dev = NULL; - return 0; -} - -/** - * ifx_spi_spi_shutdown - called on SPI shutdown - * @spi: SPI device - * - * No action needs to be taken here - */ - -static void ifx_spi_spi_shutdown(struct spi_device *spi) -{ -} - -/* - * various suspends and resumes have nothing to do - * no hardware to save state for - */ - -/** - * ifx_spi_spi_suspend - suspend SPI on system suspend - * @dev: device being suspended - * - * Suspend the SPI side. No action needed on Intel MID platforms, may - * need extending for other systems. - */ -static int ifx_spi_spi_suspend(struct spi_device *spi, pm_message_t msg) -{ - return 0; -} - -/** - * ifx_spi_spi_resume - resume SPI side on system resume - * @dev: device being suspended - * - * Suspend the SPI side. No action needed on Intel MID platforms, may - * need extending for other systems. - */ -static int ifx_spi_spi_resume(struct spi_device *spi) -{ - return 0; -} - -/** - * ifx_spi_pm_suspend - suspend modem on system suspend - * @dev: device being suspended - * - * Suspend the modem. No action needed on Intel MID platforms, may - * need extending for other systems. - */ -static int ifx_spi_pm_suspend(struct device *dev) -{ - return 0; -} - -/** - * ifx_spi_pm_resume - resume modem on system resume - * @dev: device being suspended - * - * Allow the modem to resume. No action needed. - * - * FIXME: do we need to reset anything here ? - */ -static int ifx_spi_pm_resume(struct device *dev) -{ - return 0; -} - -/** - * ifx_spi_pm_runtime_resume - suspend modem - * @dev: device being suspended - * - * Allow the modem to resume. No action needed. - */ -static int ifx_spi_pm_runtime_resume(struct device *dev) -{ - return 0; -} - -/** - * ifx_spi_pm_runtime_suspend - suspend modem - * @dev: device being suspended - * - * Allow the modem to suspend and thus suspend to continue up the - * device tree. - */ -static int ifx_spi_pm_runtime_suspend(struct device *dev) -{ - return 0; -} - -/** - * ifx_spi_pm_runtime_idle - check if modem idle - * @dev: our device - * - * Check conditions and queue runtime suspend if idle. - */ -static int ifx_spi_pm_runtime_idle(struct device *dev) -{ - struct spi_device *spi = to_spi_device(dev); - struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); - - if (!ifx_dev->power_status) - pm_runtime_suspend(dev); - - return 0; -} - -static const struct dev_pm_ops ifx_spi_pm = { - .resume = ifx_spi_pm_resume, - .suspend = ifx_spi_pm_suspend, - .runtime_resume = ifx_spi_pm_runtime_resume, - .runtime_suspend = ifx_spi_pm_runtime_suspend, - .runtime_idle = ifx_spi_pm_runtime_idle -}; - -static const struct spi_device_id ifx_id_table[] = { - {"ifx6160", 0}, - {"ifx6260", 0}, - { } -}; -MODULE_DEVICE_TABLE(spi, ifx_id_table); - -/* spi operations */ -static const struct spi_driver ifx_spi_driver_6160 = { - .driver = { - .name = "ifx6160", - .bus = &spi_bus_type, - .pm = &ifx_spi_pm, - .owner = THIS_MODULE}, - .probe = ifx_spi_spi_probe, - .shutdown = ifx_spi_spi_shutdown, - .remove = __devexit_p(ifx_spi_spi_remove), - .suspend = ifx_spi_spi_suspend, - .resume = ifx_spi_spi_resume, - .id_table = ifx_id_table -}; - -/** - * ifx_spi_exit - module exit - * - * Unload the module. - */ - -static void __exit ifx_spi_exit(void) -{ - /* unregister */ - tty_unregister_driver(tty_drv); - spi_unregister_driver((void *)&ifx_spi_driver_6160); -} - -/** - * ifx_spi_init - module entry point - * - * Initialise the SPI and tty interfaces for the IFX SPI driver - * We need to initialize upper-edge spi driver after the tty - * driver because otherwise the spi probe will race - */ - -static int __init ifx_spi_init(void) -{ - int result; - - tty_drv = alloc_tty_driver(1); - if (!tty_drv) { - pr_err("%s: alloc_tty_driver failed", DRVNAME); - return -ENOMEM; - } - - tty_drv->magic = TTY_DRIVER_MAGIC; - tty_drv->owner = THIS_MODULE; - tty_drv->driver_name = DRVNAME; - tty_drv->name = TTYNAME; - tty_drv->minor_start = IFX_SPI_TTY_ID; - tty_drv->num = 1; - tty_drv->type = TTY_DRIVER_TYPE_SERIAL; - tty_drv->subtype = SERIAL_TYPE_NORMAL; - tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - tty_drv->init_termios = tty_std_termios; - - tty_set_operations(tty_drv, &ifx_spi_serial_ops); - - result = tty_register_driver(tty_drv); - if (result) { - pr_err("%s: tty_register_driver failed(%d)", - DRVNAME, result); - put_tty_driver(tty_drv); - return result; - } - - result = spi_register_driver((void *)&ifx_spi_driver_6160); - if (result) { - pr_err("%s: spi_register_driver failed(%d)", - DRVNAME, result); - tty_unregister_driver(tty_drv); - } - return result; -} - -module_init(ifx_spi_init); -module_exit(ifx_spi_exit); - -MODULE_AUTHOR("Intel"); -MODULE_DESCRIPTION("IFX6x60 spi driver"); -MODULE_LICENSE("GPL"); -MODULE_INFO(Version, "0.1-IFX6x60"); diff --git a/drivers/serial/ifx6x60.h b/drivers/serial/ifx6x60.h deleted file mode 100644 index deb7b8d977dc..000000000000 --- a/drivers/serial/ifx6x60.h +++ /dev/null @@ -1,129 +0,0 @@ -/**************************************************************************** - * - * Driver for the IFX spi modem. - * - * Copyright (C) 2009, 2010 Intel Corp - * Jim Stanley - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, - * USA - * - * - * - *****************************************************************************/ -#ifndef _IFX6X60_H -#define _IFX6X60_H - -#define DRVNAME "ifx6x60" -#define TTYNAME "ttyIFX" - -/* #define IFX_THROTTLE_CODE */ - -#define IFX_SPI_MAX_MINORS 1 -#define IFX_SPI_TRANSFER_SIZE 2048 -#define IFX_SPI_FIFO_SIZE 4096 - -#define IFX_SPI_HEADER_OVERHEAD 4 -#define IFX_RESET_TIMEOUT msecs_to_jiffies(50) - -/* device flags bitfield definitions */ -#define IFX_SPI_STATE_PRESENT 0 -#define IFX_SPI_STATE_IO_IN_PROGRESS 1 -#define IFX_SPI_STATE_IO_READY 2 -#define IFX_SPI_STATE_TIMER_PENDING 3 - -/* flow control bitfields */ -#define IFX_SPI_DCD 0 -#define IFX_SPI_CTS 1 -#define IFX_SPI_DSR 2 -#define IFX_SPI_RI 3 -#define IFX_SPI_DTR 4 -#define IFX_SPI_RTS 5 -#define IFX_SPI_TX_FC 6 -#define IFX_SPI_RX_FC 7 -#define IFX_SPI_UPDATE 8 - -#define IFX_SPI_PAYLOAD_SIZE (IFX_SPI_TRANSFER_SIZE - \ - IFX_SPI_HEADER_OVERHEAD) - -#define IFX_SPI_IRQ_TYPE DETECT_EDGE_RISING -#define IFX_SPI_GPIO_TARGET 0 -#define IFX_SPI_GPIO0 0x105 - -#define IFX_SPI_STATUS_TIMEOUT (2000*HZ) - -/* values for bits in power status byte */ -#define IFX_SPI_POWER_DATA_PENDING 1 -#define IFX_SPI_POWER_SRDY 2 - -struct ifx_spi_device { - /* Our SPI device */ - struct spi_device *spi_dev; - - /* Port specific data */ - struct kfifo tx_fifo; - spinlock_t fifo_lock; - unsigned long signal_state; - - /* TTY Layer logic */ - struct tty_port tty_port; - struct device *tty_dev; - int minor; - - /* Low level I/O work */ - struct tasklet_struct io_work_tasklet; - unsigned long flags; - dma_addr_t rx_dma; - dma_addr_t tx_dma; - - int is_6160; /* Modem type */ - - spinlock_t write_lock; - int write_pending; - spinlock_t power_lock; - unsigned char power_status; - - unsigned char *rx_buffer; - unsigned char *tx_buffer; - dma_addr_t rx_bus; - dma_addr_t tx_bus; - unsigned char spi_more; - unsigned char spi_slave_cts; - - struct timer_list spi_timer; - - struct spi_message spi_msg; - struct spi_transfer spi_xfer; - - struct { - /* gpio lines */ - unsigned short srdy; /* slave-ready gpio */ - unsigned short mrdy; /* master-ready gpio */ - unsigned short reset; /* modem-reset gpio */ - unsigned short po; /* modem-on gpio */ - unsigned short reset_out; /* modem-in-reset gpio */ - /* state/stats */ - int unack_srdy_int_nb; - } gpio; - - /* modem reset */ - unsigned long mdm_reset_state; -#define MR_START 0 -#define MR_INPROGRESS 1 -#define MR_COMPLETE 2 - wait_queue_head_t mdm_reset_wait; -}; - -#endif /* _IFX6X60_H */ diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c deleted file mode 100644 index dfcf4b1878aa..000000000000 --- a/drivers/serial/imx.c +++ /dev/null @@ -1,1380 +0,0 @@ -/* - * linux/drivers/serial/imx.c - * - * Driver for Motorola IMX serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Author: Sascha Hauer - * Copyright (C) 2004 Pengutronix - * - * Copyright (C) 2009 emlix GmbH - * Author: Fabian Godehardt (added IrDA support for iMX) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * [29-Mar-2005] Mike Lee - * Added hardware handshake - */ - -#if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* Register definitions */ -#define URXD0 0x0 /* Receiver Register */ -#define URTX0 0x40 /* Transmitter Register */ -#define UCR1 0x80 /* Control Register 1 */ -#define UCR2 0x84 /* Control Register 2 */ -#define UCR3 0x88 /* Control Register 3 */ -#define UCR4 0x8c /* Control Register 4 */ -#define UFCR 0x90 /* FIFO Control Register */ -#define USR1 0x94 /* Status Register 1 */ -#define USR2 0x98 /* Status Register 2 */ -#define UESC 0x9c /* Escape Character Register */ -#define UTIM 0xa0 /* Escape Timer Register */ -#define UBIR 0xa4 /* BRM Incremental Register */ -#define UBMR 0xa8 /* BRM Modulator Register */ -#define UBRC 0xac /* Baud Rate Count Register */ -#define MX2_ONEMS 0xb0 /* One Millisecond register */ -#define UTS (cpu_is_mx1() ? 0xd0 : 0xb4) /* UART Test Register */ - -/* UART Control Register Bit Fields.*/ -#define URXD_CHARRDY (1<<15) -#define URXD_ERR (1<<14) -#define URXD_OVRRUN (1<<13) -#define URXD_FRMERR (1<<12) -#define URXD_BRK (1<<11) -#define URXD_PRERR (1<<10) -#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */ -#define UCR1_ADBR (1<<14) /* Auto detect baud rate */ -#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ -#define UCR1_IDEN (1<<12) /* Idle condition interrupt */ -#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ -#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ -#define UCR1_IREN (1<<7) /* Infrared interface enable */ -#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ -#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ -#define UCR1_SNDBRK (1<<4) /* Send break */ -#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ -#define MX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, mx1 only */ -#define UCR1_DOZE (1<<1) /* Doze */ -#define UCR1_UARTEN (1<<0) /* UART enabled */ -#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ -#define UCR2_IRTS (1<<14) /* Ignore RTS pin */ -#define UCR2_CTSC (1<<13) /* CTS pin control */ -#define UCR2_CTS (1<<12) /* Clear to send */ -#define UCR2_ESCEN (1<<11) /* Escape enable */ -#define UCR2_PREN (1<<8) /* Parity enable */ -#define UCR2_PROE (1<<7) /* Parity odd/even */ -#define UCR2_STPB (1<<6) /* Stop */ -#define UCR2_WS (1<<5) /* Word size */ -#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ -#define UCR2_TXEN (1<<2) /* Transmitter enabled */ -#define UCR2_RXEN (1<<1) /* Receiver enabled */ -#define UCR2_SRST (1<<0) /* SW reset */ -#define UCR3_DTREN (1<<13) /* DTR interrupt enable */ -#define UCR3_PARERREN (1<<12) /* Parity enable */ -#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ -#define UCR3_DSR (1<<10) /* Data set ready */ -#define UCR3_DCD (1<<9) /* Data carrier detect */ -#define UCR3_RI (1<<8) /* Ring indicator */ -#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ -#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ -#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ -#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#define MX1_UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */ -#define MX1_UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */ -#define MX2_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */ -#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ -#define UCR3_BPEN (1<<0) /* Preset registers enable */ -#define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */ -#define UCR4_CTSTL_MASK 0x3F /* CTS trigger is 6 bits wide */ -#define UCR4_INVR (1<<9) /* Inverted infrared reception */ -#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ -#define UCR4_WKEN (1<<7) /* Wake interrupt enable */ -#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ -#define UCR4_IRSC (1<<5) /* IR special case */ -#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ -#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ -#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ -#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ -#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ -#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ -#define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7) -#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ -#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ -#define USR1_RTSS (1<<14) /* RTS pin status */ -#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */ -#define USR1_RTSD (1<<12) /* RTS delta */ -#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ -#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ -#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ -#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ -#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ -#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ -#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ -#define USR2_ADET (1<<15) /* Auto baud rate detect complete */ -#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ -#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ -#define USR2_IDLE (1<<12) /* Idle condition */ -#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ -#define USR2_WAKE (1<<7) /* Wake */ -#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ -#define USR2_TXDC (1<<3) /* Transmitter complete */ -#define USR2_BRCD (1<<2) /* Break condition */ -#define USR2_ORE (1<<1) /* Overrun error */ -#define USR2_RDR (1<<0) /* Recv data ready */ -#define UTS_FRCPERR (1<<13) /* Force parity error */ -#define UTS_LOOP (1<<12) /* Loop tx and rx */ -#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ -#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ -#define UTS_TXFULL (1<<4) /* TxFIFO full */ -#define UTS_RXFULL (1<<3) /* RxFIFO full */ -#define UTS_SOFTRST (1<<0) /* Software reset */ - -/* We've been assigned a range on the "Low-density serial ports" major */ -#define SERIAL_IMX_MAJOR 207 -#define MINOR_START 16 -#define DEV_NAME "ttymxc" -#define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS - -/* - * This determines how often we check the modem status signals - * for any change. They generally aren't connected to an IRQ - * so we have to poll them. We also check immediately before - * filling the TX fifo incase CTS has been dropped. - */ -#define MCTRL_TIMEOUT (250*HZ/1000) - -#define DRIVER_NAME "IMX-uart" - -#define UART_NR 8 - -struct imx_port { - struct uart_port port; - struct timer_list timer; - unsigned int old_status; - int txirq,rxirq,rtsirq; - unsigned int have_rtscts:1; - unsigned int use_irda:1; - unsigned int irda_inv_rx:1; - unsigned int irda_inv_tx:1; - unsigned short trcv_delay; /* transceiver delay */ - struct clk *clk; -}; - -#ifdef CONFIG_IRDA -#define USE_IRDA(sport) ((sport)->use_irda) -#else -#define USE_IRDA(sport) (0) -#endif - -/* - * Handle any change of modem status signal since we were last called. - */ -static void imx_mctrl_check(struct imx_port *sport) -{ - unsigned int status, changed; - - status = sport->port.ops->get_mctrl(&sport->port); - changed = status ^ sport->old_status; - - if (changed == 0) - return; - - sport->old_status = status; - - if (changed & TIOCM_RI) - sport->port.icount.rng++; - if (changed & TIOCM_DSR) - sport->port.icount.dsr++; - if (changed & TIOCM_CAR) - uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); - if (changed & TIOCM_CTS) - uart_handle_cts_change(&sport->port, status & TIOCM_CTS); - - wake_up_interruptible(&sport->port.state->port.delta_msr_wait); -} - -/* - * This is our per-port timeout handler, for checking the - * modem status signals. - */ -static void imx_timeout(unsigned long data) -{ - struct imx_port *sport = (struct imx_port *)data; - unsigned long flags; - - if (sport->port.state) { - spin_lock_irqsave(&sport->port.lock, flags); - imx_mctrl_check(sport); - spin_unlock_irqrestore(&sport->port.lock, flags); - - mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); - } -} - -/* - * interrupts disabled on entry - */ -static void imx_stop_tx(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long temp; - - if (USE_IRDA(sport)) { - /* half duplex - wait for end of transmission */ - int n = 256; - while ((--n > 0) && - !(readl(sport->port.membase + USR2) & USR2_TXDC)) { - udelay(5); - barrier(); - } - /* - * irda transceiver - wait a bit more to avoid - * cutoff, hardware dependent - */ - udelay(sport->trcv_delay); - - /* - * half duplex - reactivate receive mode, - * flush receive pipe echo crap - */ - if (readl(sport->port.membase + USR2) & USR2_TXDC) { - temp = readl(sport->port.membase + UCR1); - temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN); - writel(temp, sport->port.membase + UCR1); - - temp = readl(sport->port.membase + UCR4); - temp &= ~(UCR4_TCEN); - writel(temp, sport->port.membase + UCR4); - - while (readl(sport->port.membase + URXD0) & - URXD_CHARRDY) - barrier(); - - temp = readl(sport->port.membase + UCR1); - temp |= UCR1_RRDYEN; - writel(temp, sport->port.membase + UCR1); - - temp = readl(sport->port.membase + UCR4); - temp |= UCR4_DREN; - writel(temp, sport->port.membase + UCR4); - } - return; - } - - temp = readl(sport->port.membase + UCR1); - writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1); -} - -/* - * interrupts disabled on entry - */ -static void imx_stop_rx(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long temp; - - temp = readl(sport->port.membase + UCR2); - writel(temp &~ UCR2_RXEN, sport->port.membase + UCR2); -} - -/* - * Set the modem control timer to fire immediately. - */ -static void imx_enable_ms(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - - mod_timer(&sport->timer, jiffies); -} - -static inline void imx_transmit_buffer(struct imx_port *sport) -{ - struct circ_buf *xmit = &sport->port.state->xmit; - - while (!uart_circ_empty(xmit) && - !(readl(sport->port.membase + UTS) & UTS_TXFULL)) { - /* send xmit->buf[xmit->tail] - * out the port here */ - writel(xmit->buf[xmit->tail], sport->port.membase + URTX0); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - sport->port.icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&sport->port); - - if (uart_circ_empty(xmit)) - imx_stop_tx(&sport->port); -} - -/* - * interrupts disabled on entry - */ -static void imx_start_tx(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long temp; - - if (USE_IRDA(sport)) { - /* half duplex in IrDA mode; have to disable receive mode */ - temp = readl(sport->port.membase + UCR4); - temp &= ~(UCR4_DREN); - writel(temp, sport->port.membase + UCR4); - - temp = readl(sport->port.membase + UCR1); - temp &= ~(UCR1_RRDYEN); - writel(temp, sport->port.membase + UCR1); - } - - temp = readl(sport->port.membase + UCR1); - writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1); - - if (USE_IRDA(sport)) { - temp = readl(sport->port.membase + UCR1); - temp |= UCR1_TRDYEN; - writel(temp, sport->port.membase + UCR1); - - temp = readl(sport->port.membase + UCR4); - temp |= UCR4_TCEN; - writel(temp, sport->port.membase + UCR4); - } - - if (readl(sport->port.membase + UTS) & UTS_TXEMPTY) - imx_transmit_buffer(sport); -} - -static irqreturn_t imx_rtsint(int irq, void *dev_id) -{ - struct imx_port *sport = dev_id; - unsigned int val = readl(sport->port.membase + USR1) & USR1_RTSS; - unsigned long flags; - - spin_lock_irqsave(&sport->port.lock, flags); - - writel(USR1_RTSD, sport->port.membase + USR1); - uart_handle_cts_change(&sport->port, !!val); - wake_up_interruptible(&sport->port.state->port.delta_msr_wait); - - spin_unlock_irqrestore(&sport->port.lock, flags); - return IRQ_HANDLED; -} - -static irqreturn_t imx_txint(int irq, void *dev_id) -{ - struct imx_port *sport = dev_id; - struct circ_buf *xmit = &sport->port.state->xmit; - unsigned long flags; - - spin_lock_irqsave(&sport->port.lock,flags); - if (sport->port.x_char) - { - /* Send next char */ - writel(sport->port.x_char, sport->port.membase + URTX0); - goto out; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { - imx_stop_tx(&sport->port); - goto out; - } - - imx_transmit_buffer(sport); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&sport->port); - -out: - spin_unlock_irqrestore(&sport->port.lock,flags); - return IRQ_HANDLED; -} - -static irqreturn_t imx_rxint(int irq, void *dev_id) -{ - struct imx_port *sport = dev_id; - unsigned int rx,flg,ignored = 0; - struct tty_struct *tty = sport->port.state->port.tty; - unsigned long flags, temp; - - spin_lock_irqsave(&sport->port.lock,flags); - - while (readl(sport->port.membase + USR2) & USR2_RDR) { - flg = TTY_NORMAL; - sport->port.icount.rx++; - - rx = readl(sport->port.membase + URXD0); - - temp = readl(sport->port.membase + USR2); - if (temp & USR2_BRCD) { - writel(USR2_BRCD, sport->port.membase + USR2); - if (uart_handle_break(&sport->port)) - continue; - } - - if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) - continue; - - if (rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) { - if (rx & URXD_PRERR) - sport->port.icount.parity++; - else if (rx & URXD_FRMERR) - sport->port.icount.frame++; - if (rx & URXD_OVRRUN) - sport->port.icount.overrun++; - - if (rx & sport->port.ignore_status_mask) { - if (++ignored > 100) - goto out; - continue; - } - - rx &= sport->port.read_status_mask; - - if (rx & URXD_PRERR) - flg = TTY_PARITY; - else if (rx & URXD_FRMERR) - flg = TTY_FRAME; - if (rx & URXD_OVRRUN) - flg = TTY_OVERRUN; - -#ifdef SUPPORT_SYSRQ - sport->port.sysrq = 0; -#endif - } - - tty_insert_flip_char(tty, rx, flg); - } - -out: - spin_unlock_irqrestore(&sport->port.lock,flags); - tty_flip_buffer_push(tty); - return IRQ_HANDLED; -} - -static irqreturn_t imx_int(int irq, void *dev_id) -{ - struct imx_port *sport = dev_id; - unsigned int sts; - - sts = readl(sport->port.membase + USR1); - - if (sts & USR1_RRDY) - imx_rxint(irq, dev_id); - - if (sts & USR1_TRDY && - readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN) - imx_txint(irq, dev_id); - - if (sts & USR1_RTSD) - imx_rtsint(irq, dev_id); - - return IRQ_HANDLED; -} - -/* - * Return TIOCSER_TEMT when transmitter is not busy. - */ -static unsigned int imx_tx_empty(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - - return (readl(sport->port.membase + USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0; -} - -/* - * We have a modem side uart, so the meanings of RTS and CTS are inverted. - */ -static unsigned int imx_get_mctrl(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned int tmp = TIOCM_DSR | TIOCM_CAR; - - if (readl(sport->port.membase + USR1) & USR1_RTSS) - tmp |= TIOCM_CTS; - - if (readl(sport->port.membase + UCR2) & UCR2_CTS) - tmp |= TIOCM_RTS; - - return tmp; -} - -static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long temp; - - temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS; - - if (mctrl & TIOCM_RTS) - temp |= UCR2_CTS; - - writel(temp, sport->port.membase + UCR2); -} - -/* - * Interrupts always disabled. - */ -static void imx_break_ctl(struct uart_port *port, int break_state) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long flags, temp; - - spin_lock_irqsave(&sport->port.lock, flags); - - temp = readl(sport->port.membase + UCR1) & ~UCR1_SNDBRK; - - if ( break_state != 0 ) - temp |= UCR1_SNDBRK; - - writel(temp, sport->port.membase + UCR1); - - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -#define TXTL 2 /* reset default */ -#define RXTL 1 /* reset default */ - -static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) -{ - unsigned int val; - unsigned int ufcr_rfdiv; - - /* set receiver / transmitter trigger level. - * RFDIV is set such way to satisfy requested uartclk value - */ - val = TXTL << 10 | RXTL; - ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2) - / sport->port.uartclk; - - if(!ufcr_rfdiv) - ufcr_rfdiv = 1; - - val |= UFCR_RFDIV_REG(ufcr_rfdiv); - - writel(val, sport->port.membase + UFCR); - - return 0; -} - -/* half the RX buffer size */ -#define CTSTL 16 - -static int imx_startup(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - int retval; - unsigned long flags, temp; - - imx_setup_ufcr(sport, 0); - - /* disable the DREN bit (Data Ready interrupt enable) before - * requesting IRQs - */ - temp = readl(sport->port.membase + UCR4); - - if (USE_IRDA(sport)) - temp |= UCR4_IRSC; - - /* set the trigger level for CTS */ - temp &= ~(UCR4_CTSTL_MASK<< UCR4_CTSTL_SHF); - temp |= CTSTL<< UCR4_CTSTL_SHF; - - writel(temp & ~UCR4_DREN, sport->port.membase + UCR4); - - if (USE_IRDA(sport)) { - /* reset fifo's and state machines */ - int i = 100; - temp = readl(sport->port.membase + UCR2); - temp &= ~UCR2_SRST; - writel(temp, sport->port.membase + UCR2); - while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && - (--i > 0)) { - udelay(1); - } - } - - /* - * Allocate the IRQ(s) i.MX1 has three interrupts whereas later - * chips only have one interrupt. - */ - if (sport->txirq > 0) { - retval = request_irq(sport->rxirq, imx_rxint, 0, - DRIVER_NAME, sport); - if (retval) - goto error_out1; - - retval = request_irq(sport->txirq, imx_txint, 0, - DRIVER_NAME, sport); - if (retval) - goto error_out2; - - /* do not use RTS IRQ on IrDA */ - if (!USE_IRDA(sport)) { - retval = request_irq(sport->rtsirq, imx_rtsint, - (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 : - IRQF_TRIGGER_FALLING | - IRQF_TRIGGER_RISING, - DRIVER_NAME, sport); - if (retval) - goto error_out3; - } - } else { - retval = request_irq(sport->port.irq, imx_int, 0, - DRIVER_NAME, sport); - if (retval) { - free_irq(sport->port.irq, sport); - goto error_out1; - } - } - - /* - * Finally, clear and enable interrupts - */ - writel(USR1_RTSD, sport->port.membase + USR1); - - temp = readl(sport->port.membase + UCR1); - temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN; - - if (USE_IRDA(sport)) { - temp |= UCR1_IREN; - temp &= ~(UCR1_RTSDEN); - } - - writel(temp, sport->port.membase + UCR1); - - temp = readl(sport->port.membase + UCR2); - temp |= (UCR2_RXEN | UCR2_TXEN); - writel(temp, sport->port.membase + UCR2); - - if (USE_IRDA(sport)) { - /* clear RX-FIFO */ - int i = 64; - while ((--i > 0) && - (readl(sport->port.membase + URXD0) & URXD_CHARRDY)) { - barrier(); - } - } - - if (!cpu_is_mx1()) { - temp = readl(sport->port.membase + UCR3); - temp |= MX2_UCR3_RXDMUXSEL; - writel(temp, sport->port.membase + UCR3); - } - - if (USE_IRDA(sport)) { - temp = readl(sport->port.membase + UCR4); - if (sport->irda_inv_rx) - temp |= UCR4_INVR; - else - temp &= ~(UCR4_INVR); - writel(temp | UCR4_DREN, sport->port.membase + UCR4); - - temp = readl(sport->port.membase + UCR3); - if (sport->irda_inv_tx) - temp |= UCR3_INVT; - else - temp &= ~(UCR3_INVT); - writel(temp, sport->port.membase + UCR3); - } - - /* - * Enable modem status interrupts - */ - spin_lock_irqsave(&sport->port.lock,flags); - imx_enable_ms(&sport->port); - spin_unlock_irqrestore(&sport->port.lock,flags); - - if (USE_IRDA(sport)) { - struct imxuart_platform_data *pdata; - pdata = sport->port.dev->platform_data; - sport->irda_inv_rx = pdata->irda_inv_rx; - sport->irda_inv_tx = pdata->irda_inv_tx; - sport->trcv_delay = pdata->transceiver_delay; - if (pdata->irda_enable) - pdata->irda_enable(1); - } - - return 0; - -error_out3: - if (sport->txirq) - free_irq(sport->txirq, sport); -error_out2: - if (sport->rxirq) - free_irq(sport->rxirq, sport); -error_out1: - return retval; -} - -static void imx_shutdown(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long temp; - - temp = readl(sport->port.membase + UCR2); - temp &= ~(UCR2_TXEN); - writel(temp, sport->port.membase + UCR2); - - if (USE_IRDA(sport)) { - struct imxuart_platform_data *pdata; - pdata = sport->port.dev->platform_data; - if (pdata->irda_enable) - pdata->irda_enable(0); - } - - /* - * Stop our timer. - */ - del_timer_sync(&sport->timer); - - /* - * Free the interrupts - */ - if (sport->txirq > 0) { - if (!USE_IRDA(sport)) - free_irq(sport->rtsirq, sport); - free_irq(sport->txirq, sport); - free_irq(sport->rxirq, sport); - } else - free_irq(sport->port.irq, sport); - - /* - * Disable all interrupts, port and break condition. - */ - - temp = readl(sport->port.membase + UCR1); - temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN); - if (USE_IRDA(sport)) - temp &= ~(UCR1_IREN); - - writel(temp, sport->port.membase + UCR1); -} - -static void -imx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct imx_port *sport = (struct imx_port *)port; - unsigned long flags; - unsigned int ucr2, old_ucr1, old_txrxen, baud, quot; - unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; - unsigned int div, ufcr; - unsigned long num, denom; - uint64_t tdiv64; - - /* - * If we don't support modem control lines, don't allow - * these to be set. - */ - if (0) { - termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR); - termios->c_cflag |= CLOCAL; - } - - /* - * We only support CS7 and CS8. - */ - while ((termios->c_cflag & CSIZE) != CS7 && - (termios->c_cflag & CSIZE) != CS8) { - termios->c_cflag &= ~CSIZE; - termios->c_cflag |= old_csize; - old_csize = CS8; - } - - if ((termios->c_cflag & CSIZE) == CS8) - ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS; - else - ucr2 = UCR2_SRST | UCR2_IRTS; - - if (termios->c_cflag & CRTSCTS) { - if( sport->have_rtscts ) { - ucr2 &= ~UCR2_IRTS; - ucr2 |= UCR2_CTSC; - } else { - termios->c_cflag &= ~CRTSCTS; - } - } - - if (termios->c_cflag & CSTOPB) - ucr2 |= UCR2_STPB; - if (termios->c_cflag & PARENB) { - ucr2 |= UCR2_PREN; - if (termios->c_cflag & PARODD) - ucr2 |= UCR2_PROE; - } - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); - quot = uart_get_divisor(port, baud); - - spin_lock_irqsave(&sport->port.lock, flags); - - sport->port.read_status_mask = 0; - if (termios->c_iflag & INPCK) - sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR); - if (termios->c_iflag & (BRKINT | PARMRK)) - sport->port.read_status_mask |= URXD_BRK; - - /* - * Characters to ignore - */ - sport->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= URXD_PRERR; - if (termios->c_iflag & IGNBRK) { - sport->port.ignore_status_mask |= URXD_BRK; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= URXD_OVRRUN; - } - - del_timer_sync(&sport->timer); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * disable interrupts and drain transmitter - */ - old_ucr1 = readl(sport->port.membase + UCR1); - writel(old_ucr1 & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN), - sport->port.membase + UCR1); - - while ( !(readl(sport->port.membase + USR2) & USR2_TXDC)) - barrier(); - - /* then, disable everything */ - old_txrxen = readl(sport->port.membase + UCR2); - writel(old_txrxen & ~( UCR2_TXEN | UCR2_RXEN), - sport->port.membase + UCR2); - old_txrxen &= (UCR2_TXEN | UCR2_RXEN); - - if (USE_IRDA(sport)) { - /* - * use maximum available submodule frequency to - * avoid missing short pulses due to low sampling rate - */ - div = 1; - } else { - div = sport->port.uartclk / (baud * 16); - if (div > 7) - div = 7; - if (!div) - div = 1; - } - - rational_best_approximation(16 * div * baud, sport->port.uartclk, - 1 << 16, 1 << 16, &num, &denom); - - tdiv64 = sport->port.uartclk; - tdiv64 *= num; - do_div(tdiv64, denom * 16 * div); - tty_termios_encode_baud_rate(termios, - (speed_t)tdiv64, (speed_t)tdiv64); - - num -= 1; - denom -= 1; - - ufcr = readl(sport->port.membase + UFCR); - ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div); - writel(ufcr, sport->port.membase + UFCR); - - writel(num, sport->port.membase + UBIR); - writel(denom, sport->port.membase + UBMR); - - if (!cpu_is_mx1()) - writel(sport->port.uartclk / div / 1000, - sport->port.membase + MX2_ONEMS); - - writel(old_ucr1, sport->port.membase + UCR1); - - /* set the parity, stop bits and data size */ - writel(ucr2 | old_txrxen, sport->port.membase + UCR2); - - if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) - imx_enable_ms(&sport->port); - - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -static const char *imx_type(struct uart_port *port) -{ - struct imx_port *sport = (struct imx_port *)port; - - return sport->port.type == PORT_IMX ? "IMX" : NULL; -} - -/* - * Release the memory region(s) being used by 'port'. - */ -static void imx_release_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - struct resource *mmres; - - mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mmres->start, mmres->end - mmres->start + 1); -} - -/* - * Request the memory region(s) being used by 'port'. - */ -static int imx_request_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - struct resource *mmres; - void *ret; - - mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mmres) - return -ENODEV; - - ret = request_mem_region(mmres->start, mmres->end - mmres->start + 1, - "imx-uart"); - - return ret ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void imx_config_port(struct uart_port *port, int flags) -{ - struct imx_port *sport = (struct imx_port *)port; - - if (flags & UART_CONFIG_TYPE && - imx_request_port(&sport->port) == 0) - sport->port.type = PORT_IMX; -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - * The only change we allow are to the flags and type, and - * even then only between PORT_IMX and PORT_UNKNOWN - */ -static int -imx_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - struct imx_port *sport = (struct imx_port *)port; - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX) - ret = -EINVAL; - if (sport->port.irq != ser->irq) - ret = -EINVAL; - if (ser->io_type != UPIO_MEM) - ret = -EINVAL; - if (sport->port.uartclk / 16 != ser->baud_base) - ret = -EINVAL; - if ((void *)sport->port.mapbase != ser->iomem_base) - ret = -EINVAL; - if (sport->port.iobase != ser->port) - ret = -EINVAL; - if (ser->hub6 != 0) - ret = -EINVAL; - return ret; -} - -static struct uart_ops imx_pops = { - .tx_empty = imx_tx_empty, - .set_mctrl = imx_set_mctrl, - .get_mctrl = imx_get_mctrl, - .stop_tx = imx_stop_tx, - .start_tx = imx_start_tx, - .stop_rx = imx_stop_rx, - .enable_ms = imx_enable_ms, - .break_ctl = imx_break_ctl, - .startup = imx_startup, - .shutdown = imx_shutdown, - .set_termios = imx_set_termios, - .type = imx_type, - .release_port = imx_release_port, - .request_port = imx_request_port, - .config_port = imx_config_port, - .verify_port = imx_verify_port, -}; - -static struct imx_port *imx_ports[UART_NR]; - -#ifdef CONFIG_SERIAL_IMX_CONSOLE -static void imx_console_putchar(struct uart_port *port, int ch) -{ - struct imx_port *sport = (struct imx_port *)port; - - while (readl(sport->port.membase + UTS) & UTS_TXFULL) - barrier(); - - writel(ch, sport->port.membase + URTX0); -} - -/* - * Interrupts are disabled on entering - */ -static void -imx_console_write(struct console *co, const char *s, unsigned int count) -{ - struct imx_port *sport = imx_ports[co->index]; - unsigned int old_ucr1, old_ucr2, ucr1; - - /* - * First, save UCR1/2 and then disable interrupts - */ - ucr1 = old_ucr1 = readl(sport->port.membase + UCR1); - old_ucr2 = readl(sport->port.membase + UCR2); - - if (cpu_is_mx1()) - ucr1 |= MX1_UCR1_UARTCLKEN; - ucr1 |= UCR1_UARTEN; - ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN); - - writel(ucr1, sport->port.membase + UCR1); - - writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2); - - uart_console_write(&sport->port, s, count, imx_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore UCR1/2 - */ - while (!(readl(sport->port.membase + USR2) & USR2_TXDC)); - - writel(old_ucr1, sport->port.membase + UCR1); - writel(old_ucr2, sport->port.membase + UCR2); -} - -/* - * If the port was already initialised (eg, by a boot loader), - * try to determine the current setup. - */ -static void __init -imx_console_get_options(struct imx_port *sport, int *baud, - int *parity, int *bits) -{ - - if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) { - /* ok, the port was enabled */ - unsigned int ucr2, ubir,ubmr, uartclk; - unsigned int baud_raw; - unsigned int ucfr_rfdiv; - - ucr2 = readl(sport->port.membase + UCR2); - - *parity = 'n'; - if (ucr2 & UCR2_PREN) { - if (ucr2 & UCR2_PROE) - *parity = 'o'; - else - *parity = 'e'; - } - - if (ucr2 & UCR2_WS) - *bits = 8; - else - *bits = 7; - - ubir = readl(sport->port.membase + UBIR) & 0xffff; - ubmr = readl(sport->port.membase + UBMR) & 0xffff; - - ucfr_rfdiv = (readl(sport->port.membase + UFCR) & UFCR_RFDIV) >> 7; - if (ucfr_rfdiv == 6) - ucfr_rfdiv = 7; - else - ucfr_rfdiv = 6 - ucfr_rfdiv; - - uartclk = clk_get_rate(sport->clk); - uartclk /= ucfr_rfdiv; - - { /* - * The next code provides exact computation of - * baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1)) - * without need of float support or long long division, - * which would be required to prevent 32bit arithmetic overflow - */ - unsigned int mul = ubir + 1; - unsigned int div = 16 * (ubmr + 1); - unsigned int rem = uartclk % div; - - baud_raw = (uartclk / div) * mul; - baud_raw += (rem * mul + div / 2) / div; - *baud = (baud_raw + 50) / 100 * 100; - } - - if(*baud != baud_raw) - printk(KERN_INFO "Serial: Console IMX rounded baud rate from %d to %d\n", - baud_raw, *baud); - } -} - -static int __init -imx_console_setup(struct console *co, char *options) -{ - struct imx_port *sport; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports)) - co->index = 0; - sport = imx_ports[co->index]; - if(sport == NULL) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - imx_console_get_options(sport, &baud, &parity, &bits); - - imx_setup_ufcr(sport, 0); - - return uart_set_options(&sport->port, co, baud, parity, bits, flow); -} - -static struct uart_driver imx_reg; -static struct console imx_console = { - .name = DEV_NAME, - .write = imx_console_write, - .device = uart_console_device, - .setup = imx_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &imx_reg, -}; - -#define IMX_CONSOLE &imx_console -#else -#define IMX_CONSOLE NULL -#endif - -static struct uart_driver imx_reg = { - .owner = THIS_MODULE, - .driver_name = DRIVER_NAME, - .dev_name = DEV_NAME, - .major = SERIAL_IMX_MAJOR, - .minor = MINOR_START, - .nr = ARRAY_SIZE(imx_ports), - .cons = IMX_CONSOLE, -}; - -static int serial_imx_suspend(struct platform_device *dev, pm_message_t state) -{ - struct imx_port *sport = platform_get_drvdata(dev); - - if (sport) - uart_suspend_port(&imx_reg, &sport->port); - - return 0; -} - -static int serial_imx_resume(struct platform_device *dev) -{ - struct imx_port *sport = platform_get_drvdata(dev); - - if (sport) - uart_resume_port(&imx_reg, &sport->port); - - return 0; -} - -static int serial_imx_probe(struct platform_device *pdev) -{ - struct imx_port *sport; - struct imxuart_platform_data *pdata; - void __iomem *base; - int ret = 0; - struct resource *res; - - sport = kzalloc(sizeof(*sport), GFP_KERNEL); - if (!sport) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENODEV; - goto free; - } - - base = ioremap(res->start, PAGE_SIZE); - if (!base) { - ret = -ENOMEM; - goto free; - } - - sport->port.dev = &pdev->dev; - sport->port.mapbase = res->start; - sport->port.membase = base; - sport->port.type = PORT_IMX, - sport->port.iotype = UPIO_MEM; - sport->port.irq = platform_get_irq(pdev, 0); - sport->rxirq = platform_get_irq(pdev, 0); - sport->txirq = platform_get_irq(pdev, 1); - sport->rtsirq = platform_get_irq(pdev, 2); - sport->port.fifosize = 32; - sport->port.ops = &imx_pops; - sport->port.flags = UPF_BOOT_AUTOCONF; - sport->port.line = pdev->id; - init_timer(&sport->timer); - sport->timer.function = imx_timeout; - sport->timer.data = (unsigned long)sport; - - sport->clk = clk_get(&pdev->dev, "uart"); - if (IS_ERR(sport->clk)) { - ret = PTR_ERR(sport->clk); - goto unmap; - } - clk_enable(sport->clk); - - sport->port.uartclk = clk_get_rate(sport->clk); - - imx_ports[pdev->id] = sport; - - pdata = pdev->dev.platform_data; - if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) - sport->have_rtscts = 1; - -#ifdef CONFIG_IRDA - if (pdata && (pdata->flags & IMXUART_IRDA)) - sport->use_irda = 1; -#endif - - if (pdata && pdata->init) { - ret = pdata->init(pdev); - if (ret) - goto clkput; - } - - ret = uart_add_one_port(&imx_reg, &sport->port); - if (ret) - goto deinit; - platform_set_drvdata(pdev, &sport->port); - - return 0; -deinit: - if (pdata && pdata->exit) - pdata->exit(pdev); -clkput: - clk_put(sport->clk); - clk_disable(sport->clk); -unmap: - iounmap(sport->port.membase); -free: - kfree(sport); - - return ret; -} - -static int serial_imx_remove(struct platform_device *pdev) -{ - struct imxuart_platform_data *pdata; - struct imx_port *sport = platform_get_drvdata(pdev); - - pdata = pdev->dev.platform_data; - - platform_set_drvdata(pdev, NULL); - - if (sport) { - uart_remove_one_port(&imx_reg, &sport->port); - clk_put(sport->clk); - } - - clk_disable(sport->clk); - - if (pdata && pdata->exit) - pdata->exit(pdev); - - iounmap(sport->port.membase); - kfree(sport); - - return 0; -} - -static struct platform_driver serial_imx_driver = { - .probe = serial_imx_probe, - .remove = serial_imx_remove, - - .suspend = serial_imx_suspend, - .resume = serial_imx_resume, - .driver = { - .name = "imx-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init imx_serial_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: IMX driver\n"); - - ret = uart_register_driver(&imx_reg); - if (ret) - return ret; - - ret = platform_driver_register(&serial_imx_driver); - if (ret != 0) - uart_unregister_driver(&imx_reg); - - return 0; -} - -static void __exit imx_serial_exit(void) -{ - platform_driver_unregister(&serial_imx_driver); - uart_unregister_driver(&imx_reg); -} - -module_init(imx_serial_init); -module_exit(imx_serial_exit); - -MODULE_AUTHOR("Sascha Hauer"); -MODULE_DESCRIPTION("IMX generic serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:imx-uart"); diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c deleted file mode 100644 index ee43efc7bdcc..000000000000 --- a/drivers/serial/ioc3_serial.c +++ /dev/null @@ -1,2199 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Silicon Graphics, Inc. All Rights Reserved. - */ - -/* - * This file contains a module version of the ioc3 serial driver. This - * includes all the support functions needed (support functions, etc.) - * and the serial driver itself. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Interesting things about the ioc3 - */ - -#define LOGICAL_PORTS 2 /* rs232(0) and rs422(1) */ -#define PORTS_PER_CARD 2 -#define LOGICAL_PORTS_PER_CARD (PORTS_PER_CARD * LOGICAL_PORTS) -#define MAX_CARDS 8 -#define MAX_LOGICAL_PORTS (LOGICAL_PORTS_PER_CARD * MAX_CARDS) - -/* determine given the sio_ir what port it applies to */ -#define GET_PORT_FROM_SIO_IR(_x) (_x & SIO_IR_SA) ? 0 : 1 - - -/* - * we have 2 logical ports (rs232, rs422) for each physical port - * evens are rs232, odds are rs422 - */ -#define GET_PHYSICAL_PORT(_x) ((_x) >> 1) -#define GET_LOGICAL_PORT(_x) ((_x) & 1) -#define IS_PHYSICAL_PORT(_x) !((_x) & 1) -#define IS_RS232(_x) !((_x) & 1) - -static unsigned int Num_of_ioc3_cards; -static unsigned int Submodule_slot; - -/* defining this will get you LOTS of great debug info */ -//#define DEBUG_INTERRUPTS -#define DPRINT_CONFIG(_x...) ; -//#define DPRINT_CONFIG(_x...) printk _x -#define NOT_PROGRESS() ; -//#define NOT_PROGRESS() printk("%s : fails %d\n", __func__, __LINE__) - -/* number of characters we want to transmit to the lower level at a time */ -#define MAX_CHARS 256 -#define FIFO_SIZE (MAX_CHARS-1) /* it's a uchar */ - -/* Device name we're using */ -#define DEVICE_NAME "ttySIOC" -#define DEVICE_MAJOR 204 -#define DEVICE_MINOR 116 - -/* flags for next_char_state */ -#define NCS_BREAK 0x1 -#define NCS_PARITY 0x2 -#define NCS_FRAMING 0x4 -#define NCS_OVERRUN 0x8 - -/* cause we need SOME parameters ... */ -#define MIN_BAUD_SUPPORTED 1200 -#define MAX_BAUD_SUPPORTED 115200 - -/* protocol types supported */ -#define PROTO_RS232 0 -#define PROTO_RS422 1 - -/* Notification types */ -#define N_DATA_READY 0x01 -#define N_OUTPUT_LOWAT 0x02 -#define N_BREAK 0x04 -#define N_PARITY_ERROR 0x08 -#define N_FRAMING_ERROR 0x10 -#define N_OVERRUN_ERROR 0x20 -#define N_DDCD 0x40 -#define N_DCTS 0x80 - -#define N_ALL_INPUT (N_DATA_READY | N_BREAK \ - | N_PARITY_ERROR | N_FRAMING_ERROR \ - | N_OVERRUN_ERROR | N_DDCD | N_DCTS) - -#define N_ALL_OUTPUT N_OUTPUT_LOWAT - -#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR \ - | N_OVERRUN_ERROR) - -#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK \ - | N_PARITY_ERROR | N_FRAMING_ERROR \ - | N_OVERRUN_ERROR | N_DDCD | N_DCTS) - -#define SER_CLK_SPEED(prediv) ((22000000 << 1) / prediv) -#define SER_DIVISOR(x, clk) (((clk) + (x) * 8) / ((x) * 16)) -#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div)) - -/* Some masks */ -#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \ - | UART_LCR_WLEN7 | UART_LCR_WLEN8) -#define LCR_MASK_STOP_BITS (UART_LCR_STOP) - -#define PENDING(_a, _p) (readl(&(_p)->vma->sio_ir) & (_a)->ic_enable) - -#define RING_BUF_SIZE 4096 -#define BUF_SIZE_BIT SBBR_L_SIZE -#define PROD_CONS_MASK PROD_CONS_PTR_4K - -#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4) - -/* driver specific - one per card */ -struct ioc3_card { - struct { - /* uart ports are allocated here */ - struct uart_port icp_uart_port[LOGICAL_PORTS]; - /* the ioc3_port used for this port */ - struct ioc3_port *icp_port; - } ic_port[PORTS_PER_CARD]; - /* currently enabled interrupts */ - uint32_t ic_enable; -}; - -/* Local port info for each IOC3 serial port */ -struct ioc3_port { - /* handy reference material */ - struct uart_port *ip_port; - struct ioc3_card *ip_card; - struct ioc3_driver_data *ip_idd; - struct ioc3_submodule *ip_is; - - /* pci mem addresses for this port */ - struct ioc3_serialregs __iomem *ip_serial_regs; - struct ioc3_uartregs __iomem *ip_uart_regs; - - /* Ring buffer page for this port */ - dma_addr_t ip_dma_ringbuf; - /* vaddr of ring buffer */ - struct ring_buffer *ip_cpu_ringbuf; - - /* Rings for this port */ - struct ring *ip_inring; - struct ring *ip_outring; - - /* Hook to port specific values */ - struct port_hooks *ip_hooks; - - spinlock_t ip_lock; - - /* Various rx/tx parameters */ - int ip_baud; - int ip_tx_lowat; - int ip_rx_timeout; - - /* Copy of notification bits */ - int ip_notify; - - /* Shadow copies of various registers so we don't need to PIO - * read them constantly - */ - uint32_t ip_sscr; - uint32_t ip_tx_prod; - uint32_t ip_rx_cons; - unsigned char ip_flags; -}; - -/* tx low water mark. We need to notify the driver whenever tx is getting - * close to empty so it can refill the tx buffer and keep things going. - * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll - * have no trouble getting in more chars in time (I certainly hope so). - */ -#define TX_LOWAT_LATENCY 1000 -#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY) -#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ) - -/* Flags per port */ -#define INPUT_HIGH 0x01 - /* used to signify that we have turned off the rx_high - * temporarily - we need to drain the fifo and don't - * want to get blasted with interrupts. - */ -#define DCD_ON 0x02 - /* DCD state is on */ -#define LOWAT_WRITTEN 0x04 -#define READ_ABORTED 0x08 - /* the read was aborted - used to avaoid infinate looping - * in the interrupt handler - */ -#define INPUT_ENABLE 0x10 - -/* Since each port has different register offsets and bitmasks - * for everything, we'll store those that we need in tables so we - * don't have to be constantly checking the port we are dealing with. - */ -struct port_hooks { - uint32_t intr_delta_dcd; - uint32_t intr_delta_cts; - uint32_t intr_tx_mt; - uint32_t intr_rx_timer; - uint32_t intr_rx_high; - uint32_t intr_tx_explicit; - uint32_t intr_clear; - uint32_t intr_all; - char rs422_select_pin; -}; - -static struct port_hooks hooks_array[PORTS_PER_CARD] = { - /* values for port A */ - { - .intr_delta_dcd = SIO_IR_SA_DELTA_DCD, - .intr_delta_cts = SIO_IR_SA_DELTA_CTS, - .intr_tx_mt = SIO_IR_SA_TX_MT, - .intr_rx_timer = SIO_IR_SA_RX_TIMER, - .intr_rx_high = SIO_IR_SA_RX_HIGH, - .intr_tx_explicit = SIO_IR_SA_TX_EXPLICIT, - .intr_clear = (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL - | SIO_IR_SA_RX_HIGH - | SIO_IR_SA_RX_TIMER - | SIO_IR_SA_DELTA_DCD - | SIO_IR_SA_DELTA_CTS - | SIO_IR_SA_INT - | SIO_IR_SA_TX_EXPLICIT - | SIO_IR_SA_MEMERR), - .intr_all = SIO_IR_SA, - .rs422_select_pin = GPPR_UARTA_MODESEL_PIN, - }, - - /* values for port B */ - { - .intr_delta_dcd = SIO_IR_SB_DELTA_DCD, - .intr_delta_cts = SIO_IR_SB_DELTA_CTS, - .intr_tx_mt = SIO_IR_SB_TX_MT, - .intr_rx_timer = SIO_IR_SB_RX_TIMER, - .intr_rx_high = SIO_IR_SB_RX_HIGH, - .intr_tx_explicit = SIO_IR_SB_TX_EXPLICIT, - .intr_clear = (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL - | SIO_IR_SB_RX_HIGH - | SIO_IR_SB_RX_TIMER - | SIO_IR_SB_DELTA_DCD - | SIO_IR_SB_DELTA_CTS - | SIO_IR_SB_INT - | SIO_IR_SB_TX_EXPLICIT - | SIO_IR_SB_MEMERR), - .intr_all = SIO_IR_SB, - .rs422_select_pin = GPPR_UARTB_MODESEL_PIN, - } -}; - -struct ring_entry { - union { - struct { - uint32_t alldata; - uint32_t allsc; - } all; - struct { - char data[4]; /* data bytes */ - char sc[4]; /* status/control */ - } s; - } u; -}; - -/* Test the valid bits in any of the 4 sc chars using "allsc" member */ -#define RING_ANY_VALID \ - ((uint32_t)(RXSB_MODEM_VALID | RXSB_DATA_VALID) * 0x01010101) - -#define ring_sc u.s.sc -#define ring_data u.s.data -#define ring_allsc u.all.allsc - -/* Number of entries per ring buffer. */ -#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry)) - -/* An individual ring */ -struct ring { - struct ring_entry entries[ENTRIES_PER_RING]; -}; - -/* The whole enchilada */ -struct ring_buffer { - struct ring TX_A; - struct ring RX_A; - struct ring TX_B; - struct ring RX_B; -}; - -/* Get a ring from a port struct */ -#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh) - -/* for Infinite loop detection */ -#define MAXITER 10000000 - - -/** - * set_baud - Baud rate setting code - * @port: port to set - * @baud: baud rate to use - */ -static int set_baud(struct ioc3_port *port, int baud) -{ - int divisor; - int actual_baud; - int diff; - int lcr, prediv; - struct ioc3_uartregs __iomem *uart; - - for (prediv = 6; prediv < 64; prediv++) { - divisor = SER_DIVISOR(baud, SER_CLK_SPEED(prediv)); - if (!divisor) - continue; /* invalid divisor */ - actual_baud = DIVISOR_TO_BAUD(divisor, SER_CLK_SPEED(prediv)); - - diff = actual_baud - baud; - if (diff < 0) - diff = -diff; - - /* if we're within 1% we've found a match */ - if (diff * 100 <= actual_baud) - break; - } - - /* if the above loop completed, we didn't match - * the baud rate. give up. - */ - if (prediv == 64) { - NOT_PROGRESS(); - return 1; - } - - uart = port->ip_uart_regs; - lcr = readb(&uart->iu_lcr); - - writeb(lcr | UART_LCR_DLAB, &uart->iu_lcr); - writeb((unsigned char)divisor, &uart->iu_dll); - writeb((unsigned char)(divisor >> 8), &uart->iu_dlm); - writeb((unsigned char)prediv, &uart->iu_scr); - writeb((unsigned char)lcr, &uart->iu_lcr); - - return 0; -} - -/** - * get_ioc3_port - given a uart port, return the control structure - * @the_port: uart port to find - */ -static struct ioc3_port *get_ioc3_port(struct uart_port *the_port) -{ - struct ioc3_driver_data *idd = dev_get_drvdata(the_port->dev); - struct ioc3_card *card_ptr = idd->data[Submodule_slot]; - int ii, jj; - - if (!card_ptr) { - NOT_PROGRESS(); - return NULL; - } - for (ii = 0; ii < PORTS_PER_CARD; ii++) { - for (jj = 0; jj < LOGICAL_PORTS; jj++) { - if (the_port == &card_ptr->ic_port[ii].icp_uart_port[jj]) - return card_ptr->ic_port[ii].icp_port; - } - } - NOT_PROGRESS(); - return NULL; -} - -/** - * port_init - Initialize the sio and ioc3 hardware for a given port - * called per port from attach... - * @port: port to initialize - */ -static int inline port_init(struct ioc3_port *port) -{ - uint32_t sio_cr; - struct port_hooks *hooks = port->ip_hooks; - struct ioc3_uartregs __iomem *uart; - int reset_loop_counter = 0xfffff; - struct ioc3_driver_data *idd = port->ip_idd; - - /* Idle the IOC3 serial interface */ - writel(SSCR_RESET, &port->ip_serial_regs->sscr); - - /* Wait until any pending bus activity for this port has ceased */ - do { - sio_cr = readl(&idd->vma->sio_cr); - if (reset_loop_counter-- <= 0) { - printk(KERN_WARNING - "IOC3 unable to come out of reset" - " scr 0x%x\n", sio_cr); - return -1; - } - } while (!(sio_cr & SIO_CR_ARB_DIAG_IDLE) && - (((sio_cr &= SIO_CR_ARB_DIAG) == SIO_CR_ARB_DIAG_TXA) - || sio_cr == SIO_CR_ARB_DIAG_TXB - || sio_cr == SIO_CR_ARB_DIAG_RXA - || sio_cr == SIO_CR_ARB_DIAG_RXB)); - - /* Finish reset sequence */ - writel(0, &port->ip_serial_regs->sscr); - - /* Once RESET is done, reload cached tx_prod and rx_cons values - * and set rings to empty by making prod == cons - */ - port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; - writel(port->ip_tx_prod, &port->ip_serial_regs->stpir); - port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; - writel(port->ip_rx_cons | SRCIR_ARM, &port->ip_serial_regs->srcir); - - /* Disable interrupts for this 16550 */ - uart = port->ip_uart_regs; - writeb(0, &uart->iu_lcr); - writeb(0, &uart->iu_ier); - - /* Set the default baud */ - set_baud(port, port->ip_baud); - - /* Set line control to 8 bits no parity */ - writeb(UART_LCR_WLEN8 | 0, &uart->iu_lcr); - /* UART_LCR_STOP == 1 stop */ - - /* Enable the FIFOs */ - writeb(UART_FCR_ENABLE_FIFO, &uart->iu_fcr); - /* then reset 16550 FIFOs */ - writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, - &uart->iu_fcr); - - /* Clear modem control register */ - writeb(0, &uart->iu_mcr); - - /* Clear deltas in modem status register */ - writel(0, &port->ip_serial_regs->shadow); - - /* Only do this once per port pair */ - if (port->ip_hooks == &hooks_array[0]) { - unsigned long ring_pci_addr; - uint32_t __iomem *sbbr_l, *sbbr_h; - - sbbr_l = &idd->vma->sbbr_l; - sbbr_h = &idd->vma->sbbr_h; - ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf; - DPRINT_CONFIG(("%s: ring_pci_addr 0x%p\n", - __func__, (void *)ring_pci_addr)); - - writel((unsigned int)((uint64_t) ring_pci_addr >> 32), sbbr_h); - writel((unsigned int)ring_pci_addr | BUF_SIZE_BIT, sbbr_l); - } - - /* Set the receive timeout value to 10 msec */ - writel(SRTR_HZ / 100, &port->ip_serial_regs->srtr); - - /* Set rx threshold, enable DMA */ - /* Set high water mark at 3/4 of full ring */ - port->ip_sscr = (ENTRIES_PER_RING * 3 / 4); - - /* uart experiences pauses at high baud rate reducing actual - * throughput by 10% or so unless we enable high speed polling - * XXX when this hardware bug is resolved we should revert to - * normal polling speed - */ - port->ip_sscr |= SSCR_HIGH_SPD; - - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - - /* Disable and clear all serial related interrupt bits */ - port->ip_card->ic_enable &= ~hooks->intr_clear; - ioc3_disable(port->ip_is, idd, hooks->intr_clear); - ioc3_ack(port->ip_is, idd, hooks->intr_clear); - return 0; -} - -/** - * enable_intrs - enable interrupts - * @port: port to enable - * @mask: mask to use - */ -static void enable_intrs(struct ioc3_port *port, uint32_t mask) -{ - if ((port->ip_card->ic_enable & mask) != mask) { - port->ip_card->ic_enable |= mask; - ioc3_enable(port->ip_is, port->ip_idd, mask); - } -} - -/** - * local_open - local open a port - * @port: port to open - */ -static inline int local_open(struct ioc3_port *port) -{ - int spiniter = 0; - - port->ip_flags = INPUT_ENABLE; - - /* Pause the DMA interface if necessary */ - if (port->ip_sscr & SSCR_DMA_EN) { - writel(port->ip_sscr | SSCR_DMA_PAUSE, - &port->ip_serial_regs->sscr); - while ((readl(&port->ip_serial_regs->sscr) - & SSCR_PAUSE_STATE) == 0) { - spiniter++; - if (spiniter > MAXITER) { - NOT_PROGRESS(); - return -1; - } - } - } - - /* Reset the input fifo. If the uart received chars while the port - * was closed and DMA is not enabled, the uart may have a bunch of - * chars hanging around in its rx fifo which will not be discarded - * by rclr in the upper layer. We must get rid of them here. - */ - writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR, - &port->ip_uart_regs->iu_fcr); - - writeb(UART_LCR_WLEN8, &port->ip_uart_regs->iu_lcr); - /* UART_LCR_STOP == 1 stop */ - - /* Re-enable DMA, set default threshold to intr whenever there is - * data available. - */ - port->ip_sscr &= ~SSCR_RX_THRESHOLD; - port->ip_sscr |= 1; /* default threshold */ - - /* Plug in the new sscr. This implicitly clears the DMA_PAUSE - * flag if it was set above - */ - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - port->ip_tx_lowat = 1; - return 0; -} - -/** - * set_rx_timeout - Set rx timeout and threshold values. - * @port: port to use - * @timeout: timeout value in ticks - */ -static inline int set_rx_timeout(struct ioc3_port *port, int timeout) -{ - int threshold; - - port->ip_rx_timeout = timeout; - - /* Timeout is in ticks. Let's figure out how many chars we - * can receive at the current baud rate in that interval - * and set the rx threshold to that amount. There are 4 chars - * per ring entry, so we'll divide the number of chars that will - * arrive in timeout by 4. - * So .... timeout * baud / 10 / HZ / 4, with HZ = 100. - */ - threshold = timeout * port->ip_baud / 4000; - if (threshold == 0) - threshold = 1; /* otherwise we'll intr all the time! */ - - if ((unsigned)threshold > (unsigned)SSCR_RX_THRESHOLD) - return 1; - - port->ip_sscr &= ~SSCR_RX_THRESHOLD; - port->ip_sscr |= threshold; - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - - /* Now set the rx timeout to the given value - * again timeout * SRTR_HZ / HZ - */ - timeout = timeout * SRTR_HZ / 100; - if (timeout > SRTR_CNT) - timeout = SRTR_CNT; - writel(timeout, &port->ip_serial_regs->srtr); - return 0; -} - -/** - * config_port - config the hardware - * @port: port to config - * @baud: baud rate for the port - * @byte_size: data size - * @stop_bits: number of stop bits - * @parenb: parity enable ? - * @parodd: odd parity ? - */ -static inline int -config_port(struct ioc3_port *port, - int baud, int byte_size, int stop_bits, int parenb, int parodd) -{ - char lcr, sizebits; - int spiniter = 0; - - DPRINT_CONFIG(("%s: line %d baud %d byte_size %d stop %d parenb %d " - "parodd %d\n", - __func__, ((struct uart_port *)port->ip_port)->line, - baud, byte_size, stop_bits, parenb, parodd)); - - if (set_baud(port, baud)) - return 1; - - switch (byte_size) { - case 5: - sizebits = UART_LCR_WLEN5; - break; - case 6: - sizebits = UART_LCR_WLEN6; - break; - case 7: - sizebits = UART_LCR_WLEN7; - break; - case 8: - sizebits = UART_LCR_WLEN8; - break; - default: - return 1; - } - - /* Pause the DMA interface if necessary */ - if (port->ip_sscr & SSCR_DMA_EN) { - writel(port->ip_sscr | SSCR_DMA_PAUSE, - &port->ip_serial_regs->sscr); - while ((readl(&port->ip_serial_regs->sscr) - & SSCR_PAUSE_STATE) == 0) { - spiniter++; - if (spiniter > MAXITER) - return -1; - } - } - - /* Clear relevant fields in lcr */ - lcr = readb(&port->ip_uart_regs->iu_lcr); - lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR | - UART_LCR_PARITY | LCR_MASK_STOP_BITS); - - /* Set byte size in lcr */ - lcr |= sizebits; - - /* Set parity */ - if (parenb) { - lcr |= UART_LCR_PARITY; - if (!parodd) - lcr |= UART_LCR_EPAR; - } - - /* Set stop bits */ - if (stop_bits) - lcr |= UART_LCR_STOP /* 2 stop bits */ ; - - writeb(lcr, &port->ip_uart_regs->iu_lcr); - - /* Re-enable the DMA interface if necessary */ - if (port->ip_sscr & SSCR_DMA_EN) { - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - port->ip_baud = baud; - - /* When we get within this number of ring entries of filling the - * entire ring on tx, place an EXPLICIT intr to generate a lowat - * notification when output has drained. - */ - port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4; - if (port->ip_tx_lowat == 0) - port->ip_tx_lowat = 1; - - set_rx_timeout(port, 2); - return 0; -} - -/** - * do_write - Write bytes to the port. Returns the number of bytes - * actually written. Called from transmit_chars - * @port: port to use - * @buf: the stuff to write - * @len: how many bytes in 'buf' - */ -static inline int do_write(struct ioc3_port *port, char *buf, int len) -{ - int prod_ptr, cons_ptr, total = 0; - struct ring *outring; - struct ring_entry *entry; - struct port_hooks *hooks = port->ip_hooks; - - BUG_ON(!(len >= 0)); - - prod_ptr = port->ip_tx_prod; - cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; - outring = port->ip_outring; - - /* Maintain a 1-entry red-zone. The ring buffer is full when - * (cons - prod) % ring_size is 1. Rather than do this subtraction - * in the body of the loop, I'll do it now. - */ - cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK; - - /* Stuff the bytes into the output */ - while ((prod_ptr != cons_ptr) && (len > 0)) { - int xx; - - /* Get 4 bytes (one ring entry) at a time */ - entry = (struct ring_entry *)((caddr_t) outring + prod_ptr); - - /* Invalidate all entries */ - entry->ring_allsc = 0; - - /* Copy in some bytes */ - for (xx = 0; (xx < 4) && (len > 0); xx++) { - entry->ring_data[xx] = *buf++; - entry->ring_sc[xx] = TXCB_VALID; - len--; - total++; - } - - /* If we are within some small threshold of filling up the - * entire ring buffer, we must place an EXPLICIT intr here - * to generate a lowat interrupt in case we subsequently - * really do fill up the ring and the caller goes to sleep. - * No need to place more than one though. - */ - if (!(port->ip_flags & LOWAT_WRITTEN) && - ((cons_ptr - prod_ptr) & PROD_CONS_MASK) - <= port->ip_tx_lowat * (int)sizeof(struct ring_entry)) { - port->ip_flags |= LOWAT_WRITTEN; - entry->ring_sc[0] |= TXCB_INT_WHEN_DONE; - } - - /* Go on to next entry */ - prod_ptr += sizeof(struct ring_entry); - prod_ptr &= PROD_CONS_MASK; - } - - /* If we sent something, start DMA if necessary */ - if (total > 0 && !(port->ip_sscr & SSCR_DMA_EN)) { - port->ip_sscr |= SSCR_DMA_EN; - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - - /* Store the new producer pointer. If tx is disabled, we stuff the - * data into the ring buffer, but we don't actually start tx. - */ - if (!uart_tx_stopped(port->ip_port)) { - writel(prod_ptr, &port->ip_serial_regs->stpir); - - /* If we are now transmitting, enable tx_mt interrupt so we - * can disable DMA if necessary when the tx finishes. - */ - if (total > 0) - enable_intrs(port, hooks->intr_tx_mt); - } - port->ip_tx_prod = prod_ptr; - - return total; -} - -/** - * disable_intrs - disable interrupts - * @port: port to enable - * @mask: mask to use - */ -static inline void disable_intrs(struct ioc3_port *port, uint32_t mask) -{ - if (port->ip_card->ic_enable & mask) { - ioc3_disable(port->ip_is, port->ip_idd, mask); - port->ip_card->ic_enable &= ~mask; - } -} - -/** - * set_notification - Modify event notification - * @port: port to use - * @mask: events mask - * @set_on: set ? - */ -static int set_notification(struct ioc3_port *port, int mask, int set_on) -{ - struct port_hooks *hooks = port->ip_hooks; - uint32_t intrbits, sscrbits; - - BUG_ON(!mask); - - intrbits = sscrbits = 0; - - if (mask & N_DATA_READY) - intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high); - if (mask & N_OUTPUT_LOWAT) - intrbits |= hooks->intr_tx_explicit; - if (mask & N_DDCD) { - intrbits |= hooks->intr_delta_dcd; - sscrbits |= SSCR_RX_RING_DCD; - } - if (mask & N_DCTS) - intrbits |= hooks->intr_delta_cts; - - if (set_on) { - enable_intrs(port, intrbits); - port->ip_notify |= mask; - port->ip_sscr |= sscrbits; - } else { - disable_intrs(port, intrbits); - port->ip_notify &= ~mask; - port->ip_sscr &= ~sscrbits; - } - - /* We require DMA if either DATA_READY or DDCD notification is - * currently requested. If neither of these is requested and - * there is currently no tx in progress, DMA may be disabled. - */ - if (port->ip_notify & (N_DATA_READY | N_DDCD)) - port->ip_sscr |= SSCR_DMA_EN; - else if (!(port->ip_card->ic_enable & hooks->intr_tx_mt)) - port->ip_sscr &= ~SSCR_DMA_EN; - - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - return 0; -} - -/** - * set_mcr - set the master control reg - * @the_port: port to use - * @mask1: mcr mask - * @mask2: shadow mask - */ -static inline int set_mcr(struct uart_port *the_port, - int mask1, int mask2) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - uint32_t shadow; - int spiniter = 0; - char mcr; - - if (!port) - return -1; - - /* Pause the DMA interface if necessary */ - if (port->ip_sscr & SSCR_DMA_EN) { - writel(port->ip_sscr | SSCR_DMA_PAUSE, - &port->ip_serial_regs->sscr); - while ((readl(&port->ip_serial_regs->sscr) - & SSCR_PAUSE_STATE) == 0) { - spiniter++; - if (spiniter > MAXITER) - return -1; - } - } - shadow = readl(&port->ip_serial_regs->shadow); - mcr = (shadow & 0xff000000) >> 24; - - /* Set new value */ - mcr |= mask1; - shadow |= mask2; - writeb(mcr, &port->ip_uart_regs->iu_mcr); - writel(shadow, &port->ip_serial_regs->shadow); - - /* Re-enable the DMA interface if necessary */ - if (port->ip_sscr & SSCR_DMA_EN) { - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - return 0; -} - -/** - * ioc3_set_proto - set the protocol for the port - * @port: port to use - * @proto: protocol to use - */ -static int ioc3_set_proto(struct ioc3_port *port, int proto) -{ - struct port_hooks *hooks = port->ip_hooks; - - switch (proto) { - default: - case PROTO_RS232: - /* Clear the appropriate GIO pin */ - DPRINT_CONFIG(("%s: rs232\n", __func__)); - writel(0, (&port->ip_idd->vma->gppr[0] - + hooks->rs422_select_pin)); - break; - - case PROTO_RS422: - /* Set the appropriate GIO pin */ - DPRINT_CONFIG(("%s: rs422\n", __func__)); - writel(1, (&port->ip_idd->vma->gppr[0] - + hooks->rs422_select_pin)); - break; - } - return 0; -} - -/** - * transmit_chars - upper level write, called with the_port->lock - * @the_port: port to write - */ -static void transmit_chars(struct uart_port *the_port) -{ - int xmit_count, tail, head; - int result; - char *start; - struct tty_struct *tty; - struct ioc3_port *port = get_ioc3_port(the_port); - struct uart_state *state; - - if (!the_port) - return; - if (!port) - return; - - state = the_port->state; - tty = state->port.tty; - - if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) { - /* Nothing to do or hw stopped */ - set_notification(port, N_ALL_OUTPUT, 0); - return; - } - - head = state->xmit.head; - tail = state->xmit.tail; - start = (char *)&state->xmit.buf[tail]; - - /* write out all the data or until the end of the buffer */ - xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail); - if (xmit_count > 0) { - result = do_write(port, start, xmit_count); - if (result > 0) { - /* booking */ - xmit_count -= result; - the_port->icount.tx += result; - /* advance the pointers */ - tail += result; - tail &= UART_XMIT_SIZE - 1; - state->xmit.tail = tail; - start = (char *)&state->xmit.buf[tail]; - } - } - if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS) - uart_write_wakeup(the_port); - - if (uart_circ_empty(&state->xmit)) { - set_notification(port, N_OUTPUT_LOWAT, 0); - } else { - set_notification(port, N_OUTPUT_LOWAT, 1); - } -} - -/** - * ioc3_change_speed - change the speed of the port - * @the_port: port to change - * @new_termios: new termios settings - * @old_termios: old termios settings - */ -static void -ioc3_change_speed(struct uart_port *the_port, - struct ktermios *new_termios, struct ktermios *old_termios) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - unsigned int cflag, iflag; - int baud; - int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8; - struct uart_state *state = the_port->state; - - cflag = new_termios->c_cflag; - iflag = new_termios->c_iflag; - - switch (cflag & CSIZE) { - case CS5: - new_data = 5; - break; - case CS6: - new_data = 6; - break; - case CS7: - new_data = 7; - break; - case CS8: - new_data = 8; - break; - default: - /* cuz we always need a default ... */ - new_data = 5; - break; - } - if (cflag & CSTOPB) { - new_stop = 1; - } - if (cflag & PARENB) { - new_parity_enable = 1; - if (cflag & PARODD) - new_parity = 1; - } - baud = uart_get_baud_rate(the_port, new_termios, old_termios, - MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED); - DPRINT_CONFIG(("%s: returned baud %d for line %d\n", __func__, baud, - the_port->line)); - - if (!the_port->fifosize) - the_port->fifosize = FIFO_SIZE; - uart_update_timeout(the_port, cflag, baud); - - the_port->ignore_status_mask = N_ALL_INPUT; - - state->port.tty->low_latency = 1; - - if (iflag & IGNPAR) - the_port->ignore_status_mask &= ~(N_PARITY_ERROR - | N_FRAMING_ERROR); - if (iflag & IGNBRK) { - the_port->ignore_status_mask &= ~N_BREAK; - if (iflag & IGNPAR) - the_port->ignore_status_mask &= ~N_OVERRUN_ERROR; - } - if (!(cflag & CREAD)) { - /* ignore everything */ - the_port->ignore_status_mask &= ~N_DATA_READY; - } - - if (cflag & CRTSCTS) { - /* enable hardware flow control */ - port->ip_sscr |= SSCR_HFC_EN; - } - else { - /* disable hardware flow control */ - port->ip_sscr &= ~SSCR_HFC_EN; - } - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - - /* Set the configuration and proper notification call */ - DPRINT_CONFIG(("%s : port 0x%p line %d cflag 0%o " - "config_port(baud %d data %d stop %d penable %d " - " parity %d), notification 0x%x\n", - __func__, (void *)port, the_port->line, cflag, baud, - new_data, new_stop, new_parity_enable, new_parity, - the_port->ignore_status_mask)); - - if ((config_port(port, baud, /* baud */ - new_data, /* byte size */ - new_stop, /* stop bits */ - new_parity_enable, /* set parity */ - new_parity)) >= 0) { /* parity 1==odd */ - set_notification(port, the_port->ignore_status_mask, 1); - } -} - -/** - * ic3_startup_local - Start up the serial port - returns >= 0 if no errors - * @the_port: Port to operate on - */ -static inline int ic3_startup_local(struct uart_port *the_port) -{ - struct ioc3_port *port; - - if (!the_port) { - NOT_PROGRESS(); - return -1; - } - - port = get_ioc3_port(the_port); - if (!port) { - NOT_PROGRESS(); - return -1; - } - - local_open(port); - - /* set the protocol */ - ioc3_set_proto(port, IS_RS232(the_port->line) ? PROTO_RS232 : - PROTO_RS422); - return 0; -} - -/* - * ioc3_cb_output_lowat - called when the output low water mark is hit - * @port: port to output - */ -static void ioc3_cb_output_lowat(struct ioc3_port *port) -{ - unsigned long pflags; - - /* the_port->lock is set on the call here */ - if (port->ip_port) { - spin_lock_irqsave(&port->ip_port->lock, pflags); - transmit_chars(port->ip_port); - spin_unlock_irqrestore(&port->ip_port->lock, pflags); - } -} - -/* - * ioc3_cb_post_ncs - called for some basic errors - * @port: port to use - * @ncs: event - */ -static void ioc3_cb_post_ncs(struct uart_port *the_port, int ncs) -{ - struct uart_icount *icount; - - icount = &the_port->icount; - - if (ncs & NCS_BREAK) - icount->brk++; - if (ncs & NCS_FRAMING) - icount->frame++; - if (ncs & NCS_OVERRUN) - icount->overrun++; - if (ncs & NCS_PARITY) - icount->parity++; -} - -/** - * do_read - Read in bytes from the port. Return the number of bytes - * actually read. - * @the_port: port to use - * @buf: place to put the stuff we read - * @len: how big 'buf' is - */ - -static inline int do_read(struct uart_port *the_port, char *buf, int len) -{ - int prod_ptr, cons_ptr, total; - struct ioc3_port *port = get_ioc3_port(the_port); - struct ring *inring; - struct ring_entry *entry; - struct port_hooks *hooks = port->ip_hooks; - int byte_num; - char *sc; - int loop_counter; - - BUG_ON(!(len >= 0)); - BUG_ON(!port); - - /* There is a nasty timing issue in the IOC3. When the rx_timer - * expires or the rx_high condition arises, we take an interrupt. - * At some point while servicing the interrupt, we read bytes from - * the ring buffer and re-arm the rx_timer. However the rx_timer is - * not started until the first byte is received *after* it is armed, - * and any bytes pending in the rx construction buffers are not drained - * to memory until either there are 4 bytes available or the rx_timer - * expires. This leads to a potential situation where data is left - * in the construction buffers forever - 1 to 3 bytes were received - * after the interrupt was generated but before the rx_timer was - * re-armed. At that point as long as no subsequent bytes are received - * the timer will never be started and the bytes will remain in the - * construction buffer forever. The solution is to execute a DRAIN - * command after rearming the timer. This way any bytes received before - * the DRAIN will be drained to memory, and any bytes received after - * the DRAIN will start the TIMER and be drained when it expires. - * Luckily, this only needs to be done when the DMA buffer is empty - * since there is no requirement that this function return all - * available data as long as it returns some. - */ - /* Re-arm the timer */ - - writel(port->ip_rx_cons | SRCIR_ARM, &port->ip_serial_regs->srcir); - - prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; - cons_ptr = port->ip_rx_cons; - - if (prod_ptr == cons_ptr) { - int reset_dma = 0; - - /* Input buffer appears empty, do a flush. */ - - /* DMA must be enabled for this to work. */ - if (!(port->ip_sscr & SSCR_DMA_EN)) { - port->ip_sscr |= SSCR_DMA_EN; - reset_dma = 1; - } - - /* Potential race condition: we must reload the srpir after - * issuing the drain command, otherwise we could think the rx - * buffer is empty, then take a very long interrupt, and when - * we come back it's full and we wait forever for the drain to - * complete. - */ - writel(port->ip_sscr | SSCR_RX_DRAIN, - &port->ip_serial_regs->sscr); - prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; - - /* We must not wait for the DRAIN to complete unless there are - * at least 8 bytes (2 ring entries) available to receive the - * data otherwise the DRAIN will never complete and we'll - * deadlock here. - * In fact, to make things easier, I'll just ignore the flush if - * there is any data at all now available. - */ - if (prod_ptr == cons_ptr) { - loop_counter = 0; - while (readl(&port->ip_serial_regs->sscr) & - SSCR_RX_DRAIN) { - loop_counter++; - if (loop_counter > MAXITER) - return -1; - } - - /* SIGH. We have to reload the prod_ptr *again* since - * the drain may have caused it to change - */ - prod_ptr = readl(&port->ip_serial_regs->srpir) - & PROD_CONS_MASK; - } - if (reset_dma) { - port->ip_sscr &= ~SSCR_DMA_EN; - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - } - inring = port->ip_inring; - port->ip_flags &= ~READ_ABORTED; - - total = 0; - loop_counter = 0xfffff; /* to avoid hangs */ - - /* Grab bytes from the hardware */ - while ((prod_ptr != cons_ptr) && (len > 0)) { - entry = (struct ring_entry *)((caddr_t) inring + cons_ptr); - - if (loop_counter-- <= 0) { - printk(KERN_WARNING "IOC3 serial: " - "possible hang condition/" - "port stuck on read (line %d).\n", - the_port->line); - break; - } - - /* According to the producer pointer, this ring entry - * must contain some data. But if the PIO happened faster - * than the DMA, the data may not be available yet, so let's - * wait until it arrives. - */ - if ((entry->ring_allsc & RING_ANY_VALID) == 0) { - /* Indicate the read is aborted so we don't disable - * the interrupt thinking that the consumer is - * congested. - */ - port->ip_flags |= READ_ABORTED; - len = 0; - break; - } - - /* Load the bytes/status out of the ring entry */ - for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) { - sc = &(entry->ring_sc[byte_num]); - - /* Check for change in modem state or overrun */ - if ((*sc & RXSB_MODEM_VALID) - && (port->ip_notify & N_DDCD)) { - /* Notify upper layer if DCD dropped */ - if ((port->ip_flags & DCD_ON) - && !(*sc & RXSB_DCD)) { - /* If we have already copied some data, - * return it. We'll pick up the carrier - * drop on the next pass. That way we - * don't throw away the data that has - * already been copied back to - * the caller's buffer. - */ - if (total > 0) { - len = 0; - break; - } - port->ip_flags &= ~DCD_ON; - - /* Turn off this notification so the - * carrier drop protocol won't see it - * again when it does a read. - */ - *sc &= ~RXSB_MODEM_VALID; - - /* To keep things consistent, we need - * to update the consumer pointer so - * the next reader won't come in and - * try to read the same ring entries - * again. This must be done here before - * the dcd change. - */ - - if ((entry->ring_allsc & RING_ANY_VALID) - == 0) { - cons_ptr += (int)sizeof - (struct ring_entry); - cons_ptr &= PROD_CONS_MASK; - } - writel(cons_ptr, - &port->ip_serial_regs->srcir); - port->ip_rx_cons = cons_ptr; - - /* Notify upper layer of carrier drop */ - if ((port->ip_notify & N_DDCD) - && port->ip_port) { - uart_handle_dcd_change - (port->ip_port, 0); - wake_up_interruptible - (&the_port->state-> - port.delta_msr_wait); - } - - /* If we had any data to return, we - * would have returned it above. - */ - return 0; - } - } - if (*sc & RXSB_MODEM_VALID) { - /* Notify that an input overrun occurred */ - if ((*sc & RXSB_OVERRUN) - && (port->ip_notify & N_OVERRUN_ERROR)) { - ioc3_cb_post_ncs(the_port, NCS_OVERRUN); - } - /* Don't look at this byte again */ - *sc &= ~RXSB_MODEM_VALID; - } - - /* Check for valid data or RX errors */ - if ((*sc & RXSB_DATA_VALID) && - ((*sc & (RXSB_PAR_ERR - | RXSB_FRAME_ERR | RXSB_BREAK)) - && (port->ip_notify & (N_PARITY_ERROR - | N_FRAMING_ERROR - | N_BREAK)))) { - /* There is an error condition on the next byte. - * If we have already transferred some bytes, - * we'll stop here. Otherwise if this is the - * first byte to be read, we'll just transfer - * it alone after notifying the - * upper layer of its status. - */ - if (total > 0) { - len = 0; - break; - } else { - if ((*sc & RXSB_PAR_ERR) && - (port-> - ip_notify & N_PARITY_ERROR)) { - ioc3_cb_post_ncs(the_port, - NCS_PARITY); - } - if ((*sc & RXSB_FRAME_ERR) && - (port-> - ip_notify & N_FRAMING_ERROR)) { - ioc3_cb_post_ncs(the_port, - NCS_FRAMING); - } - if ((*sc & RXSB_BREAK) - && (port->ip_notify & N_BREAK)) { - ioc3_cb_post_ncs - (the_port, NCS_BREAK); - } - len = 1; - } - } - if (*sc & RXSB_DATA_VALID) { - *sc &= ~RXSB_DATA_VALID; - *buf = entry->ring_data[byte_num]; - buf++; - len--; - total++; - } - } - - /* If we used up this entry entirely, go on to the next one, - * otherwise we must have run out of buffer space, so - * leave the consumer pointer here for the next read in case - * there are still unread bytes in this entry. - */ - if ((entry->ring_allsc & RING_ANY_VALID) == 0) { - cons_ptr += (int)sizeof(struct ring_entry); - cons_ptr &= PROD_CONS_MASK; - } - } - - /* Update consumer pointer and re-arm rx timer interrupt */ - writel(cons_ptr, &port->ip_serial_regs->srcir); - port->ip_rx_cons = cons_ptr; - - /* If we have now dipped below the rx high water mark and we have - * rx_high interrupt turned off, we can now turn it back on again. - */ - if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr) - & PROD_CONS_MASK) < - ((port-> - ip_sscr & - SSCR_RX_THRESHOLD) - << PROD_CONS_PTR_OFF))) { - port->ip_flags &= ~INPUT_HIGH; - enable_intrs(port, hooks->intr_rx_high); - } - return total; -} - -/** - * receive_chars - upper level read. - * @the_port: port to read from - */ -static int receive_chars(struct uart_port *the_port) -{ - struct tty_struct *tty; - unsigned char ch[MAX_CHARS]; - int read_count = 0, read_room, flip = 0; - struct uart_state *state = the_port->state; - struct ioc3_port *port = get_ioc3_port(the_port); - unsigned long pflags; - - /* Make sure all the pointers are "good" ones */ - if (!state) - return 0; - if (!state->port.tty) - return 0; - - if (!(port->ip_flags & INPUT_ENABLE)) - return 0; - - spin_lock_irqsave(&the_port->lock, pflags); - tty = state->port.tty; - - read_count = do_read(the_port, ch, MAX_CHARS); - if (read_count > 0) { - flip = 1; - read_room = tty_insert_flip_string(tty, ch, read_count); - the_port->icount.rx += read_count; - } - spin_unlock_irqrestore(&the_port->lock, pflags); - - if (flip) - tty_flip_buffer_push(tty); - - return read_count; -} - -/** - * ioc3uart_intr_one - lowest level (per port) interrupt handler. - * @is : submodule - * @idd: driver data - * @pending: interrupts to handle - */ - -static int inline -ioc3uart_intr_one(struct ioc3_submodule *is, - struct ioc3_driver_data *idd, - unsigned int pending) -{ - int port_num = GET_PORT_FROM_SIO_IR(pending); - struct port_hooks *hooks; - unsigned int rx_high_rd_aborted = 0; - unsigned long flags; - struct uart_port *the_port; - struct ioc3_port *port; - int loop_counter; - struct ioc3_card *card_ptr; - unsigned int sio_ir; - - card_ptr = idd->data[is->id]; - port = card_ptr->ic_port[port_num].icp_port; - hooks = port->ip_hooks; - - /* Possible race condition here: The tx_mt interrupt bit may be - * cleared without the intervention of the interrupt handler, - * e.g. by a write. If the top level interrupt handler reads a - * tx_mt, then some other processor does a write, starting up - * output, then we come in here, see the tx_mt and stop DMA, the - * output started by the other processor will hang. Thus we can - * only rely on tx_mt being legitimate if it is read while the - * port lock is held. Therefore this bit must be ignored in the - * passed in interrupt mask which was read by the top level - * interrupt handler since the port lock was not held at the time - * it was read. We can only rely on this bit being accurate if it - * is read while the port lock is held. So we'll clear it for now, - * and reload it later once we have the port lock. - */ - - sio_ir = pending & ~(hooks->intr_tx_mt); - spin_lock_irqsave(&port->ip_lock, flags); - - loop_counter = MAXITER; /* to avoid hangs */ - - do { - uint32_t shadow; - - if (loop_counter-- <= 0) { - printk(KERN_WARNING "IOC3 serial: " - "possible hang condition/" - "port stuck on interrupt (line %d).\n", - ((struct uart_port *)port->ip_port)->line); - break; - } - /* Handle a DCD change */ - if (sio_ir & hooks->intr_delta_dcd) { - ioc3_ack(is, idd, hooks->intr_delta_dcd); - shadow = readl(&port->ip_serial_regs->shadow); - - if ((port->ip_notify & N_DDCD) - && (shadow & SHADOW_DCD) - && (port->ip_port)) { - the_port = port->ip_port; - uart_handle_dcd_change(the_port, - shadow & SHADOW_DCD); - wake_up_interruptible - (&the_port->state->port.delta_msr_wait); - } else if ((port->ip_notify & N_DDCD) - && !(shadow & SHADOW_DCD)) { - /* Flag delta DCD/no DCD */ - uart_handle_dcd_change(port->ip_port, - shadow & SHADOW_DCD); - port->ip_flags |= DCD_ON; - } - } - - /* Handle a CTS change */ - if (sio_ir & hooks->intr_delta_cts) { - ioc3_ack(is, idd, hooks->intr_delta_cts); - shadow = readl(&port->ip_serial_regs->shadow); - - if ((port->ip_notify & N_DCTS) && (port->ip_port)) { - the_port = port->ip_port; - uart_handle_cts_change(the_port, shadow - & SHADOW_CTS); - wake_up_interruptible - (&the_port->state->port.delta_msr_wait); - } - } - - /* rx timeout interrupt. Must be some data available. Put this - * before the check for rx_high since servicing this condition - * may cause that condition to clear. - */ - if (sio_ir & hooks->intr_rx_timer) { - ioc3_ack(is, idd, hooks->intr_rx_timer); - if ((port->ip_notify & N_DATA_READY) - && (port->ip_port)) { - receive_chars(port->ip_port); - } - } - - /* rx high interrupt. Must be after rx_timer. */ - else if (sio_ir & hooks->intr_rx_high) { - /* Data available, notify upper layer */ - if ((port->ip_notify & N_DATA_READY) && port->ip_port) { - receive_chars(port->ip_port); - } - - /* We can't ACK this interrupt. If receive_chars didn't - * cause the condition to clear, we'll have to disable - * the interrupt until the data is drained. - * If the read was aborted, don't disable the interrupt - * as this may cause us to hang indefinitely. An - * aborted read generally means that this interrupt - * hasn't been delivered to the cpu yet anyway, even - * though we see it as asserted when we read the sio_ir. - */ - if ((sio_ir = PENDING(card_ptr, idd)) - & hooks->intr_rx_high) { - if (port->ip_flags & READ_ABORTED) { - rx_high_rd_aborted++; - } - else { - card_ptr->ic_enable &= ~hooks->intr_rx_high; - port->ip_flags |= INPUT_HIGH; - } - } - } - - /* We got a low water interrupt: notify upper layer to - * send more data. Must come before tx_mt since servicing - * this condition may cause that condition to clear. - */ - if (sio_ir & hooks->intr_tx_explicit) { - port->ip_flags &= ~LOWAT_WRITTEN; - ioc3_ack(is, idd, hooks->intr_tx_explicit); - if (port->ip_notify & N_OUTPUT_LOWAT) - ioc3_cb_output_lowat(port); - } - - /* Handle tx_mt. Must come after tx_explicit. */ - else if (sio_ir & hooks->intr_tx_mt) { - /* If we are expecting a lowat notification - * and we get to this point it probably means that for - * some reason the tx_explicit didn't work as expected - * (that can legitimately happen if the output buffer is - * filled up in just the right way). - * So send the notification now. - */ - if (port->ip_notify & N_OUTPUT_LOWAT) { - ioc3_cb_output_lowat(port); - - /* We need to reload the sio_ir since the lowat - * call may have caused another write to occur, - * clearing the tx_mt condition. - */ - sio_ir = PENDING(card_ptr, idd); - } - - /* If the tx_mt condition still persists even after the - * lowat call, we've got some work to do. - */ - if (sio_ir & hooks->intr_tx_mt) { - /* If we are not currently expecting DMA input, - * and the transmitter has just gone idle, - * there is no longer any reason for DMA, so - * disable it. - */ - if (!(port->ip_notify - & (N_DATA_READY | N_DDCD))) { - BUG_ON(!(port->ip_sscr - & SSCR_DMA_EN)); - port->ip_sscr &= ~SSCR_DMA_EN; - writel(port->ip_sscr, - &port->ip_serial_regs->sscr); - } - /* Prevent infinite tx_mt interrupt */ - card_ptr->ic_enable &= ~hooks->intr_tx_mt; - } - } - sio_ir = PENDING(card_ptr, idd); - - /* if the read was aborted and only hooks->intr_rx_high, - * clear hooks->intr_rx_high, so we do not loop forever. - */ - - if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) { - sio_ir &= ~hooks->intr_rx_high; - } - } while (sio_ir & hooks->intr_all); - - spin_unlock_irqrestore(&port->ip_lock, flags); - ioc3_enable(is, idd, card_ptr->ic_enable); - return 0; -} - -/** - * ioc3uart_intr - field all serial interrupts - * @is : submodule - * @idd: driver data - * @pending: interrupts to handle - * - */ - -static int ioc3uart_intr(struct ioc3_submodule *is, - struct ioc3_driver_data *idd, - unsigned int pending) -{ - int ret = 0; - - /* - * The upper level interrupt handler sends interrupts for both ports - * here. So we need to call for each port with its interrupts. - */ - - if (pending & SIO_IR_SA) - ret |= ioc3uart_intr_one(is, idd, pending & SIO_IR_SA); - if (pending & SIO_IR_SB) - ret |= ioc3uart_intr_one(is, idd, pending & SIO_IR_SB); - - return ret; -} - -/** - * ic3_type - * @port: Port to operate with (we ignore since we only have one port) - * - */ -static const char *ic3_type(struct uart_port *the_port) -{ - if (IS_RS232(the_port->line)) - return "SGI IOC3 Serial [rs232]"; - else - return "SGI IOC3 Serial [rs422]"; -} - -/** - * ic3_tx_empty - Is the transmitter empty? - * @port: Port to operate on - * - */ -static unsigned int ic3_tx_empty(struct uart_port *the_port) -{ - unsigned int ret = 0; - struct ioc3_port *port = get_ioc3_port(the_port); - - if (readl(&port->ip_serial_regs->shadow) & SHADOW_TEMT) - ret = TIOCSER_TEMT; - return ret; -} - -/** - * ic3_stop_tx - stop the transmitter - * @port: Port to operate on - * - */ -static void ic3_stop_tx(struct uart_port *the_port) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - - if (port) - set_notification(port, N_OUTPUT_LOWAT, 0); -} - -/** - * ic3_stop_rx - stop the receiver - * @port: Port to operate on - * - */ -static void ic3_stop_rx(struct uart_port *the_port) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - - if (port) - port->ip_flags &= ~INPUT_ENABLE; -} - -/** - * null_void_function - * @port: Port to operate on - * - */ -static void null_void_function(struct uart_port *the_port) -{ -} - -/** - * ic3_shutdown - shut down the port - free irq and disable - * @port: port to shut down - * - */ -static void ic3_shutdown(struct uart_port *the_port) -{ - unsigned long port_flags; - struct ioc3_port *port; - struct uart_state *state; - - port = get_ioc3_port(the_port); - if (!port) - return; - - state = the_port->state; - wake_up_interruptible(&state->port.delta_msr_wait); - - spin_lock_irqsave(&the_port->lock, port_flags); - set_notification(port, N_ALL, 0); - spin_unlock_irqrestore(&the_port->lock, port_flags); -} - -/** - * ic3_set_mctrl - set control lines (dtr, rts, etc) - * @port: Port to operate on - * @mctrl: Lines to set/unset - * - */ -static void ic3_set_mctrl(struct uart_port *the_port, unsigned int mctrl) -{ - unsigned char mcr = 0; - - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - set_mcr(the_port, mcr, SHADOW_DTR); -} - -/** - * ic3_get_mctrl - get control line info - * @port: port to operate on - * - */ -static unsigned int ic3_get_mctrl(struct uart_port *the_port) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - uint32_t shadow; - unsigned int ret = 0; - - if (!port) - return 0; - - shadow = readl(&port->ip_serial_regs->shadow); - if (shadow & SHADOW_DCD) - ret |= TIOCM_CD; - if (shadow & SHADOW_DR) - ret |= TIOCM_DSR; - if (shadow & SHADOW_CTS) - ret |= TIOCM_CTS; - return ret; -} - -/** - * ic3_start_tx - Start transmitter. Called with the_port->lock - * @port: Port to operate on - * - */ -static void ic3_start_tx(struct uart_port *the_port) -{ - struct ioc3_port *port = get_ioc3_port(the_port); - - if (port) { - set_notification(port, N_OUTPUT_LOWAT, 1); - enable_intrs(port, port->ip_hooks->intr_tx_mt); - } -} - -/** - * ic3_break_ctl - handle breaks - * @port: Port to operate on - * @break_state: Break state - * - */ -static void ic3_break_ctl(struct uart_port *the_port, int break_state) -{ -} - -/** - * ic3_startup - Start up the serial port - always return 0 (We're always on) - * @port: Port to operate on - * - */ -static int ic3_startup(struct uart_port *the_port) -{ - int retval; - struct ioc3_port *port; - struct ioc3_card *card_ptr; - unsigned long port_flags; - - if (!the_port) { - NOT_PROGRESS(); - return -ENODEV; - } - port = get_ioc3_port(the_port); - if (!port) { - NOT_PROGRESS(); - return -ENODEV; - } - card_ptr = port->ip_card; - port->ip_port = the_port; - - if (!card_ptr) { - NOT_PROGRESS(); - return -ENODEV; - } - - /* Start up the serial port */ - spin_lock_irqsave(&the_port->lock, port_flags); - retval = ic3_startup_local(the_port); - spin_unlock_irqrestore(&the_port->lock, port_flags); - return retval; -} - -/** - * ic3_set_termios - set termios stuff - * @port: port to operate on - * @termios: New settings - * @termios: Old - * - */ -static void -ic3_set_termios(struct uart_port *the_port, - struct ktermios *termios, struct ktermios *old_termios) -{ - unsigned long port_flags; - - spin_lock_irqsave(&the_port->lock, port_flags); - ioc3_change_speed(the_port, termios, old_termios); - spin_unlock_irqrestore(&the_port->lock, port_flags); -} - -/** - * ic3_request_port - allocate resources for port - no op.... - * @port: port to operate on - * - */ -static int ic3_request_port(struct uart_port *port) -{ - return 0; -} - -/* Associate the uart functions above - given to serial core */ -static struct uart_ops ioc3_ops = { - .tx_empty = ic3_tx_empty, - .set_mctrl = ic3_set_mctrl, - .get_mctrl = ic3_get_mctrl, - .stop_tx = ic3_stop_tx, - .start_tx = ic3_start_tx, - .stop_rx = ic3_stop_rx, - .enable_ms = null_void_function, - .break_ctl = ic3_break_ctl, - .startup = ic3_startup, - .shutdown = ic3_shutdown, - .set_termios = ic3_set_termios, - .type = ic3_type, - .release_port = null_void_function, - .request_port = ic3_request_port, -}; - -/* - * Boot-time initialization code - */ - -static struct uart_driver ioc3_uart = { - .owner = THIS_MODULE, - .driver_name = "ioc3_serial", - .dev_name = DEVICE_NAME, - .major = DEVICE_MAJOR, - .minor = DEVICE_MINOR, - .nr = MAX_LOGICAL_PORTS -}; - -/** - * ioc3_serial_core_attach - register with serial core - * This is done during pci probing - * @is: submodule struct for this - * @idd: handle for this card - */ -static inline int ioc3_serial_core_attach( struct ioc3_submodule *is, - struct ioc3_driver_data *idd) -{ - struct ioc3_port *port; - struct uart_port *the_port; - struct ioc3_card *card_ptr = idd->data[is->id]; - int ii, phys_port; - struct pci_dev *pdev = idd->pdev; - - DPRINT_CONFIG(("%s: attach pdev 0x%p - card_ptr 0x%p\n", - __func__, pdev, (void *)card_ptr)); - - if (!card_ptr) - return -ENODEV; - - /* once around for each logical port on this card */ - for (ii = 0; ii < LOGICAL_PORTS_PER_CARD; ii++) { - phys_port = GET_PHYSICAL_PORT(ii); - the_port = &card_ptr->ic_port[phys_port]. - icp_uart_port[GET_LOGICAL_PORT(ii)]; - port = card_ptr->ic_port[phys_port].icp_port; - port->ip_port = the_port; - - DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p [%d/%d]\n", - __func__, (void *)the_port, (void *)port, - phys_port, ii)); - - /* membase, iobase and mapbase just need to be non-0 */ - the_port->membase = (unsigned char __iomem *)1; - the_port->iobase = (pdev->bus->number << 16) | ii; - the_port->line = (Num_of_ioc3_cards << 2) | ii; - the_port->mapbase = 1; - the_port->type = PORT_16550A; - the_port->fifosize = FIFO_SIZE; - the_port->ops = &ioc3_ops; - the_port->irq = idd->irq_io; - the_port->dev = &pdev->dev; - - if (uart_add_one_port(&ioc3_uart, the_port) < 0) { - printk(KERN_WARNING - "%s: unable to add port %d bus %d\n", - __func__, the_port->line, pdev->bus->number); - } else { - DPRINT_CONFIG(("IOC3 serial port %d irq %d bus %d\n", - the_port->line, the_port->irq, pdev->bus->number)); - } - - /* all ports are rs232 for now */ - if (IS_PHYSICAL_PORT(ii)) - ioc3_set_proto(port, PROTO_RS232); - } - return 0; -} - -/** - * ioc3uart_remove - register detach function - * @is: submodule struct for this submodule - * @idd: ioc3 driver data for this submodule - */ - -static int ioc3uart_remove(struct ioc3_submodule *is, - struct ioc3_driver_data *idd) -{ - struct ioc3_card *card_ptr = idd->data[is->id]; - struct uart_port *the_port; - struct ioc3_port *port; - int ii; - - if (card_ptr) { - for (ii = 0; ii < LOGICAL_PORTS_PER_CARD; ii++) { - the_port = &card_ptr->ic_port[GET_PHYSICAL_PORT(ii)]. - icp_uart_port[GET_LOGICAL_PORT(ii)]; - if (the_port) - uart_remove_one_port(&ioc3_uart, the_port); - port = card_ptr->ic_port[GET_PHYSICAL_PORT(ii)].icp_port; - if (port && IS_PHYSICAL_PORT(ii) - && (GET_PHYSICAL_PORT(ii) == 0)) { - pci_free_consistent(port->ip_idd->pdev, - TOTAL_RING_BUF_SIZE, - (void *)port->ip_cpu_ringbuf, - port->ip_dma_ringbuf); - kfree(port); - card_ptr->ic_port[GET_PHYSICAL_PORT(ii)]. - icp_port = NULL; - } - } - kfree(card_ptr); - idd->data[is->id] = NULL; - } - return 0; -} - -/** - * ioc3uart_probe - card probe function called from shim driver - * @is: submodule struct for this submodule - * @idd: ioc3 driver data for this card - */ - -static int __devinit -ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) -{ - struct pci_dev *pdev = idd->pdev; - struct ioc3_card *card_ptr; - int ret = 0; - struct ioc3_port *port; - struct ioc3_port *ports[PORTS_PER_CARD]; - int phys_port; - int cnt; - - DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, is, idd)); - - card_ptr = kzalloc(sizeof(struct ioc3_card), GFP_KERNEL); - if (!card_ptr) { - printk(KERN_WARNING "ioc3_attach_one" - ": unable to get memory for the IOC3\n"); - return -ENOMEM; - } - idd->data[is->id] = card_ptr; - Submodule_slot = is->id; - - writel(((UARTA_BASE >> 3) << SIO_CR_SER_A_BASE_SHIFT) | - ((UARTB_BASE >> 3) << SIO_CR_SER_B_BASE_SHIFT) | - (0xf << SIO_CR_CMD_PULSE_SHIFT), &idd->vma->sio_cr); - - pci_write_config_dword(pdev, PCI_LAT, 0xff00); - - /* Enable serial port mode select generic PIO pins as outputs */ - ioc3_gpcr_set(idd, GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL); - - /* Create port structures for each port */ - for (phys_port = 0; phys_port < PORTS_PER_CARD; phys_port++) { - port = kzalloc(sizeof(struct ioc3_port), GFP_KERNEL); - if (!port) { - printk(KERN_WARNING - "IOC3 serial memory not available for port\n"); - ret = -ENOMEM; - goto out4; - } - spin_lock_init(&port->ip_lock); - - /* we need to remember the previous ones, to point back to - * them farther down - setting up the ring buffers. - */ - ports[phys_port] = port; - - /* init to something useful */ - card_ptr->ic_port[phys_port].icp_port = port; - port->ip_is = is; - port->ip_idd = idd; - port->ip_baud = 9600; - port->ip_card = card_ptr; - port->ip_hooks = &hooks_array[phys_port]; - - /* Setup each port */ - if (phys_port == 0) { - port->ip_serial_regs = &idd->vma->port_a; - port->ip_uart_regs = &idd->vma->sregs.uarta; - - DPRINT_CONFIG(("%s : Port A ip_serial_regs 0x%p " - "ip_uart_regs 0x%p\n", - __func__, - (void *)port->ip_serial_regs, - (void *)port->ip_uart_regs)); - - /* setup ring buffers */ - port->ip_cpu_ringbuf = pci_alloc_consistent(pdev, - TOTAL_RING_BUF_SIZE, &port->ip_dma_ringbuf); - - BUG_ON(!((((int64_t) port->ip_dma_ringbuf) & - (TOTAL_RING_BUF_SIZE - 1)) == 0)); - port->ip_inring = RING(port, RX_A); - port->ip_outring = RING(port, TX_A); - DPRINT_CONFIG(("%s : Port A ip_cpu_ringbuf 0x%p " - "ip_dma_ringbuf 0x%p, ip_inring 0x%p " - "ip_outring 0x%p\n", - __func__, - (void *)port->ip_cpu_ringbuf, - (void *)port->ip_dma_ringbuf, - (void *)port->ip_inring, - (void *)port->ip_outring)); - } - else { - port->ip_serial_regs = &idd->vma->port_b; - port->ip_uart_regs = &idd->vma->sregs.uartb; - - DPRINT_CONFIG(("%s : Port B ip_serial_regs 0x%p " - "ip_uart_regs 0x%p\n", - __func__, - (void *)port->ip_serial_regs, - (void *)port->ip_uart_regs)); - - /* share the ring buffers */ - port->ip_dma_ringbuf = - ports[phys_port - 1]->ip_dma_ringbuf; - port->ip_cpu_ringbuf = - ports[phys_port - 1]->ip_cpu_ringbuf; - port->ip_inring = RING(port, RX_B); - port->ip_outring = RING(port, TX_B); - DPRINT_CONFIG(("%s : Port B ip_cpu_ringbuf 0x%p " - "ip_dma_ringbuf 0x%p, ip_inring 0x%p " - "ip_outring 0x%p\n", - __func__, - (void *)port->ip_cpu_ringbuf, - (void *)port->ip_dma_ringbuf, - (void *)port->ip_inring, - (void *)port->ip_outring)); - } - - DPRINT_CONFIG(("%s : port %d [addr 0x%p] card_ptr 0x%p", - __func__, - phys_port, (void *)port, (void *)card_ptr)); - DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n", - (void *)port->ip_serial_regs, - (void *)port->ip_uart_regs)); - - /* Initialize the hardware for IOC3 */ - port_init(port); - - DPRINT_CONFIG(("%s: phys_port %d port 0x%p inring 0x%p " - "outring 0x%p\n", - __func__, - phys_port, (void *)port, - (void *)port->ip_inring, - (void *)port->ip_outring)); - - } - - /* register port with the serial core */ - - if ((ret = ioc3_serial_core_attach(is, idd))) - goto out4; - - Num_of_ioc3_cards++; - - return ret; - - /* error exits that give back resources */ -out4: - for (cnt = 0; cnt < phys_port; cnt++) - kfree(ports[cnt]); - - kfree(card_ptr); - return ret; -} - -static struct ioc3_submodule ioc3uart_ops = { - .name = "IOC3uart", - .probe = ioc3uart_probe, - .remove = ioc3uart_remove, - /* call .intr for both ports initially */ - .irq_mask = SIO_IR_SA | SIO_IR_SB, - .intr = ioc3uart_intr, - .owner = THIS_MODULE, -}; - -/** - * ioc3_detect - module init called, - */ -static int __init ioc3uart_init(void) -{ - int ret; - - /* register with serial core */ - if ((ret = uart_register_driver(&ioc3_uart)) < 0) { - printk(KERN_WARNING - "%s: Couldn't register IOC3 uart serial driver\n", - __func__); - return ret; - } - ret = ioc3_register_submodule(&ioc3uart_ops); - if (ret) - uart_unregister_driver(&ioc3_uart); - return ret; -} - -static void __exit ioc3uart_exit(void) -{ - ioc3_unregister_submodule(&ioc3uart_ops); - uart_unregister_driver(&ioc3_uart); -} - -module_init(ioc3uart_init); -module_exit(ioc3uart_exit); - -MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) "); -MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC3 card"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c deleted file mode 100644 index fcfe82653ac8..000000000000 --- a/drivers/serial/ioc4_serial.c +++ /dev/null @@ -1,2953 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003-2006 Silicon Graphics, Inc. All Rights Reserved. - */ - - -/* - * This file contains a module version of the ioc4 serial driver. This - * includes all the support functions needed (support functions, etc.) - * and the serial driver itself. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * interesting things about the ioc4 - */ - -#define IOC4_NUM_SERIAL_PORTS 4 /* max ports per card */ -#define IOC4_NUM_CARDS 8 /* max cards per partition */ - -#define GET_SIO_IR(_n) (_n == 0) ? (IOC4_SIO_IR_S0) : \ - (_n == 1) ? (IOC4_SIO_IR_S1) : \ - (_n == 2) ? (IOC4_SIO_IR_S2) : \ - (IOC4_SIO_IR_S3) - -#define GET_OTHER_IR(_n) (_n == 0) ? (IOC4_OTHER_IR_S0_MEMERR) : \ - (_n == 1) ? (IOC4_OTHER_IR_S1_MEMERR) : \ - (_n == 2) ? (IOC4_OTHER_IR_S2_MEMERR) : \ - (IOC4_OTHER_IR_S3_MEMERR) - - -/* - * All IOC4 registers are 32 bits wide. - */ - -/* - * PCI Memory Space Map - */ -#define IOC4_PCI_ERR_ADDR_L 0x000 /* Low Error Address */ -#define IOC4_PCI_ERR_ADDR_VLD (0x1 << 0) -#define IOC4_PCI_ERR_ADDR_MST_ID_MSK (0xf << 1) -#define IOC4_PCI_ERR_ADDR_MST_NUM_MSK (0xe << 1) -#define IOC4_PCI_ERR_ADDR_MST_TYP_MSK (0x1 << 1) -#define IOC4_PCI_ERR_ADDR_MUL_ERR (0x1 << 5) -#define IOC4_PCI_ERR_ADDR_ADDR_MSK (0x3ffffff << 6) - -/* Interrupt types */ -#define IOC4_SIO_INTR_TYPE 0 -#define IOC4_OTHER_INTR_TYPE 1 -#define IOC4_NUM_INTR_TYPES 2 - -/* Bitmasks for IOC4_SIO_IR, IOC4_SIO_IEC, and IOC4_SIO_IES */ -#define IOC4_SIO_IR_S0_TX_MT 0x00000001 /* Serial port 0 TX empty */ -#define IOC4_SIO_IR_S0_RX_FULL 0x00000002 /* Port 0 RX buf full */ -#define IOC4_SIO_IR_S0_RX_HIGH 0x00000004 /* Port 0 RX hiwat */ -#define IOC4_SIO_IR_S0_RX_TIMER 0x00000008 /* Port 0 RX timeout */ -#define IOC4_SIO_IR_S0_DELTA_DCD 0x00000010 /* Port 0 delta DCD */ -#define IOC4_SIO_IR_S0_DELTA_CTS 0x00000020 /* Port 0 delta CTS */ -#define IOC4_SIO_IR_S0_INT 0x00000040 /* Port 0 pass-thru intr */ -#define IOC4_SIO_IR_S0_TX_EXPLICIT 0x00000080 /* Port 0 explicit TX thru */ -#define IOC4_SIO_IR_S1_TX_MT 0x00000100 /* Serial port 1 */ -#define IOC4_SIO_IR_S1_RX_FULL 0x00000200 /* */ -#define IOC4_SIO_IR_S1_RX_HIGH 0x00000400 /* */ -#define IOC4_SIO_IR_S1_RX_TIMER 0x00000800 /* */ -#define IOC4_SIO_IR_S1_DELTA_DCD 0x00001000 /* */ -#define IOC4_SIO_IR_S1_DELTA_CTS 0x00002000 /* */ -#define IOC4_SIO_IR_S1_INT 0x00004000 /* */ -#define IOC4_SIO_IR_S1_TX_EXPLICIT 0x00008000 /* */ -#define IOC4_SIO_IR_S2_TX_MT 0x00010000 /* Serial port 2 */ -#define IOC4_SIO_IR_S2_RX_FULL 0x00020000 /* */ -#define IOC4_SIO_IR_S2_RX_HIGH 0x00040000 /* */ -#define IOC4_SIO_IR_S2_RX_TIMER 0x00080000 /* */ -#define IOC4_SIO_IR_S2_DELTA_DCD 0x00100000 /* */ -#define IOC4_SIO_IR_S2_DELTA_CTS 0x00200000 /* */ -#define IOC4_SIO_IR_S2_INT 0x00400000 /* */ -#define IOC4_SIO_IR_S2_TX_EXPLICIT 0x00800000 /* */ -#define IOC4_SIO_IR_S3_TX_MT 0x01000000 /* Serial port 3 */ -#define IOC4_SIO_IR_S3_RX_FULL 0x02000000 /* */ -#define IOC4_SIO_IR_S3_RX_HIGH 0x04000000 /* */ -#define IOC4_SIO_IR_S3_RX_TIMER 0x08000000 /* */ -#define IOC4_SIO_IR_S3_DELTA_DCD 0x10000000 /* */ -#define IOC4_SIO_IR_S3_DELTA_CTS 0x20000000 /* */ -#define IOC4_SIO_IR_S3_INT 0x40000000 /* */ -#define IOC4_SIO_IR_S3_TX_EXPLICIT 0x80000000 /* */ - -/* Per device interrupt masks */ -#define IOC4_SIO_IR_S0 (IOC4_SIO_IR_S0_TX_MT | \ - IOC4_SIO_IR_S0_RX_FULL | \ - IOC4_SIO_IR_S0_RX_HIGH | \ - IOC4_SIO_IR_S0_RX_TIMER | \ - IOC4_SIO_IR_S0_DELTA_DCD | \ - IOC4_SIO_IR_S0_DELTA_CTS | \ - IOC4_SIO_IR_S0_INT | \ - IOC4_SIO_IR_S0_TX_EXPLICIT) -#define IOC4_SIO_IR_S1 (IOC4_SIO_IR_S1_TX_MT | \ - IOC4_SIO_IR_S1_RX_FULL | \ - IOC4_SIO_IR_S1_RX_HIGH | \ - IOC4_SIO_IR_S1_RX_TIMER | \ - IOC4_SIO_IR_S1_DELTA_DCD | \ - IOC4_SIO_IR_S1_DELTA_CTS | \ - IOC4_SIO_IR_S1_INT | \ - IOC4_SIO_IR_S1_TX_EXPLICIT) -#define IOC4_SIO_IR_S2 (IOC4_SIO_IR_S2_TX_MT | \ - IOC4_SIO_IR_S2_RX_FULL | \ - IOC4_SIO_IR_S2_RX_HIGH | \ - IOC4_SIO_IR_S2_RX_TIMER | \ - IOC4_SIO_IR_S2_DELTA_DCD | \ - IOC4_SIO_IR_S2_DELTA_CTS | \ - IOC4_SIO_IR_S2_INT | \ - IOC4_SIO_IR_S2_TX_EXPLICIT) -#define IOC4_SIO_IR_S3 (IOC4_SIO_IR_S3_TX_MT | \ - IOC4_SIO_IR_S3_RX_FULL | \ - IOC4_SIO_IR_S3_RX_HIGH | \ - IOC4_SIO_IR_S3_RX_TIMER | \ - IOC4_SIO_IR_S3_DELTA_DCD | \ - IOC4_SIO_IR_S3_DELTA_CTS | \ - IOC4_SIO_IR_S3_INT | \ - IOC4_SIO_IR_S3_TX_EXPLICIT) - -/* Bitmasks for IOC4_OTHER_IR, IOC4_OTHER_IEC, and IOC4_OTHER_IES */ -#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */ -#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */ -#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */ -#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */ -#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */ -#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */ -#define IOC4_OTHER_IR_KBD_INT 0x00000040 /* Keyboard/mouse */ -#define IOC4_OTHER_IR_RESERVED 0x007fff80 /* Reserved */ -#define IOC4_OTHER_IR_RT_INT 0x00800000 /* INT_OUT section output */ -#define IOC4_OTHER_IR_GEN_INT 0xff000000 /* Generic pins */ - -#define IOC4_OTHER_IR_SER_MEMERR (IOC4_OTHER_IR_S0_MEMERR | IOC4_OTHER_IR_S1_MEMERR | \ - IOC4_OTHER_IR_S2_MEMERR | IOC4_OTHER_IR_S3_MEMERR) - -/* Bitmasks for IOC4_SIO_CR */ -#define IOC4_SIO_CR_CMD_PULSE_SHIFT 0 /* byte bus strobe shift */ -#define IOC4_SIO_CR_ARB_DIAG_TX0 0x00000000 -#define IOC4_SIO_CR_ARB_DIAG_RX0 0x00000010 -#define IOC4_SIO_CR_ARB_DIAG_TX1 0x00000020 -#define IOC4_SIO_CR_ARB_DIAG_RX1 0x00000030 -#define IOC4_SIO_CR_ARB_DIAG_TX2 0x00000040 -#define IOC4_SIO_CR_ARB_DIAG_RX2 0x00000050 -#define IOC4_SIO_CR_ARB_DIAG_TX3 0x00000060 -#define IOC4_SIO_CR_ARB_DIAG_RX3 0x00000070 -#define IOC4_SIO_CR_SIO_DIAG_IDLE 0x00000080 /* 0 -> active request among - serial ports (ro) */ -/* Defs for some of the generic I/O pins */ -#define IOC4_GPCR_UART0_MODESEL 0x10 /* Pin is output to port 0 - mode sel */ -#define IOC4_GPCR_UART1_MODESEL 0x20 /* Pin is output to port 1 - mode sel */ -#define IOC4_GPCR_UART2_MODESEL 0x40 /* Pin is output to port 2 - mode sel */ -#define IOC4_GPCR_UART3_MODESEL 0x80 /* Pin is output to port 3 - mode sel */ - -#define IOC4_GPPR_UART0_MODESEL_PIN 4 /* GIO pin controlling - uart 0 mode select */ -#define IOC4_GPPR_UART1_MODESEL_PIN 5 /* GIO pin controlling - uart 1 mode select */ -#define IOC4_GPPR_UART2_MODESEL_PIN 6 /* GIO pin controlling - uart 2 mode select */ -#define IOC4_GPPR_UART3_MODESEL_PIN 7 /* GIO pin controlling - uart 3 mode select */ - -/* Bitmasks for serial RX status byte */ -#define IOC4_RXSB_OVERRUN 0x01 /* Char(s) lost */ -#define IOC4_RXSB_PAR_ERR 0x02 /* Parity error */ -#define IOC4_RXSB_FRAME_ERR 0x04 /* Framing error */ -#define IOC4_RXSB_BREAK 0x08 /* Break character */ -#define IOC4_RXSB_CTS 0x10 /* State of CTS */ -#define IOC4_RXSB_DCD 0x20 /* State of DCD */ -#define IOC4_RXSB_MODEM_VALID 0x40 /* DCD, CTS, and OVERRUN are valid */ -#define IOC4_RXSB_DATA_VALID 0x80 /* Data byte, FRAME_ERR PAR_ERR - * & BREAK valid */ - -/* Bitmasks for serial TX control byte */ -#define IOC4_TXCB_INT_WHEN_DONE 0x20 /* Interrupt after this byte is sent */ -#define IOC4_TXCB_INVALID 0x00 /* Byte is invalid */ -#define IOC4_TXCB_VALID 0x40 /* Byte is valid */ -#define IOC4_TXCB_MCR 0x80 /* Data<7:0> to modem control reg */ -#define IOC4_TXCB_DELAY 0xc0 /* Delay data<7:0> mSec */ - -/* Bitmasks for IOC4_SBBR_L */ -#define IOC4_SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */ - -/* Bitmasks for IOC4_SSCR_<3:0> */ -#define IOC4_SSCR_RX_THRESHOLD 0x000001ff /* Hiwater mark */ -#define IOC4_SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */ -#define IOC4_SSCR_HFC_EN 0x00020000 /* Hardware flow control enabled */ -#define IOC4_SSCR_RX_RING_DCD 0x00040000 /* Post RX record on delta-DCD */ -#define IOC4_SSCR_RX_RING_CTS 0x00080000 /* Post RX record on delta-CTS */ -#define IOC4_SSCR_DIAG 0x00200000 /* Bypass clock divider for sim */ -#define IOC4_SSCR_RX_DRAIN 0x08000000 /* Drain RX buffer to memory */ -#define IOC4_SSCR_DMA_EN 0x10000000 /* Enable ring buffer DMA */ -#define IOC4_SSCR_DMA_PAUSE 0x20000000 /* Pause DMA */ -#define IOC4_SSCR_PAUSE_STATE 0x40000000 /* Sets when PAUSE takes effect */ -#define IOC4_SSCR_RESET 0x80000000 /* Reset DMA channels */ - -/* All producer/comsumer pointers are the same bitfield */ -#define IOC4_PROD_CONS_PTR_4K 0x00000ff8 /* For 4K buffers */ -#define IOC4_PROD_CONS_PTR_1K 0x000003f8 /* For 1K buffers */ -#define IOC4_PROD_CONS_PTR_OFF 3 - -/* Bitmasks for IOC4_SRCIR_<3:0> */ -#define IOC4_SRCIR_ARM 0x80000000 /* Arm RX timer */ - -/* Bitmasks for IOC4_SHADOW_<3:0> */ -#define IOC4_SHADOW_DR 0x00000001 /* Data ready */ -#define IOC4_SHADOW_OE 0x00000002 /* Overrun error */ -#define IOC4_SHADOW_PE 0x00000004 /* Parity error */ -#define IOC4_SHADOW_FE 0x00000008 /* Framing error */ -#define IOC4_SHADOW_BI 0x00000010 /* Break interrupt */ -#define IOC4_SHADOW_THRE 0x00000020 /* Xmit holding register empty */ -#define IOC4_SHADOW_TEMT 0x00000040 /* Xmit shift register empty */ -#define IOC4_SHADOW_RFCE 0x00000080 /* Char in RX fifo has an error */ -#define IOC4_SHADOW_DCTS 0x00010000 /* Delta clear to send */ -#define IOC4_SHADOW_DDCD 0x00080000 /* Delta data carrier detect */ -#define IOC4_SHADOW_CTS 0x00100000 /* Clear to send */ -#define IOC4_SHADOW_DCD 0x00800000 /* Data carrier detect */ -#define IOC4_SHADOW_DTR 0x01000000 /* Data terminal ready */ -#define IOC4_SHADOW_RTS 0x02000000 /* Request to send */ -#define IOC4_SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */ -#define IOC4_SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */ -#define IOC4_SHADOW_LOOP 0x10000000 /* Loopback enabled */ - -/* Bitmasks for IOC4_SRTR_<3:0> */ -#define IOC4_SRTR_CNT 0x00000fff /* Reload value for RX timer */ -#define IOC4_SRTR_CNT_VAL 0x0fff0000 /* Current value of RX timer */ -#define IOC4_SRTR_CNT_VAL_SHIFT 16 -#define IOC4_SRTR_HZ 16000 /* SRTR clock frequency */ - -/* Serial port register map used for DMA and PIO serial I/O */ -struct ioc4_serialregs { - uint32_t sscr; - uint32_t stpir; - uint32_t stcir; - uint32_t srpir; - uint32_t srcir; - uint32_t srtr; - uint32_t shadow; -}; - -/* IOC4 UART register map */ -struct ioc4_uartregs { - char i4u_lcr; - union { - char iir; /* read only */ - char fcr; /* write only */ - } u3; - union { - char ier; /* DLAB == 0 */ - char dlm; /* DLAB == 1 */ - } u2; - union { - char rbr; /* read only, DLAB == 0 */ - char thr; /* write only, DLAB == 0 */ - char dll; /* DLAB == 1 */ - } u1; - char i4u_scr; - char i4u_msr; - char i4u_lsr; - char i4u_mcr; -}; - -/* short names */ -#define i4u_dll u1.dll -#define i4u_ier u2.ier -#define i4u_dlm u2.dlm -#define i4u_fcr u3.fcr - -/* Serial port registers used for DMA serial I/O */ -struct ioc4_serial { - uint32_t sbbr01_l; - uint32_t sbbr01_h; - uint32_t sbbr23_l; - uint32_t sbbr23_h; - - struct ioc4_serialregs port_0; - struct ioc4_serialregs port_1; - struct ioc4_serialregs port_2; - struct ioc4_serialregs port_3; - struct ioc4_uartregs uart_0; - struct ioc4_uartregs uart_1; - struct ioc4_uartregs uart_2; - struct ioc4_uartregs uart_3; -} ioc4_serial; - -/* UART clock speed */ -#define IOC4_SER_XIN_CLK_66 66666667 -#define IOC4_SER_XIN_CLK_33 33333333 - -#define IOC4_W_IES 0 -#define IOC4_W_IEC 1 - -typedef void ioc4_intr_func_f(void *, uint32_t); -typedef ioc4_intr_func_f *ioc4_intr_func_t; - -static unsigned int Num_of_ioc4_cards; - -/* defining this will get you LOTS of great debug info */ -//#define DEBUG_INTERRUPTS -#define DPRINT_CONFIG(_x...) ; -//#define DPRINT_CONFIG(_x...) printk _x - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 - -/* number of characters we want to transmit to the lower level at a time */ -#define IOC4_MAX_CHARS 256 -#define IOC4_FIFO_CHARS 255 - -/* Device name we're using */ -#define DEVICE_NAME_RS232 "ttyIOC" -#define DEVICE_NAME_RS422 "ttyAIOC" -#define DEVICE_MAJOR 204 -#define DEVICE_MINOR_RS232 50 -#define DEVICE_MINOR_RS422 84 - - -/* register offsets */ -#define IOC4_SERIAL_OFFSET 0x300 - -/* flags for next_char_state */ -#define NCS_BREAK 0x1 -#define NCS_PARITY 0x2 -#define NCS_FRAMING 0x4 -#define NCS_OVERRUN 0x8 - -/* cause we need SOME parameters ... */ -#define MIN_BAUD_SUPPORTED 1200 -#define MAX_BAUD_SUPPORTED 115200 - -/* protocol types supported */ -#define PROTO_RS232 3 -#define PROTO_RS422 7 - -/* Notification types */ -#define N_DATA_READY 0x01 -#define N_OUTPUT_LOWAT 0x02 -#define N_BREAK 0x04 -#define N_PARITY_ERROR 0x08 -#define N_FRAMING_ERROR 0x10 -#define N_OVERRUN_ERROR 0x20 -#define N_DDCD 0x40 -#define N_DCTS 0x80 - -#define N_ALL_INPUT (N_DATA_READY | N_BREAK | \ - N_PARITY_ERROR | N_FRAMING_ERROR | \ - N_OVERRUN_ERROR | N_DDCD | N_DCTS) - -#define N_ALL_OUTPUT N_OUTPUT_LOWAT - -#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR | N_OVERRUN_ERROR) - -#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK | \ - N_PARITY_ERROR | N_FRAMING_ERROR | \ - N_OVERRUN_ERROR | N_DDCD | N_DCTS) - -#define SER_DIVISOR(_x, clk) (((clk) + (_x) * 8) / ((_x) * 16)) -#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div)) - -/* Some masks */ -#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \ - | UART_LCR_WLEN7 | UART_LCR_WLEN8) -#define LCR_MASK_STOP_BITS (UART_LCR_STOP) - -#define PENDING(_p) (readl(&(_p)->ip_mem->sio_ir.raw) & _p->ip_ienb) -#define READ_SIO_IR(_p) readl(&(_p)->ip_mem->sio_ir.raw) - -/* Default to 4k buffers */ -#ifdef IOC4_1K_BUFFERS -#define RING_BUF_SIZE 1024 -#define IOC4_BUF_SIZE_BIT 0 -#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_1K -#else -#define RING_BUF_SIZE 4096 -#define IOC4_BUF_SIZE_BIT IOC4_SBBR_L_SIZE -#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_4K -#endif - -#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4) - -/* - * This is the entry saved by the driver - one per card - */ - -#define UART_PORT_MIN 0 -#define UART_PORT_RS232 UART_PORT_MIN -#define UART_PORT_RS422 1 -#define UART_PORT_COUNT 2 /* one for each mode */ - -struct ioc4_control { - int ic_irq; - struct { - /* uart ports are allocated here - 1 for rs232, 1 for rs422 */ - struct uart_port icp_uart_port[UART_PORT_COUNT]; - /* Handy reference material */ - struct ioc4_port *icp_port; - } ic_port[IOC4_NUM_SERIAL_PORTS]; - struct ioc4_soft *ic_soft; -}; - -/* - * per-IOC4 data structure - */ -#define MAX_IOC4_INTR_ENTS (8 * sizeof(uint32_t)) -struct ioc4_soft { - struct ioc4_misc_regs __iomem *is_ioc4_misc_addr; - struct ioc4_serial __iomem *is_ioc4_serial_addr; - - /* Each interrupt type has an entry in the array */ - struct ioc4_intr_type { - - /* - * Each in-use entry in this array contains at least - * one nonzero bit in sd_bits; no two entries in this - * array have overlapping sd_bits values. - */ - struct ioc4_intr_info { - uint32_t sd_bits; - ioc4_intr_func_f *sd_intr; - void *sd_info; - } is_intr_info[MAX_IOC4_INTR_ENTS]; - - /* Number of entries active in the above array */ - atomic_t is_num_intrs; - } is_intr_type[IOC4_NUM_INTR_TYPES]; - - /* is_ir_lock must be held while - * modifying sio_ie values, so - * we can be sure that sio_ie is - * not changing when we read it - * along with sio_ir. - */ - spinlock_t is_ir_lock; /* SIO_IE[SC] mod lock */ -}; - -/* Local port info for each IOC4 serial ports */ -struct ioc4_port { - struct uart_port *ip_port; /* current active port ptr */ - /* Ptrs for all ports */ - struct uart_port *ip_all_ports[UART_PORT_COUNT]; - /* Back ptrs for this port */ - struct ioc4_control *ip_control; - struct pci_dev *ip_pdev; - struct ioc4_soft *ip_ioc4_soft; - - /* pci mem addresses */ - struct ioc4_misc_regs __iomem *ip_mem; - struct ioc4_serial __iomem *ip_serial; - struct ioc4_serialregs __iomem *ip_serial_regs; - struct ioc4_uartregs __iomem *ip_uart_regs; - - /* Ring buffer page for this port */ - dma_addr_t ip_dma_ringbuf; - /* vaddr of ring buffer */ - struct ring_buffer *ip_cpu_ringbuf; - - /* Rings for this port */ - struct ring *ip_inring; - struct ring *ip_outring; - - /* Hook to port specific values */ - struct hooks *ip_hooks; - - spinlock_t ip_lock; - - /* Various rx/tx parameters */ - int ip_baud; - int ip_tx_lowat; - int ip_rx_timeout; - - /* Copy of notification bits */ - int ip_notify; - - /* Shadow copies of various registers so we don't need to PIO - * read them constantly - */ - uint32_t ip_ienb; /* Enabled interrupts */ - uint32_t ip_sscr; - uint32_t ip_tx_prod; - uint32_t ip_rx_cons; - int ip_pci_bus_speed; - unsigned char ip_flags; -}; - -/* tx low water mark. We need to notify the driver whenever tx is getting - * close to empty so it can refill the tx buffer and keep things going. - * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll - * have no trouble getting in more chars in time (I certainly hope so). - */ -#define TX_LOWAT_LATENCY 1000 -#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY) -#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ) - -/* Flags per port */ -#define INPUT_HIGH 0x01 -#define DCD_ON 0x02 -#define LOWAT_WRITTEN 0x04 -#define READ_ABORTED 0x08 -#define PORT_ACTIVE 0x10 -#define PORT_INACTIVE 0 /* This is the value when "off" */ - - -/* Since each port has different register offsets and bitmasks - * for everything, we'll store those that we need in tables so we - * don't have to be constantly checking the port we are dealing with. - */ -struct hooks { - uint32_t intr_delta_dcd; - uint32_t intr_delta_cts; - uint32_t intr_tx_mt; - uint32_t intr_rx_timer; - uint32_t intr_rx_high; - uint32_t intr_tx_explicit; - uint32_t intr_dma_error; - uint32_t intr_clear; - uint32_t intr_all; - int rs422_select_pin; -}; - -static struct hooks hooks_array[IOC4_NUM_SERIAL_PORTS] = { - /* Values for port 0 */ - { - IOC4_SIO_IR_S0_DELTA_DCD, IOC4_SIO_IR_S0_DELTA_CTS, - IOC4_SIO_IR_S0_TX_MT, IOC4_SIO_IR_S0_RX_TIMER, - IOC4_SIO_IR_S0_RX_HIGH, IOC4_SIO_IR_S0_TX_EXPLICIT, - IOC4_OTHER_IR_S0_MEMERR, - (IOC4_SIO_IR_S0_TX_MT | IOC4_SIO_IR_S0_RX_FULL | - IOC4_SIO_IR_S0_RX_HIGH | IOC4_SIO_IR_S0_RX_TIMER | - IOC4_SIO_IR_S0_DELTA_DCD | IOC4_SIO_IR_S0_DELTA_CTS | - IOC4_SIO_IR_S0_INT | IOC4_SIO_IR_S0_TX_EXPLICIT), - IOC4_SIO_IR_S0, IOC4_GPPR_UART0_MODESEL_PIN, - }, - - /* Values for port 1 */ - { - IOC4_SIO_IR_S1_DELTA_DCD, IOC4_SIO_IR_S1_DELTA_CTS, - IOC4_SIO_IR_S1_TX_MT, IOC4_SIO_IR_S1_RX_TIMER, - IOC4_SIO_IR_S1_RX_HIGH, IOC4_SIO_IR_S1_TX_EXPLICIT, - IOC4_OTHER_IR_S1_MEMERR, - (IOC4_SIO_IR_S1_TX_MT | IOC4_SIO_IR_S1_RX_FULL | - IOC4_SIO_IR_S1_RX_HIGH | IOC4_SIO_IR_S1_RX_TIMER | - IOC4_SIO_IR_S1_DELTA_DCD | IOC4_SIO_IR_S1_DELTA_CTS | - IOC4_SIO_IR_S1_INT | IOC4_SIO_IR_S1_TX_EXPLICIT), - IOC4_SIO_IR_S1, IOC4_GPPR_UART1_MODESEL_PIN, - }, - - /* Values for port 2 */ - { - IOC4_SIO_IR_S2_DELTA_DCD, IOC4_SIO_IR_S2_DELTA_CTS, - IOC4_SIO_IR_S2_TX_MT, IOC4_SIO_IR_S2_RX_TIMER, - IOC4_SIO_IR_S2_RX_HIGH, IOC4_SIO_IR_S2_TX_EXPLICIT, - IOC4_OTHER_IR_S2_MEMERR, - (IOC4_SIO_IR_S2_TX_MT | IOC4_SIO_IR_S2_RX_FULL | - IOC4_SIO_IR_S2_RX_HIGH | IOC4_SIO_IR_S2_RX_TIMER | - IOC4_SIO_IR_S2_DELTA_DCD | IOC4_SIO_IR_S2_DELTA_CTS | - IOC4_SIO_IR_S2_INT | IOC4_SIO_IR_S2_TX_EXPLICIT), - IOC4_SIO_IR_S2, IOC4_GPPR_UART2_MODESEL_PIN, - }, - - /* Values for port 3 */ - { - IOC4_SIO_IR_S3_DELTA_DCD, IOC4_SIO_IR_S3_DELTA_CTS, - IOC4_SIO_IR_S3_TX_MT, IOC4_SIO_IR_S3_RX_TIMER, - IOC4_SIO_IR_S3_RX_HIGH, IOC4_SIO_IR_S3_TX_EXPLICIT, - IOC4_OTHER_IR_S3_MEMERR, - (IOC4_SIO_IR_S3_TX_MT | IOC4_SIO_IR_S3_RX_FULL | - IOC4_SIO_IR_S3_RX_HIGH | IOC4_SIO_IR_S3_RX_TIMER | - IOC4_SIO_IR_S3_DELTA_DCD | IOC4_SIO_IR_S3_DELTA_CTS | - IOC4_SIO_IR_S3_INT | IOC4_SIO_IR_S3_TX_EXPLICIT), - IOC4_SIO_IR_S3, IOC4_GPPR_UART3_MODESEL_PIN, - } -}; - -/* A ring buffer entry */ -struct ring_entry { - union { - struct { - uint32_t alldata; - uint32_t allsc; - } all; - struct { - char data[4]; /* data bytes */ - char sc[4]; /* status/control */ - } s; - } u; -}; - -/* Test the valid bits in any of the 4 sc chars using "allsc" member */ -#define RING_ANY_VALID \ - ((uint32_t)(IOC4_RXSB_MODEM_VALID | IOC4_RXSB_DATA_VALID) * 0x01010101) - -#define ring_sc u.s.sc -#define ring_data u.s.data -#define ring_allsc u.all.allsc - -/* Number of entries per ring buffer. */ -#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry)) - -/* An individual ring */ -struct ring { - struct ring_entry entries[ENTRIES_PER_RING]; -}; - -/* The whole enchilada */ -struct ring_buffer { - struct ring TX_0_OR_2; - struct ring RX_0_OR_2; - struct ring TX_1_OR_3; - struct ring RX_1_OR_3; -}; - -/* Get a ring from a port struct */ -#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh) - -/* Infinite loop detection. - */ -#define MAXITER 10000000 - -/* Prototypes */ -static void receive_chars(struct uart_port *); -static void handle_intr(void *arg, uint32_t sio_ir); - -/* - * port_is_active - determines if this port is currently active - * @port: ptr to soft struct for this port - * @uart_port: uart port to test for - */ -static inline int port_is_active(struct ioc4_port *port, - struct uart_port *uart_port) -{ - if (port) { - if ((port->ip_flags & PORT_ACTIVE) - && (port->ip_port == uart_port)) - return 1; - } - return 0; -} - - -/** - * write_ireg - write the interrupt regs - * @ioc4_soft: ptr to soft struct for this port - * @val: value to write - * @which: which register - * @type: which ireg set - */ -static inline void -write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type) -{ - struct ioc4_misc_regs __iomem *mem = ioc4_soft->is_ioc4_misc_addr; - unsigned long flags; - - spin_lock_irqsave(&ioc4_soft->is_ir_lock, flags); - - switch (type) { - case IOC4_SIO_INTR_TYPE: - switch (which) { - case IOC4_W_IES: - writel(val, &mem->sio_ies.raw); - break; - - case IOC4_W_IEC: - writel(val, &mem->sio_iec.raw); - break; - } - break; - - case IOC4_OTHER_INTR_TYPE: - switch (which) { - case IOC4_W_IES: - writel(val, &mem->other_ies.raw); - break; - - case IOC4_W_IEC: - writel(val, &mem->other_iec.raw); - break; - } - break; - - default: - break; - } - spin_unlock_irqrestore(&ioc4_soft->is_ir_lock, flags); -} - -/** - * set_baud - Baud rate setting code - * @port: port to set - * @baud: baud rate to use - */ -static int set_baud(struct ioc4_port *port, int baud) -{ - int actual_baud; - int diff; - int lcr; - unsigned short divisor; - struct ioc4_uartregs __iomem *uart; - - divisor = SER_DIVISOR(baud, port->ip_pci_bus_speed); - if (!divisor) - return 1; - actual_baud = DIVISOR_TO_BAUD(divisor, port->ip_pci_bus_speed); - - diff = actual_baud - baud; - if (diff < 0) - diff = -diff; - - /* If we're within 1%, we've found a match */ - if (diff * 100 > actual_baud) - return 1; - - uart = port->ip_uart_regs; - lcr = readb(&uart->i4u_lcr); - writeb(lcr | UART_LCR_DLAB, &uart->i4u_lcr); - writeb((unsigned char)divisor, &uart->i4u_dll); - writeb((unsigned char)(divisor >> 8), &uart->i4u_dlm); - writeb(lcr, &uart->i4u_lcr); - return 0; -} - - -/** - * get_ioc4_port - given a uart port, return the control structure - * @port: uart port - * @set: set this port as current - */ -static struct ioc4_port *get_ioc4_port(struct uart_port *the_port, int set) -{ - struct ioc4_driver_data *idd = dev_get_drvdata(the_port->dev); - struct ioc4_control *control = idd->idd_serial_data; - struct ioc4_port *port; - int port_num, port_type; - - if (control) { - for ( port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; - port_num++ ) { - port = control->ic_port[port_num].icp_port; - if (!port) - continue; - for (port_type = UART_PORT_MIN; - port_type < UART_PORT_COUNT; - port_type++) { - if (the_port == port->ip_all_ports - [port_type]) { - /* set local copy */ - if (set) { - port->ip_port = the_port; - } - return port; - } - } - } - } - return NULL; -} - -/* The IOC4 hardware provides no atomic way to determine if interrupts - * are pending since two reads are required to do so. The handler must - * read the SIO_IR and the SIO_IES, and take the logical and of the - * two. When this value is zero, all interrupts have been serviced and - * the handler may return. - * - * This has the unfortunate "hole" that, if some other CPU or - * some other thread or some higher level interrupt manages to - * modify SIO_IE between our reads of SIO_IR and SIO_IE, we may - * think we have observed SIO_IR&SIO_IE==0 when in fact this - * condition never really occurred. - * - * To solve this, we use a simple spinlock that must be held - * whenever modifying SIO_IE; holding this lock while observing - * both SIO_IR and SIO_IE guarantees that we do not falsely - * conclude that no enabled interrupts are pending. - */ - -static inline uint32_t -pending_intrs(struct ioc4_soft *soft, int type) -{ - struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr; - unsigned long flag; - uint32_t intrs = 0; - - BUG_ON(!((type == IOC4_SIO_INTR_TYPE) - || (type == IOC4_OTHER_INTR_TYPE))); - - spin_lock_irqsave(&soft->is_ir_lock, flag); - - switch (type) { - case IOC4_SIO_INTR_TYPE: - intrs = readl(&mem->sio_ir.raw) & readl(&mem->sio_ies.raw); - break; - - case IOC4_OTHER_INTR_TYPE: - intrs = readl(&mem->other_ir.raw) & readl(&mem->other_ies.raw); - - /* Don't process any ATA interrupte */ - intrs &= ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR); - break; - - default: - break; - } - spin_unlock_irqrestore(&soft->is_ir_lock, flag); - return intrs; -} - -/** - * port_init - Initialize the sio and ioc4 hardware for a given port - * called per port from attach... - * @port: port to initialize - */ -static int inline port_init(struct ioc4_port *port) -{ - uint32_t sio_cr; - struct hooks *hooks = port->ip_hooks; - struct ioc4_uartregs __iomem *uart; - - /* Idle the IOC4 serial interface */ - writel(IOC4_SSCR_RESET, &port->ip_serial_regs->sscr); - - /* Wait until any pending bus activity for this port has ceased */ - do - sio_cr = readl(&port->ip_mem->sio_cr.raw); - while (!(sio_cr & IOC4_SIO_CR_SIO_DIAG_IDLE)); - - /* Finish reset sequence */ - writel(0, &port->ip_serial_regs->sscr); - - /* Once RESET is done, reload cached tx_prod and rx_cons values - * and set rings to empty by making prod == cons - */ - port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; - writel(port->ip_tx_prod, &port->ip_serial_regs->stpir); - port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; - writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir); - - /* Disable interrupts for this 16550 */ - uart = port->ip_uart_regs; - writeb(0, &uart->i4u_lcr); - writeb(0, &uart->i4u_ier); - - /* Set the default baud */ - set_baud(port, port->ip_baud); - - /* Set line control to 8 bits no parity */ - writeb(UART_LCR_WLEN8 | 0, &uart->i4u_lcr); - /* UART_LCR_STOP == 1 stop */ - - /* Enable the FIFOs */ - writeb(UART_FCR_ENABLE_FIFO, &uart->i4u_fcr); - /* then reset 16550 FIFOs */ - writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, - &uart->i4u_fcr); - - /* Clear modem control register */ - writeb(0, &uart->i4u_mcr); - - /* Clear deltas in modem status register */ - readb(&uart->i4u_msr); - - /* Only do this once per port pair */ - if (port->ip_hooks == &hooks_array[0] - || port->ip_hooks == &hooks_array[2]) { - unsigned long ring_pci_addr; - uint32_t __iomem *sbbr_l; - uint32_t __iomem *sbbr_h; - - if (port->ip_hooks == &hooks_array[0]) { - sbbr_l = &port->ip_serial->sbbr01_l; - sbbr_h = &port->ip_serial->sbbr01_h; - } else { - sbbr_l = &port->ip_serial->sbbr23_l; - sbbr_h = &port->ip_serial->sbbr23_h; - } - - ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf; - DPRINT_CONFIG(("%s: ring_pci_addr 0x%lx\n", - __func__, ring_pci_addr)); - - writel((unsigned int)((uint64_t)ring_pci_addr >> 32), sbbr_h); - writel((unsigned int)ring_pci_addr | IOC4_BUF_SIZE_BIT, sbbr_l); - } - - /* Set the receive timeout value to 10 msec */ - writel(IOC4_SRTR_HZ / 100, &port->ip_serial_regs->srtr); - - /* Set rx threshold, enable DMA */ - /* Set high water mark at 3/4 of full ring */ - port->ip_sscr = (ENTRIES_PER_RING * 3 / 4); - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - - /* Disable and clear all serial related interrupt bits */ - write_ireg(port->ip_ioc4_soft, hooks->intr_clear, - IOC4_W_IEC, IOC4_SIO_INTR_TYPE); - port->ip_ienb &= ~hooks->intr_clear; - writel(hooks->intr_clear, &port->ip_mem->sio_ir.raw); - return 0; -} - -/** - * handle_dma_error_intr - service any pending DMA error interrupts for the - * given port - 2nd level called via sd_intr - * @arg: handler arg - * @other_ir: ioc4regs - */ -static void handle_dma_error_intr(void *arg, uint32_t other_ir) -{ - struct ioc4_port *port = (struct ioc4_port *)arg; - struct hooks *hooks = port->ip_hooks; - unsigned long flags; - - spin_lock_irqsave(&port->ip_lock, flags); - - /* ACK the interrupt */ - writel(hooks->intr_dma_error, &port->ip_mem->other_ir.raw); - - if (readl(&port->ip_mem->pci_err_addr_l.raw) & IOC4_PCI_ERR_ADDR_VLD) { - printk(KERN_ERR - "PCI error address is 0x%llx, " - "master is serial port %c %s\n", - (((uint64_t)readl(&port->ip_mem->pci_err_addr_h) - << 32) - | readl(&port->ip_mem->pci_err_addr_l.raw)) - & IOC4_PCI_ERR_ADDR_ADDR_MSK, '1' + - ((char)(readl(&port->ip_mem->pci_err_addr_l.raw) & - IOC4_PCI_ERR_ADDR_MST_NUM_MSK) >> 1), - (readl(&port->ip_mem->pci_err_addr_l.raw) - & IOC4_PCI_ERR_ADDR_MST_TYP_MSK) - ? "RX" : "TX"); - - if (readl(&port->ip_mem->pci_err_addr_l.raw) - & IOC4_PCI_ERR_ADDR_MUL_ERR) { - printk(KERN_ERR - "Multiple errors occurred\n"); - } - } - spin_unlock_irqrestore(&port->ip_lock, flags); - - /* Re-enable DMA error interrupts */ - write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, IOC4_W_IES, - IOC4_OTHER_INTR_TYPE); -} - -/** - * intr_connect - interrupt connect function - * @soft: soft struct for this card - * @type: interrupt type - * @intrbits: bit pattern to set - * @intr: handler function - * @info: handler arg - */ -static void -intr_connect(struct ioc4_soft *soft, int type, - uint32_t intrbits, ioc4_intr_func_f * intr, void *info) -{ - int i; - struct ioc4_intr_info *intr_ptr; - - BUG_ON(!((type == IOC4_SIO_INTR_TYPE) - || (type == IOC4_OTHER_INTR_TYPE))); - - i = atomic_inc(&soft-> is_intr_type[type].is_num_intrs) - 1; - BUG_ON(!(i < MAX_IOC4_INTR_ENTS || (printk("i %d\n", i), 0))); - - /* Save off the lower level interrupt handler */ - intr_ptr = &soft->is_intr_type[type].is_intr_info[i]; - intr_ptr->sd_bits = intrbits; - intr_ptr->sd_intr = intr; - intr_ptr->sd_info = info; -} - -/** - * ioc4_intr - Top level IOC4 interrupt handler. - * @irq: irq value - * @arg: handler arg - */ - -static irqreturn_t ioc4_intr(int irq, void *arg) -{ - struct ioc4_soft *soft; - uint32_t this_ir, this_mir; - int xx, num_intrs = 0; - int intr_type; - int handled = 0; - struct ioc4_intr_info *intr_info; - - soft = arg; - for (intr_type = 0; intr_type < IOC4_NUM_INTR_TYPES; intr_type++) { - num_intrs = (int)atomic_read( - &soft->is_intr_type[intr_type].is_num_intrs); - - this_mir = this_ir = pending_intrs(soft, intr_type); - - /* Farm out the interrupt to the various drivers depending on - * which interrupt bits are set. - */ - for (xx = 0; xx < num_intrs; xx++) { - intr_info = &soft->is_intr_type[intr_type].is_intr_info[xx]; - if ((this_mir = this_ir & intr_info->sd_bits)) { - /* Disable owned interrupts, call handler */ - handled++; - write_ireg(soft, intr_info->sd_bits, IOC4_W_IEC, - intr_type); - intr_info->sd_intr(intr_info->sd_info, this_mir); - this_ir &= ~this_mir; - } - } - } -#ifdef DEBUG_INTERRUPTS - { - struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr; - unsigned long flag; - - spin_lock_irqsave(&soft->is_ir_lock, flag); - printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies 0x%x " - "other_ir 0x%x other_ies 0x%x mask 0x%x\n", - __func__, __LINE__, - (void *)mem, readl(&mem->sio_ir.raw), - readl(&mem->sio_ies.raw), - readl(&mem->other_ir.raw), - readl(&mem->other_ies.raw), - IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR); - spin_unlock_irqrestore(&soft->is_ir_lock, flag); - } -#endif - return handled ? IRQ_HANDLED : IRQ_NONE; -} - -/** - * ioc4_attach_local - Device initialization. - * Called at *_attach() time for each - * IOC4 with serial ports in the system. - * @idd: Master module data for this IOC4 - */ -static int inline ioc4_attach_local(struct ioc4_driver_data *idd) -{ - struct ioc4_port *port; - struct ioc4_port *ports[IOC4_NUM_SERIAL_PORTS]; - int port_number; - uint16_t ioc4_revid_min = 62; - uint16_t ioc4_revid; - struct pci_dev *pdev = idd->idd_pdev; - struct ioc4_control* control = idd->idd_serial_data; - struct ioc4_soft *soft = control->ic_soft; - void __iomem *ioc4_misc = idd->idd_misc_regs; - void __iomem *ioc4_serial = soft->is_ioc4_serial_addr; - - /* IOC4 firmware must be at least rev 62 */ - pci_read_config_word(pdev, PCI_COMMAND_SPECIAL, &ioc4_revid); - - printk(KERN_INFO "IOC4 firmware revision %d\n", ioc4_revid); - if (ioc4_revid < ioc4_revid_min) { - printk(KERN_WARNING - "IOC4 serial not supported on firmware rev %d, " - "please upgrade to rev %d or higher\n", - ioc4_revid, ioc4_revid_min); - return -EPERM; - } - BUG_ON(ioc4_misc == NULL); - BUG_ON(ioc4_serial == NULL); - - /* Create port structures for each port */ - for (port_number = 0; port_number < IOC4_NUM_SERIAL_PORTS; - port_number++) { - port = kzalloc(sizeof(struct ioc4_port), GFP_KERNEL); - if (!port) { - printk(KERN_WARNING - "IOC4 serial memory not available for port\n"); - return -ENOMEM; - } - spin_lock_init(&port->ip_lock); - - /* we need to remember the previous ones, to point back to - * them farther down - setting up the ring buffers. - */ - ports[port_number] = port; - - /* Allocate buffers and jumpstart the hardware. */ - control->ic_port[port_number].icp_port = port; - port->ip_ioc4_soft = soft; - port->ip_pdev = pdev; - port->ip_ienb = 0; - /* Use baud rate calculations based on detected PCI - * bus speed. Simply test whether the PCI clock is - * running closer to 66MHz or 33MHz. - */ - if (idd->count_period/IOC4_EXTINT_COUNT_DIVISOR < 20) { - port->ip_pci_bus_speed = IOC4_SER_XIN_CLK_66; - } else { - port->ip_pci_bus_speed = IOC4_SER_XIN_CLK_33; - } - port->ip_baud = 9600; - port->ip_control = control; - port->ip_mem = ioc4_misc; - port->ip_serial = ioc4_serial; - - /* point to the right hook */ - port->ip_hooks = &hooks_array[port_number]; - - /* Get direct hooks to the serial regs and uart regs - * for this port - */ - switch (port_number) { - case 0: - port->ip_serial_regs = &(port->ip_serial->port_0); - port->ip_uart_regs = &(port->ip_serial->uart_0); - break; - case 1: - port->ip_serial_regs = &(port->ip_serial->port_1); - port->ip_uart_regs = &(port->ip_serial->uart_1); - break; - case 2: - port->ip_serial_regs = &(port->ip_serial->port_2); - port->ip_uart_regs = &(port->ip_serial->uart_2); - break; - default: - case 3: - port->ip_serial_regs = &(port->ip_serial->port_3); - port->ip_uart_regs = &(port->ip_serial->uart_3); - break; - } - - /* ring buffers are 1 to a pair of ports */ - if (port_number && (port_number & 1)) { - /* odd use the evens buffer */ - port->ip_dma_ringbuf = - ports[port_number - 1]->ip_dma_ringbuf; - port->ip_cpu_ringbuf = - ports[port_number - 1]->ip_cpu_ringbuf; - port->ip_inring = RING(port, RX_1_OR_3); - port->ip_outring = RING(port, TX_1_OR_3); - - } else { - if (port->ip_dma_ringbuf == 0) { - port->ip_cpu_ringbuf = pci_alloc_consistent - (pdev, TOTAL_RING_BUF_SIZE, - &port->ip_dma_ringbuf); - - } - BUG_ON(!((((int64_t)port->ip_dma_ringbuf) & - (TOTAL_RING_BUF_SIZE - 1)) == 0)); - DPRINT_CONFIG(("%s : ip_cpu_ringbuf 0x%p " - "ip_dma_ringbuf 0x%p\n", - __func__, - (void *)port->ip_cpu_ringbuf, - (void *)port->ip_dma_ringbuf)); - port->ip_inring = RING(port, RX_0_OR_2); - port->ip_outring = RING(port, TX_0_OR_2); - } - DPRINT_CONFIG(("%s : port %d [addr 0x%p] control 0x%p", - __func__, - port_number, (void *)port, (void *)control)); - DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n", - (void *)port->ip_serial_regs, - (void *)port->ip_uart_regs)); - - /* Initialize the hardware for IOC4 */ - port_init(port); - - DPRINT_CONFIG(("%s: port_number %d port 0x%p inring 0x%p " - "outring 0x%p\n", - __func__, - port_number, (void *)port, - (void *)port->ip_inring, - (void *)port->ip_outring)); - - /* Attach interrupt handlers */ - intr_connect(soft, IOC4_SIO_INTR_TYPE, - GET_SIO_IR(port_number), - handle_intr, port); - - intr_connect(soft, IOC4_OTHER_INTR_TYPE, - GET_OTHER_IR(port_number), - handle_dma_error_intr, port); - } - return 0; -} - -/** - * enable_intrs - enable interrupts - * @port: port to enable - * @mask: mask to use - */ -static void enable_intrs(struct ioc4_port *port, uint32_t mask) -{ - struct hooks *hooks = port->ip_hooks; - - if ((port->ip_ienb & mask) != mask) { - write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IES, - IOC4_SIO_INTR_TYPE); - port->ip_ienb |= mask; - } - - if (port->ip_ienb) - write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, - IOC4_W_IES, IOC4_OTHER_INTR_TYPE); -} - -/** - * local_open - local open a port - * @port: port to open - */ -static inline int local_open(struct ioc4_port *port) -{ - int spiniter = 0; - - port->ip_flags = PORT_ACTIVE; - - /* Pause the DMA interface if necessary */ - if (port->ip_sscr & IOC4_SSCR_DMA_EN) { - writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, - &port->ip_serial_regs->sscr); - while((readl(&port->ip_serial_regs-> sscr) - & IOC4_SSCR_PAUSE_STATE) == 0) { - spiniter++; - if (spiniter > MAXITER) { - port->ip_flags = PORT_INACTIVE; - return -1; - } - } - } - - /* Reset the input fifo. If the uart received chars while the port - * was closed and DMA is not enabled, the uart may have a bunch of - * chars hanging around in its rx fifo which will not be discarded - * by rclr in the upper layer. We must get rid of them here. - */ - writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR, - &port->ip_uart_regs->i4u_fcr); - - writeb(UART_LCR_WLEN8, &port->ip_uart_regs->i4u_lcr); - /* UART_LCR_STOP == 1 stop */ - - /* Re-enable DMA, set default threshold to intr whenever there is - * data available. - */ - port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD; - port->ip_sscr |= 1; /* default threshold */ - - /* Plug in the new sscr. This implicitly clears the DMA_PAUSE - * flag if it was set above - */ - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - port->ip_tx_lowat = 1; - return 0; -} - -/** - * set_rx_timeout - Set rx timeout and threshold values. - * @port: port to use - * @timeout: timeout value in ticks - */ -static inline int set_rx_timeout(struct ioc4_port *port, int timeout) -{ - int threshold; - - port->ip_rx_timeout = timeout; - - /* Timeout is in ticks. Let's figure out how many chars we - * can receive at the current baud rate in that interval - * and set the rx threshold to that amount. There are 4 chars - * per ring entry, so we'll divide the number of chars that will - * arrive in timeout by 4. - * So .... timeout * baud / 10 / HZ / 4, with HZ = 100. - */ - threshold = timeout * port->ip_baud / 4000; - if (threshold == 0) - threshold = 1; /* otherwise we'll intr all the time! */ - - if ((unsigned)threshold > (unsigned)IOC4_SSCR_RX_THRESHOLD) - return 1; - - port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD; - port->ip_sscr |= threshold; - - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - - /* Now set the rx timeout to the given value - * again timeout * IOC4_SRTR_HZ / HZ - */ - timeout = timeout * IOC4_SRTR_HZ / 100; - if (timeout > IOC4_SRTR_CNT) - timeout = IOC4_SRTR_CNT; - - writel(timeout, &port->ip_serial_regs->srtr); - return 0; -} - -/** - * config_port - config the hardware - * @port: port to config - * @baud: baud rate for the port - * @byte_size: data size - * @stop_bits: number of stop bits - * @parenb: parity enable ? - * @parodd: odd parity ? - */ -static inline int -config_port(struct ioc4_port *port, - int baud, int byte_size, int stop_bits, int parenb, int parodd) -{ - char lcr, sizebits; - int spiniter = 0; - - DPRINT_CONFIG(("%s: baud %d byte_size %d stop %d parenb %d parodd %d\n", - __func__, baud, byte_size, stop_bits, parenb, parodd)); - - if (set_baud(port, baud)) - return 1; - - switch (byte_size) { - case 5: - sizebits = UART_LCR_WLEN5; - break; - case 6: - sizebits = UART_LCR_WLEN6; - break; - case 7: - sizebits = UART_LCR_WLEN7; - break; - case 8: - sizebits = UART_LCR_WLEN8; - break; - default: - return 1; - } - - /* Pause the DMA interface if necessary */ - if (port->ip_sscr & IOC4_SSCR_DMA_EN) { - writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, - &port->ip_serial_regs->sscr); - while((readl(&port->ip_serial_regs->sscr) - & IOC4_SSCR_PAUSE_STATE) == 0) { - spiniter++; - if (spiniter > MAXITER) - return -1; - } - } - - /* Clear relevant fields in lcr */ - lcr = readb(&port->ip_uart_regs->i4u_lcr); - lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR | - UART_LCR_PARITY | LCR_MASK_STOP_BITS); - - /* Set byte size in lcr */ - lcr |= sizebits; - - /* Set parity */ - if (parenb) { - lcr |= UART_LCR_PARITY; - if (!parodd) - lcr |= UART_LCR_EPAR; - } - - /* Set stop bits */ - if (stop_bits) - lcr |= UART_LCR_STOP /* 2 stop bits */ ; - - writeb(lcr, &port->ip_uart_regs->i4u_lcr); - - /* Re-enable the DMA interface if necessary */ - if (port->ip_sscr & IOC4_SSCR_DMA_EN) { - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - port->ip_baud = baud; - - /* When we get within this number of ring entries of filling the - * entire ring on tx, place an EXPLICIT intr to generate a lowat - * notification when output has drained. - */ - port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4; - if (port->ip_tx_lowat == 0) - port->ip_tx_lowat = 1; - - set_rx_timeout(port, 2); - - return 0; -} - -/** - * do_write - Write bytes to the port. Returns the number of bytes - * actually written. Called from transmit_chars - * @port: port to use - * @buf: the stuff to write - * @len: how many bytes in 'buf' - */ -static inline int do_write(struct ioc4_port *port, char *buf, int len) -{ - int prod_ptr, cons_ptr, total = 0; - struct ring *outring; - struct ring_entry *entry; - struct hooks *hooks = port->ip_hooks; - - BUG_ON(!(len >= 0)); - - prod_ptr = port->ip_tx_prod; - cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; - outring = port->ip_outring; - - /* Maintain a 1-entry red-zone. The ring buffer is full when - * (cons - prod) % ring_size is 1. Rather than do this subtraction - * in the body of the loop, I'll do it now. - */ - cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK; - - /* Stuff the bytes into the output */ - while ((prod_ptr != cons_ptr) && (len > 0)) { - int xx; - - /* Get 4 bytes (one ring entry) at a time */ - entry = (struct ring_entry *)((caddr_t) outring + prod_ptr); - - /* Invalidate all entries */ - entry->ring_allsc = 0; - - /* Copy in some bytes */ - for (xx = 0; (xx < 4) && (len > 0); xx++) { - entry->ring_data[xx] = *buf++; - entry->ring_sc[xx] = IOC4_TXCB_VALID; - len--; - total++; - } - - /* If we are within some small threshold of filling up the - * entire ring buffer, we must place an EXPLICIT intr here - * to generate a lowat interrupt in case we subsequently - * really do fill up the ring and the caller goes to sleep. - * No need to place more than one though. - */ - if (!(port->ip_flags & LOWAT_WRITTEN) && - ((cons_ptr - prod_ptr) & PROD_CONS_MASK) - <= port->ip_tx_lowat - * (int)sizeof(struct ring_entry)) { - port->ip_flags |= LOWAT_WRITTEN; - entry->ring_sc[0] |= IOC4_TXCB_INT_WHEN_DONE; - } - - /* Go on to next entry */ - prod_ptr += sizeof(struct ring_entry); - prod_ptr &= PROD_CONS_MASK; - } - - /* If we sent something, start DMA if necessary */ - if (total > 0 && !(port->ip_sscr & IOC4_SSCR_DMA_EN)) { - port->ip_sscr |= IOC4_SSCR_DMA_EN; - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - - /* Store the new producer pointer. If tx is disabled, we stuff the - * data into the ring buffer, but we don't actually start tx. - */ - if (!uart_tx_stopped(port->ip_port)) { - writel(prod_ptr, &port->ip_serial_regs->stpir); - - /* If we are now transmitting, enable tx_mt interrupt so we - * can disable DMA if necessary when the tx finishes. - */ - if (total > 0) - enable_intrs(port, hooks->intr_tx_mt); - } - port->ip_tx_prod = prod_ptr; - return total; -} - -/** - * disable_intrs - disable interrupts - * @port: port to enable - * @mask: mask to use - */ -static void disable_intrs(struct ioc4_port *port, uint32_t mask) -{ - struct hooks *hooks = port->ip_hooks; - - if (port->ip_ienb & mask) { - write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IEC, - IOC4_SIO_INTR_TYPE); - port->ip_ienb &= ~mask; - } - - if (!port->ip_ienb) - write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, - IOC4_W_IEC, IOC4_OTHER_INTR_TYPE); -} - -/** - * set_notification - Modify event notification - * @port: port to use - * @mask: events mask - * @set_on: set ? - */ -static int set_notification(struct ioc4_port *port, int mask, int set_on) -{ - struct hooks *hooks = port->ip_hooks; - uint32_t intrbits, sscrbits; - - BUG_ON(!mask); - - intrbits = sscrbits = 0; - - if (mask & N_DATA_READY) - intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high); - if (mask & N_OUTPUT_LOWAT) - intrbits |= hooks->intr_tx_explicit; - if (mask & N_DDCD) { - intrbits |= hooks->intr_delta_dcd; - sscrbits |= IOC4_SSCR_RX_RING_DCD; - } - if (mask & N_DCTS) - intrbits |= hooks->intr_delta_cts; - - if (set_on) { - enable_intrs(port, intrbits); - port->ip_notify |= mask; - port->ip_sscr |= sscrbits; - } else { - disable_intrs(port, intrbits); - port->ip_notify &= ~mask; - port->ip_sscr &= ~sscrbits; - } - - /* We require DMA if either DATA_READY or DDCD notification is - * currently requested. If neither of these is requested and - * there is currently no tx in progress, DMA may be disabled. - */ - if (port->ip_notify & (N_DATA_READY | N_DDCD)) - port->ip_sscr |= IOC4_SSCR_DMA_EN; - else if (!(port->ip_ienb & hooks->intr_tx_mt)) - port->ip_sscr &= ~IOC4_SSCR_DMA_EN; - - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - return 0; -} - -/** - * set_mcr - set the master control reg - * @the_port: port to use - * @mask1: mcr mask - * @mask2: shadow mask - */ -static inline int set_mcr(struct uart_port *the_port, - int mask1, int mask2) -{ - struct ioc4_port *port = get_ioc4_port(the_port, 0); - uint32_t shadow; - int spiniter = 0; - char mcr; - - if (!port) - return -1; - - /* Pause the DMA interface if necessary */ - if (port->ip_sscr & IOC4_SSCR_DMA_EN) { - writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, - &port->ip_serial_regs->sscr); - while ((readl(&port->ip_serial_regs->sscr) - & IOC4_SSCR_PAUSE_STATE) == 0) { - spiniter++; - if (spiniter > MAXITER) - return -1; - } - } - shadow = readl(&port->ip_serial_regs->shadow); - mcr = (shadow & 0xff000000) >> 24; - - /* Set new value */ - mcr |= mask1; - shadow |= mask2; - - writeb(mcr, &port->ip_uart_regs->i4u_mcr); - writel(shadow, &port->ip_serial_regs->shadow); - - /* Re-enable the DMA interface if necessary */ - if (port->ip_sscr & IOC4_SSCR_DMA_EN) { - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - return 0; -} - -/** - * ioc4_set_proto - set the protocol for the port - * @port: port to use - * @proto: protocol to use - */ -static int ioc4_set_proto(struct ioc4_port *port, int proto) -{ - struct hooks *hooks = port->ip_hooks; - - switch (proto) { - case PROTO_RS232: - /* Clear the appropriate GIO pin */ - writel(0, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw)); - break; - - case PROTO_RS422: - /* Set the appropriate GIO pin */ - writel(1, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw)); - break; - - default: - return 1; - } - return 0; -} - -/** - * transmit_chars - upper level write, called with ip_lock - * @the_port: port to write - */ -static void transmit_chars(struct uart_port *the_port) -{ - int xmit_count, tail, head; - int result; - char *start; - struct tty_struct *tty; - struct ioc4_port *port = get_ioc4_port(the_port, 0); - struct uart_state *state; - - if (!the_port) - return; - if (!port) - return; - - state = the_port->state; - tty = state->port.tty; - - if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) { - /* Nothing to do or hw stopped */ - set_notification(port, N_ALL_OUTPUT, 0); - return; - } - - head = state->xmit.head; - tail = state->xmit.tail; - start = (char *)&state->xmit.buf[tail]; - - /* write out all the data or until the end of the buffer */ - xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail); - if (xmit_count > 0) { - result = do_write(port, start, xmit_count); - if (result > 0) { - /* booking */ - xmit_count -= result; - the_port->icount.tx += result; - /* advance the pointers */ - tail += result; - tail &= UART_XMIT_SIZE - 1; - state->xmit.tail = tail; - start = (char *)&state->xmit.buf[tail]; - } - } - if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS) - uart_write_wakeup(the_port); - - if (uart_circ_empty(&state->xmit)) { - set_notification(port, N_OUTPUT_LOWAT, 0); - } else { - set_notification(port, N_OUTPUT_LOWAT, 1); - } -} - -/** - * ioc4_change_speed - change the speed of the port - * @the_port: port to change - * @new_termios: new termios settings - * @old_termios: old termios settings - */ -static void -ioc4_change_speed(struct uart_port *the_port, - struct ktermios *new_termios, struct ktermios *old_termios) -{ - struct ioc4_port *port = get_ioc4_port(the_port, 0); - int baud, bits; - unsigned cflag, iflag; - int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8; - struct uart_state *state = the_port->state; - - cflag = new_termios->c_cflag; - iflag = new_termios->c_iflag; - - switch (cflag & CSIZE) { - case CS5: - new_data = 5; - bits = 7; - break; - case CS6: - new_data = 6; - bits = 8; - break; - case CS7: - new_data = 7; - bits = 9; - break; - case CS8: - new_data = 8; - bits = 10; - break; - default: - /* cuz we always need a default ... */ - new_data = 5; - bits = 7; - break; - } - if (cflag & CSTOPB) { - bits++; - new_stop = 1; - } - if (cflag & PARENB) { - bits++; - new_parity_enable = 1; - if (cflag & PARODD) - new_parity = 1; - } - baud = uart_get_baud_rate(the_port, new_termios, old_termios, - MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED); - DPRINT_CONFIG(("%s: returned baud %d\n", __func__, baud)); - - /* default is 9600 */ - if (!baud) - baud = 9600; - - if (!the_port->fifosize) - the_port->fifosize = IOC4_FIFO_CHARS; - the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10)); - the_port->timeout += HZ / 50; /* Add .02 seconds of slop */ - - the_port->ignore_status_mask = N_ALL_INPUT; - - state->port.tty->low_latency = 1; - - if (iflag & IGNPAR) - the_port->ignore_status_mask &= ~(N_PARITY_ERROR - | N_FRAMING_ERROR); - if (iflag & IGNBRK) { - the_port->ignore_status_mask &= ~N_BREAK; - if (iflag & IGNPAR) - the_port->ignore_status_mask &= ~N_OVERRUN_ERROR; - } - if (!(cflag & CREAD)) { - /* ignore everything */ - the_port->ignore_status_mask &= ~N_DATA_READY; - } - - if (cflag & CRTSCTS) { - port->ip_sscr |= IOC4_SSCR_HFC_EN; - } - else { - port->ip_sscr &= ~IOC4_SSCR_HFC_EN; - } - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - - /* Set the configuration and proper notification call */ - DPRINT_CONFIG(("%s : port 0x%p cflag 0%o " - "config_port(baud %d data %d stop %d p enable %d parity %d)," - " notification 0x%x\n", - __func__, (void *)port, cflag, baud, new_data, new_stop, - new_parity_enable, new_parity, the_port->ignore_status_mask)); - - if ((config_port(port, baud, /* baud */ - new_data, /* byte size */ - new_stop, /* stop bits */ - new_parity_enable, /* set parity */ - new_parity)) >= 0) { /* parity 1==odd */ - set_notification(port, the_port->ignore_status_mask, 1); - } -} - -/** - * ic4_startup_local - Start up the serial port - returns >= 0 if no errors - * @the_port: Port to operate on - */ -static inline int ic4_startup_local(struct uart_port *the_port) -{ - struct ioc4_port *port; - struct uart_state *state; - - if (!the_port) - return -1; - - port = get_ioc4_port(the_port, 0); - if (!port) - return -1; - - state = the_port->state; - - local_open(port); - - /* set the protocol - mapbase has the port type */ - ioc4_set_proto(port, the_port->mapbase); - - /* set the speed of the serial port */ - ioc4_change_speed(the_port, state->port.tty->termios, - (struct ktermios *)0); - - return 0; -} - -/* - * ioc4_cb_output_lowat - called when the output low water mark is hit - * @the_port: port to output - */ -static void ioc4_cb_output_lowat(struct uart_port *the_port) -{ - unsigned long pflags; - - /* ip_lock is set on the call here */ - if (the_port) { - spin_lock_irqsave(&the_port->lock, pflags); - transmit_chars(the_port); - spin_unlock_irqrestore(&the_port->lock, pflags); - } -} - -/** - * handle_intr - service any interrupts for the given port - 2nd level - * called via sd_intr - * @arg: handler arg - * @sio_ir: ioc4regs - */ -static void handle_intr(void *arg, uint32_t sio_ir) -{ - struct ioc4_port *port = (struct ioc4_port *)arg; - struct hooks *hooks = port->ip_hooks; - unsigned int rx_high_rd_aborted = 0; - unsigned long flags; - struct uart_port *the_port; - int loop_counter; - - /* Possible race condition here: The tx_mt interrupt bit may be - * cleared without the intervention of the interrupt handler, - * e.g. by a write. If the top level interrupt handler reads a - * tx_mt, then some other processor does a write, starting up - * output, then we come in here, see the tx_mt and stop DMA, the - * output started by the other processor will hang. Thus we can - * only rely on tx_mt being legitimate if it is read while the - * port lock is held. Therefore this bit must be ignored in the - * passed in interrupt mask which was read by the top level - * interrupt handler since the port lock was not held at the time - * it was read. We can only rely on this bit being accurate if it - * is read while the port lock is held. So we'll clear it for now, - * and reload it later once we have the port lock. - */ - sio_ir &= ~(hooks->intr_tx_mt); - - spin_lock_irqsave(&port->ip_lock, flags); - - loop_counter = MAXITER; /* to avoid hangs */ - - do { - uint32_t shadow; - - if ( loop_counter-- <= 0 ) { - printk(KERN_WARNING "IOC4 serial: " - "possible hang condition/" - "port stuck on interrupt.\n"); - break; - } - - /* Handle a DCD change */ - if (sio_ir & hooks->intr_delta_dcd) { - /* ACK the interrupt */ - writel(hooks->intr_delta_dcd, - &port->ip_mem->sio_ir.raw); - - shadow = readl(&port->ip_serial_regs->shadow); - - if ((port->ip_notify & N_DDCD) - && (shadow & IOC4_SHADOW_DCD) - && (port->ip_port)) { - the_port = port->ip_port; - the_port->icount.dcd = 1; - wake_up_interruptible - (&the_port->state->port.delta_msr_wait); - } else if ((port->ip_notify & N_DDCD) - && !(shadow & IOC4_SHADOW_DCD)) { - /* Flag delta DCD/no DCD */ - port->ip_flags |= DCD_ON; - } - } - - /* Handle a CTS change */ - if (sio_ir & hooks->intr_delta_cts) { - /* ACK the interrupt */ - writel(hooks->intr_delta_cts, - &port->ip_mem->sio_ir.raw); - - shadow = readl(&port->ip_serial_regs->shadow); - - if ((port->ip_notify & N_DCTS) - && (port->ip_port)) { - the_port = port->ip_port; - the_port->icount.cts = - (shadow & IOC4_SHADOW_CTS) ? 1 : 0; - wake_up_interruptible - (&the_port->state->port.delta_msr_wait); - } - } - - /* rx timeout interrupt. Must be some data available. Put this - * before the check for rx_high since servicing this condition - * may cause that condition to clear. - */ - if (sio_ir & hooks->intr_rx_timer) { - /* ACK the interrupt */ - writel(hooks->intr_rx_timer, - &port->ip_mem->sio_ir.raw); - - if ((port->ip_notify & N_DATA_READY) - && (port->ip_port)) { - /* ip_lock is set on call here */ - receive_chars(port->ip_port); - } - } - - /* rx high interrupt. Must be after rx_timer. */ - else if (sio_ir & hooks->intr_rx_high) { - /* Data available, notify upper layer */ - if ((port->ip_notify & N_DATA_READY) - && port->ip_port) { - /* ip_lock is set on call here */ - receive_chars(port->ip_port); - } - - /* We can't ACK this interrupt. If receive_chars didn't - * cause the condition to clear, we'll have to disable - * the interrupt until the data is drained. - * If the read was aborted, don't disable the interrupt - * as this may cause us to hang indefinitely. An - * aborted read generally means that this interrupt - * hasn't been delivered to the cpu yet anyway, even - * though we see it as asserted when we read the sio_ir. - */ - if ((sio_ir = PENDING(port)) & hooks->intr_rx_high) { - if ((port->ip_flags & READ_ABORTED) == 0) { - port->ip_ienb &= ~hooks->intr_rx_high; - port->ip_flags |= INPUT_HIGH; - } else { - rx_high_rd_aborted++; - } - } - } - - /* We got a low water interrupt: notify upper layer to - * send more data. Must come before tx_mt since servicing - * this condition may cause that condition to clear. - */ - if (sio_ir & hooks->intr_tx_explicit) { - port->ip_flags &= ~LOWAT_WRITTEN; - - /* ACK the interrupt */ - writel(hooks->intr_tx_explicit, - &port->ip_mem->sio_ir.raw); - - if (port->ip_notify & N_OUTPUT_LOWAT) - ioc4_cb_output_lowat(port->ip_port); - } - - /* Handle tx_mt. Must come after tx_explicit. */ - else if (sio_ir & hooks->intr_tx_mt) { - /* If we are expecting a lowat notification - * and we get to this point it probably means that for - * some reason the tx_explicit didn't work as expected - * (that can legitimately happen if the output buffer is - * filled up in just the right way). - * So send the notification now. - */ - if (port->ip_notify & N_OUTPUT_LOWAT) { - ioc4_cb_output_lowat(port->ip_port); - - /* We need to reload the sio_ir since the lowat - * call may have caused another write to occur, - * clearing the tx_mt condition. - */ - sio_ir = PENDING(port); - } - - /* If the tx_mt condition still persists even after the - * lowat call, we've got some work to do. - */ - if (sio_ir & hooks->intr_tx_mt) { - - /* If we are not currently expecting DMA input, - * and the transmitter has just gone idle, - * there is no longer any reason for DMA, so - * disable it. - */ - if (!(port->ip_notify - & (N_DATA_READY | N_DDCD))) { - BUG_ON(!(port->ip_sscr - & IOC4_SSCR_DMA_EN)); - port->ip_sscr &= ~IOC4_SSCR_DMA_EN; - writel(port->ip_sscr, - &port->ip_serial_regs->sscr); - } - - /* Prevent infinite tx_mt interrupt */ - port->ip_ienb &= ~hooks->intr_tx_mt; - } - } - sio_ir = PENDING(port); - - /* if the read was aborted and only hooks->intr_rx_high, - * clear hooks->intr_rx_high, so we do not loop forever. - */ - - if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) { - sio_ir &= ~hooks->intr_rx_high; - } - } while (sio_ir & hooks->intr_all); - - spin_unlock_irqrestore(&port->ip_lock, flags); - - /* Re-enable interrupts before returning from interrupt handler. - * Getting interrupted here is okay. It'll just v() our semaphore, and - * we'll come through the loop again. - */ - - write_ireg(port->ip_ioc4_soft, port->ip_ienb, IOC4_W_IES, - IOC4_SIO_INTR_TYPE); -} - -/* - * ioc4_cb_post_ncs - called for some basic errors - * @port: port to use - * @ncs: event - */ -static void ioc4_cb_post_ncs(struct uart_port *the_port, int ncs) -{ - struct uart_icount *icount; - - icount = &the_port->icount; - - if (ncs & NCS_BREAK) - icount->brk++; - if (ncs & NCS_FRAMING) - icount->frame++; - if (ncs & NCS_OVERRUN) - icount->overrun++; - if (ncs & NCS_PARITY) - icount->parity++; -} - -/** - * do_read - Read in bytes from the port. Return the number of bytes - * actually read. - * @the_port: port to use - * @buf: place to put the stuff we read - * @len: how big 'buf' is - */ - -static inline int do_read(struct uart_port *the_port, unsigned char *buf, - int len) -{ - int prod_ptr, cons_ptr, total; - struct ioc4_port *port = get_ioc4_port(the_port, 0); - struct ring *inring; - struct ring_entry *entry; - struct hooks *hooks = port->ip_hooks; - int byte_num; - char *sc; - int loop_counter; - - BUG_ON(!(len >= 0)); - BUG_ON(!port); - - /* There is a nasty timing issue in the IOC4. When the rx_timer - * expires or the rx_high condition arises, we take an interrupt. - * At some point while servicing the interrupt, we read bytes from - * the ring buffer and re-arm the rx_timer. However the rx_timer is - * not started until the first byte is received *after* it is armed, - * and any bytes pending in the rx construction buffers are not drained - * to memory until either there are 4 bytes available or the rx_timer - * expires. This leads to a potential situation where data is left - * in the construction buffers forever - 1 to 3 bytes were received - * after the interrupt was generated but before the rx_timer was - * re-armed. At that point as long as no subsequent bytes are received - * the timer will never be started and the bytes will remain in the - * construction buffer forever. The solution is to execute a DRAIN - * command after rearming the timer. This way any bytes received before - * the DRAIN will be drained to memory, and any bytes received after - * the DRAIN will start the TIMER and be drained when it expires. - * Luckily, this only needs to be done when the DMA buffer is empty - * since there is no requirement that this function return all - * available data as long as it returns some. - */ - /* Re-arm the timer */ - writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir); - - prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; - cons_ptr = port->ip_rx_cons; - - if (prod_ptr == cons_ptr) { - int reset_dma = 0; - - /* Input buffer appears empty, do a flush. */ - - /* DMA must be enabled for this to work. */ - if (!(port->ip_sscr & IOC4_SSCR_DMA_EN)) { - port->ip_sscr |= IOC4_SSCR_DMA_EN; - reset_dma = 1; - } - - /* Potential race condition: we must reload the srpir after - * issuing the drain command, otherwise we could think the rx - * buffer is empty, then take a very long interrupt, and when - * we come back it's full and we wait forever for the drain to - * complete. - */ - writel(port->ip_sscr | IOC4_SSCR_RX_DRAIN, - &port->ip_serial_regs->sscr); - prod_ptr = readl(&port->ip_serial_regs->srpir) - & PROD_CONS_MASK; - - /* We must not wait for the DRAIN to complete unless there are - * at least 8 bytes (2 ring entries) available to receive the - * data otherwise the DRAIN will never complete and we'll - * deadlock here. - * In fact, to make things easier, I'll just ignore the flush if - * there is any data at all now available. - */ - if (prod_ptr == cons_ptr) { - loop_counter = 0; - while (readl(&port->ip_serial_regs->sscr) & - IOC4_SSCR_RX_DRAIN) { - loop_counter++; - if (loop_counter > MAXITER) - return -1; - } - - /* SIGH. We have to reload the prod_ptr *again* since - * the drain may have caused it to change - */ - prod_ptr = readl(&port->ip_serial_regs->srpir) - & PROD_CONS_MASK; - } - if (reset_dma) { - port->ip_sscr &= ~IOC4_SSCR_DMA_EN; - writel(port->ip_sscr, &port->ip_serial_regs->sscr); - } - } - inring = port->ip_inring; - port->ip_flags &= ~READ_ABORTED; - - total = 0; - loop_counter = 0xfffff; /* to avoid hangs */ - - /* Grab bytes from the hardware */ - while ((prod_ptr != cons_ptr) && (len > 0)) { - entry = (struct ring_entry *)((caddr_t)inring + cons_ptr); - - if ( loop_counter-- <= 0 ) { - printk(KERN_WARNING "IOC4 serial: " - "possible hang condition/" - "port stuck on read.\n"); - break; - } - - /* According to the producer pointer, this ring entry - * must contain some data. But if the PIO happened faster - * than the DMA, the data may not be available yet, so let's - * wait until it arrives. - */ - if ((entry->ring_allsc & RING_ANY_VALID) == 0) { - /* Indicate the read is aborted so we don't disable - * the interrupt thinking that the consumer is - * congested. - */ - port->ip_flags |= READ_ABORTED; - len = 0; - break; - } - - /* Load the bytes/status out of the ring entry */ - for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) { - sc = &(entry->ring_sc[byte_num]); - - /* Check for change in modem state or overrun */ - if ((*sc & IOC4_RXSB_MODEM_VALID) - && (port->ip_notify & N_DDCD)) { - /* Notify upper layer if DCD dropped */ - - if ((port->ip_flags & DCD_ON) - && !(*sc & IOC4_RXSB_DCD)) { - - /* If we have already copied some data, - * return it. We'll pick up the carrier - * drop on the next pass. That way we - * don't throw away the data that has - * already been copied back to - * the caller's buffer. - */ - if (total > 0) { - len = 0; - break; - } - port->ip_flags &= ~DCD_ON; - - /* Turn off this notification so the - * carrier drop protocol won't see it - * again when it does a read. - */ - *sc &= ~IOC4_RXSB_MODEM_VALID; - - /* To keep things consistent, we need - * to update the consumer pointer so - * the next reader won't come in and - * try to read the same ring entries - * again. This must be done here before - * the dcd change. - */ - - if ((entry->ring_allsc & RING_ANY_VALID) - == 0) { - cons_ptr += (int)sizeof - (struct ring_entry); - cons_ptr &= PROD_CONS_MASK; - } - writel(cons_ptr, - &port->ip_serial_regs->srcir); - port->ip_rx_cons = cons_ptr; - - /* Notify upper layer of carrier drop */ - if ((port->ip_notify & N_DDCD) - && port->ip_port) { - the_port->icount.dcd = 0; - wake_up_interruptible - (&the_port->state-> - port.delta_msr_wait); - } - - /* If we had any data to return, we - * would have returned it above. - */ - return 0; - } - } - if (*sc & IOC4_RXSB_MODEM_VALID) { - /* Notify that an input overrun occurred */ - if ((*sc & IOC4_RXSB_OVERRUN) - && (port->ip_notify & N_OVERRUN_ERROR)) { - ioc4_cb_post_ncs(the_port, NCS_OVERRUN); - } - /* Don't look at this byte again */ - *sc &= ~IOC4_RXSB_MODEM_VALID; - } - - /* Check for valid data or RX errors */ - if ((*sc & IOC4_RXSB_DATA_VALID) && - ((*sc & (IOC4_RXSB_PAR_ERR - | IOC4_RXSB_FRAME_ERR - | IOC4_RXSB_BREAK)) - && (port->ip_notify & (N_PARITY_ERROR - | N_FRAMING_ERROR - | N_BREAK)))) { - /* There is an error condition on the next byte. - * If we have already transferred some bytes, - * we'll stop here. Otherwise if this is the - * first byte to be read, we'll just transfer - * it alone after notifying the - * upper layer of its status. - */ - if (total > 0) { - len = 0; - break; - } else { - if ((*sc & IOC4_RXSB_PAR_ERR) && - (port->ip_notify & N_PARITY_ERROR)) { - ioc4_cb_post_ncs(the_port, - NCS_PARITY); - } - if ((*sc & IOC4_RXSB_FRAME_ERR) && - (port->ip_notify & N_FRAMING_ERROR)){ - ioc4_cb_post_ncs(the_port, - NCS_FRAMING); - } - if ((*sc & IOC4_RXSB_BREAK) - && (port->ip_notify & N_BREAK)) { - ioc4_cb_post_ncs - (the_port, - NCS_BREAK); - } - len = 1; - } - } - if (*sc & IOC4_RXSB_DATA_VALID) { - *sc &= ~IOC4_RXSB_DATA_VALID; - *buf = entry->ring_data[byte_num]; - buf++; - len--; - total++; - } - } - - /* If we used up this entry entirely, go on to the next one, - * otherwise we must have run out of buffer space, so - * leave the consumer pointer here for the next read in case - * there are still unread bytes in this entry. - */ - if ((entry->ring_allsc & RING_ANY_VALID) == 0) { - cons_ptr += (int)sizeof(struct ring_entry); - cons_ptr &= PROD_CONS_MASK; - } - } - - /* Update consumer pointer and re-arm rx timer interrupt */ - writel(cons_ptr, &port->ip_serial_regs->srcir); - port->ip_rx_cons = cons_ptr; - - /* If we have now dipped below the rx high water mark and we have - * rx_high interrupt turned off, we can now turn it back on again. - */ - if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr) - & PROD_CONS_MASK) < ((port->ip_sscr & - IOC4_SSCR_RX_THRESHOLD) - << IOC4_PROD_CONS_PTR_OFF))) { - port->ip_flags &= ~INPUT_HIGH; - enable_intrs(port, hooks->intr_rx_high); - } - return total; -} - -/** - * receive_chars - upper level read. Called with ip_lock. - * @the_port: port to read from - */ -static void receive_chars(struct uart_port *the_port) -{ - struct tty_struct *tty; - unsigned char ch[IOC4_MAX_CHARS]; - int read_count, request_count = IOC4_MAX_CHARS; - struct uart_icount *icount; - struct uart_state *state = the_port->state; - unsigned long pflags; - - /* Make sure all the pointers are "good" ones */ - if (!state) - return; - if (!state->port.tty) - return; - - spin_lock_irqsave(&the_port->lock, pflags); - tty = state->port.tty; - - request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS); - - if (request_count > 0) { - icount = &the_port->icount; - read_count = do_read(the_port, ch, request_count); - if (read_count > 0) { - tty_insert_flip_string(tty, ch, read_count); - icount->rx += read_count; - } - } - - spin_unlock_irqrestore(&the_port->lock, pflags); - - tty_flip_buffer_push(tty); -} - -/** - * ic4_type - What type of console are we? - * @port: Port to operate with (we ignore since we only have one port) - * - */ -static const char *ic4_type(struct uart_port *the_port) -{ - if (the_port->mapbase == PROTO_RS232) - return "SGI IOC4 Serial [rs232]"; - else - return "SGI IOC4 Serial [rs422]"; -} - -/** - * ic4_tx_empty - Is the transmitter empty? - * @port: Port to operate on - * - */ -static unsigned int ic4_tx_empty(struct uart_port *the_port) -{ - struct ioc4_port *port = get_ioc4_port(the_port, 0); - unsigned int ret = 0; - - if (port_is_active(port, the_port)) { - if (readl(&port->ip_serial_regs->shadow) & IOC4_SHADOW_TEMT) - ret = TIOCSER_TEMT; - } - return ret; -} - -/** - * ic4_stop_tx - stop the transmitter - * @port: Port to operate on - * - */ -static void ic4_stop_tx(struct uart_port *the_port) -{ - struct ioc4_port *port = get_ioc4_port(the_port, 0); - - if (port_is_active(port, the_port)) - set_notification(port, N_OUTPUT_LOWAT, 0); -} - -/** - * null_void_function - - * @port: Port to operate on - * - */ -static void null_void_function(struct uart_port *the_port) -{ -} - -/** - * ic4_shutdown - shut down the port - free irq and disable - * @port: Port to shut down - * - */ -static void ic4_shutdown(struct uart_port *the_port) -{ - unsigned long port_flags; - struct ioc4_port *port; - struct uart_state *state; - - port = get_ioc4_port(the_port, 0); - if (!port) - return; - - state = the_port->state; - port->ip_port = NULL; - - wake_up_interruptible(&state->port.delta_msr_wait); - - if (state->port.tty) - set_bit(TTY_IO_ERROR, &state->port.tty->flags); - - spin_lock_irqsave(&the_port->lock, port_flags); - set_notification(port, N_ALL, 0); - port->ip_flags = PORT_INACTIVE; - spin_unlock_irqrestore(&the_port->lock, port_flags); -} - -/** - * ic4_set_mctrl - set control lines (dtr, rts, etc) - * @port: Port to operate on - * @mctrl: Lines to set/unset - * - */ -static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl) -{ - unsigned char mcr = 0; - struct ioc4_port *port; - - port = get_ioc4_port(the_port, 0); - if (!port_is_active(port, the_port)) - return; - - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - set_mcr(the_port, mcr, IOC4_SHADOW_DTR); -} - -/** - * ic4_get_mctrl - get control line info - * @port: port to operate on - * - */ -static unsigned int ic4_get_mctrl(struct uart_port *the_port) -{ - struct ioc4_port *port = get_ioc4_port(the_port, 0); - uint32_t shadow; - unsigned int ret = 0; - - if (!port_is_active(port, the_port)) - return 0; - - shadow = readl(&port->ip_serial_regs->shadow); - if (shadow & IOC4_SHADOW_DCD) - ret |= TIOCM_CAR; - if (shadow & IOC4_SHADOW_DR) - ret |= TIOCM_DSR; - if (shadow & IOC4_SHADOW_CTS) - ret |= TIOCM_CTS; - return ret; -} - -/** - * ic4_start_tx - Start transmitter, flush any output - * @port: Port to operate on - * - */ -static void ic4_start_tx(struct uart_port *the_port) -{ - struct ioc4_port *port = get_ioc4_port(the_port, 0); - - if (port_is_active(port, the_port)) { - set_notification(port, N_OUTPUT_LOWAT, 1); - enable_intrs(port, port->ip_hooks->intr_tx_mt); - } -} - -/** - * ic4_break_ctl - handle breaks - * @port: Port to operate on - * @break_state: Break state - * - */ -static void ic4_break_ctl(struct uart_port *the_port, int break_state) -{ -} - -/** - * ic4_startup - Start up the serial port - * @port: Port to operate on - * - */ -static int ic4_startup(struct uart_port *the_port) -{ - int retval; - struct ioc4_port *port; - struct ioc4_control *control; - struct uart_state *state; - unsigned long port_flags; - - if (!the_port) - return -ENODEV; - port = get_ioc4_port(the_port, 1); - if (!port) - return -ENODEV; - state = the_port->state; - - control = port->ip_control; - if (!control) { - port->ip_port = NULL; - return -ENODEV; - } - - /* Start up the serial port */ - spin_lock_irqsave(&the_port->lock, port_flags); - retval = ic4_startup_local(the_port); - spin_unlock_irqrestore(&the_port->lock, port_flags); - return retval; -} - -/** - * ic4_set_termios - set termios stuff - * @port: port to operate on - * @termios: New settings - * @termios: Old - * - */ -static void -ic4_set_termios(struct uart_port *the_port, - struct ktermios *termios, struct ktermios *old_termios) -{ - unsigned long port_flags; - - spin_lock_irqsave(&the_port->lock, port_flags); - ioc4_change_speed(the_port, termios, old_termios); - spin_unlock_irqrestore(&the_port->lock, port_flags); -} - -/** - * ic4_request_port - allocate resources for port - no op.... - * @port: port to operate on - * - */ -static int ic4_request_port(struct uart_port *port) -{ - return 0; -} - -/* Associate the uart functions above - given to serial core */ - -static struct uart_ops ioc4_ops = { - .tx_empty = ic4_tx_empty, - .set_mctrl = ic4_set_mctrl, - .get_mctrl = ic4_get_mctrl, - .stop_tx = ic4_stop_tx, - .start_tx = ic4_start_tx, - .stop_rx = null_void_function, - .enable_ms = null_void_function, - .break_ctl = ic4_break_ctl, - .startup = ic4_startup, - .shutdown = ic4_shutdown, - .set_termios = ic4_set_termios, - .type = ic4_type, - .release_port = null_void_function, - .request_port = ic4_request_port, -}; - -/* - * Boot-time initialization code - */ - -static struct uart_driver ioc4_uart_rs232 = { - .owner = THIS_MODULE, - .driver_name = "ioc4_serial_rs232", - .dev_name = DEVICE_NAME_RS232, - .major = DEVICE_MAJOR, - .minor = DEVICE_MINOR_RS232, - .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS, -}; - -static struct uart_driver ioc4_uart_rs422 = { - .owner = THIS_MODULE, - .driver_name = "ioc4_serial_rs422", - .dev_name = DEVICE_NAME_RS422, - .major = DEVICE_MAJOR, - .minor = DEVICE_MINOR_RS422, - .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS, -}; - - -/** - * ioc4_serial_remove_one - detach function - * - * @idd: IOC4 master module data for this IOC4 - */ - -static int ioc4_serial_remove_one(struct ioc4_driver_data *idd) -{ - int port_num, port_type; - struct ioc4_control *control; - struct uart_port *the_port; - struct ioc4_port *port; - struct ioc4_soft *soft; - - /* If serial driver did not attach, don't try to detach */ - control = idd->idd_serial_data; - if (!control) - return 0; - - for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) { - for (port_type = UART_PORT_MIN; - port_type < UART_PORT_COUNT; - port_type++) { - the_port = &control->ic_port[port_num].icp_uart_port - [port_type]; - if (the_port) { - switch (port_type) { - case UART_PORT_RS422: - uart_remove_one_port(&ioc4_uart_rs422, - the_port); - break; - default: - case UART_PORT_RS232: - uart_remove_one_port(&ioc4_uart_rs232, - the_port); - break; - } - } - } - port = control->ic_port[port_num].icp_port; - /* we allocate in pairs */ - if (!(port_num & 1) && port) { - pci_free_consistent(port->ip_pdev, - TOTAL_RING_BUF_SIZE, - port->ip_cpu_ringbuf, - port->ip_dma_ringbuf); - kfree(port); - } - } - soft = control->ic_soft; - if (soft) { - free_irq(control->ic_irq, soft); - if (soft->is_ioc4_serial_addr) { - iounmap(soft->is_ioc4_serial_addr); - release_mem_region((unsigned long) - soft->is_ioc4_serial_addr, - sizeof(struct ioc4_serial)); - } - kfree(soft); - } - kfree(control); - idd->idd_serial_data = NULL; - - return 0; -} - - -/** - * ioc4_serial_core_attach_rs232 - register with serial core - * This is done during pci probing - * @pdev: handle for this card - */ -static inline int -ioc4_serial_core_attach(struct pci_dev *pdev, int port_type) -{ - struct ioc4_port *port; - struct uart_port *the_port; - struct ioc4_driver_data *idd = pci_get_drvdata(pdev); - struct ioc4_control *control = idd->idd_serial_data; - int port_num; - int port_type_idx; - struct uart_driver *u_driver; - - - DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n", - __func__, pdev, (void *)control)); - - if (!control) - return -ENODEV; - - port_type_idx = (port_type == PROTO_RS232) ? UART_PORT_RS232 - : UART_PORT_RS422; - - u_driver = (port_type == PROTO_RS232) ? &ioc4_uart_rs232 - : &ioc4_uart_rs422; - - /* once around for each port on this card */ - for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) { - the_port = &control->ic_port[port_num].icp_uart_port - [port_type_idx]; - port = control->ic_port[port_num].icp_port; - port->ip_all_ports[port_type_idx] = the_port; - - DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p : type %s\n", - __func__, (void *)the_port, - (void *)port, - port_type == PROTO_RS232 ? "rs232" : "rs422")); - - /* membase, iobase and mapbase just need to be non-0 */ - the_port->membase = (unsigned char __iomem *)1; - the_port->iobase = (pdev->bus->number << 16) | port_num; - the_port->line = (Num_of_ioc4_cards << 2) | port_num; - the_port->mapbase = port_type; - the_port->type = PORT_16550A; - the_port->fifosize = IOC4_FIFO_CHARS; - the_port->ops = &ioc4_ops; - the_port->irq = control->ic_irq; - the_port->dev = &pdev->dev; - spin_lock_init(&the_port->lock); - if (uart_add_one_port(u_driver, the_port) < 0) { - printk(KERN_WARNING - "%s: unable to add port %d bus %d\n", - __func__, the_port->line, pdev->bus->number); - } else { - DPRINT_CONFIG( - ("IOC4 serial port %d irq = %d, bus %d\n", - the_port->line, the_port->irq, pdev->bus->number)); - } - } - return 0; -} - -/** - * ioc4_serial_attach_one - register attach function - * called per card found from IOC4 master module. - * @idd: Master module data for this IOC4 - */ -int -ioc4_serial_attach_one(struct ioc4_driver_data *idd) -{ - unsigned long tmp_addr1; - struct ioc4_serial __iomem *serial; - struct ioc4_soft *soft; - struct ioc4_control *control; - int ret = 0; - - - DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, idd->idd_pdev, - idd->idd_pci_id)); - - /* PCI-RT does not bring out serial connections. - * Do not attach to this particular IOC4. - */ - if (idd->idd_variant == IOC4_VARIANT_PCI_RT) - return 0; - - /* request serial registers */ - tmp_addr1 = idd->idd_bar0 + IOC4_SERIAL_OFFSET; - - if (!request_mem_region(tmp_addr1, sizeof(struct ioc4_serial), - "sioc4_uart")) { - printk(KERN_WARNING - "ioc4 (%p): unable to get request region for " - "uart space\n", (void *)idd->idd_pdev); - ret = -ENODEV; - goto out1; - } - serial = ioremap(tmp_addr1, sizeof(struct ioc4_serial)); - if (!serial) { - printk(KERN_WARNING - "ioc4 (%p) : unable to remap ioc4 serial register\n", - (void *)idd->idd_pdev); - ret = -ENODEV; - goto out2; - } - DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n", - __func__, (void *)idd->idd_misc_regs, - (void *)serial)); - - /* Get memory for the new card */ - control = kzalloc(sizeof(struct ioc4_control), GFP_KERNEL); - - if (!control) { - printk(KERN_WARNING "ioc4_attach_one" - ": unable to get memory for the IOC4\n"); - ret = -ENOMEM; - goto out2; - } - idd->idd_serial_data = control; - - /* Allocate the soft structure */ - soft = kzalloc(sizeof(struct ioc4_soft), GFP_KERNEL); - if (!soft) { - printk(KERN_WARNING - "ioc4 (%p): unable to get memory for the soft struct\n", - (void *)idd->idd_pdev); - ret = -ENOMEM; - goto out3; - } - - spin_lock_init(&soft->is_ir_lock); - soft->is_ioc4_misc_addr = idd->idd_misc_regs; - soft->is_ioc4_serial_addr = serial; - - /* Init the IOC4 */ - writel(0xf << IOC4_SIO_CR_CMD_PULSE_SHIFT, - &idd->idd_misc_regs->sio_cr.raw); - - /* Enable serial port mode select generic PIO pins as outputs */ - writel(IOC4_GPCR_UART0_MODESEL | IOC4_GPCR_UART1_MODESEL - | IOC4_GPCR_UART2_MODESEL | IOC4_GPCR_UART3_MODESEL, - &idd->idd_misc_regs->gpcr_s.raw); - - /* Clear and disable all serial interrupts */ - write_ireg(soft, ~0, IOC4_W_IEC, IOC4_SIO_INTR_TYPE); - writel(~0, &idd->idd_misc_regs->sio_ir.raw); - write_ireg(soft, IOC4_OTHER_IR_SER_MEMERR, IOC4_W_IEC, - IOC4_OTHER_INTR_TYPE); - writel(IOC4_OTHER_IR_SER_MEMERR, &idd->idd_misc_regs->other_ir.raw); - control->ic_soft = soft; - - /* Hook up interrupt handler */ - if (!request_irq(idd->idd_pdev->irq, ioc4_intr, IRQF_SHARED, - "sgi-ioc4serial", soft)) { - control->ic_irq = idd->idd_pdev->irq; - } else { - printk(KERN_WARNING - "%s : request_irq fails for IRQ 0x%x\n ", - __func__, idd->idd_pdev->irq); - } - ret = ioc4_attach_local(idd); - if (ret) - goto out4; - - /* register port with the serial core - 1 rs232, 1 rs422 */ - - if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS232))) - goto out4; - - if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS422))) - goto out5; - - Num_of_ioc4_cards++; - - return ret; - - /* error exits that give back resources */ -out5: - ioc4_serial_remove_one(idd); -out4: - kfree(soft); -out3: - kfree(control); -out2: - if (serial) - iounmap(serial); - release_mem_region(tmp_addr1, sizeof(struct ioc4_serial)); -out1: - - return ret; -} - - -static struct ioc4_submodule ioc4_serial_submodule = { - .is_name = "IOC4_serial", - .is_owner = THIS_MODULE, - .is_probe = ioc4_serial_attach_one, - .is_remove = ioc4_serial_remove_one, -}; - -/** - * ioc4_serial_init - module init - */ -static int __init ioc4_serial_init(void) -{ - int ret; - - /* register with serial core */ - if ((ret = uart_register_driver(&ioc4_uart_rs232)) < 0) { - printk(KERN_WARNING - "%s: Couldn't register rs232 IOC4 serial driver\n", - __func__); - goto out; - } - if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) { - printk(KERN_WARNING - "%s: Couldn't register rs422 IOC4 serial driver\n", - __func__); - goto out_uart_rs232; - } - - /* register with IOC4 main module */ - ret = ioc4_register_submodule(&ioc4_serial_submodule); - if (ret) - goto out_uart_rs422; - return 0; - -out_uart_rs422: - uart_unregister_driver(&ioc4_uart_rs422); -out_uart_rs232: - uart_unregister_driver(&ioc4_uart_rs232); -out: - return ret; -} - -static void __exit ioc4_serial_exit(void) -{ - ioc4_unregister_submodule(&ioc4_serial_submodule); - uart_unregister_driver(&ioc4_uart_rs232); - uart_unregister_driver(&ioc4_uart_rs422); -} - -late_initcall(ioc4_serial_init); /* Call only after tty init is done */ -module_exit(ioc4_serial_exit); - -MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) "); -MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC4 Base-IO Card"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c deleted file mode 100644 index ebff4a1d4bcc..000000000000 --- a/drivers/serial/ip22zilog.c +++ /dev/null @@ -1,1221 +0,0 @@ -/* - * Driver for Zilog serial chips found on SGI workstations and - * servers. This driver could actually be made more generic. - * - * This is based on the drivers/serial/sunzilog.c code as of 2.6.0-test7 and the - * old drivers/sgi/char/sgiserial.c code which itself is based of the original - * drivers/sbus/char/zs.c code. A lot of code has been simply moved over - * directly from there but much has been rewritten. Credits therefore go out - * to David S. Miller, Eddie C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell - * for their work there. - * - * Copyright (C) 2002 Ralf Baechle (ralf@linux-mips.org) - * Copyright (C) 2002 David S. Miller (davem@redhat.com) - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_SERIAL_IP22_ZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - -#include "ip22zilog.h" - -/* - * On IP22 we need to delay after register accesses but we do not need to - * flush writes. - */ -#define ZSDELAY() udelay(5) -#define ZSDELAY_LONG() udelay(20) -#define ZS_WSYNC(channel) do { } while (0) - -#define NUM_IP22ZILOG 1 -#define NUM_CHANNELS (NUM_IP22ZILOG * 2) - -#define ZS_CLOCK 3672000 /* Zilog input clock rate. */ -#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */ - -/* - * We wrap our port structure around the generic uart_port. - */ -struct uart_ip22zilog_port { - struct uart_port port; - - /* IRQ servicing chain. */ - struct uart_ip22zilog_port *next; - - /* Current values of Zilog write registers. */ - unsigned char curregs[NUM_ZSREGS]; - - unsigned int flags; -#define IP22ZILOG_FLAG_IS_CONS 0x00000004 -#define IP22ZILOG_FLAG_IS_KGDB 0x00000008 -#define IP22ZILOG_FLAG_MODEM_STATUS 0x00000010 -#define IP22ZILOG_FLAG_IS_CHANNEL_A 0x00000020 -#define IP22ZILOG_FLAG_REGS_HELD 0x00000040 -#define IP22ZILOG_FLAG_TX_STOPPED 0x00000080 -#define IP22ZILOG_FLAG_TX_ACTIVE 0x00000100 -#define IP22ZILOG_FLAG_RESET_DONE 0x00000200 - - unsigned int tty_break; - - unsigned char parity_mask; - unsigned char prev_status; -}; - -#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel *)((PORT)->membase)) -#define UART_ZILOG(PORT) ((struct uart_ip22zilog_port *)(PORT)) -#define IP22ZILOG_GET_CURR_REG(PORT, REGNUM) \ - (UART_ZILOG(PORT)->curregs[REGNUM]) -#define IP22ZILOG_SET_CURR_REG(PORT, REGNUM, REGVAL) \ - ((UART_ZILOG(PORT)->curregs[REGNUM]) = (REGVAL)) -#define ZS_IS_CONS(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_CONS) -#define ZS_IS_KGDB(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_KGDB) -#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & IP22ZILOG_FLAG_MODEM_STATUS) -#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_CHANNEL_A) -#define ZS_REGS_HELD(UP) ((UP)->flags & IP22ZILOG_FLAG_REGS_HELD) -#define ZS_TX_STOPPED(UP) ((UP)->flags & IP22ZILOG_FLAG_TX_STOPPED) -#define ZS_TX_ACTIVE(UP) ((UP)->flags & IP22ZILOG_FLAG_TX_ACTIVE) - -/* Reading and writing Zilog8530 registers. The delays are to make this - * driver work on the IP22 which needs a settling delay after each chip - * register access, other machines handle this in hardware via auxiliary - * flip-flops which implement the settle time we do in software. - * - * The port lock must be held and local IRQs must be disabled - * when {read,write}_zsreg is invoked. - */ -static unsigned char read_zsreg(struct zilog_channel *channel, - unsigned char reg) -{ - unsigned char retval; - - writeb(reg, &channel->control); - ZSDELAY(); - retval = readb(&channel->control); - ZSDELAY(); - - return retval; -} - -static void write_zsreg(struct zilog_channel *channel, - unsigned char reg, unsigned char value) -{ - writeb(reg, &channel->control); - ZSDELAY(); - writeb(value, &channel->control); - ZSDELAY(); -} - -static void ip22zilog_clear_fifo(struct zilog_channel *channel) -{ - int i; - - for (i = 0; i < 32; i++) { - unsigned char regval; - - regval = readb(&channel->control); - ZSDELAY(); - if (regval & Rx_CH_AV) - break; - - regval = read_zsreg(channel, R1); - readb(&channel->data); - ZSDELAY(); - - if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) { - writeb(ERR_RES, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - } - } -} - -/* This function must only be called when the TX is not busy. The UART - * port lock must be held and local interrupts disabled. - */ -static void __load_zsregs(struct zilog_channel *channel, unsigned char *regs) -{ - int i; - - /* Let pending transmits finish. */ - for (i = 0; i < 1000; i++) { - unsigned char stat = read_zsreg(channel, R1); - if (stat & ALL_SNT) - break; - udelay(100); - } - - writeb(ERR_RES, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - - ip22zilog_clear_fifo(channel); - - /* Disable all interrupts. */ - write_zsreg(channel, R1, - regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); - - /* Set parity, sync config, stop bits, and clock divisor. */ - write_zsreg(channel, R4, regs[R4]); - - /* Set misc. TX/RX control bits. */ - write_zsreg(channel, R10, regs[R10]); - - /* Set TX/RX controls sans the enable bits. */ - write_zsreg(channel, R3, regs[R3] & ~RxENAB); - write_zsreg(channel, R5, regs[R5] & ~TxENAB); - - /* Synchronous mode config. */ - write_zsreg(channel, R6, regs[R6]); - write_zsreg(channel, R7, regs[R7]); - - /* Don't mess with the interrupt vector (R2, unused by us) and - * master interrupt control (R9). We make sure this is setup - * properly at probe time then never touch it again. - */ - - /* Disable baud generator. */ - write_zsreg(channel, R14, regs[R14] & ~BRENAB); - - /* Clock mode control. */ - write_zsreg(channel, R11, regs[R11]); - - /* Lower and upper byte of baud rate generator divisor. */ - write_zsreg(channel, R12, regs[R12]); - write_zsreg(channel, R13, regs[R13]); - - /* Now rewrite R14, with BRENAB (if set). */ - write_zsreg(channel, R14, regs[R14]); - - /* External status interrupt control. */ - write_zsreg(channel, R15, regs[R15]); - - /* Reset external status interrupts. */ - write_zsreg(channel, R0, RES_EXT_INT); - write_zsreg(channel, R0, RES_EXT_INT); - - /* Rewrite R3/R5, this time without enables masked. */ - write_zsreg(channel, R3, regs[R3]); - write_zsreg(channel, R5, regs[R5]); - - /* Rewrite R1, this time without IRQ enabled masked. */ - write_zsreg(channel, R1, regs[R1]); -} - -/* Reprogram the Zilog channel HW registers with the copies found in the - * software state struct. If the transmitter is busy, we defer this update - * until the next TX complete interrupt. Else, we do it right now. - * - * The UART port lock must be held and local interrupts disabled. - */ -static void ip22zilog_maybe_update_regs(struct uart_ip22zilog_port *up, - struct zilog_channel *channel) -{ - if (!ZS_REGS_HELD(up)) { - if (ZS_TX_ACTIVE(up)) { - up->flags |= IP22ZILOG_FLAG_REGS_HELD; - } else { - __load_zsregs(channel, up->curregs); - } - } -} - -#define Rx_BRK 0x0100 /* BREAK event software flag. */ -#define Rx_SYS 0x0200 /* SysRq event software flag. */ - -static struct tty_struct *ip22zilog_receive_chars(struct uart_ip22zilog_port *up, - struct zilog_channel *channel) -{ - struct tty_struct *tty; - unsigned char ch, flag; - unsigned int r1; - - tty = NULL; - if (up->port.state != NULL && - up->port.state->port.tty != NULL) - tty = up->port.state->port.tty; - - for (;;) { - ch = readb(&channel->control); - ZSDELAY(); - if (!(ch & Rx_CH_AV)) - break; - - r1 = read_zsreg(channel, R1); - if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { - writeb(ERR_RES, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - } - - ch = readb(&channel->data); - ZSDELAY(); - - ch &= up->parity_mask; - - /* Handle the null char got when BREAK is removed. */ - if (!ch) - r1 |= up->tty_break; - - /* A real serial line, record the character and status. */ - flag = TTY_NORMAL; - up->port.icount.rx++; - if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | Rx_SYS | Rx_BRK)) { - up->tty_break = 0; - - if (r1 & (Rx_SYS | Rx_BRK)) { - up->port.icount.brk++; - if (r1 & Rx_SYS) - continue; - r1 &= ~(PAR_ERR | CRC_ERR); - } - else if (r1 & PAR_ERR) - up->port.icount.parity++; - else if (r1 & CRC_ERR) - up->port.icount.frame++; - if (r1 & Rx_OVR) - up->port.icount.overrun++; - r1 &= up->port.read_status_mask; - if (r1 & Rx_BRK) - flag = TTY_BREAK; - else if (r1 & PAR_ERR) - flag = TTY_PARITY; - else if (r1 & CRC_ERR) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(&up->port, ch)) - continue; - - if (tty) - uart_insert_char(&up->port, r1, Rx_OVR, ch, flag); - } - return tty; -} - -static void ip22zilog_status_handle(struct uart_ip22zilog_port *up, - struct zilog_channel *channel) -{ - unsigned char status; - - status = readb(&channel->control); - ZSDELAY(); - - writeb(RES_EXT_INT, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - - if (up->curregs[R15] & BRKIE) { - if ((status & BRK_ABRT) && !(up->prev_status & BRK_ABRT)) { - if (uart_handle_break(&up->port)) - up->tty_break = Rx_SYS; - else - up->tty_break = Rx_BRK; - } - } - - if (ZS_WANTS_MODEM_STATUS(up)) { - if (status & SYNC) - up->port.icount.dsr++; - - /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. - * But it does not tell us which bit has changed, we have to keep - * track of this ourselves. - */ - if ((status ^ up->prev_status) ^ DCD) - uart_handle_dcd_change(&up->port, - (status & DCD)); - if ((status ^ up->prev_status) ^ CTS) - uart_handle_cts_change(&up->port, - (status & CTS)); - - wake_up_interruptible(&up->port.state->port.delta_msr_wait); - } - - up->prev_status = status; -} - -static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up, - struct zilog_channel *channel) -{ - struct circ_buf *xmit; - - if (ZS_IS_CONS(up)) { - unsigned char status = readb(&channel->control); - ZSDELAY(); - - /* TX still busy? Just wait for the next TX done interrupt. - * - * It can occur because of how we do serial console writes. It would - * be nice to transmit console writes just like we normally would for - * a TTY line. (ie. buffered and TX interrupt driven). That is not - * easy because console writes cannot sleep. One solution might be - * to poll on enough port->xmit space becomming free. -DaveM - */ - if (!(status & Tx_BUF_EMP)) - return; - } - - up->flags &= ~IP22ZILOG_FLAG_TX_ACTIVE; - - if (ZS_REGS_HELD(up)) { - __load_zsregs(channel, up->curregs); - up->flags &= ~IP22ZILOG_FLAG_REGS_HELD; - } - - if (ZS_TX_STOPPED(up)) { - up->flags &= ~IP22ZILOG_FLAG_TX_STOPPED; - goto ack_tx_int; - } - - if (up->port.x_char) { - up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; - writeb(up->port.x_char, &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); - - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - - if (up->port.state == NULL) - goto ack_tx_int; - xmit = &up->port.state->xmit; - if (uart_circ_empty(xmit)) - goto ack_tx_int; - if (uart_tx_stopped(&up->port)) - goto ack_tx_int; - - up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; - writeb(xmit->buf[xmit->tail], &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - return; - -ack_tx_int: - writeb(RES_Tx_P, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); -} - -static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id) -{ - struct uart_ip22zilog_port *up = dev_id; - - while (up) { - struct zilog_channel *channel - = ZILOG_CHANNEL_FROM_PORT(&up->port); - struct tty_struct *tty; - unsigned char r3; - - spin_lock(&up->port.lock); - r3 = read_zsreg(channel, R3); - - /* Channel A */ - tty = NULL; - if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { - writeb(RES_H_IUS, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - - if (r3 & CHARxIP) - tty = ip22zilog_receive_chars(up, channel); - if (r3 & CHAEXT) - ip22zilog_status_handle(up, channel); - if (r3 & CHATxIP) - ip22zilog_transmit_chars(up, channel); - } - spin_unlock(&up->port.lock); - - if (tty) - tty_flip_buffer_push(tty); - - /* Channel B */ - up = up->next; - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - - spin_lock(&up->port.lock); - tty = NULL; - if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { - writeb(RES_H_IUS, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - - if (r3 & CHBRxIP) - tty = ip22zilog_receive_chars(up, channel); - if (r3 & CHBEXT) - ip22zilog_status_handle(up, channel); - if (r3 & CHBTxIP) - ip22zilog_transmit_chars(up, channel); - } - spin_unlock(&up->port.lock); - - if (tty) - tty_flip_buffer_push(tty); - - up = up->next; - } - - return IRQ_HANDLED; -} - -/* A convenient way to quickly get R0 status. The caller must _not_ hold the - * port lock, it is acquired here. - */ -static __inline__ unsigned char ip22zilog_read_channel_status(struct uart_port *port) -{ - struct zilog_channel *channel; - unsigned char status; - - channel = ZILOG_CHANNEL_FROM_PORT(port); - status = readb(&channel->control); - ZSDELAY(); - - return status; -} - -/* The port lock is not held. */ -static unsigned int ip22zilog_tx_empty(struct uart_port *port) -{ - unsigned long flags; - unsigned char status; - unsigned int ret; - - spin_lock_irqsave(&port->lock, flags); - - status = ip22zilog_read_channel_status(port); - - spin_unlock_irqrestore(&port->lock, flags); - - if (status & Tx_BUF_EMP) - ret = TIOCSER_TEMT; - else - ret = 0; - - return ret; -} - -/* The port lock is held and interrupts are disabled. */ -static unsigned int ip22zilog_get_mctrl(struct uart_port *port) -{ - unsigned char status; - unsigned int ret; - - status = ip22zilog_read_channel_status(port); - - ret = 0; - if (status & DCD) - ret |= TIOCM_CAR; - if (status & SYNC) - ret |= TIOCM_DSR; - if (status & CTS) - ret |= TIOCM_CTS; - - return ret; -} - -/* The port lock is held and interrupts are disabled. */ -static void ip22zilog_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; - struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); - unsigned char set_bits, clear_bits; - - set_bits = clear_bits = 0; - - if (mctrl & TIOCM_RTS) - set_bits |= RTS; - else - clear_bits |= RTS; - if (mctrl & TIOCM_DTR) - set_bits |= DTR; - else - clear_bits |= DTR; - - /* NOTE: Not subject to 'transmitter active' rule. */ - up->curregs[R5] |= set_bits; - up->curregs[R5] &= ~clear_bits; - write_zsreg(channel, R5, up->curregs[R5]); -} - -/* The port lock is held and interrupts are disabled. */ -static void ip22zilog_stop_tx(struct uart_port *port) -{ - struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; - - up->flags |= IP22ZILOG_FLAG_TX_STOPPED; -} - -/* The port lock is held and interrupts are disabled. */ -static void ip22zilog_start_tx(struct uart_port *port) -{ - struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; - struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); - unsigned char status; - - up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; - up->flags &= ~IP22ZILOG_FLAG_TX_STOPPED; - - status = readb(&channel->control); - ZSDELAY(); - - /* TX busy? Just wait for the TX done interrupt. */ - if (!(status & Tx_BUF_EMP)) - return; - - /* Send the first character to jump-start the TX done - * IRQ sending engine. - */ - if (port->x_char) { - writeb(port->x_char, &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); - - port->icount.tx++; - port->x_char = 0; - } else { - struct circ_buf *xmit = &port->state->xmit; - - writeb(xmit->buf[xmit->tail], &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - } -} - -/* The port lock is held and interrupts are disabled. */ -static void ip22zilog_stop_rx(struct uart_port *port) -{ - struct uart_ip22zilog_port *up = UART_ZILOG(port); - struct zilog_channel *channel; - - if (ZS_IS_CONS(up)) - return; - - channel = ZILOG_CHANNEL_FROM_PORT(port); - - /* Disable all RX interrupts. */ - up->curregs[R1] &= ~RxINT_MASK; - ip22zilog_maybe_update_regs(up, channel); -} - -/* The port lock is held. */ -static void ip22zilog_enable_ms(struct uart_port *port) -{ - struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; - struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); - unsigned char new_reg; - - new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE); - if (new_reg != up->curregs[R15]) { - up->curregs[R15] = new_reg; - - /* NOTE: Not subject to 'transmitter active' rule. */ - write_zsreg(channel, R15, up->curregs[R15]); - } -} - -/* The port lock is not held. */ -static void ip22zilog_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; - struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); - unsigned char set_bits, clear_bits, new_reg; - unsigned long flags; - - set_bits = clear_bits = 0; - - if (break_state) - set_bits |= SND_BRK; - else - clear_bits |= SND_BRK; - - spin_lock_irqsave(&port->lock, flags); - - new_reg = (up->curregs[R5] | set_bits) & ~clear_bits; - if (new_reg != up->curregs[R5]) { - up->curregs[R5] = new_reg; - - /* NOTE: Not subject to 'transmitter active' rule. */ - write_zsreg(channel, R5, up->curregs[R5]); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void __ip22zilog_reset(struct uart_ip22zilog_port *up) -{ - struct zilog_channel *channel; - int i; - - if (up->flags & IP22ZILOG_FLAG_RESET_DONE) - return; - - /* Let pending transmits finish. */ - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - for (i = 0; i < 1000; i++) { - unsigned char stat = read_zsreg(channel, R1); - if (stat & ALL_SNT) - break; - udelay(100); - } - - if (!ZS_IS_CHANNEL_A(up)) { - up++; - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - } - write_zsreg(channel, R9, FHWRES); - ZSDELAY_LONG(); - (void) read_zsreg(channel, R0); - - up->flags |= IP22ZILOG_FLAG_RESET_DONE; - up->next->flags |= IP22ZILOG_FLAG_RESET_DONE; -} - -static void __ip22zilog_startup(struct uart_ip22zilog_port *up) -{ - struct zilog_channel *channel; - - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - - __ip22zilog_reset(up); - - __load_zsregs(channel, up->curregs); - /* set master interrupt enable */ - write_zsreg(channel, R9, up->curregs[R9]); - up->prev_status = readb(&channel->control); - - /* Enable receiver and transmitter. */ - up->curregs[R3] |= RxENAB; - up->curregs[R5] |= TxENAB; - - up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; - ip22zilog_maybe_update_regs(up, channel); -} - -static int ip22zilog_startup(struct uart_port *port) -{ - struct uart_ip22zilog_port *up = UART_ZILOG(port); - unsigned long flags; - - if (ZS_IS_CONS(up)) - return 0; - - spin_lock_irqsave(&port->lock, flags); - __ip22zilog_startup(up); - spin_unlock_irqrestore(&port->lock, flags); - return 0; -} - -/* - * The test for ZS_IS_CONS is explained by the following e-mail: - ***** - * From: Russell King - * Date: Sun, 8 Dec 2002 10:18:38 +0000 - * - * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote: - * > I boot my 2.5 boxes using "console=ttyS0,9600" argument, - * > and I noticed that something is not right with reference - * > counting in this case. It seems that when the console - * > is open by kernel initially, this is not accounted - * > as an open, and uart_startup is not called. - * - * That is correct. We are unable to call uart_startup when the serial - * console is initialised because it may need to allocate memory (as - * request_irq does) and the memory allocators may not have been - * initialised. - * - * 1. initialise the port into a state where it can send characters in the - * console write method. - * - * 2. don't do the actual hardware shutdown in your shutdown() method (but - * do the normal software shutdown - ie, free irqs etc) - ***** - */ -static void ip22zilog_shutdown(struct uart_port *port) -{ - struct uart_ip22zilog_port *up = UART_ZILOG(port); - struct zilog_channel *channel; - unsigned long flags; - - if (ZS_IS_CONS(up)) - return; - - spin_lock_irqsave(&port->lock, flags); - - channel = ZILOG_CHANNEL_FROM_PORT(port); - - /* Disable receiver and transmitter. */ - up->curregs[R3] &= ~RxENAB; - up->curregs[R5] &= ~TxENAB; - - /* Disable all interrupts and BRK assertion. */ - up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); - up->curregs[R5] &= ~SND_BRK; - ip22zilog_maybe_update_regs(up, channel); - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* Shared by TTY driver and serial console setup. The port lock is held - * and local interrupts are disabled. - */ -static void -ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag, - unsigned int iflag, int brg) -{ - - up->curregs[R10] = NRZ; - up->curregs[R11] = TCBR | RCBR; - - /* Program BAUD and clock source. */ - up->curregs[R4] &= ~XCLK_MASK; - up->curregs[R4] |= X16CLK; - up->curregs[R12] = brg & 0xff; - up->curregs[R13] = (brg >> 8) & 0xff; - up->curregs[R14] = BRENAB; - - /* Character size, stop bits, and parity. */ - up->curregs[3] &= ~RxN_MASK; - up->curregs[5] &= ~TxN_MASK; - switch (cflag & CSIZE) { - case CS5: - up->curregs[3] |= Rx5; - up->curregs[5] |= Tx5; - up->parity_mask = 0x1f; - break; - case CS6: - up->curregs[3] |= Rx6; - up->curregs[5] |= Tx6; - up->parity_mask = 0x3f; - break; - case CS7: - up->curregs[3] |= Rx7; - up->curregs[5] |= Tx7; - up->parity_mask = 0x7f; - break; - case CS8: - default: - up->curregs[3] |= Rx8; - up->curregs[5] |= Tx8; - up->parity_mask = 0xff; - break; - }; - up->curregs[4] &= ~0x0c; - if (cflag & CSTOPB) - up->curregs[4] |= SB2; - else - up->curregs[4] |= SB1; - if (cflag & PARENB) - up->curregs[4] |= PAR_ENAB; - else - up->curregs[4] &= ~PAR_ENAB; - if (!(cflag & PARODD)) - up->curregs[4] |= PAR_EVEN; - else - up->curregs[4] &= ~PAR_EVEN; - - up->port.read_status_mask = Rx_OVR; - if (iflag & INPCK) - up->port.read_status_mask |= CRC_ERR | PAR_ERR; - if (iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= BRK_ABRT; - - up->port.ignore_status_mask = 0; - if (iflag & IGNPAR) - up->port.ignore_status_mask |= CRC_ERR | PAR_ERR; - if (iflag & IGNBRK) { - up->port.ignore_status_mask |= BRK_ABRT; - if (iflag & IGNPAR) - up->port.ignore_status_mask |= Rx_OVR; - } - - if ((cflag & CREAD) == 0) - up->port.ignore_status_mask = 0xff; -} - -/* The port lock is not held. */ -static void -ip22zilog_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; - unsigned long flags; - int baud, brg; - - baud = uart_get_baud_rate(port, termios, old, 1200, 76800); - - spin_lock_irqsave(&up->port.lock, flags); - - brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); - - ip22zilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg); - - if (UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->flags |= IP22ZILOG_FLAG_MODEM_STATUS; - else - up->flags &= ~IP22ZILOG_FLAG_MODEM_STATUS; - - ip22zilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port)); - uart_update_timeout(port, termios->c_cflag, baud); - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static const char *ip22zilog_type(struct uart_port *port) -{ - return "IP22-Zilog"; -} - -/* We do not request/release mappings of the registers here, this - * happens at early serial probe time. - */ -static void ip22zilog_release_port(struct uart_port *port) -{ -} - -static int ip22zilog_request_port(struct uart_port *port) -{ - return 0; -} - -/* These do not need to do anything interesting either. */ -static void ip22zilog_config_port(struct uart_port *port, int flags) -{ -} - -/* We do not support letting the user mess with the divisor, IRQ, etc. */ -static int ip22zilog_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return -EINVAL; -} - -static struct uart_ops ip22zilog_pops = { - .tx_empty = ip22zilog_tx_empty, - .set_mctrl = ip22zilog_set_mctrl, - .get_mctrl = ip22zilog_get_mctrl, - .stop_tx = ip22zilog_stop_tx, - .start_tx = ip22zilog_start_tx, - .stop_rx = ip22zilog_stop_rx, - .enable_ms = ip22zilog_enable_ms, - .break_ctl = ip22zilog_break_ctl, - .startup = ip22zilog_startup, - .shutdown = ip22zilog_shutdown, - .set_termios = ip22zilog_set_termios, - .type = ip22zilog_type, - .release_port = ip22zilog_release_port, - .request_port = ip22zilog_request_port, - .config_port = ip22zilog_config_port, - .verify_port = ip22zilog_verify_port, -}; - -static struct uart_ip22zilog_port *ip22zilog_port_table; -static struct zilog_layout **ip22zilog_chip_regs; - -static struct uart_ip22zilog_port *ip22zilog_irq_chain; -static int zilog_irq = -1; - -static void * __init alloc_one_table(unsigned long size) -{ - return kzalloc(size, GFP_KERNEL); -} - -static void __init ip22zilog_alloc_tables(void) -{ - ip22zilog_port_table = (struct uart_ip22zilog_port *) - alloc_one_table(NUM_CHANNELS * sizeof(struct uart_ip22zilog_port)); - ip22zilog_chip_regs = (struct zilog_layout **) - alloc_one_table(NUM_IP22ZILOG * sizeof(struct zilog_layout *)); - - if (ip22zilog_port_table == NULL || ip22zilog_chip_regs == NULL) { - panic("IP22-Zilog: Cannot allocate IP22-Zilog tables."); - } -} - -/* Get the address of the registers for IP22-Zilog instance CHIP. */ -static struct zilog_layout * __init get_zs(int chip) -{ - unsigned long base; - - if (chip < 0 || chip >= NUM_IP22ZILOG) { - panic("IP22-Zilog: Illegal chip number %d in get_zs.", chip); - } - - /* Not probe-able, hard code it. */ - base = (unsigned long) &sgioc->uart; - - zilog_irq = SGI_SERIAL_IRQ; - request_mem_region(base, 8, "IP22-Zilog"); - - return (struct zilog_layout *) base; -} - -#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ - -#ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE -static void ip22zilog_put_char(struct uart_port *port, int ch) -{ - struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); - int loops = ZS_PUT_CHAR_MAX_DELAY; - - /* This is a timed polling loop so do not switch the explicit - * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM - */ - do { - unsigned char val = readb(&channel->control); - if (val & Tx_BUF_EMP) { - ZSDELAY(); - break; - } - udelay(5); - } while (--loops); - - writeb(ch, &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); -} - -static void -ip22zilog_console_write(struct console *con, const char *s, unsigned int count) -{ - struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index]; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - uart_console_write(&up->port, s, count, ip22zilog_put_char); - udelay(2); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static int __init ip22zilog_console_setup(struct console *con, char *options) -{ - struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index]; - unsigned long flags; - int baud = 9600, bits = 8; - int parity = 'n'; - int flow = 'n'; - - up->flags |= IP22ZILOG_FLAG_IS_CONS; - - printk(KERN_INFO "Console: ttyS%d (IP22-Zilog)\n", con->index); - - spin_lock_irqsave(&up->port.lock, flags); - - up->curregs[R15] |= BRKIE; - - __ip22zilog_startup(up); - - spin_unlock_irqrestore(&up->port.lock, flags); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - return uart_set_options(&up->port, con, baud, parity, bits, flow); -} - -static struct uart_driver ip22zilog_reg; - -static struct console ip22zilog_console = { - .name = "ttyS", - .write = ip22zilog_console_write, - .device = uart_console_device, - .setup = ip22zilog_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &ip22zilog_reg, -}; -#endif /* CONFIG_SERIAL_IP22_ZILOG_CONSOLE */ - -static struct uart_driver ip22zilog_reg = { - .owner = THIS_MODULE, - .driver_name = "serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = NUM_CHANNELS, -#ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE - .cons = &ip22zilog_console, -#endif -}; - -static void __init ip22zilog_prepare(void) -{ - struct uart_ip22zilog_port *up; - struct zilog_layout *rp; - int channel, chip; - - /* - * Temporary fix. - */ - for (channel = 0; channel < NUM_CHANNELS; channel++) - spin_lock_init(&ip22zilog_port_table[channel].port.lock); - - ip22zilog_irq_chain = &ip22zilog_port_table[NUM_CHANNELS - 1]; - up = &ip22zilog_port_table[0]; - for (channel = NUM_CHANNELS - 1 ; channel > 0; channel--) - up[channel].next = &up[channel - 1]; - up[channel].next = NULL; - - for (chip = 0; chip < NUM_IP22ZILOG; chip++) { - if (!ip22zilog_chip_regs[chip]) { - ip22zilog_chip_regs[chip] = rp = get_zs(chip); - - up[(chip * 2) + 0].port.membase = (char *) &rp->channelB; - up[(chip * 2) + 1].port.membase = (char *) &rp->channelA; - - /* In theory mapbase is the physical address ... */ - up[(chip * 2) + 0].port.mapbase = - (unsigned long) ioremap((unsigned long) &rp->channelB, 8); - up[(chip * 2) + 1].port.mapbase = - (unsigned long) ioremap((unsigned long) &rp->channelA, 8); - } - - /* Channel A */ - up[(chip * 2) + 0].port.iotype = UPIO_MEM; - up[(chip * 2) + 0].port.irq = zilog_irq; - up[(chip * 2) + 0].port.uartclk = ZS_CLOCK; - up[(chip * 2) + 0].port.fifosize = 1; - up[(chip * 2) + 0].port.ops = &ip22zilog_pops; - up[(chip * 2) + 0].port.type = PORT_IP22ZILOG; - up[(chip * 2) + 0].port.flags = 0; - up[(chip * 2) + 0].port.line = (chip * 2) + 0; - up[(chip * 2) + 0].flags = 0; - - /* Channel B */ - up[(chip * 2) + 1].port.iotype = UPIO_MEM; - up[(chip * 2) + 1].port.irq = zilog_irq; - up[(chip * 2) + 1].port.uartclk = ZS_CLOCK; - up[(chip * 2) + 1].port.fifosize = 1; - up[(chip * 2) + 1].port.ops = &ip22zilog_pops; - up[(chip * 2) + 1].port.type = PORT_IP22ZILOG; - up[(chip * 2) + 1].port.line = (chip * 2) + 1; - up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A; - } - - for (channel = 0; channel < NUM_CHANNELS; channel++) { - struct uart_ip22zilog_port *up = &ip22zilog_port_table[channel]; - int brg; - - /* Normal serial TTY. */ - up->parity_mask = 0xff; - up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; - up->curregs[R4] = PAR_EVEN | X16CLK | SB1; - up->curregs[R3] = RxENAB | Rx8; - up->curregs[R5] = TxENAB | Tx8; - up->curregs[R9] = NV | MIE; - up->curregs[R10] = NRZ; - up->curregs[R11] = TCBR | RCBR; - brg = BPS_TO_BRG(9600, ZS_CLOCK / ZS_CLOCK_DIVISOR); - up->curregs[R12] = (brg & 0xff); - up->curregs[R13] = (brg >> 8) & 0xff; - up->curregs[R14] = BRENAB; - } -} - -static int __init ip22zilog_ports_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: IP22 Zilog driver (%d chips).\n", NUM_IP22ZILOG); - - ip22zilog_prepare(); - - if (request_irq(zilog_irq, ip22zilog_interrupt, 0, - "IP22-Zilog", ip22zilog_irq_chain)) { - panic("IP22-Zilog: Unable to register zs interrupt handler.\n"); - } - - ret = uart_register_driver(&ip22zilog_reg); - if (ret == 0) { - int i; - - for (i = 0; i < NUM_CHANNELS; i++) { - struct uart_ip22zilog_port *up = &ip22zilog_port_table[i]; - - uart_add_one_port(&ip22zilog_reg, &up->port); - } - } - - return ret; -} - -static int __init ip22zilog_init(void) -{ - /* IP22 Zilog setup is hard coded, no probing to do. */ - ip22zilog_alloc_tables(); - ip22zilog_ports_init(); - - return 0; -} - -static void __exit ip22zilog_exit(void) -{ - int i; - struct uart_ip22zilog_port *up; - - for (i = 0; i < NUM_CHANNELS; i++) { - up = &ip22zilog_port_table[i]; - - uart_remove_one_port(&ip22zilog_reg, &up->port); - } - - /* Free IO mem */ - up = &ip22zilog_port_table[0]; - for (i = 0; i < NUM_IP22ZILOG; i++) { - if (up[(i * 2) + 0].port.mapbase) { - iounmap((void*)up[(i * 2) + 0].port.mapbase); - up[(i * 2) + 0].port.mapbase = 0; - } - if (up[(i * 2) + 1].port.mapbase) { - iounmap((void*)up[(i * 2) + 1].port.mapbase); - up[(i * 2) + 1].port.mapbase = 0; - } - } - - uart_unregister_driver(&ip22zilog_reg); -} - -module_init(ip22zilog_init); -module_exit(ip22zilog_exit); - -/* David wrote it but I'm to blame for the bugs ... */ -MODULE_AUTHOR("Ralf Baechle "); -MODULE_DESCRIPTION("SGI Zilog serial port driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/ip22zilog.h b/drivers/serial/ip22zilog.h deleted file mode 100644 index a59a9a8341d2..000000000000 --- a/drivers/serial/ip22zilog.h +++ /dev/null @@ -1,281 +0,0 @@ -#ifndef _IP22_ZILOG_H -#define _IP22_ZILOG_H - -#include - -struct zilog_channel { -#ifdef __BIG_ENDIAN - volatile unsigned char unused0[3]; - volatile unsigned char control; - volatile unsigned char unused1[3]; - volatile unsigned char data; -#else /* __LITTLE_ENDIAN */ - volatile unsigned char control; - volatile unsigned char unused0[3]; - volatile unsigned char data; - volatile unsigned char unused1[3]; -#endif -}; - -struct zilog_layout { - struct zilog_channel channelB; - struct zilog_channel channelA; -}; - -#define NUM_ZSREGS 16 - -/* Conversion routines to/from brg time constants from/to bits - * per second. - */ -#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) -#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) - -/* The Zilog register set */ - -#define FLAG 0x7e - -/* Write Register 0 */ -#define R0 0 /* Register selects */ -#define R1 1 -#define R2 2 -#define R3 3 -#define R4 4 -#define R5 5 -#define R6 6 -#define R7 7 -#define R8 8 -#define R9 9 -#define R10 10 -#define R11 11 -#define R12 12 -#define R13 13 -#define R14 14 -#define R15 15 - -#define NULLCODE 0 /* Null Code */ -#define POINT_HIGH 0x8 /* Select upper half of registers */ -#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ -#define SEND_ABORT 0x18 /* HDLC Abort */ -#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ -#define RES_Tx_P 0x28 /* Reset TxINT Pending */ -#define ERR_RES 0x30 /* Error Reset */ -#define RES_H_IUS 0x38 /* Reset highest IUS */ - -#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ -#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ -#define RES_EOM_L 0xC0 /* Reset EOM latch */ - -/* Write Register 1 */ - -#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ -#define TxINT_ENAB 0x2 /* Tx Int Enable */ -#define PAR_SPEC 0x4 /* Parity is special condition */ - -#define RxINT_DISAB 0 /* Rx Int Disable */ -#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ -#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ -#define INT_ERR_Rx 0x18 /* Int on error only */ -#define RxINT_MASK 0x18 - -#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ -#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ -#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ - -/* Write Register #2 (Interrupt Vector) */ - -/* Write Register 3 */ - -#define RxENAB 0x1 /* Rx Enable */ -#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ -#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ -#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ -#define ENT_HM 0x10 /* Enter Hunt Mode */ -#define AUTO_ENAB 0x20 /* Auto Enables */ -#define Rx5 0x0 /* Rx 5 Bits/Character */ -#define Rx7 0x40 /* Rx 7 Bits/Character */ -#define Rx6 0x80 /* Rx 6 Bits/Character */ -#define Rx8 0xc0 /* Rx 8 Bits/Character */ -#define RxN_MASK 0xc0 - -/* Write Register 4 */ - -#define PAR_ENAB 0x1 /* Parity Enable */ -#define PAR_EVEN 0x2 /* Parity Even/Odd* */ - -#define SYNC_ENAB 0 /* Sync Modes Enable */ -#define SB1 0x4 /* 1 stop bit/char */ -#define SB15 0x8 /* 1.5 stop bits/char */ -#define SB2 0xc /* 2 stop bits/char */ - -#define MONSYNC 0 /* 8 Bit Sync character */ -#define BISYNC 0x10 /* 16 bit sync character */ -#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ -#define EXTSYNC 0x30 /* External Sync Mode */ - -#define X1CLK 0x0 /* x1 clock mode */ -#define X16CLK 0x40 /* x16 clock mode */ -#define X32CLK 0x80 /* x32 clock mode */ -#define X64CLK 0xC0 /* x64 clock mode */ -#define XCLK_MASK 0xC0 - -/* Write Register 5 */ - -#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ -#define RTS 0x2 /* RTS */ -#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ -#define TxENAB 0x8 /* Tx Enable */ -#define SND_BRK 0x10 /* Send Break */ -#define Tx5 0x0 /* Tx 5 bits (or less)/character */ -#define Tx7 0x20 /* Tx 7 bits/character */ -#define Tx6 0x40 /* Tx 6 bits/character */ -#define Tx8 0x60 /* Tx 8 bits/character */ -#define TxN_MASK 0x60 -#define DTR 0x80 /* DTR */ - -/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ - -/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ - -/* Write Register 8 (transmit buffer) */ - -/* Write Register 9 (Master interrupt control) */ -#define VIS 1 /* Vector Includes Status */ -#define NV 2 /* No Vector */ -#define DLC 4 /* Disable Lower Chain */ -#define MIE 8 /* Master Interrupt Enable */ -#define STATHI 0x10 /* Status high */ -#define NORESET 0 /* No reset on write to R9 */ -#define CHRB 0x40 /* Reset channel B */ -#define CHRA 0x80 /* Reset channel A */ -#define FHWRES 0xc0 /* Force hardware reset */ - -/* Write Register 10 (misc control bits) */ -#define BIT6 1 /* 6 bit/8bit sync */ -#define LOOPMODE 2 /* SDLC Loop mode */ -#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ -#define MARKIDLE 8 /* Mark/flag on idle */ -#define GAOP 0x10 /* Go active on poll */ -#define NRZ 0 /* NRZ mode */ -#define NRZI 0x20 /* NRZI mode */ -#define FM1 0x40 /* FM1 (transition = 1) */ -#define FM0 0x60 /* FM0 (transition = 0) */ -#define CRCPS 0x80 /* CRC Preset I/O */ - -/* Write Register 11 (Clock Mode control) */ -#define TRxCXT 0 /* TRxC = Xtal output */ -#define TRxCTC 1 /* TRxC = Transmit clock */ -#define TRxCBR 2 /* TRxC = BR Generator Output */ -#define TRxCDP 3 /* TRxC = DPLL output */ -#define TRxCOI 4 /* TRxC O/I */ -#define TCRTxCP 0 /* Transmit clock = RTxC pin */ -#define TCTRxCP 8 /* Transmit clock = TRxC pin */ -#define TCBR 0x10 /* Transmit clock = BR Generator output */ -#define TCDPLL 0x18 /* Transmit clock = DPLL output */ -#define RCRTxCP 0 /* Receive clock = RTxC pin */ -#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ -#define RCBR 0x40 /* Receive clock = BR Generator output */ -#define RCDPLL 0x60 /* Receive clock = DPLL output */ -#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ - -/* Write Register 12 (lower byte of baud rate generator time constant) */ - -/* Write Register 13 (upper byte of baud rate generator time constant) */ - -/* Write Register 14 (Misc control bits) */ -#define BRENAB 1 /* Baud rate generator enable */ -#define BRSRC 2 /* Baud rate generator source */ -#define DTRREQ 4 /* DTR/Request function */ -#define AUTOECHO 8 /* Auto Echo */ -#define LOOPBAK 0x10 /* Local loopback */ -#define SEARCH 0x20 /* Enter search mode */ -#define RMC 0x40 /* Reset missing clock */ -#define DISDPLL 0x60 /* Disable DPLL */ -#define SSBR 0x80 /* Set DPLL source = BR generator */ -#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ -#define SFMM 0xc0 /* Set FM mode */ -#define SNRZI 0xe0 /* Set NRZI mode */ - -/* Write Register 15 (external/status interrupt control) */ -#define ZCIE 2 /* Zero count IE */ -#define DCDIE 8 /* DCD IE */ -#define SYNCIE 0x10 /* Sync/hunt IE */ -#define CTSIE 0x20 /* CTS IE */ -#define TxUIE 0x40 /* Tx Underrun/EOM IE */ -#define BRKIE 0x80 /* Break/Abort IE */ - - -/* Read Register 0 */ -#define Rx_CH_AV 0x1 /* Rx Character Available */ -#define ZCOUNT 0x2 /* Zero count */ -#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ -#define DCD 0x8 /* DCD */ -#define SYNC 0x10 /* Sync/hunt */ -#define CTS 0x20 /* CTS */ -#define TxEOM 0x40 /* Tx underrun */ -#define BRK_ABRT 0x80 /* Break/Abort */ - -/* Read Register 1 */ -#define ALL_SNT 0x1 /* All sent */ -/* Residue Data for 8 Rx bits/char programmed */ -#define RES3 0x8 /* 0/3 */ -#define RES4 0x4 /* 0/4 */ -#define RES5 0xc /* 0/5 */ -#define RES6 0x2 /* 0/6 */ -#define RES7 0xa /* 0/7 */ -#define RES8 0x6 /* 0/8 */ -#define RES18 0xe /* 1/8 */ -#define RES28 0x0 /* 2/8 */ -/* Special Rx Condition Interrupts */ -#define PAR_ERR 0x10 /* Parity error */ -#define Rx_OVR 0x20 /* Rx Overrun Error */ -#define CRC_ERR 0x40 /* CRC/Framing Error */ -#define END_FR 0x80 /* End of Frame (SDLC) */ - -/* Read Register 2 (channel b only) - Interrupt vector */ -#define CHB_Tx_EMPTY 0x00 -#define CHB_EXT_STAT 0x02 -#define CHB_Rx_AVAIL 0x04 -#define CHB_SPECIAL 0x06 -#define CHA_Tx_EMPTY 0x08 -#define CHA_EXT_STAT 0x0a -#define CHA_Rx_AVAIL 0x0c -#define CHA_SPECIAL 0x0e -#define STATUS_MASK 0x0e - -/* Read Register 3 (interrupt pending register) ch a only */ -#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ -#define CHBTxIP 0x2 /* Channel B Tx IP */ -#define CHBRxIP 0x4 /* Channel B Rx IP */ -#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ -#define CHATxIP 0x10 /* Channel A Tx IP */ -#define CHARxIP 0x20 /* Channel A Rx IP */ - -/* Read Register 8 (receive data register) */ - -/* Read Register 10 (misc status bits) */ -#define ONLOOP 2 /* On loop */ -#define LOOPSEND 0x10 /* Loop sending */ -#define CLK2MIS 0x40 /* Two clocks missing */ -#define CLK1MIS 0x80 /* One clock missing */ - -/* Read Register 12 (lower byte of baud rate generator constant) */ - -/* Read Register 13 (upper byte of baud rate generator constant) */ - -/* Read Register 15 (value of WR 15) */ - -/* Misc macros */ -#define ZS_CLEARERR(channel) do { writeb(ERR_RES, &channel->control); \ - udelay(5); } while(0) - -#define ZS_CLEARSTAT(channel) do { writeb(RES_EXT_INT, &channel->control); \ - udelay(5); } while(0) - -#define ZS_CLEARFIFO(channel) do { readb(&channel->data); \ - udelay(2); \ - readb(&channel->data); \ - udelay(2); \ - readb(&channel->data); \ - udelay(2); } while(0) - -#endif /* _IP22_ZILOG_H */ diff --git a/drivers/serial/jsm/Makefile b/drivers/serial/jsm/Makefile deleted file mode 100644 index e46b6e0f8b18..000000000000 --- a/drivers/serial/jsm/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for Jasmine adapter -# - -obj-$(CONFIG_SERIAL_JSM) += jsm.o - -jsm-objs := jsm_driver.o jsm_neo.o jsm_tty.o - diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h deleted file mode 100644 index 38a509c684cd..000000000000 --- a/drivers/serial/jsm/jsm.h +++ /dev/null @@ -1,388 +0,0 @@ -/************************************************************************ - * Copyright 2003 Digi International (www.digi.com) - * - * Copyright (C) 2004 IBM Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, - * MA 02111-1307, USA. - * - * Contact Information: - * Scott H Kilau - * Wendy Xiong - * - ***********************************************************************/ - -#ifndef __JSM_DRIVER_H -#define __JSM_DRIVER_H - -#include -#include /* To pick up the varions Linux types */ -#include -#include -#include - -/* - * Debugging levels can be set using debug insmod variable - * They can also be compiled out completely. - */ -enum { - DBG_INIT = 0x01, - DBG_BASIC = 0x02, - DBG_CORE = 0x04, - DBG_OPEN = 0x08, - DBG_CLOSE = 0x10, - DBG_READ = 0x20, - DBG_WRITE = 0x40, - DBG_IOCTL = 0x80, - DBG_PROC = 0x100, - DBG_PARAM = 0x200, - DBG_PSCAN = 0x400, - DBG_EVENT = 0x800, - DBG_DRAIN = 0x1000, - DBG_MSIGS = 0x2000, - DBG_MGMT = 0x4000, - DBG_INTR = 0x8000, - DBG_CARR = 0x10000, -}; - -#define jsm_printk(nlevel, klevel, pdev, fmt, args...) \ - if ((DBG_##nlevel & jsm_debug)) \ - dev_printk(KERN_##klevel, pdev->dev, fmt, ## args) - -#define MAXLINES 256 -#define MAXPORTS 8 -#define MAX_STOPS_SENT 5 - -/* Board type definitions */ - -#define T_NEO 0000 -#define T_CLASSIC 0001 -#define T_PCIBUS 0400 - -/* Board State Definitions */ - -#define BD_RUNNING 0x0 -#define BD_REASON 0x7f -#define BD_NOTFOUND 0x1 -#define BD_NOIOPORT 0x2 -#define BD_NOMEM 0x3 -#define BD_NOBIOS 0x4 -#define BD_NOFEP 0x5 -#define BD_FAILED 0x6 -#define BD_ALLOCATED 0x7 -#define BD_TRIBOOT 0x8 -#define BD_BADKME 0x80 - - -/* 4 extra for alignment play space */ -#define WRITEBUFLEN ((4096) + 4) -#define MYFLIPLEN N_TTY_BUF_SIZE - -#define JSM_VERSION "jsm: 1.2-1-INKERNEL" -#define JSM_PARTNUM "40002438_A-INKERNEL" - -struct jsm_board; -struct jsm_channel; - -/************************************************************************ - * Per board operations structure * - ************************************************************************/ -struct board_ops { - irq_handler_t intr; - void (*uart_init) (struct jsm_channel *ch); - void (*uart_off) (struct jsm_channel *ch); - void (*param) (struct jsm_channel *ch); - void (*assert_modem_signals) (struct jsm_channel *ch); - void (*flush_uart_write) (struct jsm_channel *ch); - void (*flush_uart_read) (struct jsm_channel *ch); - void (*disable_receiver) (struct jsm_channel *ch); - void (*enable_receiver) (struct jsm_channel *ch); - void (*send_break) (struct jsm_channel *ch); - void (*clear_break) (struct jsm_channel *ch, int); - void (*send_start_character) (struct jsm_channel *ch); - void (*send_stop_character) (struct jsm_channel *ch); - void (*copy_data_from_queue_to_uart) (struct jsm_channel *ch); - u32 (*get_uart_bytes_left) (struct jsm_channel *ch); - void (*send_immediate_char) (struct jsm_channel *ch, unsigned char); -}; - - -/* - * Per-board information - */ -struct jsm_board -{ - int boardnum; /* Board number: 0-32 */ - - int type; /* Type of board */ - u8 rev; /* PCI revision ID */ - struct pci_dev *pci_dev; - u32 maxports; /* MAX ports this board can handle */ - - spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and - * the interrupt routine from each other. - */ - - u32 nasync; /* Number of ports on card */ - - u32 irq; /* Interrupt request number */ - - u64 membase; /* Start of base memory of the card */ - u64 membase_end; /* End of base memory of the card */ - - u8 __iomem *re_map_membase;/* Remapped memory of the card */ - - u64 iobase; /* Start of io base of the card */ - u64 iobase_end; /* End of io base of the card */ - - u32 bd_uart_offset; /* Space between each UART */ - - struct jsm_channel *channels[MAXPORTS]; /* array of pointers to our channels. */ - char *flipbuf; /* Our flip buffer, alloced if board is found */ - - u32 bd_dividend; /* Board/UARTs specific dividend */ - - struct board_ops *bd_ops; - - struct list_head jsm_board_entry; -}; - -/************************************************************************ - * Device flag definitions for ch_flags. - ************************************************************************/ -#define CH_PRON 0x0001 /* Printer on string */ -#define CH_STOP 0x0002 /* Output is stopped */ -#define CH_STOPI 0x0004 /* Input is stopped */ -#define CH_CD 0x0008 /* Carrier is present */ -#define CH_FCAR 0x0010 /* Carrier forced on */ -#define CH_HANGUP 0x0020 /* Hangup received */ - -#define CH_RECEIVER_OFF 0x0040 /* Receiver is off */ -#define CH_OPENING 0x0080 /* Port in fragile open state */ -#define CH_CLOSING 0x0100 /* Port in fragile close state */ -#define CH_FIFO_ENABLED 0x0200 /* Port has FIFOs enabled */ -#define CH_TX_FIFO_EMPTY 0x0400 /* TX Fifo is completely empty */ -#define CH_TX_FIFO_LWM 0x0800 /* TX Fifo is below Low Water */ -#define CH_BREAK_SENDING 0x1000 /* Break is being sent */ -#define CH_LOOPBACK 0x2000 /* Channel is in lookback mode */ -#define CH_FLIPBUF_IN_USE 0x4000 /* Channel's flipbuf is in use */ -#define CH_BAUD0 0x08000 /* Used for checking B0 transitions */ - -/* Our Read/Error/Write queue sizes */ -#define RQUEUEMASK 0x1FFF /* 8 K - 1 */ -#define EQUEUEMASK 0x1FFF /* 8 K - 1 */ -#define WQUEUEMASK 0x0FFF /* 4 K - 1 */ -#define RQUEUESIZE (RQUEUEMASK + 1) -#define EQUEUESIZE RQUEUESIZE -#define WQUEUESIZE (WQUEUEMASK + 1) - - -/************************************************************************ - * Channel information structure. - ************************************************************************/ -struct jsm_channel { - struct uart_port uart_port; - struct jsm_board *ch_bd; /* Board structure pointer */ - - spinlock_t ch_lock; /* provide for serialization */ - wait_queue_head_t ch_flags_wait; - - u32 ch_portnum; /* Port number, 0 offset. */ - u32 ch_open_count; /* open count */ - u32 ch_flags; /* Channel flags */ - - u64 ch_close_delay; /* How long we should drop RTS/DTR for */ - - tcflag_t ch_c_iflag; /* channel iflags */ - tcflag_t ch_c_cflag; /* channel cflags */ - tcflag_t ch_c_oflag; /* channel oflags */ - tcflag_t ch_c_lflag; /* channel lflags */ - u8 ch_stopc; /* Stop character */ - u8 ch_startc; /* Start character */ - - u8 ch_mostat; /* FEP output modem status */ - u8 ch_mistat; /* FEP input modem status */ - - struct neo_uart_struct __iomem *ch_neo_uart; /* Pointer to the "mapped" UART struct */ - u8 ch_cached_lsr; /* Cached value of the LSR register */ - - u8 *ch_rqueue; /* Our read queue buffer - malloc'ed */ - u16 ch_r_head; /* Head location of the read queue */ - u16 ch_r_tail; /* Tail location of the read queue */ - - u8 *ch_equeue; /* Our error queue buffer - malloc'ed */ - u16 ch_e_head; /* Head location of the error queue */ - u16 ch_e_tail; /* Tail location of the error queue */ - - u8 *ch_wqueue; /* Our write queue buffer - malloc'ed */ - u16 ch_w_head; /* Head location of the write queue */ - u16 ch_w_tail; /* Tail location of the write queue */ - - u64 ch_rxcount; /* total of data received so far */ - u64 ch_txcount; /* total of data transmitted so far */ - - u8 ch_r_tlevel; /* Receive Trigger level */ - u8 ch_t_tlevel; /* Transmit Trigger level */ - - u8 ch_r_watermark; /* Receive Watermark */ - - - u32 ch_stops_sent; /* How many times I have sent a stop character - * to try to stop the other guy sending. - */ - u64 ch_err_parity; /* Count of parity errors on channel */ - u64 ch_err_frame; /* Count of framing errors on channel */ - u64 ch_err_break; /* Count of breaks on channel */ - u64 ch_err_overrun; /* Count of overruns on channel */ - - u64 ch_xon_sends; /* Count of xons transmitted */ - u64 ch_xoff_sends; /* Count of xoffs transmitted */ -}; - - -/************************************************************************ - * Per channel/port NEO UART structure * - ************************************************************************ - * Base Structure Entries Usage Meanings to Host * - * * - * W = read write R = read only * - * U = Unused. * - ************************************************************************/ - -struct neo_uart_struct { - u8 txrx; /* WR RHR/THR - Holding Reg */ - u8 ier; /* WR IER - Interrupt Enable Reg */ - u8 isr_fcr; /* WR ISR/FCR - Interrupt Status Reg/Fifo Control Reg */ - u8 lcr; /* WR LCR - Line Control Reg */ - u8 mcr; /* WR MCR - Modem Control Reg */ - u8 lsr; /* WR LSR - Line Status Reg */ - u8 msr; /* WR MSR - Modem Status Reg */ - u8 spr; /* WR SPR - Scratch Pad Reg */ - u8 fctr; /* WR FCTR - Feature Control Reg */ - u8 efr; /* WR EFR - Enhanced Function Reg */ - u8 tfifo; /* WR TXCNT/TXTRG - Transmit FIFO Reg */ - u8 rfifo; /* WR RXCNT/RXTRG - Recieve FIFO Reg */ - u8 xoffchar1; /* WR XOFF 1 - XOff Character 1 Reg */ - u8 xoffchar2; /* WR XOFF 2 - XOff Character 2 Reg */ - u8 xonchar1; /* WR XON 1 - Xon Character 1 Reg */ - u8 xonchar2; /* WR XON 2 - XOn Character 2 Reg */ - - u8 reserved1[0x2ff - 0x200]; /* U Reserved by Exar */ - u8 txrxburst[64]; /* RW 64 bytes of RX/TX FIFO Data */ - u8 reserved2[0x37f - 0x340]; /* U Reserved by Exar */ - u8 rxburst_with_errors[64]; /* R 64 bytes of RX FIFO Data + LSR */ -}; - -/* Where to read the extended interrupt register (32bits instead of 8bits) */ -#define UART_17158_POLL_ADDR_OFFSET 0x80 - -/* - * These are the redefinitions for the FCTR on the XR17C158, since - * Exar made them different than their earlier design. (XR16C854) - */ - -/* These are only applicable when table D is selected */ -#define UART_17158_FCTR_RTS_NODELAY 0x00 -#define UART_17158_FCTR_RTS_4DELAY 0x01 -#define UART_17158_FCTR_RTS_6DELAY 0x02 -#define UART_17158_FCTR_RTS_8DELAY 0x03 -#define UART_17158_FCTR_RTS_12DELAY 0x12 -#define UART_17158_FCTR_RTS_16DELAY 0x05 -#define UART_17158_FCTR_RTS_20DELAY 0x13 -#define UART_17158_FCTR_RTS_24DELAY 0x06 -#define UART_17158_FCTR_RTS_28DELAY 0x14 -#define UART_17158_FCTR_RTS_32DELAY 0x07 -#define UART_17158_FCTR_RTS_36DELAY 0x16 -#define UART_17158_FCTR_RTS_40DELAY 0x08 -#define UART_17158_FCTR_RTS_44DELAY 0x09 -#define UART_17158_FCTR_RTS_48DELAY 0x10 -#define UART_17158_FCTR_RTS_52DELAY 0x11 - -#define UART_17158_FCTR_RTS_IRDA 0x10 -#define UART_17158_FCTR_RS485 0x20 -#define UART_17158_FCTR_TRGA 0x00 -#define UART_17158_FCTR_TRGB 0x40 -#define UART_17158_FCTR_TRGC 0x80 -#define UART_17158_FCTR_TRGD 0xC0 - -/* 17158 trigger table selects.. */ -#define UART_17158_FCTR_BIT6 0x40 -#define UART_17158_FCTR_BIT7 0x80 - -/* 17158 TX/RX memmapped buffer offsets */ -#define UART_17158_RX_FIFOSIZE 64 -#define UART_17158_TX_FIFOSIZE 64 - -/* 17158 Extended IIR's */ -#define UART_17158_IIR_RDI_TIMEOUT 0x0C /* Receiver data TIMEOUT */ -#define UART_17158_IIR_XONXOFF 0x10 /* Received an XON/XOFF char */ -#define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20 /* CTS/DSR or RTS/DTR state change */ -#define UART_17158_IIR_FIFO_ENABLED 0xC0 /* 16550 FIFOs are Enabled */ - -/* - * These are the extended interrupts that get sent - * back to us from the UART's 32bit interrupt register - */ -#define UART_17158_RX_LINE_STATUS 0x1 /* RX Ready */ -#define UART_17158_RXRDY_TIMEOUT 0x2 /* RX Ready Timeout */ -#define UART_17158_TXRDY 0x3 /* TX Ready */ -#define UART_17158_MSR 0x4 /* Modem State Change */ -#define UART_17158_TX_AND_FIFO_CLR 0x40 /* Transmitter Holding Reg Empty */ -#define UART_17158_RX_FIFO_DATA_ERROR 0x80 /* UART detected an RX FIFO Data error */ - -/* - * These are the EXTENDED definitions for the 17C158's Interrupt - * Enable Register. - */ -#define UART_17158_EFR_ECB 0x10 /* Enhanced control bit */ -#define UART_17158_EFR_IXON 0x2 /* Receiver compares Xon1/Xoff1 */ -#define UART_17158_EFR_IXOFF 0x8 /* Transmit Xon1/Xoff1 */ -#define UART_17158_EFR_RTSDTR 0x40 /* Auto RTS/DTR Flow Control Enable */ -#define UART_17158_EFR_CTSDSR 0x80 /* Auto CTS/DSR Flow COntrol Enable */ - -#define UART_17158_XOFF_DETECT 0x1 /* Indicates whether chip saw an incoming XOFF char */ -#define UART_17158_XON_DETECT 0x2 /* Indicates whether chip saw an incoming XON char */ - -#define UART_17158_IER_RSVD1 0x10 /* Reserved by Exar */ -#define UART_17158_IER_XOFF 0x20 /* Xoff Interrupt Enable */ -#define UART_17158_IER_RTSDTR 0x40 /* Output Interrupt Enable */ -#define UART_17158_IER_CTSDSR 0x80 /* Input Interrupt Enable */ - -#define PCI_DEVICE_NEO_2DB9_PCI_NAME "Neo 2 - DB9 Universal PCI" -#define PCI_DEVICE_NEO_2DB9PRI_PCI_NAME "Neo 2 - DB9 Universal PCI - Powered Ring Indicator" -#define PCI_DEVICE_NEO_2RJ45_PCI_NAME "Neo 2 - RJ45 Universal PCI" -#define PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME "Neo 2 - RJ45 Universal PCI - Powered Ring Indicator" -#define PCIE_DEVICE_NEO_IBM_PCI_NAME "Neo 4 - PCI Express - IBM" - -/* - * Our Global Variables. - */ -extern struct uart_driver jsm_uart_driver; -extern struct board_ops jsm_neo_ops; -extern int jsm_debug; - -/************************************************************************* - * - * Prototypes for non-static functions used in more than one module - * - *************************************************************************/ -int jsm_tty_write(struct uart_port *port); -int jsm_tty_init(struct jsm_board *); -int jsm_uart_port_init(struct jsm_board *); -int jsm_remove_uart_port(struct jsm_board *); -void jsm_input(struct jsm_channel *ch); -void jsm_check_queue_flow_control(struct jsm_channel *ch); - -#endif diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c deleted file mode 100644 index 18f548449c63..000000000000 --- a/drivers/serial/jsm/jsm_driver.c +++ /dev/null @@ -1,297 +0,0 @@ -/************************************************************************ - * Copyright 2003 Digi International (www.digi.com) - * - * Copyright (C) 2004 IBM Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, - * MA 02111-1307, USA. - * - * Contact Information: - * Scott H Kilau - * Wendy Xiong - * - * - ***********************************************************************/ -#include -#include -#include - -#include "jsm.h" - -MODULE_AUTHOR("Digi International, http://www.digi.com"); -MODULE_DESCRIPTION("Driver for the Digi International " - "Neo PCI based product line"); -MODULE_LICENSE("GPL"); -MODULE_SUPPORTED_DEVICE("jsm"); - -#define JSM_DRIVER_NAME "jsm" -#define NR_PORTS 32 -#define JSM_MINOR_START 0 - -struct uart_driver jsm_uart_driver = { - .owner = THIS_MODULE, - .driver_name = JSM_DRIVER_NAME, - .dev_name = "ttyn", - .major = 0, - .minor = JSM_MINOR_START, - .nr = NR_PORTS, -}; - -static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev, - pci_channel_state_t state); -static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev); -static void jsm_io_resume(struct pci_dev *pdev); - -static struct pci_error_handlers jsm_err_handler = { - .error_detected = jsm_io_error_detected, - .slot_reset = jsm_io_slot_reset, - .resume = jsm_io_resume, -}; - -int jsm_debug; -module_param(jsm_debug, int, 0); -MODULE_PARM_DESC(jsm_debug, "Driver debugging level"); - -static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - int rc = 0; - struct jsm_board *brd; - static int adapter_count = 0; - - rc = pci_enable_device(pdev); - if (rc) { - dev_err(&pdev->dev, "Device enable FAILED\n"); - goto out; - } - - rc = pci_request_regions(pdev, "jsm"); - if (rc) { - dev_err(&pdev->dev, "pci_request_region FAILED\n"); - goto out_disable_device; - } - - brd = kzalloc(sizeof(struct jsm_board), GFP_KERNEL); - if (!brd) { - dev_err(&pdev->dev, - "memory allocation for board structure failed\n"); - rc = -ENOMEM; - goto out_release_regions; - } - - /* store the info for the board we've found */ - brd->boardnum = adapter_count++; - brd->pci_dev = pdev; - if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM) - brd->maxports = 4; - else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8) - brd->maxports = 8; - else - brd->maxports = 2; - - spin_lock_init(&brd->bd_intr_lock); - - /* store which revision we have */ - brd->rev = pdev->revision; - - brd->irq = pdev->irq; - - jsm_printk(INIT, INFO, &brd->pci_dev, - "jsm_found_board - NEO adapter\n"); - - /* get the PCI Base Address Registers */ - brd->membase = pci_resource_start(pdev, 0); - brd->membase_end = pci_resource_end(pdev, 0); - - if (brd->membase & 1) - brd->membase &= ~3; - else - brd->membase &= ~15; - - /* Assign the board_ops struct */ - brd->bd_ops = &jsm_neo_ops; - - brd->bd_uart_offset = 0x200; - brd->bd_dividend = 921600; - - brd->re_map_membase = ioremap(brd->membase, 0x1000); - if (!brd->re_map_membase) { - dev_err(&pdev->dev, - "card has no PCI Memory resources, " - "failing board.\n"); - rc = -ENOMEM; - goto out_kfree_brd; - } - - rc = request_irq(brd->irq, brd->bd_ops->intr, - IRQF_SHARED, "JSM", brd); - if (rc) { - printk(KERN_WARNING "Failed to hook IRQ %d\n",brd->irq); - goto out_iounmap; - } - - rc = jsm_tty_init(brd); - if (rc < 0) { - dev_err(&pdev->dev, "Can't init tty devices (%d)\n", rc); - rc = -ENXIO; - goto out_free_irq; - } - - rc = jsm_uart_port_init(brd); - if (rc < 0) { - /* XXX: leaking all resources from jsm_tty_init here! */ - dev_err(&pdev->dev, "Can't init uart port (%d)\n", rc); - rc = -ENXIO; - goto out_free_irq; - } - - /* Log the information about the board */ - dev_info(&pdev->dev, "board %d: Digi Neo (rev %d), irq %d\n", - adapter_count, brd->rev, brd->irq); - - /* - * allocate flip buffer for board. - * - * Okay to malloc with GFP_KERNEL, we are not at interrupt - * context, and there are no locks held. - */ - brd->flipbuf = kzalloc(MYFLIPLEN, GFP_KERNEL); - if (!brd->flipbuf) { - /* XXX: leaking all resources from jsm_tty_init and - jsm_uart_port_init here! */ - dev_err(&pdev->dev, "memory allocation for flipbuf failed\n"); - rc = -ENOMEM; - goto out_free_uart; - } - - pci_set_drvdata(pdev, brd); - pci_save_state(pdev); - - return 0; - out_free_uart: - jsm_remove_uart_port(brd); - out_free_irq: - jsm_remove_uart_port(brd); - free_irq(brd->irq, brd); - out_iounmap: - iounmap(brd->re_map_membase); - out_kfree_brd: - kfree(brd); - out_release_regions: - pci_release_regions(pdev); - out_disable_device: - pci_disable_device(pdev); - out: - return rc; -} - -static void __devexit jsm_remove_one(struct pci_dev *pdev) -{ - struct jsm_board *brd = pci_get_drvdata(pdev); - int i = 0; - - jsm_remove_uart_port(brd); - - free_irq(brd->irq, brd); - iounmap(brd->re_map_membase); - - /* Free all allocated channels structs */ - for (i = 0; i < brd->maxports; i++) { - if (brd->channels[i]) { - kfree(brd->channels[i]->ch_rqueue); - kfree(brd->channels[i]->ch_equeue); - kfree(brd->channels[i]->ch_wqueue); - kfree(brd->channels[i]); - } - } - - pci_release_regions(pdev); - pci_disable_device(pdev); - kfree(brd->flipbuf); - kfree(brd); -} - -static struct pci_device_id jsm_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9), 0, 0, 0 }, - { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9PRI), 0, 0, 1 }, - { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 }, - { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 }, - { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 }, - { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 }, - { 0, } -}; -MODULE_DEVICE_TABLE(pci, jsm_pci_tbl); - -static struct pci_driver jsm_driver = { - .name = "jsm", - .id_table = jsm_pci_tbl, - .probe = jsm_probe_one, - .remove = __devexit_p(jsm_remove_one), - .err_handler = &jsm_err_handler, -}; - -static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev, - pci_channel_state_t state) -{ - struct jsm_board *brd = pci_get_drvdata(pdev); - - jsm_remove_uart_port(brd); - - return PCI_ERS_RESULT_NEED_RESET; -} - -static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev) -{ - int rc; - - rc = pci_enable_device(pdev); - - if (rc) - return PCI_ERS_RESULT_DISCONNECT; - - pci_set_master(pdev); - - return PCI_ERS_RESULT_RECOVERED; -} - -static void jsm_io_resume(struct pci_dev *pdev) -{ - struct jsm_board *brd = pci_get_drvdata(pdev); - - pci_restore_state(pdev); - - jsm_uart_port_init(brd); -} - -static int __init jsm_init_module(void) -{ - int rc; - - rc = uart_register_driver(&jsm_uart_driver); - if (!rc) { - rc = pci_register_driver(&jsm_driver); - if (rc) - uart_unregister_driver(&jsm_uart_driver); - } - return rc; -} - -static void __exit jsm_exit_module(void) -{ - pci_unregister_driver(&jsm_driver); - uart_unregister_driver(&jsm_uart_driver); -} - -module_init(jsm_init_module); -module_exit(jsm_exit_module); diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c deleted file mode 100644 index 7960d9633c15..000000000000 --- a/drivers/serial/jsm/jsm_neo.c +++ /dev/null @@ -1,1412 +0,0 @@ -/************************************************************************ - * Copyright 2003 Digi International (www.digi.com) - * - * Copyright (C) 2004 IBM Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, - * MA 02111-1307, USA. - * - * Contact Information: - * Scott H Kilau - * Wendy Xiong - * - ***********************************************************************/ -#include /* For udelay */ -#include /* For the various UART offsets */ -#include -#include -#include - -#include "jsm.h" /* Driver main header file */ - -static u32 jsm_offset_table[8] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 }; - -/* - * This function allows calls to ensure that all outstanding - * PCI writes have been completed, by doing a PCI read against - * a non-destructive, read-only location on the Neo card. - * - * In this case, we are reading the DVID (Read-only Device Identification) - * value of the Neo card. - */ -static inline void neo_pci_posting_flush(struct jsm_board *bd) -{ - readb(bd->re_map_membase + 0x8D); -} - -static void neo_set_cts_flow_control(struct jsm_channel *ch) -{ - u8 ier, efr; - ier = readb(&ch->ch_neo_uart->ier); - efr = readb(&ch->ch_neo_uart->efr); - - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n"); - - /* Turn on auto CTS flow control */ - ier |= (UART_17158_IER_CTSDSR); - efr |= (UART_17158_EFR_ECB | UART_17158_EFR_CTSDSR); - - /* Turn off auto Xon flow control */ - efr &= ~(UART_17158_EFR_IXON); - - /* Why? Becuz Exar's spec says we have to zero it out before setting it */ - writeb(0, &ch->ch_neo_uart->efr); - - /* Turn on UART enhanced bits */ - writeb(efr, &ch->ch_neo_uart->efr); - - /* Turn on table D, with 8 char hi/low watermarks */ - writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr); - - /* Feed the UART our trigger levels */ - writeb(8, &ch->ch_neo_uart->tfifo); - ch->ch_t_tlevel = 8; - - writeb(ier, &ch->ch_neo_uart->ier); -} - -static void neo_set_rts_flow_control(struct jsm_channel *ch) -{ - u8 ier, efr; - ier = readb(&ch->ch_neo_uart->ier); - efr = readb(&ch->ch_neo_uart->efr); - - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n"); - - /* Turn on auto RTS flow control */ - ier |= (UART_17158_IER_RTSDTR); - efr |= (UART_17158_EFR_ECB | UART_17158_EFR_RTSDTR); - - /* Turn off auto Xoff flow control */ - ier &= ~(UART_17158_IER_XOFF); - efr &= ~(UART_17158_EFR_IXOFF); - - /* Why? Becuz Exar's spec says we have to zero it out before setting it */ - writeb(0, &ch->ch_neo_uart->efr); - - /* Turn on UART enhanced bits */ - writeb(efr, &ch->ch_neo_uart->efr); - - writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr); - ch->ch_r_watermark = 4; - - writeb(56, &ch->ch_neo_uart->rfifo); - ch->ch_r_tlevel = 56; - - writeb(ier, &ch->ch_neo_uart->ier); - - /* - * From the Neo UART spec sheet: - * The auto RTS/DTR function must be started by asserting - * RTS/DTR# output pin (MCR bit-0 or 1 to logic 1 after - * it is enabled. - */ - ch->ch_mostat |= (UART_MCR_RTS); -} - - -static void neo_set_ixon_flow_control(struct jsm_channel *ch) -{ - u8 ier, efr; - ier = readb(&ch->ch_neo_uart->ier); - efr = readb(&ch->ch_neo_uart->efr); - - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n"); - - /* Turn off auto CTS flow control */ - ier &= ~(UART_17158_IER_CTSDSR); - efr &= ~(UART_17158_EFR_CTSDSR); - - /* Turn on auto Xon flow control */ - efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXON); - - /* Why? Becuz Exar's spec says we have to zero it out before setting it */ - writeb(0, &ch->ch_neo_uart->efr); - - /* Turn on UART enhanced bits */ - writeb(efr, &ch->ch_neo_uart->efr); - - writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); - ch->ch_r_watermark = 4; - - writeb(32, &ch->ch_neo_uart->rfifo); - ch->ch_r_tlevel = 32; - - /* Tell UART what start/stop chars it should be looking for */ - writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); - writeb(0, &ch->ch_neo_uart->xonchar2); - - writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); - writeb(0, &ch->ch_neo_uart->xoffchar2); - - writeb(ier, &ch->ch_neo_uart->ier); -} - -static void neo_set_ixoff_flow_control(struct jsm_channel *ch) -{ - u8 ier, efr; - ier = readb(&ch->ch_neo_uart->ier); - efr = readb(&ch->ch_neo_uart->efr); - - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n"); - - /* Turn off auto RTS flow control */ - ier &= ~(UART_17158_IER_RTSDTR); - efr &= ~(UART_17158_EFR_RTSDTR); - - /* Turn on auto Xoff flow control */ - ier |= (UART_17158_IER_XOFF); - efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXOFF); - - /* Why? Becuz Exar's spec says we have to zero it out before setting it */ - writeb(0, &ch->ch_neo_uart->efr); - - /* Turn on UART enhanced bits */ - writeb(efr, &ch->ch_neo_uart->efr); - - /* Turn on table D, with 8 char hi/low watermarks */ - writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); - - writeb(8, &ch->ch_neo_uart->tfifo); - ch->ch_t_tlevel = 8; - - /* Tell UART what start/stop chars it should be looking for */ - writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); - writeb(0, &ch->ch_neo_uart->xonchar2); - - writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); - writeb(0, &ch->ch_neo_uart->xoffchar2); - - writeb(ier, &ch->ch_neo_uart->ier); -} - -static void neo_set_no_input_flow_control(struct jsm_channel *ch) -{ - u8 ier, efr; - ier = readb(&ch->ch_neo_uart->ier); - efr = readb(&ch->ch_neo_uart->efr); - - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n"); - - /* Turn off auto RTS flow control */ - ier &= ~(UART_17158_IER_RTSDTR); - efr &= ~(UART_17158_EFR_RTSDTR); - - /* Turn off auto Xoff flow control */ - ier &= ~(UART_17158_IER_XOFF); - if (ch->ch_c_iflag & IXON) - efr &= ~(UART_17158_EFR_IXOFF); - else - efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXOFF); - - /* Why? Becuz Exar's spec says we have to zero it out before setting it */ - writeb(0, &ch->ch_neo_uart->efr); - - /* Turn on UART enhanced bits */ - writeb(efr, &ch->ch_neo_uart->efr); - - /* Turn on table D, with 8 char hi/low watermarks */ - writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); - - ch->ch_r_watermark = 0; - - writeb(16, &ch->ch_neo_uart->tfifo); - ch->ch_t_tlevel = 16; - - writeb(16, &ch->ch_neo_uart->rfifo); - ch->ch_r_tlevel = 16; - - writeb(ier, &ch->ch_neo_uart->ier); -} - -static void neo_set_no_output_flow_control(struct jsm_channel *ch) -{ - u8 ier, efr; - ier = readb(&ch->ch_neo_uart->ier); - efr = readb(&ch->ch_neo_uart->efr); - - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n"); - - /* Turn off auto CTS flow control */ - ier &= ~(UART_17158_IER_CTSDSR); - efr &= ~(UART_17158_EFR_CTSDSR); - - /* Turn off auto Xon flow control */ - if (ch->ch_c_iflag & IXOFF) - efr &= ~(UART_17158_EFR_IXON); - else - efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXON); - - /* Why? Becuz Exar's spec says we have to zero it out before setting it */ - writeb(0, &ch->ch_neo_uart->efr); - - /* Turn on UART enhanced bits */ - writeb(efr, &ch->ch_neo_uart->efr); - - /* Turn on table D, with 8 char hi/low watermarks */ - writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); - - ch->ch_r_watermark = 0; - - writeb(16, &ch->ch_neo_uart->tfifo); - ch->ch_t_tlevel = 16; - - writeb(16, &ch->ch_neo_uart->rfifo); - ch->ch_r_tlevel = 16; - - writeb(ier, &ch->ch_neo_uart->ier); -} - -static inline void neo_set_new_start_stop_chars(struct jsm_channel *ch) -{ - - /* if hardware flow control is set, then skip this whole thing */ - if (ch->ch_c_cflag & CRTSCTS) - return; - - jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "start\n"); - - /* Tell UART what start/stop chars it should be looking for */ - writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); - writeb(0, &ch->ch_neo_uart->xonchar2); - - writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); - writeb(0, &ch->ch_neo_uart->xoffchar2); -} - -static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch) -{ - int qleft = 0; - u8 linestatus = 0; - u8 error_mask = 0; - int n = 0; - int total = 0; - u16 head; - u16 tail; - - if (!ch) - return; - - /* cache head and tail of queue */ - head = ch->ch_r_head & RQUEUEMASK; - tail = ch->ch_r_tail & RQUEUEMASK; - - /* Get our cached LSR */ - linestatus = ch->ch_cached_lsr; - ch->ch_cached_lsr = 0; - - /* Store how much space we have left in the queue */ - if ((qleft = tail - head - 1) < 0) - qleft += RQUEUEMASK + 1; - - /* - * If the UART is not in FIFO mode, force the FIFO copy to - * NOT be run, by setting total to 0. - * - * On the other hand, if the UART IS in FIFO mode, then ask - * the UART to give us an approximation of data it has RX'ed. - */ - if (!(ch->ch_flags & CH_FIFO_ENABLED)) - total = 0; - else { - total = readb(&ch->ch_neo_uart->rfifo); - - /* - * EXAR chip bug - RX FIFO COUNT - Fudge factor. - * - * This resolves a problem/bug with the Exar chip that sometimes - * returns a bogus value in the rfifo register. - * The count can be any where from 0-3 bytes "off". - * Bizarre, but true. - */ - total -= 3; - } - - /* - * Finally, bound the copy to make sure we don't overflow - * our own queue... - * The byte by byte copy loop below this loop this will - * deal with the queue overflow possibility. - */ - total = min(total, qleft); - - while (total > 0) { - /* - * Grab the linestatus register, we need to check - * to see if there are any errors in the FIFO. - */ - linestatus = readb(&ch->ch_neo_uart->lsr); - - /* - * Break out if there is a FIFO error somewhere. - * This will allow us to go byte by byte down below, - * finding the exact location of the error. - */ - if (linestatus & UART_17158_RX_FIFO_DATA_ERROR) - break; - - /* Make sure we don't go over the end of our queue */ - n = min(((u32) total), (RQUEUESIZE - (u32) head)); - - /* - * Cut down n even further if needed, this is to fix - * a problem with memcpy_fromio() with the Neo on the - * IBM pSeries platform. - * 15 bytes max appears to be the magic number. - */ - n = min((u32) n, (u32) 12); - - /* - * Since we are grabbing the linestatus register, which - * will reset some bits after our read, we need to ensure - * we don't miss our TX FIFO emptys. - */ - if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) - ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - - linestatus = 0; - - /* Copy data from uart to the queue */ - memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n); - /* - * Since RX_FIFO_DATA_ERROR was 0, we are guarenteed - * that all the data currently in the FIFO is free of - * breaks and parity/frame/orun errors. - */ - memset(ch->ch_equeue + head, 0, n); - - /* Add to and flip head if needed */ - head = (head + n) & RQUEUEMASK; - total -= n; - qleft -= n; - ch->ch_rxcount += n; - } - - /* - * Create a mask to determine whether we should - * insert the character (if any) into our queue. - */ - if (ch->ch_c_iflag & IGNBRK) - error_mask |= UART_LSR_BI; - - /* - * Now cleanup any leftover bytes still in the UART. - * Also deal with any possible queue overflow here as well. - */ - while (1) { - - /* - * Its possible we have a linestatus from the loop above - * this, so we "OR" on any extra bits. - */ - linestatus |= readb(&ch->ch_neo_uart->lsr); - - /* - * If the chip tells us there is no more data pending to - * be read, we can then leave. - * But before we do, cache the linestatus, just in case. - */ - if (!(linestatus & UART_LSR_DR)) { - ch->ch_cached_lsr = linestatus; - break; - } - - /* No need to store this bit */ - linestatus &= ~UART_LSR_DR; - - /* - * Since we are grabbing the linestatus register, which - * will reset some bits after our read, we need to ensure - * we don't miss our TX FIFO emptys. - */ - if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) { - linestatus &= ~(UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR); - ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - } - - /* - * Discard character if we are ignoring the error mask. - */ - if (linestatus & error_mask) { - u8 discard; - linestatus = 0; - memcpy_fromio(&discard, &ch->ch_neo_uart->txrxburst, 1); - continue; - } - - /* - * If our queue is full, we have no choice but to drop some data. - * The assumption is that HWFLOW or SWFLOW should have stopped - * things way way before we got to this point. - * - * I decided that I wanted to ditch the oldest data first, - * I hope thats okay with everyone? Yes? Good. - */ - while (qleft < 1) { - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "Queue full, dropping DATA:%x LSR:%x\n", - ch->ch_rqueue[tail], ch->ch_equeue[tail]); - - ch->ch_r_tail = tail = (tail + 1) & RQUEUEMASK; - ch->ch_err_overrun++; - qleft++; - } - - memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, 1); - ch->ch_equeue[head] = (u8) linestatus; - - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "DATA/LSR pair: %x %x\n", ch->ch_rqueue[head], ch->ch_equeue[head]); - - /* Ditch any remaining linestatus value. */ - linestatus = 0; - - /* Add to and flip head if needed */ - head = (head + 1) & RQUEUEMASK; - - qleft--; - ch->ch_rxcount++; - } - - /* - * Write new final heads to channel structure. - */ - ch->ch_r_head = head & RQUEUEMASK; - ch->ch_e_head = head & EQUEUEMASK; - jsm_input(ch); -} - -static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch) -{ - u16 head; - u16 tail; - int n; - int s; - int qlen; - u32 len_written = 0; - - if (!ch) - return; - - /* No data to write to the UART */ - if (ch->ch_w_tail == ch->ch_w_head) - return; - - /* If port is "stopped", don't send any data to the UART */ - if ((ch->ch_flags & CH_STOP) || (ch->ch_flags & CH_BREAK_SENDING)) - return; - /* - * If FIFOs are disabled. Send data directly to txrx register - */ - if (!(ch->ch_flags & CH_FIFO_ENABLED)) { - u8 lsrbits = readb(&ch->ch_neo_uart->lsr); - - ch->ch_cached_lsr |= lsrbits; - if (ch->ch_cached_lsr & UART_LSR_THRE) { - ch->ch_cached_lsr &= ~(UART_LSR_THRE); - - writeb(ch->ch_wqueue[ch->ch_w_tail], &ch->ch_neo_uart->txrx); - jsm_printk(WRITE, INFO, &ch->ch_bd->pci_dev, - "Tx data: %x\n", ch->ch_wqueue[ch->ch_w_head]); - ch->ch_w_tail++; - ch->ch_w_tail &= WQUEUEMASK; - ch->ch_txcount++; - } - return; - } - - /* - * We have to do it this way, because of the EXAR TXFIFO count bug. - */ - if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM))) - return; - - n = UART_17158_TX_FIFOSIZE - ch->ch_t_tlevel; - - /* cache head and tail of queue */ - head = ch->ch_w_head & WQUEUEMASK; - tail = ch->ch_w_tail & WQUEUEMASK; - qlen = (head - tail) & WQUEUEMASK; - - /* Find minimum of the FIFO space, versus queue length */ - n = min(n, qlen); - - while (n > 0) { - - s = ((head >= tail) ? head : WQUEUESIZE) - tail; - s = min(s, n); - - if (s <= 0) - break; - - memcpy_toio(&ch->ch_neo_uart->txrxburst, ch->ch_wqueue + tail, s); - /* Add and flip queue if needed */ - tail = (tail + s) & WQUEUEMASK; - n -= s; - ch->ch_txcount += s; - len_written += s; - } - - /* Update the final tail */ - ch->ch_w_tail = tail & WQUEUEMASK; - - if (len_written >= ch->ch_t_tlevel) - ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - - if (!jsm_tty_write(&ch->uart_port)) - uart_write_wakeup(&ch->uart_port); -} - -static void neo_parse_modem(struct jsm_channel *ch, u8 signals) -{ - u8 msignals = signals; - - jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev, - "neo_parse_modem: port: %d msignals: %x\n", ch->ch_portnum, msignals); - - /* Scrub off lower bits. They signify delta's, which I don't care about */ - /* Keep DDCD and DDSR though */ - msignals &= 0xf8; - - if (msignals & UART_MSR_DDCD) - uart_handle_dcd_change(&ch->uart_port, msignals & UART_MSR_DCD); - if (msignals & UART_MSR_DDSR) - uart_handle_cts_change(&ch->uart_port, msignals & UART_MSR_CTS); - if (msignals & UART_MSR_DCD) - ch->ch_mistat |= UART_MSR_DCD; - else - ch->ch_mistat &= ~UART_MSR_DCD; - - if (msignals & UART_MSR_DSR) - ch->ch_mistat |= UART_MSR_DSR; - else - ch->ch_mistat &= ~UART_MSR_DSR; - - if (msignals & UART_MSR_RI) - ch->ch_mistat |= UART_MSR_RI; - else - ch->ch_mistat &= ~UART_MSR_RI; - - if (msignals & UART_MSR_CTS) - ch->ch_mistat |= UART_MSR_CTS; - else - ch->ch_mistat &= ~UART_MSR_CTS; - - jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev, - "Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n", - ch->ch_portnum, - !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR), - !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS), - !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_CTS), - !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DSR), - !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_RI), - !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DCD)); -} - -/* Make the UART raise any of the output signals we want up */ -static void neo_assert_modem_signals(struct jsm_channel *ch) -{ - if (!ch) - return; - - writeb(ch->ch_mostat, &ch->ch_neo_uart->mcr); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); -} - -/* - * Flush the WRITE FIFO on the Neo. - * - * NOTE: Channel lock MUST be held before calling this function! - */ -static void neo_flush_uart_write(struct jsm_channel *ch) -{ - u8 tmp = 0; - int i = 0; - - if (!ch) - return; - - writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr); - - for (i = 0; i < 10; i++) { - - /* Check to see if the UART feels it completely flushed the FIFO. */ - tmp = readb(&ch->ch_neo_uart->isr_fcr); - if (tmp & 4) { - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, - "Still flushing TX UART... i: %d\n", i); - udelay(10); - } - else - break; - } - - ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); -} - - -/* - * Flush the READ FIFO on the Neo. - * - * NOTE: Channel lock MUST be held before calling this function! - */ -static void neo_flush_uart_read(struct jsm_channel *ch) -{ - u8 tmp = 0; - int i = 0; - - if (!ch) - return; - - writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR), &ch->ch_neo_uart->isr_fcr); - - for (i = 0; i < 10; i++) { - - /* Check to see if the UART feels it completely flushed the FIFO. */ - tmp = readb(&ch->ch_neo_uart->isr_fcr); - if (tmp & 2) { - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, - "Still flushing RX UART... i: %d\n", i); - udelay(10); - } - else - break; - } -} - -/* - * No locks are assumed to be held when calling this function. - */ -static void neo_clear_break(struct jsm_channel *ch, int force) -{ - unsigned long lock_flags; - - spin_lock_irqsave(&ch->ch_lock, lock_flags); - - /* Turn break off, and unset some variables */ - if (ch->ch_flags & CH_BREAK_SENDING) { - u8 temp = readb(&ch->ch_neo_uart->lcr); - writeb((temp & ~UART_LCR_SBC), &ch->ch_neo_uart->lcr); - - ch->ch_flags &= ~(CH_BREAK_SENDING); - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, - "clear break Finishing UART_LCR_SBC! finished: %lx\n", jiffies); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); - } - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); -} - -/* - * Parse the ISR register. - */ -static inline void neo_parse_isr(struct jsm_board *brd, u32 port) -{ - struct jsm_channel *ch; - u8 isr; - u8 cause; - unsigned long lock_flags; - - if (!brd) - return; - - if (port > brd->maxports) - return; - - ch = brd->channels[port]; - if (!ch) - return; - - /* Here we try to figure out what caused the interrupt to happen */ - while (1) { - - isr = readb(&ch->ch_neo_uart->isr_fcr); - - /* Bail if no pending interrupt */ - if (isr & UART_IIR_NO_INT) - break; - - /* - * Yank off the upper 2 bits, which just show that the FIFO's are enabled. - */ - isr &= ~(UART_17158_IIR_FIFO_ENABLED); - - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "%s:%d isr: %x\n", __FILE__, __LINE__, isr); - - if (isr & (UART_17158_IIR_RDI_TIMEOUT | UART_IIR_RDI)) { - /* Read data from uart -> queue */ - neo_copy_data_from_uart_to_queue(ch); - - /* Call our tty layer to enforce queue flow control if needed. */ - spin_lock_irqsave(&ch->ch_lock, lock_flags); - jsm_check_queue_flow_control(ch); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - } - - if (isr & UART_IIR_THRI) { - /* Transfer data (if any) from Write Queue -> UART. */ - spin_lock_irqsave(&ch->ch_lock, lock_flags); - ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - neo_copy_data_from_queue_to_uart(ch); - } - - if (isr & UART_17158_IIR_XONXOFF) { - cause = readb(&ch->ch_neo_uart->xoffchar1); - - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "Port %d. Got ISR_XONXOFF: cause:%x\n", port, cause); - - /* - * Since the UART detected either an XON or - * XOFF match, we need to figure out which - * one it was, so we can suspend or resume data flow. - */ - spin_lock_irqsave(&ch->ch_lock, lock_flags); - if (cause == UART_17158_XON_DETECT) { - /* Is output stopped right now, if so, resume it */ - if (brd->channels[port]->ch_flags & CH_STOP) { - ch->ch_flags &= ~(CH_STOP); - } - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "Port %d. XON detected in incoming data\n", port); - } - else if (cause == UART_17158_XOFF_DETECT) { - if (!(brd->channels[port]->ch_flags & CH_STOP)) { - ch->ch_flags |= CH_STOP; - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "Setting CH_STOP\n"); - } - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "Port: %d. XOFF detected in incoming data\n", port); - } - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - } - - if (isr & UART_17158_IIR_HWFLOW_STATE_CHANGE) { - /* - * If we get here, this means the hardware is doing auto flow control. - * Check to see whether RTS/DTR or CTS/DSR caused this interrupt. - */ - cause = readb(&ch->ch_neo_uart->mcr); - - /* Which pin is doing auto flow? RTS or DTR? */ - spin_lock_irqsave(&ch->ch_lock, lock_flags); - if ((cause & 0x4) == 0) { - if (cause & UART_MCR_RTS) - ch->ch_mostat |= UART_MCR_RTS; - else - ch->ch_mostat &= ~(UART_MCR_RTS); - } else { - if (cause & UART_MCR_DTR) - ch->ch_mostat |= UART_MCR_DTR; - else - ch->ch_mostat &= ~(UART_MCR_DTR); - } - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - } - - /* Parse any modem signal changes */ - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "MOD_STAT: sending to parse_modem_sigs\n"); - neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr)); - } -} - -static inline void neo_parse_lsr(struct jsm_board *brd, u32 port) -{ - struct jsm_channel *ch; - int linestatus; - unsigned long lock_flags; - - if (!brd) - return; - - if (port > brd->maxports) - return; - - ch = brd->channels[port]; - if (!ch) - return; - - linestatus = readb(&ch->ch_neo_uart->lsr); - - jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, - "%s:%d port: %d linestatus: %x\n", __FILE__, __LINE__, port, linestatus); - - ch->ch_cached_lsr |= linestatus; - - if (ch->ch_cached_lsr & UART_LSR_DR) { - /* Read data from uart -> queue */ - neo_copy_data_from_uart_to_queue(ch); - spin_lock_irqsave(&ch->ch_lock, lock_flags); - jsm_check_queue_flow_control(ch); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - } - - /* - * This is a special flag. It indicates that at least 1 - * RX error (parity, framing, or break) has happened. - * Mark this in our struct, which will tell me that I have - *to do the special RX+LSR read for this FIFO load. - */ - if (linestatus & UART_17158_RX_FIFO_DATA_ERROR) - jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, - "%s:%d Port: %d Got an RX error, need to parse LSR\n", - __FILE__, __LINE__, port); - - /* - * The next 3 tests should *NOT* happen, as the above test - * should encapsulate all 3... At least, thats what Exar says. - */ - - if (linestatus & UART_LSR_PE) { - ch->ch_err_parity++; - jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, - "%s:%d Port: %d. PAR ERR!\n", __FILE__, __LINE__, port); - } - - if (linestatus & UART_LSR_FE) { - ch->ch_err_frame++; - jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, - "%s:%d Port: %d. FRM ERR!\n", __FILE__, __LINE__, port); - } - - if (linestatus & UART_LSR_BI) { - ch->ch_err_break++; - jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, - "%s:%d Port: %d. BRK INTR!\n", __FILE__, __LINE__, port); - } - - if (linestatus & UART_LSR_OE) { - /* - * Rx Oruns. Exar says that an orun will NOT corrupt - * the FIFO. It will just replace the holding register - * with this new data byte. So basically just ignore this. - * Probably we should eventually have an orun stat in our driver... - */ - ch->ch_err_overrun++; - jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, - "%s:%d Port: %d. Rx Overrun!\n", __FILE__, __LINE__, port); - } - - if (linestatus & UART_LSR_THRE) { - spin_lock_irqsave(&ch->ch_lock, lock_flags); - ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - /* Transfer data (if any) from Write Queue -> UART. */ - neo_copy_data_from_queue_to_uart(ch); - } - else if (linestatus & UART_17158_TX_AND_FIFO_CLR) { - spin_lock_irqsave(&ch->ch_lock, lock_flags); - ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - /* Transfer data (if any) from Write Queue -> UART. */ - neo_copy_data_from_queue_to_uart(ch); - } -} - -/* - * neo_param() - * Send any/all changes to the line to the UART. - */ -static void neo_param(struct jsm_channel *ch) -{ - u8 lcr = 0; - u8 uart_lcr, ier; - u32 baud; - int quot; - struct jsm_board *bd; - - bd = ch->ch_bd; - if (!bd) - return; - - /* - * If baud rate is zero, flush queues, and set mval to drop DTR. - */ - if ((ch->ch_c_cflag & (CBAUD)) == 0) { - ch->ch_r_head = ch->ch_r_tail = 0; - ch->ch_e_head = ch->ch_e_tail = 0; - ch->ch_w_head = ch->ch_w_tail = 0; - - neo_flush_uart_write(ch); - neo_flush_uart_read(ch); - - ch->ch_flags |= (CH_BAUD0); - ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR); - neo_assert_modem_signals(ch); - return; - - } else { - int i; - unsigned int cflag; - static struct { - unsigned int rate; - unsigned int cflag; - } baud_rates[] = { - { 921600, B921600 }, - { 460800, B460800 }, - { 230400, B230400 }, - { 115200, B115200 }, - { 57600, B57600 }, - { 38400, B38400 }, - { 19200, B19200 }, - { 9600, B9600 }, - { 4800, B4800 }, - { 2400, B2400 }, - { 1200, B1200 }, - { 600, B600 }, - { 300, B300 }, - { 200, B200 }, - { 150, B150 }, - { 134, B134 }, - { 110, B110 }, - { 75, B75 }, - { 50, B50 }, - }; - - cflag = C_BAUD(ch->uart_port.state->port.tty); - baud = 9600; - for (i = 0; i < ARRAY_SIZE(baud_rates); i++) { - if (baud_rates[i].cflag == cflag) { - baud = baud_rates[i].rate; - break; - } - } - - if (ch->ch_flags & CH_BAUD0) - ch->ch_flags &= ~(CH_BAUD0); - } - - if (ch->ch_c_cflag & PARENB) - lcr |= UART_LCR_PARITY; - - if (!(ch->ch_c_cflag & PARODD)) - lcr |= UART_LCR_EPAR; - - /* - * Not all platforms support mark/space parity, - * so this will hide behind an ifdef. - */ -#ifdef CMSPAR - if (ch->ch_c_cflag & CMSPAR) - lcr |= UART_LCR_SPAR; -#endif - - if (ch->ch_c_cflag & CSTOPB) - lcr |= UART_LCR_STOP; - - switch (ch->ch_c_cflag & CSIZE) { - case CS5: - lcr |= UART_LCR_WLEN5; - break; - case CS6: - lcr |= UART_LCR_WLEN6; - break; - case CS7: - lcr |= UART_LCR_WLEN7; - break; - case CS8: - default: - lcr |= UART_LCR_WLEN8; - break; - } - - ier = readb(&ch->ch_neo_uart->ier); - uart_lcr = readb(&ch->ch_neo_uart->lcr); - - if (baud == 0) - baud = 9600; - - quot = ch->ch_bd->bd_dividend / baud; - - if (quot != 0) { - writeb(UART_LCR_DLAB, &ch->ch_neo_uart->lcr); - writeb((quot & 0xff), &ch->ch_neo_uart->txrx); - writeb((quot >> 8), &ch->ch_neo_uart->ier); - writeb(lcr, &ch->ch_neo_uart->lcr); - } - - if (uart_lcr != lcr) - writeb(lcr, &ch->ch_neo_uart->lcr); - - if (ch->ch_c_cflag & CREAD) - ier |= (UART_IER_RDI | UART_IER_RLSI); - - ier |= (UART_IER_THRI | UART_IER_MSI); - - writeb(ier, &ch->ch_neo_uart->ier); - - /* Set new start/stop chars */ - neo_set_new_start_stop_chars(ch); - - if (ch->ch_c_cflag & CRTSCTS) - neo_set_cts_flow_control(ch); - else if (ch->ch_c_iflag & IXON) { - /* If start/stop is set to disable, then we should disable flow control */ - if ((ch->ch_startc == __DISABLED_CHAR) || (ch->ch_stopc == __DISABLED_CHAR)) - neo_set_no_output_flow_control(ch); - else - neo_set_ixon_flow_control(ch); - } - else - neo_set_no_output_flow_control(ch); - - if (ch->ch_c_cflag & CRTSCTS) - neo_set_rts_flow_control(ch); - else if (ch->ch_c_iflag & IXOFF) { - /* If start/stop is set to disable, then we should disable flow control */ - if ((ch->ch_startc == __DISABLED_CHAR) || (ch->ch_stopc == __DISABLED_CHAR)) - neo_set_no_input_flow_control(ch); - else - neo_set_ixoff_flow_control(ch); - } - else - neo_set_no_input_flow_control(ch); - /* - * Adjust the RX FIFO Trigger level if baud is less than 9600. - * Not exactly elegant, but this is needed because of the Exar chip's - * delay on firing off the RX FIFO interrupt on slower baud rates. - */ - if (baud < 9600) { - writeb(1, &ch->ch_neo_uart->rfifo); - ch->ch_r_tlevel = 1; - } - - neo_assert_modem_signals(ch); - - /* Get current status of the modem signals now */ - neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr)); - return; -} - -/* - * jsm_neo_intr() - * - * Neo specific interrupt handler. - */ -static irqreturn_t neo_intr(int irq, void *voidbrd) -{ - struct jsm_board *brd = voidbrd; - struct jsm_channel *ch; - int port = 0; - int type = 0; - int current_port; - u32 tmp; - u32 uart_poll; - unsigned long lock_flags; - unsigned long lock_flags2; - int outofloop_count = 0; - - /* Lock out the slow poller from running on this board. */ - spin_lock_irqsave(&brd->bd_intr_lock, lock_flags); - - /* - * Read in "extended" IRQ information from the 32bit Neo register. - * Bits 0-7: What port triggered the interrupt. - * Bits 8-31: Each 3bits indicate what type of interrupt occurred. - */ - uart_poll = readl(brd->re_map_membase + UART_17158_POLL_ADDR_OFFSET); - - jsm_printk(INTR, INFO, &brd->pci_dev, - "%s:%d uart_poll: %x\n", __FILE__, __LINE__, uart_poll); - - if (!uart_poll) { - jsm_printk(INTR, INFO, &brd->pci_dev, - "Kernel interrupted to me, but no pending interrupts...\n"); - spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); - return IRQ_NONE; - } - - /* At this point, we have at least SOMETHING to service, dig further... */ - - current_port = 0; - - /* Loop on each port */ - while (((uart_poll & 0xff) != 0) && (outofloop_count < 0xff)){ - - tmp = uart_poll; - outofloop_count++; - - /* Check current port to see if it has interrupt pending */ - if ((tmp & jsm_offset_table[current_port]) != 0) { - port = current_port; - type = tmp >> (8 + (port * 3)); - type &= 0x7; - } else { - current_port++; - continue; - } - - jsm_printk(INTR, INFO, &brd->pci_dev, - "%s:%d port: %x type: %x\n", __FILE__, __LINE__, port, type); - - /* Remove this port + type from uart_poll */ - uart_poll &= ~(jsm_offset_table[port]); - - if (!type) { - /* If no type, just ignore it, and move onto next port */ - jsm_printk(INTR, ERR, &brd->pci_dev, - "Interrupt with no type! port: %d\n", port); - continue; - } - - /* Switch on type of interrupt we have */ - switch (type) { - - case UART_17158_RXRDY_TIMEOUT: - /* - * RXRDY Time-out is cleared by reading data in the - * RX FIFO until it falls below the trigger level. - */ - - /* Verify the port is in range. */ - if (port > brd->nasync) - continue; - - ch = brd->channels[port]; - neo_copy_data_from_uart_to_queue(ch); - - /* Call our tty layer to enforce queue flow control if needed. */ - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - jsm_check_queue_flow_control(ch); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - - continue; - - case UART_17158_RX_LINE_STATUS: - /* - * RXRDY and RX LINE Status (logic OR of LSR[4:1]) - */ - neo_parse_lsr(brd, port); - continue; - - case UART_17158_TXRDY: - /* - * TXRDY interrupt clears after reading ISR register for the UART channel. - */ - - /* - * Yes, this is odd... - * Why would I check EVERY possibility of type of - * interrupt, when we know its TXRDY??? - * Becuz for some reason, even tho we got triggered for TXRDY, - * it seems to be occassionally wrong. Instead of TX, which - * it should be, I was getting things like RXDY too. Weird. - */ - neo_parse_isr(brd, port); - continue; - - case UART_17158_MSR: - /* - * MSR or flow control was seen. - */ - neo_parse_isr(brd, port); - continue; - - default: - /* - * The UART triggered us with a bogus interrupt type. - * It appears the Exar chip, when REALLY bogged down, will throw - * these once and awhile. - * Its harmless, just ignore it and move on. - */ - jsm_printk(INTR, ERR, &brd->pci_dev, - "%s:%d Unknown Interrupt type: %x\n", __FILE__, __LINE__, type); - continue; - } - } - - spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); - - jsm_printk(INTR, INFO, &brd->pci_dev, "finish.\n"); - return IRQ_HANDLED; -} - -/* - * Neo specific way of turning off the receiver. - * Used as a way to enforce queue flow control when in - * hardware flow control mode. - */ -static void neo_disable_receiver(struct jsm_channel *ch) -{ - u8 tmp = readb(&ch->ch_neo_uart->ier); - tmp &= ~(UART_IER_RDI); - writeb(tmp, &ch->ch_neo_uart->ier); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); -} - - -/* - * Neo specific way of turning on the receiver. - * Used as a way to un-enforce queue flow control when in - * hardware flow control mode. - */ -static void neo_enable_receiver(struct jsm_channel *ch) -{ - u8 tmp = readb(&ch->ch_neo_uart->ier); - tmp |= (UART_IER_RDI); - writeb(tmp, &ch->ch_neo_uart->ier); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); -} - -static void neo_send_start_character(struct jsm_channel *ch) -{ - if (!ch) - return; - - if (ch->ch_startc != __DISABLED_CHAR) { - ch->ch_xon_sends++; - writeb(ch->ch_startc, &ch->ch_neo_uart->txrx); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); - } -} - -static void neo_send_stop_character(struct jsm_channel *ch) -{ - if (!ch) - return; - - if (ch->ch_stopc != __DISABLED_CHAR) { - ch->ch_xoff_sends++; - writeb(ch->ch_stopc, &ch->ch_neo_uart->txrx); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); - } -} - -/* - * neo_uart_init - */ -static void neo_uart_init(struct jsm_channel *ch) -{ - writeb(0, &ch->ch_neo_uart->ier); - writeb(0, &ch->ch_neo_uart->efr); - writeb(UART_EFR_ECB, &ch->ch_neo_uart->efr); - - /* Clear out UART and FIFO */ - readb(&ch->ch_neo_uart->txrx); - writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr); - readb(&ch->ch_neo_uart->lsr); - readb(&ch->ch_neo_uart->msr); - - ch->ch_flags |= CH_FIFO_ENABLED; - - /* Assert any signals we want up */ - writeb(ch->ch_mostat, &ch->ch_neo_uart->mcr); -} - -/* - * Make the UART completely turn off. - */ -static void neo_uart_off(struct jsm_channel *ch) -{ - /* Turn off UART enhanced bits */ - writeb(0, &ch->ch_neo_uart->efr); - - /* Stop all interrupts from occurring. */ - writeb(0, &ch->ch_neo_uart->ier); -} - -static u32 neo_get_uart_bytes_left(struct jsm_channel *ch) -{ - u8 left = 0; - u8 lsr = readb(&ch->ch_neo_uart->lsr); - - /* We must cache the LSR as some of the bits get reset once read... */ - ch->ch_cached_lsr |= lsr; - - /* Determine whether the Transmitter is empty or not */ - if (!(lsr & UART_LSR_TEMT)) - left = 1; - else { - ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); - left = 0; - } - - return left; -} - -/* Channel lock MUST be held by the calling function! */ -static void neo_send_break(struct jsm_channel *ch) -{ - /* - * Set the time we should stop sending the break. - * If we are already sending a break, toss away the existing - * time to stop, and use this new value instead. - */ - - /* Tell the UART to start sending the break */ - if (!(ch->ch_flags & CH_BREAK_SENDING)) { - u8 temp = readb(&ch->ch_neo_uart->lcr); - writeb((temp | UART_LCR_SBC), &ch->ch_neo_uart->lcr); - ch->ch_flags |= (CH_BREAK_SENDING); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); - } -} - -/* - * neo_send_immediate_char. - * - * Sends a specific character as soon as possible to the UART, - * jumping over any bytes that might be in the write queue. - * - * The channel lock MUST be held by the calling function. - */ -static void neo_send_immediate_char(struct jsm_channel *ch, unsigned char c) -{ - if (!ch) - return; - - writeb(c, &ch->ch_neo_uart->txrx); - - /* flush write operation */ - neo_pci_posting_flush(ch->ch_bd); -} - -struct board_ops jsm_neo_ops = { - .intr = neo_intr, - .uart_init = neo_uart_init, - .uart_off = neo_uart_off, - .param = neo_param, - .assert_modem_signals = neo_assert_modem_signals, - .flush_uart_write = neo_flush_uart_write, - .flush_uart_read = neo_flush_uart_read, - .disable_receiver = neo_disable_receiver, - .enable_receiver = neo_enable_receiver, - .send_break = neo_send_break, - .clear_break = neo_clear_break, - .send_start_character = neo_send_start_character, - .send_stop_character = neo_send_stop_character, - .copy_data_from_queue_to_uart = neo_copy_data_from_queue_to_uart, - .get_uart_bytes_left = neo_get_uart_bytes_left, - .send_immediate_char = neo_send_immediate_char -}; diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c deleted file mode 100644 index 7a4a914ecff0..000000000000 --- a/drivers/serial/jsm/jsm_tty.c +++ /dev/null @@ -1,910 +0,0 @@ -/************************************************************************ - * Copyright 2003 Digi International (www.digi.com) - * - * Copyright (C) 2004 IBM Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, - * MA 02111-1307, USA. - * - * Contact Information: - * Scott H Kilau - * Ananda Venkatarman - * Modifications: - * 01/19/06: changed jsm_input routine to use the dynamically allocated - * tty_buffer changes. Contributors: Scott Kilau and Ananda V. - ***********************************************************************/ -#include -#include -#include -#include /* For udelay */ -#include -#include - -#include "jsm.h" - -static DECLARE_BITMAP(linemap, MAXLINES); - -static void jsm_carrier(struct jsm_channel *ch); - -static inline int jsm_get_mstat(struct jsm_channel *ch) -{ - unsigned char mstat; - unsigned result; - - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "start\n"); - - mstat = (ch->ch_mostat | ch->ch_mistat); - - result = 0; - - if (mstat & UART_MCR_DTR) - result |= TIOCM_DTR; - if (mstat & UART_MCR_RTS) - result |= TIOCM_RTS; - if (mstat & UART_MSR_CTS) - result |= TIOCM_CTS; - if (mstat & UART_MSR_DSR) - result |= TIOCM_DSR; - if (mstat & UART_MSR_RI) - result |= TIOCM_RI; - if (mstat & UART_MSR_DCD) - result |= TIOCM_CD; - - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n"); - return result; -} - -static unsigned int jsm_tty_tx_empty(struct uart_port *port) -{ - return TIOCSER_TEMT; -} - -/* - * Return modem signals to ld. - */ -static unsigned int jsm_tty_get_mctrl(struct uart_port *port) -{ - int result; - struct jsm_channel *channel = (struct jsm_channel *)port; - - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); - - result = jsm_get_mstat(channel); - - if (result < 0) - return -ENXIO; - - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); - - return result; -} - -/* - * jsm_set_modem_info() - * - * Set modem signals, called by ld. - */ -static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct jsm_channel *channel = (struct jsm_channel *)port; - - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); - - if (mctrl & TIOCM_RTS) - channel->ch_mostat |= UART_MCR_RTS; - else - channel->ch_mostat &= ~UART_MCR_RTS; - - if (mctrl & TIOCM_DTR) - channel->ch_mostat |= UART_MCR_DTR; - else - channel->ch_mostat &= ~UART_MCR_DTR; - - channel->ch_bd->bd_ops->assert_modem_signals(channel); - - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); - udelay(10); -} - -static void jsm_tty_start_tx(struct uart_port *port) -{ - struct jsm_channel *channel = (struct jsm_channel *)port; - - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); - - channel->ch_flags &= ~(CH_STOP); - jsm_tty_write(port); - - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); -} - -static void jsm_tty_stop_tx(struct uart_port *port) -{ - struct jsm_channel *channel = (struct jsm_channel *)port; - - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); - - channel->ch_flags |= (CH_STOP); - - jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); -} - -static void jsm_tty_send_xchar(struct uart_port *port, char ch) -{ - unsigned long lock_flags; - struct jsm_channel *channel = (struct jsm_channel *)port; - struct ktermios *termios; - - spin_lock_irqsave(&port->lock, lock_flags); - termios = port->state->port.tty->termios; - if (ch == termios->c_cc[VSTART]) - channel->ch_bd->bd_ops->send_start_character(channel); - - if (ch == termios->c_cc[VSTOP]) - channel->ch_bd->bd_ops->send_stop_character(channel); - spin_unlock_irqrestore(&port->lock, lock_flags); -} - -static void jsm_tty_stop_rx(struct uart_port *port) -{ - struct jsm_channel *channel = (struct jsm_channel *)port; - - channel->ch_bd->bd_ops->disable_receiver(channel); -} - -static void jsm_tty_enable_ms(struct uart_port *port) -{ - /* Nothing needed */ -} - -static void jsm_tty_break(struct uart_port *port, int break_state) -{ - unsigned long lock_flags; - struct jsm_channel *channel = (struct jsm_channel *)port; - - spin_lock_irqsave(&port->lock, lock_flags); - if (break_state == -1) - channel->ch_bd->bd_ops->send_break(channel); - else - channel->ch_bd->bd_ops->clear_break(channel, 0); - - spin_unlock_irqrestore(&port->lock, lock_flags); -} - -static int jsm_tty_open(struct uart_port *port) -{ - struct jsm_board *brd; - struct jsm_channel *channel = (struct jsm_channel *)port; - struct ktermios *termios; - - /* Get board pointer from our array of majors we have allocated */ - brd = channel->ch_bd; - - /* - * Allocate channel buffers for read/write/error. - * Set flag, so we don't get trounced on. - */ - channel->ch_flags |= (CH_OPENING); - - /* Drop locks, as malloc with GFP_KERNEL can sleep */ - - if (!channel->ch_rqueue) { - channel->ch_rqueue = kzalloc(RQUEUESIZE, GFP_KERNEL); - if (!channel->ch_rqueue) { - jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, - "unable to allocate read queue buf"); - return -ENOMEM; - } - } - if (!channel->ch_equeue) { - channel->ch_equeue = kzalloc(EQUEUESIZE, GFP_KERNEL); - if (!channel->ch_equeue) { - jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, - "unable to allocate error queue buf"); - return -ENOMEM; - } - } - if (!channel->ch_wqueue) { - channel->ch_wqueue = kzalloc(WQUEUESIZE, GFP_KERNEL); - if (!channel->ch_wqueue) { - jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, - "unable to allocate write queue buf"); - return -ENOMEM; - } - } - - channel->ch_flags &= ~(CH_OPENING); - /* - * Initialize if neither terminal is open. - */ - jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, - "jsm_open: initializing channel in open...\n"); - - /* - * Flush input queues. - */ - channel->ch_r_head = channel->ch_r_tail = 0; - channel->ch_e_head = channel->ch_e_tail = 0; - channel->ch_w_head = channel->ch_w_tail = 0; - - brd->bd_ops->flush_uart_write(channel); - brd->bd_ops->flush_uart_read(channel); - - channel->ch_flags = 0; - channel->ch_cached_lsr = 0; - channel->ch_stops_sent = 0; - - termios = port->state->port.tty->termios; - channel->ch_c_cflag = termios->c_cflag; - channel->ch_c_iflag = termios->c_iflag; - channel->ch_c_oflag = termios->c_oflag; - channel->ch_c_lflag = termios->c_lflag; - channel->ch_startc = termios->c_cc[VSTART]; - channel->ch_stopc = termios->c_cc[VSTOP]; - - /* Tell UART to init itself */ - brd->bd_ops->uart_init(channel); - - /* - * Run param in case we changed anything - */ - brd->bd_ops->param(channel); - - jsm_carrier(channel); - - channel->ch_open_count++; - - jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, "finish\n"); - return 0; -} - -static void jsm_tty_close(struct uart_port *port) -{ - struct jsm_board *bd; - struct ktermios *ts; - struct jsm_channel *channel = (struct jsm_channel *)port; - - jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n"); - - bd = channel->ch_bd; - ts = port->state->port.tty->termios; - - channel->ch_flags &= ~(CH_STOPI); - - channel->ch_open_count--; - - /* - * If we have HUPCL set, lower DTR and RTS - */ - if (channel->ch_c_cflag & HUPCL) { - jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, - "Close. HUPCL set, dropping DTR/RTS\n"); - - /* Drop RTS/DTR */ - channel->ch_mostat &= ~(UART_MCR_DTR | UART_MCR_RTS); - bd->bd_ops->assert_modem_signals(channel); - } - - /* Turn off UART interrupts for this port */ - channel->ch_bd->bd_ops->uart_off(channel); - - jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "finish\n"); -} - -static void jsm_tty_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old_termios) -{ - unsigned long lock_flags; - struct jsm_channel *channel = (struct jsm_channel *)port; - - spin_lock_irqsave(&port->lock, lock_flags); - channel->ch_c_cflag = termios->c_cflag; - channel->ch_c_iflag = termios->c_iflag; - channel->ch_c_oflag = termios->c_oflag; - channel->ch_c_lflag = termios->c_lflag; - channel->ch_startc = termios->c_cc[VSTART]; - channel->ch_stopc = termios->c_cc[VSTOP]; - - channel->ch_bd->bd_ops->param(channel); - jsm_carrier(channel); - spin_unlock_irqrestore(&port->lock, lock_flags); -} - -static const char *jsm_tty_type(struct uart_port *port) -{ - return "jsm"; -} - -static void jsm_tty_release_port(struct uart_port *port) -{ -} - -static int jsm_tty_request_port(struct uart_port *port) -{ - return 0; -} - -static void jsm_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_JSM; -} - -static struct uart_ops jsm_ops = { - .tx_empty = jsm_tty_tx_empty, - .set_mctrl = jsm_tty_set_mctrl, - .get_mctrl = jsm_tty_get_mctrl, - .stop_tx = jsm_tty_stop_tx, - .start_tx = jsm_tty_start_tx, - .send_xchar = jsm_tty_send_xchar, - .stop_rx = jsm_tty_stop_rx, - .enable_ms = jsm_tty_enable_ms, - .break_ctl = jsm_tty_break, - .startup = jsm_tty_open, - .shutdown = jsm_tty_close, - .set_termios = jsm_tty_set_termios, - .type = jsm_tty_type, - .release_port = jsm_tty_release_port, - .request_port = jsm_tty_request_port, - .config_port = jsm_config_port, -}; - -/* - * jsm_tty_init() - * - * Init the tty subsystem. Called once per board after board has been - * downloaded and init'ed. - */ -int __devinit jsm_tty_init(struct jsm_board *brd) -{ - int i; - void __iomem *vaddr; - struct jsm_channel *ch; - - if (!brd) - return -ENXIO; - - jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); - - /* - * Initialize board structure elements. - */ - - brd->nasync = brd->maxports; - - /* - * Allocate channel memory that might not have been allocated - * when the driver was first loaded. - */ - for (i = 0; i < brd->nasync; i++) { - if (!brd->channels[i]) { - - /* - * Okay to malloc with GFP_KERNEL, we are not at - * interrupt context, and there are no locks held. - */ - brd->channels[i] = kzalloc(sizeof(struct jsm_channel), GFP_KERNEL); - if (!brd->channels[i]) { - jsm_printk(CORE, ERR, &brd->pci_dev, - "%s:%d Unable to allocate memory for channel struct\n", - __FILE__, __LINE__); - } - } - } - - ch = brd->channels[0]; - vaddr = brd->re_map_membase; - - /* Set up channel variables */ - for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) { - - if (!brd->channels[i]) - continue; - - spin_lock_init(&ch->ch_lock); - - if (brd->bd_uart_offset == 0x200) - ch->ch_neo_uart = vaddr + (brd->bd_uart_offset * i); - - ch->ch_bd = brd; - ch->ch_portnum = i; - - /* .25 second delay */ - ch->ch_close_delay = 250; - - init_waitqueue_head(&ch->ch_flags_wait); - } - - jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); - return 0; -} - -int jsm_uart_port_init(struct jsm_board *brd) -{ - int i, rc; - unsigned int line; - struct jsm_channel *ch; - - if (!brd) - return -ENXIO; - - jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); - - /* - * Initialize board structure elements. - */ - - brd->nasync = brd->maxports; - - /* Set up channel variables */ - for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) { - - if (!brd->channels[i]) - continue; - - brd->channels[i]->uart_port.irq = brd->irq; - brd->channels[i]->uart_port.uartclk = 14745600; - brd->channels[i]->uart_port.type = PORT_JSM; - brd->channels[i]->uart_port.iotype = UPIO_MEM; - brd->channels[i]->uart_port.membase = brd->re_map_membase; - brd->channels[i]->uart_port.fifosize = 16; - brd->channels[i]->uart_port.ops = &jsm_ops; - line = find_first_zero_bit(linemap, MAXLINES); - if (line >= MAXLINES) { - printk(KERN_INFO "jsm: linemap is full, added device failed\n"); - continue; - } else - set_bit(line, linemap); - brd->channels[i]->uart_port.line = line; - rc = uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port); - if (rc){ - printk(KERN_INFO "jsm: Port %d failed. Aborting...\n", i); - return rc; - } - else - printk(KERN_INFO "jsm: Port %d added\n", i); - } - - jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); - return 0; -} - -int jsm_remove_uart_port(struct jsm_board *brd) -{ - int i; - struct jsm_channel *ch; - - if (!brd) - return -ENXIO; - - jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); - - /* - * Initialize board structure elements. - */ - - brd->nasync = brd->maxports; - - /* Set up channel variables */ - for (i = 0; i < brd->nasync; i++) { - - if (!brd->channels[i]) - continue; - - ch = brd->channels[i]; - - clear_bit(ch->uart_port.line, linemap); - uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port); - } - - jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); - return 0; -} - -void jsm_input(struct jsm_channel *ch) -{ - struct jsm_board *bd; - struct tty_struct *tp; - u32 rmask; - u16 head; - u16 tail; - int data_len; - unsigned long lock_flags; - int len = 0; - int n = 0; - int s = 0; - int i = 0; - - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n"); - - if (!ch) - return; - - tp = ch->uart_port.state->port.tty; - - bd = ch->ch_bd; - if(!bd) - return; - - spin_lock_irqsave(&ch->ch_lock, lock_flags); - - /* - *Figure the number of characters in the buffer. - *Exit immediately if none. - */ - - rmask = RQUEUEMASK; - - head = ch->ch_r_head & rmask; - tail = ch->ch_r_tail & rmask; - - data_len = (head - tail) & rmask; - if (data_len == 0) { - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - return; - } - - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n"); - - /* - *If the device is not open, or CREAD is off, flush - *input data and return immediately. - */ - if (!tp || - !(tp->termios->c_cflag & CREAD) ) { - - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum); - ch->ch_r_head = tail; - - /* Force queue flow control to be released, if needed */ - jsm_check_queue_flow_control(ch); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - return; - } - - /* - * If we are throttled, simply don't read any data. - */ - if (ch->ch_flags & CH_STOPI) { - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "Port %d throttled, not reading any data. head: %x tail: %x\n", - ch->ch_portnum, head, tail); - return; - } - - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start 2\n"); - - if (data_len <= 0) { - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n"); - return; - } - - len = tty_buffer_request_room(tp, data_len); - n = len; - - /* - * n now contains the most amount of data we can copy, - * bounded either by the flip buffer size or the amount - * of data the card actually has pending... - */ - while (n) { - s = ((head >= tail) ? head : RQUEUESIZE) - tail; - s = min(s, n); - - if (s <= 0) - break; - - /* - * If conditions are such that ld needs to see all - * UART errors, we will have to walk each character - * and error byte and send them to the buffer one at - * a time. - */ - - if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) { - for (i = 0; i < s; i++) { - /* - * Give the Linux ld the flags in the - * format it likes. - */ - if (*(ch->ch_equeue +tail +i) & UART_LSR_BI) - tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_BREAK); - else if (*(ch->ch_equeue +tail +i) & UART_LSR_PE) - tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_PARITY); - else if (*(ch->ch_equeue +tail +i) & UART_LSR_FE) - tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_FRAME); - else - tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_NORMAL); - } - } else { - tty_insert_flip_string(tp, ch->ch_rqueue + tail, s) ; - } - tail += s; - n -= s; - /* Flip queue if needed */ - tail &= rmask; - } - - ch->ch_r_tail = tail & rmask; - ch->ch_e_tail = tail & rmask; - jsm_check_queue_flow_control(ch); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - /* Tell the tty layer its okay to "eat" the data now */ - tty_flip_buffer_push(tp); - - jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n"); -} - -static void jsm_carrier(struct jsm_channel *ch) -{ - struct jsm_board *bd; - - int virt_carrier = 0; - int phys_carrier = 0; - - jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, "start\n"); - if (!ch) - return; - - bd = ch->ch_bd; - - if (!bd) - return; - - if (ch->ch_mistat & UART_MSR_DCD) { - jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, - "mistat: %x D_CD: %x\n", ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD); - phys_carrier = 1; - } - - if (ch->ch_c_cflag & CLOCAL) - virt_carrier = 1; - - jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, - "DCD: physical: %d virt: %d\n", phys_carrier, virt_carrier); - - /* - * Test for a VIRTUAL carrier transition to HIGH. - */ - if (((ch->ch_flags & CH_FCAR) == 0) && (virt_carrier == 1)) { - - /* - * When carrier rises, wake any threads waiting - * for carrier in the open routine. - */ - - jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, - "carrier: virt DCD rose\n"); - - if (waitqueue_active(&(ch->ch_flags_wait))) - wake_up_interruptible(&ch->ch_flags_wait); - } - - /* - * Test for a PHYSICAL carrier transition to HIGH. - */ - if (((ch->ch_flags & CH_CD) == 0) && (phys_carrier == 1)) { - - /* - * When carrier rises, wake any threads waiting - * for carrier in the open routine. - */ - - jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, - "carrier: physical DCD rose\n"); - - if (waitqueue_active(&(ch->ch_flags_wait))) - wake_up_interruptible(&ch->ch_flags_wait); - } - - /* - * Test for a PHYSICAL transition to low, so long as we aren't - * currently ignoring physical transitions (which is what "virtual - * carrier" indicates). - * - * The transition of the virtual carrier to low really doesn't - * matter... it really only means "ignore carrier state", not - * "make pretend that carrier is there". - */ - if ((virt_carrier == 0) && ((ch->ch_flags & CH_CD) != 0) - && (phys_carrier == 0)) { - /* - * When carrier drops: - * - * Drop carrier on all open units. - * - * Flush queues, waking up any task waiting in the - * line discipline. - * - * Send a hangup to the control terminal. - * - * Enable all select calls. - */ - if (waitqueue_active(&(ch->ch_flags_wait))) - wake_up_interruptible(&ch->ch_flags_wait); - } - - /* - * Make sure that our cached values reflect the current reality. - */ - if (virt_carrier == 1) - ch->ch_flags |= CH_FCAR; - else - ch->ch_flags &= ~CH_FCAR; - - if (phys_carrier == 1) - ch->ch_flags |= CH_CD; - else - ch->ch_flags &= ~CH_CD; -} - - -void jsm_check_queue_flow_control(struct jsm_channel *ch) -{ - struct board_ops *bd_ops = ch->ch_bd->bd_ops; - int qleft; - - /* Store how much space we have left in the queue */ - if ((qleft = ch->ch_r_tail - ch->ch_r_head - 1) < 0) - qleft += RQUEUEMASK + 1; - - /* - * Check to see if we should enforce flow control on our queue because - * the ld (or user) isn't reading data out of our queue fast enuf. - * - * NOTE: This is done based on what the current flow control of the - * port is set for. - * - * 1) HWFLOW (RTS) - Turn off the UART's Receive interrupt. - * This will cause the UART's FIFO to back up, and force - * the RTS signal to be dropped. - * 2) SWFLOW (IXOFF) - Keep trying to send a stop character to - * the other side, in hopes it will stop sending data to us. - * 3) NONE - Nothing we can do. We will simply drop any extra data - * that gets sent into us when the queue fills up. - */ - if (qleft < 256) { - /* HWFLOW */ - if (ch->ch_c_cflag & CRTSCTS) { - if(!(ch->ch_flags & CH_RECEIVER_OFF)) { - bd_ops->disable_receiver(ch); - ch->ch_flags |= (CH_RECEIVER_OFF); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "Internal queue hit hilevel mark (%d)! Turning off interrupts.\n", - qleft); - } - } - /* SWFLOW */ - else if (ch->ch_c_iflag & IXOFF) { - if (ch->ch_stops_sent <= MAX_STOPS_SENT) { - bd_ops->send_stop_character(ch); - ch->ch_stops_sent++; - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "Sending stop char! Times sent: %x\n", ch->ch_stops_sent); - } - } - } - - /* - * Check to see if we should unenforce flow control because - * ld (or user) finally read enuf data out of our queue. - * - * NOTE: This is done based on what the current flow control of the - * port is set for. - * - * 1) HWFLOW (RTS) - Turn back on the UART's Receive interrupt. - * This will cause the UART's FIFO to raise RTS back up, - * which will allow the other side to start sending data again. - * 2) SWFLOW (IXOFF) - Send a start character to - * the other side, so it will start sending data to us again. - * 3) NONE - Do nothing. Since we didn't do anything to turn off the - * other side, we don't need to do anything now. - */ - if (qleft > (RQUEUESIZE / 2)) { - /* HWFLOW */ - if (ch->ch_c_cflag & CRTSCTS) { - if (ch->ch_flags & CH_RECEIVER_OFF) { - bd_ops->enable_receiver(ch); - ch->ch_flags &= ~(CH_RECEIVER_OFF); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, - "Internal queue hit lowlevel mark (%d)! Turning on interrupts.\n", - qleft); - } - } - /* SWFLOW */ - else if (ch->ch_c_iflag & IXOFF && ch->ch_stops_sent) { - ch->ch_stops_sent = 0; - bd_ops->send_start_character(ch); - jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "Sending start char!\n"); - } - } -} - -/* - * jsm_tty_write() - * - * Take data from the user or kernel and send it out to the FEP. - * In here exists all the Transparent Print magic as well. - */ -int jsm_tty_write(struct uart_port *port) -{ - int bufcount; - int data_count = 0,data_count1 =0; - u16 head; - u16 tail; - u16 tmask; - u32 remain; - int temp_tail = port->state->xmit.tail; - struct jsm_channel *channel = (struct jsm_channel *)port; - - tmask = WQUEUEMASK; - head = (channel->ch_w_head) & tmask; - tail = (channel->ch_w_tail) & tmask; - - if ((bufcount = tail - head - 1) < 0) - bufcount += WQUEUESIZE; - - bufcount = min(bufcount, 56); - remain = WQUEUESIZE - head; - - data_count = 0; - if (bufcount >= remain) { - bufcount -= remain; - while ((port->state->xmit.head != temp_tail) && - (data_count < remain)) { - channel->ch_wqueue[head++] = - port->state->xmit.buf[temp_tail]; - - temp_tail++; - temp_tail &= (UART_XMIT_SIZE - 1); - data_count++; - } - if (data_count == remain) head = 0; - } - - data_count1 = 0; - if (bufcount > 0) { - remain = bufcount; - while ((port->state->xmit.head != temp_tail) && - (data_count1 < remain)) { - channel->ch_wqueue[head++] = - port->state->xmit.buf[temp_tail]; - - temp_tail++; - temp_tail &= (UART_XMIT_SIZE - 1); - data_count1++; - - } - } - - port->state->xmit.tail = temp_tail; - - data_count += data_count1; - if (data_count) { - head &= tmask; - channel->ch_w_head = head; - } - - if (data_count) { - channel->ch_bd->bd_ops->copy_data_from_queue_to_uart(channel); - } - - return data_count; -} diff --git a/drivers/serial/kgdboc.c b/drivers/serial/kgdboc.c deleted file mode 100644 index 25a8bc565f40..000000000000 --- a/drivers/serial/kgdboc.c +++ /dev/null @@ -1,328 +0,0 @@ -/* - * Based on the same principle as kgdboe using the NETPOLL api, this - * driver uses a console polling api to implement a gdb serial inteface - * which is multiplexed on a console port. - * - * Maintainer: Jason Wessel - * - * 2007-2008 (c) Jason Wessel - Wind River Systems, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#define MAX_CONFIG_LEN 40 - -static struct kgdb_io kgdboc_io_ops; - -/* -1 = init not run yet, 0 = unconfigured, 1 = configured. */ -static int configured = -1; - -static char config[MAX_CONFIG_LEN]; -static struct kparam_string kps = { - .string = config, - .maxlen = MAX_CONFIG_LEN, -}; - -static int kgdboc_use_kms; /* 1 if we use kernel mode switching */ -static struct tty_driver *kgdb_tty_driver; -static int kgdb_tty_line; - -#ifdef CONFIG_KDB_KEYBOARD -static int kgdboc_reset_connect(struct input_handler *handler, - struct input_dev *dev, - const struct input_device_id *id) -{ - input_reset_device(dev); - - /* Retrun an error - we do not want to bind, just to reset */ - return -ENODEV; -} - -static void kgdboc_reset_disconnect(struct input_handle *handle) -{ - /* We do not expect anyone to actually bind to us */ - BUG(); -} - -static const struct input_device_id kgdboc_reset_ids[] = { - { - .flags = INPUT_DEVICE_ID_MATCH_EVBIT, - .evbit = { BIT_MASK(EV_KEY) }, - }, - { } -}; - -static struct input_handler kgdboc_reset_handler = { - .connect = kgdboc_reset_connect, - .disconnect = kgdboc_reset_disconnect, - .name = "kgdboc_reset", - .id_table = kgdboc_reset_ids, -}; - -static DEFINE_MUTEX(kgdboc_reset_mutex); - -static void kgdboc_restore_input_helper(struct work_struct *dummy) -{ - /* - * We need to take a mutex to prevent several instances of - * this work running on different CPUs so they don't try - * to register again already registered handler. - */ - mutex_lock(&kgdboc_reset_mutex); - - if (input_register_handler(&kgdboc_reset_handler) == 0) - input_unregister_handler(&kgdboc_reset_handler); - - mutex_unlock(&kgdboc_reset_mutex); -} - -static DECLARE_WORK(kgdboc_restore_input_work, kgdboc_restore_input_helper); - -static void kgdboc_restore_input(void) -{ - if (likely(system_state == SYSTEM_RUNNING)) - schedule_work(&kgdboc_restore_input_work); -} - -static int kgdboc_register_kbd(char **cptr) -{ - if (strncmp(*cptr, "kbd", 3) == 0) { - if (kdb_poll_idx < KDB_POLL_FUNC_MAX) { - kdb_poll_funcs[kdb_poll_idx] = kdb_get_kbd_char; - kdb_poll_idx++; - if (cptr[0][3] == ',') - *cptr += 4; - else - return 1; - } - } - return 0; -} - -static void kgdboc_unregister_kbd(void) -{ - int i; - - for (i = 0; i < kdb_poll_idx; i++) { - if (kdb_poll_funcs[i] == kdb_get_kbd_char) { - kdb_poll_idx--; - kdb_poll_funcs[i] = kdb_poll_funcs[kdb_poll_idx]; - kdb_poll_funcs[kdb_poll_idx] = NULL; - i--; - } - } - flush_work_sync(&kgdboc_restore_input_work); -} -#else /* ! CONFIG_KDB_KEYBOARD */ -#define kgdboc_register_kbd(x) 0 -#define kgdboc_unregister_kbd() -#define kgdboc_restore_input() -#endif /* ! CONFIG_KDB_KEYBOARD */ - -static int kgdboc_option_setup(char *opt) -{ - if (strlen(opt) > MAX_CONFIG_LEN) { - printk(KERN_ERR "kgdboc: config string too long\n"); - return -ENOSPC; - } - strcpy(config, opt); - - return 0; -} - -__setup("kgdboc=", kgdboc_option_setup); - -static void cleanup_kgdboc(void) -{ - kgdboc_unregister_kbd(); - if (configured == 1) - kgdb_unregister_io_module(&kgdboc_io_ops); -} - -static int configure_kgdboc(void) -{ - struct tty_driver *p; - int tty_line = 0; - int err; - char *cptr = config; - struct console *cons; - - err = kgdboc_option_setup(config); - if (err || !strlen(config) || isspace(config[0])) - goto noconfig; - - err = -ENODEV; - kgdboc_io_ops.is_console = 0; - kgdb_tty_driver = NULL; - - kgdboc_use_kms = 0; - if (strncmp(cptr, "kms,", 4) == 0) { - cptr += 4; - kgdboc_use_kms = 1; - } - - if (kgdboc_register_kbd(&cptr)) - goto do_register; - - p = tty_find_polling_driver(cptr, &tty_line); - if (!p) - goto noconfig; - - cons = console_drivers; - while (cons) { - int idx; - if (cons->device && cons->device(cons, &idx) == p && - idx == tty_line) { - kgdboc_io_ops.is_console = 1; - break; - } - cons = cons->next; - } - - kgdb_tty_driver = p; - kgdb_tty_line = tty_line; - -do_register: - err = kgdb_register_io_module(&kgdboc_io_ops); - if (err) - goto noconfig; - - configured = 1; - - return 0; - -noconfig: - config[0] = 0; - configured = 0; - cleanup_kgdboc(); - - return err; -} - -static int __init init_kgdboc(void) -{ - /* Already configured? */ - if (configured == 1) - return 0; - - return configure_kgdboc(); -} - -static int kgdboc_get_char(void) -{ - if (!kgdb_tty_driver) - return -1; - return kgdb_tty_driver->ops->poll_get_char(kgdb_tty_driver, - kgdb_tty_line); -} - -static void kgdboc_put_char(u8 chr) -{ - if (!kgdb_tty_driver) - return; - kgdb_tty_driver->ops->poll_put_char(kgdb_tty_driver, - kgdb_tty_line, chr); -} - -static int param_set_kgdboc_var(const char *kmessage, struct kernel_param *kp) -{ - int len = strlen(kmessage); - - if (len >= MAX_CONFIG_LEN) { - printk(KERN_ERR "kgdboc: config string too long\n"); - return -ENOSPC; - } - - /* Only copy in the string if the init function has not run yet */ - if (configured < 0) { - strcpy(config, kmessage); - return 0; - } - - if (kgdb_connected) { - printk(KERN_ERR - "kgdboc: Cannot reconfigure while KGDB is connected.\n"); - - return -EBUSY; - } - - strcpy(config, kmessage); - /* Chop out \n char as a result of echo */ - if (config[len - 1] == '\n') - config[len - 1] = '\0'; - - if (configured == 1) - cleanup_kgdboc(); - - /* Go and configure with the new params. */ - return configure_kgdboc(); -} - -static int dbg_restore_graphics; - -static void kgdboc_pre_exp_handler(void) -{ - if (!dbg_restore_graphics && kgdboc_use_kms) { - dbg_restore_graphics = 1; - con_debug_enter(vc_cons[fg_console].d); - } - /* Increment the module count when the debugger is active */ - if (!kgdb_connected) - try_module_get(THIS_MODULE); -} - -static void kgdboc_post_exp_handler(void) -{ - /* decrement the module count when the debugger detaches */ - if (!kgdb_connected) - module_put(THIS_MODULE); - if (kgdboc_use_kms && dbg_restore_graphics) { - dbg_restore_graphics = 0; - con_debug_leave(); - } - kgdboc_restore_input(); -} - -static struct kgdb_io kgdboc_io_ops = { - .name = "kgdboc", - .read_char = kgdboc_get_char, - .write_char = kgdboc_put_char, - .pre_exception = kgdboc_pre_exp_handler, - .post_exception = kgdboc_post_exp_handler, -}; - -#ifdef CONFIG_KGDB_SERIAL_CONSOLE -/* This is only available if kgdboc is a built in for early debugging */ -static int __init kgdboc_early_init(char *opt) -{ - /* save the first character of the config string because the - * init routine can destroy it. - */ - char save_ch; - - kgdboc_option_setup(opt); - save_ch = config[0]; - init_kgdboc(); - config[0] = save_ch; - return 0; -} - -early_param("ekgdboc", kgdboc_early_init); -#endif /* CONFIG_KGDB_SERIAL_CONSOLE */ - -module_init(init_kgdboc); -module_exit(cleanup_kgdboc); -module_param_call(kgdboc, param_set_kgdboc_var, param_get_string, &kps, 0644); -MODULE_PARM_DESC(kgdboc, "[,baud]"); -MODULE_DESCRIPTION("KGDB Console TTY Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c deleted file mode 100644 index bea5c215460c..000000000000 --- a/drivers/serial/m32r_sio.c +++ /dev/null @@ -1,1192 +0,0 @@ -/* - * m32r_sio.c - * - * Driver for M32R serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * Based on drivers/serial/8250.c. - * - * Copyright (C) 2001 Russell King. - * Copyright (C) 2004 Hirokazu Takata - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -/* - * A note about mapbase / membase - * - * mapbase is the physical address of the IO port. Currently, we don't - * support this very well, and it may well be dropped from this driver - * in future. As such, mapbase should be NULL. - * - * membase is an 'ioremapped' cookie. This is compatible with the old - * serial.c driver, and is currently the preferred form. - */ - -#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define PORT_M32R_BASE PORT_M32R_SIO -#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1) -#define BAUD_RATE 115200 - -#include -#include "m32r_sio.h" -#include "m32r_sio_reg.h" - -/* - * Debugging. - */ -#if 0 -#define DEBUG_AUTOCONF(fmt...) printk(fmt) -#else -#define DEBUG_AUTOCONF(fmt...) do { } while (0) -#endif - -#if 0 -#define DEBUG_INTR(fmt...) printk(fmt) -#else -#define DEBUG_INTR(fmt...) do { } while (0) -#endif - -#define PASS_LIMIT 256 - -/* - * We default to IRQ0 for the "no irq" hack. Some - * machine types want others as well - they're free - * to redefine this in their header file. - */ -#define is_real_interrupt(irq) ((irq) != 0) - -#define BASE_BAUD 115200 - -/* Standard COM flags */ -#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST) - -/* - * SERIAL_PORT_DFNS tells us about built-in ports that have no - * standard enumeration mechanism. Platforms that can find all - * serial ports via mechanisms like ACPI or PCI need not supply it. - */ -#if defined(CONFIG_PLAT_USRV) - -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */ - -#else /* !CONFIG_PLAT_USRV */ - -#if defined(CONFIG_SERIAL_M32R_PLDSIO) -#define SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \ - STD_COM_FLAGS }, /* ttyS0 */ -#else -#define SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \ - STD_COM_FLAGS }, /* ttyS0 */ -#endif - -#endif /* !CONFIG_PLAT_USRV */ - -static struct old_serial_port old_serial_port[] = { - SERIAL_PORT_DFNS -}; - -#define UART_NR ARRAY_SIZE(old_serial_port) - -struct uart_sio_port { - struct uart_port port; - struct timer_list timer; /* "no irq" timer */ - struct list_head list; /* ports on this IRQ */ - unsigned short rev; - unsigned char acr; - unsigned char ier; - unsigned char lcr; - unsigned char mcr_mask; /* mask of user bits */ - unsigned char mcr_force; /* mask of forced bits */ - unsigned char lsr_break_flag; - - /* - * We provide a per-port pm hook. - */ - void (*pm)(struct uart_port *port, - unsigned int state, unsigned int old); -}; - -struct irq_info { - spinlock_t lock; - struct list_head *head; -}; - -static struct irq_info irq_lists[NR_IRQS]; - -/* - * Here we define the default xmit fifo size used for each type of UART. - */ -static const struct serial_uart_config uart_config[] = { - [PORT_UNKNOWN] = { - .name = "unknown", - .dfl_xmit_fifo_size = 1, - .flags = 0, - }, - [PORT_INDEX(PORT_M32R_SIO)] = { - .name = "M32RSIO", - .dfl_xmit_fifo_size = 1, - .flags = 0, - }, -}; - -#ifdef CONFIG_SERIAL_M32R_PLDSIO - -#define __sio_in(x) inw((unsigned long)(x)) -#define __sio_out(v,x) outw((v),(unsigned long)(x)) - -static inline void sio_set_baud_rate(unsigned long baud) -{ - unsigned short sbaud; - sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1; - __sio_out(sbaud, PLD_ESIO0BAUR); -} - -static void sio_reset(void) -{ - unsigned short tmp; - - tmp = __sio_in(PLD_ESIO0RXB); - tmp = __sio_in(PLD_ESIO0RXB); - tmp = __sio_in(PLD_ESIO0CR); - sio_set_baud_rate(BAUD_RATE); - __sio_out(0x0300, PLD_ESIO0CR); - __sio_out(0x0003, PLD_ESIO0CR); -} - -static void sio_init(void) -{ - unsigned short tmp; - - tmp = __sio_in(PLD_ESIO0RXB); - tmp = __sio_in(PLD_ESIO0RXB); - tmp = __sio_in(PLD_ESIO0CR); - __sio_out(0x0300, PLD_ESIO0CR); - __sio_out(0x0003, PLD_ESIO0CR); -} - -static void sio_error(int *status) -{ - printk("SIO0 error[%04x]\n", *status); - do { - sio_init(); - } while ((*status = __sio_in(PLD_ESIO0CR)) != 3); -} - -#else /* not CONFIG_SERIAL_M32R_PLDSIO */ - -#define __sio_in(x) inl(x) -#define __sio_out(v,x) outl((v),(x)) - -static inline void sio_set_baud_rate(unsigned long baud) -{ - unsigned long i, j; - - i = boot_cpu_data.bus_clock / (baud * 16); - j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud; - i -= 1; - j = (j + 1) >> 1; - - __sio_out(i, M32R_SIO0_BAUR_PORTL); - __sio_out(j, M32R_SIO0_RBAUR_PORTL); -} - -static void sio_reset(void) -{ - __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */ - __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */ - __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */ - sio_set_baud_rate(BAUD_RATE); - __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL); - __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */ -} - -static void sio_init(void) -{ - unsigned int tmp; - - tmp = __sio_in(M32R_SIO0_RXB_PORTL); - tmp = __sio_in(M32R_SIO0_RXB_PORTL); - tmp = __sio_in(M32R_SIO0_STS_PORTL); - __sio_out(0x00000003, M32R_SIO0_CR_PORTL); -} - -static void sio_error(int *status) -{ - printk("SIO0 error[%04x]\n", *status); - do { - sio_init(); - } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3); -} - -#endif /* CONFIG_SERIAL_M32R_PLDSIO */ - -static unsigned int sio_in(struct uart_sio_port *up, int offset) -{ - return __sio_in(up->port.iobase + offset); -} - -static void sio_out(struct uart_sio_port *up, int offset, int value) -{ - __sio_out(value, up->port.iobase + offset); -} - -static unsigned int serial_in(struct uart_sio_port *up, int offset) -{ - if (!offset) - return 0; - - return __sio_in(offset); -} - -static void serial_out(struct uart_sio_port *up, int offset, int value) -{ - if (!offset) - return; - - __sio_out(value, offset); -} - -static void m32r_sio_stop_tx(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - if (up->ier & UART_IER_THRI) { - up->ier &= ~UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -static void m32r_sio_start_tx(struct uart_port *port) -{ -#ifdef CONFIG_SERIAL_M32R_PLDSIO - struct uart_sio_port *up = (struct uart_sio_port *)port; - struct circ_buf *xmit = &up->port.state->xmit; - - if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - } - while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY); -#else - struct uart_sio_port *up = (struct uart_sio_port *)port; - - if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -#endif -} - -static void m32r_sio_stop_rx(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - up->ier &= ~UART_IER_RLSI; - up->port.read_status_mask &= ~UART_LSR_DR; - serial_out(up, UART_IER, up->ier); -} - -static void m32r_sio_enable_ms(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); -} - -static void receive_chars(struct uart_sio_port *up, int *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned char ch; - unsigned char flag; - int max_count = 256; - - do { - ch = sio_in(up, SIORXB); - flag = TTY_NORMAL; - up->port.icount.rx++; - - if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE))) { - /* - * For statistics only - */ - if (*status & UART_LSR_BI) { - *status &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (*status & UART_LSR_PE) - up->port.icount.parity++; - else if (*status & UART_LSR_FE) - up->port.icount.frame++; - if (*status & UART_LSR_OE) - up->port.icount.overrun++; - - /* - * Mask off conditions which should be ingored. - */ - *status &= up->port.read_status_mask; - - if (up->port.line == up->port.cons->index) { - /* Recover the break flag from console xmit */ - *status |= up->lsr_break_flag; - up->lsr_break_flag = 0; - } - - if (*status & UART_LSR_BI) { - DEBUG_INTR("handling break...."); - flag = TTY_BREAK; - } else if (*status & UART_LSR_PE) - flag = TTY_PARITY; - else if (*status & UART_LSR_FE) - flag = TTY_FRAME; - } - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - if ((*status & up->port.ignore_status_mask) == 0) - tty_insert_flip_char(tty, ch, flag); - - if (*status & UART_LSR_OE) { - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character. - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - ignore_char: - *status = serial_in(up, UART_LSR); - } while ((*status & UART_LSR_DR) && (max_count-- > 0)); - tty_flip_buffer_push(tty); -} - -static void transmit_chars(struct uart_sio_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { -#ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */ - serial_out(up, UART_TX, up->port.x_char); -#endif - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - m32r_sio_stop_tx(&up->port); - return; - } - - count = up->port.fifosize; - do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - while (!(serial_in(up, UART_LSR) & UART_LSR_THRE)); - - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - DEBUG_INTR("THRE..."); - - if (uart_circ_empty(xmit)) - m32r_sio_stop_tx(&up->port); -} - -/* - * This handles the interrupt from one port. - */ -static inline void m32r_sio_handle_port(struct uart_sio_port *up, - unsigned int status) -{ - DEBUG_INTR("status = %x...", status); - - if (status & 0x04) - receive_chars(up, &status); - if (status & 0x01) - transmit_chars(up); -} - -/* - * This is the serial driver's interrupt routine. - * - * Arjan thinks the old way was overly complex, so it got simplified. - * Alan disagrees, saying that need the complexity to handle the weird - * nature of ISA shared interrupts. (This is a special exception.) - * - * In order to handle ISA shared interrupts properly, we need to check - * that all ports have been serviced, and therefore the ISA interrupt - * line has been de-asserted. - * - * This means we need to loop through all ports. checking that they - * don't have an interrupt pending. - */ -static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id) -{ - struct irq_info *i = dev_id; - struct list_head *l, *end = NULL; - int pass_counter = 0; - - DEBUG_INTR("m32r_sio_interrupt(%d)...", irq); - -#ifdef CONFIG_SERIAL_M32R_PLDSIO -// if (irq == PLD_IRQ_SIO0_SND) -// irq = PLD_IRQ_SIO0_RCV; -#else - if (irq == M32R_IRQ_SIO0_S) - irq = M32R_IRQ_SIO0_R; -#endif - - spin_lock(&i->lock); - - l = i->head; - do { - struct uart_sio_port *up; - unsigned int sts; - - up = list_entry(l, struct uart_sio_port, list); - - sts = sio_in(up, SIOSTS); - if (sts & 0x5) { - spin_lock(&up->port.lock); - m32r_sio_handle_port(up, sts); - spin_unlock(&up->port.lock); - - end = NULL; - } else if (end == NULL) - end = l; - - l = l->next; - - if (l == i->head && pass_counter++ > PASS_LIMIT) { - if (sts & 0xe0) - sio_error(&sts); - break; - } - } while (l != end); - - spin_unlock(&i->lock); - - DEBUG_INTR("end.\n"); - - return IRQ_HANDLED; -} - -/* - * To support ISA shared interrupts, we need to have one interrupt - * handler that ensures that the IRQ line has been deasserted - * before returning. Failing to do this will result in the IRQ - * line being stuck active, and, since ISA irqs are edge triggered, - * no more IRQs will be seen. - */ -static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up) -{ - spin_lock_irq(&i->lock); - - if (!list_empty(i->head)) { - if (i->head == &up->list) - i->head = i->head->next; - list_del(&up->list); - } else { - BUG_ON(i->head != &up->list); - i->head = NULL; - } - - spin_unlock_irq(&i->lock); -} - -static int serial_link_irq_chain(struct uart_sio_port *up) -{ - struct irq_info *i = irq_lists + up->port.irq; - int ret, irq_flags = 0; - - spin_lock_irq(&i->lock); - - if (i->head) { - list_add(&up->list, i->head); - spin_unlock_irq(&i->lock); - - ret = 0; - } else { - INIT_LIST_HEAD(&up->list); - i->head = &up->list; - spin_unlock_irq(&i->lock); - - ret = request_irq(up->port.irq, m32r_sio_interrupt, - irq_flags, "SIO0-RX", i); - ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt, - irq_flags, "SIO0-TX", i); - if (ret < 0) - serial_do_unlink(i, up); - } - - return ret; -} - -static void serial_unlink_irq_chain(struct uart_sio_port *up) -{ - struct irq_info *i = irq_lists + up->port.irq; - - BUG_ON(i->head == NULL); - - if (list_empty(i->head)) { - free_irq(up->port.irq, i); - free_irq(up->port.irq + 1, i); - } - - serial_do_unlink(i, up); -} - -/* - * This function is used to handle ports that do not have an interrupt. - */ -static void m32r_sio_timeout(unsigned long data) -{ - struct uart_sio_port *up = (struct uart_sio_port *)data; - unsigned int timeout; - unsigned int sts; - - sts = sio_in(up, SIOSTS); - if (sts & 0x5) { - spin_lock(&up->port.lock); - m32r_sio_handle_port(up, sts); - spin_unlock(&up->port.lock); - } - - timeout = up->port.timeout; - timeout = timeout > 6 ? (timeout / 2 - 2) : 1; - mod_timer(&up->timer, jiffies + timeout); -} - -static unsigned int m32r_sio_tx_empty(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&up->port.lock, flags); - ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret; -} - -static unsigned int m32r_sio_get_mctrl(struct uart_port *port) -{ - return 0; -} - -static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - -} - -static void m32r_sio_break_ctl(struct uart_port *port, int break_state) -{ - -} - -static int m32r_sio_startup(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - int retval; - - sio_init(); - - /* - * If the "interrupt" for this port doesn't correspond with any - * hardware interrupt, we use a timer-based system. The original - * driver used to do this with IRQ0. - */ - if (!is_real_interrupt(up->port.irq)) { - unsigned int timeout = up->port.timeout; - - timeout = timeout > 6 ? (timeout / 2 - 2) : 1; - - up->timer.data = (unsigned long)up; - mod_timer(&up->timer, jiffies + timeout); - } else { - retval = serial_link_irq_chain(up); - if (retval) - return retval; - } - - /* - * Finally, enable interrupts. Note: Modem status interrupts - * are set via set_termios(), which will be occurring imminently - * anyway, so we don't enable them here. - * - M32R_SIO: 0x0c - * - M32R_PLDSIO: 0x04 - */ - up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; - sio_out(up, SIOTRCR, up->ier); - - /* - * And clear the interrupt registers again for luck. - */ - sio_reset(); - - return 0; -} - -static void m32r_sio_shutdown(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - /* - * Disable interrupts from this port - */ - up->ier = 0; - sio_out(up, SIOTRCR, 0); - - /* - * Disable break condition and FIFOs - */ - - sio_init(); - - if (!is_real_interrupt(up->port.irq)) - del_timer_sync(&up->timer); - else - serial_unlink_irq_chain(up); -} - -static unsigned int m32r_sio_get_divisor(struct uart_port *port, - unsigned int baud) -{ - return uart_get_divisor(port, baud); -} - -static void m32r_sio_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - unsigned char cval = 0; - unsigned long flags; - unsigned int baud, quot; - - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } - - if (termios->c_cflag & CSTOPB) - cval |= UART_LCR_STOP; - if (termios->c_cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(termios->c_cflag & PARODD)) - cval |= UART_LCR_EPAR; -#ifdef CMSPAR - if (termios->c_cflag & CMSPAR) - cval |= UART_LCR_SPAR; -#endif - - /* - * Ask the core to calculate the divisor for us. - */ -#ifdef CONFIG_SERIAL_M32R_PLDSIO - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4); -#else - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); -#endif - quot = m32r_sio_get_divisor(port, baud); - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - sio_set_baud_rate(baud); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (termios->c_iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (termios->c_iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; - - /* - * Characteres to ignore - */ - up->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; - - /* - * CTS flow control flag and modem status interrupts - */ - up->ier &= ~UART_IER_MSI; - if (UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->ier |= UART_IER_MSI; - - serial_out(up, UART_IER, up->ier); - - up->lcr = cval; /* Save LCR */ - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void m32r_sio_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - if (up->pm) - up->pm(port, state, oldstate); -} - -/* - * Resource handling. This is complicated by the fact that resources - * depend on the port type. Maybe we should be claiming the standard - * 8250 ports, and then trying to get other resources as necessary? - */ -static int -m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res) -{ - unsigned int size = 8 << up->port.regshift; -#ifndef CONFIG_SERIAL_M32R_PLDSIO - unsigned long start; -#endif - int ret = 0; - - switch (up->port.iotype) { - case UPIO_MEM: - if (up->port.mapbase) { -#ifdef CONFIG_SERIAL_M32R_PLDSIO - *res = request_mem_region(up->port.mapbase, size, "serial"); -#else - start = up->port.mapbase; - *res = request_mem_region(start, size, "serial"); -#endif - if (!*res) - ret = -EBUSY; - } - break; - - case UPIO_PORT: - *res = request_region(up->port.iobase, size, "serial"); - if (!*res) - ret = -EBUSY; - break; - } - return ret; -} - -static void m32r_sio_release_port(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - unsigned long start, offset = 0, size = 0; - - size <<= up->port.regshift; - - switch (up->port.iotype) { - case UPIO_MEM: - if (up->port.mapbase) { - /* - * Unmap the area. - */ - iounmap(up->port.membase); - up->port.membase = NULL; - - start = up->port.mapbase; - - if (size) - release_mem_region(start + offset, size); - release_mem_region(start, 8 << up->port.regshift); - } - break; - - case UPIO_PORT: - start = up->port.iobase; - - if (size) - release_region(start + offset, size); - release_region(start + offset, 8 << up->port.regshift); - break; - - default: - break; - } -} - -static int m32r_sio_request_port(struct uart_port *port) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - struct resource *res = NULL; - int ret = 0; - - ret = m32r_sio_request_std_resource(up, &res); - - /* - * If we have a mapbase, then request that as well. - */ - if (ret == 0 && up->port.flags & UPF_IOREMAP) { - int size = res->end - res->start + 1; - - up->port.membase = ioremap(up->port.mapbase, size); - if (!up->port.membase) - ret = -ENOMEM; - } - - if (ret < 0) { - if (res) - release_resource(res); - } - - return ret; -} - -static void m32r_sio_config_port(struct uart_port *port, int flags) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - spin_lock_irqsave(&up->port.lock, flags); - - up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1); - up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static int -m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - if (ser->irq >= nr_irqs || ser->irq < 0 || - ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || - ser->type >= ARRAY_SIZE(uart_config)) - return -EINVAL; - return 0; -} - -static const char * -m32r_sio_type(struct uart_port *port) -{ - int type = port->type; - - if (type >= ARRAY_SIZE(uart_config)) - type = 0; - return uart_config[type].name; -} - -static struct uart_ops m32r_sio_pops = { - .tx_empty = m32r_sio_tx_empty, - .set_mctrl = m32r_sio_set_mctrl, - .get_mctrl = m32r_sio_get_mctrl, - .stop_tx = m32r_sio_stop_tx, - .start_tx = m32r_sio_start_tx, - .stop_rx = m32r_sio_stop_rx, - .enable_ms = m32r_sio_enable_ms, - .break_ctl = m32r_sio_break_ctl, - .startup = m32r_sio_startup, - .shutdown = m32r_sio_shutdown, - .set_termios = m32r_sio_set_termios, - .pm = m32r_sio_pm, - .type = m32r_sio_type, - .release_port = m32r_sio_release_port, - .request_port = m32r_sio_request_port, - .config_port = m32r_sio_config_port, - .verify_port = m32r_sio_verify_port, -}; - -static struct uart_sio_port m32r_sio_ports[UART_NR]; - -static void __init m32r_sio_init_ports(void) -{ - struct uart_sio_port *up; - static int first = 1; - int i; - - if (!first) - return; - first = 0; - - for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port); - i++, up++) { - up->port.iobase = old_serial_port[i].port; - up->port.irq = irq_canonicalize(old_serial_port[i].irq); - up->port.uartclk = old_serial_port[i].baud_base * 16; - up->port.flags = old_serial_port[i].flags; - up->port.membase = old_serial_port[i].iomem_base; - up->port.iotype = old_serial_port[i].io_type; - up->port.regshift = old_serial_port[i].iomem_reg_shift; - up->port.ops = &m32r_sio_pops; - } -} - -static void __init m32r_sio_register_ports(struct uart_driver *drv) -{ - int i; - - m32r_sio_init_ports(); - - for (i = 0; i < UART_NR; i++) { - struct uart_sio_port *up = &m32r_sio_ports[i]; - - up->port.line = i; - up->port.ops = &m32r_sio_pops; - init_timer(&up->timer); - up->timer.function = m32r_sio_timeout; - - /* - * ALPHA_KLUDGE_MCR needs to be killed. - */ - up->mcr_mask = ~ALPHA_KLUDGE_MCR; - up->mcr_force = ALPHA_KLUDGE_MCR; - - uart_add_one_port(drv, &up->port); - } -} - -#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE - -/* - * Wait for transmitter & holding register to empty - */ -static inline void wait_for_xmitr(struct uart_sio_port *up) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = sio_in(up, SIOSTS); - - if (--tmout == 0) - break; - udelay(1); - } while ((status & UART_EMPTY) != UART_EMPTY); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout) - udelay(1); - } -} - -static void m32r_sio_console_putchar(struct uart_port *port, int ch) -{ - struct uart_sio_port *up = (struct uart_sio_port *)port; - - wait_for_xmitr(up); - sio_out(up, SIOTXB, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void m32r_sio_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_sio_port *up = &m32r_sio_ports[co->index]; - unsigned int ier; - - /* - * First save the UER then disable the interrupts - */ - ier = sio_in(up, SIOTRCR); - sio_out(up, SIOTRCR, 0); - - uart_console_write(&up->port, s, count, m32r_sio_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - sio_out(up, SIOTRCR, ier); -} - -static int __init m32r_sio_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= UART_NR) - co->index = 0; - port = &m32r_sio_ports[co->index].port; - - /* - * Temporary fix. - */ - spin_lock_init(&port->lock); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver m32r_sio_reg; -static struct console m32r_sio_console = { - .name = "ttyS", - .write = m32r_sio_console_write, - .device = uart_console_device, - .setup = m32r_sio_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &m32r_sio_reg, -}; - -static int __init m32r_sio_console_init(void) -{ - sio_reset(); - sio_init(); - m32r_sio_init_ports(); - register_console(&m32r_sio_console); - return 0; -} -console_initcall(m32r_sio_console_init); - -#define M32R_SIO_CONSOLE &m32r_sio_console -#else -#define M32R_SIO_CONSOLE NULL -#endif - -static struct uart_driver m32r_sio_reg = { - .owner = THIS_MODULE, - .driver_name = "sio", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = UART_NR, - .cons = M32R_SIO_CONSOLE, -}; - -/** - * m32r_sio_suspend_port - suspend one serial port - * @line: serial line number - * - * Suspend one serial port. - */ -void m32r_sio_suspend_port(int line) -{ - uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port); -} - -/** - * m32r_sio_resume_port - resume one serial port - * @line: serial line number - * - * Resume one serial port. - */ -void m32r_sio_resume_port(int line) -{ - uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port); -} - -static int __init m32r_sio_init(void) -{ - int ret, i; - - printk(KERN_INFO "Serial: M32R SIO driver\n"); - - for (i = 0; i < nr_irqs; i++) - spin_lock_init(&irq_lists[i].lock); - - ret = uart_register_driver(&m32r_sio_reg); - if (ret >= 0) - m32r_sio_register_ports(&m32r_sio_reg); - - return ret; -} - -static void __exit m32r_sio_exit(void) -{ - int i; - - for (i = 0; i < UART_NR; i++) - uart_remove_one_port(&m32r_sio_reg, &m32r_sio_ports[i].port); - - uart_unregister_driver(&m32r_sio_reg); -} - -module_init(m32r_sio_init); -module_exit(m32r_sio_exit); - -EXPORT_SYMBOL(m32r_sio_suspend_port); -EXPORT_SYMBOL(m32r_sio_resume_port); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Generic M32R SIO serial driver"); diff --git a/drivers/serial/m32r_sio.h b/drivers/serial/m32r_sio.h deleted file mode 100644 index e9b7e11793b1..000000000000 --- a/drivers/serial/m32r_sio.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * m32r_sio.h - * - * Driver for M32R serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * Based on drivers/serial/8250.h. - * - * Copyright (C) 2001 Russell King. - * Copyright (C) 2004 Hirokazu Takata - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - - -struct m32r_sio_probe { - struct module *owner; - int (*pci_init_one)(struct pci_dev *dev); - void (*pci_remove_one)(struct pci_dev *dev); - void (*pnp_init)(void); -}; - -int m32r_sio_register_probe(struct m32r_sio_probe *probe); -void m32r_sio_unregister_probe(struct m32r_sio_probe *probe); -void m32r_sio_get_irq_map(unsigned int *map); -void m32r_sio_suspend_port(int line); -void m32r_sio_resume_port(int line); - -struct old_serial_port { - unsigned int uart; - unsigned int baud_base; - unsigned int port; - unsigned int irq; - unsigned int flags; - unsigned char io_type; - unsigned char __iomem *iomem_base; - unsigned short iomem_reg_shift; -}; - -#define _INLINE_ inline - -#define PROBE_RSA (1 << 0) -#define PROBE_ANY (~0) - -#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) diff --git a/drivers/serial/m32r_sio_reg.h b/drivers/serial/m32r_sio_reg.h deleted file mode 100644 index 4671473793e3..000000000000 --- a/drivers/serial/m32r_sio_reg.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * m32r_sio_reg.h - * - * Copyright (C) 1992, 1994 by Theodore Ts'o. - * Copyright (C) 2004 Hirokazu Takata - * - * Redistribution of this file is permitted under the terms of the GNU - * Public License (GPL) - * - * These are the UART port assignments, expressed as offsets from the base - * register. These assignments should hold for any serial port based on - * a 8250, 16450, or 16550(A). - */ - -#ifndef _M32R_SIO_REG_H -#define _M32R_SIO_REG_H - - -#ifdef CONFIG_SERIAL_M32R_PLDSIO - -#define SIOCR 0x000 -#define SIOMOD0 0x002 -#define SIOMOD1 0x004 -#define SIOSTS 0x006 -#define SIOTRCR 0x008 -#define SIOBAUR 0x00a -// #define SIORBAUR 0x018 -#define SIOTXB 0x00c -#define SIORXB 0x00e - -#define UART_RX ((unsigned long) PLD_ESIO0RXB) - /* In: Receive buffer (DLAB=0) */ -#define UART_TX ((unsigned long) PLD_ESIO0TXB) - /* Out: Transmit buffer (DLAB=0) */ -#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ -#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx - * In: Fifo count - * Out: Fifo custom trigger levels - * XR16C85x only */ - -#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ -#define UART_IER ((unsigned long) PLD_ESIO0INTCR) - /* Out: Interrupt Enable Register */ -#define UART_FCTR 0 /* (LCR=BF) Feature Control Register - * XR16C85x only */ - -#define UART_IIR 0 /* In: Interrupt ID Register */ -#define UART_FCR 0 /* Out: FIFO Control Register */ -#define UART_EFR 0 /* I/O: Extended Features Register */ - /* (DLAB=1, 16C660 only) */ - -#define UART_LCR 0 /* Out: Line Control Register */ -#define UART_MCR 0 /* Out: Modem Control Register */ -#define UART_LSR ((unsigned long) PLD_ESIO0STS) - /* In: Line Status Register */ -#define UART_MSR 0 /* In: Modem Status Register */ -#define UART_SCR 0 /* I/O: Scratch Register */ -#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register - * FCTR bit 6 selects SCR or EMSR - * XR16c85x only */ - -#else /* not CONFIG_SERIAL_M32R_PLDSIO */ - -#define SIOCR 0x000 -#define SIOMOD0 0x004 -#define SIOMOD1 0x008 -#define SIOSTS 0x00c -#define SIOTRCR 0x010 -#define SIOBAUR 0x014 -#define SIORBAUR 0x018 -#define SIOTXB 0x01c -#define SIORXB 0x020 - -#define UART_RX M32R_SIO0_RXB_PORTL /* In: Receive buffer (DLAB=0) */ -#define UART_TX M32R_SIO0_TXB_PORTL /* Out: Transmit buffer (DLAB=0) */ -#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ -#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx - * In: Fifo count - * Out: Fifo custom trigger levels - * XR16C85x only */ - -#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ -#define UART_IER M32R_SIO0_TRCR_PORTL /* Out: Interrupt Enable Register */ -#define UART_FCTR 0 /* (LCR=BF) Feature Control Register - * XR16C85x only */ - -#define UART_IIR 0 /* In: Interrupt ID Register */ -#define UART_FCR 0 /* Out: FIFO Control Register */ -#define UART_EFR 0 /* I/O: Extended Features Register */ - /* (DLAB=1, 16C660 only) */ - -#define UART_LCR 0 /* Out: Line Control Register */ -#define UART_MCR 0 /* Out: Modem Control Register */ -#define UART_LSR M32R_SIO0_STS_PORTL /* In: Line Status Register */ -#define UART_MSR 0 /* In: Modem Status Register */ -#define UART_SCR 0 /* I/O: Scratch Register */ -#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register - * FCTR bit 6 selects SCR or EMSR - * XR16c85x only */ - -#endif /* CONFIG_SERIAL_M32R_PLDSIO */ - -#define UART_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -/* - * These are the definitions for the Line Control Register - * - * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting - * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. - */ -#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ -#define UART_LCR_SBC 0x40 /* Set break control */ -#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ -#define UART_LCR_EPAR 0x10 /* Even parity select */ -#define UART_LCR_PARITY 0x08 /* Parity Enable */ -#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ -#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ -#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ -#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ -#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ - -/* - * These are the definitions for the Line Status Register - */ -#define UART_LSR_TEMT 0x02 /* Transmitter empty */ -#define UART_LSR_THRE 0x01 /* Transmit-hold-register empty */ -#define UART_LSR_BI 0x00 /* Break interrupt indicator */ -#define UART_LSR_FE 0x80 /* Frame error indicator */ -#define UART_LSR_PE 0x40 /* Parity error indicator */ -#define UART_LSR_OE 0x20 /* Overrun error indicator */ -#define UART_LSR_DR 0x04 /* Receiver data ready */ - -/* - * These are the definitions for the Interrupt Identification Register - */ -#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ -#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ - -#define UART_IIR_MSI 0x00 /* Modem status interrupt */ -#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ -#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ -#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ - -/* - * These are the definitions for the Interrupt Enable Register - */ -#define UART_IER_MSI 0x00 /* Enable Modem status interrupt */ -#define UART_IER_RLSI 0x08 /* Enable receiver line status interrupt */ -#define UART_IER_THRI 0x03 /* Enable Transmitter holding register int. */ -#define UART_IER_RDI 0x04 /* Enable receiver data interrupt */ - -#endif /* _M32R_SIO_REG_H */ diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c deleted file mode 100644 index beb1afa27d8d..000000000000 --- a/drivers/serial/max3100.c +++ /dev/null @@ -1,926 +0,0 @@ -/* - * - * Copyright (C) 2008 Christian Pellegrin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * - * Notes: the MAX3100 doesn't provide an interrupt on CTS so we have - * to use polling for flow control. TX empty IRQ is unusable, since - * writing conf clears FIFO buffer and we cannot have this interrupt - * always asking us for attention. - * - * Example platform data: - - static struct plat_max3100 max3100_plat_data = { - .loopback = 0, - .crystal = 0, - .poll_time = 100, - }; - - static struct spi_board_info spi_board_info[] = { - { - .modalias = "max3100", - .platform_data = &max3100_plat_data, - .irq = IRQ_EINT12, - .max_speed_hz = 5*1000*1000, - .chip_select = 0, - }, - }; - - * The initial minor number is 209 in the low-density serial port: - * mknod /dev/ttyMAX0 c 204 209 - */ - -#define MAX3100_MAJOR 204 -#define MAX3100_MINOR 209 -/* 4 MAX3100s should be enough for everyone */ -#define MAX_MAX3100 4 - -#include -#include -#include -#include -#include -#include -#include - -#include - -#define MAX3100_C (1<<14) -#define MAX3100_D (0<<14) -#define MAX3100_W (1<<15) -#define MAX3100_RX (0<<15) - -#define MAX3100_WC (MAX3100_W | MAX3100_C) -#define MAX3100_RC (MAX3100_RX | MAX3100_C) -#define MAX3100_WD (MAX3100_W | MAX3100_D) -#define MAX3100_RD (MAX3100_RX | MAX3100_D) -#define MAX3100_CMD (3 << 14) - -#define MAX3100_T (1<<14) -#define MAX3100_R (1<<15) - -#define MAX3100_FEN (1<<13) -#define MAX3100_SHDN (1<<12) -#define MAX3100_TM (1<<11) -#define MAX3100_RM (1<<10) -#define MAX3100_PM (1<<9) -#define MAX3100_RAM (1<<8) -#define MAX3100_IR (1<<7) -#define MAX3100_ST (1<<6) -#define MAX3100_PE (1<<5) -#define MAX3100_L (1<<4) -#define MAX3100_BAUD (0xf) - -#define MAX3100_TE (1<<10) -#define MAX3100_RAFE (1<<10) -#define MAX3100_RTS (1<<9) -#define MAX3100_CTS (1<<9) -#define MAX3100_PT (1<<8) -#define MAX3100_DATA (0xff) - -#define MAX3100_RT (MAX3100_R | MAX3100_T) -#define MAX3100_RTC (MAX3100_RT | MAX3100_CTS | MAX3100_RAFE) - -/* the following simulate a status reg for ignore_status_mask */ -#define MAX3100_STATUS_PE 1 -#define MAX3100_STATUS_FE 2 -#define MAX3100_STATUS_OE 4 - -struct max3100_port { - struct uart_port port; - struct spi_device *spi; - - int cts; /* last CTS received for flow ctrl */ - int tx_empty; /* last TX empty bit */ - - spinlock_t conf_lock; /* shared data */ - int conf_commit; /* need to make changes */ - int conf; /* configuration for the MAX31000 - * (bits 0-7, bits 8-11 are irqs) */ - int rts_commit; /* need to change rts */ - int rts; /* rts status */ - int baud; /* current baud rate */ - - int parity; /* keeps track if we should send parity */ -#define MAX3100_PARITY_ON 1 -#define MAX3100_PARITY_ODD 2 -#define MAX3100_7BIT 4 - int rx_enabled; /* if we should rx chars */ - - int irq; /* irq assigned to the max3100 */ - - int minor; /* minor number */ - int crystal; /* 1 if 3.6864Mhz crystal 0 for 1.8432 */ - int loopback; /* 1 if we are in loopback mode */ - - /* for handling irqs: need workqueue since we do spi_sync */ - struct workqueue_struct *workqueue; - struct work_struct work; - /* set to 1 to make the workhandler exit as soon as possible */ - int force_end_work; - /* need to know we are suspending to avoid deadlock on workqueue */ - int suspending; - - /* hook for suspending MAX3100 via dedicated pin */ - void (*max3100_hw_suspend) (int suspend); - - /* poll time (in ms) for ctrl lines */ - int poll_time; - /* and its timer */ - struct timer_list timer; -}; - -static struct max3100_port *max3100s[MAX_MAX3100]; /* the chips */ -static DEFINE_MUTEX(max3100s_lock); /* race on probe */ - -static int max3100_do_parity(struct max3100_port *s, u16 c) -{ - int parity; - - if (s->parity & MAX3100_PARITY_ODD) - parity = 1; - else - parity = 0; - - if (s->parity & MAX3100_7BIT) - c &= 0x7f; - else - c &= 0xff; - - parity = parity ^ (hweight8(c) & 1); - return parity; -} - -static int max3100_check_parity(struct max3100_port *s, u16 c) -{ - return max3100_do_parity(s, c) == ((c >> 8) & 1); -} - -static void max3100_calc_parity(struct max3100_port *s, u16 *c) -{ - if (s->parity & MAX3100_7BIT) - *c &= 0x7f; - else - *c &= 0xff; - - if (s->parity & MAX3100_PARITY_ON) - *c |= max3100_do_parity(s, *c) << 8; -} - -static void max3100_work(struct work_struct *w); - -static void max3100_dowork(struct max3100_port *s) -{ - if (!s->force_end_work && !work_pending(&s->work) && - !freezing(current) && !s->suspending) - queue_work(s->workqueue, &s->work); -} - -static void max3100_timeout(unsigned long data) -{ - struct max3100_port *s = (struct max3100_port *)data; - - if (s->port.state) { - max3100_dowork(s); - mod_timer(&s->timer, jiffies + s->poll_time); - } -} - -static int max3100_sr(struct max3100_port *s, u16 tx, u16 *rx) -{ - struct spi_message message; - u16 etx, erx; - int status; - struct spi_transfer tran = { - .tx_buf = &etx, - .rx_buf = &erx, - .len = 2, - }; - - etx = cpu_to_be16(tx); - spi_message_init(&message); - spi_message_add_tail(&tran, &message); - status = spi_sync(s->spi, &message); - if (status) { - dev_warn(&s->spi->dev, "error while calling spi_sync\n"); - return -EIO; - } - *rx = be16_to_cpu(erx); - s->tx_empty = (*rx & MAX3100_T) > 0; - dev_dbg(&s->spi->dev, "%04x - %04x\n", tx, *rx); - return 0; -} - -static int max3100_handlerx(struct max3100_port *s, u16 rx) -{ - unsigned int ch, flg, status = 0; - int ret = 0, cts; - - if (rx & MAX3100_R && s->rx_enabled) { - dev_dbg(&s->spi->dev, "%s\n", __func__); - ch = rx & (s->parity & MAX3100_7BIT ? 0x7f : 0xff); - if (rx & MAX3100_RAFE) { - s->port.icount.frame++; - flg = TTY_FRAME; - status |= MAX3100_STATUS_FE; - } else { - if (s->parity & MAX3100_PARITY_ON) { - if (max3100_check_parity(s, rx)) { - s->port.icount.rx++; - flg = TTY_NORMAL; - } else { - s->port.icount.parity++; - flg = TTY_PARITY; - status |= MAX3100_STATUS_PE; - } - } else { - s->port.icount.rx++; - flg = TTY_NORMAL; - } - } - uart_insert_char(&s->port, status, MAX3100_STATUS_OE, ch, flg); - ret = 1; - } - - cts = (rx & MAX3100_CTS) > 0; - if (s->cts != cts) { - s->cts = cts; - uart_handle_cts_change(&s->port, cts ? TIOCM_CTS : 0); - } - - return ret; -} - -static void max3100_work(struct work_struct *w) -{ - struct max3100_port *s = container_of(w, struct max3100_port, work); - int rxchars; - u16 tx, rx; - int conf, cconf, rts, crts; - struct circ_buf *xmit = &s->port.state->xmit; - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - rxchars = 0; - do { - spin_lock(&s->conf_lock); - conf = s->conf; - cconf = s->conf_commit; - s->conf_commit = 0; - rts = s->rts; - crts = s->rts_commit; - s->rts_commit = 0; - spin_unlock(&s->conf_lock); - if (cconf) - max3100_sr(s, MAX3100_WC | conf, &rx); - if (crts) { - max3100_sr(s, MAX3100_WD | MAX3100_TE | - (s->rts ? MAX3100_RTS : 0), &rx); - rxchars += max3100_handlerx(s, rx); - } - - max3100_sr(s, MAX3100_RD, &rx); - rxchars += max3100_handlerx(s, rx); - - if (rx & MAX3100_T) { - tx = 0xffff; - if (s->port.x_char) { - tx = s->port.x_char; - s->port.icount.tx++; - s->port.x_char = 0; - } else if (!uart_circ_empty(xmit) && - !uart_tx_stopped(&s->port)) { - tx = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & - (UART_XMIT_SIZE - 1); - s->port.icount.tx++; - } - if (tx != 0xffff) { - max3100_calc_parity(s, &tx); - tx |= MAX3100_WD | (s->rts ? MAX3100_RTS : 0); - max3100_sr(s, tx, &rx); - rxchars += max3100_handlerx(s, rx); - } - } - - if (rxchars > 16 && s->port.state->port.tty != NULL) { - tty_flip_buffer_push(s->port.state->port.tty); - rxchars = 0; - } - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&s->port); - - } while (!s->force_end_work && - !freezing(current) && - ((rx & MAX3100_R) || - (!uart_circ_empty(xmit) && - !uart_tx_stopped(&s->port)))); - - if (rxchars > 0 && s->port.state->port.tty != NULL) - tty_flip_buffer_push(s->port.state->port.tty); -} - -static irqreturn_t max3100_irq(int irqno, void *dev_id) -{ - struct max3100_port *s = dev_id; - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - max3100_dowork(s); - return IRQ_HANDLED; -} - -static void max3100_enable_ms(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - if (s->poll_time > 0) - mod_timer(&s->timer, jiffies); - dev_dbg(&s->spi->dev, "%s\n", __func__); -} - -static void max3100_start_tx(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - max3100_dowork(s); -} - -static void max3100_stop_rx(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - s->rx_enabled = 0; - spin_lock(&s->conf_lock); - s->conf &= ~MAX3100_RM; - s->conf_commit = 1; - spin_unlock(&s->conf_lock); - max3100_dowork(s); -} - -static unsigned int max3100_tx_empty(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - /* may not be truly up-to-date */ - max3100_dowork(s); - return s->tx_empty; -} - -static unsigned int max3100_get_mctrl(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - /* may not be truly up-to-date */ - max3100_dowork(s); - /* always assert DCD and DSR since these lines are not wired */ - return (s->cts ? TIOCM_CTS : 0) | TIOCM_DSR | TIOCM_CAR; -} - -static void max3100_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - int rts; - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - rts = (mctrl & TIOCM_RTS) > 0; - - spin_lock(&s->conf_lock); - if (s->rts != rts) { - s->rts = rts; - s->rts_commit = 1; - max3100_dowork(s); - } - spin_unlock(&s->conf_lock); -} - -static void -max3100_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - int baud = 0; - unsigned cflag; - u32 param_new, param_mask, parity = 0; - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - cflag = termios->c_cflag; - param_new = 0; - param_mask = 0; - - baud = tty_termios_baud_rate(termios); - param_new = s->conf & MAX3100_BAUD; - switch (baud) { - case 300: - if (s->crystal) - baud = s->baud; - else - param_new = 15; - break; - case 600: - param_new = 14 + s->crystal; - break; - case 1200: - param_new = 13 + s->crystal; - break; - case 2400: - param_new = 12 + s->crystal; - break; - case 4800: - param_new = 11 + s->crystal; - break; - case 9600: - param_new = 10 + s->crystal; - break; - case 19200: - param_new = 9 + s->crystal; - break; - case 38400: - param_new = 8 + s->crystal; - break; - case 57600: - param_new = 1 + s->crystal; - break; - case 115200: - param_new = 0 + s->crystal; - break; - case 230400: - if (s->crystal) - param_new = 0; - else - baud = s->baud; - break; - default: - baud = s->baud; - } - tty_termios_encode_baud_rate(termios, baud, baud); - s->baud = baud; - param_mask |= MAX3100_BAUD; - - if ((cflag & CSIZE) == CS8) { - param_new &= ~MAX3100_L; - parity &= ~MAX3100_7BIT; - } else { - param_new |= MAX3100_L; - parity |= MAX3100_7BIT; - cflag = (cflag & ~CSIZE) | CS7; - } - param_mask |= MAX3100_L; - - if (cflag & CSTOPB) - param_new |= MAX3100_ST; - else - param_new &= ~MAX3100_ST; - param_mask |= MAX3100_ST; - - if (cflag & PARENB) { - param_new |= MAX3100_PE; - parity |= MAX3100_PARITY_ON; - } else { - param_new &= ~MAX3100_PE; - parity &= ~MAX3100_PARITY_ON; - } - param_mask |= MAX3100_PE; - - if (cflag & PARODD) - parity |= MAX3100_PARITY_ODD; - else - parity &= ~MAX3100_PARITY_ODD; - - /* mask termios capabilities we don't support */ - cflag &= ~CMSPAR; - termios->c_cflag = cflag; - - s->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - s->port.ignore_status_mask |= - MAX3100_STATUS_PE | MAX3100_STATUS_FE | - MAX3100_STATUS_OE; - - /* we are sending char from a workqueue so enable */ - s->port.state->port.tty->low_latency = 1; - - if (s->poll_time > 0) - del_timer_sync(&s->timer); - - uart_update_timeout(port, termios->c_cflag, baud); - - spin_lock(&s->conf_lock); - s->conf = (s->conf & ~param_mask) | (param_new & param_mask); - s->conf_commit = 1; - s->parity = parity; - spin_unlock(&s->conf_lock); - max3100_dowork(s); - - if (UART_ENABLE_MS(&s->port, termios->c_cflag)) - max3100_enable_ms(&s->port); -} - -static void max3100_shutdown(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - if (s->suspending) - return; - - s->force_end_work = 1; - - if (s->poll_time > 0) - del_timer_sync(&s->timer); - - if (s->workqueue) { - flush_workqueue(s->workqueue); - destroy_workqueue(s->workqueue); - s->workqueue = NULL; - } - if (s->irq) - free_irq(s->irq, s); - - /* set shutdown mode to save power */ - if (s->max3100_hw_suspend) - s->max3100_hw_suspend(1); - else { - u16 tx, rx; - - tx = MAX3100_WC | MAX3100_SHDN; - max3100_sr(s, tx, &rx); - } -} - -static int max3100_startup(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - char b[12]; - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - s->conf = MAX3100_RM; - s->baud = s->crystal ? 230400 : 115200; - s->rx_enabled = 1; - - if (s->suspending) - return 0; - - s->force_end_work = 0; - s->parity = 0; - s->rts = 0; - - sprintf(b, "max3100-%d", s->minor); - s->workqueue = create_freezeable_workqueue(b); - if (!s->workqueue) { - dev_warn(&s->spi->dev, "cannot create workqueue\n"); - return -EBUSY; - } - INIT_WORK(&s->work, max3100_work); - - if (request_irq(s->irq, max3100_irq, - IRQF_TRIGGER_FALLING, "max3100", s) < 0) { - dev_warn(&s->spi->dev, "cannot allocate irq %d\n", s->irq); - s->irq = 0; - destroy_workqueue(s->workqueue); - s->workqueue = NULL; - return -EBUSY; - } - - if (s->loopback) { - u16 tx, rx; - tx = 0x4001; - max3100_sr(s, tx, &rx); - } - - if (s->max3100_hw_suspend) - s->max3100_hw_suspend(0); - s->conf_commit = 1; - max3100_dowork(s); - /* wait for clock to settle */ - msleep(50); - - max3100_enable_ms(&s->port); - - return 0; -} - -static const char *max3100_type(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - return s->port.type == PORT_MAX3100 ? "MAX3100" : NULL; -} - -static void max3100_release_port(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); -} - -static void max3100_config_port(struct uart_port *port, int flags) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - if (flags & UART_CONFIG_TYPE) - s->port.type = PORT_MAX3100; -} - -static int max3100_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - int ret = -EINVAL; - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100) - ret = 0; - return ret; -} - -static void max3100_stop_tx(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); -} - -static int max3100_request_port(struct uart_port *port) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - return 0; -} - -static void max3100_break_ctl(struct uart_port *port, int break_state) -{ - struct max3100_port *s = container_of(port, - struct max3100_port, - port); - - dev_dbg(&s->spi->dev, "%s\n", __func__); -} - -static struct uart_ops max3100_ops = { - .tx_empty = max3100_tx_empty, - .set_mctrl = max3100_set_mctrl, - .get_mctrl = max3100_get_mctrl, - .stop_tx = max3100_stop_tx, - .start_tx = max3100_start_tx, - .stop_rx = max3100_stop_rx, - .enable_ms = max3100_enable_ms, - .break_ctl = max3100_break_ctl, - .startup = max3100_startup, - .shutdown = max3100_shutdown, - .set_termios = max3100_set_termios, - .type = max3100_type, - .release_port = max3100_release_port, - .request_port = max3100_request_port, - .config_port = max3100_config_port, - .verify_port = max3100_verify_port, -}; - -static struct uart_driver max3100_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "ttyMAX", - .dev_name = "ttyMAX", - .major = MAX3100_MAJOR, - .minor = MAX3100_MINOR, - .nr = MAX_MAX3100, -}; -static int uart_driver_registered; - -static int __devinit max3100_probe(struct spi_device *spi) -{ - int i, retval; - struct plat_max3100 *pdata; - u16 tx, rx; - - mutex_lock(&max3100s_lock); - - if (!uart_driver_registered) { - uart_driver_registered = 1; - retval = uart_register_driver(&max3100_uart_driver); - if (retval) { - printk(KERN_ERR "Couldn't register max3100 uart driver\n"); - mutex_unlock(&max3100s_lock); - return retval; - } - } - - for (i = 0; i < MAX_MAX3100; i++) - if (!max3100s[i]) - break; - if (i == MAX_MAX3100) { - dev_warn(&spi->dev, "too many MAX3100 chips\n"); - mutex_unlock(&max3100s_lock); - return -ENOMEM; - } - - max3100s[i] = kzalloc(sizeof(struct max3100_port), GFP_KERNEL); - if (!max3100s[i]) { - dev_warn(&spi->dev, - "kmalloc for max3100 structure %d failed!\n", i); - mutex_unlock(&max3100s_lock); - return -ENOMEM; - } - max3100s[i]->spi = spi; - max3100s[i]->irq = spi->irq; - spin_lock_init(&max3100s[i]->conf_lock); - dev_set_drvdata(&spi->dev, max3100s[i]); - pdata = spi->dev.platform_data; - max3100s[i]->crystal = pdata->crystal; - max3100s[i]->loopback = pdata->loopback; - max3100s[i]->poll_time = pdata->poll_time * HZ / 1000; - if (pdata->poll_time > 0 && max3100s[i]->poll_time == 0) - max3100s[i]->poll_time = 1; - max3100s[i]->max3100_hw_suspend = pdata->max3100_hw_suspend; - max3100s[i]->minor = i; - init_timer(&max3100s[i]->timer); - max3100s[i]->timer.function = max3100_timeout; - max3100s[i]->timer.data = (unsigned long) max3100s[i]; - - dev_dbg(&spi->dev, "%s: adding port %d\n", __func__, i); - max3100s[i]->port.irq = max3100s[i]->irq; - max3100s[i]->port.uartclk = max3100s[i]->crystal ? 3686400 : 1843200; - max3100s[i]->port.fifosize = 16; - max3100s[i]->port.ops = &max3100_ops; - max3100s[i]->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; - max3100s[i]->port.line = i; - max3100s[i]->port.type = PORT_MAX3100; - max3100s[i]->port.dev = &spi->dev; - retval = uart_add_one_port(&max3100_uart_driver, &max3100s[i]->port); - if (retval < 0) - dev_warn(&spi->dev, - "uart_add_one_port failed for line %d with error %d\n", - i, retval); - - /* set shutdown mode to save power. Will be woken-up on open */ - if (max3100s[i]->max3100_hw_suspend) - max3100s[i]->max3100_hw_suspend(1); - else { - tx = MAX3100_WC | MAX3100_SHDN; - max3100_sr(max3100s[i], tx, &rx); - } - mutex_unlock(&max3100s_lock); - return 0; -} - -static int __devexit max3100_remove(struct spi_device *spi) -{ - struct max3100_port *s = dev_get_drvdata(&spi->dev); - int i; - - mutex_lock(&max3100s_lock); - - /* find out the index for the chip we are removing */ - for (i = 0; i < MAX_MAX3100; i++) - if (max3100s[i] == s) - break; - - dev_dbg(&spi->dev, "%s: removing port %d\n", __func__, i); - uart_remove_one_port(&max3100_uart_driver, &max3100s[i]->port); - kfree(max3100s[i]); - max3100s[i] = NULL; - - /* check if this is the last chip we have */ - for (i = 0; i < MAX_MAX3100; i++) - if (max3100s[i]) { - mutex_unlock(&max3100s_lock); - return 0; - } - pr_debug("removing max3100 driver\n"); - uart_unregister_driver(&max3100_uart_driver); - - mutex_unlock(&max3100s_lock); - return 0; -} - -#ifdef CONFIG_PM - -static int max3100_suspend(struct spi_device *spi, pm_message_t state) -{ - struct max3100_port *s = dev_get_drvdata(&spi->dev); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - disable_irq(s->irq); - - s->suspending = 1; - uart_suspend_port(&max3100_uart_driver, &s->port); - - if (s->max3100_hw_suspend) - s->max3100_hw_suspend(1); - else { - /* no HW suspend, so do SW one */ - u16 tx, rx; - - tx = MAX3100_WC | MAX3100_SHDN; - max3100_sr(s, tx, &rx); - } - return 0; -} - -static int max3100_resume(struct spi_device *spi) -{ - struct max3100_port *s = dev_get_drvdata(&spi->dev); - - dev_dbg(&s->spi->dev, "%s\n", __func__); - - if (s->max3100_hw_suspend) - s->max3100_hw_suspend(0); - uart_resume_port(&max3100_uart_driver, &s->port); - s->suspending = 0; - - enable_irq(s->irq); - - s->conf_commit = 1; - if (s->workqueue) - max3100_dowork(s); - - return 0; -} - -#else -#define max3100_suspend NULL -#define max3100_resume NULL -#endif - -static struct spi_driver max3100_driver = { - .driver = { - .name = "max3100", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - - .probe = max3100_probe, - .remove = __devexit_p(max3100_remove), - .suspend = max3100_suspend, - .resume = max3100_resume, -}; - -static int __init max3100_init(void) -{ - return spi_register_driver(&max3100_driver); -} -module_init(max3100_init); - -static void __exit max3100_exit(void) -{ - spi_unregister_driver(&max3100_driver); -} -module_exit(max3100_exit); - -MODULE_DESCRIPTION("MAX3100 driver"); -MODULE_AUTHOR("Christian Pellegrin "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("spi:max3100"); diff --git a/drivers/serial/max3107-aava.c b/drivers/serial/max3107-aava.c deleted file mode 100644 index a1fe304f2f52..000000000000 --- a/drivers/serial/max3107-aava.c +++ /dev/null @@ -1,344 +0,0 @@ -/* - * max3107.c - spi uart protocol driver for Maxim 3107 - * Based on max3100.c - * by Christian Pellegrin - * and max3110.c - * by Feng Tang - * - * Copyright (C) Aavamobile 2009 - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "max3107.h" - -/* GPIO direction to input function */ -static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[1]; /* Buffer for SPI transfer */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO configuration register */ - buf[0] = MAX3107_GPIOCFG_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - - /* Set GPIO to input */ - buf[0] &= ~(0x0001 << offset); - - /* Write new GPIO configuration register value */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n"); - return -EIO; - } - return 0; -} - -/* GPIO direction to output function */ -static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset, - int value) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[2]; /* Buffer for SPI transfers */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO configuration and data registers */ - buf[0] = MAX3107_GPIOCFG_REG; - buf[1] = MAX3107_GPIODATA_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { - dev_err(&s->spi->dev, "SPI transfer gpio failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - buf[1] &= MAX3107_SPI_RX_DATA_MASK; - - /* Set GPIO to output */ - buf[0] |= (0x0001 << offset); - /* Set value */ - if (value) - buf[1] |= (0x0001 << offset); - else - buf[1] &= ~(0x0001 << offset); - - /* Write new GPIO configuration and data register values */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); - buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 4)) { - dev_err(&s->spi->dev, - "SPI transfer for GPIO conf data w failed\n"); - return -EIO; - } - return 0; -} - -/* GPIO value query function */ -static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[1]; /* Buffer for SPI transfer */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO data register */ - buf[0] = MAX3107_GPIODATA_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - - /* Return value */ - return buf[0] & (0x0001 << offset); -} - -/* GPIO value set function */ -static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[2]; /* Buffer for SPI transfers */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return; - } - - /* Read current GPIO configuration registers*/ - buf[0] = MAX3107_GPIODATA_REG; - buf[1] = MAX3107_GPIOCFG_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { - dev_err(&s->spi->dev, - "SPI transfer for GPIO data and config read failed\n"); - return; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - buf[1] &= MAX3107_SPI_RX_DATA_MASK; - - if (!(buf[1] & (0x0001 << offset))) { - /* Configured as input, can't set value */ - dev_warn(&s->spi->dev, - "Trying to set value for input GPIO\n"); - return; - } - - /* Set value */ - if (value) - buf[0] |= (0x0001 << offset); - else - buf[0] &= ~(0x0001 << offset); - - /* Write new GPIO data register value */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 2)) - dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n"); -} - -/* GPIO chip data */ -static struct gpio_chip max3107_gpio_chip = { - .owner = THIS_MODULE, - .direction_input = max3107_gpio_direction_in, - .direction_output = max3107_gpio_direction_out, - .get = max3107_gpio_get, - .set = max3107_gpio_set, - .can_sleep = 1, - .base = MAX3107_GPIO_BASE, - .ngpio = MAX3107_GPIO_COUNT, -}; - -/** - * max3107_aava_reset - reset on AAVA systems - * @spi: The SPI device we are probing - * - * Reset the device ready for probing. - */ - -static int max3107_aava_reset(struct spi_device *spi) -{ - /* Reset the chip */ - if (gpio_request(MAX3107_RESET_GPIO, "max3107")) { - pr_err("Requesting RESET GPIO failed\n"); - return -EIO; - } - if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) { - pr_err("Setting RESET GPIO to 0 failed\n"); - gpio_free(MAX3107_RESET_GPIO); - return -EIO; - } - msleep(MAX3107_RESET_DELAY); - if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) { - pr_err("Setting RESET GPIO to 1 failed\n"); - gpio_free(MAX3107_RESET_GPIO); - return -EIO; - } - gpio_free(MAX3107_RESET_GPIO); - msleep(MAX3107_WAKEUP_DELAY); - return 0; -} - -static int max3107_aava_configure(struct max3107_port *s) -{ - int retval; - - /* Initialize GPIO chip data */ - s->chip = max3107_gpio_chip; - s->chip.label = s->spi->modalias; - s->chip.dev = &s->spi->dev; - - /* Add GPIO chip */ - retval = gpiochip_add(&s->chip); - if (retval) { - dev_err(&s->spi->dev, "Adding GPIO chip failed\n"); - return retval; - } - - /* Temporary fix for EV2 boot problems, set modem reset to 0 */ - max3107_gpio_direction_out(&s->chip, 3, 0); - return 0; -} - -#if 0 -/* This will get enabled once we have the board stuff merged for this - specific case */ - -static const struct baud_table brg13_ext[] = { - { 300, MAX3107_BRG13_B300 }, - { 600, MAX3107_BRG13_B600 }, - { 1200, MAX3107_BRG13_B1200 }, - { 2400, MAX3107_BRG13_B2400 }, - { 4800, MAX3107_BRG13_B4800 }, - { 9600, MAX3107_BRG13_B9600 }, - { 19200, MAX3107_BRG13_B19200 }, - { 57600, MAX3107_BRG13_B57600 }, - { 115200, MAX3107_BRG13_B115200 }, - { 230400, MAX3107_BRG13_B230400 }, - { 460800, MAX3107_BRG13_B460800 }, - { 921600, MAX3107_BRG13_B921600 }, - { 0, 0 } -}; - -static void max3107_aava_init(struct max3107_port *s) -{ - /*override for AAVA SC specific*/ - if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) { - if (get_koski_build_id() <= KOSKI_EV2) - if (s->ext_clk) { - s->brg_cfg = MAX3107_BRG13_B9600; - s->baud_tbl = (struct baud_table *)brg13_ext; - } - } -} -#endif - -static int __devexit max3107_aava_remove(struct spi_device *spi) -{ - struct max3107_port *s = dev_get_drvdata(&spi->dev); - - /* Remove GPIO chip */ - if (gpiochip_remove(&s->chip)) - dev_warn(&spi->dev, "Removing GPIO chip failed\n"); - - /* Then do the default remove */ - return max3107_remove(spi); -} - -/* Platform data */ -static struct max3107_plat aava_plat_data = { - .loopback = 0, - .ext_clk = 1, -/* .init = max3107_aava_init, */ - .configure = max3107_aava_configure, - .hw_suspend = max3107_hw_susp, - .polled_mode = 0, - .poll_time = 0, -}; - - -static int __devinit max3107_probe_aava(struct spi_device *spi) -{ - int err = max3107_aava_reset(spi); - if (err < 0) - return err; - return max3107_probe(spi, &aava_plat_data); -} - -/* Spi driver data */ -static struct spi_driver max3107_driver = { - .driver = { - .name = "aava-max3107", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - .probe = max3107_probe_aava, - .remove = __devexit_p(max3107_aava_remove), - .suspend = max3107_suspend, - .resume = max3107_resume, -}; - -/* Driver init function */ -static int __init max3107_init(void) -{ - return spi_register_driver(&max3107_driver); -} - -/* Driver exit function */ -static void __exit max3107_exit(void) -{ - spi_unregister_driver(&max3107_driver); -} - -module_init(max3107_init); -module_exit(max3107_exit); - -MODULE_DESCRIPTION("MAX3107 driver"); -MODULE_AUTHOR("Aavamobile"); -MODULE_ALIAS("aava-max3107-spi"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/serial/max3107.c b/drivers/serial/max3107.c deleted file mode 100644 index 910870edf708..000000000000 --- a/drivers/serial/max3107.c +++ /dev/null @@ -1,1213 +0,0 @@ -/* - * max3107.c - spi uart protocol driver for Maxim 3107 - * Based on max3100.c - * by Christian Pellegrin - * and max3110.c - * by Feng Tang - * - * Copyright (C) Aavamobile 2009 - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include "max3107.h" - -static const struct baud_table brg26_ext[] = { - { 300, MAX3107_BRG26_B300 }, - { 600, MAX3107_BRG26_B600 }, - { 1200, MAX3107_BRG26_B1200 }, - { 2400, MAX3107_BRG26_B2400 }, - { 4800, MAX3107_BRG26_B4800 }, - { 9600, MAX3107_BRG26_B9600 }, - { 19200, MAX3107_BRG26_B19200 }, - { 57600, MAX3107_BRG26_B57600 }, - { 115200, MAX3107_BRG26_B115200 }, - { 230400, MAX3107_BRG26_B230400 }, - { 460800, MAX3107_BRG26_B460800 }, - { 921600, MAX3107_BRG26_B921600 }, - { 0, 0 } -}; - -static const struct baud_table brg13_int[] = { - { 300, MAX3107_BRG13_IB300 }, - { 600, MAX3107_BRG13_IB600 }, - { 1200, MAX3107_BRG13_IB1200 }, - { 2400, MAX3107_BRG13_IB2400 }, - { 4800, MAX3107_BRG13_IB4800 }, - { 9600, MAX3107_BRG13_IB9600 }, - { 19200, MAX3107_BRG13_IB19200 }, - { 57600, MAX3107_BRG13_IB57600 }, - { 115200, MAX3107_BRG13_IB115200 }, - { 230400, MAX3107_BRG13_IB230400 }, - { 460800, MAX3107_BRG13_IB460800 }, - { 921600, MAX3107_BRG13_IB921600 }, - { 0, 0 } -}; - -static u32 get_new_brg(int baud, struct max3107_port *s) -{ - int i; - const struct baud_table *baud_tbl = s->baud_tbl; - - for (i = 0; i < 13; i++) { - if (baud == baud_tbl[i].baud) - return baud_tbl[i].new_brg; - } - - return 0; -} - -/* Perform SPI transfer for write/read of device register(s) */ -int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len) -{ - struct spi_message spi_msg; - struct spi_transfer spi_xfer; - - /* Initialize SPI ,message */ - spi_message_init(&spi_msg); - - /* Initialize SPI transfer */ - memset(&spi_xfer, 0, sizeof spi_xfer); - spi_xfer.len = len; - spi_xfer.tx_buf = tx; - spi_xfer.rx_buf = rx; - spi_xfer.speed_hz = MAX3107_SPI_SPEED; - - /* Add SPI transfer to SPI message */ - spi_message_add_tail(&spi_xfer, &spi_msg); - -#ifdef DBG_TRACE_SPI_DATA - { - int i; - pr_info("tx len %d:\n", spi_xfer.len); - for (i = 0 ; i < spi_xfer.len && i < 32 ; i++) - pr_info(" %x", ((u8 *)spi_xfer.tx_buf)[i]); - pr_info("\n"); - } -#endif - - /* Perform synchronous SPI transfer */ - if (spi_sync(s->spi, &spi_msg)) { - dev_err(&s->spi->dev, "spi_sync failure\n"); - return -EIO; - } - -#ifdef DBG_TRACE_SPI_DATA - if (spi_xfer.rx_buf) { - int i; - pr_info("rx len %d:\n", spi_xfer.len); - for (i = 0 ; i < spi_xfer.len && i < 32 ; i++) - pr_info(" %x", ((u8 *)spi_xfer.rx_buf)[i]); - pr_info("\n"); - } -#endif - return 0; -} -EXPORT_SYMBOL_GPL(max3107_rw); - -/* Puts received data to circular buffer */ -static void put_data_to_circ_buf(struct max3107_port *s, unsigned char *data, - int len) -{ - struct uart_port *port = &s->port; - struct tty_struct *tty; - - if (!port->state) - return; - - tty = port->state->port.tty; - if (!tty) - return; - - /* Insert received data */ - tty_insert_flip_string(tty, data, len); - /* Update RX counter */ - port->icount.rx += len; -} - -/* Handle data receiving */ -static void max3107_handlerx(struct max3107_port *s, u16 rxlvl) -{ - int i; - int j; - int len; /* SPI transfer buffer length */ - u16 *buf; - u8 *valid_str; - - if (!s->rx_enabled) - /* RX is disabled */ - return; - - if (rxlvl == 0) { - /* RX fifo is empty */ - return; - } else if (rxlvl >= MAX3107_RX_FIFO_SIZE) { - dev_warn(&s->spi->dev, "Possible RX FIFO overrun %d\n", rxlvl); - /* Ensure sanity of RX level */ - rxlvl = MAX3107_RX_FIFO_SIZE; - } - if ((s->rxbuf == 0) || (s->rxstr == 0)) { - dev_warn(&s->spi->dev, "Rx buffer/str isn't ready\n"); - return; - } - buf = s->rxbuf; - valid_str = s->rxstr; - while (rxlvl) { - pr_debug("rxlvl %d\n", rxlvl); - /* Clear buffer */ - memset(buf, 0, sizeof(u16) * (MAX3107_RX_FIFO_SIZE + 2)); - len = 0; - if (s->irqen_reg & MAX3107_IRQ_RXFIFO_BIT) { - /* First disable RX FIFO interrupt */ - pr_debug("Disabling RX INT\n"); - buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); - s->irqen_reg &= ~MAX3107_IRQ_RXFIFO_BIT; - buf[0] |= s->irqen_reg; - len++; - } - /* Just increase the length by amount of words in FIFO since - * buffer was zeroed and SPI transfer of 0x0000 means reading - * from RX FIFO - */ - len += rxlvl; - /* Append RX level query */ - buf[len] = MAX3107_RXFIFOLVL_REG; - len++; - - /* Perform the SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, len * 2)) { - dev_err(&s->spi->dev, "SPI transfer for RX h failed\n"); - return; - } - - /* Skip RX FIFO interrupt disabling word if it was added */ - j = ((len - 1) - rxlvl); - /* Read received words */ - for (i = 0; i < rxlvl; i++, j++) - valid_str[i] = (u8)buf[j]; - put_data_to_circ_buf(s, valid_str, rxlvl); - /* Get new RX level */ - rxlvl = (buf[len - 1] & MAX3107_SPI_RX_DATA_MASK); - } - - if (s->rx_enabled) { - /* RX still enabled, re-enable RX FIFO interrupt */ - pr_debug("Enabling RX INT\n"); - buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); - s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT; - buf[0] |= s->irqen_reg; - if (max3107_rw(s, (u8 *)buf, NULL, 2)) - dev_err(&s->spi->dev, "RX FIFO INT enabling failed\n"); - } - - /* Push the received data to receivers */ - if (s->port.state->port.tty) - tty_flip_buffer_push(s->port.state->port.tty); -} - - -/* Handle data sending */ -static void max3107_handletx(struct max3107_port *s) -{ - struct circ_buf *xmit = &s->port.state->xmit; - int i; - unsigned long flags; - int len; /* SPI transfer buffer length */ - u16 *buf; - - if (!s->tx_fifo_empty) - /* Don't send more data before previous data is sent */ - return; - - if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port)) - /* No data to send or TX is stopped */ - return; - - if (!s->txbuf) { - dev_warn(&s->spi->dev, "Txbuf isn't ready\n"); - return; - } - buf = s->txbuf; - /* Get length of data pending in circular buffer */ - len = uart_circ_chars_pending(xmit); - if (len) { - /* Limit to size of TX FIFO */ - if (len > MAX3107_TX_FIFO_SIZE) - len = MAX3107_TX_FIFO_SIZE; - - pr_debug("txlen %d\n", len); - - /* Update TX counter */ - s->port.icount.tx += len; - - /* TX FIFO will no longer be empty */ - s->tx_fifo_empty = 0; - - i = 0; - if (s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT) { - /* First disable TX empty interrupt */ - pr_debug("Disabling TE INT\n"); - buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); - s->irqen_reg &= ~MAX3107_IRQ_TXEMPTY_BIT; - buf[i] |= s->irqen_reg; - i++; - len++; - } - /* Add data to send */ - spin_lock_irqsave(&s->port.lock, flags); - for ( ; i < len ; i++) { - buf[i] = (MAX3107_WRITE_BIT | MAX3107_THR_REG); - buf[i] |= ((u16)xmit->buf[xmit->tail] & - MAX3107_SPI_TX_DATA_MASK); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - } - spin_unlock_irqrestore(&s->port.lock, flags); - if (!(s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT)) { - /* Enable TX empty interrupt */ - pr_debug("Enabling TE INT\n"); - buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); - s->irqen_reg |= MAX3107_IRQ_TXEMPTY_BIT; - buf[i] |= s->irqen_reg; - i++; - len++; - } - if (!s->tx_enabled) { - /* Enable TX */ - pr_debug("Enable TX\n"); - buf[i] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); - spin_lock_irqsave(&s->data_lock, flags); - s->mode1_reg &= ~MAX3107_MODE1_TXDIS_BIT; - buf[i] |= s->mode1_reg; - spin_unlock_irqrestore(&s->data_lock, flags); - s->tx_enabled = 1; - i++; - len++; - } - - /* Perform the SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, len*2)) { - dev_err(&s->spi->dev, - "SPI transfer TX handling failed\n"); - return; - } - } - - /* Indicate wake up if circular buffer is getting low on data */ - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&s->port); - -} - -/* Handle interrupts - * Also reads and returns current RX FIFO level - */ -static u16 handle_interrupt(struct max3107_port *s) -{ - u16 buf[4]; /* Buffer for SPI transfers */ - u8 irq_status; - u16 rx_level; - unsigned long flags; - - /* Read IRQ status register */ - buf[0] = MAX3107_IRQSTS_REG; - /* Read status IRQ status register */ - buf[1] = MAX3107_STS_IRQSTS_REG; - /* Read LSR IRQ status register */ - buf[2] = MAX3107_LSR_IRQSTS_REG; - /* Query RX level */ - buf[3] = MAX3107_RXFIFOLVL_REG; - - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 8)) { - dev_err(&s->spi->dev, - "SPI transfer for INTR handling failed\n"); - return 0; - } - - irq_status = (u8)buf[0]; - pr_debug("IRQSTS %x\n", irq_status); - rx_level = (buf[3] & MAX3107_SPI_RX_DATA_MASK); - - if (irq_status & MAX3107_IRQ_LSR_BIT) { - /* LSR interrupt */ - if (buf[2] & MAX3107_LSR_RXTO_BIT) - /* RX timeout interrupt, - * handled by normal RX handling - */ - pr_debug("RX TO INT\n"); - } - - if (irq_status & MAX3107_IRQ_TXEMPTY_BIT) { - /* Tx empty interrupt, - * disable TX and set tx_fifo_empty flag - */ - pr_debug("TE INT, disabling TX\n"); - buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); - spin_lock_irqsave(&s->data_lock, flags); - s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT; - buf[0] |= s->mode1_reg; - spin_unlock_irqrestore(&s->data_lock, flags); - if (max3107_rw(s, (u8 *)buf, NULL, 2)) - dev_err(&s->spi->dev, "SPI transfer TX dis failed\n"); - s->tx_enabled = 0; - s->tx_fifo_empty = 1; - } - - if (irq_status & MAX3107_IRQ_RXFIFO_BIT) - /* RX FIFO interrupt, - * handled by normal RX handling - */ - pr_debug("RFIFO INT\n"); - - /* Return RX level */ - return rx_level; -} - -/* Trigger work thread*/ -static void max3107_dowork(struct max3107_port *s) -{ - if (!work_pending(&s->work) && !freezing(current) && !s->suspended) - queue_work(s->workqueue, &s->work); - else - dev_warn(&s->spi->dev, "interrup isn't serviced normally!\n"); -} - -/* Work thread */ -static void max3107_work(struct work_struct *w) -{ - struct max3107_port *s = container_of(w, struct max3107_port, work); - u16 rxlvl = 0; - int len; /* SPI transfer buffer length */ - u16 buf[5]; /* Buffer for SPI transfers */ - unsigned long flags; - - /* Start by reading current RX FIFO level */ - buf[0] = MAX3107_RXFIFOLVL_REG; - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer RX lev failed\n"); - rxlvl = 0; - } else { - rxlvl = (buf[0] & MAX3107_SPI_RX_DATA_MASK); - } - - do { - pr_debug("rxlvl %d\n", rxlvl); - - /* Handle RX */ - max3107_handlerx(s, rxlvl); - rxlvl = 0; - - if (s->handle_irq) { - /* Handle pending interrupts - * We also get new RX FIFO level since new data may - * have been received while pushing received data to - * receivers - */ - s->handle_irq = 0; - rxlvl = handle_interrupt(s); - } - - /* Handle TX */ - max3107_handletx(s); - - /* Handle configuration changes */ - len = 0; - spin_lock_irqsave(&s->data_lock, flags); - if (s->mode1_commit) { - pr_debug("mode1_commit\n"); - buf[len] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); - buf[len++] |= s->mode1_reg; - s->mode1_commit = 0; - } - if (s->lcr_commit) { - pr_debug("lcr_commit\n"); - buf[len] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG); - buf[len++] |= s->lcr_reg; - s->lcr_commit = 0; - } - if (s->brg_commit) { - pr_debug("brg_commit\n"); - buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG); - buf[len++] |= ((s->brg_cfg >> 16) & - MAX3107_SPI_TX_DATA_MASK); - buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG); - buf[len++] |= ((s->brg_cfg >> 8) & - MAX3107_SPI_TX_DATA_MASK); - buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG); - buf[len++] |= ((s->brg_cfg) & 0xff); - s->brg_commit = 0; - } - spin_unlock_irqrestore(&s->data_lock, flags); - - if (len > 0) { - if (max3107_rw(s, (u8 *)buf, NULL, len * 2)) - dev_err(&s->spi->dev, - "SPI transfer config failed\n"); - } - - /* Reloop if interrupt handling indicated data in RX FIFO */ - } while (rxlvl); - -} - -/* Set sleep mode */ -static void max3107_set_sleep(struct max3107_port *s, int mode) -{ - u16 buf[1]; /* Buffer for SPI transfer */ - unsigned long flags; - pr_debug("enter, mode %d\n", mode); - - buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); - spin_lock_irqsave(&s->data_lock, flags); - switch (mode) { - case MAX3107_DISABLE_FORCED_SLEEP: - s->mode1_reg &= ~MAX3107_MODE1_FORCESLEEP_BIT; - break; - case MAX3107_ENABLE_FORCED_SLEEP: - s->mode1_reg |= MAX3107_MODE1_FORCESLEEP_BIT; - break; - case MAX3107_DISABLE_AUTOSLEEP: - s->mode1_reg &= ~MAX3107_MODE1_AUTOSLEEP_BIT; - break; - case MAX3107_ENABLE_AUTOSLEEP: - s->mode1_reg |= MAX3107_MODE1_AUTOSLEEP_BIT; - break; - default: - spin_unlock_irqrestore(&s->data_lock, flags); - dev_warn(&s->spi->dev, "invalid sleep mode\n"); - return; - } - buf[0] |= s->mode1_reg; - spin_unlock_irqrestore(&s->data_lock, flags); - - if (max3107_rw(s, (u8 *)buf, NULL, 2)) - dev_err(&s->spi->dev, "SPI transfer sleep mode failed\n"); - - if (mode == MAX3107_DISABLE_AUTOSLEEP || - mode == MAX3107_DISABLE_FORCED_SLEEP) - msleep(MAX3107_WAKEUP_DELAY); -} - -/* Perform full register initialization */ -static void max3107_register_init(struct max3107_port *s) -{ - u16 buf[11]; /* Buffer for SPI transfers */ - - /* 1. Configure baud rate, 9600 as default */ - s->baud = 9600; - /* the below is default*/ - if (s->ext_clk) { - s->brg_cfg = MAX3107_BRG26_B9600; - s->baud_tbl = (struct baud_table *)brg26_ext; - } else { - s->brg_cfg = MAX3107_BRG13_IB9600; - s->baud_tbl = (struct baud_table *)brg13_int; - } - - if (s->pdata->init) - s->pdata->init(s); - - buf[0] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG) - | ((s->brg_cfg >> 16) & MAX3107_SPI_TX_DATA_MASK); - buf[1] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG) - | ((s->brg_cfg >> 8) & MAX3107_SPI_TX_DATA_MASK); - buf[2] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG) - | ((s->brg_cfg) & 0xff); - - /* 2. Configure LCR register, 8N1 mode by default */ - s->lcr_reg = MAX3107_LCR_WORD_LEN_8; - buf[3] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG) - | s->lcr_reg; - - /* 3. Configure MODE 1 register */ - s->mode1_reg = 0; - /* Enable IRQ pin */ - s->mode1_reg |= MAX3107_MODE1_IRQSEL_BIT; - /* Disable TX */ - s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT; - s->tx_enabled = 0; - /* RX is enabled */ - s->rx_enabled = 1; - buf[4] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG) - | s->mode1_reg; - - /* 4. Configure MODE 2 register */ - buf[5] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG); - if (s->loopback) { - /* Enable loopback */ - buf[5] |= MAX3107_MODE2_LOOPBACK_BIT; - } - /* Reset FIFOs */ - buf[5] |= MAX3107_MODE2_FIFORST_BIT; - s->tx_fifo_empty = 1; - - /* 5. Configure FIFO trigger level register */ - buf[6] = (MAX3107_WRITE_BIT | MAX3107_FIFOTRIGLVL_REG); - /* RX FIFO trigger for 16 words, TX FIFO trigger not used */ - buf[6] |= (MAX3107_FIFOTRIGLVL_RX(16) | MAX3107_FIFOTRIGLVL_TX(0)); - - /* 6. Configure flow control levels */ - buf[7] = (MAX3107_WRITE_BIT | MAX3107_FLOWLVL_REG); - /* Flow control halt level 96, resume level 48 */ - buf[7] |= (MAX3107_FLOWLVL_RES(48) | MAX3107_FLOWLVL_HALT(96)); - - /* 7. Configure flow control */ - buf[8] = (MAX3107_WRITE_BIT | MAX3107_FLOWCTRL_REG); - /* Enable auto CTS and auto RTS flow control */ - buf[8] |= (MAX3107_FLOWCTRL_AUTOCTS_BIT | MAX3107_FLOWCTRL_AUTORTS_BIT); - - /* 8. Configure RX timeout register */ - buf[9] = (MAX3107_WRITE_BIT | MAX3107_RXTO_REG); - /* Timeout after 48 character intervals */ - buf[9] |= 0x0030; - - /* 9. Configure LSR interrupt enable register */ - buf[10] = (MAX3107_WRITE_BIT | MAX3107_LSR_IRQEN_REG); - /* Enable RX timeout interrupt */ - buf[10] |= MAX3107_LSR_RXTO_BIT; - - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 22)) - dev_err(&s->spi->dev, "SPI transfer for init failed\n"); - - /* 10. Clear IRQ status register by reading it */ - buf[0] = MAX3107_IRQSTS_REG; - - /* 11. Configure interrupt enable register */ - /* Enable LSR interrupt */ - s->irqen_reg = MAX3107_IRQ_LSR_BIT; - /* Enable RX FIFO interrupt */ - s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT; - buf[1] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG) - | s->irqen_reg; - - /* 12. Clear FIFO reset that was set in step 6 */ - buf[2] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG); - if (s->loopback) { - /* Keep loopback enabled */ - buf[2] |= MAX3107_MODE2_LOOPBACK_BIT; - } - - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 6)) - dev_err(&s->spi->dev, "SPI transfer for init failed\n"); - -} - -/* IRQ handler */ -static irqreturn_t max3107_irq(int irqno, void *dev_id) -{ - struct max3107_port *s = dev_id; - - if (irqno != s->spi->irq) { - /* Unexpected IRQ */ - return IRQ_NONE; - } - - /* Indicate irq */ - s->handle_irq = 1; - - /* Trigger work thread */ - max3107_dowork(s); - - return IRQ_HANDLED; -} - -/* HW suspension function - * - * Currently autosleep is used to decrease current consumption, alternative - * approach would be to set the chip to reset mode if UART is not being - * used but that would mess the GPIOs - * - */ -void max3107_hw_susp(struct max3107_port *s, int suspend) -{ - pr_debug("enter, suspend %d\n", suspend); - - if (suspend) { - /* Suspend requested, - * enable autosleep to decrease current consumption - */ - s->suspended = 1; - max3107_set_sleep(s, MAX3107_ENABLE_AUTOSLEEP); - } else { - /* Resume requested, - * disable autosleep - */ - s->suspended = 0; - max3107_set_sleep(s, MAX3107_DISABLE_AUTOSLEEP); - } -} -EXPORT_SYMBOL_GPL(max3107_hw_susp); - -/* Modem status IRQ enabling */ -static void max3107_enable_ms(struct uart_port *port) -{ - /* Modem status not supported */ -} - -/* Data send function */ -static void max3107_start_tx(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - - /* Trigger work thread for sending data */ - max3107_dowork(s); -} - -/* Function for checking that there is no pending transfers */ -static unsigned int max3107_tx_empty(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - - pr_debug("returning %d\n", - (s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit))); - return s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit); -} - -/* Function for stopping RX */ -static void max3107_stop_rx(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - unsigned long flags; - - /* Set RX disabled in MODE 1 register */ - spin_lock_irqsave(&s->data_lock, flags); - s->mode1_reg |= MAX3107_MODE1_RXDIS_BIT; - s->mode1_commit = 1; - spin_unlock_irqrestore(&s->data_lock, flags); - /* Set RX disabled */ - s->rx_enabled = 0; - /* Trigger work thread for doing the actual configuration change */ - max3107_dowork(s); -} - -/* Function for returning control pin states */ -static unsigned int max3107_get_mctrl(struct uart_port *port) -{ - /* DCD and DSR are not wired and CTS/RTS is handled automatically - * so just indicate DSR and CAR asserted - */ - return TIOCM_DSR | TIOCM_CAR; -} - -/* Function for setting control pin states */ -static void max3107_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* DCD and DSR are not wired and CTS/RTS is hadnled automatically - * so do nothing - */ -} - -/* Function for configuring UART parameters */ -static void max3107_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - struct tty_struct *tty; - int baud; - u16 new_lcr = 0; - u32 new_brg = 0; - unsigned long flags; - - if (!port->state) - return; - - tty = port->state->port.tty; - if (!tty) - return; - - /* Get new LCR register values */ - /* Word size */ - if ((termios->c_cflag & CSIZE) == CS7) - new_lcr |= MAX3107_LCR_WORD_LEN_7; - else - new_lcr |= MAX3107_LCR_WORD_LEN_8; - - /* Parity */ - if (termios->c_cflag & PARENB) { - new_lcr |= MAX3107_LCR_PARITY_BIT; - if (!(termios->c_cflag & PARODD)) - new_lcr |= MAX3107_LCR_EVENPARITY_BIT; - } - - /* Stop bits */ - if (termios->c_cflag & CSTOPB) { - /* 2 stop bits */ - new_lcr |= MAX3107_LCR_STOPLEN_BIT; - } - - /* Mask termios capabilities we don't support */ - termios->c_cflag &= ~CMSPAR; - - /* Set status ignore mask */ - s->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - s->port.ignore_status_mask |= MAX3107_ALL_ERRORS; - - /* Set low latency to immediately handle pushed data */ - s->port.state->port.tty->low_latency = 1; - - /* Get new baud rate generator configuration */ - baud = tty_get_baud_rate(tty); - - spin_lock_irqsave(&s->data_lock, flags); - new_brg = get_new_brg(baud, s); - /* if can't find the corrent config, use previous */ - if (!new_brg) { - baud = s->baud; - new_brg = s->brg_cfg; - } - spin_unlock_irqrestore(&s->data_lock, flags); - tty_termios_encode_baud_rate(termios, baud, baud); - s->baud = baud; - - /* Update timeout according to new baud rate */ - uart_update_timeout(port, termios->c_cflag, baud); - - spin_lock_irqsave(&s->data_lock, flags); - if (s->lcr_reg != new_lcr) { - s->lcr_reg = new_lcr; - s->lcr_commit = 1; - } - if (s->brg_cfg != new_brg) { - s->brg_cfg = new_brg; - s->brg_commit = 1; - } - spin_unlock_irqrestore(&s->data_lock, flags); - - /* Trigger work thread for doing the actual configuration change */ - max3107_dowork(s); -} - -/* Port shutdown function */ -static void max3107_shutdown(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - - if (s->suspended && s->pdata->hw_suspend) - s->pdata->hw_suspend(s, 0); - - /* Free the interrupt */ - free_irq(s->spi->irq, s); - - if (s->workqueue) { - /* Flush and destroy work queue */ - flush_workqueue(s->workqueue); - destroy_workqueue(s->workqueue); - s->workqueue = NULL; - } - - /* Suspend HW */ - if (s->pdata->hw_suspend) - s->pdata->hw_suspend(s, 1); -} - -/* Port startup function */ -static int max3107_startup(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - - /* Initialize work queue */ - s->workqueue = create_freezeable_workqueue("max3107"); - if (!s->workqueue) { - dev_err(&s->spi->dev, "Workqueue creation failed\n"); - return -EBUSY; - } - INIT_WORK(&s->work, max3107_work); - - /* Setup IRQ */ - if (request_irq(s->spi->irq, max3107_irq, IRQF_TRIGGER_FALLING, - "max3107", s)) { - dev_err(&s->spi->dev, "IRQ reguest failed\n"); - destroy_workqueue(s->workqueue); - s->workqueue = NULL; - return -EBUSY; - } - - /* Resume HW */ - if (s->pdata->hw_suspend) - s->pdata->hw_suspend(s, 0); - - /* Init registers */ - max3107_register_init(s); - - return 0; -} - -/* Port type function */ -static const char *max3107_type(struct uart_port *port) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - return s->spi->modalias; -} - -/* Port release function */ -static void max3107_release_port(struct uart_port *port) -{ - /* Do nothing */ -} - -/* Port request function */ -static int max3107_request_port(struct uart_port *port) -{ - /* Do nothing */ - return 0; -} - -/* Port config function */ -static void max3107_config_port(struct uart_port *port, int flags) -{ - struct max3107_port *s = container_of(port, struct max3107_port, port); - s->port.type = PORT_MAX3107; -} - -/* Port verify function */ -static int max3107_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3107) - return 0; - - return -EINVAL; -} - -/* Port stop TX function */ -static void max3107_stop_tx(struct uart_port *port) -{ - /* Do nothing */ -} - -/* Port break control function */ -static void max3107_break_ctl(struct uart_port *port, int break_state) -{ - /* We don't support break control, do nothing */ -} - - -/* Port functions */ -static struct uart_ops max3107_ops = { - .tx_empty = max3107_tx_empty, - .set_mctrl = max3107_set_mctrl, - .get_mctrl = max3107_get_mctrl, - .stop_tx = max3107_stop_tx, - .start_tx = max3107_start_tx, - .stop_rx = max3107_stop_rx, - .enable_ms = max3107_enable_ms, - .break_ctl = max3107_break_ctl, - .startup = max3107_startup, - .shutdown = max3107_shutdown, - .set_termios = max3107_set_termios, - .type = max3107_type, - .release_port = max3107_release_port, - .request_port = max3107_request_port, - .config_port = max3107_config_port, - .verify_port = max3107_verify_port, -}; - -/* UART driver data */ -static struct uart_driver max3107_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "ttyMAX", - .dev_name = "ttyMAX", - .nr = 1, -}; - -static int driver_registered = 0; - - - -/* 'Generic' platform data */ -static struct max3107_plat generic_plat_data = { - .loopback = 0, - .ext_clk = 1, - .hw_suspend = max3107_hw_susp, - .polled_mode = 0, - .poll_time = 0, -}; - - -/*******************************************************************/ - -/** - * max3107_probe - SPI bus probe entry point - * @spi: the spi device - * - * SPI wants us to probe this device and if appropriate claim it. - * Perform any platform specific requirements and then initialise - * the device. - */ - -int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata) -{ - struct max3107_port *s; - u16 buf[2]; /* Buffer for SPI transfers */ - int retval; - - pr_info("enter max3107 probe\n"); - - /* Allocate port structure */ - s = kzalloc(sizeof(*s), GFP_KERNEL); - if (!s) { - pr_err("Allocating port structure failed\n"); - return -ENOMEM; - } - - s->pdata = pdata; - - /* SPI Rx buffer - * +2 for RX FIFO interrupt - * disabling and RX level query - */ - s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL); - if (!s->rxbuf) { - pr_err("Allocating RX buffer failed\n"); - retval = -ENOMEM; - goto err_free4; - } - s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL); - if (!s->rxstr) { - pr_err("Allocating RX buffer failed\n"); - retval = -ENOMEM; - goto err_free3; - } - /* SPI Tx buffer - * SPI transfer buffer - * +3 for TX FIFO empty - * interrupt disabling and - * enabling and TX enabling - */ - s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL); - if (!s->txbuf) { - pr_err("Allocating TX buffer failed\n"); - retval = -ENOMEM; - goto err_free2; - } - /* Initialize shared data lock */ - spin_lock_init(&s->data_lock); - - /* SPI intializations */ - dev_set_drvdata(&spi->dev, s); - spi->mode = SPI_MODE_0; - spi->dev.platform_data = pdata; - spi->bits_per_word = 16; - s->ext_clk = pdata->ext_clk; - s->loopback = pdata->loopback; - spi_setup(spi); - s->spi = spi; - - /* Check REV ID to ensure we are talking to what we expect */ - buf[0] = MAX3107_REVID_REG; - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n"); - retval = -EIO; - goto err_free1; - } - if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 && - (buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) { - dev_err(&s->spi->dev, "REVID %x does not match\n", - (buf[0] & MAX3107_SPI_RX_DATA_MASK)); - retval = -ENODEV; - goto err_free1; - } - - /* Disable all interrupts */ - buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG | 0x0000); - buf[0] |= 0x0000; - - /* Configure clock source */ - buf[1] = (MAX3107_WRITE_BIT | MAX3107_CLKSRC_REG); - if (s->ext_clk) { - /* External clock */ - buf[1] |= MAX3107_CLKSRC_EXTCLK_BIT; - } - - /* PLL bypass ON */ - buf[1] |= MAX3107_CLKSRC_PLLBYP_BIT; - - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 4)) { - dev_err(&s->spi->dev, "SPI transfer for init failed\n"); - retval = -EIO; - goto err_free1; - } - - /* Register UART driver */ - if (!driver_registered) { - retval = uart_register_driver(&max3107_uart_driver); - if (retval) { - dev_err(&s->spi->dev, "Registering UART driver failed\n"); - goto err_free1; - } - driver_registered = 1; - } - - /* Initialize UART port data */ - s->port.fifosize = 128; - s->port.ops = &max3107_ops; - s->port.line = 0; - s->port.dev = &spi->dev; - s->port.uartclk = 9600; - s->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; - s->port.irq = s->spi->irq; - s->port.type = PORT_MAX3107; - - /* Add UART port */ - retval = uart_add_one_port(&max3107_uart_driver, &s->port); - if (retval < 0) { - dev_err(&s->spi->dev, "Adding UART port failed\n"); - goto err_free1; - } - - if (pdata->configure) { - retval = pdata->configure(s); - if (retval < 0) - goto err_free1; - } - - /* Go to suspend mode */ - if (pdata->hw_suspend) - pdata->hw_suspend(s, 1); - - return 0; - -err_free1: - kfree(s->txbuf); -err_free2: - kfree(s->rxstr); -err_free3: - kfree(s->rxbuf); -err_free4: - kfree(s); - return retval; -} -EXPORT_SYMBOL_GPL(max3107_probe); - -/* Driver remove function */ -int max3107_remove(struct spi_device *spi) -{ - struct max3107_port *s = dev_get_drvdata(&spi->dev); - - pr_info("enter max3107 remove\n"); - - /* Remove port */ - if (uart_remove_one_port(&max3107_uart_driver, &s->port)) - dev_warn(&s->spi->dev, "Removing UART port failed\n"); - - - /* Free TxRx buffer */ - kfree(s->rxbuf); - kfree(s->rxstr); - kfree(s->txbuf); - - /* Free port structure */ - kfree(s); - - return 0; -} -EXPORT_SYMBOL_GPL(max3107_remove); - -/* Driver suspend function */ -int max3107_suspend(struct spi_device *spi, pm_message_t state) -{ -#ifdef CONFIG_PM - struct max3107_port *s = dev_get_drvdata(&spi->dev); - - pr_debug("enter suspend\n"); - - /* Suspend UART port */ - uart_suspend_port(&max3107_uart_driver, &s->port); - - /* Go to suspend mode */ - if (s->pdata->hw_suspend) - s->pdata->hw_suspend(s, 1); -#endif /* CONFIG_PM */ - return 0; -} -EXPORT_SYMBOL_GPL(max3107_suspend); - -/* Driver resume function */ -int max3107_resume(struct spi_device *spi) -{ -#ifdef CONFIG_PM - struct max3107_port *s = dev_get_drvdata(&spi->dev); - - pr_debug("enter resume\n"); - - /* Resume from suspend */ - if (s->pdata->hw_suspend) - s->pdata->hw_suspend(s, 0); - - /* Resume UART port */ - uart_resume_port(&max3107_uart_driver, &s->port); -#endif /* CONFIG_PM */ - return 0; -} -EXPORT_SYMBOL_GPL(max3107_resume); - -static int max3107_probe_generic(struct spi_device *spi) -{ - return max3107_probe(spi, &generic_plat_data); -} - -/* Spi driver data */ -static struct spi_driver max3107_driver = { - .driver = { - .name = "max3107", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - .probe = max3107_probe_generic, - .remove = __devexit_p(max3107_remove), - .suspend = max3107_suspend, - .resume = max3107_resume, -}; - -/* Driver init function */ -static int __init max3107_init(void) -{ - pr_info("enter max3107 init\n"); - return spi_register_driver(&max3107_driver); -} - -/* Driver exit function */ -static void __exit max3107_exit(void) -{ - pr_info("enter max3107 exit\n"); - /* Unregister UART driver */ - if (driver_registered) - uart_unregister_driver(&max3107_uart_driver); - spi_unregister_driver(&max3107_driver); -} - -module_init(max3107_init); -module_exit(max3107_exit); - -MODULE_DESCRIPTION("MAX3107 driver"); -MODULE_AUTHOR("Aavamobile"); -MODULE_ALIAS("max3107-spi"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/serial/max3107.h b/drivers/serial/max3107.h deleted file mode 100644 index 7ab632392502..000000000000 --- a/drivers/serial/max3107.h +++ /dev/null @@ -1,441 +0,0 @@ -/* - * max3107.h - spi uart protocol driver header for Maxim 3107 - * - * Copyright (C) Aavamobile 2009 - * Based on serial_max3100.h by Christian Pellegrin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef _MAX3107_H -#define _MAX3107_H - -/* Serial error status definitions */ -#define MAX3107_PARITY_ERROR 1 -#define MAX3107_FRAME_ERROR 2 -#define MAX3107_OVERRUN_ERROR 4 -#define MAX3107_ALL_ERRORS (MAX3107_PARITY_ERROR | \ - MAX3107_FRAME_ERROR | \ - MAX3107_OVERRUN_ERROR) - -/* GPIO definitions */ -#define MAX3107_GPIO_BASE 88 -#define MAX3107_GPIO_COUNT 4 - - -/* GPIO connected to chip's reset pin */ -#define MAX3107_RESET_GPIO 87 - - -/* Chip reset delay */ -#define MAX3107_RESET_DELAY 10 - -/* Chip wakeup delay */ -#define MAX3107_WAKEUP_DELAY 50 - - -/* Sleep mode definitions */ -#define MAX3107_DISABLE_FORCED_SLEEP 0 -#define MAX3107_ENABLE_FORCED_SLEEP 1 -#define MAX3107_DISABLE_AUTOSLEEP 2 -#define MAX3107_ENABLE_AUTOSLEEP 3 - - -/* Definitions for register access with SPI transfers - * - * SPI transfer format: - * - * Master to slave bits xzzzzzzzyyyyyyyy - * Slave to master bits aaaaaaaabbbbbbbb - * - * where: - * x = 0 for reads, 1 for writes - * z = register address - * y = new register value if write, 0 if read - * a = unspecified - * b = register value if read, unspecified if write - */ - -/* SPI speed */ -#define MAX3107_SPI_SPEED (3125000 * 2) - -/* Write bit */ -#define MAX3107_WRITE_BIT (1 << 15) - -/* SPI TX data mask */ -#define MAX3107_SPI_RX_DATA_MASK (0x00ff) - -/* SPI RX data mask */ -#define MAX3107_SPI_TX_DATA_MASK (0x00ff) - -/* Register access masks */ -#define MAX3107_RHR_REG (0x0000) /* RX FIFO */ -#define MAX3107_THR_REG (0x0000) /* TX FIFO */ -#define MAX3107_IRQEN_REG (0x0100) /* IRQ enable */ -#define MAX3107_IRQSTS_REG (0x0200) /* IRQ status */ -#define MAX3107_LSR_IRQEN_REG (0x0300) /* LSR IRQ enable */ -#define MAX3107_LSR_IRQSTS_REG (0x0400) /* LSR IRQ status */ -#define MAX3107_SPCHR_IRQEN_REG (0x0500) /* Special char IRQ enable */ -#define MAX3107_SPCHR_IRQSTS_REG (0x0600) /* Special char IRQ status */ -#define MAX3107_STS_IRQEN_REG (0x0700) /* Status IRQ enable */ -#define MAX3107_STS_IRQSTS_REG (0x0800) /* Status IRQ status */ -#define MAX3107_MODE1_REG (0x0900) /* MODE1 */ -#define MAX3107_MODE2_REG (0x0a00) /* MODE2 */ -#define MAX3107_LCR_REG (0x0b00) /* LCR */ -#define MAX3107_RXTO_REG (0x0c00) /* RX timeout */ -#define MAX3107_HDPIXDELAY_REG (0x0d00) /* Auto transceiver delays */ -#define MAX3107_IRDA_REG (0x0e00) /* IRDA settings */ -#define MAX3107_FLOWLVL_REG (0x0f00) /* Flow control levels */ -#define MAX3107_FIFOTRIGLVL_REG (0x1000) /* FIFO IRQ trigger levels */ -#define MAX3107_TXFIFOLVL_REG (0x1100) /* TX FIFO level */ -#define MAX3107_RXFIFOLVL_REG (0x1200) /* RX FIFO level */ -#define MAX3107_FLOWCTRL_REG (0x1300) /* Flow control */ -#define MAX3107_XON1_REG (0x1400) /* XON1 character */ -#define MAX3107_XON2_REG (0x1500) /* XON2 character */ -#define MAX3107_XOFF1_REG (0x1600) /* XOFF1 character */ -#define MAX3107_XOFF2_REG (0x1700) /* XOFF2 character */ -#define MAX3107_GPIOCFG_REG (0x1800) /* GPIO config */ -#define MAX3107_GPIODATA_REG (0x1900) /* GPIO data */ -#define MAX3107_PLLCFG_REG (0x1a00) /* PLL config */ -#define MAX3107_BRGCFG_REG (0x1b00) /* Baud rate generator conf */ -#define MAX3107_BRGDIVLSB_REG (0x1c00) /* Baud rate divisor LSB */ -#define MAX3107_BRGDIVMSB_REG (0x1d00) /* Baud rate divisor MSB */ -#define MAX3107_CLKSRC_REG (0x1e00) /* Clock source */ -#define MAX3107_REVID_REG (0x1f00) /* Revision identification */ - -/* IRQ register bits */ -#define MAX3107_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */ -#define MAX3107_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */ -#define MAX3107_IRQ_STS_BIT (1 << 2) /* Status interrupt */ -#define MAX3107_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */ -#define MAX3107_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */ -#define MAX3107_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */ -#define MAX3107_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */ -#define MAX3107_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */ - -/* LSR register bits */ -#define MAX3107_LSR_RXTO_BIT (1 << 0) /* RX timeout */ -#define MAX3107_LSR_RXOVR_BIT (1 << 1) /* RX overrun */ -#define MAX3107_LSR_RXPAR_BIT (1 << 2) /* RX parity error */ -#define MAX3107_LSR_FRERR_BIT (1 << 3) /* Frame error */ -#define MAX3107_LSR_RXBRK_BIT (1 << 4) /* RX break */ -#define MAX3107_LSR_RXNOISE_BIT (1 << 5) /* RX noise */ -#define MAX3107_LSR_UNDEF6_BIT (1 << 6) /* Undefined/not used */ -#define MAX3107_LSR_CTS_BIT (1 << 7) /* CTS pin state */ - -/* Special character register bits */ -#define MAX3107_SPCHR_XON1_BIT (1 << 0) /* XON1 character */ -#define MAX3107_SPCHR_XON2_BIT (1 << 1) /* XON2 character */ -#define MAX3107_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */ -#define MAX3107_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */ -#define MAX3107_SPCHR_BREAK_BIT (1 << 4) /* RX break */ -#define MAX3107_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */ -#define MAX3107_SPCHR_UNDEF6_BIT (1 << 6) /* Undefined/not used */ -#define MAX3107_SPCHR_UNDEF7_BIT (1 << 7) /* Undefined/not used */ - -/* Status register bits */ -#define MAX3107_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */ -#define MAX3107_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */ -#define MAX3107_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */ -#define MAX3107_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */ -#define MAX3107_STS_UNDEF4_BIT (1 << 4) /* Undefined/not used */ -#define MAX3107_STS_CLKREADY_BIT (1 << 5) /* Clock ready */ -#define MAX3107_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */ -#define MAX3107_STS_UNDEF7_BIT (1 << 7) /* Undefined/not used */ - -/* MODE1 register bits */ -#define MAX3107_MODE1_RXDIS_BIT (1 << 0) /* RX disable */ -#define MAX3107_MODE1_TXDIS_BIT (1 << 1) /* TX disable */ -#define MAX3107_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */ -#define MAX3107_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */ -#define MAX3107_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */ -#define MAX3107_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */ -#define MAX3107_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */ -#define MAX3107_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */ - -/* MODE2 register bits */ -#define MAX3107_MODE2_RST_BIT (1 << 0) /* Chip reset */ -#define MAX3107_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */ -#define MAX3107_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */ -#define MAX3107_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */ -#define MAX3107_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */ -#define MAX3107_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */ -#define MAX3107_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */ -#define MAX3107_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */ - -/* LCR register bits */ -#define MAX3107_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */ -#define MAX3107_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1 - * - * Word length bits table: - * 00 -> 5 bit words - * 01 -> 6 bit words - * 10 -> 7 bit words - * 11 -> 8 bit words - */ -#define MAX3107_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit - * - * STOP length bit table: - * 0 -> 1 stop bit - * 1 -> 1-1.5 stop bits if - * word length is 5, - * 2 stop bits otherwise - */ -#define MAX3107_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */ -#define MAX3107_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */ -#define MAX3107_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */ -#define MAX3107_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */ -#define MAX3107_LCR_RTS_BIT (1 << 7) /* RTS pin control */ -#define MAX3107_LCR_WORD_LEN_5 (0x0000) -#define MAX3107_LCR_WORD_LEN_6 (0x0001) -#define MAX3107_LCR_WORD_LEN_7 (0x0002) -#define MAX3107_LCR_WORD_LEN_8 (0x0003) - - -/* IRDA register bits */ -#define MAX3107_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */ -#define MAX3107_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */ -#define MAX3107_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */ -#define MAX3107_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */ -#define MAX3107_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */ -#define MAX3107_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */ -#define MAX3107_IRDA_UNDEF6_BIT (1 << 6) /* Undefined/not used */ -#define MAX3107_IRDA_UNDEF7_BIT (1 << 7) /* Undefined/not used */ - -/* Flow control trigger level register masks */ -#define MAX3107_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */ -#define MAX3107_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */ -#define MAX3107_FLOWLVL_HALT(words) ((words/8) & 0x000f) -#define MAX3107_FLOWLVL_RES(words) (((words/8) & 0x000f) << 4) - -/* FIFO interrupt trigger level register masks */ -#define MAX3107_FIFOTRIGLVL_TX_MASK (0x000f) /* TX FIFO trigger level */ -#define MAX3107_FIFOTRIGLVL_RX_MASK (0x00f0) /* RX FIFO trigger level */ -#define MAX3107_FIFOTRIGLVL_TX(words) ((words/8) & 0x000f) -#define MAX3107_FIFOTRIGLVL_RX(words) (((words/8) & 0x000f) << 4) - -/* Flow control register bits */ -#define MAX3107_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */ -#define MAX3107_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */ -#define MAX3107_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs - * are used in conjunction with - * XOFF2 for definition of - * special character */ -#define MAX3107_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */ -#define MAX3107_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */ -#define MAX3107_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1 - * - * SWFLOW bits 1 & 0 table: - * 00 -> no transmitter flow - * control - * 01 -> receiver compares - * XON2 and XOFF2 - * and controls - * transmitter - * 10 -> receiver compares - * XON1 and XOFF1 - * and controls - * transmitter - * 11 -> receiver compares - * XON1, XON2, XOFF1 and - * XOFF2 and controls - * transmitter - */ -#define MAX3107_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */ -#define MAX3107_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3 - * - * SWFLOW bits 3 & 2 table: - * 00 -> no received flow - * control - * 01 -> transmitter generates - * XON2 and XOFF2 - * 10 -> transmitter generates - * XON1 and XOFF1 - * 11 -> transmitter generates - * XON1, XON2, XOFF1 and - * XOFF2 - */ - -/* GPIO configuration register bits */ -#define MAX3107_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */ -#define MAX3107_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */ -#define MAX3107_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */ -#define MAX3107_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */ -#define MAX3107_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */ -#define MAX3107_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */ -#define MAX3107_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */ -#define MAX3107_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */ - -/* GPIO DATA register bits */ -#define MAX3107_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */ -#define MAX3107_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */ -#define MAX3107_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */ -#define MAX3107_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */ -#define MAX3107_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */ -#define MAX3107_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */ -#define MAX3107_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */ -#define MAX3107_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */ - -/* PLL configuration register masks */ -#define MAX3107_PLLCFG_PREDIV_MASK (0x003f) /* PLL predivision value */ -#define MAX3107_PLLCFG_PLLFACTOR_MASK (0x00c0) /* PLL multiplication factor */ - -/* Baud rate generator configuration register masks and bits */ -#define MAX3107_BRGCFG_FRACT_MASK (0x000f) /* Fractional portion of - * Baud rate generator divisor - */ -#define MAX3107_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */ -#define MAX3107_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */ -#define MAX3107_BRGCFG_UNDEF6_BIT (1 << 6) /* Undefined/not used */ -#define MAX3107_BRGCFG_UNDEF7_BIT (1 << 7) /* Undefined/not used */ - -/* Clock source register bits */ -#define MAX3107_CLKSRC_INTOSC_BIT (1 << 0) /* Internal osc enable */ -#define MAX3107_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */ -#define MAX3107_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */ -#define MAX3107_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */ -#define MAX3107_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */ -#define MAX3107_CLKSRC_UNDEF5_BIT (1 << 5) /* Undefined/not used */ -#define MAX3107_CLKSRC_UNDEF6_BIT (1 << 6) /* Undefined/not used */ -#define MAX3107_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */ - - -/* HW definitions */ -#define MAX3107_RX_FIFO_SIZE 128 -#define MAX3107_TX_FIFO_SIZE 128 -#define MAX3107_REVID1 0x00a0 -#define MAX3107_REVID2 0x00a1 - - -/* Baud rate generator configuration values for external clock 13MHz */ -#define MAX3107_BRG13_B300 (0x0A9400 | 0x05) -#define MAX3107_BRG13_B600 (0x054A00 | 0x03) -#define MAX3107_BRG13_B1200 (0x02A500 | 0x01) -#define MAX3107_BRG13_B2400 (0x015200 | 0x09) -#define MAX3107_BRG13_B4800 (0x00A900 | 0x04) -#define MAX3107_BRG13_B9600 (0x005400 | 0x0A) -#define MAX3107_BRG13_B19200 (0x002A00 | 0x05) -#define MAX3107_BRG13_B38400 (0x001500 | 0x03) -#define MAX3107_BRG13_B57600 (0x000E00 | 0x02) -#define MAX3107_BRG13_B115200 (0x000700 | 0x01) -#define MAX3107_BRG13_B230400 (0x000300 | 0x08) -#define MAX3107_BRG13_B460800 (0x000100 | 0x0c) -#define MAX3107_BRG13_B921600 (0x000100 | 0x1c) - -/* Baud rate generator configuration values for external clock 26MHz */ -#define MAX3107_BRG26_B300 (0x152800 | 0x0A) -#define MAX3107_BRG26_B600 (0x0A9400 | 0x05) -#define MAX3107_BRG26_B1200 (0x054A00 | 0x03) -#define MAX3107_BRG26_B2400 (0x02A500 | 0x01) -#define MAX3107_BRG26_B4800 (0x015200 | 0x09) -#define MAX3107_BRG26_B9600 (0x00A900 | 0x04) -#define MAX3107_BRG26_B19200 (0x005400 | 0x0A) -#define MAX3107_BRG26_B38400 (0x002A00 | 0x05) -#define MAX3107_BRG26_B57600 (0x001C00 | 0x03) -#define MAX3107_BRG26_B115200 (0x000E00 | 0x02) -#define MAX3107_BRG26_B230400 (0x000700 | 0x01) -#define MAX3107_BRG26_B460800 (0x000300 | 0x08) -#define MAX3107_BRG26_B921600 (0x000100 | 0x0C) - -/* Baud rate generator configuration values for internal clock */ -#define MAX3107_BRG13_IB300 (0x008000 | 0x00) -#define MAX3107_BRG13_IB600 (0x004000 | 0x00) -#define MAX3107_BRG13_IB1200 (0x002000 | 0x00) -#define MAX3107_BRG13_IB2400 (0x001000 | 0x00) -#define MAX3107_BRG13_IB4800 (0x000800 | 0x00) -#define MAX3107_BRG13_IB9600 (0x000400 | 0x00) -#define MAX3107_BRG13_IB19200 (0x000200 | 0x00) -#define MAX3107_BRG13_IB38400 (0x000100 | 0x00) -#define MAX3107_BRG13_IB57600 (0x000000 | 0x0B) -#define MAX3107_BRG13_IB115200 (0x000000 | 0x05) -#define MAX3107_BRG13_IB230400 (0x000000 | 0x03) -#define MAX3107_BRG13_IB460800 (0x000000 | 0x00) -#define MAX3107_BRG13_IB921600 (0x000000 | 0x00) - - -struct baud_table { - int baud; - u32 new_brg; -}; - -struct max3107_port { - /* UART port structure */ - struct uart_port port; - - /* SPI device structure */ - struct spi_device *spi; - -#if defined(CONFIG_GPIOLIB) - /* GPIO chip stucture */ - struct gpio_chip chip; -#endif - - /* Workqueue that does all the magic */ - struct workqueue_struct *workqueue; - struct work_struct work; - - /* Lock for shared data */ - spinlock_t data_lock; - - /* Device configuration */ - int ext_clk; /* 1 if external clock used */ - int loopback; /* Current loopback mode state */ - int baud; /* Current baud rate */ - - /* State flags */ - int suspended; /* Indicates suspend mode */ - int tx_fifo_empty; /* Flag for TX FIFO state */ - int rx_enabled; /* Flag for receiver state */ - int tx_enabled; /* Flag for transmitter state */ - - u16 irqen_reg; /* Current IRQ enable register value */ - /* Shared data */ - u16 mode1_reg; /* Current mode1 register value*/ - int mode1_commit; /* Flag for setting new mode1 register value */ - u16 lcr_reg; /* Current LCR register value */ - int lcr_commit; /* Flag for setting new LCR register value */ - u32 brg_cfg; /* Current Baud rate generator config */ - int brg_commit; /* Flag for setting new baud rate generator - * config - */ - struct baud_table *baud_tbl; - int handle_irq; /* Indicates that IRQ should be handled */ - - /* Rx buffer and str*/ - u16 *rxbuf; - u8 *rxstr; - /* Tx buffer*/ - u16 *txbuf; - - struct max3107_plat *pdata; /* Platform data */ -}; - -/* Platform data structure */ -struct max3107_plat { - /* Loopback mode enable */ - int loopback; - /* External clock enable */ - int ext_clk; - /* Called during the register initialisation */ - void (*init)(struct max3107_port *s); - /* Called when the port is found and configured */ - int (*configure)(struct max3107_port *s); - /* HW suspend function */ - void (*hw_suspend) (struct max3107_port *s, int suspend); - /* Polling mode enable */ - int polled_mode; - /* Polling period if polling mode enabled */ - int poll_time; -}; - -extern int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len); -extern void max3107_hw_susp(struct max3107_port *s, int suspend); -extern int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata); -extern int max3107_remove(struct spi_device *spi); -extern int max3107_suspend(struct spi_device *spi, pm_message_t state); -extern int max3107_resume(struct spi_device *spi); - -#endif /* _LINUX_SERIAL_MAX3107_H */ diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c deleted file mode 100644 index 3394b7cc1722..000000000000 --- a/drivers/serial/mcf.c +++ /dev/null @@ -1,662 +0,0 @@ -/****************************************************************************/ - -/* - * mcf.c -- Freescale ColdFire UART driver - * - * (C) Copyright 2003-2007, Greg Ungerer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -/****************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/****************************************************************************/ - -/* - * Some boards implement the DTR/DCD lines using GPIO lines, most - * don't. Dummy out the access macros for those that don't. Those - * that do should define these macros somewhere in there board - * specific inlude files. - */ -#if !defined(mcf_getppdcd) -#define mcf_getppdcd(p) (1) -#endif -#if !defined(mcf_getppdtr) -#define mcf_getppdtr(p) (1) -#endif -#if !defined(mcf_setppdtr) -#define mcf_setppdtr(p, v) do { } while (0) -#endif - -/****************************************************************************/ - -/* - * Local per-uart structure. - */ -struct mcf_uart { - struct uart_port port; - unsigned int sigs; /* Local copy of line sigs */ - unsigned char imr; /* Local IMR mirror */ -}; - -/****************************************************************************/ - -static unsigned int mcf_tx_empty(struct uart_port *port) -{ - return (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXEMPTY) ? - TIOCSER_TEMT : 0; -} - -/****************************************************************************/ - -static unsigned int mcf_get_mctrl(struct uart_port *port) -{ - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned int sigs; - - sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ? - 0 : TIOCM_CTS; - sigs |= (pp->sigs & TIOCM_RTS); - sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0); - sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0); - - return sigs; -} - -/****************************************************************************/ - -static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs) -{ - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - - pp->sigs = sigs; - mcf_setppdtr(port->line, (sigs & TIOCM_DTR)); - if (sigs & TIOCM_RTS) - writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1); - else - writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0); -} - -/****************************************************************************/ - -static void mcf_start_tx(struct uart_port *port) -{ - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - - pp->imr |= MCFUART_UIR_TXREADY; - writeb(pp->imr, port->membase + MCFUART_UIMR); -} - -/****************************************************************************/ - -static void mcf_stop_tx(struct uart_port *port) -{ - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - - pp->imr &= ~MCFUART_UIR_TXREADY; - writeb(pp->imr, port->membase + MCFUART_UIMR); -} - -/****************************************************************************/ - -static void mcf_stop_rx(struct uart_port *port) -{ - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - - pp->imr &= ~MCFUART_UIR_RXREADY; - writeb(pp->imr, port->membase + MCFUART_UIMR); -} - -/****************************************************************************/ - -static void mcf_break_ctl(struct uart_port *port, int break_state) -{ - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - if (break_state == -1) - writeb(MCFUART_UCR_CMDBREAKSTART, port->membase + MCFUART_UCR); - else - writeb(MCFUART_UCR_CMDBREAKSTOP, port->membase + MCFUART_UCR); - spin_unlock_irqrestore(&port->lock, flags); -} - -/****************************************************************************/ - -static void mcf_enable_ms(struct uart_port *port) -{ -} - -/****************************************************************************/ - -static int mcf_startup(struct uart_port *port) -{ - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - - /* Reset UART, get it into known state... */ - writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); - writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); - - /* Enable the UART transmitter and receiver */ - writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, - port->membase + MCFUART_UCR); - - /* Enable RX interrupts now */ - pp->imr = MCFUART_UIR_RXREADY; - writeb(pp->imr, port->membase + MCFUART_UIMR); - - spin_unlock_irqrestore(&port->lock, flags); - - return 0; -} - -/****************************************************************************/ - -static void mcf_shutdown(struct uart_port *port) -{ - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - - /* Disable all interrupts now */ - pp->imr = 0; - writeb(pp->imr, port->membase + MCFUART_UIMR); - - /* Disable UART transmitter and receiver */ - writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); - writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); - - spin_unlock_irqrestore(&port->lock, flags); -} - -/****************************************************************************/ - -static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned long flags; - unsigned int baud, baudclk; -#if defined(CONFIG_M5272) - unsigned int baudfr; -#endif - unsigned char mr1, mr2; - - baud = uart_get_baud_rate(port, termios, old, 0, 230400); -#if defined(CONFIG_M5272) - baudclk = (MCF_BUSCLK / baud) / 32; - baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16; -#else - baudclk = ((MCF_BUSCLK / baud) + 16) / 32; -#endif - - mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR; - mr2 = 0; - - switch (termios->c_cflag & CSIZE) { - case CS5: mr1 |= MCFUART_MR1_CS5; break; - case CS6: mr1 |= MCFUART_MR1_CS6; break; - case CS7: mr1 |= MCFUART_MR1_CS7; break; - case CS8: - default: mr1 |= MCFUART_MR1_CS8; break; - } - - if (termios->c_cflag & PARENB) { - if (termios->c_cflag & CMSPAR) { - if (termios->c_cflag & PARODD) - mr1 |= MCFUART_MR1_PARITYMARK; - else - mr1 |= MCFUART_MR1_PARITYSPACE; - } else { - if (termios->c_cflag & PARODD) - mr1 |= MCFUART_MR1_PARITYODD; - else - mr1 |= MCFUART_MR1_PARITYEVEN; - } - } else { - mr1 |= MCFUART_MR1_PARITYNONE; - } - - if (termios->c_cflag & CSTOPB) - mr2 |= MCFUART_MR2_STOP2; - else - mr2 |= MCFUART_MR2_STOP1; - - if (termios->c_cflag & CRTSCTS) { - mr1 |= MCFUART_MR1_RXRTS; - mr2 |= MCFUART_MR2_TXCTS; - } - - spin_lock_irqsave(&port->lock, flags); - uart_update_timeout(port, termios->c_cflag, baud); - writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); - writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); - writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR); - writeb(mr1, port->membase + MCFUART_UMR); - writeb(mr2, port->membase + MCFUART_UMR); - writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1); - writeb((baudclk & 0xff), port->membase + MCFUART_UBG2); -#if defined(CONFIG_M5272) - writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD); -#endif - writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER, - port->membase + MCFUART_UCSR); - writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, - port->membase + MCFUART_UCR); - spin_unlock_irqrestore(&port->lock, flags); -} - -/****************************************************************************/ - -static void mcf_rx_chars(struct mcf_uart *pp) -{ - struct uart_port *port = &pp->port; - unsigned char status, ch, flag; - - while ((status = readb(port->membase + MCFUART_USR)) & MCFUART_USR_RXREADY) { - ch = readb(port->membase + MCFUART_URB); - flag = TTY_NORMAL; - port->icount.rx++; - - if (status & MCFUART_USR_RXERR) { - writeb(MCFUART_UCR_CMDRESETERR, - port->membase + MCFUART_UCR); - - if (status & MCFUART_USR_RXBREAK) { - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } else if (status & MCFUART_USR_RXPARITY) { - port->icount.parity++; - } else if (status & MCFUART_USR_RXOVERRUN) { - port->icount.overrun++; - } else if (status & MCFUART_USR_RXFRAMING) { - port->icount.frame++; - } - - status &= port->read_status_mask; - - if (status & MCFUART_USR_RXBREAK) - flag = TTY_BREAK; - else if (status & MCFUART_USR_RXPARITY) - flag = TTY_PARITY; - else if (status & MCFUART_USR_RXFRAMING) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, ch)) - continue; - uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag); - } - - tty_flip_buffer_push(port->state->port.tty); -} - -/****************************************************************************/ - -static void mcf_tx_chars(struct mcf_uart *pp) -{ - struct uart_port *port = &pp->port; - struct circ_buf *xmit = &port->state->xmit; - - if (port->x_char) { - /* Send special char - probably flow control */ - writeb(port->x_char, port->membase + MCFUART_UTB); - port->x_char = 0; - port->icount.tx++; - return; - } - - while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) { - if (xmit->head == xmit->tail) - break; - writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (xmit->head == xmit->tail) { - pp->imr &= ~MCFUART_UIR_TXREADY; - writeb(pp->imr, port->membase + MCFUART_UIMR); - } -} - -/****************************************************************************/ - -static irqreturn_t mcf_interrupt(int irq, void *data) -{ - struct uart_port *port = data; - struct mcf_uart *pp = container_of(port, struct mcf_uart, port); - unsigned int isr; - irqreturn_t ret = IRQ_NONE; - - isr = readb(port->membase + MCFUART_UISR) & pp->imr; - - spin_lock(&port->lock); - if (isr & MCFUART_UIR_RXREADY) { - mcf_rx_chars(pp); - ret = IRQ_HANDLED; - } - if (isr & MCFUART_UIR_TXREADY) { - mcf_tx_chars(pp); - ret = IRQ_HANDLED; - } - spin_unlock(&port->lock); - - return ret; -} - -/****************************************************************************/ - -static void mcf_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_MCF; - port->fifosize = MCFUART_TXFIFOSIZE; - - /* Clear mask, so no surprise interrupts. */ - writeb(0, port->membase + MCFUART_UIMR); - - if (request_irq(port->irq, mcf_interrupt, IRQF_DISABLED, "UART", port)) - printk(KERN_ERR "MCF: unable to attach ColdFire UART %d " - "interrupt vector=%d\n", port->line, port->irq); -} - -/****************************************************************************/ - -static const char *mcf_type(struct uart_port *port) -{ - return (port->type == PORT_MCF) ? "ColdFire UART" : NULL; -} - -/****************************************************************************/ - -static int mcf_request_port(struct uart_port *port) -{ - /* UARTs always present */ - return 0; -} - -/****************************************************************************/ - -static void mcf_release_port(struct uart_port *port) -{ - /* Nothing to release... */ -} - -/****************************************************************************/ - -static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_MCF)) - return -EINVAL; - return 0; -} - -/****************************************************************************/ - -/* - * Define the basic serial functions we support. - */ -static const struct uart_ops mcf_uart_ops = { - .tx_empty = mcf_tx_empty, - .get_mctrl = mcf_get_mctrl, - .set_mctrl = mcf_set_mctrl, - .start_tx = mcf_start_tx, - .stop_tx = mcf_stop_tx, - .stop_rx = mcf_stop_rx, - .enable_ms = mcf_enable_ms, - .break_ctl = mcf_break_ctl, - .startup = mcf_startup, - .shutdown = mcf_shutdown, - .set_termios = mcf_set_termios, - .type = mcf_type, - .request_port = mcf_request_port, - .release_port = mcf_release_port, - .config_port = mcf_config_port, - .verify_port = mcf_verify_port, -}; - -static struct mcf_uart mcf_ports[4]; - -#define MCF_MAXPORTS ARRAY_SIZE(mcf_ports) - -/****************************************************************************/ -#if defined(CONFIG_SERIAL_MCF_CONSOLE) -/****************************************************************************/ - -int __init early_mcf_setup(struct mcf_platform_uart *platp) -{ - struct uart_port *port; - int i; - - for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) { - port = &mcf_ports[i].port; - - port->line = i; - port->type = PORT_MCF; - port->mapbase = platp[i].mapbase; - port->membase = (platp[i].membase) ? platp[i].membase : - (unsigned char __iomem *) port->mapbase; - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->uartclk = MCF_BUSCLK; - port->flags = ASYNC_BOOT_AUTOCONF; - port->ops = &mcf_uart_ops; - } - - return 0; -} - -/****************************************************************************/ - -static void mcf_console_putc(struct console *co, const char c) -{ - struct uart_port *port = &(mcf_ports + co->index)->port; - int i; - - for (i = 0; (i < 0x10000); i++) { - if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) - break; - } - writeb(c, port->membase + MCFUART_UTB); - for (i = 0; (i < 0x10000); i++) { - if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) - break; - } -} - -/****************************************************************************/ - -static void mcf_console_write(struct console *co, const char *s, unsigned int count) -{ - for (; (count); count--, s++) { - mcf_console_putc(co, *s); - if (*s == '\n') - mcf_console_putc(co, '\r'); - } -} - -/****************************************************************************/ - -static int __init mcf_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = CONFIG_SERIAL_MCF_BAUDRATE; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if ((co->index < 0) || (co->index >= MCF_MAXPORTS)) - co->index = 0; - port = &mcf_ports[co->index].port; - if (port->membase == 0) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -/****************************************************************************/ - -static struct uart_driver mcf_driver; - -static struct console mcf_console = { - .name = "ttyS", - .write = mcf_console_write, - .device = uart_console_device, - .setup = mcf_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &mcf_driver, -}; - -static int __init mcf_console_init(void) -{ - register_console(&mcf_console); - return 0; -} - -console_initcall(mcf_console_init); - -#define MCF_CONSOLE &mcf_console - -/****************************************************************************/ -#else -/****************************************************************************/ - -#define MCF_CONSOLE NULL - -/****************************************************************************/ -#endif /* CONFIG_MCF_CONSOLE */ -/****************************************************************************/ - -/* - * Define the mcf UART driver structure. - */ -static struct uart_driver mcf_driver = { - .owner = THIS_MODULE, - .driver_name = "mcf", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = MCF_MAXPORTS, - .cons = MCF_CONSOLE, -}; - -/****************************************************************************/ - -static int __devinit mcf_probe(struct platform_device *pdev) -{ - struct mcf_platform_uart *platp = pdev->dev.platform_data; - struct uart_port *port; - int i; - - for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) { - port = &mcf_ports[i].port; - - port->line = i; - port->type = PORT_MCF; - port->mapbase = platp[i].mapbase; - port->membase = (platp[i].membase) ? platp[i].membase : - (unsigned char __iomem *) platp[i].mapbase; - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->uartclk = MCF_BUSCLK; - port->ops = &mcf_uart_ops; - port->flags = ASYNC_BOOT_AUTOCONF; - - uart_add_one_port(&mcf_driver, port); - } - - return 0; -} - -/****************************************************************************/ - -static int __devexit mcf_remove(struct platform_device *pdev) -{ - struct uart_port *port; - int i; - - for (i = 0; (i < MCF_MAXPORTS); i++) { - port = &mcf_ports[i].port; - if (port) - uart_remove_one_port(&mcf_driver, port); - } - - return 0; -} - -/****************************************************************************/ - -static struct platform_driver mcf_platform_driver = { - .probe = mcf_probe, - .remove = __devexit_p(mcf_remove), - .driver = { - .name = "mcfuart", - .owner = THIS_MODULE, - }, -}; - -/****************************************************************************/ - -static int __init mcf_init(void) -{ - int rc; - - printk("ColdFire internal UART serial driver\n"); - - rc = uart_register_driver(&mcf_driver); - if (rc) - return rc; - rc = platform_driver_register(&mcf_platform_driver); - if (rc) - return rc; - return 0; -} - -/****************************************************************************/ - -static void __exit mcf_exit(void) -{ - platform_driver_unregister(&mcf_platform_driver); - uart_unregister_driver(&mcf_driver); -} - -/****************************************************************************/ - -module_init(mcf_init); -module_exit(mcf_exit); - -MODULE_AUTHOR("Greg Ungerer "); -MODULE_DESCRIPTION("Freescale ColdFire UART driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:mcfuart"); - -/****************************************************************************/ diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c deleted file mode 100644 index d40010a22ecd..000000000000 --- a/drivers/serial/mfd.c +++ /dev/null @@ -1,1513 +0,0 @@ -/* - * mfd.c: driver for High Speed UART device of Intel Medfield platform - * - * Refer pxa.c, 8250.c and some other drivers in drivers/serial/ - * - * (C) Copyright 2010 Intel Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; version 2 - * of the License. - */ - -/* Notes: - * 1. DMA channel allocation: 0/1 channel are assigned to port 0, - * 2/3 chan to port 1, 4/5 chan to port 3. Even number chans - * are used for RX, odd chans for TX - * - * 2. In A0 stepping, UART will not support TX half empty flag - * - * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always - * asserted, only when the HW is reset the DDCD and DDSR will - * be triggered - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MFD_HSU_A0_STEPPING 1 - -#define HSU_DMA_BUF_SIZE 2048 - -#define chan_readl(chan, offset) readl(chan->reg + offset) -#define chan_writel(chan, offset, val) writel(val, chan->reg + offset) - -#define mfd_readl(obj, offset) readl(obj->reg + offset) -#define mfd_writel(obj, offset, val) writel(val, obj->reg + offset) - -#define HSU_DMA_TIMEOUT_CHECK_FREQ (HZ/10) - -struct hsu_dma_buffer { - u8 *buf; - dma_addr_t dma_addr; - u32 dma_size; - u32 ofs; -}; - -struct hsu_dma_chan { - u32 id; - enum dma_data_direction dirt; - struct uart_hsu_port *uport; - void __iomem *reg; - struct timer_list rx_timer; /* only needed by RX channel */ -}; - -struct uart_hsu_port { - struct uart_port port; - unsigned char ier; - unsigned char lcr; - unsigned char mcr; - unsigned int lsr_break_flag; - char name[12]; - int index; - struct device *dev; - - struct hsu_dma_chan *txc; - struct hsu_dma_chan *rxc; - struct hsu_dma_buffer txbuf; - struct hsu_dma_buffer rxbuf; - int use_dma; /* flag for DMA/PIO */ - int running; - int dma_tx_on; -}; - -/* Top level data structure of HSU */ -struct hsu_port { - void __iomem *reg; - unsigned long paddr; - unsigned long iolen; - u32 irq; - - struct uart_hsu_port port[3]; - struct hsu_dma_chan chans[10]; - - struct dentry *debugfs; -}; - -static inline unsigned int serial_in(struct uart_hsu_port *up, int offset) -{ - unsigned int val; - - if (offset > UART_MSR) { - offset <<= 2; - val = readl(up->port.membase + offset); - } else - val = (unsigned int)readb(up->port.membase + offset); - - return val; -} - -static inline void serial_out(struct uart_hsu_port *up, int offset, int value) -{ - if (offset > UART_MSR) { - offset <<= 2; - writel(value, up->port.membase + offset); - } else { - unsigned char val = value & 0xff; - writeb(val, up->port.membase + offset); - } -} - -#ifdef CONFIG_DEBUG_FS - -#define HSU_REGS_BUFSIZE 1024 - -static int hsu_show_regs_open(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - -static ssize_t port_show_regs(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct uart_hsu_port *up = file->private_data; - char *buf; - u32 len = 0; - ssize_t ret; - - buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL); - if (!buf) - return 0; - - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MFD HSU port[%d] regs:\n", up->index); - - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "=================================\n"); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "IER: \t\t0x%08x\n", serial_in(up, UART_IER)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "IIR: \t\t0x%08x\n", serial_in(up, UART_IIR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "LCR: \t\t0x%08x\n", serial_in(up, UART_LCR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MCR: \t\t0x%08x\n", serial_in(up, UART_MCR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "LSR: \t\t0x%08x\n", serial_in(up, UART_LSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MSR: \t\t0x%08x\n", serial_in(up, UART_MSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "FOR: \t\t0x%08x\n", serial_in(up, UART_FOR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "PS: \t\t0x%08x\n", serial_in(up, UART_PS)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MUL: \t\t0x%08x\n", serial_in(up, UART_MUL)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "DIV: \t\t0x%08x\n", serial_in(up, UART_DIV)); - - if (len > HSU_REGS_BUFSIZE) - len = HSU_REGS_BUFSIZE; - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); - kfree(buf); - return ret; -} - -static ssize_t dma_show_regs(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct hsu_dma_chan *chan = file->private_data; - char *buf; - u32 len = 0; - ssize_t ret; - - buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL); - if (!buf) - return 0; - - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MFD HSU DMA channel [%d] regs:\n", chan->id); - - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "=================================\n"); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "CR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_CR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "DCR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_DCR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "BSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_BSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "MOTSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_MOTSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0SAR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0TSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1SAR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1TSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2SAR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2TSR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3SAR)); - len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, - "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR)); - - if (len > HSU_REGS_BUFSIZE) - len = HSU_REGS_BUFSIZE; - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); - kfree(buf); - return ret; -} - -static const struct file_operations port_regs_ops = { - .owner = THIS_MODULE, - .open = hsu_show_regs_open, - .read = port_show_regs, - .llseek = default_llseek, -}; - -static const struct file_operations dma_regs_ops = { - .owner = THIS_MODULE, - .open = hsu_show_regs_open, - .read = dma_show_regs, - .llseek = default_llseek, -}; - -static int hsu_debugfs_init(struct hsu_port *hsu) -{ - int i; - char name[32]; - - hsu->debugfs = debugfs_create_dir("hsu", NULL); - if (!hsu->debugfs) - return -ENOMEM; - - for (i = 0; i < 3; i++) { - snprintf(name, sizeof(name), "port_%d_regs", i); - debugfs_create_file(name, S_IFREG | S_IRUGO, - hsu->debugfs, (void *)(&hsu->port[i]), &port_regs_ops); - } - - for (i = 0; i < 6; i++) { - snprintf(name, sizeof(name), "dma_chan_%d_regs", i); - debugfs_create_file(name, S_IFREG | S_IRUGO, - hsu->debugfs, (void *)&hsu->chans[i], &dma_regs_ops); - } - - return 0; -} - -static void hsu_debugfs_remove(struct hsu_port *hsu) -{ - if (hsu->debugfs) - debugfs_remove_recursive(hsu->debugfs); -} - -#else -static inline int hsu_debugfs_init(struct hsu_port *hsu) -{ - return 0; -} - -static inline void hsu_debugfs_remove(struct hsu_port *hsu) -{ -} -#endif /* CONFIG_DEBUG_FS */ - -static void serial_hsu_enable_ms(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); -} - -void hsu_dma_tx(struct uart_hsu_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - struct hsu_dma_buffer *dbuf = &up->txbuf; - int count; - - /* test_and_set_bit may be better, but anyway it's in lock protected mode */ - if (up->dma_tx_on) - return; - - /* Update the circ buf info */ - xmit->tail += dbuf->ofs; - xmit->tail &= UART_XMIT_SIZE - 1; - - up->port.icount.tx += dbuf->ofs; - dbuf->ofs = 0; - - /* Disable the channel */ - chan_writel(up->txc, HSU_CH_CR, 0x0); - - if (!uart_circ_empty(xmit) && !uart_tx_stopped(&up->port)) { - dma_sync_single_for_device(up->port.dev, - dbuf->dma_addr, - dbuf->dma_size, - DMA_TO_DEVICE); - - count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); - dbuf->ofs = count; - - /* Reprogram the channel */ - chan_writel(up->txc, HSU_CH_D0SAR, dbuf->dma_addr + xmit->tail); - chan_writel(up->txc, HSU_CH_D0TSR, count); - - /* Reenable the channel */ - chan_writel(up->txc, HSU_CH_DCR, 0x1 - | (0x1 << 8) - | (0x1 << 16) - | (0x1 << 24)); - up->dma_tx_on = 1; - chan_writel(up->txc, HSU_CH_CR, 0x1); - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); -} - -/* The buffer is already cache coherent */ -void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf) -{ - dbuf->ofs = 0; - - chan_writel(rxc, HSU_CH_BSR, 32); - chan_writel(rxc, HSU_CH_MOTSR, 4); - - chan_writel(rxc, HSU_CH_D0SAR, dbuf->dma_addr); - chan_writel(rxc, HSU_CH_D0TSR, dbuf->dma_size); - chan_writel(rxc, HSU_CH_DCR, 0x1 | (0x1 << 8) - | (0x1 << 16) - | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ - ); - chan_writel(rxc, HSU_CH_CR, 0x3); - - mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); -} - -/* Protected by spin_lock_irqsave(port->lock) */ -static void serial_hsu_start_tx(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - - if (up->use_dma) { - hsu_dma_tx(up); - } else if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -static void serial_hsu_stop_tx(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - struct hsu_dma_chan *txc = up->txc; - - if (up->use_dma) - chan_writel(txc, HSU_CH_CR, 0x0); - else if (up->ier & UART_IER_THRI) { - up->ier &= ~UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -/* This is always called in spinlock protected mode, so - * modify timeout timer is safe here */ -void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) -{ - struct hsu_dma_buffer *dbuf = &up->rxbuf; - struct hsu_dma_chan *chan = up->rxc; - struct uart_port *port = &up->port; - struct tty_struct *tty = port->state->port.tty; - int count; - - if (!tty) - return; - - /* - * First need to know how many is already transferred, - * then check if its a timeout DMA irq, and return - * the trail bytes out, push them up and reenable the - * channel - */ - - /* Timeout IRQ, need wait some time, see Errata 2 */ - if (int_sts & 0xf00) - udelay(2); - - /* Stop the channel */ - chan_writel(chan, HSU_CH_CR, 0x0); - - count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; - if (!count) { - /* Restart the channel before we leave */ - chan_writel(chan, HSU_CH_CR, 0x3); - return; - } - del_timer(&chan->rx_timer); - - dma_sync_single_for_cpu(port->dev, dbuf->dma_addr, - dbuf->dma_size, DMA_FROM_DEVICE); - - /* - * Head will only wrap around when we recycle - * the DMA buffer, and when that happens, we - * explicitly set tail to 0. So head will - * always be greater than tail. - */ - tty_insert_flip_string(tty, dbuf->buf, count); - port->icount.rx += count; - - dma_sync_single_for_device(up->port.dev, dbuf->dma_addr, - dbuf->dma_size, DMA_FROM_DEVICE); - - /* Reprogram the channel */ - chan_writel(chan, HSU_CH_D0SAR, dbuf->dma_addr); - chan_writel(chan, HSU_CH_D0TSR, dbuf->dma_size); - chan_writel(chan, HSU_CH_DCR, 0x1 - | (0x1 << 8) - | (0x1 << 16) - | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ - ); - tty_flip_buffer_push(tty); - - chan_writel(chan, HSU_CH_CR, 0x3); - chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ; - add_timer(&chan->rx_timer); - -} - -static void serial_hsu_stop_rx(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - struct hsu_dma_chan *chan = up->rxc; - - if (up->use_dma) - chan_writel(chan, HSU_CH_CR, 0x2); - else { - up->ier &= ~UART_IER_RLSI; - up->port.read_status_mask &= ~UART_LSR_DR; - serial_out(up, UART_IER, up->ier); - } -} - -static inline void receive_chars(struct uart_hsu_port *up, int *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned int ch, flag; - unsigned int max_count = 256; - - if (!tty) - return; - - do { - ch = serial_in(up, UART_RX); - flag = TTY_NORMAL; - up->port.icount.rx++; - - if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE))) { - - dev_warn(up->dev, "We really rush into ERR/BI case" - "status = 0x%02x", *status); - /* For statistics only */ - if (*status & UART_LSR_BI) { - *status &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (*status & UART_LSR_PE) - up->port.icount.parity++; - else if (*status & UART_LSR_FE) - up->port.icount.frame++; - if (*status & UART_LSR_OE) - up->port.icount.overrun++; - - /* Mask off conditions which should be ignored. */ - *status &= up->port.read_status_mask; - -#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE - if (up->port.cons && - up->port.cons->index == up->port.line) { - /* Recover the break flag from console xmit */ - *status |= up->lsr_break_flag; - up->lsr_break_flag = 0; - } -#endif - if (*status & UART_LSR_BI) { - flag = TTY_BREAK; - } else if (*status & UART_LSR_PE) - flag = TTY_PARITY; - else if (*status & UART_LSR_FE) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - - uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); - ignore_char: - *status = serial_in(up, UART_LSR); - } while ((*status & UART_LSR_DR) && max_count--); - tty_flip_buffer_push(tty); -} - -static void transmit_chars(struct uart_hsu_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { - serial_out(up, UART_TX, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - serial_hsu_stop_tx(&up->port); - return; - } - -#ifndef MFD_HSU_A0_STEPPING - count = up->port.fifosize / 2; -#else - /* - * A0 only supports fully empty IRQ, and the first char written - * into it won't clear the EMPT bit, so we may need be cautious - * by useing a shorter buffer - */ - count = up->port.fifosize - 4; -#endif - do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - if (uart_circ_empty(xmit)) - serial_hsu_stop_tx(&up->port); -} - -static inline void check_modem_status(struct uart_hsu_port *up) -{ - int status; - - status = serial_in(up, UART_MSR); - - if ((status & UART_MSR_ANY_DELTA) == 0) - return; - - if (status & UART_MSR_TERI) - up->port.icount.rng++; - if (status & UART_MSR_DDSR) - up->port.icount.dsr++; - /* We may only get DDCD when HW init and reset */ - if (status & UART_MSR_DDCD) - uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); - /* Will start/stop_tx accordingly */ - if (status & UART_MSR_DCTS) - uart_handle_cts_change(&up->port, status & UART_MSR_CTS); - - wake_up_interruptible(&up->port.state->port.delta_msr_wait); -} - -/* - * This handles the interrupt from one port. - */ -static irqreturn_t port_irq(int irq, void *dev_id) -{ - struct uart_hsu_port *up = dev_id; - unsigned int iir, lsr; - unsigned long flags; - - if (unlikely(!up->running)) - return IRQ_NONE; - - spin_lock_irqsave(&up->port.lock, flags); - if (up->use_dma) { - lsr = serial_in(up, UART_LSR); - if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE))) - dev_warn(up->dev, - "Got lsr irq while using DMA, lsr = 0x%2x\n", - lsr); - check_modem_status(up); - spin_unlock_irqrestore(&up->port.lock, flags); - return IRQ_HANDLED; - } - - iir = serial_in(up, UART_IIR); - if (iir & UART_IIR_NO_INT) { - spin_unlock_irqrestore(&up->port.lock, flags); - return IRQ_NONE; - } - - lsr = serial_in(up, UART_LSR); - if (lsr & UART_LSR_DR) - receive_chars(up, &lsr); - check_modem_status(up); - - /* lsr will be renewed during the receive_chars */ - if (lsr & UART_LSR_THRE) - transmit_chars(up); - - spin_unlock_irqrestore(&up->port.lock, flags); - return IRQ_HANDLED; -} - -static inline void dma_chan_irq(struct hsu_dma_chan *chan) -{ - struct uart_hsu_port *up = chan->uport; - unsigned long flags; - u32 int_sts; - - spin_lock_irqsave(&up->port.lock, flags); - - if (!up->use_dma || !up->running) - goto exit; - - /* - * No matter what situation, need read clear the IRQ status - * There is a bug, see Errata 5, HSD 2900918 - */ - int_sts = chan_readl(chan, HSU_CH_SR); - - /* Rx channel */ - if (chan->dirt == DMA_FROM_DEVICE) - hsu_dma_rx(up, int_sts); - - /* Tx channel */ - if (chan->dirt == DMA_TO_DEVICE) { - chan_writel(chan, HSU_CH_CR, 0x0); - up->dma_tx_on = 0; - hsu_dma_tx(up); - } - -exit: - spin_unlock_irqrestore(&up->port.lock, flags); - return; -} - -static irqreturn_t dma_irq(int irq, void *dev_id) -{ - struct hsu_port *hsu = dev_id; - u32 int_sts, i; - - int_sts = mfd_readl(hsu, HSU_GBL_DMAISR); - - /* Currently we only have 6 channels may be used */ - for (i = 0; i < 6; i++) { - if (int_sts & 0x1) - dma_chan_irq(&hsu->chans[i]); - int_sts >>= 1; - } - - return IRQ_HANDLED; -} - -static unsigned int serial_hsu_tx_empty(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&up->port.lock, flags); - ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret; -} - -static unsigned int serial_hsu_get_mctrl(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned char status; - unsigned int ret; - - status = serial_in(up, UART_MSR); - - ret = 0; - if (status & UART_MSR_DCD) - ret |= TIOCM_CAR; - if (status & UART_MSR_RI) - ret |= TIOCM_RNG; - if (status & UART_MSR_DSR) - ret |= TIOCM_DSR; - if (status & UART_MSR_CTS) - ret |= TIOCM_CTS; - return ret; -} - -static void serial_hsu_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned char mcr = 0; - - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - mcr |= up->mcr; - - serial_out(up, UART_MCR, mcr); -} - -static void serial_hsu_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - if (break_state == -1) - up->lcr |= UART_LCR_SBC; - else - up->lcr &= ~UART_LCR_SBC; - serial_out(up, UART_LCR, up->lcr); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -/* - * What special to do: - * 1. chose the 64B fifo mode - * 2. make sure not to select half empty mode for A0 stepping - * 3. start dma or pio depends on configuration - * 4. we only allocate dma memory when needed - */ -static int serial_hsu_startup(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned long flags; - - /* - * Clear the FIFO buffers and disable them. - * (they will be reenabled in set_termios()) - */ - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - serial_out(up, UART_FCR, 0); - - /* Clear the interrupt registers. */ - (void) serial_in(up, UART_LSR); - (void) serial_in(up, UART_RX); - (void) serial_in(up, UART_IIR); - (void) serial_in(up, UART_MSR); - - /* Now, initialize the UART, default is 8n1 */ - serial_out(up, UART_LCR, UART_LCR_WLEN8); - - spin_lock_irqsave(&up->port.lock, flags); - - up->port.mctrl |= TIOCM_OUT2; - serial_hsu_set_mctrl(&up->port, up->port.mctrl); - - /* - * Finally, enable interrupts. Note: Modem status interrupts - * are set via set_termios(), which will be occurring imminently - * anyway, so we don't enable them here. - */ - if (!up->use_dma) - up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE; - else - up->ier = 0; - serial_out(up, UART_IER, up->ier); - - spin_unlock_irqrestore(&up->port.lock, flags); - - /* DMA init */ - if (up->use_dma) { - struct hsu_dma_buffer *dbuf; - struct circ_buf *xmit = &port->state->xmit; - - up->dma_tx_on = 0; - - /* First allocate the RX buffer */ - dbuf = &up->rxbuf; - dbuf->buf = kzalloc(HSU_DMA_BUF_SIZE, GFP_KERNEL); - if (!dbuf->buf) { - up->use_dma = 0; - goto exit; - } - dbuf->dma_addr = dma_map_single(port->dev, - dbuf->buf, - HSU_DMA_BUF_SIZE, - DMA_FROM_DEVICE); - dbuf->dma_size = HSU_DMA_BUF_SIZE; - - /* Start the RX channel right now */ - hsu_dma_start_rx_chan(up->rxc, dbuf); - - /* Next init the TX DMA */ - dbuf = &up->txbuf; - dbuf->buf = xmit->buf; - dbuf->dma_addr = dma_map_single(port->dev, - dbuf->buf, - UART_XMIT_SIZE, - DMA_TO_DEVICE); - dbuf->dma_size = UART_XMIT_SIZE; - - /* This should not be changed all around */ - chan_writel(up->txc, HSU_CH_BSR, 32); - chan_writel(up->txc, HSU_CH_MOTSR, 4); - dbuf->ofs = 0; - } - -exit: - /* And clear the interrupt registers again for luck. */ - (void) serial_in(up, UART_LSR); - (void) serial_in(up, UART_RX); - (void) serial_in(up, UART_IIR); - (void) serial_in(up, UART_MSR); - - up->running = 1; - return 0; -} - -static void serial_hsu_shutdown(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - unsigned long flags; - - del_timer_sync(&up->rxc->rx_timer); - - /* Disable interrupts from this port */ - up->ier = 0; - serial_out(up, UART_IER, 0); - up->running = 0; - - spin_lock_irqsave(&up->port.lock, flags); - up->port.mctrl &= ~TIOCM_OUT2; - serial_hsu_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* Disable break condition and FIFOs */ - serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT); - serial_out(up, UART_FCR, 0); -} - -static void -serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - struct tty_struct *tty = port->state->port.tty; - unsigned char cval, fcr = 0; - unsigned long flags; - unsigned int baud, quot; - u32 ps, mul; - - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } - - /* CMSPAR isn't supported by this driver */ - if (tty) - tty->termios->c_cflag &= ~CMSPAR; - - if (termios->c_cflag & CSTOPB) - cval |= UART_LCR_STOP; - if (termios->c_cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(termios->c_cflag & PARODD)) - cval |= UART_LCR_EPAR; - - /* - * The base clk is 50Mhz, and the baud rate come from: - * baud = 50M * MUL / (DIV * PS * DLAB) - * - * For those basic low baud rate we can get the direct - * scalar from 2746800, like 115200 = 2746800/24. For those - * higher baud rate, we handle them case by case, mainly by - * adjusting the MUL/PS registers, and DIV register is kept - * as default value 0x3d09 to make things simple - */ - baud = uart_get_baud_rate(port, termios, old, 0, 4000000); - - quot = 1; - ps = 0x10; - mul = 0x3600; - switch (baud) { - case 3500000: - mul = 0x3345; - ps = 0xC; - break; - case 1843200: - mul = 0x2400; - break; - case 3000000: - case 2500000: - case 2000000: - case 1500000: - case 1000000: - case 500000: - /* mul/ps/quot = 0x9C4/0x10/0x1 will make a 500000 bps */ - mul = baud / 500000 * 0x9C4; - break; - default: - /* Use uart_get_divisor to get quot for other baud rates */ - quot = 0; - } - - if (!quot) - quot = uart_get_divisor(port, baud); - - if ((up->port.uartclk / quot) < (2400 * 16)) - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_1B; - else if ((up->port.uartclk / quot) < (230400 * 16)) - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_16B; - else - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B; - - fcr |= UART_FCR_HSU_64B_FIFO; -#ifdef MFD_HSU_A0_STEPPING - /* A0 doesn't support half empty IRQ */ - fcr |= UART_FCR_FULL_EMPT_TXI; -#endif - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - /* Update the per-port timeout */ - uart_update_timeout(port, termios->c_cflag, baud); - - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (termios->c_iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (termios->c_iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; - - /* Characters to ignore */ - up->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; - } - - /* Ignore all characters if CREAD is not set */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; - - /* - * CTS flow control flag and modem status interrupts, disable - * MSI by default - */ - up->ier &= ~UART_IER_MSI; - if (UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->ier |= UART_IER_MSI; - - serial_out(up, UART_IER, up->ier); - - if (termios->c_cflag & CRTSCTS) - up->mcr |= UART_MCR_AFE | UART_MCR_RTS; - else - up->mcr &= ~UART_MCR_AFE; - - serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ - serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ - serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ - serial_out(up, UART_LCR, cval); /* reset DLAB */ - serial_out(up, UART_MUL, mul); /* set MUL */ - serial_out(up, UART_PS, ps); /* set PS */ - up->lcr = cval; /* Save LCR */ - serial_hsu_set_mctrl(&up->port, up->port.mctrl); - serial_out(up, UART_FCR, fcr); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void -serial_hsu_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ -} - -static void serial_hsu_release_port(struct uart_port *port) -{ -} - -static int serial_hsu_request_port(struct uart_port *port) -{ - return 0; -} - -static void serial_hsu_config_port(struct uart_port *port, int flags) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - up->port.type = PORT_MFD; -} - -static int -serial_hsu_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - /* We don't want the core code to modify any port params */ - return -EINVAL; -} - -static const char * -serial_hsu_type(struct uart_port *port) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - return up->name; -} - -/* Mainly for uart console use */ -static struct uart_hsu_port *serial_hsu_ports[3]; -static struct uart_driver serial_hsu_reg; - -#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -/* Wait for transmitter & holding register to empty */ -static inline void wait_for_xmitr(struct uart_hsu_port *up) -{ - unsigned int status, tmout = 1000; - - /* Wait up to 1ms for the character to be sent. */ - do { - status = serial_in(up, UART_LSR); - - if (status & UART_LSR_BI) - up->lsr_break_flag = UART_LSR_BI; - - if (--tmout == 0) - break; - udelay(1); - } while (!(status & BOTH_EMPTY)); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout && - ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) - udelay(1); - } -} - -static void serial_hsu_console_putchar(struct uart_port *port, int ch) -{ - struct uart_hsu_port *up = - container_of(port, struct uart_hsu_port, port); - - wait_for_xmitr(up); - serial_out(up, UART_TX, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void -serial_hsu_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_hsu_port *up = serial_hsu_ports[co->index]; - unsigned long flags; - unsigned int ier; - int locked = 1; - - local_irq_save(flags); - if (up->port.sysrq) - locked = 0; - else if (oops_in_progress) { - locked = spin_trylock(&up->port.lock); - } else - spin_lock(&up->port.lock); - - /* First save the IER then disable the interrupts */ - ier = serial_in(up, UART_IER); - serial_out(up, UART_IER, 0); - - uart_console_write(&up->port, s, count, serial_hsu_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - serial_out(up, UART_IER, ier); - - if (locked) - spin_unlock(&up->port.lock); - local_irq_restore(flags); -} - -static struct console serial_hsu_console; - -static int __init -serial_hsu_console_setup(struct console *co, char *options) -{ - struct uart_hsu_port *up; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - int ret; - - if (co->index == -1 || co->index >= serial_hsu_reg.nr) - co->index = 0; - up = serial_hsu_ports[co->index]; - if (!up) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - ret = uart_set_options(&up->port, co, baud, parity, bits, flow); - - return ret; -} - -static struct console serial_hsu_console = { - .name = "ttyMFD", - .write = serial_hsu_console_write, - .device = uart_console_device, - .setup = serial_hsu_console_setup, - .flags = CON_PRINTBUFFER, - .index = 2, - .data = &serial_hsu_reg, -}; -#endif - -struct uart_ops serial_hsu_pops = { - .tx_empty = serial_hsu_tx_empty, - .set_mctrl = serial_hsu_set_mctrl, - .get_mctrl = serial_hsu_get_mctrl, - .stop_tx = serial_hsu_stop_tx, - .start_tx = serial_hsu_start_tx, - .stop_rx = serial_hsu_stop_rx, - .enable_ms = serial_hsu_enable_ms, - .break_ctl = serial_hsu_break_ctl, - .startup = serial_hsu_startup, - .shutdown = serial_hsu_shutdown, - .set_termios = serial_hsu_set_termios, - .pm = serial_hsu_pm, - .type = serial_hsu_type, - .release_port = serial_hsu_release_port, - .request_port = serial_hsu_request_port, - .config_port = serial_hsu_config_port, - .verify_port = serial_hsu_verify_port, -}; - -static struct uart_driver serial_hsu_reg = { - .owner = THIS_MODULE, - .driver_name = "MFD serial", - .dev_name = "ttyMFD", - .major = TTY_MAJOR, - .minor = 128, - .nr = 3, -}; - -#ifdef CONFIG_PM -static int serial_hsu_suspend(struct pci_dev *pdev, pm_message_t state) -{ - void *priv = pci_get_drvdata(pdev); - struct uart_hsu_port *up; - - /* Make sure this is not the internal dma controller */ - if (priv && (pdev->device != 0x081E)) { - up = priv; - uart_suspend_port(&serial_hsu_reg, &up->port); - } - - pci_save_state(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - return 0; -} - -static int serial_hsu_resume(struct pci_dev *pdev) -{ - void *priv = pci_get_drvdata(pdev); - struct uart_hsu_port *up; - int ret; - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - - ret = pci_enable_device(pdev); - if (ret) - dev_warn(&pdev->dev, - "HSU: can't re-enable device, try to continue\n"); - - if (priv && (pdev->device != 0x081E)) { - up = priv; - uart_resume_port(&serial_hsu_reg, &up->port); - } - return 0; -} -#else -#define serial_hsu_suspend NULL -#define serial_hsu_resume NULL -#endif - -/* temp global pointer before we settle down on using one or four PCI dev */ -static struct hsu_port *phsu; - -static int serial_hsu_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct uart_hsu_port *uport; - int index, ret; - - printk(KERN_INFO "HSU: found PCI Serial controller(ID: %04x:%04x)\n", - pdev->vendor, pdev->device); - - switch (pdev->device) { - case 0x081B: - index = 0; - break; - case 0x081C: - index = 1; - break; - case 0x081D: - index = 2; - break; - case 0x081E: - /* internal DMA controller */ - index = 3; - break; - default: - dev_err(&pdev->dev, "HSU: out of index!"); - return -ENODEV; - } - - ret = pci_enable_device(pdev); - if (ret) - return ret; - - if (index == 3) { - /* DMA controller */ - ret = request_irq(pdev->irq, dma_irq, 0, "hsu_dma", phsu); - if (ret) { - dev_err(&pdev->dev, "can not get IRQ\n"); - goto err_disable; - } - pci_set_drvdata(pdev, phsu); - } else { - /* UART port 0~2 */ - uport = &phsu->port[index]; - uport->port.irq = pdev->irq; - uport->port.dev = &pdev->dev; - uport->dev = &pdev->dev; - - ret = request_irq(pdev->irq, port_irq, 0, uport->name, uport); - if (ret) { - dev_err(&pdev->dev, "can not get IRQ\n"); - goto err_disable; - } - uart_add_one_port(&serial_hsu_reg, &uport->port); - -#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE - if (index == 2) { - register_console(&serial_hsu_console); - uport->port.cons = &serial_hsu_console; - } -#endif - pci_set_drvdata(pdev, uport); - } - - return 0; - -err_disable: - pci_disable_device(pdev); - return ret; -} - -static void hsu_dma_rx_timeout(unsigned long data) -{ - struct hsu_dma_chan *chan = (void *)data; - struct uart_hsu_port *up = chan->uport; - struct hsu_dma_buffer *dbuf = &up->rxbuf; - int count = 0; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; - - if (!count) { - mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); - goto exit; - } - - hsu_dma_rx(up, 0); -exit: - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void hsu_global_init(void) -{ - struct hsu_port *hsu; - struct uart_hsu_port *uport; - struct hsu_dma_chan *dchan; - int i, ret; - - hsu = kzalloc(sizeof(struct hsu_port), GFP_KERNEL); - if (!hsu) - return; - - /* Get basic io resource and map it */ - hsu->paddr = 0xffa28000; - hsu->iolen = 0x1000; - - if (!(request_mem_region(hsu->paddr, hsu->iolen, "HSU global"))) - pr_warning("HSU: error in request mem region\n"); - - hsu->reg = ioremap_nocache((unsigned long)hsu->paddr, hsu->iolen); - if (!hsu->reg) { - pr_err("HSU: error in ioremap\n"); - ret = -ENOMEM; - goto err_free_region; - } - - /* Initialise the 3 UART ports */ - uport = hsu->port; - for (i = 0; i < 3; i++) { - uport->port.type = PORT_MFD; - uport->port.iotype = UPIO_MEM; - uport->port.mapbase = (resource_size_t)hsu->paddr - + HSU_PORT_REG_OFFSET - + i * HSU_PORT_REG_LENGTH; - uport->port.membase = hsu->reg + HSU_PORT_REG_OFFSET - + i * HSU_PORT_REG_LENGTH; - - sprintf(uport->name, "hsu_port%d", i); - uport->port.fifosize = 64; - uport->port.ops = &serial_hsu_pops; - uport->port.line = i; - uport->port.flags = UPF_IOREMAP; - /* set the scalable maxim support rate to 2746800 bps */ - uport->port.uartclk = 115200 * 24 * 16; - - uport->running = 0; - uport->txc = &hsu->chans[i * 2]; - uport->rxc = &hsu->chans[i * 2 + 1]; - - serial_hsu_ports[i] = uport; - uport->index = i; - uport++; - } - - /* Initialise 6 dma channels */ - dchan = hsu->chans; - for (i = 0; i < 6; i++) { - dchan->id = i; - dchan->dirt = (i & 0x1) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; - dchan->uport = &hsu->port[i/2]; - dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET + - i * HSU_DMA_CHANS_REG_LENGTH; - - /* Work around for RX */ - if (dchan->dirt == DMA_FROM_DEVICE) { - init_timer(&dchan->rx_timer); - dchan->rx_timer.function = hsu_dma_rx_timeout; - dchan->rx_timer.data = (unsigned long)dchan; - } - dchan++; - } - - phsu = hsu; - hsu_debugfs_init(hsu); - return; - -err_free_region: - release_mem_region(hsu->paddr, hsu->iolen); - kfree(hsu); - return; -} - -static void serial_hsu_remove(struct pci_dev *pdev) -{ - void *priv = pci_get_drvdata(pdev); - struct uart_hsu_port *up; - - if (!priv) - return; - - /* For port 0/1/2, priv is the address of uart_hsu_port */ - if (pdev->device != 0x081E) { - up = priv; - uart_remove_one_port(&serial_hsu_reg, &up->port); - } - - pci_set_drvdata(pdev, NULL); - free_irq(pdev->irq, priv); - pci_disable_device(pdev); -} - -/* First 3 are UART ports, and the 4th is the DMA */ -static const struct pci_device_id pci_ids[] __devinitdata = { - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081B) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081C) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081D) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081E) }, - {}, -}; - -static struct pci_driver hsu_pci_driver = { - .name = "HSU serial", - .id_table = pci_ids, - .probe = serial_hsu_probe, - .remove = __devexit_p(serial_hsu_remove), - .suspend = serial_hsu_suspend, - .resume = serial_hsu_resume, -}; - -static int __init hsu_pci_init(void) -{ - int ret; - - hsu_global_init(); - - ret = uart_register_driver(&serial_hsu_reg); - if (ret) - return ret; - - return pci_register_driver(&hsu_pci_driver); -} - -static void __exit hsu_pci_exit(void) -{ - pci_unregister_driver(&hsu_pci_driver); - uart_unregister_driver(&serial_hsu_reg); - - hsu_debugfs_remove(phsu); - - kfree(phsu); -} - -module_init(hsu_pci_init); -module_exit(hsu_pci_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:medfield-hsu"); diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c deleted file mode 100644 index 126ec7f568ec..000000000000 --- a/drivers/serial/mpc52xx_uart.c +++ /dev/null @@ -1,1527 +0,0 @@ -/* - * Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs. - * - * FIXME According to the usermanual the status bits in the status register - * are only updated when the peripherals access the FIFO and not when the - * CPU access them. So since we use this bits to know when we stop writing - * and reading, they may not be updated in-time and a race condition may - * exists. But I haven't be able to prove this and I don't care. But if - * any problem arises, it might worth checking. The TX/RX FIFO Stats - * registers should be used in addition. - * Update: Actually, they seem updated ... At least the bits we use. - * - * - * Maintainer : Sylvain Munaut - * - * Some of the code has been inspired/copied from the 2.4 code written - * by Dale Farnsworth . - * - * Copyright (C) 2008 Freescale Semiconductor Inc. - * John Rigby - * Added support for MPC5121 - * Copyright (C) 2006 Secret Lab Technologies Ltd. - * Grant Likely - * Copyright (C) 2004-2006 Sylvain Munaut - * Copyright (C) 2003 MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - - -/* We've been assigned a range on the "Low-density serial ports" major */ -#define SERIAL_PSC_MAJOR 204 -#define SERIAL_PSC_MINOR 148 - - -#define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */ - - -static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM]; - /* Rem: - We use the read_status_mask as a shadow of - * psc->mpc52xx_psc_imr - * - It's important that is array is all zero on start as we - * use it to know if it's initialized or not ! If it's not sure - * it's cleared, then a memset(...,0,...) should be added to - * the console_init - */ - -/* lookup table for matching device nodes to index numbers */ -static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM]; - -static void mpc52xx_uart_of_enumerate(void); - - -#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase)) - - -/* Forward declaration of the interruption handling routine */ -static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id); -static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port); - - -/* Simple macro to test if a port is console or not. This one is taken - * for serial_core.c and maybe should be moved to serial_core.h ? */ -#ifdef CONFIG_SERIAL_CORE_CONSOLE -#define uart_console(port) \ - ((port)->cons && (port)->cons->index == (port)->line) -#else -#define uart_console(port) (0) -#endif - -/* ======================================================================== */ -/* PSC fifo operations for isolating differences between 52xx and 512x */ -/* ======================================================================== */ - -struct psc_ops { - void (*fifo_init)(struct uart_port *port); - int (*raw_rx_rdy)(struct uart_port *port); - int (*raw_tx_rdy)(struct uart_port *port); - int (*rx_rdy)(struct uart_port *port); - int (*tx_rdy)(struct uart_port *port); - int (*tx_empty)(struct uart_port *port); - void (*stop_rx)(struct uart_port *port); - void (*start_tx)(struct uart_port *port); - void (*stop_tx)(struct uart_port *port); - void (*rx_clr_irq)(struct uart_port *port); - void (*tx_clr_irq)(struct uart_port *port); - void (*write_char)(struct uart_port *port, unsigned char c); - unsigned char (*read_char)(struct uart_port *port); - void (*cw_disable_ints)(struct uart_port *port); - void (*cw_restore_ints)(struct uart_port *port); - unsigned int (*set_baudrate)(struct uart_port *port, - struct ktermios *new, - struct ktermios *old); - int (*clock)(struct uart_port *port, int enable); - int (*fifoc_init)(void); - void (*fifoc_uninit)(void); - void (*get_irq)(struct uart_port *, struct device_node *); - irqreturn_t (*handle_irq)(struct uart_port *port); -}; - -/* setting the prescaler and divisor reg is common for all chips */ -static inline void mpc52xx_set_divisor(struct mpc52xx_psc __iomem *psc, - u16 prescaler, unsigned int divisor) -{ - /* select prescaler */ - out_be16(&psc->mpc52xx_psc_clock_select, prescaler); - out_8(&psc->ctur, divisor >> 8); - out_8(&psc->ctlr, divisor & 0xff); -} - -#ifdef CONFIG_PPC_MPC52xx -#define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1)) -static void mpc52xx_psc_fifo_init(struct uart_port *port) -{ - struct mpc52xx_psc __iomem *psc = PSC(port); - struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port); - - out_8(&fifo->rfcntl, 0x00); - out_be16(&fifo->rfalarm, 0x1ff); - out_8(&fifo->tfcntl, 0x07); - out_be16(&fifo->tfalarm, 0x80); - - port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY; - out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); -} - -static int mpc52xx_psc_raw_rx_rdy(struct uart_port *port) -{ - return in_be16(&PSC(port)->mpc52xx_psc_status) - & MPC52xx_PSC_SR_RXRDY; -} - -static int mpc52xx_psc_raw_tx_rdy(struct uart_port *port) -{ - return in_be16(&PSC(port)->mpc52xx_psc_status) - & MPC52xx_PSC_SR_TXRDY; -} - - -static int mpc52xx_psc_rx_rdy(struct uart_port *port) -{ - return in_be16(&PSC(port)->mpc52xx_psc_isr) - & port->read_status_mask - & MPC52xx_PSC_IMR_RXRDY; -} - -static int mpc52xx_psc_tx_rdy(struct uart_port *port) -{ - return in_be16(&PSC(port)->mpc52xx_psc_isr) - & port->read_status_mask - & MPC52xx_PSC_IMR_TXRDY; -} - -static int mpc52xx_psc_tx_empty(struct uart_port *port) -{ - return in_be16(&PSC(port)->mpc52xx_psc_status) - & MPC52xx_PSC_SR_TXEMP; -} - -static void mpc52xx_psc_start_tx(struct uart_port *port) -{ - port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY; - out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); -} - -static void mpc52xx_psc_stop_tx(struct uart_port *port) -{ - port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY; - out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); -} - -static void mpc52xx_psc_stop_rx(struct uart_port *port) -{ - port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY; - out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); -} - -static void mpc52xx_psc_rx_clr_irq(struct uart_port *port) -{ -} - -static void mpc52xx_psc_tx_clr_irq(struct uart_port *port) -{ -} - -static void mpc52xx_psc_write_char(struct uart_port *port, unsigned char c) -{ - out_8(&PSC(port)->mpc52xx_psc_buffer_8, c); -} - -static unsigned char mpc52xx_psc_read_char(struct uart_port *port) -{ - return in_8(&PSC(port)->mpc52xx_psc_buffer_8); -} - -static void mpc52xx_psc_cw_disable_ints(struct uart_port *port) -{ - out_be16(&PSC(port)->mpc52xx_psc_imr, 0); -} - -static void mpc52xx_psc_cw_restore_ints(struct uart_port *port) -{ - out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); -} - -static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port, - struct ktermios *new, - struct ktermios *old) -{ - unsigned int baud; - unsigned int divisor; - - /* The 5200 has a fixed /32 prescaler, uartclk contains the ipb freq */ - baud = uart_get_baud_rate(port, new, old, - port->uartclk / (32 * 0xffff) + 1, - port->uartclk / 32); - divisor = (port->uartclk + 16 * baud) / (32 * baud); - - /* enable the /32 prescaler and set the divisor */ - mpc52xx_set_divisor(PSC(port), 0xdd00, divisor); - return baud; -} - -static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port, - struct ktermios *new, - struct ktermios *old) -{ - unsigned int baud; - unsigned int divisor; - u16 prescaler; - - /* The 5200B has a selectable /4 or /32 prescaler, uartclk contains the - * ipb freq */ - baud = uart_get_baud_rate(port, new, old, - port->uartclk / (32 * 0xffff) + 1, - port->uartclk / 4); - divisor = (port->uartclk + 2 * baud) / (4 * baud); - - /* select the proper prescaler and set the divisor */ - if (divisor > 0xffff) { - divisor = (divisor + 4) / 8; - prescaler = 0xdd00; /* /32 */ - } else - prescaler = 0xff00; /* /4 */ - mpc52xx_set_divisor(PSC(port), prescaler, divisor); - return baud; -} - -static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np) -{ - port->irqflags = IRQF_DISABLED; - port->irq = irq_of_parse_and_map(np, 0); -} - -/* 52xx specific interrupt handler. The caller holds the port lock */ -static irqreturn_t mpc52xx_psc_handle_irq(struct uart_port *port) -{ - return mpc5xxx_uart_process_int(port); -} - -static struct psc_ops mpc52xx_psc_ops = { - .fifo_init = mpc52xx_psc_fifo_init, - .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy, - .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy, - .rx_rdy = mpc52xx_psc_rx_rdy, - .tx_rdy = mpc52xx_psc_tx_rdy, - .tx_empty = mpc52xx_psc_tx_empty, - .stop_rx = mpc52xx_psc_stop_rx, - .start_tx = mpc52xx_psc_start_tx, - .stop_tx = mpc52xx_psc_stop_tx, - .rx_clr_irq = mpc52xx_psc_rx_clr_irq, - .tx_clr_irq = mpc52xx_psc_tx_clr_irq, - .write_char = mpc52xx_psc_write_char, - .read_char = mpc52xx_psc_read_char, - .cw_disable_ints = mpc52xx_psc_cw_disable_ints, - .cw_restore_ints = mpc52xx_psc_cw_restore_ints, - .set_baudrate = mpc5200_psc_set_baudrate, - .get_irq = mpc52xx_psc_get_irq, - .handle_irq = mpc52xx_psc_handle_irq, -}; - -static struct psc_ops mpc5200b_psc_ops = { - .fifo_init = mpc52xx_psc_fifo_init, - .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy, - .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy, - .rx_rdy = mpc52xx_psc_rx_rdy, - .tx_rdy = mpc52xx_psc_tx_rdy, - .tx_empty = mpc52xx_psc_tx_empty, - .stop_rx = mpc52xx_psc_stop_rx, - .start_tx = mpc52xx_psc_start_tx, - .stop_tx = mpc52xx_psc_stop_tx, - .rx_clr_irq = mpc52xx_psc_rx_clr_irq, - .tx_clr_irq = mpc52xx_psc_tx_clr_irq, - .write_char = mpc52xx_psc_write_char, - .read_char = mpc52xx_psc_read_char, - .cw_disable_ints = mpc52xx_psc_cw_disable_ints, - .cw_restore_ints = mpc52xx_psc_cw_restore_ints, - .set_baudrate = mpc5200b_psc_set_baudrate, - .get_irq = mpc52xx_psc_get_irq, - .handle_irq = mpc52xx_psc_handle_irq, -}; - -#endif /* CONFIG_MPC52xx */ - -#ifdef CONFIG_PPC_MPC512x -#define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1)) - -/* PSC FIFO Controller for mpc512x */ -struct psc_fifoc { - u32 fifoc_cmd; - u32 fifoc_int; - u32 fifoc_dma; - u32 fifoc_axe; - u32 fifoc_debug; -}; - -static struct psc_fifoc __iomem *psc_fifoc; -static unsigned int psc_fifoc_irq; - -static void mpc512x_psc_fifo_init(struct uart_port *port) -{ - /* /32 prescaler */ - out_be16(&PSC(port)->mpc52xx_psc_clock_select, 0xdd00); - - out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE); - out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); - out_be32(&FIFO_512x(port)->txalarm, 1); - out_be32(&FIFO_512x(port)->tximr, 0); - - out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_RESET_SLICE); - out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); - out_be32(&FIFO_512x(port)->rxalarm, 1); - out_be32(&FIFO_512x(port)->rximr, 0); - - out_be32(&FIFO_512x(port)->tximr, MPC512x_PSC_FIFO_ALARM); - out_be32(&FIFO_512x(port)->rximr, MPC512x_PSC_FIFO_ALARM); -} - -static int mpc512x_psc_raw_rx_rdy(struct uart_port *port) -{ - return !(in_be32(&FIFO_512x(port)->rxsr) & MPC512x_PSC_FIFO_EMPTY); -} - -static int mpc512x_psc_raw_tx_rdy(struct uart_port *port) -{ - return !(in_be32(&FIFO_512x(port)->txsr) & MPC512x_PSC_FIFO_FULL); -} - -static int mpc512x_psc_rx_rdy(struct uart_port *port) -{ - return in_be32(&FIFO_512x(port)->rxsr) - & in_be32(&FIFO_512x(port)->rximr) - & MPC512x_PSC_FIFO_ALARM; -} - -static int mpc512x_psc_tx_rdy(struct uart_port *port) -{ - return in_be32(&FIFO_512x(port)->txsr) - & in_be32(&FIFO_512x(port)->tximr) - & MPC512x_PSC_FIFO_ALARM; -} - -static int mpc512x_psc_tx_empty(struct uart_port *port) -{ - return in_be32(&FIFO_512x(port)->txsr) - & MPC512x_PSC_FIFO_EMPTY; -} - -static void mpc512x_psc_stop_rx(struct uart_port *port) -{ - unsigned long rx_fifo_imr; - - rx_fifo_imr = in_be32(&FIFO_512x(port)->rximr); - rx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM; - out_be32(&FIFO_512x(port)->rximr, rx_fifo_imr); -} - -static void mpc512x_psc_start_tx(struct uart_port *port) -{ - unsigned long tx_fifo_imr; - - tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr); - tx_fifo_imr |= MPC512x_PSC_FIFO_ALARM; - out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr); -} - -static void mpc512x_psc_stop_tx(struct uart_port *port) -{ - unsigned long tx_fifo_imr; - - tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr); - tx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM; - out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr); -} - -static void mpc512x_psc_rx_clr_irq(struct uart_port *port) -{ - out_be32(&FIFO_512x(port)->rxisr, in_be32(&FIFO_512x(port)->rxisr)); -} - -static void mpc512x_psc_tx_clr_irq(struct uart_port *port) -{ - out_be32(&FIFO_512x(port)->txisr, in_be32(&FIFO_512x(port)->txisr)); -} - -static void mpc512x_psc_write_char(struct uart_port *port, unsigned char c) -{ - out_8(&FIFO_512x(port)->txdata_8, c); -} - -static unsigned char mpc512x_psc_read_char(struct uart_port *port) -{ - return in_8(&FIFO_512x(port)->rxdata_8); -} - -static void mpc512x_psc_cw_disable_ints(struct uart_port *port) -{ - port->read_status_mask = - in_be32(&FIFO_512x(port)->tximr) << 16 | - in_be32(&FIFO_512x(port)->rximr); - out_be32(&FIFO_512x(port)->tximr, 0); - out_be32(&FIFO_512x(port)->rximr, 0); -} - -static void mpc512x_psc_cw_restore_ints(struct uart_port *port) -{ - out_be32(&FIFO_512x(port)->tximr, - (port->read_status_mask >> 16) & 0x7f); - out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f); -} - -static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port, - struct ktermios *new, - struct ktermios *old) -{ - unsigned int baud; - unsigned int divisor; - - /* - * The "MPC5121e Microcontroller Reference Manual, Rev. 3" says on - * pg. 30-10 that the chip supports a /32 and a /10 prescaler. - * Furthermore, it states that "After reset, the prescaler by 10 - * for the UART mode is selected", but the reset register value is - * 0x0000 which means a /32 prescaler. This is wrong. - * - * In reality using /32 prescaler doesn't work, as it is not supported! - * Use /16 or /10 prescaler, see "MPC5121e Hardware Design Guide", - * Chapter 4.1 PSC in UART Mode. - * Calculate with a /16 prescaler here. - */ - - /* uartclk contains the ips freq */ - baud = uart_get_baud_rate(port, new, old, - port->uartclk / (16 * 0xffff) + 1, - port->uartclk / 16); - divisor = (port->uartclk + 8 * baud) / (16 * baud); - - /* enable the /16 prescaler and set the divisor */ - mpc52xx_set_divisor(PSC(port), 0xdd00, divisor); - return baud; -} - -/* Init PSC FIFO Controller */ -static int __init mpc512x_psc_fifoc_init(void) -{ - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, - "fsl,mpc5121-psc-fifo"); - if (!np) { - pr_err("%s: Can't find FIFOC node\n", __func__); - return -ENODEV; - } - - psc_fifoc = of_iomap(np, 0); - if (!psc_fifoc) { - pr_err("%s: Can't map FIFOC\n", __func__); - of_node_put(np); - return -ENODEV; - } - - psc_fifoc_irq = irq_of_parse_and_map(np, 0); - of_node_put(np); - if (psc_fifoc_irq == NO_IRQ) { - pr_err("%s: Can't get FIFOC irq\n", __func__); - iounmap(psc_fifoc); - return -ENODEV; - } - - return 0; -} - -static void __exit mpc512x_psc_fifoc_uninit(void) -{ - iounmap(psc_fifoc); -} - -/* 512x specific interrupt handler. The caller holds the port lock */ -static irqreturn_t mpc512x_psc_handle_irq(struct uart_port *port) -{ - unsigned long fifoc_int; - int psc_num; - - /* Read pending PSC FIFOC interrupts */ - fifoc_int = in_be32(&psc_fifoc->fifoc_int); - - /* Check if it is an interrupt for this port */ - psc_num = (port->mapbase & 0xf00) >> 8; - if (test_bit(psc_num, &fifoc_int) || - test_bit(psc_num + 16, &fifoc_int)) - return mpc5xxx_uart_process_int(port); - - return IRQ_NONE; -} - -static int mpc512x_psc_clock(struct uart_port *port, int enable) -{ - struct clk *psc_clk; - int psc_num; - char clk_name[10]; - - if (uart_console(port)) - return 0; - - psc_num = (port->mapbase & 0xf00) >> 8; - snprintf(clk_name, sizeof(clk_name), "psc%d_clk", psc_num); - psc_clk = clk_get(port->dev, clk_name); - if (IS_ERR(psc_clk)) { - dev_err(port->dev, "Failed to get PSC clock entry!\n"); - return -ENODEV; - } - - dev_dbg(port->dev, "%s %sable\n", clk_name, enable ? "en" : "dis"); - - if (enable) - clk_enable(psc_clk); - else - clk_disable(psc_clk); - - return 0; -} - -static void mpc512x_psc_get_irq(struct uart_port *port, struct device_node *np) -{ - port->irqflags = IRQF_SHARED; - port->irq = psc_fifoc_irq; -} - -static struct psc_ops mpc512x_psc_ops = { - .fifo_init = mpc512x_psc_fifo_init, - .raw_rx_rdy = mpc512x_psc_raw_rx_rdy, - .raw_tx_rdy = mpc512x_psc_raw_tx_rdy, - .rx_rdy = mpc512x_psc_rx_rdy, - .tx_rdy = mpc512x_psc_tx_rdy, - .tx_empty = mpc512x_psc_tx_empty, - .stop_rx = mpc512x_psc_stop_rx, - .start_tx = mpc512x_psc_start_tx, - .stop_tx = mpc512x_psc_stop_tx, - .rx_clr_irq = mpc512x_psc_rx_clr_irq, - .tx_clr_irq = mpc512x_psc_tx_clr_irq, - .write_char = mpc512x_psc_write_char, - .read_char = mpc512x_psc_read_char, - .cw_disable_ints = mpc512x_psc_cw_disable_ints, - .cw_restore_ints = mpc512x_psc_cw_restore_ints, - .set_baudrate = mpc512x_psc_set_baudrate, - .clock = mpc512x_psc_clock, - .fifoc_init = mpc512x_psc_fifoc_init, - .fifoc_uninit = mpc512x_psc_fifoc_uninit, - .get_irq = mpc512x_psc_get_irq, - .handle_irq = mpc512x_psc_handle_irq, -}; -#endif - -static struct psc_ops *psc_ops; - -/* ======================================================================== */ -/* UART operations */ -/* ======================================================================== */ - -static unsigned int -mpc52xx_uart_tx_empty(struct uart_port *port) -{ - return psc_ops->tx_empty(port) ? TIOCSER_TEMT : 0; -} - -static void -mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - if (mctrl & TIOCM_RTS) - out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS); - else - out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS); -} - -static unsigned int -mpc52xx_uart_get_mctrl(struct uart_port *port) -{ - unsigned int ret = TIOCM_DSR; - u8 status = in_8(&PSC(port)->mpc52xx_psc_ipcr); - - if (!(status & MPC52xx_PSC_CTS)) - ret |= TIOCM_CTS; - if (!(status & MPC52xx_PSC_DCD)) - ret |= TIOCM_CAR; - - return ret; -} - -static void -mpc52xx_uart_stop_tx(struct uart_port *port) -{ - /* port->lock taken by caller */ - psc_ops->stop_tx(port); -} - -static void -mpc52xx_uart_start_tx(struct uart_port *port) -{ - /* port->lock taken by caller */ - psc_ops->start_tx(port); -} - -static void -mpc52xx_uart_send_xchar(struct uart_port *port, char ch) -{ - unsigned long flags; - spin_lock_irqsave(&port->lock, flags); - - port->x_char = ch; - if (ch) { - /* Make sure tx interrupts are on */ - /* Truly necessary ??? They should be anyway */ - psc_ops->start_tx(port); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void -mpc52xx_uart_stop_rx(struct uart_port *port) -{ - /* port->lock taken by caller */ - psc_ops->stop_rx(port); -} - -static void -mpc52xx_uart_enable_ms(struct uart_port *port) -{ - struct mpc52xx_psc __iomem *psc = PSC(port); - - /* clear D_*-bits by reading them */ - in_8(&psc->mpc52xx_psc_ipcr); - /* enable CTS and DCD as IPC interrupts */ - out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD); - - port->read_status_mask |= MPC52xx_PSC_IMR_IPC; - out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); -} - -static void -mpc52xx_uart_break_ctl(struct uart_port *port, int ctl) -{ - unsigned long flags; - spin_lock_irqsave(&port->lock, flags); - - if (ctl == -1) - out_8(&PSC(port)->command, MPC52xx_PSC_START_BRK); - else - out_8(&PSC(port)->command, MPC52xx_PSC_STOP_BRK); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static int -mpc52xx_uart_startup(struct uart_port *port) -{ - struct mpc52xx_psc __iomem *psc = PSC(port); - int ret; - - if (psc_ops->clock) { - ret = psc_ops->clock(port, 1); - if (ret) - return ret; - } - - /* Request IRQ */ - ret = request_irq(port->irq, mpc52xx_uart_int, - port->irqflags, "mpc52xx_psc_uart", port); - if (ret) - return ret; - - /* Reset/activate the port, clear and enable interrupts */ - out_8(&psc->command, MPC52xx_PSC_RST_RX); - out_8(&psc->command, MPC52xx_PSC_RST_TX); - - out_be32(&psc->sicr, 0); /* UART mode DCD ignored */ - - psc_ops->fifo_init(port); - - out_8(&psc->command, MPC52xx_PSC_TX_ENABLE); - out_8(&psc->command, MPC52xx_PSC_RX_ENABLE); - - return 0; -} - -static void -mpc52xx_uart_shutdown(struct uart_port *port) -{ - struct mpc52xx_psc __iomem *psc = PSC(port); - - /* Shut down the port. Leave TX active if on a console port */ - out_8(&psc->command, MPC52xx_PSC_RST_RX); - if (!uart_console(port)) - out_8(&psc->command, MPC52xx_PSC_RST_TX); - - port->read_status_mask = 0; - out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); - - if (psc_ops->clock) - psc_ops->clock(port, 0); - - /* Release interrupt */ - free_irq(port->irq, port); -} - -static void -mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) -{ - struct mpc52xx_psc __iomem *psc = PSC(port); - unsigned long flags; - unsigned char mr1, mr2; - unsigned int j; - unsigned int baud; - - /* Prepare what we're gonna write */ - mr1 = 0; - - switch (new->c_cflag & CSIZE) { - case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS; - break; - case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS; - break; - case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS; - break; - case CS8: - default: mr1 |= MPC52xx_PSC_MODE_8_BITS; - } - - if (new->c_cflag & PARENB) { - mr1 |= (new->c_cflag & PARODD) ? - MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN; - } else - mr1 |= MPC52xx_PSC_MODE_PARNONE; - - - mr2 = 0; - - if (new->c_cflag & CSTOPB) - mr2 |= MPC52xx_PSC_MODE_TWO_STOP; - else - mr2 |= ((new->c_cflag & CSIZE) == CS5) ? - MPC52xx_PSC_MODE_ONE_STOP_5_BITS : - MPC52xx_PSC_MODE_ONE_STOP; - - if (new->c_cflag & CRTSCTS) { - mr1 |= MPC52xx_PSC_MODE_RXRTS; - mr2 |= MPC52xx_PSC_MODE_TXCTS; - } - - /* Get the lock */ - spin_lock_irqsave(&port->lock, flags); - - /* Do our best to flush TX & RX, so we don't lose anything */ - /* But we don't wait indefinitely ! */ - j = 5000000; /* Maximum wait */ - /* FIXME Can't receive chars since set_termios might be called at early - * boot for the console, all stuff is not yet ready to receive at that - * time and that just makes the kernel oops */ - /* while (j-- && mpc52xx_uart_int_rx_chars(port)); */ - while (!mpc52xx_uart_tx_empty(port) && --j) - udelay(1); - - if (!j) - printk(KERN_ERR "mpc52xx_uart.c: " - "Unable to flush RX & TX fifos in-time in set_termios." - "Some chars may have been lost.\n"); - - /* Reset the TX & RX */ - out_8(&psc->command, MPC52xx_PSC_RST_RX); - out_8(&psc->command, MPC52xx_PSC_RST_TX); - - /* Send new mode settings */ - out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); - out_8(&psc->mode, mr1); - out_8(&psc->mode, mr2); - baud = psc_ops->set_baudrate(port, new, old); - - /* Update the per-port timeout */ - uart_update_timeout(port, new->c_cflag, baud); - - if (UART_ENABLE_MS(port, new->c_cflag)) - mpc52xx_uart_enable_ms(port); - - /* Reenable TX & RX */ - out_8(&psc->command, MPC52xx_PSC_TX_ENABLE); - out_8(&psc->command, MPC52xx_PSC_RX_ENABLE); - - /* We're all set, release the lock */ - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char * -mpc52xx_uart_type(struct uart_port *port) -{ - /* - * We keep using PORT_MPC52xx for historic reasons although it applies - * for MPC512x, too, but print "MPC5xxx" to not irritate users - */ - return port->type == PORT_MPC52xx ? "MPC5xxx PSC" : NULL; -} - -static void -mpc52xx_uart_release_port(struct uart_port *port) -{ - /* remapped by us ? */ - if (port->flags & UPF_IOREMAP) { - iounmap(port->membase); - port->membase = NULL; - } - - release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc)); -} - -static int -mpc52xx_uart_request_port(struct uart_port *port) -{ - int err; - - if (port->flags & UPF_IOREMAP) /* Need to remap ? */ - port->membase = ioremap(port->mapbase, - sizeof(struct mpc52xx_psc)); - - if (!port->membase) - return -EINVAL; - - err = request_mem_region(port->mapbase, sizeof(struct mpc52xx_psc), - "mpc52xx_psc_uart") != NULL ? 0 : -EBUSY; - - if (err && (port->flags & UPF_IOREMAP)) { - iounmap(port->membase); - port->membase = NULL; - } - - return err; -} - -static void -mpc52xx_uart_config_port(struct uart_port *port, int flags) -{ - if ((flags & UART_CONFIG_TYPE) - && (mpc52xx_uart_request_port(port) == 0)) - port->type = PORT_MPC52xx; -} - -static int -mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx) - return -EINVAL; - - if ((ser->irq != port->irq) || - (ser->io_type != UPIO_MEM) || - (ser->baud_base != port->uartclk) || - (ser->iomem_base != (void *)port->mapbase) || - (ser->hub6 != 0)) - return -EINVAL; - - return 0; -} - - -static struct uart_ops mpc52xx_uart_ops = { - .tx_empty = mpc52xx_uart_tx_empty, - .set_mctrl = mpc52xx_uart_set_mctrl, - .get_mctrl = mpc52xx_uart_get_mctrl, - .stop_tx = mpc52xx_uart_stop_tx, - .start_tx = mpc52xx_uart_start_tx, - .send_xchar = mpc52xx_uart_send_xchar, - .stop_rx = mpc52xx_uart_stop_rx, - .enable_ms = mpc52xx_uart_enable_ms, - .break_ctl = mpc52xx_uart_break_ctl, - .startup = mpc52xx_uart_startup, - .shutdown = mpc52xx_uart_shutdown, - .set_termios = mpc52xx_uart_set_termios, -/* .pm = mpc52xx_uart_pm, Not supported yet */ -/* .set_wake = mpc52xx_uart_set_wake, Not supported yet */ - .type = mpc52xx_uart_type, - .release_port = mpc52xx_uart_release_port, - .request_port = mpc52xx_uart_request_port, - .config_port = mpc52xx_uart_config_port, - .verify_port = mpc52xx_uart_verify_port -}; - - -/* ======================================================================== */ -/* Interrupt handling */ -/* ======================================================================== */ - -static inline int -mpc52xx_uart_int_rx_chars(struct uart_port *port) -{ - struct tty_struct *tty = port->state->port.tty; - unsigned char ch, flag; - unsigned short status; - - /* While we can read, do so ! */ - while (psc_ops->raw_rx_rdy(port)) { - /* Get the char */ - ch = psc_ops->read_char(port); - - /* Handle sysreq char */ -#ifdef SUPPORT_SYSRQ - if (uart_handle_sysrq_char(port, ch)) { - port->sysrq = 0; - continue; - } -#endif - - /* Store it */ - - flag = TTY_NORMAL; - port->icount.rx++; - - status = in_be16(&PSC(port)->mpc52xx_psc_status); - - if (status & (MPC52xx_PSC_SR_PE | - MPC52xx_PSC_SR_FE | - MPC52xx_PSC_SR_RB)) { - - if (status & MPC52xx_PSC_SR_RB) { - flag = TTY_BREAK; - uart_handle_break(port); - port->icount.brk++; - } else if (status & MPC52xx_PSC_SR_PE) { - flag = TTY_PARITY; - port->icount.parity++; - } - else if (status & MPC52xx_PSC_SR_FE) { - flag = TTY_FRAME; - port->icount.frame++; - } - - /* Clear error condition */ - out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT); - - } - tty_insert_flip_char(tty, ch, flag); - if (status & MPC52xx_PSC_SR_OE) { - /* - * Overrun is special, since it's - * reported immediately, and doesn't - * affect the current character - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - port->icount.overrun++; - } - } - - spin_unlock(&port->lock); - tty_flip_buffer_push(tty); - spin_lock(&port->lock); - - return psc_ops->raw_rx_rdy(port); -} - -static inline int -mpc52xx_uart_int_tx_chars(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - - /* Process out of band chars */ - if (port->x_char) { - psc_ops->write_char(port, port->x_char); - port->icount.tx++; - port->x_char = 0; - return 1; - } - - /* Nothing to do ? */ - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - mpc52xx_uart_stop_tx(port); - return 0; - } - - /* Send chars */ - while (psc_ops->raw_tx_rdy(port)) { - psc_ops->write_char(port, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - /* Wake up */ - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - /* Maybe we're done after all */ - if (uart_circ_empty(xmit)) { - mpc52xx_uart_stop_tx(port); - return 0; - } - - return 1; -} - -static irqreturn_t -mpc5xxx_uart_process_int(struct uart_port *port) -{ - unsigned long pass = ISR_PASS_LIMIT; - unsigned int keepgoing; - u8 status; - - /* While we have stuff to do, we continue */ - do { - /* If we don't find anything to do, we stop */ - keepgoing = 0; - - psc_ops->rx_clr_irq(port); - if (psc_ops->rx_rdy(port)) - keepgoing |= mpc52xx_uart_int_rx_chars(port); - - psc_ops->tx_clr_irq(port); - if (psc_ops->tx_rdy(port)) - keepgoing |= mpc52xx_uart_int_tx_chars(port); - - status = in_8(&PSC(port)->mpc52xx_psc_ipcr); - if (status & MPC52xx_PSC_D_DCD) - uart_handle_dcd_change(port, !(status & MPC52xx_PSC_DCD)); - - if (status & MPC52xx_PSC_D_CTS) - uart_handle_cts_change(port, !(status & MPC52xx_PSC_CTS)); - - /* Limit number of iteration */ - if (!(--pass)) - keepgoing = 0; - - } while (keepgoing); - - return IRQ_HANDLED; -} - -static irqreturn_t -mpc52xx_uart_int(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - irqreturn_t ret; - - spin_lock(&port->lock); - - ret = psc_ops->handle_irq(port); - - spin_unlock(&port->lock); - - return ret; -} - -/* ======================================================================== */ -/* Console ( if applicable ) */ -/* ======================================================================== */ - -#ifdef CONFIG_SERIAL_MPC52xx_CONSOLE - -static void __init -mpc52xx_console_get_options(struct uart_port *port, - int *baud, int *parity, int *bits, int *flow) -{ - struct mpc52xx_psc __iomem *psc = PSC(port); - unsigned char mr1; - - pr_debug("mpc52xx_console_get_options(port=%p)\n", port); - - /* Read the mode registers */ - out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); - mr1 = in_8(&psc->mode); - - /* CT{U,L}R are write-only ! */ - *baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; - - /* Parse them */ - switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) { - case MPC52xx_PSC_MODE_5_BITS: - *bits = 5; - break; - case MPC52xx_PSC_MODE_6_BITS: - *bits = 6; - break; - case MPC52xx_PSC_MODE_7_BITS: - *bits = 7; - break; - case MPC52xx_PSC_MODE_8_BITS: - default: - *bits = 8; - } - - if (mr1 & MPC52xx_PSC_MODE_PARNONE) - *parity = 'n'; - else - *parity = mr1 & MPC52xx_PSC_MODE_PARODD ? 'o' : 'e'; -} - -static void -mpc52xx_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_port *port = &mpc52xx_uart_ports[co->index]; - unsigned int i, j; - - /* Disable interrupts */ - psc_ops->cw_disable_ints(port); - - /* Wait the TX buffer to be empty */ - j = 5000000; /* Maximum wait */ - while (!mpc52xx_uart_tx_empty(port) && --j) - udelay(1); - - /* Write all the chars */ - for (i = 0; i < count; i++, s++) { - /* Line return handling */ - if (*s == '\n') - psc_ops->write_char(port, '\r'); - - /* Send the char */ - psc_ops->write_char(port, *s); - - /* Wait the TX buffer to be empty */ - j = 20000; /* Maximum wait */ - while (!mpc52xx_uart_tx_empty(port) && --j) - udelay(1); - } - - /* Restore interrupt state */ - psc_ops->cw_restore_ints(port); -} - - -static int __init -mpc52xx_console_setup(struct console *co, char *options) -{ - struct uart_port *port = &mpc52xx_uart_ports[co->index]; - struct device_node *np = mpc52xx_uart_nodes[co->index]; - unsigned int uartclk; - struct resource res; - int ret; - - int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n", - co, co->index, options); - - if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) { - pr_debug("PSC%x out of range\n", co->index); - return -EINVAL; - } - - if (!np) { - pr_debug("PSC%x not found in device tree\n", co->index); - return -EINVAL; - } - - pr_debug("Console on ttyPSC%x is %s\n", - co->index, mpc52xx_uart_nodes[co->index]->full_name); - - /* Fetch register locations */ - ret = of_address_to_resource(np, 0, &res); - if (ret) { - pr_debug("Could not get resources for PSC%x\n", co->index); - return ret; - } - - uartclk = mpc5xxx_get_bus_frequency(np); - if (uartclk == 0) { - pr_debug("Could not find uart clock frequency!\n"); - return -EINVAL; - } - - /* Basic port init. Needed since we use some uart_??? func before - * real init for early access */ - spin_lock_init(&port->lock); - port->uartclk = uartclk; - port->ops = &mpc52xx_uart_ops; - port->mapbase = res.start; - port->membase = ioremap(res.start, sizeof(struct mpc52xx_psc)); - port->irq = irq_of_parse_and_map(np, 0); - - if (port->membase == NULL) - return -EINVAL; - - pr_debug("mpc52xx-psc uart at %p, mapped to %p, irq=%x, freq=%i\n", - (void *)port->mapbase, port->membase, - port->irq, port->uartclk); - - /* Setup the port parameters accoding to options */ - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow); - - pr_debug("Setting console parameters: %i %i%c1 flow=%c\n", - baud, bits, parity, flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - - -static struct uart_driver mpc52xx_uart_driver; - -static struct console mpc52xx_console = { - .name = "ttyPSC", - .write = mpc52xx_console_write, - .device = uart_console_device, - .setup = mpc52xx_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0) */ - .data = &mpc52xx_uart_driver, -}; - - -static int __init -mpc52xx_console_init(void) -{ - mpc52xx_uart_of_enumerate(); - register_console(&mpc52xx_console); - return 0; -} - -console_initcall(mpc52xx_console_init); - -#define MPC52xx_PSC_CONSOLE &mpc52xx_console -#else -#define MPC52xx_PSC_CONSOLE NULL -#endif - - -/* ======================================================================== */ -/* UART Driver */ -/* ======================================================================== */ - -static struct uart_driver mpc52xx_uart_driver = { - .driver_name = "mpc52xx_psc_uart", - .dev_name = "ttyPSC", - .major = SERIAL_PSC_MAJOR, - .minor = SERIAL_PSC_MINOR, - .nr = MPC52xx_PSC_MAXNUM, - .cons = MPC52xx_PSC_CONSOLE, -}; - -/* ======================================================================== */ -/* OF Platform Driver */ -/* ======================================================================== */ - -static struct of_device_id mpc52xx_uart_of_match[] = { -#ifdef CONFIG_PPC_MPC52xx - { .compatible = "fsl,mpc5200b-psc-uart", .data = &mpc5200b_psc_ops, }, - { .compatible = "fsl,mpc5200-psc-uart", .data = &mpc52xx_psc_ops, }, - /* binding used by old lite5200 device trees: */ - { .compatible = "mpc5200-psc-uart", .data = &mpc52xx_psc_ops, }, - /* binding used by efika: */ - { .compatible = "mpc5200-serial", .data = &mpc52xx_psc_ops, }, -#endif -#ifdef CONFIG_PPC_MPC512x - { .compatible = "fsl,mpc5121-psc-uart", .data = &mpc512x_psc_ops, }, -#endif - {}, -}; - -static int __devinit -mpc52xx_uart_of_probe(struct platform_device *op, const struct of_device_id *match) -{ - int idx = -1; - unsigned int uartclk; - struct uart_port *port = NULL; - struct resource res; - int ret; - - dev_dbg(&op->dev, "mpc52xx_uart_probe(op=%p, match=%p)\n", op, match); - - /* Check validity & presence */ - for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++) - if (mpc52xx_uart_nodes[idx] == op->dev.of_node) - break; - if (idx >= MPC52xx_PSC_MAXNUM) - return -EINVAL; - pr_debug("Found %s assigned to ttyPSC%x\n", - mpc52xx_uart_nodes[idx]->full_name, idx); - - /* set the uart clock to the input clock of the psc, the different - * prescalers are taken into account in the set_baudrate() methods - * of the respective chip */ - uartclk = mpc5xxx_get_bus_frequency(op->dev.of_node); - if (uartclk == 0) { - dev_dbg(&op->dev, "Could not find uart clock frequency!\n"); - return -EINVAL; - } - - /* Init the port structure */ - port = &mpc52xx_uart_ports[idx]; - - spin_lock_init(&port->lock); - port->uartclk = uartclk; - port->fifosize = 512; - port->iotype = UPIO_MEM; - port->flags = UPF_BOOT_AUTOCONF | - (uart_console(port) ? 0 : UPF_IOREMAP); - port->line = idx; - port->ops = &mpc52xx_uart_ops; - port->dev = &op->dev; - - /* Search for IRQ and mapbase */ - ret = of_address_to_resource(op->dev.of_node, 0, &res); - if (ret) - return ret; - - port->mapbase = res.start; - if (!port->mapbase) { - dev_dbg(&op->dev, "Could not allocate resources for PSC\n"); - return -EINVAL; - } - - psc_ops->get_irq(port, op->dev.of_node); - if (port->irq == NO_IRQ) { - dev_dbg(&op->dev, "Could not get irq\n"); - return -EINVAL; - } - - dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n", - (void *)port->mapbase, port->irq, port->uartclk); - - /* Add the port to the uart sub-system */ - ret = uart_add_one_port(&mpc52xx_uart_driver, port); - if (ret) - return ret; - - dev_set_drvdata(&op->dev, (void *)port); - return 0; -} - -static int -mpc52xx_uart_of_remove(struct platform_device *op) -{ - struct uart_port *port = dev_get_drvdata(&op->dev); - dev_set_drvdata(&op->dev, NULL); - - if (port) - uart_remove_one_port(&mpc52xx_uart_driver, port); - - return 0; -} - -#ifdef CONFIG_PM -static int -mpc52xx_uart_of_suspend(struct platform_device *op, pm_message_t state) -{ - struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev); - - if (port) - uart_suspend_port(&mpc52xx_uart_driver, port); - - return 0; -} - -static int -mpc52xx_uart_of_resume(struct platform_device *op) -{ - struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev); - - if (port) - uart_resume_port(&mpc52xx_uart_driver, port); - - return 0; -} -#endif - -static void -mpc52xx_uart_of_assign(struct device_node *np) -{ - int i; - - /* Find the first free PSC number */ - for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { - if (mpc52xx_uart_nodes[i] == NULL) { - of_node_get(np); - mpc52xx_uart_nodes[i] = np; - return; - } - } -} - -static void -mpc52xx_uart_of_enumerate(void) -{ - static int enum_done; - struct device_node *np; - const struct of_device_id *match; - int i; - - if (enum_done) - return; - - /* Assign index to each PSC in device tree */ - for_each_matching_node(np, mpc52xx_uart_of_match) { - match = of_match_node(mpc52xx_uart_of_match, np); - psc_ops = match->data; - mpc52xx_uart_of_assign(np); - } - - enum_done = 1; - - for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { - if (mpc52xx_uart_nodes[i]) - pr_debug("%s assigned to ttyPSC%x\n", - mpc52xx_uart_nodes[i]->full_name, i); - } -} - -MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match); - -static struct of_platform_driver mpc52xx_uart_of_driver = { - .probe = mpc52xx_uart_of_probe, - .remove = mpc52xx_uart_of_remove, -#ifdef CONFIG_PM - .suspend = mpc52xx_uart_of_suspend, - .resume = mpc52xx_uart_of_resume, -#endif - .driver = { - .name = "mpc52xx-psc-uart", - .owner = THIS_MODULE, - .of_match_table = mpc52xx_uart_of_match, - }, -}; - - -/* ======================================================================== */ -/* Module */ -/* ======================================================================== */ - -static int __init -mpc52xx_uart_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n"); - - ret = uart_register_driver(&mpc52xx_uart_driver); - if (ret) { - printk(KERN_ERR "%s: uart_register_driver failed (%i)\n", - __FILE__, ret); - return ret; - } - - mpc52xx_uart_of_enumerate(); - - /* - * Map the PSC FIFO Controller and init if on MPC512x. - */ - if (psc_ops && psc_ops->fifoc_init) { - ret = psc_ops->fifoc_init(); - if (ret) - return ret; - } - - ret = of_register_platform_driver(&mpc52xx_uart_of_driver); - if (ret) { - printk(KERN_ERR "%s: of_register_platform_driver failed (%i)\n", - __FILE__, ret); - uart_unregister_driver(&mpc52xx_uart_driver); - return ret; - } - - return 0; -} - -static void __exit -mpc52xx_uart_exit(void) -{ - if (psc_ops->fifoc_uninit) - psc_ops->fifoc_uninit(); - - of_unregister_platform_driver(&mpc52xx_uart_of_driver); - uart_unregister_driver(&mpc52xx_uart_driver); -} - - -module_init(mpc52xx_uart_init); -module_exit(mpc52xx_uart_exit); - -MODULE_AUTHOR("Sylvain Munaut "); -MODULE_DESCRIPTION("Freescale MPC52xx PSC UART"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c deleted file mode 100644 index 6a9c6605666a..000000000000 --- a/drivers/serial/mpsc.c +++ /dev/null @@ -1,2159 +0,0 @@ -/* - * Generic driver for the MPSC (UART mode) on Marvell parts (e.g., GT64240, - * GT64260, MV64340, MV64360, GT96100, ... ). - * - * Author: Mark A. Greer - * - * Based on an old MPSC driver that was in the linuxppc tree. It appears to - * have been created by Chris Zankel (formerly of MontaVista) but there - * is no proper Copyright so I'm not sure. Apparently, parts were also - * taken from PPCBoot (now U-Boot). Also based on drivers/serial/8250.c - * by Russell King. - * - * 2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -/* - * The MPSC interface is much like a typical network controller's interface. - * That is, you set up separate rings of descriptors for transmitting and - * receiving data. There is also a pool of buffers with (one buffer per - * descriptor) that incoming data are dma'd into or outgoing data are dma'd - * out of. - * - * The MPSC requires two other controllers to be able to work. The Baud Rate - * Generator (BRG) provides a clock at programmable frequencies which determines - * the baud rate. The Serial DMA Controller (SDMA) takes incoming data from the - * MPSC and DMA's it into memory or DMA's outgoing data and passes it to the - * MPSC. It is actually the SDMA interrupt that the driver uses to keep the - * transmit and receive "engines" going (i.e., indicate data has been - * transmitted or received). - * - * NOTES: - * - * 1) Some chips have an erratum where several regs cannot be - * read. To work around that, we keep a local copy of those regs in - * 'mpsc_port_info'. - * - * 2) Some chips have an erratum where the ctlr will hang when the SDMA ctlr - * accesses system mem with coherency enabled. For that reason, the driver - * assumes that coherency for that ctlr has been disabled. This means - * that when in a cache coherent system, the driver has to manually manage - * the data cache on the areas that it touches because the dma_* macro are - * basically no-ops. - * - * 3) There is an erratum (on PPC) where you can't use the instruction to do - * a DMA_TO_DEVICE/cache clean so DMA_BIDIRECTIONAL/flushes are used in places - * where a DMA_TO_DEVICE/clean would have [otherwise] sufficed. - * - * 4) AFAICT, hardware flow control isn't supported by the controller --MAG. - */ - - -#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define MPSC_NUM_CTLRS 2 - -/* - * Descriptors and buffers must be cache line aligned. - * Buffers lengths must be multiple of cache line size. - * Number of Tx & Rx descriptors must be powers of 2. - */ -#define MPSC_RXR_ENTRIES 32 -#define MPSC_RXRE_SIZE dma_get_cache_alignment() -#define MPSC_RXR_SIZE (MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE) -#define MPSC_RXBE_SIZE dma_get_cache_alignment() -#define MPSC_RXB_SIZE (MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE) - -#define MPSC_TXR_ENTRIES 32 -#define MPSC_TXRE_SIZE dma_get_cache_alignment() -#define MPSC_TXR_SIZE (MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE) -#define MPSC_TXBE_SIZE dma_get_cache_alignment() -#define MPSC_TXB_SIZE (MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE) - -#define MPSC_DMA_ALLOC_SIZE (MPSC_RXR_SIZE + MPSC_RXB_SIZE + MPSC_TXR_SIZE \ - + MPSC_TXB_SIZE + dma_get_cache_alignment() /* for alignment */) - -/* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */ -struct mpsc_rx_desc { - u16 bufsize; - u16 bytecnt; - u32 cmdstat; - u32 link; - u32 buf_ptr; -} __attribute((packed)); - -struct mpsc_tx_desc { - u16 bytecnt; - u16 shadow; - u32 cmdstat; - u32 link; - u32 buf_ptr; -} __attribute((packed)); - -/* - * Some regs that have the erratum that you can't read them are are shared - * between the two MPSC controllers. This struct contains those shared regs. - */ -struct mpsc_shared_regs { - phys_addr_t mpsc_routing_base_p; - phys_addr_t sdma_intr_base_p; - - void __iomem *mpsc_routing_base; - void __iomem *sdma_intr_base; - - u32 MPSC_MRR_m; - u32 MPSC_RCRR_m; - u32 MPSC_TCRR_m; - u32 SDMA_INTR_CAUSE_m; - u32 SDMA_INTR_MASK_m; -}; - -/* The main driver data structure */ -struct mpsc_port_info { - struct uart_port port; /* Overlay uart_port structure */ - - /* Internal driver state for this ctlr */ - u8 ready; - u8 rcv_data; - tcflag_t c_iflag; /* save termios->c_iflag */ - tcflag_t c_cflag; /* save termios->c_cflag */ - - /* Info passed in from platform */ - u8 mirror_regs; /* Need to mirror regs? */ - u8 cache_mgmt; /* Need manual cache mgmt? */ - u8 brg_can_tune; /* BRG has baud tuning? */ - u32 brg_clk_src; - u16 mpsc_max_idle; - int default_baud; - int default_bits; - int default_parity; - int default_flow; - - /* Physical addresses of various blocks of registers (from platform) */ - phys_addr_t mpsc_base_p; - phys_addr_t sdma_base_p; - phys_addr_t brg_base_p; - - /* Virtual addresses of various blocks of registers (from platform) */ - void __iomem *mpsc_base; - void __iomem *sdma_base; - void __iomem *brg_base; - - /* Descriptor ring and buffer allocations */ - void *dma_region; - dma_addr_t dma_region_p; - - dma_addr_t rxr; /* Rx descriptor ring */ - dma_addr_t rxr_p; /* Phys addr of rxr */ - u8 *rxb; /* Rx Ring I/O buf */ - u8 *rxb_p; /* Phys addr of rxb */ - u32 rxr_posn; /* First desc w/ Rx data */ - - dma_addr_t txr; /* Tx descriptor ring */ - dma_addr_t txr_p; /* Phys addr of txr */ - u8 *txb; /* Tx Ring I/O buf */ - u8 *txb_p; /* Phys addr of txb */ - int txr_head; /* Where new data goes */ - int txr_tail; /* Where sent data comes off */ - spinlock_t tx_lock; /* transmit lock */ - - /* Mirrored values of regs we can't read (if 'mirror_regs' set) */ - u32 MPSC_MPCR_m; - u32 MPSC_CHR_1_m; - u32 MPSC_CHR_2_m; - u32 MPSC_CHR_10_m; - u32 BRG_BCR_m; - struct mpsc_shared_regs *shared_regs; -}; - -/* Hooks to platform-specific code */ -int mpsc_platform_register_driver(void); -void mpsc_platform_unregister_driver(void); - -/* Hooks back in to mpsc common to be called by platform-specific code */ -struct mpsc_port_info *mpsc_device_probe(int index); -struct mpsc_port_info *mpsc_device_remove(int index); - -/* Main MPSC Configuration Register Offsets */ -#define MPSC_MMCRL 0x0000 -#define MPSC_MMCRH 0x0004 -#define MPSC_MPCR 0x0008 -#define MPSC_CHR_1 0x000c -#define MPSC_CHR_2 0x0010 -#define MPSC_CHR_3 0x0014 -#define MPSC_CHR_4 0x0018 -#define MPSC_CHR_5 0x001c -#define MPSC_CHR_6 0x0020 -#define MPSC_CHR_7 0x0024 -#define MPSC_CHR_8 0x0028 -#define MPSC_CHR_9 0x002c -#define MPSC_CHR_10 0x0030 -#define MPSC_CHR_11 0x0034 - -#define MPSC_MPCR_FRZ (1 << 9) -#define MPSC_MPCR_CL_5 0 -#define MPSC_MPCR_CL_6 1 -#define MPSC_MPCR_CL_7 2 -#define MPSC_MPCR_CL_8 3 -#define MPSC_MPCR_SBL_1 0 -#define MPSC_MPCR_SBL_2 1 - -#define MPSC_CHR_2_TEV (1<<1) -#define MPSC_CHR_2_TA (1<<7) -#define MPSC_CHR_2_TTCS (1<<9) -#define MPSC_CHR_2_REV (1<<17) -#define MPSC_CHR_2_RA (1<<23) -#define MPSC_CHR_2_CRD (1<<25) -#define MPSC_CHR_2_EH (1<<31) -#define MPSC_CHR_2_PAR_ODD 0 -#define MPSC_CHR_2_PAR_SPACE 1 -#define MPSC_CHR_2_PAR_EVEN 2 -#define MPSC_CHR_2_PAR_MARK 3 - -/* MPSC Signal Routing */ -#define MPSC_MRR 0x0000 -#define MPSC_RCRR 0x0004 -#define MPSC_TCRR 0x0008 - -/* Serial DMA Controller Interface Registers */ -#define SDMA_SDC 0x0000 -#define SDMA_SDCM 0x0008 -#define SDMA_RX_DESC 0x0800 -#define SDMA_RX_BUF_PTR 0x0808 -#define SDMA_SCRDP 0x0810 -#define SDMA_TX_DESC 0x0c00 -#define SDMA_SCTDP 0x0c10 -#define SDMA_SFTDP 0x0c14 - -#define SDMA_DESC_CMDSTAT_PE (1<<0) -#define SDMA_DESC_CMDSTAT_CDL (1<<1) -#define SDMA_DESC_CMDSTAT_FR (1<<3) -#define SDMA_DESC_CMDSTAT_OR (1<<6) -#define SDMA_DESC_CMDSTAT_BR (1<<9) -#define SDMA_DESC_CMDSTAT_MI (1<<10) -#define SDMA_DESC_CMDSTAT_A (1<<11) -#define SDMA_DESC_CMDSTAT_AM (1<<12) -#define SDMA_DESC_CMDSTAT_CT (1<<13) -#define SDMA_DESC_CMDSTAT_C (1<<14) -#define SDMA_DESC_CMDSTAT_ES (1<<15) -#define SDMA_DESC_CMDSTAT_L (1<<16) -#define SDMA_DESC_CMDSTAT_F (1<<17) -#define SDMA_DESC_CMDSTAT_P (1<<18) -#define SDMA_DESC_CMDSTAT_EI (1<<23) -#define SDMA_DESC_CMDSTAT_O (1<<31) - -#define SDMA_DESC_DFLT (SDMA_DESC_CMDSTAT_O \ - | SDMA_DESC_CMDSTAT_EI) - -#define SDMA_SDC_RFT (1<<0) -#define SDMA_SDC_SFM (1<<1) -#define SDMA_SDC_BLMR (1<<6) -#define SDMA_SDC_BLMT (1<<7) -#define SDMA_SDC_POVR (1<<8) -#define SDMA_SDC_RIFB (1<<9) - -#define SDMA_SDCM_ERD (1<<7) -#define SDMA_SDCM_AR (1<<15) -#define SDMA_SDCM_STD (1<<16) -#define SDMA_SDCM_TXD (1<<23) -#define SDMA_SDCM_AT (1<<31) - -#define SDMA_0_CAUSE_RXBUF (1<<0) -#define SDMA_0_CAUSE_RXERR (1<<1) -#define SDMA_0_CAUSE_TXBUF (1<<2) -#define SDMA_0_CAUSE_TXEND (1<<3) -#define SDMA_1_CAUSE_RXBUF (1<<8) -#define SDMA_1_CAUSE_RXERR (1<<9) -#define SDMA_1_CAUSE_TXBUF (1<<10) -#define SDMA_1_CAUSE_TXEND (1<<11) - -#define SDMA_CAUSE_RX_MASK (SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR \ - | SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR) -#define SDMA_CAUSE_TX_MASK (SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND \ - | SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND) - -/* SDMA Interrupt registers */ -#define SDMA_INTR_CAUSE 0x0000 -#define SDMA_INTR_MASK 0x0080 - -/* Baud Rate Generator Interface Registers */ -#define BRG_BCR 0x0000 -#define BRG_BTR 0x0004 - -/* - * Define how this driver is known to the outside (we've been assigned a - * range on the "Low-density serial ports" major). - */ -#define MPSC_MAJOR 204 -#define MPSC_MINOR_START 44 -#define MPSC_DRIVER_NAME "MPSC" -#define MPSC_DEV_NAME "ttyMM" -#define MPSC_VERSION "1.00" - -static struct mpsc_port_info mpsc_ports[MPSC_NUM_CTLRS]; -static struct mpsc_shared_regs mpsc_shared_regs; -static struct uart_driver mpsc_reg; - -static void mpsc_start_rx(struct mpsc_port_info *pi); -static void mpsc_free_ring_mem(struct mpsc_port_info *pi); -static void mpsc_release_port(struct uart_port *port); -/* - ****************************************************************************** - * - * Baud Rate Generator Routines (BRG) - * - ****************************************************************************** - */ -static void mpsc_brg_init(struct mpsc_port_info *pi, u32 clk_src) -{ - u32 v; - - v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); - v = (v & ~(0xf << 18)) | ((clk_src & 0xf) << 18); - - if (pi->brg_can_tune) - v &= ~(1 << 25); - - if (pi->mirror_regs) - pi->BRG_BCR_m = v; - writel(v, pi->brg_base + BRG_BCR); - - writel(readl(pi->brg_base + BRG_BTR) & 0xffff0000, - pi->brg_base + BRG_BTR); -} - -static void mpsc_brg_enable(struct mpsc_port_info *pi) -{ - u32 v; - - v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); - v |= (1 << 16); - - if (pi->mirror_regs) - pi->BRG_BCR_m = v; - writel(v, pi->brg_base + BRG_BCR); -} - -static void mpsc_brg_disable(struct mpsc_port_info *pi) -{ - u32 v; - - v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); - v &= ~(1 << 16); - - if (pi->mirror_regs) - pi->BRG_BCR_m = v; - writel(v, pi->brg_base + BRG_BCR); -} - -/* - * To set the baud, we adjust the CDV field in the BRG_BCR reg. - * From manual: Baud = clk / ((CDV+1)*2) ==> CDV = (clk / (baud*2)) - 1. - * However, the input clock is divided by 16 in the MPSC b/c of how - * 'MPSC_MMCRH' was set up so we have to divide the 'clk' used in our - * calculation by 16 to account for that. So the real calculation - * that accounts for the way the mpsc is set up is: - * CDV = (clk / (baud*2*16)) - 1 ==> CDV = (clk / (baud << 5)) - 1. - */ -static void mpsc_set_baudrate(struct mpsc_port_info *pi, u32 baud) -{ - u32 cdv = (pi->port.uartclk / (baud << 5)) - 1; - u32 v; - - mpsc_brg_disable(pi); - v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); - v = (v & 0xffff0000) | (cdv & 0xffff); - - if (pi->mirror_regs) - pi->BRG_BCR_m = v; - writel(v, pi->brg_base + BRG_BCR); - mpsc_brg_enable(pi); -} - -/* - ****************************************************************************** - * - * Serial DMA Routines (SDMA) - * - ****************************************************************************** - */ - -static void mpsc_sdma_burstsize(struct mpsc_port_info *pi, u32 burst_size) -{ - u32 v; - - pr_debug("mpsc_sdma_burstsize[%d]: burst_size: %d\n", - pi->port.line, burst_size); - - burst_size >>= 3; /* Divide by 8 b/c reg values are 8-byte chunks */ - - if (burst_size < 2) - v = 0x0; /* 1 64-bit word */ - else if (burst_size < 4) - v = 0x1; /* 2 64-bit words */ - else if (burst_size < 8) - v = 0x2; /* 4 64-bit words */ - else - v = 0x3; /* 8 64-bit words */ - - writel((readl(pi->sdma_base + SDMA_SDC) & (0x3 << 12)) | (v << 12), - pi->sdma_base + SDMA_SDC); -} - -static void mpsc_sdma_init(struct mpsc_port_info *pi, u32 burst_size) -{ - pr_debug("mpsc_sdma_init[%d]: burst_size: %d\n", pi->port.line, - burst_size); - - writel((readl(pi->sdma_base + SDMA_SDC) & 0x3ff) | 0x03f, - pi->sdma_base + SDMA_SDC); - mpsc_sdma_burstsize(pi, burst_size); -} - -static u32 mpsc_sdma_intr_mask(struct mpsc_port_info *pi, u32 mask) -{ - u32 old, v; - - pr_debug("mpsc_sdma_intr_mask[%d]: mask: 0x%x\n", pi->port.line, mask); - - old = v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m : - readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); - - mask &= 0xf; - if (pi->port.line) - mask <<= 8; - v &= ~mask; - - if (pi->mirror_regs) - pi->shared_regs->SDMA_INTR_MASK_m = v; - writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); - - if (pi->port.line) - old >>= 8; - return old & 0xf; -} - -static void mpsc_sdma_intr_unmask(struct mpsc_port_info *pi, u32 mask) -{ - u32 v; - - pr_debug("mpsc_sdma_intr_unmask[%d]: mask: 0x%x\n", pi->port.line,mask); - - v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m - : readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); - - mask &= 0xf; - if (pi->port.line) - mask <<= 8; - v |= mask; - - if (pi->mirror_regs) - pi->shared_regs->SDMA_INTR_MASK_m = v; - writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); -} - -static void mpsc_sdma_intr_ack(struct mpsc_port_info *pi) -{ - pr_debug("mpsc_sdma_intr_ack[%d]: Acknowledging IRQ\n", pi->port.line); - - if (pi->mirror_regs) - pi->shared_regs->SDMA_INTR_CAUSE_m = 0; - writeb(0x00, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE - + pi->port.line); -} - -static void mpsc_sdma_set_rx_ring(struct mpsc_port_info *pi, - struct mpsc_rx_desc *rxre_p) -{ - pr_debug("mpsc_sdma_set_rx_ring[%d]: rxre_p: 0x%x\n", - pi->port.line, (u32)rxre_p); - - writel((u32)rxre_p, pi->sdma_base + SDMA_SCRDP); -} - -static void mpsc_sdma_set_tx_ring(struct mpsc_port_info *pi, - struct mpsc_tx_desc *txre_p) -{ - writel((u32)txre_p, pi->sdma_base + SDMA_SFTDP); - writel((u32)txre_p, pi->sdma_base + SDMA_SCTDP); -} - -static void mpsc_sdma_cmd(struct mpsc_port_info *pi, u32 val) -{ - u32 v; - - v = readl(pi->sdma_base + SDMA_SDCM); - if (val) - v |= val; - else - v = 0; - wmb(); - writel(v, pi->sdma_base + SDMA_SDCM); - wmb(); -} - -static uint mpsc_sdma_tx_active(struct mpsc_port_info *pi) -{ - return readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_TXD; -} - -static void mpsc_sdma_start_tx(struct mpsc_port_info *pi) -{ - struct mpsc_tx_desc *txre, *txre_p; - - /* If tx isn't running & there's a desc ready to go, start it */ - if (!mpsc_sdma_tx_active(pi)) { - txre = (struct mpsc_tx_desc *)(pi->txr - + (pi->txr_tail * MPSC_TXRE_SIZE)); - dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE, - DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)txre, - (ulong)txre + MPSC_TXRE_SIZE); -#endif - - if (be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O) { - txre_p = (struct mpsc_tx_desc *) - (pi->txr_p + (pi->txr_tail * MPSC_TXRE_SIZE)); - - mpsc_sdma_set_tx_ring(pi, txre_p); - mpsc_sdma_cmd(pi, SDMA_SDCM_STD | SDMA_SDCM_TXD); - } - } -} - -static void mpsc_sdma_stop(struct mpsc_port_info *pi) -{ - pr_debug("mpsc_sdma_stop[%d]: Stopping SDMA\n", pi->port.line); - - /* Abort any SDMA transfers */ - mpsc_sdma_cmd(pi, 0); - mpsc_sdma_cmd(pi, SDMA_SDCM_AR | SDMA_SDCM_AT); - - /* Clear the SDMA current and first TX and RX pointers */ - mpsc_sdma_set_tx_ring(pi, NULL); - mpsc_sdma_set_rx_ring(pi, NULL); - - /* Disable interrupts */ - mpsc_sdma_intr_mask(pi, 0xf); - mpsc_sdma_intr_ack(pi); -} - -/* - ****************************************************************************** - * - * Multi-Protocol Serial Controller Routines (MPSC) - * - ****************************************************************************** - */ - -static void mpsc_hw_init(struct mpsc_port_info *pi) -{ - u32 v; - - pr_debug("mpsc_hw_init[%d]: Initializing hardware\n", pi->port.line); - - /* Set up clock routing */ - if (pi->mirror_regs) { - v = pi->shared_regs->MPSC_MRR_m; - v &= ~0x1c7; - pi->shared_regs->MPSC_MRR_m = v; - writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR); - - v = pi->shared_regs->MPSC_RCRR_m; - v = (v & ~0xf0f) | 0x100; - pi->shared_regs->MPSC_RCRR_m = v; - writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR); - - v = pi->shared_regs->MPSC_TCRR_m; - v = (v & ~0xf0f) | 0x100; - pi->shared_regs->MPSC_TCRR_m = v; - writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR); - } else { - v = readl(pi->shared_regs->mpsc_routing_base + MPSC_MRR); - v &= ~0x1c7; - writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR); - - v = readl(pi->shared_regs->mpsc_routing_base + MPSC_RCRR); - v = (v & ~0xf0f) | 0x100; - writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR); - - v = readl(pi->shared_regs->mpsc_routing_base + MPSC_TCRR); - v = (v & ~0xf0f) | 0x100; - writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR); - } - - /* Put MPSC in UART mode & enabel Tx/Rx egines */ - writel(0x000004c4, pi->mpsc_base + MPSC_MMCRL); - - /* No preamble, 16x divider, low-latency, */ - writel(0x04400400, pi->mpsc_base + MPSC_MMCRH); - mpsc_set_baudrate(pi, pi->default_baud); - - if (pi->mirror_regs) { - pi->MPSC_CHR_1_m = 0; - pi->MPSC_CHR_2_m = 0; - } - writel(0, pi->mpsc_base + MPSC_CHR_1); - writel(0, pi->mpsc_base + MPSC_CHR_2); - writel(pi->mpsc_max_idle, pi->mpsc_base + MPSC_CHR_3); - writel(0, pi->mpsc_base + MPSC_CHR_4); - writel(0, pi->mpsc_base + MPSC_CHR_5); - writel(0, pi->mpsc_base + MPSC_CHR_6); - writel(0, pi->mpsc_base + MPSC_CHR_7); - writel(0, pi->mpsc_base + MPSC_CHR_8); - writel(0, pi->mpsc_base + MPSC_CHR_9); - writel(0, pi->mpsc_base + MPSC_CHR_10); -} - -static void mpsc_enter_hunt(struct mpsc_port_info *pi) -{ - pr_debug("mpsc_enter_hunt[%d]: Hunting...\n", pi->port.line); - - if (pi->mirror_regs) { - writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_EH, - pi->mpsc_base + MPSC_CHR_2); - /* Erratum prevents reading CHR_2 so just delay for a while */ - udelay(100); - } else { - writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_EH, - pi->mpsc_base + MPSC_CHR_2); - - while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_EH) - udelay(10); - } -} - -static void mpsc_freeze(struct mpsc_port_info *pi) -{ - u32 v; - - pr_debug("mpsc_freeze[%d]: Freezing\n", pi->port.line); - - v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : - readl(pi->mpsc_base + MPSC_MPCR); - v |= MPSC_MPCR_FRZ; - - if (pi->mirror_regs) - pi->MPSC_MPCR_m = v; - writel(v, pi->mpsc_base + MPSC_MPCR); -} - -static void mpsc_unfreeze(struct mpsc_port_info *pi) -{ - u32 v; - - v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : - readl(pi->mpsc_base + MPSC_MPCR); - v &= ~MPSC_MPCR_FRZ; - - if (pi->mirror_regs) - pi->MPSC_MPCR_m = v; - writel(v, pi->mpsc_base + MPSC_MPCR); - - pr_debug("mpsc_unfreeze[%d]: Unfrozen\n", pi->port.line); -} - -static void mpsc_set_char_length(struct mpsc_port_info *pi, u32 len) -{ - u32 v; - - pr_debug("mpsc_set_char_length[%d]: char len: %d\n", pi->port.line,len); - - v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : - readl(pi->mpsc_base + MPSC_MPCR); - v = (v & ~(0x3 << 12)) | ((len & 0x3) << 12); - - if (pi->mirror_regs) - pi->MPSC_MPCR_m = v; - writel(v, pi->mpsc_base + MPSC_MPCR); -} - -static void mpsc_set_stop_bit_length(struct mpsc_port_info *pi, u32 len) -{ - u32 v; - - pr_debug("mpsc_set_stop_bit_length[%d]: stop bits: %d\n", - pi->port.line, len); - - v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : - readl(pi->mpsc_base + MPSC_MPCR); - - v = (v & ~(1 << 14)) | ((len & 0x1) << 14); - - if (pi->mirror_regs) - pi->MPSC_MPCR_m = v; - writel(v, pi->mpsc_base + MPSC_MPCR); -} - -static void mpsc_set_parity(struct mpsc_port_info *pi, u32 p) -{ - u32 v; - - pr_debug("mpsc_set_parity[%d]: parity bits: 0x%x\n", pi->port.line, p); - - v = (pi->mirror_regs) ? pi->MPSC_CHR_2_m : - readl(pi->mpsc_base + MPSC_CHR_2); - - p &= 0x3; - v = (v & ~0xc000c) | (p << 18) | (p << 2); - - if (pi->mirror_regs) - pi->MPSC_CHR_2_m = v; - writel(v, pi->mpsc_base + MPSC_CHR_2); -} - -/* - ****************************************************************************** - * - * Driver Init Routines - * - ****************************************************************************** - */ - -static void mpsc_init_hw(struct mpsc_port_info *pi) -{ - pr_debug("mpsc_init_hw[%d]: Initializing\n", pi->port.line); - - mpsc_brg_init(pi, pi->brg_clk_src); - mpsc_brg_enable(pi); - mpsc_sdma_init(pi, dma_get_cache_alignment()); /* burst a cacheline */ - mpsc_sdma_stop(pi); - mpsc_hw_init(pi); -} - -static int mpsc_alloc_ring_mem(struct mpsc_port_info *pi) -{ - int rc = 0; - - pr_debug("mpsc_alloc_ring_mem[%d]: Allocating ring mem\n", - pi->port.line); - - if (!pi->dma_region) { - if (!dma_supported(pi->port.dev, 0xffffffff)) { - printk(KERN_ERR "MPSC: Inadequate DMA support\n"); - rc = -ENXIO; - } else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev, - MPSC_DMA_ALLOC_SIZE, - &pi->dma_region_p, GFP_KERNEL)) - == NULL) { - printk(KERN_ERR "MPSC: Can't alloc Desc region\n"); - rc = -ENOMEM; - } - } - - return rc; -} - -static void mpsc_free_ring_mem(struct mpsc_port_info *pi) -{ - pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line); - - if (pi->dma_region) { - dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE, - pi->dma_region, pi->dma_region_p); - pi->dma_region = NULL; - pi->dma_region_p = (dma_addr_t)NULL; - } -} - -static void mpsc_init_rings(struct mpsc_port_info *pi) -{ - struct mpsc_rx_desc *rxre; - struct mpsc_tx_desc *txre; - dma_addr_t dp, dp_p; - u8 *bp, *bp_p; - int i; - - pr_debug("mpsc_init_rings[%d]: Initializing rings\n", pi->port.line); - - BUG_ON(pi->dma_region == NULL); - - memset(pi->dma_region, 0, MPSC_DMA_ALLOC_SIZE); - - /* - * Descriptors & buffers are multiples of cacheline size and must be - * cacheline aligned. - */ - dp = ALIGN((u32)pi->dma_region, dma_get_cache_alignment()); - dp_p = ALIGN((u32)pi->dma_region_p, dma_get_cache_alignment()); - - /* - * Partition dma region into rx ring descriptor, rx buffers, - * tx ring descriptors, and tx buffers. - */ - pi->rxr = dp; - pi->rxr_p = dp_p; - dp += MPSC_RXR_SIZE; - dp_p += MPSC_RXR_SIZE; - - pi->rxb = (u8 *)dp; - pi->rxb_p = (u8 *)dp_p; - dp += MPSC_RXB_SIZE; - dp_p += MPSC_RXB_SIZE; - - pi->rxr_posn = 0; - - pi->txr = dp; - pi->txr_p = dp_p; - dp += MPSC_TXR_SIZE; - dp_p += MPSC_TXR_SIZE; - - pi->txb = (u8 *)dp; - pi->txb_p = (u8 *)dp_p; - - pi->txr_head = 0; - pi->txr_tail = 0; - - /* Init rx ring descriptors */ - dp = pi->rxr; - dp_p = pi->rxr_p; - bp = pi->rxb; - bp_p = pi->rxb_p; - - for (i = 0; i < MPSC_RXR_ENTRIES; i++) { - rxre = (struct mpsc_rx_desc *)dp; - - rxre->bufsize = cpu_to_be16(MPSC_RXBE_SIZE); - rxre->bytecnt = cpu_to_be16(0); - rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O - | SDMA_DESC_CMDSTAT_EI | SDMA_DESC_CMDSTAT_F - | SDMA_DESC_CMDSTAT_L); - rxre->link = cpu_to_be32(dp_p + MPSC_RXRE_SIZE); - rxre->buf_ptr = cpu_to_be32(bp_p); - - dp += MPSC_RXRE_SIZE; - dp_p += MPSC_RXRE_SIZE; - bp += MPSC_RXBE_SIZE; - bp_p += MPSC_RXBE_SIZE; - } - rxre->link = cpu_to_be32(pi->rxr_p); /* Wrap last back to first */ - - /* Init tx ring descriptors */ - dp = pi->txr; - dp_p = pi->txr_p; - bp = pi->txb; - bp_p = pi->txb_p; - - for (i = 0; i < MPSC_TXR_ENTRIES; i++) { - txre = (struct mpsc_tx_desc *)dp; - - txre->link = cpu_to_be32(dp_p + MPSC_TXRE_SIZE); - txre->buf_ptr = cpu_to_be32(bp_p); - - dp += MPSC_TXRE_SIZE; - dp_p += MPSC_TXRE_SIZE; - bp += MPSC_TXBE_SIZE; - bp_p += MPSC_TXBE_SIZE; - } - txre->link = cpu_to_be32(pi->txr_p); /* Wrap last back to first */ - - dma_cache_sync(pi->port.dev, (void *)pi->dma_region, - MPSC_DMA_ALLOC_SIZE, DMA_BIDIRECTIONAL); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - flush_dcache_range((ulong)pi->dma_region, - (ulong)pi->dma_region - + MPSC_DMA_ALLOC_SIZE); -#endif - - return; -} - -static void mpsc_uninit_rings(struct mpsc_port_info *pi) -{ - pr_debug("mpsc_uninit_rings[%d]: Uninitializing rings\n",pi->port.line); - - BUG_ON(pi->dma_region == NULL); - - pi->rxr = 0; - pi->rxr_p = 0; - pi->rxb = NULL; - pi->rxb_p = NULL; - pi->rxr_posn = 0; - - pi->txr = 0; - pi->txr_p = 0; - pi->txb = NULL; - pi->txb_p = NULL; - pi->txr_head = 0; - pi->txr_tail = 0; -} - -static int mpsc_make_ready(struct mpsc_port_info *pi) -{ - int rc; - - pr_debug("mpsc_make_ready[%d]: Making cltr ready\n", pi->port.line); - - if (!pi->ready) { - mpsc_init_hw(pi); - if ((rc = mpsc_alloc_ring_mem(pi))) - return rc; - mpsc_init_rings(pi); - pi->ready = 1; - } - - return 0; -} - -#ifdef CONFIG_CONSOLE_POLL -static int serial_polled; -#endif - -/* - ****************************************************************************** - * - * Interrupt Handling Routines - * - ****************************************************************************** - */ - -static int mpsc_rx_intr(struct mpsc_port_info *pi) -{ - struct mpsc_rx_desc *rxre; - struct tty_struct *tty = pi->port.state->port.tty; - u32 cmdstat, bytes_in, i; - int rc = 0; - u8 *bp; - char flag = TTY_NORMAL; - - pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line); - - rxre = (struct mpsc_rx_desc *)(pi->rxr + (pi->rxr_posn*MPSC_RXRE_SIZE)); - - dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE, - DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)rxre, - (ulong)rxre + MPSC_RXRE_SIZE); -#endif - - /* - * Loop through Rx descriptors handling ones that have been completed. - */ - while (!((cmdstat = be32_to_cpu(rxre->cmdstat)) - & SDMA_DESC_CMDSTAT_O)) { - bytes_in = be16_to_cpu(rxre->bytecnt); -#ifdef CONFIG_CONSOLE_POLL - if (unlikely(serial_polled)) { - serial_polled = 0; - return 0; - } -#endif - /* Following use of tty struct directly is deprecated */ - if (unlikely(tty_buffer_request_room(tty, bytes_in) - < bytes_in)) { - if (tty->low_latency) - tty_flip_buffer_push(tty); - /* - * If this failed then we will throw away the bytes - * but must do so to clear interrupts. - */ - } - - bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE); - dma_cache_sync(pi->port.dev, (void *)bp, MPSC_RXBE_SIZE, - DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)bp, - (ulong)bp + MPSC_RXBE_SIZE); -#endif - - /* - * Other than for parity error, the manual provides little - * info on what data will be in a frame flagged by any of - * these errors. For parity error, it is the last byte in - * the buffer that had the error. As for the rest, I guess - * we'll assume there is no data in the buffer. - * If there is...it gets lost. - */ - if (unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR - | SDMA_DESC_CMDSTAT_FR - | SDMA_DESC_CMDSTAT_OR))) { - - pi->port.icount.rx++; - - if (cmdstat & SDMA_DESC_CMDSTAT_BR) { /* Break */ - pi->port.icount.brk++; - - if (uart_handle_break(&pi->port)) - goto next_frame; - } else if (cmdstat & SDMA_DESC_CMDSTAT_FR) { - pi->port.icount.frame++; - } else if (cmdstat & SDMA_DESC_CMDSTAT_OR) { - pi->port.icount.overrun++; - } - - cmdstat &= pi->port.read_status_mask; - - if (cmdstat & SDMA_DESC_CMDSTAT_BR) - flag = TTY_BREAK; - else if (cmdstat & SDMA_DESC_CMDSTAT_FR) - flag = TTY_FRAME; - else if (cmdstat & SDMA_DESC_CMDSTAT_OR) - flag = TTY_OVERRUN; - else if (cmdstat & SDMA_DESC_CMDSTAT_PE) - flag = TTY_PARITY; - } - - if (uart_handle_sysrq_char(&pi->port, *bp)) { - bp++; - bytes_in--; -#ifdef CONFIG_CONSOLE_POLL - if (unlikely(serial_polled)) { - serial_polled = 0; - return 0; - } -#endif - goto next_frame; - } - - if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR - | SDMA_DESC_CMDSTAT_FR - | SDMA_DESC_CMDSTAT_OR))) - && !(cmdstat & pi->port.ignore_status_mask)) { - tty_insert_flip_char(tty, *bp, flag); - } else { - for (i=0; iport.icount.rx += bytes_in; - } - -next_frame: - rxre->bytecnt = cpu_to_be16(0); - wmb(); - rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O - | SDMA_DESC_CMDSTAT_EI | SDMA_DESC_CMDSTAT_F - | SDMA_DESC_CMDSTAT_L); - wmb(); - dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE, - DMA_BIDIRECTIONAL); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - flush_dcache_range((ulong)rxre, - (ulong)rxre + MPSC_RXRE_SIZE); -#endif - - /* Advance to next descriptor */ - pi->rxr_posn = (pi->rxr_posn + 1) & (MPSC_RXR_ENTRIES - 1); - rxre = (struct mpsc_rx_desc *) - (pi->rxr + (pi->rxr_posn * MPSC_RXRE_SIZE)); - dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE, - DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)rxre, - (ulong)rxre + MPSC_RXRE_SIZE); -#endif - rc = 1; - } - - /* Restart rx engine, if its stopped */ - if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0) - mpsc_start_rx(pi); - - tty_flip_buffer_push(tty); - return rc; -} - -static void mpsc_setup_tx_desc(struct mpsc_port_info *pi, u32 count, u32 intr) -{ - struct mpsc_tx_desc *txre; - - txre = (struct mpsc_tx_desc *)(pi->txr - + (pi->txr_head * MPSC_TXRE_SIZE)); - - txre->bytecnt = cpu_to_be16(count); - txre->shadow = txre->bytecnt; - wmb(); /* ensure cmdstat is last field updated */ - txre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | SDMA_DESC_CMDSTAT_F - | SDMA_DESC_CMDSTAT_L - | ((intr) ? SDMA_DESC_CMDSTAT_EI : 0)); - wmb(); - dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE, - DMA_BIDIRECTIONAL); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - flush_dcache_range((ulong)txre, - (ulong)txre + MPSC_TXRE_SIZE); -#endif -} - -static void mpsc_copy_tx_data(struct mpsc_port_info *pi) -{ - struct circ_buf *xmit = &pi->port.state->xmit; - u8 *bp; - u32 i; - - /* Make sure the desc ring isn't full */ - while (CIRC_CNT(pi->txr_head, pi->txr_tail, MPSC_TXR_ENTRIES) - < (MPSC_TXR_ENTRIES - 1)) { - if (pi->port.x_char) { - /* - * Ideally, we should use the TCS field in - * CHR_1 to put the x_char out immediately but - * errata prevents us from being able to read - * CHR_2 to know that its safe to write to - * CHR_1. Instead, just put it in-band with - * all the other Tx data. - */ - bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); - *bp = pi->port.x_char; - pi->port.x_char = 0; - i = 1; - } else if (!uart_circ_empty(xmit) - && !uart_tx_stopped(&pi->port)) { - i = min((u32)MPSC_TXBE_SIZE, - (u32)uart_circ_chars_pending(xmit)); - i = min(i, (u32)CIRC_CNT_TO_END(xmit->head, xmit->tail, - UART_XMIT_SIZE)); - bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); - memcpy(bp, &xmit->buf[xmit->tail], i); - xmit->tail = (xmit->tail + i) & (UART_XMIT_SIZE - 1); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&pi->port); - } else { /* All tx data copied into ring bufs */ - return; - } - - dma_cache_sync(pi->port.dev, (void *)bp, MPSC_TXBE_SIZE, - DMA_BIDIRECTIONAL); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - flush_dcache_range((ulong)bp, - (ulong)bp + MPSC_TXBE_SIZE); -#endif - mpsc_setup_tx_desc(pi, i, 1); - - /* Advance to next descriptor */ - pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1); - } -} - -static int mpsc_tx_intr(struct mpsc_port_info *pi) -{ - struct mpsc_tx_desc *txre; - int rc = 0; - unsigned long iflags; - - spin_lock_irqsave(&pi->tx_lock, iflags); - - if (!mpsc_sdma_tx_active(pi)) { - txre = (struct mpsc_tx_desc *)(pi->txr - + (pi->txr_tail * MPSC_TXRE_SIZE)); - - dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE, - DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)txre, - (ulong)txre + MPSC_TXRE_SIZE); -#endif - - while (!(be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O)) { - rc = 1; - pi->port.icount.tx += be16_to_cpu(txre->bytecnt); - pi->txr_tail = (pi->txr_tail+1) & (MPSC_TXR_ENTRIES-1); - - /* If no more data to tx, fall out of loop */ - if (pi->txr_head == pi->txr_tail) - break; - - txre = (struct mpsc_tx_desc *)(pi->txr - + (pi->txr_tail * MPSC_TXRE_SIZE)); - dma_cache_sync(pi->port.dev, (void *)txre, - MPSC_TXRE_SIZE, DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)txre, - (ulong)txre + MPSC_TXRE_SIZE); -#endif - } - - mpsc_copy_tx_data(pi); - mpsc_sdma_start_tx(pi); /* start next desc if ready */ - } - - spin_unlock_irqrestore(&pi->tx_lock, iflags); - return rc; -} - -/* - * This is the driver's interrupt handler. To avoid a race, we first clear - * the interrupt, then handle any completed Rx/Tx descriptors. When done - * handling those descriptors, we restart the Rx/Tx engines if they're stopped. - */ -static irqreturn_t mpsc_sdma_intr(int irq, void *dev_id) -{ - struct mpsc_port_info *pi = dev_id; - ulong iflags; - int rc = IRQ_NONE; - - pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Received\n",pi->port.line); - - spin_lock_irqsave(&pi->port.lock, iflags); - mpsc_sdma_intr_ack(pi); - if (mpsc_rx_intr(pi)) - rc = IRQ_HANDLED; - if (mpsc_tx_intr(pi)) - rc = IRQ_HANDLED; - spin_unlock_irqrestore(&pi->port.lock, iflags); - - pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Handled\n", pi->port.line); - return rc; -} - -/* - ****************************************************************************** - * - * serial_core.c Interface routines - * - ****************************************************************************** - */ -static uint mpsc_tx_empty(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - ulong iflags; - uint rc; - - spin_lock_irqsave(&pi->port.lock, iflags); - rc = mpsc_sdma_tx_active(pi) ? 0 : TIOCSER_TEMT; - spin_unlock_irqrestore(&pi->port.lock, iflags); - - return rc; -} - -static void mpsc_set_mctrl(struct uart_port *port, uint mctrl) -{ - /* Have no way to set modem control lines AFAICT */ -} - -static uint mpsc_get_mctrl(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - u32 mflags, status; - - status = (pi->mirror_regs) ? pi->MPSC_CHR_10_m - : readl(pi->mpsc_base + MPSC_CHR_10); - - mflags = 0; - if (status & 0x1) - mflags |= TIOCM_CTS; - if (status & 0x2) - mflags |= TIOCM_CAR; - - return mflags | TIOCM_DSR; /* No way to tell if DSR asserted */ -} - -static void mpsc_stop_tx(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - - pr_debug("mpsc_stop_tx[%d]\n", port->line); - - mpsc_freeze(pi); -} - -static void mpsc_start_tx(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - unsigned long iflags; - - spin_lock_irqsave(&pi->tx_lock, iflags); - - mpsc_unfreeze(pi); - mpsc_copy_tx_data(pi); - mpsc_sdma_start_tx(pi); - - spin_unlock_irqrestore(&pi->tx_lock, iflags); - - pr_debug("mpsc_start_tx[%d]\n", port->line); -} - -static void mpsc_start_rx(struct mpsc_port_info *pi) -{ - pr_debug("mpsc_start_rx[%d]: Starting...\n", pi->port.line); - - if (pi->rcv_data) { - mpsc_enter_hunt(pi); - mpsc_sdma_cmd(pi, SDMA_SDCM_ERD); - } -} - -static void mpsc_stop_rx(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - - pr_debug("mpsc_stop_rx[%d]: Stopping...\n", port->line); - - if (pi->mirror_regs) { - writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_RA, - pi->mpsc_base + MPSC_CHR_2); - /* Erratum prevents reading CHR_2 so just delay for a while */ - udelay(100); - } else { - writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_RA, - pi->mpsc_base + MPSC_CHR_2); - - while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_RA) - udelay(10); - } - - mpsc_sdma_cmd(pi, SDMA_SDCM_AR); -} - -static void mpsc_enable_ms(struct uart_port *port) -{ -} - -static void mpsc_break_ctl(struct uart_port *port, int ctl) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - ulong flags; - u32 v; - - v = ctl ? 0x00ff0000 : 0; - - spin_lock_irqsave(&pi->port.lock, flags); - if (pi->mirror_regs) - pi->MPSC_CHR_1_m = v; - writel(v, pi->mpsc_base + MPSC_CHR_1); - spin_unlock_irqrestore(&pi->port.lock, flags); -} - -static int mpsc_startup(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - u32 flag = 0; - int rc; - - pr_debug("mpsc_startup[%d]: Starting up MPSC, irq: %d\n", - port->line, pi->port.irq); - - if ((rc = mpsc_make_ready(pi)) == 0) { - /* Setup IRQ handler */ - mpsc_sdma_intr_ack(pi); - - /* If irq's are shared, need to set flag */ - if (mpsc_ports[0].port.irq == mpsc_ports[1].port.irq) - flag = IRQF_SHARED; - - if (request_irq(pi->port.irq, mpsc_sdma_intr, flag, - "mpsc-sdma", pi)) - printk(KERN_ERR "MPSC: Can't get SDMA IRQ %d\n", - pi->port.irq); - - mpsc_sdma_intr_unmask(pi, 0xf); - mpsc_sdma_set_rx_ring(pi, (struct mpsc_rx_desc *)(pi->rxr_p - + (pi->rxr_posn * MPSC_RXRE_SIZE))); - } - - return rc; -} - -static void mpsc_shutdown(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - - pr_debug("mpsc_shutdown[%d]: Shutting down MPSC\n", port->line); - - mpsc_sdma_stop(pi); - free_irq(pi->port.irq, pi); -} - -static void mpsc_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - u32 baud; - ulong flags; - u32 chr_bits, stop_bits, par; - - pi->c_iflag = termios->c_iflag; - pi->c_cflag = termios->c_cflag; - - switch (termios->c_cflag & CSIZE) { - case CS5: - chr_bits = MPSC_MPCR_CL_5; - break; - case CS6: - chr_bits = MPSC_MPCR_CL_6; - break; - case CS7: - chr_bits = MPSC_MPCR_CL_7; - break; - case CS8: - default: - chr_bits = MPSC_MPCR_CL_8; - break; - } - - if (termios->c_cflag & CSTOPB) - stop_bits = MPSC_MPCR_SBL_2; - else - stop_bits = MPSC_MPCR_SBL_1; - - par = MPSC_CHR_2_PAR_EVEN; - if (termios->c_cflag & PARENB) - if (termios->c_cflag & PARODD) - par = MPSC_CHR_2_PAR_ODD; -#ifdef CMSPAR - if (termios->c_cflag & CMSPAR) { - if (termios->c_cflag & PARODD) - par = MPSC_CHR_2_PAR_MARK; - else - par = MPSC_CHR_2_PAR_SPACE; - } -#endif - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk); - - spin_lock_irqsave(&pi->port.lock, flags); - - uart_update_timeout(port, termios->c_cflag, baud); - - mpsc_set_char_length(pi, chr_bits); - mpsc_set_stop_bit_length(pi, stop_bits); - mpsc_set_parity(pi, par); - mpsc_set_baudrate(pi, baud); - - /* Characters/events to read */ - pi->port.read_status_mask = SDMA_DESC_CMDSTAT_OR; - - if (termios->c_iflag & INPCK) - pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_PE - | SDMA_DESC_CMDSTAT_FR; - - if (termios->c_iflag & (BRKINT | PARMRK)) - pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_BR; - - /* Characters/events to ignore */ - pi->port.ignore_status_mask = 0; - - if (termios->c_iflag & IGNPAR) - pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_PE - | SDMA_DESC_CMDSTAT_FR; - - if (termios->c_iflag & IGNBRK) { - pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_BR; - - if (termios->c_iflag & IGNPAR) - pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_OR; - } - - if ((termios->c_cflag & CREAD)) { - if (!pi->rcv_data) { - pi->rcv_data = 1; - mpsc_start_rx(pi); - } - } else if (pi->rcv_data) { - mpsc_stop_rx(port); - pi->rcv_data = 0; - } - - spin_unlock_irqrestore(&pi->port.lock, flags); -} - -static const char *mpsc_type(struct uart_port *port) -{ - pr_debug("mpsc_type[%d]: port type: %s\n", port->line,MPSC_DRIVER_NAME); - return MPSC_DRIVER_NAME; -} - -static int mpsc_request_port(struct uart_port *port) -{ - /* Should make chip/platform specific call */ - return 0; -} - -static void mpsc_release_port(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - - if (pi->ready) { - mpsc_uninit_rings(pi); - mpsc_free_ring_mem(pi); - pi->ready = 0; - } -} - -static void mpsc_config_port(struct uart_port *port, int flags) -{ -} - -static int mpsc_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - int rc = 0; - - pr_debug("mpsc_verify_port[%d]: Verifying port data\n", pi->port.line); - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPSC) - rc = -EINVAL; - else if (pi->port.irq != ser->irq) - rc = -EINVAL; - else if (ser->io_type != SERIAL_IO_MEM) - rc = -EINVAL; - else if (pi->port.uartclk / 16 != ser->baud_base) /* Not sure */ - rc = -EINVAL; - else if ((void *)pi->port.mapbase != ser->iomem_base) - rc = -EINVAL; - else if (pi->port.iobase != ser->port) - rc = -EINVAL; - else if (ser->hub6 != 0) - rc = -EINVAL; - - return rc; -} -#ifdef CONFIG_CONSOLE_POLL -/* Serial polling routines for writing and reading from the uart while - * in an interrupt or debug context. - */ - -static char poll_buf[2048]; -static int poll_ptr; -static int poll_cnt; -static void mpsc_put_poll_char(struct uart_port *port, - unsigned char c); - -static int mpsc_get_poll_char(struct uart_port *port) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - struct mpsc_rx_desc *rxre; - u32 cmdstat, bytes_in, i; - u8 *bp; - - if (!serial_polled) - serial_polled = 1; - - pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line); - - if (poll_cnt) { - poll_cnt--; - return poll_buf[poll_ptr++]; - } - poll_ptr = 0; - poll_cnt = 0; - - while (poll_cnt == 0) { - rxre = (struct mpsc_rx_desc *)(pi->rxr + - (pi->rxr_posn*MPSC_RXRE_SIZE)); - dma_cache_sync(pi->port.dev, (void *)rxre, - MPSC_RXRE_SIZE, DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)rxre, - (ulong)rxre + MPSC_RXRE_SIZE); -#endif - /* - * Loop through Rx descriptors handling ones that have - * been completed. - */ - while (poll_cnt == 0 && - !((cmdstat = be32_to_cpu(rxre->cmdstat)) & - SDMA_DESC_CMDSTAT_O)){ - bytes_in = be16_to_cpu(rxre->bytecnt); - bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE); - dma_cache_sync(pi->port.dev, (void *) bp, - MPSC_RXBE_SIZE, DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)bp, - (ulong)bp + MPSC_RXBE_SIZE); -#endif - if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR | - SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) && - !(cmdstat & pi->port.ignore_status_mask)) { - poll_buf[poll_cnt] = *bp; - poll_cnt++; - } else { - for (i = 0; i < bytes_in; i++) { - poll_buf[poll_cnt] = *bp++; - poll_cnt++; - } - pi->port.icount.rx += bytes_in; - } - rxre->bytecnt = cpu_to_be16(0); - wmb(); - rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | - SDMA_DESC_CMDSTAT_EI | - SDMA_DESC_CMDSTAT_F | - SDMA_DESC_CMDSTAT_L); - wmb(); - dma_cache_sync(pi->port.dev, (void *)rxre, - MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - flush_dcache_range((ulong)rxre, - (ulong)rxre + MPSC_RXRE_SIZE); -#endif - - /* Advance to next descriptor */ - pi->rxr_posn = (pi->rxr_posn + 1) & - (MPSC_RXR_ENTRIES - 1); - rxre = (struct mpsc_rx_desc *)(pi->rxr + - (pi->rxr_posn * MPSC_RXRE_SIZE)); - dma_cache_sync(pi->port.dev, (void *)rxre, - MPSC_RXRE_SIZE, DMA_FROM_DEVICE); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - invalidate_dcache_range((ulong)rxre, - (ulong)rxre + MPSC_RXRE_SIZE); -#endif - } - - /* Restart rx engine, if its stopped */ - if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0) - mpsc_start_rx(pi); - } - if (poll_cnt) { - poll_cnt--; - return poll_buf[poll_ptr++]; - } - - return 0; -} - - -static void mpsc_put_poll_char(struct uart_port *port, - unsigned char c) -{ - struct mpsc_port_info *pi = (struct mpsc_port_info *)port; - u32 data; - - data = readl(pi->mpsc_base + MPSC_MPCR); - writeb(c, pi->mpsc_base + MPSC_CHR_1); - mb(); - data = readl(pi->mpsc_base + MPSC_CHR_2); - data |= MPSC_CHR_2_TTCS; - writel(data, pi->mpsc_base + MPSC_CHR_2); - mb(); - - while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_TTCS); -} -#endif - -static struct uart_ops mpsc_pops = { - .tx_empty = mpsc_tx_empty, - .set_mctrl = mpsc_set_mctrl, - .get_mctrl = mpsc_get_mctrl, - .stop_tx = mpsc_stop_tx, - .start_tx = mpsc_start_tx, - .stop_rx = mpsc_stop_rx, - .enable_ms = mpsc_enable_ms, - .break_ctl = mpsc_break_ctl, - .startup = mpsc_startup, - .shutdown = mpsc_shutdown, - .set_termios = mpsc_set_termios, - .type = mpsc_type, - .release_port = mpsc_release_port, - .request_port = mpsc_request_port, - .config_port = mpsc_config_port, - .verify_port = mpsc_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = mpsc_get_poll_char, - .poll_put_char = mpsc_put_poll_char, -#endif -}; - -/* - ****************************************************************************** - * - * Console Interface Routines - * - ****************************************************************************** - */ - -#ifdef CONFIG_SERIAL_MPSC_CONSOLE -static void mpsc_console_write(struct console *co, const char *s, uint count) -{ - struct mpsc_port_info *pi = &mpsc_ports[co->index]; - u8 *bp, *dp, add_cr = 0; - int i; - unsigned long iflags; - - spin_lock_irqsave(&pi->tx_lock, iflags); - - while (pi->txr_head != pi->txr_tail) { - while (mpsc_sdma_tx_active(pi)) - udelay(100); - mpsc_sdma_intr_ack(pi); - mpsc_tx_intr(pi); - } - - while (mpsc_sdma_tx_active(pi)) - udelay(100); - - while (count > 0) { - bp = dp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); - - for (i = 0; i < MPSC_TXBE_SIZE; i++) { - if (count == 0) - break; - - if (add_cr) { - *(dp++) = '\r'; - add_cr = 0; - } else { - *(dp++) = *s; - - if (*(s++) == '\n') { /* add '\r' after '\n' */ - add_cr = 1; - count++; - } - } - - count--; - } - - dma_cache_sync(pi->port.dev, (void *)bp, MPSC_TXBE_SIZE, - DMA_BIDIRECTIONAL); -#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) - if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ - flush_dcache_range((ulong)bp, - (ulong)bp + MPSC_TXBE_SIZE); -#endif - mpsc_setup_tx_desc(pi, i, 0); - pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1); - mpsc_sdma_start_tx(pi); - - while (mpsc_sdma_tx_active(pi)) - udelay(100); - - pi->txr_tail = (pi->txr_tail + 1) & (MPSC_TXR_ENTRIES - 1); - } - - spin_unlock_irqrestore(&pi->tx_lock, iflags); -} - -static int __init mpsc_console_setup(struct console *co, char *options) -{ - struct mpsc_port_info *pi; - int baud, bits, parity, flow; - - pr_debug("mpsc_console_setup[%d]: options: %s\n", co->index, options); - - if (co->index >= MPSC_NUM_CTLRS) - co->index = 0; - - pi = &mpsc_ports[co->index]; - - baud = pi->default_baud; - bits = pi->default_bits; - parity = pi->default_parity; - flow = pi->default_flow; - - if (!pi->port.ops) - return -ENODEV; - - spin_lock_init(&pi->port.lock); /* Temporary fix--copied from 8250.c */ - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&pi->port, co, baud, parity, bits, flow); -} - -static struct console mpsc_console = { - .name = MPSC_DEV_NAME, - .write = mpsc_console_write, - .device = uart_console_device, - .setup = mpsc_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &mpsc_reg, -}; - -static int __init mpsc_late_console_init(void) -{ - pr_debug("mpsc_late_console_init: Enter\n"); - - if (!(mpsc_console.flags & CON_ENABLED)) - register_console(&mpsc_console); - return 0; -} - -late_initcall(mpsc_late_console_init); - -#define MPSC_CONSOLE &mpsc_console -#else -#define MPSC_CONSOLE NULL -#endif -/* - ****************************************************************************** - * - * Dummy Platform Driver to extract & map shared register regions - * - ****************************************************************************** - */ -static void mpsc_resource_err(char *s) -{ - printk(KERN_WARNING "MPSC: Platform device resource error in %s\n", s); -} - -static int mpsc_shared_map_regs(struct platform_device *pd) -{ - struct resource *r; - - if ((r = platform_get_resource(pd, IORESOURCE_MEM, - MPSC_ROUTING_BASE_ORDER)) - && request_mem_region(r->start, - MPSC_ROUTING_REG_BLOCK_SIZE, - "mpsc_routing_regs")) { - mpsc_shared_regs.mpsc_routing_base = ioremap(r->start, - MPSC_ROUTING_REG_BLOCK_SIZE); - mpsc_shared_regs.mpsc_routing_base_p = r->start; - } else { - mpsc_resource_err("MPSC routing base"); - return -ENOMEM; - } - - if ((r = platform_get_resource(pd, IORESOURCE_MEM, - MPSC_SDMA_INTR_BASE_ORDER)) - && request_mem_region(r->start, - MPSC_SDMA_INTR_REG_BLOCK_SIZE, - "sdma_intr_regs")) { - mpsc_shared_regs.sdma_intr_base = ioremap(r->start, - MPSC_SDMA_INTR_REG_BLOCK_SIZE); - mpsc_shared_regs.sdma_intr_base_p = r->start; - } else { - iounmap(mpsc_shared_regs.mpsc_routing_base); - release_mem_region(mpsc_shared_regs.mpsc_routing_base_p, - MPSC_ROUTING_REG_BLOCK_SIZE); - mpsc_resource_err("SDMA intr base"); - return -ENOMEM; - } - - return 0; -} - -static void mpsc_shared_unmap_regs(void) -{ - if (!mpsc_shared_regs.mpsc_routing_base) { - iounmap(mpsc_shared_regs.mpsc_routing_base); - release_mem_region(mpsc_shared_regs.mpsc_routing_base_p, - MPSC_ROUTING_REG_BLOCK_SIZE); - } - if (!mpsc_shared_regs.sdma_intr_base) { - iounmap(mpsc_shared_regs.sdma_intr_base); - release_mem_region(mpsc_shared_regs.sdma_intr_base_p, - MPSC_SDMA_INTR_REG_BLOCK_SIZE); - } - - mpsc_shared_regs.mpsc_routing_base = NULL; - mpsc_shared_regs.sdma_intr_base = NULL; - - mpsc_shared_regs.mpsc_routing_base_p = 0; - mpsc_shared_regs.sdma_intr_base_p = 0; -} - -static int mpsc_shared_drv_probe(struct platform_device *dev) -{ - struct mpsc_shared_pdata *pdata; - int rc = -ENODEV; - - if (dev->id == 0) { - if (!(rc = mpsc_shared_map_regs(dev))) { - pdata = (struct mpsc_shared_pdata *) - dev->dev.platform_data; - - mpsc_shared_regs.MPSC_MRR_m = pdata->mrr_val; - mpsc_shared_regs.MPSC_RCRR_m= pdata->rcrr_val; - mpsc_shared_regs.MPSC_TCRR_m= pdata->tcrr_val; - mpsc_shared_regs.SDMA_INTR_CAUSE_m = - pdata->intr_cause_val; - mpsc_shared_regs.SDMA_INTR_MASK_m = - pdata->intr_mask_val; - - rc = 0; - } - } - - return rc; -} - -static int mpsc_shared_drv_remove(struct platform_device *dev) -{ - int rc = -ENODEV; - - if (dev->id == 0) { - mpsc_shared_unmap_regs(); - mpsc_shared_regs.MPSC_MRR_m = 0; - mpsc_shared_regs.MPSC_RCRR_m = 0; - mpsc_shared_regs.MPSC_TCRR_m = 0; - mpsc_shared_regs.SDMA_INTR_CAUSE_m = 0; - mpsc_shared_regs.SDMA_INTR_MASK_m = 0; - rc = 0; - } - - return rc; -} - -static struct platform_driver mpsc_shared_driver = { - .probe = mpsc_shared_drv_probe, - .remove = mpsc_shared_drv_remove, - .driver = { - .name = MPSC_SHARED_NAME, - }, -}; - -/* - ****************************************************************************** - * - * Driver Interface Routines - * - ****************************************************************************** - */ -static struct uart_driver mpsc_reg = { - .owner = THIS_MODULE, - .driver_name = MPSC_DRIVER_NAME, - .dev_name = MPSC_DEV_NAME, - .major = MPSC_MAJOR, - .minor = MPSC_MINOR_START, - .nr = MPSC_NUM_CTLRS, - .cons = MPSC_CONSOLE, -}; - -static int mpsc_drv_map_regs(struct mpsc_port_info *pi, - struct platform_device *pd) -{ - struct resource *r; - - if ((r = platform_get_resource(pd, IORESOURCE_MEM, MPSC_BASE_ORDER)) - && request_mem_region(r->start, MPSC_REG_BLOCK_SIZE, - "mpsc_regs")) { - pi->mpsc_base = ioremap(r->start, MPSC_REG_BLOCK_SIZE); - pi->mpsc_base_p = r->start; - } else { - mpsc_resource_err("MPSC base"); - goto err; - } - - if ((r = platform_get_resource(pd, IORESOURCE_MEM, - MPSC_SDMA_BASE_ORDER)) - && request_mem_region(r->start, - MPSC_SDMA_REG_BLOCK_SIZE, "sdma_regs")) { - pi->sdma_base = ioremap(r->start,MPSC_SDMA_REG_BLOCK_SIZE); - pi->sdma_base_p = r->start; - } else { - mpsc_resource_err("SDMA base"); - if (pi->mpsc_base) { - iounmap(pi->mpsc_base); - pi->mpsc_base = NULL; - } - goto err; - } - - if ((r = platform_get_resource(pd,IORESOURCE_MEM,MPSC_BRG_BASE_ORDER)) - && request_mem_region(r->start, - MPSC_BRG_REG_BLOCK_SIZE, "brg_regs")) { - pi->brg_base = ioremap(r->start, MPSC_BRG_REG_BLOCK_SIZE); - pi->brg_base_p = r->start; - } else { - mpsc_resource_err("BRG base"); - if (pi->mpsc_base) { - iounmap(pi->mpsc_base); - pi->mpsc_base = NULL; - } - if (pi->sdma_base) { - iounmap(pi->sdma_base); - pi->sdma_base = NULL; - } - goto err; - } - return 0; - -err: - return -ENOMEM; -} - -static void mpsc_drv_unmap_regs(struct mpsc_port_info *pi) -{ - if (!pi->mpsc_base) { - iounmap(pi->mpsc_base); - release_mem_region(pi->mpsc_base_p, MPSC_REG_BLOCK_SIZE); - } - if (!pi->sdma_base) { - iounmap(pi->sdma_base); - release_mem_region(pi->sdma_base_p, MPSC_SDMA_REG_BLOCK_SIZE); - } - if (!pi->brg_base) { - iounmap(pi->brg_base); - release_mem_region(pi->brg_base_p, MPSC_BRG_REG_BLOCK_SIZE); - } - - pi->mpsc_base = NULL; - pi->sdma_base = NULL; - pi->brg_base = NULL; - - pi->mpsc_base_p = 0; - pi->sdma_base_p = 0; - pi->brg_base_p = 0; -} - -static void mpsc_drv_get_platform_data(struct mpsc_port_info *pi, - struct platform_device *pd, int num) -{ - struct mpsc_pdata *pdata; - - pdata = (struct mpsc_pdata *)pd->dev.platform_data; - - pi->port.uartclk = pdata->brg_clk_freq; - pi->port.iotype = UPIO_MEM; - pi->port.line = num; - pi->port.type = PORT_MPSC; - pi->port.fifosize = MPSC_TXBE_SIZE; - pi->port.membase = pi->mpsc_base; - pi->port.mapbase = (ulong)pi->mpsc_base; - pi->port.ops = &mpsc_pops; - - pi->mirror_regs = pdata->mirror_regs; - pi->cache_mgmt = pdata->cache_mgmt; - pi->brg_can_tune = pdata->brg_can_tune; - pi->brg_clk_src = pdata->brg_clk_src; - pi->mpsc_max_idle = pdata->max_idle; - pi->default_baud = pdata->default_baud; - pi->default_bits = pdata->default_bits; - pi->default_parity = pdata->default_parity; - pi->default_flow = pdata->default_flow; - - /* Initial values of mirrored regs */ - pi->MPSC_CHR_1_m = pdata->chr_1_val; - pi->MPSC_CHR_2_m = pdata->chr_2_val; - pi->MPSC_CHR_10_m = pdata->chr_10_val; - pi->MPSC_MPCR_m = pdata->mpcr_val; - pi->BRG_BCR_m = pdata->bcr_val; - - pi->shared_regs = &mpsc_shared_regs; - - pi->port.irq = platform_get_irq(pd, 0); -} - -static int mpsc_drv_probe(struct platform_device *dev) -{ - struct mpsc_port_info *pi; - int rc = -ENODEV; - - pr_debug("mpsc_drv_probe: Adding MPSC %d\n", dev->id); - - if (dev->id < MPSC_NUM_CTLRS) { - pi = &mpsc_ports[dev->id]; - - if (!(rc = mpsc_drv_map_regs(pi, dev))) { - mpsc_drv_get_platform_data(pi, dev, dev->id); - pi->port.dev = &dev->dev; - - if (!(rc = mpsc_make_ready(pi))) { - spin_lock_init(&pi->tx_lock); - if (!(rc = uart_add_one_port(&mpsc_reg, - &pi->port))) { - rc = 0; - } else { - mpsc_release_port((struct uart_port *) - pi); - mpsc_drv_unmap_regs(pi); - } - } else { - mpsc_drv_unmap_regs(pi); - } - } - } - - return rc; -} - -static int mpsc_drv_remove(struct platform_device *dev) -{ - pr_debug("mpsc_drv_exit: Removing MPSC %d\n", dev->id); - - if (dev->id < MPSC_NUM_CTLRS) { - uart_remove_one_port(&mpsc_reg, &mpsc_ports[dev->id].port); - mpsc_release_port((struct uart_port *) - &mpsc_ports[dev->id].port); - mpsc_drv_unmap_regs(&mpsc_ports[dev->id]); - return 0; - } else { - return -ENODEV; - } -} - -static struct platform_driver mpsc_driver = { - .probe = mpsc_drv_probe, - .remove = mpsc_drv_remove, - .driver = { - .name = MPSC_CTLR_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init mpsc_drv_init(void) -{ - int rc; - - printk(KERN_INFO "Serial: MPSC driver\n"); - - memset(mpsc_ports, 0, sizeof(mpsc_ports)); - memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs)); - - if (!(rc = uart_register_driver(&mpsc_reg))) { - if (!(rc = platform_driver_register(&mpsc_shared_driver))) { - if ((rc = platform_driver_register(&mpsc_driver))) { - platform_driver_unregister(&mpsc_shared_driver); - uart_unregister_driver(&mpsc_reg); - } - } else { - uart_unregister_driver(&mpsc_reg); - } - } - - return rc; -} - -static void __exit mpsc_drv_exit(void) -{ - platform_driver_unregister(&mpsc_driver); - platform_driver_unregister(&mpsc_shared_driver); - uart_unregister_driver(&mpsc_reg); - memset(mpsc_ports, 0, sizeof(mpsc_ports)); - memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs)); -} - -module_init(mpsc_drv_init); -module_exit(mpsc_drv_exit); - -MODULE_AUTHOR("Mark A. Greer "); -MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver"); -MODULE_VERSION(MPSC_VERSION); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR); -MODULE_ALIAS("platform:" MPSC_CTLR_NAME); diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c deleted file mode 100644 index b62857bf2fdb..000000000000 --- a/drivers/serial/mrst_max3110.c +++ /dev/null @@ -1,919 +0,0 @@ -/* - * mrst_max3110.c - spi uart protocol driver for Maxim 3110 - * - * Copyright (c) 2008-2010, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - */ - -/* - * Note: - * 1. From Max3110 spec, the Rx FIFO has 8 words, while the Tx FIFO only has - * 1 word. If SPI master controller doesn't support sclk frequency change, - * then the char need be sent out one by one with some delay - * - * 2. Currently only RX availabe interrrupt is used, no need for waiting TXE - * interrupt for a low speed UART device - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "mrst_max3110.h" - -#define PR_FMT "mrst_max3110: " - -#define UART_TX_NEEDED 1 -#define CON_TX_NEEDED 2 -#define BIT_IRQ_PENDING 3 - -struct uart_max3110 { - struct uart_port port; - struct spi_device *spi; - char name[24]; - - wait_queue_head_t wq; - struct task_struct *main_thread; - struct task_struct *read_thread; - struct mutex thread_mutex;; - - u32 baud; - u16 cur_conf; - u8 clock; - u8 parity, word_7bits; - u16 irq; - - unsigned long uart_flags; - - /* console related */ - struct circ_buf con_xmit; -}; - -/* global data structure, may need be removed */ -static struct uart_max3110 *pmax; - -static void receive_chars(struct uart_max3110 *max, - unsigned char *str, int len); -static int max3110_read_multi(struct uart_max3110 *max, u8 *buf); -static void max3110_con_receive(struct uart_max3110 *max); - -static int max3110_write_then_read(struct uart_max3110 *max, - const void *txbuf, void *rxbuf, unsigned len, int always_fast) -{ - struct spi_device *spi = max->spi; - struct spi_message message; - struct spi_transfer x; - int ret; - - spi_message_init(&message); - memset(&x, 0, sizeof x); - x.len = len; - x.tx_buf = txbuf; - x.rx_buf = rxbuf; - spi_message_add_tail(&x, &message); - - if (always_fast) - x.speed_hz = spi->max_speed_hz; - else if (max->baud) - x.speed_hz = max->baud; - - /* Do the i/o */ - ret = spi_sync(spi, &message); - return ret; -} - -/* Write a 16b word to the device */ -static int max3110_out(struct uart_max3110 *max, const u16 out) -{ - void *buf; - u16 *obuf, *ibuf; - u8 ch; - int ret; - - buf = kzalloc(8, GFP_KERNEL | GFP_DMA); - if (!buf) - return -ENOMEM; - - obuf = buf; - ibuf = buf + 4; - *obuf = out; - ret = max3110_write_then_read(max, obuf, ibuf, 2, 1); - if (ret) { - pr_warning(PR_FMT "%s(): get err msg %d when sending 0x%x\n", - __func__, ret, out); - goto exit; - } - - /* If some valid data is read back */ - if (*ibuf & MAX3110_READ_DATA_AVAILABLE) { - ch = *ibuf & 0xff; - receive_chars(max, &ch, 1); - } - -exit: - kfree(buf); - return ret; -} - -/* - * This is usually used to read data from SPIC RX FIFO, which doesn't - * need any delay like flushing character out. - * - * Return how many valide bytes are read back - */ -static int max3110_read_multi(struct uart_max3110 *max, u8 *rxbuf) -{ - void *buf; - u16 *obuf, *ibuf; - u8 *pbuf, valid_str[M3110_RX_FIFO_DEPTH]; - int i, j, blen; - - blen = M3110_RX_FIFO_DEPTH * sizeof(u16); - buf = kzalloc(blen * 2, GFP_KERNEL | GFP_DMA); - if (!buf) { - pr_warning(PR_FMT "%s(): fail to alloc dma buffer\n", __func__); - return 0; - } - - /* tx/rx always have the same length */ - obuf = buf; - ibuf = buf + blen; - - if (max3110_write_then_read(max, obuf, ibuf, blen, 1)) { - kfree(buf); - return 0; - } - - /* If caller doesn't provide a buffer, then handle received char */ - pbuf = rxbuf ? rxbuf : valid_str; - - for (i = 0, j = 0; i < M3110_RX_FIFO_DEPTH; i++) { - if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE) - pbuf[j++] = ibuf[i] & 0xff; - } - - if (j && (pbuf == valid_str)) - receive_chars(max, valid_str, j); - - kfree(buf); - return j; -} - -static void serial_m3110_con_putchar(struct uart_port *port, int ch) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - struct circ_buf *xmit = &max->con_xmit; - - if (uart_circ_chars_free(xmit)) { - xmit->buf[xmit->head] = (char)ch; - xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1); - } -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void serial_m3110_con_write(struct console *co, - const char *s, unsigned int count) -{ - if (!pmax) - return; - - uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar); - - if (!test_and_set_bit(CON_TX_NEEDED, &pmax->uart_flags)) - wake_up_process(pmax->main_thread); -} - -static int __init -serial_m3110_con_setup(struct console *co, char *options) -{ - struct uart_max3110 *max = pmax; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - pr_info(PR_FMT "setting up console\n"); - - if (co->index == -1) - co->index = 0; - - if (!max) { - pr_err(PR_FMT "pmax is NULL, return"); - return -ENODEV; - } - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&max->port, co, baud, parity, bits, flow); -} - -static struct tty_driver *serial_m3110_con_device(struct console *co, - int *index) -{ - struct uart_driver *p = co->data; - *index = co->index; - return p->tty_driver; -} - -static struct uart_driver serial_m3110_reg; -static struct console serial_m3110_console = { - .name = "ttyS", - .write = serial_m3110_con_write, - .device = serial_m3110_con_device, - .setup = serial_m3110_con_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &serial_m3110_reg, -}; - -static unsigned int serial_m3110_tx_empty(struct uart_port *port) -{ - return 1; -} - -static void serial_m3110_stop_tx(struct uart_port *port) -{ - return; -} - -/* stop_rx will be called in spin_lock env */ -static void serial_m3110_stop_rx(struct uart_port *port) -{ - return; -} - -#define WORDS_PER_XFER 128 -static void send_circ_buf(struct uart_max3110 *max, - struct circ_buf *xmit) -{ - void *buf; - u16 *obuf, *ibuf; - u8 valid_str[WORDS_PER_XFER]; - int i, j, len, blen, dma_size, left, ret = 0; - - - dma_size = WORDS_PER_XFER * sizeof(u16) * 2; - buf = kzalloc(dma_size, GFP_KERNEL | GFP_DMA); - if (!buf) - return; - obuf = buf; - ibuf = buf + dma_size/2; - - while (!uart_circ_empty(xmit)) { - left = uart_circ_chars_pending(xmit); - while (left) { - len = min(left, WORDS_PER_XFER); - blen = len * sizeof(u16); - memset(ibuf, 0, blen); - - for (i = 0; i < len; i++) { - obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG; - xmit->tail = (xmit->tail + 1) & - (UART_XMIT_SIZE - 1); - } - - /* Fail to send msg to console is not very critical */ - ret = max3110_write_then_read(max, obuf, ibuf, blen, 0); - if (ret) - pr_warning(PR_FMT "%s(): get err msg %d\n", - __func__, ret); - - for (i = 0, j = 0; i < len; i++) { - if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE) - valid_str[j++] = ibuf[i] & 0xff; - } - - if (j) - receive_chars(max, valid_str, j); - - max->port.icount.tx += len; - left -= len; - } - } - - kfree(buf); -} - -static void transmit_char(struct uart_max3110 *max) -{ - struct uart_port *port = &max->port; - struct circ_buf *xmit = &port->state->xmit; - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) - return; - - send_circ_buf(max, xmit); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - serial_m3110_stop_tx(port); -} - -/* - * This will be called by uart_write() and tty_write, can't - * go to sleep - */ -static void serial_m3110_start_tx(struct uart_port *port) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - - if (!test_and_set_bit(UART_TX_NEEDED, &max->uart_flags)) - wake_up_process(max->main_thread); -} - -static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len) -{ - struct uart_port *port = &max->port; - struct tty_struct *tty; - int usable; - - /* If uart is not opened, just return */ - if (!port->state) - return; - - tty = port->state->port.tty; - if (!tty) - return; - - while (len) { - usable = tty_buffer_request_room(tty, len); - if (usable) { - tty_insert_flip_string(tty, str, usable); - str += usable; - port->icount.rx += usable; - } - len -= usable; - } - tty_flip_buffer_push(tty); -} - -/* - * This routine will be used in read_thread or RX IRQ handling, - * it will first do one round buffer read(8 words), if there is some - * valid RX data, will try to read 5 more rounds till all data - * is read out. - * - * Use stack space as data buffer to save some system load, and chose - * 504 Btyes as a threadhold to do a bulk push to upper tty layer when - * receiving bulk data, a much bigger buffer may cause stack overflow - */ -static void max3110_con_receive(struct uart_max3110 *max) -{ - int loop = 1, num, total = 0; - u8 recv_buf[512], *pbuf; - - pbuf = recv_buf; - do { - num = max3110_read_multi(max, pbuf); - - if (num) { - loop = 5; - pbuf += num; - total += num; - - if (total >= 504) { - receive_chars(max, recv_buf, total); - pbuf = recv_buf; - total = 0; - } - } - } while (--loop); - - if (total) - receive_chars(max, recv_buf, total); -} - -static int max3110_main_thread(void *_max) -{ - struct uart_max3110 *max = _max; - wait_queue_head_t *wq = &max->wq; - int ret = 0; - struct circ_buf *xmit = &max->con_xmit; - - init_waitqueue_head(wq); - pr_info(PR_FMT "start main thread\n"); - - do { - wait_event_interruptible(*wq, max->uart_flags || kthread_should_stop()); - - mutex_lock(&max->thread_mutex); - - if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags)) - max3110_con_receive(max); - - /* first handle console output */ - if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags)) - send_circ_buf(max, xmit); - - /* handle uart output */ - if (test_and_clear_bit(UART_TX_NEEDED, &max->uart_flags)) - transmit_char(max); - - mutex_unlock(&max->thread_mutex); - - } while (!kthread_should_stop()); - - return ret; -} - -static irqreturn_t serial_m3110_irq(int irq, void *dev_id) -{ - struct uart_max3110 *max = dev_id; - - /* max3110's irq is a falling edge, not level triggered, - * so no need to disable the irq */ - if (!test_and_set_bit(BIT_IRQ_PENDING, &max->uart_flags)) - wake_up_process(max->main_thread); - - return IRQ_HANDLED; -} - -/* if don't use RX IRQ, then need a thread to polling read */ -static int max3110_read_thread(void *_max) -{ - struct uart_max3110 *max = _max; - - pr_info(PR_FMT "start read thread\n"); - do { - /* - * If can't acquire the mutex, it means the main thread - * is running which will also perform the rx job - */ - if (mutex_trylock(&max->thread_mutex)) { - max3110_con_receive(max); - mutex_unlock(&max->thread_mutex); - } - - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(HZ / 20); - } while (!kthread_should_stop()); - - return 0; -} - -static int serial_m3110_startup(struct uart_port *port) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - u16 config = 0; - int ret = 0; - - if (port->line != 0) { - pr_err(PR_FMT "uart port startup failed\n"); - return -1; - } - - /* Disable all IRQ and config it to 115200, 8n1 */ - config = WC_TAG | WC_FIFO_ENABLE - | WC_1_STOPBITS - | WC_8BIT_WORD - | WC_BAUD_DR2; - - /* as we use thread to handle tx/rx, need set low latency */ - port->state->port.tty->low_latency = 1; - - if (max->irq) { - max->read_thread = NULL; - ret = request_irq(max->irq, serial_m3110_irq, - IRQ_TYPE_EDGE_FALLING, "max3110", max); - if (ret) { - max->irq = 0; - pr_err(PR_FMT "unable to allocate IRQ, polling\n"); - } else { - /* Enable RX IRQ only */ - config |= WC_RXA_IRQ_ENABLE; - } - } - - if (max->irq == 0) { - /* If IRQ is disabled, start a read thread for input data */ - max->read_thread = - kthread_run(max3110_read_thread, max, "max3110_read"); - if (IS_ERR(max->read_thread)) { - ret = PTR_ERR(max->read_thread); - max->read_thread = NULL; - pr_err(PR_FMT "Can't create read thread!\n"); - return ret; - } - } - - ret = max3110_out(max, config); - if (ret) { - if (max->irq) - free_irq(max->irq, max); - if (max->read_thread) - kthread_stop(max->read_thread); - max->read_thread = NULL; - return ret; - } - - max->cur_conf = config; - return 0; -} - -static void serial_m3110_shutdown(struct uart_port *port) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - u16 config; - - if (max->read_thread) { - kthread_stop(max->read_thread); - max->read_thread = NULL; - } - - if (max->irq) - free_irq(max->irq, max); - - /* Disable interrupts from this port */ - config = WC_TAG | WC_SW_SHDI; - max3110_out(max, config); -} - -static void serial_m3110_release_port(struct uart_port *port) -{ -} - -static int serial_m3110_request_port(struct uart_port *port) -{ - return 0; -} - -static void serial_m3110_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_MAX3100; -} - -static int -serial_m3110_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - /* we don't want the core code to modify any port params */ - return -EINVAL; -} - - -static const char *serial_m3110_type(struct uart_port *port) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - return max->name; -} - -static void -serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_max3110 *max = - container_of(port, struct uart_max3110, port); - unsigned char cval; - unsigned int baud, parity = 0; - int clk_div = -1; - u16 new_conf = max->cur_conf; - - switch (termios->c_cflag & CSIZE) { - case CS7: - cval = UART_LCR_WLEN7; - new_conf |= WC_7BIT_WORD; - break; - default: - /* We only support CS7 & CS8 */ - termios->c_cflag &= ~CSIZE; - termios->c_cflag |= CS8; - case CS8: - cval = UART_LCR_WLEN8; - new_conf |= WC_8BIT_WORD; - break; - } - - baud = uart_get_baud_rate(port, termios, old, 0, 230400); - - /* First calc the div for 1.8MHZ clock case */ - switch (baud) { - case 300: - clk_div = WC_BAUD_DR384; - break; - case 600: - clk_div = WC_BAUD_DR192; - break; - case 1200: - clk_div = WC_BAUD_DR96; - break; - case 2400: - clk_div = WC_BAUD_DR48; - break; - case 4800: - clk_div = WC_BAUD_DR24; - break; - case 9600: - clk_div = WC_BAUD_DR12; - break; - case 19200: - clk_div = WC_BAUD_DR6; - break; - case 38400: - clk_div = WC_BAUD_DR3; - break; - case 57600: - clk_div = WC_BAUD_DR2; - break; - case 115200: - clk_div = WC_BAUD_DR1; - break; - case 230400: - if (max->clock & MAX3110_HIGH_CLK) - break; - default: - /* Pick the previous baud rate */ - baud = max->baud; - clk_div = max->cur_conf & WC_BAUD_DIV_MASK; - tty_termios_encode_baud_rate(termios, baud, baud); - } - - if (max->clock & MAX3110_HIGH_CLK) { - clk_div += 1; - /* High clk version max3110 doesn't support B300 */ - if (baud == 300) { - baud = 600; - clk_div = WC_BAUD_DR384; - } - if (baud == 230400) - clk_div = WC_BAUD_DR1; - tty_termios_encode_baud_rate(termios, baud, baud); - } - - new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div; - - if (unlikely(termios->c_cflag & CMSPAR)) - termios->c_cflag &= ~CMSPAR; - - if (termios->c_cflag & CSTOPB) - new_conf |= WC_2_STOPBITS; - else - new_conf &= ~WC_2_STOPBITS; - - if (termios->c_cflag & PARENB) { - new_conf |= WC_PARITY_ENABLE; - parity |= UART_LCR_PARITY; - } else - new_conf &= ~WC_PARITY_ENABLE; - - if (!(termios->c_cflag & PARODD)) - parity |= UART_LCR_EPAR; - max->parity = parity; - - uart_update_timeout(port, termios->c_cflag, baud); - - new_conf |= WC_TAG; - if (new_conf != max->cur_conf) { - if (!max3110_out(max, new_conf)) { - max->cur_conf = new_conf; - max->baud = baud; - } - } -} - -/* Don't handle hw handshaking */ -static unsigned int serial_m3110_get_mctrl(struct uart_port *port) -{ - return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR; -} - -static void serial_m3110_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -static void serial_m3110_break_ctl(struct uart_port *port, int break_state) -{ -} - -static void serial_m3110_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ -} - -static void serial_m3110_enable_ms(struct uart_port *port) -{ -} - -struct uart_ops serial_m3110_ops = { - .tx_empty = serial_m3110_tx_empty, - .set_mctrl = serial_m3110_set_mctrl, - .get_mctrl = serial_m3110_get_mctrl, - .stop_tx = serial_m3110_stop_tx, - .start_tx = serial_m3110_start_tx, - .stop_rx = serial_m3110_stop_rx, - .enable_ms = serial_m3110_enable_ms, - .break_ctl = serial_m3110_break_ctl, - .startup = serial_m3110_startup, - .shutdown = serial_m3110_shutdown, - .set_termios = serial_m3110_set_termios, - .pm = serial_m3110_pm, - .type = serial_m3110_type, - .release_port = serial_m3110_release_port, - .request_port = serial_m3110_request_port, - .config_port = serial_m3110_config_port, - .verify_port = serial_m3110_verify_port, -}; - -static struct uart_driver serial_m3110_reg = { - .owner = THIS_MODULE, - .driver_name = "MRST serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = 1, - .cons = &serial_m3110_console, -}; - -#ifdef CONFIG_PM -static int serial_m3110_suspend(struct spi_device *spi, pm_message_t state) -{ - struct uart_max3110 *max = spi_get_drvdata(spi); - - disable_irq(max->irq); - uart_suspend_port(&serial_m3110_reg, &max->port); - max3110_out(max, max->cur_conf | WC_SW_SHDI); - return 0; -} - -static int serial_m3110_resume(struct spi_device *spi) -{ - struct uart_max3110 *max = spi_get_drvdata(spi); - - max3110_out(max, max->cur_conf); - uart_resume_port(&serial_m3110_reg, &max->port); - enable_irq(max->irq); - return 0; -} -#else -#define serial_m3110_suspend NULL -#define serial_m3110_resume NULL -#endif - -static int __devinit serial_m3110_probe(struct spi_device *spi) -{ - struct uart_max3110 *max; - void *buffer; - u16 res; - int ret = 0; - - max = kzalloc(sizeof(*max), GFP_KERNEL); - if (!max) - return -ENOMEM; - - /* Set spi info */ - spi->bits_per_word = 16; - max->clock = MAX3110_HIGH_CLK; - - spi_setup(spi); - - max->port.type = PORT_MAX3100; - max->port.fifosize = 2; /* Only have 16b buffer */ - max->port.ops = &serial_m3110_ops; - max->port.line = 0; - max->port.dev = &spi->dev; - max->port.uartclk = 115200; - - max->spi = spi; - strcpy(max->name, spi->modalias); - max->irq = (u16)spi->irq; - - mutex_init(&max->thread_mutex); - - max->word_7bits = 0; - max->parity = 0; - max->baud = 0; - - max->cur_conf = 0; - max->uart_flags = 0; - - /* Check if reading configuration register returns something sane */ - - res = RC_TAG; - ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0); - if (ret < 0 || res == 0 || res == 0xffff) { - printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)", - res); - ret = -ENODEV; - goto err_get_page; - } - - buffer = (void *)__get_free_page(GFP_KERNEL); - if (!buffer) { - ret = -ENOMEM; - goto err_get_page; - } - max->con_xmit.buf = buffer; - max->con_xmit.head = 0; - max->con_xmit.tail = 0; - - max->main_thread = kthread_run(max3110_main_thread, - max, "max3110_main"); - if (IS_ERR(max->main_thread)) { - ret = PTR_ERR(max->main_thread); - goto err_kthread; - } - - spi_set_drvdata(spi, max); - pmax = max; - - /* Give membase a psudo value to pass serial_core's check */ - max->port.membase = (void *)0xff110000; - uart_add_one_port(&serial_m3110_reg, &max->port); - - return 0; - -err_kthread: - free_page((unsigned long)buffer); -err_get_page: - kfree(max); - return ret; -} - -static int __devexit serial_m3110_remove(struct spi_device *dev) -{ - struct uart_max3110 *max = spi_get_drvdata(dev); - - if (!max) - return 0; - - uart_remove_one_port(&serial_m3110_reg, &max->port); - - free_page((unsigned long)max->con_xmit.buf); - - if (max->main_thread) - kthread_stop(max->main_thread); - - kfree(max); - return 0; -} - -static struct spi_driver uart_max3110_driver = { - .driver = { - .name = "spi_max3111", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - .probe = serial_m3110_probe, - .remove = __devexit_p(serial_m3110_remove), - .suspend = serial_m3110_suspend, - .resume = serial_m3110_resume, -}; - -static int __init serial_m3110_init(void) -{ - int ret = 0; - - ret = uart_register_driver(&serial_m3110_reg); - if (ret) - return ret; - - ret = spi_register_driver(&uart_max3110_driver); - if (ret) - uart_unregister_driver(&serial_m3110_reg); - - return ret; -} - -static void __exit serial_m3110_exit(void) -{ - spi_unregister_driver(&uart_max3110_driver); - uart_unregister_driver(&serial_m3110_reg); -} - -module_init(serial_m3110_init); -module_exit(serial_m3110_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("max3110-uart"); diff --git a/drivers/serial/mrst_max3110.h b/drivers/serial/mrst_max3110.h deleted file mode 100644 index d1ef43af397c..000000000000 --- a/drivers/serial/mrst_max3110.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef _MRST_MAX3110_H -#define _MRST_MAX3110_H - -#define MAX3110_HIGH_CLK 0x1 /* 3.6864 MHZ */ -#define MAX3110_LOW_CLK 0x0 /* 1.8432 MHZ */ - -/* status bits for all 4 MAX3110 operate modes */ -#define MAX3110_READ_DATA_AVAILABLE (1 << 15) -#define MAX3110_WRITE_BUF_EMPTY (1 << 14) - -#define WC_TAG (3 << 14) -#define RC_TAG (1 << 14) -#define WD_TAG (2 << 14) -#define RD_TAG (0 << 14) - -/* bits def for write configuration */ -#define WC_FIFO_ENABLE_MASK (1 << 13) -#define WC_FIFO_ENABLE (0 << 13) - -#define WC_SW_SHDI (1 << 12) - -#define WC_IRQ_MASK (0xF << 8) -#define WC_TXE_IRQ_ENABLE (1 << 11) /* TX empty irq */ -#define WC_RXA_IRQ_ENABLE (1 << 10) /* RX availabe irq */ -#define WC_PAR_HIGH_IRQ_ENABLE (1 << 9) -#define WC_REC_ACT_IRQ_ENABLE (1 << 8) - -#define WC_IRDA_ENABLE (1 << 7) - -#define WC_STOPBITS_MASK (1 << 6) -#define WC_2_STOPBITS (1 << 6) -#define WC_1_STOPBITS (0 << 6) - -#define WC_PARITY_ENABLE_MASK (1 << 5) -#define WC_PARITY_ENABLE (1 << 5) - -#define WC_WORDLEN_MASK (1 << 4) -#define WC_7BIT_WORD (1 << 4) -#define WC_8BIT_WORD (0 << 4) - -#define WC_BAUD_DIV_MASK (0xF) -#define WC_BAUD_DR1 (0x0) -#define WC_BAUD_DR2 (0x1) -#define WC_BAUD_DR4 (0x2) -#define WC_BAUD_DR8 (0x3) -#define WC_BAUD_DR16 (0x4) -#define WC_BAUD_DR32 (0x5) -#define WC_BAUD_DR64 (0x6) -#define WC_BAUD_DR128 (0x7) -#define WC_BAUD_DR3 (0x8) -#define WC_BAUD_DR6 (0x9) -#define WC_BAUD_DR12 (0xA) -#define WC_BAUD_DR24 (0xB) -#define WC_BAUD_DR48 (0xC) -#define WC_BAUD_DR96 (0xD) -#define WC_BAUD_DR192 (0xE) -#define WC_BAUD_DR384 (0xF) - -#define M3110_RX_FIFO_DEPTH 8 -#endif diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c deleted file mode 100644 index 8e43a7b69e64..000000000000 --- a/drivers/serial/msm_serial.c +++ /dev/null @@ -1,758 +0,0 @@ -/* - * drivers/serial/msm_serial.c - driver for msm7k serial device and console - * - * Copyright (C) 2007 Google, Inc. - * Author: Robert Love - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#if defined(CONFIG_SERIAL_MSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -# define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "msm_serial.h" - -struct msm_port { - struct uart_port uart; - char name[16]; - struct clk *clk; - unsigned int imr; -}; - -static void msm_stop_tx(struct uart_port *port) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - - msm_port->imr &= ~UART_IMR_TXLEV; - msm_write(port, msm_port->imr, UART_IMR); -} - -static void msm_start_tx(struct uart_port *port) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - - msm_port->imr |= UART_IMR_TXLEV; - msm_write(port, msm_port->imr, UART_IMR); -} - -static void msm_stop_rx(struct uart_port *port) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - - msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE); - msm_write(port, msm_port->imr, UART_IMR); -} - -static void msm_enable_ms(struct uart_port *port) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - - msm_port->imr |= UART_IMR_DELTA_CTS; - msm_write(port, msm_port->imr, UART_IMR); -} - -static void handle_rx(struct uart_port *port) -{ - struct tty_struct *tty = port->state->port.tty; - unsigned int sr; - - /* - * Handle overrun. My understanding of the hardware is that overrun - * is not tied to the RX buffer, so we handle the case out of band. - */ - if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) { - port->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); - } - - /* and now the main RX loop */ - while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) { - unsigned int c; - char flag = TTY_NORMAL; - - c = msm_read(port, UART_RF); - - if (sr & UART_SR_RX_BREAK) { - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } else if (sr & UART_SR_PAR_FRAME_ERR) { - port->icount.frame++; - } else { - port->icount.rx++; - } - - /* Mask conditions we're ignorning. */ - sr &= port->read_status_mask; - - if (sr & UART_SR_RX_BREAK) { - flag = TTY_BREAK; - } else if (sr & UART_SR_PAR_FRAME_ERR) { - flag = TTY_FRAME; - } - - if (!uart_handle_sysrq_char(port, c)) - tty_insert_flip_char(tty, c, flag); - } - - tty_flip_buffer_push(tty); -} - -static void handle_tx(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - struct msm_port *msm_port = UART_TO_MSM(port); - int sent_tx; - - if (port->x_char) { - msm_write(port, port->x_char, UART_TF); - port->icount.tx++; - port->x_char = 0; - } - - while (msm_read(port, UART_SR) & UART_SR_TX_READY) { - if (uart_circ_empty(xmit)) { - /* disable tx interrupts */ - msm_port->imr &= ~UART_IMR_TXLEV; - msm_write(port, msm_port->imr, UART_IMR); - break; - } - - msm_write(port, xmit->buf[xmit->tail], UART_TF); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - sent_tx = 1; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - -static void handle_delta_cts(struct uart_port *port) -{ - msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); - port->icount.cts++; - wake_up_interruptible(&port->state->port.delta_msr_wait); -} - -static irqreturn_t msm_irq(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct msm_port *msm_port = UART_TO_MSM(port); - unsigned int misr; - - spin_lock(&port->lock); - misr = msm_read(port, UART_MISR); - msm_write(port, 0, UART_IMR); /* disable interrupt */ - - if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) - handle_rx(port); - if (misr & UART_IMR_TXLEV) - handle_tx(port); - if (misr & UART_IMR_DELTA_CTS) - handle_delta_cts(port); - - msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */ - spin_unlock(&port->lock); - - return IRQ_HANDLED; -} - -static unsigned int msm_tx_empty(struct uart_port *port) -{ - return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0; -} - -static unsigned int msm_get_mctrl(struct uart_port *port) -{ - return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS; -} - -static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - unsigned int mr; - - mr = msm_read(port, UART_MR1); - - if (!(mctrl & TIOCM_RTS)) { - mr &= ~UART_MR1_RX_RDY_CTL; - msm_write(port, mr, UART_MR1); - msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR); - } else { - mr |= UART_MR1_RX_RDY_CTL; - msm_write(port, mr, UART_MR1); - } -} - -static void msm_break_ctl(struct uart_port *port, int break_ctl) -{ - if (break_ctl) - msm_write(port, UART_CR_CMD_START_BREAK, UART_CR); - else - msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR); -} - -static int msm_set_baud_rate(struct uart_port *port, unsigned int baud) -{ - unsigned int baud_code, rxstale, watermark; - - switch (baud) { - case 300: - baud_code = UART_CSR_300; - rxstale = 1; - break; - case 600: - baud_code = UART_CSR_600; - rxstale = 1; - break; - case 1200: - baud_code = UART_CSR_1200; - rxstale = 1; - break; - case 2400: - baud_code = UART_CSR_2400; - rxstale = 1; - break; - case 4800: - baud_code = UART_CSR_4800; - rxstale = 1; - break; - case 9600: - baud_code = UART_CSR_9600; - rxstale = 2; - break; - case 14400: - baud_code = UART_CSR_14400; - rxstale = 3; - break; - case 19200: - baud_code = UART_CSR_19200; - rxstale = 4; - break; - case 28800: - baud_code = UART_CSR_28800; - rxstale = 6; - break; - case 38400: - baud_code = UART_CSR_38400; - rxstale = 8; - break; - case 57600: - baud_code = UART_CSR_57600; - rxstale = 16; - break; - case 115200: - default: - baud_code = UART_CSR_115200; - baud = 115200; - rxstale = 31; - break; - } - - msm_write(port, baud_code, UART_CSR); - - /* RX stale watermark */ - watermark = UART_IPR_STALE_LSB & rxstale; - watermark |= UART_IPR_RXSTALE_LAST; - watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2); - msm_write(port, watermark, UART_IPR); - - /* set RX watermark */ - watermark = (port->fifosize * 3) / 4; - msm_write(port, watermark, UART_RFWR); - - /* set TX watermark */ - msm_write(port, 10, UART_TFWR); - - return baud; -} - -static void msm_reset(struct uart_port *port) -{ - /* reset everything */ - msm_write(port, UART_CR_CMD_RESET_RX, UART_CR); - msm_write(port, UART_CR_CMD_RESET_TX, UART_CR); - msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); - msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR); - msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); - msm_write(port, UART_CR_CMD_SET_RFR, UART_CR); -} - -static void msm_init_clock(struct uart_port *port) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - - clk_enable(msm_port->clk); - msm_serial_set_mnd_regs(port); -} - -static int msm_startup(struct uart_port *port) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - unsigned int data, rfr_level; - int ret; - - snprintf(msm_port->name, sizeof(msm_port->name), - "msm_serial%d", port->line); - - ret = request_irq(port->irq, msm_irq, IRQF_TRIGGER_HIGH, - msm_port->name, port); - if (unlikely(ret)) - return ret; - - msm_init_clock(port); - - if (likely(port->fifosize > 12)) - rfr_level = port->fifosize - 12; - else - rfr_level = port->fifosize; - - /* set automatic RFR level */ - data = msm_read(port, UART_MR1); - data &= ~UART_MR1_AUTO_RFR_LEVEL1; - data &= ~UART_MR1_AUTO_RFR_LEVEL0; - data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2); - data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level; - msm_write(port, data, UART_MR1); - - /* make sure that RXSTALE count is non-zero */ - data = msm_read(port, UART_IPR); - if (unlikely(!data)) { - data |= UART_IPR_RXSTALE_LAST; - data |= UART_IPR_STALE_LSB; - msm_write(port, data, UART_IPR); - } - - msm_reset(port); - - msm_write(port, 0x05, UART_CR); /* enable TX & RX */ - - /* turn on RX and CTS interrupts */ - msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE | - UART_IMR_CURRENT_CTS; - msm_write(port, msm_port->imr, UART_IMR); - - return 0; -} - -static void msm_shutdown(struct uart_port *port) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - - msm_port->imr = 0; - msm_write(port, 0, UART_IMR); /* disable interrupts */ - - clk_disable(msm_port->clk); - - free_irq(port->irq, port); -} - -static void msm_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned long flags; - unsigned int baud, mr; - - spin_lock_irqsave(&port->lock, flags); - - /* calculate and set baud rate */ - baud = uart_get_baud_rate(port, termios, old, 300, 115200); - baud = msm_set_baud_rate(port, baud); - if (tty_termios_baud_rate(termios)) - tty_termios_encode_baud_rate(termios, baud, baud); - - /* calculate parity */ - mr = msm_read(port, UART_MR2); - mr &= ~UART_MR2_PARITY_MODE; - if (termios->c_cflag & PARENB) { - if (termios->c_cflag & PARODD) - mr |= UART_MR2_PARITY_MODE_ODD; - else if (termios->c_cflag & CMSPAR) - mr |= UART_MR2_PARITY_MODE_SPACE; - else - mr |= UART_MR2_PARITY_MODE_EVEN; - } - - /* calculate bits per char */ - mr &= ~UART_MR2_BITS_PER_CHAR; - switch (termios->c_cflag & CSIZE) { - case CS5: - mr |= UART_MR2_BITS_PER_CHAR_5; - break; - case CS6: - mr |= UART_MR2_BITS_PER_CHAR_6; - break; - case CS7: - mr |= UART_MR2_BITS_PER_CHAR_7; - break; - case CS8: - default: - mr |= UART_MR2_BITS_PER_CHAR_8; - break; - } - - /* calculate stop bits */ - mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO); - if (termios->c_cflag & CSTOPB) - mr |= UART_MR2_STOP_BIT_LEN_TWO; - else - mr |= UART_MR2_STOP_BIT_LEN_ONE; - - /* set parity, bits per char, and stop bit */ - msm_write(port, mr, UART_MR2); - - /* calculate and set hardware flow control */ - mr = msm_read(port, UART_MR1); - mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL); - if (termios->c_cflag & CRTSCTS) { - mr |= UART_MR1_CTS_CTL; - mr |= UART_MR1_RX_RDY_CTL; - } - msm_write(port, mr, UART_MR1); - - /* Configure status bits to ignore based on termio flags. */ - port->read_status_mask = 0; - if (termios->c_iflag & INPCK) - port->read_status_mask |= UART_SR_PAR_FRAME_ERR; - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= UART_SR_RX_BREAK; - - uart_update_timeout(port, termios->c_cflag, baud); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *msm_type(struct uart_port *port) -{ - return "MSM"; -} - -static void msm_release_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - struct resource *resource; - resource_size_t size; - - resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (unlikely(!resource)) - return; - size = resource->end - resource->start + 1; - - release_mem_region(port->mapbase, size); - iounmap(port->membase); - port->membase = NULL; -} - -static int msm_request_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - struct resource *resource; - resource_size_t size; - - resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (unlikely(!resource)) - return -ENXIO; - size = resource->end - resource->start + 1; - - if (unlikely(!request_mem_region(port->mapbase, size, "msm_serial"))) - return -EBUSY; - - port->membase = ioremap(port->mapbase, size); - if (!port->membase) { - release_mem_region(port->mapbase, size); - return -EBUSY; - } - - return 0; -} - -static void msm_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_MSM; - msm_request_port(port); - } -} - -static int msm_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM)) - return -EINVAL; - if (unlikely(port->irq != ser->irq)) - return -EINVAL; - return 0; -} - -static void msm_power(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - - switch (state) { - case 0: - clk_enable(msm_port->clk); - break; - case 3: - clk_disable(msm_port->clk); - break; - default: - printk(KERN_ERR "msm_serial: Unknown PM state %d\n", state); - } -} - -static struct uart_ops msm_uart_pops = { - .tx_empty = msm_tx_empty, - .set_mctrl = msm_set_mctrl, - .get_mctrl = msm_get_mctrl, - .stop_tx = msm_stop_tx, - .start_tx = msm_start_tx, - .stop_rx = msm_stop_rx, - .enable_ms = msm_enable_ms, - .break_ctl = msm_break_ctl, - .startup = msm_startup, - .shutdown = msm_shutdown, - .set_termios = msm_set_termios, - .type = msm_type, - .release_port = msm_release_port, - .request_port = msm_request_port, - .config_port = msm_config_port, - .verify_port = msm_verify_port, - .pm = msm_power, -}; - -static struct msm_port msm_uart_ports[] = { - { - .uart = { - .iotype = UPIO_MEM, - .ops = &msm_uart_pops, - .flags = UPF_BOOT_AUTOCONF, - .fifosize = 512, - .line = 0, - }, - }, - { - .uart = { - .iotype = UPIO_MEM, - .ops = &msm_uart_pops, - .flags = UPF_BOOT_AUTOCONF, - .fifosize = 512, - .line = 1, - }, - }, - { - .uart = { - .iotype = UPIO_MEM, - .ops = &msm_uart_pops, - .flags = UPF_BOOT_AUTOCONF, - .fifosize = 64, - .line = 2, - }, - }, -}; - -#define UART_NR ARRAY_SIZE(msm_uart_ports) - -static inline struct uart_port *get_port_from_line(unsigned int line) -{ - return &msm_uart_ports[line].uart; -} - -#ifdef CONFIG_SERIAL_MSM_CONSOLE - -static void msm_console_putchar(struct uart_port *port, int c) -{ - while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) - ; - msm_write(port, c, UART_TF); -} - -static void msm_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_port *port; - struct msm_port *msm_port; - - BUG_ON(co->index < 0 || co->index >= UART_NR); - - port = get_port_from_line(co->index); - msm_port = UART_TO_MSM(port); - - spin_lock(&port->lock); - uart_console_write(port, s, count, msm_console_putchar); - spin_unlock(&port->lock); -} - -static int __init msm_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud, flow, bits, parity; - - if (unlikely(co->index >= UART_NR || co->index < 0)) - return -ENXIO; - - port = get_port_from_line(co->index); - - if (unlikely(!port->membase)) - return -ENXIO; - - port->cons = co; - - msm_init_clock(port); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - bits = 8; - parity = 'n'; - flow = 'n'; - msm_write(port, UART_MR2_BITS_PER_CHAR_8 | UART_MR2_STOP_BIT_LEN_ONE, - UART_MR2); /* 8N1 */ - - if (baud < 300 || baud > 115200) - baud = 115200; - msm_set_baud_rate(port, baud); - - msm_reset(port); - - printk(KERN_INFO "msm_serial: console setup on port #%d\n", port->line); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver msm_uart_driver; - -static struct console msm_console = { - .name = "ttyMSM", - .write = msm_console_write, - .device = uart_console_device, - .setup = msm_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &msm_uart_driver, -}; - -#define MSM_CONSOLE (&msm_console) - -#else -#define MSM_CONSOLE NULL -#endif - -static struct uart_driver msm_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "msm_serial", - .dev_name = "ttyMSM", - .nr = UART_NR, - .cons = MSM_CONSOLE, -}; - -static int __init msm_serial_probe(struct platform_device *pdev) -{ - struct msm_port *msm_port; - struct resource *resource; - struct uart_port *port; - int irq; - - if (unlikely(pdev->id < 0 || pdev->id >= UART_NR)) - return -ENXIO; - - printk(KERN_INFO "msm_serial: detected port #%d\n", pdev->id); - - port = get_port_from_line(pdev->id); - port->dev = &pdev->dev; - msm_port = UART_TO_MSM(port); - - msm_port->clk = clk_get(&pdev->dev, "uart_clk"); - if (IS_ERR(msm_port->clk)) - return PTR_ERR(msm_port->clk); - port->uartclk = clk_get_rate(msm_port->clk); - printk(KERN_INFO "uartclk = %d\n", port->uartclk); - - - resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (unlikely(!resource)) - return -ENXIO; - port->mapbase = resource->start; - - irq = platform_get_irq(pdev, 0); - if (unlikely(irq < 0)) - return -ENXIO; - port->irq = irq; - - platform_set_drvdata(pdev, port); - - return uart_add_one_port(&msm_uart_driver, port); -} - -static int __devexit msm_serial_remove(struct platform_device *pdev) -{ - struct msm_port *msm_port = platform_get_drvdata(pdev); - - clk_put(msm_port->clk); - - return 0; -} - -static struct platform_driver msm_platform_driver = { - .remove = msm_serial_remove, - .driver = { - .name = "msm_serial", - .owner = THIS_MODULE, - }, -}; - -static int __init msm_serial_init(void) -{ - int ret; - - ret = uart_register_driver(&msm_uart_driver); - if (unlikely(ret)) - return ret; - - ret = platform_driver_probe(&msm_platform_driver, msm_serial_probe); - if (unlikely(ret)) - uart_unregister_driver(&msm_uart_driver); - - printk(KERN_INFO "msm_serial: driver initialized\n"); - - return ret; -} - -static void __exit msm_serial_exit(void) -{ -#ifdef CONFIG_SERIAL_MSM_CONSOLE - unregister_console(&msm_console); -#endif - platform_driver_unregister(&msm_platform_driver); - uart_unregister_driver(&msm_uart_driver); -} - -module_init(msm_serial_init); -module_exit(msm_serial_exit); - -MODULE_AUTHOR("Robert Love "); -MODULE_DESCRIPTION("Driver for msm7x serial device"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/msm_serial.h b/drivers/serial/msm_serial.h deleted file mode 100644 index f6ca9ca79e98..000000000000 --- a/drivers/serial/msm_serial.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * drivers/serial/msm_serial.h - * - * Copyright (C) 2007 Google, Inc. - * Author: Robert Love - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __DRIVERS_SERIAL_MSM_SERIAL_H -#define __DRIVERS_SERIAL_MSM_SERIAL_H - -#define UART_MR1 0x0000 - -#define UART_MR1_AUTO_RFR_LEVEL0 0x3F -#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00 -#define UART_MR1_RX_RDY_CTL (1 << 7) -#define UART_MR1_CTS_CTL (1 << 6) - -#define UART_MR2 0x0004 -#define UART_MR2_ERROR_MODE (1 << 6) -#define UART_MR2_BITS_PER_CHAR 0x30 -#define UART_MR2_BITS_PER_CHAR_5 (0x0 << 4) -#define UART_MR2_BITS_PER_CHAR_6 (0x1 << 4) -#define UART_MR2_BITS_PER_CHAR_7 (0x2 << 4) -#define UART_MR2_BITS_PER_CHAR_8 (0x3 << 4) -#define UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2) -#define UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2) -#define UART_MR2_PARITY_MODE_NONE 0x0 -#define UART_MR2_PARITY_MODE_ODD 0x1 -#define UART_MR2_PARITY_MODE_EVEN 0x2 -#define UART_MR2_PARITY_MODE_SPACE 0x3 -#define UART_MR2_PARITY_MODE 0x3 - -#define UART_CSR 0x0008 -#define UART_CSR_115200 0xFF -#define UART_CSR_57600 0xEE -#define UART_CSR_38400 0xDD -#define UART_CSR_28800 0xCC -#define UART_CSR_19200 0xBB -#define UART_CSR_14400 0xAA -#define UART_CSR_9600 0x99 -#define UART_CSR_4800 0x77 -#define UART_CSR_2400 0x55 -#define UART_CSR_1200 0x44 -#define UART_CSR_600 0x33 -#define UART_CSR_300 0x22 - -#define UART_TF 0x000C - -#define UART_CR 0x0010 -#define UART_CR_CMD_NULL (0 << 4) -#define UART_CR_CMD_RESET_RX (1 << 4) -#define UART_CR_CMD_RESET_TX (2 << 4) -#define UART_CR_CMD_RESET_ERR (3 << 4) -#define UART_CR_CMD_RESET_BREAK_INT (4 << 4) -#define UART_CR_CMD_START_BREAK (5 << 4) -#define UART_CR_CMD_STOP_BREAK (6 << 4) -#define UART_CR_CMD_RESET_CTS (7 << 4) -#define UART_CR_CMD_PACKET_MODE (9 << 4) -#define UART_CR_CMD_MODE_RESET (12 << 4) -#define UART_CR_CMD_SET_RFR (13 << 4) -#define UART_CR_CMD_RESET_RFR (14 << 4) -#define UART_CR_TX_DISABLE (1 << 3) -#define UART_CR_TX_ENABLE (1 << 3) -#define UART_CR_RX_DISABLE (1 << 3) -#define UART_CR_RX_ENABLE (1 << 3) - -#define UART_IMR 0x0014 -#define UART_IMR_TXLEV (1 << 0) -#define UART_IMR_RXSTALE (1 << 3) -#define UART_IMR_RXLEV (1 << 4) -#define UART_IMR_DELTA_CTS (1 << 5) -#define UART_IMR_CURRENT_CTS (1 << 6) - -#define UART_IPR_RXSTALE_LAST 0x20 -#define UART_IPR_STALE_LSB 0x1F -#define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80 - -#define UART_IPR 0x0018 -#define UART_TFWR 0x001C -#define UART_RFWR 0x0020 -#define UART_HCR 0x0024 - -#define UART_MREG 0x0028 -#define UART_NREG 0x002C -#define UART_DREG 0x0030 -#define UART_MNDREG 0x0034 -#define UART_IRDA 0x0038 -#define UART_MISR_MODE 0x0040 -#define UART_MISR_RESET 0x0044 -#define UART_MISR_EXPORT 0x0048 -#define UART_MISR_VAL 0x004C -#define UART_TEST_CTRL 0x0050 - -#define UART_SR 0x0008 -#define UART_SR_HUNT_CHAR (1 << 7) -#define UART_SR_RX_BREAK (1 << 6) -#define UART_SR_PAR_FRAME_ERR (1 << 5) -#define UART_SR_OVERRUN (1 << 4) -#define UART_SR_TX_EMPTY (1 << 3) -#define UART_SR_TX_READY (1 << 2) -#define UART_SR_RX_FULL (1 << 1) -#define UART_SR_RX_READY (1 << 0) - -#define UART_RF 0x000C -#define UART_MISR 0x0010 -#define UART_ISR 0x0014 - -#define UART_TO_MSM(uart_port) ((struct msm_port *) uart_port) - -static inline -void msm_write(struct uart_port *port, unsigned int val, unsigned int off) -{ - __raw_writel(val, port->membase + off); -} - -static inline -unsigned int msm_read(struct uart_port *port, unsigned int off) -{ - return __raw_readl(port->membase + off); -} - -/* - * Setup the MND registers to use the TCXO clock. - */ -static inline void msm_serial_set_mnd_regs_tcxo(struct uart_port *port) -{ - msm_write(port, 0x06, UART_MREG); - msm_write(port, 0xF1, UART_NREG); - msm_write(port, 0x0F, UART_DREG); - msm_write(port, 0x1A, UART_MNDREG); -} - -/* - * Setup the MND registers to use the TCXO clock divided by 4. - */ -static inline void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port) -{ - msm_write(port, 0x18, UART_MREG); - msm_write(port, 0xF6, UART_NREG); - msm_write(port, 0x0F, UART_DREG); - msm_write(port, 0x0A, UART_MNDREG); -} - -static inline -void msm_serial_set_mnd_regs_from_uartclk(struct uart_port *port) -{ - if (port->uartclk == 19200000) - msm_serial_set_mnd_regs_tcxo(port); - else - msm_serial_set_mnd_regs_tcxoby4(port); -} - -/* - * TROUT has a specific defect that makes it report it's uartclk - * as 19.2Mhz (TCXO) when it's actually 4.8Mhz (TCXO/4). This special - * cases TROUT to use the right clock. - */ -#ifdef CONFIG_MACH_TROUT -#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_tcxoby4 -#else -#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_from_uartclk -#endif - -#endif /* __DRIVERS_SERIAL_MSM_SERIAL_H */ diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c deleted file mode 100644 index 9711e06a8374..000000000000 --- a/drivers/serial/mux.c +++ /dev/null @@ -1,633 +0,0 @@ -/* -** mux.c: -** serial driver for the Mux console found in some PA-RISC servers. -** -** (c) Copyright 2002 Ryan Bradetich -** (c) Copyright 2002 Hewlett-Packard Company -** -** This program is free software; you can redistribute it and/or modify -** it under the terms of the GNU General Public License as published by -** the Free Software Foundation; either version 2 of the License, or -** (at your option) any later version. -** -** This Driver currently only supports the console (port 0) on the MUX. -** Additional work will be needed on this driver to enable the full -** functionality of the MUX. -** -*/ - -#include -#include -#include -#include -#include -#include -#include /* for udelay */ -#include -#include -#include -#include - -#ifdef CONFIG_MAGIC_SYSRQ -#include -#define SUPPORT_SYSRQ -#endif - -#include - -#define MUX_OFFSET 0x800 -#define MUX_LINE_OFFSET 0x80 - -#define MUX_FIFO_SIZE 255 -#define MUX_POLL_DELAY (30 * HZ / 1000) - -#define IO_DATA_REG_OFFSET 0x3c -#define IO_DCOUNT_REG_OFFSET 0x40 - -#define MUX_EOFIFO(status) ((status & 0xF000) == 0xF000) -#define MUX_STATUS(status) ((status & 0xF000) == 0x8000) -#define MUX_BREAK(status) ((status & 0xF000) == 0x2000) - -#define MUX_NR 256 -static unsigned int port_cnt __read_mostly; -struct mux_port { - struct uart_port port; - int enabled; -}; -static struct mux_port mux_ports[MUX_NR]; - -static struct uart_driver mux_driver = { - .owner = THIS_MODULE, - .driver_name = "ttyB", - .dev_name = "ttyB", - .major = MUX_MAJOR, - .minor = 0, - .nr = MUX_NR, -}; - -static struct timer_list mux_timer; - -#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + IO_DATA_REG_OFFSET) -#define UART_GET_FIFO_CNT(p) __raw_readl((p)->membase + IO_DCOUNT_REG_OFFSET) - -/** - * get_mux_port_count - Get the number of available ports on the Mux. - * @dev: The parisc device. - * - * This function is used to determine the number of ports the Mux - * supports. The IODC data reports the number of ports the Mux - * can support, but there are cases where not all the Mux ports - * are connected. This function can override the IODC and - * return the true port count. - */ -static int __init get_mux_port_count(struct parisc_device *dev) -{ - int status; - u8 iodc_data[32]; - unsigned long bytecnt; - - /* If this is the built-in Mux for the K-Class (Eole CAP/MUX), - * we only need to allocate resources for 1 port since the - * other 7 ports are not connected. - */ - if(dev->id.hversion == 0x15) - return 1; - - status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32); - BUG_ON(status != PDC_OK); - - /* Return the number of ports specified in the iodc data. */ - return ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8; -} - -/** - * mux_tx_empty - Check if the transmitter fifo is empty. - * @port: Ptr to the uart_port. - * - * This function test if the transmitter fifo for the port - * described by 'port' is empty. If it is empty, this function - * should return TIOCSER_TEMT, otherwise return 0. - */ -static unsigned int mux_tx_empty(struct uart_port *port) -{ - return UART_GET_FIFO_CNT(port) ? 0 : TIOCSER_TEMT; -} - -/** - * mux_set_mctrl - Set the current state of the modem control inputs. - * @ports: Ptr to the uart_port. - * @mctrl: Modem control bits. - * - * The Serial MUX does not support CTS, DCD or DSR so this function - * is ignored. - */ -static void mux_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -/** - * mux_get_mctrl - Returns the current state of modem control inputs. - * @port: Ptr to the uart_port. - * - * The Serial MUX does not support CTS, DCD or DSR so these lines are - * treated as permanently active. - */ -static unsigned int mux_get_mctrl(struct uart_port *port) -{ - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; -} - -/** - * mux_stop_tx - Stop transmitting characters. - * @port: Ptr to the uart_port. - * - * The Serial MUX does not support this function. - */ -static void mux_stop_tx(struct uart_port *port) -{ -} - -/** - * mux_start_tx - Start transmitting characters. - * @port: Ptr to the uart_port. - * - * The Serial Mux does not support this function. - */ -static void mux_start_tx(struct uart_port *port) -{ -} - -/** - * mux_stop_rx - Stop receiving characters. - * @port: Ptr to the uart_port. - * - * The Serial Mux does not support this function. - */ -static void mux_stop_rx(struct uart_port *port) -{ -} - -/** - * mux_enable_ms - Enable modum status interrupts. - * @port: Ptr to the uart_port. - * - * The Serial Mux does not support this function. - */ -static void mux_enable_ms(struct uart_port *port) -{ -} - -/** - * mux_break_ctl - Control the transmitssion of a break signal. - * @port: Ptr to the uart_port. - * @break_state: Raise/Lower the break signal. - * - * The Serial Mux does not support this function. - */ -static void mux_break_ctl(struct uart_port *port, int break_state) -{ -} - -/** - * mux_write - Write chars to the mux fifo. - * @port: Ptr to the uart_port. - * - * This function writes all the data from the uart buffer to - * the mux fifo. - */ -static void mux_write(struct uart_port *port) -{ - int count; - struct circ_buf *xmit = &port->state->xmit; - - if(port->x_char) { - UART_PUT_CHAR(port, port->x_char); - port->icount.tx++; - port->x_char = 0; - return; - } - - if(uart_circ_empty(xmit) || uart_tx_stopped(port)) { - mux_stop_tx(port); - return; - } - - count = (port->fifosize) - UART_GET_FIFO_CNT(port); - do { - UART_PUT_CHAR(port, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if(uart_circ_empty(xmit)) - break; - - } while(--count > 0); - - while(UART_GET_FIFO_CNT(port)) - udelay(1); - - if(uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - mux_stop_tx(port); -} - -/** - * mux_read - Read chars from the mux fifo. - * @port: Ptr to the uart_port. - * - * This reads all available data from the mux's fifo and pushes - * the data to the tty layer. - */ -static void mux_read(struct uart_port *port) -{ - int data; - struct tty_struct *tty = port->state->port.tty; - __u32 start_count = port->icount.rx; - - while(1) { - data = __raw_readl(port->membase + IO_DATA_REG_OFFSET); - - if (MUX_STATUS(data)) - continue; - - if (MUX_EOFIFO(data)) - break; - - port->icount.rx++; - - if (MUX_BREAK(data)) { - port->icount.brk++; - if(uart_handle_break(port)) - continue; - } - - if (uart_handle_sysrq_char(port, data & 0xffu)) - continue; - - tty_insert_flip_char(tty, data & 0xFF, TTY_NORMAL); - } - - if (start_count != port->icount.rx) { - tty_flip_buffer_push(tty); - } -} - -/** - * mux_startup - Initialize the port. - * @port: Ptr to the uart_port. - * - * Grab any resources needed for this port and start the - * mux timer. - */ -static int mux_startup(struct uart_port *port) -{ - mux_ports[port->line].enabled = 1; - return 0; -} - -/** - * mux_shutdown - Disable the port. - * @port: Ptr to the uart_port. - * - * Release any resources needed for the port. - */ -static void mux_shutdown(struct uart_port *port) -{ - mux_ports[port->line].enabled = 0; -} - -/** - * mux_set_termios - Chane port parameters. - * @port: Ptr to the uart_port. - * @termios: new termios settings. - * @old: old termios settings. - * - * The Serial Mux does not support this function. - */ -static void -mux_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ -} - -/** - * mux_type - Describe the port. - * @port: Ptr to the uart_port. - * - * Return a pointer to a string constant describing the - * specified port. - */ -static const char *mux_type(struct uart_port *port) -{ - return "Mux"; -} - -/** - * mux_release_port - Release memory and IO regions. - * @port: Ptr to the uart_port. - * - * Release any memory and IO region resources currently in use by - * the port. - */ -static void mux_release_port(struct uart_port *port) -{ -} - -/** - * mux_request_port - Request memory and IO regions. - * @port: Ptr to the uart_port. - * - * Request any memory and IO region resources required by the port. - * If any fail, no resources should be registered when this function - * returns, and it should return -EBUSY on failure. - */ -static int mux_request_port(struct uart_port *port) -{ - return 0; -} - -/** - * mux_config_port - Perform port autoconfiguration. - * @port: Ptr to the uart_port. - * @type: Bitmask of required configurations. - * - * Perform any autoconfiguration steps for the port. This function is - * called if the UPF_BOOT_AUTOCONF flag is specified for the port. - * [Note: This is required for now because of a bug in the Serial core. - * rmk has already submitted a patch to linus, should be available for - * 2.5.47.] - */ -static void mux_config_port(struct uart_port *port, int type) -{ - port->type = PORT_MUX; -} - -/** - * mux_verify_port - Verify the port information. - * @port: Ptr to the uart_port. - * @ser: Ptr to the serial information. - * - * Verify the new serial port information contained within serinfo is - * suitable for this port type. - */ -static int mux_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - if(port->membase == NULL) - return -EINVAL; - - return 0; -} - -/** - * mux_drv_poll - Mux poll function. - * @unused: Unused variable - * - * This function periodically polls the Serial MUX to check for new data. - */ -static void mux_poll(unsigned long unused) -{ - int i; - - for(i = 0; i < port_cnt; ++i) { - if(!mux_ports[i].enabled) - continue; - - mux_read(&mux_ports[i].port); - mux_write(&mux_ports[i].port); - } - - mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY); -} - - -#ifdef CONFIG_SERIAL_MUX_CONSOLE -static void mux_console_write(struct console *co, const char *s, unsigned count) -{ - /* Wait until the FIFO drains. */ - while(UART_GET_FIFO_CNT(&mux_ports[0].port)) - udelay(1); - - while(count--) { - if(*s == '\n') { - UART_PUT_CHAR(&mux_ports[0].port, '\r'); - } - UART_PUT_CHAR(&mux_ports[0].port, *s++); - } - -} - -static int mux_console_setup(struct console *co, char *options) -{ - return 0; -} - -struct tty_driver *mux_console_device(struct console *co, int *index) -{ - *index = co->index; - return mux_driver.tty_driver; -} - -static struct console mux_console = { - .name = "ttyB", - .write = mux_console_write, - .device = mux_console_device, - .setup = mux_console_setup, - .flags = CON_ENABLED | CON_PRINTBUFFER, - .index = 0, -}; - -#define MUX_CONSOLE &mux_console -#else -#define MUX_CONSOLE NULL -#endif - -static struct uart_ops mux_pops = { - .tx_empty = mux_tx_empty, - .set_mctrl = mux_set_mctrl, - .get_mctrl = mux_get_mctrl, - .stop_tx = mux_stop_tx, - .start_tx = mux_start_tx, - .stop_rx = mux_stop_rx, - .enable_ms = mux_enable_ms, - .break_ctl = mux_break_ctl, - .startup = mux_startup, - .shutdown = mux_shutdown, - .set_termios = mux_set_termios, - .type = mux_type, - .release_port = mux_release_port, - .request_port = mux_request_port, - .config_port = mux_config_port, - .verify_port = mux_verify_port, -}; - -/** - * mux_probe - Determine if the Serial Mux should claim this device. - * @dev: The parisc device. - * - * Deterimine if the Serial Mux should claim this chip (return 0) - * or not (return 1). - */ -static int __init mux_probe(struct parisc_device *dev) -{ - int i, status; - - int port_count = get_mux_port_count(dev); - printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.6\n", port_count); - - dev_set_drvdata(&dev->dev, (void *)(long)port_count); - request_mem_region(dev->hpa.start + MUX_OFFSET, - port_count * MUX_LINE_OFFSET, "Mux"); - - if(!port_cnt) { - mux_driver.cons = MUX_CONSOLE; - - status = uart_register_driver(&mux_driver); - if(status) { - printk(KERN_ERR "Serial mux: Unable to register driver.\n"); - return 1; - } - } - - for(i = 0; i < port_count; ++i, ++port_cnt) { - struct uart_port *port = &mux_ports[port_cnt].port; - port->iobase = 0; - port->mapbase = dev->hpa.start + MUX_OFFSET + - (i * MUX_LINE_OFFSET); - port->membase = ioremap_nocache(port->mapbase, MUX_LINE_OFFSET); - port->iotype = UPIO_MEM; - port->type = PORT_MUX; - port->irq = NO_IRQ; - port->uartclk = 0; - port->fifosize = MUX_FIFO_SIZE; - port->ops = &mux_pops; - port->flags = UPF_BOOT_AUTOCONF; - port->line = port_cnt; - - /* The port->timeout needs to match what is present in - * uart_wait_until_sent in serial_core.c. Otherwise - * the time spent in msleep_interruptable will be very - * long, causing the appearance of a console hang. - */ - port->timeout = HZ / 50; - spin_lock_init(&port->lock); - - status = uart_add_one_port(&mux_driver, port); - BUG_ON(status); - } - - return 0; -} - -static int __devexit mux_remove(struct parisc_device *dev) -{ - int i, j; - int port_count = (long)dev_get_drvdata(&dev->dev); - - /* Find Port 0 for this card in the mux_ports list. */ - for(i = 0; i < port_cnt; ++i) { - if(mux_ports[i].port.mapbase == dev->hpa.start + MUX_OFFSET) - break; - } - BUG_ON(i + port_count > port_cnt); - - /* Release the resources associated with each port on the device. */ - for(j = 0; j < port_count; ++j, ++i) { - struct uart_port *port = &mux_ports[i].port; - - uart_remove_one_port(&mux_driver, port); - if(port->membase) - iounmap(port->membase); - } - - release_mem_region(dev->hpa.start + MUX_OFFSET, port_count * MUX_LINE_OFFSET); - return 0; -} - -/* Hack. This idea was taken from the 8250_gsc.c on how to properly order - * the serial port detection in the proper order. The idea is we always - * want the builtin mux to be detected before addin mux cards, so we - * specifically probe for the builtin mux cards first. - * - * This table only contains the parisc_device_id of known builtin mux - * devices. All other mux cards will be detected by the generic mux_tbl. - */ -static struct parisc_device_id builtin_mux_tbl[] = { - { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x15, 0x0000D }, /* All K-class */ - { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x44, 0x0000D }, /* E35, E45, and E55 */ - { 0, } -}; - -static struct parisc_device_id mux_tbl[] = { - { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0000D }, - { 0, } -}; - -MODULE_DEVICE_TABLE(parisc, builtin_mux_tbl); -MODULE_DEVICE_TABLE(parisc, mux_tbl); - -static struct parisc_driver builtin_serial_mux_driver = { - .name = "builtin_serial_mux", - .id_table = builtin_mux_tbl, - .probe = mux_probe, - .remove = __devexit_p(mux_remove), -}; - -static struct parisc_driver serial_mux_driver = { - .name = "serial_mux", - .id_table = mux_tbl, - .probe = mux_probe, - .remove = __devexit_p(mux_remove), -}; - -/** - * mux_init - Serial MUX initialization procedure. - * - * Register the Serial MUX driver. - */ -static int __init mux_init(void) -{ - register_parisc_driver(&builtin_serial_mux_driver); - register_parisc_driver(&serial_mux_driver); - - if(port_cnt > 0) { - /* Start the Mux timer */ - init_timer(&mux_timer); - mux_timer.function = mux_poll; - mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY); - -#ifdef CONFIG_SERIAL_MUX_CONSOLE - register_console(&mux_console); -#endif - } - - return 0; -} - -/** - * mux_exit - Serial MUX cleanup procedure. - * - * Unregister the Serial MUX driver from the tty layer. - */ -static void __exit mux_exit(void) -{ - /* Delete the Mux timer. */ - if(port_cnt > 0) { - del_timer(&mux_timer); -#ifdef CONFIG_SERIAL_MUX_CONSOLE - unregister_console(&mux_console); -#endif - } - - unregister_parisc_driver(&builtin_serial_mux_driver); - unregister_parisc_driver(&serial_mux_driver); - uart_unregister_driver(&mux_driver); -} - -module_init(mux_init); -module_exit(mux_exit); - -MODULE_AUTHOR("Ryan Bradetich"); -MODULE_DESCRIPTION("Serial MUX driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(MUX_MAJOR); diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c deleted file mode 100644 index 7735c9f35fa0..000000000000 --- a/drivers/serial/netx-serial.c +++ /dev/null @@ -1,750 +0,0 @@ -/* - * drivers/serial/netx-serial.c - * - * Copyright (c) 2005 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if defined(CONFIG_SERIAL_NETX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* We've been assigned a range on the "Low-density serial ports" major */ -#define SERIAL_NX_MAJOR 204 -#define MINOR_START 170 - -enum uart_regs { - UART_DR = 0x00, - UART_SR = 0x04, - UART_LINE_CR = 0x08, - UART_BAUDDIV_MSB = 0x0c, - UART_BAUDDIV_LSB = 0x10, - UART_CR = 0x14, - UART_FR = 0x18, - UART_IIR = 0x1c, - UART_ILPR = 0x20, - UART_RTS_CR = 0x24, - UART_RTS_LEAD = 0x28, - UART_RTS_TRAIL = 0x2c, - UART_DRV_ENABLE = 0x30, - UART_BRM_CR = 0x34, - UART_RXFIFO_IRQLEVEL = 0x38, - UART_TXFIFO_IRQLEVEL = 0x3c, -}; - -#define SR_FE (1<<0) -#define SR_PE (1<<1) -#define SR_BE (1<<2) -#define SR_OE (1<<3) - -#define LINE_CR_BRK (1<<0) -#define LINE_CR_PEN (1<<1) -#define LINE_CR_EPS (1<<2) -#define LINE_CR_STP2 (1<<3) -#define LINE_CR_FEN (1<<4) -#define LINE_CR_5BIT (0<<5) -#define LINE_CR_6BIT (1<<5) -#define LINE_CR_7BIT (2<<5) -#define LINE_CR_8BIT (3<<5) -#define LINE_CR_BITS_MASK (3<<5) - -#define CR_UART_EN (1<<0) -#define CR_SIREN (1<<1) -#define CR_SIRLP (1<<2) -#define CR_MSIE (1<<3) -#define CR_RIE (1<<4) -#define CR_TIE (1<<5) -#define CR_RTIE (1<<6) -#define CR_LBE (1<<7) - -#define FR_CTS (1<<0) -#define FR_DSR (1<<1) -#define FR_DCD (1<<2) -#define FR_BUSY (1<<3) -#define FR_RXFE (1<<4) -#define FR_TXFF (1<<5) -#define FR_RXFF (1<<6) -#define FR_TXFE (1<<7) - -#define IIR_MIS (1<<0) -#define IIR_RIS (1<<1) -#define IIR_TIS (1<<2) -#define IIR_RTIS (1<<3) -#define IIR_MASK 0xf - -#define RTS_CR_AUTO (1<<0) -#define RTS_CR_RTS (1<<1) -#define RTS_CR_COUNT (1<<2) -#define RTS_CR_MOD2 (1<<3) -#define RTS_CR_RTS_POL (1<<4) -#define RTS_CR_CTS_CTR (1<<5) -#define RTS_CR_CTS_POL (1<<6) -#define RTS_CR_STICK (1<<7) - -#define UART_PORT_SIZE 0x40 -#define DRIVER_NAME "netx-uart" - -struct netx_port { - struct uart_port port; -}; - -static void netx_stop_tx(struct uart_port *port) -{ - unsigned int val; - val = readl(port->membase + UART_CR); - writel(val & ~CR_TIE, port->membase + UART_CR); -} - -static void netx_stop_rx(struct uart_port *port) -{ - unsigned int val; - val = readl(port->membase + UART_CR); - writel(val & ~CR_RIE, port->membase + UART_CR); -} - -static void netx_enable_ms(struct uart_port *port) -{ - unsigned int val; - val = readl(port->membase + UART_CR); - writel(val | CR_MSIE, port->membase + UART_CR); -} - -static inline void netx_transmit_buffer(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - - if (port->x_char) { - writel(port->x_char, port->membase + UART_DR); - port->icount.tx++; - port->x_char = 0; - return; - } - - if (uart_tx_stopped(port) || uart_circ_empty(xmit)) { - netx_stop_tx(port); - return; - } - - do { - /* send xmit->buf[xmit->tail] - * out the port here */ - writel(xmit->buf[xmit->tail], port->membase + UART_DR); - xmit->tail = (xmit->tail + 1) & - (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (!(readl(port->membase + UART_FR) & FR_TXFF)); - - if (uart_circ_empty(xmit)) - netx_stop_tx(port); -} - -static void netx_start_tx(struct uart_port *port) -{ - writel( - readl(port->membase + UART_CR) | CR_TIE, port->membase + UART_CR); - - if (!(readl(port->membase + UART_FR) & FR_TXFF)) - netx_transmit_buffer(port); -} - -static unsigned int netx_tx_empty(struct uart_port *port) -{ - return readl(port->membase + UART_FR) & FR_BUSY ? 0 : TIOCSER_TEMT; -} - -static void netx_txint(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - netx_stop_tx(port); - return; - } - - netx_transmit_buffer(port); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - -static void netx_rxint(struct uart_port *port) -{ - unsigned char rx, flg, status; - struct tty_struct *tty = port->state->port.tty; - - while (!(readl(port->membase + UART_FR) & FR_RXFE)) { - rx = readl(port->membase + UART_DR); - flg = TTY_NORMAL; - port->icount.rx++; - status = readl(port->membase + UART_SR); - if (status & SR_BE) { - writel(0, port->membase + UART_SR); - if (uart_handle_break(port)) - continue; - } - - if (unlikely(status & (SR_FE | SR_PE | SR_OE))) { - - if (status & SR_PE) - port->icount.parity++; - else if (status & SR_FE) - port->icount.frame++; - if (status & SR_OE) - port->icount.overrun++; - - status &= port->read_status_mask; - - if (status & SR_BE) - flg = TTY_BREAK; - else if (status & SR_PE) - flg = TTY_PARITY; - else if (status & SR_FE) - flg = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, rx)) - continue; - - uart_insert_char(port, status, SR_OE, rx, flg); - } - - tty_flip_buffer_push(tty); - return; -} - -static irqreturn_t netx_int(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - unsigned long flags; - unsigned char status; - - spin_lock_irqsave(&port->lock,flags); - - status = readl(port->membase + UART_IIR) & IIR_MASK; - while (status) { - if (status & IIR_RIS) - netx_rxint(port); - if (status & IIR_TIS) - netx_txint(port); - if (status & IIR_MIS) { - if (readl(port->membase + UART_FR) & FR_CTS) - uart_handle_cts_change(port, 1); - else - uart_handle_cts_change(port, 0); - } - writel(0, port->membase + UART_IIR); - status = readl(port->membase + UART_IIR) & IIR_MASK; - } - - spin_unlock_irqrestore(&port->lock,flags); - return IRQ_HANDLED; -} - -static unsigned int netx_get_mctrl(struct uart_port *port) -{ - unsigned int ret = TIOCM_DSR | TIOCM_CAR; - - if (readl(port->membase + UART_FR) & FR_CTS) - ret |= TIOCM_CTS; - - return ret; -} - -static void netx_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - unsigned int val; - - /* FIXME: Locking needed ? */ - if (mctrl & TIOCM_RTS) { - val = readl(port->membase + UART_RTS_CR); - writel(val | RTS_CR_RTS, port->membase + UART_RTS_CR); - } -} - -static void netx_break_ctl(struct uart_port *port, int break_state) -{ - unsigned int line_cr; - spin_lock_irq(&port->lock); - - line_cr = readl(port->membase + UART_LINE_CR); - if (break_state != 0) - line_cr |= LINE_CR_BRK; - else - line_cr &= ~LINE_CR_BRK; - writel(line_cr, port->membase + UART_LINE_CR); - - spin_unlock_irq(&port->lock); -} - -static int netx_startup(struct uart_port *port) -{ - int ret; - - ret = request_irq(port->irq, netx_int, 0, - DRIVER_NAME, port); - if (ret) { - dev_err(port->dev, "unable to grab irq%d\n",port->irq); - goto exit; - } - - writel(readl(port->membase + UART_LINE_CR) | LINE_CR_FEN, - port->membase + UART_LINE_CR); - - writel(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE | CR_UART_EN, - port->membase + UART_CR); - -exit: - return ret; -} - -static void netx_shutdown(struct uart_port *port) -{ - writel(0, port->membase + UART_CR) ; - - free_irq(port->irq, port); -} - -static void -netx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned int baud, quot; - unsigned char old_cr; - unsigned char line_cr = LINE_CR_FEN; - unsigned char rts_cr = 0; - - switch (termios->c_cflag & CSIZE) { - case CS5: - line_cr |= LINE_CR_5BIT; - break; - case CS6: - line_cr |= LINE_CR_6BIT; - break; - case CS7: - line_cr |= LINE_CR_7BIT; - break; - case CS8: - line_cr |= LINE_CR_8BIT; - break; - } - - if (termios->c_cflag & CSTOPB) - line_cr |= LINE_CR_STP2; - - if (termios->c_cflag & PARENB) { - line_cr |= LINE_CR_PEN; - if (!(termios->c_cflag & PARODD)) - line_cr |= LINE_CR_EPS; - } - - if (termios->c_cflag & CRTSCTS) - rts_cr = RTS_CR_AUTO | RTS_CR_CTS_CTR | RTS_CR_RTS_POL; - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = baud * 4096; - quot /= 1000; - quot *= 256; - quot /= 100000; - - spin_lock_irq(&port->lock); - - uart_update_timeout(port, termios->c_cflag, baud); - - old_cr = readl(port->membase + UART_CR); - - /* disable interrupts */ - writel(old_cr & ~(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE), - port->membase + UART_CR); - - /* drain transmitter */ - while (readl(port->membase + UART_FR) & FR_BUSY); - - /* disable UART */ - writel(old_cr & ~CR_UART_EN, port->membase + UART_CR); - - /* modem status interrupts */ - old_cr &= ~CR_MSIE; - if (UART_ENABLE_MS(port, termios->c_cflag)) - old_cr |= CR_MSIE; - - writel((quot>>8) & 0xff, port->membase + UART_BAUDDIV_MSB); - writel(quot & 0xff, port->membase + UART_BAUDDIV_LSB); - writel(line_cr, port->membase + UART_LINE_CR); - - writel(rts_cr, port->membase + UART_RTS_CR); - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= SR_PE; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= SR_BE; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= SR_PE; - } - - port->read_status_mask = 0; - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= SR_BE; - if (termios->c_iflag & INPCK) - port->read_status_mask |= SR_PE | SR_FE; - - writel(old_cr, port->membase + UART_CR); - - spin_unlock_irq(&port->lock); -} - -static const char *netx_type(struct uart_port *port) -{ - return port->type == PORT_NETX ? "NETX" : NULL; -} - -static void netx_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, UART_PORT_SIZE); -} - -static int netx_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, UART_PORT_SIZE, - DRIVER_NAME) != NULL ? 0 : -EBUSY; -} - -static void netx_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE && netx_request_port(port) == 0) - port->type = PORT_NETX; -} - -static int -netx_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_NETX) - ret = -EINVAL; - - return ret; -} - -static struct uart_ops netx_pops = { - .tx_empty = netx_tx_empty, - .set_mctrl = netx_set_mctrl, - .get_mctrl = netx_get_mctrl, - .stop_tx = netx_stop_tx, - .start_tx = netx_start_tx, - .stop_rx = netx_stop_rx, - .enable_ms = netx_enable_ms, - .break_ctl = netx_break_ctl, - .startup = netx_startup, - .shutdown = netx_shutdown, - .set_termios = netx_set_termios, - .type = netx_type, - .release_port = netx_release_port, - .request_port = netx_request_port, - .config_port = netx_config_port, - .verify_port = netx_verify_port, -}; - -static struct netx_port netx_ports[] = { - { - .port = { - .type = PORT_NETX, - .iotype = UPIO_MEM, - .membase = (char __iomem *)io_p2v(NETX_PA_UART0), - .mapbase = NETX_PA_UART0, - .irq = NETX_IRQ_UART0, - .uartclk = 100000000, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .ops = &netx_pops, - .line = 0, - }, - }, { - .port = { - .type = PORT_NETX, - .iotype = UPIO_MEM, - .membase = (char __iomem *)io_p2v(NETX_PA_UART1), - .mapbase = NETX_PA_UART1, - .irq = NETX_IRQ_UART1, - .uartclk = 100000000, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .ops = &netx_pops, - .line = 1, - }, - }, { - .port = { - .type = PORT_NETX, - .iotype = UPIO_MEM, - .membase = (char __iomem *)io_p2v(NETX_PA_UART2), - .mapbase = NETX_PA_UART2, - .irq = NETX_IRQ_UART2, - .uartclk = 100000000, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .ops = &netx_pops, - .line = 2, - }, - } -}; - -#ifdef CONFIG_SERIAL_NETX_CONSOLE - -static void netx_console_putchar(struct uart_port *port, int ch) -{ - while (readl(port->membase + UART_FR) & FR_BUSY); - writel(ch, port->membase + UART_DR); -} - -static void -netx_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_port *port = &netx_ports[co->index].port; - unsigned char cr_save; - - cr_save = readl(port->membase + UART_CR); - writel(cr_save | CR_UART_EN, port->membase + UART_CR); - - uart_console_write(port, s, count, netx_console_putchar); - - while (readl(port->membase + UART_FR) & FR_BUSY); - writel(cr_save, port->membase + UART_CR); -} - -static void __init -netx_console_get_options(struct uart_port *port, int *baud, - int *parity, int *bits, int *flow) -{ - unsigned char line_cr; - - *baud = (readl(port->membase + UART_BAUDDIV_MSB) << 8) | - readl(port->membase + UART_BAUDDIV_LSB); - *baud *= 1000; - *baud /= 4096; - *baud *= 1000; - *baud /= 256; - *baud *= 100; - - line_cr = readl(port->membase + UART_LINE_CR); - *parity = 'n'; - if (line_cr & LINE_CR_PEN) { - if (line_cr & LINE_CR_EPS) - *parity = 'e'; - else - *parity = 'o'; - } - - switch (line_cr & LINE_CR_BITS_MASK) { - case LINE_CR_8BIT: - *bits = 8; - break; - case LINE_CR_7BIT: - *bits = 7; - break; - case LINE_CR_6BIT: - *bits = 6; - break; - case LINE_CR_5BIT: - *bits = 5; - break; - } - - if (readl(port->membase + UART_RTS_CR) & RTS_CR_AUTO) - *flow = 'r'; -} - -static int __init -netx_console_setup(struct console *co, char *options) -{ - struct netx_port *sport; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index == -1 || co->index >= ARRAY_SIZE(netx_ports)) - co->index = 0; - sport = &netx_ports[co->index]; - - if (options) { - uart_parse_options(options, &baud, &parity, &bits, &flow); - } else { - /* if the UART is enabled, assume it has been correctly setup - * by the bootloader and get the options - */ - if (readl(sport->port.membase + UART_CR) & CR_UART_EN) { - netx_console_get_options(&sport->port, &baud, - &parity, &bits, &flow); - } - - } - - return uart_set_options(&sport->port, co, baud, parity, bits, flow); -} - -static struct uart_driver netx_reg; -static struct console netx_console = { - .name = "ttyNX", - .write = netx_console_write, - .device = uart_console_device, - .setup = netx_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &netx_reg, -}; - -static int __init netx_console_init(void) -{ - register_console(&netx_console); - return 0; -} -console_initcall(netx_console_init); - -#define NETX_CONSOLE &netx_console -#else -#define NETX_CONSOLE NULL -#endif - -static struct uart_driver netx_reg = { - .owner = THIS_MODULE, - .driver_name = DRIVER_NAME, - .dev_name = "ttyNX", - .major = SERIAL_NX_MAJOR, - .minor = MINOR_START, - .nr = ARRAY_SIZE(netx_ports), - .cons = NETX_CONSOLE, -}; - -static int serial_netx_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct netx_port *sport = platform_get_drvdata(pdev); - - if (sport) - uart_suspend_port(&netx_reg, &sport->port); - - return 0; -} - -static int serial_netx_resume(struct platform_device *pdev) -{ - struct netx_port *sport = platform_get_drvdata(pdev); - - if (sport) - uart_resume_port(&netx_reg, &sport->port); - - return 0; -} - -static int serial_netx_probe(struct platform_device *pdev) -{ - struct uart_port *port = &netx_ports[pdev->id].port; - - dev_info(&pdev->dev, "initialising\n"); - - port->dev = &pdev->dev; - - writel(1, port->membase + UART_RXFIFO_IRQLEVEL); - uart_add_one_port(&netx_reg, &netx_ports[pdev->id].port); - platform_set_drvdata(pdev, &netx_ports[pdev->id]); - - return 0; -} - -static int serial_netx_remove(struct platform_device *pdev) -{ - struct netx_port *sport = platform_get_drvdata(pdev); - - platform_set_drvdata(pdev, NULL); - - if (sport) - uart_remove_one_port(&netx_reg, &sport->port); - - return 0; -} - -static struct platform_driver serial_netx_driver = { - .probe = serial_netx_probe, - .remove = serial_netx_remove, - - .suspend = serial_netx_suspend, - .resume = serial_netx_resume, - - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init netx_serial_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: NetX driver\n"); - - ret = uart_register_driver(&netx_reg); - if (ret) - return ret; - - ret = platform_driver_register(&serial_netx_driver); - if (ret != 0) - uart_unregister_driver(&netx_reg); - - return 0; -} - -static void __exit netx_serial_exit(void) -{ - platform_driver_unregister(&serial_netx_driver); - uart_unregister_driver(&netx_reg); -} - -module_init(netx_serial_init); -module_exit(netx_serial_exit); - -MODULE_AUTHOR("Sascha Hauer"); -MODULE_DESCRIPTION("NetX serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c deleted file mode 100644 index de173671e3d0..000000000000 --- a/drivers/serial/nwpserial.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * Serial Port driver for a NWP uart device - * - * Copyright (C) 2008 IBM Corp., Benjamin Krill - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define NWPSERIAL_NR 2 - -#define NWPSERIAL_STATUS_RXVALID 0x1 -#define NWPSERIAL_STATUS_TXFULL 0x2 - -struct nwpserial_port { - struct uart_port port; - dcr_host_t dcr_host; - unsigned int ier; - unsigned int mcr; -}; - -static DEFINE_MUTEX(nwpserial_mutex); -static struct nwpserial_port nwpserial_ports[NWPSERIAL_NR]; - -static void wait_for_bits(struct nwpserial_port *up, int bits) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = dcr_read(up->dcr_host, UART_LSR); - - if (--tmout == 0) - break; - udelay(1); - } while ((status & bits) != bits); -} - -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE -static void nwpserial_console_putchar(struct uart_port *port, int c) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - /* check if tx buffer is full */ - wait_for_bits(up, UART_LSR_THRE); - dcr_write(up->dcr_host, UART_TX, c); - up->port.icount.tx++; -} - -static void -nwpserial_console_write(struct console *co, const char *s, unsigned int count) -{ - struct nwpserial_port *up = &nwpserial_ports[co->index]; - unsigned long flags; - int locked = 1; - - if (oops_in_progress) - locked = spin_trylock_irqsave(&up->port.lock, flags); - else - spin_lock_irqsave(&up->port.lock, flags); - - /* save and disable interrupt */ - up->ier = dcr_read(up->dcr_host, UART_IER); - dcr_write(up->dcr_host, UART_IER, up->ier & ~UART_IER_RDI); - - uart_console_write(&up->port, s, count, nwpserial_console_putchar); - - /* wait for transmitter to become empty */ - while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0) - cpu_relax(); - - /* restore interrupt state */ - dcr_write(up->dcr_host, UART_IER, up->ier); - - if (locked) - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static struct uart_driver nwpserial_reg; -static struct console nwpserial_console = { - .name = "ttySQ", - .write = nwpserial_console_write, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &nwpserial_reg, -}; -#define NWPSERIAL_CONSOLE (&nwpserial_console) -#else -#define NWPSERIAL_CONSOLE NULL -#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */ - -/**************************************************************************/ - -static int nwpserial_request_port(struct uart_port *port) -{ - return 0; -} - -static void nwpserial_release_port(struct uart_port *port) -{ - /* N/A */ -} - -static void nwpserial_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_NWPSERIAL; -} - -static irqreturn_t nwpserial_interrupt(int irq, void *dev_id) -{ - struct nwpserial_port *up = dev_id; - struct tty_struct *tty = up->port.state->port.tty; - irqreturn_t ret; - unsigned int iir; - unsigned char ch; - - spin_lock(&up->port.lock); - - /* check if the uart was the interrupt source. */ - iir = dcr_read(up->dcr_host, UART_IIR); - if (!iir) { - ret = IRQ_NONE; - goto out; - } - - do { - up->port.icount.rx++; - ch = dcr_read(up->dcr_host, UART_RX); - if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID) - tty_insert_flip_char(tty, ch, TTY_NORMAL); - } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR); - - tty_flip_buffer_push(tty); - ret = IRQ_HANDLED; - - /* clear interrupt */ - dcr_write(up->dcr_host, UART_IIR, 1); -out: - spin_unlock(&up->port.lock); - return ret; -} - -static int nwpserial_startup(struct uart_port *port) -{ - struct nwpserial_port *up; - int err; - - up = container_of(port, struct nwpserial_port, port); - - /* disable flow control by default */ - up->mcr = dcr_read(up->dcr_host, UART_MCR) & ~UART_MCR_AFE; - dcr_write(up->dcr_host, UART_MCR, up->mcr); - - /* register interrupt handler */ - err = request_irq(up->port.irq, nwpserial_interrupt, - IRQF_SHARED, "nwpserial", up); - if (err) - return err; - - /* enable interrupts */ - up->ier = UART_IER_RDI; - dcr_write(up->dcr_host, UART_IER, up->ier); - - /* enable receiving */ - up->port.ignore_status_mask &= ~NWPSERIAL_STATUS_RXVALID; - - return 0; -} - -static void nwpserial_shutdown(struct uart_port *port) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - - /* disable receiving */ - up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID; - - /* disable interrupts from this port */ - up->ier = 0; - dcr_write(up->dcr_host, UART_IER, up->ier); - - /* free irq */ - free_irq(up->port.irq, port); -} - -static int nwpserial_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - return -EINVAL; -} - -static const char *nwpserial_type(struct uart_port *port) -{ - return port->type == PORT_NWPSERIAL ? "nwpserial" : NULL; -} - -static void nwpserial_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - - up->port.read_status_mask = NWPSERIAL_STATUS_RXVALID - | NWPSERIAL_STATUS_TXFULL; - - up->port.ignore_status_mask = 0; - /* ignore all characters if CREAD is not set */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID; - - /* Copy back the old hardware settings */ - if (old) - tty_termios_copy_hw(termios, old); -} - -static void nwpserial_break_ctl(struct uart_port *port, int ctl) -{ - /* N/A */ -} - -static void nwpserial_enable_ms(struct uart_port *port) -{ - /* N/A */ -} - -static void nwpserial_stop_rx(struct uart_port *port) -{ - struct nwpserial_port *up; - up = container_of(port, struct nwpserial_port, port); - /* don't forward any more data (like !CREAD) */ - up->port.ignore_status_mask = NWPSERIAL_STATUS_RXVALID; -} - -static void nwpserial_putchar(struct nwpserial_port *up, unsigned char c) -{ - /* check if tx buffer is full */ - wait_for_bits(up, UART_LSR_THRE); - dcr_write(up->dcr_host, UART_TX, c); - up->port.icount.tx++; -} - -static void nwpserial_start_tx(struct uart_port *port) -{ - struct nwpserial_port *up; - struct circ_buf *xmit; - up = container_of(port, struct nwpserial_port, port); - xmit = &up->port.state->xmit; - - if (port->x_char) { - nwpserial_putchar(up, up->port.x_char); - port->x_char = 0; - } - - while (!(uart_circ_empty(xmit) || uart_tx_stopped(&up->port))) { - nwpserial_putchar(up, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1); - } -} - -static unsigned int nwpserial_get_mctrl(struct uart_port *port) -{ - return 0; -} - -static void nwpserial_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* N/A */ -} - -static void nwpserial_stop_tx(struct uart_port *port) -{ - /* N/A */ -} - -static unsigned int nwpserial_tx_empty(struct uart_port *port) -{ - struct nwpserial_port *up; - unsigned long flags; - int ret; - up = container_of(port, struct nwpserial_port, port); - - spin_lock_irqsave(&up->port.lock, flags); - ret = dcr_read(up->dcr_host, UART_LSR); - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret & UART_LSR_TEMT ? TIOCSER_TEMT : 0; -} - -static struct uart_ops nwpserial_pops = { - .tx_empty = nwpserial_tx_empty, - .set_mctrl = nwpserial_set_mctrl, - .get_mctrl = nwpserial_get_mctrl, - .stop_tx = nwpserial_stop_tx, - .start_tx = nwpserial_start_tx, - .stop_rx = nwpserial_stop_rx, - .enable_ms = nwpserial_enable_ms, - .break_ctl = nwpserial_break_ctl, - .startup = nwpserial_startup, - .shutdown = nwpserial_shutdown, - .set_termios = nwpserial_set_termios, - .type = nwpserial_type, - .release_port = nwpserial_release_port, - .request_port = nwpserial_request_port, - .config_port = nwpserial_config_port, - .verify_port = nwpserial_verify_port, -}; - -static struct uart_driver nwpserial_reg = { - .owner = THIS_MODULE, - .driver_name = "nwpserial", - .dev_name = "ttySQ", - .major = TTY_MAJOR, - .minor = 68, - .nr = NWPSERIAL_NR, - .cons = NWPSERIAL_CONSOLE, -}; - -int nwpserial_register_port(struct uart_port *port) -{ - struct nwpserial_port *up = NULL; - int ret = -1; - int i; - static int first = 1; - int dcr_len; - int dcr_base; - struct device_node *dn; - - mutex_lock(&nwpserial_mutex); - - dn = port->dev->of_node; - if (dn == NULL) - goto out; - - /* get dcr base. */ - dcr_base = dcr_resource_start(dn, 0); - - /* find matching entry */ - for (i = 0; i < NWPSERIAL_NR; i++) - if (nwpserial_ports[i].port.iobase == dcr_base) { - up = &nwpserial_ports[i]; - break; - } - - /* we didn't find a mtching entry, search for a free port */ - if (up == NULL) - for (i = 0; i < NWPSERIAL_NR; i++) - if (nwpserial_ports[i].port.type == PORT_UNKNOWN && - nwpserial_ports[i].port.iobase == 0) { - up = &nwpserial_ports[i]; - break; - } - - if (up == NULL) { - ret = -EBUSY; - goto out; - } - - if (first) - uart_register_driver(&nwpserial_reg); - first = 0; - - up->port.membase = port->membase; - up->port.irq = port->irq; - up->port.uartclk = port->uartclk; - up->port.fifosize = port->fifosize; - up->port.regshift = port->regshift; - up->port.iotype = port->iotype; - up->port.flags = port->flags; - up->port.mapbase = port->mapbase; - up->port.private_data = port->private_data; - - if (port->dev) - up->port.dev = port->dev; - - if (up->port.iobase != dcr_base) { - up->port.ops = &nwpserial_pops; - up->port.fifosize = 16; - - spin_lock_init(&up->port.lock); - - up->port.iobase = dcr_base; - dcr_len = dcr_resource_len(dn, 0); - - up->dcr_host = dcr_map(dn, dcr_base, dcr_len); - if (!DCR_MAP_OK(up->dcr_host)) { - printk(KERN_ERR "Cannot map DCR resources for NWPSERIAL"); - goto out; - } - } - - ret = uart_add_one_port(&nwpserial_reg, &up->port); - if (ret == 0) - ret = up->port.line; - -out: - mutex_unlock(&nwpserial_mutex); - - return ret; -} -EXPORT_SYMBOL(nwpserial_register_port); - -void nwpserial_unregister_port(int line) -{ - struct nwpserial_port *up = &nwpserial_ports[line]; - mutex_lock(&nwpserial_mutex); - uart_remove_one_port(&nwpserial_reg, &up->port); - - up->port.type = PORT_UNKNOWN; - - mutex_unlock(&nwpserial_mutex); -} -EXPORT_SYMBOL(nwpserial_unregister_port); - -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE -static int __init nwpserial_console_init(void) -{ - struct nwpserial_port *up = NULL; - struct device_node *dn; - const char *name; - int dcr_base; - int dcr_len; - int i; - - /* search for a free port */ - for (i = 0; i < NWPSERIAL_NR; i++) - if (nwpserial_ports[i].port.type == PORT_UNKNOWN) { - up = &nwpserial_ports[i]; - break; - } - - if (up == NULL) - return -1; - - name = of_get_property(of_chosen, "linux,stdout-path", NULL); - if (name == NULL) - return -1; - - dn = of_find_node_by_path(name); - if (!dn) - return -1; - - spin_lock_init(&up->port.lock); - up->port.ops = &nwpserial_pops; - up->port.type = PORT_NWPSERIAL; - up->port.fifosize = 16; - - dcr_base = dcr_resource_start(dn, 0); - dcr_len = dcr_resource_len(dn, 0); - up->port.iobase = dcr_base; - - up->dcr_host = dcr_map(dn, dcr_base, dcr_len); - if (!DCR_MAP_OK(up->dcr_host)) { - printk("Cannot map DCR resources for SERIAL"); - return -1; - } - register_console(&nwpserial_console); - return 0; -} -console_initcall(nwpserial_console_init); -#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */ diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c deleted file mode 100644 index 5c7abe4c94dd..000000000000 --- a/drivers/serial/of_serial.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Serial Port driver for Open Firmware platform devices - * - * Copyright (C) 2006 Arnd Bergmann , IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct of_serial_info { - int type; - int line; -}; - -/* - * Fill a struct uart_port for a given device node - */ -static int __devinit of_platform_serial_setup(struct platform_device *ofdev, - int type, struct uart_port *port) -{ - struct resource resource; - struct device_node *np = ofdev->dev.of_node; - const __be32 *clk, *spd; - const __be32 *prop; - int ret, prop_size; - - memset(port, 0, sizeof *port); - spd = of_get_property(np, "current-speed", NULL); - clk = of_get_property(np, "clock-frequency", NULL); - if (!clk) { - dev_warn(&ofdev->dev, "no clock-frequency property set\n"); - return -ENODEV; - } - - ret = of_address_to_resource(np, 0, &resource); - if (ret) { - dev_warn(&ofdev->dev, "invalid address\n"); - return ret; - } - - spin_lock_init(&port->lock); - port->mapbase = resource.start; - - /* Check for shifted address mapping */ - prop = of_get_property(np, "reg-offset", &prop_size); - if (prop && (prop_size == sizeof(u32))) - port->mapbase += be32_to_cpup(prop); - - /* Check for registers offset within the devices address range */ - prop = of_get_property(np, "reg-shift", &prop_size); - if (prop && (prop_size == sizeof(u32))) - port->regshift = be32_to_cpup(prop); - - port->irq = irq_of_parse_and_map(np, 0); - port->iotype = UPIO_MEM; - port->type = type; - port->uartclk = be32_to_cpup(clk); - port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP - | UPF_FIXED_PORT | UPF_FIXED_TYPE; - port->dev = &ofdev->dev; - /* If current-speed was set, then try not to change it. */ - if (spd) - port->custom_divisor = be32_to_cpup(clk) / (16 * (be32_to_cpup(spd))); - - return 0; -} - -/* - * Try to register a serial port - */ -static int __devinit of_platform_serial_probe(struct platform_device *ofdev, - const struct of_device_id *id) -{ - struct of_serial_info *info; - struct uart_port port; - int port_type; - int ret; - - if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL)) - return -EBUSY; - - info = kmalloc(sizeof(*info), GFP_KERNEL); - if (info == NULL) - return -ENOMEM; - - port_type = (unsigned long)id->data; - ret = of_platform_serial_setup(ofdev, port_type, &port); - if (ret) - goto out; - - switch (port_type) { -#ifdef CONFIG_SERIAL_8250 - case PORT_8250 ... PORT_MAX_8250: - ret = serial8250_register_port(&port); - break; -#endif -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - case PORT_NWPSERIAL: - ret = nwpserial_register_port(&port); - break; -#endif - default: - /* need to add code for these */ - case PORT_UNKNOWN: - dev_info(&ofdev->dev, "Unknown serial port found, ignored\n"); - ret = -ENODEV; - break; - } - if (ret < 0) - goto out; - - info->type = port_type; - info->line = ret; - dev_set_drvdata(&ofdev->dev, info); - return 0; -out: - kfree(info); - irq_dispose_mapping(port.irq); - return ret; -} - -/* - * Release a line - */ -static int of_platform_serial_remove(struct platform_device *ofdev) -{ - struct of_serial_info *info = dev_get_drvdata(&ofdev->dev); - switch (info->type) { -#ifdef CONFIG_SERIAL_8250 - case PORT_8250 ... PORT_MAX_8250: - serial8250_unregister_port(info->line); - break; -#endif -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - case PORT_NWPSERIAL: - nwpserial_unregister_port(info->line); - break; -#endif - default: - /* need to add code for these */ - break; - } - kfree(info); - return 0; -} - -/* - * A few common types, add more as needed. - */ -static struct of_device_id __devinitdata of_platform_serial_table[] = { - { .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, }, - { .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, }, - { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, }, - { .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, }, - { .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, }, - { .type = "serial", .compatible = "ns16850", .data = (void *)PORT_16850, }, -#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL - { .type = "serial", .compatible = "ibm,qpace-nwp-serial", - .data = (void *)PORT_NWPSERIAL, }, -#endif - { .type = "serial", .data = (void *)PORT_UNKNOWN, }, - { /* end of list */ }, -}; - -static struct of_platform_driver of_platform_serial_driver = { - .driver = { - .name = "of_serial", - .owner = THIS_MODULE, - .of_match_table = of_platform_serial_table, - }, - .probe = of_platform_serial_probe, - .remove = of_platform_serial_remove, -}; - -static int __init of_platform_serial_init(void) -{ - return of_register_platform_driver(&of_platform_serial_driver); -} -module_init(of_platform_serial_init); - -static void __exit of_platform_serial_exit(void) -{ - return of_unregister_platform_driver(&of_platform_serial_driver); -}; -module_exit(of_platform_serial_exit); - -MODULE_AUTHOR("Arnd Bergmann "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Serial Port driver for Open Firmware platform devices"); diff --git a/drivers/serial/omap-serial.c b/drivers/serial/omap-serial.c deleted file mode 100644 index 7f2f01058789..000000000000 --- a/drivers/serial/omap-serial.c +++ /dev/null @@ -1,1359 +0,0 @@ -/* - * Driver for OMAP-UART controller. - * Based on drivers/serial/8250.c - * - * Copyright (C) 2010 Texas Instruments. - * - * Authors: - * Govindraj R - * Thara Gopinath - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Note: This driver is made seperate from 8250 driver as we cannot - * over load 8250 driver with omap platform specific configuration for - * features like DMA, it makes easier to implement features like DMA and - * hardware flow control and software flow control configuration with - * this driver as required for the omap-platform. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; - -/* Forward declaration of functions */ -static void uart_tx_dma_callback(int lch, u16 ch_status, void *data); -static void serial_omap_rx_timeout(unsigned long uart_no); -static int serial_omap_start_rxdma(struct uart_omap_port *up); - -static inline unsigned int serial_in(struct uart_omap_port *up, int offset) -{ - offset <<= up->port.regshift; - return readw(up->port.membase + offset); -} - -static inline void serial_out(struct uart_omap_port *up, int offset, int value) -{ - offset <<= up->port.regshift; - writew(value, up->port.membase + offset); -} - -static inline void serial_omap_clear_fifos(struct uart_omap_port *up) -{ - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - serial_out(up, UART_FCR, 0); -} - -/* - * serial_omap_get_divisor - calculate divisor value - * @port: uart port info - * @baud: baudrate for which divisor needs to be calculated. - * - * We have written our own function to get the divisor so as to support - * 13x mode. 3Mbps Baudrate as an different divisor. - * Reference OMAP TRM Chapter 17: - * Table 17-1. UART Mode Baud Rates, Divisor Values, and Error Rates - * referring to oversampling - divisor value - * baudrate 460,800 to 3,686,400 all have divisor 13 - * except 3,000,000 which has divisor value 16 - */ -static unsigned int -serial_omap_get_divisor(struct uart_port *port, unsigned int baud) -{ - unsigned int divisor; - - if (baud > OMAP_MODE13X_SPEED && baud != 3000000) - divisor = 13; - else - divisor = 16; - return port->uartclk/(baud * divisor); -} - -static void serial_omap_stop_rxdma(struct uart_omap_port *up) -{ - if (up->uart_dma.rx_dma_used) { - del_timer(&up->uart_dma.rx_timer); - omap_stop_dma(up->uart_dma.rx_dma_channel); - omap_free_dma(up->uart_dma.rx_dma_channel); - up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; - up->uart_dma.rx_dma_used = false; - } -} - -static void serial_omap_enable_ms(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - - dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id); - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); -} - -static void serial_omap_stop_tx(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - - if (up->use_dma && - up->uart_dma.tx_dma_channel != OMAP_UART_DMA_CH_FREE) { - /* - * Check if dma is still active. If yes do nothing, - * return. Else stop dma - */ - if (omap_get_dma_active_status(up->uart_dma.tx_dma_channel)) - return; - omap_stop_dma(up->uart_dma.tx_dma_channel); - omap_free_dma(up->uart_dma.tx_dma_channel); - up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; - } - - if (up->ier & UART_IER_THRI) { - up->ier &= ~UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -static void serial_omap_stop_rx(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - - if (up->use_dma) - serial_omap_stop_rxdma(up); - up->ier &= ~UART_IER_RLSI; - up->port.read_status_mask &= ~UART_LSR_DR; - serial_out(up, UART_IER, up->ier); -} - -static inline void receive_chars(struct uart_omap_port *up, int *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned int flag; - unsigned char ch, lsr = *status; - int max_count = 256; - - do { - if (likely(lsr & UART_LSR_DR)) - ch = serial_in(up, UART_RX); - flag = TTY_NORMAL; - up->port.icount.rx++; - - if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { - /* - * For statistics only - */ - if (lsr & UART_LSR_BI) { - lsr &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (lsr & UART_LSR_PE) { - up->port.icount.parity++; - } else if (lsr & UART_LSR_FE) { - up->port.icount.frame++; - } - - if (lsr & UART_LSR_OE) - up->port.icount.overrun++; - - /* - * Mask off conditions which should be ignored. - */ - lsr &= up->port.read_status_mask; - -#ifdef CONFIG_SERIAL_OMAP_CONSOLE - if (up->port.line == up->port.cons->index) { - /* Recover the break flag from console xmit */ - lsr |= up->lsr_break_flag; - up->lsr_break_flag = 0; - } -#endif - if (lsr & UART_LSR_BI) - flag = TTY_BREAK; - else if (lsr & UART_LSR_PE) - flag = TTY_PARITY; - else if (lsr & UART_LSR_FE) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); -ignore_char: - lsr = serial_in(up, UART_LSR); - } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); - spin_unlock(&up->port.lock); - tty_flip_buffer_push(tty); - spin_lock(&up->port.lock); -} - -static void transmit_chars(struct uart_omap_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { - serial_out(up, UART_TX, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - serial_omap_stop_tx(&up->port); - return; - } - count = up->port.fifosize / 4; - do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - if (uart_circ_empty(xmit)) - serial_omap_stop_tx(&up->port); -} - -static inline void serial_omap_enable_ier_thri(struct uart_omap_port *up) -{ - if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -static void serial_omap_start_tx(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - struct circ_buf *xmit; - unsigned int start; - int ret = 0; - - if (!up->use_dma) { - serial_omap_enable_ier_thri(up); - return; - } - - if (up->uart_dma.tx_dma_used) - return; - - xmit = &up->port.state->xmit; - - if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) { - ret = omap_request_dma(up->uart_dma.uart_dma_tx, - "UART Tx DMA", - (void *)uart_tx_dma_callback, up, - &(up->uart_dma.tx_dma_channel)); - - if (ret < 0) { - serial_omap_enable_ier_thri(up); - return; - } - } - spin_lock(&(up->uart_dma.tx_lock)); - up->uart_dma.tx_dma_used = true; - spin_unlock(&(up->uart_dma.tx_lock)); - - start = up->uart_dma.tx_buf_dma_phys + - (xmit->tail & (UART_XMIT_SIZE - 1)); - - up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit); - /* - * It is a circular buffer. See if the buffer has wounded back. - * If yes it will have to be transferred in two separate dma - * transfers - */ - if (start + up->uart_dma.tx_buf_size >= - up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - up->uart_dma.tx_buf_size = - (up->uart_dma.tx_buf_dma_phys + - UART_XMIT_SIZE) - start; - - omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0, - OMAP_DMA_AMODE_CONSTANT, - up->uart_dma.uart_base, 0, 0); - omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0, - OMAP_DMA_AMODE_POST_INC, start, 0, 0); - omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel, - OMAP_DMA_DATA_TYPE_S8, - up->uart_dma.tx_buf_size, 1, - OMAP_DMA_SYNC_ELEMENT, - up->uart_dma.uart_dma_tx, 0); - /* FIXME: Cache maintenance needed here? */ - omap_start_dma(up->uart_dma.tx_dma_channel); -} - -static unsigned int check_modem_status(struct uart_omap_port *up) -{ - unsigned int status; - - status = serial_in(up, UART_MSR); - status |= up->msr_saved_flags; - up->msr_saved_flags = 0; - if ((status & UART_MSR_ANY_DELTA) == 0) - return status; - - if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && - up->port.state != NULL) { - if (status & UART_MSR_TERI) - up->port.icount.rng++; - if (status & UART_MSR_DDSR) - up->port.icount.dsr++; - if (status & UART_MSR_DDCD) - uart_handle_dcd_change - (&up->port, status & UART_MSR_DCD); - if (status & UART_MSR_DCTS) - uart_handle_cts_change - (&up->port, status & UART_MSR_CTS); - wake_up_interruptible(&up->port.state->port.delta_msr_wait); - } - - return status; -} - -/** - * serial_omap_irq() - This handles the interrupt from one port - * @irq: uart port irq number - * @dev_id: uart port info - */ -static inline irqreturn_t serial_omap_irq(int irq, void *dev_id) -{ - struct uart_omap_port *up = dev_id; - unsigned int iir, lsr; - unsigned long flags; - - iir = serial_in(up, UART_IIR); - if (iir & UART_IIR_NO_INT) - return IRQ_NONE; - - spin_lock_irqsave(&up->port.lock, flags); - lsr = serial_in(up, UART_LSR); - if (iir & UART_IIR_RLSI) { - if (!up->use_dma) { - if (lsr & UART_LSR_DR) - receive_chars(up, &lsr); - } else { - up->ier &= ~(UART_IER_RDI | UART_IER_RLSI); - serial_out(up, UART_IER, up->ier); - if ((serial_omap_start_rxdma(up) != 0) && - (lsr & UART_LSR_DR)) - receive_chars(up, &lsr); - } - } - - check_modem_status(up); - if ((lsr & UART_LSR_THRE) && (iir & UART_IIR_THRI)) - transmit_chars(up); - - spin_unlock_irqrestore(&up->port.lock, flags); - up->port_activity = jiffies; - return IRQ_HANDLED; -} - -static unsigned int serial_omap_tx_empty(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned long flags = 0; - unsigned int ret = 0; - - dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id); - spin_lock_irqsave(&up->port.lock, flags); - ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret; -} - -static unsigned int serial_omap_get_mctrl(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned char status; - unsigned int ret = 0; - - status = check_modem_status(up); - dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id); - - if (status & UART_MSR_DCD) - ret |= TIOCM_CAR; - if (status & UART_MSR_RI) - ret |= TIOCM_RNG; - if (status & UART_MSR_DSR) - ret |= TIOCM_DSR; - if (status & UART_MSR_CTS) - ret |= TIOCM_CTS; - return ret; -} - -static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned char mcr = 0; - - dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->pdev->id); - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - mcr |= up->mcr; - serial_out(up, UART_MCR, mcr); -} - -static void serial_omap_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned long flags = 0; - - dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id); - spin_lock_irqsave(&up->port.lock, flags); - if (break_state == -1) - up->lcr |= UART_LCR_SBC; - else - up->lcr &= ~UART_LCR_SBC; - serial_out(up, UART_LCR, up->lcr); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static int serial_omap_startup(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned long flags = 0; - int retval; - - /* - * Allocate the IRQ - */ - retval = request_irq(up->port.irq, serial_omap_irq, up->port.irqflags, - up->name, up); - if (retval) - return retval; - - dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id); - - /* - * Clear the FIFO buffers and disable them. - * (they will be reenabled in set_termios()) - */ - serial_omap_clear_fifos(up); - /* For Hardware flow control */ - serial_out(up, UART_MCR, UART_MCR_RTS); - - /* - * Clear the interrupt registers. - */ - (void) serial_in(up, UART_LSR); - if (serial_in(up, UART_LSR) & UART_LSR_DR) - (void) serial_in(up, UART_RX); - (void) serial_in(up, UART_IIR); - (void) serial_in(up, UART_MSR); - - /* - * Now, initialize the UART - */ - serial_out(up, UART_LCR, UART_LCR_WLEN8); - spin_lock_irqsave(&up->port.lock, flags); - /* - * Most PC uarts need OUT2 raised to enable interrupts. - */ - up->port.mctrl |= TIOCM_OUT2; - serial_omap_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - up->msr_saved_flags = 0; - if (up->use_dma) { - free_page((unsigned long)up->port.state->xmit.buf); - up->port.state->xmit.buf = dma_alloc_coherent(NULL, - UART_XMIT_SIZE, - (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys), - 0); - init_timer(&(up->uart_dma.rx_timer)); - up->uart_dma.rx_timer.function = serial_omap_rx_timeout; - up->uart_dma.rx_timer.data = up->pdev->id; - /* Currently the buffer size is 4KB. Can increase it */ - up->uart_dma.rx_buf = dma_alloc_coherent(NULL, - up->uart_dma.rx_buf_size, - (dma_addr_t *)&(up->uart_dma.rx_buf_dma_phys), 0); - } - /* - * Finally, enable interrupts. Note: Modem status interrupts - * are set via set_termios(), which will be occurring imminently - * anyway, so we don't enable them here. - */ - up->ier = UART_IER_RLSI | UART_IER_RDI; - serial_out(up, UART_IER, up->ier); - - up->port_activity = jiffies; - return 0; -} - -static void serial_omap_shutdown(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned long flags = 0; - - dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id); - /* - * Disable interrupts from this port - */ - up->ier = 0; - serial_out(up, UART_IER, 0); - - spin_lock_irqsave(&up->port.lock, flags); - up->port.mctrl &= ~TIOCM_OUT2; - serial_omap_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Disable break condition and FIFOs - */ - serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); - serial_omap_clear_fifos(up); - - /* - * Read data port to reset things, and then free the irq - */ - if (serial_in(up, UART_LSR) & UART_LSR_DR) - (void) serial_in(up, UART_RX); - if (up->use_dma) { - dma_free_coherent(up->port.dev, - UART_XMIT_SIZE, up->port.state->xmit.buf, - up->uart_dma.tx_buf_dma_phys); - up->port.state->xmit.buf = NULL; - serial_omap_stop_rx(port); - dma_free_coherent(up->port.dev, - up->uart_dma.rx_buf_size, up->uart_dma.rx_buf, - up->uart_dma.rx_buf_dma_phys); - up->uart_dma.rx_buf = NULL; - } - free_irq(up->port.irq, up); -} - -static inline void -serial_omap_configure_xonxoff - (struct uart_omap_port *up, struct ktermios *termios) -{ - unsigned char efr = 0; - - up->lcr = serial_in(up, UART_LCR); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - up->efr = serial_in(up, UART_EFR); - serial_out(up, UART_EFR, up->efr & ~UART_EFR_ECB); - - serial_out(up, UART_XON1, termios->c_cc[VSTART]); - serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]); - - /* clear SW control mode bits */ - efr = up->efr; - efr &= OMAP_UART_SW_CLR; - - /* - * IXON Flag: - * Enable XON/XOFF flow control on output. - * Transmit XON1, XOFF1 - */ - if (termios->c_iflag & IXON) - efr |= OMAP_UART_SW_TX; - - /* - * IXOFF Flag: - * Enable XON/XOFF flow control on input. - * Receiver compares XON1, XOFF1. - */ - if (termios->c_iflag & IXOFF) - efr |= OMAP_UART_SW_RX; - - serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - - up->mcr = serial_in(up, UART_MCR); - - /* - * IXANY Flag: - * Enable any character to restart output. - * Operation resumes after receiving any - * character after recognition of the XOFF character - */ - if (termios->c_iflag & IXANY) - up->mcr |= UART_MCR_XONANY; - - serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); - /* Enable special char function UARTi.EFR_REG[5] and - * load the new software flow control mode IXON or IXOFF - * and restore the UARTi.EFR_REG[4] ENHANCED_EN value. - */ - serial_out(up, UART_EFR, efr | UART_EFR_SCD); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - - serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR); - serial_out(up, UART_LCR, up->lcr); -} - -static void -serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned char cval = 0; - unsigned char efr = 0; - unsigned long flags = 0; - unsigned int baud, quot; - - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } - - if (termios->c_cflag & CSTOPB) - cval |= UART_LCR_STOP; - if (termios->c_cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(termios->c_cflag & PARODD)) - cval |= UART_LCR_EPAR; - - /* - * Ask the core to calculate the divisor for us. - */ - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13); - quot = serial_omap_get_divisor(port, baud); - - up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 | - UART_FCR_ENABLE_FIFO; - if (up->use_dma) - up->fcr |= UART_FCR_DMA_SELECT; - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (termios->c_iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (termios->c_iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; - - /* - * Characters to ignore - */ - up->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; - - /* - * Modem status interrupts - */ - up->ier &= ~UART_IER_MSI; - if (UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); - serial_out(up, UART_LCR, cval); /* reset DLAB */ - - /* FIFOs and DMA Settings */ - - /* FCR can be changed only when the - * baud clock is not running - * DLL_REG and DLH_REG set to 0. - */ - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_out(up, UART_DLL, 0); - serial_out(up, UART_DLM, 0); - serial_out(up, UART_LCR, 0); - - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - - up->efr = serial_in(up, UART_EFR); - serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); - - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - up->mcr = serial_in(up, UART_MCR); - serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); - /* FIFO ENABLE, DMA MODE */ - serial_out(up, UART_FCR, up->fcr); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - - if (up->use_dma) { - serial_out(up, UART_TI752_TLR, 0); - serial_out(up, UART_OMAP_SCR, - (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8)); - } - - serial_out(up, UART_EFR, up->efr); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_out(up, UART_MCR, up->mcr); - - /* Protocol, Baud Rate, and Interrupt Settings */ - - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - - up->efr = serial_in(up, UART_EFR); - serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); - - serial_out(up, UART_LCR, 0); - serial_out(up, UART_IER, 0); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - - serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ - serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ - - serial_out(up, UART_LCR, 0); - serial_out(up, UART_IER, up->ier); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - - serial_out(up, UART_EFR, up->efr); - serial_out(up, UART_LCR, cval); - - if (baud > 230400 && baud != 3000000) - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE); - else - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); - - /* Hardware Flow Control Configuration */ - - if (termios->c_cflag & CRTSCTS) { - efr |= (UART_EFR_CTS | UART_EFR_RTS); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - - up->mcr = serial_in(up, UART_MCR); - serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); - - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - up->efr = serial_in(up, UART_EFR); - serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); - - serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); - serial_out(up, UART_EFR, efr); /* Enable AUTORTS and AUTOCTS */ - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial_out(up, UART_MCR, up->mcr | UART_MCR_RTS); - serial_out(up, UART_LCR, cval); - } - - serial_omap_set_mctrl(&up->port, up->port.mctrl); - /* Software Flow Control Configuration */ - if (termios->c_iflag & (IXON | IXOFF)) - serial_omap_configure_xonxoff(up, termios); - - spin_unlock_irqrestore(&up->port.lock, flags); - dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id); -} - -static void -serial_omap_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned char efr; - - dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - efr = serial_in(up, UART_EFR); - serial_out(up, UART_EFR, efr | UART_EFR_ECB); - serial_out(up, UART_LCR, 0); - - serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_EFR, efr); - serial_out(up, UART_LCR, 0); - /* Enable module level wake up */ - serial_out(up, UART_OMAP_WER, - (state != 0) ? OMAP_UART_WER_MOD_WKUP : 0); -} - -static void serial_omap_release_port(struct uart_port *port) -{ - dev_dbg(port->dev, "serial_omap_release_port+\n"); -} - -static int serial_omap_request_port(struct uart_port *port) -{ - dev_dbg(port->dev, "serial_omap_request_port+\n"); - return 0; -} - -static void serial_omap_config_port(struct uart_port *port, int flags) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - - dev_dbg(up->port.dev, "serial_omap_config_port+%d\n", - up->pdev->id); - up->port.type = PORT_OMAP; -} - -static int -serial_omap_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - /* we don't want the core code to modify any port params */ - dev_dbg(port->dev, "serial_omap_verify_port+\n"); - return -EINVAL; -} - -static const char * -serial_omap_type(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - - dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->pdev->id); - return up->name; -} - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -static inline void wait_for_xmitr(struct uart_omap_port *up) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = serial_in(up, UART_LSR); - - if (status & UART_LSR_BI) - up->lsr_break_flag = UART_LSR_BI; - - if (--tmout == 0) - break; - udelay(1); - } while ((status & BOTH_EMPTY) != BOTH_EMPTY); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - for (tmout = 1000000; tmout; tmout--) { - unsigned int msr = serial_in(up, UART_MSR); - - up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; - if (msr & UART_MSR_CTS) - break; - - udelay(1); - } - } -} - -#ifdef CONFIG_CONSOLE_POLL - -static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - wait_for_xmitr(up); - serial_out(up, UART_TX, ch); -} - -static int serial_omap_poll_get_char(struct uart_port *port) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned int status = serial_in(up, UART_LSR); - - if (!(status & UART_LSR_DR)) - return NO_POLL_CHAR; - - return serial_in(up, UART_RX); -} - -#endif /* CONFIG_CONSOLE_POLL */ - -#ifdef CONFIG_SERIAL_OMAP_CONSOLE - -static struct uart_omap_port *serial_omap_console_ports[4]; - -static struct uart_driver serial_omap_reg; - -static void serial_omap_console_putchar(struct uart_port *port, int ch) -{ - struct uart_omap_port *up = (struct uart_omap_port *)port; - - wait_for_xmitr(up); - serial_out(up, UART_TX, ch); -} - -static void -serial_omap_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_omap_port *up = serial_omap_console_ports[co->index]; - unsigned long flags; - unsigned int ier; - int locked = 1; - - local_irq_save(flags); - if (up->port.sysrq) - locked = 0; - else if (oops_in_progress) - locked = spin_trylock(&up->port.lock); - else - spin_lock(&up->port.lock); - - /* - * First save the IER then disable the interrupts - */ - ier = serial_in(up, UART_IER); - serial_out(up, UART_IER, 0); - - uart_console_write(&up->port, s, count, serial_omap_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - serial_out(up, UART_IER, ier); - /* - * The receive handling will happen properly because the - * receive ready bit will still be set; it is not cleared - * on read. However, modem control will not, we must - * call it if we have saved something in the saved flags - * while processing with interrupts off. - */ - if (up->msr_saved_flags) - check_modem_status(up); - - if (locked) - spin_unlock(&up->port.lock); - local_irq_restore(flags); -} - -static int __init -serial_omap_console_setup(struct console *co, char *options) -{ - struct uart_omap_port *up; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (serial_omap_console_ports[co->index] == NULL) - return -ENODEV; - up = serial_omap_console_ports[co->index]; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&up->port, co, baud, parity, bits, flow); -} - -static struct console serial_omap_console = { - .name = OMAP_SERIAL_NAME, - .write = serial_omap_console_write, - .device = uart_console_device, - .setup = serial_omap_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &serial_omap_reg, -}; - -static void serial_omap_add_console_port(struct uart_omap_port *up) -{ - serial_omap_console_ports[up->pdev->id] = up; -} - -#define OMAP_CONSOLE (&serial_omap_console) - -#else - -#define OMAP_CONSOLE NULL - -static inline void serial_omap_add_console_port(struct uart_omap_port *up) -{} - -#endif - -static struct uart_ops serial_omap_pops = { - .tx_empty = serial_omap_tx_empty, - .set_mctrl = serial_omap_set_mctrl, - .get_mctrl = serial_omap_get_mctrl, - .stop_tx = serial_omap_stop_tx, - .start_tx = serial_omap_start_tx, - .stop_rx = serial_omap_stop_rx, - .enable_ms = serial_omap_enable_ms, - .break_ctl = serial_omap_break_ctl, - .startup = serial_omap_startup, - .shutdown = serial_omap_shutdown, - .set_termios = serial_omap_set_termios, - .pm = serial_omap_pm, - .type = serial_omap_type, - .release_port = serial_omap_release_port, - .request_port = serial_omap_request_port, - .config_port = serial_omap_config_port, - .verify_port = serial_omap_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_put_char = serial_omap_poll_put_char, - .poll_get_char = serial_omap_poll_get_char, -#endif -}; - -static struct uart_driver serial_omap_reg = { - .owner = THIS_MODULE, - .driver_name = "OMAP-SERIAL", - .dev_name = OMAP_SERIAL_NAME, - .nr = OMAP_MAX_HSUART_PORTS, - .cons = OMAP_CONSOLE, -}; - -static int -serial_omap_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct uart_omap_port *up = platform_get_drvdata(pdev); - - if (up) - uart_suspend_port(&serial_omap_reg, &up->port); - return 0; -} - -static int serial_omap_resume(struct platform_device *dev) -{ - struct uart_omap_port *up = platform_get_drvdata(dev); - - if (up) - uart_resume_port(&serial_omap_reg, &up->port); - return 0; -} - -static void serial_omap_rx_timeout(unsigned long uart_no) -{ - struct uart_omap_port *up = ui[uart_no]; - unsigned int curr_dma_pos, curr_transmitted_size; - int ret = 0; - - curr_dma_pos = omap_get_dma_dst_pos(up->uart_dma.rx_dma_channel); - if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) || - (curr_dma_pos == 0)) { - if (jiffies_to_msecs(jiffies - up->port_activity) < - RX_TIMEOUT) { - mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_timeout)); - } else { - serial_omap_stop_rxdma(up); - up->ier |= (UART_IER_RDI | UART_IER_RLSI); - serial_out(up, UART_IER, up->ier); - } - return; - } - - curr_transmitted_size = curr_dma_pos - - up->uart_dma.prev_rx_dma_pos; - up->port.icount.rx += curr_transmitted_size; - tty_insert_flip_string(up->port.state->port.tty, - up->uart_dma.rx_buf + - (up->uart_dma.prev_rx_dma_pos - - up->uart_dma.rx_buf_dma_phys), - curr_transmitted_size); - tty_flip_buffer_push(up->port.state->port.tty); - up->uart_dma.prev_rx_dma_pos = curr_dma_pos; - if (up->uart_dma.rx_buf_size + - up->uart_dma.rx_buf_dma_phys == curr_dma_pos) { - ret = serial_omap_start_rxdma(up); - if (ret < 0) { - serial_omap_stop_rxdma(up); - up->ier |= (UART_IER_RDI | UART_IER_RLSI); - serial_out(up, UART_IER, up->ier); - } - } else { - mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_timeout)); - } - up->port_activity = jiffies; -} - -static void uart_rx_dma_callback(int lch, u16 ch_status, void *data) -{ - return; -} - -static int serial_omap_start_rxdma(struct uart_omap_port *up) -{ - int ret = 0; - - if (up->uart_dma.rx_dma_channel == -1) { - ret = omap_request_dma(up->uart_dma.uart_dma_rx, - "UART Rx DMA", - (void *)uart_rx_dma_callback, up, - &(up->uart_dma.rx_dma_channel)); - if (ret < 0) - return ret; - - omap_set_dma_src_params(up->uart_dma.rx_dma_channel, 0, - OMAP_DMA_AMODE_CONSTANT, - up->uart_dma.uart_base, 0, 0); - omap_set_dma_dest_params(up->uart_dma.rx_dma_channel, 0, - OMAP_DMA_AMODE_POST_INC, - up->uart_dma.rx_buf_dma_phys, 0, 0); - omap_set_dma_transfer_params(up->uart_dma.rx_dma_channel, - OMAP_DMA_DATA_TYPE_S8, - up->uart_dma.rx_buf_size, 1, - OMAP_DMA_SYNC_ELEMENT, - up->uart_dma.uart_dma_rx, 0); - } - up->uart_dma.prev_rx_dma_pos = up->uart_dma.rx_buf_dma_phys; - /* FIXME: Cache maintenance needed here? */ - omap_start_dma(up->uart_dma.rx_dma_channel); - mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_timeout)); - up->uart_dma.rx_dma_used = true; - return ret; -} - -static void serial_omap_continue_tx(struct uart_omap_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - unsigned int start = up->uart_dma.tx_buf_dma_phys - + (xmit->tail & (UART_XMIT_SIZE - 1)); - - if (uart_circ_empty(xmit)) - return; - - up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit); - /* - * It is a circular buffer. See if the buffer has wounded back. - * If yes it will have to be transferred in two separate dma - * transfers - */ - if (start + up->uart_dma.tx_buf_size >= - up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - up->uart_dma.tx_buf_size = - (up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - start; - omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0, - OMAP_DMA_AMODE_CONSTANT, - up->uart_dma.uart_base, 0, 0); - omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0, - OMAP_DMA_AMODE_POST_INC, start, 0, 0); - omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel, - OMAP_DMA_DATA_TYPE_S8, - up->uart_dma.tx_buf_size, 1, - OMAP_DMA_SYNC_ELEMENT, - up->uart_dma.uart_dma_tx, 0); - /* FIXME: Cache maintenance needed here? */ - omap_start_dma(up->uart_dma.tx_dma_channel); -} - -static void uart_tx_dma_callback(int lch, u16 ch_status, void *data) -{ - struct uart_omap_port *up = (struct uart_omap_port *)data; - struct circ_buf *xmit = &up->port.state->xmit; - - xmit->tail = (xmit->tail + up->uart_dma.tx_buf_size) & \ - (UART_XMIT_SIZE - 1); - up->port.icount.tx += up->uart_dma.tx_buf_size; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - if (uart_circ_empty(xmit)) { - spin_lock(&(up->uart_dma.tx_lock)); - serial_omap_stop_tx(&up->port); - up->uart_dma.tx_dma_used = false; - spin_unlock(&(up->uart_dma.tx_lock)); - } else { - omap_stop_dma(up->uart_dma.tx_dma_channel); - serial_omap_continue_tx(up); - } - up->port_activity = jiffies; - return; -} - -static int serial_omap_probe(struct platform_device *pdev) -{ - struct uart_omap_port *up; - struct resource *mem, *irq, *dma_tx, *dma_rx; - struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data; - int ret = -ENOSPC; - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) { - dev_err(&pdev->dev, "no mem resource?\n"); - return -ENODEV; - } - - irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!irq) { - dev_err(&pdev->dev, "no irq resource?\n"); - return -ENODEV; - } - - if (!request_mem_region(mem->start, (mem->end - mem->start) + 1, - pdev->dev.driver->name)) { - dev_err(&pdev->dev, "memory region already claimed\n"); - return -EBUSY; - } - - dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); - if (!dma_rx) { - ret = -EINVAL; - goto err; - } - - dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); - if (!dma_tx) { - ret = -EINVAL; - goto err; - } - - up = kzalloc(sizeof(*up), GFP_KERNEL); - if (up == NULL) { - ret = -ENOMEM; - goto do_release_region; - } - sprintf(up->name, "OMAP UART%d", pdev->id); - up->pdev = pdev; - up->port.dev = &pdev->dev; - up->port.type = PORT_OMAP; - up->port.iotype = UPIO_MEM; - up->port.irq = irq->start; - - up->port.regshift = 2; - up->port.fifosize = 64; - up->port.ops = &serial_omap_pops; - up->port.line = pdev->id; - - up->port.membase = omap_up_info->membase; - up->port.mapbase = omap_up_info->mapbase; - up->port.flags = omap_up_info->flags; - up->port.irqflags = omap_up_info->irqflags; - up->port.uartclk = omap_up_info->uartclk; - up->uart_dma.uart_base = mem->start; - - if (omap_up_info->dma_enabled) { - up->uart_dma.uart_dma_tx = dma_tx->start; - up->uart_dma.uart_dma_rx = dma_rx->start; - up->use_dma = 1; - up->uart_dma.rx_buf_size = 4096; - up->uart_dma.rx_timeout = 2; - spin_lock_init(&(up->uart_dma.tx_lock)); - spin_lock_init(&(up->uart_dma.rx_lock)); - up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; - up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; - } - - ui[pdev->id] = up; - serial_omap_add_console_port(up); - - ret = uart_add_one_port(&serial_omap_reg, &up->port); - if (ret != 0) - goto do_release_region; - - platform_set_drvdata(pdev, up); - return 0; -err: - dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n", - pdev->id, __func__, ret); -do_release_region: - release_mem_region(mem->start, (mem->end - mem->start) + 1); - return ret; -} - -static int serial_omap_remove(struct platform_device *dev) -{ - struct uart_omap_port *up = platform_get_drvdata(dev); - - platform_set_drvdata(dev, NULL); - if (up) { - uart_remove_one_port(&serial_omap_reg, &up->port); - kfree(up); - } - return 0; -} - -static struct platform_driver serial_omap_driver = { - .probe = serial_omap_probe, - .remove = serial_omap_remove, - - .suspend = serial_omap_suspend, - .resume = serial_omap_resume, - .driver = { - .name = DRIVER_NAME, - }, -}; - -static int __init serial_omap_init(void) -{ - int ret; - - ret = uart_register_driver(&serial_omap_reg); - if (ret != 0) - return ret; - ret = platform_driver_register(&serial_omap_driver); - if (ret != 0) - uart_unregister_driver(&serial_omap_reg); - return ret; -} - -static void __exit serial_omap_exit(void) -{ - platform_driver_unregister(&serial_omap_driver); - uart_unregister_driver(&serial_omap_reg); -} - -module_init(serial_omap_init); -module_exit(serial_omap_exit); - -MODULE_DESCRIPTION("OMAP High Speed UART driver"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Texas Instruments Inc"); diff --git a/drivers/serial/pch_uart.c b/drivers/serial/pch_uart.c deleted file mode 100644 index 70a61458ec42..000000000000 --- a/drivers/serial/pch_uart.c +++ /dev/null @@ -1,1451 +0,0 @@ -/* - *Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. - * - *This program is free software; you can redistribute it and/or modify - *it under the terms of the GNU General Public License as published by - *the Free Software Foundation; version 2 of the License. - * - *This program is distributed in the hope that it will be useful, - *but WITHOUT ANY WARRANTY; without even the implied warranty of - *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - *GNU General Public License for more details. - * - *You should have received a copy of the GNU General Public License - *along with this program; if not, write to the Free Software - *Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - */ -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -enum { - PCH_UART_HANDLED_RX_INT_SHIFT, - PCH_UART_HANDLED_TX_INT_SHIFT, - PCH_UART_HANDLED_RX_ERR_INT_SHIFT, - PCH_UART_HANDLED_RX_TRG_INT_SHIFT, - PCH_UART_HANDLED_MS_INT_SHIFT, -}; - -enum { - PCH_UART_8LINE, - PCH_UART_2LINE, -}; - -#define PCH_UART_DRIVER_DEVICE "ttyPCH" - -#define PCH_UART_NR_GE_256FIFO 1 -#define PCH_UART_NR_GE_64FIFO 3 -#define PCH_UART_NR_GE (PCH_UART_NR_GE_256FIFO+PCH_UART_NR_GE_64FIFO) -#define PCH_UART_NR PCH_UART_NR_GE - -#define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1)) -#define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1)) -#define PCH_UART_HANDLED_RX_ERR_INT (1<<((\ - PCH_UART_HANDLED_RX_ERR_INT_SHIFT)<<1)) -#define PCH_UART_HANDLED_RX_TRG_INT (1<<((\ - PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1)) -#define PCH_UART_HANDLED_MS_INT (1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1)) - -#define PCH_UART_RBR 0x00 -#define PCH_UART_THR 0x00 - -#define PCH_UART_IER_MASK (PCH_UART_IER_ERBFI|PCH_UART_IER_ETBEI|\ - PCH_UART_IER_ELSI|PCH_UART_IER_EDSSI) -#define PCH_UART_IER_ERBFI 0x00000001 -#define PCH_UART_IER_ETBEI 0x00000002 -#define PCH_UART_IER_ELSI 0x00000004 -#define PCH_UART_IER_EDSSI 0x00000008 - -#define PCH_UART_IIR_IP 0x00000001 -#define PCH_UART_IIR_IID 0x00000006 -#define PCH_UART_IIR_MSI 0x00000000 -#define PCH_UART_IIR_TRI 0x00000002 -#define PCH_UART_IIR_RRI 0x00000004 -#define PCH_UART_IIR_REI 0x00000006 -#define PCH_UART_IIR_TOI 0x00000008 -#define PCH_UART_IIR_FIFO256 0x00000020 -#define PCH_UART_IIR_FIFO64 PCH_UART_IIR_FIFO256 -#define PCH_UART_IIR_FE 0x000000C0 - -#define PCH_UART_FCR_FIFOE 0x00000001 -#define PCH_UART_FCR_RFR 0x00000002 -#define PCH_UART_FCR_TFR 0x00000004 -#define PCH_UART_FCR_DMS 0x00000008 -#define PCH_UART_FCR_FIFO256 0x00000020 -#define PCH_UART_FCR_RFTL 0x000000C0 - -#define PCH_UART_FCR_RFTL1 0x00000000 -#define PCH_UART_FCR_RFTL64 0x00000040 -#define PCH_UART_FCR_RFTL128 0x00000080 -#define PCH_UART_FCR_RFTL224 0x000000C0 -#define PCH_UART_FCR_RFTL16 PCH_UART_FCR_RFTL64 -#define PCH_UART_FCR_RFTL32 PCH_UART_FCR_RFTL128 -#define PCH_UART_FCR_RFTL56 PCH_UART_FCR_RFTL224 -#define PCH_UART_FCR_RFTL4 PCH_UART_FCR_RFTL64 -#define PCH_UART_FCR_RFTL8 PCH_UART_FCR_RFTL128 -#define PCH_UART_FCR_RFTL14 PCH_UART_FCR_RFTL224 -#define PCH_UART_FCR_RFTL_SHIFT 6 - -#define PCH_UART_LCR_WLS 0x00000003 -#define PCH_UART_LCR_STB 0x00000004 -#define PCH_UART_LCR_PEN 0x00000008 -#define PCH_UART_LCR_EPS 0x00000010 -#define PCH_UART_LCR_SP 0x00000020 -#define PCH_UART_LCR_SB 0x00000040 -#define PCH_UART_LCR_DLAB 0x00000080 -#define PCH_UART_LCR_NP 0x00000000 -#define PCH_UART_LCR_OP PCH_UART_LCR_PEN -#define PCH_UART_LCR_EP (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS) -#define PCH_UART_LCR_1P (PCH_UART_LCR_PEN | PCH_UART_LCR_SP) -#define PCH_UART_LCR_0P (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS |\ - PCH_UART_LCR_SP) - -#define PCH_UART_LCR_5BIT 0x00000000 -#define PCH_UART_LCR_6BIT 0x00000001 -#define PCH_UART_LCR_7BIT 0x00000002 -#define PCH_UART_LCR_8BIT 0x00000003 - -#define PCH_UART_MCR_DTR 0x00000001 -#define PCH_UART_MCR_RTS 0x00000002 -#define PCH_UART_MCR_OUT 0x0000000C -#define PCH_UART_MCR_LOOP 0x00000010 -#define PCH_UART_MCR_AFE 0x00000020 - -#define PCH_UART_LSR_DR 0x00000001 -#define PCH_UART_LSR_ERR (1<<7) - -#define PCH_UART_MSR_DCTS 0x00000001 -#define PCH_UART_MSR_DDSR 0x00000002 -#define PCH_UART_MSR_TERI 0x00000004 -#define PCH_UART_MSR_DDCD 0x00000008 -#define PCH_UART_MSR_CTS 0x00000010 -#define PCH_UART_MSR_DSR 0x00000020 -#define PCH_UART_MSR_RI 0x00000040 -#define PCH_UART_MSR_DCD 0x00000080 -#define PCH_UART_MSR_DELTA (PCH_UART_MSR_DCTS | PCH_UART_MSR_DDSR |\ - PCH_UART_MSR_TERI | PCH_UART_MSR_DDCD) - -#define PCH_UART_DLL 0x00 -#define PCH_UART_DLM 0x01 - -#define DIV_ROUND(a, b) (((a) + ((b)/2)) / (b)) - -#define PCH_UART_IID_RLS (PCH_UART_IIR_REI) -#define PCH_UART_IID_RDR (PCH_UART_IIR_RRI) -#define PCH_UART_IID_RDR_TO (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI) -#define PCH_UART_IID_THRE (PCH_UART_IIR_TRI) -#define PCH_UART_IID_MS (PCH_UART_IIR_MSI) - -#define PCH_UART_HAL_PARITY_NONE (PCH_UART_LCR_NP) -#define PCH_UART_HAL_PARITY_ODD (PCH_UART_LCR_OP) -#define PCH_UART_HAL_PARITY_EVEN (PCH_UART_LCR_EP) -#define PCH_UART_HAL_PARITY_FIX1 (PCH_UART_LCR_1P) -#define PCH_UART_HAL_PARITY_FIX0 (PCH_UART_LCR_0P) -#define PCH_UART_HAL_5BIT (PCH_UART_LCR_5BIT) -#define PCH_UART_HAL_6BIT (PCH_UART_LCR_6BIT) -#define PCH_UART_HAL_7BIT (PCH_UART_LCR_7BIT) -#define PCH_UART_HAL_8BIT (PCH_UART_LCR_8BIT) -#define PCH_UART_HAL_STB1 0 -#define PCH_UART_HAL_STB2 (PCH_UART_LCR_STB) - -#define PCH_UART_HAL_CLR_TX_FIFO (PCH_UART_FCR_TFR) -#define PCH_UART_HAL_CLR_RX_FIFO (PCH_UART_FCR_RFR) -#define PCH_UART_HAL_CLR_ALL_FIFO (PCH_UART_HAL_CLR_TX_FIFO | \ - PCH_UART_HAL_CLR_RX_FIFO) - -#define PCH_UART_HAL_DMA_MODE0 0 -#define PCH_UART_HAL_FIFO_DIS 0 -#define PCH_UART_HAL_FIFO16 (PCH_UART_FCR_FIFOE) -#define PCH_UART_HAL_FIFO256 (PCH_UART_FCR_FIFOE | \ - PCH_UART_FCR_FIFO256) -#define PCH_UART_HAL_FIFO64 (PCH_UART_HAL_FIFO256) -#define PCH_UART_HAL_TRIGGER1 (PCH_UART_FCR_RFTL1) -#define PCH_UART_HAL_TRIGGER64 (PCH_UART_FCR_RFTL64) -#define PCH_UART_HAL_TRIGGER128 (PCH_UART_FCR_RFTL128) -#define PCH_UART_HAL_TRIGGER224 (PCH_UART_FCR_RFTL224) -#define PCH_UART_HAL_TRIGGER16 (PCH_UART_FCR_RFTL16) -#define PCH_UART_HAL_TRIGGER32 (PCH_UART_FCR_RFTL32) -#define PCH_UART_HAL_TRIGGER56 (PCH_UART_FCR_RFTL56) -#define PCH_UART_HAL_TRIGGER4 (PCH_UART_FCR_RFTL4) -#define PCH_UART_HAL_TRIGGER8 (PCH_UART_FCR_RFTL8) -#define PCH_UART_HAL_TRIGGER14 (PCH_UART_FCR_RFTL14) -#define PCH_UART_HAL_TRIGGER_L (PCH_UART_FCR_RFTL64) -#define PCH_UART_HAL_TRIGGER_M (PCH_UART_FCR_RFTL128) -#define PCH_UART_HAL_TRIGGER_H (PCH_UART_FCR_RFTL224) - -#define PCH_UART_HAL_RX_INT (PCH_UART_IER_ERBFI) -#define PCH_UART_HAL_TX_INT (PCH_UART_IER_ETBEI) -#define PCH_UART_HAL_RX_ERR_INT (PCH_UART_IER_ELSI) -#define PCH_UART_HAL_MS_INT (PCH_UART_IER_EDSSI) -#define PCH_UART_HAL_ALL_INT (PCH_UART_IER_MASK) - -#define PCH_UART_HAL_DTR (PCH_UART_MCR_DTR) -#define PCH_UART_HAL_RTS (PCH_UART_MCR_RTS) -#define PCH_UART_HAL_OUT (PCH_UART_MCR_OUT) -#define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP) -#define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE) - -struct pch_uart_buffer { - unsigned char *buf; - int size; -}; - -struct eg20t_port { - struct uart_port port; - int port_type; - void __iomem *membase; - resource_size_t mapbase; - unsigned int iobase; - struct pci_dev *pdev; - int fifo_size; - int base_baud; - int start_tx; - int start_rx; - int tx_empty; - int int_dis_flag; - int trigger; - int trigger_level; - struct pch_uart_buffer rxbuf; - unsigned int dmsr; - unsigned int fcr; - unsigned int use_dma; - unsigned int use_dma_flag; - struct dma_async_tx_descriptor *desc_tx; - struct dma_async_tx_descriptor *desc_rx; - struct pch_dma_slave param_tx; - struct pch_dma_slave param_rx; - struct dma_chan *chan_tx; - struct dma_chan *chan_rx; - struct scatterlist sg_tx; - struct scatterlist sg_rx; - int tx_dma_use; - void *rx_buf_virt; - dma_addr_t rx_buf_dma; -}; - -static unsigned int default_baud = 9600; -static const int trigger_level_256[4] = { 1, 64, 128, 224 }; -static const int trigger_level_64[4] = { 1, 16, 32, 56 }; -static const int trigger_level_16[4] = { 1, 4, 8, 14 }; -static const int trigger_level_1[4] = { 1, 1, 1, 1 }; - -static void pch_uart_hal_request(struct pci_dev *pdev, int fifosize, - int base_baud) -{ - struct eg20t_port *priv = pci_get_drvdata(pdev); - - priv->trigger_level = 1; - priv->fcr = 0; -} - -static unsigned int get_msr(struct eg20t_port *priv, void __iomem *base) -{ - unsigned int msr = ioread8(base + UART_MSR); - priv->dmsr |= msr & PCH_UART_MSR_DELTA; - - return msr; -} - -static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv, - unsigned int flag) -{ - u8 ier = ioread8(priv->membase + UART_IER); - ier |= flag & PCH_UART_IER_MASK; - iowrite8(ier, priv->membase + UART_IER); -} - -static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv, - unsigned int flag) -{ - u8 ier = ioread8(priv->membase + UART_IER); - ier &= ~(flag & PCH_UART_IER_MASK); - iowrite8(ier, priv->membase + UART_IER); -} - -static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, - unsigned int parity, unsigned int bits, - unsigned int stb) -{ - unsigned int dll, dlm, lcr; - int div; - - div = DIV_ROUND(priv->base_baud / 16, baud); - if (div < 0 || USHRT_MAX <= div) { - pr_err("Invalid Baud(div=0x%x)\n", div); - return -EINVAL; - } - - dll = (unsigned int)div & 0x00FFU; - dlm = ((unsigned int)div >> 8) & 0x00FFU; - - if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) { - pr_err("Invalid parity(0x%x)\n", parity); - return -EINVAL; - } - - if (bits & ~PCH_UART_LCR_WLS) { - pr_err("Invalid bits(0x%x)\n", bits); - return -EINVAL; - } - - if (stb & ~PCH_UART_LCR_STB) { - pr_err("Invalid STB(0x%x)\n", stb); - return -EINVAL; - } - - lcr = parity; - lcr |= bits; - lcr |= stb; - - pr_debug("%s:baud = %d, div = %04x, lcr = %02x (%lu)\n", - __func__, baud, div, lcr, jiffies); - iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR); - iowrite8(dll, priv->membase + PCH_UART_DLL); - iowrite8(dlm, priv->membase + PCH_UART_DLM); - iowrite8(lcr, priv->membase + UART_LCR); - - return 0; -} - -static int pch_uart_hal_fifo_reset(struct eg20t_port *priv, - unsigned int flag) -{ - if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) { - pr_err("%s:Invalid flag(0x%x)\n", __func__, flag); - return -EINVAL; - } - - iowrite8(PCH_UART_FCR_FIFOE | priv->fcr, priv->membase + UART_FCR); - iowrite8(PCH_UART_FCR_FIFOE | priv->fcr | flag, - priv->membase + UART_FCR); - iowrite8(priv->fcr, priv->membase + UART_FCR); - - return 0; -} - -static int pch_uart_hal_set_fifo(struct eg20t_port *priv, - unsigned int dmamode, - unsigned int fifo_size, unsigned int trigger) -{ - u8 fcr; - - if (dmamode & ~PCH_UART_FCR_DMS) { - pr_err("%s:Invalid DMA Mode(0x%x)\n", __func__, dmamode); - return -EINVAL; - } - - if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) { - pr_err("%s:Invalid FIFO SIZE(0x%x)\n", __func__, fifo_size); - return -EINVAL; - } - - if (trigger & ~PCH_UART_FCR_RFTL) { - pr_err("%s:Invalid TRIGGER(0x%x)\n", __func__, trigger); - return -EINVAL; - } - - switch (priv->fifo_size) { - case 256: - priv->trigger_level = - trigger_level_256[trigger >> PCH_UART_FCR_RFTL_SHIFT]; - break; - case 64: - priv->trigger_level = - trigger_level_64[trigger >> PCH_UART_FCR_RFTL_SHIFT]; - break; - case 16: - priv->trigger_level = - trigger_level_16[trigger >> PCH_UART_FCR_RFTL_SHIFT]; - break; - default: - priv->trigger_level = - trigger_level_1[trigger >> PCH_UART_FCR_RFTL_SHIFT]; - break; - } - fcr = - dmamode | fifo_size | trigger | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR; - iowrite8(PCH_UART_FCR_FIFOE, priv->membase + UART_FCR); - iowrite8(PCH_UART_FCR_FIFOE | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR, - priv->membase + UART_FCR); - iowrite8(fcr, priv->membase + UART_FCR); - priv->fcr = fcr; - - return 0; -} - -static u8 pch_uart_hal_get_modem(struct eg20t_port *priv) -{ - priv->dmsr = 0; - return get_msr(priv, priv->membase); -} - -static int pch_uart_hal_write(struct eg20t_port *priv, - const unsigned char *buf, int tx_size) -{ - int i; - unsigned int thr; - - for (i = 0; i < tx_size;) { - thr = buf[i++]; - iowrite8(thr, priv->membase + PCH_UART_THR); - } - return i; -} - -static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf, - int rx_size) -{ - int i; - u8 rbr, lsr; - - lsr = ioread8(priv->membase + UART_LSR); - for (i = 0, lsr = ioread8(priv->membase + UART_LSR); - i < rx_size && lsr & UART_LSR_DR; - lsr = ioread8(priv->membase + UART_LSR)) { - rbr = ioread8(priv->membase + PCH_UART_RBR); - buf[i++] = rbr; - } - return i; -} - -static unsigned int pch_uart_hal_get_iid(struct eg20t_port *priv) -{ - unsigned int iir; - int ret; - - iir = ioread8(priv->membase + UART_IIR); - ret = (iir & (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP)); - return ret; -} - -static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv) -{ - return ioread8(priv->membase + UART_LSR); -} - -static void pch_uart_hal_set_break(struct eg20t_port *priv, int on) -{ - unsigned int lcr; - - lcr = ioread8(priv->membase + UART_LCR); - if (on) - lcr |= PCH_UART_LCR_SB; - else - lcr &= ~PCH_UART_LCR_SB; - - iowrite8(lcr, priv->membase + UART_LCR); -} - -static int push_rx(struct eg20t_port *priv, const unsigned char *buf, - int size) -{ - struct uart_port *port; - struct tty_struct *tty; - - port = &priv->port; - tty = tty_port_tty_get(&port->state->port); - if (!tty) { - pr_debug("%s:tty is busy now", __func__); - return -EBUSY; - } - - tty_insert_flip_string(tty, buf, size); - tty_flip_buffer_push(tty); - tty_kref_put(tty); - - return 0; -} - -static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf) -{ - int ret; - struct uart_port *port = &priv->port; - - if (port->x_char) { - pr_debug("%s:X character send %02x (%lu)\n", __func__, - port->x_char, jiffies); - buf[0] = port->x_char; - port->x_char = 0; - ret = 1; - } else { - ret = 0; - } - - return ret; -} - -static int dma_push_rx(struct eg20t_port *priv, int size) -{ - struct tty_struct *tty; - int room; - struct uart_port *port = &priv->port; - - port = &priv->port; - tty = tty_port_tty_get(&port->state->port); - if (!tty) { - pr_debug("%s:tty is busy now", __func__); - return 0; - } - - room = tty_buffer_request_room(tty, size); - - if (room < size) - dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", - size - room); - if (!room) - return room; - - tty_insert_flip_string(tty, sg_virt(&priv->sg_rx), size); - - port->icount.rx += room; - tty_kref_put(tty); - - return room; -} - -static void pch_free_dma(struct uart_port *port) -{ - struct eg20t_port *priv; - priv = container_of(port, struct eg20t_port, port); - - if (priv->chan_tx) { - dma_release_channel(priv->chan_tx); - priv->chan_tx = NULL; - } - if (priv->chan_rx) { - dma_release_channel(priv->chan_rx); - priv->chan_rx = NULL; - } - if (sg_dma_address(&priv->sg_rx)) - dma_free_coherent(port->dev, port->fifosize, - sg_virt(&priv->sg_rx), - sg_dma_address(&priv->sg_rx)); - - return; -} - -static bool filter(struct dma_chan *chan, void *slave) -{ - struct pch_dma_slave *param = slave; - - if ((chan->chan_id == param->chan_id) && (param->dma_dev == - chan->device->dev)) { - chan->private = param; - return true; - } else { - return false; - } -} - -static void pch_request_dma(struct uart_port *port) -{ - dma_cap_mask_t mask; - struct dma_chan *chan; - struct pci_dev *dma_dev; - struct pch_dma_slave *param; - struct eg20t_port *priv = - container_of(port, struct eg20t_port, port); - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(0xa, 0)); /* Get DMA's dev - information */ - /* Set Tx DMA */ - param = &priv->param_tx; - param->dma_dev = &dma_dev->dev; - param->chan_id = priv->port.line; - param->tx_reg = port->mapbase + UART_TX; - chan = dma_request_channel(mask, filter, param); - if (!chan) { - pr_err("%s:dma_request_channel FAILS(Tx)\n", __func__); - return; - } - priv->chan_tx = chan; - - /* Set Rx DMA */ - param = &priv->param_rx; - param->dma_dev = &dma_dev->dev; - param->chan_id = priv->port.line + 1; /* Rx = Tx + 1 */ - param->rx_reg = port->mapbase + UART_RX; - chan = dma_request_channel(mask, filter, param); - if (!chan) { - pr_err("%s:dma_request_channel FAILS(Rx)\n", __func__); - dma_release_channel(priv->chan_tx); - return; - } - - /* Get Consistent memory for DMA */ - priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize, - &priv->rx_buf_dma, GFP_KERNEL); - priv->chan_rx = chan; -} - -static void pch_dma_rx_complete(void *arg) -{ - struct eg20t_port *priv = arg; - struct uart_port *port = &priv->port; - struct tty_struct *tty = tty_port_tty_get(&port->state->port); - - if (!tty) { - pr_debug("%s:tty is busy now", __func__); - return; - } - - if (dma_push_rx(priv, priv->trigger_level)) - tty_flip_buffer_push(tty); - - tty_kref_put(tty); -} - -static void pch_dma_tx_complete(void *arg) -{ - struct eg20t_port *priv = arg; - struct uart_port *port = &priv->port; - struct circ_buf *xmit = &port->state->xmit; - - xmit->tail += sg_dma_len(&priv->sg_tx); - xmit->tail &= UART_XMIT_SIZE - 1; - port->icount.tx += sg_dma_len(&priv->sg_tx); - - async_tx_ack(priv->desc_tx); - priv->tx_dma_use = 0; -} - -static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size) -{ - int count = 0; - struct uart_port *port = &priv->port; - struct circ_buf *xmit = &port->state->xmit; - - if (uart_tx_stopped(port) || uart_circ_empty(xmit) || count >= size) - goto pop_tx_end; - - do { - int cnt_to_end = - CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); - int sz = min(size - count, cnt_to_end); - memcpy(&buf[count], &xmit->buf[xmit->tail], sz); - xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1); - count += sz; - } while (!uart_circ_empty(xmit) && count < size); - -pop_tx_end: - pr_debug("%d characters. Remained %d characters. (%lu)\n", - count, size - count, jiffies); - - return count; -} - -static int handle_rx_to(struct eg20t_port *priv) -{ - struct pch_uart_buffer *buf; - int rx_size; - int ret; - if (!priv->start_rx) { - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT); - return 0; - } - buf = &priv->rxbuf; - do { - rx_size = pch_uart_hal_read(priv, buf->buf, buf->size); - ret = push_rx(priv, buf->buf, rx_size); - if (ret) - return 0; - } while (rx_size == buf->size); - - return PCH_UART_HANDLED_RX_INT; -} - -static int handle_rx(struct eg20t_port *priv) -{ - return handle_rx_to(priv); -} - -static int dma_handle_rx(struct eg20t_port *priv) -{ - struct uart_port *port = &priv->port; - struct dma_async_tx_descriptor *desc; - struct scatterlist *sg; - - priv = container_of(port, struct eg20t_port, port); - sg = &priv->sg_rx; - - sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */ - - sg_dma_len(sg) = priv->fifo_size; - - sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt), - sg_dma_len(sg), (unsigned long)priv->rx_buf_virt & - ~PAGE_MASK); - - sg_dma_address(sg) = priv->rx_buf_dma; - - desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx, - sg, 1, DMA_FROM_DEVICE, - DMA_PREP_INTERRUPT); - if (!desc) - return 0; - - priv->desc_rx = desc; - desc->callback = pch_dma_rx_complete; - desc->callback_param = priv; - desc->tx_submit(desc); - dma_async_issue_pending(priv->chan_rx); - - return PCH_UART_HANDLED_RX_INT; -} - -static unsigned int handle_tx(struct eg20t_port *priv) -{ - struct uart_port *port = &priv->port; - struct circ_buf *xmit = &port->state->xmit; - int ret; - int fifo_size; - int tx_size; - int size; - int tx_empty; - - if (!priv->start_tx) { - pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies); - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); - priv->tx_empty = 1; - return 0; - } - - fifo_size = max(priv->fifo_size, 1); - tx_empty = 1; - if (pop_tx_x(priv, xmit->buf)) { - pch_uart_hal_write(priv, xmit->buf, 1); - port->icount.tx++; - tx_empty = 0; - fifo_size--; - } - size = min(xmit->head - xmit->tail, fifo_size); - tx_size = pop_tx(priv, xmit->buf, size); - if (tx_size > 0) { - ret = pch_uart_hal_write(priv, xmit->buf, tx_size); - port->icount.tx += ret; - tx_empty = 0; - } - - priv->tx_empty = tx_empty; - - if (tx_empty) - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); - - return PCH_UART_HANDLED_TX_INT; -} - -static unsigned int dma_handle_tx(struct eg20t_port *priv) -{ - struct uart_port *port = &priv->port; - struct circ_buf *xmit = &port->state->xmit; - struct scatterlist *sg = &priv->sg_tx; - int nent; - int fifo_size; - int tx_empty; - struct dma_async_tx_descriptor *desc; - - if (!priv->start_tx) { - pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies); - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); - priv->tx_empty = 1; - return 0; - } - - fifo_size = max(priv->fifo_size, 1); - tx_empty = 1; - if (pop_tx_x(priv, xmit->buf)) { - pch_uart_hal_write(priv, xmit->buf, 1); - port->icount.tx++; - tx_empty = 0; - fifo_size--; - } - - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); - - priv->tx_dma_use = 1; - - sg_init_table(&priv->sg_tx, 1); /* Initialize SG table */ - - sg_set_page(&priv->sg_tx, virt_to_page(xmit->buf), - UART_XMIT_SIZE, (int)xmit->buf & ~PAGE_MASK); - - nent = dma_map_sg(port->dev, &priv->sg_tx, 1, DMA_TO_DEVICE); - if (!nent) { - pr_err("%s:dma_map_sg Failed\n", __func__); - return 0; - } - - sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); - sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + - sg->offset; - sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, - UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, - xmit->tail, UART_XMIT_SIZE)); - - desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx, - sg, nent, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - pr_err("%s:device_prep_slave_sg Failed\n", __func__); - return 0; - } - - dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); - - priv->desc_tx = desc; - desc->callback = pch_dma_tx_complete; - desc->callback_param = priv; - - desc->tx_submit(desc); - - dma_async_issue_pending(priv->chan_tx); - - return PCH_UART_HANDLED_TX_INT; -} - -static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr) -{ - u8 fcr = ioread8(priv->membase + UART_FCR); - - /* Reset FIFO */ - fcr |= UART_FCR_CLEAR_RCVR; - iowrite8(fcr, priv->membase + UART_FCR); - - if (lsr & PCH_UART_LSR_ERR) - dev_err(&priv->pdev->dev, "Error data in FIFO\n"); - - if (lsr & UART_LSR_FE) - dev_err(&priv->pdev->dev, "Framing Error\n"); - - if (lsr & UART_LSR_PE) - dev_err(&priv->pdev->dev, "Parity Error\n"); - - if (lsr & UART_LSR_OE) - dev_err(&priv->pdev->dev, "Overrun Error\n"); -} - -static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) -{ - struct eg20t_port *priv = dev_id; - unsigned int handled; - u8 lsr; - int ret = 0; - unsigned int iid; - unsigned long flags; - - spin_lock_irqsave(&priv->port.lock, flags); - handled = 0; - while ((iid = pch_uart_hal_get_iid(priv)) > 1) { - switch (iid) { - case PCH_UART_IID_RLS: /* Receiver Line Status */ - lsr = pch_uart_hal_get_line_status(priv); - if (lsr & (PCH_UART_LSR_ERR | UART_LSR_FE | - UART_LSR_PE | UART_LSR_OE)) { - pch_uart_err_ir(priv, lsr); - ret = PCH_UART_HANDLED_RX_ERR_INT; - } - break; - case PCH_UART_IID_RDR: /* Received Data Ready */ - if (priv->use_dma) - ret = dma_handle_rx(priv); - else - ret = handle_rx(priv); - break; - case PCH_UART_IID_RDR_TO: /* Received Data Ready - (FIFO Timeout) */ - ret = handle_rx_to(priv); - break; - case PCH_UART_IID_THRE: /* Transmitter Holding Register - Empty */ - if (priv->use_dma) - ret = dma_handle_tx(priv); - else - ret = handle_tx(priv); - break; - case PCH_UART_IID_MS: /* Modem Status */ - ret = PCH_UART_HANDLED_MS_INT; - break; - default: /* Never junp to this label */ - pr_err("%s:iid=%d (%lu)\n", __func__, iid, jiffies); - ret = -1; - break; - } - handled |= (unsigned int)ret; - } - if (handled == 0 && iid <= 1) { - if (priv->int_dis_flag) - priv->int_dis_flag = 0; - } - - spin_unlock_irqrestore(&priv->port.lock, flags); - return IRQ_RETVAL(handled); -} - -/* This function tests whether the transmitter fifo and shifter for the port - described by 'port' is empty. */ -static unsigned int pch_uart_tx_empty(struct uart_port *port) -{ - struct eg20t_port *priv; - int ret; - priv = container_of(port, struct eg20t_port, port); - if (priv->tx_empty) - ret = TIOCSER_TEMT; - else - ret = 0; - - return ret; -} - -/* Returns the current state of modem control inputs. */ -static unsigned int pch_uart_get_mctrl(struct uart_port *port) -{ - struct eg20t_port *priv; - u8 modem; - unsigned int ret = 0; - - priv = container_of(port, struct eg20t_port, port); - modem = pch_uart_hal_get_modem(priv); - - if (modem & UART_MSR_DCD) - ret |= TIOCM_CAR; - - if (modem & UART_MSR_RI) - ret |= TIOCM_RNG; - - if (modem & UART_MSR_DSR) - ret |= TIOCM_DSR; - - if (modem & UART_MSR_CTS) - ret |= TIOCM_CTS; - - return ret; -} - -static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - u32 mcr = 0; - unsigned int dat; - struct eg20t_port *priv = container_of(port, struct eg20t_port, port); - - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - if (mctrl) { - dat = pch_uart_get_mctrl(port); - dat |= mcr; - iowrite8(dat, priv->membase + UART_MCR); - } -} - -static void pch_uart_stop_tx(struct uart_port *port) -{ - struct eg20t_port *priv; - priv = container_of(port, struct eg20t_port, port); - priv->start_tx = 0; - priv->tx_dma_use = 0; -} - -static void pch_uart_start_tx(struct uart_port *port) -{ - struct eg20t_port *priv; - - priv = container_of(port, struct eg20t_port, port); - - if (priv->use_dma) - if (priv->tx_dma_use) - return; - - priv->start_tx = 1; - pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); -} - -static void pch_uart_stop_rx(struct uart_port *port) -{ - struct eg20t_port *priv; - priv = container_of(port, struct eg20t_port, port); - priv->start_rx = 0; - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT); - priv->int_dis_flag = 1; -} - -/* Enable the modem status interrupts. */ -static void pch_uart_enable_ms(struct uart_port *port) -{ - struct eg20t_port *priv; - priv = container_of(port, struct eg20t_port, port); - pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_MS_INT); -} - -/* Control the transmission of a break signal. */ -static void pch_uart_break_ctl(struct uart_port *port, int ctl) -{ - struct eg20t_port *priv; - unsigned long flags; - - priv = container_of(port, struct eg20t_port, port); - spin_lock_irqsave(&port->lock, flags); - pch_uart_hal_set_break(priv, ctl); - spin_unlock_irqrestore(&port->lock, flags); -} - -/* Grab any interrupt resources and initialise any low level driver state. */ -static int pch_uart_startup(struct uart_port *port) -{ - struct eg20t_port *priv; - int ret; - int fifo_size; - int trigger_level; - - priv = container_of(port, struct eg20t_port, port); - priv->tx_empty = 1; - port->uartclk = priv->base_baud; - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); - ret = pch_uart_hal_set_line(priv, default_baud, - PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT, - PCH_UART_HAL_STB1); - if (ret) - return ret; - - switch (priv->fifo_size) { - case 256: - fifo_size = PCH_UART_HAL_FIFO256; - break; - case 64: - fifo_size = PCH_UART_HAL_FIFO64; - break; - case 16: - fifo_size = PCH_UART_HAL_FIFO16; - case 1: - default: - fifo_size = PCH_UART_HAL_FIFO_DIS; - break; - } - - switch (priv->trigger) { - case PCH_UART_HAL_TRIGGER1: - trigger_level = 1; - break; - case PCH_UART_HAL_TRIGGER_L: - trigger_level = priv->fifo_size / 4; - break; - case PCH_UART_HAL_TRIGGER_M: - trigger_level = priv->fifo_size / 2; - break; - case PCH_UART_HAL_TRIGGER_H: - default: - trigger_level = priv->fifo_size - (priv->fifo_size / 8); - break; - } - - priv->trigger_level = trigger_level; - ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0, - fifo_size, priv->trigger); - if (ret < 0) - return ret; - - ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED, - KBUILD_MODNAME, priv); - if (ret < 0) - return ret; - - if (priv->use_dma) - pch_request_dma(port); - - priv->start_rx = 1; - pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT); - uart_update_timeout(port, CS8, default_baud); - - return 0; -} - -static void pch_uart_shutdown(struct uart_port *port) -{ - struct eg20t_port *priv; - int ret; - - priv = container_of(port, struct eg20t_port, port); - pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); - pch_uart_hal_fifo_reset(priv, PCH_UART_HAL_CLR_ALL_FIFO); - ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0, - PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1); - if (ret) - pr_err("pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); - - if (priv->use_dma_flag) - pch_free_dma(port); - - free_irq(priv->port.irq, priv); -} - -/* Change the port parameters, including word length, parity, stop - *bits. Update read_status_mask and ignore_status_mask to indicate - *the types of events we are interested in receiving. */ -static void pch_uart_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - int baud; - int rtn; - unsigned int parity, bits, stb; - struct eg20t_port *priv; - unsigned long flags; - - priv = container_of(port, struct eg20t_port, port); - switch (termios->c_cflag & CSIZE) { - case CS5: - bits = PCH_UART_HAL_5BIT; - break; - case CS6: - bits = PCH_UART_HAL_6BIT; - break; - case CS7: - bits = PCH_UART_HAL_7BIT; - break; - default: /* CS8 */ - bits = PCH_UART_HAL_8BIT; - break; - } - if (termios->c_cflag & CSTOPB) - stb = PCH_UART_HAL_STB2; - else - stb = PCH_UART_HAL_STB1; - - if (termios->c_cflag & PARENB) { - if (!(termios->c_cflag & PARODD)) - parity = PCH_UART_HAL_PARITY_ODD; - else - parity = PCH_UART_HAL_PARITY_EVEN; - - } else { - parity = PCH_UART_HAL_PARITY_NONE; - } - termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); - - spin_lock_irqsave(&port->lock, flags); - - uart_update_timeout(port, termios->c_cflag, baud); - rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb); - if (rtn) - goto out; - - /* Don't rewrite B0 */ - if (tty_termios_baud_rate(termios)) - tty_termios_encode_baud_rate(termios, baud, baud); - -out: - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *pch_uart_type(struct uart_port *port) -{ - return KBUILD_MODNAME; -} - -static void pch_uart_release_port(struct uart_port *port) -{ - struct eg20t_port *priv; - - priv = container_of(port, struct eg20t_port, port); - pci_iounmap(priv->pdev, priv->membase); - pci_release_regions(priv->pdev); -} - -static int pch_uart_request_port(struct uart_port *port) -{ - struct eg20t_port *priv; - int ret; - void __iomem *membase; - - priv = container_of(port, struct eg20t_port, port); - ret = pci_request_regions(priv->pdev, KBUILD_MODNAME); - if (ret < 0) - return -EBUSY; - - membase = pci_iomap(priv->pdev, 1, 0); - if (!membase) { - pci_release_regions(priv->pdev); - return -EBUSY; - } - priv->membase = port->membase = membase; - - return 0; -} - -static void pch_uart_config_port(struct uart_port *port, int type) -{ - struct eg20t_port *priv; - - priv = container_of(port, struct eg20t_port, port); - if (type & UART_CONFIG_TYPE) { - port->type = priv->port_type; - pch_uart_request_port(port); - } -} - -static int pch_uart_verify_port(struct uart_port *port, - struct serial_struct *serinfo) -{ - struct eg20t_port *priv; - - priv = container_of(port, struct eg20t_port, port); - if (serinfo->flags & UPF_LOW_LATENCY) { - pr_info("PCH UART : Use PIO Mode (without DMA)\n"); - priv->use_dma = 0; - serinfo->flags &= ~UPF_LOW_LATENCY; - } else { -#ifndef CONFIG_PCH_DMA - pr_err("%s : PCH DMA is not Loaded.\n", __func__); - return -EOPNOTSUPP; -#endif - priv->use_dma = 1; - priv->use_dma_flag = 1; - pr_info("PCH UART : Use DMA Mode\n"); - } - - return 0; -} - -static struct uart_ops pch_uart_ops = { - .tx_empty = pch_uart_tx_empty, - .set_mctrl = pch_uart_set_mctrl, - .get_mctrl = pch_uart_get_mctrl, - .stop_tx = pch_uart_stop_tx, - .start_tx = pch_uart_start_tx, - .stop_rx = pch_uart_stop_rx, - .enable_ms = pch_uart_enable_ms, - .break_ctl = pch_uart_break_ctl, - .startup = pch_uart_startup, - .shutdown = pch_uart_shutdown, - .set_termios = pch_uart_set_termios, -/* .pm = pch_uart_pm, Not supported yet */ -/* .set_wake = pch_uart_set_wake, Not supported yet */ - .type = pch_uart_type, - .release_port = pch_uart_release_port, - .request_port = pch_uart_request_port, - .config_port = pch_uart_config_port, - .verify_port = pch_uart_verify_port -}; - -static struct uart_driver pch_uart_driver = { - .owner = THIS_MODULE, - .driver_name = KBUILD_MODNAME, - .dev_name = PCH_UART_DRIVER_DEVICE, - .major = 0, - .minor = 0, - .nr = PCH_UART_NR, -}; - -static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, - int port_type) -{ - struct eg20t_port *priv; - int ret; - unsigned int iobase; - unsigned int mapbase; - unsigned char *rxbuf; - int fifosize, base_baud; - static int num; - - priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL); - if (priv == NULL) - goto init_port_alloc_err; - - rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL); - if (!rxbuf) - goto init_port_free_txbuf; - - switch (port_type) { - case PORT_UNKNOWN: - fifosize = 256; /* UART0 */ - base_baud = 1843200; /* 1.8432MHz */ - break; - case PORT_8250: - fifosize = 64; /* UART1~3 */ - base_baud = 1843200; /* 1.8432MHz */ - break; - default: - dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type); - goto init_port_hal_free; - } - - iobase = pci_resource_start(pdev, 0); - mapbase = pci_resource_start(pdev, 1); - priv->mapbase = mapbase; - priv->iobase = iobase; - priv->pdev = pdev; - priv->tx_empty = 1; - priv->rxbuf.buf = rxbuf; - priv->rxbuf.size = PAGE_SIZE; - - priv->fifo_size = fifosize; - priv->base_baud = base_baud; - priv->port_type = PORT_MAX_8250 + port_type + 1; - priv->port.dev = &pdev->dev; - priv->port.iobase = iobase; - priv->port.membase = NULL; - priv->port.mapbase = mapbase; - priv->port.irq = pdev->irq; - priv->port.iotype = UPIO_PORT; - priv->port.ops = &pch_uart_ops; - priv->port.flags = UPF_BOOT_AUTOCONF; - priv->port.fifosize = fifosize; - priv->port.line = num++; - priv->trigger = PCH_UART_HAL_TRIGGER_M; - - pci_set_drvdata(pdev, priv); - pch_uart_hal_request(pdev, fifosize, base_baud); - ret = uart_add_one_port(&pch_uart_driver, &priv->port); - if (ret < 0) - goto init_port_hal_free; - - return priv; - -init_port_hal_free: - free_page((unsigned long)rxbuf); -init_port_free_txbuf: - kfree(priv); -init_port_alloc_err: - - return NULL; -} - -static void pch_uart_exit_port(struct eg20t_port *priv) -{ - uart_remove_one_port(&pch_uart_driver, &priv->port); - pci_set_drvdata(priv->pdev, NULL); - free_page((unsigned long)priv->rxbuf.buf); -} - -static void pch_uart_pci_remove(struct pci_dev *pdev) -{ - struct eg20t_port *priv; - - priv = (struct eg20t_port *)pci_get_drvdata(pdev); - pch_uart_exit_port(priv); - pci_disable_device(pdev); - kfree(priv); - return; -} -#ifdef CONFIG_PM -static int pch_uart_pci_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct eg20t_port *priv = pci_get_drvdata(pdev); - - uart_suspend_port(&pch_uart_driver, &priv->port); - - pci_save_state(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - return 0; -} - -static int pch_uart_pci_resume(struct pci_dev *pdev) -{ - struct eg20t_port *priv = pci_get_drvdata(pdev); - int ret; - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - - ret = pci_enable_device(pdev); - if (ret) { - dev_err(&pdev->dev, - "%s-pci_enable_device failed(ret=%d) ", __func__, ret); - return ret; - } - - uart_resume_port(&pch_uart_driver, &priv->port); - - return 0; -} -#else -#define pch_uart_pci_suspend NULL -#define pch_uart_pci_resume NULL -#endif - -static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811), - .driver_data = PCH_UART_8LINE}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812), - .driver_data = PCH_UART_2LINE}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813), - .driver_data = PCH_UART_2LINE}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814), - .driver_data = PCH_UART_2LINE}, - {0,}, -}; - -static int __devinit pch_uart_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - int ret; - struct eg20t_port *priv; - - ret = pci_enable_device(pdev); - if (ret < 0) - goto probe_error; - - priv = pch_uart_init_port(pdev, id->driver_data); - if (!priv) { - ret = -EBUSY; - goto probe_disable_device; - } - pci_set_drvdata(pdev, priv); - - return ret; - -probe_disable_device: - pci_disable_device(pdev); -probe_error: - return ret; -} - -static struct pci_driver pch_uart_pci_driver = { - .name = "pch_uart", - .id_table = pch_uart_pci_id, - .probe = pch_uart_pci_probe, - .remove = __devexit_p(pch_uart_pci_remove), - .suspend = pch_uart_pci_suspend, - .resume = pch_uart_pci_resume, -}; - -static int __init pch_uart_module_init(void) -{ - int ret; - - /* register as UART driver */ - ret = uart_register_driver(&pch_uart_driver); - if (ret < 0) - return ret; - - /* register as PCI driver */ - ret = pci_register_driver(&pch_uart_pci_driver); - if (ret < 0) - uart_unregister_driver(&pch_uart_driver); - - return ret; -} -module_init(pch_uart_module_init); - -static void __exit pch_uart_module_exit(void) -{ - pci_unregister_driver(&pch_uart_pci_driver); - uart_unregister_driver(&pch_uart_driver); -} -module_exit(pch_uart_module_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver"); -module_param(default_baud, uint, S_IRUGO); diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c deleted file mode 100644 index 5b9cde79e4ea..000000000000 --- a/drivers/serial/pmac_zilog.c +++ /dev/null @@ -1,2208 +0,0 @@ -/* - * linux/drivers/serial/pmac_zilog.c - * - * Driver for PowerMac Z85c30 based ESCC cell found in the - * "macio" ASICs of various PowerMac models - * - * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * Derived from drivers/macintosh/macserial.c by Paul Mackerras - * and drivers/serial/sunzilog.c by David S. Miller - * - * Hrm... actually, I ripped most of sunzilog (Thanks David !) and - * adapted special tweaks needed for us. I don't think it's worth - * merging back those though. The DMA code still has to get in - * and once done, I expect that driver to remain fairly stable in - * the long term, unless we change the driver model again... - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * 2004-08-06 Harald Welte - * - Enable BREAK interrupt - * - Add support for sysreq - * - * TODO: - Add DMA support - * - Defer port shutdown to a few seconds after close - * - maybe put something right into uap->clk_divisor - */ - -#undef DEBUG -#undef DEBUG_HARD -#undef USE_CTRL_O_SYSRQ - -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_PPC_PMAC -#include -#include -#include -#include -#include -#else -#include -#define of_machine_is_compatible(x) (0) -#endif - -#if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include - -#include "pmac_zilog.h" - -/* Not yet implemented */ -#undef HAS_DBDMA - -static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt )"; -MODULE_AUTHOR("Benjamin Herrenschmidt "); -MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports."); -MODULE_LICENSE("GPL"); - -#ifdef CONFIG_SERIAL_PMACZILOG_TTYS -#define PMACZILOG_MAJOR TTY_MAJOR -#define PMACZILOG_MINOR 64 -#define PMACZILOG_NAME "ttyS" -#else -#define PMACZILOG_MAJOR 204 -#define PMACZILOG_MINOR 192 -#define PMACZILOG_NAME "ttyPZ" -#endif - - -/* - * For the sake of early serial console, we can do a pre-probe - * (optional) of the ports at rather early boot time. - */ -static struct uart_pmac_port pmz_ports[MAX_ZS_PORTS]; -static int pmz_ports_count; -static DEFINE_MUTEX(pmz_irq_mutex); - -static struct uart_driver pmz_uart_reg = { - .owner = THIS_MODULE, - .driver_name = PMACZILOG_NAME, - .dev_name = PMACZILOG_NAME, - .major = PMACZILOG_MAJOR, - .minor = PMACZILOG_MINOR, -}; - - -/* - * Load all registers to reprogram the port - * This function must only be called when the TX is not busy. The UART - * port lock must be held and local interrupts disabled. - */ -static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs) -{ - int i; - - if (ZS_IS_ASLEEP(uap)) - return; - - /* Let pending transmits finish. */ - for (i = 0; i < 1000; i++) { - unsigned char stat = read_zsreg(uap, R1); - if (stat & ALL_SNT) - break; - udelay(100); - } - - ZS_CLEARERR(uap); - zssync(uap); - ZS_CLEARFIFO(uap); - zssync(uap); - ZS_CLEARERR(uap); - - /* Disable all interrupts. */ - write_zsreg(uap, R1, - regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); - - /* Set parity, sync config, stop bits, and clock divisor. */ - write_zsreg(uap, R4, regs[R4]); - - /* Set misc. TX/RX control bits. */ - write_zsreg(uap, R10, regs[R10]); - - /* Set TX/RX controls sans the enable bits. */ - write_zsreg(uap, R3, regs[R3] & ~RxENABLE); - write_zsreg(uap, R5, regs[R5] & ~TxENABLE); - - /* now set R7 "prime" on ESCC */ - write_zsreg(uap, R15, regs[R15] | EN85C30); - write_zsreg(uap, R7, regs[R7P]); - - /* make sure we use R7 "non-prime" on ESCC */ - write_zsreg(uap, R15, regs[R15] & ~EN85C30); - - /* Synchronous mode config. */ - write_zsreg(uap, R6, regs[R6]); - write_zsreg(uap, R7, regs[R7]); - - /* Disable baud generator. */ - write_zsreg(uap, R14, regs[R14] & ~BRENAB); - - /* Clock mode control. */ - write_zsreg(uap, R11, regs[R11]); - - /* Lower and upper byte of baud rate generator divisor. */ - write_zsreg(uap, R12, regs[R12]); - write_zsreg(uap, R13, regs[R13]); - - /* Now rewrite R14, with BRENAB (if set). */ - write_zsreg(uap, R14, regs[R14]); - - /* Reset external status interrupts. */ - write_zsreg(uap, R0, RES_EXT_INT); - write_zsreg(uap, R0, RES_EXT_INT); - - /* Rewrite R3/R5, this time without enables masked. */ - write_zsreg(uap, R3, regs[R3]); - write_zsreg(uap, R5, regs[R5]); - - /* Rewrite R1, this time without IRQ enabled masked. */ - write_zsreg(uap, R1, regs[R1]); - - /* Enable interrupts */ - write_zsreg(uap, R9, regs[R9]); -} - -/* - * We do like sunzilog to avoid disrupting pending Tx - * Reprogram the Zilog channel HW registers with the copies found in the - * software state struct. If the transmitter is busy, we defer this update - * until the next TX complete interrupt. Else, we do it right now. - * - * The UART port lock must be held and local interrupts disabled. - */ -static void pmz_maybe_update_regs(struct uart_pmac_port *uap) -{ - if (!ZS_REGS_HELD(uap)) { - if (ZS_TX_ACTIVE(uap)) { - uap->flags |= PMACZILOG_FLAG_REGS_HELD; - } else { - pmz_debug("pmz: maybe_update_regs: updating\n"); - pmz_load_zsregs(uap, uap->curregs); - } - } -} - -static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) -{ - struct tty_struct *tty = NULL; - unsigned char ch, r1, drop, error, flag; - int loops = 0; - - /* The interrupt can be enabled when the port isn't open, typically - * that happens when using one port is open and the other closed (stale - * interrupt) or when one port is used as a console. - */ - if (!ZS_IS_OPEN(uap)) { - pmz_debug("pmz: draining input\n"); - /* Port is closed, drain input data */ - for (;;) { - if ((++loops) > 1000) - goto flood; - (void)read_zsreg(uap, R1); - write_zsreg(uap, R0, ERR_RES); - (void)read_zsdata(uap); - ch = read_zsreg(uap, R0); - if (!(ch & Rx_CH_AV)) - break; - } - return NULL; - } - - /* Sanity check, make sure the old bug is no longer happening */ - if (uap->port.state == NULL || uap->port.state->port.tty == NULL) { - WARN_ON(1); - (void)read_zsdata(uap); - return NULL; - } - tty = uap->port.state->port.tty; - - while (1) { - error = 0; - drop = 0; - - r1 = read_zsreg(uap, R1); - ch = read_zsdata(uap); - - if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { - write_zsreg(uap, R0, ERR_RES); - zssync(uap); - } - - ch &= uap->parity_mask; - if (ch == 0 && uap->flags & PMACZILOG_FLAG_BREAK) { - uap->flags &= ~PMACZILOG_FLAG_BREAK; - } - -#if defined(CONFIG_MAGIC_SYSRQ) && defined(CONFIG_SERIAL_CORE_CONSOLE) -#ifdef USE_CTRL_O_SYSRQ - /* Handle the SysRq ^O Hack */ - if (ch == '\x0f') { - uap->port.sysrq = jiffies + HZ*5; - goto next_char; - } -#endif /* USE_CTRL_O_SYSRQ */ - if (uap->port.sysrq) { - int swallow; - spin_unlock(&uap->port.lock); - swallow = uart_handle_sysrq_char(&uap->port, ch); - spin_lock(&uap->port.lock); - if (swallow) - goto next_char; - } -#endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */ - - /* A real serial line, record the character and status. */ - if (drop) - goto next_char; - - flag = TTY_NORMAL; - uap->port.icount.rx++; - - if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | BRK_ABRT)) { - error = 1; - if (r1 & BRK_ABRT) { - pmz_debug("pmz: got break !\n"); - r1 &= ~(PAR_ERR | CRC_ERR); - uap->port.icount.brk++; - if (uart_handle_break(&uap->port)) - goto next_char; - } - else if (r1 & PAR_ERR) - uap->port.icount.parity++; - else if (r1 & CRC_ERR) - uap->port.icount.frame++; - if (r1 & Rx_OVR) - uap->port.icount.overrun++; - r1 &= uap->port.read_status_mask; - if (r1 & BRK_ABRT) - flag = TTY_BREAK; - else if (r1 & PAR_ERR) - flag = TTY_PARITY; - else if (r1 & CRC_ERR) - flag = TTY_FRAME; - } - - if (uap->port.ignore_status_mask == 0xff || - (r1 & uap->port.ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); - } - if (r1 & Rx_OVR) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - next_char: - /* We can get stuck in an infinite loop getting char 0 when the - * line is in a wrong HW state, we break that here. - * When that happens, I disable the receive side of the driver. - * Note that what I've been experiencing is a real irq loop where - * I'm getting flooded regardless of the actual port speed. - * Something stange is going on with the HW - */ - if ((++loops) > 1000) - goto flood; - ch = read_zsreg(uap, R0); - if (!(ch & Rx_CH_AV)) - break; - } - - return tty; - flood: - uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); - write_zsreg(uap, R1, uap->curregs[R1]); - zssync(uap); - pmz_error("pmz: rx irq flood !\n"); - return tty; -} - -static void pmz_status_handle(struct uart_pmac_port *uap) -{ - unsigned char status; - - status = read_zsreg(uap, R0); - write_zsreg(uap, R0, RES_EXT_INT); - zssync(uap); - - if (ZS_IS_OPEN(uap) && ZS_WANTS_MODEM_STATUS(uap)) { - if (status & SYNC_HUNT) - uap->port.icount.dsr++; - - /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. - * But it does not tell us which bit has changed, we have to keep - * track of this ourselves. - * The CTS input is inverted for some reason. -- paulus - */ - if ((status ^ uap->prev_status) & DCD) - uart_handle_dcd_change(&uap->port, - (status & DCD)); - if ((status ^ uap->prev_status) & CTS) - uart_handle_cts_change(&uap->port, - !(status & CTS)); - - wake_up_interruptible(&uap->port.state->port.delta_msr_wait); - } - - if (status & BRK_ABRT) - uap->flags |= PMACZILOG_FLAG_BREAK; - - uap->prev_status = status; -} - -static void pmz_transmit_chars(struct uart_pmac_port *uap) -{ - struct circ_buf *xmit; - - if (ZS_IS_ASLEEP(uap)) - return; - if (ZS_IS_CONS(uap)) { - unsigned char status = read_zsreg(uap, R0); - - /* TX still busy? Just wait for the next TX done interrupt. - * - * It can occur because of how we do serial console writes. It would - * be nice to transmit console writes just like we normally would for - * a TTY line. (ie. buffered and TX interrupt driven). That is not - * easy because console writes cannot sleep. One solution might be - * to poll on enough port->xmit space becomming free. -DaveM - */ - if (!(status & Tx_BUF_EMP)) - return; - } - - uap->flags &= ~PMACZILOG_FLAG_TX_ACTIVE; - - if (ZS_REGS_HELD(uap)) { - pmz_load_zsregs(uap, uap->curregs); - uap->flags &= ~PMACZILOG_FLAG_REGS_HELD; - } - - if (ZS_TX_STOPPED(uap)) { - uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED; - goto ack_tx_int; - } - - /* Under some circumstances, we see interrupts reported for - * a closed channel. The interrupt mask in R1 is clear, but - * R3 still signals the interrupts and we see them when taking - * an interrupt for the other channel (this could be a qemu - * bug but since the ESCC doc doesn't specify precsiely whether - * R3 interrup status bits are masked by R1 interrupt enable - * bits, better safe than sorry). --BenH. - */ - if (!ZS_IS_OPEN(uap)) - goto ack_tx_int; - - if (uap->port.x_char) { - uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; - write_zsdata(uap, uap->port.x_char); - zssync(uap); - uap->port.icount.tx++; - uap->port.x_char = 0; - return; - } - - if (uap->port.state == NULL) - goto ack_tx_int; - xmit = &uap->port.state->xmit; - if (uart_circ_empty(xmit)) { - uart_write_wakeup(&uap->port); - goto ack_tx_int; - } - if (uart_tx_stopped(&uap->port)) - goto ack_tx_int; - - uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; - write_zsdata(uap, xmit->buf[xmit->tail]); - zssync(uap); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - uap->port.icount.tx++; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uap->port); - - return; - -ack_tx_int: - write_zsreg(uap, R0, RES_Tx_P); - zssync(uap); -} - -/* Hrm... we register that twice, fixme later.... */ -static irqreturn_t pmz_interrupt(int irq, void *dev_id) -{ - struct uart_pmac_port *uap = dev_id; - struct uart_pmac_port *uap_a; - struct uart_pmac_port *uap_b; - int rc = IRQ_NONE; - struct tty_struct *tty; - u8 r3; - - uap_a = pmz_get_port_A(uap); - uap_b = uap_a->mate; - - spin_lock(&uap_a->port.lock); - r3 = read_zsreg(uap_a, R3); - -#ifdef DEBUG_HARD - pmz_debug("irq, r3: %x\n", r3); -#endif - /* Channel A */ - tty = NULL; - if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { - write_zsreg(uap_a, R0, RES_H_IUS); - zssync(uap_a); - if (r3 & CHAEXT) - pmz_status_handle(uap_a); - if (r3 & CHARxIP) - tty = pmz_receive_chars(uap_a); - if (r3 & CHATxIP) - pmz_transmit_chars(uap_a); - rc = IRQ_HANDLED; - } - spin_unlock(&uap_a->port.lock); - if (tty != NULL) - tty_flip_buffer_push(tty); - - if (uap_b->node == NULL) - goto out; - - spin_lock(&uap_b->port.lock); - tty = NULL; - if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { - write_zsreg(uap_b, R0, RES_H_IUS); - zssync(uap_b); - if (r3 & CHBEXT) - pmz_status_handle(uap_b); - if (r3 & CHBRxIP) - tty = pmz_receive_chars(uap_b); - if (r3 & CHBTxIP) - pmz_transmit_chars(uap_b); - rc = IRQ_HANDLED; - } - spin_unlock(&uap_b->port.lock); - if (tty != NULL) - tty_flip_buffer_push(tty); - - out: -#ifdef DEBUG_HARD - pmz_debug("irq done.\n"); -#endif - return rc; -} - -/* - * Peek the status register, lock not held by caller - */ -static inline u8 pmz_peek_status(struct uart_pmac_port *uap) -{ - unsigned long flags; - u8 status; - - spin_lock_irqsave(&uap->port.lock, flags); - status = read_zsreg(uap, R0); - spin_unlock_irqrestore(&uap->port.lock, flags); - - return status; -} - -/* - * Check if transmitter is empty - * The port lock is not held. - */ -static unsigned int pmz_tx_empty(struct uart_port *port) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned char status; - - if (ZS_IS_ASLEEP(uap) || uap->node == NULL) - return TIOCSER_TEMT; - - status = pmz_peek_status(to_pmz(port)); - if (status & Tx_BUF_EMP) - return TIOCSER_TEMT; - return 0; -} - -/* - * Set Modem Control (RTS & DTR) bits - * The port lock is held and interrupts are disabled. - * Note: Shall we really filter out RTS on external ports or - * should that be dealt at higher level only ? - */ -static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned char set_bits, clear_bits; - - /* Do nothing for irda for now... */ - if (ZS_IS_IRDA(uap)) - return; - /* We get called during boot with a port not up yet */ - if (ZS_IS_ASLEEP(uap) || - !(ZS_IS_OPEN(uap) || ZS_IS_CONS(uap))) - return; - - set_bits = clear_bits = 0; - - if (ZS_IS_INTMODEM(uap)) { - if (mctrl & TIOCM_RTS) - set_bits |= RTS; - else - clear_bits |= RTS; - } - if (mctrl & TIOCM_DTR) - set_bits |= DTR; - else - clear_bits |= DTR; - - /* NOTE: Not subject to 'transmitter active' rule. */ - uap->curregs[R5] |= set_bits; - uap->curregs[R5] &= ~clear_bits; - if (ZS_IS_ASLEEP(uap)) - return; - write_zsreg(uap, R5, uap->curregs[R5]); - pmz_debug("pmz_set_mctrl: set bits: %x, clear bits: %x -> %x\n", - set_bits, clear_bits, uap->curregs[R5]); - zssync(uap); -} - -/* - * Get Modem Control bits (only the input ones, the core will - * or that with a cached value of the control ones) - * The port lock is held and interrupts are disabled. - */ -static unsigned int pmz_get_mctrl(struct uart_port *port) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned char status; - unsigned int ret; - - if (ZS_IS_ASLEEP(uap) || uap->node == NULL) - return 0; - - status = read_zsreg(uap, R0); - - ret = 0; - if (status & DCD) - ret |= TIOCM_CAR; - if (status & SYNC_HUNT) - ret |= TIOCM_DSR; - if (!(status & CTS)) - ret |= TIOCM_CTS; - - return ret; -} - -/* - * Stop TX side. Dealt like sunzilog at next Tx interrupt, - * though for DMA, we will have to do a bit more. - * The port lock is held and interrupts are disabled. - */ -static void pmz_stop_tx(struct uart_port *port) -{ - to_pmz(port)->flags |= PMACZILOG_FLAG_TX_STOPPED; -} - -/* - * Kick the Tx side. - * The port lock is held and interrupts are disabled. - */ -static void pmz_start_tx(struct uart_port *port) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned char status; - - pmz_debug("pmz: start_tx()\n"); - - uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; - uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED; - - if (ZS_IS_ASLEEP(uap) || uap->node == NULL) - return; - - status = read_zsreg(uap, R0); - - /* TX busy? Just wait for the TX done interrupt. */ - if (!(status & Tx_BUF_EMP)) - return; - - /* Send the first character to jump-start the TX done - * IRQ sending engine. - */ - if (port->x_char) { - write_zsdata(uap, port->x_char); - zssync(uap); - port->icount.tx++; - port->x_char = 0; - } else { - struct circ_buf *xmit = &port->state->xmit; - - write_zsdata(uap, xmit->buf[xmit->tail]); - zssync(uap); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uap->port); - } - pmz_debug("pmz: start_tx() done.\n"); -} - -/* - * Stop Rx side, basically disable emitting of - * Rx interrupts on the port. We don't disable the rx - * side of the chip proper though - * The port lock is held. - */ -static void pmz_stop_rx(struct uart_port *port) -{ - struct uart_pmac_port *uap = to_pmz(port); - - if (ZS_IS_ASLEEP(uap) || uap->node == NULL) - return; - - pmz_debug("pmz: stop_rx()()\n"); - - /* Disable all RX interrupts. */ - uap->curregs[R1] &= ~RxINT_MASK; - pmz_maybe_update_regs(uap); - - pmz_debug("pmz: stop_rx() done.\n"); -} - -/* - * Enable modem status change interrupts - * The port lock is held. - */ -static void pmz_enable_ms(struct uart_port *port) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned char new_reg; - - if (ZS_IS_IRDA(uap) || uap->node == NULL) - return; - new_reg = uap->curregs[R15] | (DCDIE | SYNCIE | CTSIE); - if (new_reg != uap->curregs[R15]) { - uap->curregs[R15] = new_reg; - - if (ZS_IS_ASLEEP(uap)) - return; - /* NOTE: Not subject to 'transmitter active' rule. */ - write_zsreg(uap, R15, uap->curregs[R15]); - } -} - -/* - * Control break state emission - * The port lock is not held. - */ -static void pmz_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned char set_bits, clear_bits, new_reg; - unsigned long flags; - - if (uap->node == NULL) - return; - set_bits = clear_bits = 0; - - if (break_state) - set_bits |= SND_BRK; - else - clear_bits |= SND_BRK; - - spin_lock_irqsave(&port->lock, flags); - - new_reg = (uap->curregs[R5] | set_bits) & ~clear_bits; - if (new_reg != uap->curregs[R5]) { - uap->curregs[R5] = new_reg; - - /* NOTE: Not subject to 'transmitter active' rule. */ - if (ZS_IS_ASLEEP(uap)) { - spin_unlock_irqrestore(&port->lock, flags); - return; - } - write_zsreg(uap, R5, uap->curregs[R5]); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -#ifdef CONFIG_PPC_PMAC - -/* - * Turn power on or off to the SCC and associated stuff - * (port drivers, modem, IR port, etc.) - * Returns the number of milliseconds we should wait before - * trying to use the port. - */ -static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) -{ - int delay = 0; - int rc; - - if (state) { - rc = pmac_call_feature( - PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 1); - pmz_debug("port power on result: %d\n", rc); - if (ZS_IS_INTMODEM(uap)) { - rc = pmac_call_feature( - PMAC_FTR_MODEM_ENABLE, uap->node, 0, 1); - delay = 2500; /* wait for 2.5s before using */ - pmz_debug("modem power result: %d\n", rc); - } - } else { - /* TODO: Make that depend on a timer, don't power down - * immediately - */ - if (ZS_IS_INTMODEM(uap)) { - rc = pmac_call_feature( - PMAC_FTR_MODEM_ENABLE, uap->node, 0, 0); - pmz_debug("port power off result: %d\n", rc); - } - pmac_call_feature(PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 0); - } - return delay; -} - -#else - -static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) -{ - return 0; -} - -#endif /* !CONFIG_PPC_PMAC */ - -/* - * FixZeroBug....Works around a bug in the SCC receving channel. - * Inspired from Darwin code, 15 Sept. 2000 -DanM - * - * The following sequence prevents a problem that is seen with O'Hare ASICs - * (most versions -- also with some Heathrow and Hydra ASICs) where a zero - * at the input to the receiver becomes 'stuck' and locks up the receiver. - * This problem can occur as a result of a zero bit at the receiver input - * coincident with any of the following events: - * - * The SCC is initialized (hardware or software). - * A framing error is detected. - * The clocking option changes from synchronous or X1 asynchronous - * clocking to X16, X32, or X64 asynchronous clocking. - * The decoding mode is changed among NRZ, NRZI, FM0, or FM1. - * - * This workaround attempts to recover from the lockup condition by placing - * the SCC in synchronous loopback mode with a fast clock before programming - * any of the asynchronous modes. - */ -static void pmz_fix_zero_bug_scc(struct uart_pmac_port *uap) -{ - write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB); - zssync(uap); - udelay(10); - write_zsreg(uap, 9, (ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB) | NV); - zssync(uap); - - write_zsreg(uap, 4, X1CLK | MONSYNC); - write_zsreg(uap, 3, Rx8); - write_zsreg(uap, 5, Tx8 | RTS); - write_zsreg(uap, 9, NV); /* Didn't we already do this? */ - write_zsreg(uap, 11, RCBR | TCBR); - write_zsreg(uap, 12, 0); - write_zsreg(uap, 13, 0); - write_zsreg(uap, 14, (LOOPBAK | BRSRC)); - write_zsreg(uap, 14, (LOOPBAK | BRSRC | BRENAB)); - write_zsreg(uap, 3, Rx8 | RxENABLE); - write_zsreg(uap, 0, RES_EXT_INT); - write_zsreg(uap, 0, RES_EXT_INT); - write_zsreg(uap, 0, RES_EXT_INT); /* to kill some time */ - - /* The channel should be OK now, but it is probably receiving - * loopback garbage. - * Switch to asynchronous mode, disable the receiver, - * and discard everything in the receive buffer. - */ - write_zsreg(uap, 9, NV); - write_zsreg(uap, 4, X16CLK | SB_MASK); - write_zsreg(uap, 3, Rx8); - - while (read_zsreg(uap, 0) & Rx_CH_AV) { - (void)read_zsreg(uap, 8); - write_zsreg(uap, 0, RES_EXT_INT); - write_zsreg(uap, 0, ERR_RES); - } -} - -/* - * Real startup routine, powers up the hardware and sets up - * the SCC. Returns a delay in ms where you need to wait before - * actually using the port, this is typically the internal modem - * powerup delay. This routine expect the lock to be taken. - */ -static int __pmz_startup(struct uart_pmac_port *uap) -{ - int pwr_delay = 0; - - memset(&uap->curregs, 0, sizeof(uap->curregs)); - - /* Power up the SCC & underlying hardware (modem/irda) */ - pwr_delay = pmz_set_scc_power(uap, 1); - - /* Nice buggy HW ... */ - pmz_fix_zero_bug_scc(uap); - - /* Reset the channel */ - uap->curregs[R9] = 0; - write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB); - zssync(uap); - udelay(10); - write_zsreg(uap, 9, 0); - zssync(uap); - - /* Clear the interrupt registers */ - write_zsreg(uap, R1, 0); - write_zsreg(uap, R0, ERR_RES); - write_zsreg(uap, R0, ERR_RES); - write_zsreg(uap, R0, RES_H_IUS); - write_zsreg(uap, R0, RES_H_IUS); - - /* Setup some valid baud rate */ - uap->curregs[R4] = X16CLK | SB1; - uap->curregs[R3] = Rx8; - uap->curregs[R5] = Tx8 | RTS; - if (!ZS_IS_IRDA(uap)) - uap->curregs[R5] |= DTR; - uap->curregs[R12] = 0; - uap->curregs[R13] = 0; - uap->curregs[R14] = BRENAB; - - /* Clear handshaking, enable BREAK interrupts */ - uap->curregs[R15] = BRKIE; - - /* Master interrupt enable */ - uap->curregs[R9] |= NV | MIE; - - pmz_load_zsregs(uap, uap->curregs); - - /* Enable receiver and transmitter. */ - write_zsreg(uap, R3, uap->curregs[R3] |= RxENABLE); - write_zsreg(uap, R5, uap->curregs[R5] |= TxENABLE); - - /* Remember status for DCD/CTS changes */ - uap->prev_status = read_zsreg(uap, R0); - - return pwr_delay; -} - -static void pmz_irda_reset(struct uart_pmac_port *uap) -{ - uap->curregs[R5] |= DTR; - write_zsreg(uap, R5, uap->curregs[R5]); - zssync(uap); - mdelay(110); - uap->curregs[R5] &= ~DTR; - write_zsreg(uap, R5, uap->curregs[R5]); - zssync(uap); - mdelay(10); -} - -/* - * This is the "normal" startup routine, using the above one - * wrapped with the lock and doing a schedule delay - */ -static int pmz_startup(struct uart_port *port) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned long flags; - int pwr_delay = 0; - - pmz_debug("pmz: startup()\n"); - - if (ZS_IS_ASLEEP(uap)) - return -EAGAIN; - if (uap->node == NULL) - return -ENODEV; - - mutex_lock(&pmz_irq_mutex); - - uap->flags |= PMACZILOG_FLAG_IS_OPEN; - - /* A console is never powered down. Else, power up and - * initialize the chip - */ - if (!ZS_IS_CONS(uap)) { - spin_lock_irqsave(&port->lock, flags); - pwr_delay = __pmz_startup(uap); - spin_unlock_irqrestore(&port->lock, flags); - } - - pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON; - if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, - "SCC", uap)) { - pmz_error("Unable to register zs interrupt handler.\n"); - pmz_set_scc_power(uap, 0); - mutex_unlock(&pmz_irq_mutex); - return -ENXIO; - } - - mutex_unlock(&pmz_irq_mutex); - - /* Right now, we deal with delay by blocking here, I'll be - * smarter later on - */ - if (pwr_delay != 0) { - pmz_debug("pmz: delaying %d ms\n", pwr_delay); - msleep(pwr_delay); - } - - /* IrDA reset is done now */ - if (ZS_IS_IRDA(uap)) - pmz_irda_reset(uap); - - /* Enable interrupts emission from the chip */ - spin_lock_irqsave(&port->lock, flags); - uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB; - if (!ZS_IS_EXTCLK(uap)) - uap->curregs[R1] |= EXT_INT_ENAB; - write_zsreg(uap, R1, uap->curregs[R1]); - spin_unlock_irqrestore(&port->lock, flags); - - pmz_debug("pmz: startup() done.\n"); - - return 0; -} - -static void pmz_shutdown(struct uart_port *port) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned long flags; - - pmz_debug("pmz: shutdown()\n"); - - if (uap->node == NULL) - return; - - mutex_lock(&pmz_irq_mutex); - - /* Release interrupt handler */ - free_irq(uap->port.irq, uap); - - spin_lock_irqsave(&port->lock, flags); - - uap->flags &= ~PMACZILOG_FLAG_IS_OPEN; - - if (!ZS_IS_OPEN(uap->mate)) - pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON; - - /* Disable interrupts */ - if (!ZS_IS_ASLEEP(uap)) { - uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); - write_zsreg(uap, R1, uap->curregs[R1]); - zssync(uap); - } - - if (ZS_IS_CONS(uap) || ZS_IS_ASLEEP(uap)) { - spin_unlock_irqrestore(&port->lock, flags); - mutex_unlock(&pmz_irq_mutex); - return; - } - - /* Disable receiver and transmitter. */ - uap->curregs[R3] &= ~RxENABLE; - uap->curregs[R5] &= ~TxENABLE; - - /* Disable all interrupts and BRK assertion. */ - uap->curregs[R5] &= ~SND_BRK; - pmz_maybe_update_regs(uap); - - /* Shut the chip down */ - pmz_set_scc_power(uap, 0); - - spin_unlock_irqrestore(&port->lock, flags); - - mutex_unlock(&pmz_irq_mutex); - - pmz_debug("pmz: shutdown() done.\n"); -} - -/* Shared by TTY driver and serial console setup. The port lock is held - * and local interrupts are disabled. - */ -static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag, - unsigned int iflag, unsigned long baud) -{ - int brg; - - /* Switch to external clocking for IrDA high clock rates. That - * code could be re-used for Midi interfaces with different - * multipliers - */ - if (baud >= 115200 && ZS_IS_IRDA(uap)) { - uap->curregs[R4] = X1CLK; - uap->curregs[R11] = RCTRxCP | TCTRxCP; - uap->curregs[R14] = 0; /* BRG off */ - uap->curregs[R12] = 0; - uap->curregs[R13] = 0; - uap->flags |= PMACZILOG_FLAG_IS_EXTCLK; - } else { - switch (baud) { - case ZS_CLOCK/16: /* 230400 */ - uap->curregs[R4] = X16CLK; - uap->curregs[R11] = 0; - uap->curregs[R14] = 0; - break; - case ZS_CLOCK/32: /* 115200 */ - uap->curregs[R4] = X32CLK; - uap->curregs[R11] = 0; - uap->curregs[R14] = 0; - break; - default: - uap->curregs[R4] = X16CLK; - uap->curregs[R11] = TCBR | RCBR; - brg = BPS_TO_BRG(baud, ZS_CLOCK / 16); - uap->curregs[R12] = (brg & 255); - uap->curregs[R13] = ((brg >> 8) & 255); - uap->curregs[R14] = BRENAB; - } - uap->flags &= ~PMACZILOG_FLAG_IS_EXTCLK; - } - - /* Character size, stop bits, and parity. */ - uap->curregs[3] &= ~RxN_MASK; - uap->curregs[5] &= ~TxN_MASK; - - switch (cflag & CSIZE) { - case CS5: - uap->curregs[3] |= Rx5; - uap->curregs[5] |= Tx5; - uap->parity_mask = 0x1f; - break; - case CS6: - uap->curregs[3] |= Rx6; - uap->curregs[5] |= Tx6; - uap->parity_mask = 0x3f; - break; - case CS7: - uap->curregs[3] |= Rx7; - uap->curregs[5] |= Tx7; - uap->parity_mask = 0x7f; - break; - case CS8: - default: - uap->curregs[3] |= Rx8; - uap->curregs[5] |= Tx8; - uap->parity_mask = 0xff; - break; - }; - uap->curregs[4] &= ~(SB_MASK); - if (cflag & CSTOPB) - uap->curregs[4] |= SB2; - else - uap->curregs[4] |= SB1; - if (cflag & PARENB) - uap->curregs[4] |= PAR_ENAB; - else - uap->curregs[4] &= ~PAR_ENAB; - if (!(cflag & PARODD)) - uap->curregs[4] |= PAR_EVEN; - else - uap->curregs[4] &= ~PAR_EVEN; - - uap->port.read_status_mask = Rx_OVR; - if (iflag & INPCK) - uap->port.read_status_mask |= CRC_ERR | PAR_ERR; - if (iflag & (BRKINT | PARMRK)) - uap->port.read_status_mask |= BRK_ABRT; - - uap->port.ignore_status_mask = 0; - if (iflag & IGNPAR) - uap->port.ignore_status_mask |= CRC_ERR | PAR_ERR; - if (iflag & IGNBRK) { - uap->port.ignore_status_mask |= BRK_ABRT; - if (iflag & IGNPAR) - uap->port.ignore_status_mask |= Rx_OVR; - } - - if ((cflag & CREAD) == 0) - uap->port.ignore_status_mask = 0xff; -} - - -/* - * Set the irda codec on the imac to the specified baud rate. - */ -static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) -{ - u8 cmdbyte; - int t, version; - - switch (*baud) { - /* SIR modes */ - case 2400: - cmdbyte = 0x53; - break; - case 4800: - cmdbyte = 0x52; - break; - case 9600: - cmdbyte = 0x51; - break; - case 19200: - cmdbyte = 0x50; - break; - case 38400: - cmdbyte = 0x4f; - break; - case 57600: - cmdbyte = 0x4e; - break; - case 115200: - cmdbyte = 0x4d; - break; - /* The FIR modes aren't really supported at this point, how - * do we select the speed ? via the FCR on KeyLargo ? - */ - case 1152000: - cmdbyte = 0; - break; - case 4000000: - cmdbyte = 0; - break; - default: /* 9600 */ - cmdbyte = 0x51; - *baud = 9600; - break; - } - - /* Wait for transmitter to drain */ - t = 10000; - while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0 - || (read_zsreg(uap, R1) & ALL_SNT) == 0) { - if (--t <= 0) { - pmz_error("transmitter didn't drain\n"); - return; - } - udelay(10); - } - - /* Drain the receiver too */ - t = 100; - (void)read_zsdata(uap); - (void)read_zsdata(uap); - (void)read_zsdata(uap); - mdelay(10); - while (read_zsreg(uap, R0) & Rx_CH_AV) { - read_zsdata(uap); - mdelay(10); - if (--t <= 0) { - pmz_error("receiver didn't drain\n"); - return; - } - } - - /* Switch to command mode */ - uap->curregs[R5] |= DTR; - write_zsreg(uap, R5, uap->curregs[R5]); - zssync(uap); - mdelay(1); - - /* Switch SCC to 19200 */ - pmz_convert_to_zs(uap, CS8, 0, 19200); - pmz_load_zsregs(uap, uap->curregs); - mdelay(1); - - /* Write get_version command byte */ - write_zsdata(uap, 1); - t = 5000; - while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { - if (--t <= 0) { - pmz_error("irda_setup timed out on get_version byte\n"); - goto out; - } - udelay(10); - } - version = read_zsdata(uap); - - if (version < 4) { - pmz_info("IrDA: dongle version %d not supported\n", version); - goto out; - } - - /* Send speed mode */ - write_zsdata(uap, cmdbyte); - t = 5000; - while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { - if (--t <= 0) { - pmz_error("irda_setup timed out on speed mode byte\n"); - goto out; - } - udelay(10); - } - t = read_zsdata(uap); - if (t != cmdbyte) - pmz_error("irda_setup speed mode byte = %x (%x)\n", t, cmdbyte); - - pmz_info("IrDA setup for %ld bps, dongle version: %d\n", - *baud, version); - - (void)read_zsdata(uap); - (void)read_zsdata(uap); - (void)read_zsdata(uap); - - out: - /* Switch back to data mode */ - uap->curregs[R5] &= ~DTR; - write_zsreg(uap, R5, uap->curregs[R5]); - zssync(uap); - - (void)read_zsdata(uap); - (void)read_zsdata(uap); - (void)read_zsdata(uap); -} - - -static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned long baud; - - pmz_debug("pmz: set_termios()\n"); - - if (ZS_IS_ASLEEP(uap)) - return; - - memcpy(&uap->termios_cache, termios, sizeof(struct ktermios)); - - /* XXX Check which revs of machines actually allow 1 and 4Mb speeds - * on the IR dongle. Note that the IRTTY driver currently doesn't know - * about the FIR mode and high speed modes. So these are unused. For - * implementing proper support for these, we should probably add some - * DMA as well, at least on the Rx side, which isn't a simple thing - * at this point. - */ - if (ZS_IS_IRDA(uap)) { - /* Calc baud rate */ - baud = uart_get_baud_rate(port, termios, old, 1200, 4000000); - pmz_debug("pmz: switch IRDA to %ld bauds\n", baud); - /* Cet the irda codec to the right rate */ - pmz_irda_setup(uap, &baud); - /* Set final baud rate */ - pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud); - pmz_load_zsregs(uap, uap->curregs); - zssync(uap); - } else { - baud = uart_get_baud_rate(port, termios, old, 1200, 230400); - pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud); - /* Make sure modem status interrupts are correctly configured */ - if (UART_ENABLE_MS(&uap->port, termios->c_cflag)) { - uap->curregs[R15] |= DCDIE | SYNCIE | CTSIE; - uap->flags |= PMACZILOG_FLAG_MODEM_STATUS; - } else { - uap->curregs[R15] &= ~(DCDIE | SYNCIE | CTSIE); - uap->flags &= ~PMACZILOG_FLAG_MODEM_STATUS; - } - - /* Load registers to the chip */ - pmz_maybe_update_regs(uap); - } - uart_update_timeout(port, termios->c_cflag, baud); - - pmz_debug("pmz: set_termios() done.\n"); -} - -/* The port lock is not held. */ -static void pmz_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_pmac_port *uap = to_pmz(port); - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - - /* Disable IRQs on the port */ - uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); - write_zsreg(uap, R1, uap->curregs[R1]); - - /* Setup new port configuration */ - __pmz_set_termios(port, termios, old); - - /* Re-enable IRQs on the port */ - if (ZS_IS_OPEN(uap)) { - uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB; - if (!ZS_IS_EXTCLK(uap)) - uap->curregs[R1] |= EXT_INT_ENAB; - write_zsreg(uap, R1, uap->curregs[R1]); - } - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *pmz_type(struct uart_port *port) -{ - struct uart_pmac_port *uap = to_pmz(port); - - if (ZS_IS_IRDA(uap)) - return "Z85c30 ESCC - Infrared port"; - else if (ZS_IS_INTMODEM(uap)) - return "Z85c30 ESCC - Internal modem"; - return "Z85c30 ESCC - Serial port"; -} - -/* We do not request/release mappings of the registers here, this - * happens at early serial probe time. - */ -static void pmz_release_port(struct uart_port *port) -{ -} - -static int pmz_request_port(struct uart_port *port) -{ - return 0; -} - -/* These do not need to do anything interesting either. */ -static void pmz_config_port(struct uart_port *port, int flags) -{ -} - -/* We do not support letting the user mess with the divisor, IRQ, etc. */ -static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return -EINVAL; -} - -#ifdef CONFIG_CONSOLE_POLL - -static int pmz_poll_get_char(struct uart_port *port) -{ - struct uart_pmac_port *uap = (struct uart_pmac_port *)port; - - while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) - udelay(5); - return read_zsdata(uap); -} - -static void pmz_poll_put_char(struct uart_port *port, unsigned char c) -{ - struct uart_pmac_port *uap = (struct uart_pmac_port *)port; - - /* Wait for the transmit buffer to empty. */ - while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) - udelay(5); - write_zsdata(uap, c); -} - -#endif /* CONFIG_CONSOLE_POLL */ - -static struct uart_ops pmz_pops = { - .tx_empty = pmz_tx_empty, - .set_mctrl = pmz_set_mctrl, - .get_mctrl = pmz_get_mctrl, - .stop_tx = pmz_stop_tx, - .start_tx = pmz_start_tx, - .stop_rx = pmz_stop_rx, - .enable_ms = pmz_enable_ms, - .break_ctl = pmz_break_ctl, - .startup = pmz_startup, - .shutdown = pmz_shutdown, - .set_termios = pmz_set_termios, - .type = pmz_type, - .release_port = pmz_release_port, - .request_port = pmz_request_port, - .config_port = pmz_config_port, - .verify_port = pmz_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = pmz_poll_get_char, - .poll_put_char = pmz_poll_put_char, -#endif -}; - -#ifdef CONFIG_PPC_PMAC - -/* - * Setup one port structure after probing, HW is down at this point, - * Unlike sunzilog, we don't need to pre-init the spinlock as we don't - * register our console before uart_add_one_port() is called - */ -static int __init pmz_init_port(struct uart_pmac_port *uap) -{ - struct device_node *np = uap->node; - const char *conn; - const struct slot_names_prop { - int count; - char name[1]; - } *slots; - int len; - struct resource r_ports, r_rxdma, r_txdma; - - /* - * Request & map chip registers - */ - if (of_address_to_resource(np, 0, &r_ports)) - return -ENODEV; - uap->port.mapbase = r_ports.start; - uap->port.membase = ioremap(uap->port.mapbase, 0x1000); - - uap->control_reg = uap->port.membase; - uap->data_reg = uap->control_reg + 0x10; - - /* - * Request & map DBDMA registers - */ -#ifdef HAS_DBDMA - if (of_address_to_resource(np, 1, &r_txdma) == 0 && - of_address_to_resource(np, 2, &r_rxdma) == 0) - uap->flags |= PMACZILOG_FLAG_HAS_DMA; -#else - memset(&r_txdma, 0, sizeof(struct resource)); - memset(&r_rxdma, 0, sizeof(struct resource)); -#endif - if (ZS_HAS_DMA(uap)) { - uap->tx_dma_regs = ioremap(r_txdma.start, 0x100); - if (uap->tx_dma_regs == NULL) { - uap->flags &= ~PMACZILOG_FLAG_HAS_DMA; - goto no_dma; - } - uap->rx_dma_regs = ioremap(r_rxdma.start, 0x100); - if (uap->rx_dma_regs == NULL) { - iounmap(uap->tx_dma_regs); - uap->tx_dma_regs = NULL; - uap->flags &= ~PMACZILOG_FLAG_HAS_DMA; - goto no_dma; - } - uap->tx_dma_irq = irq_of_parse_and_map(np, 1); - uap->rx_dma_irq = irq_of_parse_and_map(np, 2); - } -no_dma: - - /* - * Detect port type - */ - if (of_device_is_compatible(np, "cobalt")) - uap->flags |= PMACZILOG_FLAG_IS_INTMODEM; - conn = of_get_property(np, "AAPL,connector", &len); - if (conn && (strcmp(conn, "infrared") == 0)) - uap->flags |= PMACZILOG_FLAG_IS_IRDA; - uap->port_type = PMAC_SCC_ASYNC; - /* 1999 Powerbook G3 has slot-names property instead */ - slots = of_get_property(np, "slot-names", &len); - if (slots && slots->count > 0) { - if (strcmp(slots->name, "IrDA") == 0) - uap->flags |= PMACZILOG_FLAG_IS_IRDA; - else if (strcmp(slots->name, "Modem") == 0) - uap->flags |= PMACZILOG_FLAG_IS_INTMODEM; - } - if (ZS_IS_IRDA(uap)) - uap->port_type = PMAC_SCC_IRDA; - if (ZS_IS_INTMODEM(uap)) { - struct device_node* i2c_modem = - of_find_node_by_name(NULL, "i2c-modem"); - if (i2c_modem) { - const char* mid = - of_get_property(i2c_modem, "modem-id", NULL); - if (mid) switch(*mid) { - case 0x04 : - case 0x05 : - case 0x07 : - case 0x08 : - case 0x0b : - case 0x0c : - uap->port_type = PMAC_SCC_I2S1; - } - printk(KERN_INFO "pmac_zilog: i2c-modem detected, id: %d\n", - mid ? (*mid) : 0); - of_node_put(i2c_modem); - } else { - printk(KERN_INFO "pmac_zilog: serial modem detected\n"); - } - } - - /* - * Init remaining bits of "port" structure - */ - uap->port.iotype = UPIO_MEM; - uap->port.irq = irq_of_parse_and_map(np, 0); - uap->port.uartclk = ZS_CLOCK; - uap->port.fifosize = 1; - uap->port.ops = &pmz_pops; - uap->port.type = PORT_PMAC_ZILOG; - uap->port.flags = 0; - - /* - * Fixup for the port on Gatwick for which the device-tree has - * missing interrupts. Normally, the macio_dev would contain - * fixed up interrupt info, but we use the device-tree directly - * here due to early probing so we need the fixup too. - */ - if (uap->port.irq == NO_IRQ && - np->parent && np->parent->parent && - of_device_is_compatible(np->parent->parent, "gatwick")) { - /* IRQs on gatwick are offset by 64 */ - uap->port.irq = irq_create_mapping(NULL, 64 + 15); - uap->tx_dma_irq = irq_create_mapping(NULL, 64 + 4); - uap->rx_dma_irq = irq_create_mapping(NULL, 64 + 5); - } - - /* Setup some valid baud rate information in the register - * shadows so we don't write crap there before baud rate is - * first initialized. - */ - pmz_convert_to_zs(uap, CS8, 0, 9600); - - return 0; -} - -/* - * Get rid of a port on module removal - */ -static void pmz_dispose_port(struct uart_pmac_port *uap) -{ - struct device_node *np; - - np = uap->node; - iounmap(uap->rx_dma_regs); - iounmap(uap->tx_dma_regs); - iounmap(uap->control_reg); - uap->node = NULL; - of_node_put(np); - memset(uap, 0, sizeof(struct uart_pmac_port)); -} - -/* - * Called upon match with an escc node in the device-tree. - */ -static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match) -{ - int i; - - /* Iterate the pmz_ports array to find a matching entry - */ - for (i = 0; i < MAX_ZS_PORTS; i++) - if (pmz_ports[i].node == mdev->ofdev.dev.of_node) { - struct uart_pmac_port *uap = &pmz_ports[i]; - - uap->dev = mdev; - dev_set_drvdata(&mdev->ofdev.dev, uap); - if (macio_request_resources(uap->dev, "pmac_zilog")) - printk(KERN_WARNING "%s: Failed to request resource" - ", port still active\n", - uap->node->name); - else - uap->flags |= PMACZILOG_FLAG_RSRC_REQUESTED; - return 0; - } - return -ENODEV; -} - -/* - * That one should not be called, macio isn't really a hotswap device, - * we don't expect one of those serial ports to go away... - */ -static int pmz_detach(struct macio_dev *mdev) -{ - struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); - - if (!uap) - return -ENODEV; - - if (uap->flags & PMACZILOG_FLAG_RSRC_REQUESTED) { - macio_release_resources(uap->dev); - uap->flags &= ~PMACZILOG_FLAG_RSRC_REQUESTED; - } - dev_set_drvdata(&mdev->ofdev.dev, NULL); - uap->dev = NULL; - - return 0; -} - - -static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state) -{ - struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); - struct uart_state *state; - unsigned long flags; - - if (uap == NULL) { - printk("HRM... pmz_suspend with NULL uap\n"); - return 0; - } - - if (pm_state.event == mdev->ofdev.dev.power.power_state.event) - return 0; - - pmz_debug("suspend, switching to state %d\n", pm_state.event); - - state = pmz_uart_reg.state + uap->port.line; - - mutex_lock(&pmz_irq_mutex); - mutex_lock(&state->port.mutex); - - spin_lock_irqsave(&uap->port.lock, flags); - - if (ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)) { - /* Disable receiver and transmitter. */ - uap->curregs[R3] &= ~RxENABLE; - uap->curregs[R5] &= ~TxENABLE; - - /* Disable all interrupts and BRK assertion. */ - uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); - uap->curregs[R5] &= ~SND_BRK; - pmz_load_zsregs(uap, uap->curregs); - uap->flags |= PMACZILOG_FLAG_IS_ASLEEP; - mb(); - } - - spin_unlock_irqrestore(&uap->port.lock, flags); - - if (ZS_IS_OPEN(uap) || ZS_IS_OPEN(uap->mate)) - if (ZS_IS_ASLEEP(uap->mate) && ZS_IS_IRQ_ON(pmz_get_port_A(uap))) { - pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON; - disable_irq(uap->port.irq); - } - - if (ZS_IS_CONS(uap)) - uap->port.cons->flags &= ~CON_ENABLED; - - /* Shut the chip down */ - pmz_set_scc_power(uap, 0); - - mutex_unlock(&state->port.mutex); - mutex_unlock(&pmz_irq_mutex); - - pmz_debug("suspend, switching complete\n"); - - mdev->ofdev.dev.power.power_state = pm_state; - - return 0; -} - - -static int pmz_resume(struct macio_dev *mdev) -{ - struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); - struct uart_state *state; - unsigned long flags; - int pwr_delay = 0; - - if (uap == NULL) - return 0; - - if (mdev->ofdev.dev.power.power_state.event == PM_EVENT_ON) - return 0; - - pmz_debug("resume, switching to state 0\n"); - - state = pmz_uart_reg.state + uap->port.line; - - mutex_lock(&pmz_irq_mutex); - mutex_lock(&state->port.mutex); - - spin_lock_irqsave(&uap->port.lock, flags); - if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) { - spin_unlock_irqrestore(&uap->port.lock, flags); - goto bail; - } - pwr_delay = __pmz_startup(uap); - - /* Take care of config that may have changed while asleep */ - __pmz_set_termios(&uap->port, &uap->termios_cache, NULL); - - if (ZS_IS_OPEN(uap)) { - /* Enable interrupts */ - uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB; - if (!ZS_IS_EXTCLK(uap)) - uap->curregs[R1] |= EXT_INT_ENAB; - write_zsreg(uap, R1, uap->curregs[R1]); - } - - spin_unlock_irqrestore(&uap->port.lock, flags); - - if (ZS_IS_CONS(uap)) - uap->port.cons->flags |= CON_ENABLED; - - /* Re-enable IRQ on the controller */ - if (ZS_IS_OPEN(uap) && !ZS_IS_IRQ_ON(pmz_get_port_A(uap))) { - pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON; - enable_irq(uap->port.irq); - } - - bail: - mutex_unlock(&state->port.mutex); - mutex_unlock(&pmz_irq_mutex); - - /* Right now, we deal with delay by blocking here, I'll be - * smarter later on - */ - if (pwr_delay != 0) { - pmz_debug("pmz: delaying %d ms\n", pwr_delay); - msleep(pwr_delay); - } - - pmz_debug("resume, switching complete\n"); - - mdev->ofdev.dev.power.power_state.event = PM_EVENT_ON; - - return 0; -} - -/* - * Probe all ports in the system and build the ports array, we register - * with the serial layer at this point, the macio-type probing is only - * used later to "attach" to the sysfs tree so we get power management - * events - */ -static int __init pmz_probe(void) -{ - struct device_node *node_p, *node_a, *node_b, *np; - int count = 0; - int rc; - - /* - * Find all escc chips in the system - */ - node_p = of_find_node_by_name(NULL, "escc"); - while (node_p) { - /* - * First get channel A/B node pointers - * - * TODO: Add routines with proper locking to do that... - */ - node_a = node_b = NULL; - for (np = NULL; (np = of_get_next_child(node_p, np)) != NULL;) { - if (strncmp(np->name, "ch-a", 4) == 0) - node_a = of_node_get(np); - else if (strncmp(np->name, "ch-b", 4) == 0) - node_b = of_node_get(np); - } - if (!node_a && !node_b) { - of_node_put(node_a); - of_node_put(node_b); - printk(KERN_ERR "pmac_zilog: missing node %c for escc %s\n", - (!node_a) ? 'a' : 'b', node_p->full_name); - goto next; - } - - /* - * Fill basic fields in the port structures - */ - pmz_ports[count].mate = &pmz_ports[count+1]; - pmz_ports[count+1].mate = &pmz_ports[count]; - pmz_ports[count].flags = PMACZILOG_FLAG_IS_CHANNEL_A; - pmz_ports[count].node = node_a; - pmz_ports[count+1].node = node_b; - pmz_ports[count].port.line = count; - pmz_ports[count+1].port.line = count+1; - - /* - * Setup the ports for real - */ - rc = pmz_init_port(&pmz_ports[count]); - if (rc == 0 && node_b != NULL) - rc = pmz_init_port(&pmz_ports[count+1]); - if (rc != 0) { - of_node_put(node_a); - of_node_put(node_b); - memset(&pmz_ports[count], 0, sizeof(struct uart_pmac_port)); - memset(&pmz_ports[count+1], 0, sizeof(struct uart_pmac_port)); - goto next; - } - count += 2; -next: - node_p = of_find_node_by_name(node_p, "escc"); - } - pmz_ports_count = count; - - return 0; -} - -#else - -extern struct platform_device scc_a_pdev, scc_b_pdev; - -static int __init pmz_init_port(struct uart_pmac_port *uap) -{ - struct resource *r_ports; - int irq; - - r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0); - irq = platform_get_irq(uap->node, 0); - if (!r_ports || !irq) - return -ENODEV; - - uap->port.mapbase = r_ports->start; - uap->port.membase = (unsigned char __iomem *) r_ports->start; - uap->port.iotype = UPIO_MEM; - uap->port.irq = irq; - uap->port.uartclk = ZS_CLOCK; - uap->port.fifosize = 1; - uap->port.ops = &pmz_pops; - uap->port.type = PORT_PMAC_ZILOG; - uap->port.flags = 0; - - uap->control_reg = uap->port.membase; - uap->data_reg = uap->control_reg + 4; - uap->port_type = 0; - - pmz_convert_to_zs(uap, CS8, 0, 9600); - - return 0; -} - -static int __init pmz_probe(void) -{ - int err; - - pmz_ports_count = 0; - - pmz_ports[0].mate = &pmz_ports[1]; - pmz_ports[0].port.line = 0; - pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A; - pmz_ports[0].node = &scc_a_pdev; - err = pmz_init_port(&pmz_ports[0]); - if (err) - return err; - pmz_ports_count++; - - pmz_ports[1].mate = &pmz_ports[0]; - pmz_ports[1].port.line = 1; - pmz_ports[1].flags = 0; - pmz_ports[1].node = &scc_b_pdev; - err = pmz_init_port(&pmz_ports[1]); - if (err) - return err; - pmz_ports_count++; - - return 0; -} - -static void pmz_dispose_port(struct uart_pmac_port *uap) -{ - memset(uap, 0, sizeof(struct uart_pmac_port)); -} - -static int __init pmz_attach(struct platform_device *pdev) -{ - int i; - - for (i = 0; i < pmz_ports_count; i++) - if (pmz_ports[i].node == pdev) - return 0; - return -ENODEV; -} - -static int __exit pmz_detach(struct platform_device *pdev) -{ - return 0; -} - -#endif /* !CONFIG_PPC_PMAC */ - -#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE - -static void pmz_console_write(struct console *con, const char *s, unsigned int count); -static int __init pmz_console_setup(struct console *co, char *options); - -static struct console pmz_console = { - .name = PMACZILOG_NAME, - .write = pmz_console_write, - .device = uart_console_device, - .setup = pmz_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &pmz_uart_reg, -}; - -#define PMACZILOG_CONSOLE &pmz_console -#else /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ -#define PMACZILOG_CONSOLE (NULL) -#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ - -/* - * Register the driver, console driver and ports with the serial - * core - */ -static int __init pmz_register(void) -{ - int i, rc; - - pmz_uart_reg.nr = pmz_ports_count; - pmz_uart_reg.cons = PMACZILOG_CONSOLE; - - /* - * Register this driver with the serial core - */ - rc = uart_register_driver(&pmz_uart_reg); - if (rc) - return rc; - - /* - * Register each port with the serial core - */ - for (i = 0; i < pmz_ports_count; i++) { - struct uart_pmac_port *uport = &pmz_ports[i]; - /* NULL node may happen on wallstreet */ - if (uport->node != NULL) - rc = uart_add_one_port(&pmz_uart_reg, &uport->port); - if (rc) - goto err_out; - } - - return 0; -err_out: - while (i-- > 0) { - struct uart_pmac_port *uport = &pmz_ports[i]; - uart_remove_one_port(&pmz_uart_reg, &uport->port); - } - uart_unregister_driver(&pmz_uart_reg); - return rc; -} - -#ifdef CONFIG_PPC_PMAC - -static struct of_device_id pmz_match[] = -{ - { - .name = "ch-a", - }, - { - .name = "ch-b", - }, - {}, -}; -MODULE_DEVICE_TABLE (of, pmz_match); - -static struct macio_driver pmz_driver = { - .driver = { - .name = "pmac_zilog", - .owner = THIS_MODULE, - .of_match_table = pmz_match, - }, - .probe = pmz_attach, - .remove = pmz_detach, - .suspend = pmz_suspend, - .resume = pmz_resume, -}; - -#else - -static struct platform_driver pmz_driver = { - .remove = __exit_p(pmz_detach), - .driver = { - .name = "scc", - .owner = THIS_MODULE, - }, -}; - -#endif /* !CONFIG_PPC_PMAC */ - -static int __init init_pmz(void) -{ - int rc, i; - printk(KERN_INFO "%s\n", version); - - /* - * First, we need to do a direct OF-based probe pass. We - * do that because we want serial console up before the - * macio stuffs calls us back, and since that makes it - * easier to pass the proper number of channels to - * uart_register_driver() - */ - if (pmz_ports_count == 0) - pmz_probe(); - - /* - * Bail early if no port found - */ - if (pmz_ports_count == 0) - return -ENODEV; - - /* - * Now we register with the serial layer - */ - rc = pmz_register(); - if (rc) { - printk(KERN_ERR - "pmac_zilog: Error registering serial device, disabling pmac_zilog.\n" - "pmac_zilog: Did another serial driver already claim the minors?\n"); - /* effectively "pmz_unprobe()" */ - for (i=0; i < pmz_ports_count; i++) - pmz_dispose_port(&pmz_ports[i]); - return rc; - } - - /* - * Then we register the macio driver itself - */ -#ifdef CONFIG_PPC_PMAC - return macio_register_driver(&pmz_driver); -#else - return platform_driver_probe(&pmz_driver, pmz_attach); -#endif -} - -static void __exit exit_pmz(void) -{ - int i; - -#ifdef CONFIG_PPC_PMAC - /* Get rid of macio-driver (detach from macio) */ - macio_unregister_driver(&pmz_driver); -#else - platform_driver_unregister(&pmz_driver); -#endif - - for (i = 0; i < pmz_ports_count; i++) { - struct uart_pmac_port *uport = &pmz_ports[i]; - if (uport->node != NULL) { - uart_remove_one_port(&pmz_uart_reg, &uport->port); - pmz_dispose_port(uport); - } - } - /* Unregister UART driver */ - uart_unregister_driver(&pmz_uart_reg); -} - -#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE - -static void pmz_console_putchar(struct uart_port *port, int ch) -{ - struct uart_pmac_port *uap = (struct uart_pmac_port *)port; - - /* Wait for the transmit buffer to empty. */ - while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) - udelay(5); - write_zsdata(uap, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - */ -static void pmz_console_write(struct console *con, const char *s, unsigned int count) -{ - struct uart_pmac_port *uap = &pmz_ports[con->index]; - unsigned long flags; - - if (ZS_IS_ASLEEP(uap)) - return; - spin_lock_irqsave(&uap->port.lock, flags); - - /* Turn of interrupts and enable the transmitter. */ - write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB); - write_zsreg(uap, R5, uap->curregs[5] | TxENABLE | RTS | DTR); - - uart_console_write(&uap->port, s, count, pmz_console_putchar); - - /* Restore the values in the registers. */ - write_zsreg(uap, R1, uap->curregs[1]); - /* Don't disable the transmitter. */ - - spin_unlock_irqrestore(&uap->port.lock, flags); -} - -/* - * Setup the serial console - */ -static int __init pmz_console_setup(struct console *co, char *options) -{ - struct uart_pmac_port *uap; - struct uart_port *port; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - unsigned long pwr_delay; - - /* - * XServe's default to 57600 bps - */ - if (of_machine_is_compatible("RackMac1,1") - || of_machine_is_compatible("RackMac1,2") - || of_machine_is_compatible("MacRISC4")) - baud = 57600; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= pmz_ports_count) - co->index = 0; - uap = &pmz_ports[co->index]; - if (uap->node == NULL) - return -ENODEV; - port = &uap->port; - - /* - * Mark port as beeing a console - */ - uap->flags |= PMACZILOG_FLAG_IS_CONS; - - /* - * Temporary fix for uart layer who didn't setup the spinlock yet - */ - spin_lock_init(&port->lock); - - /* - * Enable the hardware - */ - pwr_delay = __pmz_startup(uap); - if (pwr_delay) - mdelay(pwr_delay); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static int __init pmz_console_init(void) -{ - /* Probe ports */ - pmz_probe(); - - /* TODO: Autoprobe console based on OF */ - /* pmz_console.index = i; */ - register_console(&pmz_console); - - return 0; - -} -console_initcall(pmz_console_init); -#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ - -module_init(init_pmz); -module_exit(exit_pmz); diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h deleted file mode 100644 index cbc34fbb1b20..000000000000 --- a/drivers/serial/pmac_zilog.h +++ /dev/null @@ -1,396 +0,0 @@ -#ifndef __PMAC_ZILOG_H__ -#define __PMAC_ZILOG_H__ - -#ifdef CONFIG_PPC_PMAC -#define pmz_debug(fmt, arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg) -#define pmz_error(fmt, arg...) dev_err(&uap->dev->ofdev.dev, fmt, ## arg) -#define pmz_info(fmt, arg...) dev_info(&uap->dev->ofdev.dev, fmt, ## arg) -#else -#define pmz_debug(fmt, arg...) dev_dbg(&uap->node->dev, fmt, ## arg) -#define pmz_error(fmt, arg...) dev_err(&uap->node->dev, fmt, ## arg) -#define pmz_info(fmt, arg...) dev_info(&uap->node->dev, fmt, ## arg) -#endif - -/* - * At most 2 ESCCs with 2 ports each - */ -#define MAX_ZS_PORTS 4 - -/* - * We wrap our port structure around the generic uart_port. - */ -#define NUM_ZSREGS 17 - -struct uart_pmac_port { - struct uart_port port; - struct uart_pmac_port *mate; - -#ifdef CONFIG_PPC_PMAC - /* macio_dev for the escc holding this port (maybe be null on - * early inited port) - */ - struct macio_dev *dev; - /* device node to this port, this points to one of 2 childs - * of "escc" node (ie. ch-a or ch-b) - */ - struct device_node *node; -#else - struct platform_device *node; -#endif - - /* Port type as obtained from device tree (IRDA, modem, ...) */ - int port_type; - u8 curregs[NUM_ZSREGS]; - - unsigned int flags; -#define PMACZILOG_FLAG_IS_CONS 0x00000001 -#define PMACZILOG_FLAG_IS_KGDB 0x00000002 -#define PMACZILOG_FLAG_MODEM_STATUS 0x00000004 -#define PMACZILOG_FLAG_IS_CHANNEL_A 0x00000008 -#define PMACZILOG_FLAG_REGS_HELD 0x00000010 -#define PMACZILOG_FLAG_TX_STOPPED 0x00000020 -#define PMACZILOG_FLAG_TX_ACTIVE 0x00000040 -#define PMACZILOG_FLAG_ENABLED 0x00000080 -#define PMACZILOG_FLAG_IS_IRDA 0x00000100 -#define PMACZILOG_FLAG_IS_INTMODEM 0x00000200 -#define PMACZILOG_FLAG_HAS_DMA 0x00000400 -#define PMACZILOG_FLAG_RSRC_REQUESTED 0x00000800 -#define PMACZILOG_FLAG_IS_ASLEEP 0x00001000 -#define PMACZILOG_FLAG_IS_OPEN 0x00002000 -#define PMACZILOG_FLAG_IS_IRQ_ON 0x00004000 -#define PMACZILOG_FLAG_IS_EXTCLK 0x00008000 -#define PMACZILOG_FLAG_BREAK 0x00010000 - - unsigned char parity_mask; - unsigned char prev_status; - - volatile u8 __iomem *control_reg; - volatile u8 __iomem *data_reg; - -#ifdef CONFIG_PPC_PMAC - unsigned int tx_dma_irq; - unsigned int rx_dma_irq; - volatile struct dbdma_regs __iomem *tx_dma_regs; - volatile struct dbdma_regs __iomem *rx_dma_regs; -#endif - - struct ktermios termios_cache; -}; - -#define to_pmz(p) ((struct uart_pmac_port *)(p)) - -static inline struct uart_pmac_port *pmz_get_port_A(struct uart_pmac_port *uap) -{ - if (uap->flags & PMACZILOG_FLAG_IS_CHANNEL_A) - return uap; - return uap->mate; -} - -/* - * Register accessors. Note that we don't need to enforce a recovery - * delay on PCI PowerMac hardware, it's dealt in HW by the MacIO chip, - * though if we try to use this driver on older machines, we might have - * to add it back - */ -static inline u8 read_zsreg(struct uart_pmac_port *port, u8 reg) -{ - if (reg != 0) - writeb(reg, port->control_reg); - return readb(port->control_reg); -} - -static inline void write_zsreg(struct uart_pmac_port *port, u8 reg, u8 value) -{ - if (reg != 0) - writeb(reg, port->control_reg); - writeb(value, port->control_reg); -} - -static inline u8 read_zsdata(struct uart_pmac_port *port) -{ - return readb(port->data_reg); -} - -static inline void write_zsdata(struct uart_pmac_port *port, u8 data) -{ - writeb(data, port->data_reg); -} - -static inline void zssync(struct uart_pmac_port *port) -{ - (void)readb(port->control_reg); -} - -/* Conversion routines to/from brg time constants from/to bits - * per second. - */ -#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) -#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) - -#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */ - -/* The Zilog register set */ - -#define FLAG 0x7e - -/* Write Register 0 */ -#define R0 0 /* Register selects */ -#define R1 1 -#define R2 2 -#define R3 3 -#define R4 4 -#define R5 5 -#define R6 6 -#define R7 7 -#define R8 8 -#define R9 9 -#define R10 10 -#define R11 11 -#define R12 12 -#define R13 13 -#define R14 14 -#define R15 15 -#define R7P 16 - -#define NULLCODE 0 /* Null Code */ -#define POINT_HIGH 0x8 /* Select upper half of registers */ -#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ -#define SEND_ABORT 0x18 /* HDLC Abort */ -#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ -#define RES_Tx_P 0x28 /* Reset TxINT Pending */ -#define ERR_RES 0x30 /* Error Reset */ -#define RES_H_IUS 0x38 /* Reset highest IUS */ - -#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ -#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ -#define RES_EOM_L 0xC0 /* Reset EOM latch */ - -/* Write Register 1 */ - -#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ -#define TxINT_ENAB 0x2 /* Tx Int Enable */ -#define PAR_SPEC 0x4 /* Parity is special condition */ - -#define RxINT_DISAB 0 /* Rx Int Disable */ -#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ -#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ -#define INT_ERR_Rx 0x18 /* Int on error only */ -#define RxINT_MASK 0x18 - -#define WT_RDY_RT 0x20 /* W/Req reflects recv if 1, xmit if 0 */ -#define WT_FN_RDYFN 0x40 /* W/Req pin is DMA request if 1, wait if 0 */ -#define WT_RDY_ENAB 0x80 /* Enable W/Req pin */ - -/* Write Register #2 (Interrupt Vector) */ - -/* Write Register 3 */ - -#define RxENABLE 0x1 /* Rx Enable */ -#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ -#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ -#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ -#define ENT_HM 0x10 /* Enter Hunt Mode */ -#define AUTO_ENAB 0x20 /* Auto Enables */ -#define Rx5 0x0 /* Rx 5 Bits/Character */ -#define Rx7 0x40 /* Rx 7 Bits/Character */ -#define Rx6 0x80 /* Rx 6 Bits/Character */ -#define Rx8 0xc0 /* Rx 8 Bits/Character */ -#define RxN_MASK 0xc0 - -/* Write Register 4 */ - -#define PAR_ENAB 0x1 /* Parity Enable */ -#define PAR_EVEN 0x2 /* Parity Even/Odd* */ - -#define SYNC_ENAB 0 /* Sync Modes Enable */ -#define SB1 0x4 /* 1 stop bit/char */ -#define SB15 0x8 /* 1.5 stop bits/char */ -#define SB2 0xc /* 2 stop bits/char */ -#define SB_MASK 0xc - -#define MONSYNC 0 /* 8 Bit Sync character */ -#define BISYNC 0x10 /* 16 bit sync character */ -#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ -#define EXTSYNC 0x30 /* External Sync Mode */ - -#define X1CLK 0x0 /* x1 clock mode */ -#define X16CLK 0x40 /* x16 clock mode */ -#define X32CLK 0x80 /* x32 clock mode */ -#define X64CLK 0xC0 /* x64 clock mode */ -#define XCLK_MASK 0xC0 - -/* Write Register 5 */ - -#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ -#define RTS 0x2 /* RTS */ -#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ -#define TxENABLE 0x8 /* Tx Enable */ -#define SND_BRK 0x10 /* Send Break */ -#define Tx5 0x0 /* Tx 5 bits (or less)/character */ -#define Tx7 0x20 /* Tx 7 bits/character */ -#define Tx6 0x40 /* Tx 6 bits/character */ -#define Tx8 0x60 /* Tx 8 bits/character */ -#define TxN_MASK 0x60 -#define DTR 0x80 /* DTR */ - -/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ - -/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ - -/* Write Register 7' (Some enhanced feature control) */ -#define ENEXREAD 0x40 /* Enable read of some write registers */ - -/* Write Register 8 (transmit buffer) */ - -/* Write Register 9 (Master interrupt control) */ -#define VIS 1 /* Vector Includes Status */ -#define NV 2 /* No Vector */ -#define DLC 4 /* Disable Lower Chain */ -#define MIE 8 /* Master Interrupt Enable */ -#define STATHI 0x10 /* Status high */ -#define NORESET 0 /* No reset on write to R9 */ -#define CHRB 0x40 /* Reset channel B */ -#define CHRA 0x80 /* Reset channel A */ -#define FHWRES 0xc0 /* Force hardware reset */ - -/* Write Register 10 (misc control bits) */ -#define BIT6 1 /* 6 bit/8bit sync */ -#define LOOPMODE 2 /* SDLC Loop mode */ -#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ -#define MARKIDLE 8 /* Mark/flag on idle */ -#define GAOP 0x10 /* Go active on poll */ -#define NRZ 0 /* NRZ mode */ -#define NRZI 0x20 /* NRZI mode */ -#define FM1 0x40 /* FM1 (transition = 1) */ -#define FM0 0x60 /* FM0 (transition = 0) */ -#define CRCPS 0x80 /* CRC Preset I/O */ - -/* Write Register 11 (Clock Mode control) */ -#define TRxCXT 0 /* TRxC = Xtal output */ -#define TRxCTC 1 /* TRxC = Transmit clock */ -#define TRxCBR 2 /* TRxC = BR Generator Output */ -#define TRxCDP 3 /* TRxC = DPLL output */ -#define TRxCOI 4 /* TRxC O/I */ -#define TCRTxCP 0 /* Transmit clock = RTxC pin */ -#define TCTRxCP 8 /* Transmit clock = TRxC pin */ -#define TCBR 0x10 /* Transmit clock = BR Generator output */ -#define TCDPLL 0x18 /* Transmit clock = DPLL output */ -#define RCRTxCP 0 /* Receive clock = RTxC pin */ -#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ -#define RCBR 0x40 /* Receive clock = BR Generator output */ -#define RCDPLL 0x60 /* Receive clock = DPLL output */ -#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ - -/* Write Register 12 (lower byte of baud rate generator time constant) */ - -/* Write Register 13 (upper byte of baud rate generator time constant) */ - -/* Write Register 14 (Misc control bits) */ -#define BRENAB 1 /* Baud rate generator enable */ -#define BRSRC 2 /* Baud rate generator source */ -#define DTRREQ 4 /* DTR/Request function */ -#define AUTOECHO 8 /* Auto Echo */ -#define LOOPBAK 0x10 /* Local loopback */ -#define SEARCH 0x20 /* Enter search mode */ -#define RMC 0x40 /* Reset missing clock */ -#define DISDPLL 0x60 /* Disable DPLL */ -#define SSBR 0x80 /* Set DPLL source = BR generator */ -#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ -#define SFMM 0xc0 /* Set FM mode */ -#define SNRZI 0xe0 /* Set NRZI mode */ - -/* Write Register 15 (external/status interrupt control) */ -#define EN85C30 1 /* Enable some 85c30-enhanced registers */ -#define ZCIE 2 /* Zero count IE */ -#define ENSTFIFO 4 /* Enable status FIFO (SDLC) */ -#define DCDIE 8 /* DCD IE */ -#define SYNCIE 0x10 /* Sync/hunt IE */ -#define CTSIE 0x20 /* CTS IE */ -#define TxUIE 0x40 /* Tx Underrun/EOM IE */ -#define BRKIE 0x80 /* Break/Abort IE */ - - -/* Read Register 0 */ -#define Rx_CH_AV 0x1 /* Rx Character Available */ -#define ZCOUNT 0x2 /* Zero count */ -#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ -#define DCD 0x8 /* DCD */ -#define SYNC_HUNT 0x10 /* Sync/hunt */ -#define CTS 0x20 /* CTS */ -#define TxEOM 0x40 /* Tx underrun */ -#define BRK_ABRT 0x80 /* Break/Abort */ - -/* Read Register 1 */ -#define ALL_SNT 0x1 /* All sent */ -/* Residue Data for 8 Rx bits/char programmed */ -#define RES3 0x8 /* 0/3 */ -#define RES4 0x4 /* 0/4 */ -#define RES5 0xc /* 0/5 */ -#define RES6 0x2 /* 0/6 */ -#define RES7 0xa /* 0/7 */ -#define RES8 0x6 /* 0/8 */ -#define RES18 0xe /* 1/8 */ -#define RES28 0x0 /* 2/8 */ -/* Special Rx Condition Interrupts */ -#define PAR_ERR 0x10 /* Parity error */ -#define Rx_OVR 0x20 /* Rx Overrun Error */ -#define CRC_ERR 0x40 /* CRC/Framing Error */ -#define END_FR 0x80 /* End of Frame (SDLC) */ - -/* Read Register 2 (channel b only) - Interrupt vector */ -#define CHB_Tx_EMPTY 0x00 -#define CHB_EXT_STAT 0x02 -#define CHB_Rx_AVAIL 0x04 -#define CHB_SPECIAL 0x06 -#define CHA_Tx_EMPTY 0x08 -#define CHA_EXT_STAT 0x0a -#define CHA_Rx_AVAIL 0x0c -#define CHA_SPECIAL 0x0e -#define STATUS_MASK 0x06 - -/* Read Register 3 (interrupt pending register) ch a only */ -#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ -#define CHBTxIP 0x2 /* Channel B Tx IP */ -#define CHBRxIP 0x4 /* Channel B Rx IP */ -#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ -#define CHATxIP 0x10 /* Channel A Tx IP */ -#define CHARxIP 0x20 /* Channel A Rx IP */ - -/* Read Register 8 (receive data register) */ - -/* Read Register 10 (misc status bits) */ -#define ONLOOP 2 /* On loop */ -#define LOOPSEND 0x10 /* Loop sending */ -#define CLK2MIS 0x40 /* Two clocks missing */ -#define CLK1MIS 0x80 /* One clock missing */ - -/* Read Register 12 (lower byte of baud rate generator constant) */ - -/* Read Register 13 (upper byte of baud rate generator constant) */ - -/* Read Register 15 (value of WR 15) */ - -/* Misc macros */ -#define ZS_CLEARERR(port) (write_zsreg(port, 0, ERR_RES)) -#define ZS_CLEARFIFO(port) do { volatile unsigned char garbage; \ - garbage = read_zsdata(port); \ - garbage = read_zsdata(port); \ - garbage = read_zsdata(port); \ - } while(0) - -#define ZS_IS_CONS(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CONS) -#define ZS_IS_KGDB(UP) ((UP)->flags & PMACZILOG_FLAG_IS_KGDB) -#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CHANNEL_A) -#define ZS_REGS_HELD(UP) ((UP)->flags & PMACZILOG_FLAG_REGS_HELD) -#define ZS_TX_STOPPED(UP) ((UP)->flags & PMACZILOG_FLAG_TX_STOPPED) -#define ZS_TX_ACTIVE(UP) ((UP)->flags & PMACZILOG_FLAG_TX_ACTIVE) -#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & PMACZILOG_FLAG_MODEM_STATUS) -#define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA) -#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM) -#define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA) -#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP) -#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN) -#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON) -#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK) - -#endif /* __PMAC_ZILOG_H__ */ diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c deleted file mode 100644 index 0aa75a97531c..000000000000 --- a/drivers/serial/pnx8xxx_uart.c +++ /dev/null @@ -1,854 +0,0 @@ -/* - * UART driver for PNX8XXX SoCs - * - * Author: Per Hallsmark per.hallsmark@mvista.com - * Ported to 2.6 kernel by EmbeddedAlley - * Reworked by Vitaly Wool - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of - * any kind, whether express or implied. - * - */ - -#if defined(CONFIG_SERIAL_PNX8XXX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -/* We'll be using StrongARM sa1100 serial port major/minor */ -#define SERIAL_PNX8XXX_MAJOR 204 -#define MINOR_START 5 - -#define NR_PORTS 2 - -#define PNX8XXX_ISR_PASS_LIMIT 256 - -/* - * Convert from ignore_status_mask or read_status_mask to FIFO - * and interrupt status bits - */ -#define SM_TO_FIFO(x) ((x) >> 10) -#define SM_TO_ISTAT(x) ((x) & 0x000001ff) -#define FIFO_TO_SM(x) ((x) << 10) -#define ISTAT_TO_SM(x) ((x) & 0x000001ff) - -/* - * This is the size of our serial port register set. - */ -#define UART_PORT_SIZE 0x1000 - -/* - * This determines how often we check the modem status signals - * for any change. They generally aren't connected to an IRQ - * so we have to poll them. We also check immediately before - * filling the TX fifo incase CTS has been dropped. - */ -#define MCTRL_TIMEOUT (250*HZ/1000) - -extern struct pnx8xxx_port pnx8xxx_ports[]; - -static inline int serial_in(struct pnx8xxx_port *sport, int offset) -{ - return (__raw_readl(sport->port.membase + offset)); -} - -static inline void serial_out(struct pnx8xxx_port *sport, int offset, int value) -{ - __raw_writel(value, sport->port.membase + offset); -} - -/* - * Handle any change of modem status signal since we were last called. - */ -static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport) -{ - unsigned int status, changed; - - status = sport->port.ops->get_mctrl(&sport->port); - changed = status ^ sport->old_status; - - if (changed == 0) - return; - - sport->old_status = status; - - if (changed & TIOCM_RI) - sport->port.icount.rng++; - if (changed & TIOCM_DSR) - sport->port.icount.dsr++; - if (changed & TIOCM_CAR) - uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); - if (changed & TIOCM_CTS) - uart_handle_cts_change(&sport->port, status & TIOCM_CTS); - - wake_up_interruptible(&sport->port.state->port.delta_msr_wait); -} - -/* - * This is our per-port timeout handler, for checking the - * modem status signals. - */ -static void pnx8xxx_timeout(unsigned long data) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)data; - unsigned long flags; - - if (sport->port.state) { - spin_lock_irqsave(&sport->port.lock, flags); - pnx8xxx_mctrl_check(sport); - spin_unlock_irqrestore(&sport->port.lock, flags); - - mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); - } -} - -/* - * interrupts disabled on entry - */ -static void pnx8xxx_stop_tx(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - u32 ien; - - /* Disable TX intr */ - ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLTX); - - /* Clear all pending TX intr */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX); -} - -/* - * interrupts may not be disabled on entry - */ -static void pnx8xxx_start_tx(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - u32 ien; - - /* Clear all pending TX intr */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX); - - /* Enable TX intr */ - ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, ien | PNX8XXX_UART_INT_ALLTX); -} - -/* - * Interrupts enabled - */ -static void pnx8xxx_stop_rx(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - u32 ien; - - /* Disable RX intr */ - ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLRX); - - /* Clear all pending RX intr */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX); -} - -/* - * Set the modem control timer to fire immediately. - */ -static void pnx8xxx_enable_ms(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - - mod_timer(&sport->timer, jiffies); -} - -static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport) -{ - struct tty_struct *tty = sport->port.state->port.tty; - unsigned int status, ch, flg; - - status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | - ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); - while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) { - ch = serial_in(sport, PNX8XXX_FIFO) & 0xff; - - sport->port.icount.rx++; - - flg = TTY_NORMAL; - - /* - * note that the error handling code is - * out of the main execution path - */ - if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE | - PNX8XXX_UART_FIFO_RXPAR | - PNX8XXX_UART_FIFO_RXBRK) | - ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) { - if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXBRK)) { - status &= ~(FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)); - sport->port.icount.brk++; - if (uart_handle_break(&sport->port)) - goto ignore_char; - } else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)) - sport->port.icount.parity++; - else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE)) - sport->port.icount.frame++; - if (status & ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN)) - sport->port.icount.overrun++; - - status &= sport->port.read_status_mask; - - if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)) - flg = TTY_PARITY; - else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE)) - flg = TTY_FRAME; - -#ifdef SUPPORT_SYSRQ - sport->port.sysrq = 0; -#endif - } - - if (uart_handle_sysrq_char(&sport->port, ch)) - goto ignore_char; - - uart_insert_char(&sport->port, status, - ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN), ch, flg); - - ignore_char: - serial_out(sport, PNX8XXX_LCR, serial_in(sport, PNX8XXX_LCR) | - PNX8XXX_UART_LCR_RX_NEXT); - status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | - ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); - } - tty_flip_buffer_push(tty); -} - -static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport) -{ - struct circ_buf *xmit = &sport->port.state->xmit; - - if (sport->port.x_char) { - serial_out(sport, PNX8XXX_FIFO, sport->port.x_char); - sport->port.icount.tx++; - sport->port.x_char = 0; - return; - } - - /* - * Check the modem control lines before - * transmitting anything. - */ - pnx8xxx_mctrl_check(sport); - - if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { - pnx8xxx_stop_tx(&sport->port); - return; - } - - /* - * TX while bytes available - */ - while (((serial_in(sport, PNX8XXX_FIFO) & - PNX8XXX_UART_FIFO_TXFIFO) >> 16) < 16) { - serial_out(sport, PNX8XXX_FIFO, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - sport->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&sport->port); - - if (uart_circ_empty(xmit)) - pnx8xxx_stop_tx(&sport->port); -} - -static irqreturn_t pnx8xxx_int(int irq, void *dev_id) -{ - struct pnx8xxx_port *sport = dev_id; - unsigned int status; - - spin_lock(&sport->port.lock); - /* Get the interrupts */ - status = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN); - - /* Byte or break signal received */ - if (status & (PNX8XXX_UART_INT_RX | PNX8XXX_UART_INT_BREAK)) - pnx8xxx_rx_chars(sport); - - /* TX holding register empty - transmit a byte */ - if (status & PNX8XXX_UART_INT_TX) - pnx8xxx_tx_chars(sport); - - /* Clear the ISTAT register */ - serial_out(sport, PNX8XXX_ICLR, status); - - spin_unlock(&sport->port.lock); - return IRQ_HANDLED; -} - -/* - * Return TIOCSER_TEMT when transmitter is not busy. - */ -static unsigned int pnx8xxx_tx_empty(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - - return serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA ? 0 : TIOCSER_TEMT; -} - -static unsigned int pnx8xxx_get_mctrl(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - unsigned int mctrl = TIOCM_DSR; - unsigned int msr; - - /* REVISIT */ - - msr = serial_in(sport, PNX8XXX_MCR); - - mctrl |= msr & PNX8XXX_UART_MCR_CTS ? TIOCM_CTS : 0; - mctrl |= msr & PNX8XXX_UART_MCR_DCD ? TIOCM_CAR : 0; - - return mctrl; -} - -static void pnx8xxx_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -#if 0 /* FIXME */ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - unsigned int msr; -#endif -} - -/* - * Interrupts always disabled. - */ -static void pnx8xxx_break_ctl(struct uart_port *port, int break_state) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - unsigned long flags; - unsigned int lcr; - - spin_lock_irqsave(&sport->port.lock, flags); - lcr = serial_in(sport, PNX8XXX_LCR); - if (break_state == -1) - lcr |= PNX8XXX_UART_LCR_TXBREAK; - else - lcr &= ~PNX8XXX_UART_LCR_TXBREAK; - serial_out(sport, PNX8XXX_LCR, lcr); - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -static int pnx8xxx_startup(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - int retval; - - /* - * Allocate the IRQ - */ - retval = request_irq(sport->port.irq, pnx8xxx_int, 0, - "pnx8xxx-uart", sport); - if (retval) - return retval; - - /* - * Finally, clear and enable interrupts - */ - - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX | - PNX8XXX_UART_INT_ALLTX); - - serial_out(sport, PNX8XXX_IEN, serial_in(sport, PNX8XXX_IEN) | - PNX8XXX_UART_INT_ALLRX | - PNX8XXX_UART_INT_ALLTX); - - /* - * Enable modem status interrupts - */ - spin_lock_irq(&sport->port.lock); - pnx8xxx_enable_ms(&sport->port); - spin_unlock_irq(&sport->port.lock); - - return 0; -} - -static void pnx8xxx_shutdown(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - int lcr; - - /* - * Stop our timer. - */ - del_timer_sync(&sport->timer); - - /* - * Disable all interrupts - */ - serial_out(sport, PNX8XXX_IEN, 0); - - /* - * Reset the Tx and Rx FIFOS, disable the break condition - */ - lcr = serial_in(sport, PNX8XXX_LCR); - lcr &= ~PNX8XXX_UART_LCR_TXBREAK; - lcr |= PNX8XXX_UART_LCR_TX_RST | PNX8XXX_UART_LCR_RX_RST; - serial_out(sport, PNX8XXX_LCR, lcr); - - /* - * Clear all interrupts - */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX | - PNX8XXX_UART_INT_ALLTX); - - /* - * Free the interrupt - */ - free_irq(sport->port.irq, sport); -} - -static void -pnx8xxx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - unsigned long flags; - unsigned int lcr_fcr, old_ien, baud, quot; - unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; - - /* - * We only support CS7 and CS8. - */ - while ((termios->c_cflag & CSIZE) != CS7 && - (termios->c_cflag & CSIZE) != CS8) { - termios->c_cflag &= ~CSIZE; - termios->c_cflag |= old_csize; - old_csize = CS8; - } - - if ((termios->c_cflag & CSIZE) == CS8) - lcr_fcr = PNX8XXX_UART_LCR_8BIT; - else - lcr_fcr = 0; - - if (termios->c_cflag & CSTOPB) - lcr_fcr |= PNX8XXX_UART_LCR_2STOPB; - if (termios->c_cflag & PARENB) { - lcr_fcr |= PNX8XXX_UART_LCR_PAREN; - if (!(termios->c_cflag & PARODD)) - lcr_fcr |= PNX8XXX_UART_LCR_PAREVN; - } - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - spin_lock_irqsave(&sport->port.lock, flags); - - sport->port.read_status_mask = ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN) | - ISTAT_TO_SM(PNX8XXX_UART_INT_EMPTY) | - ISTAT_TO_SM(PNX8XXX_UART_INT_RX); - if (termios->c_iflag & INPCK) - sport->port.read_status_mask |= - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR); - if (termios->c_iflag & (BRKINT | PARMRK)) - sport->port.read_status_mask |= - ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK); - - /* - * Characters to ignore - */ - sport->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | - FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR); - if (termios->c_iflag & IGNBRK) { - sport->port.ignore_status_mask |= - ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK); - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= - ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN); - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - sport->port.ignore_status_mask |= - ISTAT_TO_SM(PNX8XXX_UART_INT_RX); - - del_timer_sync(&sport->timer); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * disable interrupts and drain transmitter - */ - old_ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX | - PNX8XXX_UART_INT_ALLRX)); - - while (serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA) - barrier(); - - /* then, disable everything */ - serial_out(sport, PNX8XXX_IEN, 0); - - /* Reset the Rx and Tx FIFOs too */ - lcr_fcr |= PNX8XXX_UART_LCR_TX_RST; - lcr_fcr |= PNX8XXX_UART_LCR_RX_RST; - - /* set the parity, stop bits and data size */ - serial_out(sport, PNX8XXX_LCR, lcr_fcr); - - /* set the baud rate */ - quot -= 1; - serial_out(sport, PNX8XXX_BAUD, quot); - - serial_out(sport, PNX8XXX_ICLR, -1); - - serial_out(sport, PNX8XXX_IEN, old_ien); - - if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) - pnx8xxx_enable_ms(&sport->port); - - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -static const char *pnx8xxx_type(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - - return sport->port.type == PORT_PNX8XXX ? "PNX8XXX" : NULL; -} - -/* - * Release the memory region(s) being used by 'port'. - */ -static void pnx8xxx_release_port(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - - release_mem_region(sport->port.mapbase, UART_PORT_SIZE); -} - -/* - * Request the memory region(s) being used by 'port'. - */ -static int pnx8xxx_request_port(struct uart_port *port) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - return request_mem_region(sport->port.mapbase, UART_PORT_SIZE, - "pnx8xxx-uart") != NULL ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void pnx8xxx_config_port(struct uart_port *port, int flags) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - - if (flags & UART_CONFIG_TYPE && - pnx8xxx_request_port(&sport->port) == 0) - sport->port.type = PORT_PNX8XXX; -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - * The only change we allow are to the flags and type, and - * even then only between PORT_PNX8XXX and PORT_UNKNOWN - */ -static int -pnx8xxx_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_PNX8XXX) - ret = -EINVAL; - if (sport->port.irq != ser->irq) - ret = -EINVAL; - if (ser->io_type != SERIAL_IO_MEM) - ret = -EINVAL; - if (sport->port.uartclk / 16 != ser->baud_base) - ret = -EINVAL; - if ((void *)sport->port.mapbase != ser->iomem_base) - ret = -EINVAL; - if (sport->port.iobase != ser->port) - ret = -EINVAL; - if (ser->hub6 != 0) - ret = -EINVAL; - return ret; -} - -static struct uart_ops pnx8xxx_pops = { - .tx_empty = pnx8xxx_tx_empty, - .set_mctrl = pnx8xxx_set_mctrl, - .get_mctrl = pnx8xxx_get_mctrl, - .stop_tx = pnx8xxx_stop_tx, - .start_tx = pnx8xxx_start_tx, - .stop_rx = pnx8xxx_stop_rx, - .enable_ms = pnx8xxx_enable_ms, - .break_ctl = pnx8xxx_break_ctl, - .startup = pnx8xxx_startup, - .shutdown = pnx8xxx_shutdown, - .set_termios = pnx8xxx_set_termios, - .type = pnx8xxx_type, - .release_port = pnx8xxx_release_port, - .request_port = pnx8xxx_request_port, - .config_port = pnx8xxx_config_port, - .verify_port = pnx8xxx_verify_port, -}; - - -/* - * Setup the PNX8XXX serial ports. - * - * Note also that we support "console=ttySx" where "x" is either 0 or 1. - */ -static void __init pnx8xxx_init_ports(void) -{ - static int first = 1; - int i; - - if (!first) - return; - first = 0; - - for (i = 0; i < NR_PORTS; i++) { - init_timer(&pnx8xxx_ports[i].timer); - pnx8xxx_ports[i].timer.function = pnx8xxx_timeout; - pnx8xxx_ports[i].timer.data = (unsigned long)&pnx8xxx_ports[i]; - pnx8xxx_ports[i].port.ops = &pnx8xxx_pops; - } -} - -#ifdef CONFIG_SERIAL_PNX8XXX_CONSOLE - -static void pnx8xxx_console_putchar(struct uart_port *port, int ch) -{ - struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; - int status; - - do { - /* Wait for UART_TX register to empty */ - status = serial_in(sport, PNX8XXX_FIFO); - } while (status & PNX8XXX_UART_FIFO_TXFIFO); - serial_out(sport, PNX8XXX_FIFO, ch); -} - -/* - * Interrupts are disabled on entering - */static void -pnx8xxx_console_write(struct console *co, const char *s, unsigned int count) -{ - struct pnx8xxx_port *sport = &pnx8xxx_ports[co->index]; - unsigned int old_ien, status; - - /* - * First, save IEN and then disable interrupts - */ - old_ien = serial_in(sport, PNX8XXX_IEN); - serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX | - PNX8XXX_UART_INT_ALLRX)); - - uart_console_write(&sport->port, s, count, pnx8xxx_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore IEN - */ - do { - /* Wait for UART_TX register to empty */ - status = serial_in(sport, PNX8XXX_FIFO); - } while (status & PNX8XXX_UART_FIFO_TXFIFO); - - /* Clear TX and EMPTY interrupt */ - serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_TX | - PNX8XXX_UART_INT_EMPTY); - - serial_out(sport, PNX8XXX_IEN, old_ien); -} - -static int __init -pnx8xxx_console_setup(struct console *co, char *options) -{ - struct pnx8xxx_port *sport; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index == -1 || co->index >= NR_PORTS) - co->index = 0; - sport = &pnx8xxx_ports[co->index]; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&sport->port, co, baud, parity, bits, flow); -} - -static struct uart_driver pnx8xxx_reg; -static struct console pnx8xxx_console = { - .name = "ttyS", - .write = pnx8xxx_console_write, - .device = uart_console_device, - .setup = pnx8xxx_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &pnx8xxx_reg, -}; - -static int __init pnx8xxx_rs_console_init(void) -{ - pnx8xxx_init_ports(); - register_console(&pnx8xxx_console); - return 0; -} -console_initcall(pnx8xxx_rs_console_init); - -#define PNX8XXX_CONSOLE &pnx8xxx_console -#else -#define PNX8XXX_CONSOLE NULL -#endif - -static struct uart_driver pnx8xxx_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyS", - .dev_name = "ttyS", - .major = SERIAL_PNX8XXX_MAJOR, - .minor = MINOR_START, - .nr = NR_PORTS, - .cons = PNX8XXX_CONSOLE, -}; - -static int pnx8xxx_serial_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct pnx8xxx_port *sport = platform_get_drvdata(pdev); - - return uart_suspend_port(&pnx8xxx_reg, &sport->port); -} - -static int pnx8xxx_serial_resume(struct platform_device *pdev) -{ - struct pnx8xxx_port *sport = platform_get_drvdata(pdev); - - return uart_resume_port(&pnx8xxx_reg, &sport->port); -} - -static int pnx8xxx_serial_probe(struct platform_device *pdev) -{ - struct resource *res = pdev->resource; - int i; - - for (i = 0; i < pdev->num_resources; i++, res++) { - if (!(res->flags & IORESOURCE_MEM)) - continue; - - for (i = 0; i < NR_PORTS; i++) { - if (pnx8xxx_ports[i].port.mapbase != res->start) - continue; - - pnx8xxx_ports[i].port.dev = &pdev->dev; - uart_add_one_port(&pnx8xxx_reg, &pnx8xxx_ports[i].port); - platform_set_drvdata(pdev, &pnx8xxx_ports[i]); - break; - } - } - - return 0; -} - -static int pnx8xxx_serial_remove(struct platform_device *pdev) -{ - struct pnx8xxx_port *sport = platform_get_drvdata(pdev); - - platform_set_drvdata(pdev, NULL); - - if (sport) - uart_remove_one_port(&pnx8xxx_reg, &sport->port); - - return 0; -} - -static struct platform_driver pnx8xxx_serial_driver = { - .driver = { - .name = "pnx8xxx-uart", - .owner = THIS_MODULE, - }, - .probe = pnx8xxx_serial_probe, - .remove = pnx8xxx_serial_remove, - .suspend = pnx8xxx_serial_suspend, - .resume = pnx8xxx_serial_resume, -}; - -static int __init pnx8xxx_serial_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: PNX8XXX driver\n"); - - pnx8xxx_init_ports(); - - ret = uart_register_driver(&pnx8xxx_reg); - if (ret == 0) { - ret = platform_driver_register(&pnx8xxx_serial_driver); - if (ret) - uart_unregister_driver(&pnx8xxx_reg); - } - return ret; -} - -static void __exit pnx8xxx_serial_exit(void) -{ - platform_driver_unregister(&pnx8xxx_serial_driver); - uart_unregister_driver(&pnx8xxx_reg); -} - -module_init(pnx8xxx_serial_init); -module_exit(pnx8xxx_serial_exit); - -MODULE_AUTHOR("Embedded Alley Solutions, Inc."); -MODULE_DESCRIPTION("PNX8XXX SoCs serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_PNX8XXX_MAJOR); -MODULE_ALIAS("platform:pnx8xxx-uart"); diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c deleted file mode 100644 index 1102a39b44f5..000000000000 --- a/drivers/serial/pxa.c +++ /dev/null @@ -1,879 +0,0 @@ -/* - * linux/drivers/serial/pxa.c - * - * Based on drivers/serial/8250.c by Russell King. - * - * Author: Nicolas Pitre - * Created: Feb 20, 2003 - * Copyright: (C) 2003 Monta Vista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Note 1: This driver is made separate from the already too overloaded - * 8250.c because it needs some kirks of its own and that'll make it - * easier to add DMA support. - * - * Note 2: I'm too sick of device allocation policies for serial ports. - * If someone else wants to request an "official" allocation of major/minor - * for this driver please be my guest. And don't forget that new hardware - * to come from Intel might have more than 3 or 4 of those UARTs. Let's - * hope for a better port registration and dynamic device allocation scheme - * with the serial core maintainer satisfaction to appear soon. - */ - - -#if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct uart_pxa_port { - struct uart_port port; - unsigned char ier; - unsigned char lcr; - unsigned char mcr; - unsigned int lsr_break_flag; - struct clk *clk; - char *name; -}; - -static inline unsigned int serial_in(struct uart_pxa_port *up, int offset) -{ - offset <<= 2; - return readl(up->port.membase + offset); -} - -static inline void serial_out(struct uart_pxa_port *up, int offset, int value) -{ - offset <<= 2; - writel(value, up->port.membase + offset); -} - -static void serial_pxa_enable_ms(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); -} - -static void serial_pxa_stop_tx(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - - if (up->ier & UART_IER_THRI) { - up->ier &= ~UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -static void serial_pxa_stop_rx(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - - up->ier &= ~UART_IER_RLSI; - up->port.read_status_mask &= ~UART_LSR_DR; - serial_out(up, UART_IER, up->ier); -} - -static inline void receive_chars(struct uart_pxa_port *up, int *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned int ch, flag; - int max_count = 256; - - do { - ch = serial_in(up, UART_RX); - flag = TTY_NORMAL; - up->port.icount.rx++; - - if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE))) { - /* - * For statistics only - */ - if (*status & UART_LSR_BI) { - *status &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (*status & UART_LSR_PE) - up->port.icount.parity++; - else if (*status & UART_LSR_FE) - up->port.icount.frame++; - if (*status & UART_LSR_OE) - up->port.icount.overrun++; - - /* - * Mask off conditions which should be ignored. - */ - *status &= up->port.read_status_mask; - -#ifdef CONFIG_SERIAL_PXA_CONSOLE - if (up->port.line == up->port.cons->index) { - /* Recover the break flag from console xmit */ - *status |= up->lsr_break_flag; - up->lsr_break_flag = 0; - } -#endif - if (*status & UART_LSR_BI) { - flag = TTY_BREAK; - } else if (*status & UART_LSR_PE) - flag = TTY_PARITY; - else if (*status & UART_LSR_FE) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - - uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); - - ignore_char: - *status = serial_in(up, UART_LSR); - } while ((*status & UART_LSR_DR) && (max_count-- > 0)); - tty_flip_buffer_push(tty); -} - -static void transmit_chars(struct uart_pxa_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { - serial_out(up, UART_TX, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - serial_pxa_stop_tx(&up->port); - return; - } - - count = up->port.fifosize / 2; - do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - - if (uart_circ_empty(xmit)) - serial_pxa_stop_tx(&up->port); -} - -static void serial_pxa_start_tx(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - - if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } -} - -static inline void check_modem_status(struct uart_pxa_port *up) -{ - int status; - - status = serial_in(up, UART_MSR); - - if ((status & UART_MSR_ANY_DELTA) == 0) - return; - - if (status & UART_MSR_TERI) - up->port.icount.rng++; - if (status & UART_MSR_DDSR) - up->port.icount.dsr++; - if (status & UART_MSR_DDCD) - uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); - if (status & UART_MSR_DCTS) - uart_handle_cts_change(&up->port, status & UART_MSR_CTS); - - wake_up_interruptible(&up->port.state->port.delta_msr_wait); -} - -/* - * This handles the interrupt from one port. - */ -static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id) -{ - struct uart_pxa_port *up = dev_id; - unsigned int iir, lsr; - - iir = serial_in(up, UART_IIR); - if (iir & UART_IIR_NO_INT) - return IRQ_NONE; - lsr = serial_in(up, UART_LSR); - if (lsr & UART_LSR_DR) - receive_chars(up, &lsr); - check_modem_status(up); - if (lsr & UART_LSR_THRE) - transmit_chars(up); - return IRQ_HANDLED; -} - -static unsigned int serial_pxa_tx_empty(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&up->port.lock, flags); - ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret; -} - -static unsigned int serial_pxa_get_mctrl(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned char status; - unsigned int ret; - - status = serial_in(up, UART_MSR); - - ret = 0; - if (status & UART_MSR_DCD) - ret |= TIOCM_CAR; - if (status & UART_MSR_RI) - ret |= TIOCM_RNG; - if (status & UART_MSR_DSR) - ret |= TIOCM_DSR; - if (status & UART_MSR_CTS) - ret |= TIOCM_CTS; - return ret; -} - -static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned char mcr = 0; - - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - mcr |= up->mcr; - - serial_out(up, UART_MCR, mcr); -} - -static void serial_pxa_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - if (break_state == -1) - up->lcr |= UART_LCR_SBC; - else - up->lcr &= ~UART_LCR_SBC; - serial_out(up, UART_LCR, up->lcr); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -#if 0 -static void serial_pxa_dma_init(struct pxa_uart *up) -{ - up->rxdma = - pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up); - if (up->rxdma < 0) - goto out; - up->txdma = - pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up); - if (up->txdma < 0) - goto err_txdma; - up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL); - if (!up->dmadesc) - goto err_alloc; - - /* ... */ -err_alloc: - pxa_free_dma(up->txdma); -err_rxdma: - pxa_free_dma(up->rxdma); -out: - return; -} -#endif - -static int serial_pxa_startup(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned long flags; - int retval; - - if (port->line == 3) /* HWUART */ - up->mcr |= UART_MCR_AFE; - else - up->mcr = 0; - - up->port.uartclk = clk_get_rate(up->clk); - - /* - * Allocate the IRQ - */ - retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up); - if (retval) - return retval; - - /* - * Clear the FIFO buffers and disable them. - * (they will be reenabled in set_termios()) - */ - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - serial_out(up, UART_FCR, 0); - - /* - * Clear the interrupt registers. - */ - (void) serial_in(up, UART_LSR); - (void) serial_in(up, UART_RX); - (void) serial_in(up, UART_IIR); - (void) serial_in(up, UART_MSR); - - /* - * Now, initialize the UART - */ - serial_out(up, UART_LCR, UART_LCR_WLEN8); - - spin_lock_irqsave(&up->port.lock, flags); - up->port.mctrl |= TIOCM_OUT2; - serial_pxa_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Finally, enable interrupts. Note: Modem status interrupts - * are set via set_termios(), which will be occurring imminently - * anyway, so we don't enable them here. - */ - up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE; - serial_out(up, UART_IER, up->ier); - - /* - * And clear the interrupt registers again for luck. - */ - (void) serial_in(up, UART_LSR); - (void) serial_in(up, UART_RX); - (void) serial_in(up, UART_IIR); - (void) serial_in(up, UART_MSR); - - return 0; -} - -static void serial_pxa_shutdown(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned long flags; - - free_irq(up->port.irq, up); - - /* - * Disable interrupts from this port - */ - up->ier = 0; - serial_out(up, UART_IER, 0); - - spin_lock_irqsave(&up->port.lock, flags); - up->port.mctrl &= ~TIOCM_OUT2; - serial_pxa_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Disable break condition and FIFOs - */ - serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); - serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT); - serial_out(up, UART_FCR, 0); -} - -static void -serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - unsigned char cval, fcr = 0; - unsigned long flags; - unsigned int baud, quot; - unsigned int dll; - - switch (termios->c_cflag & CSIZE) { - case CS5: - cval = UART_LCR_WLEN5; - break; - case CS6: - cval = UART_LCR_WLEN6; - break; - case CS7: - cval = UART_LCR_WLEN7; - break; - default: - case CS8: - cval = UART_LCR_WLEN8; - break; - } - - if (termios->c_cflag & CSTOPB) - cval |= UART_LCR_STOP; - if (termios->c_cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(termios->c_cflag & PARODD)) - cval |= UART_LCR_EPAR; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - if ((up->port.uartclk / quot) < (2400 * 16)) - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1; - else if ((up->port.uartclk / quot) < (230400 * 16)) - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8; - else - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32; - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - /* - * Ensure the port will be enabled. - * This is required especially for serial console. - */ - up->ier |= UART_IER_UUE; - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (termios->c_iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (termios->c_iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; - - /* - * Characters to ignore - */ - up->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; - - /* - * CTS flow control flag and modem status interrupts - */ - up->ier &= ~UART_IER_MSI; - if (UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->ier |= UART_IER_MSI; - - serial_out(up, UART_IER, up->ier); - - if (termios->c_cflag & CRTSCTS) - up->mcr |= UART_MCR_AFE; - else - up->mcr &= ~UART_MCR_AFE; - - serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ - serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ - - /* - * work around Errata #75 according to Intel(R) PXA27x Processor Family - * Specification Update (Nov 2005) - */ - dll = serial_in(up, UART_DLL); - WARN_ON(dll != (quot & 0xff)); - - serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ - serial_out(up, UART_LCR, cval); /* reset DLAB */ - up->lcr = cval; /* Save LCR */ - serial_pxa_set_mctrl(&up->port, up->port.mctrl); - serial_out(up, UART_FCR, fcr); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void -serial_pxa_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - - if (!state) - clk_enable(up->clk); - else - clk_disable(up->clk); -} - -static void serial_pxa_release_port(struct uart_port *port) -{ -} - -static int serial_pxa_request_port(struct uart_port *port) -{ - return 0; -} - -static void serial_pxa_config_port(struct uart_port *port, int flags) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - up->port.type = PORT_PXA; -} - -static int -serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - /* we don't want the core code to modify any port params */ - return -EINVAL; -} - -static const char * -serial_pxa_type(struct uart_port *port) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - return up->name; -} - -static struct uart_pxa_port *serial_pxa_ports[4]; -static struct uart_driver serial_pxa_reg; - -#ifdef CONFIG_SERIAL_PXA_CONSOLE - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -/* - * Wait for transmitter & holding register to empty - */ -static inline void wait_for_xmitr(struct uart_pxa_port *up) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = serial_in(up, UART_LSR); - - if (status & UART_LSR_BI) - up->lsr_break_flag = UART_LSR_BI; - - if (--tmout == 0) - break; - udelay(1); - } while ((status & BOTH_EMPTY) != BOTH_EMPTY); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout && - ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) - udelay(1); - } -} - -static void serial_pxa_console_putchar(struct uart_port *port, int ch) -{ - struct uart_pxa_port *up = (struct uart_pxa_port *)port; - - wait_for_xmitr(up); - serial_out(up, UART_TX, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void -serial_pxa_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_pxa_port *up = serial_pxa_ports[co->index]; - unsigned int ier; - - clk_enable(up->clk); - - /* - * First save the IER then disable the interrupts - */ - ier = serial_in(up, UART_IER); - serial_out(up, UART_IER, UART_IER_UUE); - - uart_console_write(&up->port, s, count, serial_pxa_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - serial_out(up, UART_IER, ier); - - clk_disable(up->clk); -} - -static int __init -serial_pxa_console_setup(struct console *co, char *options) -{ - struct uart_pxa_port *up; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index == -1 || co->index >= serial_pxa_reg.nr) - co->index = 0; - up = serial_pxa_ports[co->index]; - if (!up) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&up->port, co, baud, parity, bits, flow); -} - -static struct console serial_pxa_console = { - .name = "ttyS", - .write = serial_pxa_console_write, - .device = uart_console_device, - .setup = serial_pxa_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &serial_pxa_reg, -}; - -#define PXA_CONSOLE &serial_pxa_console -#else -#define PXA_CONSOLE NULL -#endif - -struct uart_ops serial_pxa_pops = { - .tx_empty = serial_pxa_tx_empty, - .set_mctrl = serial_pxa_set_mctrl, - .get_mctrl = serial_pxa_get_mctrl, - .stop_tx = serial_pxa_stop_tx, - .start_tx = serial_pxa_start_tx, - .stop_rx = serial_pxa_stop_rx, - .enable_ms = serial_pxa_enable_ms, - .break_ctl = serial_pxa_break_ctl, - .startup = serial_pxa_startup, - .shutdown = serial_pxa_shutdown, - .set_termios = serial_pxa_set_termios, - .pm = serial_pxa_pm, - .type = serial_pxa_type, - .release_port = serial_pxa_release_port, - .request_port = serial_pxa_request_port, - .config_port = serial_pxa_config_port, - .verify_port = serial_pxa_verify_port, -}; - -static struct uart_driver serial_pxa_reg = { - .owner = THIS_MODULE, - .driver_name = "PXA serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = 4, - .cons = PXA_CONSOLE, -}; - -#ifdef CONFIG_PM -static int serial_pxa_suspend(struct device *dev) -{ - struct uart_pxa_port *sport = dev_get_drvdata(dev); - - if (sport) - uart_suspend_port(&serial_pxa_reg, &sport->port); - - return 0; -} - -static int serial_pxa_resume(struct device *dev) -{ - struct uart_pxa_port *sport = dev_get_drvdata(dev); - - if (sport) - uart_resume_port(&serial_pxa_reg, &sport->port); - - return 0; -} - -static const struct dev_pm_ops serial_pxa_pm_ops = { - .suspend = serial_pxa_suspend, - .resume = serial_pxa_resume, -}; -#endif - -static int serial_pxa_probe(struct platform_device *dev) -{ - struct uart_pxa_port *sport; - struct resource *mmres, *irqres; - int ret; - - mmres = platform_get_resource(dev, IORESOURCE_MEM, 0); - irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0); - if (!mmres || !irqres) - return -ENODEV; - - sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL); - if (!sport) - return -ENOMEM; - - sport->clk = clk_get(&dev->dev, NULL); - if (IS_ERR(sport->clk)) { - ret = PTR_ERR(sport->clk); - goto err_free; - } - - sport->port.type = PORT_PXA; - sport->port.iotype = UPIO_MEM; - sport->port.mapbase = mmres->start; - sport->port.irq = irqres->start; - sport->port.fifosize = 64; - sport->port.ops = &serial_pxa_pops; - sport->port.line = dev->id; - sport->port.dev = &dev->dev; - sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; - sport->port.uartclk = clk_get_rate(sport->clk); - - switch (dev->id) { - case 0: sport->name = "FFUART"; break; - case 1: sport->name = "BTUART"; break; - case 2: sport->name = "STUART"; break; - case 3: sport->name = "HWUART"; break; - default: - sport->name = "???"; - break; - } - - sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1); - if (!sport->port.membase) { - ret = -ENOMEM; - goto err_clk; - } - - serial_pxa_ports[dev->id] = sport; - - uart_add_one_port(&serial_pxa_reg, &sport->port); - platform_set_drvdata(dev, sport); - - return 0; - - err_clk: - clk_put(sport->clk); - err_free: - kfree(sport); - return ret; -} - -static int serial_pxa_remove(struct platform_device *dev) -{ - struct uart_pxa_port *sport = platform_get_drvdata(dev); - - platform_set_drvdata(dev, NULL); - - uart_remove_one_port(&serial_pxa_reg, &sport->port); - clk_put(sport->clk); - kfree(sport); - - return 0; -} - -static struct platform_driver serial_pxa_driver = { - .probe = serial_pxa_probe, - .remove = serial_pxa_remove, - - .driver = { - .name = "pxa2xx-uart", - .owner = THIS_MODULE, -#ifdef CONFIG_PM - .pm = &serial_pxa_pm_ops, -#endif - }, -}; - -int __init serial_pxa_init(void) -{ - int ret; - - ret = uart_register_driver(&serial_pxa_reg); - if (ret != 0) - return ret; - - ret = platform_driver_register(&serial_pxa_driver); - if (ret != 0) - uart_unregister_driver(&serial_pxa_reg); - - return ret; -} - -void __exit serial_pxa_exit(void) -{ - platform_driver_unregister(&serial_pxa_driver); - uart_unregister_driver(&serial_pxa_reg); -} - -module_init(serial_pxa_init); -module_exit(serial_pxa_exit); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:pxa2xx-uart"); diff --git a/drivers/serial/s3c2400.c b/drivers/serial/s3c2400.c deleted file mode 100644 index fed1a9a1ffb4..000000000000 --- a/drivers/serial/s3c2400.c +++ /dev/null @@ -1,106 +0,0 @@ -/* linux/drivers/serial/s3c240.c - * - * Driver for Samsung SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include - -#include - -#include - -#include -#include - -#include "samsung.h" - -static int s3c2400_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - clk->divisor = 1; - clk->name = "pclk"; - - return 0; -} - -static int s3c2400_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - return 0; -} - -static int s3c2400_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - dbg("s3c2400_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - wr_regl(port, S3C2410_UCON, cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2400_uart_inf = { - .name = "Samsung S3C2400 UART", - .type = PORT_S3C2400, - .fifosize = 16, - .rx_fifomask = S3C2410_UFSTAT_RXMASK, - .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2410_UFSTAT_RXFULL, - .tx_fifofull = S3C2410_UFSTAT_TXFULL, - .tx_fifomask = S3C2410_UFSTAT_TXMASK, - .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, - .get_clksrc = s3c2400_serial_getsource, - .set_clksrc = s3c2400_serial_setsource, - .reset_port = s3c2400_serial_resetport, -}; - -static int s3c2400_serial_probe(struct platform_device *dev) -{ - return s3c24xx_serial_probe(dev, &s3c2400_uart_inf); -} - -static struct platform_driver s3c2400_serial_driver = { - .probe = s3c2400_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2400-uart", - .owner = THIS_MODULE, - }, -}; - -s3c24xx_console_init(&s3c2400_serial_driver, &s3c2400_uart_inf); - -static inline int s3c2400_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2400_serial_driver, &s3c2400_uart_inf); -} - -static inline void s3c2400_serial_exit(void) -{ - platform_driver_unregister(&s3c2400_serial_driver); -} - -module_init(s3c2400_serial_init); -module_exit(s3c2400_serial_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Ben Dooks "); -MODULE_DESCRIPTION("Samsung S3C2400 SoC Serial port driver"); -MODULE_ALIAS("platform:s3c2400-uart"); diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c deleted file mode 100644 index 73f089d3efd6..000000000000 --- a/drivers/serial/s3c2410.c +++ /dev/null @@ -1,118 +0,0 @@ -/* linux/drivers/serial/s3c2410.c - * - * Driver for Samsung S3C2410 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include "samsung.h" - -static int s3c2410_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2410_UCON_UCLK; - else - ucon &= ~S3C2410_UCON_UCLK; - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - -static int s3c2410_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk"; - - return 0; -} - -static int s3c2410_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - dbg("s3c2410_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - wr_regl(port, S3C2410_UCON, cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2410_uart_inf = { - .name = "Samsung S3C2410 UART", - .type = PORT_S3C2410, - .fifosize = 16, - .rx_fifomask = S3C2410_UFSTAT_RXMASK, - .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2410_UFSTAT_RXFULL, - .tx_fifofull = S3C2410_UFSTAT_TXFULL, - .tx_fifomask = S3C2410_UFSTAT_TXMASK, - .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, - .get_clksrc = s3c2410_serial_getsource, - .set_clksrc = s3c2410_serial_setsource, - .reset_port = s3c2410_serial_resetport, -}; - -static int s3c2410_serial_probe(struct platform_device *dev) -{ - return s3c24xx_serial_probe(dev, &s3c2410_uart_inf); -} - -static struct platform_driver s3c2410_serial_driver = { - .probe = s3c2410_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2410-uart", - .owner = THIS_MODULE, - }, -}; - -s3c24xx_console_init(&s3c2410_serial_driver, &s3c2410_uart_inf); - -static int __init s3c2410_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf); -} - -static void __exit s3c2410_serial_exit(void) -{ - platform_driver_unregister(&s3c2410_serial_driver); -} - -module_init(s3c2410_serial_init); -module_exit(s3c2410_serial_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Ben Dooks "); -MODULE_DESCRIPTION("Samsung S3C2410 SoC Serial port driver"); -MODULE_ALIAS("platform:s3c2410-uart"); diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c deleted file mode 100644 index 1700b1a2fb7e..000000000000 --- a/drivers/serial/s3c2412.c +++ /dev/null @@ -1,152 +0,0 @@ -/* linux/drivers/serial/s3c2412.c - * - * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include "samsung.h" - -static int s3c2412_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - ucon &= ~S3C2412_UCON_CLKMASK; - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2440_UCON_UCLK; - else if (strcmp(clk->name, "pclk") == 0) - ucon |= S3C2440_UCON_PCLK; - else if (strcmp(clk->name, "usysclk") == 0) - ucon |= S3C2412_UCON_USYSCLK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c2412_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - switch (ucon & S3C2412_UCON_CLKMASK) { - case S3C2412_UCON_UCLK: - clk->divisor = 1; - clk->name = "uclk"; - break; - - case S3C2412_UCON_PCLK: - case S3C2412_UCON_PCLK2: - clk->divisor = 1; - clk->name = "pclk"; - break; - - case S3C2412_UCON_USYSCLK: - clk->divisor = 1; - clk->name = "usysclk"; - break; - } - - return 0; -} - -static int s3c2412_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("%s: port=%p (%08lx), cfg=%p\n", - __func__, port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= S3C2412_UCON_CLKMASK; - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2412_uart_inf = { - .name = "Samsung S3C2412 UART", - .type = PORT_S3C2412, - .fifosize = 64, - .has_divslot = 1, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c2412_serial_getsource, - .set_clksrc = s3c2412_serial_setsource, - .reset_port = s3c2412_serial_resetport, -}; - -/* device management */ - -static int s3c2412_serial_probe(struct platform_device *dev) -{ - dbg("s3c2440_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c2412_uart_inf); -} - -static struct platform_driver s3c2412_serial_driver = { - .probe = s3c2412_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2412-uart", - .owner = THIS_MODULE, - }, -}; - -s3c24xx_console_init(&s3c2412_serial_driver, &s3c2412_uart_inf); - -static inline int s3c2412_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf); -} - -static inline void s3c2412_serial_exit(void) -{ - platform_driver_unregister(&s3c2412_serial_driver); -} - -module_init(s3c2412_serial_init); -module_exit(s3c2412_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C2412,S3C2413 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks "); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c2412-uart"); diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c deleted file mode 100644 index 094cc3904b13..000000000000 --- a/drivers/serial/s3c2440.c +++ /dev/null @@ -1,181 +0,0 @@ -/* linux/drivers/serial/s3c2440.c - * - * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include "samsung.h" - - -static int s3c2440_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - /* todo - proper fclk<>nonfclk switch. */ - - ucon &= ~S3C2440_UCON_CLKMASK; - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2440_UCON_UCLK; - else if (strcmp(clk->name, "pclk") == 0) - ucon |= S3C2440_UCON_PCLK; - else if (strcmp(clk->name, "fclk") == 0) - ucon |= S3C2440_UCON_FCLK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c2440_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - unsigned long ucon0, ucon1, ucon2; - - switch (ucon & S3C2440_UCON_CLKMASK) { - case S3C2440_UCON_UCLK: - clk->divisor = 1; - clk->name = "uclk"; - break; - - case S3C2440_UCON_PCLK: - case S3C2440_UCON_PCLK2: - clk->divisor = 1; - clk->name = "pclk"; - break; - - case S3C2440_UCON_FCLK: - /* the fun of calculating the uart divisors on - * the s3c2440 */ - - ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); - ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); - ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); - - printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2); - - ucon0 &= S3C2440_UCON0_DIVMASK; - ucon1 &= S3C2440_UCON1_DIVMASK; - ucon2 &= S3C2440_UCON2_DIVMASK; - - if (ucon0 != 0) { - clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 6; - } else if (ucon1 != 0) { - clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 21; - } else if (ucon2 != 0) { - clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 36; - } else { - /* manual calims 44, seems to be 9 */ - clk->divisor = 9; - } - - clk->name = "fclk"; - break; - } - - return 0; -} - -static int s3c2440_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= (S3C2440_UCON0_DIVMASK | (3<<10)); - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2440_uart_inf = { - .name = "Samsung S3C2440 UART", - .type = PORT_S3C2440, - .fifosize = 64, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c2440_serial_getsource, - .set_clksrc = s3c2440_serial_setsource, - .reset_port = s3c2440_serial_resetport, -}; - -/* device management */ - -static int s3c2440_serial_probe(struct platform_device *dev) -{ - dbg("s3c2440_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c2440_uart_inf); -} - -static struct platform_driver s3c2440_serial_driver = { - .probe = s3c2440_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2440-uart", - .owner = THIS_MODULE, - }, -}; - -s3c24xx_console_init(&s3c2440_serial_driver, &s3c2440_uart_inf); - -static int __init s3c2440_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf); -} - -static void __exit s3c2440_serial_exit(void) -{ - platform_driver_unregister(&s3c2440_serial_driver); -} - -module_init(s3c2440_serial_init); -module_exit(s3c2440_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks "); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c2440-uart"); diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c deleted file mode 100644 index fad6083ca427..000000000000 --- a/drivers/serial/s3c24a0.c +++ /dev/null @@ -1,118 +0,0 @@ -/* linux/drivers/serial/s3c24a0.c - * - * Driver for Samsung S3C24A0 SoC onboard UARTs. - * - * Based on drivers/serial/s3c2410.c - * - * Author: Sandeep Patil - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include - -#include "samsung.h" - -static int s3c24a0_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2410_UCON_UCLK; - else - ucon &= ~S3C2410_UCON_UCLK; - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - -static int s3c24a0_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk"; - - return 0; -} - -static int s3c24a0_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - dbg("s3c24a0_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - wr_regl(port, S3C2410_UCON, cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c24a0_uart_inf = { - .name = "Samsung S3C24A0 UART", - .type = PORT_S3C2410, - .fifosize = 16, - .rx_fifomask = S3C24A0_UFSTAT_RXMASK, - .rx_fifoshift = S3C24A0_UFSTAT_RXSHIFT, - .rx_fifofull = S3C24A0_UFSTAT_RXFULL, - .tx_fifofull = S3C24A0_UFSTAT_TXFULL, - .tx_fifomask = S3C24A0_UFSTAT_TXMASK, - .tx_fifoshift = S3C24A0_UFSTAT_TXSHIFT, - .get_clksrc = s3c24a0_serial_getsource, - .set_clksrc = s3c24a0_serial_setsource, - .reset_port = s3c24a0_serial_resetport, -}; - -static int s3c24a0_serial_probe(struct platform_device *dev) -{ - return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf); -} - -static struct platform_driver s3c24a0_serial_driver = { - .probe = s3c24a0_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c24a0-uart", - .owner = THIS_MODULE, - }, -}; - -s3c24xx_console_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf); - -static int __init s3c24a0_serial_init(void) -{ - return s3c24xx_serial_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf); -} - -static void __exit s3c24a0_serial_exit(void) -{ - platform_driver_unregister(&s3c24a0_serial_driver); -} - -module_init(s3c24a0_serial_init); -module_exit(s3c24a0_serial_exit); - diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c deleted file mode 100644 index 4be92ab50058..000000000000 --- a/drivers/serial/s3c6400.c +++ /dev/null @@ -1,152 +0,0 @@ -/* linux/drivers/serial/s3c6400.c - * - * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs. - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -#include "samsung.h" - -static int s3c6400_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (strcmp(clk->name, "uclk0") == 0) { - ucon &= ~S3C6400_UCON_CLKMASK; - ucon |= S3C6400_UCON_UCLK0; - } else if (strcmp(clk->name, "uclk1") == 0) - ucon |= S3C6400_UCON_UCLK1; - else if (strcmp(clk->name, "pclk") == 0) { - /* See notes about transitioning from UCLK to PCLK */ - ucon &= ~S3C6400_UCON_UCLK0; - } else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c6400_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - u32 ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - - switch (ucon & S3C6400_UCON_CLKMASK) { - case S3C6400_UCON_UCLK0: - clk->name = "uclk0"; - break; - - case S3C6400_UCON_UCLK1: - clk->name = "uclk1"; - break; - - case S3C6400_UCON_PCLK: - case S3C6400_UCON_PCLK2: - clk->name = "pclk"; - break; - } - - return 0; -} - -static int s3c6400_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= S3C6400_UCON_CLKMASK; - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c6400_uart_inf = { - .name = "Samsung S3C6400 UART", - .type = PORT_S3C6400, - .fifosize = 64, - .has_divslot = 1, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c6400_serial_getsource, - .set_clksrc = s3c6400_serial_setsource, - .reset_port = s3c6400_serial_resetport, -}; - -/* device management */ - -static int s3c6400_serial_probe(struct platform_device *dev) -{ - dbg("s3c6400_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c6400_uart_inf); -} - -static struct platform_driver s3c6400_serial_driver = { - .probe = s3c6400_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c6400-uart", - .owner = THIS_MODULE, - }, -}; - -s3c24xx_console_init(&s3c6400_serial_driver, &s3c6400_uart_inf); - -static int __init s3c6400_serial_init(void) -{ - return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf); -} - -static void __exit s3c6400_serial_exit(void) -{ - platform_driver_unregister(&s3c6400_serial_driver); -} - -module_init(s3c6400_serial_init); -module_exit(s3c6400_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks "); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c6400-uart"); diff --git a/drivers/serial/s5pv210.c b/drivers/serial/s5pv210.c deleted file mode 100644 index 6ebccd70a707..000000000000 --- a/drivers/serial/s5pv210.c +++ /dev/null @@ -1,162 +0,0 @@ -/* linux/drivers/serial/s5pv210.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on drivers/serial/s3c6400.c - * - * Driver for Samsung S5PV210 SoC UARTs. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include "samsung.h" - -static int s5pv210_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - struct s3c2410_uartcfg *cfg = port->dev->platform_data; - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if ((cfg->clocks_size) == 1) - return 0; - - if (strcmp(clk->name, "pclk") == 0) - ucon &= ~S5PV210_UCON_CLKMASK; - else if (strcmp(clk->name, "uclk1") == 0) - ucon |= S5PV210_UCON_CLKMASK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s5pv210_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - struct s3c2410_uartcfg *cfg = port->dev->platform_data; - u32 ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - - if ((cfg->clocks_size) == 1) - return 0; - - switch (ucon & S5PV210_UCON_CLKMASK) { - case S5PV210_UCON_PCLK: - clk->name = "pclk"; - break; - case S5PV210_UCON_UCLK: - clk->name = "uclk1"; - break; - } - - return 0; -} - -static int s5pv210_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - ucon &= S5PV210_UCON_CLKMASK; - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -#define S5PV210_UART_DEFAULT_INFO(fifo_size) \ - .name = "Samsung S5PV210 UART0", \ - .type = PORT_S3C6400, \ - .fifosize = fifo_size, \ - .has_divslot = 1, \ - .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ - .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ - .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ - .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ - .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ - .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ - .get_clksrc = s5pv210_serial_getsource, \ - .set_clksrc = s5pv210_serial_setsource, \ - .reset_port = s5pv210_serial_resetport - -static struct s3c24xx_uart_info s5p_port_fifo256 = { - S5PV210_UART_DEFAULT_INFO(256), -}; - -static struct s3c24xx_uart_info s5p_port_fifo64 = { - S5PV210_UART_DEFAULT_INFO(64), -}; - -static struct s3c24xx_uart_info s5p_port_fifo16 = { - S5PV210_UART_DEFAULT_INFO(16), -}; - -static struct s3c24xx_uart_info *s5p_uart_inf[] = { - [0] = &s5p_port_fifo256, - [1] = &s5p_port_fifo64, - [2] = &s5p_port_fifo16, - [3] = &s5p_port_fifo16, -}; - -/* device management */ -static int s5p_serial_probe(struct platform_device *pdev) -{ - return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]); -} - -static struct platform_driver s5p_serial_driver = { - .probe = s5p_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s5pv210-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s5pv210_serial_console_init(void) -{ - return s3c24xx_serial_initconsole(&s5p_serial_driver, s5p_uart_inf); -} - -console_initcall(s5pv210_serial_console_init); - -static int __init s5p_serial_init(void) -{ - return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf); -} - -static void __exit s5p_serial_exit(void) -{ - platform_driver_unregister(&s5p_serial_driver); -} - -module_init(s5p_serial_init); -module_exit(s5p_serial_exit); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:s5pv210-uart"); -MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support"); -MODULE_AUTHOR("Thomas Abraham "); diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c deleted file mode 100644 index 2199d819a987..000000000000 --- a/drivers/serial/sa1100.c +++ /dev/null @@ -1,918 +0,0 @@ -/* - * linux/drivers/char/sa1100.c - * - * Driver for SA11x0 serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if defined(CONFIG_SERIAL_SA1100_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -/* We've been assigned a range on the "Low-density serial ports" major */ -#define SERIAL_SA1100_MAJOR 204 -#define MINOR_START 5 - -#define NR_PORTS 3 - -#define SA1100_ISR_PASS_LIMIT 256 - -/* - * Convert from ignore_status_mask or read_status_mask to UTSR[01] - */ -#define SM_TO_UTSR0(x) ((x) & 0xff) -#define SM_TO_UTSR1(x) ((x) >> 8) -#define UTSR0_TO_SM(x) ((x)) -#define UTSR1_TO_SM(x) ((x) << 8) - -#define UART_GET_UTCR0(sport) __raw_readl((sport)->port.membase + UTCR0) -#define UART_GET_UTCR1(sport) __raw_readl((sport)->port.membase + UTCR1) -#define UART_GET_UTCR2(sport) __raw_readl((sport)->port.membase + UTCR2) -#define UART_GET_UTCR3(sport) __raw_readl((sport)->port.membase + UTCR3) -#define UART_GET_UTSR0(sport) __raw_readl((sport)->port.membase + UTSR0) -#define UART_GET_UTSR1(sport) __raw_readl((sport)->port.membase + UTSR1) -#define UART_GET_CHAR(sport) __raw_readl((sport)->port.membase + UTDR) - -#define UART_PUT_UTCR0(sport,v) __raw_writel((v),(sport)->port.membase + UTCR0) -#define UART_PUT_UTCR1(sport,v) __raw_writel((v),(sport)->port.membase + UTCR1) -#define UART_PUT_UTCR2(sport,v) __raw_writel((v),(sport)->port.membase + UTCR2) -#define UART_PUT_UTCR3(sport,v) __raw_writel((v),(sport)->port.membase + UTCR3) -#define UART_PUT_UTSR0(sport,v) __raw_writel((v),(sport)->port.membase + UTSR0) -#define UART_PUT_UTSR1(sport,v) __raw_writel((v),(sport)->port.membase + UTSR1) -#define UART_PUT_CHAR(sport,v) __raw_writel((v),(sport)->port.membase + UTDR) - -/* - * This is the size of our serial port register set. - */ -#define UART_PORT_SIZE 0x24 - -/* - * This determines how often we check the modem status signals - * for any change. They generally aren't connected to an IRQ - * so we have to poll them. We also check immediately before - * filling the TX fifo incase CTS has been dropped. - */ -#define MCTRL_TIMEOUT (250*HZ/1000) - -struct sa1100_port { - struct uart_port port; - struct timer_list timer; - unsigned int old_status; -}; - -/* - * Handle any change of modem status signal since we were last called. - */ -static void sa1100_mctrl_check(struct sa1100_port *sport) -{ - unsigned int status, changed; - - status = sport->port.ops->get_mctrl(&sport->port); - changed = status ^ sport->old_status; - - if (changed == 0) - return; - - sport->old_status = status; - - if (changed & TIOCM_RI) - sport->port.icount.rng++; - if (changed & TIOCM_DSR) - sport->port.icount.dsr++; - if (changed & TIOCM_CAR) - uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); - if (changed & TIOCM_CTS) - uart_handle_cts_change(&sport->port, status & TIOCM_CTS); - - wake_up_interruptible(&sport->port.state->port.delta_msr_wait); -} - -/* - * This is our per-port timeout handler, for checking the - * modem status signals. - */ -static void sa1100_timeout(unsigned long data) -{ - struct sa1100_port *sport = (struct sa1100_port *)data; - unsigned long flags; - - if (sport->port.state) { - spin_lock_irqsave(&sport->port.lock, flags); - sa1100_mctrl_check(sport); - spin_unlock_irqrestore(&sport->port.lock, flags); - - mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); - } -} - -/* - * interrupts disabled on entry - */ -static void sa1100_stop_tx(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - u32 utcr3; - - utcr3 = UART_GET_UTCR3(sport); - UART_PUT_UTCR3(sport, utcr3 & ~UTCR3_TIE); - sport->port.read_status_mask &= ~UTSR0_TO_SM(UTSR0_TFS); -} - -/* - * port locked and interrupts disabled - */ -static void sa1100_start_tx(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - u32 utcr3; - - utcr3 = UART_GET_UTCR3(sport); - sport->port.read_status_mask |= UTSR0_TO_SM(UTSR0_TFS); - UART_PUT_UTCR3(sport, utcr3 | UTCR3_TIE); -} - -/* - * Interrupts enabled - */ -static void sa1100_stop_rx(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - u32 utcr3; - - utcr3 = UART_GET_UTCR3(sport); - UART_PUT_UTCR3(sport, utcr3 & ~UTCR3_RIE); -} - -/* - * Set the modem control timer to fire immediately. - */ -static void sa1100_enable_ms(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - - mod_timer(&sport->timer, jiffies); -} - -static void -sa1100_rx_chars(struct sa1100_port *sport) -{ - struct tty_struct *tty = sport->port.state->port.tty; - unsigned int status, ch, flg; - - status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) | - UTSR0_TO_SM(UART_GET_UTSR0(sport)); - while (status & UTSR1_TO_SM(UTSR1_RNE)) { - ch = UART_GET_CHAR(sport); - - sport->port.icount.rx++; - - flg = TTY_NORMAL; - - /* - * note that the error handling code is - * out of the main execution path - */ - if (status & UTSR1_TO_SM(UTSR1_PRE | UTSR1_FRE | UTSR1_ROR)) { - if (status & UTSR1_TO_SM(UTSR1_PRE)) - sport->port.icount.parity++; - else if (status & UTSR1_TO_SM(UTSR1_FRE)) - sport->port.icount.frame++; - if (status & UTSR1_TO_SM(UTSR1_ROR)) - sport->port.icount.overrun++; - - status &= sport->port.read_status_mask; - - if (status & UTSR1_TO_SM(UTSR1_PRE)) - flg = TTY_PARITY; - else if (status & UTSR1_TO_SM(UTSR1_FRE)) - flg = TTY_FRAME; - -#ifdef SUPPORT_SYSRQ - sport->port.sysrq = 0; -#endif - } - - if (uart_handle_sysrq_char(&sport->port, ch)) - goto ignore_char; - - uart_insert_char(&sport->port, status, UTSR1_TO_SM(UTSR1_ROR), ch, flg); - - ignore_char: - status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) | - UTSR0_TO_SM(UART_GET_UTSR0(sport)); - } - tty_flip_buffer_push(tty); -} - -static void sa1100_tx_chars(struct sa1100_port *sport) -{ - struct circ_buf *xmit = &sport->port.state->xmit; - - if (sport->port.x_char) { - UART_PUT_CHAR(sport, sport->port.x_char); - sport->port.icount.tx++; - sport->port.x_char = 0; - return; - } - - /* - * Check the modem control lines before - * transmitting anything. - */ - sa1100_mctrl_check(sport); - - if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { - sa1100_stop_tx(&sport->port); - return; - } - - /* - * Tried using FIFO (not checking TNF) for fifo fill: - * still had the '4 bytes repeated' problem. - */ - while (UART_GET_UTSR1(sport) & UTSR1_TNF) { - UART_PUT_CHAR(sport, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - sport->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&sport->port); - - if (uart_circ_empty(xmit)) - sa1100_stop_tx(&sport->port); -} - -static irqreturn_t sa1100_int(int irq, void *dev_id) -{ - struct sa1100_port *sport = dev_id; - unsigned int status, pass_counter = 0; - - spin_lock(&sport->port.lock); - status = UART_GET_UTSR0(sport); - status &= SM_TO_UTSR0(sport->port.read_status_mask) | ~UTSR0_TFS; - do { - if (status & (UTSR0_RFS | UTSR0_RID)) { - /* Clear the receiver idle bit, if set */ - if (status & UTSR0_RID) - UART_PUT_UTSR0(sport, UTSR0_RID); - sa1100_rx_chars(sport); - } - - /* Clear the relevant break bits */ - if (status & (UTSR0_RBB | UTSR0_REB)) - UART_PUT_UTSR0(sport, status & (UTSR0_RBB | UTSR0_REB)); - - if (status & UTSR0_RBB) - sport->port.icount.brk++; - - if (status & UTSR0_REB) - uart_handle_break(&sport->port); - - if (status & UTSR0_TFS) - sa1100_tx_chars(sport); - if (pass_counter++ > SA1100_ISR_PASS_LIMIT) - break; - status = UART_GET_UTSR0(sport); - status &= SM_TO_UTSR0(sport->port.read_status_mask) | - ~UTSR0_TFS; - } while (status & (UTSR0_TFS | UTSR0_RFS | UTSR0_RID)); - spin_unlock(&sport->port.lock); - - return IRQ_HANDLED; -} - -/* - * Return TIOCSER_TEMT when transmitter is not busy. - */ -static unsigned int sa1100_tx_empty(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - - return UART_GET_UTSR1(sport) & UTSR1_TBY ? 0 : TIOCSER_TEMT; -} - -static unsigned int sa1100_get_mctrl(struct uart_port *port) -{ - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; -} - -static void sa1100_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -/* - * Interrupts always disabled. - */ -static void sa1100_break_ctl(struct uart_port *port, int break_state) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - unsigned long flags; - unsigned int utcr3; - - spin_lock_irqsave(&sport->port.lock, flags); - utcr3 = UART_GET_UTCR3(sport); - if (break_state == -1) - utcr3 |= UTCR3_BRK; - else - utcr3 &= ~UTCR3_BRK; - UART_PUT_UTCR3(sport, utcr3); - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -static int sa1100_startup(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - int retval; - - /* - * Allocate the IRQ - */ - retval = request_irq(sport->port.irq, sa1100_int, 0, - "sa11x0-uart", sport); - if (retval) - return retval; - - /* - * Finally, clear and enable interrupts - */ - UART_PUT_UTSR0(sport, -1); - UART_PUT_UTCR3(sport, UTCR3_RXE | UTCR3_TXE | UTCR3_RIE); - - /* - * Enable modem status interrupts - */ - spin_lock_irq(&sport->port.lock); - sa1100_enable_ms(&sport->port); - spin_unlock_irq(&sport->port.lock); - - return 0; -} - -static void sa1100_shutdown(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - - /* - * Stop our timer. - */ - del_timer_sync(&sport->timer); - - /* - * Free the interrupt - */ - free_irq(sport->port.irq, sport); - - /* - * Disable all interrupts, port and break condition. - */ - UART_PUT_UTCR3(sport, 0); -} - -static void -sa1100_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - unsigned long flags; - unsigned int utcr0, old_utcr3, baud, quot; - unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; - - /* - * We only support CS7 and CS8. - */ - while ((termios->c_cflag & CSIZE) != CS7 && - (termios->c_cflag & CSIZE) != CS8) { - termios->c_cflag &= ~CSIZE; - termios->c_cflag |= old_csize; - old_csize = CS8; - } - - if ((termios->c_cflag & CSIZE) == CS8) - utcr0 = UTCR0_DSS; - else - utcr0 = 0; - - if (termios->c_cflag & CSTOPB) - utcr0 |= UTCR0_SBS; - if (termios->c_cflag & PARENB) { - utcr0 |= UTCR0_PE; - if (!(termios->c_cflag & PARODD)) - utcr0 |= UTCR0_OES; - } - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - spin_lock_irqsave(&sport->port.lock, flags); - - sport->port.read_status_mask &= UTSR0_TO_SM(UTSR0_TFS); - sport->port.read_status_mask |= UTSR1_TO_SM(UTSR1_ROR); - if (termios->c_iflag & INPCK) - sport->port.read_status_mask |= - UTSR1_TO_SM(UTSR1_FRE | UTSR1_PRE); - if (termios->c_iflag & (BRKINT | PARMRK)) - sport->port.read_status_mask |= - UTSR0_TO_SM(UTSR0_RBB | UTSR0_REB); - - /* - * Characters to ignore - */ - sport->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= - UTSR1_TO_SM(UTSR1_FRE | UTSR1_PRE); - if (termios->c_iflag & IGNBRK) { - sport->port.ignore_status_mask |= - UTSR0_TO_SM(UTSR0_RBB | UTSR0_REB); - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - sport->port.ignore_status_mask |= - UTSR1_TO_SM(UTSR1_ROR); - } - - del_timer_sync(&sport->timer); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * disable interrupts and drain transmitter - */ - old_utcr3 = UART_GET_UTCR3(sport); - UART_PUT_UTCR3(sport, old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)); - - while (UART_GET_UTSR1(sport) & UTSR1_TBY) - barrier(); - - /* then, disable everything */ - UART_PUT_UTCR3(sport, 0); - - /* set the parity, stop bits and data size */ - UART_PUT_UTCR0(sport, utcr0); - - /* set the baud rate */ - quot -= 1; - UART_PUT_UTCR1(sport, ((quot & 0xf00) >> 8)); - UART_PUT_UTCR2(sport, (quot & 0xff)); - - UART_PUT_UTSR0(sport, -1); - - UART_PUT_UTCR3(sport, old_utcr3); - - if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) - sa1100_enable_ms(&sport->port); - - spin_unlock_irqrestore(&sport->port.lock, flags); -} - -static const char *sa1100_type(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - - return sport->port.type == PORT_SA1100 ? "SA1100" : NULL; -} - -/* - * Release the memory region(s) being used by 'port'. - */ -static void sa1100_release_port(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - - release_mem_region(sport->port.mapbase, UART_PORT_SIZE); -} - -/* - * Request the memory region(s) being used by 'port'. - */ -static int sa1100_request_port(struct uart_port *port) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - - return request_mem_region(sport->port.mapbase, UART_PORT_SIZE, - "sa11x0-uart") != NULL ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void sa1100_config_port(struct uart_port *port, int flags) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - - if (flags & UART_CONFIG_TYPE && - sa1100_request_port(&sport->port) == 0) - sport->port.type = PORT_SA1100; -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - * The only change we allow are to the flags and type, and - * even then only between PORT_SA1100 and PORT_UNKNOWN - */ -static int -sa1100_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_SA1100) - ret = -EINVAL; - if (sport->port.irq != ser->irq) - ret = -EINVAL; - if (ser->io_type != SERIAL_IO_MEM) - ret = -EINVAL; - if (sport->port.uartclk / 16 != ser->baud_base) - ret = -EINVAL; - if ((void *)sport->port.mapbase != ser->iomem_base) - ret = -EINVAL; - if (sport->port.iobase != ser->port) - ret = -EINVAL; - if (ser->hub6 != 0) - ret = -EINVAL; - return ret; -} - -static struct uart_ops sa1100_pops = { - .tx_empty = sa1100_tx_empty, - .set_mctrl = sa1100_set_mctrl, - .get_mctrl = sa1100_get_mctrl, - .stop_tx = sa1100_stop_tx, - .start_tx = sa1100_start_tx, - .stop_rx = sa1100_stop_rx, - .enable_ms = sa1100_enable_ms, - .break_ctl = sa1100_break_ctl, - .startup = sa1100_startup, - .shutdown = sa1100_shutdown, - .set_termios = sa1100_set_termios, - .type = sa1100_type, - .release_port = sa1100_release_port, - .request_port = sa1100_request_port, - .config_port = sa1100_config_port, - .verify_port = sa1100_verify_port, -}; - -static struct sa1100_port sa1100_ports[NR_PORTS]; - -/* - * Setup the SA1100 serial ports. Note that we don't include the IrDA - * port here since we have our own SIR/FIR driver (see drivers/net/irda) - * - * Note also that we support "console=ttySAx" where "x" is either 0 or 1. - * Which serial port this ends up being depends on the machine you're - * running this kernel on. I'm not convinced that this is a good idea, - * but that's the way it traditionally works. - * - * Note that NanoEngine UART3 becomes UART2, and UART2 is no longer - * used here. - */ -static void __init sa1100_init_ports(void) -{ - static int first = 1; - int i; - - if (!first) - return; - first = 0; - - for (i = 0; i < NR_PORTS; i++) { - sa1100_ports[i].port.uartclk = 3686400; - sa1100_ports[i].port.ops = &sa1100_pops; - sa1100_ports[i].port.fifosize = 8; - sa1100_ports[i].port.line = i; - sa1100_ports[i].port.iotype = UPIO_MEM; - init_timer(&sa1100_ports[i].timer); - sa1100_ports[i].timer.function = sa1100_timeout; - sa1100_ports[i].timer.data = (unsigned long)&sa1100_ports[i]; - } - - /* - * make transmit lines outputs, so that when the port - * is closed, the output is in the MARK state. - */ - PPDR |= PPC_TXD1 | PPC_TXD3; - PPSR |= PPC_TXD1 | PPC_TXD3; -} - -void __devinit sa1100_register_uart_fns(struct sa1100_port_fns *fns) -{ - if (fns->get_mctrl) - sa1100_pops.get_mctrl = fns->get_mctrl; - if (fns->set_mctrl) - sa1100_pops.set_mctrl = fns->set_mctrl; - - sa1100_pops.pm = fns->pm; - sa1100_pops.set_wake = fns->set_wake; -} - -void __init sa1100_register_uart(int idx, int port) -{ - if (idx >= NR_PORTS) { - printk(KERN_ERR "%s: bad index number %d\n", __func__, idx); - return; - } - - switch (port) { - case 1: - sa1100_ports[idx].port.membase = (void __iomem *)&Ser1UTCR0; - sa1100_ports[idx].port.mapbase = _Ser1UTCR0; - sa1100_ports[idx].port.irq = IRQ_Ser1UART; - sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; - break; - - case 2: - sa1100_ports[idx].port.membase = (void __iomem *)&Ser2UTCR0; - sa1100_ports[idx].port.mapbase = _Ser2UTCR0; - sa1100_ports[idx].port.irq = IRQ_Ser2ICP; - sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; - break; - - case 3: - sa1100_ports[idx].port.membase = (void __iomem *)&Ser3UTCR0; - sa1100_ports[idx].port.mapbase = _Ser3UTCR0; - sa1100_ports[idx].port.irq = IRQ_Ser3UART; - sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; - break; - - default: - printk(KERN_ERR "%s: bad port number %d\n", __func__, port); - } -} - - -#ifdef CONFIG_SERIAL_SA1100_CONSOLE -static void sa1100_console_putchar(struct uart_port *port, int ch) -{ - struct sa1100_port *sport = (struct sa1100_port *)port; - - while (!(UART_GET_UTSR1(sport) & UTSR1_TNF)) - barrier(); - UART_PUT_CHAR(sport, ch); -} - -/* - * Interrupts are disabled on entering - */ -static void -sa1100_console_write(struct console *co, const char *s, unsigned int count) -{ - struct sa1100_port *sport = &sa1100_ports[co->index]; - unsigned int old_utcr3, status; - - /* - * First, save UTCR3 and then disable interrupts - */ - old_utcr3 = UART_GET_UTCR3(sport); - UART_PUT_UTCR3(sport, (old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)) | - UTCR3_TXE); - - uart_console_write(&sport->port, s, count, sa1100_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore UTCR3 - */ - do { - status = UART_GET_UTSR1(sport); - } while (status & UTSR1_TBY); - UART_PUT_UTCR3(sport, old_utcr3); -} - -/* - * If the port was already initialised (eg, by a boot loader), - * try to determine the current setup. - */ -static void __init -sa1100_console_get_options(struct sa1100_port *sport, int *baud, - int *parity, int *bits) -{ - unsigned int utcr3; - - utcr3 = UART_GET_UTCR3(sport) & (UTCR3_RXE | UTCR3_TXE); - if (utcr3 == (UTCR3_RXE | UTCR3_TXE)) { - /* ok, the port was enabled */ - unsigned int utcr0, quot; - - utcr0 = UART_GET_UTCR0(sport); - - *parity = 'n'; - if (utcr0 & UTCR0_PE) { - if (utcr0 & UTCR0_OES) - *parity = 'e'; - else - *parity = 'o'; - } - - if (utcr0 & UTCR0_DSS) - *bits = 8; - else - *bits = 7; - - quot = UART_GET_UTCR2(sport) | UART_GET_UTCR1(sport) << 8; - quot &= 0xfff; - *baud = sport->port.uartclk / (16 * (quot + 1)); - } -} - -static int __init -sa1100_console_setup(struct console *co, char *options) -{ - struct sa1100_port *sport; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index == -1 || co->index >= NR_PORTS) - co->index = 0; - sport = &sa1100_ports[co->index]; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - sa1100_console_get_options(sport, &baud, &parity, &bits); - - return uart_set_options(&sport->port, co, baud, parity, bits, flow); -} - -static struct uart_driver sa1100_reg; -static struct console sa1100_console = { - .name = "ttySA", - .write = sa1100_console_write, - .device = uart_console_device, - .setup = sa1100_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sa1100_reg, -}; - -static int __init sa1100_rs_console_init(void) -{ - sa1100_init_ports(); - register_console(&sa1100_console); - return 0; -} -console_initcall(sa1100_rs_console_init); - -#define SA1100_CONSOLE &sa1100_console -#else -#define SA1100_CONSOLE NULL -#endif - -static struct uart_driver sa1100_reg = { - .owner = THIS_MODULE, - .driver_name = "ttySA", - .dev_name = "ttySA", - .major = SERIAL_SA1100_MAJOR, - .minor = MINOR_START, - .nr = NR_PORTS, - .cons = SA1100_CONSOLE, -}; - -static int sa1100_serial_suspend(struct platform_device *dev, pm_message_t state) -{ - struct sa1100_port *sport = platform_get_drvdata(dev); - - if (sport) - uart_suspend_port(&sa1100_reg, &sport->port); - - return 0; -} - -static int sa1100_serial_resume(struct platform_device *dev) -{ - struct sa1100_port *sport = platform_get_drvdata(dev); - - if (sport) - uart_resume_port(&sa1100_reg, &sport->port); - - return 0; -} - -static int sa1100_serial_probe(struct platform_device *dev) -{ - struct resource *res = dev->resource; - int i; - - for (i = 0; i < dev->num_resources; i++, res++) - if (res->flags & IORESOURCE_MEM) - break; - - if (i < dev->num_resources) { - for (i = 0; i < NR_PORTS; i++) { - if (sa1100_ports[i].port.mapbase != res->start) - continue; - - sa1100_ports[i].port.dev = &dev->dev; - uart_add_one_port(&sa1100_reg, &sa1100_ports[i].port); - platform_set_drvdata(dev, &sa1100_ports[i]); - break; - } - } - - return 0; -} - -static int sa1100_serial_remove(struct platform_device *pdev) -{ - struct sa1100_port *sport = platform_get_drvdata(pdev); - - platform_set_drvdata(pdev, NULL); - - if (sport) - uart_remove_one_port(&sa1100_reg, &sport->port); - - return 0; -} - -static struct platform_driver sa11x0_serial_driver = { - .probe = sa1100_serial_probe, - .remove = sa1100_serial_remove, - .suspend = sa1100_serial_suspend, - .resume = sa1100_serial_resume, - .driver = { - .name = "sa11x0-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init sa1100_serial_init(void) -{ - int ret; - - printk(KERN_INFO "Serial: SA11x0 driver\n"); - - sa1100_init_ports(); - - ret = uart_register_driver(&sa1100_reg); - if (ret == 0) { - ret = platform_driver_register(&sa11x0_serial_driver); - if (ret) - uart_unregister_driver(&sa1100_reg); - } - return ret; -} - -static void __exit sa1100_serial_exit(void) -{ - platform_driver_unregister(&sa11x0_serial_driver); - uart_unregister_driver(&sa1100_reg); -} - -module_init(sa1100_serial_init); -module_exit(sa1100_serial_exit); - -MODULE_AUTHOR("Deep Blue Solutions Ltd"); -MODULE_DESCRIPTION("SA1100 generic serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_SA1100_MAJOR); -MODULE_ALIAS("platform:sa11x0-uart"); diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c deleted file mode 100644 index 7ac2bf5167cd..000000000000 --- a/drivers/serial/samsung.c +++ /dev/null @@ -1,1487 +0,0 @@ -/* linux/drivers/serial/samsuing.c - * - * Driver core for Samsung SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Hote on 2410 error handling - * - * The s3c2410 manual has a love/hate affair with the contents of the - * UERSTAT register in the UART blocks, and keeps marking some of the - * error bits as reserved. Having checked with the s3c2410x01, - * it copes with BREAKs properly, so I am happy to ignore the RESERVED - * feature from the latter versions of the manual. - * - * If it becomes aparrent that latter versions of the 2410 remove these - * bits, then action will have to be taken to differentiate the versions - * and change the policy on BREAK - * - * BJD, 04-Nov-2004 -*/ - -#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include - -#include - -#include "samsung.h" - -/* UART name and device definitions */ - -#define S3C24XX_SERIAL_NAME "ttySAC" -#define S3C24XX_SERIAL_MAJOR 204 -#define S3C24XX_SERIAL_MINOR 64 - -/* macros to change one thing to another */ - -#define tx_enabled(port) ((port)->unused[0]) -#define rx_enabled(port) ((port)->unused[1]) - -/* flag to ignore all characters comming in */ -#define RXSTAT_DUMMY_READ (0x10000000) - -static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port) -{ - return container_of(port, struct s3c24xx_uart_port, port); -} - -/* translate a port to the device name */ - -static inline const char *s3c24xx_serial_portname(struct uart_port *port) -{ - return to_platform_device(port->dev)->name; -} - -static int s3c24xx_serial_txempty_nofifo(struct uart_port *port) -{ - return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE); -} - -static void s3c24xx_serial_rx_enable(struct uart_port *port) -{ - unsigned long flags; - unsigned int ucon, ufcon; - int count = 10000; - - spin_lock_irqsave(&port->lock, flags); - - while (--count && !s3c24xx_serial_txempty_nofifo(port)) - udelay(100); - - ufcon = rd_regl(port, S3C2410_UFCON); - ufcon |= S3C2410_UFCON_RESETRX; - wr_regl(port, S3C2410_UFCON, ufcon); - - ucon = rd_regl(port, S3C2410_UCON); - ucon |= S3C2410_UCON_RXIRQMODE; - wr_regl(port, S3C2410_UCON, ucon); - - rx_enabled(port) = 1; - spin_unlock_irqrestore(&port->lock, flags); -} - -static void s3c24xx_serial_rx_disable(struct uart_port *port) -{ - unsigned long flags; - unsigned int ucon; - - spin_lock_irqsave(&port->lock, flags); - - ucon = rd_regl(port, S3C2410_UCON); - ucon &= ~S3C2410_UCON_RXIRQMODE; - wr_regl(port, S3C2410_UCON, ucon); - - rx_enabled(port) = 0; - spin_unlock_irqrestore(&port->lock, flags); -} - -static void s3c24xx_serial_stop_tx(struct uart_port *port) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - - if (tx_enabled(port)) { - disable_irq_nosync(ourport->tx_irq); - tx_enabled(port) = 0; - if (port->flags & UPF_CONS_FLOW) - s3c24xx_serial_rx_enable(port); - } -} - -static void s3c24xx_serial_start_tx(struct uart_port *port) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - - if (!tx_enabled(port)) { - if (port->flags & UPF_CONS_FLOW) - s3c24xx_serial_rx_disable(port); - - enable_irq(ourport->tx_irq); - tx_enabled(port) = 1; - } -} - - -static void s3c24xx_serial_stop_rx(struct uart_port *port) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - - if (rx_enabled(port)) { - dbg("s3c24xx_serial_stop_rx: port=%p\n", port); - disable_irq_nosync(ourport->rx_irq); - rx_enabled(port) = 0; - } -} - -static void s3c24xx_serial_enable_ms(struct uart_port *port) -{ -} - -static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port) -{ - return to_ourport(port)->info; -} - -static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port) -{ - if (port->dev == NULL) - return NULL; - - return (struct s3c2410_uartcfg *)port->dev->platform_data; -} - -static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, - unsigned long ufstat) -{ - struct s3c24xx_uart_info *info = ourport->info; - - if (ufstat & info->rx_fifofull) - return info->fifosize; - - return (ufstat & info->rx_fifomask) >> info->rx_fifoshift; -} - - -/* ? - where has parity gone?? */ -#define S3C2410_UERSTAT_PARITY (0x1000) - -static irqreturn_t -s3c24xx_serial_rx_chars(int irq, void *dev_id) -{ - struct s3c24xx_uart_port *ourport = dev_id; - struct uart_port *port = &ourport->port; - struct tty_struct *tty = port->state->port.tty; - unsigned int ufcon, ch, flag, ufstat, uerstat; - int max_count = 64; - - while (max_count-- > 0) { - ufcon = rd_regl(port, S3C2410_UFCON); - ufstat = rd_regl(port, S3C2410_UFSTAT); - - if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0) - break; - - uerstat = rd_regl(port, S3C2410_UERSTAT); - ch = rd_regb(port, S3C2410_URXH); - - if (port->flags & UPF_CONS_FLOW) { - int txe = s3c24xx_serial_txempty_nofifo(port); - - if (rx_enabled(port)) { - if (!txe) { - rx_enabled(port) = 0; - continue; - } - } else { - if (txe) { - ufcon |= S3C2410_UFCON_RESETRX; - wr_regl(port, S3C2410_UFCON, ufcon); - rx_enabled(port) = 1; - goto out; - } - continue; - } - } - - /* insert the character into the buffer */ - - flag = TTY_NORMAL; - port->icount.rx++; - - if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) { - dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n", - ch, uerstat); - - /* check for break */ - if (uerstat & S3C2410_UERSTAT_BREAK) { - dbg("break!\n"); - port->icount.brk++; - if (uart_handle_break(port)) - goto ignore_char; - } - - if (uerstat & S3C2410_UERSTAT_FRAME) - port->icount.frame++; - if (uerstat & S3C2410_UERSTAT_OVERRUN) - port->icount.overrun++; - - uerstat &= port->read_status_mask; - - if (uerstat & S3C2410_UERSTAT_BREAK) - flag = TTY_BREAK; - else if (uerstat & S3C2410_UERSTAT_PARITY) - flag = TTY_PARITY; - else if (uerstat & (S3C2410_UERSTAT_FRAME | - S3C2410_UERSTAT_OVERRUN)) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, ch)) - goto ignore_char; - - uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, - ch, flag); - - ignore_char: - continue; - } - tty_flip_buffer_push(tty); - - out: - return IRQ_HANDLED; -} - -static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) -{ - struct s3c24xx_uart_port *ourport = id; - struct uart_port *port = &ourport->port; - struct circ_buf *xmit = &port->state->xmit; - int count = 256; - - if (port->x_char) { - wr_regb(port, S3C2410_UTXH, port->x_char); - port->icount.tx++; - port->x_char = 0; - goto out; - } - - /* if there isnt anything more to transmit, or the uart is now - * stopped, disable the uart and exit - */ - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - s3c24xx_serial_stop_tx(port); - goto out; - } - - /* try and drain the buffer... */ - - while (!uart_circ_empty(xmit) && count-- > 0) { - if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull) - break; - - wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - s3c24xx_serial_stop_tx(port); - - out: - return IRQ_HANDLED; -} - -static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); - unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT); - unsigned long ufcon = rd_regl(port, S3C2410_UFCON); - - if (ufcon & S3C2410_UFCON_FIFOMODE) { - if ((ufstat & info->tx_fifomask) != 0 || - (ufstat & info->tx_fifofull)) - return 0; - - return 1; - } - - return s3c24xx_serial_txempty_nofifo(port); -} - -/* no modem control lines */ -static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port) -{ - unsigned int umstat = rd_regb(port, S3C2410_UMSTAT); - - if (umstat & S3C2410_UMSTAT_CTS) - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; - else - return TIOCM_CAR | TIOCM_DSR; -} - -static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* todo - possibly remove AFC and do manual CTS */ -} - -static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) -{ - unsigned long flags; - unsigned int ucon; - - spin_lock_irqsave(&port->lock, flags); - - ucon = rd_regl(port, S3C2410_UCON); - - if (break_state) - ucon |= S3C2410_UCON_SBREAK; - else - ucon &= ~S3C2410_UCON_SBREAK; - - wr_regl(port, S3C2410_UCON, ucon); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void s3c24xx_serial_shutdown(struct uart_port *port) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - - if (ourport->tx_claimed) { - free_irq(ourport->tx_irq, ourport); - tx_enabled(port) = 0; - ourport->tx_claimed = 0; - } - - if (ourport->rx_claimed) { - free_irq(ourport->rx_irq, ourport); - ourport->rx_claimed = 0; - rx_enabled(port) = 0; - } -} - - -static int s3c24xx_serial_startup(struct uart_port *port) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - int ret; - - dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n", - port->mapbase, port->membase); - - rx_enabled(port) = 1; - - ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0, - s3c24xx_serial_portname(port), ourport); - - if (ret != 0) { - printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq); - return ret; - } - - ourport->rx_claimed = 1; - - dbg("requesting tx irq...\n"); - - tx_enabled(port) = 1; - - ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0, - s3c24xx_serial_portname(port), ourport); - - if (ret) { - printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq); - goto err; - } - - ourport->tx_claimed = 1; - - dbg("s3c24xx_serial_startup ok\n"); - - /* the port reset code should have done the correct - * register setup for the port controls */ - - return ret; - - err: - s3c24xx_serial_shutdown(port); - return ret; -} - -/* power power management control */ - -static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, - unsigned int old) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - - ourport->pm_level = level; - - switch (level) { - case 3: - if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL) - clk_disable(ourport->baudclk); - - clk_disable(ourport->clk); - break; - - case 0: - clk_enable(ourport->clk); - - if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL) - clk_enable(ourport->baudclk); - - break; - default: - printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level); - } -} - -/* baud rate calculation - * - * The UARTs on the S3C2410/S3C2440 can take their clocks from a number - * of different sources, including the peripheral clock ("pclk") and an - * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk") - * with a programmable extra divisor. - * - * The following code goes through the clock sources, and calculates the - * baud clocks (and the resultant actual baud rates) and then tries to - * pick the closest one and select that. - * -*/ - - -#define MAX_CLKS (8) - -static struct s3c24xx_uart_clksrc tmp_clksrc = { - .name = "pclk", - .min_baud = 0, - .max_baud = 0, - .divisor = 1, -}; - -static inline int -s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); - - return (info->get_clksrc)(port, c); -} - -static inline int -s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); - - return (info->set_clksrc)(port, c); -} - -struct baud_calc { - struct s3c24xx_uart_clksrc *clksrc; - unsigned int calc; - unsigned int divslot; - unsigned int quot; - struct clk *src; -}; - -static int s3c24xx_serial_calcbaud(struct baud_calc *calc, - struct uart_port *port, - struct s3c24xx_uart_clksrc *clksrc, - unsigned int baud) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - unsigned long rate; - - calc->src = clk_get(port->dev, clksrc->name); - if (calc->src == NULL || IS_ERR(calc->src)) - return 0; - - rate = clk_get_rate(calc->src); - rate /= clksrc->divisor; - - calc->clksrc = clksrc; - - if (ourport->info->has_divslot) { - unsigned long div = rate / baud; - - /* The UDIVSLOT register on the newer UARTs allows us to - * get a divisor adjustment of 1/16th on the baud clock. - * - * We don't keep the UDIVSLOT value (the 16ths we calculated - * by not multiplying the baud by 16) as it is easy enough - * to recalculate. - */ - - calc->quot = div / 16; - calc->calc = rate / div; - } else { - calc->quot = (rate + (8 * baud)) / (16 * baud); - calc->calc = (rate / (calc->quot * 16)); - } - - calc->quot--; - return 1; -} - -static unsigned int s3c24xx_serial_getclk(struct uart_port *port, - struct s3c24xx_uart_clksrc **clksrc, - struct clk **clk, - unsigned int baud) -{ - struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); - struct s3c24xx_uart_clksrc *clkp; - struct baud_calc res[MAX_CLKS]; - struct baud_calc *resptr, *best, *sptr; - int i; - - clkp = cfg->clocks; - best = NULL; - - if (cfg->clocks_size < 2) { - if (cfg->clocks_size == 0) - clkp = &tmp_clksrc; - - /* check to see if we're sourcing fclk, and if so we're - * going to have to update the clock source - */ - - if (strcmp(clkp->name, "fclk") == 0) { - struct s3c24xx_uart_clksrc src; - - s3c24xx_serial_getsource(port, &src); - - /* check that the port already using fclk, and if - * not, then re-select fclk - */ - - if (strcmp(src.name, clkp->name) == 0) { - s3c24xx_serial_setsource(port, clkp); - s3c24xx_serial_getsource(port, &src); - } - - clkp->divisor = src.divisor; - } - - s3c24xx_serial_calcbaud(res, port, clkp, baud); - best = res; - resptr = best + 1; - } else { - resptr = res; - - for (i = 0; i < cfg->clocks_size; i++, clkp++) { - if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud)) - resptr++; - } - } - - /* ok, we now need to select the best clock we found */ - - if (!best) { - unsigned int deviation = (1<<30)|((1<<30)-1); - int calc_deviation; - - for (sptr = res; sptr < resptr; sptr++) { - calc_deviation = baud - sptr->calc; - if (calc_deviation < 0) - calc_deviation = -calc_deviation; - - if (calc_deviation < deviation) { - best = sptr; - deviation = calc_deviation; - } - } - } - - /* store results to pass back */ - - *clksrc = best->clksrc; - *clk = best->src; - - return best->quot; -} - -/* udivslot_table[] - * - * This table takes the fractional value of the baud divisor and gives - * the recommended setting for the UDIVSLOT register. - */ -static u16 udivslot_table[16] = { - [0] = 0x0000, - [1] = 0x0080, - [2] = 0x0808, - [3] = 0x0888, - [4] = 0x2222, - [5] = 0x4924, - [6] = 0x4A52, - [7] = 0x54AA, - [8] = 0x5555, - [9] = 0xD555, - [10] = 0xD5D5, - [11] = 0xDDD5, - [12] = 0xDDDD, - [13] = 0xDFDD, - [14] = 0xDFDF, - [15] = 0xFFDF, -}; - -static void s3c24xx_serial_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); - struct s3c24xx_uart_port *ourport = to_ourport(port); - struct s3c24xx_uart_clksrc *clksrc = NULL; - struct clk *clk = NULL; - unsigned long flags; - unsigned int baud, quot; - unsigned int ulcon; - unsigned int umcon; - unsigned int udivslot = 0; - - /* - * We don't support modem control lines. - */ - termios->c_cflag &= ~(HUPCL | CMSPAR); - termios->c_cflag |= CLOCAL; - - /* - * Ask the core to calculate the divisor for us. - */ - - baud = uart_get_baud_rate(port, termios, old, 0, 115200*8); - - if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) - quot = port->custom_divisor; - else - quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud); - - /* check to see if we need to change clock source */ - - if (ourport->clksrc != clksrc || ourport->baudclk != clk) { - dbg("selecting clock %p\n", clk); - s3c24xx_serial_setsource(port, clksrc); - - if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { - clk_disable(ourport->baudclk); - ourport->baudclk = NULL; - } - - clk_enable(clk); - - ourport->clksrc = clksrc; - ourport->baudclk = clk; - ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; - } - - if (ourport->info->has_divslot) { - unsigned int div = ourport->baudclk_rate / baud; - - if (cfg->has_fracval) { - udivslot = (div & 15); - dbg("fracval = %04x\n", udivslot); - } else { - udivslot = udivslot_table[div & 15]; - dbg("udivslot = %04x (div %d)\n", udivslot, div & 15); - } - } - - switch (termios->c_cflag & CSIZE) { - case CS5: - dbg("config: 5bits/char\n"); - ulcon = S3C2410_LCON_CS5; - break; - case CS6: - dbg("config: 6bits/char\n"); - ulcon = S3C2410_LCON_CS6; - break; - case CS7: - dbg("config: 7bits/char\n"); - ulcon = S3C2410_LCON_CS7; - break; - case CS8: - default: - dbg("config: 8bits/char\n"); - ulcon = S3C2410_LCON_CS8; - break; - } - - /* preserve original lcon IR settings */ - ulcon |= (cfg->ulcon & S3C2410_LCON_IRM); - - if (termios->c_cflag & CSTOPB) - ulcon |= S3C2410_LCON_STOPB; - - umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0; - - if (termios->c_cflag & PARENB) { - if (termios->c_cflag & PARODD) - ulcon |= S3C2410_LCON_PODD; - else - ulcon |= S3C2410_LCON_PEVEN; - } else { - ulcon |= S3C2410_LCON_PNONE; - } - - spin_lock_irqsave(&port->lock, flags); - - dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n", - ulcon, quot, udivslot); - - wr_regl(port, S3C2410_ULCON, ulcon); - wr_regl(port, S3C2410_UBRDIV, quot); - wr_regl(port, S3C2410_UMCON, umcon); - - if (ourport->info->has_divslot) - wr_regl(port, S3C2443_DIVSLOT, udivslot); - - dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", - rd_regl(port, S3C2410_ULCON), - rd_regl(port, S3C2410_UCON), - rd_regl(port, S3C2410_UFCON)); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - /* - * Which character status flags are we interested in? - */ - port->read_status_mask = S3C2410_UERSTAT_OVERRUN; - if (termios->c_iflag & INPCK) - port->read_status_mask |= S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_PARITY; - - /* - * Which character status flags should we ignore? - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN; - if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) - port->ignore_status_mask |= S3C2410_UERSTAT_FRAME; - - /* - * Ignore all characters if CREAD is not set. - */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= RXSTAT_DUMMY_READ; - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *s3c24xx_serial_type(struct uart_port *port) -{ - switch (port->type) { - case PORT_S3C2410: - return "S3C2410"; - case PORT_S3C2440: - return "S3C2440"; - case PORT_S3C2412: - return "S3C2412"; - case PORT_S3C6400: - return "S3C6400/10"; - default: - return NULL; - } -} - -#define MAP_SIZE (0x100) - -static void s3c24xx_serial_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, MAP_SIZE); -} - -static int s3c24xx_serial_request_port(struct uart_port *port) -{ - const char *name = s3c24xx_serial_portname(port); - return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY; -} - -static void s3c24xx_serial_config_port(struct uart_port *port, int flags) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); - - if (flags & UART_CONFIG_TYPE && - s3c24xx_serial_request_port(port) == 0) - port->type = info->type; -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int -s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); - - if (ser->type != PORT_UNKNOWN && ser->type != info->type) - return -EINVAL; - - return 0; -} - - -#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE - -static struct console s3c24xx_serial_console; - -#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console -#else -#define S3C24XX_SERIAL_CONSOLE NULL -#endif - -static struct uart_ops s3c24xx_serial_ops = { - .pm = s3c24xx_serial_pm, - .tx_empty = s3c24xx_serial_tx_empty, - .get_mctrl = s3c24xx_serial_get_mctrl, - .set_mctrl = s3c24xx_serial_set_mctrl, - .stop_tx = s3c24xx_serial_stop_tx, - .start_tx = s3c24xx_serial_start_tx, - .stop_rx = s3c24xx_serial_stop_rx, - .enable_ms = s3c24xx_serial_enable_ms, - .break_ctl = s3c24xx_serial_break_ctl, - .startup = s3c24xx_serial_startup, - .shutdown = s3c24xx_serial_shutdown, - .set_termios = s3c24xx_serial_set_termios, - .type = s3c24xx_serial_type, - .release_port = s3c24xx_serial_release_port, - .request_port = s3c24xx_serial_request_port, - .config_port = s3c24xx_serial_config_port, - .verify_port = s3c24xx_serial_verify_port, -}; - - -static struct uart_driver s3c24xx_uart_drv = { - .owner = THIS_MODULE, - .dev_name = "s3c2410_serial", - .nr = CONFIG_SERIAL_SAMSUNG_UARTS, - .cons = S3C24XX_SERIAL_CONSOLE, - .driver_name = S3C24XX_SERIAL_NAME, - .major = S3C24XX_SERIAL_MAJOR, - .minor = S3C24XX_SERIAL_MINOR, -}; - -static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = { - [0] = { - .port = { - .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock), - .iotype = UPIO_MEM, - .irq = IRQ_S3CUART_RX0, - .uartclk = 0, - .fifosize = 16, - .ops = &s3c24xx_serial_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 0, - } - }, - [1] = { - .port = { - .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock), - .iotype = UPIO_MEM, - .irq = IRQ_S3CUART_RX1, - .uartclk = 0, - .fifosize = 16, - .ops = &s3c24xx_serial_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 1, - } - }, -#if CONFIG_SERIAL_SAMSUNG_UARTS > 2 - - [2] = { - .port = { - .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock), - .iotype = UPIO_MEM, - .irq = IRQ_S3CUART_RX2, - .uartclk = 0, - .fifosize = 16, - .ops = &s3c24xx_serial_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 2, - } - }, -#endif -#if CONFIG_SERIAL_SAMSUNG_UARTS > 3 - [3] = { - .port = { - .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock), - .iotype = UPIO_MEM, - .irq = IRQ_S3CUART_RX3, - .uartclk = 0, - .fifosize = 16, - .ops = &s3c24xx_serial_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 3, - } - } -#endif -}; - -/* s3c24xx_serial_resetport - * - * wrapper to call the specific reset for this port (reset the fifos - * and the settings) -*/ - -static inline int s3c24xx_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); - - return (info->reset_port)(port, cfg); -} - - -#ifdef CONFIG_CPU_FREQ - -static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb, - unsigned long val, void *data) -{ - struct s3c24xx_uart_port *port; - struct uart_port *uport; - - port = container_of(nb, struct s3c24xx_uart_port, freq_transition); - uport = &port->port; - - /* check to see if port is enabled */ - - if (port->pm_level != 0) - return 0; - - /* try and work out if the baudrate is changing, we can detect - * a change in rate, but we do not have support for detecting - * a disturbance in the clock-rate over the change. - */ - - if (IS_ERR(port->clk)) - goto exit; - - if (port->baudclk_rate == clk_get_rate(port->clk)) - goto exit; - - if (val == CPUFREQ_PRECHANGE) { - /* we should really shut the port down whilst the - * frequency change is in progress. */ - - } else if (val == CPUFREQ_POSTCHANGE) { - struct ktermios *termios; - struct tty_struct *tty; - - if (uport->state == NULL) - goto exit; - - tty = uport->state->port.tty; - - if (tty == NULL) - goto exit; - - termios = tty->termios; - - if (termios == NULL) { - printk(KERN_WARNING "%s: no termios?\n", __func__); - goto exit; - } - - s3c24xx_serial_set_termios(uport, termios, NULL); - } - - exit: - return 0; -} - -static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) -{ - port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition; - - return cpufreq_register_notifier(&port->freq_transition, - CPUFREQ_TRANSITION_NOTIFIER); -} - -static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) -{ - cpufreq_unregister_notifier(&port->freq_transition, - CPUFREQ_TRANSITION_NOTIFIER); -} - -#else -static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) -{ - return 0; -} - -static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) -{ -} -#endif - -/* s3c24xx_serial_init_port - * - * initialise a single serial port from the platform device given - */ - -static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, - struct s3c24xx_uart_info *info, - struct platform_device *platdev) -{ - struct uart_port *port = &ourport->port; - struct s3c2410_uartcfg *cfg; - struct resource *res; - int ret; - - dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev); - - if (platdev == NULL) - return -ENODEV; - - cfg = s3c24xx_dev_to_cfg(&platdev->dev); - - if (port->mapbase != 0) - return 0; - - if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) { - printk(KERN_ERR "%s: port %d bigger than %d\n", __func__, - cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS); - return -ERANGE; - } - - /* setup info for port */ - port->dev = &platdev->dev; - ourport->info = info; - - /* copy the info in from provided structure */ - ourport->port.fifosize = info->fifosize; - - dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport); - - port->uartclk = 1; - - if (cfg->uart_flags & UPF_CONS_FLOW) { - dbg("s3c24xx_serial_init_port: enabling flow control\n"); - port->flags |= UPF_CONS_FLOW; - } - - /* sort our the physical and virtual addresses for each UART */ - - res = platform_get_resource(platdev, IORESOURCE_MEM, 0); - if (res == NULL) { - printk(KERN_ERR "failed to find memory resource for uart\n"); - return -EINVAL; - } - - dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); - - port->mapbase = res->start; - port->membase = S3C_VA_UART + (res->start & 0xfffff); - ret = platform_get_irq(platdev, 0); - if (ret < 0) - port->irq = 0; - else { - port->irq = ret; - ourport->rx_irq = ret; - ourport->tx_irq = ret + 1; - } - - ret = platform_get_irq(platdev, 1); - if (ret > 0) - ourport->tx_irq = ret; - - ourport->clk = clk_get(&platdev->dev, "uart"); - - dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n", - port->mapbase, port->membase, port->irq, - ourport->rx_irq, ourport->tx_irq, port->uartclk); - - /* reset the fifos (and setup the uart) */ - s3c24xx_serial_resetport(port, cfg); - return 0; -} - -static ssize_t s3c24xx_serial_show_clksrc(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct uart_port *port = s3c24xx_dev_to_port(dev); - struct s3c24xx_uart_port *ourport = to_ourport(port); - - return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name); -} - -static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL); - -/* Device driver serial port probe */ - -static int probe_index; - -int s3c24xx_serial_probe(struct platform_device *dev, - struct s3c24xx_uart_info *info) -{ - struct s3c24xx_uart_port *ourport; - int ret; - - dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index); - - ourport = &s3c24xx_serial_ports[probe_index]; - probe_index++; - - dbg("%s: initialising port %p...\n", __func__, ourport); - - ret = s3c24xx_serial_init_port(ourport, info, dev); - if (ret < 0) - goto probe_err; - - dbg("%s: adding port\n", __func__); - uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); - platform_set_drvdata(dev, &ourport->port); - - ret = device_create_file(&dev->dev, &dev_attr_clock_source); - if (ret < 0) - printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__); - - ret = s3c24xx_serial_cpufreq_register(ourport); - if (ret < 0) - dev_err(&dev->dev, "failed to add cpufreq notifier\n"); - - return 0; - - probe_err: - return ret; -} - -EXPORT_SYMBOL_GPL(s3c24xx_serial_probe); - -int __devexit s3c24xx_serial_remove(struct platform_device *dev) -{ - struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); - - if (port) { - s3c24xx_serial_cpufreq_deregister(to_ourport(port)); - device_remove_file(&dev->dev, &dev_attr_clock_source); - uart_remove_one_port(&s3c24xx_uart_drv, port); - } - - return 0; -} - -EXPORT_SYMBOL_GPL(s3c24xx_serial_remove); - -/* UART power management code */ - -#ifdef CONFIG_PM - -static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state) -{ - struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); - - if (port) - uart_suspend_port(&s3c24xx_uart_drv, port); - - return 0; -} - -static int s3c24xx_serial_resume(struct platform_device *dev) -{ - struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); - struct s3c24xx_uart_port *ourport = to_ourport(port); - - if (port) { - clk_enable(ourport->clk); - s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port)); - clk_disable(ourport->clk); - - uart_resume_port(&s3c24xx_uart_drv, port); - } - - return 0; -} -#endif - -int s3c24xx_serial_init(struct platform_driver *drv, - struct s3c24xx_uart_info *info) -{ - dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); - -#ifdef CONFIG_PM - drv->suspend = s3c24xx_serial_suspend; - drv->resume = s3c24xx_serial_resume; -#endif - - return platform_driver_register(drv); -} - -EXPORT_SYMBOL_GPL(s3c24xx_serial_init); - -/* module initialisation code */ - -static int __init s3c24xx_serial_modinit(void) -{ - int ret; - - ret = uart_register_driver(&s3c24xx_uart_drv); - if (ret < 0) { - printk(KERN_ERR "failed to register UART driver\n"); - return -1; - } - - return 0; -} - -static void __exit s3c24xx_serial_modexit(void) -{ - uart_unregister_driver(&s3c24xx_uart_drv); -} - -module_init(s3c24xx_serial_modinit); -module_exit(s3c24xx_serial_modexit); - -/* Console code */ - -#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE - -static struct uart_port *cons_uart; - -static int -s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); - unsigned long ufstat, utrstat; - - if (ufcon & S3C2410_UFCON_FIFOMODE) { - /* fifo mode - check amount of data in fifo registers... */ - - ufstat = rd_regl(port, S3C2410_UFSTAT); - return (ufstat & info->tx_fifofull) ? 0 : 1; - } - - /* in non-fifo mode, we go and use the tx buffer empty */ - - utrstat = rd_regl(port, S3C2410_UTRSTAT); - return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0; -} - -static void -s3c24xx_serial_console_putchar(struct uart_port *port, int ch) -{ - unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON); - while (!s3c24xx_serial_console_txrdy(port, ufcon)) - barrier(); - wr_regb(cons_uart, S3C2410_UTXH, ch); -} - -static void -s3c24xx_serial_console_write(struct console *co, const char *s, - unsigned int count) -{ - uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar); -} - -static void __init -s3c24xx_serial_get_options(struct uart_port *port, int *baud, - int *parity, int *bits) -{ - struct s3c24xx_uart_clksrc clksrc; - struct clk *clk; - unsigned int ulcon; - unsigned int ucon; - unsigned int ubrdiv; - unsigned long rate; - - ulcon = rd_regl(port, S3C2410_ULCON); - ucon = rd_regl(port, S3C2410_UCON); - ubrdiv = rd_regl(port, S3C2410_UBRDIV); - - dbg("s3c24xx_serial_get_options: port=%p\n" - "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n", - port, ulcon, ucon, ubrdiv); - - if ((ucon & 0xf) != 0) { - /* consider the serial port configured if the tx/rx mode set */ - - switch (ulcon & S3C2410_LCON_CSMASK) { - case S3C2410_LCON_CS5: - *bits = 5; - break; - case S3C2410_LCON_CS6: - *bits = 6; - break; - case S3C2410_LCON_CS7: - *bits = 7; - break; - default: - case S3C2410_LCON_CS8: - *bits = 8; - break; - } - - switch (ulcon & S3C2410_LCON_PMASK) { - case S3C2410_LCON_PEVEN: - *parity = 'e'; - break; - - case S3C2410_LCON_PODD: - *parity = 'o'; - break; - - case S3C2410_LCON_PNONE: - default: - *parity = 'n'; - } - - /* now calculate the baud rate */ - - s3c24xx_serial_getsource(port, &clksrc); - - clk = clk_get(port->dev, clksrc.name); - if (!IS_ERR(clk) && clk != NULL) - rate = clk_get_rate(clk) / clksrc.divisor; - else - rate = 1; - - - *baud = rate / (16 * (ubrdiv + 1)); - dbg("calculated baud %d\n", *baud); - } - -} - -/* s3c24xx_serial_init_ports - * - * initialise the serial ports from the machine provided initialisation - * data. -*/ - -static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info) -{ - struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports; - struct platform_device **platdev_ptr; - int i; - - dbg("s3c24xx_serial_init_ports: initialising ports...\n"); - - platdev_ptr = s3c24xx_uart_devs; - - for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) { - s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr); - } - - return 0; -} - -static int __init -s3c24xx_serial_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n", - co, co->index, options); - - /* is this a valid port */ - - if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS) - co->index = 0; - - port = &s3c24xx_serial_ports[co->index].port; - - /* is the port configured? */ - - if (port->mapbase == 0x0) { - co->index = 0; - port = &s3c24xx_serial_ports[co->index].port; - } - - cons_uart = port; - - dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index); - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - s3c24xx_serial_get_options(port, &baud, &parity, &bits); - - dbg("s3c24xx_serial_console_setup: baud %d\n", baud); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -/* s3c24xx_serial_initconsole - * - * initialise the console from one of the uart drivers -*/ - -static struct console s3c24xx_serial_console = { - .name = S3C24XX_SERIAL_NAME, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, - .write = s3c24xx_serial_console_write, - .setup = s3c24xx_serial_console_setup -}; - -int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info **info) - -{ - struct platform_device *dev = s3c24xx_uart_devs[0]; - - dbg("s3c24xx_serial_initconsole\n"); - - /* select driver based on the cpu */ - - if (dev == NULL) { - printk(KERN_ERR "s3c24xx: no devices for console init\n"); - return 0; - } - - if (strcmp(dev->name, drv->driver.name) != 0) - return 0; - - s3c24xx_serial_console.data = &s3c24xx_uart_drv; - s3c24xx_serial_init_ports(info); - - register_console(&s3c24xx_serial_console); - return 0; -} - -#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ - -MODULE_DESCRIPTION("Samsung SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks "); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h deleted file mode 100644 index 0ac06a07d25f..000000000000 --- a/drivers/serial/samsung.h +++ /dev/null @@ -1,120 +0,0 @@ -/* linux/drivers/serial/samsung.h - * - * Driver for Samsung SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -struct s3c24xx_uart_info { - char *name; - unsigned int type; - unsigned int fifosize; - unsigned long rx_fifomask; - unsigned long rx_fifoshift; - unsigned long rx_fifofull; - unsigned long tx_fifomask; - unsigned long tx_fifoshift; - unsigned long tx_fifofull; - - /* uart port features */ - - unsigned int has_divslot:1; - - /* clock source control */ - - int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); - int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); - - /* uart controls */ - int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *); -}; - -struct s3c24xx_uart_port { - unsigned char rx_claimed; - unsigned char tx_claimed; - unsigned int pm_level; - unsigned long baudclk_rate; - - unsigned int rx_irq; - unsigned int tx_irq; - - struct s3c24xx_uart_info *info; - struct s3c24xx_uart_clksrc *clksrc; - struct clk *clk; - struct clk *baudclk; - struct uart_port port; - -#ifdef CONFIG_CPU_FREQ - struct notifier_block freq_transition; -#endif -}; - -/* conversion functions */ - -#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev) -#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data) - -/* register access controls */ - -#define portaddr(port, reg) ((port)->membase + (reg)) - -#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg))) -#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg))) - -#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg)) -#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg)) - -extern int s3c24xx_serial_probe(struct platform_device *dev, - struct s3c24xx_uart_info *uart); - -extern int __devexit s3c24xx_serial_remove(struct platform_device *dev); - -extern int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info **uart); - -extern int s3c24xx_serial_init(struct platform_driver *drv, - struct s3c24xx_uart_info *info); - -#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE - -#define s3c24xx_console_init(__drv, __inf) \ -static int __init s3c_serial_console_init(void) \ -{ \ - struct s3c24xx_uart_info *uinfo[CONFIG_SERIAL_SAMSUNG_UARTS]; \ - int i; \ - \ - for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) \ - uinfo[i] = __inf; \ - return s3c24xx_serial_initconsole(__drv, uinfo); \ -} \ - \ -console_initcall(s3c_serial_console_init) - -#else -#define s3c24xx_console_init(drv, inf) extern void no_console(void) -#endif - -#ifdef CONFIG_SERIAL_SAMSUNG_DEBUG - -extern void printascii(const char *); - -static void dbg(const char *fmt, ...) -{ - va_list va; - char buff[256]; - - va_start(va, fmt); - vsprintf(buff, fmt, va); - va_end(va); - - printascii(buff); -} - -#else -#define dbg(x...) do { } while (0) -#endif diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c deleted file mode 100644 index a2f2b3254499..000000000000 --- a/drivers/serial/sb1250-duart.c +++ /dev/null @@ -1,976 +0,0 @@ -/* - * drivers/serial/sb1250-duart.c - * - * Support for the asynchronous serial interface (DUART) included - * in the BCM1250 and derived System-On-a-Chip (SOC) devices. - * - * Copyright (c) 2007 Maciej W. Rozycki - * - * Derived from drivers/char/sb1250_duart.c for which the following - * copyright applies: - * - * Copyright (c) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * References: - * - * "BCM1250/BCM1125/BCM1125H User Manual", Broadcom Corporation - */ - -#if defined(CONFIG_SERIAL_SB1250_DUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - - -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) -#include -#include - -#define SBD_CHANREGS(line) A_BCM1480_DUART_CHANREG((line), 0) -#define SBD_CTRLREGS(line) A_BCM1480_DUART_CTRLREG((line), 0) -#define SBD_INT(line) (K_BCM1480_INT_UART_0 + (line)) - -#define DUART_CHANREG_SPACING BCM1480_DUART_CHANREG_SPACING - -#define R_DUART_IMRREG(line) R_BCM1480_DUART_IMRREG(line) -#define R_DUART_INCHREG(line) R_BCM1480_DUART_INCHREG(line) -#define R_DUART_ISRREG(line) R_BCM1480_DUART_ISRREG(line) - -#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) -#include -#include - -#define SBD_CHANREGS(line) A_DUART_CHANREG((line), 0) -#define SBD_CTRLREGS(line) A_DUART_CTRLREG(0) -#define SBD_INT(line) (K_INT_UART_0 + (line)) - -#else -#error invalid SB1250 UART configuration - -#endif - - -MODULE_AUTHOR("Maciej W. Rozycki "); -MODULE_DESCRIPTION("BCM1xxx on-chip DUART serial driver"); -MODULE_LICENSE("GPL"); - - -#define DUART_MAX_CHIP 2 -#define DUART_MAX_SIDE 2 - -/* - * Per-port state. - */ -struct sbd_port { - struct sbd_duart *duart; - struct uart_port port; - unsigned char __iomem *memctrl; - int tx_stopped; - int initialised; -}; - -/* - * Per-DUART state for the shared register space. - */ -struct sbd_duart { - struct sbd_port sport[2]; - unsigned long mapctrl; - atomic_t map_guard; -}; - -#define to_sport(uport) container_of(uport, struct sbd_port, port) - -static struct sbd_duart sbd_duarts[DUART_MAX_CHIP]; - - -/* - * Reading and writing SB1250 DUART registers. - * - * There are three register spaces: two per-channel ones and - * a shared one. We have to define accessors appropriately. - * All registers are 64-bit and all but the Baud Rate Clock - * registers only define 8 least significant bits. There is - * also a workaround to take into account. Raw accessors use - * the full register width, but cooked ones truncate it - * intentionally so that the rest of the driver does not care. - */ -static u64 __read_sbdchn(struct sbd_port *sport, int reg) -{ - void __iomem *csr = sport->port.membase + reg; - - return __raw_readq(csr); -} - -static u64 __read_sbdshr(struct sbd_port *sport, int reg) -{ - void __iomem *csr = sport->memctrl + reg; - - return __raw_readq(csr); -} - -static void __write_sbdchn(struct sbd_port *sport, int reg, u64 value) -{ - void __iomem *csr = sport->port.membase + reg; - - __raw_writeq(value, csr); -} - -static void __write_sbdshr(struct sbd_port *sport, int reg, u64 value) -{ - void __iomem *csr = sport->memctrl + reg; - - __raw_writeq(value, csr); -} - -/* - * In bug 1956, we get glitches that can mess up uart registers. This - * "read-mode-reg after any register access" is an accepted workaround. - */ -static void __war_sbd1956(struct sbd_port *sport) -{ - __read_sbdchn(sport, R_DUART_MODE_REG_1); - __read_sbdchn(sport, R_DUART_MODE_REG_2); -} - -static unsigned char read_sbdchn(struct sbd_port *sport, int reg) -{ - unsigned char retval; - - retval = __read_sbdchn(sport, reg); - if (SIBYTE_1956_WAR) - __war_sbd1956(sport); - return retval; -} - -static unsigned char read_sbdshr(struct sbd_port *sport, int reg) -{ - unsigned char retval; - - retval = __read_sbdshr(sport, reg); - if (SIBYTE_1956_WAR) - __war_sbd1956(sport); - return retval; -} - -static void write_sbdchn(struct sbd_port *sport, int reg, unsigned int value) -{ - __write_sbdchn(sport, reg, value); - if (SIBYTE_1956_WAR) - __war_sbd1956(sport); -} - -static void write_sbdshr(struct sbd_port *sport, int reg, unsigned int value) -{ - __write_sbdshr(sport, reg, value); - if (SIBYTE_1956_WAR) - __war_sbd1956(sport); -} - - -static int sbd_receive_ready(struct sbd_port *sport) -{ - return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_RX_RDY; -} - -static int sbd_receive_drain(struct sbd_port *sport) -{ - int loops = 10000; - - while (sbd_receive_ready(sport) && --loops) - read_sbdchn(sport, R_DUART_RX_HOLD); - return loops; -} - -static int __maybe_unused sbd_transmit_ready(struct sbd_port *sport) -{ - return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_TX_RDY; -} - -static int __maybe_unused sbd_transmit_drain(struct sbd_port *sport) -{ - int loops = 10000; - - while (!sbd_transmit_ready(sport) && --loops) - udelay(2); - return loops; -} - -static int sbd_transmit_empty(struct sbd_port *sport) -{ - return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_TX_EMT; -} - -static int sbd_line_drain(struct sbd_port *sport) -{ - int loops = 10000; - - while (!sbd_transmit_empty(sport) && --loops) - udelay(2); - return loops; -} - - -static unsigned int sbd_tx_empty(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - - return sbd_transmit_empty(sport) ? TIOCSER_TEMT : 0; -} - -static unsigned int sbd_get_mctrl(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - unsigned int mctrl, status; - - status = read_sbdshr(sport, R_DUART_IN_PORT); - status >>= (uport->line) % 2; - mctrl = (!(status & M_DUART_IN_PIN0_VAL) ? TIOCM_CTS : 0) | - (!(status & M_DUART_IN_PIN4_VAL) ? TIOCM_CAR : 0) | - (!(status & M_DUART_RIN0_PIN) ? TIOCM_RNG : 0) | - (!(status & M_DUART_IN_PIN2_VAL) ? TIOCM_DSR : 0); - return mctrl; -} - -static void sbd_set_mctrl(struct uart_port *uport, unsigned int mctrl) -{ - struct sbd_port *sport = to_sport(uport); - unsigned int clr = 0, set = 0, mode2; - - if (mctrl & TIOCM_DTR) - set |= M_DUART_SET_OPR2; - else - clr |= M_DUART_CLR_OPR2; - if (mctrl & TIOCM_RTS) - set |= M_DUART_SET_OPR0; - else - clr |= M_DUART_CLR_OPR0; - clr <<= (uport->line) % 2; - set <<= (uport->line) % 2; - - mode2 = read_sbdchn(sport, R_DUART_MODE_REG_2); - mode2 &= ~M_DUART_CHAN_MODE; - if (mctrl & TIOCM_LOOP) - mode2 |= V_DUART_CHAN_MODE_LCL_LOOP; - else - mode2 |= V_DUART_CHAN_MODE_NORMAL; - - write_sbdshr(sport, R_DUART_CLEAR_OPR, clr); - write_sbdshr(sport, R_DUART_SET_OPR, set); - write_sbdchn(sport, R_DUART_MODE_REG_2, mode2); -} - -static void sbd_stop_tx(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - - write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS); - sport->tx_stopped = 1; -}; - -static void sbd_start_tx(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - unsigned int mask; - - /* Enable tx interrupts. */ - mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); - mask |= M_DUART_IMR_TX; - write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); - - /* Go!, go!, go!... */ - write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_EN); - sport->tx_stopped = 0; -}; - -static void sbd_stop_rx(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - - write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), 0); -}; - -static void sbd_enable_ms(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - - write_sbdchn(sport, R_DUART_AUXCTL_X, - M_DUART_CIN_CHNG_ENA | M_DUART_CTS_CHNG_ENA); -} - -static void sbd_break_ctl(struct uart_port *uport, int break_state) -{ - struct sbd_port *sport = to_sport(uport); - - if (break_state == -1) - write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_START_BREAK); - else - write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_STOP_BREAK); -} - - -static void sbd_receive_chars(struct sbd_port *sport) -{ - struct uart_port *uport = &sport->port; - struct uart_icount *icount; - unsigned int status, ch, flag; - int count; - - for (count = 16; count; count--) { - status = read_sbdchn(sport, R_DUART_STATUS); - if (!(status & M_DUART_RX_RDY)) - break; - - ch = read_sbdchn(sport, R_DUART_RX_HOLD); - - flag = TTY_NORMAL; - - icount = &uport->icount; - icount->rx++; - - if (unlikely(status & - (M_DUART_RCVD_BRK | M_DUART_FRM_ERR | - M_DUART_PARITY_ERR | M_DUART_OVRUN_ERR))) { - if (status & M_DUART_RCVD_BRK) { - icount->brk++; - if (uart_handle_break(uport)) - continue; - } else if (status & M_DUART_FRM_ERR) - icount->frame++; - else if (status & M_DUART_PARITY_ERR) - icount->parity++; - if (status & M_DUART_OVRUN_ERR) - icount->overrun++; - - status &= uport->read_status_mask; - if (status & M_DUART_RCVD_BRK) - flag = TTY_BREAK; - else if (status & M_DUART_FRM_ERR) - flag = TTY_FRAME; - else if (status & M_DUART_PARITY_ERR) - flag = TTY_PARITY; - } - - if (uart_handle_sysrq_char(uport, ch)) - continue; - - uart_insert_char(uport, status, M_DUART_OVRUN_ERR, ch, flag); - } - - tty_flip_buffer_push(uport->state->port.tty); -} - -static void sbd_transmit_chars(struct sbd_port *sport) -{ - struct uart_port *uport = &sport->port; - struct circ_buf *xmit = &sport->port.state->xmit; - unsigned int mask; - int stop_tx; - - /* XON/XOFF chars. */ - if (sport->port.x_char) { - write_sbdchn(sport, R_DUART_TX_HOLD, sport->port.x_char); - sport->port.icount.tx++; - sport->port.x_char = 0; - return; - } - - /* If nothing to do or stopped or hardware stopped. */ - stop_tx = (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)); - - /* Send char. */ - if (!stop_tx) { - write_sbdchn(sport, R_DUART_TX_HOLD, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - sport->port.icount.tx++; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&sport->port); - } - - /* Are we are done? */ - if (stop_tx || uart_circ_empty(xmit)) { - /* Disable tx interrupts. */ - mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); - mask &= ~M_DUART_IMR_TX; - write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); - } -} - -static void sbd_status_handle(struct sbd_port *sport) -{ - struct uart_port *uport = &sport->port; - unsigned int delta; - - delta = read_sbdshr(sport, R_DUART_INCHREG((uport->line) % 2)); - delta >>= (uport->line) % 2; - - if (delta & (M_DUART_IN_PIN0_VAL << S_DUART_IN_PIN_CHNG)) - uart_handle_cts_change(uport, !(delta & M_DUART_IN_PIN0_VAL)); - - if (delta & (M_DUART_IN_PIN2_VAL << S_DUART_IN_PIN_CHNG)) - uport->icount.dsr++; - - if (delta & ((M_DUART_IN_PIN2_VAL | M_DUART_IN_PIN0_VAL) << - S_DUART_IN_PIN_CHNG)) - wake_up_interruptible(&uport->state->port.delta_msr_wait); -} - -static irqreturn_t sbd_interrupt(int irq, void *dev_id) -{ - struct sbd_port *sport = dev_id; - struct uart_port *uport = &sport->port; - irqreturn_t status = IRQ_NONE; - unsigned int intstat; - int count; - - for (count = 16; count; count--) { - intstat = read_sbdshr(sport, - R_DUART_ISRREG((uport->line) % 2)); - intstat &= read_sbdshr(sport, - R_DUART_IMRREG((uport->line) % 2)); - intstat &= M_DUART_ISR_ALL; - if (!intstat) - break; - - if (intstat & M_DUART_ISR_RX) - sbd_receive_chars(sport); - if (intstat & M_DUART_ISR_IN) - sbd_status_handle(sport); - if (intstat & M_DUART_ISR_TX) - sbd_transmit_chars(sport); - - status = IRQ_HANDLED; - } - - return status; -} - - -static int sbd_startup(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - unsigned int mode1; - int ret; - - ret = request_irq(sport->port.irq, sbd_interrupt, - IRQF_SHARED, "sb1250-duart", sport); - if (ret) - return ret; - - /* Clear the receive FIFO. */ - sbd_receive_drain(sport); - - /* Clear the interrupt registers. */ - write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT); - read_sbdshr(sport, R_DUART_INCHREG((uport->line) % 2)); - - /* Set rx/tx interrupt to FIFO available. */ - mode1 = read_sbdchn(sport, R_DUART_MODE_REG_1); - mode1 &= ~(M_DUART_RX_IRQ_SEL_RXFULL | M_DUART_TX_IRQ_SEL_TXEMPT); - write_sbdchn(sport, R_DUART_MODE_REG_1, mode1); - - /* Disable tx, enable rx. */ - write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_EN); - sport->tx_stopped = 1; - - /* Enable interrupts. */ - write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), - M_DUART_IMR_IN | M_DUART_IMR_RX); - - return 0; -} - -static void sbd_shutdown(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - - write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_DIS); - sport->tx_stopped = 1; - free_irq(sport->port.irq, sport); -} - - -static void sbd_init_port(struct sbd_port *sport) -{ - struct uart_port *uport = &sport->port; - - if (sport->initialised) - return; - - /* There is no DUART reset feature, so just set some sane defaults. */ - write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_TX); - write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_RX); - write_sbdchn(sport, R_DUART_MODE_REG_1, V_DUART_BITS_PER_CHAR_8); - write_sbdchn(sport, R_DUART_MODE_REG_2, 0); - write_sbdchn(sport, R_DUART_FULL_CTL, - V_DUART_INT_TIME(0) | V_DUART_SIG_FULL(15)); - write_sbdchn(sport, R_DUART_OPCR_X, 0); - write_sbdchn(sport, R_DUART_AUXCTL_X, 0); - write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), 0); - - sport->initialised = 1; -} - -static void sbd_set_termios(struct uart_port *uport, struct ktermios *termios, - struct ktermios *old_termios) -{ - struct sbd_port *sport = to_sport(uport); - unsigned int mode1 = 0, mode2 = 0, aux = 0; - unsigned int mode1mask = 0, mode2mask = 0, auxmask = 0; - unsigned int oldmode1, oldmode2, oldaux; - unsigned int baud, brg; - unsigned int command; - - mode1mask |= ~(M_DUART_PARITY_MODE | M_DUART_PARITY_TYPE_ODD | - M_DUART_BITS_PER_CHAR); - mode2mask |= ~M_DUART_STOP_BIT_LEN_2; - auxmask |= ~M_DUART_CTS_CHNG_ENA; - - /* Byte size. */ - switch (termios->c_cflag & CSIZE) { - case CS5: - case CS6: - /* Unsupported, leave unchanged. */ - mode1mask |= M_DUART_PARITY_MODE; - break; - case CS7: - mode1 |= V_DUART_BITS_PER_CHAR_7; - break; - case CS8: - default: - mode1 |= V_DUART_BITS_PER_CHAR_8; - break; - } - - /* Parity and stop bits. */ - if (termios->c_cflag & CSTOPB) - mode2 |= M_DUART_STOP_BIT_LEN_2; - else - mode2 |= M_DUART_STOP_BIT_LEN_1; - if (termios->c_cflag & PARENB) - mode1 |= V_DUART_PARITY_MODE_ADD; - else - mode1 |= V_DUART_PARITY_MODE_NONE; - if (termios->c_cflag & PARODD) - mode1 |= M_DUART_PARITY_TYPE_ODD; - else - mode1 |= M_DUART_PARITY_TYPE_EVEN; - - baud = uart_get_baud_rate(uport, termios, old_termios, 1200, 5000000); - brg = V_DUART_BAUD_RATE(baud); - /* The actual lower bound is 1221bps, so compensate. */ - if (brg > M_DUART_CLK_COUNTER) - brg = M_DUART_CLK_COUNTER; - - uart_update_timeout(uport, termios->c_cflag, baud); - - uport->read_status_mask = M_DUART_OVRUN_ERR; - if (termios->c_iflag & INPCK) - uport->read_status_mask |= M_DUART_FRM_ERR | - M_DUART_PARITY_ERR; - if (termios->c_iflag & (BRKINT | PARMRK)) - uport->read_status_mask |= M_DUART_RCVD_BRK; - - uport->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - uport->ignore_status_mask |= M_DUART_FRM_ERR | - M_DUART_PARITY_ERR; - if (termios->c_iflag & IGNBRK) { - uport->ignore_status_mask |= M_DUART_RCVD_BRK; - if (termios->c_iflag & IGNPAR) - uport->ignore_status_mask |= M_DUART_OVRUN_ERR; - } - - if (termios->c_cflag & CREAD) - command = M_DUART_RX_EN; - else - command = M_DUART_RX_DIS; - - if (termios->c_cflag & CRTSCTS) - aux |= M_DUART_CTS_CHNG_ENA; - else - aux &= ~M_DUART_CTS_CHNG_ENA; - - spin_lock(&uport->lock); - - if (sport->tx_stopped) - command |= M_DUART_TX_DIS; - else - command |= M_DUART_TX_EN; - - oldmode1 = read_sbdchn(sport, R_DUART_MODE_REG_1) & mode1mask; - oldmode2 = read_sbdchn(sport, R_DUART_MODE_REG_2) & mode2mask; - oldaux = read_sbdchn(sport, R_DUART_AUXCTL_X) & auxmask; - - if (!sport->tx_stopped) - sbd_line_drain(sport); - write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_DIS); - - write_sbdchn(sport, R_DUART_MODE_REG_1, mode1 | oldmode1); - write_sbdchn(sport, R_DUART_MODE_REG_2, mode2 | oldmode2); - write_sbdchn(sport, R_DUART_CLK_SEL, brg); - write_sbdchn(sport, R_DUART_AUXCTL_X, aux | oldaux); - - write_sbdchn(sport, R_DUART_CMD, command); - - spin_unlock(&uport->lock); -} - - -static const char *sbd_type(struct uart_port *uport) -{ - return "SB1250 DUART"; -} - -static void sbd_release_port(struct uart_port *uport) -{ - struct sbd_port *sport = to_sport(uport); - struct sbd_duart *duart = sport->duart; - int map_guard; - - iounmap(sport->memctrl); - sport->memctrl = NULL; - iounmap(uport->membase); - uport->membase = NULL; - - map_guard = atomic_add_return(-1, &duart->map_guard); - if (!map_guard) - release_mem_region(duart->mapctrl, DUART_CHANREG_SPACING); - release_mem_region(uport->mapbase, DUART_CHANREG_SPACING); -} - -static int sbd_map_port(struct uart_port *uport) -{ - const char *err = KERN_ERR "sbd: Cannot map MMIO\n"; - struct sbd_port *sport = to_sport(uport); - struct sbd_duart *duart = sport->duart; - - if (!uport->membase) - uport->membase = ioremap_nocache(uport->mapbase, - DUART_CHANREG_SPACING); - if (!uport->membase) { - printk(err); - return -ENOMEM; - } - - if (!sport->memctrl) - sport->memctrl = ioremap_nocache(duart->mapctrl, - DUART_CHANREG_SPACING); - if (!sport->memctrl) { - printk(err); - iounmap(uport->membase); - uport->membase = NULL; - return -ENOMEM; - } - - return 0; -} - -static int sbd_request_port(struct uart_port *uport) -{ - const char *err = KERN_ERR "sbd: Unable to reserve MMIO resource\n"; - struct sbd_duart *duart = to_sport(uport)->duart; - int map_guard; - int ret = 0; - - if (!request_mem_region(uport->mapbase, DUART_CHANREG_SPACING, - "sb1250-duart")) { - printk(err); - return -EBUSY; - } - map_guard = atomic_add_return(1, &duart->map_guard); - if (map_guard == 1) { - if (!request_mem_region(duart->mapctrl, DUART_CHANREG_SPACING, - "sb1250-duart")) { - atomic_add(-1, &duart->map_guard); - printk(err); - ret = -EBUSY; - } - } - if (!ret) { - ret = sbd_map_port(uport); - if (ret) { - map_guard = atomic_add_return(-1, &duart->map_guard); - if (!map_guard) - release_mem_region(duart->mapctrl, - DUART_CHANREG_SPACING); - } - } - if (ret) { - release_mem_region(uport->mapbase, DUART_CHANREG_SPACING); - return ret; - } - return 0; -} - -static void sbd_config_port(struct uart_port *uport, int flags) -{ - struct sbd_port *sport = to_sport(uport); - - if (flags & UART_CONFIG_TYPE) { - if (sbd_request_port(uport)) - return; - - uport->type = PORT_SB1250_DUART; - - sbd_init_port(sport); - } -} - -static int sbd_verify_port(struct uart_port *uport, struct serial_struct *ser) -{ - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_SB1250_DUART) - ret = -EINVAL; - if (ser->irq != uport->irq) - ret = -EINVAL; - if (ser->baud_base != uport->uartclk / 16) - ret = -EINVAL; - return ret; -} - - -static const struct uart_ops sbd_ops = { - .tx_empty = sbd_tx_empty, - .set_mctrl = sbd_set_mctrl, - .get_mctrl = sbd_get_mctrl, - .stop_tx = sbd_stop_tx, - .start_tx = sbd_start_tx, - .stop_rx = sbd_stop_rx, - .enable_ms = sbd_enable_ms, - .break_ctl = sbd_break_ctl, - .startup = sbd_startup, - .shutdown = sbd_shutdown, - .set_termios = sbd_set_termios, - .type = sbd_type, - .release_port = sbd_release_port, - .request_port = sbd_request_port, - .config_port = sbd_config_port, - .verify_port = sbd_verify_port, -}; - -/* Initialize SB1250 DUART port structures. */ -static void __init sbd_probe_duarts(void) -{ - static int probed; - int chip, side; - int max_lines, line; - - if (probed) - return; - - /* Set the number of available units based on the SOC type. */ - switch (soc_type) { - case K_SYS_SOC_TYPE_BCM1x55: - case K_SYS_SOC_TYPE_BCM1x80: - max_lines = 4; - break; - default: - /* Assume at least two serial ports at the normal address. */ - max_lines = 2; - break; - } - - probed = 1; - - for (chip = 0, line = 0; chip < DUART_MAX_CHIP && line < max_lines; - chip++) { - sbd_duarts[chip].mapctrl = SBD_CTRLREGS(line); - - for (side = 0; side < DUART_MAX_SIDE && line < max_lines; - side++, line++) { - struct sbd_port *sport = &sbd_duarts[chip].sport[side]; - struct uart_port *uport = &sport->port; - - sport->duart = &sbd_duarts[chip]; - - uport->irq = SBD_INT(line); - uport->uartclk = 100000000 / 20 * 16; - uport->fifosize = 16; - uport->iotype = UPIO_MEM; - uport->flags = UPF_BOOT_AUTOCONF; - uport->ops = &sbd_ops; - uport->line = line; - uport->mapbase = SBD_CHANREGS(line); - } - } -} - - -#ifdef CONFIG_SERIAL_SB1250_DUART_CONSOLE -/* - * Serial console stuff. Very basic, polling driver for doing serial - * console output. The console_sem is held by the caller, so we - * shouldn't be interrupted for more console activity. - */ -static void sbd_console_putchar(struct uart_port *uport, int ch) -{ - struct sbd_port *sport = to_sport(uport); - - sbd_transmit_drain(sport); - write_sbdchn(sport, R_DUART_TX_HOLD, ch); -} - -static void sbd_console_write(struct console *co, const char *s, - unsigned int count) -{ - int chip = co->index / DUART_MAX_SIDE; - int side = co->index % DUART_MAX_SIDE; - struct sbd_port *sport = &sbd_duarts[chip].sport[side]; - struct uart_port *uport = &sport->port; - unsigned long flags; - unsigned int mask; - - /* Disable transmit interrupts and enable the transmitter. */ - spin_lock_irqsave(&uport->lock, flags); - mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); - write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), - mask & ~M_DUART_IMR_TX); - write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_EN); - spin_unlock_irqrestore(&uport->lock, flags); - - uart_console_write(&sport->port, s, count, sbd_console_putchar); - - /* Restore transmit interrupts and the transmitter enable. */ - spin_lock_irqsave(&uport->lock, flags); - sbd_line_drain(sport); - if (sport->tx_stopped) - write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS); - write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); - spin_unlock_irqrestore(&uport->lock, flags); -} - -static int __init sbd_console_setup(struct console *co, char *options) -{ - int chip = co->index / DUART_MAX_SIDE; - int side = co->index % DUART_MAX_SIDE; - struct sbd_port *sport = &sbd_duarts[chip].sport[side]; - struct uart_port *uport = &sport->port; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - int ret; - - if (!sport->duart) - return -ENXIO; - - ret = sbd_map_port(uport); - if (ret) - return ret; - - sbd_init_port(sport); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - return uart_set_options(uport, co, baud, parity, bits, flow); -} - -static struct uart_driver sbd_reg; -static struct console sbd_console = { - .name = "duart", - .write = sbd_console_write, - .device = uart_console_device, - .setup = sbd_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sbd_reg -}; - -static int __init sbd_serial_console_init(void) -{ - sbd_probe_duarts(); - register_console(&sbd_console); - - return 0; -} - -console_initcall(sbd_serial_console_init); - -#define SERIAL_SB1250_DUART_CONSOLE &sbd_console -#else -#define SERIAL_SB1250_DUART_CONSOLE NULL -#endif /* CONFIG_SERIAL_SB1250_DUART_CONSOLE */ - - -static struct uart_driver sbd_reg = { - .owner = THIS_MODULE, - .driver_name = "sb1250_duart", - .dev_name = "duart", - .major = TTY_MAJOR, - .minor = SB1250_DUART_MINOR_BASE, - .nr = DUART_MAX_CHIP * DUART_MAX_SIDE, - .cons = SERIAL_SB1250_DUART_CONSOLE, -}; - -/* Set up the driver and register it. */ -static int __init sbd_init(void) -{ - int i, ret; - - sbd_probe_duarts(); - - ret = uart_register_driver(&sbd_reg); - if (ret) - return ret; - - for (i = 0; i < DUART_MAX_CHIP * DUART_MAX_SIDE; i++) { - struct sbd_duart *duart = &sbd_duarts[i / DUART_MAX_SIDE]; - struct sbd_port *sport = &duart->sport[i % DUART_MAX_SIDE]; - struct uart_port *uport = &sport->port; - - if (sport->duart) - uart_add_one_port(&sbd_reg, uport); - } - - return 0; -} - -/* Unload the driver. Unregister stuff, get ready to go away. */ -static void __exit sbd_exit(void) -{ - int i; - - for (i = DUART_MAX_CHIP * DUART_MAX_SIDE - 1; i >= 0; i--) { - struct sbd_duart *duart = &sbd_duarts[i / DUART_MAX_SIDE]; - struct sbd_port *sport = &duart->sport[i % DUART_MAX_SIDE]; - struct uart_port *uport = &sport->port; - - if (sport->duart) - uart_remove_one_port(&sbd_reg, uport); - } - - uart_unregister_driver(&sbd_reg); -} - -module_init(sbd_init); -module_exit(sbd_exit); diff --git a/drivers/serial/sc26xx.c b/drivers/serial/sc26xx.c deleted file mode 100644 index 75038ad2b242..000000000000 --- a/drivers/serial/sc26xx.c +++ /dev/null @@ -1,757 +0,0 @@ -/* - * SC268xx.c: Serial driver for Philiphs SC2681/SC2692 devices. - * - * Copyright (C) 2006,2007 Thomas Bogendörfer (tsbogend@alpha.franken.de) - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - -#define SC26XX_MAJOR 204 -#define SC26XX_MINOR_START 205 -#define SC26XX_NR 2 - -struct uart_sc26xx_port { - struct uart_port port[2]; - u8 dsr_mask[2]; - u8 cts_mask[2]; - u8 dcd_mask[2]; - u8 ri_mask[2]; - u8 dtr_mask[2]; - u8 rts_mask[2]; - u8 imr; -}; - -/* register common to both ports */ -#define RD_ISR 0x14 -#define RD_IPR 0x34 - -#define WR_ACR 0x10 -#define WR_IMR 0x14 -#define WR_OPCR 0x34 -#define WR_OPR_SET 0x38 -#define WR_OPR_CLR 0x3C - -/* access common register */ -#define READ_SC(p, r) readb((p)->membase + RD_##r) -#define WRITE_SC(p, r, v) writeb((v), (p)->membase + WR_##r) - -/* register per port */ -#define RD_PORT_MRx 0x00 -#define RD_PORT_SR 0x04 -#define RD_PORT_RHR 0x0c - -#define WR_PORT_MRx 0x00 -#define WR_PORT_CSR 0x04 -#define WR_PORT_CR 0x08 -#define WR_PORT_THR 0x0c - -/* SR bits */ -#define SR_BREAK (1 << 7) -#define SR_FRAME (1 << 6) -#define SR_PARITY (1 << 5) -#define SR_OVERRUN (1 << 4) -#define SR_TXRDY (1 << 2) -#define SR_RXRDY (1 << 0) - -#define CR_RES_MR (1 << 4) -#define CR_RES_RX (2 << 4) -#define CR_RES_TX (3 << 4) -#define CR_STRT_BRK (6 << 4) -#define CR_STOP_BRK (7 << 4) -#define CR_DIS_TX (1 << 3) -#define CR_ENA_TX (1 << 2) -#define CR_DIS_RX (1 << 1) -#define CR_ENA_RX (1 << 0) - -/* ISR bits */ -#define ISR_RXRDYB (1 << 5) -#define ISR_TXRDYB (1 << 4) -#define ISR_RXRDYA (1 << 1) -#define ISR_TXRDYA (1 << 0) - -/* IMR bits */ -#define IMR_RXRDY (1 << 1) -#define IMR_TXRDY (1 << 0) - -/* access port register */ -static inline u8 read_sc_port(struct uart_port *p, u8 reg) -{ - return readb(p->membase + p->line * 0x20 + reg); -} - -static inline void write_sc_port(struct uart_port *p, u8 reg, u8 val) -{ - writeb(val, p->membase + p->line * 0x20 + reg); -} - -#define READ_SC_PORT(p, r) read_sc_port(p, RD_PORT_##r) -#define WRITE_SC_PORT(p, r, v) write_sc_port(p, WR_PORT_##r, v) - -static void sc26xx_enable_irq(struct uart_port *port, int mask) -{ - struct uart_sc26xx_port *up; - int line = port->line; - - port -= line; - up = container_of(port, struct uart_sc26xx_port, port[0]); - - up->imr |= mask << (line * 4); - WRITE_SC(port, IMR, up->imr); -} - -static void sc26xx_disable_irq(struct uart_port *port, int mask) -{ - struct uart_sc26xx_port *up; - int line = port->line; - - port -= line; - up = container_of(port, struct uart_sc26xx_port, port[0]); - - up->imr &= ~(mask << (line * 4)); - WRITE_SC(port, IMR, up->imr); -} - -static struct tty_struct *receive_chars(struct uart_port *port) -{ - struct tty_struct *tty = NULL; - int limit = 10000; - unsigned char ch; - char flag; - u8 status; - - if (port->state != NULL) /* Unopened serial console */ - tty = port->state->port.tty; - - while (limit-- > 0) { - status = READ_SC_PORT(port, SR); - if (!(status & SR_RXRDY)) - break; - ch = READ_SC_PORT(port, RHR); - - flag = TTY_NORMAL; - port->icount.rx++; - - if (unlikely(status & (SR_BREAK | SR_FRAME | - SR_PARITY | SR_OVERRUN))) { - if (status & SR_BREAK) { - status &= ~(SR_PARITY | SR_FRAME); - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } else if (status & SR_PARITY) - port->icount.parity++; - else if (status & SR_FRAME) - port->icount.frame++; - if (status & SR_OVERRUN) - port->icount.overrun++; - - status &= port->read_status_mask; - if (status & SR_BREAK) - flag = TTY_BREAK; - else if (status & SR_PARITY) - flag = TTY_PARITY; - else if (status & SR_FRAME) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, ch)) - continue; - - if (status & port->ignore_status_mask) - continue; - - tty_insert_flip_char(tty, ch, flag); - } - return tty; -} - -static void transmit_chars(struct uart_port *port) -{ - struct circ_buf *xmit; - - if (!port->state) - return; - - xmit = &port->state->xmit; - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - sc26xx_disable_irq(port, IMR_TXRDY); - return; - } - while (!uart_circ_empty(xmit)) { - if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) - break; - - WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - -static irqreturn_t sc26xx_interrupt(int irq, void *dev_id) -{ - struct uart_sc26xx_port *up = dev_id; - struct tty_struct *tty; - unsigned long flags; - u8 isr; - - spin_lock_irqsave(&up->port[0].lock, flags); - - tty = NULL; - isr = READ_SC(&up->port[0], ISR); - if (isr & ISR_TXRDYA) - transmit_chars(&up->port[0]); - if (isr & ISR_RXRDYA) - tty = receive_chars(&up->port[0]); - - spin_unlock(&up->port[0].lock); - - if (tty) - tty_flip_buffer_push(tty); - - spin_lock(&up->port[1].lock); - - tty = NULL; - if (isr & ISR_TXRDYB) - transmit_chars(&up->port[1]); - if (isr & ISR_RXRDYB) - tty = receive_chars(&up->port[1]); - - spin_unlock_irqrestore(&up->port[1].lock, flags); - - if (tty) - tty_flip_buffer_push(tty); - - return IRQ_HANDLED; -} - -/* port->lock is not held. */ -static unsigned int sc26xx_tx_empty(struct uart_port *port) -{ - return (READ_SC_PORT(port, SR) & SR_TXRDY) ? TIOCSER_TEMT : 0; -} - -/* port->lock held by caller. */ -static void sc26xx_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_sc26xx_port *up; - int line = port->line; - - port -= line; - up = container_of(port, struct uart_sc26xx_port, port[0]); - - if (up->dtr_mask[line]) { - if (mctrl & TIOCM_DTR) - WRITE_SC(port, OPR_SET, up->dtr_mask[line]); - else - WRITE_SC(port, OPR_CLR, up->dtr_mask[line]); - } - if (up->rts_mask[line]) { - if (mctrl & TIOCM_RTS) - WRITE_SC(port, OPR_SET, up->rts_mask[line]); - else - WRITE_SC(port, OPR_CLR, up->rts_mask[line]); - } -} - -/* port->lock is held by caller and interrupts are disabled. */ -static unsigned int sc26xx_get_mctrl(struct uart_port *port) -{ - struct uart_sc26xx_port *up; - int line = port->line; - unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR; - u8 ipr; - - port -= line; - up = container_of(port, struct uart_sc26xx_port, port[0]); - ipr = READ_SC(port, IPR) ^ 0xff; - - if (up->dsr_mask[line]) { - mctrl &= ~TIOCM_DSR; - mctrl |= ipr & up->dsr_mask[line] ? TIOCM_DSR : 0; - } - if (up->cts_mask[line]) { - mctrl &= ~TIOCM_CTS; - mctrl |= ipr & up->cts_mask[line] ? TIOCM_CTS : 0; - } - if (up->dcd_mask[line]) { - mctrl &= ~TIOCM_CAR; - mctrl |= ipr & up->dcd_mask[line] ? TIOCM_CAR : 0; - } - if (up->ri_mask[line]) { - mctrl &= ~TIOCM_RNG; - mctrl |= ipr & up->ri_mask[line] ? TIOCM_RNG : 0; - } - return mctrl; -} - -/* port->lock held by caller. */ -static void sc26xx_stop_tx(struct uart_port *port) -{ - return; -} - -/* port->lock held by caller. */ -static void sc26xx_start_tx(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - - while (!uart_circ_empty(xmit)) { - if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) { - sc26xx_enable_irq(port, IMR_TXRDY); - break; - } - WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } -} - -/* port->lock held by caller. */ -static void sc26xx_stop_rx(struct uart_port *port) -{ -} - -/* port->lock held by caller. */ -static void sc26xx_enable_ms(struct uart_port *port) -{ -} - -/* port->lock is not held. */ -static void sc26xx_break_ctl(struct uart_port *port, int break_state) -{ - if (break_state == -1) - WRITE_SC_PORT(port, CR, CR_STRT_BRK); - else - WRITE_SC_PORT(port, CR, CR_STOP_BRK); -} - -/* port->lock is not held. */ -static int sc26xx_startup(struct uart_port *port) -{ - sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY); - WRITE_SC(port, OPCR, 0); - - /* reset tx and rx */ - WRITE_SC_PORT(port, CR, CR_RES_RX); - WRITE_SC_PORT(port, CR, CR_RES_TX); - - /* start rx/tx */ - WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX); - - /* enable irqs */ - sc26xx_enable_irq(port, IMR_RXRDY); - return 0; -} - -/* port->lock is not held. */ -static void sc26xx_shutdown(struct uart_port *port) -{ - /* disable interrupst */ - sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY); - - /* stop tx/rx */ - WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX); -} - -/* port->lock is not held. */ -static void sc26xx_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); - unsigned int quot = uart_get_divisor(port, baud); - unsigned int iflag, cflag; - unsigned long flags; - u8 mr1, mr2, csr; - - spin_lock_irqsave(&port->lock, flags); - - while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc) - udelay(2); - - WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX); - - iflag = termios->c_iflag; - cflag = termios->c_cflag; - - port->read_status_mask = SR_OVERRUN; - if (iflag & INPCK) - port->read_status_mask |= SR_PARITY | SR_FRAME; - if (iflag & (BRKINT | PARMRK)) - port->read_status_mask |= SR_BREAK; - - port->ignore_status_mask = 0; - if (iflag & IGNBRK) - port->ignore_status_mask |= SR_BREAK; - if ((cflag & CREAD) == 0) - port->ignore_status_mask |= SR_BREAK | SR_FRAME | - SR_PARITY | SR_OVERRUN; - - switch (cflag & CSIZE) { - case CS5: - mr1 = 0x00; - break; - case CS6: - mr1 = 0x01; - break; - case CS7: - mr1 = 0x02; - break; - default: - case CS8: - mr1 = 0x03; - break; - } - mr2 = 0x07; - if (cflag & CSTOPB) - mr2 = 0x0f; - if (cflag & PARENB) { - if (cflag & PARODD) - mr1 |= (1 << 2); - } else - mr1 |= (2 << 3); - - switch (baud) { - case 50: - csr = 0x00; - break; - case 110: - csr = 0x11; - break; - case 134: - csr = 0x22; - break; - case 200: - csr = 0x33; - break; - case 300: - csr = 0x44; - break; - case 600: - csr = 0x55; - break; - case 1200: - csr = 0x66; - break; - case 2400: - csr = 0x88; - break; - case 4800: - csr = 0x99; - break; - default: - case 9600: - csr = 0xbb; - break; - case 19200: - csr = 0xcc; - break; - } - - WRITE_SC_PORT(port, CR, CR_RES_MR); - WRITE_SC_PORT(port, MRx, mr1); - WRITE_SC_PORT(port, MRx, mr2); - - WRITE_SC(port, ACR, 0x80); - WRITE_SC_PORT(port, CSR, csr); - - /* reset tx and rx */ - WRITE_SC_PORT(port, CR, CR_RES_RX); - WRITE_SC_PORT(port, CR, CR_RES_TX); - - WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX); - while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc) - udelay(2); - - /* XXX */ - uart_update_timeout(port, cflag, - (port->uartclk / (16 * quot))); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *sc26xx_type(struct uart_port *port) -{ - return "SC26XX"; -} - -static void sc26xx_release_port(struct uart_port *port) -{ -} - -static int sc26xx_request_port(struct uart_port *port) -{ - return 0; -} - -static void sc26xx_config_port(struct uart_port *port, int flags) -{ -} - -static int sc26xx_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return -EINVAL; -} - -static struct uart_ops sc26xx_ops = { - .tx_empty = sc26xx_tx_empty, - .set_mctrl = sc26xx_set_mctrl, - .get_mctrl = sc26xx_get_mctrl, - .stop_tx = sc26xx_stop_tx, - .start_tx = sc26xx_start_tx, - .stop_rx = sc26xx_stop_rx, - .enable_ms = sc26xx_enable_ms, - .break_ctl = sc26xx_break_ctl, - .startup = sc26xx_startup, - .shutdown = sc26xx_shutdown, - .set_termios = sc26xx_set_termios, - .type = sc26xx_type, - .release_port = sc26xx_release_port, - .request_port = sc26xx_request_port, - .config_port = sc26xx_config_port, - .verify_port = sc26xx_verify_port, -}; - -static struct uart_port *sc26xx_port; - -#ifdef CONFIG_SERIAL_SC26XX_CONSOLE -static void sc26xx_console_putchar(struct uart_port *port, char c) -{ - unsigned long flags; - int limit = 1000000; - - spin_lock_irqsave(&port->lock, flags); - - while (limit-- > 0) { - if (READ_SC_PORT(port, SR) & SR_TXRDY) { - WRITE_SC_PORT(port, THR, c); - break; - } - udelay(2); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void sc26xx_console_write(struct console *con, const char *s, unsigned n) -{ - struct uart_port *port = sc26xx_port; - int i; - - for (i = 0; i < n; i++) { - if (*s == '\n') - sc26xx_console_putchar(port, '\r'); - sc26xx_console_putchar(port, *s++); - } -} - -static int __init sc26xx_console_setup(struct console *con, char *options) -{ - struct uart_port *port = sc26xx_port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (port->type != PORT_SC26XX) - return -1; - - printk(KERN_INFO "Console: ttySC%d (SC26XX)\n", con->index); - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, con, baud, parity, bits, flow); -} - -static struct uart_driver sc26xx_reg; -static struct console sc26xx_console = { - .name = "ttySC", - .write = sc26xx_console_write, - .device = uart_console_device, - .setup = sc26xx_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sc26xx_reg, -}; -#define SC26XX_CONSOLE &sc26xx_console -#else -#define SC26XX_CONSOLE NULL -#endif - -static struct uart_driver sc26xx_reg = { - .owner = THIS_MODULE, - .driver_name = "SC26xx", - .dev_name = "ttySC", - .major = SC26XX_MAJOR, - .minor = SC26XX_MINOR_START, - .nr = SC26XX_NR, - .cons = SC26XX_CONSOLE, -}; - -static u8 sc26xx_flags2mask(unsigned int flags, unsigned int bitpos) -{ - unsigned int bit = (flags >> bitpos) & 15; - - return bit ? (1 << (bit - 1)) : 0; -} - -static void __devinit sc26xx_init_masks(struct uart_sc26xx_port *up, - int line, unsigned int data) -{ - up->dtr_mask[line] = sc26xx_flags2mask(data, 0); - up->rts_mask[line] = sc26xx_flags2mask(data, 4); - up->dsr_mask[line] = sc26xx_flags2mask(data, 8); - up->cts_mask[line] = sc26xx_flags2mask(data, 12); - up->dcd_mask[line] = sc26xx_flags2mask(data, 16); - up->ri_mask[line] = sc26xx_flags2mask(data, 20); -} - -static int __devinit sc26xx_probe(struct platform_device *dev) -{ - struct resource *res; - struct uart_sc26xx_port *up; - unsigned int *sc26xx_data = dev->dev.platform_data; - int err; - - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; - - up = kzalloc(sizeof *up, GFP_KERNEL); - if (unlikely(!up)) - return -ENOMEM; - - up->port[0].line = 0; - up->port[0].ops = &sc26xx_ops; - up->port[0].type = PORT_SC26XX; - up->port[0].uartclk = (29491200 / 16); /* arbitrary */ - - up->port[0].mapbase = res->start; - up->port[0].membase = ioremap_nocache(up->port[0].mapbase, 0x40); - up->port[0].iotype = UPIO_MEM; - up->port[0].irq = platform_get_irq(dev, 0); - - up->port[0].dev = &dev->dev; - - sc26xx_init_masks(up, 0, sc26xx_data[0]); - - sc26xx_port = &up->port[0]; - - up->port[1].line = 1; - up->port[1].ops = &sc26xx_ops; - up->port[1].type = PORT_SC26XX; - up->port[1].uartclk = (29491200 / 16); /* arbitrary */ - - up->port[1].mapbase = up->port[0].mapbase; - up->port[1].membase = up->port[0].membase; - up->port[1].iotype = UPIO_MEM; - up->port[1].irq = up->port[0].irq; - - up->port[1].dev = &dev->dev; - - sc26xx_init_masks(up, 1, sc26xx_data[1]); - - err = uart_register_driver(&sc26xx_reg); - if (err) - goto out_free_port; - - sc26xx_reg.tty_driver->name_base = sc26xx_reg.minor; - - err = uart_add_one_port(&sc26xx_reg, &up->port[0]); - if (err) - goto out_unregister_driver; - - err = uart_add_one_port(&sc26xx_reg, &up->port[1]); - if (err) - goto out_remove_port0; - - err = request_irq(up->port[0].irq, sc26xx_interrupt, 0, "sc26xx", up); - if (err) - goto out_remove_ports; - - dev_set_drvdata(&dev->dev, up); - return 0; - -out_remove_ports: - uart_remove_one_port(&sc26xx_reg, &up->port[1]); -out_remove_port0: - uart_remove_one_port(&sc26xx_reg, &up->port[0]); - -out_unregister_driver: - uart_unregister_driver(&sc26xx_reg); - -out_free_port: - kfree(up); - sc26xx_port = NULL; - return err; -} - - -static int __exit sc26xx_driver_remove(struct platform_device *dev) -{ - struct uart_sc26xx_port *up = dev_get_drvdata(&dev->dev); - - free_irq(up->port[0].irq, up); - - uart_remove_one_port(&sc26xx_reg, &up->port[0]); - uart_remove_one_port(&sc26xx_reg, &up->port[1]); - - uart_unregister_driver(&sc26xx_reg); - - kfree(up); - sc26xx_port = NULL; - - dev_set_drvdata(&dev->dev, NULL); - return 0; -} - -static struct platform_driver sc26xx_driver = { - .probe = sc26xx_probe, - .remove = __devexit_p(sc26xx_driver_remove), - .driver = { - .name = "SC26xx", - .owner = THIS_MODULE, - }, -}; - -static int __init sc26xx_init(void) -{ - return platform_driver_register(&sc26xx_driver); -} - -static void __exit sc26xx_exit(void) -{ - platform_driver_unregister(&sc26xx_driver); -} - -module_init(sc26xx_init); -module_exit(sc26xx_exit); - - -MODULE_AUTHOR("Thomas Bogendörfer"); -MODULE_DESCRIPTION("SC681/SC2692 serial driver"); -MODULE_VERSION("1.0"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:SC26xx"); diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c deleted file mode 100644 index 460a72d91bb7..000000000000 --- a/drivers/serial/serial_core.c +++ /dev/null @@ -1,2578 +0,0 @@ -/* - * linux/drivers/char/core.c - * - * Driver core for serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * - * Copyright 1999 ARM Limited - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include /* for serial_state and serial_icounter_struct */ -#include -#include -#include - -#include -#include - -/* - * This is used to lock changes in serial line configuration. - */ -static DEFINE_MUTEX(port_mutex); - -/* - * lockdep: port->lock is initialized in two places, but we - * want only one lock-class: - */ -static struct lock_class_key port_lock_key; - -#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) - -#ifdef CONFIG_SERIAL_CORE_CONSOLE -#define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line) -#else -#define uart_console(port) (0) -#endif - -static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, - struct ktermios *old_termios); -static void __uart_wait_until_sent(struct uart_port *port, int timeout); -static void uart_change_pm(struct uart_state *state, int pm_state); - -/* - * This routine is used by the interrupt handler to schedule processing in - * the software interrupt portion of the driver. - */ -void uart_write_wakeup(struct uart_port *port) -{ - struct uart_state *state = port->state; - /* - * This means you called this function _after_ the port was - * closed. No cookie for you. - */ - BUG_ON(!state); - tasklet_schedule(&state->tlet); -} - -static void uart_stop(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *port = state->uart_port; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - port->ops->stop_tx(port); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void __uart_start(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *port = state->uart_port; - - if (!uart_circ_empty(&state->xmit) && state->xmit.buf && - !tty->stopped && !tty->hw_stopped) - port->ops->start_tx(port); -} - -static void uart_start(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *port = state->uart_port; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - __uart_start(tty); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void uart_tasklet_action(unsigned long data) -{ - struct uart_state *state = (struct uart_state *)data; - tty_wakeup(state->port.tty); -} - -static inline void -uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear) -{ - unsigned long flags; - unsigned int old; - - spin_lock_irqsave(&port->lock, flags); - old = port->mctrl; - port->mctrl = (old & ~clear) | set; - if (old != port->mctrl) - port->ops->set_mctrl(port, port->mctrl); - spin_unlock_irqrestore(&port->lock, flags); -} - -#define uart_set_mctrl(port, set) uart_update_mctrl(port, set, 0) -#define uart_clear_mctrl(port, clear) uart_update_mctrl(port, 0, clear) - -/* - * Startup the port. This will be called once per open. All calls - * will be serialised by the per-port mutex. - */ -static int uart_startup(struct tty_struct *tty, struct uart_state *state, int init_hw) -{ - struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; - unsigned long page; - int retval = 0; - - if (port->flags & ASYNC_INITIALIZED) - return 0; - - /* - * Set the TTY IO error marker - we will only clear this - * once we have successfully opened the port. Also set - * up the tty->alt_speed kludge - */ - set_bit(TTY_IO_ERROR, &tty->flags); - - if (uport->type == PORT_UNKNOWN) - return 0; - - /* - * Initialise and allocate the transmit and temporary - * buffer. - */ - if (!state->xmit.buf) { - /* This is protected by the per port mutex */ - page = get_zeroed_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - - state->xmit.buf = (unsigned char *) page; - uart_circ_clear(&state->xmit); - } - - retval = uport->ops->startup(uport); - if (retval == 0) { - if (init_hw) { - /* - * Initialise the hardware port settings. - */ - uart_change_speed(tty, state, NULL); - - /* - * Setup the RTS and DTR signals once the - * port is open and ready to respond. - */ - if (tty->termios->c_cflag & CBAUD) - uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR); - } - - if (port->flags & ASYNC_CTS_FLOW) { - spin_lock_irq(&uport->lock); - if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS)) - tty->hw_stopped = 1; - spin_unlock_irq(&uport->lock); - } - - set_bit(ASYNCB_INITIALIZED, &port->flags); - - clear_bit(TTY_IO_ERROR, &tty->flags); - } - - if (retval && capable(CAP_SYS_ADMIN)) - retval = 0; - - return retval; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. Calls to - * uart_shutdown are serialised by the per-port semaphore. - */ -static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) -{ - struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; - - /* - * Set the TTY IO error marker - */ - if (tty) - set_bit(TTY_IO_ERROR, &tty->flags); - - if (test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags)) { - /* - * Turn off DTR and RTS early. - */ - if (!tty || (tty->termios->c_cflag & HUPCL)) - uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); - - /* - * clear delta_msr_wait queue to avoid mem leaks: we may free - * the irq here so the queue might never be woken up. Note - * that we won't end up waiting on delta_msr_wait again since - * any outstanding file descriptors should be pointing at - * hung_up_tty_fops now. - */ - wake_up_interruptible(&port->delta_msr_wait); - - /* - * Free the IRQ and disable the port. - */ - uport->ops->shutdown(uport); - - /* - * Ensure that the IRQ handler isn't running on another CPU. - */ - synchronize_irq(uport->irq); - } - - /* - * kill off our tasklet - */ - tasklet_kill(&state->tlet); - - /* - * Free the transmit buffer page. - */ - if (state->xmit.buf) { - free_page((unsigned long)state->xmit.buf); - state->xmit.buf = NULL; - } -} - -/** - * uart_update_timeout - update per-port FIFO timeout. - * @port: uart_port structure describing the port - * @cflag: termios cflag value - * @baud: speed of the port - * - * Set the port FIFO timeout value. The @cflag value should - * reflect the actual hardware settings. - */ -void -uart_update_timeout(struct uart_port *port, unsigned int cflag, - unsigned int baud) -{ - unsigned int bits; - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: - bits = 7; - break; - case CS6: - bits = 8; - break; - case CS7: - bits = 9; - break; - default: - bits = 10; - break; /* CS8 */ - } - - if (cflag & CSTOPB) - bits++; - if (cflag & PARENB) - bits++; - - /* - * The total number of bits to be transmitted in the fifo. - */ - bits = bits * port->fifosize; - - /* - * Figure the timeout to send the above number of bits. - * Add .02 seconds of slop - */ - port->timeout = (HZ * bits) / baud + HZ/50; -} - -EXPORT_SYMBOL(uart_update_timeout); - -/** - * uart_get_baud_rate - return baud rate for a particular port - * @port: uart_port structure describing the port in question. - * @termios: desired termios settings. - * @old: old termios (or NULL) - * @min: minimum acceptable baud rate - * @max: maximum acceptable baud rate - * - * Decode the termios structure into a numeric baud rate, - * taking account of the magic 38400 baud rate (with spd_* - * flags), and mapping the %B0 rate to 9600 baud. - * - * If the new baud rate is invalid, try the old termios setting. - * If it's still invalid, we try 9600 baud. - * - * Update the @termios structure to reflect the baud rate - * we're actually going to be using. Don't do this for the case - * where B0 is requested ("hang up"). - */ -unsigned int -uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, - struct ktermios *old, unsigned int min, unsigned int max) -{ - unsigned int try, baud, altbaud = 38400; - int hung_up = 0; - upf_t flags = port->flags & UPF_SPD_MASK; - - if (flags == UPF_SPD_HI) - altbaud = 57600; - else if (flags == UPF_SPD_VHI) - altbaud = 115200; - else if (flags == UPF_SPD_SHI) - altbaud = 230400; - else if (flags == UPF_SPD_WARP) - altbaud = 460800; - - for (try = 0; try < 2; try++) { - baud = tty_termios_baud_rate(termios); - - /* - * The spd_hi, spd_vhi, spd_shi, spd_warp kludge... - * Die! Die! Die! - */ - if (baud == 38400) - baud = altbaud; - - /* - * Special case: B0 rate. - */ - if (baud == 0) { - hung_up = 1; - baud = 9600; - } - - if (baud >= min && baud <= max) - return baud; - - /* - * Oops, the quotient was zero. Try again with - * the old baud rate if possible. - */ - termios->c_cflag &= ~CBAUD; - if (old) { - baud = tty_termios_baud_rate(old); - if (!hung_up) - tty_termios_encode_baud_rate(termios, - baud, baud); - old = NULL; - continue; - } - - /* - * As a last resort, if the range cannot be met then clip to - * the nearest chip supported rate. - */ - if (!hung_up) { - if (baud <= min) - tty_termios_encode_baud_rate(termios, - min + 1, min + 1); - else - tty_termios_encode_baud_rate(termios, - max - 1, max - 1); - } - } - /* Should never happen */ - WARN_ON(1); - return 0; -} - -EXPORT_SYMBOL(uart_get_baud_rate); - -/** - * uart_get_divisor - return uart clock divisor - * @port: uart_port structure describing the port. - * @baud: desired baud rate - * - * Calculate the uart clock divisor for the port. - */ -unsigned int -uart_get_divisor(struct uart_port *port, unsigned int baud) -{ - unsigned int quot; - - /* - * Old custom speed handling. - */ - if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) - quot = port->custom_divisor; - else - quot = (port->uartclk + (8 * baud)) / (16 * baud); - - return quot; -} - -EXPORT_SYMBOL(uart_get_divisor); - -/* FIXME: Consistent locking policy */ -static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, - struct ktermios *old_termios) -{ - struct tty_port *port = &state->port; - struct uart_port *uport = state->uart_port; - struct ktermios *termios; - - /* - * If we have no tty, termios, or the port does not exist, - * then we can't set the parameters for this port. - */ - if (!tty || !tty->termios || uport->type == PORT_UNKNOWN) - return; - - termios = tty->termios; - - /* - * Set flags based on termios cflag - */ - if (termios->c_cflag & CRTSCTS) - set_bit(ASYNCB_CTS_FLOW, &port->flags); - else - clear_bit(ASYNCB_CTS_FLOW, &port->flags); - - if (termios->c_cflag & CLOCAL) - clear_bit(ASYNCB_CHECK_CD, &port->flags); - else - set_bit(ASYNCB_CHECK_CD, &port->flags); - - uport->ops->set_termios(uport, termios, old_termios); -} - -static inline int __uart_put_char(struct uart_port *port, - struct circ_buf *circ, unsigned char c) -{ - unsigned long flags; - int ret = 0; - - if (!circ->buf) - return 0; - - spin_lock_irqsave(&port->lock, flags); - if (uart_circ_chars_free(circ) != 0) { - circ->buf[circ->head] = c; - circ->head = (circ->head + 1) & (UART_XMIT_SIZE - 1); - ret = 1; - } - spin_unlock_irqrestore(&port->lock, flags); - return ret; -} - -static int uart_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct uart_state *state = tty->driver_data; - - return __uart_put_char(state->uart_port, &state->xmit, ch); -} - -static void uart_flush_chars(struct tty_struct *tty) -{ - uart_start(tty); -} - -static int uart_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *port; - struct circ_buf *circ; - unsigned long flags; - int c, ret = 0; - - /* - * This means you called this function _after_ the port was - * closed. No cookie for you. - */ - if (!state) { - WARN_ON(1); - return -EL3HLT; - } - - port = state->uart_port; - circ = &state->xmit; - - if (!circ->buf) - return 0; - - spin_lock_irqsave(&port->lock, flags); - while (1) { - c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE); - if (count < c) - c = count; - if (c <= 0) - break; - memcpy(circ->buf + circ->head, buf, c); - circ->head = (circ->head + c) & (UART_XMIT_SIZE - 1); - buf += c; - count -= c; - ret += c; - } - spin_unlock_irqrestore(&port->lock, flags); - - uart_start(tty); - return ret; -} - -static int uart_write_room(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - unsigned long flags; - int ret; - - spin_lock_irqsave(&state->uart_port->lock, flags); - ret = uart_circ_chars_free(&state->xmit); - spin_unlock_irqrestore(&state->uart_port->lock, flags); - return ret; -} - -static int uart_chars_in_buffer(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - unsigned long flags; - int ret; - - spin_lock_irqsave(&state->uart_port->lock, flags); - ret = uart_circ_chars_pending(&state->xmit); - spin_unlock_irqrestore(&state->uart_port->lock, flags); - return ret; -} - -static void uart_flush_buffer(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *port; - unsigned long flags; - - /* - * This means you called this function _after_ the port was - * closed. No cookie for you. - */ - if (!state) { - WARN_ON(1); - return; - } - - port = state->uart_port; - pr_debug("uart_flush_buffer(%d) called\n", tty->index); - - spin_lock_irqsave(&port->lock, flags); - uart_circ_clear(&state->xmit); - if (port->ops->flush_buffer) - port->ops->flush_buffer(port); - spin_unlock_irqrestore(&port->lock, flags); - tty_wakeup(tty); -} - -/* - * This function is used to send a high-priority XON/XOFF character to - * the device - */ -static void uart_send_xchar(struct tty_struct *tty, char ch) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *port = state->uart_port; - unsigned long flags; - - if (port->ops->send_xchar) - port->ops->send_xchar(port, ch); - else { - port->x_char = ch; - if (ch) { - spin_lock_irqsave(&port->lock, flags); - port->ops->start_tx(port); - spin_unlock_irqrestore(&port->lock, flags); - } - } -} - -static void uart_throttle(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - - if (I_IXOFF(tty)) - uart_send_xchar(tty, STOP_CHAR(tty)); - - if (tty->termios->c_cflag & CRTSCTS) - uart_clear_mctrl(state->uart_port, TIOCM_RTS); -} - -static void uart_unthrottle(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *port = state->uart_port; - - if (I_IXOFF(tty)) { - if (port->x_char) - port->x_char = 0; - else - uart_send_xchar(tty, START_CHAR(tty)); - } - - if (tty->termios->c_cflag & CRTSCTS) - uart_set_mctrl(port, TIOCM_RTS); -} - -static int uart_get_info(struct uart_state *state, - struct serial_struct __user *retinfo) -{ - struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; - struct serial_struct tmp; - - memset(&tmp, 0, sizeof(tmp)); - - /* Ensure the state we copy is consistent and no hardware changes - occur as we go */ - mutex_lock(&port->mutex); - - tmp.type = uport->type; - tmp.line = uport->line; - tmp.port = uport->iobase; - if (HIGH_BITS_OFFSET) - tmp.port_high = (long) uport->iobase >> HIGH_BITS_OFFSET; - tmp.irq = uport->irq; - tmp.flags = uport->flags; - tmp.xmit_fifo_size = uport->fifosize; - tmp.baud_base = uport->uartclk / 16; - tmp.close_delay = port->close_delay / 10; - tmp.closing_wait = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ? - ASYNC_CLOSING_WAIT_NONE : - port->closing_wait / 10; - tmp.custom_divisor = uport->custom_divisor; - tmp.hub6 = uport->hub6; - tmp.io_type = uport->iotype; - tmp.iomem_reg_shift = uport->regshift; - tmp.iomem_base = (void *)(unsigned long)uport->mapbase; - - mutex_unlock(&port->mutex); - - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return 0; -} - -static int uart_set_info(struct tty_struct *tty, struct uart_state *state, - struct serial_struct __user *newinfo) -{ - struct serial_struct new_serial; - struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; - unsigned long new_port; - unsigned int change_irq, change_port, closing_wait; - unsigned int old_custom_divisor, close_delay; - upf_t old_flags, new_flags; - int retval = 0; - - if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) - return -EFAULT; - - new_port = new_serial.port; - if (HIGH_BITS_OFFSET) - new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET; - - new_serial.irq = irq_canonicalize(new_serial.irq); - close_delay = new_serial.close_delay * 10; - closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ? - ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10; - - /* - * This semaphore protects port->count. It is also - * very useful to prevent opens. Also, take the - * port configuration semaphore to make sure that a - * module insertion/removal doesn't change anything - * under us. - */ - mutex_lock(&port->mutex); - - change_irq = !(uport->flags & UPF_FIXED_PORT) - && new_serial.irq != uport->irq; - - /* - * Since changing the 'type' of the port changes its resource - * allocations, we should treat type changes the same as - * IO port changes. - */ - change_port = !(uport->flags & UPF_FIXED_PORT) - && (new_port != uport->iobase || - (unsigned long)new_serial.iomem_base != uport->mapbase || - new_serial.hub6 != uport->hub6 || - new_serial.io_type != uport->iotype || - new_serial.iomem_reg_shift != uport->regshift || - new_serial.type != uport->type); - - old_flags = uport->flags; - new_flags = new_serial.flags; - old_custom_divisor = uport->custom_divisor; - - if (!capable(CAP_SYS_ADMIN)) { - retval = -EPERM; - if (change_irq || change_port || - (new_serial.baud_base != uport->uartclk / 16) || - (close_delay != port->close_delay) || - (closing_wait != port->closing_wait) || - (new_serial.xmit_fifo_size && - new_serial.xmit_fifo_size != uport->fifosize) || - (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0)) - goto exit; - uport->flags = ((uport->flags & ~UPF_USR_MASK) | - (new_flags & UPF_USR_MASK)); - uport->custom_divisor = new_serial.custom_divisor; - goto check_and_exit; - } - - /* - * Ask the low level driver to verify the settings. - */ - if (uport->ops->verify_port) - retval = uport->ops->verify_port(uport, &new_serial); - - if ((new_serial.irq >= nr_irqs) || (new_serial.irq < 0) || - (new_serial.baud_base < 9600)) - retval = -EINVAL; - - if (retval) - goto exit; - - if (change_port || change_irq) { - retval = -EBUSY; - - /* - * Make sure that we are the sole user of this port. - */ - if (tty_port_users(port) > 1) - goto exit; - - /* - * We need to shutdown the serial port at the old - * port/type/irq combination. - */ - uart_shutdown(tty, state); - } - - if (change_port) { - unsigned long old_iobase, old_mapbase; - unsigned int old_type, old_iotype, old_hub6, old_shift; - - old_iobase = uport->iobase; - old_mapbase = uport->mapbase; - old_type = uport->type; - old_hub6 = uport->hub6; - old_iotype = uport->iotype; - old_shift = uport->regshift; - - /* - * Free and release old regions - */ - if (old_type != PORT_UNKNOWN) - uport->ops->release_port(uport); - - uport->iobase = new_port; - uport->type = new_serial.type; - uport->hub6 = new_serial.hub6; - uport->iotype = new_serial.io_type; - uport->regshift = new_serial.iomem_reg_shift; - uport->mapbase = (unsigned long)new_serial.iomem_base; - - /* - * Claim and map the new regions - */ - if (uport->type != PORT_UNKNOWN) { - retval = uport->ops->request_port(uport); - } else { - /* Always success - Jean II */ - retval = 0; - } - - /* - * If we fail to request resources for the - * new port, try to restore the old settings. - */ - if (retval && old_type != PORT_UNKNOWN) { - uport->iobase = old_iobase; - uport->type = old_type; - uport->hub6 = old_hub6; - uport->iotype = old_iotype; - uport->regshift = old_shift; - uport->mapbase = old_mapbase; - retval = uport->ops->request_port(uport); - /* - * If we failed to restore the old settings, - * we fail like this. - */ - if (retval) - uport->type = PORT_UNKNOWN; - - /* - * We failed anyway. - */ - retval = -EBUSY; - /* Added to return the correct error -Ram Gupta */ - goto exit; - } - } - - if (change_irq) - uport->irq = new_serial.irq; - if (!(uport->flags & UPF_FIXED_PORT)) - uport->uartclk = new_serial.baud_base * 16; - uport->flags = (uport->flags & ~UPF_CHANGE_MASK) | - (new_flags & UPF_CHANGE_MASK); - uport->custom_divisor = new_serial.custom_divisor; - port->close_delay = close_delay; - port->closing_wait = closing_wait; - if (new_serial.xmit_fifo_size) - uport->fifosize = new_serial.xmit_fifo_size; - if (port->tty) - port->tty->low_latency = - (uport->flags & UPF_LOW_LATENCY) ? 1 : 0; - - check_and_exit: - retval = 0; - if (uport->type == PORT_UNKNOWN) - goto exit; - if (port->flags & ASYNC_INITIALIZED) { - if (((old_flags ^ uport->flags) & UPF_SPD_MASK) || - old_custom_divisor != uport->custom_divisor) { - /* - * If they're setting up a custom divisor or speed, - * instead of clearing it, then bitch about it. No - * need to rate-limit; it's CAP_SYS_ADMIN only. - */ - if (uport->flags & UPF_SPD_MASK) { - char buf[64]; - printk(KERN_NOTICE - "%s sets custom speed on %s. This " - "is deprecated.\n", current->comm, - tty_name(port->tty, buf)); - } - uart_change_speed(tty, state, NULL); - } - } else - retval = uart_startup(tty, state, 1); - exit: - mutex_unlock(&port->mutex); - return retval; -} - -/** - * uart_get_lsr_info - get line status register info - * @tty: tty associated with the UART - * @state: UART being queried - * @value: returned modem value - * - * Note: uart_ioctl protects us against hangups. - */ -static int uart_get_lsr_info(struct tty_struct *tty, - struct uart_state *state, unsigned int __user *value) -{ - struct uart_port *uport = state->uart_port; - unsigned int result; - - result = uport->ops->tx_empty(uport); - - /* - * If we're about to load something into the transmit - * register, we'll pretend the transmitter isn't empty to - * avoid a race condition (depending on when the transmit - * interrupt happens). - */ - if (uport->x_char || - ((uart_circ_chars_pending(&state->xmit) > 0) && - !tty->stopped && !tty->hw_stopped)) - result &= ~TIOCSER_TEMT; - - return put_user(result, value); -} - -static int uart_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct uart_state *state = tty->driver_data; - struct tty_port *port = &state->port; - struct uart_port *uport = state->uart_port; - int result = -EIO; - - mutex_lock(&port->mutex); - if ((!file || !tty_hung_up_p(file)) && - !(tty->flags & (1 << TTY_IO_ERROR))) { - result = uport->mctrl; - - spin_lock_irq(&uport->lock); - result |= uport->ops->get_mctrl(uport); - spin_unlock_irq(&uport->lock); - } - mutex_unlock(&port->mutex); - - return result; -} - -static int -uart_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; - int ret = -EIO; - - mutex_lock(&port->mutex); - if ((!file || !tty_hung_up_p(file)) && - !(tty->flags & (1 << TTY_IO_ERROR))) { - uart_update_mctrl(uport, set, clear); - ret = 0; - } - mutex_unlock(&port->mutex); - return ret; -} - -static int uart_break_ctl(struct tty_struct *tty, int break_state) -{ - struct uart_state *state = tty->driver_data; - struct tty_port *port = &state->port; - struct uart_port *uport = state->uart_port; - - mutex_lock(&port->mutex); - - if (uport->type != PORT_UNKNOWN) - uport->ops->break_ctl(uport, break_state); - - mutex_unlock(&port->mutex); - return 0; -} - -static int uart_do_autoconfig(struct tty_struct *tty,struct uart_state *state) -{ - struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; - int flags, ret; - - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - - /* - * Take the per-port semaphore. This prevents count from - * changing, and hence any extra opens of the port while - * we're auto-configuring. - */ - if (mutex_lock_interruptible(&port->mutex)) - return -ERESTARTSYS; - - ret = -EBUSY; - if (tty_port_users(port) == 1) { - uart_shutdown(tty, state); - - /* - * If we already have a port type configured, - * we must release its resources. - */ - if (uport->type != PORT_UNKNOWN) - uport->ops->release_port(uport); - - flags = UART_CONFIG_TYPE; - if (uport->flags & UPF_AUTO_IRQ) - flags |= UART_CONFIG_IRQ; - - /* - * This will claim the ports resources if - * a port is found. - */ - uport->ops->config_port(uport, flags); - - ret = uart_startup(tty, state, 1); - } - mutex_unlock(&port->mutex); - return ret; -} - -/* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - * - * FIXME: This wants extracting into a common all driver implementation - * of TIOCMWAIT using tty_port. - */ -static int -uart_wait_modem_status(struct uart_state *state, unsigned long arg) -{ - struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; - DECLARE_WAITQUEUE(wait, current); - struct uart_icount cprev, cnow; - int ret; - - /* - * note the counters on entry - */ - spin_lock_irq(&uport->lock); - memcpy(&cprev, &uport->icount, sizeof(struct uart_icount)); - - /* - * Force modem status interrupts on - */ - uport->ops->enable_ms(uport); - spin_unlock_irq(&uport->lock); - - add_wait_queue(&port->delta_msr_wait, &wait); - for (;;) { - spin_lock_irq(&uport->lock); - memcpy(&cnow, &uport->icount, sizeof(struct uart_icount)); - spin_unlock_irq(&uport->lock); - - set_current_state(TASK_INTERRUPTIBLE); - - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - ret = 0; - break; - } - - schedule(); - - /* see if a signal did it */ - if (signal_pending(current)) { - ret = -ERESTARTSYS; - break; - } - - cprev = cnow; - } - - current->state = TASK_RUNNING; - remove_wait_queue(&port->delta_msr_wait, &wait); - - return ret; -} - -/* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ -static int uart_get_icount(struct tty_struct *tty, - struct serial_icounter_struct *icount) -{ - struct uart_state *state = tty->driver_data; - struct uart_icount cnow; - struct uart_port *uport = state->uart_port; - - spin_lock_irq(&uport->lock); - memcpy(&cnow, &uport->icount, sizeof(struct uart_icount)); - spin_unlock_irq(&uport->lock); - - icount->cts = cnow.cts; - icount->dsr = cnow.dsr; - icount->rng = cnow.rng; - icount->dcd = cnow.dcd; - icount->rx = cnow.rx; - icount->tx = cnow.tx; - icount->frame = cnow.frame; - icount->overrun = cnow.overrun; - icount->parity = cnow.parity; - icount->brk = cnow.brk; - icount->buf_overrun = cnow.buf_overrun; - - return 0; -} - -/* - * Called via sys_ioctl. We can use spin_lock_irq() here. - */ -static int -uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, - unsigned long arg) -{ - struct uart_state *state = tty->driver_data; - struct tty_port *port = &state->port; - void __user *uarg = (void __user *)arg; - int ret = -ENOIOCTLCMD; - - - /* - * These ioctls don't rely on the hardware to be present. - */ - switch (cmd) { - case TIOCGSERIAL: - ret = uart_get_info(state, uarg); - break; - - case TIOCSSERIAL: - ret = uart_set_info(tty, state, uarg); - break; - - case TIOCSERCONFIG: - ret = uart_do_autoconfig(tty, state); - break; - - case TIOCSERGWILD: /* obsolete */ - case TIOCSERSWILD: /* obsolete */ - ret = 0; - break; - } - - if (ret != -ENOIOCTLCMD) - goto out; - - if (tty->flags & (1 << TTY_IO_ERROR)) { - ret = -EIO; - goto out; - } - - /* - * The following should only be used when hardware is present. - */ - switch (cmd) { - case TIOCMIWAIT: - ret = uart_wait_modem_status(state, arg); - break; - } - - if (ret != -ENOIOCTLCMD) - goto out; - - mutex_lock(&port->mutex); - - if (tty_hung_up_p(filp)) { - ret = -EIO; - goto out_up; - } - - /* - * All these rely on hardware being present and need to be - * protected against the tty being hung up. - */ - switch (cmd) { - case TIOCSERGETLSR: /* Get line status register */ - ret = uart_get_lsr_info(tty, state, uarg); - break; - - default: { - struct uart_port *uport = state->uart_port; - if (uport->ops->ioctl) - ret = uport->ops->ioctl(uport, cmd, arg); - break; - } - } -out_up: - mutex_unlock(&port->mutex); -out: - return ret; -} - -static void uart_set_ldisc(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *uport = state->uart_port; - - if (uport->ops->set_ldisc) - uport->ops->set_ldisc(uport, tty->termios->c_line); -} - -static void uart_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) -{ - struct uart_state *state = tty->driver_data; - unsigned long flags; - unsigned int cflag = tty->termios->c_cflag; - - - /* - * These are the bits that are used to setup various - * flags in the low level driver. We can ignore the Bfoo - * bits in c_cflag; c_[io]speed will always be set - * appropriately by set_termios() in tty_ioctl.c - */ -#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) - if ((cflag ^ old_termios->c_cflag) == 0 && - tty->termios->c_ospeed == old_termios->c_ospeed && - tty->termios->c_ispeed == old_termios->c_ispeed && - RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0) { - return; - } - - uart_change_speed(tty, state, old_termios); - - /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) - uart_clear_mctrl(state->uart_port, TIOCM_RTS | TIOCM_DTR); - /* Handle transition away from B0 status */ - else if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { - unsigned int mask = TIOCM_DTR; - if (!(cflag & CRTSCTS) || - !test_bit(TTY_THROTTLED, &tty->flags)) - mask |= TIOCM_RTS; - uart_set_mctrl(state->uart_port, mask); - } - - /* Handle turning off CRTSCTS */ - if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) { - spin_lock_irqsave(&state->uart_port->lock, flags); - tty->hw_stopped = 0; - __uart_start(tty); - spin_unlock_irqrestore(&state->uart_port->lock, flags); - } - /* Handle turning on CRTSCTS */ - else if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) { - spin_lock_irqsave(&state->uart_port->lock, flags); - if (!(state->uart_port->ops->get_mctrl(state->uart_port) & TIOCM_CTS)) { - tty->hw_stopped = 1; - state->uart_port->ops->stop_tx(state->uart_port); - } - spin_unlock_irqrestore(&state->uart_port->lock, flags); - } -#if 0 - /* - * No need to wake up processes in open wait, since they - * sample the CLOCAL flag once, and don't recheck it. - * XXX It's not clear whether the current behavior is correct - * or not. Hence, this may change..... - */ - if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&state->uart_port.open_wait); -#endif -} - -/* - * In 2.4.5, calls to this will be serialized via the BKL in - * linux/drivers/char/tty_io.c:tty_release() - * linux/drivers/char/tty_io.c:do_tty_handup() - */ -static void uart_close(struct tty_struct *tty, struct file *filp) -{ - struct uart_state *state = tty->driver_data; - struct tty_port *port; - struct uart_port *uport; - unsigned long flags; - - BUG_ON(!tty_locked()); - - if (!state) - return; - - uport = state->uart_port; - port = &state->port; - - pr_debug("uart_close(%d) called\n", uport->line); - - mutex_lock(&port->mutex); - spin_lock_irqsave(&port->lock, flags); - - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&port->lock, flags); - goto done; - } - - if ((tty->count == 1) && (port->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. port->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_ERR "uart_close: bad serial port count; tty->count is 1, " - "port->count is %d\n", port->count); - port->count = 1; - } - if (--port->count < 0) { - printk(KERN_ERR "uart_close: bad serial port count for %s: %d\n", - tty->name, port->count); - port->count = 0; - } - if (port->count) { - spin_unlock_irqrestore(&port->lock, flags); - goto done; - } - - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters by - * setting tty->closing. - */ - tty->closing = 1; - spin_unlock_irqrestore(&port->lock, flags); - - if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) { - /* - * hack: open-coded tty_wait_until_sent to avoid - * recursive tty_lock - */ - long timeout = msecs_to_jiffies(port->closing_wait); - if (wait_event_interruptible_timeout(tty->write_wait, - !tty_chars_in_buffer(tty), timeout) >= 0) - __uart_wait_until_sent(uport, timeout); - } - - /* - * At this point, we stop accepting input. To do this, we - * disable the receive line status interrupts. - */ - if (port->flags & ASYNC_INITIALIZED) { - unsigned long flags; - spin_lock_irqsave(&uport->lock, flags); - uport->ops->stop_rx(uport); - spin_unlock_irqrestore(&uport->lock, flags); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - __uart_wait_until_sent(uport, uport->timeout); - } - - uart_shutdown(tty, state); - uart_flush_buffer(tty); - - tty_ldisc_flush(tty); - - tty_port_tty_set(port, NULL); - spin_lock_irqsave(&port->lock, flags); - tty->closing = 0; - - if (port->blocked_open) { - spin_unlock_irqrestore(&port->lock, flags); - if (port->close_delay) - msleep_interruptible(port->close_delay); - spin_lock_irqsave(&port->lock, flags); - } else if (!uart_console(uport)) { - spin_unlock_irqrestore(&port->lock, flags); - uart_change_pm(state, 3); - spin_lock_irqsave(&port->lock, flags); - } - - /* - * Wake up anyone trying to open this port. - */ - clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); - spin_unlock_irqrestore(&port->lock, flags); - wake_up_interruptible(&port->open_wait); - -done: - mutex_unlock(&port->mutex); -} - -static void __uart_wait_until_sent(struct uart_port *port, int timeout) -{ - unsigned long char_time, expire; - - if (port->type == PORT_UNKNOWN || port->fifosize == 0) - return; - - /* - * Set the check interval to be 1/5 of the estimated time to - * send a single character, and make it at least 1. The check - * interval should also be less than the timeout. - * - * Note: we have to use pretty tight timings here to satisfy - * the NIST-PCTS. - */ - char_time = (port->timeout - HZ/50) / port->fifosize; - char_time = char_time / 5; - if (char_time == 0) - char_time = 1; - if (timeout && timeout < char_time) - char_time = timeout; - - /* - * If the transmitter hasn't cleared in twice the approximate - * amount of time to send the entire FIFO, it probably won't - * ever clear. This assumes the UART isn't doing flow - * control, which is currently the case. Hence, if it ever - * takes longer than port->timeout, this is probably due to a - * UART bug of some kind. So, we clamp the timeout parameter at - * 2*port->timeout. - */ - if (timeout == 0 || timeout > 2 * port->timeout) - timeout = 2 * port->timeout; - - expire = jiffies + timeout; - - pr_debug("uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\n", - port->line, jiffies, expire); - - /* - * Check whether the transmitter is empty every 'char_time'. - * 'timeout' / 'expire' give us the maximum amount of time - * we wait. - */ - while (!port->ops->tx_empty(port)) { - msleep_interruptible(jiffies_to_msecs(char_time)); - if (signal_pending(current)) - break; - if (time_after(jiffies, expire)) - break; - } - set_current_state(TASK_RUNNING); /* might not be needed */ -} - -static void uart_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct uart_state *state = tty->driver_data; - struct uart_port *port = state->uart_port; - - tty_lock(); - __uart_wait_until_sent(port, timeout); - tty_unlock(); -} - -/* - * This is called with the BKL held in - * linux/drivers/char/tty_io.c:do_tty_hangup() - * We're called from the eventd thread, so we can sleep for - * a _short_ time only. - */ -static void uart_hangup(struct tty_struct *tty) -{ - struct uart_state *state = tty->driver_data; - struct tty_port *port = &state->port; - unsigned long flags; - - BUG_ON(!tty_locked()); - pr_debug("uart_hangup(%d)\n", state->uart_port->line); - - mutex_lock(&port->mutex); - if (port->flags & ASYNC_NORMAL_ACTIVE) { - uart_flush_buffer(tty); - uart_shutdown(tty, state); - spin_lock_irqsave(&port->lock, flags); - port->count = 0; - clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); - spin_unlock_irqrestore(&port->lock, flags); - tty_port_tty_set(port, NULL); - wake_up_interruptible(&port->open_wait); - wake_up_interruptible(&port->delta_msr_wait); - } - mutex_unlock(&port->mutex); -} - -/** - * uart_update_termios - update the terminal hw settings - * @tty: tty associated with UART - * @state: UART to update - * - * Copy across the serial console cflag setting into the termios settings - * for the initial open of the port. This allows continuity between the - * kernel settings, and the settings init adopts when it opens the port - * for the first time. - */ -static void uart_update_termios(struct tty_struct *tty, - struct uart_state *state) -{ - struct uart_port *port = state->uart_port; - - if (uart_console(port) && port->cons->cflag) { - tty->termios->c_cflag = port->cons->cflag; - port->cons->cflag = 0; - } - - /* - * If the device failed to grab its irq resources, - * or some other error occurred, don't try to talk - * to the port hardware. - */ - if (!(tty->flags & (1 << TTY_IO_ERROR))) { - /* - * Make termios settings take effect. - */ - uart_change_speed(tty, state, NULL); - - /* - * And finally enable the RTS and DTR signals. - */ - if (tty->termios->c_cflag & CBAUD) - uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS); - } -} - -static int uart_carrier_raised(struct tty_port *port) -{ - struct uart_state *state = container_of(port, struct uart_state, port); - struct uart_port *uport = state->uart_port; - int mctrl; - spin_lock_irq(&uport->lock); - uport->ops->enable_ms(uport); - mctrl = uport->ops->get_mctrl(uport); - spin_unlock_irq(&uport->lock); - if (mctrl & TIOCM_CAR) - return 1; - return 0; -} - -static void uart_dtr_rts(struct tty_port *port, int onoff) -{ - struct uart_state *state = container_of(port, struct uart_state, port); - struct uart_port *uport = state->uart_port; - - if (onoff) { - uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS); - - /* - * If this is the first open to succeed, - * adjust things to suit. - */ - if (!test_and_set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags)) - uart_update_termios(port->tty, state); - } - else - uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); -} - -static struct uart_state *uart_get(struct uart_driver *drv, int line) -{ - struct uart_state *state; - struct tty_port *port; - int ret = 0; - - state = drv->state + line; - port = &state->port; - if (mutex_lock_interruptible(&port->mutex)) { - ret = -ERESTARTSYS; - goto err; - } - - port->count++; - if (!state->uart_port || state->uart_port->flags & UPF_DEAD) { - ret = -ENXIO; - goto err_unlock; - } - return state; - - err_unlock: - port->count--; - mutex_unlock(&port->mutex); - err: - return ERR_PTR(ret); -} - -/* - * calls to uart_open are serialised by the BKL in - * fs/char_dev.c:chrdev_open() - * Note that if this fails, then uart_close() _will_ be called. - * - * In time, we want to scrap the "opening nonpresent ports" - * behaviour and implement an alternative way for setserial - * to set base addresses/ports/types. This will allow us to - * get rid of a certain amount of extra tests. - */ -static int uart_open(struct tty_struct *tty, struct file *filp) -{ - struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state; - struct uart_state *state; - struct tty_port *port; - int retval, line = tty->index; - - BUG_ON(!tty_locked()); - pr_debug("uart_open(%d) called\n", line); - - /* - * tty->driver->num won't change, so we won't fail here with - * tty->driver_data set to something non-NULL (and therefore - * we won't get caught by uart_close()). - */ - retval = -ENODEV; - if (line >= tty->driver->num) - goto fail; - - /* - * We take the semaphore inside uart_get to guarantee that we won't - * be re-entered while allocating the state structure, or while we - * request any IRQs that the driver may need. This also has the nice - * side-effect that it delays the action of uart_hangup, so we can - * guarantee that state->port.tty will always contain something - * reasonable. - */ - state = uart_get(drv, line); - if (IS_ERR(state)) { - retval = PTR_ERR(state); - goto fail; - } - port = &state->port; - - /* - * Once we set tty->driver_data here, we are guaranteed that - * uart_close() will decrement the driver module use count. - * Any failures from here onwards should not touch the count. - */ - tty->driver_data = state; - state->uart_port->state = state; - tty->low_latency = (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0; - tty->alt_speed = 0; - tty_port_tty_set(port, tty); - - /* - * If the port is in the middle of closing, bail out now. - */ - if (tty_hung_up_p(filp)) { - retval = -EAGAIN; - port->count--; - mutex_unlock(&port->mutex); - goto fail; - } - - /* - * Make sure the device is in D0 state. - */ - if (port->count == 1) - uart_change_pm(state, 0); - - /* - * Start up the serial port. - */ - retval = uart_startup(tty, state, 0); - - /* - * If we succeeded, wait until the port is ready. - */ - mutex_unlock(&port->mutex); - if (retval == 0) - retval = tty_port_block_til_ready(port, tty, filp); - -fail: - return retval; -} - -static const char *uart_type(struct uart_port *port) -{ - const char *str = NULL; - - if (port->ops->type) - str = port->ops->type(port); - - if (!str) - str = "unknown"; - - return str; -} - -#ifdef CONFIG_PROC_FS - -static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i) -{ - struct uart_state *state = drv->state + i; - struct tty_port *port = &state->port; - int pm_state; - struct uart_port *uport = state->uart_port; - char stat_buf[32]; - unsigned int status; - int mmio; - - if (!uport) - return; - - mmio = uport->iotype >= UPIO_MEM; - seq_printf(m, "%d: uart:%s %s%08llX irq:%d", - uport->line, uart_type(uport), - mmio ? "mmio:0x" : "port:", - mmio ? (unsigned long long)uport->mapbase - : (unsigned long long)uport->iobase, - uport->irq); - - if (uport->type == PORT_UNKNOWN) { - seq_putc(m, '\n'); - return; - } - - if (capable(CAP_SYS_ADMIN)) { - mutex_lock(&port->mutex); - pm_state = state->pm_state; - if (pm_state) - uart_change_pm(state, 0); - spin_lock_irq(&uport->lock); - status = uport->ops->get_mctrl(uport); - spin_unlock_irq(&uport->lock); - if (pm_state) - uart_change_pm(state, pm_state); - mutex_unlock(&port->mutex); - - seq_printf(m, " tx:%d rx:%d", - uport->icount.tx, uport->icount.rx); - if (uport->icount.frame) - seq_printf(m, " fe:%d", - uport->icount.frame); - if (uport->icount.parity) - seq_printf(m, " pe:%d", - uport->icount.parity); - if (uport->icount.brk) - seq_printf(m, " brk:%d", - uport->icount.brk); - if (uport->icount.overrun) - seq_printf(m, " oe:%d", - uport->icount.overrun); - -#define INFOBIT(bit, str) \ - if (uport->mctrl & (bit)) \ - strncat(stat_buf, (str), sizeof(stat_buf) - \ - strlen(stat_buf) - 2) -#define STATBIT(bit, str) \ - if (status & (bit)) \ - strncat(stat_buf, (str), sizeof(stat_buf) - \ - strlen(stat_buf) - 2) - - stat_buf[0] = '\0'; - stat_buf[1] = '\0'; - INFOBIT(TIOCM_RTS, "|RTS"); - STATBIT(TIOCM_CTS, "|CTS"); - INFOBIT(TIOCM_DTR, "|DTR"); - STATBIT(TIOCM_DSR, "|DSR"); - STATBIT(TIOCM_CAR, "|CD"); - STATBIT(TIOCM_RNG, "|RI"); - if (stat_buf[0]) - stat_buf[0] = ' '; - - seq_puts(m, stat_buf); - } - seq_putc(m, '\n'); -#undef STATBIT -#undef INFOBIT -} - -static int uart_proc_show(struct seq_file *m, void *v) -{ - struct tty_driver *ttydrv = m->private; - struct uart_driver *drv = ttydrv->driver_state; - int i; - - seq_printf(m, "serinfo:1.0 driver%s%s revision:%s\n", - "", "", ""); - for (i = 0; i < drv->nr; i++) - uart_line_info(m, drv, i); - return 0; -} - -static int uart_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, uart_proc_show, PDE(inode)->data); -} - -static const struct file_operations uart_proc_fops = { - .owner = THIS_MODULE, - .open = uart_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; -#endif - -#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL) -/* - * uart_console_write - write a console message to a serial port - * @port: the port to write the message - * @s: array of characters - * @count: number of characters in string to write - * @write: function to write character to port - */ -void uart_console_write(struct uart_port *port, const char *s, - unsigned int count, - void (*putchar)(struct uart_port *, int)) -{ - unsigned int i; - - for (i = 0; i < count; i++, s++) { - if (*s == '\n') - putchar(port, '\r'); - putchar(port, *s); - } -} -EXPORT_SYMBOL_GPL(uart_console_write); - -/* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ -struct uart_port * __init -uart_get_console(struct uart_port *ports, int nr, struct console *co) -{ - int idx = co->index; - - if (idx < 0 || idx >= nr || (ports[idx].iobase == 0 && - ports[idx].membase == NULL)) - for (idx = 0; idx < nr; idx++) - if (ports[idx].iobase != 0 || - ports[idx].membase != NULL) - break; - - co->index = idx; - - return ports + idx; -} - -/** - * uart_parse_options - Parse serial port baud/parity/bits/flow contro. - * @options: pointer to option string - * @baud: pointer to an 'int' variable for the baud rate. - * @parity: pointer to an 'int' variable for the parity. - * @bits: pointer to an 'int' variable for the number of data bits. - * @flow: pointer to an 'int' variable for the flow control character. - * - * uart_parse_options decodes a string containing the serial console - * options. The format of the string is , - * eg: 115200n8r - */ -void -uart_parse_options(char *options, int *baud, int *parity, int *bits, int *flow) -{ - char *s = options; - - *baud = simple_strtoul(s, NULL, 10); - while (*s >= '0' && *s <= '9') - s++; - if (*s) - *parity = *s++; - if (*s) - *bits = *s++ - '0'; - if (*s) - *flow = *s; -} -EXPORT_SYMBOL_GPL(uart_parse_options); - -struct baud_rates { - unsigned int rate; - unsigned int cflag; -}; - -static const struct baud_rates baud_rates[] = { - { 921600, B921600 }, - { 460800, B460800 }, - { 230400, B230400 }, - { 115200, B115200 }, - { 57600, B57600 }, - { 38400, B38400 }, - { 19200, B19200 }, - { 9600, B9600 }, - { 4800, B4800 }, - { 2400, B2400 }, - { 1200, B1200 }, - { 0, B38400 } -}; - -/** - * uart_set_options - setup the serial console parameters - * @port: pointer to the serial ports uart_port structure - * @co: console pointer - * @baud: baud rate - * @parity: parity character - 'n' (none), 'o' (odd), 'e' (even) - * @bits: number of data bits - * @flow: flow control character - 'r' (rts) - */ -int -uart_set_options(struct uart_port *port, struct console *co, - int baud, int parity, int bits, int flow) -{ - struct ktermios termios; - static struct ktermios dummy; - int i; - - /* - * Ensure that the serial console lock is initialised - * early. - */ - spin_lock_init(&port->lock); - lockdep_set_class(&port->lock, &port_lock_key); - - memset(&termios, 0, sizeof(struct ktermios)); - - termios.c_cflag = CREAD | HUPCL | CLOCAL; - - /* - * Construct a cflag setting. - */ - for (i = 0; baud_rates[i].rate; i++) - if (baud_rates[i].rate <= baud) - break; - - termios.c_cflag |= baud_rates[i].cflag; - - if (bits == 7) - termios.c_cflag |= CS7; - else - termios.c_cflag |= CS8; - - switch (parity) { - case 'o': case 'O': - termios.c_cflag |= PARODD; - /*fall through*/ - case 'e': case 'E': - termios.c_cflag |= PARENB; - break; - } - - if (flow == 'r') - termios.c_cflag |= CRTSCTS; - - /* - * some uarts on other side don't support no flow control. - * So we set * DTR in host uart to make them happy - */ - port->mctrl |= TIOCM_DTR; - - port->ops->set_termios(port, &termios, &dummy); - /* - * Allow the setting of the UART parameters with a NULL console - * too: - */ - if (co) - co->cflag = termios.c_cflag; - - return 0; -} -EXPORT_SYMBOL_GPL(uart_set_options); -#endif /* CONFIG_SERIAL_CORE_CONSOLE */ - -static void uart_change_pm(struct uart_state *state, int pm_state) -{ - struct uart_port *port = state->uart_port; - - if (state->pm_state != pm_state) { - if (port->ops->pm) - port->ops->pm(port, pm_state, state->pm_state); - state->pm_state = pm_state; - } -} - -struct uart_match { - struct uart_port *port; - struct uart_driver *driver; -}; - -static int serial_match_port(struct device *dev, void *data) -{ - struct uart_match *match = data; - struct tty_driver *tty_drv = match->driver->tty_driver; - dev_t devt = MKDEV(tty_drv->major, tty_drv->minor_start) + - match->port->line; - - return dev->devt == devt; /* Actually, only one tty per port */ -} - -int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) -{ - struct uart_state *state = drv->state + uport->line; - struct tty_port *port = &state->port; - struct device *tty_dev; - struct uart_match match = {uport, drv}; - struct tty_struct *tty; - - mutex_lock(&port->mutex); - - /* Must be inside the mutex lock until we convert to tty_port */ - tty = port->tty; - - tty_dev = device_find_child(uport->dev, &match, serial_match_port); - if (device_may_wakeup(tty_dev)) { - if (!enable_irq_wake(uport->irq)) - uport->irq_wake = 1; - put_device(tty_dev); - mutex_unlock(&port->mutex); - return 0; - } - if (console_suspend_enabled || !uart_console(uport)) - uport->suspended = 1; - - if (port->flags & ASYNC_INITIALIZED) { - const struct uart_ops *ops = uport->ops; - int tries; - - if (console_suspend_enabled || !uart_console(uport)) { - set_bit(ASYNCB_SUSPENDED, &port->flags); - clear_bit(ASYNCB_INITIALIZED, &port->flags); - - spin_lock_irq(&uport->lock); - ops->stop_tx(uport); - ops->set_mctrl(uport, 0); - ops->stop_rx(uport); - spin_unlock_irq(&uport->lock); - } - - /* - * Wait for the transmitter to empty. - */ - for (tries = 3; !ops->tx_empty(uport) && tries; tries--) - msleep(10); - if (!tries) - printk(KERN_ERR "%s%s%s%d: Unable to drain " - "transmitter\n", - uport->dev ? dev_name(uport->dev) : "", - uport->dev ? ": " : "", - drv->dev_name, - drv->tty_driver->name_base + uport->line); - - if (console_suspend_enabled || !uart_console(uport)) - ops->shutdown(uport); - } - - /* - * Disable the console device before suspending. - */ - if (console_suspend_enabled && uart_console(uport)) - console_stop(uport->cons); - - if (console_suspend_enabled || !uart_console(uport)) - uart_change_pm(state, 3); - - mutex_unlock(&port->mutex); - - return 0; -} - -int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) -{ - struct uart_state *state = drv->state + uport->line; - struct tty_port *port = &state->port; - struct device *tty_dev; - struct uart_match match = {uport, drv}; - struct ktermios termios; - - mutex_lock(&port->mutex); - - tty_dev = device_find_child(uport->dev, &match, serial_match_port); - if (!uport->suspended && device_may_wakeup(tty_dev)) { - if (uport->irq_wake) { - disable_irq_wake(uport->irq); - uport->irq_wake = 0; - } - mutex_unlock(&port->mutex); - return 0; - } - uport->suspended = 0; - - /* - * Re-enable the console device after suspending. - */ - if (console_suspend_enabled && uart_console(uport)) { - /* - * First try to use the console cflag setting. - */ - memset(&termios, 0, sizeof(struct ktermios)); - termios.c_cflag = uport->cons->cflag; - - /* - * If that's unset, use the tty termios setting. - */ - if (port->tty && port->tty->termios && termios.c_cflag == 0) - termios = *(port->tty->termios); - - uart_change_pm(state, 0); - uport->ops->set_termios(uport, &termios, NULL); - console_start(uport->cons); - } - - if (port->flags & ASYNC_SUSPENDED) { - const struct uart_ops *ops = uport->ops; - int ret; - - uart_change_pm(state, 0); - spin_lock_irq(&uport->lock); - ops->set_mctrl(uport, 0); - spin_unlock_irq(&uport->lock); - if (console_suspend_enabled || !uart_console(uport)) { - /* Protected by port mutex for now */ - struct tty_struct *tty = port->tty; - ret = ops->startup(uport); - if (ret == 0) { - if (tty) - uart_change_speed(tty, state, NULL); - spin_lock_irq(&uport->lock); - ops->set_mctrl(uport, uport->mctrl); - ops->start_tx(uport); - spin_unlock_irq(&uport->lock); - set_bit(ASYNCB_INITIALIZED, &port->flags); - } else { - /* - * Failed to resume - maybe hardware went away? - * Clear the "initialized" flag so we won't try - * to call the low level drivers shutdown method. - */ - uart_shutdown(tty, state); - } - } - - clear_bit(ASYNCB_SUSPENDED, &port->flags); - } - - mutex_unlock(&port->mutex); - - return 0; -} - -static inline void -uart_report_port(struct uart_driver *drv, struct uart_port *port) -{ - char address[64]; - - switch (port->iotype) { - case UPIO_PORT: - snprintf(address, sizeof(address), "I/O 0x%lx", port->iobase); - break; - case UPIO_HUB6: - snprintf(address, sizeof(address), - "I/O 0x%lx offset 0x%x", port->iobase, port->hub6); - break; - case UPIO_MEM: - case UPIO_MEM32: - case UPIO_AU: - case UPIO_TSI: - case UPIO_DWAPB: - case UPIO_DWAPB32: - snprintf(address, sizeof(address), - "MMIO 0x%llx", (unsigned long long)port->mapbase); - break; - default: - strlcpy(address, "*unknown*", sizeof(address)); - break; - } - - printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n", - port->dev ? dev_name(port->dev) : "", - port->dev ? ": " : "", - drv->dev_name, - drv->tty_driver->name_base + port->line, - address, port->irq, uart_type(port)); -} - -static void -uart_configure_port(struct uart_driver *drv, struct uart_state *state, - struct uart_port *port) -{ - unsigned int flags; - - /* - * If there isn't a port here, don't do anything further. - */ - if (!port->iobase && !port->mapbase && !port->membase) - return; - - /* - * Now do the auto configuration stuff. Note that config_port - * is expected to claim the resources and map the port for us. - */ - flags = 0; - if (port->flags & UPF_AUTO_IRQ) - flags |= UART_CONFIG_IRQ; - if (port->flags & UPF_BOOT_AUTOCONF) { - if (!(port->flags & UPF_FIXED_TYPE)) { - port->type = PORT_UNKNOWN; - flags |= UART_CONFIG_TYPE; - } - port->ops->config_port(port, flags); - } - - if (port->type != PORT_UNKNOWN) { - unsigned long flags; - - uart_report_port(drv, port); - - /* Power up port for set_mctrl() */ - uart_change_pm(state, 0); - - /* - * Ensure that the modem control lines are de-activated. - * keep the DTR setting that is set in uart_set_options() - * We probably don't need a spinlock around this, but - */ - spin_lock_irqsave(&port->lock, flags); - port->ops->set_mctrl(port, port->mctrl & TIOCM_DTR); - spin_unlock_irqrestore(&port->lock, flags); - - /* - * If this driver supports console, and it hasn't been - * successfully registered yet, try to re-register it. - * It may be that the port was not available. - */ - if (port->cons && !(port->cons->flags & CON_ENABLED)) - register_console(port->cons); - - /* - * Power down all ports by default, except the - * console if we have one. - */ - if (!uart_console(port)) - uart_change_pm(state, 3); - } -} - -#ifdef CONFIG_CONSOLE_POLL - -static int uart_poll_init(struct tty_driver *driver, int line, char *options) -{ - struct uart_driver *drv = driver->driver_state; - struct uart_state *state = drv->state + line; - struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (!state || !state->uart_port) - return -1; - - port = state->uart_port; - if (!(port->ops->poll_get_char && port->ops->poll_put_char)) - return -1; - - if (options) { - uart_parse_options(options, &baud, &parity, &bits, &flow); - return uart_set_options(port, NULL, baud, parity, bits, flow); - } - - return 0; -} - -static int uart_poll_get_char(struct tty_driver *driver, int line) -{ - struct uart_driver *drv = driver->driver_state; - struct uart_state *state = drv->state + line; - struct uart_port *port; - - if (!state || !state->uart_port) - return -1; - - port = state->uart_port; - return port->ops->poll_get_char(port); -} - -static void uart_poll_put_char(struct tty_driver *driver, int line, char ch) -{ - struct uart_driver *drv = driver->driver_state; - struct uart_state *state = drv->state + line; - struct uart_port *port; - - if (!state || !state->uart_port) - return; - - port = state->uart_port; - port->ops->poll_put_char(port, ch); -} -#endif - -static const struct tty_operations uart_ops = { - .open = uart_open, - .close = uart_close, - .write = uart_write, - .put_char = uart_put_char, - .flush_chars = uart_flush_chars, - .write_room = uart_write_room, - .chars_in_buffer= uart_chars_in_buffer, - .flush_buffer = uart_flush_buffer, - .ioctl = uart_ioctl, - .throttle = uart_throttle, - .unthrottle = uart_unthrottle, - .send_xchar = uart_send_xchar, - .set_termios = uart_set_termios, - .set_ldisc = uart_set_ldisc, - .stop = uart_stop, - .start = uart_start, - .hangup = uart_hangup, - .break_ctl = uart_break_ctl, - .wait_until_sent= uart_wait_until_sent, -#ifdef CONFIG_PROC_FS - .proc_fops = &uart_proc_fops, -#endif - .tiocmget = uart_tiocmget, - .tiocmset = uart_tiocmset, - .get_icount = uart_get_icount, -#ifdef CONFIG_CONSOLE_POLL - .poll_init = uart_poll_init, - .poll_get_char = uart_poll_get_char, - .poll_put_char = uart_poll_put_char, -#endif -}; - -static const struct tty_port_operations uart_port_ops = { - .carrier_raised = uart_carrier_raised, - .dtr_rts = uart_dtr_rts, -}; - -/** - * uart_register_driver - register a driver with the uart core layer - * @drv: low level driver structure - * - * Register a uart driver with the core driver. We in turn register - * with the tty layer, and initialise the core driver per-port state. - * - * We have a proc file in /proc/tty/driver which is named after the - * normal driver. - * - * drv->port should be NULL, and the per-port structures should be - * registered using uart_add_one_port after this call has succeeded. - */ -int uart_register_driver(struct uart_driver *drv) -{ - struct tty_driver *normal; - int i, retval; - - BUG_ON(drv->state); - - /* - * Maybe we should be using a slab cache for this, especially if - * we have a large number of ports to handle. - */ - drv->state = kzalloc(sizeof(struct uart_state) * drv->nr, GFP_KERNEL); - if (!drv->state) - goto out; - - normal = alloc_tty_driver(drv->nr); - if (!normal) - goto out_kfree; - - drv->tty_driver = normal; - - normal->owner = drv->owner; - normal->driver_name = drv->driver_name; - normal->name = drv->dev_name; - normal->major = drv->major; - normal->minor_start = drv->minor; - normal->type = TTY_DRIVER_TYPE_SERIAL; - normal->subtype = SERIAL_TYPE_NORMAL; - normal->init_termios = tty_std_termios; - normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - normal->init_termios.c_ispeed = normal->init_termios.c_ospeed = 9600; - normal->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - normal->driver_state = drv; - tty_set_operations(normal, &uart_ops); - - /* - * Initialise the UART state(s). - */ - for (i = 0; i < drv->nr; i++) { - struct uart_state *state = drv->state + i; - struct tty_port *port = &state->port; - - tty_port_init(port); - port->ops = &uart_port_ops; - port->close_delay = 500; /* .5 seconds */ - port->closing_wait = 30000; /* 30 seconds */ - tasklet_init(&state->tlet, uart_tasklet_action, - (unsigned long)state); - } - - retval = tty_register_driver(normal); - if (retval >= 0) - return retval; - - put_tty_driver(normal); -out_kfree: - kfree(drv->state); -out: - return -ENOMEM; -} - -/** - * uart_unregister_driver - remove a driver from the uart core layer - * @drv: low level driver structure - * - * Remove all references to a driver from the core driver. The low - * level driver must have removed all its ports via the - * uart_remove_one_port() if it registered them with uart_add_one_port(). - * (ie, drv->port == NULL) - */ -void uart_unregister_driver(struct uart_driver *drv) -{ - struct tty_driver *p = drv->tty_driver; - tty_unregister_driver(p); - put_tty_driver(p); - kfree(drv->state); - drv->tty_driver = NULL; -} - -struct tty_driver *uart_console_device(struct console *co, int *index) -{ - struct uart_driver *p = co->data; - *index = co->index; - return p->tty_driver; -} - -/** - * uart_add_one_port - attach a driver-defined port structure - * @drv: pointer to the uart low level driver structure for this port - * @uport: uart port structure to use for this port. - * - * This allows the driver to register its own uart_port structure - * with the core driver. The main purpose is to allow the low - * level uart drivers to expand uart_port, rather than having yet - * more levels of structures. - */ -int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) -{ - struct uart_state *state; - struct tty_port *port; - int ret = 0; - struct device *tty_dev; - - BUG_ON(in_interrupt()); - - if (uport->line >= drv->nr) - return -EINVAL; - - state = drv->state + uport->line; - port = &state->port; - - mutex_lock(&port_mutex); - mutex_lock(&port->mutex); - if (state->uart_port) { - ret = -EINVAL; - goto out; - } - - state->uart_port = uport; - state->pm_state = -1; - - uport->cons = drv->cons; - uport->state = state; - - /* - * If this port is a console, then the spinlock is already - * initialised. - */ - if (!(uart_console(uport) && (uport->cons->flags & CON_ENABLED))) { - spin_lock_init(&uport->lock); - lockdep_set_class(&uport->lock, &port_lock_key); - } - - uart_configure_port(drv, state, uport); - - /* - * Register the port whether it's detected or not. This allows - * setserial to be used to alter this ports parameters. - */ - tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev); - if (likely(!IS_ERR(tty_dev))) { - device_init_wakeup(tty_dev, 1); - device_set_wakeup_enable(tty_dev, 0); - } else - printk(KERN_ERR "Cannot register tty device on line %d\n", - uport->line); - - /* - * Ensure UPF_DEAD is not set. - */ - uport->flags &= ~UPF_DEAD; - - out: - mutex_unlock(&port->mutex); - mutex_unlock(&port_mutex); - - return ret; -} - -/** - * uart_remove_one_port - detach a driver defined port structure - * @drv: pointer to the uart low level driver structure for this port - * @uport: uart port structure for this port - * - * This unhooks (and hangs up) the specified port structure from the - * core driver. No further calls will be made to the low-level code - * for this port. - */ -int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) -{ - struct uart_state *state = drv->state + uport->line; - struct tty_port *port = &state->port; - - BUG_ON(in_interrupt()); - - if (state->uart_port != uport) - printk(KERN_ALERT "Removing wrong port: %p != %p\n", - state->uart_port, uport); - - mutex_lock(&port_mutex); - - /* - * Mark the port "dead" - this prevents any opens from - * succeeding while we shut down the port. - */ - mutex_lock(&port->mutex); - uport->flags |= UPF_DEAD; - mutex_unlock(&port->mutex); - - /* - * Remove the devices from the tty layer - */ - tty_unregister_device(drv->tty_driver, uport->line); - - if (port->tty) - tty_vhangup(port->tty); - - /* - * Free the port IO and memory resources, if any. - */ - if (uport->type != PORT_UNKNOWN) - uport->ops->release_port(uport); - - /* - * Indicate that there isn't a port here anymore. - */ - uport->type = PORT_UNKNOWN; - - /* - * Kill the tasklet, and free resources. - */ - tasklet_kill(&state->tlet); - - state->uart_port = NULL; - mutex_unlock(&port_mutex); - - return 0; -} - -/* - * Are the two ports equivalent? - */ -int uart_match_port(struct uart_port *port1, struct uart_port *port2) -{ - if (port1->iotype != port2->iotype) - return 0; - - switch (port1->iotype) { - case UPIO_PORT: - return (port1->iobase == port2->iobase); - case UPIO_HUB6: - return (port1->iobase == port2->iobase) && - (port1->hub6 == port2->hub6); - case UPIO_MEM: - case UPIO_MEM32: - case UPIO_AU: - case UPIO_TSI: - case UPIO_DWAPB: - case UPIO_DWAPB32: - return (port1->mapbase == port2->mapbase); - } - return 0; -} -EXPORT_SYMBOL(uart_match_port); - -EXPORT_SYMBOL(uart_write_wakeup); -EXPORT_SYMBOL(uart_register_driver); -EXPORT_SYMBOL(uart_unregister_driver); -EXPORT_SYMBOL(uart_suspend_port); -EXPORT_SYMBOL(uart_resume_port); -EXPORT_SYMBOL(uart_add_one_port); -EXPORT_SYMBOL(uart_remove_one_port); - -MODULE_DESCRIPTION("Serial driver core"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c deleted file mode 100644 index 93760b2ea172..000000000000 --- a/drivers/serial/serial_cs.c +++ /dev/null @@ -1,869 +0,0 @@ -/*====================================================================== - - A driver for PCMCIA serial devices - - serial_cs.c 1.134 2002/05/04 05:48:53 - - The contents of this file are subject to the Mozilla Public - License Version 1.1 (the "License"); you may not use this file - except in compliance with the License. You may obtain a copy of - the License at http://www.mozilla.org/MPL/ - - Software distributed under the License is distributed on an "AS - IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or - implied. See the License for the specific language governing - rights and limitations under the License. - - The initial developer of the original code is David A. Hinds - . Portions created by David A. Hinds - are Copyright (C) 1999 David A. Hinds. All Rights Reserved. - - Alternatively, the contents of this file may be used under the - terms of the GNU General Public License version 2 (the "GPL"), in which - case the provisions of the GPL are applicable instead of the - above. If you wish to allow the use of your version of this file - only under the terms of the GPL and not to allow others to use - your version of this file under the MPL, indicate your decision - by deleting the provisions above and replace them with the notice - and other provisions required by the GPL. If you do not delete - the provisions above, a recipient may use your version of this - file under either the MPL or the GPL. - -======================================================================*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "8250.h" - - -/*====================================================================*/ - -/* Parameters that can be set with 'insmod' */ - -/* Enable the speaker? */ -static int do_sound = 1; -/* Skip strict UART tests? */ -static int buggy_uart; - -module_param(do_sound, int, 0444); -module_param(buggy_uart, int, 0444); - -/*====================================================================*/ - -/* Table of multi-port card ID's */ - -struct serial_quirk { - unsigned int manfid; - unsigned int prodid; - int multi; /* 1 = multifunction, > 1 = # ports */ - void (*config)(struct pcmcia_device *); - void (*setup)(struct pcmcia_device *, struct uart_port *); - void (*wakeup)(struct pcmcia_device *); - int (*post)(struct pcmcia_device *); -}; - -struct serial_info { - struct pcmcia_device *p_dev; - int ndev; - int multi; - int slave; - int manfid; - int prodid; - int c950ctrl; - int line[4]; - const struct serial_quirk *quirk; -}; - -struct serial_cfg_mem { - tuple_t tuple; - cisparse_t parse; - u_char buf[256]; -}; - -/* - * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6" - * manfid 0x0160, 0x0104 - * This card appears to have a 14.7456MHz clock. - */ -/* Generic Modem: MD55x (GPRS/EDGE) have - * Elan VPU16551 UART with 14.7456MHz oscillator - * manfid 0x015D, 0x4C45 - */ -static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port) -{ - port->uartclk = 14745600; -} - -static int quirk_post_ibm(struct pcmcia_device *link) -{ - u8 val; - int ret; - - ret = pcmcia_read_config_byte(link, 0x800, &val); - if (ret) - goto failed; - - ret = pcmcia_write_config_byte(link, 0x800, val | 1); - if (ret) - goto failed; - return 0; - - failed: - return -ENODEV; -} - -/* - * Nokia cards are not really multiport cards. Shouldn't this - * be handled by setting the quirk entry .multi = 0 | 1 ? - */ -static void quirk_config_nokia(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - - if (info->multi > 1) - info->multi = 1; -} - -static void quirk_wakeup_oxsemi(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - - if (info->c950ctrl) - outb(12, info->c950ctrl + 1); -} - -/* request_region? oxsemi branch does no request_region too... */ -/* - * This sequence is needed to properly initialize MC45 attached to OXCF950. - * I tried decreasing these msleep()s, but it worked properly (survived - * 1000 stop/start operations) with these timeouts (or bigger). - */ -static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - unsigned int ctrl = info->c950ctrl; - - outb(0xA, ctrl + 1); - msleep(100); - outb(0xE, ctrl + 1); - msleep(300); - outb(0xC, ctrl + 1); - msleep(100); - outb(0xE, ctrl + 1); - msleep(200); - outb(0xF, ctrl + 1); - msleep(100); - outb(0xE, ctrl + 1); - msleep(100); - outb(0xC, ctrl + 1); -} - -/* - * Socket Dual IO: this enables irq's for second port - */ -static void quirk_config_socket(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - - if (info->multi) - link->config_flags |= CONF_ENABLE_ESR; -} - -static const struct serial_quirk quirks[] = { - { - .manfid = 0x0160, - .prodid = 0x0104, - .multi = -1, - .setup = quirk_setup_brainboxes_0104, - }, { - .manfid = 0x015D, - .prodid = 0x4C45, - .multi = -1, - .setup = quirk_setup_brainboxes_0104, - }, { - .manfid = MANFID_IBM, - .prodid = ~0, - .multi = -1, - .post = quirk_post_ibm, - }, { - .manfid = MANFID_INTEL, - .prodid = PRODID_INTEL_DUAL_RS232, - .multi = 2, - }, { - .manfid = MANFID_NATINST, - .prodid = PRODID_NATINST_QUAD_RS232, - .multi = 4, - }, { - .manfid = MANFID_NOKIA, - .prodid = ~0, - .multi = -1, - .config = quirk_config_nokia, - }, { - .manfid = MANFID_OMEGA, - .prodid = PRODID_OMEGA_QSP_100, - .multi = 4, - }, { - .manfid = MANFID_OXSEMI, - .prodid = ~0, - .multi = -1, - .wakeup = quirk_wakeup_oxsemi, - }, { - .manfid = MANFID_POSSIO, - .prodid = PRODID_POSSIO_GCC, - .multi = -1, - .wakeup = quirk_wakeup_possio_gcc, - }, { - .manfid = MANFID_QUATECH, - .prodid = PRODID_QUATECH_DUAL_RS232, - .multi = 2, - }, { - .manfid = MANFID_QUATECH, - .prodid = PRODID_QUATECH_DUAL_RS232_D1, - .multi = 2, - }, { - .manfid = MANFID_QUATECH, - .prodid = PRODID_QUATECH_DUAL_RS232_G, - .multi = 2, - }, { - .manfid = MANFID_QUATECH, - .prodid = PRODID_QUATECH_QUAD_RS232, - .multi = 4, - }, { - .manfid = MANFID_SOCKET, - .prodid = PRODID_SOCKET_DUAL_RS232, - .multi = 2, - .config = quirk_config_socket, - }, { - .manfid = MANFID_SOCKET, - .prodid = ~0, - .multi = -1, - .config = quirk_config_socket, - } -}; - - -static int serial_config(struct pcmcia_device * link); - - -static void serial_remove(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - int i; - - dev_dbg(&link->dev, "serial_release\n"); - - /* - * Recheck to see if the device is still configured. - */ - for (i = 0; i < info->ndev; i++) - serial8250_unregister_port(info->line[i]); - - if (!info->slave) - pcmcia_disable_device(link); -} - -static int serial_suspend(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - int i; - - for (i = 0; i < info->ndev; i++) - serial8250_suspend_port(info->line[i]); - - return 0; -} - -static int serial_resume(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - int i; - - for (i = 0; i < info->ndev; i++) - serial8250_resume_port(info->line[i]); - - if (info->quirk && info->quirk->wakeup) - info->quirk->wakeup(link); - - return 0; -} - -static int serial_probe(struct pcmcia_device *link) -{ - struct serial_info *info; - - dev_dbg(&link->dev, "serial_attach()\n"); - - /* Create new serial device */ - info = kzalloc(sizeof (*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - info->p_dev = link; - link->priv = info; - - link->config_flags |= CONF_ENABLE_IRQ; - if (do_sound) - link->config_flags |= CONF_ENABLE_SPKR; - - return serial_config(link); -} - -static void serial_detach(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - - dev_dbg(&link->dev, "serial_detach\n"); - - /* - * Ensure that the ports have been released. - */ - serial_remove(link); - - /* free bits */ - kfree(info); -} - -/*====================================================================*/ - -static int setup_serial(struct pcmcia_device *handle, struct serial_info * info, - unsigned int iobase, int irq) -{ - struct uart_port port; - int line; - - memset(&port, 0, sizeof (struct uart_port)); - port.iobase = iobase; - port.irq = irq; - port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; - port.uartclk = 1843200; - port.dev = &handle->dev; - if (buggy_uart) - port.flags |= UPF_BUGGY_UART; - - if (info->quirk && info->quirk->setup) - info->quirk->setup(handle, &port); - - line = serial8250_register_port(&port); - if (line < 0) { - printk(KERN_NOTICE "serial_cs: serial8250_register_port() at " - "0x%04lx, irq %d failed\n", (u_long)iobase, irq); - return -EINVAL; - } - - info->line[info->ndev] = line; - info->ndev++; - - return 0; -} - -/*====================================================================*/ - -static int pfc_config(struct pcmcia_device *p_dev) -{ - unsigned int port = 0; - struct serial_info *info = p_dev->priv; - - if ((p_dev->resource[1]->end != 0) && - (resource_size(p_dev->resource[1]) == 8)) { - port = p_dev->resource[1]->start; - info->slave = 1; - } else if ((info->manfid == MANFID_OSITECH) && - (resource_size(p_dev->resource[0]) == 0x40)) { - port = p_dev->resource[0]->start + 0x28; - info->slave = 1; - } - if (info->slave) - return setup_serial(p_dev, info, port, p_dev->irq); - - dev_warn(&p_dev->dev, "no usable port range found, giving up\n"); - return -ENODEV; -} - -static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data) -{ - static const int size_table[2] = { 8, 16 }; - int *try = priv_data; - - if (p_dev->resource[0]->start == 0) - return -ENODEV; - - if ((*try & 0x1) == 0) - p_dev->io_lines = 16; - - if (p_dev->resource[0]->end != size_table[(*try >> 1)]) - return -ENODEV; - - p_dev->resource[0]->end = 8; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - - return pcmcia_request_io(p_dev); -} - -static int simple_config_check_notpicky(struct pcmcia_device *p_dev, - void *priv_data) -{ - static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; - int j; - - if (p_dev->io_lines > 3) - return -ENODEV; - - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[0]->end = 8; - - for (j = 0; j < 5; j++) { - p_dev->resource[0]->start = base[j]; - p_dev->io_lines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; -} - -static int simple_config(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - int i = -ENODEV, try; - - /* First pass: look for a config entry that looks normal. - * Two tries: without IO aliases, then with aliases */ - link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_SET_IO; - for (try = 0; try < 4; try++) - if (!pcmcia_loop_config(link, simple_config_check, &try)) - goto found_port; - - /* Second pass: try to find an entry that isn't picky about - its base address, then try to grab any standard serial port - address, and finally try to get any free port. */ - if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) - goto found_port; - - dev_warn(&link->dev, "no usable port range found, giving up\n"); - return -1; - -found_port: - if (info->multi && (info->manfid == MANFID_3COM)) - link->config_index &= ~(0x08); - - /* - * Apply any configuration quirks. - */ - if (info->quirk && info->quirk->config) - info->quirk->config(link); - - i = pcmcia_enable_device(link); - if (i != 0) - return -1; - return setup_serial(link, info, link->resource[0]->start, link->irq); -} - -static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) -{ - int *multi = priv_data; - - if (p_dev->resource[1]->end) - return -EINVAL; - - /* The quad port cards have bad CIS's, so just look for a - window larger than 8 ports and assume it will be right */ - if (p_dev->resource[0]->end <= 8) - return -EINVAL; - - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[0]->end = *multi * 8; - - if (pcmcia_request_io(p_dev)) - return -ENODEV; - return 0; -} - -static int multi_config_check_notpicky(struct pcmcia_device *p_dev, - void *priv_data) -{ - int *base2 = priv_data; - - if (!p_dev->resource[0]->end || !p_dev->resource[1]->end) - return -ENODEV; - - p_dev->resource[0]->end = p_dev->resource[1]->end = 8; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - - if (pcmcia_request_io(p_dev)) - return -ENODEV; - - *base2 = p_dev->resource[0]->start + 8; - return 0; -} - -static int multi_config(struct pcmcia_device *link) -{ - struct serial_info *info = link->priv; - int i, base2 = 0; - - link->config_flags |= CONF_AUTO_SET_IO; - /* First, look for a generic full-sized window */ - if (!pcmcia_loop_config(link, multi_config_check, &info->multi)) - base2 = link->resource[0]->start + 8; - else { - /* If that didn't work, look for two windows */ - info->multi = 2; - if (pcmcia_loop_config(link, multi_config_check_notpicky, - &base2)) { - dev_warn(&link->dev, "no usable port range " - "found, giving up\n"); - return -ENODEV; - } - } - - if (!link->irq) - dev_warn(&link->dev, "no usable IRQ found, continuing...\n"); - - /* - * Apply any configuration quirks. - */ - if (info->quirk && info->quirk->config) - info->quirk->config(link); - - i = pcmcia_enable_device(link); - if (i != 0) - return -ENODEV; - - /* The Oxford Semiconductor OXCF950 cards are in fact single-port: - * 8 registers are for the UART, the others are extra registers. - * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. - */ - if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && - info->prodid == PRODID_POSSIO_GCC)) { - int err; - - if (link->config_index == 1 || - link->config_index == 3) { - err = setup_serial(link, info, base2, - link->irq); - base2 = link->resource[0]->start; - } else { - err = setup_serial(link, info, link->resource[0]->start, - link->irq); - } - info->c950ctrl = base2; - - /* - * FIXME: We really should wake up the port prior to - * handing it over to the serial layer. - */ - if (info->quirk && info->quirk->wakeup) - info->quirk->wakeup(link); - - return 0; - } - - setup_serial(link, info, link->resource[0]->start, link->irq); - for (i = 0; i < info->multi - 1; i++) - setup_serial(link, info, base2 + (8 * i), - link->irq); - return 0; -} - -static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data) -{ - struct serial_info *info = p_dev->priv; - - if (!p_dev->resource[0]->end) - return -EINVAL; - - if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0)) - info->multi = p_dev->resource[0]->end >> 3; - - if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8) - && (p_dev->resource[1]->end == 8)) - info->multi = 2; - - return 0; /* break */ -} - - -static int serial_config(struct pcmcia_device * link) -{ - struct serial_info *info = link->priv; - int i; - - dev_dbg(&link->dev, "serial_config\n"); - - /* Is this a compliant multifunction card? */ - info->multi = (link->socket->functions > 1); - - /* Is this a multiport card? */ - info->manfid = link->manf_id; - info->prodid = link->card_id; - - for (i = 0; i < ARRAY_SIZE(quirks); i++) - if ((quirks[i].manfid == ~0 || - quirks[i].manfid == info->manfid) && - (quirks[i].prodid == ~0 || - quirks[i].prodid == info->prodid)) { - info->quirk = &quirks[i]; - break; - } - - /* Another check for dual-serial cards: look for either serial or - multifunction cards that ask for appropriate IO port ranges */ - if ((info->multi == 0) && - (link->has_func_id) && - (link->socket->pcmcia_pfc == 0) && - ((link->func_id == CISTPL_FUNCID_MULTI) || - (link->func_id == CISTPL_FUNCID_SERIAL))) - pcmcia_loop_config(link, serial_check_for_multi, info); - - /* - * Apply any multi-port quirk. - */ - if (info->quirk && info->quirk->multi != -1) - info->multi = info->quirk->multi; - - dev_info(&link->dev, - "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n", - link->manf_id, link->card_id, - link->socket->pcmcia_pfc, info->multi, info->quirk); - if (link->socket->pcmcia_pfc) - i = pfc_config(link); - else if (info->multi > 1) - i = multi_config(link); - else - i = simple_config(link); - - if (i || info->ndev == 0) - goto failed; - - /* - * Apply any post-init quirk. FIXME: This should really happen - * before we register the port, since it might already be in use. - */ - if (info->quirk && info->quirk->post) - if (info->quirk->post(link)) - goto failed; - - return 0; - -failed: - dev_warn(&link->dev, "failed to initialize\n"); - serial_remove(link); - return -ENODEV; -} - -static struct pcmcia_device_id serial_ids[] = { - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), - PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), - PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), - PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), - PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), - PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), - PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), - PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), - PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), - PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), - PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), - PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), - PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), - PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), - PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), - PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), - PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), - PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), - PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), - PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), - PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), - PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), - PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), - PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), - PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), - PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), - PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */ - PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */ - PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */ - PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), - PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */ - PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), - PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), - PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), - PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), - PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), - PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */ - PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */ - PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */ - PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), - PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), - PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), - PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), - PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), - PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */ - PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */ - PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), - PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), - PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), - PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), - PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), - PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), - PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), - PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), - PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), - PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), - PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), - PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), - PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), - PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b), - PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), - PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), - PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447), - PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), - PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), - PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), - PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), - PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), - PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41), - PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), - PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), - PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d), - PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38), - PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), - PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), - PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), - PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), - PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"), - PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"), - PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), - PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ - PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */ - PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ - PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), - PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"), - PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"), - PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3), - PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676), - PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767), - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), - PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc), - PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), - PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), - PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), - PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), - PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), - PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), - PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b), - /* too generic */ - /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ - /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ - PCMCIA_DEVICE_FUNC_ID(2), - PCMCIA_DEVICE_NULL, -}; -MODULE_DEVICE_TABLE(pcmcia, serial_ids); - -MODULE_FIRMWARE("cis/PCMLM28.cis"); -MODULE_FIRMWARE("cis/DP83903.cis"); -MODULE_FIRMWARE("cis/3CCFEM556.cis"); -MODULE_FIRMWARE("cis/3CXEM556.cis"); -MODULE_FIRMWARE("cis/SW_8xx_SER.cis"); -MODULE_FIRMWARE("cis/SW_7xx_SER.cis"); -MODULE_FIRMWARE("cis/SW_555_SER.cis"); -MODULE_FIRMWARE("cis/MT5634ZLX.cis"); -MODULE_FIRMWARE("cis/COMpad2.cis"); -MODULE_FIRMWARE("cis/COMpad4.cis"); -MODULE_FIRMWARE("cis/RS-COM-2P.cis"); - -static struct pcmcia_driver serial_cs_driver = { - .owner = THIS_MODULE, - .name = "serial_cs", - .probe = serial_probe, - .remove = serial_detach, - .id_table = serial_ids, - .suspend = serial_suspend, - .resume = serial_resume, -}; - -static int __init init_serial_cs(void) -{ - return pcmcia_register_driver(&serial_cs_driver); -} - -static void __exit exit_serial_cs(void) -{ - pcmcia_unregister_driver(&serial_cs_driver); -} - -module_init(init_serial_cs); -module_exit(exit_serial_cs); - -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c deleted file mode 100644 index b1962025b1aa..000000000000 --- a/drivers/serial/serial_ks8695.c +++ /dev/null @@ -1,705 +0,0 @@ -/* - * drivers/serial/serial_ks8695.c - * - * Driver for KS8695 serial ports - * - * Based on drivers/serial/serial_amba.c, by Kam Lee. - * - * Copyright 2002-2005 Micrel Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - - -#define SERIAL_KS8695_MAJOR 204 -#define SERIAL_KS8695_MINOR 16 -#define SERIAL_KS8695_DEVNAME "ttyAM" - -#define SERIAL_KS8695_NR 1 - -/* - * Access macros for the KS8695 UART - */ -#define UART_GET_CHAR(p) (__raw_readl((p)->membase + KS8695_URRB) & 0xFF) -#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + KS8695_URTH) -#define UART_GET_FCR(p) __raw_readl((p)->membase + KS8695_URFC) -#define UART_PUT_FCR(p, c) __raw_writel((c), (p)->membase + KS8695_URFC) -#define UART_GET_MSR(p) __raw_readl((p)->membase + KS8695_URMS) -#define UART_GET_LSR(p) __raw_readl((p)->membase + KS8695_URLS) -#define UART_GET_LCR(p) __raw_readl((p)->membase + KS8695_URLC) -#define UART_PUT_LCR(p, c) __raw_writel((c), (p)->membase + KS8695_URLC) -#define UART_GET_MCR(p) __raw_readl((p)->membase + KS8695_URMC) -#define UART_PUT_MCR(p, c) __raw_writel((c), (p)->membase + KS8695_URMC) -#define UART_GET_BRDR(p) __raw_readl((p)->membase + KS8695_URBD) -#define UART_PUT_BRDR(p, c) __raw_writel((c), (p)->membase + KS8695_URBD) - -#define KS8695_CLR_TX_INT() __raw_writel(1 << KS8695_IRQ_UART_TX, KS8695_IRQ_VA + KS8695_INTST) - -#define UART_DUMMY_LSR_RX 0x100 -#define UART_PORT_SIZE (KS8695_USR - KS8695_URRB + 4) - -static inline int tx_enabled(struct uart_port *port) -{ - return port->unused[0] & 1; -} - -static inline int rx_enabled(struct uart_port *port) -{ - return port->unused[0] & 2; -} - -static inline int ms_enabled(struct uart_port *port) -{ - return port->unused[0] & 4; -} - -static inline void ms_enable(struct uart_port *port, int enabled) -{ - if(enabled) - port->unused[0] |= 4; - else - port->unused[0] &= ~4; -} - -static inline void rx_enable(struct uart_port *port, int enabled) -{ - if(enabled) - port->unused[0] |= 2; - else - port->unused[0] &= ~2; -} - -static inline void tx_enable(struct uart_port *port, int enabled) -{ - if(enabled) - port->unused[0] |= 1; - else - port->unused[0] &= ~1; -} - - -#ifdef SUPPORT_SYSRQ -static struct console ks8695_console; -#endif - -static void ks8695uart_stop_tx(struct uart_port *port) -{ - if (tx_enabled(port)) { - /* use disable_irq_nosync() and not disable_irq() to avoid self - * imposed deadlock by not waiting for irq handler to end, - * since this ks8695uart_stop_tx() is called from interrupt context. - */ - disable_irq_nosync(KS8695_IRQ_UART_TX); - tx_enable(port, 0); - } -} - -static void ks8695uart_start_tx(struct uart_port *port) -{ - if (!tx_enabled(port)) { - enable_irq(KS8695_IRQ_UART_TX); - tx_enable(port, 1); - } -} - -static void ks8695uart_stop_rx(struct uart_port *port) -{ - if (rx_enabled(port)) { - disable_irq(KS8695_IRQ_UART_RX); - rx_enable(port, 0); - } -} - -static void ks8695uart_enable_ms(struct uart_port *port) -{ - if (!ms_enabled(port)) { - enable_irq(KS8695_IRQ_UART_MODEM_STATUS); - ms_enable(port,1); - } -} - -static void ks8695uart_disable_ms(struct uart_port *port) -{ - if (ms_enabled(port)) { - disable_irq(KS8695_IRQ_UART_MODEM_STATUS); - ms_enable(port,0); - } -} - -static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct tty_struct *tty = port->state->port.tty; - unsigned int status, ch, lsr, flg, max_count = 256; - - status = UART_GET_LSR(port); /* clears pending LSR interrupts */ - while ((status & URLS_URDR) && max_count--) { - ch = UART_GET_CHAR(port); - flg = TTY_NORMAL; - - port->icount.rx++; - - /* - * Note that the error handling code is - * out of the main execution path - */ - lsr = UART_GET_LSR(port) | UART_DUMMY_LSR_RX; - if (unlikely(lsr & (URLS_URBI | URLS_URPE | URLS_URFE | URLS_URROE))) { - if (lsr & URLS_URBI) { - lsr &= ~(URLS_URFE | URLS_URPE); - port->icount.brk++; - if (uart_handle_break(port)) - goto ignore_char; - } - if (lsr & URLS_URPE) - port->icount.parity++; - if (lsr & URLS_URFE) - port->icount.frame++; - if (lsr & URLS_URROE) - port->icount.overrun++; - - lsr &= port->read_status_mask; - - if (lsr & URLS_URBI) - flg = TTY_BREAK; - else if (lsr & URLS_URPE) - flg = TTY_PARITY; - else if (lsr & URLS_URFE) - flg = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, ch)) - goto ignore_char; - - uart_insert_char(port, lsr, URLS_URROE, ch, flg); - -ignore_char: - status = UART_GET_LSR(port); - } - tty_flip_buffer_push(tty); - - return IRQ_HANDLED; -} - - -static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct circ_buf *xmit = &port->state->xmit; - unsigned int count; - - if (port->x_char) { - KS8695_CLR_TX_INT(); - UART_PUT_CHAR(port, port->x_char); - port->icount.tx++; - port->x_char = 0; - return IRQ_HANDLED; - } - - if (uart_tx_stopped(port) || uart_circ_empty(xmit)) { - ks8695uart_stop_tx(port); - return IRQ_HANDLED; - } - - count = 16; /* fifo size */ - while (!uart_circ_empty(xmit) && (count-- > 0)) { - KS8695_CLR_TX_INT(); - UART_PUT_CHAR(port, xmit->buf[xmit->tail]); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - ks8695uart_stop_tx(port); - - return IRQ_HANDLED; -} - -static irqreturn_t ks8695uart_modem_status(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - unsigned int status; - - /* - * clear modem interrupt by reading MSR - */ - status = UART_GET_MSR(port); - - if (status & URMS_URDDCD) - uart_handle_dcd_change(port, status & URMS_URDDCD); - - if (status & URMS_URDDST) - port->icount.dsr++; - - if (status & URMS_URDCTS) - uart_handle_cts_change(port, status & URMS_URDCTS); - - if (status & URMS_URTERI) - port->icount.rng++; - - wake_up_interruptible(&port->state->port.delta_msr_wait); - - return IRQ_HANDLED; -} - -static unsigned int ks8695uart_tx_empty(struct uart_port *port) -{ - return (UART_GET_LSR(port) & URLS_URTE) ? TIOCSER_TEMT : 0; -} - -static unsigned int ks8695uart_get_mctrl(struct uart_port *port) -{ - unsigned int result = 0; - unsigned int status; - - status = UART_GET_MSR(port); - if (status & URMS_URDCD) - result |= TIOCM_CAR; - if (status & URMS_URDSR) - result |= TIOCM_DSR; - if (status & URMS_URCTS) - result |= TIOCM_CTS; - if (status & URMS_URRI) - result |= TIOCM_RI; - - return result; -} - -static void ks8695uart_set_mctrl(struct uart_port *port, u_int mctrl) -{ - unsigned int mcr; - - mcr = UART_GET_MCR(port); - if (mctrl & TIOCM_RTS) - mcr |= URMC_URRTS; - else - mcr &= ~URMC_URRTS; - - if (mctrl & TIOCM_DTR) - mcr |= URMC_URDTR; - else - mcr &= ~URMC_URDTR; - - UART_PUT_MCR(port, mcr); -} - -static void ks8695uart_break_ctl(struct uart_port *port, int break_state) -{ - unsigned int lcr; - - lcr = UART_GET_LCR(port); - - if (break_state == -1) - lcr |= URLC_URSBC; - else - lcr &= ~URLC_URSBC; - - UART_PUT_LCR(port, lcr); -} - -static int ks8695uart_startup(struct uart_port *port) -{ - int retval; - - set_irq_flags(KS8695_IRQ_UART_TX, IRQF_VALID | IRQF_NOAUTOEN); - tx_enable(port, 0); - rx_enable(port, 1); - ms_enable(port, 1); - - /* - * Allocate the IRQ - */ - retval = request_irq(KS8695_IRQ_UART_TX, ks8695uart_tx_chars, IRQF_DISABLED, "UART TX", port); - if (retval) - goto err_tx; - - retval = request_irq(KS8695_IRQ_UART_RX, ks8695uart_rx_chars, IRQF_DISABLED, "UART RX", port); - if (retval) - goto err_rx; - - retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, IRQF_DISABLED, "UART LineStatus", port); - if (retval) - goto err_ls; - - retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, IRQF_DISABLED, "UART ModemStatus", port); - if (retval) - goto err_ms; - - return 0; - -err_ms: - free_irq(KS8695_IRQ_UART_LINE_STATUS, port); -err_ls: - free_irq(KS8695_IRQ_UART_RX, port); -err_rx: - free_irq(KS8695_IRQ_UART_TX, port); -err_tx: - return retval; -} - -static void ks8695uart_shutdown(struct uart_port *port) -{ - /* - * Free the interrupt - */ - free_irq(KS8695_IRQ_UART_RX, port); - free_irq(KS8695_IRQ_UART_TX, port); - free_irq(KS8695_IRQ_UART_MODEM_STATUS, port); - free_irq(KS8695_IRQ_UART_LINE_STATUS, port); - - /* disable break condition and fifos */ - UART_PUT_LCR(port, UART_GET_LCR(port) & ~URLC_URSBC); - UART_PUT_FCR(port, UART_GET_FCR(port) & ~URFC_URFE); -} - -static void ks8695uart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) -{ - unsigned int lcr, fcr = 0; - unsigned long flags; - unsigned int baud, quot; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - switch (termios->c_cflag & CSIZE) { - case CS5: - lcr = URCL_5; - break; - case CS6: - lcr = URCL_6; - break; - case CS7: - lcr = URCL_7; - break; - default: - lcr = URCL_8; - break; - } - - /* stop bits */ - if (termios->c_cflag & CSTOPB) - lcr |= URLC_URSB; - - /* parity */ - if (termios->c_cflag & PARENB) { - if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */ - if (termios->c_cflag & PARODD) - lcr |= URPE_MARK; - else - lcr |= URPE_SPACE; - } - else if (termios->c_cflag & PARODD) - lcr |= URPE_ODD; - else - lcr |= URPE_EVEN; - } - - if (port->fifosize > 1) - fcr = URFC_URFRT_8 | URFC_URTFR | URFC_URRFR | URFC_URFE; - - spin_lock_irqsave(&port->lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - port->read_status_mask = URLS_URROE; - if (termios->c_iflag & INPCK) - port->read_status_mask |= (URLS_URFE | URLS_URPE); - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= URLS_URBI; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= (URLS_URFE | URLS_URPE); - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= URLS_URBI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= URLS_URROE; - } - - /* - * Ignore all characters if CREAD is not set. - */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= UART_DUMMY_LSR_RX; - - /* first, disable everything */ - if (UART_ENABLE_MS(port, termios->c_cflag)) - ks8695uart_enable_ms(port); - else - ks8695uart_disable_ms(port); - - /* Set baud rate */ - UART_PUT_BRDR(port, quot); - - UART_PUT_LCR(port, lcr); - UART_PUT_FCR(port, fcr); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *ks8695uart_type(struct uart_port *port) -{ - return port->type == PORT_KS8695 ? "KS8695" : NULL; -} - -/* - * Release the memory region(s) being used by 'port' - */ -static void ks8695uart_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, UART_PORT_SIZE); -} - -/* - * Request the memory region(s) being used by 'port' - */ -static int ks8695uart_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, UART_PORT_SIZE, - "serial_ks8695") != NULL ? 0 : -EBUSY; -} - -/* - * Configure/autoconfigure the port. - */ -static void ks8695uart_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_KS8695; - ks8695uart_request_port(port); - } -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int ks8695uart_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_KS8695) - ret = -EINVAL; - if (ser->irq != port->irq) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -static struct uart_ops ks8695uart_pops = { - .tx_empty = ks8695uart_tx_empty, - .set_mctrl = ks8695uart_set_mctrl, - .get_mctrl = ks8695uart_get_mctrl, - .stop_tx = ks8695uart_stop_tx, - .start_tx = ks8695uart_start_tx, - .stop_rx = ks8695uart_stop_rx, - .enable_ms = ks8695uart_enable_ms, - .break_ctl = ks8695uart_break_ctl, - .startup = ks8695uart_startup, - .shutdown = ks8695uart_shutdown, - .set_termios = ks8695uart_set_termios, - .type = ks8695uart_type, - .release_port = ks8695uart_release_port, - .request_port = ks8695uart_request_port, - .config_port = ks8695uart_config_port, - .verify_port = ks8695uart_verify_port, -}; - -static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = { - { - .membase = (void *) KS8695_UART_VA, - .mapbase = KS8695_UART_VA, - .iotype = SERIAL_IO_MEM, - .irq = KS8695_IRQ_UART_TX, - .uartclk = KS8695_CLOCK_RATE * 16, - .fifosize = 16, - .ops = &ks8695uart_pops, - .flags = ASYNC_BOOT_AUTOCONF, - .line = 0, - } -}; - -#ifdef CONFIG_SERIAL_KS8695_CONSOLE -static void ks8695_console_putchar(struct uart_port *port, int ch) -{ - while (!(UART_GET_LSR(port) & URLS_URTHRE)) - barrier(); - - UART_PUT_CHAR(port, ch); -} - -static void ks8695_console_write(struct console *co, const char *s, u_int count) -{ - struct uart_port *port = ks8695uart_ports + co->index; - - uart_console_write(port, s, count, ks8695_console_putchar); -} - -static void __init ks8695_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits) -{ - unsigned int lcr; - - lcr = UART_GET_LCR(port); - - switch (lcr & URLC_PARITY) { - case URPE_ODD: - *parity = 'o'; - break; - case URPE_EVEN: - *parity = 'e'; - break; - default: - *parity = 'n'; - } - - switch (lcr & URLC_URCL) { - case URCL_5: - *bits = 5; - break; - case URCL_6: - *bits = 6; - break; - case URCL_7: - *bits = 7; - break; - default: - *bits = 8; - } - - *baud = port->uartclk / (UART_GET_BRDR(port) & 0x0FFF); - *baud /= 16; - *baud &= 0xFFFFFFF0; -} - -static int __init ks8695_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - port = uart_get_console(ks8695uart_ports, SERIAL_KS8695_NR, co); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - ks8695_console_get_options(port, &baud, &parity, &bits); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver ks8695_reg; - -static struct console ks8695_console = { - .name = SERIAL_KS8695_DEVNAME, - .write = ks8695_console_write, - .device = uart_console_device, - .setup = ks8695_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &ks8695_reg, -}; - -static int __init ks8695_console_init(void) -{ - add_preferred_console(SERIAL_KS8695_DEVNAME, 0, NULL); - register_console(&ks8695_console); - return 0; -} - -console_initcall(ks8695_console_init); - -#define KS8695_CONSOLE &ks8695_console -#else -#define KS8695_CONSOLE NULL -#endif - -static struct uart_driver ks8695_reg = { - .owner = THIS_MODULE, - .driver_name = "serial_ks8695", - .dev_name = SERIAL_KS8695_DEVNAME, - .major = SERIAL_KS8695_MAJOR, - .minor = SERIAL_KS8695_MINOR, - .nr = SERIAL_KS8695_NR, - .cons = KS8695_CONSOLE, -}; - -static int __init ks8695uart_init(void) -{ - int i, ret; - - printk(KERN_INFO "Serial: Micrel KS8695 UART driver\n"); - - ret = uart_register_driver(&ks8695_reg); - if (ret) - return ret; - - for (i = 0; i < SERIAL_KS8695_NR; i++) - uart_add_one_port(&ks8695_reg, &ks8695uart_ports[0]); - - return 0; -} - -static void __exit ks8695uart_exit(void) -{ - int i; - - for (i = 0; i < SERIAL_KS8695_NR; i++) - uart_remove_one_port(&ks8695_reg, &ks8695uart_ports[0]); - uart_unregister_driver(&ks8695_reg); -} - -module_init(ks8695uart_init); -module_exit(ks8695uart_exit); - -MODULE_DESCRIPTION("KS8695 serial port driver"); -MODULE_AUTHOR("Micrel Inc."); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c deleted file mode 100644 index ea744707c4d6..000000000000 --- a/drivers/serial/serial_lh7a40x.c +++ /dev/null @@ -1,682 +0,0 @@ -/* drivers/serial/serial_lh7a40x.c - * - * Copyright (C) 2004 Coastal Environmental Systems - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - */ - -/* Driver for Sharp LH7A40X embedded serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * Based on drivers/serial/amba.c, by Deep Blue Solutions Ltd. - * - * --- - * - * This driver supports the embedded UARTs of the Sharp LH7A40X series - * CPUs. While similar to the 16550 and other UART chips, there is - * nothing close to register compatibility. Moreover, some of the - * modem control lines are not available, either in the chip or they - * are lacking in the board-level implementation. - * - * - Use of SIRDIS - * For simplicity, we disable the IR functions of any UART whenever - * we enable it. - * - */ - - -#if defined(CONFIG_SERIAL_LH7A40X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define DEV_MAJOR 204 -#define DEV_MINOR 16 -#define DEV_NR 3 - -#define ISR_LOOP_LIMIT 256 - -#define UR(p,o) _UR ((p)->membase, o) -#define _UR(b,o) (*((volatile unsigned int*)(((unsigned char*) b) + (o)))) -#define BIT_CLR(p,o,m) UR(p,o) = UR(p,o) & (~(unsigned int)m) -#define BIT_SET(p,o,m) UR(p,o) = UR(p,o) | ( (unsigned int)m) - -#define UART_REG_SIZE 32 - -#define UART_R_DATA (0x00) -#define UART_R_FCON (0x04) -#define UART_R_BRCON (0x08) -#define UART_R_CON (0x0c) -#define UART_R_STATUS (0x10) -#define UART_R_RAWISR (0x14) -#define UART_R_INTEN (0x18) -#define UART_R_ISR (0x1c) - -#define UARTEN (0x01) /* UART enable */ -#define SIRDIS (0x02) /* Serial IR disable (UART1 only) */ - -#define RxEmpty (0x10) -#define TxEmpty (0x80) -#define TxFull (0x20) -#define nRxRdy RxEmpty -#define nTxRdy TxFull -#define TxBusy (0x08) - -#define RxBreak (0x0800) -#define RxOverrunError (0x0400) -#define RxParityError (0x0200) -#define RxFramingError (0x0100) -#define RxError (RxBreak | RxOverrunError | RxParityError | RxFramingError) - -#define DCD (0x04) -#define DSR (0x02) -#define CTS (0x01) - -#define RxInt (0x01) -#define TxInt (0x02) -#define ModemInt (0x04) -#define RxTimeoutInt (0x08) - -#define MSEOI (0x10) - -#define WLEN_8 (0x60) -#define WLEN_7 (0x40) -#define WLEN_6 (0x20) -#define WLEN_5 (0x00) -#define WLEN (0x60) /* Mask for all word-length bits */ -#define STP2 (0x08) -#define PEN (0x02) /* Parity Enable */ -#define EPS (0x04) /* Even Parity Set */ -#define FEN (0x10) /* FIFO Enable */ -#define BRK (0x01) /* Send Break */ - - -struct uart_port_lh7a40x { - struct uart_port port; - unsigned int statusPrev; /* Most recently read modem status */ -}; - -static void lh7a40xuart_stop_tx (struct uart_port* port) -{ - BIT_CLR (port, UART_R_INTEN, TxInt); -} - -static void lh7a40xuart_start_tx (struct uart_port* port) -{ - BIT_SET (port, UART_R_INTEN, TxInt); - - /* *** FIXME: do I need to check for startup of the - transmitter? The old driver did, but AMBA - doesn't . */ -} - -static void lh7a40xuart_stop_rx (struct uart_port* port) -{ - BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt); -} - -static void lh7a40xuart_enable_ms (struct uart_port* port) -{ - BIT_SET (port, UART_R_INTEN, ModemInt); -} - -static void lh7a40xuart_rx_chars (struct uart_port* port) -{ - struct tty_struct* tty = port->state->port.tty; - int cbRxMax = 256; /* (Gross) limit on receive */ - unsigned int data; /* Received data and status */ - unsigned int flag; - - while (!(UR (port, UART_R_STATUS) & nRxRdy) && --cbRxMax) { - data = UR (port, UART_R_DATA); - flag = TTY_NORMAL; - ++port->icount.rx; - - if (unlikely(data & RxError)) { - if (data & RxBreak) { - data &= ~(RxFramingError | RxParityError); - ++port->icount.brk; - if (uart_handle_break (port)) - continue; - } - else if (data & RxParityError) - ++port->icount.parity; - else if (data & RxFramingError) - ++port->icount.frame; - if (data & RxOverrunError) - ++port->icount.overrun; - - /* Mask by termios, leave Rx'd byte */ - data &= port->read_status_mask | 0xff; - - if (data & RxBreak) - flag = TTY_BREAK; - else if (data & RxParityError) - flag = TTY_PARITY; - else if (data & RxFramingError) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char (port, (unsigned char) data)) - continue; - - uart_insert_char(port, data, RxOverrunError, data, flag); - } - tty_flip_buffer_push (tty); - return; -} - -static void lh7a40xuart_tx_chars (struct uart_port* port) -{ - struct circ_buf* xmit = &port->state->xmit; - int cbTxMax = port->fifosize; - - if (port->x_char) { - UR (port, UART_R_DATA) = port->x_char; - ++port->icount.tx; - port->x_char = 0; - return; - } - if (uart_circ_empty (xmit) || uart_tx_stopped (port)) { - lh7a40xuart_stop_tx (port); - return; - } - - /* Unlike the AMBA UART, the lh7a40x UART does not guarantee - that at least half of the FIFO is empty. Instead, we check - status for every character. Using the AMBA method causes - the transmitter to drop characters. */ - - do { - UR (port, UART_R_DATA) = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - ++port->icount.tx; - if (uart_circ_empty(xmit)) - break; - } while (!(UR (port, UART_R_STATUS) & nTxRdy) - && cbTxMax--); - - if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS) - uart_write_wakeup (port); - - if (uart_circ_empty (xmit)) - lh7a40xuart_stop_tx (port); -} - -static void lh7a40xuart_modem_status (struct uart_port* port) -{ - unsigned int status = UR (port, UART_R_STATUS); - unsigned int delta - = status ^ ((struct uart_port_lh7a40x*) port)->statusPrev; - - BIT_SET (port, UART_R_RAWISR, MSEOI); /* Clear modem status intr */ - - if (!delta) /* Only happens if we missed 2 transitions */ - return; - - ((struct uart_port_lh7a40x*) port)->statusPrev = status; - - if (delta & DCD) - uart_handle_dcd_change (port, status & DCD); - - if (delta & DSR) - ++port->icount.dsr; - - if (delta & CTS) - uart_handle_cts_change (port, status & CTS); - - wake_up_interruptible (&port->state->port.delta_msr_wait); -} - -static irqreturn_t lh7a40xuart_int (int irq, void* dev_id) -{ - struct uart_port* port = dev_id; - unsigned int cLoopLimit = ISR_LOOP_LIMIT; - unsigned int isr = UR (port, UART_R_ISR); - - - do { - if (isr & (RxInt | RxTimeoutInt)) - lh7a40xuart_rx_chars(port); - if (isr & ModemInt) - lh7a40xuart_modem_status (port); - if (isr & TxInt) - lh7a40xuart_tx_chars (port); - - if (--cLoopLimit == 0) - break; - - isr = UR (port, UART_R_ISR); - } while (isr & (RxInt | TxInt | RxTimeoutInt)); - - return IRQ_HANDLED; -} - -static unsigned int lh7a40xuart_tx_empty (struct uart_port* port) -{ - return (UR (port, UART_R_STATUS) & TxEmpty) ? TIOCSER_TEMT : 0; -} - -static unsigned int lh7a40xuart_get_mctrl (struct uart_port* port) -{ - unsigned int result = 0; - unsigned int status = UR (port, UART_R_STATUS); - - if (status & DCD) - result |= TIOCM_CAR; - if (status & DSR) - result |= TIOCM_DSR; - if (status & CTS) - result |= TIOCM_CTS; - - return result; -} - -static void lh7a40xuart_set_mctrl (struct uart_port* port, unsigned int mctrl) -{ - /* None of the ports supports DTR. UART1 supports RTS through GPIO. */ - /* Note, kernel appears to be setting DTR and RTS on console. */ - - /* *** FIXME: this deserves more work. There's some work in - tracing all of the IO pins. */ -#if 0 - if( port->mapbase == UART1_PHYS) { - gpioRegs_t *gpio = (gpioRegs_t *)IO_ADDRESS(GPIO_PHYS); - - if (mctrl & TIOCM_RTS) - gpio->pbdr &= ~GPIOB_UART1_RTS; - else - gpio->pbdr |= GPIOB_UART1_RTS; - } -#endif -} - -static void lh7a40xuart_break_ctl (struct uart_port* port, int break_state) -{ - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - if (break_state == -1) - BIT_SET (port, UART_R_FCON, BRK); /* Assert break */ - else - BIT_CLR (port, UART_R_FCON, BRK); /* Deassert break */ - spin_unlock_irqrestore(&port->lock, flags); -} - -static int lh7a40xuart_startup (struct uart_port* port) -{ - int retval; - - retval = request_irq (port->irq, lh7a40xuart_int, 0, - "serial_lh7a40x", port); - if (retval) - return retval; - - /* Initial modem control-line settings */ - ((struct uart_port_lh7a40x*) port)->statusPrev - = UR (port, UART_R_STATUS); - - /* There is presently no configuration option to enable IR. - Thus, we always disable it. */ - - BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); - BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt); - - return 0; -} - -static void lh7a40xuart_shutdown (struct uart_port* port) -{ - free_irq (port->irq, port); - BIT_CLR (port, UART_R_FCON, BRK | FEN); - BIT_CLR (port, UART_R_CON, UARTEN); -} - -static void lh7a40xuart_set_termios (struct uart_port* port, - struct ktermios* termios, - struct ktermios* old) -{ - unsigned int con; - unsigned int inten; - unsigned int fcon; - unsigned long flags; - unsigned int baud; - unsigned int quot; - - baud = uart_get_baud_rate (port, termios, old, 8, port->uartclk/16); - quot = uart_get_divisor (port, baud); /* -1 performed elsewhere */ - - switch (termios->c_cflag & CSIZE) { - case CS5: - fcon = WLEN_5; - break; - case CS6: - fcon = WLEN_6; - break; - case CS7: - fcon = WLEN_7; - break; - case CS8: - default: - fcon = WLEN_8; - break; - } - if (termios->c_cflag & CSTOPB) - fcon |= STP2; - if (termios->c_cflag & PARENB) { - fcon |= PEN; - if (!(termios->c_cflag & PARODD)) - fcon |= EPS; - } - if (port->fifosize > 1) - fcon |= FEN; - - spin_lock_irqsave (&port->lock, flags); - - uart_update_timeout (port, termios->c_cflag, baud); - - port->read_status_mask = RxOverrunError; - if (termios->c_iflag & INPCK) - port->read_status_mask |= RxFramingError | RxParityError; - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= RxBreak; - - /* Figure mask for status we ignore */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= RxFramingError | RxParityError; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= RxBreak; - /* Ignore overrun when ignorning parity */ - /* *** FIXME: is this in the right place? */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= RxOverrunError; - } - - /* Ignore all receive errors when receive disabled */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= RxError; - - con = UR (port, UART_R_CON); - inten = (UR (port, UART_R_INTEN) & ~ModemInt); - - if (UART_ENABLE_MS (port, termios->c_cflag)) - inten |= ModemInt; - - BIT_CLR (port, UART_R_CON, UARTEN); /* Disable UART */ - UR (port, UART_R_INTEN) = 0; /* Disable interrupts */ - UR (port, UART_R_BRCON) = quot - 1; /* Set baud rate divisor */ - UR (port, UART_R_FCON) = fcon; /* Set FIFO and frame ctrl */ - UR (port, UART_R_INTEN) = inten; /* Enable interrupts */ - UR (port, UART_R_CON) = con; /* Restore UART mode */ - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char* lh7a40xuart_type (struct uart_port* port) -{ - return port->type == PORT_LH7A40X ? "LH7A40X" : NULL; -} - -static void lh7a40xuart_release_port (struct uart_port* port) -{ - release_mem_region (port->mapbase, UART_REG_SIZE); -} - -static int lh7a40xuart_request_port (struct uart_port* port) -{ - return request_mem_region (port->mapbase, UART_REG_SIZE, - "serial_lh7a40x") != NULL - ? 0 : -EBUSY; -} - -static void lh7a40xuart_config_port (struct uart_port* port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_LH7A40X; - lh7a40xuart_request_port (port); - } -} - -static int lh7a40xuart_verify_port (struct uart_port* port, - struct serial_struct* ser) -{ - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_LH7A40X) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= nr_irqs) - ret = -EINVAL; - if (ser->baud_base < 9600) /* *** FIXME: is this true? */ - ret = -EINVAL; - return ret; -} - -static struct uart_ops lh7a40x_uart_ops = { - .tx_empty = lh7a40xuart_tx_empty, - .set_mctrl = lh7a40xuart_set_mctrl, - .get_mctrl = lh7a40xuart_get_mctrl, - .stop_tx = lh7a40xuart_stop_tx, - .start_tx = lh7a40xuart_start_tx, - .stop_rx = lh7a40xuart_stop_rx, - .enable_ms = lh7a40xuart_enable_ms, - .break_ctl = lh7a40xuart_break_ctl, - .startup = lh7a40xuart_startup, - .shutdown = lh7a40xuart_shutdown, - .set_termios = lh7a40xuart_set_termios, - .type = lh7a40xuart_type, - .release_port = lh7a40xuart_release_port, - .request_port = lh7a40xuart_request_port, - .config_port = lh7a40xuart_config_port, - .verify_port = lh7a40xuart_verify_port, -}; - -static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { - { - .port = { - .membase = (void*) io_p2v (UART1_PHYS), - .mapbase = UART1_PHYS, - .iotype = UPIO_MEM, - .irq = IRQ_UART1INTR, - .uartclk = 14745600/2, - .fifosize = 16, - .ops = &lh7a40x_uart_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 0, - }, - }, - { - .port = { - .membase = (void*) io_p2v (UART2_PHYS), - .mapbase = UART2_PHYS, - .iotype = UPIO_MEM, - .irq = IRQ_UART2INTR, - .uartclk = 14745600/2, - .fifosize = 16, - .ops = &lh7a40x_uart_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 1, - }, - }, - { - .port = { - .membase = (void*) io_p2v (UART3_PHYS), - .mapbase = UART3_PHYS, - .iotype = UPIO_MEM, - .irq = IRQ_UART3INTR, - .uartclk = 14745600/2, - .fifosize = 16, - .ops = &lh7a40x_uart_ops, - .flags = UPF_BOOT_AUTOCONF, - .line = 2, - }, - }, -}; - -#ifndef CONFIG_SERIAL_LH7A40X_CONSOLE -# define LH7A40X_CONSOLE NULL -#else -# define LH7A40X_CONSOLE &lh7a40x_console - -static void lh7a40xuart_console_putchar(struct uart_port *port, int ch) -{ - while (UR(port, UART_R_STATUS) & nTxRdy) - ; - UR(port, UART_R_DATA) = ch; -} - -static void lh7a40xuart_console_write (struct console* co, - const char* s, - unsigned int count) -{ - struct uart_port* port = &lh7a40x_ports[co->index].port; - unsigned int con = UR (port, UART_R_CON); - unsigned int inten = UR (port, UART_R_INTEN); - - - UR (port, UART_R_INTEN) = 0; /* Disable all interrupts */ - BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); /* Enable UART */ - - uart_console_write(port, s, count, lh7a40xuart_console_putchar); - - /* Wait until all characters are sent */ - while (UR (port, UART_R_STATUS) & TxBusy) - ; - - /* Restore control and interrupt mask */ - UR (port, UART_R_CON) = con; - UR (port, UART_R_INTEN) = inten; -} - -static void __init lh7a40xuart_console_get_options (struct uart_port* port, - int* baud, - int* parity, - int* bits) -{ - if (UR (port, UART_R_CON) & UARTEN) { - unsigned int fcon = UR (port, UART_R_FCON); - unsigned int quot = UR (port, UART_R_BRCON) + 1; - - switch (fcon & (PEN | EPS)) { - default: *parity = 'n'; break; - case PEN: *parity = 'o'; break; - case PEN | EPS: *parity = 'e'; break; - } - - switch (fcon & WLEN) { - default: - case WLEN_8: *bits = 8; break; - case WLEN_7: *bits = 7; break; - case WLEN_6: *bits = 6; break; - case WLEN_5: *bits = 5; break; - } - - *baud = port->uartclk/(16*quot); - } -} - -static int __init lh7a40xuart_console_setup (struct console* co, char* options) -{ - struct uart_port* port; - int baud = 38400; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index >= DEV_NR) /* Bounds check on device number */ - co->index = 0; - port = &lh7a40x_ports[co->index].port; - - if (options) - uart_parse_options (options, &baud, &parity, &bits, &flow); - else - lh7a40xuart_console_get_options (port, &baud, &parity, &bits); - - return uart_set_options (port, co, baud, parity, bits, flow); -} - -static struct uart_driver lh7a40x_reg; -static struct console lh7a40x_console = { - .name = "ttyAM", - .write = lh7a40xuart_console_write, - .device = uart_console_device, - .setup = lh7a40xuart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &lh7a40x_reg, -}; - -static int __init lh7a40xuart_console_init(void) -{ - register_console (&lh7a40x_console); - return 0; -} - -console_initcall (lh7a40xuart_console_init); - -#endif - -static struct uart_driver lh7a40x_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyAM", - .dev_name = "ttyAM", - .major = DEV_MAJOR, - .minor = DEV_MINOR, - .nr = DEV_NR, - .cons = LH7A40X_CONSOLE, -}; - -static int __init lh7a40xuart_init(void) -{ - int ret; - - printk (KERN_INFO "serial: LH7A40X serial driver\n"); - - ret = uart_register_driver (&lh7a40x_reg); - - if (ret == 0) { - int i; - - for (i = 0; i < DEV_NR; i++) { - /* UART3, when used, requires GPIO pin reallocation */ - if (lh7a40x_ports[i].port.mapbase == UART3_PHYS) - GPIO_PINMUX |= 1<<3; - uart_add_one_port (&lh7a40x_reg, - &lh7a40x_ports[i].port); - } - } - return ret; -} - -static void __exit lh7a40xuart_exit(void) -{ - int i; - - for (i = 0; i < DEV_NR; i++) - uart_remove_one_port (&lh7a40x_reg, &lh7a40x_ports[i].port); - - uart_unregister_driver (&lh7a40x_reg); -} - -module_init (lh7a40xuart_init); -module_exit (lh7a40xuart_exit); - -MODULE_AUTHOR ("Marc Singer"); -MODULE_DESCRIPTION ("Sharp LH7A40X serial port driver"); -MODULE_LICENSE ("GPL"); diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c deleted file mode 100644 index c50e9fbbf743..000000000000 --- a/drivers/serial/serial_txx9.c +++ /dev/null @@ -1,1344 +0,0 @@ -/* - * drivers/serial/serial_txx9.c - * - * Derived from many drivers using generic_serial interface, - * especially serial_tx3912.c by Steven J. Hill and r39xx_serial.c - * (was in Linux/VR tree) by Jim Pick. - * - * Copyright (C) 1999 Harald Koerfgen - * Copyright (C) 2000 Jim Pick - * Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com) - * Copyright (C) 2000-2002 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller - */ - -#if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -static char *serial_version = "1.11"; -static char *serial_name = "TX39/49 Serial driver"; - -#define PASS_LIMIT 256 - -#if !defined(CONFIG_SERIAL_TXX9_STDSERIAL) -/* "ttyS" is used for standard serial driver */ -#define TXX9_TTY_NAME "ttyTX" -#define TXX9_TTY_MINOR_START 196 -#define TXX9_TTY_MAJOR 204 -#else -/* acts like standard serial driver */ -#define TXX9_TTY_NAME "ttyS" -#define TXX9_TTY_MINOR_START 64 -#define TXX9_TTY_MAJOR TTY_MAJOR -#endif - -/* flag aliases */ -#define UPF_TXX9_HAVE_CTS_LINE UPF_BUGGY_UART -#define UPF_TXX9_USE_SCLK UPF_MAGIC_MULTIPLIER - -#ifdef CONFIG_PCI -/* support for Toshiba TC86C001 SIO */ -#define ENABLE_SERIAL_TXX9_PCI -#endif - -/* - * Number of serial ports - */ -#define UART_NR CONFIG_SERIAL_TXX9_NR_UARTS - -struct uart_txx9_port { - struct uart_port port; - /* No additional info for now */ -}; - -#define TXX9_REGION_SIZE 0x24 - -/* TXX9 Serial Registers */ -#define TXX9_SILCR 0x00 -#define TXX9_SIDICR 0x04 -#define TXX9_SIDISR 0x08 -#define TXX9_SICISR 0x0c -#define TXX9_SIFCR 0x10 -#define TXX9_SIFLCR 0x14 -#define TXX9_SIBGR 0x18 -#define TXX9_SITFIFO 0x1c -#define TXX9_SIRFIFO 0x20 - -/* SILCR : Line Control */ -#define TXX9_SILCR_SCS_MASK 0x00000060 -#define TXX9_SILCR_SCS_IMCLK 0x00000000 -#define TXX9_SILCR_SCS_IMCLK_BG 0x00000020 -#define TXX9_SILCR_SCS_SCLK 0x00000040 -#define TXX9_SILCR_SCS_SCLK_BG 0x00000060 -#define TXX9_SILCR_UEPS 0x00000010 -#define TXX9_SILCR_UPEN 0x00000008 -#define TXX9_SILCR_USBL_MASK 0x00000004 -#define TXX9_SILCR_USBL_1BIT 0x00000000 -#define TXX9_SILCR_USBL_2BIT 0x00000004 -#define TXX9_SILCR_UMODE_MASK 0x00000003 -#define TXX9_SILCR_UMODE_8BIT 0x00000000 -#define TXX9_SILCR_UMODE_7BIT 0x00000001 - -/* SIDICR : DMA/Int. Control */ -#define TXX9_SIDICR_TDE 0x00008000 -#define TXX9_SIDICR_RDE 0x00004000 -#define TXX9_SIDICR_TIE 0x00002000 -#define TXX9_SIDICR_RIE 0x00001000 -#define TXX9_SIDICR_SPIE 0x00000800 -#define TXX9_SIDICR_CTSAC 0x00000600 -#define TXX9_SIDICR_STIE_MASK 0x0000003f -#define TXX9_SIDICR_STIE_OERS 0x00000020 -#define TXX9_SIDICR_STIE_CTSS 0x00000010 -#define TXX9_SIDICR_STIE_RBRKD 0x00000008 -#define TXX9_SIDICR_STIE_TRDY 0x00000004 -#define TXX9_SIDICR_STIE_TXALS 0x00000002 -#define TXX9_SIDICR_STIE_UBRKD 0x00000001 - -/* SIDISR : DMA/Int. Status */ -#define TXX9_SIDISR_UBRK 0x00008000 -#define TXX9_SIDISR_UVALID 0x00004000 -#define TXX9_SIDISR_UFER 0x00002000 -#define TXX9_SIDISR_UPER 0x00001000 -#define TXX9_SIDISR_UOER 0x00000800 -#define TXX9_SIDISR_ERI 0x00000400 -#define TXX9_SIDISR_TOUT 0x00000200 -#define TXX9_SIDISR_TDIS 0x00000100 -#define TXX9_SIDISR_RDIS 0x00000080 -#define TXX9_SIDISR_STIS 0x00000040 -#define TXX9_SIDISR_RFDN_MASK 0x0000001f - -/* SICISR : Change Int. Status */ -#define TXX9_SICISR_OERS 0x00000020 -#define TXX9_SICISR_CTSS 0x00000010 -#define TXX9_SICISR_RBRKD 0x00000008 -#define TXX9_SICISR_TRDY 0x00000004 -#define TXX9_SICISR_TXALS 0x00000002 -#define TXX9_SICISR_UBRKD 0x00000001 - -/* SIFCR : FIFO Control */ -#define TXX9_SIFCR_SWRST 0x00008000 -#define TXX9_SIFCR_RDIL_MASK 0x00000180 -#define TXX9_SIFCR_RDIL_1 0x00000000 -#define TXX9_SIFCR_RDIL_4 0x00000080 -#define TXX9_SIFCR_RDIL_8 0x00000100 -#define TXX9_SIFCR_RDIL_12 0x00000180 -#define TXX9_SIFCR_RDIL_MAX 0x00000180 -#define TXX9_SIFCR_TDIL_MASK 0x00000018 -#define TXX9_SIFCR_TDIL_MASK 0x00000018 -#define TXX9_SIFCR_TDIL_1 0x00000000 -#define TXX9_SIFCR_TDIL_4 0x00000001 -#define TXX9_SIFCR_TDIL_8 0x00000010 -#define TXX9_SIFCR_TDIL_MAX 0x00000010 -#define TXX9_SIFCR_TFRST 0x00000004 -#define TXX9_SIFCR_RFRST 0x00000002 -#define TXX9_SIFCR_FRSTE 0x00000001 -#define TXX9_SIO_TX_FIFO 8 -#define TXX9_SIO_RX_FIFO 16 - -/* SIFLCR : Flow Control */ -#define TXX9_SIFLCR_RCS 0x00001000 -#define TXX9_SIFLCR_TES 0x00000800 -#define TXX9_SIFLCR_RTSSC 0x00000200 -#define TXX9_SIFLCR_RSDE 0x00000100 -#define TXX9_SIFLCR_TSDE 0x00000080 -#define TXX9_SIFLCR_RTSTL_MASK 0x0000001e -#define TXX9_SIFLCR_RTSTL_MAX 0x0000001e -#define TXX9_SIFLCR_TBRK 0x00000001 - -/* SIBGR : Baudrate Control */ -#define TXX9_SIBGR_BCLK_MASK 0x00000300 -#define TXX9_SIBGR_BCLK_T0 0x00000000 -#define TXX9_SIBGR_BCLK_T2 0x00000100 -#define TXX9_SIBGR_BCLK_T4 0x00000200 -#define TXX9_SIBGR_BCLK_T6 0x00000300 -#define TXX9_SIBGR_BRD_MASK 0x000000ff - -static inline unsigned int sio_in(struct uart_txx9_port *up, int offset) -{ - switch (up->port.iotype) { - default: - return __raw_readl(up->port.membase + offset); - case UPIO_PORT: - return inl(up->port.iobase + offset); - } -} - -static inline void -sio_out(struct uart_txx9_port *up, int offset, int value) -{ - switch (up->port.iotype) { - default: - __raw_writel(value, up->port.membase + offset); - break; - case UPIO_PORT: - outl(value, up->port.iobase + offset); - break; - } -} - -static inline void -sio_mask(struct uart_txx9_port *up, int offset, unsigned int value) -{ - sio_out(up, offset, sio_in(up, offset) & ~value); -} -static inline void -sio_set(struct uart_txx9_port *up, int offset, unsigned int value) -{ - sio_out(up, offset, sio_in(up, offset) | value); -} - -static inline void -sio_quot_set(struct uart_txx9_port *up, int quot) -{ - quot >>= 1; - if (quot < 256) - sio_out(up, TXX9_SIBGR, quot | TXX9_SIBGR_BCLK_T0); - else if (quot < (256 << 2)) - sio_out(up, TXX9_SIBGR, (quot >> 2) | TXX9_SIBGR_BCLK_T2); - else if (quot < (256 << 4)) - sio_out(up, TXX9_SIBGR, (quot >> 4) | TXX9_SIBGR_BCLK_T4); - else if (quot < (256 << 6)) - sio_out(up, TXX9_SIBGR, (quot >> 6) | TXX9_SIBGR_BCLK_T6); - else - sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6); -} - -static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port) -{ - return container_of(port, struct uart_txx9_port, port); -} - -static void serial_txx9_stop_tx(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE); -} - -static void serial_txx9_start_tx(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE); -} - -static void serial_txx9_stop_rx(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - up->port.read_status_mask &= ~TXX9_SIDISR_RDIS; -} - -static void serial_txx9_enable_ms(struct uart_port *port) -{ - /* TXX9-SIO can not control DTR... */ -} - -static void serial_txx9_initialize(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned int tmout = 10000; - - sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST); - /* TX4925 BUG WORKAROUND. Accessing SIOC register - * immediately after soft reset causes bus error. */ - mmiowb(); - udelay(1); - while ((sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST) && --tmout) - udelay(1); - /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ - sio_set(up, TXX9_SIFCR, - TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1); - /* initial settings */ - sio_out(up, TXX9_SILCR, - TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT | - ((up->port.flags & UPF_TXX9_USE_SCLK) ? - TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG)); - sio_quot_set(up, uart_get_divisor(port, 9600)); - sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */); - sio_out(up, TXX9_SIDICR, 0); -} - -static inline void -receive_chars(struct uart_txx9_port *up, unsigned int *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned char ch; - unsigned int disr = *status; - int max_count = 256; - char flag; - unsigned int next_ignore_status_mask; - - do { - ch = sio_in(up, TXX9_SIRFIFO); - flag = TTY_NORMAL; - up->port.icount.rx++; - - /* mask out RFDN_MASK bit added by previous overrun */ - next_ignore_status_mask = - up->port.ignore_status_mask & ~TXX9_SIDISR_RFDN_MASK; - if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER | - TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) { - /* - * For statistics only - */ - if (disr & TXX9_SIDISR_UBRK) { - disr &= ~(TXX9_SIDISR_UFER | TXX9_SIDISR_UPER); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (disr & TXX9_SIDISR_UPER) - up->port.icount.parity++; - else if (disr & TXX9_SIDISR_UFER) - up->port.icount.frame++; - if (disr & TXX9_SIDISR_UOER) { - up->port.icount.overrun++; - /* - * The receiver read buffer still hold - * a char which caused overrun. - * Ignore next char by adding RFDN_MASK - * to ignore_status_mask temporarily. - */ - next_ignore_status_mask |= - TXX9_SIDISR_RFDN_MASK; - } - - /* - * Mask off conditions which should be ingored. - */ - disr &= up->port.read_status_mask; - - if (disr & TXX9_SIDISR_UBRK) { - flag = TTY_BREAK; - } else if (disr & TXX9_SIDISR_UPER) - flag = TTY_PARITY; - else if (disr & TXX9_SIDISR_UFER) - flag = TTY_FRAME; - } - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - - uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag); - - ignore_char: - up->port.ignore_status_mask = next_ignore_status_mask; - disr = sio_in(up, TXX9_SIDISR); - } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0)); - spin_unlock(&up->port.lock); - tty_flip_buffer_push(tty); - spin_lock(&up->port.lock); - *status = disr; -} - -static inline void transmit_chars(struct uart_txx9_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { - sio_out(up, TXX9_SITFIFO, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - serial_txx9_stop_tx(&up->port); - return; - } - - count = TXX9_SIO_TX_FIFO; - do { - sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - if (uart_circ_empty(xmit)) - serial_txx9_stop_tx(&up->port); -} - -static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id) -{ - int pass_counter = 0; - struct uart_txx9_port *up = dev_id; - unsigned int status; - - while (1) { - spin_lock(&up->port.lock); - status = sio_in(up, TXX9_SIDISR); - if (!(sio_in(up, TXX9_SIDICR) & TXX9_SIDICR_TIE)) - status &= ~TXX9_SIDISR_TDIS; - if (!(status & (TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | - TXX9_SIDISR_TOUT))) { - spin_unlock(&up->port.lock); - break; - } - - if (status & TXX9_SIDISR_RDIS) - receive_chars(up, &status); - if (status & TXX9_SIDISR_TDIS) - transmit_chars(up); - /* Clear TX/RX Int. Status */ - sio_mask(up, TXX9_SIDISR, - TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | - TXX9_SIDISR_TOUT); - spin_unlock(&up->port.lock); - - if (pass_counter++ > PASS_LIMIT) - break; - } - - return pass_counter ? IRQ_HANDLED : IRQ_NONE; -} - -static unsigned int serial_txx9_tx_empty(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&up->port.lock, flags); - ret = (sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS) ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret; -} - -static unsigned int serial_txx9_get_mctrl(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned int ret; - - /* no modem control lines */ - ret = TIOCM_CAR | TIOCM_DSR; - ret |= (sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS; - ret |= (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS; - - return ret; -} - -static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - - if (mctrl & TIOCM_RTS) - sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); - else - sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); -} - -static void serial_txx9_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - if (break_state == -1) - sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); - else - sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL) -/* - * Wait for transmitter & holding register to empty - */ -static void wait_for_xmitr(struct uart_txx9_port *up) -{ - unsigned int tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - while (--tmout && - !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS)) - udelay(1); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout && - (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS)) - udelay(1); - } -} -#endif - -#ifdef CONFIG_CONSOLE_POLL -/* - * Console polling routines for writing and reading from the uart while - * in an interrupt or debug context. - */ - -static int serial_txx9_get_poll_char(struct uart_port *port) -{ - unsigned int ier; - unsigned char c; - struct uart_txx9_port *up = to_uart_txx9_port(port); - - /* - * First save the IER then disable the interrupts - */ - ier = sio_in(up, TXX9_SIDICR); - sio_out(up, TXX9_SIDICR, 0); - - while (sio_in(up, TXX9_SIDISR) & TXX9_SIDISR_UVALID) - ; - - c = sio_in(up, TXX9_SIRFIFO); - - /* - * Finally, clear RX interrupt status - * and restore the IER - */ - sio_mask(up, TXX9_SIDISR, TXX9_SIDISR_RDIS); - sio_out(up, TXX9_SIDICR, ier); - return c; -} - - -static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c) -{ - unsigned int ier; - struct uart_txx9_port *up = to_uart_txx9_port(port); - - /* - * First save the IER then disable the interrupts - */ - ier = sio_in(up, TXX9_SIDICR); - sio_out(up, TXX9_SIDICR, 0); - - wait_for_xmitr(up); - /* - * Send the character out. - * If a LF, also do CR... - */ - sio_out(up, TXX9_SITFIFO, c); - if (c == 10) { - wait_for_xmitr(up); - sio_out(up, TXX9_SITFIFO, 13); - } - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - sio_out(up, TXX9_SIDICR, ier); -} - -#endif /* CONFIG_CONSOLE_POLL */ - -static int serial_txx9_startup(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned long flags; - int retval; - - /* - * Clear the FIFO buffers and disable them. - * (they will be reenabled in set_termios()) - */ - sio_set(up, TXX9_SIFCR, - TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); - /* clear reset */ - sio_mask(up, TXX9_SIFCR, - TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); - sio_out(up, TXX9_SIDICR, 0); - - /* - * Clear the interrupt registers. - */ - sio_out(up, TXX9_SIDISR, 0); - - retval = request_irq(up->port.irq, serial_txx9_interrupt, - IRQF_SHARED, "serial_txx9", up); - if (retval) - return retval; - - /* - * Now, initialize the UART - */ - spin_lock_irqsave(&up->port.lock, flags); - serial_txx9_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* Enable RX/TX */ - sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); - - /* - * Finally, enable interrupts. - */ - sio_set(up, TXX9_SIDICR, TXX9_SIDICR_RIE); - - return 0; -} - -static void serial_txx9_shutdown(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned long flags; - - /* - * Disable interrupts from this port - */ - sio_out(up, TXX9_SIDICR, 0); /* disable all intrs */ - - spin_lock_irqsave(&up->port.lock, flags); - serial_txx9_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Disable break condition - */ - sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); - -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - if (up->port.cons && up->port.line == up->port.cons->index) { - free_irq(up->port.irq, up); - return; - } -#endif - /* reset FIFOs */ - sio_set(up, TXX9_SIFCR, - TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); - /* clear reset */ - sio_mask(up, TXX9_SIFCR, - TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); - - /* Disable RX/TX */ - sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); - - free_irq(up->port.irq, up); -} - -static void -serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - unsigned int cval, fcr = 0; - unsigned long flags; - unsigned int baud, quot; - - /* - * We don't support modem control lines. - */ - termios->c_cflag &= ~(HUPCL | CMSPAR); - termios->c_cflag |= CLOCAL; - - cval = sio_in(up, TXX9_SILCR); - /* byte size and parity */ - cval &= ~TXX9_SILCR_UMODE_MASK; - switch (termios->c_cflag & CSIZE) { - case CS7: - cval |= TXX9_SILCR_UMODE_7BIT; - break; - default: - case CS5: /* not supported */ - case CS6: /* not supported */ - case CS8: - cval |= TXX9_SILCR_UMODE_8BIT; - break; - } - - cval &= ~TXX9_SILCR_USBL_MASK; - if (termios->c_cflag & CSTOPB) - cval |= TXX9_SILCR_USBL_2BIT; - else - cval |= TXX9_SILCR_USBL_1BIT; - cval &= ~(TXX9_SILCR_UPEN | TXX9_SILCR_UEPS); - if (termios->c_cflag & PARENB) - cval |= TXX9_SILCR_UPEN; - if (!(termios->c_cflag & PARODD)) - cval |= TXX9_SILCR_UEPS; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16/2); - quot = uart_get_divisor(port, baud); - - /* Set up FIFOs */ - /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ - fcr = TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1; - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - up->port.read_status_mask = TXX9_SIDISR_UOER | - TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS; - if (termios->c_iflag & INPCK) - up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER; - if (termios->c_iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= TXX9_SIDISR_UBRK; - - /* - * Characteres to ignore - */ - up->port.ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER; - if (termios->c_iflag & IGNBRK) { - up->port.ignore_status_mask |= TXX9_SIDISR_UBRK; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - up->port.ignore_status_mask |= TXX9_SIDISR_UOER; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - up->port.ignore_status_mask |= TXX9_SIDISR_RDIS; - - /* CTS flow control flag */ - if ((termios->c_cflag & CRTSCTS) && - (up->port.flags & UPF_TXX9_HAVE_CTS_LINE)) { - sio_set(up, TXX9_SIFLCR, - TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); - } else { - sio_mask(up, TXX9_SIFLCR, - TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); - } - - sio_out(up, TXX9_SILCR, cval); - sio_quot_set(up, quot); - sio_out(up, TXX9_SIFCR, fcr); - - serial_txx9_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void -serial_txx9_pm(struct uart_port *port, unsigned int state, - unsigned int oldstate) -{ - /* - * If oldstate was -1 this is called from - * uart_configure_port(). In this case do not initialize the - * port now, because the port was already initialized (for - * non-console port) or should not be initialized here (for - * console port). If we initialized the port here we lose - * serial console settings. - */ - if (state == 0 && oldstate != -1) - serial_txx9_initialize(port); -} - -static int serial_txx9_request_resource(struct uart_txx9_port *up) -{ - unsigned int size = TXX9_REGION_SIZE; - int ret = 0; - - switch (up->port.iotype) { - default: - if (!up->port.mapbase) - break; - - if (!request_mem_region(up->port.mapbase, size, "serial_txx9")) { - ret = -EBUSY; - break; - } - - if (up->port.flags & UPF_IOREMAP) { - up->port.membase = ioremap(up->port.mapbase, size); - if (!up->port.membase) { - release_mem_region(up->port.mapbase, size); - ret = -ENOMEM; - } - } - break; - - case UPIO_PORT: - if (!request_region(up->port.iobase, size, "serial_txx9")) - ret = -EBUSY; - break; - } - return ret; -} - -static void serial_txx9_release_resource(struct uart_txx9_port *up) -{ - unsigned int size = TXX9_REGION_SIZE; - - switch (up->port.iotype) { - default: - if (!up->port.mapbase) - break; - - if (up->port.flags & UPF_IOREMAP) { - iounmap(up->port.membase); - up->port.membase = NULL; - } - - release_mem_region(up->port.mapbase, size); - break; - - case UPIO_PORT: - release_region(up->port.iobase, size); - break; - } -} - -static void serial_txx9_release_port(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - serial_txx9_release_resource(up); -} - -static int serial_txx9_request_port(struct uart_port *port) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - return serial_txx9_request_resource(up); -} - -static void serial_txx9_config_port(struct uart_port *port, int uflags) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - int ret; - - /* - * Find the region that we can probe for. This in turn - * tells us whether we can probe for the type of port. - */ - ret = serial_txx9_request_resource(up); - if (ret < 0) - return; - port->type = PORT_TXX9; - up->port.fifosize = TXX9_SIO_TX_FIFO; - -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - if (up->port.line == up->port.cons->index) - return; -#endif - serial_txx9_initialize(port); -} - -static const char * -serial_txx9_type(struct uart_port *port) -{ - return "txx9"; -} - -static struct uart_ops serial_txx9_pops = { - .tx_empty = serial_txx9_tx_empty, - .set_mctrl = serial_txx9_set_mctrl, - .get_mctrl = serial_txx9_get_mctrl, - .stop_tx = serial_txx9_stop_tx, - .start_tx = serial_txx9_start_tx, - .stop_rx = serial_txx9_stop_rx, - .enable_ms = serial_txx9_enable_ms, - .break_ctl = serial_txx9_break_ctl, - .startup = serial_txx9_startup, - .shutdown = serial_txx9_shutdown, - .set_termios = serial_txx9_set_termios, - .pm = serial_txx9_pm, - .type = serial_txx9_type, - .release_port = serial_txx9_release_port, - .request_port = serial_txx9_request_port, - .config_port = serial_txx9_config_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = serial_txx9_get_poll_char, - .poll_put_char = serial_txx9_put_poll_char, -#endif -}; - -static struct uart_txx9_port serial_txx9_ports[UART_NR]; - -static void __init serial_txx9_register_ports(struct uart_driver *drv, - struct device *dev) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; - - up->port.line = i; - up->port.ops = &serial_txx9_pops; - up->port.dev = dev; - if (up->port.iobase || up->port.mapbase) - uart_add_one_port(drv, &up->port); - } -} - -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - -static void serial_txx9_console_putchar(struct uart_port *port, int ch) -{ - struct uart_txx9_port *up = to_uart_txx9_port(port); - - wait_for_xmitr(up); - sio_out(up, TXX9_SITFIFO, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void -serial_txx9_console_write(struct console *co, const char *s, unsigned int count) -{ - struct uart_txx9_port *up = &serial_txx9_ports[co->index]; - unsigned int ier, flcr; - - /* - * First save the UER then disable the interrupts - */ - ier = sio_in(up, TXX9_SIDICR); - sio_out(up, TXX9_SIDICR, 0); - /* - * Disable flow-control if enabled (and unnecessary) - */ - flcr = sio_in(up, TXX9_SIFLCR); - if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES)) - sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES); - - uart_console_write(&up->port, s, count, serial_txx9_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - sio_out(up, TXX9_SIFLCR, flcr); - sio_out(up, TXX9_SIDICR, ier); -} - -static int __init serial_txx9_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - struct uart_txx9_port *up; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= UART_NR) - co->index = 0; - up = &serial_txx9_ports[co->index]; - port = &up->port; - if (!port->ops) - return -ENODEV; - - serial_txx9_initialize(&up->port); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver serial_txx9_reg; -static struct console serial_txx9_console = { - .name = TXX9_TTY_NAME, - .write = serial_txx9_console_write, - .device = uart_console_device, - .setup = serial_txx9_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &serial_txx9_reg, -}; - -static int __init serial_txx9_console_init(void) -{ - register_console(&serial_txx9_console); - return 0; -} -console_initcall(serial_txx9_console_init); - -#define SERIAL_TXX9_CONSOLE &serial_txx9_console -#else -#define SERIAL_TXX9_CONSOLE NULL -#endif - -static struct uart_driver serial_txx9_reg = { - .owner = THIS_MODULE, - .driver_name = "serial_txx9", - .dev_name = TXX9_TTY_NAME, - .major = TXX9_TTY_MAJOR, - .minor = TXX9_TTY_MINOR_START, - .nr = UART_NR, - .cons = SERIAL_TXX9_CONSOLE, -}; - -int __init early_serial_txx9_setup(struct uart_port *port) -{ - if (port->line >= ARRAY_SIZE(serial_txx9_ports)) - return -ENODEV; - - serial_txx9_ports[port->line].port = *port; - serial_txx9_ports[port->line].port.ops = &serial_txx9_pops; - serial_txx9_ports[port->line].port.flags |= - UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; - return 0; -} - -static DEFINE_MUTEX(serial_txx9_mutex); - -/** - * serial_txx9_register_port - register a serial port - * @port: serial port template - * - * Configure the serial port specified by the request. - * - * The port is then probed and if necessary the IRQ is autodetected - * If this fails an error is returned. - * - * On success the port is ready to use and the line number is returned. - */ -static int __devinit serial_txx9_register_port(struct uart_port *port) -{ - int i; - struct uart_txx9_port *uart; - int ret = -ENOSPC; - - mutex_lock(&serial_txx9_mutex); - for (i = 0; i < UART_NR; i++) { - uart = &serial_txx9_ports[i]; - if (uart_match_port(&uart->port, port)) { - uart_remove_one_port(&serial_txx9_reg, &uart->port); - break; - } - } - if (i == UART_NR) { - /* Find unused port */ - for (i = 0; i < UART_NR; i++) { - uart = &serial_txx9_ports[i]; - if (!(uart->port.iobase || uart->port.mapbase)) - break; - } - } - if (i < UART_NR) { - uart->port.iobase = port->iobase; - uart->port.membase = port->membase; - uart->port.irq = port->irq; - uart->port.uartclk = port->uartclk; - uart->port.iotype = port->iotype; - uart->port.flags = port->flags - | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; - uart->port.mapbase = port->mapbase; - if (port->dev) - uart->port.dev = port->dev; - ret = uart_add_one_port(&serial_txx9_reg, &uart->port); - if (ret == 0) - ret = uart->port.line; - } - mutex_unlock(&serial_txx9_mutex); - return ret; -} - -/** - * serial_txx9_unregister_port - remove a txx9 serial port at runtime - * @line: serial line number - * - * Remove one serial port. This may not be called from interrupt - * context. We hand the port back to the our control. - */ -static void __devexit serial_txx9_unregister_port(int line) -{ - struct uart_txx9_port *uart = &serial_txx9_ports[line]; - - mutex_lock(&serial_txx9_mutex); - uart_remove_one_port(&serial_txx9_reg, &uart->port); - uart->port.flags = 0; - uart->port.type = PORT_UNKNOWN; - uart->port.iobase = 0; - uart->port.mapbase = 0; - uart->port.membase = NULL; - uart->port.dev = NULL; - mutex_unlock(&serial_txx9_mutex); -} - -/* - * Register a set of serial devices attached to a platform device. - */ -static int __devinit serial_txx9_probe(struct platform_device *dev) -{ - struct uart_port *p = dev->dev.platform_data; - struct uart_port port; - int ret, i; - - memset(&port, 0, sizeof(struct uart_port)); - for (i = 0; p && p->uartclk != 0; p++, i++) { - port.iobase = p->iobase; - port.membase = p->membase; - port.irq = p->irq; - port.uartclk = p->uartclk; - port.iotype = p->iotype; - port.flags = p->flags; - port.mapbase = p->mapbase; - port.dev = &dev->dev; - ret = serial_txx9_register_port(&port); - if (ret < 0) { - dev_err(&dev->dev, "unable to register port at index %d " - "(IO%lx MEM%llx IRQ%d): %d\n", i, - p->iobase, (unsigned long long)p->mapbase, - p->irq, ret); - } - } - return 0; -} - -/* - * Remove serial ports registered against a platform device. - */ -static int __devexit serial_txx9_remove(struct platform_device *dev) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; - - if (up->port.dev == &dev->dev) - serial_txx9_unregister_port(i); - } - return 0; -} - -#ifdef CONFIG_PM -static int serial_txx9_suspend(struct platform_device *dev, pm_message_t state) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; - - if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) - uart_suspend_port(&serial_txx9_reg, &up->port); - } - - return 0; -} - -static int serial_txx9_resume(struct platform_device *dev) -{ - int i; - - for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; - - if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) - uart_resume_port(&serial_txx9_reg, &up->port); - } - - return 0; -} -#endif - -static struct platform_driver serial_txx9_plat_driver = { - .probe = serial_txx9_probe, - .remove = __devexit_p(serial_txx9_remove), -#ifdef CONFIG_PM - .suspend = serial_txx9_suspend, - .resume = serial_txx9_resume, -#endif - .driver = { - .name = "serial_txx9", - .owner = THIS_MODULE, - }, -}; - -#ifdef ENABLE_SERIAL_TXX9_PCI -/* - * Probe one serial board. Unfortunately, there is no rhyme nor reason - * to the arrangement of serial ports on a PCI card. - */ -static int __devinit -pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent) -{ - struct uart_port port; - int line; - int rc; - - rc = pci_enable_device(dev); - if (rc) - return rc; - - memset(&port, 0, sizeof(port)); - port.ops = &serial_txx9_pops; - port.flags |= UPF_TXX9_HAVE_CTS_LINE; - port.uartclk = 66670000; - port.irq = dev->irq; - port.iotype = UPIO_PORT; - port.iobase = pci_resource_start(dev, 1); - port.dev = &dev->dev; - line = serial_txx9_register_port(&port); - if (line < 0) { - printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line); - pci_disable_device(dev); - return line; - } - pci_set_drvdata(dev, &serial_txx9_ports[line]); - - return 0; -} - -static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev) -{ - struct uart_txx9_port *up = pci_get_drvdata(dev); - - pci_set_drvdata(dev, NULL); - - if (up) { - serial_txx9_unregister_port(up->port.line); - pci_disable_device(dev); - } -} - -#ifdef CONFIG_PM -static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state) -{ - struct uart_txx9_port *up = pci_get_drvdata(dev); - - if (up) - uart_suspend_port(&serial_txx9_reg, &up->port); - pci_save_state(dev); - pci_set_power_state(dev, pci_choose_state(dev, state)); - return 0; -} - -static int pciserial_txx9_resume_one(struct pci_dev *dev) -{ - struct uart_txx9_port *up = pci_get_drvdata(dev); - - pci_set_power_state(dev, PCI_D0); - pci_restore_state(dev); - if (up) - uart_resume_port(&serial_txx9_reg, &up->port); - return 0; -} -#endif - -static const struct pci_device_id serial_txx9_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC) }, - { 0, } -}; - -static struct pci_driver serial_txx9_pci_driver = { - .name = "serial_txx9", - .probe = pciserial_txx9_init_one, - .remove = __devexit_p(pciserial_txx9_remove_one), -#ifdef CONFIG_PM - .suspend = pciserial_txx9_suspend_one, - .resume = pciserial_txx9_resume_one, -#endif - .id_table = serial_txx9_pci_tbl, -}; - -MODULE_DEVICE_TABLE(pci, serial_txx9_pci_tbl); -#endif /* ENABLE_SERIAL_TXX9_PCI */ - -static struct platform_device *serial_txx9_plat_devs; - -static int __init serial_txx9_init(void) -{ - int ret; - - printk(KERN_INFO "%s version %s\n", serial_name, serial_version); - - ret = uart_register_driver(&serial_txx9_reg); - if (ret) - goto out; - - serial_txx9_plat_devs = platform_device_alloc("serial_txx9", -1); - if (!serial_txx9_plat_devs) { - ret = -ENOMEM; - goto unreg_uart_drv; - } - - ret = platform_device_add(serial_txx9_plat_devs); - if (ret) - goto put_dev; - - serial_txx9_register_ports(&serial_txx9_reg, - &serial_txx9_plat_devs->dev); - - ret = platform_driver_register(&serial_txx9_plat_driver); - if (ret) - goto del_dev; - -#ifdef ENABLE_SERIAL_TXX9_PCI - ret = pci_register_driver(&serial_txx9_pci_driver); -#endif - if (ret == 0) - goto out; - - del_dev: - platform_device_del(serial_txx9_plat_devs); - put_dev: - platform_device_put(serial_txx9_plat_devs); - unreg_uart_drv: - uart_unregister_driver(&serial_txx9_reg); - out: - return ret; -} - -static void __exit serial_txx9_exit(void) -{ - int i; - -#ifdef ENABLE_SERIAL_TXX9_PCI - pci_unregister_driver(&serial_txx9_pci_driver); -#endif - platform_driver_unregister(&serial_txx9_plat_driver); - platform_device_unregister(serial_txx9_plat_devs); - for (i = 0; i < UART_NR; i++) { - struct uart_txx9_port *up = &serial_txx9_ports[i]; - if (up->port.iobase || up->port.mapbase) - uart_remove_one_port(&serial_txx9_reg, &up->port); - } - - uart_unregister_driver(&serial_txx9_reg); -} - -module_init(serial_txx9_init); -module_exit(serial_txx9_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("TX39/49 serial driver"); - -MODULE_ALIAS_CHARDEV_MAJOR(TXX9_TTY_MAJOR); diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c deleted file mode 100644 index c291b3add1d2..000000000000 --- a/drivers/serial/sh-sci.c +++ /dev/null @@ -1,2027 +0,0 @@ -/* - * drivers/serial/sh-sci.c - * - * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) - * - * Copyright (C) 2002 - 2008 Paul Mundt - * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007). - * - * based off of the old drivers/char/sh-sci.c by: - * - * Copyright (C) 1999, 2000 Niibe Yutaka - * Copyright (C) 2000 Sugioka Toshinobu - * Modified to support multiple serial ports. Stuart Menefy (May 2000). - * Modified to support SecureEdge. David McCullough (2002) - * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003). - * Removed SH7300 support (Jul 2007). - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_SUPERH -#include -#endif - -#ifdef CONFIG_H8300 -#include -#endif - -#include "sh-sci.h" - -struct sci_port { - struct uart_port port; - - /* Port type */ - unsigned int type; - - /* Port IRQs: ERI, RXI, TXI, BRI (optional) */ - unsigned int irqs[SCIx_NR_IRQS]; - - /* Port enable callback */ - void (*enable)(struct uart_port *port); - - /* Port disable callback */ - void (*disable)(struct uart_port *port); - - /* Break timer */ - struct timer_list break_timer; - int break_flag; - - /* Interface clock */ - struct clk *iclk; - /* Function clock */ - struct clk *fclk; - - struct list_head node; - struct dma_chan *chan_tx; - struct dma_chan *chan_rx; -#ifdef CONFIG_SERIAL_SH_SCI_DMA - struct device *dma_dev; - unsigned int slave_tx; - unsigned int slave_rx; - struct dma_async_tx_descriptor *desc_tx; - struct dma_async_tx_descriptor *desc_rx[2]; - dma_cookie_t cookie_tx; - dma_cookie_t cookie_rx[2]; - dma_cookie_t active_rx; - struct scatterlist sg_tx; - unsigned int sg_len_tx; - struct scatterlist sg_rx[2]; - size_t buf_len_rx; - struct sh_dmae_slave param_tx; - struct sh_dmae_slave param_rx; - struct work_struct work_tx; - struct work_struct work_rx; - struct timer_list rx_timer; - unsigned int rx_timeout; -#endif -}; - -struct sh_sci_priv { - spinlock_t lock; - struct list_head ports; - struct notifier_block clk_nb; -}; - -/* Function prototypes */ -static void sci_stop_tx(struct uart_port *port); - -#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS - -static struct sci_port sci_ports[SCI_NPORTS]; -static struct uart_driver sci_uart_driver; - -static inline struct sci_port * -to_sci_port(struct uart_port *uart) -{ - return container_of(uart, struct sci_port, port); -} - -#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) - -#ifdef CONFIG_CONSOLE_POLL -static inline void handle_error(struct uart_port *port) -{ - /* Clear error flags */ - sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); -} - -static int sci_poll_get_char(struct uart_port *port) -{ - unsigned short status; - int c; - - do { - status = sci_in(port, SCxSR); - if (status & SCxSR_ERRORS(port)) { - handle_error(port); - continue; - } - break; - } while (1); - - if (!(status & SCxSR_RDxF(port))) - return NO_POLL_CHAR; - - c = sci_in(port, SCxRDR); - - /* Dummy read */ - sci_in(port, SCxSR); - sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); - - return c; -} -#endif - -static void sci_poll_put_char(struct uart_port *port, unsigned char c) -{ - unsigned short status; - - do { - status = sci_in(port, SCxSR); - } while (!(status & SCxSR_TDxE(port))); - - sci_out(port, SCxTDR, c); - sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); -} -#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ - -#if defined(__H8300H__) || defined(__H8300S__) -static void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - int ch = (port->mapbase - SMR0) >> 3; - - /* set DDR regs */ - H8300_GPIO_DDR(h8300_sci_pins[ch].port, - h8300_sci_pins[ch].rx, - H8300_GPIO_INPUT); - H8300_GPIO_DDR(h8300_sci_pins[ch].port, - h8300_sci_pins[ch].tx, - H8300_GPIO_OUTPUT); - - /* tx mark output*/ - H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - if (port->mapbase == 0xA4400000) { - __raw_writew(__raw_readw(PACR) & 0xffc0, PACR); - __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR); - } else if (port->mapbase == 0xA4410000) - __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR); -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - unsigned short data; - - if (cflag & CRTSCTS) { - /* enable RTS/CTS */ - if (port->mapbase == 0xa4430000) { /* SCIF0 */ - /* Clear PTCR bit 9-2; enable all scif pins but sck */ - data = __raw_readw(PORT_PTCR); - __raw_writew((data & 0xfc03), PORT_PTCR); - } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ - /* Clear PVCR bit 9-2 */ - data = __raw_readw(PORT_PVCR); - __raw_writew((data & 0xfc03), PORT_PVCR); - } - } else { - if (port->mapbase == 0xa4430000) { /* SCIF0 */ - /* Clear PTCR bit 5-2; enable only tx and rx */ - data = __raw_readw(PORT_PTCR); - __raw_writew((data & 0xffc3), PORT_PTCR); - } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ - /* Clear PVCR bit 5-2 */ - data = __raw_readw(PORT_PVCR); - __raw_writew((data & 0xffc3), PORT_PVCR); - } - } -} -#elif defined(CONFIG_CPU_SH3) -/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */ -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - unsigned short data; - - /* We need to set SCPCR to enable RTS/CTS */ - data = __raw_readw(SCPCR); - /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/ - __raw_writew(data & 0x0fcf, SCPCR); - - if (!(cflag & CRTSCTS)) { - /* We need to set SCPCR to enable RTS/CTS */ - data = __raw_readw(SCPCR); - /* Clear out SCP7MD1,0, SCP4MD1,0, - Set SCP6MD1,0 = {01} (output) */ - __raw_writew((data & 0x0fcf) | 0x1000, SCPCR); - - data = __raw_readb(SCPDR); - /* Set /RTS2 (bit6) = 0 */ - __raw_writeb(data & 0xbf, SCPDR); - } -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7722) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - unsigned short data; - - if (port->mapbase == 0xffe00000) { - data = __raw_readw(PSCR); - data &= ~0x03cf; - if (!(cflag & CRTSCTS)) - data |= 0x0340; - - __raw_writew(data, PSCR); - } -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) || \ - defined(CONFIG_CPU_SUBTYPE_SHX3) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - if (!(cflag & CRTSCTS)) - __raw_writew(0x0080, SCSPTR0); /* Set RTS = 1 */ -} -#elif defined(CONFIG_CPU_SH4) && !defined(CONFIG_CPU_SH4A) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - if (!(cflag & CRTSCTS)) - __raw_writew(0x0080, SCSPTR2); /* Set RTS = 1 */ -} -#else -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - /* Nothing to do */ -} -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) -static int scif_txfill(struct uart_port *port) -{ - return sci_in(port, SCTFDR) & 0xff; -} - -static int scif_txroom(struct uart_port *port) -{ - return SCIF_TXROOM_MAX - scif_txfill(port); -} - -static int scif_rxfill(struct uart_port *port) -{ - return sci_in(port, SCRFDR) & 0xff; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -static int scif_txfill(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000 || - port->mapbase == 0xffe08000) - /* SCIF0/1*/ - return sci_in(port, SCTFDR) & 0xff; - else - /* SCIF2 */ - return sci_in(port, SCFDR) >> 8; -} - -static int scif_txroom(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000 || - port->mapbase == 0xffe08000) - /* SCIF0/1*/ - return SCIF_TXROOM_MAX - scif_txfill(port); - else - /* SCIF2 */ - return SCIF2_TXROOM_MAX - scif_txfill(port); -} - -static int scif_rxfill(struct uart_port *port) -{ - if ((port->mapbase == 0xffe00000) || - (port->mapbase == 0xffe08000)) { - /* SCIF0/1*/ - return sci_in(port, SCRFDR) & 0xff; - } else { - /* SCIF2 */ - return sci_in(port, SCFDR) & SCIF2_RFDC_MASK; - } -} -#elif defined(CONFIG_ARCH_SH7372) -static int scif_txfill(struct uart_port *port) -{ - if (port->type == PORT_SCIFA) - return sci_in(port, SCFDR) >> 8; - else - return sci_in(port, SCTFDR); -} - -static int scif_txroom(struct uart_port *port) -{ - return port->fifosize - scif_txfill(port); -} - -static int scif_rxfill(struct uart_port *port) -{ - if (port->type == PORT_SCIFA) - return sci_in(port, SCFDR) & SCIF_RFDC_MASK; - else - return sci_in(port, SCRFDR); -} -#else -static int scif_txfill(struct uart_port *port) -{ - return sci_in(port, SCFDR) >> 8; -} - -static int scif_txroom(struct uart_port *port) -{ - return SCIF_TXROOM_MAX - scif_txfill(port); -} - -static int scif_rxfill(struct uart_port *port) -{ - return sci_in(port, SCFDR) & SCIF_RFDC_MASK; -} -#endif - -static int sci_txfill(struct uart_port *port) -{ - return !(sci_in(port, SCxSR) & SCI_TDRE); -} - -static int sci_txroom(struct uart_port *port) -{ - return !sci_txfill(port); -} - -static int sci_rxfill(struct uart_port *port) -{ - return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; -} - -/* ********************************************************************** * - * the interrupt related routines * - * ********************************************************************** */ - -static void sci_transmit_chars(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - unsigned int stopped = uart_tx_stopped(port); - unsigned short status; - unsigned short ctrl; - int count; - - status = sci_in(port, SCxSR); - if (!(status & SCxSR_TDxE(port))) { - ctrl = sci_in(port, SCSCR); - if (uart_circ_empty(xmit)) - ctrl &= ~SCI_CTRL_FLAGS_TIE; - else - ctrl |= SCI_CTRL_FLAGS_TIE; - sci_out(port, SCSCR, ctrl); - return; - } - - if (port->type == PORT_SCI) - count = sci_txroom(port); - else - count = scif_txroom(port); - - do { - unsigned char c; - - if (port->x_char) { - c = port->x_char; - port->x_char = 0; - } else if (!uart_circ_empty(xmit) && !stopped) { - c = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - } else { - break; - } - - sci_out(port, SCxTDR, c); - - port->icount.tx++; - } while (--count > 0); - - sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - if (uart_circ_empty(xmit)) { - sci_stop_tx(port); - } else { - ctrl = sci_in(port, SCSCR); - - if (port->type != PORT_SCI) { - sci_in(port, SCxSR); /* Dummy read */ - sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); - } - - ctrl |= SCI_CTRL_FLAGS_TIE; - sci_out(port, SCSCR, ctrl); - } -} - -/* On SH3, SCIF may read end-of-break as a space->mark char */ -#define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); }) - -static inline void sci_receive_chars(struct uart_port *port) -{ - struct sci_port *sci_port = to_sci_port(port); - struct tty_struct *tty = port->state->port.tty; - int i, count, copied = 0; - unsigned short status; - unsigned char flag; - - status = sci_in(port, SCxSR); - if (!(status & SCxSR_RDxF(port))) - return; - - while (1) { - if (port->type == PORT_SCI) - count = sci_rxfill(port); - else - count = scif_rxfill(port); - - /* Don't copy more bytes than there is room for in the buffer */ - count = tty_buffer_request_room(tty, count); - - /* If for any reason we can't copy more data, we're done! */ - if (count == 0) - break; - - if (port->type == PORT_SCI) { - char c = sci_in(port, SCxRDR); - if (uart_handle_sysrq_char(port, c) || - sci_port->break_flag) - count = 0; - else - tty_insert_flip_char(tty, c, TTY_NORMAL); - } else { - for (i = 0; i < count; i++) { - char c = sci_in(port, SCxRDR); - status = sci_in(port, SCxSR); -#if defined(CONFIG_CPU_SH3) - /* Skip "chars" during break */ - if (sci_port->break_flag) { - if ((c == 0) && - (status & SCxSR_FER(port))) { - count--; i--; - continue; - } - - /* Nonzero => end-of-break */ - dev_dbg(port->dev, "debounce<%02x>\n", c); - sci_port->break_flag = 0; - - if (STEPFN(c)) { - count--; i--; - continue; - } - } -#endif /* CONFIG_CPU_SH3 */ - if (uart_handle_sysrq_char(port, c)) { - count--; i--; - continue; - } - - /* Store data and status */ - if (status & SCxSR_FER(port)) { - flag = TTY_FRAME; - dev_notice(port->dev, "frame error\n"); - } else if (status & SCxSR_PER(port)) { - flag = TTY_PARITY; - dev_notice(port->dev, "parity error\n"); - } else - flag = TTY_NORMAL; - - tty_insert_flip_char(tty, c, flag); - } - } - - sci_in(port, SCxSR); /* dummy read */ - sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); - - copied += count; - port->icount.rx += count; - } - - if (copied) { - /* Tell the rest of the system the news. New characters! */ - tty_flip_buffer_push(tty); - } else { - sci_in(port, SCxSR); /* dummy read */ - sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); - } -} - -#define SCI_BREAK_JIFFIES (HZ/20) -/* The sci generates interrupts during the break, - * 1 per millisecond or so during the break period, for 9600 baud. - * So dont bother disabling interrupts. - * But dont want more than 1 break event. - * Use a kernel timer to periodically poll the rx line until - * the break is finished. - */ -static void sci_schedule_break_timer(struct sci_port *port) -{ - port->break_timer.expires = jiffies + SCI_BREAK_JIFFIES; - add_timer(&port->break_timer); -} -/* Ensure that two consecutive samples find the break over. */ -static void sci_break_timer(unsigned long data) -{ - struct sci_port *port = (struct sci_port *)data; - - if (sci_rxd_in(&port->port) == 0) { - port->break_flag = 1; - sci_schedule_break_timer(port); - } else if (port->break_flag == 1) { - /* break is over. */ - port->break_flag = 2; - sci_schedule_break_timer(port); - } else - port->break_flag = 0; -} - -static inline int sci_handle_errors(struct uart_port *port) -{ - int copied = 0; - unsigned short status = sci_in(port, SCxSR); - struct tty_struct *tty = port->state->port.tty; - - if (status & SCxSR_ORER(port)) { - /* overrun error */ - if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) - copied++; - - dev_notice(port->dev, "overrun error"); - } - - if (status & SCxSR_FER(port)) { - if (sci_rxd_in(port) == 0) { - /* Notify of BREAK */ - struct sci_port *sci_port = to_sci_port(port); - - if (!sci_port->break_flag) { - sci_port->break_flag = 1; - sci_schedule_break_timer(sci_port); - - /* Do sysrq handling. */ - if (uart_handle_break(port)) - return 0; - - dev_dbg(port->dev, "BREAK detected\n"); - - if (tty_insert_flip_char(tty, 0, TTY_BREAK)) - copied++; - } - - } else { - /* frame error */ - if (tty_insert_flip_char(tty, 0, TTY_FRAME)) - copied++; - - dev_notice(port->dev, "frame error\n"); - } - } - - if (status & SCxSR_PER(port)) { - /* parity error */ - if (tty_insert_flip_char(tty, 0, TTY_PARITY)) - copied++; - - dev_notice(port->dev, "parity error"); - } - - if (copied) - tty_flip_buffer_push(tty); - - return copied; -} - -static inline int sci_handle_fifo_overrun(struct uart_port *port) -{ - struct tty_struct *tty = port->state->port.tty; - int copied = 0; - - if (port->type != PORT_SCIF) - return 0; - - if ((sci_in(port, SCLSR) & SCIF_ORER) != 0) { - sci_out(port, SCLSR, 0); - - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - tty_flip_buffer_push(tty); - - dev_notice(port->dev, "overrun error\n"); - copied++; - } - - return copied; -} - -static inline int sci_handle_breaks(struct uart_port *port) -{ - int copied = 0; - unsigned short status = sci_in(port, SCxSR); - struct tty_struct *tty = port->state->port.tty; - struct sci_port *s = to_sci_port(port); - - if (uart_handle_break(port)) - return 0; - - if (!s->break_flag && status & SCxSR_BRK(port)) { -#if defined(CONFIG_CPU_SH3) - /* Debounce break */ - s->break_flag = 1; -#endif - /* Notify of BREAK */ - if (tty_insert_flip_char(tty, 0, TTY_BREAK)) - copied++; - - dev_dbg(port->dev, "BREAK detected\n"); - } - - if (copied) - tty_flip_buffer_push(tty); - - copied += sci_handle_fifo_overrun(port); - - return copied; -} - -static irqreturn_t sci_rx_interrupt(int irq, void *ptr) -{ -#ifdef CONFIG_SERIAL_SH_SCI_DMA - struct uart_port *port = ptr; - struct sci_port *s = to_sci_port(port); - - if (s->chan_rx) { - u16 scr = sci_in(port, SCSCR); - u16 ssr = sci_in(port, SCxSR); - - /* Disable future Rx interrupts */ - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - disable_irq_nosync(irq); - scr |= 0x4000; - } else { - scr &= ~SCI_CTRL_FLAGS_RIE; - } - sci_out(port, SCSCR, scr); - /* Clear current interrupt */ - sci_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port))); - dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n", - jiffies, s->rx_timeout); - mod_timer(&s->rx_timer, jiffies + s->rx_timeout); - - return IRQ_HANDLED; - } -#endif - - /* I think sci_receive_chars has to be called irrespective - * of whether the I_IXOFF is set, otherwise, how is the interrupt - * to be disabled? - */ - sci_receive_chars(ptr); - - return IRQ_HANDLED; -} - -static irqreturn_t sci_tx_interrupt(int irq, void *ptr) -{ - struct uart_port *port = ptr; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - sci_transmit_chars(port); - spin_unlock_irqrestore(&port->lock, flags); - - return IRQ_HANDLED; -} - -static irqreturn_t sci_er_interrupt(int irq, void *ptr) -{ - struct uart_port *port = ptr; - - /* Handle errors */ - if (port->type == PORT_SCI) { - if (sci_handle_errors(port)) { - /* discard character in rx buffer */ - sci_in(port, SCxSR); - sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); - } - } else { - sci_handle_fifo_overrun(port); - sci_rx_interrupt(irq, ptr); - } - - sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); - - /* Kick the transmission */ - sci_tx_interrupt(irq, ptr); - - return IRQ_HANDLED; -} - -static irqreturn_t sci_br_interrupt(int irq, void *ptr) -{ - struct uart_port *port = ptr; - - /* Handle BREAKs */ - sci_handle_breaks(port); - sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); - - return IRQ_HANDLED; -} - -static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) -{ - unsigned short ssr_status, scr_status, err_enabled; - struct uart_port *port = ptr; - struct sci_port *s = to_sci_port(port); - irqreturn_t ret = IRQ_NONE; - - ssr_status = sci_in(port, SCxSR); - scr_status = sci_in(port, SCSCR); - err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE); - - /* Tx Interrupt */ - if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE) && - !s->chan_tx) - ret = sci_tx_interrupt(irq, ptr); - /* - * Rx Interrupt: if we're using DMA, the DMA controller clears RDF / - * DR flags - */ - if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) && - (scr_status & SCI_CTRL_FLAGS_RIE)) - ret = sci_rx_interrupt(irq, ptr); - /* Error Interrupt */ - if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled) - ret = sci_er_interrupt(irq, ptr); - /* Break Interrupt */ - if ((ssr_status & SCxSR_BRK(port)) && err_enabled) - ret = sci_br_interrupt(irq, ptr); - - return ret; -} - -/* - * Here we define a transistion notifier so that we can update all of our - * ports' baud rate when the peripheral clock changes. - */ -static int sci_notifier(struct notifier_block *self, - unsigned long phase, void *p) -{ - struct sh_sci_priv *priv = container_of(self, - struct sh_sci_priv, clk_nb); - struct sci_port *sci_port; - unsigned long flags; - - if ((phase == CPUFREQ_POSTCHANGE) || - (phase == CPUFREQ_RESUMECHANGE)) { - spin_lock_irqsave(&priv->lock, flags); - list_for_each_entry(sci_port, &priv->ports, node) - sci_port->port.uartclk = clk_get_rate(sci_port->iclk); - spin_unlock_irqrestore(&priv->lock, flags); - } - - return NOTIFY_OK; -} - -static void sci_clk_enable(struct uart_port *port) -{ - struct sci_port *sci_port = to_sci_port(port); - - clk_enable(sci_port->iclk); - sci_port->port.uartclk = clk_get_rate(sci_port->iclk); - clk_enable(sci_port->fclk); -} - -static void sci_clk_disable(struct uart_port *port) -{ - struct sci_port *sci_port = to_sci_port(port); - - clk_disable(sci_port->fclk); - clk_disable(sci_port->iclk); -} - -static int sci_request_irq(struct sci_port *port) -{ - int i; - irqreturn_t (*handlers[4])(int irq, void *ptr) = { - sci_er_interrupt, sci_rx_interrupt, sci_tx_interrupt, - sci_br_interrupt, - }; - const char *desc[] = { "SCI Receive Error", "SCI Receive Data Full", - "SCI Transmit Data Empty", "SCI Break" }; - - if (port->irqs[0] == port->irqs[1]) { - if (unlikely(!port->irqs[0])) - return -ENODEV; - - if (request_irq(port->irqs[0], sci_mpxed_interrupt, - IRQF_DISABLED, "sci", port)) { - dev_err(port->port.dev, "Can't allocate IRQ\n"); - return -ENODEV; - } - } else { - for (i = 0; i < ARRAY_SIZE(handlers); i++) { - if (unlikely(!port->irqs[i])) - continue; - - if (request_irq(port->irqs[i], handlers[i], - IRQF_DISABLED, desc[i], port)) { - dev_err(port->port.dev, "Can't allocate IRQ\n"); - return -ENODEV; - } - } - } - - return 0; -} - -static void sci_free_irq(struct sci_port *port) -{ - int i; - - if (port->irqs[0] == port->irqs[1]) - free_irq(port->irqs[0], port); - else { - for (i = 0; i < ARRAY_SIZE(port->irqs); i++) { - if (!port->irqs[i]) - continue; - - free_irq(port->irqs[i], port); - } - } -} - -static unsigned int sci_tx_empty(struct uart_port *port) -{ - unsigned short status = sci_in(port, SCxSR); - unsigned short in_tx_fifo = scif_txfill(port); - - return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0; -} - -static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* This routine is used for seting signals of: DTR, DCD, CTS/RTS */ - /* We use SCIF's hardware for CTS/RTS, so don't need any for that. */ - /* If you have signals for DTR and DCD, please implement here. */ -} - -static unsigned int sci_get_mctrl(struct uart_port *port) -{ - /* This routine is used for getting signals of: DTR, DCD, DSR, RI, - and CTS/RTS */ - - return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR; -} - -#ifdef CONFIG_SERIAL_SH_SCI_DMA -static void sci_dma_tx_complete(void *arg) -{ - struct sci_port *s = arg; - struct uart_port *port = &s->port; - struct circ_buf *xmit = &port->state->xmit; - unsigned long flags; - - dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); - - spin_lock_irqsave(&port->lock, flags); - - xmit->tail += sg_dma_len(&s->sg_tx); - xmit->tail &= UART_XMIT_SIZE - 1; - - port->icount.tx += sg_dma_len(&s->sg_tx); - - async_tx_ack(s->desc_tx); - s->cookie_tx = -EINVAL; - s->desc_tx = NULL; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (!uart_circ_empty(xmit)) { - schedule_work(&s->work_tx); - } else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - u16 ctrl = sci_in(port, SCSCR); - sci_out(port, SCSCR, ctrl & ~SCI_CTRL_FLAGS_TIE); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* Locking: called with port lock held */ -static int sci_dma_rx_push(struct sci_port *s, struct tty_struct *tty, - size_t count) -{ - struct uart_port *port = &s->port; - int i, active, room; - - room = tty_buffer_request_room(tty, count); - - if (s->active_rx == s->cookie_rx[0]) { - active = 0; - } else if (s->active_rx == s->cookie_rx[1]) { - active = 1; - } else { - dev_err(port->dev, "cookie %d not found!\n", s->active_rx); - return 0; - } - - if (room < count) - dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", - count - room); - if (!room) - return room; - - for (i = 0; i < room; i++) - tty_insert_flip_char(tty, ((u8 *)sg_virt(&s->sg_rx[active]))[i], - TTY_NORMAL); - - port->icount.rx += room; - - return room; -} - -static void sci_dma_rx_complete(void *arg) -{ - struct sci_port *s = arg; - struct uart_port *port = &s->port; - struct tty_struct *tty = port->state->port.tty; - unsigned long flags; - int count; - - dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx); - - spin_lock_irqsave(&port->lock, flags); - - count = sci_dma_rx_push(s, tty, s->buf_len_rx); - - mod_timer(&s->rx_timer, jiffies + s->rx_timeout); - - spin_unlock_irqrestore(&port->lock, flags); - - if (count) - tty_flip_buffer_push(tty); - - schedule_work(&s->work_rx); -} - -static void sci_start_rx(struct uart_port *port); -static void sci_start_tx(struct uart_port *port); - -static void sci_rx_dma_release(struct sci_port *s, bool enable_pio) -{ - struct dma_chan *chan = s->chan_rx; - struct uart_port *port = &s->port; - - s->chan_rx = NULL; - s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL; - dma_release_channel(chan); - if (sg_dma_address(&s->sg_rx[0])) - dma_free_coherent(port->dev, s->buf_len_rx * 2, - sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0])); - if (enable_pio) - sci_start_rx(port); -} - -static void sci_tx_dma_release(struct sci_port *s, bool enable_pio) -{ - struct dma_chan *chan = s->chan_tx; - struct uart_port *port = &s->port; - - s->chan_tx = NULL; - s->cookie_tx = -EINVAL; - dma_release_channel(chan); - if (enable_pio) - sci_start_tx(port); -} - -static void sci_submit_rx(struct sci_port *s) -{ - struct dma_chan *chan = s->chan_rx; - int i; - - for (i = 0; i < 2; i++) { - struct scatterlist *sg = &s->sg_rx[i]; - struct dma_async_tx_descriptor *desc; - - desc = chan->device->device_prep_slave_sg(chan, - sg, 1, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT); - - if (desc) { - s->desc_rx[i] = desc; - desc->callback = sci_dma_rx_complete; - desc->callback_param = s; - s->cookie_rx[i] = desc->tx_submit(desc); - } - - if (!desc || s->cookie_rx[i] < 0) { - if (i) { - async_tx_ack(s->desc_rx[0]); - s->cookie_rx[0] = -EINVAL; - } - if (desc) { - async_tx_ack(desc); - s->cookie_rx[i] = -EINVAL; - } - dev_warn(s->port.dev, - "failed to re-start DMA, using PIO\n"); - sci_rx_dma_release(s, true); - return; - } - dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__, - s->cookie_rx[i], i); - } - - s->active_rx = s->cookie_rx[0]; - - dma_async_issue_pending(chan); -} - -static void work_fn_rx(struct work_struct *work) -{ - struct sci_port *s = container_of(work, struct sci_port, work_rx); - struct uart_port *port = &s->port; - struct dma_async_tx_descriptor *desc; - int new; - - if (s->active_rx == s->cookie_rx[0]) { - new = 0; - } else if (s->active_rx == s->cookie_rx[1]) { - new = 1; - } else { - dev_err(port->dev, "cookie %d not found!\n", s->active_rx); - return; - } - desc = s->desc_rx[new]; - - if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) != - DMA_SUCCESS) { - /* Handle incomplete DMA receive */ - struct tty_struct *tty = port->state->port.tty; - struct dma_chan *chan = s->chan_rx; - struct sh_desc *sh_desc = container_of(desc, struct sh_desc, - async_tx); - unsigned long flags; - int count; - - chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); - dev_dbg(port->dev, "Read %u bytes with cookie %d\n", - sh_desc->partial, sh_desc->cookie); - - spin_lock_irqsave(&port->lock, flags); - count = sci_dma_rx_push(s, tty, sh_desc->partial); - spin_unlock_irqrestore(&port->lock, flags); - - if (count) - tty_flip_buffer_push(tty); - - sci_submit_rx(s); - - return; - } - - s->cookie_rx[new] = desc->tx_submit(desc); - if (s->cookie_rx[new] < 0) { - dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n"); - sci_rx_dma_release(s, true); - return; - } - - s->active_rx = s->cookie_rx[!new]; - - dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__, - s->cookie_rx[new], new, s->active_rx); -} - -static void work_fn_tx(struct work_struct *work) -{ - struct sci_port *s = container_of(work, struct sci_port, work_tx); - struct dma_async_tx_descriptor *desc; - struct dma_chan *chan = s->chan_tx; - struct uart_port *port = &s->port; - struct circ_buf *xmit = &port->state->xmit; - struct scatterlist *sg = &s->sg_tx; - - /* - * DMA is idle now. - * Port xmit buffer is already mapped, and it is one page... Just adjust - * offsets and lengths. Since it is a circular buffer, we have to - * transmit till the end, and then the rest. Take the port lock to get a - * consistent xmit buffer state. - */ - spin_lock_irq(&port->lock); - sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); - sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + - sg->offset; - sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), - CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE)); - spin_unlock_irq(&port->lock); - - BUG_ON(!sg_dma_len(sg)); - - desc = chan->device->device_prep_slave_sg(chan, - sg, s->sg_len_tx, DMA_TO_DEVICE, - DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) { - /* switch to PIO */ - sci_tx_dma_release(s, true); - return; - } - - dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); - - spin_lock_irq(&port->lock); - s->desc_tx = desc; - desc->callback = sci_dma_tx_complete; - desc->callback_param = s; - spin_unlock_irq(&port->lock); - s->cookie_tx = desc->tx_submit(desc); - if (s->cookie_tx < 0) { - dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n"); - /* switch to PIO */ - sci_tx_dma_release(s, true); - return; - } - - dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__, - xmit->buf, xmit->tail, xmit->head, s->cookie_tx); - - dma_async_issue_pending(chan); -} -#endif - -static void sci_start_tx(struct uart_port *port) -{ - struct sci_port *s = to_sci_port(port); - unsigned short ctrl; - -#ifdef CONFIG_SERIAL_SH_SCI_DMA - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - u16 new, scr = sci_in(port, SCSCR); - if (s->chan_tx) - new = scr | 0x8000; - else - new = scr & ~0x8000; - if (new != scr) - sci_out(port, SCSCR, new); - } - if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && - s->cookie_tx < 0) - schedule_work(&s->work_tx); -#endif - if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ - ctrl = sci_in(port, SCSCR); - sci_out(port, SCSCR, ctrl | SCI_CTRL_FLAGS_TIE); - } -} - -static void sci_stop_tx(struct uart_port *port) -{ - unsigned short ctrl; - - /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ - ctrl = sci_in(port, SCSCR); - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) - ctrl &= ~0x8000; - ctrl &= ~SCI_CTRL_FLAGS_TIE; - sci_out(port, SCSCR, ctrl); -} - -static void sci_start_rx(struct uart_port *port) -{ - unsigned short ctrl = SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE; - - /* Set RIE (Receive Interrupt Enable) bit in SCSCR */ - ctrl |= sci_in(port, SCSCR); - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) - ctrl &= ~0x4000; - sci_out(port, SCSCR, ctrl); -} - -static void sci_stop_rx(struct uart_port *port) -{ - unsigned short ctrl; - - /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */ - ctrl = sci_in(port, SCSCR); - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) - ctrl &= ~0x4000; - ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE); - sci_out(port, SCSCR, ctrl); -} - -static void sci_enable_ms(struct uart_port *port) -{ - /* Nothing here yet .. */ -} - -static void sci_break_ctl(struct uart_port *port, int break_state) -{ - /* Nothing here yet .. */ -} - -#ifdef CONFIG_SERIAL_SH_SCI_DMA -static bool filter(struct dma_chan *chan, void *slave) -{ - struct sh_dmae_slave *param = slave; - - dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__, - param->slave_id); - - if (param->dma_dev == chan->device->dev) { - chan->private = param; - return true; - } else { - return false; - } -} - -static void rx_timer_fn(unsigned long arg) -{ - struct sci_port *s = (struct sci_port *)arg; - struct uart_port *port = &s->port; - u16 scr = sci_in(port, SCSCR); - - if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { - scr &= ~0x4000; - enable_irq(s->irqs[1]); - } - sci_out(port, SCSCR, scr | SCI_CTRL_FLAGS_RIE); - dev_dbg(port->dev, "DMA Rx timed out\n"); - schedule_work(&s->work_rx); -} - -static void sci_request_dma(struct uart_port *port) -{ - struct sci_port *s = to_sci_port(port); - struct sh_dmae_slave *param; - struct dma_chan *chan; - dma_cap_mask_t mask; - int nent; - - dev_dbg(port->dev, "%s: port %d DMA %p\n", __func__, - port->line, s->dma_dev); - - if (!s->dma_dev) - return; - - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - param = &s->param_tx; - - /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */ - param->slave_id = s->slave_tx; - param->dma_dev = s->dma_dev; - - s->cookie_tx = -EINVAL; - chan = dma_request_channel(mask, filter, param); - dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan); - if (chan) { - s->chan_tx = chan; - sg_init_table(&s->sg_tx, 1); - /* UART circular tx buffer is an aligned page. */ - BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK); - sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf), - UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK); - nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE); - if (!nent) - sci_tx_dma_release(s, false); - else - dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__, - sg_dma_len(&s->sg_tx), - port->state->xmit.buf, sg_dma_address(&s->sg_tx)); - - s->sg_len_tx = nent; - - INIT_WORK(&s->work_tx, work_fn_tx); - } - - param = &s->param_rx; - - /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */ - param->slave_id = s->slave_rx; - param->dma_dev = s->dma_dev; - - chan = dma_request_channel(mask, filter, param); - dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan); - if (chan) { - dma_addr_t dma[2]; - void *buf[2]; - int i; - - s->chan_rx = chan; - - s->buf_len_rx = 2 * max(16, (int)port->fifosize); - buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2, - &dma[0], GFP_KERNEL); - - if (!buf[0]) { - dev_warn(port->dev, - "failed to allocate dma buffer, using PIO\n"); - sci_rx_dma_release(s, true); - return; - } - - buf[1] = buf[0] + s->buf_len_rx; - dma[1] = dma[0] + s->buf_len_rx; - - for (i = 0; i < 2; i++) { - struct scatterlist *sg = &s->sg_rx[i]; - - sg_init_table(sg, 1); - sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx, - (int)buf[i] & ~PAGE_MASK); - sg_dma_address(sg) = dma[i]; - } - - INIT_WORK(&s->work_rx, work_fn_rx); - setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s); - - sci_submit_rx(s); - } -} - -static void sci_free_dma(struct uart_port *port) -{ - struct sci_port *s = to_sci_port(port); - - if (!s->dma_dev) - return; - - if (s->chan_tx) - sci_tx_dma_release(s, false); - if (s->chan_rx) - sci_rx_dma_release(s, false); -} -#endif - -static int sci_startup(struct uart_port *port) -{ - struct sci_port *s = to_sci_port(port); - - dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); - - if (s->enable) - s->enable(port); - - sci_request_irq(s); -#ifdef CONFIG_SERIAL_SH_SCI_DMA - sci_request_dma(port); -#endif - sci_start_tx(port); - sci_start_rx(port); - - return 0; -} - -static void sci_shutdown(struct uart_port *port) -{ - struct sci_port *s = to_sci_port(port); - - dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); - - sci_stop_rx(port); - sci_stop_tx(port); -#ifdef CONFIG_SERIAL_SH_SCI_DMA - sci_free_dma(port); -#endif - sci_free_irq(s); - - if (s->disable) - s->disable(port); -} - -static void sci_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ -#ifdef CONFIG_SERIAL_SH_SCI_DMA - struct sci_port *s = to_sci_port(port); -#endif - unsigned int status, baud, smr_val, max_baud; - int t = -1; - u16 scfcr = 0; - - /* - * earlyprintk comes here early on with port->uartclk set to zero. - * the clock framework is not up and running at this point so here - * we assume that 115200 is the maximum baud rate. please note that - * the baud rate is not programmed during earlyprintk - it is assumed - * that the previous boot loader has enabled required clocks and - * setup the baud rate generator hardware for us already. - */ - max_baud = port->uartclk ? port->uartclk / 16 : 115200; - - baud = uart_get_baud_rate(port, termios, old, 0, max_baud); - if (likely(baud && port->uartclk)) - t = SCBRR_VALUE(baud, port->uartclk); - - do { - status = sci_in(port, SCxSR); - } while (!(status & SCxSR_TEND(port))); - - sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ - - if (port->type != PORT_SCI) - sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST); - - smr_val = sci_in(port, SCSMR) & 3; - if ((termios->c_cflag & CSIZE) == CS7) - smr_val |= 0x40; - if (termios->c_cflag & PARENB) - smr_val |= 0x20; - if (termios->c_cflag & PARODD) - smr_val |= 0x30; - if (termios->c_cflag & CSTOPB) - smr_val |= 0x08; - - uart_update_timeout(port, termios->c_cflag, baud); - - sci_out(port, SCSMR, smr_val); - - dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t, - SCSCR_INIT(port)); - - if (t > 0) { - if (t >= 256) { - sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1); - t >>= 2; - } else - sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3); - - sci_out(port, SCBRR, t); - udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */ - } - - sci_init_pins(port, termios->c_cflag); - sci_out(port, SCFCR, scfcr | ((termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0)); - - sci_out(port, SCSCR, SCSCR_INIT(port)); - -#ifdef CONFIG_SERIAL_SH_SCI_DMA - /* - * Calculate delay for 1.5 DMA buffers: see - * drivers/serial/serial_core.c::uart_update_timeout(). With 10 bits - * (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function - * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)." - * Then below we calculate 3 jiffies (12ms) for 1.5 DMA buffers (3 FIFO - * sizes), but it has been found out experimentally, that this is not - * enough: the driver too often needlessly runs on a DMA timeout. 20ms - * as a minimum seem to work perfectly. - */ - if (s->chan_rx) { - s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 / - port->fifosize / 2; - dev_dbg(port->dev, - "DMA Rx t-out %ums, tty t-out %u jiffies\n", - s->rx_timeout * 1000 / HZ, port->timeout); - if (s->rx_timeout < msecs_to_jiffies(20)) - s->rx_timeout = msecs_to_jiffies(20); - } -#endif - - if ((termios->c_cflag & CREAD) != 0) - sci_start_rx(port); -} - -static const char *sci_type(struct uart_port *port) -{ - switch (port->type) { - case PORT_IRDA: - return "irda"; - case PORT_SCI: - return "sci"; - case PORT_SCIF: - return "scif"; - case PORT_SCIFA: - return "scifa"; - case PORT_SCIFB: - return "scifb"; - } - - return NULL; -} - -static void sci_release_port(struct uart_port *port) -{ - /* Nothing here yet .. */ -} - -static int sci_request_port(struct uart_port *port) -{ - /* Nothing here yet .. */ - return 0; -} - -static void sci_config_port(struct uart_port *port, int flags) -{ - struct sci_port *s = to_sci_port(port); - - port->type = s->type; - - if (port->membase) - return; - - if (port->flags & UPF_IOREMAP) { - port->membase = ioremap_nocache(port->mapbase, 0x40); - - if (IS_ERR(port->membase)) - dev_err(port->dev, "can't remap port#%d\n", port->line); - } else { - /* - * For the simple (and majority of) cases where we don't - * need to do any remapping, just cast the cookie - * directly. - */ - port->membase = (void __iomem *)port->mapbase; - } -} - -static int sci_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - struct sci_port *s = to_sci_port(port); - - if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs) - return -EINVAL; - if (ser->baud_base < 2400) - /* No paper tape reader for Mitch.. */ - return -EINVAL; - - return 0; -} - -static struct uart_ops sci_uart_ops = { - .tx_empty = sci_tx_empty, - .set_mctrl = sci_set_mctrl, - .get_mctrl = sci_get_mctrl, - .start_tx = sci_start_tx, - .stop_tx = sci_stop_tx, - .stop_rx = sci_stop_rx, - .enable_ms = sci_enable_ms, - .break_ctl = sci_break_ctl, - .startup = sci_startup, - .shutdown = sci_shutdown, - .set_termios = sci_set_termios, - .type = sci_type, - .release_port = sci_release_port, - .request_port = sci_request_port, - .config_port = sci_config_port, - .verify_port = sci_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = sci_poll_get_char, - .poll_put_char = sci_poll_put_char, -#endif -}; - -static int __devinit sci_init_single(struct platform_device *dev, - struct sci_port *sci_port, - unsigned int index, - struct plat_sci_port *p) -{ - struct uart_port *port = &sci_port->port; - - port->ops = &sci_uart_ops; - port->iotype = UPIO_MEM; - port->line = index; - - switch (p->type) { - case PORT_SCIFB: - port->fifosize = 256; - break; - case PORT_SCIFA: - port->fifosize = 64; - break; - case PORT_SCIF: - port->fifosize = 16; - break; - default: - port->fifosize = 1; - break; - } - - if (dev) { - sci_port->iclk = clk_get(&dev->dev, "sci_ick"); - if (IS_ERR(sci_port->iclk)) { - sci_port->iclk = clk_get(&dev->dev, "peripheral_clk"); - if (IS_ERR(sci_port->iclk)) { - dev_err(&dev->dev, "can't get iclk\n"); - return PTR_ERR(sci_port->iclk); - } - } - - /* - * The function clock is optional, ignore it if we can't - * find it. - */ - sci_port->fclk = clk_get(&dev->dev, "sci_fck"); - if (IS_ERR(sci_port->fclk)) - sci_port->fclk = NULL; - - sci_port->enable = sci_clk_enable; - sci_port->disable = sci_clk_disable; - port->dev = &dev->dev; - } - - sci_port->break_timer.data = (unsigned long)sci_port; - sci_port->break_timer.function = sci_break_timer; - init_timer(&sci_port->break_timer); - - port->mapbase = p->mapbase; - port->membase = p->membase; - - port->irq = p->irqs[SCIx_TXI_IRQ]; - port->flags = p->flags; - sci_port->type = port->type = p->type; - -#ifdef CONFIG_SERIAL_SH_SCI_DMA - sci_port->dma_dev = p->dma_dev; - sci_port->slave_tx = p->dma_slave_tx; - sci_port->slave_rx = p->dma_slave_rx; - - dev_dbg(port->dev, "%s: DMA device %p, tx %d, rx %d\n", __func__, - p->dma_dev, p->dma_slave_tx, p->dma_slave_rx); -#endif - - memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); - return 0; -} - -#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE -static struct tty_driver *serial_console_device(struct console *co, int *index) -{ - struct uart_driver *p = &sci_uart_driver; - *index = co->index; - return p->tty_driver; -} - -static void serial_console_putchar(struct uart_port *port, int ch) -{ - sci_poll_put_char(port, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - */ -static void serial_console_write(struct console *co, const char *s, - unsigned count) -{ - struct uart_port *port = co->data; - struct sci_port *sci_port = to_sci_port(port); - unsigned short bits; - - if (sci_port->enable) - sci_port->enable(port); - - uart_console_write(port, s, count, serial_console_putchar); - - /* wait until fifo is empty and last bit has been transmitted */ - bits = SCxSR_TDxE(port) | SCxSR_TEND(port); - while ((sci_in(port, SCxSR) & bits) != bits) - cpu_relax(); - - if (sci_port->disable) - sci_port->disable(port); -} - -static int __devinit serial_console_setup(struct console *co, char *options) -{ - struct sci_port *sci_port; - struct uart_port *port; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - int ret; - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= SCI_NPORTS) - co->index = 0; - - if (co->data) { - port = co->data; - sci_port = to_sci_port(port); - } else { - sci_port = &sci_ports[co->index]; - port = &sci_port->port; - co->data = port; - } - - /* - * Also need to check port->type, we don't actually have any - * UPIO_PORT ports, but uart_report_port() handily misreports - * it anyways if we don't have a port available by the time this is - * called. - */ - if (!port->type) - return -ENODEV; - - sci_config_port(port, 0); - - if (sci_port->enable) - sci_port->enable(port); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - ret = uart_set_options(port, co, baud, parity, bits, flow); -#if defined(__H8300H__) || defined(__H8300S__) - /* disable rx interrupt */ - if (ret == 0) - sci_stop_rx(port); -#endif - /* TODO: disable clock */ - return ret; -} - -static struct console serial_console = { - .name = "ttySC", - .device = serial_console_device, - .write = serial_console_write, - .setup = serial_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -static int __init sci_console_init(void) -{ - register_console(&serial_console); - return 0; -} -console_initcall(sci_console_init); - -static struct sci_port early_serial_port; -static struct console early_serial_console = { - .name = "early_ttySC", - .write = serial_console_write, - .flags = CON_PRINTBUFFER, -}; -static char early_serial_buf[32]; - -#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ - -#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) -#define SCI_CONSOLE (&serial_console) -#else -#define SCI_CONSOLE 0 -#endif - -static char banner[] __initdata = - KERN_INFO "SuperH SCI(F) driver initialized\n"; - -static struct uart_driver sci_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "sci", - .dev_name = "ttySC", - .major = SCI_MAJOR, - .minor = SCI_MINOR_START, - .nr = SCI_NPORTS, - .cons = SCI_CONSOLE, -}; - - -static int sci_remove(struct platform_device *dev) -{ - struct sh_sci_priv *priv = platform_get_drvdata(dev); - struct sci_port *p; - unsigned long flags; - - cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); - - spin_lock_irqsave(&priv->lock, flags); - list_for_each_entry(p, &priv->ports, node) { - uart_remove_one_port(&sci_uart_driver, &p->port); - clk_put(p->iclk); - clk_put(p->fclk); - } - spin_unlock_irqrestore(&priv->lock, flags); - - kfree(priv); - return 0; -} - -static int __devinit sci_probe_single(struct platform_device *dev, - unsigned int index, - struct plat_sci_port *p, - struct sci_port *sciport) -{ - struct sh_sci_priv *priv = platform_get_drvdata(dev); - unsigned long flags; - int ret; - - /* Sanity check */ - if (unlikely(index >= SCI_NPORTS)) { - dev_notice(&dev->dev, "Attempting to register port " - "%d when only %d are available.\n", - index+1, SCI_NPORTS); - dev_notice(&dev->dev, "Consider bumping " - "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); - return 0; - } - - ret = sci_init_single(dev, sciport, index, p); - if (ret) - return ret; - - ret = uart_add_one_port(&sci_uart_driver, &sciport->port); - if (ret) - return ret; - - INIT_LIST_HEAD(&sciport->node); - - spin_lock_irqsave(&priv->lock, flags); - list_add(&sciport->node, &priv->ports); - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -/* - * Register a set of serial devices attached to a platform device. The - * list is terminated with a zero flags entry, which means we expect - * all entries to have at least UPF_BOOT_AUTOCONF set. Platforms that need - * remapping (such as sh64) should also set UPF_IOREMAP. - */ -static int __devinit sci_probe(struct platform_device *dev) -{ - struct plat_sci_port *p = dev->dev.platform_data; - struct sh_sci_priv *priv; - int i, ret = -EINVAL; - -#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE - if (is_early_platform_device(dev)) { - if (dev->id == -1) - return -ENOTSUPP; - early_serial_console.index = dev->id; - early_serial_console.data = &early_serial_port.port; - sci_init_single(NULL, &early_serial_port, dev->id, p); - serial_console_setup(&early_serial_console, early_serial_buf); - if (!strstr(early_serial_buf, "keep")) - early_serial_console.flags |= CON_BOOT; - register_console(&early_serial_console); - return 0; - } -#endif - - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - INIT_LIST_HEAD(&priv->ports); - spin_lock_init(&priv->lock); - platform_set_drvdata(dev, priv); - - priv->clk_nb.notifier_call = sci_notifier; - cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); - - if (dev->id != -1) { - ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]); - if (ret) - goto err_unreg; - } else { - for (i = 0; p && p->flags != 0; p++, i++) { - ret = sci_probe_single(dev, i, p, &sci_ports[i]); - if (ret) - goto err_unreg; - } - } - -#ifdef CONFIG_SH_STANDARD_BIOS - sh_bios_gdb_detach(); -#endif - - return 0; - -err_unreg: - sci_remove(dev); - return ret; -} - -static int sci_suspend(struct device *dev) -{ - struct sh_sci_priv *priv = dev_get_drvdata(dev); - struct sci_port *p; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - list_for_each_entry(p, &priv->ports, node) - uart_suspend_port(&sci_uart_driver, &p->port); - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -static int sci_resume(struct device *dev) -{ - struct sh_sci_priv *priv = dev_get_drvdata(dev); - struct sci_port *p; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - list_for_each_entry(p, &priv->ports, node) - uart_resume_port(&sci_uart_driver, &p->port); - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -static const struct dev_pm_ops sci_dev_pm_ops = { - .suspend = sci_suspend, - .resume = sci_resume, -}; - -static struct platform_driver sci_driver = { - .probe = sci_probe, - .remove = sci_remove, - .driver = { - .name = "sh-sci", - .owner = THIS_MODULE, - .pm = &sci_dev_pm_ops, - }, -}; - -static int __init sci_init(void) -{ - int ret; - - printk(banner); - - ret = uart_register_driver(&sci_uart_driver); - if (likely(ret == 0)) { - ret = platform_driver_register(&sci_driver); - if (unlikely(ret)) - uart_unregister_driver(&sci_uart_driver); - } - - return ret; -} - -static void __exit sci_exit(void) -{ - platform_driver_unregister(&sci_driver); - uart_unregister_driver(&sci_uart_driver); -} - -#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE -early_platform_init_buffer("earlyprintk", &sci_driver, - early_serial_buf, ARRAY_SIZE(early_serial_buf)); -#endif -module_init(sci_init); -module_exit(sci_exit); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:sh-sci"); diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h deleted file mode 100644 index 4bc614e4221c..000000000000 --- a/drivers/serial/sh-sci.h +++ /dev/null @@ -1,660 +0,0 @@ -#include -#include -#include - -#if defined(CONFIG_H83007) || defined(CONFIG_H83068) -#include -#endif -#if defined(CONFIG_H8S2678) -#include -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7708) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) -# define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ -# define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ -# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) -# define SCIF0 0xA4400000 -# define SCIF2 0xA4410000 -# define SCSMR_Ir 0xA44A0000 -# define IRDA_SCIF SCIF0 -# define SCPCR 0xA4000116 -# define SCPDR 0xA4000136 - -/* Set the clock source, - * SCIF2 (0xA4410000) -> External clock, SCK pin used as clock input - * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output - */ -# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 -#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define PORT_PTCR 0xA405011EUL -# define PORT_PVCR 0xA4050122UL -# define SCIF_ORER 0x0200 /* overrun error bit */ -#elif defined(CONFIG_SH_RTS7751R2D) -# define SCSPTR1 0xFFE0001C /* 8 bit SCIF */ -# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) -# define SCSPTR1 0xffe0001c /* 8 bit SCI */ -# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \ - 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ - 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) -#elif defined(CONFIG_CPU_SUBTYPE_SH7760) -# define SCSPTR0 0xfe600024 /* 16 bit SCIF */ -# define SCSPTR1 0xfe610024 /* 16 bit SCIF */ -# define SCSPTR2 0xfe620024 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) -# define SCSPTR0 0xA4400000 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define PACR 0xa4050100 -# define PBCR 0xa4050102 -# define SCSCR_INIT(port) 0x3B -#elif defined(CONFIG_CPU_SUBTYPE_SH7343) -# define SCSPTR0 0xffe00010 /* 16 bit SCIF */ -# define SCSPTR1 0xffe10010 /* 16 bit SCIF */ -# define SCSPTR2 0xffe20010 /* 16 bit SCIF */ -# define SCSPTR3 0xffe30010 /* 16 bit SCIF */ -# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7722) -# define PADR 0xA4050120 -# define PSDR 0xA405013e -# define PWDR 0xA4050166 -# define PSCR 0xA405011E -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7366) -# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */ -# define SCSPTR0 SCPDR0 -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) -# define SCSPTR0 0xa4050160 -# define SCSPTR1 0xa405013e -# define SCSPTR2 0xa4050160 -# define SCSPTR3 0xa405013e -# define SCSPTR4 0xa4050128 -# define SCSPTR5 0xa4050128 -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7724) -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) ((port)->type == PORT_SCIFA ? \ - 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ - 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) -#elif defined(CONFIG_CPU_SUBTYPE_SH4_202) -# define SCSPTR2 0xffe80020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) -# define SCIF_BASE_ADDR 0x01030000 -# define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR -# define SCIF_PTR2_OFFS 0x0000020 -# define SCIF_LSR2_OFFS 0x0000024 -# define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */ -# define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_H83007) || defined(CONFIG_H83068) -# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) -#elif defined(CONFIG_H8S2678) -# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) -#elif defined(CONFIG_CPU_SUBTYPE_SH7757) -# define SCSPTR0 0xfe4b0020 -# define SCSPTR1 0xfe4b0020 -# define SCSPTR2 0xfe4b0020 -# define SCIF_ORER 0x0001 -# define SCSCR_INIT(port) 0x38 -# define SCIF_ONLY -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -# define SCSPTR0 0xffe00024 /* 16 bit SCIF */ -# define SCSPTR1 0xffe08024 /* 16 bit SCIF */ -# define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7770) -# define SCSPTR0 0xff923020 /* 16 bit SCIF */ -# define SCSPTR1 0xff924020 /* 16 bit SCIF */ -# define SCSPTR2 0xff925020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7780) -# define SCSPTR0 0xffe00024 /* 16 bit SCIF */ -# define SCSPTR1 0xffe10024 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* Overrun error bit */ - -#if defined(CONFIG_SH_SH2007) -/* TIE=0,RIE=0,TE=1,RE=1,REIE=1,CKE1=0 */ -# define SCSCR_INIT(port) 0x38 -#else -/* TIE=0,RIE=0,TE=1,RE=1,REIE=1,CKE1=1 */ -# define SCSCR_INIT(port) 0x3a -#endif - -#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) -# define SCSPTR0 0xffea0024 /* 16 bit SCIF */ -# define SCSPTR1 0xffeb0024 /* 16 bit SCIF */ -# define SCSPTR2 0xffec0024 /* 16 bit SCIF */ -# define SCSPTR3 0xffed0024 /* 16 bit SCIF */ -# define SCSPTR4 0xffee0024 /* 16 bit SCIF */ -# define SCSPTR5 0xffef0024 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* Overrun error bit */ -# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ - defined(CONFIG_CPU_SUBTYPE_SH7203) || \ - defined(CONFIG_CPU_SUBTYPE_SH7206) || \ - defined(CONFIG_CPU_SUBTYPE_SH7263) -# define SCSPTR0 0xfffe8020 /* 16 bit SCIF */ -# define SCSPTR1 0xfffe8820 /* 16 bit SCIF */ -# define SCSPTR2 0xfffe9020 /* 16 bit SCIF */ -# define SCSPTR3 0xfffe9820 /* 16 bit SCIF */ -# if defined(CONFIG_CPU_SUBTYPE_SH7201) -# define SCSPTR4 0xfffeA020 /* 16 bit SCIF */ -# define SCSPTR5 0xfffeA820 /* 16 bit SCIF */ -# define SCSPTR6 0xfffeB020 /* 16 bit SCIF */ -# define SCSPTR7 0xfffeB820 /* 16 bit SCIF */ -# endif -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7619) -# define SCSPTR0 0xf8400020 /* 16 bit SCIF */ -# define SCSPTR1 0xf8410020 /* 16 bit SCIF */ -# define SCSPTR2 0xf8420020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#elif defined(CONFIG_CPU_SUBTYPE_SHX3) -# define SCSPTR0 0xffc30020 /* 16 bit SCIF */ -# define SCSPTR1 0xffc40020 /* 16 bit SCIF */ -# define SCSPTR2 0xffc50020 /* 16 bit SCIF */ -# define SCSPTR3 0xffc60020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* Overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -#else -# error CPU subtype not defined -#endif - -/* SCSCR */ -#define SCI_CTRL_FLAGS_TIE 0x80 /* all */ -#define SCI_CTRL_FLAGS_RIE 0x40 /* all */ -#define SCI_CTRL_FLAGS_TE 0x20 /* all */ -#define SCI_CTRL_FLAGS_RE 0x10 /* all */ -#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7722) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) || \ - defined(CONFIG_CPU_SUBTYPE_SHX3) -#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7724) -#define SCI_CTRL_FLAGS_REIE ((port)->type == PORT_SCIFA ? 0 : 8) -#else -#define SCI_CTRL_FLAGS_REIE 0 -#endif -/* SCI_CTRL_FLAGS_MPIE 0x08 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -/* SCI_CTRL_FLAGS_TEIE 0x04 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -/* SCI_CTRL_FLAGS_CKE1 0x02 * all */ -/* SCI_CTRL_FLAGS_CKE0 0x01 * 7707 SCI/SCIF, 7708 SCI, 7709 SCI/SCIF, 7750 SCI */ - -/* SCxSR SCI */ -#define SCI_TDRE 0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_RDRF 0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_ORER 0x20 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_FER 0x10 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_PER 0x08 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_TEND 0x04 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -/* SCI_MPB 0x02 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -/* SCI_MPBT 0x01 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ - -#define SCI_ERRORS ( SCI_PER | SCI_FER | SCI_ORER) - -/* SCxSR SCIF */ -#define SCIF_ER 0x0080 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_TEND 0x0040 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_TDFE 0x0020 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_BRK 0x0010 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_FER 0x0008 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_PER 0x0004 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_RDF 0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -# define SCIF_ORER 0x0200 -# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) -# define SCIF_RFDC_MASK 0x007f -# define SCIF_TXROOM_MAX 64 -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK ) -# define SCIF_RFDC_MASK 0x007f -# define SCIF_TXROOM_MAX 64 -/* SH7763 SCIF2 support */ -# define SCIF2_RFDC_MASK 0x001f -# define SCIF2_TXROOM_MAX 16 -#else -# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) -# define SCIF_RFDC_MASK 0x001f -# define SCIF_TXROOM_MAX 16 -#endif - -#ifndef SCIF_ORER -#define SCIF_ORER 0x0000 -#endif - -#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) -#define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS) -#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) -#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) -#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) -#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) -#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) -#define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER) - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc) -# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73) -# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf) -# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3) -#else -# define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc) -# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073) -# define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df) -# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3) -#endif - -/* SCFCR */ -#define SCFCR_RFRST 0x0002 -#define SCFCR_TFRST 0x0004 -#define SCFCR_TCRST 0x4000 -#define SCFCR_MCE 0x0008 - -#define SCI_MAJOR 204 -#define SCI_MINOR_START 8 - -/* Generic serial flags */ -#define SCI_RX_THROTTLE 0x0000001 - -#define SCI_MAGIC 0xbabeface - -/* - * Events are used to schedule things to happen at timer-interrupt - * time, instead of at rs interrupt time. - */ -#define SCI_EVENT_WRITE_WAKEUP 0 - -#define SCI_IN(size, offset) \ - if ((size) == 8) { \ - return ioread8(port->membase + (offset)); \ - } else { \ - return ioread16(port->membase + (offset)); \ - } -#define SCI_OUT(size, offset, value) \ - if ((size) == 8) { \ - iowrite8(value, port->membase + (offset)); \ - } else if ((size) == 16) { \ - iowrite16(value, port->membase + (offset)); \ - } - -#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\ - static inline unsigned int sci_##name##_in(struct uart_port *port) \ - { \ - if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \ - SCI_IN(scif_size, scif_offset) \ - } else { /* PORT_SCI or PORT_SCIFA */ \ - SCI_IN(sci_size, sci_offset); \ - } \ - } \ - static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ - { \ - if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \ - SCI_OUT(scif_size, scif_offset, value) \ - } else { /* PORT_SCI or PORT_SCIFA */ \ - SCI_OUT(sci_size, sci_offset, value); \ - } \ - } - -#ifdef CONFIG_H8300 -/* h8300 don't have SCIF */ -#define CPU_SCIF_FNS(name) \ - static inline unsigned int sci_##name##_in(struct uart_port *port) \ - { \ - return 0; \ - } \ - static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ - { \ - } -#else -#define CPU_SCIF_FNS(name, scif_offset, scif_size) \ - static inline unsigned int sci_##name##_in(struct uart_port *port) \ - { \ - SCI_IN(scif_size, scif_offset); \ - } \ - static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ - { \ - SCI_OUT(scif_size, scif_offset, value); \ - } -#endif - -#define CPU_SCI_FNS(name, sci_offset, sci_size) \ - static inline unsigned int sci_##name##_in(struct uart_port* port) \ - { \ - SCI_IN(sci_size, sci_offset); \ - } \ - static inline void sci_##name##_out(struct uart_port* port, unsigned int value) \ - { \ - SCI_OUT(sci_size, sci_offset, value); \ - } - -#if defined(CONFIG_CPU_SH3) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) -#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ - h8_sci_offset, h8_sci_size) \ - CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) -#define SCIF_FNS(name, scif_offset, scif_size) \ - CPU_SCIF_FNS(name, scif_offset, scif_size) -#elif defined(CONFIG_ARCH_SH7372) -#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) \ - CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) -#define SCIF_FNS(name, scif_offset, scif_size) \ - CPU_SCIF_FNS(name, scif_offset, scif_size) -#else -#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ - h8_sci_offset, h8_sci_size) \ - CPU_SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh3_scif_offset, sh3_scif_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name, sh3_scif_offset, sh3_scif_size) -#endif -#elif defined(__H8300H__) || defined(__H8300S__) -#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ - h8_sci_offset, h8_sci_size) \ - CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ - defined(CONFIG_CPU_SUBTYPE_SH7724) - #define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) - #define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) -#else -#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ - h8_sci_offset, h8_sci_size) \ - CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) - -SCIF_FNS(SCSMR, 0x00, 16) -SCIF_FNS(SCBRR, 0x04, 8) -SCIF_FNS(SCSCR, 0x08, 16) -SCIF_FNS(SCTDSR, 0x0c, 8) -SCIF_FNS(SCFER, 0x10, 16) -SCIF_FNS(SCxSR, 0x14, 16) -SCIF_FNS(SCFCR, 0x18, 16) -SCIF_FNS(SCFDR, 0x1c, 16) -SCIF_FNS(SCxTDR, 0x20, 8) -SCIF_FNS(SCxRDR, 0x24, 8) -SCIF_FNS(SCLSR, 0x00, 0) -#elif defined(CONFIG_ARCH_SH7372) -SCIF_FNS(SCSMR, 0x00, 16) -SCIF_FNS(SCBRR, 0x04, 8) -SCIF_FNS(SCSCR, 0x08, 16) -SCIF_FNS(SCTDSR, 0x0c, 16) -SCIF_FNS(SCFER, 0x10, 16) -SCIF_FNS(SCxSR, 0x14, 16) -SCIF_FNS(SCFCR, 0x18, 16) -SCIF_FNS(SCFDR, 0x1c, 16) -SCIF_FNS(SCTFDR, 0x38, 16) -SCIF_FNS(SCRFDR, 0x3c, 16) -SCIx_FNS(SCxTDR, 0x20, 8, 0x40, 8) -SCIx_FNS(SCxRDR, 0x24, 8, 0x60, 8) -SCIF_FNS(SCLSR, 0x00, 0) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ - defined(CONFIG_CPU_SUBTYPE_SH7724) -SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16) -SCIx_FNS(SCBRR, 0x04, 8, 0x04, 8) -SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16) -SCIx_FNS(SCxTDR, 0x20, 8, 0x0c, 8) -SCIx_FNS(SCxSR, 0x14, 16, 0x10, 16) -SCIx_FNS(SCxRDR, 0x24, 8, 0x14, 8) -SCIx_FNS(SCSPTR, 0, 0, 0, 0) -SCIF_FNS(SCTDSR, 0x0c, 8) -SCIF_FNS(SCFER, 0x10, 16) -SCIF_FNS(SCFCR, 0x18, 16) -SCIF_FNS(SCFDR, 0x1c, 16) -SCIF_FNS(SCLSR, 0x24, 16) -#else -/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/ -/* name off sz off sz off sz off sz off sz*/ -SCIx_FNS(SCSMR, 0x00, 8, 0x00, 8, 0x00, 8, 0x00, 16, 0x00, 8) -SCIx_FNS(SCBRR, 0x02, 8, 0x04, 8, 0x02, 8, 0x04, 8, 0x01, 8) -SCIx_FNS(SCSCR, 0x04, 8, 0x08, 8, 0x04, 8, 0x08, 16, 0x02, 8) -SCIx_FNS(SCxTDR, 0x06, 8, 0x0c, 8, 0x06, 8, 0x0C, 8, 0x03, 8) -SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8) -SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8) -SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) -#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) -SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) -SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) -SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) -SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) -SCIF_FNS(SCLSR, 0, 0, 0x28, 16) -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -SCIF_FNS(SCFDR, 0, 0, 0x1C, 16) -SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16) -SCIF_FNS(SCLSR2, 0, 0, 0x24, 16) -SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) -SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) -SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) -SCIF_FNS(SCLSR, 0, 0, 0x28, 16) -#else -SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) -#if defined(CONFIG_CPU_SUBTYPE_SH7722) -SCIF_FNS(SCSPTR, 0, 0, 0, 0) -#else -SCIF_FNS(SCSPTR, 0, 0, 0x20, 16) -#endif -SCIF_FNS(SCLSR, 0, 0, 0x24, 16) -#endif -#endif -#define sci_in(port, reg) sci_##reg##_in(port) -#define sci_out(port, reg, value) sci_##reg##_out(port, value) - -/* H8/300 series SCI pins assignment */ -#if defined(__H8300H__) || defined(__H8300S__) -static const struct __attribute__((packed)) { - int port; /* GPIO port no */ - unsigned short rx,tx; /* GPIO bit no */ -} h8300_sci_pins[] = { -#if defined(CONFIG_H83007) || defined(CONFIG_H83068) - { /* SCI0 */ - .port = H8300_GPIO_P9, - .rx = H8300_GPIO_B2, - .tx = H8300_GPIO_B0, - }, - { /* SCI1 */ - .port = H8300_GPIO_P9, - .rx = H8300_GPIO_B3, - .tx = H8300_GPIO_B1, - }, - { /* SCI2 */ - .port = H8300_GPIO_PB, - .rx = H8300_GPIO_B7, - .tx = H8300_GPIO_B6, - } -#elif defined(CONFIG_H8S2678) - { /* SCI0 */ - .port = H8300_GPIO_P3, - .rx = H8300_GPIO_B2, - .tx = H8300_GPIO_B0, - }, - { /* SCI1 */ - .port = H8300_GPIO_P3, - .rx = H8300_GPIO_B3, - .tx = H8300_GPIO_B1, - }, - { /* SCI2 */ - .port = H8300_GPIO_P5, - .rx = H8300_GPIO_B1, - .tx = H8300_GPIO_B0, - } -#endif -}; -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7708) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xfffffe80) - return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */ - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000) - return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ - return 1; -} -#elif defined(__H8300H__) || defined(__H8300S__) -static inline int sci_rxd_in(struct uart_port *port) -{ - int ch = (port->mapbase - SMR0) >> 3; - return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0; -} -#else /* default case for non-SCI processors */ -static inline int sci_rxd_in(struct uart_port *port) -{ - return 1; -} -#endif - -/* - * Values for the BitRate Register (SCBRR) - * - * The values are actually divisors for a frequency which can - * be internal to the SH3 (14.7456MHz) or derived from an external - * clock source. This driver assumes the internal clock is used; - * to support using an external clock source, config options or - * possibly command-line options would need to be added. - * - * Also, to support speeds below 2400 (why?) the lower 2 bits of - * the SCSMR register would also need to be set to non-zero values. - * - * -- Greg Banks 27Feb2000 - * - * Answer: The SCBRR register is only eight bits, and the value in - * it gets larger with lower baud rates. At around 2400 (depending on - * the peripherial module clock) you run out of bits. However the - * lower two bits of SCSMR allow the module clock to be divided down, - * scaling the value which is needed in SCBRR. - * - * -- Stuart Menefy - 23 May 2000 - * - * I meant, why would anyone bother with bitrates below 2400. - * - * -- Greg Banks - 7Jul2000 - * - * You "speedist"! How will I use my 110bps ASR-33 teletype with paper - * tape reader as a console! - * - * -- Mitch Davis - 15 Jul 2000 - */ - -#if (defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786)) && \ - !defined(CONFIG_SH_SH2007) -#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ - defined(CONFIG_CPU_SUBTYPE_SH7724) -static inline int scbrr_calc(struct uart_port *port, int bps, int clk) -{ - if (port->type == PORT_SCIF) - return (clk+16*bps)/(32*bps)-1; - else - return ((clk*2)+16*bps)/(16*bps)-1; -} -#define SCBRR_VALUE(bps, clk) scbrr_calc(port, bps, clk) -#elif defined(__H8300H__) || defined(__H8300S__) -#define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1) -#else /* Generic SH */ -#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) -#endif diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c deleted file mode 100644 index cff9a306660f..000000000000 --- a/drivers/serial/sn_console.c +++ /dev/null @@ -1,1085 +0,0 @@ -/* - * C-Brick Serial Port (and console) driver for SGI Altix machines. - * - * This driver is NOT suitable for talking to the l1-controller for - * anything other than 'console activities' --- please use the l1 - * driver for that. - * - * - * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Contact information: Silicon Graphics, Inc., 1500 Crittenden Lane, - * Mountain View, CA 94043, or: - * - * http://www.sgi.com - * - * For further information regarding this notice, see: - * - * http://oss.sgi.com/projects/GenInfo/NoticeExplan - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include /* for mdelay */ -#include -#include - -#include -#include -#include - -/* number of characters we can transmit to the SAL console at a time */ -#define SN_SAL_MAX_CHARS 120 - -/* 64K, when we're asynch, it must be at least printk's LOG_BUF_LEN to - * avoid losing chars, (always has to be a power of 2) */ -#define SN_SAL_BUFFER_SIZE (64 * (1 << 10)) - -#define SN_SAL_UART_FIFO_DEPTH 16 -#define SN_SAL_UART_FIFO_SPEED_CPS (9600/10) - -/* sn_transmit_chars() calling args */ -#define TRANSMIT_BUFFERED 0 -#define TRANSMIT_RAW 1 - -/* To use dynamic numbers only and not use the assigned major and minor, - * define the following.. */ - /* #define USE_DYNAMIC_MINOR 1 *//* use dynamic minor number */ -#define USE_DYNAMIC_MINOR 0 /* Don't rely on misc_register dynamic minor */ - -/* Device name we're using */ -#define DEVICE_NAME "ttySG" -#define DEVICE_NAME_DYNAMIC "ttySG0" /* need full name for misc_register */ -/* The major/minor we are using, ignored for USE_DYNAMIC_MINOR */ -#define DEVICE_MAJOR 204 -#define DEVICE_MINOR 40 - -#ifdef CONFIG_MAGIC_SYSRQ -static char sysrq_serial_str[] = "\eSYS"; -static char *sysrq_serial_ptr = sysrq_serial_str; -static unsigned long sysrq_requested; -#endif /* CONFIG_MAGIC_SYSRQ */ - -/* - * Port definition - this kinda drives it all - */ -struct sn_cons_port { - struct timer_list sc_timer; - struct uart_port sc_port; - struct sn_sal_ops { - int (*sal_puts_raw) (const char *s, int len); - int (*sal_puts) (const char *s, int len); - int (*sal_getc) (void); - int (*sal_input_pending) (void); - void (*sal_wakeup_transmit) (struct sn_cons_port *, int); - } *sc_ops; - unsigned long sc_interrupt_timeout; - int sc_is_asynch; -}; - -static struct sn_cons_port sal_console_port; -static int sn_process_input; - -/* Only used if USE_DYNAMIC_MINOR is set to 1 */ -static struct miscdevice misc; /* used with misc_register for dynamic */ - -extern void early_sn_setup(void); - -#undef DEBUG -#ifdef DEBUG -static int sn_debug_printf(const char *fmt, ...); -#define DPRINTF(x...) sn_debug_printf(x) -#else -#define DPRINTF(x...) do { } while (0) -#endif - -/* Prototypes */ -static int snt_hw_puts_raw(const char *, int); -static int snt_hw_puts_buffered(const char *, int); -static int snt_poll_getc(void); -static int snt_poll_input_pending(void); -static int snt_intr_getc(void); -static int snt_intr_input_pending(void); -static void sn_transmit_chars(struct sn_cons_port *, int); - -/* A table for polling: - */ -static struct sn_sal_ops poll_ops = { - .sal_puts_raw = snt_hw_puts_raw, - .sal_puts = snt_hw_puts_raw, - .sal_getc = snt_poll_getc, - .sal_input_pending = snt_poll_input_pending -}; - -/* A table for interrupts enabled */ -static struct sn_sal_ops intr_ops = { - .sal_puts_raw = snt_hw_puts_raw, - .sal_puts = snt_hw_puts_buffered, - .sal_getc = snt_intr_getc, - .sal_input_pending = snt_intr_input_pending, - .sal_wakeup_transmit = sn_transmit_chars -}; - -/* the console does output in two distinctly different ways: - * synchronous (raw) and asynchronous (buffered). initally, early_printk - * does synchronous output. any data written goes directly to the SAL - * to be output (incidentally, it is internally buffered by the SAL) - * after interrupts and timers are initialized and available for use, - * the console init code switches to asynchronous output. this is - * also the earliest opportunity to begin polling for console input. - * after console initialization, console output and tty (serial port) - * output is buffered and sent to the SAL asynchronously (either by - * timer callback or by UART interrupt) */ - -/* routines for running the console in polling mode */ - -/** - * snt_poll_getc - Get a character from the console in polling mode - * - */ -static int snt_poll_getc(void) -{ - int ch; - - ia64_sn_console_getc(&ch); - return ch; -} - -/** - * snt_poll_input_pending - Check if any input is waiting - polling mode. - * - */ -static int snt_poll_input_pending(void) -{ - int status, input; - - status = ia64_sn_console_check(&input); - return !status && input; -} - -/* routines for an interrupt driven console (normal) */ - -/** - * snt_intr_getc - Get a character from the console, interrupt mode - * - */ -static int snt_intr_getc(void) -{ - return ia64_sn_console_readc(); -} - -/** - * snt_intr_input_pending - Check if input is pending, interrupt mode - * - */ -static int snt_intr_input_pending(void) -{ - return ia64_sn_console_intr_status() & SAL_CONSOLE_INTR_RECV; -} - -/* these functions are polled and interrupt */ - -/** - * snt_hw_puts_raw - Send raw string to the console, polled or interrupt mode - * @s: String - * @len: Length - * - */ -static int snt_hw_puts_raw(const char *s, int len) -{ - /* this will call the PROM and not return until this is done */ - return ia64_sn_console_putb(s, len); -} - -/** - * snt_hw_puts_buffered - Send string to console, polled or interrupt mode - * @s: String - * @len: Length - * - */ -static int snt_hw_puts_buffered(const char *s, int len) -{ - /* queue data to the PROM */ - return ia64_sn_console_xmit_chars((char *)s, len); -} - -/* uart interface structs - * These functions are associated with the uart_port that the serial core - * infrastructure calls. - * - * Note: Due to how the console works, many routines are no-ops. - */ - -/** - * snp_type - What type of console are we? - * @port: Port to operate with (we ignore since we only have one port) - * - */ -static const char *snp_type(struct uart_port *port) -{ - return ("SGI SN L1"); -} - -/** - * snp_tx_empty - Is the transmitter empty? We pretend we're always empty - * @port: Port to operate on (we ignore since we only have one port) - * - */ -static unsigned int snp_tx_empty(struct uart_port *port) -{ - return 1; -} - -/** - * snp_stop_tx - stop the transmitter - no-op for us - * @port: Port to operat eon - we ignore - no-op function - * - */ -static void snp_stop_tx(struct uart_port *port) -{ -} - -/** - * snp_release_port - Free i/o and resources for port - no-op for us - * @port: Port to operate on - we ignore - no-op function - * - */ -static void snp_release_port(struct uart_port *port) -{ -} - -/** - * snp_enable_ms - Force modem status interrupts on - no-op for us - * @port: Port to operate on - we ignore - no-op function - * - */ -static void snp_enable_ms(struct uart_port *port) -{ -} - -/** - * snp_shutdown - shut down the port - free irq and disable - no-op for us - * @port: Port to shut down - we ignore - * - */ -static void snp_shutdown(struct uart_port *port) -{ -} - -/** - * snp_set_mctrl - set control lines (dtr, rts, etc) - no-op for our console - * @port: Port to operate on - we ignore - * @mctrl: Lines to set/unset - we ignore - * - */ -static void snp_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -/** - * snp_get_mctrl - get contorl line info, we just return a static value - * @port: port to operate on - we only have one port so we ignore this - * - */ -static unsigned int snp_get_mctrl(struct uart_port *port) -{ - return TIOCM_CAR | TIOCM_RNG | TIOCM_DSR | TIOCM_CTS; -} - -/** - * snp_stop_rx - Stop the receiver - we ignor ethis - * @port: Port to operate on - we ignore - * - */ -static void snp_stop_rx(struct uart_port *port) -{ -} - -/** - * snp_start_tx - Start transmitter - * @port: Port to operate on - * - */ -static void snp_start_tx(struct uart_port *port) -{ - if (sal_console_port.sc_ops->sal_wakeup_transmit) - sal_console_port.sc_ops->sal_wakeup_transmit(&sal_console_port, - TRANSMIT_BUFFERED); - -} - -/** - * snp_break_ctl - handle breaks - ignored by us - * @port: Port to operate on - * @break_state: Break state - * - */ -static void snp_break_ctl(struct uart_port *port, int break_state) -{ -} - -/** - * snp_startup - Start up the serial port - always return 0 (We're always on) - * @port: Port to operate on - * - */ -static int snp_startup(struct uart_port *port) -{ - return 0; -} - -/** - * snp_set_termios - set termios stuff - we ignore these - * @port: port to operate on - * @termios: New settings - * @termios: Old - * - */ -static void -snp_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ -} - -/** - * snp_request_port - allocate resources for port - ignored by us - * @port: port to operate on - * - */ -static int snp_request_port(struct uart_port *port) -{ - return 0; -} - -/** - * snp_config_port - allocate resources, set up - we ignore, we're always on - * @port: Port to operate on - * @flags: flags used for port setup - * - */ -static void snp_config_port(struct uart_port *port, int flags) -{ -} - -/* Associate the uart functions above - given to serial core */ - -static struct uart_ops sn_console_ops = { - .tx_empty = snp_tx_empty, - .set_mctrl = snp_set_mctrl, - .get_mctrl = snp_get_mctrl, - .stop_tx = snp_stop_tx, - .start_tx = snp_start_tx, - .stop_rx = snp_stop_rx, - .enable_ms = snp_enable_ms, - .break_ctl = snp_break_ctl, - .startup = snp_startup, - .shutdown = snp_shutdown, - .set_termios = snp_set_termios, - .pm = NULL, - .type = snp_type, - .release_port = snp_release_port, - .request_port = snp_request_port, - .config_port = snp_config_port, - .verify_port = NULL, -}; - -/* End of uart struct functions and defines */ - -#ifdef DEBUG - -/** - * sn_debug_printf - close to hardware debugging printf - * @fmt: printf format - * - * This is as "close to the metal" as we can get, used when the driver - * itself may be broken. - * - */ -static int sn_debug_printf(const char *fmt, ...) -{ - static char printk_buf[1024]; - int printed_len; - va_list args; - - va_start(args, fmt); - printed_len = vsnprintf(printk_buf, sizeof(printk_buf), fmt, args); - - if (!sal_console_port.sc_ops) { - sal_console_port.sc_ops = &poll_ops; - early_sn_setup(); - } - sal_console_port.sc_ops->sal_puts_raw(printk_buf, printed_len); - - va_end(args); - return printed_len; -} -#endif /* DEBUG */ - -/* - * Interrupt handling routines. - */ - -/** - * sn_receive_chars - Grab characters, pass them to tty layer - * @port: Port to operate on - * @flags: irq flags - * - * Note: If we're not registered with the serial core infrastructure yet, - * we don't try to send characters to it... - * - */ -static void -sn_receive_chars(struct sn_cons_port *port, unsigned long flags) -{ - int ch; - struct tty_struct *tty; - - if (!port) { - printk(KERN_ERR "sn_receive_chars - port NULL so can't receieve\n"); - return; - } - - if (!port->sc_ops) { - printk(KERN_ERR "sn_receive_chars - port->sc_ops NULL so can't receieve\n"); - return; - } - - if (port->sc_port.state) { - /* The serial_core stuffs are initialized, use them */ - tty = port->sc_port.state->port.tty; - } - else { - /* Not registered yet - can't pass to tty layer. */ - tty = NULL; - } - - while (port->sc_ops->sal_input_pending()) { - ch = port->sc_ops->sal_getc(); - if (ch < 0) { - printk(KERN_ERR "sn_console: An error occured while " - "obtaining data from the console (0x%0x)\n", ch); - break; - } -#ifdef CONFIG_MAGIC_SYSRQ - if (sysrq_requested) { - unsigned long sysrq_timeout = sysrq_requested + HZ*5; - - sysrq_requested = 0; - if (ch && time_before(jiffies, sysrq_timeout)) { - spin_unlock_irqrestore(&port->sc_port.lock, flags); - handle_sysrq(ch); - spin_lock_irqsave(&port->sc_port.lock, flags); - /* ignore actual sysrq command char */ - continue; - } - } - if (ch == *sysrq_serial_ptr) { - if (!(*++sysrq_serial_ptr)) { - sysrq_requested = jiffies; - sysrq_serial_ptr = sysrq_serial_str; - } - /* - * ignore the whole sysrq string except for the - * leading escape - */ - if (ch != '\e') - continue; - } - else - sysrq_serial_ptr = sysrq_serial_str; -#endif /* CONFIG_MAGIC_SYSRQ */ - - /* record the character to pass up to the tty layer */ - if (tty) { - if(tty_insert_flip_char(tty, ch, TTY_NORMAL) == 0) - break; - } - port->sc_port.icount.rx++; - } - - if (tty) - tty_flip_buffer_push(tty); -} - -/** - * sn_transmit_chars - grab characters from serial core, send off - * @port: Port to operate on - * @raw: Transmit raw or buffered - * - * Note: If we're early, before we're registered with serial core, the - * writes are going through sn_sal_console_write because that's how - * register_console has been set up. We currently could have asynch - * polls calling this function due to sn_sal_switch_to_asynch but we can - * ignore them until we register with the serial core stuffs. - * - */ -static void sn_transmit_chars(struct sn_cons_port *port, int raw) -{ - int xmit_count, tail, head, loops, ii; - int result; - char *start; - struct circ_buf *xmit; - - if (!port) - return; - - BUG_ON(!port->sc_is_asynch); - - if (port->sc_port.state) { - /* We're initialized, using serial core infrastructure */ - xmit = &port->sc_port.state->xmit; - } else { - /* Probably sn_sal_switch_to_asynch has been run but serial core isn't - * initialized yet. Just return. Writes are going through - * sn_sal_console_write (due to register_console) at this time. - */ - return; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(&port->sc_port)) { - /* Nothing to do. */ - ia64_sn_console_intr_disable(SAL_CONSOLE_INTR_XMIT); - return; - } - - head = xmit->head; - tail = xmit->tail; - start = &xmit->buf[tail]; - - /* twice around gets the tail to the end of the buffer and - * then to the head, if needed */ - loops = (head < tail) ? 2 : 1; - - for (ii = 0; ii < loops; ii++) { - xmit_count = (head < tail) ? - (UART_XMIT_SIZE - tail) : (head - tail); - - if (xmit_count > 0) { - if (raw == TRANSMIT_RAW) - result = - port->sc_ops->sal_puts_raw(start, - xmit_count); - else - result = - port->sc_ops->sal_puts(start, xmit_count); -#ifdef DEBUG - if (!result) - DPRINTF("`"); -#endif - if (result > 0) { - xmit_count -= result; - port->sc_port.icount.tx += result; - tail += result; - tail &= UART_XMIT_SIZE - 1; - xmit->tail = tail; - start = &xmit->buf[tail]; - } - } - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&port->sc_port); - - if (uart_circ_empty(xmit)) - snp_stop_tx(&port->sc_port); /* no-op for us */ -} - -/** - * sn_sal_interrupt - Handle console interrupts - * @irq: irq #, useful for debug statements - * @dev_id: our pointer to our port (sn_cons_port which contains the uart port) - * - */ -static irqreturn_t sn_sal_interrupt(int irq, void *dev_id) -{ - struct sn_cons_port *port = (struct sn_cons_port *)dev_id; - unsigned long flags; - int status = ia64_sn_console_intr_status(); - - if (!port) - return IRQ_NONE; - - spin_lock_irqsave(&port->sc_port.lock, flags); - if (status & SAL_CONSOLE_INTR_RECV) { - sn_receive_chars(port, flags); - } - if (status & SAL_CONSOLE_INTR_XMIT) { - sn_transmit_chars(port, TRANSMIT_BUFFERED); - } - spin_unlock_irqrestore(&port->sc_port.lock, flags); - return IRQ_HANDLED; -} - -/** - * sn_sal_timer_poll - this function handles polled console mode - * @data: A pointer to our sn_cons_port (which contains the uart port) - * - * data is the pointer that init_timer will store for us. This function is - * associated with init_timer to see if there is any console traffic. - * Obviously not used in interrupt mode - * - */ -static void sn_sal_timer_poll(unsigned long data) -{ - struct sn_cons_port *port = (struct sn_cons_port *)data; - unsigned long flags; - - if (!port) - return; - - if (!port->sc_port.irq) { - spin_lock_irqsave(&port->sc_port.lock, flags); - if (sn_process_input) - sn_receive_chars(port, flags); - sn_transmit_chars(port, TRANSMIT_RAW); - spin_unlock_irqrestore(&port->sc_port.lock, flags); - mod_timer(&port->sc_timer, - jiffies + port->sc_interrupt_timeout); - } -} - -/* - * Boot-time initialization code - */ - -/** - * sn_sal_switch_to_asynch - Switch to async mode (as opposed to synch) - * @port: Our sn_cons_port (which contains the uart port) - * - * So this is used by sn_sal_serial_console_init (early on, before we're - * registered with serial core). It's also used by sn_sal_module_init - * right after we've registered with serial core. The later only happens - * if we didn't already come through here via sn_sal_serial_console_init. - * - */ -static void __init sn_sal_switch_to_asynch(struct sn_cons_port *port) -{ - unsigned long flags; - - if (!port) - return; - - DPRINTF("sn_console: about to switch to asynchronous console\n"); - - /* without early_printk, we may be invoked late enough to race - * with other cpus doing console IO at this point, however - * console interrupts will never be enabled */ - spin_lock_irqsave(&port->sc_port.lock, flags); - - /* early_printk invocation may have done this for us */ - if (!port->sc_ops) - port->sc_ops = &poll_ops; - - /* we can't turn on the console interrupt (as request_irq - * calls kmalloc, which isn't set up yet), so we rely on a - * timer to poll for input and push data from the console - * buffer. - */ - init_timer(&port->sc_timer); - port->sc_timer.function = sn_sal_timer_poll; - port->sc_timer.data = (unsigned long)port; - - if (IS_RUNNING_ON_SIMULATOR()) - port->sc_interrupt_timeout = 6; - else { - /* 960cps / 16 char FIFO = 60HZ - * HZ / (SN_SAL_FIFO_SPEED_CPS / SN_SAL_FIFO_DEPTH) */ - port->sc_interrupt_timeout = - HZ * SN_SAL_UART_FIFO_DEPTH / SN_SAL_UART_FIFO_SPEED_CPS; - } - mod_timer(&port->sc_timer, jiffies + port->sc_interrupt_timeout); - - port->sc_is_asynch = 1; - spin_unlock_irqrestore(&port->sc_port.lock, flags); -} - -/** - * sn_sal_switch_to_interrupts - Switch to interrupt driven mode - * @port: Our sn_cons_port (which contains the uart port) - * - * In sn_sal_module_init, after we're registered with serial core and - * the port is added, this function is called to switch us to interrupt - * mode. We were previously in asynch/polling mode (using init_timer). - * - * We attempt to switch to interrupt mode here by calling - * request_irq. If that works out, we enable receive interrupts. - */ -static void __init sn_sal_switch_to_interrupts(struct sn_cons_port *port) -{ - unsigned long flags; - - if (port) { - DPRINTF("sn_console: switching to interrupt driven console\n"); - - if (request_irq(SGI_UART_VECTOR, sn_sal_interrupt, - IRQF_DISABLED | IRQF_SHARED, - "SAL console driver", port) >= 0) { - spin_lock_irqsave(&port->sc_port.lock, flags); - port->sc_port.irq = SGI_UART_VECTOR; - port->sc_ops = &intr_ops; - - /* turn on receive interrupts */ - ia64_sn_console_intr_enable(SAL_CONSOLE_INTR_RECV); - spin_unlock_irqrestore(&port->sc_port.lock, flags); - } - else { - printk(KERN_INFO - "sn_console: console proceeding in polled mode\n"); - } - } -} - -/* - * Kernel console definitions - */ - -static void sn_sal_console_write(struct console *, const char *, unsigned); -static int sn_sal_console_setup(struct console *, char *); -static struct uart_driver sal_console_uart; -extern struct tty_driver *uart_console_device(struct console *, int *); - -static struct console sal_console = { - .name = DEVICE_NAME, - .write = sn_sal_console_write, - .device = uart_console_device, - .setup = sn_sal_console_setup, - .index = -1, /* unspecified */ - .data = &sal_console_uart, -}; - -#define SAL_CONSOLE &sal_console - -static struct uart_driver sal_console_uart = { - .owner = THIS_MODULE, - .driver_name = "sn_console", - .dev_name = DEVICE_NAME, - .major = 0, /* major/minor set at registration time per USE_DYNAMIC_MINOR */ - .minor = 0, - .nr = 1, /* one port */ - .cons = SAL_CONSOLE, -}; - -/** - * sn_sal_module_init - When the kernel loads us, get us rolling w/ serial core - * - * Before this is called, we've been printing kernel messages in a special - * early mode not making use of the serial core infrastructure. When our - * driver is loaded for real, we register the driver and port with serial - * core and try to enable interrupt driven mode. - * - */ -static int __init sn_sal_module_init(void) -{ - int retval; - - if (!ia64_platform_is("sn2")) - return 0; - - printk(KERN_INFO "sn_console: Console driver init\n"); - - if (USE_DYNAMIC_MINOR == 1) { - misc.minor = MISC_DYNAMIC_MINOR; - misc.name = DEVICE_NAME_DYNAMIC; - retval = misc_register(&misc); - if (retval != 0) { - printk(KERN_WARNING "Failed to register console " - "device using misc_register.\n"); - return -ENODEV; - } - sal_console_uart.major = MISC_MAJOR; - sal_console_uart.minor = misc.minor; - } else { - sal_console_uart.major = DEVICE_MAJOR; - sal_console_uart.minor = DEVICE_MINOR; - } - - /* We register the driver and the port before switching to interrupts - * or async above so the proper uart structures are populated */ - - if (uart_register_driver(&sal_console_uart) < 0) { - printk - ("ERROR sn_sal_module_init failed uart_register_driver, line %d\n", - __LINE__); - return -ENODEV; - } - - spin_lock_init(&sal_console_port.sc_port.lock); - - /* Setup the port struct with the minimum needed */ - sal_console_port.sc_port.membase = (char *)1; /* just needs to be non-zero */ - sal_console_port.sc_port.type = PORT_16550A; - sal_console_port.sc_port.fifosize = SN_SAL_MAX_CHARS; - sal_console_port.sc_port.ops = &sn_console_ops; - sal_console_port.sc_port.line = 0; - - if (uart_add_one_port(&sal_console_uart, &sal_console_port.sc_port) < 0) { - /* error - not sure what I'd do - so I'll do nothing */ - printk(KERN_ERR "%s: unable to add port\n", __func__); - } - - /* when this driver is compiled in, the console initialization - * will have already switched us into asynchronous operation - * before we get here through the module initcalls */ - if (!sal_console_port.sc_is_asynch) { - sn_sal_switch_to_asynch(&sal_console_port); - } - - /* at this point (module_init) we can try to turn on interrupts */ - if (!IS_RUNNING_ON_SIMULATOR()) { - sn_sal_switch_to_interrupts(&sal_console_port); - } - sn_process_input = 1; - return 0; -} - -/** - * sn_sal_module_exit - When we're unloaded, remove the driver/port - * - */ -static void __exit sn_sal_module_exit(void) -{ - del_timer_sync(&sal_console_port.sc_timer); - uart_remove_one_port(&sal_console_uart, &sal_console_port.sc_port); - uart_unregister_driver(&sal_console_uart); - misc_deregister(&misc); -} - -module_init(sn_sal_module_init); -module_exit(sn_sal_module_exit); - -/** - * puts_raw_fixed - sn_sal_console_write helper for adding \r's as required - * @puts_raw : puts function to do the writing - * @s: input string - * @count: length - * - * We need a \r ahead of every \n for direct writes through - * ia64_sn_console_putb (what sal_puts_raw below actually does). - * - */ - -static void puts_raw_fixed(int (*puts_raw) (const char *s, int len), - const char *s, int count) -{ - const char *s1; - - /* Output '\r' before each '\n' */ - while ((s1 = memchr(s, '\n', count)) != NULL) { - puts_raw(s, s1 - s); - puts_raw("\r\n", 2); - count -= s1 + 1 - s; - s = s1 + 1; - } - puts_raw(s, count); -} - -/** - * sn_sal_console_write - Print statements before serial core available - * @console: Console to operate on - we ignore since we have just one - * @s: String to send - * @count: length - * - * This is referenced in the console struct. It is used for early - * console printing before we register with serial core and for things - * such as kdb. The console_lock must be held when we get here. - * - * This function has some code for trying to print output even if the lock - * is held. We try to cover the case where a lock holder could have died. - * We don't use this special case code if we're not registered with serial - * core yet. After we're registered with serial core, the only time this - * function would be used is for high level kernel output like magic sys req, - * kdb, and printk's. - */ -static void -sn_sal_console_write(struct console *co, const char *s, unsigned count) -{ - unsigned long flags = 0; - struct sn_cons_port *port = &sal_console_port; - static int stole_lock = 0; - - BUG_ON(!port->sc_is_asynch); - - /* We can't look at the xmit buffer if we're not registered with serial core - * yet. So only do the fancy recovery after registering - */ - if (!port->sc_port.state) { - /* Not yet registered with serial core - simple case */ - puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count); - return; - } - - /* somebody really wants this output, might be an - * oops, kdb, panic, etc. make sure they get it. */ - if (spin_is_locked(&port->sc_port.lock)) { - int lhead = port->sc_port.state->xmit.head; - int ltail = port->sc_port.state->xmit.tail; - int counter, got_lock = 0; - - /* - * We attempt to determine if someone has died with the - * lock. We wait ~20 secs after the head and tail ptrs - * stop moving and assume the lock holder is not functional - * and plow ahead. If the lock is freed within the time out - * period we re-get the lock and go ahead normally. We also - * remember if we have plowed ahead so that we don't have - * to wait out the time out period again - the asumption - * is that we will time out again. - */ - - for (counter = 0; counter < 150; mdelay(125), counter++) { - if (!spin_is_locked(&port->sc_port.lock) - || stole_lock) { - if (!stole_lock) { - spin_lock_irqsave(&port->sc_port.lock, - flags); - got_lock = 1; - } - break; - } else { - /* still locked */ - if ((lhead != port->sc_port.state->xmit.head) - || (ltail != - port->sc_port.state->xmit.tail)) { - lhead = - port->sc_port.state->xmit.head; - ltail = - port->sc_port.state->xmit.tail; - counter = 0; - } - } - } - /* flush anything in the serial core xmit buffer, raw */ - sn_transmit_chars(port, 1); - if (got_lock) { - spin_unlock_irqrestore(&port->sc_port.lock, flags); - stole_lock = 0; - } else { - /* fell thru */ - stole_lock = 1; - } - puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count); - } else { - stole_lock = 0; - spin_lock_irqsave(&port->sc_port.lock, flags); - sn_transmit_chars(port, 1); - spin_unlock_irqrestore(&port->sc_port.lock, flags); - - puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count); - } -} - - -/** - * sn_sal_console_setup - Set up console for early printing - * @co: Console to work with - * @options: Options to set - * - * Altix console doesn't do anything with baud rates, etc, anyway. - * - * This isn't required since not providing the setup function in the - * console struct is ok. However, other patches like KDB plop something - * here so providing it is easier. - * - */ -static int sn_sal_console_setup(struct console *co, char *options) -{ - return 0; -} - -/** - * sn_sal_console_write_early - simple early output routine - * @co - console struct - * @s - string to print - * @count - count - * - * Simple function to provide early output, before even - * sn_sal_serial_console_init is called. Referenced in the - * console struct registerd in sn_serial_console_early_setup. - * - */ -static void __init -sn_sal_console_write_early(struct console *co, const char *s, unsigned count) -{ - puts_raw_fixed(sal_console_port.sc_ops->sal_puts_raw, s, count); -} - -/* Used for very early console printing - again, before - * sn_sal_serial_console_init is run */ -static struct console sal_console_early __initdata = { - .name = "sn_sal", - .write = sn_sal_console_write_early, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -/** - * sn_serial_console_early_setup - Sets up early console output support - * - * Register a console early on... This is for output before even - * sn_sal_serial_cosnole_init is called. This function is called from - * setup.c. This allows us to do really early polled writes. When - * sn_sal_serial_console_init is called, this console is unregistered - * and a new one registered. - */ -int __init sn_serial_console_early_setup(void) -{ - if (!ia64_platform_is("sn2")) - return -1; - - sal_console_port.sc_ops = &poll_ops; - spin_lock_init(&sal_console_port.sc_port.lock); - early_sn_setup(); /* Find SAL entry points */ - register_console(&sal_console_early); - - return 0; -} - -/** - * sn_sal_serial_console_init - Early console output - set up for register - * - * This function is called when regular console init happens. Because we - * support even earlier console output with sn_serial_console_early_setup - * (called from setup.c directly), this function unregisters the really - * early console. - * - * Note: Even if setup.c doesn't register sal_console_early, unregistering - * it here doesn't hurt anything. - * - */ -static int __init sn_sal_serial_console_init(void) -{ - if (ia64_platform_is("sn2")) { - sn_sal_switch_to_asynch(&sal_console_port); - DPRINTF("sn_sal_serial_console_init : register console\n"); - register_console(&sal_console); - unregister_console(&sal_console_early); - } - return 0; -} - -console_initcall(sn_sal_serial_console_init); diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c deleted file mode 100644 index 6381a0282ee7..000000000000 --- a/drivers/serial/suncore.c +++ /dev/null @@ -1,247 +0,0 @@ -/* suncore.c - * - * Common SUN serial routines. Based entirely - * upon drivers/sbus/char/sunserial.c which is: - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - * - * Adaptation to new UART layer is: - * - * Copyright (C) 2002 David S. Miller (davem@redhat.com) - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "suncore.h" - -static int sunserial_current_minor = 64; - -int sunserial_register_minors(struct uart_driver *drv, int count) -{ - int err = 0; - - drv->minor = sunserial_current_minor; - drv->nr += count; - /* Register the driver on the first call */ - if (drv->nr == count) - err = uart_register_driver(drv); - if (err == 0) { - sunserial_current_minor += count; - drv->tty_driver->name_base = drv->minor - 64; - } - return err; -} -EXPORT_SYMBOL(sunserial_register_minors); - -void sunserial_unregister_minors(struct uart_driver *drv, int count) -{ - drv->nr -= count; - sunserial_current_minor -= count; - - if (drv->nr == 0) - uart_unregister_driver(drv); -} -EXPORT_SYMBOL(sunserial_unregister_minors); - -int sunserial_console_match(struct console *con, struct device_node *dp, - struct uart_driver *drv, int line, bool ignore_line) -{ - if (!con) - return 0; - - drv->cons = con; - - if (of_console_device != dp) - return 0; - - if (!ignore_line) { - int off = 0; - - if (of_console_options && - *of_console_options == 'b') - off = 1; - - if ((line & 1) != off) - return 0; - } - - if (!console_set_on_cmdline) { - con->index = line; - add_preferred_console(con->name, line, NULL); - } - return 1; -} -EXPORT_SYMBOL(sunserial_console_match); - -void sunserial_console_termios(struct console *con, struct device_node *uart_dp) -{ - const char *mode, *s; - char mode_prop[] = "ttyX-mode"; - int baud, bits, stop, cflag; - char parity; - - if (!strcmp(uart_dp->name, "rsc") || - !strcmp(uart_dp->name, "rsc-console") || - !strcmp(uart_dp->name, "rsc-control")) { - mode = of_get_property(uart_dp, - "ssp-console-modes", NULL); - if (!mode) - mode = "115200,8,n,1,-"; - } else if (!strcmp(uart_dp->name, "lom-console")) { - mode = "9600,8,n,1,-"; - } else { - struct device_node *dp; - char c; - - c = 'a'; - if (of_console_options) - c = *of_console_options; - - mode_prop[3] = c; - - dp = of_find_node_by_path("/options"); - mode = of_get_property(dp, mode_prop, NULL); - if (!mode) - mode = "9600,8,n,1,-"; - } - - cflag = CREAD | HUPCL | CLOCAL; - - s = mode; - baud = simple_strtoul(s, NULL, 0); - s = strchr(s, ','); - bits = simple_strtoul(++s, NULL, 0); - s = strchr(s, ','); - parity = *(++s); - s = strchr(s, ','); - stop = simple_strtoul(++s, NULL, 0); - s = strchr(s, ','); - /* XXX handshake is not handled here. */ - - switch (baud) { - case 150: cflag |= B150; break; - case 300: cflag |= B300; break; - case 600: cflag |= B600; break; - case 1200: cflag |= B1200; break; - case 2400: cflag |= B2400; break; - case 4800: cflag |= B4800; break; - case 9600: cflag |= B9600; break; - case 19200: cflag |= B19200; break; - case 38400: cflag |= B38400; break; - case 57600: cflag |= B57600; break; - case 115200: cflag |= B115200; break; - case 230400: cflag |= B230400; break; - case 460800: cflag |= B460800; break; - default: baud = 9600; cflag |= B9600; break; - } - - switch (bits) { - case 5: cflag |= CS5; break; - case 6: cflag |= CS6; break; - case 7: cflag |= CS7; break; - case 8: cflag |= CS8; break; - default: cflag |= CS8; break; - } - - switch (parity) { - case 'o': cflag |= (PARENB | PARODD); break; - case 'e': cflag |= PARENB; break; - case 'n': default: break; - } - - switch (stop) { - case 2: cflag |= CSTOPB; break; - case 1: default: break; - } - - con->cflag = cflag; -} - -/* Sun serial MOUSE auto baud rate detection. */ -static struct mouse_baud_cflag { - int baud; - unsigned int cflag; -} mouse_baud_table[] = { - { 1200, B1200 }, - { 2400, B2400 }, - { 4800, B4800 }, - { 9600, B9600 }, - { -1, ~0 }, - { -1, ~0 }, -}; - -unsigned int suncore_mouse_baud_cflag_next(unsigned int cflag, int *new_baud) -{ - int i; - - for (i = 0; mouse_baud_table[i].baud != -1; i++) - if (mouse_baud_table[i].cflag == (cflag & CBAUD)) - break; - - i += 1; - if (mouse_baud_table[i].baud == -1) - i = 0; - - *new_baud = mouse_baud_table[i].baud; - return mouse_baud_table[i].cflag; -} - -EXPORT_SYMBOL(suncore_mouse_baud_cflag_next); - -/* Basically, when the baud rate is wrong the mouse spits out - * breaks to us. - */ -int suncore_mouse_baud_detection(unsigned char ch, int is_break) -{ - static int mouse_got_break = 0; - static int ctr = 0; - - if (is_break) { - /* Let a few normal bytes go by before we jump the gun - * and say we need to try another baud rate. - */ - if (mouse_got_break && ctr < 8) - return 1; - - /* Ok, we need to try another baud. */ - ctr = 0; - mouse_got_break = 1; - return 2; - } - if (mouse_got_break) { - ctr++; - if (ch == 0x87) { - /* Correct baud rate determined. */ - mouse_got_break = 0; - } - return 1; - } - return 0; -} - -EXPORT_SYMBOL(suncore_mouse_baud_detection); - -static int __init suncore_init(void) -{ - return 0; -} - -static void __exit suncore_exit(void) -{ -} - -module_init(suncore_init); -module_exit(suncore_exit); - -MODULE_AUTHOR("Eddie C. Dost, David S. Miller"); -MODULE_DESCRIPTION("Sun serial common layer"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h deleted file mode 100644 index db2057936c31..000000000000 --- a/drivers/serial/suncore.h +++ /dev/null @@ -1,33 +0,0 @@ -/* suncore.h - * - * Generic SUN serial/kbd/ms layer. Based entirely - * upon drivers/sbus/char/sunserial.h which is: - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - * - * Port to new UART layer is: - * - * Copyright (C) 2002 David S. Miller (davem@redhat.com) - */ - -#ifndef _SERIAL_SUN_H -#define _SERIAL_SUN_H - -/* Serial keyboard defines for L1-A processing... */ -#define SUNKBD_RESET 0xff -#define SUNKBD_L1 0x01 -#define SUNKBD_UP 0x80 -#define SUNKBD_A 0x4d - -extern unsigned int suncore_mouse_baud_cflag_next(unsigned int, int *); -extern int suncore_mouse_baud_detection(unsigned char, int); - -extern int sunserial_register_minors(struct uart_driver *, int); -extern void sunserial_unregister_minors(struct uart_driver *, int); - -extern int sunserial_console_match(struct console *, struct device_node *, - struct uart_driver *, int, bool); -extern void sunserial_console_termios(struct console *, - struct device_node *); - -#endif /* !(_SERIAL_SUN_H) */ diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c deleted file mode 100644 index c9014868297d..000000000000 --- a/drivers/serial/sunhv.c +++ /dev/null @@ -1,661 +0,0 @@ -/* sunhv.c: Serial driver for SUN4V hypervisor console. - * - * Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net) - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#if defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - -#include "suncore.h" - -#define CON_BREAK ((long)-1) -#define CON_HUP ((long)-2) - -#define IGNORE_BREAK 0x1 -#define IGNORE_ALL 0x2 - -static char *con_write_page; -static char *con_read_page; - -static int hung_up = 0; - -static void transmit_chars_putchar(struct uart_port *port, struct circ_buf *xmit) -{ - while (!uart_circ_empty(xmit)) { - long status = sun4v_con_putchar(xmit->buf[xmit->tail]); - - if (status != HV_EOK) - break; - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } -} - -static void transmit_chars_write(struct uart_port *port, struct circ_buf *xmit) -{ - while (!uart_circ_empty(xmit)) { - unsigned long ra = __pa(xmit->buf + xmit->tail); - unsigned long len, status, sent; - - len = CIRC_CNT_TO_END(xmit->head, xmit->tail, - UART_XMIT_SIZE); - status = sun4v_con_write(ra, len, &sent); - if (status != HV_EOK) - break; - xmit->tail = (xmit->tail + sent) & (UART_XMIT_SIZE - 1); - port->icount.tx += sent; - } -} - -static int receive_chars_getchar(struct uart_port *port, struct tty_struct *tty) -{ - int saw_console_brk = 0; - int limit = 10000; - - while (limit-- > 0) { - long status; - long c = sun4v_con_getchar(&status); - - if (status == HV_EWOULDBLOCK) - break; - - if (c == CON_BREAK) { - if (uart_handle_break(port)) - continue; - saw_console_brk = 1; - c = 0; - } - - if (c == CON_HUP) { - hung_up = 1; - uart_handle_dcd_change(port, 0); - } else if (hung_up) { - hung_up = 0; - uart_handle_dcd_change(port, 1); - } - - if (tty == NULL) { - uart_handle_sysrq_char(port, c); - continue; - } - - port->icount.rx++; - - if (uart_handle_sysrq_char(port, c)) - continue; - - tty_insert_flip_char(tty, c, TTY_NORMAL); - } - - return saw_console_brk; -} - -static int receive_chars_read(struct uart_port *port, struct tty_struct *tty) -{ - int saw_console_brk = 0; - int limit = 10000; - - while (limit-- > 0) { - unsigned long ra = __pa(con_read_page); - unsigned long bytes_read, i; - long stat = sun4v_con_read(ra, PAGE_SIZE, &bytes_read); - - if (stat != HV_EOK) { - bytes_read = 0; - - if (stat == CON_BREAK) { - if (uart_handle_break(port)) - continue; - saw_console_brk = 1; - *con_read_page = 0; - bytes_read = 1; - } else if (stat == CON_HUP) { - hung_up = 1; - uart_handle_dcd_change(port, 0); - continue; - } else { - /* HV_EWOULDBLOCK, etc. */ - break; - } - } - - if (hung_up) { - hung_up = 0; - uart_handle_dcd_change(port, 1); - } - - for (i = 0; i < bytes_read; i++) - uart_handle_sysrq_char(port, con_read_page[i]); - - if (tty == NULL) - continue; - - port->icount.rx += bytes_read; - - tty_insert_flip_string(tty, con_read_page, bytes_read); - } - - return saw_console_brk; -} - -struct sunhv_ops { - void (*transmit_chars)(struct uart_port *port, struct circ_buf *xmit); - int (*receive_chars)(struct uart_port *port, struct tty_struct *tty); -}; - -static struct sunhv_ops bychar_ops = { - .transmit_chars = transmit_chars_putchar, - .receive_chars = receive_chars_getchar, -}; - -static struct sunhv_ops bywrite_ops = { - .transmit_chars = transmit_chars_write, - .receive_chars = receive_chars_read, -}; - -static struct sunhv_ops *sunhv_ops = &bychar_ops; - -static struct tty_struct *receive_chars(struct uart_port *port) -{ - struct tty_struct *tty = NULL; - - if (port->state != NULL) /* Unopened serial console */ - tty = port->state->port.tty; - - if (sunhv_ops->receive_chars(port, tty)) - sun_do_break(); - - return tty; -} - -static void transmit_chars(struct uart_port *port) -{ - struct circ_buf *xmit; - - if (!port->state) - return; - - xmit = &port->state->xmit; - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) - return; - - sunhv_ops->transmit_chars(port, xmit); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - -static irqreturn_t sunhv_interrupt(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - struct tty_struct *tty; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - tty = receive_chars(port); - transmit_chars(port); - spin_unlock_irqrestore(&port->lock, flags); - - if (tty) - tty_flip_buffer_push(tty); - - return IRQ_HANDLED; -} - -/* port->lock is not held. */ -static unsigned int sunhv_tx_empty(struct uart_port *port) -{ - /* Transmitter is always empty for us. If the circ buffer - * is non-empty or there is an x_char pending, our caller - * will do the right thing and ignore what we return here. - */ - return TIOCSER_TEMT; -} - -/* port->lock held by caller. */ -static void sunhv_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - return; -} - -/* port->lock is held by caller and interrupts are disabled. */ -static unsigned int sunhv_get_mctrl(struct uart_port *port) -{ - return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS; -} - -/* port->lock held by caller. */ -static void sunhv_stop_tx(struct uart_port *port) -{ - return; -} - -/* port->lock held by caller. */ -static void sunhv_start_tx(struct uart_port *port) -{ - transmit_chars(port); -} - -/* port->lock is not held. */ -static void sunhv_send_xchar(struct uart_port *port, char ch) -{ - unsigned long flags; - int limit = 10000; - - spin_lock_irqsave(&port->lock, flags); - - while (limit-- > 0) { - long status = sun4v_con_putchar(ch); - if (status == HV_EOK) - break; - udelay(1); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* port->lock held by caller. */ -static void sunhv_stop_rx(struct uart_port *port) -{ -} - -/* port->lock held by caller. */ -static void sunhv_enable_ms(struct uart_port *port) -{ -} - -/* port->lock is not held. */ -static void sunhv_break_ctl(struct uart_port *port, int break_state) -{ - if (break_state) { - unsigned long flags; - int limit = 10000; - - spin_lock_irqsave(&port->lock, flags); - - while (limit-- > 0) { - long status = sun4v_con_putchar(CON_BREAK); - if (status == HV_EOK) - break; - udelay(1); - } - - spin_unlock_irqrestore(&port->lock, flags); - } -} - -/* port->lock is not held. */ -static int sunhv_startup(struct uart_port *port) -{ - return 0; -} - -/* port->lock is not held. */ -static void sunhv_shutdown(struct uart_port *port) -{ -} - -/* port->lock is not held. */ -static void sunhv_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); - unsigned int quot = uart_get_divisor(port, baud); - unsigned int iflag, cflag; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - - iflag = termios->c_iflag; - cflag = termios->c_cflag; - - port->ignore_status_mask = 0; - if (iflag & IGNBRK) - port->ignore_status_mask |= IGNORE_BREAK; - if ((cflag & CREAD) == 0) - port->ignore_status_mask |= IGNORE_ALL; - - /* XXX */ - uart_update_timeout(port, cflag, - (port->uartclk / (16 * quot))); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *sunhv_type(struct uart_port *port) -{ - return "SUN4V HCONS"; -} - -static void sunhv_release_port(struct uart_port *port) -{ -} - -static int sunhv_request_port(struct uart_port *port) -{ - return 0; -} - -static void sunhv_config_port(struct uart_port *port, int flags) -{ -} - -static int sunhv_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return -EINVAL; -} - -static struct uart_ops sunhv_pops = { - .tx_empty = sunhv_tx_empty, - .set_mctrl = sunhv_set_mctrl, - .get_mctrl = sunhv_get_mctrl, - .stop_tx = sunhv_stop_tx, - .start_tx = sunhv_start_tx, - .send_xchar = sunhv_send_xchar, - .stop_rx = sunhv_stop_rx, - .enable_ms = sunhv_enable_ms, - .break_ctl = sunhv_break_ctl, - .startup = sunhv_startup, - .shutdown = sunhv_shutdown, - .set_termios = sunhv_set_termios, - .type = sunhv_type, - .release_port = sunhv_release_port, - .request_port = sunhv_request_port, - .config_port = sunhv_config_port, - .verify_port = sunhv_verify_port, -}; - -static struct uart_driver sunhv_reg = { - .owner = THIS_MODULE, - .driver_name = "sunhv", - .dev_name = "ttyS", - .major = TTY_MAJOR, -}; - -static struct uart_port *sunhv_port; - -/* Copy 's' into the con_write_page, decoding "\n" into - * "\r\n" along the way. We have to return two lengths - * because the caller needs to know how much to advance - * 's' and also how many bytes to output via con_write_page. - */ -static int fill_con_write_page(const char *s, unsigned int n, - unsigned long *page_bytes) -{ - const char *orig_s = s; - char *p = con_write_page; - int left = PAGE_SIZE; - - while (n--) { - if (*s == '\n') { - if (left < 2) - break; - *p++ = '\r'; - left--; - } else if (left < 1) - break; - *p++ = *s++; - left--; - } - *page_bytes = p - con_write_page; - return s - orig_s; -} - -static void sunhv_console_write_paged(struct console *con, const char *s, unsigned n) -{ - struct uart_port *port = sunhv_port; - unsigned long flags; - int locked = 1; - - local_irq_save(flags); - if (port->sysrq) { - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&port->lock); - } else - spin_lock(&port->lock); - - while (n > 0) { - unsigned long ra = __pa(con_write_page); - unsigned long page_bytes; - unsigned int cpy = fill_con_write_page(s, n, - &page_bytes); - - n -= cpy; - s += cpy; - while (page_bytes > 0) { - unsigned long written; - int limit = 1000000; - - while (limit--) { - unsigned long stat; - - stat = sun4v_con_write(ra, page_bytes, - &written); - if (stat == HV_EOK) - break; - udelay(1); - } - if (limit < 0) - break; - page_bytes -= written; - ra += written; - } - } - - if (locked) - spin_unlock(&port->lock); - local_irq_restore(flags); -} - -static inline void sunhv_console_putchar(struct uart_port *port, char c) -{ - int limit = 1000000; - - while (limit-- > 0) { - long status = sun4v_con_putchar(c); - if (status == HV_EOK) - break; - udelay(1); - } -} - -static void sunhv_console_write_bychar(struct console *con, const char *s, unsigned n) -{ - struct uart_port *port = sunhv_port; - unsigned long flags; - int i, locked = 1; - - local_irq_save(flags); - if (port->sysrq) { - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&port->lock); - } else - spin_lock(&port->lock); - - for (i = 0; i < n; i++) { - if (*s == '\n') - sunhv_console_putchar(port, '\r'); - sunhv_console_putchar(port, *s++); - } - - if (locked) - spin_unlock(&port->lock); - local_irq_restore(flags); -} - -static struct console sunhv_console = { - .name = "ttyHV", - .write = sunhv_console_write_bychar, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sunhv_reg, -}; - -static int __devinit hv_probe(struct platform_device *op, const struct of_device_id *match) -{ - struct uart_port *port; - unsigned long minor; - int err; - - if (op->archdata.irqs[0] == 0xffffffff) - return -ENODEV; - - port = kzalloc(sizeof(struct uart_port), GFP_KERNEL); - if (unlikely(!port)) - return -ENOMEM; - - minor = 1; - if (sun4v_hvapi_register(HV_GRP_CORE, 1, &minor) == 0 && - minor >= 1) { - err = -ENOMEM; - con_write_page = kzalloc(PAGE_SIZE, GFP_KERNEL); - if (!con_write_page) - goto out_free_port; - - con_read_page = kzalloc(PAGE_SIZE, GFP_KERNEL); - if (!con_read_page) - goto out_free_con_write_page; - - sunhv_console.write = sunhv_console_write_paged; - sunhv_ops = &bywrite_ops; - } - - sunhv_port = port; - - port->line = 0; - port->ops = &sunhv_pops; - port->type = PORT_SUNHV; - port->uartclk = ( 29491200 / 16 ); /* arbitrary */ - - port->membase = (unsigned char __iomem *) __pa(port); - - port->irq = op->archdata.irqs[0]; - - port->dev = &op->dev; - - err = sunserial_register_minors(&sunhv_reg, 1); - if (err) - goto out_free_con_read_page; - - sunserial_console_match(&sunhv_console, op->dev.of_node, - &sunhv_reg, port->line, false); - - err = uart_add_one_port(&sunhv_reg, port); - if (err) - goto out_unregister_driver; - - err = request_irq(port->irq, sunhv_interrupt, 0, "hvcons", port); - if (err) - goto out_remove_port; - - dev_set_drvdata(&op->dev, port); - - return 0; - -out_remove_port: - uart_remove_one_port(&sunhv_reg, port); - -out_unregister_driver: - sunserial_unregister_minors(&sunhv_reg, 1); - -out_free_con_read_page: - kfree(con_read_page); - -out_free_con_write_page: - kfree(con_write_page); - -out_free_port: - kfree(port); - sunhv_port = NULL; - return err; -} - -static int __devexit hv_remove(struct platform_device *dev) -{ - struct uart_port *port = dev_get_drvdata(&dev->dev); - - free_irq(port->irq, port); - - uart_remove_one_port(&sunhv_reg, port); - - sunserial_unregister_minors(&sunhv_reg, 1); - - kfree(port); - sunhv_port = NULL; - - dev_set_drvdata(&dev->dev, NULL); - - return 0; -} - -static const struct of_device_id hv_match[] = { - { - .name = "console", - .compatible = "qcn", - }, - { - .name = "console", - .compatible = "SUNW,sun4v-console", - }, - {}, -}; -MODULE_DEVICE_TABLE(of, hv_match); - -static struct of_platform_driver hv_driver = { - .driver = { - .name = "hv", - .owner = THIS_MODULE, - .of_match_table = hv_match, - }, - .probe = hv_probe, - .remove = __devexit_p(hv_remove), -}; - -static int __init sunhv_init(void) -{ - if (tlb_type != hypervisor) - return -ENODEV; - - return of_register_platform_driver(&hv_driver); -} - -static void __exit sunhv_exit(void) -{ - of_unregister_platform_driver(&hv_driver); -} - -module_init(sunhv_init); -module_exit(sunhv_exit); - -MODULE_AUTHOR("David S. Miller"); -MODULE_DESCRIPTION("SUN4V Hypervisor console driver"); -MODULE_VERSION("2.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c deleted file mode 100644 index 5b246b18f42f..000000000000 --- a/drivers/serial/sunsab.c +++ /dev/null @@ -1,1152 +0,0 @@ -/* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC. - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - * Copyright (C) 2002, 2006 David S. Miller (davem@davemloft.net) - * - * Rewrote buffer handling to use CIRC(Circular Buffer) macros. - * Maxim Krasnyanskiy - * - * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud - * rates to be programmed into the UART. Also eliminated a lot of - * duplicated code in the console setup. - * Theodore Ts'o , 2001-Oct-12 - * - * Ported to new 2.5.x UART layer. - * David S. Miller - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - -#include "suncore.h" -#include "sunsab.h" - -struct uart_sunsab_port { - struct uart_port port; /* Generic UART port */ - union sab82532_async_regs __iomem *regs; /* Chip registers */ - unsigned long irqflags; /* IRQ state flags */ - int dsr; /* Current DSR state */ - unsigned int cec_timeout; /* Chip poll timeout... */ - unsigned int tec_timeout; /* likewise */ - unsigned char interrupt_mask0;/* ISR0 masking */ - unsigned char interrupt_mask1;/* ISR1 masking */ - unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */ - unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */ - unsigned int gis_shift; - int type; /* SAB82532 version */ - - /* Setting configuration bits while the transmitter is active - * can cause garbage characters to get emitted by the chip. - * Therefore, we cache such writes here and do the real register - * write the next time the transmitter becomes idle. - */ - unsigned int cached_ebrg; - unsigned char cached_mode; - unsigned char cached_pvr; - unsigned char cached_dafo; -}; - -/* - * This assumes you have a 29.4912 MHz clock for your UART. - */ -#define SAB_BASE_BAUD ( 29491200 / 16 ) - -static char *sab82532_version[16] = { - "V1.0", "V2.0", "V3.2", "V(0x03)", - "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)", - "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)", - "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)" -}; - -#define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */ -#define SAB82532_MAX_CEC_TIMEOUT 50000 /* 2.5 TX CLKs (at 50 baud) */ - -#define SAB82532_RECV_FIFO_SIZE 32 /* Standard async fifo sizes */ -#define SAB82532_XMIT_FIFO_SIZE 32 - -static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up) -{ - int timeout = up->tec_timeout; - - while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout) - udelay(1); -} - -static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up) -{ - int timeout = up->cec_timeout; - - while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout) - udelay(1); -} - -static struct tty_struct * -receive_chars(struct uart_sunsab_port *up, - union sab82532_irq_status *stat) -{ - struct tty_struct *tty = NULL; - unsigned char buf[32]; - int saw_console_brk = 0; - int free_fifo = 0; - int count = 0; - int i; - - if (up->port.state != NULL) /* Unopened serial console */ - tty = up->port.state->port.tty; - - /* Read number of BYTES (Character + Status) available. */ - if (stat->sreg.isr0 & SAB82532_ISR0_RPF) { - count = SAB82532_RECV_FIFO_SIZE; - free_fifo++; - } - - if (stat->sreg.isr0 & SAB82532_ISR0_TCD) { - count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1); - free_fifo++; - } - - /* Issue a FIFO read command in case we where idle. */ - if (stat->sreg.isr0 & SAB82532_ISR0_TIME) { - sunsab_cec_wait(up); - writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr); - return tty; - } - - if (stat->sreg.isr0 & SAB82532_ISR0_RFO) - free_fifo++; - - /* Read the FIFO. */ - for (i = 0; i < count; i++) - buf[i] = readb(&up->regs->r.rfifo[i]); - - /* Issue Receive Message Complete command. */ - if (free_fifo) { - sunsab_cec_wait(up); - writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr); - } - - /* Count may be zero for BRK, so we check for it here */ - if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) && - (up->port.line == up->port.cons->index)) - saw_console_brk = 1; - - for (i = 0; i < count; i++) { - unsigned char ch = buf[i], flag; - - if (tty == NULL) { - uart_handle_sysrq_char(&up->port, ch); - continue; - } - - flag = TTY_NORMAL; - up->port.icount.rx++; - - if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR | - SAB82532_ISR0_FERR | - SAB82532_ISR0_RFO)) || - unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) { - /* - * For statistics only - */ - if (stat->sreg.isr1 & SAB82532_ISR1_BRK) { - stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR | - SAB82532_ISR0_FERR); - up->port.icount.brk++; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - continue; - } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR) - up->port.icount.parity++; - else if (stat->sreg.isr0 & SAB82532_ISR0_FERR) - up->port.icount.frame++; - if (stat->sreg.isr0 & SAB82532_ISR0_RFO) - up->port.icount.overrun++; - - /* - * Mask off conditions which should be ingored. - */ - stat->sreg.isr0 &= (up->port.read_status_mask & 0xff); - stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff); - - if (stat->sreg.isr1 & SAB82532_ISR1_BRK) { - flag = TTY_BREAK; - } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR) - flag = TTY_PARITY; - else if (stat->sreg.isr0 & SAB82532_ISR0_FERR) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(&up->port, ch)) - continue; - - if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 && - (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0) - tty_insert_flip_char(tty, ch, flag); - if (stat->sreg.isr0 & SAB82532_ISR0_RFO) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - - if (saw_console_brk) - sun_do_break(); - - return tty; -} - -static void sunsab_stop_tx(struct uart_port *); -static void sunsab_tx_idle(struct uart_sunsab_port *); - -static void transmit_chars(struct uart_sunsab_port *up, - union sab82532_irq_status *stat) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int i; - - if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) { - up->interrupt_mask1 |= SAB82532_IMR1_ALLS; - writeb(up->interrupt_mask1, &up->regs->w.imr1); - set_bit(SAB82532_ALLS, &up->irqflags); - } - -#if 0 /* bde@nwlink.com says this check causes problems */ - if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR)) - return; -#endif - - if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW)) - return; - - set_bit(SAB82532_XPR, &up->irqflags); - sunsab_tx_idle(up); - - if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { - up->interrupt_mask1 |= SAB82532_IMR1_XPR; - writeb(up->interrupt_mask1, &up->regs->w.imr1); - return; - } - - up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); - writeb(up->interrupt_mask1, &up->regs->w.imr1); - clear_bit(SAB82532_ALLS, &up->irqflags); - - /* Stuff 32 bytes into Transmit FIFO. */ - clear_bit(SAB82532_XPR, &up->irqflags); - for (i = 0; i < up->port.fifosize; i++) { - writeb(xmit->buf[xmit->tail], - &up->regs->w.xfifo[i]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - /* Issue a Transmit Frame command. */ - sunsab_cec_wait(up); - writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - if (uart_circ_empty(xmit)) - sunsab_stop_tx(&up->port); -} - -static void check_status(struct uart_sunsab_port *up, - union sab82532_irq_status *stat) -{ - if (stat->sreg.isr0 & SAB82532_ISR0_CDSC) - uart_handle_dcd_change(&up->port, - !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD)); - - if (stat->sreg.isr1 & SAB82532_ISR1_CSC) - uart_handle_cts_change(&up->port, - (readb(&up->regs->r.star) & SAB82532_STAR_CTS)); - - if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) { - up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1; - up->port.icount.dsr++; - } - - wake_up_interruptible(&up->port.state->port.delta_msr_wait); -} - -static irqreturn_t sunsab_interrupt(int irq, void *dev_id) -{ - struct uart_sunsab_port *up = dev_id; - struct tty_struct *tty; - union sab82532_irq_status status; - unsigned long flags; - unsigned char gis; - - spin_lock_irqsave(&up->port.lock, flags); - - status.stat = 0; - gis = readb(&up->regs->r.gis) >> up->gis_shift; - if (gis & 1) - status.sreg.isr0 = readb(&up->regs->r.isr0); - if (gis & 2) - status.sreg.isr1 = readb(&up->regs->r.isr1); - - tty = NULL; - if (status.stat) { - if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | - SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) || - (status.sreg.isr1 & SAB82532_ISR1_BRK)) - tty = receive_chars(up, &status); - if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) || - (status.sreg.isr1 & SAB82532_ISR1_CSC)) - check_status(up, &status); - if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR)) - transmit_chars(up, &status); - } - - spin_unlock_irqrestore(&up->port.lock, flags); - - if (tty) - tty_flip_buffer_push(tty); - - return IRQ_HANDLED; -} - -/* port->lock is not held. */ -static unsigned int sunsab_tx_empty(struct uart_port *port) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - int ret; - - /* Do not need a lock for a state test like this. */ - if (test_bit(SAB82532_ALLS, &up->irqflags)) - ret = TIOCSER_TEMT; - else - ret = 0; - - return ret; -} - -/* port->lock held by caller. */ -static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - - if (mctrl & TIOCM_RTS) { - up->cached_mode &= ~SAB82532_MODE_FRTS; - up->cached_mode |= SAB82532_MODE_RTS; - } else { - up->cached_mode |= (SAB82532_MODE_FRTS | - SAB82532_MODE_RTS); - } - if (mctrl & TIOCM_DTR) { - up->cached_pvr &= ~(up->pvr_dtr_bit); - } else { - up->cached_pvr |= up->pvr_dtr_bit; - } - - set_bit(SAB82532_REGS_PENDING, &up->irqflags); - if (test_bit(SAB82532_XPR, &up->irqflags)) - sunsab_tx_idle(up); -} - -/* port->lock is held by caller and interrupts are disabled. */ -static unsigned int sunsab_get_mctrl(struct uart_port *port) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - unsigned char val; - unsigned int result; - - result = 0; - - val = readb(&up->regs->r.pvr); - result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR; - - val = readb(&up->regs->r.vstr); - result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR; - - val = readb(&up->regs->r.star); - result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0; - - return result; -} - -/* port->lock held by caller. */ -static void sunsab_stop_tx(struct uart_port *port) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - - up->interrupt_mask1 |= SAB82532_IMR1_XPR; - writeb(up->interrupt_mask1, &up->regs->w.imr1); -} - -/* port->lock held by caller. */ -static void sunsab_tx_idle(struct uart_sunsab_port *up) -{ - if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) { - u8 tmp; - - clear_bit(SAB82532_REGS_PENDING, &up->irqflags); - writeb(up->cached_mode, &up->regs->rw.mode); - writeb(up->cached_pvr, &up->regs->rw.pvr); - writeb(up->cached_dafo, &up->regs->w.dafo); - - writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr); - tmp = readb(&up->regs->rw.ccr2); - tmp &= ~0xc0; - tmp |= (up->cached_ebrg >> 2) & 0xc0; - writeb(tmp, &up->regs->rw.ccr2); - } -} - -/* port->lock held by caller. */ -static void sunsab_start_tx(struct uart_port *port) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - struct circ_buf *xmit = &up->port.state->xmit; - int i; - - up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); - writeb(up->interrupt_mask1, &up->regs->w.imr1); - - if (!test_bit(SAB82532_XPR, &up->irqflags)) - return; - - clear_bit(SAB82532_ALLS, &up->irqflags); - clear_bit(SAB82532_XPR, &up->irqflags); - - for (i = 0; i < up->port.fifosize; i++) { - writeb(xmit->buf[xmit->tail], - &up->regs->w.xfifo[i]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - /* Issue a Transmit Frame command. */ - sunsab_cec_wait(up); - writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr); -} - -/* port->lock is not held. */ -static void sunsab_send_xchar(struct uart_port *port, char ch) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - sunsab_tec_wait(up); - writeb(ch, &up->regs->w.tic); - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -/* port->lock held by caller. */ -static void sunsab_stop_rx(struct uart_port *port) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - - up->interrupt_mask0 |= SAB82532_IMR0_TCD; - writeb(up->interrupt_mask1, &up->regs->w.imr0); -} - -/* port->lock held by caller. */ -static void sunsab_enable_ms(struct uart_port *port) -{ - /* For now we always receive these interrupts. */ -} - -/* port->lock is not held. */ -static void sunsab_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - unsigned long flags; - unsigned char val; - - spin_lock_irqsave(&up->port.lock, flags); - - val = up->cached_dafo; - if (break_state) - val |= SAB82532_DAFO_XBRK; - else - val &= ~SAB82532_DAFO_XBRK; - up->cached_dafo = val; - - set_bit(SAB82532_REGS_PENDING, &up->irqflags); - if (test_bit(SAB82532_XPR, &up->irqflags)) - sunsab_tx_idle(up); - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -/* port->lock is not held. */ -static int sunsab_startup(struct uart_port *port) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - unsigned long flags; - unsigned char tmp; - int err = request_irq(up->port.irq, sunsab_interrupt, - IRQF_SHARED, "sab", up); - if (err) - return err; - - spin_lock_irqsave(&up->port.lock, flags); - - /* - * Wait for any commands or immediate characters - */ - sunsab_cec_wait(up); - sunsab_tec_wait(up); - - /* - * Clear the FIFO buffers. - */ - writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr); - sunsab_cec_wait(up); - writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr); - - /* - * Clear the interrupt registers. - */ - (void) readb(&up->regs->r.isr0); - (void) readb(&up->regs->r.isr1); - - /* - * Now, initialize the UART - */ - writeb(0, &up->regs->w.ccr0); /* power-down */ - writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ | - SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0); - writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1); - writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL | - SAB82532_CCR2_TOE, &up->regs->w.ccr2); - writeb(0, &up->regs->w.ccr3); - writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4); - up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS | - SAB82532_MODE_RAC); - writeb(up->cached_mode, &up->regs->w.mode); - writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc); - - tmp = readb(&up->regs->rw.ccr0); - tmp |= SAB82532_CCR0_PU; /* power-up */ - writeb(tmp, &up->regs->rw.ccr0); - - /* - * Finally, enable interrupts - */ - up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR | - SAB82532_IMR0_PLLA); - writeb(up->interrupt_mask0, &up->regs->w.imr0); - up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS | - SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN | - SAB82532_IMR1_CSC | SAB82532_IMR1_XON | - SAB82532_IMR1_XPR); - writeb(up->interrupt_mask1, &up->regs->w.imr1); - set_bit(SAB82532_ALLS, &up->irqflags); - set_bit(SAB82532_XPR, &up->irqflags); - - spin_unlock_irqrestore(&up->port.lock, flags); - - return 0; -} - -/* port->lock is not held. */ -static void sunsab_shutdown(struct uart_port *port) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - - /* Disable Interrupts */ - up->interrupt_mask0 = 0xff; - writeb(up->interrupt_mask0, &up->regs->w.imr0); - up->interrupt_mask1 = 0xff; - writeb(up->interrupt_mask1, &up->regs->w.imr1); - - /* Disable break condition */ - up->cached_dafo = readb(&up->regs->rw.dafo); - up->cached_dafo &= ~SAB82532_DAFO_XBRK; - writeb(up->cached_dafo, &up->regs->rw.dafo); - - /* Disable Receiver */ - up->cached_mode &= ~SAB82532_MODE_RAC; - writeb(up->cached_mode, &up->regs->rw.mode); - - /* - * XXX FIXME - * - * If the chip is powered down here the system hangs/crashes during - * reboot or shutdown. This needs to be investigated further, - * similar behaviour occurs in 2.4 when the driver is configured - * as a module only. One hint may be that data is sometimes - * transmitted at 9600 baud during shutdown (regardless of the - * speed the chip was configured for when the port was open). - */ -#if 0 - /* Power Down */ - tmp = readb(&up->regs->rw.ccr0); - tmp &= ~SAB82532_CCR0_PU; - writeb(tmp, &up->regs->rw.ccr0); -#endif - - spin_unlock_irqrestore(&up->port.lock, flags); - free_irq(up->port.irq, up); -} - -/* - * This is used to figure out the divisor speeds. - * - * The formula is: Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)), - * - * with 0 <= N < 64 and 0 <= M < 16 - */ - -static void calc_ebrg(int baud, int *n_ret, int *m_ret) -{ - int n, m; - - if (baud == 0) { - *n_ret = 0; - *m_ret = 0; - return; - } - - /* - * We scale numbers by 10 so that we get better accuracy - * without having to use floating point. Here we increment m - * until n is within the valid range. - */ - n = (SAB_BASE_BAUD * 10) / baud; - m = 0; - while (n >= 640) { - n = n / 2; - m++; - } - n = (n+5) / 10; - /* - * We try very hard to avoid speeds with M == 0 since they may - * not work correctly for XTAL frequences above 10 MHz. - */ - if ((m == 0) && ((n & 1) == 0)) { - n = n / 2; - m++; - } - *n_ret = n - 1; - *m_ret = m; -} - -/* Internal routine, port->lock is held and local interrupts are disabled. */ -static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag, - unsigned int iflag, unsigned int baud, - unsigned int quot) -{ - unsigned char dafo; - int bits, n, m; - - /* Byte size and parity */ - switch (cflag & CSIZE) { - case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break; - case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break; - case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break; - case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break; - /* Never happens, but GCC is too dumb to figure it out */ - default: dafo = SAB82532_DAFO_CHL5; bits = 7; break; - } - - if (cflag & CSTOPB) { - dafo |= SAB82532_DAFO_STOP; - bits++; - } - - if (cflag & PARENB) { - dafo |= SAB82532_DAFO_PARE; - bits++; - } - - if (cflag & PARODD) { - dafo |= SAB82532_DAFO_PAR_ODD; - } else { - dafo |= SAB82532_DAFO_PAR_EVEN; - } - up->cached_dafo = dafo; - - calc_ebrg(baud, &n, &m); - - up->cached_ebrg = n | (m << 6); - - up->tec_timeout = (10 * 1000000) / baud; - up->cec_timeout = up->tec_timeout >> 2; - - /* CTS flow control flags */ - /* We encode read_status_mask and ignore_status_mask like so: - * - * --------------------- - * | ... | ISR1 | ISR0 | - * --------------------- - * .. 15 8 7 0 - */ - - up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | - SAB82532_ISR0_RFO | SAB82532_ISR0_RPF | - SAB82532_ISR0_CDSC); - up->port.read_status_mask |= (SAB82532_ISR1_CSC | - SAB82532_ISR1_ALLS | - SAB82532_ISR1_XPR) << 8; - if (iflag & INPCK) - up->port.read_status_mask |= (SAB82532_ISR0_PERR | - SAB82532_ISR0_FERR); - if (iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8); - - /* - * Characteres to ignore - */ - up->port.ignore_status_mask = 0; - if (iflag & IGNPAR) - up->port.ignore_status_mask |= (SAB82532_ISR0_PERR | - SAB82532_ISR0_FERR); - if (iflag & IGNBRK) { - up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8); - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (iflag & IGNPAR) - up->port.ignore_status_mask |= SAB82532_ISR0_RFO; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((cflag & CREAD) == 0) - up->port.ignore_status_mask |= (SAB82532_ISR0_RPF | - SAB82532_ISR0_TCD); - - uart_update_timeout(&up->port, cflag, - (up->port.uartclk / (16 * quot))); - - /* Now schedule a register update when the chip's - * transmitter is idle. - */ - up->cached_mode |= SAB82532_MODE_RAC; - set_bit(SAB82532_REGS_PENDING, &up->irqflags); - if (test_bit(SAB82532_XPR, &up->irqflags)) - sunsab_tx_idle(up); -} - -/* port->lock is not held. */ -static void sunsab_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; - unsigned long flags; - unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); - unsigned int quot = uart_get_divisor(port, baud); - - spin_lock_irqsave(&up->port.lock, flags); - sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud, quot); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static const char *sunsab_type(struct uart_port *port) -{ - struct uart_sunsab_port *up = (void *)port; - static char buf[36]; - - sprintf(buf, "SAB82532 %s", sab82532_version[up->type]); - return buf; -} - -static void sunsab_release_port(struct uart_port *port) -{ -} - -static int sunsab_request_port(struct uart_port *port) -{ - return 0; -} - -static void sunsab_config_port(struct uart_port *port, int flags) -{ -} - -static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return -EINVAL; -} - -static struct uart_ops sunsab_pops = { - .tx_empty = sunsab_tx_empty, - .set_mctrl = sunsab_set_mctrl, - .get_mctrl = sunsab_get_mctrl, - .stop_tx = sunsab_stop_tx, - .start_tx = sunsab_start_tx, - .send_xchar = sunsab_send_xchar, - .stop_rx = sunsab_stop_rx, - .enable_ms = sunsab_enable_ms, - .break_ctl = sunsab_break_ctl, - .startup = sunsab_startup, - .shutdown = sunsab_shutdown, - .set_termios = sunsab_set_termios, - .type = sunsab_type, - .release_port = sunsab_release_port, - .request_port = sunsab_request_port, - .config_port = sunsab_config_port, - .verify_port = sunsab_verify_port, -}; - -static struct uart_driver sunsab_reg = { - .owner = THIS_MODULE, - .driver_name = "sunsab", - .dev_name = "ttyS", - .major = TTY_MAJOR, -}; - -static struct uart_sunsab_port *sunsab_ports; - -#ifdef CONFIG_SERIAL_SUNSAB_CONSOLE - -static void sunsab_console_putchar(struct uart_port *port, int c) -{ - struct uart_sunsab_port *up = (struct uart_sunsab_port *)port; - - sunsab_tec_wait(up); - writeb(c, &up->regs->w.tic); -} - -static void sunsab_console_write(struct console *con, const char *s, unsigned n) -{ - struct uart_sunsab_port *up = &sunsab_ports[con->index]; - unsigned long flags; - int locked = 1; - - local_irq_save(flags); - if (up->port.sysrq) { - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&up->port.lock); - } else - spin_lock(&up->port.lock); - - uart_console_write(&up->port, s, n, sunsab_console_putchar); - sunsab_tec_wait(up); - - if (locked) - spin_unlock(&up->port.lock); - local_irq_restore(flags); -} - -static int sunsab_console_setup(struct console *con, char *options) -{ - struct uart_sunsab_port *up = &sunsab_ports[con->index]; - unsigned long flags; - unsigned int baud, quot; - - /* - * The console framework calls us for each and every port - * registered. Defer the console setup until the requested - * port has been properly discovered. A bit of a hack, - * though... - */ - if (up->port.type != PORT_SUNSAB) - return -1; - - printk("Console: ttyS%d (SAB82532)\n", - (sunsab_reg.minor - 64) + con->index); - - sunserial_console_termios(con, up->port.dev->of_node); - - switch (con->cflag & CBAUD) { - case B150: baud = 150; break; - case B300: baud = 300; break; - case B600: baud = 600; break; - case B1200: baud = 1200; break; - case B2400: baud = 2400; break; - case B4800: baud = 4800; break; - default: case B9600: baud = 9600; break; - case B19200: baud = 19200; break; - case B38400: baud = 38400; break; - case B57600: baud = 57600; break; - case B115200: baud = 115200; break; - case B230400: baud = 230400; break; - case B460800: baud = 460800; break; - }; - - /* - * Temporary fix. - */ - spin_lock_init(&up->port.lock); - - /* - * Initialize the hardware - */ - sunsab_startup(&up->port); - - spin_lock_irqsave(&up->port.lock, flags); - - /* - * Finally, enable interrupts - */ - up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR | - SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC; - writeb(up->interrupt_mask0, &up->regs->w.imr0); - up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS | - SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN | - SAB82532_IMR1_CSC | SAB82532_IMR1_XON | - SAB82532_IMR1_XPR; - writeb(up->interrupt_mask1, &up->regs->w.imr1); - - quot = uart_get_divisor(&up->port, baud); - sunsab_convert_to_sab(up, con->cflag, 0, baud, quot); - sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); - - spin_unlock_irqrestore(&up->port.lock, flags); - - return 0; -} - -static struct console sunsab_console = { - .name = "ttyS", - .write = sunsab_console_write, - .device = uart_console_device, - .setup = sunsab_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sunsab_reg, -}; - -static inline struct console *SUNSAB_CONSOLE(void) -{ - return &sunsab_console; -} -#else -#define SUNSAB_CONSOLE() (NULL) -#define sunsab_console_init() do { } while (0) -#endif - -static int __devinit sunsab_init_one(struct uart_sunsab_port *up, - struct platform_device *op, - unsigned long offset, - int line) -{ - up->port.line = line; - up->port.dev = &op->dev; - - up->port.mapbase = op->resource[0].start + offset; - up->port.membase = of_ioremap(&op->resource[0], offset, - sizeof(union sab82532_async_regs), - "sab"); - if (!up->port.membase) - return -ENOMEM; - up->regs = (union sab82532_async_regs __iomem *) up->port.membase; - - up->port.irq = op->archdata.irqs[0]; - - up->port.fifosize = SAB82532_XMIT_FIFO_SIZE; - up->port.iotype = UPIO_MEM; - - writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc); - - up->port.ops = &sunsab_pops; - up->port.type = PORT_SUNSAB; - up->port.uartclk = SAB_BASE_BAUD; - - up->type = readb(&up->regs->r.vstr) & 0x0f; - writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr); - writeb(0xff, &up->regs->w.pim); - if ((up->port.line & 0x1) == 0) { - up->pvr_dsr_bit = (1 << 0); - up->pvr_dtr_bit = (1 << 1); - up->gis_shift = 2; - } else { - up->pvr_dsr_bit = (1 << 3); - up->pvr_dtr_bit = (1 << 2); - up->gis_shift = 0; - } - up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4); - writeb(up->cached_pvr, &up->regs->w.pvr); - up->cached_mode = readb(&up->regs->rw.mode); - up->cached_mode |= SAB82532_MODE_FRTS; - writeb(up->cached_mode, &up->regs->rw.mode); - up->cached_mode |= SAB82532_MODE_RTS; - writeb(up->cached_mode, &up->regs->rw.mode); - - up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT; - up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT; - - return 0; -} - -static int __devinit sab_probe(struct platform_device *op, const struct of_device_id *match) -{ - static int inst; - struct uart_sunsab_port *up; - int err; - - up = &sunsab_ports[inst * 2]; - - err = sunsab_init_one(&up[0], op, - 0, - (inst * 2) + 0); - if (err) - goto out; - - err = sunsab_init_one(&up[1], op, - sizeof(union sab82532_async_regs), - (inst * 2) + 1); - if (err) - goto out1; - - sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node, - &sunsab_reg, up[0].port.line, - false); - - sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node, - &sunsab_reg, up[1].port.line, - false); - - err = uart_add_one_port(&sunsab_reg, &up[0].port); - if (err) - goto out2; - - err = uart_add_one_port(&sunsab_reg, &up[1].port); - if (err) - goto out3; - - dev_set_drvdata(&op->dev, &up[0]); - - inst++; - - return 0; - -out3: - uart_remove_one_port(&sunsab_reg, &up[0].port); -out2: - of_iounmap(&op->resource[0], - up[1].port.membase, - sizeof(union sab82532_async_regs)); -out1: - of_iounmap(&op->resource[0], - up[0].port.membase, - sizeof(union sab82532_async_regs)); -out: - return err; -} - -static int __devexit sab_remove(struct platform_device *op) -{ - struct uart_sunsab_port *up = dev_get_drvdata(&op->dev); - - uart_remove_one_port(&sunsab_reg, &up[1].port); - uart_remove_one_port(&sunsab_reg, &up[0].port); - of_iounmap(&op->resource[0], - up[1].port.membase, - sizeof(union sab82532_async_regs)); - of_iounmap(&op->resource[0], - up[0].port.membase, - sizeof(union sab82532_async_regs)); - - dev_set_drvdata(&op->dev, NULL); - - return 0; -} - -static const struct of_device_id sab_match[] = { - { - .name = "se", - }, - { - .name = "serial", - .compatible = "sab82532", - }, - {}, -}; -MODULE_DEVICE_TABLE(of, sab_match); - -static struct of_platform_driver sab_driver = { - .driver = { - .name = "sab", - .owner = THIS_MODULE, - .of_match_table = sab_match, - }, - .probe = sab_probe, - .remove = __devexit_p(sab_remove), -}; - -static int __init sunsab_init(void) -{ - struct device_node *dp; - int err; - int num_channels = 0; - - for_each_node_by_name(dp, "se") - num_channels += 2; - for_each_node_by_name(dp, "serial") { - if (of_device_is_compatible(dp, "sab82532")) - num_channels += 2; - } - - if (num_channels) { - sunsab_ports = kzalloc(sizeof(struct uart_sunsab_port) * - num_channels, GFP_KERNEL); - if (!sunsab_ports) - return -ENOMEM; - - err = sunserial_register_minors(&sunsab_reg, num_channels); - if (err) { - kfree(sunsab_ports); - sunsab_ports = NULL; - - return err; - } - } - - return of_register_platform_driver(&sab_driver); -} - -static void __exit sunsab_exit(void) -{ - of_unregister_platform_driver(&sab_driver); - if (sunsab_reg.nr) { - sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr); - } - - kfree(sunsab_ports); - sunsab_ports = NULL; -} - -module_init(sunsab_init); -module_exit(sunsab_exit); - -MODULE_AUTHOR("Eddie C. Dost and David S. Miller"); -MODULE_DESCRIPTION("Sun SAB82532 serial port driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/sunsab.h b/drivers/serial/sunsab.h deleted file mode 100644 index b78e1f7b8050..000000000000 --- a/drivers/serial/sunsab.h +++ /dev/null @@ -1,322 +0,0 @@ -/* sunsab.h: Register Definitions for the Siemens SAB82532 DUSCC - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - */ - -#ifndef _SUNSAB_H -#define _SUNSAB_H - -struct sab82532_async_rd_regs { - u8 rfifo[0x20]; /* Receive FIFO */ - u8 star; /* Status Register */ - u8 __pad1; - u8 mode; /* Mode Register */ - u8 timr; /* Timer Register */ - u8 xon; /* XON Character */ - u8 xoff; /* XOFF Character */ - u8 tcr; /* Termination Character Register */ - u8 dafo; /* Data Format */ - u8 rfc; /* RFIFO Control Register */ - u8 __pad2; - u8 rbcl; /* Receive Byte Count Low */ - u8 rbch; /* Receive Byte Count High */ - u8 ccr0; /* Channel Configuration Register 0 */ - u8 ccr1; /* Channel Configuration Register 1 */ - u8 ccr2; /* Channel Configuration Register 2 */ - u8 ccr3; /* Channel Configuration Register 3 */ - u8 __pad3[4]; - u8 vstr; /* Version Status Register */ - u8 __pad4[3]; - u8 gis; /* Global Interrupt Status */ - u8 ipc; /* Interrupt Port Configuration */ - u8 isr0; /* Interrupt Status 0 */ - u8 isr1; /* Interrupt Status 1 */ - u8 pvr; /* Port Value Register */ - u8 pis; /* Port Interrupt Status */ - u8 pcr; /* Port Configuration Register */ - u8 ccr4; /* Channel Configuration Register 4 */ -}; - -struct sab82532_async_wr_regs { - u8 xfifo[0x20]; /* Transmit FIFO */ - u8 cmdr; /* Command Register */ - u8 __pad1; - u8 mode; - u8 timr; - u8 xon; - u8 xoff; - u8 tcr; - u8 dafo; - u8 rfc; - u8 __pad2; - u8 xbcl; /* Transmit Byte Count Low */ - u8 xbch; /* Transmit Byte Count High */ - u8 ccr0; - u8 ccr1; - u8 ccr2; - u8 ccr3; - u8 tsax; /* Time-Slot Assignment Reg. Transmit */ - u8 tsar; /* Time-Slot Assignment Reg. Receive */ - u8 xccr; /* Transmit Channel Capacity Register */ - u8 rccr; /* Receive Channel Capacity Register */ - u8 bgr; /* Baud Rate Generator Register */ - u8 tic; /* Transmit Immediate Character */ - u8 mxn; /* Mask XON Character */ - u8 mxf; /* Mask XOFF Character */ - u8 iva; /* Interrupt Vector Address */ - u8 ipc; - u8 imr0; /* Interrupt Mask Register 0 */ - u8 imr1; /* Interrupt Mask Register 1 */ - u8 pvr; - u8 pim; /* Port Interrupt Mask */ - u8 pcr; - u8 ccr4; -}; - -struct sab82532_async_rw_regs { /* Read/Write registers */ - u8 __pad1[0x20]; - u8 __pad2; - u8 __pad3; - u8 mode; - u8 timr; - u8 xon; - u8 xoff; - u8 tcr; - u8 dafo; - u8 rfc; - u8 __pad4; - u8 __pad5; - u8 __pad6; - u8 ccr0; - u8 ccr1; - u8 ccr2; - u8 ccr3; - u8 __pad7; - u8 __pad8; - u8 __pad9; - u8 __pad10; - u8 __pad11; - u8 __pad12; - u8 __pad13; - u8 __pad14; - u8 __pad15; - u8 ipc; - u8 __pad16; - u8 __pad17; - u8 pvr; - u8 __pad18; - u8 pcr; - u8 ccr4; -}; - -union sab82532_async_regs { - __volatile__ struct sab82532_async_rd_regs r; - __volatile__ struct sab82532_async_wr_regs w; - __volatile__ struct sab82532_async_rw_regs rw; -}; - -union sab82532_irq_status { - unsigned short stat; - struct { - unsigned char isr0; - unsigned char isr1; - } sreg; -}; - -/* irqflags bits */ -#define SAB82532_ALLS 0x00000001 -#define SAB82532_XPR 0x00000002 -#define SAB82532_REGS_PENDING 0x00000004 - -/* RFIFO Status Byte */ -#define SAB82532_RSTAT_PE 0x80 -#define SAB82532_RSTAT_FE 0x40 -#define SAB82532_RSTAT_PARITY 0x01 - -/* Status Register (STAR) */ -#define SAB82532_STAR_XDOV 0x80 -#define SAB82532_STAR_XFW 0x40 -#define SAB82532_STAR_RFNE 0x20 -#define SAB82532_STAR_FCS 0x10 -#define SAB82532_STAR_TEC 0x08 -#define SAB82532_STAR_CEC 0x04 -#define SAB82532_STAR_CTS 0x02 - -/* Command Register (CMDR) */ -#define SAB82532_CMDR_RMC 0x80 -#define SAB82532_CMDR_RRES 0x40 -#define SAB82532_CMDR_RFRD 0x20 -#define SAB82532_CMDR_STI 0x10 -#define SAB82532_CMDR_XF 0x08 -#define SAB82532_CMDR_XRES 0x01 - -/* Mode Register (MODE) */ -#define SAB82532_MODE_FRTS 0x40 -#define SAB82532_MODE_FCTS 0x20 -#define SAB82532_MODE_FLON 0x10 -#define SAB82532_MODE_RAC 0x08 -#define SAB82532_MODE_RTS 0x04 -#define SAB82532_MODE_TRS 0x02 -#define SAB82532_MODE_TLP 0x01 - -/* Timer Register (TIMR) */ -#define SAB82532_TIMR_CNT_MASK 0xe0 -#define SAB82532_TIMR_VALUE_MASK 0x1f - -/* Data Format (DAFO) */ -#define SAB82532_DAFO_XBRK 0x40 -#define SAB82532_DAFO_STOP 0x20 -#define SAB82532_DAFO_PAR_SPACE 0x00 -#define SAB82532_DAFO_PAR_ODD 0x08 -#define SAB82532_DAFO_PAR_EVEN 0x10 -#define SAB82532_DAFO_PAR_MARK 0x18 -#define SAB82532_DAFO_PARE 0x04 -#define SAB82532_DAFO_CHL8 0x00 -#define SAB82532_DAFO_CHL7 0x01 -#define SAB82532_DAFO_CHL6 0x02 -#define SAB82532_DAFO_CHL5 0x03 - -/* RFIFO Control Register (RFC) */ -#define SAB82532_RFC_DPS 0x40 -#define SAB82532_RFC_DXS 0x20 -#define SAB82532_RFC_RFDF 0x10 -#define SAB82532_RFC_RFTH_1 0x00 -#define SAB82532_RFC_RFTH_4 0x04 -#define SAB82532_RFC_RFTH_16 0x08 -#define SAB82532_RFC_RFTH_32 0x0c -#define SAB82532_RFC_TCDE 0x01 - -/* Received Byte Count High (RBCH) */ -#define SAB82532_RBCH_DMA 0x80 -#define SAB82532_RBCH_CAS 0x20 - -/* Transmit Byte Count High (XBCH) */ -#define SAB82532_XBCH_DMA 0x80 -#define SAB82532_XBCH_CAS 0x20 -#define SAB82532_XBCH_XC 0x10 - -/* Channel Configuration Register 0 (CCR0) */ -#define SAB82532_CCR0_PU 0x80 -#define SAB82532_CCR0_MCE 0x40 -#define SAB82532_CCR0_SC_NRZ 0x00 -#define SAB82532_CCR0_SC_NRZI 0x08 -#define SAB82532_CCR0_SC_FM0 0x10 -#define SAB82532_CCR0_SC_FM1 0x14 -#define SAB82532_CCR0_SC_MANCH 0x18 -#define SAB82532_CCR0_SM_HDLC 0x00 -#define SAB82532_CCR0_SM_SDLC_LOOP 0x01 -#define SAB82532_CCR0_SM_BISYNC 0x02 -#define SAB82532_CCR0_SM_ASYNC 0x03 - -/* Channel Configuration Register 1 (CCR1) */ -#define SAB82532_CCR1_ODS 0x10 -#define SAB82532_CCR1_BCR 0x08 -#define SAB82532_CCR1_CM_MASK 0x07 - -/* Channel Configuration Register 2 (CCR2) */ -#define SAB82532_CCR2_SOC1 0x80 -#define SAB82532_CCR2_SOC0 0x40 -#define SAB82532_CCR2_BR9 0x80 -#define SAB82532_CCR2_BR8 0x40 -#define SAB82532_CCR2_BDF 0x20 -#define SAB82532_CCR2_SSEL 0x10 -#define SAB82532_CCR2_XCS0 0x20 -#define SAB82532_CCR2_RCS0 0x10 -#define SAB82532_CCR2_TOE 0x08 -#define SAB82532_CCR2_RWX 0x04 -#define SAB82532_CCR2_DIV 0x01 - -/* Channel Configuration Register 3 (CCR3) */ -#define SAB82532_CCR3_PSD 0x01 - -/* Time Slot Assignment Register Transmit (TSAX) */ -#define SAB82532_TSAX_TSNX_MASK 0xfc -#define SAB82532_TSAX_XCS2 0x02 /* see also CCR2 */ -#define SAB82532_TSAX_XCS1 0x01 - -/* Time Slot Assignment Register Receive (TSAR) */ -#define SAB82532_TSAR_TSNR_MASK 0xfc -#define SAB82532_TSAR_RCS2 0x02 /* see also CCR2 */ -#define SAB82532_TSAR_RCS1 0x01 - -/* Version Status Register (VSTR) */ -#define SAB82532_VSTR_CD 0x80 -#define SAB82532_VSTR_DPLA 0x40 -#define SAB82532_VSTR_VN_MASK 0x0f -#define SAB82532_VSTR_VN_1 0x00 -#define SAB82532_VSTR_VN_2 0x01 -#define SAB82532_VSTR_VN_3_2 0x02 - -/* Global Interrupt Status Register (GIS) */ -#define SAB82532_GIS_PI 0x80 -#define SAB82532_GIS_ISA1 0x08 -#define SAB82532_GIS_ISA0 0x04 -#define SAB82532_GIS_ISB1 0x02 -#define SAB82532_GIS_ISB0 0x01 - -/* Interrupt Vector Address (IVA) */ -#define SAB82532_IVA_MASK 0xf1 - -/* Interrupt Port Configuration (IPC) */ -#define SAB82532_IPC_VIS 0x80 -#define SAB82532_IPC_SLA1 0x10 -#define SAB82532_IPC_SLA0 0x08 -#define SAB82532_IPC_CASM 0x04 -#define SAB82532_IPC_IC_OPEN_DRAIN 0x00 -#define SAB82532_IPC_IC_ACT_LOW 0x01 -#define SAB82532_IPC_IC_ACT_HIGH 0x03 - -/* Interrupt Status Register 0 (ISR0) */ -#define SAB82532_ISR0_TCD 0x80 -#define SAB82532_ISR0_TIME 0x40 -#define SAB82532_ISR0_PERR 0x20 -#define SAB82532_ISR0_FERR 0x10 -#define SAB82532_ISR0_PLLA 0x08 -#define SAB82532_ISR0_CDSC 0x04 -#define SAB82532_ISR0_RFO 0x02 -#define SAB82532_ISR0_RPF 0x01 - -/* Interrupt Status Register 1 (ISR1) */ -#define SAB82532_ISR1_BRK 0x80 -#define SAB82532_ISR1_BRKT 0x40 -#define SAB82532_ISR1_ALLS 0x20 -#define SAB82532_ISR1_XOFF 0x10 -#define SAB82532_ISR1_TIN 0x08 -#define SAB82532_ISR1_CSC 0x04 -#define SAB82532_ISR1_XON 0x02 -#define SAB82532_ISR1_XPR 0x01 - -/* Interrupt Mask Register 0 (IMR0) */ -#define SAB82532_IMR0_TCD 0x80 -#define SAB82532_IMR0_TIME 0x40 -#define SAB82532_IMR0_PERR 0x20 -#define SAB82532_IMR0_FERR 0x10 -#define SAB82532_IMR0_PLLA 0x08 -#define SAB82532_IMR0_CDSC 0x04 -#define SAB82532_IMR0_RFO 0x02 -#define SAB82532_IMR0_RPF 0x01 - -/* Interrupt Mask Register 1 (IMR1) */ -#define SAB82532_IMR1_BRK 0x80 -#define SAB82532_IMR1_BRKT 0x40 -#define SAB82532_IMR1_ALLS 0x20 -#define SAB82532_IMR1_XOFF 0x10 -#define SAB82532_IMR1_TIN 0x08 -#define SAB82532_IMR1_CSC 0x04 -#define SAB82532_IMR1_XON 0x02 -#define SAB82532_IMR1_XPR 0x01 - -/* Port Interrupt Status Register (PIS) */ -#define SAB82532_PIS_SYNC_B 0x08 -#define SAB82532_PIS_DTR_B 0x04 -#define SAB82532_PIS_DTR_A 0x02 -#define SAB82532_PIS_SYNC_A 0x01 - -/* Channel Configuration Register 4 (CCR4) */ -#define SAB82532_CCR4_MCK4 0x80 -#define SAB82532_CCR4_EBRG 0x40 -#define SAB82532_CCR4_TST1 0x20 -#define SAB82532_CCR4_ICD 0x10 - - -#endif /* !(_SUNSAB_H) */ diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c deleted file mode 100644 index 551ebfe3ccbb..000000000000 --- a/drivers/serial/sunsu.c +++ /dev/null @@ -1,1608 +0,0 @@ -/* - * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com) - * - * This is mainly a variation of 8250.c, credits go to authors mentioned - * therein. In fact this driver should be merged into the generic 8250.c - * infrastructure perhaps using a 8250_sparc.c module. - * - * Fixed to use tty_get_baud_rate(). - * Theodore Ts'o , 2001-Oct-12 - * - * Converted to new 2.5.x UART layer. - * David S. Miller (davem@davemloft.net), 2002-Jul-29 - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_SERIO -#include -#endif -#include -#include -#include -#include - -#include -#include -#include - -#if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - -#include "suncore.h" - -/* We are on a NS PC87303 clocked with 24.0 MHz, which results - * in a UART clock of 1.8462 MHz. - */ -#define SU_BASE_BAUD (1846200 / 16) - -enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT }; -static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" }; - -/* - * Here we define the default xmit fifo size used for each type of UART. - */ -static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = { - { "unknown", 1, 0 }, - { "8250", 1, 0 }, - { "16450", 1, 0 }, - { "16550", 1, 0 }, - { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO }, - { "Cirrus", 1, 0 }, - { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH }, - { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, - { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO }, - { "Startech", 1, 0 }, - { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO }, - { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, - { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, - { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO } -}; - -struct uart_sunsu_port { - struct uart_port port; - unsigned char acr; - unsigned char ier; - unsigned short rev; - unsigned char lcr; - unsigned int lsr_break_flag; - unsigned int cflag; - - /* Probing information. */ - enum su_type su_type; - unsigned int type_probed; /* XXX Stupid */ - unsigned long reg_size; - -#ifdef CONFIG_SERIO - struct serio serio; - int serio_open; -#endif -}; - -static unsigned int serial_in(struct uart_sunsu_port *up, int offset) -{ - offset <<= up->port.regshift; - - switch (up->port.iotype) { - case UPIO_HUB6: - outb(up->port.hub6 - 1 + offset, up->port.iobase); - return inb(up->port.iobase + 1); - - case UPIO_MEM: - return readb(up->port.membase + offset); - - default: - return inb(up->port.iobase + offset); - } -} - -static void serial_out(struct uart_sunsu_port *up, int offset, int value) -{ -#ifndef CONFIG_SPARC64 - /* - * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are - * connected with a gate then go to SlavIO. When IRQ4 goes tristated - * gate outputs a logical one. Since we use level triggered interrupts - * we have lockup and watchdog reset. We cannot mask IRQ because - * keyboard shares IRQ with us (Word has it as Bob Smelik's design). - * This problem is similar to what Alpha people suffer, see serial.c. - */ - if (offset == UART_MCR) - value |= UART_MCR_OUT2; -#endif - offset <<= up->port.regshift; - - switch (up->port.iotype) { - case UPIO_HUB6: - outb(up->port.hub6 - 1 + offset, up->port.iobase); - outb(value, up->port.iobase + 1); - break; - - case UPIO_MEM: - writeb(value, up->port.membase + offset); - break; - - default: - outb(value, up->port.iobase + offset); - } -} - -/* - * We used to support using pause I/O for certain machines. We - * haven't supported this for a while, but just in case it's badly - * needed for certain old 386 machines, I've left these #define's - * in.... - */ -#define serial_inp(up, offset) serial_in(up, offset) -#define serial_outp(up, offset, value) serial_out(up, offset, value) - - -/* - * For the 16C950 - */ -static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value) -{ - serial_out(up, UART_SCR, offset); - serial_out(up, UART_ICR, value); -} - -#if 0 /* Unused currently */ -static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset) -{ - unsigned int value; - - serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); - serial_out(up, UART_SCR, offset); - value = serial_in(up, UART_ICR); - serial_icr_write(up, UART_ACR, up->acr); - - return value; -} -#endif - -#ifdef CONFIG_SERIAL_8250_RSA -/* - * Attempts to turn on the RSA FIFO. Returns zero on failure. - * We set the port uart clock rate if we succeed. - */ -static int __enable_rsa(struct uart_sunsu_port *up) -{ - unsigned char mode; - int result; - - mode = serial_inp(up, UART_RSA_MSR); - result = mode & UART_RSA_MSR_FIFO; - - if (!result) { - serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); - mode = serial_inp(up, UART_RSA_MSR); - result = mode & UART_RSA_MSR_FIFO; - } - - if (result) - up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; - - return result; -} - -static void enable_rsa(struct uart_sunsu_port *up) -{ - if (up->port.type == PORT_RSA) { - if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { - spin_lock_irq(&up->port.lock); - __enable_rsa(up); - spin_unlock_irq(&up->port.lock); - } - if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) - serial_outp(up, UART_RSA_FRR, 0); - } -} - -/* - * Attempts to turn off the RSA FIFO. Returns zero on failure. - * It is unknown why interrupts were disabled in here. However, - * the caller is expected to preserve this behaviour by grabbing - * the spinlock before calling this function. - */ -static void disable_rsa(struct uart_sunsu_port *up) -{ - unsigned char mode; - int result; - - if (up->port.type == PORT_RSA && - up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { - spin_lock_irq(&up->port.lock); - - mode = serial_inp(up, UART_RSA_MSR); - result = !(mode & UART_RSA_MSR_FIFO); - - if (!result) { - serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); - mode = serial_inp(up, UART_RSA_MSR); - result = !(mode & UART_RSA_MSR_FIFO); - } - - if (result) - up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; - spin_unlock_irq(&up->port.lock); - } -} -#endif /* CONFIG_SERIAL_8250_RSA */ - -static inline void __stop_tx(struct uart_sunsu_port *p) -{ - if (p->ier & UART_IER_THRI) { - p->ier &= ~UART_IER_THRI; - serial_out(p, UART_IER, p->ier); - } -} - -static void sunsu_stop_tx(struct uart_port *port) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - - __stop_tx(up); - - /* - * We really want to stop the transmitter from sending. - */ - if (up->port.type == PORT_16C950) { - up->acr |= UART_ACR_TXDIS; - serial_icr_write(up, UART_ACR, up->acr); - } -} - -static void sunsu_start_tx(struct uart_port *port) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - - if (!(up->ier & UART_IER_THRI)) { - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, up->ier); - } - - /* - * Re-enable the transmitter if we disabled it. - */ - if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { - up->acr &= ~UART_ACR_TXDIS; - serial_icr_write(up, UART_ACR, up->acr); - } -} - -static void sunsu_stop_rx(struct uart_port *port) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - - up->ier &= ~UART_IER_RLSI; - up->port.read_status_mask &= ~UART_LSR_DR; - serial_out(up, UART_IER, up->ier); -} - -static void sunsu_enable_ms(struct uart_port *port) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - up->ier |= UART_IER_MSI; - serial_out(up, UART_IER, up->ier); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static struct tty_struct * -receive_chars(struct uart_sunsu_port *up, unsigned char *status) -{ - struct tty_struct *tty = up->port.state->port.tty; - unsigned char ch, flag; - int max_count = 256; - int saw_console_brk = 0; - - do { - ch = serial_inp(up, UART_RX); - flag = TTY_NORMAL; - up->port.icount.rx++; - - if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | - UART_LSR_FE | UART_LSR_OE))) { - /* - * For statistics only - */ - if (*status & UART_LSR_BI) { - *status &= ~(UART_LSR_FE | UART_LSR_PE); - up->port.icount.brk++; - if (up->port.cons != NULL && - up->port.line == up->port.cons->index) - saw_console_brk = 1; - /* - * We do the SysRQ and SAK checking - * here because otherwise the break - * may get masked by ignore_status_mask - * or read_status_mask. - */ - if (uart_handle_break(&up->port)) - goto ignore_char; - } else if (*status & UART_LSR_PE) - up->port.icount.parity++; - else if (*status & UART_LSR_FE) - up->port.icount.frame++; - if (*status & UART_LSR_OE) - up->port.icount.overrun++; - - /* - * Mask off conditions which should be ingored. - */ - *status &= up->port.read_status_mask; - - if (up->port.cons != NULL && - up->port.line == up->port.cons->index) { - /* Recover the break flag from console xmit */ - *status |= up->lsr_break_flag; - up->lsr_break_flag = 0; - } - - if (*status & UART_LSR_BI) { - flag = TTY_BREAK; - } else if (*status & UART_LSR_PE) - flag = TTY_PARITY; - else if (*status & UART_LSR_FE) - flag = TTY_FRAME; - } - if (uart_handle_sysrq_char(&up->port, ch)) - goto ignore_char; - if ((*status & up->port.ignore_status_mask) == 0) - tty_insert_flip_char(tty, ch, flag); - if (*status & UART_LSR_OE) - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character. - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - ignore_char: - *status = serial_inp(up, UART_LSR); - } while ((*status & UART_LSR_DR) && (max_count-- > 0)); - - if (saw_console_brk) - sun_do_break(); - - return tty; -} - -static void transmit_chars(struct uart_sunsu_port *up) -{ - struct circ_buf *xmit = &up->port.state->xmit; - int count; - - if (up->port.x_char) { - serial_outp(up, UART_TX, up->port.x_char); - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - if (uart_tx_stopped(&up->port)) { - sunsu_stop_tx(&up->port); - return; - } - if (uart_circ_empty(xmit)) { - __stop_tx(up); - return; - } - - count = up->port.fifosize; - do { - serial_out(up, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - if (uart_circ_empty(xmit)) - __stop_tx(up); -} - -static void check_modem_status(struct uart_sunsu_port *up) -{ - int status; - - status = serial_in(up, UART_MSR); - - if ((status & UART_MSR_ANY_DELTA) == 0) - return; - - if (status & UART_MSR_TERI) - up->port.icount.rng++; - if (status & UART_MSR_DDSR) - up->port.icount.dsr++; - if (status & UART_MSR_DDCD) - uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); - if (status & UART_MSR_DCTS) - uart_handle_cts_change(&up->port, status & UART_MSR_CTS); - - wake_up_interruptible(&up->port.state->port.delta_msr_wait); -} - -static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id) -{ - struct uart_sunsu_port *up = dev_id; - unsigned long flags; - unsigned char status; - - spin_lock_irqsave(&up->port.lock, flags); - - do { - struct tty_struct *tty; - - status = serial_inp(up, UART_LSR); - tty = NULL; - if (status & UART_LSR_DR) - tty = receive_chars(up, &status); - check_modem_status(up); - if (status & UART_LSR_THRE) - transmit_chars(up); - - spin_unlock_irqrestore(&up->port.lock, flags); - - if (tty) - tty_flip_buffer_push(tty); - - spin_lock_irqsave(&up->port.lock, flags); - - } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)); - - spin_unlock_irqrestore(&up->port.lock, flags); - - return IRQ_HANDLED; -} - -/* Separate interrupt handling path for keyboard/mouse ports. */ - -static void -sunsu_change_speed(struct uart_port *port, unsigned int cflag, - unsigned int iflag, unsigned int quot); - -static void sunsu_change_mouse_baud(struct uart_sunsu_port *up) -{ - unsigned int cur_cflag = up->cflag; - int quot, new_baud; - - up->cflag &= ~CBAUD; - up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud); - - quot = up->port.uartclk / (16 * new_baud); - - sunsu_change_speed(&up->port, up->cflag, 0, quot); -} - -static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break) -{ - do { - unsigned char ch = serial_inp(up, UART_RX); - - /* Stop-A is handled by drivers/char/keyboard.c now. */ - if (up->su_type == SU_PORT_KBD) { -#ifdef CONFIG_SERIO - serio_interrupt(&up->serio, ch, 0); -#endif - } else if (up->su_type == SU_PORT_MS) { - int ret = suncore_mouse_baud_detection(ch, is_break); - - switch (ret) { - case 2: - sunsu_change_mouse_baud(up); - /* fallthru */ - case 1: - break; - - case 0: -#ifdef CONFIG_SERIO - serio_interrupt(&up->serio, ch, 0); -#endif - break; - }; - } - } while (serial_in(up, UART_LSR) & UART_LSR_DR); -} - -static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id) -{ - struct uart_sunsu_port *up = dev_id; - - if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) { - unsigned char status = serial_inp(up, UART_LSR); - - if ((status & UART_LSR_DR) || (status & UART_LSR_BI)) - receive_kbd_ms_chars(up, (status & UART_LSR_BI) != 0); - } - - return IRQ_HANDLED; -} - -static unsigned int sunsu_tx_empty(struct uart_port *port) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&up->port.lock, flags); - ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; - spin_unlock_irqrestore(&up->port.lock, flags); - - return ret; -} - -static unsigned int sunsu_get_mctrl(struct uart_port *port) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned char status; - unsigned int ret; - - status = serial_in(up, UART_MSR); - - ret = 0; - if (status & UART_MSR_DCD) - ret |= TIOCM_CAR; - if (status & UART_MSR_RI) - ret |= TIOCM_RNG; - if (status & UART_MSR_DSR) - ret |= TIOCM_DSR; - if (status & UART_MSR_CTS) - ret |= TIOCM_CTS; - return ret; -} - -static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned char mcr = 0; - - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - serial_out(up, UART_MCR, mcr); -} - -static void sunsu_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned long flags; - - spin_lock_irqsave(&up->port.lock, flags); - if (break_state == -1) - up->lcr |= UART_LCR_SBC; - else - up->lcr &= ~UART_LCR_SBC; - serial_out(up, UART_LCR, up->lcr); - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static int sunsu_startup(struct uart_port *port) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned long flags; - int retval; - - if (up->port.type == PORT_16C950) { - /* Wake up and initialize UART */ - up->acr = 0; - serial_outp(up, UART_LCR, 0xBF); - serial_outp(up, UART_EFR, UART_EFR_ECB); - serial_outp(up, UART_IER, 0); - serial_outp(up, UART_LCR, 0); - serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ - serial_outp(up, UART_LCR, 0xBF); - serial_outp(up, UART_EFR, UART_EFR_ECB); - serial_outp(up, UART_LCR, 0); - } - -#ifdef CONFIG_SERIAL_8250_RSA - /* - * If this is an RSA port, see if we can kick it up to the - * higher speed clock. - */ - enable_rsa(up); -#endif - - /* - * Clear the FIFO buffers and disable them. - * (they will be reenabled in set_termios()) - */ - if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) { - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); - serial_outp(up, UART_FCR, 0); - } - - /* - * Clear the interrupt registers. - */ - (void) serial_inp(up, UART_LSR); - (void) serial_inp(up, UART_RX); - (void) serial_inp(up, UART_IIR); - (void) serial_inp(up, UART_MSR); - - /* - * At this point, there's no way the LSR could still be 0xff; - * if it is, then bail out, because there's likely no UART - * here. - */ - if (!(up->port.flags & UPF_BUGGY_UART) && - (serial_inp(up, UART_LSR) == 0xff)) { - printk("ttyS%d: LSR safety check engaged!\n", up->port.line); - return -ENODEV; - } - - if (up->su_type != SU_PORT_PORT) { - retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt, - IRQF_SHARED, su_typev[up->su_type], up); - } else { - retval = request_irq(up->port.irq, sunsu_serial_interrupt, - IRQF_SHARED, su_typev[up->su_type], up); - } - if (retval) { - printk("su: Cannot register IRQ %d\n", up->port.irq); - return retval; - } - - /* - * Now, initialize the UART - */ - serial_outp(up, UART_LCR, UART_LCR_WLEN8); - - spin_lock_irqsave(&up->port.lock, flags); - - up->port.mctrl |= TIOCM_OUT2; - - sunsu_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Finally, enable interrupts. Note: Modem status interrupts - * are set via set_termios(), which will be occurring imminently - * anyway, so we don't enable them here. - */ - up->ier = UART_IER_RLSI | UART_IER_RDI; - serial_outp(up, UART_IER, up->ier); - - if (up->port.flags & UPF_FOURPORT) { - unsigned int icp; - /* - * Enable interrupts on the AST Fourport board - */ - icp = (up->port.iobase & 0xfe0) | 0x01f; - outb_p(0x80, icp); - (void) inb_p(icp); - } - - /* - * And clear the interrupt registers again for luck. - */ - (void) serial_inp(up, UART_LSR); - (void) serial_inp(up, UART_RX); - (void) serial_inp(up, UART_IIR); - (void) serial_inp(up, UART_MSR); - - return 0; -} - -static void sunsu_shutdown(struct uart_port *port) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned long flags; - - /* - * Disable interrupts from this port - */ - up->ier = 0; - serial_outp(up, UART_IER, 0); - - spin_lock_irqsave(&up->port.lock, flags); - if (up->port.flags & UPF_FOURPORT) { - /* reset interrupts on the AST Fourport board */ - inb((up->port.iobase & 0xfe0) | 0x1f); - up->port.mctrl |= TIOCM_OUT1; - } else - up->port.mctrl &= ~TIOCM_OUT2; - - sunsu_set_mctrl(&up->port, up->port.mctrl); - spin_unlock_irqrestore(&up->port.lock, flags); - - /* - * Disable break condition and FIFOs - */ - serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT); - serial_outp(up, UART_FCR, 0); - -#ifdef CONFIG_SERIAL_8250_RSA - /* - * Reset the RSA board back to 115kbps compat mode. - */ - disable_rsa(up); -#endif - - /* - * Read data port to reset things. - */ - (void) serial_in(up, UART_RX); - - free_irq(up->port.irq, up); -} - -static void -sunsu_change_speed(struct uart_port *port, unsigned int cflag, - unsigned int iflag, unsigned int quot) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - unsigned char cval, fcr = 0; - unsigned long flags; - - switch (cflag & CSIZE) { - case CS5: - cval = 0x00; - break; - case CS6: - cval = 0x01; - break; - case CS7: - cval = 0x02; - break; - default: - case CS8: - cval = 0x03; - break; - } - - if (cflag & CSTOPB) - cval |= 0x04; - if (cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(cflag & PARODD)) - cval |= UART_LCR_EPAR; -#ifdef CMSPAR - if (cflag & CMSPAR) - cval |= UART_LCR_SPAR; -#endif - - /* - * Work around a bug in the Oxford Semiconductor 952 rev B - * chip which causes it to seriously miscalculate baud rates - * when DLL is 0. - */ - if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 && - up->rev == 0x5201) - quot ++; - - if (uart_config[up->port.type].flags & UART_USE_FIFO) { - if ((up->port.uartclk / quot) < (2400 * 16)) - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; -#ifdef CONFIG_SERIAL_8250_RSA - else if (up->port.type == PORT_RSA) - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14; -#endif - else - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8; - } - if (up->port.type == PORT_16750) - fcr |= UART_FCR7_64BYTE; - - /* - * Ok, we're now changing the port state. Do it with - * interrupts disabled. - */ - spin_lock_irqsave(&up->port.lock, flags); - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, cflag, (port->uartclk / (16 * quot))); - - up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (iflag & INPCK) - up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= UART_LSR_BI; - - /* - * Characteres to ignore - */ - up->port.ignore_status_mask = 0; - if (iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - if (iflag & IGNBRK) { - up->port.ignore_status_mask |= UART_LSR_BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (iflag & IGNPAR) - up->port.ignore_status_mask |= UART_LSR_OE; - } - - /* - * ignore all characters if CREAD is not set - */ - if ((cflag & CREAD) == 0) - up->port.ignore_status_mask |= UART_LSR_DR; - - /* - * CTS flow control flag and modem status interrupts - */ - up->ier &= ~UART_IER_MSI; - if (UART_ENABLE_MS(&up->port, cflag)) - up->ier |= UART_IER_MSI; - - serial_out(up, UART_IER, up->ier); - - if (uart_config[up->port.type].flags & UART_STARTECH) { - serial_outp(up, UART_LCR, 0xBF); - serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0); - } - serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ - serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */ - serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */ - if (up->port.type == PORT_16750) - serial_outp(up, UART_FCR, fcr); /* set fcr */ - serial_outp(up, UART_LCR, cval); /* reset DLAB */ - up->lcr = cval; /* Save LCR */ - if (up->port.type != PORT_16750) { - if (fcr & UART_FCR_ENABLE_FIFO) { - /* emulated UARTs (Lucent Venus 167x) need two steps */ - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - } - serial_outp(up, UART_FCR, fcr); /* set fcr */ - } - - up->cflag = cflag; - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static void -sunsu_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned int baud, quot; - - /* - * Ask the core to calculate the divisor for us. - */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot); -} - -static void sunsu_release_port(struct uart_port *port) -{ -} - -static int sunsu_request_port(struct uart_port *port) -{ - return 0; -} - -static void sunsu_config_port(struct uart_port *port, int flags) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; - - if (flags & UART_CONFIG_TYPE) { - /* - * We are supposed to call autoconfig here, but this requires - * splitting all the OBP probing crap from the UART probing. - * We'll do it when we kill sunsu.c altogether. - */ - port->type = up->type_probed; /* XXX */ - } -} - -static int -sunsu_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return -EINVAL; -} - -static const char * -sunsu_type(struct uart_port *port) -{ - int type = port->type; - - if (type >= ARRAY_SIZE(uart_config)) - type = 0; - return uart_config[type].name; -} - -static struct uart_ops sunsu_pops = { - .tx_empty = sunsu_tx_empty, - .set_mctrl = sunsu_set_mctrl, - .get_mctrl = sunsu_get_mctrl, - .stop_tx = sunsu_stop_tx, - .start_tx = sunsu_start_tx, - .stop_rx = sunsu_stop_rx, - .enable_ms = sunsu_enable_ms, - .break_ctl = sunsu_break_ctl, - .startup = sunsu_startup, - .shutdown = sunsu_shutdown, - .set_termios = sunsu_set_termios, - .type = sunsu_type, - .release_port = sunsu_release_port, - .request_port = sunsu_request_port, - .config_port = sunsu_config_port, - .verify_port = sunsu_verify_port, -}; - -#define UART_NR 4 - -static struct uart_sunsu_port sunsu_ports[UART_NR]; - -#ifdef CONFIG_SERIO - -static DEFINE_SPINLOCK(sunsu_serio_lock); - -static int sunsu_serio_write(struct serio *serio, unsigned char ch) -{ - struct uart_sunsu_port *up = serio->port_data; - unsigned long flags; - int lsr; - - spin_lock_irqsave(&sunsu_serio_lock, flags); - - do { - lsr = serial_in(up, UART_LSR); - } while (!(lsr & UART_LSR_THRE)); - - /* Send the character out. */ - serial_out(up, UART_TX, ch); - - spin_unlock_irqrestore(&sunsu_serio_lock, flags); - - return 0; -} - -static int sunsu_serio_open(struct serio *serio) -{ - struct uart_sunsu_port *up = serio->port_data; - unsigned long flags; - int ret; - - spin_lock_irqsave(&sunsu_serio_lock, flags); - if (!up->serio_open) { - up->serio_open = 1; - ret = 0; - } else - ret = -EBUSY; - spin_unlock_irqrestore(&sunsu_serio_lock, flags); - - return ret; -} - -static void sunsu_serio_close(struct serio *serio) -{ - struct uart_sunsu_port *up = serio->port_data; - unsigned long flags; - - spin_lock_irqsave(&sunsu_serio_lock, flags); - up->serio_open = 0; - spin_unlock_irqrestore(&sunsu_serio_lock, flags); -} - -#endif /* CONFIG_SERIO */ - -static void sunsu_autoconfig(struct uart_sunsu_port *up) -{ - unsigned char status1, status2, scratch, scratch2, scratch3; - unsigned char save_lcr, save_mcr; - unsigned long flags; - - if (up->su_type == SU_PORT_NONE) - return; - - up->type_probed = PORT_UNKNOWN; - up->port.iotype = UPIO_MEM; - - spin_lock_irqsave(&up->port.lock, flags); - - if (!(up->port.flags & UPF_BUGGY_UART)) { - /* - * Do a simple existence test first; if we fail this, there's - * no point trying anything else. - * - * 0x80 is used as a nonsense port to prevent against false - * positives due to ISA bus float. The assumption is that - * 0x80 is a non-existent port; which should be safe since - * include/asm/io.h also makes this assumption. - */ - scratch = serial_inp(up, UART_IER); - serial_outp(up, UART_IER, 0); -#ifdef __i386__ - outb(0xff, 0x080); -#endif - scratch2 = serial_inp(up, UART_IER); - serial_outp(up, UART_IER, 0x0f); -#ifdef __i386__ - outb(0, 0x080); -#endif - scratch3 = serial_inp(up, UART_IER); - serial_outp(up, UART_IER, scratch); - if (scratch2 != 0 || scratch3 != 0x0F) - goto out; /* We failed; there's nothing here */ - } - - save_mcr = serial_in(up, UART_MCR); - save_lcr = serial_in(up, UART_LCR); - - /* - * Check to see if a UART is really there. Certain broken - * internal modems based on the Rockwell chipset fail this - * test, because they apparently don't implement the loopback - * test mode. So this test is skipped on the COM 1 through - * COM 4 ports. This *should* be safe, since no board - * manufacturer would be stupid enough to design a board - * that conflicts with COM 1-4 --- we hope! - */ - if (!(up->port.flags & UPF_SKIP_TEST)) { - serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); - status1 = serial_inp(up, UART_MSR) & 0xF0; - serial_outp(up, UART_MCR, save_mcr); - if (status1 != 0x90) - goto out; /* We failed loopback test */ - } - serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */ - serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */ - serial_outp(up, UART_LCR, 0); - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - scratch = serial_in(up, UART_IIR) >> 6; - switch (scratch) { - case 0: - up->port.type = PORT_16450; - break; - case 1: - up->port.type = PORT_UNKNOWN; - break; - case 2: - up->port.type = PORT_16550; - break; - case 3: - up->port.type = PORT_16550A; - break; - } - if (up->port.type == PORT_16550A) { - /* Check for Startech UART's */ - serial_outp(up, UART_LCR, UART_LCR_DLAB); - if (serial_in(up, UART_EFR) == 0) { - up->port.type = PORT_16650; - } else { - serial_outp(up, UART_LCR, 0xBF); - if (serial_in(up, UART_EFR) == 0) - up->port.type = PORT_16650V2; - } - } - if (up->port.type == PORT_16550A) { - /* Check for TI 16750 */ - serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB); - serial_outp(up, UART_FCR, - UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); - scratch = serial_in(up, UART_IIR) >> 5; - if (scratch == 7) { - /* - * If this is a 16750, and not a cheap UART - * clone, then it should only go into 64 byte - * mode if the UART_FCR7_64BYTE bit was set - * while UART_LCR_DLAB was latched. - */ - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - serial_outp(up, UART_LCR, 0); - serial_outp(up, UART_FCR, - UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); - scratch = serial_in(up, UART_IIR) >> 5; - if (scratch == 6) - up->port.type = PORT_16750; - } - serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); - } - serial_outp(up, UART_LCR, save_lcr); - if (up->port.type == PORT_16450) { - scratch = serial_in(up, UART_SCR); - serial_outp(up, UART_SCR, 0xa5); - status1 = serial_in(up, UART_SCR); - serial_outp(up, UART_SCR, 0x5a); - status2 = serial_in(up, UART_SCR); - serial_outp(up, UART_SCR, scratch); - - if ((status1 != 0xa5) || (status2 != 0x5a)) - up->port.type = PORT_8250; - } - - up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; - - if (up->port.type == PORT_UNKNOWN) - goto out; - up->type_probed = up->port.type; /* XXX */ - - /* - * Reset the UART. - */ -#ifdef CONFIG_SERIAL_8250_RSA - if (up->port.type == PORT_RSA) - serial_outp(up, UART_RSA_FRR, 0); -#endif - serial_outp(up, UART_MCR, save_mcr); - serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT)); - serial_outp(up, UART_FCR, 0); - (void)serial_in(up, UART_RX); - serial_outp(up, UART_IER, 0); - -out: - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static struct uart_driver sunsu_reg = { - .owner = THIS_MODULE, - .driver_name = "sunsu", - .dev_name = "ttyS", - .major = TTY_MAJOR, -}; - -static int __devinit sunsu_kbd_ms_init(struct uart_sunsu_port *up) -{ - int quot, baud; -#ifdef CONFIG_SERIO - struct serio *serio; -#endif - - if (up->su_type == SU_PORT_KBD) { - up->cflag = B1200 | CS8 | CLOCAL | CREAD; - baud = 1200; - } else { - up->cflag = B4800 | CS8 | CLOCAL | CREAD; - baud = 4800; - } - quot = up->port.uartclk / (16 * baud); - - sunsu_autoconfig(up); - if (up->port.type == PORT_UNKNOWN) - return -ENODEV; - - printk("%s: %s port at %llx, irq %u\n", - up->port.dev->of_node->full_name, - (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse", - (unsigned long long) up->port.mapbase, - up->port.irq); - -#ifdef CONFIG_SERIO - serio = &up->serio; - serio->port_data = up; - - serio->id.type = SERIO_RS232; - if (up->su_type == SU_PORT_KBD) { - serio->id.proto = SERIO_SUNKBD; - strlcpy(serio->name, "sukbd", sizeof(serio->name)); - } else { - serio->id.proto = SERIO_SUN; - serio->id.extra = 1; - strlcpy(serio->name, "sums", sizeof(serio->name)); - } - strlcpy(serio->phys, - (!(up->port.line & 1) ? "su/serio0" : "su/serio1"), - sizeof(serio->phys)); - - serio->write = sunsu_serio_write; - serio->open = sunsu_serio_open; - serio->close = sunsu_serio_close; - serio->dev.parent = up->port.dev; - - serio_register_port(serio); -#endif - - sunsu_change_speed(&up->port, up->cflag, 0, quot); - - sunsu_startup(&up->port); - return 0; -} - -/* - * ------------------------------------------------------------ - * Serial console driver - * ------------------------------------------------------------ - */ - -#ifdef CONFIG_SERIAL_SUNSU_CONSOLE - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -/* - * Wait for transmitter & holding register to empty - */ -static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = serial_in(up, UART_LSR); - - if (status & UART_LSR_BI) - up->lsr_break_flag = UART_LSR_BI; - - if (--tmout == 0) - break; - udelay(1); - } while ((status & BOTH_EMPTY) != BOTH_EMPTY); - - /* Wait up to 1s for flow control if necessary */ - if (up->port.flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout && - ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) - udelay(1); - } -} - -static void sunsu_console_putchar(struct uart_port *port, int ch) -{ - struct uart_sunsu_port *up = (struct uart_sunsu_port *)port; - - wait_for_xmitr(up); - serial_out(up, UART_TX, ch); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - */ -static void sunsu_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_sunsu_port *up = &sunsu_ports[co->index]; - unsigned long flags; - unsigned int ier; - int locked = 1; - - local_irq_save(flags); - if (up->port.sysrq) { - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&up->port.lock); - } else - spin_lock(&up->port.lock); - - /* - * First save the UER then disable the interrupts - */ - ier = serial_in(up, UART_IER); - serial_out(up, UART_IER, 0); - - uart_console_write(&up->port, s, count, sunsu_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and restore the IER - */ - wait_for_xmitr(up); - serial_out(up, UART_IER, ier); - - if (locked) - spin_unlock(&up->port.lock); - local_irq_restore(flags); -} - -/* - * Setup initial baud/bits/parity. We do two things here: - * - construct a cflag setting for the first su_open() - * - initialize the serial port - * Return non-zero if we didn't find a serial port. - */ -static int __init sunsu_console_setup(struct console *co, char *options) -{ - static struct ktermios dummy; - struct ktermios termios; - struct uart_port *port; - - printk("Console: ttyS%d (SU)\n", - (sunsu_reg.minor - 64) + co->index); - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index >= UART_NR) - co->index = 0; - port = &sunsu_ports[co->index].port; - - /* - * Temporary fix. - */ - spin_lock_init(&port->lock); - - /* Get firmware console settings. */ - sunserial_console_termios(co, port->dev->of_node); - - memset(&termios, 0, sizeof(struct ktermios)); - termios.c_cflag = co->cflag; - port->mctrl |= TIOCM_DTR; - port->ops->set_termios(port, &termios, &dummy); - - return 0; -} - -static struct console sunsu_console = { - .name = "ttyS", - .write = sunsu_console_write, - .device = uart_console_device, - .setup = sunsu_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sunsu_reg, -}; - -/* - * Register console. - */ - -static inline struct console *SUNSU_CONSOLE(void) -{ - return &sunsu_console; -} -#else -#define SUNSU_CONSOLE() (NULL) -#define sunsu_serial_console_init() do { } while (0) -#endif - -static enum su_type __devinit su_get_type(struct device_node *dp) -{ - struct device_node *ap = of_find_node_by_path("/aliases"); - - if (ap) { - const char *keyb = of_get_property(ap, "keyboard", NULL); - const char *ms = of_get_property(ap, "mouse", NULL); - - if (keyb) { - if (dp == of_find_node_by_path(keyb)) - return SU_PORT_KBD; - } - if (ms) { - if (dp == of_find_node_by_path(ms)) - return SU_PORT_MS; - } - } - - return SU_PORT_PORT; -} - -static int __devinit su_probe(struct platform_device *op, const struct of_device_id *match) -{ - static int inst; - struct device_node *dp = op->dev.of_node; - struct uart_sunsu_port *up; - struct resource *rp; - enum su_type type; - bool ignore_line; - int err; - - type = su_get_type(dp); - if (type == SU_PORT_PORT) { - if (inst >= UART_NR) - return -EINVAL; - up = &sunsu_ports[inst]; - } else { - up = kzalloc(sizeof(*up), GFP_KERNEL); - if (!up) - return -ENOMEM; - } - - up->port.line = inst; - - spin_lock_init(&up->port.lock); - - up->su_type = type; - - rp = &op->resource[0]; - up->port.mapbase = rp->start; - up->reg_size = (rp->end - rp->start) + 1; - up->port.membase = of_ioremap(rp, 0, up->reg_size, "su"); - if (!up->port.membase) { - if (type != SU_PORT_PORT) - kfree(up); - return -ENOMEM; - } - - up->port.irq = op->archdata.irqs[0]; - - up->port.dev = &op->dev; - - up->port.type = PORT_UNKNOWN; - up->port.uartclk = (SU_BASE_BAUD * 16); - - err = 0; - if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) { - err = sunsu_kbd_ms_init(up); - if (err) { - of_iounmap(&op->resource[0], - up->port.membase, up->reg_size); - kfree(up); - return err; - } - dev_set_drvdata(&op->dev, up); - - return 0; - } - - up->port.flags |= UPF_BOOT_AUTOCONF; - - sunsu_autoconfig(up); - - err = -ENODEV; - if (up->port.type == PORT_UNKNOWN) - goto out_unmap; - - up->port.ops = &sunsu_pops; - - ignore_line = false; - if (!strcmp(dp->name, "rsc-console") || - !strcmp(dp->name, "lom-console")) - ignore_line = true; - - sunserial_console_match(SUNSU_CONSOLE(), dp, - &sunsu_reg, up->port.line, - ignore_line); - err = uart_add_one_port(&sunsu_reg, &up->port); - if (err) - goto out_unmap; - - dev_set_drvdata(&op->dev, up); - - inst++; - - return 0; - -out_unmap: - of_iounmap(&op->resource[0], up->port.membase, up->reg_size); - return err; -} - -static int __devexit su_remove(struct platform_device *op) -{ - struct uart_sunsu_port *up = dev_get_drvdata(&op->dev); - bool kbdms = false; - - if (up->su_type == SU_PORT_MS || - up->su_type == SU_PORT_KBD) - kbdms = true; - - if (kbdms) { -#ifdef CONFIG_SERIO - serio_unregister_port(&up->serio); -#endif - } else if (up->port.type != PORT_UNKNOWN) - uart_remove_one_port(&sunsu_reg, &up->port); - - if (up->port.membase) - of_iounmap(&op->resource[0], up->port.membase, up->reg_size); - - if (kbdms) - kfree(up); - - dev_set_drvdata(&op->dev, NULL); - - return 0; -} - -static const struct of_device_id su_match[] = { - { - .name = "su", - }, - { - .name = "su_pnp", - }, - { - .name = "serial", - .compatible = "su", - }, - { - .type = "serial", - .compatible = "su", - }, - {}, -}; -MODULE_DEVICE_TABLE(of, su_match); - -static struct of_platform_driver su_driver = { - .driver = { - .name = "su", - .owner = THIS_MODULE, - .of_match_table = su_match, - }, - .probe = su_probe, - .remove = __devexit_p(su_remove), -}; - -static int __init sunsu_init(void) -{ - struct device_node *dp; - int err; - int num_uart = 0; - - for_each_node_by_name(dp, "su") { - if (su_get_type(dp) == SU_PORT_PORT) - num_uart++; - } - for_each_node_by_name(dp, "su_pnp") { - if (su_get_type(dp) == SU_PORT_PORT) - num_uart++; - } - for_each_node_by_name(dp, "serial") { - if (of_device_is_compatible(dp, "su")) { - if (su_get_type(dp) == SU_PORT_PORT) - num_uart++; - } - } - for_each_node_by_type(dp, "serial") { - if (of_device_is_compatible(dp, "su")) { - if (su_get_type(dp) == SU_PORT_PORT) - num_uart++; - } - } - - if (num_uart) { - err = sunserial_register_minors(&sunsu_reg, num_uart); - if (err) - return err; - } - - err = of_register_platform_driver(&su_driver); - if (err && num_uart) - sunserial_unregister_minors(&sunsu_reg, num_uart); - - return err; -} - -static void __exit sunsu_exit(void) -{ - if (sunsu_reg.nr) - sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr); -} - -module_init(sunsu_init); -module_exit(sunsu_exit); - -MODULE_AUTHOR("Eddie C. Dost, Peter Zaitcev, and David S. Miller"); -MODULE_DESCRIPTION("Sun SU serial port driver"); -MODULE_VERSION("2.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c deleted file mode 100644 index c1967ac1c07f..000000000000 --- a/drivers/serial/sunzilog.c +++ /dev/null @@ -1,1655 +0,0 @@ -/* sunzilog.c: Zilog serial driver for Sparc systems. - * - * Driver for Zilog serial chips found on Sun workstations and - * servers. This driver could actually be made more generic. - * - * This is based on the old drivers/sbus/char/zs.c code. A lot - * of code has been simply moved over directly from there but - * much has been rewritten. Credits therefore go out to Eddie - * C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell for their - * work there. - * - * Copyright (C) 2002, 2006, 2007 David S. Miller (davem@davemloft.net) - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_SERIO -#include -#endif -#include -#include - -#include -#include -#include - -#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include - -#include "suncore.h" -#include "sunzilog.h" - -/* On 32-bit sparcs we need to delay after register accesses - * to accommodate sun4 systems, but we do not need to flush writes. - * On 64-bit sparc we only need to flush single writes to ensure - * completion. - */ -#ifndef CONFIG_SPARC64 -#define ZSDELAY() udelay(5) -#define ZSDELAY_LONG() udelay(20) -#define ZS_WSYNC(channel) do { } while (0) -#else -#define ZSDELAY() -#define ZSDELAY_LONG() -#define ZS_WSYNC(__channel) \ - readb(&((__channel)->control)) -#endif - -#define ZS_CLOCK 4915200 /* Zilog input clock rate. */ -#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */ - -/* - * We wrap our port structure around the generic uart_port. - */ -struct uart_sunzilog_port { - struct uart_port port; - - /* IRQ servicing chain. */ - struct uart_sunzilog_port *next; - - /* Current values of Zilog write registers. */ - unsigned char curregs[NUM_ZSREGS]; - - unsigned int flags; -#define SUNZILOG_FLAG_CONS_KEYB 0x00000001 -#define SUNZILOG_FLAG_CONS_MOUSE 0x00000002 -#define SUNZILOG_FLAG_IS_CONS 0x00000004 -#define SUNZILOG_FLAG_IS_KGDB 0x00000008 -#define SUNZILOG_FLAG_MODEM_STATUS 0x00000010 -#define SUNZILOG_FLAG_IS_CHANNEL_A 0x00000020 -#define SUNZILOG_FLAG_REGS_HELD 0x00000040 -#define SUNZILOG_FLAG_TX_STOPPED 0x00000080 -#define SUNZILOG_FLAG_TX_ACTIVE 0x00000100 -#define SUNZILOG_FLAG_ESCC 0x00000200 -#define SUNZILOG_FLAG_ISR_HANDLER 0x00000400 - - unsigned int cflag; - - unsigned char parity_mask; - unsigned char prev_status; - -#ifdef CONFIG_SERIO - struct serio serio; - int serio_open; -#endif -}; - -static void sunzilog_putchar(struct uart_port *port, int ch); - -#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase)) -#define UART_ZILOG(PORT) ((struct uart_sunzilog_port *)(PORT)) - -#define ZS_IS_KEYB(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_KEYB) -#define ZS_IS_MOUSE(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_MOUSE) -#define ZS_IS_CONS(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CONS) -#define ZS_IS_KGDB(UP) ((UP)->flags & SUNZILOG_FLAG_IS_KGDB) -#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS) -#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CHANNEL_A) -#define ZS_REGS_HELD(UP) ((UP)->flags & SUNZILOG_FLAG_REGS_HELD) -#define ZS_TX_STOPPED(UP) ((UP)->flags & SUNZILOG_FLAG_TX_STOPPED) -#define ZS_TX_ACTIVE(UP) ((UP)->flags & SUNZILOG_FLAG_TX_ACTIVE) - -/* Reading and writing Zilog8530 registers. The delays are to make this - * driver work on the Sun4 which needs a settling delay after each chip - * register access, other machines handle this in hardware via auxiliary - * flip-flops which implement the settle time we do in software. - * - * The port lock must be held and local IRQs must be disabled - * when {read,write}_zsreg is invoked. - */ -static unsigned char read_zsreg(struct zilog_channel __iomem *channel, - unsigned char reg) -{ - unsigned char retval; - - writeb(reg, &channel->control); - ZSDELAY(); - retval = readb(&channel->control); - ZSDELAY(); - - return retval; -} - -static void write_zsreg(struct zilog_channel __iomem *channel, - unsigned char reg, unsigned char value) -{ - writeb(reg, &channel->control); - ZSDELAY(); - writeb(value, &channel->control); - ZSDELAY(); -} - -static void sunzilog_clear_fifo(struct zilog_channel __iomem *channel) -{ - int i; - - for (i = 0; i < 32; i++) { - unsigned char regval; - - regval = readb(&channel->control); - ZSDELAY(); - if (regval & Rx_CH_AV) - break; - - regval = read_zsreg(channel, R1); - readb(&channel->data); - ZSDELAY(); - - if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) { - writeb(ERR_RES, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - } - } -} - -/* This function must only be called when the TX is not busy. The UART - * port lock must be held and local interrupts disabled. - */ -static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs) -{ - int i; - int escc; - unsigned char r15; - - /* Let pending transmits finish. */ - for (i = 0; i < 1000; i++) { - unsigned char stat = read_zsreg(channel, R1); - if (stat & ALL_SNT) - break; - udelay(100); - } - - writeb(ERR_RES, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - - sunzilog_clear_fifo(channel); - - /* Disable all interrupts. */ - write_zsreg(channel, R1, - regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); - - /* Set parity, sync config, stop bits, and clock divisor. */ - write_zsreg(channel, R4, regs[R4]); - - /* Set misc. TX/RX control bits. */ - write_zsreg(channel, R10, regs[R10]); - - /* Set TX/RX controls sans the enable bits. */ - write_zsreg(channel, R3, regs[R3] & ~RxENAB); - write_zsreg(channel, R5, regs[R5] & ~TxENAB); - - /* Synchronous mode config. */ - write_zsreg(channel, R6, regs[R6]); - write_zsreg(channel, R7, regs[R7]); - - /* Don't mess with the interrupt vector (R2, unused by us) and - * master interrupt control (R9). We make sure this is setup - * properly at probe time then never touch it again. - */ - - /* Disable baud generator. */ - write_zsreg(channel, R14, regs[R14] & ~BRENAB); - - /* Clock mode control. */ - write_zsreg(channel, R11, regs[R11]); - - /* Lower and upper byte of baud rate generator divisor. */ - write_zsreg(channel, R12, regs[R12]); - write_zsreg(channel, R13, regs[R13]); - - /* Now rewrite R14, with BRENAB (if set). */ - write_zsreg(channel, R14, regs[R14]); - - /* External status interrupt control. */ - write_zsreg(channel, R15, (regs[R15] | WR7pEN) & ~FIFOEN); - - /* ESCC Extension Register */ - r15 = read_zsreg(channel, R15); - if (r15 & 0x01) { - write_zsreg(channel, R7, regs[R7p]); - - /* External status interrupt and FIFO control. */ - write_zsreg(channel, R15, regs[R15] & ~WR7pEN); - escc = 1; - } else { - /* Clear FIFO bit case it is an issue */ - regs[R15] &= ~FIFOEN; - escc = 0; - } - - /* Reset external status interrupts. */ - write_zsreg(channel, R0, RES_EXT_INT); /* First Latch */ - write_zsreg(channel, R0, RES_EXT_INT); /* Second Latch */ - - /* Rewrite R3/R5, this time without enables masked. */ - write_zsreg(channel, R3, regs[R3]); - write_zsreg(channel, R5, regs[R5]); - - /* Rewrite R1, this time without IRQ enabled masked. */ - write_zsreg(channel, R1, regs[R1]); - - return escc; -} - -/* Reprogram the Zilog channel HW registers with the copies found in the - * software state struct. If the transmitter is busy, we defer this update - * until the next TX complete interrupt. Else, we do it right now. - * - * The UART port lock must be held and local interrupts disabled. - */ -static void sunzilog_maybe_update_regs(struct uart_sunzilog_port *up, - struct zilog_channel __iomem *channel) -{ - if (!ZS_REGS_HELD(up)) { - if (ZS_TX_ACTIVE(up)) { - up->flags |= SUNZILOG_FLAG_REGS_HELD; - } else { - __load_zsregs(channel, up->curregs); - } - } -} - -static void sunzilog_change_mouse_baud(struct uart_sunzilog_port *up) -{ - unsigned int cur_cflag = up->cflag; - int brg, new_baud; - - up->cflag &= ~CBAUD; - up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud); - - brg = BPS_TO_BRG(new_baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); - up->curregs[R12] = (brg & 0xff); - up->curregs[R13] = (brg >> 8) & 0xff; - sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(&up->port)); -} - -static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up, - unsigned char ch, int is_break) -{ - if (ZS_IS_KEYB(up)) { - /* Stop-A is handled by drivers/char/keyboard.c now. */ -#ifdef CONFIG_SERIO - if (up->serio_open) - serio_interrupt(&up->serio, ch, 0); -#endif - } else if (ZS_IS_MOUSE(up)) { - int ret = suncore_mouse_baud_detection(ch, is_break); - - switch (ret) { - case 2: - sunzilog_change_mouse_baud(up); - /* fallthru */ - case 1: - break; - - case 0: -#ifdef CONFIG_SERIO - if (up->serio_open) - serio_interrupt(&up->serio, ch, 0); -#endif - break; - }; - } -} - -static struct tty_struct * -sunzilog_receive_chars(struct uart_sunzilog_port *up, - struct zilog_channel __iomem *channel) -{ - struct tty_struct *tty; - unsigned char ch, r1, flag; - - tty = NULL; - if (up->port.state != NULL && /* Unopened serial console */ - up->port.state->port.tty != NULL) /* Keyboard || mouse */ - tty = up->port.state->port.tty; - - for (;;) { - - r1 = read_zsreg(channel, R1); - if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { - writeb(ERR_RES, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - } - - ch = readb(&channel->control); - ZSDELAY(); - - /* This funny hack depends upon BRK_ABRT not interfering - * with the other bits we care about in R1. - */ - if (ch & BRK_ABRT) - r1 |= BRK_ABRT; - - if (!(ch & Rx_CH_AV)) - break; - - ch = readb(&channel->data); - ZSDELAY(); - - ch &= up->parity_mask; - - if (unlikely(ZS_IS_KEYB(up)) || unlikely(ZS_IS_MOUSE(up))) { - sunzilog_kbdms_receive_chars(up, ch, 0); - continue; - } - - if (tty == NULL) { - uart_handle_sysrq_char(&up->port, ch); - continue; - } - - /* A real serial line, record the character and status. */ - flag = TTY_NORMAL; - up->port.icount.rx++; - if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) { - if (r1 & BRK_ABRT) { - r1 &= ~(PAR_ERR | CRC_ERR); - up->port.icount.brk++; - if (uart_handle_break(&up->port)) - continue; - } - else if (r1 & PAR_ERR) - up->port.icount.parity++; - else if (r1 & CRC_ERR) - up->port.icount.frame++; - if (r1 & Rx_OVR) - up->port.icount.overrun++; - r1 &= up->port.read_status_mask; - if (r1 & BRK_ABRT) - flag = TTY_BREAK; - else if (r1 & PAR_ERR) - flag = TTY_PARITY; - else if (r1 & CRC_ERR) - flag = TTY_FRAME; - } - if (uart_handle_sysrq_char(&up->port, ch)) - continue; - - if (up->port.ignore_status_mask == 0xff || - (r1 & up->port.ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); - } - if (r1 & Rx_OVR) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - - return tty; -} - -static void sunzilog_status_handle(struct uart_sunzilog_port *up, - struct zilog_channel __iomem *channel) -{ - unsigned char status; - - status = readb(&channel->control); - ZSDELAY(); - - writeb(RES_EXT_INT, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - - if (status & BRK_ABRT) { - if (ZS_IS_MOUSE(up)) - sunzilog_kbdms_receive_chars(up, 0, 1); - if (ZS_IS_CONS(up)) { - /* Wait for BREAK to deassert to avoid potentially - * confusing the PROM. - */ - while (1) { - status = readb(&channel->control); - ZSDELAY(); - if (!(status & BRK_ABRT)) - break; - } - sun_do_break(); - return; - } - } - - if (ZS_WANTS_MODEM_STATUS(up)) { - if (status & SYNC) - up->port.icount.dsr++; - - /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. - * But it does not tell us which bit has changed, we have to keep - * track of this ourselves. - */ - if ((status ^ up->prev_status) ^ DCD) - uart_handle_dcd_change(&up->port, - (status & DCD)); - if ((status ^ up->prev_status) ^ CTS) - uart_handle_cts_change(&up->port, - (status & CTS)); - - wake_up_interruptible(&up->port.state->port.delta_msr_wait); - } - - up->prev_status = status; -} - -static void sunzilog_transmit_chars(struct uart_sunzilog_port *up, - struct zilog_channel __iomem *channel) -{ - struct circ_buf *xmit; - - if (ZS_IS_CONS(up)) { - unsigned char status = readb(&channel->control); - ZSDELAY(); - - /* TX still busy? Just wait for the next TX done interrupt. - * - * It can occur because of how we do serial console writes. It would - * be nice to transmit console writes just like we normally would for - * a TTY line. (ie. buffered and TX interrupt driven). That is not - * easy because console writes cannot sleep. One solution might be - * to poll on enough port->xmit space becomming free. -DaveM - */ - if (!(status & Tx_BUF_EMP)) - return; - } - - up->flags &= ~SUNZILOG_FLAG_TX_ACTIVE; - - if (ZS_REGS_HELD(up)) { - __load_zsregs(channel, up->curregs); - up->flags &= ~SUNZILOG_FLAG_REGS_HELD; - } - - if (ZS_TX_STOPPED(up)) { - up->flags &= ~SUNZILOG_FLAG_TX_STOPPED; - goto ack_tx_int; - } - - if (up->port.x_char) { - up->flags |= SUNZILOG_FLAG_TX_ACTIVE; - writeb(up->port.x_char, &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); - - up->port.icount.tx++; - up->port.x_char = 0; - return; - } - - if (up->port.state == NULL) - goto ack_tx_int; - xmit = &up->port.state->xmit; - if (uart_circ_empty(xmit)) - goto ack_tx_int; - - if (uart_tx_stopped(&up->port)) - goto ack_tx_int; - - up->flags |= SUNZILOG_FLAG_TX_ACTIVE; - writeb(xmit->buf[xmit->tail], &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - up->port.icount.tx++; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - - return; - -ack_tx_int: - writeb(RES_Tx_P, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); -} - -static irqreturn_t sunzilog_interrupt(int irq, void *dev_id) -{ - struct uart_sunzilog_port *up = dev_id; - - while (up) { - struct zilog_channel __iomem *channel - = ZILOG_CHANNEL_FROM_PORT(&up->port); - struct tty_struct *tty; - unsigned char r3; - - spin_lock(&up->port.lock); - r3 = read_zsreg(channel, R3); - - /* Channel A */ - tty = NULL; - if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { - writeb(RES_H_IUS, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - - if (r3 & CHARxIP) - tty = sunzilog_receive_chars(up, channel); - if (r3 & CHAEXT) - sunzilog_status_handle(up, channel); - if (r3 & CHATxIP) - sunzilog_transmit_chars(up, channel); - } - spin_unlock(&up->port.lock); - - if (tty) - tty_flip_buffer_push(tty); - - /* Channel B */ - up = up->next; - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - - spin_lock(&up->port.lock); - tty = NULL; - if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { - writeb(RES_H_IUS, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - - if (r3 & CHBRxIP) - tty = sunzilog_receive_chars(up, channel); - if (r3 & CHBEXT) - sunzilog_status_handle(up, channel); - if (r3 & CHBTxIP) - sunzilog_transmit_chars(up, channel); - } - spin_unlock(&up->port.lock); - - if (tty) - tty_flip_buffer_push(tty); - - up = up->next; - } - - return IRQ_HANDLED; -} - -/* A convenient way to quickly get R0 status. The caller must _not_ hold the - * port lock, it is acquired here. - */ -static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port) -{ - struct zilog_channel __iomem *channel; - unsigned char status; - - channel = ZILOG_CHANNEL_FROM_PORT(port); - status = readb(&channel->control); - ZSDELAY(); - - return status; -} - -/* The port lock is not held. */ -static unsigned int sunzilog_tx_empty(struct uart_port *port) -{ - unsigned long flags; - unsigned char status; - unsigned int ret; - - spin_lock_irqsave(&port->lock, flags); - - status = sunzilog_read_channel_status(port); - - spin_unlock_irqrestore(&port->lock, flags); - - if (status & Tx_BUF_EMP) - ret = TIOCSER_TEMT; - else - ret = 0; - - return ret; -} - -/* The port lock is held and interrupts are disabled. */ -static unsigned int sunzilog_get_mctrl(struct uart_port *port) -{ - unsigned char status; - unsigned int ret; - - status = sunzilog_read_channel_status(port); - - ret = 0; - if (status & DCD) - ret |= TIOCM_CAR; - if (status & SYNC) - ret |= TIOCM_DSR; - if (status & CTS) - ret |= TIOCM_CTS; - - return ret; -} - -/* The port lock is held and interrupts are disabled. */ -static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; - struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); - unsigned char set_bits, clear_bits; - - set_bits = clear_bits = 0; - - if (mctrl & TIOCM_RTS) - set_bits |= RTS; - else - clear_bits |= RTS; - if (mctrl & TIOCM_DTR) - set_bits |= DTR; - else - clear_bits |= DTR; - - /* NOTE: Not subject to 'transmitter active' rule. */ - up->curregs[R5] |= set_bits; - up->curregs[R5] &= ~clear_bits; - write_zsreg(channel, R5, up->curregs[R5]); -} - -/* The port lock is held and interrupts are disabled. */ -static void sunzilog_stop_tx(struct uart_port *port) -{ - struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; - - up->flags |= SUNZILOG_FLAG_TX_STOPPED; -} - -/* The port lock is held and interrupts are disabled. */ -static void sunzilog_start_tx(struct uart_port *port) -{ - struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; - struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); - unsigned char status; - - up->flags |= SUNZILOG_FLAG_TX_ACTIVE; - up->flags &= ~SUNZILOG_FLAG_TX_STOPPED; - - status = readb(&channel->control); - ZSDELAY(); - - /* TX busy? Just wait for the TX done interrupt. */ - if (!(status & Tx_BUF_EMP)) - return; - - /* Send the first character to jump-start the TX done - * IRQ sending engine. - */ - if (port->x_char) { - writeb(port->x_char, &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); - - port->icount.tx++; - port->x_char = 0; - } else { - struct circ_buf *xmit = &port->state->xmit; - - writeb(xmit->buf[xmit->tail], &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&up->port); - } -} - -/* The port lock is held. */ -static void sunzilog_stop_rx(struct uart_port *port) -{ - struct uart_sunzilog_port *up = UART_ZILOG(port); - struct zilog_channel __iomem *channel; - - if (ZS_IS_CONS(up)) - return; - - channel = ZILOG_CHANNEL_FROM_PORT(port); - - /* Disable all RX interrupts. */ - up->curregs[R1] &= ~RxINT_MASK; - sunzilog_maybe_update_regs(up, channel); -} - -/* The port lock is held. */ -static void sunzilog_enable_ms(struct uart_port *port) -{ - struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; - struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); - unsigned char new_reg; - - new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE); - if (new_reg != up->curregs[R15]) { - up->curregs[R15] = new_reg; - - /* NOTE: Not subject to 'transmitter active' rule. */ - write_zsreg(channel, R15, up->curregs[R15] & ~WR7pEN); - } -} - -/* The port lock is not held. */ -static void sunzilog_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; - struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); - unsigned char set_bits, clear_bits, new_reg; - unsigned long flags; - - set_bits = clear_bits = 0; - - if (break_state) - set_bits |= SND_BRK; - else - clear_bits |= SND_BRK; - - spin_lock_irqsave(&port->lock, flags); - - new_reg = (up->curregs[R5] | set_bits) & ~clear_bits; - if (new_reg != up->curregs[R5]) { - up->curregs[R5] = new_reg; - - /* NOTE: Not subject to 'transmitter active' rule. */ - write_zsreg(channel, R5, up->curregs[R5]); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void __sunzilog_startup(struct uart_sunzilog_port *up) -{ - struct zilog_channel __iomem *channel; - - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - up->prev_status = readb(&channel->control); - - /* Enable receiver and transmitter. */ - up->curregs[R3] |= RxENAB; - up->curregs[R5] |= TxENAB; - - up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; - sunzilog_maybe_update_regs(up, channel); -} - -static int sunzilog_startup(struct uart_port *port) -{ - struct uart_sunzilog_port *up = UART_ZILOG(port); - unsigned long flags; - - if (ZS_IS_CONS(up)) - return 0; - - spin_lock_irqsave(&port->lock, flags); - __sunzilog_startup(up); - spin_unlock_irqrestore(&port->lock, flags); - return 0; -} - -/* - * The test for ZS_IS_CONS is explained by the following e-mail: - ***** - * From: Russell King - * Date: Sun, 8 Dec 2002 10:18:38 +0000 - * - * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote: - * > I boot my 2.5 boxes using "console=ttyS0,9600" argument, - * > and I noticed that something is not right with reference - * > counting in this case. It seems that when the console - * > is open by kernel initially, this is not accounted - * > as an open, and uart_startup is not called. - * - * That is correct. We are unable to call uart_startup when the serial - * console is initialised because it may need to allocate memory (as - * request_irq does) and the memory allocators may not have been - * initialised. - * - * 1. initialise the port into a state where it can send characters in the - * console write method. - * - * 2. don't do the actual hardware shutdown in your shutdown() method (but - * do the normal software shutdown - ie, free irqs etc) - ***** - */ -static void sunzilog_shutdown(struct uart_port *port) -{ - struct uart_sunzilog_port *up = UART_ZILOG(port); - struct zilog_channel __iomem *channel; - unsigned long flags; - - if (ZS_IS_CONS(up)) - return; - - spin_lock_irqsave(&port->lock, flags); - - channel = ZILOG_CHANNEL_FROM_PORT(port); - - /* Disable receiver and transmitter. */ - up->curregs[R3] &= ~RxENAB; - up->curregs[R5] &= ~TxENAB; - - /* Disable all interrupts and BRK assertion. */ - up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); - up->curregs[R5] &= ~SND_BRK; - sunzilog_maybe_update_regs(up, channel); - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* Shared by TTY driver and serial console setup. The port lock is held - * and local interrupts are disabled. - */ -static void -sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag, - unsigned int iflag, int brg) -{ - - up->curregs[R10] = NRZ; - up->curregs[R11] = TCBR | RCBR; - - /* Program BAUD and clock source. */ - up->curregs[R4] &= ~XCLK_MASK; - up->curregs[R4] |= X16CLK; - up->curregs[R12] = brg & 0xff; - up->curregs[R13] = (brg >> 8) & 0xff; - up->curregs[R14] = BRSRC | BRENAB; - - /* Character size, stop bits, and parity. */ - up->curregs[R3] &= ~RxN_MASK; - up->curregs[R5] &= ~TxN_MASK; - switch (cflag & CSIZE) { - case CS5: - up->curregs[R3] |= Rx5; - up->curregs[R5] |= Tx5; - up->parity_mask = 0x1f; - break; - case CS6: - up->curregs[R3] |= Rx6; - up->curregs[R5] |= Tx6; - up->parity_mask = 0x3f; - break; - case CS7: - up->curregs[R3] |= Rx7; - up->curregs[R5] |= Tx7; - up->parity_mask = 0x7f; - break; - case CS8: - default: - up->curregs[R3] |= Rx8; - up->curregs[R5] |= Tx8; - up->parity_mask = 0xff; - break; - }; - up->curregs[R4] &= ~0x0c; - if (cflag & CSTOPB) - up->curregs[R4] |= SB2; - else - up->curregs[R4] |= SB1; - if (cflag & PARENB) - up->curregs[R4] |= PAR_ENAB; - else - up->curregs[R4] &= ~PAR_ENAB; - if (!(cflag & PARODD)) - up->curregs[R4] |= PAR_EVEN; - else - up->curregs[R4] &= ~PAR_EVEN; - - up->port.read_status_mask = Rx_OVR; - if (iflag & INPCK) - up->port.read_status_mask |= CRC_ERR | PAR_ERR; - if (iflag & (BRKINT | PARMRK)) - up->port.read_status_mask |= BRK_ABRT; - - up->port.ignore_status_mask = 0; - if (iflag & IGNPAR) - up->port.ignore_status_mask |= CRC_ERR | PAR_ERR; - if (iflag & IGNBRK) { - up->port.ignore_status_mask |= BRK_ABRT; - if (iflag & IGNPAR) - up->port.ignore_status_mask |= Rx_OVR; - } - - if ((cflag & CREAD) == 0) - up->port.ignore_status_mask = 0xff; -} - -/* The port lock is not held. */ -static void -sunzilog_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; - unsigned long flags; - int baud, brg; - - baud = uart_get_baud_rate(port, termios, old, 1200, 76800); - - spin_lock_irqsave(&up->port.lock, flags); - - brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); - - sunzilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg); - - if (UART_ENABLE_MS(&up->port, termios->c_cflag)) - up->flags |= SUNZILOG_FLAG_MODEM_STATUS; - else - up->flags &= ~SUNZILOG_FLAG_MODEM_STATUS; - - up->cflag = termios->c_cflag; - - sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port)); - - uart_update_timeout(port, termios->c_cflag, baud); - - spin_unlock_irqrestore(&up->port.lock, flags); -} - -static const char *sunzilog_type(struct uart_port *port) -{ - struct uart_sunzilog_port *up = UART_ZILOG(port); - - return (up->flags & SUNZILOG_FLAG_ESCC) ? "zs (ESCC)" : "zs"; -} - -/* We do not request/release mappings of the registers here, this - * happens at early serial probe time. - */ -static void sunzilog_release_port(struct uart_port *port) -{ -} - -static int sunzilog_request_port(struct uart_port *port) -{ - return 0; -} - -/* These do not need to do anything interesting either. */ -static void sunzilog_config_port(struct uart_port *port, int flags) -{ -} - -/* We do not support letting the user mess with the divisor, IRQ, etc. */ -static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return -EINVAL; -} - -#ifdef CONFIG_CONSOLE_POLL -static int sunzilog_get_poll_char(struct uart_port *port) -{ - unsigned char ch, r1; - struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; - struct zilog_channel __iomem *channel - = ZILOG_CHANNEL_FROM_PORT(&up->port); - - - r1 = read_zsreg(channel, R1); - if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { - writeb(ERR_RES, &channel->control); - ZSDELAY(); - ZS_WSYNC(channel); - } - - ch = readb(&channel->control); - ZSDELAY(); - - /* This funny hack depends upon BRK_ABRT not interfering - * with the other bits we care about in R1. - */ - if (ch & BRK_ABRT) - r1 |= BRK_ABRT; - - if (!(ch & Rx_CH_AV)) - return NO_POLL_CHAR; - - ch = readb(&channel->data); - ZSDELAY(); - - ch &= up->parity_mask; - return ch; -} - -static void sunzilog_put_poll_char(struct uart_port *port, - unsigned char ch) -{ - struct uart_sunzilog_port *up = (struct uart_sunzilog_port *)port; - - sunzilog_putchar(&up->port, ch); -} -#endif /* CONFIG_CONSOLE_POLL */ - -static struct uart_ops sunzilog_pops = { - .tx_empty = sunzilog_tx_empty, - .set_mctrl = sunzilog_set_mctrl, - .get_mctrl = sunzilog_get_mctrl, - .stop_tx = sunzilog_stop_tx, - .start_tx = sunzilog_start_tx, - .stop_rx = sunzilog_stop_rx, - .enable_ms = sunzilog_enable_ms, - .break_ctl = sunzilog_break_ctl, - .startup = sunzilog_startup, - .shutdown = sunzilog_shutdown, - .set_termios = sunzilog_set_termios, - .type = sunzilog_type, - .release_port = sunzilog_release_port, - .request_port = sunzilog_request_port, - .config_port = sunzilog_config_port, - .verify_port = sunzilog_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = sunzilog_get_poll_char, - .poll_put_char = sunzilog_put_poll_char, -#endif -}; - -static int uart_chip_count; -static struct uart_sunzilog_port *sunzilog_port_table; -static struct zilog_layout __iomem **sunzilog_chip_regs; - -static struct uart_sunzilog_port *sunzilog_irq_chain; - -static struct uart_driver sunzilog_reg = { - .owner = THIS_MODULE, - .driver_name = "sunzilog", - .dev_name = "ttyS", - .major = TTY_MAJOR, -}; - -static int __init sunzilog_alloc_tables(int num_sunzilog) -{ - struct uart_sunzilog_port *up; - unsigned long size; - int num_channels = num_sunzilog * 2; - int i; - - size = num_channels * sizeof(struct uart_sunzilog_port); - sunzilog_port_table = kzalloc(size, GFP_KERNEL); - if (!sunzilog_port_table) - return -ENOMEM; - - for (i = 0; i < num_channels; i++) { - up = &sunzilog_port_table[i]; - - spin_lock_init(&up->port.lock); - - if (i == 0) - sunzilog_irq_chain = up; - - if (i < num_channels - 1) - up->next = up + 1; - else - up->next = NULL; - } - - size = num_sunzilog * sizeof(struct zilog_layout __iomem *); - sunzilog_chip_regs = kzalloc(size, GFP_KERNEL); - if (!sunzilog_chip_regs) { - kfree(sunzilog_port_table); - sunzilog_irq_chain = NULL; - return -ENOMEM; - } - - return 0; -} - -static void sunzilog_free_tables(void) -{ - kfree(sunzilog_port_table); - sunzilog_irq_chain = NULL; - kfree(sunzilog_chip_regs); -} - -#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ - -static void sunzilog_putchar(struct uart_port *port, int ch) -{ - struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); - int loops = ZS_PUT_CHAR_MAX_DELAY; - - /* This is a timed polling loop so do not switch the explicit - * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM - */ - do { - unsigned char val = readb(&channel->control); - if (val & Tx_BUF_EMP) { - ZSDELAY(); - break; - } - udelay(5); - } while (--loops); - - writeb(ch, &channel->data); - ZSDELAY(); - ZS_WSYNC(channel); -} - -#ifdef CONFIG_SERIO - -static DEFINE_SPINLOCK(sunzilog_serio_lock); - -static int sunzilog_serio_write(struct serio *serio, unsigned char ch) -{ - struct uart_sunzilog_port *up = serio->port_data; - unsigned long flags; - - spin_lock_irqsave(&sunzilog_serio_lock, flags); - - sunzilog_putchar(&up->port, ch); - - spin_unlock_irqrestore(&sunzilog_serio_lock, flags); - - return 0; -} - -static int sunzilog_serio_open(struct serio *serio) -{ - struct uart_sunzilog_port *up = serio->port_data; - unsigned long flags; - int ret; - - spin_lock_irqsave(&sunzilog_serio_lock, flags); - if (!up->serio_open) { - up->serio_open = 1; - ret = 0; - } else - ret = -EBUSY; - spin_unlock_irqrestore(&sunzilog_serio_lock, flags); - - return ret; -} - -static void sunzilog_serio_close(struct serio *serio) -{ - struct uart_sunzilog_port *up = serio->port_data; - unsigned long flags; - - spin_lock_irqsave(&sunzilog_serio_lock, flags); - up->serio_open = 0; - spin_unlock_irqrestore(&sunzilog_serio_lock, flags); -} - -#endif /* CONFIG_SERIO */ - -#ifdef CONFIG_SERIAL_SUNZILOG_CONSOLE -static void -sunzilog_console_write(struct console *con, const char *s, unsigned int count) -{ - struct uart_sunzilog_port *up = &sunzilog_port_table[con->index]; - unsigned long flags; - int locked = 1; - - local_irq_save(flags); - if (up->port.sysrq) { - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&up->port.lock); - } else - spin_lock(&up->port.lock); - - uart_console_write(&up->port, s, count, sunzilog_putchar); - udelay(2); - - if (locked) - spin_unlock(&up->port.lock); - local_irq_restore(flags); -} - -static int __init sunzilog_console_setup(struct console *con, char *options) -{ - struct uart_sunzilog_port *up = &sunzilog_port_table[con->index]; - unsigned long flags; - int baud, brg; - - if (up->port.type != PORT_SUNZILOG) - return -1; - - printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n", - (sunzilog_reg.minor - 64) + con->index, con->index); - - /* Get firmware console settings. */ - sunserial_console_termios(con, up->port.dev->of_node); - - /* Firmware console speed is limited to 150-->38400 baud so - * this hackish cflag thing is OK. - */ - switch (con->cflag & CBAUD) { - case B150: baud = 150; break; - case B300: baud = 300; break; - case B600: baud = 600; break; - case B1200: baud = 1200; break; - case B2400: baud = 2400; break; - case B4800: baud = 4800; break; - default: case B9600: baud = 9600; break; - case B19200: baud = 19200; break; - case B38400: baud = 38400; break; - }; - - brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); - - spin_lock_irqsave(&up->port.lock, flags); - - up->curregs[R15] |= BRKIE; - sunzilog_convert_to_zs(up, con->cflag, 0, brg); - - sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); - __sunzilog_startup(up); - - spin_unlock_irqrestore(&up->port.lock, flags); - - return 0; -} - -static struct console sunzilog_console_ops = { - .name = "ttyS", - .write = sunzilog_console_write, - .device = uart_console_device, - .setup = sunzilog_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &sunzilog_reg, -}; - -static inline struct console *SUNZILOG_CONSOLE(void) -{ - return &sunzilog_console_ops; -} - -#else -#define SUNZILOG_CONSOLE() (NULL) -#endif - -static void __devinit sunzilog_init_kbdms(struct uart_sunzilog_port *up) -{ - int baud, brg; - - if (up->flags & SUNZILOG_FLAG_CONS_KEYB) { - up->cflag = B1200 | CS8 | CLOCAL | CREAD; - baud = 1200; - } else { - up->cflag = B4800 | CS8 | CLOCAL | CREAD; - baud = 4800; - } - - up->curregs[R15] |= BRKIE; - brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); - sunzilog_convert_to_zs(up, up->cflag, 0, brg); - sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); - __sunzilog_startup(up); -} - -#ifdef CONFIG_SERIO -static void __devinit sunzilog_register_serio(struct uart_sunzilog_port *up) -{ - struct serio *serio = &up->serio; - - serio->port_data = up; - - serio->id.type = SERIO_RS232; - if (up->flags & SUNZILOG_FLAG_CONS_KEYB) { - serio->id.proto = SERIO_SUNKBD; - strlcpy(serio->name, "zskbd", sizeof(serio->name)); - } else { - serio->id.proto = SERIO_SUN; - serio->id.extra = 1; - strlcpy(serio->name, "zsms", sizeof(serio->name)); - } - strlcpy(serio->phys, - ((up->flags & SUNZILOG_FLAG_CONS_KEYB) ? - "zs/serio0" : "zs/serio1"), - sizeof(serio->phys)); - - serio->write = sunzilog_serio_write; - serio->open = sunzilog_serio_open; - serio->close = sunzilog_serio_close; - serio->dev.parent = up->port.dev; - - serio_register_port(serio); -} -#endif - -static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up) -{ - struct zilog_channel __iomem *channel; - unsigned long flags; - int baud, brg; - - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - - spin_lock_irqsave(&up->port.lock, flags); - if (ZS_IS_CHANNEL_A(up)) { - write_zsreg(channel, R9, FHWRES); - ZSDELAY_LONG(); - (void) read_zsreg(channel, R0); - } - - if (up->flags & (SUNZILOG_FLAG_CONS_KEYB | - SUNZILOG_FLAG_CONS_MOUSE)) { - up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; - up->curregs[R4] = PAR_EVEN | X16CLK | SB1; - up->curregs[R3] = RxENAB | Rx8; - up->curregs[R5] = TxENAB | Tx8; - up->curregs[R6] = 0x00; /* SDLC Address */ - up->curregs[R7] = 0x7E; /* SDLC Flag */ - up->curregs[R9] = NV; - up->curregs[R7p] = 0x00; - sunzilog_init_kbdms(up); - /* Only enable interrupts if an ISR handler available */ - if (up->flags & SUNZILOG_FLAG_ISR_HANDLER) - up->curregs[R9] |= MIE; - write_zsreg(channel, R9, up->curregs[R9]); - } else { - /* Normal serial TTY. */ - up->parity_mask = 0xff; - up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; - up->curregs[R4] = PAR_EVEN | X16CLK | SB1; - up->curregs[R3] = RxENAB | Rx8; - up->curregs[R5] = TxENAB | Tx8; - up->curregs[R6] = 0x00; /* SDLC Address */ - up->curregs[R7] = 0x7E; /* SDLC Flag */ - up->curregs[R9] = NV; - up->curregs[R10] = NRZ; - up->curregs[R11] = TCBR | RCBR; - baud = 9600; - brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); - up->curregs[R12] = (brg & 0xff); - up->curregs[R13] = (brg >> 8) & 0xff; - up->curregs[R14] = BRSRC | BRENAB; - up->curregs[R15] = FIFOEN; /* Use FIFO if on ESCC */ - up->curregs[R7p] = TxFIFO_LVL | RxFIFO_LVL; - if (__load_zsregs(channel, up->curregs)) { - up->flags |= SUNZILOG_FLAG_ESCC; - } - /* Only enable interrupts if an ISR handler available */ - if (up->flags & SUNZILOG_FLAG_ISR_HANDLER) - up->curregs[R9] |= MIE; - write_zsreg(channel, R9, up->curregs[R9]); - } - - spin_unlock_irqrestore(&up->port.lock, flags); - -#ifdef CONFIG_SERIO - if (up->flags & (SUNZILOG_FLAG_CONS_KEYB | - SUNZILOG_FLAG_CONS_MOUSE)) - sunzilog_register_serio(up); -#endif -} - -static int zilog_irq = -1; - -static int __devinit zs_probe(struct platform_device *op, const struct of_device_id *match) -{ - static int kbm_inst, uart_inst; - int inst; - struct uart_sunzilog_port *up; - struct zilog_layout __iomem *rp; - int keyboard_mouse = 0; - int err; - - if (of_find_property(op->dev.of_node, "keyboard", NULL)) - keyboard_mouse = 1; - - /* uarts must come before keyboards/mice */ - if (keyboard_mouse) - inst = uart_chip_count + kbm_inst; - else - inst = uart_inst; - - sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0, - sizeof(struct zilog_layout), - "zs"); - if (!sunzilog_chip_regs[inst]) - return -ENOMEM; - - rp = sunzilog_chip_regs[inst]; - - if (zilog_irq == -1) - zilog_irq = op->archdata.irqs[0]; - - up = &sunzilog_port_table[inst * 2]; - - /* Channel A */ - up[0].port.mapbase = op->resource[0].start + 0x00; - up[0].port.membase = (void __iomem *) &rp->channelA; - up[0].port.iotype = UPIO_MEM; - up[0].port.irq = op->archdata.irqs[0]; - up[0].port.uartclk = ZS_CLOCK; - up[0].port.fifosize = 1; - up[0].port.ops = &sunzilog_pops; - up[0].port.type = PORT_SUNZILOG; - up[0].port.flags = 0; - up[0].port.line = (inst * 2) + 0; - up[0].port.dev = &op->dev; - up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A; - if (keyboard_mouse) - up[0].flags |= SUNZILOG_FLAG_CONS_KEYB; - sunzilog_init_hw(&up[0]); - - /* Channel B */ - up[1].port.mapbase = op->resource[0].start + 0x04; - up[1].port.membase = (void __iomem *) &rp->channelB; - up[1].port.iotype = UPIO_MEM; - up[1].port.irq = op->archdata.irqs[0]; - up[1].port.uartclk = ZS_CLOCK; - up[1].port.fifosize = 1; - up[1].port.ops = &sunzilog_pops; - up[1].port.type = PORT_SUNZILOG; - up[1].port.flags = 0; - up[1].port.line = (inst * 2) + 1; - up[1].port.dev = &op->dev; - up[1].flags |= 0; - if (keyboard_mouse) - up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE; - sunzilog_init_hw(&up[1]); - - if (!keyboard_mouse) { - if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node, - &sunzilog_reg, up[0].port.line, - false)) - up->flags |= SUNZILOG_FLAG_IS_CONS; - err = uart_add_one_port(&sunzilog_reg, &up[0].port); - if (err) { - of_iounmap(&op->resource[0], - rp, sizeof(struct zilog_layout)); - return err; - } - if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node, - &sunzilog_reg, up[1].port.line, - false)) - up->flags |= SUNZILOG_FLAG_IS_CONS; - err = uart_add_one_port(&sunzilog_reg, &up[1].port); - if (err) { - uart_remove_one_port(&sunzilog_reg, &up[0].port); - of_iounmap(&op->resource[0], - rp, sizeof(struct zilog_layout)); - return err; - } - uart_inst++; - } else { - printk(KERN_INFO "%s: Keyboard at MMIO 0x%llx (irq = %d) " - "is a %s\n", - dev_name(&op->dev), - (unsigned long long) up[0].port.mapbase, - op->archdata.irqs[0], sunzilog_type(&up[0].port)); - printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) " - "is a %s\n", - dev_name(&op->dev), - (unsigned long long) up[1].port.mapbase, - op->archdata.irqs[0], sunzilog_type(&up[1].port)); - kbm_inst++; - } - - dev_set_drvdata(&op->dev, &up[0]); - - return 0; -} - -static void __devexit zs_remove_one(struct uart_sunzilog_port *up) -{ - if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) { -#ifdef CONFIG_SERIO - serio_unregister_port(&up->serio); -#endif - } else - uart_remove_one_port(&sunzilog_reg, &up->port); -} - -static int __devexit zs_remove(struct platform_device *op) -{ - struct uart_sunzilog_port *up = dev_get_drvdata(&op->dev); - struct zilog_layout __iomem *regs; - - zs_remove_one(&up[0]); - zs_remove_one(&up[1]); - - regs = sunzilog_chip_regs[up[0].port.line / 2]; - of_iounmap(&op->resource[0], regs, sizeof(struct zilog_layout)); - - dev_set_drvdata(&op->dev, NULL); - - return 0; -} - -static const struct of_device_id zs_match[] = { - { - .name = "zs", - }, - {}, -}; -MODULE_DEVICE_TABLE(of, zs_match); - -static struct of_platform_driver zs_driver = { - .driver = { - .name = "zs", - .owner = THIS_MODULE, - .of_match_table = zs_match, - }, - .probe = zs_probe, - .remove = __devexit_p(zs_remove), -}; - -static int __init sunzilog_init(void) -{ - struct device_node *dp; - int err; - int num_keybms = 0; - int num_sunzilog = 0; - - for_each_node_by_name(dp, "zs") { - num_sunzilog++; - if (of_find_property(dp, "keyboard", NULL)) - num_keybms++; - } - - if (num_sunzilog) { - err = sunzilog_alloc_tables(num_sunzilog); - if (err) - goto out; - - uart_chip_count = num_sunzilog - num_keybms; - - err = sunserial_register_minors(&sunzilog_reg, - uart_chip_count * 2); - if (err) - goto out_free_tables; - } - - err = of_register_platform_driver(&zs_driver); - if (err) - goto out_unregister_uart; - - if (zilog_irq != -1) { - struct uart_sunzilog_port *up = sunzilog_irq_chain; - err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED, - "zs", sunzilog_irq_chain); - if (err) - goto out_unregister_driver; - - /* Enable Interrupts */ - while (up) { - struct zilog_channel __iomem *channel; - - /* printk (KERN_INFO "Enable IRQ for ZILOG Hardware %p\n", up); */ - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - up->flags |= SUNZILOG_FLAG_ISR_HANDLER; - up->curregs[R9] |= MIE; - write_zsreg(channel, R9, up->curregs[R9]); - up = up->next; - } - } - -out: - return err; - -out_unregister_driver: - of_unregister_platform_driver(&zs_driver); - -out_unregister_uart: - if (num_sunzilog) { - sunserial_unregister_minors(&sunzilog_reg, num_sunzilog); - sunzilog_reg.cons = NULL; - } - -out_free_tables: - sunzilog_free_tables(); - goto out; -} - -static void __exit sunzilog_exit(void) -{ - of_unregister_platform_driver(&zs_driver); - - if (zilog_irq != -1) { - struct uart_sunzilog_port *up = sunzilog_irq_chain; - - /* Disable Interrupts */ - while (up) { - struct zilog_channel __iomem *channel; - - /* printk (KERN_INFO "Disable IRQ for ZILOG Hardware %p\n", up); */ - channel = ZILOG_CHANNEL_FROM_PORT(&up->port); - up->flags &= ~SUNZILOG_FLAG_ISR_HANDLER; - up->curregs[R9] &= ~MIE; - write_zsreg(channel, R9, up->curregs[R9]); - up = up->next; - } - - free_irq(zilog_irq, sunzilog_irq_chain); - zilog_irq = -1; - } - - if (sunzilog_reg.nr) { - sunserial_unregister_minors(&sunzilog_reg, sunzilog_reg.nr); - sunzilog_free_tables(); - } -} - -module_init(sunzilog_init); -module_exit(sunzilog_exit); - -MODULE_AUTHOR("David S. Miller"); -MODULE_DESCRIPTION("Sun Zilog serial port driver"); -MODULE_VERSION("2.0"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/sunzilog.h b/drivers/serial/sunzilog.h deleted file mode 100644 index 5dec7b47cc38..000000000000 --- a/drivers/serial/sunzilog.h +++ /dev/null @@ -1,289 +0,0 @@ -#ifndef _SUNZILOG_H -#define _SUNZILOG_H - -struct zilog_channel { - volatile unsigned char control; - volatile unsigned char __pad1; - volatile unsigned char data; - volatile unsigned char __pad2; -}; - -struct zilog_layout { - struct zilog_channel channelB; - struct zilog_channel channelA; -}; - -#define NUM_ZSREGS 17 -#define R7p 16 /* Written as R7 with P15 bit 0 set */ - -/* Conversion routines to/from brg time constants from/to bits - * per second. - */ -#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) -#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) - -/* The Zilog register set */ - -#define FLAG 0x7e - -/* Write Register 0 */ -#define R0 0 /* Register selects */ -#define R1 1 -#define R2 2 -#define R3 3 -#define R4 4 -#define R5 5 -#define R6 6 -#define R7 7 -#define R8 8 -#define R9 9 -#define R10 10 -#define R11 11 -#define R12 12 -#define R13 13 -#define R14 14 -#define R15 15 - -#define NULLCODE 0 /* Null Code */ -#define POINT_HIGH 0x8 /* Select upper half of registers */ -#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ -#define SEND_ABORT 0x18 /* HDLC Abort */ -#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ -#define RES_Tx_P 0x28 /* Reset TxINT Pending */ -#define ERR_RES 0x30 /* Error Reset */ -#define RES_H_IUS 0x38 /* Reset highest IUS */ - -#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ -#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ -#define RES_EOM_L 0xC0 /* Reset EOM latch */ - -/* Write Register 1 */ - -#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ -#define TxINT_ENAB 0x2 /* Tx Int Enable */ -#define PAR_SPEC 0x4 /* Parity is special condition */ - -#define RxINT_DISAB 0 /* Rx Int Disable */ -#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ -#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ -#define INT_ERR_Rx 0x18 /* Int on error only */ -#define RxINT_MASK 0x18 - -#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ -#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ -#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ - -/* Write Register #2 (Interrupt Vector) */ - -/* Write Register 3 */ - -#define RxENAB 0x1 /* Rx Enable */ -#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ -#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ -#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ -#define ENT_HM 0x10 /* Enter Hunt Mode */ -#define AUTO_ENAB 0x20 /* Auto Enables */ -#define Rx5 0x0 /* Rx 5 Bits/Character */ -#define Rx7 0x40 /* Rx 7 Bits/Character */ -#define Rx6 0x80 /* Rx 6 Bits/Character */ -#define Rx8 0xc0 /* Rx 8 Bits/Character */ -#define RxN_MASK 0xc0 - -/* Write Register 4 */ - -#define PAR_ENAB 0x1 /* Parity Enable */ -#define PAR_EVEN 0x2 /* Parity Even/Odd* */ - -#define SYNC_ENAB 0 /* Sync Modes Enable */ -#define SB1 0x4 /* 1 stop bit/char */ -#define SB15 0x8 /* 1.5 stop bits/char */ -#define SB2 0xc /* 2 stop bits/char */ - -#define MONSYNC 0 /* 8 Bit Sync character */ -#define BISYNC 0x10 /* 16 bit sync character */ -#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ -#define EXTSYNC 0x30 /* External Sync Mode */ - -#define X1CLK 0x0 /* x1 clock mode */ -#define X16CLK 0x40 /* x16 clock mode */ -#define X32CLK 0x80 /* x32 clock mode */ -#define X64CLK 0xC0 /* x64 clock mode */ -#define XCLK_MASK 0xC0 - -/* Write Register 5 */ - -#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ -#define RTS 0x2 /* RTS */ -#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ -#define TxENAB 0x8 /* Tx Enable */ -#define SND_BRK 0x10 /* Send Break */ -#define Tx5 0x0 /* Tx 5 bits (or less)/character */ -#define Tx7 0x20 /* Tx 7 bits/character */ -#define Tx6 0x40 /* Tx 6 bits/character */ -#define Tx8 0x60 /* Tx 8 bits/character */ -#define TxN_MASK 0x60 -#define DTR 0x80 /* DTR */ - -/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ - -/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ - -/* Write Register 7' (ESCC Only) */ -#define AUTO_TxFLAG 1 /* Automatic Tx SDLC Flag */ -#define AUTO_EOM_RST 2 /* Automatic EOM Reset */ -#define AUTOnRTS 4 /* Automatic /RTS pin deactivation */ -#define RxFIFO_LVL 8 /* Receive FIFO interrupt level */ -#define nDTRnREQ 0x10 /* /DTR/REQ timing */ -#define TxFIFO_LVL 0x20 /* Transmit FIFO interrupt level */ -#define EXT_RD_EN 0x40 /* Extended read register enable */ - -/* Write Register 8 (transmit buffer) */ - -/* Write Register 9 (Master interrupt control) */ -#define VIS 1 /* Vector Includes Status */ -#define NV 2 /* No Vector */ -#define DLC 4 /* Disable Lower Chain */ -#define MIE 8 /* Master Interrupt Enable */ -#define STATHI 0x10 /* Status high */ -#define SWIACK 0x20 /* Software Interrupt Ack (not on NMOS) */ -#define NORESET 0 /* No reset on write to R9 */ -#define CHRB 0x40 /* Reset channel B */ -#define CHRA 0x80 /* Reset channel A */ -#define FHWRES 0xc0 /* Force hardware reset */ - -/* Write Register 10 (misc control bits) */ -#define BIT6 1 /* 6 bit/8bit sync */ -#define LOOPMODE 2 /* SDLC Loop mode */ -#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ -#define MARKIDLE 8 /* Mark/flag on idle */ -#define GAOP 0x10 /* Go active on poll */ -#define NRZ 0 /* NRZ mode */ -#define NRZI 0x20 /* NRZI mode */ -#define FM1 0x40 /* FM1 (transition = 1) */ -#define FM0 0x60 /* FM0 (transition = 0) */ -#define CRCPS 0x80 /* CRC Preset I/O */ - -/* Write Register 11 (Clock Mode control) */ -#define TRxCXT 0 /* TRxC = Xtal output */ -#define TRxCTC 1 /* TRxC = Transmit clock */ -#define TRxCBR 2 /* TRxC = BR Generator Output */ -#define TRxCDP 3 /* TRxC = DPLL output */ -#define TRxCOI 4 /* TRxC O/I */ -#define TCRTxCP 0 /* Transmit clock = RTxC pin */ -#define TCTRxCP 8 /* Transmit clock = TRxC pin */ -#define TCBR 0x10 /* Transmit clock = BR Generator output */ -#define TCDPLL 0x18 /* Transmit clock = DPLL output */ -#define RCRTxCP 0 /* Receive clock = RTxC pin */ -#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ -#define RCBR 0x40 /* Receive clock = BR Generator output */ -#define RCDPLL 0x60 /* Receive clock = DPLL output */ -#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ - -/* Write Register 12 (lower byte of baud rate generator time constant) */ - -/* Write Register 13 (upper byte of baud rate generator time constant) */ - -/* Write Register 14 (Misc control bits) */ -#define BRENAB 1 /* Baud rate generator enable */ -#define BRSRC 2 /* Baud rate generator source */ -#define DTRREQ 4 /* DTR/Request function */ -#define AUTOECHO 8 /* Auto Echo */ -#define LOOPBAK 0x10 /* Local loopback */ -#define SEARCH 0x20 /* Enter search mode */ -#define RMC 0x40 /* Reset missing clock */ -#define DISDPLL 0x60 /* Disable DPLL */ -#define SSBR 0x80 /* Set DPLL source = BR generator */ -#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ -#define SFMM 0xc0 /* Set FM mode */ -#define SNRZI 0xe0 /* Set NRZI mode */ - -/* Write Register 15 (external/status interrupt control) */ -#define WR7pEN 1 /* WR7' Enable (ESCC only) */ -#define ZCIE 2 /* Zero count IE */ -#define FIFOEN 4 /* FIFO Enable (ESCC only) */ -#define DCDIE 8 /* DCD IE */ -#define SYNCIE 0x10 /* Sync/hunt IE */ -#define CTSIE 0x20 /* CTS IE */ -#define TxUIE 0x40 /* Tx Underrun/EOM IE */ -#define BRKIE 0x80 /* Break/Abort IE */ - - -/* Read Register 0 */ -#define Rx_CH_AV 0x1 /* Rx Character Available */ -#define ZCOUNT 0x2 /* Zero count */ -#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ -#define DCD 0x8 /* DCD */ -#define SYNC 0x10 /* Sync/hunt */ -#define CTS 0x20 /* CTS */ -#define TxEOM 0x40 /* Tx underrun */ -#define BRK_ABRT 0x80 /* Break/Abort */ - -/* Read Register 1 */ -#define ALL_SNT 0x1 /* All sent */ -/* Residue Data for 8 Rx bits/char programmed */ -#define RES3 0x8 /* 0/3 */ -#define RES4 0x4 /* 0/4 */ -#define RES5 0xc /* 0/5 */ -#define RES6 0x2 /* 0/6 */ -#define RES7 0xa /* 0/7 */ -#define RES8 0x6 /* 0/8 */ -#define RES18 0xe /* 1/8 */ -#define RES28 0x0 /* 2/8 */ -/* Special Rx Condition Interrupts */ -#define PAR_ERR 0x10 /* Parity error */ -#define Rx_OVR 0x20 /* Rx Overrun Error */ -#define CRC_ERR 0x40 /* CRC/Framing Error */ -#define END_FR 0x80 /* End of Frame (SDLC) */ - -/* Read Register 2 (channel b only) - Interrupt vector */ -#define CHB_Tx_EMPTY 0x00 -#define CHB_EXT_STAT 0x02 -#define CHB_Rx_AVAIL 0x04 -#define CHB_SPECIAL 0x06 -#define CHA_Tx_EMPTY 0x08 -#define CHA_EXT_STAT 0x0a -#define CHA_Rx_AVAIL 0x0c -#define CHA_SPECIAL 0x0e -#define STATUS_MASK 0x0e - -/* Read Register 3 (interrupt pending register) ch a only */ -#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ -#define CHBTxIP 0x2 /* Channel B Tx IP */ -#define CHBRxIP 0x4 /* Channel B Rx IP */ -#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ -#define CHATxIP 0x10 /* Channel A Tx IP */ -#define CHARxIP 0x20 /* Channel A Rx IP */ - -/* Read Register 6 (LSB frame byte count [Not on NMOS]) */ - -/* Read Register 7 (MSB frame byte count and FIFO status [Not on NMOS]) */ - -/* Read Register 8 (receive data register) */ - -/* Read Register 10 (misc status bits) */ -#define ONLOOP 2 /* On loop */ -#define LOOPSEND 0x10 /* Loop sending */ -#define CLK2MIS 0x40 /* Two clocks missing */ -#define CLK1MIS 0x80 /* One clock missing */ - -/* Read Register 12 (lower byte of baud rate generator constant) */ - -/* Read Register 13 (upper byte of baud rate generator constant) */ - -/* Read Register 15 (value of WR 15) */ - -/* Misc macros */ -#define ZS_CLEARERR(channel) do { sbus_writeb(ERR_RES, &channel->control); \ - udelay(5); } while(0) - -#define ZS_CLEARSTAT(channel) do { sbus_writeb(RES_EXT_INT, &channel->control); \ - udelay(5); } while(0) - -#define ZS_CLEARFIFO(channel) do { sbus_readb(&channel->data); \ - udelay(2); \ - sbus_readb(&channel->data); \ - udelay(2); \ - sbus_readb(&channel->data); \ - udelay(2); } while(0) - -#endif /* _SUNZILOG_H */ diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c deleted file mode 100644 index 1f36b7eb7351..000000000000 --- a/drivers/serial/timbuart.c +++ /dev/null @@ -1,531 +0,0 @@ -/* - * timbuart.c timberdale FPGA UART driver - * Copyright (c) 2009 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* Supports: - * Timberdale FPGA UART - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "timbuart.h" - -struct timbuart_port { - struct uart_port port; - struct tasklet_struct tasklet; - int usedma; - u32 last_ier; - struct platform_device *dev; -}; - -static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800, - 921600, 1843200, 3250000}; - -static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier); - -static irqreturn_t timbuart_handleinterrupt(int irq, void *devid); - -static void timbuart_stop_rx(struct uart_port *port) -{ - /* spin lock held by upper layer, disable all RX interrupts */ - u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS; - iowrite32(ier, port->membase + TIMBUART_IER); -} - -static void timbuart_stop_tx(struct uart_port *port) -{ - /* spinlock held by upper layer, disable TX interrupt */ - u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE; - iowrite32(ier, port->membase + TIMBUART_IER); -} - -static void timbuart_start_tx(struct uart_port *port) -{ - struct timbuart_port *uart = - container_of(port, struct timbuart_port, port); - - /* do not transfer anything here -> fire off the tasklet */ - tasklet_schedule(&uart->tasklet); -} - -static unsigned int timbuart_tx_empty(struct uart_port *port) -{ - u32 isr = ioread32(port->membase + TIMBUART_ISR); - - return (isr & TXBE) ? TIOCSER_TEMT : 0; -} - -static void timbuart_flush_buffer(struct uart_port *port) -{ - if (!timbuart_tx_empty(port)) { - u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | - TIMBUART_CTRL_FLSHTX; - - iowrite8(ctl, port->membase + TIMBUART_CTRL); - iowrite32(TXBF, port->membase + TIMBUART_ISR); - } -} - -static void timbuart_rx_chars(struct uart_port *port) -{ - struct tty_struct *tty = port->state->port.tty; - - while (ioread32(port->membase + TIMBUART_ISR) & RXDP) { - u8 ch = ioread8(port->membase + TIMBUART_RXFIFO); - port->icount.rx++; - tty_insert_flip_char(tty, ch, TTY_NORMAL); - } - - spin_unlock(&port->lock); - tty_flip_buffer_push(port->state->port.tty); - spin_lock(&port->lock); - - dev_dbg(port->dev, "%s - total read %d bytes\n", - __func__, port->icount.rx); -} - -static void timbuart_tx_chars(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - - while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) && - !uart_circ_empty(xmit)) { - iowrite8(xmit->buf[xmit->tail], - port->membase + TIMBUART_TXFIFO); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - dev_dbg(port->dev, - "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n", - __func__, - port->icount.tx, - ioread8(port->membase + TIMBUART_CTRL), - port->mctrl & TIOCM_RTS, - ioread8(port->membase + TIMBUART_BAUDRATE)); -} - -static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier) -{ - struct timbuart_port *uart = - container_of(port, struct timbuart_port, port); - struct circ_buf *xmit = &port->state->xmit; - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) - return; - - if (port->x_char) - return; - - if (isr & TXFLAGS) { - timbuart_tx_chars(port); - /* clear all TX interrupts */ - iowrite32(TXFLAGS, port->membase + TIMBUART_ISR); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - } else - /* Re-enable any tx interrupt */ - *ier |= uart->last_ier & TXFLAGS; - - /* enable interrupts if there are chars in the transmit buffer, - * Or if we delivered some bytes and want the almost empty interrupt - * we wake up the upper layer later when we got the interrupt - * to give it some time to go out... - */ - if (!uart_circ_empty(xmit)) - *ier |= TXBAE; - - dev_dbg(port->dev, "%s - leaving\n", __func__); -} - -void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier) -{ - if (isr & RXFLAGS) { - /* Some RX status is set */ - if (isr & RXBF) { - u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | - TIMBUART_CTRL_FLSHRX; - iowrite8(ctl, port->membase + TIMBUART_CTRL); - port->icount.overrun++; - } else if (isr & (RXDP)) - timbuart_rx_chars(port); - - /* ack all RX interrupts */ - iowrite32(RXFLAGS, port->membase + TIMBUART_ISR); - } - - /* always have the RX interrupts enabled */ - *ier |= RXBAF | RXBF | RXTT; - - dev_dbg(port->dev, "%s - leaving\n", __func__); -} - -void timbuart_tasklet(unsigned long arg) -{ - struct timbuart_port *uart = (struct timbuart_port *)arg; - u32 isr, ier = 0; - - spin_lock(&uart->port.lock); - - isr = ioread32(uart->port.membase + TIMBUART_ISR); - dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr); - - if (!uart->usedma) - timbuart_handle_tx_port(&uart->port, isr, &ier); - - timbuart_mctrl_check(&uart->port, isr, &ier); - - if (!uart->usedma) - timbuart_handle_rx_port(&uart->port, isr, &ier); - - iowrite32(ier, uart->port.membase + TIMBUART_IER); - - spin_unlock(&uart->port.lock); - dev_dbg(uart->port.dev, "%s leaving\n", __func__); -} - -static unsigned int timbuart_get_mctrl(struct uart_port *port) -{ - u8 cts = ioread8(port->membase + TIMBUART_CTRL); - dev_dbg(port->dev, "%s - cts %x\n", __func__, cts); - - if (cts & TIMBUART_CTRL_CTS) - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - else - return TIOCM_DSR | TIOCM_CAR; -} - -static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - dev_dbg(port->dev, "%s - %x\n", __func__, mctrl); - - if (mctrl & TIOCM_RTS) - iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL); - else - iowrite8(0, port->membase + TIMBUART_CTRL); -} - -static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier) -{ - unsigned int cts; - - if (isr & CTS_DELTA) { - /* ack */ - iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR); - cts = timbuart_get_mctrl(port); - uart_handle_cts_change(port, cts & TIOCM_CTS); - wake_up_interruptible(&port->state->port.delta_msr_wait); - } - - *ier |= CTS_DELTA; -} - -static void timbuart_enable_ms(struct uart_port *port) -{ - /* N/A */ -} - -static void timbuart_break_ctl(struct uart_port *port, int ctl) -{ - /* N/A */ -} - -static int timbuart_startup(struct uart_port *port) -{ - struct timbuart_port *uart = - container_of(port, struct timbuart_port, port); - - dev_dbg(port->dev, "%s\n", __func__); - - iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL); - iowrite32(0x1ff, port->membase + TIMBUART_ISR); - /* Enable all but TX interrupts */ - iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA, - port->membase + TIMBUART_IER); - - return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED, - "timb-uart", uart); -} - -static void timbuart_shutdown(struct uart_port *port) -{ - struct timbuart_port *uart = - container_of(port, struct timbuart_port, port); - dev_dbg(port->dev, "%s\n", __func__); - free_irq(port->irq, uart); - iowrite32(0, port->membase + TIMBUART_IER); -} - -static int get_bindex(int baud) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(baudrates); i++) - if (baud <= baudrates[i]) - return i; - - return -1; -} - -static void timbuart_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - unsigned int baud; - short bindex; - unsigned long flags; - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); - bindex = get_bindex(baud); - dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex); - - if (bindex < 0) - bindex = 0; - baud = baudrates[bindex]; - - /* The serial layer calls into this once with old = NULL when setting - up initially */ - if (old) - tty_termios_copy_hw(termios, old); - tty_termios_encode_baud_rate(termios, baud, baud); - - spin_lock_irqsave(&port->lock, flags); - iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE); - uart_update_timeout(port, termios->c_cflag, baud); - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *timbuart_type(struct uart_port *port) -{ - return port->type == PORT_UNKNOWN ? "timbuart" : NULL; -} - -/* We do not request/release mappings of the registers here, - * currently it's done in the proble function. - */ -static void timbuart_release_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - int size = - resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); - - if (port->flags & UPF_IOREMAP) { - iounmap(port->membase); - port->membase = NULL; - } - - release_mem_region(port->mapbase, size); -} - -static int timbuart_request_port(struct uart_port *port) -{ - struct platform_device *pdev = to_platform_device(port->dev); - int size = - resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); - - if (!request_mem_region(port->mapbase, size, "timb-uart")) - return -EBUSY; - - if (port->flags & UPF_IOREMAP) { - port->membase = ioremap(port->mapbase, size); - if (port->membase == NULL) { - release_mem_region(port->mapbase, size); - return -ENOMEM; - } - } - - return 0; -} - -static irqreturn_t timbuart_handleinterrupt(int irq, void *devid) -{ - struct timbuart_port *uart = (struct timbuart_port *)devid; - - if (ioread8(uart->port.membase + TIMBUART_IPR)) { - uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER); - - /* disable interrupts, the tasklet enables them again */ - iowrite32(0, uart->port.membase + TIMBUART_IER); - - /* fire off bottom half */ - tasklet_schedule(&uart->tasklet); - - return IRQ_HANDLED; - } else - return IRQ_NONE; -} - -/* - * Configure/autoconfigure the port. - */ -static void timbuart_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_TIMBUART; - timbuart_request_port(port); - } -} - -static int timbuart_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - /* we don't want the core code to modify any port params */ - return -EINVAL; -} - -static struct uart_ops timbuart_ops = { - .tx_empty = timbuart_tx_empty, - .set_mctrl = timbuart_set_mctrl, - .get_mctrl = timbuart_get_mctrl, - .stop_tx = timbuart_stop_tx, - .start_tx = timbuart_start_tx, - .flush_buffer = timbuart_flush_buffer, - .stop_rx = timbuart_stop_rx, - .enable_ms = timbuart_enable_ms, - .break_ctl = timbuart_break_ctl, - .startup = timbuart_startup, - .shutdown = timbuart_shutdown, - .set_termios = timbuart_set_termios, - .type = timbuart_type, - .release_port = timbuart_release_port, - .request_port = timbuart_request_port, - .config_port = timbuart_config_port, - .verify_port = timbuart_verify_port -}; - -static struct uart_driver timbuart_driver = { - .owner = THIS_MODULE, - .driver_name = "timberdale_uart", - .dev_name = "ttyTU", - .major = TIMBUART_MAJOR, - .minor = TIMBUART_MINOR, - .nr = 1 -}; - -static int __devinit timbuart_probe(struct platform_device *dev) -{ - int err, irq; - struct timbuart_port *uart; - struct resource *iomem; - - dev_dbg(&dev->dev, "%s\n", __func__); - - uart = kzalloc(sizeof(*uart), GFP_KERNEL); - if (!uart) { - err = -EINVAL; - goto err_mem; - } - - uart->usedma = 0; - - uart->port.uartclk = 3250000 * 16; - uart->port.fifosize = TIMBUART_FIFO_SIZE; - uart->port.regshift = 2; - uart->port.iotype = UPIO_MEM; - uart->port.ops = &timbuart_ops; - uart->port.irq = 0; - uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; - uart->port.line = 0; - uart->port.dev = &dev->dev; - - iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!iomem) { - err = -ENOMEM; - goto err_register; - } - uart->port.mapbase = iomem->start; - uart->port.membase = NULL; - - irq = platform_get_irq(dev, 0); - if (irq < 0) { - err = -EINVAL; - goto err_register; - } - uart->port.irq = irq; - - tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart); - - err = uart_register_driver(&timbuart_driver); - if (err) - goto err_register; - - err = uart_add_one_port(&timbuart_driver, &uart->port); - if (err) - goto err_add_port; - - platform_set_drvdata(dev, uart); - - return 0; - -err_add_port: - uart_unregister_driver(&timbuart_driver); -err_register: - kfree(uart); -err_mem: - printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n", - err); - - return err; -} - -static int __devexit timbuart_remove(struct platform_device *dev) -{ - struct timbuart_port *uart = platform_get_drvdata(dev); - - tasklet_kill(&uart->tasklet); - uart_remove_one_port(&timbuart_driver, &uart->port); - uart_unregister_driver(&timbuart_driver); - kfree(uart); - - return 0; -} - -static struct platform_driver timbuart_platform_driver = { - .driver = { - .name = "timb-uart", - .owner = THIS_MODULE, - }, - .probe = timbuart_probe, - .remove = __devexit_p(timbuart_remove), -}; - -/*--------------------------------------------------------------------------*/ - -static int __init timbuart_init(void) -{ - return platform_driver_register(&timbuart_platform_driver); -} - -static void __exit timbuart_exit(void) -{ - platform_driver_unregister(&timbuart_platform_driver); -} - -module_init(timbuart_init); -module_exit(timbuart_exit); - -MODULE_DESCRIPTION("Timberdale UART driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:timb-uart"); - diff --git a/drivers/serial/timbuart.h b/drivers/serial/timbuart.h deleted file mode 100644 index 7e566766bc43..000000000000 --- a/drivers/serial/timbuart.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * timbuart.c timberdale FPGA GPIO driver - * Copyright (c) 2009 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* Supports: - * Timberdale FPGA UART - */ - -#ifndef _TIMBUART_H -#define _TIMBUART_H - -#define TIMBUART_FIFO_SIZE 2048 - -#define TIMBUART_RXFIFO 0x08 -#define TIMBUART_TXFIFO 0x0c -#define TIMBUART_IER 0x10 -#define TIMBUART_IPR 0x14 -#define TIMBUART_ISR 0x18 -#define TIMBUART_CTRL 0x1c -#define TIMBUART_BAUDRATE 0x20 - -#define TIMBUART_CTRL_RTS 0x01 -#define TIMBUART_CTRL_CTS 0x02 -#define TIMBUART_CTRL_FLSHTX 0x40 -#define TIMBUART_CTRL_FLSHRX 0x80 - -#define TXBF 0x01 -#define TXBAE 0x02 -#define CTS_DELTA 0x04 -#define RXDP 0x08 -#define RXBAF 0x10 -#define RXBF 0x20 -#define RXTT 0x40 -#define RXBNAE 0x80 -#define TXBE 0x100 - -#define RXFLAGS (RXDP | RXBAF | RXBF | RXTT | RXBNAE) -#define TXFLAGS (TXBF | TXBAE) - -#define TIMBUART_MAJOR 204 -#define TIMBUART_MINOR 192 - -#endif /* _TIMBUART_H */ - diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c deleted file mode 100644 index d2fce865b731..000000000000 --- a/drivers/serial/uartlite.c +++ /dev/null @@ -1,709 +0,0 @@ -/* - * uartlite.c: Serial driver for Xilinx uartlite serial controller - * - * Copyright (C) 2006 Peter Korsgaard - * Copyright (C) 2007 Secret Lab Technologies Ltd. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)) -#include -#include -#include -#include - -/* Match table for of_platform binding */ -static struct of_device_id ulite_of_match[] __devinitdata = { - { .compatible = "xlnx,opb-uartlite-1.00.b", }, - { .compatible = "xlnx,xps-uartlite-1.00.a", }, - {} -}; -MODULE_DEVICE_TABLE(of, ulite_of_match); - -#endif - -#define ULITE_NAME "ttyUL" -#define ULITE_MAJOR 204 -#define ULITE_MINOR 187 -#define ULITE_NR_UARTS 4 - -/* --------------------------------------------------------------------- - * Register definitions - * - * For register details see datasheet: - * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf - */ - -#define ULITE_RX 0x00 -#define ULITE_TX 0x04 -#define ULITE_STATUS 0x08 -#define ULITE_CONTROL 0x0c - -#define ULITE_REGION 16 - -#define ULITE_STATUS_RXVALID 0x01 -#define ULITE_STATUS_RXFULL 0x02 -#define ULITE_STATUS_TXEMPTY 0x04 -#define ULITE_STATUS_TXFULL 0x08 -#define ULITE_STATUS_IE 0x10 -#define ULITE_STATUS_OVERRUN 0x20 -#define ULITE_STATUS_FRAME 0x40 -#define ULITE_STATUS_PARITY 0x80 - -#define ULITE_CONTROL_RST_TX 0x01 -#define ULITE_CONTROL_RST_RX 0x02 -#define ULITE_CONTROL_IE 0x10 - - -static struct uart_port ulite_ports[ULITE_NR_UARTS]; - -/* --------------------------------------------------------------------- - * Core UART driver operations - */ - -static int ulite_receive(struct uart_port *port, int stat) -{ - struct tty_struct *tty = port->state->port.tty; - unsigned char ch = 0; - char flag = TTY_NORMAL; - - if ((stat & (ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN - | ULITE_STATUS_FRAME)) == 0) - return 0; - - /* stats */ - if (stat & ULITE_STATUS_RXVALID) { - port->icount.rx++; - ch = ioread32be(port->membase + ULITE_RX); - - if (stat & ULITE_STATUS_PARITY) - port->icount.parity++; - } - - if (stat & ULITE_STATUS_OVERRUN) - port->icount.overrun++; - - if (stat & ULITE_STATUS_FRAME) - port->icount.frame++; - - - /* drop byte with parity error if IGNPAR specificed */ - if (stat & port->ignore_status_mask & ULITE_STATUS_PARITY) - stat &= ~ULITE_STATUS_RXVALID; - - stat &= port->read_status_mask; - - if (stat & ULITE_STATUS_PARITY) - flag = TTY_PARITY; - - - stat &= ~port->ignore_status_mask; - - if (stat & ULITE_STATUS_RXVALID) - tty_insert_flip_char(tty, ch, flag); - - if (stat & ULITE_STATUS_FRAME) - tty_insert_flip_char(tty, 0, TTY_FRAME); - - if (stat & ULITE_STATUS_OVERRUN) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - - return 1; -} - -static int ulite_transmit(struct uart_port *port, int stat) -{ - struct circ_buf *xmit = &port->state->xmit; - - if (stat & ULITE_STATUS_TXFULL) - return 0; - - if (port->x_char) { - iowrite32be(port->x_char, port->membase + ULITE_TX); - port->x_char = 0; - port->icount.tx++; - return 1; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) - return 0; - - iowrite32be(xmit->buf[xmit->tail], port->membase + ULITE_TX); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1); - port->icount.tx++; - - /* wake up */ - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - return 1; -} - -static irqreturn_t ulite_isr(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - int busy, n = 0; - - do { - int stat = ioread32be(port->membase + ULITE_STATUS); - busy = ulite_receive(port, stat); - busy |= ulite_transmit(port, stat); - n++; - } while (busy); - - /* work done? */ - if (n > 1) { - tty_flip_buffer_push(port->state->port.tty); - return IRQ_HANDLED; - } else { - return IRQ_NONE; - } -} - -static unsigned int ulite_tx_empty(struct uart_port *port) -{ - unsigned long flags; - unsigned int ret; - - spin_lock_irqsave(&port->lock, flags); - ret = ioread32be(port->membase + ULITE_STATUS); - spin_unlock_irqrestore(&port->lock, flags); - - return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0; -} - -static unsigned int ulite_get_mctrl(struct uart_port *port) -{ - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; -} - -static void ulite_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - /* N/A */ -} - -static void ulite_stop_tx(struct uart_port *port) -{ - /* N/A */ -} - -static void ulite_start_tx(struct uart_port *port) -{ - ulite_transmit(port, ioread32be(port->membase + ULITE_STATUS)); -} - -static void ulite_stop_rx(struct uart_port *port) -{ - /* don't forward any more data (like !CREAD) */ - port->ignore_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY - | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; -} - -static void ulite_enable_ms(struct uart_port *port) -{ - /* N/A */ -} - -static void ulite_break_ctl(struct uart_port *port, int ctl) -{ - /* N/A */ -} - -static int ulite_startup(struct uart_port *port) -{ - int ret; - - ret = request_irq(port->irq, ulite_isr, - IRQF_SHARED | IRQF_SAMPLE_RANDOM, "uartlite", port); - if (ret) - return ret; - - iowrite32be(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX, - port->membase + ULITE_CONTROL); - iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL); - - return 0; -} - -static void ulite_shutdown(struct uart_port *port) -{ - iowrite32be(0, port->membase + ULITE_CONTROL); - ioread32be(port->membase + ULITE_CONTROL); /* dummy */ - free_irq(port->irq, port); -} - -static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned long flags; - unsigned int baud; - - spin_lock_irqsave(&port->lock, flags); - - port->read_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN - | ULITE_STATUS_TXFULL; - - if (termios->c_iflag & INPCK) - port->read_status_mask |= - ULITE_STATUS_PARITY | ULITE_STATUS_FRAME; - - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= ULITE_STATUS_PARITY - | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; - - /* ignore all characters if CREAD is not set */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= - ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY - | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; - - /* update timeout */ - baud = uart_get_baud_rate(port, termios, old, 0, 460800); - uart_update_timeout(port, termios->c_cflag, baud); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *ulite_type(struct uart_port *port) -{ - return port->type == PORT_UARTLITE ? "uartlite" : NULL; -} - -static void ulite_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, ULITE_REGION); - iounmap(port->membase); - port->membase = NULL; -} - -static int ulite_request_port(struct uart_port *port) -{ - pr_debug("ulite console: port=%p; port->mapbase=%llx\n", - port, (unsigned long long) port->mapbase); - - if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) { - dev_err(port->dev, "Memory region busy\n"); - return -EBUSY; - } - - port->membase = ioremap(port->mapbase, ULITE_REGION); - if (!port->membase) { - dev_err(port->dev, "Unable to map registers\n"); - release_mem_region(port->mapbase, ULITE_REGION); - return -EBUSY; - } - - return 0; -} - -static void ulite_config_port(struct uart_port *port, int flags) -{ - if (!ulite_request_port(port)) - port->type = PORT_UARTLITE; -} - -static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - /* we don't want the core code to modify any port params */ - return -EINVAL; -} - -#ifdef CONFIG_CONSOLE_POLL -static int ulite_get_poll_char(struct uart_port *port) -{ - if (!(ioread32be(port->membase + ULITE_STATUS) - & ULITE_STATUS_RXVALID)) - return NO_POLL_CHAR; - - return ioread32be(port->membase + ULITE_RX); -} - -static void ulite_put_poll_char(struct uart_port *port, unsigned char ch) -{ - while (ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_TXFULL) - cpu_relax(); - - /* write char to device */ - iowrite32be(ch, port->membase + ULITE_TX); -} -#endif - -static struct uart_ops ulite_ops = { - .tx_empty = ulite_tx_empty, - .set_mctrl = ulite_set_mctrl, - .get_mctrl = ulite_get_mctrl, - .stop_tx = ulite_stop_tx, - .start_tx = ulite_start_tx, - .stop_rx = ulite_stop_rx, - .enable_ms = ulite_enable_ms, - .break_ctl = ulite_break_ctl, - .startup = ulite_startup, - .shutdown = ulite_shutdown, - .set_termios = ulite_set_termios, - .type = ulite_type, - .release_port = ulite_release_port, - .request_port = ulite_request_port, - .config_port = ulite_config_port, - .verify_port = ulite_verify_port, -#ifdef CONFIG_CONSOLE_POLL - .poll_get_char = ulite_get_poll_char, - .poll_put_char = ulite_put_poll_char, -#endif -}; - -/* --------------------------------------------------------------------- - * Console driver operations - */ - -#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE -static void ulite_console_wait_tx(struct uart_port *port) -{ - int i; - u8 val; - - /* Spin waiting for TX fifo to have space available */ - for (i = 0; i < 100000; i++) { - val = ioread32be(port->membase + ULITE_STATUS); - if ((val & ULITE_STATUS_TXFULL) == 0) - break; - cpu_relax(); - } -} - -static void ulite_console_putchar(struct uart_port *port, int ch) -{ - ulite_console_wait_tx(port); - iowrite32be(ch, port->membase + ULITE_TX); -} - -static void ulite_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_port *port = &ulite_ports[co->index]; - unsigned long flags; - unsigned int ier; - int locked = 1; - - if (oops_in_progress) { - locked = spin_trylock_irqsave(&port->lock, flags); - } else - spin_lock_irqsave(&port->lock, flags); - - /* save and disable interrupt */ - ier = ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_IE; - iowrite32be(0, port->membase + ULITE_CONTROL); - - uart_console_write(port, s, count, ulite_console_putchar); - - ulite_console_wait_tx(port); - - /* restore interrupt state */ - if (ier) - iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL); - - if (locked) - spin_unlock_irqrestore(&port->lock, flags); -} - -static int __devinit ulite_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index < 0 || co->index >= ULITE_NR_UARTS) - return -EINVAL; - - port = &ulite_ports[co->index]; - - /* Has the device been initialized yet? */ - if (!port->mapbase) { - pr_debug("console on ttyUL%i not present\n", co->index); - return -ENODEV; - } - - /* not initialized yet? */ - if (!port->membase) { - if (ulite_request_port(port)) - return -ENODEV; - } - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver ulite_uart_driver; - -static struct console ulite_console = { - .name = ULITE_NAME, - .write = ulite_console_write, - .device = uart_console_device, - .setup = ulite_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, /* Specified on the cmdline (e.g. console=ttyUL0 ) */ - .data = &ulite_uart_driver, -}; - -static int __init ulite_console_init(void) -{ - register_console(&ulite_console); - return 0; -} - -console_initcall(ulite_console_init); - -#endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */ - -static struct uart_driver ulite_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "uartlite", - .dev_name = ULITE_NAME, - .major = ULITE_MAJOR, - .minor = ULITE_MINOR, - .nr = ULITE_NR_UARTS, -#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE - .cons = &ulite_console, -#endif -}; - -/* --------------------------------------------------------------------- - * Port assignment functions (mapping devices to uart_port structures) - */ - -/** ulite_assign: register a uartlite device with the driver - * - * @dev: pointer to device structure - * @id: requested id number. Pass -1 for automatic port assignment - * @base: base address of uartlite registers - * @irq: irq number for uartlite - * - * Returns: 0 on success, <0 otherwise - */ -static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq) -{ - struct uart_port *port; - int rc; - - /* if id = -1; then scan for a free id and use that */ - if (id < 0) { - for (id = 0; id < ULITE_NR_UARTS; id++) - if (ulite_ports[id].mapbase == 0) - break; - } - if (id < 0 || id >= ULITE_NR_UARTS) { - dev_err(dev, "%s%i too large\n", ULITE_NAME, id); - return -EINVAL; - } - - if ((ulite_ports[id].mapbase) && (ulite_ports[id].mapbase != base)) { - dev_err(dev, "cannot assign to %s%i; it is already in use\n", - ULITE_NAME, id); - return -EBUSY; - } - - port = &ulite_ports[id]; - - spin_lock_init(&port->lock); - port->fifosize = 16; - port->regshift = 2; - port->iotype = UPIO_MEM; - port->iobase = 1; /* mark port in use */ - port->mapbase = base; - port->membase = NULL; - port->ops = &ulite_ops; - port->irq = irq; - port->flags = UPF_BOOT_AUTOCONF; - port->dev = dev; - port->type = PORT_UNKNOWN; - port->line = id; - - dev_set_drvdata(dev, port); - - /* Register the port */ - rc = uart_add_one_port(&ulite_uart_driver, port); - if (rc) { - dev_err(dev, "uart_add_one_port() failed; err=%i\n", rc); - port->mapbase = 0; - dev_set_drvdata(dev, NULL); - return rc; - } - - return 0; -} - -/** ulite_release: register a uartlite device with the driver - * - * @dev: pointer to device structure - */ -static int __devexit ulite_release(struct device *dev) -{ - struct uart_port *port = dev_get_drvdata(dev); - int rc = 0; - - if (port) { - rc = uart_remove_one_port(&ulite_uart_driver, port); - dev_set_drvdata(dev, NULL); - port->mapbase = 0; - } - - return rc; -} - -/* --------------------------------------------------------------------- - * Platform bus binding - */ - -static int __devinit ulite_probe(struct platform_device *pdev) -{ - struct resource *res, *res2; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; - - res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res2) - return -ENODEV; - - return ulite_assign(&pdev->dev, pdev->id, res->start, res2->start); -} - -static int __devexit ulite_remove(struct platform_device *pdev) -{ - return ulite_release(&pdev->dev); -} - -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:uartlite"); - -static struct platform_driver ulite_platform_driver = { - .probe = ulite_probe, - .remove = __devexit_p(ulite_remove), - .driver = { - .owner = THIS_MODULE, - .name = "uartlite", - }, -}; - -/* --------------------------------------------------------------------- - * OF bus bindings - */ -#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)) -static int __devinit -ulite_of_probe(struct platform_device *op, const struct of_device_id *match) -{ - struct resource res; - const unsigned int *id; - int irq, rc; - - dev_dbg(&op->dev, "%s(%p, %p)\n", __func__, op, match); - - rc = of_address_to_resource(op->dev.of_node, 0, &res); - if (rc) { - dev_err(&op->dev, "invalid address\n"); - return rc; - } - - irq = irq_of_parse_and_map(op->dev.of_node, 0); - - id = of_get_property(op->dev.of_node, "port-number", NULL); - - return ulite_assign(&op->dev, id ? *id : -1, res.start, irq); -} - -static int __devexit ulite_of_remove(struct platform_device *op) -{ - return ulite_release(&op->dev); -} - -static struct of_platform_driver ulite_of_driver = { - .probe = ulite_of_probe, - .remove = __devexit_p(ulite_of_remove), - .driver = { - .name = "uartlite", - .owner = THIS_MODULE, - .of_match_table = ulite_of_match, - }, -}; - -/* Registration helpers to keep the number of #ifdefs to a minimum */ -static inline int __init ulite_of_register(void) -{ - pr_debug("uartlite: calling of_register_platform_driver()\n"); - return of_register_platform_driver(&ulite_of_driver); -} - -static inline void __exit ulite_of_unregister(void) -{ - of_unregister_platform_driver(&ulite_of_driver); -} -#else /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */ -/* Appropriate config not enabled; do nothing helpers */ -static inline int __init ulite_of_register(void) { return 0; } -static inline void __exit ulite_of_unregister(void) { } -#endif /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */ - -/* --------------------------------------------------------------------- - * Module setup/teardown - */ - -int __init ulite_init(void) -{ - int ret; - - pr_debug("uartlite: calling uart_register_driver()\n"); - ret = uart_register_driver(&ulite_uart_driver); - if (ret) - goto err_uart; - - ret = ulite_of_register(); - if (ret) - goto err_of; - - pr_debug("uartlite: calling platform_driver_register()\n"); - ret = platform_driver_register(&ulite_platform_driver); - if (ret) - goto err_plat; - - return 0; - -err_plat: - ulite_of_unregister(); -err_of: - uart_unregister_driver(&ulite_uart_driver); -err_uart: - printk(KERN_ERR "registering uartlite driver failed: err=%i", ret); - return ret; -} - -void __exit ulite_exit(void) -{ - platform_driver_unregister(&ulite_platform_driver); - ulite_of_unregister(); - uart_unregister_driver(&ulite_uart_driver); -} - -module_init(ulite_init); -module_exit(ulite_exit); - -MODULE_AUTHOR("Peter Korsgaard "); -MODULE_DESCRIPTION("Xilinx uartlite serial driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c deleted file mode 100644 index 3f4848e2174a..000000000000 --- a/drivers/serial/ucc_uart.c +++ /dev/null @@ -1,1537 +0,0 @@ -/* - * Freescale QUICC Engine UART device driver - * - * Author: Timur Tabi - * - * Copyright 2007 Freescale Semiconductor, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * This driver adds support for UART devices via Freescale's QUICC Engine - * found on some Freescale SOCs. - * - * If Soft-UART support is needed but not already present, then this driver - * will request and upload the "Soft-UART" microcode upon probe. The - * filename of the microcode should be fsl_qe_ucode_uart_X_YZ.bin, where "X" - * is the name of the SOC (e.g. 8323), and YZ is the revision of the SOC, - * (e.g. "11" for 1.1). - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -/* - * The GUMR flag for Soft UART. This would normally be defined in qe.h, - * but Soft-UART is a hack and we want to keep everything related to it in - * this file. - */ -#define UCC_SLOW_GUMR_H_SUART 0x00004000 /* Soft-UART */ - -/* - * soft_uart is 1 if we need to use Soft-UART mode - */ -static int soft_uart; -/* - * firmware_loaded is 1 if the firmware has been loaded, 0 otherwise. - */ -static int firmware_loaded; - -/* Enable this macro to configure all serial ports in internal loopback - mode */ -/* #define LOOPBACK */ - -/* The major and minor device numbers are defined in - * http://www.lanana.org/docs/device-list/devices-2.6+.txt. For the QE - * UART, we have major number 204 and minor numbers 46 - 49, which are the - * same as for the CPM2. This decision was made because no Freescale part - * has both a CPM and a QE. - */ -#define SERIAL_QE_MAJOR 204 -#define SERIAL_QE_MINOR 46 - -/* Since we only have minor numbers 46 - 49, there is a hard limit of 4 ports */ -#define UCC_MAX_UART 4 - -/* The number of buffer descriptors for receiving characters. */ -#define RX_NUM_FIFO 4 - -/* The number of buffer descriptors for transmitting characters. */ -#define TX_NUM_FIFO 4 - -/* The maximum size of the character buffer for a single RX BD. */ -#define RX_BUF_SIZE 32 - -/* The maximum size of the character buffer for a single TX BD. */ -#define TX_BUF_SIZE 32 - -/* - * The number of jiffies to wait after receiving a close command before the - * device is actually closed. This allows the last few characters to be - * sent over the wire. - */ -#define UCC_WAIT_CLOSING 100 - -struct ucc_uart_pram { - struct ucc_slow_pram common; - u8 res1[8]; /* reserved */ - __be16 maxidl; /* Maximum idle chars */ - __be16 idlc; /* temp idle counter */ - __be16 brkcr; /* Break count register */ - __be16 parec; /* receive parity error counter */ - __be16 frmec; /* receive framing error counter */ - __be16 nosec; /* receive noise counter */ - __be16 brkec; /* receive break condition counter */ - __be16 brkln; /* last received break length */ - __be16 uaddr[2]; /* UART address character 1 & 2 */ - __be16 rtemp; /* Temp storage */ - __be16 toseq; /* Transmit out of sequence char */ - __be16 cchars[8]; /* control characters 1-8 */ - __be16 rccm; /* receive control character mask */ - __be16 rccr; /* receive control character register */ - __be16 rlbc; /* receive last break character */ - __be16 res2; /* reserved */ - __be32 res3; /* reserved, should be cleared */ - u8 res4; /* reserved, should be cleared */ - u8 res5[3]; /* reserved, should be cleared */ - __be32 res6; /* reserved, should be cleared */ - __be32 res7; /* reserved, should be cleared */ - __be32 res8; /* reserved, should be cleared */ - __be32 res9; /* reserved, should be cleared */ - __be32 res10; /* reserved, should be cleared */ - __be32 res11; /* reserved, should be cleared */ - __be32 res12; /* reserved, should be cleared */ - __be32 res13; /* reserved, should be cleared */ -/* The rest is for Soft-UART only */ - __be16 supsmr; /* 0x90, Shadow UPSMR */ - __be16 res92; /* 0x92, reserved, initialize to 0 */ - __be32 rx_state; /* 0x94, RX state, initialize to 0 */ - __be32 rx_cnt; /* 0x98, RX count, initialize to 0 */ - u8 rx_length; /* 0x9C, Char length, set to 1+CL+PEN+1+SL */ - u8 rx_bitmark; /* 0x9D, reserved, initialize to 0 */ - u8 rx_temp_dlst_qe; /* 0x9E, reserved, initialize to 0 */ - u8 res14[0xBC - 0x9F]; /* reserved */ - __be32 dump_ptr; /* 0xBC, Dump pointer */ - __be32 rx_frame_rem; /* 0xC0, reserved, initialize to 0 */ - u8 rx_frame_rem_size; /* 0xC4, reserved, initialize to 0 */ - u8 tx_mode; /* 0xC5, mode, 0=AHDLC, 1=UART */ - __be16 tx_state; /* 0xC6, TX state */ - u8 res15[0xD0 - 0xC8]; /* reserved */ - __be32 resD0; /* 0xD0, reserved, initialize to 0 */ - u8 resD4; /* 0xD4, reserved, initialize to 0 */ - __be16 resD5; /* 0xD5, reserved, initialize to 0 */ -} __attribute__ ((packed)); - -/* SUPSMR definitions, for Soft-UART only */ -#define UCC_UART_SUPSMR_SL 0x8000 -#define UCC_UART_SUPSMR_RPM_MASK 0x6000 -#define UCC_UART_SUPSMR_RPM_ODD 0x0000 -#define UCC_UART_SUPSMR_RPM_LOW 0x2000 -#define UCC_UART_SUPSMR_RPM_EVEN 0x4000 -#define UCC_UART_SUPSMR_RPM_HIGH 0x6000 -#define UCC_UART_SUPSMR_PEN 0x1000 -#define UCC_UART_SUPSMR_TPM_MASK 0x0C00 -#define UCC_UART_SUPSMR_TPM_ODD 0x0000 -#define UCC_UART_SUPSMR_TPM_LOW 0x0400 -#define UCC_UART_SUPSMR_TPM_EVEN 0x0800 -#define UCC_UART_SUPSMR_TPM_HIGH 0x0C00 -#define UCC_UART_SUPSMR_FRZ 0x0100 -#define UCC_UART_SUPSMR_UM_MASK 0x00c0 -#define UCC_UART_SUPSMR_UM_NORMAL 0x0000 -#define UCC_UART_SUPSMR_UM_MAN_MULTI 0x0040 -#define UCC_UART_SUPSMR_UM_AUTO_MULTI 0x00c0 -#define UCC_UART_SUPSMR_CL_MASK 0x0030 -#define UCC_UART_SUPSMR_CL_8 0x0030 -#define UCC_UART_SUPSMR_CL_7 0x0020 -#define UCC_UART_SUPSMR_CL_6 0x0010 -#define UCC_UART_SUPSMR_CL_5 0x0000 - -#define UCC_UART_TX_STATE_AHDLC 0x00 -#define UCC_UART_TX_STATE_UART 0x01 -#define UCC_UART_TX_STATE_X1 0x00 -#define UCC_UART_TX_STATE_X16 0x80 - -#define UCC_UART_PRAM_ALIGNMENT 0x100 - -#define UCC_UART_SIZE_OF_BD UCC_SLOW_SIZE_OF_BD -#define NUM_CONTROL_CHARS 8 - -/* Private per-port data structure */ -struct uart_qe_port { - struct uart_port port; - struct ucc_slow __iomem *uccp; - struct ucc_uart_pram __iomem *uccup; - struct ucc_slow_info us_info; - struct ucc_slow_private *us_private; - struct device_node *np; - unsigned int ucc_num; /* First ucc is 0, not 1 */ - - u16 rx_nrfifos; - u16 rx_fifosize; - u16 tx_nrfifos; - u16 tx_fifosize; - int wait_closing; - u32 flags; - struct qe_bd *rx_bd_base; - struct qe_bd *rx_cur; - struct qe_bd *tx_bd_base; - struct qe_bd *tx_cur; - unsigned char *tx_buf; - unsigned char *rx_buf; - void *bd_virt; /* virtual address of the BD buffers */ - dma_addr_t bd_dma_addr; /* bus address of the BD buffers */ - unsigned int bd_size; /* size of BD buffer space */ -}; - -static struct uart_driver ucc_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "ucc_uart", - .dev_name = "ttyQE", - .major = SERIAL_QE_MAJOR, - .minor = SERIAL_QE_MINOR, - .nr = UCC_MAX_UART, -}; - -/* - * Virtual to physical address translation. - * - * Given the virtual address for a character buffer, this function returns - * the physical (DMA) equivalent. - */ -static inline dma_addr_t cpu2qe_addr(void *addr, struct uart_qe_port *qe_port) -{ - if (likely((addr >= qe_port->bd_virt)) && - (addr < (qe_port->bd_virt + qe_port->bd_size))) - return qe_port->bd_dma_addr + (addr - qe_port->bd_virt); - - /* something nasty happened */ - printk(KERN_ERR "%s: addr=%p\n", __func__, addr); - BUG(); - return 0; -} - -/* - * Physical to virtual address translation. - * - * Given the physical (DMA) address for a character buffer, this function - * returns the virtual equivalent. - */ -static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port) -{ - /* sanity check */ - if (likely((addr >= qe_port->bd_dma_addr) && - (addr < (qe_port->bd_dma_addr + qe_port->bd_size)))) - return qe_port->bd_virt + (addr - qe_port->bd_dma_addr); - - /* something nasty happened */ - printk(KERN_ERR "%s: addr=%x\n", __func__, addr); - BUG(); - return NULL; -} - -/* - * Return 1 if the QE is done transmitting all buffers for this port - * - * This function scans each BD in sequence. If we find a BD that is not - * ready (READY=1), then we return 0 indicating that the QE is still sending - * data. If we reach the last BD (WRAP=1), then we know we've scanned - * the entire list, and all BDs are done. - */ -static unsigned int qe_uart_tx_empty(struct uart_port *port) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - struct qe_bd *bdp = qe_port->tx_bd_base; - - while (1) { - if (in_be16(&bdp->status) & BD_SC_READY) - /* This BD is not done, so return "not done" */ - return 0; - - if (in_be16(&bdp->status) & BD_SC_WRAP) - /* - * This BD is done and it's the last one, so return - * "done" - */ - return 1; - - bdp++; - }; -} - -/* - * Set the modem control lines - * - * Although the QE can control the modem control lines (e.g. CTS), we - * don't need that support. This function must exist, however, otherwise - * the kernel will panic. - */ -void qe_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -/* - * Get the current modem control line status - * - * Although the QE can control the modem control lines (e.g. CTS), this - * driver currently doesn't support that, so we always return Carrier - * Detect, Data Set Ready, and Clear To Send. - */ -static unsigned int qe_uart_get_mctrl(struct uart_port *port) -{ - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; -} - -/* - * Disable the transmit interrupt. - * - * Although this function is called "stop_tx", it does not actually stop - * transmission of data. Instead, it tells the QE to not generate an - * interrupt when the UCC is finished sending characters. - */ -static void qe_uart_stop_tx(struct uart_port *port) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - - clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX); -} - -/* - * Transmit as many characters to the HW as possible. - * - * This function will attempt to stuff of all the characters from the - * kernel's transmit buffer into TX BDs. - * - * A return value of non-zero indicates that it successfully stuffed all - * characters from the kernel buffer. - * - * A return value of zero indicates that there are still characters in the - * kernel's buffer that have not been transmitted, but there are no more BDs - * available. This function should be called again after a BD has been made - * available. - */ -static int qe_uart_tx_pump(struct uart_qe_port *qe_port) -{ - struct qe_bd *bdp; - unsigned char *p; - unsigned int count; - struct uart_port *port = &qe_port->port; - struct circ_buf *xmit = &port->state->xmit; - - bdp = qe_port->rx_cur; - - /* Handle xon/xoff */ - if (port->x_char) { - /* Pick next descriptor and fill from buffer */ - bdp = qe_port->tx_cur; - - p = qe2cpu_addr(bdp->buf, qe_port); - - *p++ = port->x_char; - out_be16(&bdp->length, 1); - setbits16(&bdp->status, BD_SC_READY); - /* Get next BD. */ - if (in_be16(&bdp->status) & BD_SC_WRAP) - bdp = qe_port->tx_bd_base; - else - bdp++; - qe_port->tx_cur = bdp; - - port->icount.tx++; - port->x_char = 0; - return 1; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - qe_uart_stop_tx(port); - return 0; - } - - /* Pick next descriptor and fill from buffer */ - bdp = qe_port->tx_cur; - - while (!(in_be16(&bdp->status) & BD_SC_READY) && - (xmit->tail != xmit->head)) { - count = 0; - p = qe2cpu_addr(bdp->buf, qe_port); - while (count < qe_port->tx_fifosize) { - *p++ = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - count++; - if (xmit->head == xmit->tail) - break; - } - - out_be16(&bdp->length, count); - setbits16(&bdp->status, BD_SC_READY); - - /* Get next BD. */ - if (in_be16(&bdp->status) & BD_SC_WRAP) - bdp = qe_port->tx_bd_base; - else - bdp++; - } - qe_port->tx_cur = bdp; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) { - /* The kernel buffer is empty, so turn off TX interrupts. We - don't need to be told when the QE is finished transmitting - the data. */ - qe_uart_stop_tx(port); - return 0; - } - - return 1; -} - -/* - * Start transmitting data - * - * This function will start transmitting any available data, if the port - * isn't already transmitting data. - */ -static void qe_uart_start_tx(struct uart_port *port) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - - /* If we currently are transmitting, then just return */ - if (in_be16(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX) - return; - - /* Otherwise, pump the port and start transmission */ - if (qe_uart_tx_pump(qe_port)) - setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX); -} - -/* - * Stop transmitting data - */ -static void qe_uart_stop_rx(struct uart_port *port) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - - clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX); -} - -/* - * Enable status change interrupts - * - * We don't support status change interrupts, but we need to define this - * function otherwise the kernel will panic. - */ -static void qe_uart_enable_ms(struct uart_port *port) -{ -} - -/* Start or stop sending break signal - * - * This function controls the sending of a break signal. If break_state=1, - * then we start sending a break signal. If break_state=0, then we stop - * sending the break signal. - */ -static void qe_uart_break_ctl(struct uart_port *port, int break_state) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - - if (break_state) - ucc_slow_stop_tx(qe_port->us_private); - else - ucc_slow_restart_tx(qe_port->us_private); -} - -/* ISR helper function for receiving character. - * - * This function is called by the ISR to handling receiving characters - */ -static void qe_uart_int_rx(struct uart_qe_port *qe_port) -{ - int i; - unsigned char ch, *cp; - struct uart_port *port = &qe_port->port; - struct tty_struct *tty = port->state->port.tty; - struct qe_bd *bdp; - u16 status; - unsigned int flg; - - /* Just loop through the closed BDs and copy the characters into - * the buffer. - */ - bdp = qe_port->rx_cur; - while (1) { - status = in_be16(&bdp->status); - - /* If this one is empty, then we assume we've read them all */ - if (status & BD_SC_EMPTY) - break; - - /* get number of characters, and check space in RX buffer */ - i = in_be16(&bdp->length); - - /* If we don't have enough room in RX buffer for the entire BD, - * then we try later, which will be the next RX interrupt. - */ - if (tty_buffer_request_room(tty, i) < i) { - dev_dbg(port->dev, "ucc-uart: no room in RX buffer\n"); - return; - } - - /* get pointer */ - cp = qe2cpu_addr(bdp->buf, qe_port); - - /* loop through the buffer */ - while (i-- > 0) { - ch = *cp++; - port->icount.rx++; - flg = TTY_NORMAL; - - if (!i && status & - (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV)) - goto handle_error; - if (uart_handle_sysrq_char(port, ch)) - continue; - -error_return: - tty_insert_flip_char(tty, ch, flg); - - } - - /* This BD is ready to be used again. Clear status. get next */ - clrsetbits_be16(&bdp->status, BD_SC_BR | BD_SC_FR | BD_SC_PR | - BD_SC_OV | BD_SC_ID, BD_SC_EMPTY); - if (in_be16(&bdp->status) & BD_SC_WRAP) - bdp = qe_port->rx_bd_base; - else - bdp++; - - } - - /* Write back buffer pointer */ - qe_port->rx_cur = bdp; - - /* Activate BH processing */ - tty_flip_buffer_push(tty); - - return; - - /* Error processing */ - -handle_error: - /* Statistics */ - if (status & BD_SC_BR) - port->icount.brk++; - if (status & BD_SC_PR) - port->icount.parity++; - if (status & BD_SC_FR) - port->icount.frame++; - if (status & BD_SC_OV) - port->icount.overrun++; - - /* Mask out ignored conditions */ - status &= port->read_status_mask; - - /* Handle the remaining ones */ - if (status & BD_SC_BR) - flg = TTY_BREAK; - else if (status & BD_SC_PR) - flg = TTY_PARITY; - else if (status & BD_SC_FR) - flg = TTY_FRAME; - - /* Overrun does not affect the current character ! */ - if (status & BD_SC_OV) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); -#ifdef SUPPORT_SYSRQ - port->sysrq = 0; -#endif - goto error_return; -} - -/* Interrupt handler - * - * This interrupt handler is called after a BD is processed. - */ -static irqreturn_t qe_uart_int(int irq, void *data) -{ - struct uart_qe_port *qe_port = (struct uart_qe_port *) data; - struct ucc_slow __iomem *uccp = qe_port->uccp; - u16 events; - - /* Clear the interrupts */ - events = in_be16(&uccp->ucce); - out_be16(&uccp->ucce, events); - - if (events & UCC_UART_UCCE_BRKE) - uart_handle_break(&qe_port->port); - - if (events & UCC_UART_UCCE_RX) - qe_uart_int_rx(qe_port); - - if (events & UCC_UART_UCCE_TX) - qe_uart_tx_pump(qe_port); - - return events ? IRQ_HANDLED : IRQ_NONE; -} - -/* Initialize buffer descriptors - * - * This function initializes all of the RX and TX buffer descriptors. - */ -static void qe_uart_initbd(struct uart_qe_port *qe_port) -{ - int i; - void *bd_virt; - struct qe_bd *bdp; - - /* Set the physical address of the host memory buffers in the buffer - * descriptors, and the virtual address for us to work with. - */ - bd_virt = qe_port->bd_virt; - bdp = qe_port->rx_bd_base; - qe_port->rx_cur = qe_port->rx_bd_base; - for (i = 0; i < (qe_port->rx_nrfifos - 1); i++) { - out_be16(&bdp->status, BD_SC_EMPTY | BD_SC_INTRPT); - out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); - out_be16(&bdp->length, 0); - bd_virt += qe_port->rx_fifosize; - bdp++; - } - - /* */ - out_be16(&bdp->status, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT); - out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); - out_be16(&bdp->length, 0); - - /* Set the physical address of the host memory - * buffers in the buffer descriptors, and the - * virtual address for us to work with. - */ - bd_virt = qe_port->bd_virt + - L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize); - qe_port->tx_cur = qe_port->tx_bd_base; - bdp = qe_port->tx_bd_base; - for (i = 0; i < (qe_port->tx_nrfifos - 1); i++) { - out_be16(&bdp->status, BD_SC_INTRPT); - out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); - out_be16(&bdp->length, 0); - bd_virt += qe_port->tx_fifosize; - bdp++; - } - - /* Loopback requires the preamble bit to be set on the first TX BD */ -#ifdef LOOPBACK - setbits16(&qe_port->tx_cur->status, BD_SC_P); -#endif - - out_be16(&bdp->status, BD_SC_WRAP | BD_SC_INTRPT); - out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); - out_be16(&bdp->length, 0); -} - -/* - * Initialize a UCC for UART. - * - * This function configures a given UCC to be used as a UART device. Basic - * UCC initialization is handled in qe_uart_request_port(). This function - * does all the UART-specific stuff. - */ -static void qe_uart_init_ucc(struct uart_qe_port *qe_port) -{ - u32 cecr_subblock; - struct ucc_slow __iomem *uccp = qe_port->uccp; - struct ucc_uart_pram *uccup = qe_port->uccup; - - unsigned int i; - - /* First, disable TX and RX in the UCC */ - ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX); - - /* Program the UCC UART parameter RAM */ - out_8(&uccup->common.rbmr, UCC_BMR_GBL | UCC_BMR_BO_BE); - out_8(&uccup->common.tbmr, UCC_BMR_GBL | UCC_BMR_BO_BE); - out_be16(&uccup->common.mrblr, qe_port->rx_fifosize); - out_be16(&uccup->maxidl, 0x10); - out_be16(&uccup->brkcr, 1); - out_be16(&uccup->parec, 0); - out_be16(&uccup->frmec, 0); - out_be16(&uccup->nosec, 0); - out_be16(&uccup->brkec, 0); - out_be16(&uccup->uaddr[0], 0); - out_be16(&uccup->uaddr[1], 0); - out_be16(&uccup->toseq, 0); - for (i = 0; i < 8; i++) - out_be16(&uccup->cchars[i], 0xC000); - out_be16(&uccup->rccm, 0xc0ff); - - /* Configure the GUMR registers for UART */ - if (soft_uart) { - /* Soft-UART requires a 1X multiplier for TX */ - clrsetbits_be32(&uccp->gumr_l, - UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | - UCC_SLOW_GUMR_L_RDCR_MASK, - UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 | - UCC_SLOW_GUMR_L_RDCR_16); - - clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW, - UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX); - } else { - clrsetbits_be32(&uccp->gumr_l, - UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | - UCC_SLOW_GUMR_L_RDCR_MASK, - UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 | - UCC_SLOW_GUMR_L_RDCR_16); - - clrsetbits_be32(&uccp->gumr_h, - UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX, - UCC_SLOW_GUMR_H_RFW); - } - -#ifdef LOOPBACK - clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK, - UCC_SLOW_GUMR_L_DIAG_LOOP); - clrsetbits_be32(&uccp->gumr_h, - UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_RSYN, - UCC_SLOW_GUMR_H_CDS); -#endif - - /* Disable rx interrupts and clear all pending events. */ - out_be16(&uccp->uccm, 0); - out_be16(&uccp->ucce, 0xffff); - out_be16(&uccp->udsr, 0x7e7e); - - /* Initialize UPSMR */ - out_be16(&uccp->upsmr, 0); - - if (soft_uart) { - out_be16(&uccup->supsmr, 0x30); - out_be16(&uccup->res92, 0); - out_be32(&uccup->rx_state, 0); - out_be32(&uccup->rx_cnt, 0); - out_8(&uccup->rx_bitmark, 0); - out_8(&uccup->rx_length, 10); - out_be32(&uccup->dump_ptr, 0x4000); - out_8(&uccup->rx_temp_dlst_qe, 0); - out_be32(&uccup->rx_frame_rem, 0); - out_8(&uccup->rx_frame_rem_size, 0); - /* Soft-UART requires TX to be 1X */ - out_8(&uccup->tx_mode, - UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1); - out_be16(&uccup->tx_state, 0); - out_8(&uccup->resD4, 0); - out_be16(&uccup->resD5, 0); - - /* Set UART mode. - * Enable receive and transmit. - */ - - /* From the microcode errata: - * 1.GUMR_L register, set mode=0010 (QMC). - * 2.Set GUMR_H[17] bit. (UART/AHDLC mode). - * 3.Set GUMR_H[19:20] (Transparent mode) - * 4.Clear GUMR_H[26] (RFW) - * ... - * 6.Receiver must use 16x over sampling - */ - clrsetbits_be32(&uccp->gumr_l, - UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | - UCC_SLOW_GUMR_L_RDCR_MASK, - UCC_SLOW_GUMR_L_MODE_QMC | UCC_SLOW_GUMR_L_TDCR_16 | - UCC_SLOW_GUMR_L_RDCR_16); - - clrsetbits_be32(&uccp->gumr_h, - UCC_SLOW_GUMR_H_RFW | UCC_SLOW_GUMR_H_RSYN, - UCC_SLOW_GUMR_H_SUART | UCC_SLOW_GUMR_H_TRX | - UCC_SLOW_GUMR_H_TTX | UCC_SLOW_GUMR_H_TFL); - -#ifdef LOOPBACK - clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK, - UCC_SLOW_GUMR_L_DIAG_LOOP); - clrbits32(&uccp->gumr_h, UCC_SLOW_GUMR_H_CTSP | - UCC_SLOW_GUMR_H_CDS); -#endif - - cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num); - qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock, - QE_CR_PROTOCOL_UNSPECIFIED, 0); - } else { - cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num); - qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock, - QE_CR_PROTOCOL_UART, 0); - } -} - -/* - * Initialize the port. - */ -static int qe_uart_startup(struct uart_port *port) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - int ret; - - /* - * If we're using Soft-UART mode, then we need to make sure the - * firmware has been uploaded first. - */ - if (soft_uart && !firmware_loaded) { - dev_err(port->dev, "Soft-UART firmware not uploaded\n"); - return -ENODEV; - } - - qe_uart_initbd(qe_port); - qe_uart_init_ucc(qe_port); - - /* Install interrupt handler. */ - ret = request_irq(port->irq, qe_uart_int, IRQF_SHARED, "ucc-uart", - qe_port); - if (ret) { - dev_err(port->dev, "could not claim IRQ %u\n", port->irq); - return ret; - } - - /* Startup rx-int */ - setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX); - ucc_slow_enable(qe_port->us_private, COMM_DIR_RX_AND_TX); - - return 0; -} - -/* - * Shutdown the port. - */ -static void qe_uart_shutdown(struct uart_port *port) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - struct ucc_slow __iomem *uccp = qe_port->uccp; - unsigned int timeout = 20; - - /* Disable RX and TX */ - - /* Wait for all the BDs marked sent */ - while (!qe_uart_tx_empty(port)) { - if (!--timeout) { - dev_warn(port->dev, "shutdown timeout\n"); - break; - } - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(2); - } - - if (qe_port->wait_closing) { - /* Wait a bit longer */ - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(qe_port->wait_closing); - } - - /* Stop uarts */ - ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX); - clrbits16(&uccp->uccm, UCC_UART_UCCE_TX | UCC_UART_UCCE_RX); - - /* Shut them really down and reinit buffer descriptors */ - ucc_slow_graceful_stop_tx(qe_port->us_private); - qe_uart_initbd(qe_port); - - free_irq(port->irq, qe_port); -} - -/* - * Set the serial port parameters. - */ -static void qe_uart_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - struct ucc_slow __iomem *uccp = qe_port->uccp; - unsigned int baud; - unsigned long flags; - u16 upsmr = in_be16(&uccp->upsmr); - struct ucc_uart_pram __iomem *uccup = qe_port->uccup; - u16 supsmr = in_be16(&uccup->supsmr); - u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */ - - /* Character length programmed into the mode register is the - * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, - * 1 or 2 stop bits, minus 1. - * The value 'bits' counts this for us. - */ - - /* byte size */ - upsmr &= UCC_UART_UPSMR_CL_MASK; - supsmr &= UCC_UART_SUPSMR_CL_MASK; - - switch (termios->c_cflag & CSIZE) { - case CS5: - upsmr |= UCC_UART_UPSMR_CL_5; - supsmr |= UCC_UART_SUPSMR_CL_5; - char_length += 5; - break; - case CS6: - upsmr |= UCC_UART_UPSMR_CL_6; - supsmr |= UCC_UART_SUPSMR_CL_6; - char_length += 6; - break; - case CS7: - upsmr |= UCC_UART_UPSMR_CL_7; - supsmr |= UCC_UART_SUPSMR_CL_7; - char_length += 7; - break; - default: /* case CS8 */ - upsmr |= UCC_UART_UPSMR_CL_8; - supsmr |= UCC_UART_SUPSMR_CL_8; - char_length += 8; - break; - } - - /* If CSTOPB is set, we want two stop bits */ - if (termios->c_cflag & CSTOPB) { - upsmr |= UCC_UART_UPSMR_SL; - supsmr |= UCC_UART_SUPSMR_SL; - char_length++; /* + SL */ - } - - if (termios->c_cflag & PARENB) { - upsmr |= UCC_UART_UPSMR_PEN; - supsmr |= UCC_UART_SUPSMR_PEN; - char_length++; /* + PEN */ - - if (!(termios->c_cflag & PARODD)) { - upsmr &= ~(UCC_UART_UPSMR_RPM_MASK | - UCC_UART_UPSMR_TPM_MASK); - upsmr |= UCC_UART_UPSMR_RPM_EVEN | - UCC_UART_UPSMR_TPM_EVEN; - supsmr &= ~(UCC_UART_SUPSMR_RPM_MASK | - UCC_UART_SUPSMR_TPM_MASK); - supsmr |= UCC_UART_SUPSMR_RPM_EVEN | - UCC_UART_SUPSMR_TPM_EVEN; - } - } - - /* - * Set up parity check flag - */ - port->read_status_mask = BD_SC_EMPTY | BD_SC_OV; - if (termios->c_iflag & INPCK) - port->read_status_mask |= BD_SC_FR | BD_SC_PR; - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= BD_SC_BR; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= BD_SC_PR | BD_SC_FR; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= BD_SC_BR; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= BD_SC_OV; - } - /* - * !!! ignore all characters if CREAD is not set - */ - if ((termios->c_cflag & CREAD) == 0) - port->read_status_mask &= ~BD_SC_EMPTY; - - baud = uart_get_baud_rate(port, termios, old, 0, 115200); - - /* Do we really need a spinlock here? */ - spin_lock_irqsave(&port->lock, flags); - - out_be16(&uccp->upsmr, upsmr); - if (soft_uart) { - out_be16(&uccup->supsmr, supsmr); - out_8(&uccup->rx_length, char_length); - - /* Soft-UART requires a 1X multiplier for TX */ - qe_setbrg(qe_port->us_info.rx_clock, baud, 16); - qe_setbrg(qe_port->us_info.tx_clock, baud, 1); - } else { - qe_setbrg(qe_port->us_info.rx_clock, baud, 16); - qe_setbrg(qe_port->us_info.tx_clock, baud, 16); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* - * Return a pointer to a string that describes what kind of port this is. - */ -static const char *qe_uart_type(struct uart_port *port) -{ - return "QE"; -} - -/* - * Allocate any memory and I/O resources required by the port. - */ -static int qe_uart_request_port(struct uart_port *port) -{ - int ret; - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - struct ucc_slow_info *us_info = &qe_port->us_info; - struct ucc_slow_private *uccs; - unsigned int rx_size, tx_size; - void *bd_virt; - dma_addr_t bd_dma_addr = 0; - - ret = ucc_slow_init(us_info, &uccs); - if (ret) { - dev_err(port->dev, "could not initialize UCC%u\n", - qe_port->ucc_num); - return ret; - } - - qe_port->us_private = uccs; - qe_port->uccp = uccs->us_regs; - qe_port->uccup = (struct ucc_uart_pram *) uccs->us_pram; - qe_port->rx_bd_base = uccs->rx_bd; - qe_port->tx_bd_base = uccs->tx_bd; - - /* - * Allocate the transmit and receive data buffers. - */ - - rx_size = L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize); - tx_size = L1_CACHE_ALIGN(qe_port->tx_nrfifos * qe_port->tx_fifosize); - - bd_virt = dma_alloc_coherent(port->dev, rx_size + tx_size, &bd_dma_addr, - GFP_KERNEL); - if (!bd_virt) { - dev_err(port->dev, "could not allocate buffer descriptors\n"); - return -ENOMEM; - } - - qe_port->bd_virt = bd_virt; - qe_port->bd_dma_addr = bd_dma_addr; - qe_port->bd_size = rx_size + tx_size; - - qe_port->rx_buf = bd_virt; - qe_port->tx_buf = qe_port->rx_buf + rx_size; - - return 0; -} - -/* - * Configure the port. - * - * We say we're a CPM-type port because that's mostly true. Once the device - * is configured, this driver operates almost identically to the CPM serial - * driver. - */ -static void qe_uart_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_CPM; - qe_uart_request_port(port); - } -} - -/* - * Release any memory and I/O resources that were allocated in - * qe_uart_request_port(). - */ -static void qe_uart_release_port(struct uart_port *port) -{ - struct uart_qe_port *qe_port = - container_of(port, struct uart_qe_port, port); - struct ucc_slow_private *uccs = qe_port->us_private; - - dma_free_coherent(port->dev, qe_port->bd_size, qe_port->bd_virt, - qe_port->bd_dma_addr); - - ucc_slow_free(uccs); -} - -/* - * Verify that the data in serial_struct is suitable for this device. - */ -static int qe_uart_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM) - return -EINVAL; - - if (ser->irq < 0 || ser->irq >= nr_irqs) - return -EINVAL; - - if (ser->baud_base < 9600) - return -EINVAL; - - return 0; -} -/* UART operations - * - * Details on these functions can be found in Documentation/serial/driver - */ -static struct uart_ops qe_uart_pops = { - .tx_empty = qe_uart_tx_empty, - .set_mctrl = qe_uart_set_mctrl, - .get_mctrl = qe_uart_get_mctrl, - .stop_tx = qe_uart_stop_tx, - .start_tx = qe_uart_start_tx, - .stop_rx = qe_uart_stop_rx, - .enable_ms = qe_uart_enable_ms, - .break_ctl = qe_uart_break_ctl, - .startup = qe_uart_startup, - .shutdown = qe_uart_shutdown, - .set_termios = qe_uart_set_termios, - .type = qe_uart_type, - .release_port = qe_uart_release_port, - .request_port = qe_uart_request_port, - .config_port = qe_uart_config_port, - .verify_port = qe_uart_verify_port, -}; - -/* - * Obtain the SOC model number and revision level - * - * This function parses the device tree to obtain the SOC model. It then - * reads the SVR register to the revision. - * - * The device tree stores the SOC model two different ways. - * - * The new way is: - * - * cpu@0 { - * compatible = "PowerPC,8323"; - * device_type = "cpu"; - * ... - * - * - * The old way is: - * PowerPC,8323@0 { - * device_type = "cpu"; - * ... - * - * This code first checks the new way, and then the old way. - */ -static unsigned int soc_info(unsigned int *rev_h, unsigned int *rev_l) -{ - struct device_node *np; - const char *soc_string; - unsigned int svr; - unsigned int soc; - - /* Find the CPU node */ - np = of_find_node_by_type(NULL, "cpu"); - if (!np) - return 0; - /* Find the compatible property */ - soc_string = of_get_property(np, "compatible", NULL); - if (!soc_string) - /* No compatible property, so try the name. */ - soc_string = np->name; - - /* Extract the SOC number from the "PowerPC," string */ - if ((sscanf(soc_string, "PowerPC,%u", &soc) != 1) || !soc) - return 0; - - /* Get the revision from the SVR */ - svr = mfspr(SPRN_SVR); - *rev_h = (svr >> 4) & 0xf; - *rev_l = svr & 0xf; - - return soc; -} - -/* - * requst_firmware_nowait() callback function - * - * This function is called by the kernel when a firmware is made available, - * or if it times out waiting for the firmware. - */ -static void uart_firmware_cont(const struct firmware *fw, void *context) -{ - struct qe_firmware *firmware; - struct device *dev = context; - int ret; - - if (!fw) { - dev_err(dev, "firmware not found\n"); - return; - } - - firmware = (struct qe_firmware *) fw->data; - - if (firmware->header.length != fw->size) { - dev_err(dev, "invalid firmware\n"); - goto out; - } - - ret = qe_upload_firmware(firmware); - if (ret) { - dev_err(dev, "could not load firmware\n"); - goto out; - } - - firmware_loaded = 1; - out: - release_firmware(fw); -} - -static int ucc_uart_probe(struct platform_device *ofdev, - const struct of_device_id *match) -{ - struct device_node *np = ofdev->dev.of_node; - const unsigned int *iprop; /* Integer OF properties */ - const char *sprop; /* String OF properties */ - struct uart_qe_port *qe_port = NULL; - struct resource res; - int ret; - - /* - * Determine if we need Soft-UART mode - */ - if (of_find_property(np, "soft-uart", NULL)) { - dev_dbg(&ofdev->dev, "using Soft-UART mode\n"); - soft_uart = 1; - } - - /* - * If we are using Soft-UART, determine if we need to upload the - * firmware, too. - */ - if (soft_uart) { - struct qe_firmware_info *qe_fw_info; - - qe_fw_info = qe_get_firmware_info(); - - /* Check if the firmware has been uploaded. */ - if (qe_fw_info && strstr(qe_fw_info->id, "Soft-UART")) { - firmware_loaded = 1; - } else { - char filename[32]; - unsigned int soc; - unsigned int rev_h; - unsigned int rev_l; - - soc = soc_info(&rev_h, &rev_l); - if (!soc) { - dev_err(&ofdev->dev, "unknown CPU model\n"); - return -ENXIO; - } - sprintf(filename, "fsl_qe_ucode_uart_%u_%u%u.bin", - soc, rev_h, rev_l); - - dev_info(&ofdev->dev, "waiting for firmware %s\n", - filename); - - /* - * We call request_firmware_nowait instead of - * request_firmware so that the driver can load and - * initialize the ports without holding up the rest of - * the kernel. If hotplug support is enabled in the - * kernel, then we use it. - */ - ret = request_firmware_nowait(THIS_MODULE, - FW_ACTION_HOTPLUG, filename, &ofdev->dev, - GFP_KERNEL, &ofdev->dev, uart_firmware_cont); - if (ret) { - dev_err(&ofdev->dev, - "could not load firmware %s\n", - filename); - return ret; - } - } - } - - qe_port = kzalloc(sizeof(struct uart_qe_port), GFP_KERNEL); - if (!qe_port) { - dev_err(&ofdev->dev, "can't allocate QE port structure\n"); - return -ENOMEM; - } - - /* Search for IRQ and mapbase */ - ret = of_address_to_resource(np, 0, &res); - if (ret) { - dev_err(&ofdev->dev, "missing 'reg' property in device tree\n"); - kfree(qe_port); - return ret; - } - if (!res.start) { - dev_err(&ofdev->dev, "invalid 'reg' property in device tree\n"); - kfree(qe_port); - return -EINVAL; - } - qe_port->port.mapbase = res.start; - - /* Get the UCC number (device ID) */ - /* UCCs are numbered 1-7 */ - iprop = of_get_property(np, "cell-index", NULL); - if (!iprop) { - iprop = of_get_property(np, "device-id", NULL); - if (!iprop) { - kfree(qe_port); - dev_err(&ofdev->dev, "UCC is unspecified in " - "device tree\n"); - return -EINVAL; - } - } - - if ((*iprop < 1) || (*iprop > UCC_MAX_NUM)) { - dev_err(&ofdev->dev, "no support for UCC%u\n", *iprop); - kfree(qe_port); - return -ENODEV; - } - qe_port->ucc_num = *iprop - 1; - - /* - * In the future, we should not require the BRG to be specified in the - * device tree. If no clock-source is specified, then just pick a BRG - * to use. This requires a new QE library function that manages BRG - * assignments. - */ - - sprop = of_get_property(np, "rx-clock-name", NULL); - if (!sprop) { - dev_err(&ofdev->dev, "missing rx-clock-name in device tree\n"); - kfree(qe_port); - return -ENODEV; - } - - qe_port->us_info.rx_clock = qe_clock_source(sprop); - if ((qe_port->us_info.rx_clock < QE_BRG1) || - (qe_port->us_info.rx_clock > QE_BRG16)) { - dev_err(&ofdev->dev, "rx-clock-name must be a BRG for UART\n"); - kfree(qe_port); - return -ENODEV; - } - -#ifdef LOOPBACK - /* In internal loopback mode, TX and RX must use the same clock */ - qe_port->us_info.tx_clock = qe_port->us_info.rx_clock; -#else - sprop = of_get_property(np, "tx-clock-name", NULL); - if (!sprop) { - dev_err(&ofdev->dev, "missing tx-clock-name in device tree\n"); - kfree(qe_port); - return -ENODEV; - } - qe_port->us_info.tx_clock = qe_clock_source(sprop); -#endif - if ((qe_port->us_info.tx_clock < QE_BRG1) || - (qe_port->us_info.tx_clock > QE_BRG16)) { - dev_err(&ofdev->dev, "tx-clock-name must be a BRG for UART\n"); - kfree(qe_port); - return -ENODEV; - } - - /* Get the port number, numbered 0-3 */ - iprop = of_get_property(np, "port-number", NULL); - if (!iprop) { - dev_err(&ofdev->dev, "missing port-number in device tree\n"); - kfree(qe_port); - return -EINVAL; - } - qe_port->port.line = *iprop; - if (qe_port->port.line >= UCC_MAX_UART) { - dev_err(&ofdev->dev, "port-number must be 0-%u\n", - UCC_MAX_UART - 1); - kfree(qe_port); - return -EINVAL; - } - - qe_port->port.irq = irq_of_parse_and_map(np, 0); - if (qe_port->port.irq == NO_IRQ) { - dev_err(&ofdev->dev, "could not map IRQ for UCC%u\n", - qe_port->ucc_num + 1); - kfree(qe_port); - return -EINVAL; - } - - /* - * Newer device trees have an "fsl,qe" compatible property for the QE - * node, but we still need to support older device trees. - */ - np = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!np) { - np = of_find_node_by_type(NULL, "qe"); - if (!np) { - dev_err(&ofdev->dev, "could not find 'qe' node\n"); - kfree(qe_port); - return -EINVAL; - } - } - - iprop = of_get_property(np, "brg-frequency", NULL); - if (!iprop) { - dev_err(&ofdev->dev, - "missing brg-frequency in device tree\n"); - kfree(qe_port); - return -EINVAL; - } - - if (*iprop) - qe_port->port.uartclk = *iprop; - else { - /* - * Older versions of U-Boot do not initialize the brg-frequency - * property, so in this case we assume the BRG frequency is - * half the QE bus frequency. - */ - iprop = of_get_property(np, "bus-frequency", NULL); - if (!iprop) { - dev_err(&ofdev->dev, - "missing QE bus-frequency in device tree\n"); - kfree(qe_port); - return -EINVAL; - } - if (*iprop) - qe_port->port.uartclk = *iprop / 2; - else { - dev_err(&ofdev->dev, - "invalid QE bus-frequency in device tree\n"); - kfree(qe_port); - return -EINVAL; - } - } - - spin_lock_init(&qe_port->port.lock); - qe_port->np = np; - qe_port->port.dev = &ofdev->dev; - qe_port->port.ops = &qe_uart_pops; - qe_port->port.iotype = UPIO_MEM; - - qe_port->tx_nrfifos = TX_NUM_FIFO; - qe_port->tx_fifosize = TX_BUF_SIZE; - qe_port->rx_nrfifos = RX_NUM_FIFO; - qe_port->rx_fifosize = RX_BUF_SIZE; - - qe_port->wait_closing = UCC_WAIT_CLOSING; - qe_port->port.fifosize = 512; - qe_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; - - qe_port->us_info.ucc_num = qe_port->ucc_num; - qe_port->us_info.regs = (phys_addr_t) res.start; - qe_port->us_info.irq = qe_port->port.irq; - - qe_port->us_info.rx_bd_ring_len = qe_port->rx_nrfifos; - qe_port->us_info.tx_bd_ring_len = qe_port->tx_nrfifos; - - /* Make sure ucc_slow_init() initializes both TX and RX */ - qe_port->us_info.init_tx = 1; - qe_port->us_info.init_rx = 1; - - /* Add the port to the uart sub-system. This will cause - * qe_uart_config_port() to be called, so the us_info structure must - * be initialized. - */ - ret = uart_add_one_port(&ucc_uart_driver, &qe_port->port); - if (ret) { - dev_err(&ofdev->dev, "could not add /dev/ttyQE%u\n", - qe_port->port.line); - kfree(qe_port); - return ret; - } - - dev_set_drvdata(&ofdev->dev, qe_port); - - dev_info(&ofdev->dev, "UCC%u assigned to /dev/ttyQE%u\n", - qe_port->ucc_num + 1, qe_port->port.line); - - /* Display the mknod command for this device */ - dev_dbg(&ofdev->dev, "mknod command is 'mknod /dev/ttyQE%u c %u %u'\n", - qe_port->port.line, SERIAL_QE_MAJOR, - SERIAL_QE_MINOR + qe_port->port.line); - - return 0; -} - -static int ucc_uart_remove(struct platform_device *ofdev) -{ - struct uart_qe_port *qe_port = dev_get_drvdata(&ofdev->dev); - - dev_info(&ofdev->dev, "removing /dev/ttyQE%u\n", qe_port->port.line); - - uart_remove_one_port(&ucc_uart_driver, &qe_port->port); - - dev_set_drvdata(&ofdev->dev, NULL); - kfree(qe_port); - - return 0; -} - -static struct of_device_id ucc_uart_match[] = { - { - .type = "serial", - .compatible = "ucc_uart", - }, - {}, -}; -MODULE_DEVICE_TABLE(of, ucc_uart_match); - -static struct of_platform_driver ucc_uart_of_driver = { - .driver = { - .name = "ucc_uart", - .owner = THIS_MODULE, - .of_match_table = ucc_uart_match, - }, - .probe = ucc_uart_probe, - .remove = ucc_uart_remove, -}; - -static int __init ucc_uart_init(void) -{ - int ret; - - printk(KERN_INFO "Freescale QUICC Engine UART device driver\n"); -#ifdef LOOPBACK - printk(KERN_INFO "ucc-uart: Using loopback mode\n"); -#endif - - ret = uart_register_driver(&ucc_uart_driver); - if (ret) { - printk(KERN_ERR "ucc-uart: could not register UART driver\n"); - return ret; - } - - ret = of_register_platform_driver(&ucc_uart_of_driver); - if (ret) - printk(KERN_ERR - "ucc-uart: could not register platform driver\n"); - - return ret; -} - -static void __exit ucc_uart_exit(void) -{ - printk(KERN_INFO - "Freescale QUICC Engine UART device driver unloading\n"); - - of_unregister_platform_driver(&ucc_uart_of_driver); - uart_unregister_driver(&ucc_uart_driver); -} - -module_init(ucc_uart_init); -module_exit(ucc_uart_exit); - -MODULE_DESCRIPTION("Freescale QUICC Engine (QE) UART"); -MODULE_AUTHOR("Timur Tabi "); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_QE_MAJOR); - diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c deleted file mode 100644 index 3beb6ab4fa68..000000000000 --- a/drivers/serial/vr41xx_siu.c +++ /dev/null @@ -1,978 +0,0 @@ -/* - * Driver for NEC VR4100 series Serial Interface Unit. - * - * Copyright (C) 2004-2008 Yoichi Yuasa - * - * Based on drivers/serial/8250.c, by Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if defined(CONFIG_SERIAL_VR41XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define SIU_BAUD_BASE 1152000 -#define SIU_MAJOR 204 -#define SIU_MINOR_BASE 82 - -#define RX_MAX_COUNT 256 -#define TX_MAX_COUNT 15 - -#define SIUIRSEL 0x08 - #define TMICMODE 0x20 - #define TMICTX 0x10 - #define IRMSEL 0x0c - #define IRMSEL_HP 0x08 - #define IRMSEL_TEMIC 0x04 - #define IRMSEL_SHARP 0x00 - #define IRUSESEL 0x02 - #define SIRSEL 0x01 - -static struct uart_port siu_uart_ports[SIU_PORTS_MAX] = { - [0 ... SIU_PORTS_MAX-1] = { - .lock = __SPIN_LOCK_UNLOCKED(siu_uart_ports->lock), - .irq = -1, - }, -}; - -#ifdef CONFIG_SERIAL_VR41XX_CONSOLE -static uint8_t lsr_break_flag[SIU_PORTS_MAX]; -#endif - -#define siu_read(port, offset) readb((port)->membase + (offset)) -#define siu_write(port, offset, value) writeb((value), (port)->membase + (offset)) - -void vr41xx_select_siu_interface(siu_interface_t interface) -{ - struct uart_port *port; - unsigned long flags; - uint8_t irsel; - - port = &siu_uart_ports[0]; - - spin_lock_irqsave(&port->lock, flags); - - irsel = siu_read(port, SIUIRSEL); - if (interface == SIU_INTERFACE_IRDA) - irsel |= SIRSEL; - else - irsel &= ~SIRSEL; - siu_write(port, SIUIRSEL, irsel); - - spin_unlock_irqrestore(&port->lock, flags); -} -EXPORT_SYMBOL_GPL(vr41xx_select_siu_interface); - -void vr41xx_use_irda(irda_use_t use) -{ - struct uart_port *port; - unsigned long flags; - uint8_t irsel; - - port = &siu_uart_ports[0]; - - spin_lock_irqsave(&port->lock, flags); - - irsel = siu_read(port, SIUIRSEL); - if (use == FIR_USE_IRDA) - irsel |= IRUSESEL; - else - irsel &= ~IRUSESEL; - siu_write(port, SIUIRSEL, irsel); - - spin_unlock_irqrestore(&port->lock, flags); -} -EXPORT_SYMBOL_GPL(vr41xx_use_irda); - -void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed) -{ - struct uart_port *port; - unsigned long flags; - uint8_t irsel; - - port = &siu_uart_ports[0]; - - spin_lock_irqsave(&port->lock, flags); - - irsel = siu_read(port, SIUIRSEL); - irsel &= ~(IRMSEL | TMICTX | TMICMODE); - switch (module) { - case SHARP_IRDA: - irsel |= IRMSEL_SHARP; - break; - case TEMIC_IRDA: - irsel |= IRMSEL_TEMIC | TMICMODE; - if (speed == IRDA_TX_4MBPS) - irsel |= TMICTX; - break; - case HP_IRDA: - irsel |= IRMSEL_HP; - break; - default: - break; - } - siu_write(port, SIUIRSEL, irsel); - - spin_unlock_irqrestore(&port->lock, flags); -} -EXPORT_SYMBOL_GPL(vr41xx_select_irda_module); - -static inline void siu_clear_fifo(struct uart_port *port) -{ - siu_write(port, UART_FCR, UART_FCR_ENABLE_FIFO); - siu_write(port, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT); - siu_write(port, UART_FCR, 0); -} - -static inline unsigned long siu_port_size(struct uart_port *port) -{ - switch (port->type) { - case PORT_VR41XX_SIU: - return 11UL; - case PORT_VR41XX_DSIU: - return 8UL; - } - - return 0; -} - -static inline unsigned int siu_check_type(struct uart_port *port) -{ - if (port->line == 0) - return PORT_VR41XX_SIU; - if (port->line == 1 && port->irq != -1) - return PORT_VR41XX_DSIU; - - return PORT_UNKNOWN; -} - -static inline const char *siu_type_name(struct uart_port *port) -{ - switch (port->type) { - case PORT_VR41XX_SIU: - return "SIU"; - case PORT_VR41XX_DSIU: - return "DSIU"; - } - - return NULL; -} - -static unsigned int siu_tx_empty(struct uart_port *port) -{ - uint8_t lsr; - - lsr = siu_read(port, UART_LSR); - if (lsr & UART_LSR_TEMT) - return TIOCSER_TEMT; - - return 0; -} - -static void siu_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - uint8_t mcr = 0; - - if (mctrl & TIOCM_DTR) - mcr |= UART_MCR_DTR; - if (mctrl & TIOCM_RTS) - mcr |= UART_MCR_RTS; - if (mctrl & TIOCM_OUT1) - mcr |= UART_MCR_OUT1; - if (mctrl & TIOCM_OUT2) - mcr |= UART_MCR_OUT2; - if (mctrl & TIOCM_LOOP) - mcr |= UART_MCR_LOOP; - - siu_write(port, UART_MCR, mcr); -} - -static unsigned int siu_get_mctrl(struct uart_port *port) -{ - uint8_t msr; - unsigned int mctrl = 0; - - msr = siu_read(port, UART_MSR); - if (msr & UART_MSR_DCD) - mctrl |= TIOCM_CAR; - if (msr & UART_MSR_RI) - mctrl |= TIOCM_RNG; - if (msr & UART_MSR_DSR) - mctrl |= TIOCM_DSR; - if (msr & UART_MSR_CTS) - mctrl |= TIOCM_CTS; - - return mctrl; -} - -static void siu_stop_tx(struct uart_port *port) -{ - unsigned long flags; - uint8_t ier; - - spin_lock_irqsave(&port->lock, flags); - - ier = siu_read(port, UART_IER); - ier &= ~UART_IER_THRI; - siu_write(port, UART_IER, ier); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void siu_start_tx(struct uart_port *port) -{ - unsigned long flags; - uint8_t ier; - - spin_lock_irqsave(&port->lock, flags); - - ier = siu_read(port, UART_IER); - ier |= UART_IER_THRI; - siu_write(port, UART_IER, ier); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void siu_stop_rx(struct uart_port *port) -{ - unsigned long flags; - uint8_t ier; - - spin_lock_irqsave(&port->lock, flags); - - ier = siu_read(port, UART_IER); - ier &= ~UART_IER_RLSI; - siu_write(port, UART_IER, ier); - - port->read_status_mask &= ~UART_LSR_DR; - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void siu_enable_ms(struct uart_port *port) -{ - unsigned long flags; - uint8_t ier; - - spin_lock_irqsave(&port->lock, flags); - - ier = siu_read(port, UART_IER); - ier |= UART_IER_MSI; - siu_write(port, UART_IER, ier); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void siu_break_ctl(struct uart_port *port, int ctl) -{ - unsigned long flags; - uint8_t lcr; - - spin_lock_irqsave(&port->lock, flags); - - lcr = siu_read(port, UART_LCR); - if (ctl == -1) - lcr |= UART_LCR_SBC; - else - lcr &= ~UART_LCR_SBC; - siu_write(port, UART_LCR, lcr); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static inline void receive_chars(struct uart_port *port, uint8_t *status) -{ - struct tty_struct *tty; - uint8_t lsr, ch; - char flag; - int max_count = RX_MAX_COUNT; - - tty = port->state->port.tty; - lsr = *status; - - do { - ch = siu_read(port, UART_RX); - port->icount.rx++; - flag = TTY_NORMAL; - -#ifdef CONFIG_SERIAL_VR41XX_CONSOLE - lsr |= lsr_break_flag[port->line]; - lsr_break_flag[port->line] = 0; -#endif - if (unlikely(lsr & (UART_LSR_BI | UART_LSR_FE | - UART_LSR_PE | UART_LSR_OE))) { - if (lsr & UART_LSR_BI) { - lsr &= ~(UART_LSR_FE | UART_LSR_PE); - port->icount.brk++; - - if (uart_handle_break(port)) - goto ignore_char; - } - - if (lsr & UART_LSR_FE) - port->icount.frame++; - if (lsr & UART_LSR_PE) - port->icount.parity++; - if (lsr & UART_LSR_OE) - port->icount.overrun++; - - lsr &= port->read_status_mask; - if (lsr & UART_LSR_BI) - flag = TTY_BREAK; - if (lsr & UART_LSR_FE) - flag = TTY_FRAME; - if (lsr & UART_LSR_PE) - flag = TTY_PARITY; - } - - if (uart_handle_sysrq_char(port, ch)) - goto ignore_char; - - uart_insert_char(port, lsr, UART_LSR_OE, ch, flag); - - ignore_char: - lsr = siu_read(port, UART_LSR); - } while ((lsr & UART_LSR_DR) && (max_count-- > 0)); - - tty_flip_buffer_push(tty); - - *status = lsr; -} - -static inline void check_modem_status(struct uart_port *port) -{ - uint8_t msr; - - msr = siu_read(port, UART_MSR); - if ((msr & UART_MSR_ANY_DELTA) == 0) - return; - if (msr & UART_MSR_DDCD) - uart_handle_dcd_change(port, msr & UART_MSR_DCD); - if (msr & UART_MSR_TERI) - port->icount.rng++; - if (msr & UART_MSR_DDSR) - port->icount.dsr++; - if (msr & UART_MSR_DCTS) - uart_handle_cts_change(port, msr & UART_MSR_CTS); - - wake_up_interruptible(&port->state->port.delta_msr_wait); -} - -static inline void transmit_chars(struct uart_port *port) -{ - struct circ_buf *xmit; - int max_count = TX_MAX_COUNT; - - xmit = &port->state->xmit; - - if (port->x_char) { - siu_write(port, UART_TX, port->x_char); - port->icount.tx++; - port->x_char = 0; - return; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - siu_stop_tx(port); - return; - } - - do { - siu_write(port, UART_TX, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (max_count-- > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - siu_stop_tx(port); -} - -static irqreturn_t siu_interrupt(int irq, void *dev_id) -{ - struct uart_port *port; - uint8_t iir, lsr; - - port = (struct uart_port *)dev_id; - - iir = siu_read(port, UART_IIR); - if (iir & UART_IIR_NO_INT) - return IRQ_NONE; - - lsr = siu_read(port, UART_LSR); - if (lsr & UART_LSR_DR) - receive_chars(port, &lsr); - - check_modem_status(port); - - if (lsr & UART_LSR_THRE) - transmit_chars(port); - - return IRQ_HANDLED; -} - -static int siu_startup(struct uart_port *port) -{ - int retval; - - if (port->membase == NULL) - return -ENODEV; - - siu_clear_fifo(port); - - (void)siu_read(port, UART_LSR); - (void)siu_read(port, UART_RX); - (void)siu_read(port, UART_IIR); - (void)siu_read(port, UART_MSR); - - if (siu_read(port, UART_LSR) == 0xff) - return -ENODEV; - - retval = request_irq(port->irq, siu_interrupt, 0, siu_type_name(port), port); - if (retval) - return retval; - - if (port->type == PORT_VR41XX_DSIU) - vr41xx_enable_dsiuint(DSIUINT_ALL); - - siu_write(port, UART_LCR, UART_LCR_WLEN8); - - spin_lock_irq(&port->lock); - siu_set_mctrl(port, port->mctrl); - spin_unlock_irq(&port->lock); - - siu_write(port, UART_IER, UART_IER_RLSI | UART_IER_RDI); - - (void)siu_read(port, UART_LSR); - (void)siu_read(port, UART_RX); - (void)siu_read(port, UART_IIR); - (void)siu_read(port, UART_MSR); - - return 0; -} - -static void siu_shutdown(struct uart_port *port) -{ - unsigned long flags; - uint8_t lcr; - - siu_write(port, UART_IER, 0); - - spin_lock_irqsave(&port->lock, flags); - - port->mctrl &= ~TIOCM_OUT2; - siu_set_mctrl(port, port->mctrl); - - spin_unlock_irqrestore(&port->lock, flags); - - lcr = siu_read(port, UART_LCR); - lcr &= ~UART_LCR_SBC; - siu_write(port, UART_LCR, lcr); - - siu_clear_fifo(port); - - (void)siu_read(port, UART_RX); - - if (port->type == PORT_VR41XX_DSIU) - vr41xx_disable_dsiuint(DSIUINT_ALL); - - free_irq(port->irq, port); -} - -static void siu_set_termios(struct uart_port *port, struct ktermios *new, - struct ktermios *old) -{ - tcflag_t c_cflag, c_iflag; - uint8_t lcr, fcr, ier; - unsigned int baud, quot; - unsigned long flags; - - c_cflag = new->c_cflag; - switch (c_cflag & CSIZE) { - case CS5: - lcr = UART_LCR_WLEN5; - break; - case CS6: - lcr = UART_LCR_WLEN6; - break; - case CS7: - lcr = UART_LCR_WLEN7; - break; - default: - lcr = UART_LCR_WLEN8; - break; - } - - if (c_cflag & CSTOPB) - lcr |= UART_LCR_STOP; - if (c_cflag & PARENB) - lcr |= UART_LCR_PARITY; - if ((c_cflag & PARODD) != PARODD) - lcr |= UART_LCR_EPAR; - if (c_cflag & CMSPAR) - lcr |= UART_LCR_SPAR; - - baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10; - - spin_lock_irqsave(&port->lock, flags); - - uart_update_timeout(port, c_cflag, baud); - - c_iflag = new->c_iflag; - - port->read_status_mask = UART_LSR_THRE | UART_LSR_OE | UART_LSR_DR; - if (c_iflag & INPCK) - port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= UART_LSR_BI; - - port->ignore_status_mask = 0; - if (c_iflag & IGNPAR) - port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (c_iflag & IGNBRK) { - port->ignore_status_mask |= UART_LSR_BI; - if (c_iflag & IGNPAR) - port->ignore_status_mask |= UART_LSR_OE; - } - - if ((c_cflag & CREAD) == 0) - port->ignore_status_mask |= UART_LSR_DR; - - ier = siu_read(port, UART_IER); - ier &= ~UART_IER_MSI; - if (UART_ENABLE_MS(port, c_cflag)) - ier |= UART_IER_MSI; - siu_write(port, UART_IER, ier); - - siu_write(port, UART_LCR, lcr | UART_LCR_DLAB); - - siu_write(port, UART_DLL, (uint8_t)quot); - siu_write(port, UART_DLM, (uint8_t)(quot >> 8)); - - siu_write(port, UART_LCR, lcr); - - siu_write(port, UART_FCR, fcr); - - siu_set_mctrl(port, port->mctrl); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void siu_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) -{ - switch (state) { - case 0: - switch (port->type) { - case PORT_VR41XX_SIU: - vr41xx_supply_clock(SIU_CLOCK); - break; - case PORT_VR41XX_DSIU: - vr41xx_supply_clock(DSIU_CLOCK); - break; - } - break; - case 3: - switch (port->type) { - case PORT_VR41XX_SIU: - vr41xx_mask_clock(SIU_CLOCK); - break; - case PORT_VR41XX_DSIU: - vr41xx_mask_clock(DSIU_CLOCK); - break; - } - break; - } -} - -static const char *siu_type(struct uart_port *port) -{ - return siu_type_name(port); -} - -static void siu_release_port(struct uart_port *port) -{ - unsigned long size; - - if (port->flags & UPF_IOREMAP) { - iounmap(port->membase); - port->membase = NULL; - } - - size = siu_port_size(port); - release_mem_region(port->mapbase, size); -} - -static int siu_request_port(struct uart_port *port) -{ - unsigned long size; - struct resource *res; - - size = siu_port_size(port); - res = request_mem_region(port->mapbase, size, siu_type_name(port)); - if (res == NULL) - return -EBUSY; - - if (port->flags & UPF_IOREMAP) { - port->membase = ioremap(port->mapbase, size); - if (port->membase == NULL) { - release_resource(res); - return -ENOMEM; - } - } - - return 0; -} - -static void siu_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = siu_check_type(port); - (void)siu_request_port(port); - } -} - -static int siu_verify_port(struct uart_port *port, struct serial_struct *serial) -{ - if (port->type != PORT_VR41XX_SIU && port->type != PORT_VR41XX_DSIU) - return -EINVAL; - if (port->irq != serial->irq) - return -EINVAL; - if (port->iotype != serial->io_type) - return -EINVAL; - if (port->mapbase != (unsigned long)serial->iomem_base) - return -EINVAL; - - return 0; -} - -static struct uart_ops siu_uart_ops = { - .tx_empty = siu_tx_empty, - .set_mctrl = siu_set_mctrl, - .get_mctrl = siu_get_mctrl, - .stop_tx = siu_stop_tx, - .start_tx = siu_start_tx, - .stop_rx = siu_stop_rx, - .enable_ms = siu_enable_ms, - .break_ctl = siu_break_ctl, - .startup = siu_startup, - .shutdown = siu_shutdown, - .set_termios = siu_set_termios, - .pm = siu_pm, - .type = siu_type, - .release_port = siu_release_port, - .request_port = siu_request_port, - .config_port = siu_config_port, - .verify_port = siu_verify_port, -}; - -static int siu_init_ports(struct platform_device *pdev) -{ - struct uart_port *port; - struct resource *res; - int *type = pdev->dev.platform_data; - int i; - - if (!type) - return 0; - - port = siu_uart_ports; - for (i = 0; i < SIU_PORTS_MAX; i++) { - port->type = type[i]; - if (port->type == PORT_UNKNOWN) - continue; - port->irq = platform_get_irq(pdev, i); - port->uartclk = SIU_BAUD_BASE * 16; - port->fifosize = 16; - port->regshift = 0; - port->iotype = UPIO_MEM; - port->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; - port->line = i; - res = platform_get_resource(pdev, IORESOURCE_MEM, i); - port->mapbase = res->start; - port++; - } - - return i; -} - -#ifdef CONFIG_SERIAL_VR41XX_CONSOLE - -#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) - -static void wait_for_xmitr(struct uart_port *port) -{ - int timeout = 10000; - uint8_t lsr, msr; - - do { - lsr = siu_read(port, UART_LSR); - if (lsr & UART_LSR_BI) - lsr_break_flag[port->line] = UART_LSR_BI; - - if ((lsr & BOTH_EMPTY) == BOTH_EMPTY) - break; - } while (timeout-- > 0); - - if (port->flags & UPF_CONS_FLOW) { - timeout = 1000000; - - do { - msr = siu_read(port, UART_MSR); - if ((msr & UART_MSR_CTS) != 0) - break; - } while (timeout-- > 0); - } -} - -static void siu_console_putchar(struct uart_port *port, int ch) -{ - wait_for_xmitr(port); - siu_write(port, UART_TX, ch); -} - -static void siu_console_write(struct console *con, const char *s, unsigned count) -{ - struct uart_port *port; - uint8_t ier; - - port = &siu_uart_ports[con->index]; - - ier = siu_read(port, UART_IER); - siu_write(port, UART_IER, 0); - - uart_console_write(port, s, count, siu_console_putchar); - - wait_for_xmitr(port); - siu_write(port, UART_IER, ier); -} - -static int __init siu_console_setup(struct console *con, char *options) -{ - struct uart_port *port; - int baud = 9600; - int parity = 'n'; - int bits = 8; - int flow = 'n'; - - if (con->index >= SIU_PORTS_MAX) - con->index = 0; - - port = &siu_uart_ports[con->index]; - if (port->membase == NULL) { - if (port->mapbase == 0) - return -ENODEV; - port->membase = ioremap(port->mapbase, siu_port_size(port)); - } - - if (port->type == PORT_VR41XX_SIU) - vr41xx_select_siu_interface(SIU_INTERFACE_RS232C); - - if (options != NULL) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, con, baud, parity, bits, flow); -} - -static struct uart_driver siu_uart_driver; - -static struct console siu_console = { - .name = "ttyVR", - .write = siu_console_write, - .device = uart_console_device, - .setup = siu_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &siu_uart_driver, -}; - -static int __devinit siu_console_init(void) -{ - struct uart_port *port; - int i; - - for (i = 0; i < SIU_PORTS_MAX; i++) { - port = &siu_uart_ports[i]; - port->ops = &siu_uart_ops; - } - - register_console(&siu_console); - - return 0; -} - -console_initcall(siu_console_init); - -void __init vr41xx_siu_early_setup(struct uart_port *port) -{ - if (port->type == PORT_UNKNOWN) - return; - - siu_uart_ports[port->line].line = port->line; - siu_uart_ports[port->line].type = port->type; - siu_uart_ports[port->line].uartclk = SIU_BAUD_BASE * 16; - siu_uart_ports[port->line].mapbase = port->mapbase; - siu_uart_ports[port->line].mapbase = port->mapbase; - siu_uart_ports[port->line].ops = &siu_uart_ops; -} - -#define SERIAL_VR41XX_CONSOLE &siu_console -#else -#define SERIAL_VR41XX_CONSOLE NULL -#endif - -static struct uart_driver siu_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "SIU", - .dev_name = "ttyVR", - .major = SIU_MAJOR, - .minor = SIU_MINOR_BASE, - .cons = SERIAL_VR41XX_CONSOLE, -}; - -static int __devinit siu_probe(struct platform_device *dev) -{ - struct uart_port *port; - int num, i, retval; - - num = siu_init_ports(dev); - if (num <= 0) - return -ENODEV; - - siu_uart_driver.nr = num; - retval = uart_register_driver(&siu_uart_driver); - if (retval) - return retval; - - for (i = 0; i < num; i++) { - port = &siu_uart_ports[i]; - port->ops = &siu_uart_ops; - port->dev = &dev->dev; - - retval = uart_add_one_port(&siu_uart_driver, port); - if (retval < 0) { - port->dev = NULL; - break; - } - } - - if (i == 0 && retval < 0) { - uart_unregister_driver(&siu_uart_driver); - return retval; - } - - return 0; -} - -static int __devexit siu_remove(struct platform_device *dev) -{ - struct uart_port *port; - int i; - - for (i = 0; i < siu_uart_driver.nr; i++) { - port = &siu_uart_ports[i]; - if (port->dev == &dev->dev) { - uart_remove_one_port(&siu_uart_driver, port); - port->dev = NULL; - } - } - - uart_unregister_driver(&siu_uart_driver); - - return 0; -} - -static int siu_suspend(struct platform_device *dev, pm_message_t state) -{ - struct uart_port *port; - int i; - - for (i = 0; i < siu_uart_driver.nr; i++) { - port = &siu_uart_ports[i]; - if ((port->type == PORT_VR41XX_SIU || - port->type == PORT_VR41XX_DSIU) && port->dev == &dev->dev) - uart_suspend_port(&siu_uart_driver, port); - - } - - return 0; -} - -static int siu_resume(struct platform_device *dev) -{ - struct uart_port *port; - int i; - - for (i = 0; i < siu_uart_driver.nr; i++) { - port = &siu_uart_ports[i]; - if ((port->type == PORT_VR41XX_SIU || - port->type == PORT_VR41XX_DSIU) && port->dev == &dev->dev) - uart_resume_port(&siu_uart_driver, port); - } - - return 0; -} - -static struct platform_driver siu_device_driver = { - .probe = siu_probe, - .remove = __devexit_p(siu_remove), - .suspend = siu_suspend, - .resume = siu_resume, - .driver = { - .name = "SIU", - .owner = THIS_MODULE, - }, -}; - -static int __init vr41xx_siu_init(void) -{ - return platform_driver_register(&siu_device_driver); -} - -static void __exit vr41xx_siu_exit(void) -{ - platform_driver_unregister(&siu_device_driver); -} - -module_init(vr41xx_siu_init); -module_exit(vr41xx_siu_exit); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:SIU"); diff --git a/drivers/serial/vt8500_serial.c b/drivers/serial/vt8500_serial.c deleted file mode 100644 index 322bf56c0d89..000000000000 --- a/drivers/serial/vt8500_serial.c +++ /dev/null @@ -1,648 +0,0 @@ -/* - * drivers/serial/vt8500_serial.c - * - * Copyright (C) 2010 Alexey Charkov - * - * Based on msm_serial.c, which is: - * Copyright (C) 2007 Google, Inc. - * Author: Robert Love - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#if defined(CONFIG_SERIAL_VT8500_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -# define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * UART Register offsets - */ - -#define VT8500_URTDR 0x0000 /* Transmit data */ -#define VT8500_URRDR 0x0004 /* Receive data */ -#define VT8500_URDIV 0x0008 /* Clock/Baud rate divisor */ -#define VT8500_URLCR 0x000C /* Line control */ -#define VT8500_URICR 0x0010 /* IrDA control */ -#define VT8500_URIER 0x0014 /* Interrupt enable */ -#define VT8500_URISR 0x0018 /* Interrupt status */ -#define VT8500_URUSR 0x001c /* UART status */ -#define VT8500_URFCR 0x0020 /* FIFO control */ -#define VT8500_URFIDX 0x0024 /* FIFO index */ -#define VT8500_URBKR 0x0028 /* Break signal count */ -#define VT8500_URTOD 0x002c /* Time out divisor */ -#define VT8500_TXFIFO 0x1000 /* Transmit FIFO (16x8) */ -#define VT8500_RXFIFO 0x1020 /* Receive FIFO (16x10) */ - -/* - * Interrupt enable and status bits - */ - -#define TXDE (1 << 0) /* Tx Data empty */ -#define RXDF (1 << 1) /* Rx Data full */ -#define TXFAE (1 << 2) /* Tx FIFO almost empty */ -#define TXFE (1 << 3) /* Tx FIFO empty */ -#define RXFAF (1 << 4) /* Rx FIFO almost full */ -#define RXFF (1 << 5) /* Rx FIFO full */ -#define TXUDR (1 << 6) /* Tx underrun */ -#define RXOVER (1 << 7) /* Rx overrun */ -#define PER (1 << 8) /* Parity error */ -#define FER (1 << 9) /* Frame error */ -#define TCTS (1 << 10) /* Toggle of CTS */ -#define RXTOUT (1 << 11) /* Rx timeout */ -#define BKDONE (1 << 12) /* Break signal done */ -#define ERR (1 << 13) /* AHB error response */ - -#define RX_FIFO_INTS (RXFAF | RXFF | RXOVER | PER | FER | RXTOUT) -#define TX_FIFO_INTS (TXFAE | TXFE | TXUDR) - -struct vt8500_port { - struct uart_port uart; - char name[16]; - struct clk *clk; - unsigned int ier; -}; - -static inline void vt8500_write(struct uart_port *port, unsigned int val, - unsigned int off) -{ - writel(val, port->membase + off); -} - -static inline unsigned int vt8500_read(struct uart_port *port, unsigned int off) -{ - return readl(port->membase + off); -} - -static void vt8500_stop_tx(struct uart_port *port) -{ - struct vt8500_port *vt8500_port = container_of(port, - struct vt8500_port, - uart); - - vt8500_port->ier &= ~TX_FIFO_INTS; - vt8500_write(port, vt8500_port->ier, VT8500_URIER); -} - -static void vt8500_stop_rx(struct uart_port *port) -{ - struct vt8500_port *vt8500_port = container_of(port, - struct vt8500_port, - uart); - - vt8500_port->ier &= ~RX_FIFO_INTS; - vt8500_write(port, vt8500_port->ier, VT8500_URIER); -} - -static void vt8500_enable_ms(struct uart_port *port) -{ - struct vt8500_port *vt8500_port = container_of(port, - struct vt8500_port, - uart); - - vt8500_port->ier |= TCTS; - vt8500_write(port, vt8500_port->ier, VT8500_URIER); -} - -static void handle_rx(struct uart_port *port) -{ - struct tty_struct *tty = tty_port_tty_get(&port->state->port); - if (!tty) { - /* Discard data: no tty available */ - int count = (vt8500_read(port, VT8500_URFIDX) & 0x1f00) >> 8; - u16 ch; - while (count--) - ch = readw(port->membase + VT8500_RXFIFO); - return; - } - - /* - * Handle overrun - */ - if ((vt8500_read(port, VT8500_URISR) & RXOVER)) { - port->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - - /* and now the main RX loop */ - while (vt8500_read(port, VT8500_URFIDX) & 0x1f00) { - unsigned int c; - char flag = TTY_NORMAL; - - c = readw(port->membase + VT8500_RXFIFO) & 0x3ff; - - /* Mask conditions we're ignorning. */ - c &= ~port->read_status_mask; - - if (c & FER) { - port->icount.frame++; - flag = TTY_FRAME; - } else if (c & PER) { - port->icount.parity++; - flag = TTY_PARITY; - } - port->icount.rx++; - - if (!uart_handle_sysrq_char(port, c)) - tty_insert_flip_char(tty, c, flag); - } - - tty_flip_buffer_push(tty); - tty_kref_put(tty); -} - -static void handle_tx(struct uart_port *port) -{ - struct circ_buf *xmit = &port->state->xmit; - - if (port->x_char) { - writeb(port->x_char, port->membase + VT8500_TXFIFO); - port->icount.tx++; - port->x_char = 0; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - vt8500_stop_tx(port); - return; - } - - while ((vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16) { - if (uart_circ_empty(xmit)) - break; - - writeb(xmit->buf[xmit->tail], port->membase + VT8500_TXFIFO); - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - vt8500_stop_tx(port); -} - -static void vt8500_start_tx(struct uart_port *port) -{ - struct vt8500_port *vt8500_port = container_of(port, - struct vt8500_port, - uart); - - vt8500_port->ier &= ~TX_FIFO_INTS; - vt8500_write(port, vt8500_port->ier, VT8500_URIER); - handle_tx(port); - vt8500_port->ier |= TX_FIFO_INTS; - vt8500_write(port, vt8500_port->ier, VT8500_URIER); -} - -static void handle_delta_cts(struct uart_port *port) -{ - port->icount.cts++; - wake_up_interruptible(&port->state->port.delta_msr_wait); -} - -static irqreturn_t vt8500_irq(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - unsigned long isr; - - spin_lock(&port->lock); - isr = vt8500_read(port, VT8500_URISR); - - /* Acknowledge active status bits */ - vt8500_write(port, isr, VT8500_URISR); - - if (isr & RX_FIFO_INTS) - handle_rx(port); - if (isr & TX_FIFO_INTS) - handle_tx(port); - if (isr & TCTS) - handle_delta_cts(port); - - spin_unlock(&port->lock); - - return IRQ_HANDLED; -} - -static unsigned int vt8500_tx_empty(struct uart_port *port) -{ - return (vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16 ? - TIOCSER_TEMT : 0; -} - -static unsigned int vt8500_get_mctrl(struct uart_port *port) -{ - unsigned int usr; - - usr = vt8500_read(port, VT8500_URUSR); - if (usr & (1 << 4)) - return TIOCM_CTS; - else - return 0; -} - -static void vt8500_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -static void vt8500_break_ctl(struct uart_port *port, int break_ctl) -{ - if (break_ctl) - vt8500_write(port, vt8500_read(port, VT8500_URLCR) | (1 << 9), - VT8500_URLCR); -} - -static int vt8500_set_baud_rate(struct uart_port *port, unsigned int baud) -{ - unsigned long div; - unsigned int loops = 1000; - - div = vt8500_read(port, VT8500_URDIV) & ~(0x3ff); - - if (unlikely((baud < 900) || (baud > 921600))) - div |= 7; - else - div |= (921600 / baud) - 1; - - while ((vt8500_read(port, VT8500_URUSR) & (1 << 5)) && --loops) - cpu_relax(); - vt8500_write(port, div, VT8500_URDIV); - - return baud; -} - -static int vt8500_startup(struct uart_port *port) -{ - struct vt8500_port *vt8500_port = - container_of(port, struct vt8500_port, uart); - int ret; - - snprintf(vt8500_port->name, sizeof(vt8500_port->name), - "vt8500_serial%d", port->line); - - ret = request_irq(port->irq, vt8500_irq, IRQF_TRIGGER_HIGH, - vt8500_port->name, port); - if (unlikely(ret)) - return ret; - - vt8500_write(port, 0x03, VT8500_URLCR); /* enable TX & RX */ - - return 0; -} - -static void vt8500_shutdown(struct uart_port *port) -{ - struct vt8500_port *vt8500_port = - container_of(port, struct vt8500_port, uart); - - vt8500_port->ier = 0; - - /* disable interrupts and FIFOs */ - vt8500_write(&vt8500_port->uart, 0, VT8500_URIER); - vt8500_write(&vt8500_port->uart, 0x880, VT8500_URFCR); - free_irq(port->irq, port); -} - -static void vt8500_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - struct vt8500_port *vt8500_port = - container_of(port, struct vt8500_port, uart); - unsigned long flags; - unsigned int baud, lcr; - unsigned int loops = 1000; - - spin_lock_irqsave(&port->lock, flags); - - /* calculate and set baud rate */ - baud = uart_get_baud_rate(port, termios, old, 900, 921600); - baud = vt8500_set_baud_rate(port, baud); - if (tty_termios_baud_rate(termios)) - tty_termios_encode_baud_rate(termios, baud, baud); - - /* calculate parity */ - lcr = vt8500_read(&vt8500_port->uart, VT8500_URLCR); - lcr &= ~((1 << 5) | (1 << 4)); - if (termios->c_cflag & PARENB) { - lcr |= (1 << 4); - termios->c_cflag &= ~CMSPAR; - if (termios->c_cflag & PARODD) - lcr |= (1 << 5); - } - - /* calculate bits per char */ - lcr &= ~(1 << 2); - switch (termios->c_cflag & CSIZE) { - case CS7: - break; - case CS8: - default: - lcr |= (1 << 2); - termios->c_cflag &= ~CSIZE; - termios->c_cflag |= CS8; - break; - } - - /* calculate stop bits */ - lcr &= ~(1 << 3); - if (termios->c_cflag & CSTOPB) - lcr |= (1 << 3); - - /* set parity, bits per char, and stop bit */ - vt8500_write(&vt8500_port->uart, lcr, VT8500_URLCR); - - /* Configure status bits to ignore based on termio flags. */ - port->read_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->read_status_mask = FER | PER; - - uart_update_timeout(port, termios->c_cflag, baud); - - /* Reset FIFOs */ - vt8500_write(&vt8500_port->uart, 0x88c, VT8500_URFCR); - while ((vt8500_read(&vt8500_port->uart, VT8500_URFCR) & 0xc) - && --loops) - cpu_relax(); - - /* Every possible FIFO-related interrupt */ - vt8500_port->ier = RX_FIFO_INTS | TX_FIFO_INTS; - - /* - * CTS flow control - */ - if (UART_ENABLE_MS(&vt8500_port->uart, termios->c_cflag)) - vt8500_port->ier |= TCTS; - - vt8500_write(&vt8500_port->uart, 0x881, VT8500_URFCR); - vt8500_write(&vt8500_port->uart, vt8500_port->ier, VT8500_URIER); - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *vt8500_type(struct uart_port *port) -{ - struct vt8500_port *vt8500_port = - container_of(port, struct vt8500_port, uart); - return vt8500_port->name; -} - -static void vt8500_release_port(struct uart_port *port) -{ -} - -static int vt8500_request_port(struct uart_port *port) -{ - return 0; -} - -static void vt8500_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_VT8500; -} - -static int vt8500_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_VT8500)) - return -EINVAL; - if (unlikely(port->irq != ser->irq)) - return -EINVAL; - return 0; -} - -static struct vt8500_port *vt8500_uart_ports[4]; -static struct uart_driver vt8500_uart_driver; - -#ifdef CONFIG_SERIAL_VT8500_CONSOLE - -static inline void wait_for_xmitr(struct uart_port *port) -{ - unsigned int status, tmout = 10000; - - /* Wait up to 10ms for the character(s) to be sent. */ - do { - status = vt8500_read(port, VT8500_URFIDX); - - if (--tmout == 0) - break; - udelay(1); - } while (status & 0x10); -} - -static void vt8500_console_putchar(struct uart_port *port, int c) -{ - wait_for_xmitr(port); - writeb(c, port->membase + VT8500_TXFIFO); -} - -static void vt8500_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct vt8500_port *vt8500_port = vt8500_uart_ports[co->index]; - unsigned long ier; - - BUG_ON(co->index < 0 || co->index >= vt8500_uart_driver.nr); - - ier = vt8500_read(&vt8500_port->uart, VT8500_URIER); - vt8500_write(&vt8500_port->uart, VT8500_URIER, 0); - - uart_console_write(&vt8500_port->uart, s, count, - vt8500_console_putchar); - - /* - * Finally, wait for transmitter to become empty - * and switch back to FIFO - */ - wait_for_xmitr(&vt8500_port->uart); - vt8500_write(&vt8500_port->uart, VT8500_URIER, ier); -} - -static int __init vt8500_console_setup(struct console *co, char *options) -{ - struct vt8500_port *vt8500_port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (unlikely(co->index >= vt8500_uart_driver.nr || co->index < 0)) - return -ENXIO; - - vt8500_port = vt8500_uart_ports[co->index]; - - if (!vt8500_port) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(&vt8500_port->uart, - co, baud, parity, bits, flow); -} - -static struct console vt8500_console = { - .name = "ttyWMT", - .write = vt8500_console_write, - .device = uart_console_device, - .setup = vt8500_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &vt8500_uart_driver, -}; - -#define VT8500_CONSOLE (&vt8500_console) - -#else -#define VT8500_CONSOLE NULL -#endif - -static struct uart_ops vt8500_uart_pops = { - .tx_empty = vt8500_tx_empty, - .set_mctrl = vt8500_set_mctrl, - .get_mctrl = vt8500_get_mctrl, - .stop_tx = vt8500_stop_tx, - .start_tx = vt8500_start_tx, - .stop_rx = vt8500_stop_rx, - .enable_ms = vt8500_enable_ms, - .break_ctl = vt8500_break_ctl, - .startup = vt8500_startup, - .shutdown = vt8500_shutdown, - .set_termios = vt8500_set_termios, - .type = vt8500_type, - .release_port = vt8500_release_port, - .request_port = vt8500_request_port, - .config_port = vt8500_config_port, - .verify_port = vt8500_verify_port, -}; - -static struct uart_driver vt8500_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "vt8500_serial", - .dev_name = "ttyWMT", - .nr = 6, - .cons = VT8500_CONSOLE, -}; - -static int __init vt8500_serial_probe(struct platform_device *pdev) -{ - struct vt8500_port *vt8500_port; - struct resource *mmres, *irqres; - int ret; - - mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!mmres || !irqres) - return -ENODEV; - - vt8500_port = kzalloc(sizeof(struct vt8500_port), GFP_KERNEL); - if (!vt8500_port) - return -ENOMEM; - - vt8500_port->uart.type = PORT_VT8500; - vt8500_port->uart.iotype = UPIO_MEM; - vt8500_port->uart.mapbase = mmres->start; - vt8500_port->uart.irq = irqres->start; - vt8500_port->uart.fifosize = 16; - vt8500_port->uart.ops = &vt8500_uart_pops; - vt8500_port->uart.line = pdev->id; - vt8500_port->uart.dev = &pdev->dev; - vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; - vt8500_port->uart.uartclk = 24000000; - - snprintf(vt8500_port->name, sizeof(vt8500_port->name), - "VT8500 UART%d", pdev->id); - - vt8500_port->uart.membase = ioremap(mmres->start, - mmres->end - mmres->start + 1); - if (!vt8500_port->uart.membase) { - ret = -ENOMEM; - goto err; - } - - vt8500_uart_ports[pdev->id] = vt8500_port; - - uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart); - - platform_set_drvdata(pdev, vt8500_port); - - return 0; - -err: - kfree(vt8500_port); - return ret; -} - -static int __devexit vt8500_serial_remove(struct platform_device *pdev) -{ - struct vt8500_port *vt8500_port = platform_get_drvdata(pdev); - - platform_set_drvdata(pdev, NULL); - uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart); - kfree(vt8500_port); - - return 0; -} - -static struct platform_driver vt8500_platform_driver = { - .probe = vt8500_serial_probe, - .remove = vt8500_serial_remove, - .driver = { - .name = "vt8500_serial", - .owner = THIS_MODULE, - }, -}; - -static int __init vt8500_serial_init(void) -{ - int ret; - - ret = uart_register_driver(&vt8500_uart_driver); - if (unlikely(ret)) - return ret; - - ret = platform_driver_register(&vt8500_platform_driver); - - if (unlikely(ret)) - uart_unregister_driver(&vt8500_uart_driver); - - return ret; -} - -static void __exit vt8500_serial_exit(void) -{ -#ifdef CONFIG_SERIAL_VT8500_CONSOLE - unregister_console(&vt8500_console); -#endif - platform_driver_unregister(&vt8500_platform_driver); - uart_unregister_driver(&vt8500_uart_driver); -} - -module_init(vt8500_serial_init); -module_exit(vt8500_serial_exit); - -MODULE_AUTHOR("Alexey Charkov "); -MODULE_DESCRIPTION("Driver for vt8500 serial device"); -MODULE_LICENSE("GPL"); diff --git a/drivers/serial/zs.c b/drivers/serial/zs.c deleted file mode 100644 index 1a7fd3e70315..000000000000 --- a/drivers/serial/zs.c +++ /dev/null @@ -1,1304 +0,0 @@ -/* - * zs.c: Serial port driver for IOASIC DECstations. - * - * Derived from drivers/sbus/char/sunserial.c by Paul Mackerras. - * Derived from drivers/macintosh/macserial.c by Harald Koerfgen. - * - * DECstation changes - * Copyright (C) 1998-2000 Harald Koerfgen - * Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2007 Maciej W. Rozycki - * - * For the rest of the code the original Copyright applies: - * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * - * - * Note: for IOASIC systems the wiring is as follows: - * - * mouse/keyboard: - * DIN-7 MJ-4 signal SCC - * 2 1 TxD <- A.TxD - * 3 4 RxD -> A.RxD - * - * EIA-232/EIA-423: - * DB-25 MMJ-6 signal SCC - * 2 2 TxD <- B.TxD - * 3 5 RxD -> B.RxD - * 4 RTS <- ~A.RTS - * 5 CTS -> ~B.CTS - * 6 6 DSR -> ~A.SYNC - * 8 CD -> ~B.DCD - * 12 DSRS(DCE) -> ~A.CTS (*) - * 15 TxC -> B.TxC - * 17 RxC -> B.RxC - * 20 1 DTR <- ~A.DTR - * 22 RI -> ~A.DCD - * 23 DSRS(DTE) <- ~B.RTS - * - * (*) EIA-232 defines the signal at this pin to be SCD, while DSRS(DCE) - * is shared with DSRS(DTE) at pin 23. - * - * As you can immediately notice the wiring of the RTS, DTR and DSR signals - * is a bit odd. This makes the handling of port B unnecessarily - * complicated and prevents the use of some automatic modes of operation. - */ - -#if defined(CONFIG_SERIAL_ZS_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include "zs.h" - - -MODULE_AUTHOR("Maciej W. Rozycki "); -MODULE_DESCRIPTION("DECstation Z85C30 serial driver"); -MODULE_LICENSE("GPL"); - - -static char zs_name[] __initdata = "DECstation Z85C30 serial driver version "; -static char zs_version[] __initdata = "0.10"; - -/* - * It would be nice to dynamically allocate everything that - * depends on ZS_NUM_SCCS, so we could support any number of - * Z85C30s, but for now... - */ -#define ZS_NUM_SCCS 2 /* Max # of ZS chips supported. */ -#define ZS_NUM_CHAN 2 /* 2 channels per chip. */ -#define ZS_CHAN_A 0 /* Index of the channel A. */ -#define ZS_CHAN_B 1 /* Index of the channel B. */ -#define ZS_CHAN_IO_SIZE 8 /* IOMEM space size. */ -#define ZS_CHAN_IO_STRIDE 4 /* Register alignment. */ -#define ZS_CHAN_IO_OFFSET 1 /* The SCC resides on the high byte - of the 16-bit IOBUS. */ -#define ZS_CLOCK 7372800 /* Z85C30 PCLK input clock rate. */ - -#define to_zport(uport) container_of(uport, struct zs_port, port) - -struct zs_parms { - resource_size_t scc[ZS_NUM_SCCS]; - int irq[ZS_NUM_SCCS]; -}; - -static struct zs_scc zs_sccs[ZS_NUM_SCCS]; - -static u8 zs_init_regs[ZS_NUM_REGS] __initdata = { - 0, /* write 0 */ - PAR_SPEC, /* write 1 */ - 0, /* write 2 */ - 0, /* write 3 */ - X16CLK | SB1, /* write 4 */ - 0, /* write 5 */ - 0, 0, 0, /* write 6, 7, 8 */ - MIE | DLC | NV, /* write 9 */ - NRZ, /* write 10 */ - TCBR | RCBR, /* write 11 */ - 0, 0, /* BRG time constant, write 12 + 13 */ - BRSRC | BRENABL, /* write 14 */ - 0, /* write 15 */ -}; - -/* - * Debugging. - */ -#undef ZS_DEBUG_REGS - - -/* - * Reading and writing Z85C30 registers. - */ -static void recovery_delay(void) -{ - udelay(2); -} - -static u8 read_zsreg(struct zs_port *zport, int reg) -{ - void __iomem *control = zport->port.membase + ZS_CHAN_IO_OFFSET; - u8 retval; - - if (reg != 0) { - writeb(reg & 0xf, control); - fast_iob(); - recovery_delay(); - } - retval = readb(control); - recovery_delay(); - return retval; -} - -static void write_zsreg(struct zs_port *zport, int reg, u8 value) -{ - void __iomem *control = zport->port.membase + ZS_CHAN_IO_OFFSET; - - if (reg != 0) { - writeb(reg & 0xf, control); - fast_iob(); recovery_delay(); - } - writeb(value, control); - fast_iob(); - recovery_delay(); - return; -} - -static u8 read_zsdata(struct zs_port *zport) -{ - void __iomem *data = zport->port.membase + - ZS_CHAN_IO_STRIDE + ZS_CHAN_IO_OFFSET; - u8 retval; - - retval = readb(data); - recovery_delay(); - return retval; -} - -static void write_zsdata(struct zs_port *zport, u8 value) -{ - void __iomem *data = zport->port.membase + - ZS_CHAN_IO_STRIDE + ZS_CHAN_IO_OFFSET; - - writeb(value, data); - fast_iob(); - recovery_delay(); - return; -} - -#ifdef ZS_DEBUG_REGS -void zs_dump(void) -{ - struct zs_port *zport; - int i, j; - - for (i = 0; i < ZS_NUM_SCCS * ZS_NUM_CHAN; i++) { - zport = &zs_sccs[i / ZS_NUM_CHAN].zport[i % ZS_NUM_CHAN]; - - if (!zport->scc) - continue; - - for (j = 0; j < 16; j++) - printk("W%-2d = 0x%02x\t", j, zport->regs[j]); - printk("\n"); - for (j = 0; j < 16; j++) - printk("R%-2d = 0x%02x\t", j, read_zsreg(zport, j)); - printk("\n\n"); - } -} -#endif - - -static void zs_spin_lock_cond_irq(spinlock_t *lock, int irq) -{ - if (irq) - spin_lock_irq(lock); - else - spin_lock(lock); -} - -static void zs_spin_unlock_cond_irq(spinlock_t *lock, int irq) -{ - if (irq) - spin_unlock_irq(lock); - else - spin_unlock(lock); -} - -static int zs_receive_drain(struct zs_port *zport) -{ - int loops = 10000; - - while ((read_zsreg(zport, R0) & Rx_CH_AV) && --loops) - read_zsdata(zport); - return loops; -} - -static int zs_transmit_drain(struct zs_port *zport, int irq) -{ - struct zs_scc *scc = zport->scc; - int loops = 10000; - - while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && --loops) { - zs_spin_unlock_cond_irq(&scc->zlock, irq); - udelay(2); - zs_spin_lock_cond_irq(&scc->zlock, irq); - } - return loops; -} - -static int zs_line_drain(struct zs_port *zport, int irq) -{ - struct zs_scc *scc = zport->scc; - int loops = 10000; - - while (!(read_zsreg(zport, R1) & ALL_SNT) && --loops) { - zs_spin_unlock_cond_irq(&scc->zlock, irq); - udelay(2); - zs_spin_lock_cond_irq(&scc->zlock, irq); - } - return loops; -} - - -static void load_zsregs(struct zs_port *zport, u8 *regs, int irq) -{ - /* Let the current transmission finish. */ - zs_line_drain(zport, irq); - /* Load 'em up. */ - write_zsreg(zport, R3, regs[3] & ~RxENABLE); - write_zsreg(zport, R5, regs[5] & ~TxENAB); - write_zsreg(zport, R4, regs[4]); - write_zsreg(zport, R9, regs[9]); - write_zsreg(zport, R1, regs[1]); - write_zsreg(zport, R2, regs[2]); - write_zsreg(zport, R10, regs[10]); - write_zsreg(zport, R14, regs[14] & ~BRENABL); - write_zsreg(zport, R11, regs[11]); - write_zsreg(zport, R12, regs[12]); - write_zsreg(zport, R13, regs[13]); - write_zsreg(zport, R14, regs[14]); - write_zsreg(zport, R15, regs[15]); - if (regs[3] & RxENABLE) - write_zsreg(zport, R3, regs[3]); - if (regs[5] & TxENAB) - write_zsreg(zport, R5, regs[5]); - return; -} - - -/* - * Status handling routines. - */ - -/* - * zs_tx_empty() -- get the transmitter empty status - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static unsigned int zs_tx_empty(struct uart_port *uport) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - unsigned long flags; - u8 status; - - spin_lock_irqsave(&scc->zlock, flags); - status = read_zsreg(zport, R1); - spin_unlock_irqrestore(&scc->zlock, flags); - - return status & ALL_SNT ? TIOCSER_TEMT : 0; -} - -static unsigned int zs_raw_get_ab_mctrl(struct zs_port *zport_a, - struct zs_port *zport_b) -{ - u8 status_a, status_b; - unsigned int mctrl; - - status_a = read_zsreg(zport_a, R0); - status_b = read_zsreg(zport_b, R0); - - mctrl = ((status_b & CTS) ? TIOCM_CTS : 0) | - ((status_b & DCD) ? TIOCM_CAR : 0) | - ((status_a & DCD) ? TIOCM_RNG : 0) | - ((status_a & SYNC_HUNT) ? TIOCM_DSR : 0); - - return mctrl; -} - -static unsigned int zs_raw_get_mctrl(struct zs_port *zport) -{ - struct zs_port *zport_a = &zport->scc->zport[ZS_CHAN_A]; - - return zport != zport_a ? zs_raw_get_ab_mctrl(zport_a, zport) : 0; -} - -static unsigned int zs_raw_xor_mctrl(struct zs_port *zport) -{ - struct zs_port *zport_a = &zport->scc->zport[ZS_CHAN_A]; - unsigned int mmask, mctrl, delta; - u8 mask_a, mask_b; - - if (zport == zport_a) - return 0; - - mask_a = zport_a->regs[15]; - mask_b = zport->regs[15]; - - mmask = ((mask_b & CTSIE) ? TIOCM_CTS : 0) | - ((mask_b & DCDIE) ? TIOCM_CAR : 0) | - ((mask_a & DCDIE) ? TIOCM_RNG : 0) | - ((mask_a & SYNCIE) ? TIOCM_DSR : 0); - - mctrl = zport->mctrl; - if (mmask) { - mctrl &= ~mmask; - mctrl |= zs_raw_get_ab_mctrl(zport_a, zport) & mmask; - } - - delta = mctrl ^ zport->mctrl; - if (delta) - zport->mctrl = mctrl; - - return delta; -} - -static unsigned int zs_get_mctrl(struct uart_port *uport) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - unsigned int mctrl; - - spin_lock(&scc->zlock); - mctrl = zs_raw_get_mctrl(zport); - spin_unlock(&scc->zlock); - - return mctrl; -} - -static void zs_set_mctrl(struct uart_port *uport, unsigned int mctrl) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; - u8 oldloop, newloop; - - spin_lock(&scc->zlock); - if (zport != zport_a) { - if (mctrl & TIOCM_DTR) - zport_a->regs[5] |= DTR; - else - zport_a->regs[5] &= ~DTR; - if (mctrl & TIOCM_RTS) - zport_a->regs[5] |= RTS; - else - zport_a->regs[5] &= ~RTS; - write_zsreg(zport_a, R5, zport_a->regs[5]); - } - - /* Rarely modified, so don't poke at hardware unless necessary. */ - oldloop = zport->regs[14]; - newloop = oldloop; - if (mctrl & TIOCM_LOOP) - newloop |= LOOPBAK; - else - newloop &= ~LOOPBAK; - if (newloop != oldloop) { - zport->regs[14] = newloop; - write_zsreg(zport, R14, zport->regs[14]); - } - spin_unlock(&scc->zlock); -} - -static void zs_raw_stop_tx(struct zs_port *zport) -{ - write_zsreg(zport, R0, RES_Tx_P); - zport->tx_stopped = 1; -} - -static void zs_stop_tx(struct uart_port *uport) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - - spin_lock(&scc->zlock); - zs_raw_stop_tx(zport); - spin_unlock(&scc->zlock); -} - -static void zs_raw_transmit_chars(struct zs_port *); - -static void zs_start_tx(struct uart_port *uport) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - - spin_lock(&scc->zlock); - if (zport->tx_stopped) { - zs_transmit_drain(zport, 0); - zport->tx_stopped = 0; - zs_raw_transmit_chars(zport); - } - spin_unlock(&scc->zlock); -} - -static void zs_stop_rx(struct uart_port *uport) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; - - spin_lock(&scc->zlock); - zport->regs[15] &= ~BRKIE; - zport->regs[1] &= ~(RxINT_MASK | TxINT_ENAB); - zport->regs[1] |= RxINT_DISAB; - - if (zport != zport_a) { - /* A-side DCD tracks RI and SYNC tracks DSR. */ - zport_a->regs[15] &= ~(DCDIE | SYNCIE); - write_zsreg(zport_a, R15, zport_a->regs[15]); - if (!(zport_a->regs[15] & BRKIE)) { - zport_a->regs[1] &= ~EXT_INT_ENAB; - write_zsreg(zport_a, R1, zport_a->regs[1]); - } - - /* This-side DCD tracks DCD and CTS tracks CTS. */ - zport->regs[15] &= ~(DCDIE | CTSIE); - zport->regs[1] &= ~EXT_INT_ENAB; - } else { - /* DCD tracks RI and SYNC tracks DSR for the B side. */ - if (!(zport->regs[15] & (DCDIE | SYNCIE))) - zport->regs[1] &= ~EXT_INT_ENAB; - } - - write_zsreg(zport, R15, zport->regs[15]); - write_zsreg(zport, R1, zport->regs[1]); - spin_unlock(&scc->zlock); -} - -static void zs_enable_ms(struct uart_port *uport) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; - - if (zport == zport_a) - return; - - spin_lock(&scc->zlock); - - /* Clear Ext interrupts if not being handled already. */ - if (!(zport_a->regs[1] & EXT_INT_ENAB)) - write_zsreg(zport_a, R0, RES_EXT_INT); - - /* A-side DCD tracks RI and SYNC tracks DSR. */ - zport_a->regs[1] |= EXT_INT_ENAB; - zport_a->regs[15] |= DCDIE | SYNCIE; - - /* This-side DCD tracks DCD and CTS tracks CTS. */ - zport->regs[15] |= DCDIE | CTSIE; - - zs_raw_xor_mctrl(zport); - - write_zsreg(zport_a, R1, zport_a->regs[1]); - write_zsreg(zport_a, R15, zport_a->regs[15]); - write_zsreg(zport, R15, zport->regs[15]); - spin_unlock(&scc->zlock); -} - -static void zs_break_ctl(struct uart_port *uport, int break_state) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - unsigned long flags; - - spin_lock_irqsave(&scc->zlock, flags); - if (break_state == -1) - zport->regs[5] |= SND_BRK; - else - zport->regs[5] &= ~SND_BRK; - write_zsreg(zport, R5, zport->regs[5]); - spin_unlock_irqrestore(&scc->zlock, flags); -} - - -/* - * Interrupt handling routines. - */ -#define Rx_BRK 0x0100 /* BREAK event software flag. */ -#define Rx_SYS 0x0200 /* SysRq event software flag. */ - -static void zs_receive_chars(struct zs_port *zport) -{ - struct uart_port *uport = &zport->port; - struct zs_scc *scc = zport->scc; - struct uart_icount *icount; - unsigned int avail, status, ch, flag; - int count; - - for (count = 16; count; count--) { - spin_lock(&scc->zlock); - avail = read_zsreg(zport, R0) & Rx_CH_AV; - spin_unlock(&scc->zlock); - if (!avail) - break; - - spin_lock(&scc->zlock); - status = read_zsreg(zport, R1) & (Rx_OVR | FRM_ERR | PAR_ERR); - ch = read_zsdata(zport); - spin_unlock(&scc->zlock); - - flag = TTY_NORMAL; - - icount = &uport->icount; - icount->rx++; - - /* Handle the null char got when BREAK is removed. */ - if (!ch) - status |= zport->tty_break; - if (unlikely(status & - (Rx_OVR | FRM_ERR | PAR_ERR | Rx_SYS | Rx_BRK))) { - zport->tty_break = 0; - - /* Reset the error indication. */ - if (status & (Rx_OVR | FRM_ERR | PAR_ERR)) { - spin_lock(&scc->zlock); - write_zsreg(zport, R0, ERR_RES); - spin_unlock(&scc->zlock); - } - - if (status & (Rx_SYS | Rx_BRK)) { - icount->brk++; - /* SysRq discards the null char. */ - if (status & Rx_SYS) - continue; - } else if (status & FRM_ERR) - icount->frame++; - else if (status & PAR_ERR) - icount->parity++; - if (status & Rx_OVR) - icount->overrun++; - - status &= uport->read_status_mask; - if (status & Rx_BRK) - flag = TTY_BREAK; - else if (status & FRM_ERR) - flag = TTY_FRAME; - else if (status & PAR_ERR) - flag = TTY_PARITY; - } - - if (uart_handle_sysrq_char(uport, ch)) - continue; - - uart_insert_char(uport, status, Rx_OVR, ch, flag); - } - - tty_flip_buffer_push(uport->state->port.tty); -} - -static void zs_raw_transmit_chars(struct zs_port *zport) -{ - struct circ_buf *xmit = &zport->port.state->xmit; - - /* XON/XOFF chars. */ - if (zport->port.x_char) { - write_zsdata(zport, zport->port.x_char); - zport->port.icount.tx++; - zport->port.x_char = 0; - return; - } - - /* If nothing to do or stopped or hardware stopped. */ - if (uart_circ_empty(xmit) || uart_tx_stopped(&zport->port)) { - zs_raw_stop_tx(zport); - return; - } - - /* Send char. */ - write_zsdata(zport, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - zport->port.icount.tx++; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&zport->port); - - /* Are we are done? */ - if (uart_circ_empty(xmit)) - zs_raw_stop_tx(zport); -} - -static void zs_transmit_chars(struct zs_port *zport) -{ - struct zs_scc *scc = zport->scc; - - spin_lock(&scc->zlock); - zs_raw_transmit_chars(zport); - spin_unlock(&scc->zlock); -} - -static void zs_status_handle(struct zs_port *zport, struct zs_port *zport_a) -{ - struct uart_port *uport = &zport->port; - struct zs_scc *scc = zport->scc; - unsigned int delta; - u8 status, brk; - - spin_lock(&scc->zlock); - - /* Get status from Read Register 0. */ - status = read_zsreg(zport, R0); - - if (zport->regs[15] & BRKIE) { - brk = status & BRK_ABRT; - if (brk && !zport->brk) { - spin_unlock(&scc->zlock); - if (uart_handle_break(uport)) - zport->tty_break = Rx_SYS; - else - zport->tty_break = Rx_BRK; - spin_lock(&scc->zlock); - } - zport->brk = brk; - } - - if (zport != zport_a) { - delta = zs_raw_xor_mctrl(zport); - spin_unlock(&scc->zlock); - - if (delta & TIOCM_CTS) - uart_handle_cts_change(uport, - zport->mctrl & TIOCM_CTS); - if (delta & TIOCM_CAR) - uart_handle_dcd_change(uport, - zport->mctrl & TIOCM_CAR); - if (delta & TIOCM_RNG) - uport->icount.dsr++; - if (delta & TIOCM_DSR) - uport->icount.rng++; - - if (delta) - wake_up_interruptible(&uport->state->port.delta_msr_wait); - - spin_lock(&scc->zlock); - } - - /* Clear the status condition... */ - write_zsreg(zport, R0, RES_EXT_INT); - - spin_unlock(&scc->zlock); -} - -/* - * This is the Z85C30 driver's generic interrupt routine. - */ -static irqreturn_t zs_interrupt(int irq, void *dev_id) -{ - struct zs_scc *scc = dev_id; - struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; - struct zs_port *zport_b = &scc->zport[ZS_CHAN_B]; - irqreturn_t status = IRQ_NONE; - u8 zs_intreg; - int count; - - /* - * NOTE: The read register 3, which holds the irq status, - * does so for both channels on each chip. Although - * the status value itself must be read from the A - * channel and is only valid when read from channel A. - * Yes... broken hardware... - */ - for (count = 16; count; count--) { - spin_lock(&scc->zlock); - zs_intreg = read_zsreg(zport_a, R3); - spin_unlock(&scc->zlock); - if (!zs_intreg) - break; - - /* - * We do not like losing characters, so we prioritise - * interrupt sources a little bit differently than - * the SCC would, was it allowed to. - */ - if (zs_intreg & CHBRxIP) - zs_receive_chars(zport_b); - if (zs_intreg & CHARxIP) - zs_receive_chars(zport_a); - if (zs_intreg & CHBEXT) - zs_status_handle(zport_b, zport_a); - if (zs_intreg & CHAEXT) - zs_status_handle(zport_a, zport_a); - if (zs_intreg & CHBTxIP) - zs_transmit_chars(zport_b); - if (zs_intreg & CHATxIP) - zs_transmit_chars(zport_a); - - status = IRQ_HANDLED; - } - - return status; -} - - -/* - * Finally, routines used to initialize the serial port. - */ -static int zs_startup(struct uart_port *uport) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - unsigned long flags; - int irq_guard; - int ret; - - irq_guard = atomic_add_return(1, &scc->irq_guard); - if (irq_guard == 1) { - ret = request_irq(zport->port.irq, zs_interrupt, - IRQF_SHARED, "scc", scc); - if (ret) { - atomic_add(-1, &scc->irq_guard); - printk(KERN_ERR "zs: can't get irq %d\n", - zport->port.irq); - return ret; - } - } - - spin_lock_irqsave(&scc->zlock, flags); - - /* Clear the receive FIFO. */ - zs_receive_drain(zport); - - /* Clear the interrupt registers. */ - write_zsreg(zport, R0, ERR_RES); - write_zsreg(zport, R0, RES_Tx_P); - /* But Ext only if not being handled already. */ - if (!(zport->regs[1] & EXT_INT_ENAB)) - write_zsreg(zport, R0, RES_EXT_INT); - - /* Finally, enable sequencing and interrupts. */ - zport->regs[1] &= ~RxINT_MASK; - zport->regs[1] |= RxINT_ALL | TxINT_ENAB | EXT_INT_ENAB; - zport->regs[3] |= RxENABLE; - zport->regs[15] |= BRKIE; - write_zsreg(zport, R1, zport->regs[1]); - write_zsreg(zport, R3, zport->regs[3]); - write_zsreg(zport, R5, zport->regs[5]); - write_zsreg(zport, R15, zport->regs[15]); - - /* Record the current state of RR0. */ - zport->mctrl = zs_raw_get_mctrl(zport); - zport->brk = read_zsreg(zport, R0) & BRK_ABRT; - - zport->tx_stopped = 1; - - spin_unlock_irqrestore(&scc->zlock, flags); - - return 0; -} - -static void zs_shutdown(struct uart_port *uport) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - unsigned long flags; - int irq_guard; - - spin_lock_irqsave(&scc->zlock, flags); - - zport->regs[3] &= ~RxENABLE; - write_zsreg(zport, R5, zport->regs[5]); - write_zsreg(zport, R3, zport->regs[3]); - - spin_unlock_irqrestore(&scc->zlock, flags); - - irq_guard = atomic_add_return(-1, &scc->irq_guard); - if (!irq_guard) - free_irq(zport->port.irq, scc); -} - - -static void zs_reset(struct zs_port *zport) -{ - struct zs_scc *scc = zport->scc; - int irq; - unsigned long flags; - - spin_lock_irqsave(&scc->zlock, flags); - irq = !irqs_disabled_flags(flags); - if (!scc->initialised) { - /* Reset the pointer first, just in case... */ - read_zsreg(zport, R0); - /* And let the current transmission finish. */ - zs_line_drain(zport, irq); - write_zsreg(zport, R9, FHWRES); - udelay(10); - write_zsreg(zport, R9, 0); - scc->initialised = 1; - } - load_zsregs(zport, zport->regs, irq); - spin_unlock_irqrestore(&scc->zlock, flags); -} - -static void zs_set_termios(struct uart_port *uport, struct ktermios *termios, - struct ktermios *old_termios) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; - int irq; - unsigned int baud, brg; - unsigned long flags; - - spin_lock_irqsave(&scc->zlock, flags); - irq = !irqs_disabled_flags(flags); - - /* Byte size. */ - zport->regs[3] &= ~RxNBITS_MASK; - zport->regs[5] &= ~TxNBITS_MASK; - switch (termios->c_cflag & CSIZE) { - case CS5: - zport->regs[3] |= Rx5; - zport->regs[5] |= Tx5; - break; - case CS6: - zport->regs[3] |= Rx6; - zport->regs[5] |= Tx6; - break; - case CS7: - zport->regs[3] |= Rx7; - zport->regs[5] |= Tx7; - break; - case CS8: - default: - zport->regs[3] |= Rx8; - zport->regs[5] |= Tx8; - break; - } - - /* Parity and stop bits. */ - zport->regs[4] &= ~(XCLK_MASK | SB_MASK | PAR_ENA | PAR_EVEN); - if (termios->c_cflag & CSTOPB) - zport->regs[4] |= SB2; - else - zport->regs[4] |= SB1; - if (termios->c_cflag & PARENB) - zport->regs[4] |= PAR_ENA; - if (!(termios->c_cflag & PARODD)) - zport->regs[4] |= PAR_EVEN; - switch (zport->clk_mode) { - case 64: - zport->regs[4] |= X64CLK; - break; - case 32: - zport->regs[4] |= X32CLK; - break; - case 16: - zport->regs[4] |= X16CLK; - break; - case 1: - zport->regs[4] |= X1CLK; - break; - default: - BUG(); - } - - baud = uart_get_baud_rate(uport, termios, old_termios, 0, - uport->uartclk / zport->clk_mode / 4); - - brg = ZS_BPS_TO_BRG(baud, uport->uartclk / zport->clk_mode); - zport->regs[12] = brg & 0xff; - zport->regs[13] = (brg >> 8) & 0xff; - - uart_update_timeout(uport, termios->c_cflag, baud); - - uport->read_status_mask = Rx_OVR; - if (termios->c_iflag & INPCK) - uport->read_status_mask |= FRM_ERR | PAR_ERR; - if (termios->c_iflag & (BRKINT | PARMRK)) - uport->read_status_mask |= Rx_BRK; - - uport->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - uport->ignore_status_mask |= FRM_ERR | PAR_ERR; - if (termios->c_iflag & IGNBRK) { - uport->ignore_status_mask |= Rx_BRK; - if (termios->c_iflag & IGNPAR) - uport->ignore_status_mask |= Rx_OVR; - } - - if (termios->c_cflag & CREAD) - zport->regs[3] |= RxENABLE; - else - zport->regs[3] &= ~RxENABLE; - - if (zport != zport_a) { - if (!(termios->c_cflag & CLOCAL)) { - zport->regs[15] |= DCDIE; - } else - zport->regs[15] &= ~DCDIE; - if (termios->c_cflag & CRTSCTS) { - zport->regs[15] |= CTSIE; - } else - zport->regs[15] &= ~CTSIE; - zs_raw_xor_mctrl(zport); - } - - /* Load up the new values. */ - load_zsregs(zport, zport->regs, irq); - - spin_unlock_irqrestore(&scc->zlock, flags); -} - -/* - * Hack alert! - * Required solely so that the initial PROM-based console - * works undisturbed in parallel with this one. - */ -static void zs_pm(struct uart_port *uport, unsigned int state, - unsigned int oldstate) -{ - struct zs_port *zport = to_zport(uport); - - if (state < 3) - zport->regs[5] |= TxENAB; - else - zport->regs[5] &= ~TxENAB; - write_zsreg(zport, R5, zport->regs[5]); -} - - -static const char *zs_type(struct uart_port *uport) -{ - return "Z85C30 SCC"; -} - -static void zs_release_port(struct uart_port *uport) -{ - iounmap(uport->membase); - uport->membase = 0; - release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE); -} - -static int zs_map_port(struct uart_port *uport) -{ - if (!uport->membase) - uport->membase = ioremap_nocache(uport->mapbase, - ZS_CHAN_IO_SIZE); - if (!uport->membase) { - printk(KERN_ERR "zs: Cannot map MMIO\n"); - return -ENOMEM; - } - return 0; -} - -static int zs_request_port(struct uart_port *uport) -{ - int ret; - - if (!request_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE, "scc")) { - printk(KERN_ERR "zs: Unable to reserve MMIO resource\n"); - return -EBUSY; - } - ret = zs_map_port(uport); - if (ret) { - release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE); - return ret; - } - return 0; -} - -static void zs_config_port(struct uart_port *uport, int flags) -{ - struct zs_port *zport = to_zport(uport); - - if (flags & UART_CONFIG_TYPE) { - if (zs_request_port(uport)) - return; - - uport->type = PORT_ZS; - - zs_reset(zport); - } -} - -static int zs_verify_port(struct uart_port *uport, struct serial_struct *ser) -{ - struct zs_port *zport = to_zport(uport); - int ret = 0; - - if (ser->type != PORT_UNKNOWN && ser->type != PORT_ZS) - ret = -EINVAL; - if (ser->irq != uport->irq) - ret = -EINVAL; - if (ser->baud_base != uport->uartclk / zport->clk_mode / 4) - ret = -EINVAL; - return ret; -} - - -static struct uart_ops zs_ops = { - .tx_empty = zs_tx_empty, - .set_mctrl = zs_set_mctrl, - .get_mctrl = zs_get_mctrl, - .stop_tx = zs_stop_tx, - .start_tx = zs_start_tx, - .stop_rx = zs_stop_rx, - .enable_ms = zs_enable_ms, - .break_ctl = zs_break_ctl, - .startup = zs_startup, - .shutdown = zs_shutdown, - .set_termios = zs_set_termios, - .pm = zs_pm, - .type = zs_type, - .release_port = zs_release_port, - .request_port = zs_request_port, - .config_port = zs_config_port, - .verify_port = zs_verify_port, -}; - -/* - * Initialize Z85C30 port structures. - */ -static int __init zs_probe_sccs(void) -{ - static int probed; - struct zs_parms zs_parms; - int chip, side, irq; - int n_chips = 0; - int i; - - if (probed) - return 0; - - irq = dec_interrupt[DEC_IRQ_SCC0]; - if (irq >= 0) { - zs_parms.scc[n_chips] = IOASIC_SCC0; - zs_parms.irq[n_chips] = dec_interrupt[DEC_IRQ_SCC0]; - n_chips++; - } - irq = dec_interrupt[DEC_IRQ_SCC1]; - if (irq >= 0) { - zs_parms.scc[n_chips] = IOASIC_SCC1; - zs_parms.irq[n_chips] = dec_interrupt[DEC_IRQ_SCC1]; - n_chips++; - } - if (!n_chips) - return -ENXIO; - - probed = 1; - - for (chip = 0; chip < n_chips; chip++) { - spin_lock_init(&zs_sccs[chip].zlock); - for (side = 0; side < ZS_NUM_CHAN; side++) { - struct zs_port *zport = &zs_sccs[chip].zport[side]; - struct uart_port *uport = &zport->port; - - zport->scc = &zs_sccs[chip]; - zport->clk_mode = 16; - - uport->irq = zs_parms.irq[chip]; - uport->uartclk = ZS_CLOCK; - uport->fifosize = 1; - uport->iotype = UPIO_MEM; - uport->flags = UPF_BOOT_AUTOCONF; - uport->ops = &zs_ops; - uport->line = chip * ZS_NUM_CHAN + side; - uport->mapbase = dec_kn_slot_base + - zs_parms.scc[chip] + - (side ^ ZS_CHAN_B) * ZS_CHAN_IO_SIZE; - - for (i = 0; i < ZS_NUM_REGS; i++) - zport->regs[i] = zs_init_regs[i]; - } - } - - return 0; -} - - -#ifdef CONFIG_SERIAL_ZS_CONSOLE -static void zs_console_putchar(struct uart_port *uport, int ch) -{ - struct zs_port *zport = to_zport(uport); - struct zs_scc *scc = zport->scc; - int irq; - unsigned long flags; - - spin_lock_irqsave(&scc->zlock, flags); - irq = !irqs_disabled_flags(flags); - if (zs_transmit_drain(zport, irq)) - write_zsdata(zport, ch); - spin_unlock_irqrestore(&scc->zlock, flags); -} - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - */ -static void zs_console_write(struct console *co, const char *s, - unsigned int count) -{ - int chip = co->index / ZS_NUM_CHAN, side = co->index % ZS_NUM_CHAN; - struct zs_port *zport = &zs_sccs[chip].zport[side]; - struct zs_scc *scc = zport->scc; - unsigned long flags; - u8 txint, txenb; - int irq; - - /* Disable transmit interrupts and enable the transmitter. */ - spin_lock_irqsave(&scc->zlock, flags); - txint = zport->regs[1]; - txenb = zport->regs[5]; - if (txint & TxINT_ENAB) { - zport->regs[1] = txint & ~TxINT_ENAB; - write_zsreg(zport, R1, zport->regs[1]); - } - if (!(txenb & TxENAB)) { - zport->regs[5] = txenb | TxENAB; - write_zsreg(zport, R5, zport->regs[5]); - } - spin_unlock_irqrestore(&scc->zlock, flags); - - uart_console_write(&zport->port, s, count, zs_console_putchar); - - /* Restore transmit interrupts and the transmitter enable. */ - spin_lock_irqsave(&scc->zlock, flags); - irq = !irqs_disabled_flags(flags); - zs_line_drain(zport, irq); - if (!(txenb & TxENAB)) { - zport->regs[5] &= ~TxENAB; - write_zsreg(zport, R5, zport->regs[5]); - } - if (txint & TxINT_ENAB) { - zport->regs[1] |= TxINT_ENAB; - write_zsreg(zport, R1, zport->regs[1]); - } - spin_unlock_irqrestore(&scc->zlock, flags); -} - -/* - * Setup serial console baud/bits/parity. We do two things here: - * - construct a cflag setting for the first uart_open() - * - initialise the serial port - * Return non-zero if we didn't find a serial port. - */ -static int __init zs_console_setup(struct console *co, char *options) -{ - int chip = co->index / ZS_NUM_CHAN, side = co->index % ZS_NUM_CHAN; - struct zs_port *zport = &zs_sccs[chip].zport[side]; - struct uart_port *uport = &zport->port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - int ret; - - ret = zs_map_port(uport); - if (ret) - return ret; - - zs_reset(zport); - zs_pm(uport, 0, -1); - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - return uart_set_options(uport, co, baud, parity, bits, flow); -} - -static struct uart_driver zs_reg; -static struct console zs_console = { - .name = "ttyS", - .write = zs_console_write, - .device = uart_console_device, - .setup = zs_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &zs_reg, -}; - -/* - * Register console. - */ -static int __init zs_serial_console_init(void) -{ - int ret; - - ret = zs_probe_sccs(); - if (ret) - return ret; - register_console(&zs_console); - - return 0; -} - -console_initcall(zs_serial_console_init); - -#define SERIAL_ZS_CONSOLE &zs_console -#else -#define SERIAL_ZS_CONSOLE NULL -#endif /* CONFIG_SERIAL_ZS_CONSOLE */ - -static struct uart_driver zs_reg = { - .owner = THIS_MODULE, - .driver_name = "serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = ZS_NUM_SCCS * ZS_NUM_CHAN, - .cons = SERIAL_ZS_CONSOLE, -}; - -/* zs_init inits the driver. */ -static int __init zs_init(void) -{ - int i, ret; - - pr_info("%s%s\n", zs_name, zs_version); - - /* Find out how many Z85C30 SCCs we have. */ - ret = zs_probe_sccs(); - if (ret) - return ret; - - ret = uart_register_driver(&zs_reg); - if (ret) - return ret; - - for (i = 0; i < ZS_NUM_SCCS * ZS_NUM_CHAN; i++) { - struct zs_scc *scc = &zs_sccs[i / ZS_NUM_CHAN]; - struct zs_port *zport = &scc->zport[i % ZS_NUM_CHAN]; - struct uart_port *uport = &zport->port; - - if (zport->scc) - uart_add_one_port(&zs_reg, uport); - } - - return 0; -} - -static void __exit zs_exit(void) -{ - int i; - - for (i = ZS_NUM_SCCS * ZS_NUM_CHAN - 1; i >= 0; i--) { - struct zs_scc *scc = &zs_sccs[i / ZS_NUM_CHAN]; - struct zs_port *zport = &scc->zport[i % ZS_NUM_CHAN]; - struct uart_port *uport = &zport->port; - - if (zport->scc) - uart_remove_one_port(&zs_reg, uport); - } - - uart_unregister_driver(&zs_reg); -} - -module_init(zs_init); -module_exit(zs_exit); diff --git a/drivers/serial/zs.h b/drivers/serial/zs.h deleted file mode 100644 index aa921b57d827..000000000000 --- a/drivers/serial/zs.h +++ /dev/null @@ -1,284 +0,0 @@ -/* - * zs.h: Definitions for the DECstation Z85C30 serial driver. - * - * Adapted from drivers/sbus/char/sunserial.h by Paul Mackerras. - * Adapted from drivers/macintosh/macserial.h by Harald Koerfgen. - * - * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 2004, 2005, 2007 Maciej W. Rozycki - */ -#ifndef _SERIAL_ZS_H -#define _SERIAL_ZS_H - -#ifdef __KERNEL__ - -#define ZS_NUM_REGS 16 - -/* - * This is our internal structure for each serial port's state. - */ -struct zs_port { - struct zs_scc *scc; /* Containing SCC. */ - struct uart_port port; /* Underlying UART. */ - - int clk_mode; /* May be 1, 16, 32, or 64. */ - - unsigned int tty_break; /* Set on BREAK condition. */ - int tx_stopped; /* Output is suspended. */ - - unsigned int mctrl; /* State of modem lines. */ - u8 brk; /* BREAK state from RR0. */ - - u8 regs[ZS_NUM_REGS]; /* Channel write registers. */ -}; - -/* - * Per-SCC state for locking and the interrupt handler. - */ -struct zs_scc { - struct zs_port zport[2]; - spinlock_t zlock; - atomic_t irq_guard; - int initialised; -}; - -#endif /* __KERNEL__ */ - -/* - * Conversion routines to/from brg time constants from/to bits per second. - */ -#define ZS_BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) -#define ZS_BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) - -/* - * The Zilog register set. - */ - -/* Write Register 0 (Command) */ -#define R0 0 /* Register selects */ -#define R1 1 -#define R2 2 -#define R3 3 -#define R4 4 -#define R5 5 -#define R6 6 -#define R7 7 -#define R8 8 -#define R9 9 -#define R10 10 -#define R11 11 -#define R12 12 -#define R13 13 -#define R14 14 -#define R15 15 - -#define NULLCODE 0 /* Null Code */ -#define POINT_HIGH 0x8 /* Select upper half of registers */ -#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ -#define SEND_ABORT 0x18 /* HDLC Abort */ -#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ -#define RES_Tx_P 0x28 /* Reset TxINT Pending */ -#define ERR_RES 0x30 /* Error Reset */ -#define RES_H_IUS 0x38 /* Reset highest IUS */ - -#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ -#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ -#define RES_EOM_L 0xC0 /* Reset EOM latch */ - -/* Write Register 1 (Tx/Rx/Ext Int Enable and WAIT/DMA Commands) */ -#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ -#define TxINT_ENAB 0x2 /* Tx Int Enable */ -#define PAR_SPEC 0x4 /* Parity is special condition */ - -#define RxINT_DISAB 0 /* Rx Int Disable */ -#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ -#define RxINT_ALL 0x10 /* Int on all Rx Characters or error */ -#define RxINT_ERR 0x18 /* Int on error only */ -#define RxINT_MASK 0x18 - -#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ -#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ -#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ - -/* Write Register 2 (Interrupt Vector) */ - -/* Write Register 3 (Receive Parameters and Control) */ -#define RxENABLE 0x1 /* Rx Enable */ -#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ -#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ -#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ -#define ENT_HM 0x10 /* Enter Hunt Mode */ -#define AUTO_ENAB 0x20 /* Auto Enables */ -#define Rx5 0x0 /* Rx 5 Bits/Character */ -#define Rx7 0x40 /* Rx 7 Bits/Character */ -#define Rx6 0x80 /* Rx 6 Bits/Character */ -#define Rx8 0xc0 /* Rx 8 Bits/Character */ -#define RxNBITS_MASK 0xc0 - -/* Write Register 4 (Transmit/Receive Miscellaneous Parameters and Modes) */ -#define PAR_ENA 0x1 /* Parity Enable */ -#define PAR_EVEN 0x2 /* Parity Even/Odd* */ - -#define SYNC_ENAB 0 /* Sync Modes Enable */ -#define SB1 0x4 /* 1 stop bit/char */ -#define SB15 0x8 /* 1.5 stop bits/char */ -#define SB2 0xc /* 2 stop bits/char */ -#define SB_MASK 0xc - -#define MONSYNC 0 /* 8 Bit Sync character */ -#define BISYNC 0x10 /* 16 bit sync character */ -#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ -#define EXTSYNC 0x30 /* External Sync Mode */ - -#define X1CLK 0x0 /* x1 clock mode */ -#define X16CLK 0x40 /* x16 clock mode */ -#define X32CLK 0x80 /* x32 clock mode */ -#define X64CLK 0xc0 /* x64 clock mode */ -#define XCLK_MASK 0xc0 - -/* Write Register 5 (Transmit Parameters and Controls) */ -#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ -#define RTS 0x2 /* RTS */ -#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ -#define TxENAB 0x8 /* Tx Enable */ -#define SND_BRK 0x10 /* Send Break */ -#define Tx5 0x0 /* Tx 5 bits (or less)/character */ -#define Tx7 0x20 /* Tx 7 bits/character */ -#define Tx6 0x40 /* Tx 6 bits/character */ -#define Tx8 0x60 /* Tx 8 bits/character */ -#define TxNBITS_MASK 0x60 -#define DTR 0x80 /* DTR */ - -/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ - -/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ - -/* Write Register 8 (Transmit Buffer) */ - -/* Write Register 9 (Master Interrupt Control) */ -#define VIS 1 /* Vector Includes Status */ -#define NV 2 /* No Vector */ -#define DLC 4 /* Disable Lower Chain */ -#define MIE 8 /* Master Interrupt Enable */ -#define STATHI 0x10 /* Status high */ -#define SOFTACK 0x20 /* Software Interrupt Acknowledge */ -#define NORESET 0 /* No reset on write to R9 */ -#define CHRB 0x40 /* Reset channel B */ -#define CHRA 0x80 /* Reset channel A */ -#define FHWRES 0xc0 /* Force hardware reset */ - -/* Write Register 10 (Miscellaneous Transmitter/Receiver Control Bits) */ -#define BIT6 1 /* 6 bit/8bit sync */ -#define LOOPMODE 2 /* SDLC Loop mode */ -#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ -#define MARKIDLE 8 /* Mark/flag on idle */ -#define GAOP 0x10 /* Go active on poll */ -#define NRZ 0 /* NRZ mode */ -#define NRZI 0x20 /* NRZI mode */ -#define FM1 0x40 /* FM1 (transition = 1) */ -#define FM0 0x60 /* FM0 (transition = 0) */ -#define CRCPS 0x80 /* CRC Preset I/O */ - -/* Write Register 11 (Clock Mode Control) */ -#define TRxCXT 0 /* TRxC = Xtal output */ -#define TRxCTC 1 /* TRxC = Transmit clock */ -#define TRxCBR 2 /* TRxC = BR Generator Output */ -#define TRxCDP 3 /* TRxC = DPLL output */ -#define TRxCOI 4 /* TRxC O/I */ -#define TCRTxCP 0 /* Transmit clock = RTxC pin */ -#define TCTRxCP 8 /* Transmit clock = TRxC pin */ -#define TCBR 0x10 /* Transmit clock = BR Generator output */ -#define TCDPLL 0x18 /* Transmit clock = DPLL output */ -#define RCRTxCP 0 /* Receive clock = RTxC pin */ -#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ -#define RCBR 0x40 /* Receive clock = BR Generator output */ -#define RCDPLL 0x60 /* Receive clock = DPLL output */ -#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ - -/* Write Register 12 (Lower Byte of Baud Rate Generator Time Constant) */ - -/* Write Register 13 (Upper Byte of Baud Rate Generator Time Constant) */ - -/* Write Register 14 (Miscellaneous Control Bits) */ -#define BRENABL 1 /* Baud rate generator enable */ -#define BRSRC 2 /* Baud rate generator source */ -#define DTRREQ 4 /* DTR/Request function */ -#define AUTOECHO 8 /* Auto Echo */ -#define LOOPBAK 0x10 /* Local loopback */ -#define SEARCH 0x20 /* Enter search mode */ -#define RMC 0x40 /* Reset missing clock */ -#define DISDPLL 0x60 /* Disable DPLL */ -#define SSBR 0x80 /* Set DPLL source = BR generator */ -#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ -#define SFMM 0xc0 /* Set FM mode */ -#define SNRZI 0xe0 /* Set NRZI mode */ - -/* Write Register 15 (External/Status Interrupt Control) */ -#define WR7P_EN 1 /* WR7 Prime SDLC Feature Enable */ -#define ZCIE 2 /* Zero count IE */ -#define DCDIE 8 /* DCD IE */ -#define SYNCIE 0x10 /* Sync/hunt IE */ -#define CTSIE 0x20 /* CTS IE */ -#define TxUIE 0x40 /* Tx Underrun/EOM IE */ -#define BRKIE 0x80 /* Break/Abort IE */ - - -/* Read Register 0 (Transmit/Receive Buffer Status and External Status) */ -#define Rx_CH_AV 0x1 /* Rx Character Available */ -#define ZCOUNT 0x2 /* Zero count */ -#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ -#define DCD 0x8 /* DCD */ -#define SYNC_HUNT 0x10 /* Sync/hunt */ -#define CTS 0x20 /* CTS */ -#define TxEOM 0x40 /* Tx underrun */ -#define BRK_ABRT 0x80 /* Break/Abort */ - -/* Read Register 1 (Special Receive Condition Status) */ -#define ALL_SNT 0x1 /* All sent */ -/* Residue Data for 8 Rx bits/char programmed */ -#define RES3 0x8 /* 0/3 */ -#define RES4 0x4 /* 0/4 */ -#define RES5 0xc /* 0/5 */ -#define RES6 0x2 /* 0/6 */ -#define RES7 0xa /* 0/7 */ -#define RES8 0x6 /* 0/8 */ -#define RES18 0xe /* 1/8 */ -#define RES28 0x0 /* 2/8 */ -/* Special Rx Condition Interrupts */ -#define PAR_ERR 0x10 /* Parity Error */ -#define Rx_OVR 0x20 /* Rx Overrun Error */ -#define FRM_ERR 0x40 /* CRC/Framing Error */ -#define END_FR 0x80 /* End of Frame (SDLC) */ - -/* Read Register 2 (Interrupt Vector (WR2) -- channel A). */ - -/* Read Register 2 (Modified Interrupt Vector -- channel B). */ - -/* Read Register 3 (Interrupt Pending Bits -- channel A only). */ -#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ -#define CHBTxIP 0x2 /* Channel B Tx IP */ -#define CHBRxIP 0x4 /* Channel B Rx IP */ -#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ -#define CHATxIP 0x10 /* Channel A Tx IP */ -#define CHARxIP 0x20 /* Channel A Rx IP */ - -/* Read Register 6 (SDLC FIFO Status and Byte Count LSB) */ - -/* Read Register 7 (SDLC FIFO Status and Byte Count MSB) */ - -/* Read Register 8 (Receive Data) */ - -/* Read Register 10 (Miscellaneous Status Bits) */ -#define ONLOOP 2 /* On loop */ -#define LOOPSEND 0x10 /* Loop sending */ -#define CLK2MIS 0x40 /* Two clocks missing */ -#define CLK1MIS 0x80 /* One clock missing */ - -/* Read Register 12 (Lower Byte of Baud Rate Generator Constant (WR12)) */ - -/* Read Register 13 (Upper Byte of Baud Rate Generator Constant (WR13) */ - -/* Read Register 15 (External/Status Interrupt Control (WR15)) */ - -#endif /* _SERIAL_ZS_H */ diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index d3685f071b8d..396277216e4f 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_R3964) += n_r3964.o obj-y += vt/ obj-$(CONFIG_HVC_DRIVER) += hvc/ +obj-y += serial/ diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c new file mode 100644 index 000000000000..d89aa38c5cf0 --- /dev/null +++ b/drivers/tty/serial/21285.c @@ -0,0 +1,513 @@ +/* + * linux/drivers/serial/21285.c + * + * Driver for the serial port on the 21285 StrongArm-110 core logic chip. + * + * Based on drivers/char/serial.c + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define BAUD_BASE (mem_fclk_21285/64) + +#define SERIAL_21285_NAME "ttyFB" +#define SERIAL_21285_MAJOR 204 +#define SERIAL_21285_MINOR 4 + +#define RXSTAT_DUMMY_READ 0x80000000 +#define RXSTAT_FRAME (1 << 0) +#define RXSTAT_PARITY (1 << 1) +#define RXSTAT_OVERRUN (1 << 2) +#define RXSTAT_ANYERR (RXSTAT_FRAME|RXSTAT_PARITY|RXSTAT_OVERRUN) + +#define H_UBRLCR_BREAK (1 << 0) +#define H_UBRLCR_PARENB (1 << 1) +#define H_UBRLCR_PAREVN (1 << 2) +#define H_UBRLCR_STOPB (1 << 3) +#define H_UBRLCR_FIFO (1 << 4) + +static const char serial21285_name[] = "Footbridge UART"; + +#define tx_enabled(port) ((port)->unused[0]) +#define rx_enabled(port) ((port)->unused[1]) + +/* + * The documented expression for selecting the divisor is: + * BAUD_BASE / baud - 1 + * However, typically BAUD_BASE is not divisible by baud, so + * we want to select the divisor that gives us the minimum + * error. Therefore, we want: + * int(BAUD_BASE / baud - 0.5) -> + * int(BAUD_BASE / baud - (baud >> 1) / baud) -> + * int((BAUD_BASE - (baud >> 1)) / baud) + */ + +static void serial21285_stop_tx(struct uart_port *port) +{ + if (tx_enabled(port)) { + disable_irq_nosync(IRQ_CONTX); + tx_enabled(port) = 0; + } +} + +static void serial21285_start_tx(struct uart_port *port) +{ + if (!tx_enabled(port)) { + enable_irq(IRQ_CONTX); + tx_enabled(port) = 1; + } +} + +static void serial21285_stop_rx(struct uart_port *port) +{ + if (rx_enabled(port)) { + disable_irq_nosync(IRQ_CONRX); + rx_enabled(port) = 0; + } +} + +static void serial21285_enable_ms(struct uart_port *port) +{ +} + +static irqreturn_t serial21285_rx_chars(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct tty_struct *tty = port->state->port.tty; + unsigned int status, ch, flag, rxs, max_count = 256; + + status = *CSR_UARTFLG; + while (!(status & 0x10) && max_count--) { + ch = *CSR_UARTDR; + flag = TTY_NORMAL; + port->icount.rx++; + + rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ; + if (unlikely(rxs & RXSTAT_ANYERR)) { + if (rxs & RXSTAT_PARITY) + port->icount.parity++; + else if (rxs & RXSTAT_FRAME) + port->icount.frame++; + if (rxs & RXSTAT_OVERRUN) + port->icount.overrun++; + + rxs &= port->read_status_mask; + + if (rxs & RXSTAT_PARITY) + flag = TTY_PARITY; + else if (rxs & RXSTAT_FRAME) + flag = TTY_FRAME; + } + + uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag); + + status = *CSR_UARTFLG; + } + tty_flip_buffer_push(tty); + + return IRQ_HANDLED; +} + +static irqreturn_t serial21285_tx_chars(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct circ_buf *xmit = &port->state->xmit; + int count = 256; + + if (port->x_char) { + *CSR_UARTDR = port->x_char; + port->icount.tx++; + port->x_char = 0; + goto out; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + serial21285_stop_tx(port); + goto out; + } + + do { + *CSR_UARTDR = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0 && !(*CSR_UARTFLG & 0x20)); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + serial21285_stop_tx(port); + + out: + return IRQ_HANDLED; +} + +static unsigned int serial21285_tx_empty(struct uart_port *port) +{ + return (*CSR_UARTFLG & 8) ? 0 : TIOCSER_TEMT; +} + +/* no modem control lines */ +static unsigned int serial21285_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +static void serial21285_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static void serial21285_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + unsigned int h_lcr; + + spin_lock_irqsave(&port->lock, flags); + h_lcr = *CSR_H_UBRLCR; + if (break_state) + h_lcr |= H_UBRLCR_BREAK; + else + h_lcr &= ~H_UBRLCR_BREAK; + *CSR_H_UBRLCR = h_lcr; + spin_unlock_irqrestore(&port->lock, flags); +} + +static int serial21285_startup(struct uart_port *port) +{ + int ret; + + tx_enabled(port) = 1; + rx_enabled(port) = 1; + + ret = request_irq(IRQ_CONRX, serial21285_rx_chars, 0, + serial21285_name, port); + if (ret == 0) { + ret = request_irq(IRQ_CONTX, serial21285_tx_chars, 0, + serial21285_name, port); + if (ret) + free_irq(IRQ_CONRX, port); + } + + return ret; +} + +static void serial21285_shutdown(struct uart_port *port) +{ + free_irq(IRQ_CONTX, port); + free_irq(IRQ_CONRX, port); +} + +static void +serial21285_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, quot, h_lcr, b; + + /* + * We don't support modem control lines. + */ + termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR); + termios->c_cflag |= CLOCAL; + + /* + * We don't support BREAK character recognition. + */ + termios->c_iflag &= ~(IGNBRK | BRKINT); + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + b = port->uartclk / (16 * quot); + tty_termios_encode_baud_rate(termios, b, b); + + switch (termios->c_cflag & CSIZE) { + case CS5: + h_lcr = 0x00; + break; + case CS6: + h_lcr = 0x20; + break; + case CS7: + h_lcr = 0x40; + break; + default: /* CS8 */ + h_lcr = 0x60; + break; + } + + if (termios->c_cflag & CSTOPB) + h_lcr |= H_UBRLCR_STOPB; + if (termios->c_cflag & PARENB) { + h_lcr |= H_UBRLCR_PARENB; + if (!(termios->c_cflag & PARODD)) + h_lcr |= H_UBRLCR_PAREVN; + } + + if (port->fifosize) + h_lcr |= H_UBRLCR_FIFO; + + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * Which character status flags are we interested in? + */ + port->read_status_mask = RXSTAT_OVERRUN; + if (termios->c_iflag & INPCK) + port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; + + /* + * Which character status flags should we ignore? + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; + if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) + port->ignore_status_mask |= RXSTAT_OVERRUN; + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= RXSTAT_DUMMY_READ; + + quot -= 1; + + *CSR_UARTCON = 0; + *CSR_L_UBRLCR = quot & 0xff; + *CSR_M_UBRLCR = (quot >> 8) & 0x0f; + *CSR_H_UBRLCR = h_lcr; + *CSR_UARTCON = 1; + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *serial21285_type(struct uart_port *port) +{ + return port->type == PORT_21285 ? "DC21285" : NULL; +} + +static void serial21285_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, 32); +} + +static int serial21285_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, 32, serial21285_name) + != NULL ? 0 : -EBUSY; +} + +static void serial21285_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE && serial21285_request_port(port) == 0) + port->type = PORT_21285; +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int serial21285_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_21285) + ret = -EINVAL; + if (ser->irq != NO_IRQ) + ret = -EINVAL; + if (ser->baud_base != port->uartclk / 16) + ret = -EINVAL; + return ret; +} + +static struct uart_ops serial21285_ops = { + .tx_empty = serial21285_tx_empty, + .get_mctrl = serial21285_get_mctrl, + .set_mctrl = serial21285_set_mctrl, + .stop_tx = serial21285_stop_tx, + .start_tx = serial21285_start_tx, + .stop_rx = serial21285_stop_rx, + .enable_ms = serial21285_enable_ms, + .break_ctl = serial21285_break_ctl, + .startup = serial21285_startup, + .shutdown = serial21285_shutdown, + .set_termios = serial21285_set_termios, + .type = serial21285_type, + .release_port = serial21285_release_port, + .request_port = serial21285_request_port, + .config_port = serial21285_config_port, + .verify_port = serial21285_verify_port, +}; + +static struct uart_port serial21285_port = { + .mapbase = 0x42000160, + .iotype = UPIO_MEM, + .irq = NO_IRQ, + .fifosize = 16, + .ops = &serial21285_ops, + .flags = UPF_BOOT_AUTOCONF, +}; + +static void serial21285_setup_ports(void) +{ + serial21285_port.uartclk = mem_fclk_21285 / 4; +} + +#ifdef CONFIG_SERIAL_21285_CONSOLE +static void serial21285_console_putchar(struct uart_port *port, int ch) +{ + while (*CSR_UARTFLG & 0x20) + barrier(); + *CSR_UARTDR = ch; +} + +static void +serial21285_console_write(struct console *co, const char *s, + unsigned int count) +{ + uart_console_write(&serial21285_port, s, count, serial21285_console_putchar); +} + +static void __init +serial21285_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + if (*CSR_UARTCON == 1) { + unsigned int tmp; + + tmp = *CSR_H_UBRLCR; + switch (tmp & 0x60) { + case 0x00: + *bits = 5; + break; + case 0x20: + *bits = 6; + break; + case 0x40: + *bits = 7; + break; + default: + case 0x60: + *bits = 8; + break; + } + + if (tmp & H_UBRLCR_PARENB) { + *parity = 'o'; + if (tmp & H_UBRLCR_PAREVN) + *parity = 'e'; + } + + tmp = *CSR_L_UBRLCR | (*CSR_M_UBRLCR << 8); + + *baud = port->uartclk / (16 * (tmp + 1)); + } +} + +static int __init serial21285_console_setup(struct console *co, char *options) +{ + struct uart_port *port = &serial21285_port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (machine_is_personal_server()) + baud = 57600; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + serial21285_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver serial21285_reg; + +static struct console serial21285_console = +{ + .name = SERIAL_21285_NAME, + .write = serial21285_console_write, + .device = uart_console_device, + .setup = serial21285_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial21285_reg, +}; + +static int __init rs285_console_init(void) +{ + serial21285_setup_ports(); + register_console(&serial21285_console); + return 0; +} +console_initcall(rs285_console_init); + +#define SERIAL_21285_CONSOLE &serial21285_console +#else +#define SERIAL_21285_CONSOLE NULL +#endif + +static struct uart_driver serial21285_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyFB", + .dev_name = "ttyFB", + .major = SERIAL_21285_MAJOR, + .minor = SERIAL_21285_MINOR, + .nr = 1, + .cons = SERIAL_21285_CONSOLE, +}; + +static int __init serial21285_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: 21285 driver\n"); + + serial21285_setup_ports(); + + ret = uart_register_driver(&serial21285_reg); + if (ret == 0) + uart_add_one_port(&serial21285_reg, &serial21285_port); + + return ret; +} + +static void __exit serial21285_exit(void) +{ + uart_remove_one_port(&serial21285_reg, &serial21285_port); + uart_unregister_driver(&serial21285_reg); +} + +module_init(serial21285_init); +module_exit(serial21285_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver"); +MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR); diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c new file mode 100644 index 000000000000..be0ebce36e54 --- /dev/null +++ b/drivers/tty/serial/68328serial.c @@ -0,0 +1,1472 @@ +/* 68328serial.c: Serial port driver for 68328 microcontroller + * + * Copyright (C) 1995 David S. Miller + * Copyright (C) 1998 Kenneth Albanowski + * Copyright (C) 1998, 1999 D. Jeff Dionne + * Copyright (C) 1999 Vladimir Gurevich + * Copyright (C) 2002-2003 David McCullough + * Copyright (C) 2002 Greg Ungerer + * + * VZ Support/Fixes Evan Stawnyczy + * Multiple UART support Daniel Potts + * Power management support Daniel Potts + * VZ Second Serial Port enable Phil Wilshire + * 2.4/2.5 port David McCullough + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* (es) */ +/* note: perhaps we can murge these files, so that you can just + * define 1 of them, and they can sort that out for themselves + */ +#if defined(CONFIG_M68EZ328) +#include +#else +#if defined(CONFIG_M68VZ328) +#include +#else +#include +#endif /* CONFIG_M68VZ328 */ +#endif /* CONFIG_M68EZ328 */ + +#include "68328serial.h" + +/* Turn off usage of real serial interrupt code, to "support" Copilot */ +#ifdef CONFIG_XCOPILOT_BUGS +#undef USE_INTS +#else +#define USE_INTS +#endif + +static struct m68k_serial m68k_soft[NR_PORTS]; + +static unsigned int uart_irqs[NR_PORTS] = UART_IRQ_DEFNS; + +/* multiple ports are contiguous in memory */ +m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR; + +struct tty_struct m68k_ttys; +struct m68k_serial *m68k_consinfo = 0; + +#define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */ + +struct tty_driver *serial_driver; + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +/* Debugging... DEBUG_INTR is bad to use when one of the zs + * lines is your console ;( + */ +#undef SERIAL_DEBUG_INTR +#undef SERIAL_DEBUG_OPEN +#undef SERIAL_DEBUG_FLOW + +#define RS_ISR_PASS_LIMIT 256 + +static void change_speed(struct m68k_serial *info); + +/* + * Setup for console. Argument comes from the boot command line. + */ + +/* note: this is messy, but it works, again, perhaps defined somewhere else?*/ +#ifdef CONFIG_M68VZ328 +#define CONSOLE_BAUD_RATE 19200 +#define DEFAULT_CBAUD B19200 +#endif + + +#ifndef CONSOLE_BAUD_RATE +#define CONSOLE_BAUD_RATE 9600 +#define DEFAULT_CBAUD B9600 +#endif + + +static int m68328_console_initted = 0; +static int m68328_console_baud = CONSOLE_BAUD_RATE; +static int m68328_console_cbaud = DEFAULT_CBAUD; + + +static inline int serial_paranoia_check(struct m68k_serial *info, + char *name, const char *routine) +{ +#ifdef SERIAL_PARANOIA_CHECK + static const char *badmagic = + "Warning: bad magic number for serial struct %s in %s\n"; + static const char *badinfo = + "Warning: null m68k_serial for %s in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != SERIAL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#endif + return 0; +} + +/* + * This is used to figure out the divisor speeds and the timeouts + */ +static int baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, + 9600, 19200, 38400, 57600, 115200, 0 }; + +/* Sets or clears DTR/RTS on the requested line */ +static inline void m68k_rtsdtr(struct m68k_serial *ss, int set) +{ + if (set) { + /* set the RTS/CTS line */ + } else { + /* clear it */ + } + return; +} + +/* Utility routines */ +static inline int get_baud(struct m68k_serial *ss) +{ + unsigned long result = 115200; + unsigned short int baud = uart_addr[ss->line].ubaud; + if (GET_FIELD(baud, UBAUD_PRESCALER) == 0x38) result = 38400; + result >>= GET_FIELD(baud, UBAUD_DIVIDE); + + return result; +} + +/* + * ------------------------------------------------------------ + * rs_stop() and rs_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + * ------------------------------------------------------------ + */ +static void rs_stop(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_stop")) + return; + + local_irq_save(flags); + uart->ustcnt &= ~USTCNT_TXEN; + local_irq_restore(flags); +} + +static int rs_put_char(char ch) +{ + int flags, loops = 0; + + local_irq_save(flags); + + while (!(UTX & UTX_TX_AVAIL) && (loops < 1000)) { + loops++; + udelay(5); + } + + UTX_TXDATA = ch; + udelay(5); + local_irq_restore(flags); + return 1; +} + +static void rs_start(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_start")) + return; + + local_irq_save(flags); + if (info->xmit_cnt && info->xmit_buf && !(uart->ustcnt & USTCNT_TXEN)) { +#ifdef USE_INTS + uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK; +#else + uart->ustcnt |= USTCNT_TXEN; +#endif + } + local_irq_restore(flags); +} + +/* Drop into either the boot monitor or kadb upon receiving a break + * from keyboard/console input. + */ +static void batten_down_hatches(void) +{ + /* Drop into the debugger */ +} + +static void status_handle(struct m68k_serial *info, unsigned short status) +{ +#if 0 + if(status & DCD) { + if((info->port.tty->termios->c_cflag & CRTSCTS) && + ((info->curregs[3] & AUTO_ENAB)==0)) { + info->curregs[3] |= AUTO_ENAB; + info->pendregs[3] |= AUTO_ENAB; + write_zsreg(info->m68k_channel, 3, info->curregs[3]); + } + } else { + if((info->curregs[3] & AUTO_ENAB)) { + info->curregs[3] &= ~AUTO_ENAB; + info->pendregs[3] &= ~AUTO_ENAB; + write_zsreg(info->m68k_channel, 3, info->curregs[3]); + } + } +#endif + /* If this is console input and this is a + * 'break asserted' status change interrupt + * see if we can drop into the debugger + */ + if((status & URX_BREAK) && info->break_abort) + batten_down_hatches(); + return; +} + +static void receive_chars(struct m68k_serial *info, unsigned short rx) +{ + struct tty_struct *tty = info->port.tty; + m68328_uart *uart = &uart_addr[info->line]; + unsigned char ch, flag; + + /* + * This do { } while() loop will get ALL chars out of Rx FIFO + */ +#ifndef CONFIG_XCOPILOT_BUGS + do { +#endif + ch = GET_FIELD(rx, URX_RXDATA); + + if(info->is_cons) { + if(URX_BREAK & rx) { /* whee, break received */ + status_handle(info, rx); + return; +#ifdef CONFIG_MAGIC_SYSRQ + } else if (ch == 0x10) { /* ^P */ + show_state(); + show_free_areas(); + show_buffers(); +/* show_net_buffers(); */ + return; + } else if (ch == 0x12) { /* ^R */ + emergency_restart(); + return; +#endif /* CONFIG_MAGIC_SYSRQ */ + } + } + + if(!tty) + goto clear_and_exit; + + flag = TTY_NORMAL; + + if(rx & URX_PARITY_ERROR) { + flag = TTY_PARITY; + status_handle(info, rx); + } else if(rx & URX_OVRUN) { + flag = TTY_OVERRUN; + status_handle(info, rx); + } else if(rx & URX_FRAME_ERROR) { + flag = TTY_FRAME; + status_handle(info, rx); + } + tty_insert_flip_char(tty, ch, flag); +#ifndef CONFIG_XCOPILOT_BUGS + } while((rx = uart->urx.w) & URX_DATA_READY); +#endif + + tty_schedule_flip(tty); + +clear_and_exit: + return; +} + +static void transmit_chars(struct m68k_serial *info) +{ + m68328_uart *uart = &uart_addr[info->line]; + + if (info->x_char) { + /* Send next char */ + uart->utx.b.txdata = info->x_char; + info->x_char = 0; + goto clear_and_return; + } + + if((info->xmit_cnt <= 0) || info->port.tty->stopped) { + /* That's peculiar... TX ints off */ + uart->ustcnt &= ~USTCNT_TX_INTR_MASK; + goto clear_and_return; + } + + /* Send char */ + uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + + if (info->xmit_cnt < WAKEUP_CHARS) + schedule_work(&info->tqueue); + + if(info->xmit_cnt <= 0) { + /* All done for now... TX ints off */ + uart->ustcnt &= ~USTCNT_TX_INTR_MASK; + goto clear_and_return; + } + +clear_and_return: + /* Clear interrupt (should be auto)*/ + return; +} + +/* + * This is the serial driver's generic interrupt routine + */ +irqreturn_t rs_interrupt(int irq, void *dev_id) +{ + struct m68k_serial *info = dev_id; + m68328_uart *uart; + unsigned short rx; + unsigned short tx; + + uart = &uart_addr[info->line]; + rx = uart->urx.w; + +#ifdef USE_INTS + tx = uart->utx.w; + + if (rx & URX_DATA_READY) receive_chars(info, rx); + if (tx & UTX_TX_AVAIL) transmit_chars(info); +#else + receive_chars(info, rx); +#endif + return IRQ_HANDLED; +} + +static void do_softint(struct work_struct *work) +{ + struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue); + struct tty_struct *tty; + + tty = info->port.tty; + if (!tty) + return; +#if 0 + if (clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) { + tty_wakeup(tty); + } +#endif +} + +/* + * This routine is called from the scheduler tqueue when the interrupt + * routine has signalled that a hangup has occurred. The path of + * hangup processing is: + * + * serial interrupt routine -> (scheduler tqueue) -> + * do_serial_hangup() -> tty->hangup() -> rs_hangup() + * + */ +static void do_serial_hangup(struct work_struct *work) +{ + struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue_hangup); + struct tty_struct *tty; + + tty = info->port.tty; + if (!tty) + return; + + tty_hangup(tty); +} + + +static int startup(struct m68k_serial * info) +{ + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (info->flags & S_INITIALIZED) + return 0; + + if (!info->xmit_buf) { + info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL); + if (!info->xmit_buf) + return -ENOMEM; + } + + local_irq_save(flags); + + /* + * Clear the FIFO buffers and disable them + * (they will be reenabled in change_speed()) + */ + + uart->ustcnt = USTCNT_UEN; + info->xmit_fifo_size = 1; + uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN; + (void)uart->urx.w; + + /* + * Finally, enable sequencing and interrupts + */ +#ifdef USE_INTS + uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | + USTCNT_RX_INTR_MASK | USTCNT_TX_INTR_MASK; +#else + uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK; +#endif + + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + /* + * and set the speed of the serial port + */ + + change_speed(info); + + info->flags |= S_INITIALIZED; + local_irq_restore(flags); + return 0; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void shutdown(struct m68k_serial * info) +{ + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + uart->ustcnt = 0; /* All off! */ + if (!(info->flags & S_INITIALIZED)) + return; + + local_irq_save(flags); + + if (info->xmit_buf) { + free_page((unsigned long) info->xmit_buf); + info->xmit_buf = 0; + } + + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->flags &= ~S_INITIALIZED; + local_irq_restore(flags); +} + +struct { + int divisor, prescale; +} +#ifndef CONFIG_M68VZ328 + hw_baud_table[18] = { + {0,0}, /* 0 */ + {0,0}, /* 50 */ + {0,0}, /* 75 */ + {0,0}, /* 110 */ + {0,0}, /* 134 */ + {0,0}, /* 150 */ + {0,0}, /* 200 */ + {7,0x26}, /* 300 */ + {6,0x26}, /* 600 */ + {5,0x26}, /* 1200 */ + {0,0}, /* 1800 */ + {4,0x26}, /* 2400 */ + {3,0x26}, /* 4800 */ + {2,0x26}, /* 9600 */ + {1,0x26}, /* 19200 */ + {0,0x26}, /* 38400 */ + {1,0x38}, /* 57600 */ + {0,0x38}, /* 115200 */ +}; +#else + hw_baud_table[18] = { + {0,0}, /* 0 */ + {0,0}, /* 50 */ + {0,0}, /* 75 */ + {0,0}, /* 110 */ + {0,0}, /* 134 */ + {0,0}, /* 150 */ + {0,0}, /* 200 */ + {0,0}, /* 300 */ + {7,0x26}, /* 600 */ + {6,0x26}, /* 1200 */ + {0,0}, /* 1800 */ + {5,0x26}, /* 2400 */ + {4,0x26}, /* 4800 */ + {3,0x26}, /* 9600 */ + {2,0x26}, /* 19200 */ + {1,0x26}, /* 38400 */ + {0,0x26}, /* 57600 */ + {1,0x38}, /* 115200 */ +}; +#endif +/* rate = 1036800 / ((65 - prescale) * (1<line]; + unsigned short port; + unsigned short ustcnt; + unsigned cflag; + int i; + + if (!info->port.tty || !info->port.tty->termios) + return; + cflag = info->port.tty->termios->c_cflag; + if (!(port = info->port)) + return; + + ustcnt = uart->ustcnt; + uart->ustcnt = ustcnt & ~USTCNT_TXEN; + + i = cflag & CBAUD; + if (i & CBAUDEX) { + i = (i & ~CBAUDEX) + B38400; + } + + info->baud = baud_table[i]; + uart->ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) | + PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale); + + ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7); + + if ((cflag & CSIZE) == CS8) + ustcnt |= USTCNT_8_7; + + if (cflag & CSTOPB) + ustcnt |= USTCNT_STOP; + + if (cflag & PARENB) + ustcnt |= USTCNT_PARITYEN; + if (cflag & PARODD) + ustcnt |= USTCNT_ODD_EVEN; + +#ifdef CONFIG_SERIAL_68328_RTS_CTS + if (cflag & CRTSCTS) { + uart->utx.w &= ~ UTX_NOCTS; + } else { + uart->utx.w |= UTX_NOCTS; + } +#endif + + ustcnt |= USTCNT_TXEN; + + uart->ustcnt = ustcnt; + return; +} + +/* + * Fair output driver allows a process to speak. + */ +static void rs_fair_output(void) +{ + int left; /* Output no more than that */ + unsigned long flags; + struct m68k_serial *info = &m68k_soft[0]; + char c; + + if (info == 0) return; + if (info->xmit_buf == 0) return; + + local_irq_save(flags); + left = info->xmit_cnt; + while (left != 0) { + c = info->xmit_buf[info->xmit_tail]; + info->xmit_tail = (info->xmit_tail+1) & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + local_irq_restore(flags); + + rs_put_char(c); + + local_irq_save(flags); + left = min(info->xmit_cnt, left-1); + } + + /* Last character is being transmitted now (hopefully). */ + udelay(5); + + local_irq_restore(flags); + return; +} + +/* + * m68k_console_print is registered for printk. + */ +void console_print_68328(const char *p) +{ + char c; + + while((c=*(p++)) != 0) { + if(c == '\n') + rs_put_char('\r'); + rs_put_char(c); + } + + /* Comment this if you want to have a strict interrupt-driven output */ + rs_fair_output(); + + return; +} + +static void rs_set_ldisc(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_set_ldisc")) + return; + + info->is_cons = (tty->termios->c_line == N_TTY); + + printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" : "off"); +} + +static void rs_flush_chars(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) + return; +#ifndef USE_INTS + for(;;) { +#endif + + /* Enable transmitter */ + local_irq_save(flags); + + if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !info->xmit_buf) { + local_irq_restore(flags); + return; + } + +#ifdef USE_INTS + uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK; +#else + uart->ustcnt |= USTCNT_TXEN; +#endif + +#ifdef USE_INTS + if (uart->utx.w & UTX_TX_AVAIL) { +#else + if (1) { +#endif + /* Send char */ + uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + } + +#ifndef USE_INTS + while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5); + } +#endif + local_irq_restore(flags); +} + +extern void console_printn(const char * b, int count); + +static int rs_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + int c, total = 0; + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_write")) + return 0; + + if (!tty || !info->xmit_buf) + return 0; + + local_save_flags(flags); + while (1) { + local_irq_disable(); + c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + SERIAL_XMIT_SIZE - info->xmit_head)); + local_irq_restore(flags); + + if (c <= 0) + break; + + memcpy(info->xmit_buf + info->xmit_head, buf, c); + + local_irq_disable(); + info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt += c; + local_irq_restore(flags); + buf += c; + count -= c; + total += c; + } + + if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { + /* Enable transmitter */ + local_irq_disable(); +#ifndef USE_INTS + while(info->xmit_cnt) { +#endif + + uart->ustcnt |= USTCNT_TXEN; +#ifdef USE_INTS + uart->ustcnt |= USTCNT_TX_INTR_MASK; +#else + while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5); +#endif + if (uart->utx.w & UTX_TX_AVAIL) { + uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + } + +#ifndef USE_INTS + } +#endif + local_irq_restore(flags); + } + + return total; +} + +static int rs_write_room(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + int ret; + + if (serial_paranoia_check(info, tty->name, "rs_write_room")) + return 0; + ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + return ret; +} + +static int rs_chars_in_buffer(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) + return 0; + return info->xmit_cnt; +} + +static void rs_flush_buffer(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) + return; + local_irq_save(flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + local_irq_restore(flags); + tty_wakeup(tty); +} + +/* + * ------------------------------------------------------------ + * rs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void rs_throttle(struct tty_struct * tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_throttle")) + return; + + if (I_IXOFF(tty)) + info->x_char = STOP_CHAR(tty); + + /* Turn off RTS line (do this atomic) */ +} + +static void rs_unthrottle(struct tty_struct * tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + info->x_char = START_CHAR(tty); + } + + /* Assert RTS line (do this atomic) */ +} + +/* + * ------------------------------------------------------------ + * rs_ioctl() and friends + * ------------------------------------------------------------ + */ + +static int get_serial_info(struct m68k_serial * info, + struct serial_struct * retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tmp.type = info->type; + tmp.line = info->line; + tmp.port = info->port; + tmp.irq = info->irq; + tmp.flags = info->flags; + tmp.baud_base = info->baud_base; + tmp.close_delay = info->close_delay; + tmp.closing_wait = info->closing_wait; + tmp.custom_divisor = info->custom_divisor; + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + + return 0; +} + +static int set_serial_info(struct m68k_serial * info, + struct serial_struct * new_info) +{ + struct serial_struct new_serial; + struct m68k_serial old_info; + int retval = 0; + + if (!new_info) + return -EFAULT; + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; + old_info = *info; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.baud_base != info->baud_base) || + (new_serial.type != info->type) || + (new_serial.close_delay != info->close_delay) || + ((new_serial.flags & ~S_USR_MASK) != + (info->flags & ~S_USR_MASK))) + return -EPERM; + info->flags = ((info->flags & ~S_USR_MASK) | + (new_serial.flags & S_USR_MASK)); + info->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + if (info->count > 1) + return -EBUSY; + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + info->baud_base = new_serial.baud_base; + info->flags = ((info->flags & ~S_FLAGS) | + (new_serial.flags & S_FLAGS)); + info->type = new_serial.type; + info->close_delay = new_serial.close_delay; + info->closing_wait = new_serial.closing_wait; + +check_and_exit: + retval = startup(info); + return retval; +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct m68k_serial * info, unsigned int *value) +{ +#ifdef CONFIG_SERIAL_68328_RTS_CTS + m68328_uart *uart = &uart_addr[info->line]; +#endif + unsigned char status; + unsigned long flags; + + local_irq_save(flags); +#ifdef CONFIG_SERIAL_68328_RTS_CTS + status = (uart->utx.w & UTX_CTS_STAT) ? 1 : 0; +#else + status = 0; +#endif + local_irq_restore(flags); + return put_user(status, value); +} + +/* + * This routine sends a break character out the serial port. + */ +static void send_break(struct m68k_serial * info, unsigned int duration) +{ + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + if (!info->port) + return; + local_irq_save(flags); +#ifdef USE_INTS + uart->utx.w |= UTX_SEND_BREAK; + msleep_interruptible(duration); + uart->utx.w &= ~UTX_SEND_BREAK; +#endif + local_irq_restore(flags); +} + +static int rs_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + int error; + struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; + int retval; + + if (serial_paranoia_check(info, tty->name, "rs_ioctl")) + return -ENODEV; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && + (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TCSBRK: /* SVID version: non-zero arg --> no break */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + if (!arg) + send_break(info, 250); /* 1/4 second */ + return 0; + case TCSBRKP: /* support for POSIX tcsendbreak() */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + send_break(info, arg ? arg*(100) : 250); + return 0; + case TIOCGSERIAL: + return get_serial_info(info, + (struct serial_struct *) arg); + case TIOCSSERIAL: + return set_serial_info(info, + (struct serial_struct *) arg); + case TIOCSERGETLSR: /* Get line status register */ + return get_lsr_info(info, (unsigned int *) arg); + case TIOCSERGSTRUCT: + if (copy_to_user((struct m68k_serial *) arg, + info, sizeof(struct m68k_serial))) + return -EFAULT; + return 0; + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + change_speed(info); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + rs_start(tty); + } + +} + +/* + * ------------------------------------------------------------ + * rs_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * S structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void rs_close(struct tty_struct *tty, struct file * filp) +{ + struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (!info || serial_paranoia_check(info, tty->name, "rs_close")) + return; + + local_irq_save(flags); + + if (tty_hung_up_p(filp)) { + local_irq_restore(flags); + return; + } + + if ((tty->count == 1) && (info->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. Info->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk("rs_close: bad serial port count; tty->count is 1, " + "info->count is %d\n", info->count); + info->count = 1; + } + if (--info->count < 0) { + printk("rs_close: bad serial port count for ttyS%d: %d\n", + info->line, info->count); + info->count = 0; + } + if (info->count) { + local_irq_restore(flags); + return; + } + info->flags |= S_CLOSING; + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + if (info->closing_wait != S_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, info->closing_wait); + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + + uart->ustcnt &= ~USTCNT_RXEN; + uart->ustcnt &= ~(USTCNT_RXEN | USTCNT_RX_INTR_MASK); + + shutdown(info); + rs_flush_buffer(tty); + + tty_ldisc_flush(tty); + tty->closing = 0; + info->event = 0; + info->port.tty = NULL; +#warning "This is not and has never been valid so fix it" +#if 0 + if (tty->ldisc.num != ldiscs[N_TTY].num) { + if (tty->ldisc.close) + (tty->ldisc.close)(tty); + tty->ldisc = ldiscs[N_TTY]; + tty->termios->c_line = N_TTY; + if (tty->ldisc.open) + (tty->ldisc.open)(tty); + } +#endif + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs(info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(S_NORMAL_ACTIVE|S_CLOSING); + wake_up_interruptible(&info->close_wait); + local_irq_restore(flags); +} + +/* + * rs_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +void rs_hangup(struct tty_struct *tty) +{ + struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_hangup")) + return; + + rs_flush_buffer(tty); + shutdown(info); + info->event = 0; + info->count = 0; + info->flags &= ~S_NORMAL_ACTIVE; + info->port.tty = NULL; + wake_up_interruptible(&info->open_wait); +} + +/* + * ------------------------------------------------------------ + * rs_open() and friends + * ------------------------------------------------------------ + */ +static int block_til_ready(struct tty_struct *tty, struct file * filp, + struct m68k_serial *info) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + int do_clocal = 0; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (info->flags & S_CLOSING) { + interruptible_sleep_on(&info->close_wait); +#ifdef SERIAL_DO_RESTART + if (info->flags & S_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; +#else + return -EAGAIN; +#endif + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + info->flags |= S_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); + + info->count--; + info->blocked_open++; + while (1) { + local_irq_disable(); + m68k_rtsdtr(info, 1); + local_irq_enable(); + current->state = TASK_INTERRUPTIBLE; + if (tty_hung_up_p(filp) || + !(info->flags & S_INITIALIZED)) { +#ifdef SERIAL_DO_RESTART + if (info->flags & S_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; +#else + retval = -EAGAIN; +#endif + break; + } + if (!(info->flags & S_CLOSING) && do_clocal) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + tty_unlock(); + schedule(); + tty_lock(); + } + current->state = TASK_RUNNING; + remove_wait_queue(&info->open_wait, &wait); + if (!tty_hung_up_p(filp)) + info->count++; + info->blocked_open--; + + if (retval) + return retval; + info->flags |= S_NORMAL_ACTIVE; + return 0; +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its S structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +int rs_open(struct tty_struct *tty, struct file * filp) +{ + struct m68k_serial *info; + int retval, line; + + line = tty->index; + + if (line >= NR_PORTS || line < 0) /* we have exactly one */ + return -ENODEV; + + info = &m68k_soft[line]; + + if (serial_paranoia_check(info, tty->name, "rs_open")) + return -ENODEV; + + info->count++; + tty->driver_data = info; + info->port.tty = tty; + + /* + * Start up serial port + */ + retval = startup(info); + if (retval) + return retval; + + return block_til_ready(tty, filp, info); +} + +/* Finally, routines used to initialize the serial driver. */ + +static void show_serial_version(void) +{ + printk("MC68328 serial driver version 1.00\n"); +} + +static const struct tty_operations rs_ops = { + .open = rs_open, + .close = rs_close, + .write = rs_write, + .flush_chars = rs_flush_chars, + .write_room = rs_write_room, + .chars_in_buffer = rs_chars_in_buffer, + .flush_buffer = rs_flush_buffer, + .ioctl = rs_ioctl, + .throttle = rs_throttle, + .unthrottle = rs_unthrottle, + .set_termios = rs_set_termios, + .stop = rs_stop, + .start = rs_start, + .hangup = rs_hangup, + .set_ldisc = rs_set_ldisc, +}; + +/* rs_init inits the driver */ +static int __init +rs68328_init(void) +{ + int flags, i; + struct m68k_serial *info; + + serial_driver = alloc_tty_driver(NR_PORTS); + if (!serial_driver) + return -ENOMEM; + + show_serial_version(); + + /* Initialize the tty_driver structure */ + /* SPARC: Not all of this is exactly right for us. */ + + serial_driver->name = "ttyS"; + serial_driver->major = TTY_MAJOR; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + m68328_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &rs_ops); + + if (tty_register_driver(serial_driver)) { + put_tty_driver(serial_driver); + printk(KERN_ERR "Couldn't register serial driver\n"); + return -ENOMEM; + } + + local_irq_save(flags); + + for(i=0;imagic = SERIAL_MAGIC; + info->port = (int) &uart_addr[i]; + info->port.tty = NULL; + info->irq = uart_irqs[i]; + info->custom_divisor = 16; + info->close_delay = 50; + info->closing_wait = 3000; + info->x_char = 0; + info->event = 0; + info->count = 0; + info->blocked_open = 0; + INIT_WORK(&info->tqueue, do_softint); + INIT_WORK(&info->tqueue_hangup, do_serial_hangup); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + info->line = i; + info->is_cons = 1; /* Means shortcuts work */ + + printk("%s%d at 0x%08x (irq = %d)", serial_driver->name, info->line, + info->port, info->irq); + printk(" is a builtin MC68328 UART\n"); + +#ifdef CONFIG_M68VZ328 + if (i > 0 ) + PJSEL &= 0xCF; /* PSW enable second port output */ +#endif + + if (request_irq(uart_irqs[i], + rs_interrupt, + IRQF_DISABLED, + "M68328_UART", info)) + panic("Unable to attach 68328 serial interrupt\n"); + } + local_irq_restore(flags); + return 0; +} + +module_init(rs68328_init); + + + +static void m68328_set_baud(void) +{ + unsigned short ustcnt; + int i; + + ustcnt = USTCNT; + USTCNT = ustcnt & ~USTCNT_TXEN; + +again: + for (i = 0; i < ARRAY_SIZE(baud_table); i++) + if (baud_table[i] == m68328_console_baud) + break; + if (i >= ARRAY_SIZE(baud_table)) { + m68328_console_baud = 9600; + goto again; + } + + UBAUD = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) | + PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale); + ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7); + ustcnt |= USTCNT_8_7; + ustcnt |= USTCNT_TXEN; + USTCNT = ustcnt; + m68328_console_initted = 1; + return; +} + + +int m68328_console_setup(struct console *cp, char *arg) +{ + int i, n = CONSOLE_BAUD_RATE; + + if (!cp) + return(-1); + + if (arg) + n = simple_strtoul(arg,NULL,0); + + for (i = 0; i < ARRAY_SIZE(baud_table); i++) + if (baud_table[i] == n) + break; + if (i < ARRAY_SIZE(baud_table)) { + m68328_console_baud = n; + m68328_console_cbaud = 0; + if (i > 15) { + m68328_console_cbaud |= CBAUDEX; + i -= 15; + } + m68328_console_cbaud |= i; + } + + m68328_set_baud(); /* make sure baud rate changes */ + return(0); +} + + +static struct tty_driver *m68328_console_device(struct console *c, int *index) +{ + *index = c->index; + return serial_driver; +} + + +void m68328_console_write (struct console *co, const char *str, + unsigned int count) +{ + if (!m68328_console_initted) + m68328_set_baud(); + while (count--) { + if (*str == '\n') + rs_put_char('\r'); + rs_put_char( *str++ ); + } +} + + +static struct console m68328_driver = { + .name = "ttyS", + .write = m68328_console_write, + .device = m68328_console_device, + .setup = m68328_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + + +static int __init m68328_console_init(void) +{ + register_console(&m68328_driver); + return 0; +} + +console_initcall(m68328_console_init); diff --git a/drivers/tty/serial/68328serial.h b/drivers/tty/serial/68328serial.h new file mode 100644 index 000000000000..664ceb0a158c --- /dev/null +++ b/drivers/tty/serial/68328serial.h @@ -0,0 +1,188 @@ +/* 68328serial.h: Definitions for the mc68328 serial driver. + * + * Copyright (C) 1995 David S. Miller + * Copyright (C) 1998 Kenneth Albanowski + * Copyright (C) 1998, 1999 D. Jeff Dionne + * Copyright (C) 1999 Vladimir Gurevich + * + * VZ Support/Fixes Evan Stawnyczy + */ + +#ifndef _MC683XX_SERIAL_H +#define _MC683XX_SERIAL_H + + +struct serial_struct { + int type; + int line; + int port; + int irq; + int flags; + int xmit_fifo_size; + int custom_divisor; + int baud_base; + unsigned short close_delay; + char reserved_char[2]; + int hub6; /* FIXME: We don't have AT&T Hub6 boards! */ + unsigned short closing_wait; /* time to wait before closing */ + unsigned short closing_wait2; /* no longer used... */ + int reserved[4]; +}; + +/* + * For the close wait times, 0 means wait forever for serial port to + * flush its output. 65535 means don't wait at all. + */ +#define S_CLOSING_WAIT_INF 0 +#define S_CLOSING_WAIT_NONE 65535 + +/* + * Definitions for S_struct (and serial_struct) flags field + */ +#define S_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes + on the callout port */ +#define S_FOURPORT 0x0002 /* Set OU1, OUT2 per AST Fourport settings */ +#define S_SAK 0x0004 /* Secure Attention Key (Orange book) */ +#define S_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */ + +#define S_SPD_MASK 0x0030 +#define S_SPD_HI 0x0010 /* Use 56000 instead of 38400 bps */ + +#define S_SPD_VHI 0x0020 /* Use 115200 instead of 38400 bps */ +#define S_SPD_CUST 0x0030 /* Use user-specified divisor */ + +#define S_SKIP_TEST 0x0040 /* Skip UART test during autoconfiguration */ +#define S_AUTO_IRQ 0x0080 /* Do automatic IRQ during autoconfiguration */ +#define S_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */ +#define S_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */ +#define S_CALLOUT_NOHUP 0x0400 /* Don't do hangups for cua device */ + +#define S_FLAGS 0x0FFF /* Possible legal S flags */ +#define S_USR_MASK 0x0430 /* Legal flags that non-privileged + * users can set or reset */ + +/* Internal flags used only by kernel/chr_drv/serial.c */ +#define S_INITIALIZED 0x80000000 /* Serial port was initialized */ +#define S_CALLOUT_ACTIVE 0x40000000 /* Call out device is active */ +#define S_NORMAL_ACTIVE 0x20000000 /* Normal device is active */ +#define S_BOOT_AUTOCONF 0x10000000 /* Autoconfigure port on bootup */ +#define S_CLOSING 0x08000000 /* Serial port is closing */ +#define S_CTS_FLOW 0x04000000 /* Do CTS flow control */ +#define S_CHECK_CD 0x02000000 /* i.e., CLOCAL */ + +/* Software state per channel */ + +#ifdef __KERNEL__ + +/* + * I believe this is the optimal setting that reduces the number of interrupts. + * At high speeds the output might become a little "bursted" (use USTCNT_TXHE + * if that bothers you), but in most cases it will not, since we try to + * transmit characters every time rs_interrupt is called. Thus, quite often + * you'll see that a receive interrupt occures before the transmit one. + * -- Vladimir Gurevich + */ +#define USTCNT_TX_INTR_MASK (USTCNT_TXEE) + +/* + * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special + * "Old data interrupt" which occures whenever the data stay in the FIFO + * longer than 30 bits time. This allows us to use FIFO without compromising + * latency. '328 does not have this feature and without the real 328-based + * board I would assume that RXRE is the safest setting. + * + * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of + * interrupts. RXFE (receive queue full) causes the system to lose data + * at least at 115200 baud + * + * If your board is busy doing other stuff, you might consider to use + * RXRE (data ready intrrupt) instead. + * + * The other option is to make these INTR masks run-time configurable, so + * that people can dynamically adapt them according to the current usage. + * -- Vladimir Gurevich + */ + +/* (es) */ +#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328) +#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN) +#elif defined(CONFIG_M68328) +#define USTCNT_RX_INTR_MASK (USTCNT_RXRE) +#else +#error Please, define the Rx interrupt events for your CPU +#endif +/* (/es) */ + +/* + * This is our internal structure for each serial port's state. + * + * Many fields are paralleled by the structure used by the serial_struct + * structure. + * + * For definitions of the flags field, see tty.h + */ + +struct m68k_serial { + char soft_carrier; /* Use soft carrier on this channel */ + char break_abort; /* Is serial console in, so process brk/abrt */ + char is_cons; /* Is this our console. */ + + /* We need to know the current clock divisor + * to read the bps rate the chip has currently + * loaded. + */ + unsigned char clk_divisor; /* May be 1, 16, 32, or 64 */ + int baud; + int magic; + int baud_base; + int port; + int irq; + int flags; /* defined in tty.h */ + int type; /* UART type */ + struct tty_struct *tty; + int read_status_mask; + int ignore_status_mask; + int timeout; + int xmit_fifo_size; + int custom_divisor; + int x_char; /* xon/xoff character */ + int close_delay; + unsigned short closing_wait; + unsigned short closing_wait2; + unsigned long event; + unsigned long last_active; + int line; + int count; /* # of fd on device */ + int blocked_open; /* # of blocked opens */ + unsigned char *xmit_buf; + int xmit_head; + int xmit_tail; + int xmit_cnt; + struct work_struct tqueue; + struct work_struct tqueue_hangup; + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; +}; + + +#define SERIAL_MAGIC 0x5301 + +/* + * The size of the serial xmit buffer is 1 page, or 4096 bytes + */ +#define SERIAL_XMIT_SIZE 4096 + +/* + * Events are used to schedule things to happen at timer-interrupt + * time, instead of at rs interrupt time. + */ +#define RS_EVENT_WRITE_WAKEUP 0 + +/* + * Define the number of ports supported and their irqs. + */ +#define NR_PORTS 1 +#define UART_IRQ_DEFNS {UART_IRQ_NUM} + +#endif /* __KERNEL__ */ +#endif /* !(_MC683XX_SERIAL_H) */ diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c new file mode 100644 index 000000000000..88b13356ec10 --- /dev/null +++ b/drivers/tty/serial/68360serial.c @@ -0,0 +1,2978 @@ +/* + * UART driver for 68360 CPM SCC or SMC + * Copyright (c) 2000 D. Jeff Dionne , + * Copyright (c) 2000 Michael Leslie + * Copyright (c) 1997 Dan Malek + * + * I used the serial.c driver as the framework for this driver. + * Give credit to those guys. + * The original code was written for the MBX860 board. I tried to make + * it generic, but there may be some assumptions in the structures that + * have to be fixed later. + * To save porting time, I did not bother to change any object names + * that are not accessed outside of this file. + * It still needs lots of work........When it was easy, I included code + * to support the SCCs, but this has never been tested, nor is it complete. + * Only the SCCs support modem control, so that is not complete either. + * + * This module exports the following rs232 io functions: + * + * int rs_360_init(void); + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#ifdef CONFIG_KGDB +extern void breakpoint(void); +extern void set_debug_traps(void); +extern int kgdb_output_string (const char* s, unsigned int count); +#endif + + +/* #ifdef CONFIG_SERIAL_CONSOLE */ /* This seems to be a post 2.0 thing - mles */ +#include +#include + +/* this defines the index into rs_table for the port to use + */ +#ifndef CONFIG_SERIAL_CONSOLE_PORT +#define CONFIG_SERIAL_CONSOLE_PORT 1 /* ie SMC2 - note USE_SMC2 must be defined */ +#endif +/* #endif */ + +#if 0 +/* SCC2 for console + */ +#undef CONFIG_SERIAL_CONSOLE_PORT +#define CONFIG_SERIAL_CONSOLE_PORT 2 +#endif + + +#define TX_WAKEUP ASYNC_SHARE_IRQ + +static char *serial_name = "CPM UART driver"; +static char *serial_version = "0.03"; + +static struct tty_driver *serial_driver; +int serial_console_setup(struct console *co, char *options); + +/* + * Serial driver configuration section. Here are the various options: + */ +#define SERIAL_PARANOIA_CHECK +#define CONFIG_SERIAL_NOPAUSE_IO +#define SERIAL_DO_RESTART + +/* Set of debugging defines */ + +#undef SERIAL_DEBUG_INTR +#undef SERIAL_DEBUG_OPEN +#undef SERIAL_DEBUG_FLOW +#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + +#define _INLINE_ inline + +#define DBG_CNT(s) + +/* We overload some of the items in the data structure to meet our + * needs. For example, the port address is the CPM parameter ram + * offset for the SCC or SMC. The maximum number of ports is 4 SCCs and + * 2 SMCs. The "hub6" field is used to indicate the channel number, with + * a flag indicating SCC or SMC, and the number is used as an index into + * the CPM parameter area for this device. + * The "type" field is currently set to 0, for PORT_UNKNOWN. It is + * not currently used. I should probably use it to indicate the port + * type of SMC or SCC. + * The SMCs do not support any modem control signals. + */ +#define smc_scc_num hub6 +#define NUM_IS_SCC ((int)0x00010000) +#define PORT_NUM(P) ((P) & 0x0000ffff) + + +#if defined (CONFIG_UCQUICC) + +volatile extern void *_periph_base; +/* sipex transceiver + * mode bits for are on pins + * + * SCC2 d16..19 + * SCC3 d20..23 + * SCC4 d24..27 + */ +#define SIPEX_MODE(n,m) ((m & 0x0f)<<(16+4*(n-1))) + +static uint sipex_mode_bits = 0x00000000; + +#endif + +/* There is no `serial_state' defined back here in 2.0. + * Try to get by with serial_struct + */ +/* #define serial_state serial_struct */ + +/* 2.4 -> 2.0 portability problem: async_icount in 2.4 has a few + * extras: */ + +#if 0 +struct async_icount_24 { + __u32 cts, dsr, rng, dcd, tx, rx; + __u32 frame, parity, overrun, brk; + __u32 buf_overrun; +} icount; +#endif + +#if 0 + +struct serial_state { + int magic; + int baud_base; + unsigned long port; + int irq; + int flags; + int hub6; + int type; + int line; + int revision; /* Chip revision (950) */ + int xmit_fifo_size; + int custom_divisor; + int count; + u8 *iomem_base; + u16 iomem_reg_shift; + unsigned short close_delay; + unsigned short closing_wait; /* time to wait before closing */ + struct async_icount_24 icount; + int io_type; + struct async_struct *info; +}; +#endif + +#define SSTATE_MAGIC 0x5302 + + + +/* SMC2 is sometimes used for low performance TDM interfaces. Define + * this as 1 if you want SMC2 as a serial port UART managed by this driver. + * Define this as 0 if you wish to use SMC2 for something else. + */ +#define USE_SMC2 1 + +#if 0 +/* Define SCC to ttySx mapping. */ +#define SCC_NUM_BASE (USE_SMC2 + 1) /* SCC base tty "number" */ + +/* Define which SCC is the first one to use for a serial port. These + * are 0-based numbers, i.e. this assumes the first SCC (SCC1) is used + * for Ethernet, and the first available SCC for serial UART is SCC2. + * NOTE: IF YOU CHANGE THIS, you have to change the PROFF_xxx and + * interrupt vectors in the table below to match. + */ +#define SCC_IDX_BASE 1 /* table index */ +#endif + + +/* Processors other than the 860 only get SMCs configured by default. + * Either they don't have SCCs or they are allocated somewhere else. + * Of course, there are now 860s without some SCCs, so we will need to + * address that someday. + * The Embedded Planet Multimedia I/O cards use TDM interfaces to the + * stereo codec parts, and we use SMC2 to help support that. + */ +static struct serial_state rs_table[] = { +/* type line PORT IRQ FLAGS smc_scc_num (F.K.A. hub6) */ + { 0, 0, PRSLOT_SMC1, CPMVEC_SMC1, 0, 0 } /* SMC1 ttyS0 */ +#if USE_SMC2 + ,{ 0, 0, PRSLOT_SMC2, CPMVEC_SMC2, 0, 1 } /* SMC2 ttyS1 */ +#endif + +#if defined(CONFIG_SERIAL_68360_SCC) + ,{ 0, 0, PRSLOT_SCC2, CPMVEC_SCC2, 0, (NUM_IS_SCC | 1) } /* SCC2 ttyS2 */ + ,{ 0, 0, PRSLOT_SCC3, CPMVEC_SCC3, 0, (NUM_IS_SCC | 2) } /* SCC3 ttyS3 */ + ,{ 0, 0, PRSLOT_SCC4, CPMVEC_SCC4, 0, (NUM_IS_SCC | 3) } /* SCC4 ttyS4 */ +#endif +}; + +#define NR_PORTS (sizeof(rs_table)/sizeof(struct serial_state)) + +/* The number of buffer descriptors and their sizes. + */ +#define RX_NUM_FIFO 4 +#define RX_BUF_SIZE 32 +#define TX_NUM_FIFO 4 +#define TX_BUF_SIZE 32 + +#define CONSOLE_NUM_FIFO 2 +#define CONSOLE_BUF_SIZE 4 + +char *console_fifos[CONSOLE_NUM_FIFO * CONSOLE_BUF_SIZE]; + +/* The async_struct in serial.h does not really give us what we + * need, so define our own here. + */ +typedef struct serial_info { + int magic; + int flags; + + struct serial_state *state; + /* struct serial_struct *state; */ + /* struct async_struct *state; */ + + struct tty_struct *tty; + int read_status_mask; + int ignore_status_mask; + int timeout; + int line; + int x_char; /* xon/xoff character */ + int close_delay; + unsigned short closing_wait; + unsigned short closing_wait2; + unsigned long event; + unsigned long last_active; + int blocked_open; /* # of blocked opens */ + struct work_struct tqueue; + struct work_struct tqueue_hangup; + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; + + +/* CPM Buffer Descriptor pointers. + */ + QUICC_BD *rx_bd_base; + QUICC_BD *rx_cur; + QUICC_BD *tx_bd_base; + QUICC_BD *tx_cur; +} ser_info_t; + + +/* since kmalloc_init() does not get called until much after this initialization: */ +static ser_info_t quicc_ser_info[NR_PORTS]; +static char rx_buf_pool[NR_PORTS * RX_NUM_FIFO * RX_BUF_SIZE]; +static char tx_buf_pool[NR_PORTS * TX_NUM_FIFO * TX_BUF_SIZE]; + +static void change_speed(ser_info_t *info); +static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout); + +static inline int serial_paranoia_check(ser_info_t *info, + char *name, const char *routine) +{ +#ifdef SERIAL_PARANOIA_CHECK + static const char *badmagic = + "Warning: bad magic number for serial struct (%s) in %s\n"; + static const char *badinfo = + "Warning: null async_struct for (%s) in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != SERIAL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#endif + return 0; +} + +/* + * This is used to figure out the divisor speeds and the timeouts, + * indexed by the termio value. The generic CPM functions are responsible + * for setting and assigning baud rate generators for us. + */ +static int baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, + 9600, 19200, 38400, 57600, 115200, 230400, 460800, 0 }; + +/* This sucks. There is a better way: */ +#if defined(CONFIG_CONSOLE_9600) + #define CONSOLE_BAUDRATE 9600 +#elif defined(CONFIG_CONSOLE_19200) + #define CONSOLE_BAUDRATE 19200 +#elif defined(CONFIG_CONSOLE_115200) + #define CONSOLE_BAUDRATE 115200 +#else + #warning "console baud rate undefined" + #define CONSOLE_BAUDRATE 9600 +#endif + +/* + * ------------------------------------------------------------ + * rs_stop() and rs_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + * ------------------------------------------------------------ + */ +static void rs_360_stop(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + int idx; + unsigned long flags; + volatile struct scc_regs *sccp; + volatile struct smc_regs *smcp; + + if (serial_paranoia_check(info, tty->name, "rs_stop")) + return; + + local_irq_save(flags); + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + sccp->scc_sccm &= ~UART_SCCM_TX; + } else { + /* smcp = &cpmp->cp_smc[idx]; */ + smcp = &pquicc->smc_regs[idx]; + smcp->smc_smcm &= ~SMCM_TX; + } + local_irq_restore(flags); +} + + +static void rs_360_start(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + int idx; + unsigned long flags; + volatile struct scc_regs *sccp; + volatile struct smc_regs *smcp; + + if (serial_paranoia_check(info, tty->name, "rs_stop")) + return; + + local_irq_save(flags); + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + sccp->scc_sccm |= UART_SCCM_TX; + } else { + smcp = &pquicc->smc_regs[idx]; + smcp->smc_smcm |= SMCM_TX; + } + local_irq_restore(flags); +} + +/* + * ---------------------------------------------------------------------- + * + * Here starts the interrupt handling routines. All of the following + * subroutines are declared as inline and are folded into + * rs_interrupt(). They were separated out for readability's sake. + * + * Note: rs_interrupt() is a "fast" interrupt, which means that it + * runs with interrupts turned off. People who may want to modify + * rs_interrupt() should try to keep the interrupt handler as fast as + * possible. After you are done making modifications, it is not a bad + * idea to do: + * + * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c + * + * and look at the resulting assemble code in serial.s. + * + * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 + * ----------------------------------------------------------------------- + */ + +static _INLINE_ void receive_chars(ser_info_t *info) +{ + struct tty_struct *tty = info->port.tty; + unsigned char ch, flag, *cp; + /*int ignored = 0;*/ + int i; + ushort status; + struct async_icount *icount; + /* struct async_icount_24 *icount; */ + volatile QUICC_BD *bdp; + + icount = &info->state->icount; + + /* Just loop through the closed BDs and copy the characters into + * the buffer. + */ + bdp = info->rx_cur; + for (;;) { + if (bdp->status & BD_SC_EMPTY) /* If this one is empty */ + break; /* we are all done */ + + /* The read status mask tell us what we should do with + * incoming characters, especially if errors occur. + * One special case is the use of BD_SC_EMPTY. If + * this is not set, we are supposed to be ignoring + * inputs. In this case, just mark the buffer empty and + * continue. + */ + if (!(info->read_status_mask & BD_SC_EMPTY)) { + bdp->status |= BD_SC_EMPTY; + bdp->status &= + ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV); + + if (bdp->status & BD_SC_WRAP) + bdp = info->rx_bd_base; + else + bdp++; + continue; + } + + /* Get the number of characters and the buffer pointer. + */ + i = bdp->length; + /* cp = (unsigned char *)__va(bdp->buf); */ + cp = (char *)bdp->buf; + status = bdp->status; + + while (i-- > 0) { + ch = *cp++; + icount->rx++; + +#ifdef SERIAL_DEBUG_INTR + printk("DR%02x:%02x...", ch, status); +#endif + flag = TTY_NORMAL; + + if (status & (BD_SC_BR | BD_SC_FR | + BD_SC_PR | BD_SC_OV)) { + /* + * For statistics only + */ + if (status & BD_SC_BR) + icount->brk++; + else if (status & BD_SC_PR) + icount->parity++; + else if (status & BD_SC_FR) + icount->frame++; + if (status & BD_SC_OV) + icount->overrun++; + + /* + * Now check to see if character should be + * ignored, and mask off conditions which + * should be ignored. + if (status & info->ignore_status_mask) { + if (++ignored > 100) + break; + continue; + } + */ + status &= info->read_status_mask; + + if (status & (BD_SC_BR)) { +#ifdef SERIAL_DEBUG_INTR + printk("handling break...."); +#endif + *tty->flip.flag_buf_ptr = TTY_BREAK; + if (info->flags & ASYNC_SAK) + do_SAK(tty); + } else if (status & BD_SC_PR) + flag = TTY_PARITY; + else if (status & BD_SC_FR) + flag = TTY_FRAME; + } + tty_insert_flip_char(tty, ch, flag); + if (status & BD_SC_OV) + /* + * Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + + /* This BD is ready to be used again. Clear status. + * Get next BD. + */ + bdp->status |= BD_SC_EMPTY; + bdp->status &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV); + + if (bdp->status & BD_SC_WRAP) + bdp = info->rx_bd_base; + else + bdp++; + } + + info->rx_cur = (QUICC_BD *)bdp; + + tty_schedule_flip(tty); +} + +static _INLINE_ void receive_break(ser_info_t *info) +{ + struct tty_struct *tty = info->port.tty; + + info->state->icount.brk++; + /* Check to see if there is room in the tty buffer for + * the break. If not, we exit now, losing the break. FIXME + */ + tty_insert_flip_char(tty, 0, TTY_BREAK); + tty_schedule_flip(tty); +} + +static _INLINE_ void transmit_chars(ser_info_t *info) +{ + + if ((info->flags & TX_WAKEUP) || + (info->port.tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) { + schedule_work(&info->tqueue); + } + +#ifdef SERIAL_DEBUG_INTR + printk("THRE..."); +#endif +} + +#ifdef notdef + /* I need to do this for the SCCs, so it is left as a reminder. + */ +static _INLINE_ void check_modem_status(struct async_struct *info) +{ + int status; + /* struct async_icount *icount; */ + struct async_icount_24 *icount; + + status = serial_in(info, UART_MSR); + + if (status & UART_MSR_ANY_DELTA) { + icount = &info->state->icount; + /* update input line counters */ + if (status & UART_MSR_TERI) + icount->rng++; + if (status & UART_MSR_DDSR) + icount->dsr++; + if (status & UART_MSR_DDCD) { + icount->dcd++; +#ifdef CONFIG_HARD_PPS + if ((info->flags & ASYNC_HARDPPS_CD) && + (status & UART_MSR_DCD)) + hardpps(); +#endif + } + if (status & UART_MSR_DCTS) + icount->cts++; + wake_up_interruptible(&info->delta_msr_wait); + } + + if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { +#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR)) + printk("ttys%d CD now %s...", info->line, + (status & UART_MSR_DCD) ? "on" : "off"); +#endif + if (status & UART_MSR_DCD) + wake_up_interruptible(&info->open_wait); + else { +#ifdef SERIAL_DEBUG_OPEN + printk("scheduling hangup..."); +#endif + queue_task(&info->tqueue_hangup, + &tq_scheduler); + } + } + if (info->flags & ASYNC_CTS_FLOW) { + if (info->port.tty->hw_stopped) { + if (status & UART_MSR_CTS) { +#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) + printk("CTS tx start..."); +#endif + info->port.tty->hw_stopped = 0; + info->IER |= UART_IER_THRI; + serial_out(info, UART_IER, info->IER); + rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); + return; + } + } else { + if (!(status & UART_MSR_CTS)) { +#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) + printk("CTS tx stop..."); +#endif + info->port.tty->hw_stopped = 1; + info->IER &= ~UART_IER_THRI; + serial_out(info, UART_IER, info->IER); + } + } + } +} +#endif + +/* + * This is the serial driver's interrupt routine for a single port + */ +/* static void rs_360_interrupt(void *dev_id) */ /* until and if we start servicing irqs here */ +static void rs_360_interrupt(int vec, void *dev_id) +{ + u_char events; + int idx; + ser_info_t *info; + volatile struct smc_regs *smcp; + volatile struct scc_regs *sccp; + + info = dev_id; + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + events = sccp->scc_scce; + if (events & SCCM_RX) + receive_chars(info); + if (events & SCCM_TX) + transmit_chars(info); + sccp->scc_scce = events; + } else { + smcp = &pquicc->smc_regs[idx]; + events = smcp->smc_smce; + if (events & SMCM_BRKE) + receive_break(info); + if (events & SMCM_RX) + receive_chars(info); + if (events & SMCM_TX) + transmit_chars(info); + smcp->smc_smce = events; + } + +#ifdef SERIAL_DEBUG_INTR + printk("rs_interrupt_single(%d, %x)...", + info->state->smc_scc_num, events); +#endif +#ifdef modem_control + check_modem_status(info); +#endif + info->last_active = jiffies; +#ifdef SERIAL_DEBUG_INTR + printk("end.\n"); +#endif +} + + +/* + * ------------------------------------------------------------------- + * Here ends the serial interrupt routines. + * ------------------------------------------------------------------- + */ + + +static void do_softint(void *private_) +{ + ser_info_t *info = (ser_info_t *) private_; + struct tty_struct *tty; + + tty = info->port.tty; + if (!tty) + return; + + if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) + tty_wakeup(tty); +} + + +/* + * This routine is called from the scheduler tqueue when the interrupt + * routine has signalled that a hangup has occurred. The path of + * hangup processing is: + * + * serial interrupt routine -> (scheduler tqueue) -> + * do_serial_hangup() -> tty->hangup() -> rs_hangup() + * + */ +static void do_serial_hangup(void *private_) +{ + struct async_struct *info = (struct async_struct *) private_; + struct tty_struct *tty; + + tty = info->port.tty; + if (!tty) + return; + + tty_hangup(tty); +} + + +static int startup(ser_info_t *info) +{ + unsigned long flags; + int retval=0; + int idx; + /*struct serial_state *state = info->state;*/ + volatile struct smc_regs *smcp; + volatile struct scc_regs *sccp; + volatile struct smc_uart_pram *up; + volatile struct uart_pram *scup; + + + local_irq_save(flags); + + if (info->flags & ASYNC_INITIALIZED) { + goto errout; + } + +#ifdef maybe + if (!state->port || !state->type) { + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + goto errout; + } +#endif + +#ifdef SERIAL_DEBUG_OPEN + printk("starting up ttys%d (irq %d)...", info->line, state->irq); +#endif + + +#ifdef modem_control + info->MCR = 0; + if (info->port.tty->termios->c_cflag & CBAUD) + info->MCR = UART_MCR_DTR | UART_MCR_RTS; +#endif + + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + + /* + * and set the speed of the serial port + */ + change_speed(info); + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + scup = &pquicc->pram[info->state->port].scc.pscc.u; + + scup->mrblr = RX_BUF_SIZE; + scup->max_idl = RX_BUF_SIZE; + + sccp->scc_sccm |= (UART_SCCM_TX | UART_SCCM_RX); + sccp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); + + } else { + smcp = &pquicc->smc_regs[idx]; + + /* Enable interrupts and I/O. + */ + smcp->smc_smcm |= (SMCM_RX | SMCM_TX); + smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN); + + /* We can tune the buffer length and idle characters + * to take advantage of the entire incoming buffer size. + * If mrblr is something other than 1, maxidl has to be + * non-zero or we never get an interrupt. The maxidl + * is the number of character times we wait after reception + * of the last character before we decide no more characters + * are coming. + */ + /* up = (smc_uart_t *)&pquicc->cp_dparam[state->port]; */ + /* holy unionized structures, Batman: */ + up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; + + up->mrblr = RX_BUF_SIZE; + up->max_idl = RX_BUF_SIZE; + + up->brkcr = 1; /* number of break chars */ + } + + info->flags |= ASYNC_INITIALIZED; + local_irq_restore(flags); + return 0; + +errout: + local_irq_restore(flags); + return retval; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void shutdown(ser_info_t *info) +{ + unsigned long flags; + struct serial_state *state; + int idx; + volatile struct smc_regs *smcp; + volatile struct scc_regs *sccp; + + if (!(info->flags & ASYNC_INITIALIZED)) + return; + + state = info->state; + +#ifdef SERIAL_DEBUG_OPEN + printk("Shutting down serial port %d (irq %d)....", info->line, + state->irq); +#endif + + local_irq_save(flags); + + idx = PORT_NUM(state->smc_scc_num); + if (state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + sccp->scc_gsmr.w.low &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#ifdef CONFIG_SERIAL_CONSOLE + /* We can't disable the transmitter if this is the + * system console. + */ + if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT) +#endif + sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); + } else { + smcp = &pquicc->smc_regs[idx]; + + /* Disable interrupts and I/O. + */ + smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX); +#ifdef CONFIG_SERIAL_CONSOLE + /* We can't disable the transmitter if this is the + * system console. + */ + if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT) +#endif + smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + } + + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; + local_irq_restore(flags); +} + +/* + * This routine is called to set the UART divisor registers to match + * the specified baud rate for a serial port. + */ +static void change_speed(ser_info_t *info) +{ + int baud_rate; + unsigned cflag, cval, scval, prev_mode; + int i, bits, sbits, idx; + unsigned long flags; + struct serial_state *state; + volatile struct smc_regs *smcp; + volatile struct scc_regs *sccp; + + if (!info->port.tty || !info->port.tty->termios) + return; + cflag = info->port.tty->termios->c_cflag; + + state = info->state; + + /* Character length programmed into the mode register is the + * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, + * 1 or 2 stop bits, minus 1. + * The value 'bits' counts this for us. + */ + cval = 0; + scval = 0; + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: bits = 5; break; + case CS6: bits = 6; break; + case CS7: bits = 7; break; + case CS8: bits = 8; break; + /* Never happens, but GCC is too dumb to figure it out */ + default: bits = 8; break; + } + sbits = bits - 5; + + if (cflag & CSTOPB) { + cval |= SMCMR_SL; /* Two stops */ + scval |= SCU_PMSR_SL; + bits++; + } + if (cflag & PARENB) { + cval |= SMCMR_PEN; + scval |= SCU_PMSR_PEN; + bits++; + } + if (!(cflag & PARODD)) { + cval |= SMCMR_PM_EVEN; + scval |= (SCU_PMSR_REVP | SCU_PMSR_TEVP); + } + + /* Determine divisor based on baud rate */ + i = cflag & CBAUD; + if (i >= (sizeof(baud_table)/sizeof(int))) + baud_rate = 9600; + else + baud_rate = baud_table[i]; + + info->timeout = (TX_BUF_SIZE*HZ*bits); + info->timeout += HZ/50; /* Add .02 seconds of slop */ + +#ifdef modem_control + /* CTS flow control flag and modem status interrupts */ + info->IER &= ~UART_IER_MSI; + if (info->flags & ASYNC_HARDPPS_CD) + info->IER |= UART_IER_MSI; + if (cflag & CRTSCTS) { + info->flags |= ASYNC_CTS_FLOW; + info->IER |= UART_IER_MSI; + } else + info->flags &= ~ASYNC_CTS_FLOW; + if (cflag & CLOCAL) + info->flags &= ~ASYNC_CHECK_CD; + else { + info->flags |= ASYNC_CHECK_CD; + info->IER |= UART_IER_MSI; + } + serial_out(info, UART_IER, info->IER); +#endif + + /* + * Set up parity check flag + */ + info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV); + if (I_INPCK(info->port.tty)) + info->read_status_mask |= BD_SC_FR | BD_SC_PR; + if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + info->read_status_mask |= BD_SC_BR; + + /* + * Characters to ignore + */ + info->ignore_status_mask = 0; + if (I_IGNPAR(info->port.tty)) + info->ignore_status_mask |= BD_SC_PR | BD_SC_FR; + if (I_IGNBRK(info->port.tty)) { + info->ignore_status_mask |= BD_SC_BR; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(info->port.tty)) + info->ignore_status_mask |= BD_SC_OV; + } + /* + * !!! ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + info->read_status_mask &= ~BD_SC_EMPTY; + local_irq_save(flags); + + /* Start bit has not been added (so don't, because we would just + * subtract it later), and we need to add one for the number of + * stops bits (there is always at least one). + */ + bits++; + idx = PORT_NUM(state->smc_scc_num); + if (state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + sccp->scc_psmr = (sbits << 12) | scval; + } else { + smcp = &pquicc->smc_regs[idx]; + + /* Set the mode register. We want to keep a copy of the + * enables, because we want to put them back if they were + * present. + */ + prev_mode = smcp->smc_smcmr; + smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART; + smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN)); + } + + m360_cpm_setbrg((state - rs_table), baud_rate); + + local_irq_restore(flags); +} + +static void rs_360_put_char(struct tty_struct *tty, unsigned char ch) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + volatile QUICC_BD *bdp; + + if (serial_paranoia_check(info, tty->name, "rs_put_char")) + return 0; + + if (!tty) + return 0; + + bdp = info->tx_cur; + while (bdp->status & BD_SC_READY); + + /* *((char *)__va(bdp->buf)) = ch; */ + *((char *)bdp->buf) = ch; + bdp->length = 1; + bdp->status |= BD_SC_READY; + + /* Get next BD. + */ + if (bdp->status & BD_SC_WRAP) + bdp = info->tx_bd_base; + else + bdp++; + + info->tx_cur = (QUICC_BD *)bdp; + return 1; + +} + +static int rs_360_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + int c, ret = 0; + ser_info_t *info = (ser_info_t *)tty->driver_data; + volatile QUICC_BD *bdp; + +#ifdef CONFIG_KGDB + /* Try to let stub handle output. Returns true if it did. */ + if (kgdb_output_string(buf, count)) + return ret; +#endif + + if (serial_paranoia_check(info, tty->name, "rs_write")) + return 0; + + if (!tty) + return 0; + + bdp = info->tx_cur; + + while (1) { + c = min(count, TX_BUF_SIZE); + + if (c <= 0) + break; + + if (bdp->status & BD_SC_READY) { + info->flags |= TX_WAKEUP; + break; + } + + /* memcpy(__va(bdp->buf), buf, c); */ + memcpy((void *)bdp->buf, buf, c); + + bdp->length = c; + bdp->status |= BD_SC_READY; + + buf += c; + count -= c; + ret += c; + + /* Get next BD. + */ + if (bdp->status & BD_SC_WRAP) + bdp = info->tx_bd_base; + else + bdp++; + info->tx_cur = (QUICC_BD *)bdp; + } + return ret; +} + +static int rs_360_write_room(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + int ret; + + if (serial_paranoia_check(info, tty->name, "rs_write_room")) + return 0; + + if ((info->tx_cur->status & BD_SC_READY) == 0) { + info->flags &= ~TX_WAKEUP; + ret = TX_BUF_SIZE; + } + else { + info->flags |= TX_WAKEUP; + ret = 0; + } + return ret; +} + +/* I could track this with transmit counters....maybe later. +*/ +static int rs_360_chars_in_buffer(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) + return 0; + return 0; +} + +static void rs_360_flush_buffer(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) + return; + + /* There is nothing to "flush", whatever we gave the CPM + * is on its way out. + */ + tty_wakeup(tty); + info->flags &= ~TX_WAKEUP; +} + +/* + * This function is used to send a high-priority XON/XOFF character to + * the device + */ +static void rs_360_send_xchar(struct tty_struct *tty, char ch) +{ + volatile QUICC_BD *bdp; + + ser_info_t *info = (ser_info_t *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_send_char")) + return; + + bdp = info->tx_cur; + while (bdp->status & BD_SC_READY); + + /* *((char *)__va(bdp->buf)) = ch; */ + *((char *)bdp->buf) = ch; + bdp->length = 1; + bdp->status |= BD_SC_READY; + + /* Get next BD. + */ + if (bdp->status & BD_SC_WRAP) + bdp = info->tx_bd_base; + else + bdp++; + + info->tx_cur = (QUICC_BD *)bdp; +} + +/* + * ------------------------------------------------------------ + * rs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void rs_360_throttle(struct tty_struct * tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("throttle %s: %d....\n", _tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "rs_throttle")) + return; + + if (I_IXOFF(tty)) + rs_360_send_xchar(tty, STOP_CHAR(tty)); + +#ifdef modem_control + if (tty->termios->c_cflag & CRTSCTS) + info->MCR &= ~UART_MCR_RTS; + + local_irq_disable(); + serial_out(info, UART_MCR, info->MCR); + local_irq_enable(); +#endif +} + +static void rs_360_unthrottle(struct tty_struct * tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("unthrottle %s: %d....\n", _tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + rs_360_send_xchar(tty, START_CHAR(tty)); + } +#ifdef modem_control + if (tty->termios->c_cflag & CRTSCTS) + info->MCR |= UART_MCR_RTS; + local_irq_disable(); + serial_out(info, UART_MCR, info->MCR); + local_irq_enable(); +#endif +} + +/* + * ------------------------------------------------------------ + * rs_ioctl() and friends + * ------------------------------------------------------------ + */ + +#ifdef maybe +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct async_struct * info, unsigned int *value) +{ + unsigned char status; + unsigned int result; + + local_irq_disable(); + status = serial_in(info, UART_LSR); + local_irq_enable(); + result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); + return put_user(result,value); +} +#endif + +static int rs_360_tiocmget(struct tty_struct *tty, struct file *file) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + unsigned int result = 0; +#ifdef modem_control + unsigned char control, status; + + if (serial_paranoia_check(info, tty->name, __func__)) + return -ENODEV; + + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + control = info->MCR; + local_irq_disable(); + status = serial_in(info, UART_MSR); + local_irq_enable(); + result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) + | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) +#ifdef TIOCM_OUT1 + | ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0) + | ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0) +#endif + | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) + | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) + | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) + | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); +#endif + return result; +} + +static int rs_360_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ +#ifdef modem_control + ser_info_t *info = (ser_info_t *)tty->driver_data; + unsigned int arg; + + if (serial_paranoia_check(info, tty->name, __func__)) + return -ENODEV; + + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + /* FIXME: locking on info->mcr */ + if (set & TIOCM_RTS) + info->mcr |= UART_MCR_RTS; + if (set & TIOCM_DTR) + info->mcr |= UART_MCR_DTR; + if (clear & TIOCM_RTS) + info->MCR &= ~UART_MCR_RTS; + if (clear & TIOCM_DTR) + info->MCR &= ~UART_MCR_DTR; + +#ifdef TIOCM_OUT1 + if (set & TIOCM_OUT1) + info->MCR |= UART_MCR_OUT1; + if (set & TIOCM_OUT2) + info->MCR |= UART_MCR_OUT2; + if (clear & TIOCM_OUT1) + info->MCR &= ~UART_MCR_OUT1; + if (clear & TIOCM_OUT2) + info->MCR &= ~UART_MCR_OUT2; +#endif + + local_irq_disable(); + serial_out(info, UART_MCR, info->MCR); + local_irq_enable(); +#endif + return 0; +} + +/* Sending a break is a two step process on the SMC/SCC. It is accomplished + * by sending a STOP TRANSMIT command followed by a RESTART TRANSMIT + * command. We take advantage of the begin/end functions to make this + * happen. + */ +static ushort smc_chan_map[] = { + CPM_CR_CH_SMC1, + CPM_CR_CH_SMC2 +}; + +static ushort scc_chan_map[] = { + CPM_CR_CH_SCC1, + CPM_CR_CH_SCC2, + CPM_CR_CH_SCC3, + CPM_CR_CH_SCC4 +}; + +static void begin_break(ser_info_t *info) +{ + volatile QUICC *cp; + ushort chan; + int idx; + + cp = pquicc; + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) + chan = scc_chan_map[idx]; + else + chan = smc_chan_map[idx]; + + cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; + while (cp->cp_cr & CPM_CR_FLG); +} + +static void end_break(ser_info_t *info) +{ + volatile QUICC *cp; + ushort chan; + int idx; + + cp = pquicc; + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) + chan = scc_chan_map[idx]; + else + chan = smc_chan_map[idx]; + + cp->cp_cr = mk_cr_cmd(chan, CPM_CR_RESTART_TX) | CPM_CR_FLG; + while (cp->cp_cr & CPM_CR_FLG); +} + +/* + * This routine sends a break character out the serial port. + */ +static void send_break(ser_info_t *info, unsigned int duration) +{ +#ifdef SERIAL_DEBUG_SEND_BREAK + printk("rs_send_break(%d) jiff=%lu...", duration, jiffies); +#endif + begin_break(info); + msleep_interruptible(duration); + end_break(info); +#ifdef SERIAL_DEBUG_SEND_BREAK + printk("done jiffies=%lu\n", jiffies); +#endif +} + + +/* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ +static int rs_360_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + struct async_icount cnow; + + local_irq_disable(); + cnow = info->state->icount; + local_irq_enable(); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + + return 0; +} + +static int rs_360_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + int error; + ser_info_t *info = (ser_info_t *)tty->driver_data; + int retval; + struct async_icount cnow; + /* struct async_icount_24 cnow;*/ /* kernel counter temps */ + struct serial_icounter_struct *p_cuser; /* user space */ + + if (serial_paranoia_check(info, tty->name, "rs_ioctl")) + return -ENODEV; + + if (cmd != TIOCMIWAIT) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TCSBRK: /* SVID version: non-zero arg --> no break */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + if (signal_pending(current)) + return -EINTR; + if (!arg) { + send_break(info, 250); /* 1/4 second */ + if (signal_pending(current)) + return -EINTR; + } + return 0; + case TCSBRKP: /* support for POSIX tcsendbreak() */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + if (signal_pending(current)) + return -EINTR; + send_break(info, arg ? arg*100 : 250); + if (signal_pending(current)) + return -EINTR; + return 0; + case TIOCSBRK: + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + begin_break(info); + return 0; + case TIOCCBRK: + retval = tty_check_change(tty); + if (retval) + return retval; + end_break(info); + return 0; +#ifdef maybe + case TIOCSERGETLSR: /* Get line status register */ + return get_lsr_info(info, (unsigned int *) arg); +#endif + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: +#ifdef modem_control + local_irq_disable(); + /* note the counters on entry */ + cprev = info->state->icount; + local_irq_enable(); + while (1) { + interruptible_sleep_on(&info->delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + local_irq_disable(); + cnow = info->state->icount; /* atomic copy */ + local_irq_enable(); + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) + return -EIO; /* no change => error */ + if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { + return 0; + } + cprev = cnow; + } + /* NOTREACHED */ +#else + return 0; +#endif + + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +/* FIX UP modem control here someday...... +*/ +static void rs_360_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + + change_speed(info); + +#ifdef modem_control + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && + !(tty->termios->c_cflag & CBAUD)) { + info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS); + local_irq_disable(); + serial_out(info, UART_MCR, info->MCR); + local_irq_enable(); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && + (tty->termios->c_cflag & CBAUD)) { + info->MCR |= UART_MCR_DTR; + if (!tty->hw_stopped || + !(tty->termios->c_cflag & CRTSCTS)) { + info->MCR |= UART_MCR_RTS; + } + local_irq_disable(); + serial_out(info, UART_MCR, info->MCR); + local_irq_enable(); + } + + /* Handle turning off CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + rs_360_start(tty); + } +#endif + +#if 0 + /* + * No need to wake up processes in open wait, since they + * sample the CLOCAL flag once, and don't recheck it. + * XXX It's not clear whether the current behavior is correct + * or not. Hence, this may change..... + */ + if (!(old_termios->c_cflag & CLOCAL) && + (tty->termios->c_cflag & CLOCAL)) + wake_up_interruptible(&info->open_wait); +#endif +} + +/* + * ------------------------------------------------------------ + * rs_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * async structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void rs_360_close(struct tty_struct *tty, struct file * filp) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + /* struct async_state *state; */ + struct serial_state *state; + unsigned long flags; + int idx; + volatile struct smc_regs *smcp; + volatile struct scc_regs *sccp; + + if (!info || serial_paranoia_check(info, tty->name, "rs_close")) + return; + + state = info->state; + + local_irq_save(flags); + + if (tty_hung_up_p(filp)) { + DBG_CNT("before DEC-hung"); + local_irq_restore(flags); + return; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("rs_close ttys%d, count = %d\n", info->line, state->count); +#endif + if ((tty->count == 1) && (state->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. state->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk("rs_close: bad serial port count; tty->count is 1, " + "state->count is %d\n", state->count); + state->count = 1; + } + if (--state->count < 0) { + printk("rs_close: bad serial port count for ttys%d: %d\n", + info->line, state->count); + state->count = 0; + } + if (state->count) { + DBG_CNT("before DEC-2"); + local_irq_restore(flags); + return; + } + info->flags |= ASYNC_CLOSING; + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, info->closing_wait); + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + info->read_status_mask &= ~BD_SC_EMPTY; + if (info->flags & ASYNC_INITIALIZED) { + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + sccp->scc_sccm &= ~UART_SCCM_RX; + sccp->scc_gsmr.w.low &= ~SCC_GSMRL_ENR; + } else { + smcp = &pquicc->smc_regs[idx]; + smcp->smc_smcm &= ~SMCM_RX; + smcp->smc_smcmr &= ~SMCMR_REN; + } + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + rs_360_wait_until_sent(tty, info->timeout); + } + shutdown(info); + rs_360_flush_buffer(tty); + tty_ldisc_flush(tty); + tty->closing = 0; + info->event = 0; + info->port.tty = NULL; + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs(info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); + local_irq_restore(flags); +} + +/* + * rs_wait_until_sent() --- wait until the transmitter is empty + */ +static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + unsigned long orig_jiffies, char_time; + /*int lsr;*/ + volatile QUICC_BD *bdp; + + if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent")) + return; + +#ifdef maybe + if (info->state->type == PORT_UNKNOWN) + return; +#endif + + orig_jiffies = jiffies; + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + char_time = 1; + if (timeout) + char_time = min(char_time, (unsigned long)timeout); +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time); + printk("jiff=%lu...", jiffies); +#endif + + /* We go through the loop at least once because we can't tell + * exactly when the last character exits the shifter. There can + * be at least two characters waiting to be sent after the buffers + * are empty. + */ + do { +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("lsr = %d (jiff=%lu)...", lsr, jiffies); +#endif +/* current->counter = 0; make us low-priority */ + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && (time_after(jiffies, orig_jiffies + timeout))) + break; + /* The 'tx_cur' is really the next buffer to send. We + * have to back up to the previous BD and wait for it + * to go. This isn't perfect, because all this indicates + * is the buffer is available. There are still characters + * in the CPM FIFO. + */ + bdp = info->tx_cur; + if (bdp == info->tx_bd_base) + bdp += (TX_NUM_FIFO-1); + else + bdp--; + } while (bdp->status & BD_SC_READY); + current->state = TASK_RUNNING; +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); +#endif +} + +/* + * rs_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +static void rs_360_hangup(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + struct serial_state *state = info->state; + + if (serial_paranoia_check(info, tty->name, "rs_hangup")) + return; + + state = info->state; + + rs_360_flush_buffer(tty); + shutdown(info); + info->event = 0; + state->count = 0; + info->flags &= ~ASYNC_NORMAL_ACTIVE; + info->port.tty = NULL; + wake_up_interruptible(&info->open_wait); +} + +/* + * ------------------------------------------------------------ + * rs_open() and friends + * ------------------------------------------------------------ + */ +static int block_til_ready(struct tty_struct *tty, struct file * filp, + ser_info_t *info) +{ +#ifdef DO_THIS_LATER + DECLARE_WAITQUEUE(wait, current); +#endif + struct serial_state *state = info->state; + int retval; + int do_clocal = 0; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + if (info->flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->close_wait); +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; +#else + return -EAGAIN; +#endif + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + * If this is an SMC port, we don't have modem control to wait + * for, so just get out here. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR)) || + !(info->state->smc_scc_num & NUM_IS_SCC)) { + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, state->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; +#ifdef DO_THIS_LATER + add_wait_queue(&info->open_wait, &wait); +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready before block: ttys%d, count = %d\n", + state->line, state->count); +#endif + local_irq_disable(); + if (!tty_hung_up_p(filp)) + state->count--; + local_irq_enable(); + info->blocked_open++; + while (1) { + local_irq_disable(); + if (tty->termios->c_cflag & CBAUD) + serial_out(info, UART_MCR, + serial_inp(info, UART_MCR) | + (UART_MCR_DTR | UART_MCR_RTS)); + local_irq_enable(); + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || + !(info->flags & ASYNC_INITIALIZED)) { +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; +#else + retval = -EAGAIN; +#endif + break; + } + if (!(info->flags & ASYNC_CLOSING) && + (do_clocal || (serial_in(info, UART_MSR) & + UART_MSR_DCD))) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready blocking: ttys%d, count = %d\n", + info->line, state->count); +#endif + tty_unlock(); + schedule(); + tty_lock(); + } + current->state = TASK_RUNNING; + remove_wait_queue(&info->open_wait, &wait); + if (!tty_hung_up_p(filp)) + state->count++; + info->blocked_open--; +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready after blocking: ttys%d, count = %d\n", + info->line, state->count); +#endif +#endif /* DO_THIS_LATER */ + if (retval) + return retval; + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; +} + +static int get_async_struct(int line, ser_info_t **ret_info) +{ + struct serial_state *sstate; + + sstate = rs_table + line; + if (sstate->info) { + sstate->count++; + *ret_info = (ser_info_t *)sstate->info; + return 0; + } + else { + return -ENOMEM; + } +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its async structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +static int rs_360_open(struct tty_struct *tty, struct file * filp) +{ + ser_info_t *info; + int retval, line; + + line = tty->index; + if ((line < 0) || (line >= NR_PORTS)) + return -ENODEV; + retval = get_async_struct(line, &info); + if (retval) + return retval; + if (serial_paranoia_check(info, tty->name, "rs_open")) + return -ENODEV; + +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open %s, count = %d\n", tty->name, info->state->count); +#endif + tty->driver_data = info; + info->port.tty = tty; + + /* + * Start up serial port + */ + retval = startup(info); + if (retval) + return retval; + + retval = block_til_ready(tty, filp, info); + if (retval) { +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open returning after block_til_ready with %d\n", + retval); +#endif + return retval; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open %s successful...", tty->name); +#endif + return 0; +} + +/* + * /proc fs routines.... + */ + +static inline int line_info(char *buf, struct serial_state *state) +{ +#ifdef notdef + struct async_struct *info = state->info, scr_info; + char stat_buf[30], control, status; +#endif + int ret; + + ret = sprintf(buf, "%d: uart:%s port:%X irq:%d", + state->line, + (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC", + (unsigned int)(state->port), state->irq); + + if (!state->port || (state->type == PORT_UNKNOWN)) { + ret += sprintf(buf+ret, "\n"); + return ret; + } + +#ifdef notdef + /* + * Figure out the current RS-232 lines + */ + if (!info) { + info = &scr_info; /* This is just for serial_{in,out} */ + + info->magic = SERIAL_MAGIC; + info->port = state->port; + info->flags = state->flags; + info->quot = 0; + info->port.tty = NULL; + } + local_irq_disable(); + status = serial_in(info, UART_MSR); + control = info ? info->MCR : serial_in(info, UART_MCR); + local_irq_enable(); + + stat_buf[0] = 0; + stat_buf[1] = 0; + if (control & UART_MCR_RTS) + strcat(stat_buf, "|RTS"); + if (status & UART_MSR_CTS) + strcat(stat_buf, "|CTS"); + if (control & UART_MCR_DTR) + strcat(stat_buf, "|DTR"); + if (status & UART_MSR_DSR) + strcat(stat_buf, "|DSR"); + if (status & UART_MSR_DCD) + strcat(stat_buf, "|CD"); + if (status & UART_MSR_RI) + strcat(stat_buf, "|RI"); + + if (info->quot) { + ret += sprintf(buf+ret, " baud:%d", + state->baud_base / info->quot); + } + + ret += sprintf(buf+ret, " tx:%d rx:%d", + state->icount.tx, state->icount.rx); + + if (state->icount.frame) + ret += sprintf(buf+ret, " fe:%d", state->icount.frame); + + if (state->icount.parity) + ret += sprintf(buf+ret, " pe:%d", state->icount.parity); + + if (state->icount.brk) + ret += sprintf(buf+ret, " brk:%d", state->icount.brk); + + if (state->icount.overrun) + ret += sprintf(buf+ret, " oe:%d", state->icount.overrun); + + /* + * Last thing is the RS-232 status lines + */ + ret += sprintf(buf+ret, " %s\n", stat_buf+1); +#endif + return ret; +} + +int rs_360_read_proc(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + int i, len = 0; + off_t begin = 0; + + len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version); + for (i = 0; i < NR_PORTS && len < 4000; i++) { + len += line_info(page + len, &rs_table[i]); + if (len+begin > off+count) + goto done; + if (len+begin < off) { + begin += len; + len = 0; + } + } + *eof = 1; +done: + if (off >= len+begin) + return 0; + *start = page + (begin-off); + return ((count < begin+len-off) ? count : begin+len-off); +} + +/* + * --------------------------------------------------------------------- + * rs_init() and friends + * + * rs_init() is called at boot-time to initialize the serial driver. + * --------------------------------------------------------------------- + */ + +/* + * This routine prints out the appropriate serial driver version + * number, and identifies which options were configured into this + * driver. + */ +static _INLINE_ void show_serial_version(void) +{ + printk(KERN_INFO "%s version %s\n", serial_name, serial_version); +} + + +/* + * The serial console driver used during boot. Note that these names + * clash with those found in "serial.c", so we currently can't support + * the 16xxx uarts and these at the same time. I will fix this to become + * an indirect function call from tty_io.c (or something). + */ + +#ifdef CONFIG_SERIAL_CONSOLE + +/* + * Print a string to the serial port trying not to disturb any possible + * real use of the port... + */ +static void my_console_write(int idx, const char *s, + unsigned count) +{ + struct serial_state *ser; + ser_info_t *info; + unsigned i; + QUICC_BD *bdp, *bdbase; + volatile struct smc_uart_pram *up; + volatile u_char *cp; + + ser = rs_table + idx; + + + /* If the port has been initialized for general use, we have + * to use the buffer descriptors allocated there. Otherwise, + * we simply use the single buffer allocated. + */ + if ((info = (ser_info_t *)ser->info) != NULL) { + bdp = info->tx_cur; + bdbase = info->tx_bd_base; + } + else { + /* Pointer to UART in parameter ram. + */ + /* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */ + up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u; + + /* Get the address of the host memory buffer. + */ + bdp = bdbase = (QUICC_BD *)((uint)pquicc + (uint)up->tbase); + } + + /* + * We need to gracefully shut down the transmitter, disable + * interrupts, then send our bytes out. + */ + + /* + * Now, do each character. This is not as bad as it looks + * since this is a holding FIFO and not a transmitting FIFO. + * We could add the complexity of filling the entire transmit + * buffer, but we would just wait longer between accesses...... + */ + for (i = 0; i < count; i++, s++) { + /* Wait for transmitter fifo to empty. + * Ready indicates output is ready, and xmt is doing + * that, not that it is ready for us to send. + */ + while (bdp->status & BD_SC_READY); + + /* Send the character out. + */ + cp = bdp->buf; + *cp = *s; + + bdp->length = 1; + bdp->status |= BD_SC_READY; + + if (bdp->status & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + + /* if a LF, also do CR... */ + if (*s == 10) { + while (bdp->status & BD_SC_READY); + /* cp = __va(bdp->buf); */ + cp = bdp->buf; + *cp = 13; + bdp->length = 1; + bdp->status |= BD_SC_READY; + + if (bdp->status & BD_SC_WRAP) { + bdp = bdbase; + } + else { + bdp++; + } + } + } + + /* + * Finally, Wait for transmitter & holding register to empty + * and restore the IER + */ + while (bdp->status & BD_SC_READY); + + if (info) + info->tx_cur = (QUICC_BD *)bdp; +} + +static void serial_console_write(struct console *c, const char *s, + unsigned count) +{ +#ifdef CONFIG_KGDB + /* Try to let stub handle output. Returns true if it did. */ + if (kgdb_output_string(s, count)) + return; +#endif + my_console_write(c->index, s, count); +} + + + +/*void console_print_68360(const char *p) +{ + const char *cp = p; + int i; + + for (i=0;cp[i]!=0;i++); + + serial_console_write (p, i); + + //Comment this if you want to have a strict interrupt-driven output + //rs_fair_output(); + + return; +}*/ + + + + + + +#ifdef CONFIG_XMON +int +xmon_360_write(const char *s, unsigned count) +{ + my_console_write(0, s, count); + return(count); +} +#endif + +#ifdef CONFIG_KGDB +void +putDebugChar(char ch) +{ + my_console_write(0, &ch, 1); +} +#endif + +/* + * Receive character from the serial port. This only works well + * before the port is initialized for real use. + */ +static int my_console_wait_key(int idx, int xmon, char *obuf) +{ + struct serial_state *ser; + u_char c, *cp; + ser_info_t *info; + QUICC_BD *bdp; + volatile struct smc_uart_pram *up; + int i; + + ser = rs_table + idx; + + /* Get the address of the host memory buffer. + * If the port has been initialized for general use, we must + * use information from the port structure. + */ + if ((info = (ser_info_t *)ser->info)) + bdp = info->rx_cur; + else + /* bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; */ + bdp = (QUICC_BD *)((uint)pquicc + (uint)up->tbase); + + /* Pointer to UART in parameter ram. + */ + /* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */ + up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; + + /* + * We need to gracefully shut down the receiver, disable + * interrupts, then read the input. + * XMON just wants a poll. If no character, return -1, else + * return the character. + */ + if (!xmon) { + while (bdp->status & BD_SC_EMPTY); + } + else { + if (bdp->status & BD_SC_EMPTY) + return -1; + } + + cp = (char *)bdp->buf; + + if (obuf) { + i = c = bdp->length; + while (i-- > 0) + *obuf++ = *cp++; + } + else { + c = *cp; + } + bdp->status |= BD_SC_EMPTY; + + if (info) { + if (bdp->status & BD_SC_WRAP) { + bdp = info->rx_bd_base; + } + else { + bdp++; + } + info->rx_cur = (QUICC_BD *)bdp; + } + + return((int)c); +} + +static int serial_console_wait_key(struct console *co) +{ + return(my_console_wait_key(co->index, 0, NULL)); +} + +#ifdef CONFIG_XMON +int +xmon_360_read_poll(void) +{ + return(my_console_wait_key(0, 1, NULL)); +} + +int +xmon_360_read_char(void) +{ + return(my_console_wait_key(0, 0, NULL)); +} +#endif + +#ifdef CONFIG_KGDB +static char kgdb_buf[RX_BUF_SIZE], *kgdp; +static int kgdb_chars; + +unsigned char +getDebugChar(void) +{ + if (kgdb_chars <= 0) { + kgdb_chars = my_console_wait_key(0, 0, kgdb_buf); + kgdp = kgdb_buf; + } + kgdb_chars--; + + return(*kgdp++); +} + +void kgdb_interruptible(int state) +{ +} +void kgdb_map_scc(void) +{ + struct serial_state *ser; + uint mem_addr; + volatile QUICC_BD *bdp; + volatile smc_uart_t *up; + + cpmp = (cpm360_t *)&(((immap_t *)IMAP_ADDR)->im_cpm); + + /* To avoid data cache CPM DMA coherency problems, allocate a + * buffer in the CPM DPRAM. This will work until the CPM and + * serial ports are initialized. At that time a memory buffer + * will be allocated. + * The port is already initialized from the boot procedure, all + * we do here is give it a different buffer and make it a FIFO. + */ + + ser = rs_table; + + /* Right now, assume we are using SMCs. + */ + up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; + + /* Allocate space for an input FIFO, plus a few bytes for output. + * Allocate bytes to maintain word alignment. + */ + mem_addr = (uint)(&cpmp->cp_dpmem[0x1000]); + + /* Set the physical address of the host memory buffers in + * the buffer descriptors. + */ + bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; + bdp->buf = mem_addr; + + bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_tbase]; + bdp->buf = mem_addr+RX_BUF_SIZE; + + up->smc_mrblr = RX_BUF_SIZE; /* receive buffer length */ + up->smc_maxidl = RX_BUF_SIZE; +} +#endif + +static struct tty_struct *serial_console_device(struct console *c, int *index) +{ + *index = c->index; + return serial_driver; +} + + +struct console sercons = { + .name = "ttyS", + .write = serial_console_write, + .device = serial_console_device, + .wait_key = serial_console_wait_key, + .setup = serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = CONFIG_SERIAL_CONSOLE_PORT, +}; + + + +/* + * Register console. + */ +long console_360_init(long kmem_start, long kmem_end) +{ + register_console(&sercons); + /*register_console (console_print_68360); - 2.0.38 only required a write + function pointer. */ + return kmem_start; +} + +#endif + +/* Index in baud rate table of the default console baud rate. +*/ +static int baud_idx; + +static const struct tty_operations rs_360_ops = { + .owner = THIS_MODULE, + .open = rs_360_open, + .close = rs_360_close, + .write = rs_360_write, + .put_char = rs_360_put_char, + .write_room = rs_360_write_room, + .chars_in_buffer = rs_360_chars_in_buffer, + .flush_buffer = rs_360_flush_buffer, + .ioctl = rs_360_ioctl, + .throttle = rs_360_throttle, + .unthrottle = rs_360_unthrottle, + /* .send_xchar = rs_360_send_xchar, */ + .set_termios = rs_360_set_termios, + .stop = rs_360_stop, + .start = rs_360_start, + .hangup = rs_360_hangup, + /* .wait_until_sent = rs_360_wait_until_sent, */ + /* .read_proc = rs_360_read_proc, */ + .tiocmget = rs_360_tiocmget, + .tiocmset = rs_360_tiocmset, +}; + +static int __init rs_360_init(void) +{ + struct serial_state * state; + ser_info_t *info; + void *mem_addr; + uint dp_addr, iobits; + int i, j, idx; + ushort chan; + QUICC_BD *bdp; + volatile QUICC *cp; + volatile struct smc_regs *sp; + volatile struct smc_uart_pram *up; + volatile struct scc_regs *scp; + volatile struct uart_pram *sup; + /* volatile immap_t *immap; */ + + serial_driver = alloc_tty_driver(NR_PORTS); + if (!serial_driver) + return -1; + + show_serial_version(); + + serial_driver->name = "ttyS"; + serial_driver->major = TTY_MAJOR; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + baud_idx | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &rs_360_ops); + + if (tty_register_driver(serial_driver)) + panic("Couldn't register serial driver\n"); + + cp = pquicc; /* Get pointer to Communication Processor */ + /* immap = (immap_t *)IMAP_ADDR; */ /* and to internal registers */ + + + /* Configure SCC2, SCC3, and SCC4 instead of port A parallel I/O. + */ + /* The "standard" configuration through the 860. + */ +/* immap->im_ioport.iop_papar |= 0x00fc; */ +/* immap->im_ioport.iop_padir &= ~0x00fc; */ +/* immap->im_ioport.iop_paodr &= ~0x00fc; */ + cp->pio_papar |= 0x00fc; + cp->pio_padir &= ~0x00fc; + /* cp->pio_paodr &= ~0x00fc; */ + + + /* Since we don't yet do modem control, connect the port C pins + * as general purpose I/O. This will assert CTS and CD for the + * SCC ports. + */ + /* FIXME: see 360um p.7-365 and 860um p.34-12 + * I can't make sense of these bits - mleslie*/ +/* immap->im_ioport.iop_pcdir |= 0x03c6; */ +/* immap->im_ioport.iop_pcpar &= ~0x03c6; */ + +/* cp->pio_pcdir |= 0x03c6; */ +/* cp->pio_pcpar &= ~0x03c6; */ + + + + /* Connect SCC2 and SCC3 to NMSI. Connect BRG3 to SCC2 and + * BRG4 to SCC3. + */ + cp->si_sicr &= ~0x00ffff00; + cp->si_sicr |= 0x001b1200; + +#ifdef CONFIG_PP04 + /* Frequentis PP04 forced to RS-232 until we know better. + * Port C 12 and 13 low enables RS-232 on SCC3 and SCC4. + */ + immap->im_ioport.iop_pcdir |= 0x000c; + immap->im_ioport.iop_pcpar &= ~0x000c; + immap->im_ioport.iop_pcdat &= ~0x000c; + + /* This enables the TX driver. + */ + cp->cp_pbpar &= ~0x6000; + cp->cp_pbdat &= ~0x6000; +#endif + + for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) { + state->magic = SSTATE_MAGIC; + state->line = i; + state->type = PORT_UNKNOWN; + state->custom_divisor = 0; + state->close_delay = 5*HZ/10; + state->closing_wait = 30*HZ; + state->icount.cts = state->icount.dsr = + state->icount.rng = state->icount.dcd = 0; + state->icount.rx = state->icount.tx = 0; + state->icount.frame = state->icount.parity = 0; + state->icount.overrun = state->icount.brk = 0; + printk(KERN_INFO "ttyS%d at irq 0x%02x is an %s\n", + i, (unsigned int)(state->irq), + (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC"); + +#ifdef CONFIG_SERIAL_CONSOLE + /* If we just printed the message on the console port, and + * we are about to initialize it for general use, we have + * to wait a couple of character times for the CR/NL to + * make it out of the transmit buffer. + */ + if (i == CONFIG_SERIAL_CONSOLE_PORT) + mdelay(8); + + +/* idx = PORT_NUM(info->state->smc_scc_num); */ +/* if (info->state->smc_scc_num & NUM_IS_SCC) */ +/* chan = scc_chan_map[idx]; */ +/* else */ +/* chan = smc_chan_map[idx]; */ + +/* cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; */ +/* while (cp->cp_cr & CPM_CR_FLG); */ + +#endif + /* info = kmalloc(sizeof(ser_info_t), GFP_KERNEL); */ + info = &quicc_ser_info[i]; + if (info) { + memset (info, 0, sizeof(ser_info_t)); + info->magic = SERIAL_MAGIC; + info->line = i; + info->flags = state->flags; + INIT_WORK(&info->tqueue, do_softint, info); + INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + info->state = state; + state->info = (struct async_struct *)info; + + /* We need to allocate a transmit and receive buffer + * descriptors from dual port ram, and a character + * buffer area from host mem. + */ + dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * RX_NUM_FIFO); + + /* Allocate space for FIFOs in the host memory. + * (for now this is from a static array of buffers :( + */ + /* mem_addr = m360_cpm_hostalloc(RX_NUM_FIFO * RX_BUF_SIZE); */ + /* mem_addr = kmalloc (RX_NUM_FIFO * RX_BUF_SIZE, GFP_BUFFER); */ + mem_addr = &rx_buf_pool[i * RX_NUM_FIFO * RX_BUF_SIZE]; + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + bdp = (QUICC_BD *)((uint)pquicc + dp_addr); + info->rx_cur = info->rx_bd_base = bdp; + + /* initialize rx buffer descriptors */ + for (j=0; j<(RX_NUM_FIFO-1); j++) { + bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE]; + bdp->status = BD_SC_EMPTY | BD_SC_INTRPT; + mem_addr += RX_BUF_SIZE; + bdp++; + } + bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE]; + bdp->status = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT; + + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + +#if defined (CONFIG_UCQUICC) && 1 + /* set the transceiver mode to RS232 */ + sipex_mode_bits &= ~(uint)SIPEX_MODE(idx,0x0f); /* clear current mode */ + sipex_mode_bits |= (uint)SIPEX_MODE(idx,0x02); + *(uint *)_periph_base = sipex_mode_bits; + /* printk ("sipex bits = 0x%08x\n", sipex_mode_bits); */ +#endif + } + + dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * TX_NUM_FIFO); + + /* Allocate space for FIFOs in the host memory. + */ + /* mem_addr = m360_cpm_hostalloc(TX_NUM_FIFO * TX_BUF_SIZE); */ + /* mem_addr = kmalloc (TX_NUM_FIFO * TX_BUF_SIZE, GFP_BUFFER); */ + mem_addr = &tx_buf_pool[i * TX_NUM_FIFO * TX_BUF_SIZE]; + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + /* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */ + bdp = (QUICC_BD *)((uint)pquicc + dp_addr); + info->tx_cur = info->tx_bd_base = (QUICC_BD *)bdp; + + /* initialize tx buffer descriptors */ + for (j=0; j<(TX_NUM_FIFO-1); j++) { + bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE]; + bdp->status = BD_SC_INTRPT; + mem_addr += TX_BUF_SIZE; + bdp++; + } + bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE]; + bdp->status = (BD_SC_WRAP | BD_SC_INTRPT); + + if (info->state->smc_scc_num & NUM_IS_SCC) { + scp = &pquicc->scc_regs[idx]; + sup = &pquicc->pram[info->state->port].scc.pscc.u; + sup->rbase = dp_addr; + sup->tbase = dp_addr; + + /* Set up the uart parameters in the + * parameter ram. + */ + sup->rfcr = SMC_EB; + sup->tfcr = SMC_EB; + + /* Set this to 1 for now, so we get single + * character interrupts. Using idle character + * time requires some additional tuning. + */ + sup->mrblr = 1; + sup->max_idl = 0; + sup->brkcr = 1; + sup->parec = 0; + sup->frmer = 0; + sup->nosec = 0; + sup->brkec = 0; + sup->uaddr1 = 0; + sup->uaddr2 = 0; + sup->toseq = 0; + { + int i; + for (i=0;i<8;i++) + sup->cc[i] = 0x8000; + } + sup->rccm = 0xc0ff; + + /* Send the CPM an initialize command. + */ + chan = scc_chan_map[idx]; + + /* execute the INIT RX & TX PARAMS command for this channel. */ + cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; + while (cp->cp_cr & CPM_CR_FLG); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + scp->scc_gsmr.w.high = 0; + scp->scc_gsmr.w.low = + (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); + + /* Disable all interrupts and clear all pending + * events. + */ + scp->scc_sccm = 0; + scp->scc_scce = 0xffff; + scp->scc_dsr = 0x7e7e; + scp->scc_psmr = 0x3000; + + /* If the port is the console, enable Rx and Tx. + */ +#ifdef CONFIG_SERIAL_CONSOLE + if (i == CONFIG_SERIAL_CONSOLE_PORT) + scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + } + else { + /* Configure SMCs Tx/Rx instead of port B + * parallel I/O. + */ + up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; + up->rbase = dp_addr; + + iobits = 0xc0 << (idx * 4); + cp->pip_pbpar |= iobits; + cp->pip_pbdir &= ~iobits; + cp->pip_pbodr &= ~iobits; + + + /* Connect the baud rate generator to the + * SMC based upon index in rs_table. Also + * make sure it is connected to NMSI. + */ + cp->si_simode &= ~(0xffff << (idx * 16)); + cp->si_simode |= (i << ((idx * 16) + 12)); + + up->tbase = dp_addr; + + /* Set up the uart parameters in the + * parameter ram. + */ + up->rfcr = SMC_EB; + up->tfcr = SMC_EB; + + /* Set this to 1 for now, so we get single + * character interrupts. Using idle character + * time requires some additional tuning. + */ + up->mrblr = 1; + up->max_idl = 0; + up->brkcr = 1; + + /* Send the CPM an initialize command. + */ + chan = smc_chan_map[idx]; + + cp->cp_cr = mk_cr_cmd(chan, + CPM_CR_INIT_TRX) | CPM_CR_FLG; +#ifdef CONFIG_SERIAL_CONSOLE + if (i == CONFIG_SERIAL_CONSOLE_PORT) + printk(""); +#endif + while (cp->cp_cr & CPM_CR_FLG); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + sp = &cp->smc_regs[idx]; + sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; + + /* Disable all interrupts and clear all pending + * events. + */ + sp->smc_smcm = 0; + sp->smc_smce = 0xff; + + /* If the port is the console, enable Rx and Tx. + */ +#ifdef CONFIG_SERIAL_CONSOLE + if (i == CONFIG_SERIAL_CONSOLE_PORT) + sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; +#endif + } + + /* Install interrupt handler. + */ + /* cpm_install_handler(IRQ_MACHSPEC | state->irq, rs_360_interrupt, info); */ + /*request_irq(IRQ_MACHSPEC | state->irq, rs_360_interrupt, */ + request_irq(state->irq, rs_360_interrupt, + IRQ_FLG_LOCK, "ttyS", (void *)info); + + /* Set up the baud rate generator. + */ + m360_cpm_setbrg(i, baud_table[baud_idx]); + + } + } + + return 0; +} +module_init(rs_360_init); + +/* This must always be called before the rs_360_init() function, otherwise + * it blows away the port control information. + */ +//static int __init serial_console_setup( struct console *co, char *options) +int serial_console_setup( struct console *co, char *options) +{ + struct serial_state *ser; + uint mem_addr, dp_addr, bidx, idx, iobits; + ushort chan; + QUICC_BD *bdp; + volatile QUICC *cp; + volatile struct smc_regs *sp; + volatile struct scc_regs *scp; + volatile struct smc_uart_pram *up; + volatile struct uart_pram *sup; + +/* mleslie TODO: + * add something to the 68k bootloader to store a desired initial console baud rate */ + +/* bd_t *bd; */ /* a board info struct used by EPPC-bug */ +/* bd = (bd_t *)__res; */ + + for (bidx = 0; bidx < (sizeof(baud_table) / sizeof(int)); bidx++) + /* if (bd->bi_baudrate == baud_table[bidx]) */ + if (CONSOLE_BAUDRATE == baud_table[bidx]) + break; + + /* co->cflag = CREAD|CLOCAL|bidx|CS8; */ + baud_idx = bidx; + + ser = rs_table + CONFIG_SERIAL_CONSOLE_PORT; + + cp = pquicc; /* Get pointer to Communication Processor */ + + idx = PORT_NUM(ser->smc_scc_num); + if (ser->smc_scc_num & NUM_IS_SCC) { + + /* TODO: need to set up SCC pin assignment etc. here */ + + } + else { + iobits = 0xc0 << (idx * 4); + cp->pip_pbpar |= iobits; + cp->pip_pbdir &= ~iobits; + cp->pip_pbodr &= ~iobits; + + /* Connect the baud rate generator to the + * SMC based upon index in rs_table. Also + * make sure it is connected to NMSI. + */ + cp->si_simode &= ~(0xffff << (idx * 16)); + cp->si_simode |= (idx << ((idx * 16) + 12)); + } + + /* When we get here, the CPM has been reset, so we need + * to configure the port. + * We need to allocate a transmit and receive buffer descriptor + * from dual port ram, and a character buffer area from host mem. + */ + + /* Allocate space for two buffer descriptors in the DP ram. + */ + dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * CONSOLE_NUM_FIFO); + + /* Allocate space for two 2 byte FIFOs in the host memory. + */ + /* mem_addr = m360_cpm_hostalloc(8); */ + mem_addr = (uint)console_fifos; + + + /* Set the physical address of the host memory buffers in + * the buffer descriptors. + */ + /* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */ + bdp = (QUICC_BD *)((uint)pquicc + dp_addr); + bdp->buf = (char *)mem_addr; + (bdp+1)->buf = (char *)(mem_addr+4); + + /* For the receive, set empty and wrap. + * For transmit, set wrap. + */ + bdp->status = BD_SC_EMPTY | BD_SC_WRAP; + (bdp+1)->status = BD_SC_WRAP; + + /* Set up the uart parameters in the parameter ram. + */ + if (ser->smc_scc_num & NUM_IS_SCC) { + scp = &cp->scc_regs[idx]; + /* sup = (scc_uart_t *)&cp->cp_dparam[ser->port]; */ + sup = &pquicc->pram[ser->port].scc.pscc.u; + + sup->rbase = dp_addr; + sup->tbase = dp_addr + sizeof(QUICC_BD); + + /* Set up the uart parameters in the + * parameter ram. + */ + sup->rfcr = SMC_EB; + sup->tfcr = SMC_EB; + + /* Set this to 1 for now, so we get single + * character interrupts. Using idle character + * time requires some additional tuning. + */ + sup->mrblr = 1; + sup->max_idl = 0; + sup->brkcr = 1; + sup->parec = 0; + sup->frmer = 0; + sup->nosec = 0; + sup->brkec = 0; + sup->uaddr1 = 0; + sup->uaddr2 = 0; + sup->toseq = 0; + { + int i; + for (i=0;i<8;i++) + sup->cc[i] = 0x8000; + } + sup->rccm = 0xc0ff; + + /* Send the CPM an initialize command. + */ + chan = scc_chan_map[idx]; + + cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; + while (cp->cp_cr & CPM_CR_FLG); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + scp->scc_gsmr.w.high = 0; + scp->scc_gsmr.w.low = + (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); + + /* Disable all interrupts and clear all pending + * events. + */ + scp->scc_sccm = 0; + scp->scc_scce = 0xffff; + scp->scc_dsr = 0x7e7e; + scp->scc_psmr = 0x3000; + + scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); + + } + else { + /* up = (smc_uart_t *)&cp->cp_dparam[ser->port]; */ + up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u; + + up->rbase = dp_addr; /* Base of receive buffer desc. */ + up->tbase = dp_addr+sizeof(QUICC_BD); /* Base of xmt buffer desc. */ + up->rfcr = SMC_EB; + up->tfcr = SMC_EB; + + /* Set this to 1 for now, so we get single character interrupts. + */ + up->mrblr = 1; /* receive buffer length */ + up->max_idl = 0; /* wait forever for next char */ + + /* Send the CPM an initialize command. + */ + chan = smc_chan_map[idx]; + cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; + while (cp->cp_cr & CPM_CR_FLG); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + sp = &cp->smc_regs[idx]; + sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; + + /* And finally, enable Rx and Tx. + */ + sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; + } + + /* Set up the baud rate generator. + */ + /* m360_cpm_setbrg((ser - rs_table), bd->bi_baudrate); */ + m360_cpm_setbrg((ser - rs_table), CONSOLE_BAUDRATE); + + return 0; +} + +/* + * Local variables: + * c-indent-level: 4 + * c-basic-offset: 4 + * tab-width: 4 + * End: + */ diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c new file mode 100644 index 000000000000..b25e6e490530 --- /dev/null +++ b/drivers/tty/serial/8250.c @@ -0,0 +1,3377 @@ +/* + * linux/drivers/char/8250.c + * + * Driver for 8250/16550-type serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * A note about mapbase / membase + * + * mapbase is the physical address of the IO port. + * membase is an 'ioremapped' cookie. + */ + +#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "8250.h" + +#ifdef CONFIG_SPARC +#include "suncore.h" +#endif + +/* + * Configuration: + * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option + * is unsafe when used on edge-triggered interrupts. + */ +static unsigned int share_irqs = SERIAL8250_SHARE_IRQS; + +static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; + +static struct uart_driver serial8250_reg; + +static int serial_index(struct uart_port *port) +{ + return (serial8250_reg.minor - 64) + port->line; +} + +static unsigned int skip_txen_test; /* force skip of txen test at init time */ + +/* + * Debugging. + */ +#if 0 +#define DEBUG_AUTOCONF(fmt...) printk(fmt) +#else +#define DEBUG_AUTOCONF(fmt...) do { } while (0) +#endif + +#if 0 +#define DEBUG_INTR(fmt...) printk(fmt) +#else +#define DEBUG_INTR(fmt...) do { } while (0) +#endif + +#define PASS_LIMIT 256 + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + + +/* + * We default to IRQ0 for the "no irq" hack. Some + * machine types want others as well - they're free + * to redefine this in their header file. + */ +#define is_real_interrupt(irq) ((irq) != 0) + +#ifdef CONFIG_SERIAL_8250_DETECT_IRQ +#define CONFIG_SERIAL_DETECT_IRQ 1 +#endif +#ifdef CONFIG_SERIAL_8250_MANY_PORTS +#define CONFIG_SERIAL_MANY_PORTS 1 +#endif + +/* + * HUB6 is always on. This will be removed once the header + * files have been cleaned. + */ +#define CONFIG_HUB6 1 + +#include +/* + * SERIAL_PORT_DFNS tells us about built-in ports that have no + * standard enumeration mechanism. Platforms that can find all + * serial ports via mechanisms like ACPI or PCI need not supply it. + */ +#ifndef SERIAL_PORT_DFNS +#define SERIAL_PORT_DFNS +#endif + +static const struct old_serial_port old_serial_port[] = { + SERIAL_PORT_DFNS /* defined in asm/serial.h */ +}; + +#define UART_NR CONFIG_SERIAL_8250_NR_UARTS + +#ifdef CONFIG_SERIAL_8250_RSA + +#define PORT_RSA_MAX 4 +static unsigned long probe_rsa[PORT_RSA_MAX]; +static unsigned int probe_rsa_count; +#endif /* CONFIG_SERIAL_8250_RSA */ + +struct uart_8250_port { + struct uart_port port; + struct timer_list timer; /* "no irq" timer */ + struct list_head list; /* ports on this IRQ */ + unsigned short capabilities; /* port capabilities */ + unsigned short bugs; /* port bugs */ + unsigned int tx_loadsz; /* transmit fifo load size */ + unsigned char acr; + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned char mcr_mask; /* mask of user bits */ + unsigned char mcr_force; /* mask of forced bits */ + unsigned char cur_iotype; /* Running I/O type */ + + /* + * Some bits in registers are cleared on a read, so they must + * be saved whenever the register is read but the bits will not + * be immediately processed. + */ +#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS + unsigned char lsr_saved_flags; +#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA + unsigned char msr_saved_flags; +}; + +struct irq_info { + struct hlist_node node; + int irq; + spinlock_t lock; /* Protects list not the hash */ + struct list_head *head; +}; + +#define NR_IRQ_HASH 32 /* Can be adjusted later */ +static struct hlist_head irq_lists[NR_IRQ_HASH]; +static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */ + +/* + * Here we define the default xmit fifo size used for each type of UART. + */ +static const struct serial8250_config uart_config[] = { + [PORT_UNKNOWN] = { + .name = "unknown", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_8250] = { + .name = "8250", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16450] = { + .name = "16450", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16550] = { + .name = "16550", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16550A] = { + .name = "16550A", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO, + }, + [PORT_CIRRUS] = { + .name = "Cirrus", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16650] = { + .name = "ST16650", + .fifo_size = 1, + .tx_loadsz = 1, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16650V2] = { + .name = "ST16650V2", + .fifo_size = 32, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | + UART_FCR_T_TRIG_00, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16750] = { + .name = "TI16750", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | + UART_FCR7_64BYTE, + .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE, + }, + [PORT_STARTECH] = { + .name = "Startech", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16C950] = { + .name = "16C950/954", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16654] = { + .name = "ST16654", + .fifo_size = 64, + .tx_loadsz = 32, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | + UART_FCR_T_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16850] = { + .name = "XR16850", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_RSA] = { + .name = "RSA", + .fifo_size = 2048, + .tx_loadsz = 2048, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11, + .flags = UART_CAP_FIFO, + }, + [PORT_NS16550A] = { + .name = "NS16550A", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_NATSEMI, + }, + [PORT_XSCALE] = { + .name = "XScale", + .fifo_size = 32, + .tx_loadsz = 32, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_UUE, + }, + [PORT_RM9000] = { + .name = "RM9000", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO, + }, + [PORT_OCTEON] = { + .name = "OCTEON", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO, + }, + [PORT_AR7] = { + .name = "AR7", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, + [PORT_U6_16550A] = { + .name = "U6_16550A", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, +}; + +#if defined(CONFIG_MIPS_ALCHEMY) + +/* Au1x00 UART hardware has a weird register layout */ +static const u8 au_io_in_map[] = { + [UART_RX] = 0, + [UART_IER] = 2, + [UART_IIR] = 3, + [UART_LCR] = 5, + [UART_MCR] = 6, + [UART_LSR] = 7, + [UART_MSR] = 8, +}; + +static const u8 au_io_out_map[] = { + [UART_TX] = 1, + [UART_IER] = 2, + [UART_FCR] = 4, + [UART_LCR] = 5, + [UART_MCR] = 6, +}; + +/* sane hardware needs no mapping */ +static inline int map_8250_in_reg(struct uart_port *p, int offset) +{ + if (p->iotype != UPIO_AU) + return offset; + return au_io_in_map[offset]; +} + +static inline int map_8250_out_reg(struct uart_port *p, int offset) +{ + if (p->iotype != UPIO_AU) + return offset; + return au_io_out_map[offset]; +} + +#elif defined(CONFIG_SERIAL_8250_RM9K) + +static const u8 + regmap_in[8] = { + [UART_RX] = 0x00, + [UART_IER] = 0x0c, + [UART_IIR] = 0x14, + [UART_LCR] = 0x1c, + [UART_MCR] = 0x20, + [UART_LSR] = 0x24, + [UART_MSR] = 0x28, + [UART_SCR] = 0x2c + }, + regmap_out[8] = { + [UART_TX] = 0x04, + [UART_IER] = 0x0c, + [UART_FCR] = 0x18, + [UART_LCR] = 0x1c, + [UART_MCR] = 0x20, + [UART_LSR] = 0x24, + [UART_MSR] = 0x28, + [UART_SCR] = 0x2c + }; + +static inline int map_8250_in_reg(struct uart_port *p, int offset) +{ + if (p->iotype != UPIO_RM9000) + return offset; + return regmap_in[offset]; +} + +static inline int map_8250_out_reg(struct uart_port *p, int offset) +{ + if (p->iotype != UPIO_RM9000) + return offset; + return regmap_out[offset]; +} + +#else + +/* sane hardware needs no mapping */ +#define map_8250_in_reg(up, offset) (offset) +#define map_8250_out_reg(up, offset) (offset) + +#endif + +static unsigned int hub6_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + outb(p->hub6 - 1 + offset, p->iobase); + return inb(p->iobase + 1); +} + +static void hub6_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + outb(p->hub6 - 1 + offset, p->iobase); + outb(value, p->iobase + 1); +} + +static unsigned int mem_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return readb(p->membase + offset); +} + +static void mem_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + writeb(value, p->membase + offset); +} + +static void mem32_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + writel(value, p->membase + offset); +} + +static unsigned int mem32_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return readl(p->membase + offset); +} + +static unsigned int au_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return __raw_readl(p->membase + offset); +} + +static void au_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + __raw_writel(value, p->membase + offset); +} + +static unsigned int tsi_serial_in(struct uart_port *p, int offset) +{ + unsigned int tmp; + offset = map_8250_in_reg(p, offset) << p->regshift; + if (offset == UART_IIR) { + tmp = readl(p->membase + (UART_IIR & ~3)); + return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ + } else + return readb(p->membase + offset); +} + +static void tsi_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + if (!((offset == UART_IER) && (value & UART_IER_UUE))) + writeb(value, p->membase + offset); +} + +/* Save the LCR value so it can be re-written when a Busy Detect IRQ occurs. */ +static inline void dwapb_save_out_value(struct uart_port *p, int offset, + int value) +{ + struct uart_8250_port *up = + container_of(p, struct uart_8250_port, port); + + if (offset == UART_LCR) + up->lcr = value; +} + +/* Read the IER to ensure any interrupt is cleared before returning from ISR. */ +static inline void dwapb_check_clear_ier(struct uart_port *p, int offset) +{ + if (offset == UART_TX || offset == UART_IER) + p->serial_in(p, UART_IER); +} + +static void dwapb_serial_out(struct uart_port *p, int offset, int value) +{ + int save_offset = offset; + offset = map_8250_out_reg(p, offset) << p->regshift; + dwapb_save_out_value(p, save_offset, value); + writeb(value, p->membase + offset); + dwapb_check_clear_ier(p, save_offset); +} + +static void dwapb32_serial_out(struct uart_port *p, int offset, int value) +{ + int save_offset = offset; + offset = map_8250_out_reg(p, offset) << p->regshift; + dwapb_save_out_value(p, save_offset, value); + writel(value, p->membase + offset); + dwapb_check_clear_ier(p, save_offset); +} + +static unsigned int io_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return inb(p->iobase + offset); +} + +static void io_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + outb(value, p->iobase + offset); +} + +static void set_io_from_upio(struct uart_port *p) +{ + struct uart_8250_port *up = + container_of(p, struct uart_8250_port, port); + switch (p->iotype) { + case UPIO_HUB6: + p->serial_in = hub6_serial_in; + p->serial_out = hub6_serial_out; + break; + + case UPIO_MEM: + p->serial_in = mem_serial_in; + p->serial_out = mem_serial_out; + break; + + case UPIO_RM9000: + case UPIO_MEM32: + p->serial_in = mem32_serial_in; + p->serial_out = mem32_serial_out; + break; + + case UPIO_AU: + p->serial_in = au_serial_in; + p->serial_out = au_serial_out; + break; + + case UPIO_TSI: + p->serial_in = tsi_serial_in; + p->serial_out = tsi_serial_out; + break; + + case UPIO_DWAPB: + p->serial_in = mem_serial_in; + p->serial_out = dwapb_serial_out; + break; + + case UPIO_DWAPB32: + p->serial_in = mem32_serial_in; + p->serial_out = dwapb32_serial_out; + break; + + default: + p->serial_in = io_serial_in; + p->serial_out = io_serial_out; + break; + } + /* Remember loaded iotype */ + up->cur_iotype = p->iotype; +} + +static void +serial_out_sync(struct uart_8250_port *up, int offset, int value) +{ + struct uart_port *p = &up->port; + switch (p->iotype) { + case UPIO_MEM: + case UPIO_MEM32: + case UPIO_AU: + case UPIO_DWAPB: + case UPIO_DWAPB32: + p->serial_out(p, offset, value); + p->serial_in(p, UART_LCR); /* safe, no side-effects */ + break; + default: + p->serial_out(p, offset, value); + } +} + +#define serial_in(up, offset) \ + (up->port.serial_in(&(up)->port, (offset))) +#define serial_out(up, offset, value) \ + (up->port.serial_out(&(up)->port, (offset), (value))) +/* + * We used to support using pause I/O for certain machines. We + * haven't supported this for a while, but just in case it's badly + * needed for certain old 386 machines, I've left these #define's + * in.... + */ +#define serial_inp(up, offset) serial_in(up, offset) +#define serial_outp(up, offset, value) serial_out(up, offset, value) + +/* Uart divisor latch read */ +static inline int _serial_dl_read(struct uart_8250_port *up) +{ + return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8; +} + +/* Uart divisor latch write */ +static inline void _serial_dl_write(struct uart_8250_port *up, int value) +{ + serial_outp(up, UART_DLL, value & 0xff); + serial_outp(up, UART_DLM, value >> 8 & 0xff); +} + +#if defined(CONFIG_MIPS_ALCHEMY) +/* Au1x00 haven't got a standard divisor latch */ +static int serial_dl_read(struct uart_8250_port *up) +{ + if (up->port.iotype == UPIO_AU) + return __raw_readl(up->port.membase + 0x28); + else + return _serial_dl_read(up); +} + +static void serial_dl_write(struct uart_8250_port *up, int value) +{ + if (up->port.iotype == UPIO_AU) + __raw_writel(value, up->port.membase + 0x28); + else + _serial_dl_write(up, value); +} +#elif defined(CONFIG_SERIAL_8250_RM9K) +static int serial_dl_read(struct uart_8250_port *up) +{ + return (up->port.iotype == UPIO_RM9000) ? + (((__raw_readl(up->port.membase + 0x10) << 8) | + (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff) : + _serial_dl_read(up); +} + +static void serial_dl_write(struct uart_8250_port *up, int value) +{ + if (up->port.iotype == UPIO_RM9000) { + __raw_writel(value, up->port.membase + 0x08); + __raw_writel(value >> 8, up->port.membase + 0x10); + } else { + _serial_dl_write(up, value); + } +} +#else +#define serial_dl_read(up) _serial_dl_read(up) +#define serial_dl_write(up, value) _serial_dl_write(up, value) +#endif + +/* + * For the 16C950 + */ +static void serial_icr_write(struct uart_8250_port *up, int offset, int value) +{ + serial_out(up, UART_SCR, offset); + serial_out(up, UART_ICR, value); +} + +static unsigned int serial_icr_read(struct uart_8250_port *up, int offset) +{ + unsigned int value; + + serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); + serial_out(up, UART_SCR, offset); + value = serial_in(up, UART_ICR); + serial_icr_write(up, UART_ACR, up->acr); + + return value; +} + +/* + * FIFO support. + */ +static void serial8250_clear_fifos(struct uart_8250_port *p) +{ + if (p->capabilities & UART_CAP_FIFO) { + serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_outp(p, UART_FCR, 0); + } +} + +/* + * IER sleep support. UARTs which have EFRs need the "extended + * capability" bit enabled. Note that on XR16C850s, we need to + * reset LCR to write to IER. + */ +static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) +{ + if (p->capabilities & UART_CAP_SLEEP) { + if (p->capabilities & UART_CAP_EFR) { + serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B); + serial_outp(p, UART_EFR, UART_EFR_ECB); + serial_outp(p, UART_LCR, 0); + } + serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0); + if (p->capabilities & UART_CAP_EFR) { + serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B); + serial_outp(p, UART_EFR, 0); + serial_outp(p, UART_LCR, 0); + } + } +} + +#ifdef CONFIG_SERIAL_8250_RSA +/* + * Attempts to turn on the RSA FIFO. Returns zero on failure. + * We set the port uart clock rate if we succeed. + */ +static int __enable_rsa(struct uart_8250_port *up) +{ + unsigned char mode; + int result; + + mode = serial_inp(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + + if (!result) { + serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); + mode = serial_inp(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; + + return result; +} + +static void enable_rsa(struct uart_8250_port *up) +{ + if (up->port.type == PORT_RSA) { + if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + __enable_rsa(up); + spin_unlock_irq(&up->port.lock); + } + if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) + serial_outp(up, UART_RSA_FRR, 0); + } +} + +/* + * Attempts to turn off the RSA FIFO. Returns zero on failure. + * It is unknown why interrupts were disabled in here. However, + * the caller is expected to preserve this behaviour by grabbing + * the spinlock before calling this function. + */ +static void disable_rsa(struct uart_8250_port *up) +{ + unsigned char mode; + int result; + + if (up->port.type == PORT_RSA && + up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + + mode = serial_inp(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + + if (!result) { + serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); + mode = serial_inp(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; + spin_unlock_irq(&up->port.lock); + } +} +#endif /* CONFIG_SERIAL_8250_RSA */ + +/* + * This is a quickie test to see how big the FIFO is. + * It doesn't work at all the time, more's the pity. + */ +static int size_fifo(struct uart_8250_port *up) +{ + unsigned char old_fcr, old_mcr, old_lcr; + unsigned short old_dl; + int count; + + old_lcr = serial_inp(up, UART_LCR); + serial_outp(up, UART_LCR, 0); + old_fcr = serial_inp(up, UART_FCR); + old_mcr = serial_inp(up, UART_MCR); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_outp(up, UART_MCR, UART_MCR_LOOP); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); + old_dl = serial_dl_read(up); + serial_dl_write(up, 0x0001); + serial_outp(up, UART_LCR, 0x03); + for (count = 0; count < 256; count++) + serial_outp(up, UART_TX, count); + mdelay(20);/* FIXME - schedule_timeout */ + for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) && + (count < 256); count++) + serial_inp(up, UART_RX); + serial_outp(up, UART_FCR, old_fcr); + serial_outp(up, UART_MCR, old_mcr); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_dl_write(up, old_dl); + serial_outp(up, UART_LCR, old_lcr); + + return count; +} + +/* + * Read UART ID using the divisor method - set DLL and DLM to zero + * and the revision will be in DLL and device type in DLM. We + * preserve the device state across this. + */ +static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p) +{ + unsigned char old_dll, old_dlm, old_lcr; + unsigned int id; + + old_lcr = serial_inp(p, UART_LCR); + serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_A); + + old_dll = serial_inp(p, UART_DLL); + old_dlm = serial_inp(p, UART_DLM); + + serial_outp(p, UART_DLL, 0); + serial_outp(p, UART_DLM, 0); + + id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8; + + serial_outp(p, UART_DLL, old_dll); + serial_outp(p, UART_DLM, old_dlm); + serial_outp(p, UART_LCR, old_lcr); + + return id; +} + +/* + * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's. + * When this function is called we know it is at least a StarTech + * 16650 V2, but it might be one of several StarTech UARTs, or one of + * its clones. (We treat the broken original StarTech 16650 V1 as a + * 16550, and why not? Startech doesn't seem to even acknowledge its + * existence.) + * + * What evil have men's minds wrought... + */ +static void autoconfig_has_efr(struct uart_8250_port *up) +{ + unsigned int id1, id2, id3, rev; + + /* + * Everything with an EFR has SLEEP + */ + up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; + + /* + * First we check to see if it's an Oxford Semiconductor UART. + * + * If we have to do this here because some non-National + * Semiconductor clone chips lock up if you try writing to the + * LSR register (which serial_icr_read does) + */ + + /* + * Check for Oxford Semiconductor 16C950. + * + * EFR [4] must be set else this test fails. + * + * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca) + * claims that it's needed for 952 dual UART's (which are not + * recommended for new designs). + */ + up->acr = 0; + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, UART_EFR_ECB); + serial_out(up, UART_LCR, 0x00); + id1 = serial_icr_read(up, UART_ID1); + id2 = serial_icr_read(up, UART_ID2); + id3 = serial_icr_read(up, UART_ID3); + rev = serial_icr_read(up, UART_REV); + + DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev); + + if (id1 == 0x16 && id2 == 0xC9 && + (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) { + up->port.type = PORT_16C950; + + /* + * Enable work around for the Oxford Semiconductor 952 rev B + * chip which causes it to seriously miscalculate baud rates + * when DLL is 0. + */ + if (id3 == 0x52 && rev == 0x01) + up->bugs |= UART_BUG_QUOT; + return; + } + + /* + * We check for a XR16C850 by setting DLL and DLM to 0, and then + * reading back DLL and DLM. The chip type depends on the DLM + * value read back: + * 0x10 - XR16C850 and the DLL contains the chip revision. + * 0x12 - XR16C2850. + * 0x14 - XR16C854. + */ + id1 = autoconfig_read_divisor_id(up); + DEBUG_AUTOCONF("850id=%04x ", id1); + + id2 = id1 >> 8; + if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) { + up->port.type = PORT_16850; + return; + } + + /* + * It wasn't an XR16C850. + * + * We distinguish between the '654 and the '650 by counting + * how many bytes are in the FIFO. I'm using this for now, + * since that's the technique that was sent to me in the + * serial driver update, but I'm not convinced this works. + * I've had problems doing this in the past. -TYT + */ + if (size_fifo(up) == 64) + up->port.type = PORT_16654; + else + up->port.type = PORT_16650V2; +} + +/* + * We detected a chip without a FIFO. Only two fall into + * this category - the original 8250 and the 16450. The + * 16450 has a scratch register (accessible with LCR=0) + */ +static void autoconfig_8250(struct uart_8250_port *up) +{ + unsigned char scratch, status1, status2; + + up->port.type = PORT_8250; + + scratch = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, 0xa5); + status1 = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, 0x5a); + status2 = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, scratch); + + if (status1 == 0xa5 && status2 == 0x5a) + up->port.type = PORT_16450; +} + +static int broken_efr(struct uart_8250_port *up) +{ + /* + * Exar ST16C2550 "A2" devices incorrectly detect as + * having an EFR, and report an ID of 0x0201. See + * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html + */ + if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) + return 1; + + return 0; +} + +/* + * We know that the chip has FIFOs. Does it have an EFR? The + * EFR is located in the same register position as the IIR and + * we know the top two bits of the IIR are currently set. The + * EFR should contain zero. Try to read the EFR. + */ +static void autoconfig_16550a(struct uart_8250_port *up) +{ + unsigned char status1, status2; + unsigned int iersave; + + up->port.type = PORT_16550A; + up->capabilities |= UART_CAP_FIFO; + + /* + * Check for presence of the EFR when DLAB is set. + * Only ST16C650V1 UARTs pass this test. + */ + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); + if (serial_in(up, UART_EFR) == 0) { + serial_outp(up, UART_EFR, 0xA8); + if (serial_in(up, UART_EFR) != 0) { + DEBUG_AUTOCONF("EFRv1 "); + up->port.type = PORT_16650; + up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; + } else { + DEBUG_AUTOCONF("Motorola 8xxx DUART "); + } + serial_outp(up, UART_EFR, 0); + return; + } + + /* + * Maybe it requires 0xbf to be written to the LCR. + * (other ST16C650V2 UARTs, TI16C752A, etc) + */ + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) { + DEBUG_AUTOCONF("EFRv2 "); + autoconfig_has_efr(up); + return; + } + + /* + * Check for a National Semiconductor SuperIO chip. + * Attempt to switch to bank 2, read the value of the LOOP bit + * from EXCR1. Switch back to bank 0, change it in MCR. Then + * switch back to bank 2, read it from EXCR1 again and check + * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2 + */ + serial_outp(up, UART_LCR, 0); + status1 = serial_in(up, UART_MCR); + serial_outp(up, UART_LCR, 0xE0); + status2 = serial_in(up, 0x02); /* EXCR1 */ + + if (!((status2 ^ status1) & UART_MCR_LOOP)) { + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP); + serial_outp(up, UART_LCR, 0xE0); + status2 = serial_in(up, 0x02); /* EXCR1 */ + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_MCR, status1); + + if ((status2 ^ status1) & UART_MCR_LOOP) { + unsigned short quot; + + serial_outp(up, UART_LCR, 0xE0); + + quot = serial_dl_read(up); + quot <<= 3; + + status1 = serial_in(up, 0x04); /* EXCR2 */ + status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ + status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ + serial_outp(up, 0x04, status1); + + serial_dl_write(up, quot); + + serial_outp(up, UART_LCR, 0); + + up->port.uartclk = 921600*16; + up->port.type = PORT_NS16550A; + up->capabilities |= UART_NATSEMI; + return; + } + } + + /* + * No EFR. Try to detect a TI16750, which only sets bit 5 of + * the IIR when 64 byte FIFO mode is enabled when DLAB is set. + * Try setting it with and without DLAB set. Cheap clones + * set bit 5 without DLAB set. + */ + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + status1 = serial_in(up, UART_IIR) >> 5; + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + status2 = serial_in(up, UART_IIR) >> 5; + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_LCR, 0); + + DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2); + + if (status1 == 6 && status2 == 7) { + up->port.type = PORT_16750; + up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP; + return; + } + + /* + * Try writing and reading the UART_IER_UUE bit (b6). + * If it works, this is probably one of the Xscale platform's + * internal UARTs. + * We're going to explicitly set the UUE bit to 0 before + * trying to write and read a 1 just to make sure it's not + * already a 1 and maybe locked there before we even start start. + */ + iersave = serial_in(up, UART_IER); + serial_outp(up, UART_IER, iersave & ~UART_IER_UUE); + if (!(serial_in(up, UART_IER) & UART_IER_UUE)) { + /* + * OK it's in a known zero state, try writing and reading + * without disturbing the current state of the other bits. + */ + serial_outp(up, UART_IER, iersave | UART_IER_UUE); + if (serial_in(up, UART_IER) & UART_IER_UUE) { + /* + * It's an Xscale. + * We'll leave the UART_IER_UUE bit set to 1 (enabled). + */ + DEBUG_AUTOCONF("Xscale "); + up->port.type = PORT_XSCALE; + up->capabilities |= UART_CAP_UUE; + return; + } + } else { + /* + * If we got here we couldn't force the IER_UUE bit to 0. + * Log it and continue. + */ + DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 "); + } + serial_outp(up, UART_IER, iersave); + + /* + * We distinguish between 16550A and U6 16550A by counting + * how many bytes are in the FIFO. + */ + if (up->port.type == PORT_16550A && size_fifo(up) == 64) { + up->port.type = PORT_U6_16550A; + up->capabilities |= UART_CAP_AFE; + } +} + +/* + * This routine is called by rs_init() to initialize a specific serial + * port. It determines what type of UART chip this serial port is + * using: 8250, 16450, 16550, 16550A. The important question is + * whether or not this UART is a 16550A or not, since this will + * determine whether or not we can use its FIFO features or not. + */ +static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) +{ + unsigned char status1, scratch, scratch2, scratch3; + unsigned char save_lcr, save_mcr; + unsigned long flags; + + if (!up->port.iobase && !up->port.mapbase && !up->port.membase) + return; + + DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ", + serial_index(&up->port), up->port.iobase, up->port.membase); + + /* + * We really do need global IRQs disabled here - we're going to + * be frobbing the chips IRQ enable register to see if it exists. + */ + spin_lock_irqsave(&up->port.lock, flags); + + up->capabilities = 0; + up->bugs = 0; + + if (!(up->port.flags & UPF_BUGGY_UART)) { + /* + * Do a simple existence test first; if we fail this, + * there's no point trying anything else. + * + * 0x80 is used as a nonsense port to prevent against + * false positives due to ISA bus float. The + * assumption is that 0x80 is a non-existent port; + * which should be safe since include/asm/io.h also + * makes this assumption. + * + * Note: this is safe as long as MCR bit 4 is clear + * and the device is in "PC" mode. + */ + scratch = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, 0); +#ifdef __i386__ + outb(0xff, 0x080); +#endif + /* + * Mask out IER[7:4] bits for test as some UARTs (e.g. TL + * 16C754B) allow only to modify them if an EFR bit is set. + */ + scratch2 = serial_inp(up, UART_IER) & 0x0f; + serial_outp(up, UART_IER, 0x0F); +#ifdef __i386__ + outb(0, 0x080); +#endif + scratch3 = serial_inp(up, UART_IER) & 0x0f; + serial_outp(up, UART_IER, scratch); + if (scratch2 != 0 || scratch3 != 0x0F) { + /* + * We failed; there's nothing here + */ + DEBUG_AUTOCONF("IER test failed (%02x, %02x) ", + scratch2, scratch3); + goto out; + } + } + + save_mcr = serial_in(up, UART_MCR); + save_lcr = serial_in(up, UART_LCR); + + /* + * Check to see if a UART is really there. Certain broken + * internal modems based on the Rockwell chipset fail this + * test, because they apparently don't implement the loopback + * test mode. So this test is skipped on the COM 1 through + * COM 4 ports. This *should* be safe, since no board + * manufacturer would be stupid enough to design a board + * that conflicts with COM 1-4 --- we hope! + */ + if (!(up->port.flags & UPF_SKIP_TEST)) { + serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); + status1 = serial_inp(up, UART_MSR) & 0xF0; + serial_outp(up, UART_MCR, save_mcr); + if (status1 != 0x90) { + DEBUG_AUTOCONF("LOOP test failed (%02x) ", + status1); + goto out; + } + } + + /* + * We're pretty sure there's a port here. Lets find out what + * type of port it is. The IIR top two bits allows us to find + * out if it's 8250 or 16450, 16550, 16550A or later. This + * determines what we test for next. + * + * We also initialise the EFR (if any) to zero for later. The + * EFR occupies the same register location as the FCR and IIR. + */ + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_outp(up, UART_EFR, 0); + serial_outp(up, UART_LCR, 0); + + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + scratch = serial_in(up, UART_IIR) >> 6; + + DEBUG_AUTOCONF("iir=%d ", scratch); + + switch (scratch) { + case 0: + autoconfig_8250(up); + break; + case 1: + up->port.type = PORT_UNKNOWN; + break; + case 2: + up->port.type = PORT_16550; + break; + case 3: + autoconfig_16550a(up); + break; + } + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * Only probe for RSA ports if we got the region. + */ + if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) { + int i; + + for (i = 0 ; i < probe_rsa_count; ++i) { + if (probe_rsa[i] == up->port.iobase && + __enable_rsa(up)) { + up->port.type = PORT_RSA; + break; + } + } + } +#endif + + serial_outp(up, UART_LCR, save_lcr); + + if (up->capabilities != uart_config[up->port.type].flags) { + printk(KERN_WARNING + "ttyS%d: detected caps %08x should be %08x\n", + serial_index(&up->port), up->capabilities, + uart_config[up->port.type].flags); + } + + up->port.fifosize = uart_config[up->port.type].fifo_size; + up->capabilities = uart_config[up->port.type].flags; + up->tx_loadsz = uart_config[up->port.type].tx_loadsz; + + if (up->port.type == PORT_UNKNOWN) + goto out; + + /* + * Reset the UART. + */ +#ifdef CONFIG_SERIAL_8250_RSA + if (up->port.type == PORT_RSA) + serial_outp(up, UART_RSA_FRR, 0); +#endif + serial_outp(up, UART_MCR, save_mcr); + serial8250_clear_fifos(up); + serial_in(up, UART_RX); + if (up->capabilities & UART_CAP_UUE) + serial_outp(up, UART_IER, UART_IER_UUE); + else + serial_outp(up, UART_IER, 0); + + out: + spin_unlock_irqrestore(&up->port.lock, flags); + DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name); +} + +static void autoconfig_irq(struct uart_8250_port *up) +{ + unsigned char save_mcr, save_ier; + unsigned char save_ICP = 0; + unsigned int ICP = 0; + unsigned long irqs; + int irq; + + if (up->port.flags & UPF_FOURPORT) { + ICP = (up->port.iobase & 0xfe0) | 0x1f; + save_ICP = inb_p(ICP); + outb_p(0x80, ICP); + (void) inb_p(ICP); + } + + /* forget possible initially masked and pending IRQ */ + probe_irq_off(probe_irq_on()); + save_mcr = serial_inp(up, UART_MCR); + save_ier = serial_inp(up, UART_IER); + serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); + + irqs = probe_irq_on(); + serial_outp(up, UART_MCR, 0); + udelay(10); + if (up->port.flags & UPF_FOURPORT) { + serial_outp(up, UART_MCR, + UART_MCR_DTR | UART_MCR_RTS); + } else { + serial_outp(up, UART_MCR, + UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); + } + serial_outp(up, UART_IER, 0x0f); /* enable all intrs */ + (void)serial_inp(up, UART_LSR); + (void)serial_inp(up, UART_RX); + (void)serial_inp(up, UART_IIR); + (void)serial_inp(up, UART_MSR); + serial_outp(up, UART_TX, 0xFF); + udelay(20); + irq = probe_irq_off(irqs); + + serial_outp(up, UART_MCR, save_mcr); + serial_outp(up, UART_IER, save_ier); + + if (up->port.flags & UPF_FOURPORT) + outb_p(save_ICP, ICP); + + up->port.irq = (irq > 0) ? irq : 0; +} + +static inline void __stop_tx(struct uart_8250_port *p) +{ + if (p->ier & UART_IER_THRI) { + p->ier &= ~UART_IER_THRI; + serial_out(p, UART_IER, p->ier); + } +} + +static void serial8250_stop_tx(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + __stop_tx(up); + + /* + * We really want to stop the transmitter from sending. + */ + if (up->port.type == PORT_16C950) { + up->acr |= UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void transmit_chars(struct uart_8250_port *up); + +static void serial8250_start_tx(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + + if (up->bugs & UART_BUG_TXEN) { + unsigned char lsr; + lsr = serial_in(up, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + if ((up->port.type == PORT_RM9000) ? + (lsr & UART_LSR_THRE) : + (lsr & UART_LSR_TEMT)) + transmit_chars(up); + } + } + + /* + * Re-enable the transmitter if we disabled it. + */ + if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { + up->acr &= ~UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void serial8250_stop_rx(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static void serial8250_enable_ms(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + /* no MSR capabilities */ + if (up->bugs & UART_BUG_NOMSR) + return; + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static void +receive_chars(struct uart_8250_port *up, unsigned int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned char ch, lsr = *status; + int max_count = 256; + char flag; + + do { + if (likely(lsr & UART_LSR_DR)) + ch = serial_inp(up, UART_RX); + else + /* + * Intel 82571 has a Serial Over Lan device that will + * set UART_LSR_BI without setting UART_LSR_DR when + * it receives a break. To avoid reading from the + * receive buffer without UART_LSR_DR bit set, we + * just force the read character to be 0 + */ + ch = 0; + + flag = TTY_NORMAL; + up->port.icount.rx++; + + lsr |= up->lsr_saved_flags; + up->lsr_saved_flags = 0; + + if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { + /* + * For statistics only + */ + if (lsr & UART_LSR_BI) { + lsr &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (lsr & UART_LSR_PE) + up->port.icount.parity++; + else if (lsr & UART_LSR_FE) + up->port.icount.frame++; + if (lsr & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ignored. + */ + lsr &= up->port.read_status_mask; + + if (lsr & UART_LSR_BI) { + DEBUG_INTR("handling break...."); + flag = TTY_BREAK; + } else if (lsr & UART_LSR_PE) + flag = TTY_PARITY; + else if (lsr & UART_LSR_FE) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + + uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); + +ignore_char: + lsr = serial_inp(up, UART_LSR); + } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); + spin_unlock(&up->port.lock); + tty_flip_buffer_push(tty); + spin_lock(&up->port.lock); + *status = lsr; +} + +static void transmit_chars(struct uart_8250_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_outp(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_tx_stopped(&up->port)) { + serial8250_stop_tx(&up->port); + return; + } + if (uart_circ_empty(xmit)) { + __stop_tx(up); + return; + } + + count = up->tx_loadsz; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + DEBUG_INTR("THRE..."); + + if (uart_circ_empty(xmit)) + __stop_tx(up); +} + +static unsigned int check_modem_status(struct uart_8250_port *up) +{ + unsigned int status = serial_in(up, UART_MSR); + + status |= up->msr_saved_flags; + up->msr_saved_flags = 0; + if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && + up->port.state != NULL) { + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); + } + + return status; +} + +/* + * This handles the interrupt from one port. + */ +static void serial8250_handle_port(struct uart_8250_port *up) +{ + unsigned int status; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + status = serial_inp(up, UART_LSR); + + DEBUG_INTR("status = %x...", status); + + if (status & (UART_LSR_DR | UART_LSR_BI)) + receive_chars(up, &status); + check_modem_status(up); + if (status & UART_LSR_THRE) + transmit_chars(up); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* + * This is the serial driver's interrupt routine. + * + * Arjan thinks the old way was overly complex, so it got simplified. + * Alan disagrees, saying that need the complexity to handle the weird + * nature of ISA shared interrupts. (This is a special exception.) + * + * In order to handle ISA shared interrupts properly, we need to check + * that all ports have been serviced, and therefore the ISA interrupt + * line has been de-asserted. + * + * This means we need to loop through all ports. checking that they + * don't have an interrupt pending. + */ +static irqreturn_t serial8250_interrupt(int irq, void *dev_id) +{ + struct irq_info *i = dev_id; + struct list_head *l, *end = NULL; + int pass_counter = 0, handled = 0; + + DEBUG_INTR("serial8250_interrupt(%d)...", irq); + + spin_lock(&i->lock); + + l = i->head; + do { + struct uart_8250_port *up; + unsigned int iir; + + up = list_entry(l, struct uart_8250_port, list); + + iir = serial_in(up, UART_IIR); + if (!(iir & UART_IIR_NO_INT)) { + serial8250_handle_port(up); + + handled = 1; + + end = NULL; + } else if ((up->port.iotype == UPIO_DWAPB || + up->port.iotype == UPIO_DWAPB32) && + (iir & UART_IIR_BUSY) == UART_IIR_BUSY) { + /* The DesignWare APB UART has an Busy Detect (0x07) + * interrupt meaning an LCR write attempt occured while the + * UART was busy. The interrupt must be cleared by reading + * the UART status register (USR) and the LCR re-written. */ + unsigned int status; + status = *(volatile u32 *)up->port.private_data; + serial_out(up, UART_LCR, up->lcr); + + handled = 1; + + end = NULL; + } else if (end == NULL) + end = l; + + l = l->next; + + if (l == i->head && pass_counter++ > PASS_LIMIT) { + /* If we hit this, we're dead. */ + printk_ratelimited(KERN_ERR + "serial8250: too much work for irq%d\n", irq); + break; + } + } while (l != end); + + spin_unlock(&i->lock); + + DEBUG_INTR("end.\n"); + + return IRQ_RETVAL(handled); +} + +/* + * To support ISA shared interrupts, we need to have one interrupt + * handler that ensures that the IRQ line has been deasserted + * before returning. Failing to do this will result in the IRQ + * line being stuck active, and, since ISA irqs are edge triggered, + * no more IRQs will be seen. + */ +static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) +{ + spin_lock_irq(&i->lock); + + if (!list_empty(i->head)) { + if (i->head == &up->list) + i->head = i->head->next; + list_del(&up->list); + } else { + BUG_ON(i->head != &up->list); + i->head = NULL; + } + spin_unlock_irq(&i->lock); + /* List empty so throw away the hash node */ + if (i->head == NULL) { + hlist_del(&i->node); + kfree(i); + } +} + +static int serial_link_irq_chain(struct uart_8250_port *up) +{ + struct hlist_head *h; + struct hlist_node *n; + struct irq_info *i; + int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0; + + mutex_lock(&hash_mutex); + + h = &irq_lists[up->port.irq % NR_IRQ_HASH]; + + hlist_for_each(n, h) { + i = hlist_entry(n, struct irq_info, node); + if (i->irq == up->port.irq) + break; + } + + if (n == NULL) { + i = kzalloc(sizeof(struct irq_info), GFP_KERNEL); + if (i == NULL) { + mutex_unlock(&hash_mutex); + return -ENOMEM; + } + spin_lock_init(&i->lock); + i->irq = up->port.irq; + hlist_add_head(&i->node, h); + } + mutex_unlock(&hash_mutex); + + spin_lock_irq(&i->lock); + + if (i->head) { + list_add(&up->list, i->head); + spin_unlock_irq(&i->lock); + + ret = 0; + } else { + INIT_LIST_HEAD(&up->list); + i->head = &up->list; + spin_unlock_irq(&i->lock); + irq_flags |= up->port.irqflags; + ret = request_irq(up->port.irq, serial8250_interrupt, + irq_flags, "serial", i); + if (ret < 0) + serial_do_unlink(i, up); + } + + return ret; +} + +static void serial_unlink_irq_chain(struct uart_8250_port *up) +{ + struct irq_info *i; + struct hlist_node *n; + struct hlist_head *h; + + mutex_lock(&hash_mutex); + + h = &irq_lists[up->port.irq % NR_IRQ_HASH]; + + hlist_for_each(n, h) { + i = hlist_entry(n, struct irq_info, node); + if (i->irq == up->port.irq) + break; + } + + BUG_ON(n == NULL); + BUG_ON(i->head == NULL); + + if (list_empty(i->head)) + free_irq(up->port.irq, i); + + serial_do_unlink(i, up); + mutex_unlock(&hash_mutex); +} + +/* + * This function is used to handle ports that do not have an + * interrupt. This doesn't work very well for 16450's, but gives + * barely passable results for a 16550A. (Although at the expense + * of much CPU overhead). + */ +static void serial8250_timeout(unsigned long data) +{ + struct uart_8250_port *up = (struct uart_8250_port *)data; + unsigned int iir; + + iir = serial_in(up, UART_IIR); + if (!(iir & UART_IIR_NO_INT)) + serial8250_handle_port(up); + mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port)); +} + +static void serial8250_backup_timeout(unsigned long data) +{ + struct uart_8250_port *up = (struct uart_8250_port *)data; + unsigned int iir, ier = 0, lsr; + unsigned long flags; + + /* + * Must disable interrupts or else we risk racing with the interrupt + * based handler. + */ + if (is_real_interrupt(up->port.irq)) { + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + } + + iir = serial_in(up, UART_IIR); + + /* + * This should be a safe test for anyone who doesn't trust the + * IIR bits on their UART, but it's specifically designed for + * the "Diva" UART used on the management processor on many HP + * ia64 and parisc boxes. + */ + spin_lock_irqsave(&up->port.lock, flags); + lsr = serial_in(up, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + spin_unlock_irqrestore(&up->port.lock, flags); + if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) && + (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) && + (lsr & UART_LSR_THRE)) { + iir &= ~(UART_IIR_ID | UART_IIR_NO_INT); + iir |= UART_IIR_THRI; + } + + if (!(iir & UART_IIR_NO_INT)) + serial8250_handle_port(up); + + if (is_real_interrupt(up->port.irq)) + serial_out(up, UART_IER, ier); + + /* Standard timer interval plus 0.2s to keep the port running */ + mod_timer(&up->timer, + jiffies + uart_poll_timeout(&up->port) + HZ / 5); +} + +static unsigned int serial8250_tx_empty(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned long flags; + unsigned int lsr; + + spin_lock_irqsave(&up->port.lock, flags); + lsr = serial_in(up, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + spin_unlock_irqrestore(&up->port.lock, flags); + + return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0; +} + +static unsigned int serial8250_get_mctrl(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned int status; + unsigned int ret; + + status = check_modem_status(up); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr; + + serial_out(up, UART_MCR, mcr); +} + +static void serial8250_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct uart_8250_port *up, int bits) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + for (;;) { + status = serial_in(up, UART_LSR); + + up->lsr_saved_flags |= status & LSR_SAVE_FLAGS; + + if ((status & bits) == bits) + break; + if (--tmout == 0) + break; + udelay(1); + } + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + unsigned int tmout; + for (tmout = 1000000; tmout; tmout--) { + unsigned int msr = serial_in(up, UART_MSR); + up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; + if (msr & UART_MSR_CTS) + break; + udelay(1); + touch_nmi_watchdog(); + } + } +} + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int serial8250_get_poll_char(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned char lsr = serial_inp(up, UART_LSR); + + if (!(lsr & UART_LSR_DR)) + return NO_POLL_CHAR; + + return serial_inp(up, UART_RX); +} + + +static void serial8250_put_poll_char(struct uart_port *port, + unsigned char c) +{ + unsigned int ier; + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + if (up->capabilities & UART_CAP_UUE) + serial_out(up, UART_IER, UART_IER_UUE); + else + serial_out(up, UART_IER, 0); + + wait_for_xmitr(up, BOTH_EMPTY); + /* + * Send the character out. + * If a LF, also do CR... + */ + serial_out(up, UART_TX, c); + if (c == 10) { + wait_for_xmitr(up, BOTH_EMPTY); + serial_out(up, UART_TX, 13); + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up, BOTH_EMPTY); + serial_out(up, UART_IER, ier); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static int serial8250_startup(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned long flags; + unsigned char lsr, iir; + int retval; + + up->port.fifosize = uart_config[up->port.type].fifo_size; + up->tx_loadsz = uart_config[up->port.type].tx_loadsz; + up->capabilities = uart_config[up->port.type].flags; + up->mcr = 0; + + if (up->port.iotype != up->cur_iotype) + set_io_from_upio(port); + + if (up->port.type == PORT_16C950) { + /* Wake up and initialize UART */ + up->acr = 0; + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_outp(up, UART_EFR, UART_EFR_ECB); + serial_outp(up, UART_IER, 0); + serial_outp(up, UART_LCR, 0); + serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, UART_EFR_ECB); + serial_outp(up, UART_LCR, 0); + } + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * If this is an RSA port, see if we can kick it up to the + * higher speed clock. + */ + enable_rsa(up); +#endif + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial8250_clear_fifos(up); + + /* + * Clear the interrupt registers. + */ + (void) serial_inp(up, UART_LSR); + (void) serial_inp(up, UART_RX); + (void) serial_inp(up, UART_IIR); + (void) serial_inp(up, UART_MSR); + + /* + * At this point, there's no way the LSR could still be 0xff; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (!(up->port.flags & UPF_BUGGY_UART) && + (serial_inp(up, UART_LSR) == 0xff)) { + printk(KERN_INFO "ttyS%d: LSR safety check engaged!\n", + serial_index(&up->port)); + return -ENODEV; + } + + /* + * For a XR16C850, we need to set the trigger levels + */ + if (up->port.type == PORT_16850) { + unsigned char fctr; + + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + + fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX); + serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX); + serial_outp(up, UART_TRG, UART_TRG_96); + serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX); + serial_outp(up, UART_TRG, UART_TRG_96); + + serial_outp(up, UART_LCR, 0); + } + + if (is_real_interrupt(up->port.irq)) { + unsigned char iir1; + /* + * Test for UARTs that do not reassert THRE when the + * transmitter is idle and the interrupt has already + * been cleared. Real 16550s should always reassert + * this interrupt whenever the transmitter is idle and + * the interrupt is enabled. Delays are necessary to + * allow register changes to become visible. + */ + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.irqflags & IRQF_SHARED) + disable_irq_nosync(up->port.irq); + + wait_for_xmitr(up, UART_LSR_THRE); + serial_out_sync(up, UART_IER, UART_IER_THRI); + udelay(1); /* allow THRE to set */ + iir1 = serial_in(up, UART_IIR); + serial_out(up, UART_IER, 0); + serial_out_sync(up, UART_IER, UART_IER_THRI); + udelay(1); /* allow a working UART time to re-assert THRE */ + iir = serial_in(up, UART_IIR); + serial_out(up, UART_IER, 0); + + if (up->port.irqflags & IRQF_SHARED) + enable_irq(up->port.irq); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * If the interrupt is not reasserted, setup a timer to + * kick the UART on a regular basis. + */ + if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) { + up->bugs |= UART_BUG_THRE; + pr_debug("ttyS%d - using backup timer\n", + serial_index(port)); + } + } + + /* + * The above check will only give an accurate result the first time + * the port is opened so this value needs to be preserved. + */ + if (up->bugs & UART_BUG_THRE) { + up->timer.function = serial8250_backup_timeout; + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + + uart_poll_timeout(port) + HZ / 5); + } + + /* + * If the "interrupt" for this port doesn't correspond with any + * hardware interrupt, we use a timer-based system. The original + * driver used to do this with IRQ0. + */ + if (!is_real_interrupt(up->port.irq)) { + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + uart_poll_timeout(port)); + } else { + retval = serial_link_irq_chain(up); + if (retval) + return retval; + } + + /* + * Now, initialize the UART + */ + serial_outp(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.flags & UPF_FOURPORT) { + if (!is_real_interrupt(up->port.irq)) + up->port.mctrl |= TIOCM_OUT1; + } else + /* + * Most PC uarts need OUT2 raised to enable interrupts. + */ + if (is_real_interrupt(up->port.irq)) + up->port.mctrl |= TIOCM_OUT2; + + serial8250_set_mctrl(&up->port, up->port.mctrl); + + /* Serial over Lan (SoL) hack: + Intel 8257x Gigabit ethernet chips have a + 16550 emulation, to be used for Serial Over Lan. + Those chips take a longer time than a normal + serial device to signalize that a transmission + data was queued. Due to that, the above test generally + fails. One solution would be to delay the reading of + iir. However, this is not reliable, since the timeout + is variable. So, let's just don't test if we receive + TX irq. This way, we'll never enable UART_BUG_TXEN. + */ + if (skip_txen_test || up->port.flags & UPF_NO_TXEN_TEST) + goto dont_test_tx_en; + + /* + * Do a quick test to see if we receive an + * interrupt when we enable the TX irq. + */ + serial_outp(up, UART_IER, UART_IER_THRI); + lsr = serial_in(up, UART_LSR); + iir = serial_in(up, UART_IIR); + serial_outp(up, UART_IER, 0); + + if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) { + if (!(up->bugs & UART_BUG_TXEN)) { + up->bugs |= UART_BUG_TXEN; + pr_debug("ttyS%d - enabling bad tx status workarounds\n", + serial_index(port)); + } + } else { + up->bugs &= ~UART_BUG_TXEN; + } + +dont_test_tx_en: + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Clear the interrupt registers again for luck, and clear the + * saved flags to avoid getting false values from polling + * routines or the previous session. + */ + serial_inp(up, UART_LSR); + serial_inp(up, UART_RX); + serial_inp(up, UART_IIR); + serial_inp(up, UART_MSR); + up->lsr_saved_flags = 0; + up->msr_saved_flags = 0; + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_outp(up, UART_IER, up->ier); + + if (up->port.flags & UPF_FOURPORT) { + unsigned int icp; + /* + * Enable interrupts on the AST Fourport board + */ + icp = (up->port.iobase & 0xfe0) | 0x01f; + outb_p(0x80, icp); + (void) inb_p(icp); + } + + return 0; +} + +static void serial8250_shutdown(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned long flags; + + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_outp(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.flags & UPF_FOURPORT) { + /* reset interrupts on the AST Fourport board */ + inb((up->port.iobase & 0xfe0) | 0x1f); + up->port.mctrl |= TIOCM_OUT1; + } else + up->port.mctrl &= ~TIOCM_OUT2; + + serial8250_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); + serial8250_clear_fifos(up); + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * Reset the RSA board back to 115kbps compat mode. + */ + disable_rsa(up); +#endif + + /* + * Read data port to reset things, and then unlink from + * the IRQ chain. + */ + (void) serial_in(up, UART_RX); + + del_timer_sync(&up->timer); + up->timer.function = serial8250_timeout; + if (is_real_interrupt(up->port.irq)) + serial_unlink_irq_chain(up); +} + +static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) +{ + unsigned int quot; + + /* + * Handle magic divisors for baud rates above baud_base on + * SMSC SuperIO chips. + */ + if ((port->flags & UPF_MAGIC_MULTIPLIER) && + baud == (port->uartclk/4)) + quot = 0x8001; + else if ((port->flags & UPF_MAGIC_MULTIPLIER) && + baud == (port->uartclk/8)) + quot = 0x8002; + else + quot = uart_get_divisor(port, baud); + + return quot; +} + +void +serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + unsigned char cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (termios->c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / 0xffff, + port->uartclk / 16); + quot = serial8250_get_divisor(port, baud); + + /* + * Oxford Semi 952 rev B workaround + */ + if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0) + quot++; + + if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) { + if (baud < 2400) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; + else + fcr = uart_config[up->port.type].fcr; + } + + /* + * MCR-based auto flow control. When AFE is enabled, RTS will be + * deasserted when the receive FIFO contains more characters than + * the trigger, or the MCR RTS bit is cleared. In the case where + * the remote UART is not using CTS auto flow control, we must + * have sufficient FIFO entries for the latency of the remote + * UART to respond. IOW, at least 32 bytes of FIFO. + */ + if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) { + up->mcr &= ~UART_MCR_AFE; + if (termios->c_cflag & CRTSCTS) + up->mcr |= UART_MCR_AFE; + } + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (!(up->bugs & UART_BUG_NOMSR) && + UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + if (up->capabilities & UART_CAP_UUE) + up->ier |= UART_IER_UUE | UART_IER_RTOIE; + + serial_out(up, UART_IER, up->ier); + + if (up->capabilities & UART_CAP_EFR) { + unsigned char efr = 0; + /* + * TI16C752/Startech hardware flow control. FIXME: + * - TI16C752 requires control thresholds to be set. + * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled. + */ + if (termios->c_cflag & CRTSCTS) + efr |= UART_EFR_CTS; + + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_outp(up, UART_EFR, efr); + } + +#ifdef CONFIG_ARCH_OMAP + /* Workaround to enable 115200 baud on OMAP1510 internal ports */ + if (cpu_is_omap1510() && is_omap_port(up)) { + if (baud == 115200) { + quot = 1; + serial_out(up, UART_OMAP_OSC_12M_SEL, 1); + } else + serial_out(up, UART_OMAP_OSC_12M_SEL, 0); + } +#endif + + if (up->capabilities & UART_NATSEMI) { + /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */ + serial_outp(up, UART_LCR, 0xe0); + } else { + serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ + } + + serial_dl_write(up, quot); + + /* + * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR + * is written without DLAB set, this mode will be disabled. + */ + if (up->port.type == PORT_16750) + serial_outp(up, UART_FCR, fcr); + + serial_outp(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; /* Save LCR */ + if (up->port.type != PORT_16750) { + if (fcr & UART_FCR_ENABLE_FIFO) { + /* emulated UARTs (Lucent Venus 167x) need two steps */ + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + } + serial_outp(up, UART_FCR, fcr); /* set fcr */ + } + serial8250_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); +} +EXPORT_SYMBOL(serial8250_do_set_termios); + +static void +serial8250_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + if (port->set_termios) + port->set_termios(port, termios, old); + else + serial8250_do_set_termios(port, termios, old); +} + +static void +serial8250_set_ldisc(struct uart_port *port, int new) +{ + if (new == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + serial8250_enable_ms(port); + } else + port->flags &= ~UPF_HARDPPS_CD; +} + + +void serial8250_do_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_8250_port *p = + container_of(port, struct uart_8250_port, port); + + serial8250_set_sleep(p, state != 0); +} +EXPORT_SYMBOL(serial8250_do_pm); + +static void +serial8250_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + if (port->pm) + port->pm(port, state, oldstate); + else + serial8250_do_pm(port, state, oldstate); +} + +static unsigned int serial8250_port_size(struct uart_8250_port *pt) +{ + if (pt->port.iotype == UPIO_AU) + return 0x1000; +#ifdef CONFIG_ARCH_OMAP + if (is_omap_port(pt)) + return 0x16 << pt->port.regshift; +#endif + return 8 << pt->port.regshift; +} + +/* + * Resource handling. + */ +static int serial8250_request_std_resource(struct uart_8250_port *up) +{ + unsigned int size = serial8250_port_size(up); + int ret = 0; + + switch (up->port.iotype) { + case UPIO_AU: + case UPIO_TSI: + case UPIO_MEM32: + case UPIO_MEM: + case UPIO_DWAPB: + case UPIO_DWAPB32: + if (!up->port.mapbase) + break; + + if (!request_mem_region(up->port.mapbase, size, "serial")) { + ret = -EBUSY; + break; + } + + if (up->port.flags & UPF_IOREMAP) { + up->port.membase = ioremap_nocache(up->port.mapbase, + size); + if (!up->port.membase) { + release_mem_region(up->port.mapbase, size); + ret = -ENOMEM; + } + } + break; + + case UPIO_HUB6: + case UPIO_PORT: + if (!request_region(up->port.iobase, size, "serial")) + ret = -EBUSY; + break; + } + return ret; +} + +static void serial8250_release_std_resource(struct uart_8250_port *up) +{ + unsigned int size = serial8250_port_size(up); + + switch (up->port.iotype) { + case UPIO_AU: + case UPIO_TSI: + case UPIO_MEM32: + case UPIO_MEM: + case UPIO_DWAPB: + case UPIO_DWAPB32: + if (!up->port.mapbase) + break; + + if (up->port.flags & UPF_IOREMAP) { + iounmap(up->port.membase); + up->port.membase = NULL; + } + + release_mem_region(up->port.mapbase, size); + break; + + case UPIO_HUB6: + case UPIO_PORT: + release_region(up->port.iobase, size); + break; + } +} + +static int serial8250_request_rsa_resource(struct uart_8250_port *up) +{ + unsigned long start = UART_RSA_BASE << up->port.regshift; + unsigned int size = 8 << up->port.regshift; + int ret = -EINVAL; + + switch (up->port.iotype) { + case UPIO_HUB6: + case UPIO_PORT: + start += up->port.iobase; + if (request_region(start, size, "serial-rsa")) + ret = 0; + else + ret = -EBUSY; + break; + } + + return ret; +} + +static void serial8250_release_rsa_resource(struct uart_8250_port *up) +{ + unsigned long offset = UART_RSA_BASE << up->port.regshift; + unsigned int size = 8 << up->port.regshift; + + switch (up->port.iotype) { + case UPIO_HUB6: + case UPIO_PORT: + release_region(up->port.iobase + offset, size); + break; + } +} + +static void serial8250_release_port(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + serial8250_release_std_resource(up); + if (up->port.type == PORT_RSA) + serial8250_release_rsa_resource(up); +} + +static int serial8250_request_port(struct uart_port *port) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + int ret = 0; + + ret = serial8250_request_std_resource(up); + if (ret == 0 && up->port.type == PORT_RSA) { + ret = serial8250_request_rsa_resource(up); + if (ret < 0) + serial8250_release_std_resource(up); + } + + return ret; +} + +static void serial8250_config_port(struct uart_port *port, int flags) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + int probeflags = PROBE_ANY; + int ret; + + /* + * Find the region that we can probe for. This in turn + * tells us whether we can probe for the type of port. + */ + ret = serial8250_request_std_resource(up); + if (ret < 0) + return; + + ret = serial8250_request_rsa_resource(up); + if (ret < 0) + probeflags &= ~PROBE_RSA; + + if (up->port.iotype != up->cur_iotype) + set_io_from_upio(port); + + if (flags & UART_CONFIG_TYPE) + autoconfig(up, probeflags); + + /* if access method is AU, it is a 16550 with a quirk */ + if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) + up->bugs |= UART_BUG_NOMSR; + + if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) + autoconfig_irq(up); + + if (up->port.type != PORT_RSA && probeflags & PROBE_RSA) + serial8250_release_rsa_resource(up); + if (up->port.type == PORT_UNKNOWN) + serial8250_release_std_resource(up); +} + +static int +serial8250_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->irq >= nr_irqs || ser->irq < 0 || + ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || + ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS || + ser->type == PORT_STARTECH) + return -EINVAL; + return 0; +} + +static const char * +serial8250_type(struct uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static struct uart_ops serial8250_pops = { + .tx_empty = serial8250_tx_empty, + .set_mctrl = serial8250_set_mctrl, + .get_mctrl = serial8250_get_mctrl, + .stop_tx = serial8250_stop_tx, + .start_tx = serial8250_start_tx, + .stop_rx = serial8250_stop_rx, + .enable_ms = serial8250_enable_ms, + .break_ctl = serial8250_break_ctl, + .startup = serial8250_startup, + .shutdown = serial8250_shutdown, + .set_termios = serial8250_set_termios, + .set_ldisc = serial8250_set_ldisc, + .pm = serial8250_pm, + .type = serial8250_type, + .release_port = serial8250_release_port, + .request_port = serial8250_request_port, + .config_port = serial8250_config_port, + .verify_port = serial8250_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = serial8250_get_poll_char, + .poll_put_char = serial8250_put_poll_char, +#endif +}; + +static struct uart_8250_port serial8250_ports[UART_NR]; + +static void (*serial8250_isa_config)(int port, struct uart_port *up, + unsigned short *capabilities); + +void serial8250_set_isa_configurator( + void (*v)(int port, struct uart_port *up, unsigned short *capabilities)) +{ + serial8250_isa_config = v; +} +EXPORT_SYMBOL(serial8250_set_isa_configurator); + +static void __init serial8250_isa_init_ports(void) +{ + struct uart_8250_port *up; + static int first = 1; + int i, irqflag = 0; + + if (!first) + return; + first = 0; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + up->port.line = i; + spin_lock_init(&up->port.lock); + + init_timer(&up->timer); + up->timer.function = serial8250_timeout; + + /* + * ALPHA_KLUDGE_MCR needs to be killed. + */ + up->mcr_mask = ~ALPHA_KLUDGE_MCR; + up->mcr_force = ALPHA_KLUDGE_MCR; + + up->port.ops = &serial8250_pops; + } + + if (share_irqs) + irqflag = IRQF_SHARED; + + for (i = 0, up = serial8250_ports; + i < ARRAY_SIZE(old_serial_port) && i < nr_uarts; + i++, up++) { + up->port.iobase = old_serial_port[i].port; + up->port.irq = irq_canonicalize(old_serial_port[i].irq); + up->port.irqflags = old_serial_port[i].irqflags; + up->port.uartclk = old_serial_port[i].baud_base * 16; + up->port.flags = old_serial_port[i].flags; + up->port.hub6 = old_serial_port[i].hub6; + up->port.membase = old_serial_port[i].iomem_base; + up->port.iotype = old_serial_port[i].io_type; + up->port.regshift = old_serial_port[i].iomem_reg_shift; + set_io_from_upio(&up->port); + up->port.irqflags |= irqflag; + if (serial8250_isa_config != NULL) + serial8250_isa_config(i, &up->port, &up->capabilities); + + } +} + +static void +serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type) +{ + up->port.type = type; + up->port.fifosize = uart_config[type].fifo_size; + up->capabilities = uart_config[type].flags; + up->tx_loadsz = uart_config[type].tx_loadsz; +} + +static void __init +serial8250_register_ports(struct uart_driver *drv, struct device *dev) +{ + int i; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + up->cur_iotype = 0xFF; + } + + serial8250_isa_init_ports(); + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + up->port.dev = dev; + + if (up->port.flags & UPF_FIXED_TYPE) + serial8250_init_fixed_type_port(up, up->port.type); + + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE + +static void serial8250_console_putchar(struct uart_port *port, int ch) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + wait_for_xmitr(up, UART_LSR_THRE); + serial_out(up, UART_TX, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial8250_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_8250_port *up = &serial8250_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + touch_nmi_watchdog(); + + local_irq_save(flags); + if (up->port.sysrq) { + /* serial8250_handle_port() already took the lock */ + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); + } else + spin_lock(&up->port.lock); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + + if (up->capabilities & UART_CAP_UUE) + serial_out(up, UART_IER, UART_IER_UUE); + else + serial_out(up, UART_IER, 0); + + uart_console_write(&up->port, s, count, serial8250_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up, BOTH_EMPTY); + serial_out(up, UART_IER, ier); + + /* + * The receive handling will happen properly because the + * receive ready bit will still be set; it is not cleared + * on read. However, modem control will not, we must + * call it if we have saved something in the saved flags + * while processing with interrupts off. + */ + if (up->msr_saved_flags) + check_modem_status(up); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static int __init serial8250_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= nr_uarts) + co->index = 0; + port = &serial8250_ports[co->index].port; + if (!port->iobase && !port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static int serial8250_console_early_setup(void) +{ + return serial8250_find_port_for_earlycon(); +} + +static struct console serial8250_console = { + .name = "ttyS", + .write = serial8250_console_write, + .device = uart_console_device, + .setup = serial8250_console_setup, + .early_setup = serial8250_console_early_setup, + .flags = CON_PRINTBUFFER | CON_ANYTIME, + .index = -1, + .data = &serial8250_reg, +}; + +static int __init serial8250_console_init(void) +{ + if (nr_uarts > UART_NR) + nr_uarts = UART_NR; + + serial8250_isa_init_ports(); + register_console(&serial8250_console); + return 0; +} +console_initcall(serial8250_console_init); + +int serial8250_find_port(struct uart_port *p) +{ + int line; + struct uart_port *port; + + for (line = 0; line < nr_uarts; line++) { + port = &serial8250_ports[line].port; + if (uart_match_port(p, port)) + return line; + } + return -ENODEV; +} + +#define SERIAL8250_CONSOLE &serial8250_console +#else +#define SERIAL8250_CONSOLE NULL +#endif + +static struct uart_driver serial8250_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .cons = SERIAL8250_CONSOLE, +}; + +/* + * early_serial_setup - early registration for 8250 ports + * + * Setup an 8250 port structure prior to console initialisation. Use + * after console initialisation will cause undefined behaviour. + */ +int __init early_serial_setup(struct uart_port *port) +{ + struct uart_port *p; + + if (port->line >= ARRAY_SIZE(serial8250_ports)) + return -ENODEV; + + serial8250_isa_init_ports(); + p = &serial8250_ports[port->line].port; + p->iobase = port->iobase; + p->membase = port->membase; + p->irq = port->irq; + p->irqflags = port->irqflags; + p->uartclk = port->uartclk; + p->fifosize = port->fifosize; + p->regshift = port->regshift; + p->iotype = port->iotype; + p->flags = port->flags; + p->mapbase = port->mapbase; + p->private_data = port->private_data; + p->type = port->type; + p->line = port->line; + + set_io_from_upio(p); + if (port->serial_in) + p->serial_in = port->serial_in; + if (port->serial_out) + p->serial_out = port->serial_out; + + return 0; +} + +/** + * serial8250_suspend_port - suspend one serial port + * @line: serial line number + * + * Suspend one serial port. + */ +void serial8250_suspend_port(int line) +{ + uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port); +} + +/** + * serial8250_resume_port - resume one serial port + * @line: serial line number + * + * Resume one serial port. + */ +void serial8250_resume_port(int line) +{ + struct uart_8250_port *up = &serial8250_ports[line]; + + if (up->capabilities & UART_NATSEMI) { + unsigned char tmp; + + /* Ensure it's still in high speed mode */ + serial_outp(up, UART_LCR, 0xE0); + + tmp = serial_in(up, 0x04); /* EXCR2 */ + tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ + tmp |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ + serial_outp(up, 0x04, tmp); + + serial_outp(up, UART_LCR, 0); + } + uart_resume_port(&serial8250_reg, &up->port); +} + +/* + * Register a set of serial devices attached to a platform device. The + * list is terminated with a zero flags entry, which means we expect + * all entries to have at least UPF_BOOT_AUTOCONF set. + */ +static int __devinit serial8250_probe(struct platform_device *dev) +{ + struct plat_serial8250_port *p = dev->dev.platform_data; + struct uart_port port; + int ret, i, irqflag = 0; + + memset(&port, 0, sizeof(struct uart_port)); + + if (share_irqs) + irqflag = IRQF_SHARED; + + for (i = 0; p && p->flags != 0; p++, i++) { + port.iobase = p->iobase; + port.membase = p->membase; + port.irq = p->irq; + port.irqflags = p->irqflags; + port.uartclk = p->uartclk; + port.regshift = p->regshift; + port.iotype = p->iotype; + port.flags = p->flags; + port.mapbase = p->mapbase; + port.hub6 = p->hub6; + port.private_data = p->private_data; + port.type = p->type; + port.serial_in = p->serial_in; + port.serial_out = p->serial_out; + port.set_termios = p->set_termios; + port.pm = p->pm; + port.dev = &dev->dev; + port.irqflags |= irqflag; + ret = serial8250_register_port(&port); + if (ret < 0) { + dev_err(&dev->dev, "unable to register port at index %d " + "(IO%lx MEM%llx IRQ%d): %d\n", i, + p->iobase, (unsigned long long)p->mapbase, + p->irq, ret); + } + } + return 0; +} + +/* + * Remove serial ports registered against a platform device. + */ +static int __devexit serial8250_remove(struct platform_device *dev) +{ + int i; + + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.dev == &dev->dev) + serial8250_unregister_port(i); + } + return 0; +} + +static int serial8250_suspend(struct platform_device *dev, pm_message_t state) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + uart_suspend_port(&serial8250_reg, &up->port); + } + + return 0; +} + +static int serial8250_resume(struct platform_device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + serial8250_resume_port(i); + } + + return 0; +} + +static struct platform_driver serial8250_isa_driver = { + .probe = serial8250_probe, + .remove = __devexit_p(serial8250_remove), + .suspend = serial8250_suspend, + .resume = serial8250_resume, + .driver = { + .name = "serial8250", + .owner = THIS_MODULE, + }, +}; + +/* + * This "device" covers _all_ ISA 8250-compatible serial devices listed + * in the table in include/asm/serial.h + */ +static struct platform_device *serial8250_isa_devs; + +/* + * serial8250_register_port and serial8250_unregister_port allows for + * 16x50 serial ports to be configured at run-time, to support PCMCIA + * modems and PCI multiport cards. + */ +static DEFINE_MUTEX(serial_mutex); + +static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port) +{ + int i; + + /* + * First, find a port entry which matches. + */ + for (i = 0; i < nr_uarts; i++) + if (uart_match_port(&serial8250_ports[i].port, port)) + return &serial8250_ports[i]; + + /* + * We didn't find a matching entry, so look for the first + * free entry. We look for one which hasn't been previously + * used (indicated by zero iobase). + */ + for (i = 0; i < nr_uarts; i++) + if (serial8250_ports[i].port.type == PORT_UNKNOWN && + serial8250_ports[i].port.iobase == 0) + return &serial8250_ports[i]; + + /* + * That also failed. Last resort is to find any entry which + * doesn't have a real port associated with it. + */ + for (i = 0; i < nr_uarts; i++) + if (serial8250_ports[i].port.type == PORT_UNKNOWN) + return &serial8250_ports[i]; + + return NULL; +} + +/** + * serial8250_register_port - register a serial port + * @port: serial port template + * + * Configure the serial port specified by the request. If the + * port exists and is in use, it is hung up and unregistered + * first. + * + * The port is then probed and if necessary the IRQ is autodetected + * If this fails an error is returned. + * + * On success the port is ready to use and the line number is returned. + */ +int serial8250_register_port(struct uart_port *port) +{ + struct uart_8250_port *uart; + int ret = -ENOSPC; + + if (port->uartclk == 0) + return -EINVAL; + + mutex_lock(&serial_mutex); + + uart = serial8250_find_match_or_unused(port); + if (uart) { + uart_remove_one_port(&serial8250_reg, &uart->port); + + uart->port.iobase = port->iobase; + uart->port.membase = port->membase; + uart->port.irq = port->irq; + uart->port.irqflags = port->irqflags; + uart->port.uartclk = port->uartclk; + uart->port.fifosize = port->fifosize; + uart->port.regshift = port->regshift; + uart->port.iotype = port->iotype; + uart->port.flags = port->flags | UPF_BOOT_AUTOCONF; + uart->port.mapbase = port->mapbase; + uart->port.private_data = port->private_data; + if (port->dev) + uart->port.dev = port->dev; + + if (port->flags & UPF_FIXED_TYPE) + serial8250_init_fixed_type_port(uart, port->type); + + set_io_from_upio(&uart->port); + /* Possibly override default I/O functions. */ + if (port->serial_in) + uart->port.serial_in = port->serial_in; + if (port->serial_out) + uart->port.serial_out = port->serial_out; + /* Possibly override set_termios call */ + if (port->set_termios) + uart->port.set_termios = port->set_termios; + if (port->pm) + uart->port.pm = port->pm; + + if (serial8250_isa_config != NULL) + serial8250_isa_config(0, &uart->port, + &uart->capabilities); + + ret = uart_add_one_port(&serial8250_reg, &uart->port); + if (ret == 0) + ret = uart->port.line; + } + mutex_unlock(&serial_mutex); + + return ret; +} +EXPORT_SYMBOL(serial8250_register_port); + +/** + * serial8250_unregister_port - remove a 16x50 serial port at runtime + * @line: serial line number + * + * Remove one serial port. This may not be called from interrupt + * context. We hand the port back to the our control. + */ +void serial8250_unregister_port(int line) +{ + struct uart_8250_port *uart = &serial8250_ports[line]; + + mutex_lock(&serial_mutex); + uart_remove_one_port(&serial8250_reg, &uart->port); + if (serial8250_isa_devs) { + uart->port.flags &= ~UPF_BOOT_AUTOCONF; + uart->port.type = PORT_UNKNOWN; + uart->port.dev = &serial8250_isa_devs->dev; + uart_add_one_port(&serial8250_reg, &uart->port); + } else { + uart->port.dev = NULL; + } + mutex_unlock(&serial_mutex); +} +EXPORT_SYMBOL(serial8250_unregister_port); + +static int __init serial8250_init(void) +{ + int ret; + + if (nr_uarts > UART_NR) + nr_uarts = UART_NR; + + printk(KERN_INFO "Serial: 8250/16550 driver, " + "%d ports, IRQ sharing %sabled\n", nr_uarts, + share_irqs ? "en" : "dis"); + +#ifdef CONFIG_SPARC + ret = sunserial_register_minors(&serial8250_reg, UART_NR); +#else + serial8250_reg.nr = UART_NR; + ret = uart_register_driver(&serial8250_reg); +#endif + if (ret) + goto out; + + serial8250_isa_devs = platform_device_alloc("serial8250", + PLAT8250_DEV_LEGACY); + if (!serial8250_isa_devs) { + ret = -ENOMEM; + goto unreg_uart_drv; + } + + ret = platform_device_add(serial8250_isa_devs); + if (ret) + goto put_dev; + + serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev); + + ret = platform_driver_register(&serial8250_isa_driver); + if (ret == 0) + goto out; + + platform_device_del(serial8250_isa_devs); +put_dev: + platform_device_put(serial8250_isa_devs); +unreg_uart_drv: +#ifdef CONFIG_SPARC + sunserial_unregister_minors(&serial8250_reg, UART_NR); +#else + uart_unregister_driver(&serial8250_reg); +#endif +out: + return ret; +} + +static void __exit serial8250_exit(void) +{ + struct platform_device *isa_dev = serial8250_isa_devs; + + /* + * This tells serial8250_unregister_port() not to re-register + * the ports (thereby making serial8250_isa_driver permanently + * in use.) + */ + serial8250_isa_devs = NULL; + + platform_driver_unregister(&serial8250_isa_driver); + platform_device_unregister(isa_dev); + +#ifdef CONFIG_SPARC + sunserial_unregister_minors(&serial8250_reg, UART_NR); +#else + uart_unregister_driver(&serial8250_reg); +#endif +} + +module_init(serial8250_init); +module_exit(serial8250_exit); + +EXPORT_SYMBOL(serial8250_suspend_port); +EXPORT_SYMBOL(serial8250_resume_port); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 serial driver"); + +module_param(share_irqs, uint, 0644); +MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices" + " (unsafe)"); + +module_param(nr_uarts, uint, 0644); +MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")"); + +module_param(skip_txen_test, uint, 0644); +MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time"); + +#ifdef CONFIG_SERIAL_8250_RSA +module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); +MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); +#endif +MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); diff --git a/drivers/tty/serial/8250.h b/drivers/tty/serial/8250.h new file mode 100644 index 000000000000..6e19ea3e48d5 --- /dev/null +++ b/drivers/tty/serial/8250.h @@ -0,0 +1,80 @@ +/* + * linux/drivers/char/8250.h + * + * Driver for 8250/16550-type serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include + +struct old_serial_port { + unsigned int uart; + unsigned int baud_base; + unsigned int port; + unsigned int irq; + unsigned int flags; + unsigned char hub6; + unsigned char io_type; + unsigned char *iomem_base; + unsigned short iomem_reg_shift; + unsigned long irqflags; +}; + +/* + * This replaces serial_uart_config in include/linux/serial.h + */ +struct serial8250_config { + const char *name; + unsigned short fifo_size; + unsigned short tx_loadsz; + unsigned char fcr; + unsigned int flags; +}; + +#define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ +#define UART_CAP_EFR (1 << 9) /* UART has EFR */ +#define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */ +#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ +#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ + +#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ +#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ +#define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ +#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ + +#define PROBE_RSA (1 << 0) +#define PROBE_ANY (~0) + +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) + +#ifdef CONFIG_SERIAL_8250_SHARE_IRQ +#define SERIAL8250_SHARE_IRQS 1 +#else +#define SERIAL8250_SHARE_IRQS 0 +#endif + +#if defined(__alpha__) && !defined(CONFIG_PCI) +/* + * Digital did something really horribly wrong with the OUT1 and OUT2 + * lines on at least some ALPHA's. The failure mode is that if either + * is cleared, the machine locks up with endless interrupts. + */ +#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1) +#elif defined(CONFIG_SBC8560) +/* + * WindRiver did something similarly broken on their SBC8560 board. The + * UART tristates its IRQ output while OUT2 is clear, but they pulled + * the interrupt line _up_ instead of down, so if we register the IRQ + * while the UART is in that state, we die in an IRQ storm. */ +#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) +#else +#define ALPHA_KLUDGE_MCR 0 +#endif diff --git a/drivers/tty/serial/8250_accent.c b/drivers/tty/serial/8250_accent.c new file mode 100644 index 000000000000..9c10262f2469 --- /dev/null +++ b/drivers/tty/serial/8250_accent.c @@ -0,0 +1,47 @@ +/* + * linux/drivers/serial/8250_accent.c + * + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port accent_data[] = { + PORT(0x330, 4), + PORT(0x338, 4), + { }, +}; + +static struct platform_device accent_device = { + .name = "serial8250", + .id = PLAT8250_DEV_ACCENT, + .dev = { + .platform_data = accent_data, + }, +}; + +static int __init accent_init(void) +{ + return platform_device_register(&accent_device); +} + +module_init(accent_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for Accent Async cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_acorn.c b/drivers/tty/serial/8250_acorn.c new file mode 100644 index 000000000000..b0ce8c56f1a4 --- /dev/null +++ b/drivers/tty/serial/8250_acorn.c @@ -0,0 +1,141 @@ +/* + * linux/drivers/serial/acorn.c + * + * Copyright (C) 1996-2003 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "8250.h" + +#define MAX_PORTS 3 + +struct serial_card_type { + unsigned int num_ports; + unsigned int uartclk; + unsigned int type; + unsigned int offset[MAX_PORTS]; +}; + +struct serial_card_info { + unsigned int num_ports; + int ports[MAX_PORTS]; + void __iomem *vaddr; +}; + +static int __devinit +serial_card_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + struct serial_card_info *info; + struct serial_card_type *type = id->data; + struct uart_port port; + unsigned long bus_addr; + unsigned int i; + + info = kzalloc(sizeof(struct serial_card_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->num_ports = type->num_ports; + + bus_addr = ecard_resource_start(ec, type->type); + info->vaddr = ecardm_iomap(ec, type->type, 0, 0); + if (!info->vaddr) { + kfree(info); + return -ENOMEM; + } + + ecard_set_drvdata(ec, info); + + memset(&port, 0, sizeof(struct uart_port)); + port.irq = ec->irq; + port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + port.uartclk = type->uartclk; + port.iotype = UPIO_MEM; + port.regshift = 2; + port.dev = &ec->dev; + + for (i = 0; i < info->num_ports; i ++) { + port.membase = info->vaddr + type->offset[i]; + port.mapbase = bus_addr + type->offset[i]; + + info->ports[i] = serial8250_register_port(&port); + } + + return 0; +} + +static void __devexit serial_card_remove(struct expansion_card *ec) +{ + struct serial_card_info *info = ecard_get_drvdata(ec); + int i; + + ecard_set_drvdata(ec, NULL); + + for (i = 0; i < info->num_ports; i++) + if (info->ports[i] > 0) + serial8250_unregister_port(info->ports[i]); + + kfree(info); +} + +static struct serial_card_type atomwide_type = { + .num_ports = 3, + .uartclk = 7372800, + .type = ECARD_RES_IOCSLOW, + .offset = { 0x2800, 0x2400, 0x2000 }, +}; + +static struct serial_card_type serport_type = { + .num_ports = 2, + .uartclk = 3686400, + .type = ECARD_RES_IOCSLOW, + .offset = { 0x2000, 0x2020 }, +}; + +static const struct ecard_id serial_cids[] = { + { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, &atomwide_type }, + { MANU_SERPORT, PROD_SERPORT_DSPORT, &serport_type }, + { 0xffff, 0xffff } +}; + +static struct ecard_driver serial_card_driver = { + .probe = serial_card_probe, + .remove = __devexit_p(serial_card_remove), + .id_table = serial_cids, + .drv = { + .name = "8250_acorn", + }, +}; + +static int __init serial_card_init(void) +{ + return ecard_register_driver(&serial_card_driver); +} + +static void __exit serial_card_exit(void) +{ + ecard_remove_driver(&serial_card_driver); +} + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("Acorn 8250-compatible serial port expansion card driver"); +MODULE_LICENSE("GPL"); + +module_init(serial_card_init); +module_exit(serial_card_exit); diff --git a/drivers/tty/serial/8250_boca.c b/drivers/tty/serial/8250_boca.c new file mode 100644 index 000000000000..3bfe0f7b26fb --- /dev/null +++ b/drivers/tty/serial/8250_boca.c @@ -0,0 +1,61 @@ +/* + * linux/drivers/serial/8250_boca.c + * + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port boca_data[] = { + PORT(0x100, 12), + PORT(0x108, 12), + PORT(0x110, 12), + PORT(0x118, 12), + PORT(0x120, 12), + PORT(0x128, 12), + PORT(0x130, 12), + PORT(0x138, 12), + PORT(0x140, 12), + PORT(0x148, 12), + PORT(0x150, 12), + PORT(0x158, 12), + PORT(0x160, 12), + PORT(0x168, 12), + PORT(0x170, 12), + PORT(0x178, 12), + { }, +}; + +static struct platform_device boca_device = { + .name = "serial8250", + .id = PLAT8250_DEV_BOCA, + .dev = { + .platform_data = boca_data, + }, +}; + +static int __init boca_init(void) +{ + return platform_device_register(&boca_device); +} + +module_init(boca_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for Boca cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_early.c b/drivers/tty/serial/8250_early.c new file mode 100644 index 000000000000..eaafb98debed --- /dev/null +++ b/drivers/tty/serial/8250_early.c @@ -0,0 +1,287 @@ +/* + * Early serial console for 8250/16550 devices + * + * (c) Copyright 2004 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on the 8250.c serial driver, Copyright (C) 2001 Russell King, + * and on early_printk.c by Andi Kleen. + * + * This is for use before the serial driver has initialized, in + * particular, before the UARTs have been discovered and named. + * Instead of specifying the console device as, e.g., "ttyS0", + * we locate the device directly by its MMIO or I/O port address. + * + * The user can specify the device directly, e.g., + * earlycon=uart8250,io,0x3f8,9600n8 + * earlycon=uart8250,mmio,0xff5e0000,115200n8 + * earlycon=uart8250,mmio32,0xff5e0000,115200n8 + * or + * console=uart8250,io,0x3f8,9600n8 + * console=uart8250,mmio,0xff5e0000,115200n8 + * console=uart8250,mmio32,0xff5e0000,115200n8 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_FIX_EARLYCON_MEM +#include +#include +#endif + +struct early_serial8250_device { + struct uart_port port; + char options[16]; /* e.g., 115200n8 */ + unsigned int baud; +}; + +static struct early_serial8250_device early_device; + +static unsigned int __init serial_in(struct uart_port *port, int offset) +{ + switch (port->iotype) { + case UPIO_MEM: + return readb(port->membase + offset); + case UPIO_MEM32: + return readl(port->membase + (offset << 2)); + case UPIO_PORT: + return inb(port->iobase + offset); + default: + return 0; + } +} + +static void __init serial_out(struct uart_port *port, int offset, int value) +{ + switch (port->iotype) { + case UPIO_MEM: + writeb(value, port->membase + offset); + break; + case UPIO_MEM32: + writel(value, port->membase + (offset << 2)); + break; + case UPIO_PORT: + outb(value, port->iobase + offset); + break; + } +} + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static void __init wait_for_xmitr(struct uart_port *port) +{ + unsigned int status; + + for (;;) { + status = serial_in(port, UART_LSR); + if ((status & BOTH_EMPTY) == BOTH_EMPTY) + return; + cpu_relax(); + } +} + +static void __init serial_putc(struct uart_port *port, int c) +{ + wait_for_xmitr(port); + serial_out(port, UART_TX, c); +} + +static void __init early_serial8250_write(struct console *console, + const char *s, unsigned int count) +{ + struct uart_port *port = &early_device.port; + unsigned int ier; + + /* Save the IER and disable interrupts */ + ier = serial_in(port, UART_IER); + serial_out(port, UART_IER, 0); + + uart_console_write(port, s, count, serial_putc); + + /* Wait for transmitter to become empty and restore the IER */ + wait_for_xmitr(port); + serial_out(port, UART_IER, ier); +} + +static unsigned int __init probe_baud(struct uart_port *port) +{ + unsigned char lcr, dll, dlm; + unsigned int quot; + + lcr = serial_in(port, UART_LCR); + serial_out(port, UART_LCR, lcr | UART_LCR_DLAB); + dll = serial_in(port, UART_DLL); + dlm = serial_in(port, UART_DLM); + serial_out(port, UART_LCR, lcr); + + quot = (dlm << 8) | dll; + return (port->uartclk / 16) / quot; +} + +static void __init init_port(struct early_serial8250_device *device) +{ + struct uart_port *port = &device->port; + unsigned int divisor; + unsigned char c; + + serial_out(port, UART_LCR, 0x3); /* 8n1 */ + serial_out(port, UART_IER, 0); /* no interrupt */ + serial_out(port, UART_FCR, 0); /* no fifo */ + serial_out(port, UART_MCR, 0x3); /* DTR + RTS */ + + divisor = port->uartclk / (16 * device->baud); + c = serial_in(port, UART_LCR); + serial_out(port, UART_LCR, c | UART_LCR_DLAB); + serial_out(port, UART_DLL, divisor & 0xff); + serial_out(port, UART_DLM, (divisor >> 8) & 0xff); + serial_out(port, UART_LCR, c & ~UART_LCR_DLAB); +} + +static int __init parse_options(struct early_serial8250_device *device, + char *options) +{ + struct uart_port *port = &device->port; + int mmio, mmio32, length; + + if (!options) + return -ENODEV; + + port->uartclk = BASE_BAUD * 16; + + mmio = !strncmp(options, "mmio,", 5); + mmio32 = !strncmp(options, "mmio32,", 7); + if (mmio || mmio32) { + port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32); + port->mapbase = simple_strtoul(options + (mmio ? 5 : 7), + &options, 0); + if (mmio32) + port->regshift = 2; +#ifdef CONFIG_FIX_EARLYCON_MEM + set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, + port->mapbase & PAGE_MASK); + port->membase = + (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); + port->membase += port->mapbase & ~PAGE_MASK; +#else + port->membase = ioremap_nocache(port->mapbase, 64); + if (!port->membase) { + printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n", + __func__, + (unsigned long long) port->mapbase); + return -ENOMEM; + } +#endif + } else if (!strncmp(options, "io,", 3)) { + port->iotype = UPIO_PORT; + port->iobase = simple_strtoul(options + 3, &options, 0); + mmio = 0; + } else + return -EINVAL; + + options = strchr(options, ','); + if (options) { + options++; + device->baud = simple_strtoul(options, NULL, 0); + length = min(strcspn(options, " "), sizeof(device->options)); + strncpy(device->options, options, length); + } else { + device->baud = probe_baud(port); + snprintf(device->options, sizeof(device->options), "%u", + device->baud); + } + + if (mmio || mmio32) + printk(KERN_INFO + "Early serial console at MMIO%s 0x%llx (options '%s')\n", + mmio32 ? "32" : "", + (unsigned long long)port->mapbase, + device->options); + else + printk(KERN_INFO + "Early serial console at I/O port 0x%lx (options '%s')\n", + port->iobase, + device->options); + + return 0; +} + +static struct console early_serial8250_console __initdata = { + .name = "uart", + .write = early_serial8250_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1, +}; + +static int __init early_serial8250_setup(char *options) +{ + struct early_serial8250_device *device = &early_device; + int err; + + if (device->port.membase || device->port.iobase) + return 0; + + err = parse_options(device, options); + if (err < 0) + return err; + + init_port(device); + return 0; +} + +int __init setup_early_serial8250_console(char *cmdline) +{ + char *options; + int err; + + options = strstr(cmdline, "uart8250,"); + if (!options) { + options = strstr(cmdline, "uart,"); + if (!options) + return 0; + } + + options = strchr(cmdline, ',') + 1; + err = early_serial8250_setup(options); + if (err < 0) + return err; + + register_console(&early_serial8250_console); + + return 0; +} + +int serial8250_find_port_for_earlycon(void) +{ + struct early_serial8250_device *device = &early_device; + struct uart_port *port = &device->port; + int line; + int ret; + + if (!device->port.membase && !device->port.iobase) + return -ENODEV; + + line = serial8250_find_port(port); + if (line < 0) + return -ENODEV; + + ret = update_console_cmdline("uart", 8250, + "ttyS", line, device->options); + if (ret < 0) + ret = update_console_cmdline("uart", 0, + "ttyS", line, device->options); + + return ret; +} + +early_param("earlycon", setup_early_serial8250_console); diff --git a/drivers/tty/serial/8250_exar_st16c554.c b/drivers/tty/serial/8250_exar_st16c554.c new file mode 100644 index 000000000000..567143ace159 --- /dev/null +++ b/drivers/tty/serial/8250_exar_st16c554.c @@ -0,0 +1,52 @@ +/* + * linux/drivers/serial/8250_exar.c + * + * Written by Paul B Schroeder < pschroeder "at" uplogix "dot" com > + * Based on 8250_boca. + * + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port exar_data[] = { + PORT(0x100, 5), + PORT(0x108, 5), + PORT(0x110, 5), + PORT(0x118, 5), + { }, +}; + +static struct platform_device exar_device = { + .name = "serial8250", + .id = PLAT8250_DEV_EXAR_ST16C554, + .dev = { + .platform_data = exar_data, + }, +}; + +static int __init exar_init(void) +{ + return platform_device_register(&exar_device); +} + +module_init(exar_init); + +MODULE_AUTHOR("Paul B Schroeder"); +MODULE_DESCRIPTION("8250 serial probe module for Exar cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_fourport.c b/drivers/tty/serial/8250_fourport.c new file mode 100644 index 000000000000..6375d68b7913 --- /dev/null +++ b/drivers/tty/serial/8250_fourport.c @@ -0,0 +1,53 @@ +/* + * linux/drivers/serial/8250_fourport.c + * + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF | UPF_FOURPORT, \ + } + +static struct plat_serial8250_port fourport_data[] = { + PORT(0x1a0, 9), + PORT(0x1a8, 9), + PORT(0x1b0, 9), + PORT(0x1b8, 9), + PORT(0x2a0, 5), + PORT(0x2a8, 5), + PORT(0x2b0, 5), + PORT(0x2b8, 5), + { }, +}; + +static struct platform_device fourport_device = { + .name = "serial8250", + .id = PLAT8250_DEV_FOURPORT, + .dev = { + .platform_data = fourport_data, + }, +}; + +static int __init fourport_init(void) +{ + return platform_device_register(&fourport_device); +} + +module_init(fourport_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for AST Fourport cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_gsc.c b/drivers/tty/serial/8250_gsc.c new file mode 100644 index 000000000000..d8c0ffbfa6e3 --- /dev/null +++ b/drivers/tty/serial/8250_gsc.c @@ -0,0 +1,122 @@ +/* + * Serial Device Initialisation for Lasi/Asp/Wax/Dino + * + * (c) Copyright Matthew Wilcox 2001-2002 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "8250.h" + +static int __init serial_init_chip(struct parisc_device *dev) +{ + struct uart_port port; + unsigned long address; + int err; + + if (!dev->irq) { + /* We find some unattached serial ports by walking native + * busses. These should be silently ignored. Otherwise, + * what we have here is a missing parent device, so tell + * the user what they're missing. + */ + if (parisc_parent(dev)->id.hw_type != HPHW_IOA) + printk(KERN_INFO + "Serial: device 0x%llx not configured.\n" + "Enable support for Wax, Lasi, Asp or Dino.\n", + (unsigned long long)dev->hpa.start); + return -ENODEV; + } + + address = dev->hpa.start; + if (dev->id.sversion != 0x8d) + address += 0x800; + + memset(&port, 0, sizeof(port)); + port.iotype = UPIO_MEM; + /* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */ + port.uartclk = 7272727; + port.mapbase = address; + port.membase = ioremap_nocache(address, 16); + port.irq = dev->irq; + port.flags = UPF_BOOT_AUTOCONF; + port.dev = &dev->dev; + + err = serial8250_register_port(&port); + if (err < 0) { + printk(KERN_WARNING + "serial8250_register_port returned error %d\n", err); + iounmap(port.membase); + return err; + } + + return 0; +} + +static struct parisc_device_id serial_tbl[] = { + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d }, + { 0 } +}; + +/* Hack. Some machines have SERIAL_0 attached to Lasi and SERIAL_1 + * attached to Dino. Unfortunately, Dino appears before Lasi in the device + * tree. To ensure that ttyS0 == SERIAL_0, we register two drivers; one + * which only knows about Lasi and then a second which will find all the + * other serial ports. HPUX ignores this problem. + */ +static struct parisc_device_id lasi_tbl[] = { + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03B, 0x0008C }, /* C1xx/C1xxL */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03C, 0x0008C }, /* B132L */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03D, 0x0008C }, /* B160L */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03E, 0x0008C }, /* B132L+ */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03F, 0x0008C }, /* B180L+ */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x046, 0x0008C }, /* Rocky2 120 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x047, 0x0008C }, /* Rocky2 150 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x04E, 0x0008C }, /* Kiji L2 132 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x056, 0x0008C }, /* Raven+ */ + { 0 } +}; + + +MODULE_DEVICE_TABLE(parisc, serial_tbl); + +static struct parisc_driver lasi_driver = { + .name = "serial_1", + .id_table = lasi_tbl, + .probe = serial_init_chip, +}; + +static struct parisc_driver serial_driver = { + .name = "serial", + .id_table = serial_tbl, + .probe = serial_init_chip, +}; + +static int __init probe_serial_gsc(void) +{ + register_parisc_driver(&lasi_driver); + register_parisc_driver(&serial_driver); + return 0; +} + +module_init(probe_serial_gsc); + +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_hp300.c b/drivers/tty/serial/8250_hp300.c new file mode 100644 index 000000000000..c13438c93012 --- /dev/null +++ b/drivers/tty/serial/8250_hp300.c @@ -0,0 +1,327 @@ +/* + * Driver for the 98626/98644/internal serial interface on hp300/hp400 + * (based on the National Semiconductor INS8250/NS16550AF/WD16C552 UARTs) + * + * Ported from 2.2 and modified to use the normal 8250 driver + * by Kars de Jong , May 2004. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +#if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI) +#warning CONFIG_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure? +#endif + +#ifdef CONFIG_HPAPCI +struct hp300_port +{ + struct hp300_port *next; /* next port */ + int line; /* line (tty) number */ +}; + +static struct hp300_port *hp300_ports; +#endif + +#ifdef CONFIG_HPDCA + +static int __devinit hpdca_init_one(struct dio_dev *d, + const struct dio_device_id *ent); +static void __devexit hpdca_remove_one(struct dio_dev *d); + +static struct dio_device_id hpdca_dio_tbl[] = { + { DIO_ID_DCA0 }, + { DIO_ID_DCA0REM }, + { DIO_ID_DCA1 }, + { DIO_ID_DCA1REM }, + { 0 } +}; + +static struct dio_driver hpdca_driver = { + .name = "hpdca", + .id_table = hpdca_dio_tbl, + .probe = hpdca_init_one, + .remove = __devexit_p(hpdca_remove_one), +}; + +#endif + +static unsigned int num_ports; + +extern int hp300_uart_scode; + +/* Offset to UART registers from base of DCA */ +#define UART_OFFSET 17 + +#define DCA_ID 0x01 /* ID (read), reset (write) */ +#define DCA_IC 0x03 /* Interrupt control */ + +/* Interrupt control */ +#define DCA_IC_IE 0x80 /* Master interrupt enable */ + +#define HPDCA_BAUD_BASE 153600 + +/* Base address of the Frodo part */ +#define FRODO_BASE (0x41c000) + +/* + * Where we find the 8250-like APCI ports, and how far apart they are. + */ +#define FRODO_APCIBASE 0x0 +#define FRODO_APCISPACE 0x20 +#define FRODO_APCI_OFFSET(x) (FRODO_APCIBASE + ((x) * FRODO_APCISPACE)) + +#define HPAPCI_BAUD_BASE 500400 + +#ifdef CONFIG_SERIAL_8250_CONSOLE +/* + * Parse the bootinfo to find descriptions for headless console and + * debug serial ports and register them with the 8250 driver. + * This function should be called before serial_console_init() is called + * to make sure the serial console will be available for use. IA-64 kernel + * calls this function from setup_arch() after the EFI and ACPI tables have + * been parsed. + */ +int __init hp300_setup_serial_console(void) +{ + int scode; + struct uart_port port; + + memset(&port, 0, sizeof(port)); + + if (hp300_uart_scode < 0 || hp300_uart_scode > DIO_SCMAX) + return 0; + + if (DIO_SCINHOLE(hp300_uart_scode)) + return 0; + + scode = hp300_uart_scode; + + /* Memory mapped I/O */ + port.iotype = UPIO_MEM; + port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + port.type = PORT_UNKNOWN; + + /* Check for APCI console */ + if (scode == 256) { +#ifdef CONFIG_HPAPCI + printk(KERN_INFO "Serial console is HP APCI 1\n"); + + port.uartclk = HPAPCI_BAUD_BASE * 16; + port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1)); + port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); + port.regshift = 2; + add_preferred_console("ttyS", port.line, "9600n8"); +#else + printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n"); + return 0; +#endif + } else { +#ifdef CONFIG_HPDCA + unsigned long pa = dio_scodetophysaddr(scode); + if (!pa) + return 0; + + printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode); + + port.uartclk = HPDCA_BAUD_BASE * 16; + port.mapbase = (pa + UART_OFFSET); + port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); + port.regshift = 1; + port.irq = DIO_IPL(pa + DIO_VIRADDRBASE); + + /* Enable board-interrupts */ + out_8(pa + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE); + + if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80) + add_preferred_console("ttyS", port.line, "9600n8"); +#else + printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n"); + return 0; +#endif + } + + if (early_serial_setup(&port) < 0) + printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n"); + return 0; +} +#endif /* CONFIG_SERIAL_8250_CONSOLE */ + +#ifdef CONFIG_HPDCA +static int __devinit hpdca_init_one(struct dio_dev *d, + const struct dio_device_id *ent) +{ + struct uart_port port; + int line; + +#ifdef CONFIG_SERIAL_8250_CONSOLE + if (hp300_uart_scode == d->scode) { + /* Already got it. */ + return 0; + } +#endif + memset(&port, 0, sizeof(struct uart_port)); + + /* Memory mapped I/O */ + port.iotype = UPIO_MEM; + port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + port.irq = d->ipl; + port.uartclk = HPDCA_BAUD_BASE * 16; + port.mapbase = (d->resource.start + UART_OFFSET); + port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); + port.regshift = 1; + port.dev = &d->dev; + line = serial8250_register_port(&port); + + if (line < 0) { + printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d" + " irq %d failed\n", d->scode, port.irq); + return -ENOMEM; + } + + /* Enable board-interrupts */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE); + dio_set_drvdata(d, (void *)line); + + /* Reset the DCA */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_ID, 0xff); + udelay(100); + + num_ports++; + + return 0; +} +#endif + +static int __init hp300_8250_init(void) +{ + static int called; +#ifdef CONFIG_HPAPCI + int line; + unsigned long base; + struct uart_port uport; + struct hp300_port *port; + int i; +#endif + if (called) + return -ENODEV; + called = 1; + + if (!MACH_IS_HP300) + return -ENODEV; + +#ifdef CONFIG_HPDCA + dio_register_driver(&hpdca_driver); +#endif +#ifdef CONFIG_HPAPCI + if (hp300_model < HP_400) { + if (!num_ports) + return -ENODEV; + return 0; + } + /* These models have the Frodo chip. + * Port 0 is reserved for the Apollo Domain keyboard. + * Port 1 is either the console or the DCA. + */ + for (i = 1; i < 4; i++) { + /* Port 1 is the console on a 425e, on other machines it's + * mapped to DCA. + */ +#ifdef CONFIG_SERIAL_8250_CONSOLE + if (i == 1) + continue; +#endif + + /* Create new serial device */ + port = kmalloc(sizeof(struct hp300_port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + memset(&uport, 0, sizeof(struct uart_port)); + + base = (FRODO_BASE + FRODO_APCI_OFFSET(i)); + + /* Memory mapped I/O */ + uport.iotype = UPIO_MEM; + uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \ + | UPF_BOOT_AUTOCONF; + /* XXX - no interrupt support yet */ + uport.irq = 0; + uport.uartclk = HPAPCI_BAUD_BASE * 16; + uport.mapbase = base; + uport.membase = (char *)(base + DIO_VIRADDRBASE); + uport.regshift = 2; + + line = serial8250_register_port(&uport); + + if (line < 0) { + printk(KERN_NOTICE "8250_hp300: register_serial() APCI" + " %d irq %d failed\n", i, uport.irq); + kfree(port); + continue; + } + + port->line = line; + port->next = hp300_ports; + hp300_ports = port; + + num_ports++; + } +#endif + + /* Any boards found? */ + if (!num_ports) + return -ENODEV; + + return 0; +} + +#ifdef CONFIG_HPDCA +static void __devexit hpdca_remove_one(struct dio_dev *d) +{ + int line; + + line = (int) dio_get_drvdata(d); + if (d->resource.start) { + /* Disable board-interrupts */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, 0); + } + serial8250_unregister_port(line); +} +#endif + +static void __exit hp300_8250_exit(void) +{ +#ifdef CONFIG_HPAPCI + struct hp300_port *port, *to_free; + + for (port = hp300_ports; port; ) { + serial8250_unregister_port(port->line); + to_free = port; + port = port->next; + kfree(to_free); + } + + hp300_ports = NULL; +#endif +#ifdef CONFIG_HPDCA + dio_unregister_driver(&hpdca_driver); +#endif +} + +module_init(hp300_8250_init); +module_exit(hp300_8250_exit); +MODULE_DESCRIPTION("HP DCA/APCI serial driver"); +MODULE_AUTHOR("Kars de Jong "); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_hub6.c b/drivers/tty/serial/8250_hub6.c new file mode 100644 index 000000000000..7609150e7d5e --- /dev/null +++ b/drivers/tty/serial/8250_hub6.c @@ -0,0 +1,58 @@ +/* + * linux/drivers/serial/8250_hub6.c + * + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#define HUB6(card,port) \ + { \ + .iobase = 0x302, \ + .irq = 3, \ + .uartclk = 1843200, \ + .iotype = UPIO_HUB6, \ + .flags = UPF_BOOT_AUTOCONF, \ + .hub6 = (card) << 6 | (port) << 3 | 1, \ + } + +static struct plat_serial8250_port hub6_data[] = { + HUB6(0, 0), + HUB6(0, 1), + HUB6(0, 2), + HUB6(0, 3), + HUB6(0, 4), + HUB6(0, 5), + HUB6(1, 0), + HUB6(1, 1), + HUB6(1, 2), + HUB6(1, 3), + HUB6(1, 4), + HUB6(1, 5), + { }, +}; + +static struct platform_device hub6_device = { + .name = "serial8250", + .id = PLAT8250_DEV_HUB6, + .dev = { + .platform_data = hub6_data, + }, +}; + +static int __init hub6_init(void) +{ + return platform_device_register(&hub6_device); +} + +module_init(hub6_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for Hub6 cards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_mca.c b/drivers/tty/serial/8250_mca.c new file mode 100644 index 000000000000..d10be944ad44 --- /dev/null +++ b/drivers/tty/serial/8250_mca.c @@ -0,0 +1,63 @@ +/* + * linux/drivers/serial/8250_mca.c + * + * Copyright (C) 2005 Russell King. + * Data taken from include/asm-i386/serial.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include + +/* + * FIXME: Should we be doing AUTO_IRQ here? + */ +#ifdef CONFIG_SERIAL_8250_DETECT_IRQ +#define MCA_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ +#else +#define MCA_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST +#endif + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = MCA_FLAGS, \ + } + +static struct plat_serial8250_port mca_data[] = { + PORT(0x3220, 3), + PORT(0x3228, 3), + PORT(0x4220, 3), + PORT(0x4228, 3), + PORT(0x5220, 3), + PORT(0x5228, 3), + { }, +}; + +static struct platform_device mca_device = { + .name = "serial8250", + .id = PLAT8250_DEV_MCA, + .dev = { + .platform_data = mca_data, + }, +}; + +static int __init mca_init(void) +{ + if (!MCA_bus) + return -ENODEV; + return platform_device_register(&mca_device); +} + +module_init(mca_init); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("8250 serial probe module for MCA ports"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c new file mode 100644 index 000000000000..8b8930f700b5 --- /dev/null +++ b/drivers/tty/serial/8250_pci.c @@ -0,0 +1,3850 @@ +/* + * linux/drivers/char/8250_pci.c + * + * Probe module for 8250/16550-type PCI serial ports. + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "8250.h" + +#undef SERIAL_DEBUG_PCI + +/* + * init function returns: + * > 0 - number of ports + * = 0 - use board->num_ports + * < 0 - error + */ +struct pci_serial_quirk { + u32 vendor; + u32 device; + u32 subvendor; + u32 subdevice; + int (*init)(struct pci_dev *dev); + int (*setup)(struct serial_private *, + const struct pciserial_board *, + struct uart_port *, int); + void (*exit)(struct pci_dev *dev); +}; + +#define PCI_NUM_BAR_RESOURCES 6 + +struct serial_private { + struct pci_dev *dev; + unsigned int nr; + void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES]; + struct pci_serial_quirk *quirk; + int line[0]; +}; + +static void moan_device(const char *str, struct pci_dev *dev) +{ + printk(KERN_WARNING + "%s: %s\n" + "Please send the output of lspci -vv, this\n" + "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" + "manufacturer and name of serial board or\n" + "modem board to rmk+serial@arm.linux.org.uk.\n", + pci_name(dev), str, dev->vendor, dev->device, + dev->subsystem_vendor, dev->subsystem_device); +} + +static int +setup_port(struct serial_private *priv, struct uart_port *port, + int bar, int offset, int regshift) +{ + struct pci_dev *dev = priv->dev; + unsigned long base, len; + + if (bar >= PCI_NUM_BAR_RESOURCES) + return -EINVAL; + + base = pci_resource_start(dev, bar); + + if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { + len = pci_resource_len(dev, bar); + + if (!priv->remapped_bar[bar]) + priv->remapped_bar[bar] = ioremap_nocache(base, len); + if (!priv->remapped_bar[bar]) + return -ENOMEM; + + port->iotype = UPIO_MEM; + port->iobase = 0; + port->mapbase = base + offset; + port->membase = priv->remapped_bar[bar] + offset; + port->regshift = regshift; + } else { + port->iotype = UPIO_PORT; + port->iobase = base + offset; + port->mapbase = 0; + port->membase = NULL; + port->regshift = 0; + } + return 0; +} + +/* + * ADDI-DATA GmbH communication cards + */ +static int addidata_apci7800_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar = 0, offset = board->first_offset; + bar = FL_GET_BASE(board->flags); + + if (idx < 2) { + offset += idx * board->uart_offset; + } else if ((idx >= 2) && (idx < 4)) { + bar += 1; + offset += ((idx - 2) * board->uart_offset); + } else if ((idx >= 4) && (idx < 6)) { + bar += 2; + offset += ((idx - 4) * board->uart_offset); + } else if (idx >= 6) { + bar += 3; + offset += ((idx - 6) * board->uart_offset); + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * AFAVLAB uses a different mixture of BARs and offsets + * Not that ugly ;) -- HW + */ +static int +afavlab_setup(struct serial_private *priv, const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + bar = FL_GET_BASE(board->flags); + if (idx < 4) + bar += idx; + else { + bar = 4; + offset += (idx - 4) * board->uart_offset; + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * HP's Remote Management Console. The Diva chip came in several + * different versions. N-class, L2000 and A500 have two Diva chips, each + * with 3 UARTs (the third UART on the second chip is unused). Superdome + * and Keystone have one Diva chip with 3 UARTs. Some later machines have + * one Diva chip, but it has been expanded to 5 UARTs. + */ +static int pci_hp_diva_init(struct pci_dev *dev) +{ + int rc = 0; + + switch (dev->subsystem_device) { + case PCI_DEVICE_ID_HP_DIVA_TOSCA1: + case PCI_DEVICE_ID_HP_DIVA_HALFDOME: + case PCI_DEVICE_ID_HP_DIVA_KEYSTONE: + case PCI_DEVICE_ID_HP_DIVA_EVEREST: + rc = 3; + break; + case PCI_DEVICE_ID_HP_DIVA_TOSCA2: + rc = 2; + break; + case PCI_DEVICE_ID_HP_DIVA_MAESTRO: + rc = 4; + break; + case PCI_DEVICE_ID_HP_DIVA_POWERBAR: + case PCI_DEVICE_ID_HP_DIVA_HURRICANE: + rc = 1; + break; + } + + return rc; +} + +/* + * HP's Diva chip puts the 4th/5th serial port further out, and + * some serial ports are supposed to be hidden on certain models. + */ +static int +pci_hp_diva_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int offset = board->first_offset; + unsigned int bar = FL_GET_BASE(board->flags); + + switch (priv->dev->subsystem_device) { + case PCI_DEVICE_ID_HP_DIVA_MAESTRO: + if (idx == 3) + idx++; + break; + case PCI_DEVICE_ID_HP_DIVA_EVEREST: + if (idx > 0) + idx++; + if (idx > 2) + idx++; + break; + } + if (idx > 2) + offset = 0x18; + + offset += idx * board->uart_offset; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * Added for EKF Intel i960 serial boards + */ +static int pci_inteli960ni_init(struct pci_dev *dev) +{ + unsigned long oldval; + + if (!(dev->subsystem_device & 0x1000)) + return -ENODEV; + + /* is firmware started? */ + pci_read_config_dword(dev, 0x44, (void *)&oldval); + if (oldval == 0x00001000L) { /* RESET value */ + printk(KERN_DEBUG "Local i960 firmware missing"); + return -ENODEV; + } + return 0; +} + +/* + * Some PCI serial cards using the PLX 9050 PCI interface chip require + * that the card interrupt be explicitly enabled or disabled. This + * seems to be mainly needed on card using the PLX which also use I/O + * mapped memory. + */ +static int pci_plx9050_init(struct pci_dev *dev) +{ + u8 irq_config; + void __iomem *p; + + if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar 0", dev); + return 0; + } + + irq_config = 0x41; + if (dev->vendor == PCI_VENDOR_ID_PANACOM || + dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) + irq_config = 0x43; + + if ((dev->vendor == PCI_VENDOR_ID_PLX) && + (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) + /* + * As the megawolf cards have the int pins active + * high, and have 2 UART chips, both ints must be + * enabled on the 9050. Also, the UARTS are set in + * 16450 mode by default, so we have to enable the + * 16C950 'enhanced' mode so that we can use the + * deep FIFOs + */ + irq_config = 0x5b; + /* + * enable/disable interrupts + */ + p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); + if (p == NULL) + return -ENOMEM; + writel(irq_config, p + 0x4c); + + /* + * Read the register back to ensure that it took effect. + */ + readl(p + 0x4c); + iounmap(p); + + return 0; +} + +static void __devexit pci_plx9050_exit(struct pci_dev *dev) +{ + u8 __iomem *p; + + if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) + return; + + /* + * disable interrupts + */ + p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); + if (p != NULL) { + writel(0, p + 0x4c); + + /* + * Read the register back to ensure that it took effect. + */ + readl(p + 0x4c); + iounmap(p); + } +} + +#define NI8420_INT_ENABLE_REG 0x38 +#define NI8420_INT_ENABLE_BIT 0x2000 + +static void __devexit pci_ni8420_exit(struct pci_dev *dev) +{ + void __iomem *p; + unsigned long base, len; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return; + } + + base = pci_resource_start(dev, bar); + len = pci_resource_len(dev, bar); + p = ioremap_nocache(base, len); + if (p == NULL) + return; + + /* Disable the CPU Interrupt */ + writel(readl(p + NI8420_INT_ENABLE_REG) & ~(NI8420_INT_ENABLE_BIT), + p + NI8420_INT_ENABLE_REG); + iounmap(p); +} + + +/* MITE registers */ +#define MITE_IOWBSR1 0xc4 +#define MITE_IOWCR1 0xf4 +#define MITE_LCIMR1 0x08 +#define MITE_LCIMR2 0x10 + +#define MITE_LCIMR2_CLR_CPU_IE (1 << 30) + +static void __devexit pci_ni8430_exit(struct pci_dev *dev) +{ + void __iomem *p; + unsigned long base, len; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return; + } + + base = pci_resource_start(dev, bar); + len = pci_resource_len(dev, bar); + p = ioremap_nocache(base, len); + if (p == NULL) + return; + + /* Disable the CPU Interrupt */ + writel(MITE_LCIMR2_CLR_CPU_IE, p + MITE_LCIMR2); + iounmap(p); +} + +/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ +static int +sbs_setup(struct serial_private *priv, const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + bar = 0; + + if (idx < 4) { + /* first four channels map to 0, 0x100, 0x200, 0x300 */ + offset += idx * board->uart_offset; + } else if (idx < 8) { + /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */ + offset += idx * board->uart_offset + 0xC00; + } else /* we have only 8 ports on PMC-OCTALPRO */ + return 1; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* +* This does initialization for PMC OCTALPRO cards: +* maps the device memory, resets the UARTs (needed, bc +* if the module is removed and inserted again, the card +* is in the sleep mode) and enables global interrupt. +*/ + +/* global control register offset for SBS PMC-OctalPro */ +#define OCT_REG_CR_OFF 0x500 + +static int sbs_init(struct pci_dev *dev) +{ + u8 __iomem *p; + + p = pci_ioremap_bar(dev, 0); + + if (p == NULL) + return -ENOMEM; + /* Set bit-4 Control Register (UART RESET) in to reset the uarts */ + writeb(0x10, p + OCT_REG_CR_OFF); + udelay(50); + writeb(0x0, p + OCT_REG_CR_OFF); + + /* Set bit-2 (INTENABLE) of Control Register */ + writeb(0x4, p + OCT_REG_CR_OFF); + iounmap(p); + + return 0; +} + +/* + * Disables the global interrupt of PMC-OctalPro + */ + +static void __devexit sbs_exit(struct pci_dev *dev) +{ + u8 __iomem *p; + + p = pci_ioremap_bar(dev, 0); + /* FIXME: What if resource_len < OCT_REG_CR_OFF */ + if (p != NULL) + writeb(0, p + OCT_REG_CR_OFF); + iounmap(p); +} + +/* + * SIIG serial cards have an PCI interface chip which also controls + * the UART clocking frequency. Each UART can be clocked independently + * (except cards equiped with 4 UARTs) and initial clocking settings + * are stored in the EEPROM chip. It can cause problems because this + * version of serial driver doesn't support differently clocked UART's + * on single PCI card. To prevent this, initialization functions set + * high frequency clocking for all UART's on given card. It is safe (I + * hope) because it doesn't touch EEPROM settings to prevent conflicts + * with other OSes (like M$ DOS). + * + * SIIG support added by Andrey Panin , 10/1999 + * + * There is two family of SIIG serial cards with different PCI + * interface chip and different configuration methods: + * - 10x cards have control registers in IO and/or memory space; + * - 20x cards have control registers in standard PCI configuration space. + * + * Note: all 10x cards have PCI device ids 0x10.. + * all 20x cards have PCI device ids 0x20.. + * + * There are also Quartet Serial cards which use Oxford Semiconductor + * 16954 quad UART PCI chip clocked by 18.432 MHz quartz. + * + * Note: some SIIG cards are probed by the parport_serial object. + */ + +#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc) +#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8) + +static int pci_siig10x_init(struct pci_dev *dev) +{ + u16 data; + void __iomem *p; + + switch (dev->device & 0xfff8) { + case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */ + data = 0xffdf; + break; + case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */ + data = 0xf7ff; + break; + default: /* 1S1P, 4S */ + data = 0xfffb; + break; + } + + p = ioremap_nocache(pci_resource_start(dev, 0), 0x80); + if (p == NULL) + return -ENOMEM; + + writew(readw(p + 0x28) & data, p + 0x28); + readw(p + 0x28); + iounmap(p); + return 0; +} + +#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc) +#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc) + +static int pci_siig20x_init(struct pci_dev *dev) +{ + u8 data; + + /* Change clock frequency for the first UART. */ + pci_read_config_byte(dev, 0x6f, &data); + pci_write_config_byte(dev, 0x6f, data & 0xef); + + /* If this card has 2 UART, we have to do the same with second UART. */ + if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) || + ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) { + pci_read_config_byte(dev, 0x73, &data); + pci_write_config_byte(dev, 0x73, data & 0xef); + } + return 0; +} + +static int pci_siig_init(struct pci_dev *dev) +{ + unsigned int type = dev->device & 0xff00; + + if (type == 0x1000) + return pci_siig10x_init(dev); + else if (type == 0x2000) + return pci_siig20x_init(dev); + + moan_device("Unknown SIIG card", dev); + return -ENODEV; +} + +static int pci_siig_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0; + + if (idx > 3) { + bar = 4; + offset = (idx - 4) * 8; + } + + return setup_port(priv, port, bar, offset, 0); +} + +/* + * Timedia has an explosion of boards, and to avoid the PCI table from + * growing *huge*, we use this function to collapse some 70 entries + * in the PCI table into one, for sanity's and compactness's sake. + */ +static const unsigned short timedia_single_port[] = { + 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 +}; + +static const unsigned short timedia_dual_port[] = { + 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, + 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, + 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, + 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, + 0xD079, 0 +}; + +static const unsigned short timedia_quad_port[] = { + 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, + 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, + 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, + 0xB157, 0 +}; + +static const unsigned short timedia_eight_port[] = { + 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, + 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 +}; + +static const struct timedia_struct { + int num; + const unsigned short *ids; +} timedia_data[] = { + { 1, timedia_single_port }, + { 2, timedia_dual_port }, + { 4, timedia_quad_port }, + { 8, timedia_eight_port } +}; + +static int pci_timedia_init(struct pci_dev *dev) +{ + const unsigned short *ids; + int i, j; + + for (i = 0; i < ARRAY_SIZE(timedia_data); i++) { + ids = timedia_data[i].ids; + for (j = 0; ids[j]; j++) + if (dev->subsystem_device == ids[j]) + return timedia_data[i].num; + } + return 0; +} + +/* + * Timedia/SUNIX uses a mixture of BARs and offsets + * Ugh, this is ugly as all hell --- TYT + */ +static int +pci_timedia_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar = 0, offset = board->first_offset; + + switch (idx) { + case 0: + bar = 0; + break; + case 1: + offset = board->uart_offset; + bar = 0; + break; + case 2: + bar = 1; + break; + case 3: + offset = board->uart_offset; + /* FALLTHROUGH */ + case 4: /* BAR 2 */ + case 5: /* BAR 3 */ + case 6: /* BAR 4 */ + case 7: /* BAR 5 */ + bar = idx - 2; + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +/* + * Some Titan cards are also a little weird + */ +static int +titan_400l_800l_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + switch (idx) { + case 0: + bar = 1; + break; + case 1: + bar = 2; + break; + default: + bar = 4; + offset = (idx - 2) * board->uart_offset; + } + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +static int pci_xircom_init(struct pci_dev *dev) +{ + msleep(100); + return 0; +} + +static int pci_ni8420_init(struct pci_dev *dev) +{ + void __iomem *p; + unsigned long base, len; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return 0; + } + + base = pci_resource_start(dev, bar); + len = pci_resource_len(dev, bar); + p = ioremap_nocache(base, len); + if (p == NULL) + return -ENOMEM; + + /* Enable CPU Interrupt */ + writel(readl(p + NI8420_INT_ENABLE_REG) | NI8420_INT_ENABLE_BIT, + p + NI8420_INT_ENABLE_REG); + + iounmap(p); + return 0; +} + +#define MITE_IOWBSR1_WSIZE 0xa +#define MITE_IOWBSR1_WIN_OFFSET 0x800 +#define MITE_IOWBSR1_WENAB (1 << 7) +#define MITE_LCIMR1_IO_IE_0 (1 << 24) +#define MITE_LCIMR2_SET_CPU_IE (1 << 31) +#define MITE_IOWCR1_RAMSEL_MASK 0xfffffffe + +static int pci_ni8430_init(struct pci_dev *dev) +{ + void __iomem *p; + unsigned long base, len; + u32 device_window; + unsigned int bar = 0; + + if ((pci_resource_flags(dev, bar) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar", dev); + return 0; + } + + base = pci_resource_start(dev, bar); + len = pci_resource_len(dev, bar); + p = ioremap_nocache(base, len); + if (p == NULL) + return -ENOMEM; + + /* Set device window address and size in BAR0 */ + device_window = ((base + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00) + | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE; + writel(device_window, p + MITE_IOWBSR1); + + /* Set window access to go to RAMSEL IO address space */ + writel((readl(p + MITE_IOWCR1) & MITE_IOWCR1_RAMSEL_MASK), + p + MITE_IOWCR1); + + /* Enable IO Bus Interrupt 0 */ + writel(MITE_LCIMR1_IO_IE_0, p + MITE_LCIMR1); + + /* Enable CPU Interrupt */ + writel(MITE_LCIMR2_SET_CPU_IE, p + MITE_LCIMR2); + + iounmap(p); + return 0; +} + +/* UART Port Control Register */ +#define NI8430_PORTCON 0x0f +#define NI8430_PORTCON_TXVR_ENABLE (1 << 3) + +static int +pci_ni8430_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + void __iomem *p; + unsigned long base, len; + unsigned int bar, offset = board->first_offset; + + if (idx >= board->num_ports) + return 1; + + bar = FL_GET_BASE(board->flags); + offset += idx * board->uart_offset; + + base = pci_resource_start(priv->dev, bar); + len = pci_resource_len(priv->dev, bar); + p = ioremap_nocache(base, len); + + /* enable the transciever */ + writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE, + p + offset + NI8430_PORTCON); + + iounmap(p); + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + + +static int pci_netmos_init(struct pci_dev *dev) +{ + /* subdevice 0x00PS means

parallel, serial */ + unsigned int num_serial = dev->subsystem_device & 0xf; + + if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) || + (dev->device == PCI_DEVICE_ID_NETMOS_9865)) + return 0; + if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && + dev->subsystem_device == 0x0299) + return 0; + + if (num_serial == 0) + return -ENODEV; + return num_serial; +} + +/* + * These chips are available with optionally one parallel port and up to + * two serial ports. Unfortunately they all have the same product id. + * + * Basic configuration is done over a region of 32 I/O ports. The base + * ioport is called INTA or INTC, depending on docs/other drivers. + * + * The region of the 32 I/O ports is configured in POSIO0R... + */ + +/* registers */ +#define ITE_887x_MISCR 0x9c +#define ITE_887x_INTCBAR 0x78 +#define ITE_887x_UARTBAR 0x7c +#define ITE_887x_PS0BAR 0x10 +#define ITE_887x_POSIO0 0x60 + +/* I/O space size */ +#define ITE_887x_IOSIZE 32 +/* I/O space size (bits 26-24; 8 bytes = 011b) */ +#define ITE_887x_POSIO_IOSIZE_8 (3 << 24) +/* I/O space size (bits 26-24; 32 bytes = 101b) */ +#define ITE_887x_POSIO_IOSIZE_32 (5 << 24) +/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */ +#define ITE_887x_POSIO_SPEED (3 << 29) +/* enable IO_Space bit */ +#define ITE_887x_POSIO_ENABLE (1 << 31) + +static int pci_ite887x_init(struct pci_dev *dev) +{ + /* inta_addr are the configuration addresses of the ITE */ + static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0, + 0x200, 0x280, 0 }; + int ret, i, type; + struct resource *iobase = NULL; + u32 miscr, uartbar, ioport; + + /* search for the base-ioport */ + i = 0; + while (inta_addr[i] && iobase == NULL) { + iobase = request_region(inta_addr[i], ITE_887x_IOSIZE, + "ite887x"); + if (iobase != NULL) { + /* write POSIO0R - speed | size | ioport */ + pci_write_config_dword(dev, ITE_887x_POSIO0, + ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | + ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]); + /* write INTCBAR - ioport */ + pci_write_config_dword(dev, ITE_887x_INTCBAR, + inta_addr[i]); + ret = inb(inta_addr[i]); + if (ret != 0xff) { + /* ioport connected */ + break; + } + release_region(iobase->start, ITE_887x_IOSIZE); + iobase = NULL; + } + i++; + } + + if (!inta_addr[i]) { + printk(KERN_ERR "ite887x: could not find iobase\n"); + return -ENODEV; + } + + /* start of undocumented type checking (see parport_pc.c) */ + type = inb(iobase->start + 0x18) & 0x0f; + + switch (type) { + case 0x2: /* ITE8871 (1P) */ + case 0xa: /* ITE8875 (1P) */ + ret = 0; + break; + case 0xe: /* ITE8872 (2S1P) */ + ret = 2; + break; + case 0x6: /* ITE8873 (1S) */ + ret = 1; + break; + case 0x8: /* ITE8874 (2S) */ + ret = 2; + break; + default: + moan_device("Unknown ITE887x", dev); + ret = -ENODEV; + } + + /* configure all serial ports */ + for (i = 0; i < ret; i++) { + /* read the I/O port from the device */ + pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)), + &ioport); + ioport &= 0x0000FF00; /* the actual base address */ + pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)), + ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | + ITE_887x_POSIO_IOSIZE_8 | ioport); + + /* write the ioport to the UARTBAR */ + pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar); + uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */ + uartbar |= (ioport << (16 * i)); /* set the ioport */ + pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar); + + /* get current config */ + pci_read_config_dword(dev, ITE_887x_MISCR, &miscr); + /* disable interrupts (UARTx_Routing[3:0]) */ + miscr &= ~(0xf << (12 - 4 * i)); + /* activate the UART (UARTx_En) */ + miscr |= 1 << (23 - i); + /* write new config with activated UART */ + pci_write_config_dword(dev, ITE_887x_MISCR, miscr); + } + + if (ret <= 0) { + /* the device has no UARTs if we get here */ + release_region(iobase->start, ITE_887x_IOSIZE); + } + + return ret; +} + +static void __devexit pci_ite887x_exit(struct pci_dev *dev) +{ + u32 ioport; + /* the ioport is bit 0-15 in POSIO0R */ + pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport); + ioport &= 0xffff; + release_region(ioport, ITE_887x_IOSIZE); +} + +/* + * Oxford Semiconductor Inc. + * Check that device is part of the Tornado range of devices, then determine + * the number of ports available on the device. + */ +static int pci_oxsemi_tornado_init(struct pci_dev *dev) +{ + u8 __iomem *p; + unsigned long deviceID; + unsigned int number_uarts = 0; + + /* OxSemi Tornado devices are all 0xCxxx */ + if (dev->vendor == PCI_VENDOR_ID_OXSEMI && + (dev->device & 0xF000) != 0xC000) + return 0; + + p = pci_iomap(dev, 0, 5); + if (p == NULL) + return -ENOMEM; + + deviceID = ioread32(p); + /* Tornado device */ + if (deviceID == 0x07000200) { + number_uarts = ioread8(p + 4); + printk(KERN_DEBUG + "%d ports detected on Oxford PCI Express device\n", + number_uarts); + } + pci_iounmap(dev, p); + return number_uarts; +} + +static int +pci_default_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset, maxnr; + + bar = FL_GET_BASE(board->flags); + if (board->flags & FL_BASE_BARS) + bar += idx; + else + offset += idx * board->uart_offset; + + maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >> + (board->reg_shift + 3); + + if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) + return 1; + + return setup_port(priv, port, bar, offset, board->reg_shift); +} + +static int +ce4100_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + int ret; + + ret = setup_port(priv, port, 0, 0, board->reg_shift); + port->iotype = UPIO_MEM32; + port->type = PORT_XSCALE; + port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); + port->regshift = 2; + + return ret; +} + +static int skip_tx_en_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + port->flags |= UPF_NO_TXEN_TEST; + printk(KERN_DEBUG "serial8250: skipping TxEn test for device " + "[%04x:%04x] subsystem [%04x:%04x]\n", + priv->dev->vendor, + priv->dev->device, + priv->dev->subsystem_vendor, + priv->dev->subsystem_device); + + return pci_default_setup(priv, board, port, idx); +} + +/* This should be in linux/pci_ids.h */ +#define PCI_VENDOR_ID_SBSMODULARIO 0x124B +#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B +#define PCI_DEVICE_ID_OCTPRO 0x0001 +#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108 +#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 +#define PCI_SUBDEVICE_ID_POCTAL232 0x0308 +#define PCI_SUBDEVICE_ID_POCTAL422 0x0408 +#define PCI_VENDOR_ID_ADVANTECH 0x13fe +#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66 +#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 +#define PCI_DEVICE_ID_TITAN_200I 0x8028 +#define PCI_DEVICE_ID_TITAN_400I 0x8048 +#define PCI_DEVICE_ID_TITAN_800I 0x8088 +#define PCI_DEVICE_ID_TITAN_800EH 0xA007 +#define PCI_DEVICE_ID_TITAN_800EHB 0xA008 +#define PCI_DEVICE_ID_TITAN_400EH 0xA009 +#define PCI_DEVICE_ID_TITAN_100E 0xA010 +#define PCI_DEVICE_ID_TITAN_200E 0xA012 +#define PCI_DEVICE_ID_TITAN_400E 0xA013 +#define PCI_DEVICE_ID_TITAN_800E 0xA014 +#define PCI_DEVICE_ID_TITAN_200EI 0xA016 +#define PCI_DEVICE_ID_TITAN_200EISI 0xA017 +#define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 + +/* Unknown vendors/cards - this should not be in linux/pci_ids.h */ +#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 + +/* + * Master list of serial port init/setup/exit quirks. + * This does not describe the general nature of the port. + * (ie, baud base, number and location of ports, etc) + * + * This list is ordered alphabetically by vendor then device. + * Specific entries must come before more generic entries. + */ +static struct pci_serial_quirk pci_serial_quirks[] __refdata = { + /* + * ADDI-DATA GmbH communication cards + */ + { + .vendor = PCI_VENDOR_ID_ADDIDATA_OLD, + .device = PCI_DEVICE_ID_ADDIDATA_APCI7800, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = addidata_apci7800_setup, + }, + /* + * AFAVLAB cards - these may be called via parport_serial + * It is not clear whether this applies to all products. + */ + { + .vendor = PCI_VENDOR_ID_AFAVLAB, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = afavlab_setup, + }, + /* + * HP Diva + */ + { + .vendor = PCI_VENDOR_ID_HP, + .device = PCI_DEVICE_ID_HP_DIVA, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_hp_diva_init, + .setup = pci_hp_diva_setup, + }, + /* + * Intel + */ + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_80960_RP, + .subvendor = 0xe4bf, + .subdevice = PCI_ANY_ID, + .init = pci_inteli960ni_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_8257X_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573L_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573E_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_CE4100_UART, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = ce4100_serial_setup, + }, + /* + * ITE + */ + { + .vendor = PCI_VENDOR_ID_ITE, + .device = PCI_DEVICE_ID_ITE_8872, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ite887x_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ite887x_exit), + }, + /* + * National Instruments + */ + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI23216, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2328, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2324, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2322, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2324I, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PCI2322I, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_23216, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_2328, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_2324, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8420_2322, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8422_2324, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_DEVICE_ID_NI_PXI8422_2322, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8420_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_ni8420_exit), + }, + { + .vendor = PCI_VENDOR_ID_NI, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_ni8430_init, + .setup = pci_ni8430_setup, + .exit = __devexit_p(pci_ni8430_exit), + }, + /* + * Panacom + */ + { + .vendor = PCI_VENDOR_ID_PANACOM, + .device = PCI_DEVICE_ID_PANACOM_QUADMODEM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PANACOM, + .device = PCI_DEVICE_ID_PANACOM_DUALMODEM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + /* + * PLX + */ + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9030, + .subvendor = PCI_SUBVENDOR_ID_PERLE, + .subdevice = PCI_ANY_ID, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_SUBVENDOR_ID_EXSYS, + .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_SUBVENDOR_ID_KEYSPAN, + .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_VENDOR_ID_PLX, + .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_ROMULUS, + .subvendor = PCI_VENDOR_ID_PLX, + .subdevice = PCI_DEVICE_ID_PLX_ROMULUS, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + /* + * SBS Technologies, Inc., PMC-OCTALPRO 232 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_OCTPRO232, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SBS Technologies, Inc., PMC-OCTALPRO 422 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_OCTPRO422, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SBS Technologies, Inc., P-Octal 232 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_POCTAL232, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SBS Technologies, Inc., P-Octal 422 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_POCTAL422, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SIIG cards - these may be called via parport_serial + */ + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig_init, + .setup = pci_siig_setup, + }, + /* + * Titan cards + */ + { + .vendor = PCI_VENDOR_ID_TITAN, + .device = PCI_DEVICE_ID_TITAN_400L, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = titan_400l_800l_setup, + }, + { + .vendor = PCI_VENDOR_ID_TITAN, + .device = PCI_DEVICE_ID_TITAN_800L, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = titan_400l_800l_setup, + }, + /* + * Timedia cards + */ + { + .vendor = PCI_VENDOR_ID_TIMEDIA, + .device = PCI_DEVICE_ID_TIMEDIA_1889, + .subvendor = PCI_VENDOR_ID_TIMEDIA, + .subdevice = PCI_ANY_ID, + .init = pci_timedia_init, + .setup = pci_timedia_setup, + }, + { + .vendor = PCI_VENDOR_ID_TIMEDIA, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_timedia_setup, + }, + /* + * Xircom cards + */ + { + .vendor = PCI_VENDOR_ID_XIRCOM, + .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_xircom_init, + .setup = pci_default_setup, + }, + /* + * Netmos cards - these may be called via parport_serial + */ + { + .vendor = PCI_VENDOR_ID_NETMOS, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_netmos_init, + .setup = pci_default_setup, + }, + /* + * For Oxford Semiconductor and Mainpine + */ + { + .vendor = PCI_VENDOR_ID_OXSEMI, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_MAINPINE, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_oxsemi_tornado_init, + .setup = pci_default_setup, + }, + /* + * Default "match everything" terminator entry + */ + { + .vendor = PCI_ANY_ID, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_default_setup, + } +}; + +static inline int quirk_id_matches(u32 quirk_id, u32 dev_id) +{ + return quirk_id == PCI_ANY_ID || quirk_id == dev_id; +} + +static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) +{ + struct pci_serial_quirk *quirk; + + for (quirk = pci_serial_quirks; ; quirk++) + if (quirk_id_matches(quirk->vendor, dev->vendor) && + quirk_id_matches(quirk->device, dev->device) && + quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && + quirk_id_matches(quirk->subdevice, dev->subsystem_device)) + break; + return quirk; +} + +static inline int get_pci_irq(struct pci_dev *dev, + const struct pciserial_board *board) +{ + if (board->flags & FL_NOIRQ) + return 0; + else + return dev->irq; +} + +/* + * This is the configuration table for all of the PCI serial boards + * which we support. It is directly indexed by the pci_board_num_t enum + * value, which is encoded in the pci_device_id PCI probe table's + * driver_data member. + * + * The makeup of these names are: + * pbn_bn{_bt}_n_baud{_offsetinhex} + * + * bn = PCI BAR number + * bt = Index using PCI BARs + * n = number of serial ports + * baud = baud rate + * offsetinhex = offset for each sequential port (in hex) + * + * This table is sorted by (in order): bn, bt, baud, offsetindex, n. + * + * Please note: in theory if n = 1, _bt infix should make no difference. + * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200 + */ +enum pci_board_num_t { + pbn_default = 0, + + pbn_b0_1_115200, + pbn_b0_2_115200, + pbn_b0_4_115200, + pbn_b0_5_115200, + pbn_b0_8_115200, + + pbn_b0_1_921600, + pbn_b0_2_921600, + pbn_b0_4_921600, + + pbn_b0_2_1130000, + + pbn_b0_4_1152000, + + pbn_b0_2_1843200, + pbn_b0_4_1843200, + + pbn_b0_2_1843200_200, + pbn_b0_4_1843200_200, + pbn_b0_8_1843200_200, + + pbn_b0_1_4000000, + + pbn_b0_bt_1_115200, + pbn_b0_bt_2_115200, + pbn_b0_bt_4_115200, + pbn_b0_bt_8_115200, + + pbn_b0_bt_1_460800, + pbn_b0_bt_2_460800, + pbn_b0_bt_4_460800, + + pbn_b0_bt_1_921600, + pbn_b0_bt_2_921600, + pbn_b0_bt_4_921600, + pbn_b0_bt_8_921600, + + pbn_b1_1_115200, + pbn_b1_2_115200, + pbn_b1_4_115200, + pbn_b1_8_115200, + pbn_b1_16_115200, + + pbn_b1_1_921600, + pbn_b1_2_921600, + pbn_b1_4_921600, + pbn_b1_8_921600, + + pbn_b1_2_1250000, + + pbn_b1_bt_1_115200, + pbn_b1_bt_2_115200, + pbn_b1_bt_4_115200, + + pbn_b1_bt_2_921600, + + pbn_b1_1_1382400, + pbn_b1_2_1382400, + pbn_b1_4_1382400, + pbn_b1_8_1382400, + + pbn_b2_1_115200, + pbn_b2_2_115200, + pbn_b2_4_115200, + pbn_b2_8_115200, + + pbn_b2_1_460800, + pbn_b2_4_460800, + pbn_b2_8_460800, + pbn_b2_16_460800, + + pbn_b2_1_921600, + pbn_b2_4_921600, + pbn_b2_8_921600, + + pbn_b2_8_1152000, + + pbn_b2_bt_1_115200, + pbn_b2_bt_2_115200, + pbn_b2_bt_4_115200, + + pbn_b2_bt_2_921600, + pbn_b2_bt_4_921600, + + pbn_b3_2_115200, + pbn_b3_4_115200, + pbn_b3_8_115200, + + pbn_b4_bt_2_921600, + pbn_b4_bt_4_921600, + pbn_b4_bt_8_921600, + + /* + * Board-specific versions. + */ + pbn_panacom, + pbn_panacom2, + pbn_panacom4, + pbn_exsys_4055, + pbn_plx_romulus, + pbn_oxsemi, + pbn_oxsemi_1_4000000, + pbn_oxsemi_2_4000000, + pbn_oxsemi_4_4000000, + pbn_oxsemi_8_4000000, + pbn_intel_i960, + pbn_sgi_ioc3, + pbn_computone_4, + pbn_computone_6, + pbn_computone_8, + pbn_sbsxrsio, + pbn_exar_XR17C152, + pbn_exar_XR17C154, + pbn_exar_XR17C158, + pbn_exar_ibm_saturn, + pbn_pasemi_1682M, + pbn_ni8430_2, + pbn_ni8430_4, + pbn_ni8430_8, + pbn_ni8430_16, + pbn_ADDIDATA_PCIe_1_3906250, + pbn_ADDIDATA_PCIe_2_3906250, + pbn_ADDIDATA_PCIe_4_3906250, + pbn_ADDIDATA_PCIe_8_3906250, + pbn_ce4100_1_115200, +}; + +/* + * uart_offset - the space between channels + * reg_shift - describes how the UART registers are mapped + * to PCI memory by the card. + * For example IER register on SBS, Inc. PMC-OctPro is located at + * offset 0x10 from the UART base, while UART_IER is defined as 1 + * in include/linux/serial_reg.h, + * see first lines of serial_in() and serial_out() in 8250.c +*/ + +static struct pciserial_board pci_boards[] __devinitdata = { + [pbn_default] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_1_115200] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_2_115200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_4_115200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_5_115200] = { + .flags = FL_BASE0, + .num_ports = 5, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_8_115200] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_1_921600] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_2_921600] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_4_921600] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b0_2_1130000] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1130000, + .uart_offset = 8, + }, + + [pbn_b0_4_1152000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1152000, + .uart_offset = 8, + }, + + [pbn_b0_2_1843200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1843200, + .uart_offset = 8, + }, + [pbn_b0_4_1843200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1843200, + .uart_offset = 8, + }, + + [pbn_b0_2_1843200_200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 1843200, + .uart_offset = 0x200, + }, + [pbn_b0_4_1843200_200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1843200, + .uart_offset = 0x200, + }, + [pbn_b0_8_1843200_200] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 1843200, + .uart_offset = 0x200, + }, + [pbn_b0_1_4000000] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 4000000, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_2_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_4_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_8_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b0_bt_2_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b0_bt_4_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 460800, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_2_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_4_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_8_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b1_1_115200] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_2_115200] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_4_115200] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_8_115200] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_16_115200] = { + .flags = FL_BASE1, + .num_ports = 16, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b1_1_921600] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_2_921600] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_4_921600] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_8_921600] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_2_1250000] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 1250000, + .uart_offset = 8, + }, + + [pbn_b1_bt_1_115200] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_bt_2_115200] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_bt_4_115200] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b1_bt_2_921600] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b1_1_1382400] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_2_1382400] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_4_1382400] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_8_1382400] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 1382400, + .uart_offset = 8, + }, + + [pbn_b2_1_115200] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_2_115200] = { + .flags = FL_BASE2, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_4_115200] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_8_115200] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b2_1_460800] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_4_460800] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_8_460800] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_16_460800] = { + .flags = FL_BASE2, + .num_ports = 16, + .base_baud = 460800, + .uart_offset = 8, + }, + + [pbn_b2_1_921600] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_4_921600] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_8_921600] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b2_8_1152000] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 1152000, + .uart_offset = 8, + }, + + [pbn_b2_bt_1_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_bt_2_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_bt_4_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b2_bt_2_921600] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_bt_4_921600] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b3_2_115200] = { + .flags = FL_BASE3, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b3_4_115200] = { + .flags = FL_BASE3, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b3_8_115200] = { + .flags = FL_BASE3, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b4_bt_2_921600] = { + .flags = FL_BASE4, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b4_bt_4_921600] = { + .flags = FL_BASE4, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b4_bt_8_921600] = { + .flags = FL_BASE4, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + /* + * Entries following this are board-specific. + */ + + /* + * Panacom - IOMEM + */ + [pbn_panacom] = { + .flags = FL_BASE2, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + [pbn_panacom2] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + [pbn_panacom4] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + + [pbn_exsys_4055] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + + /* I think this entry is broken - the first_offset looks wrong --rmk */ + [pbn_plx_romulus] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8 << 2, + .reg_shift = 2, + .first_offset = 0x03, + }, + + /* + * This board uses the size of PCI Base region 0 to + * signal now many ports are available + */ + [pbn_oxsemi] = { + .flags = FL_BASE0|FL_REGION_SZ_CAP, + .num_ports = 32, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_oxsemi_1_4000000] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_2_4000000] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_4_4000000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_8_4000000] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + + + /* + * EKF addition for i960 Boards form EKF with serial port. + * Max 256 ports. + */ + [pbn_intel_i960] = { + .flags = FL_BASE0, + .num_ports = 32, + .base_baud = 921600, + .uart_offset = 8 << 2, + .reg_shift = 2, + .first_offset = 0x10000, + }, + [pbn_sgi_ioc3] = { + .flags = FL_BASE0|FL_NOIRQ, + .num_ports = 1, + .base_baud = 458333, + .uart_offset = 8, + .reg_shift = 0, + .first_offset = 0x20178, + }, + + /* + * Computone - uses IOMEM. + */ + [pbn_computone_4] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_computone_6] = { + .flags = FL_BASE0, + .num_ports = 6, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_computone_8] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_sbsxrsio] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 460800, + .uart_offset = 256, + .reg_shift = 4, + }, + /* + * Exar Corp. XR17C15[248] Dual/Quad/Octal UART + * Only basic 16550A support. + * XR17C15[24] are not tested, but they should work. + */ + [pbn_exar_XR17C152] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_exar_XR17C154] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_exar_XR17C158] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_exar_ibm_saturn] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 0x200, + }, + + /* + * PA Semi PWRficient PA6T-1682M on-chip UART + */ + [pbn_pasemi_1682M] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 8333333, + }, + /* + * National Instruments 843x + */ + [pbn_ni8430_16] = { + .flags = FL_BASE0, + .num_ports = 16, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + [pbn_ni8430_8] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + [pbn_ni8430_4] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + [pbn_ni8430_2] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 3686400, + .uart_offset = 0x10, + .first_offset = 0x800, + }, + /* + * ADDI-DATA GmbH PCI-Express communication cards + */ + [pbn_ADDIDATA_PCIe_1_3906250] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_2_3906250] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_4_3906250] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_8_3906250] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ce4100_1_115200] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .reg_shift = 2, + }, +}; + +static const struct pci_device_id softmodem_blacklist[] = { + { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */ + { PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */ + { PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */ +}; + +/* + * Given a complete unknown PCI device, try to use some heuristics to + * guess what the configuration might be, based on the pitiful PCI + * serial specs. Returns 0 on success, 1 on failure. + */ +static int __devinit +serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) +{ + const struct pci_device_id *blacklist; + int num_iomem, num_port, first_port = -1, i; + + /* + * If it is not a communications device or the programming + * interface is greater than 6, give up. + * + * (Should we try to make guesses for multiport serial devices + * later?) + */ + if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && + ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || + (dev->class & 0xff) > 6) + return -ENODEV; + + /* + * Do not access blacklisted devices that are known not to + * feature serial ports. + */ + for (blacklist = softmodem_blacklist; + blacklist < softmodem_blacklist + ARRAY_SIZE(softmodem_blacklist); + blacklist++) { + if (dev->vendor == blacklist->vendor && + dev->device == blacklist->device) + return -ENODEV; + } + + num_iomem = num_port = 0; + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO) { + num_port++; + if (first_port == -1) + first_port = i; + } + if (pci_resource_flags(dev, i) & IORESOURCE_MEM) + num_iomem++; + } + + /* + * If there is 1 or 0 iomem regions, and exactly one port, + * use it. We guess the number of ports based on the IO + * region size. + */ + if (num_iomem <= 1 && num_port == 1) { + board->flags = first_port; + board->num_ports = pci_resource_len(dev, first_port) / 8; + return 0; + } + + /* + * Now guess if we've got a board which indexes by BARs. + * Each IO BAR should be 8 bytes, and they should follow + * consecutively. + */ + first_port = -1; + num_port = 0; + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO && + pci_resource_len(dev, i) == 8 && + (first_port == -1 || (first_port + num_port) == i)) { + num_port++; + if (first_port == -1) + first_port = i; + } + } + + if (num_port > 1) { + board->flags = first_port | FL_BASE_BARS; + board->num_ports = num_port; + return 0; + } + + return -ENODEV; +} + +static inline int +serial_pci_matches(const struct pciserial_board *board, + const struct pciserial_board *guessed) +{ + return + board->num_ports == guessed->num_ports && + board->base_baud == guessed->base_baud && + board->uart_offset == guessed->uart_offset && + board->reg_shift == guessed->reg_shift && + board->first_offset == guessed->first_offset; +} + +struct serial_private * +pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) +{ + struct uart_port serial_port; + struct serial_private *priv; + struct pci_serial_quirk *quirk; + int rc, nr_ports, i; + + nr_ports = board->num_ports; + + /* + * Find an init and setup quirks. + */ + quirk = find_quirk(dev); + + /* + * Run the new-style initialization function. + * The initialization function returns: + * <0 - error + * 0 - use board->num_ports + * >0 - number of ports + */ + if (quirk->init) { + rc = quirk->init(dev); + if (rc < 0) { + priv = ERR_PTR(rc); + goto err_out; + } + if (rc) + nr_ports = rc; + } + + priv = kzalloc(sizeof(struct serial_private) + + sizeof(unsigned int) * nr_ports, + GFP_KERNEL); + if (!priv) { + priv = ERR_PTR(-ENOMEM); + goto err_deinit; + } + + priv->dev = dev; + priv->quirk = quirk; + + memset(&serial_port, 0, sizeof(struct uart_port)); + serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + serial_port.uartclk = board->base_baud * 16; + serial_port.irq = get_pci_irq(dev, board); + serial_port.dev = &dev->dev; + + for (i = 0; i < nr_ports; i++) { + if (quirk->setup(priv, board, &serial_port, i)) + break; + +#ifdef SERIAL_DEBUG_PCI + printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n", + serial_port.iobase, serial_port.irq, serial_port.iotype); +#endif + + priv->line[i] = serial8250_register_port(&serial_port); + if (priv->line[i] < 0) { + printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]); + break; + } + } + priv->nr = i; + return priv; + +err_deinit: + if (quirk->exit) + quirk->exit(dev); +err_out: + return priv; +} +EXPORT_SYMBOL_GPL(pciserial_init_ports); + +void pciserial_remove_ports(struct serial_private *priv) +{ + struct pci_serial_quirk *quirk; + int i; + + for (i = 0; i < priv->nr; i++) + serial8250_unregister_port(priv->line[i]); + + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (priv->remapped_bar[i]) + iounmap(priv->remapped_bar[i]); + priv->remapped_bar[i] = NULL; + } + + /* + * Find the exit quirks. + */ + quirk = find_quirk(priv->dev); + if (quirk->exit) + quirk->exit(priv->dev); + + kfree(priv); +} +EXPORT_SYMBOL_GPL(pciserial_remove_ports); + +void pciserial_suspend_ports(struct serial_private *priv) +{ + int i; + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_suspend_port(priv->line[i]); +} +EXPORT_SYMBOL_GPL(pciserial_suspend_ports); + +void pciserial_resume_ports(struct serial_private *priv) +{ + int i; + + /* + * Ensure that the board is correctly configured. + */ + if (priv->quirk->init) + priv->quirk->init(priv->dev); + + for (i = 0; i < priv->nr; i++) + if (priv->line[i] >= 0) + serial8250_resume_port(priv->line[i]); +} +EXPORT_SYMBOL_GPL(pciserial_resume_ports); + +/* + * Probe one serial board. Unfortunately, there is no rhyme nor reason + * to the arrangement of serial ports on a PCI card. + */ +static int __devinit +pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct serial_private *priv; + const struct pciserial_board *board; + struct pciserial_board tmp; + int rc; + + if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { + printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n", + ent->driver_data); + return -EINVAL; + } + + board = &pci_boards[ent->driver_data]; + + rc = pci_enable_device(dev); + if (rc) + return rc; + + if (ent->driver_data == pbn_default) { + /* + * Use a copy of the pci_board entry for this; + * avoid changing entries in the table. + */ + memcpy(&tmp, board, sizeof(struct pciserial_board)); + board = &tmp; + + /* + * We matched one of our class entries. Try to + * determine the parameters of this board. + */ + rc = serial_pci_guess_board(dev, &tmp); + if (rc) + goto disable; + } else { + /* + * We matched an explicit entry. If we are able to + * detect this boards settings with our heuristic, + * then we no longer need this entry. + */ + memcpy(&tmp, &pci_boards[pbn_default], + sizeof(struct pciserial_board)); + rc = serial_pci_guess_board(dev, &tmp); + if (rc == 0 && serial_pci_matches(board, &tmp)) + moan_device("Redundant entry in serial pci_table.", + dev); + } + + priv = pciserial_init_ports(dev, board); + if (!IS_ERR(priv)) { + pci_set_drvdata(dev, priv); + return 0; + } + + rc = PTR_ERR(priv); + + disable: + pci_disable_device(dev); + return rc; +} + +static void __devexit pciserial_remove_one(struct pci_dev *dev) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + pci_set_drvdata(dev, NULL); + + pciserial_remove_ports(priv); + + pci_disable_device(dev); +} + +#ifdef CONFIG_PM +static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + if (priv) + pciserial_suspend_ports(priv); + + pci_save_state(dev); + pci_set_power_state(dev, pci_choose_state(dev, state)); + return 0; +} + +static int pciserial_resume_one(struct pci_dev *dev) +{ + int err; + struct serial_private *priv = pci_get_drvdata(dev); + + pci_set_power_state(dev, PCI_D0); + pci_restore_state(dev); + + if (priv) { + /* + * The device may have been disabled. Re-enable it. + */ + err = pci_enable_device(dev); + /* FIXME: We cannot simply error out here */ + if (err) + printk(KERN_ERR "pciserial: Unable to re-enable ports, trying to continue.\n"); + pciserial_resume_ports(priv); + } + return 0; +} +#endif + +static struct pci_device_id serial_pci_tbl[] = { + /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, + PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, + pbn_b2_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, + pbn_b1_8_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, + pbn_b1_4_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, + pbn_b1_2_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, + pbn_b1_8_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, + pbn_b1_4_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, + pbn_b1_2_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0, + pbn_b1_2_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ, 0, 0, + pbn_b1_2_1250000 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2, 0, 0, + pbn_b0_2_1843200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4, 0, 0, + pbn_b0_4_1843200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_VENDOR_ID_AFAVLAB, + PCI_SUBDEVICE_ID_AFAVLAB_P061, 0, 0, + pbn_b0_4_1152000 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232, 0, 0, + pbn_b0_2_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232, 0, 0, + pbn_b0_4_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232, 0, 0, + pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1, 0, 0, + pbn_b0_2_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2, 0, 0, + pbn_b0_4_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4, 0, 0, + pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2, 0, 0, + pbn_b0_2_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4, 0, 0, + pbn_b0_4_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8, 0, 0, + pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485, 0, 0, + pbn_b0_2_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485, 0, 0, + pbn_b0_4_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0, + pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT, + 0, 0, pbn_exar_ibm_saturn }, + + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_1_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_7803, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_115200 }, + + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + /* + * VScom SPCOM800, from sl@s.pl + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_921600 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_4_921600 }, + /* Unknown card - subdevice 0x1584 */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_VENDOR_ID_PLX, + PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0, + pbn_b0_4_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_KEYSPAN, + PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, + pbn_panacom }, + { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_panacom4 }, + { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_panacom2 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_VENDOR_ID_ESDGMBH, + PCI_DEVICE_ID_ESDGMBH_CPCIASIO4, 0, 0, + pbn_b2_4_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, + pbn_b2_4_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, + pbn_b2_16_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, + pbn_b2_16_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIRAS, + PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, + pbn_b2_4_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIRAS, + PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_EXSYS, + PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0, + pbn_exsys_4055 }, + /* + * Megawolf Romulus PCI Serial Card, from Mike Hudson + * (Exoray@isys.ca) + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS, + 0x10b5, 0x106a, 0, 0, + pbn_plx_romulus }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, + 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, + 0, 0, + pbn_b0_4_1152000 }, + { PCI_VENDOR_ID_OXSEMI, 0x9505, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + + /* + * The below card is a little controversial since it is the + * subject of a PCI vendor/device ID clash. (See + * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html). + * For now just used the hex ID 0x950a. + */ + { PCI_VENDOR_ID_OXSEMI, 0x950a, + PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL, 0, 0, + pbn_b0_2_115200 }, + { PCI_VENDOR_ID_OXSEMI, 0x950a, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_2_1130000 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_C950, + PCI_VENDOR_ID_OXSEMI, PCI_SUBDEVICE_ID_OXSEMI_C950, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_115200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958, + PCI_ANY_ID , PCI_ANY_ID, 0, 0, + pbn_b2_8_1152000 }, + + /* + * Oxford Semiconductor Inc. Tornado PCI express device range. + */ + { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + /* + * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado + */ + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0, + pbn_oxsemi_8_4000000 }, + /* + * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, + * from skokodyn@yahoo.com + */ + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0, + pbn_sbsxrsio }, + + /* + * Digitan DS560-558, from jimd@esoft.com + */ + { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_115200 }, + + /* + * Titan Electronic cards + * The 400L and 800L have a custom setup quirk. + */ + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b4_bt_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b4_bt_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b4_bt_8_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400EH, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EH, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800EHB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + + /* + * Computone devices submitted by Doug McNash dmcnash@computone.com + */ + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4, + 0, 0, pbn_computone_4 }, + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8, + 0, 0, pbn_computone_8 }, + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6, + 0, 0, pbn_computone_6 }, + + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi }, + { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889, + PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_921600 }, + + /* + * AFAVLAB serial card, from Harald Welte + */ + { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_115200 }, + { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_115200 }, + + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_460800 }, + + /* + * Korenix Jetcard F0/F1 cards (JC1204, JC1208, JC1404, JC1408). + * Cards are identified by their subsystem vendor IDs, which + * (in hex) match the model number. + * + * Note that JC140x are RS422/485 cards which require ox950 + * ACR = 0x10, and as such are not currently fully supported. + */ + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1204, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, +/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1402, 0x0002, 0, 0, + pbn_b0_2_921600 }, */ +/* { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF0, + 0x1404, 0x0004, 0, 0, + pbn_b0_4_921600 }, */ + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF1, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, + 0x1204, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + /* + * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com + */ + { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_1382400 }, + + /* + * Dell Remote Access Card III - Tim_T_Murphy@Dell.com + */ + { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_1382400 }, + + /* + * RAStel 2 port modem, gerg@moreton.com.au + */ + { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + + /* + * EKF addition for i960 Boards form EKF with serial port + */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP, + 0xE4BF, PCI_ANY_ID, 0, 0, + pbn_intel_i960 }, + + /* + * Xircom Cardbus/Ethernet combos + */ + { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + /* + * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry) + */ + { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + + /* + * Untested PCI modems, sent in from various folks... + */ + + /* + * Elsa Model 56K PCI Modem, from Andreas Rath + */ + { PCI_VENDOR_ID_ROCKWELL, 0x1004, + 0x1048, 0x1500, 0, 0, + pbn_b1_1_115200 }, + + { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, + 0xFF00, 0, 0, 0, + pbn_sgi_ioc3 }, + + /* + * HP Diva card + */ + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, + PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0, + pbn_b1_1_115200 }, + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_5_115200 }, + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_115200 }, + + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_2_115200 }, + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_4_115200 }, + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_8_115200 }, + + /* + * Exar Corp. XR17C15[248] Dual/Quad/Octal UART + */ + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C152 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C154 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C158 }, + + /* + * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) + */ + { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + /* + * ITE + */ + { PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b1_bt_1_115200 }, + + /* + * IntaShield IS-200 + */ + { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */ + pbn_b2_2_115200 }, + /* + * IntaShield IS-400 + */ + { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ + pbn_b2_4_115200 }, + /* + * Perle PCI-RAS cards + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS4, + 0, 0, pbn_b2_4_921600 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, + PCI_SUBVENDOR_ID_PERLE, PCI_SUBDEVICE_ID_PCI_RAS8, + 0, 0, pbn_b2_8_921600 }, + + /* + * Mainpine series cards: Fairly standard layout but fools + * parts of the autodetect in some cases and uses otherwise + * unmatched communications subclasses in the PCI Express case + */ + + { /* RockForceDUO */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0200, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceQUATRO */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0300, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceDUO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0400, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceQUATRO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0500, + 0, 0, pbn_b0_4_115200 }, + { /* RockForce+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0600, + 0, 0, pbn_b0_2_115200 }, + { /* RockForce+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0700, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceOCTO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0800, + 0, 0, pbn_b0_8_115200 }, + { /* RockForceDUO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0C00, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceQUARTRO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x0D00, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceOCTO+ */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x1D00, + 0, 0, pbn_b0_8_115200 }, + { /* RockForceD1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2000, + 0, 0, pbn_b0_1_115200 }, + { /* RockForceF1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2100, + 0, 0, pbn_b0_1_115200 }, + { /* RockForceD2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2200, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceF2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2300, + 0, 0, pbn_b0_2_115200 }, + { /* RockForceD4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2400, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceF4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2500, + 0, 0, pbn_b0_4_115200 }, + { /* RockForceD8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2600, + 0, 0, pbn_b0_8_115200 }, + { /* RockForceF8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x2700, + 0, 0, pbn_b0_8_115200 }, + { /* IQ Express D1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3000, + 0, 0, pbn_b0_1_115200 }, + { /* IQ Express F1 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3100, + 0, 0, pbn_b0_1_115200 }, + { /* IQ Express D2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3200, + 0, 0, pbn_b0_2_115200 }, + { /* IQ Express F2 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3300, + 0, 0, pbn_b0_2_115200 }, + { /* IQ Express D4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3400, + 0, 0, pbn_b0_4_115200 }, + { /* IQ Express F4 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3500, + 0, 0, pbn_b0_4_115200 }, + { /* IQ Express D8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3C00, + 0, 0, pbn_b0_8_115200 }, + { /* IQ Express F8 */ + PCI_VENDOR_ID_MAINPINE, PCI_DEVICE_ID_MAINPINE_PBRIDGE, + PCI_VENDOR_ID_MAINPINE, 0x3D00, + 0, 0, pbn_b0_8_115200 }, + + + /* + * PA Semi PA6T-1682M on-chip UART + */ + { PCI_VENDOR_ID_PASEMI, 0xa004, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pasemi_1682M }, + + /* + * National Instruments + */ + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_16_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2324I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI2322I, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_16_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8420_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_4_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8422_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_115200 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_8 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_2328, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_8 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8430_23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_16 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8430_23216, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_16 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2322, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_2 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PXI8432_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + { PCI_VENDOR_ID_NI, PCI_DEVICE_ID_NI_PCI8432_2324, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ni8430_4 }, + + /* + * ADDI-DATA GmbH communication cards + */ + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7500, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_4_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7420, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_2_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7300, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_ADDIDATA_OLD, + PCI_DEVICE_ID_ADDIDATA_APCI7800, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b1_8_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7500_2, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_4_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7420_2, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_2_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7300_2, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7500_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_4_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7420_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_2_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7300_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCI7800_3, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_b0_8_115200 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7500, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_4_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7420, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_2_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7300, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_1_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7800, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_8_3906250 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, + PCI_VENDOR_ID_IBM, 0x0299, + 0, 0, pbn_b0_bt_2_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + /* + * Best Connectivity PCI Multi I/O cards + */ + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x3004, + 0, 0, pbn_b0_bt_4_115200 }, + /* Intel CE4100 */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_ce4100_1_115200 }, + + + /* + * These entries match devices with class COMMUNICATION_SERIAL, + * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL + */ + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, + 0xffff00, pbn_default }, + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MODEM << 8, + 0xffff00, pbn_default }, + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, + 0xffff00, pbn_default }, + { 0, } +}; + +static struct pci_driver serial_pci_driver = { + .name = "serial", + .probe = pciserial_init_one, + .remove = __devexit_p(pciserial_remove_one), +#ifdef CONFIG_PM + .suspend = pciserial_suspend_one, + .resume = pciserial_resume_one, +#endif + .id_table = serial_pci_tbl, +}; + +static int __init serial8250_pci_init(void) +{ + return pci_register_driver(&serial_pci_driver); +} + +static void __exit serial8250_pci_exit(void) +{ + pci_unregister_driver(&serial_pci_driver); +} + +module_init(serial8250_pci_init); +module_exit(serial8250_pci_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module"); +MODULE_DEVICE_TABLE(pci, serial_pci_tbl); diff --git a/drivers/tty/serial/8250_pnp.c b/drivers/tty/serial/8250_pnp.c new file mode 100644 index 000000000000..4822cb50cd0f --- /dev/null +++ b/drivers/tty/serial/8250_pnp.c @@ -0,0 +1,523 @@ +/* + * linux/drivers/char/8250_pnp.c + * + * Probe module for 8250/16550-type ISAPNP serial ports. + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + * + * Ported to the Linux PnP Layer - (C) Adam Belay. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "8250.h" + +#define UNKNOWN_DEV 0x3000 + + +static const struct pnp_device_id pnp_dev_table[] = { + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "AAC000F", 0 }, + /* Anchor Datacomm BV */ + /* SXPro 144 External Data Fax Modem Plug & Play */ + { "ADC0001", 0 }, + /* SXPro 288 External Data Fax Modem Plug & Play */ + { "ADC0002", 0 }, + /* PROLiNK 1456VH ISA PnP K56flex Fax Modem */ + { "AEI0250", 0 }, + /* Actiontec ISA PNP 56K X2 Fax Modem */ + { "AEI1240", 0 }, + /* Rockwell 56K ACF II Fax+Data+Voice Modem */ + { "AKY1021", 0 /*SPCI_FL_NO_SHIRQ*/ }, + /* AZT3005 PnP SOUND DEVICE */ + { "AZT4001", 0 }, + /* Best Data Products Inc. Smart One 336F PnP Modem */ + { "BDP3336", 0 }, + /* Boca Research */ + /* Boca Complete Ofc Communicator 14.4 Data-FAX */ + { "BRI0A49", 0 }, + /* Boca Research 33,600 ACF Modem */ + { "BRI1400", 0 }, + /* Boca 33.6 Kbps Internal FD34FSVD */ + { "BRI3400", 0 }, + /* Boca 33.6 Kbps Internal FD34FSVD */ + { "BRI0A49", 0 }, + /* Best Data Products Inc. Smart One 336F PnP Modem */ + { "BDP3336", 0 }, + /* Computer Peripherals Inc */ + /* EuroViVa CommCenter-33.6 SP PnP */ + { "CPI4050", 0 }, + /* Creative Labs */ + /* Creative Labs Phone Blaster 28.8 DSVD PnP Voice */ + { "CTL3001", 0 }, + /* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */ + { "CTL3011", 0 }, + /* Davicom ISA 33.6K Modem */ + { "DAV0336", 0 }, + /* Creative */ + /* Creative Modem Blaster Flash56 DI5601-1 */ + { "DMB1032", 0 }, + /* Creative Modem Blaster V.90 DI5660 */ + { "DMB2001", 0 }, + /* E-Tech */ + /* E-Tech CyberBULLET PC56RVP */ + { "ETT0002", 0 }, + /* FUJITSU */ + /* Fujitsu 33600 PnP-I2 R Plug & Play */ + { "FUJ0202", 0 }, + /* Fujitsu FMV-FX431 Plug & Play */ + { "FUJ0205", 0 }, + /* Fujitsu 33600 PnP-I4 R Plug & Play */ + { "FUJ0206", 0 }, + /* Fujitsu Fax Voice 33600 PNP-I5 R Plug & Play */ + { "FUJ0209", 0 }, + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "GVC000F", 0 }, + /* Archtek SmartLink Modem 3334BRV 33.6K Data Fax Voice */ + { "GVC0303", 0 }, + /* Hayes */ + /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */ + { "HAY0001", 0 }, + /* Hayes Optima 336 V.34 + FAX + Voice PnP */ + { "HAY000C", 0 }, + /* Hayes Optima 336B V.34 + FAX + Voice PnP */ + { "HAY000D", 0 }, + /* Hayes Accura 56K Ext Fax Modem PnP */ + { "HAY5670", 0 }, + /* Hayes Accura 56K Ext Fax Modem PnP */ + { "HAY5674", 0 }, + /* Hayes Accura 56K Fax Modem PnP */ + { "HAY5675", 0 }, + /* Hayes 288, V.34 + FAX */ + { "HAYF000", 0 }, + /* Hayes Optima 288 V.34 + FAX + Voice, Plug & Play */ + { "HAYF001", 0 }, + /* IBM */ + /* IBM Thinkpad 701 Internal Modem Voice */ + { "IBM0033", 0 }, + /* Intertex */ + /* Intertex 28k8 33k6 Voice EXT PnP */ + { "IXDC801", 0 }, + /* Intertex 33k6 56k Voice EXT PnP */ + { "IXDC901", 0 }, + /* Intertex 28k8 33k6 Voice SP EXT PnP */ + { "IXDD801", 0 }, + /* Intertex 33k6 56k Voice SP EXT PnP */ + { "IXDD901", 0 }, + /* Intertex 28k8 33k6 Voice SP INT PnP */ + { "IXDF401", 0 }, + /* Intertex 28k8 33k6 Voice SP EXT PnP */ + { "IXDF801", 0 }, + /* Intertex 33k6 56k Voice SP EXT PnP */ + { "IXDF901", 0 }, + /* Kortex International */ + /* KORTEX 28800 Externe PnP */ + { "KOR4522", 0 }, + /* KXPro 33.6 Vocal ASVD PnP */ + { "KORF661", 0 }, + /* Lasat */ + /* LASAT Internet 33600 PnP */ + { "LAS4040", 0 }, + /* Lasat Safire 560 PnP */ + { "LAS4540", 0 }, + /* Lasat Safire 336 PnP */ + { "LAS5440", 0 }, + /* Microcom, Inc. */ + /* Microcom TravelPorte FAST V.34 Plug & Play */ + { "MNP0281", 0 }, + /* Microcom DeskPorte V.34 FAST or FAST+ Plug & Play */ + { "MNP0336", 0 }, + /* Microcom DeskPorte FAST EP 28.8 Plug & Play */ + { "MNP0339", 0 }, + /* Microcom DeskPorte 28.8P Plug & Play */ + { "MNP0342", 0 }, + /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ + { "MNP0500", 0 }, + /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ + { "MNP0501", 0 }, + /* Microcom DeskPorte 28.8S Internal Plug & Play */ + { "MNP0502", 0 }, + /* Motorola */ + /* Motorola BitSURFR Plug & Play */ + { "MOT1105", 0 }, + /* Motorola TA210 Plug & Play */ + { "MOT1111", 0 }, + /* Motorola HMTA 200 (ISDN) Plug & Play */ + { "MOT1114", 0 }, + /* Motorola BitSURFR Plug & Play */ + { "MOT1115", 0 }, + /* Motorola Lifestyle 28.8 Internal */ + { "MOT1190", 0 }, + /* Motorola V.3400 Plug & Play */ + { "MOT1501", 0 }, + /* Motorola Lifestyle 28.8 V.34 Plug & Play */ + { "MOT1502", 0 }, + /* Motorola Power 28.8 V.34 Plug & Play */ + { "MOT1505", 0 }, + /* Motorola ModemSURFR External 28.8 Plug & Play */ + { "MOT1509", 0 }, + /* Motorola Premier 33.6 Desktop Plug & Play */ + { "MOT150A", 0 }, + /* Motorola VoiceSURFR 56K External PnP */ + { "MOT150F", 0 }, + /* Motorola ModemSURFR 56K External PnP */ + { "MOT1510", 0 }, + /* Motorola ModemSURFR 56K Internal PnP */ + { "MOT1550", 0 }, + /* Motorola ModemSURFR Internal 28.8 Plug & Play */ + { "MOT1560", 0 }, + /* Motorola Premier 33.6 Internal Plug & Play */ + { "MOT1580", 0 }, + /* Motorola OnlineSURFR 28.8 Internal Plug & Play */ + { "MOT15B0", 0 }, + /* Motorola VoiceSURFR 56K Internal PnP */ + { "MOT15F0", 0 }, + /* Com 1 */ + /* Deskline K56 Phone System PnP */ + { "MVX00A1", 0 }, + /* PC Rider K56 Phone System PnP */ + { "MVX00F2", 0 }, + /* NEC 98NOTE SPEAKER PHONE FAX MODEM(33600bps) */ + { "nEC8241", 0 }, + /* Pace 56 Voice Internal Plug & Play Modem */ + { "PMC2430", 0 }, + /* Generic */ + /* Generic standard PC COM port */ + { "PNP0500", 0 }, + /* Generic 16550A-compatible COM port */ + { "PNP0501", 0 }, + /* Compaq 14400 Modem */ + { "PNPC000", 0 }, + /* Compaq 2400/9600 Modem */ + { "PNPC001", 0 }, + /* Dial-Up Networking Serial Cable between 2 PCs */ + { "PNPC031", 0 }, + /* Dial-Up Networking Parallel Cable between 2 PCs */ + { "PNPC032", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC100", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC101", 0 }, + /* Standard 28800 bps Modem*/ + { "PNPC102", 0 }, + /* Standard Modem*/ + { "PNPC103", 0 }, + /* Standard 9600 bps Modem*/ + { "PNPC104", 0 }, + /* Standard 14400 bps Modem*/ + { "PNPC105", 0 }, + /* Standard 28800 bps Modem*/ + { "PNPC106", 0 }, + /* Standard Modem */ + { "PNPC107", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC108", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC109", 0 }, + /* Standard 28800 bps Modem */ + { "PNPC10A", 0 }, + /* Standard Modem */ + { "PNPC10B", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC10C", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC10D", 0 }, + /* Standard 28800 bps Modem */ + { "PNPC10E", 0 }, + /* Standard Modem */ + { "PNPC10F", 0 }, + /* Standard PCMCIA Card Modem */ + { "PNP2000", 0 }, + /* Rockwell */ + /* Modular Technology */ + /* Rockwell 33.6 DPF Internal PnP */ + /* Modular Technology 33.6 Internal PnP */ + { "ROK0030", 0 }, + /* Kortex International */ + /* KORTEX 14400 Externe PnP */ + { "ROK0100", 0 }, + /* Rockwell 28.8 */ + { "ROK4120", 0 }, + /* Viking Components, Inc */ + /* Viking 28.8 INTERNAL Fax+Data+Voice PnP */ + { "ROK4920", 0 }, + /* Rockwell */ + /* British Telecom */ + /* Modular Technology */ + /* Rockwell 33.6 DPF External PnP */ + /* BT Prologue 33.6 External PnP */ + /* Modular Technology 33.6 External PnP */ + { "RSS00A0", 0 }, + /* Viking 56K FAX INT */ + { "RSS0262", 0 }, + /* K56 par,VV,Voice,Speakphone,AudioSpan,PnP */ + { "RSS0250", 0 }, + /* SupraExpress 28.8 Data/Fax PnP modem */ + { "SUP1310", 0 }, + /* SupraExpress 336i PnP Voice Modem */ + { "SUP1381", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1421", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1590", 0 }, + /* SupraExpress 336i Sp ASVD */ + { "SUP1620", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1760", 0 }, + /* SupraExpress 56i Sp Intl */ + { "SUP2171", 0 }, + /* Phoebe Micro */ + /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */ + { "TEX0011", 0 }, + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "UAC000F", 0 }, + /* 3Com Corp. */ + /* Gateway Telepath IIvi 33.6 */ + { "USR0000", 0 }, + /* U.S. Robotics Sporster 33.6K Fax INT PnP */ + { "USR0002", 0 }, + /* Sportster Vi 14.4 PnP FAX Voicemail */ + { "USR0004", 0 }, + /* U.S. Robotics 33.6K Voice INT PnP */ + { "USR0006", 0 }, + /* U.S. Robotics 33.6K Voice EXT PnP */ + { "USR0007", 0 }, + /* U.S. Robotics Courier V.Everything INT PnP */ + { "USR0009", 0 }, + /* U.S. Robotics 33.6K Voice INT PnP */ + { "USR2002", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR2070", 0 }, + /* U.S. Robotics 56K Voice EXT PnP */ + { "USR2080", 0 }, + /* U.S. Robotics 56K FAX INT */ + { "USR3031", 0 }, + /* U.S. Robotics 56K FAX INT */ + { "USR3050", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR3070", 0 }, + /* U.S. Robotics 56K Voice EXT PnP */ + { "USR3080", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR3090", 0 }, + /* U.S. Robotics 56K Message */ + { "USR9100", 0 }, + /* U.S. Robotics 56K FAX EXT PnP*/ + { "USR9160", 0 }, + /* U.S. Robotics 56K FAX INT PnP*/ + { "USR9170", 0 }, + /* U.S. Robotics 56K Voice EXT PnP*/ + { "USR9180", 0 }, + /* U.S. Robotics 56K Voice INT PnP*/ + { "USR9190", 0 }, + /* Wacom tablets */ + { "WACFXXX", 0 }, + /* Compaq touchscreen */ + { "FPI2002", 0 }, + /* Fujitsu Stylistic touchscreens */ + { "FUJ02B2", 0 }, + { "FUJ02B3", 0 }, + /* Fujitsu Stylistic LT touchscreens */ + { "FUJ02B4", 0 }, + /* Passive Fujitsu Stylistic touchscreens */ + { "FUJ02B6", 0 }, + { "FUJ02B7", 0 }, + { "FUJ02B8", 0 }, + { "FUJ02B9", 0 }, + { "FUJ02BC", 0 }, + /* Fujitsu Wacom Tablet PC device */ + { "FUJ02E5", 0 }, + /* Fujitsu P-series tablet PC device */ + { "FUJ02E6", 0 }, + /* Fujitsu Wacom 2FGT Tablet PC device */ + { "FUJ02E7", 0 }, + /* Fujitsu Wacom 1FGT Tablet PC device */ + { "FUJ02E9", 0 }, + /* + * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in + * disguise) + */ + { "LTS0001", 0 }, + /* Rockwell's (PORALiNK) 33600 INT PNP */ + { "WCI0003", 0 }, + /* Unknown PnP modems */ + { "PNPCXXX", UNKNOWN_DEV }, + /* More unknown PnP modems */ + { "PNPDXXX", UNKNOWN_DEV }, + { "", 0 } +}; + +MODULE_DEVICE_TABLE(pnp, pnp_dev_table); + +static char *modem_names[] __devinitdata = { + "MODEM", "Modem", "modem", "FAX", "Fax", "fax", + "56K", "56k", "K56", "33.6", "28.8", "14.4", + "33,600", "28,800", "14,400", "33.600", "28.800", "14.400", + "33600", "28800", "14400", "V.90", "V.34", "V.32", NULL +}; + +static int __devinit check_name(char *name) +{ + char **tmp; + + for (tmp = modem_names; *tmp; tmp++) + if (strstr(name, *tmp)) + return 1; + + return 0; +} + +static int __devinit check_resources(struct pnp_dev *dev) +{ + resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8}; + int i; + + for (i = 0; i < ARRAY_SIZE(base); i++) { + if (pnp_possible_config(dev, IORESOURCE_IO, base[i], 8)) + return 1; + } + + return 0; +} + +/* + * Given a complete unknown PnP device, try to use some heuristics to + * detect modems. Currently use such heuristic set: + * - dev->name or dev->bus->name must contain "modem" substring; + * - device must have only one IO region (8 byte long) with base address + * 0x2e8, 0x3e8, 0x2f8 or 0x3f8. + * + * Such detection looks very ugly, but can detect at least some of numerous + * PnP modems, alternatively we must hardcode all modems in pnp_devices[] + * table. + */ +static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags) +{ + if (!(check_name(pnp_dev_name(dev)) || + (dev->card && check_name(dev->card->name)))) + return -ENODEV; + + if (check_resources(dev)) + return 0; + + return -ENODEV; +} + +static int __devinit +serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) +{ + struct uart_port port; + int ret, line, flags = dev_id->driver_data; + + if (flags & UNKNOWN_DEV) { + ret = serial_pnp_guess_board(dev, &flags); + if (ret < 0) + return ret; + } + + memset(&port, 0, sizeof(struct uart_port)); + if (pnp_irq_valid(dev, 0)) + port.irq = pnp_irq(dev, 0); + if (pnp_port_valid(dev, 0)) { + port.iobase = pnp_port_start(dev, 0); + port.iotype = UPIO_PORT; + } else if (pnp_mem_valid(dev, 0)) { + port.mapbase = pnp_mem_start(dev, 0); + port.iotype = UPIO_MEM; + port.flags = UPF_IOREMAP; + } else + return -ENODEV; + +#ifdef SERIAL_DEBUG_PNP + printk(KERN_DEBUG + "Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n", + port.iobase, port.mapbase, port.irq, port.iotype); +#endif + + port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE) + port.flags |= UPF_SHARE_IRQ; + port.uartclk = 1843200; + port.dev = &dev->dev; + + line = serial8250_register_port(&port); + if (line < 0) + return -ENODEV; + + pnp_set_drvdata(dev, (void *)((long)line + 1)); + return 0; +} + +static void __devexit serial_pnp_remove(struct pnp_dev *dev) +{ + long line = (long)pnp_get_drvdata(dev); + if (line) + serial8250_unregister_port(line - 1); +} + +#ifdef CONFIG_PM +static int serial_pnp_suspend(struct pnp_dev *dev, pm_message_t state) +{ + long line = (long)pnp_get_drvdata(dev); + + if (!line) + return -ENODEV; + serial8250_suspend_port(line - 1); + return 0; +} + +static int serial_pnp_resume(struct pnp_dev *dev) +{ + long line = (long)pnp_get_drvdata(dev); + + if (!line) + return -ENODEV; + serial8250_resume_port(line - 1); + return 0; +} +#else +#define serial_pnp_suspend NULL +#define serial_pnp_resume NULL +#endif /* CONFIG_PM */ + +static struct pnp_driver serial_pnp_driver = { + .name = "serial", + .probe = serial_pnp_probe, + .remove = __devexit_p(serial_pnp_remove), + .suspend = serial_pnp_suspend, + .resume = serial_pnp_resume, + .id_table = pnp_dev_table, +}; + +static int __init serial8250_pnp_init(void) +{ + return pnp_register_driver(&serial_pnp_driver); +} + +static void __exit serial8250_pnp_exit(void) +{ + pnp_unregister_driver(&serial_pnp_driver); +} + +module_init(serial8250_pnp_init); +module_exit(serial8250_pnp_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 PnP serial driver"); diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig new file mode 100644 index 000000000000..c1df7676a73d --- /dev/null +++ b/drivers/tty/serial/Kconfig @@ -0,0 +1,1598 @@ +# +# Serial device configuration +# + +menu "Serial drivers" + depends on HAS_IOMEM + +# +# The new 8250/16550 serial drivers +config SERIAL_8250 + tristate "8250/16550 and compatible serial support" + select SERIAL_CORE + ---help--- + This selects whether you want to include the driver for the standard + serial ports. The standard answer is Y. People who might say N + here are those that are setting up dedicated Ethernet WWW/FTP + servers, or users that have one of the various bus mice instead of a + serial mouse and don't intend to use their machine's standard serial + port for anything. (Note that the Cyclades and Stallion multi + serial port drivers do not need this driver built in for them to + work.) + + To compile this driver as a module, choose M here: the + module will be called 8250. + [WARNING: Do not compile this driver as a module if you are using + non-standard serial ports, since the configuration information will + be lost when the driver is unloaded. This limitation may be lifted + in the future.] + + BTW1: If you have a mouseman serial mouse which is not recognized by + the X window system, try running gpm first. + + BTW2: If you intend to use a software modem (also called Winmodem) + under Linux, forget it. These modems are crippled and require + proprietary drivers which are only available under Windows. + + Most people will say Y or M here, so that they can use serial mice, + modems and similar devices connecting to the standard serial ports. + +config SERIAL_8250_CONSOLE + bool "Console on 8250/16550 and compatible serial port" + depends on SERIAL_8250=y + select SERIAL_CORE_CONSOLE + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). This could be useful if some terminal or printer is connected + to that serial port. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyS1". (Try "man bootparam" or see the documentation of + your boot loader (grub or lilo or loadlin) about how to pass options + to the kernel at boot time.) + + If you don't have a VGA card installed and you say Y here, the + kernel will automatically use the first serial line, /dev/ttyS0, as + system console. + + You can set that using a kernel command line option such as + "console=uart8250,io,0x3f8,9600n8" + "console=uart8250,mmio,0xff5e0000,115200n8". + and it will switch to normal serial console when the corresponding + port is ready. + "earlycon=uart8250,io,0x3f8,9600n8" + "earlycon=uart8250,mmio,0xff5e0000,115200n8". + it will not only setup early console. + + If unsure, say N. + +config FIX_EARLYCON_MEM + bool + depends on X86 + default y + +config SERIAL_8250_GSC + tristate + depends on SERIAL_8250 && GSC + default SERIAL_8250 + +config SERIAL_8250_PCI + tristate "8250/16550 PCI device support" if EMBEDDED + depends on SERIAL_8250 && PCI + default SERIAL_8250 + help + This builds standard PCI serial support. You may be able to + disable this feature if you only need legacy serial support. + Saves about 9K. + +config SERIAL_8250_PNP + tristate "8250/16550 PNP device support" if EMBEDDED + depends on SERIAL_8250 && PNP + default SERIAL_8250 + help + This builds standard PNP serial support. You may be able to + disable this feature if you only need legacy serial support. + +config SERIAL_8250_HP300 + tristate + depends on SERIAL_8250 && HP300 + default SERIAL_8250 + +config SERIAL_8250_CS + tristate "8250/16550 PCMCIA device support" + depends on PCMCIA && SERIAL_8250 + ---help--- + Say Y here to enable support for 16-bit PCMCIA serial devices, + including serial port cards, modems, and the modem functions of + multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are + credit-card size devices often used with laptops.) + + To compile this driver as a module, choose M here: the + module will be called serial_cs. + + If unsure, say N. + +config SERIAL_8250_NR_UARTS + int "Maximum number of 8250/16550 serial ports" + depends on SERIAL_8250 + default "4" + help + Set this to the number of serial ports you want the driver + to support. This includes any ports discovered via ACPI or + PCI enumeration and any ports that may be added at run-time + via hot-plug, or any ISA multi-port serial cards. + +config SERIAL_8250_RUNTIME_UARTS + int "Number of 8250/16550 serial ports to register at runtime" + depends on SERIAL_8250 + range 0 SERIAL_8250_NR_UARTS + default "4" + help + Set this to the maximum number of serial ports you want + the kernel to register at boot time. This can be overridden + with the module parameter "nr_uarts", or boot-time parameter + 8250.nr_uarts + +config SERIAL_8250_EXTENDED + bool "Extended 8250/16550 serial driver options" + depends on SERIAL_8250 + help + If you wish to use any non-standard features of the standard "dumb" + driver, say Y here. This includes HUB6 support, shared serial + interrupts, special multiport support, support for more than the + four COM 1/2/3/4 boards, etc. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about serial driver options. If unsure, say N. + +config SERIAL_8250_MANY_PORTS + bool "Support more than 4 legacy serial ports" + depends on SERIAL_8250_EXTENDED && !IA64 + help + Say Y here if you have dumb serial boards other than the four + standard COM 1/2/3/4 ports. This may happen if you have an AST + FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available + from ), or other custom + serial port hardware which acts similar to standard serial port + hardware. If you only use the standard COM 1/2/3/4 ports, you can + say N here to save some memory. You can also say Y if you have an + "intelligent" multiport card such as Cyclades, Digiboards, etc. + +# +# Multi-port serial cards +# + +config SERIAL_8250_FOURPORT + tristate "Support Fourport cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have an AST FourPort serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_fourport. + +config SERIAL_8250_ACCENT + tristate "Support Accent cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have an Accent Async serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_accent. + +config SERIAL_8250_BOCA + tristate "Support Boca cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have a Boca serial board. Please read the Boca + mini-HOWTO, available from + + To compile this driver as a module, choose M here: the module + will be called 8250_boca. + +config SERIAL_8250_EXAR_ST16C554 + tristate "Support Exar ST16C554/554D Quad UART" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + The Uplogix Envoy TU301 uses this Exar Quad UART. If you are + tinkering with your Envoy TU301, or have a machine with this UART, + say Y here. + + To compile this driver as a module, choose M here: the module + will be called 8250_exar_st16c554. + +config SERIAL_8250_HUB6 + tristate "Support Hub6 cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have a HUB6 serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_hub6. + +config SERIAL_8250_SHARE_IRQ + bool "Support for sharing serial interrupts" + depends on SERIAL_8250_EXTENDED + help + Some serial boards have hardware support which allows multiple dumb + serial ports on the same board to share a single IRQ. To enable + support for this in the serial driver, say Y here. + +config SERIAL_8250_DETECT_IRQ + bool "Autodetect IRQ on standard ports (unsafe)" + depends on SERIAL_8250_EXTENDED + help + Say Y here if you want the kernel to try to guess which IRQ + to use for your serial port. + + This is considered unsafe; it is far better to configure the IRQ in + a boot script using the setserial command. + + If unsure, say N. + +config SERIAL_8250_RSA + bool "Support RSA serial ports" + depends on SERIAL_8250_EXTENDED + help + ::: To be written ::: + +config SERIAL_8250_MCA + tristate "Support 8250-type ports on MCA buses" + depends on SERIAL_8250 != n && MCA + help + Say Y here if you have a MCA serial ports. + + To compile this driver as a module, choose M here: the module + will be called 8250_mca. + +config SERIAL_8250_ACORN + tristate "Acorn expansion card serial port support" + depends on ARCH_ACORN && SERIAL_8250 + help + If you have an Atomwide Serial card or Serial Port card for an Acorn + system, say Y to this option. The driver can handle 1, 2, or 3 port + cards. If unsure, say N. + +config SERIAL_8250_RM9K + bool "Support for MIPS RM9xxx integrated serial port" + depends on SERIAL_8250 != n && SERIAL_RM9000 + select SERIAL_8250_SHARE_IRQ + help + Selecting this option will add support for the integrated serial + port hardware found on MIPS RM9122 and similar processors. + If unsure, say N. + +comment "Non-8250 serial port support" + +config SERIAL_AMBA_PL010 + tristate "ARM AMBA PL010 serial port support" + depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) + select SERIAL_CORE + help + This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have + an Integrator/AP or Integrator/PP2 platform, or if you have a + Cirrus Logic EP93xx CPU, say Y or M here. + + If unsure, say N. + +config SERIAL_AMBA_PL010_CONSOLE + bool "Support for console on AMBA serial port" + depends on SERIAL_AMBA_PL010=y + select SERIAL_CORE_CONSOLE + ---help--- + Say Y here if you wish to use an AMBA PrimeCell UART as the system + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + + Even if you say Y here, the currently visible framebuffer console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyAM0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_AMBA_PL011 + tristate "ARM AMBA PL011 serial port support" + depends on ARM_AMBA + select SERIAL_CORE + help + This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have + an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M + here. + + If unsure, say N. + +config SERIAL_AMBA_PL011_CONSOLE + bool "Support for console on AMBA serial port" + depends on SERIAL_AMBA_PL011=y + select SERIAL_CORE_CONSOLE + ---help--- + Say Y here if you wish to use an AMBA PrimeCell UART as the system + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + + Even if you say Y here, the currently visible framebuffer console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyAMA0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_SB1250_DUART + tristate "BCM1xxx on-chip DUART serial support" + depends on SIBYTE_SB1xxx_SOC=y + select SERIAL_CORE + default y + ---help--- + Support for the asynchronous serial interface (DUART) included in + the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that + the letter D in DUART stands for "dual", which is how the device + is implemented. Depending on the SOC configuration there may be + one or more DUARTs available of which all are handled. + + If unsure, say Y. To compile this driver as a module, choose M here: + the module will be called sb1250-duart. + +config SERIAL_SB1250_DUART_CONSOLE + bool "Support for console on a BCM1xxx DUART serial port" + depends on SERIAL_SB1250_DUART=y + select SERIAL_CORE_CONSOLE + default y + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). + + If unsure, say Y. + +config SERIAL_ATMEL + bool "AT91 / AT32 on-chip serial port support" + depends on (ARM && ARCH_AT91) || AVR32 + select SERIAL_CORE + help + This enables the driver for the on-chip UARTs of the Atmel + AT91 and AT32 processors. + +config SERIAL_ATMEL_CONSOLE + bool "Support for console on AT91 / AT32 serial port" + depends on SERIAL_ATMEL=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use an on-chip UART on a Atmel + AT91 or AT32 processor as the system console (the system + console is the device which receives all kernel messages and + warnings and which allows logins in single user mode). + +config SERIAL_ATMEL_PDC + bool "Support DMA transfers on AT91 / AT32 serial port" + depends on SERIAL_ATMEL + default y + help + Say Y here if you wish to use the PDC to do DMA transfers to + and from the Atmel AT91 / AT32 serial port. In order to + actually use DMA transfers, make sure that the use_dma_tx + and use_dma_rx members in the atmel_uart_data struct is set + appropriately for each port. + + Note that break and error handling currently doesn't work + properly when DMA is enabled. Make sure that ports where + this matters don't use DMA. + +config SERIAL_ATMEL_TTYAT + bool "Install as device ttyATn instead of ttySn" + depends on SERIAL_ATMEL=y + help + Say Y here if you wish to have the internal AT91 / AT32 UARTs + appear as /dev/ttyATn (major 204, minor starting at 154) + instead of the normal /dev/ttySn (major 4, minor starting at + 64). This is necessary if you also want other UARTs, such as + external 8250/16C550 compatible UARTs. + The ttySn nodes are legally reserved for the 8250 serial driver + but are often misused by other serial drivers. + + To use this, you should create suitable ttyATn device nodes in + /dev/, and pass "console=ttyATn" to the kernel. + + Say Y if you have an external 8250/16C550 UART. If unsure, say N. + +config SERIAL_KS8695 + bool "Micrel KS8695 (Centaur) serial port support" + depends on ARCH_KS8695 + select SERIAL_CORE + help + This selects the Micrel Centaur KS8695 UART. Say Y here. + +config SERIAL_KS8695_CONSOLE + bool "Support for console on KS8695 (Centaur) serial port" + depends on SERIAL_KS8695=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use a KS8695 (Centaur) UART as the + system console (the system console is the device which + receives all kernel messages and warnings and which allows + logins in single user mode). + +config SERIAL_CLPS711X + tristate "CLPS711X serial port support" + depends on ARM && ARCH_CLPS711X + select SERIAL_CORE + help + ::: To be written ::: + +config SERIAL_CLPS711X_CONSOLE + bool "Support for console on CLPS711X serial port" + depends on SERIAL_CLPS711X=y + select SERIAL_CORE_CONSOLE + help + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyCL1". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_SAMSUNG + tristate "Samsung SoC serial support" + depends on ARM && PLAT_SAMSUNG + select SERIAL_CORE + help + Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, + providing /dev/ttySAC0, 1 and 2 (note, some machines may not + provide all of these ports, depending on how the serial port + pins are configured. + +config SERIAL_SAMSUNG_UARTS_4 + bool + depends on ARM && PLAT_SAMSUNG + default y if CPU_S3C2443 + help + Internal node for the common case of 4 Samsung compatible UARTs + +config SERIAL_SAMSUNG_UARTS + int + depends on ARM && PLAT_SAMSUNG + default 2 if ARCH_S3C2400 + default 6 if ARCH_S5P6450 + default 4 if SERIAL_SAMSUNG_UARTS_4 + default 3 + help + Select the number of available UART ports for the Samsung S3C + serial driver + +config SERIAL_SAMSUNG_DEBUG + bool "Samsung SoC serial debug" + depends on SERIAL_SAMSUNG && DEBUG_LL + help + Add support for debugging the serial driver. Since this is + generally being used as a console, we use our own output + routines that go via the low-level debug printascii() + function. + +config SERIAL_SAMSUNG_CONSOLE + bool "Support for console on Samsung SoC serial port" + depends on SERIAL_SAMSUNG=y + select SERIAL_CORE_CONSOLE + help + Allow selection of the S3C24XX on-board serial ports for use as + an virtual console. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySACx". (Try "man bootparam" or see the documentation of + your boot loader about how to pass options to the kernel at + boot time.) + +config SERIAL_S3C2400 + tristate "Samsung S3C2410 Serial port support" + depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400 + default y if CPU_S3C2400 + help + Serial port support for the Samsung S3C2400 SoC + +config SERIAL_S3C2410 + tristate "Samsung S3C2410 Serial port support" + depends on SERIAL_SAMSUNG && CPU_S3C2410 + default y if CPU_S3C2410 + help + Serial port support for the Samsung S3C2410 SoC + +config SERIAL_S3C2412 + tristate "Samsung S3C2412/S3C2413 Serial port support" + depends on SERIAL_SAMSUNG && CPU_S3C2412 + default y if CPU_S3C2412 + help + Serial port support for the Samsung S3C2412 and S3C2413 SoC + +config SERIAL_S3C2440 + tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416) + default y if CPU_S3C2440 + default y if CPU_S3C2442 + select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416 + help + Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC + +config SERIAL_S3C24A0 + tristate "Samsung S3C24A0 Serial port support" + depends on SERIAL_SAMSUNG && CPU_S3C24A0 + default y if CPU_S3C24A0 + help + Serial port support for the Samsung S3C24A0 SoC + +config SERIAL_S3C6400 + tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) + select SERIAL_SAMSUNG_UARTS_4 + default y + help + Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 + and S5PC100 SoCs + +config SERIAL_S5PV210 + tristate "Samsung S5PV210 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_S5PV310) + select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_S5PV310) + default y + help + Serial port support for Samsung's S5P Family of SoC's + + +config SERIAL_MAX3100 + tristate "MAX3100 support" + depends on SPI + select SERIAL_CORE + help + MAX3100 chip support + +config SERIAL_MAX3107 + tristate "MAX3107 support" + depends on SPI + select SERIAL_CORE + help + MAX3107 chip support + +config SERIAL_MAX3107_AAVA + tristate "MAX3107 AAVA platform support" + depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB + select SERIAL_CORE + help + Support for the MAX3107 chip configuration found on the AAVA + platform. Includes the extra initialisation and GPIO support + neded for this device. + +config SERIAL_DZ + bool "DECstation DZ serial driver" + depends on MACH_DECSTATION && 32BIT + select SERIAL_CORE + default y + ---help--- + DZ11-family serial controllers for DECstations and VAXstations, + including the DC7085, M7814, and M7819. + +config SERIAL_DZ_CONSOLE + bool "Support console on DECstation DZ serial driver" + depends on SERIAL_DZ=y + select SERIAL_CORE_CONSOLE + default y + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). + + Note that the firmware uses ttyS3 as the serial console on + DECstations that use this driver. + + If unsure, say Y. + +config SERIAL_ZS + tristate "DECstation Z85C30 serial support" + depends on MACH_DECSTATION + select SERIAL_CORE + default y + ---help--- + Support for the Zilog 85C350 serial communications controller used + for serial ports in newer DECstation systems. These include the + DECsystem 5900 and all models of the DECstation and DECsystem 5000 + systems except from model 200. + + If unsure, say Y. To compile this driver as a module, choose M here: + the module will be called zs. + +config SERIAL_ZS_CONSOLE + bool "Support for console on a DECstation Z85C30 serial port" + depends on SERIAL_ZS=y + select SERIAL_CORE_CONSOLE + default y + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). + + Note that the firmware uses ttyS1 as the serial console on the + Maxine and ttyS3 on the others using this driver. + + If unsure, say Y. + +config SERIAL_21285 + tristate "DC21285 serial port support" + depends on ARM && FOOTBRIDGE + select SERIAL_CORE + help + If you have a machine based on a 21285 (Footbridge) StrongARM(R)/ + PCI bridge you can enable its onboard serial port by enabling this + option. + +config SERIAL_21285_CONSOLE + bool "Console on DC21285 serial port" + depends on SERIAL_21285=y + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the 21285 footbridge you can + make it the console by answering Y to this option. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyFB". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_MPSC + bool "Marvell MPSC serial port support" + depends on PPC32 && MV64X60 + select SERIAL_CORE + help + Say Y here if you want to use the Marvell MPSC serial controller. + +config SERIAL_MPSC_CONSOLE + bool "Support for console on Marvell MPSC serial port" + depends on SERIAL_MPSC + select SERIAL_CORE_CONSOLE + help + Say Y here if you want to support a serial console on a Marvell MPSC. + +config SERIAL_PXA + bool "PXA serial port support" + depends on ARCH_PXA || ARCH_MMP + select SERIAL_CORE + help + If you have a machine based on an Intel XScale PXA2xx CPU you + can enable its onboard serial ports by enabling this option. + +config SERIAL_PXA_CONSOLE + bool "Console on PXA serial port" + depends on SERIAL_PXA + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the Intel XScale PXA + CPU you can make it the console by answering Y to this option. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySA0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_SA1100 + bool "SA1100 serial port support" + depends on ARM && ARCH_SA1100 + select SERIAL_CORE + help + If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you + can enable its onboard serial port by enabling this option. + Please read for further + info. + +config SERIAL_SA1100_CONSOLE + bool "Console on SA1100 serial port" + depends on SERIAL_SA1100 + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the SA1100/SA1110 StrongARM + CPU you can make it the console by answering Y to this option. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySA0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_MRST_MAX3110 + tristate "SPI UART driver for Max3110" + depends on SPI_DW_PCI + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + help + This is the UART protocol driver for the MAX3110 device on + the Intel Moorestown platform. On other systems use the max3100 + driver. + +config SERIAL_MFD_HSU + tristate "Medfield High Speed UART support" + depends on PCI + select SERIAL_CORE + +config SERIAL_MFD_HSU_CONSOLE + boolean "Medfile HSU serial console support" + depends on SERIAL_MFD_HSU=y + select SERIAL_CORE_CONSOLE + +config SERIAL_BFIN + tristate "Blackfin serial port support" + depends on BLACKFIN + select SERIAL_CORE + select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561) + help + Add support for the built-in UARTs on the Blackfin. + + To compile this driver as a module, choose M here: the + module will be called bfin_5xx. + +config SERIAL_BFIN_CONSOLE + bool "Console on Blackfin serial port" + depends on SERIAL_BFIN=y + select SERIAL_CORE_CONSOLE + +choice + prompt "UART Mode" + depends on SERIAL_BFIN + default SERIAL_BFIN_DMA + help + This driver supports the built-in serial ports of the Blackfin family + of CPUs + +config SERIAL_BFIN_DMA + bool "DMA mode" + depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n + help + This driver works under DMA mode. If this option is selected, the + blackfin simple dma driver is also enabled. + +config SERIAL_BFIN_PIO + bool "PIO mode" + help + This driver works under PIO mode. + +endchoice + +config SERIAL_BFIN_UART0 + bool "Enable UART0" + depends on SERIAL_BFIN + help + Enable UART0 + +config BFIN_UART0_CTSRTS + bool "Enable UART0 hardware flow control" + depends on SERIAL_BFIN_UART0 + help + Enable hardware flow control in the driver. + +config SERIAL_BFIN_UART1 + bool "Enable UART1" + depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561) + help + Enable UART1 + +config BFIN_UART1_CTSRTS + bool "Enable UART1 hardware flow control" + depends on SERIAL_BFIN_UART1 + help + Enable hardware flow control in the driver. + +config SERIAL_BFIN_UART2 + bool "Enable UART2" + depends on SERIAL_BFIN && (BF54x || BF538 || BF539) + help + Enable UART2 + +config BFIN_UART2_CTSRTS + bool "Enable UART2 hardware flow control" + depends on SERIAL_BFIN_UART2 + help + Enable hardware flow control in the driver. + +config SERIAL_BFIN_UART3 + bool "Enable UART3" + depends on SERIAL_BFIN && (BF54x) + help + Enable UART3 + +config BFIN_UART3_CTSRTS + bool "Enable UART3 hardware flow control" + depends on SERIAL_BFIN_UART3 + help + Enable hardware flow control in the driver. + +config SERIAL_IMX + bool "IMX serial port support" + depends on ARM && (ARCH_IMX || ARCH_MXC) + select SERIAL_CORE + select RATIONAL + help + If you have a machine based on a Motorola IMX CPU you + can enable its onboard serial port by enabling this option. + +config SERIAL_IMX_CONSOLE + bool "Console on IMX serial port" + depends on SERIAL_IMX + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the Motorola IMX + CPU you can make it the console by answering Y to this option. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySA0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_UARTLITE + tristate "Xilinx uartlite serial port support" + depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE + select SERIAL_CORE + help + Say Y here if you want to use the Xilinx uartlite serial controller. + + To compile this driver as a module, choose M here: the + module will be called uartlite. + +config SERIAL_UARTLITE_CONSOLE + bool "Support for console on Xilinx uartlite serial port" + depends on SERIAL_UARTLITE=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use a Xilinx uartlite as the system + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + +config SERIAL_SUNCORE + bool + depends on SPARC + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + default y + +config SERIAL_SUNZILOG + tristate "Sun Zilog8530 serial support" + depends on SPARC + help + This driver supports the Zilog8530 serial ports found on many Sparc + systems. Say Y or M if you want to be able to these serial ports. + +config SERIAL_SUNZILOG_CONSOLE + bool "Console on Sun Zilog8530 serial port" + depends on SERIAL_SUNZILOG=y + help + If you would like to be able to use the Zilog8530 serial port + on your Sparc system as the console, you can do so by answering + Y to this option. + +config SERIAL_SUNSU + tristate "Sun SU serial support" + depends on SPARC && PCI + help + This driver supports the 8250 serial ports that run the keyboard and + mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able + to these serial ports. + +config SERIAL_SUNSU_CONSOLE + bool "Console on Sun SU serial port" + depends on SERIAL_SUNSU=y + help + If you would like to be able to use the SU serial port + on your Sparc system as the console, you can do so by answering + Y to this option. + +config SERIAL_MUX + tristate "Serial MUX support" + depends on GSC + select SERIAL_CORE + default y + ---help--- + Saying Y here will enable the hardware MUX serial driver for + the Nova, K class systems and D class with a 'remote control card'. + The hardware MUX is not 8250/16550 compatible therefore the + /dev/ttyB0 device is shared between the Serial MUX and the PDC + software console. The following steps need to be completed to use + the Serial MUX: + + 1. create the device entry (mknod /dev/ttyB0 c 11 0) + 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 + 3. Add device ttyB0 to /etc/securetty (if you want to log on as + root on this console.) + 4. Change the kernel command console parameter to: console=ttyB0 + +config SERIAL_MUX_CONSOLE + bool "Support for console on serial MUX" + depends on SERIAL_MUX=y + select SERIAL_CORE_CONSOLE + default y + +config PDC_CONSOLE + bool "PDC software console support" + depends on PARISC && !SERIAL_MUX && VT + default n + help + Saying Y here will enable the software based PDC console to be + used as the system console. This is useful for machines in + which the hardware based console has not been written yet. The + following steps must be competed to use the PDC console: + + 1. create the device entry (mknod /dev/ttyB0 c 11 0) + 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 + 3. Add device ttyB0 to /etc/securetty (if you want to log on as + root on this console.) + 4. Change the kernel command console parameter to: console=ttyB0 + +config SERIAL_SUNSAB + tristate "Sun Siemens SAB82532 serial support" + depends on SPARC && PCI + help + This driver supports the Siemens SAB82532 DUSCC serial ports on newer + (PCI) UltraSPARC systems. Say Y or M if you want to be able to these + serial ports. + +config SERIAL_SUNSAB_CONSOLE + bool "Console on Sun Siemens SAB82532 serial port" + depends on SERIAL_SUNSAB=y + help + If you would like to be able to use the SAB82532 serial port + on your Sparc system as the console, you can do so by answering + Y to this option. + +config SERIAL_SUNHV + bool "Sun4v Hypervisor Console support" + depends on SPARC64 + help + This driver supports the console device found on SUN4V Sparc + systems. Say Y if you want to be able to use this device. + +config SERIAL_IP22_ZILOG + tristate "SGI Zilog8530 serial support" + depends on SGI_HAS_ZILOG + select SERIAL_CORE + help + This driver supports the Zilog8530 serial ports found on SGI + systems. Say Y or M if you want to be able to these serial ports. + +config SERIAL_IP22_ZILOG_CONSOLE + bool "Console on SGI Zilog8530 serial port" + depends on SERIAL_IP22_ZILOG=y + select SERIAL_CORE_CONSOLE + +config SERIAL_SH_SCI + tristate "SuperH SCI(F) serial port support" + depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE) + select SERIAL_CORE + +config SERIAL_SH_SCI_NR_UARTS + int "Maximum number of SCI(F) serial ports" + depends on SERIAL_SH_SCI + default "2" + +config SERIAL_SH_SCI_CONSOLE + bool "Support for console on SuperH SCI(F)" + depends on SERIAL_SH_SCI=y + select SERIAL_CORE_CONSOLE + +config SERIAL_SH_SCI_DMA + bool "DMA support" + depends on SERIAL_SH_SCI && SH_DMAE && EXPERIMENTAL + +config SERIAL_PNX8XXX + bool "Enable PNX8XXX SoCs' UART Support" + depends on MIPS && (SOC_PNX8550 || SOC_PNX833X) + select SERIAL_CORE + help + If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 + and you want to use serial ports, say Y. Otherwise, say N. + +config SERIAL_PNX8XXX_CONSOLE + bool "Enable PNX8XX0 serial console" + depends on SERIAL_PNX8XXX + select SERIAL_CORE_CONSOLE + help + If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 + and you want to use serial console, say Y. Otherwise, say N. + +config SERIAL_CORE + tristate + +config SERIAL_CORE_CONSOLE + bool + +config CONSOLE_POLL + bool + +config SERIAL_68328 + bool "68328 serial support" + depends on M68328 || M68EZ328 || M68VZ328 + help + This driver supports the built-in serial port of the Motorola 68328 + (standard, EZ and VZ varieties). + +config SERIAL_68328_RTS_CTS + bool "Support RTS/CTS on 68328 serial port" + depends on SERIAL_68328 + +config SERIAL_MCF + bool "Coldfire serial support" + depends on COLDFIRE + select SERIAL_CORE + help + This serial driver supports the Freescale Coldfire serial ports. + +config SERIAL_MCF_BAUDRATE + int "Default baudrate for Coldfire serial ports" + depends on SERIAL_MCF + default 19200 + help + This setting lets you define what the default baudrate is for the + ColdFire serial ports. The usual default varies from board to board, + and this setting is a way of catering for that. + +config SERIAL_MCF_CONSOLE + bool "Coldfire serial console support" + depends on SERIAL_MCF + select SERIAL_CORE_CONSOLE + help + Enable a ColdFire internal serial port to be the system console. + +config SERIAL_68360_SMC + bool "68360 SMC uart support" + depends on M68360 + help + This driver supports the SMC serial ports of the Motorola 68360 CPU. + +config SERIAL_68360_SCC + bool "68360 SCC uart support" + depends on M68360 + help + This driver supports the SCC serial ports of the Motorola 68360 CPU. + +config SERIAL_68360 + bool + depends on SERIAL_68360_SMC || SERIAL_68360_SCC + default y + +config SERIAL_PMACZILOG + tristate "Mac or PowerMac z85c30 ESCC support" + depends on (M68K && MAC) || (PPC_OF && PPC_PMAC) + select SERIAL_CORE + help + This driver supports the Zilog z85C30 serial ports found on + (Power)Mac machines. + Say Y or M if you want to be able to these serial ports. + +config SERIAL_PMACZILOG_TTYS + bool "Use ttySn device nodes for Zilog z85c30" + depends on SERIAL_PMACZILOG + help + The pmac_zilog driver for the z85C30 chip on many powermacs + historically used the device numbers for /dev/ttySn. The + 8250 serial port driver also uses these numbers, which means + the two drivers being unable to coexist; you could not use + both z85C30 and 8250 type ports at the same time. + + If this option is not selected, the pmac_zilog driver will + use the device numbers allocated for /dev/ttyPZn. This allows + the pmac_zilog and 8250 drivers to co-exist, but may cause + existing userspace setups to break. Programs that need to + access the built-in serial ports on powermacs will need to + be reconfigured to use /dev/ttyPZn instead of /dev/ttySn. + + If you enable this option, any z85c30 ports in the system will + be registered as ttyS0 onwards as in the past, and you will be + unable to use the 8250 module for PCMCIA or other 16C550-style + UARTs. + + Say N unless you need the z85c30 ports on your (Power)Mac + to appear as /dev/ttySn. + +config SERIAL_PMACZILOG_CONSOLE + bool "Console on Mac or PowerMac z85c30 serial port" + depends on SERIAL_PMACZILOG=y + select SERIAL_CORE_CONSOLE + help + If you would like to be able to use the z85c30 serial port + on your (Power)Mac as the console, you can do so by answering + Y to this option. + +config SERIAL_LH7A40X + tristate "Sharp LH7A40X embedded UART support" + depends on ARM && ARCH_LH7A40X + select SERIAL_CORE + help + This enables support for the three on-board UARTs of the + Sharp LH7A40X series CPUs. Choose Y or M. + +config SERIAL_LH7A40X_CONSOLE + bool "Support for console on Sharp LH7A40X serial port" + depends on SERIAL_LH7A40X=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use one of the serial ports as the + system console--the system console is the device which + receives all kernel messages and warnings and which allows + logins in single user mode. + + Even if you say Y here, the currently visible framebuffer console + (/dev/tty0) will still be used as the default system console, but + you can alter that using a kernel command line, for example + "console=ttyAM1". + +config SERIAL_CPM + tristate "CPM SCC/SMC serial port support" + depends on CPM2 || 8xx + select SERIAL_CORE + help + This driver supports the SCC and SMC serial ports on Motorola + embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx) + +config SERIAL_CPM_CONSOLE + bool "Support for console on CPM SCC/SMC serial port" + depends on SERIAL_CPM=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use a SCC or SMC CPM UART as the system + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + + Even if you say Y here, the currently visible framebuffer console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyCPM0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_SGI_L1_CONSOLE + bool "SGI Altix L1 serial console support" + depends on IA64_GENERIC || IA64_SGI_SN2 + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + help + If you have an SGI Altix and you would like to use the system + controller serial port as your console (you want this!), + say Y. Otherwise, say N. + +config SERIAL_MPC52xx + tristate "Freescale MPC52xx/MPC512x family PSC serial support" + depends on PPC_MPC52xx || PPC_MPC512x + select SERIAL_CORE + help + This driver supports MPC52xx and MPC512x PSC serial ports. If you would + like to use them, you must answer Y or M to this option. Note that + for use as console, it must be included in kernel and not as a + module. + +config SERIAL_MPC52xx_CONSOLE + bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port" + depends on SERIAL_MPC52xx=y + select SERIAL_CORE_CONSOLE + help + Select this options if you'd like to use one of the PSC serial port + of the Freescale MPC52xx family as a console. + +config SERIAL_MPC52xx_CONSOLE_BAUD + int "Freescale MPC52xx/MPC512x family PSC serial port baud" + depends on SERIAL_MPC52xx_CONSOLE=y + default "9600" + help + Select the MPC52xx console baud rate. + This value is only used if the bootloader doesn't pass in the + console baudrate + +config SERIAL_ICOM + tristate "IBM Multiport Serial Adapter" + depends on PCI && (PPC_ISERIES || PPC_PSERIES) + select SERIAL_CORE + select FW_LOADER + help + This driver is for a family of multiport serial adapters + including 2 port RVX, 2 port internal modem, 4 port internal + modem and a split 1 port RVX and 1 port internal modem. + + This driver can also be built as a module. If so, the module + will be called icom. + +config SERIAL_M32R_SIO + bool "M32R SIO I/F" + depends on M32R + default y + select SERIAL_CORE + help + Say Y here if you want to use the M32R serial controller. + +config SERIAL_M32R_SIO_CONSOLE + bool "use SIO console" + depends on SERIAL_M32R_SIO=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you want to support a serial console. + + If you use an M3T-M32700UT or an OPSPUT platform, + please say also y for SERIAL_M32R_PLDSIO. + +config SERIAL_M32R_PLDSIO + bool "M32R SIO I/F on a PLD" + depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT) + default n + help + Say Y here if you want to use the M32R serial controller + on a PLD (Programmable Logic Device). + + If you use an M3T-M32700UT or an OPSPUT platform, + please say Y. + +config SERIAL_TXX9 + bool "TMPTX39XX/49XX SIO support" + depends on HAS_TXX9_SERIAL + select SERIAL_CORE + default y + +config HAS_TXX9_SERIAL + bool + +config SERIAL_TXX9_NR_UARTS + int "Maximum number of TMPTX39XX/49XX SIO ports" + depends on SERIAL_TXX9 + default "6" + +config SERIAL_TXX9_CONSOLE + bool "TMPTX39XX/49XX SIO Console support" + depends on SERIAL_TXX9=y + select SERIAL_CORE_CONSOLE + +config SERIAL_TXX9_STDSERIAL + bool "TX39XX/49XX SIO act as standard serial" + depends on !SERIAL_8250 && SERIAL_TXX9 + +config SERIAL_VR41XX + tristate "NEC VR4100 series Serial Interface Unit support" + depends on CPU_VR41XX + select SERIAL_CORE + help + If you have a NEC VR4100 series processor and you want to use + Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU) + (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N. + +config SERIAL_VR41XX_CONSOLE + bool "Enable NEC VR4100 series Serial Interface Unit console" + depends on SERIAL_VR41XX=y + select SERIAL_CORE_CONSOLE + help + If you have a NEC VR4100 series processor and you want to use + a console on a serial port, say Y. Otherwise, say N. + +config SERIAL_JSM + tristate "Digi International NEO PCI Support" + depends on PCI + select SERIAL_CORE + help + This is a driver for Digi International's Neo series + of cards which provide multiple serial ports. You would need + something like this to connect more than two modems to your Linux + box, for instance in order to become a dial-in server. This driver + supports PCI boards only. + + If you have a card like this, say Y here, otherwise say N. + + To compile this driver as a module, choose M here: the + module will be called jsm. + +config SERIAL_SGI_IOC4 + tristate "SGI IOC4 controller serial support" + depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4 + select SERIAL_CORE + help + If you have an SGI Altix with an IOC4 based Base IO card + and wish to use the serial ports on this card, say Y. + Otherwise, say N. + +config SERIAL_SGI_IOC3 + tristate "SGI Altix IOC3 serial support" + depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3 + select SERIAL_CORE + help + If you have an SGI Altix with an IOC3 serial card, + say Y or M. Otherwise, say N. + +config SERIAL_MSM + bool "MSM on-chip serial port support" + depends on ARM && ARCH_MSM + select SERIAL_CORE + +config SERIAL_MSM_CONSOLE + bool "MSM serial console support" + depends on SERIAL_MSM=y + select SERIAL_CORE_CONSOLE + +config SERIAL_VT8500 + bool "VIA VT8500 on-chip serial port support" + depends on ARM && ARCH_VT8500 + select SERIAL_CORE + +config SERIAL_VT8500_CONSOLE + bool "VIA VT8500 serial console support" + depends on SERIAL_VT8500=y + select SERIAL_CORE_CONSOLE + +config SERIAL_NETX + tristate "NetX serial port support" + depends on ARM && ARCH_NETX + select SERIAL_CORE + help + If you have a machine based on a Hilscher NetX SoC you + can enable its onboard serial port by enabling this option. + + To compile this driver as a module, choose M here: the + module will be called netx-serial. + +config SERIAL_NETX_CONSOLE + bool "Console on NetX serial port" + depends on SERIAL_NETX=y + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the Hilscher NetX SoC + you can make it the console by answering Y to this option. + +config SERIAL_OF_PLATFORM + tristate "Serial port on Open Firmware platform bus" + depends on OF + depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL + help + If you have a PowerPC based system that has serial ports + on a platform specific bus, you should enable this option. + Currently, only 8250 compatible ports are supported, but + others can easily be added. + +config SERIAL_OMAP + tristate "OMAP serial port support" + depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 + select SERIAL_CORE + help + If you have a machine based on an Texas Instruments OMAP CPU you + can enable its onboard serial ports by enabling this option. + + By enabling this option you take advantage of dma feature available + with the omap-serial driver. DMA support can be enabled from platform + data. + +config SERIAL_OMAP_CONSOLE + bool "Console on OMAP serial port" + depends on SERIAL_OMAP + select SERIAL_CORE_CONSOLE + help + Select this option if you would like to use omap serial port as + console. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyOx". (Try "man bootparam" or see the documentation of + your boot loader about how to pass options to the kernel at + boot time.) + +config SERIAL_OF_PLATFORM_NWPSERIAL + tristate "NWP serial port driver" + depends on PPC_OF && PPC_DCR + select SERIAL_OF_PLATFORM + select SERIAL_CORE_CONSOLE + select SERIAL_CORE + help + This driver supports the cell network processor nwp serial + device. + +config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE + bool "Console on NWP serial port" + depends on SERIAL_OF_PLATFORM_NWPSERIAL=y + select SERIAL_CORE_CONSOLE + help + Support for Console on the NWP serial ports. + +config SERIAL_QE + tristate "Freescale QUICC Engine serial port support" + depends on QUICC_ENGINE + select SERIAL_CORE + select FW_LOADER + default n + help + This driver supports the QE serial ports on Freescale embedded + PowerPC that contain a QUICC Engine. + +config SERIAL_SC26XX + tristate "SC2681/SC2692 serial port support" + depends on SNI_RM + select SERIAL_CORE + help + This is a driver for the onboard serial ports of + older RM400 machines. + +config SERIAL_SC26XX_CONSOLE + bool "Console on SC2681/SC2692 serial port" + depends on SERIAL_SC26XX + select SERIAL_CORE_CONSOLE + help + Support for Console on SC2681/SC2692 serial ports. + +config SERIAL_BFIN_SPORT + tristate "Blackfin SPORT emulate UART" + depends on BLACKFIN + select SERIAL_CORE + help + Enable SPORT emulate UART on Blackfin series. + + To compile this driver as a module, choose M here: the + module will be called bfin_sport_uart. + +config SERIAL_BFIN_SPORT_CONSOLE + bool "Console on Blackfin sport emulated uart" + depends on SERIAL_BFIN_SPORT=y + select SERIAL_CORE_CONSOLE + +config SERIAL_BFIN_SPORT0_UART + bool "Enable UART over SPORT0" + depends on SERIAL_BFIN_SPORT && !(BF542 || BF544) + help + Enable UART over SPORT0 + +config SERIAL_BFIN_SPORT0_UART_CTSRTS + bool "Enable UART over SPORT0 hardware flow control" + depends on SERIAL_BFIN_SPORT0_UART + help + Enable hardware flow control in the driver. + +config SERIAL_BFIN_SPORT1_UART + bool "Enable UART over SPORT1" + depends on SERIAL_BFIN_SPORT + help + Enable UART over SPORT1 + +config SERIAL_BFIN_SPORT1_UART_CTSRTS + bool "Enable UART over SPORT1 hardware flow control" + depends on SERIAL_BFIN_SPORT1_UART + help + Enable hardware flow control in the driver. + +config SERIAL_BFIN_SPORT2_UART + bool "Enable UART over SPORT2" + depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) + help + Enable UART over SPORT2 + +config SERIAL_BFIN_SPORT2_UART_CTSRTS + bool "Enable UART over SPORT2 hardware flow control" + depends on SERIAL_BFIN_SPORT2_UART + help + Enable hardware flow control in the driver. + +config SERIAL_BFIN_SPORT3_UART + bool "Enable UART over SPORT3" + depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) + help + Enable UART over SPORT3 + +config SERIAL_BFIN_SPORT3_UART_CTSRTS + bool "Enable UART over SPORT3 hardware flow control" + depends on SERIAL_BFIN_SPORT3_UART + help + Enable hardware flow control in the driver. + +config SERIAL_TIMBERDALE + tristate "Support for timberdale UART" + select SERIAL_CORE + ---help--- + Add support for UART controller on timberdale. + +config SERIAL_BCM63XX + tristate "bcm63xx serial port support" + select SERIAL_CORE + depends on BCM63XX + help + If you have a bcm63xx CPU, you can enable its onboard + serial port by enabling this options. + + To compile this driver as a module, choose M here: the + module will be called bcm963xx_uart. + +config SERIAL_BCM63XX_CONSOLE + bool "Console on bcm63xx serial port" + depends on SERIAL_BCM63XX=y + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the bcm63xx CPU + you can make it the console by answering Y to this option. + +config SERIAL_GRLIB_GAISLER_APBUART + tristate "GRLIB APBUART serial support" + depends on OF + ---help--- + Add support for the GRLIB APBUART serial port. + +config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE + bool "Console on GRLIB APBUART serial port" + depends on SERIAL_GRLIB_GAISLER_APBUART=y + select SERIAL_CORE_CONSOLE + help + Support for running a console on the GRLIB APBUART + +config SERIAL_ALTERA_JTAGUART + tristate "Altera JTAG UART support" + select SERIAL_CORE + help + This driver supports the Altera JTAG UART port. + +config SERIAL_ALTERA_JTAGUART_CONSOLE + bool "Altera JTAG UART console support" + depends on SERIAL_ALTERA_JTAGUART=y + select SERIAL_CORE_CONSOLE + help + Enable a Altera JTAG UART port to be the system console. + +config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS + bool "Bypass output when no connection" + depends on SERIAL_ALTERA_JTAGUART_CONSOLE + select SERIAL_CORE_CONSOLE + help + Bypass console output and keep going even if there is no + JTAG terminal connection with the host. + +config SERIAL_ALTERA_UART + tristate "Altera UART support" + select SERIAL_CORE + help + This driver supports the Altera softcore UART port. + +config SERIAL_ALTERA_UART_MAXPORTS + int "Maximum number of Altera UART ports" + depends on SERIAL_ALTERA_UART + default 4 + help + This setting lets you define the maximum number of the Altera + UART ports. The usual default varies from board to board, and + this setting is a way of catering for that. + +config SERIAL_ALTERA_UART_BAUDRATE + int "Default baudrate for Altera UART ports" + depends on SERIAL_ALTERA_UART + default 115200 + help + This setting lets you define what the default baudrate is for the + Altera UART ports. The usual default varies from board to board, + and this setting is a way of catering for that. + +config SERIAL_ALTERA_UART_CONSOLE + bool "Altera UART console support" + depends on SERIAL_ALTERA_UART=y + select SERIAL_CORE_CONSOLE + help + Enable a Altera UART port to be the system console. + +config SERIAL_IFX6X60 + tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)" + depends on GPIOLIB && SPI && EXPERIMENTAL + help + Support for the IFX6x60 modem devices on Intel MID platforms. + +config SERIAL_PCH_UART + tristate "Intel EG20T PCH UART" + depends on PCI && DMADEVICES + select SERIAL_CORE + select PCH_DMA + help + This driver is for PCH(Platform controller Hub) UART of Intel EG20T + which is an IOH(Input/Output Hub) for x86 embedded processor. + Enabling PCH_DMA, this PCH UART works as DMA mode. +endmenu diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile new file mode 100644 index 000000000000..8ea92e9c73b0 --- /dev/null +++ b/drivers/tty/serial/Makefile @@ -0,0 +1,94 @@ +# +# Makefile for the kernel serial device drivers. +# + +obj-$(CONFIG_SERIAL_CORE) += serial_core.o +obj-$(CONFIG_SERIAL_21285) += 21285.o + +# These Sparc drivers have to appear before others such as 8250 +# which share ttySx minor node space. Otherwise console device +# names change and other unplesantries. +obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o +obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o +obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o +obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o +obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o + +obj-$(CONFIG_SERIAL_8250) += 8250.o +obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o +obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o +obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o +obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o +obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o +obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o +obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o +obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o +obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o +obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o +obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o +obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o +obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o +obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o +obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o +obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o +obj-$(CONFIG_SERIAL_PXA) += pxa.o +obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o +obj-$(CONFIG_SERIAL_SA1100) += sa1100.o +obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o +obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o +obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o +obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o +obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o +obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o +obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o +obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o +obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o +obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o +obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o +obj-$(CONFIG_SERIAL_MAX3100) += max3100.o +obj-$(CONFIG_SERIAL_MAX3107) += max3107.o +obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o +obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o +obj-$(CONFIG_SERIAL_MUX) += mux.o +obj-$(CONFIG_SERIAL_68328) += 68328serial.o +obj-$(CONFIG_SERIAL_68360) += 68360serial.o +obj-$(CONFIG_SERIAL_MCF) += mcf.o +obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o +obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o +obj-$(CONFIG_SERIAL_DZ) += dz.o +obj-$(CONFIG_SERIAL_ZS) += zs.o +obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o +obj-$(CONFIG_SERIAL_SGI_L1_CONSOLE) += sn_console.o +obj-$(CONFIG_SERIAL_CPM) += cpm_uart/ +obj-$(CONFIG_SERIAL_IMX) += imx.o +obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o +obj-$(CONFIG_SERIAL_ICOM) += icom.o +obj-$(CONFIG_SERIAL_M32R_SIO) += m32r_sio.o +obj-$(CONFIG_SERIAL_MPSC) += mpsc.o +obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o +obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o +obj-$(CONFIG_SERIAL_SC26XX) += sc26xx.o +obj-$(CONFIG_SERIAL_JSM) += jsm/ +obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o +obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o +obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o +obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o +obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o +obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o +obj-$(CONFIG_SERIAL_MSM) += msm_serial.o +obj-$(CONFIG_SERIAL_NETX) += netx-serial.o +obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o +obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o +obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o +obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o +obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o +obj-$(CONFIG_SERIAL_QE) += ucc_uart.o +obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o +obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o +obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o +obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o +obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o +obj-$(CONFIG_SERIAL_MRST_MAX3110) += mrst_max3110.o +obj-$(CONFIG_SERIAL_MFD_HSU) += mfd.o +obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o +obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c new file mode 100644 index 000000000000..f9b49b5ff5e1 --- /dev/null +++ b/drivers/tty/serial/altera_jtaguart.c @@ -0,0 +1,504 @@ +/* + * altera_jtaguart.c -- Altera JTAG UART driver + * + * Based on mcf.c -- Freescale ColdFire UART driver + * + * (C) Copyright 2003-2007, Greg Ungerer + * (C) Copyright 2008, Thomas Chou + * (C) Copyright 2010, Tobias Klauser + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "altera_jtaguart" + +/* + * Altera JTAG UART register definitions according to the Altera JTAG UART + * datasheet: http://www.altera.com/literature/hb/nios2/n2cpu_nii51009.pdf + */ + +#define ALTERA_JTAGUART_SIZE 8 + +#define ALTERA_JTAGUART_DATA_REG 0 + +#define ALTERA_JTAGUART_DATA_DATA_MSK 0x000000FF +#define ALTERA_JTAGUART_DATA_RVALID_MSK 0x00008000 +#define ALTERA_JTAGUART_DATA_RAVAIL_MSK 0xFFFF0000 +#define ALTERA_JTAGUART_DATA_RAVAIL_OFF 16 + +#define ALTERA_JTAGUART_CONTROL_REG 4 + +#define ALTERA_JTAGUART_CONTROL_RE_MSK 0x00000001 +#define ALTERA_JTAGUART_CONTROL_WE_MSK 0x00000002 +#define ALTERA_JTAGUART_CONTROL_RI_MSK 0x00000100 +#define ALTERA_JTAGUART_CONTROL_RI_OFF 8 +#define ALTERA_JTAGUART_CONTROL_WI_MSK 0x00000200 +#define ALTERA_JTAGUART_CONTROL_AC_MSK 0x00000400 +#define ALTERA_JTAGUART_CONTROL_WSPACE_MSK 0xFFFF0000 +#define ALTERA_JTAGUART_CONTROL_WSPACE_OFF 16 + +/* + * Local per-uart structure. + */ +struct altera_jtaguart { + struct uart_port port; + unsigned int sigs; /* Local copy of line sigs */ + unsigned long imr; /* Local IMR mirror */ +}; + +static unsigned int altera_jtaguart_tx_empty(struct uart_port *port) +{ + return (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & + ALTERA_JTAGUART_CONTROL_WSPACE_MSK) ? TIOCSER_TEMT : 0; +} + +static unsigned int altera_jtaguart_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +static void altera_jtaguart_set_mctrl(struct uart_port *port, unsigned int sigs) +{ +} + +static void altera_jtaguart_start_tx(struct uart_port *port) +{ + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + + pp->imr |= ALTERA_JTAGUART_CONTROL_WE_MSK; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); +} + +static void altera_jtaguart_stop_tx(struct uart_port *port) +{ + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + + pp->imr &= ~ALTERA_JTAGUART_CONTROL_WE_MSK; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); +} + +static void altera_jtaguart_stop_rx(struct uart_port *port) +{ + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + + pp->imr &= ~ALTERA_JTAGUART_CONTROL_RE_MSK; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); +} + +static void altera_jtaguart_break_ctl(struct uart_port *port, int break_state) +{ +} + +static void altera_jtaguart_enable_ms(struct uart_port *port) +{ +} + +static void altera_jtaguart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + /* Just copy the old termios settings back */ + if (old) + tty_termios_copy_hw(termios, old); +} + +static void altera_jtaguart_rx_chars(struct altera_jtaguart *pp) +{ + struct uart_port *port = &pp->port; + unsigned char ch, flag; + unsigned long status; + + while ((status = readl(port->membase + ALTERA_JTAGUART_DATA_REG)) & + ALTERA_JTAGUART_DATA_RVALID_MSK) { + ch = status & ALTERA_JTAGUART_DATA_DATA_MSK; + flag = TTY_NORMAL; + port->icount.rx++; + + if (uart_handle_sysrq_char(port, ch)) + continue; + uart_insert_char(port, 0, 0, ch, flag); + } + + tty_flip_buffer_push(port->state->port.tty); +} + +static void altera_jtaguart_tx_chars(struct altera_jtaguart *pp) +{ + struct uart_port *port = &pp->port; + struct circ_buf *xmit = &port->state->xmit; + unsigned int pending, count; + + if (port->x_char) { + /* Send special char - probably flow control */ + writel(port->x_char, port->membase + ALTERA_JTAGUART_DATA_REG); + port->x_char = 0; + port->icount.tx++; + return; + } + + pending = uart_circ_chars_pending(xmit); + if (pending > 0) { + count = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & + ALTERA_JTAGUART_CONTROL_WSPACE_MSK) >> + ALTERA_JTAGUART_CONTROL_WSPACE_OFF; + if (count > pending) + count = pending; + if (count > 0) { + pending -= count; + while (count--) { + writel(xmit->buf[xmit->tail], + port->membase + ALTERA_JTAGUART_DATA_REG); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + if (pending < WAKEUP_CHARS) + uart_write_wakeup(port); + } + } + + if (pending == 0) { + pp->imr &= ~ALTERA_JTAGUART_CONTROL_WE_MSK; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); + } +} + +static irqreturn_t altera_jtaguart_interrupt(int irq, void *data) +{ + struct uart_port *port = data; + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + unsigned int isr; + + isr = (readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) >> + ALTERA_JTAGUART_CONTROL_RI_OFF) & pp->imr; + + spin_lock(&port->lock); + + if (isr & ALTERA_JTAGUART_CONTROL_RE_MSK) + altera_jtaguart_rx_chars(pp); + if (isr & ALTERA_JTAGUART_CONTROL_WE_MSK) + altera_jtaguart_tx_chars(pp); + + spin_unlock(&port->lock); + + return IRQ_RETVAL(isr); +} + +static void altera_jtaguart_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_ALTERA_JTAGUART; + + /* Clear mask, so no surprise interrupts. */ + writel(0, port->membase + ALTERA_JTAGUART_CONTROL_REG); +} + +static int altera_jtaguart_startup(struct uart_port *port) +{ + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + unsigned long flags; + int ret; + + ret = request_irq(port->irq, altera_jtaguart_interrupt, IRQF_DISABLED, + DRV_NAME, port); + if (ret) { + pr_err(DRV_NAME ": unable to attach Altera JTAG UART %d " + "interrupt vector=%d\n", port->line, port->irq); + return ret; + } + + spin_lock_irqsave(&port->lock, flags); + + /* Enable RX interrupts now */ + pp->imr = ALTERA_JTAGUART_CONTROL_RE_MSK; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void altera_jtaguart_shutdown(struct uart_port *port) +{ + struct altera_jtaguart *pp = + container_of(port, struct altera_jtaguart, port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable all interrupts now */ + pp->imr = 0; + writel(pp->imr, port->membase + ALTERA_JTAGUART_CONTROL_REG); + + spin_unlock_irqrestore(&port->lock, flags); + + free_irq(port->irq, port); +} + +static const char *altera_jtaguart_type(struct uart_port *port) +{ + return (port->type == PORT_ALTERA_JTAGUART) ? "Altera JTAG UART" : NULL; +} + +static int altera_jtaguart_request_port(struct uart_port *port) +{ + /* UARTs always present */ + return 0; +} + +static void altera_jtaguart_release_port(struct uart_port *port) +{ + /* Nothing to release... */ +} + +static int altera_jtaguart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (ser->type != PORT_UNKNOWN && ser->type != PORT_ALTERA_JTAGUART) + return -EINVAL; + return 0; +} + +/* + * Define the basic serial functions we support. + */ +static struct uart_ops altera_jtaguart_ops = { + .tx_empty = altera_jtaguart_tx_empty, + .get_mctrl = altera_jtaguart_get_mctrl, + .set_mctrl = altera_jtaguart_set_mctrl, + .start_tx = altera_jtaguart_start_tx, + .stop_tx = altera_jtaguart_stop_tx, + .stop_rx = altera_jtaguart_stop_rx, + .enable_ms = altera_jtaguart_enable_ms, + .break_ctl = altera_jtaguart_break_ctl, + .startup = altera_jtaguart_startup, + .shutdown = altera_jtaguart_shutdown, + .set_termios = altera_jtaguart_set_termios, + .type = altera_jtaguart_type, + .request_port = altera_jtaguart_request_port, + .release_port = altera_jtaguart_release_port, + .config_port = altera_jtaguart_config_port, + .verify_port = altera_jtaguart_verify_port, +}; + +#define ALTERA_JTAGUART_MAXPORTS 1 +static struct altera_jtaguart altera_jtaguart_ports[ALTERA_JTAGUART_MAXPORTS]; + +#if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE) + +int __init early_altera_jtaguart_setup(struct altera_jtaguart_platform_uart + *platp) +{ + struct uart_port *port; + int i; + + for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) { + port = &altera_jtaguart_ports[i].port; + + port->line = i; + port->type = PORT_ALTERA_JTAGUART; + port->mapbase = platp[i].mapbase; + port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); + port->iotype = SERIAL_IO_MEM; + port->irq = platp[i].irq; + port->flags = ASYNC_BOOT_AUTOCONF; + port->ops = &altera_jtaguart_ops; + } + + return 0; +} + +#if defined(CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS) +static void altera_jtaguart_console_putc(struct console *co, const char c) +{ + struct uart_port *port = &(altera_jtaguart_ports + co->index)->port; + unsigned long status; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + while (((status = readl(port->membase + ALTERA_JTAGUART_CONTROL_REG)) & + ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) { + if ((status & ALTERA_JTAGUART_CONTROL_AC_MSK) == 0) { + spin_unlock_irqrestore(&port->lock, flags); + return; /* no connection activity */ + } + spin_unlock_irqrestore(&port->lock, flags); + cpu_relax(); + spin_lock_irqsave(&port->lock, flags); + } + writel(c, port->membase + ALTERA_JTAGUART_DATA_REG); + spin_unlock_irqrestore(&port->lock, flags); +} +#else +static void altera_jtaguart_console_putc(struct console *co, const char c) +{ + struct uart_port *port = &(altera_jtaguart_ports + co->index)->port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + while ((readl(port->membase + ALTERA_JTAGUART_CONTROL_REG) & + ALTERA_JTAGUART_CONTROL_WSPACE_MSK) == 0) { + spin_unlock_irqrestore(&port->lock, flags); + cpu_relax(); + spin_lock_irqsave(&port->lock, flags); + } + writel(c, port->membase + ALTERA_JTAGUART_DATA_REG); + spin_unlock_irqrestore(&port->lock, flags); +} +#endif + +static void altera_jtaguart_console_write(struct console *co, const char *s, + unsigned int count) +{ + for (; count; count--, s++) { + altera_jtaguart_console_putc(co, *s); + if (*s == '\n') + altera_jtaguart_console_putc(co, '\r'); + } +} + +static int __init altera_jtaguart_console_setup(struct console *co, + char *options) +{ + struct uart_port *port; + + if (co->index < 0 || co->index >= ALTERA_JTAGUART_MAXPORTS) + return -EINVAL; + port = &altera_jtaguart_ports[co->index].port; + if (port->membase == 0) + return -ENODEV; + return 0; +} + +static struct uart_driver altera_jtaguart_driver; + +static struct console altera_jtaguart_console = { + .name = "ttyJ", + .write = altera_jtaguart_console_write, + .device = uart_console_device, + .setup = altera_jtaguart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &altera_jtaguart_driver, +}; + +static int __init altera_jtaguart_console_init(void) +{ + register_console(&altera_jtaguart_console); + return 0; +} + +console_initcall(altera_jtaguart_console_init); + +#define ALTERA_JTAGUART_CONSOLE (&altera_jtaguart_console) + +#else + +#define ALTERA_JTAGUART_CONSOLE NULL + +#endif /* CONFIG_ALTERA_JTAGUART_CONSOLE */ + +static struct uart_driver altera_jtaguart_driver = { + .owner = THIS_MODULE, + .driver_name = "altera_jtaguart", + .dev_name = "ttyJ", + .major = ALTERA_JTAGUART_MAJOR, + .minor = ALTERA_JTAGUART_MINOR, + .nr = ALTERA_JTAGUART_MAXPORTS, + .cons = ALTERA_JTAGUART_CONSOLE, +}; + +static int __devinit altera_jtaguart_probe(struct platform_device *pdev) +{ + struct altera_jtaguart_platform_uart *platp = pdev->dev.platform_data; + struct uart_port *port; + int i; + + for (i = 0; i < ALTERA_JTAGUART_MAXPORTS && platp[i].mapbase; i++) { + port = &altera_jtaguart_ports[i].port; + + port->line = i; + port->type = PORT_ALTERA_JTAGUART; + port->mapbase = platp[i].mapbase; + port->membase = ioremap(port->mapbase, ALTERA_JTAGUART_SIZE); + port->iotype = SERIAL_IO_MEM; + port->irq = platp[i].irq; + port->ops = &altera_jtaguart_ops; + port->flags = ASYNC_BOOT_AUTOCONF; + + uart_add_one_port(&altera_jtaguart_driver, port); + } + + return 0; +} + +static int __devexit altera_jtaguart_remove(struct platform_device *pdev) +{ + struct uart_port *port; + int i; + + for (i = 0; i < ALTERA_JTAGUART_MAXPORTS; i++) { + port = &altera_jtaguart_ports[i].port; + if (port) + uart_remove_one_port(&altera_jtaguart_driver, port); + } + + return 0; +} + +static struct platform_driver altera_jtaguart_platform_driver = { + .probe = altera_jtaguart_probe, + .remove = __devexit_p(altera_jtaguart_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init altera_jtaguart_init(void) +{ + int rc; + + rc = uart_register_driver(&altera_jtaguart_driver); + if (rc) + return rc; + rc = platform_driver_register(&altera_jtaguart_platform_driver); + if (rc) { + uart_unregister_driver(&altera_jtaguart_driver); + return rc; + } + return 0; +} + +static void __exit altera_jtaguart_exit(void) +{ + platform_driver_unregister(&altera_jtaguart_platform_driver); + uart_unregister_driver(&altera_jtaguart_driver); +} + +module_init(altera_jtaguart_init); +module_exit(altera_jtaguart_exit); + +MODULE_DESCRIPTION("Altera JTAG UART driver"); +MODULE_AUTHOR("Thomas Chou "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c new file mode 100644 index 000000000000..721216292a50 --- /dev/null +++ b/drivers/tty/serial/altera_uart.c @@ -0,0 +1,608 @@ +/* + * altera_uart.c -- Altera UART driver + * + * Based on mcf.c -- Freescale ColdFire UART driver + * + * (C) Copyright 2003-2007, Greg Ungerer + * (C) Copyright 2008, Thomas Chou + * (C) Copyright 2010, Tobias Klauser + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "altera_uart" +#define SERIAL_ALTERA_MAJOR 204 +#define SERIAL_ALTERA_MINOR 213 + +/* + * Altera UART register definitions according to the Nios UART datasheet: + * http://www.altera.com/literature/ds/ds_nios_uart.pdf + */ + +#define ALTERA_UART_SIZE 32 + +#define ALTERA_UART_RXDATA_REG 0 +#define ALTERA_UART_TXDATA_REG 4 +#define ALTERA_UART_STATUS_REG 8 +#define ALTERA_UART_CONTROL_REG 12 +#define ALTERA_UART_DIVISOR_REG 16 +#define ALTERA_UART_EOP_REG 20 + +#define ALTERA_UART_STATUS_PE_MSK 0x0001 /* parity error */ +#define ALTERA_UART_STATUS_FE_MSK 0x0002 /* framing error */ +#define ALTERA_UART_STATUS_BRK_MSK 0x0004 /* break */ +#define ALTERA_UART_STATUS_ROE_MSK 0x0008 /* RX overrun error */ +#define ALTERA_UART_STATUS_TOE_MSK 0x0010 /* TX overrun error */ +#define ALTERA_UART_STATUS_TMT_MSK 0x0020 /* TX shift register state */ +#define ALTERA_UART_STATUS_TRDY_MSK 0x0040 /* TX ready */ +#define ALTERA_UART_STATUS_RRDY_MSK 0x0080 /* RX ready */ +#define ALTERA_UART_STATUS_E_MSK 0x0100 /* exception condition */ +#define ALTERA_UART_STATUS_DCTS_MSK 0x0400 /* CTS logic-level change */ +#define ALTERA_UART_STATUS_CTS_MSK 0x0800 /* CTS logic state */ +#define ALTERA_UART_STATUS_EOP_MSK 0x1000 /* EOP written/read */ + + /* Enable interrupt on... */ +#define ALTERA_UART_CONTROL_PE_MSK 0x0001 /* ...parity error */ +#define ALTERA_UART_CONTROL_FE_MSK 0x0002 /* ...framing error */ +#define ALTERA_UART_CONTROL_BRK_MSK 0x0004 /* ...break */ +#define ALTERA_UART_CONTROL_ROE_MSK 0x0008 /* ...RX overrun */ +#define ALTERA_UART_CONTROL_TOE_MSK 0x0010 /* ...TX overrun */ +#define ALTERA_UART_CONTROL_TMT_MSK 0x0020 /* ...TX shift register empty */ +#define ALTERA_UART_CONTROL_TRDY_MSK 0x0040 /* ...TX ready */ +#define ALTERA_UART_CONTROL_RRDY_MSK 0x0080 /* ...RX ready */ +#define ALTERA_UART_CONTROL_E_MSK 0x0100 /* ...exception*/ + +#define ALTERA_UART_CONTROL_TRBK_MSK 0x0200 /* TX break */ +#define ALTERA_UART_CONTROL_DCTS_MSK 0x0400 /* Interrupt on CTS change */ +#define ALTERA_UART_CONTROL_RTS_MSK 0x0800 /* RTS signal */ +#define ALTERA_UART_CONTROL_EOP_MSK 0x1000 /* Interrupt on EOP */ + +/* + * Local per-uart structure. + */ +struct altera_uart { + struct uart_port port; + struct timer_list tmr; + unsigned int sigs; /* Local copy of line sigs */ + unsigned short imr; /* Local IMR mirror */ +}; + +static u32 altera_uart_readl(struct uart_port *port, int reg) +{ + struct altera_uart_platform_uart *platp = port->private_data; + + return readl(port->membase + (reg << platp->bus_shift)); +} + +static void altera_uart_writel(struct uart_port *port, u32 dat, int reg) +{ + struct altera_uart_platform_uart *platp = port->private_data; + + writel(dat, port->membase + (reg << platp->bus_shift)); +} + +static unsigned int altera_uart_tx_empty(struct uart_port *port) +{ + return (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & + ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0; +} + +static unsigned int altera_uart_get_mctrl(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + unsigned int sigs; + + sigs = (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & + ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0; + sigs |= (pp->sigs & TIOCM_RTS); + + return sigs; +} + +static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + + pp->sigs = sigs; + if (sigs & TIOCM_RTS) + pp->imr |= ALTERA_UART_CONTROL_RTS_MSK; + else + pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK; + altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); +} + +static void altera_uart_start_tx(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + + pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK; + altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); +} + +static void altera_uart_stop_tx(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + + pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK; + altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); +} + +static void altera_uart_stop_rx(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + + pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK; + altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); +} + +static void altera_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (break_state == -1) + pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK; + else + pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK; + altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void altera_uart_enable_ms(struct uart_port *port) +{ +} + +static void altera_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, baudclk; + + baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + baudclk = port->uartclk / baud; + + if (old) + tty_termios_copy_hw(termios, old); + tty_termios_encode_baud_rate(termios, baud, baud); + + spin_lock_irqsave(&port->lock, flags); + uart_update_timeout(port, termios->c_cflag, baud); + altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void altera_uart_rx_chars(struct altera_uart *pp) +{ + struct uart_port *port = &pp->port; + unsigned char ch, flag; + unsigned short status; + + while ((status = altera_uart_readl(port, ALTERA_UART_STATUS_REG)) & + ALTERA_UART_STATUS_RRDY_MSK) { + ch = altera_uart_readl(port, ALTERA_UART_RXDATA_REG); + flag = TTY_NORMAL; + port->icount.rx++; + + if (status & ALTERA_UART_STATUS_E_MSK) { + altera_uart_writel(port, status, + ALTERA_UART_STATUS_REG); + + if (status & ALTERA_UART_STATUS_BRK_MSK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (status & ALTERA_UART_STATUS_PE_MSK) { + port->icount.parity++; + } else if (status & ALTERA_UART_STATUS_ROE_MSK) { + port->icount.overrun++; + } else if (status & ALTERA_UART_STATUS_FE_MSK) { + port->icount.frame++; + } + + status &= port->read_status_mask; + + if (status & ALTERA_UART_STATUS_BRK_MSK) + flag = TTY_BREAK; + else if (status & ALTERA_UART_STATUS_PE_MSK) + flag = TTY_PARITY; + else if (status & ALTERA_UART_STATUS_FE_MSK) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + continue; + uart_insert_char(port, status, ALTERA_UART_STATUS_ROE_MSK, ch, + flag); + } + + tty_flip_buffer_push(port->state->port.tty); +} + +static void altera_uart_tx_chars(struct altera_uart *pp) +{ + struct uart_port *port = &pp->port; + struct circ_buf *xmit = &port->state->xmit; + + if (port->x_char) { + /* Send special char - probably flow control */ + altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG); + port->x_char = 0; + port->icount.tx++; + return; + } + + while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & + ALTERA_UART_STATUS_TRDY_MSK) { + if (xmit->head == xmit->tail) + break; + altera_uart_writel(port, xmit->buf[xmit->tail], + ALTERA_UART_TXDATA_REG); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (xmit->head == xmit->tail) { + pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK; + altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); + } +} + +static irqreturn_t altera_uart_interrupt(int irq, void *data) +{ + struct uart_port *port = data; + struct altera_uart *pp = container_of(port, struct altera_uart, port); + unsigned int isr; + + isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr; + + spin_lock(&port->lock); + if (isr & ALTERA_UART_STATUS_RRDY_MSK) + altera_uart_rx_chars(pp); + if (isr & ALTERA_UART_STATUS_TRDY_MSK) + altera_uart_tx_chars(pp); + spin_unlock(&port->lock); + + return IRQ_RETVAL(isr); +} + +static void altera_uart_timer(unsigned long data) +{ + struct uart_port *port = (void *)data; + struct altera_uart *pp = container_of(port, struct altera_uart, port); + + altera_uart_interrupt(0, port); + mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port)); +} + +static void altera_uart_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_ALTERA_UART; + + /* Clear mask, so no surprise interrupts. */ + altera_uart_writel(port, 0, ALTERA_UART_CONTROL_REG); + /* Clear status register */ + altera_uart_writel(port, 0, ALTERA_UART_STATUS_REG); +} + +static int altera_uart_startup(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + unsigned long flags; + int ret; + + if (!port->irq) { + setup_timer(&pp->tmr, altera_uart_timer, (unsigned long)port); + mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port)); + return 0; + } + + ret = request_irq(port->irq, altera_uart_interrupt, IRQF_DISABLED, + DRV_NAME, port); + if (ret) { + pr_err(DRV_NAME ": unable to attach Altera UART %d " + "interrupt vector=%d\n", port->line, port->irq); + return ret; + } + + spin_lock_irqsave(&port->lock, flags); + + /* Enable RX interrupts now */ + pp->imr = ALTERA_UART_CONTROL_RRDY_MSK; + writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +static void altera_uart_shutdown(struct uart_port *port) +{ + struct altera_uart *pp = container_of(port, struct altera_uart, port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable all interrupts now */ + pp->imr = 0; + writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG); + + spin_unlock_irqrestore(&port->lock, flags); + + if (port->irq) + free_irq(port->irq, port); + else + del_timer_sync(&pp->tmr); +} + +static const char *altera_uart_type(struct uart_port *port) +{ + return (port->type == PORT_ALTERA_UART) ? "Altera UART" : NULL; +} + +static int altera_uart_request_port(struct uart_port *port) +{ + /* UARTs always present */ + return 0; +} + +static void altera_uart_release_port(struct uart_port *port) +{ + /* Nothing to release... */ +} + +static int altera_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_ALTERA_UART)) + return -EINVAL; + return 0; +} + +/* + * Define the basic serial functions we support. + */ +static struct uart_ops altera_uart_ops = { + .tx_empty = altera_uart_tx_empty, + .get_mctrl = altera_uart_get_mctrl, + .set_mctrl = altera_uart_set_mctrl, + .start_tx = altera_uart_start_tx, + .stop_tx = altera_uart_stop_tx, + .stop_rx = altera_uart_stop_rx, + .enable_ms = altera_uart_enable_ms, + .break_ctl = altera_uart_break_ctl, + .startup = altera_uart_startup, + .shutdown = altera_uart_shutdown, + .set_termios = altera_uart_set_termios, + .type = altera_uart_type, + .request_port = altera_uart_request_port, + .release_port = altera_uart_release_port, + .config_port = altera_uart_config_port, + .verify_port = altera_uart_verify_port, +}; + +static struct altera_uart altera_uart_ports[CONFIG_SERIAL_ALTERA_UART_MAXPORTS]; + +#if defined(CONFIG_SERIAL_ALTERA_UART_CONSOLE) + +int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp) +{ + struct uart_port *port; + int i; + + for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS && platp[i].mapbase; i++) { + port = &altera_uart_ports[i].port; + + port->line = i; + port->type = PORT_ALTERA_UART; + port->mapbase = platp[i].mapbase; + port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE); + port->iotype = SERIAL_IO_MEM; + port->irq = platp[i].irq; + port->uartclk = platp[i].uartclk; + port->flags = UPF_BOOT_AUTOCONF; + port->ops = &altera_uart_ops; + port->private_data = platp; + } + + return 0; +} + +static void altera_uart_console_putc(struct uart_port *port, const char c) +{ + while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) & + ALTERA_UART_STATUS_TRDY_MSK)) + cpu_relax(); + + writel(c, port->membase + ALTERA_UART_TXDATA_REG); +} + +static void altera_uart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = &(altera_uart_ports + co->index)->port; + + for (; count; count--, s++) { + altera_uart_console_putc(port, *s); + if (*s == '\n') + altera_uart_console_putc(port, '\r'); + } +} + +static int __init altera_uart_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = CONFIG_SERIAL_ALTERA_UART_BAUDRATE; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS) + return -EINVAL; + port = &altera_uart_ports[co->index].port; + if (!port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver altera_uart_driver; + +static struct console altera_uart_console = { + .name = "ttyAL", + .write = altera_uart_console_write, + .device = uart_console_device, + .setup = altera_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &altera_uart_driver, +}; + +static int __init altera_uart_console_init(void) +{ + register_console(&altera_uart_console); + return 0; +} + +console_initcall(altera_uart_console_init); + +#define ALTERA_UART_CONSOLE (&altera_uart_console) + +#else + +#define ALTERA_UART_CONSOLE NULL + +#endif /* CONFIG_ALTERA_UART_CONSOLE */ + +/* + * Define the altera_uart UART driver structure. + */ +static struct uart_driver altera_uart_driver = { + .owner = THIS_MODULE, + .driver_name = DRV_NAME, + .dev_name = "ttyAL", + .major = SERIAL_ALTERA_MAJOR, + .minor = SERIAL_ALTERA_MINOR, + .nr = CONFIG_SERIAL_ALTERA_UART_MAXPORTS, + .cons = ALTERA_UART_CONSOLE, +}; + +static int __devinit altera_uart_probe(struct platform_device *pdev) +{ + struct altera_uart_platform_uart *platp = pdev->dev.platform_data; + struct uart_port *port; + struct resource *res_mem; + struct resource *res_irq; + int i = pdev->id; + + /* -1 emphasizes that the platform must have one port, no .N suffix */ + if (i == -1) + i = 0; + + if (i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS) + return -EINVAL; + + port = &altera_uart_ports[i].port; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res_mem) + port->mapbase = res_mem->start; + else if (platp->mapbase) + port->mapbase = platp->mapbase; + else + return -EINVAL; + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res_irq) + port->irq = res_irq->start; + else if (platp->irq) + port->irq = platp->irq; + + port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE); + if (!port->membase) + return -ENOMEM; + + port->line = i; + port->type = PORT_ALTERA_UART; + port->iotype = SERIAL_IO_MEM; + port->uartclk = platp->uartclk; + port->ops = &altera_uart_ops; + port->flags = UPF_BOOT_AUTOCONF; + port->private_data = platp; + + uart_add_one_port(&altera_uart_driver, port); + + return 0; +} + +static int __devexit altera_uart_remove(struct platform_device *pdev) +{ + struct uart_port *port = &altera_uart_ports[pdev->id].port; + + uart_remove_one_port(&altera_uart_driver, port); + return 0; +} + +static struct platform_driver altera_uart_platform_driver = { + .probe = altera_uart_probe, + .remove = __devexit_p(altera_uart_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .pm = NULL, + }, +}; + +static int __init altera_uart_init(void) +{ + int rc; + + rc = uart_register_driver(&altera_uart_driver); + if (rc) + return rc; + rc = platform_driver_register(&altera_uart_platform_driver); + if (rc) { + uart_unregister_driver(&altera_uart_driver); + return rc; + } + return 0; +} + +static void __exit altera_uart_exit(void) +{ + platform_driver_unregister(&altera_uart_platform_driver); + uart_unregister_driver(&altera_uart_driver); +} + +module_init(altera_uart_init); +module_exit(altera_uart_exit); + +MODULE_DESCRIPTION("Altera UART driver"); +MODULE_AUTHOR("Thomas Chou "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); +MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_ALTERA_MAJOR); diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c new file mode 100644 index 000000000000..2904aa044126 --- /dev/null +++ b/drivers/tty/serial/amba-pl010.c @@ -0,0 +1,825 @@ +/* + * linux/drivers/char/amba.c + * + * Driver for AMBA serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This is a generic driver for ARM AMBA-type serial ports. They + * have a lot of 16550-like features, but are not register compatible. + * Note that although they do have CTS, DCD and DSR inputs, they do + * not have an RI input, nor do they have DTR or RTS outputs. If + * required, these have to be supplied via some other means (eg, GPIO) + * and hooked into this driver. + */ + +#if defined(CONFIG_SERIAL_AMBA_PL010_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define UART_NR 8 + +#define SERIAL_AMBA_MAJOR 204 +#define SERIAL_AMBA_MINOR 16 +#define SERIAL_AMBA_NR UART_NR + +#define AMBA_ISR_PASS_LIMIT 256 + +#define UART_RX_DATA(s) (((s) & UART01x_FR_RXFE) == 0) +#define UART_TX_READY(s) (((s) & UART01x_FR_TXFF) == 0) + +#define UART_DUMMY_RSR_RX 256 +#define UART_PORT_SIZE 64 + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_amba_port { + struct uart_port port; + struct clk *clk; + struct amba_device *dev; + struct amba_pl010_data *data; + unsigned int old_status; +}; + +static void pl010_stop_tx(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + + cr = readb(uap->port.membase + UART010_CR); + cr &= ~UART010_CR_TIE; + writel(cr, uap->port.membase + UART010_CR); +} + +static void pl010_start_tx(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + + cr = readb(uap->port.membase + UART010_CR); + cr |= UART010_CR_TIE; + writel(cr, uap->port.membase + UART010_CR); +} + +static void pl010_stop_rx(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + + cr = readb(uap->port.membase + UART010_CR); + cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); + writel(cr, uap->port.membase + UART010_CR); +} + +static void pl010_enable_ms(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + + cr = readb(uap->port.membase + UART010_CR); + cr |= UART010_CR_MSIE; + writel(cr, uap->port.membase + UART010_CR); +} + +static void pl010_rx_chars(struct uart_amba_port *uap) +{ + struct tty_struct *tty = uap->port.state->port.tty; + unsigned int status, ch, flag, rsr, max_count = 256; + + status = readb(uap->port.membase + UART01x_FR); + while (UART_RX_DATA(status) && max_count--) { + ch = readb(uap->port.membase + UART01x_DR); + flag = TTY_NORMAL; + + uap->port.icount.rx++; + + /* + * Note that the error handling code is + * out of the main execution path + */ + rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; + if (unlikely(rsr & UART01x_RSR_ANY)) { + writel(0, uap->port.membase + UART01x_ECR); + + if (rsr & UART01x_RSR_BE) { + rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); + uap->port.icount.brk++; + if (uart_handle_break(&uap->port)) + goto ignore_char; + } else if (rsr & UART01x_RSR_PE) + uap->port.icount.parity++; + else if (rsr & UART01x_RSR_FE) + uap->port.icount.frame++; + if (rsr & UART01x_RSR_OE) + uap->port.icount.overrun++; + + rsr &= uap->port.read_status_mask; + + if (rsr & UART01x_RSR_BE) + flag = TTY_BREAK; + else if (rsr & UART01x_RSR_PE) + flag = TTY_PARITY; + else if (rsr & UART01x_RSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&uap->port, ch)) + goto ignore_char; + + uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); + + ignore_char: + status = readb(uap->port.membase + UART01x_FR); + } + spin_unlock(&uap->port.lock); + tty_flip_buffer_push(tty); + spin_lock(&uap->port.lock); +} + +static void pl010_tx_chars(struct uart_amba_port *uap) +{ + struct circ_buf *xmit = &uap->port.state->xmit; + int count; + + if (uap->port.x_char) { + writel(uap->port.x_char, uap->port.membase + UART01x_DR); + uap->port.icount.tx++; + uap->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) { + pl010_stop_tx(&uap->port); + return; + } + + count = uap->port.fifosize >> 1; + do { + writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + + if (uart_circ_empty(xmit)) + pl010_stop_tx(&uap->port); +} + +static void pl010_modem_status(struct uart_amba_port *uap) +{ + unsigned int status, delta; + + writel(0, uap->port.membase + UART010_ICR); + + status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + delta = status ^ uap->old_status; + uap->old_status = status; + + if (!delta) + return; + + if (delta & UART01x_FR_DCD) + uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); + + if (delta & UART01x_FR_DSR) + uap->port.icount.dsr++; + + if (delta & UART01x_FR_CTS) + uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); + + wake_up_interruptible(&uap->port.state->port.delta_msr_wait); +} + +static irqreturn_t pl010_int(int irq, void *dev_id) +{ + struct uart_amba_port *uap = dev_id; + unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT; + int handled = 0; + + spin_lock(&uap->port.lock); + + status = readb(uap->port.membase + UART010_IIR); + if (status) { + do { + if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) + pl010_rx_chars(uap); + if (status & UART010_IIR_MIS) + pl010_modem_status(uap); + if (status & UART010_IIR_TIS) + pl010_tx_chars(uap); + + if (pass_counter-- == 0) + break; + + status = readb(uap->port.membase + UART010_IIR); + } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | + UART010_IIR_TIS)); + handled = 1; + } + + spin_unlock(&uap->port.lock); + + return IRQ_RETVAL(handled); +} + +static unsigned int pl010_tx_empty(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int status = readb(uap->port.membase + UART01x_FR); + return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; +} + +static unsigned int pl010_get_mctrl(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int result = 0; + unsigned int status; + + status = readb(uap->port.membase + UART01x_FR); + if (status & UART01x_FR_DCD) + result |= TIOCM_CAR; + if (status & UART01x_FR_DSR) + result |= TIOCM_DSR; + if (status & UART01x_FR_CTS) + result |= TIOCM_CTS; + + return result; +} + +static void pl010_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + if (uap->data) + uap->data->set_mctrl(uap->dev, uap->port.membase, mctrl); +} + +static void pl010_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned long flags; + unsigned int lcr_h; + + spin_lock_irqsave(&uap->port.lock, flags); + lcr_h = readb(uap->port.membase + UART010_LCRH); + if (break_state == -1) + lcr_h |= UART01x_LCRH_BRK; + else + lcr_h &= ~UART01x_LCRH_BRK; + writel(lcr_h, uap->port.membase + UART010_LCRH); + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +static int pl010_startup(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + int retval; + + /* + * Try to enable the clock producer. + */ + retval = clk_enable(uap->clk); + if (retval) + goto out; + + uap->port.uartclk = clk_get_rate(uap->clk); + + /* + * Allocate the IRQ + */ + retval = request_irq(uap->port.irq, pl010_int, 0, "uart-pl010", uap); + if (retval) + goto clk_dis; + + /* + * initialise the old status of the modem signals + */ + uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + /* + * Finally, enable interrupts + */ + writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, + uap->port.membase + UART010_CR); + + return 0; + + clk_dis: + clk_disable(uap->clk); + out: + return retval; +} + +static void pl010_shutdown(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + /* + * Free the interrupt + */ + free_irq(uap->port.irq, uap); + + /* + * disable all interrupts, disable the port + */ + writel(0, uap->port.membase + UART010_CR); + + /* disable break condition and fifos */ + writel(readb(uap->port.membase + UART010_LCRH) & + ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), + uap->port.membase + UART010_LCRH); + + /* + * Shut down the clock producer + */ + clk_disable(uap->clk); +} + +static void +pl010_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int lcr_h, old_cr; + unsigned long flags; + unsigned int baud, quot; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); + quot = uart_get_divisor(port, baud); + + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr_h = UART01x_LCRH_WLEN_5; + break; + case CS6: + lcr_h = UART01x_LCRH_WLEN_6; + break; + case CS7: + lcr_h = UART01x_LCRH_WLEN_7; + break; + default: // CS8 + lcr_h = UART01x_LCRH_WLEN_8; + break; + } + if (termios->c_cflag & CSTOPB) + lcr_h |= UART01x_LCRH_STP2; + if (termios->c_cflag & PARENB) { + lcr_h |= UART01x_LCRH_PEN; + if (!(termios->c_cflag & PARODD)) + lcr_h |= UART01x_LCRH_EPS; + } + if (uap->port.fifosize > 1) + lcr_h |= UART01x_LCRH_FEN; + + spin_lock_irqsave(&uap->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + uap->port.read_status_mask = UART01x_RSR_OE; + if (termios->c_iflag & INPCK) + uap->port.read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + uap->port.read_status_mask |= UART01x_RSR_BE; + + /* + * Characters to ignore + */ + uap->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + uap->port.ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + if (termios->c_iflag & IGNBRK) { + uap->port.ignore_status_mask |= UART01x_RSR_BE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + uap->port.ignore_status_mask |= UART01x_RSR_OE; + } + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; + + /* first, disable everything */ + old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; + + if (UART_ENABLE_MS(port, termios->c_cflag)) + old_cr |= UART010_CR_MSIE; + + writel(0, uap->port.membase + UART010_CR); + + /* Set baud rate */ + quot -= 1; + writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); + writel(quot & 0xff, uap->port.membase + UART010_LCRL); + + /* + * ----------v----------v----------v----------v----- + * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L + * ----------^----------^----------^----------^----- + */ + writel(lcr_h, uap->port.membase + UART010_LCRH); + writel(old_cr, uap->port.membase + UART010_CR); + + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +static void pl010_set_ldisc(struct uart_port *port, int new) +{ + if (new == N_PPS) { + port->flags |= UPF_HARDPPS_CD; + pl010_enable_ms(port); + } else + port->flags &= ~UPF_HARDPPS_CD; +} + +static const char *pl010_type(struct uart_port *port) +{ + return port->type == PORT_AMBA ? "AMBA" : NULL; +} + +/* + * Release the memory region(s) being used by 'port' + */ +static void pl010_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, UART_PORT_SIZE); +} + +/* + * Request the memory region(s) being used by 'port' + */ +static int pl010_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, UART_PORT_SIZE, "uart-pl010") + != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void pl010_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_AMBA; + pl010_request_port(port); + } +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= nr_irqs) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static struct uart_ops amba_pl010_pops = { + .tx_empty = pl010_tx_empty, + .set_mctrl = pl010_set_mctrl, + .get_mctrl = pl010_get_mctrl, + .stop_tx = pl010_stop_tx, + .start_tx = pl010_start_tx, + .stop_rx = pl010_stop_rx, + .enable_ms = pl010_enable_ms, + .break_ctl = pl010_break_ctl, + .startup = pl010_startup, + .shutdown = pl010_shutdown, + .set_termios = pl010_set_termios, + .set_ldisc = pl010_set_ldisc, + .type = pl010_type, + .release_port = pl010_release_port, + .request_port = pl010_request_port, + .config_port = pl010_config_port, + .verify_port = pl010_verify_port, +}; + +static struct uart_amba_port *amba_ports[UART_NR]; + +#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE + +static void pl010_console_putchar(struct uart_port *port, int ch) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int status; + + do { + status = readb(uap->port.membase + UART01x_FR); + barrier(); + } while (!UART_TX_READY(status)); + writel(ch, uap->port.membase + UART01x_DR); +} + +static void +pl010_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_amba_port *uap = amba_ports[co->index]; + unsigned int status, old_cr; + + clk_enable(uap->clk); + + /* + * First save the CR then disable the interrupts + */ + old_cr = readb(uap->port.membase + UART010_CR); + writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); + + uart_console_write(&uap->port, s, count, pl010_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the TCR + */ + do { + status = readb(uap->port.membase + UART01x_FR); + barrier(); + } while (status & UART01x_FR_BUSY); + writel(old_cr, uap->port.membase + UART010_CR); + + clk_disable(uap->clk); +} + +static void __init +pl010_console_get_options(struct uart_amba_port *uap, int *baud, + int *parity, int *bits) +{ + if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { + unsigned int lcr_h, quot; + lcr_h = readb(uap->port.membase + UART010_LCRH); + + *parity = 'n'; + if (lcr_h & UART01x_LCRH_PEN) { + if (lcr_h & UART01x_LCRH_EPS) + *parity = 'e'; + else + *parity = 'o'; + } + + if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) + *bits = 7; + else + *bits = 8; + + quot = readb(uap->port.membase + UART010_LCRL) | + readb(uap->port.membase + UART010_LCRM) << 8; + *baud = uap->port.uartclk / (16 * (quot + 1)); + } +} + +static int __init pl010_console_setup(struct console *co, char *options) +{ + struct uart_amba_port *uap; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + uap = amba_ports[co->index]; + if (!uap) + return -ENODEV; + + uap->port.uartclk = clk_get_rate(uap->clk); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + pl010_console_get_options(uap, &baud, &parity, &bits); + + return uart_set_options(&uap->port, co, baud, parity, bits, flow); +} + +static struct uart_driver amba_reg; +static struct console amba_console = { + .name = "ttyAM", + .write = pl010_console_write, + .device = uart_console_device, + .setup = pl010_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &amba_reg, +}; + +#define AMBA_CONSOLE &amba_console +#else +#define AMBA_CONSOLE NULL +#endif + +static struct uart_driver amba_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyAM", + .dev_name = "ttyAM", + .major = SERIAL_AMBA_MAJOR, + .minor = SERIAL_AMBA_MINOR, + .nr = UART_NR, + .cons = AMBA_CONSOLE, +}; + +static int pl010_probe(struct amba_device *dev, struct amba_id *id) +{ + struct uart_amba_port *uap; + void __iomem *base; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == NULL) + break; + + if (i == ARRAY_SIZE(amba_ports)) { + ret = -EBUSY; + goto out; + } + + uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL); + if (!uap) { + ret = -ENOMEM; + goto out; + } + + base = ioremap(dev->res.start, resource_size(&dev->res)); + if (!base) { + ret = -ENOMEM; + goto free; + } + + uap->clk = clk_get(&dev->dev, NULL); + if (IS_ERR(uap->clk)) { + ret = PTR_ERR(uap->clk); + goto unmap; + } + + uap->port.dev = &dev->dev; + uap->port.mapbase = dev->res.start; + uap->port.membase = base; + uap->port.iotype = UPIO_MEM; + uap->port.irq = dev->irq[0]; + uap->port.fifosize = 16; + uap->port.ops = &amba_pl010_pops; + uap->port.flags = UPF_BOOT_AUTOCONF; + uap->port.line = i; + uap->dev = dev; + uap->data = dev->dev.platform_data; + + amba_ports[i] = uap; + + amba_set_drvdata(dev, uap); + ret = uart_add_one_port(&amba_reg, &uap->port); + if (ret) { + amba_set_drvdata(dev, NULL); + amba_ports[i] = NULL; + clk_put(uap->clk); + unmap: + iounmap(base); + free: + kfree(uap); + } + out: + return ret; +} + +static int pl010_remove(struct amba_device *dev) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + int i; + + amba_set_drvdata(dev, NULL); + + uart_remove_one_port(&amba_reg, &uap->port); + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == uap) + amba_ports[i] = NULL; + + iounmap(uap->port.membase); + clk_put(uap->clk); + kfree(uap); + return 0; +} + +static int pl010_suspend(struct amba_device *dev, pm_message_t state) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + + if (uap) + uart_suspend_port(&amba_reg, &uap->port); + + return 0; +} + +static int pl010_resume(struct amba_device *dev) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + + if (uap) + uart_resume_port(&amba_reg, &uap->port); + + return 0; +} + +static struct amba_id pl010_ids[] = { + { + .id = 0x00041010, + .mask = 0x000fffff, + }, + { 0, 0 }, +}; + +static struct amba_driver pl010_driver = { + .drv = { + .name = "uart-pl010", + }, + .id_table = pl010_ids, + .probe = pl010_probe, + .remove = pl010_remove, + .suspend = pl010_suspend, + .resume = pl010_resume, +}; + +static int __init pl010_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: AMBA driver\n"); + + ret = uart_register_driver(&amba_reg); + if (ret == 0) { + ret = amba_driver_register(&pl010_driver); + if (ret) + uart_unregister_driver(&amba_reg); + } + return ret; +} + +static void __exit pl010_exit(void) +{ + amba_driver_unregister(&pl010_driver); + uart_unregister_driver(&amba_reg); +} + +module_init(pl010_init); +module_exit(pl010_exit); + +MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("ARM AMBA serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c new file mode 100644 index 000000000000..e76d7d000128 --- /dev/null +++ b/drivers/tty/serial/amba-pl011.c @@ -0,0 +1,1519 @@ +/* + * linux/drivers/char/amba.c + * + * Driver for AMBA serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * Copyright (C) 2010 ST-Ericsson SA + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This is a generic driver for ARM AMBA-type serial ports. They + * have a lot of 16550-like features, but are not register compatible. + * Note that although they do have CTS, DCD and DSR inputs, they do + * not have an RI input, nor do they have DTR or RTS outputs. If + * required, these have to be supplied via some other means (eg, GPIO) + * and hooked into this driver. + */ + +#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define UART_NR 14 + +#define SERIAL_AMBA_MAJOR 204 +#define SERIAL_AMBA_MINOR 64 +#define SERIAL_AMBA_NR UART_NR + +#define AMBA_ISR_PASS_LIMIT 256 + +#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) +#define UART_DUMMY_DR_RX (1 << 16) + +/* There is by now at least one vendor with differing details, so handle it */ +struct vendor_data { + unsigned int ifls; + unsigned int fifosize; + unsigned int lcrh_tx; + unsigned int lcrh_rx; + bool oversampling; + bool dma_threshold; +}; + +static struct vendor_data vendor_arm = { + .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, + .fifosize = 16, + .lcrh_tx = UART011_LCRH, + .lcrh_rx = UART011_LCRH, + .oversampling = false, + .dma_threshold = false, +}; + +static struct vendor_data vendor_st = { + .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, + .fifosize = 64, + .lcrh_tx = ST_UART011_LCRH_TX, + .lcrh_rx = ST_UART011_LCRH_RX, + .oversampling = true, + .dma_threshold = true, +}; + +/* Deals with DMA transactions */ +struct pl011_dmatx_data { + struct dma_chan *chan; + struct scatterlist sg; + char *buf; + bool queued; +}; + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_amba_port { + struct uart_port port; + struct clk *clk; + const struct vendor_data *vendor; + unsigned int dmacr; /* dma control reg */ + unsigned int im; /* interrupt mask */ + unsigned int old_status; + unsigned int fifosize; /* vendor-specific */ + unsigned int lcrh_tx; /* vendor-specific */ + unsigned int lcrh_rx; /* vendor-specific */ + bool autorts; + char type[12]; +#ifdef CONFIG_DMA_ENGINE + /* DMA stuff */ + bool using_dma; + struct pl011_dmatx_data dmatx; +#endif +}; + +/* + * All the DMA operation mode stuff goes inside this ifdef. + * This assumes that you have a generic DMA device interface, + * no custom DMA interfaces are supported. + */ +#ifdef CONFIG_DMA_ENGINE + +#define PL011_DMA_BUFFER_SIZE PAGE_SIZE + +static void pl011_dma_probe_initcall(struct uart_amba_port *uap) +{ + /* DMA is the sole user of the platform data right now */ + struct amba_pl011_data *plat = uap->port.dev->platform_data; + struct dma_slave_config tx_conf = { + .dst_addr = uap->port.mapbase + UART01x_DR, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .direction = DMA_TO_DEVICE, + .dst_maxburst = uap->fifosize >> 1, + }; + struct dma_chan *chan; + dma_cap_mask_t mask; + + /* We need platform data */ + if (!plat || !plat->dma_filter) { + dev_info(uap->port.dev, "no DMA platform data\n"); + return; + } + + /* Try to acquire a generic DMA engine slave channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + chan = dma_request_channel(mask, plat->dma_filter, plat->dma_tx_param); + if (!chan) { + dev_err(uap->port.dev, "no TX DMA channel!\n"); + return; + } + + dmaengine_slave_config(chan, &tx_conf); + uap->dmatx.chan = chan; + + dev_info(uap->port.dev, "DMA channel TX %s\n", + dma_chan_name(uap->dmatx.chan)); +} + +#ifndef MODULE +/* + * Stack up the UARTs and let the above initcall be done at device + * initcall time, because the serial driver is called as an arch + * initcall, and at this time the DMA subsystem is not yet registered. + * At this point the driver will switch over to using DMA where desired. + */ +struct dma_uap { + struct list_head node; + struct uart_amba_port *uap; +}; + +static LIST_HEAD(pl011_dma_uarts); + +static int __init pl011_dma_initcall(void) +{ + struct list_head *node, *tmp; + + list_for_each_safe(node, tmp, &pl011_dma_uarts) { + struct dma_uap *dmau = list_entry(node, struct dma_uap, node); + pl011_dma_probe_initcall(dmau->uap); + list_del(node); + kfree(dmau); + } + return 0; +} + +device_initcall(pl011_dma_initcall); + +static void pl011_dma_probe(struct uart_amba_port *uap) +{ + struct dma_uap *dmau = kzalloc(sizeof(struct dma_uap), GFP_KERNEL); + if (dmau) { + dmau->uap = uap; + list_add_tail(&dmau->node, &pl011_dma_uarts); + } +} +#else +static void pl011_dma_probe(struct uart_amba_port *uap) +{ + pl011_dma_probe_initcall(uap); +} +#endif + +static void pl011_dma_remove(struct uart_amba_port *uap) +{ + /* TODO: remove the initcall if it has not yet executed */ + if (uap->dmatx.chan) + dma_release_channel(uap->dmatx.chan); +} + + +/* Forward declare this for the refill routine */ +static int pl011_dma_tx_refill(struct uart_amba_port *uap); + +/* + * The current DMA TX buffer has been sent. + * Try to queue up another DMA buffer. + */ +static void pl011_dma_tx_callback(void *data) +{ + struct uart_amba_port *uap = data; + struct pl011_dmatx_data *dmatx = &uap->dmatx; + unsigned long flags; + u16 dmacr; + + spin_lock_irqsave(&uap->port.lock, flags); + if (uap->dmatx.queued) + dma_unmap_sg(dmatx->chan->device->dev, &dmatx->sg, 1, + DMA_TO_DEVICE); + + dmacr = uap->dmacr; + uap->dmacr = dmacr & ~UART011_TXDMAE; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + + /* + * If TX DMA was disabled, it means that we've stopped the DMA for + * some reason (eg, XOFF received, or we want to send an X-char.) + * + * Note: we need to be careful here of a potential race between DMA + * and the rest of the driver - if the driver disables TX DMA while + * a TX buffer completing, we must update the tx queued status to + * get further refills (hence we check dmacr). + */ + if (!(dmacr & UART011_TXDMAE) || uart_tx_stopped(&uap->port) || + uart_circ_empty(&uap->port.state->xmit)) { + uap->dmatx.queued = false; + spin_unlock_irqrestore(&uap->port.lock, flags); + return; + } + + if (pl011_dma_tx_refill(uap) <= 0) { + /* + * We didn't queue a DMA buffer for some reason, but we + * have data pending to be sent. Re-enable the TX IRQ. + */ + uap->im |= UART011_TXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + } + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +/* + * Try to refill the TX DMA buffer. + * Locking: called with port lock held and IRQs disabled. + * Returns: + * 1 if we queued up a TX DMA buffer. + * 0 if we didn't want to handle this by DMA + * <0 on error + */ +static int pl011_dma_tx_refill(struct uart_amba_port *uap) +{ + struct pl011_dmatx_data *dmatx = &uap->dmatx; + struct dma_chan *chan = dmatx->chan; + struct dma_device *dma_dev = chan->device; + struct dma_async_tx_descriptor *desc; + struct circ_buf *xmit = &uap->port.state->xmit; + unsigned int count; + + /* + * Try to avoid the overhead involved in using DMA if the + * transaction fits in the first half of the FIFO, by using + * the standard interrupt handling. This ensures that we + * issue a uart_write_wakeup() at the appropriate time. + */ + count = uart_circ_chars_pending(xmit); + if (count < (uap->fifosize >> 1)) { + uap->dmatx.queued = false; + return 0; + } + + /* + * Bodge: don't send the last character by DMA, as this + * will prevent XON from notifying us to restart DMA. + */ + count -= 1; + + /* Else proceed to copy the TX chars to the DMA buffer and fire DMA */ + if (count > PL011_DMA_BUFFER_SIZE) + count = PL011_DMA_BUFFER_SIZE; + + if (xmit->tail < xmit->head) + memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], count); + else { + size_t first = UART_XMIT_SIZE - xmit->tail; + size_t second = xmit->head; + + memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], first); + if (second) + memcpy(&dmatx->buf[first], &xmit->buf[0], second); + } + + dmatx->sg.length = count; + + if (dma_map_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE) != 1) { + uap->dmatx.queued = false; + dev_dbg(uap->port.dev, "unable to map TX DMA\n"); + return -EBUSY; + } + + desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE); + uap->dmatx.queued = false; + /* + * If DMA cannot be used right now, we complete this + * transaction via IRQ and let the TTY layer retry. + */ + dev_dbg(uap->port.dev, "TX DMA busy\n"); + return -EBUSY; + } + + /* Some data to go along to the callback */ + desc->callback = pl011_dma_tx_callback; + desc->callback_param = uap; + + /* All errors should happen at prepare time */ + dmaengine_submit(desc); + + /* Fire the DMA transaction */ + dma_dev->device_issue_pending(chan); + + uap->dmacr |= UART011_TXDMAE; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + uap->dmatx.queued = true; + + /* + * Now we know that DMA will fire, so advance the ring buffer + * with the stuff we just dispatched. + */ + xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx += count; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + + return 1; +} + +/* + * We received a transmit interrupt without a pending X-char but with + * pending characters. + * Locking: called with port lock held and IRQs disabled. + * Returns: + * false if we want to use PIO to transmit + * true if we queued a DMA buffer + */ +static bool pl011_dma_tx_irq(struct uart_amba_port *uap) +{ + if (!uap->using_dma) + return false; + + /* + * If we already have a TX buffer queued, but received a + * TX interrupt, it will be because we've just sent an X-char. + * Ensure the TX DMA is enabled and the TX IRQ is disabled. + */ + if (uap->dmatx.queued) { + uap->dmacr |= UART011_TXDMAE; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + uap->im &= ~UART011_TXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + return true; + } + + /* + * We don't have a TX buffer queued, so try to queue one. + * If we succesfully queued a buffer, mask the TX IRQ. + */ + if (pl011_dma_tx_refill(uap) > 0) { + uap->im &= ~UART011_TXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + return true; + } + return false; +} + +/* + * Stop the DMA transmit (eg, due to received XOFF). + * Locking: called with port lock held and IRQs disabled. + */ +static inline void pl011_dma_tx_stop(struct uart_amba_port *uap) +{ + if (uap->dmatx.queued) { + uap->dmacr &= ~UART011_TXDMAE; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + } +} + +/* + * Try to start a DMA transmit, or in the case of an XON/OFF + * character queued for send, try to get that character out ASAP. + * Locking: called with port lock held and IRQs disabled. + * Returns: + * false if we want the TX IRQ to be enabled + * true if we have a buffer queued + */ +static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) +{ + u16 dmacr; + + if (!uap->using_dma) + return false; + + if (!uap->port.x_char) { + /* no X-char, try to push chars out in DMA mode */ + bool ret = true; + + if (!uap->dmatx.queued) { + if (pl011_dma_tx_refill(uap) > 0) { + uap->im &= ~UART011_TXIM; + ret = true; + } else { + uap->im |= UART011_TXIM; + ret = false; + } + writew(uap->im, uap->port.membase + UART011_IMSC); + } else if (!(uap->dmacr & UART011_TXDMAE)) { + uap->dmacr |= UART011_TXDMAE; + writew(uap->dmacr, + uap->port.membase + UART011_DMACR); + } + return ret; + } + + /* + * We have an X-char to send. Disable DMA to prevent it loading + * the TX fifo, and then see if we can stuff it into the FIFO. + */ + dmacr = uap->dmacr; + uap->dmacr &= ~UART011_TXDMAE; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + + if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) { + /* + * No space in the FIFO, so enable the transmit interrupt + * so we know when there is space. Note that once we've + * loaded the character, we should just re-enable DMA. + */ + return false; + } + + writew(uap->port.x_char, uap->port.membase + UART01x_DR); + uap->port.icount.tx++; + uap->port.x_char = 0; + + /* Success - restore the DMA state */ + uap->dmacr = dmacr; + writew(dmacr, uap->port.membase + UART011_DMACR); + + return true; +} + +/* + * Flush the transmit buffer. + * Locking: called with port lock held and IRQs disabled. + */ +static void pl011_dma_flush_buffer(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + if (!uap->using_dma) + return; + + /* Avoid deadlock with the DMA engine callback */ + spin_unlock(&uap->port.lock); + dmaengine_terminate_all(uap->dmatx.chan); + spin_lock(&uap->port.lock); + if (uap->dmatx.queued) { + dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1, + DMA_TO_DEVICE); + uap->dmatx.queued = false; + uap->dmacr &= ~UART011_TXDMAE; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + } +} + + +static void pl011_dma_startup(struct uart_amba_port *uap) +{ + if (!uap->dmatx.chan) + return; + + uap->dmatx.buf = kmalloc(PL011_DMA_BUFFER_SIZE, GFP_KERNEL); + if (!uap->dmatx.buf) { + dev_err(uap->port.dev, "no memory for DMA TX buffer\n"); + uap->port.fifosize = uap->fifosize; + return; + } + + sg_init_one(&uap->dmatx.sg, uap->dmatx.buf, PL011_DMA_BUFFER_SIZE); + + /* The DMA buffer is now the FIFO the TTY subsystem can use */ + uap->port.fifosize = PL011_DMA_BUFFER_SIZE; + uap->using_dma = true; + + /* Turn on DMA error (RX/TX will be enabled on demand) */ + uap->dmacr |= UART011_DMAONERR; + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + + /* + * ST Micro variants has some specific dma burst threshold + * compensation. Set this to 16 bytes, so burst will only + * be issued above/below 16 bytes. + */ + if (uap->vendor->dma_threshold) + writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16, + uap->port.membase + ST_UART011_DMAWM); +} + +static void pl011_dma_shutdown(struct uart_amba_port *uap) +{ + if (!uap->using_dma) + return; + + /* Disable RX and TX DMA */ + while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) + barrier(); + + spin_lock_irq(&uap->port.lock); + uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE); + writew(uap->dmacr, uap->port.membase + UART011_DMACR); + spin_unlock_irq(&uap->port.lock); + + /* In theory, this should already be done by pl011_dma_flush_buffer */ + dmaengine_terminate_all(uap->dmatx.chan); + if (uap->dmatx.queued) { + dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1, + DMA_TO_DEVICE); + uap->dmatx.queued = false; + } + + kfree(uap->dmatx.buf); + + uap->using_dma = false; +} + +#else +/* Blank functions if the DMA engine is not available */ +static inline void pl011_dma_probe(struct uart_amba_port *uap) +{ +} + +static inline void pl011_dma_remove(struct uart_amba_port *uap) +{ +} + +static inline void pl011_dma_startup(struct uart_amba_port *uap) +{ +} + +static inline void pl011_dma_shutdown(struct uart_amba_port *uap) +{ +} + +static inline bool pl011_dma_tx_irq(struct uart_amba_port *uap) +{ + return false; +} + +static inline void pl011_dma_tx_stop(struct uart_amba_port *uap) +{ +} + +static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) +{ + return false; +} + +#define pl011_dma_flush_buffer NULL +#endif + + +static void pl011_stop_tx(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + uap->im &= ~UART011_TXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_dma_tx_stop(uap); +} + +static void pl011_start_tx(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + if (!pl011_dma_tx_start(uap)) { + uap->im |= UART011_TXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + } +} + +static void pl011_stop_rx(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM| + UART011_PEIM|UART011_BEIM|UART011_OEIM); + writew(uap->im, uap->port.membase + UART011_IMSC); +} + +static void pl011_enable_ms(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM; + writew(uap->im, uap->port.membase + UART011_IMSC); +} + +static void pl011_rx_chars(struct uart_amba_port *uap) +{ + struct tty_struct *tty = uap->port.state->port.tty; + unsigned int status, ch, flag, max_count = 256; + + status = readw(uap->port.membase + UART01x_FR); + while ((status & UART01x_FR_RXFE) == 0 && max_count--) { + ch = readw(uap->port.membase + UART01x_DR) | UART_DUMMY_DR_RX; + flag = TTY_NORMAL; + uap->port.icount.rx++; + + /* + * Note that the error handling code is + * out of the main execution path + */ + if (unlikely(ch & UART_DR_ERROR)) { + if (ch & UART011_DR_BE) { + ch &= ~(UART011_DR_FE | UART011_DR_PE); + uap->port.icount.brk++; + if (uart_handle_break(&uap->port)) + goto ignore_char; + } else if (ch & UART011_DR_PE) + uap->port.icount.parity++; + else if (ch & UART011_DR_FE) + uap->port.icount.frame++; + if (ch & UART011_DR_OE) + uap->port.icount.overrun++; + + ch &= uap->port.read_status_mask; + + if (ch & UART011_DR_BE) + flag = TTY_BREAK; + else if (ch & UART011_DR_PE) + flag = TTY_PARITY; + else if (ch & UART011_DR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&uap->port, ch & 255)) + goto ignore_char; + + uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag); + + ignore_char: + status = readw(uap->port.membase + UART01x_FR); + } + spin_unlock(&uap->port.lock); + tty_flip_buffer_push(tty); + spin_lock(&uap->port.lock); +} + +static void pl011_tx_chars(struct uart_amba_port *uap) +{ + struct circ_buf *xmit = &uap->port.state->xmit; + int count; + + if (uap->port.x_char) { + writew(uap->port.x_char, uap->port.membase + UART01x_DR); + uap->port.icount.tx++; + uap->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) { + pl011_stop_tx(&uap->port); + return; + } + + /* If we are using DMA mode, try to send some characters. */ + if (pl011_dma_tx_irq(uap)) + return; + + count = uap->fifosize >> 1; + do { + writew(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + + if (uart_circ_empty(xmit)) + pl011_stop_tx(&uap->port); +} + +static void pl011_modem_status(struct uart_amba_port *uap) +{ + unsigned int status, delta; + + status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + delta = status ^ uap->old_status; + uap->old_status = status; + + if (!delta) + return; + + if (delta & UART01x_FR_DCD) + uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); + + if (delta & UART01x_FR_DSR) + uap->port.icount.dsr++; + + if (delta & UART01x_FR_CTS) + uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); + + wake_up_interruptible(&uap->port.state->port.delta_msr_wait); +} + +static irqreturn_t pl011_int(int irq, void *dev_id) +{ + struct uart_amba_port *uap = dev_id; + unsigned long flags; + unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT; + int handled = 0; + + spin_lock_irqsave(&uap->port.lock, flags); + + status = readw(uap->port.membase + UART011_MIS); + if (status) { + do { + writew(status & ~(UART011_TXIS|UART011_RTIS| + UART011_RXIS), + uap->port.membase + UART011_ICR); + + if (status & (UART011_RTIS|UART011_RXIS)) + pl011_rx_chars(uap); + if (status & (UART011_DSRMIS|UART011_DCDMIS| + UART011_CTSMIS|UART011_RIMIS)) + pl011_modem_status(uap); + if (status & UART011_TXIS) + pl011_tx_chars(uap); + + if (pass_counter-- == 0) + break; + + status = readw(uap->port.membase + UART011_MIS); + } while (status != 0); + handled = 1; + } + + spin_unlock_irqrestore(&uap->port.lock, flags); + + return IRQ_RETVAL(handled); +} + +static unsigned int pl01x_tx_empty(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int status = readw(uap->port.membase + UART01x_FR); + return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; +} + +static unsigned int pl01x_get_mctrl(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int result = 0; + unsigned int status = readw(uap->port.membase + UART01x_FR); + +#define TIOCMBIT(uartbit, tiocmbit) \ + if (status & uartbit) \ + result |= tiocmbit + + TIOCMBIT(UART01x_FR_DCD, TIOCM_CAR); + TIOCMBIT(UART01x_FR_DSR, TIOCM_DSR); + TIOCMBIT(UART01x_FR_CTS, TIOCM_CTS); + TIOCMBIT(UART011_FR_RI, TIOCM_RNG); +#undef TIOCMBIT + return result; +} + +static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + + cr = readw(uap->port.membase + UART011_CR); + +#define TIOCMBIT(tiocmbit, uartbit) \ + if (mctrl & tiocmbit) \ + cr |= uartbit; \ + else \ + cr &= ~uartbit + + TIOCMBIT(TIOCM_RTS, UART011_CR_RTS); + TIOCMBIT(TIOCM_DTR, UART011_CR_DTR); + TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1); + TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2); + TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE); + + if (uap->autorts) { + /* We need to disable auto-RTS if we want to turn RTS off */ + TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN); + } +#undef TIOCMBIT + + writew(cr, uap->port.membase + UART011_CR); +} + +static void pl011_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned long flags; + unsigned int lcr_h; + + spin_lock_irqsave(&uap->port.lock, flags); + lcr_h = readw(uap->port.membase + uap->lcrh_tx); + if (break_state == -1) + lcr_h |= UART01x_LCRH_BRK; + else + lcr_h &= ~UART01x_LCRH_BRK; + writew(lcr_h, uap->port.membase + uap->lcrh_tx); + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +#ifdef CONFIG_CONSOLE_POLL +static int pl010_get_poll_char(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int status; + + status = readw(uap->port.membase + UART01x_FR); + if (status & UART01x_FR_RXFE) + return NO_POLL_CHAR; + + return readw(uap->port.membase + UART01x_DR); +} + +static void pl010_put_poll_char(struct uart_port *port, + unsigned char ch) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) + barrier(); + + writew(ch, uap->port.membase + UART01x_DR); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static int pl011_startup(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + int retval; + + /* + * Try to enable the clock producer. + */ + retval = clk_enable(uap->clk); + if (retval) + goto out; + + uap->port.uartclk = clk_get_rate(uap->clk); + + /* + * Allocate the IRQ + */ + retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap); + if (retval) + goto clk_dis; + + writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS); + + /* + * Provoke TX FIFO interrupt into asserting. + */ + cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE; + writew(cr, uap->port.membase + UART011_CR); + writew(0, uap->port.membase + UART011_FBRD); + writew(1, uap->port.membase + UART011_IBRD); + writew(0, uap->port.membase + uap->lcrh_rx); + if (uap->lcrh_tx != uap->lcrh_rx) { + int i; + /* + * Wait 10 PCLKs before writing LCRH_TX register, + * to get this delay write read only register 10 times + */ + for (i = 0; i < 10; ++i) + writew(0xff, uap->port.membase + UART011_MIS); + writew(0, uap->port.membase + uap->lcrh_tx); + } + writew(0, uap->port.membase + UART01x_DR); + while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) + barrier(); + + cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; + writew(cr, uap->port.membase + UART011_CR); + + /* Clear pending error interrupts */ + writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS, + uap->port.membase + UART011_ICR); + + /* + * initialise the old status of the modem signals + */ + uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + /* Startup DMA */ + pl011_dma_startup(uap); + + /* + * Finally, enable interrupts + */ + spin_lock_irq(&uap->port.lock); + uap->im = UART011_RXIM | UART011_RTIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + spin_unlock_irq(&uap->port.lock); + + return 0; + + clk_dis: + clk_disable(uap->clk); + out: + return retval; +} + +static void pl011_shutdown_channel(struct uart_amba_port *uap, + unsigned int lcrh) +{ + unsigned long val; + + val = readw(uap->port.membase + lcrh); + val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); + writew(val, uap->port.membase + lcrh); +} + +static void pl011_shutdown(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + /* + * disable all interrupts + */ + spin_lock_irq(&uap->port.lock); + uap->im = 0; + writew(uap->im, uap->port.membase + UART011_IMSC); + writew(0xffff, uap->port.membase + UART011_ICR); + spin_unlock_irq(&uap->port.lock); + + pl011_dma_shutdown(uap); + + /* + * Free the interrupt + */ + free_irq(uap->port.irq, uap); + + /* + * disable the port + */ + uap->autorts = false; + writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR); + + /* + * disable break condition and fifos + */ + pl011_shutdown_channel(uap, uap->lcrh_rx); + if (uap->lcrh_rx != uap->lcrh_tx) + pl011_shutdown_channel(uap, uap->lcrh_tx); + + /* + * Shut down the clock producer + */ + clk_disable(uap->clk); +} + +static void +pl011_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int lcr_h, old_cr; + unsigned long flags; + unsigned int baud, quot, clkdiv; + + if (uap->vendor->oversampling) + clkdiv = 8; + else + clkdiv = 16; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, + port->uartclk / clkdiv); + + if (baud > port->uartclk/16) + quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud); + else + quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud); + + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr_h = UART01x_LCRH_WLEN_5; + break; + case CS6: + lcr_h = UART01x_LCRH_WLEN_6; + break; + case CS7: + lcr_h = UART01x_LCRH_WLEN_7; + break; + default: // CS8 + lcr_h = UART01x_LCRH_WLEN_8; + break; + } + if (termios->c_cflag & CSTOPB) + lcr_h |= UART01x_LCRH_STP2; + if (termios->c_cflag & PARENB) { + lcr_h |= UART01x_LCRH_PEN; + if (!(termios->c_cflag & PARODD)) + lcr_h |= UART01x_LCRH_EPS; + } + if (uap->fifosize > 1) + lcr_h |= UART01x_LCRH_FEN; + + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = UART011_DR_OE | 255; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART011_DR_FE | UART011_DR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= UART011_DR_BE; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= UART011_DR_BE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART011_DR_OE; + } + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_DUMMY_DR_RX; + + if (UART_ENABLE_MS(port, termios->c_cflag)) + pl011_enable_ms(port); + + /* first, disable everything */ + old_cr = readw(port->membase + UART011_CR); + writew(0, port->membase + UART011_CR); + + if (termios->c_cflag & CRTSCTS) { + if (old_cr & UART011_CR_RTS) + old_cr |= UART011_CR_RTSEN; + + old_cr |= UART011_CR_CTSEN; + uap->autorts = true; + } else { + old_cr &= ~(UART011_CR_CTSEN | UART011_CR_RTSEN); + uap->autorts = false; + } + + if (uap->vendor->oversampling) { + if (baud > port->uartclk / 16) + old_cr |= ST_UART011_CR_OVSFACT; + else + old_cr &= ~ST_UART011_CR_OVSFACT; + } + + /* Set baud rate */ + writew(quot & 0x3f, port->membase + UART011_FBRD); + writew(quot >> 6, port->membase + UART011_IBRD); + + /* + * ----------v----------v----------v----------v----- + * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L + * ----------^----------^----------^----------^----- + */ + writew(lcr_h, port->membase + uap->lcrh_rx); + if (uap->lcrh_rx != uap->lcrh_tx) { + int i; + /* + * Wait 10 PCLKs before writing LCRH_TX register, + * to get this delay write read only register 10 times + */ + for (i = 0; i < 10; ++i) + writew(0xff, uap->port.membase + UART011_MIS); + writew(lcr_h, port->membase + uap->lcrh_tx); + } + writew(old_cr, port->membase + UART011_CR); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *pl011_type(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + return uap->port.type == PORT_AMBA ? uap->type : NULL; +} + +/* + * Release the memory region(s) being used by 'port' + */ +static void pl010_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, SZ_4K); +} + +/* + * Request the memory region(s) being used by 'port' + */ +static int pl010_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, SZ_4K, "uart-pl011") + != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void pl010_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_AMBA; + pl010_request_port(port); + } +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= nr_irqs) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static struct uart_ops amba_pl011_pops = { + .tx_empty = pl01x_tx_empty, + .set_mctrl = pl011_set_mctrl, + .get_mctrl = pl01x_get_mctrl, + .stop_tx = pl011_stop_tx, + .start_tx = pl011_start_tx, + .stop_rx = pl011_stop_rx, + .enable_ms = pl011_enable_ms, + .break_ctl = pl011_break_ctl, + .startup = pl011_startup, + .shutdown = pl011_shutdown, + .flush_buffer = pl011_dma_flush_buffer, + .set_termios = pl011_set_termios, + .type = pl011_type, + .release_port = pl010_release_port, + .request_port = pl010_request_port, + .config_port = pl010_config_port, + .verify_port = pl010_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = pl010_get_poll_char, + .poll_put_char = pl010_put_poll_char, +#endif +}; + +static struct uart_amba_port *amba_ports[UART_NR]; + +#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE + +static void pl011_console_putchar(struct uart_port *port, int ch) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) + barrier(); + writew(ch, uap->port.membase + UART01x_DR); +} + +static void +pl011_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_amba_port *uap = amba_ports[co->index]; + unsigned int status, old_cr, new_cr; + + clk_enable(uap->clk); + + /* + * First save the CR then disable the interrupts + */ + old_cr = readw(uap->port.membase + UART011_CR); + new_cr = old_cr & ~UART011_CR_CTSEN; + new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE; + writew(new_cr, uap->port.membase + UART011_CR); + + uart_console_write(&uap->port, s, count, pl011_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the TCR + */ + do { + status = readw(uap->port.membase + UART01x_FR); + } while (status & UART01x_FR_BUSY); + writew(old_cr, uap->port.membase + UART011_CR); + + clk_disable(uap->clk); +} + +static void __init +pl011_console_get_options(struct uart_amba_port *uap, int *baud, + int *parity, int *bits) +{ + if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) { + unsigned int lcr_h, ibrd, fbrd; + + lcr_h = readw(uap->port.membase + uap->lcrh_tx); + + *parity = 'n'; + if (lcr_h & UART01x_LCRH_PEN) { + if (lcr_h & UART01x_LCRH_EPS) + *parity = 'e'; + else + *parity = 'o'; + } + + if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) + *bits = 7; + else + *bits = 8; + + ibrd = readw(uap->port.membase + UART011_IBRD); + fbrd = readw(uap->port.membase + UART011_FBRD); + + *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); + + if (uap->vendor->oversampling) { + if (readw(uap->port.membase + UART011_CR) + & ST_UART011_CR_OVSFACT) + *baud *= 2; + } + } +} + +static int __init pl011_console_setup(struct console *co, char *options) +{ + struct uart_amba_port *uap; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + uap = amba_ports[co->index]; + if (!uap) + return -ENODEV; + + uap->port.uartclk = clk_get_rate(uap->clk); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + pl011_console_get_options(uap, &baud, &parity, &bits); + + return uart_set_options(&uap->port, co, baud, parity, bits, flow); +} + +static struct uart_driver amba_reg; +static struct console amba_console = { + .name = "ttyAMA", + .write = pl011_console_write, + .device = uart_console_device, + .setup = pl011_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &amba_reg, +}; + +#define AMBA_CONSOLE (&amba_console) +#else +#define AMBA_CONSOLE NULL +#endif + +static struct uart_driver amba_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyAMA", + .dev_name = "ttyAMA", + .major = SERIAL_AMBA_MAJOR, + .minor = SERIAL_AMBA_MINOR, + .nr = UART_NR, + .cons = AMBA_CONSOLE, +}; + +static int pl011_probe(struct amba_device *dev, struct amba_id *id) +{ + struct uart_amba_port *uap; + struct vendor_data *vendor = id->data; + void __iomem *base; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == NULL) + break; + + if (i == ARRAY_SIZE(amba_ports)) { + ret = -EBUSY; + goto out; + } + + uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL); + if (uap == NULL) { + ret = -ENOMEM; + goto out; + } + + base = ioremap(dev->res.start, resource_size(&dev->res)); + if (!base) { + ret = -ENOMEM; + goto free; + } + + uap->clk = clk_get(&dev->dev, NULL); + if (IS_ERR(uap->clk)) { + ret = PTR_ERR(uap->clk); + goto unmap; + } + + uap->vendor = vendor; + uap->lcrh_rx = vendor->lcrh_rx; + uap->lcrh_tx = vendor->lcrh_tx; + uap->fifosize = vendor->fifosize; + uap->port.dev = &dev->dev; + uap->port.mapbase = dev->res.start; + uap->port.membase = base; + uap->port.iotype = UPIO_MEM; + uap->port.irq = dev->irq[0]; + uap->port.fifosize = uap->fifosize; + uap->port.ops = &amba_pl011_pops; + uap->port.flags = UPF_BOOT_AUTOCONF; + uap->port.line = i; + pl011_dma_probe(uap); + + snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev)); + + amba_ports[i] = uap; + + amba_set_drvdata(dev, uap); + ret = uart_add_one_port(&amba_reg, &uap->port); + if (ret) { + amba_set_drvdata(dev, NULL); + amba_ports[i] = NULL; + pl011_dma_remove(uap); + clk_put(uap->clk); + unmap: + iounmap(base); + free: + kfree(uap); + } + out: + return ret; +} + +static int pl011_remove(struct amba_device *dev) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + int i; + + amba_set_drvdata(dev, NULL); + + uart_remove_one_port(&amba_reg, &uap->port); + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == uap) + amba_ports[i] = NULL; + + pl011_dma_remove(uap); + iounmap(uap->port.membase); + clk_put(uap->clk); + kfree(uap); + return 0; +} + +#ifdef CONFIG_PM +static int pl011_suspend(struct amba_device *dev, pm_message_t state) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + + if (!uap) + return -EINVAL; + + return uart_suspend_port(&amba_reg, &uap->port); +} + +static int pl011_resume(struct amba_device *dev) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + + if (!uap) + return -EINVAL; + + return uart_resume_port(&amba_reg, &uap->port); +} +#endif + +static struct amba_id pl011_ids[] = { + { + .id = 0x00041011, + .mask = 0x000fffff, + .data = &vendor_arm, + }, + { + .id = 0x00380802, + .mask = 0x00ffffff, + .data = &vendor_st, + }, + { 0, 0 }, +}; + +static struct amba_driver pl011_driver = { + .drv = { + .name = "uart-pl011", + }, + .id_table = pl011_ids, + .probe = pl011_probe, + .remove = pl011_remove, +#ifdef CONFIG_PM + .suspend = pl011_suspend, + .resume = pl011_resume, +#endif +}; + +static int __init pl011_init(void) +{ + int ret; + printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); + + ret = uart_register_driver(&amba_reg); + if (ret == 0) { + ret = amba_driver_register(&pl011_driver); + if (ret) + uart_unregister_driver(&amba_reg); + } + return ret; +} + +static void __exit pl011_exit(void) +{ + amba_driver_unregister(&pl011_driver); + uart_unregister_driver(&amba_reg); +} + +/* + * While this can be a module, if builtin it's most likely the console + * So let's leave module_exit but move module_init to an earlier place + */ +arch_initcall(pl011_init); +module_exit(pl011_exit); + +MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("ARM AMBA serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c new file mode 100644 index 000000000000..095a5d562618 --- /dev/null +++ b/drivers/tty/serial/apbuart.c @@ -0,0 +1,709 @@ +/* + * Driver for GRLIB serial ports (APBUART) + * + * Based on linux/drivers/serial/amba.c + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * Copyright (C) 2003 Konrad Eisele + * Copyright (C) 2006 Daniel Hellstrom , Aeroflex Gaisler AB + * Copyright (C) 2008 Gilead Kutnick + * Copyright (C) 2009 Kristoffer Glembo , Aeroflex Gaisler AB + */ + +#if defined(CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "apbuart.h" + +#define SERIAL_APBUART_MAJOR TTY_MAJOR +#define SERIAL_APBUART_MINOR 64 +#define UART_DUMMY_RSR_RX 0x8000 /* for ignore all read */ + +static void apbuart_tx_chars(struct uart_port *port); + +static void apbuart_stop_tx(struct uart_port *port) +{ + unsigned int cr; + + cr = UART_GET_CTRL(port); + cr &= ~UART_CTRL_TI; + UART_PUT_CTRL(port, cr); +} + +static void apbuart_start_tx(struct uart_port *port) +{ + unsigned int cr; + + cr = UART_GET_CTRL(port); + cr |= UART_CTRL_TI; + UART_PUT_CTRL(port, cr); + + if (UART_GET_STATUS(port) & UART_STATUS_THE) + apbuart_tx_chars(port); +} + +static void apbuart_stop_rx(struct uart_port *port) +{ + unsigned int cr; + + cr = UART_GET_CTRL(port); + cr &= ~(UART_CTRL_RI); + UART_PUT_CTRL(port, cr); +} + +static void apbuart_enable_ms(struct uart_port *port) +{ + /* No modem status change interrupts for APBUART */ +} + +static void apbuart_rx_chars(struct uart_port *port) +{ + struct tty_struct *tty = port->state->port.tty; + unsigned int status, ch, rsr, flag; + unsigned int max_chars = port->fifosize; + + status = UART_GET_STATUS(port); + + while (UART_RX_DATA(status) && (max_chars--)) { + + ch = UART_GET_CHAR(port); + flag = TTY_NORMAL; + + port->icount.rx++; + + rsr = UART_GET_STATUS(port) | UART_DUMMY_RSR_RX; + UART_PUT_STATUS(port, 0); + if (rsr & UART_STATUS_ERR) { + + if (rsr & UART_STATUS_BR) { + rsr &= ~(UART_STATUS_FE | UART_STATUS_PE); + port->icount.brk++; + if (uart_handle_break(port)) + goto ignore_char; + } else if (rsr & UART_STATUS_PE) { + port->icount.parity++; + } else if (rsr & UART_STATUS_FE) { + port->icount.frame++; + } + if (rsr & UART_STATUS_OE) + port->icount.overrun++; + + rsr &= port->read_status_mask; + + if (rsr & UART_STATUS_PE) + flag = TTY_PARITY; + else if (rsr & UART_STATUS_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + goto ignore_char; + + uart_insert_char(port, rsr, UART_STATUS_OE, ch, flag); + + + ignore_char: + status = UART_GET_STATUS(port); + } + + tty_flip_buffer_push(tty); +} + +static void apbuart_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + int count; + + if (port->x_char) { + UART_PUT_CHAR(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + apbuart_stop_tx(port); + return; + } + + /* amba: fill FIFO */ + count = port->fifosize >> 1; + do { + UART_PUT_CHAR(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + apbuart_stop_tx(port); +} + +static irqreturn_t apbuart_int(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned int status; + + spin_lock(&port->lock); + + status = UART_GET_STATUS(port); + if (status & UART_STATUS_DR) + apbuart_rx_chars(port); + if (status & UART_STATUS_THE) + apbuart_tx_chars(port); + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static unsigned int apbuart_tx_empty(struct uart_port *port) +{ + unsigned int status = UART_GET_STATUS(port); + return status & UART_STATUS_THE ? TIOCSER_TEMT : 0; +} + +static unsigned int apbuart_get_mctrl(struct uart_port *port) +{ + /* The GRLIB APBUART handles flow control in hardware */ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +static void apbuart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* The GRLIB APBUART handles flow control in hardware */ +} + +static void apbuart_break_ctl(struct uart_port *port, int break_state) +{ + /* We don't support sending break */ +} + +static int apbuart_startup(struct uart_port *port) +{ + int retval; + unsigned int cr; + + /* Allocate the IRQ */ + retval = request_irq(port->irq, apbuart_int, 0, "apbuart", port); + if (retval) + return retval; + + /* Finally, enable interrupts */ + cr = UART_GET_CTRL(port); + UART_PUT_CTRL(port, + cr | UART_CTRL_RE | UART_CTRL_TE | + UART_CTRL_RI | UART_CTRL_TI); + + return 0; +} + +static void apbuart_shutdown(struct uart_port *port) +{ + unsigned int cr; + + /* disable all interrupts, disable the port */ + cr = UART_GET_CTRL(port); + UART_PUT_CTRL(port, + cr & ~(UART_CTRL_RE | UART_CTRL_TE | + UART_CTRL_RI | UART_CTRL_TI)); + + /* Free the interrupt */ + free_irq(port->irq, port); +} + +static void apbuart_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + unsigned int cr; + unsigned long flags; + unsigned int baud, quot; + + /* Ask the core to calculate the divisor for us. */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + if (baud == 0) + panic("invalid baudrate %i\n", port->uartclk / 16); + + /* uart_get_divisor calc a *16 uart freq, apbuart is *8 */ + quot = (uart_get_divisor(port, baud)) * 2; + cr = UART_GET_CTRL(port); + cr &= ~(UART_CTRL_PE | UART_CTRL_PS); + + if (termios->c_cflag & PARENB) { + cr |= UART_CTRL_PE; + if ((termios->c_cflag & PARODD)) + cr |= UART_CTRL_PS; + } + + /* Enable flow control. */ + if (termios->c_cflag & CRTSCTS) + cr |= UART_CTRL_FL; + + spin_lock_irqsave(&port->lock, flags); + + /* Update the per-port timeout. */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = UART_STATUS_OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART_STATUS_FE | UART_STATUS_PE; + + /* Characters to ignore */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART_STATUS_FE | UART_STATUS_PE; + + /* Ignore all characters if CREAD is not set. */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_DUMMY_RSR_RX; + + /* Set baud rate */ + quot -= 1; + UART_PUT_SCAL(port, quot); + UART_PUT_CTRL(port, cr); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *apbuart_type(struct uart_port *port) +{ + return port->type == PORT_APBUART ? "GRLIB/APBUART" : NULL; +} + +static void apbuart_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, 0x100); +} + +static int apbuart_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, 0x100, "grlib-apbuart") + != NULL ? 0 : -EBUSY; + return 0; +} + +/* Configure/autoconfigure the port */ +static void apbuart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_APBUART; + apbuart_request_port(port); + } +} + +/* Verify the new serial_struct (for TIOCSSERIAL) */ +static int apbuart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_APBUART) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= NR_IRQS) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static struct uart_ops grlib_apbuart_ops = { + .tx_empty = apbuart_tx_empty, + .set_mctrl = apbuart_set_mctrl, + .get_mctrl = apbuart_get_mctrl, + .stop_tx = apbuart_stop_tx, + .start_tx = apbuart_start_tx, + .stop_rx = apbuart_stop_rx, + .enable_ms = apbuart_enable_ms, + .break_ctl = apbuart_break_ctl, + .startup = apbuart_startup, + .shutdown = apbuart_shutdown, + .set_termios = apbuart_set_termios, + .type = apbuart_type, + .release_port = apbuart_release_port, + .request_port = apbuart_request_port, + .config_port = apbuart_config_port, + .verify_port = apbuart_verify_port, +}; + +static struct uart_port grlib_apbuart_ports[UART_NR]; +static struct device_node *grlib_apbuart_nodes[UART_NR]; + +static int apbuart_scan_fifo_size(struct uart_port *port, int portnumber) +{ + int ctrl, loop = 0; + int status; + int fifosize; + unsigned long flags; + + ctrl = UART_GET_CTRL(port); + + /* + * Enable the transceiver and wait for it to be ready to send data. + * Clear interrupts so that this process will not be externally + * interrupted in the middle (which can cause the transceiver to + * drain prematurely). + */ + + local_irq_save(flags); + + UART_PUT_CTRL(port, ctrl | UART_CTRL_TE); + + while (!UART_TX_READY(UART_GET_STATUS(port))) + loop++; + + /* + * Disable the transceiver so data isn't actually sent during the + * actual test. + */ + + UART_PUT_CTRL(port, ctrl & ~(UART_CTRL_TE)); + + fifosize = 1; + UART_PUT_CHAR(port, 0); + + /* + * So long as transmitting a character increments the tranceivier FIFO + * length the FIFO must be at least that big. These bytes will + * automatically drain off of the FIFO. + */ + + status = UART_GET_STATUS(port); + while (((status >> 20) & 0x3F) == fifosize) { + fifosize++; + UART_PUT_CHAR(port, 0); + status = UART_GET_STATUS(port); + } + + fifosize--; + + UART_PUT_CTRL(port, ctrl); + local_irq_restore(flags); + + if (fifosize == 0) + fifosize = 1; + + return fifosize; +} + +static void apbuart_flush_fifo(struct uart_port *port) +{ + int i; + + for (i = 0; i < port->fifosize; i++) + UART_GET_CHAR(port); +} + + +/* ======================================================================== */ +/* Console driver, if enabled */ +/* ======================================================================== */ + +#ifdef CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE + +static void apbuart_console_putchar(struct uart_port *port, int ch) +{ + unsigned int status; + do { + status = UART_GET_STATUS(port); + } while (!UART_TX_READY(status)); + UART_PUT_CHAR(port, ch); +} + +static void +apbuart_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_port *port = &grlib_apbuart_ports[co->index]; + unsigned int status, old_cr, new_cr; + + /* First save the CR then disable the interrupts */ + old_cr = UART_GET_CTRL(port); + new_cr = old_cr & ~(UART_CTRL_RI | UART_CTRL_TI); + UART_PUT_CTRL(port, new_cr); + + uart_console_write(port, s, count, apbuart_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the TCR + */ + do { + status = UART_GET_STATUS(port); + } while (!UART_TX_READY(status)); + UART_PUT_CTRL(port, old_cr); +} + +static void __init +apbuart_console_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + if (UART_GET_CTRL(port) & (UART_CTRL_RE | UART_CTRL_TE)) { + + unsigned int quot, status; + status = UART_GET_STATUS(port); + + *parity = 'n'; + if (status & UART_CTRL_PE) { + if ((status & UART_CTRL_PS) == 0) + *parity = 'e'; + else + *parity = 'o'; + } + + *bits = 8; + quot = UART_GET_SCAL(port) / 8; + *baud = port->uartclk / (16 * (quot + 1)); + } +} + +static int __init apbuart_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + pr_debug("apbuart_console_setup co=%p, co->index=%i, options=%s\n", + co, co->index, options); + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= grlib_apbuart_port_nr) + co->index = 0; + + port = &grlib_apbuart_ports[co->index]; + + spin_lock_init(&port->lock); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + apbuart_console_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver grlib_apbuart_driver; + +static struct console grlib_apbuart_console = { + .name = "ttyS", + .write = apbuart_console_write, + .device = uart_console_device, + .setup = apbuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &grlib_apbuart_driver, +}; + + +static int grlib_apbuart_configure(void); + +static int __init apbuart_console_init(void) +{ + if (grlib_apbuart_configure()) + return -ENODEV; + register_console(&grlib_apbuart_console); + return 0; +} + +console_initcall(apbuart_console_init); + +#define APBUART_CONSOLE (&grlib_apbuart_console) +#else +#define APBUART_CONSOLE NULL +#endif + +static struct uart_driver grlib_apbuart_driver = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = SERIAL_APBUART_MAJOR, + .minor = SERIAL_APBUART_MINOR, + .nr = UART_NR, + .cons = APBUART_CONSOLE, +}; + + +/* ======================================================================== */ +/* OF Platform Driver */ +/* ======================================================================== */ + +static int __devinit apbuart_probe(struct platform_device *op, + const struct of_device_id *match) +{ + int i = -1; + struct uart_port *port = NULL; + + i = 0; + for (i = 0; i < grlib_apbuart_port_nr; i++) { + if (op->dev.of_node == grlib_apbuart_nodes[i]) + break; + } + + port = &grlib_apbuart_ports[i]; + port->dev = &op->dev; + + uart_add_one_port(&grlib_apbuart_driver, (struct uart_port *) port); + + apbuart_flush_fifo((struct uart_port *) port); + + printk(KERN_INFO "grlib-apbuart at 0x%llx, irq %d\n", + (unsigned long long) port->mapbase, port->irq); + return 0; +} + +static struct of_device_id __initdata apbuart_match[] = { + { + .name = "GAISLER_APBUART", + }, + { + .name = "01_00c", + }, + {}, +}; + +static struct of_platform_driver grlib_apbuart_of_driver = { + .probe = apbuart_probe, + .driver = { + .owner = THIS_MODULE, + .name = "grlib-apbuart", + .of_match_table = apbuart_match, + }, +}; + + +static int grlib_apbuart_configure(void) +{ + struct device_node *np, *rp; + const u32 *prop; + int freq_khz, line = 0; + + /* Get bus frequency */ + rp = of_find_node_by_path("/"); + if (!rp) + return -ENODEV; + rp = of_get_next_child(rp, NULL); + if (!rp) + return -ENODEV; + prop = of_get_property(rp, "clock-frequency", NULL); + if (!prop) + return -ENODEV; + freq_khz = *prop; + + for_each_matching_node(np, apbuart_match) { + const int *irqs, *ampopts; + const struct amba_prom_registers *regs; + struct uart_port *port; + unsigned long addr; + + ampopts = of_get_property(np, "ampopts", NULL); + if (ampopts && (*ampopts == 0)) + continue; /* Ignore if used by another OS instance */ + + irqs = of_get_property(np, "interrupts", NULL); + regs = of_get_property(np, "reg", NULL); + + if (!irqs || !regs) + continue; + + grlib_apbuart_nodes[line] = np; + + addr = regs->phys_addr; + + port = &grlib_apbuart_ports[line]; + + port->mapbase = addr; + port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map)); + port->irq = *irqs; + port->iotype = UPIO_MEM; + port->ops = &grlib_apbuart_ops; + port->flags = UPF_BOOT_AUTOCONF; + port->line = line; + port->uartclk = freq_khz * 1000; + port->fifosize = apbuart_scan_fifo_size((struct uart_port *) port, line); + line++; + + /* We support maximum UART_NR uarts ... */ + if (line == UART_NR) + break; + } + + grlib_apbuart_driver.nr = grlib_apbuart_port_nr = line; + return line ? 0 : -ENODEV; +} + +static int __init grlib_apbuart_init(void) +{ + int ret; + + /* Find all APBUARTS in device the tree and initialize their ports */ + ret = grlib_apbuart_configure(); + if (ret) + return ret; + + printk(KERN_INFO "Serial: GRLIB APBUART driver\n"); + + ret = uart_register_driver(&grlib_apbuart_driver); + + if (ret) { + printk(KERN_ERR "%s: uart_register_driver failed (%i)\n", + __FILE__, ret); + return ret; + } + + ret = of_register_platform_driver(&grlib_apbuart_of_driver); + if (ret) { + printk(KERN_ERR + "%s: of_register_platform_driver failed (%i)\n", + __FILE__, ret); + uart_unregister_driver(&grlib_apbuart_driver); + return ret; + } + + return ret; +} + +static void __exit grlib_apbuart_exit(void) +{ + int i; + + for (i = 0; i < grlib_apbuart_port_nr; i++) + uart_remove_one_port(&grlib_apbuart_driver, + &grlib_apbuart_ports[i]); + + uart_unregister_driver(&grlib_apbuart_driver); + of_unregister_platform_driver(&grlib_apbuart_of_driver); +} + +module_init(grlib_apbuart_init); +module_exit(grlib_apbuart_exit); + +MODULE_AUTHOR("Aeroflex Gaisler AB"); +MODULE_DESCRIPTION("GRLIB APBUART serial driver"); +MODULE_VERSION("2.1"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/apbuart.h b/drivers/tty/serial/apbuart.h new file mode 100644 index 000000000000..5faf87c8d2bc --- /dev/null +++ b/drivers/tty/serial/apbuart.h @@ -0,0 +1,64 @@ +#ifndef __GRLIB_APBUART_H__ +#define __GRLIB_APBUART_H__ + +#include + +#define UART_NR 8 +static int grlib_apbuart_port_nr; + +struct grlib_apbuart_regs_map { + u32 data; + u32 status; + u32 ctrl; + u32 scaler; +}; + +struct amba_prom_registers { + unsigned int phys_addr; + unsigned int reg_size; +}; + +/* + * The following defines the bits in the APBUART Status Registers. + */ +#define UART_STATUS_DR 0x00000001 /* Data Ready */ +#define UART_STATUS_TSE 0x00000002 /* TX Send Register Empty */ +#define UART_STATUS_THE 0x00000004 /* TX Hold Register Empty */ +#define UART_STATUS_BR 0x00000008 /* Break Error */ +#define UART_STATUS_OE 0x00000010 /* RX Overrun Error */ +#define UART_STATUS_PE 0x00000020 /* RX Parity Error */ +#define UART_STATUS_FE 0x00000040 /* RX Framing Error */ +#define UART_STATUS_ERR 0x00000078 /* Error Mask */ + +/* + * The following defines the bits in the APBUART Ctrl Registers. + */ +#define UART_CTRL_RE 0x00000001 /* Receiver enable */ +#define UART_CTRL_TE 0x00000002 /* Transmitter enable */ +#define UART_CTRL_RI 0x00000004 /* Receiver interrupt enable */ +#define UART_CTRL_TI 0x00000008 /* Transmitter irq */ +#define UART_CTRL_PS 0x00000010 /* Parity select */ +#define UART_CTRL_PE 0x00000020 /* Parity enable */ +#define UART_CTRL_FL 0x00000040 /* Flow control enable */ +#define UART_CTRL_LB 0x00000080 /* Loopback enable */ + +#define APBBASE(port) ((struct grlib_apbuart_regs_map *)((port)->membase)) + +#define APBBASE_DATA_P(port) (&(APBBASE(port)->data)) +#define APBBASE_STATUS_P(port) (&(APBBASE(port)->status)) +#define APBBASE_CTRL_P(port) (&(APBBASE(port)->ctrl)) +#define APBBASE_SCALAR_P(port) (&(APBBASE(port)->scaler)) + +#define UART_GET_CHAR(port) (__raw_readl(APBBASE_DATA_P(port))) +#define UART_PUT_CHAR(port, v) (__raw_writel(v, APBBASE_DATA_P(port))) +#define UART_GET_STATUS(port) (__raw_readl(APBBASE_STATUS_P(port))) +#define UART_PUT_STATUS(port, v)(__raw_writel(v, APBBASE_STATUS_P(port))) +#define UART_GET_CTRL(port) (__raw_readl(APBBASE_CTRL_P(port))) +#define UART_PUT_CTRL(port, v) (__raw_writel(v, APBBASE_CTRL_P(port))) +#define UART_GET_SCAL(port) (__raw_readl(APBBASE_SCALAR_P(port))) +#define UART_PUT_SCAL(port, v) (__raw_writel(v, APBBASE_SCALAR_P(port))) + +#define UART_RX_DATA(s) (((s) & UART_STATUS_DR) != 0) +#define UART_TX_READY(s) (((s) & UART_STATUS_THE) != 0) + +#endif /* __GRLIB_APBUART_H__ */ diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c new file mode 100644 index 000000000000..3892666b5fbd --- /dev/null +++ b/drivers/tty/serial/atmel_serial.c @@ -0,0 +1,1808 @@ +/* + * linux/drivers/char/atmel_serial.c + * + * Driver for Atmel AT91 / AT32 Serial ports + * Copyright (C) 2003 Rick Bronson + * + * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd. + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * DMA support added by Chip Coldwell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#ifdef CONFIG_ARM +#include +#include +#endif + +#define PDC_BUFFER_SIZE 512 +/* Revisit: We should calculate this based on the actual port settings */ +#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */ + +#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +static void atmel_start_rx(struct uart_port *port); +static void atmel_stop_rx(struct uart_port *port); + +#ifdef CONFIG_SERIAL_ATMEL_TTYAT + +/* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we + * should coexist with the 8250 driver, such as if we have an external 16C550 + * UART. */ +#define SERIAL_ATMEL_MAJOR 204 +#define MINOR_START 154 +#define ATMEL_DEVICENAME "ttyAT" + +#else + +/* Use device name ttyS, major 4, minor 64-68. This is the usual serial port + * name, but it is legally reserved for the 8250 driver. */ +#define SERIAL_ATMEL_MAJOR TTY_MAJOR +#define MINOR_START 64 +#define ATMEL_DEVICENAME "ttyS" + +#endif + +#define ATMEL_ISR_PASS_LIMIT 256 + +/* UART registers. CR is write-only, hence no GET macro */ +#define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR) +#define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR) +#define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR) +#define UART_PUT_IER(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IER) +#define UART_PUT_IDR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IDR) +#define UART_GET_IMR(port) __raw_readl((port)->membase + ATMEL_US_IMR) +#define UART_GET_CSR(port) __raw_readl((port)->membase + ATMEL_US_CSR) +#define UART_GET_CHAR(port) __raw_readl((port)->membase + ATMEL_US_RHR) +#define UART_PUT_CHAR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_THR) +#define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR) +#define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR) +#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR) +#define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR) + + /* PDC registers */ +#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR) +#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR) + +#define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR) +#define UART_GET_RPR(port) __raw_readl((port)->membase + ATMEL_PDC_RPR) +#define UART_PUT_RCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RCR) +#define UART_PUT_RNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNPR) +#define UART_PUT_RNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNCR) + +#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR) +#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR) +#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR) + +static int (*atmel_open_hook)(struct uart_port *); +static void (*atmel_close_hook)(struct uart_port *); + +struct atmel_dma_buffer { + unsigned char *buf; + dma_addr_t dma_addr; + unsigned int dma_size; + unsigned int ofs; +}; + +struct atmel_uart_char { + u16 status; + u16 ch; +}; + +#define ATMEL_SERIAL_RINGSIZE 1024 + +/* + * We wrap our port structure around the generic uart_port. + */ +struct atmel_uart_port { + struct uart_port uart; /* uart */ + struct clk *clk; /* uart clock */ + int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */ + u32 backup_imr; /* IMR saved during suspend */ + int break_active; /* break being received */ + + short use_dma_rx; /* enable PDC receiver */ + short pdc_rx_idx; /* current PDC RX buffer */ + struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */ + + short use_dma_tx; /* enable PDC transmitter */ + struct atmel_dma_buffer pdc_tx; /* PDC transmitter */ + + struct tasklet_struct tasklet; + unsigned int irq_status; + unsigned int irq_status_prev; + + struct circ_buf rx_ring; + + struct serial_rs485 rs485; /* rs485 settings */ + unsigned int tx_done_mask; +}; + +static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART]; + +#ifdef SUPPORT_SYSRQ +static struct console atmel_console; +#endif + +static inline struct atmel_uart_port * +to_atmel_uart_port(struct uart_port *uart) +{ + return container_of(uart, struct atmel_uart_port, uart); +} + +#ifdef CONFIG_SERIAL_ATMEL_PDC +static bool atmel_use_dma_rx(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + return atmel_port->use_dma_rx; +} + +static bool atmel_use_dma_tx(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + return atmel_port->use_dma_tx; +} +#else +static bool atmel_use_dma_rx(struct uart_port *port) +{ + return false; +} + +static bool atmel_use_dma_tx(struct uart_port *port) +{ + return false; +} +#endif + +/* Enable or disable the rs485 support */ +void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int mode; + + spin_lock(&port->lock); + + /* Disable interrupts */ + UART_PUT_IDR(port, atmel_port->tx_done_mask); + + mode = UART_GET_MR(port); + + /* Resetting serial mode to RS232 (0x0) */ + mode &= ~ATMEL_US_USMODE; + + atmel_port->rs485 = *rs485conf; + + if (rs485conf->flags & SER_RS485_ENABLED) { + dev_dbg(port->dev, "Setting UART to RS485\n"); + atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; + if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND) + UART_PUT_TTGR(port, rs485conf->delay_rts_after_send); + mode |= ATMEL_US_USMODE_RS485; + } else { + dev_dbg(port->dev, "Setting UART to RS232\n"); + if (atmel_use_dma_tx(port)) + atmel_port->tx_done_mask = ATMEL_US_ENDTX | + ATMEL_US_TXBUFE; + else + atmel_port->tx_done_mask = ATMEL_US_TXRDY; + } + UART_PUT_MR(port, mode); + + /* Enable interrupts */ + UART_PUT_IER(port, atmel_port->tx_done_mask); + + spin_unlock(&port->lock); + +} + +/* + * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty. + */ +static u_int atmel_tx_empty(struct uart_port *port) +{ + return (UART_GET_CSR(port) & ATMEL_US_TXEMPTY) ? TIOCSER_TEMT : 0; +} + +/* + * Set state of the modem control output lines + */ +static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) +{ + unsigned int control = 0; + unsigned int mode; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + +#ifdef CONFIG_ARCH_AT91RM9200 + if (cpu_is_at91rm9200()) { + /* + * AT91RM9200 Errata #39: RTS0 is not internally connected + * to PA21. We need to drive the pin manually. + */ + if (port->mapbase == AT91RM9200_BASE_US0) { + if (mctrl & TIOCM_RTS) + at91_set_gpio_value(AT91_PIN_PA21, 0); + else + at91_set_gpio_value(AT91_PIN_PA21, 1); + } + } +#endif + + if (mctrl & TIOCM_RTS) + control |= ATMEL_US_RTSEN; + else + control |= ATMEL_US_RTSDIS; + + if (mctrl & TIOCM_DTR) + control |= ATMEL_US_DTREN; + else + control |= ATMEL_US_DTRDIS; + + UART_PUT_CR(port, control); + + /* Local loopback mode? */ + mode = UART_GET_MR(port) & ~ATMEL_US_CHMODE; + if (mctrl & TIOCM_LOOP) + mode |= ATMEL_US_CHMODE_LOC_LOOP; + else + mode |= ATMEL_US_CHMODE_NORMAL; + + /* Resetting serial mode to RS232 (0x0) */ + mode &= ~ATMEL_US_USMODE; + + if (atmel_port->rs485.flags & SER_RS485_ENABLED) { + dev_dbg(port->dev, "Setting UART to RS485\n"); + if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + UART_PUT_TTGR(port, + atmel_port->rs485.delay_rts_after_send); + mode |= ATMEL_US_USMODE_RS485; + } else { + dev_dbg(port->dev, "Setting UART to RS232\n"); + } + UART_PUT_MR(port, mode); +} + +/* + * Get state of the modem control input lines + */ +static u_int atmel_get_mctrl(struct uart_port *port) +{ + unsigned int status, ret = 0; + + status = UART_GET_CSR(port); + + /* + * The control signals are active low. + */ + if (!(status & ATMEL_US_DCD)) + ret |= TIOCM_CD; + if (!(status & ATMEL_US_CTS)) + ret |= TIOCM_CTS; + if (!(status & ATMEL_US_DSR)) + ret |= TIOCM_DSR; + if (!(status & ATMEL_US_RI)) + ret |= TIOCM_RI; + + return ret; +} + +/* + * Stop transmitting. + */ +static void atmel_stop_tx(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_use_dma_tx(port)) { + /* disable PDC transmit */ + UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); + } + /* Disable interrupts */ + UART_PUT_IDR(port, atmel_port->tx_done_mask); + + if (atmel_port->rs485.flags & SER_RS485_ENABLED) + atmel_start_rx(port); +} + +/* + * Start transmitting. + */ +static void atmel_start_tx(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_use_dma_tx(port)) { + if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN) + /* The transmitter is already running. Yes, we + really need this.*/ + return; + + if (atmel_port->rs485.flags & SER_RS485_ENABLED) + atmel_stop_rx(port); + + /* re-enable PDC transmit */ + UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); + } + /* Enable interrupts */ + UART_PUT_IER(port, atmel_port->tx_done_mask); +} + +/* + * start receiving - port is in process of being opened. + */ +static void atmel_start_rx(struct uart_port *port) +{ + UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */ + + if (atmel_use_dma_rx(port)) { + /* enable PDC controller */ + UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | + port->read_status_mask); + UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); + } else { + UART_PUT_IER(port, ATMEL_US_RXRDY); + } +} + +/* + * Stop receiving - port is in process of being closed. + */ +static void atmel_stop_rx(struct uart_port *port) +{ + if (atmel_use_dma_rx(port)) { + /* disable PDC receive */ + UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); + UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | + port->read_status_mask); + } else { + UART_PUT_IDR(port, ATMEL_US_RXRDY); + } +} + +/* + * Enable modem status interrupts + */ +static void atmel_enable_ms(struct uart_port *port) +{ + UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC + | ATMEL_US_DCDIC | ATMEL_US_CTSIC); +} + +/* + * Control the transmission of a break signal + */ +static void atmel_break_ctl(struct uart_port *port, int break_state) +{ + if (break_state != 0) + UART_PUT_CR(port, ATMEL_US_STTBRK); /* start break */ + else + UART_PUT_CR(port, ATMEL_US_STPBRK); /* stop break */ +} + +/* + * Stores the incoming character in the ring buffer + */ +static void +atmel_buffer_rx_char(struct uart_port *port, unsigned int status, + unsigned int ch) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct circ_buf *ring = &atmel_port->rx_ring; + struct atmel_uart_char *c; + + if (!CIRC_SPACE(ring->head, ring->tail, ATMEL_SERIAL_RINGSIZE)) + /* Buffer overflow, ignore char */ + return; + + c = &((struct atmel_uart_char *)ring->buf)[ring->head]; + c->status = status; + c->ch = ch; + + /* Make sure the character is stored before we update head. */ + smp_wmb(); + + ring->head = (ring->head + 1) & (ATMEL_SERIAL_RINGSIZE - 1); +} + +/* + * Deal with parity, framing and overrun errors. + */ +static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status) +{ + /* clear error */ + UART_PUT_CR(port, ATMEL_US_RSTSTA); + + if (status & ATMEL_US_RXBRK) { + /* ignore side-effect */ + status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); + port->icount.brk++; + } + if (status & ATMEL_US_PARE) + port->icount.parity++; + if (status & ATMEL_US_FRAME) + port->icount.frame++; + if (status & ATMEL_US_OVRE) + port->icount.overrun++; +} + +/* + * Characters received (called from interrupt handler) + */ +static void atmel_rx_chars(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int status, ch; + + status = UART_GET_CSR(port); + while (status & ATMEL_US_RXRDY) { + ch = UART_GET_CHAR(port); + + /* + * note that the error handling code is + * out of the main execution path + */ + if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME + | ATMEL_US_OVRE | ATMEL_US_RXBRK) + || atmel_port->break_active)) { + + /* clear error */ + UART_PUT_CR(port, ATMEL_US_RSTSTA); + + if (status & ATMEL_US_RXBRK + && !atmel_port->break_active) { + atmel_port->break_active = 1; + UART_PUT_IER(port, ATMEL_US_RXBRK); + } else { + /* + * This is either the end-of-break + * condition or we've received at + * least one character without RXBRK + * being set. In both cases, the next + * RXBRK will indicate start-of-break. + */ + UART_PUT_IDR(port, ATMEL_US_RXBRK); + status &= ~ATMEL_US_RXBRK; + atmel_port->break_active = 0; + } + } + + atmel_buffer_rx_char(port, status, ch); + status = UART_GET_CSR(port); + } + + tasklet_schedule(&atmel_port->tasklet); +} + +/* + * Transmit characters (called from tasklet with TXRDY interrupt + * disabled) + */ +static void atmel_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (port->x_char && UART_GET_CSR(port) & atmel_port->tx_done_mask) { + UART_PUT_CHAR(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + while (UART_GET_CSR(port) & atmel_port->tx_done_mask) { + UART_PUT_CHAR(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (!uart_circ_empty(xmit)) + /* Enable interrupts */ + UART_PUT_IER(port, atmel_port->tx_done_mask); +} + +/* + * receive interrupt handler. + */ +static void +atmel_handle_receive(struct uart_port *port, unsigned int pending) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_use_dma_rx(port)) { + /* + * PDC receive. Just schedule the tasklet and let it + * figure out the details. + * + * TODO: We're not handling error flags correctly at + * the moment. + */ + if (pending & (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)) { + UART_PUT_IDR(port, (ATMEL_US_ENDRX + | ATMEL_US_TIMEOUT)); + tasklet_schedule(&atmel_port->tasklet); + } + + if (pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | + ATMEL_US_FRAME | ATMEL_US_PARE)) + atmel_pdc_rxerr(port, pending); + } + + /* Interrupt receive */ + if (pending & ATMEL_US_RXRDY) + atmel_rx_chars(port); + else if (pending & ATMEL_US_RXBRK) { + /* + * End of break detected. If it came along with a + * character, atmel_rx_chars will handle it. + */ + UART_PUT_CR(port, ATMEL_US_RSTSTA); + UART_PUT_IDR(port, ATMEL_US_RXBRK); + atmel_port->break_active = 0; + } +} + +/* + * transmit interrupt handler. (Transmit is IRQF_NODELAY safe) + */ +static void +atmel_handle_transmit(struct uart_port *port, unsigned int pending) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (pending & atmel_port->tx_done_mask) { + /* Either PDC or interrupt transmission */ + UART_PUT_IDR(port, atmel_port->tx_done_mask); + tasklet_schedule(&atmel_port->tasklet); + } +} + +/* + * status flags interrupt handler. + */ +static void +atmel_handle_status(struct uart_port *port, unsigned int pending, + unsigned int status) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC + | ATMEL_US_CTSIC)) { + atmel_port->irq_status = status; + tasklet_schedule(&atmel_port->tasklet); + } +} + +/* + * Interrupt handler + */ +static irqreturn_t atmel_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned int status, pending, pass_counter = 0; + + do { + status = UART_GET_CSR(port); + pending = status & UART_GET_IMR(port); + if (!pending) + break; + + atmel_handle_receive(port, pending); + atmel_handle_status(port, pending, status); + atmel_handle_transmit(port, pending); + } while (pass_counter++ < ATMEL_ISR_PASS_LIMIT); + + return pass_counter ? IRQ_HANDLED : IRQ_NONE; +} + +/* + * Called from tasklet with ENDTX and TXBUFE interrupts disabled. + */ +static void atmel_tx_dma(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct circ_buf *xmit = &port->state->xmit; + struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; + int count; + + /* nothing left to transmit? */ + if (UART_GET_TCR(port)) + return; + + xmit->tail += pdc->ofs; + xmit->tail &= UART_XMIT_SIZE - 1; + + port->icount.tx += pdc->ofs; + pdc->ofs = 0; + + /* more to transmit - setup next transfer */ + + /* disable PDC transmit */ + UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); + + if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) { + dma_sync_single_for_device(port->dev, + pdc->dma_addr, + pdc->dma_size, + DMA_TO_DEVICE); + + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + pdc->ofs = count; + + UART_PUT_TPR(port, pdc->dma_addr + xmit->tail); + UART_PUT_TCR(port, count); + /* re-enable PDC transmit */ + UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); + /* Enable interrupts */ + UART_PUT_IER(port, atmel_port->tx_done_mask); + } else { + if (atmel_port->rs485.flags & SER_RS485_ENABLED) { + /* DMA done, stop TX, start RX for RS485 */ + atmel_start_rx(port); + } + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void atmel_rx_from_ring(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct circ_buf *ring = &atmel_port->rx_ring; + unsigned int flg; + unsigned int status; + + while (ring->head != ring->tail) { + struct atmel_uart_char c; + + /* Make sure c is loaded after head. */ + smp_rmb(); + + c = ((struct atmel_uart_char *)ring->buf)[ring->tail]; + + ring->tail = (ring->tail + 1) & (ATMEL_SERIAL_RINGSIZE - 1); + + port->icount.rx++; + status = c.status; + flg = TTY_NORMAL; + + /* + * note that the error handling code is + * out of the main execution path + */ + if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME + | ATMEL_US_OVRE | ATMEL_US_RXBRK))) { + if (status & ATMEL_US_RXBRK) { + /* ignore side-effect */ + status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME); + + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } + if (status & ATMEL_US_PARE) + port->icount.parity++; + if (status & ATMEL_US_FRAME) + port->icount.frame++; + if (status & ATMEL_US_OVRE) + port->icount.overrun++; + + status &= port->read_status_mask; + + if (status & ATMEL_US_RXBRK) + flg = TTY_BREAK; + else if (status & ATMEL_US_PARE) + flg = TTY_PARITY; + else if (status & ATMEL_US_FRAME) + flg = TTY_FRAME; + } + + + if (uart_handle_sysrq_char(port, c.ch)) + continue; + + uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg); + } + + /* + * Drop the lock here since it might end up calling + * uart_start(), which takes the lock. + */ + spin_unlock(&port->lock); + tty_flip_buffer_push(port->state->port.tty); + spin_lock(&port->lock); +} + +static void atmel_rx_from_dma(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct tty_struct *tty = port->state->port.tty; + struct atmel_dma_buffer *pdc; + int rx_idx = atmel_port->pdc_rx_idx; + unsigned int head; + unsigned int tail; + unsigned int count; + + do { + /* Reset the UART timeout early so that we don't miss one */ + UART_PUT_CR(port, ATMEL_US_STTTO); + + pdc = &atmel_port->pdc_rx[rx_idx]; + head = UART_GET_RPR(port) - pdc->dma_addr; + tail = pdc->ofs; + + /* If the PDC has switched buffers, RPR won't contain + * any address within the current buffer. Since head + * is unsigned, we just need a one-way comparison to + * find out. + * + * In this case, we just need to consume the entire + * buffer and resubmit it for DMA. This will clear the + * ENDRX bit as well, so that we can safely re-enable + * all interrupts below. + */ + head = min(head, pdc->dma_size); + + if (likely(head != tail)) { + dma_sync_single_for_cpu(port->dev, pdc->dma_addr, + pdc->dma_size, DMA_FROM_DEVICE); + + /* + * head will only wrap around when we recycle + * the DMA buffer, and when that happens, we + * explicitly set tail to 0. So head will + * always be greater than tail. + */ + count = head - tail; + + tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count); + + dma_sync_single_for_device(port->dev, pdc->dma_addr, + pdc->dma_size, DMA_FROM_DEVICE); + + port->icount.rx += count; + pdc->ofs = head; + } + + /* + * If the current buffer is full, we need to check if + * the next one contains any additional data. + */ + if (head >= pdc->dma_size) { + pdc->ofs = 0; + UART_PUT_RNPR(port, pdc->dma_addr); + UART_PUT_RNCR(port, pdc->dma_size); + + rx_idx = !rx_idx; + atmel_port->pdc_rx_idx = rx_idx; + } + } while (head >= pdc->dma_size); + + /* + * Drop the lock here since it might end up calling + * uart_start(), which takes the lock. + */ + spin_unlock(&port->lock); + tty_flip_buffer_push(tty); + spin_lock(&port->lock); + + UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); +} + +/* + * tasklet handling tty stuff outside the interrupt handler. + */ +static void atmel_tasklet_func(unsigned long data) +{ + struct uart_port *port = (struct uart_port *)data; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int status; + unsigned int status_change; + + /* The interrupt handler does not take the lock */ + spin_lock(&port->lock); + + if (atmel_use_dma_tx(port)) + atmel_tx_dma(port); + else + atmel_tx_chars(port); + + status = atmel_port->irq_status; + status_change = status ^ atmel_port->irq_status_prev; + + if (status_change & (ATMEL_US_RI | ATMEL_US_DSR + | ATMEL_US_DCD | ATMEL_US_CTS)) { + /* TODO: All reads to CSR will clear these interrupts! */ + if (status_change & ATMEL_US_RI) + port->icount.rng++; + if (status_change & ATMEL_US_DSR) + port->icount.dsr++; + if (status_change & ATMEL_US_DCD) + uart_handle_dcd_change(port, !(status & ATMEL_US_DCD)); + if (status_change & ATMEL_US_CTS) + uart_handle_cts_change(port, !(status & ATMEL_US_CTS)); + + wake_up_interruptible(&port->state->port.delta_msr_wait); + + atmel_port->irq_status_prev = status; + } + + if (atmel_use_dma_rx(port)) + atmel_rx_from_dma(port); + else + atmel_rx_from_ring(port); + + spin_unlock(&port->lock); +} + +/* + * Perform initialization and enable port for reception + */ +static int atmel_startup(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct tty_struct *tty = port->state->port.tty; + int retval; + + /* + * Ensure that no interrupts are enabled otherwise when + * request_irq() is called we could get stuck trying to + * handle an unexpected interrupt + */ + UART_PUT_IDR(port, -1); + + /* + * Allocate the IRQ + */ + retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED, + tty ? tty->name : "atmel_serial", port); + if (retval) { + printk("atmel_serial: atmel_startup - Can't get irq\n"); + return retval; + } + + /* + * Initialize DMA (if necessary) + */ + if (atmel_use_dma_rx(port)) { + int i; + + for (i = 0; i < 2; i++) { + struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; + + pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL); + if (pdc->buf == NULL) { + if (i != 0) { + dma_unmap_single(port->dev, + atmel_port->pdc_rx[0].dma_addr, + PDC_BUFFER_SIZE, + DMA_FROM_DEVICE); + kfree(atmel_port->pdc_rx[0].buf); + } + free_irq(port->irq, port); + return -ENOMEM; + } + pdc->dma_addr = dma_map_single(port->dev, + pdc->buf, + PDC_BUFFER_SIZE, + DMA_FROM_DEVICE); + pdc->dma_size = PDC_BUFFER_SIZE; + pdc->ofs = 0; + } + + atmel_port->pdc_rx_idx = 0; + + UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr); + UART_PUT_RCR(port, PDC_BUFFER_SIZE); + + UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr); + UART_PUT_RNCR(port, PDC_BUFFER_SIZE); + } + if (atmel_use_dma_tx(port)) { + struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; + struct circ_buf *xmit = &port->state->xmit; + + pdc->buf = xmit->buf; + pdc->dma_addr = dma_map_single(port->dev, + pdc->buf, + UART_XMIT_SIZE, + DMA_TO_DEVICE); + pdc->dma_size = UART_XMIT_SIZE; + pdc->ofs = 0; + } + + /* + * If there is a specific "open" function (to register + * control line interrupts) + */ + if (atmel_open_hook) { + retval = atmel_open_hook(port); + if (retval) { + free_irq(port->irq, port); + return retval; + } + } + + /* Save current CSR for comparison in atmel_tasklet_func() */ + atmel_port->irq_status_prev = UART_GET_CSR(port); + atmel_port->irq_status = atmel_port->irq_status_prev; + + /* + * Finally, enable the serial port + */ + UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); + /* enable xmit & rcvr */ + UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); + + if (atmel_use_dma_rx(port)) { + /* set UART timeout */ + UART_PUT_RTOR(port, PDC_RX_TIMEOUT); + UART_PUT_CR(port, ATMEL_US_STTTO); + + UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT); + /* enable PDC controller */ + UART_PUT_PTCR(port, ATMEL_PDC_RXTEN); + } else { + /* enable receive only */ + UART_PUT_IER(port, ATMEL_US_RXRDY); + } + + return 0; +} + +/* + * Disable the port + */ +static void atmel_shutdown(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + /* + * Ensure everything is stopped. + */ + atmel_stop_rx(port); + atmel_stop_tx(port); + + /* + * Shut-down the DMA. + */ + if (atmel_use_dma_rx(port)) { + int i; + + for (i = 0; i < 2; i++) { + struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i]; + + dma_unmap_single(port->dev, + pdc->dma_addr, + pdc->dma_size, + DMA_FROM_DEVICE); + kfree(pdc->buf); + } + } + if (atmel_use_dma_tx(port)) { + struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx; + + dma_unmap_single(port->dev, + pdc->dma_addr, + pdc->dma_size, + DMA_TO_DEVICE); + } + + /* + * Disable all interrupts, port and break condition. + */ + UART_PUT_CR(port, ATMEL_US_RSTSTA); + UART_PUT_IDR(port, -1); + + /* + * Free the interrupt + */ + free_irq(port->irq, port); + + /* + * If there is a specific "close" function (to unregister + * control line interrupts) + */ + if (atmel_close_hook) + atmel_close_hook(port); +} + +/* + * Flush any TX data submitted for DMA. Called when the TX circular + * buffer is reset. + */ +static void atmel_flush_buffer(struct uart_port *port) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_use_dma_tx(port)) { + UART_PUT_TCR(port, 0); + atmel_port->pdc_tx.ofs = 0; + } +} + +/* + * Power / Clock management. + */ +static void atmel_serial_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + switch (state) { + case 0: + /* + * Enable the peripheral clock for this serial port. + * This is called on uart_open() or a resume event. + */ + clk_enable(atmel_port->clk); + + /* re-enable interrupts if we disabled some on suspend */ + UART_PUT_IER(port, atmel_port->backup_imr); + break; + case 3: + /* Back up the interrupt mask and disable all interrupts */ + atmel_port->backup_imr = UART_GET_IMR(port); + UART_PUT_IDR(port, -1); + + /* + * Disable the peripheral clock for this serial port. + * This is called on uart_close() or a suspend event. + */ + clk_disable(atmel_port->clk); + break; + default: + printk(KERN_ERR "atmel_serial: unknown pm %d\n", state); + } +} + +/* + * Change the port parameters + */ +static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int mode, imr, quot, baud; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + /* Get current mode register */ + mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL + | ATMEL_US_NBSTOP | ATMEL_US_PAR + | ATMEL_US_USMODE); + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + quot = uart_get_divisor(port, baud); + + if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */ + quot /= 8; + mode |= ATMEL_US_USCLKS_MCK_DIV8; + } + + /* byte size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + mode |= ATMEL_US_CHRL_5; + break; + case CS6: + mode |= ATMEL_US_CHRL_6; + break; + case CS7: + mode |= ATMEL_US_CHRL_7; + break; + default: + mode |= ATMEL_US_CHRL_8; + break; + } + + /* stop bits */ + if (termios->c_cflag & CSTOPB) + mode |= ATMEL_US_NBSTOP_2; + + /* parity */ + if (termios->c_cflag & PARENB) { + /* Mark or Space parity */ + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + mode |= ATMEL_US_PAR_MARK; + else + mode |= ATMEL_US_PAR_SPACE; + } else if (termios->c_cflag & PARODD) + mode |= ATMEL_US_PAR_ODD; + else + mode |= ATMEL_US_PAR_EVEN; + } else + mode |= ATMEL_US_PAR_NONE; + + /* hardware handshake (RTS/CTS) */ + if (termios->c_cflag & CRTSCTS) + mode |= ATMEL_US_USMODE_HWHS; + else + mode |= ATMEL_US_USMODE_NORMAL; + + spin_lock_irqsave(&port->lock, flags); + + port->read_status_mask = ATMEL_US_OVRE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE); + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= ATMEL_US_RXBRK; + + if (atmel_use_dma_rx(port)) + /* need to enable error interrupts */ + UART_PUT_IER(port, port->read_status_mask); + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE); + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= ATMEL_US_RXBRK; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= ATMEL_US_OVRE; + } + /* TODO: Ignore all characters if CREAD is set.*/ + + /* update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * save/disable interrupts. The tty layer will ensure that the + * transmitter is empty if requested by the caller, so there's + * no need to wait for it here. + */ + imr = UART_GET_IMR(port); + UART_PUT_IDR(port, -1); + + /* disable receiver and transmitter */ + UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS); + + /* Resetting serial mode to RS232 (0x0) */ + mode &= ~ATMEL_US_USMODE; + + if (atmel_port->rs485.flags & SER_RS485_ENABLED) { + dev_dbg(port->dev, "Setting UART to RS485\n"); + if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND) + UART_PUT_TTGR(port, + atmel_port->rs485.delay_rts_after_send); + mode |= ATMEL_US_USMODE_RS485; + } else { + dev_dbg(port->dev, "Setting UART to RS232\n"); + } + + /* set the parity, stop bits and data size */ + UART_PUT_MR(port, mode); + + /* set the baud rate */ + UART_PUT_BRGR(port, quot); + UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); + UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); + + /* restore interrupts */ + UART_PUT_IER(port, imr); + + /* CTS flow-control and modem-status interrupts */ + if (UART_ENABLE_MS(port, termios->c_cflag)) + port->ops->enable_ms(port); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * Return string describing the specified port + */ +static const char *atmel_type(struct uart_port *port) +{ + return (port->type == PORT_ATMEL) ? "ATMEL_SERIAL" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void atmel_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + int size = pdev->resource[0].end - pdev->resource[0].start + 1; + + release_mem_region(port->mapbase, size); + + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int atmel_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + int size = pdev->resource[0].end - pdev->resource[0].start + 1; + + if (!request_mem_region(port->mapbase, size, "atmel_serial")) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap(port->mapbase, size); + if (port->membase == NULL) { + release_mem_region(port->mapbase, size); + return -ENOMEM; + } + } + + return 0; +} + +/* + * Configure/autoconfigure the port. + */ +static void atmel_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_ATMEL; + atmel_request_port(port); + } +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + */ +static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_ATMEL) + ret = -EINVAL; + if (port->irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != SERIAL_IO_MEM) + ret = -EINVAL; + if (port->uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if ((void *)port->mapbase != ser->iomem_base) + ret = -EINVAL; + if (port->iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +#ifdef CONFIG_CONSOLE_POLL +static int atmel_poll_get_char(struct uart_port *port) +{ + while (!(UART_GET_CSR(port) & ATMEL_US_RXRDY)) + cpu_relax(); + + return UART_GET_CHAR(port); +} + +static void atmel_poll_put_char(struct uart_port *port, unsigned char ch) +{ + while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY)) + cpu_relax(); + + UART_PUT_CHAR(port, ch); +} +#endif + +static int +atmel_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg) +{ + struct serial_rs485 rs485conf; + + switch (cmd) { + case TIOCSRS485: + if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg, + sizeof(rs485conf))) + return -EFAULT; + + atmel_config_rs485(port, &rs485conf); + break; + + case TIOCGRS485: + if (copy_to_user((struct serial_rs485 *) arg, + &(to_atmel_uart_port(port)->rs485), + sizeof(rs485conf))) + return -EFAULT; + break; + + default: + return -ENOIOCTLCMD; + } + return 0; +} + + + +static struct uart_ops atmel_pops = { + .tx_empty = atmel_tx_empty, + .set_mctrl = atmel_set_mctrl, + .get_mctrl = atmel_get_mctrl, + .stop_tx = atmel_stop_tx, + .start_tx = atmel_start_tx, + .stop_rx = atmel_stop_rx, + .enable_ms = atmel_enable_ms, + .break_ctl = atmel_break_ctl, + .startup = atmel_startup, + .shutdown = atmel_shutdown, + .flush_buffer = atmel_flush_buffer, + .set_termios = atmel_set_termios, + .type = atmel_type, + .release_port = atmel_release_port, + .request_port = atmel_request_port, + .config_port = atmel_config_port, + .verify_port = atmel_verify_port, + .pm = atmel_serial_pm, + .ioctl = atmel_ioctl, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = atmel_poll_get_char, + .poll_put_char = atmel_poll_put_char, +#endif +}; + +/* + * Configure the port from the platform device resource info. + */ +static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, + struct platform_device *pdev) +{ + struct uart_port *port = &atmel_port->uart; + struct atmel_uart_data *data = pdev->dev.platform_data; + + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF; + port->ops = &atmel_pops; + port->fifosize = 1; + port->line = pdev->id; + port->dev = &pdev->dev; + port->mapbase = pdev->resource[0].start; + port->irq = pdev->resource[1].start; + + tasklet_init(&atmel_port->tasklet, atmel_tasklet_func, + (unsigned long)port); + + memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring)); + + if (data->regs) + /* Already mapped by setup code */ + port->membase = data->regs; + else { + port->flags |= UPF_IOREMAP; + port->membase = NULL; + } + + /* for console, the clock could already be configured */ + if (!atmel_port->clk) { + atmel_port->clk = clk_get(&pdev->dev, "usart"); + clk_enable(atmel_port->clk); + port->uartclk = clk_get_rate(atmel_port->clk); + clk_disable(atmel_port->clk); + /* only enable clock when USART is in use */ + } + + atmel_port->use_dma_rx = data->use_dma_rx; + atmel_port->use_dma_tx = data->use_dma_tx; + atmel_port->rs485 = data->rs485; + /* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */ + if (atmel_port->rs485.flags & SER_RS485_ENABLED) + atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; + else if (atmel_use_dma_tx(port)) { + port->fifosize = PDC_BUFFER_SIZE; + atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE; + } else { + atmel_port->tx_done_mask = ATMEL_US_TXRDY; + } +} + +/* + * Register board-specific modem-control line handlers. + */ +void __init atmel_register_uart_fns(struct atmel_port_fns *fns) +{ + if (fns->enable_ms) + atmel_pops.enable_ms = fns->enable_ms; + if (fns->get_mctrl) + atmel_pops.get_mctrl = fns->get_mctrl; + if (fns->set_mctrl) + atmel_pops.set_mctrl = fns->set_mctrl; + atmel_open_hook = fns->open; + atmel_close_hook = fns->close; + atmel_pops.pm = fns->pm; + atmel_pops.set_wake = fns->set_wake; +} + +#ifdef CONFIG_SERIAL_ATMEL_CONSOLE +static void atmel_console_putchar(struct uart_port *port, int ch) +{ + while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY)) + cpu_relax(); + UART_PUT_CHAR(port, ch); +} + +/* + * Interrupts are disabled on entering + */ +static void atmel_console_write(struct console *co, const char *s, u_int count) +{ + struct uart_port *port = &atmel_ports[co->index].uart; + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + unsigned int status, imr; + unsigned int pdc_tx; + + /* + * First, save IMR and then disable interrupts + */ + imr = UART_GET_IMR(port); + UART_PUT_IDR(port, ATMEL_US_RXRDY | atmel_port->tx_done_mask); + + /* Store PDC transmit status and disable it */ + pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN; + UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS); + + uart_console_write(port, s, count, atmel_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore IMR + */ + do { + status = UART_GET_CSR(port); + } while (!(status & ATMEL_US_TXRDY)); + + /* Restore PDC transmit status */ + if (pdc_tx) + UART_PUT_PTCR(port, ATMEL_PDC_TXTEN); + + /* set interrupts back the way they were */ + UART_PUT_IER(port, imr); +} + +/* + * If the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init atmel_console_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + unsigned int mr, quot; + + /* + * If the baud rate generator isn't running, the port wasn't + * initialized by the boot loader. + */ + quot = UART_GET_BRGR(port) & ATMEL_US_CD; + if (!quot) + return; + + mr = UART_GET_MR(port) & ATMEL_US_CHRL; + if (mr == ATMEL_US_CHRL_8) + *bits = 8; + else + *bits = 7; + + mr = UART_GET_MR(port) & ATMEL_US_PAR; + if (mr == ATMEL_US_PAR_EVEN) + *parity = 'e'; + else if (mr == ATMEL_US_PAR_ODD) + *parity = 'o'; + + /* + * The serial core only rounds down when matching this to a + * supported baud rate. Make sure we don't end up slightly + * lower than one of those, as it would make us fall through + * to a much lower baud rate than we really want. + */ + *baud = port->uartclk / (16 * (quot - 1)); +} + +static int __init atmel_console_setup(struct console *co, char *options) +{ + struct uart_port *port = &atmel_ports[co->index].uart; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (port->membase == NULL) { + /* Port not initialized yet - delay setup */ + return -ENODEV; + } + + clk_enable(atmel_ports[co->index].clk); + + UART_PUT_IDR(port, -1); + UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); + UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + atmel_console_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver atmel_uart; + +static struct console atmel_console = { + .name = ATMEL_DEVICENAME, + .write = atmel_console_write, + .device = uart_console_device, + .setup = atmel_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &atmel_uart, +}; + +#define ATMEL_CONSOLE_DEVICE (&atmel_console) + +/* + * Early console initialization (before VM subsystem initialized). + */ +static int __init atmel_console_init(void) +{ + if (atmel_default_console_device) { + add_preferred_console(ATMEL_DEVICENAME, + atmel_default_console_device->id, NULL); + atmel_init_port(&atmel_ports[atmel_default_console_device->id], + atmel_default_console_device); + register_console(&atmel_console); + } + + return 0; +} + +console_initcall(atmel_console_init); + +/* + * Late console initialization. + */ +static int __init atmel_late_console_init(void) +{ + if (atmel_default_console_device + && !(atmel_console.flags & CON_ENABLED)) + register_console(&atmel_console); + + return 0; +} + +core_initcall(atmel_late_console_init); + +static inline bool atmel_is_console_port(struct uart_port *port) +{ + return port->cons && port->cons->index == port->line; +} + +#else +#define ATMEL_CONSOLE_DEVICE NULL + +static inline bool atmel_is_console_port(struct uart_port *port) +{ + return false; +} +#endif + +static struct uart_driver atmel_uart = { + .owner = THIS_MODULE, + .driver_name = "atmel_serial", + .dev_name = ATMEL_DEVICENAME, + .major = SERIAL_ATMEL_MAJOR, + .minor = MINOR_START, + .nr = ATMEL_MAX_UART, + .cons = ATMEL_CONSOLE_DEVICE, +}; + +#ifdef CONFIG_PM +static bool atmel_serial_clk_will_stop(void) +{ +#ifdef CONFIG_ARCH_AT91 + return at91_suspend_entering_slow_clock(); +#else + return false; +#endif +} + +static int atmel_serial_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + if (atmel_is_console_port(port) && console_suspend_enabled) { + /* Drain the TX shifter */ + while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY)) + cpu_relax(); + } + + /* we can not wake up if we're running on slow clock */ + atmel_port->may_wakeup = device_may_wakeup(&pdev->dev); + if (atmel_serial_clk_will_stop()) + device_set_wakeup_enable(&pdev->dev, 0); + + uart_suspend_port(&atmel_uart, port); + + return 0; +} + +static int atmel_serial_resume(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + + uart_resume_port(&atmel_uart, port); + device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup); + + return 0; +} +#else +#define atmel_serial_suspend NULL +#define atmel_serial_resume NULL +#endif + +static int __devinit atmel_serial_probe(struct platform_device *pdev) +{ + struct atmel_uart_port *port; + void *data; + int ret; + + BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); + + port = &atmel_ports[pdev->id]; + port->backup_imr = 0; + + atmel_init_port(port, pdev); + + if (!atmel_use_dma_rx(&port->uart)) { + ret = -ENOMEM; + data = kmalloc(sizeof(struct atmel_uart_char) + * ATMEL_SERIAL_RINGSIZE, GFP_KERNEL); + if (!data) + goto err_alloc_ring; + port->rx_ring.buf = data; + } + + ret = uart_add_one_port(&atmel_uart, &port->uart); + if (ret) + goto err_add_port; + +#ifdef CONFIG_SERIAL_ATMEL_CONSOLE + if (atmel_is_console_port(&port->uart) + && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) { + /* + * The serial core enabled the clock for us, so undo + * the clk_enable() in atmel_console_setup() + */ + clk_disable(port->clk); + } +#endif + + device_init_wakeup(&pdev->dev, 1); + platform_set_drvdata(pdev, port); + + return 0; + +err_add_port: + kfree(port->rx_ring.buf); + port->rx_ring.buf = NULL; +err_alloc_ring: + if (!atmel_is_console_port(&port->uart)) { + clk_put(port->clk); + port->clk = NULL; + } + + return ret; +} + +static int __devexit atmel_serial_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + int ret = 0; + + device_init_wakeup(&pdev->dev, 0); + platform_set_drvdata(pdev, NULL); + + ret = uart_remove_one_port(&atmel_uart, port); + + tasklet_kill(&atmel_port->tasklet); + kfree(atmel_port->rx_ring.buf); + + /* "port" is allocated statically, so we shouldn't free it */ + + clk_put(atmel_port->clk); + + return ret; +} + +static struct platform_driver atmel_serial_driver = { + .probe = atmel_serial_probe, + .remove = __devexit_p(atmel_serial_remove), + .suspend = atmel_serial_suspend, + .resume = atmel_serial_resume, + .driver = { + .name = "atmel_usart", + .owner = THIS_MODULE, + }, +}; + +static int __init atmel_serial_init(void) +{ + int ret; + + ret = uart_register_driver(&atmel_uart); + if (ret) + return ret; + + ret = platform_driver_register(&atmel_serial_driver); + if (ret) + uart_unregister_driver(&atmel_uart); + + return ret; +} + +static void __exit atmel_serial_exit(void) +{ + platform_driver_unregister(&atmel_serial_driver); + uart_unregister_driver(&atmel_uart); +} + +module_init(atmel_serial_init); +module_exit(atmel_serial_exit); + +MODULE_AUTHOR("Rick Bronson"); +MODULE_DESCRIPTION("Atmel AT91 / AT32 serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:atmel_usart"); diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c new file mode 100644 index 000000000000..a1a0e55d0807 --- /dev/null +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -0,0 +1,891 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Derived from many drivers using generic_serial interface. + * + * Copyright (C) 2008 Maxime Bizon + * + * Serial driver for BCM63xx integrated UART. + * + * Hardware flow control was _not_ tested since I only have RX/TX on + * my board. + */ + +#if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define BCM63XX_NR_UARTS 2 + +static struct uart_port ports[BCM63XX_NR_UARTS]; + +/* + * rx interrupt mask / stat + * + * mask: + * - rx fifo full + * - rx fifo above threshold + * - rx fifo not empty for too long + */ +#define UART_RX_INT_MASK (UART_IR_MASK(UART_IR_RXOVER) | \ + UART_IR_MASK(UART_IR_RXTHRESH) | \ + UART_IR_MASK(UART_IR_RXTIMEOUT)) + +#define UART_RX_INT_STAT (UART_IR_STAT(UART_IR_RXOVER) | \ + UART_IR_STAT(UART_IR_RXTHRESH) | \ + UART_IR_STAT(UART_IR_RXTIMEOUT)) + +/* + * tx interrupt mask / stat + * + * mask: + * - tx fifo empty + * - tx fifo below threshold + */ +#define UART_TX_INT_MASK (UART_IR_MASK(UART_IR_TXEMPTY) | \ + UART_IR_MASK(UART_IR_TXTRESH)) + +#define UART_TX_INT_STAT (UART_IR_STAT(UART_IR_TXEMPTY) | \ + UART_IR_STAT(UART_IR_TXTRESH)) + +/* + * external input interrupt + * + * mask: any edge on CTS, DCD + */ +#define UART_EXTINP_INT_MASK (UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \ + UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD)) + +/* + * handy uart register accessor + */ +static inline unsigned int bcm_uart_readl(struct uart_port *port, + unsigned int offset) +{ + return bcm_readl(port->membase + offset); +} + +static inline void bcm_uart_writel(struct uart_port *port, + unsigned int value, unsigned int offset) +{ + bcm_writel(value, port->membase + offset); +} + +/* + * serial core request to check if uart tx fifo is empty + */ +static unsigned int bcm_uart_tx_empty(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0; +} + +/* + * serial core request to set RTS and DTR pin state and loopback mode + */ +static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_MCTL_REG); + val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK); + /* invert of written value is reflected on the pin */ + if (!(mctrl & TIOCM_DTR)) + val |= UART_MCTL_DTR_MASK; + if (!(mctrl & TIOCM_RTS)) + val |= UART_MCTL_RTS_MASK; + bcm_uart_writel(port, val, UART_MCTL_REG); + + val = bcm_uart_readl(port, UART_CTL_REG); + if (mctrl & TIOCM_LOOP) + val |= UART_CTL_LOOPBACK_MASK; + else + val &= ~UART_CTL_LOOPBACK_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); +} + +/* + * serial core request to return RI, CTS, DCD and DSR pin state + */ +static unsigned int bcm_uart_get_mctrl(struct uart_port *port) +{ + unsigned int val, mctrl; + + mctrl = 0; + val = bcm_uart_readl(port, UART_EXTINP_REG); + if (val & UART_EXTINP_RI_MASK) + mctrl |= TIOCM_RI; + if (val & UART_EXTINP_CTS_MASK) + mctrl |= TIOCM_CTS; + if (val & UART_EXTINP_DCD_MASK) + mctrl |= TIOCM_CD; + if (val & UART_EXTINP_DSR_MASK) + mctrl |= TIOCM_DSR; + return mctrl; +} + +/* + * serial core request to disable tx ASAP (used for flow control) + */ +static void bcm_uart_stop_tx(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_CTL_REG); + val &= ~(UART_CTL_TXEN_MASK); + bcm_uart_writel(port, val, UART_CTL_REG); + + val = bcm_uart_readl(port, UART_IR_REG); + val &= ~UART_TX_INT_MASK; + bcm_uart_writel(port, val, UART_IR_REG); +} + +/* + * serial core request to (re)enable tx + */ +static void bcm_uart_start_tx(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + val |= UART_TX_INT_MASK; + bcm_uart_writel(port, val, UART_IR_REG); + + val = bcm_uart_readl(port, UART_CTL_REG); + val |= UART_CTL_TXEN_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); +} + +/* + * serial core request to stop rx, called before port shutdown + */ +static void bcm_uart_stop_rx(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + val &= ~UART_RX_INT_MASK; + bcm_uart_writel(port, val, UART_IR_REG); +} + +/* + * serial core request to enable modem status interrupt reporting + */ +static void bcm_uart_enable_ms(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + val |= UART_IR_MASK(UART_IR_EXTIP); + bcm_uart_writel(port, val, UART_IR_REG); +} + +/* + * serial core request to start/stop emitting break char + */ +static void bcm_uart_break_ctl(struct uart_port *port, int ctl) +{ + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&port->lock, flags); + + val = bcm_uart_readl(port, UART_CTL_REG); + if (ctl) + val |= UART_CTL_XMITBRK_MASK; + else + val &= ~UART_CTL_XMITBRK_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * return port type in string format + */ +static const char *bcm_uart_type(struct uart_port *port) +{ + return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL; +} + +/* + * read all chars in rx fifo and send them to core + */ +static void bcm_uart_do_rx(struct uart_port *port) +{ + struct tty_struct *tty; + unsigned int max_count; + + /* limit number of char read in interrupt, should not be + * higher than fifo size anyway since we're much faster than + * serial port */ + max_count = 32; + tty = port->state->port.tty; + do { + unsigned int iestat, c, cstat; + char flag; + + /* get overrun/fifo empty information from ier + * register */ + iestat = bcm_uart_readl(port, UART_IR_REG); + if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY))) + break; + + cstat = c = bcm_uart_readl(port, UART_FIFO_REG); + port->icount.rx++; + flag = TTY_NORMAL; + c &= 0xff; + + if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) { + /* do stats first */ + if (cstat & UART_FIFO_BRKDET_MASK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } + + if (cstat & UART_FIFO_PARERR_MASK) + port->icount.parity++; + if (cstat & UART_FIFO_FRAMEERR_MASK) + port->icount.frame++; + + /* update flag wrt read_status_mask */ + cstat &= port->read_status_mask; + if (cstat & UART_FIFO_BRKDET_MASK) + flag = TTY_BREAK; + if (cstat & UART_FIFO_FRAMEERR_MASK) + flag = TTY_FRAME; + if (cstat & UART_FIFO_PARERR_MASK) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(port, c)) + continue; + + if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) { + port->icount.overrun++; + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + + if ((cstat & port->ignore_status_mask) == 0) + tty_insert_flip_char(tty, c, flag); + + } while (--max_count); + + tty_flip_buffer_push(tty); +} + +/* + * fill tx fifo with chars to send, stop when fifo is about to be full + * or when all chars have been sent. + */ +static void bcm_uart_do_tx(struct uart_port *port) +{ + struct circ_buf *xmit; + unsigned int val, max_count; + + if (port->x_char) { + bcm_uart_writel(port, port->x_char, UART_FIFO_REG); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_tx_stopped(port)) { + bcm_uart_stop_tx(port); + return; + } + + xmit = &port->state->xmit; + if (uart_circ_empty(xmit)) + goto txq_empty; + + val = bcm_uart_readl(port, UART_MCTL_REG); + val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT; + max_count = port->fifosize - val; + + while (max_count--) { + unsigned int c; + + c = xmit->buf[xmit->tail]; + bcm_uart_writel(port, c, UART_FIFO_REG); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + goto txq_empty; + return; + +txq_empty: + /* nothing to send, disable transmit interrupt */ + val = bcm_uart_readl(port, UART_IR_REG); + val &= ~UART_TX_INT_MASK; + bcm_uart_writel(port, val, UART_IR_REG); + return; +} + +/* + * process uart interrupt + */ +static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id) +{ + struct uart_port *port; + unsigned int irqstat; + + port = dev_id; + spin_lock(&port->lock); + + irqstat = bcm_uart_readl(port, UART_IR_REG); + if (irqstat & UART_RX_INT_STAT) + bcm_uart_do_rx(port); + + if (irqstat & UART_TX_INT_STAT) + bcm_uart_do_tx(port); + + if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) { + unsigned int estat; + + estat = bcm_uart_readl(port, UART_EXTINP_REG); + if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS)) + uart_handle_cts_change(port, + estat & UART_EXTINP_CTS_MASK); + if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD)) + uart_handle_dcd_change(port, + estat & UART_EXTINP_DCD_MASK); + } + + spin_unlock(&port->lock); + return IRQ_HANDLED; +} + +/* + * enable rx & tx operation on uart + */ +static void bcm_uart_enable(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_CTL_REG); + val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); + bcm_uart_writel(port, val, UART_CTL_REG); +} + +/* + * disable rx & tx operation on uart + */ +static void bcm_uart_disable(struct uart_port *port) +{ + unsigned int val; + + val = bcm_uart_readl(port, UART_CTL_REG); + val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | + UART_CTL_RXEN_MASK); + bcm_uart_writel(port, val, UART_CTL_REG); +} + +/* + * clear all unread data in rx fifo and unsent data in tx fifo + */ +static void bcm_uart_flush(struct uart_port *port) +{ + unsigned int val; + + /* empty rx and tx fifo */ + val = bcm_uart_readl(port, UART_CTL_REG); + val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); + + /* read any pending char to make sure all irq status are + * cleared */ + (void)bcm_uart_readl(port, UART_FIFO_REG); +} + +/* + * serial core request to initialize uart and start rx operation + */ +static int bcm_uart_startup(struct uart_port *port) +{ + unsigned int val; + int ret; + + /* mask all irq and flush port */ + bcm_uart_disable(port); + bcm_uart_writel(port, 0, UART_IR_REG); + bcm_uart_flush(port); + + /* clear any pending external input interrupt */ + (void)bcm_uart_readl(port, UART_EXTINP_REG); + + /* set rx/tx fifo thresh to fifo half size */ + val = bcm_uart_readl(port, UART_MCTL_REG); + val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK); + val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT; + val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT; + bcm_uart_writel(port, val, UART_MCTL_REG); + + /* set rx fifo timeout to 1 char time */ + val = bcm_uart_readl(port, UART_CTL_REG); + val &= ~UART_CTL_RXTMOUTCNT_MASK; + val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT; + bcm_uart_writel(port, val, UART_CTL_REG); + + /* report any edge on dcd and cts */ + val = UART_EXTINP_INT_MASK; + val |= UART_EXTINP_DCD_NOSENSE_MASK; + val |= UART_EXTINP_CTS_NOSENSE_MASK; + bcm_uart_writel(port, val, UART_EXTINP_REG); + + /* register irq and enable rx interrupts */ + ret = request_irq(port->irq, bcm_uart_interrupt, 0, + bcm_uart_type(port), port); + if (ret) + return ret; + bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG); + bcm_uart_enable(port); + return 0; +} + +/* + * serial core request to flush & disable uart + */ +static void bcm_uart_shutdown(struct uart_port *port) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + bcm_uart_writel(port, 0, UART_IR_REG); + spin_unlock_irqrestore(&port->lock, flags); + + bcm_uart_disable(port); + bcm_uart_flush(port); + free_irq(port->irq, port); +} + +/* + * serial core request to change current uart setting + */ +static void bcm_uart_set_termios(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int ctl, baud, quot, ier; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* disable uart while changing speed */ + bcm_uart_disable(port); + bcm_uart_flush(port); + + /* update Control register */ + ctl = bcm_uart_readl(port, UART_CTL_REG); + ctl &= ~UART_CTL_BITSPERSYM_MASK; + + switch (new->c_cflag & CSIZE) { + case CS5: + ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT); + break; + case CS6: + ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT); + break; + case CS7: + ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT); + break; + default: + ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT); + break; + } + + ctl &= ~UART_CTL_STOPBITS_MASK; + if (new->c_cflag & CSTOPB) + ctl |= UART_CTL_STOPBITS_2; + else + ctl |= UART_CTL_STOPBITS_1; + + ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK); + if (new->c_cflag & PARENB) + ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK); + ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK); + if (new->c_cflag & PARODD) + ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK); + bcm_uart_writel(port, ctl, UART_CTL_REG); + + /* update Baudword register */ + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); + quot = uart_get_divisor(port, baud) - 1; + bcm_uart_writel(port, quot, UART_BAUD_REG); + + /* update Interrupt register */ + ier = bcm_uart_readl(port, UART_IR_REG); + + ier &= ~UART_IR_MASK(UART_IR_EXTIP); + if (UART_ENABLE_MS(port, new->c_cflag)) + ier |= UART_IR_MASK(UART_IR_EXTIP); + + bcm_uart_writel(port, ier, UART_IR_REG); + + /* update read/ignore mask */ + port->read_status_mask = UART_FIFO_VALID_MASK; + if (new->c_iflag & INPCK) { + port->read_status_mask |= UART_FIFO_FRAMEERR_MASK; + port->read_status_mask |= UART_FIFO_PARERR_MASK; + } + if (new->c_iflag & (BRKINT)) + port->read_status_mask |= UART_FIFO_BRKDET_MASK; + + port->ignore_status_mask = 0; + if (new->c_iflag & IGNPAR) + port->ignore_status_mask |= UART_FIFO_PARERR_MASK; + if (new->c_iflag & IGNBRK) + port->ignore_status_mask |= UART_FIFO_BRKDET_MASK; + if (!(new->c_cflag & CREAD)) + port->ignore_status_mask |= UART_FIFO_VALID_MASK; + + uart_update_timeout(port, new->c_cflag, baud); + bcm_uart_enable(port); + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * serial core request to claim uart iomem + */ +static int bcm_uart_request_port(struct uart_port *port) +{ + unsigned int size; + + size = RSET_UART_SIZE; + if (!request_mem_region(port->mapbase, size, "bcm63xx")) { + dev_err(port->dev, "Memory region busy\n"); + return -EBUSY; + } + + port->membase = ioremap(port->mapbase, size); + if (!port->membase) { + dev_err(port->dev, "Unable to map registers\n"); + release_mem_region(port->mapbase, size); + return -EBUSY; + } + return 0; +} + +/* + * serial core request to release uart iomem + */ +static void bcm_uart_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, RSET_UART_SIZE); + iounmap(port->membase); +} + +/* + * serial core request to do any port required autoconfiguration + */ +static void bcm_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + if (bcm_uart_request_port(port)) + return; + port->type = PORT_BCM63XX; + } +} + +/* + * serial core request to check that port information in serinfo are + * suitable + */ +static int bcm_uart_verify_port(struct uart_port *port, + struct serial_struct *serinfo) +{ + if (port->type != PORT_BCM63XX) + return -EINVAL; + if (port->irq != serinfo->irq) + return -EINVAL; + if (port->iotype != serinfo->io_type) + return -EINVAL; + if (port->mapbase != (unsigned long)serinfo->iomem_base) + return -EINVAL; + return 0; +} + +/* serial core callbacks */ +static struct uart_ops bcm_uart_ops = { + .tx_empty = bcm_uart_tx_empty, + .get_mctrl = bcm_uart_get_mctrl, + .set_mctrl = bcm_uart_set_mctrl, + .start_tx = bcm_uart_start_tx, + .stop_tx = bcm_uart_stop_tx, + .stop_rx = bcm_uart_stop_rx, + .enable_ms = bcm_uart_enable_ms, + .break_ctl = bcm_uart_break_ctl, + .startup = bcm_uart_startup, + .shutdown = bcm_uart_shutdown, + .set_termios = bcm_uart_set_termios, + .type = bcm_uart_type, + .release_port = bcm_uart_release_port, + .request_port = bcm_uart_request_port, + .config_port = bcm_uart_config_port, + .verify_port = bcm_uart_verify_port, +}; + + + +#ifdef CONFIG_SERIAL_BCM63XX_CONSOLE +static inline void wait_for_xmitr(struct uart_port *port) +{ + unsigned int tmout; + + /* Wait up to 10ms for the character(s) to be sent. */ + tmout = 10000; + while (--tmout) { + unsigned int val; + + val = bcm_uart_readl(port, UART_IR_REG); + if (val & UART_IR_STAT(UART_IR_TXEMPTY)) + break; + udelay(1); + } + + /* Wait up to 1s for flow control if necessary */ + if (port->flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout) { + unsigned int val; + + val = bcm_uart_readl(port, UART_EXTINP_REG); + if (val & UART_EXTINP_CTS_MASK) + break; + udelay(1); + } + } +} + +/* + * output given char + */ +static void bcm_console_putchar(struct uart_port *port, int ch) +{ + wait_for_xmitr(port); + bcm_uart_writel(port, ch, UART_FIFO_REG); +} + +/* + * console core request to output given string + */ +static void bcm_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port; + unsigned long flags; + int locked; + + port = &ports[co->index]; + + local_irq_save(flags); + if (port->sysrq) { + /* bcm_uart_interrupt() already took the lock */ + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&port->lock); + } else { + spin_lock(&port->lock); + locked = 1; + } + + /* call helper to deal with \r\n */ + uart_console_write(port, s, count, bcm_console_putchar); + + /* and wait for char to be transmitted */ + wait_for_xmitr(port); + + if (locked) + spin_unlock(&port->lock); + local_irq_restore(flags); +} + +/* + * console core request to setup given console, find matching uart + * port and setup it. + */ +static int bcm_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= BCM63XX_NR_UARTS) + return -EINVAL; + port = &ports[co->index]; + if (!port->membase) + return -ENODEV; + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver bcm_uart_driver; + +static struct console bcm63xx_console = { + .name = "ttyS", + .write = bcm_console_write, + .device = uart_console_device, + .setup = bcm_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &bcm_uart_driver, +}; + +static int __init bcm63xx_console_init(void) +{ + register_console(&bcm63xx_console); + return 0; +} + +console_initcall(bcm63xx_console_init); + +#define BCM63XX_CONSOLE (&bcm63xx_console) +#else +#define BCM63XX_CONSOLE NULL +#endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */ + +static struct uart_driver bcm_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "bcm63xx_uart", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = BCM63XX_NR_UARTS, + .cons = BCM63XX_CONSOLE, +}; + +/* + * platform driver probe/remove callback + */ +static int __devinit bcm_uart_probe(struct platform_device *pdev) +{ + struct resource *res_mem, *res_irq; + struct uart_port *port; + struct clk *clk; + int ret; + + if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS) + return -EINVAL; + + if (ports[pdev->id].membase) + return -EBUSY; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mem) + return -ENODEV; + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res_irq) + return -ENODEV; + + clk = clk_get(&pdev->dev, "periph"); + if (IS_ERR(clk)) + return -ENODEV; + + port = &ports[pdev->id]; + memset(port, 0, sizeof(*port)); + port->iotype = UPIO_MEM; + port->mapbase = res_mem->start; + port->irq = res_irq->start; + port->ops = &bcm_uart_ops; + port->flags = UPF_BOOT_AUTOCONF; + port->dev = &pdev->dev; + port->fifosize = 16; + port->uartclk = clk_get_rate(clk) / 2; + port->line = pdev->id; + clk_put(clk); + + ret = uart_add_one_port(&bcm_uart_driver, port); + if (ret) { + ports[pdev->id].membase = 0; + return ret; + } + platform_set_drvdata(pdev, port); + return 0; +} + +static int __devexit bcm_uart_remove(struct platform_device *pdev) +{ + struct uart_port *port; + + port = platform_get_drvdata(pdev); + uart_remove_one_port(&bcm_uart_driver, port); + platform_set_drvdata(pdev, NULL); + /* mark port as free */ + ports[pdev->id].membase = 0; + return 0; +} + +/* + * platform driver stuff + */ +static struct platform_driver bcm_uart_platform_driver = { + .probe = bcm_uart_probe, + .remove = __devexit_p(bcm_uart_remove), + .driver = { + .owner = THIS_MODULE, + .name = "bcm63xx_uart", + }, +}; + +static int __init bcm_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&bcm_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&bcm_uart_platform_driver); + if (ret) + uart_unregister_driver(&bcm_uart_driver); + + return ret; +} + +static void __exit bcm_uart_exit(void) +{ + platform_driver_unregister(&bcm_uart_platform_driver); + uart_unregister_driver(&bcm_uart_driver); +} + +module_init(bcm_uart_init); +module_exit(bcm_uart_exit); + +MODULE_AUTHOR("Maxime Bizon "); +MODULE_DESCRIPTION("Broadcom 63 +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define port_membase(uart) (((struct bfin_serial_port *)(uart))->port.membase) +#define get_lsr_cache(uart) (((struct bfin_serial_port *)(uart))->lsr) +#define put_lsr_cache(uart, v) (((struct bfin_serial_port *)(uart))->lsr = (v)) +#include + +#ifdef CONFIG_SERIAL_BFIN_MODULE +# undef CONFIG_EARLY_PRINTK +#endif + +#ifdef CONFIG_SERIAL_BFIN_MODULE +# undef CONFIG_EARLY_PRINTK +#endif + +/* UART name and device definitions */ +#define BFIN_SERIAL_DEV_NAME "ttyBF" +#define BFIN_SERIAL_MAJOR 204 +#define BFIN_SERIAL_MINOR 64 + +static struct bfin_serial_port *bfin_serial_ports[BFIN_UART_NR_PORTS]; + +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + +# ifndef CONFIG_SERIAL_BFIN_PIO +# error KGDB only support UART in PIO mode. +# endif + +static int kgdboc_port_line; +static int kgdboc_break_enabled; +#endif +/* + * Setup for console. Argument comes from the menuconfig + */ +#define DMA_RX_XCOUNT 512 +#define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) + +#define DMA_RX_FLUSH_JIFFIES (HZ / 50) + +#ifdef CONFIG_SERIAL_BFIN_DMA +static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); +#else +static void bfin_serial_tx_chars(struct bfin_serial_port *uart); +#endif + +static void bfin_serial_reset_irda(struct uart_port *port); + +#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ + defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) +static unsigned int bfin_serial_get_mctrl(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + if (uart->cts_pin < 0) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + /* CTS PIN is negative assertive. */ + if (UART_GET_CTS(uart)) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + else + return TIOCM_DSR | TIOCM_CAR; +} + +static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + if (uart->rts_pin < 0) + return; + + /* RTS PIN is negative assertive. */ + if (mctrl & TIOCM_RTS) + UART_ENABLE_RTS(uart); + else + UART_DISABLE_RTS(uart); +} + +/* + * Handle any change of modem status signal. + */ +static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id) +{ + struct bfin_serial_port *uart = dev_id; + unsigned int status; + + status = bfin_serial_get_mctrl(&uart->port); + uart_handle_cts_change(&uart->port, status & TIOCM_CTS); +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + uart->scts = 1; + UART_CLEAR_SCTS(uart); + UART_CLEAR_IER(uart, EDSSI); +#endif + + return IRQ_HANDLED; +} +#else +static unsigned int bfin_serial_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} +#endif + +/* + * interrupts are disabled on entry + */ +static void bfin_serial_stop_tx(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; +#ifdef CONFIG_SERIAL_BFIN_DMA + struct circ_buf *xmit = &uart->port.state->xmit; +#endif + + while (!(UART_GET_LSR(uart) & TEMT)) + cpu_relax(); + +#ifdef CONFIG_SERIAL_BFIN_DMA + disable_dma(uart->tx_dma_channel); + xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx += uart->tx_count; + uart->tx_count = 0; + uart->tx_done = 1; +#else +#ifdef CONFIG_BF54x + /* Clear TFI bit */ + UART_PUT_LSR(uart, TFI); +#endif + UART_CLEAR_IER(uart, ETBEI); +#endif +} + +/* + * port is locked and interrupts are disabled + */ +static void bfin_serial_start_tx(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + struct tty_struct *tty = uart->port.state->port.tty; + +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { + uart->scts = 0; + uart_handle_cts_change(&uart->port, uart->scts); + } +#endif + + /* + * To avoid losting RX interrupt, we reset IR function + * before sending data. + */ + if (tty->termios->c_line == N_IRDA) + bfin_serial_reset_irda(port); + +#ifdef CONFIG_SERIAL_BFIN_DMA + if (uart->tx_done) + bfin_serial_dma_tx_chars(uart); +#else + UART_SET_IER(uart, ETBEI); + bfin_serial_tx_chars(uart); +#endif +} + +/* + * Interrupts are enabled + */ +static void bfin_serial_stop_rx(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + UART_CLEAR_IER(uart, ERBFI); +} + +/* + * Set the modem control timer to fire immediately. + */ +static void bfin_serial_enable_ms(struct uart_port *port) +{ +} + + +#if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO) +# define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold) +# define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v)) +#else +# define UART_GET_ANOMALY_THRESHOLD(uart) 0 +# define UART_SET_ANOMALY_THRESHOLD(uart, v) +#endif + +#ifdef CONFIG_SERIAL_BFIN_PIO +static void bfin_serial_rx_chars(struct bfin_serial_port *uart) +{ + struct tty_struct *tty = NULL; + unsigned int status, ch, flg; + static struct timeval anomaly_start = { .tv_sec = 0 }; + + status = UART_GET_LSR(uart); + UART_CLEAR_LSR(uart); + + ch = UART_GET_CHAR(uart); + uart->port.icount.rx++; + +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + if (kgdb_connected && kgdboc_port_line == uart->port.line + && kgdboc_break_enabled) + if (ch == 0x3) {/* Ctrl + C */ + kgdb_breakpoint(); + return; + } + + if (!uart->port.state || !uart->port.state->port.tty) + return; +#endif + tty = uart->port.state->port.tty; + + if (ANOMALY_05000363) { + /* The BF533 (and BF561) family of processors have a nice anomaly + * where they continuously generate characters for a "single" break. + * We have to basically ignore this flood until the "next" valid + * character comes across. Due to the nature of the flood, it is + * not possible to reliably catch bytes that are sent too quickly + * after this break. So application code talking to the Blackfin + * which sends a break signal must allow at least 1.5 character + * times after the end of the break for things to stabilize. This + * timeout was picked as it must absolutely be larger than 1 + * character time +/- some percent. So 1.5 sounds good. All other + * Blackfin families operate properly. Woo. + */ + if (anomaly_start.tv_sec) { + struct timeval curr; + suseconds_t usecs; + + if ((~ch & (~ch + 1)) & 0xff) + goto known_good_char; + + do_gettimeofday(&curr); + if (curr.tv_sec - anomaly_start.tv_sec > 1) + goto known_good_char; + + usecs = 0; + if (curr.tv_sec != anomaly_start.tv_sec) + usecs += USEC_PER_SEC; + usecs += curr.tv_usec - anomaly_start.tv_usec; + + if (usecs > UART_GET_ANOMALY_THRESHOLD(uart)) + goto known_good_char; + + if (ch) + anomaly_start.tv_sec = 0; + else + anomaly_start = curr; + + return; + + known_good_char: + status &= ~BI; + anomaly_start.tv_sec = 0; + } + } + + if (status & BI) { + if (ANOMALY_05000363) + if (bfin_revid() < 5) + do_gettimeofday(&anomaly_start); + uart->port.icount.brk++; + if (uart_handle_break(&uart->port)) + goto ignore_char; + status &= ~(PE | FE); + } + if (status & PE) + uart->port.icount.parity++; + if (status & OE) + uart->port.icount.overrun++; + if (status & FE) + uart->port.icount.frame++; + + status &= uart->port.read_status_mask; + + if (status & BI) + flg = TTY_BREAK; + else if (status & PE) + flg = TTY_PARITY; + else if (status & FE) + flg = TTY_FRAME; + else + flg = TTY_NORMAL; + + if (uart_handle_sysrq_char(&uart->port, ch)) + goto ignore_char; + + uart_insert_char(&uart->port, status, OE, ch, flg); + + ignore_char: + tty_flip_buffer_push(tty); +} + +static void bfin_serial_tx_chars(struct bfin_serial_port *uart) +{ + struct circ_buf *xmit = &uart->port.state->xmit; + + if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { +#ifdef CONFIG_BF54x + /* Clear TFI bit */ + UART_PUT_LSR(uart, TFI); +#endif + /* Anomaly notes: + * 05000215 - we always clear ETBEI within last UART TX + * interrupt to end a string. It is always set + * when start a new tx. + */ + UART_CLEAR_IER(uart, ETBEI); + return; + } + + if (uart->port.x_char) { + UART_PUT_CHAR(uart, uart->port.x_char); + uart->port.icount.tx++; + uart->port.x_char = 0; + } + + while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { + UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uart->port); +} + +static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) +{ + struct bfin_serial_port *uart = dev_id; + + spin_lock(&uart->port.lock); + while (UART_GET_LSR(uart) & DR) + bfin_serial_rx_chars(uart); + spin_unlock(&uart->port.lock); + + return IRQ_HANDLED; +} + +static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) +{ + struct bfin_serial_port *uart = dev_id; + +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { + uart->scts = 0; + uart_handle_cts_change(&uart->port, uart->scts); + } +#endif + spin_lock(&uart->port.lock); + if (UART_GET_LSR(uart) & THRE) + bfin_serial_tx_chars(uart); + spin_unlock(&uart->port.lock); + + return IRQ_HANDLED; +} +#endif + +#ifdef CONFIG_SERIAL_BFIN_DMA +static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) +{ + struct circ_buf *xmit = &uart->port.state->xmit; + + uart->tx_done = 0; + + if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { + uart->tx_count = 0; + uart->tx_done = 1; + return; + } + + if (uart->port.x_char) { + UART_PUT_CHAR(uart, uart->port.x_char); + uart->port.icount.tx++; + uart->port.x_char = 0; + } + + uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); + if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) + uart->tx_count = UART_XMIT_SIZE - xmit->tail; + blackfin_dcache_flush_range((unsigned long)(xmit->buf+xmit->tail), + (unsigned long)(xmit->buf+xmit->tail+uart->tx_count)); + set_dma_config(uart->tx_dma_channel, + set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP, + INTR_ON_BUF, + DIMENSION_LINEAR, + DATA_SIZE_8, + DMA_SYNC_RESTART)); + set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail)); + set_dma_x_count(uart->tx_dma_channel, uart->tx_count); + set_dma_x_modify(uart->tx_dma_channel, 1); + SSYNC(); + enable_dma(uart->tx_dma_channel); + + UART_SET_IER(uart, ETBEI); +} + +static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) +{ + struct tty_struct *tty = uart->port.state->port.tty; + int i, flg, status; + + status = UART_GET_LSR(uart); + UART_CLEAR_LSR(uart); + + uart->port.icount.rx += + CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, + UART_XMIT_SIZE); + + if (status & BI) { + uart->port.icount.brk++; + if (uart_handle_break(&uart->port)) + goto dma_ignore_char; + status &= ~(PE | FE); + } + if (status & PE) + uart->port.icount.parity++; + if (status & OE) + uart->port.icount.overrun++; + if (status & FE) + uart->port.icount.frame++; + + status &= uart->port.read_status_mask; + + if (status & BI) + flg = TTY_BREAK; + else if (status & PE) + flg = TTY_PARITY; + else if (status & FE) + flg = TTY_FRAME; + else + flg = TTY_NORMAL; + + for (i = uart->rx_dma_buf.tail; ; i++) { + if (i >= UART_XMIT_SIZE) + i = 0; + if (i == uart->rx_dma_buf.head) + break; + if (!uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) + uart_insert_char(&uart->port, status, OE, + uart->rx_dma_buf.buf[i], flg); + } + + dma_ignore_char: + tty_flip_buffer_push(tty); +} + +void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) +{ + int x_pos, pos; + + dma_disable_irq(uart->tx_dma_channel); + dma_disable_irq(uart->rx_dma_channel); + spin_lock_bh(&uart->port.lock); + + /* 2D DMA RX buffer ring is used. Because curr_y_count and + * curr_x_count can't be read as an atomic operation, + * curr_y_count should be read before curr_x_count. When + * curr_x_count is read, curr_y_count may already indicate + * next buffer line. But, the position calculated here is + * still indicate the old line. The wrong position data may + * be smaller than current buffer tail, which cause garbages + * are received if it is not prohibit. + */ + uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); + x_pos = get_dma_curr_xcount(uart->rx_dma_channel); + uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; + if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) + uart->rx_dma_nrows = 0; + x_pos = DMA_RX_XCOUNT - x_pos; + if (x_pos == DMA_RX_XCOUNT) + x_pos = 0; + + pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos; + /* Ignore receiving data if new position is in the same line of + * current buffer tail and small. + */ + if (pos > uart->rx_dma_buf.tail || + uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { + uart->rx_dma_buf.head = pos; + bfin_serial_dma_rx_chars(uart); + uart->rx_dma_buf.tail = uart->rx_dma_buf.head; + } + + spin_unlock_bh(&uart->port.lock); + dma_enable_irq(uart->tx_dma_channel); + dma_enable_irq(uart->rx_dma_channel); + + mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); +} + +static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) +{ + struct bfin_serial_port *uart = dev_id; + struct circ_buf *xmit = &uart->port.state->xmit; + +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) { + uart->scts = 0; + uart_handle_cts_change(&uart->port, uart->scts); + } +#endif + + spin_lock(&uart->port.lock); + if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { + disable_dma(uart->tx_dma_channel); + clear_dma_irqstat(uart->tx_dma_channel); + /* Anomaly notes: + * 05000215 - we always clear ETBEI within last UART TX + * interrupt to end a string. It is always set + * when start a new tx. + */ + UART_CLEAR_IER(uart, ETBEI); + xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx += uart->tx_count; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uart->port); + + bfin_serial_dma_tx_chars(uart); + } + + spin_unlock(&uart->port.lock); + return IRQ_HANDLED; +} + +static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) +{ + struct bfin_serial_port *uart = dev_id; + unsigned short irqstat; + int x_pos, pos; + + spin_lock(&uart->port.lock); + irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); + clear_dma_irqstat(uart->rx_dma_channel); + + uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); + x_pos = get_dma_curr_xcount(uart->rx_dma_channel); + uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; + if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) + uart->rx_dma_nrows = 0; + + pos = uart->rx_dma_nrows * DMA_RX_XCOUNT; + if (pos > uart->rx_dma_buf.tail || + uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { + uart->rx_dma_buf.head = pos; + bfin_serial_dma_rx_chars(uart); + uart->rx_dma_buf.tail = uart->rx_dma_buf.head; + } + + spin_unlock(&uart->port.lock); + + return IRQ_HANDLED; +} +#endif + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int bfin_serial_tx_empty(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned short lsr; + + lsr = UART_GET_LSR(uart); + if (lsr & TEMT) + return TIOCSER_TEMT; + else + return 0; +} + +static void bfin_serial_break_ctl(struct uart_port *port, int break_state) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + u16 lcr = UART_GET_LCR(uart); + if (break_state) + lcr |= SB; + else + lcr &= ~SB; + UART_PUT_LCR(uart, lcr); + SSYNC(); +} + +static int bfin_serial_startup(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + +#ifdef CONFIG_SERIAL_BFIN_DMA + dma_addr_t dma_handle; + + if (request_dma(uart->rx_dma_channel, "BFIN_UART_RX") < 0) { + printk(KERN_NOTICE "Unable to attach Blackfin UART RX DMA channel\n"); + return -EBUSY; + } + + if (request_dma(uart->tx_dma_channel, "BFIN_UART_TX") < 0) { + printk(KERN_NOTICE "Unable to attach Blackfin UART TX DMA channel\n"); + free_dma(uart->rx_dma_channel); + return -EBUSY; + } + + set_dma_callback(uart->rx_dma_channel, bfin_serial_dma_rx_int, uart); + set_dma_callback(uart->tx_dma_channel, bfin_serial_dma_tx_int, uart); + + uart->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA); + uart->rx_dma_buf.head = 0; + uart->rx_dma_buf.tail = 0; + uart->rx_dma_nrows = 0; + + set_dma_config(uart->rx_dma_channel, + set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO, + INTR_ON_ROW, DIMENSION_2D, + DATA_SIZE_8, + DMA_SYNC_RESTART)); + set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT); + set_dma_x_modify(uart->rx_dma_channel, 1); + set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT); + set_dma_y_modify(uart->rx_dma_channel, 1); + set_dma_start_addr(uart->rx_dma_channel, (unsigned long)uart->rx_dma_buf.buf); + enable_dma(uart->rx_dma_channel); + + uart->rx_dma_timer.data = (unsigned long)(uart); + uart->rx_dma_timer.function = (void *)bfin_serial_rx_dma_timeout; + uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; + add_timer(&(uart->rx_dma_timer)); +#else +# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + if (kgdboc_port_line == uart->port.line && kgdboc_break_enabled) + kgdboc_break_enabled = 0; + else { +# endif + if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, + "BFIN_UART_RX", uart)) { + printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n"); + return -EBUSY; + } + + if (request_irq + (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED, + "BFIN_UART_TX", uart)) { + printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n"); + free_irq(uart->port.irq, uart); + return -EBUSY; + } + +# ifdef CONFIG_BF54x + { + /* + * UART2 and UART3 on BF548 share interrupt PINs and DMA + * controllers with SPORT2 and SPORT3. UART rx and tx + * interrupts are generated in PIO mode only when configure + * their peripheral mapping registers properly, which means + * request corresponding DMA channels in PIO mode as well. + */ + unsigned uart_dma_ch_rx, uart_dma_ch_tx; + + switch (uart->port.irq) { + case IRQ_UART3_RX: + uart_dma_ch_rx = CH_UART3_RX; + uart_dma_ch_tx = CH_UART3_TX; + break; + case IRQ_UART2_RX: + uart_dma_ch_rx = CH_UART2_RX; + uart_dma_ch_tx = CH_UART2_TX; + break; + default: + uart_dma_ch_rx = uart_dma_ch_tx = 0; + break; + }; + + if (uart_dma_ch_rx && + request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) { + printk(KERN_NOTICE"Fail to attach UART interrupt\n"); + free_irq(uart->port.irq, uart); + free_irq(uart->port.irq + 1, uart); + return -EBUSY; + } + if (uart_dma_ch_tx && + request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) { + printk(KERN_NOTICE "Fail to attach UART interrupt\n"); + free_dma(uart_dma_ch_rx); + free_irq(uart->port.irq, uart); + free_irq(uart->port.irq + 1, uart); + return -EBUSY; + } + } +# endif +# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + } +# endif +#endif + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) { + if (request_irq(gpio_to_irq(uart->cts_pin), + bfin_serial_mctrl_cts_int, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_DISABLED, "BFIN_UART_CTS", uart)) { + uart->cts_pin = -1; + pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n"); + } + } + if (uart->rts_pin >= 0) { + gpio_direction_output(uart->rts_pin, 0); + } +#endif +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + if (uart->cts_pin >= 0 && request_irq(uart->status_irq, + bfin_serial_mctrl_cts_int, + IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) { + uart->cts_pin = -1; + pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n"); + } + + /* CTS RTS PINs are negative assertive. */ + UART_PUT_MCR(uart, ACTS); + UART_SET_IER(uart, EDSSI); +#endif + + UART_SET_IER(uart, ERBFI); + return 0; +} + +static void bfin_serial_shutdown(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + +#ifdef CONFIG_SERIAL_BFIN_DMA + disable_dma(uart->tx_dma_channel); + free_dma(uart->tx_dma_channel); + disable_dma(uart->rx_dma_channel); + free_dma(uart->rx_dma_channel); + del_timer(&(uart->rx_dma_timer)); + dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0); +#else +#ifdef CONFIG_BF54x + switch (uart->port.irq) { + case IRQ_UART3_RX: + free_dma(CH_UART3_RX); + free_dma(CH_UART3_TX); + break; + case IRQ_UART2_RX: + free_dma(CH_UART2_RX); + free_dma(CH_UART2_TX); + break; + default: + break; + }; +#endif + free_irq(uart->port.irq, uart); + free_irq(uart->port.irq+1, uart); +#endif + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) + free_irq(gpio_to_irq(uart->cts_pin), uart); +#endif +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + if (uart->cts_pin >= 0) + free_irq(uart->status_irq, uart); +#endif +} + +static void +bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned long flags; + unsigned int baud, quot; + unsigned short val, ier, lcr = 0; + + switch (termios->c_cflag & CSIZE) { + case CS8: + lcr = WLS(8); + break; + case CS7: + lcr = WLS(7); + break; + case CS6: + lcr = WLS(6); + break; + case CS5: + lcr = WLS(5); + break; + default: + printk(KERN_ERR "%s: word lengh not supported\n", + __func__); + } + + /* Anomaly notes: + * 05000231 - STOP bit is always set to 1 whatever the user is set. + */ + if (termios->c_cflag & CSTOPB) { + if (ANOMALY_05000231) + printk(KERN_WARNING "STOP bits other than 1 is not " + "supported in case of anomaly 05000231.\n"); + else + lcr |= STB; + } + if (termios->c_cflag & PARENB) + lcr |= PEN; + if (!(termios->c_cflag & PARODD)) + lcr |= EPS; + if (termios->c_cflag & CMSPAR) + lcr |= STP; + + spin_lock_irqsave(&uart->port.lock, flags); + + port->read_status_mask = OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= (FE | PE); + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= BI; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= FE | PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= OE; + } + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + /* If discipline is not IRDA, apply ANOMALY_05000230 */ + if (termios->c_line != N_IRDA) + quot -= ANOMALY_05000230; + + UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15); + + /* Disable UART */ + ier = UART_GET_IER(uart); + UART_DISABLE_INTS(uart); + + /* Set DLAB in LCR to Access DLL and DLH */ + UART_SET_DLAB(uart); + + UART_PUT_DLL(uart, quot & 0xFF); + UART_PUT_DLH(uart, (quot >> 8) & 0xFF); + SSYNC(); + + /* Clear DLAB in LCR to Access THR RBR IER */ + UART_CLEAR_DLAB(uart); + + UART_PUT_LCR(uart, lcr); + + /* Enable UART */ + UART_ENABLE_INTS(uart, ier); + + val = UART_GET_GCTL(uart); + val |= UCEN; + UART_PUT_GCTL(uart, val); + + /* Port speed changed, update the per-port timeout. */ + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&uart->port.lock, flags); +} + +static const char *bfin_serial_type(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + return uart->port.type == PORT_BFIN ? "BFIN-UART" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void bfin_serial_release_port(struct uart_port *port) +{ +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int bfin_serial_request_port(struct uart_port *port) +{ + return 0; +} + +/* + * Configure/autoconfigure the port. + */ +static void bfin_serial_config_port(struct uart_port *port, int flags) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + if (flags & UART_CONFIG_TYPE && + bfin_serial_request_port(&uart->port) == 0) + uart->port.type = PORT_BFIN; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + * The only change we allow are to the flags and type, and + * even then only between PORT_BFIN and PORT_UNKNOWN + */ +static int +bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return 0; +} + +/* + * Enable the IrDA function if tty->ldisc.num is N_IRDA. + * In other cases, disable IrDA function. + */ +static void bfin_serial_set_ldisc(struct uart_port *port, int ld) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned short val; + + switch (ld) { + case N_IRDA: + val = UART_GET_GCTL(uart); + val |= (IREN | RPOLC); + UART_PUT_GCTL(uart, val); + break; + default: + val = UART_GET_GCTL(uart); + val &= ~(IREN | RPOLC); + UART_PUT_GCTL(uart, val); + } +} + +static void bfin_serial_reset_irda(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned short val; + + val = UART_GET_GCTL(uart); + val &= ~(IREN | RPOLC); + UART_PUT_GCTL(uart, val); + SSYNC(); + val |= (IREN | RPOLC); + UART_PUT_GCTL(uart, val); + SSYNC(); +} + +#ifdef CONFIG_CONSOLE_POLL +/* Anomaly notes: + * 05000099 - Because we only use THRE in poll_put and DR in poll_get, + * losing other bits of UART_LSR is not a problem here. + */ +static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + while (!(UART_GET_LSR(uart) & THRE)) + cpu_relax(); + + UART_CLEAR_DLAB(uart); + UART_PUT_CHAR(uart, (unsigned char)chr); +} + +static int bfin_serial_poll_get_char(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned char chr; + + while (!(UART_GET_LSR(uart) & DR)) + cpu_relax(); + + UART_CLEAR_DLAB(uart); + chr = UART_GET_CHAR(uart); + + return chr; +} +#endif + +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) +static void bfin_kgdboc_port_shutdown(struct uart_port *port) +{ + if (kgdboc_break_enabled) { + kgdboc_break_enabled = 0; + bfin_serial_shutdown(port); + } +} + +static int bfin_kgdboc_port_startup(struct uart_port *port) +{ + kgdboc_port_line = port->line; + kgdboc_break_enabled = !bfin_serial_startup(port); + return 0; +} +#endif + +static struct uart_ops bfin_serial_pops = { + .tx_empty = bfin_serial_tx_empty, + .set_mctrl = bfin_serial_set_mctrl, + .get_mctrl = bfin_serial_get_mctrl, + .stop_tx = bfin_serial_stop_tx, + .start_tx = bfin_serial_start_tx, + .stop_rx = bfin_serial_stop_rx, + .enable_ms = bfin_serial_enable_ms, + .break_ctl = bfin_serial_break_ctl, + .startup = bfin_serial_startup, + .shutdown = bfin_serial_shutdown, + .set_termios = bfin_serial_set_termios, + .set_ldisc = bfin_serial_set_ldisc, + .type = bfin_serial_type, + .release_port = bfin_serial_release_port, + .request_port = bfin_serial_request_port, + .config_port = bfin_serial_config_port, + .verify_port = bfin_serial_verify_port, +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + .kgdboc_port_startup = bfin_kgdboc_port_startup, + .kgdboc_port_shutdown = bfin_kgdboc_port_shutdown, +#endif +#ifdef CONFIG_CONSOLE_POLL + .poll_put_char = bfin_serial_poll_put_char, + .poll_get_char = bfin_serial_poll_get_char, +#endif +}; + +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +/* + * If the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init +bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, + int *parity, int *bits) +{ + unsigned short status; + + status = UART_GET_IER(uart) & (ERBFI | ETBEI); + if (status == (ERBFI | ETBEI)) { + /* ok, the port was enabled */ + u16 lcr, dlh, dll; + + lcr = UART_GET_LCR(uart); + + *parity = 'n'; + if (lcr & PEN) { + if (lcr & EPS) + *parity = 'e'; + else + *parity = 'o'; + } + switch (lcr & 0x03) { + case 0: *bits = 5; break; + case 1: *bits = 6; break; + case 2: *bits = 7; break; + case 3: *bits = 8; break; + } + /* Set DLAB in LCR to Access DLL and DLH */ + UART_SET_DLAB(uart); + + dll = UART_GET_DLL(uart); + dlh = UART_GET_DLH(uart); + + /* Clear DLAB in LCR to Access THR RBR IER */ + UART_CLEAR_DLAB(uart); + + *baud = get_sclk() / (16*(dll | dlh << 8)); + } + pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits); +} + +static struct uart_driver bfin_serial_reg; + +static void bfin_serial_console_putchar(struct uart_port *port, int ch) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + while (!(UART_GET_LSR(uart) & THRE)) + barrier(); + UART_PUT_CHAR(uart, ch); +} + +#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) || + defined (CONFIG_EARLY_PRINTK) */ + +#ifdef CONFIG_SERIAL_BFIN_CONSOLE +#define CLASS_BFIN_CONSOLE "bfin-console" +/* + * Interrupts are disabled on entering + */ +static void +bfin_serial_console_write(struct console *co, const char *s, unsigned int count) +{ + struct bfin_serial_port *uart = bfin_serial_ports[co->index]; + unsigned long flags; + + spin_lock_irqsave(&uart->port.lock, flags); + uart_console_write(&uart->port, s, count, bfin_serial_console_putchar); + spin_unlock_irqrestore(&uart->port.lock, flags); + +} + +static int __init +bfin_serial_console_setup(struct console *co, char *options) +{ + struct bfin_serial_port *uart; + int baud = 57600; + int bits = 8; + int parity = 'n'; +# if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ + defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) + int flow = 'r'; +# else + int flow = 'n'; +# endif + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index < 0 || co->index >= BFIN_UART_NR_PORTS) + return -ENODEV; + + uart = bfin_serial_ports[co->index]; + if (!uart) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + bfin_serial_console_get_options(uart, &baud, &parity, &bits); + + return uart_set_options(&uart->port, co, baud, parity, bits, flow); +} + +static struct console bfin_serial_console = { + .name = BFIN_SERIAL_DEV_NAME, + .write = bfin_serial_console_write, + .device = uart_console_device, + .setup = bfin_serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &bfin_serial_reg, +}; +#define BFIN_SERIAL_CONSOLE &bfin_serial_console +#else +#define BFIN_SERIAL_CONSOLE NULL +#endif /* CONFIG_SERIAL_BFIN_CONSOLE */ + +#ifdef CONFIG_EARLY_PRINTK +static struct bfin_serial_port bfin_earlyprintk_port; +#define CLASS_BFIN_EARLYPRINTK "bfin-earlyprintk" + +/* + * Interrupts are disabled on entering + */ +static void +bfin_earlyprintk_console_write(struct console *co, const char *s, unsigned int count) +{ + unsigned long flags; + + if (bfin_earlyprintk_port.port.line != co->index) + return; + + spin_lock_irqsave(&bfin_earlyprintk_port.port.lock, flags); + uart_console_write(&bfin_earlyprintk_port.port, s, count, + bfin_serial_console_putchar); + spin_unlock_irqrestore(&bfin_earlyprintk_port.port.lock, flags); +} + +/* + * This should have a .setup or .early_setup in it, but then things get called + * without the command line options, and the baud rate gets messed up - so + * don't let the common infrastructure play with things. (see calls to setup + * & earlysetup in ./kernel/printk.c:register_console() + */ +static struct __initdata console bfin_early_serial_console = { + .name = "early_BFuart", + .write = bfin_earlyprintk_console_write, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &bfin_serial_reg, +}; +#endif + +static struct uart_driver bfin_serial_reg = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = BFIN_SERIAL_DEV_NAME, + .major = BFIN_SERIAL_MAJOR, + .minor = BFIN_SERIAL_MINOR, + .nr = BFIN_UART_NR_PORTS, + .cons = BFIN_SERIAL_CONSOLE, +}; + +static int bfin_serial_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct bfin_serial_port *uart = platform_get_drvdata(pdev); + + return uart_suspend_port(&bfin_serial_reg, &uart->port); +} + +static int bfin_serial_resume(struct platform_device *pdev) +{ + struct bfin_serial_port *uart = platform_get_drvdata(pdev); + + return uart_resume_port(&bfin_serial_reg, &uart->port); +} + +static int bfin_serial_probe(struct platform_device *pdev) +{ + struct resource *res; + struct bfin_serial_port *uart = NULL; + int ret = 0; + + if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) { + dev_err(&pdev->dev, "Wrong bfin uart platform device id.\n"); + return -ENOENT; + } + + if (bfin_serial_ports[pdev->id] == NULL) { + + uart = kzalloc(sizeof(*uart), GFP_KERNEL); + if (!uart) { + dev_err(&pdev->dev, + "fail to malloc bfin_serial_port\n"); + return -ENOMEM; + } + bfin_serial_ports[pdev->id] = uart; + +#ifdef CONFIG_EARLY_PRINTK + if (!(bfin_earlyprintk_port.port.membase + && bfin_earlyprintk_port.port.line == pdev->id)) { + /* + * If the peripheral PINs of current port is allocated + * in earlyprintk probe stage, don't do it again. + */ +#endif + ret = peripheral_request_list( + (unsigned short *)pdev->dev.platform_data, DRIVER_NAME); + if (ret) { + dev_err(&pdev->dev, + "fail to request bfin serial peripherals\n"); + goto out_error_free_mem; + } +#ifdef CONFIG_EARLY_PRINTK + } +#endif + + spin_lock_init(&uart->port.lock); + uart->port.uartclk = get_sclk(); + uart->port.fifosize = BFIN_UART_TX_FIFO_SIZE; + uart->port.ops = &bfin_serial_pops; + uart->port.line = pdev->id; + uart->port.iotype = UPIO_MEM; + uart->port.flags = UPF_BOOT_AUTOCONF; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); + ret = -ENOENT; + goto out_error_free_peripherals; + } + + uart->port.membase = ioremap(res->start, + res->end - res->start); + if (!uart->port.membase) { + dev_err(&pdev->dev, "Cannot map uart IO\n"); + ret = -ENXIO; + goto out_error_free_peripherals; + } + uart->port.mapbase = res->start; + + uart->port.irq = platform_get_irq(pdev, 0); + if (uart->port.irq < 0) { + dev_err(&pdev->dev, "No uart RX/TX IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + + uart->status_irq = platform_get_irq(pdev, 1); + if (uart->status_irq < 0) { + dev_err(&pdev->dev, "No uart status IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + +#ifdef CONFIG_SERIAL_BFIN_DMA + uart->tx_done = 1; + uart->tx_count = 0; + + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No uart TX DMA channel specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + uart->tx_dma_channel = res->start; + + res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (res == NULL) { + dev_err(&pdev->dev, "No uart RX DMA channel specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + uart->rx_dma_channel = res->start; + + init_timer(&(uart->rx_dma_timer)); +#endif + +#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ + defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) + uart->cts_pin = -1; + else + uart->cts_pin = res->start; + + res = platform_get_resource(pdev, IORESOURCE_IO, 1); + if (res == NULL) + uart->rts_pin = -1; + else + uart->rts_pin = res->start; +# if defined(CONFIG_SERIAL_BFIN_CTSRTS) + if (uart->rts_pin >= 0) + gpio_request(uart->rts_pin, DRIVER_NAME); +# endif +#endif + } + +#ifdef CONFIG_SERIAL_BFIN_CONSOLE + if (!is_early_platform_device(pdev)) { +#endif + uart = bfin_serial_ports[pdev->id]; + uart->port.dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, uart); + ret = uart_add_one_port(&bfin_serial_reg, &uart->port); +#ifdef CONFIG_SERIAL_BFIN_CONSOLE + } +#endif + + if (!ret) + return 0; + + if (uart) { +out_error_unmap: + iounmap(uart->port.membase); +out_error_free_peripherals: + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); +out_error_free_mem: + kfree(uart); + bfin_serial_ports[pdev->id] = NULL; + } + + return ret; +} + +static int __devexit bfin_serial_remove(struct platform_device *pdev) +{ + struct bfin_serial_port *uart = platform_get_drvdata(pdev); + + dev_set_drvdata(&pdev->dev, NULL); + + if (uart) { + uart_remove_one_port(&bfin_serial_reg, &uart->port); +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->rts_pin >= 0) + gpio_free(uart->rts_pin); +#endif + iounmap(uart->port.membase); + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); + kfree(uart); + bfin_serial_ports[pdev->id] = NULL; + } + + return 0; +} + +static struct platform_driver bfin_serial_driver = { + .probe = bfin_serial_probe, + .remove = __devexit_p(bfin_serial_remove), + .suspend = bfin_serial_suspend, + .resume = bfin_serial_resume, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) +static __initdata struct early_platform_driver early_bfin_serial_driver = { + .class_str = CLASS_BFIN_CONSOLE, + .pdrv = &bfin_serial_driver, + .requested_id = EARLY_PLATFORM_ID_UNSET, +}; + +static int __init bfin_serial_rs_console_init(void) +{ + early_platform_driver_register(&early_bfin_serial_driver, DRIVER_NAME); + + early_platform_driver_probe(CLASS_BFIN_CONSOLE, BFIN_UART_NR_PORTS, 0); + + register_console(&bfin_serial_console); + + return 0; +} +console_initcall(bfin_serial_rs_console_init); +#endif + +#ifdef CONFIG_EARLY_PRINTK +/* + * Memory can't be allocated dynamically during earlyprink init stage. + * So, do individual probe for earlyprink with a static uart port variable. + */ +static int bfin_earlyprintk_probe(struct platform_device *pdev) +{ + struct resource *res; + int ret; + + if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) { + dev_err(&pdev->dev, "Wrong earlyprintk platform device id.\n"); + return -ENOENT; + } + + ret = peripheral_request_list( + (unsigned short *)pdev->dev.platform_data, DRIVER_NAME); + if (ret) { + dev_err(&pdev->dev, + "fail to request bfin serial peripherals\n"); + return ret; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); + ret = -ENOENT; + goto out_error_free_peripherals; + } + + bfin_earlyprintk_port.port.membase = ioremap(res->start, + res->end - res->start); + if (!bfin_earlyprintk_port.port.membase) { + dev_err(&pdev->dev, "Cannot map uart IO\n"); + ret = -ENXIO; + goto out_error_free_peripherals; + } + bfin_earlyprintk_port.port.mapbase = res->start; + bfin_earlyprintk_port.port.line = pdev->id; + bfin_earlyprintk_port.port.uartclk = get_sclk(); + bfin_earlyprintk_port.port.fifosize = BFIN_UART_TX_FIFO_SIZE; + spin_lock_init(&bfin_earlyprintk_port.port.lock); + + return 0; + +out_error_free_peripherals: + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); + + return ret; +} + +static struct platform_driver bfin_earlyprintk_driver = { + .probe = bfin_earlyprintk_probe, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static __initdata struct early_platform_driver early_bfin_earlyprintk_driver = { + .class_str = CLASS_BFIN_EARLYPRINTK, + .pdrv = &bfin_earlyprintk_driver, + .requested_id = EARLY_PLATFORM_ID_UNSET, +}; + +struct console __init *bfin_earlyserial_init(unsigned int port, + unsigned int cflag) +{ + struct ktermios t; + char port_name[20]; + + if (port < 0 || port >= BFIN_UART_NR_PORTS) + return NULL; + + /* + * Only probe resource of the given port in earlyprintk boot arg. + * The expected port id should be indicated in port name string. + */ + snprintf(port_name, 20, DRIVER_NAME ".%d", port); + early_platform_driver_register(&early_bfin_earlyprintk_driver, + port_name); + early_platform_driver_probe(CLASS_BFIN_EARLYPRINTK, 1, 0); + + if (!bfin_earlyprintk_port.port.membase) + return NULL; + +#ifdef CONFIG_SERIAL_BFIN_CONSOLE + /* + * If we are using early serial, don't let the normal console rewind + * log buffer, since that causes things to be printed multiple times + */ + bfin_serial_console.flags &= ~CON_PRINTBUFFER; +#endif + + bfin_early_serial_console.index = port; + t.c_cflag = cflag; + t.c_iflag = 0; + t.c_oflag = 0; + t.c_lflag = ICANON; + t.c_line = port; + bfin_serial_set_termios(&bfin_earlyprintk_port.port, &t, &t); + + return &bfin_early_serial_console; +} +#endif /* CONFIG_EARLY_PRINTK */ + +static int __init bfin_serial_init(void) +{ + int ret; + + pr_info("Blackfin serial driver\n"); + + ret = uart_register_driver(&bfin_serial_reg); + if (ret) { + pr_err("failed to register %s:%d\n", + bfin_serial_reg.driver_name, ret); + } + + ret = platform_driver_register(&bfin_serial_driver); + if (ret) { + pr_err("fail to register bfin uart\n"); + uart_unregister_driver(&bfin_serial_reg); + } + + return ret; +} + +static void __exit bfin_serial_exit(void) +{ + platform_driver_unregister(&bfin_serial_driver); + uart_unregister_driver(&bfin_serial_reg); +} + + +module_init(bfin_serial_init); +module_exit(bfin_serial_exit); + +MODULE_AUTHOR("Sonic Zhang, Aubrey Li"); +MODULE_DESCRIPTION("Blackfin generic serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR); +MODULE_ALIAS("platform:bfin-uart"); diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c new file mode 100644 index 000000000000..e95c524d9d18 --- /dev/null +++ b/drivers/tty/serial/bfin_sport_uart.c @@ -0,0 +1,935 @@ +/* + * Blackfin On-Chip Sport Emulated UART Driver + * + * Copyright 2006-2009 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +/* + * This driver and the hardware supported are in term of EE-191 of ADI. + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf + * This application note describe how to implement a UART on a Sharc DSP, + * but this driver is implemented on Blackfin Processor. + * Transmit Frame Sync is not used by this driver to transfer data out. + */ + +/* #define DEBUG */ + +#define DRV_NAME "bfin-sport-uart" +#define DEVICE_NAME "ttySS" +#define pr_fmt(fmt) DRV_NAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "bfin_sport_uart.h" + +struct sport_uart_port { + struct uart_port port; + int err_irq; + unsigned short csize; + unsigned short rxmask; + unsigned short txmask1; + unsigned short txmask2; + unsigned char stopb; +/* unsigned char parib; */ +#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS + int cts_pin; + int rts_pin; +#endif +}; + +static int sport_uart_tx_chars(struct sport_uart_port *up); +static void sport_stop_tx(struct uart_port *port); + +static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value) +{ + pr_debug("%s value:%x, mask1=0x%x, mask2=0x%x\n", __func__, value, + up->txmask1, up->txmask2); + + /* Place Start and Stop bits */ + __asm__ __volatile__ ( + "%[val] <<= 1;" + "%[val] = %[val] & %[mask1];" + "%[val] = %[val] | %[mask2];" + : [val]"+d"(value) + : [mask1]"d"(up->txmask1), [mask2]"d"(up->txmask2) + : "ASTAT" + ); + pr_debug("%s value:%x\n", __func__, value); + + SPORT_PUT_TX(up, value); +} + +static inline unsigned char rx_one_byte(struct sport_uart_port *up) +{ + unsigned int value; + unsigned char extract; + u32 tmp_mask1, tmp_mask2, tmp_shift, tmp; + + if ((up->csize + up->stopb) > 7) + value = SPORT_GET_RX32(up); + else + value = SPORT_GET_RX(up); + + pr_debug("%s value:%x, cs=%d, mask=0x%x\n", __func__, value, + up->csize, up->rxmask); + + /* Extract data */ + __asm__ __volatile__ ( + "%[extr] = 0;" + "%[mask1] = %[rxmask];" + "%[mask2] = 0x0200(Z);" + "%[shift] = 0;" + "LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];" + ".Lloop_s:" + "%[tmp] = extract(%[val], %[mask1].L)(Z);" + "%[tmp] <<= %[shift];" + "%[extr] = %[extr] | %[tmp];" + "%[mask1] = %[mask1] - %[mask2];" + ".Lloop_e:" + "%[shift] += 1;" + : [extr]"=&d"(extract), [shift]"=&d"(tmp_shift), [tmp]"=&d"(tmp), + [mask1]"=&d"(tmp_mask1), [mask2]"=&d"(tmp_mask2) + : [val]"d"(value), [rxmask]"d"(up->rxmask), [lc]"a"(up->csize) + : "ASTAT", "LB0", "LC0", "LT0" + ); + + pr_debug(" extract:%x\n", extract); + return extract; +} + +static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate) +{ + int tclkdiv, rclkdiv; + unsigned int sclk = get_sclk(); + + /* Set TCR1 and TCR2, TFSR is not enabled for uart */ + SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK)); + SPORT_PUT_TCR2(up, size + 1); + pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up)); + + /* Set RCR1 and RCR2 */ + SPORT_PUT_RCR1(up, (RCKFE | LARFS | LRFS | RFSR | IRCLK)); + SPORT_PUT_RCR2(up, (size + 1) * 2 - 1); + pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up)); + + tclkdiv = sclk / (2 * baud_rate) - 1; + /* The actual uart baud rate of devices vary between +/-2%. The sport + * RX sample rate should be faster than the double of the worst case, + * otherwise, wrong data are received. So, set sport RX clock to be + * 3% faster. + */ + rclkdiv = sclk / (2 * baud_rate * 2 * 97 / 100) - 1; + SPORT_PUT_TCLKDIV(up, tclkdiv); + SPORT_PUT_RCLKDIV(up, rclkdiv); + SSYNC(); + pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, rclkdiv:%d\n", + __func__, sclk, baud_rate, tclkdiv, rclkdiv); + + return 0; +} + +static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id) +{ + struct sport_uart_port *up = dev_id; + struct tty_struct *tty = up->port.state->port.tty; + unsigned int ch; + + spin_lock(&up->port.lock); + + while (SPORT_GET_STAT(up) & RXNE) { + ch = rx_one_byte(up); + up->port.icount.rx++; + + if (!uart_handle_sysrq_char(&up->port, ch)) + tty_insert_flip_char(tty, ch, TTY_NORMAL); + } + tty_flip_buffer_push(tty); + + spin_unlock(&up->port.lock); + + return IRQ_HANDLED; +} + +static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id) +{ + struct sport_uart_port *up = dev_id; + + spin_lock(&up->port.lock); + sport_uart_tx_chars(up); + spin_unlock(&up->port.lock); + + return IRQ_HANDLED; +} + +static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) +{ + struct sport_uart_port *up = dev_id; + struct tty_struct *tty = up->port.state->port.tty; + unsigned int stat = SPORT_GET_STAT(up); + + spin_lock(&up->port.lock); + + /* Overflow in RX FIFO */ + if (stat & ROVF) { + up->port.icount.overrun++; + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + SPORT_PUT_STAT(up, ROVF); /* Clear ROVF bit */ + } + /* These should not happen */ + if (stat & (TOVF | TUVF | RUVF)) { + pr_err("SPORT Error:%s %s %s\n", + (stat & TOVF) ? "TX overflow" : "", + (stat & TUVF) ? "TX underflow" : "", + (stat & RUVF) ? "RX underflow" : ""); + SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); + SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN); + } + SSYNC(); + + spin_unlock(&up->port.lock); + return IRQ_HANDLED; +} + +#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS +static unsigned int sport_get_mctrl(struct uart_port *port) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + if (up->cts_pin < 0) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + /* CTS PIN is negative assertive. */ + if (SPORT_UART_GET_CTS(up)) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + else + return TIOCM_DSR | TIOCM_CAR; +} + +static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + if (up->rts_pin < 0) + return; + + /* RTS PIN is negative assertive. */ + if (mctrl & TIOCM_RTS) + SPORT_UART_ENABLE_RTS(up); + else + SPORT_UART_DISABLE_RTS(up); +} + +/* + * Handle any change of modem status signal. + */ +static irqreturn_t sport_mctrl_cts_int(int irq, void *dev_id) +{ + struct sport_uart_port *up = (struct sport_uart_port *)dev_id; + unsigned int status; + + status = sport_get_mctrl(&up->port); + uart_handle_cts_change(&up->port, status & TIOCM_CTS); + + return IRQ_HANDLED; +} +#else +static unsigned int sport_get_mctrl(struct uart_port *port) +{ + pr_debug("%s enter\n", __func__); + return TIOCM_CTS | TIOCM_CD | TIOCM_DSR; +} + +static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + pr_debug("%s enter\n", __func__); +} +#endif + +/* Reqeust IRQ, Setup clock */ +static int sport_startup(struct uart_port *port) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + int ret; + + pr_debug("%s enter\n", __func__); + ret = request_irq(up->port.irq, sport_uart_rx_irq, 0, + "SPORT_UART_RX", up); + if (ret) { + dev_err(port->dev, "unable to request SPORT RX interrupt\n"); + return ret; + } + + ret = request_irq(up->port.irq+1, sport_uart_tx_irq, 0, + "SPORT_UART_TX", up); + if (ret) { + dev_err(port->dev, "unable to request SPORT TX interrupt\n"); + goto fail1; + } + + ret = request_irq(up->err_irq, sport_uart_err_irq, 0, + "SPORT_UART_STATUS", up); + if (ret) { + dev_err(port->dev, "unable to request SPORT status interrupt\n"); + goto fail2; + } + +#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS + if (up->cts_pin >= 0) { + if (request_irq(gpio_to_irq(up->cts_pin), + sport_mctrl_cts_int, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_DISABLED, "BFIN_SPORT_UART_CTS", up)) { + up->cts_pin = -1; + dev_info(port->dev, "Unable to attach BlackFin UART \ + over SPORT CTS interrupt. So, disable it.\n"); + } + } + if (up->rts_pin >= 0) + gpio_direction_output(up->rts_pin, 0); +#endif + + return 0; + fail2: + free_irq(up->port.irq+1, up); + fail1: + free_irq(up->port.irq, up); + + return ret; +} + +/* + * sport_uart_tx_chars + * + * ret 1 means need to enable sport. + * ret 0 means do nothing. + */ +static int sport_uart_tx_chars(struct sport_uart_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + + if (SPORT_GET_STAT(up) & TXF) + return 0; + + if (up->port.x_char) { + tx_one_byte(up, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return 1; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + /* The waiting loop to stop SPORT TX from TX interrupt is + * too long. This may block SPORT RX interrupts and cause + * RX FIFO overflow. So, do stop sport TX only after the last + * char in TX FIFO is moved into the shift register. + */ + if (SPORT_GET_STAT(up) & TXHRE) + sport_stop_tx(&up->port); + return 0; + } + + while(!(SPORT_GET_STAT(up) & TXF) && !uart_circ_empty(xmit)) { + tx_one_byte(up, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1); + up->port.icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + return 1; +} + +static unsigned int sport_tx_empty(struct uart_port *port) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + unsigned int stat; + + stat = SPORT_GET_STAT(up); + pr_debug("%s stat:%04x\n", __func__, stat); + if (stat & TXHRE) { + return TIOCSER_TEMT; + } else + return 0; +} + +static void sport_stop_tx(struct uart_port *port) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + pr_debug("%s enter\n", __func__); + + if (!(SPORT_GET_TCR1(up) & TSPEN)) + return; + + /* Although the hold register is empty, last byte is still in shift + * register and not sent out yet. So, put a dummy data into TX FIFO. + * Then, sport tx stops when last byte is shift out and the dummy + * data is moved into the shift register. + */ + SPORT_PUT_TX(up, 0xffff); + while (!(SPORT_GET_STAT(up) & TXHRE)) + cpu_relax(); + + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); + SSYNC(); + + return; +} + +static void sport_start_tx(struct uart_port *port) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + pr_debug("%s enter\n", __func__); + + /* Write data into SPORT FIFO before enable SPROT to transmit */ + if (sport_uart_tx_chars(up)) { + /* Enable transmit, then an interrupt will generated */ + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); + SSYNC(); + } + + pr_debug("%s exit\n", __func__); +} + +static void sport_stop_rx(struct uart_port *port) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + pr_debug("%s enter\n", __func__); + /* Disable sport to stop rx */ + SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN)); + SSYNC(); +} + +static void sport_enable_ms(struct uart_port *port) +{ + pr_debug("%s enter\n", __func__); +} + +static void sport_break_ctl(struct uart_port *port, int break_state) +{ + pr_debug("%s enter\n", __func__); +} + +static void sport_shutdown(struct uart_port *port) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + dev_dbg(port->dev, "%s enter\n", __func__); + + /* Disable sport */ + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); + SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN)); + SSYNC(); + + free_irq(up->port.irq, up); + free_irq(up->port.irq+1, up); + free_irq(up->err_irq, up); +#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS + if (up->cts_pin >= 0) + free_irq(gpio_to_irq(up->cts_pin), up); +#endif +} + +static const char *sport_type(struct uart_port *port) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + pr_debug("%s enter\n", __func__); + return up->port.type == PORT_BFIN_SPORT ? "BFIN-SPORT-UART" : NULL; +} + +static void sport_release_port(struct uart_port *port) +{ + pr_debug("%s enter\n", __func__); +} + +static int sport_request_port(struct uart_port *port) +{ + pr_debug("%s enter\n", __func__); + return 0; +} + +static void sport_config_port(struct uart_port *port, int flags) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + pr_debug("%s enter\n", __func__); + up->port.type = PORT_BFIN_SPORT; +} + +static int sport_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + pr_debug("%s enter\n", __func__); + return 0; +} + +static void sport_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + unsigned long flags; + int i; + + pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag); + + switch (termios->c_cflag & CSIZE) { + case CS8: + up->csize = 8; + break; + case CS7: + up->csize = 7; + break; + case CS6: + up->csize = 6; + break; + case CS5: + up->csize = 5; + break; + default: + pr_warning("requested word length not supported\n"); + } + + if (termios->c_cflag & CSTOPB) { + up->stopb = 1; + } + if (termios->c_cflag & PARENB) { + pr_warning("PAREN bits is not supported yet\n"); + /* up->parib = 1; */ + } + + spin_lock_irqsave(&up->port.lock, flags); + + port->read_status_mask = 0; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + + /* RX extract mask */ + up->rxmask = 0x01 | (((up->csize + up->stopb) * 2 - 1) << 0x8); + /* TX masks, 8 bit data and 1 bit stop for example: + * mask1 = b#0111111110 + * mask2 = b#1000000000 + */ + for (i = 0, up->txmask1 = 0; i < up->csize; i++) + up->txmask1 |= (1<txmask2 = (1<stopb) { + ++i; + up->txmask2 |= (1<txmask1 <<= 1; + up->txmask2 <<= 1; + /* uart baud rate */ + port->uartclk = uart_get_baud_rate(port, termios, old, 0, get_sclk()/16); + + /* Disable UART */ + SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); + SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN); + + sport_uart_setup(up, up->csize + up->stopb, port->uartclk); + + /* driver TX line high after config, one dummy data is + * necessary to stop sport after shift one byte + */ + SPORT_PUT_TX(up, 0xffff); + SPORT_PUT_TX(up, 0xffff); + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); + SSYNC(); + while (!(SPORT_GET_STAT(up) & TXHRE)) + cpu_relax(); + SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); + SSYNC(); + + /* Port speed changed, update the per-port timeout. */ + uart_update_timeout(port, termios->c_cflag, port->uartclk); + + /* Enable sport rx */ + SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) | RSPEN); + SSYNC(); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +struct uart_ops sport_uart_ops = { + .tx_empty = sport_tx_empty, + .set_mctrl = sport_set_mctrl, + .get_mctrl = sport_get_mctrl, + .stop_tx = sport_stop_tx, + .start_tx = sport_start_tx, + .stop_rx = sport_stop_rx, + .enable_ms = sport_enable_ms, + .break_ctl = sport_break_ctl, + .startup = sport_startup, + .shutdown = sport_shutdown, + .set_termios = sport_set_termios, + .type = sport_type, + .release_port = sport_release_port, + .request_port = sport_request_port, + .config_port = sport_config_port, + .verify_port = sport_verify_port, +}; + +#define BFIN_SPORT_UART_MAX_PORTS 4 + +static struct sport_uart_port *bfin_sport_uart_ports[BFIN_SPORT_UART_MAX_PORTS]; + +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE +#define CLASS_BFIN_SPORT_CONSOLE "bfin-sport-console" + +static int __init +sport_uart_console_setup(struct console *co, char *options) +{ + struct sport_uart_port *up; + int baud = 57600; + int bits = 8; + int parity = 'n'; +# ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS + int flow = 'r'; +# else + int flow = 'n'; +# endif + + /* Check whether an invalid uart number has been specified */ + if (co->index < 0 || co->index >= BFIN_SPORT_UART_MAX_PORTS) + return -ENODEV; + + up = bfin_sport_uart_ports[co->index]; + if (!up) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&up->port, co, baud, parity, bits, flow); +} + +static void sport_uart_console_putchar(struct uart_port *port, int ch) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + while (SPORT_GET_STAT(up) & TXF) + barrier(); + + tx_one_byte(up, ch); +} + +/* + * Interrupts are disabled on entering + */ +static void +sport_uart_console_write(struct console *co, const char *s, unsigned int count) +{ + struct sport_uart_port *up = bfin_sport_uart_ports[co->index]; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + if (SPORT_GET_TCR1(up) & TSPEN) + uart_console_write(&up->port, s, count, sport_uart_console_putchar); + else { + /* dummy data to start sport */ + while (SPORT_GET_STAT(up) & TXF) + barrier(); + SPORT_PUT_TX(up, 0xffff); + /* Enable transmit, then an interrupt will generated */ + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); + SSYNC(); + + uart_console_write(&up->port, s, count, sport_uart_console_putchar); + + /* Although the hold register is empty, last byte is still in shift + * register and not sent out yet. So, put a dummy data into TX FIFO. + * Then, sport tx stops when last byte is shift out and the dummy + * data is moved into the shift register. + */ + while (SPORT_GET_STAT(up) & TXF) + barrier(); + SPORT_PUT_TX(up, 0xffff); + while (!(SPORT_GET_STAT(up) & TXHRE)) + barrier(); + + /* Stop sport tx transfer */ + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); + SSYNC(); + } + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static struct uart_driver sport_uart_reg; + +static struct console sport_uart_console = { + .name = DEVICE_NAME, + .write = sport_uart_console_write, + .device = uart_console_device, + .setup = sport_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sport_uart_reg, +}; + +#define SPORT_UART_CONSOLE (&sport_uart_console) +#else +#define SPORT_UART_CONSOLE NULL +#endif /* CONFIG_SERIAL_BFIN_SPORT_CONSOLE */ + + +static struct uart_driver sport_uart_reg = { + .owner = THIS_MODULE, + .driver_name = DRV_NAME, + .dev_name = DEVICE_NAME, + .major = 204, + .minor = 84, + .nr = BFIN_SPORT_UART_MAX_PORTS, + .cons = SPORT_UART_CONSOLE, +}; + +#ifdef CONFIG_PM +static int sport_uart_suspend(struct device *dev) +{ + struct sport_uart_port *sport = dev_get_drvdata(dev); + + dev_dbg(dev, "%s enter\n", __func__); + if (sport) + uart_suspend_port(&sport_uart_reg, &sport->port); + + return 0; +} + +static int sport_uart_resume(struct device *dev) +{ + struct sport_uart_port *sport = dev_get_drvdata(dev); + + dev_dbg(dev, "%s enter\n", __func__); + if (sport) + uart_resume_port(&sport_uart_reg, &sport->port); + + return 0; +} + +static struct dev_pm_ops bfin_sport_uart_dev_pm_ops = { + .suspend = sport_uart_suspend, + .resume = sport_uart_resume, +}; +#endif + +static int __devinit sport_uart_probe(struct platform_device *pdev) +{ + struct resource *res; + struct sport_uart_port *sport; + int ret = 0; + + dev_dbg(&pdev->dev, "%s enter\n", __func__); + + if (pdev->id < 0 || pdev->id >= BFIN_SPORT_UART_MAX_PORTS) { + dev_err(&pdev->dev, "Wrong sport uart platform device id.\n"); + return -ENOENT; + } + + if (bfin_sport_uart_ports[pdev->id] == NULL) { + bfin_sport_uart_ports[pdev->id] = + kzalloc(sizeof(struct sport_uart_port), GFP_KERNEL); + sport = bfin_sport_uart_ports[pdev->id]; + if (!sport) { + dev_err(&pdev->dev, + "Fail to malloc sport_uart_port\n"); + return -ENOMEM; + } + + ret = peripheral_request_list( + (unsigned short *)pdev->dev.platform_data, DRV_NAME); + if (ret) { + dev_err(&pdev->dev, + "Fail to request SPORT peripherals\n"); + goto out_error_free_mem; + } + + spin_lock_init(&sport->port.lock); + sport->port.fifosize = SPORT_TX_FIFO_SIZE, + sport->port.ops = &sport_uart_ops; + sport->port.line = pdev->id; + sport->port.iotype = UPIO_MEM; + sport->port.flags = UPF_BOOT_AUTOCONF; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); + ret = -ENOENT; + goto out_error_free_peripherals; + } + + sport->port.membase = ioremap(res->start, resource_size(res)); + if (!sport->port.membase) { + dev_err(&pdev->dev, "Cannot map sport IO\n"); + ret = -ENXIO; + goto out_error_free_peripherals; + } + sport->port.mapbase = res->start; + + sport->port.irq = platform_get_irq(pdev, 0); + if (sport->port.irq < 0) { + dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + + sport->err_irq = platform_get_irq(pdev, 1); + if (sport->err_irq < 0) { + dev_err(&pdev->dev, "No sport status IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } +#ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) + sport->cts_pin = -1; + else + sport->cts_pin = res->start; + + res = platform_get_resource(pdev, IORESOURCE_IO, 1); + if (res == NULL) + sport->rts_pin = -1; + else + sport->rts_pin = res->start; + + if (sport->rts_pin >= 0) + gpio_request(sport->rts_pin, DRV_NAME); +#endif + } + +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE + if (!is_early_platform_device(pdev)) { +#endif + sport = bfin_sport_uart_ports[pdev->id]; + sport->port.dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, sport); + ret = uart_add_one_port(&sport_uart_reg, &sport->port); +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE + } +#endif + if (!ret) + return 0; + + if (sport) { +out_error_unmap: + iounmap(sport->port.membase); +out_error_free_peripherals: + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); +out_error_free_mem: + kfree(sport); + bfin_sport_uart_ports[pdev->id] = NULL; + } + + return ret; +} + +static int __devexit sport_uart_remove(struct platform_device *pdev) +{ + struct sport_uart_port *sport = platform_get_drvdata(pdev); + + dev_dbg(&pdev->dev, "%s enter\n", __func__); + dev_set_drvdata(&pdev->dev, NULL); + + if (sport) { + uart_remove_one_port(&sport_uart_reg, &sport->port); +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (sport->rts_pin >= 0) + gpio_free(sport->rts_pin); +#endif + iounmap(sport->port.membase); + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); + kfree(sport); + bfin_sport_uart_ports[pdev->id] = NULL; + } + + return 0; +} + +static struct platform_driver sport_uart_driver = { + .probe = sport_uart_probe, + .remove = __devexit_p(sport_uart_remove), + .driver = { + .name = DRV_NAME, +#ifdef CONFIG_PM + .pm = &bfin_sport_uart_dev_pm_ops, +#endif + }, +}; + +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE +static __initdata struct early_platform_driver early_sport_uart_driver = { + .class_str = CLASS_BFIN_SPORT_CONSOLE, + .pdrv = &sport_uart_driver, + .requested_id = EARLY_PLATFORM_ID_UNSET, +}; + +static int __init sport_uart_rs_console_init(void) +{ + early_platform_driver_register(&early_sport_uart_driver, DRV_NAME); + + early_platform_driver_probe(CLASS_BFIN_SPORT_CONSOLE, + BFIN_SPORT_UART_MAX_PORTS, 0); + + register_console(&sport_uart_console); + + return 0; +} +console_initcall(sport_uart_rs_console_init); +#endif + +static int __init sport_uart_init(void) +{ + int ret; + + pr_info("Blackfin uart over sport driver\n"); + + ret = uart_register_driver(&sport_uart_reg); + if (ret) { + pr_err("failed to register %s:%d\n", + sport_uart_reg.driver_name, ret); + return ret; + } + + ret = platform_driver_register(&sport_uart_driver); + if (ret) { + pr_err("failed to register sport uart driver:%d\n", ret); + uart_unregister_driver(&sport_uart_reg); + } + + return ret; +} +module_init(sport_uart_init); + +static void __exit sport_uart_exit(void) +{ + platform_driver_unregister(&sport_uart_driver); + uart_unregister_driver(&sport_uart_reg); +} +module_exit(sport_uart_exit); + +MODULE_AUTHOR("Sonic Zhang, Roy Huang"); +MODULE_DESCRIPTION("Blackfin serial over SPORT driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/bfin_sport_uart.h b/drivers/tty/serial/bfin_sport_uart.h new file mode 100644 index 000000000000..6d06ce1d5675 --- /dev/null +++ b/drivers/tty/serial/bfin_sport_uart.h @@ -0,0 +1,86 @@ +/* + * Blackfin On-Chip Sport Emulated UART Driver + * + * Copyright 2006-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +/* + * This driver and the hardware supported are in term of EE-191 of ADI. + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf + * This application note describe how to implement a UART on a Sharc DSP, + * but this driver is implemented on Blackfin Processor. + * Transmit Frame Sync is not used by this driver to transfer data out. + */ + +#ifndef _BFIN_SPORT_UART_H +#define _BFIN_SPORT_UART_H + +#define OFFSET_TCR1 0x00 /* Transmit Configuration 1 Register */ +#define OFFSET_TCR2 0x04 /* Transmit Configuration 2 Register */ +#define OFFSET_TCLKDIV 0x08 /* Transmit Serial Clock Divider Register */ +#define OFFSET_TFSDIV 0x0C /* Transmit Frame Sync Divider Register */ +#define OFFSET_TX 0x10 /* Transmit Data Register */ +#define OFFSET_RX 0x18 /* Receive Data Register */ +#define OFFSET_RCR1 0x20 /* Receive Configuration 1 Register */ +#define OFFSET_RCR2 0x24 /* Receive Configuration 2 Register */ +#define OFFSET_RCLKDIV 0x28 /* Receive Serial Clock Divider Register */ +#define OFFSET_RFSDIV 0x2c /* Receive Frame Sync Divider Register */ +#define OFFSET_STAT 0x30 /* Status Register */ + +#define SPORT_GET_TCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR1)) +#define SPORT_GET_TCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_TCR2)) +#define SPORT_GET_TCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TCLKDIV)) +#define SPORT_GET_TFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_TFSDIV)) +#define SPORT_GET_TX(sport) bfin_read16(((sport)->port.membase + OFFSET_TX)) +#define SPORT_GET_RX(sport) bfin_read16(((sport)->port.membase + OFFSET_RX)) +/* + * If another interrupt fires while doing a 32-bit read from RX FIFO, + * a fake RX underflow error will be generated. So disable interrupts + * to prevent interruption while reading the FIFO. + */ +#define SPORT_GET_RX32(sport) \ +({ \ + unsigned int __ret; \ + if (ANOMALY_05000473) \ + local_irq_disable(); \ + __ret = bfin_read32((sport)->port.membase + OFFSET_RX); \ + if (ANOMALY_05000473) \ + local_irq_enable(); \ + __ret; \ +}) +#define SPORT_GET_RCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR1)) +#define SPORT_GET_RCR2(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR2)) +#define SPORT_GET_RCLKDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RCLKDIV)) +#define SPORT_GET_RFSDIV(sport) bfin_read16(((sport)->port.membase + OFFSET_RFSDIV)) +#define SPORT_GET_STAT(sport) bfin_read16(((sport)->port.membase + OFFSET_STAT)) + +#define SPORT_PUT_TCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR1), v) +#define SPORT_PUT_TCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCR2), v) +#define SPORT_PUT_TCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TCLKDIV), v) +#define SPORT_PUT_TFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TFSDIV), v) +#define SPORT_PUT_TX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_TX), v) +#define SPORT_PUT_RX(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RX), v) +#define SPORT_PUT_RCR1(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR1), v) +#define SPORT_PUT_RCR2(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCR2), v) +#define SPORT_PUT_RCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCLKDIV), v) +#define SPORT_PUT_RFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RFSDIV), v) +#define SPORT_PUT_STAT(sport, v) bfin_write16(((sport)->port.membase + OFFSET_STAT), v) + +#define SPORT_TX_FIFO_SIZE 8 + +#define SPORT_UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define SPORT_UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) +#define SPORT_UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) + +#if defined(CONFIG_SERIAL_BFIN_SPORT0_UART_CTSRTS) \ + || defined(CONFIG_SERIAL_BFIN_SPORT1_UART_CTSRTS) \ + || defined(CONFIG_SERIAL_BFIN_SPORT2_UART_CTSRTS) \ + || defined(CONFIG_SERIAL_BFIN_SPORT3_UART_CTSRTS) +# define CONFIG_SERIAL_BFIN_SPORT_CTSRTS +#endif + +#endif /* _BFIN_SPORT_UART_H */ diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c new file mode 100644 index 000000000000..b6acd19b458e --- /dev/null +++ b/drivers/tty/serial/clps711x.c @@ -0,0 +1,579 @@ +/* + * linux/drivers/char/clps711x.c + * + * Driver for CLPS711x serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define UART_NR 2 + +#define SERIAL_CLPS711X_MAJOR 204 +#define SERIAL_CLPS711X_MINOR 40 +#define SERIAL_CLPS711X_NR UART_NR + +/* + * We use the relevant SYSCON register as a base address for these ports. + */ +#define UBRLCR(port) ((port)->iobase + UBRLCR1 - SYSCON1) +#define UARTDR(port) ((port)->iobase + UARTDR1 - SYSCON1) +#define SYSFLG(port) ((port)->iobase + SYSFLG1 - SYSCON1) +#define SYSCON(port) ((port)->iobase + SYSCON1 - SYSCON1) + +#define TX_IRQ(port) ((port)->irq) +#define RX_IRQ(port) ((port)->irq + 1) + +#define UART_ANY_ERR (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR) + +#define tx_enabled(port) ((port)->unused[0]) + +static void clps711xuart_stop_tx(struct uart_port *port) +{ + if (tx_enabled(port)) { + disable_irq(TX_IRQ(port)); + tx_enabled(port) = 0; + } +} + +static void clps711xuart_start_tx(struct uart_port *port) +{ + if (!tx_enabled(port)) { + enable_irq(TX_IRQ(port)); + tx_enabled(port) = 1; + } +} + +static void clps711xuart_stop_rx(struct uart_port *port) +{ + disable_irq(RX_IRQ(port)); +} + +static void clps711xuart_enable_ms(struct uart_port *port) +{ +} + +static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct tty_struct *tty = port->state->port.tty; + unsigned int status, ch, flg; + + status = clps_readl(SYSFLG(port)); + while (!(status & SYSFLG_URXFE)) { + ch = clps_readl(UARTDR(port)); + + port->icount.rx++; + + flg = TTY_NORMAL; + + /* + * Note that the error handling code is + * out of the main execution path + */ + if (unlikely(ch & UART_ANY_ERR)) { + if (ch & UARTDR_PARERR) + port->icount.parity++; + else if (ch & UARTDR_FRMERR) + port->icount.frame++; + if (ch & UARTDR_OVERR) + port->icount.overrun++; + + ch &= port->read_status_mask; + + if (ch & UARTDR_PARERR) + flg = TTY_PARITY; + else if (ch & UARTDR_FRMERR) + flg = TTY_FRAME; + +#ifdef SUPPORT_SYSRQ + port->sysrq = 0; +#endif + } + + if (uart_handle_sysrq_char(port, ch)) + goto ignore_char; + + /* + * CHECK: does overrun affect the current character? + * ASSUMPTION: it does not. + */ + uart_insert_char(port, ch, UARTDR_OVERR, ch, flg); + + ignore_char: + status = clps_readl(SYSFLG(port)); + } + tty_flip_buffer_push(tty); + return IRQ_HANDLED; +} + +static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct circ_buf *xmit = &port->state->xmit; + int count; + + if (port->x_char) { + clps_writel(port->x_char, UARTDR(port)); + port->icount.tx++; + port->x_char = 0; + return IRQ_HANDLED; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + clps711xuart_stop_tx(port); + return IRQ_HANDLED; + } + + count = port->fifosize >> 1; + do { + clps_writel(xmit->buf[xmit->tail], UARTDR(port)); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + clps711xuart_stop_tx(port); + + return IRQ_HANDLED; +} + +static unsigned int clps711xuart_tx_empty(struct uart_port *port) +{ + unsigned int status = clps_readl(SYSFLG(port)); + return status & SYSFLG_UBUSY ? 0 : TIOCSER_TEMT; +} + +static unsigned int clps711xuart_get_mctrl(struct uart_port *port) +{ + unsigned int port_addr; + unsigned int result = 0; + unsigned int status; + + port_addr = SYSFLG(port); + if (port_addr == SYSFLG1) { + status = clps_readl(SYSFLG1); + if (status & SYSFLG1_DCD) + result |= TIOCM_CAR; + if (status & SYSFLG1_DSR) + result |= TIOCM_DSR; + if (status & SYSFLG1_CTS) + result |= TIOCM_CTS; + } + + return result; +} + +static void +clps711xuart_set_mctrl_null(struct uart_port *port, unsigned int mctrl) +{ +} + +static void clps711xuart_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + unsigned int ubrlcr; + + spin_lock_irqsave(&port->lock, flags); + ubrlcr = clps_readl(UBRLCR(port)); + if (break_state == -1) + ubrlcr |= UBRLCR_BREAK; + else + ubrlcr &= ~UBRLCR_BREAK; + clps_writel(ubrlcr, UBRLCR(port)); + spin_unlock_irqrestore(&port->lock, flags); +} + +static int clps711xuart_startup(struct uart_port *port) +{ + unsigned int syscon; + int retval; + + tx_enabled(port) = 1; + + /* + * Allocate the IRQs + */ + retval = request_irq(TX_IRQ(port), clps711xuart_int_tx, 0, + "clps711xuart_tx", port); + if (retval) + return retval; + + retval = request_irq(RX_IRQ(port), clps711xuart_int_rx, 0, + "clps711xuart_rx", port); + if (retval) { + free_irq(TX_IRQ(port), port); + return retval; + } + + /* + * enable the port + */ + syscon = clps_readl(SYSCON(port)); + syscon |= SYSCON_UARTEN; + clps_writel(syscon, SYSCON(port)); + + return 0; +} + +static void clps711xuart_shutdown(struct uart_port *port) +{ + unsigned int ubrlcr, syscon; + + /* + * Free the interrupt + */ + free_irq(TX_IRQ(port), port); /* TX interrupt */ + free_irq(RX_IRQ(port), port); /* RX interrupt */ + + /* + * disable the port + */ + syscon = clps_readl(SYSCON(port)); + syscon &= ~SYSCON_UARTEN; + clps_writel(syscon, SYSCON(port)); + + /* + * disable break condition and fifos + */ + ubrlcr = clps_readl(UBRLCR(port)); + ubrlcr &= ~(UBRLCR_FIFOEN | UBRLCR_BREAK); + clps_writel(ubrlcr, UBRLCR(port)); +} + +static void +clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int ubrlcr, baud, quot; + unsigned long flags; + + /* + * We don't implement CREAD. + */ + termios->c_cflag |= CREAD; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + switch (termios->c_cflag & CSIZE) { + case CS5: + ubrlcr = UBRLCR_WRDLEN5; + break; + case CS6: + ubrlcr = UBRLCR_WRDLEN6; + break; + case CS7: + ubrlcr = UBRLCR_WRDLEN7; + break; + default: // CS8 + ubrlcr = UBRLCR_WRDLEN8; + break; + } + if (termios->c_cflag & CSTOPB) + ubrlcr |= UBRLCR_XSTOP; + if (termios->c_cflag & PARENB) { + ubrlcr |= UBRLCR_PRTEN; + if (!(termios->c_cflag & PARODD)) + ubrlcr |= UBRLCR_EVENPRT; + } + if (port->fifosize > 1) + ubrlcr |= UBRLCR_FIFOEN; + + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = UARTDR_OVERR; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UARTDR_FRMERR | UARTDR_PARERR; + if (termios->c_iflag & IGNBRK) { + /* + * If we're ignoring parity and break indicators, + * ignore overruns to (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UARTDR_OVERR; + } + + quot -= 1; + + clps_writel(ubrlcr | quot, UBRLCR(port)); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *clps711xuart_type(struct uart_port *port) +{ + return port->type == PORT_CLPS711X ? "CLPS711x" : NULL; +} + +/* + * Configure/autoconfigure the port. + */ +static void clps711xuart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_CLPS711X; +} + +static void clps711xuart_release_port(struct uart_port *port) +{ +} + +static int clps711xuart_request_port(struct uart_port *port) +{ + return 0; +} + +static struct uart_ops clps711x_pops = { + .tx_empty = clps711xuart_tx_empty, + .set_mctrl = clps711xuart_set_mctrl_null, + .get_mctrl = clps711xuart_get_mctrl, + .stop_tx = clps711xuart_stop_tx, + .start_tx = clps711xuart_start_tx, + .stop_rx = clps711xuart_stop_rx, + .enable_ms = clps711xuart_enable_ms, + .break_ctl = clps711xuart_break_ctl, + .startup = clps711xuart_startup, + .shutdown = clps711xuart_shutdown, + .set_termios = clps711xuart_set_termios, + .type = clps711xuart_type, + .config_port = clps711xuart_config_port, + .release_port = clps711xuart_release_port, + .request_port = clps711xuart_request_port, +}; + +static struct uart_port clps711x_ports[UART_NR] = { + { + .iobase = SYSCON1, + .irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */ + .uartclk = 3686400, + .fifosize = 16, + .ops = &clps711x_pops, + .line = 0, + .flags = UPF_BOOT_AUTOCONF, + }, + { + .iobase = SYSCON2, + .irq = IRQ_UTXINT2, /* IRQ_URXINT2 */ + .uartclk = 3686400, + .fifosize = 16, + .ops = &clps711x_pops, + .line = 1, + .flags = UPF_BOOT_AUTOCONF, + } +}; + +#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE +static void clps711xuart_console_putchar(struct uart_port *port, int ch) +{ + while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF) + barrier(); + clps_writel(ch, UARTDR(port)); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + * + * Note that this is called with interrupts already disabled + */ +static void +clps711xuart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = clps711x_ports + co->index; + unsigned int status, syscon; + + /* + * Ensure that the port is enabled. + */ + syscon = clps_readl(SYSCON(port)); + clps_writel(syscon | SYSCON_UARTEN, SYSCON(port)); + + uart_console_write(port, s, count, clps711xuart_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the uart state. + */ + do { + status = clps_readl(SYSFLG(port)); + } while (status & SYSFLG_UBUSY); + + clps_writel(syscon, SYSCON(port)); +} + +static void __init +clps711xuart_console_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) { + unsigned int ubrlcr, quot; + + ubrlcr = clps_readl(UBRLCR(port)); + + *parity = 'n'; + if (ubrlcr & UBRLCR_PRTEN) { + if (ubrlcr & UBRLCR_EVENPRT) + *parity = 'e'; + else + *parity = 'o'; + } + + if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7) + *bits = 7; + else + *bits = 8; + + quot = ubrlcr & UBRLCR_BAUD_MASK; + *baud = port->uartclk / (16 * (quot + 1)); + } +} + +static int __init clps711xuart_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + port = uart_get_console(clps711x_ports, UART_NR, co); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + clps711xuart_console_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver clps711x_reg; +static struct console clps711x_console = { + .name = "ttyCL", + .write = clps711xuart_console_write, + .device = uart_console_device, + .setup = clps711xuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &clps711x_reg, +}; + +static int __init clps711xuart_console_init(void) +{ + register_console(&clps711x_console); + return 0; +} +console_initcall(clps711xuart_console_init); + +#define CLPS711X_CONSOLE &clps711x_console +#else +#define CLPS711X_CONSOLE NULL +#endif + +static struct uart_driver clps711x_reg = { + .driver_name = "ttyCL", + .dev_name = "ttyCL", + .major = SERIAL_CLPS711X_MAJOR, + .minor = SERIAL_CLPS711X_MINOR, + .nr = UART_NR, + + .cons = CLPS711X_CONSOLE, +}; + +static int __init clps711xuart_init(void) +{ + int ret, i; + + printk(KERN_INFO "Serial: CLPS711x driver\n"); + + ret = uart_register_driver(&clps711x_reg); + if (ret) + return ret; + + for (i = 0; i < UART_NR; i++) + uart_add_one_port(&clps711x_reg, &clps711x_ports[i]); + + return 0; +} + +static void __exit clps711xuart_exit(void) +{ + int i; + + for (i = 0; i < UART_NR; i++) + uart_remove_one_port(&clps711x_reg, &clps711x_ports[i]); + + uart_unregister_driver(&clps711x_reg); +} + +module_init(clps711xuart_init); +module_exit(clps711xuart_exit); + +MODULE_AUTHOR("Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("CLPS-711x generic serial driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV(SERIAL_CLPS711X_MAJOR, SERIAL_CLPS711X_MINOR); diff --git a/drivers/tty/serial/cpm_uart/Makefile b/drivers/tty/serial/cpm_uart/Makefile new file mode 100644 index 000000000000..e072724ea754 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the Motorola 8xx FEC ethernet controller +# + +obj-$(CONFIG_SERIAL_CPM) += cpm_uart.o + +# Select the correct platform objects. +cpm_uart-objs-$(CONFIG_CPM2) += cpm_uart_cpm2.o +cpm_uart-objs-$(CONFIG_8xx) += cpm_uart_cpm1.o + +cpm_uart-objs := cpm_uart_core.o $(cpm_uart-objs-y) diff --git a/drivers/tty/serial/cpm_uart/cpm_uart.h b/drivers/tty/serial/cpm_uart/cpm_uart.h new file mode 100644 index 000000000000..b754dcf0fda5 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart.h @@ -0,0 +1,147 @@ +/* + * linux/drivers/serial/cpm_uart.h + * + * Driver for CPM (SCC/SMC) serial ports + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ +#ifndef CPM_UART_H +#define CPM_UART_H + +#include +#include + +#if defined(CONFIG_CPM2) +#include "cpm_uart_cpm2.h" +#elif defined(CONFIG_8xx) +#include "cpm_uart_cpm1.h" +#endif + +#define SERIAL_CPM_MAJOR 204 +#define SERIAL_CPM_MINOR 46 + +#define IS_SMC(pinfo) (pinfo->flags & FLAG_SMC) +#define IS_DISCARDING(pinfo) (pinfo->flags & FLAG_DISCARDING) +#define FLAG_DISCARDING 0x00000004 /* when set, don't discard */ +#define FLAG_SMC 0x00000002 +#define FLAG_CONSOLE 0x00000001 + +#define UART_SMC1 fsid_smc1_uart +#define UART_SMC2 fsid_smc2_uart +#define UART_SCC1 fsid_scc1_uart +#define UART_SCC2 fsid_scc2_uart +#define UART_SCC3 fsid_scc3_uart +#define UART_SCC4 fsid_scc4_uart + +#define UART_NR fs_uart_nr + +#define RX_NUM_FIFO 4 +#define RX_BUF_SIZE 32 +#define TX_NUM_FIFO 4 +#define TX_BUF_SIZE 32 + +#define SCC_WAIT_CLOSING 100 + +#define GPIO_CTS 0 +#define GPIO_RTS 1 +#define GPIO_DCD 2 +#define GPIO_DSR 3 +#define GPIO_DTR 4 +#define GPIO_RI 5 + +#define NUM_GPIOS (GPIO_RI+1) + +struct uart_cpm_port { + struct uart_port port; + u16 rx_nrfifos; + u16 rx_fifosize; + u16 tx_nrfifos; + u16 tx_fifosize; + smc_t __iomem *smcp; + smc_uart_t __iomem *smcup; + scc_t __iomem *sccp; + scc_uart_t __iomem *sccup; + cbd_t __iomem *rx_bd_base; + cbd_t __iomem *rx_cur; + cbd_t __iomem *tx_bd_base; + cbd_t __iomem *tx_cur; + unsigned char *tx_buf; + unsigned char *rx_buf; + u32 flags; + struct clk *clk; + u8 brg; + uint dp_addr; + void *mem_addr; + dma_addr_t dma_addr; + u32 mem_size; + /* wait on close if needed */ + int wait_closing; + /* value to combine with opcode to form cpm command */ + u32 command; + int gpios[NUM_GPIOS]; +}; + +extern int cpm_uart_nr; +extern struct uart_cpm_port cpm_uart_ports[UART_NR]; + +/* these are located in their respective files */ +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd); +void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, + struct device_node *np); +void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram); +int cpm_uart_init_portdesc(void); +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con); +void cpm_uart_freebuf(struct uart_cpm_port *pinfo); + +void smc1_lineif(struct uart_cpm_port *pinfo); +void smc2_lineif(struct uart_cpm_port *pinfo); +void scc1_lineif(struct uart_cpm_port *pinfo); +void scc2_lineif(struct uart_cpm_port *pinfo); +void scc3_lineif(struct uart_cpm_port *pinfo); +void scc4_lineif(struct uart_cpm_port *pinfo); + +/* + virtual to phys transtalion +*/ +static inline unsigned long cpu2cpm_addr(void *addr, + struct uart_cpm_port *pinfo) +{ + int offset; + u32 val = (u32)addr; + u32 mem = (u32)pinfo->mem_addr; + /* sane check */ + if (likely(val >= mem && val < mem + pinfo->mem_size)) { + offset = val - mem; + return pinfo->dma_addr + offset; + } + /* something nasty happened */ + BUG(); + return 0; +} + +static inline void *cpm2cpu_addr(unsigned long addr, + struct uart_cpm_port *pinfo) +{ + int offset; + u32 val = addr; + u32 dma = (u32)pinfo->dma_addr; + /* sane check */ + if (likely(val >= dma && val < dma + pinfo->mem_size)) { + offset = val - dma; + return pinfo->mem_addr + offset; + } + /* something nasty happened */ + BUG(); + return NULL; +} + + +#endif /* CPM_UART_H */ diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c new file mode 100644 index 000000000000..8692ff98fc07 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c @@ -0,0 +1,1443 @@ +/* + * linux/drivers/serial/cpm_uart.c + * + * Driver for CPM (SCC/SMC) serial ports; core driver + * + * Based on arch/ppc/cpm2_io/uart.c by Dan Malek + * Based on ppc8xx.c by Thomas Gleixner + * Based on drivers/serial/amba.c by Russell King + * + * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) + * Pantelis Antoniou (panto@intracom.gr) (CPM1) + * + * Copyright (C) 2004, 2007 Freescale Semiconductor, Inc. + * (C) 2004 Intracom, S.A. + * (C) 2005-2006 MontaVista Software, Inc. + * Vitaly Bordug + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include + +#include "cpm_uart.h" + + +/**************************************************************/ + +static int cpm_uart_tx_pump(struct uart_port *port); +static void cpm_uart_init_smc(struct uart_cpm_port *pinfo); +static void cpm_uart_init_scc(struct uart_cpm_port *pinfo); +static void cpm_uart_initbd(struct uart_cpm_port *pinfo); + +/**************************************************************/ + +#define HW_BUF_SPD_THRESHOLD 9600 + +/* + * Check, if transmit buffers are processed +*/ +static unsigned int cpm_uart_tx_empty(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + cbd_t __iomem *bdp = pinfo->tx_bd_base; + int ret = 0; + + while (1) { + if (in_be16(&bdp->cbd_sc) & BD_SC_READY) + break; + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) { + ret = TIOCSER_TEMT; + break; + } + bdp++; + } + + pr_debug("CPM uart[%d]:tx_empty: %d\n", port->line, ret); + + return ret; +} + +static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (pinfo->gpios[GPIO_RTS] >= 0) + gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS)); + + if (pinfo->gpios[GPIO_DTR] >= 0) + gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR)); +} + +static unsigned int cpm_uart_get_mctrl(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + if (pinfo->gpios[GPIO_CTS] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_CTS])) + mctrl &= ~TIOCM_CTS; + } + + if (pinfo->gpios[GPIO_DSR] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_DSR])) + mctrl &= ~TIOCM_DSR; + } + + if (pinfo->gpios[GPIO_DCD] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_DCD])) + mctrl &= ~TIOCM_CAR; + } + + if (pinfo->gpios[GPIO_RI] >= 0) { + if (!gpio_get_value(pinfo->gpios[GPIO_RI])) + mctrl |= TIOCM_RNG; + } + + return mctrl; +} + +/* + * Stop transmitter + */ +static void cpm_uart_stop_tx(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:stop tx\n", port->line); + + if (IS_SMC(pinfo)) + clrbits8(&smcp->smc_smcm, SMCM_TX); + else + clrbits16(&sccp->scc_sccm, UART_SCCM_TX); +} + +/* + * Start transmitter + */ +static void cpm_uart_start_tx(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:start tx\n", port->line); + + if (IS_SMC(pinfo)) { + if (in_8(&smcp->smc_smcm) & SMCM_TX) + return; + } else { + if (in_be16(&sccp->scc_sccm) & UART_SCCM_TX) + return; + } + + if (cpm_uart_tx_pump(port) != 0) { + if (IS_SMC(pinfo)) { + setbits8(&smcp->smc_smcm, SMCM_TX); + } else { + setbits16(&sccp->scc_sccm, UART_SCCM_TX); + } + } +} + +/* + * Stop receiver + */ +static void cpm_uart_stop_rx(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:stop rx\n", port->line); + + if (IS_SMC(pinfo)) + clrbits8(&smcp->smc_smcm, SMCM_RX); + else + clrbits16(&sccp->scc_sccm, UART_SCCM_RX); +} + +/* + * Enable Modem status interrupts + */ +static void cpm_uart_enable_ms(struct uart_port *port) +{ + pr_debug("CPM uart[%d]:enable ms\n", port->line); +} + +/* + * Generate a break. + */ +static void cpm_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + pr_debug("CPM uart[%d]:break ctrl, break_state: %d\n", port->line, + break_state); + + if (break_state) + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); + else + cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); +} + +/* + * Transmit characters, refill buffer descriptor, if possible + */ +static void cpm_uart_int_tx(struct uart_port *port) +{ + pr_debug("CPM uart[%d]:TX INT\n", port->line); + + cpm_uart_tx_pump(port); +} + +#ifdef CONFIG_CONSOLE_POLL +static int serial_polled; +#endif + +/* + * Receive characters + */ +static void cpm_uart_int_rx(struct uart_port *port) +{ + int i; + unsigned char ch; + u8 *cp; + struct tty_struct *tty = port->state->port.tty; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + cbd_t __iomem *bdp; + u16 status; + unsigned int flg; + + pr_debug("CPM uart[%d]:RX INT\n", port->line); + + /* Just loop through the closed BDs and copy the characters into + * the buffer. + */ + bdp = pinfo->rx_cur; + for (;;) { +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return; + } +#endif + /* get status */ + status = in_be16(&bdp->cbd_sc); + /* If this one is empty, return happy */ + if (status & BD_SC_EMPTY) + break; + + /* get number of characters, and check spce in flip-buffer */ + i = in_be16(&bdp->cbd_datlen); + + /* If we have not enough room in tty flip buffer, then we try + * later, which will be the next rx-interrupt or a timeout + */ + if(tty_buffer_request_room(tty, i) < i) { + printk(KERN_WARNING "No room in flip buffer\n"); + return; + } + + /* get pointer */ + cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); + + /* loop through the buffer */ + while (i-- > 0) { + ch = *cp++; + port->icount.rx++; + flg = TTY_NORMAL; + + if (status & + (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV)) + goto handle_error; + if (uart_handle_sysrq_char(port, ch)) + continue; +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return; + } +#endif + error_return: + tty_insert_flip_char(tty, ch, flg); + + } /* End while (i--) */ + + /* This BD is ready to be used again. Clear status. get next */ + clrbits16(&bdp->cbd_sc, BD_SC_BR | BD_SC_FR | BD_SC_PR | + BD_SC_OV | BD_SC_ID); + setbits16(&bdp->cbd_sc, BD_SC_EMPTY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = pinfo->rx_bd_base; + else + bdp++; + + } /* End for (;;) */ + + /* Write back buffer pointer */ + pinfo->rx_cur = bdp; + + /* activate BH processing */ + tty_flip_buffer_push(tty); + + return; + + /* Error processing */ + + handle_error: + /* Statistics */ + if (status & BD_SC_BR) + port->icount.brk++; + if (status & BD_SC_PR) + port->icount.parity++; + if (status & BD_SC_FR) + port->icount.frame++; + if (status & BD_SC_OV) + port->icount.overrun++; + + /* Mask out ignored conditions */ + status &= port->read_status_mask; + + /* Handle the remaining ones */ + if (status & BD_SC_BR) + flg = TTY_BREAK; + else if (status & BD_SC_PR) + flg = TTY_PARITY; + else if (status & BD_SC_FR) + flg = TTY_FRAME; + + /* overrun does not affect the current character ! */ + if (status & BD_SC_OV) { + ch = 0; + flg = TTY_OVERRUN; + /* We skip this buffer */ + /* CHECK: Is really nothing senseful there */ + /* ASSUMPTION: it contains nothing valid */ + i = 0; + } +#ifdef SUPPORT_SYSRQ + port->sysrq = 0; +#endif + goto error_return; +} + +/* + * Asynchron mode interrupt handler + */ +static irqreturn_t cpm_uart_int(int irq, void *data) +{ + u8 events; + struct uart_port *port = data; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:IRQ\n", port->line); + + if (IS_SMC(pinfo)) { + events = in_8(&smcp->smc_smce); + out_8(&smcp->smc_smce, events); + if (events & SMCM_BRKE) + uart_handle_break(port); + if (events & SMCM_RX) + cpm_uart_int_rx(port); + if (events & SMCM_TX) + cpm_uart_int_tx(port); + } else { + events = in_be16(&sccp->scc_scce); + out_be16(&sccp->scc_scce, events); + if (events & UART_SCCM_BRKE) + uart_handle_break(port); + if (events & UART_SCCM_RX) + cpm_uart_int_rx(port); + if (events & UART_SCCM_TX) + cpm_uart_int_tx(port); + } + return (events) ? IRQ_HANDLED : IRQ_NONE; +} + +static int cpm_uart_startup(struct uart_port *port) +{ + int retval; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + pr_debug("CPM uart[%d]:startup\n", port->line); + + /* If the port is not the console, make sure rx is disabled. */ + if (!(pinfo->flags & FLAG_CONSOLE)) { + /* Disable UART rx */ + if (IS_SMC(pinfo)) { + clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN); + clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX); + } else { + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR); + clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); + } + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); + } + /* Install interrupt handler. */ + retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port); + if (retval) + return retval; + + /* Startup rx-int */ + if (IS_SMC(pinfo)) { + setbits8(&pinfo->smcp->smc_smcm, SMCM_RX); + setbits16(&pinfo->smcp->smc_smcmr, (SMCMR_REN | SMCMR_TEN)); + } else { + setbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX); + setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT)); + } + + return 0; +} + +inline void cpm_uart_wait_until_send(struct uart_cpm_port *pinfo) +{ + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(pinfo->wait_closing); +} + +/* + * Shutdown the uart + */ +static void cpm_uart_shutdown(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + pr_debug("CPM uart[%d]:shutdown\n", port->line); + + /* free interrupt handler */ + free_irq(port->irq, port); + + /* If the port is not the console, disable Rx and Tx. */ + if (!(pinfo->flags & FLAG_CONSOLE)) { + /* Wait for all the BDs marked sent */ + while(!cpm_uart_tx_empty(port)) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(2); + } + + if (pinfo->wait_closing) + cpm_uart_wait_until_send(pinfo); + + /* Stop uarts */ + if (IS_SMC(pinfo)) { + smc_t __iomem *smcp = pinfo->smcp; + clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); + clrbits8(&smcp->smc_smcm, SMCM_RX | SMCM_TX); + } else { + scc_t __iomem *sccp = pinfo->sccp; + clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + clrbits16(&sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + } + + /* Shut them really down and reinit buffer descriptors */ + if (IS_SMC(pinfo)) { + out_be16(&pinfo->smcup->smc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); + } else { + out_be16(&pinfo->sccup->scc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); + } + + cpm_uart_initbd(pinfo); + } +} + +static void cpm_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + int baud; + unsigned long flags; + u16 cval, scval, prev_mode; + int bits, sbits; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + smc_t __iomem *smcp = pinfo->smcp; + scc_t __iomem *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:set_termios\n", port->line); + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + if (baud <= HW_BUF_SPD_THRESHOLD || + (pinfo->port.state && pinfo->port.state->port.tty->low_latency)) + pinfo->rx_fifosize = 1; + else + pinfo->rx_fifosize = RX_BUF_SIZE; + + /* Character length programmed into the mode register is the + * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, + * 1 or 2 stop bits, minus 1. + * The value 'bits' counts this for us. + */ + cval = 0; + scval = 0; + + /* byte size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + bits = 5; + break; + case CS6: + bits = 6; + break; + case CS7: + bits = 7; + break; + case CS8: + bits = 8; + break; + /* Never happens, but GCC is too dumb to figure it out */ + default: + bits = 8; + break; + } + sbits = bits - 5; + + if (termios->c_cflag & CSTOPB) { + cval |= SMCMR_SL; /* Two stops */ + scval |= SCU_PSMR_SL; + bits++; + } + + if (termios->c_cflag & PARENB) { + cval |= SMCMR_PEN; + scval |= SCU_PSMR_PEN; + bits++; + if (!(termios->c_cflag & PARODD)) { + cval |= SMCMR_PM_EVEN; + scval |= (SCU_PSMR_REVP | SCU_PSMR_TEVP); + } + } + + /* + * Update the timeout + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * Set up parity check flag + */ +#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + + port->read_status_mask = (BD_SC_EMPTY | BD_SC_OV); + if (termios->c_iflag & INPCK) + port->read_status_mask |= BD_SC_FR | BD_SC_PR; + if ((termios->c_iflag & BRKINT) || (termios->c_iflag & PARMRK)) + port->read_status_mask |= BD_SC_BR; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_PR | BD_SC_FR; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BD_SC_BR; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_OV; + } + /* + * !!! ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + port->read_status_mask &= ~BD_SC_EMPTY; + + spin_lock_irqsave(&port->lock, flags); + + /* Start bit has not been added (so don't, because we would just + * subtract it later), and we need to add one for the number of + * stops bits (there is always at least one). + */ + bits++; + if (IS_SMC(pinfo)) { + /* + * MRBLR can be changed while an SMC/SCC is operating only + * if it is done in a single bus cycle with one 16-bit move + * (not two 8-bit bus cycles back-to-back). This occurs when + * the cp shifts control to the next RxBD, so the change does + * not take effect immediately. To guarantee the exact RxBD + * on which the change occurs, change MRBLR only while the + * SMC/SCC receiver is disabled. + */ + out_be16(&pinfo->smcup->smc_mrblr, pinfo->rx_fifosize); + + /* Set the mode register. We want to keep a copy of the + * enables, because we want to put them back if they were + * present. + */ + prev_mode = in_be16(&smcp->smc_smcmr) & (SMCMR_REN | SMCMR_TEN); + /* Output in *one* operation, so we don't interrupt RX/TX if they + * were already enabled. */ + out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | + SMCMR_SM_UART | prev_mode); + } else { + out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); + out_be16(&sccp->scc_psmr, (sbits << 12) | scval); + } + + if (pinfo->clk) + clk_set_rate(pinfo->clk, baud); + else + cpm_set_brg(pinfo->brg - 1, baud); + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *cpm_uart_type(struct uart_port *port) +{ + pr_debug("CPM uart[%d]:uart_type\n", port->line); + + return port->type == PORT_CPM ? "CPM UART" : NULL; +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int cpm_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + int ret = 0; + + pr_debug("CPM uart[%d]:verify_port\n", port->line); + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= nr_irqs) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +/* + * Transmit characters, refill buffer descriptor, if possible + */ +static int cpm_uart_tx_pump(struct uart_port *port) +{ + cbd_t __iomem *bdp; + u8 *p; + int count; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + struct circ_buf *xmit = &port->state->xmit; + + /* Handle xon/xoff */ + if (port->x_char) { + /* Pick next descriptor and fill from buffer */ + bdp = pinfo->tx_cur; + + p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); + + *p++ = port->x_char; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + /* Get next BD. */ + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = pinfo->tx_bd_base; + else + bdp++; + pinfo->tx_cur = bdp; + + port->icount.tx++; + port->x_char = 0; + return 1; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + cpm_uart_stop_tx(port); + return 0; + } + + /* Pick next descriptor and fill from buffer */ + bdp = pinfo->tx_cur; + + while (!(in_be16(&bdp->cbd_sc) & BD_SC_READY) && + xmit->tail != xmit->head) { + count = 0; + p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo); + while (count < pinfo->tx_fifosize) { + *p++ = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + count++; + if (xmit->head == xmit->tail) + break; + } + out_be16(&bdp->cbd_datlen, count); + setbits16(&bdp->cbd_sc, BD_SC_READY); + /* Get next BD. */ + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = pinfo->tx_bd_base; + else + bdp++; + } + pinfo->tx_cur = bdp; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) { + cpm_uart_stop_tx(port); + return 0; + } + + return 1; +} + +/* + * init buffer descriptors + */ +static void cpm_uart_initbd(struct uart_cpm_port *pinfo) +{ + int i; + u8 *mem_addr; + cbd_t __iomem *bdp; + + pr_debug("CPM uart[%d]:initbd\n", pinfo->port.line); + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + mem_addr = pinfo->mem_addr; + bdp = pinfo->rx_cur = pinfo->rx_bd_base; + for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) { + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT); + mem_addr += pinfo->rx_fifosize; + } + + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT); + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize); + bdp = pinfo->tx_cur = pinfo->tx_bd_base; + for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) { + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_INTRPT); + mem_addr += pinfo->tx_fifosize; + } + + out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo)); + out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_INTRPT); +} + +static void cpm_uart_init_scc(struct uart_cpm_port *pinfo) +{ + scc_t __iomem *scp; + scc_uart_t __iomem *sup; + + pr_debug("CPM uart[%d]:init_scc\n", pinfo->port.line); + + scp = pinfo->sccp; + sup = pinfo->sccup; + + /* Store address */ + out_be16(&pinfo->sccup->scc_genscc.scc_rbase, + (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE); + out_be16(&pinfo->sccup->scc_genscc.scc_tbase, + (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); + + /* Set up the uart parameters in the + * parameter ram. + */ + + cpm_set_scc_fcr(sup); + + out_be16(&sup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); + out_be16(&sup->scc_maxidl, pinfo->rx_fifosize); + out_be16(&sup->scc_brkcr, 1); + out_be16(&sup->scc_parec, 0); + out_be16(&sup->scc_frmec, 0); + out_be16(&sup->scc_nosec, 0); + out_be16(&sup->scc_brkec, 0); + out_be16(&sup->scc_uaddr1, 0); + out_be16(&sup->scc_uaddr2, 0); + out_be16(&sup->scc_toseq, 0); + out_be16(&sup->scc_char1, 0x8000); + out_be16(&sup->scc_char2, 0x8000); + out_be16(&sup->scc_char3, 0x8000); + out_be16(&sup->scc_char4, 0x8000); + out_be16(&sup->scc_char5, 0x8000); + out_be16(&sup->scc_char6, 0x8000); + out_be16(&sup->scc_char7, 0x8000); + out_be16(&sup->scc_char8, 0x8000); + out_be16(&sup->scc_rccm, 0xc0ff); + + /* Send the CPM an initialize command. + */ + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + out_be32(&scp->scc_gsmrh, 0); + out_be32(&scp->scc_gsmrl, + SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); + + /* Enable rx interrupts and clear all pending events. */ + out_be16(&scp->scc_sccm, 0); + out_be16(&scp->scc_scce, 0xffff); + out_be16(&scp->scc_dsr, 0x7e7e); + out_be16(&scp->scc_psmr, 0x3000); + + setbits32(&scp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); +} + +static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) +{ + smc_t __iomem *sp; + smc_uart_t __iomem *up; + + pr_debug("CPM uart[%d]:init_smc\n", pinfo->port.line); + + sp = pinfo->smcp; + up = pinfo->smcup; + + /* Store address */ + out_be16(&pinfo->smcup->smc_rbase, + (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE); + out_be16(&pinfo->smcup->smc_tbase, + (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE); + +/* + * In case SMC1 is being relocated... + */ +#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH) + out_be16(&up->smc_rbptr, in_be16(&pinfo->smcup->smc_rbase)); + out_be16(&up->smc_tbptr, in_be16(&pinfo->smcup->smc_tbase)); + out_be32(&up->smc_rstate, 0); + out_be32(&up->smc_tstate, 0); + out_be16(&up->smc_brkcr, 1); /* number of break chars */ + out_be16(&up->smc_brkec, 0); +#endif + + /* Set up the uart parameters in the + * parameter ram. + */ + cpm_set_smc_fcr(up); + + /* Using idle character time requires some additional tuning. */ + out_be16(&up->smc_mrblr, pinfo->rx_fifosize); + out_be16(&up->smc_maxidl, pinfo->rx_fifosize); + out_be16(&up->smc_brklen, 0); + out_be16(&up->smc_brkec, 0); + out_be16(&up->smc_brkcr, 1); + + cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + out_be16(&sp->smc_smcmr, smcr_mk_clen(9) | SMCMR_SM_UART); + + /* Enable only rx interrupts clear all pending events. */ + out_8(&sp->smc_smcm, 0); + out_8(&sp->smc_smce, 0xff); + + setbits16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN); +} + +/* + * Initialize port. This is called from early_console stuff + * so we have to be careful here ! + */ +static int cpm_uart_request_port(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + int ret; + + pr_debug("CPM uart[%d]:request port\n", port->line); + + if (pinfo->flags & FLAG_CONSOLE) + return 0; + + if (IS_SMC(pinfo)) { + clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); + clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); + } else { + clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + } + + ret = cpm_uart_allocbuf(pinfo, 0); + + if (ret) + return ret; + + cpm_uart_initbd(pinfo); + if (IS_SMC(pinfo)) + cpm_uart_init_smc(pinfo); + else + cpm_uart_init_scc(pinfo); + + return 0; +} + +static void cpm_uart_release_port(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (!(pinfo->flags & FLAG_CONSOLE)) + cpm_uart_freebuf(pinfo); +} + +/* + * Configure/autoconfigure the port. + */ +static void cpm_uart_config_port(struct uart_port *port, int flags) +{ + pr_debug("CPM uart[%d]:config_port\n", port->line); + + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_CPM; + cpm_uart_request_port(port); + } +} + +#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE) +/* + * Write a string to the serial port + * Note that this is called with interrupts already disabled + */ +static void cpm_uart_early_write(struct uart_cpm_port *pinfo, + const char *string, u_int count) +{ + unsigned int i; + cbd_t __iomem *bdp, *bdbase; + unsigned char *cpm_outp_addr; + + /* Get the address of the host memory buffer. + */ + bdp = pinfo->tx_cur; + bdbase = pinfo->tx_bd_base; + + /* + * Now, do each character. This is not as bad as it looks + * since this is a holding FIFO and not a transmitting FIFO. + * We could add the complexity of filling the entire transmit + * buffer, but we would just wait longer between accesses...... + */ + for (i = 0; i < count; i++, string++) { + /* Wait for transmitter fifo to empty. + * Ready indicates output is ready, and xmt is doing + * that, not that it is ready for us to send. + */ + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + /* Send the character out. + * If the buffer address is in the CPM DPRAM, don't + * convert it. + */ + cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), + pinfo); + *cpm_outp_addr = *string; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + + /* if a LF, also do CR... */ + if (*string == 10) { + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), + pinfo); + *cpm_outp_addr = 13; + + out_be16(&bdp->cbd_datlen, 1); + setbits16(&bdp->cbd_sc, BD_SC_READY); + + if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + } + } + + /* + * Finally, Wait for transmitter & holding register to empty + * and restore the IER + */ + while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0) + ; + + pinfo->tx_cur = bdp; +} +#endif + +#ifdef CONFIG_CONSOLE_POLL +/* Serial polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +#define GDB_BUF_SIZE 512 /* power of 2, please */ + +static char poll_buf[GDB_BUF_SIZE]; +static char *pollp; +static int poll_chars; + +static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo) +{ + u_char c, *cp; + volatile cbd_t *bdp; + int i; + + /* Get the address of the host memory buffer. + */ + bdp = pinfo->rx_cur; + while (bdp->cbd_sc & BD_SC_EMPTY) + ; + + /* If the buffer address is in the CPM DPRAM, don't + * convert it. + */ + cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo); + + if (obuf) { + i = c = bdp->cbd_datlen; + while (i-- > 0) + *obuf++ = *cp++; + } else + c = *cp; + bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID); + bdp->cbd_sc |= BD_SC_EMPTY; + + if (bdp->cbd_sc & BD_SC_WRAP) + bdp = pinfo->rx_bd_base; + else + bdp++; + pinfo->rx_cur = (cbd_t *)bdp; + + return (int)c; +} + +static int cpm_get_poll_char(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (!serial_polled) { + serial_polled = 1; + poll_chars = 0; + } + if (poll_chars <= 0) { + poll_chars = poll_wait_key(poll_buf, pinfo); + pollp = poll_buf; + } + poll_chars--; + return *pollp++; +} + +static void cpm_put_poll_char(struct uart_port *port, + unsigned char c) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + static char ch[2]; + + ch[0] = (char)c; + cpm_uart_early_write(pinfo, ch, 1); +} +#endif /* CONFIG_CONSOLE_POLL */ + +static struct uart_ops cpm_uart_pops = { + .tx_empty = cpm_uart_tx_empty, + .set_mctrl = cpm_uart_set_mctrl, + .get_mctrl = cpm_uart_get_mctrl, + .stop_tx = cpm_uart_stop_tx, + .start_tx = cpm_uart_start_tx, + .stop_rx = cpm_uart_stop_rx, + .enable_ms = cpm_uart_enable_ms, + .break_ctl = cpm_uart_break_ctl, + .startup = cpm_uart_startup, + .shutdown = cpm_uart_shutdown, + .set_termios = cpm_uart_set_termios, + .type = cpm_uart_type, + .release_port = cpm_uart_release_port, + .request_port = cpm_uart_request_port, + .config_port = cpm_uart_config_port, + .verify_port = cpm_uart_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = cpm_get_poll_char, + .poll_put_char = cpm_put_poll_char, +#endif +}; + +struct uart_cpm_port cpm_uart_ports[UART_NR]; + +static int cpm_uart_init_port(struct device_node *np, + struct uart_cpm_port *pinfo) +{ + const u32 *data; + void __iomem *mem, *pram; + int len; + int ret; + int i; + + data = of_get_property(np, "clock", NULL); + if (data) { + struct clk *clk = clk_get(NULL, (const char*)data); + if (!IS_ERR(clk)) + pinfo->clk = clk; + } + if (!pinfo->clk) { + data = of_get_property(np, "fsl,cpm-brg", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %s has no/invalid " + "fsl,cpm-brg property.\n", np->name); + return -EINVAL; + } + pinfo->brg = *data; + } + + data = of_get_property(np, "fsl,cpm-command", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %s has no/invalid " + "fsl,cpm-command property.\n", np->name); + return -EINVAL; + } + pinfo->command = *data; + + mem = of_iomap(np, 0); + if (!mem) + return -ENOMEM; + + if (of_device_is_compatible(np, "fsl,cpm1-scc-uart") || + of_device_is_compatible(np, "fsl,cpm2-scc-uart")) { + pinfo->sccp = mem; + pinfo->sccup = pram = cpm_uart_map_pram(pinfo, np); + } else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") || + of_device_is_compatible(np, "fsl,cpm2-smc-uart")) { + pinfo->flags |= FLAG_SMC; + pinfo->smcp = mem; + pinfo->smcup = pram = cpm_uart_map_pram(pinfo, np); + } else { + ret = -ENODEV; + goto out_mem; + } + + if (!pram) { + ret = -ENOMEM; + goto out_mem; + } + + pinfo->tx_nrfifos = TX_NUM_FIFO; + pinfo->tx_fifosize = TX_BUF_SIZE; + pinfo->rx_nrfifos = RX_NUM_FIFO; + pinfo->rx_fifosize = RX_BUF_SIZE; + + pinfo->port.uartclk = ppc_proc_freq; + pinfo->port.mapbase = (unsigned long)mem; + pinfo->port.type = PORT_CPM; + pinfo->port.ops = &cpm_uart_pops, + pinfo->port.iotype = UPIO_MEM; + pinfo->port.fifosize = pinfo->tx_nrfifos * pinfo->tx_fifosize; + spin_lock_init(&pinfo->port.lock); + + pinfo->port.irq = of_irq_to_resource(np, 0, NULL); + if (pinfo->port.irq == NO_IRQ) { + ret = -EINVAL; + goto out_pram; + } + + for (i = 0; i < NUM_GPIOS; i++) + pinfo->gpios[i] = of_get_gpio(np, i); + +#ifdef CONFIG_PPC_EARLY_DEBUG_CPM + udbg_putc = NULL; +#endif + + return cpm_uart_request_port(&pinfo->port); + +out_pram: + cpm_uart_unmap_pram(pinfo, pram); +out_mem: + iounmap(mem); + return ret; +} + +#ifdef CONFIG_SERIAL_CPM_CONSOLE +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * Note that this is called with interrupts already disabled + */ +static void cpm_uart_console_write(struct console *co, const char *s, + u_int count) +{ + struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index]; + unsigned long flags; + int nolock = oops_in_progress; + + if (unlikely(nolock)) { + local_irq_save(flags); + } else { + spin_lock_irqsave(&pinfo->port.lock, flags); + } + + cpm_uart_early_write(pinfo, s, count); + + if (unlikely(nolock)) { + local_irq_restore(flags); + } else { + spin_unlock_irqrestore(&pinfo->port.lock, flags); + } +} + + +static int __init cpm_uart_console_setup(struct console *co, char *options) +{ + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + struct uart_cpm_port *pinfo; + struct uart_port *port; + + struct device_node *np = NULL; + int i = 0; + + if (co->index >= UART_NR) { + printk(KERN_ERR "cpm_uart: console index %d too high\n", + co->index); + return -ENODEV; + } + + do { + np = of_find_node_by_type(np, "serial"); + if (!np) + return -ENODEV; + + if (!of_device_is_compatible(np, "fsl,cpm1-smc-uart") && + !of_device_is_compatible(np, "fsl,cpm1-scc-uart") && + !of_device_is_compatible(np, "fsl,cpm2-smc-uart") && + !of_device_is_compatible(np, "fsl,cpm2-scc-uart")) + i--; + } while (i++ != co->index); + + pinfo = &cpm_uart_ports[co->index]; + + pinfo->flags |= FLAG_CONSOLE; + port = &pinfo->port; + + ret = cpm_uart_init_port(np, pinfo); + of_node_put(np); + if (ret) + return ret; + + if (options) { + uart_parse_options(options, &baud, &parity, &bits, &flow); + } else { + if ((baud = uart_baudrate()) == -1) + baud = 9600; + } + + if (IS_SMC(pinfo)) { + out_be16(&pinfo->smcup->smc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX); + clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX); + clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); + } else { + out_be16(&pinfo->sccup->scc_brkcr, 0); + cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX); + clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX); + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); + } + + ret = cpm_uart_allocbuf(pinfo, 1); + + if (ret) + return ret; + + cpm_uart_initbd(pinfo); + + if (IS_SMC(pinfo)) + cpm_uart_init_smc(pinfo); + else + cpm_uart_init_scc(pinfo); + + uart_set_options(port, co, baud, parity, bits, flow); + cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX); + + return 0; +} + +static struct uart_driver cpm_reg; +static struct console cpm_scc_uart_console = { + .name = "ttyCPM", + .write = cpm_uart_console_write, + .device = uart_console_device, + .setup = cpm_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &cpm_reg, +}; + +static int __init cpm_uart_console_init(void) +{ + register_console(&cpm_scc_uart_console); + return 0; +} + +console_initcall(cpm_uart_console_init); + +#define CPM_UART_CONSOLE &cpm_scc_uart_console +#else +#define CPM_UART_CONSOLE NULL +#endif + +static struct uart_driver cpm_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyCPM", + .dev_name = "ttyCPM", + .major = SERIAL_CPM_MAJOR, + .minor = SERIAL_CPM_MINOR, + .cons = CPM_UART_CONSOLE, + .nr = UART_NR, +}; + +static int probe_index; + +static int __devinit cpm_uart_probe(struct platform_device *ofdev, + const struct of_device_id *match) +{ + int index = probe_index++; + struct uart_cpm_port *pinfo = &cpm_uart_ports[index]; + int ret; + + pinfo->port.line = index; + + if (index >= UART_NR) + return -ENODEV; + + dev_set_drvdata(&ofdev->dev, pinfo); + + /* initialize the device pointer for the port */ + pinfo->port.dev = &ofdev->dev; + + ret = cpm_uart_init_port(ofdev->dev.of_node, pinfo); + if (ret) + return ret; + + return uart_add_one_port(&cpm_reg, &pinfo->port); +} + +static int __devexit cpm_uart_remove(struct platform_device *ofdev) +{ + struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev); + return uart_remove_one_port(&cpm_reg, &pinfo->port); +} + +static struct of_device_id cpm_uart_match[] = { + { + .compatible = "fsl,cpm1-smc-uart", + }, + { + .compatible = "fsl,cpm1-scc-uart", + }, + { + .compatible = "fsl,cpm2-smc-uart", + }, + { + .compatible = "fsl,cpm2-scc-uart", + }, + {} +}; + +static struct of_platform_driver cpm_uart_driver = { + .driver = { + .name = "cpm_uart", + .owner = THIS_MODULE, + .of_match_table = cpm_uart_match, + }, + .probe = cpm_uart_probe, + .remove = cpm_uart_remove, + }; + +static int __init cpm_uart_init(void) +{ + int ret = uart_register_driver(&cpm_reg); + if (ret) + return ret; + + ret = of_register_platform_driver(&cpm_uart_driver); + if (ret) + uart_unregister_driver(&cpm_reg); + + return ret; +} + +static void __exit cpm_uart_exit(void) +{ + of_unregister_platform_driver(&cpm_uart_driver); + uart_unregister_driver(&cpm_reg); +} + +module_init(cpm_uart_init); +module_exit(cpm_uart_exit); + +MODULE_AUTHOR("Kumar Gala/Antoniou Pantelis"); +MODULE_DESCRIPTION("CPM SCC/SMC port driver $Revision: 0.01 $"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV(SERIAL_CPM_MAJOR, SERIAL_CPM_MINOR); diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c new file mode 100644 index 000000000000..3fc1d66e32c6 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c @@ -0,0 +1,138 @@ +/* + * linux/drivers/serial/cpm_uart.c + * + * Driver for CPM (SCC/SMC) serial ports; CPM1 definitions + * + * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) + * Pantelis Antoniou (panto@intracom.gr) (CPM1) + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * (C) 2004 Intracom, S.A. + * (C) 2006 MontaVista Software, Inc. + * Vitaly Bordug + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include + +#include "cpm_uart.h" + +/**************************************************************/ + +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) +{ + cpm_command(port->command, cmd); +} + +void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, + struct device_node *np) +{ + return of_iomap(np, 1); +} + +void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) +{ + iounmap(pram); +} + +/* + * Allocate DP-Ram and memory buffers. We need to allocate a transmit and + * receive buffer descriptors from dual port ram, and a character + * buffer area from host mem. If we are allocating for the console we need + * to do it from bootmem + */ +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) +{ + int dpmemsz, memsz; + u8 *dp_mem; + unsigned long dp_offset; + u8 *mem_addr; + dma_addr_t dma_addr = 0; + + pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); + + dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); + dp_offset = cpm_dpalloc(dpmemsz, 8); + if (IS_ERR_VALUE(dp_offset)) { + printk(KERN_ERR + "cpm_uart_cpm1.c: could not allocate buffer descriptors\n"); + return -ENOMEM; + } + dp_mem = cpm_dpram_addr(dp_offset); + + memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); + if (is_con) { + /* was hostalloc but changed cause it blows away the */ + /* large tlb mapping when pinning the kernel area */ + mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8)); + dma_addr = (u32)cpm_dpram_phys(mem_addr); + } else + mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, + GFP_KERNEL); + + if (mem_addr == NULL) { + cpm_dpfree(dp_offset); + printk(KERN_ERR + "cpm_uart_cpm1.c: could not allocate coherent memory\n"); + return -ENOMEM; + } + + pinfo->dp_addr = dp_offset; + pinfo->mem_addr = mem_addr; /* virtual address*/ + pinfo->dma_addr = dma_addr; /* physical address*/ + pinfo->mem_size = memsz; + + pinfo->rx_buf = mem_addr; + pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos + * pinfo->rx_fifosize); + + pinfo->rx_bd_base = (cbd_t __iomem __force *)dp_mem; + pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; + + return 0; +} + +void cpm_uart_freebuf(struct uart_cpm_port *pinfo) +{ + dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos * + pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * + pinfo->tx_fifosize), pinfo->mem_addr, + pinfo->dma_addr); + + cpm_dpfree(pinfo->dp_addr); +} diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h new file mode 100644 index 000000000000..10eecd6af6d4 --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h @@ -0,0 +1,34 @@ +/* + * linux/drivers/serial/cpm_uart/cpm_uart_cpm1.h + * + * Driver for CPM (SCC/SMC) serial ports + * + * definitions for cpm1 + * + */ + +#ifndef CPM_UART_CPM1_H +#define CPM_UART_CPM1_H + +#include + +static inline void cpm_set_brg(int brg, int baud) +{ + cpm_setbrg(brg, baud); +} + +static inline void cpm_set_scc_fcr(scc_uart_t __iomem * sup) +{ + out_8(&sup->scc_genscc.scc_rfcr, SMC_EB); + out_8(&sup->scc_genscc.scc_tfcr, SMC_EB); +} + +static inline void cpm_set_smc_fcr(smc_uart_t __iomem * up) +{ + out_8(&up->smc_rfcr, SMC_EB); + out_8(&up->smc_tfcr, SMC_EB); +} + +#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0)) + +#endif diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c new file mode 100644 index 000000000000..814ac006393f --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c @@ -0,0 +1,174 @@ +/* + * linux/drivers/serial/cpm_uart_cpm2.c + * + * Driver for CPM (SCC/SMC) serial ports; CPM2 definitions + * + * Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2) + * Pantelis Antoniou (panto@intracom.gr) (CPM1) + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * (C) 2004 Intracom, S.A. + * (C) 2006 MontaVista Software, Inc. + * Vitaly Bordug + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include "cpm_uart.h" + +/**************************************************************/ + +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) +{ + cpm_command(port->command, cmd); +} + +void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, + struct device_node *np) +{ + void __iomem *pram; + unsigned long offset; + struct resource res; + resource_size_t len; + + /* Don't remap parameter RAM if it has already been initialized + * during console setup. + */ + if (IS_SMC(port) && port->smcup) + return port->smcup; + else if (!IS_SMC(port) && port->sccup) + return port->sccup; + + if (of_address_to_resource(np, 1, &res)) + return NULL; + + len = resource_size(&res); + pram = ioremap(res.start, len); + if (!pram) + return NULL; + + if (!IS_SMC(port)) + return pram; + + if (len != 2) { + printk(KERN_WARNING "cpm_uart[%d]: device tree references " + "SMC pram, using boot loader/wrapper pram mapping. " + "Please fix your device tree to reference the pram " + "base register instead.\n", + port->port.line); + return pram; + } + + offset = cpm_dpalloc(PROFF_SMC_SIZE, 64); + out_be16(pram, offset); + iounmap(pram); + return cpm_muram_addr(offset); +} + +void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) +{ + if (!IS_SMC(port)) + iounmap(pram); +} + +/* + * Allocate DP-Ram and memory buffers. We need to allocate a transmit and + * receive buffer descriptors from dual port ram, and a character + * buffer area from host mem. If we are allocating for the console we need + * to do it from bootmem + */ +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) +{ + int dpmemsz, memsz; + u8 __iomem *dp_mem; + unsigned long dp_offset; + u8 *mem_addr; + dma_addr_t dma_addr = 0; + + pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); + + dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); + dp_offset = cpm_dpalloc(dpmemsz, 8); + if (IS_ERR_VALUE(dp_offset)) { + printk(KERN_ERR + "cpm_uart_cpm.c: could not allocate buffer descriptors\n"); + return -ENOMEM; + } + + dp_mem = cpm_dpram_addr(dp_offset); + + memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); + if (is_con) { + mem_addr = kzalloc(memsz, GFP_NOWAIT); + dma_addr = virt_to_bus(mem_addr); + } + else + mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, + GFP_KERNEL); + + if (mem_addr == NULL) { + cpm_dpfree(dp_offset); + printk(KERN_ERR + "cpm_uart_cpm.c: could not allocate coherent memory\n"); + return -ENOMEM; + } + + pinfo->dp_addr = dp_offset; + pinfo->mem_addr = mem_addr; + pinfo->dma_addr = dma_addr; + pinfo->mem_size = memsz; + + pinfo->rx_buf = mem_addr; + pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos + * pinfo->rx_fifosize); + + pinfo->rx_bd_base = (cbd_t __iomem *)dp_mem; + pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; + + return 0; +} + +void cpm_uart_freebuf(struct uart_cpm_port *pinfo) +{ + dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos * + pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * + pinfo->tx_fifosize), (void __force *)pinfo->mem_addr, + pinfo->dma_addr); + + cpm_dpfree(pinfo->dp_addr); +} diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h new file mode 100644 index 000000000000..7194c63dcf5f --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h @@ -0,0 +1,34 @@ +/* + * linux/drivers/serial/cpm_uart/cpm_uart_cpm2.h + * + * Driver for CPM (SCC/SMC) serial ports + * + * definitions for cpm2 + * + */ + +#ifndef CPM_UART_CPM2_H +#define CPM_UART_CPM2_H + +#include + +static inline void cpm_set_brg(int brg, int baud) +{ + cpm_setbrg(brg, baud); +} + +static inline void cpm_set_scc_fcr(scc_uart_t __iomem *sup) +{ + out_8(&sup->scc_genscc.scc_rfcr, CPMFCR_GBL | CPMFCR_EB); + out_8(&sup->scc_genscc.scc_tfcr, CPMFCR_GBL | CPMFCR_EB); +} + +static inline void cpm_set_smc_fcr(smc_uart_t __iomem *up) +{ + out_8(&up->smc_rfcr, CPMFCR_GBL | CPMFCR_EB); + out_8(&up->smc_tfcr, CPMFCR_GBL | CPMFCR_EB); +} + +#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0)) + +#endif diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c new file mode 100644 index 000000000000..bcc31f2140ac --- /dev/null +++ b/drivers/tty/serial/crisv10.c @@ -0,0 +1,4573 @@ +/* + * Serial port driver for the ETRAX 100LX chip + * + * Copyright (C) 1998-2007 Axis Communications AB + * + * Many, many authors. Based once upon a time on serial.c for 16x50. + * + */ + +static char *serial_version = "$Revision: 1.25 $"; + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +/* non-arch dependent serial structures are in linux/serial.h */ +#include +/* while we keep our own stuff (struct e100_serial) in a local .h file */ +#include "crisv10.h" +#include +#include + +#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER +#ifndef CONFIG_ETRAX_FAST_TIMER +#error "Enable FAST_TIMER to use SERIAL_FAST_TIMER" +#endif +#endif + +#if defined(CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS) && \ + (CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS == 0) +#error "RX_TIMEOUT_TICKS == 0 not allowed, use 1" +#endif + +#if defined(CONFIG_ETRAX_RS485_ON_PA) && defined(CONFIG_ETRAX_RS485_ON_PORT_G) +#error "Disable either CONFIG_ETRAX_RS485_ON_PA or CONFIG_ETRAX_RS485_ON_PORT_G" +#endif + +/* + * All of the compatibilty code so we can compile serial.c against + * older kernels is hidden in serial_compat.h + */ +#if defined(LOCAL_HEADERS) +#include "serial_compat.h" +#endif + +struct tty_driver *serial_driver; + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +//#define SERIAL_DEBUG_INTR +//#define SERIAL_DEBUG_OPEN +//#define SERIAL_DEBUG_FLOW +//#define SERIAL_DEBUG_DATA +//#define SERIAL_DEBUG_THROTTLE +//#define SERIAL_DEBUG_IO /* Debug for Extra control and status pins */ +//#define SERIAL_DEBUG_LINE 0 /* What serport we want to debug */ + +/* Enable this to use serial interrupts to handle when you + expect the first received event on the serial port to + be an error, break or similar. Used to be able to flash IRMA + from eLinux */ +#define SERIAL_HANDLE_EARLY_ERRORS + +/* Currently 16 descriptors x 128 bytes = 2048 bytes */ +#define SERIAL_DESCR_BUF_SIZE 256 + +#define SERIAL_PRESCALE_BASE 3125000 /* 3.125MHz */ +#define DEF_BAUD_BASE SERIAL_PRESCALE_BASE + +/* We don't want to load the system with massive fast timer interrupt + * on high baudrates so limit it to 250 us (4kHz) */ +#define MIN_FLUSH_TIME_USEC 250 + +/* Add an x here to log a lot of timer stuff */ +#define TIMERD(x) +/* Debug details of interrupt handling */ +#define DINTR1(x) /* irq on/off, errors */ +#define DINTR2(x) /* tx and rx */ +/* Debug flip buffer stuff */ +#define DFLIP(x) +/* Debug flow control and overview of data flow */ +#define DFLOW(x) +#define DBAUD(x) +#define DLOG_INT_TRIG(x) + +//#define DEBUG_LOG_INCLUDED +#ifndef DEBUG_LOG_INCLUDED +#define DEBUG_LOG(line, string, value) +#else +struct debug_log_info +{ + unsigned long time; + unsigned long timer_data; +// int line; + const char *string; + int value; +}; +#define DEBUG_LOG_SIZE 4096 + +struct debug_log_info debug_log[DEBUG_LOG_SIZE]; +int debug_log_pos = 0; + +#define DEBUG_LOG(_line, _string, _value) do { \ + if ((_line) == SERIAL_DEBUG_LINE) {\ + debug_log_func(_line, _string, _value); \ + }\ +}while(0) + +void debug_log_func(int line, const char *string, int value) +{ + if (debug_log_pos < DEBUG_LOG_SIZE) { + debug_log[debug_log_pos].time = jiffies; + debug_log[debug_log_pos].timer_data = *R_TIMER_DATA; +// debug_log[debug_log_pos].line = line; + debug_log[debug_log_pos].string = string; + debug_log[debug_log_pos].value = value; + debug_log_pos++; + } + /*printk(string, value);*/ +} +#endif + +#ifndef CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS +/* Default number of timer ticks before flushing rx fifo + * When using "little data, low latency applications: use 0 + * When using "much data applications (PPP)" use ~5 + */ +#define CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS 5 +#endif + +unsigned long timer_data_to_ns(unsigned long timer_data); + +static void change_speed(struct e100_serial *info); +static void rs_throttle(struct tty_struct * tty); +static void rs_wait_until_sent(struct tty_struct *tty, int timeout); +static int rs_write(struct tty_struct *tty, + const unsigned char *buf, int count); +#ifdef CONFIG_ETRAX_RS485 +static int e100_write_rs485(struct tty_struct *tty, + const unsigned char *buf, int count); +#endif +static int get_lsr_info(struct e100_serial *info, unsigned int *value); + + +#define DEF_BAUD 115200 /* 115.2 kbit/s */ +#define STD_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) +#define DEF_RX 0x20 /* or SERIAL_CTRL_W >> 8 */ +/* Default value of tx_ctrl register: has txd(bit 7)=1 (idle) as default */ +#define DEF_TX 0x80 /* or SERIAL_CTRL_B */ + +/* offsets from R_SERIALx_CTRL */ + +#define REG_DATA 0 +#define REG_DATA_STATUS32 0 /* this is the 32 bit register R_SERIALx_READ */ +#define REG_TR_DATA 0 +#define REG_STATUS 1 +#define REG_TR_CTRL 1 +#define REG_REC_CTRL 2 +#define REG_BAUD 3 +#define REG_XOFF 4 /* this is a 32 bit register */ + +/* The bitfields are the same for all serial ports */ +#define SER_RXD_MASK IO_MASK(R_SERIAL0_STATUS, rxd) +#define SER_DATA_AVAIL_MASK IO_MASK(R_SERIAL0_STATUS, data_avail) +#define SER_FRAMING_ERR_MASK IO_MASK(R_SERIAL0_STATUS, framing_err) +#define SER_PAR_ERR_MASK IO_MASK(R_SERIAL0_STATUS, par_err) +#define SER_OVERRUN_MASK IO_MASK(R_SERIAL0_STATUS, overrun) + +#define SER_ERROR_MASK (SER_OVERRUN_MASK | SER_PAR_ERR_MASK | SER_FRAMING_ERR_MASK) + +/* Values for info->errorcode */ +#define ERRCODE_SET_BREAK (TTY_BREAK) +#define ERRCODE_INSERT 0x100 +#define ERRCODE_INSERT_BREAK (ERRCODE_INSERT | TTY_BREAK) + +#define FORCE_EOP(info) *R_SET_EOP = 1U << info->iseteop; + +/* + * General note regarding the use of IO_* macros in this file: + * + * We will use the bits defined for DMA channel 6 when using various + * IO_* macros (e.g. IO_STATE, IO_MASK, IO_EXTRACT) and _assume_ they are + * the same for all channels (which of course they are). + * + * We will also use the bits defined for serial port 0 when writing commands + * to the different ports, as these bits too are the same for all ports. + */ + + +/* Mask for the irqs possibly enabled in R_IRQ_MASK1_RD etc. */ +static const unsigned long e100_ser_int_mask = 0 +#ifdef CONFIG_ETRAX_SERIAL_PORT0 +| IO_MASK(R_IRQ_MASK1_RD, ser0_data) | IO_MASK(R_IRQ_MASK1_RD, ser0_ready) +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT1 +| IO_MASK(R_IRQ_MASK1_RD, ser1_data) | IO_MASK(R_IRQ_MASK1_RD, ser1_ready) +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT2 +| IO_MASK(R_IRQ_MASK1_RD, ser2_data) | IO_MASK(R_IRQ_MASK1_RD, ser2_ready) +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT3 +| IO_MASK(R_IRQ_MASK1_RD, ser3_data) | IO_MASK(R_IRQ_MASK1_RD, ser3_ready) +#endif +; +unsigned long r_alt_ser_baudrate_shadow = 0; + +/* this is the data for the four serial ports in the etrax100 */ +/* DMA2(ser2), DMA4(ser3), DMA6(ser0) or DMA8(ser1) */ +/* R_DMA_CHx_CLR_INTR, R_DMA_CHx_FIRST, R_DMA_CHx_CMD */ + +static struct e100_serial rs_table[] = { + { .baud = DEF_BAUD, + .ioport = (unsigned char *)R_SERIAL0_CTRL, + .irq = 1U << 12, /* uses DMA 6 and 7 */ + .oclrintradr = R_DMA_CH6_CLR_INTR, + .ofirstadr = R_DMA_CH6_FIRST, + .ocmdadr = R_DMA_CH6_CMD, + .ostatusadr = R_DMA_CH6_STATUS, + .iclrintradr = R_DMA_CH7_CLR_INTR, + .ifirstadr = R_DMA_CH7_FIRST, + .icmdadr = R_DMA_CH7_CMD, + .idescradr = R_DMA_CH7_DESCR, + .flags = STD_FLAGS, + .rx_ctrl = DEF_RX, + .tx_ctrl = DEF_TX, + .iseteop = 2, + .dma_owner = dma_ser0, + .io_if = if_serial_0, +#ifdef CONFIG_ETRAX_SERIAL_PORT0 + .enabled = 1, +#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT + .dma_out_enabled = 1, + .dma_out_nbr = SER0_TX_DMA_NBR, + .dma_out_irq_nbr = SER0_DMA_TX_IRQ_NBR, + .dma_out_irq_flags = IRQF_DISABLED, + .dma_out_irq_description = "serial 0 dma tr", +#else + .dma_out_enabled = 0, + .dma_out_nbr = UINT_MAX, + .dma_out_irq_nbr = 0, + .dma_out_irq_flags = 0, + .dma_out_irq_description = NULL, +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN + .dma_in_enabled = 1, + .dma_in_nbr = SER0_RX_DMA_NBR, + .dma_in_irq_nbr = SER0_DMA_RX_IRQ_NBR, + .dma_in_irq_flags = IRQF_DISABLED, + .dma_in_irq_description = "serial 0 dma rec", +#else + .dma_in_enabled = 0, + .dma_in_nbr = UINT_MAX, + .dma_in_irq_nbr = 0, + .dma_in_irq_flags = 0, + .dma_in_irq_description = NULL, +#endif +#else + .enabled = 0, + .io_if_description = NULL, + .dma_out_enabled = 0, + .dma_in_enabled = 0 +#endif + +}, /* ttyS0 */ +#ifndef CONFIG_SVINTO_SIM + { .baud = DEF_BAUD, + .ioport = (unsigned char *)R_SERIAL1_CTRL, + .irq = 1U << 16, /* uses DMA 8 and 9 */ + .oclrintradr = R_DMA_CH8_CLR_INTR, + .ofirstadr = R_DMA_CH8_FIRST, + .ocmdadr = R_DMA_CH8_CMD, + .ostatusadr = R_DMA_CH8_STATUS, + .iclrintradr = R_DMA_CH9_CLR_INTR, + .ifirstadr = R_DMA_CH9_FIRST, + .icmdadr = R_DMA_CH9_CMD, + .idescradr = R_DMA_CH9_DESCR, + .flags = STD_FLAGS, + .rx_ctrl = DEF_RX, + .tx_ctrl = DEF_TX, + .iseteop = 3, + .dma_owner = dma_ser1, + .io_if = if_serial_1, +#ifdef CONFIG_ETRAX_SERIAL_PORT1 + .enabled = 1, + .io_if_description = "ser1", +#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT + .dma_out_enabled = 1, + .dma_out_nbr = SER1_TX_DMA_NBR, + .dma_out_irq_nbr = SER1_DMA_TX_IRQ_NBR, + .dma_out_irq_flags = IRQF_DISABLED, + .dma_out_irq_description = "serial 1 dma tr", +#else + .dma_out_enabled = 0, + .dma_out_nbr = UINT_MAX, + .dma_out_irq_nbr = 0, + .dma_out_irq_flags = 0, + .dma_out_irq_description = NULL, +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN + .dma_in_enabled = 1, + .dma_in_nbr = SER1_RX_DMA_NBR, + .dma_in_irq_nbr = SER1_DMA_RX_IRQ_NBR, + .dma_in_irq_flags = IRQF_DISABLED, + .dma_in_irq_description = "serial 1 dma rec", +#else + .dma_in_enabled = 0, + .dma_in_enabled = 0, + .dma_in_nbr = UINT_MAX, + .dma_in_irq_nbr = 0, + .dma_in_irq_flags = 0, + .dma_in_irq_description = NULL, +#endif +#else + .enabled = 0, + .io_if_description = NULL, + .dma_in_irq_nbr = 0, + .dma_out_enabled = 0, + .dma_in_enabled = 0 +#endif +}, /* ttyS1 */ + + { .baud = DEF_BAUD, + .ioport = (unsigned char *)R_SERIAL2_CTRL, + .irq = 1U << 4, /* uses DMA 2 and 3 */ + .oclrintradr = R_DMA_CH2_CLR_INTR, + .ofirstadr = R_DMA_CH2_FIRST, + .ocmdadr = R_DMA_CH2_CMD, + .ostatusadr = R_DMA_CH2_STATUS, + .iclrintradr = R_DMA_CH3_CLR_INTR, + .ifirstadr = R_DMA_CH3_FIRST, + .icmdadr = R_DMA_CH3_CMD, + .idescradr = R_DMA_CH3_DESCR, + .flags = STD_FLAGS, + .rx_ctrl = DEF_RX, + .tx_ctrl = DEF_TX, + .iseteop = 0, + .dma_owner = dma_ser2, + .io_if = if_serial_2, +#ifdef CONFIG_ETRAX_SERIAL_PORT2 + .enabled = 1, + .io_if_description = "ser2", +#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT + .dma_out_enabled = 1, + .dma_out_nbr = SER2_TX_DMA_NBR, + .dma_out_irq_nbr = SER2_DMA_TX_IRQ_NBR, + .dma_out_irq_flags = IRQF_DISABLED, + .dma_out_irq_description = "serial 2 dma tr", +#else + .dma_out_enabled = 0, + .dma_out_nbr = UINT_MAX, + .dma_out_irq_nbr = 0, + .dma_out_irq_flags = 0, + .dma_out_irq_description = NULL, +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN + .dma_in_enabled = 1, + .dma_in_nbr = SER2_RX_DMA_NBR, + .dma_in_irq_nbr = SER2_DMA_RX_IRQ_NBR, + .dma_in_irq_flags = IRQF_DISABLED, + .dma_in_irq_description = "serial 2 dma rec", +#else + .dma_in_enabled = 0, + .dma_in_nbr = UINT_MAX, + .dma_in_irq_nbr = 0, + .dma_in_irq_flags = 0, + .dma_in_irq_description = NULL, +#endif +#else + .enabled = 0, + .io_if_description = NULL, + .dma_out_enabled = 0, + .dma_in_enabled = 0 +#endif + }, /* ttyS2 */ + + { .baud = DEF_BAUD, + .ioport = (unsigned char *)R_SERIAL3_CTRL, + .irq = 1U << 8, /* uses DMA 4 and 5 */ + .oclrintradr = R_DMA_CH4_CLR_INTR, + .ofirstadr = R_DMA_CH4_FIRST, + .ocmdadr = R_DMA_CH4_CMD, + .ostatusadr = R_DMA_CH4_STATUS, + .iclrintradr = R_DMA_CH5_CLR_INTR, + .ifirstadr = R_DMA_CH5_FIRST, + .icmdadr = R_DMA_CH5_CMD, + .idescradr = R_DMA_CH5_DESCR, + .flags = STD_FLAGS, + .rx_ctrl = DEF_RX, + .tx_ctrl = DEF_TX, + .iseteop = 1, + .dma_owner = dma_ser3, + .io_if = if_serial_3, +#ifdef CONFIG_ETRAX_SERIAL_PORT3 + .enabled = 1, + .io_if_description = "ser3", +#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT + .dma_out_enabled = 1, + .dma_out_nbr = SER3_TX_DMA_NBR, + .dma_out_irq_nbr = SER3_DMA_TX_IRQ_NBR, + .dma_out_irq_flags = IRQF_DISABLED, + .dma_out_irq_description = "serial 3 dma tr", +#else + .dma_out_enabled = 0, + .dma_out_nbr = UINT_MAX, + .dma_out_irq_nbr = 0, + .dma_out_irq_flags = 0, + .dma_out_irq_description = NULL, +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN + .dma_in_enabled = 1, + .dma_in_nbr = SER3_RX_DMA_NBR, + .dma_in_irq_nbr = SER3_DMA_RX_IRQ_NBR, + .dma_in_irq_flags = IRQF_DISABLED, + .dma_in_irq_description = "serial 3 dma rec", +#else + .dma_in_enabled = 0, + .dma_in_nbr = UINT_MAX, + .dma_in_irq_nbr = 0, + .dma_in_irq_flags = 0, + .dma_in_irq_description = NULL +#endif +#else + .enabled = 0, + .io_if_description = NULL, + .dma_out_enabled = 0, + .dma_in_enabled = 0 +#endif + } /* ttyS3 */ +#endif +}; + + +#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial)) + +#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER +static struct fast_timer fast_timers[NR_PORTS]; +#endif + +#ifdef CONFIG_ETRAX_SERIAL_PROC_ENTRY +#define PROCSTAT(x) x +struct ser_statistics_type { + int overrun_cnt; + int early_errors_cnt; + int ser_ints_ok_cnt; + int errors_cnt; + unsigned long int processing_flip; + unsigned long processing_flip_still_room; + unsigned long int timeout_flush_cnt; + int rx_dma_ints; + int tx_dma_ints; + int rx_tot; + int tx_tot; +}; + +static struct ser_statistics_type ser_stat[NR_PORTS]; + +#else + +#define PROCSTAT(x) + +#endif /* CONFIG_ETRAX_SERIAL_PROC_ENTRY */ + +/* RS-485 */ +#if defined(CONFIG_ETRAX_RS485) +#ifdef CONFIG_ETRAX_FAST_TIMER +static struct fast_timer fast_timers_rs485[NR_PORTS]; +#endif +#if defined(CONFIG_ETRAX_RS485_ON_PA) +static int rs485_pa_bit = CONFIG_ETRAX_RS485_ON_PA_BIT; +#endif +#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) +static int rs485_port_g_bit = CONFIG_ETRAX_RS485_ON_PORT_G_BIT; +#endif +#endif + +/* Info and macros needed for each ports extra control/status signals. */ +#define E100_STRUCT_PORT(line, pinname) \ + ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ + (R_PORT_PA_DATA): ( \ + (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \ + (R_PORT_PB_DATA):&dummy_ser[line])) + +#define E100_STRUCT_SHADOW(line, pinname) \ + ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ + (&port_pa_data_shadow): ( \ + (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \ + (&port_pb_data_shadow):&dummy_ser[line])) +#define E100_STRUCT_MASK(line, pinname) \ + ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ + (1<= 0)? \ + (1< 3.3V to RS-232 driver -> -12V on RS-232 level + * inactive = 1 -> 0V to RS-232 driver -> +12V on RS-232 level + * + * These macros returns the pin value: 0=0V, >=1 = 3.3V on ETRAX chip + */ + +/* Output */ +#define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK) +/* Input */ +#define E100_CTS_GET(info) ((info)->ioport[REG_STATUS] & E100_CTS_MASK) + +/* These are typically PA or PB and 0 means 0V, 1 means 3.3V */ +/* Is an output */ +#define E100_DTR_GET(info) ((*e100_modem_pins[(info)->line].dtr_shadow) & e100_modem_pins[(info)->line].dtr_mask) + +/* Normally inputs */ +#define E100_RI_GET(info) ((*e100_modem_pins[(info)->line].ri_port) & e100_modem_pins[(info)->line].ri_mask) +#define E100_CD_GET(info) ((*e100_modem_pins[(info)->line].cd_port) & e100_modem_pins[(info)->line].cd_mask) + +/* Input */ +#define E100_DSR_GET(info) ((*e100_modem_pins[(info)->line].dsr_port) & e100_modem_pins[(info)->line].dsr_mask) + + +/* + * tmp_buf is used as a temporary buffer by serial_write. We need to + * lock it in case the memcpy_fromfs blocks while swapping in a page, + * and some other program tries to do a serial write at the same time. + * Since the lock will only come under contention when the system is + * swapping and available memory is low, it makes sense to share one + * buffer across all the serial ports, since it significantly saves + * memory if large numbers of serial ports are open. + */ +static unsigned char *tmp_buf; +static DEFINE_MUTEX(tmp_buf_mutex); + +/* Calculate the chartime depending on baudrate, numbor of bits etc. */ +static void update_char_time(struct e100_serial * info) +{ + tcflag_t cflags = info->port.tty->termios->c_cflag; + int bits; + + /* calc. number of bits / data byte */ + /* databits + startbit and 1 stopbit */ + if ((cflags & CSIZE) == CS7) + bits = 9; + else + bits = 10; + + if (cflags & CSTOPB) /* 2 stopbits ? */ + bits++; + + if (cflags & PARENB) /* parity bit ? */ + bits++; + + /* calc timeout */ + info->char_time_usec = ((bits * 1000000) / info->baud) + 1; + info->flush_time_usec = 4*info->char_time_usec; + if (info->flush_time_usec < MIN_FLUSH_TIME_USEC) + info->flush_time_usec = MIN_FLUSH_TIME_USEC; + +} + +/* + * This function maps from the Bxxxx defines in asm/termbits.h into real + * baud rates. + */ + +static int +cflag_to_baud(unsigned int cflag) +{ + static int baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, + 4800, 9600, 19200, 38400 }; + + static int ext_baud_table[] = { + 0, 57600, 115200, 230400, 460800, 921600, 1843200, 6250000, + 0, 0, 0, 0, 0, 0, 0, 0 }; + + if (cflag & CBAUDEX) + return ext_baud_table[(cflag & CBAUD) & ~CBAUDEX]; + else + return baud_table[cflag & CBAUD]; +} + +/* and this maps to an etrax100 hardware baud constant */ + +static unsigned char +cflag_to_etrax_baud(unsigned int cflag) +{ + char retval; + + static char baud_table[] = { + -1, -1, -1, -1, -1, -1, -1, 0, 1, 2, -1, 3, 4, 5, 6, 7 }; + + static char ext_baud_table[] = { + -1, 8, 9, 10, 11, 12, 13, 14, -1, -1, -1, -1, -1, -1, -1, -1 }; + + if (cflag & CBAUDEX) + retval = ext_baud_table[(cflag & CBAUD) & ~CBAUDEX]; + else + retval = baud_table[cflag & CBAUD]; + + if (retval < 0) { + printk(KERN_WARNING "serdriver tried setting invalid baud rate, flags %x.\n", cflag); + retval = 5; /* choose default 9600 instead */ + } + + return retval | (retval << 4); /* choose same for both TX and RX */ +} + + +/* Various static support functions */ + +/* Functions to set or clear DTR/RTS on the requested line */ +/* It is complicated by the fact that RTS is a serial port register, while + * DTR might not be implemented in the HW at all, and if it is, it can be on + * any general port. + */ + + +static inline void +e100_dtr(struct e100_serial *info, int set) +{ +#ifndef CONFIG_SVINTO_SIM + unsigned char mask = e100_modem_pins[info->line].dtr_mask; + +#ifdef SERIAL_DEBUG_IO + printk("ser%i dtr %i mask: 0x%02X\n", info->line, set, mask); + printk("ser%i shadow before 0x%02X get: %i\n", + info->line, *e100_modem_pins[info->line].dtr_shadow, + E100_DTR_GET(info)); +#endif + /* DTR is active low */ + { + unsigned long flags; + + local_irq_save(flags); + *e100_modem_pins[info->line].dtr_shadow &= ~mask; + *e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask); + *e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow; + local_irq_restore(flags); + } + +#ifdef SERIAL_DEBUG_IO + printk("ser%i shadow after 0x%02X get: %i\n", + info->line, *e100_modem_pins[info->line].dtr_shadow, + E100_DTR_GET(info)); +#endif +#endif +} + +/* set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive + * 0=0V , 1=3.3V + */ +static inline void +e100_rts(struct e100_serial *info, int set) +{ +#ifndef CONFIG_SVINTO_SIM + unsigned long flags; + local_irq_save(flags); + info->rx_ctrl &= ~E100_RTS_MASK; + info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */ + info->ioport[REG_REC_CTRL] = info->rx_ctrl; + local_irq_restore(flags); +#ifdef SERIAL_DEBUG_IO + printk("ser%i rts %i\n", info->line, set); +#endif +#endif +} + + +/* If this behaves as a modem, RI and CD is an output */ +static inline void +e100_ri_out(struct e100_serial *info, int set) +{ +#ifndef CONFIG_SVINTO_SIM + /* RI is active low */ + { + unsigned char mask = e100_modem_pins[info->line].ri_mask; + unsigned long flags; + + local_irq_save(flags); + *e100_modem_pins[info->line].ri_shadow &= ~mask; + *e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask); + *e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow; + local_irq_restore(flags); + } +#endif +} +static inline void +e100_cd_out(struct e100_serial *info, int set) +{ +#ifndef CONFIG_SVINTO_SIM + /* CD is active low */ + { + unsigned char mask = e100_modem_pins[info->line].cd_mask; + unsigned long flags; + + local_irq_save(flags); + *e100_modem_pins[info->line].cd_shadow &= ~mask; + *e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask); + *e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow; + local_irq_restore(flags); + } +#endif +} + +static inline void +e100_disable_rx(struct e100_serial *info) +{ +#ifndef CONFIG_SVINTO_SIM + /* disable the receiver */ + info->ioport[REG_REC_CTRL] = + (info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); +#endif +} + +static inline void +e100_enable_rx(struct e100_serial *info) +{ +#ifndef CONFIG_SVINTO_SIM + /* enable the receiver */ + info->ioport[REG_REC_CTRL] = + (info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); +#endif +} + +/* the rx DMA uses both the dma_descr and the dma_eop interrupts */ + +static inline void +e100_disable_rxdma_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("rxdma_irq(%d): 0\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ disable_rxdma_irq %i\n", info->line)); + *R_IRQ_MASK2_CLR = (info->irq << 2) | (info->irq << 3); +} + +static inline void +e100_enable_rxdma_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("rxdma_irq(%d): 1\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ enable_rxdma_irq %i\n", info->line)); + *R_IRQ_MASK2_SET = (info->irq << 2) | (info->irq << 3); +} + +/* the tx DMA uses only dma_descr interrupt */ + +static void e100_disable_txdma_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("txdma_irq(%d): 0\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ disable_txdma_irq %i\n", info->line)); + *R_IRQ_MASK2_CLR = info->irq; +} + +static void e100_enable_txdma_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("txdma_irq(%d): 1\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ enable_txdma_irq %i\n", info->line)); + *R_IRQ_MASK2_SET = info->irq; +} + +static void e100_disable_txdma_channel(struct e100_serial *info) +{ + unsigned long flags; + + /* Disable output DMA channel for the serial port in question + * ( set to something other than serialX) + */ + local_irq_save(flags); + DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line)); + if (info->line == 0) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) == + IO_STATE(R_GEN_CONFIG, dma6, serial0)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused); + } + } else if (info->line == 1) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma8)) == + IO_STATE(R_GEN_CONFIG, dma8, serial1)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb); + } + } else if (info->line == 2) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma2)) == + IO_STATE(R_GEN_CONFIG, dma2, serial2)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0); + } + } else if (info->line == 3) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma4)) == + IO_STATE(R_GEN_CONFIG, dma4, serial3)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, par1); + } + } + *R_GEN_CONFIG = genconfig_shadow; + local_irq_restore(flags); +} + + +static void e100_enable_txdma_channel(struct e100_serial *info) +{ + unsigned long flags; + + local_irq_save(flags); + DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line)); + /* Enable output DMA channel for the serial port in question */ + if (info->line == 0) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, serial0); + } else if (info->line == 1) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, serial1); + } else if (info->line == 2) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, serial2); + } else if (info->line == 3) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3); + } + *R_GEN_CONFIG = genconfig_shadow; + local_irq_restore(flags); +} + +static void e100_disable_rxdma_channel(struct e100_serial *info) +{ + unsigned long flags; + + /* Disable input DMA channel for the serial port in question + * ( set to something other than serialX) + */ + local_irq_save(flags); + if (info->line == 0) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) == + IO_STATE(R_GEN_CONFIG, dma7, serial0)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, unused); + } + } else if (info->line == 1) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma9)) == + IO_STATE(R_GEN_CONFIG, dma9, serial1)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, usb); + } + } else if (info->line == 2) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma3)) == + IO_STATE(R_GEN_CONFIG, dma3, serial2)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, par0); + } + } else if (info->line == 3) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma5)) == + IO_STATE(R_GEN_CONFIG, dma5, serial3)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, par1); + } + } + *R_GEN_CONFIG = genconfig_shadow; + local_irq_restore(flags); +} + + +static void e100_enable_rxdma_channel(struct e100_serial *info) +{ + unsigned long flags; + + local_irq_save(flags); + /* Enable input DMA channel for the serial port in question */ + if (info->line == 0) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, serial0); + } else if (info->line == 1) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, serial1); + } else if (info->line == 2) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, serial2); + } else if (info->line == 3) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3); + } + *R_GEN_CONFIG = genconfig_shadow; + local_irq_restore(flags); +} + +#ifdef SERIAL_HANDLE_EARLY_ERRORS +/* in order to detect and fix errors on the first byte + we have to use the serial interrupts as well. */ + +static inline void +e100_disable_serial_data_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("ser_irq(%d): 0\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ disable data_irq %i\n", info->line)); + *R_IRQ_MASK1_CLR = (1U << (8+2*info->line)); +} + +static inline void +e100_enable_serial_data_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("ser_irq(%d): 1\n",info->line); + printk("**** %d = %d\n", + (8+2*info->line), + (1U << (8+2*info->line))); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ enable data_irq %i\n", info->line)); + *R_IRQ_MASK1_SET = (1U << (8+2*info->line)); +} +#endif + +static inline void +e100_disable_serial_tx_ready_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("ser_tx_irq(%d): 0\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ disable ready_irq %i\n", info->line)); + *R_IRQ_MASK1_CLR = (1U << (8+1+2*info->line)); +} + +static inline void +e100_enable_serial_tx_ready_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("ser_tx_irq(%d): 1\n",info->line); + printk("**** %d = %d\n", + (8+1+2*info->line), + (1U << (8+1+2*info->line))); +#endif + DINTR2(DEBUG_LOG(info->line,"IRQ enable ready_irq %i\n", info->line)); + *R_IRQ_MASK1_SET = (1U << (8+1+2*info->line)); +} + +static inline void e100_enable_rx_irq(struct e100_serial *info) +{ + if (info->uses_dma_in) + e100_enable_rxdma_irq(info); + else + e100_enable_serial_data_irq(info); +} +static inline void e100_disable_rx_irq(struct e100_serial *info) +{ + if (info->uses_dma_in) + e100_disable_rxdma_irq(info); + else + e100_disable_serial_data_irq(info); +} + +#if defined(CONFIG_ETRAX_RS485) +/* Enable RS-485 mode on selected port. This is UGLY. */ +static int +e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r) +{ + struct e100_serial * info = (struct e100_serial *)tty->driver_data; + +#if defined(CONFIG_ETRAX_RS485_ON_PA) + *R_PORT_PA_DATA = port_pa_data_shadow |= (1 << rs485_pa_bit); +#endif +#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + rs485_port_g_bit, 1); +#endif +#if defined(CONFIG_ETRAX_RS485_LTC1387) + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 1); + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1); +#endif + + info->rs485 = *r; + + /* Maximum delay before RTS equal to 1000 */ + if (info->rs485.delay_rts_before_send >= 1000) + info->rs485.delay_rts_before_send = 1000; + +/* printk("rts: on send = %i, after = %i, enabled = %i", + info->rs485.rts_on_send, + info->rs485.rts_after_sent, + info->rs485.enabled + ); +*/ + return 0; +} + +static int +e100_write_rs485(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct e100_serial * info = (struct e100_serial *)tty->driver_data; + int old_value = (info->rs485.flags) & SER_RS485_ENABLED; + + /* rs485 is always implicitly enabled if we're using the ioctl() + * but it doesn't have to be set in the serial_rs485 + * (to be backward compatible with old apps) + * So we store, set and restore it. + */ + info->rs485.flags |= SER_RS485_ENABLED; + /* rs_write now deals with RS485 if enabled */ + count = rs_write(tty, buf, count); + if (!old_value) + info->rs485.flags &= ~(SER_RS485_ENABLED); + return count; +} + +#ifdef CONFIG_ETRAX_FAST_TIMER +/* Timer function to toggle RTS when using FAST_TIMER */ +static void rs485_toggle_rts_timer_function(unsigned long data) +{ + struct e100_serial *info = (struct e100_serial *)data; + + fast_timers_rs485[info->line].function = NULL; + e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND)); +#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) + e100_enable_rx(info); + e100_enable_rx_irq(info); +#endif +} +#endif +#endif /* CONFIG_ETRAX_RS485 */ + +/* + * ------------------------------------------------------------ + * rs_stop() and rs_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter using the XOFF registers, as necessary. + * ------------------------------------------------------------ + */ + +static void +rs_stop(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + if (info) { + unsigned long flags; + unsigned long xoff; + + local_irq_save(flags); + DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n", + CIRC_CNT(info->xmit.head, + info->xmit.tail,SERIAL_XMIT_SIZE))); + + xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, + STOP_CHAR(info->port.tty)); + xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop); + if (tty->termios->c_iflag & IXON ) { + xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); + } + + *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; + local_irq_restore(flags); + } +} + +static void +rs_start(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + if (info) { + unsigned long flags; + unsigned long xoff; + + local_irq_save(flags); + DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n", + CIRC_CNT(info->xmit.head, + info->xmit.tail,SERIAL_XMIT_SIZE))); + xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty)); + xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); + if (tty->termios->c_iflag & IXON ) { + xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); + } + + *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; + if (!info->uses_dma_out && + info->xmit.head != info->xmit.tail && info->xmit.buf) + e100_enable_serial_tx_ready_irq(info); + + local_irq_restore(flags); + } +} + +/* + * ---------------------------------------------------------------------- + * + * Here starts the interrupt handling routines. All of the following + * subroutines are declared as inline and are folded into + * rs_interrupt(). They were separated out for readability's sake. + * + * Note: rs_interrupt() is a "fast" interrupt, which means that it + * runs with interrupts turned off. People who may want to modify + * rs_interrupt() should try to keep the interrupt handler as fast as + * possible. After you are done making modifications, it is not a bad + * idea to do: + * + * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c + * + * and look at the resulting assemble code in serial.s. + * + * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 + * ----------------------------------------------------------------------- + */ + +/* + * This routine is used by the interrupt handler to schedule + * processing in the software interrupt portion of the driver. + */ +static void rs_sched_event(struct e100_serial *info, int event) +{ + if (info->event & (1 << event)) + return; + info->event |= 1 << event; + schedule_work(&info->work); +} + +/* The output DMA channel is free - use it to send as many chars as possible + * NOTES: + * We don't pay attention to info->x_char, which means if the TTY wants to + * use XON/XOFF it will set info->x_char but we won't send any X char! + * + * To implement this, we'd just start a DMA send of 1 byte pointing at a + * buffer containing the X char, and skip updating xmit. We'd also have to + * check if the last sent char was the X char when we enter this function + * the next time, to avoid updating xmit with the sent X value. + */ + +static void +transmit_chars_dma(struct e100_serial *info) +{ + unsigned int c, sentl; + struct etrax_dma_descr *descr; + +#ifdef CONFIG_SVINTO_SIM + /* This will output too little if tail is not 0 always since + * we don't reloop to send the other part. Anyway this SHOULD be a + * no-op - transmit_chars_dma would never really be called during sim + * since rs_write does not write into the xmit buffer then. + */ + if (info->xmit.tail) + printk("Error in serial.c:transmit_chars-dma(), tail!=0\n"); + if (info->xmit.head != info->xmit.tail) { + SIMCOUT(info->xmit.buf + info->xmit.tail, + CIRC_CNT(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE)); + info->xmit.head = info->xmit.tail; /* move back head */ + info->tr_running = 0; + } + return; +#endif + /* acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ + *info->oclrintradr = + IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | + IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); + +#ifdef SERIAL_DEBUG_INTR + if (info->line == SERIAL_DEBUG_LINE) + printk("tc\n"); +#endif + if (!info->tr_running) { + /* weirdo... we shouldn't get here! */ + printk(KERN_WARNING "Achtung: transmit_chars_dma with !tr_running\n"); + return; + } + + descr = &info->tr_descr; + + /* first get the amount of bytes sent during the last DMA transfer, + and update xmit accordingly */ + + /* if the stop bit was not set, all data has been sent */ + if (!(descr->status & d_stop)) { + sentl = descr->sw_len; + } else + /* otherwise we find the amount of data sent here */ + sentl = descr->hw_len; + + DFLOW(DEBUG_LOG(info->line, "TX %i done\n", sentl)); + + /* update stats */ + info->icount.tx += sentl; + + /* update xmit buffer */ + info->xmit.tail = (info->xmit.tail + sentl) & (SERIAL_XMIT_SIZE - 1); + + /* if there is only a few chars left in the buf, wake up the blocked + write if any */ + if (CIRC_CNT(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE) < WAKEUP_CHARS) + rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); + + /* find out the largest amount of consecutive bytes we want to send now */ + + c = CIRC_CNT_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); + + /* Don't send all in one DMA transfer - divide it so we wake up + * application before all is sent + */ + + if (c >= 4*WAKEUP_CHARS) + c = c/2; + + if (c <= 0) { + /* our job here is done, don't schedule any new DMA transfer */ + info->tr_running = 0; + +#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER) + if (info->rs485.flags & SER_RS485_ENABLED) { + /* Set a short timer to toggle RTS */ + start_one_shot_timer(&fast_timers_rs485[info->line], + rs485_toggle_rts_timer_function, + (unsigned long)info, + info->char_time_usec*2, + "RS-485"); + } +#endif /* RS485 */ + return; + } + + /* ok we can schedule a dma send of c chars starting at info->xmit.tail */ + /* set up the descriptor correctly for output */ + DFLOW(DEBUG_LOG(info->line, "TX %i\n", c)); + descr->ctrl = d_int | d_eol | d_wait; /* Wait needed for tty_wait_until_sent() */ + descr->sw_len = c; + descr->buf = virt_to_phys(info->xmit.buf + info->xmit.tail); + descr->status = 0; + + *info->ofirstadr = virt_to_phys(descr); /* write to R_DMAx_FIRST */ + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start); + + /* DMA is now running (hopefully) */ +} /* transmit_chars_dma */ + +static void +start_transmit(struct e100_serial *info) +{ +#if 0 + if (info->line == SERIAL_DEBUG_LINE) + printk("x\n"); +#endif + + info->tr_descr.sw_len = 0; + info->tr_descr.hw_len = 0; + info->tr_descr.status = 0; + info->tr_running = 1; + if (info->uses_dma_out) + transmit_chars_dma(info); + else + e100_enable_serial_tx_ready_irq(info); +} /* start_transmit */ + +#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER +static int serial_fast_timer_started = 0; +static int serial_fast_timer_expired = 0; +static void flush_timeout_function(unsigned long data); +#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\ + unsigned long timer_flags; \ + local_irq_save(timer_flags); \ + if (fast_timers[info->line].function == NULL) { \ + serial_fast_timer_started++; \ + TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \ + TIMERD(DEBUG_LOG(info->line, "num started: %i\n", serial_fast_timer_started)); \ + start_one_shot_timer(&fast_timers[info->line], \ + flush_timeout_function, \ + (unsigned long)info, \ + (usec), \ + string); \ + } \ + else { \ + TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \ + } \ + local_irq_restore(timer_flags); \ +} +#define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec) + +#else +#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) +#define START_FLUSH_FAST_TIMER(info, string) +#endif + +static struct etrax_recv_buffer * +alloc_recv_buffer(unsigned int size) +{ + struct etrax_recv_buffer *buffer; + + if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC))) + return NULL; + + buffer->next = NULL; + buffer->length = 0; + buffer->error = TTY_NORMAL; + + return buffer; +} + +static void +append_recv_buffer(struct e100_serial *info, struct etrax_recv_buffer *buffer) +{ + unsigned long flags; + + local_irq_save(flags); + + if (!info->first_recv_buffer) + info->first_recv_buffer = buffer; + else + info->last_recv_buffer->next = buffer; + + info->last_recv_buffer = buffer; + + info->recv_cnt += buffer->length; + if (info->recv_cnt > info->max_recv_cnt) + info->max_recv_cnt = info->recv_cnt; + + local_irq_restore(flags); +} + +static int +add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char flag) +{ + struct etrax_recv_buffer *buffer; + if (info->uses_dma_in) { + if (!(buffer = alloc_recv_buffer(4))) + return 0; + + buffer->length = 1; + buffer->error = flag; + buffer->buffer[0] = data; + + append_recv_buffer(info, buffer); + + info->icount.rx++; + } else { + struct tty_struct *tty = info->port.tty; + tty_insert_flip_char(tty, data, flag); + info->icount.rx++; + } + + return 1; +} + +static unsigned int handle_descr_data(struct e100_serial *info, + struct etrax_dma_descr *descr, + unsigned int recvl) +{ + struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer; + + if (info->recv_cnt + recvl > 65536) { + printk(KERN_CRIT + "%s: Too much pending incoming serial data! Dropping %u bytes.\n", __func__, recvl); + return 0; + } + + buffer->length = recvl; + + if (info->errorcode == ERRCODE_SET_BREAK) + buffer->error = TTY_BREAK; + info->errorcode = 0; + + append_recv_buffer(info, buffer); + + if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE))) + panic("%s: Failed to allocate memory for receive buffer!\n", __func__); + + descr->buf = virt_to_phys(buffer->buffer); + + return recvl; +} + +static unsigned int handle_all_descr_data(struct e100_serial *info) +{ + struct etrax_dma_descr *descr; + unsigned int recvl; + unsigned int ret = 0; + + while (1) + { + descr = &info->rec_descr[info->cur_rec_descr]; + + if (descr == phys_to_virt(*info->idescradr)) + break; + + if (++info->cur_rec_descr == SERIAL_RECV_DESCRIPTORS) + info->cur_rec_descr = 0; + + /* find out how many bytes were read */ + + /* if the eop bit was not set, all data has been received */ + if (!(descr->status & d_eop)) { + recvl = descr->sw_len; + } else { + /* otherwise we find the amount of data received here */ + recvl = descr->hw_len; + } + + /* Reset the status information */ + descr->status = 0; + + DFLOW( DEBUG_LOG(info->line, "RX %lu\n", recvl); + if (info->port.tty->stopped) { + unsigned char *buf = phys_to_virt(descr->buf); + DEBUG_LOG(info->line, "rx 0x%02X\n", buf[0]); + DEBUG_LOG(info->line, "rx 0x%02X\n", buf[1]); + DEBUG_LOG(info->line, "rx 0x%02X\n", buf[2]); + } + ); + + /* update stats */ + info->icount.rx += recvl; + + ret += handle_descr_data(info, descr, recvl); + } + + return ret; +} + +static void receive_chars_dma(struct e100_serial *info) +{ + struct tty_struct *tty; + unsigned char rstat; + +#ifdef CONFIG_SVINTO_SIM + /* No receive in the simulator. Will probably be when the rest of + * the serial interface works, and this piece will just be removed. + */ + return; +#endif + + /* Acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ + *info->iclrintradr = + IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | + IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); + + tty = info->port.tty; + if (!tty) /* Something wrong... */ + return; + +#ifdef SERIAL_HANDLE_EARLY_ERRORS + if (info->uses_dma_in) + e100_enable_serial_data_irq(info); +#endif + + if (info->errorcode == ERRCODE_INSERT_BREAK) + add_char_and_flag(info, '\0', TTY_BREAK); + + handle_all_descr_data(info); + + /* Read the status register to detect errors */ + rstat = info->ioport[REG_STATUS]; + if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { + DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat)); + } + + if (rstat & SER_ERROR_MASK) { + /* If we got an error, we must reset it by reading the + * data_in field + */ + unsigned char data = info->ioport[REG_DATA]; + + PROCSTAT(ser_stat[info->line].errors_cnt++); + DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n", + ((rstat & SER_ERROR_MASK) << 8) | data); + + if (rstat & SER_PAR_ERR_MASK) + add_char_and_flag(info, data, TTY_PARITY); + else if (rstat & SER_OVERRUN_MASK) + add_char_and_flag(info, data, TTY_OVERRUN); + else if (rstat & SER_FRAMING_ERR_MASK) + add_char_and_flag(info, data, TTY_FRAME); + } + + START_FLUSH_FAST_TIMER(info, "receive_chars"); + + /* Restart the receiving DMA */ + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); +} + +static int start_recv_dma(struct e100_serial *info) +{ + struct etrax_dma_descr *descr = info->rec_descr; + struct etrax_recv_buffer *buffer; + int i; + + /* Set up the receiving descriptors */ + for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) { + if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE))) + panic("%s: Failed to allocate memory for receive buffer!\n", __func__); + + descr[i].ctrl = d_int; + descr[i].buf = virt_to_phys(buffer->buffer); + descr[i].sw_len = SERIAL_DESCR_BUF_SIZE; + descr[i].hw_len = 0; + descr[i].status = 0; + descr[i].next = virt_to_phys(&descr[i+1]); + } + + /* Link the last descriptor to the first */ + descr[i-1].next = virt_to_phys(&descr[0]); + + /* Start with the first descriptor in the list */ + info->cur_rec_descr = 0; + + /* Start the DMA */ + *info->ifirstadr = virt_to_phys(&descr[info->cur_rec_descr]); + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start); + + /* Input DMA should be running now */ + return 1; +} + +static void +start_receive(struct e100_serial *info) +{ +#ifdef CONFIG_SVINTO_SIM + /* No receive in the simulator. Will probably be when the rest of + * the serial interface works, and this piece will just be removed. + */ + return; +#endif + if (info->uses_dma_in) { + /* reset the input dma channel to be sure it works */ + + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) == + IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); + + start_recv_dma(info); + } +} + + +/* the bits in the MASK2 register are laid out like this: + DMAI_EOP DMAI_DESCR DMAO_EOP DMAO_DESCR + where I is the input channel and O is the output channel for the port. + info->irq is the bit number for the DMAO_DESCR so to check the others we + shift info->irq to the left. +*/ + +/* dma output channel interrupt handler + this interrupt is called from DMA2(ser2), DMA4(ser3), DMA6(ser0) or + DMA8(ser1) when they have finished a descriptor with the intr flag set. +*/ + +static irqreturn_t +tr_interrupt(int irq, void *dev_id) +{ + struct e100_serial *info; + unsigned long ireg; + int i; + int handled = 0; + +#ifdef CONFIG_SVINTO_SIM + /* No receive in the simulator. Will probably be when the rest of + * the serial interface works, and this piece will just be removed. + */ + { + const char *s = "What? tr_interrupt in simulator??\n"; + SIMCOUT(s,strlen(s)); + } + return IRQ_HANDLED; +#endif + + /* find out the line that caused this irq and get it from rs_table */ + + ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ + + for (i = 0; i < NR_PORTS; i++) { + info = rs_table + i; + if (!info->enabled || !info->uses_dma_out) + continue; + /* check for dma_descr (don't need to check for dma_eop in output dma for serial */ + if (ireg & info->irq) { + handled = 1; + /* we can send a new dma bunch. make it so. */ + DINTR2(DEBUG_LOG(info->line, "tr_interrupt %i\n", i)); + /* Read jiffies_usec first, + * we want this time to be as late as possible + */ + PROCSTAT(ser_stat[info->line].tx_dma_ints++); + info->last_tx_active_usec = GET_JIFFIES_USEC(); + info->last_tx_active = jiffies; + transmit_chars_dma(info); + } + + /* FIXME: here we should really check for a change in the + status lines and if so call status_handle(info) */ + } + return IRQ_RETVAL(handled); +} /* tr_interrupt */ + +/* dma input channel interrupt handler */ + +static irqreturn_t +rec_interrupt(int irq, void *dev_id) +{ + struct e100_serial *info; + unsigned long ireg; + int i; + int handled = 0; + +#ifdef CONFIG_SVINTO_SIM + /* No receive in the simulator. Will probably be when the rest of + * the serial interface works, and this piece will just be removed. + */ + { + const char *s = "What? rec_interrupt in simulator??\n"; + SIMCOUT(s,strlen(s)); + } + return IRQ_HANDLED; +#endif + + /* find out the line that caused this irq and get it from rs_table */ + + ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ + + for (i = 0; i < NR_PORTS; i++) { + info = rs_table + i; + if (!info->enabled || !info->uses_dma_in) + continue; + /* check for both dma_eop and dma_descr for the input dma channel */ + if (ireg & ((info->irq << 2) | (info->irq << 3))) { + handled = 1; + /* we have received something */ + receive_chars_dma(info); + } + + /* FIXME: here we should really check for a change in the + status lines and if so call status_handle(info) */ + } + return IRQ_RETVAL(handled); +} /* rec_interrupt */ + +static int force_eop_if_needed(struct e100_serial *info) +{ + /* We check data_avail bit to determine if data has + * arrived since last time + */ + unsigned char rstat = info->ioport[REG_STATUS]; + + /* error or datavail? */ + if (rstat & SER_ERROR_MASK) { + /* Some error has occurred. If there has been valid data, an + * EOP interrupt will be made automatically. If no data, the + * normal ser_interrupt should be enabled and handle it. + * So do nothing! + */ + DEBUG_LOG(info->line, "timeout err: rstat 0x%03X\n", + rstat | (info->line << 8)); + return 0; + } + + if (rstat & SER_DATA_AVAIL_MASK) { + /* Ok data, no error, count it */ + TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n", + rstat | (info->line << 8))); + /* Read data to clear status flags */ + (void)info->ioport[REG_DATA]; + + info->forced_eop = 0; + START_FLUSH_FAST_TIMER(info, "magic"); + return 0; + } + + /* hit the timeout, force an EOP for the input + * dma channel if we haven't already + */ + if (!info->forced_eop) { + info->forced_eop = 1; + PROCSTAT(ser_stat[info->line].timeout_flush_cnt++); + TIMERD(DEBUG_LOG(info->line, "timeout EOP %i\n", info->line)); + FORCE_EOP(info); + } + + return 1; +} + +static void flush_to_flip_buffer(struct e100_serial *info) +{ + struct tty_struct *tty; + struct etrax_recv_buffer *buffer; + unsigned long flags; + + local_irq_save(flags); + tty = info->port.tty; + + if (!tty) { + local_irq_restore(flags); + return; + } + + while ((buffer = info->first_recv_buffer) != NULL) { + unsigned int count = buffer->length; + + tty_insert_flip_string(tty, buffer->buffer, count); + info->recv_cnt -= count; + + if (count == buffer->length) { + info->first_recv_buffer = buffer->next; + kfree(buffer); + } else { + buffer->length -= count; + memmove(buffer->buffer, buffer->buffer + count, buffer->length); + buffer->error = TTY_NORMAL; + } + } + + if (!info->first_recv_buffer) + info->last_recv_buffer = NULL; + + local_irq_restore(flags); + + /* This includes a check for low-latency */ + tty_flip_buffer_push(tty); +} + +static void check_flush_timeout(struct e100_serial *info) +{ + /* Flip what we've got (if we can) */ + flush_to_flip_buffer(info); + + /* We might need to flip later, but not to fast + * since the system is busy processing input... */ + if (info->first_recv_buffer) + START_FLUSH_FAST_TIMER_TIME(info, "flip", 2000); + + /* Force eop last, since data might have come while we're processing + * and if we started the slow timer above, we won't start a fast + * below. + */ + force_eop_if_needed(info); +} + +#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER +static void flush_timeout_function(unsigned long data) +{ + struct e100_serial *info = (struct e100_serial *)data; + + fast_timers[info->line].function = NULL; + serial_fast_timer_expired++; + TIMERD(DEBUG_LOG(info->line, "flush_timout %i ", info->line)); + TIMERD(DEBUG_LOG(info->line, "num expired: %i\n", serial_fast_timer_expired)); + check_flush_timeout(info); +} + +#else + +/* dma fifo/buffer timeout handler + forces an end-of-packet for the dma input channel if no chars + have been received for CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS/100 s. +*/ + +static struct timer_list flush_timer; + +static void +timed_flush_handler(unsigned long ptr) +{ + struct e100_serial *info; + int i; + +#ifdef CONFIG_SVINTO_SIM + return; +#endif + + for (i = 0; i < NR_PORTS; i++) { + info = rs_table + i; + if (info->uses_dma_in) + check_flush_timeout(info); + } + + /* restart flush timer */ + mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS); +} +#endif + +#ifdef SERIAL_HANDLE_EARLY_ERRORS + +/* If there is an error (ie break) when the DMA is running and + * there are no bytes in the fifo the DMA is stopped and we get no + * eop interrupt. Thus we have to monitor the first bytes on a DMA + * transfer, and if it is without error we can turn the serial + * interrupts off. + */ + +/* +BREAK handling on ETRAX 100: +ETRAX will generate interrupt although there is no stop bit between the +characters. + +Depending on how long the break sequence is, the end of the breaksequence +will look differently: +| indicates start/end of a character. + +B= Break character (0x00) with framing error. +E= Error byte with parity error received after B characters. +F= "Faked" valid byte received immediately after B characters. +V= Valid byte + +1. + B BL ___________________________ V +.._|__________|__________| |valid data | + +Multiple frame errors with data == 0x00 (B), +the timing matches up "perfectly" so no extra ending char is detected. +The RXD pin is 1 in the last interrupt, in that case +we set info->errorcode = ERRCODE_INSERT_BREAK, but we can't really +know if another byte will come and this really is case 2. below +(e.g F=0xFF or 0xFE) +If RXD pin is 0 we can expect another character (see 2. below). + + +2. + + B B E or F__________________..__ V +.._|__________|__________|______ | |valid data + "valid" or + parity error + +Multiple frame errors with data == 0x00 (B), +but the part of the break trigs is interpreted as a start bit (and possibly +some 0 bits followed by a number of 1 bits and a stop bit). +Depending on parity settings etc. this last character can be either +a fake "valid" char (F) or have a parity error (E). + +If the character is valid it will be put in the buffer, +we set info->errorcode = ERRCODE_SET_BREAK so the receive interrupt +will set the flags so the tty will handle it, +if it's an error byte it will not be put in the buffer +and we set info->errorcode = ERRCODE_INSERT_BREAK. + +To distinguish a V byte in 1. from an F byte in 2. we keep a timestamp +of the last faulty char (B) and compares it with the current time: +If the time elapsed time is less then 2*char_time_usec we will assume +it's a faked F char and not a Valid char and set +info->errorcode = ERRCODE_SET_BREAK. + +Flaws in the above solution: +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +We use the timer to distinguish a F character from a V character, +if a V character is to close after the break we might make the wrong decision. + +TODO: The break will be delayed until an F or V character is received. + +*/ + +static +struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info) +{ + unsigned long data_read; + struct tty_struct *tty = info->port.tty; + + if (!tty) { + printk("!NO TTY!\n"); + return info; + } + + /* Read data and status at the same time */ + data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); +more_data: + if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) { + DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); + } + DINTR2(DEBUG_LOG(info->line, "ser_rx %c\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read))); + + if (data_read & ( IO_MASK(R_SERIAL0_READ, framing_err) | + IO_MASK(R_SERIAL0_READ, par_err) | + IO_MASK(R_SERIAL0_READ, overrun) )) { + /* An error */ + info->last_rx_active_usec = GET_JIFFIES_USEC(); + info->last_rx_active = jiffies; + DINTR1(DEBUG_LOG(info->line, "ser_rx err stat_data %04X\n", data_read)); + DLOG_INT_TRIG( + if (!log_int_trig1_pos) { + log_int_trig1_pos = log_int_pos; + log_int(rdpc(), 0, 0); + } + ); + + + if ( ((data_read & IO_MASK(R_SERIAL0_READ, data_in)) == 0) && + (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) ) { + /* Most likely a break, but we get interrupts over and + * over again. + */ + + if (!info->break_detected_cnt) { + DEBUG_LOG(info->line, "#BRK start\n", 0); + } + if (data_read & IO_MASK(R_SERIAL0_READ, rxd)) { + /* The RX pin is high now, so the break + * must be over, but.... + * we can't really know if we will get another + * last byte ending the break or not. + * And we don't know if the byte (if any) will + * have an error or look valid. + */ + DEBUG_LOG(info->line, "# BL BRK\n", 0); + info->errorcode = ERRCODE_INSERT_BREAK; + } + info->break_detected_cnt++; + } else { + /* The error does not look like a break, but could be + * the end of one + */ + if (info->break_detected_cnt) { + DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); + info->errorcode = ERRCODE_INSERT_BREAK; + } else { + unsigned char data = IO_EXTRACT(R_SERIAL0_READ, + data_in, data_read); + char flag = TTY_NORMAL; + if (info->errorcode == ERRCODE_INSERT_BREAK) { + struct tty_struct *tty = info->port.tty; + tty_insert_flip_char(tty, 0, flag); + info->icount.rx++; + } + + if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) { + info->icount.parity++; + flag = TTY_PARITY; + } else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) { + info->icount.overrun++; + flag = TTY_OVERRUN; + } else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) { + info->icount.frame++; + flag = TTY_FRAME; + } + tty_insert_flip_char(tty, data, flag); + info->errorcode = 0; + } + info->break_detected_cnt = 0; + } + } else if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { + /* No error */ + DLOG_INT_TRIG( + if (!log_int_trig1_pos) { + if (log_int_pos >= log_int_size) { + log_int_pos = 0; + } + log_int_trig0_pos = log_int_pos; + log_int(rdpc(), 0, 0); + } + ); + tty_insert_flip_char(tty, + IO_EXTRACT(R_SERIAL0_READ, data_in, data_read), + TTY_NORMAL); + } else { + DEBUG_LOG(info->line, "ser_rx int but no data_avail %08lX\n", data_read); + } + + + info->icount.rx++; + data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); + if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { + DEBUG_LOG(info->line, "ser_rx %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read)); + goto more_data; + } + + tty_flip_buffer_push(info->port.tty); + return info; +} + +static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) +{ + unsigned char rstat; + +#ifdef SERIAL_DEBUG_INTR + printk("Interrupt from serport %d\n", i); +#endif +/* DEBUG_LOG(info->line, "ser_interrupt stat %03X\n", rstat | (i << 8)); */ + if (!info->uses_dma_in) { + return handle_ser_rx_interrupt_no_dma(info); + } + /* DMA is used */ + rstat = info->ioport[REG_STATUS]; + if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { + DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); + } + + if (rstat & SER_ERROR_MASK) { + unsigned char data; + + info->last_rx_active_usec = GET_JIFFIES_USEC(); + info->last_rx_active = jiffies; + /* If we got an error, we must reset it by reading the + * data_in field + */ + data = info->ioport[REG_DATA]; + DINTR1(DEBUG_LOG(info->line, "ser_rx! %c\n", data)); + DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat)); + if (!data && (rstat & SER_FRAMING_ERR_MASK)) { + /* Most likely a break, but we get interrupts over and + * over again. + */ + + if (!info->break_detected_cnt) { + DEBUG_LOG(info->line, "#BRK start\n", 0); + } + if (rstat & SER_RXD_MASK) { + /* The RX pin is high now, so the break + * must be over, but.... + * we can't really know if we will get another + * last byte ending the break or not. + * And we don't know if the byte (if any) will + * have an error or look valid. + */ + DEBUG_LOG(info->line, "# BL BRK\n", 0); + info->errorcode = ERRCODE_INSERT_BREAK; + } + info->break_detected_cnt++; + } else { + /* The error does not look like a break, but could be + * the end of one + */ + if (info->break_detected_cnt) { + DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); + info->errorcode = ERRCODE_INSERT_BREAK; + } else { + if (info->errorcode == ERRCODE_INSERT_BREAK) { + info->icount.brk++; + add_char_and_flag(info, '\0', TTY_BREAK); + } + + if (rstat & SER_PAR_ERR_MASK) { + info->icount.parity++; + add_char_and_flag(info, data, TTY_PARITY); + } else if (rstat & SER_OVERRUN_MASK) { + info->icount.overrun++; + add_char_and_flag(info, data, TTY_OVERRUN); + } else if (rstat & SER_FRAMING_ERR_MASK) { + info->icount.frame++; + add_char_and_flag(info, data, TTY_FRAME); + } + + info->errorcode = 0; + } + info->break_detected_cnt = 0; + DEBUG_LOG(info->line, "#iERR s d %04X\n", + ((rstat & SER_ERROR_MASK) << 8) | data); + } + PROCSTAT(ser_stat[info->line].early_errors_cnt++); + } else { /* It was a valid byte, now let the DMA do the rest */ + unsigned long curr_time_u = GET_JIFFIES_USEC(); + unsigned long curr_time = jiffies; + + if (info->break_detected_cnt) { + /* Detect if this character is a new valid char or the + * last char in a break sequence: If LSBits are 0 and + * MSBits are high AND the time is close to the + * previous interrupt we should discard it. + */ + long elapsed_usec = + (curr_time - info->last_rx_active) * (1000000/HZ) + + curr_time_u - info->last_rx_active_usec; + if (elapsed_usec < 2*info->char_time_usec) { + DEBUG_LOG(info->line, "FBRK %i\n", info->line); + /* Report as BREAK (error) and let + * receive_chars_dma() handle it + */ + info->errorcode = ERRCODE_SET_BREAK; + } else { + DEBUG_LOG(info->line, "Not end of BRK (V)%i\n", info->line); + } + DEBUG_LOG(info->line, "num brk %i\n", info->break_detected_cnt); + } + +#ifdef SERIAL_DEBUG_INTR + printk("** OK, disabling ser_interrupts\n"); +#endif + e100_disable_serial_data_irq(info); + DINTR2(DEBUG_LOG(info->line, "ser_rx OK %d\n", info->line)); + info->break_detected_cnt = 0; + + PROCSTAT(ser_stat[info->line].ser_ints_ok_cnt++); + } + /* Restarting the DMA never hurts */ + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); + START_FLUSH_FAST_TIMER(info, "ser_int"); + return info; +} /* handle_ser_rx_interrupt */ + +static void handle_ser_tx_interrupt(struct e100_serial *info) +{ + unsigned long flags; + + if (info->x_char) { + unsigned char rstat; + DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char)); + local_irq_save(flags); + rstat = info->ioport[REG_STATUS]; + DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); + + info->ioport[REG_TR_DATA] = info->x_char; + info->icount.tx++; + info->x_char = 0; + /* We must enable since it is disabled in ser_interrupt */ + e100_enable_serial_tx_ready_irq(info); + local_irq_restore(flags); + return; + } + if (info->uses_dma_out) { + unsigned char rstat; + int i; + /* We only use normal tx interrupt when sending x_char */ + DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0)); + local_irq_save(flags); + rstat = info->ioport[REG_STATUS]; + DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); + e100_disable_serial_tx_ready_irq(info); + if (info->port.tty->stopped) + rs_stop(info->port.tty); + /* Enable the DMA channel and tell it to continue */ + e100_enable_txdma_channel(info); + /* Wait 12 cycles before doing the DMA command */ + for(i = 6; i > 0; i--) + nop(); + + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue); + local_irq_restore(flags); + return; + } + /* Normal char-by-char interrupt */ + if (info->xmit.head == info->xmit.tail + || info->port.tty->stopped + || info->port.tty->hw_stopped) { + DFLOW(DEBUG_LOG(info->line, "tx_int: stopped %i\n", + info->port.tty->stopped)); + e100_disable_serial_tx_ready_irq(info); + info->tr_running = 0; + return; + } + DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail])); + /* Send a byte, rs485 timing is critical so turn of ints */ + local_irq_save(flags); + info->ioport[REG_TR_DATA] = info->xmit.buf[info->xmit.tail]; + info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1); + info->icount.tx++; + if (info->xmit.head == info->xmit.tail) { +#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER) + if (info->rs485.flags & SER_RS485_ENABLED) { + /* Set a short timer to toggle RTS */ + start_one_shot_timer(&fast_timers_rs485[info->line], + rs485_toggle_rts_timer_function, + (unsigned long)info, + info->char_time_usec*2, + "RS-485"); + } +#endif /* RS485 */ + info->last_tx_active_usec = GET_JIFFIES_USEC(); + info->last_tx_active = jiffies; + e100_disable_serial_tx_ready_irq(info); + info->tr_running = 0; + DFLOW(DEBUG_LOG(info->line, "tx_int: stop2\n", 0)); + } else { + /* We must enable since it is disabled in ser_interrupt */ + e100_enable_serial_tx_ready_irq(info); + } + local_irq_restore(flags); + + if (CIRC_CNT(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE) < WAKEUP_CHARS) + rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); + +} /* handle_ser_tx_interrupt */ + +/* result of time measurements: + * RX duration 54-60 us when doing something, otherwise 6-9 us + * ser_int duration: just sending: 8-15 us normally, up to 73 us + */ +static irqreturn_t +ser_interrupt(int irq, void *dev_id) +{ + static volatile int tx_started = 0; + struct e100_serial *info; + int i; + unsigned long flags; + unsigned long irq_mask1_rd; + unsigned long data_mask = (1 << (8+2*0)); /* ser0 data_avail */ + int handled = 0; + static volatile unsigned long reentered_ready_mask = 0; + + local_irq_save(flags); + irq_mask1_rd = *R_IRQ_MASK1_RD; + /* First handle all rx interrupts with ints disabled */ + info = rs_table; + irq_mask1_rd &= e100_ser_int_mask; + for (i = 0; i < NR_PORTS; i++) { + /* Which line caused the data irq? */ + if (irq_mask1_rd & data_mask) { + handled = 1; + handle_ser_rx_interrupt(info); + } + info += 1; + data_mask <<= 2; + } + /* Handle tx interrupts with interrupts enabled so we + * can take care of new data interrupts while transmitting + * We protect the tx part with the tx_started flag. + * We disable the tr_ready interrupts we are about to handle and + * unblock the serial interrupt so new serial interrupts may come. + * + * If we get a new interrupt: + * - it migth be due to synchronous serial ports. + * - serial irq will be blocked by general irq handler. + * - async data will be handled above (sync will be ignored). + * - tx_started flag will prevent us from trying to send again and + * we will exit fast - no need to unblock serial irq. + * - Next (sync) serial interrupt handler will be runned with + * disabled interrupt due to restore_flags() at end of function, + * so sync handler will not be preempted or reentered. + */ + if (!tx_started) { + unsigned long ready_mask; + unsigned long + tx_started = 1; + /* Only the tr_ready interrupts left */ + irq_mask1_rd &= (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser1_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser2_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser3_ready)); + while (irq_mask1_rd) { + /* Disable those we are about to handle */ + *R_IRQ_MASK1_CLR = irq_mask1_rd; + /* Unblock the serial interrupt */ + *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set); + + local_irq_enable(); + ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */ + info = rs_table; + for (i = 0; i < NR_PORTS; i++) { + /* Which line caused the ready irq? */ + if (irq_mask1_rd & ready_mask) { + handled = 1; + handle_ser_tx_interrupt(info); + } + info += 1; + ready_mask <<= 2; + } + /* handle_ser_tx_interrupt enables tr_ready interrupts */ + local_irq_disable(); + /* Handle reentered TX interrupt */ + irq_mask1_rd = reentered_ready_mask; + } + local_irq_disable(); + tx_started = 0; + } else { + unsigned long ready_mask; + ready_mask = irq_mask1_rd & (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser1_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser2_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser3_ready)); + if (ready_mask) { + reentered_ready_mask |= ready_mask; + /* Disable those we are about to handle */ + *R_IRQ_MASK1_CLR = ready_mask; + DFLOW(DEBUG_LOG(SERIAL_DEBUG_LINE, "ser_int reentered with TX %X\n", ready_mask)); + } + } + + local_irq_restore(flags); + return IRQ_RETVAL(handled); +} /* ser_interrupt */ +#endif + +/* + * ------------------------------------------------------------------- + * Here ends the serial interrupt routines. + * ------------------------------------------------------------------- + */ + +/* + * This routine is used to handle the "bottom half" processing for the + * serial driver, known also the "software interrupt" processing. + * This processing is done at the kernel interrupt level, after the + * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This + * is where time-consuming activities which can not be done in the + * interrupt driver proper are done; the interrupt driver schedules + * them using rs_sched_event(), and they get done here. + */ +static void +do_softint(struct work_struct *work) +{ + struct e100_serial *info; + struct tty_struct *tty; + + info = container_of(work, struct e100_serial, work); + + tty = info->port.tty; + if (!tty) + return; + + if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) + tty_wakeup(tty); +} + +static int +startup(struct e100_serial * info) +{ + unsigned long flags; + unsigned long xmit_page; + int i; + + xmit_page = get_zeroed_page(GFP_KERNEL); + if (!xmit_page) + return -ENOMEM; + + local_irq_save(flags); + + /* if it was already initialized, skip this */ + + if (info->flags & ASYNC_INITIALIZED) { + local_irq_restore(flags); + free_page(xmit_page); + return 0; + } + + if (info->xmit.buf) + free_page(xmit_page); + else + info->xmit.buf = (unsigned char *) xmit_page; + +#ifdef SERIAL_DEBUG_OPEN + printk("starting up ttyS%d (xmit_buf 0x%p)...\n", info->line, info->xmit.buf); +#endif + +#ifdef CONFIG_SVINTO_SIM + /* Bits and pieces collected from below. Better to have them + in one ifdef:ed clause than to mix in a lot of ifdefs, + right? */ + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->xmit.head = info->xmit.tail = 0; + info->first_recv_buffer = info->last_recv_buffer = NULL; + info->recv_cnt = info->max_recv_cnt = 0; + + for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) + info->rec_descr[i].buf = NULL; + + /* No real action in the simulator, but may set info important + to ioctl. */ + change_speed(info); +#else + + /* + * Clear the FIFO buffers and disable them + * (they will be reenabled in change_speed()) + */ + + /* + * Reset the DMA channels and make sure their interrupts are cleared + */ + + if (info->dma_in_enabled) { + info->uses_dma_in = 1; + e100_enable_rxdma_channel(info); + + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + + /* Wait until reset cycle is complete */ + while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) == + IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); + + /* Make sure the irqs are cleared */ + *info->iclrintradr = + IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | + IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); + } else { + e100_disable_rxdma_channel(info); + } + + if (info->dma_out_enabled) { + info->uses_dma_out = 1; + e100_enable_txdma_channel(info); + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + + while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) == + IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); + + /* Make sure the irqs are cleared */ + *info->oclrintradr = + IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | + IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); + } else { + e100_disable_txdma_channel(info); + } + + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->xmit.head = info->xmit.tail = 0; + info->first_recv_buffer = info->last_recv_buffer = NULL; + info->recv_cnt = info->max_recv_cnt = 0; + + for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) + info->rec_descr[i].buf = 0; + + /* + * and set the speed and other flags of the serial port + * this will start the rx/tx as well + */ +#ifdef SERIAL_HANDLE_EARLY_ERRORS + e100_enable_serial_data_irq(info); +#endif + change_speed(info); + + /* dummy read to reset any serial errors */ + + (void)info->ioport[REG_DATA]; + + /* enable the interrupts */ + if (info->uses_dma_out) + e100_enable_txdma_irq(info); + + e100_enable_rx_irq(info); + + info->tr_running = 0; /* to be sure we don't lock up the transmitter */ + + /* setup the dma input descriptor and start dma */ + + start_receive(info); + + /* for safety, make sure the descriptors last result is 0 bytes written */ + + info->tr_descr.sw_len = 0; + info->tr_descr.hw_len = 0; + info->tr_descr.status = 0; + + /* enable RTS/DTR last */ + + e100_rts(info, 1); + e100_dtr(info, 1); + +#endif /* CONFIG_SVINTO_SIM */ + + info->flags |= ASYNC_INITIALIZED; + + local_irq_restore(flags); + return 0; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void +shutdown(struct e100_serial * info) +{ + unsigned long flags; + struct etrax_dma_descr *descr = info->rec_descr; + struct etrax_recv_buffer *buffer; + int i; + +#ifndef CONFIG_SVINTO_SIM + /* shut down the transmitter and receiver */ + DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line)); + e100_disable_rx(info); + info->ioport[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40); + + /* disable interrupts, reset dma channels */ + if (info->uses_dma_in) { + e100_disable_rxdma_irq(info); + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + info->uses_dma_in = 0; + } else { + e100_disable_serial_data_irq(info); + } + + if (info->uses_dma_out) { + e100_disable_txdma_irq(info); + info->tr_running = 0; + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + info->uses_dma_out = 0; + } else { + e100_disable_serial_tx_ready_irq(info); + info->tr_running = 0; + } + +#endif /* CONFIG_SVINTO_SIM */ + + if (!(info->flags & ASYNC_INITIALIZED)) + return; + +#ifdef SERIAL_DEBUG_OPEN + printk("Shutting down serial port %d (irq %d)....\n", info->line, + info->irq); +#endif + + local_irq_save(flags); + + if (info->xmit.buf) { + free_page((unsigned long)info->xmit.buf); + info->xmit.buf = NULL; + } + + for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) + if (descr[i].buf) { + buffer = phys_to_virt(descr[i].buf) - sizeof *buffer; + kfree(buffer); + descr[i].buf = 0; + } + + if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) { + /* hang up DTR and RTS if HUPCL is enabled */ + e100_dtr(info, 0); + e100_rts(info, 0); /* could check CRTSCTS before doing this */ + } + + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; + local_irq_restore(flags); +} + + +/* change baud rate and other assorted parameters */ + +static void +change_speed(struct e100_serial *info) +{ + unsigned int cflag; + unsigned long xoff; + unsigned long flags; + /* first some safety checks */ + + if (!info->port.tty || !info->port.tty->termios) + return; + if (!info->ioport) + return; + + cflag = info->port.tty->termios->c_cflag; + + /* possibly, the tx/rx should be disabled first to do this safely */ + + /* change baud-rate and write it to the hardware */ + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) { + /* Special baudrate */ + u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */ + unsigned long alt_source = + IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) | + IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal); + /* R_ALT_SER_BAUDRATE selects the source */ + DBAUD(printk("Custom baudrate: baud_base/divisor %lu/%i\n", + (unsigned long)info->baud_base, info->custom_divisor)); + if (info->baud_base == SERIAL_PRESCALE_BASE) { + /* 0, 2-65535 (0=65536) */ + u16 divisor = info->custom_divisor; + /* R_SERIAL_PRESCALE (upper 16 bits of R_CLOCK_PRESCALE) */ + /* baudrate is 3.125MHz/custom_divisor */ + alt_source = + IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, prescale) | + IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, prescale); + alt_source = 0x11; + DBAUD(printk("Writing SERIAL_PRESCALE: divisor %i\n", divisor)); + *R_SERIAL_PRESCALE = divisor; + info->baud = SERIAL_PRESCALE_BASE/divisor; + } +#ifdef CONFIG_ETRAX_EXTERN_PB6CLK_ENABLED + else if ((info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8 && + info->custom_divisor == 1) || + (info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ && + info->custom_divisor == 8)) { + /* ext_clk selected */ + alt_source = + IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, extern) | + IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, extern); + DBAUD(printk("using external baudrate: %lu\n", CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8)); + info->baud = CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8; + } +#endif + else + { + /* Bad baudbase, we don't support using timer0 + * for baudrate. + */ + printk(KERN_WARNING "Bad baud_base/custom_divisor: %lu/%i\n", + (unsigned long)info->baud_base, info->custom_divisor); + } + r_alt_ser_baudrate_shadow &= ~mask; + r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8)); + *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow; + } else { + /* Normal baudrate */ + /* Make sure we use normal baudrate */ + u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */ + unsigned long alt_source = + IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) | + IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal); + r_alt_ser_baudrate_shadow &= ~mask; + r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8)); +#ifndef CONFIG_SVINTO_SIM + *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow; +#endif /* CONFIG_SVINTO_SIM */ + + info->baud = cflag_to_baud(cflag); +#ifndef CONFIG_SVINTO_SIM + info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag); +#endif /* CONFIG_SVINTO_SIM */ + } + +#ifndef CONFIG_SVINTO_SIM + /* start with default settings and then fill in changes */ + local_irq_save(flags); + /* 8 bit, no/even parity */ + info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) | + IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) | + IO_MASK(R_SERIAL0_REC_CTRL, rec_par)); + + /* 8 bit, no/even parity, 1 stop bit, no cts */ + info->tx_ctrl &= ~(IO_MASK(R_SERIAL0_TR_CTRL, tr_bitnr) | + IO_MASK(R_SERIAL0_TR_CTRL, tr_par_en) | + IO_MASK(R_SERIAL0_TR_CTRL, tr_par) | + IO_MASK(R_SERIAL0_TR_CTRL, stop_bits) | + IO_MASK(R_SERIAL0_TR_CTRL, auto_cts)); + + if ((cflag & CSIZE) == CS7) { + /* set 7 bit mode */ + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit); + info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit); + } + + if (cflag & CSTOPB) { + /* set 2 stop bit mode */ + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, stop_bits, two_bits); + } + + if (cflag & PARENB) { + /* enable parity */ + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable); + info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable); + } + + if (cflag & CMSPAR) { + /* enable stick parity, PARODD mean Mark which matches ETRAX */ + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_stick_par, stick); + info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, stick); + } + if (cflag & PARODD) { + /* set odd parity (or Mark if CMSPAR) */ + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par, odd); + info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd); + } + + if (cflag & CRTSCTS) { + /* enable automatic CTS handling */ + DFLOW(DEBUG_LOG(info->line, "FLOW auto_cts enabled\n", 0)); + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, active); + } + + /* make sure the tx and rx are enabled */ + + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable); + info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable); + + /* actually write the control regs to the hardware */ + + info->ioport[REG_TR_CTRL] = info->tx_ctrl; + info->ioport[REG_REC_CTRL] = info->rx_ctrl; + xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty)); + xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); + if (info->port.tty->termios->c_iflag & IXON ) { + DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n", + STOP_CHAR(info->port.tty))); + xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); + } + + *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; + local_irq_restore(flags); +#endif /* !CONFIG_SVINTO_SIM */ + + update_char_time(info); + +} /* change_speed */ + +/* start transmitting chars NOW */ + +static void +rs_flush_chars(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + if (info->tr_running || + info->xmit.head == info->xmit.tail || + tty->stopped || + tty->hw_stopped || + !info->xmit.buf) + return; + +#ifdef SERIAL_DEBUG_FLOW + printk("rs_flush_chars\n"); +#endif + + /* this protection might not exactly be necessary here */ + + local_irq_save(flags); + start_transmit(info); + local_irq_restore(flags); +} + +static int rs_raw_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + int c, ret = 0; + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + /* first some sanity checks */ + + if (!tty || !info->xmit.buf || !tmp_buf) + return 0; + +#ifdef SERIAL_DEBUG_DATA + if (info->line == SERIAL_DEBUG_LINE) + printk("rs_raw_write (%d), status %d\n", + count, info->ioport[REG_STATUS]); +#endif + +#ifdef CONFIG_SVINTO_SIM + /* Really simple. The output is here and now. */ + SIMCOUT(buf, count); + return count; +#endif + local_save_flags(flags); + DFLOW(DEBUG_LOG(info->line, "write count %i ", count)); + DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty))); + + + /* The local_irq_disable/restore_flags pairs below are needed + * because the DMA interrupt handler moves the info->xmit values. + * the memcpy needs to be in the critical region unfortunately, + * because we need to read xmit values, memcpy, write xmit values + * in one atomic operation... this could perhaps be avoided by + * more clever design. + */ + local_irq_disable(); + while (count) { + c = CIRC_SPACE_TO_END(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE); + + if (count < c) + c = count; + if (c <= 0) + break; + + memcpy(info->xmit.buf + info->xmit.head, buf, c); + info->xmit.head = (info->xmit.head + c) & + (SERIAL_XMIT_SIZE-1); + buf += c; + count -= c; + ret += c; + } + local_irq_restore(flags); + + /* enable transmitter if not running, unless the tty is stopped + * this does not need IRQ protection since if tr_running == 0 + * the IRQ's are not running anyway for this port. + */ + DFLOW(DEBUG_LOG(info->line, "write ret %i\n", ret)); + + if (info->xmit.head != info->xmit.tail && + !tty->stopped && + !tty->hw_stopped && + !info->tr_running) { + start_transmit(info); + } + + return ret; +} /* raw_raw_write() */ + +static int +rs_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ +#if defined(CONFIG_ETRAX_RS485) + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + + if (info->rs485.flags & SER_RS485_ENABLED) + { + /* If we are in RS-485 mode, we need to toggle RTS and disable + * the receiver before initiating a DMA transfer + */ +#ifdef CONFIG_ETRAX_FAST_TIMER + /* Abort any started timer */ + fast_timers_rs485[info->line].function = NULL; + del_fast_timer(&fast_timers_rs485[info->line]); +#endif + e100_rts(info, (info->rs485.flags & SER_RS485_RTS_ON_SEND)); +#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) + e100_disable_rx(info); + e100_enable_rx_irq(info); +#endif + if ((info->rs485.flags & SER_RS485_RTS_BEFORE_SEND) && + (info->rs485.delay_rts_before_send > 0)) + msleep(info->rs485.delay_rts_before_send); + } +#endif /* CONFIG_ETRAX_RS485 */ + + count = rs_raw_write(tty, buf, count); + +#if defined(CONFIG_ETRAX_RS485) + if (info->rs485.flags & SER_RS485_ENABLED) + { + unsigned int val; + /* If we are in RS-485 mode the following has to be done: + * wait until DMA is ready + * wait on transmit shift register + * toggle RTS + * enable the receiver + */ + + /* Sleep until all sent */ + tty_wait_until_sent(tty, 0); +#ifdef CONFIG_ETRAX_FAST_TIMER + /* Now sleep a little more so that shift register is empty */ + schedule_usleep(info->char_time_usec * 2); +#endif + /* wait on transmit shift register */ + do{ + get_lsr_info(info, &val); + }while (!(val & TIOCSER_TEMT)); + + e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND)); + +#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) + e100_enable_rx(info); + e100_enable_rxdma_irq(info); +#endif + } +#endif /* CONFIG_ETRAX_RS485 */ + + return count; +} /* rs_write */ + + +/* how much space is available in the xmit buffer? */ + +static int +rs_write_room(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + + return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); +} + +/* How many chars are in the xmit buffer? + * This does not include any chars in the transmitter FIFO. + * Use wait_until_sent for waiting for FIFO drain. + */ + +static int +rs_chars_in_buffer(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + + return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); +} + +/* discard everything in the xmit buffer */ + +static void +rs_flush_buffer(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + local_irq_save(flags); + info->xmit.head = info->xmit.tail = 0; + local_irq_restore(flags); + + tty_wakeup(tty); +} + +/* + * This function is used to send a high-priority XON/XOFF character to + * the device + * + * Since we use DMA we don't check for info->x_char in transmit_chars_dma(), + * but we do it in handle_ser_tx_interrupt(). + * We disable DMA channel and enable tx ready interrupt and write the + * character when possible. + */ +static void rs_send_xchar(struct tty_struct *tty, char ch) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + local_irq_save(flags); + if (info->uses_dma_out) { + /* Put the DMA on hold and disable the channel */ + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold); + while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) != + IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, hold)); + e100_disable_txdma_channel(info); + } + + /* Must make sure transmitter is not stopped before we can transmit */ + if (tty->stopped) + rs_start(tty); + + /* Enable manual transmit interrupt and send from there */ + DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch)); + info->x_char = ch; + e100_enable_serial_tx_ready_irq(info); + local_irq_restore(flags); +} + +/* + * ------------------------------------------------------------ + * rs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void +rs_throttle(struct tty_struct * tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("throttle %s: %lu....\n", tty_name(tty, buf), + (unsigned long)tty->ldisc.chars_in_buffer(tty)); +#endif + DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty))); + + /* Do RTS before XOFF since XOFF might take some time */ + if (tty->termios->c_cflag & CRTSCTS) { + /* Turn off RTS line */ + e100_rts(info, 0); + } + if (I_IXOFF(tty)) + rs_send_xchar(tty, STOP_CHAR(tty)); + +} + +static void +rs_unthrottle(struct tty_struct * tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("unthrottle %s: %lu....\n", tty_name(tty, buf), + (unsigned long)tty->ldisc.chars_in_buffer(tty)); +#endif + DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty))); + DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count)); + /* Do RTS before XOFF since XOFF might take some time */ + if (tty->termios->c_cflag & CRTSCTS) { + /* Assert RTS line */ + e100_rts(info, 1); + } + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + rs_send_xchar(tty, START_CHAR(tty)); + } + +} + +/* + * ------------------------------------------------------------ + * rs_ioctl() and friends + * ------------------------------------------------------------ + */ + +static int +get_serial_info(struct e100_serial * info, + struct serial_struct * retinfo) +{ + struct serial_struct tmp; + + /* this is all probably wrong, there are a lot of fields + * here that we don't have in e100_serial and maybe we + * should set them to something else than 0. + */ + + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tmp.type = info->type; + tmp.line = info->line; + tmp.port = (int)info->ioport; + tmp.irq = info->irq; + tmp.flags = info->flags; + tmp.baud_base = info->baud_base; + tmp.close_delay = info->close_delay; + tmp.closing_wait = info->closing_wait; + tmp.custom_divisor = info->custom_divisor; + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int +set_serial_info(struct e100_serial *info, + struct serial_struct *new_info) +{ + struct serial_struct new_serial; + struct e100_serial old_info; + int retval = 0; + + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; + + old_info = *info; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.type != info->type) || + (new_serial.close_delay != info->close_delay) || + ((new_serial.flags & ~ASYNC_USR_MASK) != + (info->flags & ~ASYNC_USR_MASK))) + return -EPERM; + info->flags = ((info->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + goto check_and_exit; + } + + if (info->count > 1) + return -EBUSY; + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + info->baud_base = new_serial.baud_base; + info->flags = ((info->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + info->custom_divisor = new_serial.custom_divisor; + info->type = new_serial.type; + info->close_delay = new_serial.close_delay; + info->closing_wait = new_serial.closing_wait; + info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + check_and_exit: + if (info->flags & ASYNC_INITIALIZED) { + change_speed(info); + } else + retval = startup(info); + return retval; +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int +get_lsr_info(struct e100_serial * info, unsigned int *value) +{ + unsigned int result = TIOCSER_TEMT; +#ifndef CONFIG_SVINTO_SIM + unsigned long curr_time = jiffies; + unsigned long curr_time_usec = GET_JIFFIES_USEC(); + unsigned long elapsed_usec = + (curr_time - info->last_tx_active) * 1000000/HZ + + curr_time_usec - info->last_tx_active_usec; + + if (info->xmit.head != info->xmit.tail || + elapsed_usec < 2*info->char_time_usec) { + result = 0; + } +#endif + + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + return 0; +} + +#ifdef SERIAL_DEBUG_IO +struct state_str +{ + int state; + const char *str; +}; + +const struct state_str control_state_str[] = { + {TIOCM_DTR, "DTR" }, + {TIOCM_RTS, "RTS"}, + {TIOCM_ST, "ST?" }, + {TIOCM_SR, "SR?" }, + {TIOCM_CTS, "CTS" }, + {TIOCM_CD, "CD" }, + {TIOCM_RI, "RI" }, + {TIOCM_DSR, "DSR" }, + {0, NULL } +}; + +char *get_control_state_str(int MLines, char *s) +{ + int i = 0; + + s[0]='\0'; + while (control_state_str[i].str != NULL) { + if (MLines & control_state_str[i].state) { + if (s[0] != '\0') { + strcat(s, ", "); + } + strcat(s, control_state_str[i].str); + } + i++; + } + return s; +} +#endif + +static int +rs_break(struct tty_struct *tty, int break_state) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + if (!info->ioport) + return -EIO; + + local_irq_save(flags); + if (break_state == -1) { + /* Go to manual mode and set the txd pin to 0 */ + /* Clear bit 7 (txd) and 6 (tr_enable) */ + info->tx_ctrl &= 0x3F; + } else { + /* Set bit 7 (txd) and 6 (tr_enable) */ + info->tx_ctrl |= (0x80 | 0x40); + } + info->ioport[REG_TR_CTRL] = info->tx_ctrl; + local_irq_restore(flags); + return 0; +} + +static int +rs_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + local_irq_save(flags); + + if (clear & TIOCM_RTS) + e100_rts(info, 0); + if (clear & TIOCM_DTR) + e100_dtr(info, 0); + /* Handle FEMALE behaviour */ + if (clear & TIOCM_RI) + e100_ri_out(info, 0); + if (clear & TIOCM_CD) + e100_cd_out(info, 0); + + if (set & TIOCM_RTS) + e100_rts(info, 1); + if (set & TIOCM_DTR) + e100_dtr(info, 1); + /* Handle FEMALE behaviour */ + if (set & TIOCM_RI) + e100_ri_out(info, 1); + if (set & TIOCM_CD) + e100_cd_out(info, 1); + + local_irq_restore(flags); + return 0; +} + +static int +rs_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned int result; + unsigned long flags; + + local_irq_save(flags); + + result = + (!E100_RTS_GET(info) ? TIOCM_RTS : 0) + | (!E100_DTR_GET(info) ? TIOCM_DTR : 0) + | (!E100_RI_GET(info) ? TIOCM_RNG : 0) + | (!E100_DSR_GET(info) ? TIOCM_DSR : 0) + | (!E100_CD_GET(info) ? TIOCM_CAR : 0) + | (!E100_CTS_GET(info) ? TIOCM_CTS : 0); + + local_irq_restore(flags); + +#ifdef SERIAL_DEBUG_IO + printk(KERN_DEBUG "ser%i: modem state: %i 0x%08X\n", + info->line, result, result); + { + char s[100]; + + get_control_state_str(result, s); + printk(KERN_DEBUG "state: %s\n", s); + } +#endif + return result; + +} + + +static int +rs_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + struct e100_serial * info = (struct e100_serial *)tty->driver_data; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && + (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TIOCGSERIAL: + return get_serial_info(info, + (struct serial_struct *) arg); + case TIOCSSERIAL: + return set_serial_info(info, + (struct serial_struct *) arg); + case TIOCSERGETLSR: /* Get line status register */ + return get_lsr_info(info, (unsigned int *) arg); + + case TIOCSERGSTRUCT: + if (copy_to_user((struct e100_serial *) arg, + info, sizeof(struct e100_serial))) + return -EFAULT; + return 0; + +#if defined(CONFIG_ETRAX_RS485) + case TIOCSERSETRS485: + { + /* In this ioctl we still use the old structure + * rs485_control for backward compatibility + * (if we use serial_rs485, then old user-level code + * wouldn't work anymore...). + * The use of this ioctl is deprecated: use TIOCSRS485 + * instead.*/ + struct rs485_control rs485ctrl; + struct serial_rs485 rs485data; + printk(KERN_DEBUG "The use of this ioctl is deprecated. Use TIOCSRS485 instead\n"); + if (copy_from_user(&rs485ctrl, (struct rs485_control *)arg, + sizeof(rs485ctrl))) + return -EFAULT; + + rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send; + rs485data.flags = 0; + if (rs485data.delay_rts_before_send != 0) + rs485data.flags |= SER_RS485_RTS_BEFORE_SEND; + else + rs485data.flags &= ~(SER_RS485_RTS_BEFORE_SEND); + + if (rs485ctrl.enabled) + rs485data.flags |= SER_RS485_ENABLED; + else + rs485data.flags &= ~(SER_RS485_ENABLED); + + if (rs485ctrl.rts_on_send) + rs485data.flags |= SER_RS485_RTS_ON_SEND; + else + rs485data.flags &= ~(SER_RS485_RTS_ON_SEND); + + if (rs485ctrl.rts_after_sent) + rs485data.flags |= SER_RS485_RTS_AFTER_SEND; + else + rs485data.flags &= ~(SER_RS485_RTS_AFTER_SEND); + + return e100_enable_rs485(tty, &rs485data); + } + + case TIOCSRS485: + { + /* This is the new version of TIOCSRS485, with new + * data structure serial_rs485 */ + struct serial_rs485 rs485data; + if (copy_from_user(&rs485data, (struct rs485_control *)arg, + sizeof(rs485data))) + return -EFAULT; + + return e100_enable_rs485(tty, &rs485data); + } + + case TIOCGRS485: + { + struct serial_rs485 *rs485data = + &(((struct e100_serial *)tty->driver_data)->rs485); + /* This is the ioctl to get RS485 data from user-space */ + if (copy_to_user((struct serial_rs485 *) arg, + rs485data, + sizeof(struct serial_rs485))) + return -EFAULT; + break; + } + + case TIOCSERWRRS485: + { + struct rs485_write rs485wr; + if (copy_from_user(&rs485wr, (struct rs485_write *)arg, + sizeof(rs485wr))) + return -EFAULT; + + return e100_write_rs485(tty, rs485wr.outc, rs485wr.outc_size); + } +#endif + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void +rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + + change_speed(info); + + /* Handle turning off CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + rs_start(tty); + } + +} + +/* + * ------------------------------------------------------------ + * rs_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * S structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void +rs_close(struct tty_struct *tty, struct file * filp) +{ + struct e100_serial * info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + if (!info) + return; + + /* interrupts are disabled for this entire function */ + + local_irq_save(flags); + + if (tty_hung_up_p(filp)) { + local_irq_restore(flags); + return; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("[%d] rs_close ttyS%d, count = %d\n", current->pid, + info->line, info->count); +#endif + if ((tty->count == 1) && (info->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. Info->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk(KERN_CRIT + "rs_close: bad serial port count; tty->count is 1, " + "info->count is %d\n", info->count); + info->count = 1; + } + if (--info->count < 0) { + printk(KERN_CRIT "rs_close: bad serial port count for ttyS%d: %d\n", + info->line, info->count); + info->count = 0; + } + if (info->count) { + local_irq_restore(flags); + return; + } + info->flags |= ASYNC_CLOSING; + /* + * Save the termios structure, since this port may have + * separate termios for callout and dialin. + */ + if (info->flags & ASYNC_NORMAL_ACTIVE) + info->normal_termios = *tty->termios; + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, info->closing_wait); + /* + * At this point we stop accepting input. To do this, we + * disable the serial receiver and the DMA receive interrupt. + */ +#ifdef SERIAL_HANDLE_EARLY_ERRORS + e100_disable_serial_data_irq(info); +#endif + +#ifndef CONFIG_SVINTO_SIM + e100_disable_rx(info); + e100_disable_rx_irq(info); + + if (info->flags & ASYNC_INITIALIZED) { + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important as we have a transmit FIFO! + */ + rs_wait_until_sent(tty, HZ); + } +#endif + + shutdown(info); + rs_flush_buffer(tty); + tty_ldisc_flush(tty); + tty->closing = 0; + info->event = 0; + info->port.tty = NULL; + if (info->blocked_open) { + if (info->close_delay) + schedule_timeout_interruptible(info->close_delay); + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); + local_irq_restore(flags); + + /* port closed */ + +#if defined(CONFIG_ETRAX_RS485) + if (info->rs485.flags & SER_RS485_ENABLED) { + info->rs485.flags &= ~(SER_RS485_ENABLED); +#if defined(CONFIG_ETRAX_RS485_ON_PA) + *R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit); +#endif +#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + rs485_port_g_bit, 0); +#endif +#if defined(CONFIG_ETRAX_RS485_LTC1387) + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 0); + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 0); +#endif + } +#endif + + /* + * Release any allocated DMA irq's. + */ + if (info->dma_in_enabled) { + free_irq(info->dma_in_irq_nbr, info); + cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); + info->uses_dma_in = 0; +#ifdef SERIAL_DEBUG_OPEN + printk(KERN_DEBUG "DMA irq '%s' freed\n", + info->dma_in_irq_description); +#endif + } + if (info->dma_out_enabled) { + free_irq(info->dma_out_irq_nbr, info); + cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); + info->uses_dma_out = 0; +#ifdef SERIAL_DEBUG_OPEN + printk(KERN_DEBUG "DMA irq '%s' freed\n", + info->dma_out_irq_description); +#endif + } +} + +/* + * rs_wait_until_sent() --- wait until the transmitter is empty + */ +static void rs_wait_until_sent(struct tty_struct *tty, int timeout) +{ + unsigned long orig_jiffies; + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long curr_time = jiffies; + unsigned long curr_time_usec = GET_JIFFIES_USEC(); + long elapsed_usec = + (curr_time - info->last_tx_active) * (1000000/HZ) + + curr_time_usec - info->last_tx_active_usec; + + /* + * Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO + * R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k) + */ + orig_jiffies = jiffies; + while (info->xmit.head != info->xmit.tail || /* More in send queue */ + (*info->ostatusadr & 0x007f) || /* more in FIFO */ + (elapsed_usec < 2*info->char_time_usec)) { + schedule_timeout_interruptible(1); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + curr_time = jiffies; + curr_time_usec = GET_JIFFIES_USEC(); + elapsed_usec = + (curr_time - info->last_tx_active) * (1000000/HZ) + + curr_time_usec - info->last_tx_active_usec; + } + set_current_state(TASK_RUNNING); +} + +/* + * rs_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +void +rs_hangup(struct tty_struct *tty) +{ + struct e100_serial * info = (struct e100_serial *)tty->driver_data; + + rs_flush_buffer(tty); + shutdown(info); + info->event = 0; + info->count = 0; + info->flags &= ~ASYNC_NORMAL_ACTIVE; + info->port.tty = NULL; + wake_up_interruptible(&info->open_wait); +} + +/* + * ------------------------------------------------------------ + * rs_open() and friends + * ------------------------------------------------------------ + */ +static int +block_til_ready(struct tty_struct *tty, struct file * filp, + struct e100_serial *info) +{ + DECLARE_WAITQUEUE(wait, current); + unsigned long flags; + int retval; + int do_clocal = 0, extra_count = 0; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + wait_event_interruptible_tty(info->close_wait, + !(info->flags & ASYNC_CLOSING)); +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; +#else + return -EAGAIN; +#endif + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) { + do_clocal = 1; + } + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready before block: ttyS%d, count = %d\n", + info->line, info->count); +#endif + local_irq_save(flags); + if (!tty_hung_up_p(filp)) { + extra_count++; + info->count--; + } + local_irq_restore(flags); + info->blocked_open++; + while (1) { + local_irq_save(flags); + /* assert RTS and DTR */ + e100_rts(info, 1); + e100_dtr(info, 1); + local_irq_restore(flags); + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || + !(info->flags & ASYNC_INITIALIZED)) { +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; +#else + retval = -EAGAIN; +#endif + break; + } + if (!(info->flags & ASYNC_CLOSING) && do_clocal) + /* && (do_clocal || DCD_IS_ASSERTED) */ + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready blocking: ttyS%d, count = %d\n", + info->line, info->count); +#endif + tty_unlock(); + schedule(); + tty_lock(); + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&info->open_wait, &wait); + if (extra_count) + info->count++; + info->blocked_open--; +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready after blocking: ttyS%d, count = %d\n", + info->line, info->count); +#endif + if (retval) + return retval; + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; +} + +static void +deinit_port(struct e100_serial *info) +{ + if (info->dma_out_enabled) { + cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); + free_irq(info->dma_out_irq_nbr, info); + } + if (info->dma_in_enabled) { + cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); + free_irq(info->dma_in_irq_nbr, info); + } +} + +/* + * This routine is called whenever a serial port is opened. + * It performs the serial-specific initialization for the tty structure. + */ +static int +rs_open(struct tty_struct *tty, struct file * filp) +{ + struct e100_serial *info; + int retval, line; + unsigned long page; + int allocated_resources = 0; + + /* find which port we want to open */ + line = tty->index; + + if (line < 0 || line >= NR_PORTS) + return -ENODEV; + + /* find the corresponding e100_serial struct in the table */ + info = rs_table + line; + + /* don't allow the opening of ports that are not enabled in the HW config */ + if (!info->enabled) + return -ENODEV; + +#ifdef SERIAL_DEBUG_OPEN + printk("[%d] rs_open %s, count = %d\n", current->pid, tty->name, + info->count); +#endif + + info->count++; + tty->driver_data = info; + info->port.tty = tty; + + info->port.tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + if (!tmp_buf) { + page = get_zeroed_page(GFP_KERNEL); + if (!page) { + return -ENOMEM; + } + if (tmp_buf) + free_page(page); + else + tmp_buf = (unsigned char *) page; + } + + /* + * If the port is in the middle of closing, bail out now + */ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + wait_event_interruptible_tty(info->close_wait, + !(info->flags & ASYNC_CLOSING)); +#ifdef SERIAL_DO_RESTART + return ((info->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS); +#else + return -EAGAIN; +#endif + } + + /* + * If DMA is enabled try to allocate the irq's. + */ + if (info->count == 1) { + allocated_resources = 1; + if (info->dma_in_enabled) { + if (request_irq(info->dma_in_irq_nbr, + rec_interrupt, + info->dma_in_irq_flags, + info->dma_in_irq_description, + info)) { + printk(KERN_WARNING "DMA irq '%s' busy; " + "falling back to non-DMA mode\n", + info->dma_in_irq_description); + /* Make sure we never try to use DMA in */ + /* for the port again. */ + info->dma_in_enabled = 0; + } else if (cris_request_dma(info->dma_in_nbr, + info->dma_in_irq_description, + DMA_VERBOSE_ON_ERROR, + info->dma_owner)) { + free_irq(info->dma_in_irq_nbr, info); + printk(KERN_WARNING "DMA '%s' busy; " + "falling back to non-DMA mode\n", + info->dma_in_irq_description); + /* Make sure we never try to use DMA in */ + /* for the port again. */ + info->dma_in_enabled = 0; + } +#ifdef SERIAL_DEBUG_OPEN + else + printk(KERN_DEBUG "DMA irq '%s' allocated\n", + info->dma_in_irq_description); +#endif + } + if (info->dma_out_enabled) { + if (request_irq(info->dma_out_irq_nbr, + tr_interrupt, + info->dma_out_irq_flags, + info->dma_out_irq_description, + info)) { + printk(KERN_WARNING "DMA irq '%s' busy; " + "falling back to non-DMA mode\n", + info->dma_out_irq_description); + /* Make sure we never try to use DMA out */ + /* for the port again. */ + info->dma_out_enabled = 0; + } else if (cris_request_dma(info->dma_out_nbr, + info->dma_out_irq_description, + DMA_VERBOSE_ON_ERROR, + info->dma_owner)) { + free_irq(info->dma_out_irq_nbr, info); + printk(KERN_WARNING "DMA '%s' busy; " + "falling back to non-DMA mode\n", + info->dma_out_irq_description); + /* Make sure we never try to use DMA out */ + /* for the port again. */ + info->dma_out_enabled = 0; + } +#ifdef SERIAL_DEBUG_OPEN + else + printk(KERN_DEBUG "DMA irq '%s' allocated\n", + info->dma_out_irq_description); +#endif + } + } + + /* + * Start up the serial port + */ + + retval = startup(info); + if (retval) { + if (allocated_resources) + deinit_port(info); + + /* FIXME Decrease count info->count here too? */ + return retval; + } + + + retval = block_til_ready(tty, filp, info); + if (retval) { +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open returning after block_til_ready with %d\n", + retval); +#endif + if (allocated_resources) + deinit_port(info); + + return retval; + } + + if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) { + *tty->termios = info->normal_termios; + change_speed(info); + } + +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open ttyS%d successful...\n", info->line); +#endif + DLOG_INT_TRIG( log_int_pos = 0); + + DFLIP( if (info->line == SERIAL_DEBUG_LINE) { + info->icount.rx = 0; + } ); + + return 0; +} + +#ifdef CONFIG_PROC_FS +/* + * /proc fs routines.... + */ + +static void seq_line_info(struct seq_file *m, struct e100_serial *info) +{ + unsigned long tmp; + + seq_printf(m, "%d: uart:E100 port:%lX irq:%d", + info->line, (unsigned long)info->ioport, info->irq); + + if (!info->ioport || (info->type == PORT_UNKNOWN)) { + seq_printf(m, "\n"); + return; + } + + seq_printf(m, " baud:%d", info->baud); + seq_printf(m, " tx:%lu rx:%lu", + (unsigned long)info->icount.tx, + (unsigned long)info->icount.rx); + tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); + if (tmp) + seq_printf(m, " tx_pend:%lu/%lu", + (unsigned long)tmp, + (unsigned long)SERIAL_XMIT_SIZE); + + seq_printf(m, " rx_pend:%lu/%lu", + (unsigned long)info->recv_cnt, + (unsigned long)info->max_recv_cnt); + +#if 1 + if (info->port.tty) { + if (info->port.tty->stopped) + seq_printf(m, " stopped:%i", + (int)info->port.tty->stopped); + if (info->port.tty->hw_stopped) + seq_printf(m, " hw_stopped:%i", + (int)info->port.tty->hw_stopped); + } + + { + unsigned char rstat = info->ioport[REG_STATUS]; + if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect)) + seq_printf(m, " xoff_detect:1"); + } + +#endif + + if (info->icount.frame) + seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame); + + if (info->icount.parity) + seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity); + + if (info->icount.brk) + seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk); + + if (info->icount.overrun) + seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun); + + /* + * Last thing is the RS-232 status lines + */ + if (!E100_RTS_GET(info)) + seq_puts(m, "|RTS"); + if (!E100_CTS_GET(info)) + seq_puts(m, "|CTS"); + if (!E100_DTR_GET(info)) + seq_puts(m, "|DTR"); + if (!E100_DSR_GET(info)) + seq_puts(m, "|DSR"); + if (!E100_CD_GET(info)) + seq_puts(m, "|CD"); + if (!E100_RI_GET(info)) + seq_puts(m, "|RI"); + seq_puts(m, "\n"); +} + + +static int crisv10_proc_show(struct seq_file *m, void *v) +{ + int i; + + seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); + + for (i = 0; i < NR_PORTS; i++) { + if (!rs_table[i].enabled) + continue; + seq_line_info(m, &rs_table[i]); + } +#ifdef DEBUG_LOG_INCLUDED + for (i = 0; i < debug_log_pos; i++) { + seq_printf(m, "%-4i %lu.%lu ", + i, debug_log[i].time, + timer_data_to_ns(debug_log[i].timer_data)); + seq_printf(m, debug_log[i].string, debug_log[i].value); + } + seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE); + debug_log_pos = 0; +#endif + return 0; +} + +static int crisv10_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, crisv10_proc_show, NULL); +} + +static const struct file_operations crisv10_proc_fops = { + .owner = THIS_MODULE, + .open = crisv10_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + + +/* Finally, routines used to initialize the serial driver. */ + +static void show_serial_version(void) +{ + printk(KERN_INFO + "ETRAX 100LX serial-driver %s, " + "(c) 2000-2004 Axis Communications AB\r\n", + &serial_version[11]); /* "$Revision: x.yy" */ +} + +/* rs_init inits the driver at boot (using the module_init chain) */ + +static const struct tty_operations rs_ops = { + .open = rs_open, + .close = rs_close, + .write = rs_write, + .flush_chars = rs_flush_chars, + .write_room = rs_write_room, + .chars_in_buffer = rs_chars_in_buffer, + .flush_buffer = rs_flush_buffer, + .ioctl = rs_ioctl, + .throttle = rs_throttle, + .unthrottle = rs_unthrottle, + .set_termios = rs_set_termios, + .stop = rs_stop, + .start = rs_start, + .hangup = rs_hangup, + .break_ctl = rs_break, + .send_xchar = rs_send_xchar, + .wait_until_sent = rs_wait_until_sent, + .tiocmget = rs_tiocmget, + .tiocmset = rs_tiocmset, +#ifdef CONFIG_PROC_FS + .proc_fops = &crisv10_proc_fops, +#endif +}; + +static int __init rs_init(void) +{ + int i; + struct e100_serial *info; + struct tty_driver *driver = alloc_tty_driver(NR_PORTS); + + if (!driver) + return -ENOMEM; + + show_serial_version(); + + /* Setup the timed flush handler system */ + +#if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER) + setup_timer(&flush_timer, timed_flush_handler, 0); + mod_timer(&flush_timer, jiffies + 5); +#endif + +#if defined(CONFIG_ETRAX_RS485) +#if defined(CONFIG_ETRAX_RS485_ON_PA) + if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit, + rs485_pa_bit)) { + printk(KERN_CRIT "ETRAX100LX serial: Could not allocate " + "RS485 pin\n"); + put_tty_driver(driver); + return -EBUSY; + } +#endif +#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) + if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit, + rs485_port_g_bit)) { + printk(KERN_CRIT "ETRAX100LX serial: Could not allocate " + "RS485 pin\n"); + put_tty_driver(driver); + return -EBUSY; + } +#endif +#endif + + /* Initialize the tty_driver structure */ + + driver->driver_name = "serial"; + driver->name = "ttyS"; + driver->major = TTY_MAJOR; + driver->minor_start = 64; + driver->type = TTY_DRIVER_TYPE_SERIAL; + driver->subtype = SERIAL_TYPE_NORMAL; + driver->init_termios = tty_std_termios; + driver->init_termios.c_cflag = + B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */ + driver->init_termios.c_ispeed = 115200; + driver->init_termios.c_ospeed = 115200; + driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + + tty_set_operations(driver, &rs_ops); + serial_driver = driver; + if (tty_register_driver(driver)) + panic("Couldn't register serial driver\n"); + /* do some initializing for the separate ports */ + + for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) { + if (info->enabled) { + if (cris_request_io_interface(info->io_if, + info->io_if_description)) { + printk(KERN_CRIT "ETRAX100LX async serial: " + "Could not allocate IO pins for " + "%s, port %d\n", + info->io_if_description, i); + info->enabled = 0; + } + } + info->uses_dma_in = 0; + info->uses_dma_out = 0; + info->line = i; + info->port.tty = NULL; + info->type = PORT_ETRAX; + info->tr_running = 0; + info->forced_eop = 0; + info->baud_base = DEF_BAUD_BASE; + info->custom_divisor = 0; + info->flags = 0; + info->close_delay = 5*HZ/10; + info->closing_wait = 30*HZ; + info->x_char = 0; + info->event = 0; + info->count = 0; + info->blocked_open = 0; + info->normal_termios = driver->init_termios; + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + info->xmit.buf = NULL; + info->xmit.tail = info->xmit.head = 0; + info->first_recv_buffer = info->last_recv_buffer = NULL; + info->recv_cnt = info->max_recv_cnt = 0; + info->last_tx_active_usec = 0; + info->last_tx_active = 0; + +#if defined(CONFIG_ETRAX_RS485) + /* Set sane defaults */ + info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND); + info->rs485.flags |= SER_RS485_RTS_AFTER_SEND; + info->rs485.flags &= ~(SER_RS485_RTS_BEFORE_SEND); + info->rs485.delay_rts_before_send = 0; + info->rs485.flags &= ~(SER_RS485_ENABLED); +#endif + INIT_WORK(&info->work, do_softint); + + if (info->enabled) { + printk(KERN_INFO "%s%d at %p is a builtin UART with DMA\n", + serial_driver->name, info->line, info->ioport); + } + } +#ifdef CONFIG_ETRAX_FAST_TIMER +#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER + memset(fast_timers, 0, sizeof(fast_timers)); +#endif +#ifdef CONFIG_ETRAX_RS485 + memset(fast_timers_rs485, 0, sizeof(fast_timers_rs485)); +#endif + fast_timer_init(); +#endif + +#ifndef CONFIG_SVINTO_SIM +#ifndef CONFIG_ETRAX_KGDB + /* Not needed in simulator. May only complicate stuff. */ + /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */ + + if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, + IRQF_SHARED | IRQF_DISABLED, "serial ", driver)) + panic("%s: Failed to request irq8", __func__); + +#endif +#endif /* CONFIG_SVINTO_SIM */ + + return 0; +} + +/* this makes sure that rs_init is called during kernel boot */ + +module_init(rs_init); diff --git a/drivers/tty/serial/crisv10.h b/drivers/tty/serial/crisv10.h new file mode 100644 index 000000000000..ea0beb46a10d --- /dev/null +++ b/drivers/tty/serial/crisv10.h @@ -0,0 +1,147 @@ +/* + * serial.h: Arch-dep definitions for the Etrax100 serial driver. + * + * Copyright (C) 1998-2007 Axis Communications AB + */ + +#ifndef _ETRAX_SERIAL_H +#define _ETRAX_SERIAL_H + +#include +#include +#include +#include + +/* Software state per channel */ + +#ifdef __KERNEL__ +/* + * This is our internal structure for each serial port's state. + * + * Many fields are paralleled by the structure used by the serial_struct + * structure. + * + * For definitions of the flags field, see tty.h + */ + +#define SERIAL_RECV_DESCRIPTORS 8 + +struct etrax_recv_buffer { + struct etrax_recv_buffer *next; + unsigned short length; + unsigned char error; + unsigned char pad; + + unsigned char buffer[0]; +}; + +struct e100_serial { + struct tty_port port; + int baud; + volatile u8 *ioport; /* R_SERIALx_CTRL */ + u32 irq; /* bitnr in R_IRQ_MASK2 for dmaX_descr */ + + /* Output registers */ + volatile u8 *oclrintradr; /* adr to R_DMA_CHx_CLR_INTR */ + volatile u32 *ofirstadr; /* adr to R_DMA_CHx_FIRST */ + volatile u8 *ocmdadr; /* adr to R_DMA_CHx_CMD */ + const volatile u8 *ostatusadr; /* adr to R_DMA_CHx_STATUS */ + + /* Input registers */ + volatile u8 *iclrintradr; /* adr to R_DMA_CHx_CLR_INTR */ + volatile u32 *ifirstadr; /* adr to R_DMA_CHx_FIRST */ + volatile u8 *icmdadr; /* adr to R_DMA_CHx_CMD */ + volatile u32 *idescradr; /* adr to R_DMA_CHx_DESCR */ + + int flags; /* defined in tty.h */ + + u8 rx_ctrl; /* shadow for R_SERIALx_REC_CTRL */ + u8 tx_ctrl; /* shadow for R_SERIALx_TR_CTRL */ + u8 iseteop; /* bit number for R_SET_EOP for the input dma */ + int enabled; /* Set to 1 if the port is enabled in HW config */ + + u8 dma_out_enabled; /* Set to 1 if DMA should be used */ + u8 dma_in_enabled; /* Set to 1 if DMA should be used */ + + /* end of fields defined in rs_table[] in .c-file */ + int dma_owner; + unsigned int dma_in_nbr; + unsigned int dma_out_nbr; + unsigned int dma_in_irq_nbr; + unsigned int dma_out_irq_nbr; + unsigned long dma_in_irq_flags; + unsigned long dma_out_irq_flags; + char *dma_in_irq_description; + char *dma_out_irq_description; + + enum cris_io_interface io_if; + char *io_if_description; + + u8 uses_dma_in; /* Set to 1 if DMA is used */ + u8 uses_dma_out; /* Set to 1 if DMA is used */ + u8 forced_eop; /* a fifo eop has been forced */ + int baud_base; /* For special baudrates */ + int custom_divisor; /* For special baudrates */ + struct etrax_dma_descr tr_descr; + struct etrax_dma_descr rec_descr[SERIAL_RECV_DESCRIPTORS]; + int cur_rec_descr; + + volatile int tr_running; /* 1 if output is running */ + + struct tty_struct *tty; + int read_status_mask; + int ignore_status_mask; + int x_char; /* xon/xoff character */ + int close_delay; + unsigned short closing_wait; + unsigned short closing_wait2; + unsigned long event; + unsigned long last_active; + int line; + int type; /* PORT_ETRAX */ + int count; /* # of fd on device */ + int blocked_open; /* # of blocked opens */ + struct circ_buf xmit; + struct etrax_recv_buffer *first_recv_buffer; + struct etrax_recv_buffer *last_recv_buffer; + unsigned int recv_cnt; + unsigned int max_recv_cnt; + + struct work_struct work; + struct async_icount icount; /* error-statistics etc.*/ + struct ktermios normal_termios; + struct ktermios callout_termios; + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; + + unsigned long char_time_usec; /* The time for 1 char, in usecs */ + unsigned long flush_time_usec; /* How often we should flush */ + unsigned long last_tx_active_usec; /* Last tx usec in the jiffies */ + unsigned long last_tx_active; /* Last tx time in jiffies */ + unsigned long last_rx_active_usec; /* Last rx usec in the jiffies */ + unsigned long last_rx_active; /* Last rx time in jiffies */ + + int break_detected_cnt; + int errorcode; + +#ifdef CONFIG_ETRAX_RS485 + struct serial_rs485 rs485; /* RS-485 support */ +#endif +}; + +/* this PORT is not in the standard serial.h. it's not actually used for + * anything since we only have one type of async serial-port anyway in this + * system. + */ + +#define PORT_ETRAX 1 + +/* + * Events are used to schedule things to happen at timer-interrupt + * time, instead of at rs interrupt time. + */ +#define RS_EVENT_WRITE_WAKEUP 0 + +#endif /* __KERNEL__ */ + +#endif /* !_ETRAX_SERIAL_H */ diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c new file mode 100644 index 000000000000..57421d776329 --- /dev/null +++ b/drivers/tty/serial/dz.c @@ -0,0 +1,955 @@ +/* + * dz.c: Serial port driver for DECstations equipped + * with the DZ chipset. + * + * Copyright (C) 1998 Olivier A. D. Lebaillif + * + * Email: olivier.lebaillif@ifrsys.com + * + * Copyright (C) 2004, 2006, 2007 Maciej W. Rozycki + * + * [31-AUG-98] triemer + * Changed IRQ to use Harald's dec internals interrupts.h + * removed base_addr code - moving address assignment to setup.c + * Changed name of dz_init to rs_init to be consistent with tc code + * [13-NOV-98] triemer fixed code to receive characters + * after patches by harald to irq code. + * [09-JAN-99] triemer minor fix for schedule - due to removal of timeout + * field from "current" - somewhere between 2.1.121 and 2.1.131 + Qua Jun 27 15:02:26 BRT 2001 + * [27-JUN-2001] Arnaldo Carvalho de Melo - cleanups + * + * Parts (C) 1999 David Airlie, airlied@linux.ie + * [07-SEP-99] Bugfixes + * + * [06-Jan-2002] Russell King + * Converted to new serial core + */ + +#undef DEBUG_DZ + +#if defined(CONFIG_SERIAL_DZ_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "dz.h" + + +MODULE_DESCRIPTION("DECstation DZ serial driver"); +MODULE_LICENSE("GPL"); + + +static char dz_name[] __initdata = "DECstation DZ serial driver version "; +static char dz_version[] __initdata = "1.04"; + +struct dz_port { + struct dz_mux *mux; + struct uart_port port; + unsigned int cflag; +}; + +struct dz_mux { + struct dz_port dport[DZ_NB_PORT]; + atomic_t map_guard; + atomic_t irq_guard; + int initialised; +}; + +static struct dz_mux dz_mux; + +static inline struct dz_port *to_dport(struct uart_port *uport) +{ + return container_of(uport, struct dz_port, port); +} + +/* + * ------------------------------------------------------------ + * dz_in () and dz_out () + * + * These routines are used to access the registers of the DZ + * chip, hiding relocation differences between implementation. + * ------------------------------------------------------------ + */ + +static u16 dz_in(struct dz_port *dport, unsigned offset) +{ + void __iomem *addr = dport->port.membase + offset; + + return readw(addr); +} + +static void dz_out(struct dz_port *dport, unsigned offset, u16 value) +{ + void __iomem *addr = dport->port.membase + offset; + + writew(value, addr); +} + +/* + * ------------------------------------------------------------ + * rs_stop () and rs_start () + * + * These routines are called before setting or resetting + * tty->stopped. They enable or disable transmitter interrupts, + * as necessary. + * ------------------------------------------------------------ + */ + +static void dz_stop_tx(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + u16 tmp, mask = 1 << dport->port.line; + + tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ + tmp &= ~mask; /* clear the TX flag */ + dz_out(dport, DZ_TCR, tmp); +} + +static void dz_start_tx(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + u16 tmp, mask = 1 << dport->port.line; + + tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ + tmp |= mask; /* set the TX flag */ + dz_out(dport, DZ_TCR, tmp); +} + +static void dz_stop_rx(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + + dport->cflag &= ~DZ_RXENAB; + dz_out(dport, DZ_LPR, dport->cflag); +} + +static void dz_enable_ms(struct uart_port *uport) +{ + /* nothing to do */ +} + +/* + * ------------------------------------------------------------ + * + * Here start the interrupt handling routines. All of the following + * subroutines are declared as inline and are folded into + * dz_interrupt. They were separated out for readability's sake. + * + * Note: dz_interrupt() is a "fast" interrupt, which means that it + * runs with interrupts turned off. People who may want to modify + * dz_interrupt() should try to keep the interrupt handler as fast as + * possible. After you are done making modifications, it is not a bad + * idea to do: + * + * make drivers/serial/dz.s + * + * and look at the resulting assemble code in dz.s. + * + * ------------------------------------------------------------ + */ + +/* + * ------------------------------------------------------------ + * receive_char () + * + * This routine deals with inputs from any lines. + * ------------------------------------------------------------ + */ +static inline void dz_receive_chars(struct dz_mux *mux) +{ + struct uart_port *uport; + struct dz_port *dport = &mux->dport[0]; + struct tty_struct *tty = NULL; + struct uart_icount *icount; + int lines_rx[DZ_NB_PORT] = { [0 ... DZ_NB_PORT - 1] = 0 }; + unsigned char ch, flag; + u16 status; + int i; + + while ((status = dz_in(dport, DZ_RBUF)) & DZ_DVAL) { + dport = &mux->dport[LINE(status)]; + uport = &dport->port; + tty = uport->state->port.tty; /* point to the proper dev */ + + ch = UCHAR(status); /* grab the char */ + flag = TTY_NORMAL; + + icount = &uport->icount; + icount->rx++; + + if (unlikely(status & (DZ_OERR | DZ_FERR | DZ_PERR))) { + + /* + * There is no separate BREAK status bit, so treat + * null characters with framing errors as BREAKs; + * normally, otherwise. For this move the Framing + * Error bit to a simulated BREAK bit. + */ + if (!ch) { + status |= (status & DZ_FERR) >> + (ffs(DZ_FERR) - ffs(DZ_BREAK)); + status &= ~DZ_FERR; + } + + /* Handle SysRq/SAK & keep track of the statistics. */ + if (status & DZ_BREAK) { + icount->brk++; + if (uart_handle_break(uport)) + continue; + } else if (status & DZ_FERR) + icount->frame++; + else if (status & DZ_PERR) + icount->parity++; + if (status & DZ_OERR) + icount->overrun++; + + status &= uport->read_status_mask; + if (status & DZ_BREAK) + flag = TTY_BREAK; + else if (status & DZ_FERR) + flag = TTY_FRAME; + else if (status & DZ_PERR) + flag = TTY_PARITY; + + } + + if (uart_handle_sysrq_char(uport, ch)) + continue; + + uart_insert_char(uport, status, DZ_OERR, ch, flag); + lines_rx[LINE(status)] = 1; + } + for (i = 0; i < DZ_NB_PORT; i++) + if (lines_rx[i]) + tty_flip_buffer_push(mux->dport[i].port.state->port.tty); +} + +/* + * ------------------------------------------------------------ + * transmit_char () + * + * This routine deals with outputs to any lines. + * ------------------------------------------------------------ + */ +static inline void dz_transmit_chars(struct dz_mux *mux) +{ + struct dz_port *dport = &mux->dport[0]; + struct circ_buf *xmit; + unsigned char tmp; + u16 status; + + status = dz_in(dport, DZ_CSR); + dport = &mux->dport[LINE(status)]; + xmit = &dport->port.state->xmit; + + if (dport->port.x_char) { /* XON/XOFF chars */ + dz_out(dport, DZ_TDR, dport->port.x_char); + dport->port.icount.tx++; + dport->port.x_char = 0; + return; + } + /* If nothing to do or stopped or hardware stopped. */ + if (uart_circ_empty(xmit) || uart_tx_stopped(&dport->port)) { + spin_lock(&dport->port.lock); + dz_stop_tx(&dport->port); + spin_unlock(&dport->port.lock); + return; + } + + /* + * If something to do... (remember the dz has no output fifo, + * so we go one char at a time) :-< + */ + tmp = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (DZ_XMIT_SIZE - 1); + dz_out(dport, DZ_TDR, tmp); + dport->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < DZ_WAKEUP_CHARS) + uart_write_wakeup(&dport->port); + + /* Are we are done. */ + if (uart_circ_empty(xmit)) { + spin_lock(&dport->port.lock); + dz_stop_tx(&dport->port); + spin_unlock(&dport->port.lock); + } +} + +/* + * ------------------------------------------------------------ + * check_modem_status() + * + * DS 3100 & 5100: Only valid for the MODEM line, duh! + * DS 5000/200: Valid for the MODEM and PRINTER line. + * ------------------------------------------------------------ + */ +static inline void check_modem_status(struct dz_port *dport) +{ + /* + * FIXME: + * 1. No status change interrupt; use a timer. + * 2. Handle the 3100/5000 as appropriate. --macro + */ + u16 status; + + /* If not the modem line just return. */ + if (dport->port.line != DZ_MODEM) + return; + + status = dz_in(dport, DZ_MSR); + + /* it's easy, since DSR2 is the only bit in the register */ + if (status) + dport->port.icount.dsr++; +} + +/* + * ------------------------------------------------------------ + * dz_interrupt () + * + * this is the main interrupt routine for the DZ chip. + * It deals with the multiple ports. + * ------------------------------------------------------------ + */ +static irqreturn_t dz_interrupt(int irq, void *dev_id) +{ + struct dz_mux *mux = dev_id; + struct dz_port *dport = &mux->dport[0]; + u16 status; + + /* get the reason why we just got an irq */ + status = dz_in(dport, DZ_CSR); + + if ((status & (DZ_RDONE | DZ_RIE)) == (DZ_RDONE | DZ_RIE)) + dz_receive_chars(mux); + + if ((status & (DZ_TRDY | DZ_TIE)) == (DZ_TRDY | DZ_TIE)) + dz_transmit_chars(mux); + + return IRQ_HANDLED; +} + +/* + * ------------------------------------------------------------------- + * Here ends the DZ interrupt routines. + * ------------------------------------------------------------------- + */ + +static unsigned int dz_get_mctrl(struct uart_port *uport) +{ + /* + * FIXME: Handle the 3100/5000 as appropriate. --macro + */ + struct dz_port *dport = to_dport(uport); + unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; + + if (dport->port.line == DZ_MODEM) { + if (dz_in(dport, DZ_MSR) & DZ_MODEM_DSR) + mctrl &= ~TIOCM_DSR; + } + + return mctrl; +} + +static void dz_set_mctrl(struct uart_port *uport, unsigned int mctrl) +{ + /* + * FIXME: Handle the 3100/5000 as appropriate. --macro + */ + struct dz_port *dport = to_dport(uport); + u16 tmp; + + if (dport->port.line == DZ_MODEM) { + tmp = dz_in(dport, DZ_TCR); + if (mctrl & TIOCM_DTR) + tmp &= ~DZ_MODEM_DTR; + else + tmp |= DZ_MODEM_DTR; + dz_out(dport, DZ_TCR, tmp); + } +} + +/* + * ------------------------------------------------------------------- + * startup () + * + * various initialization tasks + * ------------------------------------------------------------------- + */ +static int dz_startup(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + struct dz_mux *mux = dport->mux; + unsigned long flags; + int irq_guard; + int ret; + u16 tmp; + + irq_guard = atomic_add_return(1, &mux->irq_guard); + if (irq_guard != 1) + return 0; + + ret = request_irq(dport->port.irq, dz_interrupt, + IRQF_SHARED, "dz", mux); + if (ret) { + atomic_add(-1, &mux->irq_guard); + printk(KERN_ERR "dz: Cannot get IRQ %d!\n", dport->port.irq); + return ret; + } + + spin_lock_irqsave(&dport->port.lock, flags); + + /* Enable interrupts. */ + tmp = dz_in(dport, DZ_CSR); + tmp |= DZ_RIE | DZ_TIE; + dz_out(dport, DZ_CSR, tmp); + + spin_unlock_irqrestore(&dport->port.lock, flags); + + return 0; +} + +/* + * ------------------------------------------------------------------- + * shutdown () + * + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + * ------------------------------------------------------------------- + */ +static void dz_shutdown(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + struct dz_mux *mux = dport->mux; + unsigned long flags; + int irq_guard; + u16 tmp; + + spin_lock_irqsave(&dport->port.lock, flags); + dz_stop_tx(&dport->port); + spin_unlock_irqrestore(&dport->port.lock, flags); + + irq_guard = atomic_add_return(-1, &mux->irq_guard); + if (!irq_guard) { + /* Disable interrupts. */ + tmp = dz_in(dport, DZ_CSR); + tmp &= ~(DZ_RIE | DZ_TIE); + dz_out(dport, DZ_CSR, tmp); + + free_irq(dport->port.irq, mux); + } +} + +/* + * ------------------------------------------------------------------- + * dz_tx_empty() -- get the transmitter empty status + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + * ------------------------------------------------------------------- + */ +static unsigned int dz_tx_empty(struct uart_port *uport) +{ + struct dz_port *dport = to_dport(uport); + unsigned short tmp, mask = 1 << dport->port.line; + + tmp = dz_in(dport, DZ_TCR); + tmp &= mask; + + return tmp ? 0 : TIOCSER_TEMT; +} + +static void dz_break_ctl(struct uart_port *uport, int break_state) +{ + /* + * FIXME: Can't access BREAK bits in TDR easily; + * reuse the code for polled TX. --macro + */ + struct dz_port *dport = to_dport(uport); + unsigned long flags; + unsigned short tmp, mask = 1 << dport->port.line; + + spin_lock_irqsave(&uport->lock, flags); + tmp = dz_in(dport, DZ_TCR); + if (break_state) + tmp |= mask; + else + tmp &= ~mask; + dz_out(dport, DZ_TCR, tmp); + spin_unlock_irqrestore(&uport->lock, flags); +} + +static int dz_encode_baud_rate(unsigned int baud) +{ + switch (baud) { + case 50: + return DZ_B50; + case 75: + return DZ_B75; + case 110: + return DZ_B110; + case 134: + return DZ_B134; + case 150: + return DZ_B150; + case 300: + return DZ_B300; + case 600: + return DZ_B600; + case 1200: + return DZ_B1200; + case 1800: + return DZ_B1800; + case 2000: + return DZ_B2000; + case 2400: + return DZ_B2400; + case 3600: + return DZ_B3600; + case 4800: + return DZ_B4800; + case 7200: + return DZ_B7200; + case 9600: + return DZ_B9600; + default: + return -1; + } +} + + +static void dz_reset(struct dz_port *dport) +{ + struct dz_mux *mux = dport->mux; + + if (mux->initialised) + return; + + dz_out(dport, DZ_CSR, DZ_CLR); + while (dz_in(dport, DZ_CSR) & DZ_CLR); + iob(); + + /* Enable scanning. */ + dz_out(dport, DZ_CSR, DZ_MSE); + + mux->initialised = 1; +} + +static void dz_set_termios(struct uart_port *uport, struct ktermios *termios, + struct ktermios *old_termios) +{ + struct dz_port *dport = to_dport(uport); + unsigned long flags; + unsigned int cflag, baud; + int bflag; + + cflag = dport->port.line; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cflag |= DZ_CS5; + break; + case CS6: + cflag |= DZ_CS6; + break; + case CS7: + cflag |= DZ_CS7; + break; + case CS8: + default: + cflag |= DZ_CS8; + } + + if (termios->c_cflag & CSTOPB) + cflag |= DZ_CSTOPB; + if (termios->c_cflag & PARENB) + cflag |= DZ_PARENB; + if (termios->c_cflag & PARODD) + cflag |= DZ_PARODD; + + baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600); + bflag = dz_encode_baud_rate(baud); + if (bflag < 0) { /* Try to keep unchanged. */ + baud = uart_get_baud_rate(uport, old_termios, NULL, 50, 9600); + bflag = dz_encode_baud_rate(baud); + if (bflag < 0) { /* Resort to 9600. */ + baud = 9600; + bflag = DZ_B9600; + } + tty_termios_encode_baud_rate(termios, baud, baud); + } + cflag |= bflag; + + if (termios->c_cflag & CREAD) + cflag |= DZ_RXENAB; + + spin_lock_irqsave(&dport->port.lock, flags); + + uart_update_timeout(uport, termios->c_cflag, baud); + + dz_out(dport, DZ_LPR, cflag); + dport->cflag = cflag; + + /* setup accept flag */ + dport->port.read_status_mask = DZ_OERR; + if (termios->c_iflag & INPCK) + dport->port.read_status_mask |= DZ_FERR | DZ_PERR; + if (termios->c_iflag & (BRKINT | PARMRK)) + dport->port.read_status_mask |= DZ_BREAK; + + /* characters to ignore */ + uport->ignore_status_mask = 0; + if ((termios->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK)) + dport->port.ignore_status_mask |= DZ_OERR; + if (termios->c_iflag & IGNPAR) + dport->port.ignore_status_mask |= DZ_FERR | DZ_PERR; + if (termios->c_iflag & IGNBRK) + dport->port.ignore_status_mask |= DZ_BREAK; + + spin_unlock_irqrestore(&dport->port.lock, flags); +} + +/* + * Hack alert! + * Required solely so that the initial PROM-based console + * works undisturbed in parallel with this one. + */ +static void dz_pm(struct uart_port *uport, unsigned int state, + unsigned int oldstate) +{ + struct dz_port *dport = to_dport(uport); + unsigned long flags; + + spin_lock_irqsave(&dport->port.lock, flags); + if (state < 3) + dz_start_tx(&dport->port); + else + dz_stop_tx(&dport->port); + spin_unlock_irqrestore(&dport->port.lock, flags); +} + + +static const char *dz_type(struct uart_port *uport) +{ + return "DZ"; +} + +static void dz_release_port(struct uart_port *uport) +{ + struct dz_mux *mux = to_dport(uport)->mux; + int map_guard; + + iounmap(uport->membase); + uport->membase = NULL; + + map_guard = atomic_add_return(-1, &mux->map_guard); + if (!map_guard) + release_mem_region(uport->mapbase, dec_kn_slot_size); +} + +static int dz_map_port(struct uart_port *uport) +{ + if (!uport->membase) + uport->membase = ioremap_nocache(uport->mapbase, + dec_kn_slot_size); + if (!uport->membase) { + printk(KERN_ERR "dz: Cannot map MMIO\n"); + return -ENOMEM; + } + return 0; +} + +static int dz_request_port(struct uart_port *uport) +{ + struct dz_mux *mux = to_dport(uport)->mux; + int map_guard; + int ret; + + map_guard = atomic_add_return(1, &mux->map_guard); + if (map_guard == 1) { + if (!request_mem_region(uport->mapbase, dec_kn_slot_size, + "dz")) { + atomic_add(-1, &mux->map_guard); + printk(KERN_ERR + "dz: Unable to reserve MMIO resource\n"); + return -EBUSY; + } + } + ret = dz_map_port(uport); + if (ret) { + map_guard = atomic_add_return(-1, &mux->map_guard); + if (!map_guard) + release_mem_region(uport->mapbase, dec_kn_slot_size); + return ret; + } + return 0; +} + +static void dz_config_port(struct uart_port *uport, int flags) +{ + struct dz_port *dport = to_dport(uport); + + if (flags & UART_CONFIG_TYPE) { + if (dz_request_port(uport)) + return; + + uport->type = PORT_DZ; + + dz_reset(dport); + } +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + */ +static int dz_verify_port(struct uart_port *uport, struct serial_struct *ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_DZ) + ret = -EINVAL; + if (ser->irq != uport->irq) + ret = -EINVAL; + return ret; +} + +static struct uart_ops dz_ops = { + .tx_empty = dz_tx_empty, + .get_mctrl = dz_get_mctrl, + .set_mctrl = dz_set_mctrl, + .stop_tx = dz_stop_tx, + .start_tx = dz_start_tx, + .stop_rx = dz_stop_rx, + .enable_ms = dz_enable_ms, + .break_ctl = dz_break_ctl, + .startup = dz_startup, + .shutdown = dz_shutdown, + .set_termios = dz_set_termios, + .pm = dz_pm, + .type = dz_type, + .release_port = dz_release_port, + .request_port = dz_request_port, + .config_port = dz_config_port, + .verify_port = dz_verify_port, +}; + +static void __init dz_init_ports(void) +{ + static int first = 1; + unsigned long base; + int line; + + if (!first) + return; + first = 0; + + if (mips_machtype == MACH_DS23100 || mips_machtype == MACH_DS5100) + base = dec_kn_slot_base + KN01_DZ11; + else + base = dec_kn_slot_base + KN02_DZ11; + + for (line = 0; line < DZ_NB_PORT; line++) { + struct dz_port *dport = &dz_mux.dport[line]; + struct uart_port *uport = &dport->port; + + dport->mux = &dz_mux; + + uport->irq = dec_interrupt[DEC_IRQ_DZ11]; + uport->fifosize = 1; + uport->iotype = UPIO_MEM; + uport->flags = UPF_BOOT_AUTOCONF; + uport->ops = &dz_ops; + uport->line = line; + uport->mapbase = base; + } +} + +#ifdef CONFIG_SERIAL_DZ_CONSOLE +/* + * ------------------------------------------------------------------- + * dz_console_putchar() -- transmit a character + * + * Polled transmission. This is tricky. We need to mask transmit + * interrupts so that they do not interfere, enable the transmitter + * for the line requested and then wait till the transmit scanner + * requests data for this line. But it may request data for another + * line first, in which case we have to disable its transmitter and + * repeat waiting till our line pops up. Only then the character may + * be transmitted. Finally, the state of the transmitter mask is + * restored. Welcome to the world of PDP-11! + * ------------------------------------------------------------------- + */ +static void dz_console_putchar(struct uart_port *uport, int ch) +{ + struct dz_port *dport = to_dport(uport); + unsigned long flags; + unsigned short csr, tcr, trdy, mask; + int loops = 10000; + + spin_lock_irqsave(&dport->port.lock, flags); + csr = dz_in(dport, DZ_CSR); + dz_out(dport, DZ_CSR, csr & ~DZ_TIE); + tcr = dz_in(dport, DZ_TCR); + tcr |= 1 << dport->port.line; + mask = tcr; + dz_out(dport, DZ_TCR, mask); + iob(); + spin_unlock_irqrestore(&dport->port.lock, flags); + + do { + trdy = dz_in(dport, DZ_CSR); + if (!(trdy & DZ_TRDY)) + continue; + trdy = (trdy & DZ_TLINE) >> 8; + if (trdy == dport->port.line) + break; + mask &= ~(1 << trdy); + dz_out(dport, DZ_TCR, mask); + iob(); + udelay(2); + } while (--loops); + + if (loops) /* Cannot send otherwise. */ + dz_out(dport, DZ_TDR, ch); + + dz_out(dport, DZ_TCR, tcr); + dz_out(dport, DZ_CSR, csr); +} + +/* + * ------------------------------------------------------------------- + * dz_console_print () + * + * dz_console_print is registered for printk. + * The console must be locked when we get here. + * ------------------------------------------------------------------- + */ +static void dz_console_print(struct console *co, + const char *str, + unsigned int count) +{ + struct dz_port *dport = &dz_mux.dport[co->index]; +#ifdef DEBUG_DZ + prom_printf((char *) str); +#endif + uart_console_write(&dport->port, str, count, dz_console_putchar); +} + +static int __init dz_console_setup(struct console *co, char *options) +{ + struct dz_port *dport = &dz_mux.dport[co->index]; + struct uart_port *uport = &dport->port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + ret = dz_map_port(uport); + if (ret) + return ret; + + spin_lock_init(&dport->port.lock); /* For dz_pm(). */ + + dz_reset(dport); + dz_pm(uport, 0, -1); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&dport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver dz_reg; +static struct console dz_console = { + .name = "ttyS", + .write = dz_console_print, + .device = uart_console_device, + .setup = dz_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &dz_reg, +}; + +static int __init dz_serial_console_init(void) +{ + if (!IOASIC) { + dz_init_ports(); + register_console(&dz_console); + return 0; + } else + return -ENXIO; +} + +console_initcall(dz_serial_console_init); + +#define SERIAL_DZ_CONSOLE &dz_console +#else +#define SERIAL_DZ_CONSOLE NULL +#endif /* CONFIG_SERIAL_DZ_CONSOLE */ + +static struct uart_driver dz_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = DZ_NB_PORT, + .cons = SERIAL_DZ_CONSOLE, +}; + +static int __init dz_init(void) +{ + int ret, i; + + if (IOASIC) + return -ENXIO; + + printk("%s%s\n", dz_name, dz_version); + + dz_init_ports(); + + ret = uart_register_driver(&dz_reg); + if (ret) + return ret; + + for (i = 0; i < DZ_NB_PORT; i++) + uart_add_one_port(&dz_reg, &dz_mux.dport[i].port); + + return 0; +} + +module_init(dz_init); diff --git a/drivers/tty/serial/dz.h b/drivers/tty/serial/dz.h new file mode 100644 index 000000000000..faf169ed27b3 --- /dev/null +++ b/drivers/tty/serial/dz.h @@ -0,0 +1,129 @@ +/* + * dz.h: Serial port driver for DECstations equipped + * with the DZ chipset. + * + * Copyright (C) 1998 Olivier A. D. Lebaillif + * + * Email: olivier.lebaillif@ifrsys.com + * + * Copyright (C) 2004, 2006 Maciej W. Rozycki + */ +#ifndef DZ_SERIAL_H +#define DZ_SERIAL_H + +/* + * Definitions for the Control and Status Register. + */ +#define DZ_TRDY 0x8000 /* Transmitter empty */ +#define DZ_TIE 0x4000 /* Transmitter Interrupt Enbl */ +#define DZ_TLINE 0x0300 /* Transmitter Line Number */ +#define DZ_RDONE 0x0080 /* Receiver data ready */ +#define DZ_RIE 0x0040 /* Receive Interrupt Enable */ +#define DZ_MSE 0x0020 /* Master Scan Enable */ +#define DZ_CLR 0x0010 /* Master reset */ +#define DZ_MAINT 0x0008 /* Loop Back Mode */ + +/* + * Definitions for the Receiver Buffer Register. + */ +#define DZ_RBUF_MASK 0x00FF /* Data Mask */ +#define DZ_LINE_MASK 0x0300 /* Line Mask */ +#define DZ_DVAL 0x8000 /* Valid Data indicator */ +#define DZ_OERR 0x4000 /* Overrun error indicator */ +#define DZ_FERR 0x2000 /* Frame error indicator */ +#define DZ_PERR 0x1000 /* Parity error indicator */ + +#define DZ_BREAK 0x0800 /* BREAK event software flag */ + +#define LINE(x) ((x & DZ_LINE_MASK) >> 8) /* Get the line number + from the input buffer */ +#define UCHAR(x) ((unsigned char)(x & DZ_RBUF_MASK)) + +/* + * Definitions for the Transmit Control Register. + */ +#define DZ_LINE_KEYBOARD 0x0001 +#define DZ_LINE_MOUSE 0x0002 +#define DZ_LINE_MODEM 0x0004 +#define DZ_LINE_PRINTER 0x0008 + +#define DZ_MODEM_RTS 0x0800 /* RTS for the modem line (2) */ +#define DZ_MODEM_DTR 0x0400 /* DTR for the modem line (2) */ +#define DZ_PRINT_RTS 0x0200 /* RTS for the prntr line (3) */ +#define DZ_PRINT_DTR 0x0100 /* DTR for the prntr line (3) */ +#define DZ_LNENB 0x000f /* Transmitter Line Enable */ + +/* + * Definitions for the Modem Status Register. + */ +#define DZ_MODEM_RI 0x0800 /* RI for the modem line (2) */ +#define DZ_MODEM_CD 0x0400 /* CD for the modem line (2) */ +#define DZ_MODEM_DSR 0x0200 /* DSR for the modem line (2) */ +#define DZ_MODEM_CTS 0x0100 /* CTS for the modem line (2) */ +#define DZ_PRINT_RI 0x0008 /* RI for the printer line (3) */ +#define DZ_PRINT_CD 0x0004 /* CD for the printer line (3) */ +#define DZ_PRINT_DSR 0x0002 /* DSR for the prntr line (3) */ +#define DZ_PRINT_CTS 0x0001 /* CTS for the prntr line (3) */ + +/* + * Definitions for the Transmit Data Register. + */ +#define DZ_BRK0 0x0100 /* Break assertion for line 0 */ +#define DZ_BRK1 0x0200 /* Break assertion for line 1 */ +#define DZ_BRK2 0x0400 /* Break assertion for line 2 */ +#define DZ_BRK3 0x0800 /* Break assertion for line 3 */ + +/* + * Definitions for the Line Parameter Register. + */ +#define DZ_KEYBOARD 0x0000 /* line 0 = keyboard */ +#define DZ_MOUSE 0x0001 /* line 1 = mouse */ +#define DZ_MODEM 0x0002 /* line 2 = modem */ +#define DZ_PRINTER 0x0003 /* line 3 = printer */ + +#define DZ_CSIZE 0x0018 /* Number of bits per byte (mask) */ +#define DZ_CS5 0x0000 /* 5 bits per byte */ +#define DZ_CS6 0x0008 /* 6 bits per byte */ +#define DZ_CS7 0x0010 /* 7 bits per byte */ +#define DZ_CS8 0x0018 /* 8 bits per byte */ + +#define DZ_CSTOPB 0x0020 /* 2 stop bits instead of one */ + +#define DZ_PARENB 0x0040 /* Parity enable */ +#define DZ_PARODD 0x0080 /* Odd parity instead of even */ + +#define DZ_CBAUD 0x0E00 /* Baud Rate (mask) */ +#define DZ_B50 0x0000 +#define DZ_B75 0x0100 +#define DZ_B110 0x0200 +#define DZ_B134 0x0300 +#define DZ_B150 0x0400 +#define DZ_B300 0x0500 +#define DZ_B600 0x0600 +#define DZ_B1200 0x0700 +#define DZ_B1800 0x0800 +#define DZ_B2000 0x0900 +#define DZ_B2400 0x0A00 +#define DZ_B3600 0x0B00 +#define DZ_B4800 0x0C00 +#define DZ_B7200 0x0D00 +#define DZ_B9600 0x0E00 + +#define DZ_RXENAB 0x1000 /* Receiver Enable */ + +/* + * Addresses for the DZ registers + */ +#define DZ_CSR 0x00 /* Control and Status Register */ +#define DZ_RBUF 0x08 /* Receive Buffer */ +#define DZ_LPR 0x08 /* Line Parameters Register */ +#define DZ_TCR 0x10 /* Transmitter Control Register */ +#define DZ_MSR 0x18 /* Modem Status Register */ +#define DZ_TDR 0x18 /* Transmit Data Register */ + +#define DZ_NB_PORT 4 + +#define DZ_XMIT_SIZE 4096 /* buffer size */ +#define DZ_WAKEUP_CHARS DZ_XMIT_SIZE/4 + +#endif /* DZ_SERIAL_H */ diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c new file mode 100644 index 000000000000..53a468227056 --- /dev/null +++ b/drivers/tty/serial/icom.c @@ -0,0 +1,1658 @@ +/* + * icom.c + * + * Copyright (C) 2001 IBM Corporation. All rights reserved. + * + * Serial device driver. + * + * Based on code from serial.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#define SERIAL_DO_RESTART +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "icom.h" + +/*#define ICOM_TRACE enable port trace capabilities */ + +#define ICOM_DRIVER_NAME "icom" +#define ICOM_VERSION_STR "1.3.1" +#define NR_PORTS 128 +#define ICOM_PORT ((struct icom_port *)port) +#define to_icom_adapter(d) container_of(d, struct icom_adapter, kref) + +static const struct pci_device_id icom_pci_table[] = { + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = ADAPTER_V1, + }, + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX, + .driver_data = ADAPTER_V2, + }, + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM, + .driver_data = ADAPTER_V2, + }, + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL, + .driver_data = ADAPTER_V2, + }, + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE, + .driver_data = ADAPTER_V2, + }, + {} +}; + +struct lookup_proc_table start_proc[4] = { + {NULL, ICOM_CONTROL_START_A}, + {NULL, ICOM_CONTROL_START_B}, + {NULL, ICOM_CONTROL_START_C}, + {NULL, ICOM_CONTROL_START_D} +}; + + +struct lookup_proc_table stop_proc[4] = { + {NULL, ICOM_CONTROL_STOP_A}, + {NULL, ICOM_CONTROL_STOP_B}, + {NULL, ICOM_CONTROL_STOP_C}, + {NULL, ICOM_CONTROL_STOP_D} +}; + +struct lookup_int_table int_mask_tbl[4] = { + {NULL, ICOM_INT_MASK_PRC_A}, + {NULL, ICOM_INT_MASK_PRC_B}, + {NULL, ICOM_INT_MASK_PRC_C}, + {NULL, ICOM_INT_MASK_PRC_D}, +}; + + +MODULE_DEVICE_TABLE(pci, icom_pci_table); + +static LIST_HEAD(icom_adapter_head); + +/* spinlock for adapter initialization and changing adapter operations */ +static spinlock_t icom_lock; + +#ifdef ICOM_TRACE +static inline void trace(struct icom_port *icom_port, char *trace_pt, + unsigned long trace_data) +{ + dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n", + icom_port->port, trace_pt, trace_data); +} +#else +static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {}; +#endif +static void icom_kref_release(struct kref *kref); + +static void free_port_memory(struct icom_port *icom_port) +{ + struct pci_dev *dev = icom_port->adapter->pci_dev; + + trace(icom_port, "RET_PORT_MEM", 0); + if (icom_port->recv_buf) { + pci_free_consistent(dev, 4096, icom_port->recv_buf, + icom_port->recv_buf_pci); + icom_port->recv_buf = NULL; + } + if (icom_port->xmit_buf) { + pci_free_consistent(dev, 4096, icom_port->xmit_buf, + icom_port->xmit_buf_pci); + icom_port->xmit_buf = NULL; + } + if (icom_port->statStg) { + pci_free_consistent(dev, 4096, icom_port->statStg, + icom_port->statStg_pci); + icom_port->statStg = NULL; + } + + if (icom_port->xmitRestart) { + pci_free_consistent(dev, 4096, icom_port->xmitRestart, + icom_port->xmitRestart_pci); + icom_port->xmitRestart = NULL; + } +} + +static int __devinit get_port_memory(struct icom_port *icom_port) +{ + int index; + unsigned long stgAddr; + unsigned long startStgAddr; + unsigned long offset; + struct pci_dev *dev = icom_port->adapter->pci_dev; + + icom_port->xmit_buf = + pci_alloc_consistent(dev, 4096, &icom_port->xmit_buf_pci); + if (!icom_port->xmit_buf) { + dev_err(&dev->dev, "Can not allocate Transmit buffer\n"); + return -ENOMEM; + } + + trace(icom_port, "GET_PORT_MEM", + (unsigned long) icom_port->xmit_buf); + + icom_port->recv_buf = + pci_alloc_consistent(dev, 4096, &icom_port->recv_buf_pci); + if (!icom_port->recv_buf) { + dev_err(&dev->dev, "Can not allocate Receive buffer\n"); + free_port_memory(icom_port); + return -ENOMEM; + } + trace(icom_port, "GET_PORT_MEM", + (unsigned long) icom_port->recv_buf); + + icom_port->statStg = + pci_alloc_consistent(dev, 4096, &icom_port->statStg_pci); + if (!icom_port->statStg) { + dev_err(&dev->dev, "Can not allocate Status buffer\n"); + free_port_memory(icom_port); + return -ENOMEM; + } + trace(icom_port, "GET_PORT_MEM", + (unsigned long) icom_port->statStg); + + icom_port->xmitRestart = + pci_alloc_consistent(dev, 4096, &icom_port->xmitRestart_pci); + if (!icom_port->xmitRestart) { + dev_err(&dev->dev, + "Can not allocate xmit Restart buffer\n"); + free_port_memory(icom_port); + return -ENOMEM; + } + + memset(icom_port->statStg, 0, 4096); + + /* FODs: Frame Out Descriptor Queue, this is a FIFO queue that + indicates that frames are to be transmitted + */ + + stgAddr = (unsigned long) icom_port->statStg; + for (index = 0; index < NUM_XBUFFS; index++) { + trace(icom_port, "FOD_ADDR", stgAddr); + stgAddr = stgAddr + sizeof(icom_port->statStg->xmit[0]); + if (index < (NUM_XBUFFS - 1)) { + memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); + icom_port->statStg->xmit[index].leLengthASD = + (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); + trace(icom_port, "FOD_ADDR", stgAddr); + trace(icom_port, "FOD_XBUFF", + (unsigned long) icom_port->xmit_buf); + icom_port->statStg->xmit[index].leBuffer = + cpu_to_le32(icom_port->xmit_buf_pci); + } else if (index == (NUM_XBUFFS - 1)) { + memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); + icom_port->statStg->xmit[index].leLengthASD = + (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); + trace(icom_port, "FOD_XBUFF", + (unsigned long) icom_port->xmit_buf); + icom_port->statStg->xmit[index].leBuffer = + cpu_to_le32(icom_port->xmit_buf_pci); + } else { + memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); + } + } + /* FIDs */ + startStgAddr = stgAddr; + + /* fill in every entry, even if no buffer */ + for (index = 0; index < NUM_RBUFFS; index++) { + trace(icom_port, "FID_ADDR", stgAddr); + stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]); + icom_port->statStg->rcv[index].leLength = 0; + icom_port->statStg->rcv[index].WorkingLength = + (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); + if (index < (NUM_RBUFFS - 1) ) { + offset = stgAddr - (unsigned long) icom_port->statStg; + icom_port->statStg->rcv[index].leNext = + cpu_to_le32(icom_port-> statStg_pci + offset); + trace(icom_port, "FID_RBUFF", + (unsigned long) icom_port->recv_buf); + icom_port->statStg->rcv[index].leBuffer = + cpu_to_le32(icom_port->recv_buf_pci); + } else if (index == (NUM_RBUFFS -1) ) { + offset = startStgAddr - (unsigned long) icom_port->statStg; + icom_port->statStg->rcv[index].leNext = + cpu_to_le32(icom_port-> statStg_pci + offset); + trace(icom_port, "FID_RBUFF", + (unsigned long) icom_port->recv_buf + 2048); + icom_port->statStg->rcv[index].leBuffer = + cpu_to_le32(icom_port->recv_buf_pci + 2048); + } else { + icom_port->statStg->rcv[index].leNext = 0; + icom_port->statStg->rcv[index].leBuffer = 0; + } + } + + return 0; +} + +static void stop_processor(struct icom_port *icom_port) +{ + unsigned long temp; + unsigned long flags; + int port; + + spin_lock_irqsave(&icom_lock, flags); + + port = icom_port->port; + if (port == 0 || port == 1) + stop_proc[port].global_control_reg = &icom_port->global_reg->control; + else + stop_proc[port].global_control_reg = &icom_port->global_reg->control_2; + + + if (port < 4) { + temp = readl(stop_proc[port].global_control_reg); + temp = + (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; + writel(temp, stop_proc[port].global_control_reg); + + /* write flush */ + readl(stop_proc[port].global_control_reg); + } else { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + } + + spin_unlock_irqrestore(&icom_lock, flags); +} + +static void start_processor(struct icom_port *icom_port) +{ + unsigned long temp; + unsigned long flags; + int port; + + spin_lock_irqsave(&icom_lock, flags); + + port = icom_port->port; + if (port == 0 || port == 1) + start_proc[port].global_control_reg = &icom_port->global_reg->control; + else + start_proc[port].global_control_reg = &icom_port->global_reg->control_2; + if (port < 4) { + temp = readl(start_proc[port].global_control_reg); + temp = + (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; + writel(temp, start_proc[port].global_control_reg); + + /* write flush */ + readl(start_proc[port].global_control_reg); + } else { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + } + + spin_unlock_irqrestore(&icom_lock, flags); +} + +static void load_code(struct icom_port *icom_port) +{ + const struct firmware *fw; + char __iomem *iram_ptr; + int index; + int status = 0; + void __iomem *dram_ptr = icom_port->dram; + dma_addr_t temp_pci; + unsigned char *new_page = NULL; + unsigned char cable_id = NO_CABLE; + struct pci_dev *dev = icom_port->adapter->pci_dev; + + /* Clear out any pending interrupts */ + writew(0x3FFF, icom_port->int_reg); + + trace(icom_port, "CLEAR_INTERRUPTS", 0); + + /* Stop processor */ + stop_processor(icom_port); + + /* Zero out DRAM */ + memset_io(dram_ptr, 0, 512); + + /* Load Call Setup into Adapter */ + if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) { + dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n"); + status = -1; + goto load_code_exit; + } + + if (fw->size > ICOM_DCE_IRAM_OFFSET) { + dev_err(&dev->dev, "Invalid firmware image for icom_call_setup.bin found.\n"); + release_firmware(fw); + status = -1; + goto load_code_exit; + } + + iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET; + for (index = 0; index < fw->size; index++) + writeb(fw->data[index], &iram_ptr[index]); + + release_firmware(fw); + + /* Load Resident DCE portion of Adapter */ + if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) { + dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n"); + status = -1; + goto load_code_exit; + } + + if (fw->size > ICOM_IRAM_SIZE) { + dev_err(&dev->dev, "Invalid firmware image for icom_res_dce.bin found.\n"); + release_firmware(fw); + status = -1; + goto load_code_exit; + } + + iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET; + for (index = ICOM_DCE_IRAM_OFFSET; index < fw->size; index++) + writeb(fw->data[index], &iram_ptr[index]); + + release_firmware(fw); + + /* Set Hardware level */ + if (icom_port->adapter->version == ADAPTER_V2) + writeb(V2_HARDWARE, &(icom_port->dram->misc_flags)); + + /* Start the processor in Adapter */ + start_processor(icom_port); + + writeb((HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL), + &(icom_port->dram->HDLCConfigReg)); + writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */ + writeb(0x00, &(icom_port->dram->CmdReg)); + writeb(0x10, &(icom_port->dram->async_config3)); + writeb((ICOM_ACFG_DRIVE1 | ICOM_ACFG_NO_PARITY | ICOM_ACFG_8BPC | + ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2)); + + /*Set up data in icom DRAM to indicate where personality + *code is located and its length. + */ + new_page = pci_alloc_consistent(dev, 4096, &temp_pci); + + if (!new_page) { + dev_err(&dev->dev, "Can not allocate DMA buffer\n"); + status = -1; + goto load_code_exit; + } + + if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) { + dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n"); + status = -1; + goto load_code_exit; + } + + if (fw->size > ICOM_DCE_IRAM_OFFSET) { + dev_err(&dev->dev, "Invalid firmware image for icom_asc.bin found.\n"); + release_firmware(fw); + status = -1; + goto load_code_exit; + } + + for (index = 0; index < fw->size; index++) + new_page[index] = fw->data[index]; + + release_firmware(fw); + + writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length); + writel(temp_pci, &icom_port->dram->mac_load_addr); + + /*Setting the syncReg to 0x80 causes adapter to start downloading + the personality code into adapter instruction RAM. + Once code is loaded, it will begin executing and, based on + information provided above, will start DMAing data from + shared memory to adapter DRAM. + */ + /* the wait loop below verifies this write operation has been done + and processed + */ + writeb(START_DOWNLOAD, &icom_port->dram->sync); + + /* Wait max 1 Sec for data download and processor to start */ + for (index = 0; index < 10; index++) { + msleep(100); + if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE) + break; + } + + if (index == 10) + status = -1; + + /* + * check Cable ID + */ + cable_id = readb(&icom_port->dram->cable_id); + + if (cable_id & ICOM_CABLE_ID_VALID) { + /* Get cable ID into the lower 4 bits (standard form) */ + cable_id = (cable_id & ICOM_CABLE_ID_MASK) >> 4; + icom_port->cable_id = cable_id; + } else { + dev_err(&dev->dev,"Invalid or no cable attached\n"); + icom_port->cable_id = NO_CABLE; + } + + load_code_exit: + + if (status != 0) { + /* Clear out any pending interrupts */ + writew(0x3FFF, icom_port->int_reg); + + /* Turn off port */ + writeb(ICOM_DISABLE, &(icom_port->dram->disable)); + + /* Stop processor */ + stop_processor(icom_port); + + dev_err(&icom_port->adapter->pci_dev->dev,"Port not opertional\n"); + } + + if (new_page != NULL) + pci_free_consistent(dev, 4096, new_page, temp_pci); +} + +static int startup(struct icom_port *icom_port) +{ + unsigned long temp; + unsigned char cable_id, raw_cable_id; + unsigned long flags; + int port; + + trace(icom_port, "STARTUP", 0); + + if (!icom_port->dram) { + /* should NEVER be NULL */ + dev_err(&icom_port->adapter->pci_dev->dev, + "Unusable Port, port configuration missing\n"); + return -ENODEV; + } + + /* + * check Cable ID + */ + raw_cable_id = readb(&icom_port->dram->cable_id); + trace(icom_port, "CABLE_ID", raw_cable_id); + + /* Get cable ID into the lower 4 bits (standard form) */ + cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; + + /* Check for valid Cable ID */ + if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || + (cable_id != icom_port->cable_id)) { + + /* reload adapter code, pick up any potential changes in cable id */ + load_code(icom_port); + + /* still no sign of cable, error out */ + raw_cable_id = readb(&icom_port->dram->cable_id); + cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; + if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || + (icom_port->cable_id == NO_CABLE)) + return -EIO; + } + + /* + * Finally, clear and enable interrupts + */ + spin_lock_irqsave(&icom_lock, flags); + port = icom_port->port; + if (port == 0 || port == 1) + int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; + else + int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; + + if (port == 0 || port == 2) + writew(0x00FF, icom_port->int_reg); + else + writew(0x3F00, icom_port->int_reg); + if (port < 4) { + temp = readl(int_mask_tbl[port].global_int_mask); + writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); + + /* write flush */ + readl(int_mask_tbl[port].global_int_mask); + } else { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + } + + spin_unlock_irqrestore(&icom_lock, flags); + return 0; +} + +static void shutdown(struct icom_port *icom_port) +{ + unsigned long temp; + unsigned char cmdReg; + unsigned long flags; + int port; + + spin_lock_irqsave(&icom_lock, flags); + trace(icom_port, "SHUTDOWN", 0); + + /* + * disable all interrupts + */ + port = icom_port->port; + if (port == 0 || port == 1) + int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; + else + int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; + + if (port < 4) { + temp = readl(int_mask_tbl[port].global_int_mask); + writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); + + /* write flush */ + readl(int_mask_tbl[port].global_int_mask); + } else { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + } + spin_unlock_irqrestore(&icom_lock, flags); + + /* + * disable break condition + */ + cmdReg = readb(&icom_port->dram->CmdReg); + if (cmdReg & CMD_SND_BREAK) { + writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg); + } +} + +static int icom_write(struct uart_port *port) +{ + unsigned long data_count; + unsigned char cmdReg; + unsigned long offset; + int temp_tail = port->state->xmit.tail; + + trace(ICOM_PORT, "WRITE", 0); + + if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & + SA_FLAGS_READY_TO_XMIT) { + trace(ICOM_PORT, "WRITE_FULL", 0); + return 0; + } + + data_count = 0; + while ((port->state->xmit.head != temp_tail) && + (data_count <= XMIT_BUFF_SZ)) { + + ICOM_PORT->xmit_buf[data_count++] = + port->state->xmit.buf[temp_tail]; + + temp_tail++; + temp_tail &= (UART_XMIT_SIZE - 1); + } + + if (data_count) { + ICOM_PORT->statStg->xmit[0].flags = + cpu_to_le16(SA_FLAGS_READY_TO_XMIT); + ICOM_PORT->statStg->xmit[0].leLength = + cpu_to_le16(data_count); + offset = + (unsigned long) &ICOM_PORT->statStg->xmit[0] - + (unsigned long) ICOM_PORT->statStg; + *ICOM_PORT->xmitRestart = + cpu_to_le32(ICOM_PORT->statStg_pci + offset); + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + writeb(cmdReg | CMD_XMIT_RCV_ENABLE, + &ICOM_PORT->dram->CmdReg); + writeb(START_XMIT, &ICOM_PORT->dram->StartXmitCmd); + trace(ICOM_PORT, "WRITE_START", data_count); + /* write flush */ + readb(&ICOM_PORT->dram->StartXmitCmd); + } + + return data_count; +} + +static inline void check_modem_status(struct icom_port *icom_port) +{ + static char old_status = 0; + char delta_status; + unsigned char status; + + spin_lock(&icom_port->uart_port.lock); + + /*modem input register */ + status = readb(&icom_port->dram->isr); + trace(icom_port, "CHECK_MODEM", status); + delta_status = status ^ old_status; + if (delta_status) { + if (delta_status & ICOM_RI) + icom_port->uart_port.icount.rng++; + if (delta_status & ICOM_DSR) + icom_port->uart_port.icount.dsr++; + if (delta_status & ICOM_DCD) + uart_handle_dcd_change(&icom_port->uart_port, + delta_status & ICOM_DCD); + if (delta_status & ICOM_CTS) + uart_handle_cts_change(&icom_port->uart_port, + delta_status & ICOM_CTS); + + wake_up_interruptible(&icom_port->uart_port.state-> + port.delta_msr_wait); + old_status = status; + } + spin_unlock(&icom_port->uart_port.lock); +} + +static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port) +{ + unsigned short int count; + int i; + + if (port_int_reg & (INT_XMIT_COMPLETED)) { + trace(icom_port, "XMIT_COMPLETE", 0); + + /* clear buffer in use bit */ + icom_port->statStg->xmit[0].flags &= + cpu_to_le16(~SA_FLAGS_READY_TO_XMIT); + + count = (unsigned short int) + cpu_to_le16(icom_port->statStg->xmit[0].leLength); + icom_port->uart_port.icount.tx += count; + + for (i=0; iuart_port.state->xmit); i++) { + + icom_port->uart_port.state->xmit.tail++; + icom_port->uart_port.state->xmit.tail &= + (UART_XMIT_SIZE - 1); + } + + if (!icom_write(&icom_port->uart_port)) + /* activate write queue */ + uart_write_wakeup(&icom_port->uart_port); + } else + trace(icom_port, "XMIT_DISABLED", 0); +} + +static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) +{ + short int count, rcv_buff; + struct tty_struct *tty = icom_port->uart_port.state->port.tty; + unsigned short int status; + struct uart_icount *icount; + unsigned long offset; + unsigned char flag; + + trace(icom_port, "RCV_COMPLETE", 0); + rcv_buff = icom_port->next_rcv; + + status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); + while (status & SA_FL_RCV_DONE) { + int first = -1; + + trace(icom_port, "FID_STATUS", status); + count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength); + + trace(icom_port, "RCV_COUNT", count); + + trace(icom_port, "REAL_COUNT", count); + + offset = + cpu_to_le32(icom_port->statStg->rcv[rcv_buff].leBuffer) - + icom_port->recv_buf_pci; + + /* Block copy all but the last byte as this may have status */ + if (count > 0) { + first = icom_port->recv_buf[offset]; + tty_insert_flip_string(tty, icom_port->recv_buf + offset, count - 1); + } + + icount = &icom_port->uart_port.icount; + icount->rx += count; + + /* Break detect logic */ + if ((status & SA_FLAGS_FRAME_ERROR) + && first == 0) { + status &= ~SA_FLAGS_FRAME_ERROR; + status |= SA_FLAGS_BREAK_DET; + trace(icom_port, "BREAK_DET", 0); + } + + flag = TTY_NORMAL; + + if (status & + (SA_FLAGS_BREAK_DET | SA_FLAGS_PARITY_ERROR | + SA_FLAGS_FRAME_ERROR | SA_FLAGS_OVERRUN)) { + + if (status & SA_FLAGS_BREAK_DET) + icount->brk++; + if (status & SA_FLAGS_PARITY_ERROR) + icount->parity++; + if (status & SA_FLAGS_FRAME_ERROR) + icount->frame++; + if (status & SA_FLAGS_OVERRUN) + icount->overrun++; + + /* + * Now check to see if character should be + * ignored, and mask off conditions which + * should be ignored. + */ + if (status & icom_port->ignore_status_mask) { + trace(icom_port, "IGNORE_CHAR", 0); + goto ignore_char; + } + + status &= icom_port->read_status_mask; + + if (status & SA_FLAGS_BREAK_DET) { + flag = TTY_BREAK; + } else if (status & SA_FLAGS_PARITY_ERROR) { + trace(icom_port, "PARITY_ERROR", 0); + flag = TTY_PARITY; + } else if (status & SA_FLAGS_FRAME_ERROR) + flag = TTY_FRAME; + + } + + tty_insert_flip_char(tty, *(icom_port->recv_buf + offset + count - 1), flag); + + if (status & SA_FLAGS_OVERRUN) + /* + * Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); +ignore_char: + icom_port->statStg->rcv[rcv_buff].flags = 0; + icom_port->statStg->rcv[rcv_buff].leLength = 0; + icom_port->statStg->rcv[rcv_buff].WorkingLength = + (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); + + rcv_buff++; + if (rcv_buff == NUM_RBUFFS) + rcv_buff = 0; + + status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); + } + icom_port->next_rcv = rcv_buff; + tty_flip_buffer_push(tty); +} + +static void process_interrupt(u16 port_int_reg, + struct icom_port *icom_port) +{ + + spin_lock(&icom_port->uart_port.lock); + trace(icom_port, "INTERRUPT", port_int_reg); + + if (port_int_reg & (INT_XMIT_COMPLETED | INT_XMIT_DISABLED)) + xmit_interrupt(port_int_reg, icom_port); + + if (port_int_reg & INT_RCV_COMPLETED) + recv_interrupt(port_int_reg, icom_port); + + spin_unlock(&icom_port->uart_port.lock); +} + +static irqreturn_t icom_interrupt(int irq, void *dev_id) +{ + void __iomem * int_reg; + u32 adapter_interrupts; + u16 port_int_reg; + struct icom_adapter *icom_adapter; + struct icom_port *icom_port; + + /* find icom_port for this interrupt */ + icom_adapter = (struct icom_adapter *) dev_id; + + if (icom_adapter->version == ADAPTER_V2) { + int_reg = icom_adapter->base_addr + 0x8024; + + adapter_interrupts = readl(int_reg); + + if (adapter_interrupts & 0x00003FFF) { + /* port 2 interrupt, NOTE: for all ADAPTER_V2, port 2 will be active */ + icom_port = &icom_adapter->port_info[2]; + port_int_reg = (u16) adapter_interrupts; + process_interrupt(port_int_reg, icom_port); + check_modem_status(icom_port); + } + if (adapter_interrupts & 0x3FFF0000) { + /* port 3 interrupt */ + icom_port = &icom_adapter->port_info[3]; + if (icom_port->status == ICOM_PORT_ACTIVE) { + port_int_reg = + (u16) (adapter_interrupts >> 16); + process_interrupt(port_int_reg, icom_port); + check_modem_status(icom_port); + } + } + + /* Clear out any pending interrupts */ + writel(adapter_interrupts, int_reg); + + int_reg = icom_adapter->base_addr + 0x8004; + } else { + int_reg = icom_adapter->base_addr + 0x4004; + } + + adapter_interrupts = readl(int_reg); + + if (adapter_interrupts & 0x00003FFF) { + /* port 0 interrupt, NOTE: for all adapters, port 0 will be active */ + icom_port = &icom_adapter->port_info[0]; + port_int_reg = (u16) adapter_interrupts; + process_interrupt(port_int_reg, icom_port); + check_modem_status(icom_port); + } + if (adapter_interrupts & 0x3FFF0000) { + /* port 1 interrupt */ + icom_port = &icom_adapter->port_info[1]; + if (icom_port->status == ICOM_PORT_ACTIVE) { + port_int_reg = (u16) (adapter_interrupts >> 16); + process_interrupt(port_int_reg, icom_port); + check_modem_status(icom_port); + } + } + + /* Clear out any pending interrupts */ + writel(adapter_interrupts, int_reg); + + /* flush the write */ + adapter_interrupts = readl(int_reg); + + return IRQ_HANDLED; +} + +/* + * ------------------------------------------------------------------ + * Begin serial-core API + * ------------------------------------------------------------------ + */ +static unsigned int icom_tx_empty(struct uart_port *port) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & + SA_FLAGS_READY_TO_XMIT) + ret = TIOCSER_TEMT; + else + ret = 0; + + spin_unlock_irqrestore(&port->lock, flags); + return ret; +} + +static void icom_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned char local_osr; + + trace(ICOM_PORT, "SET_MODEM", 0); + local_osr = readb(&ICOM_PORT->dram->osr); + + if (mctrl & TIOCM_RTS) { + trace(ICOM_PORT, "RAISE_RTS", 0); + local_osr |= ICOM_RTS; + } else { + trace(ICOM_PORT, "LOWER_RTS", 0); + local_osr &= ~ICOM_RTS; + } + + if (mctrl & TIOCM_DTR) { + trace(ICOM_PORT, "RAISE_DTR", 0); + local_osr |= ICOM_DTR; + } else { + trace(ICOM_PORT, "LOWER_DTR", 0); + local_osr &= ~ICOM_DTR; + } + + writeb(local_osr, &ICOM_PORT->dram->osr); +} + +static unsigned int icom_get_mctrl(struct uart_port *port) +{ + unsigned char status; + unsigned int result; + + trace(ICOM_PORT, "GET_MODEM", 0); + + status = readb(&ICOM_PORT->dram->isr); + + result = ((status & ICOM_DCD) ? TIOCM_CAR : 0) + | ((status & ICOM_RI) ? TIOCM_RNG : 0) + | ((status & ICOM_DSR) ? TIOCM_DSR : 0) + | ((status & ICOM_CTS) ? TIOCM_CTS : 0); + return result; +} + +static void icom_stop_tx(struct uart_port *port) +{ + unsigned char cmdReg; + + trace(ICOM_PORT, "STOP", 0); + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + writeb(cmdReg | CMD_HOLD_XMIT, &ICOM_PORT->dram->CmdReg); +} + +static void icom_start_tx(struct uart_port *port) +{ + unsigned char cmdReg; + + trace(ICOM_PORT, "START", 0); + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + if ((cmdReg & CMD_HOLD_XMIT) == CMD_HOLD_XMIT) + writeb(cmdReg & ~CMD_HOLD_XMIT, + &ICOM_PORT->dram->CmdReg); + + icom_write(port); +} + +static void icom_send_xchar(struct uart_port *port, char ch) +{ + unsigned char xdata; + int index; + unsigned long flags; + + trace(ICOM_PORT, "SEND_XCHAR", ch); + + /* wait .1 sec to send char */ + for (index = 0; index < 10; index++) { + spin_lock_irqsave(&port->lock, flags); + xdata = readb(&ICOM_PORT->dram->xchar); + if (xdata == 0x00) { + trace(ICOM_PORT, "QUICK_WRITE", 0); + writeb(ch, &ICOM_PORT->dram->xchar); + + /* flush write operation */ + xdata = readb(&ICOM_PORT->dram->xchar); + spin_unlock_irqrestore(&port->lock, flags); + break; + } + spin_unlock_irqrestore(&port->lock, flags); + msleep(10); + } +} + +static void icom_stop_rx(struct uart_port *port) +{ + unsigned char cmdReg; + + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); +} + +static void icom_enable_ms(struct uart_port *port) +{ + /* no-op */ +} + +static void icom_break(struct uart_port *port, int break_state) +{ + unsigned char cmdReg; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + trace(ICOM_PORT, "BREAK", 0); + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + if (break_state == -1) { + writeb(cmdReg | CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); + } else { + writeb(cmdReg & ~CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); + } + spin_unlock_irqrestore(&port->lock, flags); +} + +static int icom_open(struct uart_port *port) +{ + int retval; + + kref_get(&ICOM_PORT->adapter->kref); + retval = startup(ICOM_PORT); + + if (retval) { + kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); + trace(ICOM_PORT, "STARTUP_ERROR", 0); + return retval; + } + + return 0; +} + +static void icom_close(struct uart_port *port) +{ + unsigned char cmdReg; + + trace(ICOM_PORT, "CLOSE", 0); + + /* stop receiver */ + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + writeb(cmdReg & (unsigned char) ~CMD_RCV_ENABLE, + &ICOM_PORT->dram->CmdReg); + + shutdown(ICOM_PORT); + + kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); +} + +static void icom_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old_termios) +{ + int baud; + unsigned cflag, iflag; + char new_config2; + char new_config3 = 0; + char tmp_byte; + int index; + int rcv_buff, xmit_buff; + unsigned long offset; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + trace(ICOM_PORT, "CHANGE_SPEED", 0); + + cflag = termios->c_cflag; + iflag = termios->c_iflag; + + new_config2 = ICOM_ACFG_DRIVE1; + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: /* 5 bits/char */ + new_config2 |= ICOM_ACFG_5BPC; + break; + case CS6: /* 6 bits/char */ + new_config2 |= ICOM_ACFG_6BPC; + break; + case CS7: /* 7 bits/char */ + new_config2 |= ICOM_ACFG_7BPC; + break; + case CS8: /* 8 bits/char */ + new_config2 |= ICOM_ACFG_8BPC; + break; + default: + break; + } + if (cflag & CSTOPB) { + /* 2 stop bits */ + new_config2 |= ICOM_ACFG_2STOP_BIT; + } + if (cflag & PARENB) { + /* parity bit enabled */ + new_config2 |= ICOM_ACFG_PARITY_ENAB; + trace(ICOM_PORT, "PARENB", 0); + } + if (cflag & PARODD) { + /* odd parity */ + new_config2 |= ICOM_ACFG_PARITY_ODD; + trace(ICOM_PORT, "PARODD", 0); + } + + /* Determine divisor based on baud rate */ + baud = uart_get_baud_rate(port, termios, old_termios, + icom_acfg_baud[0], + icom_acfg_baud[BAUD_TABLE_LIMIT]); + if (!baud) + baud = 9600; /* B0 transition handled in rs_set_termios */ + + for (index = 0; index < BAUD_TABLE_LIMIT; index++) { + if (icom_acfg_baud[index] == baud) { + new_config3 = index; + break; + } + } + + uart_update_timeout(port, cflag, baud); + + /* CTS flow control flag and modem status interrupts */ + tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); + if (cflag & CRTSCTS) + tmp_byte |= HDLC_HDW_FLOW; + else + tmp_byte &= ~HDLC_HDW_FLOW; + writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); + + /* + * Set up parity check flag + */ + ICOM_PORT->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE; + if (iflag & INPCK) + ICOM_PORT->read_status_mask |= + SA_FLAGS_FRAME_ERROR | SA_FLAGS_PARITY_ERROR; + + if ((iflag & BRKINT) || (iflag & PARMRK)) + ICOM_PORT->read_status_mask |= SA_FLAGS_BREAK_DET; + + /* + * Characters to ignore + */ + ICOM_PORT->ignore_status_mask = 0; + if (iflag & IGNPAR) + ICOM_PORT->ignore_status_mask |= + SA_FLAGS_PARITY_ERROR | SA_FLAGS_FRAME_ERROR; + if (iflag & IGNBRK) { + ICOM_PORT->ignore_status_mask |= SA_FLAGS_BREAK_DET; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (iflag & IGNPAR) + ICOM_PORT->ignore_status_mask |= SA_FLAGS_OVERRUN; + } + + /* + * !!! ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + ICOM_PORT->ignore_status_mask |= SA_FL_RCV_DONE; + + /* Turn off Receiver to prepare for reset */ + writeb(CMD_RCV_DISABLE, &ICOM_PORT->dram->CmdReg); + + for (index = 0; index < 10; index++) { + if (readb(&ICOM_PORT->dram->PrevCmdReg) == 0x00) { + break; + } + } + + /* clear all current buffers of data */ + for (rcv_buff = 0; rcv_buff < NUM_RBUFFS; rcv_buff++) { + ICOM_PORT->statStg->rcv[rcv_buff].flags = 0; + ICOM_PORT->statStg->rcv[rcv_buff].leLength = 0; + ICOM_PORT->statStg->rcv[rcv_buff].WorkingLength = + (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); + } + + for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) { + ICOM_PORT->statStg->xmit[xmit_buff].flags = 0; + } + + /* activate changes and start xmit and receiver here */ + /* Enable the receiver */ + writeb(new_config3, &(ICOM_PORT->dram->async_config3)); + writeb(new_config2, &(ICOM_PORT->dram->async_config2)); + tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); + tmp_byte |= HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL; + writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); + writeb(0x04, &(ICOM_PORT->dram->FlagFillIdleTimer)); /* 0.5 seconds */ + writeb(0xFF, &(ICOM_PORT->dram->ier)); /* enable modem signal interrupts */ + + /* reset processor */ + writeb(CMD_RESTART, &ICOM_PORT->dram->CmdReg); + + for (index = 0; index < 10; index++) { + if (readb(&ICOM_PORT->dram->CmdReg) == 0x00) { + break; + } + } + + /* Enable Transmitter and Reciever */ + offset = + (unsigned long) &ICOM_PORT->statStg->rcv[0] - + (unsigned long) ICOM_PORT->statStg; + writel(ICOM_PORT->statStg_pci + offset, + &ICOM_PORT->dram->RcvStatusAddr); + ICOM_PORT->next_rcv = 0; + ICOM_PORT->put_length = 0; + *ICOM_PORT->xmitRestart = 0; + writel(ICOM_PORT->xmitRestart_pci, + &ICOM_PORT->dram->XmitStatusAddr); + trace(ICOM_PORT, "XR_ENAB", 0); + writeb(CMD_XMIT_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *icom_type(struct uart_port *port) +{ + return "icom"; +} + +static void icom_release_port(struct uart_port *port) +{ +} + +static int icom_request_port(struct uart_port *port) +{ + return 0; +} + +static void icom_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_ICOM; +} + +static struct uart_ops icom_ops = { + .tx_empty = icom_tx_empty, + .set_mctrl = icom_set_mctrl, + .get_mctrl = icom_get_mctrl, + .stop_tx = icom_stop_tx, + .start_tx = icom_start_tx, + .send_xchar = icom_send_xchar, + .stop_rx = icom_stop_rx, + .enable_ms = icom_enable_ms, + .break_ctl = icom_break, + .startup = icom_open, + .shutdown = icom_close, + .set_termios = icom_set_termios, + .type = icom_type, + .release_port = icom_release_port, + .request_port = icom_request_port, + .config_port = icom_config_port, +}; + +#define ICOM_CONSOLE NULL + +static struct uart_driver icom_uart_driver = { + .owner = THIS_MODULE, + .driver_name = ICOM_DRIVER_NAME, + .dev_name = "ttyA", + .major = ICOM_MAJOR, + .minor = ICOM_MINOR_START, + .nr = NR_PORTS, + .cons = ICOM_CONSOLE, +}; + +static int __devinit icom_init_ports(struct icom_adapter *icom_adapter) +{ + u32 subsystem_id = icom_adapter->subsystem_id; + int i; + struct icom_port *icom_port; + + if (icom_adapter->version == ADAPTER_V1) { + icom_adapter->numb_ports = 2; + + for (i = 0; i < 2; i++) { + icom_port = &icom_adapter->port_info[i]; + icom_port->port = i; + icom_port->status = ICOM_PORT_ACTIVE; + icom_port->imbed_modem = ICOM_UNKNOWN; + } + } else { + if (subsystem_id == PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL) { + icom_adapter->numb_ports = 4; + + for (i = 0; i < 4; i++) { + icom_port = &icom_adapter->port_info[i]; + + icom_port->port = i; + icom_port->status = ICOM_PORT_ACTIVE; + icom_port->imbed_modem = ICOM_IMBED_MODEM; + } + } else { + icom_adapter->numb_ports = 4; + + icom_adapter->port_info[0].port = 0; + icom_adapter->port_info[0].status = ICOM_PORT_ACTIVE; + + if (subsystem_id == + PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM) { + icom_adapter->port_info[0].imbed_modem = ICOM_IMBED_MODEM; + } else { + icom_adapter->port_info[0].imbed_modem = ICOM_RVX; + } + + icom_adapter->port_info[1].status = ICOM_PORT_OFF; + + icom_adapter->port_info[2].port = 2; + icom_adapter->port_info[2].status = ICOM_PORT_ACTIVE; + icom_adapter->port_info[2].imbed_modem = ICOM_RVX; + icom_adapter->port_info[3].status = ICOM_PORT_OFF; + } + } + + return 0; +} + +static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *icom_adapter, int port_num) +{ + if (icom_adapter->version == ADAPTER_V1) { + icom_port->global_reg = icom_adapter->base_addr + 0x4000; + icom_port->int_reg = icom_adapter->base_addr + + 0x4004 + 2 - 2 * port_num; + } else { + icom_port->global_reg = icom_adapter->base_addr + 0x8000; + if (icom_port->port < 2) + icom_port->int_reg = icom_adapter->base_addr + + 0x8004 + 2 - 2 * icom_port->port; + else + icom_port->int_reg = icom_adapter->base_addr + + 0x8024 + 2 - 2 * (icom_port->port - 2); + } +} +static int __devinit icom_load_ports(struct icom_adapter *icom_adapter) +{ + struct icom_port *icom_port; + int port_num; + + for (port_num = 0; port_num < icom_adapter->numb_ports; port_num++) { + + icom_port = &icom_adapter->port_info[port_num]; + + if (icom_port->status == ICOM_PORT_ACTIVE) { + icom_port_active(icom_port, icom_adapter, port_num); + icom_port->dram = icom_adapter->base_addr + + 0x2000 * icom_port->port; + + icom_port->adapter = icom_adapter; + + /* get port memory */ + if (get_port_memory(icom_port) != 0) { + dev_err(&icom_port->adapter->pci_dev->dev, + "Memory allocation for port FAILED\n"); + } + } + } + return 0; +} + +static int __devinit icom_alloc_adapter(struct icom_adapter + **icom_adapter_ref) +{ + int adapter_count = 0; + struct icom_adapter *icom_adapter; + struct icom_adapter *cur_adapter_entry; + struct list_head *tmp; + + icom_adapter = (struct icom_adapter *) + kzalloc(sizeof(struct icom_adapter), GFP_KERNEL); + + if (!icom_adapter) { + return -ENOMEM; + } + + list_for_each(tmp, &icom_adapter_head) { + cur_adapter_entry = + list_entry(tmp, struct icom_adapter, + icom_adapter_entry); + if (cur_adapter_entry->index != adapter_count) { + break; + } + adapter_count++; + } + + icom_adapter->index = adapter_count; + list_add_tail(&icom_adapter->icom_adapter_entry, tmp); + + *icom_adapter_ref = icom_adapter; + return 0; +} + +static void icom_free_adapter(struct icom_adapter *icom_adapter) +{ + list_del(&icom_adapter->icom_adapter_entry); + kfree(icom_adapter); +} + +static void icom_remove_adapter(struct icom_adapter *icom_adapter) +{ + struct icom_port *icom_port; + int index; + + for (index = 0; index < icom_adapter->numb_ports; index++) { + icom_port = &icom_adapter->port_info[index]; + + if (icom_port->status == ICOM_PORT_ACTIVE) { + dev_info(&icom_adapter->pci_dev->dev, + "Device removed\n"); + + uart_remove_one_port(&icom_uart_driver, + &icom_port->uart_port); + + /* be sure that DTR and RTS are dropped */ + writeb(0x00, &icom_port->dram->osr); + + /* Wait 0.1 Sec for simple Init to complete */ + msleep(100); + + /* Stop proccessor */ + stop_processor(icom_port); + + free_port_memory(icom_port); + } + } + + free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter); + iounmap(icom_adapter->base_addr); + pci_release_regions(icom_adapter->pci_dev); + icom_free_adapter(icom_adapter); +} + +static void icom_kref_release(struct kref *kref) +{ + struct icom_adapter *icom_adapter; + + icom_adapter = to_icom_adapter(kref); + icom_remove_adapter(icom_adapter); +} + +static int __devinit icom_probe(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + int index; + unsigned int command_reg; + int retval; + struct icom_adapter *icom_adapter; + struct icom_port *icom_port; + + retval = pci_enable_device(dev); + if (retval) { + dev_err(&dev->dev, "Device enable FAILED\n"); + return retval; + } + + if ( (retval = pci_request_regions(dev, "icom"))) { + dev_err(&dev->dev, "pci_request_regions FAILED\n"); + pci_disable_device(dev); + return retval; + } + + pci_set_master(dev); + + if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) { + dev_err(&dev->dev, "PCI Config read FAILED\n"); + return retval; + } + + pci_write_config_dword(dev, PCI_COMMAND, + command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER + | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); + + if (ent->driver_data == ADAPTER_V1) { + pci_write_config_dword(dev, 0x44, 0x8300830A); + } else { + pci_write_config_dword(dev, 0x44, 0x42004200); + pci_write_config_dword(dev, 0x48, 0x42004200); + } + + + retval = icom_alloc_adapter(&icom_adapter); + if (retval) { + dev_err(&dev->dev, "icom_alloc_adapter FAILED\n"); + retval = -EIO; + goto probe_exit0; + } + + icom_adapter->base_addr_pci = pci_resource_start(dev, 0); + icom_adapter->pci_dev = dev; + icom_adapter->version = ent->driver_data; + icom_adapter->subsystem_id = ent->subdevice; + + + retval = icom_init_ports(icom_adapter); + if (retval) { + dev_err(&dev->dev, "Port configuration failed\n"); + goto probe_exit1; + } + + icom_adapter->base_addr = pci_ioremap_bar(dev, 0); + + if (!icom_adapter->base_addr) + goto probe_exit1; + + /* save off irq and request irq line */ + if ( (retval = request_irq(dev->irq, icom_interrupt, + IRQF_DISABLED | IRQF_SHARED, ICOM_DRIVER_NAME, + (void *) icom_adapter))) { + goto probe_exit2; + } + + retval = icom_load_ports(icom_adapter); + + for (index = 0; index < icom_adapter->numb_ports; index++) { + icom_port = &icom_adapter->port_info[index]; + + if (icom_port->status == ICOM_PORT_ACTIVE) { + icom_port->uart_port.irq = icom_port->adapter->pci_dev->irq; + icom_port->uart_port.type = PORT_ICOM; + icom_port->uart_port.iotype = UPIO_MEM; + icom_port->uart_port.membase = + (char *) icom_adapter->base_addr_pci; + icom_port->uart_port.fifosize = 16; + icom_port->uart_port.ops = &icom_ops; + icom_port->uart_port.line = + icom_port->port + icom_adapter->index * 4; + if (uart_add_one_port (&icom_uart_driver, &icom_port->uart_port)) { + icom_port->status = ICOM_PORT_OFF; + dev_err(&dev->dev, "Device add failed\n"); + } else + dev_info(&dev->dev, "Device added\n"); + } + } + + kref_init(&icom_adapter->kref); + return 0; + +probe_exit2: + iounmap(icom_adapter->base_addr); +probe_exit1: + icom_free_adapter(icom_adapter); + +probe_exit0: + pci_release_regions(dev); + pci_disable_device(dev); + + return retval; +} + +static void __devexit icom_remove(struct pci_dev *dev) +{ + struct icom_adapter *icom_adapter; + struct list_head *tmp; + + list_for_each(tmp, &icom_adapter_head) { + icom_adapter = list_entry(tmp, struct icom_adapter, + icom_adapter_entry); + if (icom_adapter->pci_dev == dev) { + kref_put(&icom_adapter->kref, icom_kref_release); + return; + } + } + + dev_err(&dev->dev, "Unable to find device to remove\n"); +} + +static struct pci_driver icom_pci_driver = { + .name = ICOM_DRIVER_NAME, + .id_table = icom_pci_table, + .probe = icom_probe, + .remove = __devexit_p(icom_remove), +}; + +static int __init icom_init(void) +{ + int ret; + + spin_lock_init(&icom_lock); + + ret = uart_register_driver(&icom_uart_driver); + if (ret) + return ret; + + ret = pci_register_driver(&icom_pci_driver); + + if (ret < 0) + uart_unregister_driver(&icom_uart_driver); + + return ret; +} + +static void __exit icom_exit(void) +{ + pci_unregister_driver(&icom_pci_driver); + uart_unregister_driver(&icom_uart_driver); +} + +module_init(icom_init); +module_exit(icom_exit); + +MODULE_AUTHOR("Michael Anderson "); +MODULE_DESCRIPTION("IBM iSeries Serial IOA driver"); +MODULE_SUPPORTED_DEVICE + ("IBM iSeries 2745, 2771, 2772, 2742, 2793 and 2805 Communications adapters"); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("icom_call_setup.bin"); +MODULE_FIRMWARE("icom_res_dce.bin"); +MODULE_FIRMWARE("icom_asc.bin"); diff --git a/drivers/tty/serial/icom.h b/drivers/tty/serial/icom.h new file mode 100644 index 000000000000..c8029e0025c9 --- /dev/null +++ b/drivers/tty/serial/icom.h @@ -0,0 +1,287 @@ +/* + * icom.h + * + * Copyright (C) 2001 Michael Anderson, IBM Corporation + * + * Serial device driver include file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include + +#define BAUD_TABLE_LIMIT ((sizeof(icom_acfg_baud)/sizeof(int)) - 1) +static int icom_acfg_baud[] = { + 300, + 600, + 900, + 1200, + 1800, + 2400, + 3600, + 4800, + 7200, + 9600, + 14400, + 19200, + 28800, + 38400, + 57600, + 76800, + 115200, + 153600, + 230400, + 307200, + 460800, +}; + +struct icom_regs { + u32 control; /* Adapter Control Register */ + u32 interrupt; /* Adapter Interrupt Register */ + u32 int_mask; /* Adapter Interrupt Mask Reg */ + u32 int_pri; /* Adapter Interrupt Priority r */ + u32 int_reg_b; /* Adapter non-masked Interrupt */ + u32 resvd01; + u32 resvd02; + u32 resvd03; + u32 control_2; /* Adapter Control Register 2 */ + u32 interrupt_2; /* Adapter Interrupt Register 2 */ + u32 int_mask_2; /* Adapter Interrupt Mask 2 */ + u32 int_pri_2; /* Adapter Interrupt Prior 2 */ + u32 int_reg_2b; /* Adapter non-masked 2 */ +}; + +struct func_dram { + u32 reserved[108]; /* 0-1B0 reserved by personality code */ + u32 RcvStatusAddr; /* 1B0-1B3 Status Address for Next rcv */ + u8 RcvStnAddr; /* 1B4 Receive Station Addr */ + u8 IdleState; /* 1B5 Idle State */ + u8 IdleMonitor; /* 1B6 Idle Monitor */ + u8 FlagFillIdleTimer; /* 1B7 Flag Fill Idle Timer */ + u32 XmitStatusAddr; /* 1B8-1BB Transmit Status Address */ + u8 StartXmitCmd; /* 1BC Start Xmit Command */ + u8 HDLCConfigReg; /* 1BD Reserved */ + u8 CauseCode; /* 1BE Cause code for fatal error */ + u8 xchar; /* 1BF High priority send */ + u32 reserved3; /* 1C0-1C3 Reserved */ + u8 PrevCmdReg; /* 1C4 Reserved */ + u8 CmdReg; /* 1C5 Command Register */ + u8 async_config2; /* 1C6 Async Config Byte 2 */ + u8 async_config3; /* 1C7 Async Config Byte 3 */ + u8 dce_resvd[20]; /* 1C8-1DB DCE Rsvd */ + u8 dce_resvd21; /* 1DC DCE Rsvd (21st byte */ + u8 misc_flags; /* 1DD misc flags */ +#define V2_HARDWARE 0x40 +#define ICOM_HDW_ACTIVE 0x01 + u8 call_length; /* 1DE Phone #/CFI buff ln */ + u8 call_length2; /* 1DF Upper byte (unused) */ + u32 call_addr; /* 1E0-1E3 Phn #/CFI buff addr */ + u16 timer_value; /* 1E4-1E5 general timer value */ + u8 timer_command; /* 1E6 general timer cmd */ + u8 dce_command; /* 1E7 dce command reg */ + u8 dce_cmd_status; /* 1E8 dce command stat */ + u8 x21_r1_ioff; /* 1E9 dce ready counter */ + u8 x21_r0_ioff; /* 1EA dce not ready ctr */ + u8 x21_ralt_ioff; /* 1EB dce CNR counter */ + u8 x21_r1_ion; /* 1EC dce ready I on ctr */ + u8 rsvd_ier; /* 1ED Rsvd for IER (if ne */ + u8 ier; /* 1EE Interrupt Enable */ + u8 isr; /* 1EF Input Signal Reg */ + u8 osr; /* 1F0 Output Signal Reg */ + u8 reset; /* 1F1 Reset/Reload Reg */ + u8 disable; /* 1F2 Disable Reg */ + u8 sync; /* 1F3 Sync Reg */ + u8 error_stat; /* 1F4 Error Status */ + u8 cable_id; /* 1F5 Cable ID */ + u8 cs_length; /* 1F6 CS Load Length */ + u8 mac_length; /* 1F7 Mac Load Length */ + u32 cs_load_addr; /* 1F8-1FB Call Load PCI Addr */ + u32 mac_load_addr; /* 1FC-1FF Mac Load PCI Addr */ +}; + +/* + * adapter defines and structures + */ +#define ICOM_CONTROL_START_A 0x00000008 +#define ICOM_CONTROL_STOP_A 0x00000004 +#define ICOM_CONTROL_START_B 0x00000002 +#define ICOM_CONTROL_STOP_B 0x00000001 +#define ICOM_CONTROL_START_C 0x00000008 +#define ICOM_CONTROL_STOP_C 0x00000004 +#define ICOM_CONTROL_START_D 0x00000002 +#define ICOM_CONTROL_STOP_D 0x00000001 +#define ICOM_IRAM_OFFSET 0x1000 +#define ICOM_IRAM_SIZE 0x0C00 +#define ICOM_DCE_IRAM_OFFSET 0x0A00 +#define ICOM_CABLE_ID_VALID 0x01 +#define ICOM_CABLE_ID_MASK 0xF0 +#define ICOM_DISABLE 0x80 +#define CMD_XMIT_RCV_ENABLE 0xC0 +#define CMD_XMIT_ENABLE 0x40 +#define CMD_RCV_DISABLE 0x00 +#define CMD_RCV_ENABLE 0x80 +#define CMD_RESTART 0x01 +#define CMD_HOLD_XMIT 0x02 +#define CMD_SND_BREAK 0x04 +#define RS232_CABLE 0x06 +#define V24_CABLE 0x0E +#define V35_CABLE 0x0C +#define V36_CABLE 0x02 +#define NO_CABLE 0x00 +#define START_DOWNLOAD 0x80 +#define ICOM_INT_MASK_PRC_A 0x00003FFF +#define ICOM_INT_MASK_PRC_B 0x3FFF0000 +#define ICOM_INT_MASK_PRC_C 0x00003FFF +#define ICOM_INT_MASK_PRC_D 0x3FFF0000 +#define INT_RCV_COMPLETED 0x1000 +#define INT_XMIT_COMPLETED 0x2000 +#define INT_IDLE_DETECT 0x0800 +#define INT_RCV_DISABLED 0x0400 +#define INT_XMIT_DISABLED 0x0200 +#define INT_RCV_XMIT_SHUTDOWN 0x0100 +#define INT_FATAL_ERROR 0x0080 +#define INT_CABLE_PULL 0x0020 +#define INT_SIGNAL_CHANGE 0x0010 +#define HDLC_PPP_PURE_ASYNC 0x02 +#define HDLC_FF_FILL 0x00 +#define HDLC_HDW_FLOW 0x01 +#define START_XMIT 0x80 +#define ICOM_ACFG_DRIVE1 0x20 +#define ICOM_ACFG_NO_PARITY 0x00 +#define ICOM_ACFG_PARITY_ENAB 0x02 +#define ICOM_ACFG_PARITY_ODD 0x01 +#define ICOM_ACFG_8BPC 0x00 +#define ICOM_ACFG_7BPC 0x04 +#define ICOM_ACFG_6BPC 0x08 +#define ICOM_ACFG_5BPC 0x0C +#define ICOM_ACFG_1STOP_BIT 0x00 +#define ICOM_ACFG_2STOP_BIT 0x10 +#define ICOM_DTR 0x80 +#define ICOM_RTS 0x40 +#define ICOM_RI 0x08 +#define ICOM_DSR 0x80 +#define ICOM_DCD 0x20 +#define ICOM_CTS 0x40 + +#define NUM_XBUFFS 1 +#define NUM_RBUFFS 2 +#define RCV_BUFF_SZ 0x0200 +#define XMIT_BUFF_SZ 0x1000 +struct statusArea { + /**********************************************/ + /* Transmit Status Area */ + /**********************************************/ + struct xmit_status_area{ + u32 leNext; /* Next entry in Little Endian on Adapter */ + u32 leNextASD; + u32 leBuffer; /* Buffer for entry in LE for Adapter */ + u16 leLengthASD; + u16 leOffsetASD; + u16 leLength; /* Length of data in segment */ + u16 flags; +#define SA_FLAGS_DONE 0x0080 /* Done with Segment */ +#define SA_FLAGS_CONTINUED 0x8000 /* More Segments */ +#define SA_FLAGS_IDLE 0x4000 /* Mark IDLE after frm */ +#define SA_FLAGS_READY_TO_XMIT 0x0800 +#define SA_FLAGS_STAT_MASK 0x007F + } xmit[NUM_XBUFFS]; + + /**********************************************/ + /* Receive Status Area */ + /**********************************************/ + struct { + u32 leNext; /* Next entry in Little Endian on Adapter */ + u32 leNextASD; + u32 leBuffer; /* Buffer for entry in LE for Adapter */ + u16 WorkingLength; /* size of segment */ + u16 reserv01; + u16 leLength; /* Length of data in segment */ + u16 flags; +#define SA_FL_RCV_DONE 0x0010 /* Data ready */ +#define SA_FLAGS_OVERRUN 0x0040 +#define SA_FLAGS_PARITY_ERROR 0x0080 +#define SA_FLAGS_FRAME_ERROR 0x0001 +#define SA_FLAGS_FRAME_TRUNC 0x0002 +#define SA_FLAGS_BREAK_DET 0x0004 /* set conditionally by device driver, not hardware */ +#define SA_FLAGS_RCV_MASK 0xFFE6 + } rcv[NUM_RBUFFS]; +}; + +struct icom_adapter; + + +#define ICOM_MAJOR 243 +#define ICOM_MINOR_START 0 + +struct icom_port { + struct uart_port uart_port; + u8 imbed_modem; +#define ICOM_UNKNOWN 1 +#define ICOM_RVX 2 +#define ICOM_IMBED_MODEM 3 + unsigned char cable_id; + unsigned char read_status_mask; + unsigned char ignore_status_mask; + void __iomem * int_reg; + struct icom_regs __iomem *global_reg; + struct func_dram __iomem *dram; + int port; + struct statusArea *statStg; + dma_addr_t statStg_pci; + u32 *xmitRestart; + dma_addr_t xmitRestart_pci; + unsigned char *xmit_buf; + dma_addr_t xmit_buf_pci; + unsigned char *recv_buf; + dma_addr_t recv_buf_pci; + int next_rcv; + int put_length; + int status; +#define ICOM_PORT_ACTIVE 1 /* Port exists. */ +#define ICOM_PORT_OFF 0 /* Port does not exist. */ + int load_in_progress; + struct icom_adapter *adapter; +}; + +struct icom_adapter { + void __iomem * base_addr; + unsigned long base_addr_pci; + struct pci_dev *pci_dev; + struct icom_port port_info[4]; + int index; + int version; +#define ADAPTER_V1 0x0001 +#define ADAPTER_V2 0x0002 + u32 subsystem_id; +#define FOUR_PORT_MODEL 0x0252 +#define V2_TWO_PORTS_RVX 0x021A +#define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM 0x0251 + int numb_ports; + struct list_head icom_adapter_entry; + struct kref kref; +}; + +/* prototype */ +extern void iCom_sercons_init(void); + +struct lookup_proc_table { + u32 __iomem *global_control_reg; + unsigned long processor_id; +}; + +struct lookup_int_table { + u32 __iomem *global_int_mask; + unsigned long processor_id; +}; diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c new file mode 100644 index 000000000000..ab93763862d5 --- /dev/null +++ b/drivers/tty/serial/ifx6x60.c @@ -0,0 +1,1406 @@ +/**************************************************************************** + * + * Driver for the IFX 6x60 spi modem. + * + * Copyright (C) 2008 Option International + * Copyright (C) 2008 Filip Aben + * Denis Joseph Barrow + * Jan Dumon + * + * Copyright (C) 2009, 2010 Intel Corp + * Russ Gorby + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA + * + * Driver modified by Intel from Option gtm501l_spi.c + * + * Notes + * o The driver currently assumes a single device only. If you need to + * change this then look for saved_ifx_dev and add a device lookup + * o The driver is intended to be big-endian safe but has never been + * tested that way (no suitable hardware). There are a couple of FIXME + * notes by areas that may need addressing + * o Some of the GPIO naming/setup assumptions may need revisiting if + * you need to use this driver for another platform. + * + *****************************************************************************/ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ifx6x60.h" + +#define IFX_SPI_MORE_MASK 0x10 +#define IFX_SPI_MORE_BIT 12 /* bit position in u16 */ +#define IFX_SPI_CTS_BIT 13 /* bit position in u16 */ +#define IFX_SPI_TTY_ID 0 +#define IFX_SPI_TIMEOUT_SEC 2 +#define IFX_SPI_HEADER_0 (-1) +#define IFX_SPI_HEADER_F (-2) + +/* forward reference */ +static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev); + +/* local variables */ +static int spi_b16 = 1; /* 8 or 16 bit word length */ +static struct tty_driver *tty_drv; +static struct ifx_spi_device *saved_ifx_dev; +static struct lock_class_key ifx_spi_key; + +/* GPIO/GPE settings */ + +/** + * mrdy_set_high - set MRDY GPIO + * @ifx: device we are controlling + * + */ +static inline void mrdy_set_high(struct ifx_spi_device *ifx) +{ + gpio_set_value(ifx->gpio.mrdy, 1); +} + +/** + * mrdy_set_low - clear MRDY GPIO + * @ifx: device we are controlling + * + */ +static inline void mrdy_set_low(struct ifx_spi_device *ifx) +{ + gpio_set_value(ifx->gpio.mrdy, 0); +} + +/** + * ifx_spi_power_state_set + * @ifx_dev: our SPI device + * @val: bits to set + * + * Set bit in power status and signal power system if status becomes non-0 + */ +static void +ifx_spi_power_state_set(struct ifx_spi_device *ifx_dev, unsigned char val) +{ + unsigned long flags; + + spin_lock_irqsave(&ifx_dev->power_lock, flags); + + /* + * if power status is already non-0, just update, else + * tell power system + */ + if (!ifx_dev->power_status) + pm_runtime_get(&ifx_dev->spi_dev->dev); + ifx_dev->power_status |= val; + + spin_unlock_irqrestore(&ifx_dev->power_lock, flags); +} + +/** + * ifx_spi_power_state_clear - clear power bit + * @ifx_dev: our SPI device + * @val: bits to clear + * + * clear bit in power status and signal power system if status becomes 0 + */ +static void +ifx_spi_power_state_clear(struct ifx_spi_device *ifx_dev, unsigned char val) +{ + unsigned long flags; + + spin_lock_irqsave(&ifx_dev->power_lock, flags); + + if (ifx_dev->power_status) { + ifx_dev->power_status &= ~val; + if (!ifx_dev->power_status) + pm_runtime_put(&ifx_dev->spi_dev->dev); + } + + spin_unlock_irqrestore(&ifx_dev->power_lock, flags); +} + +/** + * swap_buf + * @buf: our buffer + * @len : number of bytes (not words) in the buffer + * @end: end of buffer + * + * Swap the contents of a buffer into big endian format + */ +static inline void swap_buf(u16 *buf, int len, void *end) +{ + int n; + + len = ((len + 1) >> 1); + if ((void *)&buf[len] > end) { + pr_err("swap_buf: swap exceeds boundary (%p > %p)!", + &buf[len], end); + return; + } + for (n = 0; n < len; n++) { + *buf = cpu_to_be16(*buf); + buf++; + } +} + +/** + * mrdy_assert - assert MRDY line + * @ifx_dev: our SPI device + * + * Assert mrdy and set timer to wait for SRDY interrupt, if SRDY is low + * now. + * + * FIXME: Can SRDY even go high as we are running this code ? + */ +static void mrdy_assert(struct ifx_spi_device *ifx_dev) +{ + int val = gpio_get_value(ifx_dev->gpio.srdy); + if (!val) { + if (!test_and_set_bit(IFX_SPI_STATE_TIMER_PENDING, + &ifx_dev->flags)) { + ifx_dev->spi_timer.expires = + jiffies + IFX_SPI_TIMEOUT_SEC*HZ; + add_timer(&ifx_dev->spi_timer); + + } + } + ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_DATA_PENDING); + mrdy_set_high(ifx_dev); +} + +/** + * ifx_spi_hangup - hang up an IFX device + * @ifx_dev: our SPI device + * + * Hang up the tty attached to the IFX device if one is currently + * open. If not take no action + */ +static void ifx_spi_ttyhangup(struct ifx_spi_device *ifx_dev) +{ + struct tty_port *pport = &ifx_dev->tty_port; + struct tty_struct *tty = tty_port_tty_get(pport); + if (tty) { + tty_hangup(tty); + tty_kref_put(tty); + } +} + +/** + * ifx_spi_timeout - SPI timeout + * @arg: our SPI device + * + * The SPI has timed out: hang up the tty. Users will then see a hangup + * and error events. + */ +static void ifx_spi_timeout(unsigned long arg) +{ + struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *)arg; + + dev_warn(&ifx_dev->spi_dev->dev, "*** SPI Timeout ***"); + ifx_spi_ttyhangup(ifx_dev); + mrdy_set_low(ifx_dev); + clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); +} + +/* char/tty operations */ + +/** + * ifx_spi_tiocmget - get modem lines + * @tty: our tty device + * @filp: file handle issuing the request + * + * Map the signal state into Linux modem flags and report the value + * in Linux terms + */ +static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp) +{ + unsigned int value; + struct ifx_spi_device *ifx_dev = tty->driver_data; + + value = + (test_bit(IFX_SPI_RTS, &ifx_dev->signal_state) ? TIOCM_RTS : 0) | + (test_bit(IFX_SPI_DTR, &ifx_dev->signal_state) ? TIOCM_DTR : 0) | + (test_bit(IFX_SPI_CTS, &ifx_dev->signal_state) ? TIOCM_CTS : 0) | + (test_bit(IFX_SPI_DSR, &ifx_dev->signal_state) ? TIOCM_DSR : 0) | + (test_bit(IFX_SPI_DCD, &ifx_dev->signal_state) ? TIOCM_CAR : 0) | + (test_bit(IFX_SPI_RI, &ifx_dev->signal_state) ? TIOCM_RNG : 0); + return value; +} + +/** + * ifx_spi_tiocmset - set modem bits + * @tty: the tty structure + * @filp: file handle issuing the request + * @set: bits to set + * @clear: bits to clear + * + * The IFX6x60 only supports DTR and RTS. Set them accordingly + * and flag that an update to the modem is needed. + * + * FIXME: do we need to kick the tranfers when we do this ? + */ +static int ifx_spi_tiocmset(struct tty_struct *tty, struct file *filp, + unsigned int set, unsigned int clear) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + + if (set & TIOCM_RTS) + set_bit(IFX_SPI_RTS, &ifx_dev->signal_state); + if (set & TIOCM_DTR) + set_bit(IFX_SPI_DTR, &ifx_dev->signal_state); + if (clear & TIOCM_RTS) + clear_bit(IFX_SPI_RTS, &ifx_dev->signal_state); + if (clear & TIOCM_DTR) + clear_bit(IFX_SPI_DTR, &ifx_dev->signal_state); + + set_bit(IFX_SPI_UPDATE, &ifx_dev->signal_state); + return 0; +} + +/** + * ifx_spi_open - called on tty open + * @tty: our tty device + * @filp: file handle being associated with the tty + * + * Open the tty interface. We let the tty_port layer do all the work + * for us. + * + * FIXME: Remove single device assumption and saved_ifx_dev + */ +static int ifx_spi_open(struct tty_struct *tty, struct file *filp) +{ + return tty_port_open(&saved_ifx_dev->tty_port, tty, filp); +} + +/** + * ifx_spi_close - called when our tty closes + * @tty: the tty being closed + * @filp: the file handle being closed + * + * Perform the close of the tty. We use the tty_port layer to do all + * our hard work. + */ +static void ifx_spi_close(struct tty_struct *tty, struct file *filp) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + tty_port_close(&ifx_dev->tty_port, tty, filp); + /* FIXME: should we do an ifx_spi_reset here ? */ +} + +/** + * ifx_decode_spi_header - decode received header + * @buffer: the received data + * @length: decoded length + * @more: decoded more flag + * @received_cts: status of cts we received + * + * Note how received_cts is handled -- if header is all F it is left + * the same as it was, if header is all 0 it is set to 0 otherwise it is + * taken from the incoming header. + * + * FIXME: endianness + */ +static int ifx_spi_decode_spi_header(unsigned char *buffer, int *length, + unsigned char *more, unsigned char *received_cts) +{ + u16 h1; + u16 h2; + u16 *in_buffer = (u16 *)buffer; + + h1 = *in_buffer; + h2 = *(in_buffer+1); + + if (h1 == 0 && h2 == 0) { + *received_cts = 0; + return IFX_SPI_HEADER_0; + } else if (h1 == 0xffff && h2 == 0xffff) { + /* spi_slave_cts remains as it was */ + return IFX_SPI_HEADER_F; + } + + *length = h1 & 0xfff; /* upper bits of byte are flags */ + *more = (buffer[1] >> IFX_SPI_MORE_BIT) & 1; + *received_cts = (buffer[3] >> IFX_SPI_CTS_BIT) & 1; + return 0; +} + +/** + * ifx_setup_spi_header - set header fields + * @txbuffer: pointer to start of SPI buffer + * @tx_count: bytes + * @more: indicate if more to follow + * + * Format up an SPI header for a transfer + * + * FIXME: endianness? + */ +static void ifx_spi_setup_spi_header(unsigned char *txbuffer, int tx_count, + unsigned char more) +{ + *(u16 *)(txbuffer) = tx_count; + *(u16 *)(txbuffer+2) = IFX_SPI_PAYLOAD_SIZE; + txbuffer[1] |= (more << IFX_SPI_MORE_BIT) & IFX_SPI_MORE_MASK; +} + +/** + * ifx_spi_wakeup_serial - SPI space made + * @port_data: our SPI device + * + * We have emptied the FIFO enough that we want to get more data + * queued into it. Poke the line discipline via tty_wakeup so that + * it will feed us more bits + */ +static void ifx_spi_wakeup_serial(struct ifx_spi_device *ifx_dev) +{ + struct tty_struct *tty; + + tty = tty_port_tty_get(&ifx_dev->tty_port); + if (!tty) + return; + tty_wakeup(tty); + tty_kref_put(tty); +} + +/** + * ifx_spi_prepare_tx_buffer - prepare transmit frame + * @ifx_dev: our SPI device + * + * The transmit buffr needs a header and various other bits of + * information followed by as much data as we can pull from the FIFO + * and transfer. This function formats up a suitable buffer in the + * ifx_dev->tx_buffer + * + * FIXME: performance - should we wake the tty when the queue is half + * empty ? + */ +static int ifx_spi_prepare_tx_buffer(struct ifx_spi_device *ifx_dev) +{ + int temp_count; + int queue_length; + int tx_count; + unsigned char *tx_buffer; + + tx_buffer = ifx_dev->tx_buffer; + memset(tx_buffer, 0, IFX_SPI_TRANSFER_SIZE); + + /* make room for required SPI header */ + tx_buffer += IFX_SPI_HEADER_OVERHEAD; + tx_count = IFX_SPI_HEADER_OVERHEAD; + + /* clear to signal no more data if this turns out to be the + * last buffer sent in a sequence */ + ifx_dev->spi_more = 0; + + /* if modem cts is set, just send empty buffer */ + if (!ifx_dev->spi_slave_cts) { + /* see if there's tx data */ + queue_length = kfifo_len(&ifx_dev->tx_fifo); + if (queue_length != 0) { + /* data to mux -- see if there's room for it */ + temp_count = min(queue_length, IFX_SPI_PAYLOAD_SIZE); + temp_count = kfifo_out_locked(&ifx_dev->tx_fifo, + tx_buffer, temp_count, + &ifx_dev->fifo_lock); + + /* update buffer pointer and data count in message */ + tx_buffer += temp_count; + tx_count += temp_count; + if (temp_count == queue_length) + /* poke port to get more data */ + ifx_spi_wakeup_serial(ifx_dev); + else /* more data in port, use next SPI message */ + ifx_dev->spi_more = 1; + } + } + /* have data and info for header -- set up SPI header in buffer */ + /* spi header needs payload size, not entire buffer size */ + ifx_spi_setup_spi_header(ifx_dev->tx_buffer, + tx_count-IFX_SPI_HEADER_OVERHEAD, + ifx_dev->spi_more); + /* swap actual data in the buffer */ + swap_buf((u16 *)(ifx_dev->tx_buffer), tx_count, + &ifx_dev->tx_buffer[IFX_SPI_TRANSFER_SIZE]); + return tx_count; +} + +/** + * ifx_spi_write - line discipline write + * @tty: our tty device + * @buf: pointer to buffer to write (kernel space) + * @count: size of buffer + * + * Write the characters we have been given into the FIFO. If the device + * is not active then activate it, when the SRDY line is asserted back + * this will commence I/O + */ +static int ifx_spi_write(struct tty_struct *tty, const unsigned char *buf, + int count) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + unsigned char *tmp_buf = (unsigned char *)buf; + int tx_count = kfifo_in_locked(&ifx_dev->tx_fifo, tmp_buf, count, + &ifx_dev->fifo_lock); + mrdy_assert(ifx_dev); + return tx_count; +} + +/** + * ifx_spi_chars_in_buffer - line discipline helper + * @tty: our tty device + * + * Report how much data we can accept before we drop bytes. As we use + * a simple FIFO this is nice and easy. + */ +static int ifx_spi_write_room(struct tty_struct *tty) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + return IFX_SPI_FIFO_SIZE - kfifo_len(&ifx_dev->tx_fifo); +} + +/** + * ifx_spi_chars_in_buffer - line discipline helper + * @tty: our tty device + * + * Report how many characters we have buffered. In our case this is the + * number of bytes sitting in our transmit FIFO. + */ +static int ifx_spi_chars_in_buffer(struct tty_struct *tty) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + return kfifo_len(&ifx_dev->tx_fifo); +} + +/** + * ifx_port_hangup + * @port: our tty port + * + * tty port hang up. Called when tty_hangup processing is invoked either + * by loss of carrier, or by software (eg vhangup). Serialized against + * activate/shutdown by the tty layer. + */ +static void ifx_spi_hangup(struct tty_struct *tty) +{ + struct ifx_spi_device *ifx_dev = tty->driver_data; + tty_port_hangup(&ifx_dev->tty_port); +} + +/** + * ifx_port_activate + * @port: our tty port + * + * tty port activate method - called for first open. Serialized + * with hangup and shutdown by the tty layer. + */ +static int ifx_port_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct ifx_spi_device *ifx_dev = + container_of(port, struct ifx_spi_device, tty_port); + + /* clear any old data; can't do this in 'close' */ + kfifo_reset(&ifx_dev->tx_fifo); + + /* put port data into this tty */ + tty->driver_data = ifx_dev; + + /* allows flip string push from int context */ + tty->low_latency = 1; + + return 0; +} + +/** + * ifx_port_shutdown + * @port: our tty port + * + * tty port shutdown method - called for last port close. Serialized + * with hangup and activate by the tty layer. + */ +static void ifx_port_shutdown(struct tty_port *port) +{ + struct ifx_spi_device *ifx_dev = + container_of(port, struct ifx_spi_device, tty_port); + + mrdy_set_low(ifx_dev); + clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); + tasklet_kill(&ifx_dev->io_work_tasklet); +} + +static const struct tty_port_operations ifx_tty_port_ops = { + .activate = ifx_port_activate, + .shutdown = ifx_port_shutdown, +}; + +static const struct tty_operations ifx_spi_serial_ops = { + .open = ifx_spi_open, + .close = ifx_spi_close, + .write = ifx_spi_write, + .hangup = ifx_spi_hangup, + .write_room = ifx_spi_write_room, + .chars_in_buffer = ifx_spi_chars_in_buffer, + .tiocmget = ifx_spi_tiocmget, + .tiocmset = ifx_spi_tiocmset, +}; + +/** + * ifx_spi_insert_fip_string - queue received data + * @ifx_ser: our SPI device + * @chars: buffer we have received + * @size: number of chars reeived + * + * Queue bytes to the tty assuming the tty side is currently open. If + * not the discard the data. + */ +static void ifx_spi_insert_flip_string(struct ifx_spi_device *ifx_dev, + unsigned char *chars, size_t size) +{ + struct tty_struct *tty = tty_port_tty_get(&ifx_dev->tty_port); + if (!tty) + return; + tty_insert_flip_string(tty, chars, size); + tty_flip_buffer_push(tty); + tty_kref_put(tty); +} + +/** + * ifx_spi_complete - SPI transfer completed + * @ctx: our SPI device + * + * An SPI transfer has completed. Process any received data and kick off + * any further transmits we can commence. + */ +static void ifx_spi_complete(void *ctx) +{ + struct ifx_spi_device *ifx_dev = ctx; + struct tty_struct *tty; + struct tty_ldisc *ldisc = NULL; + int length; + int actual_length; + unsigned char more; + unsigned char cts; + int local_write_pending = 0; + int queue_length; + int srdy; + int decode_result; + + mrdy_set_low(ifx_dev); + + if (!ifx_dev->spi_msg.status) { + /* check header validity, get comm flags */ + swap_buf((u16 *)ifx_dev->rx_buffer, IFX_SPI_HEADER_OVERHEAD, + &ifx_dev->rx_buffer[IFX_SPI_HEADER_OVERHEAD]); + decode_result = ifx_spi_decode_spi_header(ifx_dev->rx_buffer, + &length, &more, &cts); + if (decode_result == IFX_SPI_HEADER_0) { + dev_dbg(&ifx_dev->spi_dev->dev, + "ignore input: invalid header 0"); + ifx_dev->spi_slave_cts = 0; + goto complete_exit; + } else if (decode_result == IFX_SPI_HEADER_F) { + dev_dbg(&ifx_dev->spi_dev->dev, + "ignore input: invalid header F"); + goto complete_exit; + } + + ifx_dev->spi_slave_cts = cts; + + actual_length = min((unsigned int)length, + ifx_dev->spi_msg.actual_length); + swap_buf((u16 *)(ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD), + actual_length, + &ifx_dev->rx_buffer[IFX_SPI_TRANSFER_SIZE]); + ifx_spi_insert_flip_string( + ifx_dev, + ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD, + (size_t)actual_length); + } else { + dev_dbg(&ifx_dev->spi_dev->dev, "SPI transfer error %d", + ifx_dev->spi_msg.status); + } + +complete_exit: + if (ifx_dev->write_pending) { + ifx_dev->write_pending = 0; + local_write_pending = 1; + } + + clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &(ifx_dev->flags)); + + queue_length = kfifo_len(&ifx_dev->tx_fifo); + srdy = gpio_get_value(ifx_dev->gpio.srdy); + if (!srdy) + ifx_spi_power_state_clear(ifx_dev, IFX_SPI_POWER_SRDY); + + /* schedule output if there is more to do */ + if (test_and_clear_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags)) + tasklet_schedule(&ifx_dev->io_work_tasklet); + else { + if (more || ifx_dev->spi_more || queue_length > 0 || + local_write_pending) { + if (ifx_dev->spi_slave_cts) { + if (more) + mrdy_assert(ifx_dev); + } else + mrdy_assert(ifx_dev); + } else { + /* + * poke line discipline driver if any for more data + * may or may not get more data to write + * for now, say not busy + */ + ifx_spi_power_state_clear(ifx_dev, + IFX_SPI_POWER_DATA_PENDING); + tty = tty_port_tty_get(&ifx_dev->tty_port); + if (tty) { + ldisc = tty_ldisc_ref(tty); + if (ldisc) { + ldisc->ops->write_wakeup(tty); + tty_ldisc_deref(ldisc); + } + tty_kref_put(tty); + } + } + } +} + +/** + * ifx_spio_io - I/O tasklet + * @data: our SPI device + * + * Queue data for transmission if possible and then kick off the + * transfer. + */ +static void ifx_spi_io(unsigned long data) +{ + int retval; + struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *) data; + + if (!test_and_set_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) { + if (ifx_dev->gpio.unack_srdy_int_nb > 0) + ifx_dev->gpio.unack_srdy_int_nb--; + + ifx_spi_prepare_tx_buffer(ifx_dev); + + spi_message_init(&ifx_dev->spi_msg); + INIT_LIST_HEAD(&ifx_dev->spi_msg.queue); + + ifx_dev->spi_msg.context = ifx_dev; + ifx_dev->spi_msg.complete = ifx_spi_complete; + + /* set up our spi transfer */ + /* note len is BYTES, not transfers */ + ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE; + ifx_dev->spi_xfer.cs_change = 0; + ifx_dev->spi_xfer.speed_hz = 12500000; + /* ifx_dev->spi_xfer.speed_hz = 390625; */ + ifx_dev->spi_xfer.bits_per_word = spi_b16 ? 16 : 8; + + ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer; + ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer; + + /* + * setup dma pointers + */ + if (ifx_dev->is_6160) { + ifx_dev->spi_msg.is_dma_mapped = 1; + ifx_dev->tx_dma = ifx_dev->tx_bus; + ifx_dev->rx_dma = ifx_dev->rx_bus; + ifx_dev->spi_xfer.tx_dma = ifx_dev->tx_dma; + ifx_dev->spi_xfer.rx_dma = ifx_dev->rx_dma; + } else { + ifx_dev->spi_msg.is_dma_mapped = 0; + ifx_dev->tx_dma = (dma_addr_t)0; + ifx_dev->rx_dma = (dma_addr_t)0; + ifx_dev->spi_xfer.tx_dma = (dma_addr_t)0; + ifx_dev->spi_xfer.rx_dma = (dma_addr_t)0; + } + + spi_message_add_tail(&ifx_dev->spi_xfer, &ifx_dev->spi_msg); + + /* Assert MRDY. This may have already been done by the write + * routine. + */ + mrdy_assert(ifx_dev); + + retval = spi_async(ifx_dev->spi_dev, &ifx_dev->spi_msg); + if (retval) { + clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, + &ifx_dev->flags); + tasklet_schedule(&ifx_dev->io_work_tasklet); + return; + } + } else + ifx_dev->write_pending = 1; +} + +/** + * ifx_spi_free_port - free up the tty side + * @ifx_dev: IFX device going away + * + * Unregister and free up a port when the device goes away + */ +static void ifx_spi_free_port(struct ifx_spi_device *ifx_dev) +{ + if (ifx_dev->tty_dev) + tty_unregister_device(tty_drv, ifx_dev->minor); + kfifo_free(&ifx_dev->tx_fifo); +} + +/** + * ifx_spi_create_port - create a new port + * @ifx_dev: our spi device + * + * Allocate and initialise the tty port that goes with this interface + * and add it to the tty layer so that it can be opened. + */ +static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev) +{ + int ret = 0; + struct tty_port *pport = &ifx_dev->tty_port; + + spin_lock_init(&ifx_dev->fifo_lock); + lockdep_set_class_and_subclass(&ifx_dev->fifo_lock, + &ifx_spi_key, 0); + + if (kfifo_alloc(&ifx_dev->tx_fifo, IFX_SPI_FIFO_SIZE, GFP_KERNEL)) { + ret = -ENOMEM; + goto error_ret; + } + + pport->ops = &ifx_tty_port_ops; + tty_port_init(pport); + ifx_dev->minor = IFX_SPI_TTY_ID; + ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor, + &ifx_dev->spi_dev->dev); + if (IS_ERR(ifx_dev->tty_dev)) { + dev_dbg(&ifx_dev->spi_dev->dev, + "%s: registering tty device failed", __func__); + ret = PTR_ERR(ifx_dev->tty_dev); + goto error_ret; + } + return 0; + +error_ret: + ifx_spi_free_port(ifx_dev); + return ret; +} + +/** + * ifx_spi_handle_srdy - handle SRDY + * @ifx_dev: device asserting SRDY + * + * Check our device state and see what we need to kick off when SRDY + * is asserted. This usually means killing the timer and firing off the + * I/O processing. + */ +static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev) +{ + if (test_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags)) { + del_timer_sync(&ifx_dev->spi_timer); + clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags); + } + + ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_SRDY); + + if (!test_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) + tasklet_schedule(&ifx_dev->io_work_tasklet); + else + set_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags); +} + +/** + * ifx_spi_srdy_interrupt - SRDY asserted + * @irq: our IRQ number + * @dev: our ifx device + * + * The modem asserted SRDY. Handle the srdy event + */ +static irqreturn_t ifx_spi_srdy_interrupt(int irq, void *dev) +{ + struct ifx_spi_device *ifx_dev = dev; + ifx_dev->gpio.unack_srdy_int_nb++; + ifx_spi_handle_srdy(ifx_dev); + return IRQ_HANDLED; +} + +/** + * ifx_spi_reset_interrupt - Modem has changed reset state + * @irq: interrupt number + * @dev: our device pointer + * + * The modem has either entered or left reset state. Check the GPIO + * line to see which. + * + * FIXME: review locking on MR_INPROGRESS versus + * parallel unsolicited reset/solicited reset + */ +static irqreturn_t ifx_spi_reset_interrupt(int irq, void *dev) +{ + struct ifx_spi_device *ifx_dev = dev; + int val = gpio_get_value(ifx_dev->gpio.reset_out); + int solreset = test_bit(MR_START, &ifx_dev->mdm_reset_state); + + if (val == 0) { + /* entered reset */ + set_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state); + if (!solreset) { + /* unsolicited reset */ + ifx_spi_ttyhangup(ifx_dev); + } + } else { + /* exited reset */ + clear_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state); + if (solreset) { + set_bit(MR_COMPLETE, &ifx_dev->mdm_reset_state); + wake_up(&ifx_dev->mdm_reset_wait); + } + } + return IRQ_HANDLED; +} + +/** + * ifx_spi_free_device - free device + * @ifx_dev: device to free + * + * Free the IFX device + */ +static void ifx_spi_free_device(struct ifx_spi_device *ifx_dev) +{ + ifx_spi_free_port(ifx_dev); + dma_free_coherent(&ifx_dev->spi_dev->dev, + IFX_SPI_TRANSFER_SIZE, + ifx_dev->tx_buffer, + ifx_dev->tx_bus); + dma_free_coherent(&ifx_dev->spi_dev->dev, + IFX_SPI_TRANSFER_SIZE, + ifx_dev->rx_buffer, + ifx_dev->rx_bus); +} + +/** + * ifx_spi_reset - reset modem + * @ifx_dev: modem to reset + * + * Perform a reset on the modem + */ +static int ifx_spi_reset(struct ifx_spi_device *ifx_dev) +{ + int ret; + /* + * set up modem power, reset + * + * delays are required on some platforms for the modem + * to reset properly + */ + set_bit(MR_START, &ifx_dev->mdm_reset_state); + gpio_set_value(ifx_dev->gpio.po, 0); + gpio_set_value(ifx_dev->gpio.reset, 0); + msleep(25); + gpio_set_value(ifx_dev->gpio.reset, 1); + msleep(1); + gpio_set_value(ifx_dev->gpio.po, 1); + msleep(1); + gpio_set_value(ifx_dev->gpio.po, 0); + ret = wait_event_timeout(ifx_dev->mdm_reset_wait, + test_bit(MR_COMPLETE, + &ifx_dev->mdm_reset_state), + IFX_RESET_TIMEOUT); + if (!ret) + dev_warn(&ifx_dev->spi_dev->dev, "Modem reset timeout: (state:%lx)", + ifx_dev->mdm_reset_state); + + ifx_dev->mdm_reset_state = 0; + return ret; +} + +/** + * ifx_spi_spi_probe - probe callback + * @spi: our possible matching SPI device + * + * Probe for a 6x60 modem on SPI bus. Perform any needed device and + * GPIO setup. + * + * FIXME: + * - Support for multiple devices + * - Split out MID specific GPIO handling eventually + */ + +static int ifx_spi_spi_probe(struct spi_device *spi) +{ + int ret; + int srdy; + struct ifx_modem_platform_data *pl_data = NULL; + struct ifx_spi_device *ifx_dev; + + if (saved_ifx_dev) { + dev_dbg(&spi->dev, "ignoring subsequent detection"); + return -ENODEV; + } + + /* initialize structure to hold our device variables */ + ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL); + if (!ifx_dev) { + dev_err(&spi->dev, "spi device allocation failed"); + return -ENOMEM; + } + saved_ifx_dev = ifx_dev; + ifx_dev->spi_dev = spi; + clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags); + spin_lock_init(&ifx_dev->write_lock); + spin_lock_init(&ifx_dev->power_lock); + ifx_dev->power_status = 0; + init_timer(&ifx_dev->spi_timer); + ifx_dev->spi_timer.function = ifx_spi_timeout; + ifx_dev->spi_timer.data = (unsigned long)ifx_dev; + ifx_dev->is_6160 = pl_data->is_6160; + + /* ensure SPI protocol flags are initialized to enable transfer */ + ifx_dev->spi_more = 0; + ifx_dev->spi_slave_cts = 0; + + /*initialize transfer and dma buffers */ + ifx_dev->tx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev, + IFX_SPI_TRANSFER_SIZE, + &ifx_dev->tx_bus, + GFP_KERNEL); + if (!ifx_dev->tx_buffer) { + dev_err(&spi->dev, "DMA-TX buffer allocation failed"); + ret = -ENOMEM; + goto error_ret; + } + ifx_dev->rx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev, + IFX_SPI_TRANSFER_SIZE, + &ifx_dev->rx_bus, + GFP_KERNEL); + if (!ifx_dev->rx_buffer) { + dev_err(&spi->dev, "DMA-RX buffer allocation failed"); + ret = -ENOMEM; + goto error_ret; + } + + /* initialize waitq for modem reset */ + init_waitqueue_head(&ifx_dev->mdm_reset_wait); + + spi_set_drvdata(spi, ifx_dev); + tasklet_init(&ifx_dev->io_work_tasklet, ifx_spi_io, + (unsigned long)ifx_dev); + + set_bit(IFX_SPI_STATE_PRESENT, &ifx_dev->flags); + + /* create our tty port */ + ret = ifx_spi_create_port(ifx_dev); + if (ret != 0) { + dev_err(&spi->dev, "create default tty port failed"); + goto error_ret; + } + + pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data; + if (pl_data) { + ifx_dev->gpio.reset = pl_data->rst_pmu; + ifx_dev->gpio.po = pl_data->pwr_on; + ifx_dev->gpio.mrdy = pl_data->mrdy; + ifx_dev->gpio.srdy = pl_data->srdy; + ifx_dev->gpio.reset_out = pl_data->rst_out; + } else { + dev_err(&spi->dev, "missing platform data!"); + ret = -ENODEV; + goto error_ret; + } + + dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d", + ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy, + ifx_dev->gpio.srdy, ifx_dev->gpio.reset_out); + + /* Configure gpios */ + ret = gpio_request(ifx_dev->gpio.reset, "ifxModem"); + if (ret < 0) { + dev_err(&spi->dev, "Unable to allocate GPIO%d (RESET)", + ifx_dev->gpio.reset); + goto error_ret; + } + ret += gpio_direction_output(ifx_dev->gpio.reset, 0); + ret += gpio_export(ifx_dev->gpio.reset, 1); + if (ret) { + dev_err(&spi->dev, "Unable to configure GPIO%d (RESET)", + ifx_dev->gpio.reset); + ret = -EBUSY; + goto error_ret2; + } + + ret = gpio_request(ifx_dev->gpio.po, "ifxModem"); + ret += gpio_direction_output(ifx_dev->gpio.po, 0); + ret += gpio_export(ifx_dev->gpio.po, 1); + if (ret) { + dev_err(&spi->dev, "Unable to configure GPIO%d (ON)", + ifx_dev->gpio.po); + ret = -EBUSY; + goto error_ret3; + } + + ret = gpio_request(ifx_dev->gpio.mrdy, "ifxModem"); + if (ret < 0) { + dev_err(&spi->dev, "Unable to allocate GPIO%d (MRDY)", + ifx_dev->gpio.mrdy); + goto error_ret3; + } + ret += gpio_export(ifx_dev->gpio.mrdy, 1); + ret += gpio_direction_output(ifx_dev->gpio.mrdy, 0); + if (ret) { + dev_err(&spi->dev, "Unable to configure GPIO%d (MRDY)", + ifx_dev->gpio.mrdy); + ret = -EBUSY; + goto error_ret4; + } + + ret = gpio_request(ifx_dev->gpio.srdy, "ifxModem"); + if (ret < 0) { + dev_err(&spi->dev, "Unable to allocate GPIO%d (SRDY)", + ifx_dev->gpio.srdy); + ret = -EBUSY; + goto error_ret4; + } + ret += gpio_export(ifx_dev->gpio.srdy, 1); + ret += gpio_direction_input(ifx_dev->gpio.srdy); + if (ret) { + dev_err(&spi->dev, "Unable to configure GPIO%d (SRDY)", + ifx_dev->gpio.srdy); + ret = -EBUSY; + goto error_ret5; + } + + ret = gpio_request(ifx_dev->gpio.reset_out, "ifxModem"); + if (ret < 0) { + dev_err(&spi->dev, "Unable to allocate GPIO%d (RESET_OUT)", + ifx_dev->gpio.reset_out); + goto error_ret5; + } + ret += gpio_export(ifx_dev->gpio.reset_out, 1); + ret += gpio_direction_input(ifx_dev->gpio.reset_out); + if (ret) { + dev_err(&spi->dev, "Unable to configure GPIO%d (RESET_OUT)", + ifx_dev->gpio.reset_out); + ret = -EBUSY; + goto error_ret6; + } + + ret = request_irq(gpio_to_irq(ifx_dev->gpio.reset_out), + ifx_spi_reset_interrupt, + IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, DRVNAME, + (void *)ifx_dev); + if (ret) { + dev_err(&spi->dev, "Unable to get irq %x\n", + gpio_to_irq(ifx_dev->gpio.reset_out)); + goto error_ret6; + } + + ret = ifx_spi_reset(ifx_dev); + + ret = request_irq(gpio_to_irq(ifx_dev->gpio.srdy), + ifx_spi_srdy_interrupt, + IRQF_TRIGGER_RISING, DRVNAME, + (void *)ifx_dev); + if (ret) { + dev_err(&spi->dev, "Unable to get irq %x", + gpio_to_irq(ifx_dev->gpio.srdy)); + goto error_ret7; + } + + /* set pm runtime power state and register with power system */ + pm_runtime_set_active(&spi->dev); + pm_runtime_enable(&spi->dev); + + /* handle case that modem is already signaling SRDY */ + /* no outgoing tty open at this point, this just satisfies the + * modem's read and should reset communication properly + */ + srdy = gpio_get_value(ifx_dev->gpio.srdy); + + if (srdy) { + mrdy_assert(ifx_dev); + ifx_spi_handle_srdy(ifx_dev); + } else + mrdy_set_low(ifx_dev); + return 0; + +error_ret7: + free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev); +error_ret6: + gpio_free(ifx_dev->gpio.srdy); +error_ret5: + gpio_free(ifx_dev->gpio.mrdy); +error_ret4: + gpio_free(ifx_dev->gpio.reset); +error_ret3: + gpio_free(ifx_dev->gpio.po); +error_ret2: + gpio_free(ifx_dev->gpio.reset_out); +error_ret: + ifx_spi_free_device(ifx_dev); + saved_ifx_dev = NULL; + return ret; +} + +/** + * ifx_spi_spi_remove - SPI device was removed + * @spi: SPI device + * + * FIXME: We should be shutting the device down here not in + * the module unload path. + */ + +static int ifx_spi_spi_remove(struct spi_device *spi) +{ + struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); + /* stop activity */ + tasklet_kill(&ifx_dev->io_work_tasklet); + /* free irq */ + free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev); + free_irq(gpio_to_irq(ifx_dev->gpio.srdy), (void *)ifx_dev); + + gpio_free(ifx_dev->gpio.srdy); + gpio_free(ifx_dev->gpio.mrdy); + gpio_free(ifx_dev->gpio.reset); + gpio_free(ifx_dev->gpio.po); + gpio_free(ifx_dev->gpio.reset_out); + + /* free allocations */ + ifx_spi_free_device(ifx_dev); + + saved_ifx_dev = NULL; + return 0; +} + +/** + * ifx_spi_spi_shutdown - called on SPI shutdown + * @spi: SPI device + * + * No action needs to be taken here + */ + +static void ifx_spi_spi_shutdown(struct spi_device *spi) +{ +} + +/* + * various suspends and resumes have nothing to do + * no hardware to save state for + */ + +/** + * ifx_spi_spi_suspend - suspend SPI on system suspend + * @dev: device being suspended + * + * Suspend the SPI side. No action needed on Intel MID platforms, may + * need extending for other systems. + */ +static int ifx_spi_spi_suspend(struct spi_device *spi, pm_message_t msg) +{ + return 0; +} + +/** + * ifx_spi_spi_resume - resume SPI side on system resume + * @dev: device being suspended + * + * Suspend the SPI side. No action needed on Intel MID platforms, may + * need extending for other systems. + */ +static int ifx_spi_spi_resume(struct spi_device *spi) +{ + return 0; +} + +/** + * ifx_spi_pm_suspend - suspend modem on system suspend + * @dev: device being suspended + * + * Suspend the modem. No action needed on Intel MID platforms, may + * need extending for other systems. + */ +static int ifx_spi_pm_suspend(struct device *dev) +{ + return 0; +} + +/** + * ifx_spi_pm_resume - resume modem on system resume + * @dev: device being suspended + * + * Allow the modem to resume. No action needed. + * + * FIXME: do we need to reset anything here ? + */ +static int ifx_spi_pm_resume(struct device *dev) +{ + return 0; +} + +/** + * ifx_spi_pm_runtime_resume - suspend modem + * @dev: device being suspended + * + * Allow the modem to resume. No action needed. + */ +static int ifx_spi_pm_runtime_resume(struct device *dev) +{ + return 0; +} + +/** + * ifx_spi_pm_runtime_suspend - suspend modem + * @dev: device being suspended + * + * Allow the modem to suspend and thus suspend to continue up the + * device tree. + */ +static int ifx_spi_pm_runtime_suspend(struct device *dev) +{ + return 0; +} + +/** + * ifx_spi_pm_runtime_idle - check if modem idle + * @dev: our device + * + * Check conditions and queue runtime suspend if idle. + */ +static int ifx_spi_pm_runtime_idle(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi); + + if (!ifx_dev->power_status) + pm_runtime_suspend(dev); + + return 0; +} + +static const struct dev_pm_ops ifx_spi_pm = { + .resume = ifx_spi_pm_resume, + .suspend = ifx_spi_pm_suspend, + .runtime_resume = ifx_spi_pm_runtime_resume, + .runtime_suspend = ifx_spi_pm_runtime_suspend, + .runtime_idle = ifx_spi_pm_runtime_idle +}; + +static const struct spi_device_id ifx_id_table[] = { + {"ifx6160", 0}, + {"ifx6260", 0}, + { } +}; +MODULE_DEVICE_TABLE(spi, ifx_id_table); + +/* spi operations */ +static const struct spi_driver ifx_spi_driver_6160 = { + .driver = { + .name = "ifx6160", + .bus = &spi_bus_type, + .pm = &ifx_spi_pm, + .owner = THIS_MODULE}, + .probe = ifx_spi_spi_probe, + .shutdown = ifx_spi_spi_shutdown, + .remove = __devexit_p(ifx_spi_spi_remove), + .suspend = ifx_spi_spi_suspend, + .resume = ifx_spi_spi_resume, + .id_table = ifx_id_table +}; + +/** + * ifx_spi_exit - module exit + * + * Unload the module. + */ + +static void __exit ifx_spi_exit(void) +{ + /* unregister */ + tty_unregister_driver(tty_drv); + spi_unregister_driver((void *)&ifx_spi_driver_6160); +} + +/** + * ifx_spi_init - module entry point + * + * Initialise the SPI and tty interfaces for the IFX SPI driver + * We need to initialize upper-edge spi driver after the tty + * driver because otherwise the spi probe will race + */ + +static int __init ifx_spi_init(void) +{ + int result; + + tty_drv = alloc_tty_driver(1); + if (!tty_drv) { + pr_err("%s: alloc_tty_driver failed", DRVNAME); + return -ENOMEM; + } + + tty_drv->magic = TTY_DRIVER_MAGIC; + tty_drv->owner = THIS_MODULE; + tty_drv->driver_name = DRVNAME; + tty_drv->name = TTYNAME; + tty_drv->minor_start = IFX_SPI_TTY_ID; + tty_drv->num = 1; + tty_drv->type = TTY_DRIVER_TYPE_SERIAL; + tty_drv->subtype = SERIAL_TYPE_NORMAL; + tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty_drv->init_termios = tty_std_termios; + + tty_set_operations(tty_drv, &ifx_spi_serial_ops); + + result = tty_register_driver(tty_drv); + if (result) { + pr_err("%s: tty_register_driver failed(%d)", + DRVNAME, result); + put_tty_driver(tty_drv); + return result; + } + + result = spi_register_driver((void *)&ifx_spi_driver_6160); + if (result) { + pr_err("%s: spi_register_driver failed(%d)", + DRVNAME, result); + tty_unregister_driver(tty_drv); + } + return result; +} + +module_init(ifx_spi_init); +module_exit(ifx_spi_exit); + +MODULE_AUTHOR("Intel"); +MODULE_DESCRIPTION("IFX6x60 spi driver"); +MODULE_LICENSE("GPL"); +MODULE_INFO(Version, "0.1-IFX6x60"); diff --git a/drivers/tty/serial/ifx6x60.h b/drivers/tty/serial/ifx6x60.h new file mode 100644 index 000000000000..deb7b8d977dc --- /dev/null +++ b/drivers/tty/serial/ifx6x60.h @@ -0,0 +1,129 @@ +/**************************************************************************** + * + * Driver for the IFX spi modem. + * + * Copyright (C) 2009, 2010 Intel Corp + * Jim Stanley + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA + * + * + * + *****************************************************************************/ +#ifndef _IFX6X60_H +#define _IFX6X60_H + +#define DRVNAME "ifx6x60" +#define TTYNAME "ttyIFX" + +/* #define IFX_THROTTLE_CODE */ + +#define IFX_SPI_MAX_MINORS 1 +#define IFX_SPI_TRANSFER_SIZE 2048 +#define IFX_SPI_FIFO_SIZE 4096 + +#define IFX_SPI_HEADER_OVERHEAD 4 +#define IFX_RESET_TIMEOUT msecs_to_jiffies(50) + +/* device flags bitfield definitions */ +#define IFX_SPI_STATE_PRESENT 0 +#define IFX_SPI_STATE_IO_IN_PROGRESS 1 +#define IFX_SPI_STATE_IO_READY 2 +#define IFX_SPI_STATE_TIMER_PENDING 3 + +/* flow control bitfields */ +#define IFX_SPI_DCD 0 +#define IFX_SPI_CTS 1 +#define IFX_SPI_DSR 2 +#define IFX_SPI_RI 3 +#define IFX_SPI_DTR 4 +#define IFX_SPI_RTS 5 +#define IFX_SPI_TX_FC 6 +#define IFX_SPI_RX_FC 7 +#define IFX_SPI_UPDATE 8 + +#define IFX_SPI_PAYLOAD_SIZE (IFX_SPI_TRANSFER_SIZE - \ + IFX_SPI_HEADER_OVERHEAD) + +#define IFX_SPI_IRQ_TYPE DETECT_EDGE_RISING +#define IFX_SPI_GPIO_TARGET 0 +#define IFX_SPI_GPIO0 0x105 + +#define IFX_SPI_STATUS_TIMEOUT (2000*HZ) + +/* values for bits in power status byte */ +#define IFX_SPI_POWER_DATA_PENDING 1 +#define IFX_SPI_POWER_SRDY 2 + +struct ifx_spi_device { + /* Our SPI device */ + struct spi_device *spi_dev; + + /* Port specific data */ + struct kfifo tx_fifo; + spinlock_t fifo_lock; + unsigned long signal_state; + + /* TTY Layer logic */ + struct tty_port tty_port; + struct device *tty_dev; + int minor; + + /* Low level I/O work */ + struct tasklet_struct io_work_tasklet; + unsigned long flags; + dma_addr_t rx_dma; + dma_addr_t tx_dma; + + int is_6160; /* Modem type */ + + spinlock_t write_lock; + int write_pending; + spinlock_t power_lock; + unsigned char power_status; + + unsigned char *rx_buffer; + unsigned char *tx_buffer; + dma_addr_t rx_bus; + dma_addr_t tx_bus; + unsigned char spi_more; + unsigned char spi_slave_cts; + + struct timer_list spi_timer; + + struct spi_message spi_msg; + struct spi_transfer spi_xfer; + + struct { + /* gpio lines */ + unsigned short srdy; /* slave-ready gpio */ + unsigned short mrdy; /* master-ready gpio */ + unsigned short reset; /* modem-reset gpio */ + unsigned short po; /* modem-on gpio */ + unsigned short reset_out; /* modem-in-reset gpio */ + /* state/stats */ + int unack_srdy_int_nb; + } gpio; + + /* modem reset */ + unsigned long mdm_reset_state; +#define MR_START 0 +#define MR_INPROGRESS 1 +#define MR_COMPLETE 2 + wait_queue_head_t mdm_reset_wait; +}; + +#endif /* _IFX6X60_H */ diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c new file mode 100644 index 000000000000..dfcf4b1878aa --- /dev/null +++ b/drivers/tty/serial/imx.c @@ -0,0 +1,1380 @@ +/* + * linux/drivers/serial/imx.c + * + * Driver for Motorola IMX serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Author: Sascha Hauer + * Copyright (C) 2004 Pengutronix + * + * Copyright (C) 2009 emlix GmbH + * Author: Fabian Godehardt (added IrDA support for iMX) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * [29-Mar-2005] Mike Lee + * Added hardware handshake + */ + +#if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* Register definitions */ +#define URXD0 0x0 /* Receiver Register */ +#define URTX0 0x40 /* Transmitter Register */ +#define UCR1 0x80 /* Control Register 1 */ +#define UCR2 0x84 /* Control Register 2 */ +#define UCR3 0x88 /* Control Register 3 */ +#define UCR4 0x8c /* Control Register 4 */ +#define UFCR 0x90 /* FIFO Control Register */ +#define USR1 0x94 /* Status Register 1 */ +#define USR2 0x98 /* Status Register 2 */ +#define UESC 0x9c /* Escape Character Register */ +#define UTIM 0xa0 /* Escape Timer Register */ +#define UBIR 0xa4 /* BRM Incremental Register */ +#define UBMR 0xa8 /* BRM Modulator Register */ +#define UBRC 0xac /* Baud Rate Count Register */ +#define MX2_ONEMS 0xb0 /* One Millisecond register */ +#define UTS (cpu_is_mx1() ? 0xd0 : 0xb4) /* UART Test Register */ + +/* UART Control Register Bit Fields.*/ +#define URXD_CHARRDY (1<<15) +#define URXD_ERR (1<<14) +#define URXD_OVRRUN (1<<13) +#define URXD_FRMERR (1<<12) +#define URXD_BRK (1<<11) +#define URXD_PRERR (1<<10) +#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */ +#define UCR1_ADBR (1<<14) /* Auto detect baud rate */ +#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ +#define UCR1_IDEN (1<<12) /* Idle condition interrupt */ +#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ +#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ +#define UCR1_IREN (1<<7) /* Infrared interface enable */ +#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ +#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ +#define UCR1_SNDBRK (1<<4) /* Send break */ +#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ +#define MX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, mx1 only */ +#define UCR1_DOZE (1<<1) /* Doze */ +#define UCR1_UARTEN (1<<0) /* UART enabled */ +#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ +#define UCR2_IRTS (1<<14) /* Ignore RTS pin */ +#define UCR2_CTSC (1<<13) /* CTS pin control */ +#define UCR2_CTS (1<<12) /* Clear to send */ +#define UCR2_ESCEN (1<<11) /* Escape enable */ +#define UCR2_PREN (1<<8) /* Parity enable */ +#define UCR2_PROE (1<<7) /* Parity odd/even */ +#define UCR2_STPB (1<<6) /* Stop */ +#define UCR2_WS (1<<5) /* Word size */ +#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ +#define UCR2_TXEN (1<<2) /* Transmitter enabled */ +#define UCR2_RXEN (1<<1) /* Receiver enabled */ +#define UCR2_SRST (1<<0) /* SW reset */ +#define UCR3_DTREN (1<<13) /* DTR interrupt enable */ +#define UCR3_PARERREN (1<<12) /* Parity enable */ +#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ +#define UCR3_DSR (1<<10) /* Data set ready */ +#define UCR3_DCD (1<<9) /* Data carrier detect */ +#define UCR3_RI (1<<8) /* Ring indicator */ +#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ +#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ +#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ +#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ +#define MX1_UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */ +#define MX1_UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */ +#define MX2_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */ +#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ +#define UCR3_BPEN (1<<0) /* Preset registers enable */ +#define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */ +#define UCR4_CTSTL_MASK 0x3F /* CTS trigger is 6 bits wide */ +#define UCR4_INVR (1<<9) /* Inverted infrared reception */ +#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ +#define UCR4_WKEN (1<<7) /* Wake interrupt enable */ +#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ +#define UCR4_IRSC (1<<5) /* IR special case */ +#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ +#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ +#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ +#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ +#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ +#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ +#define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7) +#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ +#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ +#define USR1_RTSS (1<<14) /* RTS pin status */ +#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */ +#define USR1_RTSD (1<<12) /* RTS delta */ +#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ +#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ +#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ +#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ +#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ +#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ +#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ +#define USR2_ADET (1<<15) /* Auto baud rate detect complete */ +#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ +#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ +#define USR2_IDLE (1<<12) /* Idle condition */ +#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ +#define USR2_WAKE (1<<7) /* Wake */ +#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ +#define USR2_TXDC (1<<3) /* Transmitter complete */ +#define USR2_BRCD (1<<2) /* Break condition */ +#define USR2_ORE (1<<1) /* Overrun error */ +#define USR2_RDR (1<<0) /* Recv data ready */ +#define UTS_FRCPERR (1<<13) /* Force parity error */ +#define UTS_LOOP (1<<12) /* Loop tx and rx */ +#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ +#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ +#define UTS_TXFULL (1<<4) /* TxFIFO full */ +#define UTS_RXFULL (1<<3) /* RxFIFO full */ +#define UTS_SOFTRST (1<<0) /* Software reset */ + +/* We've been assigned a range on the "Low-density serial ports" major */ +#define SERIAL_IMX_MAJOR 207 +#define MINOR_START 16 +#define DEV_NAME "ttymxc" +#define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS + +/* + * This determines how often we check the modem status signals + * for any change. They generally aren't connected to an IRQ + * so we have to poll them. We also check immediately before + * filling the TX fifo incase CTS has been dropped. + */ +#define MCTRL_TIMEOUT (250*HZ/1000) + +#define DRIVER_NAME "IMX-uart" + +#define UART_NR 8 + +struct imx_port { + struct uart_port port; + struct timer_list timer; + unsigned int old_status; + int txirq,rxirq,rtsirq; + unsigned int have_rtscts:1; + unsigned int use_irda:1; + unsigned int irda_inv_rx:1; + unsigned int irda_inv_tx:1; + unsigned short trcv_delay; /* transceiver delay */ + struct clk *clk; +}; + +#ifdef CONFIG_IRDA +#define USE_IRDA(sport) ((sport)->use_irda) +#else +#define USE_IRDA(sport) (0) +#endif + +/* + * Handle any change of modem status signal since we were last called. + */ +static void imx_mctrl_check(struct imx_port *sport) +{ + unsigned int status, changed; + + status = sport->port.ops->get_mctrl(&sport->port); + changed = status ^ sport->old_status; + + if (changed == 0) + return; + + sport->old_status = status; + + if (changed & TIOCM_RI) + sport->port.icount.rng++; + if (changed & TIOCM_DSR) + sport->port.icount.dsr++; + if (changed & TIOCM_CAR) + uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); + if (changed & TIOCM_CTS) + uart_handle_cts_change(&sport->port, status & TIOCM_CTS); + + wake_up_interruptible(&sport->port.state->port.delta_msr_wait); +} + +/* + * This is our per-port timeout handler, for checking the + * modem status signals. + */ +static void imx_timeout(unsigned long data) +{ + struct imx_port *sport = (struct imx_port *)data; + unsigned long flags; + + if (sport->port.state) { + spin_lock_irqsave(&sport->port.lock, flags); + imx_mctrl_check(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); + + mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); + } +} + +/* + * interrupts disabled on entry + */ +static void imx_stop_tx(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long temp; + + if (USE_IRDA(sport)) { + /* half duplex - wait for end of transmission */ + int n = 256; + while ((--n > 0) && + !(readl(sport->port.membase + USR2) & USR2_TXDC)) { + udelay(5); + barrier(); + } + /* + * irda transceiver - wait a bit more to avoid + * cutoff, hardware dependent + */ + udelay(sport->trcv_delay); + + /* + * half duplex - reactivate receive mode, + * flush receive pipe echo crap + */ + if (readl(sport->port.membase + USR2) & USR2_TXDC) { + temp = readl(sport->port.membase + UCR1); + temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN); + writel(temp, sport->port.membase + UCR1); + + temp = readl(sport->port.membase + UCR4); + temp &= ~(UCR4_TCEN); + writel(temp, sport->port.membase + UCR4); + + while (readl(sport->port.membase + URXD0) & + URXD_CHARRDY) + barrier(); + + temp = readl(sport->port.membase + UCR1); + temp |= UCR1_RRDYEN; + writel(temp, sport->port.membase + UCR1); + + temp = readl(sport->port.membase + UCR4); + temp |= UCR4_DREN; + writel(temp, sport->port.membase + UCR4); + } + return; + } + + temp = readl(sport->port.membase + UCR1); + writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1); +} + +/* + * interrupts disabled on entry + */ +static void imx_stop_rx(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long temp; + + temp = readl(sport->port.membase + UCR2); + writel(temp &~ UCR2_RXEN, sport->port.membase + UCR2); +} + +/* + * Set the modem control timer to fire immediately. + */ +static void imx_enable_ms(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + + mod_timer(&sport->timer, jiffies); +} + +static inline void imx_transmit_buffer(struct imx_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + + while (!uart_circ_empty(xmit) && + !(readl(sport->port.membase + UTS) & UTS_TXFULL)) { + /* send xmit->buf[xmit->tail] + * out the port here */ + writel(xmit->buf[xmit->tail], sport->port.membase + URTX0); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + imx_stop_tx(&sport->port); +} + +/* + * interrupts disabled on entry + */ +static void imx_start_tx(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long temp; + + if (USE_IRDA(sport)) { + /* half duplex in IrDA mode; have to disable receive mode */ + temp = readl(sport->port.membase + UCR4); + temp &= ~(UCR4_DREN); + writel(temp, sport->port.membase + UCR4); + + temp = readl(sport->port.membase + UCR1); + temp &= ~(UCR1_RRDYEN); + writel(temp, sport->port.membase + UCR1); + } + + temp = readl(sport->port.membase + UCR1); + writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1); + + if (USE_IRDA(sport)) { + temp = readl(sport->port.membase + UCR1); + temp |= UCR1_TRDYEN; + writel(temp, sport->port.membase + UCR1); + + temp = readl(sport->port.membase + UCR4); + temp |= UCR4_TCEN; + writel(temp, sport->port.membase + UCR4); + } + + if (readl(sport->port.membase + UTS) & UTS_TXEMPTY) + imx_transmit_buffer(sport); +} + +static irqreturn_t imx_rtsint(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + unsigned int val = readl(sport->port.membase + USR1) & USR1_RTSS; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); + + writel(USR1_RTSD, sport->port.membase + USR1); + uart_handle_cts_change(&sport->port, !!val); + wake_up_interruptible(&sport->port.state->port.delta_msr_wait); + + spin_unlock_irqrestore(&sport->port.lock, flags); + return IRQ_HANDLED; +} + +static irqreturn_t imx_txint(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock,flags); + if (sport->port.x_char) + { + /* Send next char */ + writel(sport->port.x_char, sport->port.membase + URTX0); + goto out; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { + imx_stop_tx(&sport->port); + goto out; + } + + imx_transmit_buffer(sport); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + +out: + spin_unlock_irqrestore(&sport->port.lock,flags); + return IRQ_HANDLED; +} + +static irqreturn_t imx_rxint(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + unsigned int rx,flg,ignored = 0; + struct tty_struct *tty = sport->port.state->port.tty; + unsigned long flags, temp; + + spin_lock_irqsave(&sport->port.lock,flags); + + while (readl(sport->port.membase + USR2) & USR2_RDR) { + flg = TTY_NORMAL; + sport->port.icount.rx++; + + rx = readl(sport->port.membase + URXD0); + + temp = readl(sport->port.membase + USR2); + if (temp & USR2_BRCD) { + writel(USR2_BRCD, sport->port.membase + USR2); + if (uart_handle_break(&sport->port)) + continue; + } + + if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) + continue; + + if (rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) { + if (rx & URXD_PRERR) + sport->port.icount.parity++; + else if (rx & URXD_FRMERR) + sport->port.icount.frame++; + if (rx & URXD_OVRRUN) + sport->port.icount.overrun++; + + if (rx & sport->port.ignore_status_mask) { + if (++ignored > 100) + goto out; + continue; + } + + rx &= sport->port.read_status_mask; + + if (rx & URXD_PRERR) + flg = TTY_PARITY; + else if (rx & URXD_FRMERR) + flg = TTY_FRAME; + if (rx & URXD_OVRRUN) + flg = TTY_OVERRUN; + +#ifdef SUPPORT_SYSRQ + sport->port.sysrq = 0; +#endif + } + + tty_insert_flip_char(tty, rx, flg); + } + +out: + spin_unlock_irqrestore(&sport->port.lock,flags); + tty_flip_buffer_push(tty); + return IRQ_HANDLED; +} + +static irqreturn_t imx_int(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + unsigned int sts; + + sts = readl(sport->port.membase + USR1); + + if (sts & USR1_RRDY) + imx_rxint(irq, dev_id); + + if (sts & USR1_TRDY && + readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN) + imx_txint(irq, dev_id); + + if (sts & USR1_RTSD) + imx_rtsint(irq, dev_id); + + return IRQ_HANDLED; +} + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int imx_tx_empty(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + + return (readl(sport->port.membase + USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0; +} + +/* + * We have a modem side uart, so the meanings of RTS and CTS are inverted. + */ +static unsigned int imx_get_mctrl(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned int tmp = TIOCM_DSR | TIOCM_CAR; + + if (readl(sport->port.membase + USR1) & USR1_RTSS) + tmp |= TIOCM_CTS; + + if (readl(sport->port.membase + UCR2) & UCR2_CTS) + tmp |= TIOCM_RTS; + + return tmp; +} + +static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long temp; + + temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS; + + if (mctrl & TIOCM_RTS) + temp |= UCR2_CTS; + + writel(temp, sport->port.membase + UCR2); +} + +/* + * Interrupts always disabled. + */ +static void imx_break_ctl(struct uart_port *port, int break_state) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long flags, temp; + + spin_lock_irqsave(&sport->port.lock, flags); + + temp = readl(sport->port.membase + UCR1) & ~UCR1_SNDBRK; + + if ( break_state != 0 ) + temp |= UCR1_SNDBRK; + + writel(temp, sport->port.membase + UCR1); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +#define TXTL 2 /* reset default */ +#define RXTL 1 /* reset default */ + +static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) +{ + unsigned int val; + unsigned int ufcr_rfdiv; + + /* set receiver / transmitter trigger level. + * RFDIV is set such way to satisfy requested uartclk value + */ + val = TXTL << 10 | RXTL; + ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2) + / sport->port.uartclk; + + if(!ufcr_rfdiv) + ufcr_rfdiv = 1; + + val |= UFCR_RFDIV_REG(ufcr_rfdiv); + + writel(val, sport->port.membase + UFCR); + + return 0; +} + +/* half the RX buffer size */ +#define CTSTL 16 + +static int imx_startup(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + int retval; + unsigned long flags, temp; + + imx_setup_ufcr(sport, 0); + + /* disable the DREN bit (Data Ready interrupt enable) before + * requesting IRQs + */ + temp = readl(sport->port.membase + UCR4); + + if (USE_IRDA(sport)) + temp |= UCR4_IRSC; + + /* set the trigger level for CTS */ + temp &= ~(UCR4_CTSTL_MASK<< UCR4_CTSTL_SHF); + temp |= CTSTL<< UCR4_CTSTL_SHF; + + writel(temp & ~UCR4_DREN, sport->port.membase + UCR4); + + if (USE_IRDA(sport)) { + /* reset fifo's and state machines */ + int i = 100; + temp = readl(sport->port.membase + UCR2); + temp &= ~UCR2_SRST; + writel(temp, sport->port.membase + UCR2); + while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && + (--i > 0)) { + udelay(1); + } + } + + /* + * Allocate the IRQ(s) i.MX1 has three interrupts whereas later + * chips only have one interrupt. + */ + if (sport->txirq > 0) { + retval = request_irq(sport->rxirq, imx_rxint, 0, + DRIVER_NAME, sport); + if (retval) + goto error_out1; + + retval = request_irq(sport->txirq, imx_txint, 0, + DRIVER_NAME, sport); + if (retval) + goto error_out2; + + /* do not use RTS IRQ on IrDA */ + if (!USE_IRDA(sport)) { + retval = request_irq(sport->rtsirq, imx_rtsint, + (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 : + IRQF_TRIGGER_FALLING | + IRQF_TRIGGER_RISING, + DRIVER_NAME, sport); + if (retval) + goto error_out3; + } + } else { + retval = request_irq(sport->port.irq, imx_int, 0, + DRIVER_NAME, sport); + if (retval) { + free_irq(sport->port.irq, sport); + goto error_out1; + } + } + + /* + * Finally, clear and enable interrupts + */ + writel(USR1_RTSD, sport->port.membase + USR1); + + temp = readl(sport->port.membase + UCR1); + temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN; + + if (USE_IRDA(sport)) { + temp |= UCR1_IREN; + temp &= ~(UCR1_RTSDEN); + } + + writel(temp, sport->port.membase + UCR1); + + temp = readl(sport->port.membase + UCR2); + temp |= (UCR2_RXEN | UCR2_TXEN); + writel(temp, sport->port.membase + UCR2); + + if (USE_IRDA(sport)) { + /* clear RX-FIFO */ + int i = 64; + while ((--i > 0) && + (readl(sport->port.membase + URXD0) & URXD_CHARRDY)) { + barrier(); + } + } + + if (!cpu_is_mx1()) { + temp = readl(sport->port.membase + UCR3); + temp |= MX2_UCR3_RXDMUXSEL; + writel(temp, sport->port.membase + UCR3); + } + + if (USE_IRDA(sport)) { + temp = readl(sport->port.membase + UCR4); + if (sport->irda_inv_rx) + temp |= UCR4_INVR; + else + temp &= ~(UCR4_INVR); + writel(temp | UCR4_DREN, sport->port.membase + UCR4); + + temp = readl(sport->port.membase + UCR3); + if (sport->irda_inv_tx) + temp |= UCR3_INVT; + else + temp &= ~(UCR3_INVT); + writel(temp, sport->port.membase + UCR3); + } + + /* + * Enable modem status interrupts + */ + spin_lock_irqsave(&sport->port.lock,flags); + imx_enable_ms(&sport->port); + spin_unlock_irqrestore(&sport->port.lock,flags); + + if (USE_IRDA(sport)) { + struct imxuart_platform_data *pdata; + pdata = sport->port.dev->platform_data; + sport->irda_inv_rx = pdata->irda_inv_rx; + sport->irda_inv_tx = pdata->irda_inv_tx; + sport->trcv_delay = pdata->transceiver_delay; + if (pdata->irda_enable) + pdata->irda_enable(1); + } + + return 0; + +error_out3: + if (sport->txirq) + free_irq(sport->txirq, sport); +error_out2: + if (sport->rxirq) + free_irq(sport->rxirq, sport); +error_out1: + return retval; +} + +static void imx_shutdown(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long temp; + + temp = readl(sport->port.membase + UCR2); + temp &= ~(UCR2_TXEN); + writel(temp, sport->port.membase + UCR2); + + if (USE_IRDA(sport)) { + struct imxuart_platform_data *pdata; + pdata = sport->port.dev->platform_data; + if (pdata->irda_enable) + pdata->irda_enable(0); + } + + /* + * Stop our timer. + */ + del_timer_sync(&sport->timer); + + /* + * Free the interrupts + */ + if (sport->txirq > 0) { + if (!USE_IRDA(sport)) + free_irq(sport->rtsirq, sport); + free_irq(sport->txirq, sport); + free_irq(sport->rxirq, sport); + } else + free_irq(sport->port.irq, sport); + + /* + * Disable all interrupts, port and break condition. + */ + + temp = readl(sport->port.membase + UCR1); + temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN); + if (USE_IRDA(sport)) + temp &= ~(UCR1_IREN); + + writel(temp, sport->port.membase + UCR1); +} + +static void +imx_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long flags; + unsigned int ucr2, old_ucr1, old_txrxen, baud, quot; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + unsigned int div, ufcr; + unsigned long num, denom; + uint64_t tdiv64; + + /* + * If we don't support modem control lines, don't allow + * these to be set. + */ + if (0) { + termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR); + termios->c_cflag |= CLOCAL; + } + + /* + * We only support CS7 and CS8. + */ + while ((termios->c_cflag & CSIZE) != CS7 && + (termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8) + ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS; + else + ucr2 = UCR2_SRST | UCR2_IRTS; + + if (termios->c_cflag & CRTSCTS) { + if( sport->have_rtscts ) { + ucr2 &= ~UCR2_IRTS; + ucr2 |= UCR2_CTSC; + } else { + termios->c_cflag &= ~CRTSCTS; + } + } + + if (termios->c_cflag & CSTOPB) + ucr2 |= UCR2_STPB; + if (termios->c_cflag & PARENB) { + ucr2 |= UCR2_PREN; + if (termios->c_cflag & PARODD) + ucr2 |= UCR2_PROE; + } + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); + quot = uart_get_divisor(port, baud); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask = 0; + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR); + if (termios->c_iflag & (BRKINT | PARMRK)) + sport->port.read_status_mask |= URXD_BRK; + + /* + * Characters to ignore + */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= URXD_PRERR; + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= URXD_BRK; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= URXD_OVRRUN; + } + + del_timer_sync(&sport->timer); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * disable interrupts and drain transmitter + */ + old_ucr1 = readl(sport->port.membase + UCR1); + writel(old_ucr1 & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN), + sport->port.membase + UCR1); + + while ( !(readl(sport->port.membase + USR2) & USR2_TXDC)) + barrier(); + + /* then, disable everything */ + old_txrxen = readl(sport->port.membase + UCR2); + writel(old_txrxen & ~( UCR2_TXEN | UCR2_RXEN), + sport->port.membase + UCR2); + old_txrxen &= (UCR2_TXEN | UCR2_RXEN); + + if (USE_IRDA(sport)) { + /* + * use maximum available submodule frequency to + * avoid missing short pulses due to low sampling rate + */ + div = 1; + } else { + div = sport->port.uartclk / (baud * 16); + if (div > 7) + div = 7; + if (!div) + div = 1; + } + + rational_best_approximation(16 * div * baud, sport->port.uartclk, + 1 << 16, 1 << 16, &num, &denom); + + tdiv64 = sport->port.uartclk; + tdiv64 *= num; + do_div(tdiv64, denom * 16 * div); + tty_termios_encode_baud_rate(termios, + (speed_t)tdiv64, (speed_t)tdiv64); + + num -= 1; + denom -= 1; + + ufcr = readl(sport->port.membase + UFCR); + ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div); + writel(ufcr, sport->port.membase + UFCR); + + writel(num, sport->port.membase + UBIR); + writel(denom, sport->port.membase + UBMR); + + if (!cpu_is_mx1()) + writel(sport->port.uartclk / div / 1000, + sport->port.membase + MX2_ONEMS); + + writel(old_ucr1, sport->port.membase + UCR1); + + /* set the parity, stop bits and data size */ + writel(ucr2 | old_txrxen, sport->port.membase + UCR2); + + if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) + imx_enable_ms(&sport->port); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static const char *imx_type(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + + return sport->port.type == PORT_IMX ? "IMX" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void imx_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *mmres; + + mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(mmres->start, mmres->end - mmres->start + 1); +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int imx_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *mmres; + void *ret; + + mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mmres) + return -ENODEV; + + ret = request_mem_region(mmres->start, mmres->end - mmres->start + 1, + "imx-uart"); + + return ret ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void imx_config_port(struct uart_port *port, int flags) +{ + struct imx_port *sport = (struct imx_port *)port; + + if (flags & UART_CONFIG_TYPE && + imx_request_port(&sport->port) == 0) + sport->port.type = PORT_IMX; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + * The only change we allow are to the flags and type, and + * even then only between PORT_IMX and PORT_UNKNOWN + */ +static int +imx_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct imx_port *sport = (struct imx_port *)port; + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX) + ret = -EINVAL; + if (sport->port.irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != UPIO_MEM) + ret = -EINVAL; + if (sport->port.uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if ((void *)sport->port.mapbase != ser->iomem_base) + ret = -EINVAL; + if (sport->port.iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +static struct uart_ops imx_pops = { + .tx_empty = imx_tx_empty, + .set_mctrl = imx_set_mctrl, + .get_mctrl = imx_get_mctrl, + .stop_tx = imx_stop_tx, + .start_tx = imx_start_tx, + .stop_rx = imx_stop_rx, + .enable_ms = imx_enable_ms, + .break_ctl = imx_break_ctl, + .startup = imx_startup, + .shutdown = imx_shutdown, + .set_termios = imx_set_termios, + .type = imx_type, + .release_port = imx_release_port, + .request_port = imx_request_port, + .config_port = imx_config_port, + .verify_port = imx_verify_port, +}; + +static struct imx_port *imx_ports[UART_NR]; + +#ifdef CONFIG_SERIAL_IMX_CONSOLE +static void imx_console_putchar(struct uart_port *port, int ch) +{ + struct imx_port *sport = (struct imx_port *)port; + + while (readl(sport->port.membase + UTS) & UTS_TXFULL) + barrier(); + + writel(ch, sport->port.membase + URTX0); +} + +/* + * Interrupts are disabled on entering + */ +static void +imx_console_write(struct console *co, const char *s, unsigned int count) +{ + struct imx_port *sport = imx_ports[co->index]; + unsigned int old_ucr1, old_ucr2, ucr1; + + /* + * First, save UCR1/2 and then disable interrupts + */ + ucr1 = old_ucr1 = readl(sport->port.membase + UCR1); + old_ucr2 = readl(sport->port.membase + UCR2); + + if (cpu_is_mx1()) + ucr1 |= MX1_UCR1_UARTCLKEN; + ucr1 |= UCR1_UARTEN; + ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN); + + writel(ucr1, sport->port.membase + UCR1); + + writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2); + + uart_console_write(&sport->port, s, count, imx_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore UCR1/2 + */ + while (!(readl(sport->port.membase + USR2) & USR2_TXDC)); + + writel(old_ucr1, sport->port.membase + UCR1); + writel(old_ucr2, sport->port.membase + UCR2); +} + +/* + * If the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init +imx_console_get_options(struct imx_port *sport, int *baud, + int *parity, int *bits) +{ + + if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) { + /* ok, the port was enabled */ + unsigned int ucr2, ubir,ubmr, uartclk; + unsigned int baud_raw; + unsigned int ucfr_rfdiv; + + ucr2 = readl(sport->port.membase + UCR2); + + *parity = 'n'; + if (ucr2 & UCR2_PREN) { + if (ucr2 & UCR2_PROE) + *parity = 'o'; + else + *parity = 'e'; + } + + if (ucr2 & UCR2_WS) + *bits = 8; + else + *bits = 7; + + ubir = readl(sport->port.membase + UBIR) & 0xffff; + ubmr = readl(sport->port.membase + UBMR) & 0xffff; + + ucfr_rfdiv = (readl(sport->port.membase + UFCR) & UFCR_RFDIV) >> 7; + if (ucfr_rfdiv == 6) + ucfr_rfdiv = 7; + else + ucfr_rfdiv = 6 - ucfr_rfdiv; + + uartclk = clk_get_rate(sport->clk); + uartclk /= ucfr_rfdiv; + + { /* + * The next code provides exact computation of + * baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1)) + * without need of float support or long long division, + * which would be required to prevent 32bit arithmetic overflow + */ + unsigned int mul = ubir + 1; + unsigned int div = 16 * (ubmr + 1); + unsigned int rem = uartclk % div; + + baud_raw = (uartclk / div) * mul; + baud_raw += (rem * mul + div / 2) / div; + *baud = (baud_raw + 50) / 100 * 100; + } + + if(*baud != baud_raw) + printk(KERN_INFO "Serial: Console IMX rounded baud rate from %d to %d\n", + baud_raw, *baud); + } +} + +static int __init +imx_console_setup(struct console *co, char *options) +{ + struct imx_port *sport; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports)) + co->index = 0; + sport = imx_ports[co->index]; + if(sport == NULL) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + imx_console_get_options(sport, &baud, &parity, &bits); + + imx_setup_ufcr(sport, 0); + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver imx_reg; +static struct console imx_console = { + .name = DEV_NAME, + .write = imx_console_write, + .device = uart_console_device, + .setup = imx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &imx_reg, +}; + +#define IMX_CONSOLE &imx_console +#else +#define IMX_CONSOLE NULL +#endif + +static struct uart_driver imx_reg = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = DEV_NAME, + .major = SERIAL_IMX_MAJOR, + .minor = MINOR_START, + .nr = ARRAY_SIZE(imx_ports), + .cons = IMX_CONSOLE, +}; + +static int serial_imx_suspend(struct platform_device *dev, pm_message_t state) +{ + struct imx_port *sport = platform_get_drvdata(dev); + + if (sport) + uart_suspend_port(&imx_reg, &sport->port); + + return 0; +} + +static int serial_imx_resume(struct platform_device *dev) +{ + struct imx_port *sport = platform_get_drvdata(dev); + + if (sport) + uart_resume_port(&imx_reg, &sport->port); + + return 0; +} + +static int serial_imx_probe(struct platform_device *pdev) +{ + struct imx_port *sport; + struct imxuart_platform_data *pdata; + void __iomem *base; + int ret = 0; + struct resource *res; + + sport = kzalloc(sizeof(*sport), GFP_KERNEL); + if (!sport) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + goto free; + } + + base = ioremap(res->start, PAGE_SIZE); + if (!base) { + ret = -ENOMEM; + goto free; + } + + sport->port.dev = &pdev->dev; + sport->port.mapbase = res->start; + sport->port.membase = base; + sport->port.type = PORT_IMX, + sport->port.iotype = UPIO_MEM; + sport->port.irq = platform_get_irq(pdev, 0); + sport->rxirq = platform_get_irq(pdev, 0); + sport->txirq = platform_get_irq(pdev, 1); + sport->rtsirq = platform_get_irq(pdev, 2); + sport->port.fifosize = 32; + sport->port.ops = &imx_pops; + sport->port.flags = UPF_BOOT_AUTOCONF; + sport->port.line = pdev->id; + init_timer(&sport->timer); + sport->timer.function = imx_timeout; + sport->timer.data = (unsigned long)sport; + + sport->clk = clk_get(&pdev->dev, "uart"); + if (IS_ERR(sport->clk)) { + ret = PTR_ERR(sport->clk); + goto unmap; + } + clk_enable(sport->clk); + + sport->port.uartclk = clk_get_rate(sport->clk); + + imx_ports[pdev->id] = sport; + + pdata = pdev->dev.platform_data; + if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) + sport->have_rtscts = 1; + +#ifdef CONFIG_IRDA + if (pdata && (pdata->flags & IMXUART_IRDA)) + sport->use_irda = 1; +#endif + + if (pdata && pdata->init) { + ret = pdata->init(pdev); + if (ret) + goto clkput; + } + + ret = uart_add_one_port(&imx_reg, &sport->port); + if (ret) + goto deinit; + platform_set_drvdata(pdev, &sport->port); + + return 0; +deinit: + if (pdata && pdata->exit) + pdata->exit(pdev); +clkput: + clk_put(sport->clk); + clk_disable(sport->clk); +unmap: + iounmap(sport->port.membase); +free: + kfree(sport); + + return ret; +} + +static int serial_imx_remove(struct platform_device *pdev) +{ + struct imxuart_platform_data *pdata; + struct imx_port *sport = platform_get_drvdata(pdev); + + pdata = pdev->dev.platform_data; + + platform_set_drvdata(pdev, NULL); + + if (sport) { + uart_remove_one_port(&imx_reg, &sport->port); + clk_put(sport->clk); + } + + clk_disable(sport->clk); + + if (pdata && pdata->exit) + pdata->exit(pdev); + + iounmap(sport->port.membase); + kfree(sport); + + return 0; +} + +static struct platform_driver serial_imx_driver = { + .probe = serial_imx_probe, + .remove = serial_imx_remove, + + .suspend = serial_imx_suspend, + .resume = serial_imx_resume, + .driver = { + .name = "imx-uart", + .owner = THIS_MODULE, + }, +}; + +static int __init imx_serial_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: IMX driver\n"); + + ret = uart_register_driver(&imx_reg); + if (ret) + return ret; + + ret = platform_driver_register(&serial_imx_driver); + if (ret != 0) + uart_unregister_driver(&imx_reg); + + return 0; +} + +static void __exit imx_serial_exit(void) +{ + platform_driver_unregister(&serial_imx_driver); + uart_unregister_driver(&imx_reg); +} + +module_init(imx_serial_init); +module_exit(imx_serial_exit); + +MODULE_AUTHOR("Sascha Hauer"); +MODULE_DESCRIPTION("IMX generic serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:imx-uart"); diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c new file mode 100644 index 000000000000..ee43efc7bdcc --- /dev/null +++ b/drivers/tty/serial/ioc3_serial.c @@ -0,0 +1,2199 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* + * This file contains a module version of the ioc3 serial driver. This + * includes all the support functions needed (support functions, etc.) + * and the serial driver itself. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Interesting things about the ioc3 + */ + +#define LOGICAL_PORTS 2 /* rs232(0) and rs422(1) */ +#define PORTS_PER_CARD 2 +#define LOGICAL_PORTS_PER_CARD (PORTS_PER_CARD * LOGICAL_PORTS) +#define MAX_CARDS 8 +#define MAX_LOGICAL_PORTS (LOGICAL_PORTS_PER_CARD * MAX_CARDS) + +/* determine given the sio_ir what port it applies to */ +#define GET_PORT_FROM_SIO_IR(_x) (_x & SIO_IR_SA) ? 0 : 1 + + +/* + * we have 2 logical ports (rs232, rs422) for each physical port + * evens are rs232, odds are rs422 + */ +#define GET_PHYSICAL_PORT(_x) ((_x) >> 1) +#define GET_LOGICAL_PORT(_x) ((_x) & 1) +#define IS_PHYSICAL_PORT(_x) !((_x) & 1) +#define IS_RS232(_x) !((_x) & 1) + +static unsigned int Num_of_ioc3_cards; +static unsigned int Submodule_slot; + +/* defining this will get you LOTS of great debug info */ +//#define DEBUG_INTERRUPTS +#define DPRINT_CONFIG(_x...) ; +//#define DPRINT_CONFIG(_x...) printk _x +#define NOT_PROGRESS() ; +//#define NOT_PROGRESS() printk("%s : fails %d\n", __func__, __LINE__) + +/* number of characters we want to transmit to the lower level at a time */ +#define MAX_CHARS 256 +#define FIFO_SIZE (MAX_CHARS-1) /* it's a uchar */ + +/* Device name we're using */ +#define DEVICE_NAME "ttySIOC" +#define DEVICE_MAJOR 204 +#define DEVICE_MINOR 116 + +/* flags for next_char_state */ +#define NCS_BREAK 0x1 +#define NCS_PARITY 0x2 +#define NCS_FRAMING 0x4 +#define NCS_OVERRUN 0x8 + +/* cause we need SOME parameters ... */ +#define MIN_BAUD_SUPPORTED 1200 +#define MAX_BAUD_SUPPORTED 115200 + +/* protocol types supported */ +#define PROTO_RS232 0 +#define PROTO_RS422 1 + +/* Notification types */ +#define N_DATA_READY 0x01 +#define N_OUTPUT_LOWAT 0x02 +#define N_BREAK 0x04 +#define N_PARITY_ERROR 0x08 +#define N_FRAMING_ERROR 0x10 +#define N_OVERRUN_ERROR 0x20 +#define N_DDCD 0x40 +#define N_DCTS 0x80 + +#define N_ALL_INPUT (N_DATA_READY | N_BREAK \ + | N_PARITY_ERROR | N_FRAMING_ERROR \ + | N_OVERRUN_ERROR | N_DDCD | N_DCTS) + +#define N_ALL_OUTPUT N_OUTPUT_LOWAT + +#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR \ + | N_OVERRUN_ERROR) + +#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK \ + | N_PARITY_ERROR | N_FRAMING_ERROR \ + | N_OVERRUN_ERROR | N_DDCD | N_DCTS) + +#define SER_CLK_SPEED(prediv) ((22000000 << 1) / prediv) +#define SER_DIVISOR(x, clk) (((clk) + (x) * 8) / ((x) * 16)) +#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div)) + +/* Some masks */ +#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \ + | UART_LCR_WLEN7 | UART_LCR_WLEN8) +#define LCR_MASK_STOP_BITS (UART_LCR_STOP) + +#define PENDING(_a, _p) (readl(&(_p)->vma->sio_ir) & (_a)->ic_enable) + +#define RING_BUF_SIZE 4096 +#define BUF_SIZE_BIT SBBR_L_SIZE +#define PROD_CONS_MASK PROD_CONS_PTR_4K + +#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4) + +/* driver specific - one per card */ +struct ioc3_card { + struct { + /* uart ports are allocated here */ + struct uart_port icp_uart_port[LOGICAL_PORTS]; + /* the ioc3_port used for this port */ + struct ioc3_port *icp_port; + } ic_port[PORTS_PER_CARD]; + /* currently enabled interrupts */ + uint32_t ic_enable; +}; + +/* Local port info for each IOC3 serial port */ +struct ioc3_port { + /* handy reference material */ + struct uart_port *ip_port; + struct ioc3_card *ip_card; + struct ioc3_driver_data *ip_idd; + struct ioc3_submodule *ip_is; + + /* pci mem addresses for this port */ + struct ioc3_serialregs __iomem *ip_serial_regs; + struct ioc3_uartregs __iomem *ip_uart_regs; + + /* Ring buffer page for this port */ + dma_addr_t ip_dma_ringbuf; + /* vaddr of ring buffer */ + struct ring_buffer *ip_cpu_ringbuf; + + /* Rings for this port */ + struct ring *ip_inring; + struct ring *ip_outring; + + /* Hook to port specific values */ + struct port_hooks *ip_hooks; + + spinlock_t ip_lock; + + /* Various rx/tx parameters */ + int ip_baud; + int ip_tx_lowat; + int ip_rx_timeout; + + /* Copy of notification bits */ + int ip_notify; + + /* Shadow copies of various registers so we don't need to PIO + * read them constantly + */ + uint32_t ip_sscr; + uint32_t ip_tx_prod; + uint32_t ip_rx_cons; + unsigned char ip_flags; +}; + +/* tx low water mark. We need to notify the driver whenever tx is getting + * close to empty so it can refill the tx buffer and keep things going. + * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll + * have no trouble getting in more chars in time (I certainly hope so). + */ +#define TX_LOWAT_LATENCY 1000 +#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY) +#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ) + +/* Flags per port */ +#define INPUT_HIGH 0x01 + /* used to signify that we have turned off the rx_high + * temporarily - we need to drain the fifo and don't + * want to get blasted with interrupts. + */ +#define DCD_ON 0x02 + /* DCD state is on */ +#define LOWAT_WRITTEN 0x04 +#define READ_ABORTED 0x08 + /* the read was aborted - used to avaoid infinate looping + * in the interrupt handler + */ +#define INPUT_ENABLE 0x10 + +/* Since each port has different register offsets and bitmasks + * for everything, we'll store those that we need in tables so we + * don't have to be constantly checking the port we are dealing with. + */ +struct port_hooks { + uint32_t intr_delta_dcd; + uint32_t intr_delta_cts; + uint32_t intr_tx_mt; + uint32_t intr_rx_timer; + uint32_t intr_rx_high; + uint32_t intr_tx_explicit; + uint32_t intr_clear; + uint32_t intr_all; + char rs422_select_pin; +}; + +static struct port_hooks hooks_array[PORTS_PER_CARD] = { + /* values for port A */ + { + .intr_delta_dcd = SIO_IR_SA_DELTA_DCD, + .intr_delta_cts = SIO_IR_SA_DELTA_CTS, + .intr_tx_mt = SIO_IR_SA_TX_MT, + .intr_rx_timer = SIO_IR_SA_RX_TIMER, + .intr_rx_high = SIO_IR_SA_RX_HIGH, + .intr_tx_explicit = SIO_IR_SA_TX_EXPLICIT, + .intr_clear = (SIO_IR_SA_TX_MT | SIO_IR_SA_RX_FULL + | SIO_IR_SA_RX_HIGH + | SIO_IR_SA_RX_TIMER + | SIO_IR_SA_DELTA_DCD + | SIO_IR_SA_DELTA_CTS + | SIO_IR_SA_INT + | SIO_IR_SA_TX_EXPLICIT + | SIO_IR_SA_MEMERR), + .intr_all = SIO_IR_SA, + .rs422_select_pin = GPPR_UARTA_MODESEL_PIN, + }, + + /* values for port B */ + { + .intr_delta_dcd = SIO_IR_SB_DELTA_DCD, + .intr_delta_cts = SIO_IR_SB_DELTA_CTS, + .intr_tx_mt = SIO_IR_SB_TX_MT, + .intr_rx_timer = SIO_IR_SB_RX_TIMER, + .intr_rx_high = SIO_IR_SB_RX_HIGH, + .intr_tx_explicit = SIO_IR_SB_TX_EXPLICIT, + .intr_clear = (SIO_IR_SB_TX_MT | SIO_IR_SB_RX_FULL + | SIO_IR_SB_RX_HIGH + | SIO_IR_SB_RX_TIMER + | SIO_IR_SB_DELTA_DCD + | SIO_IR_SB_DELTA_CTS + | SIO_IR_SB_INT + | SIO_IR_SB_TX_EXPLICIT + | SIO_IR_SB_MEMERR), + .intr_all = SIO_IR_SB, + .rs422_select_pin = GPPR_UARTB_MODESEL_PIN, + } +}; + +struct ring_entry { + union { + struct { + uint32_t alldata; + uint32_t allsc; + } all; + struct { + char data[4]; /* data bytes */ + char sc[4]; /* status/control */ + } s; + } u; +}; + +/* Test the valid bits in any of the 4 sc chars using "allsc" member */ +#define RING_ANY_VALID \ + ((uint32_t)(RXSB_MODEM_VALID | RXSB_DATA_VALID) * 0x01010101) + +#define ring_sc u.s.sc +#define ring_data u.s.data +#define ring_allsc u.all.allsc + +/* Number of entries per ring buffer. */ +#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry)) + +/* An individual ring */ +struct ring { + struct ring_entry entries[ENTRIES_PER_RING]; +}; + +/* The whole enchilada */ +struct ring_buffer { + struct ring TX_A; + struct ring RX_A; + struct ring TX_B; + struct ring RX_B; +}; + +/* Get a ring from a port struct */ +#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh) + +/* for Infinite loop detection */ +#define MAXITER 10000000 + + +/** + * set_baud - Baud rate setting code + * @port: port to set + * @baud: baud rate to use + */ +static int set_baud(struct ioc3_port *port, int baud) +{ + int divisor; + int actual_baud; + int diff; + int lcr, prediv; + struct ioc3_uartregs __iomem *uart; + + for (prediv = 6; prediv < 64; prediv++) { + divisor = SER_DIVISOR(baud, SER_CLK_SPEED(prediv)); + if (!divisor) + continue; /* invalid divisor */ + actual_baud = DIVISOR_TO_BAUD(divisor, SER_CLK_SPEED(prediv)); + + diff = actual_baud - baud; + if (diff < 0) + diff = -diff; + + /* if we're within 1% we've found a match */ + if (diff * 100 <= actual_baud) + break; + } + + /* if the above loop completed, we didn't match + * the baud rate. give up. + */ + if (prediv == 64) { + NOT_PROGRESS(); + return 1; + } + + uart = port->ip_uart_regs; + lcr = readb(&uart->iu_lcr); + + writeb(lcr | UART_LCR_DLAB, &uart->iu_lcr); + writeb((unsigned char)divisor, &uart->iu_dll); + writeb((unsigned char)(divisor >> 8), &uart->iu_dlm); + writeb((unsigned char)prediv, &uart->iu_scr); + writeb((unsigned char)lcr, &uart->iu_lcr); + + return 0; +} + +/** + * get_ioc3_port - given a uart port, return the control structure + * @the_port: uart port to find + */ +static struct ioc3_port *get_ioc3_port(struct uart_port *the_port) +{ + struct ioc3_driver_data *idd = dev_get_drvdata(the_port->dev); + struct ioc3_card *card_ptr = idd->data[Submodule_slot]; + int ii, jj; + + if (!card_ptr) { + NOT_PROGRESS(); + return NULL; + } + for (ii = 0; ii < PORTS_PER_CARD; ii++) { + for (jj = 0; jj < LOGICAL_PORTS; jj++) { + if (the_port == &card_ptr->ic_port[ii].icp_uart_port[jj]) + return card_ptr->ic_port[ii].icp_port; + } + } + NOT_PROGRESS(); + return NULL; +} + +/** + * port_init - Initialize the sio and ioc3 hardware for a given port + * called per port from attach... + * @port: port to initialize + */ +static int inline port_init(struct ioc3_port *port) +{ + uint32_t sio_cr; + struct port_hooks *hooks = port->ip_hooks; + struct ioc3_uartregs __iomem *uart; + int reset_loop_counter = 0xfffff; + struct ioc3_driver_data *idd = port->ip_idd; + + /* Idle the IOC3 serial interface */ + writel(SSCR_RESET, &port->ip_serial_regs->sscr); + + /* Wait until any pending bus activity for this port has ceased */ + do { + sio_cr = readl(&idd->vma->sio_cr); + if (reset_loop_counter-- <= 0) { + printk(KERN_WARNING + "IOC3 unable to come out of reset" + " scr 0x%x\n", sio_cr); + return -1; + } + } while (!(sio_cr & SIO_CR_ARB_DIAG_IDLE) && + (((sio_cr &= SIO_CR_ARB_DIAG) == SIO_CR_ARB_DIAG_TXA) + || sio_cr == SIO_CR_ARB_DIAG_TXB + || sio_cr == SIO_CR_ARB_DIAG_RXA + || sio_cr == SIO_CR_ARB_DIAG_RXB)); + + /* Finish reset sequence */ + writel(0, &port->ip_serial_regs->sscr); + + /* Once RESET is done, reload cached tx_prod and rx_cons values + * and set rings to empty by making prod == cons + */ + port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; + writel(port->ip_tx_prod, &port->ip_serial_regs->stpir); + port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; + writel(port->ip_rx_cons | SRCIR_ARM, &port->ip_serial_regs->srcir); + + /* Disable interrupts for this 16550 */ + uart = port->ip_uart_regs; + writeb(0, &uart->iu_lcr); + writeb(0, &uart->iu_ier); + + /* Set the default baud */ + set_baud(port, port->ip_baud); + + /* Set line control to 8 bits no parity */ + writeb(UART_LCR_WLEN8 | 0, &uart->iu_lcr); + /* UART_LCR_STOP == 1 stop */ + + /* Enable the FIFOs */ + writeb(UART_FCR_ENABLE_FIFO, &uart->iu_fcr); + /* then reset 16550 FIFOs */ + writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + &uart->iu_fcr); + + /* Clear modem control register */ + writeb(0, &uart->iu_mcr); + + /* Clear deltas in modem status register */ + writel(0, &port->ip_serial_regs->shadow); + + /* Only do this once per port pair */ + if (port->ip_hooks == &hooks_array[0]) { + unsigned long ring_pci_addr; + uint32_t __iomem *sbbr_l, *sbbr_h; + + sbbr_l = &idd->vma->sbbr_l; + sbbr_h = &idd->vma->sbbr_h; + ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf; + DPRINT_CONFIG(("%s: ring_pci_addr 0x%p\n", + __func__, (void *)ring_pci_addr)); + + writel((unsigned int)((uint64_t) ring_pci_addr >> 32), sbbr_h); + writel((unsigned int)ring_pci_addr | BUF_SIZE_BIT, sbbr_l); + } + + /* Set the receive timeout value to 10 msec */ + writel(SRTR_HZ / 100, &port->ip_serial_regs->srtr); + + /* Set rx threshold, enable DMA */ + /* Set high water mark at 3/4 of full ring */ + port->ip_sscr = (ENTRIES_PER_RING * 3 / 4); + + /* uart experiences pauses at high baud rate reducing actual + * throughput by 10% or so unless we enable high speed polling + * XXX when this hardware bug is resolved we should revert to + * normal polling speed + */ + port->ip_sscr |= SSCR_HIGH_SPD; + + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + + /* Disable and clear all serial related interrupt bits */ + port->ip_card->ic_enable &= ~hooks->intr_clear; + ioc3_disable(port->ip_is, idd, hooks->intr_clear); + ioc3_ack(port->ip_is, idd, hooks->intr_clear); + return 0; +} + +/** + * enable_intrs - enable interrupts + * @port: port to enable + * @mask: mask to use + */ +static void enable_intrs(struct ioc3_port *port, uint32_t mask) +{ + if ((port->ip_card->ic_enable & mask) != mask) { + port->ip_card->ic_enable |= mask; + ioc3_enable(port->ip_is, port->ip_idd, mask); + } +} + +/** + * local_open - local open a port + * @port: port to open + */ +static inline int local_open(struct ioc3_port *port) +{ + int spiniter = 0; + + port->ip_flags = INPUT_ENABLE; + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & SSCR_DMA_EN) { + writel(port->ip_sscr | SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while ((readl(&port->ip_serial_regs->sscr) + & SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) { + NOT_PROGRESS(); + return -1; + } + } + } + + /* Reset the input fifo. If the uart received chars while the port + * was closed and DMA is not enabled, the uart may have a bunch of + * chars hanging around in its rx fifo which will not be discarded + * by rclr in the upper layer. We must get rid of them here. + */ + writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR, + &port->ip_uart_regs->iu_fcr); + + writeb(UART_LCR_WLEN8, &port->ip_uart_regs->iu_lcr); + /* UART_LCR_STOP == 1 stop */ + + /* Re-enable DMA, set default threshold to intr whenever there is + * data available. + */ + port->ip_sscr &= ~SSCR_RX_THRESHOLD; + port->ip_sscr |= 1; /* default threshold */ + + /* Plug in the new sscr. This implicitly clears the DMA_PAUSE + * flag if it was set above + */ + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + port->ip_tx_lowat = 1; + return 0; +} + +/** + * set_rx_timeout - Set rx timeout and threshold values. + * @port: port to use + * @timeout: timeout value in ticks + */ +static inline int set_rx_timeout(struct ioc3_port *port, int timeout) +{ + int threshold; + + port->ip_rx_timeout = timeout; + + /* Timeout is in ticks. Let's figure out how many chars we + * can receive at the current baud rate in that interval + * and set the rx threshold to that amount. There are 4 chars + * per ring entry, so we'll divide the number of chars that will + * arrive in timeout by 4. + * So .... timeout * baud / 10 / HZ / 4, with HZ = 100. + */ + threshold = timeout * port->ip_baud / 4000; + if (threshold == 0) + threshold = 1; /* otherwise we'll intr all the time! */ + + if ((unsigned)threshold > (unsigned)SSCR_RX_THRESHOLD) + return 1; + + port->ip_sscr &= ~SSCR_RX_THRESHOLD; + port->ip_sscr |= threshold; + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + + /* Now set the rx timeout to the given value + * again timeout * SRTR_HZ / HZ + */ + timeout = timeout * SRTR_HZ / 100; + if (timeout > SRTR_CNT) + timeout = SRTR_CNT; + writel(timeout, &port->ip_serial_regs->srtr); + return 0; +} + +/** + * config_port - config the hardware + * @port: port to config + * @baud: baud rate for the port + * @byte_size: data size + * @stop_bits: number of stop bits + * @parenb: parity enable ? + * @parodd: odd parity ? + */ +static inline int +config_port(struct ioc3_port *port, + int baud, int byte_size, int stop_bits, int parenb, int parodd) +{ + char lcr, sizebits; + int spiniter = 0; + + DPRINT_CONFIG(("%s: line %d baud %d byte_size %d stop %d parenb %d " + "parodd %d\n", + __func__, ((struct uart_port *)port->ip_port)->line, + baud, byte_size, stop_bits, parenb, parodd)); + + if (set_baud(port, baud)) + return 1; + + switch (byte_size) { + case 5: + sizebits = UART_LCR_WLEN5; + break; + case 6: + sizebits = UART_LCR_WLEN6; + break; + case 7: + sizebits = UART_LCR_WLEN7; + break; + case 8: + sizebits = UART_LCR_WLEN8; + break; + default: + return 1; + } + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & SSCR_DMA_EN) { + writel(port->ip_sscr | SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while ((readl(&port->ip_serial_regs->sscr) + & SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) + return -1; + } + } + + /* Clear relevant fields in lcr */ + lcr = readb(&port->ip_uart_regs->iu_lcr); + lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR | + UART_LCR_PARITY | LCR_MASK_STOP_BITS); + + /* Set byte size in lcr */ + lcr |= sizebits; + + /* Set parity */ + if (parenb) { + lcr |= UART_LCR_PARITY; + if (!parodd) + lcr |= UART_LCR_EPAR; + } + + /* Set stop bits */ + if (stop_bits) + lcr |= UART_LCR_STOP /* 2 stop bits */ ; + + writeb(lcr, &port->ip_uart_regs->iu_lcr); + + /* Re-enable the DMA interface if necessary */ + if (port->ip_sscr & SSCR_DMA_EN) { + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + port->ip_baud = baud; + + /* When we get within this number of ring entries of filling the + * entire ring on tx, place an EXPLICIT intr to generate a lowat + * notification when output has drained. + */ + port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4; + if (port->ip_tx_lowat == 0) + port->ip_tx_lowat = 1; + + set_rx_timeout(port, 2); + return 0; +} + +/** + * do_write - Write bytes to the port. Returns the number of bytes + * actually written. Called from transmit_chars + * @port: port to use + * @buf: the stuff to write + * @len: how many bytes in 'buf' + */ +static inline int do_write(struct ioc3_port *port, char *buf, int len) +{ + int prod_ptr, cons_ptr, total = 0; + struct ring *outring; + struct ring_entry *entry; + struct port_hooks *hooks = port->ip_hooks; + + BUG_ON(!(len >= 0)); + + prod_ptr = port->ip_tx_prod; + cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; + outring = port->ip_outring; + + /* Maintain a 1-entry red-zone. The ring buffer is full when + * (cons - prod) % ring_size is 1. Rather than do this subtraction + * in the body of the loop, I'll do it now. + */ + cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK; + + /* Stuff the bytes into the output */ + while ((prod_ptr != cons_ptr) && (len > 0)) { + int xx; + + /* Get 4 bytes (one ring entry) at a time */ + entry = (struct ring_entry *)((caddr_t) outring + prod_ptr); + + /* Invalidate all entries */ + entry->ring_allsc = 0; + + /* Copy in some bytes */ + for (xx = 0; (xx < 4) && (len > 0); xx++) { + entry->ring_data[xx] = *buf++; + entry->ring_sc[xx] = TXCB_VALID; + len--; + total++; + } + + /* If we are within some small threshold of filling up the + * entire ring buffer, we must place an EXPLICIT intr here + * to generate a lowat interrupt in case we subsequently + * really do fill up the ring and the caller goes to sleep. + * No need to place more than one though. + */ + if (!(port->ip_flags & LOWAT_WRITTEN) && + ((cons_ptr - prod_ptr) & PROD_CONS_MASK) + <= port->ip_tx_lowat * (int)sizeof(struct ring_entry)) { + port->ip_flags |= LOWAT_WRITTEN; + entry->ring_sc[0] |= TXCB_INT_WHEN_DONE; + } + + /* Go on to next entry */ + prod_ptr += sizeof(struct ring_entry); + prod_ptr &= PROD_CONS_MASK; + } + + /* If we sent something, start DMA if necessary */ + if (total > 0 && !(port->ip_sscr & SSCR_DMA_EN)) { + port->ip_sscr |= SSCR_DMA_EN; + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + + /* Store the new producer pointer. If tx is disabled, we stuff the + * data into the ring buffer, but we don't actually start tx. + */ + if (!uart_tx_stopped(port->ip_port)) { + writel(prod_ptr, &port->ip_serial_regs->stpir); + + /* If we are now transmitting, enable tx_mt interrupt so we + * can disable DMA if necessary when the tx finishes. + */ + if (total > 0) + enable_intrs(port, hooks->intr_tx_mt); + } + port->ip_tx_prod = prod_ptr; + + return total; +} + +/** + * disable_intrs - disable interrupts + * @port: port to enable + * @mask: mask to use + */ +static inline void disable_intrs(struct ioc3_port *port, uint32_t mask) +{ + if (port->ip_card->ic_enable & mask) { + ioc3_disable(port->ip_is, port->ip_idd, mask); + port->ip_card->ic_enable &= ~mask; + } +} + +/** + * set_notification - Modify event notification + * @port: port to use + * @mask: events mask + * @set_on: set ? + */ +static int set_notification(struct ioc3_port *port, int mask, int set_on) +{ + struct port_hooks *hooks = port->ip_hooks; + uint32_t intrbits, sscrbits; + + BUG_ON(!mask); + + intrbits = sscrbits = 0; + + if (mask & N_DATA_READY) + intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high); + if (mask & N_OUTPUT_LOWAT) + intrbits |= hooks->intr_tx_explicit; + if (mask & N_DDCD) { + intrbits |= hooks->intr_delta_dcd; + sscrbits |= SSCR_RX_RING_DCD; + } + if (mask & N_DCTS) + intrbits |= hooks->intr_delta_cts; + + if (set_on) { + enable_intrs(port, intrbits); + port->ip_notify |= mask; + port->ip_sscr |= sscrbits; + } else { + disable_intrs(port, intrbits); + port->ip_notify &= ~mask; + port->ip_sscr &= ~sscrbits; + } + + /* We require DMA if either DATA_READY or DDCD notification is + * currently requested. If neither of these is requested and + * there is currently no tx in progress, DMA may be disabled. + */ + if (port->ip_notify & (N_DATA_READY | N_DDCD)) + port->ip_sscr |= SSCR_DMA_EN; + else if (!(port->ip_card->ic_enable & hooks->intr_tx_mt)) + port->ip_sscr &= ~SSCR_DMA_EN; + + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + return 0; +} + +/** + * set_mcr - set the master control reg + * @the_port: port to use + * @mask1: mcr mask + * @mask2: shadow mask + */ +static inline int set_mcr(struct uart_port *the_port, + int mask1, int mask2) +{ + struct ioc3_port *port = get_ioc3_port(the_port); + uint32_t shadow; + int spiniter = 0; + char mcr; + + if (!port) + return -1; + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & SSCR_DMA_EN) { + writel(port->ip_sscr | SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while ((readl(&port->ip_serial_regs->sscr) + & SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) + return -1; + } + } + shadow = readl(&port->ip_serial_regs->shadow); + mcr = (shadow & 0xff000000) >> 24; + + /* Set new value */ + mcr |= mask1; + shadow |= mask2; + writeb(mcr, &port->ip_uart_regs->iu_mcr); + writel(shadow, &port->ip_serial_regs->shadow); + + /* Re-enable the DMA interface if necessary */ + if (port->ip_sscr & SSCR_DMA_EN) { + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + return 0; +} + +/** + * ioc3_set_proto - set the protocol for the port + * @port: port to use + * @proto: protocol to use + */ +static int ioc3_set_proto(struct ioc3_port *port, int proto) +{ + struct port_hooks *hooks = port->ip_hooks; + + switch (proto) { + default: + case PROTO_RS232: + /* Clear the appropriate GIO pin */ + DPRINT_CONFIG(("%s: rs232\n", __func__)); + writel(0, (&port->ip_idd->vma->gppr[0] + + hooks->rs422_select_pin)); + break; + + case PROTO_RS422: + /* Set the appropriate GIO pin */ + DPRINT_CONFIG(("%s: rs422\n", __func__)); + writel(1, (&port->ip_idd->vma->gppr[0] + + hooks->rs422_select_pin)); + break; + } + return 0; +} + +/** + * transmit_chars - upper level write, called with the_port->lock + * @the_port: port to write + */ +static void transmit_chars(struct uart_port *the_port) +{ + int xmit_count, tail, head; + int result; + char *start; + struct tty_struct *tty; + struct ioc3_port *port = get_ioc3_port(the_port); + struct uart_state *state; + + if (!the_port) + return; + if (!port) + return; + + state = the_port->state; + tty = state->port.tty; + + if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) { + /* Nothing to do or hw stopped */ + set_notification(port, N_ALL_OUTPUT, 0); + return; + } + + head = state->xmit.head; + tail = state->xmit.tail; + start = (char *)&state->xmit.buf[tail]; + + /* write out all the data or until the end of the buffer */ + xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail); + if (xmit_count > 0) { + result = do_write(port, start, xmit_count); + if (result > 0) { + /* booking */ + xmit_count -= result; + the_port->icount.tx += result; + /* advance the pointers */ + tail += result; + tail &= UART_XMIT_SIZE - 1; + state->xmit.tail = tail; + start = (char *)&state->xmit.buf[tail]; + } + } + if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS) + uart_write_wakeup(the_port); + + if (uart_circ_empty(&state->xmit)) { + set_notification(port, N_OUTPUT_LOWAT, 0); + } else { + set_notification(port, N_OUTPUT_LOWAT, 1); + } +} + +/** + * ioc3_change_speed - change the speed of the port + * @the_port: port to change + * @new_termios: new termios settings + * @old_termios: old termios settings + */ +static void +ioc3_change_speed(struct uart_port *the_port, + struct ktermios *new_termios, struct ktermios *old_termios) +{ + struct ioc3_port *port = get_ioc3_port(the_port); + unsigned int cflag, iflag; + int baud; + int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8; + struct uart_state *state = the_port->state; + + cflag = new_termios->c_cflag; + iflag = new_termios->c_iflag; + + switch (cflag & CSIZE) { + case CS5: + new_data = 5; + break; + case CS6: + new_data = 6; + break; + case CS7: + new_data = 7; + break; + case CS8: + new_data = 8; + break; + default: + /* cuz we always need a default ... */ + new_data = 5; + break; + } + if (cflag & CSTOPB) { + new_stop = 1; + } + if (cflag & PARENB) { + new_parity_enable = 1; + if (cflag & PARODD) + new_parity = 1; + } + baud = uart_get_baud_rate(the_port, new_termios, old_termios, + MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED); + DPRINT_CONFIG(("%s: returned baud %d for line %d\n", __func__, baud, + the_port->line)); + + if (!the_port->fifosize) + the_port->fifosize = FIFO_SIZE; + uart_update_timeout(the_port, cflag, baud); + + the_port->ignore_status_mask = N_ALL_INPUT; + + state->port.tty->low_latency = 1; + + if (iflag & IGNPAR) + the_port->ignore_status_mask &= ~(N_PARITY_ERROR + | N_FRAMING_ERROR); + if (iflag & IGNBRK) { + the_port->ignore_status_mask &= ~N_BREAK; + if (iflag & IGNPAR) + the_port->ignore_status_mask &= ~N_OVERRUN_ERROR; + } + if (!(cflag & CREAD)) { + /* ignore everything */ + the_port->ignore_status_mask &= ~N_DATA_READY; + } + + if (cflag & CRTSCTS) { + /* enable hardware flow control */ + port->ip_sscr |= SSCR_HFC_EN; + } + else { + /* disable hardware flow control */ + port->ip_sscr &= ~SSCR_HFC_EN; + } + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + + /* Set the configuration and proper notification call */ + DPRINT_CONFIG(("%s : port 0x%p line %d cflag 0%o " + "config_port(baud %d data %d stop %d penable %d " + " parity %d), notification 0x%x\n", + __func__, (void *)port, the_port->line, cflag, baud, + new_data, new_stop, new_parity_enable, new_parity, + the_port->ignore_status_mask)); + + if ((config_port(port, baud, /* baud */ + new_data, /* byte size */ + new_stop, /* stop bits */ + new_parity_enable, /* set parity */ + new_parity)) >= 0) { /* parity 1==odd */ + set_notification(port, the_port->ignore_status_mask, 1); + } +} + +/** + * ic3_startup_local - Start up the serial port - returns >= 0 if no errors + * @the_port: Port to operate on + */ +static inline int ic3_startup_local(struct uart_port *the_port) +{ + struct ioc3_port *port; + + if (!the_port) { + NOT_PROGRESS(); + return -1; + } + + port = get_ioc3_port(the_port); + if (!port) { + NOT_PROGRESS(); + return -1; + } + + local_open(port); + + /* set the protocol */ + ioc3_set_proto(port, IS_RS232(the_port->line) ? PROTO_RS232 : + PROTO_RS422); + return 0; +} + +/* + * ioc3_cb_output_lowat - called when the output low water mark is hit + * @port: port to output + */ +static void ioc3_cb_output_lowat(struct ioc3_port *port) +{ + unsigned long pflags; + + /* the_port->lock is set on the call here */ + if (port->ip_port) { + spin_lock_irqsave(&port->ip_port->lock, pflags); + transmit_chars(port->ip_port); + spin_unlock_irqrestore(&port->ip_port->lock, pflags); + } +} + +/* + * ioc3_cb_post_ncs - called for some basic errors + * @port: port to use + * @ncs: event + */ +static void ioc3_cb_post_ncs(struct uart_port *the_port, int ncs) +{ + struct uart_icount *icount; + + icount = &the_port->icount; + + if (ncs & NCS_BREAK) + icount->brk++; + if (ncs & NCS_FRAMING) + icount->frame++; + if (ncs & NCS_OVERRUN) + icount->overrun++; + if (ncs & NCS_PARITY) + icount->parity++; +} + +/** + * do_read - Read in bytes from the port. Return the number of bytes + * actually read. + * @the_port: port to use + * @buf: place to put the stuff we read + * @len: how big 'buf' is + */ + +static inline int do_read(struct uart_port *the_port, char *buf, int len) +{ + int prod_ptr, cons_ptr, total; + struct ioc3_port *port = get_ioc3_port(the_port); + struct ring *inring; + struct ring_entry *entry; + struct port_hooks *hooks = port->ip_hooks; + int byte_num; + char *sc; + int loop_counter; + + BUG_ON(!(len >= 0)); + BUG_ON(!port); + + /* There is a nasty timing issue in the IOC3. When the rx_timer + * expires or the rx_high condition arises, we take an interrupt. + * At some point while servicing the interrupt, we read bytes from + * the ring buffer and re-arm the rx_timer. However the rx_timer is + * not started until the first byte is received *after* it is armed, + * and any bytes pending in the rx construction buffers are not drained + * to memory until either there are 4 bytes available or the rx_timer + * expires. This leads to a potential situation where data is left + * in the construction buffers forever - 1 to 3 bytes were received + * after the interrupt was generated but before the rx_timer was + * re-armed. At that point as long as no subsequent bytes are received + * the timer will never be started and the bytes will remain in the + * construction buffer forever. The solution is to execute a DRAIN + * command after rearming the timer. This way any bytes received before + * the DRAIN will be drained to memory, and any bytes received after + * the DRAIN will start the TIMER and be drained when it expires. + * Luckily, this only needs to be done when the DMA buffer is empty + * since there is no requirement that this function return all + * available data as long as it returns some. + */ + /* Re-arm the timer */ + + writel(port->ip_rx_cons | SRCIR_ARM, &port->ip_serial_regs->srcir); + + prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; + cons_ptr = port->ip_rx_cons; + + if (prod_ptr == cons_ptr) { + int reset_dma = 0; + + /* Input buffer appears empty, do a flush. */ + + /* DMA must be enabled for this to work. */ + if (!(port->ip_sscr & SSCR_DMA_EN)) { + port->ip_sscr |= SSCR_DMA_EN; + reset_dma = 1; + } + + /* Potential race condition: we must reload the srpir after + * issuing the drain command, otherwise we could think the rx + * buffer is empty, then take a very long interrupt, and when + * we come back it's full and we wait forever for the drain to + * complete. + */ + writel(port->ip_sscr | SSCR_RX_DRAIN, + &port->ip_serial_regs->sscr); + prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; + + /* We must not wait for the DRAIN to complete unless there are + * at least 8 bytes (2 ring entries) available to receive the + * data otherwise the DRAIN will never complete and we'll + * deadlock here. + * In fact, to make things easier, I'll just ignore the flush if + * there is any data at all now available. + */ + if (prod_ptr == cons_ptr) { + loop_counter = 0; + while (readl(&port->ip_serial_regs->sscr) & + SSCR_RX_DRAIN) { + loop_counter++; + if (loop_counter > MAXITER) + return -1; + } + + /* SIGH. We have to reload the prod_ptr *again* since + * the drain may have caused it to change + */ + prod_ptr = readl(&port->ip_serial_regs->srpir) + & PROD_CONS_MASK; + } + if (reset_dma) { + port->ip_sscr &= ~SSCR_DMA_EN; + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + } + inring = port->ip_inring; + port->ip_flags &= ~READ_ABORTED; + + total = 0; + loop_counter = 0xfffff; /* to avoid hangs */ + + /* Grab bytes from the hardware */ + while ((prod_ptr != cons_ptr) && (len > 0)) { + entry = (struct ring_entry *)((caddr_t) inring + cons_ptr); + + if (loop_counter-- <= 0) { + printk(KERN_WARNING "IOC3 serial: " + "possible hang condition/" + "port stuck on read (line %d).\n", + the_port->line); + break; + } + + /* According to the producer pointer, this ring entry + * must contain some data. But if the PIO happened faster + * than the DMA, the data may not be available yet, so let's + * wait until it arrives. + */ + if ((entry->ring_allsc & RING_ANY_VALID) == 0) { + /* Indicate the read is aborted so we don't disable + * the interrupt thinking that the consumer is + * congested. + */ + port->ip_flags |= READ_ABORTED; + len = 0; + break; + } + + /* Load the bytes/status out of the ring entry */ + for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) { + sc = &(entry->ring_sc[byte_num]); + + /* Check for change in modem state or overrun */ + if ((*sc & RXSB_MODEM_VALID) + && (port->ip_notify & N_DDCD)) { + /* Notify upper layer if DCD dropped */ + if ((port->ip_flags & DCD_ON) + && !(*sc & RXSB_DCD)) { + /* If we have already copied some data, + * return it. We'll pick up the carrier + * drop on the next pass. That way we + * don't throw away the data that has + * already been copied back to + * the caller's buffer. + */ + if (total > 0) { + len = 0; + break; + } + port->ip_flags &= ~DCD_ON; + + /* Turn off this notification so the + * carrier drop protocol won't see it + * again when it does a read. + */ + *sc &= ~RXSB_MODEM_VALID; + + /* To keep things consistent, we need + * to update the consumer pointer so + * the next reader won't come in and + * try to read the same ring entries + * again. This must be done here before + * the dcd change. + */ + + if ((entry->ring_allsc & RING_ANY_VALID) + == 0) { + cons_ptr += (int)sizeof + (struct ring_entry); + cons_ptr &= PROD_CONS_MASK; + } + writel(cons_ptr, + &port->ip_serial_regs->srcir); + port->ip_rx_cons = cons_ptr; + + /* Notify upper layer of carrier drop */ + if ((port->ip_notify & N_DDCD) + && port->ip_port) { + uart_handle_dcd_change + (port->ip_port, 0); + wake_up_interruptible + (&the_port->state-> + port.delta_msr_wait); + } + + /* If we had any data to return, we + * would have returned it above. + */ + return 0; + } + } + if (*sc & RXSB_MODEM_VALID) { + /* Notify that an input overrun occurred */ + if ((*sc & RXSB_OVERRUN) + && (port->ip_notify & N_OVERRUN_ERROR)) { + ioc3_cb_post_ncs(the_port, NCS_OVERRUN); + } + /* Don't look at this byte again */ + *sc &= ~RXSB_MODEM_VALID; + } + + /* Check for valid data or RX errors */ + if ((*sc & RXSB_DATA_VALID) && + ((*sc & (RXSB_PAR_ERR + | RXSB_FRAME_ERR | RXSB_BREAK)) + && (port->ip_notify & (N_PARITY_ERROR + | N_FRAMING_ERROR + | N_BREAK)))) { + /* There is an error condition on the next byte. + * If we have already transferred some bytes, + * we'll stop here. Otherwise if this is the + * first byte to be read, we'll just transfer + * it alone after notifying the + * upper layer of its status. + */ + if (total > 0) { + len = 0; + break; + } else { + if ((*sc & RXSB_PAR_ERR) && + (port-> + ip_notify & N_PARITY_ERROR)) { + ioc3_cb_post_ncs(the_port, + NCS_PARITY); + } + if ((*sc & RXSB_FRAME_ERR) && + (port-> + ip_notify & N_FRAMING_ERROR)) { + ioc3_cb_post_ncs(the_port, + NCS_FRAMING); + } + if ((*sc & RXSB_BREAK) + && (port->ip_notify & N_BREAK)) { + ioc3_cb_post_ncs + (the_port, NCS_BREAK); + } + len = 1; + } + } + if (*sc & RXSB_DATA_VALID) { + *sc &= ~RXSB_DATA_VALID; + *buf = entry->ring_data[byte_num]; + buf++; + len--; + total++; + } + } + + /* If we used up this entry entirely, go on to the next one, + * otherwise we must have run out of buffer space, so + * leave the consumer pointer here for the next read in case + * there are still unread bytes in this entry. + */ + if ((entry->ring_allsc & RING_ANY_VALID) == 0) { + cons_ptr += (int)sizeof(struct ring_entry); + cons_ptr &= PROD_CONS_MASK; + } + } + + /* Update consumer pointer and re-arm rx timer interrupt */ + writel(cons_ptr, &port->ip_serial_regs->srcir); + port->ip_rx_cons = cons_ptr; + + /* If we have now dipped below the rx high water mark and we have + * rx_high interrupt turned off, we can now turn it back on again. + */ + if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr) + & PROD_CONS_MASK) < + ((port-> + ip_sscr & + SSCR_RX_THRESHOLD) + << PROD_CONS_PTR_OFF))) { + port->ip_flags &= ~INPUT_HIGH; + enable_intrs(port, hooks->intr_rx_high); + } + return total; +} + +/** + * receive_chars - upper level read. + * @the_port: port to read from + */ +static int receive_chars(struct uart_port *the_port) +{ + struct tty_struct *tty; + unsigned char ch[MAX_CHARS]; + int read_count = 0, read_room, flip = 0; + struct uart_state *state = the_port->state; + struct ioc3_port *port = get_ioc3_port(the_port); + unsigned long pflags; + + /* Make sure all the pointers are "good" ones */ + if (!state) + return 0; + if (!state->port.tty) + return 0; + + if (!(port->ip_flags & INPUT_ENABLE)) + return 0; + + spin_lock_irqsave(&the_port->lock, pflags); + tty = state->port.tty; + + read_count = do_read(the_port, ch, MAX_CHARS); + if (read_count > 0) { + flip = 1; + read_room = tty_insert_flip_string(tty, ch, read_count); + the_port->icount.rx += read_count; + } + spin_unlock_irqrestore(&the_port->lock, pflags); + + if (flip) + tty_flip_buffer_push(tty); + + return read_count; +} + +/** + * ioc3uart_intr_one - lowest level (per port) interrupt handler. + * @is : submodule + * @idd: driver data + * @pending: interrupts to handle + */ + +static int inline +ioc3uart_intr_one(struct ioc3_submodule *is, + struct ioc3_driver_data *idd, + unsigned int pending) +{ + int port_num = GET_PORT_FROM_SIO_IR(pending); + struct port_hooks *hooks; + unsigned int rx_high_rd_aborted = 0; + unsigned long flags; + struct uart_port *the_port; + struct ioc3_port *port; + int loop_counter; + struct ioc3_card *card_ptr; + unsigned int sio_ir; + + card_ptr = idd->data[is->id]; + port = card_ptr->ic_port[port_num].icp_port; + hooks = port->ip_hooks; + + /* Possible race condition here: The tx_mt interrupt bit may be + * cleared without the intervention of the interrupt handler, + * e.g. by a write. If the top level interrupt handler reads a + * tx_mt, then some other processor does a write, starting up + * output, then we come in here, see the tx_mt and stop DMA, the + * output started by the other processor will hang. Thus we can + * only rely on tx_mt being legitimate if it is read while the + * port lock is held. Therefore this bit must be ignored in the + * passed in interrupt mask which was read by the top level + * interrupt handler since the port lock was not held at the time + * it was read. We can only rely on this bit being accurate if it + * is read while the port lock is held. So we'll clear it for now, + * and reload it later once we have the port lock. + */ + + sio_ir = pending & ~(hooks->intr_tx_mt); + spin_lock_irqsave(&port->ip_lock, flags); + + loop_counter = MAXITER; /* to avoid hangs */ + + do { + uint32_t shadow; + + if (loop_counter-- <= 0) { + printk(KERN_WARNING "IOC3 serial: " + "possible hang condition/" + "port stuck on interrupt (line %d).\n", + ((struct uart_port *)port->ip_port)->line); + break; + } + /* Handle a DCD change */ + if (sio_ir & hooks->intr_delta_dcd) { + ioc3_ack(is, idd, hooks->intr_delta_dcd); + shadow = readl(&port->ip_serial_regs->shadow); + + if ((port->ip_notify & N_DDCD) + && (shadow & SHADOW_DCD) + && (port->ip_port)) { + the_port = port->ip_port; + uart_handle_dcd_change(the_port, + shadow & SHADOW_DCD); + wake_up_interruptible + (&the_port->state->port.delta_msr_wait); + } else if ((port->ip_notify & N_DDCD) + && !(shadow & SHADOW_DCD)) { + /* Flag delta DCD/no DCD */ + uart_handle_dcd_change(port->ip_port, + shadow & SHADOW_DCD); + port->ip_flags |= DCD_ON; + } + } + + /* Handle a CTS change */ + if (sio_ir & hooks->intr_delta_cts) { + ioc3_ack(is, idd, hooks->intr_delta_cts); + shadow = readl(&port->ip_serial_regs->shadow); + + if ((port->ip_notify & N_DCTS) && (port->ip_port)) { + the_port = port->ip_port; + uart_handle_cts_change(the_port, shadow + & SHADOW_CTS); + wake_up_interruptible + (&the_port->state->port.delta_msr_wait); + } + } + + /* rx timeout interrupt. Must be some data available. Put this + * before the check for rx_high since servicing this condition + * may cause that condition to clear. + */ + if (sio_ir & hooks->intr_rx_timer) { + ioc3_ack(is, idd, hooks->intr_rx_timer); + if ((port->ip_notify & N_DATA_READY) + && (port->ip_port)) { + receive_chars(port->ip_port); + } + } + + /* rx high interrupt. Must be after rx_timer. */ + else if (sio_ir & hooks->intr_rx_high) { + /* Data available, notify upper layer */ + if ((port->ip_notify & N_DATA_READY) && port->ip_port) { + receive_chars(port->ip_port); + } + + /* We can't ACK this interrupt. If receive_chars didn't + * cause the condition to clear, we'll have to disable + * the interrupt until the data is drained. + * If the read was aborted, don't disable the interrupt + * as this may cause us to hang indefinitely. An + * aborted read generally means that this interrupt + * hasn't been delivered to the cpu yet anyway, even + * though we see it as asserted when we read the sio_ir. + */ + if ((sio_ir = PENDING(card_ptr, idd)) + & hooks->intr_rx_high) { + if (port->ip_flags & READ_ABORTED) { + rx_high_rd_aborted++; + } + else { + card_ptr->ic_enable &= ~hooks->intr_rx_high; + port->ip_flags |= INPUT_HIGH; + } + } + } + + /* We got a low water interrupt: notify upper layer to + * send more data. Must come before tx_mt since servicing + * this condition may cause that condition to clear. + */ + if (sio_ir & hooks->intr_tx_explicit) { + port->ip_flags &= ~LOWAT_WRITTEN; + ioc3_ack(is, idd, hooks->intr_tx_explicit); + if (port->ip_notify & N_OUTPUT_LOWAT) + ioc3_cb_output_lowat(port); + } + + /* Handle tx_mt. Must come after tx_explicit. */ + else if (sio_ir & hooks->intr_tx_mt) { + /* If we are expecting a lowat notification + * and we get to this point it probably means that for + * some reason the tx_explicit didn't work as expected + * (that can legitimately happen if the output buffer is + * filled up in just the right way). + * So send the notification now. + */ + if (port->ip_notify & N_OUTPUT_LOWAT) { + ioc3_cb_output_lowat(port); + + /* We need to reload the sio_ir since the lowat + * call may have caused another write to occur, + * clearing the tx_mt condition. + */ + sio_ir = PENDING(card_ptr, idd); + } + + /* If the tx_mt condition still persists even after the + * lowat call, we've got some work to do. + */ + if (sio_ir & hooks->intr_tx_mt) { + /* If we are not currently expecting DMA input, + * and the transmitter has just gone idle, + * there is no longer any reason for DMA, so + * disable it. + */ + if (!(port->ip_notify + & (N_DATA_READY | N_DDCD))) { + BUG_ON(!(port->ip_sscr + & SSCR_DMA_EN)); + port->ip_sscr &= ~SSCR_DMA_EN; + writel(port->ip_sscr, + &port->ip_serial_regs->sscr); + } + /* Prevent infinite tx_mt interrupt */ + card_ptr->ic_enable &= ~hooks->intr_tx_mt; + } + } + sio_ir = PENDING(card_ptr, idd); + + /* if the read was aborted and only hooks->intr_rx_high, + * clear hooks->intr_rx_high, so we do not loop forever. + */ + + if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) { + sio_ir &= ~hooks->intr_rx_high; + } + } while (sio_ir & hooks->intr_all); + + spin_unlock_irqrestore(&port->ip_lock, flags); + ioc3_enable(is, idd, card_ptr->ic_enable); + return 0; +} + +/** + * ioc3uart_intr - field all serial interrupts + * @is : submodule + * @idd: driver data + * @pending: interrupts to handle + * + */ + +static int ioc3uart_intr(struct ioc3_submodule *is, + struct ioc3_driver_data *idd, + unsigned int pending) +{ + int ret = 0; + + /* + * The upper level interrupt handler sends interrupts for both ports + * here. So we need to call for each port with its interrupts. + */ + + if (pending & SIO_IR_SA) + ret |= ioc3uart_intr_one(is, idd, pending & SIO_IR_SA); + if (pending & SIO_IR_SB) + ret |= ioc3uart_intr_one(is, idd, pending & SIO_IR_SB); + + return ret; +} + +/** + * ic3_type + * @port: Port to operate with (we ignore since we only have one port) + * + */ +static const char *ic3_type(struct uart_port *the_port) +{ + if (IS_RS232(the_port->line)) + return "SGI IOC3 Serial [rs232]"; + else + return "SGI IOC3 Serial [rs422]"; +} + +/** + * ic3_tx_empty - Is the transmitter empty? + * @port: Port to operate on + * + */ +static unsigned int ic3_tx_empty(struct uart_port *the_port) +{ + unsigned int ret = 0; + struct ioc3_port *port = get_ioc3_port(the_port); + + if (readl(&port->ip_serial_regs->shadow) & SHADOW_TEMT) + ret = TIOCSER_TEMT; + return ret; +} + +/** + * ic3_stop_tx - stop the transmitter + * @port: Port to operate on + * + */ +static void ic3_stop_tx(struct uart_port *the_port) +{ + struct ioc3_port *port = get_ioc3_port(the_port); + + if (port) + set_notification(port, N_OUTPUT_LOWAT, 0); +} + +/** + * ic3_stop_rx - stop the receiver + * @port: Port to operate on + * + */ +static void ic3_stop_rx(struct uart_port *the_port) +{ + struct ioc3_port *port = get_ioc3_port(the_port); + + if (port) + port->ip_flags &= ~INPUT_ENABLE; +} + +/** + * null_void_function + * @port: Port to operate on + * + */ +static void null_void_function(struct uart_port *the_port) +{ +} + +/** + * ic3_shutdown - shut down the port - free irq and disable + * @port: port to shut down + * + */ +static void ic3_shutdown(struct uart_port *the_port) +{ + unsigned long port_flags; + struct ioc3_port *port; + struct uart_state *state; + + port = get_ioc3_port(the_port); + if (!port) + return; + + state = the_port->state; + wake_up_interruptible(&state->port.delta_msr_wait); + + spin_lock_irqsave(&the_port->lock, port_flags); + set_notification(port, N_ALL, 0); + spin_unlock_irqrestore(&the_port->lock, port_flags); +} + +/** + * ic3_set_mctrl - set control lines (dtr, rts, etc) + * @port: Port to operate on + * @mctrl: Lines to set/unset + * + */ +static void ic3_set_mctrl(struct uart_port *the_port, unsigned int mctrl) +{ + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + set_mcr(the_port, mcr, SHADOW_DTR); +} + +/** + * ic3_get_mctrl - get control line info + * @port: port to operate on + * + */ +static unsigned int ic3_get_mctrl(struct uart_port *the_port) +{ + struct ioc3_port *port = get_ioc3_port(the_port); + uint32_t shadow; + unsigned int ret = 0; + + if (!port) + return 0; + + shadow = readl(&port->ip_serial_regs->shadow); + if (shadow & SHADOW_DCD) + ret |= TIOCM_CD; + if (shadow & SHADOW_DR) + ret |= TIOCM_DSR; + if (shadow & SHADOW_CTS) + ret |= TIOCM_CTS; + return ret; +} + +/** + * ic3_start_tx - Start transmitter. Called with the_port->lock + * @port: Port to operate on + * + */ +static void ic3_start_tx(struct uart_port *the_port) +{ + struct ioc3_port *port = get_ioc3_port(the_port); + + if (port) { + set_notification(port, N_OUTPUT_LOWAT, 1); + enable_intrs(port, port->ip_hooks->intr_tx_mt); + } +} + +/** + * ic3_break_ctl - handle breaks + * @port: Port to operate on + * @break_state: Break state + * + */ +static void ic3_break_ctl(struct uart_port *the_port, int break_state) +{ +} + +/** + * ic3_startup - Start up the serial port - always return 0 (We're always on) + * @port: Port to operate on + * + */ +static int ic3_startup(struct uart_port *the_port) +{ + int retval; + struct ioc3_port *port; + struct ioc3_card *card_ptr; + unsigned long port_flags; + + if (!the_port) { + NOT_PROGRESS(); + return -ENODEV; + } + port = get_ioc3_port(the_port); + if (!port) { + NOT_PROGRESS(); + return -ENODEV; + } + card_ptr = port->ip_card; + port->ip_port = the_port; + + if (!card_ptr) { + NOT_PROGRESS(); + return -ENODEV; + } + + /* Start up the serial port */ + spin_lock_irqsave(&the_port->lock, port_flags); + retval = ic3_startup_local(the_port); + spin_unlock_irqrestore(&the_port->lock, port_flags); + return retval; +} + +/** + * ic3_set_termios - set termios stuff + * @port: port to operate on + * @termios: New settings + * @termios: Old + * + */ +static void +ic3_set_termios(struct uart_port *the_port, + struct ktermios *termios, struct ktermios *old_termios) +{ + unsigned long port_flags; + + spin_lock_irqsave(&the_port->lock, port_flags); + ioc3_change_speed(the_port, termios, old_termios); + spin_unlock_irqrestore(&the_port->lock, port_flags); +} + +/** + * ic3_request_port - allocate resources for port - no op.... + * @port: port to operate on + * + */ +static int ic3_request_port(struct uart_port *port) +{ + return 0; +} + +/* Associate the uart functions above - given to serial core */ +static struct uart_ops ioc3_ops = { + .tx_empty = ic3_tx_empty, + .set_mctrl = ic3_set_mctrl, + .get_mctrl = ic3_get_mctrl, + .stop_tx = ic3_stop_tx, + .start_tx = ic3_start_tx, + .stop_rx = ic3_stop_rx, + .enable_ms = null_void_function, + .break_ctl = ic3_break_ctl, + .startup = ic3_startup, + .shutdown = ic3_shutdown, + .set_termios = ic3_set_termios, + .type = ic3_type, + .release_port = null_void_function, + .request_port = ic3_request_port, +}; + +/* + * Boot-time initialization code + */ + +static struct uart_driver ioc3_uart = { + .owner = THIS_MODULE, + .driver_name = "ioc3_serial", + .dev_name = DEVICE_NAME, + .major = DEVICE_MAJOR, + .minor = DEVICE_MINOR, + .nr = MAX_LOGICAL_PORTS +}; + +/** + * ioc3_serial_core_attach - register with serial core + * This is done during pci probing + * @is: submodule struct for this + * @idd: handle for this card + */ +static inline int ioc3_serial_core_attach( struct ioc3_submodule *is, + struct ioc3_driver_data *idd) +{ + struct ioc3_port *port; + struct uart_port *the_port; + struct ioc3_card *card_ptr = idd->data[is->id]; + int ii, phys_port; + struct pci_dev *pdev = idd->pdev; + + DPRINT_CONFIG(("%s: attach pdev 0x%p - card_ptr 0x%p\n", + __func__, pdev, (void *)card_ptr)); + + if (!card_ptr) + return -ENODEV; + + /* once around for each logical port on this card */ + for (ii = 0; ii < LOGICAL_PORTS_PER_CARD; ii++) { + phys_port = GET_PHYSICAL_PORT(ii); + the_port = &card_ptr->ic_port[phys_port]. + icp_uart_port[GET_LOGICAL_PORT(ii)]; + port = card_ptr->ic_port[phys_port].icp_port; + port->ip_port = the_port; + + DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p [%d/%d]\n", + __func__, (void *)the_port, (void *)port, + phys_port, ii)); + + /* membase, iobase and mapbase just need to be non-0 */ + the_port->membase = (unsigned char __iomem *)1; + the_port->iobase = (pdev->bus->number << 16) | ii; + the_port->line = (Num_of_ioc3_cards << 2) | ii; + the_port->mapbase = 1; + the_port->type = PORT_16550A; + the_port->fifosize = FIFO_SIZE; + the_port->ops = &ioc3_ops; + the_port->irq = idd->irq_io; + the_port->dev = &pdev->dev; + + if (uart_add_one_port(&ioc3_uart, the_port) < 0) { + printk(KERN_WARNING + "%s: unable to add port %d bus %d\n", + __func__, the_port->line, pdev->bus->number); + } else { + DPRINT_CONFIG(("IOC3 serial port %d irq %d bus %d\n", + the_port->line, the_port->irq, pdev->bus->number)); + } + + /* all ports are rs232 for now */ + if (IS_PHYSICAL_PORT(ii)) + ioc3_set_proto(port, PROTO_RS232); + } + return 0; +} + +/** + * ioc3uart_remove - register detach function + * @is: submodule struct for this submodule + * @idd: ioc3 driver data for this submodule + */ + +static int ioc3uart_remove(struct ioc3_submodule *is, + struct ioc3_driver_data *idd) +{ + struct ioc3_card *card_ptr = idd->data[is->id]; + struct uart_port *the_port; + struct ioc3_port *port; + int ii; + + if (card_ptr) { + for (ii = 0; ii < LOGICAL_PORTS_PER_CARD; ii++) { + the_port = &card_ptr->ic_port[GET_PHYSICAL_PORT(ii)]. + icp_uart_port[GET_LOGICAL_PORT(ii)]; + if (the_port) + uart_remove_one_port(&ioc3_uart, the_port); + port = card_ptr->ic_port[GET_PHYSICAL_PORT(ii)].icp_port; + if (port && IS_PHYSICAL_PORT(ii) + && (GET_PHYSICAL_PORT(ii) == 0)) { + pci_free_consistent(port->ip_idd->pdev, + TOTAL_RING_BUF_SIZE, + (void *)port->ip_cpu_ringbuf, + port->ip_dma_ringbuf); + kfree(port); + card_ptr->ic_port[GET_PHYSICAL_PORT(ii)]. + icp_port = NULL; + } + } + kfree(card_ptr); + idd->data[is->id] = NULL; + } + return 0; +} + +/** + * ioc3uart_probe - card probe function called from shim driver + * @is: submodule struct for this submodule + * @idd: ioc3 driver data for this card + */ + +static int __devinit +ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) +{ + struct pci_dev *pdev = idd->pdev; + struct ioc3_card *card_ptr; + int ret = 0; + struct ioc3_port *port; + struct ioc3_port *ports[PORTS_PER_CARD]; + int phys_port; + int cnt; + + DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, is, idd)); + + card_ptr = kzalloc(sizeof(struct ioc3_card), GFP_KERNEL); + if (!card_ptr) { + printk(KERN_WARNING "ioc3_attach_one" + ": unable to get memory for the IOC3\n"); + return -ENOMEM; + } + idd->data[is->id] = card_ptr; + Submodule_slot = is->id; + + writel(((UARTA_BASE >> 3) << SIO_CR_SER_A_BASE_SHIFT) | + ((UARTB_BASE >> 3) << SIO_CR_SER_B_BASE_SHIFT) | + (0xf << SIO_CR_CMD_PULSE_SHIFT), &idd->vma->sio_cr); + + pci_write_config_dword(pdev, PCI_LAT, 0xff00); + + /* Enable serial port mode select generic PIO pins as outputs */ + ioc3_gpcr_set(idd, GPCR_UARTA_MODESEL | GPCR_UARTB_MODESEL); + + /* Create port structures for each port */ + for (phys_port = 0; phys_port < PORTS_PER_CARD; phys_port++) { + port = kzalloc(sizeof(struct ioc3_port), GFP_KERNEL); + if (!port) { + printk(KERN_WARNING + "IOC3 serial memory not available for port\n"); + ret = -ENOMEM; + goto out4; + } + spin_lock_init(&port->ip_lock); + + /* we need to remember the previous ones, to point back to + * them farther down - setting up the ring buffers. + */ + ports[phys_port] = port; + + /* init to something useful */ + card_ptr->ic_port[phys_port].icp_port = port; + port->ip_is = is; + port->ip_idd = idd; + port->ip_baud = 9600; + port->ip_card = card_ptr; + port->ip_hooks = &hooks_array[phys_port]; + + /* Setup each port */ + if (phys_port == 0) { + port->ip_serial_regs = &idd->vma->port_a; + port->ip_uart_regs = &idd->vma->sregs.uarta; + + DPRINT_CONFIG(("%s : Port A ip_serial_regs 0x%p " + "ip_uart_regs 0x%p\n", + __func__, + (void *)port->ip_serial_regs, + (void *)port->ip_uart_regs)); + + /* setup ring buffers */ + port->ip_cpu_ringbuf = pci_alloc_consistent(pdev, + TOTAL_RING_BUF_SIZE, &port->ip_dma_ringbuf); + + BUG_ON(!((((int64_t) port->ip_dma_ringbuf) & + (TOTAL_RING_BUF_SIZE - 1)) == 0)); + port->ip_inring = RING(port, RX_A); + port->ip_outring = RING(port, TX_A); + DPRINT_CONFIG(("%s : Port A ip_cpu_ringbuf 0x%p " + "ip_dma_ringbuf 0x%p, ip_inring 0x%p " + "ip_outring 0x%p\n", + __func__, + (void *)port->ip_cpu_ringbuf, + (void *)port->ip_dma_ringbuf, + (void *)port->ip_inring, + (void *)port->ip_outring)); + } + else { + port->ip_serial_regs = &idd->vma->port_b; + port->ip_uart_regs = &idd->vma->sregs.uartb; + + DPRINT_CONFIG(("%s : Port B ip_serial_regs 0x%p " + "ip_uart_regs 0x%p\n", + __func__, + (void *)port->ip_serial_regs, + (void *)port->ip_uart_regs)); + + /* share the ring buffers */ + port->ip_dma_ringbuf = + ports[phys_port - 1]->ip_dma_ringbuf; + port->ip_cpu_ringbuf = + ports[phys_port - 1]->ip_cpu_ringbuf; + port->ip_inring = RING(port, RX_B); + port->ip_outring = RING(port, TX_B); + DPRINT_CONFIG(("%s : Port B ip_cpu_ringbuf 0x%p " + "ip_dma_ringbuf 0x%p, ip_inring 0x%p " + "ip_outring 0x%p\n", + __func__, + (void *)port->ip_cpu_ringbuf, + (void *)port->ip_dma_ringbuf, + (void *)port->ip_inring, + (void *)port->ip_outring)); + } + + DPRINT_CONFIG(("%s : port %d [addr 0x%p] card_ptr 0x%p", + __func__, + phys_port, (void *)port, (void *)card_ptr)); + DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n", + (void *)port->ip_serial_regs, + (void *)port->ip_uart_regs)); + + /* Initialize the hardware for IOC3 */ + port_init(port); + + DPRINT_CONFIG(("%s: phys_port %d port 0x%p inring 0x%p " + "outring 0x%p\n", + __func__, + phys_port, (void *)port, + (void *)port->ip_inring, + (void *)port->ip_outring)); + + } + + /* register port with the serial core */ + + if ((ret = ioc3_serial_core_attach(is, idd))) + goto out4; + + Num_of_ioc3_cards++; + + return ret; + + /* error exits that give back resources */ +out4: + for (cnt = 0; cnt < phys_port; cnt++) + kfree(ports[cnt]); + + kfree(card_ptr); + return ret; +} + +static struct ioc3_submodule ioc3uart_ops = { + .name = "IOC3uart", + .probe = ioc3uart_probe, + .remove = ioc3uart_remove, + /* call .intr for both ports initially */ + .irq_mask = SIO_IR_SA | SIO_IR_SB, + .intr = ioc3uart_intr, + .owner = THIS_MODULE, +}; + +/** + * ioc3_detect - module init called, + */ +static int __init ioc3uart_init(void) +{ + int ret; + + /* register with serial core */ + if ((ret = uart_register_driver(&ioc3_uart)) < 0) { + printk(KERN_WARNING + "%s: Couldn't register IOC3 uart serial driver\n", + __func__); + return ret; + } + ret = ioc3_register_submodule(&ioc3uart_ops); + if (ret) + uart_unregister_driver(&ioc3_uart); + return ret; +} + +static void __exit ioc3uart_exit(void) +{ + ioc3_unregister_submodule(&ioc3uart_ops); + uart_unregister_driver(&ioc3_uart); +} + +module_init(ioc3uart_init); +module_exit(ioc3uart_exit); + +MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) "); +MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC3 card"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c new file mode 100644 index 000000000000..fcfe82653ac8 --- /dev/null +++ b/drivers/tty/serial/ioc4_serial.c @@ -0,0 +1,2953 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003-2006 Silicon Graphics, Inc. All Rights Reserved. + */ + + +/* + * This file contains a module version of the ioc4 serial driver. This + * includes all the support functions needed (support functions, etc.) + * and the serial driver itself. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * interesting things about the ioc4 + */ + +#define IOC4_NUM_SERIAL_PORTS 4 /* max ports per card */ +#define IOC4_NUM_CARDS 8 /* max cards per partition */ + +#define GET_SIO_IR(_n) (_n == 0) ? (IOC4_SIO_IR_S0) : \ + (_n == 1) ? (IOC4_SIO_IR_S1) : \ + (_n == 2) ? (IOC4_SIO_IR_S2) : \ + (IOC4_SIO_IR_S3) + +#define GET_OTHER_IR(_n) (_n == 0) ? (IOC4_OTHER_IR_S0_MEMERR) : \ + (_n == 1) ? (IOC4_OTHER_IR_S1_MEMERR) : \ + (_n == 2) ? (IOC4_OTHER_IR_S2_MEMERR) : \ + (IOC4_OTHER_IR_S3_MEMERR) + + +/* + * All IOC4 registers are 32 bits wide. + */ + +/* + * PCI Memory Space Map + */ +#define IOC4_PCI_ERR_ADDR_L 0x000 /* Low Error Address */ +#define IOC4_PCI_ERR_ADDR_VLD (0x1 << 0) +#define IOC4_PCI_ERR_ADDR_MST_ID_MSK (0xf << 1) +#define IOC4_PCI_ERR_ADDR_MST_NUM_MSK (0xe << 1) +#define IOC4_PCI_ERR_ADDR_MST_TYP_MSK (0x1 << 1) +#define IOC4_PCI_ERR_ADDR_MUL_ERR (0x1 << 5) +#define IOC4_PCI_ERR_ADDR_ADDR_MSK (0x3ffffff << 6) + +/* Interrupt types */ +#define IOC4_SIO_INTR_TYPE 0 +#define IOC4_OTHER_INTR_TYPE 1 +#define IOC4_NUM_INTR_TYPES 2 + +/* Bitmasks for IOC4_SIO_IR, IOC4_SIO_IEC, and IOC4_SIO_IES */ +#define IOC4_SIO_IR_S0_TX_MT 0x00000001 /* Serial port 0 TX empty */ +#define IOC4_SIO_IR_S0_RX_FULL 0x00000002 /* Port 0 RX buf full */ +#define IOC4_SIO_IR_S0_RX_HIGH 0x00000004 /* Port 0 RX hiwat */ +#define IOC4_SIO_IR_S0_RX_TIMER 0x00000008 /* Port 0 RX timeout */ +#define IOC4_SIO_IR_S0_DELTA_DCD 0x00000010 /* Port 0 delta DCD */ +#define IOC4_SIO_IR_S0_DELTA_CTS 0x00000020 /* Port 0 delta CTS */ +#define IOC4_SIO_IR_S0_INT 0x00000040 /* Port 0 pass-thru intr */ +#define IOC4_SIO_IR_S0_TX_EXPLICIT 0x00000080 /* Port 0 explicit TX thru */ +#define IOC4_SIO_IR_S1_TX_MT 0x00000100 /* Serial port 1 */ +#define IOC4_SIO_IR_S1_RX_FULL 0x00000200 /* */ +#define IOC4_SIO_IR_S1_RX_HIGH 0x00000400 /* */ +#define IOC4_SIO_IR_S1_RX_TIMER 0x00000800 /* */ +#define IOC4_SIO_IR_S1_DELTA_DCD 0x00001000 /* */ +#define IOC4_SIO_IR_S1_DELTA_CTS 0x00002000 /* */ +#define IOC4_SIO_IR_S1_INT 0x00004000 /* */ +#define IOC4_SIO_IR_S1_TX_EXPLICIT 0x00008000 /* */ +#define IOC4_SIO_IR_S2_TX_MT 0x00010000 /* Serial port 2 */ +#define IOC4_SIO_IR_S2_RX_FULL 0x00020000 /* */ +#define IOC4_SIO_IR_S2_RX_HIGH 0x00040000 /* */ +#define IOC4_SIO_IR_S2_RX_TIMER 0x00080000 /* */ +#define IOC4_SIO_IR_S2_DELTA_DCD 0x00100000 /* */ +#define IOC4_SIO_IR_S2_DELTA_CTS 0x00200000 /* */ +#define IOC4_SIO_IR_S2_INT 0x00400000 /* */ +#define IOC4_SIO_IR_S2_TX_EXPLICIT 0x00800000 /* */ +#define IOC4_SIO_IR_S3_TX_MT 0x01000000 /* Serial port 3 */ +#define IOC4_SIO_IR_S3_RX_FULL 0x02000000 /* */ +#define IOC4_SIO_IR_S3_RX_HIGH 0x04000000 /* */ +#define IOC4_SIO_IR_S3_RX_TIMER 0x08000000 /* */ +#define IOC4_SIO_IR_S3_DELTA_DCD 0x10000000 /* */ +#define IOC4_SIO_IR_S3_DELTA_CTS 0x20000000 /* */ +#define IOC4_SIO_IR_S3_INT 0x40000000 /* */ +#define IOC4_SIO_IR_S3_TX_EXPLICIT 0x80000000 /* */ + +/* Per device interrupt masks */ +#define IOC4_SIO_IR_S0 (IOC4_SIO_IR_S0_TX_MT | \ + IOC4_SIO_IR_S0_RX_FULL | \ + IOC4_SIO_IR_S0_RX_HIGH | \ + IOC4_SIO_IR_S0_RX_TIMER | \ + IOC4_SIO_IR_S0_DELTA_DCD | \ + IOC4_SIO_IR_S0_DELTA_CTS | \ + IOC4_SIO_IR_S0_INT | \ + IOC4_SIO_IR_S0_TX_EXPLICIT) +#define IOC4_SIO_IR_S1 (IOC4_SIO_IR_S1_TX_MT | \ + IOC4_SIO_IR_S1_RX_FULL | \ + IOC4_SIO_IR_S1_RX_HIGH | \ + IOC4_SIO_IR_S1_RX_TIMER | \ + IOC4_SIO_IR_S1_DELTA_DCD | \ + IOC4_SIO_IR_S1_DELTA_CTS | \ + IOC4_SIO_IR_S1_INT | \ + IOC4_SIO_IR_S1_TX_EXPLICIT) +#define IOC4_SIO_IR_S2 (IOC4_SIO_IR_S2_TX_MT | \ + IOC4_SIO_IR_S2_RX_FULL | \ + IOC4_SIO_IR_S2_RX_HIGH | \ + IOC4_SIO_IR_S2_RX_TIMER | \ + IOC4_SIO_IR_S2_DELTA_DCD | \ + IOC4_SIO_IR_S2_DELTA_CTS | \ + IOC4_SIO_IR_S2_INT | \ + IOC4_SIO_IR_S2_TX_EXPLICIT) +#define IOC4_SIO_IR_S3 (IOC4_SIO_IR_S3_TX_MT | \ + IOC4_SIO_IR_S3_RX_FULL | \ + IOC4_SIO_IR_S3_RX_HIGH | \ + IOC4_SIO_IR_S3_RX_TIMER | \ + IOC4_SIO_IR_S3_DELTA_DCD | \ + IOC4_SIO_IR_S3_DELTA_CTS | \ + IOC4_SIO_IR_S3_INT | \ + IOC4_SIO_IR_S3_TX_EXPLICIT) + +/* Bitmasks for IOC4_OTHER_IR, IOC4_OTHER_IEC, and IOC4_OTHER_IES */ +#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */ +#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */ +#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */ +#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */ +#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */ +#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */ +#define IOC4_OTHER_IR_KBD_INT 0x00000040 /* Keyboard/mouse */ +#define IOC4_OTHER_IR_RESERVED 0x007fff80 /* Reserved */ +#define IOC4_OTHER_IR_RT_INT 0x00800000 /* INT_OUT section output */ +#define IOC4_OTHER_IR_GEN_INT 0xff000000 /* Generic pins */ + +#define IOC4_OTHER_IR_SER_MEMERR (IOC4_OTHER_IR_S0_MEMERR | IOC4_OTHER_IR_S1_MEMERR | \ + IOC4_OTHER_IR_S2_MEMERR | IOC4_OTHER_IR_S3_MEMERR) + +/* Bitmasks for IOC4_SIO_CR */ +#define IOC4_SIO_CR_CMD_PULSE_SHIFT 0 /* byte bus strobe shift */ +#define IOC4_SIO_CR_ARB_DIAG_TX0 0x00000000 +#define IOC4_SIO_CR_ARB_DIAG_RX0 0x00000010 +#define IOC4_SIO_CR_ARB_DIAG_TX1 0x00000020 +#define IOC4_SIO_CR_ARB_DIAG_RX1 0x00000030 +#define IOC4_SIO_CR_ARB_DIAG_TX2 0x00000040 +#define IOC4_SIO_CR_ARB_DIAG_RX2 0x00000050 +#define IOC4_SIO_CR_ARB_DIAG_TX3 0x00000060 +#define IOC4_SIO_CR_ARB_DIAG_RX3 0x00000070 +#define IOC4_SIO_CR_SIO_DIAG_IDLE 0x00000080 /* 0 -> active request among + serial ports (ro) */ +/* Defs for some of the generic I/O pins */ +#define IOC4_GPCR_UART0_MODESEL 0x10 /* Pin is output to port 0 + mode sel */ +#define IOC4_GPCR_UART1_MODESEL 0x20 /* Pin is output to port 1 + mode sel */ +#define IOC4_GPCR_UART2_MODESEL 0x40 /* Pin is output to port 2 + mode sel */ +#define IOC4_GPCR_UART3_MODESEL 0x80 /* Pin is output to port 3 + mode sel */ + +#define IOC4_GPPR_UART0_MODESEL_PIN 4 /* GIO pin controlling + uart 0 mode select */ +#define IOC4_GPPR_UART1_MODESEL_PIN 5 /* GIO pin controlling + uart 1 mode select */ +#define IOC4_GPPR_UART2_MODESEL_PIN 6 /* GIO pin controlling + uart 2 mode select */ +#define IOC4_GPPR_UART3_MODESEL_PIN 7 /* GIO pin controlling + uart 3 mode select */ + +/* Bitmasks for serial RX status byte */ +#define IOC4_RXSB_OVERRUN 0x01 /* Char(s) lost */ +#define IOC4_RXSB_PAR_ERR 0x02 /* Parity error */ +#define IOC4_RXSB_FRAME_ERR 0x04 /* Framing error */ +#define IOC4_RXSB_BREAK 0x08 /* Break character */ +#define IOC4_RXSB_CTS 0x10 /* State of CTS */ +#define IOC4_RXSB_DCD 0x20 /* State of DCD */ +#define IOC4_RXSB_MODEM_VALID 0x40 /* DCD, CTS, and OVERRUN are valid */ +#define IOC4_RXSB_DATA_VALID 0x80 /* Data byte, FRAME_ERR PAR_ERR + * & BREAK valid */ + +/* Bitmasks for serial TX control byte */ +#define IOC4_TXCB_INT_WHEN_DONE 0x20 /* Interrupt after this byte is sent */ +#define IOC4_TXCB_INVALID 0x00 /* Byte is invalid */ +#define IOC4_TXCB_VALID 0x40 /* Byte is valid */ +#define IOC4_TXCB_MCR 0x80 /* Data<7:0> to modem control reg */ +#define IOC4_TXCB_DELAY 0xc0 /* Delay data<7:0> mSec */ + +/* Bitmasks for IOC4_SBBR_L */ +#define IOC4_SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */ + +/* Bitmasks for IOC4_SSCR_<3:0> */ +#define IOC4_SSCR_RX_THRESHOLD 0x000001ff /* Hiwater mark */ +#define IOC4_SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */ +#define IOC4_SSCR_HFC_EN 0x00020000 /* Hardware flow control enabled */ +#define IOC4_SSCR_RX_RING_DCD 0x00040000 /* Post RX record on delta-DCD */ +#define IOC4_SSCR_RX_RING_CTS 0x00080000 /* Post RX record on delta-CTS */ +#define IOC4_SSCR_DIAG 0x00200000 /* Bypass clock divider for sim */ +#define IOC4_SSCR_RX_DRAIN 0x08000000 /* Drain RX buffer to memory */ +#define IOC4_SSCR_DMA_EN 0x10000000 /* Enable ring buffer DMA */ +#define IOC4_SSCR_DMA_PAUSE 0x20000000 /* Pause DMA */ +#define IOC4_SSCR_PAUSE_STATE 0x40000000 /* Sets when PAUSE takes effect */ +#define IOC4_SSCR_RESET 0x80000000 /* Reset DMA channels */ + +/* All producer/comsumer pointers are the same bitfield */ +#define IOC4_PROD_CONS_PTR_4K 0x00000ff8 /* For 4K buffers */ +#define IOC4_PROD_CONS_PTR_1K 0x000003f8 /* For 1K buffers */ +#define IOC4_PROD_CONS_PTR_OFF 3 + +/* Bitmasks for IOC4_SRCIR_<3:0> */ +#define IOC4_SRCIR_ARM 0x80000000 /* Arm RX timer */ + +/* Bitmasks for IOC4_SHADOW_<3:0> */ +#define IOC4_SHADOW_DR 0x00000001 /* Data ready */ +#define IOC4_SHADOW_OE 0x00000002 /* Overrun error */ +#define IOC4_SHADOW_PE 0x00000004 /* Parity error */ +#define IOC4_SHADOW_FE 0x00000008 /* Framing error */ +#define IOC4_SHADOW_BI 0x00000010 /* Break interrupt */ +#define IOC4_SHADOW_THRE 0x00000020 /* Xmit holding register empty */ +#define IOC4_SHADOW_TEMT 0x00000040 /* Xmit shift register empty */ +#define IOC4_SHADOW_RFCE 0x00000080 /* Char in RX fifo has an error */ +#define IOC4_SHADOW_DCTS 0x00010000 /* Delta clear to send */ +#define IOC4_SHADOW_DDCD 0x00080000 /* Delta data carrier detect */ +#define IOC4_SHADOW_CTS 0x00100000 /* Clear to send */ +#define IOC4_SHADOW_DCD 0x00800000 /* Data carrier detect */ +#define IOC4_SHADOW_DTR 0x01000000 /* Data terminal ready */ +#define IOC4_SHADOW_RTS 0x02000000 /* Request to send */ +#define IOC4_SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */ +#define IOC4_SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */ +#define IOC4_SHADOW_LOOP 0x10000000 /* Loopback enabled */ + +/* Bitmasks for IOC4_SRTR_<3:0> */ +#define IOC4_SRTR_CNT 0x00000fff /* Reload value for RX timer */ +#define IOC4_SRTR_CNT_VAL 0x0fff0000 /* Current value of RX timer */ +#define IOC4_SRTR_CNT_VAL_SHIFT 16 +#define IOC4_SRTR_HZ 16000 /* SRTR clock frequency */ + +/* Serial port register map used for DMA and PIO serial I/O */ +struct ioc4_serialregs { + uint32_t sscr; + uint32_t stpir; + uint32_t stcir; + uint32_t srpir; + uint32_t srcir; + uint32_t srtr; + uint32_t shadow; +}; + +/* IOC4 UART register map */ +struct ioc4_uartregs { + char i4u_lcr; + union { + char iir; /* read only */ + char fcr; /* write only */ + } u3; + union { + char ier; /* DLAB == 0 */ + char dlm; /* DLAB == 1 */ + } u2; + union { + char rbr; /* read only, DLAB == 0 */ + char thr; /* write only, DLAB == 0 */ + char dll; /* DLAB == 1 */ + } u1; + char i4u_scr; + char i4u_msr; + char i4u_lsr; + char i4u_mcr; +}; + +/* short names */ +#define i4u_dll u1.dll +#define i4u_ier u2.ier +#define i4u_dlm u2.dlm +#define i4u_fcr u3.fcr + +/* Serial port registers used for DMA serial I/O */ +struct ioc4_serial { + uint32_t sbbr01_l; + uint32_t sbbr01_h; + uint32_t sbbr23_l; + uint32_t sbbr23_h; + + struct ioc4_serialregs port_0; + struct ioc4_serialregs port_1; + struct ioc4_serialregs port_2; + struct ioc4_serialregs port_3; + struct ioc4_uartregs uart_0; + struct ioc4_uartregs uart_1; + struct ioc4_uartregs uart_2; + struct ioc4_uartregs uart_3; +} ioc4_serial; + +/* UART clock speed */ +#define IOC4_SER_XIN_CLK_66 66666667 +#define IOC4_SER_XIN_CLK_33 33333333 + +#define IOC4_W_IES 0 +#define IOC4_W_IEC 1 + +typedef void ioc4_intr_func_f(void *, uint32_t); +typedef ioc4_intr_func_f *ioc4_intr_func_t; + +static unsigned int Num_of_ioc4_cards; + +/* defining this will get you LOTS of great debug info */ +//#define DEBUG_INTERRUPTS +#define DPRINT_CONFIG(_x...) ; +//#define DPRINT_CONFIG(_x...) printk _x + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +/* number of characters we want to transmit to the lower level at a time */ +#define IOC4_MAX_CHARS 256 +#define IOC4_FIFO_CHARS 255 + +/* Device name we're using */ +#define DEVICE_NAME_RS232 "ttyIOC" +#define DEVICE_NAME_RS422 "ttyAIOC" +#define DEVICE_MAJOR 204 +#define DEVICE_MINOR_RS232 50 +#define DEVICE_MINOR_RS422 84 + + +/* register offsets */ +#define IOC4_SERIAL_OFFSET 0x300 + +/* flags for next_char_state */ +#define NCS_BREAK 0x1 +#define NCS_PARITY 0x2 +#define NCS_FRAMING 0x4 +#define NCS_OVERRUN 0x8 + +/* cause we need SOME parameters ... */ +#define MIN_BAUD_SUPPORTED 1200 +#define MAX_BAUD_SUPPORTED 115200 + +/* protocol types supported */ +#define PROTO_RS232 3 +#define PROTO_RS422 7 + +/* Notification types */ +#define N_DATA_READY 0x01 +#define N_OUTPUT_LOWAT 0x02 +#define N_BREAK 0x04 +#define N_PARITY_ERROR 0x08 +#define N_FRAMING_ERROR 0x10 +#define N_OVERRUN_ERROR 0x20 +#define N_DDCD 0x40 +#define N_DCTS 0x80 + +#define N_ALL_INPUT (N_DATA_READY | N_BREAK | \ + N_PARITY_ERROR | N_FRAMING_ERROR | \ + N_OVERRUN_ERROR | N_DDCD | N_DCTS) + +#define N_ALL_OUTPUT N_OUTPUT_LOWAT + +#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR | N_OVERRUN_ERROR) + +#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK | \ + N_PARITY_ERROR | N_FRAMING_ERROR | \ + N_OVERRUN_ERROR | N_DDCD | N_DCTS) + +#define SER_DIVISOR(_x, clk) (((clk) + (_x) * 8) / ((_x) * 16)) +#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div)) + +/* Some masks */ +#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \ + | UART_LCR_WLEN7 | UART_LCR_WLEN8) +#define LCR_MASK_STOP_BITS (UART_LCR_STOP) + +#define PENDING(_p) (readl(&(_p)->ip_mem->sio_ir.raw) & _p->ip_ienb) +#define READ_SIO_IR(_p) readl(&(_p)->ip_mem->sio_ir.raw) + +/* Default to 4k buffers */ +#ifdef IOC4_1K_BUFFERS +#define RING_BUF_SIZE 1024 +#define IOC4_BUF_SIZE_BIT 0 +#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_1K +#else +#define RING_BUF_SIZE 4096 +#define IOC4_BUF_SIZE_BIT IOC4_SBBR_L_SIZE +#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_4K +#endif + +#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4) + +/* + * This is the entry saved by the driver - one per card + */ + +#define UART_PORT_MIN 0 +#define UART_PORT_RS232 UART_PORT_MIN +#define UART_PORT_RS422 1 +#define UART_PORT_COUNT 2 /* one for each mode */ + +struct ioc4_control { + int ic_irq; + struct { + /* uart ports are allocated here - 1 for rs232, 1 for rs422 */ + struct uart_port icp_uart_port[UART_PORT_COUNT]; + /* Handy reference material */ + struct ioc4_port *icp_port; + } ic_port[IOC4_NUM_SERIAL_PORTS]; + struct ioc4_soft *ic_soft; +}; + +/* + * per-IOC4 data structure + */ +#define MAX_IOC4_INTR_ENTS (8 * sizeof(uint32_t)) +struct ioc4_soft { + struct ioc4_misc_regs __iomem *is_ioc4_misc_addr; + struct ioc4_serial __iomem *is_ioc4_serial_addr; + + /* Each interrupt type has an entry in the array */ + struct ioc4_intr_type { + + /* + * Each in-use entry in this array contains at least + * one nonzero bit in sd_bits; no two entries in this + * array have overlapping sd_bits values. + */ + struct ioc4_intr_info { + uint32_t sd_bits; + ioc4_intr_func_f *sd_intr; + void *sd_info; + } is_intr_info[MAX_IOC4_INTR_ENTS]; + + /* Number of entries active in the above array */ + atomic_t is_num_intrs; + } is_intr_type[IOC4_NUM_INTR_TYPES]; + + /* is_ir_lock must be held while + * modifying sio_ie values, so + * we can be sure that sio_ie is + * not changing when we read it + * along with sio_ir. + */ + spinlock_t is_ir_lock; /* SIO_IE[SC] mod lock */ +}; + +/* Local port info for each IOC4 serial ports */ +struct ioc4_port { + struct uart_port *ip_port; /* current active port ptr */ + /* Ptrs for all ports */ + struct uart_port *ip_all_ports[UART_PORT_COUNT]; + /* Back ptrs for this port */ + struct ioc4_control *ip_control; + struct pci_dev *ip_pdev; + struct ioc4_soft *ip_ioc4_soft; + + /* pci mem addresses */ + struct ioc4_misc_regs __iomem *ip_mem; + struct ioc4_serial __iomem *ip_serial; + struct ioc4_serialregs __iomem *ip_serial_regs; + struct ioc4_uartregs __iomem *ip_uart_regs; + + /* Ring buffer page for this port */ + dma_addr_t ip_dma_ringbuf; + /* vaddr of ring buffer */ + struct ring_buffer *ip_cpu_ringbuf; + + /* Rings for this port */ + struct ring *ip_inring; + struct ring *ip_outring; + + /* Hook to port specific values */ + struct hooks *ip_hooks; + + spinlock_t ip_lock; + + /* Various rx/tx parameters */ + int ip_baud; + int ip_tx_lowat; + int ip_rx_timeout; + + /* Copy of notification bits */ + int ip_notify; + + /* Shadow copies of various registers so we don't need to PIO + * read them constantly + */ + uint32_t ip_ienb; /* Enabled interrupts */ + uint32_t ip_sscr; + uint32_t ip_tx_prod; + uint32_t ip_rx_cons; + int ip_pci_bus_speed; + unsigned char ip_flags; +}; + +/* tx low water mark. We need to notify the driver whenever tx is getting + * close to empty so it can refill the tx buffer and keep things going. + * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll + * have no trouble getting in more chars in time (I certainly hope so). + */ +#define TX_LOWAT_LATENCY 1000 +#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY) +#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ) + +/* Flags per port */ +#define INPUT_HIGH 0x01 +#define DCD_ON 0x02 +#define LOWAT_WRITTEN 0x04 +#define READ_ABORTED 0x08 +#define PORT_ACTIVE 0x10 +#define PORT_INACTIVE 0 /* This is the value when "off" */ + + +/* Since each port has different register offsets and bitmasks + * for everything, we'll store those that we need in tables so we + * don't have to be constantly checking the port we are dealing with. + */ +struct hooks { + uint32_t intr_delta_dcd; + uint32_t intr_delta_cts; + uint32_t intr_tx_mt; + uint32_t intr_rx_timer; + uint32_t intr_rx_high; + uint32_t intr_tx_explicit; + uint32_t intr_dma_error; + uint32_t intr_clear; + uint32_t intr_all; + int rs422_select_pin; +}; + +static struct hooks hooks_array[IOC4_NUM_SERIAL_PORTS] = { + /* Values for port 0 */ + { + IOC4_SIO_IR_S0_DELTA_DCD, IOC4_SIO_IR_S0_DELTA_CTS, + IOC4_SIO_IR_S0_TX_MT, IOC4_SIO_IR_S0_RX_TIMER, + IOC4_SIO_IR_S0_RX_HIGH, IOC4_SIO_IR_S0_TX_EXPLICIT, + IOC4_OTHER_IR_S0_MEMERR, + (IOC4_SIO_IR_S0_TX_MT | IOC4_SIO_IR_S0_RX_FULL | + IOC4_SIO_IR_S0_RX_HIGH | IOC4_SIO_IR_S0_RX_TIMER | + IOC4_SIO_IR_S0_DELTA_DCD | IOC4_SIO_IR_S0_DELTA_CTS | + IOC4_SIO_IR_S0_INT | IOC4_SIO_IR_S0_TX_EXPLICIT), + IOC4_SIO_IR_S0, IOC4_GPPR_UART0_MODESEL_PIN, + }, + + /* Values for port 1 */ + { + IOC4_SIO_IR_S1_DELTA_DCD, IOC4_SIO_IR_S1_DELTA_CTS, + IOC4_SIO_IR_S1_TX_MT, IOC4_SIO_IR_S1_RX_TIMER, + IOC4_SIO_IR_S1_RX_HIGH, IOC4_SIO_IR_S1_TX_EXPLICIT, + IOC4_OTHER_IR_S1_MEMERR, + (IOC4_SIO_IR_S1_TX_MT | IOC4_SIO_IR_S1_RX_FULL | + IOC4_SIO_IR_S1_RX_HIGH | IOC4_SIO_IR_S1_RX_TIMER | + IOC4_SIO_IR_S1_DELTA_DCD | IOC4_SIO_IR_S1_DELTA_CTS | + IOC4_SIO_IR_S1_INT | IOC4_SIO_IR_S1_TX_EXPLICIT), + IOC4_SIO_IR_S1, IOC4_GPPR_UART1_MODESEL_PIN, + }, + + /* Values for port 2 */ + { + IOC4_SIO_IR_S2_DELTA_DCD, IOC4_SIO_IR_S2_DELTA_CTS, + IOC4_SIO_IR_S2_TX_MT, IOC4_SIO_IR_S2_RX_TIMER, + IOC4_SIO_IR_S2_RX_HIGH, IOC4_SIO_IR_S2_TX_EXPLICIT, + IOC4_OTHER_IR_S2_MEMERR, + (IOC4_SIO_IR_S2_TX_MT | IOC4_SIO_IR_S2_RX_FULL | + IOC4_SIO_IR_S2_RX_HIGH | IOC4_SIO_IR_S2_RX_TIMER | + IOC4_SIO_IR_S2_DELTA_DCD | IOC4_SIO_IR_S2_DELTA_CTS | + IOC4_SIO_IR_S2_INT | IOC4_SIO_IR_S2_TX_EXPLICIT), + IOC4_SIO_IR_S2, IOC4_GPPR_UART2_MODESEL_PIN, + }, + + /* Values for port 3 */ + { + IOC4_SIO_IR_S3_DELTA_DCD, IOC4_SIO_IR_S3_DELTA_CTS, + IOC4_SIO_IR_S3_TX_MT, IOC4_SIO_IR_S3_RX_TIMER, + IOC4_SIO_IR_S3_RX_HIGH, IOC4_SIO_IR_S3_TX_EXPLICIT, + IOC4_OTHER_IR_S3_MEMERR, + (IOC4_SIO_IR_S3_TX_MT | IOC4_SIO_IR_S3_RX_FULL | + IOC4_SIO_IR_S3_RX_HIGH | IOC4_SIO_IR_S3_RX_TIMER | + IOC4_SIO_IR_S3_DELTA_DCD | IOC4_SIO_IR_S3_DELTA_CTS | + IOC4_SIO_IR_S3_INT | IOC4_SIO_IR_S3_TX_EXPLICIT), + IOC4_SIO_IR_S3, IOC4_GPPR_UART3_MODESEL_PIN, + } +}; + +/* A ring buffer entry */ +struct ring_entry { + union { + struct { + uint32_t alldata; + uint32_t allsc; + } all; + struct { + char data[4]; /* data bytes */ + char sc[4]; /* status/control */ + } s; + } u; +}; + +/* Test the valid bits in any of the 4 sc chars using "allsc" member */ +#define RING_ANY_VALID \ + ((uint32_t)(IOC4_RXSB_MODEM_VALID | IOC4_RXSB_DATA_VALID) * 0x01010101) + +#define ring_sc u.s.sc +#define ring_data u.s.data +#define ring_allsc u.all.allsc + +/* Number of entries per ring buffer. */ +#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry)) + +/* An individual ring */ +struct ring { + struct ring_entry entries[ENTRIES_PER_RING]; +}; + +/* The whole enchilada */ +struct ring_buffer { + struct ring TX_0_OR_2; + struct ring RX_0_OR_2; + struct ring TX_1_OR_3; + struct ring RX_1_OR_3; +}; + +/* Get a ring from a port struct */ +#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh) + +/* Infinite loop detection. + */ +#define MAXITER 10000000 + +/* Prototypes */ +static void receive_chars(struct uart_port *); +static void handle_intr(void *arg, uint32_t sio_ir); + +/* + * port_is_active - determines if this port is currently active + * @port: ptr to soft struct for this port + * @uart_port: uart port to test for + */ +static inline int port_is_active(struct ioc4_port *port, + struct uart_port *uart_port) +{ + if (port) { + if ((port->ip_flags & PORT_ACTIVE) + && (port->ip_port == uart_port)) + return 1; + } + return 0; +} + + +/** + * write_ireg - write the interrupt regs + * @ioc4_soft: ptr to soft struct for this port + * @val: value to write + * @which: which register + * @type: which ireg set + */ +static inline void +write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type) +{ + struct ioc4_misc_regs __iomem *mem = ioc4_soft->is_ioc4_misc_addr; + unsigned long flags; + + spin_lock_irqsave(&ioc4_soft->is_ir_lock, flags); + + switch (type) { + case IOC4_SIO_INTR_TYPE: + switch (which) { + case IOC4_W_IES: + writel(val, &mem->sio_ies.raw); + break; + + case IOC4_W_IEC: + writel(val, &mem->sio_iec.raw); + break; + } + break; + + case IOC4_OTHER_INTR_TYPE: + switch (which) { + case IOC4_W_IES: + writel(val, &mem->other_ies.raw); + break; + + case IOC4_W_IEC: + writel(val, &mem->other_iec.raw); + break; + } + break; + + default: + break; + } + spin_unlock_irqrestore(&ioc4_soft->is_ir_lock, flags); +} + +/** + * set_baud - Baud rate setting code + * @port: port to set + * @baud: baud rate to use + */ +static int set_baud(struct ioc4_port *port, int baud) +{ + int actual_baud; + int diff; + int lcr; + unsigned short divisor; + struct ioc4_uartregs __iomem *uart; + + divisor = SER_DIVISOR(baud, port->ip_pci_bus_speed); + if (!divisor) + return 1; + actual_baud = DIVISOR_TO_BAUD(divisor, port->ip_pci_bus_speed); + + diff = actual_baud - baud; + if (diff < 0) + diff = -diff; + + /* If we're within 1%, we've found a match */ + if (diff * 100 > actual_baud) + return 1; + + uart = port->ip_uart_regs; + lcr = readb(&uart->i4u_lcr); + writeb(lcr | UART_LCR_DLAB, &uart->i4u_lcr); + writeb((unsigned char)divisor, &uart->i4u_dll); + writeb((unsigned char)(divisor >> 8), &uart->i4u_dlm); + writeb(lcr, &uart->i4u_lcr); + return 0; +} + + +/** + * get_ioc4_port - given a uart port, return the control structure + * @port: uart port + * @set: set this port as current + */ +static struct ioc4_port *get_ioc4_port(struct uart_port *the_port, int set) +{ + struct ioc4_driver_data *idd = dev_get_drvdata(the_port->dev); + struct ioc4_control *control = idd->idd_serial_data; + struct ioc4_port *port; + int port_num, port_type; + + if (control) { + for ( port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; + port_num++ ) { + port = control->ic_port[port_num].icp_port; + if (!port) + continue; + for (port_type = UART_PORT_MIN; + port_type < UART_PORT_COUNT; + port_type++) { + if (the_port == port->ip_all_ports + [port_type]) { + /* set local copy */ + if (set) { + port->ip_port = the_port; + } + return port; + } + } + } + } + return NULL; +} + +/* The IOC4 hardware provides no atomic way to determine if interrupts + * are pending since two reads are required to do so. The handler must + * read the SIO_IR and the SIO_IES, and take the logical and of the + * two. When this value is zero, all interrupts have been serviced and + * the handler may return. + * + * This has the unfortunate "hole" that, if some other CPU or + * some other thread or some higher level interrupt manages to + * modify SIO_IE between our reads of SIO_IR and SIO_IE, we may + * think we have observed SIO_IR&SIO_IE==0 when in fact this + * condition never really occurred. + * + * To solve this, we use a simple spinlock that must be held + * whenever modifying SIO_IE; holding this lock while observing + * both SIO_IR and SIO_IE guarantees that we do not falsely + * conclude that no enabled interrupts are pending. + */ + +static inline uint32_t +pending_intrs(struct ioc4_soft *soft, int type) +{ + struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr; + unsigned long flag; + uint32_t intrs = 0; + + BUG_ON(!((type == IOC4_SIO_INTR_TYPE) + || (type == IOC4_OTHER_INTR_TYPE))); + + spin_lock_irqsave(&soft->is_ir_lock, flag); + + switch (type) { + case IOC4_SIO_INTR_TYPE: + intrs = readl(&mem->sio_ir.raw) & readl(&mem->sio_ies.raw); + break; + + case IOC4_OTHER_INTR_TYPE: + intrs = readl(&mem->other_ir.raw) & readl(&mem->other_ies.raw); + + /* Don't process any ATA interrupte */ + intrs &= ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR); + break; + + default: + break; + } + spin_unlock_irqrestore(&soft->is_ir_lock, flag); + return intrs; +} + +/** + * port_init - Initialize the sio and ioc4 hardware for a given port + * called per port from attach... + * @port: port to initialize + */ +static int inline port_init(struct ioc4_port *port) +{ + uint32_t sio_cr; + struct hooks *hooks = port->ip_hooks; + struct ioc4_uartregs __iomem *uart; + + /* Idle the IOC4 serial interface */ + writel(IOC4_SSCR_RESET, &port->ip_serial_regs->sscr); + + /* Wait until any pending bus activity for this port has ceased */ + do + sio_cr = readl(&port->ip_mem->sio_cr.raw); + while (!(sio_cr & IOC4_SIO_CR_SIO_DIAG_IDLE)); + + /* Finish reset sequence */ + writel(0, &port->ip_serial_regs->sscr); + + /* Once RESET is done, reload cached tx_prod and rx_cons values + * and set rings to empty by making prod == cons + */ + port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; + writel(port->ip_tx_prod, &port->ip_serial_regs->stpir); + port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; + writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir); + + /* Disable interrupts for this 16550 */ + uart = port->ip_uart_regs; + writeb(0, &uart->i4u_lcr); + writeb(0, &uart->i4u_ier); + + /* Set the default baud */ + set_baud(port, port->ip_baud); + + /* Set line control to 8 bits no parity */ + writeb(UART_LCR_WLEN8 | 0, &uart->i4u_lcr); + /* UART_LCR_STOP == 1 stop */ + + /* Enable the FIFOs */ + writeb(UART_FCR_ENABLE_FIFO, &uart->i4u_fcr); + /* then reset 16550 FIFOs */ + writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + &uart->i4u_fcr); + + /* Clear modem control register */ + writeb(0, &uart->i4u_mcr); + + /* Clear deltas in modem status register */ + readb(&uart->i4u_msr); + + /* Only do this once per port pair */ + if (port->ip_hooks == &hooks_array[0] + || port->ip_hooks == &hooks_array[2]) { + unsigned long ring_pci_addr; + uint32_t __iomem *sbbr_l; + uint32_t __iomem *sbbr_h; + + if (port->ip_hooks == &hooks_array[0]) { + sbbr_l = &port->ip_serial->sbbr01_l; + sbbr_h = &port->ip_serial->sbbr01_h; + } else { + sbbr_l = &port->ip_serial->sbbr23_l; + sbbr_h = &port->ip_serial->sbbr23_h; + } + + ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf; + DPRINT_CONFIG(("%s: ring_pci_addr 0x%lx\n", + __func__, ring_pci_addr)); + + writel((unsigned int)((uint64_t)ring_pci_addr >> 32), sbbr_h); + writel((unsigned int)ring_pci_addr | IOC4_BUF_SIZE_BIT, sbbr_l); + } + + /* Set the receive timeout value to 10 msec */ + writel(IOC4_SRTR_HZ / 100, &port->ip_serial_regs->srtr); + + /* Set rx threshold, enable DMA */ + /* Set high water mark at 3/4 of full ring */ + port->ip_sscr = (ENTRIES_PER_RING * 3 / 4); + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + + /* Disable and clear all serial related interrupt bits */ + write_ireg(port->ip_ioc4_soft, hooks->intr_clear, + IOC4_W_IEC, IOC4_SIO_INTR_TYPE); + port->ip_ienb &= ~hooks->intr_clear; + writel(hooks->intr_clear, &port->ip_mem->sio_ir.raw); + return 0; +} + +/** + * handle_dma_error_intr - service any pending DMA error interrupts for the + * given port - 2nd level called via sd_intr + * @arg: handler arg + * @other_ir: ioc4regs + */ +static void handle_dma_error_intr(void *arg, uint32_t other_ir) +{ + struct ioc4_port *port = (struct ioc4_port *)arg; + struct hooks *hooks = port->ip_hooks; + unsigned long flags; + + spin_lock_irqsave(&port->ip_lock, flags); + + /* ACK the interrupt */ + writel(hooks->intr_dma_error, &port->ip_mem->other_ir.raw); + + if (readl(&port->ip_mem->pci_err_addr_l.raw) & IOC4_PCI_ERR_ADDR_VLD) { + printk(KERN_ERR + "PCI error address is 0x%llx, " + "master is serial port %c %s\n", + (((uint64_t)readl(&port->ip_mem->pci_err_addr_h) + << 32) + | readl(&port->ip_mem->pci_err_addr_l.raw)) + & IOC4_PCI_ERR_ADDR_ADDR_MSK, '1' + + ((char)(readl(&port->ip_mem->pci_err_addr_l.raw) & + IOC4_PCI_ERR_ADDR_MST_NUM_MSK) >> 1), + (readl(&port->ip_mem->pci_err_addr_l.raw) + & IOC4_PCI_ERR_ADDR_MST_TYP_MSK) + ? "RX" : "TX"); + + if (readl(&port->ip_mem->pci_err_addr_l.raw) + & IOC4_PCI_ERR_ADDR_MUL_ERR) { + printk(KERN_ERR + "Multiple errors occurred\n"); + } + } + spin_unlock_irqrestore(&port->ip_lock, flags); + + /* Re-enable DMA error interrupts */ + write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, IOC4_W_IES, + IOC4_OTHER_INTR_TYPE); +} + +/** + * intr_connect - interrupt connect function + * @soft: soft struct for this card + * @type: interrupt type + * @intrbits: bit pattern to set + * @intr: handler function + * @info: handler arg + */ +static void +intr_connect(struct ioc4_soft *soft, int type, + uint32_t intrbits, ioc4_intr_func_f * intr, void *info) +{ + int i; + struct ioc4_intr_info *intr_ptr; + + BUG_ON(!((type == IOC4_SIO_INTR_TYPE) + || (type == IOC4_OTHER_INTR_TYPE))); + + i = atomic_inc(&soft-> is_intr_type[type].is_num_intrs) - 1; + BUG_ON(!(i < MAX_IOC4_INTR_ENTS || (printk("i %d\n", i), 0))); + + /* Save off the lower level interrupt handler */ + intr_ptr = &soft->is_intr_type[type].is_intr_info[i]; + intr_ptr->sd_bits = intrbits; + intr_ptr->sd_intr = intr; + intr_ptr->sd_info = info; +} + +/** + * ioc4_intr - Top level IOC4 interrupt handler. + * @irq: irq value + * @arg: handler arg + */ + +static irqreturn_t ioc4_intr(int irq, void *arg) +{ + struct ioc4_soft *soft; + uint32_t this_ir, this_mir; + int xx, num_intrs = 0; + int intr_type; + int handled = 0; + struct ioc4_intr_info *intr_info; + + soft = arg; + for (intr_type = 0; intr_type < IOC4_NUM_INTR_TYPES; intr_type++) { + num_intrs = (int)atomic_read( + &soft->is_intr_type[intr_type].is_num_intrs); + + this_mir = this_ir = pending_intrs(soft, intr_type); + + /* Farm out the interrupt to the various drivers depending on + * which interrupt bits are set. + */ + for (xx = 0; xx < num_intrs; xx++) { + intr_info = &soft->is_intr_type[intr_type].is_intr_info[xx]; + if ((this_mir = this_ir & intr_info->sd_bits)) { + /* Disable owned interrupts, call handler */ + handled++; + write_ireg(soft, intr_info->sd_bits, IOC4_W_IEC, + intr_type); + intr_info->sd_intr(intr_info->sd_info, this_mir); + this_ir &= ~this_mir; + } + } + } +#ifdef DEBUG_INTERRUPTS + { + struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr; + unsigned long flag; + + spin_lock_irqsave(&soft->is_ir_lock, flag); + printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies 0x%x " + "other_ir 0x%x other_ies 0x%x mask 0x%x\n", + __func__, __LINE__, + (void *)mem, readl(&mem->sio_ir.raw), + readl(&mem->sio_ies.raw), + readl(&mem->other_ir.raw), + readl(&mem->other_ies.raw), + IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR); + spin_unlock_irqrestore(&soft->is_ir_lock, flag); + } +#endif + return handled ? IRQ_HANDLED : IRQ_NONE; +} + +/** + * ioc4_attach_local - Device initialization. + * Called at *_attach() time for each + * IOC4 with serial ports in the system. + * @idd: Master module data for this IOC4 + */ +static int inline ioc4_attach_local(struct ioc4_driver_data *idd) +{ + struct ioc4_port *port; + struct ioc4_port *ports[IOC4_NUM_SERIAL_PORTS]; + int port_number; + uint16_t ioc4_revid_min = 62; + uint16_t ioc4_revid; + struct pci_dev *pdev = idd->idd_pdev; + struct ioc4_control* control = idd->idd_serial_data; + struct ioc4_soft *soft = control->ic_soft; + void __iomem *ioc4_misc = idd->idd_misc_regs; + void __iomem *ioc4_serial = soft->is_ioc4_serial_addr; + + /* IOC4 firmware must be at least rev 62 */ + pci_read_config_word(pdev, PCI_COMMAND_SPECIAL, &ioc4_revid); + + printk(KERN_INFO "IOC4 firmware revision %d\n", ioc4_revid); + if (ioc4_revid < ioc4_revid_min) { + printk(KERN_WARNING + "IOC4 serial not supported on firmware rev %d, " + "please upgrade to rev %d or higher\n", + ioc4_revid, ioc4_revid_min); + return -EPERM; + } + BUG_ON(ioc4_misc == NULL); + BUG_ON(ioc4_serial == NULL); + + /* Create port structures for each port */ + for (port_number = 0; port_number < IOC4_NUM_SERIAL_PORTS; + port_number++) { + port = kzalloc(sizeof(struct ioc4_port), GFP_KERNEL); + if (!port) { + printk(KERN_WARNING + "IOC4 serial memory not available for port\n"); + return -ENOMEM; + } + spin_lock_init(&port->ip_lock); + + /* we need to remember the previous ones, to point back to + * them farther down - setting up the ring buffers. + */ + ports[port_number] = port; + + /* Allocate buffers and jumpstart the hardware. */ + control->ic_port[port_number].icp_port = port; + port->ip_ioc4_soft = soft; + port->ip_pdev = pdev; + port->ip_ienb = 0; + /* Use baud rate calculations based on detected PCI + * bus speed. Simply test whether the PCI clock is + * running closer to 66MHz or 33MHz. + */ + if (idd->count_period/IOC4_EXTINT_COUNT_DIVISOR < 20) { + port->ip_pci_bus_speed = IOC4_SER_XIN_CLK_66; + } else { + port->ip_pci_bus_speed = IOC4_SER_XIN_CLK_33; + } + port->ip_baud = 9600; + port->ip_control = control; + port->ip_mem = ioc4_misc; + port->ip_serial = ioc4_serial; + + /* point to the right hook */ + port->ip_hooks = &hooks_array[port_number]; + + /* Get direct hooks to the serial regs and uart regs + * for this port + */ + switch (port_number) { + case 0: + port->ip_serial_regs = &(port->ip_serial->port_0); + port->ip_uart_regs = &(port->ip_serial->uart_0); + break; + case 1: + port->ip_serial_regs = &(port->ip_serial->port_1); + port->ip_uart_regs = &(port->ip_serial->uart_1); + break; + case 2: + port->ip_serial_regs = &(port->ip_serial->port_2); + port->ip_uart_regs = &(port->ip_serial->uart_2); + break; + default: + case 3: + port->ip_serial_regs = &(port->ip_serial->port_3); + port->ip_uart_regs = &(port->ip_serial->uart_3); + break; + } + + /* ring buffers are 1 to a pair of ports */ + if (port_number && (port_number & 1)) { + /* odd use the evens buffer */ + port->ip_dma_ringbuf = + ports[port_number - 1]->ip_dma_ringbuf; + port->ip_cpu_ringbuf = + ports[port_number - 1]->ip_cpu_ringbuf; + port->ip_inring = RING(port, RX_1_OR_3); + port->ip_outring = RING(port, TX_1_OR_3); + + } else { + if (port->ip_dma_ringbuf == 0) { + port->ip_cpu_ringbuf = pci_alloc_consistent + (pdev, TOTAL_RING_BUF_SIZE, + &port->ip_dma_ringbuf); + + } + BUG_ON(!((((int64_t)port->ip_dma_ringbuf) & + (TOTAL_RING_BUF_SIZE - 1)) == 0)); + DPRINT_CONFIG(("%s : ip_cpu_ringbuf 0x%p " + "ip_dma_ringbuf 0x%p\n", + __func__, + (void *)port->ip_cpu_ringbuf, + (void *)port->ip_dma_ringbuf)); + port->ip_inring = RING(port, RX_0_OR_2); + port->ip_outring = RING(port, TX_0_OR_2); + } + DPRINT_CONFIG(("%s : port %d [addr 0x%p] control 0x%p", + __func__, + port_number, (void *)port, (void *)control)); + DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n", + (void *)port->ip_serial_regs, + (void *)port->ip_uart_regs)); + + /* Initialize the hardware for IOC4 */ + port_init(port); + + DPRINT_CONFIG(("%s: port_number %d port 0x%p inring 0x%p " + "outring 0x%p\n", + __func__, + port_number, (void *)port, + (void *)port->ip_inring, + (void *)port->ip_outring)); + + /* Attach interrupt handlers */ + intr_connect(soft, IOC4_SIO_INTR_TYPE, + GET_SIO_IR(port_number), + handle_intr, port); + + intr_connect(soft, IOC4_OTHER_INTR_TYPE, + GET_OTHER_IR(port_number), + handle_dma_error_intr, port); + } + return 0; +} + +/** + * enable_intrs - enable interrupts + * @port: port to enable + * @mask: mask to use + */ +static void enable_intrs(struct ioc4_port *port, uint32_t mask) +{ + struct hooks *hooks = port->ip_hooks; + + if ((port->ip_ienb & mask) != mask) { + write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IES, + IOC4_SIO_INTR_TYPE); + port->ip_ienb |= mask; + } + + if (port->ip_ienb) + write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, + IOC4_W_IES, IOC4_OTHER_INTR_TYPE); +} + +/** + * local_open - local open a port + * @port: port to open + */ +static inline int local_open(struct ioc4_port *port) +{ + int spiniter = 0; + + port->ip_flags = PORT_ACTIVE; + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while((readl(&port->ip_serial_regs-> sscr) + & IOC4_SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) { + port->ip_flags = PORT_INACTIVE; + return -1; + } + } + } + + /* Reset the input fifo. If the uart received chars while the port + * was closed and DMA is not enabled, the uart may have a bunch of + * chars hanging around in its rx fifo which will not be discarded + * by rclr in the upper layer. We must get rid of them here. + */ + writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR, + &port->ip_uart_regs->i4u_fcr); + + writeb(UART_LCR_WLEN8, &port->ip_uart_regs->i4u_lcr); + /* UART_LCR_STOP == 1 stop */ + + /* Re-enable DMA, set default threshold to intr whenever there is + * data available. + */ + port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD; + port->ip_sscr |= 1; /* default threshold */ + + /* Plug in the new sscr. This implicitly clears the DMA_PAUSE + * flag if it was set above + */ + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + port->ip_tx_lowat = 1; + return 0; +} + +/** + * set_rx_timeout - Set rx timeout and threshold values. + * @port: port to use + * @timeout: timeout value in ticks + */ +static inline int set_rx_timeout(struct ioc4_port *port, int timeout) +{ + int threshold; + + port->ip_rx_timeout = timeout; + + /* Timeout is in ticks. Let's figure out how many chars we + * can receive at the current baud rate in that interval + * and set the rx threshold to that amount. There are 4 chars + * per ring entry, so we'll divide the number of chars that will + * arrive in timeout by 4. + * So .... timeout * baud / 10 / HZ / 4, with HZ = 100. + */ + threshold = timeout * port->ip_baud / 4000; + if (threshold == 0) + threshold = 1; /* otherwise we'll intr all the time! */ + + if ((unsigned)threshold > (unsigned)IOC4_SSCR_RX_THRESHOLD) + return 1; + + port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD; + port->ip_sscr |= threshold; + + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + + /* Now set the rx timeout to the given value + * again timeout * IOC4_SRTR_HZ / HZ + */ + timeout = timeout * IOC4_SRTR_HZ / 100; + if (timeout > IOC4_SRTR_CNT) + timeout = IOC4_SRTR_CNT; + + writel(timeout, &port->ip_serial_regs->srtr); + return 0; +} + +/** + * config_port - config the hardware + * @port: port to config + * @baud: baud rate for the port + * @byte_size: data size + * @stop_bits: number of stop bits + * @parenb: parity enable ? + * @parodd: odd parity ? + */ +static inline int +config_port(struct ioc4_port *port, + int baud, int byte_size, int stop_bits, int parenb, int parodd) +{ + char lcr, sizebits; + int spiniter = 0; + + DPRINT_CONFIG(("%s: baud %d byte_size %d stop %d parenb %d parodd %d\n", + __func__, baud, byte_size, stop_bits, parenb, parodd)); + + if (set_baud(port, baud)) + return 1; + + switch (byte_size) { + case 5: + sizebits = UART_LCR_WLEN5; + break; + case 6: + sizebits = UART_LCR_WLEN6; + break; + case 7: + sizebits = UART_LCR_WLEN7; + break; + case 8: + sizebits = UART_LCR_WLEN8; + break; + default: + return 1; + } + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while((readl(&port->ip_serial_regs->sscr) + & IOC4_SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) + return -1; + } + } + + /* Clear relevant fields in lcr */ + lcr = readb(&port->ip_uart_regs->i4u_lcr); + lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR | + UART_LCR_PARITY | LCR_MASK_STOP_BITS); + + /* Set byte size in lcr */ + lcr |= sizebits; + + /* Set parity */ + if (parenb) { + lcr |= UART_LCR_PARITY; + if (!parodd) + lcr |= UART_LCR_EPAR; + } + + /* Set stop bits */ + if (stop_bits) + lcr |= UART_LCR_STOP /* 2 stop bits */ ; + + writeb(lcr, &port->ip_uart_regs->i4u_lcr); + + /* Re-enable the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + port->ip_baud = baud; + + /* When we get within this number of ring entries of filling the + * entire ring on tx, place an EXPLICIT intr to generate a lowat + * notification when output has drained. + */ + port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4; + if (port->ip_tx_lowat == 0) + port->ip_tx_lowat = 1; + + set_rx_timeout(port, 2); + + return 0; +} + +/** + * do_write - Write bytes to the port. Returns the number of bytes + * actually written. Called from transmit_chars + * @port: port to use + * @buf: the stuff to write + * @len: how many bytes in 'buf' + */ +static inline int do_write(struct ioc4_port *port, char *buf, int len) +{ + int prod_ptr, cons_ptr, total = 0; + struct ring *outring; + struct ring_entry *entry; + struct hooks *hooks = port->ip_hooks; + + BUG_ON(!(len >= 0)); + + prod_ptr = port->ip_tx_prod; + cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; + outring = port->ip_outring; + + /* Maintain a 1-entry red-zone. The ring buffer is full when + * (cons - prod) % ring_size is 1. Rather than do this subtraction + * in the body of the loop, I'll do it now. + */ + cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK; + + /* Stuff the bytes into the output */ + while ((prod_ptr != cons_ptr) && (len > 0)) { + int xx; + + /* Get 4 bytes (one ring entry) at a time */ + entry = (struct ring_entry *)((caddr_t) outring + prod_ptr); + + /* Invalidate all entries */ + entry->ring_allsc = 0; + + /* Copy in some bytes */ + for (xx = 0; (xx < 4) && (len > 0); xx++) { + entry->ring_data[xx] = *buf++; + entry->ring_sc[xx] = IOC4_TXCB_VALID; + len--; + total++; + } + + /* If we are within some small threshold of filling up the + * entire ring buffer, we must place an EXPLICIT intr here + * to generate a lowat interrupt in case we subsequently + * really do fill up the ring and the caller goes to sleep. + * No need to place more than one though. + */ + if (!(port->ip_flags & LOWAT_WRITTEN) && + ((cons_ptr - prod_ptr) & PROD_CONS_MASK) + <= port->ip_tx_lowat + * (int)sizeof(struct ring_entry)) { + port->ip_flags |= LOWAT_WRITTEN; + entry->ring_sc[0] |= IOC4_TXCB_INT_WHEN_DONE; + } + + /* Go on to next entry */ + prod_ptr += sizeof(struct ring_entry); + prod_ptr &= PROD_CONS_MASK; + } + + /* If we sent something, start DMA if necessary */ + if (total > 0 && !(port->ip_sscr & IOC4_SSCR_DMA_EN)) { + port->ip_sscr |= IOC4_SSCR_DMA_EN; + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + + /* Store the new producer pointer. If tx is disabled, we stuff the + * data into the ring buffer, but we don't actually start tx. + */ + if (!uart_tx_stopped(port->ip_port)) { + writel(prod_ptr, &port->ip_serial_regs->stpir); + + /* If we are now transmitting, enable tx_mt interrupt so we + * can disable DMA if necessary when the tx finishes. + */ + if (total > 0) + enable_intrs(port, hooks->intr_tx_mt); + } + port->ip_tx_prod = prod_ptr; + return total; +} + +/** + * disable_intrs - disable interrupts + * @port: port to enable + * @mask: mask to use + */ +static void disable_intrs(struct ioc4_port *port, uint32_t mask) +{ + struct hooks *hooks = port->ip_hooks; + + if (port->ip_ienb & mask) { + write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IEC, + IOC4_SIO_INTR_TYPE); + port->ip_ienb &= ~mask; + } + + if (!port->ip_ienb) + write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, + IOC4_W_IEC, IOC4_OTHER_INTR_TYPE); +} + +/** + * set_notification - Modify event notification + * @port: port to use + * @mask: events mask + * @set_on: set ? + */ +static int set_notification(struct ioc4_port *port, int mask, int set_on) +{ + struct hooks *hooks = port->ip_hooks; + uint32_t intrbits, sscrbits; + + BUG_ON(!mask); + + intrbits = sscrbits = 0; + + if (mask & N_DATA_READY) + intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high); + if (mask & N_OUTPUT_LOWAT) + intrbits |= hooks->intr_tx_explicit; + if (mask & N_DDCD) { + intrbits |= hooks->intr_delta_dcd; + sscrbits |= IOC4_SSCR_RX_RING_DCD; + } + if (mask & N_DCTS) + intrbits |= hooks->intr_delta_cts; + + if (set_on) { + enable_intrs(port, intrbits); + port->ip_notify |= mask; + port->ip_sscr |= sscrbits; + } else { + disable_intrs(port, intrbits); + port->ip_notify &= ~mask; + port->ip_sscr &= ~sscrbits; + } + + /* We require DMA if either DATA_READY or DDCD notification is + * currently requested. If neither of these is requested and + * there is currently no tx in progress, DMA may be disabled. + */ + if (port->ip_notify & (N_DATA_READY | N_DDCD)) + port->ip_sscr |= IOC4_SSCR_DMA_EN; + else if (!(port->ip_ienb & hooks->intr_tx_mt)) + port->ip_sscr &= ~IOC4_SSCR_DMA_EN; + + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + return 0; +} + +/** + * set_mcr - set the master control reg + * @the_port: port to use + * @mask1: mcr mask + * @mask2: shadow mask + */ +static inline int set_mcr(struct uart_port *the_port, + int mask1, int mask2) +{ + struct ioc4_port *port = get_ioc4_port(the_port, 0); + uint32_t shadow; + int spiniter = 0; + char mcr; + + if (!port) + return -1; + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while ((readl(&port->ip_serial_regs->sscr) + & IOC4_SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) + return -1; + } + } + shadow = readl(&port->ip_serial_regs->shadow); + mcr = (shadow & 0xff000000) >> 24; + + /* Set new value */ + mcr |= mask1; + shadow |= mask2; + + writeb(mcr, &port->ip_uart_regs->i4u_mcr); + writel(shadow, &port->ip_serial_regs->shadow); + + /* Re-enable the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + return 0; +} + +/** + * ioc4_set_proto - set the protocol for the port + * @port: port to use + * @proto: protocol to use + */ +static int ioc4_set_proto(struct ioc4_port *port, int proto) +{ + struct hooks *hooks = port->ip_hooks; + + switch (proto) { + case PROTO_RS232: + /* Clear the appropriate GIO pin */ + writel(0, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw)); + break; + + case PROTO_RS422: + /* Set the appropriate GIO pin */ + writel(1, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw)); + break; + + default: + return 1; + } + return 0; +} + +/** + * transmit_chars - upper level write, called with ip_lock + * @the_port: port to write + */ +static void transmit_chars(struct uart_port *the_port) +{ + int xmit_count, tail, head; + int result; + char *start; + struct tty_struct *tty; + struct ioc4_port *port = get_ioc4_port(the_port, 0); + struct uart_state *state; + + if (!the_port) + return; + if (!port) + return; + + state = the_port->state; + tty = state->port.tty; + + if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) { + /* Nothing to do or hw stopped */ + set_notification(port, N_ALL_OUTPUT, 0); + return; + } + + head = state->xmit.head; + tail = state->xmit.tail; + start = (char *)&state->xmit.buf[tail]; + + /* write out all the data or until the end of the buffer */ + xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail); + if (xmit_count > 0) { + result = do_write(port, start, xmit_count); + if (result > 0) { + /* booking */ + xmit_count -= result; + the_port->icount.tx += result; + /* advance the pointers */ + tail += result; + tail &= UART_XMIT_SIZE - 1; + state->xmit.tail = tail; + start = (char *)&state->xmit.buf[tail]; + } + } + if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS) + uart_write_wakeup(the_port); + + if (uart_circ_empty(&state->xmit)) { + set_notification(port, N_OUTPUT_LOWAT, 0); + } else { + set_notification(port, N_OUTPUT_LOWAT, 1); + } +} + +/** + * ioc4_change_speed - change the speed of the port + * @the_port: port to change + * @new_termios: new termios settings + * @old_termios: old termios settings + */ +static void +ioc4_change_speed(struct uart_port *the_port, + struct ktermios *new_termios, struct ktermios *old_termios) +{ + struct ioc4_port *port = get_ioc4_port(the_port, 0); + int baud, bits; + unsigned cflag, iflag; + int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8; + struct uart_state *state = the_port->state; + + cflag = new_termios->c_cflag; + iflag = new_termios->c_iflag; + + switch (cflag & CSIZE) { + case CS5: + new_data = 5; + bits = 7; + break; + case CS6: + new_data = 6; + bits = 8; + break; + case CS7: + new_data = 7; + bits = 9; + break; + case CS8: + new_data = 8; + bits = 10; + break; + default: + /* cuz we always need a default ... */ + new_data = 5; + bits = 7; + break; + } + if (cflag & CSTOPB) { + bits++; + new_stop = 1; + } + if (cflag & PARENB) { + bits++; + new_parity_enable = 1; + if (cflag & PARODD) + new_parity = 1; + } + baud = uart_get_baud_rate(the_port, new_termios, old_termios, + MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED); + DPRINT_CONFIG(("%s: returned baud %d\n", __func__, baud)); + + /* default is 9600 */ + if (!baud) + baud = 9600; + + if (!the_port->fifosize) + the_port->fifosize = IOC4_FIFO_CHARS; + the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10)); + the_port->timeout += HZ / 50; /* Add .02 seconds of slop */ + + the_port->ignore_status_mask = N_ALL_INPUT; + + state->port.tty->low_latency = 1; + + if (iflag & IGNPAR) + the_port->ignore_status_mask &= ~(N_PARITY_ERROR + | N_FRAMING_ERROR); + if (iflag & IGNBRK) { + the_port->ignore_status_mask &= ~N_BREAK; + if (iflag & IGNPAR) + the_port->ignore_status_mask &= ~N_OVERRUN_ERROR; + } + if (!(cflag & CREAD)) { + /* ignore everything */ + the_port->ignore_status_mask &= ~N_DATA_READY; + } + + if (cflag & CRTSCTS) { + port->ip_sscr |= IOC4_SSCR_HFC_EN; + } + else { + port->ip_sscr &= ~IOC4_SSCR_HFC_EN; + } + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + + /* Set the configuration and proper notification call */ + DPRINT_CONFIG(("%s : port 0x%p cflag 0%o " + "config_port(baud %d data %d stop %d p enable %d parity %d)," + " notification 0x%x\n", + __func__, (void *)port, cflag, baud, new_data, new_stop, + new_parity_enable, new_parity, the_port->ignore_status_mask)); + + if ((config_port(port, baud, /* baud */ + new_data, /* byte size */ + new_stop, /* stop bits */ + new_parity_enable, /* set parity */ + new_parity)) >= 0) { /* parity 1==odd */ + set_notification(port, the_port->ignore_status_mask, 1); + } +} + +/** + * ic4_startup_local - Start up the serial port - returns >= 0 if no errors + * @the_port: Port to operate on + */ +static inline int ic4_startup_local(struct uart_port *the_port) +{ + struct ioc4_port *port; + struct uart_state *state; + + if (!the_port) + return -1; + + port = get_ioc4_port(the_port, 0); + if (!port) + return -1; + + state = the_port->state; + + local_open(port); + + /* set the protocol - mapbase has the port type */ + ioc4_set_proto(port, the_port->mapbase); + + /* set the speed of the serial port */ + ioc4_change_speed(the_port, state->port.tty->termios, + (struct ktermios *)0); + + return 0; +} + +/* + * ioc4_cb_output_lowat - called when the output low water mark is hit + * @the_port: port to output + */ +static void ioc4_cb_output_lowat(struct uart_port *the_port) +{ + unsigned long pflags; + + /* ip_lock is set on the call here */ + if (the_port) { + spin_lock_irqsave(&the_port->lock, pflags); + transmit_chars(the_port); + spin_unlock_irqrestore(&the_port->lock, pflags); + } +} + +/** + * handle_intr - service any interrupts for the given port - 2nd level + * called via sd_intr + * @arg: handler arg + * @sio_ir: ioc4regs + */ +static void handle_intr(void *arg, uint32_t sio_ir) +{ + struct ioc4_port *port = (struct ioc4_port *)arg; + struct hooks *hooks = port->ip_hooks; + unsigned int rx_high_rd_aborted = 0; + unsigned long flags; + struct uart_port *the_port; + int loop_counter; + + /* Possible race condition here: The tx_mt interrupt bit may be + * cleared without the intervention of the interrupt handler, + * e.g. by a write. If the top level interrupt handler reads a + * tx_mt, then some other processor does a write, starting up + * output, then we come in here, see the tx_mt and stop DMA, the + * output started by the other processor will hang. Thus we can + * only rely on tx_mt being legitimate if it is read while the + * port lock is held. Therefore this bit must be ignored in the + * passed in interrupt mask which was read by the top level + * interrupt handler since the port lock was not held at the time + * it was read. We can only rely on this bit being accurate if it + * is read while the port lock is held. So we'll clear it for now, + * and reload it later once we have the port lock. + */ + sio_ir &= ~(hooks->intr_tx_mt); + + spin_lock_irqsave(&port->ip_lock, flags); + + loop_counter = MAXITER; /* to avoid hangs */ + + do { + uint32_t shadow; + + if ( loop_counter-- <= 0 ) { + printk(KERN_WARNING "IOC4 serial: " + "possible hang condition/" + "port stuck on interrupt.\n"); + break; + } + + /* Handle a DCD change */ + if (sio_ir & hooks->intr_delta_dcd) { + /* ACK the interrupt */ + writel(hooks->intr_delta_dcd, + &port->ip_mem->sio_ir.raw); + + shadow = readl(&port->ip_serial_regs->shadow); + + if ((port->ip_notify & N_DDCD) + && (shadow & IOC4_SHADOW_DCD) + && (port->ip_port)) { + the_port = port->ip_port; + the_port->icount.dcd = 1; + wake_up_interruptible + (&the_port->state->port.delta_msr_wait); + } else if ((port->ip_notify & N_DDCD) + && !(shadow & IOC4_SHADOW_DCD)) { + /* Flag delta DCD/no DCD */ + port->ip_flags |= DCD_ON; + } + } + + /* Handle a CTS change */ + if (sio_ir & hooks->intr_delta_cts) { + /* ACK the interrupt */ + writel(hooks->intr_delta_cts, + &port->ip_mem->sio_ir.raw); + + shadow = readl(&port->ip_serial_regs->shadow); + + if ((port->ip_notify & N_DCTS) + && (port->ip_port)) { + the_port = port->ip_port; + the_port->icount.cts = + (shadow & IOC4_SHADOW_CTS) ? 1 : 0; + wake_up_interruptible + (&the_port->state->port.delta_msr_wait); + } + } + + /* rx timeout interrupt. Must be some data available. Put this + * before the check for rx_high since servicing this condition + * may cause that condition to clear. + */ + if (sio_ir & hooks->intr_rx_timer) { + /* ACK the interrupt */ + writel(hooks->intr_rx_timer, + &port->ip_mem->sio_ir.raw); + + if ((port->ip_notify & N_DATA_READY) + && (port->ip_port)) { + /* ip_lock is set on call here */ + receive_chars(port->ip_port); + } + } + + /* rx high interrupt. Must be after rx_timer. */ + else if (sio_ir & hooks->intr_rx_high) { + /* Data available, notify upper layer */ + if ((port->ip_notify & N_DATA_READY) + && port->ip_port) { + /* ip_lock is set on call here */ + receive_chars(port->ip_port); + } + + /* We can't ACK this interrupt. If receive_chars didn't + * cause the condition to clear, we'll have to disable + * the interrupt until the data is drained. + * If the read was aborted, don't disable the interrupt + * as this may cause us to hang indefinitely. An + * aborted read generally means that this interrupt + * hasn't been delivered to the cpu yet anyway, even + * though we see it as asserted when we read the sio_ir. + */ + if ((sio_ir = PENDING(port)) & hooks->intr_rx_high) { + if ((port->ip_flags & READ_ABORTED) == 0) { + port->ip_ienb &= ~hooks->intr_rx_high; + port->ip_flags |= INPUT_HIGH; + } else { + rx_high_rd_aborted++; + } + } + } + + /* We got a low water interrupt: notify upper layer to + * send more data. Must come before tx_mt since servicing + * this condition may cause that condition to clear. + */ + if (sio_ir & hooks->intr_tx_explicit) { + port->ip_flags &= ~LOWAT_WRITTEN; + + /* ACK the interrupt */ + writel(hooks->intr_tx_explicit, + &port->ip_mem->sio_ir.raw); + + if (port->ip_notify & N_OUTPUT_LOWAT) + ioc4_cb_output_lowat(port->ip_port); + } + + /* Handle tx_mt. Must come after tx_explicit. */ + else if (sio_ir & hooks->intr_tx_mt) { + /* If we are expecting a lowat notification + * and we get to this point it probably means that for + * some reason the tx_explicit didn't work as expected + * (that can legitimately happen if the output buffer is + * filled up in just the right way). + * So send the notification now. + */ + if (port->ip_notify & N_OUTPUT_LOWAT) { + ioc4_cb_output_lowat(port->ip_port); + + /* We need to reload the sio_ir since the lowat + * call may have caused another write to occur, + * clearing the tx_mt condition. + */ + sio_ir = PENDING(port); + } + + /* If the tx_mt condition still persists even after the + * lowat call, we've got some work to do. + */ + if (sio_ir & hooks->intr_tx_mt) { + + /* If we are not currently expecting DMA input, + * and the transmitter has just gone idle, + * there is no longer any reason for DMA, so + * disable it. + */ + if (!(port->ip_notify + & (N_DATA_READY | N_DDCD))) { + BUG_ON(!(port->ip_sscr + & IOC4_SSCR_DMA_EN)); + port->ip_sscr &= ~IOC4_SSCR_DMA_EN; + writel(port->ip_sscr, + &port->ip_serial_regs->sscr); + } + + /* Prevent infinite tx_mt interrupt */ + port->ip_ienb &= ~hooks->intr_tx_mt; + } + } + sio_ir = PENDING(port); + + /* if the read was aborted and only hooks->intr_rx_high, + * clear hooks->intr_rx_high, so we do not loop forever. + */ + + if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) { + sio_ir &= ~hooks->intr_rx_high; + } + } while (sio_ir & hooks->intr_all); + + spin_unlock_irqrestore(&port->ip_lock, flags); + + /* Re-enable interrupts before returning from interrupt handler. + * Getting interrupted here is okay. It'll just v() our semaphore, and + * we'll come through the loop again. + */ + + write_ireg(port->ip_ioc4_soft, port->ip_ienb, IOC4_W_IES, + IOC4_SIO_INTR_TYPE); +} + +/* + * ioc4_cb_post_ncs - called for some basic errors + * @port: port to use + * @ncs: event + */ +static void ioc4_cb_post_ncs(struct uart_port *the_port, int ncs) +{ + struct uart_icount *icount; + + icount = &the_port->icount; + + if (ncs & NCS_BREAK) + icount->brk++; + if (ncs & NCS_FRAMING) + icount->frame++; + if (ncs & NCS_OVERRUN) + icount->overrun++; + if (ncs & NCS_PARITY) + icount->parity++; +} + +/** + * do_read - Read in bytes from the port. Return the number of bytes + * actually read. + * @the_port: port to use + * @buf: place to put the stuff we read + * @len: how big 'buf' is + */ + +static inline int do_read(struct uart_port *the_port, unsigned char *buf, + int len) +{ + int prod_ptr, cons_ptr, total; + struct ioc4_port *port = get_ioc4_port(the_port, 0); + struct ring *inring; + struct ring_entry *entry; + struct hooks *hooks = port->ip_hooks; + int byte_num; + char *sc; + int loop_counter; + + BUG_ON(!(len >= 0)); + BUG_ON(!port); + + /* There is a nasty timing issue in the IOC4. When the rx_timer + * expires or the rx_high condition arises, we take an interrupt. + * At some point while servicing the interrupt, we read bytes from + * the ring buffer and re-arm the rx_timer. However the rx_timer is + * not started until the first byte is received *after* it is armed, + * and any bytes pending in the rx construction buffers are not drained + * to memory until either there are 4 bytes available or the rx_timer + * expires. This leads to a potential situation where data is left + * in the construction buffers forever - 1 to 3 bytes were received + * after the interrupt was generated but before the rx_timer was + * re-armed. At that point as long as no subsequent bytes are received + * the timer will never be started and the bytes will remain in the + * construction buffer forever. The solution is to execute a DRAIN + * command after rearming the timer. This way any bytes received before + * the DRAIN will be drained to memory, and any bytes received after + * the DRAIN will start the TIMER and be drained when it expires. + * Luckily, this only needs to be done when the DMA buffer is empty + * since there is no requirement that this function return all + * available data as long as it returns some. + */ + /* Re-arm the timer */ + writel(port->ip_rx_cons | IOC4_SRCIR_ARM, &port->ip_serial_regs->srcir); + + prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; + cons_ptr = port->ip_rx_cons; + + if (prod_ptr == cons_ptr) { + int reset_dma = 0; + + /* Input buffer appears empty, do a flush. */ + + /* DMA must be enabled for this to work. */ + if (!(port->ip_sscr & IOC4_SSCR_DMA_EN)) { + port->ip_sscr |= IOC4_SSCR_DMA_EN; + reset_dma = 1; + } + + /* Potential race condition: we must reload the srpir after + * issuing the drain command, otherwise we could think the rx + * buffer is empty, then take a very long interrupt, and when + * we come back it's full and we wait forever for the drain to + * complete. + */ + writel(port->ip_sscr | IOC4_SSCR_RX_DRAIN, + &port->ip_serial_regs->sscr); + prod_ptr = readl(&port->ip_serial_regs->srpir) + & PROD_CONS_MASK; + + /* We must not wait for the DRAIN to complete unless there are + * at least 8 bytes (2 ring entries) available to receive the + * data otherwise the DRAIN will never complete and we'll + * deadlock here. + * In fact, to make things easier, I'll just ignore the flush if + * there is any data at all now available. + */ + if (prod_ptr == cons_ptr) { + loop_counter = 0; + while (readl(&port->ip_serial_regs->sscr) & + IOC4_SSCR_RX_DRAIN) { + loop_counter++; + if (loop_counter > MAXITER) + return -1; + } + + /* SIGH. We have to reload the prod_ptr *again* since + * the drain may have caused it to change + */ + prod_ptr = readl(&port->ip_serial_regs->srpir) + & PROD_CONS_MASK; + } + if (reset_dma) { + port->ip_sscr &= ~IOC4_SSCR_DMA_EN; + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + } + inring = port->ip_inring; + port->ip_flags &= ~READ_ABORTED; + + total = 0; + loop_counter = 0xfffff; /* to avoid hangs */ + + /* Grab bytes from the hardware */ + while ((prod_ptr != cons_ptr) && (len > 0)) { + entry = (struct ring_entry *)((caddr_t)inring + cons_ptr); + + if ( loop_counter-- <= 0 ) { + printk(KERN_WARNING "IOC4 serial: " + "possible hang condition/" + "port stuck on read.\n"); + break; + } + + /* According to the producer pointer, this ring entry + * must contain some data. But if the PIO happened faster + * than the DMA, the data may not be available yet, so let's + * wait until it arrives. + */ + if ((entry->ring_allsc & RING_ANY_VALID) == 0) { + /* Indicate the read is aborted so we don't disable + * the interrupt thinking that the consumer is + * congested. + */ + port->ip_flags |= READ_ABORTED; + len = 0; + break; + } + + /* Load the bytes/status out of the ring entry */ + for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) { + sc = &(entry->ring_sc[byte_num]); + + /* Check for change in modem state or overrun */ + if ((*sc & IOC4_RXSB_MODEM_VALID) + && (port->ip_notify & N_DDCD)) { + /* Notify upper layer if DCD dropped */ + + if ((port->ip_flags & DCD_ON) + && !(*sc & IOC4_RXSB_DCD)) { + + /* If we have already copied some data, + * return it. We'll pick up the carrier + * drop on the next pass. That way we + * don't throw away the data that has + * already been copied back to + * the caller's buffer. + */ + if (total > 0) { + len = 0; + break; + } + port->ip_flags &= ~DCD_ON; + + /* Turn off this notification so the + * carrier drop protocol won't see it + * again when it does a read. + */ + *sc &= ~IOC4_RXSB_MODEM_VALID; + + /* To keep things consistent, we need + * to update the consumer pointer so + * the next reader won't come in and + * try to read the same ring entries + * again. This must be done here before + * the dcd change. + */ + + if ((entry->ring_allsc & RING_ANY_VALID) + == 0) { + cons_ptr += (int)sizeof + (struct ring_entry); + cons_ptr &= PROD_CONS_MASK; + } + writel(cons_ptr, + &port->ip_serial_regs->srcir); + port->ip_rx_cons = cons_ptr; + + /* Notify upper layer of carrier drop */ + if ((port->ip_notify & N_DDCD) + && port->ip_port) { + the_port->icount.dcd = 0; + wake_up_interruptible + (&the_port->state-> + port.delta_msr_wait); + } + + /* If we had any data to return, we + * would have returned it above. + */ + return 0; + } + } + if (*sc & IOC4_RXSB_MODEM_VALID) { + /* Notify that an input overrun occurred */ + if ((*sc & IOC4_RXSB_OVERRUN) + && (port->ip_notify & N_OVERRUN_ERROR)) { + ioc4_cb_post_ncs(the_port, NCS_OVERRUN); + } + /* Don't look at this byte again */ + *sc &= ~IOC4_RXSB_MODEM_VALID; + } + + /* Check for valid data or RX errors */ + if ((*sc & IOC4_RXSB_DATA_VALID) && + ((*sc & (IOC4_RXSB_PAR_ERR + | IOC4_RXSB_FRAME_ERR + | IOC4_RXSB_BREAK)) + && (port->ip_notify & (N_PARITY_ERROR + | N_FRAMING_ERROR + | N_BREAK)))) { + /* There is an error condition on the next byte. + * If we have already transferred some bytes, + * we'll stop here. Otherwise if this is the + * first byte to be read, we'll just transfer + * it alone after notifying the + * upper layer of its status. + */ + if (total > 0) { + len = 0; + break; + } else { + if ((*sc & IOC4_RXSB_PAR_ERR) && + (port->ip_notify & N_PARITY_ERROR)) { + ioc4_cb_post_ncs(the_port, + NCS_PARITY); + } + if ((*sc & IOC4_RXSB_FRAME_ERR) && + (port->ip_notify & N_FRAMING_ERROR)){ + ioc4_cb_post_ncs(the_port, + NCS_FRAMING); + } + if ((*sc & IOC4_RXSB_BREAK) + && (port->ip_notify & N_BREAK)) { + ioc4_cb_post_ncs + (the_port, + NCS_BREAK); + } + len = 1; + } + } + if (*sc & IOC4_RXSB_DATA_VALID) { + *sc &= ~IOC4_RXSB_DATA_VALID; + *buf = entry->ring_data[byte_num]; + buf++; + len--; + total++; + } + } + + /* If we used up this entry entirely, go on to the next one, + * otherwise we must have run out of buffer space, so + * leave the consumer pointer here for the next read in case + * there are still unread bytes in this entry. + */ + if ((entry->ring_allsc & RING_ANY_VALID) == 0) { + cons_ptr += (int)sizeof(struct ring_entry); + cons_ptr &= PROD_CONS_MASK; + } + } + + /* Update consumer pointer and re-arm rx timer interrupt */ + writel(cons_ptr, &port->ip_serial_regs->srcir); + port->ip_rx_cons = cons_ptr; + + /* If we have now dipped below the rx high water mark and we have + * rx_high interrupt turned off, we can now turn it back on again. + */ + if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr) + & PROD_CONS_MASK) < ((port->ip_sscr & + IOC4_SSCR_RX_THRESHOLD) + << IOC4_PROD_CONS_PTR_OFF))) { + port->ip_flags &= ~INPUT_HIGH; + enable_intrs(port, hooks->intr_rx_high); + } + return total; +} + +/** + * receive_chars - upper level read. Called with ip_lock. + * @the_port: port to read from + */ +static void receive_chars(struct uart_port *the_port) +{ + struct tty_struct *tty; + unsigned char ch[IOC4_MAX_CHARS]; + int read_count, request_count = IOC4_MAX_CHARS; + struct uart_icount *icount; + struct uart_state *state = the_port->state; + unsigned long pflags; + + /* Make sure all the pointers are "good" ones */ + if (!state) + return; + if (!state->port.tty) + return; + + spin_lock_irqsave(&the_port->lock, pflags); + tty = state->port.tty; + + request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS); + + if (request_count > 0) { + icount = &the_port->icount; + read_count = do_read(the_port, ch, request_count); + if (read_count > 0) { + tty_insert_flip_string(tty, ch, read_count); + icount->rx += read_count; + } + } + + spin_unlock_irqrestore(&the_port->lock, pflags); + + tty_flip_buffer_push(tty); +} + +/** + * ic4_type - What type of console are we? + * @port: Port to operate with (we ignore since we only have one port) + * + */ +static const char *ic4_type(struct uart_port *the_port) +{ + if (the_port->mapbase == PROTO_RS232) + return "SGI IOC4 Serial [rs232]"; + else + return "SGI IOC4 Serial [rs422]"; +} + +/** + * ic4_tx_empty - Is the transmitter empty? + * @port: Port to operate on + * + */ +static unsigned int ic4_tx_empty(struct uart_port *the_port) +{ + struct ioc4_port *port = get_ioc4_port(the_port, 0); + unsigned int ret = 0; + + if (port_is_active(port, the_port)) { + if (readl(&port->ip_serial_regs->shadow) & IOC4_SHADOW_TEMT) + ret = TIOCSER_TEMT; + } + return ret; +} + +/** + * ic4_stop_tx - stop the transmitter + * @port: Port to operate on + * + */ +static void ic4_stop_tx(struct uart_port *the_port) +{ + struct ioc4_port *port = get_ioc4_port(the_port, 0); + + if (port_is_active(port, the_port)) + set_notification(port, N_OUTPUT_LOWAT, 0); +} + +/** + * null_void_function - + * @port: Port to operate on + * + */ +static void null_void_function(struct uart_port *the_port) +{ +} + +/** + * ic4_shutdown - shut down the port - free irq and disable + * @port: Port to shut down + * + */ +static void ic4_shutdown(struct uart_port *the_port) +{ + unsigned long port_flags; + struct ioc4_port *port; + struct uart_state *state; + + port = get_ioc4_port(the_port, 0); + if (!port) + return; + + state = the_port->state; + port->ip_port = NULL; + + wake_up_interruptible(&state->port.delta_msr_wait); + + if (state->port.tty) + set_bit(TTY_IO_ERROR, &state->port.tty->flags); + + spin_lock_irqsave(&the_port->lock, port_flags); + set_notification(port, N_ALL, 0); + port->ip_flags = PORT_INACTIVE; + spin_unlock_irqrestore(&the_port->lock, port_flags); +} + +/** + * ic4_set_mctrl - set control lines (dtr, rts, etc) + * @port: Port to operate on + * @mctrl: Lines to set/unset + * + */ +static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl) +{ + unsigned char mcr = 0; + struct ioc4_port *port; + + port = get_ioc4_port(the_port, 0); + if (!port_is_active(port, the_port)) + return; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + set_mcr(the_port, mcr, IOC4_SHADOW_DTR); +} + +/** + * ic4_get_mctrl - get control line info + * @port: port to operate on + * + */ +static unsigned int ic4_get_mctrl(struct uart_port *the_port) +{ + struct ioc4_port *port = get_ioc4_port(the_port, 0); + uint32_t shadow; + unsigned int ret = 0; + + if (!port_is_active(port, the_port)) + return 0; + + shadow = readl(&port->ip_serial_regs->shadow); + if (shadow & IOC4_SHADOW_DCD) + ret |= TIOCM_CAR; + if (shadow & IOC4_SHADOW_DR) + ret |= TIOCM_DSR; + if (shadow & IOC4_SHADOW_CTS) + ret |= TIOCM_CTS; + return ret; +} + +/** + * ic4_start_tx - Start transmitter, flush any output + * @port: Port to operate on + * + */ +static void ic4_start_tx(struct uart_port *the_port) +{ + struct ioc4_port *port = get_ioc4_port(the_port, 0); + + if (port_is_active(port, the_port)) { + set_notification(port, N_OUTPUT_LOWAT, 1); + enable_intrs(port, port->ip_hooks->intr_tx_mt); + } +} + +/** + * ic4_break_ctl - handle breaks + * @port: Port to operate on + * @break_state: Break state + * + */ +static void ic4_break_ctl(struct uart_port *the_port, int break_state) +{ +} + +/** + * ic4_startup - Start up the serial port + * @port: Port to operate on + * + */ +static int ic4_startup(struct uart_port *the_port) +{ + int retval; + struct ioc4_port *port; + struct ioc4_control *control; + struct uart_state *state; + unsigned long port_flags; + + if (!the_port) + return -ENODEV; + port = get_ioc4_port(the_port, 1); + if (!port) + return -ENODEV; + state = the_port->state; + + control = port->ip_control; + if (!control) { + port->ip_port = NULL; + return -ENODEV; + } + + /* Start up the serial port */ + spin_lock_irqsave(&the_port->lock, port_flags); + retval = ic4_startup_local(the_port); + spin_unlock_irqrestore(&the_port->lock, port_flags); + return retval; +} + +/** + * ic4_set_termios - set termios stuff + * @port: port to operate on + * @termios: New settings + * @termios: Old + * + */ +static void +ic4_set_termios(struct uart_port *the_port, + struct ktermios *termios, struct ktermios *old_termios) +{ + unsigned long port_flags; + + spin_lock_irqsave(&the_port->lock, port_flags); + ioc4_change_speed(the_port, termios, old_termios); + spin_unlock_irqrestore(&the_port->lock, port_flags); +} + +/** + * ic4_request_port - allocate resources for port - no op.... + * @port: port to operate on + * + */ +static int ic4_request_port(struct uart_port *port) +{ + return 0; +} + +/* Associate the uart functions above - given to serial core */ + +static struct uart_ops ioc4_ops = { + .tx_empty = ic4_tx_empty, + .set_mctrl = ic4_set_mctrl, + .get_mctrl = ic4_get_mctrl, + .stop_tx = ic4_stop_tx, + .start_tx = ic4_start_tx, + .stop_rx = null_void_function, + .enable_ms = null_void_function, + .break_ctl = ic4_break_ctl, + .startup = ic4_startup, + .shutdown = ic4_shutdown, + .set_termios = ic4_set_termios, + .type = ic4_type, + .release_port = null_void_function, + .request_port = ic4_request_port, +}; + +/* + * Boot-time initialization code + */ + +static struct uart_driver ioc4_uart_rs232 = { + .owner = THIS_MODULE, + .driver_name = "ioc4_serial_rs232", + .dev_name = DEVICE_NAME_RS232, + .major = DEVICE_MAJOR, + .minor = DEVICE_MINOR_RS232, + .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS, +}; + +static struct uart_driver ioc4_uart_rs422 = { + .owner = THIS_MODULE, + .driver_name = "ioc4_serial_rs422", + .dev_name = DEVICE_NAME_RS422, + .major = DEVICE_MAJOR, + .minor = DEVICE_MINOR_RS422, + .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS, +}; + + +/** + * ioc4_serial_remove_one - detach function + * + * @idd: IOC4 master module data for this IOC4 + */ + +static int ioc4_serial_remove_one(struct ioc4_driver_data *idd) +{ + int port_num, port_type; + struct ioc4_control *control; + struct uart_port *the_port; + struct ioc4_port *port; + struct ioc4_soft *soft; + + /* If serial driver did not attach, don't try to detach */ + control = idd->idd_serial_data; + if (!control) + return 0; + + for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) { + for (port_type = UART_PORT_MIN; + port_type < UART_PORT_COUNT; + port_type++) { + the_port = &control->ic_port[port_num].icp_uart_port + [port_type]; + if (the_port) { + switch (port_type) { + case UART_PORT_RS422: + uart_remove_one_port(&ioc4_uart_rs422, + the_port); + break; + default: + case UART_PORT_RS232: + uart_remove_one_port(&ioc4_uart_rs232, + the_port); + break; + } + } + } + port = control->ic_port[port_num].icp_port; + /* we allocate in pairs */ + if (!(port_num & 1) && port) { + pci_free_consistent(port->ip_pdev, + TOTAL_RING_BUF_SIZE, + port->ip_cpu_ringbuf, + port->ip_dma_ringbuf); + kfree(port); + } + } + soft = control->ic_soft; + if (soft) { + free_irq(control->ic_irq, soft); + if (soft->is_ioc4_serial_addr) { + iounmap(soft->is_ioc4_serial_addr); + release_mem_region((unsigned long) + soft->is_ioc4_serial_addr, + sizeof(struct ioc4_serial)); + } + kfree(soft); + } + kfree(control); + idd->idd_serial_data = NULL; + + return 0; +} + + +/** + * ioc4_serial_core_attach_rs232 - register with serial core + * This is done during pci probing + * @pdev: handle for this card + */ +static inline int +ioc4_serial_core_attach(struct pci_dev *pdev, int port_type) +{ + struct ioc4_port *port; + struct uart_port *the_port; + struct ioc4_driver_data *idd = pci_get_drvdata(pdev); + struct ioc4_control *control = idd->idd_serial_data; + int port_num; + int port_type_idx; + struct uart_driver *u_driver; + + + DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n", + __func__, pdev, (void *)control)); + + if (!control) + return -ENODEV; + + port_type_idx = (port_type == PROTO_RS232) ? UART_PORT_RS232 + : UART_PORT_RS422; + + u_driver = (port_type == PROTO_RS232) ? &ioc4_uart_rs232 + : &ioc4_uart_rs422; + + /* once around for each port on this card */ + for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) { + the_port = &control->ic_port[port_num].icp_uart_port + [port_type_idx]; + port = control->ic_port[port_num].icp_port; + port->ip_all_ports[port_type_idx] = the_port; + + DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p : type %s\n", + __func__, (void *)the_port, + (void *)port, + port_type == PROTO_RS232 ? "rs232" : "rs422")); + + /* membase, iobase and mapbase just need to be non-0 */ + the_port->membase = (unsigned char __iomem *)1; + the_port->iobase = (pdev->bus->number << 16) | port_num; + the_port->line = (Num_of_ioc4_cards << 2) | port_num; + the_port->mapbase = port_type; + the_port->type = PORT_16550A; + the_port->fifosize = IOC4_FIFO_CHARS; + the_port->ops = &ioc4_ops; + the_port->irq = control->ic_irq; + the_port->dev = &pdev->dev; + spin_lock_init(&the_port->lock); + if (uart_add_one_port(u_driver, the_port) < 0) { + printk(KERN_WARNING + "%s: unable to add port %d bus %d\n", + __func__, the_port->line, pdev->bus->number); + } else { + DPRINT_CONFIG( + ("IOC4 serial port %d irq = %d, bus %d\n", + the_port->line, the_port->irq, pdev->bus->number)); + } + } + return 0; +} + +/** + * ioc4_serial_attach_one - register attach function + * called per card found from IOC4 master module. + * @idd: Master module data for this IOC4 + */ +int +ioc4_serial_attach_one(struct ioc4_driver_data *idd) +{ + unsigned long tmp_addr1; + struct ioc4_serial __iomem *serial; + struct ioc4_soft *soft; + struct ioc4_control *control; + int ret = 0; + + + DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __func__, idd->idd_pdev, + idd->idd_pci_id)); + + /* PCI-RT does not bring out serial connections. + * Do not attach to this particular IOC4. + */ + if (idd->idd_variant == IOC4_VARIANT_PCI_RT) + return 0; + + /* request serial registers */ + tmp_addr1 = idd->idd_bar0 + IOC4_SERIAL_OFFSET; + + if (!request_mem_region(tmp_addr1, sizeof(struct ioc4_serial), + "sioc4_uart")) { + printk(KERN_WARNING + "ioc4 (%p): unable to get request region for " + "uart space\n", (void *)idd->idd_pdev); + ret = -ENODEV; + goto out1; + } + serial = ioremap(tmp_addr1, sizeof(struct ioc4_serial)); + if (!serial) { + printk(KERN_WARNING + "ioc4 (%p) : unable to remap ioc4 serial register\n", + (void *)idd->idd_pdev); + ret = -ENODEV; + goto out2; + } + DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n", + __func__, (void *)idd->idd_misc_regs, + (void *)serial)); + + /* Get memory for the new card */ + control = kzalloc(sizeof(struct ioc4_control), GFP_KERNEL); + + if (!control) { + printk(KERN_WARNING "ioc4_attach_one" + ": unable to get memory for the IOC4\n"); + ret = -ENOMEM; + goto out2; + } + idd->idd_serial_data = control; + + /* Allocate the soft structure */ + soft = kzalloc(sizeof(struct ioc4_soft), GFP_KERNEL); + if (!soft) { + printk(KERN_WARNING + "ioc4 (%p): unable to get memory for the soft struct\n", + (void *)idd->idd_pdev); + ret = -ENOMEM; + goto out3; + } + + spin_lock_init(&soft->is_ir_lock); + soft->is_ioc4_misc_addr = idd->idd_misc_regs; + soft->is_ioc4_serial_addr = serial; + + /* Init the IOC4 */ + writel(0xf << IOC4_SIO_CR_CMD_PULSE_SHIFT, + &idd->idd_misc_regs->sio_cr.raw); + + /* Enable serial port mode select generic PIO pins as outputs */ + writel(IOC4_GPCR_UART0_MODESEL | IOC4_GPCR_UART1_MODESEL + | IOC4_GPCR_UART2_MODESEL | IOC4_GPCR_UART3_MODESEL, + &idd->idd_misc_regs->gpcr_s.raw); + + /* Clear and disable all serial interrupts */ + write_ireg(soft, ~0, IOC4_W_IEC, IOC4_SIO_INTR_TYPE); + writel(~0, &idd->idd_misc_regs->sio_ir.raw); + write_ireg(soft, IOC4_OTHER_IR_SER_MEMERR, IOC4_W_IEC, + IOC4_OTHER_INTR_TYPE); + writel(IOC4_OTHER_IR_SER_MEMERR, &idd->idd_misc_regs->other_ir.raw); + control->ic_soft = soft; + + /* Hook up interrupt handler */ + if (!request_irq(idd->idd_pdev->irq, ioc4_intr, IRQF_SHARED, + "sgi-ioc4serial", soft)) { + control->ic_irq = idd->idd_pdev->irq; + } else { + printk(KERN_WARNING + "%s : request_irq fails for IRQ 0x%x\n ", + __func__, idd->idd_pdev->irq); + } + ret = ioc4_attach_local(idd); + if (ret) + goto out4; + + /* register port with the serial core - 1 rs232, 1 rs422 */ + + if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS232))) + goto out4; + + if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS422))) + goto out5; + + Num_of_ioc4_cards++; + + return ret; + + /* error exits that give back resources */ +out5: + ioc4_serial_remove_one(idd); +out4: + kfree(soft); +out3: + kfree(control); +out2: + if (serial) + iounmap(serial); + release_mem_region(tmp_addr1, sizeof(struct ioc4_serial)); +out1: + + return ret; +} + + +static struct ioc4_submodule ioc4_serial_submodule = { + .is_name = "IOC4_serial", + .is_owner = THIS_MODULE, + .is_probe = ioc4_serial_attach_one, + .is_remove = ioc4_serial_remove_one, +}; + +/** + * ioc4_serial_init - module init + */ +static int __init ioc4_serial_init(void) +{ + int ret; + + /* register with serial core */ + if ((ret = uart_register_driver(&ioc4_uart_rs232)) < 0) { + printk(KERN_WARNING + "%s: Couldn't register rs232 IOC4 serial driver\n", + __func__); + goto out; + } + if ((ret = uart_register_driver(&ioc4_uart_rs422)) < 0) { + printk(KERN_WARNING + "%s: Couldn't register rs422 IOC4 serial driver\n", + __func__); + goto out_uart_rs232; + } + + /* register with IOC4 main module */ + ret = ioc4_register_submodule(&ioc4_serial_submodule); + if (ret) + goto out_uart_rs422; + return 0; + +out_uart_rs422: + uart_unregister_driver(&ioc4_uart_rs422); +out_uart_rs232: + uart_unregister_driver(&ioc4_uart_rs232); +out: + return ret; +} + +static void __exit ioc4_serial_exit(void) +{ + ioc4_unregister_submodule(&ioc4_serial_submodule); + uart_unregister_driver(&ioc4_uart_rs232); + uart_unregister_driver(&ioc4_uart_rs422); +} + +late_initcall(ioc4_serial_init); /* Call only after tty init is done */ +module_exit(ioc4_serial_exit); + +MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) "); +MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC4 Base-IO Card"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c new file mode 100644 index 000000000000..ebff4a1d4bcc --- /dev/null +++ b/drivers/tty/serial/ip22zilog.c @@ -0,0 +1,1221 @@ +/* + * Driver for Zilog serial chips found on SGI workstations and + * servers. This driver could actually be made more generic. + * + * This is based on the drivers/serial/sunzilog.c code as of 2.6.0-test7 and the + * old drivers/sgi/char/sgiserial.c code which itself is based of the original + * drivers/sbus/char/zs.c code. A lot of code has been simply moved over + * directly from there but much has been rewritten. Credits therefore go out + * to David S. Miller, Eddie C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell + * for their work there. + * + * Copyright (C) 2002 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_SERIAL_IP22_ZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#include "ip22zilog.h" + +/* + * On IP22 we need to delay after register accesses but we do not need to + * flush writes. + */ +#define ZSDELAY() udelay(5) +#define ZSDELAY_LONG() udelay(20) +#define ZS_WSYNC(channel) do { } while (0) + +#define NUM_IP22ZILOG 1 +#define NUM_CHANNELS (NUM_IP22ZILOG * 2) + +#define ZS_CLOCK 3672000 /* Zilog input clock rate. */ +#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */ + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_ip22zilog_port { + struct uart_port port; + + /* IRQ servicing chain. */ + struct uart_ip22zilog_port *next; + + /* Current values of Zilog write registers. */ + unsigned char curregs[NUM_ZSREGS]; + + unsigned int flags; +#define IP22ZILOG_FLAG_IS_CONS 0x00000004 +#define IP22ZILOG_FLAG_IS_KGDB 0x00000008 +#define IP22ZILOG_FLAG_MODEM_STATUS 0x00000010 +#define IP22ZILOG_FLAG_IS_CHANNEL_A 0x00000020 +#define IP22ZILOG_FLAG_REGS_HELD 0x00000040 +#define IP22ZILOG_FLAG_TX_STOPPED 0x00000080 +#define IP22ZILOG_FLAG_TX_ACTIVE 0x00000100 +#define IP22ZILOG_FLAG_RESET_DONE 0x00000200 + + unsigned int tty_break; + + unsigned char parity_mask; + unsigned char prev_status; +}; + +#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel *)((PORT)->membase)) +#define UART_ZILOG(PORT) ((struct uart_ip22zilog_port *)(PORT)) +#define IP22ZILOG_GET_CURR_REG(PORT, REGNUM) \ + (UART_ZILOG(PORT)->curregs[REGNUM]) +#define IP22ZILOG_SET_CURR_REG(PORT, REGNUM, REGVAL) \ + ((UART_ZILOG(PORT)->curregs[REGNUM]) = (REGVAL)) +#define ZS_IS_CONS(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_CONS) +#define ZS_IS_KGDB(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_KGDB) +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & IP22ZILOG_FLAG_MODEM_STATUS) +#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_CHANNEL_A) +#define ZS_REGS_HELD(UP) ((UP)->flags & IP22ZILOG_FLAG_REGS_HELD) +#define ZS_TX_STOPPED(UP) ((UP)->flags & IP22ZILOG_FLAG_TX_STOPPED) +#define ZS_TX_ACTIVE(UP) ((UP)->flags & IP22ZILOG_FLAG_TX_ACTIVE) + +/* Reading and writing Zilog8530 registers. The delays are to make this + * driver work on the IP22 which needs a settling delay after each chip + * register access, other machines handle this in hardware via auxiliary + * flip-flops which implement the settle time we do in software. + * + * The port lock must be held and local IRQs must be disabled + * when {read,write}_zsreg is invoked. + */ +static unsigned char read_zsreg(struct zilog_channel *channel, + unsigned char reg) +{ + unsigned char retval; + + writeb(reg, &channel->control); + ZSDELAY(); + retval = readb(&channel->control); + ZSDELAY(); + + return retval; +} + +static void write_zsreg(struct zilog_channel *channel, + unsigned char reg, unsigned char value) +{ + writeb(reg, &channel->control); + ZSDELAY(); + writeb(value, &channel->control); + ZSDELAY(); +} + +static void ip22zilog_clear_fifo(struct zilog_channel *channel) +{ + int i; + + for (i = 0; i < 32; i++) { + unsigned char regval; + + regval = readb(&channel->control); + ZSDELAY(); + if (regval & Rx_CH_AV) + break; + + regval = read_zsreg(channel, R1); + readb(&channel->data); + ZSDELAY(); + + if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + } +} + +/* This function must only be called when the TX is not busy. The UART + * port lock must be held and local interrupts disabled. + */ +static void __load_zsregs(struct zilog_channel *channel, unsigned char *regs) +{ + int i; + + /* Let pending transmits finish. */ + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + ip22zilog_clear_fifo(channel); + + /* Disable all interrupts. */ + write_zsreg(channel, R1, + regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); + + /* Set parity, sync config, stop bits, and clock divisor. */ + write_zsreg(channel, R4, regs[R4]); + + /* Set misc. TX/RX control bits. */ + write_zsreg(channel, R10, regs[R10]); + + /* Set TX/RX controls sans the enable bits. */ + write_zsreg(channel, R3, regs[R3] & ~RxENAB); + write_zsreg(channel, R5, regs[R5] & ~TxENAB); + + /* Synchronous mode config. */ + write_zsreg(channel, R6, regs[R6]); + write_zsreg(channel, R7, regs[R7]); + + /* Don't mess with the interrupt vector (R2, unused by us) and + * master interrupt control (R9). We make sure this is setup + * properly at probe time then never touch it again. + */ + + /* Disable baud generator. */ + write_zsreg(channel, R14, regs[R14] & ~BRENAB); + + /* Clock mode control. */ + write_zsreg(channel, R11, regs[R11]); + + /* Lower and upper byte of baud rate generator divisor. */ + write_zsreg(channel, R12, regs[R12]); + write_zsreg(channel, R13, regs[R13]); + + /* Now rewrite R14, with BRENAB (if set). */ + write_zsreg(channel, R14, regs[R14]); + + /* External status interrupt control. */ + write_zsreg(channel, R15, regs[R15]); + + /* Reset external status interrupts. */ + write_zsreg(channel, R0, RES_EXT_INT); + write_zsreg(channel, R0, RES_EXT_INT); + + /* Rewrite R3/R5, this time without enables masked. */ + write_zsreg(channel, R3, regs[R3]); + write_zsreg(channel, R5, regs[R5]); + + /* Rewrite R1, this time without IRQ enabled masked. */ + write_zsreg(channel, R1, regs[R1]); +} + +/* Reprogram the Zilog channel HW registers with the copies found in the + * software state struct. If the transmitter is busy, we defer this update + * until the next TX complete interrupt. Else, we do it right now. + * + * The UART port lock must be held and local interrupts disabled. + */ +static void ip22zilog_maybe_update_regs(struct uart_ip22zilog_port *up, + struct zilog_channel *channel) +{ + if (!ZS_REGS_HELD(up)) { + if (ZS_TX_ACTIVE(up)) { + up->flags |= IP22ZILOG_FLAG_REGS_HELD; + } else { + __load_zsregs(channel, up->curregs); + } + } +} + +#define Rx_BRK 0x0100 /* BREAK event software flag. */ +#define Rx_SYS 0x0200 /* SysRq event software flag. */ + +static struct tty_struct *ip22zilog_receive_chars(struct uart_ip22zilog_port *up, + struct zilog_channel *channel) +{ + struct tty_struct *tty; + unsigned char ch, flag; + unsigned int r1; + + tty = NULL; + if (up->port.state != NULL && + up->port.state->port.tty != NULL) + tty = up->port.state->port.tty; + + for (;;) { + ch = readb(&channel->control); + ZSDELAY(); + if (!(ch & Rx_CH_AV)) + break; + + r1 = read_zsreg(channel, R1); + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + + ch = readb(&channel->data); + ZSDELAY(); + + ch &= up->parity_mask; + + /* Handle the null char got when BREAK is removed. */ + if (!ch) + r1 |= up->tty_break; + + /* A real serial line, record the character and status. */ + flag = TTY_NORMAL; + up->port.icount.rx++; + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | Rx_SYS | Rx_BRK)) { + up->tty_break = 0; + + if (r1 & (Rx_SYS | Rx_BRK)) { + up->port.icount.brk++; + if (r1 & Rx_SYS) + continue; + r1 &= ~(PAR_ERR | CRC_ERR); + } + else if (r1 & PAR_ERR) + up->port.icount.parity++; + else if (r1 & CRC_ERR) + up->port.icount.frame++; + if (r1 & Rx_OVR) + up->port.icount.overrun++; + r1 &= up->port.read_status_mask; + if (r1 & Rx_BRK) + flag = TTY_BREAK; + else if (r1 & PAR_ERR) + flag = TTY_PARITY; + else if (r1 & CRC_ERR) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + continue; + + if (tty) + uart_insert_char(&up->port, r1, Rx_OVR, ch, flag); + } + return tty; +} + +static void ip22zilog_status_handle(struct uart_ip22zilog_port *up, + struct zilog_channel *channel) +{ + unsigned char status; + + status = readb(&channel->control); + ZSDELAY(); + + writeb(RES_EXT_INT, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (up->curregs[R15] & BRKIE) { + if ((status & BRK_ABRT) && !(up->prev_status & BRK_ABRT)) { + if (uart_handle_break(&up->port)) + up->tty_break = Rx_SYS; + else + up->tty_break = Rx_BRK; + } + } + + if (ZS_WANTS_MODEM_STATUS(up)) { + if (status & SYNC) + up->port.icount.dsr++; + + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. + * But it does not tell us which bit has changed, we have to keep + * track of this ourselves. + */ + if ((status ^ up->prev_status) ^ DCD) + uart_handle_dcd_change(&up->port, + (status & DCD)); + if ((status ^ up->prev_status) ^ CTS) + uart_handle_cts_change(&up->port, + (status & CTS)); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); + } + + up->prev_status = status; +} + +static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up, + struct zilog_channel *channel) +{ + struct circ_buf *xmit; + + if (ZS_IS_CONS(up)) { + unsigned char status = readb(&channel->control); + ZSDELAY(); + + /* TX still busy? Just wait for the next TX done interrupt. + * + * It can occur because of how we do serial console writes. It would + * be nice to transmit console writes just like we normally would for + * a TTY line. (ie. buffered and TX interrupt driven). That is not + * easy because console writes cannot sleep. One solution might be + * to poll on enough port->xmit space becomming free. -DaveM + */ + if (!(status & Tx_BUF_EMP)) + return; + } + + up->flags &= ~IP22ZILOG_FLAG_TX_ACTIVE; + + if (ZS_REGS_HELD(up)) { + __load_zsregs(channel, up->curregs); + up->flags &= ~IP22ZILOG_FLAG_REGS_HELD; + } + + if (ZS_TX_STOPPED(up)) { + up->flags &= ~IP22ZILOG_FLAG_TX_STOPPED; + goto ack_tx_int; + } + + if (up->port.x_char) { + up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; + writeb(up->port.x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + + if (up->port.state == NULL) + goto ack_tx_int; + xmit = &up->port.state->xmit; + if (uart_circ_empty(xmit)) + goto ack_tx_int; + if (uart_tx_stopped(&up->port)) + goto ack_tx_int; + + up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; + writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + return; + +ack_tx_int: + writeb(RES_Tx_P, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); +} + +static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id) +{ + struct uart_ip22zilog_port *up = dev_id; + + while (up) { + struct zilog_channel *channel + = ZILOG_CHANNEL_FROM_PORT(&up->port); + struct tty_struct *tty; + unsigned char r3; + + spin_lock(&up->port.lock); + r3 = read_zsreg(channel, R3); + + /* Channel A */ + tty = NULL; + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHARxIP) + tty = ip22zilog_receive_chars(up, channel); + if (r3 & CHAEXT) + ip22zilog_status_handle(up, channel); + if (r3 & CHATxIP) + ip22zilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + if (tty) + tty_flip_buffer_push(tty); + + /* Channel B */ + up = up->next; + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + + spin_lock(&up->port.lock); + tty = NULL; + if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { + writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHBRxIP) + tty = ip22zilog_receive_chars(up, channel); + if (r3 & CHBEXT) + ip22zilog_status_handle(up, channel); + if (r3 & CHBTxIP) + ip22zilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + if (tty) + tty_flip_buffer_push(tty); + + up = up->next; + } + + return IRQ_HANDLED; +} + +/* A convenient way to quickly get R0 status. The caller must _not_ hold the + * port lock, it is acquired here. + */ +static __inline__ unsigned char ip22zilog_read_channel_status(struct uart_port *port) +{ + struct zilog_channel *channel; + unsigned char status; + + channel = ZILOG_CHANNEL_FROM_PORT(port); + status = readb(&channel->control); + ZSDELAY(); + + return status; +} + +/* The port lock is not held. */ +static unsigned int ip22zilog_tx_empty(struct uart_port *port) +{ + unsigned long flags; + unsigned char status; + unsigned int ret; + + spin_lock_irqsave(&port->lock, flags); + + status = ip22zilog_read_channel_status(port); + + spin_unlock_irqrestore(&port->lock, flags); + + if (status & Tx_BUF_EMP) + ret = TIOCSER_TEMT; + else + ret = 0; + + return ret; +} + +/* The port lock is held and interrupts are disabled. */ +static unsigned int ip22zilog_get_mctrl(struct uart_port *port) +{ + unsigned char status; + unsigned int ret; + + status = ip22zilog_read_channel_status(port); + + ret = 0; + if (status & DCD) + ret |= TIOCM_CAR; + if (status & SYNC) + ret |= TIOCM_DSR; + if (status & CTS) + ret |= TIOCM_CTS; + + return ret; +} + +/* The port lock is held and interrupts are disabled. */ +static void ip22zilog_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits; + + set_bits = clear_bits = 0; + + if (mctrl & TIOCM_RTS) + set_bits |= RTS; + else + clear_bits |= RTS; + if (mctrl & TIOCM_DTR) + set_bits |= DTR; + else + clear_bits |= DTR; + + /* NOTE: Not subject to 'transmitter active' rule. */ + up->curregs[R5] |= set_bits; + up->curregs[R5] &= ~clear_bits; + write_zsreg(channel, R5, up->curregs[R5]); +} + +/* The port lock is held and interrupts are disabled. */ +static void ip22zilog_stop_tx(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + + up->flags |= IP22ZILOG_FLAG_TX_STOPPED; +} + +/* The port lock is held and interrupts are disabled. */ +static void ip22zilog_start_tx(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char status; + + up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; + up->flags &= ~IP22ZILOG_FLAG_TX_STOPPED; + + status = readb(&channel->control); + ZSDELAY(); + + /* TX busy? Just wait for the TX done interrupt. */ + if (!(status & Tx_BUF_EMP)) + return; + + /* Send the first character to jump-start the TX done + * IRQ sending engine. + */ + if (port->x_char) { + writeb(port->x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + port->icount.tx++; + port->x_char = 0; + } else { + struct circ_buf *xmit = &port->state->xmit; + + writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + } +} + +/* The port lock is held and interrupts are disabled. */ +static void ip22zilog_stop_rx(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = UART_ZILOG(port); + struct zilog_channel *channel; + + if (ZS_IS_CONS(up)) + return; + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable all RX interrupts. */ + up->curregs[R1] &= ~RxINT_MASK; + ip22zilog_maybe_update_regs(up, channel); +} + +/* The port lock is held. */ +static void ip22zilog_enable_ms(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char new_reg; + + new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE); + if (new_reg != up->curregs[R15]) { + up->curregs[R15] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R15, up->curregs[R15]); + } +} + +/* The port lock is not held. */ +static void ip22zilog_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits, new_reg; + unsigned long flags; + + set_bits = clear_bits = 0; + + if (break_state) + set_bits |= SND_BRK; + else + clear_bits |= SND_BRK; + + spin_lock_irqsave(&port->lock, flags); + + new_reg = (up->curregs[R5] | set_bits) & ~clear_bits; + if (new_reg != up->curregs[R5]) { + up->curregs[R5] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R5, up->curregs[R5]); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void __ip22zilog_reset(struct uart_ip22zilog_port *up) +{ + struct zilog_channel *channel; + int i; + + if (up->flags & IP22ZILOG_FLAG_RESET_DONE) + return; + + /* Let pending transmits finish. */ + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + if (!ZS_IS_CHANNEL_A(up)) { + up++; + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + } + write_zsreg(channel, R9, FHWRES); + ZSDELAY_LONG(); + (void) read_zsreg(channel, R0); + + up->flags |= IP22ZILOG_FLAG_RESET_DONE; + up->next->flags |= IP22ZILOG_FLAG_RESET_DONE; +} + +static void __ip22zilog_startup(struct uart_ip22zilog_port *up) +{ + struct zilog_channel *channel; + + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + + __ip22zilog_reset(up); + + __load_zsregs(channel, up->curregs); + /* set master interrupt enable */ + write_zsreg(channel, R9, up->curregs[R9]); + up->prev_status = readb(&channel->control); + + /* Enable receiver and transmitter. */ + up->curregs[R3] |= RxENAB; + up->curregs[R5] |= TxENAB; + + up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + ip22zilog_maybe_update_regs(up, channel); +} + +static int ip22zilog_startup(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = UART_ZILOG(port); + unsigned long flags; + + if (ZS_IS_CONS(up)) + return 0; + + spin_lock_irqsave(&port->lock, flags); + __ip22zilog_startup(up); + spin_unlock_irqrestore(&port->lock, flags); + return 0; +} + +/* + * The test for ZS_IS_CONS is explained by the following e-mail: + ***** + * From: Russell King + * Date: Sun, 8 Dec 2002 10:18:38 +0000 + * + * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote: + * > I boot my 2.5 boxes using "console=ttyS0,9600" argument, + * > and I noticed that something is not right with reference + * > counting in this case. It seems that when the console + * > is open by kernel initially, this is not accounted + * > as an open, and uart_startup is not called. + * + * That is correct. We are unable to call uart_startup when the serial + * console is initialised because it may need to allocate memory (as + * request_irq does) and the memory allocators may not have been + * initialised. + * + * 1. initialise the port into a state where it can send characters in the + * console write method. + * + * 2. don't do the actual hardware shutdown in your shutdown() method (but + * do the normal software shutdown - ie, free irqs etc) + ***** + */ +static void ip22zilog_shutdown(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = UART_ZILOG(port); + struct zilog_channel *channel; + unsigned long flags; + + if (ZS_IS_CONS(up)) + return; + + spin_lock_irqsave(&port->lock, flags); + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable receiver and transmitter. */ + up->curregs[R3] &= ~RxENAB; + up->curregs[R5] &= ~TxENAB; + + /* Disable all interrupts and BRK assertion. */ + up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + up->curregs[R5] &= ~SND_BRK; + ip22zilog_maybe_update_regs(up, channel); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Shared by TTY driver and serial console setup. The port lock is held + * and local interrupts are disabled. + */ +static void +ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag, + unsigned int iflag, int brg) +{ + + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + + /* Program BAUD and clock source. */ + up->curregs[R4] &= ~XCLK_MASK; + up->curregs[R4] |= X16CLK; + up->curregs[R12] = brg & 0xff; + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRENAB; + + /* Character size, stop bits, and parity. */ + up->curregs[3] &= ~RxN_MASK; + up->curregs[5] &= ~TxN_MASK; + switch (cflag & CSIZE) { + case CS5: + up->curregs[3] |= Rx5; + up->curregs[5] |= Tx5; + up->parity_mask = 0x1f; + break; + case CS6: + up->curregs[3] |= Rx6; + up->curregs[5] |= Tx6; + up->parity_mask = 0x3f; + break; + case CS7: + up->curregs[3] |= Rx7; + up->curregs[5] |= Tx7; + up->parity_mask = 0x7f; + break; + case CS8: + default: + up->curregs[3] |= Rx8; + up->curregs[5] |= Tx8; + up->parity_mask = 0xff; + break; + }; + up->curregs[4] &= ~0x0c; + if (cflag & CSTOPB) + up->curregs[4] |= SB2; + else + up->curregs[4] |= SB1; + if (cflag & PARENB) + up->curregs[4] |= PAR_ENAB; + else + up->curregs[4] &= ~PAR_ENAB; + if (!(cflag & PARODD)) + up->curregs[4] |= PAR_EVEN; + else + up->curregs[4] &= ~PAR_EVEN; + + up->port.read_status_mask = Rx_OVR; + if (iflag & INPCK) + up->port.read_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= BRK_ABRT; + + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= BRK_ABRT; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= Rx_OVR; + } + + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask = 0xff; +} + +/* The port lock is not held. */ +static void +ip22zilog_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + unsigned long flags; + int baud, brg; + + baud = uart_get_baud_rate(port, termios, old, 1200, 76800); + + spin_lock_irqsave(&up->port.lock, flags); + + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + + ip22zilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg); + + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->flags |= IP22ZILOG_FLAG_MODEM_STATUS; + else + up->flags &= ~IP22ZILOG_FLAG_MODEM_STATUS; + + ip22zilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port)); + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static const char *ip22zilog_type(struct uart_port *port) +{ + return "IP22-Zilog"; +} + +/* We do not request/release mappings of the registers here, this + * happens at early serial probe time. + */ +static void ip22zilog_release_port(struct uart_port *port) +{ +} + +static int ip22zilog_request_port(struct uart_port *port) +{ + return 0; +} + +/* These do not need to do anything interesting either. */ +static void ip22zilog_config_port(struct uart_port *port, int flags) +{ +} + +/* We do not support letting the user mess with the divisor, IRQ, etc. */ +static int ip22zilog_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static struct uart_ops ip22zilog_pops = { + .tx_empty = ip22zilog_tx_empty, + .set_mctrl = ip22zilog_set_mctrl, + .get_mctrl = ip22zilog_get_mctrl, + .stop_tx = ip22zilog_stop_tx, + .start_tx = ip22zilog_start_tx, + .stop_rx = ip22zilog_stop_rx, + .enable_ms = ip22zilog_enable_ms, + .break_ctl = ip22zilog_break_ctl, + .startup = ip22zilog_startup, + .shutdown = ip22zilog_shutdown, + .set_termios = ip22zilog_set_termios, + .type = ip22zilog_type, + .release_port = ip22zilog_release_port, + .request_port = ip22zilog_request_port, + .config_port = ip22zilog_config_port, + .verify_port = ip22zilog_verify_port, +}; + +static struct uart_ip22zilog_port *ip22zilog_port_table; +static struct zilog_layout **ip22zilog_chip_regs; + +static struct uart_ip22zilog_port *ip22zilog_irq_chain; +static int zilog_irq = -1; + +static void * __init alloc_one_table(unsigned long size) +{ + return kzalloc(size, GFP_KERNEL); +} + +static void __init ip22zilog_alloc_tables(void) +{ + ip22zilog_port_table = (struct uart_ip22zilog_port *) + alloc_one_table(NUM_CHANNELS * sizeof(struct uart_ip22zilog_port)); + ip22zilog_chip_regs = (struct zilog_layout **) + alloc_one_table(NUM_IP22ZILOG * sizeof(struct zilog_layout *)); + + if (ip22zilog_port_table == NULL || ip22zilog_chip_regs == NULL) { + panic("IP22-Zilog: Cannot allocate IP22-Zilog tables."); + } +} + +/* Get the address of the registers for IP22-Zilog instance CHIP. */ +static struct zilog_layout * __init get_zs(int chip) +{ + unsigned long base; + + if (chip < 0 || chip >= NUM_IP22ZILOG) { + panic("IP22-Zilog: Illegal chip number %d in get_zs.", chip); + } + + /* Not probe-able, hard code it. */ + base = (unsigned long) &sgioc->uart; + + zilog_irq = SGI_SERIAL_IRQ; + request_mem_region(base, 8, "IP22-Zilog"); + + return (struct zilog_layout *) base; +} + +#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ + +#ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE +static void ip22zilog_put_char(struct uart_port *port, int ch) +{ + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + int loops = ZS_PUT_CHAR_MAX_DELAY; + + /* This is a timed polling loop so do not switch the explicit + * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM + */ + do { + unsigned char val = readb(&channel->control); + if (val & Tx_BUF_EMP) { + ZSDELAY(); + break; + } + udelay(5); + } while (--loops); + + writeb(ch, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); +} + +static void +ip22zilog_console_write(struct console *con, const char *s, unsigned int count) +{ + struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index]; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + uart_console_write(&up->port, s, count, ip22zilog_put_char); + udelay(2); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int __init ip22zilog_console_setup(struct console *con, char *options) +{ + struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index]; + unsigned long flags; + int baud = 9600, bits = 8; + int parity = 'n'; + int flow = 'n'; + + up->flags |= IP22ZILOG_FLAG_IS_CONS; + + printk(KERN_INFO "Console: ttyS%d (IP22-Zilog)\n", con->index); + + spin_lock_irqsave(&up->port.lock, flags); + + up->curregs[R15] |= BRKIE; + + __ip22zilog_startup(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + return uart_set_options(&up->port, con, baud, parity, bits, flow); +} + +static struct uart_driver ip22zilog_reg; + +static struct console ip22zilog_console = { + .name = "ttyS", + .write = ip22zilog_console_write, + .device = uart_console_device, + .setup = ip22zilog_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &ip22zilog_reg, +}; +#endif /* CONFIG_SERIAL_IP22_ZILOG_CONSOLE */ + +static struct uart_driver ip22zilog_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = NUM_CHANNELS, +#ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE + .cons = &ip22zilog_console, +#endif +}; + +static void __init ip22zilog_prepare(void) +{ + struct uart_ip22zilog_port *up; + struct zilog_layout *rp; + int channel, chip; + + /* + * Temporary fix. + */ + for (channel = 0; channel < NUM_CHANNELS; channel++) + spin_lock_init(&ip22zilog_port_table[channel].port.lock); + + ip22zilog_irq_chain = &ip22zilog_port_table[NUM_CHANNELS - 1]; + up = &ip22zilog_port_table[0]; + for (channel = NUM_CHANNELS - 1 ; channel > 0; channel--) + up[channel].next = &up[channel - 1]; + up[channel].next = NULL; + + for (chip = 0; chip < NUM_IP22ZILOG; chip++) { + if (!ip22zilog_chip_regs[chip]) { + ip22zilog_chip_regs[chip] = rp = get_zs(chip); + + up[(chip * 2) + 0].port.membase = (char *) &rp->channelB; + up[(chip * 2) + 1].port.membase = (char *) &rp->channelA; + + /* In theory mapbase is the physical address ... */ + up[(chip * 2) + 0].port.mapbase = + (unsigned long) ioremap((unsigned long) &rp->channelB, 8); + up[(chip * 2) + 1].port.mapbase = + (unsigned long) ioremap((unsigned long) &rp->channelA, 8); + } + + /* Channel A */ + up[(chip * 2) + 0].port.iotype = UPIO_MEM; + up[(chip * 2) + 0].port.irq = zilog_irq; + up[(chip * 2) + 0].port.uartclk = ZS_CLOCK; + up[(chip * 2) + 0].port.fifosize = 1; + up[(chip * 2) + 0].port.ops = &ip22zilog_pops; + up[(chip * 2) + 0].port.type = PORT_IP22ZILOG; + up[(chip * 2) + 0].port.flags = 0; + up[(chip * 2) + 0].port.line = (chip * 2) + 0; + up[(chip * 2) + 0].flags = 0; + + /* Channel B */ + up[(chip * 2) + 1].port.iotype = UPIO_MEM; + up[(chip * 2) + 1].port.irq = zilog_irq; + up[(chip * 2) + 1].port.uartclk = ZS_CLOCK; + up[(chip * 2) + 1].port.fifosize = 1; + up[(chip * 2) + 1].port.ops = &ip22zilog_pops; + up[(chip * 2) + 1].port.type = PORT_IP22ZILOG; + up[(chip * 2) + 1].port.line = (chip * 2) + 1; + up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A; + } + + for (channel = 0; channel < NUM_CHANNELS; channel++) { + struct uart_ip22zilog_port *up = &ip22zilog_port_table[channel]; + int brg; + + /* Normal serial TTY. */ + up->parity_mask = 0xff; + up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + up->curregs[R4] = PAR_EVEN | X16CLK | SB1; + up->curregs[R3] = RxENAB | Rx8; + up->curregs[R5] = TxENAB | Tx8; + up->curregs[R9] = NV | MIE; + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + brg = BPS_TO_BRG(9600, ZS_CLOCK / ZS_CLOCK_DIVISOR); + up->curregs[R12] = (brg & 0xff); + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRENAB; + } +} + +static int __init ip22zilog_ports_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: IP22 Zilog driver (%d chips).\n", NUM_IP22ZILOG); + + ip22zilog_prepare(); + + if (request_irq(zilog_irq, ip22zilog_interrupt, 0, + "IP22-Zilog", ip22zilog_irq_chain)) { + panic("IP22-Zilog: Unable to register zs interrupt handler.\n"); + } + + ret = uart_register_driver(&ip22zilog_reg); + if (ret == 0) { + int i; + + for (i = 0; i < NUM_CHANNELS; i++) { + struct uart_ip22zilog_port *up = &ip22zilog_port_table[i]; + + uart_add_one_port(&ip22zilog_reg, &up->port); + } + } + + return ret; +} + +static int __init ip22zilog_init(void) +{ + /* IP22 Zilog setup is hard coded, no probing to do. */ + ip22zilog_alloc_tables(); + ip22zilog_ports_init(); + + return 0; +} + +static void __exit ip22zilog_exit(void) +{ + int i; + struct uart_ip22zilog_port *up; + + for (i = 0; i < NUM_CHANNELS; i++) { + up = &ip22zilog_port_table[i]; + + uart_remove_one_port(&ip22zilog_reg, &up->port); + } + + /* Free IO mem */ + up = &ip22zilog_port_table[0]; + for (i = 0; i < NUM_IP22ZILOG; i++) { + if (up[(i * 2) + 0].port.mapbase) { + iounmap((void*)up[(i * 2) + 0].port.mapbase); + up[(i * 2) + 0].port.mapbase = 0; + } + if (up[(i * 2) + 1].port.mapbase) { + iounmap((void*)up[(i * 2) + 1].port.mapbase); + up[(i * 2) + 1].port.mapbase = 0; + } + } + + uart_unregister_driver(&ip22zilog_reg); +} + +module_init(ip22zilog_init); +module_exit(ip22zilog_exit); + +/* David wrote it but I'm to blame for the bugs ... */ +MODULE_AUTHOR("Ralf Baechle "); +MODULE_DESCRIPTION("SGI Zilog serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/ip22zilog.h b/drivers/tty/serial/ip22zilog.h new file mode 100644 index 000000000000..a59a9a8341d2 --- /dev/null +++ b/drivers/tty/serial/ip22zilog.h @@ -0,0 +1,281 @@ +#ifndef _IP22_ZILOG_H +#define _IP22_ZILOG_H + +#include + +struct zilog_channel { +#ifdef __BIG_ENDIAN + volatile unsigned char unused0[3]; + volatile unsigned char control; + volatile unsigned char unused1[3]; + volatile unsigned char data; +#else /* __LITTLE_ENDIAN */ + volatile unsigned char control; + volatile unsigned char unused0[3]; + volatile unsigned char data; + volatile unsigned char unused1[3]; +#endif +}; + +struct zilog_layout { + struct zilog_channel channelB; + struct zilog_channel channelA; +}; + +#define NUM_ZSREGS 16 + +/* Conversion routines to/from brg time constants from/to bits + * per second. + */ +#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) +#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) + +/* The Zilog register set */ + +#define FLAG 0x7e + +/* Write Register 0 */ +#define R0 0 /* Register selects */ +#define R1 1 +#define R2 2 +#define R3 3 +#define R4 4 +#define R5 5 +#define R6 6 +#define R7 7 +#define R8 8 +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 + +#define NULLCODE 0 /* Null Code */ +#define POINT_HIGH 0x8 /* Select upper half of registers */ +#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ +#define SEND_ABORT 0x18 /* HDLC Abort */ +#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ +#define RES_Tx_P 0x28 /* Reset TxINT Pending */ +#define ERR_RES 0x30 /* Error Reset */ +#define RES_H_IUS 0x38 /* Reset highest IUS */ + +#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ +#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ +#define RES_EOM_L 0xC0 /* Reset EOM latch */ + +/* Write Register 1 */ + +#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ +#define TxINT_ENAB 0x2 /* Tx Int Enable */ +#define PAR_SPEC 0x4 /* Parity is special condition */ + +#define RxINT_DISAB 0 /* Rx Int Disable */ +#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ +#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ +#define INT_ERR_Rx 0x18 /* Int on error only */ +#define RxINT_MASK 0x18 + +#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ +#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ +#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ + +/* Write Register #2 (Interrupt Vector) */ + +/* Write Register 3 */ + +#define RxENAB 0x1 /* Rx Enable */ +#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ +#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ +#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ +#define ENT_HM 0x10 /* Enter Hunt Mode */ +#define AUTO_ENAB 0x20 /* Auto Enables */ +#define Rx5 0x0 /* Rx 5 Bits/Character */ +#define Rx7 0x40 /* Rx 7 Bits/Character */ +#define Rx6 0x80 /* Rx 6 Bits/Character */ +#define Rx8 0xc0 /* Rx 8 Bits/Character */ +#define RxN_MASK 0xc0 + +/* Write Register 4 */ + +#define PAR_ENAB 0x1 /* Parity Enable */ +#define PAR_EVEN 0x2 /* Parity Even/Odd* */ + +#define SYNC_ENAB 0 /* Sync Modes Enable */ +#define SB1 0x4 /* 1 stop bit/char */ +#define SB15 0x8 /* 1.5 stop bits/char */ +#define SB2 0xc /* 2 stop bits/char */ + +#define MONSYNC 0 /* 8 Bit Sync character */ +#define BISYNC 0x10 /* 16 bit sync character */ +#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ +#define EXTSYNC 0x30 /* External Sync Mode */ + +#define X1CLK 0x0 /* x1 clock mode */ +#define X16CLK 0x40 /* x16 clock mode */ +#define X32CLK 0x80 /* x32 clock mode */ +#define X64CLK 0xC0 /* x64 clock mode */ +#define XCLK_MASK 0xC0 + +/* Write Register 5 */ + +#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ +#define RTS 0x2 /* RTS */ +#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ +#define TxENAB 0x8 /* Tx Enable */ +#define SND_BRK 0x10 /* Send Break */ +#define Tx5 0x0 /* Tx 5 bits (or less)/character */ +#define Tx7 0x20 /* Tx 7 bits/character */ +#define Tx6 0x40 /* Tx 6 bits/character */ +#define Tx8 0x60 /* Tx 8 bits/character */ +#define TxN_MASK 0x60 +#define DTR 0x80 /* DTR */ + +/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ + +/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ + +/* Write Register 8 (transmit buffer) */ + +/* Write Register 9 (Master interrupt control) */ +#define VIS 1 /* Vector Includes Status */ +#define NV 2 /* No Vector */ +#define DLC 4 /* Disable Lower Chain */ +#define MIE 8 /* Master Interrupt Enable */ +#define STATHI 0x10 /* Status high */ +#define NORESET 0 /* No reset on write to R9 */ +#define CHRB 0x40 /* Reset channel B */ +#define CHRA 0x80 /* Reset channel A */ +#define FHWRES 0xc0 /* Force hardware reset */ + +/* Write Register 10 (misc control bits) */ +#define BIT6 1 /* 6 bit/8bit sync */ +#define LOOPMODE 2 /* SDLC Loop mode */ +#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ +#define MARKIDLE 8 /* Mark/flag on idle */ +#define GAOP 0x10 /* Go active on poll */ +#define NRZ 0 /* NRZ mode */ +#define NRZI 0x20 /* NRZI mode */ +#define FM1 0x40 /* FM1 (transition = 1) */ +#define FM0 0x60 /* FM0 (transition = 0) */ +#define CRCPS 0x80 /* CRC Preset I/O */ + +/* Write Register 11 (Clock Mode control) */ +#define TRxCXT 0 /* TRxC = Xtal output */ +#define TRxCTC 1 /* TRxC = Transmit clock */ +#define TRxCBR 2 /* TRxC = BR Generator Output */ +#define TRxCDP 3 /* TRxC = DPLL output */ +#define TRxCOI 4 /* TRxC O/I */ +#define TCRTxCP 0 /* Transmit clock = RTxC pin */ +#define TCTRxCP 8 /* Transmit clock = TRxC pin */ +#define TCBR 0x10 /* Transmit clock = BR Generator output */ +#define TCDPLL 0x18 /* Transmit clock = DPLL output */ +#define RCRTxCP 0 /* Receive clock = RTxC pin */ +#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ +#define RCBR 0x40 /* Receive clock = BR Generator output */ +#define RCDPLL 0x60 /* Receive clock = DPLL output */ +#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ + +/* Write Register 12 (lower byte of baud rate generator time constant) */ + +/* Write Register 13 (upper byte of baud rate generator time constant) */ + +/* Write Register 14 (Misc control bits) */ +#define BRENAB 1 /* Baud rate generator enable */ +#define BRSRC 2 /* Baud rate generator source */ +#define DTRREQ 4 /* DTR/Request function */ +#define AUTOECHO 8 /* Auto Echo */ +#define LOOPBAK 0x10 /* Local loopback */ +#define SEARCH 0x20 /* Enter search mode */ +#define RMC 0x40 /* Reset missing clock */ +#define DISDPLL 0x60 /* Disable DPLL */ +#define SSBR 0x80 /* Set DPLL source = BR generator */ +#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ +#define SFMM 0xc0 /* Set FM mode */ +#define SNRZI 0xe0 /* Set NRZI mode */ + +/* Write Register 15 (external/status interrupt control) */ +#define ZCIE 2 /* Zero count IE */ +#define DCDIE 8 /* DCD IE */ +#define SYNCIE 0x10 /* Sync/hunt IE */ +#define CTSIE 0x20 /* CTS IE */ +#define TxUIE 0x40 /* Tx Underrun/EOM IE */ +#define BRKIE 0x80 /* Break/Abort IE */ + + +/* Read Register 0 */ +#define Rx_CH_AV 0x1 /* Rx Character Available */ +#define ZCOUNT 0x2 /* Zero count */ +#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ +#define DCD 0x8 /* DCD */ +#define SYNC 0x10 /* Sync/hunt */ +#define CTS 0x20 /* CTS */ +#define TxEOM 0x40 /* Tx underrun */ +#define BRK_ABRT 0x80 /* Break/Abort */ + +/* Read Register 1 */ +#define ALL_SNT 0x1 /* All sent */ +/* Residue Data for 8 Rx bits/char programmed */ +#define RES3 0x8 /* 0/3 */ +#define RES4 0x4 /* 0/4 */ +#define RES5 0xc /* 0/5 */ +#define RES6 0x2 /* 0/6 */ +#define RES7 0xa /* 0/7 */ +#define RES8 0x6 /* 0/8 */ +#define RES18 0xe /* 1/8 */ +#define RES28 0x0 /* 2/8 */ +/* Special Rx Condition Interrupts */ +#define PAR_ERR 0x10 /* Parity error */ +#define Rx_OVR 0x20 /* Rx Overrun Error */ +#define CRC_ERR 0x40 /* CRC/Framing Error */ +#define END_FR 0x80 /* End of Frame (SDLC) */ + +/* Read Register 2 (channel b only) - Interrupt vector */ +#define CHB_Tx_EMPTY 0x00 +#define CHB_EXT_STAT 0x02 +#define CHB_Rx_AVAIL 0x04 +#define CHB_SPECIAL 0x06 +#define CHA_Tx_EMPTY 0x08 +#define CHA_EXT_STAT 0x0a +#define CHA_Rx_AVAIL 0x0c +#define CHA_SPECIAL 0x0e +#define STATUS_MASK 0x0e + +/* Read Register 3 (interrupt pending register) ch a only */ +#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ +#define CHBTxIP 0x2 /* Channel B Tx IP */ +#define CHBRxIP 0x4 /* Channel B Rx IP */ +#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ +#define CHATxIP 0x10 /* Channel A Tx IP */ +#define CHARxIP 0x20 /* Channel A Rx IP */ + +/* Read Register 8 (receive data register) */ + +/* Read Register 10 (misc status bits) */ +#define ONLOOP 2 /* On loop */ +#define LOOPSEND 0x10 /* Loop sending */ +#define CLK2MIS 0x40 /* Two clocks missing */ +#define CLK1MIS 0x80 /* One clock missing */ + +/* Read Register 12 (lower byte of baud rate generator constant) */ + +/* Read Register 13 (upper byte of baud rate generator constant) */ + +/* Read Register 15 (value of WR 15) */ + +/* Misc macros */ +#define ZS_CLEARERR(channel) do { writeb(ERR_RES, &channel->control); \ + udelay(5); } while(0) + +#define ZS_CLEARSTAT(channel) do { writeb(RES_EXT_INT, &channel->control); \ + udelay(5); } while(0) + +#define ZS_CLEARFIFO(channel) do { readb(&channel->data); \ + udelay(2); \ + readb(&channel->data); \ + udelay(2); \ + readb(&channel->data); \ + udelay(2); } while(0) + +#endif /* _IP22_ZILOG_H */ diff --git a/drivers/tty/serial/jsm/Makefile b/drivers/tty/serial/jsm/Makefile new file mode 100644 index 000000000000..e46b6e0f8b18 --- /dev/null +++ b/drivers/tty/serial/jsm/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for Jasmine adapter +# + +obj-$(CONFIG_SERIAL_JSM) += jsm.o + +jsm-objs := jsm_driver.o jsm_neo.o jsm_tty.o + diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h new file mode 100644 index 000000000000..38a509c684cd --- /dev/null +++ b/drivers/tty/serial/jsm/jsm.h @@ -0,0 +1,388 @@ +/************************************************************************ + * Copyright 2003 Digi International (www.digi.com) + * + * Copyright (C) 2004 IBM Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the + * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * Contact Information: + * Scott H Kilau + * Wendy Xiong + * + ***********************************************************************/ + +#ifndef __JSM_DRIVER_H +#define __JSM_DRIVER_H + +#include +#include /* To pick up the varions Linux types */ +#include +#include +#include + +/* + * Debugging levels can be set using debug insmod variable + * They can also be compiled out completely. + */ +enum { + DBG_INIT = 0x01, + DBG_BASIC = 0x02, + DBG_CORE = 0x04, + DBG_OPEN = 0x08, + DBG_CLOSE = 0x10, + DBG_READ = 0x20, + DBG_WRITE = 0x40, + DBG_IOCTL = 0x80, + DBG_PROC = 0x100, + DBG_PARAM = 0x200, + DBG_PSCAN = 0x400, + DBG_EVENT = 0x800, + DBG_DRAIN = 0x1000, + DBG_MSIGS = 0x2000, + DBG_MGMT = 0x4000, + DBG_INTR = 0x8000, + DBG_CARR = 0x10000, +}; + +#define jsm_printk(nlevel, klevel, pdev, fmt, args...) \ + if ((DBG_##nlevel & jsm_debug)) \ + dev_printk(KERN_##klevel, pdev->dev, fmt, ## args) + +#define MAXLINES 256 +#define MAXPORTS 8 +#define MAX_STOPS_SENT 5 + +/* Board type definitions */ + +#define T_NEO 0000 +#define T_CLASSIC 0001 +#define T_PCIBUS 0400 + +/* Board State Definitions */ + +#define BD_RUNNING 0x0 +#define BD_REASON 0x7f +#define BD_NOTFOUND 0x1 +#define BD_NOIOPORT 0x2 +#define BD_NOMEM 0x3 +#define BD_NOBIOS 0x4 +#define BD_NOFEP 0x5 +#define BD_FAILED 0x6 +#define BD_ALLOCATED 0x7 +#define BD_TRIBOOT 0x8 +#define BD_BADKME 0x80 + + +/* 4 extra for alignment play space */ +#define WRITEBUFLEN ((4096) + 4) +#define MYFLIPLEN N_TTY_BUF_SIZE + +#define JSM_VERSION "jsm: 1.2-1-INKERNEL" +#define JSM_PARTNUM "40002438_A-INKERNEL" + +struct jsm_board; +struct jsm_channel; + +/************************************************************************ + * Per board operations structure * + ************************************************************************/ +struct board_ops { + irq_handler_t intr; + void (*uart_init) (struct jsm_channel *ch); + void (*uart_off) (struct jsm_channel *ch); + void (*param) (struct jsm_channel *ch); + void (*assert_modem_signals) (struct jsm_channel *ch); + void (*flush_uart_write) (struct jsm_channel *ch); + void (*flush_uart_read) (struct jsm_channel *ch); + void (*disable_receiver) (struct jsm_channel *ch); + void (*enable_receiver) (struct jsm_channel *ch); + void (*send_break) (struct jsm_channel *ch); + void (*clear_break) (struct jsm_channel *ch, int); + void (*send_start_character) (struct jsm_channel *ch); + void (*send_stop_character) (struct jsm_channel *ch); + void (*copy_data_from_queue_to_uart) (struct jsm_channel *ch); + u32 (*get_uart_bytes_left) (struct jsm_channel *ch); + void (*send_immediate_char) (struct jsm_channel *ch, unsigned char); +}; + + +/* + * Per-board information + */ +struct jsm_board +{ + int boardnum; /* Board number: 0-32 */ + + int type; /* Type of board */ + u8 rev; /* PCI revision ID */ + struct pci_dev *pci_dev; + u32 maxports; /* MAX ports this board can handle */ + + spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and + * the interrupt routine from each other. + */ + + u32 nasync; /* Number of ports on card */ + + u32 irq; /* Interrupt request number */ + + u64 membase; /* Start of base memory of the card */ + u64 membase_end; /* End of base memory of the card */ + + u8 __iomem *re_map_membase;/* Remapped memory of the card */ + + u64 iobase; /* Start of io base of the card */ + u64 iobase_end; /* End of io base of the card */ + + u32 bd_uart_offset; /* Space between each UART */ + + struct jsm_channel *channels[MAXPORTS]; /* array of pointers to our channels. */ + char *flipbuf; /* Our flip buffer, alloced if board is found */ + + u32 bd_dividend; /* Board/UARTs specific dividend */ + + struct board_ops *bd_ops; + + struct list_head jsm_board_entry; +}; + +/************************************************************************ + * Device flag definitions for ch_flags. + ************************************************************************/ +#define CH_PRON 0x0001 /* Printer on string */ +#define CH_STOP 0x0002 /* Output is stopped */ +#define CH_STOPI 0x0004 /* Input is stopped */ +#define CH_CD 0x0008 /* Carrier is present */ +#define CH_FCAR 0x0010 /* Carrier forced on */ +#define CH_HANGUP 0x0020 /* Hangup received */ + +#define CH_RECEIVER_OFF 0x0040 /* Receiver is off */ +#define CH_OPENING 0x0080 /* Port in fragile open state */ +#define CH_CLOSING 0x0100 /* Port in fragile close state */ +#define CH_FIFO_ENABLED 0x0200 /* Port has FIFOs enabled */ +#define CH_TX_FIFO_EMPTY 0x0400 /* TX Fifo is completely empty */ +#define CH_TX_FIFO_LWM 0x0800 /* TX Fifo is below Low Water */ +#define CH_BREAK_SENDING 0x1000 /* Break is being sent */ +#define CH_LOOPBACK 0x2000 /* Channel is in lookback mode */ +#define CH_FLIPBUF_IN_USE 0x4000 /* Channel's flipbuf is in use */ +#define CH_BAUD0 0x08000 /* Used for checking B0 transitions */ + +/* Our Read/Error/Write queue sizes */ +#define RQUEUEMASK 0x1FFF /* 8 K - 1 */ +#define EQUEUEMASK 0x1FFF /* 8 K - 1 */ +#define WQUEUEMASK 0x0FFF /* 4 K - 1 */ +#define RQUEUESIZE (RQUEUEMASK + 1) +#define EQUEUESIZE RQUEUESIZE +#define WQUEUESIZE (WQUEUEMASK + 1) + + +/************************************************************************ + * Channel information structure. + ************************************************************************/ +struct jsm_channel { + struct uart_port uart_port; + struct jsm_board *ch_bd; /* Board structure pointer */ + + spinlock_t ch_lock; /* provide for serialization */ + wait_queue_head_t ch_flags_wait; + + u32 ch_portnum; /* Port number, 0 offset. */ + u32 ch_open_count; /* open count */ + u32 ch_flags; /* Channel flags */ + + u64 ch_close_delay; /* How long we should drop RTS/DTR for */ + + tcflag_t ch_c_iflag; /* channel iflags */ + tcflag_t ch_c_cflag; /* channel cflags */ + tcflag_t ch_c_oflag; /* channel oflags */ + tcflag_t ch_c_lflag; /* channel lflags */ + u8 ch_stopc; /* Stop character */ + u8 ch_startc; /* Start character */ + + u8 ch_mostat; /* FEP output modem status */ + u8 ch_mistat; /* FEP input modem status */ + + struct neo_uart_struct __iomem *ch_neo_uart; /* Pointer to the "mapped" UART struct */ + u8 ch_cached_lsr; /* Cached value of the LSR register */ + + u8 *ch_rqueue; /* Our read queue buffer - malloc'ed */ + u16 ch_r_head; /* Head location of the read queue */ + u16 ch_r_tail; /* Tail location of the read queue */ + + u8 *ch_equeue; /* Our error queue buffer - malloc'ed */ + u16 ch_e_head; /* Head location of the error queue */ + u16 ch_e_tail; /* Tail location of the error queue */ + + u8 *ch_wqueue; /* Our write queue buffer - malloc'ed */ + u16 ch_w_head; /* Head location of the write queue */ + u16 ch_w_tail; /* Tail location of the write queue */ + + u64 ch_rxcount; /* total of data received so far */ + u64 ch_txcount; /* total of data transmitted so far */ + + u8 ch_r_tlevel; /* Receive Trigger level */ + u8 ch_t_tlevel; /* Transmit Trigger level */ + + u8 ch_r_watermark; /* Receive Watermark */ + + + u32 ch_stops_sent; /* How many times I have sent a stop character + * to try to stop the other guy sending. + */ + u64 ch_err_parity; /* Count of parity errors on channel */ + u64 ch_err_frame; /* Count of framing errors on channel */ + u64 ch_err_break; /* Count of breaks on channel */ + u64 ch_err_overrun; /* Count of overruns on channel */ + + u64 ch_xon_sends; /* Count of xons transmitted */ + u64 ch_xoff_sends; /* Count of xoffs transmitted */ +}; + + +/************************************************************************ + * Per channel/port NEO UART structure * + ************************************************************************ + * Base Structure Entries Usage Meanings to Host * + * * + * W = read write R = read only * + * U = Unused. * + ************************************************************************/ + +struct neo_uart_struct { + u8 txrx; /* WR RHR/THR - Holding Reg */ + u8 ier; /* WR IER - Interrupt Enable Reg */ + u8 isr_fcr; /* WR ISR/FCR - Interrupt Status Reg/Fifo Control Reg */ + u8 lcr; /* WR LCR - Line Control Reg */ + u8 mcr; /* WR MCR - Modem Control Reg */ + u8 lsr; /* WR LSR - Line Status Reg */ + u8 msr; /* WR MSR - Modem Status Reg */ + u8 spr; /* WR SPR - Scratch Pad Reg */ + u8 fctr; /* WR FCTR - Feature Control Reg */ + u8 efr; /* WR EFR - Enhanced Function Reg */ + u8 tfifo; /* WR TXCNT/TXTRG - Transmit FIFO Reg */ + u8 rfifo; /* WR RXCNT/RXTRG - Recieve FIFO Reg */ + u8 xoffchar1; /* WR XOFF 1 - XOff Character 1 Reg */ + u8 xoffchar2; /* WR XOFF 2 - XOff Character 2 Reg */ + u8 xonchar1; /* WR XON 1 - Xon Character 1 Reg */ + u8 xonchar2; /* WR XON 2 - XOn Character 2 Reg */ + + u8 reserved1[0x2ff - 0x200]; /* U Reserved by Exar */ + u8 txrxburst[64]; /* RW 64 bytes of RX/TX FIFO Data */ + u8 reserved2[0x37f - 0x340]; /* U Reserved by Exar */ + u8 rxburst_with_errors[64]; /* R 64 bytes of RX FIFO Data + LSR */ +}; + +/* Where to read the extended interrupt register (32bits instead of 8bits) */ +#define UART_17158_POLL_ADDR_OFFSET 0x80 + +/* + * These are the redefinitions for the FCTR on the XR17C158, since + * Exar made them different than their earlier design. (XR16C854) + */ + +/* These are only applicable when table D is selected */ +#define UART_17158_FCTR_RTS_NODELAY 0x00 +#define UART_17158_FCTR_RTS_4DELAY 0x01 +#define UART_17158_FCTR_RTS_6DELAY 0x02 +#define UART_17158_FCTR_RTS_8DELAY 0x03 +#define UART_17158_FCTR_RTS_12DELAY 0x12 +#define UART_17158_FCTR_RTS_16DELAY 0x05 +#define UART_17158_FCTR_RTS_20DELAY 0x13 +#define UART_17158_FCTR_RTS_24DELAY 0x06 +#define UART_17158_FCTR_RTS_28DELAY 0x14 +#define UART_17158_FCTR_RTS_32DELAY 0x07 +#define UART_17158_FCTR_RTS_36DELAY 0x16 +#define UART_17158_FCTR_RTS_40DELAY 0x08 +#define UART_17158_FCTR_RTS_44DELAY 0x09 +#define UART_17158_FCTR_RTS_48DELAY 0x10 +#define UART_17158_FCTR_RTS_52DELAY 0x11 + +#define UART_17158_FCTR_RTS_IRDA 0x10 +#define UART_17158_FCTR_RS485 0x20 +#define UART_17158_FCTR_TRGA 0x00 +#define UART_17158_FCTR_TRGB 0x40 +#define UART_17158_FCTR_TRGC 0x80 +#define UART_17158_FCTR_TRGD 0xC0 + +/* 17158 trigger table selects.. */ +#define UART_17158_FCTR_BIT6 0x40 +#define UART_17158_FCTR_BIT7 0x80 + +/* 17158 TX/RX memmapped buffer offsets */ +#define UART_17158_RX_FIFOSIZE 64 +#define UART_17158_TX_FIFOSIZE 64 + +/* 17158 Extended IIR's */ +#define UART_17158_IIR_RDI_TIMEOUT 0x0C /* Receiver data TIMEOUT */ +#define UART_17158_IIR_XONXOFF 0x10 /* Received an XON/XOFF char */ +#define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20 /* CTS/DSR or RTS/DTR state change */ +#define UART_17158_IIR_FIFO_ENABLED 0xC0 /* 16550 FIFOs are Enabled */ + +/* + * These are the extended interrupts that get sent + * back to us from the UART's 32bit interrupt register + */ +#define UART_17158_RX_LINE_STATUS 0x1 /* RX Ready */ +#define UART_17158_RXRDY_TIMEOUT 0x2 /* RX Ready Timeout */ +#define UART_17158_TXRDY 0x3 /* TX Ready */ +#define UART_17158_MSR 0x4 /* Modem State Change */ +#define UART_17158_TX_AND_FIFO_CLR 0x40 /* Transmitter Holding Reg Empty */ +#define UART_17158_RX_FIFO_DATA_ERROR 0x80 /* UART detected an RX FIFO Data error */ + +/* + * These are the EXTENDED definitions for the 17C158's Interrupt + * Enable Register. + */ +#define UART_17158_EFR_ECB 0x10 /* Enhanced control bit */ +#define UART_17158_EFR_IXON 0x2 /* Receiver compares Xon1/Xoff1 */ +#define UART_17158_EFR_IXOFF 0x8 /* Transmit Xon1/Xoff1 */ +#define UART_17158_EFR_RTSDTR 0x40 /* Auto RTS/DTR Flow Control Enable */ +#define UART_17158_EFR_CTSDSR 0x80 /* Auto CTS/DSR Flow COntrol Enable */ + +#define UART_17158_XOFF_DETECT 0x1 /* Indicates whether chip saw an incoming XOFF char */ +#define UART_17158_XON_DETECT 0x2 /* Indicates whether chip saw an incoming XON char */ + +#define UART_17158_IER_RSVD1 0x10 /* Reserved by Exar */ +#define UART_17158_IER_XOFF 0x20 /* Xoff Interrupt Enable */ +#define UART_17158_IER_RTSDTR 0x40 /* Output Interrupt Enable */ +#define UART_17158_IER_CTSDSR 0x80 /* Input Interrupt Enable */ + +#define PCI_DEVICE_NEO_2DB9_PCI_NAME "Neo 2 - DB9 Universal PCI" +#define PCI_DEVICE_NEO_2DB9PRI_PCI_NAME "Neo 2 - DB9 Universal PCI - Powered Ring Indicator" +#define PCI_DEVICE_NEO_2RJ45_PCI_NAME "Neo 2 - RJ45 Universal PCI" +#define PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME "Neo 2 - RJ45 Universal PCI - Powered Ring Indicator" +#define PCIE_DEVICE_NEO_IBM_PCI_NAME "Neo 4 - PCI Express - IBM" + +/* + * Our Global Variables. + */ +extern struct uart_driver jsm_uart_driver; +extern struct board_ops jsm_neo_ops; +extern int jsm_debug; + +/************************************************************************* + * + * Prototypes for non-static functions used in more than one module + * + *************************************************************************/ +int jsm_tty_write(struct uart_port *port); +int jsm_tty_init(struct jsm_board *); +int jsm_uart_port_init(struct jsm_board *); +int jsm_remove_uart_port(struct jsm_board *); +void jsm_input(struct jsm_channel *ch); +void jsm_check_queue_flow_control(struct jsm_channel *ch); + +#endif diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c new file mode 100644 index 000000000000..18f548449c63 --- /dev/null +++ b/drivers/tty/serial/jsm/jsm_driver.c @@ -0,0 +1,297 @@ +/************************************************************************ + * Copyright 2003 Digi International (www.digi.com) + * + * Copyright (C) 2004 IBM Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the + * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * Contact Information: + * Scott H Kilau + * Wendy Xiong + * + * + ***********************************************************************/ +#include +#include +#include + +#include "jsm.h" + +MODULE_AUTHOR("Digi International, http://www.digi.com"); +MODULE_DESCRIPTION("Driver for the Digi International " + "Neo PCI based product line"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("jsm"); + +#define JSM_DRIVER_NAME "jsm" +#define NR_PORTS 32 +#define JSM_MINOR_START 0 + +struct uart_driver jsm_uart_driver = { + .owner = THIS_MODULE, + .driver_name = JSM_DRIVER_NAME, + .dev_name = "ttyn", + .major = 0, + .minor = JSM_MINOR_START, + .nr = NR_PORTS, +}; + +static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state); +static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev); +static void jsm_io_resume(struct pci_dev *pdev); + +static struct pci_error_handlers jsm_err_handler = { + .error_detected = jsm_io_error_detected, + .slot_reset = jsm_io_slot_reset, + .resume = jsm_io_resume, +}; + +int jsm_debug; +module_param(jsm_debug, int, 0); +MODULE_PARM_DESC(jsm_debug, "Driver debugging level"); + +static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int rc = 0; + struct jsm_board *brd; + static int adapter_count = 0; + + rc = pci_enable_device(pdev); + if (rc) { + dev_err(&pdev->dev, "Device enable FAILED\n"); + goto out; + } + + rc = pci_request_regions(pdev, "jsm"); + if (rc) { + dev_err(&pdev->dev, "pci_request_region FAILED\n"); + goto out_disable_device; + } + + brd = kzalloc(sizeof(struct jsm_board), GFP_KERNEL); + if (!brd) { + dev_err(&pdev->dev, + "memory allocation for board structure failed\n"); + rc = -ENOMEM; + goto out_release_regions; + } + + /* store the info for the board we've found */ + brd->boardnum = adapter_count++; + brd->pci_dev = pdev; + if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM) + brd->maxports = 4; + else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8) + brd->maxports = 8; + else + brd->maxports = 2; + + spin_lock_init(&brd->bd_intr_lock); + + /* store which revision we have */ + brd->rev = pdev->revision; + + brd->irq = pdev->irq; + + jsm_printk(INIT, INFO, &brd->pci_dev, + "jsm_found_board - NEO adapter\n"); + + /* get the PCI Base Address Registers */ + brd->membase = pci_resource_start(pdev, 0); + brd->membase_end = pci_resource_end(pdev, 0); + + if (brd->membase & 1) + brd->membase &= ~3; + else + brd->membase &= ~15; + + /* Assign the board_ops struct */ + brd->bd_ops = &jsm_neo_ops; + + brd->bd_uart_offset = 0x200; + brd->bd_dividend = 921600; + + brd->re_map_membase = ioremap(brd->membase, 0x1000); + if (!brd->re_map_membase) { + dev_err(&pdev->dev, + "card has no PCI Memory resources, " + "failing board.\n"); + rc = -ENOMEM; + goto out_kfree_brd; + } + + rc = request_irq(brd->irq, brd->bd_ops->intr, + IRQF_SHARED, "JSM", brd); + if (rc) { + printk(KERN_WARNING "Failed to hook IRQ %d\n",brd->irq); + goto out_iounmap; + } + + rc = jsm_tty_init(brd); + if (rc < 0) { + dev_err(&pdev->dev, "Can't init tty devices (%d)\n", rc); + rc = -ENXIO; + goto out_free_irq; + } + + rc = jsm_uart_port_init(brd); + if (rc < 0) { + /* XXX: leaking all resources from jsm_tty_init here! */ + dev_err(&pdev->dev, "Can't init uart port (%d)\n", rc); + rc = -ENXIO; + goto out_free_irq; + } + + /* Log the information about the board */ + dev_info(&pdev->dev, "board %d: Digi Neo (rev %d), irq %d\n", + adapter_count, brd->rev, brd->irq); + + /* + * allocate flip buffer for board. + * + * Okay to malloc with GFP_KERNEL, we are not at interrupt + * context, and there are no locks held. + */ + brd->flipbuf = kzalloc(MYFLIPLEN, GFP_KERNEL); + if (!brd->flipbuf) { + /* XXX: leaking all resources from jsm_tty_init and + jsm_uart_port_init here! */ + dev_err(&pdev->dev, "memory allocation for flipbuf failed\n"); + rc = -ENOMEM; + goto out_free_uart; + } + + pci_set_drvdata(pdev, brd); + pci_save_state(pdev); + + return 0; + out_free_uart: + jsm_remove_uart_port(brd); + out_free_irq: + jsm_remove_uart_port(brd); + free_irq(brd->irq, brd); + out_iounmap: + iounmap(brd->re_map_membase); + out_kfree_brd: + kfree(brd); + out_release_regions: + pci_release_regions(pdev); + out_disable_device: + pci_disable_device(pdev); + out: + return rc; +} + +static void __devexit jsm_remove_one(struct pci_dev *pdev) +{ + struct jsm_board *brd = pci_get_drvdata(pdev); + int i = 0; + + jsm_remove_uart_port(brd); + + free_irq(brd->irq, brd); + iounmap(brd->re_map_membase); + + /* Free all allocated channels structs */ + for (i = 0; i < brd->maxports; i++) { + if (brd->channels[i]) { + kfree(brd->channels[i]->ch_rqueue); + kfree(brd->channels[i]->ch_equeue); + kfree(brd->channels[i]->ch_wqueue); + kfree(brd->channels[i]); + } + } + + pci_release_regions(pdev); + pci_disable_device(pdev); + kfree(brd->flipbuf); + kfree(brd); +} + +static struct pci_device_id jsm_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9), 0, 0, 0 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9PRI), 0, 0, 1 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, jsm_pci_tbl); + +static struct pci_driver jsm_driver = { + .name = "jsm", + .id_table = jsm_pci_tbl, + .probe = jsm_probe_one, + .remove = __devexit_p(jsm_remove_one), + .err_handler = &jsm_err_handler, +}; + +static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct jsm_board *brd = pci_get_drvdata(pdev); + + jsm_remove_uart_port(brd); + + return PCI_ERS_RESULT_NEED_RESET; +} + +static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev) +{ + int rc; + + rc = pci_enable_device(pdev); + + if (rc) + return PCI_ERS_RESULT_DISCONNECT; + + pci_set_master(pdev); + + return PCI_ERS_RESULT_RECOVERED; +} + +static void jsm_io_resume(struct pci_dev *pdev) +{ + struct jsm_board *brd = pci_get_drvdata(pdev); + + pci_restore_state(pdev); + + jsm_uart_port_init(brd); +} + +static int __init jsm_init_module(void) +{ + int rc; + + rc = uart_register_driver(&jsm_uart_driver); + if (!rc) { + rc = pci_register_driver(&jsm_driver); + if (rc) + uart_unregister_driver(&jsm_uart_driver); + } + return rc; +} + +static void __exit jsm_exit_module(void) +{ + pci_unregister_driver(&jsm_driver); + uart_unregister_driver(&jsm_uart_driver); +} + +module_init(jsm_init_module); +module_exit(jsm_exit_module); diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c new file mode 100644 index 000000000000..7960d9633c15 --- /dev/null +++ b/drivers/tty/serial/jsm/jsm_neo.c @@ -0,0 +1,1412 @@ +/************************************************************************ + * Copyright 2003 Digi International (www.digi.com) + * + * Copyright (C) 2004 IBM Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the + * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * Contact Information: + * Scott H Kilau + * Wendy Xiong + * + ***********************************************************************/ +#include /* For udelay */ +#include /* For the various UART offsets */ +#include +#include +#include + +#include "jsm.h" /* Driver main header file */ + +static u32 jsm_offset_table[8] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 }; + +/* + * This function allows calls to ensure that all outstanding + * PCI writes have been completed, by doing a PCI read against + * a non-destructive, read-only location on the Neo card. + * + * In this case, we are reading the DVID (Read-only Device Identification) + * value of the Neo card. + */ +static inline void neo_pci_posting_flush(struct jsm_board *bd) +{ + readb(bd->re_map_membase + 0x8D); +} + +static void neo_set_cts_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n"); + + /* Turn on auto CTS flow control */ + ier |= (UART_17158_IER_CTSDSR); + efr |= (UART_17158_EFR_ECB | UART_17158_EFR_CTSDSR); + + /* Turn off auto Xon flow control */ + efr &= ~(UART_17158_EFR_IXON); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + /* Turn on table D, with 8 char hi/low watermarks */ + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr); + + /* Feed the UART our trigger levels */ + writeb(8, &ch->ch_neo_uart->tfifo); + ch->ch_t_tlevel = 8; + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static void neo_set_rts_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n"); + + /* Turn on auto RTS flow control */ + ier |= (UART_17158_IER_RTSDTR); + efr |= (UART_17158_EFR_ECB | UART_17158_EFR_RTSDTR); + + /* Turn off auto Xoff flow control */ + ier &= ~(UART_17158_IER_XOFF); + efr &= ~(UART_17158_EFR_IXOFF); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr); + ch->ch_r_watermark = 4; + + writeb(56, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 56; + + writeb(ier, &ch->ch_neo_uart->ier); + + /* + * From the Neo UART spec sheet: + * The auto RTS/DTR function must be started by asserting + * RTS/DTR# output pin (MCR bit-0 or 1 to logic 1 after + * it is enabled. + */ + ch->ch_mostat |= (UART_MCR_RTS); +} + + +static void neo_set_ixon_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n"); + + /* Turn off auto CTS flow control */ + ier &= ~(UART_17158_IER_CTSDSR); + efr &= ~(UART_17158_EFR_CTSDSR); + + /* Turn on auto Xon flow control */ + efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXON); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); + ch->ch_r_watermark = 4; + + writeb(32, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 32; + + /* Tell UART what start/stop chars it should be looking for */ + writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); + writeb(0, &ch->ch_neo_uart->xonchar2); + + writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); + writeb(0, &ch->ch_neo_uart->xoffchar2); + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static void neo_set_ixoff_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n"); + + /* Turn off auto RTS flow control */ + ier &= ~(UART_17158_IER_RTSDTR); + efr &= ~(UART_17158_EFR_RTSDTR); + + /* Turn on auto Xoff flow control */ + ier |= (UART_17158_IER_XOFF); + efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXOFF); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + /* Turn on table D, with 8 char hi/low watermarks */ + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); + + writeb(8, &ch->ch_neo_uart->tfifo); + ch->ch_t_tlevel = 8; + + /* Tell UART what start/stop chars it should be looking for */ + writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); + writeb(0, &ch->ch_neo_uart->xonchar2); + + writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); + writeb(0, &ch->ch_neo_uart->xoffchar2); + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static void neo_set_no_input_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n"); + + /* Turn off auto RTS flow control */ + ier &= ~(UART_17158_IER_RTSDTR); + efr &= ~(UART_17158_EFR_RTSDTR); + + /* Turn off auto Xoff flow control */ + ier &= ~(UART_17158_IER_XOFF); + if (ch->ch_c_iflag & IXON) + efr &= ~(UART_17158_EFR_IXOFF); + else + efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXOFF); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + /* Turn on table D, with 8 char hi/low watermarks */ + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); + + ch->ch_r_watermark = 0; + + writeb(16, &ch->ch_neo_uart->tfifo); + ch->ch_t_tlevel = 16; + + writeb(16, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 16; + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static void neo_set_no_output_flow_control(struct jsm_channel *ch) +{ + u8 ier, efr; + ier = readb(&ch->ch_neo_uart->ier); + efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n"); + + /* Turn off auto CTS flow control */ + ier &= ~(UART_17158_IER_CTSDSR); + efr &= ~(UART_17158_EFR_CTSDSR); + + /* Turn off auto Xon flow control */ + if (ch->ch_c_iflag & IXOFF) + efr &= ~(UART_17158_EFR_IXON); + else + efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXON); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + /* Turn on table D, with 8 char hi/low watermarks */ + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); + + ch->ch_r_watermark = 0; + + writeb(16, &ch->ch_neo_uart->tfifo); + ch->ch_t_tlevel = 16; + + writeb(16, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 16; + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static inline void neo_set_new_start_stop_chars(struct jsm_channel *ch) +{ + + /* if hardware flow control is set, then skip this whole thing */ + if (ch->ch_c_cflag & CRTSCTS) + return; + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "start\n"); + + /* Tell UART what start/stop chars it should be looking for */ + writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); + writeb(0, &ch->ch_neo_uart->xonchar2); + + writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); + writeb(0, &ch->ch_neo_uart->xoffchar2); +} + +static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch) +{ + int qleft = 0; + u8 linestatus = 0; + u8 error_mask = 0; + int n = 0; + int total = 0; + u16 head; + u16 tail; + + if (!ch) + return; + + /* cache head and tail of queue */ + head = ch->ch_r_head & RQUEUEMASK; + tail = ch->ch_r_tail & RQUEUEMASK; + + /* Get our cached LSR */ + linestatus = ch->ch_cached_lsr; + ch->ch_cached_lsr = 0; + + /* Store how much space we have left in the queue */ + if ((qleft = tail - head - 1) < 0) + qleft += RQUEUEMASK + 1; + + /* + * If the UART is not in FIFO mode, force the FIFO copy to + * NOT be run, by setting total to 0. + * + * On the other hand, if the UART IS in FIFO mode, then ask + * the UART to give us an approximation of data it has RX'ed. + */ + if (!(ch->ch_flags & CH_FIFO_ENABLED)) + total = 0; + else { + total = readb(&ch->ch_neo_uart->rfifo); + + /* + * EXAR chip bug - RX FIFO COUNT - Fudge factor. + * + * This resolves a problem/bug with the Exar chip that sometimes + * returns a bogus value in the rfifo register. + * The count can be any where from 0-3 bytes "off". + * Bizarre, but true. + */ + total -= 3; + } + + /* + * Finally, bound the copy to make sure we don't overflow + * our own queue... + * The byte by byte copy loop below this loop this will + * deal with the queue overflow possibility. + */ + total = min(total, qleft); + + while (total > 0) { + /* + * Grab the linestatus register, we need to check + * to see if there are any errors in the FIFO. + */ + linestatus = readb(&ch->ch_neo_uart->lsr); + + /* + * Break out if there is a FIFO error somewhere. + * This will allow us to go byte by byte down below, + * finding the exact location of the error. + */ + if (linestatus & UART_17158_RX_FIFO_DATA_ERROR) + break; + + /* Make sure we don't go over the end of our queue */ + n = min(((u32) total), (RQUEUESIZE - (u32) head)); + + /* + * Cut down n even further if needed, this is to fix + * a problem with memcpy_fromio() with the Neo on the + * IBM pSeries platform. + * 15 bytes max appears to be the magic number. + */ + n = min((u32) n, (u32) 12); + + /* + * Since we are grabbing the linestatus register, which + * will reset some bits after our read, we need to ensure + * we don't miss our TX FIFO emptys. + */ + if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + + linestatus = 0; + + /* Copy data from uart to the queue */ + memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n); + /* + * Since RX_FIFO_DATA_ERROR was 0, we are guarenteed + * that all the data currently in the FIFO is free of + * breaks and parity/frame/orun errors. + */ + memset(ch->ch_equeue + head, 0, n); + + /* Add to and flip head if needed */ + head = (head + n) & RQUEUEMASK; + total -= n; + qleft -= n; + ch->ch_rxcount += n; + } + + /* + * Create a mask to determine whether we should + * insert the character (if any) into our queue. + */ + if (ch->ch_c_iflag & IGNBRK) + error_mask |= UART_LSR_BI; + + /* + * Now cleanup any leftover bytes still in the UART. + * Also deal with any possible queue overflow here as well. + */ + while (1) { + + /* + * Its possible we have a linestatus from the loop above + * this, so we "OR" on any extra bits. + */ + linestatus |= readb(&ch->ch_neo_uart->lsr); + + /* + * If the chip tells us there is no more data pending to + * be read, we can then leave. + * But before we do, cache the linestatus, just in case. + */ + if (!(linestatus & UART_LSR_DR)) { + ch->ch_cached_lsr = linestatus; + break; + } + + /* No need to store this bit */ + linestatus &= ~UART_LSR_DR; + + /* + * Since we are grabbing the linestatus register, which + * will reset some bits after our read, we need to ensure + * we don't miss our TX FIFO emptys. + */ + if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) { + linestatus &= ~(UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + } + + /* + * Discard character if we are ignoring the error mask. + */ + if (linestatus & error_mask) { + u8 discard; + linestatus = 0; + memcpy_fromio(&discard, &ch->ch_neo_uart->txrxburst, 1); + continue; + } + + /* + * If our queue is full, we have no choice but to drop some data. + * The assumption is that HWFLOW or SWFLOW should have stopped + * things way way before we got to this point. + * + * I decided that I wanted to ditch the oldest data first, + * I hope thats okay with everyone? Yes? Good. + */ + while (qleft < 1) { + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "Queue full, dropping DATA:%x LSR:%x\n", + ch->ch_rqueue[tail], ch->ch_equeue[tail]); + + ch->ch_r_tail = tail = (tail + 1) & RQUEUEMASK; + ch->ch_err_overrun++; + qleft++; + } + + memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, 1); + ch->ch_equeue[head] = (u8) linestatus; + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "DATA/LSR pair: %x %x\n", ch->ch_rqueue[head], ch->ch_equeue[head]); + + /* Ditch any remaining linestatus value. */ + linestatus = 0; + + /* Add to and flip head if needed */ + head = (head + 1) & RQUEUEMASK; + + qleft--; + ch->ch_rxcount++; + } + + /* + * Write new final heads to channel structure. + */ + ch->ch_r_head = head & RQUEUEMASK; + ch->ch_e_head = head & EQUEUEMASK; + jsm_input(ch); +} + +static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch) +{ + u16 head; + u16 tail; + int n; + int s; + int qlen; + u32 len_written = 0; + + if (!ch) + return; + + /* No data to write to the UART */ + if (ch->ch_w_tail == ch->ch_w_head) + return; + + /* If port is "stopped", don't send any data to the UART */ + if ((ch->ch_flags & CH_STOP) || (ch->ch_flags & CH_BREAK_SENDING)) + return; + /* + * If FIFOs are disabled. Send data directly to txrx register + */ + if (!(ch->ch_flags & CH_FIFO_ENABLED)) { + u8 lsrbits = readb(&ch->ch_neo_uart->lsr); + + ch->ch_cached_lsr |= lsrbits; + if (ch->ch_cached_lsr & UART_LSR_THRE) { + ch->ch_cached_lsr &= ~(UART_LSR_THRE); + + writeb(ch->ch_wqueue[ch->ch_w_tail], &ch->ch_neo_uart->txrx); + jsm_printk(WRITE, INFO, &ch->ch_bd->pci_dev, + "Tx data: %x\n", ch->ch_wqueue[ch->ch_w_head]); + ch->ch_w_tail++; + ch->ch_w_tail &= WQUEUEMASK; + ch->ch_txcount++; + } + return; + } + + /* + * We have to do it this way, because of the EXAR TXFIFO count bug. + */ + if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM))) + return; + + n = UART_17158_TX_FIFOSIZE - ch->ch_t_tlevel; + + /* cache head and tail of queue */ + head = ch->ch_w_head & WQUEUEMASK; + tail = ch->ch_w_tail & WQUEUEMASK; + qlen = (head - tail) & WQUEUEMASK; + + /* Find minimum of the FIFO space, versus queue length */ + n = min(n, qlen); + + while (n > 0) { + + s = ((head >= tail) ? head : WQUEUESIZE) - tail; + s = min(s, n); + + if (s <= 0) + break; + + memcpy_toio(&ch->ch_neo_uart->txrxburst, ch->ch_wqueue + tail, s); + /* Add and flip queue if needed */ + tail = (tail + s) & WQUEUEMASK; + n -= s; + ch->ch_txcount += s; + len_written += s; + } + + /* Update the final tail */ + ch->ch_w_tail = tail & WQUEUEMASK; + + if (len_written >= ch->ch_t_tlevel) + ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + + if (!jsm_tty_write(&ch->uart_port)) + uart_write_wakeup(&ch->uart_port); +} + +static void neo_parse_modem(struct jsm_channel *ch, u8 signals) +{ + u8 msignals = signals; + + jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev, + "neo_parse_modem: port: %d msignals: %x\n", ch->ch_portnum, msignals); + + /* Scrub off lower bits. They signify delta's, which I don't care about */ + /* Keep DDCD and DDSR though */ + msignals &= 0xf8; + + if (msignals & UART_MSR_DDCD) + uart_handle_dcd_change(&ch->uart_port, msignals & UART_MSR_DCD); + if (msignals & UART_MSR_DDSR) + uart_handle_cts_change(&ch->uart_port, msignals & UART_MSR_CTS); + if (msignals & UART_MSR_DCD) + ch->ch_mistat |= UART_MSR_DCD; + else + ch->ch_mistat &= ~UART_MSR_DCD; + + if (msignals & UART_MSR_DSR) + ch->ch_mistat |= UART_MSR_DSR; + else + ch->ch_mistat &= ~UART_MSR_DSR; + + if (msignals & UART_MSR_RI) + ch->ch_mistat |= UART_MSR_RI; + else + ch->ch_mistat &= ~UART_MSR_RI; + + if (msignals & UART_MSR_CTS) + ch->ch_mistat |= UART_MSR_CTS; + else + ch->ch_mistat &= ~UART_MSR_CTS; + + jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev, + "Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n", + ch->ch_portnum, + !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_CTS), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DSR), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_RI), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DCD)); +} + +/* Make the UART raise any of the output signals we want up */ +static void neo_assert_modem_signals(struct jsm_channel *ch) +{ + if (!ch) + return; + + writeb(ch->ch_mostat, &ch->ch_neo_uart->mcr); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); +} + +/* + * Flush the WRITE FIFO on the Neo. + * + * NOTE: Channel lock MUST be held before calling this function! + */ +static void neo_flush_uart_write(struct jsm_channel *ch) +{ + u8 tmp = 0; + int i = 0; + + if (!ch) + return; + + writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr); + + for (i = 0; i < 10; i++) { + + /* Check to see if the UART feels it completely flushed the FIFO. */ + tmp = readb(&ch->ch_neo_uart->isr_fcr); + if (tmp & 4) { + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, + "Still flushing TX UART... i: %d\n", i); + udelay(10); + } + else + break; + } + + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); +} + + +/* + * Flush the READ FIFO on the Neo. + * + * NOTE: Channel lock MUST be held before calling this function! + */ +static void neo_flush_uart_read(struct jsm_channel *ch) +{ + u8 tmp = 0; + int i = 0; + + if (!ch) + return; + + writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR), &ch->ch_neo_uart->isr_fcr); + + for (i = 0; i < 10; i++) { + + /* Check to see if the UART feels it completely flushed the FIFO. */ + tmp = readb(&ch->ch_neo_uart->isr_fcr); + if (tmp & 2) { + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, + "Still flushing RX UART... i: %d\n", i); + udelay(10); + } + else + break; + } +} + +/* + * No locks are assumed to be held when calling this function. + */ +static void neo_clear_break(struct jsm_channel *ch, int force) +{ + unsigned long lock_flags; + + spin_lock_irqsave(&ch->ch_lock, lock_flags); + + /* Turn break off, and unset some variables */ + if (ch->ch_flags & CH_BREAK_SENDING) { + u8 temp = readb(&ch->ch_neo_uart->lcr); + writeb((temp & ~UART_LCR_SBC), &ch->ch_neo_uart->lcr); + + ch->ch_flags &= ~(CH_BREAK_SENDING); + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, + "clear break Finishing UART_LCR_SBC! finished: %lx\n", jiffies); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); + } + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); +} + +/* + * Parse the ISR register. + */ +static inline void neo_parse_isr(struct jsm_board *brd, u32 port) +{ + struct jsm_channel *ch; + u8 isr; + u8 cause; + unsigned long lock_flags; + + if (!brd) + return; + + if (port > brd->maxports) + return; + + ch = brd->channels[port]; + if (!ch) + return; + + /* Here we try to figure out what caused the interrupt to happen */ + while (1) { + + isr = readb(&ch->ch_neo_uart->isr_fcr); + + /* Bail if no pending interrupt */ + if (isr & UART_IIR_NO_INT) + break; + + /* + * Yank off the upper 2 bits, which just show that the FIFO's are enabled. + */ + isr &= ~(UART_17158_IIR_FIFO_ENABLED); + + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "%s:%d isr: %x\n", __FILE__, __LINE__, isr); + + if (isr & (UART_17158_IIR_RDI_TIMEOUT | UART_IIR_RDI)) { + /* Read data from uart -> queue */ + neo_copy_data_from_uart_to_queue(ch); + + /* Call our tty layer to enforce queue flow control if needed. */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + jsm_check_queue_flow_control(ch); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + } + + if (isr & UART_IIR_THRI) { + /* Transfer data (if any) from Write Queue -> UART. */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + neo_copy_data_from_queue_to_uart(ch); + } + + if (isr & UART_17158_IIR_XONXOFF) { + cause = readb(&ch->ch_neo_uart->xoffchar1); + + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "Port %d. Got ISR_XONXOFF: cause:%x\n", port, cause); + + /* + * Since the UART detected either an XON or + * XOFF match, we need to figure out which + * one it was, so we can suspend or resume data flow. + */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + if (cause == UART_17158_XON_DETECT) { + /* Is output stopped right now, if so, resume it */ + if (brd->channels[port]->ch_flags & CH_STOP) { + ch->ch_flags &= ~(CH_STOP); + } + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "Port %d. XON detected in incoming data\n", port); + } + else if (cause == UART_17158_XOFF_DETECT) { + if (!(brd->channels[port]->ch_flags & CH_STOP)) { + ch->ch_flags |= CH_STOP; + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "Setting CH_STOP\n"); + } + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "Port: %d. XOFF detected in incoming data\n", port); + } + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + } + + if (isr & UART_17158_IIR_HWFLOW_STATE_CHANGE) { + /* + * If we get here, this means the hardware is doing auto flow control. + * Check to see whether RTS/DTR or CTS/DSR caused this interrupt. + */ + cause = readb(&ch->ch_neo_uart->mcr); + + /* Which pin is doing auto flow? RTS or DTR? */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + if ((cause & 0x4) == 0) { + if (cause & UART_MCR_RTS) + ch->ch_mostat |= UART_MCR_RTS; + else + ch->ch_mostat &= ~(UART_MCR_RTS); + } else { + if (cause & UART_MCR_DTR) + ch->ch_mostat |= UART_MCR_DTR; + else + ch->ch_mostat &= ~(UART_MCR_DTR); + } + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + } + + /* Parse any modem signal changes */ + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "MOD_STAT: sending to parse_modem_sigs\n"); + neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr)); + } +} + +static inline void neo_parse_lsr(struct jsm_board *brd, u32 port) +{ + struct jsm_channel *ch; + int linestatus; + unsigned long lock_flags; + + if (!brd) + return; + + if (port > brd->maxports) + return; + + ch = brd->channels[port]; + if (!ch) + return; + + linestatus = readb(&ch->ch_neo_uart->lsr); + + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "%s:%d port: %d linestatus: %x\n", __FILE__, __LINE__, port, linestatus); + + ch->ch_cached_lsr |= linestatus; + + if (ch->ch_cached_lsr & UART_LSR_DR) { + /* Read data from uart -> queue */ + neo_copy_data_from_uart_to_queue(ch); + spin_lock_irqsave(&ch->ch_lock, lock_flags); + jsm_check_queue_flow_control(ch); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + } + + /* + * This is a special flag. It indicates that at least 1 + * RX error (parity, framing, or break) has happened. + * Mark this in our struct, which will tell me that I have + *to do the special RX+LSR read for this FIFO load. + */ + if (linestatus & UART_17158_RX_FIFO_DATA_ERROR) + jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, + "%s:%d Port: %d Got an RX error, need to parse LSR\n", + __FILE__, __LINE__, port); + + /* + * The next 3 tests should *NOT* happen, as the above test + * should encapsulate all 3... At least, thats what Exar says. + */ + + if (linestatus & UART_LSR_PE) { + ch->ch_err_parity++; + jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, + "%s:%d Port: %d. PAR ERR!\n", __FILE__, __LINE__, port); + } + + if (linestatus & UART_LSR_FE) { + ch->ch_err_frame++; + jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, + "%s:%d Port: %d. FRM ERR!\n", __FILE__, __LINE__, port); + } + + if (linestatus & UART_LSR_BI) { + ch->ch_err_break++; + jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, + "%s:%d Port: %d. BRK INTR!\n", __FILE__, __LINE__, port); + } + + if (linestatus & UART_LSR_OE) { + /* + * Rx Oruns. Exar says that an orun will NOT corrupt + * the FIFO. It will just replace the holding register + * with this new data byte. So basically just ignore this. + * Probably we should eventually have an orun stat in our driver... + */ + ch->ch_err_overrun++; + jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, + "%s:%d Port: %d. Rx Overrun!\n", __FILE__, __LINE__, port); + } + + if (linestatus & UART_LSR_THRE) { + spin_lock_irqsave(&ch->ch_lock, lock_flags); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + + /* Transfer data (if any) from Write Queue -> UART. */ + neo_copy_data_from_queue_to_uart(ch); + } + else if (linestatus & UART_17158_TX_AND_FIFO_CLR) { + spin_lock_irqsave(&ch->ch_lock, lock_flags); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + + /* Transfer data (if any) from Write Queue -> UART. */ + neo_copy_data_from_queue_to_uart(ch); + } +} + +/* + * neo_param() + * Send any/all changes to the line to the UART. + */ +static void neo_param(struct jsm_channel *ch) +{ + u8 lcr = 0; + u8 uart_lcr, ier; + u32 baud; + int quot; + struct jsm_board *bd; + + bd = ch->ch_bd; + if (!bd) + return; + + /* + * If baud rate is zero, flush queues, and set mval to drop DTR. + */ + if ((ch->ch_c_cflag & (CBAUD)) == 0) { + ch->ch_r_head = ch->ch_r_tail = 0; + ch->ch_e_head = ch->ch_e_tail = 0; + ch->ch_w_head = ch->ch_w_tail = 0; + + neo_flush_uart_write(ch); + neo_flush_uart_read(ch); + + ch->ch_flags |= (CH_BAUD0); + ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR); + neo_assert_modem_signals(ch); + return; + + } else { + int i; + unsigned int cflag; + static struct { + unsigned int rate; + unsigned int cflag; + } baud_rates[] = { + { 921600, B921600 }, + { 460800, B460800 }, + { 230400, B230400 }, + { 115200, B115200 }, + { 57600, B57600 }, + { 38400, B38400 }, + { 19200, B19200 }, + { 9600, B9600 }, + { 4800, B4800 }, + { 2400, B2400 }, + { 1200, B1200 }, + { 600, B600 }, + { 300, B300 }, + { 200, B200 }, + { 150, B150 }, + { 134, B134 }, + { 110, B110 }, + { 75, B75 }, + { 50, B50 }, + }; + + cflag = C_BAUD(ch->uart_port.state->port.tty); + baud = 9600; + for (i = 0; i < ARRAY_SIZE(baud_rates); i++) { + if (baud_rates[i].cflag == cflag) { + baud = baud_rates[i].rate; + break; + } + } + + if (ch->ch_flags & CH_BAUD0) + ch->ch_flags &= ~(CH_BAUD0); + } + + if (ch->ch_c_cflag & PARENB) + lcr |= UART_LCR_PARITY; + + if (!(ch->ch_c_cflag & PARODD)) + lcr |= UART_LCR_EPAR; + + /* + * Not all platforms support mark/space parity, + * so this will hide behind an ifdef. + */ +#ifdef CMSPAR + if (ch->ch_c_cflag & CMSPAR) + lcr |= UART_LCR_SPAR; +#endif + + if (ch->ch_c_cflag & CSTOPB) + lcr |= UART_LCR_STOP; + + switch (ch->ch_c_cflag & CSIZE) { + case CS5: + lcr |= UART_LCR_WLEN5; + break; + case CS6: + lcr |= UART_LCR_WLEN6; + break; + case CS7: + lcr |= UART_LCR_WLEN7; + break; + case CS8: + default: + lcr |= UART_LCR_WLEN8; + break; + } + + ier = readb(&ch->ch_neo_uart->ier); + uart_lcr = readb(&ch->ch_neo_uart->lcr); + + if (baud == 0) + baud = 9600; + + quot = ch->ch_bd->bd_dividend / baud; + + if (quot != 0) { + writeb(UART_LCR_DLAB, &ch->ch_neo_uart->lcr); + writeb((quot & 0xff), &ch->ch_neo_uart->txrx); + writeb((quot >> 8), &ch->ch_neo_uart->ier); + writeb(lcr, &ch->ch_neo_uart->lcr); + } + + if (uart_lcr != lcr) + writeb(lcr, &ch->ch_neo_uart->lcr); + + if (ch->ch_c_cflag & CREAD) + ier |= (UART_IER_RDI | UART_IER_RLSI); + + ier |= (UART_IER_THRI | UART_IER_MSI); + + writeb(ier, &ch->ch_neo_uart->ier); + + /* Set new start/stop chars */ + neo_set_new_start_stop_chars(ch); + + if (ch->ch_c_cflag & CRTSCTS) + neo_set_cts_flow_control(ch); + else if (ch->ch_c_iflag & IXON) { + /* If start/stop is set to disable, then we should disable flow control */ + if ((ch->ch_startc == __DISABLED_CHAR) || (ch->ch_stopc == __DISABLED_CHAR)) + neo_set_no_output_flow_control(ch); + else + neo_set_ixon_flow_control(ch); + } + else + neo_set_no_output_flow_control(ch); + + if (ch->ch_c_cflag & CRTSCTS) + neo_set_rts_flow_control(ch); + else if (ch->ch_c_iflag & IXOFF) { + /* If start/stop is set to disable, then we should disable flow control */ + if ((ch->ch_startc == __DISABLED_CHAR) || (ch->ch_stopc == __DISABLED_CHAR)) + neo_set_no_input_flow_control(ch); + else + neo_set_ixoff_flow_control(ch); + } + else + neo_set_no_input_flow_control(ch); + /* + * Adjust the RX FIFO Trigger level if baud is less than 9600. + * Not exactly elegant, but this is needed because of the Exar chip's + * delay on firing off the RX FIFO interrupt on slower baud rates. + */ + if (baud < 9600) { + writeb(1, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 1; + } + + neo_assert_modem_signals(ch); + + /* Get current status of the modem signals now */ + neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr)); + return; +} + +/* + * jsm_neo_intr() + * + * Neo specific interrupt handler. + */ +static irqreturn_t neo_intr(int irq, void *voidbrd) +{ + struct jsm_board *brd = voidbrd; + struct jsm_channel *ch; + int port = 0; + int type = 0; + int current_port; + u32 tmp; + u32 uart_poll; + unsigned long lock_flags; + unsigned long lock_flags2; + int outofloop_count = 0; + + /* Lock out the slow poller from running on this board. */ + spin_lock_irqsave(&brd->bd_intr_lock, lock_flags); + + /* + * Read in "extended" IRQ information from the 32bit Neo register. + * Bits 0-7: What port triggered the interrupt. + * Bits 8-31: Each 3bits indicate what type of interrupt occurred. + */ + uart_poll = readl(brd->re_map_membase + UART_17158_POLL_ADDR_OFFSET); + + jsm_printk(INTR, INFO, &brd->pci_dev, + "%s:%d uart_poll: %x\n", __FILE__, __LINE__, uart_poll); + + if (!uart_poll) { + jsm_printk(INTR, INFO, &brd->pci_dev, + "Kernel interrupted to me, but no pending interrupts...\n"); + spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); + return IRQ_NONE; + } + + /* At this point, we have at least SOMETHING to service, dig further... */ + + current_port = 0; + + /* Loop on each port */ + while (((uart_poll & 0xff) != 0) && (outofloop_count < 0xff)){ + + tmp = uart_poll; + outofloop_count++; + + /* Check current port to see if it has interrupt pending */ + if ((tmp & jsm_offset_table[current_port]) != 0) { + port = current_port; + type = tmp >> (8 + (port * 3)); + type &= 0x7; + } else { + current_port++; + continue; + } + + jsm_printk(INTR, INFO, &brd->pci_dev, + "%s:%d port: %x type: %x\n", __FILE__, __LINE__, port, type); + + /* Remove this port + type from uart_poll */ + uart_poll &= ~(jsm_offset_table[port]); + + if (!type) { + /* If no type, just ignore it, and move onto next port */ + jsm_printk(INTR, ERR, &brd->pci_dev, + "Interrupt with no type! port: %d\n", port); + continue; + } + + /* Switch on type of interrupt we have */ + switch (type) { + + case UART_17158_RXRDY_TIMEOUT: + /* + * RXRDY Time-out is cleared by reading data in the + * RX FIFO until it falls below the trigger level. + */ + + /* Verify the port is in range. */ + if (port > brd->nasync) + continue; + + ch = brd->channels[port]; + neo_copy_data_from_uart_to_queue(ch); + + /* Call our tty layer to enforce queue flow control if needed. */ + spin_lock_irqsave(&ch->ch_lock, lock_flags2); + jsm_check_queue_flow_control(ch); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); + + continue; + + case UART_17158_RX_LINE_STATUS: + /* + * RXRDY and RX LINE Status (logic OR of LSR[4:1]) + */ + neo_parse_lsr(brd, port); + continue; + + case UART_17158_TXRDY: + /* + * TXRDY interrupt clears after reading ISR register for the UART channel. + */ + + /* + * Yes, this is odd... + * Why would I check EVERY possibility of type of + * interrupt, when we know its TXRDY??? + * Becuz for some reason, even tho we got triggered for TXRDY, + * it seems to be occassionally wrong. Instead of TX, which + * it should be, I was getting things like RXDY too. Weird. + */ + neo_parse_isr(brd, port); + continue; + + case UART_17158_MSR: + /* + * MSR or flow control was seen. + */ + neo_parse_isr(brd, port); + continue; + + default: + /* + * The UART triggered us with a bogus interrupt type. + * It appears the Exar chip, when REALLY bogged down, will throw + * these once and awhile. + * Its harmless, just ignore it and move on. + */ + jsm_printk(INTR, ERR, &brd->pci_dev, + "%s:%d Unknown Interrupt type: %x\n", __FILE__, __LINE__, type); + continue; + } + } + + spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); + + jsm_printk(INTR, INFO, &brd->pci_dev, "finish.\n"); + return IRQ_HANDLED; +} + +/* + * Neo specific way of turning off the receiver. + * Used as a way to enforce queue flow control when in + * hardware flow control mode. + */ +static void neo_disable_receiver(struct jsm_channel *ch) +{ + u8 tmp = readb(&ch->ch_neo_uart->ier); + tmp &= ~(UART_IER_RDI); + writeb(tmp, &ch->ch_neo_uart->ier); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); +} + + +/* + * Neo specific way of turning on the receiver. + * Used as a way to un-enforce queue flow control when in + * hardware flow control mode. + */ +static void neo_enable_receiver(struct jsm_channel *ch) +{ + u8 tmp = readb(&ch->ch_neo_uart->ier); + tmp |= (UART_IER_RDI); + writeb(tmp, &ch->ch_neo_uart->ier); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); +} + +static void neo_send_start_character(struct jsm_channel *ch) +{ + if (!ch) + return; + + if (ch->ch_startc != __DISABLED_CHAR) { + ch->ch_xon_sends++; + writeb(ch->ch_startc, &ch->ch_neo_uart->txrx); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); + } +} + +static void neo_send_stop_character(struct jsm_channel *ch) +{ + if (!ch) + return; + + if (ch->ch_stopc != __DISABLED_CHAR) { + ch->ch_xoff_sends++; + writeb(ch->ch_stopc, &ch->ch_neo_uart->txrx); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); + } +} + +/* + * neo_uart_init + */ +static void neo_uart_init(struct jsm_channel *ch) +{ + writeb(0, &ch->ch_neo_uart->ier); + writeb(0, &ch->ch_neo_uart->efr); + writeb(UART_EFR_ECB, &ch->ch_neo_uart->efr); + + /* Clear out UART and FIFO */ + readb(&ch->ch_neo_uart->txrx); + writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr); + readb(&ch->ch_neo_uart->lsr); + readb(&ch->ch_neo_uart->msr); + + ch->ch_flags |= CH_FIFO_ENABLED; + + /* Assert any signals we want up */ + writeb(ch->ch_mostat, &ch->ch_neo_uart->mcr); +} + +/* + * Make the UART completely turn off. + */ +static void neo_uart_off(struct jsm_channel *ch) +{ + /* Turn off UART enhanced bits */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Stop all interrupts from occurring. */ + writeb(0, &ch->ch_neo_uart->ier); +} + +static u32 neo_get_uart_bytes_left(struct jsm_channel *ch) +{ + u8 left = 0; + u8 lsr = readb(&ch->ch_neo_uart->lsr); + + /* We must cache the LSR as some of the bits get reset once read... */ + ch->ch_cached_lsr |= lsr; + + /* Determine whether the Transmitter is empty or not */ + if (!(lsr & UART_LSR_TEMT)) + left = 1; + else { + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + left = 0; + } + + return left; +} + +/* Channel lock MUST be held by the calling function! */ +static void neo_send_break(struct jsm_channel *ch) +{ + /* + * Set the time we should stop sending the break. + * If we are already sending a break, toss away the existing + * time to stop, and use this new value instead. + */ + + /* Tell the UART to start sending the break */ + if (!(ch->ch_flags & CH_BREAK_SENDING)) { + u8 temp = readb(&ch->ch_neo_uart->lcr); + writeb((temp | UART_LCR_SBC), &ch->ch_neo_uart->lcr); + ch->ch_flags |= (CH_BREAK_SENDING); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); + } +} + +/* + * neo_send_immediate_char. + * + * Sends a specific character as soon as possible to the UART, + * jumping over any bytes that might be in the write queue. + * + * The channel lock MUST be held by the calling function. + */ +static void neo_send_immediate_char(struct jsm_channel *ch, unsigned char c) +{ + if (!ch) + return; + + writeb(c, &ch->ch_neo_uart->txrx); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); +} + +struct board_ops jsm_neo_ops = { + .intr = neo_intr, + .uart_init = neo_uart_init, + .uart_off = neo_uart_off, + .param = neo_param, + .assert_modem_signals = neo_assert_modem_signals, + .flush_uart_write = neo_flush_uart_write, + .flush_uart_read = neo_flush_uart_read, + .disable_receiver = neo_disable_receiver, + .enable_receiver = neo_enable_receiver, + .send_break = neo_send_break, + .clear_break = neo_clear_break, + .send_start_character = neo_send_start_character, + .send_stop_character = neo_send_stop_character, + .copy_data_from_queue_to_uart = neo_copy_data_from_queue_to_uart, + .get_uart_bytes_left = neo_get_uart_bytes_left, + .send_immediate_char = neo_send_immediate_char +}; diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c new file mode 100644 index 000000000000..7a4a914ecff0 --- /dev/null +++ b/drivers/tty/serial/jsm/jsm_tty.c @@ -0,0 +1,910 @@ +/************************************************************************ + * Copyright 2003 Digi International (www.digi.com) + * + * Copyright (C) 2004 IBM Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the + * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * Contact Information: + * Scott H Kilau + * Ananda Venkatarman + * Modifications: + * 01/19/06: changed jsm_input routine to use the dynamically allocated + * tty_buffer changes. Contributors: Scott Kilau and Ananda V. + ***********************************************************************/ +#include +#include +#include +#include /* For udelay */ +#include +#include + +#include "jsm.h" + +static DECLARE_BITMAP(linemap, MAXLINES); + +static void jsm_carrier(struct jsm_channel *ch); + +static inline int jsm_get_mstat(struct jsm_channel *ch) +{ + unsigned char mstat; + unsigned result; + + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "start\n"); + + mstat = (ch->ch_mostat | ch->ch_mistat); + + result = 0; + + if (mstat & UART_MCR_DTR) + result |= TIOCM_DTR; + if (mstat & UART_MCR_RTS) + result |= TIOCM_RTS; + if (mstat & UART_MSR_CTS) + result |= TIOCM_CTS; + if (mstat & UART_MSR_DSR) + result |= TIOCM_DSR; + if (mstat & UART_MSR_RI) + result |= TIOCM_RI; + if (mstat & UART_MSR_DCD) + result |= TIOCM_CD; + + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n"); + return result; +} + +static unsigned int jsm_tty_tx_empty(struct uart_port *port) +{ + return TIOCSER_TEMT; +} + +/* + * Return modem signals to ld. + */ +static unsigned int jsm_tty_get_mctrl(struct uart_port *port) +{ + int result; + struct jsm_channel *channel = (struct jsm_channel *)port; + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); + + result = jsm_get_mstat(channel); + + if (result < 0) + return -ENXIO; + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); + + return result; +} + +/* + * jsm_set_modem_info() + * + * Set modem signals, called by ld. + */ +static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct jsm_channel *channel = (struct jsm_channel *)port; + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); + + if (mctrl & TIOCM_RTS) + channel->ch_mostat |= UART_MCR_RTS; + else + channel->ch_mostat &= ~UART_MCR_RTS; + + if (mctrl & TIOCM_DTR) + channel->ch_mostat |= UART_MCR_DTR; + else + channel->ch_mostat &= ~UART_MCR_DTR; + + channel->ch_bd->bd_ops->assert_modem_signals(channel); + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); + udelay(10); +} + +static void jsm_tty_start_tx(struct uart_port *port) +{ + struct jsm_channel *channel = (struct jsm_channel *)port; + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); + + channel->ch_flags &= ~(CH_STOP); + jsm_tty_write(port); + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); +} + +static void jsm_tty_stop_tx(struct uart_port *port) +{ + struct jsm_channel *channel = (struct jsm_channel *)port; + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); + + channel->ch_flags |= (CH_STOP); + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); +} + +static void jsm_tty_send_xchar(struct uart_port *port, char ch) +{ + unsigned long lock_flags; + struct jsm_channel *channel = (struct jsm_channel *)port; + struct ktermios *termios; + + spin_lock_irqsave(&port->lock, lock_flags); + termios = port->state->port.tty->termios; + if (ch == termios->c_cc[VSTART]) + channel->ch_bd->bd_ops->send_start_character(channel); + + if (ch == termios->c_cc[VSTOP]) + channel->ch_bd->bd_ops->send_stop_character(channel); + spin_unlock_irqrestore(&port->lock, lock_flags); +} + +static void jsm_tty_stop_rx(struct uart_port *port) +{ + struct jsm_channel *channel = (struct jsm_channel *)port; + + channel->ch_bd->bd_ops->disable_receiver(channel); +} + +static void jsm_tty_enable_ms(struct uart_port *port) +{ + /* Nothing needed */ +} + +static void jsm_tty_break(struct uart_port *port, int break_state) +{ + unsigned long lock_flags; + struct jsm_channel *channel = (struct jsm_channel *)port; + + spin_lock_irqsave(&port->lock, lock_flags); + if (break_state == -1) + channel->ch_bd->bd_ops->send_break(channel); + else + channel->ch_bd->bd_ops->clear_break(channel, 0); + + spin_unlock_irqrestore(&port->lock, lock_flags); +} + +static int jsm_tty_open(struct uart_port *port) +{ + struct jsm_board *brd; + struct jsm_channel *channel = (struct jsm_channel *)port; + struct ktermios *termios; + + /* Get board pointer from our array of majors we have allocated */ + brd = channel->ch_bd; + + /* + * Allocate channel buffers for read/write/error. + * Set flag, so we don't get trounced on. + */ + channel->ch_flags |= (CH_OPENING); + + /* Drop locks, as malloc with GFP_KERNEL can sleep */ + + if (!channel->ch_rqueue) { + channel->ch_rqueue = kzalloc(RQUEUESIZE, GFP_KERNEL); + if (!channel->ch_rqueue) { + jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, + "unable to allocate read queue buf"); + return -ENOMEM; + } + } + if (!channel->ch_equeue) { + channel->ch_equeue = kzalloc(EQUEUESIZE, GFP_KERNEL); + if (!channel->ch_equeue) { + jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, + "unable to allocate error queue buf"); + return -ENOMEM; + } + } + if (!channel->ch_wqueue) { + channel->ch_wqueue = kzalloc(WQUEUESIZE, GFP_KERNEL); + if (!channel->ch_wqueue) { + jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, + "unable to allocate write queue buf"); + return -ENOMEM; + } + } + + channel->ch_flags &= ~(CH_OPENING); + /* + * Initialize if neither terminal is open. + */ + jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, + "jsm_open: initializing channel in open...\n"); + + /* + * Flush input queues. + */ + channel->ch_r_head = channel->ch_r_tail = 0; + channel->ch_e_head = channel->ch_e_tail = 0; + channel->ch_w_head = channel->ch_w_tail = 0; + + brd->bd_ops->flush_uart_write(channel); + brd->bd_ops->flush_uart_read(channel); + + channel->ch_flags = 0; + channel->ch_cached_lsr = 0; + channel->ch_stops_sent = 0; + + termios = port->state->port.tty->termios; + channel->ch_c_cflag = termios->c_cflag; + channel->ch_c_iflag = termios->c_iflag; + channel->ch_c_oflag = termios->c_oflag; + channel->ch_c_lflag = termios->c_lflag; + channel->ch_startc = termios->c_cc[VSTART]; + channel->ch_stopc = termios->c_cc[VSTOP]; + + /* Tell UART to init itself */ + brd->bd_ops->uart_init(channel); + + /* + * Run param in case we changed anything + */ + brd->bd_ops->param(channel); + + jsm_carrier(channel); + + channel->ch_open_count++; + + jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, "finish\n"); + return 0; +} + +static void jsm_tty_close(struct uart_port *port) +{ + struct jsm_board *bd; + struct ktermios *ts; + struct jsm_channel *channel = (struct jsm_channel *)port; + + jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n"); + + bd = channel->ch_bd; + ts = port->state->port.tty->termios; + + channel->ch_flags &= ~(CH_STOPI); + + channel->ch_open_count--; + + /* + * If we have HUPCL set, lower DTR and RTS + */ + if (channel->ch_c_cflag & HUPCL) { + jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, + "Close. HUPCL set, dropping DTR/RTS\n"); + + /* Drop RTS/DTR */ + channel->ch_mostat &= ~(UART_MCR_DTR | UART_MCR_RTS); + bd->bd_ops->assert_modem_signals(channel); + } + + /* Turn off UART interrupts for this port */ + channel->ch_bd->bd_ops->uart_off(channel); + + jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "finish\n"); +} + +static void jsm_tty_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old_termios) +{ + unsigned long lock_flags; + struct jsm_channel *channel = (struct jsm_channel *)port; + + spin_lock_irqsave(&port->lock, lock_flags); + channel->ch_c_cflag = termios->c_cflag; + channel->ch_c_iflag = termios->c_iflag; + channel->ch_c_oflag = termios->c_oflag; + channel->ch_c_lflag = termios->c_lflag; + channel->ch_startc = termios->c_cc[VSTART]; + channel->ch_stopc = termios->c_cc[VSTOP]; + + channel->ch_bd->bd_ops->param(channel); + jsm_carrier(channel); + spin_unlock_irqrestore(&port->lock, lock_flags); +} + +static const char *jsm_tty_type(struct uart_port *port) +{ + return "jsm"; +} + +static void jsm_tty_release_port(struct uart_port *port) +{ +} + +static int jsm_tty_request_port(struct uart_port *port) +{ + return 0; +} + +static void jsm_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_JSM; +} + +static struct uart_ops jsm_ops = { + .tx_empty = jsm_tty_tx_empty, + .set_mctrl = jsm_tty_set_mctrl, + .get_mctrl = jsm_tty_get_mctrl, + .stop_tx = jsm_tty_stop_tx, + .start_tx = jsm_tty_start_tx, + .send_xchar = jsm_tty_send_xchar, + .stop_rx = jsm_tty_stop_rx, + .enable_ms = jsm_tty_enable_ms, + .break_ctl = jsm_tty_break, + .startup = jsm_tty_open, + .shutdown = jsm_tty_close, + .set_termios = jsm_tty_set_termios, + .type = jsm_tty_type, + .release_port = jsm_tty_release_port, + .request_port = jsm_tty_request_port, + .config_port = jsm_config_port, +}; + +/* + * jsm_tty_init() + * + * Init the tty subsystem. Called once per board after board has been + * downloaded and init'ed. + */ +int __devinit jsm_tty_init(struct jsm_board *brd) +{ + int i; + void __iomem *vaddr; + struct jsm_channel *ch; + + if (!brd) + return -ENXIO; + + jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); + + /* + * Initialize board structure elements. + */ + + brd->nasync = brd->maxports; + + /* + * Allocate channel memory that might not have been allocated + * when the driver was first loaded. + */ + for (i = 0; i < brd->nasync; i++) { + if (!brd->channels[i]) { + + /* + * Okay to malloc with GFP_KERNEL, we are not at + * interrupt context, and there are no locks held. + */ + brd->channels[i] = kzalloc(sizeof(struct jsm_channel), GFP_KERNEL); + if (!brd->channels[i]) { + jsm_printk(CORE, ERR, &brd->pci_dev, + "%s:%d Unable to allocate memory for channel struct\n", + __FILE__, __LINE__); + } + } + } + + ch = brd->channels[0]; + vaddr = brd->re_map_membase; + + /* Set up channel variables */ + for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) { + + if (!brd->channels[i]) + continue; + + spin_lock_init(&ch->ch_lock); + + if (brd->bd_uart_offset == 0x200) + ch->ch_neo_uart = vaddr + (brd->bd_uart_offset * i); + + ch->ch_bd = brd; + ch->ch_portnum = i; + + /* .25 second delay */ + ch->ch_close_delay = 250; + + init_waitqueue_head(&ch->ch_flags_wait); + } + + jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); + return 0; +} + +int jsm_uart_port_init(struct jsm_board *brd) +{ + int i, rc; + unsigned int line; + struct jsm_channel *ch; + + if (!brd) + return -ENXIO; + + jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); + + /* + * Initialize board structure elements. + */ + + brd->nasync = brd->maxports; + + /* Set up channel variables */ + for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) { + + if (!brd->channels[i]) + continue; + + brd->channels[i]->uart_port.irq = brd->irq; + brd->channels[i]->uart_port.uartclk = 14745600; + brd->channels[i]->uart_port.type = PORT_JSM; + brd->channels[i]->uart_port.iotype = UPIO_MEM; + brd->channels[i]->uart_port.membase = brd->re_map_membase; + brd->channels[i]->uart_port.fifosize = 16; + brd->channels[i]->uart_port.ops = &jsm_ops; + line = find_first_zero_bit(linemap, MAXLINES); + if (line >= MAXLINES) { + printk(KERN_INFO "jsm: linemap is full, added device failed\n"); + continue; + } else + set_bit(line, linemap); + brd->channels[i]->uart_port.line = line; + rc = uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port); + if (rc){ + printk(KERN_INFO "jsm: Port %d failed. Aborting...\n", i); + return rc; + } + else + printk(KERN_INFO "jsm: Port %d added\n", i); + } + + jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); + return 0; +} + +int jsm_remove_uart_port(struct jsm_board *brd) +{ + int i; + struct jsm_channel *ch; + + if (!brd) + return -ENXIO; + + jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); + + /* + * Initialize board structure elements. + */ + + brd->nasync = brd->maxports; + + /* Set up channel variables */ + for (i = 0; i < brd->nasync; i++) { + + if (!brd->channels[i]) + continue; + + ch = brd->channels[i]; + + clear_bit(ch->uart_port.line, linemap); + uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port); + } + + jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); + return 0; +} + +void jsm_input(struct jsm_channel *ch) +{ + struct jsm_board *bd; + struct tty_struct *tp; + u32 rmask; + u16 head; + u16 tail; + int data_len; + unsigned long lock_flags; + int len = 0; + int n = 0; + int s = 0; + int i = 0; + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n"); + + if (!ch) + return; + + tp = ch->uart_port.state->port.tty; + + bd = ch->ch_bd; + if(!bd) + return; + + spin_lock_irqsave(&ch->ch_lock, lock_flags); + + /* + *Figure the number of characters in the buffer. + *Exit immediately if none. + */ + + rmask = RQUEUEMASK; + + head = ch->ch_r_head & rmask; + tail = ch->ch_r_tail & rmask; + + data_len = (head - tail) & rmask; + if (data_len == 0) { + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + return; + } + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n"); + + /* + *If the device is not open, or CREAD is off, flush + *input data and return immediately. + */ + if (!tp || + !(tp->termios->c_cflag & CREAD) ) { + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum); + ch->ch_r_head = tail; + + /* Force queue flow control to be released, if needed */ + jsm_check_queue_flow_control(ch); + + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + return; + } + + /* + * If we are throttled, simply don't read any data. + */ + if (ch->ch_flags & CH_STOPI) { + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "Port %d throttled, not reading any data. head: %x tail: %x\n", + ch->ch_portnum, head, tail); + return; + } + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start 2\n"); + + if (data_len <= 0) { + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n"); + return; + } + + len = tty_buffer_request_room(tp, data_len); + n = len; + + /* + * n now contains the most amount of data we can copy, + * bounded either by the flip buffer size or the amount + * of data the card actually has pending... + */ + while (n) { + s = ((head >= tail) ? head : RQUEUESIZE) - tail; + s = min(s, n); + + if (s <= 0) + break; + + /* + * If conditions are such that ld needs to see all + * UART errors, we will have to walk each character + * and error byte and send them to the buffer one at + * a time. + */ + + if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) { + for (i = 0; i < s; i++) { + /* + * Give the Linux ld the flags in the + * format it likes. + */ + if (*(ch->ch_equeue +tail +i) & UART_LSR_BI) + tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_BREAK); + else if (*(ch->ch_equeue +tail +i) & UART_LSR_PE) + tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_PARITY); + else if (*(ch->ch_equeue +tail +i) & UART_LSR_FE) + tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_FRAME); + else + tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_NORMAL); + } + } else { + tty_insert_flip_string(tp, ch->ch_rqueue + tail, s) ; + } + tail += s; + n -= s; + /* Flip queue if needed */ + tail &= rmask; + } + + ch->ch_r_tail = tail & rmask; + ch->ch_e_tail = tail & rmask; + jsm_check_queue_flow_control(ch); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + + /* Tell the tty layer its okay to "eat" the data now */ + tty_flip_buffer_push(tp); + + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n"); +} + +static void jsm_carrier(struct jsm_channel *ch) +{ + struct jsm_board *bd; + + int virt_carrier = 0; + int phys_carrier = 0; + + jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, "start\n"); + if (!ch) + return; + + bd = ch->ch_bd; + + if (!bd) + return; + + if (ch->ch_mistat & UART_MSR_DCD) { + jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, + "mistat: %x D_CD: %x\n", ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD); + phys_carrier = 1; + } + + if (ch->ch_c_cflag & CLOCAL) + virt_carrier = 1; + + jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, + "DCD: physical: %d virt: %d\n", phys_carrier, virt_carrier); + + /* + * Test for a VIRTUAL carrier transition to HIGH. + */ + if (((ch->ch_flags & CH_FCAR) == 0) && (virt_carrier == 1)) { + + /* + * When carrier rises, wake any threads waiting + * for carrier in the open routine. + */ + + jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, + "carrier: virt DCD rose\n"); + + if (waitqueue_active(&(ch->ch_flags_wait))) + wake_up_interruptible(&ch->ch_flags_wait); + } + + /* + * Test for a PHYSICAL carrier transition to HIGH. + */ + if (((ch->ch_flags & CH_CD) == 0) && (phys_carrier == 1)) { + + /* + * When carrier rises, wake any threads waiting + * for carrier in the open routine. + */ + + jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, + "carrier: physical DCD rose\n"); + + if (waitqueue_active(&(ch->ch_flags_wait))) + wake_up_interruptible(&ch->ch_flags_wait); + } + + /* + * Test for a PHYSICAL transition to low, so long as we aren't + * currently ignoring physical transitions (which is what "virtual + * carrier" indicates). + * + * The transition of the virtual carrier to low really doesn't + * matter... it really only means "ignore carrier state", not + * "make pretend that carrier is there". + */ + if ((virt_carrier == 0) && ((ch->ch_flags & CH_CD) != 0) + && (phys_carrier == 0)) { + /* + * When carrier drops: + * + * Drop carrier on all open units. + * + * Flush queues, waking up any task waiting in the + * line discipline. + * + * Send a hangup to the control terminal. + * + * Enable all select calls. + */ + if (waitqueue_active(&(ch->ch_flags_wait))) + wake_up_interruptible(&ch->ch_flags_wait); + } + + /* + * Make sure that our cached values reflect the current reality. + */ + if (virt_carrier == 1) + ch->ch_flags |= CH_FCAR; + else + ch->ch_flags &= ~CH_FCAR; + + if (phys_carrier == 1) + ch->ch_flags |= CH_CD; + else + ch->ch_flags &= ~CH_CD; +} + + +void jsm_check_queue_flow_control(struct jsm_channel *ch) +{ + struct board_ops *bd_ops = ch->ch_bd->bd_ops; + int qleft; + + /* Store how much space we have left in the queue */ + if ((qleft = ch->ch_r_tail - ch->ch_r_head - 1) < 0) + qleft += RQUEUEMASK + 1; + + /* + * Check to see if we should enforce flow control on our queue because + * the ld (or user) isn't reading data out of our queue fast enuf. + * + * NOTE: This is done based on what the current flow control of the + * port is set for. + * + * 1) HWFLOW (RTS) - Turn off the UART's Receive interrupt. + * This will cause the UART's FIFO to back up, and force + * the RTS signal to be dropped. + * 2) SWFLOW (IXOFF) - Keep trying to send a stop character to + * the other side, in hopes it will stop sending data to us. + * 3) NONE - Nothing we can do. We will simply drop any extra data + * that gets sent into us when the queue fills up. + */ + if (qleft < 256) { + /* HWFLOW */ + if (ch->ch_c_cflag & CRTSCTS) { + if(!(ch->ch_flags & CH_RECEIVER_OFF)) { + bd_ops->disable_receiver(ch); + ch->ch_flags |= (CH_RECEIVER_OFF); + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "Internal queue hit hilevel mark (%d)! Turning off interrupts.\n", + qleft); + } + } + /* SWFLOW */ + else if (ch->ch_c_iflag & IXOFF) { + if (ch->ch_stops_sent <= MAX_STOPS_SENT) { + bd_ops->send_stop_character(ch); + ch->ch_stops_sent++; + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "Sending stop char! Times sent: %x\n", ch->ch_stops_sent); + } + } + } + + /* + * Check to see if we should unenforce flow control because + * ld (or user) finally read enuf data out of our queue. + * + * NOTE: This is done based on what the current flow control of the + * port is set for. + * + * 1) HWFLOW (RTS) - Turn back on the UART's Receive interrupt. + * This will cause the UART's FIFO to raise RTS back up, + * which will allow the other side to start sending data again. + * 2) SWFLOW (IXOFF) - Send a start character to + * the other side, so it will start sending data to us again. + * 3) NONE - Do nothing. Since we didn't do anything to turn off the + * other side, we don't need to do anything now. + */ + if (qleft > (RQUEUESIZE / 2)) { + /* HWFLOW */ + if (ch->ch_c_cflag & CRTSCTS) { + if (ch->ch_flags & CH_RECEIVER_OFF) { + bd_ops->enable_receiver(ch); + ch->ch_flags &= ~(CH_RECEIVER_OFF); + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "Internal queue hit lowlevel mark (%d)! Turning on interrupts.\n", + qleft); + } + } + /* SWFLOW */ + else if (ch->ch_c_iflag & IXOFF && ch->ch_stops_sent) { + ch->ch_stops_sent = 0; + bd_ops->send_start_character(ch); + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "Sending start char!\n"); + } + } +} + +/* + * jsm_tty_write() + * + * Take data from the user or kernel and send it out to the FEP. + * In here exists all the Transparent Print magic as well. + */ +int jsm_tty_write(struct uart_port *port) +{ + int bufcount; + int data_count = 0,data_count1 =0; + u16 head; + u16 tail; + u16 tmask; + u32 remain; + int temp_tail = port->state->xmit.tail; + struct jsm_channel *channel = (struct jsm_channel *)port; + + tmask = WQUEUEMASK; + head = (channel->ch_w_head) & tmask; + tail = (channel->ch_w_tail) & tmask; + + if ((bufcount = tail - head - 1) < 0) + bufcount += WQUEUESIZE; + + bufcount = min(bufcount, 56); + remain = WQUEUESIZE - head; + + data_count = 0; + if (bufcount >= remain) { + bufcount -= remain; + while ((port->state->xmit.head != temp_tail) && + (data_count < remain)) { + channel->ch_wqueue[head++] = + port->state->xmit.buf[temp_tail]; + + temp_tail++; + temp_tail &= (UART_XMIT_SIZE - 1); + data_count++; + } + if (data_count == remain) head = 0; + } + + data_count1 = 0; + if (bufcount > 0) { + remain = bufcount; + while ((port->state->xmit.head != temp_tail) && + (data_count1 < remain)) { + channel->ch_wqueue[head++] = + port->state->xmit.buf[temp_tail]; + + temp_tail++; + temp_tail &= (UART_XMIT_SIZE - 1); + data_count1++; + + } + } + + port->state->xmit.tail = temp_tail; + + data_count += data_count1; + if (data_count) { + head &= tmask; + channel->ch_w_head = head; + } + + if (data_count) { + channel->ch_bd->bd_ops->copy_data_from_queue_to_uart(channel); + } + + return data_count; +} diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c new file mode 100644 index 000000000000..25a8bc565f40 --- /dev/null +++ b/drivers/tty/serial/kgdboc.c @@ -0,0 +1,328 @@ +/* + * Based on the same principle as kgdboe using the NETPOLL api, this + * driver uses a console polling api to implement a gdb serial inteface + * which is multiplexed on a console port. + * + * Maintainer: Jason Wessel + * + * 2007-2008 (c) Jason Wessel - Wind River Systems, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_CONFIG_LEN 40 + +static struct kgdb_io kgdboc_io_ops; + +/* -1 = init not run yet, 0 = unconfigured, 1 = configured. */ +static int configured = -1; + +static char config[MAX_CONFIG_LEN]; +static struct kparam_string kps = { + .string = config, + .maxlen = MAX_CONFIG_LEN, +}; + +static int kgdboc_use_kms; /* 1 if we use kernel mode switching */ +static struct tty_driver *kgdb_tty_driver; +static int kgdb_tty_line; + +#ifdef CONFIG_KDB_KEYBOARD +static int kgdboc_reset_connect(struct input_handler *handler, + struct input_dev *dev, + const struct input_device_id *id) +{ + input_reset_device(dev); + + /* Retrun an error - we do not want to bind, just to reset */ + return -ENODEV; +} + +static void kgdboc_reset_disconnect(struct input_handle *handle) +{ + /* We do not expect anyone to actually bind to us */ + BUG(); +} + +static const struct input_device_id kgdboc_reset_ids[] = { + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT, + .evbit = { BIT_MASK(EV_KEY) }, + }, + { } +}; + +static struct input_handler kgdboc_reset_handler = { + .connect = kgdboc_reset_connect, + .disconnect = kgdboc_reset_disconnect, + .name = "kgdboc_reset", + .id_table = kgdboc_reset_ids, +}; + +static DEFINE_MUTEX(kgdboc_reset_mutex); + +static void kgdboc_restore_input_helper(struct work_struct *dummy) +{ + /* + * We need to take a mutex to prevent several instances of + * this work running on different CPUs so they don't try + * to register again already registered handler. + */ + mutex_lock(&kgdboc_reset_mutex); + + if (input_register_handler(&kgdboc_reset_handler) == 0) + input_unregister_handler(&kgdboc_reset_handler); + + mutex_unlock(&kgdboc_reset_mutex); +} + +static DECLARE_WORK(kgdboc_restore_input_work, kgdboc_restore_input_helper); + +static void kgdboc_restore_input(void) +{ + if (likely(system_state == SYSTEM_RUNNING)) + schedule_work(&kgdboc_restore_input_work); +} + +static int kgdboc_register_kbd(char **cptr) +{ + if (strncmp(*cptr, "kbd", 3) == 0) { + if (kdb_poll_idx < KDB_POLL_FUNC_MAX) { + kdb_poll_funcs[kdb_poll_idx] = kdb_get_kbd_char; + kdb_poll_idx++; + if (cptr[0][3] == ',') + *cptr += 4; + else + return 1; + } + } + return 0; +} + +static void kgdboc_unregister_kbd(void) +{ + int i; + + for (i = 0; i < kdb_poll_idx; i++) { + if (kdb_poll_funcs[i] == kdb_get_kbd_char) { + kdb_poll_idx--; + kdb_poll_funcs[i] = kdb_poll_funcs[kdb_poll_idx]; + kdb_poll_funcs[kdb_poll_idx] = NULL; + i--; + } + } + flush_work_sync(&kgdboc_restore_input_work); +} +#else /* ! CONFIG_KDB_KEYBOARD */ +#define kgdboc_register_kbd(x) 0 +#define kgdboc_unregister_kbd() +#define kgdboc_restore_input() +#endif /* ! CONFIG_KDB_KEYBOARD */ + +static int kgdboc_option_setup(char *opt) +{ + if (strlen(opt) > MAX_CONFIG_LEN) { + printk(KERN_ERR "kgdboc: config string too long\n"); + return -ENOSPC; + } + strcpy(config, opt); + + return 0; +} + +__setup("kgdboc=", kgdboc_option_setup); + +static void cleanup_kgdboc(void) +{ + kgdboc_unregister_kbd(); + if (configured == 1) + kgdb_unregister_io_module(&kgdboc_io_ops); +} + +static int configure_kgdboc(void) +{ + struct tty_driver *p; + int tty_line = 0; + int err; + char *cptr = config; + struct console *cons; + + err = kgdboc_option_setup(config); + if (err || !strlen(config) || isspace(config[0])) + goto noconfig; + + err = -ENODEV; + kgdboc_io_ops.is_console = 0; + kgdb_tty_driver = NULL; + + kgdboc_use_kms = 0; + if (strncmp(cptr, "kms,", 4) == 0) { + cptr += 4; + kgdboc_use_kms = 1; + } + + if (kgdboc_register_kbd(&cptr)) + goto do_register; + + p = tty_find_polling_driver(cptr, &tty_line); + if (!p) + goto noconfig; + + cons = console_drivers; + while (cons) { + int idx; + if (cons->device && cons->device(cons, &idx) == p && + idx == tty_line) { + kgdboc_io_ops.is_console = 1; + break; + } + cons = cons->next; + } + + kgdb_tty_driver = p; + kgdb_tty_line = tty_line; + +do_register: + err = kgdb_register_io_module(&kgdboc_io_ops); + if (err) + goto noconfig; + + configured = 1; + + return 0; + +noconfig: + config[0] = 0; + configured = 0; + cleanup_kgdboc(); + + return err; +} + +static int __init init_kgdboc(void) +{ + /* Already configured? */ + if (configured == 1) + return 0; + + return configure_kgdboc(); +} + +static int kgdboc_get_char(void) +{ + if (!kgdb_tty_driver) + return -1; + return kgdb_tty_driver->ops->poll_get_char(kgdb_tty_driver, + kgdb_tty_line); +} + +static void kgdboc_put_char(u8 chr) +{ + if (!kgdb_tty_driver) + return; + kgdb_tty_driver->ops->poll_put_char(kgdb_tty_driver, + kgdb_tty_line, chr); +} + +static int param_set_kgdboc_var(const char *kmessage, struct kernel_param *kp) +{ + int len = strlen(kmessage); + + if (len >= MAX_CONFIG_LEN) { + printk(KERN_ERR "kgdboc: config string too long\n"); + return -ENOSPC; + } + + /* Only copy in the string if the init function has not run yet */ + if (configured < 0) { + strcpy(config, kmessage); + return 0; + } + + if (kgdb_connected) { + printk(KERN_ERR + "kgdboc: Cannot reconfigure while KGDB is connected.\n"); + + return -EBUSY; + } + + strcpy(config, kmessage); + /* Chop out \n char as a result of echo */ + if (config[len - 1] == '\n') + config[len - 1] = '\0'; + + if (configured == 1) + cleanup_kgdboc(); + + /* Go and configure with the new params. */ + return configure_kgdboc(); +} + +static int dbg_restore_graphics; + +static void kgdboc_pre_exp_handler(void) +{ + if (!dbg_restore_graphics && kgdboc_use_kms) { + dbg_restore_graphics = 1; + con_debug_enter(vc_cons[fg_console].d); + } + /* Increment the module count when the debugger is active */ + if (!kgdb_connected) + try_module_get(THIS_MODULE); +} + +static void kgdboc_post_exp_handler(void) +{ + /* decrement the module count when the debugger detaches */ + if (!kgdb_connected) + module_put(THIS_MODULE); + if (kgdboc_use_kms && dbg_restore_graphics) { + dbg_restore_graphics = 0; + con_debug_leave(); + } + kgdboc_restore_input(); +} + +static struct kgdb_io kgdboc_io_ops = { + .name = "kgdboc", + .read_char = kgdboc_get_char, + .write_char = kgdboc_put_char, + .pre_exception = kgdboc_pre_exp_handler, + .post_exception = kgdboc_post_exp_handler, +}; + +#ifdef CONFIG_KGDB_SERIAL_CONSOLE +/* This is only available if kgdboc is a built in for early debugging */ +static int __init kgdboc_early_init(char *opt) +{ + /* save the first character of the config string because the + * init routine can destroy it. + */ + char save_ch; + + kgdboc_option_setup(opt); + save_ch = config[0]; + init_kgdboc(); + config[0] = save_ch; + return 0; +} + +early_param("ekgdboc", kgdboc_early_init); +#endif /* CONFIG_KGDB_SERIAL_CONSOLE */ + +module_init(init_kgdboc); +module_exit(cleanup_kgdboc); +module_param_call(kgdboc, param_set_kgdboc_var, param_get_string, &kps, 0644); +MODULE_PARM_DESC(kgdboc, "[,baud]"); +MODULE_DESCRIPTION("KGDB Console TTY Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c new file mode 100644 index 000000000000..bea5c215460c --- /dev/null +++ b/drivers/tty/serial/m32r_sio.c @@ -0,0 +1,1192 @@ +/* + * m32r_sio.c + * + * Driver for M32R serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Based on drivers/serial/8250.c. + * + * Copyright (C) 2001 Russell King. + * Copyright (C) 2004 Hirokazu Takata + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* + * A note about mapbase / membase + * + * mapbase is the physical address of the IO port. Currently, we don't + * support this very well, and it may well be dropped from this driver + * in future. As such, mapbase should be NULL. + * + * membase is an 'ioremapped' cookie. This is compatible with the old + * serial.c driver, and is currently the preferred form. + */ + +#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define PORT_M32R_BASE PORT_M32R_SIO +#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1) +#define BAUD_RATE 115200 + +#include +#include "m32r_sio.h" +#include "m32r_sio_reg.h" + +/* + * Debugging. + */ +#if 0 +#define DEBUG_AUTOCONF(fmt...) printk(fmt) +#else +#define DEBUG_AUTOCONF(fmt...) do { } while (0) +#endif + +#if 0 +#define DEBUG_INTR(fmt...) printk(fmt) +#else +#define DEBUG_INTR(fmt...) do { } while (0) +#endif + +#define PASS_LIMIT 256 + +/* + * We default to IRQ0 for the "no irq" hack. Some + * machine types want others as well - they're free + * to redefine this in their header file. + */ +#define is_real_interrupt(irq) ((irq) != 0) + +#define BASE_BAUD 115200 + +/* Standard COM flags */ +#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST) + +/* + * SERIAL_PORT_DFNS tells us about built-in ports that have no + * standard enumeration mechanism. Platforms that can find all + * serial ports via mechanisms like ACPI or PCI need not supply it. + */ +#if defined(CONFIG_PLAT_USRV) + +#define SERIAL_PORT_DFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \ + { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */ + +#else /* !CONFIG_PLAT_USRV */ + +#if defined(CONFIG_SERIAL_M32R_PLDSIO) +#define SERIAL_PORT_DFNS \ + { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \ + STD_COM_FLAGS }, /* ttyS0 */ +#else +#define SERIAL_PORT_DFNS \ + { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \ + STD_COM_FLAGS }, /* ttyS0 */ +#endif + +#endif /* !CONFIG_PLAT_USRV */ + +static struct old_serial_port old_serial_port[] = { + SERIAL_PORT_DFNS +}; + +#define UART_NR ARRAY_SIZE(old_serial_port) + +struct uart_sio_port { + struct uart_port port; + struct timer_list timer; /* "no irq" timer */ + struct list_head list; /* ports on this IRQ */ + unsigned short rev; + unsigned char acr; + unsigned char ier; + unsigned char lcr; + unsigned char mcr_mask; /* mask of user bits */ + unsigned char mcr_force; /* mask of forced bits */ + unsigned char lsr_break_flag; + + /* + * We provide a per-port pm hook. + */ + void (*pm)(struct uart_port *port, + unsigned int state, unsigned int old); +}; + +struct irq_info { + spinlock_t lock; + struct list_head *head; +}; + +static struct irq_info irq_lists[NR_IRQS]; + +/* + * Here we define the default xmit fifo size used for each type of UART. + */ +static const struct serial_uart_config uart_config[] = { + [PORT_UNKNOWN] = { + .name = "unknown", + .dfl_xmit_fifo_size = 1, + .flags = 0, + }, + [PORT_INDEX(PORT_M32R_SIO)] = { + .name = "M32RSIO", + .dfl_xmit_fifo_size = 1, + .flags = 0, + }, +}; + +#ifdef CONFIG_SERIAL_M32R_PLDSIO + +#define __sio_in(x) inw((unsigned long)(x)) +#define __sio_out(v,x) outw((v),(unsigned long)(x)) + +static inline void sio_set_baud_rate(unsigned long baud) +{ + unsigned short sbaud; + sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1; + __sio_out(sbaud, PLD_ESIO0BAUR); +} + +static void sio_reset(void) +{ + unsigned short tmp; + + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0CR); + sio_set_baud_rate(BAUD_RATE); + __sio_out(0x0300, PLD_ESIO0CR); + __sio_out(0x0003, PLD_ESIO0CR); +} + +static void sio_init(void) +{ + unsigned short tmp; + + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0CR); + __sio_out(0x0300, PLD_ESIO0CR); + __sio_out(0x0003, PLD_ESIO0CR); +} + +static void sio_error(int *status) +{ + printk("SIO0 error[%04x]\n", *status); + do { + sio_init(); + } while ((*status = __sio_in(PLD_ESIO0CR)) != 3); +} + +#else /* not CONFIG_SERIAL_M32R_PLDSIO */ + +#define __sio_in(x) inl(x) +#define __sio_out(v,x) outl((v),(x)) + +static inline void sio_set_baud_rate(unsigned long baud) +{ + unsigned long i, j; + + i = boot_cpu_data.bus_clock / (baud * 16); + j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud; + i -= 1; + j = (j + 1) >> 1; + + __sio_out(i, M32R_SIO0_BAUR_PORTL); + __sio_out(j, M32R_SIO0_RBAUR_PORTL); +} + +static void sio_reset(void) +{ + __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */ + __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */ + __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */ + sio_set_baud_rate(BAUD_RATE); + __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL); + __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */ +} + +static void sio_init(void) +{ + unsigned int tmp; + + tmp = __sio_in(M32R_SIO0_RXB_PORTL); + tmp = __sio_in(M32R_SIO0_RXB_PORTL); + tmp = __sio_in(M32R_SIO0_STS_PORTL); + __sio_out(0x00000003, M32R_SIO0_CR_PORTL); +} + +static void sio_error(int *status) +{ + printk("SIO0 error[%04x]\n", *status); + do { + sio_init(); + } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3); +} + +#endif /* CONFIG_SERIAL_M32R_PLDSIO */ + +static unsigned int sio_in(struct uart_sio_port *up, int offset) +{ + return __sio_in(up->port.iobase + offset); +} + +static void sio_out(struct uart_sio_port *up, int offset, int value) +{ + __sio_out(value, up->port.iobase + offset); +} + +static unsigned int serial_in(struct uart_sio_port *up, int offset) +{ + if (!offset) + return 0; + + return __sio_in(offset); +} + +static void serial_out(struct uart_sio_port *up, int offset, int value) +{ + if (!offset) + return; + + __sio_out(value, offset); +} + +static void m32r_sio_stop_tx(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void m32r_sio_start_tx(struct uart_port *port) +{ +#ifdef CONFIG_SERIAL_M32R_PLDSIO + struct uart_sio_port *up = (struct uart_sio_port *)port; + struct circ_buf *xmit = &up->port.state->xmit; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + } + while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY); +#else + struct uart_sio_port *up = (struct uart_sio_port *)port; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +#endif +} + +static void m32r_sio_stop_rx(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static void m32r_sio_enable_ms(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static void receive_chars(struct uart_sio_port *up, int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned char ch; + unsigned char flag; + int max_count = 256; + + do { + ch = sio_in(up, SIORXB); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + *status &= up->port.read_status_mask; + + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } + + if (*status & UART_LSR_BI) { + DEBUG_INTR("handling break...."); + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + if ((*status & up->port.ignore_status_mask) == 0) + tty_insert_flip_char(tty, ch, flag); + + if (*status & UART_LSR_OE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + ignore_char: + *status = serial_in(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + tty_flip_buffer_push(tty); +} + +static void transmit_chars(struct uart_sio_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { +#ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */ + serial_out(up, UART_TX, up->port.x_char); +#endif + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + m32r_sio_stop_tx(&up->port); + return; + } + + count = up->port.fifosize; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + while (!(serial_in(up, UART_LSR) & UART_LSR_THRE)); + + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + DEBUG_INTR("THRE..."); + + if (uart_circ_empty(xmit)) + m32r_sio_stop_tx(&up->port); +} + +/* + * This handles the interrupt from one port. + */ +static inline void m32r_sio_handle_port(struct uart_sio_port *up, + unsigned int status) +{ + DEBUG_INTR("status = %x...", status); + + if (status & 0x04) + receive_chars(up, &status); + if (status & 0x01) + transmit_chars(up); +} + +/* + * This is the serial driver's interrupt routine. + * + * Arjan thinks the old way was overly complex, so it got simplified. + * Alan disagrees, saying that need the complexity to handle the weird + * nature of ISA shared interrupts. (This is a special exception.) + * + * In order to handle ISA shared interrupts properly, we need to check + * that all ports have been serviced, and therefore the ISA interrupt + * line has been de-asserted. + * + * This means we need to loop through all ports. checking that they + * don't have an interrupt pending. + */ +static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id) +{ + struct irq_info *i = dev_id; + struct list_head *l, *end = NULL; + int pass_counter = 0; + + DEBUG_INTR("m32r_sio_interrupt(%d)...", irq); + +#ifdef CONFIG_SERIAL_M32R_PLDSIO +// if (irq == PLD_IRQ_SIO0_SND) +// irq = PLD_IRQ_SIO0_RCV; +#else + if (irq == M32R_IRQ_SIO0_S) + irq = M32R_IRQ_SIO0_R; +#endif + + spin_lock(&i->lock); + + l = i->head; + do { + struct uart_sio_port *up; + unsigned int sts; + + up = list_entry(l, struct uart_sio_port, list); + + sts = sio_in(up, SIOSTS); + if (sts & 0x5) { + spin_lock(&up->port.lock); + m32r_sio_handle_port(up, sts); + spin_unlock(&up->port.lock); + + end = NULL; + } else if (end == NULL) + end = l; + + l = l->next; + + if (l == i->head && pass_counter++ > PASS_LIMIT) { + if (sts & 0xe0) + sio_error(&sts); + break; + } + } while (l != end); + + spin_unlock(&i->lock); + + DEBUG_INTR("end.\n"); + + return IRQ_HANDLED; +} + +/* + * To support ISA shared interrupts, we need to have one interrupt + * handler that ensures that the IRQ line has been deasserted + * before returning. Failing to do this will result in the IRQ + * line being stuck active, and, since ISA irqs are edge triggered, + * no more IRQs will be seen. + */ +static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up) +{ + spin_lock_irq(&i->lock); + + if (!list_empty(i->head)) { + if (i->head == &up->list) + i->head = i->head->next; + list_del(&up->list); + } else { + BUG_ON(i->head != &up->list); + i->head = NULL; + } + + spin_unlock_irq(&i->lock); +} + +static int serial_link_irq_chain(struct uart_sio_port *up) +{ + struct irq_info *i = irq_lists + up->port.irq; + int ret, irq_flags = 0; + + spin_lock_irq(&i->lock); + + if (i->head) { + list_add(&up->list, i->head); + spin_unlock_irq(&i->lock); + + ret = 0; + } else { + INIT_LIST_HEAD(&up->list); + i->head = &up->list; + spin_unlock_irq(&i->lock); + + ret = request_irq(up->port.irq, m32r_sio_interrupt, + irq_flags, "SIO0-RX", i); + ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt, + irq_flags, "SIO0-TX", i); + if (ret < 0) + serial_do_unlink(i, up); + } + + return ret; +} + +static void serial_unlink_irq_chain(struct uart_sio_port *up) +{ + struct irq_info *i = irq_lists + up->port.irq; + + BUG_ON(i->head == NULL); + + if (list_empty(i->head)) { + free_irq(up->port.irq, i); + free_irq(up->port.irq + 1, i); + } + + serial_do_unlink(i, up); +} + +/* + * This function is used to handle ports that do not have an interrupt. + */ +static void m32r_sio_timeout(unsigned long data) +{ + struct uart_sio_port *up = (struct uart_sio_port *)data; + unsigned int timeout; + unsigned int sts; + + sts = sio_in(up, SIOSTS); + if (sts & 0x5) { + spin_lock(&up->port.lock); + m32r_sio_handle_port(up, sts); + spin_unlock(&up->port.lock); + } + + timeout = up->port.timeout; + timeout = timeout > 6 ? (timeout / 2 - 2) : 1; + mod_timer(&up->timer, jiffies + timeout); +} + +static unsigned int m32r_sio_tx_empty(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int m32r_sio_get_mctrl(struct uart_port *port) +{ + return 0; +} + +static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + +} + +static void m32r_sio_break_ctl(struct uart_port *port, int break_state) +{ + +} + +static int m32r_sio_startup(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + int retval; + + sio_init(); + + /* + * If the "interrupt" for this port doesn't correspond with any + * hardware interrupt, we use a timer-based system. The original + * driver used to do this with IRQ0. + */ + if (!is_real_interrupt(up->port.irq)) { + unsigned int timeout = up->port.timeout; + + timeout = timeout > 6 ? (timeout / 2 - 2) : 1; + + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + timeout); + } else { + retval = serial_link_irq_chain(up); + if (retval) + return retval; + } + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + * - M32R_SIO: 0x0c + * - M32R_PLDSIO: 0x04 + */ + up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; + sio_out(up, SIOTRCR, up->ier); + + /* + * And clear the interrupt registers again for luck. + */ + sio_reset(); + + return 0; +} + +static void m32r_sio_shutdown(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + /* + * Disable interrupts from this port + */ + up->ier = 0; + sio_out(up, SIOTRCR, 0); + + /* + * Disable break condition and FIFOs + */ + + sio_init(); + + if (!is_real_interrupt(up->port.irq)) + del_timer_sync(&up->timer); + else + serial_unlink_irq_chain(up); +} + +static unsigned int m32r_sio_get_divisor(struct uart_port *port, + unsigned int baud) +{ + return uart_get_divisor(port, baud); +} + +static void m32r_sio_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned char cval = 0; + unsigned long flags; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (termios->c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* + * Ask the core to calculate the divisor for us. + */ +#ifdef CONFIG_SERIAL_M32R_PLDSIO + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4); +#else + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); +#endif + quot = m32r_sio_get_divisor(port, baud); + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + sio_set_baud_rate(baud); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + up->lcr = cval; /* Save LCR */ + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void m32r_sio_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + if (up->pm) + up->pm(port, state, oldstate); +} + +/* + * Resource handling. This is complicated by the fact that resources + * depend on the port type. Maybe we should be claiming the standard + * 8250 ports, and then trying to get other resources as necessary? + */ +static int +m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res) +{ + unsigned int size = 8 << up->port.regshift; +#ifndef CONFIG_SERIAL_M32R_PLDSIO + unsigned long start; +#endif + int ret = 0; + + switch (up->port.iotype) { + case UPIO_MEM: + if (up->port.mapbase) { +#ifdef CONFIG_SERIAL_M32R_PLDSIO + *res = request_mem_region(up->port.mapbase, size, "serial"); +#else + start = up->port.mapbase; + *res = request_mem_region(start, size, "serial"); +#endif + if (!*res) + ret = -EBUSY; + } + break; + + case UPIO_PORT: + *res = request_region(up->port.iobase, size, "serial"); + if (!*res) + ret = -EBUSY; + break; + } + return ret; +} + +static void m32r_sio_release_port(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned long start, offset = 0, size = 0; + + size <<= up->port.regshift; + + switch (up->port.iotype) { + case UPIO_MEM: + if (up->port.mapbase) { + /* + * Unmap the area. + */ + iounmap(up->port.membase); + up->port.membase = NULL; + + start = up->port.mapbase; + + if (size) + release_mem_region(start + offset, size); + release_mem_region(start, 8 << up->port.regshift); + } + break; + + case UPIO_PORT: + start = up->port.iobase; + + if (size) + release_region(start + offset, size); + release_region(start + offset, 8 << up->port.regshift); + break; + + default: + break; + } +} + +static int m32r_sio_request_port(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + struct resource *res = NULL; + int ret = 0; + + ret = m32r_sio_request_std_resource(up, &res); + + /* + * If we have a mapbase, then request that as well. + */ + if (ret == 0 && up->port.flags & UPF_IOREMAP) { + int size = res->end - res->start + 1; + + up->port.membase = ioremap(up->port.mapbase, size); + if (!up->port.membase) + ret = -ENOMEM; + } + + if (ret < 0) { + if (res) + release_resource(res); + } + + return ret; +} + +static void m32r_sio_config_port(struct uart_port *port, int flags) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + spin_lock_irqsave(&up->port.lock, flags); + + up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1); + up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int +m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->irq >= nr_irqs || ser->irq < 0 || + ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || + ser->type >= ARRAY_SIZE(uart_config)) + return -EINVAL; + return 0; +} + +static const char * +m32r_sio_type(struct uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static struct uart_ops m32r_sio_pops = { + .tx_empty = m32r_sio_tx_empty, + .set_mctrl = m32r_sio_set_mctrl, + .get_mctrl = m32r_sio_get_mctrl, + .stop_tx = m32r_sio_stop_tx, + .start_tx = m32r_sio_start_tx, + .stop_rx = m32r_sio_stop_rx, + .enable_ms = m32r_sio_enable_ms, + .break_ctl = m32r_sio_break_ctl, + .startup = m32r_sio_startup, + .shutdown = m32r_sio_shutdown, + .set_termios = m32r_sio_set_termios, + .pm = m32r_sio_pm, + .type = m32r_sio_type, + .release_port = m32r_sio_release_port, + .request_port = m32r_sio_request_port, + .config_port = m32r_sio_config_port, + .verify_port = m32r_sio_verify_port, +}; + +static struct uart_sio_port m32r_sio_ports[UART_NR]; + +static void __init m32r_sio_init_ports(void) +{ + struct uart_sio_port *up; + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port); + i++, up++) { + up->port.iobase = old_serial_port[i].port; + up->port.irq = irq_canonicalize(old_serial_port[i].irq); + up->port.uartclk = old_serial_port[i].baud_base * 16; + up->port.flags = old_serial_port[i].flags; + up->port.membase = old_serial_port[i].iomem_base; + up->port.iotype = old_serial_port[i].io_type; + up->port.regshift = old_serial_port[i].iomem_reg_shift; + up->port.ops = &m32r_sio_pops; + } +} + +static void __init m32r_sio_register_ports(struct uart_driver *drv) +{ + int i; + + m32r_sio_init_ports(); + + for (i = 0; i < UART_NR; i++) { + struct uart_sio_port *up = &m32r_sio_ports[i]; + + up->port.line = i; + up->port.ops = &m32r_sio_pops; + init_timer(&up->timer); + up->timer.function = m32r_sio_timeout; + + /* + * ALPHA_KLUDGE_MCR needs to be killed. + */ + up->mcr_mask = ~ALPHA_KLUDGE_MCR; + up->mcr_force = ALPHA_KLUDGE_MCR; + + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE + +/* + * Wait for transmitter & holding register to empty + */ +static inline void wait_for_xmitr(struct uart_sio_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = sio_in(up, SIOSTS); + + if (--tmout == 0) + break; + udelay(1); + } while ((status & UART_EMPTY) != UART_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout) + udelay(1); + } +} + +static void m32r_sio_console_putchar(struct uart_port *port, int ch) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + wait_for_xmitr(up); + sio_out(up, SIOTXB, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void m32r_sio_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_sio_port *up = &m32r_sio_ports[co->index]; + unsigned int ier; + + /* + * First save the UER then disable the interrupts + */ + ier = sio_in(up, SIOTRCR); + sio_out(up, SIOTRCR, 0); + + uart_console_write(&up->port, s, count, m32r_sio_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + sio_out(up, SIOTRCR, ier); +} + +static int __init m32r_sio_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + port = &m32r_sio_ports[co->index].port; + + /* + * Temporary fix. + */ + spin_lock_init(&port->lock); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver m32r_sio_reg; +static struct console m32r_sio_console = { + .name = "ttyS", + .write = m32r_sio_console_write, + .device = uart_console_device, + .setup = m32r_sio_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &m32r_sio_reg, +}; + +static int __init m32r_sio_console_init(void) +{ + sio_reset(); + sio_init(); + m32r_sio_init_ports(); + register_console(&m32r_sio_console); + return 0; +} +console_initcall(m32r_sio_console_init); + +#define M32R_SIO_CONSOLE &m32r_sio_console +#else +#define M32R_SIO_CONSOLE NULL +#endif + +static struct uart_driver m32r_sio_reg = { + .owner = THIS_MODULE, + .driver_name = "sio", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = UART_NR, + .cons = M32R_SIO_CONSOLE, +}; + +/** + * m32r_sio_suspend_port - suspend one serial port + * @line: serial line number + * + * Suspend one serial port. + */ +void m32r_sio_suspend_port(int line) +{ + uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port); +} + +/** + * m32r_sio_resume_port - resume one serial port + * @line: serial line number + * + * Resume one serial port. + */ +void m32r_sio_resume_port(int line) +{ + uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port); +} + +static int __init m32r_sio_init(void) +{ + int ret, i; + + printk(KERN_INFO "Serial: M32R SIO driver\n"); + + for (i = 0; i < nr_irqs; i++) + spin_lock_init(&irq_lists[i].lock); + + ret = uart_register_driver(&m32r_sio_reg); + if (ret >= 0) + m32r_sio_register_ports(&m32r_sio_reg); + + return ret; +} + +static void __exit m32r_sio_exit(void) +{ + int i; + + for (i = 0; i < UART_NR; i++) + uart_remove_one_port(&m32r_sio_reg, &m32r_sio_ports[i].port); + + uart_unregister_driver(&m32r_sio_reg); +} + +module_init(m32r_sio_init); +module_exit(m32r_sio_exit); + +EXPORT_SYMBOL(m32r_sio_suspend_port); +EXPORT_SYMBOL(m32r_sio_resume_port); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic M32R SIO serial driver"); diff --git a/drivers/tty/serial/m32r_sio.h b/drivers/tty/serial/m32r_sio.h new file mode 100644 index 000000000000..e9b7e11793b1 --- /dev/null +++ b/drivers/tty/serial/m32r_sio.h @@ -0,0 +1,48 @@ +/* + * m32r_sio.h + * + * Driver for M32R serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Based on drivers/serial/8250.h. + * + * Copyright (C) 2001 Russell King. + * Copyright (C) 2004 Hirokazu Takata + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + + +struct m32r_sio_probe { + struct module *owner; + int (*pci_init_one)(struct pci_dev *dev); + void (*pci_remove_one)(struct pci_dev *dev); + void (*pnp_init)(void); +}; + +int m32r_sio_register_probe(struct m32r_sio_probe *probe); +void m32r_sio_unregister_probe(struct m32r_sio_probe *probe); +void m32r_sio_get_irq_map(unsigned int *map); +void m32r_sio_suspend_port(int line); +void m32r_sio_resume_port(int line); + +struct old_serial_port { + unsigned int uart; + unsigned int baud_base; + unsigned int port; + unsigned int irq; + unsigned int flags; + unsigned char io_type; + unsigned char __iomem *iomem_base; + unsigned short iomem_reg_shift; +}; + +#define _INLINE_ inline + +#define PROBE_RSA (1 << 0) +#define PROBE_ANY (~0) + +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) diff --git a/drivers/tty/serial/m32r_sio_reg.h b/drivers/tty/serial/m32r_sio_reg.h new file mode 100644 index 000000000000..4671473793e3 --- /dev/null +++ b/drivers/tty/serial/m32r_sio_reg.h @@ -0,0 +1,152 @@ +/* + * m32r_sio_reg.h + * + * Copyright (C) 1992, 1994 by Theodore Ts'o. + * Copyright (C) 2004 Hirokazu Takata + * + * Redistribution of this file is permitted under the terms of the GNU + * Public License (GPL) + * + * These are the UART port assignments, expressed as offsets from the base + * register. These assignments should hold for any serial port based on + * a 8250, 16450, or 16550(A). + */ + +#ifndef _M32R_SIO_REG_H +#define _M32R_SIO_REG_H + + +#ifdef CONFIG_SERIAL_M32R_PLDSIO + +#define SIOCR 0x000 +#define SIOMOD0 0x002 +#define SIOMOD1 0x004 +#define SIOSTS 0x006 +#define SIOTRCR 0x008 +#define SIOBAUR 0x00a +// #define SIORBAUR 0x018 +#define SIOTXB 0x00c +#define SIORXB 0x00e + +#define UART_RX ((unsigned long) PLD_ESIO0RXB) + /* In: Receive buffer (DLAB=0) */ +#define UART_TX ((unsigned long) PLD_ESIO0TXB) + /* Out: Transmit buffer (DLAB=0) */ +#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ +#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx + * In: Fifo count + * Out: Fifo custom trigger levels + * XR16C85x only */ + +#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ +#define UART_IER ((unsigned long) PLD_ESIO0INTCR) + /* Out: Interrupt Enable Register */ +#define UART_FCTR 0 /* (LCR=BF) Feature Control Register + * XR16C85x only */ + +#define UART_IIR 0 /* In: Interrupt ID Register */ +#define UART_FCR 0 /* Out: FIFO Control Register */ +#define UART_EFR 0 /* I/O: Extended Features Register */ + /* (DLAB=1, 16C660 only) */ + +#define UART_LCR 0 /* Out: Line Control Register */ +#define UART_MCR 0 /* Out: Modem Control Register */ +#define UART_LSR ((unsigned long) PLD_ESIO0STS) + /* In: Line Status Register */ +#define UART_MSR 0 /* In: Modem Status Register */ +#define UART_SCR 0 /* I/O: Scratch Register */ +#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register + * FCTR bit 6 selects SCR or EMSR + * XR16c85x only */ + +#else /* not CONFIG_SERIAL_M32R_PLDSIO */ + +#define SIOCR 0x000 +#define SIOMOD0 0x004 +#define SIOMOD1 0x008 +#define SIOSTS 0x00c +#define SIOTRCR 0x010 +#define SIOBAUR 0x014 +#define SIORBAUR 0x018 +#define SIOTXB 0x01c +#define SIORXB 0x020 + +#define UART_RX M32R_SIO0_RXB_PORTL /* In: Receive buffer (DLAB=0) */ +#define UART_TX M32R_SIO0_TXB_PORTL /* Out: Transmit buffer (DLAB=0) */ +#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ +#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx + * In: Fifo count + * Out: Fifo custom trigger levels + * XR16C85x only */ + +#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ +#define UART_IER M32R_SIO0_TRCR_PORTL /* Out: Interrupt Enable Register */ +#define UART_FCTR 0 /* (LCR=BF) Feature Control Register + * XR16C85x only */ + +#define UART_IIR 0 /* In: Interrupt ID Register */ +#define UART_FCR 0 /* Out: FIFO Control Register */ +#define UART_EFR 0 /* I/O: Extended Features Register */ + /* (DLAB=1, 16C660 only) */ + +#define UART_LCR 0 /* Out: Line Control Register */ +#define UART_MCR 0 /* Out: Modem Control Register */ +#define UART_LSR M32R_SIO0_STS_PORTL /* In: Line Status Register */ +#define UART_MSR 0 /* In: Modem Status Register */ +#define UART_SCR 0 /* I/O: Scratch Register */ +#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register + * FCTR bit 6 selects SCR or EMSR + * XR16c85x only */ + +#endif /* CONFIG_SERIAL_M32R_PLDSIO */ + +#define UART_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * These are the definitions for the Line Control Register + * + * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting + * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. + */ +#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ +#define UART_LCR_SBC 0x40 /* Set break control */ +#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ +#define UART_LCR_EPAR 0x10 /* Even parity select */ +#define UART_LCR_PARITY 0x08 /* Parity Enable */ +#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ +#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ +#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ +#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ +#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ + +/* + * These are the definitions for the Line Status Register + */ +#define UART_LSR_TEMT 0x02 /* Transmitter empty */ +#define UART_LSR_THRE 0x01 /* Transmit-hold-register empty */ +#define UART_LSR_BI 0x00 /* Break interrupt indicator */ +#define UART_LSR_FE 0x80 /* Frame error indicator */ +#define UART_LSR_PE 0x40 /* Parity error indicator */ +#define UART_LSR_OE 0x20 /* Overrun error indicator */ +#define UART_LSR_DR 0x04 /* Receiver data ready */ + +/* + * These are the definitions for the Interrupt Identification Register + */ +#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ +#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ + +#define UART_IIR_MSI 0x00 /* Modem status interrupt */ +#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ +#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ +#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ + +/* + * These are the definitions for the Interrupt Enable Register + */ +#define UART_IER_MSI 0x00 /* Enable Modem status interrupt */ +#define UART_IER_RLSI 0x08 /* Enable receiver line status interrupt */ +#define UART_IER_THRI 0x03 /* Enable Transmitter holding register int. */ +#define UART_IER_RDI 0x04 /* Enable receiver data interrupt */ + +#endif /* _M32R_SIO_REG_H */ diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c new file mode 100644 index 000000000000..beb1afa27d8d --- /dev/null +++ b/drivers/tty/serial/max3100.c @@ -0,0 +1,926 @@ +/* + * + * Copyright (C) 2008 Christian Pellegrin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * + * Notes: the MAX3100 doesn't provide an interrupt on CTS so we have + * to use polling for flow control. TX empty IRQ is unusable, since + * writing conf clears FIFO buffer and we cannot have this interrupt + * always asking us for attention. + * + * Example platform data: + + static struct plat_max3100 max3100_plat_data = { + .loopback = 0, + .crystal = 0, + .poll_time = 100, + }; + + static struct spi_board_info spi_board_info[] = { + { + .modalias = "max3100", + .platform_data = &max3100_plat_data, + .irq = IRQ_EINT12, + .max_speed_hz = 5*1000*1000, + .chip_select = 0, + }, + }; + + * The initial minor number is 209 in the low-density serial port: + * mknod /dev/ttyMAX0 c 204 209 + */ + +#define MAX3100_MAJOR 204 +#define MAX3100_MINOR 209 +/* 4 MAX3100s should be enough for everyone */ +#define MAX_MAX3100 4 + +#include +#include +#include +#include +#include +#include +#include + +#include + +#define MAX3100_C (1<<14) +#define MAX3100_D (0<<14) +#define MAX3100_W (1<<15) +#define MAX3100_RX (0<<15) + +#define MAX3100_WC (MAX3100_W | MAX3100_C) +#define MAX3100_RC (MAX3100_RX | MAX3100_C) +#define MAX3100_WD (MAX3100_W | MAX3100_D) +#define MAX3100_RD (MAX3100_RX | MAX3100_D) +#define MAX3100_CMD (3 << 14) + +#define MAX3100_T (1<<14) +#define MAX3100_R (1<<15) + +#define MAX3100_FEN (1<<13) +#define MAX3100_SHDN (1<<12) +#define MAX3100_TM (1<<11) +#define MAX3100_RM (1<<10) +#define MAX3100_PM (1<<9) +#define MAX3100_RAM (1<<8) +#define MAX3100_IR (1<<7) +#define MAX3100_ST (1<<6) +#define MAX3100_PE (1<<5) +#define MAX3100_L (1<<4) +#define MAX3100_BAUD (0xf) + +#define MAX3100_TE (1<<10) +#define MAX3100_RAFE (1<<10) +#define MAX3100_RTS (1<<9) +#define MAX3100_CTS (1<<9) +#define MAX3100_PT (1<<8) +#define MAX3100_DATA (0xff) + +#define MAX3100_RT (MAX3100_R | MAX3100_T) +#define MAX3100_RTC (MAX3100_RT | MAX3100_CTS | MAX3100_RAFE) + +/* the following simulate a status reg for ignore_status_mask */ +#define MAX3100_STATUS_PE 1 +#define MAX3100_STATUS_FE 2 +#define MAX3100_STATUS_OE 4 + +struct max3100_port { + struct uart_port port; + struct spi_device *spi; + + int cts; /* last CTS received for flow ctrl */ + int tx_empty; /* last TX empty bit */ + + spinlock_t conf_lock; /* shared data */ + int conf_commit; /* need to make changes */ + int conf; /* configuration for the MAX31000 + * (bits 0-7, bits 8-11 are irqs) */ + int rts_commit; /* need to change rts */ + int rts; /* rts status */ + int baud; /* current baud rate */ + + int parity; /* keeps track if we should send parity */ +#define MAX3100_PARITY_ON 1 +#define MAX3100_PARITY_ODD 2 +#define MAX3100_7BIT 4 + int rx_enabled; /* if we should rx chars */ + + int irq; /* irq assigned to the max3100 */ + + int minor; /* minor number */ + int crystal; /* 1 if 3.6864Mhz crystal 0 for 1.8432 */ + int loopback; /* 1 if we are in loopback mode */ + + /* for handling irqs: need workqueue since we do spi_sync */ + struct workqueue_struct *workqueue; + struct work_struct work; + /* set to 1 to make the workhandler exit as soon as possible */ + int force_end_work; + /* need to know we are suspending to avoid deadlock on workqueue */ + int suspending; + + /* hook for suspending MAX3100 via dedicated pin */ + void (*max3100_hw_suspend) (int suspend); + + /* poll time (in ms) for ctrl lines */ + int poll_time; + /* and its timer */ + struct timer_list timer; +}; + +static struct max3100_port *max3100s[MAX_MAX3100]; /* the chips */ +static DEFINE_MUTEX(max3100s_lock); /* race on probe */ + +static int max3100_do_parity(struct max3100_port *s, u16 c) +{ + int parity; + + if (s->parity & MAX3100_PARITY_ODD) + parity = 1; + else + parity = 0; + + if (s->parity & MAX3100_7BIT) + c &= 0x7f; + else + c &= 0xff; + + parity = parity ^ (hweight8(c) & 1); + return parity; +} + +static int max3100_check_parity(struct max3100_port *s, u16 c) +{ + return max3100_do_parity(s, c) == ((c >> 8) & 1); +} + +static void max3100_calc_parity(struct max3100_port *s, u16 *c) +{ + if (s->parity & MAX3100_7BIT) + *c &= 0x7f; + else + *c &= 0xff; + + if (s->parity & MAX3100_PARITY_ON) + *c |= max3100_do_parity(s, *c) << 8; +} + +static void max3100_work(struct work_struct *w); + +static void max3100_dowork(struct max3100_port *s) +{ + if (!s->force_end_work && !work_pending(&s->work) && + !freezing(current) && !s->suspending) + queue_work(s->workqueue, &s->work); +} + +static void max3100_timeout(unsigned long data) +{ + struct max3100_port *s = (struct max3100_port *)data; + + if (s->port.state) { + max3100_dowork(s); + mod_timer(&s->timer, jiffies + s->poll_time); + } +} + +static int max3100_sr(struct max3100_port *s, u16 tx, u16 *rx) +{ + struct spi_message message; + u16 etx, erx; + int status; + struct spi_transfer tran = { + .tx_buf = &etx, + .rx_buf = &erx, + .len = 2, + }; + + etx = cpu_to_be16(tx); + spi_message_init(&message); + spi_message_add_tail(&tran, &message); + status = spi_sync(s->spi, &message); + if (status) { + dev_warn(&s->spi->dev, "error while calling spi_sync\n"); + return -EIO; + } + *rx = be16_to_cpu(erx); + s->tx_empty = (*rx & MAX3100_T) > 0; + dev_dbg(&s->spi->dev, "%04x - %04x\n", tx, *rx); + return 0; +} + +static int max3100_handlerx(struct max3100_port *s, u16 rx) +{ + unsigned int ch, flg, status = 0; + int ret = 0, cts; + + if (rx & MAX3100_R && s->rx_enabled) { + dev_dbg(&s->spi->dev, "%s\n", __func__); + ch = rx & (s->parity & MAX3100_7BIT ? 0x7f : 0xff); + if (rx & MAX3100_RAFE) { + s->port.icount.frame++; + flg = TTY_FRAME; + status |= MAX3100_STATUS_FE; + } else { + if (s->parity & MAX3100_PARITY_ON) { + if (max3100_check_parity(s, rx)) { + s->port.icount.rx++; + flg = TTY_NORMAL; + } else { + s->port.icount.parity++; + flg = TTY_PARITY; + status |= MAX3100_STATUS_PE; + } + } else { + s->port.icount.rx++; + flg = TTY_NORMAL; + } + } + uart_insert_char(&s->port, status, MAX3100_STATUS_OE, ch, flg); + ret = 1; + } + + cts = (rx & MAX3100_CTS) > 0; + if (s->cts != cts) { + s->cts = cts; + uart_handle_cts_change(&s->port, cts ? TIOCM_CTS : 0); + } + + return ret; +} + +static void max3100_work(struct work_struct *w) +{ + struct max3100_port *s = container_of(w, struct max3100_port, work); + int rxchars; + u16 tx, rx; + int conf, cconf, rts, crts; + struct circ_buf *xmit = &s->port.state->xmit; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + rxchars = 0; + do { + spin_lock(&s->conf_lock); + conf = s->conf; + cconf = s->conf_commit; + s->conf_commit = 0; + rts = s->rts; + crts = s->rts_commit; + s->rts_commit = 0; + spin_unlock(&s->conf_lock); + if (cconf) + max3100_sr(s, MAX3100_WC | conf, &rx); + if (crts) { + max3100_sr(s, MAX3100_WD | MAX3100_TE | + (s->rts ? MAX3100_RTS : 0), &rx); + rxchars += max3100_handlerx(s, rx); + } + + max3100_sr(s, MAX3100_RD, &rx); + rxchars += max3100_handlerx(s, rx); + + if (rx & MAX3100_T) { + tx = 0xffff; + if (s->port.x_char) { + tx = s->port.x_char; + s->port.icount.tx++; + s->port.x_char = 0; + } else if (!uart_circ_empty(xmit) && + !uart_tx_stopped(&s->port)) { + tx = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & + (UART_XMIT_SIZE - 1); + s->port.icount.tx++; + } + if (tx != 0xffff) { + max3100_calc_parity(s, &tx); + tx |= MAX3100_WD | (s->rts ? MAX3100_RTS : 0); + max3100_sr(s, tx, &rx); + rxchars += max3100_handlerx(s, rx); + } + } + + if (rxchars > 16 && s->port.state->port.tty != NULL) { + tty_flip_buffer_push(s->port.state->port.tty); + rxchars = 0; + } + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); + + } while (!s->force_end_work && + !freezing(current) && + ((rx & MAX3100_R) || + (!uart_circ_empty(xmit) && + !uart_tx_stopped(&s->port)))); + + if (rxchars > 0 && s->port.state->port.tty != NULL) + tty_flip_buffer_push(s->port.state->port.tty); +} + +static irqreturn_t max3100_irq(int irqno, void *dev_id) +{ + struct max3100_port *s = dev_id; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + max3100_dowork(s); + return IRQ_HANDLED; +} + +static void max3100_enable_ms(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + if (s->poll_time > 0) + mod_timer(&s->timer, jiffies); + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static void max3100_start_tx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + max3100_dowork(s); +} + +static void max3100_stop_rx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + s->rx_enabled = 0; + spin_lock(&s->conf_lock); + s->conf &= ~MAX3100_RM; + s->conf_commit = 1; + spin_unlock(&s->conf_lock); + max3100_dowork(s); +} + +static unsigned int max3100_tx_empty(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + /* may not be truly up-to-date */ + max3100_dowork(s); + return s->tx_empty; +} + +static unsigned int max3100_get_mctrl(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + /* may not be truly up-to-date */ + max3100_dowork(s); + /* always assert DCD and DSR since these lines are not wired */ + return (s->cts ? TIOCM_CTS : 0) | TIOCM_DSR | TIOCM_CAR; +} + +static void max3100_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int rts; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + rts = (mctrl & TIOCM_RTS) > 0; + + spin_lock(&s->conf_lock); + if (s->rts != rts) { + s->rts = rts; + s->rts_commit = 1; + max3100_dowork(s); + } + spin_unlock(&s->conf_lock); +} + +static void +max3100_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int baud = 0; + unsigned cflag; + u32 param_new, param_mask, parity = 0; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + cflag = termios->c_cflag; + param_new = 0; + param_mask = 0; + + baud = tty_termios_baud_rate(termios); + param_new = s->conf & MAX3100_BAUD; + switch (baud) { + case 300: + if (s->crystal) + baud = s->baud; + else + param_new = 15; + break; + case 600: + param_new = 14 + s->crystal; + break; + case 1200: + param_new = 13 + s->crystal; + break; + case 2400: + param_new = 12 + s->crystal; + break; + case 4800: + param_new = 11 + s->crystal; + break; + case 9600: + param_new = 10 + s->crystal; + break; + case 19200: + param_new = 9 + s->crystal; + break; + case 38400: + param_new = 8 + s->crystal; + break; + case 57600: + param_new = 1 + s->crystal; + break; + case 115200: + param_new = 0 + s->crystal; + break; + case 230400: + if (s->crystal) + param_new = 0; + else + baud = s->baud; + break; + default: + baud = s->baud; + } + tty_termios_encode_baud_rate(termios, baud, baud); + s->baud = baud; + param_mask |= MAX3100_BAUD; + + if ((cflag & CSIZE) == CS8) { + param_new &= ~MAX3100_L; + parity &= ~MAX3100_7BIT; + } else { + param_new |= MAX3100_L; + parity |= MAX3100_7BIT; + cflag = (cflag & ~CSIZE) | CS7; + } + param_mask |= MAX3100_L; + + if (cflag & CSTOPB) + param_new |= MAX3100_ST; + else + param_new &= ~MAX3100_ST; + param_mask |= MAX3100_ST; + + if (cflag & PARENB) { + param_new |= MAX3100_PE; + parity |= MAX3100_PARITY_ON; + } else { + param_new &= ~MAX3100_PE; + parity &= ~MAX3100_PARITY_ON; + } + param_mask |= MAX3100_PE; + + if (cflag & PARODD) + parity |= MAX3100_PARITY_ODD; + else + parity &= ~MAX3100_PARITY_ODD; + + /* mask termios capabilities we don't support */ + cflag &= ~CMSPAR; + termios->c_cflag = cflag; + + s->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + s->port.ignore_status_mask |= + MAX3100_STATUS_PE | MAX3100_STATUS_FE | + MAX3100_STATUS_OE; + + /* we are sending char from a workqueue so enable */ + s->port.state->port.tty->low_latency = 1; + + if (s->poll_time > 0) + del_timer_sync(&s->timer); + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_lock(&s->conf_lock); + s->conf = (s->conf & ~param_mask) | (param_new & param_mask); + s->conf_commit = 1; + s->parity = parity; + spin_unlock(&s->conf_lock); + max3100_dowork(s); + + if (UART_ENABLE_MS(&s->port, termios->c_cflag)) + max3100_enable_ms(&s->port); +} + +static void max3100_shutdown(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (s->suspending) + return; + + s->force_end_work = 1; + + if (s->poll_time > 0) + del_timer_sync(&s->timer); + + if (s->workqueue) { + flush_workqueue(s->workqueue); + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + } + if (s->irq) + free_irq(s->irq, s); + + /* set shutdown mode to save power */ + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(1); + else { + u16 tx, rx; + + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(s, tx, &rx); + } +} + +static int max3100_startup(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + char b[12]; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + s->conf = MAX3100_RM; + s->baud = s->crystal ? 230400 : 115200; + s->rx_enabled = 1; + + if (s->suspending) + return 0; + + s->force_end_work = 0; + s->parity = 0; + s->rts = 0; + + sprintf(b, "max3100-%d", s->minor); + s->workqueue = create_freezeable_workqueue(b); + if (!s->workqueue) { + dev_warn(&s->spi->dev, "cannot create workqueue\n"); + return -EBUSY; + } + INIT_WORK(&s->work, max3100_work); + + if (request_irq(s->irq, max3100_irq, + IRQF_TRIGGER_FALLING, "max3100", s) < 0) { + dev_warn(&s->spi->dev, "cannot allocate irq %d\n", s->irq); + s->irq = 0; + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + return -EBUSY; + } + + if (s->loopback) { + u16 tx, rx; + tx = 0x4001; + max3100_sr(s, tx, &rx); + } + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(0); + s->conf_commit = 1; + max3100_dowork(s); + /* wait for clock to settle */ + msleep(50); + + max3100_enable_ms(&s->port); + + return 0; +} + +static const char *max3100_type(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + return s->port.type == PORT_MAX3100 ? "MAX3100" : NULL; +} + +static void max3100_release_port(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static void max3100_config_port(struct uart_port *port, int flags) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (flags & UART_CONFIG_TYPE) + s->port.type = PORT_MAX3100; +} + +static int max3100_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int ret = -EINVAL; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100) + ret = 0; + return ret; +} + +static void max3100_stop_tx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static int max3100_request_port(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + return 0; +} + +static void max3100_break_ctl(struct uart_port *port, int break_state) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static struct uart_ops max3100_ops = { + .tx_empty = max3100_tx_empty, + .set_mctrl = max3100_set_mctrl, + .get_mctrl = max3100_get_mctrl, + .stop_tx = max3100_stop_tx, + .start_tx = max3100_start_tx, + .stop_rx = max3100_stop_rx, + .enable_ms = max3100_enable_ms, + .break_ctl = max3100_break_ctl, + .startup = max3100_startup, + .shutdown = max3100_shutdown, + .set_termios = max3100_set_termios, + .type = max3100_type, + .release_port = max3100_release_port, + .request_port = max3100_request_port, + .config_port = max3100_config_port, + .verify_port = max3100_verify_port, +}; + +static struct uart_driver max3100_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyMAX", + .dev_name = "ttyMAX", + .major = MAX3100_MAJOR, + .minor = MAX3100_MINOR, + .nr = MAX_MAX3100, +}; +static int uart_driver_registered; + +static int __devinit max3100_probe(struct spi_device *spi) +{ + int i, retval; + struct plat_max3100 *pdata; + u16 tx, rx; + + mutex_lock(&max3100s_lock); + + if (!uart_driver_registered) { + uart_driver_registered = 1; + retval = uart_register_driver(&max3100_uart_driver); + if (retval) { + printk(KERN_ERR "Couldn't register max3100 uart driver\n"); + mutex_unlock(&max3100s_lock); + return retval; + } + } + + for (i = 0; i < MAX_MAX3100; i++) + if (!max3100s[i]) + break; + if (i == MAX_MAX3100) { + dev_warn(&spi->dev, "too many MAX3100 chips\n"); + mutex_unlock(&max3100s_lock); + return -ENOMEM; + } + + max3100s[i] = kzalloc(sizeof(struct max3100_port), GFP_KERNEL); + if (!max3100s[i]) { + dev_warn(&spi->dev, + "kmalloc for max3100 structure %d failed!\n", i); + mutex_unlock(&max3100s_lock); + return -ENOMEM; + } + max3100s[i]->spi = spi; + max3100s[i]->irq = spi->irq; + spin_lock_init(&max3100s[i]->conf_lock); + dev_set_drvdata(&spi->dev, max3100s[i]); + pdata = spi->dev.platform_data; + max3100s[i]->crystal = pdata->crystal; + max3100s[i]->loopback = pdata->loopback; + max3100s[i]->poll_time = pdata->poll_time * HZ / 1000; + if (pdata->poll_time > 0 && max3100s[i]->poll_time == 0) + max3100s[i]->poll_time = 1; + max3100s[i]->max3100_hw_suspend = pdata->max3100_hw_suspend; + max3100s[i]->minor = i; + init_timer(&max3100s[i]->timer); + max3100s[i]->timer.function = max3100_timeout; + max3100s[i]->timer.data = (unsigned long) max3100s[i]; + + dev_dbg(&spi->dev, "%s: adding port %d\n", __func__, i); + max3100s[i]->port.irq = max3100s[i]->irq; + max3100s[i]->port.uartclk = max3100s[i]->crystal ? 3686400 : 1843200; + max3100s[i]->port.fifosize = 16; + max3100s[i]->port.ops = &max3100_ops; + max3100s[i]->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + max3100s[i]->port.line = i; + max3100s[i]->port.type = PORT_MAX3100; + max3100s[i]->port.dev = &spi->dev; + retval = uart_add_one_port(&max3100_uart_driver, &max3100s[i]->port); + if (retval < 0) + dev_warn(&spi->dev, + "uart_add_one_port failed for line %d with error %d\n", + i, retval); + + /* set shutdown mode to save power. Will be woken-up on open */ + if (max3100s[i]->max3100_hw_suspend) + max3100s[i]->max3100_hw_suspend(1); + else { + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(max3100s[i], tx, &rx); + } + mutex_unlock(&max3100s_lock); + return 0; +} + +static int __devexit max3100_remove(struct spi_device *spi) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + int i; + + mutex_lock(&max3100s_lock); + + /* find out the index for the chip we are removing */ + for (i = 0; i < MAX_MAX3100; i++) + if (max3100s[i] == s) + break; + + dev_dbg(&spi->dev, "%s: removing port %d\n", __func__, i); + uart_remove_one_port(&max3100_uart_driver, &max3100s[i]->port); + kfree(max3100s[i]); + max3100s[i] = NULL; + + /* check if this is the last chip we have */ + for (i = 0; i < MAX_MAX3100; i++) + if (max3100s[i]) { + mutex_unlock(&max3100s_lock); + return 0; + } + pr_debug("removing max3100 driver\n"); + uart_unregister_driver(&max3100_uart_driver); + + mutex_unlock(&max3100s_lock); + return 0; +} + +#ifdef CONFIG_PM + +static int max3100_suspend(struct spi_device *spi, pm_message_t state) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + disable_irq(s->irq); + + s->suspending = 1; + uart_suspend_port(&max3100_uart_driver, &s->port); + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(1); + else { + /* no HW suspend, so do SW one */ + u16 tx, rx; + + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(s, tx, &rx); + } + return 0; +} + +static int max3100_resume(struct spi_device *spi) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(0); + uart_resume_port(&max3100_uart_driver, &s->port); + s->suspending = 0; + + enable_irq(s->irq); + + s->conf_commit = 1; + if (s->workqueue) + max3100_dowork(s); + + return 0; +} + +#else +#define max3100_suspend NULL +#define max3100_resume NULL +#endif + +static struct spi_driver max3100_driver = { + .driver = { + .name = "max3100", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + + .probe = max3100_probe, + .remove = __devexit_p(max3100_remove), + .suspend = max3100_suspend, + .resume = max3100_resume, +}; + +static int __init max3100_init(void) +{ + return spi_register_driver(&max3100_driver); +} +module_init(max3100_init); + +static void __exit max3100_exit(void) +{ + spi_unregister_driver(&max3100_driver); +} +module_exit(max3100_exit); + +MODULE_DESCRIPTION("MAX3100 driver"); +MODULE_AUTHOR("Christian Pellegrin "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:max3100"); diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c new file mode 100644 index 000000000000..a1fe304f2f52 --- /dev/null +++ b/drivers/tty/serial/max3107-aava.c @@ -0,0 +1,344 @@ +/* + * max3107.c - spi uart protocol driver for Maxim 3107 + * Based on max3100.c + * by Christian Pellegrin + * and max3110.c + * by Feng Tang + * + * Copyright (C) Aavamobile 2009 + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "max3107.h" + +/* GPIO direction to input function */ +static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[1]; /* Buffer for SPI transfer */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO configuration register */ + buf[0] = MAX3107_GPIOCFG_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + + /* Set GPIO to input */ + buf[0] &= ~(0x0001 << offset); + + /* Write new GPIO configuration register value */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n"); + return -EIO; + } + return 0; +} + +/* GPIO direction to output function */ +static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[2]; /* Buffer for SPI transfers */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO configuration and data registers */ + buf[0] = MAX3107_GPIOCFG_REG; + buf[1] = MAX3107_GPIODATA_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { + dev_err(&s->spi->dev, "SPI transfer gpio failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + buf[1] &= MAX3107_SPI_RX_DATA_MASK; + + /* Set GPIO to output */ + buf[0] |= (0x0001 << offset); + /* Set value */ + if (value) + buf[1] |= (0x0001 << offset); + else + buf[1] &= ~(0x0001 << offset); + + /* Write new GPIO configuration and data register values */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); + buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 4)) { + dev_err(&s->spi->dev, + "SPI transfer for GPIO conf data w failed\n"); + return -EIO; + } + return 0; +} + +/* GPIO value query function */ +static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[1]; /* Buffer for SPI transfer */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO data register */ + buf[0] = MAX3107_GPIODATA_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + + /* Return value */ + return buf[0] & (0x0001 << offset); +} + +/* GPIO value set function */ +static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[2]; /* Buffer for SPI transfers */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return; + } + + /* Read current GPIO configuration registers*/ + buf[0] = MAX3107_GPIODATA_REG; + buf[1] = MAX3107_GPIOCFG_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { + dev_err(&s->spi->dev, + "SPI transfer for GPIO data and config read failed\n"); + return; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + buf[1] &= MAX3107_SPI_RX_DATA_MASK; + + if (!(buf[1] & (0x0001 << offset))) { + /* Configured as input, can't set value */ + dev_warn(&s->spi->dev, + "Trying to set value for input GPIO\n"); + return; + } + + /* Set value */ + if (value) + buf[0] |= (0x0001 << offset); + else + buf[0] &= ~(0x0001 << offset); + + /* Write new GPIO data register value */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n"); +} + +/* GPIO chip data */ +static struct gpio_chip max3107_gpio_chip = { + .owner = THIS_MODULE, + .direction_input = max3107_gpio_direction_in, + .direction_output = max3107_gpio_direction_out, + .get = max3107_gpio_get, + .set = max3107_gpio_set, + .can_sleep = 1, + .base = MAX3107_GPIO_BASE, + .ngpio = MAX3107_GPIO_COUNT, +}; + +/** + * max3107_aava_reset - reset on AAVA systems + * @spi: The SPI device we are probing + * + * Reset the device ready for probing. + */ + +static int max3107_aava_reset(struct spi_device *spi) +{ + /* Reset the chip */ + if (gpio_request(MAX3107_RESET_GPIO, "max3107")) { + pr_err("Requesting RESET GPIO failed\n"); + return -EIO; + } + if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) { + pr_err("Setting RESET GPIO to 0 failed\n"); + gpio_free(MAX3107_RESET_GPIO); + return -EIO; + } + msleep(MAX3107_RESET_DELAY); + if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) { + pr_err("Setting RESET GPIO to 1 failed\n"); + gpio_free(MAX3107_RESET_GPIO); + return -EIO; + } + gpio_free(MAX3107_RESET_GPIO); + msleep(MAX3107_WAKEUP_DELAY); + return 0; +} + +static int max3107_aava_configure(struct max3107_port *s) +{ + int retval; + + /* Initialize GPIO chip data */ + s->chip = max3107_gpio_chip; + s->chip.label = s->spi->modalias; + s->chip.dev = &s->spi->dev; + + /* Add GPIO chip */ + retval = gpiochip_add(&s->chip); + if (retval) { + dev_err(&s->spi->dev, "Adding GPIO chip failed\n"); + return retval; + } + + /* Temporary fix for EV2 boot problems, set modem reset to 0 */ + max3107_gpio_direction_out(&s->chip, 3, 0); + return 0; +} + +#if 0 +/* This will get enabled once we have the board stuff merged for this + specific case */ + +static const struct baud_table brg13_ext[] = { + { 300, MAX3107_BRG13_B300 }, + { 600, MAX3107_BRG13_B600 }, + { 1200, MAX3107_BRG13_B1200 }, + { 2400, MAX3107_BRG13_B2400 }, + { 4800, MAX3107_BRG13_B4800 }, + { 9600, MAX3107_BRG13_B9600 }, + { 19200, MAX3107_BRG13_B19200 }, + { 57600, MAX3107_BRG13_B57600 }, + { 115200, MAX3107_BRG13_B115200 }, + { 230400, MAX3107_BRG13_B230400 }, + { 460800, MAX3107_BRG13_B460800 }, + { 921600, MAX3107_BRG13_B921600 }, + { 0, 0 } +}; + +static void max3107_aava_init(struct max3107_port *s) +{ + /*override for AAVA SC specific*/ + if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) { + if (get_koski_build_id() <= KOSKI_EV2) + if (s->ext_clk) { + s->brg_cfg = MAX3107_BRG13_B9600; + s->baud_tbl = (struct baud_table *)brg13_ext; + } + } +} +#endif + +static int __devexit max3107_aava_remove(struct spi_device *spi) +{ + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + /* Remove GPIO chip */ + if (gpiochip_remove(&s->chip)) + dev_warn(&spi->dev, "Removing GPIO chip failed\n"); + + /* Then do the default remove */ + return max3107_remove(spi); +} + +/* Platform data */ +static struct max3107_plat aava_plat_data = { + .loopback = 0, + .ext_clk = 1, +/* .init = max3107_aava_init, */ + .configure = max3107_aava_configure, + .hw_suspend = max3107_hw_susp, + .polled_mode = 0, + .poll_time = 0, +}; + + +static int __devinit max3107_probe_aava(struct spi_device *spi) +{ + int err = max3107_aava_reset(spi); + if (err < 0) + return err; + return max3107_probe(spi, &aava_plat_data); +} + +/* Spi driver data */ +static struct spi_driver max3107_driver = { + .driver = { + .name = "aava-max3107", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = max3107_probe_aava, + .remove = __devexit_p(max3107_aava_remove), + .suspend = max3107_suspend, + .resume = max3107_resume, +}; + +/* Driver init function */ +static int __init max3107_init(void) +{ + return spi_register_driver(&max3107_driver); +} + +/* Driver exit function */ +static void __exit max3107_exit(void) +{ + spi_unregister_driver(&max3107_driver); +} + +module_init(max3107_init); +module_exit(max3107_exit); + +MODULE_DESCRIPTION("MAX3107 driver"); +MODULE_AUTHOR("Aavamobile"); +MODULE_ALIAS("aava-max3107-spi"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c new file mode 100644 index 000000000000..910870edf708 --- /dev/null +++ b/drivers/tty/serial/max3107.c @@ -0,0 +1,1213 @@ +/* + * max3107.c - spi uart protocol driver for Maxim 3107 + * Based on max3100.c + * by Christian Pellegrin + * and max3110.c + * by Feng Tang + * + * Copyright (C) Aavamobile 2009 + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include "max3107.h" + +static const struct baud_table brg26_ext[] = { + { 300, MAX3107_BRG26_B300 }, + { 600, MAX3107_BRG26_B600 }, + { 1200, MAX3107_BRG26_B1200 }, + { 2400, MAX3107_BRG26_B2400 }, + { 4800, MAX3107_BRG26_B4800 }, + { 9600, MAX3107_BRG26_B9600 }, + { 19200, MAX3107_BRG26_B19200 }, + { 57600, MAX3107_BRG26_B57600 }, + { 115200, MAX3107_BRG26_B115200 }, + { 230400, MAX3107_BRG26_B230400 }, + { 460800, MAX3107_BRG26_B460800 }, + { 921600, MAX3107_BRG26_B921600 }, + { 0, 0 } +}; + +static const struct baud_table brg13_int[] = { + { 300, MAX3107_BRG13_IB300 }, + { 600, MAX3107_BRG13_IB600 }, + { 1200, MAX3107_BRG13_IB1200 }, + { 2400, MAX3107_BRG13_IB2400 }, + { 4800, MAX3107_BRG13_IB4800 }, + { 9600, MAX3107_BRG13_IB9600 }, + { 19200, MAX3107_BRG13_IB19200 }, + { 57600, MAX3107_BRG13_IB57600 }, + { 115200, MAX3107_BRG13_IB115200 }, + { 230400, MAX3107_BRG13_IB230400 }, + { 460800, MAX3107_BRG13_IB460800 }, + { 921600, MAX3107_BRG13_IB921600 }, + { 0, 0 } +}; + +static u32 get_new_brg(int baud, struct max3107_port *s) +{ + int i; + const struct baud_table *baud_tbl = s->baud_tbl; + + for (i = 0; i < 13; i++) { + if (baud == baud_tbl[i].baud) + return baud_tbl[i].new_brg; + } + + return 0; +} + +/* Perform SPI transfer for write/read of device register(s) */ +int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len) +{ + struct spi_message spi_msg; + struct spi_transfer spi_xfer; + + /* Initialize SPI ,message */ + spi_message_init(&spi_msg); + + /* Initialize SPI transfer */ + memset(&spi_xfer, 0, sizeof spi_xfer); + spi_xfer.len = len; + spi_xfer.tx_buf = tx; + spi_xfer.rx_buf = rx; + spi_xfer.speed_hz = MAX3107_SPI_SPEED; + + /* Add SPI transfer to SPI message */ + spi_message_add_tail(&spi_xfer, &spi_msg); + +#ifdef DBG_TRACE_SPI_DATA + { + int i; + pr_info("tx len %d:\n", spi_xfer.len); + for (i = 0 ; i < spi_xfer.len && i < 32 ; i++) + pr_info(" %x", ((u8 *)spi_xfer.tx_buf)[i]); + pr_info("\n"); + } +#endif + + /* Perform synchronous SPI transfer */ + if (spi_sync(s->spi, &spi_msg)) { + dev_err(&s->spi->dev, "spi_sync failure\n"); + return -EIO; + } + +#ifdef DBG_TRACE_SPI_DATA + if (spi_xfer.rx_buf) { + int i; + pr_info("rx len %d:\n", spi_xfer.len); + for (i = 0 ; i < spi_xfer.len && i < 32 ; i++) + pr_info(" %x", ((u8 *)spi_xfer.rx_buf)[i]); + pr_info("\n"); + } +#endif + return 0; +} +EXPORT_SYMBOL_GPL(max3107_rw); + +/* Puts received data to circular buffer */ +static void put_data_to_circ_buf(struct max3107_port *s, unsigned char *data, + int len) +{ + struct uart_port *port = &s->port; + struct tty_struct *tty; + + if (!port->state) + return; + + tty = port->state->port.tty; + if (!tty) + return; + + /* Insert received data */ + tty_insert_flip_string(tty, data, len); + /* Update RX counter */ + port->icount.rx += len; +} + +/* Handle data receiving */ +static void max3107_handlerx(struct max3107_port *s, u16 rxlvl) +{ + int i; + int j; + int len; /* SPI transfer buffer length */ + u16 *buf; + u8 *valid_str; + + if (!s->rx_enabled) + /* RX is disabled */ + return; + + if (rxlvl == 0) { + /* RX fifo is empty */ + return; + } else if (rxlvl >= MAX3107_RX_FIFO_SIZE) { + dev_warn(&s->spi->dev, "Possible RX FIFO overrun %d\n", rxlvl); + /* Ensure sanity of RX level */ + rxlvl = MAX3107_RX_FIFO_SIZE; + } + if ((s->rxbuf == 0) || (s->rxstr == 0)) { + dev_warn(&s->spi->dev, "Rx buffer/str isn't ready\n"); + return; + } + buf = s->rxbuf; + valid_str = s->rxstr; + while (rxlvl) { + pr_debug("rxlvl %d\n", rxlvl); + /* Clear buffer */ + memset(buf, 0, sizeof(u16) * (MAX3107_RX_FIFO_SIZE + 2)); + len = 0; + if (s->irqen_reg & MAX3107_IRQ_RXFIFO_BIT) { + /* First disable RX FIFO interrupt */ + pr_debug("Disabling RX INT\n"); + buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); + s->irqen_reg &= ~MAX3107_IRQ_RXFIFO_BIT; + buf[0] |= s->irqen_reg; + len++; + } + /* Just increase the length by amount of words in FIFO since + * buffer was zeroed and SPI transfer of 0x0000 means reading + * from RX FIFO + */ + len += rxlvl; + /* Append RX level query */ + buf[len] = MAX3107_RXFIFOLVL_REG; + len++; + + /* Perform the SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, len * 2)) { + dev_err(&s->spi->dev, "SPI transfer for RX h failed\n"); + return; + } + + /* Skip RX FIFO interrupt disabling word if it was added */ + j = ((len - 1) - rxlvl); + /* Read received words */ + for (i = 0; i < rxlvl; i++, j++) + valid_str[i] = (u8)buf[j]; + put_data_to_circ_buf(s, valid_str, rxlvl); + /* Get new RX level */ + rxlvl = (buf[len - 1] & MAX3107_SPI_RX_DATA_MASK); + } + + if (s->rx_enabled) { + /* RX still enabled, re-enable RX FIFO interrupt */ + pr_debug("Enabling RX INT\n"); + buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); + s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT; + buf[0] |= s->irqen_reg; + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "RX FIFO INT enabling failed\n"); + } + + /* Push the received data to receivers */ + if (s->port.state->port.tty) + tty_flip_buffer_push(s->port.state->port.tty); +} + + +/* Handle data sending */ +static void max3107_handletx(struct max3107_port *s) +{ + struct circ_buf *xmit = &s->port.state->xmit; + int i; + unsigned long flags; + int len; /* SPI transfer buffer length */ + u16 *buf; + + if (!s->tx_fifo_empty) + /* Don't send more data before previous data is sent */ + return; + + if (uart_circ_empty(xmit) || uart_tx_stopped(&s->port)) + /* No data to send or TX is stopped */ + return; + + if (!s->txbuf) { + dev_warn(&s->spi->dev, "Txbuf isn't ready\n"); + return; + } + buf = s->txbuf; + /* Get length of data pending in circular buffer */ + len = uart_circ_chars_pending(xmit); + if (len) { + /* Limit to size of TX FIFO */ + if (len > MAX3107_TX_FIFO_SIZE) + len = MAX3107_TX_FIFO_SIZE; + + pr_debug("txlen %d\n", len); + + /* Update TX counter */ + s->port.icount.tx += len; + + /* TX FIFO will no longer be empty */ + s->tx_fifo_empty = 0; + + i = 0; + if (s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT) { + /* First disable TX empty interrupt */ + pr_debug("Disabling TE INT\n"); + buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); + s->irqen_reg &= ~MAX3107_IRQ_TXEMPTY_BIT; + buf[i] |= s->irqen_reg; + i++; + len++; + } + /* Add data to send */ + spin_lock_irqsave(&s->port.lock, flags); + for ( ; i < len ; i++) { + buf[i] = (MAX3107_WRITE_BIT | MAX3107_THR_REG); + buf[i] |= ((u16)xmit->buf[xmit->tail] & + MAX3107_SPI_TX_DATA_MASK); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } + spin_unlock_irqrestore(&s->port.lock, flags); + if (!(s->irqen_reg & MAX3107_IRQ_TXEMPTY_BIT)) { + /* Enable TX empty interrupt */ + pr_debug("Enabling TE INT\n"); + buf[i] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG); + s->irqen_reg |= MAX3107_IRQ_TXEMPTY_BIT; + buf[i] |= s->irqen_reg; + i++; + len++; + } + if (!s->tx_enabled) { + /* Enable TX */ + pr_debug("Enable TX\n"); + buf[i] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); + spin_lock_irqsave(&s->data_lock, flags); + s->mode1_reg &= ~MAX3107_MODE1_TXDIS_BIT; + buf[i] |= s->mode1_reg; + spin_unlock_irqrestore(&s->data_lock, flags); + s->tx_enabled = 1; + i++; + len++; + } + + /* Perform the SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, len*2)) { + dev_err(&s->spi->dev, + "SPI transfer TX handling failed\n"); + return; + } + } + + /* Indicate wake up if circular buffer is getting low on data */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); + +} + +/* Handle interrupts + * Also reads and returns current RX FIFO level + */ +static u16 handle_interrupt(struct max3107_port *s) +{ + u16 buf[4]; /* Buffer for SPI transfers */ + u8 irq_status; + u16 rx_level; + unsigned long flags; + + /* Read IRQ status register */ + buf[0] = MAX3107_IRQSTS_REG; + /* Read status IRQ status register */ + buf[1] = MAX3107_STS_IRQSTS_REG; + /* Read LSR IRQ status register */ + buf[2] = MAX3107_LSR_IRQSTS_REG; + /* Query RX level */ + buf[3] = MAX3107_RXFIFOLVL_REG; + + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 8)) { + dev_err(&s->spi->dev, + "SPI transfer for INTR handling failed\n"); + return 0; + } + + irq_status = (u8)buf[0]; + pr_debug("IRQSTS %x\n", irq_status); + rx_level = (buf[3] & MAX3107_SPI_RX_DATA_MASK); + + if (irq_status & MAX3107_IRQ_LSR_BIT) { + /* LSR interrupt */ + if (buf[2] & MAX3107_LSR_RXTO_BIT) + /* RX timeout interrupt, + * handled by normal RX handling + */ + pr_debug("RX TO INT\n"); + } + + if (irq_status & MAX3107_IRQ_TXEMPTY_BIT) { + /* Tx empty interrupt, + * disable TX and set tx_fifo_empty flag + */ + pr_debug("TE INT, disabling TX\n"); + buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); + spin_lock_irqsave(&s->data_lock, flags); + s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT; + buf[0] |= s->mode1_reg; + spin_unlock_irqrestore(&s->data_lock, flags); + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "SPI transfer TX dis failed\n"); + s->tx_enabled = 0; + s->tx_fifo_empty = 1; + } + + if (irq_status & MAX3107_IRQ_RXFIFO_BIT) + /* RX FIFO interrupt, + * handled by normal RX handling + */ + pr_debug("RFIFO INT\n"); + + /* Return RX level */ + return rx_level; +} + +/* Trigger work thread*/ +static void max3107_dowork(struct max3107_port *s) +{ + if (!work_pending(&s->work) && !freezing(current) && !s->suspended) + queue_work(s->workqueue, &s->work); + else + dev_warn(&s->spi->dev, "interrup isn't serviced normally!\n"); +} + +/* Work thread */ +static void max3107_work(struct work_struct *w) +{ + struct max3107_port *s = container_of(w, struct max3107_port, work); + u16 rxlvl = 0; + int len; /* SPI transfer buffer length */ + u16 buf[5]; /* Buffer for SPI transfers */ + unsigned long flags; + + /* Start by reading current RX FIFO level */ + buf[0] = MAX3107_RXFIFOLVL_REG; + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer RX lev failed\n"); + rxlvl = 0; + } else { + rxlvl = (buf[0] & MAX3107_SPI_RX_DATA_MASK); + } + + do { + pr_debug("rxlvl %d\n", rxlvl); + + /* Handle RX */ + max3107_handlerx(s, rxlvl); + rxlvl = 0; + + if (s->handle_irq) { + /* Handle pending interrupts + * We also get new RX FIFO level since new data may + * have been received while pushing received data to + * receivers + */ + s->handle_irq = 0; + rxlvl = handle_interrupt(s); + } + + /* Handle TX */ + max3107_handletx(s); + + /* Handle configuration changes */ + len = 0; + spin_lock_irqsave(&s->data_lock, flags); + if (s->mode1_commit) { + pr_debug("mode1_commit\n"); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); + buf[len++] |= s->mode1_reg; + s->mode1_commit = 0; + } + if (s->lcr_commit) { + pr_debug("lcr_commit\n"); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG); + buf[len++] |= s->lcr_reg; + s->lcr_commit = 0; + } + if (s->brg_commit) { + pr_debug("brg_commit\n"); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG); + buf[len++] |= ((s->brg_cfg >> 16) & + MAX3107_SPI_TX_DATA_MASK); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG); + buf[len++] |= ((s->brg_cfg >> 8) & + MAX3107_SPI_TX_DATA_MASK); + buf[len] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG); + buf[len++] |= ((s->brg_cfg) & 0xff); + s->brg_commit = 0; + } + spin_unlock_irqrestore(&s->data_lock, flags); + + if (len > 0) { + if (max3107_rw(s, (u8 *)buf, NULL, len * 2)) + dev_err(&s->spi->dev, + "SPI transfer config failed\n"); + } + + /* Reloop if interrupt handling indicated data in RX FIFO */ + } while (rxlvl); + +} + +/* Set sleep mode */ +static void max3107_set_sleep(struct max3107_port *s, int mode) +{ + u16 buf[1]; /* Buffer for SPI transfer */ + unsigned long flags; + pr_debug("enter, mode %d\n", mode); + + buf[0] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG); + spin_lock_irqsave(&s->data_lock, flags); + switch (mode) { + case MAX3107_DISABLE_FORCED_SLEEP: + s->mode1_reg &= ~MAX3107_MODE1_FORCESLEEP_BIT; + break; + case MAX3107_ENABLE_FORCED_SLEEP: + s->mode1_reg |= MAX3107_MODE1_FORCESLEEP_BIT; + break; + case MAX3107_DISABLE_AUTOSLEEP: + s->mode1_reg &= ~MAX3107_MODE1_AUTOSLEEP_BIT; + break; + case MAX3107_ENABLE_AUTOSLEEP: + s->mode1_reg |= MAX3107_MODE1_AUTOSLEEP_BIT; + break; + default: + spin_unlock_irqrestore(&s->data_lock, flags); + dev_warn(&s->spi->dev, "invalid sleep mode\n"); + return; + } + buf[0] |= s->mode1_reg; + spin_unlock_irqrestore(&s->data_lock, flags); + + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "SPI transfer sleep mode failed\n"); + + if (mode == MAX3107_DISABLE_AUTOSLEEP || + mode == MAX3107_DISABLE_FORCED_SLEEP) + msleep(MAX3107_WAKEUP_DELAY); +} + +/* Perform full register initialization */ +static void max3107_register_init(struct max3107_port *s) +{ + u16 buf[11]; /* Buffer for SPI transfers */ + + /* 1. Configure baud rate, 9600 as default */ + s->baud = 9600; + /* the below is default*/ + if (s->ext_clk) { + s->brg_cfg = MAX3107_BRG26_B9600; + s->baud_tbl = (struct baud_table *)brg26_ext; + } else { + s->brg_cfg = MAX3107_BRG13_IB9600; + s->baud_tbl = (struct baud_table *)brg13_int; + } + + if (s->pdata->init) + s->pdata->init(s); + + buf[0] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG) + | ((s->brg_cfg >> 16) & MAX3107_SPI_TX_DATA_MASK); + buf[1] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG) + | ((s->brg_cfg >> 8) & MAX3107_SPI_TX_DATA_MASK); + buf[2] = (MAX3107_WRITE_BIT | MAX3107_BRGCFG_REG) + | ((s->brg_cfg) & 0xff); + + /* 2. Configure LCR register, 8N1 mode by default */ + s->lcr_reg = MAX3107_LCR_WORD_LEN_8; + buf[3] = (MAX3107_WRITE_BIT | MAX3107_LCR_REG) + | s->lcr_reg; + + /* 3. Configure MODE 1 register */ + s->mode1_reg = 0; + /* Enable IRQ pin */ + s->mode1_reg |= MAX3107_MODE1_IRQSEL_BIT; + /* Disable TX */ + s->mode1_reg |= MAX3107_MODE1_TXDIS_BIT; + s->tx_enabled = 0; + /* RX is enabled */ + s->rx_enabled = 1; + buf[4] = (MAX3107_WRITE_BIT | MAX3107_MODE1_REG) + | s->mode1_reg; + + /* 4. Configure MODE 2 register */ + buf[5] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG); + if (s->loopback) { + /* Enable loopback */ + buf[5] |= MAX3107_MODE2_LOOPBACK_BIT; + } + /* Reset FIFOs */ + buf[5] |= MAX3107_MODE2_FIFORST_BIT; + s->tx_fifo_empty = 1; + + /* 5. Configure FIFO trigger level register */ + buf[6] = (MAX3107_WRITE_BIT | MAX3107_FIFOTRIGLVL_REG); + /* RX FIFO trigger for 16 words, TX FIFO trigger not used */ + buf[6] |= (MAX3107_FIFOTRIGLVL_RX(16) | MAX3107_FIFOTRIGLVL_TX(0)); + + /* 6. Configure flow control levels */ + buf[7] = (MAX3107_WRITE_BIT | MAX3107_FLOWLVL_REG); + /* Flow control halt level 96, resume level 48 */ + buf[7] |= (MAX3107_FLOWLVL_RES(48) | MAX3107_FLOWLVL_HALT(96)); + + /* 7. Configure flow control */ + buf[8] = (MAX3107_WRITE_BIT | MAX3107_FLOWCTRL_REG); + /* Enable auto CTS and auto RTS flow control */ + buf[8] |= (MAX3107_FLOWCTRL_AUTOCTS_BIT | MAX3107_FLOWCTRL_AUTORTS_BIT); + + /* 8. Configure RX timeout register */ + buf[9] = (MAX3107_WRITE_BIT | MAX3107_RXTO_REG); + /* Timeout after 48 character intervals */ + buf[9] |= 0x0030; + + /* 9. Configure LSR interrupt enable register */ + buf[10] = (MAX3107_WRITE_BIT | MAX3107_LSR_IRQEN_REG); + /* Enable RX timeout interrupt */ + buf[10] |= MAX3107_LSR_RXTO_BIT; + + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 22)) + dev_err(&s->spi->dev, "SPI transfer for init failed\n"); + + /* 10. Clear IRQ status register by reading it */ + buf[0] = MAX3107_IRQSTS_REG; + + /* 11. Configure interrupt enable register */ + /* Enable LSR interrupt */ + s->irqen_reg = MAX3107_IRQ_LSR_BIT; + /* Enable RX FIFO interrupt */ + s->irqen_reg |= MAX3107_IRQ_RXFIFO_BIT; + buf[1] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG) + | s->irqen_reg; + + /* 12. Clear FIFO reset that was set in step 6 */ + buf[2] = (MAX3107_WRITE_BIT | MAX3107_MODE2_REG); + if (s->loopback) { + /* Keep loopback enabled */ + buf[2] |= MAX3107_MODE2_LOOPBACK_BIT; + } + + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 6)) + dev_err(&s->spi->dev, "SPI transfer for init failed\n"); + +} + +/* IRQ handler */ +static irqreturn_t max3107_irq(int irqno, void *dev_id) +{ + struct max3107_port *s = dev_id; + + if (irqno != s->spi->irq) { + /* Unexpected IRQ */ + return IRQ_NONE; + } + + /* Indicate irq */ + s->handle_irq = 1; + + /* Trigger work thread */ + max3107_dowork(s); + + return IRQ_HANDLED; +} + +/* HW suspension function + * + * Currently autosleep is used to decrease current consumption, alternative + * approach would be to set the chip to reset mode if UART is not being + * used but that would mess the GPIOs + * + */ +void max3107_hw_susp(struct max3107_port *s, int suspend) +{ + pr_debug("enter, suspend %d\n", suspend); + + if (suspend) { + /* Suspend requested, + * enable autosleep to decrease current consumption + */ + s->suspended = 1; + max3107_set_sleep(s, MAX3107_ENABLE_AUTOSLEEP); + } else { + /* Resume requested, + * disable autosleep + */ + s->suspended = 0; + max3107_set_sleep(s, MAX3107_DISABLE_AUTOSLEEP); + } +} +EXPORT_SYMBOL_GPL(max3107_hw_susp); + +/* Modem status IRQ enabling */ +static void max3107_enable_ms(struct uart_port *port) +{ + /* Modem status not supported */ +} + +/* Data send function */ +static void max3107_start_tx(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + /* Trigger work thread for sending data */ + max3107_dowork(s); +} + +/* Function for checking that there is no pending transfers */ +static unsigned int max3107_tx_empty(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + pr_debug("returning %d\n", + (s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit))); + return s->tx_fifo_empty && uart_circ_empty(&s->port.state->xmit); +} + +/* Function for stopping RX */ +static void max3107_stop_rx(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + unsigned long flags; + + /* Set RX disabled in MODE 1 register */ + spin_lock_irqsave(&s->data_lock, flags); + s->mode1_reg |= MAX3107_MODE1_RXDIS_BIT; + s->mode1_commit = 1; + spin_unlock_irqrestore(&s->data_lock, flags); + /* Set RX disabled */ + s->rx_enabled = 0; + /* Trigger work thread for doing the actual configuration change */ + max3107_dowork(s); +} + +/* Function for returning control pin states */ +static unsigned int max3107_get_mctrl(struct uart_port *port) +{ + /* DCD and DSR are not wired and CTS/RTS is handled automatically + * so just indicate DSR and CAR asserted + */ + return TIOCM_DSR | TIOCM_CAR; +} + +/* Function for setting control pin states */ +static void max3107_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* DCD and DSR are not wired and CTS/RTS is hadnled automatically + * so do nothing + */ +} + +/* Function for configuring UART parameters */ +static void max3107_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + struct tty_struct *tty; + int baud; + u16 new_lcr = 0; + u32 new_brg = 0; + unsigned long flags; + + if (!port->state) + return; + + tty = port->state->port.tty; + if (!tty) + return; + + /* Get new LCR register values */ + /* Word size */ + if ((termios->c_cflag & CSIZE) == CS7) + new_lcr |= MAX3107_LCR_WORD_LEN_7; + else + new_lcr |= MAX3107_LCR_WORD_LEN_8; + + /* Parity */ + if (termios->c_cflag & PARENB) { + new_lcr |= MAX3107_LCR_PARITY_BIT; + if (!(termios->c_cflag & PARODD)) + new_lcr |= MAX3107_LCR_EVENPARITY_BIT; + } + + /* Stop bits */ + if (termios->c_cflag & CSTOPB) { + /* 2 stop bits */ + new_lcr |= MAX3107_LCR_STOPLEN_BIT; + } + + /* Mask termios capabilities we don't support */ + termios->c_cflag &= ~CMSPAR; + + /* Set status ignore mask */ + s->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + s->port.ignore_status_mask |= MAX3107_ALL_ERRORS; + + /* Set low latency to immediately handle pushed data */ + s->port.state->port.tty->low_latency = 1; + + /* Get new baud rate generator configuration */ + baud = tty_get_baud_rate(tty); + + spin_lock_irqsave(&s->data_lock, flags); + new_brg = get_new_brg(baud, s); + /* if can't find the corrent config, use previous */ + if (!new_brg) { + baud = s->baud; + new_brg = s->brg_cfg; + } + spin_unlock_irqrestore(&s->data_lock, flags); + tty_termios_encode_baud_rate(termios, baud, baud); + s->baud = baud; + + /* Update timeout according to new baud rate */ + uart_update_timeout(port, termios->c_cflag, baud); + + spin_lock_irqsave(&s->data_lock, flags); + if (s->lcr_reg != new_lcr) { + s->lcr_reg = new_lcr; + s->lcr_commit = 1; + } + if (s->brg_cfg != new_brg) { + s->brg_cfg = new_brg; + s->brg_commit = 1; + } + spin_unlock_irqrestore(&s->data_lock, flags); + + /* Trigger work thread for doing the actual configuration change */ + max3107_dowork(s); +} + +/* Port shutdown function */ +static void max3107_shutdown(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + if (s->suspended && s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 0); + + /* Free the interrupt */ + free_irq(s->spi->irq, s); + + if (s->workqueue) { + /* Flush and destroy work queue */ + flush_workqueue(s->workqueue); + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + } + + /* Suspend HW */ + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 1); +} + +/* Port startup function */ +static int max3107_startup(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + + /* Initialize work queue */ + s->workqueue = create_freezeable_workqueue("max3107"); + if (!s->workqueue) { + dev_err(&s->spi->dev, "Workqueue creation failed\n"); + return -EBUSY; + } + INIT_WORK(&s->work, max3107_work); + + /* Setup IRQ */ + if (request_irq(s->spi->irq, max3107_irq, IRQF_TRIGGER_FALLING, + "max3107", s)) { + dev_err(&s->spi->dev, "IRQ reguest failed\n"); + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + return -EBUSY; + } + + /* Resume HW */ + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 0); + + /* Init registers */ + max3107_register_init(s); + + return 0; +} + +/* Port type function */ +static const char *max3107_type(struct uart_port *port) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + return s->spi->modalias; +} + +/* Port release function */ +static void max3107_release_port(struct uart_port *port) +{ + /* Do nothing */ +} + +/* Port request function */ +static int max3107_request_port(struct uart_port *port) +{ + /* Do nothing */ + return 0; +} + +/* Port config function */ +static void max3107_config_port(struct uart_port *port, int flags) +{ + struct max3107_port *s = container_of(port, struct max3107_port, port); + s->port.type = PORT_MAX3107; +} + +/* Port verify function */ +static int max3107_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3107) + return 0; + + return -EINVAL; +} + +/* Port stop TX function */ +static void max3107_stop_tx(struct uart_port *port) +{ + /* Do nothing */ +} + +/* Port break control function */ +static void max3107_break_ctl(struct uart_port *port, int break_state) +{ + /* We don't support break control, do nothing */ +} + + +/* Port functions */ +static struct uart_ops max3107_ops = { + .tx_empty = max3107_tx_empty, + .set_mctrl = max3107_set_mctrl, + .get_mctrl = max3107_get_mctrl, + .stop_tx = max3107_stop_tx, + .start_tx = max3107_start_tx, + .stop_rx = max3107_stop_rx, + .enable_ms = max3107_enable_ms, + .break_ctl = max3107_break_ctl, + .startup = max3107_startup, + .shutdown = max3107_shutdown, + .set_termios = max3107_set_termios, + .type = max3107_type, + .release_port = max3107_release_port, + .request_port = max3107_request_port, + .config_port = max3107_config_port, + .verify_port = max3107_verify_port, +}; + +/* UART driver data */ +static struct uart_driver max3107_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyMAX", + .dev_name = "ttyMAX", + .nr = 1, +}; + +static int driver_registered = 0; + + + +/* 'Generic' platform data */ +static struct max3107_plat generic_plat_data = { + .loopback = 0, + .ext_clk = 1, + .hw_suspend = max3107_hw_susp, + .polled_mode = 0, + .poll_time = 0, +}; + + +/*******************************************************************/ + +/** + * max3107_probe - SPI bus probe entry point + * @spi: the spi device + * + * SPI wants us to probe this device and if appropriate claim it. + * Perform any platform specific requirements and then initialise + * the device. + */ + +int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata) +{ + struct max3107_port *s; + u16 buf[2]; /* Buffer for SPI transfers */ + int retval; + + pr_info("enter max3107 probe\n"); + + /* Allocate port structure */ + s = kzalloc(sizeof(*s), GFP_KERNEL); + if (!s) { + pr_err("Allocating port structure failed\n"); + return -ENOMEM; + } + + s->pdata = pdata; + + /* SPI Rx buffer + * +2 for RX FIFO interrupt + * disabling and RX level query + */ + s->rxbuf = kzalloc(sizeof(u16) * (MAX3107_RX_FIFO_SIZE+2), GFP_KERNEL); + if (!s->rxbuf) { + pr_err("Allocating RX buffer failed\n"); + retval = -ENOMEM; + goto err_free4; + } + s->rxstr = kzalloc(sizeof(u8) * MAX3107_RX_FIFO_SIZE, GFP_KERNEL); + if (!s->rxstr) { + pr_err("Allocating RX buffer failed\n"); + retval = -ENOMEM; + goto err_free3; + } + /* SPI Tx buffer + * SPI transfer buffer + * +3 for TX FIFO empty + * interrupt disabling and + * enabling and TX enabling + */ + s->txbuf = kzalloc(sizeof(u16) * MAX3107_TX_FIFO_SIZE + 3, GFP_KERNEL); + if (!s->txbuf) { + pr_err("Allocating TX buffer failed\n"); + retval = -ENOMEM; + goto err_free2; + } + /* Initialize shared data lock */ + spin_lock_init(&s->data_lock); + + /* SPI intializations */ + dev_set_drvdata(&spi->dev, s); + spi->mode = SPI_MODE_0; + spi->dev.platform_data = pdata; + spi->bits_per_word = 16; + s->ext_clk = pdata->ext_clk; + s->loopback = pdata->loopback; + spi_setup(spi); + s->spi = spi; + + /* Check REV ID to ensure we are talking to what we expect */ + buf[0] = MAX3107_REVID_REG; + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer for REVID read failed\n"); + retval = -EIO; + goto err_free1; + } + if ((buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID1 && + (buf[0] & MAX3107_SPI_RX_DATA_MASK) != MAX3107_REVID2) { + dev_err(&s->spi->dev, "REVID %x does not match\n", + (buf[0] & MAX3107_SPI_RX_DATA_MASK)); + retval = -ENODEV; + goto err_free1; + } + + /* Disable all interrupts */ + buf[0] = (MAX3107_WRITE_BIT | MAX3107_IRQEN_REG | 0x0000); + buf[0] |= 0x0000; + + /* Configure clock source */ + buf[1] = (MAX3107_WRITE_BIT | MAX3107_CLKSRC_REG); + if (s->ext_clk) { + /* External clock */ + buf[1] |= MAX3107_CLKSRC_EXTCLK_BIT; + } + + /* PLL bypass ON */ + buf[1] |= MAX3107_CLKSRC_PLLBYP_BIT; + + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 4)) { + dev_err(&s->spi->dev, "SPI transfer for init failed\n"); + retval = -EIO; + goto err_free1; + } + + /* Register UART driver */ + if (!driver_registered) { + retval = uart_register_driver(&max3107_uart_driver); + if (retval) { + dev_err(&s->spi->dev, "Registering UART driver failed\n"); + goto err_free1; + } + driver_registered = 1; + } + + /* Initialize UART port data */ + s->port.fifosize = 128; + s->port.ops = &max3107_ops; + s->port.line = 0; + s->port.dev = &spi->dev; + s->port.uartclk = 9600; + s->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + s->port.irq = s->spi->irq; + s->port.type = PORT_MAX3107; + + /* Add UART port */ + retval = uart_add_one_port(&max3107_uart_driver, &s->port); + if (retval < 0) { + dev_err(&s->spi->dev, "Adding UART port failed\n"); + goto err_free1; + } + + if (pdata->configure) { + retval = pdata->configure(s); + if (retval < 0) + goto err_free1; + } + + /* Go to suspend mode */ + if (pdata->hw_suspend) + pdata->hw_suspend(s, 1); + + return 0; + +err_free1: + kfree(s->txbuf); +err_free2: + kfree(s->rxstr); +err_free3: + kfree(s->rxbuf); +err_free4: + kfree(s); + return retval; +} +EXPORT_SYMBOL_GPL(max3107_probe); + +/* Driver remove function */ +int max3107_remove(struct spi_device *spi) +{ + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + pr_info("enter max3107 remove\n"); + + /* Remove port */ + if (uart_remove_one_port(&max3107_uart_driver, &s->port)) + dev_warn(&s->spi->dev, "Removing UART port failed\n"); + + + /* Free TxRx buffer */ + kfree(s->rxbuf); + kfree(s->rxstr); + kfree(s->txbuf); + + /* Free port structure */ + kfree(s); + + return 0; +} +EXPORT_SYMBOL_GPL(max3107_remove); + +/* Driver suspend function */ +int max3107_suspend(struct spi_device *spi, pm_message_t state) +{ +#ifdef CONFIG_PM + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + pr_debug("enter suspend\n"); + + /* Suspend UART port */ + uart_suspend_port(&max3107_uart_driver, &s->port); + + /* Go to suspend mode */ + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 1); +#endif /* CONFIG_PM */ + return 0; +} +EXPORT_SYMBOL_GPL(max3107_suspend); + +/* Driver resume function */ +int max3107_resume(struct spi_device *spi) +{ +#ifdef CONFIG_PM + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + pr_debug("enter resume\n"); + + /* Resume from suspend */ + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 0); + + /* Resume UART port */ + uart_resume_port(&max3107_uart_driver, &s->port); +#endif /* CONFIG_PM */ + return 0; +} +EXPORT_SYMBOL_GPL(max3107_resume); + +static int max3107_probe_generic(struct spi_device *spi) +{ + return max3107_probe(spi, &generic_plat_data); +} + +/* Spi driver data */ +static struct spi_driver max3107_driver = { + .driver = { + .name = "max3107", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = max3107_probe_generic, + .remove = __devexit_p(max3107_remove), + .suspend = max3107_suspend, + .resume = max3107_resume, +}; + +/* Driver init function */ +static int __init max3107_init(void) +{ + pr_info("enter max3107 init\n"); + return spi_register_driver(&max3107_driver); +} + +/* Driver exit function */ +static void __exit max3107_exit(void) +{ + pr_info("enter max3107 exit\n"); + /* Unregister UART driver */ + if (driver_registered) + uart_unregister_driver(&max3107_uart_driver); + spi_unregister_driver(&max3107_driver); +} + +module_init(max3107_init); +module_exit(max3107_exit); + +MODULE_DESCRIPTION("MAX3107 driver"); +MODULE_AUTHOR("Aavamobile"); +MODULE_ALIAS("max3107-spi"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/max3107.h b/drivers/tty/serial/max3107.h new file mode 100644 index 000000000000..7ab632392502 --- /dev/null +++ b/drivers/tty/serial/max3107.h @@ -0,0 +1,441 @@ +/* + * max3107.h - spi uart protocol driver header for Maxim 3107 + * + * Copyright (C) Aavamobile 2009 + * Based on serial_max3100.h by Christian Pellegrin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _MAX3107_H +#define _MAX3107_H + +/* Serial error status definitions */ +#define MAX3107_PARITY_ERROR 1 +#define MAX3107_FRAME_ERROR 2 +#define MAX3107_OVERRUN_ERROR 4 +#define MAX3107_ALL_ERRORS (MAX3107_PARITY_ERROR | \ + MAX3107_FRAME_ERROR | \ + MAX3107_OVERRUN_ERROR) + +/* GPIO definitions */ +#define MAX3107_GPIO_BASE 88 +#define MAX3107_GPIO_COUNT 4 + + +/* GPIO connected to chip's reset pin */ +#define MAX3107_RESET_GPIO 87 + + +/* Chip reset delay */ +#define MAX3107_RESET_DELAY 10 + +/* Chip wakeup delay */ +#define MAX3107_WAKEUP_DELAY 50 + + +/* Sleep mode definitions */ +#define MAX3107_DISABLE_FORCED_SLEEP 0 +#define MAX3107_ENABLE_FORCED_SLEEP 1 +#define MAX3107_DISABLE_AUTOSLEEP 2 +#define MAX3107_ENABLE_AUTOSLEEP 3 + + +/* Definitions for register access with SPI transfers + * + * SPI transfer format: + * + * Master to slave bits xzzzzzzzyyyyyyyy + * Slave to master bits aaaaaaaabbbbbbbb + * + * where: + * x = 0 for reads, 1 for writes + * z = register address + * y = new register value if write, 0 if read + * a = unspecified + * b = register value if read, unspecified if write + */ + +/* SPI speed */ +#define MAX3107_SPI_SPEED (3125000 * 2) + +/* Write bit */ +#define MAX3107_WRITE_BIT (1 << 15) + +/* SPI TX data mask */ +#define MAX3107_SPI_RX_DATA_MASK (0x00ff) + +/* SPI RX data mask */ +#define MAX3107_SPI_TX_DATA_MASK (0x00ff) + +/* Register access masks */ +#define MAX3107_RHR_REG (0x0000) /* RX FIFO */ +#define MAX3107_THR_REG (0x0000) /* TX FIFO */ +#define MAX3107_IRQEN_REG (0x0100) /* IRQ enable */ +#define MAX3107_IRQSTS_REG (0x0200) /* IRQ status */ +#define MAX3107_LSR_IRQEN_REG (0x0300) /* LSR IRQ enable */ +#define MAX3107_LSR_IRQSTS_REG (0x0400) /* LSR IRQ status */ +#define MAX3107_SPCHR_IRQEN_REG (0x0500) /* Special char IRQ enable */ +#define MAX3107_SPCHR_IRQSTS_REG (0x0600) /* Special char IRQ status */ +#define MAX3107_STS_IRQEN_REG (0x0700) /* Status IRQ enable */ +#define MAX3107_STS_IRQSTS_REG (0x0800) /* Status IRQ status */ +#define MAX3107_MODE1_REG (0x0900) /* MODE1 */ +#define MAX3107_MODE2_REG (0x0a00) /* MODE2 */ +#define MAX3107_LCR_REG (0x0b00) /* LCR */ +#define MAX3107_RXTO_REG (0x0c00) /* RX timeout */ +#define MAX3107_HDPIXDELAY_REG (0x0d00) /* Auto transceiver delays */ +#define MAX3107_IRDA_REG (0x0e00) /* IRDA settings */ +#define MAX3107_FLOWLVL_REG (0x0f00) /* Flow control levels */ +#define MAX3107_FIFOTRIGLVL_REG (0x1000) /* FIFO IRQ trigger levels */ +#define MAX3107_TXFIFOLVL_REG (0x1100) /* TX FIFO level */ +#define MAX3107_RXFIFOLVL_REG (0x1200) /* RX FIFO level */ +#define MAX3107_FLOWCTRL_REG (0x1300) /* Flow control */ +#define MAX3107_XON1_REG (0x1400) /* XON1 character */ +#define MAX3107_XON2_REG (0x1500) /* XON2 character */ +#define MAX3107_XOFF1_REG (0x1600) /* XOFF1 character */ +#define MAX3107_XOFF2_REG (0x1700) /* XOFF2 character */ +#define MAX3107_GPIOCFG_REG (0x1800) /* GPIO config */ +#define MAX3107_GPIODATA_REG (0x1900) /* GPIO data */ +#define MAX3107_PLLCFG_REG (0x1a00) /* PLL config */ +#define MAX3107_BRGCFG_REG (0x1b00) /* Baud rate generator conf */ +#define MAX3107_BRGDIVLSB_REG (0x1c00) /* Baud rate divisor LSB */ +#define MAX3107_BRGDIVMSB_REG (0x1d00) /* Baud rate divisor MSB */ +#define MAX3107_CLKSRC_REG (0x1e00) /* Clock source */ +#define MAX3107_REVID_REG (0x1f00) /* Revision identification */ + +/* IRQ register bits */ +#define MAX3107_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */ +#define MAX3107_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */ +#define MAX3107_IRQ_STS_BIT (1 << 2) /* Status interrupt */ +#define MAX3107_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */ +#define MAX3107_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */ +#define MAX3107_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */ +#define MAX3107_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */ +#define MAX3107_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */ + +/* LSR register bits */ +#define MAX3107_LSR_RXTO_BIT (1 << 0) /* RX timeout */ +#define MAX3107_LSR_RXOVR_BIT (1 << 1) /* RX overrun */ +#define MAX3107_LSR_RXPAR_BIT (1 << 2) /* RX parity error */ +#define MAX3107_LSR_FRERR_BIT (1 << 3) /* Frame error */ +#define MAX3107_LSR_RXBRK_BIT (1 << 4) /* RX break */ +#define MAX3107_LSR_RXNOISE_BIT (1 << 5) /* RX noise */ +#define MAX3107_LSR_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_LSR_CTS_BIT (1 << 7) /* CTS pin state */ + +/* Special character register bits */ +#define MAX3107_SPCHR_XON1_BIT (1 << 0) /* XON1 character */ +#define MAX3107_SPCHR_XON2_BIT (1 << 1) /* XON2 character */ +#define MAX3107_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */ +#define MAX3107_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */ +#define MAX3107_SPCHR_BREAK_BIT (1 << 4) /* RX break */ +#define MAX3107_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */ +#define MAX3107_SPCHR_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_SPCHR_UNDEF7_BIT (1 << 7) /* Undefined/not used */ + +/* Status register bits */ +#define MAX3107_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */ +#define MAX3107_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */ +#define MAX3107_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */ +#define MAX3107_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */ +#define MAX3107_STS_UNDEF4_BIT (1 << 4) /* Undefined/not used */ +#define MAX3107_STS_CLKREADY_BIT (1 << 5) /* Clock ready */ +#define MAX3107_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */ +#define MAX3107_STS_UNDEF7_BIT (1 << 7) /* Undefined/not used */ + +/* MODE1 register bits */ +#define MAX3107_MODE1_RXDIS_BIT (1 << 0) /* RX disable */ +#define MAX3107_MODE1_TXDIS_BIT (1 << 1) /* TX disable */ +#define MAX3107_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */ +#define MAX3107_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */ +#define MAX3107_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */ +#define MAX3107_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */ +#define MAX3107_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */ +#define MAX3107_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */ + +/* MODE2 register bits */ +#define MAX3107_MODE2_RST_BIT (1 << 0) /* Chip reset */ +#define MAX3107_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */ +#define MAX3107_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */ +#define MAX3107_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */ +#define MAX3107_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */ +#define MAX3107_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */ +#define MAX3107_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */ +#define MAX3107_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */ + +/* LCR register bits */ +#define MAX3107_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */ +#define MAX3107_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1 + * + * Word length bits table: + * 00 -> 5 bit words + * 01 -> 6 bit words + * 10 -> 7 bit words + * 11 -> 8 bit words + */ +#define MAX3107_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit + * + * STOP length bit table: + * 0 -> 1 stop bit + * 1 -> 1-1.5 stop bits if + * word length is 5, + * 2 stop bits otherwise + */ +#define MAX3107_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */ +#define MAX3107_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */ +#define MAX3107_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */ +#define MAX3107_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */ +#define MAX3107_LCR_RTS_BIT (1 << 7) /* RTS pin control */ +#define MAX3107_LCR_WORD_LEN_5 (0x0000) +#define MAX3107_LCR_WORD_LEN_6 (0x0001) +#define MAX3107_LCR_WORD_LEN_7 (0x0002) +#define MAX3107_LCR_WORD_LEN_8 (0x0003) + + +/* IRDA register bits */ +#define MAX3107_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */ +#define MAX3107_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */ +#define MAX3107_IRDA_SHORTIR_BIT (1 << 2) /* Short SIR mode enable */ +#define MAX3107_IRDA_MIR_BIT (1 << 3) /* MIR mode enable */ +#define MAX3107_IRDA_RXINV_BIT (1 << 4) /* RX logic inversion enable */ +#define MAX3107_IRDA_TXINV_BIT (1 << 5) /* TX logic inversion enable */ +#define MAX3107_IRDA_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_IRDA_UNDEF7_BIT (1 << 7) /* Undefined/not used */ + +/* Flow control trigger level register masks */ +#define MAX3107_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */ +#define MAX3107_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */ +#define MAX3107_FLOWLVL_HALT(words) ((words/8) & 0x000f) +#define MAX3107_FLOWLVL_RES(words) (((words/8) & 0x000f) << 4) + +/* FIFO interrupt trigger level register masks */ +#define MAX3107_FIFOTRIGLVL_TX_MASK (0x000f) /* TX FIFO trigger level */ +#define MAX3107_FIFOTRIGLVL_RX_MASK (0x00f0) /* RX FIFO trigger level */ +#define MAX3107_FIFOTRIGLVL_TX(words) ((words/8) & 0x000f) +#define MAX3107_FIFOTRIGLVL_RX(words) (((words/8) & 0x000f) << 4) + +/* Flow control register bits */ +#define MAX3107_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */ +#define MAX3107_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */ +#define MAX3107_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs + * are used in conjunction with + * XOFF2 for definition of + * special character */ +#define MAX3107_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */ +#define MAX3107_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */ +#define MAX3107_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1 + * + * SWFLOW bits 1 & 0 table: + * 00 -> no transmitter flow + * control + * 01 -> receiver compares + * XON2 and XOFF2 + * and controls + * transmitter + * 10 -> receiver compares + * XON1 and XOFF1 + * and controls + * transmitter + * 11 -> receiver compares + * XON1, XON2, XOFF1 and + * XOFF2 and controls + * transmitter + */ +#define MAX3107_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */ +#define MAX3107_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3 + * + * SWFLOW bits 3 & 2 table: + * 00 -> no received flow + * control + * 01 -> transmitter generates + * XON2 and XOFF2 + * 10 -> transmitter generates + * XON1 and XOFF1 + * 11 -> transmitter generates + * XON1, XON2, XOFF1 and + * XOFF2 + */ + +/* GPIO configuration register bits */ +#define MAX3107_GPIOCFG_GP0OUT_BIT (1 << 0) /* GPIO 0 output enable */ +#define MAX3107_GPIOCFG_GP1OUT_BIT (1 << 1) /* GPIO 1 output enable */ +#define MAX3107_GPIOCFG_GP2OUT_BIT (1 << 2) /* GPIO 2 output enable */ +#define MAX3107_GPIOCFG_GP3OUT_BIT (1 << 3) /* GPIO 3 output enable */ +#define MAX3107_GPIOCFG_GP0OD_BIT (1 << 4) /* GPIO 0 open-drain enable */ +#define MAX3107_GPIOCFG_GP1OD_BIT (1 << 5) /* GPIO 1 open-drain enable */ +#define MAX3107_GPIOCFG_GP2OD_BIT (1 << 6) /* GPIO 2 open-drain enable */ +#define MAX3107_GPIOCFG_GP3OD_BIT (1 << 7) /* GPIO 3 open-drain enable */ + +/* GPIO DATA register bits */ +#define MAX3107_GPIODATA_GP0OUT_BIT (1 << 0) /* GPIO 0 output value */ +#define MAX3107_GPIODATA_GP1OUT_BIT (1 << 1) /* GPIO 1 output value */ +#define MAX3107_GPIODATA_GP2OUT_BIT (1 << 2) /* GPIO 2 output value */ +#define MAX3107_GPIODATA_GP3OUT_BIT (1 << 3) /* GPIO 3 output value */ +#define MAX3107_GPIODATA_GP0IN_BIT (1 << 4) /* GPIO 0 input value */ +#define MAX3107_GPIODATA_GP1IN_BIT (1 << 5) /* GPIO 1 input value */ +#define MAX3107_GPIODATA_GP2IN_BIT (1 << 6) /* GPIO 2 input value */ +#define MAX3107_GPIODATA_GP3IN_BIT (1 << 7) /* GPIO 3 input value */ + +/* PLL configuration register masks */ +#define MAX3107_PLLCFG_PREDIV_MASK (0x003f) /* PLL predivision value */ +#define MAX3107_PLLCFG_PLLFACTOR_MASK (0x00c0) /* PLL multiplication factor */ + +/* Baud rate generator configuration register masks and bits */ +#define MAX3107_BRGCFG_FRACT_MASK (0x000f) /* Fractional portion of + * Baud rate generator divisor + */ +#define MAX3107_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */ +#define MAX3107_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */ +#define MAX3107_BRGCFG_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_BRGCFG_UNDEF7_BIT (1 << 7) /* Undefined/not used */ + +/* Clock source register bits */ +#define MAX3107_CLKSRC_INTOSC_BIT (1 << 0) /* Internal osc enable */ +#define MAX3107_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */ +#define MAX3107_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */ +#define MAX3107_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */ +#define MAX3107_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */ +#define MAX3107_CLKSRC_UNDEF5_BIT (1 << 5) /* Undefined/not used */ +#define MAX3107_CLKSRC_UNDEF6_BIT (1 << 6) /* Undefined/not used */ +#define MAX3107_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */ + + +/* HW definitions */ +#define MAX3107_RX_FIFO_SIZE 128 +#define MAX3107_TX_FIFO_SIZE 128 +#define MAX3107_REVID1 0x00a0 +#define MAX3107_REVID2 0x00a1 + + +/* Baud rate generator configuration values for external clock 13MHz */ +#define MAX3107_BRG13_B300 (0x0A9400 | 0x05) +#define MAX3107_BRG13_B600 (0x054A00 | 0x03) +#define MAX3107_BRG13_B1200 (0x02A500 | 0x01) +#define MAX3107_BRG13_B2400 (0x015200 | 0x09) +#define MAX3107_BRG13_B4800 (0x00A900 | 0x04) +#define MAX3107_BRG13_B9600 (0x005400 | 0x0A) +#define MAX3107_BRG13_B19200 (0x002A00 | 0x05) +#define MAX3107_BRG13_B38400 (0x001500 | 0x03) +#define MAX3107_BRG13_B57600 (0x000E00 | 0x02) +#define MAX3107_BRG13_B115200 (0x000700 | 0x01) +#define MAX3107_BRG13_B230400 (0x000300 | 0x08) +#define MAX3107_BRG13_B460800 (0x000100 | 0x0c) +#define MAX3107_BRG13_B921600 (0x000100 | 0x1c) + +/* Baud rate generator configuration values for external clock 26MHz */ +#define MAX3107_BRG26_B300 (0x152800 | 0x0A) +#define MAX3107_BRG26_B600 (0x0A9400 | 0x05) +#define MAX3107_BRG26_B1200 (0x054A00 | 0x03) +#define MAX3107_BRG26_B2400 (0x02A500 | 0x01) +#define MAX3107_BRG26_B4800 (0x015200 | 0x09) +#define MAX3107_BRG26_B9600 (0x00A900 | 0x04) +#define MAX3107_BRG26_B19200 (0x005400 | 0x0A) +#define MAX3107_BRG26_B38400 (0x002A00 | 0x05) +#define MAX3107_BRG26_B57600 (0x001C00 | 0x03) +#define MAX3107_BRG26_B115200 (0x000E00 | 0x02) +#define MAX3107_BRG26_B230400 (0x000700 | 0x01) +#define MAX3107_BRG26_B460800 (0x000300 | 0x08) +#define MAX3107_BRG26_B921600 (0x000100 | 0x0C) + +/* Baud rate generator configuration values for internal clock */ +#define MAX3107_BRG13_IB300 (0x008000 | 0x00) +#define MAX3107_BRG13_IB600 (0x004000 | 0x00) +#define MAX3107_BRG13_IB1200 (0x002000 | 0x00) +#define MAX3107_BRG13_IB2400 (0x001000 | 0x00) +#define MAX3107_BRG13_IB4800 (0x000800 | 0x00) +#define MAX3107_BRG13_IB9600 (0x000400 | 0x00) +#define MAX3107_BRG13_IB19200 (0x000200 | 0x00) +#define MAX3107_BRG13_IB38400 (0x000100 | 0x00) +#define MAX3107_BRG13_IB57600 (0x000000 | 0x0B) +#define MAX3107_BRG13_IB115200 (0x000000 | 0x05) +#define MAX3107_BRG13_IB230400 (0x000000 | 0x03) +#define MAX3107_BRG13_IB460800 (0x000000 | 0x00) +#define MAX3107_BRG13_IB921600 (0x000000 | 0x00) + + +struct baud_table { + int baud; + u32 new_brg; +}; + +struct max3107_port { + /* UART port structure */ + struct uart_port port; + + /* SPI device structure */ + struct spi_device *spi; + +#if defined(CONFIG_GPIOLIB) + /* GPIO chip stucture */ + struct gpio_chip chip; +#endif + + /* Workqueue that does all the magic */ + struct workqueue_struct *workqueue; + struct work_struct work; + + /* Lock for shared data */ + spinlock_t data_lock; + + /* Device configuration */ + int ext_clk; /* 1 if external clock used */ + int loopback; /* Current loopback mode state */ + int baud; /* Current baud rate */ + + /* State flags */ + int suspended; /* Indicates suspend mode */ + int tx_fifo_empty; /* Flag for TX FIFO state */ + int rx_enabled; /* Flag for receiver state */ + int tx_enabled; /* Flag for transmitter state */ + + u16 irqen_reg; /* Current IRQ enable register value */ + /* Shared data */ + u16 mode1_reg; /* Current mode1 register value*/ + int mode1_commit; /* Flag for setting new mode1 register value */ + u16 lcr_reg; /* Current LCR register value */ + int lcr_commit; /* Flag for setting new LCR register value */ + u32 brg_cfg; /* Current Baud rate generator config */ + int brg_commit; /* Flag for setting new baud rate generator + * config + */ + struct baud_table *baud_tbl; + int handle_irq; /* Indicates that IRQ should be handled */ + + /* Rx buffer and str*/ + u16 *rxbuf; + u8 *rxstr; + /* Tx buffer*/ + u16 *txbuf; + + struct max3107_plat *pdata; /* Platform data */ +}; + +/* Platform data structure */ +struct max3107_plat { + /* Loopback mode enable */ + int loopback; + /* External clock enable */ + int ext_clk; + /* Called during the register initialisation */ + void (*init)(struct max3107_port *s); + /* Called when the port is found and configured */ + int (*configure)(struct max3107_port *s); + /* HW suspend function */ + void (*hw_suspend) (struct max3107_port *s, int suspend); + /* Polling mode enable */ + int polled_mode; + /* Polling period if polling mode enabled */ + int poll_time; +}; + +extern int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len); +extern void max3107_hw_susp(struct max3107_port *s, int suspend); +extern int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata); +extern int max3107_remove(struct spi_device *spi); +extern int max3107_suspend(struct spi_device *spi, pm_message_t state); +extern int max3107_resume(struct spi_device *spi); + +#endif /* _LINUX_SERIAL_MAX3107_H */ diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c new file mode 100644 index 000000000000..3394b7cc1722 --- /dev/null +++ b/drivers/tty/serial/mcf.c @@ -0,0 +1,662 @@ +/****************************************************************************/ + +/* + * mcf.c -- Freescale ColdFire UART driver + * + * (C) Copyright 2003-2007, Greg Ungerer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/****************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/****************************************************************************/ + +/* + * Some boards implement the DTR/DCD lines using GPIO lines, most + * don't. Dummy out the access macros for those that don't. Those + * that do should define these macros somewhere in there board + * specific inlude files. + */ +#if !defined(mcf_getppdcd) +#define mcf_getppdcd(p) (1) +#endif +#if !defined(mcf_getppdtr) +#define mcf_getppdtr(p) (1) +#endif +#if !defined(mcf_setppdtr) +#define mcf_setppdtr(p, v) do { } while (0) +#endif + +/****************************************************************************/ + +/* + * Local per-uart structure. + */ +struct mcf_uart { + struct uart_port port; + unsigned int sigs; /* Local copy of line sigs */ + unsigned char imr; /* Local IMR mirror */ +}; + +/****************************************************************************/ + +static unsigned int mcf_tx_empty(struct uart_port *port) +{ + return (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXEMPTY) ? + TIOCSER_TEMT : 0; +} + +/****************************************************************************/ + +static unsigned int mcf_get_mctrl(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + unsigned int sigs; + + sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ? + 0 : TIOCM_CTS; + sigs |= (pp->sigs & TIOCM_RTS); + sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0); + sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0); + + return sigs; +} + +/****************************************************************************/ + +static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + + pp->sigs = sigs; + mcf_setppdtr(port->line, (sigs & TIOCM_DTR)); + if (sigs & TIOCM_RTS) + writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1); + else + writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0); +} + +/****************************************************************************/ + +static void mcf_start_tx(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + + pp->imr |= MCFUART_UIR_TXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); +} + +/****************************************************************************/ + +static void mcf_stop_tx(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + + pp->imr &= ~MCFUART_UIR_TXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); +} + +/****************************************************************************/ + +static void mcf_stop_rx(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + + pp->imr &= ~MCFUART_UIR_RXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); +} + +/****************************************************************************/ + +static void mcf_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (break_state == -1) + writeb(MCFUART_UCR_CMDBREAKSTART, port->membase + MCFUART_UCR); + else + writeb(MCFUART_UCR_CMDBREAKSTOP, port->membase + MCFUART_UCR); + spin_unlock_irqrestore(&port->lock, flags); +} + +/****************************************************************************/ + +static void mcf_enable_ms(struct uart_port *port) +{ +} + +/****************************************************************************/ + +static int mcf_startup(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Reset UART, get it into known state... */ + writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); + writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); + + /* Enable the UART transmitter and receiver */ + writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, + port->membase + MCFUART_UCR); + + /* Enable RX interrupts now */ + pp->imr = MCFUART_UIR_RXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +/****************************************************************************/ + +static void mcf_shutdown(struct uart_port *port) +{ + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable all interrupts now */ + pp->imr = 0; + writeb(pp->imr, port->membase + MCFUART_UIMR); + + /* Disable UART transmitter and receiver */ + writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); + writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/****************************************************************************/ + +static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, baudclk; +#if defined(CONFIG_M5272) + unsigned int baudfr; +#endif + unsigned char mr1, mr2; + + baud = uart_get_baud_rate(port, termios, old, 0, 230400); +#if defined(CONFIG_M5272) + baudclk = (MCF_BUSCLK / baud) / 32; + baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16; +#else + baudclk = ((MCF_BUSCLK / baud) + 16) / 32; +#endif + + mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR; + mr2 = 0; + + switch (termios->c_cflag & CSIZE) { + case CS5: mr1 |= MCFUART_MR1_CS5; break; + case CS6: mr1 |= MCFUART_MR1_CS6; break; + case CS7: mr1 |= MCFUART_MR1_CS7; break; + case CS8: + default: mr1 |= MCFUART_MR1_CS8; break; + } + + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + mr1 |= MCFUART_MR1_PARITYMARK; + else + mr1 |= MCFUART_MR1_PARITYSPACE; + } else { + if (termios->c_cflag & PARODD) + mr1 |= MCFUART_MR1_PARITYODD; + else + mr1 |= MCFUART_MR1_PARITYEVEN; + } + } else { + mr1 |= MCFUART_MR1_PARITYNONE; + } + + if (termios->c_cflag & CSTOPB) + mr2 |= MCFUART_MR2_STOP2; + else + mr2 |= MCFUART_MR2_STOP1; + + if (termios->c_cflag & CRTSCTS) { + mr1 |= MCFUART_MR1_RXRTS; + mr2 |= MCFUART_MR2_TXCTS; + } + + spin_lock_irqsave(&port->lock, flags); + uart_update_timeout(port, termios->c_cflag, baud); + writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); + writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); + writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR); + writeb(mr1, port->membase + MCFUART_UMR); + writeb(mr2, port->membase + MCFUART_UMR); + writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1); + writeb((baudclk & 0xff), port->membase + MCFUART_UBG2); +#if defined(CONFIG_M5272) + writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD); +#endif + writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER, + port->membase + MCFUART_UCSR); + writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, + port->membase + MCFUART_UCR); + spin_unlock_irqrestore(&port->lock, flags); +} + +/****************************************************************************/ + +static void mcf_rx_chars(struct mcf_uart *pp) +{ + struct uart_port *port = &pp->port; + unsigned char status, ch, flag; + + while ((status = readb(port->membase + MCFUART_USR)) & MCFUART_USR_RXREADY) { + ch = readb(port->membase + MCFUART_URB); + flag = TTY_NORMAL; + port->icount.rx++; + + if (status & MCFUART_USR_RXERR) { + writeb(MCFUART_UCR_CMDRESETERR, + port->membase + MCFUART_UCR); + + if (status & MCFUART_USR_RXBREAK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (status & MCFUART_USR_RXPARITY) { + port->icount.parity++; + } else if (status & MCFUART_USR_RXOVERRUN) { + port->icount.overrun++; + } else if (status & MCFUART_USR_RXFRAMING) { + port->icount.frame++; + } + + status &= port->read_status_mask; + + if (status & MCFUART_USR_RXBREAK) + flag = TTY_BREAK; + else if (status & MCFUART_USR_RXPARITY) + flag = TTY_PARITY; + else if (status & MCFUART_USR_RXFRAMING) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + continue; + uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag); + } + + tty_flip_buffer_push(port->state->port.tty); +} + +/****************************************************************************/ + +static void mcf_tx_chars(struct mcf_uart *pp) +{ + struct uart_port *port = &pp->port; + struct circ_buf *xmit = &port->state->xmit; + + if (port->x_char) { + /* Send special char - probably flow control */ + writeb(port->x_char, port->membase + MCFUART_UTB); + port->x_char = 0; + port->icount.tx++; + return; + } + + while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) { + if (xmit->head == xmit->tail) + break; + writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (xmit->head == xmit->tail) { + pp->imr &= ~MCFUART_UIR_TXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); + } +} + +/****************************************************************************/ + +static irqreturn_t mcf_interrupt(int irq, void *data) +{ + struct uart_port *port = data; + struct mcf_uart *pp = container_of(port, struct mcf_uart, port); + unsigned int isr; + irqreturn_t ret = IRQ_NONE; + + isr = readb(port->membase + MCFUART_UISR) & pp->imr; + + spin_lock(&port->lock); + if (isr & MCFUART_UIR_RXREADY) { + mcf_rx_chars(pp); + ret = IRQ_HANDLED; + } + if (isr & MCFUART_UIR_TXREADY) { + mcf_tx_chars(pp); + ret = IRQ_HANDLED; + } + spin_unlock(&port->lock); + + return ret; +} + +/****************************************************************************/ + +static void mcf_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_MCF; + port->fifosize = MCFUART_TXFIFOSIZE; + + /* Clear mask, so no surprise interrupts. */ + writeb(0, port->membase + MCFUART_UIMR); + + if (request_irq(port->irq, mcf_interrupt, IRQF_DISABLED, "UART", port)) + printk(KERN_ERR "MCF: unable to attach ColdFire UART %d " + "interrupt vector=%d\n", port->line, port->irq); +} + +/****************************************************************************/ + +static const char *mcf_type(struct uart_port *port) +{ + return (port->type == PORT_MCF) ? "ColdFire UART" : NULL; +} + +/****************************************************************************/ + +static int mcf_request_port(struct uart_port *port) +{ + /* UARTs always present */ + return 0; +} + +/****************************************************************************/ + +static void mcf_release_port(struct uart_port *port) +{ + /* Nothing to release... */ +} + +/****************************************************************************/ + +static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_MCF)) + return -EINVAL; + return 0; +} + +/****************************************************************************/ + +/* + * Define the basic serial functions we support. + */ +static const struct uart_ops mcf_uart_ops = { + .tx_empty = mcf_tx_empty, + .get_mctrl = mcf_get_mctrl, + .set_mctrl = mcf_set_mctrl, + .start_tx = mcf_start_tx, + .stop_tx = mcf_stop_tx, + .stop_rx = mcf_stop_rx, + .enable_ms = mcf_enable_ms, + .break_ctl = mcf_break_ctl, + .startup = mcf_startup, + .shutdown = mcf_shutdown, + .set_termios = mcf_set_termios, + .type = mcf_type, + .request_port = mcf_request_port, + .release_port = mcf_release_port, + .config_port = mcf_config_port, + .verify_port = mcf_verify_port, +}; + +static struct mcf_uart mcf_ports[4]; + +#define MCF_MAXPORTS ARRAY_SIZE(mcf_ports) + +/****************************************************************************/ +#if defined(CONFIG_SERIAL_MCF_CONSOLE) +/****************************************************************************/ + +int __init early_mcf_setup(struct mcf_platform_uart *platp) +{ + struct uart_port *port; + int i; + + for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) { + port = &mcf_ports[i].port; + + port->line = i; + port->type = PORT_MCF; + port->mapbase = platp[i].mapbase; + port->membase = (platp[i].membase) ? platp[i].membase : + (unsigned char __iomem *) port->mapbase; + port->iotype = SERIAL_IO_MEM; + port->irq = platp[i].irq; + port->uartclk = MCF_BUSCLK; + port->flags = ASYNC_BOOT_AUTOCONF; + port->ops = &mcf_uart_ops; + } + + return 0; +} + +/****************************************************************************/ + +static void mcf_console_putc(struct console *co, const char c) +{ + struct uart_port *port = &(mcf_ports + co->index)->port; + int i; + + for (i = 0; (i < 0x10000); i++) { + if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) + break; + } + writeb(c, port->membase + MCFUART_UTB); + for (i = 0; (i < 0x10000); i++) { + if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) + break; + } +} + +/****************************************************************************/ + +static void mcf_console_write(struct console *co, const char *s, unsigned int count) +{ + for (; (count); count--, s++) { + mcf_console_putc(co, *s); + if (*s == '\n') + mcf_console_putc(co, '\r'); + } +} + +/****************************************************************************/ + +static int __init mcf_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = CONFIG_SERIAL_MCF_BAUDRATE; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if ((co->index < 0) || (co->index >= MCF_MAXPORTS)) + co->index = 0; + port = &mcf_ports[co->index].port; + if (port->membase == 0) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +/****************************************************************************/ + +static struct uart_driver mcf_driver; + +static struct console mcf_console = { + .name = "ttyS", + .write = mcf_console_write, + .device = uart_console_device, + .setup = mcf_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &mcf_driver, +}; + +static int __init mcf_console_init(void) +{ + register_console(&mcf_console); + return 0; +} + +console_initcall(mcf_console_init); + +#define MCF_CONSOLE &mcf_console + +/****************************************************************************/ +#else +/****************************************************************************/ + +#define MCF_CONSOLE NULL + +/****************************************************************************/ +#endif /* CONFIG_MCF_CONSOLE */ +/****************************************************************************/ + +/* + * Define the mcf UART driver structure. + */ +static struct uart_driver mcf_driver = { + .owner = THIS_MODULE, + .driver_name = "mcf", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = MCF_MAXPORTS, + .cons = MCF_CONSOLE, +}; + +/****************************************************************************/ + +static int __devinit mcf_probe(struct platform_device *pdev) +{ + struct mcf_platform_uart *platp = pdev->dev.platform_data; + struct uart_port *port; + int i; + + for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) { + port = &mcf_ports[i].port; + + port->line = i; + port->type = PORT_MCF; + port->mapbase = platp[i].mapbase; + port->membase = (platp[i].membase) ? platp[i].membase : + (unsigned char __iomem *) platp[i].mapbase; + port->iotype = SERIAL_IO_MEM; + port->irq = platp[i].irq; + port->uartclk = MCF_BUSCLK; + port->ops = &mcf_uart_ops; + port->flags = ASYNC_BOOT_AUTOCONF; + + uart_add_one_port(&mcf_driver, port); + } + + return 0; +} + +/****************************************************************************/ + +static int __devexit mcf_remove(struct platform_device *pdev) +{ + struct uart_port *port; + int i; + + for (i = 0; (i < MCF_MAXPORTS); i++) { + port = &mcf_ports[i].port; + if (port) + uart_remove_one_port(&mcf_driver, port); + } + + return 0; +} + +/****************************************************************************/ + +static struct platform_driver mcf_platform_driver = { + .probe = mcf_probe, + .remove = __devexit_p(mcf_remove), + .driver = { + .name = "mcfuart", + .owner = THIS_MODULE, + }, +}; + +/****************************************************************************/ + +static int __init mcf_init(void) +{ + int rc; + + printk("ColdFire internal UART serial driver\n"); + + rc = uart_register_driver(&mcf_driver); + if (rc) + return rc; + rc = platform_driver_register(&mcf_platform_driver); + if (rc) + return rc; + return 0; +} + +/****************************************************************************/ + +static void __exit mcf_exit(void) +{ + platform_driver_unregister(&mcf_platform_driver); + uart_unregister_driver(&mcf_driver); +} + +/****************************************************************************/ + +module_init(mcf_init); +module_exit(mcf_exit); + +MODULE_AUTHOR("Greg Ungerer "); +MODULE_DESCRIPTION("Freescale ColdFire UART driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mcfuart"); + +/****************************************************************************/ diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c new file mode 100644 index 000000000000..d40010a22ecd --- /dev/null +++ b/drivers/tty/serial/mfd.c @@ -0,0 +1,1513 @@ +/* + * mfd.c: driver for High Speed UART device of Intel Medfield platform + * + * Refer pxa.c, 8250.c and some other drivers in drivers/serial/ + * + * (C) Copyright 2010 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +/* Notes: + * 1. DMA channel allocation: 0/1 channel are assigned to port 0, + * 2/3 chan to port 1, 4/5 chan to port 3. Even number chans + * are used for RX, odd chans for TX + * + * 2. In A0 stepping, UART will not support TX half empty flag + * + * 3. The RI/DSR/DCD/DTR are not pinned out, DCD & DSR are always + * asserted, only when the HW is reset the DDCD and DDSR will + * be triggered + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MFD_HSU_A0_STEPPING 1 + +#define HSU_DMA_BUF_SIZE 2048 + +#define chan_readl(chan, offset) readl(chan->reg + offset) +#define chan_writel(chan, offset, val) writel(val, chan->reg + offset) + +#define mfd_readl(obj, offset) readl(obj->reg + offset) +#define mfd_writel(obj, offset, val) writel(val, obj->reg + offset) + +#define HSU_DMA_TIMEOUT_CHECK_FREQ (HZ/10) + +struct hsu_dma_buffer { + u8 *buf; + dma_addr_t dma_addr; + u32 dma_size; + u32 ofs; +}; + +struct hsu_dma_chan { + u32 id; + enum dma_data_direction dirt; + struct uart_hsu_port *uport; + void __iomem *reg; + struct timer_list rx_timer; /* only needed by RX channel */ +}; + +struct uart_hsu_port { + struct uart_port port; + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned int lsr_break_flag; + char name[12]; + int index; + struct device *dev; + + struct hsu_dma_chan *txc; + struct hsu_dma_chan *rxc; + struct hsu_dma_buffer txbuf; + struct hsu_dma_buffer rxbuf; + int use_dma; /* flag for DMA/PIO */ + int running; + int dma_tx_on; +}; + +/* Top level data structure of HSU */ +struct hsu_port { + void __iomem *reg; + unsigned long paddr; + unsigned long iolen; + u32 irq; + + struct uart_hsu_port port[3]; + struct hsu_dma_chan chans[10]; + + struct dentry *debugfs; +}; + +static inline unsigned int serial_in(struct uart_hsu_port *up, int offset) +{ + unsigned int val; + + if (offset > UART_MSR) { + offset <<= 2; + val = readl(up->port.membase + offset); + } else + val = (unsigned int)readb(up->port.membase + offset); + + return val; +} + +static inline void serial_out(struct uart_hsu_port *up, int offset, int value) +{ + if (offset > UART_MSR) { + offset <<= 2; + writel(value, up->port.membase + offset); + } else { + unsigned char val = value & 0xff; + writeb(val, up->port.membase + offset); + } +} + +#ifdef CONFIG_DEBUG_FS + +#define HSU_REGS_BUFSIZE 1024 + +static int hsu_show_regs_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +static ssize_t port_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct uart_hsu_port *up = file->private_data; + char *buf; + u32 len = 0; + ssize_t ret; + + buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL); + if (!buf) + return 0; + + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MFD HSU port[%d] regs:\n", up->index); + + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "=================================\n"); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "IER: \t\t0x%08x\n", serial_in(up, UART_IER)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "IIR: \t\t0x%08x\n", serial_in(up, UART_IIR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "LCR: \t\t0x%08x\n", serial_in(up, UART_LCR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MCR: \t\t0x%08x\n", serial_in(up, UART_MCR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "LSR: \t\t0x%08x\n", serial_in(up, UART_LSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MSR: \t\t0x%08x\n", serial_in(up, UART_MSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "FOR: \t\t0x%08x\n", serial_in(up, UART_FOR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "PS: \t\t0x%08x\n", serial_in(up, UART_PS)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MUL: \t\t0x%08x\n", serial_in(up, UART_MUL)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "DIV: \t\t0x%08x\n", serial_in(up, UART_DIV)); + + if (len > HSU_REGS_BUFSIZE) + len = HSU_REGS_BUFSIZE; + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return ret; +} + +static ssize_t dma_show_regs(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct hsu_dma_chan *chan = file->private_data; + char *buf; + u32 len = 0; + ssize_t ret; + + buf = kzalloc(HSU_REGS_BUFSIZE, GFP_KERNEL); + if (!buf) + return 0; + + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MFD HSU DMA channel [%d] regs:\n", chan->id); + + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "=================================\n"); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "CR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_CR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "DCR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_DCR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "BSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_BSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "MOTSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_MOTSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0SAR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D0TSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1SAR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D1TSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2SAR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D2TSR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0SAR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3SAR)); + len += snprintf(buf + len, HSU_REGS_BUFSIZE - len, + "D0TSR: \t\t0x%08x\n", chan_readl(chan, HSU_CH_D3TSR)); + + if (len > HSU_REGS_BUFSIZE) + len = HSU_REGS_BUFSIZE; + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, len); + kfree(buf); + return ret; +} + +static const struct file_operations port_regs_ops = { + .owner = THIS_MODULE, + .open = hsu_show_regs_open, + .read = port_show_regs, + .llseek = default_llseek, +}; + +static const struct file_operations dma_regs_ops = { + .owner = THIS_MODULE, + .open = hsu_show_regs_open, + .read = dma_show_regs, + .llseek = default_llseek, +}; + +static int hsu_debugfs_init(struct hsu_port *hsu) +{ + int i; + char name[32]; + + hsu->debugfs = debugfs_create_dir("hsu", NULL); + if (!hsu->debugfs) + return -ENOMEM; + + for (i = 0; i < 3; i++) { + snprintf(name, sizeof(name), "port_%d_regs", i); + debugfs_create_file(name, S_IFREG | S_IRUGO, + hsu->debugfs, (void *)(&hsu->port[i]), &port_regs_ops); + } + + for (i = 0; i < 6; i++) { + snprintf(name, sizeof(name), "dma_chan_%d_regs", i); + debugfs_create_file(name, S_IFREG | S_IRUGO, + hsu->debugfs, (void *)&hsu->chans[i], &dma_regs_ops); + } + + return 0; +} + +static void hsu_debugfs_remove(struct hsu_port *hsu) +{ + if (hsu->debugfs) + debugfs_remove_recursive(hsu->debugfs); +} + +#else +static inline int hsu_debugfs_init(struct hsu_port *hsu) +{ + return 0; +} + +static inline void hsu_debugfs_remove(struct hsu_port *hsu) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +static void serial_hsu_enable_ms(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +void hsu_dma_tx(struct uart_hsu_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + struct hsu_dma_buffer *dbuf = &up->txbuf; + int count; + + /* test_and_set_bit may be better, but anyway it's in lock protected mode */ + if (up->dma_tx_on) + return; + + /* Update the circ buf info */ + xmit->tail += dbuf->ofs; + xmit->tail &= UART_XMIT_SIZE - 1; + + up->port.icount.tx += dbuf->ofs; + dbuf->ofs = 0; + + /* Disable the channel */ + chan_writel(up->txc, HSU_CH_CR, 0x0); + + if (!uart_circ_empty(xmit) && !uart_tx_stopped(&up->port)) { + dma_sync_single_for_device(up->port.dev, + dbuf->dma_addr, + dbuf->dma_size, + DMA_TO_DEVICE); + + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + dbuf->ofs = count; + + /* Reprogram the channel */ + chan_writel(up->txc, HSU_CH_D0SAR, dbuf->dma_addr + xmit->tail); + chan_writel(up->txc, HSU_CH_D0TSR, count); + + /* Reenable the channel */ + chan_writel(up->txc, HSU_CH_DCR, 0x1 + | (0x1 << 8) + | (0x1 << 16) + | (0x1 << 24)); + up->dma_tx_on = 1; + chan_writel(up->txc, HSU_CH_CR, 0x1); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); +} + +/* The buffer is already cache coherent */ +void hsu_dma_start_rx_chan(struct hsu_dma_chan *rxc, struct hsu_dma_buffer *dbuf) +{ + dbuf->ofs = 0; + + chan_writel(rxc, HSU_CH_BSR, 32); + chan_writel(rxc, HSU_CH_MOTSR, 4); + + chan_writel(rxc, HSU_CH_D0SAR, dbuf->dma_addr); + chan_writel(rxc, HSU_CH_D0TSR, dbuf->dma_size); + chan_writel(rxc, HSU_CH_DCR, 0x1 | (0x1 << 8) + | (0x1 << 16) + | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ + ); + chan_writel(rxc, HSU_CH_CR, 0x3); + + mod_timer(&rxc->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); +} + +/* Protected by spin_lock_irqsave(port->lock) */ +static void serial_hsu_start_tx(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + + if (up->use_dma) { + hsu_dma_tx(up); + } else if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_hsu_stop_tx(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + struct hsu_dma_chan *txc = up->txc; + + if (up->use_dma) + chan_writel(txc, HSU_CH_CR, 0x0); + else if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +/* This is always called in spinlock protected mode, so + * modify timeout timer is safe here */ +void hsu_dma_rx(struct uart_hsu_port *up, u32 int_sts) +{ + struct hsu_dma_buffer *dbuf = &up->rxbuf; + struct hsu_dma_chan *chan = up->rxc; + struct uart_port *port = &up->port; + struct tty_struct *tty = port->state->port.tty; + int count; + + if (!tty) + return; + + /* + * First need to know how many is already transferred, + * then check if its a timeout DMA irq, and return + * the trail bytes out, push them up and reenable the + * channel + */ + + /* Timeout IRQ, need wait some time, see Errata 2 */ + if (int_sts & 0xf00) + udelay(2); + + /* Stop the channel */ + chan_writel(chan, HSU_CH_CR, 0x0); + + count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; + if (!count) { + /* Restart the channel before we leave */ + chan_writel(chan, HSU_CH_CR, 0x3); + return; + } + del_timer(&chan->rx_timer); + + dma_sync_single_for_cpu(port->dev, dbuf->dma_addr, + dbuf->dma_size, DMA_FROM_DEVICE); + + /* + * Head will only wrap around when we recycle + * the DMA buffer, and when that happens, we + * explicitly set tail to 0. So head will + * always be greater than tail. + */ + tty_insert_flip_string(tty, dbuf->buf, count); + port->icount.rx += count; + + dma_sync_single_for_device(up->port.dev, dbuf->dma_addr, + dbuf->dma_size, DMA_FROM_DEVICE); + + /* Reprogram the channel */ + chan_writel(chan, HSU_CH_D0SAR, dbuf->dma_addr); + chan_writel(chan, HSU_CH_D0TSR, dbuf->dma_size); + chan_writel(chan, HSU_CH_DCR, 0x1 + | (0x1 << 8) + | (0x1 << 16) + | (0x1 << 24) /* timeout bit, see HSU Errata 1 */ + ); + tty_flip_buffer_push(tty); + + chan_writel(chan, HSU_CH_CR, 0x3); + chan->rx_timer.expires = jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ; + add_timer(&chan->rx_timer); + +} + +static void serial_hsu_stop_rx(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + struct hsu_dma_chan *chan = up->rxc; + + if (up->use_dma) + chan_writel(chan, HSU_CH_CR, 0x2); + else { + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); + } +} + +static inline void receive_chars(struct uart_hsu_port *up, int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned int ch, flag; + unsigned int max_count = 256; + + if (!tty) + return; + + do { + ch = serial_in(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + + dev_warn(up->dev, "We really rush into ERR/BI case" + "status = 0x%02x", *status); + /* For statistics only */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* Mask off conditions which should be ignored. */ + *status &= up->port.read_status_mask; + +#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE + if (up->port.cons && + up->port.cons->index == up->port.line) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } +#endif + if (*status & UART_LSR_BI) { + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + + uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); + ignore_char: + *status = serial_in(up, UART_LSR); + } while ((*status & UART_LSR_DR) && max_count--); + tty_flip_buffer_push(tty); +} + +static void transmit_chars(struct uart_hsu_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_out(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_hsu_stop_tx(&up->port); + return; + } + +#ifndef MFD_HSU_A0_STEPPING + count = up->port.fifosize / 2; +#else + /* + * A0 only supports fully empty IRQ, and the first char written + * into it won't clear the EMPT bit, so we may need be cautious + * by useing a shorter buffer + */ + count = up->port.fifosize - 4; +#endif + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + serial_hsu_stop_tx(&up->port); +} + +static inline void check_modem_status(struct uart_hsu_port *up) +{ + int status; + + status = serial_in(up, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + /* We may only get DDCD when HW init and reset */ + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + /* Will start/stop_tx accordingly */ + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); +} + +/* + * This handles the interrupt from one port. + */ +static irqreturn_t port_irq(int irq, void *dev_id) +{ + struct uart_hsu_port *up = dev_id; + unsigned int iir, lsr; + unsigned long flags; + + if (unlikely(!up->running)) + return IRQ_NONE; + + spin_lock_irqsave(&up->port.lock, flags); + if (up->use_dma) { + lsr = serial_in(up, UART_LSR); + if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) + dev_warn(up->dev, + "Got lsr irq while using DMA, lsr = 0x%2x\n", + lsr); + check_modem_status(up); + spin_unlock_irqrestore(&up->port.lock, flags); + return IRQ_HANDLED; + } + + iir = serial_in(up, UART_IIR); + if (iir & UART_IIR_NO_INT) { + spin_unlock_irqrestore(&up->port.lock, flags); + return IRQ_NONE; + } + + lsr = serial_in(up, UART_LSR); + if (lsr & UART_LSR_DR) + receive_chars(up, &lsr); + check_modem_status(up); + + /* lsr will be renewed during the receive_chars */ + if (lsr & UART_LSR_THRE) + transmit_chars(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + return IRQ_HANDLED; +} + +static inline void dma_chan_irq(struct hsu_dma_chan *chan) +{ + struct uart_hsu_port *up = chan->uport; + unsigned long flags; + u32 int_sts; + + spin_lock_irqsave(&up->port.lock, flags); + + if (!up->use_dma || !up->running) + goto exit; + + /* + * No matter what situation, need read clear the IRQ status + * There is a bug, see Errata 5, HSD 2900918 + */ + int_sts = chan_readl(chan, HSU_CH_SR); + + /* Rx channel */ + if (chan->dirt == DMA_FROM_DEVICE) + hsu_dma_rx(up, int_sts); + + /* Tx channel */ + if (chan->dirt == DMA_TO_DEVICE) { + chan_writel(chan, HSU_CH_CR, 0x0); + up->dma_tx_on = 0; + hsu_dma_tx(up); + } + +exit: + spin_unlock_irqrestore(&up->port.lock, flags); + return; +} + +static irqreturn_t dma_irq(int irq, void *dev_id) +{ + struct hsu_port *hsu = dev_id; + u32 int_sts, i; + + int_sts = mfd_readl(hsu, HSU_GBL_DMAISR); + + /* Currently we only have 6 channels may be used */ + for (i = 0; i < 6; i++) { + if (int_sts & 0x1) + dma_chan_irq(&hsu->chans[i]); + int_sts >>= 1; + } + + return IRQ_HANDLED; +} + +static unsigned int serial_hsu_tx_empty(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_hsu_get_mctrl(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned char status; + unsigned int ret; + + status = serial_in(up, UART_MSR); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial_hsu_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr |= up->mcr; + + serial_out(up, UART_MCR, mcr); +} + +static void serial_hsu_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* + * What special to do: + * 1. chose the 64B fifo mode + * 2. make sure not to select half empty mode for A0 stepping + * 3. start dma or pio depends on configuration + * 4. we only allocate dma memory when needed + */ +static int serial_hsu_startup(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned long flags; + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); + + /* Clear the interrupt registers. */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + /* Now, initialize the UART, default is 8n1 */ + serial_out(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + + up->port.mctrl |= TIOCM_OUT2; + serial_hsu_set_mctrl(&up->port, up->port.mctrl); + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + if (!up->use_dma) + up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE; + else + up->ier = 0; + serial_out(up, UART_IER, up->ier); + + spin_unlock_irqrestore(&up->port.lock, flags); + + /* DMA init */ + if (up->use_dma) { + struct hsu_dma_buffer *dbuf; + struct circ_buf *xmit = &port->state->xmit; + + up->dma_tx_on = 0; + + /* First allocate the RX buffer */ + dbuf = &up->rxbuf; + dbuf->buf = kzalloc(HSU_DMA_BUF_SIZE, GFP_KERNEL); + if (!dbuf->buf) { + up->use_dma = 0; + goto exit; + } + dbuf->dma_addr = dma_map_single(port->dev, + dbuf->buf, + HSU_DMA_BUF_SIZE, + DMA_FROM_DEVICE); + dbuf->dma_size = HSU_DMA_BUF_SIZE; + + /* Start the RX channel right now */ + hsu_dma_start_rx_chan(up->rxc, dbuf); + + /* Next init the TX DMA */ + dbuf = &up->txbuf; + dbuf->buf = xmit->buf; + dbuf->dma_addr = dma_map_single(port->dev, + dbuf->buf, + UART_XMIT_SIZE, + DMA_TO_DEVICE); + dbuf->dma_size = UART_XMIT_SIZE; + + /* This should not be changed all around */ + chan_writel(up->txc, HSU_CH_BSR, 32); + chan_writel(up->txc, HSU_CH_MOTSR, 4); + dbuf->ofs = 0; + } + +exit: + /* And clear the interrupt registers again for luck. */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + up->running = 1; + return 0; +} + +static void serial_hsu_shutdown(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + unsigned long flags; + + del_timer_sync(&up->rxc->rx_timer); + + /* Disable interrupts from this port */ + up->ier = 0; + serial_out(up, UART_IER, 0); + up->running = 0; + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl &= ~TIOCM_OUT2; + serial_hsu_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* Disable break condition and FIFOs */ + serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); +} + +static void +serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + struct tty_struct *tty = port->state->port.tty; + unsigned char cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + u32 ps, mul; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + /* CMSPAR isn't supported by this driver */ + if (tty) + tty->termios->c_cflag &= ~CMSPAR; + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + + /* + * The base clk is 50Mhz, and the baud rate come from: + * baud = 50M * MUL / (DIV * PS * DLAB) + * + * For those basic low baud rate we can get the direct + * scalar from 2746800, like 115200 = 2746800/24. For those + * higher baud rate, we handle them case by case, mainly by + * adjusting the MUL/PS registers, and DIV register is kept + * as default value 0x3d09 to make things simple + */ + baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + + quot = 1; + ps = 0x10; + mul = 0x3600; + switch (baud) { + case 3500000: + mul = 0x3345; + ps = 0xC; + break; + case 1843200: + mul = 0x2400; + break; + case 3000000: + case 2500000: + case 2000000: + case 1500000: + case 1000000: + case 500000: + /* mul/ps/quot = 0x9C4/0x10/0x1 will make a 500000 bps */ + mul = baud / 500000 * 0x9C4; + break; + default: + /* Use uart_get_divisor to get quot for other baud rates */ + quot = 0; + } + + if (!quot) + quot = uart_get_divisor(port, baud); + + if ((up->port.uartclk / quot) < (2400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_1B; + else if ((up->port.uartclk / quot) < (230400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_16B; + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_HSU_64_32B; + + fcr |= UART_FCR_HSU_64B_FIFO; +#ifdef MFD_HSU_A0_STEPPING + /* A0 doesn't support half empty IRQ */ + fcr |= UART_FCR_FULL_EMPT_TXI; +#endif + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* Update the per-port timeout */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* Characters to ignore */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* Ignore all characters if CREAD is not set */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts, disable + * MSI by default + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + if (termios->c_cflag & CRTSCTS) + up->mcr |= UART_MCR_AFE | UART_MCR_RTS; + else + up->mcr &= ~UART_MCR_AFE; + + serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ + serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ + serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + serial_out(up, UART_LCR, cval); /* reset DLAB */ + serial_out(up, UART_MUL, mul); /* set MUL */ + serial_out(up, UART_PS, ps); /* set PS */ + up->lcr = cval; /* Save LCR */ + serial_hsu_set_mctrl(&up->port, up->port.mctrl); + serial_out(up, UART_FCR, fcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +serial_hsu_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ +} + +static void serial_hsu_release_port(struct uart_port *port) +{ +} + +static int serial_hsu_request_port(struct uart_port *port) +{ + return 0; +} + +static void serial_hsu_config_port(struct uart_port *port, int flags) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + up->port.type = PORT_MFD; +} + +static int +serial_hsu_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* We don't want the core code to modify any port params */ + return -EINVAL; +} + +static const char * +serial_hsu_type(struct uart_port *port) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + return up->name; +} + +/* Mainly for uart console use */ +static struct uart_hsu_port *serial_hsu_ports[3]; +static struct uart_driver serial_hsu_reg; + +#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* Wait for transmitter & holding register to empty */ +static inline void wait_for_xmitr(struct uart_hsu_port *up) +{ + unsigned int status, tmout = 1000; + + /* Wait up to 1ms for the character to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while (!(status & BOTH_EMPTY)); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + udelay(1); + } +} + +static void serial_hsu_console_putchar(struct uart_port *port, int ch) +{ + struct uart_hsu_port *up = + container_of(port, struct uart_hsu_port, port); + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial_hsu_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_hsu_port *up = serial_hsu_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + local_irq_save(flags); + if (up->port.sysrq) + locked = 0; + else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); + } else + spin_lock(&up->port.lock); + + /* First save the IER then disable the interrupts */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + + uart_console_write(&up->port, s, count, serial_hsu_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static struct console serial_hsu_console; + +static int __init +serial_hsu_console_setup(struct console *co, char *options) +{ + struct uart_hsu_port *up; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + if (co->index == -1 || co->index >= serial_hsu_reg.nr) + co->index = 0; + up = serial_hsu_ports[co->index]; + if (!up) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + ret = uart_set_options(&up->port, co, baud, parity, bits, flow); + + return ret; +} + +static struct console serial_hsu_console = { + .name = "ttyMFD", + .write = serial_hsu_console_write, + .device = uart_console_device, + .setup = serial_hsu_console_setup, + .flags = CON_PRINTBUFFER, + .index = 2, + .data = &serial_hsu_reg, +}; +#endif + +struct uart_ops serial_hsu_pops = { + .tx_empty = serial_hsu_tx_empty, + .set_mctrl = serial_hsu_set_mctrl, + .get_mctrl = serial_hsu_get_mctrl, + .stop_tx = serial_hsu_stop_tx, + .start_tx = serial_hsu_start_tx, + .stop_rx = serial_hsu_stop_rx, + .enable_ms = serial_hsu_enable_ms, + .break_ctl = serial_hsu_break_ctl, + .startup = serial_hsu_startup, + .shutdown = serial_hsu_shutdown, + .set_termios = serial_hsu_set_termios, + .pm = serial_hsu_pm, + .type = serial_hsu_type, + .release_port = serial_hsu_release_port, + .request_port = serial_hsu_request_port, + .config_port = serial_hsu_config_port, + .verify_port = serial_hsu_verify_port, +}; + +static struct uart_driver serial_hsu_reg = { + .owner = THIS_MODULE, + .driver_name = "MFD serial", + .dev_name = "ttyMFD", + .major = TTY_MAJOR, + .minor = 128, + .nr = 3, +}; + +#ifdef CONFIG_PM +static int serial_hsu_suspend(struct pci_dev *pdev, pm_message_t state) +{ + void *priv = pci_get_drvdata(pdev); + struct uart_hsu_port *up; + + /* Make sure this is not the internal dma controller */ + if (priv && (pdev->device != 0x081E)) { + up = priv; + uart_suspend_port(&serial_hsu_reg, &up->port); + } + + pci_save_state(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return 0; +} + +static int serial_hsu_resume(struct pci_dev *pdev) +{ + void *priv = pci_get_drvdata(pdev); + struct uart_hsu_port *up; + int ret; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + ret = pci_enable_device(pdev); + if (ret) + dev_warn(&pdev->dev, + "HSU: can't re-enable device, try to continue\n"); + + if (priv && (pdev->device != 0x081E)) { + up = priv; + uart_resume_port(&serial_hsu_reg, &up->port); + } + return 0; +} +#else +#define serial_hsu_suspend NULL +#define serial_hsu_resume NULL +#endif + +/* temp global pointer before we settle down on using one or four PCI dev */ +static struct hsu_port *phsu; + +static int serial_hsu_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct uart_hsu_port *uport; + int index, ret; + + printk(KERN_INFO "HSU: found PCI Serial controller(ID: %04x:%04x)\n", + pdev->vendor, pdev->device); + + switch (pdev->device) { + case 0x081B: + index = 0; + break; + case 0x081C: + index = 1; + break; + case 0x081D: + index = 2; + break; + case 0x081E: + /* internal DMA controller */ + index = 3; + break; + default: + dev_err(&pdev->dev, "HSU: out of index!"); + return -ENODEV; + } + + ret = pci_enable_device(pdev); + if (ret) + return ret; + + if (index == 3) { + /* DMA controller */ + ret = request_irq(pdev->irq, dma_irq, 0, "hsu_dma", phsu); + if (ret) { + dev_err(&pdev->dev, "can not get IRQ\n"); + goto err_disable; + } + pci_set_drvdata(pdev, phsu); + } else { + /* UART port 0~2 */ + uport = &phsu->port[index]; + uport->port.irq = pdev->irq; + uport->port.dev = &pdev->dev; + uport->dev = &pdev->dev; + + ret = request_irq(pdev->irq, port_irq, 0, uport->name, uport); + if (ret) { + dev_err(&pdev->dev, "can not get IRQ\n"); + goto err_disable; + } + uart_add_one_port(&serial_hsu_reg, &uport->port); + +#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE + if (index == 2) { + register_console(&serial_hsu_console); + uport->port.cons = &serial_hsu_console; + } +#endif + pci_set_drvdata(pdev, uport); + } + + return 0; + +err_disable: + pci_disable_device(pdev); + return ret; +} + +static void hsu_dma_rx_timeout(unsigned long data) +{ + struct hsu_dma_chan *chan = (void *)data; + struct uart_hsu_port *up = chan->uport; + struct hsu_dma_buffer *dbuf = &up->rxbuf; + int count = 0; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + count = chan_readl(chan, HSU_CH_D0SAR) - dbuf->dma_addr; + + if (!count) { + mod_timer(&chan->rx_timer, jiffies + HSU_DMA_TIMEOUT_CHECK_FREQ); + goto exit; + } + + hsu_dma_rx(up, 0); +exit: + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void hsu_global_init(void) +{ + struct hsu_port *hsu; + struct uart_hsu_port *uport; + struct hsu_dma_chan *dchan; + int i, ret; + + hsu = kzalloc(sizeof(struct hsu_port), GFP_KERNEL); + if (!hsu) + return; + + /* Get basic io resource and map it */ + hsu->paddr = 0xffa28000; + hsu->iolen = 0x1000; + + if (!(request_mem_region(hsu->paddr, hsu->iolen, "HSU global"))) + pr_warning("HSU: error in request mem region\n"); + + hsu->reg = ioremap_nocache((unsigned long)hsu->paddr, hsu->iolen); + if (!hsu->reg) { + pr_err("HSU: error in ioremap\n"); + ret = -ENOMEM; + goto err_free_region; + } + + /* Initialise the 3 UART ports */ + uport = hsu->port; + for (i = 0; i < 3; i++) { + uport->port.type = PORT_MFD; + uport->port.iotype = UPIO_MEM; + uport->port.mapbase = (resource_size_t)hsu->paddr + + HSU_PORT_REG_OFFSET + + i * HSU_PORT_REG_LENGTH; + uport->port.membase = hsu->reg + HSU_PORT_REG_OFFSET + + i * HSU_PORT_REG_LENGTH; + + sprintf(uport->name, "hsu_port%d", i); + uport->port.fifosize = 64; + uport->port.ops = &serial_hsu_pops; + uport->port.line = i; + uport->port.flags = UPF_IOREMAP; + /* set the scalable maxim support rate to 2746800 bps */ + uport->port.uartclk = 115200 * 24 * 16; + + uport->running = 0; + uport->txc = &hsu->chans[i * 2]; + uport->rxc = &hsu->chans[i * 2 + 1]; + + serial_hsu_ports[i] = uport; + uport->index = i; + uport++; + } + + /* Initialise 6 dma channels */ + dchan = hsu->chans; + for (i = 0; i < 6; i++) { + dchan->id = i; + dchan->dirt = (i & 0x1) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + dchan->uport = &hsu->port[i/2]; + dchan->reg = hsu->reg + HSU_DMA_CHANS_REG_OFFSET + + i * HSU_DMA_CHANS_REG_LENGTH; + + /* Work around for RX */ + if (dchan->dirt == DMA_FROM_DEVICE) { + init_timer(&dchan->rx_timer); + dchan->rx_timer.function = hsu_dma_rx_timeout; + dchan->rx_timer.data = (unsigned long)dchan; + } + dchan++; + } + + phsu = hsu; + hsu_debugfs_init(hsu); + return; + +err_free_region: + release_mem_region(hsu->paddr, hsu->iolen); + kfree(hsu); + return; +} + +static void serial_hsu_remove(struct pci_dev *pdev) +{ + void *priv = pci_get_drvdata(pdev); + struct uart_hsu_port *up; + + if (!priv) + return; + + /* For port 0/1/2, priv is the address of uart_hsu_port */ + if (pdev->device != 0x081E) { + up = priv; + uart_remove_one_port(&serial_hsu_reg, &up->port); + } + + pci_set_drvdata(pdev, NULL); + free_irq(pdev->irq, priv); + pci_disable_device(pdev); +} + +/* First 3 are UART ports, and the 4th is the DMA */ +static const struct pci_device_id pci_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081B) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081C) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081D) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081E) }, + {}, +}; + +static struct pci_driver hsu_pci_driver = { + .name = "HSU serial", + .id_table = pci_ids, + .probe = serial_hsu_probe, + .remove = __devexit_p(serial_hsu_remove), + .suspend = serial_hsu_suspend, + .resume = serial_hsu_resume, +}; + +static int __init hsu_pci_init(void) +{ + int ret; + + hsu_global_init(); + + ret = uart_register_driver(&serial_hsu_reg); + if (ret) + return ret; + + return pci_register_driver(&hsu_pci_driver); +} + +static void __exit hsu_pci_exit(void) +{ + pci_unregister_driver(&hsu_pci_driver); + uart_unregister_driver(&serial_hsu_reg); + + hsu_debugfs_remove(phsu); + + kfree(phsu); +} + +module_init(hsu_pci_init); +module_exit(hsu_pci_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:medfield-hsu"); diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c new file mode 100644 index 000000000000..126ec7f568ec --- /dev/null +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -0,0 +1,1527 @@ +/* + * Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs. + * + * FIXME According to the usermanual the status bits in the status register + * are only updated when the peripherals access the FIFO and not when the + * CPU access them. So since we use this bits to know when we stop writing + * and reading, they may not be updated in-time and a race condition may + * exists. But I haven't be able to prove this and I don't care. But if + * any problem arises, it might worth checking. The TX/RX FIFO Stats + * registers should be used in addition. + * Update: Actually, they seem updated ... At least the bits we use. + * + * + * Maintainer : Sylvain Munaut + * + * Some of the code has been inspired/copied from the 2.4 code written + * by Dale Farnsworth . + * + * Copyright (C) 2008 Freescale Semiconductor Inc. + * John Rigby + * Added support for MPC5121 + * Copyright (C) 2006 Secret Lab Technologies Ltd. + * Grant Likely + * Copyright (C) 2004-2006 Sylvain Munaut + * Copyright (C) 2003 MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + + +/* We've been assigned a range on the "Low-density serial ports" major */ +#define SERIAL_PSC_MAJOR 204 +#define SERIAL_PSC_MINOR 148 + + +#define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */ + + +static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM]; + /* Rem: - We use the read_status_mask as a shadow of + * psc->mpc52xx_psc_imr + * - It's important that is array is all zero on start as we + * use it to know if it's initialized or not ! If it's not sure + * it's cleared, then a memset(...,0,...) should be added to + * the console_init + */ + +/* lookup table for matching device nodes to index numbers */ +static struct device_node *mpc52xx_uart_nodes[MPC52xx_PSC_MAXNUM]; + +static void mpc52xx_uart_of_enumerate(void); + + +#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase)) + + +/* Forward declaration of the interruption handling routine */ +static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id); +static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port); + + +/* Simple macro to test if a port is console or not. This one is taken + * for serial_core.c and maybe should be moved to serial_core.h ? */ +#ifdef CONFIG_SERIAL_CORE_CONSOLE +#define uart_console(port) \ + ((port)->cons && (port)->cons->index == (port)->line) +#else +#define uart_console(port) (0) +#endif + +/* ======================================================================== */ +/* PSC fifo operations for isolating differences between 52xx and 512x */ +/* ======================================================================== */ + +struct psc_ops { + void (*fifo_init)(struct uart_port *port); + int (*raw_rx_rdy)(struct uart_port *port); + int (*raw_tx_rdy)(struct uart_port *port); + int (*rx_rdy)(struct uart_port *port); + int (*tx_rdy)(struct uart_port *port); + int (*tx_empty)(struct uart_port *port); + void (*stop_rx)(struct uart_port *port); + void (*start_tx)(struct uart_port *port); + void (*stop_tx)(struct uart_port *port); + void (*rx_clr_irq)(struct uart_port *port); + void (*tx_clr_irq)(struct uart_port *port); + void (*write_char)(struct uart_port *port, unsigned char c); + unsigned char (*read_char)(struct uart_port *port); + void (*cw_disable_ints)(struct uart_port *port); + void (*cw_restore_ints)(struct uart_port *port); + unsigned int (*set_baudrate)(struct uart_port *port, + struct ktermios *new, + struct ktermios *old); + int (*clock)(struct uart_port *port, int enable); + int (*fifoc_init)(void); + void (*fifoc_uninit)(void); + void (*get_irq)(struct uart_port *, struct device_node *); + irqreturn_t (*handle_irq)(struct uart_port *port); +}; + +/* setting the prescaler and divisor reg is common for all chips */ +static inline void mpc52xx_set_divisor(struct mpc52xx_psc __iomem *psc, + u16 prescaler, unsigned int divisor) +{ + /* select prescaler */ + out_be16(&psc->mpc52xx_psc_clock_select, prescaler); + out_8(&psc->ctur, divisor >> 8); + out_8(&psc->ctlr, divisor & 0xff); +} + +#ifdef CONFIG_PPC_MPC52xx +#define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1)) +static void mpc52xx_psc_fifo_init(struct uart_port *port) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port); + + out_8(&fifo->rfcntl, 0x00); + out_be16(&fifo->rfalarm, 0x1ff); + out_8(&fifo->tfcntl, 0x07); + out_be16(&fifo->tfalarm, 0x80); + + port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY; + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); +} + +static int mpc52xx_psc_raw_rx_rdy(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_status) + & MPC52xx_PSC_SR_RXRDY; +} + +static int mpc52xx_psc_raw_tx_rdy(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_status) + & MPC52xx_PSC_SR_TXRDY; +} + + +static int mpc52xx_psc_rx_rdy(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_isr) + & port->read_status_mask + & MPC52xx_PSC_IMR_RXRDY; +} + +static int mpc52xx_psc_tx_rdy(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_isr) + & port->read_status_mask + & MPC52xx_PSC_IMR_TXRDY; +} + +static int mpc52xx_psc_tx_empty(struct uart_port *port) +{ + return in_be16(&PSC(port)->mpc52xx_psc_status) + & MPC52xx_PSC_SR_TXEMP; +} + +static void mpc52xx_psc_start_tx(struct uart_port *port) +{ + port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); +} + +static void mpc52xx_psc_stop_tx(struct uart_port *port) +{ + port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); +} + +static void mpc52xx_psc_stop_rx(struct uart_port *port) +{ + port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); +} + +static void mpc52xx_psc_rx_clr_irq(struct uart_port *port) +{ +} + +static void mpc52xx_psc_tx_clr_irq(struct uart_port *port) +{ +} + +static void mpc52xx_psc_write_char(struct uart_port *port, unsigned char c) +{ + out_8(&PSC(port)->mpc52xx_psc_buffer_8, c); +} + +static unsigned char mpc52xx_psc_read_char(struct uart_port *port) +{ + return in_8(&PSC(port)->mpc52xx_psc_buffer_8); +} + +static void mpc52xx_psc_cw_disable_ints(struct uart_port *port) +{ + out_be16(&PSC(port)->mpc52xx_psc_imr, 0); +} + +static void mpc52xx_psc_cw_restore_ints(struct uart_port *port) +{ + out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask); +} + +static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned int divisor; + + /* The 5200 has a fixed /32 prescaler, uartclk contains the ipb freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (32 * 0xffff) + 1, + port->uartclk / 32); + divisor = (port->uartclk + 16 * baud) / (32 * baud); + + /* enable the /32 prescaler and set the divisor */ + mpc52xx_set_divisor(PSC(port), 0xdd00, divisor); + return baud; +} + +static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned int divisor; + u16 prescaler; + + /* The 5200B has a selectable /4 or /32 prescaler, uartclk contains the + * ipb freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (32 * 0xffff) + 1, + port->uartclk / 4); + divisor = (port->uartclk + 2 * baud) / (4 * baud); + + /* select the proper prescaler and set the divisor */ + if (divisor > 0xffff) { + divisor = (divisor + 4) / 8; + prescaler = 0xdd00; /* /32 */ + } else + prescaler = 0xff00; /* /4 */ + mpc52xx_set_divisor(PSC(port), prescaler, divisor); + return baud; +} + +static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np) +{ + port->irqflags = IRQF_DISABLED; + port->irq = irq_of_parse_and_map(np, 0); +} + +/* 52xx specific interrupt handler. The caller holds the port lock */ +static irqreturn_t mpc52xx_psc_handle_irq(struct uart_port *port) +{ + return mpc5xxx_uart_process_int(port); +} + +static struct psc_ops mpc52xx_psc_ops = { + .fifo_init = mpc52xx_psc_fifo_init, + .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy, + .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy, + .rx_rdy = mpc52xx_psc_rx_rdy, + .tx_rdy = mpc52xx_psc_tx_rdy, + .tx_empty = mpc52xx_psc_tx_empty, + .stop_rx = mpc52xx_psc_stop_rx, + .start_tx = mpc52xx_psc_start_tx, + .stop_tx = mpc52xx_psc_stop_tx, + .rx_clr_irq = mpc52xx_psc_rx_clr_irq, + .tx_clr_irq = mpc52xx_psc_tx_clr_irq, + .write_char = mpc52xx_psc_write_char, + .read_char = mpc52xx_psc_read_char, + .cw_disable_ints = mpc52xx_psc_cw_disable_ints, + .cw_restore_ints = mpc52xx_psc_cw_restore_ints, + .set_baudrate = mpc5200_psc_set_baudrate, + .get_irq = mpc52xx_psc_get_irq, + .handle_irq = mpc52xx_psc_handle_irq, +}; + +static struct psc_ops mpc5200b_psc_ops = { + .fifo_init = mpc52xx_psc_fifo_init, + .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy, + .raw_tx_rdy = mpc52xx_psc_raw_tx_rdy, + .rx_rdy = mpc52xx_psc_rx_rdy, + .tx_rdy = mpc52xx_psc_tx_rdy, + .tx_empty = mpc52xx_psc_tx_empty, + .stop_rx = mpc52xx_psc_stop_rx, + .start_tx = mpc52xx_psc_start_tx, + .stop_tx = mpc52xx_psc_stop_tx, + .rx_clr_irq = mpc52xx_psc_rx_clr_irq, + .tx_clr_irq = mpc52xx_psc_tx_clr_irq, + .write_char = mpc52xx_psc_write_char, + .read_char = mpc52xx_psc_read_char, + .cw_disable_ints = mpc52xx_psc_cw_disable_ints, + .cw_restore_ints = mpc52xx_psc_cw_restore_ints, + .set_baudrate = mpc5200b_psc_set_baudrate, + .get_irq = mpc52xx_psc_get_irq, + .handle_irq = mpc52xx_psc_handle_irq, +}; + +#endif /* CONFIG_MPC52xx */ + +#ifdef CONFIG_PPC_MPC512x +#define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1)) + +/* PSC FIFO Controller for mpc512x */ +struct psc_fifoc { + u32 fifoc_cmd; + u32 fifoc_int; + u32 fifoc_dma; + u32 fifoc_axe; + u32 fifoc_debug; +}; + +static struct psc_fifoc __iomem *psc_fifoc; +static unsigned int psc_fifoc_irq; + +static void mpc512x_psc_fifo_init(struct uart_port *port) +{ + /* /32 prescaler */ + out_be16(&PSC(port)->mpc52xx_psc_clock_select, 0xdd00); + + out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE); + out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); + out_be32(&FIFO_512x(port)->txalarm, 1); + out_be32(&FIFO_512x(port)->tximr, 0); + + out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_RESET_SLICE); + out_be32(&FIFO_512x(port)->rxcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); + out_be32(&FIFO_512x(port)->rxalarm, 1); + out_be32(&FIFO_512x(port)->rximr, 0); + + out_be32(&FIFO_512x(port)->tximr, MPC512x_PSC_FIFO_ALARM); + out_be32(&FIFO_512x(port)->rximr, MPC512x_PSC_FIFO_ALARM); +} + +static int mpc512x_psc_raw_rx_rdy(struct uart_port *port) +{ + return !(in_be32(&FIFO_512x(port)->rxsr) & MPC512x_PSC_FIFO_EMPTY); +} + +static int mpc512x_psc_raw_tx_rdy(struct uart_port *port) +{ + return !(in_be32(&FIFO_512x(port)->txsr) & MPC512x_PSC_FIFO_FULL); +} + +static int mpc512x_psc_rx_rdy(struct uart_port *port) +{ + return in_be32(&FIFO_512x(port)->rxsr) + & in_be32(&FIFO_512x(port)->rximr) + & MPC512x_PSC_FIFO_ALARM; +} + +static int mpc512x_psc_tx_rdy(struct uart_port *port) +{ + return in_be32(&FIFO_512x(port)->txsr) + & in_be32(&FIFO_512x(port)->tximr) + & MPC512x_PSC_FIFO_ALARM; +} + +static int mpc512x_psc_tx_empty(struct uart_port *port) +{ + return in_be32(&FIFO_512x(port)->txsr) + & MPC512x_PSC_FIFO_EMPTY; +} + +static void mpc512x_psc_stop_rx(struct uart_port *port) +{ + unsigned long rx_fifo_imr; + + rx_fifo_imr = in_be32(&FIFO_512x(port)->rximr); + rx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_512x(port)->rximr, rx_fifo_imr); +} + +static void mpc512x_psc_start_tx(struct uart_port *port) +{ + unsigned long tx_fifo_imr; + + tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr); + tx_fifo_imr |= MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr); +} + +static void mpc512x_psc_stop_tx(struct uart_port *port) +{ + unsigned long tx_fifo_imr; + + tx_fifo_imr = in_be32(&FIFO_512x(port)->tximr); + tx_fifo_imr &= ~MPC512x_PSC_FIFO_ALARM; + out_be32(&FIFO_512x(port)->tximr, tx_fifo_imr); +} + +static void mpc512x_psc_rx_clr_irq(struct uart_port *port) +{ + out_be32(&FIFO_512x(port)->rxisr, in_be32(&FIFO_512x(port)->rxisr)); +} + +static void mpc512x_psc_tx_clr_irq(struct uart_port *port) +{ + out_be32(&FIFO_512x(port)->txisr, in_be32(&FIFO_512x(port)->txisr)); +} + +static void mpc512x_psc_write_char(struct uart_port *port, unsigned char c) +{ + out_8(&FIFO_512x(port)->txdata_8, c); +} + +static unsigned char mpc512x_psc_read_char(struct uart_port *port) +{ + return in_8(&FIFO_512x(port)->rxdata_8); +} + +static void mpc512x_psc_cw_disable_ints(struct uart_port *port) +{ + port->read_status_mask = + in_be32(&FIFO_512x(port)->tximr) << 16 | + in_be32(&FIFO_512x(port)->rximr); + out_be32(&FIFO_512x(port)->tximr, 0); + out_be32(&FIFO_512x(port)->rximr, 0); +} + +static void mpc512x_psc_cw_restore_ints(struct uart_port *port) +{ + out_be32(&FIFO_512x(port)->tximr, + (port->read_status_mask >> 16) & 0x7f); + out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f); +} + +static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port, + struct ktermios *new, + struct ktermios *old) +{ + unsigned int baud; + unsigned int divisor; + + /* + * The "MPC5121e Microcontroller Reference Manual, Rev. 3" says on + * pg. 30-10 that the chip supports a /32 and a /10 prescaler. + * Furthermore, it states that "After reset, the prescaler by 10 + * for the UART mode is selected", but the reset register value is + * 0x0000 which means a /32 prescaler. This is wrong. + * + * In reality using /32 prescaler doesn't work, as it is not supported! + * Use /16 or /10 prescaler, see "MPC5121e Hardware Design Guide", + * Chapter 4.1 PSC in UART Mode. + * Calculate with a /16 prescaler here. + */ + + /* uartclk contains the ips freq */ + baud = uart_get_baud_rate(port, new, old, + port->uartclk / (16 * 0xffff) + 1, + port->uartclk / 16); + divisor = (port->uartclk + 8 * baud) / (16 * baud); + + /* enable the /16 prescaler and set the divisor */ + mpc52xx_set_divisor(PSC(port), 0xdd00, divisor); + return baud; +} + +/* Init PSC FIFO Controller */ +static int __init mpc512x_psc_fifoc_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, + "fsl,mpc5121-psc-fifo"); + if (!np) { + pr_err("%s: Can't find FIFOC node\n", __func__); + return -ENODEV; + } + + psc_fifoc = of_iomap(np, 0); + if (!psc_fifoc) { + pr_err("%s: Can't map FIFOC\n", __func__); + of_node_put(np); + return -ENODEV; + } + + psc_fifoc_irq = irq_of_parse_and_map(np, 0); + of_node_put(np); + if (psc_fifoc_irq == NO_IRQ) { + pr_err("%s: Can't get FIFOC irq\n", __func__); + iounmap(psc_fifoc); + return -ENODEV; + } + + return 0; +} + +static void __exit mpc512x_psc_fifoc_uninit(void) +{ + iounmap(psc_fifoc); +} + +/* 512x specific interrupt handler. The caller holds the port lock */ +static irqreturn_t mpc512x_psc_handle_irq(struct uart_port *port) +{ + unsigned long fifoc_int; + int psc_num; + + /* Read pending PSC FIFOC interrupts */ + fifoc_int = in_be32(&psc_fifoc->fifoc_int); + + /* Check if it is an interrupt for this port */ + psc_num = (port->mapbase & 0xf00) >> 8; + if (test_bit(psc_num, &fifoc_int) || + test_bit(psc_num + 16, &fifoc_int)) + return mpc5xxx_uart_process_int(port); + + return IRQ_NONE; +} + +static int mpc512x_psc_clock(struct uart_port *port, int enable) +{ + struct clk *psc_clk; + int psc_num; + char clk_name[10]; + + if (uart_console(port)) + return 0; + + psc_num = (port->mapbase & 0xf00) >> 8; + snprintf(clk_name, sizeof(clk_name), "psc%d_clk", psc_num); + psc_clk = clk_get(port->dev, clk_name); + if (IS_ERR(psc_clk)) { + dev_err(port->dev, "Failed to get PSC clock entry!\n"); + return -ENODEV; + } + + dev_dbg(port->dev, "%s %sable\n", clk_name, enable ? "en" : "dis"); + + if (enable) + clk_enable(psc_clk); + else + clk_disable(psc_clk); + + return 0; +} + +static void mpc512x_psc_get_irq(struct uart_port *port, struct device_node *np) +{ + port->irqflags = IRQF_SHARED; + port->irq = psc_fifoc_irq; +} + +static struct psc_ops mpc512x_psc_ops = { + .fifo_init = mpc512x_psc_fifo_init, + .raw_rx_rdy = mpc512x_psc_raw_rx_rdy, + .raw_tx_rdy = mpc512x_psc_raw_tx_rdy, + .rx_rdy = mpc512x_psc_rx_rdy, + .tx_rdy = mpc512x_psc_tx_rdy, + .tx_empty = mpc512x_psc_tx_empty, + .stop_rx = mpc512x_psc_stop_rx, + .start_tx = mpc512x_psc_start_tx, + .stop_tx = mpc512x_psc_stop_tx, + .rx_clr_irq = mpc512x_psc_rx_clr_irq, + .tx_clr_irq = mpc512x_psc_tx_clr_irq, + .write_char = mpc512x_psc_write_char, + .read_char = mpc512x_psc_read_char, + .cw_disable_ints = mpc512x_psc_cw_disable_ints, + .cw_restore_ints = mpc512x_psc_cw_restore_ints, + .set_baudrate = mpc512x_psc_set_baudrate, + .clock = mpc512x_psc_clock, + .fifoc_init = mpc512x_psc_fifoc_init, + .fifoc_uninit = mpc512x_psc_fifoc_uninit, + .get_irq = mpc512x_psc_get_irq, + .handle_irq = mpc512x_psc_handle_irq, +}; +#endif + +static struct psc_ops *psc_ops; + +/* ======================================================================== */ +/* UART operations */ +/* ======================================================================== */ + +static unsigned int +mpc52xx_uart_tx_empty(struct uart_port *port) +{ + return psc_ops->tx_empty(port) ? TIOCSER_TEMT : 0; +} + +static void +mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + if (mctrl & TIOCM_RTS) + out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS); + else + out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS); +} + +static unsigned int +mpc52xx_uart_get_mctrl(struct uart_port *port) +{ + unsigned int ret = TIOCM_DSR; + u8 status = in_8(&PSC(port)->mpc52xx_psc_ipcr); + + if (!(status & MPC52xx_PSC_CTS)) + ret |= TIOCM_CTS; + if (!(status & MPC52xx_PSC_DCD)) + ret |= TIOCM_CAR; + + return ret; +} + +static void +mpc52xx_uart_stop_tx(struct uart_port *port) +{ + /* port->lock taken by caller */ + psc_ops->stop_tx(port); +} + +static void +mpc52xx_uart_start_tx(struct uart_port *port) +{ + /* port->lock taken by caller */ + psc_ops->start_tx(port); +} + +static void +mpc52xx_uart_send_xchar(struct uart_port *port, char ch) +{ + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); + + port->x_char = ch; + if (ch) { + /* Make sure tx interrupts are on */ + /* Truly necessary ??? They should be anyway */ + psc_ops->start_tx(port); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void +mpc52xx_uart_stop_rx(struct uart_port *port) +{ + /* port->lock taken by caller */ + psc_ops->stop_rx(port); +} + +static void +mpc52xx_uart_enable_ms(struct uart_port *port) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + + /* clear D_*-bits by reading them */ + in_8(&psc->mpc52xx_psc_ipcr); + /* enable CTS and DCD as IPC interrupts */ + out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD); + + port->read_status_mask |= MPC52xx_PSC_IMR_IPC; + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); +} + +static void +mpc52xx_uart_break_ctl(struct uart_port *port, int ctl) +{ + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); + + if (ctl == -1) + out_8(&PSC(port)->command, MPC52xx_PSC_START_BRK); + else + out_8(&PSC(port)->command, MPC52xx_PSC_STOP_BRK); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static int +mpc52xx_uart_startup(struct uart_port *port) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + int ret; + + if (psc_ops->clock) { + ret = psc_ops->clock(port, 1); + if (ret) + return ret; + } + + /* Request IRQ */ + ret = request_irq(port->irq, mpc52xx_uart_int, + port->irqflags, "mpc52xx_psc_uart", port); + if (ret) + return ret; + + /* Reset/activate the port, clear and enable interrupts */ + out_8(&psc->command, MPC52xx_PSC_RST_RX); + out_8(&psc->command, MPC52xx_PSC_RST_TX); + + out_be32(&psc->sicr, 0); /* UART mode DCD ignored */ + + psc_ops->fifo_init(port); + + out_8(&psc->command, MPC52xx_PSC_TX_ENABLE); + out_8(&psc->command, MPC52xx_PSC_RX_ENABLE); + + return 0; +} + +static void +mpc52xx_uart_shutdown(struct uart_port *port) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + + /* Shut down the port. Leave TX active if on a console port */ + out_8(&psc->command, MPC52xx_PSC_RST_RX); + if (!uart_console(port)) + out_8(&psc->command, MPC52xx_PSC_RST_TX); + + port->read_status_mask = 0; + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); + + if (psc_ops->clock) + psc_ops->clock(port, 0); + + /* Release interrupt */ + free_irq(port->irq, port); +} + +static void +mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, + struct ktermios *old) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + unsigned long flags; + unsigned char mr1, mr2; + unsigned int j; + unsigned int baud; + + /* Prepare what we're gonna write */ + mr1 = 0; + + switch (new->c_cflag & CSIZE) { + case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS; + break; + case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS; + break; + case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS; + break; + case CS8: + default: mr1 |= MPC52xx_PSC_MODE_8_BITS; + } + + if (new->c_cflag & PARENB) { + mr1 |= (new->c_cflag & PARODD) ? + MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN; + } else + mr1 |= MPC52xx_PSC_MODE_PARNONE; + + + mr2 = 0; + + if (new->c_cflag & CSTOPB) + mr2 |= MPC52xx_PSC_MODE_TWO_STOP; + else + mr2 |= ((new->c_cflag & CSIZE) == CS5) ? + MPC52xx_PSC_MODE_ONE_STOP_5_BITS : + MPC52xx_PSC_MODE_ONE_STOP; + + if (new->c_cflag & CRTSCTS) { + mr1 |= MPC52xx_PSC_MODE_RXRTS; + mr2 |= MPC52xx_PSC_MODE_TXCTS; + } + + /* Get the lock */ + spin_lock_irqsave(&port->lock, flags); + + /* Do our best to flush TX & RX, so we don't lose anything */ + /* But we don't wait indefinitely ! */ + j = 5000000; /* Maximum wait */ + /* FIXME Can't receive chars since set_termios might be called at early + * boot for the console, all stuff is not yet ready to receive at that + * time and that just makes the kernel oops */ + /* while (j-- && mpc52xx_uart_int_rx_chars(port)); */ + while (!mpc52xx_uart_tx_empty(port) && --j) + udelay(1); + + if (!j) + printk(KERN_ERR "mpc52xx_uart.c: " + "Unable to flush RX & TX fifos in-time in set_termios." + "Some chars may have been lost.\n"); + + /* Reset the TX & RX */ + out_8(&psc->command, MPC52xx_PSC_RST_RX); + out_8(&psc->command, MPC52xx_PSC_RST_TX); + + /* Send new mode settings */ + out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); + out_8(&psc->mode, mr1); + out_8(&psc->mode, mr2); + baud = psc_ops->set_baudrate(port, new, old); + + /* Update the per-port timeout */ + uart_update_timeout(port, new->c_cflag, baud); + + if (UART_ENABLE_MS(port, new->c_cflag)) + mpc52xx_uart_enable_ms(port); + + /* Reenable TX & RX */ + out_8(&psc->command, MPC52xx_PSC_TX_ENABLE); + out_8(&psc->command, MPC52xx_PSC_RX_ENABLE); + + /* We're all set, release the lock */ + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char * +mpc52xx_uart_type(struct uart_port *port) +{ + /* + * We keep using PORT_MPC52xx for historic reasons although it applies + * for MPC512x, too, but print "MPC5xxx" to not irritate users + */ + return port->type == PORT_MPC52xx ? "MPC5xxx PSC" : NULL; +} + +static void +mpc52xx_uart_release_port(struct uart_port *port) +{ + /* remapped by us ? */ + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, sizeof(struct mpc52xx_psc)); +} + +static int +mpc52xx_uart_request_port(struct uart_port *port) +{ + int err; + + if (port->flags & UPF_IOREMAP) /* Need to remap ? */ + port->membase = ioremap(port->mapbase, + sizeof(struct mpc52xx_psc)); + + if (!port->membase) + return -EINVAL; + + err = request_mem_region(port->mapbase, sizeof(struct mpc52xx_psc), + "mpc52xx_psc_uart") != NULL ? 0 : -EBUSY; + + if (err && (port->flags & UPF_IOREMAP)) { + iounmap(port->membase); + port->membase = NULL; + } + + return err; +} + +static void +mpc52xx_uart_config_port(struct uart_port *port, int flags) +{ + if ((flags & UART_CONFIG_TYPE) + && (mpc52xx_uart_request_port(port) == 0)) + port->type = PORT_MPC52xx; +} + +static int +mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx) + return -EINVAL; + + if ((ser->irq != port->irq) || + (ser->io_type != UPIO_MEM) || + (ser->baud_base != port->uartclk) || + (ser->iomem_base != (void *)port->mapbase) || + (ser->hub6 != 0)) + return -EINVAL; + + return 0; +} + + +static struct uart_ops mpc52xx_uart_ops = { + .tx_empty = mpc52xx_uart_tx_empty, + .set_mctrl = mpc52xx_uart_set_mctrl, + .get_mctrl = mpc52xx_uart_get_mctrl, + .stop_tx = mpc52xx_uart_stop_tx, + .start_tx = mpc52xx_uart_start_tx, + .send_xchar = mpc52xx_uart_send_xchar, + .stop_rx = mpc52xx_uart_stop_rx, + .enable_ms = mpc52xx_uart_enable_ms, + .break_ctl = mpc52xx_uart_break_ctl, + .startup = mpc52xx_uart_startup, + .shutdown = mpc52xx_uart_shutdown, + .set_termios = mpc52xx_uart_set_termios, +/* .pm = mpc52xx_uart_pm, Not supported yet */ +/* .set_wake = mpc52xx_uart_set_wake, Not supported yet */ + .type = mpc52xx_uart_type, + .release_port = mpc52xx_uart_release_port, + .request_port = mpc52xx_uart_request_port, + .config_port = mpc52xx_uart_config_port, + .verify_port = mpc52xx_uart_verify_port +}; + + +/* ======================================================================== */ +/* Interrupt handling */ +/* ======================================================================== */ + +static inline int +mpc52xx_uart_int_rx_chars(struct uart_port *port) +{ + struct tty_struct *tty = port->state->port.tty; + unsigned char ch, flag; + unsigned short status; + + /* While we can read, do so ! */ + while (psc_ops->raw_rx_rdy(port)) { + /* Get the char */ + ch = psc_ops->read_char(port); + + /* Handle sysreq char */ +#ifdef SUPPORT_SYSRQ + if (uart_handle_sysrq_char(port, ch)) { + port->sysrq = 0; + continue; + } +#endif + + /* Store it */ + + flag = TTY_NORMAL; + port->icount.rx++; + + status = in_be16(&PSC(port)->mpc52xx_psc_status); + + if (status & (MPC52xx_PSC_SR_PE | + MPC52xx_PSC_SR_FE | + MPC52xx_PSC_SR_RB)) { + + if (status & MPC52xx_PSC_SR_RB) { + flag = TTY_BREAK; + uart_handle_break(port); + port->icount.brk++; + } else if (status & MPC52xx_PSC_SR_PE) { + flag = TTY_PARITY; + port->icount.parity++; + } + else if (status & MPC52xx_PSC_SR_FE) { + flag = TTY_FRAME; + port->icount.frame++; + } + + /* Clear error condition */ + out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT); + + } + tty_insert_flip_char(tty, ch, flag); + if (status & MPC52xx_PSC_SR_OE) { + /* + * Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + port->icount.overrun++; + } + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(tty); + spin_lock(&port->lock); + + return psc_ops->raw_rx_rdy(port); +} + +static inline int +mpc52xx_uart_int_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + /* Process out of band chars */ + if (port->x_char) { + psc_ops->write_char(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return 1; + } + + /* Nothing to do ? */ + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + mpc52xx_uart_stop_tx(port); + return 0; + } + + /* Send chars */ + while (psc_ops->raw_tx_rdy(port)) { + psc_ops->write_char(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + /* Wake up */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + /* Maybe we're done after all */ + if (uart_circ_empty(xmit)) { + mpc52xx_uart_stop_tx(port); + return 0; + } + + return 1; +} + +static irqreturn_t +mpc5xxx_uart_process_int(struct uart_port *port) +{ + unsigned long pass = ISR_PASS_LIMIT; + unsigned int keepgoing; + u8 status; + + /* While we have stuff to do, we continue */ + do { + /* If we don't find anything to do, we stop */ + keepgoing = 0; + + psc_ops->rx_clr_irq(port); + if (psc_ops->rx_rdy(port)) + keepgoing |= mpc52xx_uart_int_rx_chars(port); + + psc_ops->tx_clr_irq(port); + if (psc_ops->tx_rdy(port)) + keepgoing |= mpc52xx_uart_int_tx_chars(port); + + status = in_8(&PSC(port)->mpc52xx_psc_ipcr); + if (status & MPC52xx_PSC_D_DCD) + uart_handle_dcd_change(port, !(status & MPC52xx_PSC_DCD)); + + if (status & MPC52xx_PSC_D_CTS) + uart_handle_cts_change(port, !(status & MPC52xx_PSC_CTS)); + + /* Limit number of iteration */ + if (!(--pass)) + keepgoing = 0; + + } while (keepgoing); + + return IRQ_HANDLED; +} + +static irqreturn_t +mpc52xx_uart_int(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + irqreturn_t ret; + + spin_lock(&port->lock); + + ret = psc_ops->handle_irq(port); + + spin_unlock(&port->lock); + + return ret; +} + +/* ======================================================================== */ +/* Console ( if applicable ) */ +/* ======================================================================== */ + +#ifdef CONFIG_SERIAL_MPC52xx_CONSOLE + +static void __init +mpc52xx_console_get_options(struct uart_port *port, + int *baud, int *parity, int *bits, int *flow) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + unsigned char mr1; + + pr_debug("mpc52xx_console_get_options(port=%p)\n", port); + + /* Read the mode registers */ + out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1); + mr1 = in_8(&psc->mode); + + /* CT{U,L}R are write-only ! */ + *baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; + + /* Parse them */ + switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) { + case MPC52xx_PSC_MODE_5_BITS: + *bits = 5; + break; + case MPC52xx_PSC_MODE_6_BITS: + *bits = 6; + break; + case MPC52xx_PSC_MODE_7_BITS: + *bits = 7; + break; + case MPC52xx_PSC_MODE_8_BITS: + default: + *bits = 8; + } + + if (mr1 & MPC52xx_PSC_MODE_PARNONE) + *parity = 'n'; + else + *parity = mr1 & MPC52xx_PSC_MODE_PARODD ? 'o' : 'e'; +} + +static void +mpc52xx_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_port *port = &mpc52xx_uart_ports[co->index]; + unsigned int i, j; + + /* Disable interrupts */ + psc_ops->cw_disable_ints(port); + + /* Wait the TX buffer to be empty */ + j = 5000000; /* Maximum wait */ + while (!mpc52xx_uart_tx_empty(port) && --j) + udelay(1); + + /* Write all the chars */ + for (i = 0; i < count; i++, s++) { + /* Line return handling */ + if (*s == '\n') + psc_ops->write_char(port, '\r'); + + /* Send the char */ + psc_ops->write_char(port, *s); + + /* Wait the TX buffer to be empty */ + j = 20000; /* Maximum wait */ + while (!mpc52xx_uart_tx_empty(port) && --j) + udelay(1); + } + + /* Restore interrupt state */ + psc_ops->cw_restore_ints(port); +} + + +static int __init +mpc52xx_console_setup(struct console *co, char *options) +{ + struct uart_port *port = &mpc52xx_uart_ports[co->index]; + struct device_node *np = mpc52xx_uart_nodes[co->index]; + unsigned int uartclk; + struct resource res; + int ret; + + int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n", + co, co->index, options); + + if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) { + pr_debug("PSC%x out of range\n", co->index); + return -EINVAL; + } + + if (!np) { + pr_debug("PSC%x not found in device tree\n", co->index); + return -EINVAL; + } + + pr_debug("Console on ttyPSC%x is %s\n", + co->index, mpc52xx_uart_nodes[co->index]->full_name); + + /* Fetch register locations */ + ret = of_address_to_resource(np, 0, &res); + if (ret) { + pr_debug("Could not get resources for PSC%x\n", co->index); + return ret; + } + + uartclk = mpc5xxx_get_bus_frequency(np); + if (uartclk == 0) { + pr_debug("Could not find uart clock frequency!\n"); + return -EINVAL; + } + + /* Basic port init. Needed since we use some uart_??? func before + * real init for early access */ + spin_lock_init(&port->lock); + port->uartclk = uartclk; + port->ops = &mpc52xx_uart_ops; + port->mapbase = res.start; + port->membase = ioremap(res.start, sizeof(struct mpc52xx_psc)); + port->irq = irq_of_parse_and_map(np, 0); + + if (port->membase == NULL) + return -EINVAL; + + pr_debug("mpc52xx-psc uart at %p, mapped to %p, irq=%x, freq=%i\n", + (void *)port->mapbase, port->membase, + port->irq, port->uartclk); + + /* Setup the port parameters accoding to options */ + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow); + + pr_debug("Setting console parameters: %i %i%c1 flow=%c\n", + baud, bits, parity, flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + + +static struct uart_driver mpc52xx_uart_driver; + +static struct console mpc52xx_console = { + .name = "ttyPSC", + .write = mpc52xx_console_write, + .device = uart_console_device, + .setup = mpc52xx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, /* Specified on the cmdline (e.g. console=ttyPSC0) */ + .data = &mpc52xx_uart_driver, +}; + + +static int __init +mpc52xx_console_init(void) +{ + mpc52xx_uart_of_enumerate(); + register_console(&mpc52xx_console); + return 0; +} + +console_initcall(mpc52xx_console_init); + +#define MPC52xx_PSC_CONSOLE &mpc52xx_console +#else +#define MPC52xx_PSC_CONSOLE NULL +#endif + + +/* ======================================================================== */ +/* UART Driver */ +/* ======================================================================== */ + +static struct uart_driver mpc52xx_uart_driver = { + .driver_name = "mpc52xx_psc_uart", + .dev_name = "ttyPSC", + .major = SERIAL_PSC_MAJOR, + .minor = SERIAL_PSC_MINOR, + .nr = MPC52xx_PSC_MAXNUM, + .cons = MPC52xx_PSC_CONSOLE, +}; + +/* ======================================================================== */ +/* OF Platform Driver */ +/* ======================================================================== */ + +static struct of_device_id mpc52xx_uart_of_match[] = { +#ifdef CONFIG_PPC_MPC52xx + { .compatible = "fsl,mpc5200b-psc-uart", .data = &mpc5200b_psc_ops, }, + { .compatible = "fsl,mpc5200-psc-uart", .data = &mpc52xx_psc_ops, }, + /* binding used by old lite5200 device trees: */ + { .compatible = "mpc5200-psc-uart", .data = &mpc52xx_psc_ops, }, + /* binding used by efika: */ + { .compatible = "mpc5200-serial", .data = &mpc52xx_psc_ops, }, +#endif +#ifdef CONFIG_PPC_MPC512x + { .compatible = "fsl,mpc5121-psc-uart", .data = &mpc512x_psc_ops, }, +#endif + {}, +}; + +static int __devinit +mpc52xx_uart_of_probe(struct platform_device *op, const struct of_device_id *match) +{ + int idx = -1; + unsigned int uartclk; + struct uart_port *port = NULL; + struct resource res; + int ret; + + dev_dbg(&op->dev, "mpc52xx_uart_probe(op=%p, match=%p)\n", op, match); + + /* Check validity & presence */ + for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++) + if (mpc52xx_uart_nodes[idx] == op->dev.of_node) + break; + if (idx >= MPC52xx_PSC_MAXNUM) + return -EINVAL; + pr_debug("Found %s assigned to ttyPSC%x\n", + mpc52xx_uart_nodes[idx]->full_name, idx); + + /* set the uart clock to the input clock of the psc, the different + * prescalers are taken into account in the set_baudrate() methods + * of the respective chip */ + uartclk = mpc5xxx_get_bus_frequency(op->dev.of_node); + if (uartclk == 0) { + dev_dbg(&op->dev, "Could not find uart clock frequency!\n"); + return -EINVAL; + } + + /* Init the port structure */ + port = &mpc52xx_uart_ports[idx]; + + spin_lock_init(&port->lock); + port->uartclk = uartclk; + port->fifosize = 512; + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF | + (uart_console(port) ? 0 : UPF_IOREMAP); + port->line = idx; + port->ops = &mpc52xx_uart_ops; + port->dev = &op->dev; + + /* Search for IRQ and mapbase */ + ret = of_address_to_resource(op->dev.of_node, 0, &res); + if (ret) + return ret; + + port->mapbase = res.start; + if (!port->mapbase) { + dev_dbg(&op->dev, "Could not allocate resources for PSC\n"); + return -EINVAL; + } + + psc_ops->get_irq(port, op->dev.of_node); + if (port->irq == NO_IRQ) { + dev_dbg(&op->dev, "Could not get irq\n"); + return -EINVAL; + } + + dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n", + (void *)port->mapbase, port->irq, port->uartclk); + + /* Add the port to the uart sub-system */ + ret = uart_add_one_port(&mpc52xx_uart_driver, port); + if (ret) + return ret; + + dev_set_drvdata(&op->dev, (void *)port); + return 0; +} + +static int +mpc52xx_uart_of_remove(struct platform_device *op) +{ + struct uart_port *port = dev_get_drvdata(&op->dev); + dev_set_drvdata(&op->dev, NULL); + + if (port) + uart_remove_one_port(&mpc52xx_uart_driver, port); + + return 0; +} + +#ifdef CONFIG_PM +static int +mpc52xx_uart_of_suspend(struct platform_device *op, pm_message_t state) +{ + struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev); + + if (port) + uart_suspend_port(&mpc52xx_uart_driver, port); + + return 0; +} + +static int +mpc52xx_uart_of_resume(struct platform_device *op) +{ + struct uart_port *port = (struct uart_port *) dev_get_drvdata(&op->dev); + + if (port) + uart_resume_port(&mpc52xx_uart_driver, port); + + return 0; +} +#endif + +static void +mpc52xx_uart_of_assign(struct device_node *np) +{ + int i; + + /* Find the first free PSC number */ + for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { + if (mpc52xx_uart_nodes[i] == NULL) { + of_node_get(np); + mpc52xx_uart_nodes[i] = np; + return; + } + } +} + +static void +mpc52xx_uart_of_enumerate(void) +{ + static int enum_done; + struct device_node *np; + const struct of_device_id *match; + int i; + + if (enum_done) + return; + + /* Assign index to each PSC in device tree */ + for_each_matching_node(np, mpc52xx_uart_of_match) { + match = of_match_node(mpc52xx_uart_of_match, np); + psc_ops = match->data; + mpc52xx_uart_of_assign(np); + } + + enum_done = 1; + + for (i = 0; i < MPC52xx_PSC_MAXNUM; i++) { + if (mpc52xx_uart_nodes[i]) + pr_debug("%s assigned to ttyPSC%x\n", + mpc52xx_uart_nodes[i]->full_name, i); + } +} + +MODULE_DEVICE_TABLE(of, mpc52xx_uart_of_match); + +static struct of_platform_driver mpc52xx_uart_of_driver = { + .probe = mpc52xx_uart_of_probe, + .remove = mpc52xx_uart_of_remove, +#ifdef CONFIG_PM + .suspend = mpc52xx_uart_of_suspend, + .resume = mpc52xx_uart_of_resume, +#endif + .driver = { + .name = "mpc52xx-psc-uart", + .owner = THIS_MODULE, + .of_match_table = mpc52xx_uart_of_match, + }, +}; + + +/* ======================================================================== */ +/* Module */ +/* ======================================================================== */ + +static int __init +mpc52xx_uart_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n"); + + ret = uart_register_driver(&mpc52xx_uart_driver); + if (ret) { + printk(KERN_ERR "%s: uart_register_driver failed (%i)\n", + __FILE__, ret); + return ret; + } + + mpc52xx_uart_of_enumerate(); + + /* + * Map the PSC FIFO Controller and init if on MPC512x. + */ + if (psc_ops && psc_ops->fifoc_init) { + ret = psc_ops->fifoc_init(); + if (ret) + return ret; + } + + ret = of_register_platform_driver(&mpc52xx_uart_of_driver); + if (ret) { + printk(KERN_ERR "%s: of_register_platform_driver failed (%i)\n", + __FILE__, ret); + uart_unregister_driver(&mpc52xx_uart_driver); + return ret; + } + + return 0; +} + +static void __exit +mpc52xx_uart_exit(void) +{ + if (psc_ops->fifoc_uninit) + psc_ops->fifoc_uninit(); + + of_unregister_platform_driver(&mpc52xx_uart_of_driver); + uart_unregister_driver(&mpc52xx_uart_driver); +} + + +module_init(mpc52xx_uart_init); +module_exit(mpc52xx_uart_exit); + +MODULE_AUTHOR("Sylvain Munaut "); +MODULE_DESCRIPTION("Freescale MPC52xx PSC UART"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c new file mode 100644 index 000000000000..6a9c6605666a --- /dev/null +++ b/drivers/tty/serial/mpsc.c @@ -0,0 +1,2159 @@ +/* + * Generic driver for the MPSC (UART mode) on Marvell parts (e.g., GT64240, + * GT64260, MV64340, MV64360, GT96100, ... ). + * + * Author: Mark A. Greer + * + * Based on an old MPSC driver that was in the linuxppc tree. It appears to + * have been created by Chris Zankel (formerly of MontaVista) but there + * is no proper Copyright so I'm not sure. Apparently, parts were also + * taken from PPCBoot (now U-Boot). Also based on drivers/serial/8250.c + * by Russell King. + * + * 2004 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +/* + * The MPSC interface is much like a typical network controller's interface. + * That is, you set up separate rings of descriptors for transmitting and + * receiving data. There is also a pool of buffers with (one buffer per + * descriptor) that incoming data are dma'd into or outgoing data are dma'd + * out of. + * + * The MPSC requires two other controllers to be able to work. The Baud Rate + * Generator (BRG) provides a clock at programmable frequencies which determines + * the baud rate. The Serial DMA Controller (SDMA) takes incoming data from the + * MPSC and DMA's it into memory or DMA's outgoing data and passes it to the + * MPSC. It is actually the SDMA interrupt that the driver uses to keep the + * transmit and receive "engines" going (i.e., indicate data has been + * transmitted or received). + * + * NOTES: + * + * 1) Some chips have an erratum where several regs cannot be + * read. To work around that, we keep a local copy of those regs in + * 'mpsc_port_info'. + * + * 2) Some chips have an erratum where the ctlr will hang when the SDMA ctlr + * accesses system mem with coherency enabled. For that reason, the driver + * assumes that coherency for that ctlr has been disabled. This means + * that when in a cache coherent system, the driver has to manually manage + * the data cache on the areas that it touches because the dma_* macro are + * basically no-ops. + * + * 3) There is an erratum (on PPC) where you can't use the instruction to do + * a DMA_TO_DEVICE/cache clean so DMA_BIDIRECTIONAL/flushes are used in places + * where a DMA_TO_DEVICE/clean would have [otherwise] sufficed. + * + * 4) AFAICT, hardware flow control isn't supported by the controller --MAG. + */ + + +#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define MPSC_NUM_CTLRS 2 + +/* + * Descriptors and buffers must be cache line aligned. + * Buffers lengths must be multiple of cache line size. + * Number of Tx & Rx descriptors must be powers of 2. + */ +#define MPSC_RXR_ENTRIES 32 +#define MPSC_RXRE_SIZE dma_get_cache_alignment() +#define MPSC_RXR_SIZE (MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE) +#define MPSC_RXBE_SIZE dma_get_cache_alignment() +#define MPSC_RXB_SIZE (MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE) + +#define MPSC_TXR_ENTRIES 32 +#define MPSC_TXRE_SIZE dma_get_cache_alignment() +#define MPSC_TXR_SIZE (MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE) +#define MPSC_TXBE_SIZE dma_get_cache_alignment() +#define MPSC_TXB_SIZE (MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE) + +#define MPSC_DMA_ALLOC_SIZE (MPSC_RXR_SIZE + MPSC_RXB_SIZE + MPSC_TXR_SIZE \ + + MPSC_TXB_SIZE + dma_get_cache_alignment() /* for alignment */) + +/* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */ +struct mpsc_rx_desc { + u16 bufsize; + u16 bytecnt; + u32 cmdstat; + u32 link; + u32 buf_ptr; +} __attribute((packed)); + +struct mpsc_tx_desc { + u16 bytecnt; + u16 shadow; + u32 cmdstat; + u32 link; + u32 buf_ptr; +} __attribute((packed)); + +/* + * Some regs that have the erratum that you can't read them are are shared + * between the two MPSC controllers. This struct contains those shared regs. + */ +struct mpsc_shared_regs { + phys_addr_t mpsc_routing_base_p; + phys_addr_t sdma_intr_base_p; + + void __iomem *mpsc_routing_base; + void __iomem *sdma_intr_base; + + u32 MPSC_MRR_m; + u32 MPSC_RCRR_m; + u32 MPSC_TCRR_m; + u32 SDMA_INTR_CAUSE_m; + u32 SDMA_INTR_MASK_m; +}; + +/* The main driver data structure */ +struct mpsc_port_info { + struct uart_port port; /* Overlay uart_port structure */ + + /* Internal driver state for this ctlr */ + u8 ready; + u8 rcv_data; + tcflag_t c_iflag; /* save termios->c_iflag */ + tcflag_t c_cflag; /* save termios->c_cflag */ + + /* Info passed in from platform */ + u8 mirror_regs; /* Need to mirror regs? */ + u8 cache_mgmt; /* Need manual cache mgmt? */ + u8 brg_can_tune; /* BRG has baud tuning? */ + u32 brg_clk_src; + u16 mpsc_max_idle; + int default_baud; + int default_bits; + int default_parity; + int default_flow; + + /* Physical addresses of various blocks of registers (from platform) */ + phys_addr_t mpsc_base_p; + phys_addr_t sdma_base_p; + phys_addr_t brg_base_p; + + /* Virtual addresses of various blocks of registers (from platform) */ + void __iomem *mpsc_base; + void __iomem *sdma_base; + void __iomem *brg_base; + + /* Descriptor ring and buffer allocations */ + void *dma_region; + dma_addr_t dma_region_p; + + dma_addr_t rxr; /* Rx descriptor ring */ + dma_addr_t rxr_p; /* Phys addr of rxr */ + u8 *rxb; /* Rx Ring I/O buf */ + u8 *rxb_p; /* Phys addr of rxb */ + u32 rxr_posn; /* First desc w/ Rx data */ + + dma_addr_t txr; /* Tx descriptor ring */ + dma_addr_t txr_p; /* Phys addr of txr */ + u8 *txb; /* Tx Ring I/O buf */ + u8 *txb_p; /* Phys addr of txb */ + int txr_head; /* Where new data goes */ + int txr_tail; /* Where sent data comes off */ + spinlock_t tx_lock; /* transmit lock */ + + /* Mirrored values of regs we can't read (if 'mirror_regs' set) */ + u32 MPSC_MPCR_m; + u32 MPSC_CHR_1_m; + u32 MPSC_CHR_2_m; + u32 MPSC_CHR_10_m; + u32 BRG_BCR_m; + struct mpsc_shared_regs *shared_regs; +}; + +/* Hooks to platform-specific code */ +int mpsc_platform_register_driver(void); +void mpsc_platform_unregister_driver(void); + +/* Hooks back in to mpsc common to be called by platform-specific code */ +struct mpsc_port_info *mpsc_device_probe(int index); +struct mpsc_port_info *mpsc_device_remove(int index); + +/* Main MPSC Configuration Register Offsets */ +#define MPSC_MMCRL 0x0000 +#define MPSC_MMCRH 0x0004 +#define MPSC_MPCR 0x0008 +#define MPSC_CHR_1 0x000c +#define MPSC_CHR_2 0x0010 +#define MPSC_CHR_3 0x0014 +#define MPSC_CHR_4 0x0018 +#define MPSC_CHR_5 0x001c +#define MPSC_CHR_6 0x0020 +#define MPSC_CHR_7 0x0024 +#define MPSC_CHR_8 0x0028 +#define MPSC_CHR_9 0x002c +#define MPSC_CHR_10 0x0030 +#define MPSC_CHR_11 0x0034 + +#define MPSC_MPCR_FRZ (1 << 9) +#define MPSC_MPCR_CL_5 0 +#define MPSC_MPCR_CL_6 1 +#define MPSC_MPCR_CL_7 2 +#define MPSC_MPCR_CL_8 3 +#define MPSC_MPCR_SBL_1 0 +#define MPSC_MPCR_SBL_2 1 + +#define MPSC_CHR_2_TEV (1<<1) +#define MPSC_CHR_2_TA (1<<7) +#define MPSC_CHR_2_TTCS (1<<9) +#define MPSC_CHR_2_REV (1<<17) +#define MPSC_CHR_2_RA (1<<23) +#define MPSC_CHR_2_CRD (1<<25) +#define MPSC_CHR_2_EH (1<<31) +#define MPSC_CHR_2_PAR_ODD 0 +#define MPSC_CHR_2_PAR_SPACE 1 +#define MPSC_CHR_2_PAR_EVEN 2 +#define MPSC_CHR_2_PAR_MARK 3 + +/* MPSC Signal Routing */ +#define MPSC_MRR 0x0000 +#define MPSC_RCRR 0x0004 +#define MPSC_TCRR 0x0008 + +/* Serial DMA Controller Interface Registers */ +#define SDMA_SDC 0x0000 +#define SDMA_SDCM 0x0008 +#define SDMA_RX_DESC 0x0800 +#define SDMA_RX_BUF_PTR 0x0808 +#define SDMA_SCRDP 0x0810 +#define SDMA_TX_DESC 0x0c00 +#define SDMA_SCTDP 0x0c10 +#define SDMA_SFTDP 0x0c14 + +#define SDMA_DESC_CMDSTAT_PE (1<<0) +#define SDMA_DESC_CMDSTAT_CDL (1<<1) +#define SDMA_DESC_CMDSTAT_FR (1<<3) +#define SDMA_DESC_CMDSTAT_OR (1<<6) +#define SDMA_DESC_CMDSTAT_BR (1<<9) +#define SDMA_DESC_CMDSTAT_MI (1<<10) +#define SDMA_DESC_CMDSTAT_A (1<<11) +#define SDMA_DESC_CMDSTAT_AM (1<<12) +#define SDMA_DESC_CMDSTAT_CT (1<<13) +#define SDMA_DESC_CMDSTAT_C (1<<14) +#define SDMA_DESC_CMDSTAT_ES (1<<15) +#define SDMA_DESC_CMDSTAT_L (1<<16) +#define SDMA_DESC_CMDSTAT_F (1<<17) +#define SDMA_DESC_CMDSTAT_P (1<<18) +#define SDMA_DESC_CMDSTAT_EI (1<<23) +#define SDMA_DESC_CMDSTAT_O (1<<31) + +#define SDMA_DESC_DFLT (SDMA_DESC_CMDSTAT_O \ + | SDMA_DESC_CMDSTAT_EI) + +#define SDMA_SDC_RFT (1<<0) +#define SDMA_SDC_SFM (1<<1) +#define SDMA_SDC_BLMR (1<<6) +#define SDMA_SDC_BLMT (1<<7) +#define SDMA_SDC_POVR (1<<8) +#define SDMA_SDC_RIFB (1<<9) + +#define SDMA_SDCM_ERD (1<<7) +#define SDMA_SDCM_AR (1<<15) +#define SDMA_SDCM_STD (1<<16) +#define SDMA_SDCM_TXD (1<<23) +#define SDMA_SDCM_AT (1<<31) + +#define SDMA_0_CAUSE_RXBUF (1<<0) +#define SDMA_0_CAUSE_RXERR (1<<1) +#define SDMA_0_CAUSE_TXBUF (1<<2) +#define SDMA_0_CAUSE_TXEND (1<<3) +#define SDMA_1_CAUSE_RXBUF (1<<8) +#define SDMA_1_CAUSE_RXERR (1<<9) +#define SDMA_1_CAUSE_TXBUF (1<<10) +#define SDMA_1_CAUSE_TXEND (1<<11) + +#define SDMA_CAUSE_RX_MASK (SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR \ + | SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR) +#define SDMA_CAUSE_TX_MASK (SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND \ + | SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND) + +/* SDMA Interrupt registers */ +#define SDMA_INTR_CAUSE 0x0000 +#define SDMA_INTR_MASK 0x0080 + +/* Baud Rate Generator Interface Registers */ +#define BRG_BCR 0x0000 +#define BRG_BTR 0x0004 + +/* + * Define how this driver is known to the outside (we've been assigned a + * range on the "Low-density serial ports" major). + */ +#define MPSC_MAJOR 204 +#define MPSC_MINOR_START 44 +#define MPSC_DRIVER_NAME "MPSC" +#define MPSC_DEV_NAME "ttyMM" +#define MPSC_VERSION "1.00" + +static struct mpsc_port_info mpsc_ports[MPSC_NUM_CTLRS]; +static struct mpsc_shared_regs mpsc_shared_regs; +static struct uart_driver mpsc_reg; + +static void mpsc_start_rx(struct mpsc_port_info *pi); +static void mpsc_free_ring_mem(struct mpsc_port_info *pi); +static void mpsc_release_port(struct uart_port *port); +/* + ****************************************************************************** + * + * Baud Rate Generator Routines (BRG) + * + ****************************************************************************** + */ +static void mpsc_brg_init(struct mpsc_port_info *pi, u32 clk_src) +{ + u32 v; + + v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); + v = (v & ~(0xf << 18)) | ((clk_src & 0xf) << 18); + + if (pi->brg_can_tune) + v &= ~(1 << 25); + + if (pi->mirror_regs) + pi->BRG_BCR_m = v; + writel(v, pi->brg_base + BRG_BCR); + + writel(readl(pi->brg_base + BRG_BTR) & 0xffff0000, + pi->brg_base + BRG_BTR); +} + +static void mpsc_brg_enable(struct mpsc_port_info *pi) +{ + u32 v; + + v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); + v |= (1 << 16); + + if (pi->mirror_regs) + pi->BRG_BCR_m = v; + writel(v, pi->brg_base + BRG_BCR); +} + +static void mpsc_brg_disable(struct mpsc_port_info *pi) +{ + u32 v; + + v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); + v &= ~(1 << 16); + + if (pi->mirror_regs) + pi->BRG_BCR_m = v; + writel(v, pi->brg_base + BRG_BCR); +} + +/* + * To set the baud, we adjust the CDV field in the BRG_BCR reg. + * From manual: Baud = clk / ((CDV+1)*2) ==> CDV = (clk / (baud*2)) - 1. + * However, the input clock is divided by 16 in the MPSC b/c of how + * 'MPSC_MMCRH' was set up so we have to divide the 'clk' used in our + * calculation by 16 to account for that. So the real calculation + * that accounts for the way the mpsc is set up is: + * CDV = (clk / (baud*2*16)) - 1 ==> CDV = (clk / (baud << 5)) - 1. + */ +static void mpsc_set_baudrate(struct mpsc_port_info *pi, u32 baud) +{ + u32 cdv = (pi->port.uartclk / (baud << 5)) - 1; + u32 v; + + mpsc_brg_disable(pi); + v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); + v = (v & 0xffff0000) | (cdv & 0xffff); + + if (pi->mirror_regs) + pi->BRG_BCR_m = v; + writel(v, pi->brg_base + BRG_BCR); + mpsc_brg_enable(pi); +} + +/* + ****************************************************************************** + * + * Serial DMA Routines (SDMA) + * + ****************************************************************************** + */ + +static void mpsc_sdma_burstsize(struct mpsc_port_info *pi, u32 burst_size) +{ + u32 v; + + pr_debug("mpsc_sdma_burstsize[%d]: burst_size: %d\n", + pi->port.line, burst_size); + + burst_size >>= 3; /* Divide by 8 b/c reg values are 8-byte chunks */ + + if (burst_size < 2) + v = 0x0; /* 1 64-bit word */ + else if (burst_size < 4) + v = 0x1; /* 2 64-bit words */ + else if (burst_size < 8) + v = 0x2; /* 4 64-bit words */ + else + v = 0x3; /* 8 64-bit words */ + + writel((readl(pi->sdma_base + SDMA_SDC) & (0x3 << 12)) | (v << 12), + pi->sdma_base + SDMA_SDC); +} + +static void mpsc_sdma_init(struct mpsc_port_info *pi, u32 burst_size) +{ + pr_debug("mpsc_sdma_init[%d]: burst_size: %d\n", pi->port.line, + burst_size); + + writel((readl(pi->sdma_base + SDMA_SDC) & 0x3ff) | 0x03f, + pi->sdma_base + SDMA_SDC); + mpsc_sdma_burstsize(pi, burst_size); +} + +static u32 mpsc_sdma_intr_mask(struct mpsc_port_info *pi, u32 mask) +{ + u32 old, v; + + pr_debug("mpsc_sdma_intr_mask[%d]: mask: 0x%x\n", pi->port.line, mask); + + old = v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m : + readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); + + mask &= 0xf; + if (pi->port.line) + mask <<= 8; + v &= ~mask; + + if (pi->mirror_regs) + pi->shared_regs->SDMA_INTR_MASK_m = v; + writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); + + if (pi->port.line) + old >>= 8; + return old & 0xf; +} + +static void mpsc_sdma_intr_unmask(struct mpsc_port_info *pi, u32 mask) +{ + u32 v; + + pr_debug("mpsc_sdma_intr_unmask[%d]: mask: 0x%x\n", pi->port.line,mask); + + v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m + : readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); + + mask &= 0xf; + if (pi->port.line) + mask <<= 8; + v |= mask; + + if (pi->mirror_regs) + pi->shared_regs->SDMA_INTR_MASK_m = v; + writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); +} + +static void mpsc_sdma_intr_ack(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_sdma_intr_ack[%d]: Acknowledging IRQ\n", pi->port.line); + + if (pi->mirror_regs) + pi->shared_regs->SDMA_INTR_CAUSE_m = 0; + writeb(0x00, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE + + pi->port.line); +} + +static void mpsc_sdma_set_rx_ring(struct mpsc_port_info *pi, + struct mpsc_rx_desc *rxre_p) +{ + pr_debug("mpsc_sdma_set_rx_ring[%d]: rxre_p: 0x%x\n", + pi->port.line, (u32)rxre_p); + + writel((u32)rxre_p, pi->sdma_base + SDMA_SCRDP); +} + +static void mpsc_sdma_set_tx_ring(struct mpsc_port_info *pi, + struct mpsc_tx_desc *txre_p) +{ + writel((u32)txre_p, pi->sdma_base + SDMA_SFTDP); + writel((u32)txre_p, pi->sdma_base + SDMA_SCTDP); +} + +static void mpsc_sdma_cmd(struct mpsc_port_info *pi, u32 val) +{ + u32 v; + + v = readl(pi->sdma_base + SDMA_SDCM); + if (val) + v |= val; + else + v = 0; + wmb(); + writel(v, pi->sdma_base + SDMA_SDCM); + wmb(); +} + +static uint mpsc_sdma_tx_active(struct mpsc_port_info *pi) +{ + return readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_TXD; +} + +static void mpsc_sdma_start_tx(struct mpsc_port_info *pi) +{ + struct mpsc_tx_desc *txre, *txre_p; + + /* If tx isn't running & there's a desc ready to go, start it */ + if (!mpsc_sdma_tx_active(pi)) { + txre = (struct mpsc_tx_desc *)(pi->txr + + (pi->txr_tail * MPSC_TXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE, + DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)txre, + (ulong)txre + MPSC_TXRE_SIZE); +#endif + + if (be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O) { + txre_p = (struct mpsc_tx_desc *) + (pi->txr_p + (pi->txr_tail * MPSC_TXRE_SIZE)); + + mpsc_sdma_set_tx_ring(pi, txre_p); + mpsc_sdma_cmd(pi, SDMA_SDCM_STD | SDMA_SDCM_TXD); + } + } +} + +static void mpsc_sdma_stop(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_sdma_stop[%d]: Stopping SDMA\n", pi->port.line); + + /* Abort any SDMA transfers */ + mpsc_sdma_cmd(pi, 0); + mpsc_sdma_cmd(pi, SDMA_SDCM_AR | SDMA_SDCM_AT); + + /* Clear the SDMA current and first TX and RX pointers */ + mpsc_sdma_set_tx_ring(pi, NULL); + mpsc_sdma_set_rx_ring(pi, NULL); + + /* Disable interrupts */ + mpsc_sdma_intr_mask(pi, 0xf); + mpsc_sdma_intr_ack(pi); +} + +/* + ****************************************************************************** + * + * Multi-Protocol Serial Controller Routines (MPSC) + * + ****************************************************************************** + */ + +static void mpsc_hw_init(struct mpsc_port_info *pi) +{ + u32 v; + + pr_debug("mpsc_hw_init[%d]: Initializing hardware\n", pi->port.line); + + /* Set up clock routing */ + if (pi->mirror_regs) { + v = pi->shared_regs->MPSC_MRR_m; + v &= ~0x1c7; + pi->shared_regs->MPSC_MRR_m = v; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR); + + v = pi->shared_regs->MPSC_RCRR_m; + v = (v & ~0xf0f) | 0x100; + pi->shared_regs->MPSC_RCRR_m = v; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR); + + v = pi->shared_regs->MPSC_TCRR_m; + v = (v & ~0xf0f) | 0x100; + pi->shared_regs->MPSC_TCRR_m = v; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR); + } else { + v = readl(pi->shared_regs->mpsc_routing_base + MPSC_MRR); + v &= ~0x1c7; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR); + + v = readl(pi->shared_regs->mpsc_routing_base + MPSC_RCRR); + v = (v & ~0xf0f) | 0x100; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR); + + v = readl(pi->shared_regs->mpsc_routing_base + MPSC_TCRR); + v = (v & ~0xf0f) | 0x100; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR); + } + + /* Put MPSC in UART mode & enabel Tx/Rx egines */ + writel(0x000004c4, pi->mpsc_base + MPSC_MMCRL); + + /* No preamble, 16x divider, low-latency, */ + writel(0x04400400, pi->mpsc_base + MPSC_MMCRH); + mpsc_set_baudrate(pi, pi->default_baud); + + if (pi->mirror_regs) { + pi->MPSC_CHR_1_m = 0; + pi->MPSC_CHR_2_m = 0; + } + writel(0, pi->mpsc_base + MPSC_CHR_1); + writel(0, pi->mpsc_base + MPSC_CHR_2); + writel(pi->mpsc_max_idle, pi->mpsc_base + MPSC_CHR_3); + writel(0, pi->mpsc_base + MPSC_CHR_4); + writel(0, pi->mpsc_base + MPSC_CHR_5); + writel(0, pi->mpsc_base + MPSC_CHR_6); + writel(0, pi->mpsc_base + MPSC_CHR_7); + writel(0, pi->mpsc_base + MPSC_CHR_8); + writel(0, pi->mpsc_base + MPSC_CHR_9); + writel(0, pi->mpsc_base + MPSC_CHR_10); +} + +static void mpsc_enter_hunt(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_enter_hunt[%d]: Hunting...\n", pi->port.line); + + if (pi->mirror_regs) { + writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_EH, + pi->mpsc_base + MPSC_CHR_2); + /* Erratum prevents reading CHR_2 so just delay for a while */ + udelay(100); + } else { + writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_EH, + pi->mpsc_base + MPSC_CHR_2); + + while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_EH) + udelay(10); + } +} + +static void mpsc_freeze(struct mpsc_port_info *pi) +{ + u32 v; + + pr_debug("mpsc_freeze[%d]: Freezing\n", pi->port.line); + + v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : + readl(pi->mpsc_base + MPSC_MPCR); + v |= MPSC_MPCR_FRZ; + + if (pi->mirror_regs) + pi->MPSC_MPCR_m = v; + writel(v, pi->mpsc_base + MPSC_MPCR); +} + +static void mpsc_unfreeze(struct mpsc_port_info *pi) +{ + u32 v; + + v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : + readl(pi->mpsc_base + MPSC_MPCR); + v &= ~MPSC_MPCR_FRZ; + + if (pi->mirror_regs) + pi->MPSC_MPCR_m = v; + writel(v, pi->mpsc_base + MPSC_MPCR); + + pr_debug("mpsc_unfreeze[%d]: Unfrozen\n", pi->port.line); +} + +static void mpsc_set_char_length(struct mpsc_port_info *pi, u32 len) +{ + u32 v; + + pr_debug("mpsc_set_char_length[%d]: char len: %d\n", pi->port.line,len); + + v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : + readl(pi->mpsc_base + MPSC_MPCR); + v = (v & ~(0x3 << 12)) | ((len & 0x3) << 12); + + if (pi->mirror_regs) + pi->MPSC_MPCR_m = v; + writel(v, pi->mpsc_base + MPSC_MPCR); +} + +static void mpsc_set_stop_bit_length(struct mpsc_port_info *pi, u32 len) +{ + u32 v; + + pr_debug("mpsc_set_stop_bit_length[%d]: stop bits: %d\n", + pi->port.line, len); + + v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : + readl(pi->mpsc_base + MPSC_MPCR); + + v = (v & ~(1 << 14)) | ((len & 0x1) << 14); + + if (pi->mirror_regs) + pi->MPSC_MPCR_m = v; + writel(v, pi->mpsc_base + MPSC_MPCR); +} + +static void mpsc_set_parity(struct mpsc_port_info *pi, u32 p) +{ + u32 v; + + pr_debug("mpsc_set_parity[%d]: parity bits: 0x%x\n", pi->port.line, p); + + v = (pi->mirror_regs) ? pi->MPSC_CHR_2_m : + readl(pi->mpsc_base + MPSC_CHR_2); + + p &= 0x3; + v = (v & ~0xc000c) | (p << 18) | (p << 2); + + if (pi->mirror_regs) + pi->MPSC_CHR_2_m = v; + writel(v, pi->mpsc_base + MPSC_CHR_2); +} + +/* + ****************************************************************************** + * + * Driver Init Routines + * + ****************************************************************************** + */ + +static void mpsc_init_hw(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_init_hw[%d]: Initializing\n", pi->port.line); + + mpsc_brg_init(pi, pi->brg_clk_src); + mpsc_brg_enable(pi); + mpsc_sdma_init(pi, dma_get_cache_alignment()); /* burst a cacheline */ + mpsc_sdma_stop(pi); + mpsc_hw_init(pi); +} + +static int mpsc_alloc_ring_mem(struct mpsc_port_info *pi) +{ + int rc = 0; + + pr_debug("mpsc_alloc_ring_mem[%d]: Allocating ring mem\n", + pi->port.line); + + if (!pi->dma_region) { + if (!dma_supported(pi->port.dev, 0xffffffff)) { + printk(KERN_ERR "MPSC: Inadequate DMA support\n"); + rc = -ENXIO; + } else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev, + MPSC_DMA_ALLOC_SIZE, + &pi->dma_region_p, GFP_KERNEL)) + == NULL) { + printk(KERN_ERR "MPSC: Can't alloc Desc region\n"); + rc = -ENOMEM; + } + } + + return rc; +} + +static void mpsc_free_ring_mem(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line); + + if (pi->dma_region) { + dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE, + pi->dma_region, pi->dma_region_p); + pi->dma_region = NULL; + pi->dma_region_p = (dma_addr_t)NULL; + } +} + +static void mpsc_init_rings(struct mpsc_port_info *pi) +{ + struct mpsc_rx_desc *rxre; + struct mpsc_tx_desc *txre; + dma_addr_t dp, dp_p; + u8 *bp, *bp_p; + int i; + + pr_debug("mpsc_init_rings[%d]: Initializing rings\n", pi->port.line); + + BUG_ON(pi->dma_region == NULL); + + memset(pi->dma_region, 0, MPSC_DMA_ALLOC_SIZE); + + /* + * Descriptors & buffers are multiples of cacheline size and must be + * cacheline aligned. + */ + dp = ALIGN((u32)pi->dma_region, dma_get_cache_alignment()); + dp_p = ALIGN((u32)pi->dma_region_p, dma_get_cache_alignment()); + + /* + * Partition dma region into rx ring descriptor, rx buffers, + * tx ring descriptors, and tx buffers. + */ + pi->rxr = dp; + pi->rxr_p = dp_p; + dp += MPSC_RXR_SIZE; + dp_p += MPSC_RXR_SIZE; + + pi->rxb = (u8 *)dp; + pi->rxb_p = (u8 *)dp_p; + dp += MPSC_RXB_SIZE; + dp_p += MPSC_RXB_SIZE; + + pi->rxr_posn = 0; + + pi->txr = dp; + pi->txr_p = dp_p; + dp += MPSC_TXR_SIZE; + dp_p += MPSC_TXR_SIZE; + + pi->txb = (u8 *)dp; + pi->txb_p = (u8 *)dp_p; + + pi->txr_head = 0; + pi->txr_tail = 0; + + /* Init rx ring descriptors */ + dp = pi->rxr; + dp_p = pi->rxr_p; + bp = pi->rxb; + bp_p = pi->rxb_p; + + for (i = 0; i < MPSC_RXR_ENTRIES; i++) { + rxre = (struct mpsc_rx_desc *)dp; + + rxre->bufsize = cpu_to_be16(MPSC_RXBE_SIZE); + rxre->bytecnt = cpu_to_be16(0); + rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O + | SDMA_DESC_CMDSTAT_EI | SDMA_DESC_CMDSTAT_F + | SDMA_DESC_CMDSTAT_L); + rxre->link = cpu_to_be32(dp_p + MPSC_RXRE_SIZE); + rxre->buf_ptr = cpu_to_be32(bp_p); + + dp += MPSC_RXRE_SIZE; + dp_p += MPSC_RXRE_SIZE; + bp += MPSC_RXBE_SIZE; + bp_p += MPSC_RXBE_SIZE; + } + rxre->link = cpu_to_be32(pi->rxr_p); /* Wrap last back to first */ + + /* Init tx ring descriptors */ + dp = pi->txr; + dp_p = pi->txr_p; + bp = pi->txb; + bp_p = pi->txb_p; + + for (i = 0; i < MPSC_TXR_ENTRIES; i++) { + txre = (struct mpsc_tx_desc *)dp; + + txre->link = cpu_to_be32(dp_p + MPSC_TXRE_SIZE); + txre->buf_ptr = cpu_to_be32(bp_p); + + dp += MPSC_TXRE_SIZE; + dp_p += MPSC_TXRE_SIZE; + bp += MPSC_TXBE_SIZE; + bp_p += MPSC_TXBE_SIZE; + } + txre->link = cpu_to_be32(pi->txr_p); /* Wrap last back to first */ + + dma_cache_sync(pi->port.dev, (void *)pi->dma_region, + MPSC_DMA_ALLOC_SIZE, DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)pi->dma_region, + (ulong)pi->dma_region + + MPSC_DMA_ALLOC_SIZE); +#endif + + return; +} + +static void mpsc_uninit_rings(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_uninit_rings[%d]: Uninitializing rings\n",pi->port.line); + + BUG_ON(pi->dma_region == NULL); + + pi->rxr = 0; + pi->rxr_p = 0; + pi->rxb = NULL; + pi->rxb_p = NULL; + pi->rxr_posn = 0; + + pi->txr = 0; + pi->txr_p = 0; + pi->txb = NULL; + pi->txb_p = NULL; + pi->txr_head = 0; + pi->txr_tail = 0; +} + +static int mpsc_make_ready(struct mpsc_port_info *pi) +{ + int rc; + + pr_debug("mpsc_make_ready[%d]: Making cltr ready\n", pi->port.line); + + if (!pi->ready) { + mpsc_init_hw(pi); + if ((rc = mpsc_alloc_ring_mem(pi))) + return rc; + mpsc_init_rings(pi); + pi->ready = 1; + } + + return 0; +} + +#ifdef CONFIG_CONSOLE_POLL +static int serial_polled; +#endif + +/* + ****************************************************************************** + * + * Interrupt Handling Routines + * + ****************************************************************************** + */ + +static int mpsc_rx_intr(struct mpsc_port_info *pi) +{ + struct mpsc_rx_desc *rxre; + struct tty_struct *tty = pi->port.state->port.tty; + u32 cmdstat, bytes_in, i; + int rc = 0; + u8 *bp; + char flag = TTY_NORMAL; + + pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line); + + rxre = (struct mpsc_rx_desc *)(pi->rxr + (pi->rxr_posn*MPSC_RXRE_SIZE)); + + dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE, + DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + + /* + * Loop through Rx descriptors handling ones that have been completed. + */ + while (!((cmdstat = be32_to_cpu(rxre->cmdstat)) + & SDMA_DESC_CMDSTAT_O)) { + bytes_in = be16_to_cpu(rxre->bytecnt); +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return 0; + } +#endif + /* Following use of tty struct directly is deprecated */ + if (unlikely(tty_buffer_request_room(tty, bytes_in) + < bytes_in)) { + if (tty->low_latency) + tty_flip_buffer_push(tty); + /* + * If this failed then we will throw away the bytes + * but must do so to clear interrupts. + */ + } + + bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE); + dma_cache_sync(pi->port.dev, (void *)bp, MPSC_RXBE_SIZE, + DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)bp, + (ulong)bp + MPSC_RXBE_SIZE); +#endif + + /* + * Other than for parity error, the manual provides little + * info on what data will be in a frame flagged by any of + * these errors. For parity error, it is the last byte in + * the buffer that had the error. As for the rest, I guess + * we'll assume there is no data in the buffer. + * If there is...it gets lost. + */ + if (unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR + | SDMA_DESC_CMDSTAT_FR + | SDMA_DESC_CMDSTAT_OR))) { + + pi->port.icount.rx++; + + if (cmdstat & SDMA_DESC_CMDSTAT_BR) { /* Break */ + pi->port.icount.brk++; + + if (uart_handle_break(&pi->port)) + goto next_frame; + } else if (cmdstat & SDMA_DESC_CMDSTAT_FR) { + pi->port.icount.frame++; + } else if (cmdstat & SDMA_DESC_CMDSTAT_OR) { + pi->port.icount.overrun++; + } + + cmdstat &= pi->port.read_status_mask; + + if (cmdstat & SDMA_DESC_CMDSTAT_BR) + flag = TTY_BREAK; + else if (cmdstat & SDMA_DESC_CMDSTAT_FR) + flag = TTY_FRAME; + else if (cmdstat & SDMA_DESC_CMDSTAT_OR) + flag = TTY_OVERRUN; + else if (cmdstat & SDMA_DESC_CMDSTAT_PE) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(&pi->port, *bp)) { + bp++; + bytes_in--; +#ifdef CONFIG_CONSOLE_POLL + if (unlikely(serial_polled)) { + serial_polled = 0; + return 0; + } +#endif + goto next_frame; + } + + if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR + | SDMA_DESC_CMDSTAT_FR + | SDMA_DESC_CMDSTAT_OR))) + && !(cmdstat & pi->port.ignore_status_mask)) { + tty_insert_flip_char(tty, *bp, flag); + } else { + for (i=0; iport.icount.rx += bytes_in; + } + +next_frame: + rxre->bytecnt = cpu_to_be16(0); + wmb(); + rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O + | SDMA_DESC_CMDSTAT_EI | SDMA_DESC_CMDSTAT_F + | SDMA_DESC_CMDSTAT_L); + wmb(); + dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE, + DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + + /* Advance to next descriptor */ + pi->rxr_posn = (pi->rxr_posn + 1) & (MPSC_RXR_ENTRIES - 1); + rxre = (struct mpsc_rx_desc *) + (pi->rxr + (pi->rxr_posn * MPSC_RXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE, + DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + rc = 1; + } + + /* Restart rx engine, if its stopped */ + if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0) + mpsc_start_rx(pi); + + tty_flip_buffer_push(tty); + return rc; +} + +static void mpsc_setup_tx_desc(struct mpsc_port_info *pi, u32 count, u32 intr) +{ + struct mpsc_tx_desc *txre; + + txre = (struct mpsc_tx_desc *)(pi->txr + + (pi->txr_head * MPSC_TXRE_SIZE)); + + txre->bytecnt = cpu_to_be16(count); + txre->shadow = txre->bytecnt; + wmb(); /* ensure cmdstat is last field updated */ + txre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | SDMA_DESC_CMDSTAT_F + | SDMA_DESC_CMDSTAT_L + | ((intr) ? SDMA_DESC_CMDSTAT_EI : 0)); + wmb(); + dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE, + DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)txre, + (ulong)txre + MPSC_TXRE_SIZE); +#endif +} + +static void mpsc_copy_tx_data(struct mpsc_port_info *pi) +{ + struct circ_buf *xmit = &pi->port.state->xmit; + u8 *bp; + u32 i; + + /* Make sure the desc ring isn't full */ + while (CIRC_CNT(pi->txr_head, pi->txr_tail, MPSC_TXR_ENTRIES) + < (MPSC_TXR_ENTRIES - 1)) { + if (pi->port.x_char) { + /* + * Ideally, we should use the TCS field in + * CHR_1 to put the x_char out immediately but + * errata prevents us from being able to read + * CHR_2 to know that its safe to write to + * CHR_1. Instead, just put it in-band with + * all the other Tx data. + */ + bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); + *bp = pi->port.x_char; + pi->port.x_char = 0; + i = 1; + } else if (!uart_circ_empty(xmit) + && !uart_tx_stopped(&pi->port)) { + i = min((u32)MPSC_TXBE_SIZE, + (u32)uart_circ_chars_pending(xmit)); + i = min(i, (u32)CIRC_CNT_TO_END(xmit->head, xmit->tail, + UART_XMIT_SIZE)); + bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); + memcpy(bp, &xmit->buf[xmit->tail], i); + xmit->tail = (xmit->tail + i) & (UART_XMIT_SIZE - 1); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&pi->port); + } else { /* All tx data copied into ring bufs */ + return; + } + + dma_cache_sync(pi->port.dev, (void *)bp, MPSC_TXBE_SIZE, + DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)bp, + (ulong)bp + MPSC_TXBE_SIZE); +#endif + mpsc_setup_tx_desc(pi, i, 1); + + /* Advance to next descriptor */ + pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1); + } +} + +static int mpsc_tx_intr(struct mpsc_port_info *pi) +{ + struct mpsc_tx_desc *txre; + int rc = 0; + unsigned long iflags; + + spin_lock_irqsave(&pi->tx_lock, iflags); + + if (!mpsc_sdma_tx_active(pi)) { + txre = (struct mpsc_tx_desc *)(pi->txr + + (pi->txr_tail * MPSC_TXRE_SIZE)); + + dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE, + DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)txre, + (ulong)txre + MPSC_TXRE_SIZE); +#endif + + while (!(be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O)) { + rc = 1; + pi->port.icount.tx += be16_to_cpu(txre->bytecnt); + pi->txr_tail = (pi->txr_tail+1) & (MPSC_TXR_ENTRIES-1); + + /* If no more data to tx, fall out of loop */ + if (pi->txr_head == pi->txr_tail) + break; + + txre = (struct mpsc_tx_desc *)(pi->txr + + (pi->txr_tail * MPSC_TXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)txre, + MPSC_TXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)txre, + (ulong)txre + MPSC_TXRE_SIZE); +#endif + } + + mpsc_copy_tx_data(pi); + mpsc_sdma_start_tx(pi); /* start next desc if ready */ + } + + spin_unlock_irqrestore(&pi->tx_lock, iflags); + return rc; +} + +/* + * This is the driver's interrupt handler. To avoid a race, we first clear + * the interrupt, then handle any completed Rx/Tx descriptors. When done + * handling those descriptors, we restart the Rx/Tx engines if they're stopped. + */ +static irqreturn_t mpsc_sdma_intr(int irq, void *dev_id) +{ + struct mpsc_port_info *pi = dev_id; + ulong iflags; + int rc = IRQ_NONE; + + pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Received\n",pi->port.line); + + spin_lock_irqsave(&pi->port.lock, iflags); + mpsc_sdma_intr_ack(pi); + if (mpsc_rx_intr(pi)) + rc = IRQ_HANDLED; + if (mpsc_tx_intr(pi)) + rc = IRQ_HANDLED; + spin_unlock_irqrestore(&pi->port.lock, iflags); + + pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Handled\n", pi->port.line); + return rc; +} + +/* + ****************************************************************************** + * + * serial_core.c Interface routines + * + ****************************************************************************** + */ +static uint mpsc_tx_empty(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + ulong iflags; + uint rc; + + spin_lock_irqsave(&pi->port.lock, iflags); + rc = mpsc_sdma_tx_active(pi) ? 0 : TIOCSER_TEMT; + spin_unlock_irqrestore(&pi->port.lock, iflags); + + return rc; +} + +static void mpsc_set_mctrl(struct uart_port *port, uint mctrl) +{ + /* Have no way to set modem control lines AFAICT */ +} + +static uint mpsc_get_mctrl(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 mflags, status; + + status = (pi->mirror_regs) ? pi->MPSC_CHR_10_m + : readl(pi->mpsc_base + MPSC_CHR_10); + + mflags = 0; + if (status & 0x1) + mflags |= TIOCM_CTS; + if (status & 0x2) + mflags |= TIOCM_CAR; + + return mflags | TIOCM_DSR; /* No way to tell if DSR asserted */ +} + +static void mpsc_stop_tx(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + + pr_debug("mpsc_stop_tx[%d]\n", port->line); + + mpsc_freeze(pi); +} + +static void mpsc_start_tx(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + unsigned long iflags; + + spin_lock_irqsave(&pi->tx_lock, iflags); + + mpsc_unfreeze(pi); + mpsc_copy_tx_data(pi); + mpsc_sdma_start_tx(pi); + + spin_unlock_irqrestore(&pi->tx_lock, iflags); + + pr_debug("mpsc_start_tx[%d]\n", port->line); +} + +static void mpsc_start_rx(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_start_rx[%d]: Starting...\n", pi->port.line); + + if (pi->rcv_data) { + mpsc_enter_hunt(pi); + mpsc_sdma_cmd(pi, SDMA_SDCM_ERD); + } +} + +static void mpsc_stop_rx(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + + pr_debug("mpsc_stop_rx[%d]: Stopping...\n", port->line); + + if (pi->mirror_regs) { + writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_RA, + pi->mpsc_base + MPSC_CHR_2); + /* Erratum prevents reading CHR_2 so just delay for a while */ + udelay(100); + } else { + writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_RA, + pi->mpsc_base + MPSC_CHR_2); + + while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_RA) + udelay(10); + } + + mpsc_sdma_cmd(pi, SDMA_SDCM_AR); +} + +static void mpsc_enable_ms(struct uart_port *port) +{ +} + +static void mpsc_break_ctl(struct uart_port *port, int ctl) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + ulong flags; + u32 v; + + v = ctl ? 0x00ff0000 : 0; + + spin_lock_irqsave(&pi->port.lock, flags); + if (pi->mirror_regs) + pi->MPSC_CHR_1_m = v; + writel(v, pi->mpsc_base + MPSC_CHR_1); + spin_unlock_irqrestore(&pi->port.lock, flags); +} + +static int mpsc_startup(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 flag = 0; + int rc; + + pr_debug("mpsc_startup[%d]: Starting up MPSC, irq: %d\n", + port->line, pi->port.irq); + + if ((rc = mpsc_make_ready(pi)) == 0) { + /* Setup IRQ handler */ + mpsc_sdma_intr_ack(pi); + + /* If irq's are shared, need to set flag */ + if (mpsc_ports[0].port.irq == mpsc_ports[1].port.irq) + flag = IRQF_SHARED; + + if (request_irq(pi->port.irq, mpsc_sdma_intr, flag, + "mpsc-sdma", pi)) + printk(KERN_ERR "MPSC: Can't get SDMA IRQ %d\n", + pi->port.irq); + + mpsc_sdma_intr_unmask(pi, 0xf); + mpsc_sdma_set_rx_ring(pi, (struct mpsc_rx_desc *)(pi->rxr_p + + (pi->rxr_posn * MPSC_RXRE_SIZE))); + } + + return rc; +} + +static void mpsc_shutdown(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + + pr_debug("mpsc_shutdown[%d]: Shutting down MPSC\n", port->line); + + mpsc_sdma_stop(pi); + free_irq(pi->port.irq, pi); +} + +static void mpsc_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 baud; + ulong flags; + u32 chr_bits, stop_bits, par; + + pi->c_iflag = termios->c_iflag; + pi->c_cflag = termios->c_cflag; + + switch (termios->c_cflag & CSIZE) { + case CS5: + chr_bits = MPSC_MPCR_CL_5; + break; + case CS6: + chr_bits = MPSC_MPCR_CL_6; + break; + case CS7: + chr_bits = MPSC_MPCR_CL_7; + break; + case CS8: + default: + chr_bits = MPSC_MPCR_CL_8; + break; + } + + if (termios->c_cflag & CSTOPB) + stop_bits = MPSC_MPCR_SBL_2; + else + stop_bits = MPSC_MPCR_SBL_1; + + par = MPSC_CHR_2_PAR_EVEN; + if (termios->c_cflag & PARENB) + if (termios->c_cflag & PARODD) + par = MPSC_CHR_2_PAR_ODD; +#ifdef CMSPAR + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + par = MPSC_CHR_2_PAR_MARK; + else + par = MPSC_CHR_2_PAR_SPACE; + } +#endif + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk); + + spin_lock_irqsave(&pi->port.lock, flags); + + uart_update_timeout(port, termios->c_cflag, baud); + + mpsc_set_char_length(pi, chr_bits); + mpsc_set_stop_bit_length(pi, stop_bits); + mpsc_set_parity(pi, par); + mpsc_set_baudrate(pi, baud); + + /* Characters/events to read */ + pi->port.read_status_mask = SDMA_DESC_CMDSTAT_OR; + + if (termios->c_iflag & INPCK) + pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_PE + | SDMA_DESC_CMDSTAT_FR; + + if (termios->c_iflag & (BRKINT | PARMRK)) + pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_BR; + + /* Characters/events to ignore */ + pi->port.ignore_status_mask = 0; + + if (termios->c_iflag & IGNPAR) + pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_PE + | SDMA_DESC_CMDSTAT_FR; + + if (termios->c_iflag & IGNBRK) { + pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_BR; + + if (termios->c_iflag & IGNPAR) + pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_OR; + } + + if ((termios->c_cflag & CREAD)) { + if (!pi->rcv_data) { + pi->rcv_data = 1; + mpsc_start_rx(pi); + } + } else if (pi->rcv_data) { + mpsc_stop_rx(port); + pi->rcv_data = 0; + } + + spin_unlock_irqrestore(&pi->port.lock, flags); +} + +static const char *mpsc_type(struct uart_port *port) +{ + pr_debug("mpsc_type[%d]: port type: %s\n", port->line,MPSC_DRIVER_NAME); + return MPSC_DRIVER_NAME; +} + +static int mpsc_request_port(struct uart_port *port) +{ + /* Should make chip/platform specific call */ + return 0; +} + +static void mpsc_release_port(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + + if (pi->ready) { + mpsc_uninit_rings(pi); + mpsc_free_ring_mem(pi); + pi->ready = 0; + } +} + +static void mpsc_config_port(struct uart_port *port, int flags) +{ +} + +static int mpsc_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + int rc = 0; + + pr_debug("mpsc_verify_port[%d]: Verifying port data\n", pi->port.line); + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPSC) + rc = -EINVAL; + else if (pi->port.irq != ser->irq) + rc = -EINVAL; + else if (ser->io_type != SERIAL_IO_MEM) + rc = -EINVAL; + else if (pi->port.uartclk / 16 != ser->baud_base) /* Not sure */ + rc = -EINVAL; + else if ((void *)pi->port.mapbase != ser->iomem_base) + rc = -EINVAL; + else if (pi->port.iobase != ser->port) + rc = -EINVAL; + else if (ser->hub6 != 0) + rc = -EINVAL; + + return rc; +} +#ifdef CONFIG_CONSOLE_POLL +/* Serial polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static char poll_buf[2048]; +static int poll_ptr; +static int poll_cnt; +static void mpsc_put_poll_char(struct uart_port *port, + unsigned char c); + +static int mpsc_get_poll_char(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + struct mpsc_rx_desc *rxre; + u32 cmdstat, bytes_in, i; + u8 *bp; + + if (!serial_polled) + serial_polled = 1; + + pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line); + + if (poll_cnt) { + poll_cnt--; + return poll_buf[poll_ptr++]; + } + poll_ptr = 0; + poll_cnt = 0; + + while (poll_cnt == 0) { + rxre = (struct mpsc_rx_desc *)(pi->rxr + + (pi->rxr_posn*MPSC_RXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)rxre, + MPSC_RXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + /* + * Loop through Rx descriptors handling ones that have + * been completed. + */ + while (poll_cnt == 0 && + !((cmdstat = be32_to_cpu(rxre->cmdstat)) & + SDMA_DESC_CMDSTAT_O)){ + bytes_in = be16_to_cpu(rxre->bytecnt); + bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE); + dma_cache_sync(pi->port.dev, (void *) bp, + MPSC_RXBE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)bp, + (ulong)bp + MPSC_RXBE_SIZE); +#endif + if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR | + SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) && + !(cmdstat & pi->port.ignore_status_mask)) { + poll_buf[poll_cnt] = *bp; + poll_cnt++; + } else { + for (i = 0; i < bytes_in; i++) { + poll_buf[poll_cnt] = *bp++; + poll_cnt++; + } + pi->port.icount.rx += bytes_in; + } + rxre->bytecnt = cpu_to_be16(0); + wmb(); + rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | + SDMA_DESC_CMDSTAT_EI | + SDMA_DESC_CMDSTAT_F | + SDMA_DESC_CMDSTAT_L); + wmb(); + dma_cache_sync(pi->port.dev, (void *)rxre, + MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + + /* Advance to next descriptor */ + pi->rxr_posn = (pi->rxr_posn + 1) & + (MPSC_RXR_ENTRIES - 1); + rxre = (struct mpsc_rx_desc *)(pi->rxr + + (pi->rxr_posn * MPSC_RXRE_SIZE)); + dma_cache_sync(pi->port.dev, (void *)rxre, + MPSC_RXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + } + + /* Restart rx engine, if its stopped */ + if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0) + mpsc_start_rx(pi); + } + if (poll_cnt) { + poll_cnt--; + return poll_buf[poll_ptr++]; + } + + return 0; +} + + +static void mpsc_put_poll_char(struct uart_port *port, + unsigned char c) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 data; + + data = readl(pi->mpsc_base + MPSC_MPCR); + writeb(c, pi->mpsc_base + MPSC_CHR_1); + mb(); + data = readl(pi->mpsc_base + MPSC_CHR_2); + data |= MPSC_CHR_2_TTCS; + writel(data, pi->mpsc_base + MPSC_CHR_2); + mb(); + + while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_TTCS); +} +#endif + +static struct uart_ops mpsc_pops = { + .tx_empty = mpsc_tx_empty, + .set_mctrl = mpsc_set_mctrl, + .get_mctrl = mpsc_get_mctrl, + .stop_tx = mpsc_stop_tx, + .start_tx = mpsc_start_tx, + .stop_rx = mpsc_stop_rx, + .enable_ms = mpsc_enable_ms, + .break_ctl = mpsc_break_ctl, + .startup = mpsc_startup, + .shutdown = mpsc_shutdown, + .set_termios = mpsc_set_termios, + .type = mpsc_type, + .release_port = mpsc_release_port, + .request_port = mpsc_request_port, + .config_port = mpsc_config_port, + .verify_port = mpsc_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = mpsc_get_poll_char, + .poll_put_char = mpsc_put_poll_char, +#endif +}; + +/* + ****************************************************************************** + * + * Console Interface Routines + * + ****************************************************************************** + */ + +#ifdef CONFIG_SERIAL_MPSC_CONSOLE +static void mpsc_console_write(struct console *co, const char *s, uint count) +{ + struct mpsc_port_info *pi = &mpsc_ports[co->index]; + u8 *bp, *dp, add_cr = 0; + int i; + unsigned long iflags; + + spin_lock_irqsave(&pi->tx_lock, iflags); + + while (pi->txr_head != pi->txr_tail) { + while (mpsc_sdma_tx_active(pi)) + udelay(100); + mpsc_sdma_intr_ack(pi); + mpsc_tx_intr(pi); + } + + while (mpsc_sdma_tx_active(pi)) + udelay(100); + + while (count > 0) { + bp = dp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); + + for (i = 0; i < MPSC_TXBE_SIZE; i++) { + if (count == 0) + break; + + if (add_cr) { + *(dp++) = '\r'; + add_cr = 0; + } else { + *(dp++) = *s; + + if (*(s++) == '\n') { /* add '\r' after '\n' */ + add_cr = 1; + count++; + } + } + + count--; + } + + dma_cache_sync(pi->port.dev, (void *)bp, MPSC_TXBE_SIZE, + DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)bp, + (ulong)bp + MPSC_TXBE_SIZE); +#endif + mpsc_setup_tx_desc(pi, i, 0); + pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1); + mpsc_sdma_start_tx(pi); + + while (mpsc_sdma_tx_active(pi)) + udelay(100); + + pi->txr_tail = (pi->txr_tail + 1) & (MPSC_TXR_ENTRIES - 1); + } + + spin_unlock_irqrestore(&pi->tx_lock, iflags); +} + +static int __init mpsc_console_setup(struct console *co, char *options) +{ + struct mpsc_port_info *pi; + int baud, bits, parity, flow; + + pr_debug("mpsc_console_setup[%d]: options: %s\n", co->index, options); + + if (co->index >= MPSC_NUM_CTLRS) + co->index = 0; + + pi = &mpsc_ports[co->index]; + + baud = pi->default_baud; + bits = pi->default_bits; + parity = pi->default_parity; + flow = pi->default_flow; + + if (!pi->port.ops) + return -ENODEV; + + spin_lock_init(&pi->port.lock); /* Temporary fix--copied from 8250.c */ + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&pi->port, co, baud, parity, bits, flow); +} + +static struct console mpsc_console = { + .name = MPSC_DEV_NAME, + .write = mpsc_console_write, + .device = uart_console_device, + .setup = mpsc_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &mpsc_reg, +}; + +static int __init mpsc_late_console_init(void) +{ + pr_debug("mpsc_late_console_init: Enter\n"); + + if (!(mpsc_console.flags & CON_ENABLED)) + register_console(&mpsc_console); + return 0; +} + +late_initcall(mpsc_late_console_init); + +#define MPSC_CONSOLE &mpsc_console +#else +#define MPSC_CONSOLE NULL +#endif +/* + ****************************************************************************** + * + * Dummy Platform Driver to extract & map shared register regions + * + ****************************************************************************** + */ +static void mpsc_resource_err(char *s) +{ + printk(KERN_WARNING "MPSC: Platform device resource error in %s\n", s); +} + +static int mpsc_shared_map_regs(struct platform_device *pd) +{ + struct resource *r; + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, + MPSC_ROUTING_BASE_ORDER)) + && request_mem_region(r->start, + MPSC_ROUTING_REG_BLOCK_SIZE, + "mpsc_routing_regs")) { + mpsc_shared_regs.mpsc_routing_base = ioremap(r->start, + MPSC_ROUTING_REG_BLOCK_SIZE); + mpsc_shared_regs.mpsc_routing_base_p = r->start; + } else { + mpsc_resource_err("MPSC routing base"); + return -ENOMEM; + } + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, + MPSC_SDMA_INTR_BASE_ORDER)) + && request_mem_region(r->start, + MPSC_SDMA_INTR_REG_BLOCK_SIZE, + "sdma_intr_regs")) { + mpsc_shared_regs.sdma_intr_base = ioremap(r->start, + MPSC_SDMA_INTR_REG_BLOCK_SIZE); + mpsc_shared_regs.sdma_intr_base_p = r->start; + } else { + iounmap(mpsc_shared_regs.mpsc_routing_base); + release_mem_region(mpsc_shared_regs.mpsc_routing_base_p, + MPSC_ROUTING_REG_BLOCK_SIZE); + mpsc_resource_err("SDMA intr base"); + return -ENOMEM; + } + + return 0; +} + +static void mpsc_shared_unmap_regs(void) +{ + if (!mpsc_shared_regs.mpsc_routing_base) { + iounmap(mpsc_shared_regs.mpsc_routing_base); + release_mem_region(mpsc_shared_regs.mpsc_routing_base_p, + MPSC_ROUTING_REG_BLOCK_SIZE); + } + if (!mpsc_shared_regs.sdma_intr_base) { + iounmap(mpsc_shared_regs.sdma_intr_base); + release_mem_region(mpsc_shared_regs.sdma_intr_base_p, + MPSC_SDMA_INTR_REG_BLOCK_SIZE); + } + + mpsc_shared_regs.mpsc_routing_base = NULL; + mpsc_shared_regs.sdma_intr_base = NULL; + + mpsc_shared_regs.mpsc_routing_base_p = 0; + mpsc_shared_regs.sdma_intr_base_p = 0; +} + +static int mpsc_shared_drv_probe(struct platform_device *dev) +{ + struct mpsc_shared_pdata *pdata; + int rc = -ENODEV; + + if (dev->id == 0) { + if (!(rc = mpsc_shared_map_regs(dev))) { + pdata = (struct mpsc_shared_pdata *) + dev->dev.platform_data; + + mpsc_shared_regs.MPSC_MRR_m = pdata->mrr_val; + mpsc_shared_regs.MPSC_RCRR_m= pdata->rcrr_val; + mpsc_shared_regs.MPSC_TCRR_m= pdata->tcrr_val; + mpsc_shared_regs.SDMA_INTR_CAUSE_m = + pdata->intr_cause_val; + mpsc_shared_regs.SDMA_INTR_MASK_m = + pdata->intr_mask_val; + + rc = 0; + } + } + + return rc; +} + +static int mpsc_shared_drv_remove(struct platform_device *dev) +{ + int rc = -ENODEV; + + if (dev->id == 0) { + mpsc_shared_unmap_regs(); + mpsc_shared_regs.MPSC_MRR_m = 0; + mpsc_shared_regs.MPSC_RCRR_m = 0; + mpsc_shared_regs.MPSC_TCRR_m = 0; + mpsc_shared_regs.SDMA_INTR_CAUSE_m = 0; + mpsc_shared_regs.SDMA_INTR_MASK_m = 0; + rc = 0; + } + + return rc; +} + +static struct platform_driver mpsc_shared_driver = { + .probe = mpsc_shared_drv_probe, + .remove = mpsc_shared_drv_remove, + .driver = { + .name = MPSC_SHARED_NAME, + }, +}; + +/* + ****************************************************************************** + * + * Driver Interface Routines + * + ****************************************************************************** + */ +static struct uart_driver mpsc_reg = { + .owner = THIS_MODULE, + .driver_name = MPSC_DRIVER_NAME, + .dev_name = MPSC_DEV_NAME, + .major = MPSC_MAJOR, + .minor = MPSC_MINOR_START, + .nr = MPSC_NUM_CTLRS, + .cons = MPSC_CONSOLE, +}; + +static int mpsc_drv_map_regs(struct mpsc_port_info *pi, + struct platform_device *pd) +{ + struct resource *r; + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, MPSC_BASE_ORDER)) + && request_mem_region(r->start, MPSC_REG_BLOCK_SIZE, + "mpsc_regs")) { + pi->mpsc_base = ioremap(r->start, MPSC_REG_BLOCK_SIZE); + pi->mpsc_base_p = r->start; + } else { + mpsc_resource_err("MPSC base"); + goto err; + } + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, + MPSC_SDMA_BASE_ORDER)) + && request_mem_region(r->start, + MPSC_SDMA_REG_BLOCK_SIZE, "sdma_regs")) { + pi->sdma_base = ioremap(r->start,MPSC_SDMA_REG_BLOCK_SIZE); + pi->sdma_base_p = r->start; + } else { + mpsc_resource_err("SDMA base"); + if (pi->mpsc_base) { + iounmap(pi->mpsc_base); + pi->mpsc_base = NULL; + } + goto err; + } + + if ((r = platform_get_resource(pd,IORESOURCE_MEM,MPSC_BRG_BASE_ORDER)) + && request_mem_region(r->start, + MPSC_BRG_REG_BLOCK_SIZE, "brg_regs")) { + pi->brg_base = ioremap(r->start, MPSC_BRG_REG_BLOCK_SIZE); + pi->brg_base_p = r->start; + } else { + mpsc_resource_err("BRG base"); + if (pi->mpsc_base) { + iounmap(pi->mpsc_base); + pi->mpsc_base = NULL; + } + if (pi->sdma_base) { + iounmap(pi->sdma_base); + pi->sdma_base = NULL; + } + goto err; + } + return 0; + +err: + return -ENOMEM; +} + +static void mpsc_drv_unmap_regs(struct mpsc_port_info *pi) +{ + if (!pi->mpsc_base) { + iounmap(pi->mpsc_base); + release_mem_region(pi->mpsc_base_p, MPSC_REG_BLOCK_SIZE); + } + if (!pi->sdma_base) { + iounmap(pi->sdma_base); + release_mem_region(pi->sdma_base_p, MPSC_SDMA_REG_BLOCK_SIZE); + } + if (!pi->brg_base) { + iounmap(pi->brg_base); + release_mem_region(pi->brg_base_p, MPSC_BRG_REG_BLOCK_SIZE); + } + + pi->mpsc_base = NULL; + pi->sdma_base = NULL; + pi->brg_base = NULL; + + pi->mpsc_base_p = 0; + pi->sdma_base_p = 0; + pi->brg_base_p = 0; +} + +static void mpsc_drv_get_platform_data(struct mpsc_port_info *pi, + struct platform_device *pd, int num) +{ + struct mpsc_pdata *pdata; + + pdata = (struct mpsc_pdata *)pd->dev.platform_data; + + pi->port.uartclk = pdata->brg_clk_freq; + pi->port.iotype = UPIO_MEM; + pi->port.line = num; + pi->port.type = PORT_MPSC; + pi->port.fifosize = MPSC_TXBE_SIZE; + pi->port.membase = pi->mpsc_base; + pi->port.mapbase = (ulong)pi->mpsc_base; + pi->port.ops = &mpsc_pops; + + pi->mirror_regs = pdata->mirror_regs; + pi->cache_mgmt = pdata->cache_mgmt; + pi->brg_can_tune = pdata->brg_can_tune; + pi->brg_clk_src = pdata->brg_clk_src; + pi->mpsc_max_idle = pdata->max_idle; + pi->default_baud = pdata->default_baud; + pi->default_bits = pdata->default_bits; + pi->default_parity = pdata->default_parity; + pi->default_flow = pdata->default_flow; + + /* Initial values of mirrored regs */ + pi->MPSC_CHR_1_m = pdata->chr_1_val; + pi->MPSC_CHR_2_m = pdata->chr_2_val; + pi->MPSC_CHR_10_m = pdata->chr_10_val; + pi->MPSC_MPCR_m = pdata->mpcr_val; + pi->BRG_BCR_m = pdata->bcr_val; + + pi->shared_regs = &mpsc_shared_regs; + + pi->port.irq = platform_get_irq(pd, 0); +} + +static int mpsc_drv_probe(struct platform_device *dev) +{ + struct mpsc_port_info *pi; + int rc = -ENODEV; + + pr_debug("mpsc_drv_probe: Adding MPSC %d\n", dev->id); + + if (dev->id < MPSC_NUM_CTLRS) { + pi = &mpsc_ports[dev->id]; + + if (!(rc = mpsc_drv_map_regs(pi, dev))) { + mpsc_drv_get_platform_data(pi, dev, dev->id); + pi->port.dev = &dev->dev; + + if (!(rc = mpsc_make_ready(pi))) { + spin_lock_init(&pi->tx_lock); + if (!(rc = uart_add_one_port(&mpsc_reg, + &pi->port))) { + rc = 0; + } else { + mpsc_release_port((struct uart_port *) + pi); + mpsc_drv_unmap_regs(pi); + } + } else { + mpsc_drv_unmap_regs(pi); + } + } + } + + return rc; +} + +static int mpsc_drv_remove(struct platform_device *dev) +{ + pr_debug("mpsc_drv_exit: Removing MPSC %d\n", dev->id); + + if (dev->id < MPSC_NUM_CTLRS) { + uart_remove_one_port(&mpsc_reg, &mpsc_ports[dev->id].port); + mpsc_release_port((struct uart_port *) + &mpsc_ports[dev->id].port); + mpsc_drv_unmap_regs(&mpsc_ports[dev->id]); + return 0; + } else { + return -ENODEV; + } +} + +static struct platform_driver mpsc_driver = { + .probe = mpsc_drv_probe, + .remove = mpsc_drv_remove, + .driver = { + .name = MPSC_CTLR_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init mpsc_drv_init(void) +{ + int rc; + + printk(KERN_INFO "Serial: MPSC driver\n"); + + memset(mpsc_ports, 0, sizeof(mpsc_ports)); + memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs)); + + if (!(rc = uart_register_driver(&mpsc_reg))) { + if (!(rc = platform_driver_register(&mpsc_shared_driver))) { + if ((rc = platform_driver_register(&mpsc_driver))) { + platform_driver_unregister(&mpsc_shared_driver); + uart_unregister_driver(&mpsc_reg); + } + } else { + uart_unregister_driver(&mpsc_reg); + } + } + + return rc; +} + +static void __exit mpsc_drv_exit(void) +{ + platform_driver_unregister(&mpsc_driver); + platform_driver_unregister(&mpsc_shared_driver); + uart_unregister_driver(&mpsc_reg); + memset(mpsc_ports, 0, sizeof(mpsc_ports)); + memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs)); +} + +module_init(mpsc_drv_init); +module_exit(mpsc_drv_exit); + +MODULE_AUTHOR("Mark A. Greer "); +MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver"); +MODULE_VERSION(MPSC_VERSION); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR); +MODULE_ALIAS("platform:" MPSC_CTLR_NAME); diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c new file mode 100644 index 000000000000..b62857bf2fdb --- /dev/null +++ b/drivers/tty/serial/mrst_max3110.c @@ -0,0 +1,919 @@ +/* + * mrst_max3110.c - spi uart protocol driver for Maxim 3110 + * + * Copyright (c) 2008-2010, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +/* + * Note: + * 1. From Max3110 spec, the Rx FIFO has 8 words, while the Tx FIFO only has + * 1 word. If SPI master controller doesn't support sclk frequency change, + * then the char need be sent out one by one with some delay + * + * 2. Currently only RX availabe interrrupt is used, no need for waiting TXE + * interrupt for a low speed UART device + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "mrst_max3110.h" + +#define PR_FMT "mrst_max3110: " + +#define UART_TX_NEEDED 1 +#define CON_TX_NEEDED 2 +#define BIT_IRQ_PENDING 3 + +struct uart_max3110 { + struct uart_port port; + struct spi_device *spi; + char name[24]; + + wait_queue_head_t wq; + struct task_struct *main_thread; + struct task_struct *read_thread; + struct mutex thread_mutex;; + + u32 baud; + u16 cur_conf; + u8 clock; + u8 parity, word_7bits; + u16 irq; + + unsigned long uart_flags; + + /* console related */ + struct circ_buf con_xmit; +}; + +/* global data structure, may need be removed */ +static struct uart_max3110 *pmax; + +static void receive_chars(struct uart_max3110 *max, + unsigned char *str, int len); +static int max3110_read_multi(struct uart_max3110 *max, u8 *buf); +static void max3110_con_receive(struct uart_max3110 *max); + +static int max3110_write_then_read(struct uart_max3110 *max, + const void *txbuf, void *rxbuf, unsigned len, int always_fast) +{ + struct spi_device *spi = max->spi; + struct spi_message message; + struct spi_transfer x; + int ret; + + spi_message_init(&message); + memset(&x, 0, sizeof x); + x.len = len; + x.tx_buf = txbuf; + x.rx_buf = rxbuf; + spi_message_add_tail(&x, &message); + + if (always_fast) + x.speed_hz = spi->max_speed_hz; + else if (max->baud) + x.speed_hz = max->baud; + + /* Do the i/o */ + ret = spi_sync(spi, &message); + return ret; +} + +/* Write a 16b word to the device */ +static int max3110_out(struct uart_max3110 *max, const u16 out) +{ + void *buf; + u16 *obuf, *ibuf; + u8 ch; + int ret; + + buf = kzalloc(8, GFP_KERNEL | GFP_DMA); + if (!buf) + return -ENOMEM; + + obuf = buf; + ibuf = buf + 4; + *obuf = out; + ret = max3110_write_then_read(max, obuf, ibuf, 2, 1); + if (ret) { + pr_warning(PR_FMT "%s(): get err msg %d when sending 0x%x\n", + __func__, ret, out); + goto exit; + } + + /* If some valid data is read back */ + if (*ibuf & MAX3110_READ_DATA_AVAILABLE) { + ch = *ibuf & 0xff; + receive_chars(max, &ch, 1); + } + +exit: + kfree(buf); + return ret; +} + +/* + * This is usually used to read data from SPIC RX FIFO, which doesn't + * need any delay like flushing character out. + * + * Return how many valide bytes are read back + */ +static int max3110_read_multi(struct uart_max3110 *max, u8 *rxbuf) +{ + void *buf; + u16 *obuf, *ibuf; + u8 *pbuf, valid_str[M3110_RX_FIFO_DEPTH]; + int i, j, blen; + + blen = M3110_RX_FIFO_DEPTH * sizeof(u16); + buf = kzalloc(blen * 2, GFP_KERNEL | GFP_DMA); + if (!buf) { + pr_warning(PR_FMT "%s(): fail to alloc dma buffer\n", __func__); + return 0; + } + + /* tx/rx always have the same length */ + obuf = buf; + ibuf = buf + blen; + + if (max3110_write_then_read(max, obuf, ibuf, blen, 1)) { + kfree(buf); + return 0; + } + + /* If caller doesn't provide a buffer, then handle received char */ + pbuf = rxbuf ? rxbuf : valid_str; + + for (i = 0, j = 0; i < M3110_RX_FIFO_DEPTH; i++) { + if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE) + pbuf[j++] = ibuf[i] & 0xff; + } + + if (j && (pbuf == valid_str)) + receive_chars(max, valid_str, j); + + kfree(buf); + return j; +} + +static void serial_m3110_con_putchar(struct uart_port *port, int ch) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + struct circ_buf *xmit = &max->con_xmit; + + if (uart_circ_chars_free(xmit)) { + xmit->buf[xmit->head] = (char)ch; + xmit->head = (xmit->head + 1) & (PAGE_SIZE - 1); + } +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void serial_m3110_con_write(struct console *co, + const char *s, unsigned int count) +{ + if (!pmax) + return; + + uart_console_write(&pmax->port, s, count, serial_m3110_con_putchar); + + if (!test_and_set_bit(CON_TX_NEEDED, &pmax->uart_flags)) + wake_up_process(pmax->main_thread); +} + +static int __init +serial_m3110_con_setup(struct console *co, char *options) +{ + struct uart_max3110 *max = pmax; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + pr_info(PR_FMT "setting up console\n"); + + if (co->index == -1) + co->index = 0; + + if (!max) { + pr_err(PR_FMT "pmax is NULL, return"); + return -ENODEV; + } + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&max->port, co, baud, parity, bits, flow); +} + +static struct tty_driver *serial_m3110_con_device(struct console *co, + int *index) +{ + struct uart_driver *p = co->data; + *index = co->index; + return p->tty_driver; +} + +static struct uart_driver serial_m3110_reg; +static struct console serial_m3110_console = { + .name = "ttyS", + .write = serial_m3110_con_write, + .device = serial_m3110_con_device, + .setup = serial_m3110_con_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_m3110_reg, +}; + +static unsigned int serial_m3110_tx_empty(struct uart_port *port) +{ + return 1; +} + +static void serial_m3110_stop_tx(struct uart_port *port) +{ + return; +} + +/* stop_rx will be called in spin_lock env */ +static void serial_m3110_stop_rx(struct uart_port *port) +{ + return; +} + +#define WORDS_PER_XFER 128 +static void send_circ_buf(struct uart_max3110 *max, + struct circ_buf *xmit) +{ + void *buf; + u16 *obuf, *ibuf; + u8 valid_str[WORDS_PER_XFER]; + int i, j, len, blen, dma_size, left, ret = 0; + + + dma_size = WORDS_PER_XFER * sizeof(u16) * 2; + buf = kzalloc(dma_size, GFP_KERNEL | GFP_DMA); + if (!buf) + return; + obuf = buf; + ibuf = buf + dma_size/2; + + while (!uart_circ_empty(xmit)) { + left = uart_circ_chars_pending(xmit); + while (left) { + len = min(left, WORDS_PER_XFER); + blen = len * sizeof(u16); + memset(ibuf, 0, blen); + + for (i = 0; i < len; i++) { + obuf[i] = (u8)xmit->buf[xmit->tail] | WD_TAG; + xmit->tail = (xmit->tail + 1) & + (UART_XMIT_SIZE - 1); + } + + /* Fail to send msg to console is not very critical */ + ret = max3110_write_then_read(max, obuf, ibuf, blen, 0); + if (ret) + pr_warning(PR_FMT "%s(): get err msg %d\n", + __func__, ret); + + for (i = 0, j = 0; i < len; i++) { + if (ibuf[i] & MAX3110_READ_DATA_AVAILABLE) + valid_str[j++] = ibuf[i] & 0xff; + } + + if (j) + receive_chars(max, valid_str, j); + + max->port.icount.tx += len; + left -= len; + } + } + + kfree(buf); +} + +static void transmit_char(struct uart_max3110 *max) +{ + struct uart_port *port = &max->port; + struct circ_buf *xmit = &port->state->xmit; + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + send_circ_buf(max, xmit); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + serial_m3110_stop_tx(port); +} + +/* + * This will be called by uart_write() and tty_write, can't + * go to sleep + */ +static void serial_m3110_start_tx(struct uart_port *port) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + + if (!test_and_set_bit(UART_TX_NEEDED, &max->uart_flags)) + wake_up_process(max->main_thread); +} + +static void receive_chars(struct uart_max3110 *max, unsigned char *str, int len) +{ + struct uart_port *port = &max->port; + struct tty_struct *tty; + int usable; + + /* If uart is not opened, just return */ + if (!port->state) + return; + + tty = port->state->port.tty; + if (!tty) + return; + + while (len) { + usable = tty_buffer_request_room(tty, len); + if (usable) { + tty_insert_flip_string(tty, str, usable); + str += usable; + port->icount.rx += usable; + } + len -= usable; + } + tty_flip_buffer_push(tty); +} + +/* + * This routine will be used in read_thread or RX IRQ handling, + * it will first do one round buffer read(8 words), if there is some + * valid RX data, will try to read 5 more rounds till all data + * is read out. + * + * Use stack space as data buffer to save some system load, and chose + * 504 Btyes as a threadhold to do a bulk push to upper tty layer when + * receiving bulk data, a much bigger buffer may cause stack overflow + */ +static void max3110_con_receive(struct uart_max3110 *max) +{ + int loop = 1, num, total = 0; + u8 recv_buf[512], *pbuf; + + pbuf = recv_buf; + do { + num = max3110_read_multi(max, pbuf); + + if (num) { + loop = 5; + pbuf += num; + total += num; + + if (total >= 504) { + receive_chars(max, recv_buf, total); + pbuf = recv_buf; + total = 0; + } + } + } while (--loop); + + if (total) + receive_chars(max, recv_buf, total); +} + +static int max3110_main_thread(void *_max) +{ + struct uart_max3110 *max = _max; + wait_queue_head_t *wq = &max->wq; + int ret = 0; + struct circ_buf *xmit = &max->con_xmit; + + init_waitqueue_head(wq); + pr_info(PR_FMT "start main thread\n"); + + do { + wait_event_interruptible(*wq, max->uart_flags || kthread_should_stop()); + + mutex_lock(&max->thread_mutex); + + if (test_and_clear_bit(BIT_IRQ_PENDING, &max->uart_flags)) + max3110_con_receive(max); + + /* first handle console output */ + if (test_and_clear_bit(CON_TX_NEEDED, &max->uart_flags)) + send_circ_buf(max, xmit); + + /* handle uart output */ + if (test_and_clear_bit(UART_TX_NEEDED, &max->uart_flags)) + transmit_char(max); + + mutex_unlock(&max->thread_mutex); + + } while (!kthread_should_stop()); + + return ret; +} + +static irqreturn_t serial_m3110_irq(int irq, void *dev_id) +{ + struct uart_max3110 *max = dev_id; + + /* max3110's irq is a falling edge, not level triggered, + * so no need to disable the irq */ + if (!test_and_set_bit(BIT_IRQ_PENDING, &max->uart_flags)) + wake_up_process(max->main_thread); + + return IRQ_HANDLED; +} + +/* if don't use RX IRQ, then need a thread to polling read */ +static int max3110_read_thread(void *_max) +{ + struct uart_max3110 *max = _max; + + pr_info(PR_FMT "start read thread\n"); + do { + /* + * If can't acquire the mutex, it means the main thread + * is running which will also perform the rx job + */ + if (mutex_trylock(&max->thread_mutex)) { + max3110_con_receive(max); + mutex_unlock(&max->thread_mutex); + } + + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(HZ / 20); + } while (!kthread_should_stop()); + + return 0; +} + +static int serial_m3110_startup(struct uart_port *port) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + u16 config = 0; + int ret = 0; + + if (port->line != 0) { + pr_err(PR_FMT "uart port startup failed\n"); + return -1; + } + + /* Disable all IRQ and config it to 115200, 8n1 */ + config = WC_TAG | WC_FIFO_ENABLE + | WC_1_STOPBITS + | WC_8BIT_WORD + | WC_BAUD_DR2; + + /* as we use thread to handle tx/rx, need set low latency */ + port->state->port.tty->low_latency = 1; + + if (max->irq) { + max->read_thread = NULL; + ret = request_irq(max->irq, serial_m3110_irq, + IRQ_TYPE_EDGE_FALLING, "max3110", max); + if (ret) { + max->irq = 0; + pr_err(PR_FMT "unable to allocate IRQ, polling\n"); + } else { + /* Enable RX IRQ only */ + config |= WC_RXA_IRQ_ENABLE; + } + } + + if (max->irq == 0) { + /* If IRQ is disabled, start a read thread for input data */ + max->read_thread = + kthread_run(max3110_read_thread, max, "max3110_read"); + if (IS_ERR(max->read_thread)) { + ret = PTR_ERR(max->read_thread); + max->read_thread = NULL; + pr_err(PR_FMT "Can't create read thread!\n"); + return ret; + } + } + + ret = max3110_out(max, config); + if (ret) { + if (max->irq) + free_irq(max->irq, max); + if (max->read_thread) + kthread_stop(max->read_thread); + max->read_thread = NULL; + return ret; + } + + max->cur_conf = config; + return 0; +} + +static void serial_m3110_shutdown(struct uart_port *port) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + u16 config; + + if (max->read_thread) { + kthread_stop(max->read_thread); + max->read_thread = NULL; + } + + if (max->irq) + free_irq(max->irq, max); + + /* Disable interrupts from this port */ + config = WC_TAG | WC_SW_SHDI; + max3110_out(max, config); +} + +static void serial_m3110_release_port(struct uart_port *port) +{ +} + +static int serial_m3110_request_port(struct uart_port *port) +{ + return 0; +} + +static void serial_m3110_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_MAX3100; +} + +static int +serial_m3110_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + + +static const char *serial_m3110_type(struct uart_port *port) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + return max->name; +} + +static void +serial_m3110_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_max3110 *max = + container_of(port, struct uart_max3110, port); + unsigned char cval; + unsigned int baud, parity = 0; + int clk_div = -1; + u16 new_conf = max->cur_conf; + + switch (termios->c_cflag & CSIZE) { + case CS7: + cval = UART_LCR_WLEN7; + new_conf |= WC_7BIT_WORD; + break; + default: + /* We only support CS7 & CS8 */ + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + case CS8: + cval = UART_LCR_WLEN8; + new_conf |= WC_8BIT_WORD; + break; + } + + baud = uart_get_baud_rate(port, termios, old, 0, 230400); + + /* First calc the div for 1.8MHZ clock case */ + switch (baud) { + case 300: + clk_div = WC_BAUD_DR384; + break; + case 600: + clk_div = WC_BAUD_DR192; + break; + case 1200: + clk_div = WC_BAUD_DR96; + break; + case 2400: + clk_div = WC_BAUD_DR48; + break; + case 4800: + clk_div = WC_BAUD_DR24; + break; + case 9600: + clk_div = WC_BAUD_DR12; + break; + case 19200: + clk_div = WC_BAUD_DR6; + break; + case 38400: + clk_div = WC_BAUD_DR3; + break; + case 57600: + clk_div = WC_BAUD_DR2; + break; + case 115200: + clk_div = WC_BAUD_DR1; + break; + case 230400: + if (max->clock & MAX3110_HIGH_CLK) + break; + default: + /* Pick the previous baud rate */ + baud = max->baud; + clk_div = max->cur_conf & WC_BAUD_DIV_MASK; + tty_termios_encode_baud_rate(termios, baud, baud); + } + + if (max->clock & MAX3110_HIGH_CLK) { + clk_div += 1; + /* High clk version max3110 doesn't support B300 */ + if (baud == 300) { + baud = 600; + clk_div = WC_BAUD_DR384; + } + if (baud == 230400) + clk_div = WC_BAUD_DR1; + tty_termios_encode_baud_rate(termios, baud, baud); + } + + new_conf = (new_conf & ~WC_BAUD_DIV_MASK) | clk_div; + + if (unlikely(termios->c_cflag & CMSPAR)) + termios->c_cflag &= ~CMSPAR; + + if (termios->c_cflag & CSTOPB) + new_conf |= WC_2_STOPBITS; + else + new_conf &= ~WC_2_STOPBITS; + + if (termios->c_cflag & PARENB) { + new_conf |= WC_PARITY_ENABLE; + parity |= UART_LCR_PARITY; + } else + new_conf &= ~WC_PARITY_ENABLE; + + if (!(termios->c_cflag & PARODD)) + parity |= UART_LCR_EPAR; + max->parity = parity; + + uart_update_timeout(port, termios->c_cflag, baud); + + new_conf |= WC_TAG; + if (new_conf != max->cur_conf) { + if (!max3110_out(max, new_conf)) { + max->cur_conf = new_conf; + max->baud = baud; + } + } +} + +/* Don't handle hw handshaking */ +static unsigned int serial_m3110_get_mctrl(struct uart_port *port) +{ + return TIOCM_DSR | TIOCM_CAR | TIOCM_DSR; +} + +static void serial_m3110_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static void serial_m3110_break_ctl(struct uart_port *port, int break_state) +{ +} + +static void serial_m3110_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ +} + +static void serial_m3110_enable_ms(struct uart_port *port) +{ +} + +struct uart_ops serial_m3110_ops = { + .tx_empty = serial_m3110_tx_empty, + .set_mctrl = serial_m3110_set_mctrl, + .get_mctrl = serial_m3110_get_mctrl, + .stop_tx = serial_m3110_stop_tx, + .start_tx = serial_m3110_start_tx, + .stop_rx = serial_m3110_stop_rx, + .enable_ms = serial_m3110_enable_ms, + .break_ctl = serial_m3110_break_ctl, + .startup = serial_m3110_startup, + .shutdown = serial_m3110_shutdown, + .set_termios = serial_m3110_set_termios, + .pm = serial_m3110_pm, + .type = serial_m3110_type, + .release_port = serial_m3110_release_port, + .request_port = serial_m3110_request_port, + .config_port = serial_m3110_config_port, + .verify_port = serial_m3110_verify_port, +}; + +static struct uart_driver serial_m3110_reg = { + .owner = THIS_MODULE, + .driver_name = "MRST serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = 1, + .cons = &serial_m3110_console, +}; + +#ifdef CONFIG_PM +static int serial_m3110_suspend(struct spi_device *spi, pm_message_t state) +{ + struct uart_max3110 *max = spi_get_drvdata(spi); + + disable_irq(max->irq); + uart_suspend_port(&serial_m3110_reg, &max->port); + max3110_out(max, max->cur_conf | WC_SW_SHDI); + return 0; +} + +static int serial_m3110_resume(struct spi_device *spi) +{ + struct uart_max3110 *max = spi_get_drvdata(spi); + + max3110_out(max, max->cur_conf); + uart_resume_port(&serial_m3110_reg, &max->port); + enable_irq(max->irq); + return 0; +} +#else +#define serial_m3110_suspend NULL +#define serial_m3110_resume NULL +#endif + +static int __devinit serial_m3110_probe(struct spi_device *spi) +{ + struct uart_max3110 *max; + void *buffer; + u16 res; + int ret = 0; + + max = kzalloc(sizeof(*max), GFP_KERNEL); + if (!max) + return -ENOMEM; + + /* Set spi info */ + spi->bits_per_word = 16; + max->clock = MAX3110_HIGH_CLK; + + spi_setup(spi); + + max->port.type = PORT_MAX3100; + max->port.fifosize = 2; /* Only have 16b buffer */ + max->port.ops = &serial_m3110_ops; + max->port.line = 0; + max->port.dev = &spi->dev; + max->port.uartclk = 115200; + + max->spi = spi; + strcpy(max->name, spi->modalias); + max->irq = (u16)spi->irq; + + mutex_init(&max->thread_mutex); + + max->word_7bits = 0; + max->parity = 0; + max->baud = 0; + + max->cur_conf = 0; + max->uart_flags = 0; + + /* Check if reading configuration register returns something sane */ + + res = RC_TAG; + ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0); + if (ret < 0 || res == 0 || res == 0xffff) { + printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)", + res); + ret = -ENODEV; + goto err_get_page; + } + + buffer = (void *)__get_free_page(GFP_KERNEL); + if (!buffer) { + ret = -ENOMEM; + goto err_get_page; + } + max->con_xmit.buf = buffer; + max->con_xmit.head = 0; + max->con_xmit.tail = 0; + + max->main_thread = kthread_run(max3110_main_thread, + max, "max3110_main"); + if (IS_ERR(max->main_thread)) { + ret = PTR_ERR(max->main_thread); + goto err_kthread; + } + + spi_set_drvdata(spi, max); + pmax = max; + + /* Give membase a psudo value to pass serial_core's check */ + max->port.membase = (void *)0xff110000; + uart_add_one_port(&serial_m3110_reg, &max->port); + + return 0; + +err_kthread: + free_page((unsigned long)buffer); +err_get_page: + kfree(max); + return ret; +} + +static int __devexit serial_m3110_remove(struct spi_device *dev) +{ + struct uart_max3110 *max = spi_get_drvdata(dev); + + if (!max) + return 0; + + uart_remove_one_port(&serial_m3110_reg, &max->port); + + free_page((unsigned long)max->con_xmit.buf); + + if (max->main_thread) + kthread_stop(max->main_thread); + + kfree(max); + return 0; +} + +static struct spi_driver uart_max3110_driver = { + .driver = { + .name = "spi_max3111", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = serial_m3110_probe, + .remove = __devexit_p(serial_m3110_remove), + .suspend = serial_m3110_suspend, + .resume = serial_m3110_resume, +}; + +static int __init serial_m3110_init(void) +{ + int ret = 0; + + ret = uart_register_driver(&serial_m3110_reg); + if (ret) + return ret; + + ret = spi_register_driver(&uart_max3110_driver); + if (ret) + uart_unregister_driver(&serial_m3110_reg); + + return ret; +} + +static void __exit serial_m3110_exit(void) +{ + spi_unregister_driver(&uart_max3110_driver); + uart_unregister_driver(&serial_m3110_reg); +} + +module_init(serial_m3110_init); +module_exit(serial_m3110_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("max3110-uart"); diff --git a/drivers/tty/serial/mrst_max3110.h b/drivers/tty/serial/mrst_max3110.h new file mode 100644 index 000000000000..d1ef43af397c --- /dev/null +++ b/drivers/tty/serial/mrst_max3110.h @@ -0,0 +1,60 @@ +#ifndef _MRST_MAX3110_H +#define _MRST_MAX3110_H + +#define MAX3110_HIGH_CLK 0x1 /* 3.6864 MHZ */ +#define MAX3110_LOW_CLK 0x0 /* 1.8432 MHZ */ + +/* status bits for all 4 MAX3110 operate modes */ +#define MAX3110_READ_DATA_AVAILABLE (1 << 15) +#define MAX3110_WRITE_BUF_EMPTY (1 << 14) + +#define WC_TAG (3 << 14) +#define RC_TAG (1 << 14) +#define WD_TAG (2 << 14) +#define RD_TAG (0 << 14) + +/* bits def for write configuration */ +#define WC_FIFO_ENABLE_MASK (1 << 13) +#define WC_FIFO_ENABLE (0 << 13) + +#define WC_SW_SHDI (1 << 12) + +#define WC_IRQ_MASK (0xF << 8) +#define WC_TXE_IRQ_ENABLE (1 << 11) /* TX empty irq */ +#define WC_RXA_IRQ_ENABLE (1 << 10) /* RX availabe irq */ +#define WC_PAR_HIGH_IRQ_ENABLE (1 << 9) +#define WC_REC_ACT_IRQ_ENABLE (1 << 8) + +#define WC_IRDA_ENABLE (1 << 7) + +#define WC_STOPBITS_MASK (1 << 6) +#define WC_2_STOPBITS (1 << 6) +#define WC_1_STOPBITS (0 << 6) + +#define WC_PARITY_ENABLE_MASK (1 << 5) +#define WC_PARITY_ENABLE (1 << 5) + +#define WC_WORDLEN_MASK (1 << 4) +#define WC_7BIT_WORD (1 << 4) +#define WC_8BIT_WORD (0 << 4) + +#define WC_BAUD_DIV_MASK (0xF) +#define WC_BAUD_DR1 (0x0) +#define WC_BAUD_DR2 (0x1) +#define WC_BAUD_DR4 (0x2) +#define WC_BAUD_DR8 (0x3) +#define WC_BAUD_DR16 (0x4) +#define WC_BAUD_DR32 (0x5) +#define WC_BAUD_DR64 (0x6) +#define WC_BAUD_DR128 (0x7) +#define WC_BAUD_DR3 (0x8) +#define WC_BAUD_DR6 (0x9) +#define WC_BAUD_DR12 (0xA) +#define WC_BAUD_DR24 (0xB) +#define WC_BAUD_DR48 (0xC) +#define WC_BAUD_DR96 (0xD) +#define WC_BAUD_DR192 (0xE) +#define WC_BAUD_DR384 (0xF) + +#define M3110_RX_FIFO_DEPTH 8 +#endif diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c new file mode 100644 index 000000000000..8e43a7b69e64 --- /dev/null +++ b/drivers/tty/serial/msm_serial.c @@ -0,0 +1,758 @@ +/* + * drivers/serial/msm_serial.c - driver for msm7k serial device and console + * + * Copyright (C) 2007 Google, Inc. + * Author: Robert Love + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#if defined(CONFIG_SERIAL_MSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +# define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "msm_serial.h" + +struct msm_port { + struct uart_port uart; + char name[16]; + struct clk *clk; + unsigned int imr; +}; + +static void msm_stop_tx(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr &= ~UART_IMR_TXLEV; + msm_write(port, msm_port->imr, UART_IMR); +} + +static void msm_start_tx(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr |= UART_IMR_TXLEV; + msm_write(port, msm_port->imr, UART_IMR); +} + +static void msm_stop_rx(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE); + msm_write(port, msm_port->imr, UART_IMR); +} + +static void msm_enable_ms(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr |= UART_IMR_DELTA_CTS; + msm_write(port, msm_port->imr, UART_IMR); +} + +static void handle_rx(struct uart_port *port) +{ + struct tty_struct *tty = port->state->port.tty; + unsigned int sr; + + /* + * Handle overrun. My understanding of the hardware is that overrun + * is not tied to the RX buffer, so we handle the case out of band. + */ + if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) { + port->icount.overrun++; + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); + } + + /* and now the main RX loop */ + while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) { + unsigned int c; + char flag = TTY_NORMAL; + + c = msm_read(port, UART_RF); + + if (sr & UART_SR_RX_BREAK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (sr & UART_SR_PAR_FRAME_ERR) { + port->icount.frame++; + } else { + port->icount.rx++; + } + + /* Mask conditions we're ignorning. */ + sr &= port->read_status_mask; + + if (sr & UART_SR_RX_BREAK) { + flag = TTY_BREAK; + } else if (sr & UART_SR_PAR_FRAME_ERR) { + flag = TTY_FRAME; + } + + if (!uart_handle_sysrq_char(port, c)) + tty_insert_flip_char(tty, c, flag); + } + + tty_flip_buffer_push(tty); +} + +static void handle_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + struct msm_port *msm_port = UART_TO_MSM(port); + int sent_tx; + + if (port->x_char) { + msm_write(port, port->x_char, UART_TF); + port->icount.tx++; + port->x_char = 0; + } + + while (msm_read(port, UART_SR) & UART_SR_TX_READY) { + if (uart_circ_empty(xmit)) { + /* disable tx interrupts */ + msm_port->imr &= ~UART_IMR_TXLEV; + msm_write(port, msm_port->imr, UART_IMR); + break; + } + + msm_write(port, xmit->buf[xmit->tail], UART_TF); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + sent_tx = 1; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void handle_delta_cts(struct uart_port *port) +{ + msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); + port->icount.cts++; + wake_up_interruptible(&port->state->port.delta_msr_wait); +} + +static irqreturn_t msm_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int misr; + + spin_lock(&port->lock); + misr = msm_read(port, UART_MISR); + msm_write(port, 0, UART_IMR); /* disable interrupt */ + + if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) + handle_rx(port); + if (misr & UART_IMR_TXLEV) + handle_tx(port); + if (misr & UART_IMR_DELTA_CTS) + handle_delta_cts(port); + + msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */ + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static unsigned int msm_tx_empty(struct uart_port *port) +{ + return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0; +} + +static unsigned int msm_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS; +} + +static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned int mr; + + mr = msm_read(port, UART_MR1); + + if (!(mctrl & TIOCM_RTS)) { + mr &= ~UART_MR1_RX_RDY_CTL; + msm_write(port, mr, UART_MR1); + msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR); + } else { + mr |= UART_MR1_RX_RDY_CTL; + msm_write(port, mr, UART_MR1); + } +} + +static void msm_break_ctl(struct uart_port *port, int break_ctl) +{ + if (break_ctl) + msm_write(port, UART_CR_CMD_START_BREAK, UART_CR); + else + msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR); +} + +static int msm_set_baud_rate(struct uart_port *port, unsigned int baud) +{ + unsigned int baud_code, rxstale, watermark; + + switch (baud) { + case 300: + baud_code = UART_CSR_300; + rxstale = 1; + break; + case 600: + baud_code = UART_CSR_600; + rxstale = 1; + break; + case 1200: + baud_code = UART_CSR_1200; + rxstale = 1; + break; + case 2400: + baud_code = UART_CSR_2400; + rxstale = 1; + break; + case 4800: + baud_code = UART_CSR_4800; + rxstale = 1; + break; + case 9600: + baud_code = UART_CSR_9600; + rxstale = 2; + break; + case 14400: + baud_code = UART_CSR_14400; + rxstale = 3; + break; + case 19200: + baud_code = UART_CSR_19200; + rxstale = 4; + break; + case 28800: + baud_code = UART_CSR_28800; + rxstale = 6; + break; + case 38400: + baud_code = UART_CSR_38400; + rxstale = 8; + break; + case 57600: + baud_code = UART_CSR_57600; + rxstale = 16; + break; + case 115200: + default: + baud_code = UART_CSR_115200; + baud = 115200; + rxstale = 31; + break; + } + + msm_write(port, baud_code, UART_CSR); + + /* RX stale watermark */ + watermark = UART_IPR_STALE_LSB & rxstale; + watermark |= UART_IPR_RXSTALE_LAST; + watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2); + msm_write(port, watermark, UART_IPR); + + /* set RX watermark */ + watermark = (port->fifosize * 3) / 4; + msm_write(port, watermark, UART_RFWR); + + /* set TX watermark */ + msm_write(port, 10, UART_TFWR); + + return baud; +} + +static void msm_reset(struct uart_port *port) +{ + /* reset everything */ + msm_write(port, UART_CR_CMD_RESET_RX, UART_CR); + msm_write(port, UART_CR_CMD_RESET_TX, UART_CR); + msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); + msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR); + msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); + msm_write(port, UART_CR_CMD_SET_RFR, UART_CR); +} + +static void msm_init_clock(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + clk_enable(msm_port->clk); + msm_serial_set_mnd_regs(port); +} + +static int msm_startup(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int data, rfr_level; + int ret; + + snprintf(msm_port->name, sizeof(msm_port->name), + "msm_serial%d", port->line); + + ret = request_irq(port->irq, msm_irq, IRQF_TRIGGER_HIGH, + msm_port->name, port); + if (unlikely(ret)) + return ret; + + msm_init_clock(port); + + if (likely(port->fifosize > 12)) + rfr_level = port->fifosize - 12; + else + rfr_level = port->fifosize; + + /* set automatic RFR level */ + data = msm_read(port, UART_MR1); + data &= ~UART_MR1_AUTO_RFR_LEVEL1; + data &= ~UART_MR1_AUTO_RFR_LEVEL0; + data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2); + data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level; + msm_write(port, data, UART_MR1); + + /* make sure that RXSTALE count is non-zero */ + data = msm_read(port, UART_IPR); + if (unlikely(!data)) { + data |= UART_IPR_RXSTALE_LAST; + data |= UART_IPR_STALE_LSB; + msm_write(port, data, UART_IPR); + } + + msm_reset(port); + + msm_write(port, 0x05, UART_CR); /* enable TX & RX */ + + /* turn on RX and CTS interrupts */ + msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE | + UART_IMR_CURRENT_CTS; + msm_write(port, msm_port->imr, UART_IMR); + + return 0; +} + +static void msm_shutdown(struct uart_port *port) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + msm_port->imr = 0; + msm_write(port, 0, UART_IMR); /* disable interrupts */ + + clk_disable(msm_port->clk); + + free_irq(port->irq, port); +} + +static void msm_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, mr; + + spin_lock_irqsave(&port->lock, flags); + + /* calculate and set baud rate */ + baud = uart_get_baud_rate(port, termios, old, 300, 115200); + baud = msm_set_baud_rate(port, baud); + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + /* calculate parity */ + mr = msm_read(port, UART_MR2); + mr &= ~UART_MR2_PARITY_MODE; + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & PARODD) + mr |= UART_MR2_PARITY_MODE_ODD; + else if (termios->c_cflag & CMSPAR) + mr |= UART_MR2_PARITY_MODE_SPACE; + else + mr |= UART_MR2_PARITY_MODE_EVEN; + } + + /* calculate bits per char */ + mr &= ~UART_MR2_BITS_PER_CHAR; + switch (termios->c_cflag & CSIZE) { + case CS5: + mr |= UART_MR2_BITS_PER_CHAR_5; + break; + case CS6: + mr |= UART_MR2_BITS_PER_CHAR_6; + break; + case CS7: + mr |= UART_MR2_BITS_PER_CHAR_7; + break; + case CS8: + default: + mr |= UART_MR2_BITS_PER_CHAR_8; + break; + } + + /* calculate stop bits */ + mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO); + if (termios->c_cflag & CSTOPB) + mr |= UART_MR2_STOP_BIT_LEN_TWO; + else + mr |= UART_MR2_STOP_BIT_LEN_ONE; + + /* set parity, bits per char, and stop bit */ + msm_write(port, mr, UART_MR2); + + /* calculate and set hardware flow control */ + mr = msm_read(port, UART_MR1); + mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL); + if (termios->c_cflag & CRTSCTS) { + mr |= UART_MR1_CTS_CTL; + mr |= UART_MR1_RX_RDY_CTL; + } + msm_write(port, mr, UART_MR1); + + /* Configure status bits to ignore based on termio flags. */ + port->read_status_mask = 0; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART_SR_PAR_FRAME_ERR; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= UART_SR_RX_BREAK; + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *msm_type(struct uart_port *port) +{ + return "MSM"; +} + +static void msm_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *resource; + resource_size_t size; + + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!resource)) + return; + size = resource->end - resource->start + 1; + + release_mem_region(port->mapbase, size); + iounmap(port->membase); + port->membase = NULL; +} + +static int msm_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *resource; + resource_size_t size; + + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!resource)) + return -ENXIO; + size = resource->end - resource->start + 1; + + if (unlikely(!request_mem_region(port->mapbase, size, "msm_serial"))) + return -EBUSY; + + port->membase = ioremap(port->mapbase, size); + if (!port->membase) { + release_mem_region(port->mapbase, size); + return -EBUSY; + } + + return 0; +} + +static void msm_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_MSM; + msm_request_port(port); + } +} + +static int msm_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM)) + return -EINVAL; + if (unlikely(port->irq != ser->irq)) + return -EINVAL; + return 0; +} + +static void msm_power(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct msm_port *msm_port = UART_TO_MSM(port); + + switch (state) { + case 0: + clk_enable(msm_port->clk); + break; + case 3: + clk_disable(msm_port->clk); + break; + default: + printk(KERN_ERR "msm_serial: Unknown PM state %d\n", state); + } +} + +static struct uart_ops msm_uart_pops = { + .tx_empty = msm_tx_empty, + .set_mctrl = msm_set_mctrl, + .get_mctrl = msm_get_mctrl, + .stop_tx = msm_stop_tx, + .start_tx = msm_start_tx, + .stop_rx = msm_stop_rx, + .enable_ms = msm_enable_ms, + .break_ctl = msm_break_ctl, + .startup = msm_startup, + .shutdown = msm_shutdown, + .set_termios = msm_set_termios, + .type = msm_type, + .release_port = msm_release_port, + .request_port = msm_request_port, + .config_port = msm_config_port, + .verify_port = msm_verify_port, + .pm = msm_power, +}; + +static struct msm_port msm_uart_ports[] = { + { + .uart = { + .iotype = UPIO_MEM, + .ops = &msm_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .fifosize = 512, + .line = 0, + }, + }, + { + .uart = { + .iotype = UPIO_MEM, + .ops = &msm_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .fifosize = 512, + .line = 1, + }, + }, + { + .uart = { + .iotype = UPIO_MEM, + .ops = &msm_uart_pops, + .flags = UPF_BOOT_AUTOCONF, + .fifosize = 64, + .line = 2, + }, + }, +}; + +#define UART_NR ARRAY_SIZE(msm_uart_ports) + +static inline struct uart_port *get_port_from_line(unsigned int line) +{ + return &msm_uart_ports[line].uart; +} + +#ifdef CONFIG_SERIAL_MSM_CONSOLE + +static void msm_console_putchar(struct uart_port *port, int c) +{ + while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) + ; + msm_write(port, c, UART_TF); +} + +static void msm_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port; + struct msm_port *msm_port; + + BUG_ON(co->index < 0 || co->index >= UART_NR); + + port = get_port_from_line(co->index); + msm_port = UART_TO_MSM(port); + + spin_lock(&port->lock); + uart_console_write(port, s, count, msm_console_putchar); + spin_unlock(&port->lock); +} + +static int __init msm_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud, flow, bits, parity; + + if (unlikely(co->index >= UART_NR || co->index < 0)) + return -ENXIO; + + port = get_port_from_line(co->index); + + if (unlikely(!port->membase)) + return -ENXIO; + + port->cons = co; + + msm_init_clock(port); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + bits = 8; + parity = 'n'; + flow = 'n'; + msm_write(port, UART_MR2_BITS_PER_CHAR_8 | UART_MR2_STOP_BIT_LEN_ONE, + UART_MR2); /* 8N1 */ + + if (baud < 300 || baud > 115200) + baud = 115200; + msm_set_baud_rate(port, baud); + + msm_reset(port); + + printk(KERN_INFO "msm_serial: console setup on port #%d\n", port->line); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver msm_uart_driver; + +static struct console msm_console = { + .name = "ttyMSM", + .write = msm_console_write, + .device = uart_console_device, + .setup = msm_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &msm_uart_driver, +}; + +#define MSM_CONSOLE (&msm_console) + +#else +#define MSM_CONSOLE NULL +#endif + +static struct uart_driver msm_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "msm_serial", + .dev_name = "ttyMSM", + .nr = UART_NR, + .cons = MSM_CONSOLE, +}; + +static int __init msm_serial_probe(struct platform_device *pdev) +{ + struct msm_port *msm_port; + struct resource *resource; + struct uart_port *port; + int irq; + + if (unlikely(pdev->id < 0 || pdev->id >= UART_NR)) + return -ENXIO; + + printk(KERN_INFO "msm_serial: detected port #%d\n", pdev->id); + + port = get_port_from_line(pdev->id); + port->dev = &pdev->dev; + msm_port = UART_TO_MSM(port); + + msm_port->clk = clk_get(&pdev->dev, "uart_clk"); + if (IS_ERR(msm_port->clk)) + return PTR_ERR(msm_port->clk); + port->uartclk = clk_get_rate(msm_port->clk); + printk(KERN_INFO "uartclk = %d\n", port->uartclk); + + + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!resource)) + return -ENXIO; + port->mapbase = resource->start; + + irq = platform_get_irq(pdev, 0); + if (unlikely(irq < 0)) + return -ENXIO; + port->irq = irq; + + platform_set_drvdata(pdev, port); + + return uart_add_one_port(&msm_uart_driver, port); +} + +static int __devexit msm_serial_remove(struct platform_device *pdev) +{ + struct msm_port *msm_port = platform_get_drvdata(pdev); + + clk_put(msm_port->clk); + + return 0; +} + +static struct platform_driver msm_platform_driver = { + .remove = msm_serial_remove, + .driver = { + .name = "msm_serial", + .owner = THIS_MODULE, + }, +}; + +static int __init msm_serial_init(void) +{ + int ret; + + ret = uart_register_driver(&msm_uart_driver); + if (unlikely(ret)) + return ret; + + ret = platform_driver_probe(&msm_platform_driver, msm_serial_probe); + if (unlikely(ret)) + uart_unregister_driver(&msm_uart_driver); + + printk(KERN_INFO "msm_serial: driver initialized\n"); + + return ret; +} + +static void __exit msm_serial_exit(void) +{ +#ifdef CONFIG_SERIAL_MSM_CONSOLE + unregister_console(&msm_console); +#endif + platform_driver_unregister(&msm_platform_driver); + uart_unregister_driver(&msm_uart_driver); +} + +module_init(msm_serial_init); +module_exit(msm_serial_exit); + +MODULE_AUTHOR("Robert Love "); +MODULE_DESCRIPTION("Driver for msm7x serial device"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h new file mode 100644 index 000000000000..f6ca9ca79e98 --- /dev/null +++ b/drivers/tty/serial/msm_serial.h @@ -0,0 +1,173 @@ +/* + * drivers/serial/msm_serial.h + * + * Copyright (C) 2007 Google, Inc. + * Author: Robert Love + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DRIVERS_SERIAL_MSM_SERIAL_H +#define __DRIVERS_SERIAL_MSM_SERIAL_H + +#define UART_MR1 0x0000 + +#define UART_MR1_AUTO_RFR_LEVEL0 0x3F +#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00 +#define UART_MR1_RX_RDY_CTL (1 << 7) +#define UART_MR1_CTS_CTL (1 << 6) + +#define UART_MR2 0x0004 +#define UART_MR2_ERROR_MODE (1 << 6) +#define UART_MR2_BITS_PER_CHAR 0x30 +#define UART_MR2_BITS_PER_CHAR_5 (0x0 << 4) +#define UART_MR2_BITS_PER_CHAR_6 (0x1 << 4) +#define UART_MR2_BITS_PER_CHAR_7 (0x2 << 4) +#define UART_MR2_BITS_PER_CHAR_8 (0x3 << 4) +#define UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2) +#define UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2) +#define UART_MR2_PARITY_MODE_NONE 0x0 +#define UART_MR2_PARITY_MODE_ODD 0x1 +#define UART_MR2_PARITY_MODE_EVEN 0x2 +#define UART_MR2_PARITY_MODE_SPACE 0x3 +#define UART_MR2_PARITY_MODE 0x3 + +#define UART_CSR 0x0008 +#define UART_CSR_115200 0xFF +#define UART_CSR_57600 0xEE +#define UART_CSR_38400 0xDD +#define UART_CSR_28800 0xCC +#define UART_CSR_19200 0xBB +#define UART_CSR_14400 0xAA +#define UART_CSR_9600 0x99 +#define UART_CSR_4800 0x77 +#define UART_CSR_2400 0x55 +#define UART_CSR_1200 0x44 +#define UART_CSR_600 0x33 +#define UART_CSR_300 0x22 + +#define UART_TF 0x000C + +#define UART_CR 0x0010 +#define UART_CR_CMD_NULL (0 << 4) +#define UART_CR_CMD_RESET_RX (1 << 4) +#define UART_CR_CMD_RESET_TX (2 << 4) +#define UART_CR_CMD_RESET_ERR (3 << 4) +#define UART_CR_CMD_RESET_BREAK_INT (4 << 4) +#define UART_CR_CMD_START_BREAK (5 << 4) +#define UART_CR_CMD_STOP_BREAK (6 << 4) +#define UART_CR_CMD_RESET_CTS (7 << 4) +#define UART_CR_CMD_PACKET_MODE (9 << 4) +#define UART_CR_CMD_MODE_RESET (12 << 4) +#define UART_CR_CMD_SET_RFR (13 << 4) +#define UART_CR_CMD_RESET_RFR (14 << 4) +#define UART_CR_TX_DISABLE (1 << 3) +#define UART_CR_TX_ENABLE (1 << 3) +#define UART_CR_RX_DISABLE (1 << 3) +#define UART_CR_RX_ENABLE (1 << 3) + +#define UART_IMR 0x0014 +#define UART_IMR_TXLEV (1 << 0) +#define UART_IMR_RXSTALE (1 << 3) +#define UART_IMR_RXLEV (1 << 4) +#define UART_IMR_DELTA_CTS (1 << 5) +#define UART_IMR_CURRENT_CTS (1 << 6) + +#define UART_IPR_RXSTALE_LAST 0x20 +#define UART_IPR_STALE_LSB 0x1F +#define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80 + +#define UART_IPR 0x0018 +#define UART_TFWR 0x001C +#define UART_RFWR 0x0020 +#define UART_HCR 0x0024 + +#define UART_MREG 0x0028 +#define UART_NREG 0x002C +#define UART_DREG 0x0030 +#define UART_MNDREG 0x0034 +#define UART_IRDA 0x0038 +#define UART_MISR_MODE 0x0040 +#define UART_MISR_RESET 0x0044 +#define UART_MISR_EXPORT 0x0048 +#define UART_MISR_VAL 0x004C +#define UART_TEST_CTRL 0x0050 + +#define UART_SR 0x0008 +#define UART_SR_HUNT_CHAR (1 << 7) +#define UART_SR_RX_BREAK (1 << 6) +#define UART_SR_PAR_FRAME_ERR (1 << 5) +#define UART_SR_OVERRUN (1 << 4) +#define UART_SR_TX_EMPTY (1 << 3) +#define UART_SR_TX_READY (1 << 2) +#define UART_SR_RX_FULL (1 << 1) +#define UART_SR_RX_READY (1 << 0) + +#define UART_RF 0x000C +#define UART_MISR 0x0010 +#define UART_ISR 0x0014 + +#define UART_TO_MSM(uart_port) ((struct msm_port *) uart_port) + +static inline +void msm_write(struct uart_port *port, unsigned int val, unsigned int off) +{ + __raw_writel(val, port->membase + off); +} + +static inline +unsigned int msm_read(struct uart_port *port, unsigned int off) +{ + return __raw_readl(port->membase + off); +} + +/* + * Setup the MND registers to use the TCXO clock. + */ +static inline void msm_serial_set_mnd_regs_tcxo(struct uart_port *port) +{ + msm_write(port, 0x06, UART_MREG); + msm_write(port, 0xF1, UART_NREG); + msm_write(port, 0x0F, UART_DREG); + msm_write(port, 0x1A, UART_MNDREG); +} + +/* + * Setup the MND registers to use the TCXO clock divided by 4. + */ +static inline void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port) +{ + msm_write(port, 0x18, UART_MREG); + msm_write(port, 0xF6, UART_NREG); + msm_write(port, 0x0F, UART_DREG); + msm_write(port, 0x0A, UART_MNDREG); +} + +static inline +void msm_serial_set_mnd_regs_from_uartclk(struct uart_port *port) +{ + if (port->uartclk == 19200000) + msm_serial_set_mnd_regs_tcxo(port); + else + msm_serial_set_mnd_regs_tcxoby4(port); +} + +/* + * TROUT has a specific defect that makes it report it's uartclk + * as 19.2Mhz (TCXO) when it's actually 4.8Mhz (TCXO/4). This special + * cases TROUT to use the right clock. + */ +#ifdef CONFIG_MACH_TROUT +#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_tcxoby4 +#else +#define msm_serial_set_mnd_regs msm_serial_set_mnd_regs_from_uartclk +#endif + +#endif /* __DRIVERS_SERIAL_MSM_SERIAL_H */ diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c new file mode 100644 index 000000000000..9711e06a8374 --- /dev/null +++ b/drivers/tty/serial/mux.c @@ -0,0 +1,633 @@ +/* +** mux.c: +** serial driver for the Mux console found in some PA-RISC servers. +** +** (c) Copyright 2002 Ryan Bradetich +** (c) Copyright 2002 Hewlett-Packard Company +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** This Driver currently only supports the console (port 0) on the MUX. +** Additional work will be needed on this driver to enable the full +** functionality of the MUX. +** +*/ + +#include +#include +#include +#include +#include +#include +#include /* for udelay */ +#include +#include +#include +#include + +#ifdef CONFIG_MAGIC_SYSRQ +#include +#define SUPPORT_SYSRQ +#endif + +#include + +#define MUX_OFFSET 0x800 +#define MUX_LINE_OFFSET 0x80 + +#define MUX_FIFO_SIZE 255 +#define MUX_POLL_DELAY (30 * HZ / 1000) + +#define IO_DATA_REG_OFFSET 0x3c +#define IO_DCOUNT_REG_OFFSET 0x40 + +#define MUX_EOFIFO(status) ((status & 0xF000) == 0xF000) +#define MUX_STATUS(status) ((status & 0xF000) == 0x8000) +#define MUX_BREAK(status) ((status & 0xF000) == 0x2000) + +#define MUX_NR 256 +static unsigned int port_cnt __read_mostly; +struct mux_port { + struct uart_port port; + int enabled; +}; +static struct mux_port mux_ports[MUX_NR]; + +static struct uart_driver mux_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyB", + .dev_name = "ttyB", + .major = MUX_MAJOR, + .minor = 0, + .nr = MUX_NR, +}; + +static struct timer_list mux_timer; + +#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + IO_DATA_REG_OFFSET) +#define UART_GET_FIFO_CNT(p) __raw_readl((p)->membase + IO_DCOUNT_REG_OFFSET) + +/** + * get_mux_port_count - Get the number of available ports on the Mux. + * @dev: The parisc device. + * + * This function is used to determine the number of ports the Mux + * supports. The IODC data reports the number of ports the Mux + * can support, but there are cases where not all the Mux ports + * are connected. This function can override the IODC and + * return the true port count. + */ +static int __init get_mux_port_count(struct parisc_device *dev) +{ + int status; + u8 iodc_data[32]; + unsigned long bytecnt; + + /* If this is the built-in Mux for the K-Class (Eole CAP/MUX), + * we only need to allocate resources for 1 port since the + * other 7 ports are not connected. + */ + if(dev->id.hversion == 0x15) + return 1; + + status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32); + BUG_ON(status != PDC_OK); + + /* Return the number of ports specified in the iodc data. */ + return ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8; +} + +/** + * mux_tx_empty - Check if the transmitter fifo is empty. + * @port: Ptr to the uart_port. + * + * This function test if the transmitter fifo for the port + * described by 'port' is empty. If it is empty, this function + * should return TIOCSER_TEMT, otherwise return 0. + */ +static unsigned int mux_tx_empty(struct uart_port *port) +{ + return UART_GET_FIFO_CNT(port) ? 0 : TIOCSER_TEMT; +} + +/** + * mux_set_mctrl - Set the current state of the modem control inputs. + * @ports: Ptr to the uart_port. + * @mctrl: Modem control bits. + * + * The Serial MUX does not support CTS, DCD or DSR so this function + * is ignored. + */ +static void mux_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +/** + * mux_get_mctrl - Returns the current state of modem control inputs. + * @port: Ptr to the uart_port. + * + * The Serial MUX does not support CTS, DCD or DSR so these lines are + * treated as permanently active. + */ +static unsigned int mux_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +/** + * mux_stop_tx - Stop transmitting characters. + * @port: Ptr to the uart_port. + * + * The Serial MUX does not support this function. + */ +static void mux_stop_tx(struct uart_port *port) +{ +} + +/** + * mux_start_tx - Start transmitting characters. + * @port: Ptr to the uart_port. + * + * The Serial Mux does not support this function. + */ +static void mux_start_tx(struct uart_port *port) +{ +} + +/** + * mux_stop_rx - Stop receiving characters. + * @port: Ptr to the uart_port. + * + * The Serial Mux does not support this function. + */ +static void mux_stop_rx(struct uart_port *port) +{ +} + +/** + * mux_enable_ms - Enable modum status interrupts. + * @port: Ptr to the uart_port. + * + * The Serial Mux does not support this function. + */ +static void mux_enable_ms(struct uart_port *port) +{ +} + +/** + * mux_break_ctl - Control the transmitssion of a break signal. + * @port: Ptr to the uart_port. + * @break_state: Raise/Lower the break signal. + * + * The Serial Mux does not support this function. + */ +static void mux_break_ctl(struct uart_port *port, int break_state) +{ +} + +/** + * mux_write - Write chars to the mux fifo. + * @port: Ptr to the uart_port. + * + * This function writes all the data from the uart buffer to + * the mux fifo. + */ +static void mux_write(struct uart_port *port) +{ + int count; + struct circ_buf *xmit = &port->state->xmit; + + if(port->x_char) { + UART_PUT_CHAR(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if(uart_circ_empty(xmit) || uart_tx_stopped(port)) { + mux_stop_tx(port); + return; + } + + count = (port->fifosize) - UART_GET_FIFO_CNT(port); + do { + UART_PUT_CHAR(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if(uart_circ_empty(xmit)) + break; + + } while(--count > 0); + + while(UART_GET_FIFO_CNT(port)) + udelay(1); + + if(uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + mux_stop_tx(port); +} + +/** + * mux_read - Read chars from the mux fifo. + * @port: Ptr to the uart_port. + * + * This reads all available data from the mux's fifo and pushes + * the data to the tty layer. + */ +static void mux_read(struct uart_port *port) +{ + int data; + struct tty_struct *tty = port->state->port.tty; + __u32 start_count = port->icount.rx; + + while(1) { + data = __raw_readl(port->membase + IO_DATA_REG_OFFSET); + + if (MUX_STATUS(data)) + continue; + + if (MUX_EOFIFO(data)) + break; + + port->icount.rx++; + + if (MUX_BREAK(data)) { + port->icount.brk++; + if(uart_handle_break(port)) + continue; + } + + if (uart_handle_sysrq_char(port, data & 0xffu)) + continue; + + tty_insert_flip_char(tty, data & 0xFF, TTY_NORMAL); + } + + if (start_count != port->icount.rx) { + tty_flip_buffer_push(tty); + } +} + +/** + * mux_startup - Initialize the port. + * @port: Ptr to the uart_port. + * + * Grab any resources needed for this port and start the + * mux timer. + */ +static int mux_startup(struct uart_port *port) +{ + mux_ports[port->line].enabled = 1; + return 0; +} + +/** + * mux_shutdown - Disable the port. + * @port: Ptr to the uart_port. + * + * Release any resources needed for the port. + */ +static void mux_shutdown(struct uart_port *port) +{ + mux_ports[port->line].enabled = 0; +} + +/** + * mux_set_termios - Chane port parameters. + * @port: Ptr to the uart_port. + * @termios: new termios settings. + * @old: old termios settings. + * + * The Serial Mux does not support this function. + */ +static void +mux_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ +} + +/** + * mux_type - Describe the port. + * @port: Ptr to the uart_port. + * + * Return a pointer to a string constant describing the + * specified port. + */ +static const char *mux_type(struct uart_port *port) +{ + return "Mux"; +} + +/** + * mux_release_port - Release memory and IO regions. + * @port: Ptr to the uart_port. + * + * Release any memory and IO region resources currently in use by + * the port. + */ +static void mux_release_port(struct uart_port *port) +{ +} + +/** + * mux_request_port - Request memory and IO regions. + * @port: Ptr to the uart_port. + * + * Request any memory and IO region resources required by the port. + * If any fail, no resources should be registered when this function + * returns, and it should return -EBUSY on failure. + */ +static int mux_request_port(struct uart_port *port) +{ + return 0; +} + +/** + * mux_config_port - Perform port autoconfiguration. + * @port: Ptr to the uart_port. + * @type: Bitmask of required configurations. + * + * Perform any autoconfiguration steps for the port. This function is + * called if the UPF_BOOT_AUTOCONF flag is specified for the port. + * [Note: This is required for now because of a bug in the Serial core. + * rmk has already submitted a patch to linus, should be available for + * 2.5.47.] + */ +static void mux_config_port(struct uart_port *port, int type) +{ + port->type = PORT_MUX; +} + +/** + * mux_verify_port - Verify the port information. + * @port: Ptr to the uart_port. + * @ser: Ptr to the serial information. + * + * Verify the new serial port information contained within serinfo is + * suitable for this port type. + */ +static int mux_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if(port->membase == NULL) + return -EINVAL; + + return 0; +} + +/** + * mux_drv_poll - Mux poll function. + * @unused: Unused variable + * + * This function periodically polls the Serial MUX to check for new data. + */ +static void mux_poll(unsigned long unused) +{ + int i; + + for(i = 0; i < port_cnt; ++i) { + if(!mux_ports[i].enabled) + continue; + + mux_read(&mux_ports[i].port); + mux_write(&mux_ports[i].port); + } + + mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY); +} + + +#ifdef CONFIG_SERIAL_MUX_CONSOLE +static void mux_console_write(struct console *co, const char *s, unsigned count) +{ + /* Wait until the FIFO drains. */ + while(UART_GET_FIFO_CNT(&mux_ports[0].port)) + udelay(1); + + while(count--) { + if(*s == '\n') { + UART_PUT_CHAR(&mux_ports[0].port, '\r'); + } + UART_PUT_CHAR(&mux_ports[0].port, *s++); + } + +} + +static int mux_console_setup(struct console *co, char *options) +{ + return 0; +} + +struct tty_driver *mux_console_device(struct console *co, int *index) +{ + *index = co->index; + return mux_driver.tty_driver; +} + +static struct console mux_console = { + .name = "ttyB", + .write = mux_console_write, + .device = mux_console_device, + .setup = mux_console_setup, + .flags = CON_ENABLED | CON_PRINTBUFFER, + .index = 0, +}; + +#define MUX_CONSOLE &mux_console +#else +#define MUX_CONSOLE NULL +#endif + +static struct uart_ops mux_pops = { + .tx_empty = mux_tx_empty, + .set_mctrl = mux_set_mctrl, + .get_mctrl = mux_get_mctrl, + .stop_tx = mux_stop_tx, + .start_tx = mux_start_tx, + .stop_rx = mux_stop_rx, + .enable_ms = mux_enable_ms, + .break_ctl = mux_break_ctl, + .startup = mux_startup, + .shutdown = mux_shutdown, + .set_termios = mux_set_termios, + .type = mux_type, + .release_port = mux_release_port, + .request_port = mux_request_port, + .config_port = mux_config_port, + .verify_port = mux_verify_port, +}; + +/** + * mux_probe - Determine if the Serial Mux should claim this device. + * @dev: The parisc device. + * + * Deterimine if the Serial Mux should claim this chip (return 0) + * or not (return 1). + */ +static int __init mux_probe(struct parisc_device *dev) +{ + int i, status; + + int port_count = get_mux_port_count(dev); + printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.6\n", port_count); + + dev_set_drvdata(&dev->dev, (void *)(long)port_count); + request_mem_region(dev->hpa.start + MUX_OFFSET, + port_count * MUX_LINE_OFFSET, "Mux"); + + if(!port_cnt) { + mux_driver.cons = MUX_CONSOLE; + + status = uart_register_driver(&mux_driver); + if(status) { + printk(KERN_ERR "Serial mux: Unable to register driver.\n"); + return 1; + } + } + + for(i = 0; i < port_count; ++i, ++port_cnt) { + struct uart_port *port = &mux_ports[port_cnt].port; + port->iobase = 0; + port->mapbase = dev->hpa.start + MUX_OFFSET + + (i * MUX_LINE_OFFSET); + port->membase = ioremap_nocache(port->mapbase, MUX_LINE_OFFSET); + port->iotype = UPIO_MEM; + port->type = PORT_MUX; + port->irq = NO_IRQ; + port->uartclk = 0; + port->fifosize = MUX_FIFO_SIZE; + port->ops = &mux_pops; + port->flags = UPF_BOOT_AUTOCONF; + port->line = port_cnt; + + /* The port->timeout needs to match what is present in + * uart_wait_until_sent in serial_core.c. Otherwise + * the time spent in msleep_interruptable will be very + * long, causing the appearance of a console hang. + */ + port->timeout = HZ / 50; + spin_lock_init(&port->lock); + + status = uart_add_one_port(&mux_driver, port); + BUG_ON(status); + } + + return 0; +} + +static int __devexit mux_remove(struct parisc_device *dev) +{ + int i, j; + int port_count = (long)dev_get_drvdata(&dev->dev); + + /* Find Port 0 for this card in the mux_ports list. */ + for(i = 0; i < port_cnt; ++i) { + if(mux_ports[i].port.mapbase == dev->hpa.start + MUX_OFFSET) + break; + } + BUG_ON(i + port_count > port_cnt); + + /* Release the resources associated with each port on the device. */ + for(j = 0; j < port_count; ++j, ++i) { + struct uart_port *port = &mux_ports[i].port; + + uart_remove_one_port(&mux_driver, port); + if(port->membase) + iounmap(port->membase); + } + + release_mem_region(dev->hpa.start + MUX_OFFSET, port_count * MUX_LINE_OFFSET); + return 0; +} + +/* Hack. This idea was taken from the 8250_gsc.c on how to properly order + * the serial port detection in the proper order. The idea is we always + * want the builtin mux to be detected before addin mux cards, so we + * specifically probe for the builtin mux cards first. + * + * This table only contains the parisc_device_id of known builtin mux + * devices. All other mux cards will be detected by the generic mux_tbl. + */ +static struct parisc_device_id builtin_mux_tbl[] = { + { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x15, 0x0000D }, /* All K-class */ + { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x44, 0x0000D }, /* E35, E45, and E55 */ + { 0, } +}; + +static struct parisc_device_id mux_tbl[] = { + { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0000D }, + { 0, } +}; + +MODULE_DEVICE_TABLE(parisc, builtin_mux_tbl); +MODULE_DEVICE_TABLE(parisc, mux_tbl); + +static struct parisc_driver builtin_serial_mux_driver = { + .name = "builtin_serial_mux", + .id_table = builtin_mux_tbl, + .probe = mux_probe, + .remove = __devexit_p(mux_remove), +}; + +static struct parisc_driver serial_mux_driver = { + .name = "serial_mux", + .id_table = mux_tbl, + .probe = mux_probe, + .remove = __devexit_p(mux_remove), +}; + +/** + * mux_init - Serial MUX initialization procedure. + * + * Register the Serial MUX driver. + */ +static int __init mux_init(void) +{ + register_parisc_driver(&builtin_serial_mux_driver); + register_parisc_driver(&serial_mux_driver); + + if(port_cnt > 0) { + /* Start the Mux timer */ + init_timer(&mux_timer); + mux_timer.function = mux_poll; + mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY); + +#ifdef CONFIG_SERIAL_MUX_CONSOLE + register_console(&mux_console); +#endif + } + + return 0; +} + +/** + * mux_exit - Serial MUX cleanup procedure. + * + * Unregister the Serial MUX driver from the tty layer. + */ +static void __exit mux_exit(void) +{ + /* Delete the Mux timer. */ + if(port_cnt > 0) { + del_timer(&mux_timer); +#ifdef CONFIG_SERIAL_MUX_CONSOLE + unregister_console(&mux_console); +#endif + } + + unregister_parisc_driver(&builtin_serial_mux_driver); + unregister_parisc_driver(&serial_mux_driver); + uart_unregister_driver(&mux_driver); +} + +module_init(mux_init); +module_exit(mux_exit); + +MODULE_AUTHOR("Ryan Bradetich"); +MODULE_DESCRIPTION("Serial MUX driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(MUX_MAJOR); diff --git a/drivers/tty/serial/netx-serial.c b/drivers/tty/serial/netx-serial.c new file mode 100644 index 000000000000..7735c9f35fa0 --- /dev/null +++ b/drivers/tty/serial/netx-serial.c @@ -0,0 +1,750 @@ +/* + * drivers/serial/netx-serial.c + * + * Copyright (c) 2005 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if defined(CONFIG_SERIAL_NETX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* We've been assigned a range on the "Low-density serial ports" major */ +#define SERIAL_NX_MAJOR 204 +#define MINOR_START 170 + +enum uart_regs { + UART_DR = 0x00, + UART_SR = 0x04, + UART_LINE_CR = 0x08, + UART_BAUDDIV_MSB = 0x0c, + UART_BAUDDIV_LSB = 0x10, + UART_CR = 0x14, + UART_FR = 0x18, + UART_IIR = 0x1c, + UART_ILPR = 0x20, + UART_RTS_CR = 0x24, + UART_RTS_LEAD = 0x28, + UART_RTS_TRAIL = 0x2c, + UART_DRV_ENABLE = 0x30, + UART_BRM_CR = 0x34, + UART_RXFIFO_IRQLEVEL = 0x38, + UART_TXFIFO_IRQLEVEL = 0x3c, +}; + +#define SR_FE (1<<0) +#define SR_PE (1<<1) +#define SR_BE (1<<2) +#define SR_OE (1<<3) + +#define LINE_CR_BRK (1<<0) +#define LINE_CR_PEN (1<<1) +#define LINE_CR_EPS (1<<2) +#define LINE_CR_STP2 (1<<3) +#define LINE_CR_FEN (1<<4) +#define LINE_CR_5BIT (0<<5) +#define LINE_CR_6BIT (1<<5) +#define LINE_CR_7BIT (2<<5) +#define LINE_CR_8BIT (3<<5) +#define LINE_CR_BITS_MASK (3<<5) + +#define CR_UART_EN (1<<0) +#define CR_SIREN (1<<1) +#define CR_SIRLP (1<<2) +#define CR_MSIE (1<<3) +#define CR_RIE (1<<4) +#define CR_TIE (1<<5) +#define CR_RTIE (1<<6) +#define CR_LBE (1<<7) + +#define FR_CTS (1<<0) +#define FR_DSR (1<<1) +#define FR_DCD (1<<2) +#define FR_BUSY (1<<3) +#define FR_RXFE (1<<4) +#define FR_TXFF (1<<5) +#define FR_RXFF (1<<6) +#define FR_TXFE (1<<7) + +#define IIR_MIS (1<<0) +#define IIR_RIS (1<<1) +#define IIR_TIS (1<<2) +#define IIR_RTIS (1<<3) +#define IIR_MASK 0xf + +#define RTS_CR_AUTO (1<<0) +#define RTS_CR_RTS (1<<1) +#define RTS_CR_COUNT (1<<2) +#define RTS_CR_MOD2 (1<<3) +#define RTS_CR_RTS_POL (1<<4) +#define RTS_CR_CTS_CTR (1<<5) +#define RTS_CR_CTS_POL (1<<6) +#define RTS_CR_STICK (1<<7) + +#define UART_PORT_SIZE 0x40 +#define DRIVER_NAME "netx-uart" + +struct netx_port { + struct uart_port port; +}; + +static void netx_stop_tx(struct uart_port *port) +{ + unsigned int val; + val = readl(port->membase + UART_CR); + writel(val & ~CR_TIE, port->membase + UART_CR); +} + +static void netx_stop_rx(struct uart_port *port) +{ + unsigned int val; + val = readl(port->membase + UART_CR); + writel(val & ~CR_RIE, port->membase + UART_CR); +} + +static void netx_enable_ms(struct uart_port *port) +{ + unsigned int val; + val = readl(port->membase + UART_CR); + writel(val | CR_MSIE, port->membase + UART_CR); +} + +static inline void netx_transmit_buffer(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + if (port->x_char) { + writel(port->x_char, port->membase + UART_DR); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_tx_stopped(port) || uart_circ_empty(xmit)) { + netx_stop_tx(port); + return; + } + + do { + /* send xmit->buf[xmit->tail] + * out the port here */ + writel(xmit->buf[xmit->tail], port->membase + UART_DR); + xmit->tail = (xmit->tail + 1) & + (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (!(readl(port->membase + UART_FR) & FR_TXFF)); + + if (uart_circ_empty(xmit)) + netx_stop_tx(port); +} + +static void netx_start_tx(struct uart_port *port) +{ + writel( + readl(port->membase + UART_CR) | CR_TIE, port->membase + UART_CR); + + if (!(readl(port->membase + UART_FR) & FR_TXFF)) + netx_transmit_buffer(port); +} + +static unsigned int netx_tx_empty(struct uart_port *port) +{ + return readl(port->membase + UART_FR) & FR_BUSY ? 0 : TIOCSER_TEMT; +} + +static void netx_txint(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + netx_stop_tx(port); + return; + } + + netx_transmit_buffer(port); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void netx_rxint(struct uart_port *port) +{ + unsigned char rx, flg, status; + struct tty_struct *tty = port->state->port.tty; + + while (!(readl(port->membase + UART_FR) & FR_RXFE)) { + rx = readl(port->membase + UART_DR); + flg = TTY_NORMAL; + port->icount.rx++; + status = readl(port->membase + UART_SR); + if (status & SR_BE) { + writel(0, port->membase + UART_SR); + if (uart_handle_break(port)) + continue; + } + + if (unlikely(status & (SR_FE | SR_PE | SR_OE))) { + + if (status & SR_PE) + port->icount.parity++; + else if (status & SR_FE) + port->icount.frame++; + if (status & SR_OE) + port->icount.overrun++; + + status &= port->read_status_mask; + + if (status & SR_BE) + flg = TTY_BREAK; + else if (status & SR_PE) + flg = TTY_PARITY; + else if (status & SR_FE) + flg = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, rx)) + continue; + + uart_insert_char(port, status, SR_OE, rx, flg); + } + + tty_flip_buffer_push(tty); + return; +} + +static irqreturn_t netx_int(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned long flags; + unsigned char status; + + spin_lock_irqsave(&port->lock,flags); + + status = readl(port->membase + UART_IIR) & IIR_MASK; + while (status) { + if (status & IIR_RIS) + netx_rxint(port); + if (status & IIR_TIS) + netx_txint(port); + if (status & IIR_MIS) { + if (readl(port->membase + UART_FR) & FR_CTS) + uart_handle_cts_change(port, 1); + else + uart_handle_cts_change(port, 0); + } + writel(0, port->membase + UART_IIR); + status = readl(port->membase + UART_IIR) & IIR_MASK; + } + + spin_unlock_irqrestore(&port->lock,flags); + return IRQ_HANDLED; +} + +static unsigned int netx_get_mctrl(struct uart_port *port) +{ + unsigned int ret = TIOCM_DSR | TIOCM_CAR; + + if (readl(port->membase + UART_FR) & FR_CTS) + ret |= TIOCM_CTS; + + return ret; +} + +static void netx_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned int val; + + /* FIXME: Locking needed ? */ + if (mctrl & TIOCM_RTS) { + val = readl(port->membase + UART_RTS_CR); + writel(val | RTS_CR_RTS, port->membase + UART_RTS_CR); + } +} + +static void netx_break_ctl(struct uart_port *port, int break_state) +{ + unsigned int line_cr; + spin_lock_irq(&port->lock); + + line_cr = readl(port->membase + UART_LINE_CR); + if (break_state != 0) + line_cr |= LINE_CR_BRK; + else + line_cr &= ~LINE_CR_BRK; + writel(line_cr, port->membase + UART_LINE_CR); + + spin_unlock_irq(&port->lock); +} + +static int netx_startup(struct uart_port *port) +{ + int ret; + + ret = request_irq(port->irq, netx_int, 0, + DRIVER_NAME, port); + if (ret) { + dev_err(port->dev, "unable to grab irq%d\n",port->irq); + goto exit; + } + + writel(readl(port->membase + UART_LINE_CR) | LINE_CR_FEN, + port->membase + UART_LINE_CR); + + writel(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE | CR_UART_EN, + port->membase + UART_CR); + +exit: + return ret; +} + +static void netx_shutdown(struct uart_port *port) +{ + writel(0, port->membase + UART_CR) ; + + free_irq(port->irq, port); +} + +static void +netx_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud, quot; + unsigned char old_cr; + unsigned char line_cr = LINE_CR_FEN; + unsigned char rts_cr = 0; + + switch (termios->c_cflag & CSIZE) { + case CS5: + line_cr |= LINE_CR_5BIT; + break; + case CS6: + line_cr |= LINE_CR_6BIT; + break; + case CS7: + line_cr |= LINE_CR_7BIT; + break; + case CS8: + line_cr |= LINE_CR_8BIT; + break; + } + + if (termios->c_cflag & CSTOPB) + line_cr |= LINE_CR_STP2; + + if (termios->c_cflag & PARENB) { + line_cr |= LINE_CR_PEN; + if (!(termios->c_cflag & PARODD)) + line_cr |= LINE_CR_EPS; + } + + if (termios->c_cflag & CRTSCTS) + rts_cr = RTS_CR_AUTO | RTS_CR_CTS_CTR | RTS_CR_RTS_POL; + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = baud * 4096; + quot /= 1000; + quot *= 256; + quot /= 100000; + + spin_lock_irq(&port->lock); + + uart_update_timeout(port, termios->c_cflag, baud); + + old_cr = readl(port->membase + UART_CR); + + /* disable interrupts */ + writel(old_cr & ~(CR_MSIE | CR_RIE | CR_TIE | CR_RTIE), + port->membase + UART_CR); + + /* drain transmitter */ + while (readl(port->membase + UART_FR) & FR_BUSY); + + /* disable UART */ + writel(old_cr & ~CR_UART_EN, port->membase + UART_CR); + + /* modem status interrupts */ + old_cr &= ~CR_MSIE; + if (UART_ENABLE_MS(port, termios->c_cflag)) + old_cr |= CR_MSIE; + + writel((quot>>8) & 0xff, port->membase + UART_BAUDDIV_MSB); + writel(quot & 0xff, port->membase + UART_BAUDDIV_LSB); + writel(line_cr, port->membase + UART_LINE_CR); + + writel(rts_cr, port->membase + UART_RTS_CR); + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= SR_PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= SR_BE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= SR_PE; + } + + port->read_status_mask = 0; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= SR_BE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= SR_PE | SR_FE; + + writel(old_cr, port->membase + UART_CR); + + spin_unlock_irq(&port->lock); +} + +static const char *netx_type(struct uart_port *port) +{ + return port->type == PORT_NETX ? "NETX" : NULL; +} + +static void netx_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, UART_PORT_SIZE); +} + +static int netx_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, UART_PORT_SIZE, + DRIVER_NAME) != NULL ? 0 : -EBUSY; +} + +static void netx_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE && netx_request_port(port) == 0) + port->type = PORT_NETX; +} + +static int +netx_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_NETX) + ret = -EINVAL; + + return ret; +} + +static struct uart_ops netx_pops = { + .tx_empty = netx_tx_empty, + .set_mctrl = netx_set_mctrl, + .get_mctrl = netx_get_mctrl, + .stop_tx = netx_stop_tx, + .start_tx = netx_start_tx, + .stop_rx = netx_stop_rx, + .enable_ms = netx_enable_ms, + .break_ctl = netx_break_ctl, + .startup = netx_startup, + .shutdown = netx_shutdown, + .set_termios = netx_set_termios, + .type = netx_type, + .release_port = netx_release_port, + .request_port = netx_request_port, + .config_port = netx_config_port, + .verify_port = netx_verify_port, +}; + +static struct netx_port netx_ports[] = { + { + .port = { + .type = PORT_NETX, + .iotype = UPIO_MEM, + .membase = (char __iomem *)io_p2v(NETX_PA_UART0), + .mapbase = NETX_PA_UART0, + .irq = NETX_IRQ_UART0, + .uartclk = 100000000, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .ops = &netx_pops, + .line = 0, + }, + }, { + .port = { + .type = PORT_NETX, + .iotype = UPIO_MEM, + .membase = (char __iomem *)io_p2v(NETX_PA_UART1), + .mapbase = NETX_PA_UART1, + .irq = NETX_IRQ_UART1, + .uartclk = 100000000, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .ops = &netx_pops, + .line = 1, + }, + }, { + .port = { + .type = PORT_NETX, + .iotype = UPIO_MEM, + .membase = (char __iomem *)io_p2v(NETX_PA_UART2), + .mapbase = NETX_PA_UART2, + .irq = NETX_IRQ_UART2, + .uartclk = 100000000, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .ops = &netx_pops, + .line = 2, + }, + } +}; + +#ifdef CONFIG_SERIAL_NETX_CONSOLE + +static void netx_console_putchar(struct uart_port *port, int ch) +{ + while (readl(port->membase + UART_FR) & FR_BUSY); + writel(ch, port->membase + UART_DR); +} + +static void +netx_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_port *port = &netx_ports[co->index].port; + unsigned char cr_save; + + cr_save = readl(port->membase + UART_CR); + writel(cr_save | CR_UART_EN, port->membase + UART_CR); + + uart_console_write(port, s, count, netx_console_putchar); + + while (readl(port->membase + UART_FR) & FR_BUSY); + writel(cr_save, port->membase + UART_CR); +} + +static void __init +netx_console_get_options(struct uart_port *port, int *baud, + int *parity, int *bits, int *flow) +{ + unsigned char line_cr; + + *baud = (readl(port->membase + UART_BAUDDIV_MSB) << 8) | + readl(port->membase + UART_BAUDDIV_LSB); + *baud *= 1000; + *baud /= 4096; + *baud *= 1000; + *baud /= 256; + *baud *= 100; + + line_cr = readl(port->membase + UART_LINE_CR); + *parity = 'n'; + if (line_cr & LINE_CR_PEN) { + if (line_cr & LINE_CR_EPS) + *parity = 'e'; + else + *parity = 'o'; + } + + switch (line_cr & LINE_CR_BITS_MASK) { + case LINE_CR_8BIT: + *bits = 8; + break; + case LINE_CR_7BIT: + *bits = 7; + break; + case LINE_CR_6BIT: + *bits = 6; + break; + case LINE_CR_5BIT: + *bits = 5; + break; + } + + if (readl(port->membase + UART_RTS_CR) & RTS_CR_AUTO) + *flow = 'r'; +} + +static int __init +netx_console_setup(struct console *co, char *options) +{ + struct netx_port *sport; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= ARRAY_SIZE(netx_ports)) + co->index = 0; + sport = &netx_ports[co->index]; + + if (options) { + uart_parse_options(options, &baud, &parity, &bits, &flow); + } else { + /* if the UART is enabled, assume it has been correctly setup + * by the bootloader and get the options + */ + if (readl(sport->port.membase + UART_CR) & CR_UART_EN) { + netx_console_get_options(&sport->port, &baud, + &parity, &bits, &flow); + } + + } + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver netx_reg; +static struct console netx_console = { + .name = "ttyNX", + .write = netx_console_write, + .device = uart_console_device, + .setup = netx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &netx_reg, +}; + +static int __init netx_console_init(void) +{ + register_console(&netx_console); + return 0; +} +console_initcall(netx_console_init); + +#define NETX_CONSOLE &netx_console +#else +#define NETX_CONSOLE NULL +#endif + +static struct uart_driver netx_reg = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = "ttyNX", + .major = SERIAL_NX_MAJOR, + .minor = MINOR_START, + .nr = ARRAY_SIZE(netx_ports), + .cons = NETX_CONSOLE, +}; + +static int serial_netx_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct netx_port *sport = platform_get_drvdata(pdev); + + if (sport) + uart_suspend_port(&netx_reg, &sport->port); + + return 0; +} + +static int serial_netx_resume(struct platform_device *pdev) +{ + struct netx_port *sport = platform_get_drvdata(pdev); + + if (sport) + uart_resume_port(&netx_reg, &sport->port); + + return 0; +} + +static int serial_netx_probe(struct platform_device *pdev) +{ + struct uart_port *port = &netx_ports[pdev->id].port; + + dev_info(&pdev->dev, "initialising\n"); + + port->dev = &pdev->dev; + + writel(1, port->membase + UART_RXFIFO_IRQLEVEL); + uart_add_one_port(&netx_reg, &netx_ports[pdev->id].port); + platform_set_drvdata(pdev, &netx_ports[pdev->id]); + + return 0; +} + +static int serial_netx_remove(struct platform_device *pdev) +{ + struct netx_port *sport = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + if (sport) + uart_remove_one_port(&netx_reg, &sport->port); + + return 0; +} + +static struct platform_driver serial_netx_driver = { + .probe = serial_netx_probe, + .remove = serial_netx_remove, + + .suspend = serial_netx_suspend, + .resume = serial_netx_resume, + + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init netx_serial_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: NetX driver\n"); + + ret = uart_register_driver(&netx_reg); + if (ret) + return ret; + + ret = platform_driver_register(&serial_netx_driver); + if (ret != 0) + uart_unregister_driver(&netx_reg); + + return 0; +} + +static void __exit netx_serial_exit(void) +{ + platform_driver_unregister(&serial_netx_driver); + uart_unregister_driver(&netx_reg); +} + +module_init(netx_serial_init); +module_exit(netx_serial_exit); + +MODULE_AUTHOR("Sascha Hauer"); +MODULE_DESCRIPTION("NetX serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c new file mode 100644 index 000000000000..de173671e3d0 --- /dev/null +++ b/drivers/tty/serial/nwpserial.c @@ -0,0 +1,477 @@ +/* + * Serial Port driver for a NWP uart device + * + * Copyright (C) 2008 IBM Corp., Benjamin Krill + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define NWPSERIAL_NR 2 + +#define NWPSERIAL_STATUS_RXVALID 0x1 +#define NWPSERIAL_STATUS_TXFULL 0x2 + +struct nwpserial_port { + struct uart_port port; + dcr_host_t dcr_host; + unsigned int ier; + unsigned int mcr; +}; + +static DEFINE_MUTEX(nwpserial_mutex); +static struct nwpserial_port nwpserial_ports[NWPSERIAL_NR]; + +static void wait_for_bits(struct nwpserial_port *up, int bits) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = dcr_read(up->dcr_host, UART_LSR); + + if (--tmout == 0) + break; + udelay(1); + } while ((status & bits) != bits); +} + +#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE +static void nwpserial_console_putchar(struct uart_port *port, int c) +{ + struct nwpserial_port *up; + up = container_of(port, struct nwpserial_port, port); + /* check if tx buffer is full */ + wait_for_bits(up, UART_LSR_THRE); + dcr_write(up->dcr_host, UART_TX, c); + up->port.icount.tx++; +} + +static void +nwpserial_console_write(struct console *co, const char *s, unsigned int count) +{ + struct nwpserial_port *up = &nwpserial_ports[co->index]; + unsigned long flags; + int locked = 1; + + if (oops_in_progress) + locked = spin_trylock_irqsave(&up->port.lock, flags); + else + spin_lock_irqsave(&up->port.lock, flags); + + /* save and disable interrupt */ + up->ier = dcr_read(up->dcr_host, UART_IER); + dcr_write(up->dcr_host, UART_IER, up->ier & ~UART_IER_RDI); + + uart_console_write(&up->port, s, count, nwpserial_console_putchar); + + /* wait for transmitter to become empty */ + while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0) + cpu_relax(); + + /* restore interrupt state */ + dcr_write(up->dcr_host, UART_IER, up->ier); + + if (locked) + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static struct uart_driver nwpserial_reg; +static struct console nwpserial_console = { + .name = "ttySQ", + .write = nwpserial_console_write, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &nwpserial_reg, +}; +#define NWPSERIAL_CONSOLE (&nwpserial_console) +#else +#define NWPSERIAL_CONSOLE NULL +#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */ + +/**************************************************************************/ + +static int nwpserial_request_port(struct uart_port *port) +{ + return 0; +} + +static void nwpserial_release_port(struct uart_port *port) +{ + /* N/A */ +} + +static void nwpserial_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_NWPSERIAL; +} + +static irqreturn_t nwpserial_interrupt(int irq, void *dev_id) +{ + struct nwpserial_port *up = dev_id; + struct tty_struct *tty = up->port.state->port.tty; + irqreturn_t ret; + unsigned int iir; + unsigned char ch; + + spin_lock(&up->port.lock); + + /* check if the uart was the interrupt source. */ + iir = dcr_read(up->dcr_host, UART_IIR); + if (!iir) { + ret = IRQ_NONE; + goto out; + } + + do { + up->port.icount.rx++; + ch = dcr_read(up->dcr_host, UART_RX); + if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID) + tty_insert_flip_char(tty, ch, TTY_NORMAL); + } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR); + + tty_flip_buffer_push(tty); + ret = IRQ_HANDLED; + + /* clear interrupt */ + dcr_write(up->dcr_host, UART_IIR, 1); +out: + spin_unlock(&up->port.lock); + return ret; +} + +static int nwpserial_startup(struct uart_port *port) +{ + struct nwpserial_port *up; + int err; + + up = container_of(port, struct nwpserial_port, port); + + /* disable flow control by default */ + up->mcr = dcr_read(up->dcr_host, UART_MCR) & ~UART_MCR_AFE; + dcr_write(up->dcr_host, UART_MCR, up->mcr); + + /* register interrupt handler */ + err = request_irq(up->port.irq, nwpserial_interrupt, + IRQF_SHARED, "nwpserial", up); + if (err) + return err; + + /* enable interrupts */ + up->ier = UART_IER_RDI; + dcr_write(up->dcr_host, UART_IER, up->ier); + + /* enable receiving */ + up->port.ignore_status_mask &= ~NWPSERIAL_STATUS_RXVALID; + + return 0; +} + +static void nwpserial_shutdown(struct uart_port *port) +{ + struct nwpserial_port *up; + up = container_of(port, struct nwpserial_port, port); + + /* disable receiving */ + up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID; + + /* disable interrupts from this port */ + up->ier = 0; + dcr_write(up->dcr_host, UART_IER, up->ier); + + /* free irq */ + free_irq(up->port.irq, port); +} + +static int nwpserial_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + return -EINVAL; +} + +static const char *nwpserial_type(struct uart_port *port) +{ + return port->type == PORT_NWPSERIAL ? "nwpserial" : NULL; +} + +static void nwpserial_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct nwpserial_port *up; + up = container_of(port, struct nwpserial_port, port); + + up->port.read_status_mask = NWPSERIAL_STATUS_RXVALID + | NWPSERIAL_STATUS_TXFULL; + + up->port.ignore_status_mask = 0; + /* ignore all characters if CREAD is not set */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= NWPSERIAL_STATUS_RXVALID; + + /* Copy back the old hardware settings */ + if (old) + tty_termios_copy_hw(termios, old); +} + +static void nwpserial_break_ctl(struct uart_port *port, int ctl) +{ + /* N/A */ +} + +static void nwpserial_enable_ms(struct uart_port *port) +{ + /* N/A */ +} + +static void nwpserial_stop_rx(struct uart_port *port) +{ + struct nwpserial_port *up; + up = container_of(port, struct nwpserial_port, port); + /* don't forward any more data (like !CREAD) */ + up->port.ignore_status_mask = NWPSERIAL_STATUS_RXVALID; +} + +static void nwpserial_putchar(struct nwpserial_port *up, unsigned char c) +{ + /* check if tx buffer is full */ + wait_for_bits(up, UART_LSR_THRE); + dcr_write(up->dcr_host, UART_TX, c); + up->port.icount.tx++; +} + +static void nwpserial_start_tx(struct uart_port *port) +{ + struct nwpserial_port *up; + struct circ_buf *xmit; + up = container_of(port, struct nwpserial_port, port); + xmit = &up->port.state->xmit; + + if (port->x_char) { + nwpserial_putchar(up, up->port.x_char); + port->x_char = 0; + } + + while (!(uart_circ_empty(xmit) || uart_tx_stopped(&up->port))) { + nwpserial_putchar(up, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1); + } +} + +static unsigned int nwpserial_get_mctrl(struct uart_port *port) +{ + return 0; +} + +static void nwpserial_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* N/A */ +} + +static void nwpserial_stop_tx(struct uart_port *port) +{ + /* N/A */ +} + +static unsigned int nwpserial_tx_empty(struct uart_port *port) +{ + struct nwpserial_port *up; + unsigned long flags; + int ret; + up = container_of(port, struct nwpserial_port, port); + + spin_lock_irqsave(&up->port.lock, flags); + ret = dcr_read(up->dcr_host, UART_LSR); + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret & UART_LSR_TEMT ? TIOCSER_TEMT : 0; +} + +static struct uart_ops nwpserial_pops = { + .tx_empty = nwpserial_tx_empty, + .set_mctrl = nwpserial_set_mctrl, + .get_mctrl = nwpserial_get_mctrl, + .stop_tx = nwpserial_stop_tx, + .start_tx = nwpserial_start_tx, + .stop_rx = nwpserial_stop_rx, + .enable_ms = nwpserial_enable_ms, + .break_ctl = nwpserial_break_ctl, + .startup = nwpserial_startup, + .shutdown = nwpserial_shutdown, + .set_termios = nwpserial_set_termios, + .type = nwpserial_type, + .release_port = nwpserial_release_port, + .request_port = nwpserial_request_port, + .config_port = nwpserial_config_port, + .verify_port = nwpserial_verify_port, +}; + +static struct uart_driver nwpserial_reg = { + .owner = THIS_MODULE, + .driver_name = "nwpserial", + .dev_name = "ttySQ", + .major = TTY_MAJOR, + .minor = 68, + .nr = NWPSERIAL_NR, + .cons = NWPSERIAL_CONSOLE, +}; + +int nwpserial_register_port(struct uart_port *port) +{ + struct nwpserial_port *up = NULL; + int ret = -1; + int i; + static int first = 1; + int dcr_len; + int dcr_base; + struct device_node *dn; + + mutex_lock(&nwpserial_mutex); + + dn = port->dev->of_node; + if (dn == NULL) + goto out; + + /* get dcr base. */ + dcr_base = dcr_resource_start(dn, 0); + + /* find matching entry */ + for (i = 0; i < NWPSERIAL_NR; i++) + if (nwpserial_ports[i].port.iobase == dcr_base) { + up = &nwpserial_ports[i]; + break; + } + + /* we didn't find a mtching entry, search for a free port */ + if (up == NULL) + for (i = 0; i < NWPSERIAL_NR; i++) + if (nwpserial_ports[i].port.type == PORT_UNKNOWN && + nwpserial_ports[i].port.iobase == 0) { + up = &nwpserial_ports[i]; + break; + } + + if (up == NULL) { + ret = -EBUSY; + goto out; + } + + if (first) + uart_register_driver(&nwpserial_reg); + first = 0; + + up->port.membase = port->membase; + up->port.irq = port->irq; + up->port.uartclk = port->uartclk; + up->port.fifosize = port->fifosize; + up->port.regshift = port->regshift; + up->port.iotype = port->iotype; + up->port.flags = port->flags; + up->port.mapbase = port->mapbase; + up->port.private_data = port->private_data; + + if (port->dev) + up->port.dev = port->dev; + + if (up->port.iobase != dcr_base) { + up->port.ops = &nwpserial_pops; + up->port.fifosize = 16; + + spin_lock_init(&up->port.lock); + + up->port.iobase = dcr_base; + dcr_len = dcr_resource_len(dn, 0); + + up->dcr_host = dcr_map(dn, dcr_base, dcr_len); + if (!DCR_MAP_OK(up->dcr_host)) { + printk(KERN_ERR "Cannot map DCR resources for NWPSERIAL"); + goto out; + } + } + + ret = uart_add_one_port(&nwpserial_reg, &up->port); + if (ret == 0) + ret = up->port.line; + +out: + mutex_unlock(&nwpserial_mutex); + + return ret; +} +EXPORT_SYMBOL(nwpserial_register_port); + +void nwpserial_unregister_port(int line) +{ + struct nwpserial_port *up = &nwpserial_ports[line]; + mutex_lock(&nwpserial_mutex); + uart_remove_one_port(&nwpserial_reg, &up->port); + + up->port.type = PORT_UNKNOWN; + + mutex_unlock(&nwpserial_mutex); +} +EXPORT_SYMBOL(nwpserial_unregister_port); + +#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE +static int __init nwpserial_console_init(void) +{ + struct nwpserial_port *up = NULL; + struct device_node *dn; + const char *name; + int dcr_base; + int dcr_len; + int i; + + /* search for a free port */ + for (i = 0; i < NWPSERIAL_NR; i++) + if (nwpserial_ports[i].port.type == PORT_UNKNOWN) { + up = &nwpserial_ports[i]; + break; + } + + if (up == NULL) + return -1; + + name = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (name == NULL) + return -1; + + dn = of_find_node_by_path(name); + if (!dn) + return -1; + + spin_lock_init(&up->port.lock); + up->port.ops = &nwpserial_pops; + up->port.type = PORT_NWPSERIAL; + up->port.fifosize = 16; + + dcr_base = dcr_resource_start(dn, 0); + dcr_len = dcr_resource_len(dn, 0); + up->port.iobase = dcr_base; + + up->dcr_host = dcr_map(dn, dcr_base, dcr_len); + if (!DCR_MAP_OK(up->dcr_host)) { + printk("Cannot map DCR resources for SERIAL"); + return -1; + } + register_console(&nwpserial_console); + return 0; +} +console_initcall(nwpserial_console_init); +#endif /* CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE */ diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c new file mode 100644 index 000000000000..5c7abe4c94dd --- /dev/null +++ b/drivers/tty/serial/of_serial.c @@ -0,0 +1,201 @@ +/* + * Serial Port driver for Open Firmware platform devices + * + * Copyright (C) 2006 Arnd Bergmann , IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct of_serial_info { + int type; + int line; +}; + +/* + * Fill a struct uart_port for a given device node + */ +static int __devinit of_platform_serial_setup(struct platform_device *ofdev, + int type, struct uart_port *port) +{ + struct resource resource; + struct device_node *np = ofdev->dev.of_node; + const __be32 *clk, *spd; + const __be32 *prop; + int ret, prop_size; + + memset(port, 0, sizeof *port); + spd = of_get_property(np, "current-speed", NULL); + clk = of_get_property(np, "clock-frequency", NULL); + if (!clk) { + dev_warn(&ofdev->dev, "no clock-frequency property set\n"); + return -ENODEV; + } + + ret = of_address_to_resource(np, 0, &resource); + if (ret) { + dev_warn(&ofdev->dev, "invalid address\n"); + return ret; + } + + spin_lock_init(&port->lock); + port->mapbase = resource.start; + + /* Check for shifted address mapping */ + prop = of_get_property(np, "reg-offset", &prop_size); + if (prop && (prop_size == sizeof(u32))) + port->mapbase += be32_to_cpup(prop); + + /* Check for registers offset within the devices address range */ + prop = of_get_property(np, "reg-shift", &prop_size); + if (prop && (prop_size == sizeof(u32))) + port->regshift = be32_to_cpup(prop); + + port->irq = irq_of_parse_and_map(np, 0); + port->iotype = UPIO_MEM; + port->type = type; + port->uartclk = be32_to_cpup(clk); + port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP + | UPF_FIXED_PORT | UPF_FIXED_TYPE; + port->dev = &ofdev->dev; + /* If current-speed was set, then try not to change it. */ + if (spd) + port->custom_divisor = be32_to_cpup(clk) / (16 * (be32_to_cpup(spd))); + + return 0; +} + +/* + * Try to register a serial port + */ +static int __devinit of_platform_serial_probe(struct platform_device *ofdev, + const struct of_device_id *id) +{ + struct of_serial_info *info; + struct uart_port port; + int port_type; + int ret; + + if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL)) + return -EBUSY; + + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (info == NULL) + return -ENOMEM; + + port_type = (unsigned long)id->data; + ret = of_platform_serial_setup(ofdev, port_type, &port); + if (ret) + goto out; + + switch (port_type) { +#ifdef CONFIG_SERIAL_8250 + case PORT_8250 ... PORT_MAX_8250: + ret = serial8250_register_port(&port); + break; +#endif +#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL + case PORT_NWPSERIAL: + ret = nwpserial_register_port(&port); + break; +#endif + default: + /* need to add code for these */ + case PORT_UNKNOWN: + dev_info(&ofdev->dev, "Unknown serial port found, ignored\n"); + ret = -ENODEV; + break; + } + if (ret < 0) + goto out; + + info->type = port_type; + info->line = ret; + dev_set_drvdata(&ofdev->dev, info); + return 0; +out: + kfree(info); + irq_dispose_mapping(port.irq); + return ret; +} + +/* + * Release a line + */ +static int of_platform_serial_remove(struct platform_device *ofdev) +{ + struct of_serial_info *info = dev_get_drvdata(&ofdev->dev); + switch (info->type) { +#ifdef CONFIG_SERIAL_8250 + case PORT_8250 ... PORT_MAX_8250: + serial8250_unregister_port(info->line); + break; +#endif +#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL + case PORT_NWPSERIAL: + nwpserial_unregister_port(info->line); + break; +#endif + default: + /* need to add code for these */ + break; + } + kfree(info); + return 0; +} + +/* + * A few common types, add more as needed. + */ +static struct of_device_id __devinitdata of_platform_serial_table[] = { + { .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, }, + { .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, }, + { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, }, + { .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, }, + { .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, }, + { .type = "serial", .compatible = "ns16850", .data = (void *)PORT_16850, }, +#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL + { .type = "serial", .compatible = "ibm,qpace-nwp-serial", + .data = (void *)PORT_NWPSERIAL, }, +#endif + { .type = "serial", .data = (void *)PORT_UNKNOWN, }, + { /* end of list */ }, +}; + +static struct of_platform_driver of_platform_serial_driver = { + .driver = { + .name = "of_serial", + .owner = THIS_MODULE, + .of_match_table = of_platform_serial_table, + }, + .probe = of_platform_serial_probe, + .remove = of_platform_serial_remove, +}; + +static int __init of_platform_serial_init(void) +{ + return of_register_platform_driver(&of_platform_serial_driver); +} +module_init(of_platform_serial_init); + +static void __exit of_platform_serial_exit(void) +{ + return of_unregister_platform_driver(&of_platform_serial_driver); +}; +module_exit(of_platform_serial_exit); + +MODULE_AUTHOR("Arnd Bergmann "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Serial Port driver for Open Firmware platform devices"); diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c new file mode 100644 index 000000000000..7f2f01058789 --- /dev/null +++ b/drivers/tty/serial/omap-serial.c @@ -0,0 +1,1359 @@ +/* + * Driver for OMAP-UART controller. + * Based on drivers/serial/8250.c + * + * Copyright (C) 2010 Texas Instruments. + * + * Authors: + * Govindraj R + * Thara Gopinath + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Note: This driver is made seperate from 8250 driver as we cannot + * over load 8250 driver with omap platform specific configuration for + * features like DMA, it makes easier to implement features like DMA and + * hardware flow control and software flow control configuration with + * this driver as required for the omap-platform. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; + +/* Forward declaration of functions */ +static void uart_tx_dma_callback(int lch, u16 ch_status, void *data); +static void serial_omap_rx_timeout(unsigned long uart_no); +static int serial_omap_start_rxdma(struct uart_omap_port *up); + +static inline unsigned int serial_in(struct uart_omap_port *up, int offset) +{ + offset <<= up->port.regshift; + return readw(up->port.membase + offset); +} + +static inline void serial_out(struct uart_omap_port *up, int offset, int value) +{ + offset <<= up->port.regshift; + writew(value, up->port.membase + offset); +} + +static inline void serial_omap_clear_fifos(struct uart_omap_port *up) +{ + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); +} + +/* + * serial_omap_get_divisor - calculate divisor value + * @port: uart port info + * @baud: baudrate for which divisor needs to be calculated. + * + * We have written our own function to get the divisor so as to support + * 13x mode. 3Mbps Baudrate as an different divisor. + * Reference OMAP TRM Chapter 17: + * Table 17-1. UART Mode Baud Rates, Divisor Values, and Error Rates + * referring to oversampling - divisor value + * baudrate 460,800 to 3,686,400 all have divisor 13 + * except 3,000,000 which has divisor value 16 + */ +static unsigned int +serial_omap_get_divisor(struct uart_port *port, unsigned int baud) +{ + unsigned int divisor; + + if (baud > OMAP_MODE13X_SPEED && baud != 3000000) + divisor = 13; + else + divisor = 16; + return port->uartclk/(baud * divisor); +} + +static void serial_omap_stop_rxdma(struct uart_omap_port *up) +{ + if (up->uart_dma.rx_dma_used) { + del_timer(&up->uart_dma.rx_timer); + omap_stop_dma(up->uart_dma.rx_dma_channel); + omap_free_dma(up->uart_dma.rx_dma_channel); + up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; + up->uart_dma.rx_dma_used = false; + } +} + +static void serial_omap_enable_ms(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id); + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static void serial_omap_stop_tx(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + if (up->use_dma && + up->uart_dma.tx_dma_channel != OMAP_UART_DMA_CH_FREE) { + /* + * Check if dma is still active. If yes do nothing, + * return. Else stop dma + */ + if (omap_get_dma_active_status(up->uart_dma.tx_dma_channel)) + return; + omap_stop_dma(up->uart_dma.tx_dma_channel); + omap_free_dma(up->uart_dma.tx_dma_channel); + up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; + } + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_omap_stop_rx(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + if (up->use_dma) + serial_omap_stop_rxdma(up); + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static inline void receive_chars(struct uart_omap_port *up, int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned int flag; + unsigned char ch, lsr = *status; + int max_count = 256; + + do { + if (likely(lsr & UART_LSR_DR)) + ch = serial_in(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { + /* + * For statistics only + */ + if (lsr & UART_LSR_BI) { + lsr &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (lsr & UART_LSR_PE) { + up->port.icount.parity++; + } else if (lsr & UART_LSR_FE) { + up->port.icount.frame++; + } + + if (lsr & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ignored. + */ + lsr &= up->port.read_status_mask; + +#ifdef CONFIG_SERIAL_OMAP_CONSOLE + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + lsr |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } +#endif + if (lsr & UART_LSR_BI) + flag = TTY_BREAK; + else if (lsr & UART_LSR_PE) + flag = TTY_PARITY; + else if (lsr & UART_LSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); +ignore_char: + lsr = serial_in(up, UART_LSR); + } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0)); + spin_unlock(&up->port.lock); + tty_flip_buffer_push(tty); + spin_lock(&up->port.lock); +} + +static void transmit_chars(struct uart_omap_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_out(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_omap_stop_tx(&up->port); + return; + } + count = up->port.fifosize / 4; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + serial_omap_stop_tx(&up->port); +} + +static inline void serial_omap_enable_ier_thri(struct uart_omap_port *up) +{ + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_omap_start_tx(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + struct circ_buf *xmit; + unsigned int start; + int ret = 0; + + if (!up->use_dma) { + serial_omap_enable_ier_thri(up); + return; + } + + if (up->uart_dma.tx_dma_used) + return; + + xmit = &up->port.state->xmit; + + if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) { + ret = omap_request_dma(up->uart_dma.uart_dma_tx, + "UART Tx DMA", + (void *)uart_tx_dma_callback, up, + &(up->uart_dma.tx_dma_channel)); + + if (ret < 0) { + serial_omap_enable_ier_thri(up); + return; + } + } + spin_lock(&(up->uart_dma.tx_lock)); + up->uart_dma.tx_dma_used = true; + spin_unlock(&(up->uart_dma.tx_lock)); + + start = up->uart_dma.tx_buf_dma_phys + + (xmit->tail & (UART_XMIT_SIZE - 1)); + + up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit); + /* + * It is a circular buffer. See if the buffer has wounded back. + * If yes it will have to be transferred in two separate dma + * transfers + */ + if (start + up->uart_dma.tx_buf_size >= + up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) + up->uart_dma.tx_buf_size = + (up->uart_dma.tx_buf_dma_phys + + UART_XMIT_SIZE) - start; + + omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0, + OMAP_DMA_AMODE_CONSTANT, + up->uart_dma.uart_base, 0, 0); + omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0, + OMAP_DMA_AMODE_POST_INC, start, 0, 0); + omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel, + OMAP_DMA_DATA_TYPE_S8, + up->uart_dma.tx_buf_size, 1, + OMAP_DMA_SYNC_ELEMENT, + up->uart_dma.uart_dma_tx, 0); + /* FIXME: Cache maintenance needed here? */ + omap_start_dma(up->uart_dma.tx_dma_channel); +} + +static unsigned int check_modem_status(struct uart_omap_port *up) +{ + unsigned int status; + + status = serial_in(up, UART_MSR); + status |= up->msr_saved_flags; + up->msr_saved_flags = 0; + if ((status & UART_MSR_ANY_DELTA) == 0) + return status; + + if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI && + up->port.state != NULL) { + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change + (&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change + (&up->port, status & UART_MSR_CTS); + wake_up_interruptible(&up->port.state->port.delta_msr_wait); + } + + return status; +} + +/** + * serial_omap_irq() - This handles the interrupt from one port + * @irq: uart port irq number + * @dev_id: uart port info + */ +static inline irqreturn_t serial_omap_irq(int irq, void *dev_id) +{ + struct uart_omap_port *up = dev_id; + unsigned int iir, lsr; + unsigned long flags; + + iir = serial_in(up, UART_IIR); + if (iir & UART_IIR_NO_INT) + return IRQ_NONE; + + spin_lock_irqsave(&up->port.lock, flags); + lsr = serial_in(up, UART_LSR); + if (iir & UART_IIR_RLSI) { + if (!up->use_dma) { + if (lsr & UART_LSR_DR) + receive_chars(up, &lsr); + } else { + up->ier &= ~(UART_IER_RDI | UART_IER_RLSI); + serial_out(up, UART_IER, up->ier); + if ((serial_omap_start_rxdma(up) != 0) && + (lsr & UART_LSR_DR)) + receive_chars(up, &lsr); + } + } + + check_modem_status(up); + if ((lsr & UART_LSR_THRE) && (iir & UART_IIR_THRI)) + transmit_chars(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + up->port_activity = jiffies; + return IRQ_HANDLED; +} + +static unsigned int serial_omap_tx_empty(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned long flags = 0; + unsigned int ret = 0; + + dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id); + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_omap_get_mctrl(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned char status; + unsigned int ret = 0; + + status = check_modem_status(up); + dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id); + + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned char mcr = 0; + + dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->pdev->id); + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr |= up->mcr; + serial_out(up, UART_MCR, mcr); +} + +static void serial_omap_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned long flags = 0; + + dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id); + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int serial_omap_startup(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned long flags = 0; + int retval; + + /* + * Allocate the IRQ + */ + retval = request_irq(up->port.irq, serial_omap_irq, up->port.irqflags, + up->name, up); + if (retval) + return retval; + + dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id); + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial_omap_clear_fifos(up); + /* For Hardware flow control */ + serial_out(up, UART_MCR, UART_MCR_RTS); + + /* + * Clear the interrupt registers. + */ + (void) serial_in(up, UART_LSR); + if (serial_in(up, UART_LSR) & UART_LSR_DR) + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + /* + * Now, initialize the UART + */ + serial_out(up, UART_LCR, UART_LCR_WLEN8); + spin_lock_irqsave(&up->port.lock, flags); + /* + * Most PC uarts need OUT2 raised to enable interrupts. + */ + up->port.mctrl |= TIOCM_OUT2; + serial_omap_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + up->msr_saved_flags = 0; + if (up->use_dma) { + free_page((unsigned long)up->port.state->xmit.buf); + up->port.state->xmit.buf = dma_alloc_coherent(NULL, + UART_XMIT_SIZE, + (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys), + 0); + init_timer(&(up->uart_dma.rx_timer)); + up->uart_dma.rx_timer.function = serial_omap_rx_timeout; + up->uart_dma.rx_timer.data = up->pdev->id; + /* Currently the buffer size is 4KB. Can increase it */ + up->uart_dma.rx_buf = dma_alloc_coherent(NULL, + up->uart_dma.rx_buf_size, + (dma_addr_t *)&(up->uart_dma.rx_buf_dma_phys), 0); + } + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_out(up, UART_IER, up->ier); + + up->port_activity = jiffies; + return 0; +} + +static void serial_omap_shutdown(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned long flags = 0; + + dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id); + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_out(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl &= ~TIOCM_OUT2; + serial_omap_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); + serial_omap_clear_fifos(up); + + /* + * Read data port to reset things, and then free the irq + */ + if (serial_in(up, UART_LSR) & UART_LSR_DR) + (void) serial_in(up, UART_RX); + if (up->use_dma) { + dma_free_coherent(up->port.dev, + UART_XMIT_SIZE, up->port.state->xmit.buf, + up->uart_dma.tx_buf_dma_phys); + up->port.state->xmit.buf = NULL; + serial_omap_stop_rx(port); + dma_free_coherent(up->port.dev, + up->uart_dma.rx_buf_size, up->uart_dma.rx_buf, + up->uart_dma.rx_buf_dma_phys); + up->uart_dma.rx_buf = NULL; + } + free_irq(up->port.irq, up); +} + +static inline void +serial_omap_configure_xonxoff + (struct uart_omap_port *up, struct ktermios *termios) +{ + unsigned char efr = 0; + + up->lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + up->efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, up->efr & ~UART_EFR_ECB); + + serial_out(up, UART_XON1, termios->c_cc[VSTART]); + serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]); + + /* clear SW control mode bits */ + efr = up->efr; + efr &= OMAP_UART_SW_CLR; + + /* + * IXON Flag: + * Enable XON/XOFF flow control on output. + * Transmit XON1, XOFF1 + */ + if (termios->c_iflag & IXON) + efr |= OMAP_UART_SW_TX; + + /* + * IXOFF Flag: + * Enable XON/XOFF flow control on input. + * Receiver compares XON1, XOFF1. + */ + if (termios->c_iflag & IXOFF) + efr |= OMAP_UART_SW_RX; + + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + + up->mcr = serial_in(up, UART_MCR); + + /* + * IXANY Flag: + * Enable any character to restart output. + * Operation resumes after receiving any + * character after recognition of the XOFF character + */ + if (termios->c_iflag & IXANY) + up->mcr |= UART_MCR_XONANY; + + serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); + /* Enable special char function UARTi.EFR_REG[5] and + * load the new software flow control mode IXON or IXOFF + * and restore the UARTi.EFR_REG[4] ENHANCED_EN value. + */ + serial_out(up, UART_EFR, efr | UART_EFR_SCD); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + + serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR); + serial_out(up, UART_LCR, up->lcr); +} + +static void +serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned char cval = 0; + unsigned char efr = 0; + unsigned long flags = 0; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + + /* + * Ask the core to calculate the divisor for us. + */ + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13); + quot = serial_omap_get_divisor(port, baud); + + up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 | + UART_FCR_ENABLE_FIFO; + if (up->use_dma) + up->fcr |= UART_FCR_DMA_SELECT; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characters to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * Modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_LCR, cval); /* reset DLAB */ + + /* FIFOs and DMA Settings */ + + /* FCR can be changed only when the + * baud clock is not running + * DLL_REG and DLH_REG set to 0. + */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_DLL, 0); + serial_out(up, UART_DLM, 0); + serial_out(up, UART_LCR, 0); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + up->efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + up->mcr = serial_in(up, UART_MCR); + serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); + /* FIFO ENABLE, DMA MODE */ + serial_out(up, UART_FCR, up->fcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + if (up->use_dma) { + serial_out(up, UART_TI752_TLR, 0); + serial_out(up, UART_OMAP_SCR, + (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8)); + } + + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_MCR, up->mcr); + + /* Protocol, Baud Rate, and Interrupt Settings */ + + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + up->efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + + serial_out(up, UART_LCR, 0); + serial_out(up, UART_IER, 0); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ + serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + + serial_out(up, UART_LCR, 0); + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, cval); + + if (baud > 230400 && baud != 3000000) + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE); + else + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); + + /* Hardware Flow Control Configuration */ + + if (termios->c_cflag & CRTSCTS) { + efr |= (UART_EFR_CTS | UART_EFR_RTS); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + + up->mcr = serial_in(up, UART_MCR); + serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + up->efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); + + serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG); + serial_out(up, UART_EFR, efr); /* Enable AUTORTS and AUTOCTS */ + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_MCR, up->mcr | UART_MCR_RTS); + serial_out(up, UART_LCR, cval); + } + + serial_omap_set_mctrl(&up->port, up->port.mctrl); + /* Software Flow Control Configuration */ + if (termios->c_iflag & (IXON | IXOFF)) + serial_omap_configure_xonxoff(up, termios); + + spin_unlock_irqrestore(&up->port.lock, flags); + dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id); +} + +static void +serial_omap_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned char efr; + + dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, efr | UART_EFR_ECB); + serial_out(up, UART_LCR, 0); + + serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_EFR, efr); + serial_out(up, UART_LCR, 0); + /* Enable module level wake up */ + serial_out(up, UART_OMAP_WER, + (state != 0) ? OMAP_UART_WER_MOD_WKUP : 0); +} + +static void serial_omap_release_port(struct uart_port *port) +{ + dev_dbg(port->dev, "serial_omap_release_port+\n"); +} + +static int serial_omap_request_port(struct uart_port *port) +{ + dev_dbg(port->dev, "serial_omap_request_port+\n"); + return 0; +} + +static void serial_omap_config_port(struct uart_port *port, int flags) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + dev_dbg(up->port.dev, "serial_omap_config_port+%d\n", + up->pdev->id); + up->port.type = PORT_OMAP; +} + +static int +serial_omap_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + dev_dbg(port->dev, "serial_omap_verify_port+\n"); + return -EINVAL; +} + +static const char * +serial_omap_type(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->pdev->id); + return up->name; +} + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static inline void wait_for_xmitr(struct uart_omap_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + for (tmout = 1000000; tmout; tmout--) { + unsigned int msr = serial_in(up, UART_MSR); + + up->msr_saved_flags |= msr & MSR_SAVE_FLAGS; + if (msr & UART_MSR_CTS) + break; + + udelay(1); + } + } +} + +#ifdef CONFIG_CONSOLE_POLL + +static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +static int serial_omap_poll_get_char(struct uart_port *port) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + unsigned int status = serial_in(up, UART_LSR); + + if (!(status & UART_LSR_DR)) + return NO_POLL_CHAR; + + return serial_in(up, UART_RX); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +#ifdef CONFIG_SERIAL_OMAP_CONSOLE + +static struct uart_omap_port *serial_omap_console_ports[4]; + +static struct uart_driver serial_omap_reg; + +static void serial_omap_console_putchar(struct uart_port *port, int ch) +{ + struct uart_omap_port *up = (struct uart_omap_port *)port; + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +static void +serial_omap_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_omap_port *up = serial_omap_console_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + local_irq_save(flags); + if (up->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&up->port.lock); + else + spin_lock(&up->port.lock); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + + uart_console_write(&up->port, s, count, serial_omap_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); + /* + * The receive handling will happen properly because the + * receive ready bit will still be set; it is not cleared + * on read. However, modem control will not, we must + * call it if we have saved something in the saved flags + * while processing with interrupts off. + */ + if (up->msr_saved_flags) + check_modem_status(up); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static int __init +serial_omap_console_setup(struct console *co, char *options) +{ + struct uart_omap_port *up; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (serial_omap_console_ports[co->index] == NULL) + return -ENODEV; + up = serial_omap_console_ports[co->index]; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&up->port, co, baud, parity, bits, flow); +} + +static struct console serial_omap_console = { + .name = OMAP_SERIAL_NAME, + .write = serial_omap_console_write, + .device = uart_console_device, + .setup = serial_omap_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_omap_reg, +}; + +static void serial_omap_add_console_port(struct uart_omap_port *up) +{ + serial_omap_console_ports[up->pdev->id] = up; +} + +#define OMAP_CONSOLE (&serial_omap_console) + +#else + +#define OMAP_CONSOLE NULL + +static inline void serial_omap_add_console_port(struct uart_omap_port *up) +{} + +#endif + +static struct uart_ops serial_omap_pops = { + .tx_empty = serial_omap_tx_empty, + .set_mctrl = serial_omap_set_mctrl, + .get_mctrl = serial_omap_get_mctrl, + .stop_tx = serial_omap_stop_tx, + .start_tx = serial_omap_start_tx, + .stop_rx = serial_omap_stop_rx, + .enable_ms = serial_omap_enable_ms, + .break_ctl = serial_omap_break_ctl, + .startup = serial_omap_startup, + .shutdown = serial_omap_shutdown, + .set_termios = serial_omap_set_termios, + .pm = serial_omap_pm, + .type = serial_omap_type, + .release_port = serial_omap_release_port, + .request_port = serial_omap_request_port, + .config_port = serial_omap_config_port, + .verify_port = serial_omap_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_put_char = serial_omap_poll_put_char, + .poll_get_char = serial_omap_poll_get_char, +#endif +}; + +static struct uart_driver serial_omap_reg = { + .owner = THIS_MODULE, + .driver_name = "OMAP-SERIAL", + .dev_name = OMAP_SERIAL_NAME, + .nr = OMAP_MAX_HSUART_PORTS, + .cons = OMAP_CONSOLE, +}; + +static int +serial_omap_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct uart_omap_port *up = platform_get_drvdata(pdev); + + if (up) + uart_suspend_port(&serial_omap_reg, &up->port); + return 0; +} + +static int serial_omap_resume(struct platform_device *dev) +{ + struct uart_omap_port *up = platform_get_drvdata(dev); + + if (up) + uart_resume_port(&serial_omap_reg, &up->port); + return 0; +} + +static void serial_omap_rx_timeout(unsigned long uart_no) +{ + struct uart_omap_port *up = ui[uart_no]; + unsigned int curr_dma_pos, curr_transmitted_size; + int ret = 0; + + curr_dma_pos = omap_get_dma_dst_pos(up->uart_dma.rx_dma_channel); + if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) || + (curr_dma_pos == 0)) { + if (jiffies_to_msecs(jiffies - up->port_activity) < + RX_TIMEOUT) { + mod_timer(&up->uart_dma.rx_timer, jiffies + + usecs_to_jiffies(up->uart_dma.rx_timeout)); + } else { + serial_omap_stop_rxdma(up); + up->ier |= (UART_IER_RDI | UART_IER_RLSI); + serial_out(up, UART_IER, up->ier); + } + return; + } + + curr_transmitted_size = curr_dma_pos - + up->uart_dma.prev_rx_dma_pos; + up->port.icount.rx += curr_transmitted_size; + tty_insert_flip_string(up->port.state->port.tty, + up->uart_dma.rx_buf + + (up->uart_dma.prev_rx_dma_pos - + up->uart_dma.rx_buf_dma_phys), + curr_transmitted_size); + tty_flip_buffer_push(up->port.state->port.tty); + up->uart_dma.prev_rx_dma_pos = curr_dma_pos; + if (up->uart_dma.rx_buf_size + + up->uart_dma.rx_buf_dma_phys == curr_dma_pos) { + ret = serial_omap_start_rxdma(up); + if (ret < 0) { + serial_omap_stop_rxdma(up); + up->ier |= (UART_IER_RDI | UART_IER_RLSI); + serial_out(up, UART_IER, up->ier); + } + } else { + mod_timer(&up->uart_dma.rx_timer, jiffies + + usecs_to_jiffies(up->uart_dma.rx_timeout)); + } + up->port_activity = jiffies; +} + +static void uart_rx_dma_callback(int lch, u16 ch_status, void *data) +{ + return; +} + +static int serial_omap_start_rxdma(struct uart_omap_port *up) +{ + int ret = 0; + + if (up->uart_dma.rx_dma_channel == -1) { + ret = omap_request_dma(up->uart_dma.uart_dma_rx, + "UART Rx DMA", + (void *)uart_rx_dma_callback, up, + &(up->uart_dma.rx_dma_channel)); + if (ret < 0) + return ret; + + omap_set_dma_src_params(up->uart_dma.rx_dma_channel, 0, + OMAP_DMA_AMODE_CONSTANT, + up->uart_dma.uart_base, 0, 0); + omap_set_dma_dest_params(up->uart_dma.rx_dma_channel, 0, + OMAP_DMA_AMODE_POST_INC, + up->uart_dma.rx_buf_dma_phys, 0, 0); + omap_set_dma_transfer_params(up->uart_dma.rx_dma_channel, + OMAP_DMA_DATA_TYPE_S8, + up->uart_dma.rx_buf_size, 1, + OMAP_DMA_SYNC_ELEMENT, + up->uart_dma.uart_dma_rx, 0); + } + up->uart_dma.prev_rx_dma_pos = up->uart_dma.rx_buf_dma_phys; + /* FIXME: Cache maintenance needed here? */ + omap_start_dma(up->uart_dma.rx_dma_channel); + mod_timer(&up->uart_dma.rx_timer, jiffies + + usecs_to_jiffies(up->uart_dma.rx_timeout)); + up->uart_dma.rx_dma_used = true; + return ret; +} + +static void serial_omap_continue_tx(struct uart_omap_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + unsigned int start = up->uart_dma.tx_buf_dma_phys + + (xmit->tail & (UART_XMIT_SIZE - 1)); + + if (uart_circ_empty(xmit)) + return; + + up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit); + /* + * It is a circular buffer. See if the buffer has wounded back. + * If yes it will have to be transferred in two separate dma + * transfers + */ + if (start + up->uart_dma.tx_buf_size >= + up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) + up->uart_dma.tx_buf_size = + (up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - start; + omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0, + OMAP_DMA_AMODE_CONSTANT, + up->uart_dma.uart_base, 0, 0); + omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0, + OMAP_DMA_AMODE_POST_INC, start, 0, 0); + omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel, + OMAP_DMA_DATA_TYPE_S8, + up->uart_dma.tx_buf_size, 1, + OMAP_DMA_SYNC_ELEMENT, + up->uart_dma.uart_dma_tx, 0); + /* FIXME: Cache maintenance needed here? */ + omap_start_dma(up->uart_dma.tx_dma_channel); +} + +static void uart_tx_dma_callback(int lch, u16 ch_status, void *data) +{ + struct uart_omap_port *up = (struct uart_omap_port *)data; + struct circ_buf *xmit = &up->port.state->xmit; + + xmit->tail = (xmit->tail + up->uart_dma.tx_buf_size) & \ + (UART_XMIT_SIZE - 1); + up->port.icount.tx += up->uart_dma.tx_buf_size; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) { + spin_lock(&(up->uart_dma.tx_lock)); + serial_omap_stop_tx(&up->port); + up->uart_dma.tx_dma_used = false; + spin_unlock(&(up->uart_dma.tx_lock)); + } else { + omap_stop_dma(up->uart_dma.tx_dma_channel); + serial_omap_continue_tx(up); + } + up->port_activity = jiffies; + return; +} + +static int serial_omap_probe(struct platform_device *pdev) +{ + struct uart_omap_port *up; + struct resource *mem, *irq, *dma_tx, *dma_rx; + struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data; + int ret = -ENOSPC; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&pdev->dev, "no mem resource?\n"); + return -ENODEV; + } + + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq) { + dev_err(&pdev->dev, "no irq resource?\n"); + return -ENODEV; + } + + if (!request_mem_region(mem->start, (mem->end - mem->start) + 1, + pdev->dev.driver->name)) { + dev_err(&pdev->dev, "memory region already claimed\n"); + return -EBUSY; + } + + dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); + if (!dma_rx) { + ret = -EINVAL; + goto err; + } + + dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); + if (!dma_tx) { + ret = -EINVAL; + goto err; + } + + up = kzalloc(sizeof(*up), GFP_KERNEL); + if (up == NULL) { + ret = -ENOMEM; + goto do_release_region; + } + sprintf(up->name, "OMAP UART%d", pdev->id); + up->pdev = pdev; + up->port.dev = &pdev->dev; + up->port.type = PORT_OMAP; + up->port.iotype = UPIO_MEM; + up->port.irq = irq->start; + + up->port.regshift = 2; + up->port.fifosize = 64; + up->port.ops = &serial_omap_pops; + up->port.line = pdev->id; + + up->port.membase = omap_up_info->membase; + up->port.mapbase = omap_up_info->mapbase; + up->port.flags = omap_up_info->flags; + up->port.irqflags = omap_up_info->irqflags; + up->port.uartclk = omap_up_info->uartclk; + up->uart_dma.uart_base = mem->start; + + if (omap_up_info->dma_enabled) { + up->uart_dma.uart_dma_tx = dma_tx->start; + up->uart_dma.uart_dma_rx = dma_rx->start; + up->use_dma = 1; + up->uart_dma.rx_buf_size = 4096; + up->uart_dma.rx_timeout = 2; + spin_lock_init(&(up->uart_dma.tx_lock)); + spin_lock_init(&(up->uart_dma.rx_lock)); + up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; + up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; + } + + ui[pdev->id] = up; + serial_omap_add_console_port(up); + + ret = uart_add_one_port(&serial_omap_reg, &up->port); + if (ret != 0) + goto do_release_region; + + platform_set_drvdata(pdev, up); + return 0; +err: + dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n", + pdev->id, __func__, ret); +do_release_region: + release_mem_region(mem->start, (mem->end - mem->start) + 1); + return ret; +} + +static int serial_omap_remove(struct platform_device *dev) +{ + struct uart_omap_port *up = platform_get_drvdata(dev); + + platform_set_drvdata(dev, NULL); + if (up) { + uart_remove_one_port(&serial_omap_reg, &up->port); + kfree(up); + } + return 0; +} + +static struct platform_driver serial_omap_driver = { + .probe = serial_omap_probe, + .remove = serial_omap_remove, + + .suspend = serial_omap_suspend, + .resume = serial_omap_resume, + .driver = { + .name = DRIVER_NAME, + }, +}; + +static int __init serial_omap_init(void) +{ + int ret; + + ret = uart_register_driver(&serial_omap_reg); + if (ret != 0) + return ret; + ret = platform_driver_register(&serial_omap_driver); + if (ret != 0) + uart_unregister_driver(&serial_omap_reg); + return ret; +} + +static void __exit serial_omap_exit(void) +{ + platform_driver_unregister(&serial_omap_driver); + uart_unregister_driver(&serial_omap_reg); +} + +module_init(serial_omap_init); +module_exit(serial_omap_exit); + +MODULE_DESCRIPTION("OMAP High Speed UART driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments Inc"); diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c new file mode 100644 index 000000000000..70a61458ec42 --- /dev/null +++ b/drivers/tty/serial/pch_uart.c @@ -0,0 +1,1451 @@ +/* + *Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. + * + *This program is free software; you can redistribute it and/or modify + *it under the terms of the GNU General Public License as published by + *the Free Software Foundation; version 2 of the License. + * + *This program is distributed in the hope that it will be useful, + *but WITHOUT ANY WARRANTY; without even the implied warranty of + *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + *GNU General Public License for more details. + * + *You should have received a copy of the GNU General Public License + *along with this program; if not, write to the Free Software + *Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +enum { + PCH_UART_HANDLED_RX_INT_SHIFT, + PCH_UART_HANDLED_TX_INT_SHIFT, + PCH_UART_HANDLED_RX_ERR_INT_SHIFT, + PCH_UART_HANDLED_RX_TRG_INT_SHIFT, + PCH_UART_HANDLED_MS_INT_SHIFT, +}; + +enum { + PCH_UART_8LINE, + PCH_UART_2LINE, +}; + +#define PCH_UART_DRIVER_DEVICE "ttyPCH" + +#define PCH_UART_NR_GE_256FIFO 1 +#define PCH_UART_NR_GE_64FIFO 3 +#define PCH_UART_NR_GE (PCH_UART_NR_GE_256FIFO+PCH_UART_NR_GE_64FIFO) +#define PCH_UART_NR PCH_UART_NR_GE + +#define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1)) +#define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1)) +#define PCH_UART_HANDLED_RX_ERR_INT (1<<((\ + PCH_UART_HANDLED_RX_ERR_INT_SHIFT)<<1)) +#define PCH_UART_HANDLED_RX_TRG_INT (1<<((\ + PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1)) +#define PCH_UART_HANDLED_MS_INT (1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1)) + +#define PCH_UART_RBR 0x00 +#define PCH_UART_THR 0x00 + +#define PCH_UART_IER_MASK (PCH_UART_IER_ERBFI|PCH_UART_IER_ETBEI|\ + PCH_UART_IER_ELSI|PCH_UART_IER_EDSSI) +#define PCH_UART_IER_ERBFI 0x00000001 +#define PCH_UART_IER_ETBEI 0x00000002 +#define PCH_UART_IER_ELSI 0x00000004 +#define PCH_UART_IER_EDSSI 0x00000008 + +#define PCH_UART_IIR_IP 0x00000001 +#define PCH_UART_IIR_IID 0x00000006 +#define PCH_UART_IIR_MSI 0x00000000 +#define PCH_UART_IIR_TRI 0x00000002 +#define PCH_UART_IIR_RRI 0x00000004 +#define PCH_UART_IIR_REI 0x00000006 +#define PCH_UART_IIR_TOI 0x00000008 +#define PCH_UART_IIR_FIFO256 0x00000020 +#define PCH_UART_IIR_FIFO64 PCH_UART_IIR_FIFO256 +#define PCH_UART_IIR_FE 0x000000C0 + +#define PCH_UART_FCR_FIFOE 0x00000001 +#define PCH_UART_FCR_RFR 0x00000002 +#define PCH_UART_FCR_TFR 0x00000004 +#define PCH_UART_FCR_DMS 0x00000008 +#define PCH_UART_FCR_FIFO256 0x00000020 +#define PCH_UART_FCR_RFTL 0x000000C0 + +#define PCH_UART_FCR_RFTL1 0x00000000 +#define PCH_UART_FCR_RFTL64 0x00000040 +#define PCH_UART_FCR_RFTL128 0x00000080 +#define PCH_UART_FCR_RFTL224 0x000000C0 +#define PCH_UART_FCR_RFTL16 PCH_UART_FCR_RFTL64 +#define PCH_UART_FCR_RFTL32 PCH_UART_FCR_RFTL128 +#define PCH_UART_FCR_RFTL56 PCH_UART_FCR_RFTL224 +#define PCH_UART_FCR_RFTL4 PCH_UART_FCR_RFTL64 +#define PCH_UART_FCR_RFTL8 PCH_UART_FCR_RFTL128 +#define PCH_UART_FCR_RFTL14 PCH_UART_FCR_RFTL224 +#define PCH_UART_FCR_RFTL_SHIFT 6 + +#define PCH_UART_LCR_WLS 0x00000003 +#define PCH_UART_LCR_STB 0x00000004 +#define PCH_UART_LCR_PEN 0x00000008 +#define PCH_UART_LCR_EPS 0x00000010 +#define PCH_UART_LCR_SP 0x00000020 +#define PCH_UART_LCR_SB 0x00000040 +#define PCH_UART_LCR_DLAB 0x00000080 +#define PCH_UART_LCR_NP 0x00000000 +#define PCH_UART_LCR_OP PCH_UART_LCR_PEN +#define PCH_UART_LCR_EP (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS) +#define PCH_UART_LCR_1P (PCH_UART_LCR_PEN | PCH_UART_LCR_SP) +#define PCH_UART_LCR_0P (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS |\ + PCH_UART_LCR_SP) + +#define PCH_UART_LCR_5BIT 0x00000000 +#define PCH_UART_LCR_6BIT 0x00000001 +#define PCH_UART_LCR_7BIT 0x00000002 +#define PCH_UART_LCR_8BIT 0x00000003 + +#define PCH_UART_MCR_DTR 0x00000001 +#define PCH_UART_MCR_RTS 0x00000002 +#define PCH_UART_MCR_OUT 0x0000000C +#define PCH_UART_MCR_LOOP 0x00000010 +#define PCH_UART_MCR_AFE 0x00000020 + +#define PCH_UART_LSR_DR 0x00000001 +#define PCH_UART_LSR_ERR (1<<7) + +#define PCH_UART_MSR_DCTS 0x00000001 +#define PCH_UART_MSR_DDSR 0x00000002 +#define PCH_UART_MSR_TERI 0x00000004 +#define PCH_UART_MSR_DDCD 0x00000008 +#define PCH_UART_MSR_CTS 0x00000010 +#define PCH_UART_MSR_DSR 0x00000020 +#define PCH_UART_MSR_RI 0x00000040 +#define PCH_UART_MSR_DCD 0x00000080 +#define PCH_UART_MSR_DELTA (PCH_UART_MSR_DCTS | PCH_UART_MSR_DDSR |\ + PCH_UART_MSR_TERI | PCH_UART_MSR_DDCD) + +#define PCH_UART_DLL 0x00 +#define PCH_UART_DLM 0x01 + +#define DIV_ROUND(a, b) (((a) + ((b)/2)) / (b)) + +#define PCH_UART_IID_RLS (PCH_UART_IIR_REI) +#define PCH_UART_IID_RDR (PCH_UART_IIR_RRI) +#define PCH_UART_IID_RDR_TO (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI) +#define PCH_UART_IID_THRE (PCH_UART_IIR_TRI) +#define PCH_UART_IID_MS (PCH_UART_IIR_MSI) + +#define PCH_UART_HAL_PARITY_NONE (PCH_UART_LCR_NP) +#define PCH_UART_HAL_PARITY_ODD (PCH_UART_LCR_OP) +#define PCH_UART_HAL_PARITY_EVEN (PCH_UART_LCR_EP) +#define PCH_UART_HAL_PARITY_FIX1 (PCH_UART_LCR_1P) +#define PCH_UART_HAL_PARITY_FIX0 (PCH_UART_LCR_0P) +#define PCH_UART_HAL_5BIT (PCH_UART_LCR_5BIT) +#define PCH_UART_HAL_6BIT (PCH_UART_LCR_6BIT) +#define PCH_UART_HAL_7BIT (PCH_UART_LCR_7BIT) +#define PCH_UART_HAL_8BIT (PCH_UART_LCR_8BIT) +#define PCH_UART_HAL_STB1 0 +#define PCH_UART_HAL_STB2 (PCH_UART_LCR_STB) + +#define PCH_UART_HAL_CLR_TX_FIFO (PCH_UART_FCR_TFR) +#define PCH_UART_HAL_CLR_RX_FIFO (PCH_UART_FCR_RFR) +#define PCH_UART_HAL_CLR_ALL_FIFO (PCH_UART_HAL_CLR_TX_FIFO | \ + PCH_UART_HAL_CLR_RX_FIFO) + +#define PCH_UART_HAL_DMA_MODE0 0 +#define PCH_UART_HAL_FIFO_DIS 0 +#define PCH_UART_HAL_FIFO16 (PCH_UART_FCR_FIFOE) +#define PCH_UART_HAL_FIFO256 (PCH_UART_FCR_FIFOE | \ + PCH_UART_FCR_FIFO256) +#define PCH_UART_HAL_FIFO64 (PCH_UART_HAL_FIFO256) +#define PCH_UART_HAL_TRIGGER1 (PCH_UART_FCR_RFTL1) +#define PCH_UART_HAL_TRIGGER64 (PCH_UART_FCR_RFTL64) +#define PCH_UART_HAL_TRIGGER128 (PCH_UART_FCR_RFTL128) +#define PCH_UART_HAL_TRIGGER224 (PCH_UART_FCR_RFTL224) +#define PCH_UART_HAL_TRIGGER16 (PCH_UART_FCR_RFTL16) +#define PCH_UART_HAL_TRIGGER32 (PCH_UART_FCR_RFTL32) +#define PCH_UART_HAL_TRIGGER56 (PCH_UART_FCR_RFTL56) +#define PCH_UART_HAL_TRIGGER4 (PCH_UART_FCR_RFTL4) +#define PCH_UART_HAL_TRIGGER8 (PCH_UART_FCR_RFTL8) +#define PCH_UART_HAL_TRIGGER14 (PCH_UART_FCR_RFTL14) +#define PCH_UART_HAL_TRIGGER_L (PCH_UART_FCR_RFTL64) +#define PCH_UART_HAL_TRIGGER_M (PCH_UART_FCR_RFTL128) +#define PCH_UART_HAL_TRIGGER_H (PCH_UART_FCR_RFTL224) + +#define PCH_UART_HAL_RX_INT (PCH_UART_IER_ERBFI) +#define PCH_UART_HAL_TX_INT (PCH_UART_IER_ETBEI) +#define PCH_UART_HAL_RX_ERR_INT (PCH_UART_IER_ELSI) +#define PCH_UART_HAL_MS_INT (PCH_UART_IER_EDSSI) +#define PCH_UART_HAL_ALL_INT (PCH_UART_IER_MASK) + +#define PCH_UART_HAL_DTR (PCH_UART_MCR_DTR) +#define PCH_UART_HAL_RTS (PCH_UART_MCR_RTS) +#define PCH_UART_HAL_OUT (PCH_UART_MCR_OUT) +#define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP) +#define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE) + +struct pch_uart_buffer { + unsigned char *buf; + int size; +}; + +struct eg20t_port { + struct uart_port port; + int port_type; + void __iomem *membase; + resource_size_t mapbase; + unsigned int iobase; + struct pci_dev *pdev; + int fifo_size; + int base_baud; + int start_tx; + int start_rx; + int tx_empty; + int int_dis_flag; + int trigger; + int trigger_level; + struct pch_uart_buffer rxbuf; + unsigned int dmsr; + unsigned int fcr; + unsigned int use_dma; + unsigned int use_dma_flag; + struct dma_async_tx_descriptor *desc_tx; + struct dma_async_tx_descriptor *desc_rx; + struct pch_dma_slave param_tx; + struct pch_dma_slave param_rx; + struct dma_chan *chan_tx; + struct dma_chan *chan_rx; + struct scatterlist sg_tx; + struct scatterlist sg_rx; + int tx_dma_use; + void *rx_buf_virt; + dma_addr_t rx_buf_dma; +}; + +static unsigned int default_baud = 9600; +static const int trigger_level_256[4] = { 1, 64, 128, 224 }; +static const int trigger_level_64[4] = { 1, 16, 32, 56 }; +static const int trigger_level_16[4] = { 1, 4, 8, 14 }; +static const int trigger_level_1[4] = { 1, 1, 1, 1 }; + +static void pch_uart_hal_request(struct pci_dev *pdev, int fifosize, + int base_baud) +{ + struct eg20t_port *priv = pci_get_drvdata(pdev); + + priv->trigger_level = 1; + priv->fcr = 0; +} + +static unsigned int get_msr(struct eg20t_port *priv, void __iomem *base) +{ + unsigned int msr = ioread8(base + UART_MSR); + priv->dmsr |= msr & PCH_UART_MSR_DELTA; + + return msr; +} + +static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv, + unsigned int flag) +{ + u8 ier = ioread8(priv->membase + UART_IER); + ier |= flag & PCH_UART_IER_MASK; + iowrite8(ier, priv->membase + UART_IER); +} + +static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv, + unsigned int flag) +{ + u8 ier = ioread8(priv->membase + UART_IER); + ier &= ~(flag & PCH_UART_IER_MASK); + iowrite8(ier, priv->membase + UART_IER); +} + +static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud, + unsigned int parity, unsigned int bits, + unsigned int stb) +{ + unsigned int dll, dlm, lcr; + int div; + + div = DIV_ROUND(priv->base_baud / 16, baud); + if (div < 0 || USHRT_MAX <= div) { + pr_err("Invalid Baud(div=0x%x)\n", div); + return -EINVAL; + } + + dll = (unsigned int)div & 0x00FFU; + dlm = ((unsigned int)div >> 8) & 0x00FFU; + + if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) { + pr_err("Invalid parity(0x%x)\n", parity); + return -EINVAL; + } + + if (bits & ~PCH_UART_LCR_WLS) { + pr_err("Invalid bits(0x%x)\n", bits); + return -EINVAL; + } + + if (stb & ~PCH_UART_LCR_STB) { + pr_err("Invalid STB(0x%x)\n", stb); + return -EINVAL; + } + + lcr = parity; + lcr |= bits; + lcr |= stb; + + pr_debug("%s:baud = %d, div = %04x, lcr = %02x (%lu)\n", + __func__, baud, div, lcr, jiffies); + iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR); + iowrite8(dll, priv->membase + PCH_UART_DLL); + iowrite8(dlm, priv->membase + PCH_UART_DLM); + iowrite8(lcr, priv->membase + UART_LCR); + + return 0; +} + +static int pch_uart_hal_fifo_reset(struct eg20t_port *priv, + unsigned int flag) +{ + if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) { + pr_err("%s:Invalid flag(0x%x)\n", __func__, flag); + return -EINVAL; + } + + iowrite8(PCH_UART_FCR_FIFOE | priv->fcr, priv->membase + UART_FCR); + iowrite8(PCH_UART_FCR_FIFOE | priv->fcr | flag, + priv->membase + UART_FCR); + iowrite8(priv->fcr, priv->membase + UART_FCR); + + return 0; +} + +static int pch_uart_hal_set_fifo(struct eg20t_port *priv, + unsigned int dmamode, + unsigned int fifo_size, unsigned int trigger) +{ + u8 fcr; + + if (dmamode & ~PCH_UART_FCR_DMS) { + pr_err("%s:Invalid DMA Mode(0x%x)\n", __func__, dmamode); + return -EINVAL; + } + + if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) { + pr_err("%s:Invalid FIFO SIZE(0x%x)\n", __func__, fifo_size); + return -EINVAL; + } + + if (trigger & ~PCH_UART_FCR_RFTL) { + pr_err("%s:Invalid TRIGGER(0x%x)\n", __func__, trigger); + return -EINVAL; + } + + switch (priv->fifo_size) { + case 256: + priv->trigger_level = + trigger_level_256[trigger >> PCH_UART_FCR_RFTL_SHIFT]; + break; + case 64: + priv->trigger_level = + trigger_level_64[trigger >> PCH_UART_FCR_RFTL_SHIFT]; + break; + case 16: + priv->trigger_level = + trigger_level_16[trigger >> PCH_UART_FCR_RFTL_SHIFT]; + break; + default: + priv->trigger_level = + trigger_level_1[trigger >> PCH_UART_FCR_RFTL_SHIFT]; + break; + } + fcr = + dmamode | fifo_size | trigger | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR; + iowrite8(PCH_UART_FCR_FIFOE, priv->membase + UART_FCR); + iowrite8(PCH_UART_FCR_FIFOE | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR, + priv->membase + UART_FCR); + iowrite8(fcr, priv->membase + UART_FCR); + priv->fcr = fcr; + + return 0; +} + +static u8 pch_uart_hal_get_modem(struct eg20t_port *priv) +{ + priv->dmsr = 0; + return get_msr(priv, priv->membase); +} + +static int pch_uart_hal_write(struct eg20t_port *priv, + const unsigned char *buf, int tx_size) +{ + int i; + unsigned int thr; + + for (i = 0; i < tx_size;) { + thr = buf[i++]; + iowrite8(thr, priv->membase + PCH_UART_THR); + } + return i; +} + +static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf, + int rx_size) +{ + int i; + u8 rbr, lsr; + + lsr = ioread8(priv->membase + UART_LSR); + for (i = 0, lsr = ioread8(priv->membase + UART_LSR); + i < rx_size && lsr & UART_LSR_DR; + lsr = ioread8(priv->membase + UART_LSR)) { + rbr = ioread8(priv->membase + PCH_UART_RBR); + buf[i++] = rbr; + } + return i; +} + +static unsigned int pch_uart_hal_get_iid(struct eg20t_port *priv) +{ + unsigned int iir; + int ret; + + iir = ioread8(priv->membase + UART_IIR); + ret = (iir & (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP)); + return ret; +} + +static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv) +{ + return ioread8(priv->membase + UART_LSR); +} + +static void pch_uart_hal_set_break(struct eg20t_port *priv, int on) +{ + unsigned int lcr; + + lcr = ioread8(priv->membase + UART_LCR); + if (on) + lcr |= PCH_UART_LCR_SB; + else + lcr &= ~PCH_UART_LCR_SB; + + iowrite8(lcr, priv->membase + UART_LCR); +} + +static int push_rx(struct eg20t_port *priv, const unsigned char *buf, + int size) +{ + struct uart_port *port; + struct tty_struct *tty; + + port = &priv->port; + tty = tty_port_tty_get(&port->state->port); + if (!tty) { + pr_debug("%s:tty is busy now", __func__); + return -EBUSY; + } + + tty_insert_flip_string(tty, buf, size); + tty_flip_buffer_push(tty); + tty_kref_put(tty); + + return 0; +} + +static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf) +{ + int ret; + struct uart_port *port = &priv->port; + + if (port->x_char) { + pr_debug("%s:X character send %02x (%lu)\n", __func__, + port->x_char, jiffies); + buf[0] = port->x_char; + port->x_char = 0; + ret = 1; + } else { + ret = 0; + } + + return ret; +} + +static int dma_push_rx(struct eg20t_port *priv, int size) +{ + struct tty_struct *tty; + int room; + struct uart_port *port = &priv->port; + + port = &priv->port; + tty = tty_port_tty_get(&port->state->port); + if (!tty) { + pr_debug("%s:tty is busy now", __func__); + return 0; + } + + room = tty_buffer_request_room(tty, size); + + if (room < size) + dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", + size - room); + if (!room) + return room; + + tty_insert_flip_string(tty, sg_virt(&priv->sg_rx), size); + + port->icount.rx += room; + tty_kref_put(tty); + + return room; +} + +static void pch_free_dma(struct uart_port *port) +{ + struct eg20t_port *priv; + priv = container_of(port, struct eg20t_port, port); + + if (priv->chan_tx) { + dma_release_channel(priv->chan_tx); + priv->chan_tx = NULL; + } + if (priv->chan_rx) { + dma_release_channel(priv->chan_rx); + priv->chan_rx = NULL; + } + if (sg_dma_address(&priv->sg_rx)) + dma_free_coherent(port->dev, port->fifosize, + sg_virt(&priv->sg_rx), + sg_dma_address(&priv->sg_rx)); + + return; +} + +static bool filter(struct dma_chan *chan, void *slave) +{ + struct pch_dma_slave *param = slave; + + if ((chan->chan_id == param->chan_id) && (param->dma_dev == + chan->device->dev)) { + chan->private = param; + return true; + } else { + return false; + } +} + +static void pch_request_dma(struct uart_port *port) +{ + dma_cap_mask_t mask; + struct dma_chan *chan; + struct pci_dev *dma_dev; + struct pch_dma_slave *param; + struct eg20t_port *priv = + container_of(port, struct eg20t_port, port); + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(0xa, 0)); /* Get DMA's dev + information */ + /* Set Tx DMA */ + param = &priv->param_tx; + param->dma_dev = &dma_dev->dev; + param->chan_id = priv->port.line; + param->tx_reg = port->mapbase + UART_TX; + chan = dma_request_channel(mask, filter, param); + if (!chan) { + pr_err("%s:dma_request_channel FAILS(Tx)\n", __func__); + return; + } + priv->chan_tx = chan; + + /* Set Rx DMA */ + param = &priv->param_rx; + param->dma_dev = &dma_dev->dev; + param->chan_id = priv->port.line + 1; /* Rx = Tx + 1 */ + param->rx_reg = port->mapbase + UART_RX; + chan = dma_request_channel(mask, filter, param); + if (!chan) { + pr_err("%s:dma_request_channel FAILS(Rx)\n", __func__); + dma_release_channel(priv->chan_tx); + return; + } + + /* Get Consistent memory for DMA */ + priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize, + &priv->rx_buf_dma, GFP_KERNEL); + priv->chan_rx = chan; +} + +static void pch_dma_rx_complete(void *arg) +{ + struct eg20t_port *priv = arg; + struct uart_port *port = &priv->port; + struct tty_struct *tty = tty_port_tty_get(&port->state->port); + + if (!tty) { + pr_debug("%s:tty is busy now", __func__); + return; + } + + if (dma_push_rx(priv, priv->trigger_level)) + tty_flip_buffer_push(tty); + + tty_kref_put(tty); +} + +static void pch_dma_tx_complete(void *arg) +{ + struct eg20t_port *priv = arg; + struct uart_port *port = &priv->port; + struct circ_buf *xmit = &port->state->xmit; + + xmit->tail += sg_dma_len(&priv->sg_tx); + xmit->tail &= UART_XMIT_SIZE - 1; + port->icount.tx += sg_dma_len(&priv->sg_tx); + + async_tx_ack(priv->desc_tx); + priv->tx_dma_use = 0; +} + +static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size) +{ + int count = 0; + struct uart_port *port = &priv->port; + struct circ_buf *xmit = &port->state->xmit; + + if (uart_tx_stopped(port) || uart_circ_empty(xmit) || count >= size) + goto pop_tx_end; + + do { + int cnt_to_end = + CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + int sz = min(size - count, cnt_to_end); + memcpy(&buf[count], &xmit->buf[xmit->tail], sz); + xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1); + count += sz; + } while (!uart_circ_empty(xmit) && count < size); + +pop_tx_end: + pr_debug("%d characters. Remained %d characters. (%lu)\n", + count, size - count, jiffies); + + return count; +} + +static int handle_rx_to(struct eg20t_port *priv) +{ + struct pch_uart_buffer *buf; + int rx_size; + int ret; + if (!priv->start_rx) { + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT); + return 0; + } + buf = &priv->rxbuf; + do { + rx_size = pch_uart_hal_read(priv, buf->buf, buf->size); + ret = push_rx(priv, buf->buf, rx_size); + if (ret) + return 0; + } while (rx_size == buf->size); + + return PCH_UART_HANDLED_RX_INT; +} + +static int handle_rx(struct eg20t_port *priv) +{ + return handle_rx_to(priv); +} + +static int dma_handle_rx(struct eg20t_port *priv) +{ + struct uart_port *port = &priv->port; + struct dma_async_tx_descriptor *desc; + struct scatterlist *sg; + + priv = container_of(port, struct eg20t_port, port); + sg = &priv->sg_rx; + + sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */ + + sg_dma_len(sg) = priv->fifo_size; + + sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt), + sg_dma_len(sg), (unsigned long)priv->rx_buf_virt & + ~PAGE_MASK); + + sg_dma_address(sg) = priv->rx_buf_dma; + + desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx, + sg, 1, DMA_FROM_DEVICE, + DMA_PREP_INTERRUPT); + if (!desc) + return 0; + + priv->desc_rx = desc; + desc->callback = pch_dma_rx_complete; + desc->callback_param = priv; + desc->tx_submit(desc); + dma_async_issue_pending(priv->chan_rx); + + return PCH_UART_HANDLED_RX_INT; +} + +static unsigned int handle_tx(struct eg20t_port *priv) +{ + struct uart_port *port = &priv->port; + struct circ_buf *xmit = &port->state->xmit; + int ret; + int fifo_size; + int tx_size; + int size; + int tx_empty; + + if (!priv->start_tx) { + pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + priv->tx_empty = 1; + return 0; + } + + fifo_size = max(priv->fifo_size, 1); + tx_empty = 1; + if (pop_tx_x(priv, xmit->buf)) { + pch_uart_hal_write(priv, xmit->buf, 1); + port->icount.tx++; + tx_empty = 0; + fifo_size--; + } + size = min(xmit->head - xmit->tail, fifo_size); + tx_size = pop_tx(priv, xmit->buf, size); + if (tx_size > 0) { + ret = pch_uart_hal_write(priv, xmit->buf, tx_size); + port->icount.tx += ret; + tx_empty = 0; + } + + priv->tx_empty = tx_empty; + + if (tx_empty) + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + + return PCH_UART_HANDLED_TX_INT; +} + +static unsigned int dma_handle_tx(struct eg20t_port *priv) +{ + struct uart_port *port = &priv->port; + struct circ_buf *xmit = &port->state->xmit; + struct scatterlist *sg = &priv->sg_tx; + int nent; + int fifo_size; + int tx_empty; + struct dma_async_tx_descriptor *desc; + + if (!priv->start_tx) { + pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + priv->tx_empty = 1; + return 0; + } + + fifo_size = max(priv->fifo_size, 1); + tx_empty = 1; + if (pop_tx_x(priv, xmit->buf)) { + pch_uart_hal_write(priv, xmit->buf, 1); + port->icount.tx++; + tx_empty = 0; + fifo_size--; + } + + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT); + + priv->tx_dma_use = 1; + + sg_init_table(&priv->sg_tx, 1); /* Initialize SG table */ + + sg_set_page(&priv->sg_tx, virt_to_page(xmit->buf), + UART_XMIT_SIZE, (int)xmit->buf & ~PAGE_MASK); + + nent = dma_map_sg(port->dev, &priv->sg_tx, 1, DMA_TO_DEVICE); + if (!nent) { + pr_err("%s:dma_map_sg Failed\n", __func__); + return 0; + } + + sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); + sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + + sg->offset; + sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, + UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head, + xmit->tail, UART_XMIT_SIZE)); + + desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx, + sg, nent, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + pr_err("%s:device_prep_slave_sg Failed\n", __func__); + return 0; + } + + dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); + + priv->desc_tx = desc; + desc->callback = pch_dma_tx_complete; + desc->callback_param = priv; + + desc->tx_submit(desc); + + dma_async_issue_pending(priv->chan_tx); + + return PCH_UART_HANDLED_TX_INT; +} + +static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr) +{ + u8 fcr = ioread8(priv->membase + UART_FCR); + + /* Reset FIFO */ + fcr |= UART_FCR_CLEAR_RCVR; + iowrite8(fcr, priv->membase + UART_FCR); + + if (lsr & PCH_UART_LSR_ERR) + dev_err(&priv->pdev->dev, "Error data in FIFO\n"); + + if (lsr & UART_LSR_FE) + dev_err(&priv->pdev->dev, "Framing Error\n"); + + if (lsr & UART_LSR_PE) + dev_err(&priv->pdev->dev, "Parity Error\n"); + + if (lsr & UART_LSR_OE) + dev_err(&priv->pdev->dev, "Overrun Error\n"); +} + +static irqreturn_t pch_uart_interrupt(int irq, void *dev_id) +{ + struct eg20t_port *priv = dev_id; + unsigned int handled; + u8 lsr; + int ret = 0; + unsigned int iid; + unsigned long flags; + + spin_lock_irqsave(&priv->port.lock, flags); + handled = 0; + while ((iid = pch_uart_hal_get_iid(priv)) > 1) { + switch (iid) { + case PCH_UART_IID_RLS: /* Receiver Line Status */ + lsr = pch_uart_hal_get_line_status(priv); + if (lsr & (PCH_UART_LSR_ERR | UART_LSR_FE | + UART_LSR_PE | UART_LSR_OE)) { + pch_uart_err_ir(priv, lsr); + ret = PCH_UART_HANDLED_RX_ERR_INT; + } + break; + case PCH_UART_IID_RDR: /* Received Data Ready */ + if (priv->use_dma) + ret = dma_handle_rx(priv); + else + ret = handle_rx(priv); + break; + case PCH_UART_IID_RDR_TO: /* Received Data Ready + (FIFO Timeout) */ + ret = handle_rx_to(priv); + break; + case PCH_UART_IID_THRE: /* Transmitter Holding Register + Empty */ + if (priv->use_dma) + ret = dma_handle_tx(priv); + else + ret = handle_tx(priv); + break; + case PCH_UART_IID_MS: /* Modem Status */ + ret = PCH_UART_HANDLED_MS_INT; + break; + default: /* Never junp to this label */ + pr_err("%s:iid=%d (%lu)\n", __func__, iid, jiffies); + ret = -1; + break; + } + handled |= (unsigned int)ret; + } + if (handled == 0 && iid <= 1) { + if (priv->int_dis_flag) + priv->int_dis_flag = 0; + } + + spin_unlock_irqrestore(&priv->port.lock, flags); + return IRQ_RETVAL(handled); +} + +/* This function tests whether the transmitter fifo and shifter for the port + described by 'port' is empty. */ +static unsigned int pch_uart_tx_empty(struct uart_port *port) +{ + struct eg20t_port *priv; + int ret; + priv = container_of(port, struct eg20t_port, port); + if (priv->tx_empty) + ret = TIOCSER_TEMT; + else + ret = 0; + + return ret; +} + +/* Returns the current state of modem control inputs. */ +static unsigned int pch_uart_get_mctrl(struct uart_port *port) +{ + struct eg20t_port *priv; + u8 modem; + unsigned int ret = 0; + + priv = container_of(port, struct eg20t_port, port); + modem = pch_uart_hal_get_modem(priv); + + if (modem & UART_MSR_DCD) + ret |= TIOCM_CAR; + + if (modem & UART_MSR_RI) + ret |= TIOCM_RNG; + + if (modem & UART_MSR_DSR) + ret |= TIOCM_DSR; + + if (modem & UART_MSR_CTS) + ret |= TIOCM_CTS; + + return ret; +} + +static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + u32 mcr = 0; + unsigned int dat; + struct eg20t_port *priv = container_of(port, struct eg20t_port, port); + + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + if (mctrl) { + dat = pch_uart_get_mctrl(port); + dat |= mcr; + iowrite8(dat, priv->membase + UART_MCR); + } +} + +static void pch_uart_stop_tx(struct uart_port *port) +{ + struct eg20t_port *priv; + priv = container_of(port, struct eg20t_port, port); + priv->start_tx = 0; + priv->tx_dma_use = 0; +} + +static void pch_uart_start_tx(struct uart_port *port) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + + if (priv->use_dma) + if (priv->tx_dma_use) + return; + + priv->start_tx = 1; + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT); +} + +static void pch_uart_stop_rx(struct uart_port *port) +{ + struct eg20t_port *priv; + priv = container_of(port, struct eg20t_port, port); + priv->start_rx = 0; + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT); + priv->int_dis_flag = 1; +} + +/* Enable the modem status interrupts. */ +static void pch_uart_enable_ms(struct uart_port *port) +{ + struct eg20t_port *priv; + priv = container_of(port, struct eg20t_port, port); + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_MS_INT); +} + +/* Control the transmission of a break signal. */ +static void pch_uart_break_ctl(struct uart_port *port, int ctl) +{ + struct eg20t_port *priv; + unsigned long flags; + + priv = container_of(port, struct eg20t_port, port); + spin_lock_irqsave(&port->lock, flags); + pch_uart_hal_set_break(priv, ctl); + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Grab any interrupt resources and initialise any low level driver state. */ +static int pch_uart_startup(struct uart_port *port) +{ + struct eg20t_port *priv; + int ret; + int fifo_size; + int trigger_level; + + priv = container_of(port, struct eg20t_port, port); + priv->tx_empty = 1; + port->uartclk = priv->base_baud; + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); + ret = pch_uart_hal_set_line(priv, default_baud, + PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT, + PCH_UART_HAL_STB1); + if (ret) + return ret; + + switch (priv->fifo_size) { + case 256: + fifo_size = PCH_UART_HAL_FIFO256; + break; + case 64: + fifo_size = PCH_UART_HAL_FIFO64; + break; + case 16: + fifo_size = PCH_UART_HAL_FIFO16; + case 1: + default: + fifo_size = PCH_UART_HAL_FIFO_DIS; + break; + } + + switch (priv->trigger) { + case PCH_UART_HAL_TRIGGER1: + trigger_level = 1; + break; + case PCH_UART_HAL_TRIGGER_L: + trigger_level = priv->fifo_size / 4; + break; + case PCH_UART_HAL_TRIGGER_M: + trigger_level = priv->fifo_size / 2; + break; + case PCH_UART_HAL_TRIGGER_H: + default: + trigger_level = priv->fifo_size - (priv->fifo_size / 8); + break; + } + + priv->trigger_level = trigger_level; + ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0, + fifo_size, priv->trigger); + if (ret < 0) + return ret; + + ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED, + KBUILD_MODNAME, priv); + if (ret < 0) + return ret; + + if (priv->use_dma) + pch_request_dma(port); + + priv->start_rx = 1; + pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT); + uart_update_timeout(port, CS8, default_baud); + + return 0; +} + +static void pch_uart_shutdown(struct uart_port *port) +{ + struct eg20t_port *priv; + int ret; + + priv = container_of(port, struct eg20t_port, port); + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); + pch_uart_hal_fifo_reset(priv, PCH_UART_HAL_CLR_ALL_FIFO); + ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0, + PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1); + if (ret) + pr_err("pch_uart_hal_set_fifo Failed(ret=%d)\n", ret); + + if (priv->use_dma_flag) + pch_free_dma(port); + + free_irq(priv->port.irq, priv); +} + +/* Change the port parameters, including word length, parity, stop + *bits. Update read_status_mask and ignore_status_mask to indicate + *the types of events we are interested in receiving. */ +static void pch_uart_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + int baud; + int rtn; + unsigned int parity, bits, stb; + struct eg20t_port *priv; + unsigned long flags; + + priv = container_of(port, struct eg20t_port, port); + switch (termios->c_cflag & CSIZE) { + case CS5: + bits = PCH_UART_HAL_5BIT; + break; + case CS6: + bits = PCH_UART_HAL_6BIT; + break; + case CS7: + bits = PCH_UART_HAL_7BIT; + break; + default: /* CS8 */ + bits = PCH_UART_HAL_8BIT; + break; + } + if (termios->c_cflag & CSTOPB) + stb = PCH_UART_HAL_STB2; + else + stb = PCH_UART_HAL_STB1; + + if (termios->c_cflag & PARENB) { + if (!(termios->c_cflag & PARODD)) + parity = PCH_UART_HAL_PARITY_ODD; + else + parity = PCH_UART_HAL_PARITY_EVEN; + + } else { + parity = PCH_UART_HAL_PARITY_NONE; + } + termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + + spin_lock_irqsave(&port->lock, flags); + + uart_update_timeout(port, termios->c_cflag, baud); + rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb); + if (rtn) + goto out; + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + +out: + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *pch_uart_type(struct uart_port *port) +{ + return KBUILD_MODNAME; +} + +static void pch_uart_release_port(struct uart_port *port) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + pci_iounmap(priv->pdev, priv->membase); + pci_release_regions(priv->pdev); +} + +static int pch_uart_request_port(struct uart_port *port) +{ + struct eg20t_port *priv; + int ret; + void __iomem *membase; + + priv = container_of(port, struct eg20t_port, port); + ret = pci_request_regions(priv->pdev, KBUILD_MODNAME); + if (ret < 0) + return -EBUSY; + + membase = pci_iomap(priv->pdev, 1, 0); + if (!membase) { + pci_release_regions(priv->pdev); + return -EBUSY; + } + priv->membase = port->membase = membase; + + return 0; +} + +static void pch_uart_config_port(struct uart_port *port, int type) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + if (type & UART_CONFIG_TYPE) { + port->type = priv->port_type; + pch_uart_request_port(port); + } +} + +static int pch_uart_verify_port(struct uart_port *port, + struct serial_struct *serinfo) +{ + struct eg20t_port *priv; + + priv = container_of(port, struct eg20t_port, port); + if (serinfo->flags & UPF_LOW_LATENCY) { + pr_info("PCH UART : Use PIO Mode (without DMA)\n"); + priv->use_dma = 0; + serinfo->flags &= ~UPF_LOW_LATENCY; + } else { +#ifndef CONFIG_PCH_DMA + pr_err("%s : PCH DMA is not Loaded.\n", __func__); + return -EOPNOTSUPP; +#endif + priv->use_dma = 1; + priv->use_dma_flag = 1; + pr_info("PCH UART : Use DMA Mode\n"); + } + + return 0; +} + +static struct uart_ops pch_uart_ops = { + .tx_empty = pch_uart_tx_empty, + .set_mctrl = pch_uart_set_mctrl, + .get_mctrl = pch_uart_get_mctrl, + .stop_tx = pch_uart_stop_tx, + .start_tx = pch_uart_start_tx, + .stop_rx = pch_uart_stop_rx, + .enable_ms = pch_uart_enable_ms, + .break_ctl = pch_uart_break_ctl, + .startup = pch_uart_startup, + .shutdown = pch_uart_shutdown, + .set_termios = pch_uart_set_termios, +/* .pm = pch_uart_pm, Not supported yet */ +/* .set_wake = pch_uart_set_wake, Not supported yet */ + .type = pch_uart_type, + .release_port = pch_uart_release_port, + .request_port = pch_uart_request_port, + .config_port = pch_uart_config_port, + .verify_port = pch_uart_verify_port +}; + +static struct uart_driver pch_uart_driver = { + .owner = THIS_MODULE, + .driver_name = KBUILD_MODNAME, + .dev_name = PCH_UART_DRIVER_DEVICE, + .major = 0, + .minor = 0, + .nr = PCH_UART_NR, +}; + +static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, + int port_type) +{ + struct eg20t_port *priv; + int ret; + unsigned int iobase; + unsigned int mapbase; + unsigned char *rxbuf; + int fifosize, base_baud; + static int num; + + priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL); + if (priv == NULL) + goto init_port_alloc_err; + + rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL); + if (!rxbuf) + goto init_port_free_txbuf; + + switch (port_type) { + case PORT_UNKNOWN: + fifosize = 256; /* UART0 */ + base_baud = 1843200; /* 1.8432MHz */ + break; + case PORT_8250: + fifosize = 64; /* UART1~3 */ + base_baud = 1843200; /* 1.8432MHz */ + break; + default: + dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type); + goto init_port_hal_free; + } + + iobase = pci_resource_start(pdev, 0); + mapbase = pci_resource_start(pdev, 1); + priv->mapbase = mapbase; + priv->iobase = iobase; + priv->pdev = pdev; + priv->tx_empty = 1; + priv->rxbuf.buf = rxbuf; + priv->rxbuf.size = PAGE_SIZE; + + priv->fifo_size = fifosize; + priv->base_baud = base_baud; + priv->port_type = PORT_MAX_8250 + port_type + 1; + priv->port.dev = &pdev->dev; + priv->port.iobase = iobase; + priv->port.membase = NULL; + priv->port.mapbase = mapbase; + priv->port.irq = pdev->irq; + priv->port.iotype = UPIO_PORT; + priv->port.ops = &pch_uart_ops; + priv->port.flags = UPF_BOOT_AUTOCONF; + priv->port.fifosize = fifosize; + priv->port.line = num++; + priv->trigger = PCH_UART_HAL_TRIGGER_M; + + pci_set_drvdata(pdev, priv); + pch_uart_hal_request(pdev, fifosize, base_baud); + ret = uart_add_one_port(&pch_uart_driver, &priv->port); + if (ret < 0) + goto init_port_hal_free; + + return priv; + +init_port_hal_free: + free_page((unsigned long)rxbuf); +init_port_free_txbuf: + kfree(priv); +init_port_alloc_err: + + return NULL; +} + +static void pch_uart_exit_port(struct eg20t_port *priv) +{ + uart_remove_one_port(&pch_uart_driver, &priv->port); + pci_set_drvdata(priv->pdev, NULL); + free_page((unsigned long)priv->rxbuf.buf); +} + +static void pch_uart_pci_remove(struct pci_dev *pdev) +{ + struct eg20t_port *priv; + + priv = (struct eg20t_port *)pci_get_drvdata(pdev); + pch_uart_exit_port(priv); + pci_disable_device(pdev); + kfree(priv); + return; +} +#ifdef CONFIG_PM +static int pch_uart_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct eg20t_port *priv = pci_get_drvdata(pdev); + + uart_suspend_port(&pch_uart_driver, &priv->port); + + pci_save_state(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + return 0; +} + +static int pch_uart_pci_resume(struct pci_dev *pdev) +{ + struct eg20t_port *priv = pci_get_drvdata(pdev); + int ret; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + ret = pci_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, + "%s-pci_enable_device failed(ret=%d) ", __func__, ret); + return ret; + } + + uart_resume_port(&pch_uart_driver, &priv->port); + + return 0; +} +#else +#define pch_uart_pci_suspend NULL +#define pch_uart_pci_resume NULL +#endif + +static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811), + .driver_data = PCH_UART_8LINE}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812), + .driver_data = PCH_UART_2LINE}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813), + .driver_data = PCH_UART_2LINE}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814), + .driver_data = PCH_UART_2LINE}, + {0,}, +}; + +static int __devinit pch_uart_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int ret; + struct eg20t_port *priv; + + ret = pci_enable_device(pdev); + if (ret < 0) + goto probe_error; + + priv = pch_uart_init_port(pdev, id->driver_data); + if (!priv) { + ret = -EBUSY; + goto probe_disable_device; + } + pci_set_drvdata(pdev, priv); + + return ret; + +probe_disable_device: + pci_disable_device(pdev); +probe_error: + return ret; +} + +static struct pci_driver pch_uart_pci_driver = { + .name = "pch_uart", + .id_table = pch_uart_pci_id, + .probe = pch_uart_pci_probe, + .remove = __devexit_p(pch_uart_pci_remove), + .suspend = pch_uart_pci_suspend, + .resume = pch_uart_pci_resume, +}; + +static int __init pch_uart_module_init(void) +{ + int ret; + + /* register as UART driver */ + ret = uart_register_driver(&pch_uart_driver); + if (ret < 0) + return ret; + + /* register as PCI driver */ + ret = pci_register_driver(&pch_uart_pci_driver); + if (ret < 0) + uart_unregister_driver(&pch_uart_driver); + + return ret; +} +module_init(pch_uart_module_init); + +static void __exit pch_uart_module_exit(void) +{ + pci_unregister_driver(&pch_uart_pci_driver); + uart_unregister_driver(&pch_uart_driver); +} +module_exit(pch_uart_module_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver"); +module_param(default_baud, uint, S_IRUGO); diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c new file mode 100644 index 000000000000..5b9cde79e4ea --- /dev/null +++ b/drivers/tty/serial/pmac_zilog.c @@ -0,0 +1,2208 @@ +/* + * linux/drivers/serial/pmac_zilog.c + * + * Driver for PowerMac Z85c30 based ESCC cell found in the + * "macio" ASICs of various PowerMac models + * + * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * Derived from drivers/macintosh/macserial.c by Paul Mackerras + * and drivers/serial/sunzilog.c by David S. Miller + * + * Hrm... actually, I ripped most of sunzilog (Thanks David !) and + * adapted special tweaks needed for us. I don't think it's worth + * merging back those though. The DMA code still has to get in + * and once done, I expect that driver to remain fairly stable in + * the long term, unless we change the driver model again... + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * 2004-08-06 Harald Welte + * - Enable BREAK interrupt + * - Add support for sysreq + * + * TODO: - Add DMA support + * - Defer port shutdown to a few seconds after close + * - maybe put something right into uap->clk_divisor + */ + +#undef DEBUG +#undef DEBUG_HARD +#undef USE_CTRL_O_SYSRQ + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_PPC_PMAC +#include +#include +#include +#include +#include +#else +#include +#define of_machine_is_compatible(x) (0) +#endif + +#if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include + +#include "pmac_zilog.h" + +/* Not yet implemented */ +#undef HAS_DBDMA + +static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt )"; +MODULE_AUTHOR("Benjamin Herrenschmidt "); +MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports."); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_SERIAL_PMACZILOG_TTYS +#define PMACZILOG_MAJOR TTY_MAJOR +#define PMACZILOG_MINOR 64 +#define PMACZILOG_NAME "ttyS" +#else +#define PMACZILOG_MAJOR 204 +#define PMACZILOG_MINOR 192 +#define PMACZILOG_NAME "ttyPZ" +#endif + + +/* + * For the sake of early serial console, we can do a pre-probe + * (optional) of the ports at rather early boot time. + */ +static struct uart_pmac_port pmz_ports[MAX_ZS_PORTS]; +static int pmz_ports_count; +static DEFINE_MUTEX(pmz_irq_mutex); + +static struct uart_driver pmz_uart_reg = { + .owner = THIS_MODULE, + .driver_name = PMACZILOG_NAME, + .dev_name = PMACZILOG_NAME, + .major = PMACZILOG_MAJOR, + .minor = PMACZILOG_MINOR, +}; + + +/* + * Load all registers to reprogram the port + * This function must only be called when the TX is not busy. The UART + * port lock must be held and local interrupts disabled. + */ +static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs) +{ + int i; + + if (ZS_IS_ASLEEP(uap)) + return; + + /* Let pending transmits finish. */ + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(uap, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + ZS_CLEARERR(uap); + zssync(uap); + ZS_CLEARFIFO(uap); + zssync(uap); + ZS_CLEARERR(uap); + + /* Disable all interrupts. */ + write_zsreg(uap, R1, + regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); + + /* Set parity, sync config, stop bits, and clock divisor. */ + write_zsreg(uap, R4, regs[R4]); + + /* Set misc. TX/RX control bits. */ + write_zsreg(uap, R10, regs[R10]); + + /* Set TX/RX controls sans the enable bits. */ + write_zsreg(uap, R3, regs[R3] & ~RxENABLE); + write_zsreg(uap, R5, regs[R5] & ~TxENABLE); + + /* now set R7 "prime" on ESCC */ + write_zsreg(uap, R15, regs[R15] | EN85C30); + write_zsreg(uap, R7, regs[R7P]); + + /* make sure we use R7 "non-prime" on ESCC */ + write_zsreg(uap, R15, regs[R15] & ~EN85C30); + + /* Synchronous mode config. */ + write_zsreg(uap, R6, regs[R6]); + write_zsreg(uap, R7, regs[R7]); + + /* Disable baud generator. */ + write_zsreg(uap, R14, regs[R14] & ~BRENAB); + + /* Clock mode control. */ + write_zsreg(uap, R11, regs[R11]); + + /* Lower and upper byte of baud rate generator divisor. */ + write_zsreg(uap, R12, regs[R12]); + write_zsreg(uap, R13, regs[R13]); + + /* Now rewrite R14, with BRENAB (if set). */ + write_zsreg(uap, R14, regs[R14]); + + /* Reset external status interrupts. */ + write_zsreg(uap, R0, RES_EXT_INT); + write_zsreg(uap, R0, RES_EXT_INT); + + /* Rewrite R3/R5, this time without enables masked. */ + write_zsreg(uap, R3, regs[R3]); + write_zsreg(uap, R5, regs[R5]); + + /* Rewrite R1, this time without IRQ enabled masked. */ + write_zsreg(uap, R1, regs[R1]); + + /* Enable interrupts */ + write_zsreg(uap, R9, regs[R9]); +} + +/* + * We do like sunzilog to avoid disrupting pending Tx + * Reprogram the Zilog channel HW registers with the copies found in the + * software state struct. If the transmitter is busy, we defer this update + * until the next TX complete interrupt. Else, we do it right now. + * + * The UART port lock must be held and local interrupts disabled. + */ +static void pmz_maybe_update_regs(struct uart_pmac_port *uap) +{ + if (!ZS_REGS_HELD(uap)) { + if (ZS_TX_ACTIVE(uap)) { + uap->flags |= PMACZILOG_FLAG_REGS_HELD; + } else { + pmz_debug("pmz: maybe_update_regs: updating\n"); + pmz_load_zsregs(uap, uap->curregs); + } + } +} + +static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) +{ + struct tty_struct *tty = NULL; + unsigned char ch, r1, drop, error, flag; + int loops = 0; + + /* The interrupt can be enabled when the port isn't open, typically + * that happens when using one port is open and the other closed (stale + * interrupt) or when one port is used as a console. + */ + if (!ZS_IS_OPEN(uap)) { + pmz_debug("pmz: draining input\n"); + /* Port is closed, drain input data */ + for (;;) { + if ((++loops) > 1000) + goto flood; + (void)read_zsreg(uap, R1); + write_zsreg(uap, R0, ERR_RES); + (void)read_zsdata(uap); + ch = read_zsreg(uap, R0); + if (!(ch & Rx_CH_AV)) + break; + } + return NULL; + } + + /* Sanity check, make sure the old bug is no longer happening */ + if (uap->port.state == NULL || uap->port.state->port.tty == NULL) { + WARN_ON(1); + (void)read_zsdata(uap); + return NULL; + } + tty = uap->port.state->port.tty; + + while (1) { + error = 0; + drop = 0; + + r1 = read_zsreg(uap, R1); + ch = read_zsdata(uap); + + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + write_zsreg(uap, R0, ERR_RES); + zssync(uap); + } + + ch &= uap->parity_mask; + if (ch == 0 && uap->flags & PMACZILOG_FLAG_BREAK) { + uap->flags &= ~PMACZILOG_FLAG_BREAK; + } + +#if defined(CONFIG_MAGIC_SYSRQ) && defined(CONFIG_SERIAL_CORE_CONSOLE) +#ifdef USE_CTRL_O_SYSRQ + /* Handle the SysRq ^O Hack */ + if (ch == '\x0f') { + uap->port.sysrq = jiffies + HZ*5; + goto next_char; + } +#endif /* USE_CTRL_O_SYSRQ */ + if (uap->port.sysrq) { + int swallow; + spin_unlock(&uap->port.lock); + swallow = uart_handle_sysrq_char(&uap->port, ch); + spin_lock(&uap->port.lock); + if (swallow) + goto next_char; + } +#endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */ + + /* A real serial line, record the character and status. */ + if (drop) + goto next_char; + + flag = TTY_NORMAL; + uap->port.icount.rx++; + + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | BRK_ABRT)) { + error = 1; + if (r1 & BRK_ABRT) { + pmz_debug("pmz: got break !\n"); + r1 &= ~(PAR_ERR | CRC_ERR); + uap->port.icount.brk++; + if (uart_handle_break(&uap->port)) + goto next_char; + } + else if (r1 & PAR_ERR) + uap->port.icount.parity++; + else if (r1 & CRC_ERR) + uap->port.icount.frame++; + if (r1 & Rx_OVR) + uap->port.icount.overrun++; + r1 &= uap->port.read_status_mask; + if (r1 & BRK_ABRT) + flag = TTY_BREAK; + else if (r1 & PAR_ERR) + flag = TTY_PARITY; + else if (r1 & CRC_ERR) + flag = TTY_FRAME; + } + + if (uap->port.ignore_status_mask == 0xff || + (r1 & uap->port.ignore_status_mask) == 0) { + tty_insert_flip_char(tty, ch, flag); + } + if (r1 & Rx_OVR) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + next_char: + /* We can get stuck in an infinite loop getting char 0 when the + * line is in a wrong HW state, we break that here. + * When that happens, I disable the receive side of the driver. + * Note that what I've been experiencing is a real irq loop where + * I'm getting flooded regardless of the actual port speed. + * Something stange is going on with the HW + */ + if ((++loops) > 1000) + goto flood; + ch = read_zsreg(uap, R0); + if (!(ch & Rx_CH_AV)) + break; + } + + return tty; + flood: + uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + write_zsreg(uap, R1, uap->curregs[R1]); + zssync(uap); + pmz_error("pmz: rx irq flood !\n"); + return tty; +} + +static void pmz_status_handle(struct uart_pmac_port *uap) +{ + unsigned char status; + + status = read_zsreg(uap, R0); + write_zsreg(uap, R0, RES_EXT_INT); + zssync(uap); + + if (ZS_IS_OPEN(uap) && ZS_WANTS_MODEM_STATUS(uap)) { + if (status & SYNC_HUNT) + uap->port.icount.dsr++; + + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. + * But it does not tell us which bit has changed, we have to keep + * track of this ourselves. + * The CTS input is inverted for some reason. -- paulus + */ + if ((status ^ uap->prev_status) & DCD) + uart_handle_dcd_change(&uap->port, + (status & DCD)); + if ((status ^ uap->prev_status) & CTS) + uart_handle_cts_change(&uap->port, + !(status & CTS)); + + wake_up_interruptible(&uap->port.state->port.delta_msr_wait); + } + + if (status & BRK_ABRT) + uap->flags |= PMACZILOG_FLAG_BREAK; + + uap->prev_status = status; +} + +static void pmz_transmit_chars(struct uart_pmac_port *uap) +{ + struct circ_buf *xmit; + + if (ZS_IS_ASLEEP(uap)) + return; + if (ZS_IS_CONS(uap)) { + unsigned char status = read_zsreg(uap, R0); + + /* TX still busy? Just wait for the next TX done interrupt. + * + * It can occur because of how we do serial console writes. It would + * be nice to transmit console writes just like we normally would for + * a TTY line. (ie. buffered and TX interrupt driven). That is not + * easy because console writes cannot sleep. One solution might be + * to poll on enough port->xmit space becomming free. -DaveM + */ + if (!(status & Tx_BUF_EMP)) + return; + } + + uap->flags &= ~PMACZILOG_FLAG_TX_ACTIVE; + + if (ZS_REGS_HELD(uap)) { + pmz_load_zsregs(uap, uap->curregs); + uap->flags &= ~PMACZILOG_FLAG_REGS_HELD; + } + + if (ZS_TX_STOPPED(uap)) { + uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED; + goto ack_tx_int; + } + + /* Under some circumstances, we see interrupts reported for + * a closed channel. The interrupt mask in R1 is clear, but + * R3 still signals the interrupts and we see them when taking + * an interrupt for the other channel (this could be a qemu + * bug but since the ESCC doc doesn't specify precsiely whether + * R3 interrup status bits are masked by R1 interrupt enable + * bits, better safe than sorry). --BenH. + */ + if (!ZS_IS_OPEN(uap)) + goto ack_tx_int; + + if (uap->port.x_char) { + uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; + write_zsdata(uap, uap->port.x_char); + zssync(uap); + uap->port.icount.tx++; + uap->port.x_char = 0; + return; + } + + if (uap->port.state == NULL) + goto ack_tx_int; + xmit = &uap->port.state->xmit; + if (uart_circ_empty(xmit)) { + uart_write_wakeup(&uap->port); + goto ack_tx_int; + } + if (uart_tx_stopped(&uap->port)) + goto ack_tx_int; + + uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; + write_zsdata(uap, xmit->buf[xmit->tail]); + zssync(uap); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + + return; + +ack_tx_int: + write_zsreg(uap, R0, RES_Tx_P); + zssync(uap); +} + +/* Hrm... we register that twice, fixme later.... */ +static irqreturn_t pmz_interrupt(int irq, void *dev_id) +{ + struct uart_pmac_port *uap = dev_id; + struct uart_pmac_port *uap_a; + struct uart_pmac_port *uap_b; + int rc = IRQ_NONE; + struct tty_struct *tty; + u8 r3; + + uap_a = pmz_get_port_A(uap); + uap_b = uap_a->mate; + + spin_lock(&uap_a->port.lock); + r3 = read_zsreg(uap_a, R3); + +#ifdef DEBUG_HARD + pmz_debug("irq, r3: %x\n", r3); +#endif + /* Channel A */ + tty = NULL; + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + write_zsreg(uap_a, R0, RES_H_IUS); + zssync(uap_a); + if (r3 & CHAEXT) + pmz_status_handle(uap_a); + if (r3 & CHARxIP) + tty = pmz_receive_chars(uap_a); + if (r3 & CHATxIP) + pmz_transmit_chars(uap_a); + rc = IRQ_HANDLED; + } + spin_unlock(&uap_a->port.lock); + if (tty != NULL) + tty_flip_buffer_push(tty); + + if (uap_b->node == NULL) + goto out; + + spin_lock(&uap_b->port.lock); + tty = NULL; + if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { + write_zsreg(uap_b, R0, RES_H_IUS); + zssync(uap_b); + if (r3 & CHBEXT) + pmz_status_handle(uap_b); + if (r3 & CHBRxIP) + tty = pmz_receive_chars(uap_b); + if (r3 & CHBTxIP) + pmz_transmit_chars(uap_b); + rc = IRQ_HANDLED; + } + spin_unlock(&uap_b->port.lock); + if (tty != NULL) + tty_flip_buffer_push(tty); + + out: +#ifdef DEBUG_HARD + pmz_debug("irq done.\n"); +#endif + return rc; +} + +/* + * Peek the status register, lock not held by caller + */ +static inline u8 pmz_peek_status(struct uart_pmac_port *uap) +{ + unsigned long flags; + u8 status; + + spin_lock_irqsave(&uap->port.lock, flags); + status = read_zsreg(uap, R0); + spin_unlock_irqrestore(&uap->port.lock, flags); + + return status; +} + +/* + * Check if transmitter is empty + * The port lock is not held. + */ +static unsigned int pmz_tx_empty(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char status; + + if (ZS_IS_ASLEEP(uap) || uap->node == NULL) + return TIOCSER_TEMT; + + status = pmz_peek_status(to_pmz(port)); + if (status & Tx_BUF_EMP) + return TIOCSER_TEMT; + return 0; +} + +/* + * Set Modem Control (RTS & DTR) bits + * The port lock is held and interrupts are disabled. + * Note: Shall we really filter out RTS on external ports or + * should that be dealt at higher level only ? + */ +static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char set_bits, clear_bits; + + /* Do nothing for irda for now... */ + if (ZS_IS_IRDA(uap)) + return; + /* We get called during boot with a port not up yet */ + if (ZS_IS_ASLEEP(uap) || + !(ZS_IS_OPEN(uap) || ZS_IS_CONS(uap))) + return; + + set_bits = clear_bits = 0; + + if (ZS_IS_INTMODEM(uap)) { + if (mctrl & TIOCM_RTS) + set_bits |= RTS; + else + clear_bits |= RTS; + } + if (mctrl & TIOCM_DTR) + set_bits |= DTR; + else + clear_bits |= DTR; + + /* NOTE: Not subject to 'transmitter active' rule. */ + uap->curregs[R5] |= set_bits; + uap->curregs[R5] &= ~clear_bits; + if (ZS_IS_ASLEEP(uap)) + return; + write_zsreg(uap, R5, uap->curregs[R5]); + pmz_debug("pmz_set_mctrl: set bits: %x, clear bits: %x -> %x\n", + set_bits, clear_bits, uap->curregs[R5]); + zssync(uap); +} + +/* + * Get Modem Control bits (only the input ones, the core will + * or that with a cached value of the control ones) + * The port lock is held and interrupts are disabled. + */ +static unsigned int pmz_get_mctrl(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char status; + unsigned int ret; + + if (ZS_IS_ASLEEP(uap) || uap->node == NULL) + return 0; + + status = read_zsreg(uap, R0); + + ret = 0; + if (status & DCD) + ret |= TIOCM_CAR; + if (status & SYNC_HUNT) + ret |= TIOCM_DSR; + if (!(status & CTS)) + ret |= TIOCM_CTS; + + return ret; +} + +/* + * Stop TX side. Dealt like sunzilog at next Tx interrupt, + * though for DMA, we will have to do a bit more. + * The port lock is held and interrupts are disabled. + */ +static void pmz_stop_tx(struct uart_port *port) +{ + to_pmz(port)->flags |= PMACZILOG_FLAG_TX_STOPPED; +} + +/* + * Kick the Tx side. + * The port lock is held and interrupts are disabled. + */ +static void pmz_start_tx(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char status; + + pmz_debug("pmz: start_tx()\n"); + + uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; + uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED; + + if (ZS_IS_ASLEEP(uap) || uap->node == NULL) + return; + + status = read_zsreg(uap, R0); + + /* TX busy? Just wait for the TX done interrupt. */ + if (!(status & Tx_BUF_EMP)) + return; + + /* Send the first character to jump-start the TX done + * IRQ sending engine. + */ + if (port->x_char) { + write_zsdata(uap, port->x_char); + zssync(uap); + port->icount.tx++; + port->x_char = 0; + } else { + struct circ_buf *xmit = &port->state->xmit; + + write_zsdata(uap, xmit->buf[xmit->tail]); + zssync(uap); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + } + pmz_debug("pmz: start_tx() done.\n"); +} + +/* + * Stop Rx side, basically disable emitting of + * Rx interrupts on the port. We don't disable the rx + * side of the chip proper though + * The port lock is held. + */ +static void pmz_stop_rx(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + + if (ZS_IS_ASLEEP(uap) || uap->node == NULL) + return; + + pmz_debug("pmz: stop_rx()()\n"); + + /* Disable all RX interrupts. */ + uap->curregs[R1] &= ~RxINT_MASK; + pmz_maybe_update_regs(uap); + + pmz_debug("pmz: stop_rx() done.\n"); +} + +/* + * Enable modem status change interrupts + * The port lock is held. + */ +static void pmz_enable_ms(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char new_reg; + + if (ZS_IS_IRDA(uap) || uap->node == NULL) + return; + new_reg = uap->curregs[R15] | (DCDIE | SYNCIE | CTSIE); + if (new_reg != uap->curregs[R15]) { + uap->curregs[R15] = new_reg; + + if (ZS_IS_ASLEEP(uap)) + return; + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(uap, R15, uap->curregs[R15]); + } +} + +/* + * Control break state emission + * The port lock is not held. + */ +static void pmz_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char set_bits, clear_bits, new_reg; + unsigned long flags; + + if (uap->node == NULL) + return; + set_bits = clear_bits = 0; + + if (break_state) + set_bits |= SND_BRK; + else + clear_bits |= SND_BRK; + + spin_lock_irqsave(&port->lock, flags); + + new_reg = (uap->curregs[R5] | set_bits) & ~clear_bits; + if (new_reg != uap->curregs[R5]) { + uap->curregs[R5] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + if (ZS_IS_ASLEEP(uap)) { + spin_unlock_irqrestore(&port->lock, flags); + return; + } + write_zsreg(uap, R5, uap->curregs[R5]); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +#ifdef CONFIG_PPC_PMAC + +/* + * Turn power on or off to the SCC and associated stuff + * (port drivers, modem, IR port, etc.) + * Returns the number of milliseconds we should wait before + * trying to use the port. + */ +static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) +{ + int delay = 0; + int rc; + + if (state) { + rc = pmac_call_feature( + PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 1); + pmz_debug("port power on result: %d\n", rc); + if (ZS_IS_INTMODEM(uap)) { + rc = pmac_call_feature( + PMAC_FTR_MODEM_ENABLE, uap->node, 0, 1); + delay = 2500; /* wait for 2.5s before using */ + pmz_debug("modem power result: %d\n", rc); + } + } else { + /* TODO: Make that depend on a timer, don't power down + * immediately + */ + if (ZS_IS_INTMODEM(uap)) { + rc = pmac_call_feature( + PMAC_FTR_MODEM_ENABLE, uap->node, 0, 0); + pmz_debug("port power off result: %d\n", rc); + } + pmac_call_feature(PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 0); + } + return delay; +} + +#else + +static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) +{ + return 0; +} + +#endif /* !CONFIG_PPC_PMAC */ + +/* + * FixZeroBug....Works around a bug in the SCC receving channel. + * Inspired from Darwin code, 15 Sept. 2000 -DanM + * + * The following sequence prevents a problem that is seen with O'Hare ASICs + * (most versions -- also with some Heathrow and Hydra ASICs) where a zero + * at the input to the receiver becomes 'stuck' and locks up the receiver. + * This problem can occur as a result of a zero bit at the receiver input + * coincident with any of the following events: + * + * The SCC is initialized (hardware or software). + * A framing error is detected. + * The clocking option changes from synchronous or X1 asynchronous + * clocking to X16, X32, or X64 asynchronous clocking. + * The decoding mode is changed among NRZ, NRZI, FM0, or FM1. + * + * This workaround attempts to recover from the lockup condition by placing + * the SCC in synchronous loopback mode with a fast clock before programming + * any of the asynchronous modes. + */ +static void pmz_fix_zero_bug_scc(struct uart_pmac_port *uap) +{ + write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB); + zssync(uap); + udelay(10); + write_zsreg(uap, 9, (ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB) | NV); + zssync(uap); + + write_zsreg(uap, 4, X1CLK | MONSYNC); + write_zsreg(uap, 3, Rx8); + write_zsreg(uap, 5, Tx8 | RTS); + write_zsreg(uap, 9, NV); /* Didn't we already do this? */ + write_zsreg(uap, 11, RCBR | TCBR); + write_zsreg(uap, 12, 0); + write_zsreg(uap, 13, 0); + write_zsreg(uap, 14, (LOOPBAK | BRSRC)); + write_zsreg(uap, 14, (LOOPBAK | BRSRC | BRENAB)); + write_zsreg(uap, 3, Rx8 | RxENABLE); + write_zsreg(uap, 0, RES_EXT_INT); + write_zsreg(uap, 0, RES_EXT_INT); + write_zsreg(uap, 0, RES_EXT_INT); /* to kill some time */ + + /* The channel should be OK now, but it is probably receiving + * loopback garbage. + * Switch to asynchronous mode, disable the receiver, + * and discard everything in the receive buffer. + */ + write_zsreg(uap, 9, NV); + write_zsreg(uap, 4, X16CLK | SB_MASK); + write_zsreg(uap, 3, Rx8); + + while (read_zsreg(uap, 0) & Rx_CH_AV) { + (void)read_zsreg(uap, 8); + write_zsreg(uap, 0, RES_EXT_INT); + write_zsreg(uap, 0, ERR_RES); + } +} + +/* + * Real startup routine, powers up the hardware and sets up + * the SCC. Returns a delay in ms where you need to wait before + * actually using the port, this is typically the internal modem + * powerup delay. This routine expect the lock to be taken. + */ +static int __pmz_startup(struct uart_pmac_port *uap) +{ + int pwr_delay = 0; + + memset(&uap->curregs, 0, sizeof(uap->curregs)); + + /* Power up the SCC & underlying hardware (modem/irda) */ + pwr_delay = pmz_set_scc_power(uap, 1); + + /* Nice buggy HW ... */ + pmz_fix_zero_bug_scc(uap); + + /* Reset the channel */ + uap->curregs[R9] = 0; + write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB); + zssync(uap); + udelay(10); + write_zsreg(uap, 9, 0); + zssync(uap); + + /* Clear the interrupt registers */ + write_zsreg(uap, R1, 0); + write_zsreg(uap, R0, ERR_RES); + write_zsreg(uap, R0, ERR_RES); + write_zsreg(uap, R0, RES_H_IUS); + write_zsreg(uap, R0, RES_H_IUS); + + /* Setup some valid baud rate */ + uap->curregs[R4] = X16CLK | SB1; + uap->curregs[R3] = Rx8; + uap->curregs[R5] = Tx8 | RTS; + if (!ZS_IS_IRDA(uap)) + uap->curregs[R5] |= DTR; + uap->curregs[R12] = 0; + uap->curregs[R13] = 0; + uap->curregs[R14] = BRENAB; + + /* Clear handshaking, enable BREAK interrupts */ + uap->curregs[R15] = BRKIE; + + /* Master interrupt enable */ + uap->curregs[R9] |= NV | MIE; + + pmz_load_zsregs(uap, uap->curregs); + + /* Enable receiver and transmitter. */ + write_zsreg(uap, R3, uap->curregs[R3] |= RxENABLE); + write_zsreg(uap, R5, uap->curregs[R5] |= TxENABLE); + + /* Remember status for DCD/CTS changes */ + uap->prev_status = read_zsreg(uap, R0); + + return pwr_delay; +} + +static void pmz_irda_reset(struct uart_pmac_port *uap) +{ + uap->curregs[R5] |= DTR; + write_zsreg(uap, R5, uap->curregs[R5]); + zssync(uap); + mdelay(110); + uap->curregs[R5] &= ~DTR; + write_zsreg(uap, R5, uap->curregs[R5]); + zssync(uap); + mdelay(10); +} + +/* + * This is the "normal" startup routine, using the above one + * wrapped with the lock and doing a schedule delay + */ +static int pmz_startup(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned long flags; + int pwr_delay = 0; + + pmz_debug("pmz: startup()\n"); + + if (ZS_IS_ASLEEP(uap)) + return -EAGAIN; + if (uap->node == NULL) + return -ENODEV; + + mutex_lock(&pmz_irq_mutex); + + uap->flags |= PMACZILOG_FLAG_IS_OPEN; + + /* A console is never powered down. Else, power up and + * initialize the chip + */ + if (!ZS_IS_CONS(uap)) { + spin_lock_irqsave(&port->lock, flags); + pwr_delay = __pmz_startup(uap); + spin_unlock_irqrestore(&port->lock, flags); + } + + pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON; + if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, + "SCC", uap)) { + pmz_error("Unable to register zs interrupt handler.\n"); + pmz_set_scc_power(uap, 0); + mutex_unlock(&pmz_irq_mutex); + return -ENXIO; + } + + mutex_unlock(&pmz_irq_mutex); + + /* Right now, we deal with delay by blocking here, I'll be + * smarter later on + */ + if (pwr_delay != 0) { + pmz_debug("pmz: delaying %d ms\n", pwr_delay); + msleep(pwr_delay); + } + + /* IrDA reset is done now */ + if (ZS_IS_IRDA(uap)) + pmz_irda_reset(uap); + + /* Enable interrupts emission from the chip */ + spin_lock_irqsave(&port->lock, flags); + uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB; + if (!ZS_IS_EXTCLK(uap)) + uap->curregs[R1] |= EXT_INT_ENAB; + write_zsreg(uap, R1, uap->curregs[R1]); + spin_unlock_irqrestore(&port->lock, flags); + + pmz_debug("pmz: startup() done.\n"); + + return 0; +} + +static void pmz_shutdown(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned long flags; + + pmz_debug("pmz: shutdown()\n"); + + if (uap->node == NULL) + return; + + mutex_lock(&pmz_irq_mutex); + + /* Release interrupt handler */ + free_irq(uap->port.irq, uap); + + spin_lock_irqsave(&port->lock, flags); + + uap->flags &= ~PMACZILOG_FLAG_IS_OPEN; + + if (!ZS_IS_OPEN(uap->mate)) + pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON; + + /* Disable interrupts */ + if (!ZS_IS_ASLEEP(uap)) { + uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + write_zsreg(uap, R1, uap->curregs[R1]); + zssync(uap); + } + + if (ZS_IS_CONS(uap) || ZS_IS_ASLEEP(uap)) { + spin_unlock_irqrestore(&port->lock, flags); + mutex_unlock(&pmz_irq_mutex); + return; + } + + /* Disable receiver and transmitter. */ + uap->curregs[R3] &= ~RxENABLE; + uap->curregs[R5] &= ~TxENABLE; + + /* Disable all interrupts and BRK assertion. */ + uap->curregs[R5] &= ~SND_BRK; + pmz_maybe_update_regs(uap); + + /* Shut the chip down */ + pmz_set_scc_power(uap, 0); + + spin_unlock_irqrestore(&port->lock, flags); + + mutex_unlock(&pmz_irq_mutex); + + pmz_debug("pmz: shutdown() done.\n"); +} + +/* Shared by TTY driver and serial console setup. The port lock is held + * and local interrupts are disabled. + */ +static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag, + unsigned int iflag, unsigned long baud) +{ + int brg; + + /* Switch to external clocking for IrDA high clock rates. That + * code could be re-used for Midi interfaces with different + * multipliers + */ + if (baud >= 115200 && ZS_IS_IRDA(uap)) { + uap->curregs[R4] = X1CLK; + uap->curregs[R11] = RCTRxCP | TCTRxCP; + uap->curregs[R14] = 0; /* BRG off */ + uap->curregs[R12] = 0; + uap->curregs[R13] = 0; + uap->flags |= PMACZILOG_FLAG_IS_EXTCLK; + } else { + switch (baud) { + case ZS_CLOCK/16: /* 230400 */ + uap->curregs[R4] = X16CLK; + uap->curregs[R11] = 0; + uap->curregs[R14] = 0; + break; + case ZS_CLOCK/32: /* 115200 */ + uap->curregs[R4] = X32CLK; + uap->curregs[R11] = 0; + uap->curregs[R14] = 0; + break; + default: + uap->curregs[R4] = X16CLK; + uap->curregs[R11] = TCBR | RCBR; + brg = BPS_TO_BRG(baud, ZS_CLOCK / 16); + uap->curregs[R12] = (brg & 255); + uap->curregs[R13] = ((brg >> 8) & 255); + uap->curregs[R14] = BRENAB; + } + uap->flags &= ~PMACZILOG_FLAG_IS_EXTCLK; + } + + /* Character size, stop bits, and parity. */ + uap->curregs[3] &= ~RxN_MASK; + uap->curregs[5] &= ~TxN_MASK; + + switch (cflag & CSIZE) { + case CS5: + uap->curregs[3] |= Rx5; + uap->curregs[5] |= Tx5; + uap->parity_mask = 0x1f; + break; + case CS6: + uap->curregs[3] |= Rx6; + uap->curregs[5] |= Tx6; + uap->parity_mask = 0x3f; + break; + case CS7: + uap->curregs[3] |= Rx7; + uap->curregs[5] |= Tx7; + uap->parity_mask = 0x7f; + break; + case CS8: + default: + uap->curregs[3] |= Rx8; + uap->curregs[5] |= Tx8; + uap->parity_mask = 0xff; + break; + }; + uap->curregs[4] &= ~(SB_MASK); + if (cflag & CSTOPB) + uap->curregs[4] |= SB2; + else + uap->curregs[4] |= SB1; + if (cflag & PARENB) + uap->curregs[4] |= PAR_ENAB; + else + uap->curregs[4] &= ~PAR_ENAB; + if (!(cflag & PARODD)) + uap->curregs[4] |= PAR_EVEN; + else + uap->curregs[4] &= ~PAR_EVEN; + + uap->port.read_status_mask = Rx_OVR; + if (iflag & INPCK) + uap->port.read_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & (BRKINT | PARMRK)) + uap->port.read_status_mask |= BRK_ABRT; + + uap->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + uap->port.ignore_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & IGNBRK) { + uap->port.ignore_status_mask |= BRK_ABRT; + if (iflag & IGNPAR) + uap->port.ignore_status_mask |= Rx_OVR; + } + + if ((cflag & CREAD) == 0) + uap->port.ignore_status_mask = 0xff; +} + + +/* + * Set the irda codec on the imac to the specified baud rate. + */ +static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) +{ + u8 cmdbyte; + int t, version; + + switch (*baud) { + /* SIR modes */ + case 2400: + cmdbyte = 0x53; + break; + case 4800: + cmdbyte = 0x52; + break; + case 9600: + cmdbyte = 0x51; + break; + case 19200: + cmdbyte = 0x50; + break; + case 38400: + cmdbyte = 0x4f; + break; + case 57600: + cmdbyte = 0x4e; + break; + case 115200: + cmdbyte = 0x4d; + break; + /* The FIR modes aren't really supported at this point, how + * do we select the speed ? via the FCR on KeyLargo ? + */ + case 1152000: + cmdbyte = 0; + break; + case 4000000: + cmdbyte = 0; + break; + default: /* 9600 */ + cmdbyte = 0x51; + *baud = 9600; + break; + } + + /* Wait for transmitter to drain */ + t = 10000; + while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0 + || (read_zsreg(uap, R1) & ALL_SNT) == 0) { + if (--t <= 0) { + pmz_error("transmitter didn't drain\n"); + return; + } + udelay(10); + } + + /* Drain the receiver too */ + t = 100; + (void)read_zsdata(uap); + (void)read_zsdata(uap); + (void)read_zsdata(uap); + mdelay(10); + while (read_zsreg(uap, R0) & Rx_CH_AV) { + read_zsdata(uap); + mdelay(10); + if (--t <= 0) { + pmz_error("receiver didn't drain\n"); + return; + } + } + + /* Switch to command mode */ + uap->curregs[R5] |= DTR; + write_zsreg(uap, R5, uap->curregs[R5]); + zssync(uap); + mdelay(1); + + /* Switch SCC to 19200 */ + pmz_convert_to_zs(uap, CS8, 0, 19200); + pmz_load_zsregs(uap, uap->curregs); + mdelay(1); + + /* Write get_version command byte */ + write_zsdata(uap, 1); + t = 5000; + while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { + if (--t <= 0) { + pmz_error("irda_setup timed out on get_version byte\n"); + goto out; + } + udelay(10); + } + version = read_zsdata(uap); + + if (version < 4) { + pmz_info("IrDA: dongle version %d not supported\n", version); + goto out; + } + + /* Send speed mode */ + write_zsdata(uap, cmdbyte); + t = 5000; + while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { + if (--t <= 0) { + pmz_error("irda_setup timed out on speed mode byte\n"); + goto out; + } + udelay(10); + } + t = read_zsdata(uap); + if (t != cmdbyte) + pmz_error("irda_setup speed mode byte = %x (%x)\n", t, cmdbyte); + + pmz_info("IrDA setup for %ld bps, dongle version: %d\n", + *baud, version); + + (void)read_zsdata(uap); + (void)read_zsdata(uap); + (void)read_zsdata(uap); + + out: + /* Switch back to data mode */ + uap->curregs[R5] &= ~DTR; + write_zsreg(uap, R5, uap->curregs[R5]); + zssync(uap); + + (void)read_zsdata(uap); + (void)read_zsdata(uap); + (void)read_zsdata(uap); +} + + +static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned long baud; + + pmz_debug("pmz: set_termios()\n"); + + if (ZS_IS_ASLEEP(uap)) + return; + + memcpy(&uap->termios_cache, termios, sizeof(struct ktermios)); + + /* XXX Check which revs of machines actually allow 1 and 4Mb speeds + * on the IR dongle. Note that the IRTTY driver currently doesn't know + * about the FIR mode and high speed modes. So these are unused. For + * implementing proper support for these, we should probably add some + * DMA as well, at least on the Rx side, which isn't a simple thing + * at this point. + */ + if (ZS_IS_IRDA(uap)) { + /* Calc baud rate */ + baud = uart_get_baud_rate(port, termios, old, 1200, 4000000); + pmz_debug("pmz: switch IRDA to %ld bauds\n", baud); + /* Cet the irda codec to the right rate */ + pmz_irda_setup(uap, &baud); + /* Set final baud rate */ + pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud); + pmz_load_zsregs(uap, uap->curregs); + zssync(uap); + } else { + baud = uart_get_baud_rate(port, termios, old, 1200, 230400); + pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud); + /* Make sure modem status interrupts are correctly configured */ + if (UART_ENABLE_MS(&uap->port, termios->c_cflag)) { + uap->curregs[R15] |= DCDIE | SYNCIE | CTSIE; + uap->flags |= PMACZILOG_FLAG_MODEM_STATUS; + } else { + uap->curregs[R15] &= ~(DCDIE | SYNCIE | CTSIE); + uap->flags &= ~PMACZILOG_FLAG_MODEM_STATUS; + } + + /* Load registers to the chip */ + pmz_maybe_update_regs(uap); + } + uart_update_timeout(port, termios->c_cflag, baud); + + pmz_debug("pmz: set_termios() done.\n"); +} + +/* The port lock is not held. */ +static void pmz_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable IRQs on the port */ + uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + write_zsreg(uap, R1, uap->curregs[R1]); + + /* Setup new port configuration */ + __pmz_set_termios(port, termios, old); + + /* Re-enable IRQs on the port */ + if (ZS_IS_OPEN(uap)) { + uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB; + if (!ZS_IS_EXTCLK(uap)) + uap->curregs[R1] |= EXT_INT_ENAB; + write_zsreg(uap, R1, uap->curregs[R1]); + } + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *pmz_type(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + + if (ZS_IS_IRDA(uap)) + return "Z85c30 ESCC - Infrared port"; + else if (ZS_IS_INTMODEM(uap)) + return "Z85c30 ESCC - Internal modem"; + return "Z85c30 ESCC - Serial port"; +} + +/* We do not request/release mappings of the registers here, this + * happens at early serial probe time. + */ +static void pmz_release_port(struct uart_port *port) +{ +} + +static int pmz_request_port(struct uart_port *port) +{ + return 0; +} + +/* These do not need to do anything interesting either. */ +static void pmz_config_port(struct uart_port *port, int flags) +{ +} + +/* We do not support letting the user mess with the divisor, IRQ, etc. */ +static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +#ifdef CONFIG_CONSOLE_POLL + +static int pmz_poll_get_char(struct uart_port *port) +{ + struct uart_pmac_port *uap = (struct uart_pmac_port *)port; + + while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) + udelay(5); + return read_zsdata(uap); +} + +static void pmz_poll_put_char(struct uart_port *port, unsigned char c) +{ + struct uart_pmac_port *uap = (struct uart_pmac_port *)port; + + /* Wait for the transmit buffer to empty. */ + while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) + udelay(5); + write_zsdata(uap, c); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static struct uart_ops pmz_pops = { + .tx_empty = pmz_tx_empty, + .set_mctrl = pmz_set_mctrl, + .get_mctrl = pmz_get_mctrl, + .stop_tx = pmz_stop_tx, + .start_tx = pmz_start_tx, + .stop_rx = pmz_stop_rx, + .enable_ms = pmz_enable_ms, + .break_ctl = pmz_break_ctl, + .startup = pmz_startup, + .shutdown = pmz_shutdown, + .set_termios = pmz_set_termios, + .type = pmz_type, + .release_port = pmz_release_port, + .request_port = pmz_request_port, + .config_port = pmz_config_port, + .verify_port = pmz_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = pmz_poll_get_char, + .poll_put_char = pmz_poll_put_char, +#endif +}; + +#ifdef CONFIG_PPC_PMAC + +/* + * Setup one port structure after probing, HW is down at this point, + * Unlike sunzilog, we don't need to pre-init the spinlock as we don't + * register our console before uart_add_one_port() is called + */ +static int __init pmz_init_port(struct uart_pmac_port *uap) +{ + struct device_node *np = uap->node; + const char *conn; + const struct slot_names_prop { + int count; + char name[1]; + } *slots; + int len; + struct resource r_ports, r_rxdma, r_txdma; + + /* + * Request & map chip registers + */ + if (of_address_to_resource(np, 0, &r_ports)) + return -ENODEV; + uap->port.mapbase = r_ports.start; + uap->port.membase = ioremap(uap->port.mapbase, 0x1000); + + uap->control_reg = uap->port.membase; + uap->data_reg = uap->control_reg + 0x10; + + /* + * Request & map DBDMA registers + */ +#ifdef HAS_DBDMA + if (of_address_to_resource(np, 1, &r_txdma) == 0 && + of_address_to_resource(np, 2, &r_rxdma) == 0) + uap->flags |= PMACZILOG_FLAG_HAS_DMA; +#else + memset(&r_txdma, 0, sizeof(struct resource)); + memset(&r_rxdma, 0, sizeof(struct resource)); +#endif + if (ZS_HAS_DMA(uap)) { + uap->tx_dma_regs = ioremap(r_txdma.start, 0x100); + if (uap->tx_dma_regs == NULL) { + uap->flags &= ~PMACZILOG_FLAG_HAS_DMA; + goto no_dma; + } + uap->rx_dma_regs = ioremap(r_rxdma.start, 0x100); + if (uap->rx_dma_regs == NULL) { + iounmap(uap->tx_dma_regs); + uap->tx_dma_regs = NULL; + uap->flags &= ~PMACZILOG_FLAG_HAS_DMA; + goto no_dma; + } + uap->tx_dma_irq = irq_of_parse_and_map(np, 1); + uap->rx_dma_irq = irq_of_parse_and_map(np, 2); + } +no_dma: + + /* + * Detect port type + */ + if (of_device_is_compatible(np, "cobalt")) + uap->flags |= PMACZILOG_FLAG_IS_INTMODEM; + conn = of_get_property(np, "AAPL,connector", &len); + if (conn && (strcmp(conn, "infrared") == 0)) + uap->flags |= PMACZILOG_FLAG_IS_IRDA; + uap->port_type = PMAC_SCC_ASYNC; + /* 1999 Powerbook G3 has slot-names property instead */ + slots = of_get_property(np, "slot-names", &len); + if (slots && slots->count > 0) { + if (strcmp(slots->name, "IrDA") == 0) + uap->flags |= PMACZILOG_FLAG_IS_IRDA; + else if (strcmp(slots->name, "Modem") == 0) + uap->flags |= PMACZILOG_FLAG_IS_INTMODEM; + } + if (ZS_IS_IRDA(uap)) + uap->port_type = PMAC_SCC_IRDA; + if (ZS_IS_INTMODEM(uap)) { + struct device_node* i2c_modem = + of_find_node_by_name(NULL, "i2c-modem"); + if (i2c_modem) { + const char* mid = + of_get_property(i2c_modem, "modem-id", NULL); + if (mid) switch(*mid) { + case 0x04 : + case 0x05 : + case 0x07 : + case 0x08 : + case 0x0b : + case 0x0c : + uap->port_type = PMAC_SCC_I2S1; + } + printk(KERN_INFO "pmac_zilog: i2c-modem detected, id: %d\n", + mid ? (*mid) : 0); + of_node_put(i2c_modem); + } else { + printk(KERN_INFO "pmac_zilog: serial modem detected\n"); + } + } + + /* + * Init remaining bits of "port" structure + */ + uap->port.iotype = UPIO_MEM; + uap->port.irq = irq_of_parse_and_map(np, 0); + uap->port.uartclk = ZS_CLOCK; + uap->port.fifosize = 1; + uap->port.ops = &pmz_pops; + uap->port.type = PORT_PMAC_ZILOG; + uap->port.flags = 0; + + /* + * Fixup for the port on Gatwick for which the device-tree has + * missing interrupts. Normally, the macio_dev would contain + * fixed up interrupt info, but we use the device-tree directly + * here due to early probing so we need the fixup too. + */ + if (uap->port.irq == NO_IRQ && + np->parent && np->parent->parent && + of_device_is_compatible(np->parent->parent, "gatwick")) { + /* IRQs on gatwick are offset by 64 */ + uap->port.irq = irq_create_mapping(NULL, 64 + 15); + uap->tx_dma_irq = irq_create_mapping(NULL, 64 + 4); + uap->rx_dma_irq = irq_create_mapping(NULL, 64 + 5); + } + + /* Setup some valid baud rate information in the register + * shadows so we don't write crap there before baud rate is + * first initialized. + */ + pmz_convert_to_zs(uap, CS8, 0, 9600); + + return 0; +} + +/* + * Get rid of a port on module removal + */ +static void pmz_dispose_port(struct uart_pmac_port *uap) +{ + struct device_node *np; + + np = uap->node; + iounmap(uap->rx_dma_regs); + iounmap(uap->tx_dma_regs); + iounmap(uap->control_reg); + uap->node = NULL; + of_node_put(np); + memset(uap, 0, sizeof(struct uart_pmac_port)); +} + +/* + * Called upon match with an escc node in the device-tree. + */ +static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match) +{ + int i; + + /* Iterate the pmz_ports array to find a matching entry + */ + for (i = 0; i < MAX_ZS_PORTS; i++) + if (pmz_ports[i].node == mdev->ofdev.dev.of_node) { + struct uart_pmac_port *uap = &pmz_ports[i]; + + uap->dev = mdev; + dev_set_drvdata(&mdev->ofdev.dev, uap); + if (macio_request_resources(uap->dev, "pmac_zilog")) + printk(KERN_WARNING "%s: Failed to request resource" + ", port still active\n", + uap->node->name); + else + uap->flags |= PMACZILOG_FLAG_RSRC_REQUESTED; + return 0; + } + return -ENODEV; +} + +/* + * That one should not be called, macio isn't really a hotswap device, + * we don't expect one of those serial ports to go away... + */ +static int pmz_detach(struct macio_dev *mdev) +{ + struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); + + if (!uap) + return -ENODEV; + + if (uap->flags & PMACZILOG_FLAG_RSRC_REQUESTED) { + macio_release_resources(uap->dev); + uap->flags &= ~PMACZILOG_FLAG_RSRC_REQUESTED; + } + dev_set_drvdata(&mdev->ofdev.dev, NULL); + uap->dev = NULL; + + return 0; +} + + +static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state) +{ + struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); + struct uart_state *state; + unsigned long flags; + + if (uap == NULL) { + printk("HRM... pmz_suspend with NULL uap\n"); + return 0; + } + + if (pm_state.event == mdev->ofdev.dev.power.power_state.event) + return 0; + + pmz_debug("suspend, switching to state %d\n", pm_state.event); + + state = pmz_uart_reg.state + uap->port.line; + + mutex_lock(&pmz_irq_mutex); + mutex_lock(&state->port.mutex); + + spin_lock_irqsave(&uap->port.lock, flags); + + if (ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)) { + /* Disable receiver and transmitter. */ + uap->curregs[R3] &= ~RxENABLE; + uap->curregs[R5] &= ~TxENABLE; + + /* Disable all interrupts and BRK assertion. */ + uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + uap->curregs[R5] &= ~SND_BRK; + pmz_load_zsregs(uap, uap->curregs); + uap->flags |= PMACZILOG_FLAG_IS_ASLEEP; + mb(); + } + + spin_unlock_irqrestore(&uap->port.lock, flags); + + if (ZS_IS_OPEN(uap) || ZS_IS_OPEN(uap->mate)) + if (ZS_IS_ASLEEP(uap->mate) && ZS_IS_IRQ_ON(pmz_get_port_A(uap))) { + pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON; + disable_irq(uap->port.irq); + } + + if (ZS_IS_CONS(uap)) + uap->port.cons->flags &= ~CON_ENABLED; + + /* Shut the chip down */ + pmz_set_scc_power(uap, 0); + + mutex_unlock(&state->port.mutex); + mutex_unlock(&pmz_irq_mutex); + + pmz_debug("suspend, switching complete\n"); + + mdev->ofdev.dev.power.power_state = pm_state; + + return 0; +} + + +static int pmz_resume(struct macio_dev *mdev) +{ + struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); + struct uart_state *state; + unsigned long flags; + int pwr_delay = 0; + + if (uap == NULL) + return 0; + + if (mdev->ofdev.dev.power.power_state.event == PM_EVENT_ON) + return 0; + + pmz_debug("resume, switching to state 0\n"); + + state = pmz_uart_reg.state + uap->port.line; + + mutex_lock(&pmz_irq_mutex); + mutex_lock(&state->port.mutex); + + spin_lock_irqsave(&uap->port.lock, flags); + if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) { + spin_unlock_irqrestore(&uap->port.lock, flags); + goto bail; + } + pwr_delay = __pmz_startup(uap); + + /* Take care of config that may have changed while asleep */ + __pmz_set_termios(&uap->port, &uap->termios_cache, NULL); + + if (ZS_IS_OPEN(uap)) { + /* Enable interrupts */ + uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB; + if (!ZS_IS_EXTCLK(uap)) + uap->curregs[R1] |= EXT_INT_ENAB; + write_zsreg(uap, R1, uap->curregs[R1]); + } + + spin_unlock_irqrestore(&uap->port.lock, flags); + + if (ZS_IS_CONS(uap)) + uap->port.cons->flags |= CON_ENABLED; + + /* Re-enable IRQ on the controller */ + if (ZS_IS_OPEN(uap) && !ZS_IS_IRQ_ON(pmz_get_port_A(uap))) { + pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON; + enable_irq(uap->port.irq); + } + + bail: + mutex_unlock(&state->port.mutex); + mutex_unlock(&pmz_irq_mutex); + + /* Right now, we deal with delay by blocking here, I'll be + * smarter later on + */ + if (pwr_delay != 0) { + pmz_debug("pmz: delaying %d ms\n", pwr_delay); + msleep(pwr_delay); + } + + pmz_debug("resume, switching complete\n"); + + mdev->ofdev.dev.power.power_state.event = PM_EVENT_ON; + + return 0; +} + +/* + * Probe all ports in the system and build the ports array, we register + * with the serial layer at this point, the macio-type probing is only + * used later to "attach" to the sysfs tree so we get power management + * events + */ +static int __init pmz_probe(void) +{ + struct device_node *node_p, *node_a, *node_b, *np; + int count = 0; + int rc; + + /* + * Find all escc chips in the system + */ + node_p = of_find_node_by_name(NULL, "escc"); + while (node_p) { + /* + * First get channel A/B node pointers + * + * TODO: Add routines with proper locking to do that... + */ + node_a = node_b = NULL; + for (np = NULL; (np = of_get_next_child(node_p, np)) != NULL;) { + if (strncmp(np->name, "ch-a", 4) == 0) + node_a = of_node_get(np); + else if (strncmp(np->name, "ch-b", 4) == 0) + node_b = of_node_get(np); + } + if (!node_a && !node_b) { + of_node_put(node_a); + of_node_put(node_b); + printk(KERN_ERR "pmac_zilog: missing node %c for escc %s\n", + (!node_a) ? 'a' : 'b', node_p->full_name); + goto next; + } + + /* + * Fill basic fields in the port structures + */ + pmz_ports[count].mate = &pmz_ports[count+1]; + pmz_ports[count+1].mate = &pmz_ports[count]; + pmz_ports[count].flags = PMACZILOG_FLAG_IS_CHANNEL_A; + pmz_ports[count].node = node_a; + pmz_ports[count+1].node = node_b; + pmz_ports[count].port.line = count; + pmz_ports[count+1].port.line = count+1; + + /* + * Setup the ports for real + */ + rc = pmz_init_port(&pmz_ports[count]); + if (rc == 0 && node_b != NULL) + rc = pmz_init_port(&pmz_ports[count+1]); + if (rc != 0) { + of_node_put(node_a); + of_node_put(node_b); + memset(&pmz_ports[count], 0, sizeof(struct uart_pmac_port)); + memset(&pmz_ports[count+1], 0, sizeof(struct uart_pmac_port)); + goto next; + } + count += 2; +next: + node_p = of_find_node_by_name(node_p, "escc"); + } + pmz_ports_count = count; + + return 0; +} + +#else + +extern struct platform_device scc_a_pdev, scc_b_pdev; + +static int __init pmz_init_port(struct uart_pmac_port *uap) +{ + struct resource *r_ports; + int irq; + + r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0); + irq = platform_get_irq(uap->node, 0); + if (!r_ports || !irq) + return -ENODEV; + + uap->port.mapbase = r_ports->start; + uap->port.membase = (unsigned char __iomem *) r_ports->start; + uap->port.iotype = UPIO_MEM; + uap->port.irq = irq; + uap->port.uartclk = ZS_CLOCK; + uap->port.fifosize = 1; + uap->port.ops = &pmz_pops; + uap->port.type = PORT_PMAC_ZILOG; + uap->port.flags = 0; + + uap->control_reg = uap->port.membase; + uap->data_reg = uap->control_reg + 4; + uap->port_type = 0; + + pmz_convert_to_zs(uap, CS8, 0, 9600); + + return 0; +} + +static int __init pmz_probe(void) +{ + int err; + + pmz_ports_count = 0; + + pmz_ports[0].mate = &pmz_ports[1]; + pmz_ports[0].port.line = 0; + pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A; + pmz_ports[0].node = &scc_a_pdev; + err = pmz_init_port(&pmz_ports[0]); + if (err) + return err; + pmz_ports_count++; + + pmz_ports[1].mate = &pmz_ports[0]; + pmz_ports[1].port.line = 1; + pmz_ports[1].flags = 0; + pmz_ports[1].node = &scc_b_pdev; + err = pmz_init_port(&pmz_ports[1]); + if (err) + return err; + pmz_ports_count++; + + return 0; +} + +static void pmz_dispose_port(struct uart_pmac_port *uap) +{ + memset(uap, 0, sizeof(struct uart_pmac_port)); +} + +static int __init pmz_attach(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < pmz_ports_count; i++) + if (pmz_ports[i].node == pdev) + return 0; + return -ENODEV; +} + +static int __exit pmz_detach(struct platform_device *pdev) +{ + return 0; +} + +#endif /* !CONFIG_PPC_PMAC */ + +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE + +static void pmz_console_write(struct console *con, const char *s, unsigned int count); +static int __init pmz_console_setup(struct console *co, char *options); + +static struct console pmz_console = { + .name = PMACZILOG_NAME, + .write = pmz_console_write, + .device = uart_console_device, + .setup = pmz_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &pmz_uart_reg, +}; + +#define PMACZILOG_CONSOLE &pmz_console +#else /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ +#define PMACZILOG_CONSOLE (NULL) +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + +/* + * Register the driver, console driver and ports with the serial + * core + */ +static int __init pmz_register(void) +{ + int i, rc; + + pmz_uart_reg.nr = pmz_ports_count; + pmz_uart_reg.cons = PMACZILOG_CONSOLE; + + /* + * Register this driver with the serial core + */ + rc = uart_register_driver(&pmz_uart_reg); + if (rc) + return rc; + + /* + * Register each port with the serial core + */ + for (i = 0; i < pmz_ports_count; i++) { + struct uart_pmac_port *uport = &pmz_ports[i]; + /* NULL node may happen on wallstreet */ + if (uport->node != NULL) + rc = uart_add_one_port(&pmz_uart_reg, &uport->port); + if (rc) + goto err_out; + } + + return 0; +err_out: + while (i-- > 0) { + struct uart_pmac_port *uport = &pmz_ports[i]; + uart_remove_one_port(&pmz_uart_reg, &uport->port); + } + uart_unregister_driver(&pmz_uart_reg); + return rc; +} + +#ifdef CONFIG_PPC_PMAC + +static struct of_device_id pmz_match[] = +{ + { + .name = "ch-a", + }, + { + .name = "ch-b", + }, + {}, +}; +MODULE_DEVICE_TABLE (of, pmz_match); + +static struct macio_driver pmz_driver = { + .driver = { + .name = "pmac_zilog", + .owner = THIS_MODULE, + .of_match_table = pmz_match, + }, + .probe = pmz_attach, + .remove = pmz_detach, + .suspend = pmz_suspend, + .resume = pmz_resume, +}; + +#else + +static struct platform_driver pmz_driver = { + .remove = __exit_p(pmz_detach), + .driver = { + .name = "scc", + .owner = THIS_MODULE, + }, +}; + +#endif /* !CONFIG_PPC_PMAC */ + +static int __init init_pmz(void) +{ + int rc, i; + printk(KERN_INFO "%s\n", version); + + /* + * First, we need to do a direct OF-based probe pass. We + * do that because we want serial console up before the + * macio stuffs calls us back, and since that makes it + * easier to pass the proper number of channels to + * uart_register_driver() + */ + if (pmz_ports_count == 0) + pmz_probe(); + + /* + * Bail early if no port found + */ + if (pmz_ports_count == 0) + return -ENODEV; + + /* + * Now we register with the serial layer + */ + rc = pmz_register(); + if (rc) { + printk(KERN_ERR + "pmac_zilog: Error registering serial device, disabling pmac_zilog.\n" + "pmac_zilog: Did another serial driver already claim the minors?\n"); + /* effectively "pmz_unprobe()" */ + for (i=0; i < pmz_ports_count; i++) + pmz_dispose_port(&pmz_ports[i]); + return rc; + } + + /* + * Then we register the macio driver itself + */ +#ifdef CONFIG_PPC_PMAC + return macio_register_driver(&pmz_driver); +#else + return platform_driver_probe(&pmz_driver, pmz_attach); +#endif +} + +static void __exit exit_pmz(void) +{ + int i; + +#ifdef CONFIG_PPC_PMAC + /* Get rid of macio-driver (detach from macio) */ + macio_unregister_driver(&pmz_driver); +#else + platform_driver_unregister(&pmz_driver); +#endif + + for (i = 0; i < pmz_ports_count; i++) { + struct uart_pmac_port *uport = &pmz_ports[i]; + if (uport->node != NULL) { + uart_remove_one_port(&pmz_uart_reg, &uport->port); + pmz_dispose_port(uport); + } + } + /* Unregister UART driver */ + uart_unregister_driver(&pmz_uart_reg); +} + +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE + +static void pmz_console_putchar(struct uart_port *port, int ch) +{ + struct uart_pmac_port *uap = (struct uart_pmac_port *)port; + + /* Wait for the transmit buffer to empty. */ + while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) + udelay(5); + write_zsdata(uap, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ +static void pmz_console_write(struct console *con, const char *s, unsigned int count) +{ + struct uart_pmac_port *uap = &pmz_ports[con->index]; + unsigned long flags; + + if (ZS_IS_ASLEEP(uap)) + return; + spin_lock_irqsave(&uap->port.lock, flags); + + /* Turn of interrupts and enable the transmitter. */ + write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB); + write_zsreg(uap, R5, uap->curregs[5] | TxENABLE | RTS | DTR); + + uart_console_write(&uap->port, s, count, pmz_console_putchar); + + /* Restore the values in the registers. */ + write_zsreg(uap, R1, uap->curregs[1]); + /* Don't disable the transmitter. */ + + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +/* + * Setup the serial console + */ +static int __init pmz_console_setup(struct console *co, char *options) +{ + struct uart_pmac_port *uap; + struct uart_port *port; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + unsigned long pwr_delay; + + /* + * XServe's default to 57600 bps + */ + if (of_machine_is_compatible("RackMac1,1") + || of_machine_is_compatible("RackMac1,2") + || of_machine_is_compatible("MacRISC4")) + baud = 57600; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= pmz_ports_count) + co->index = 0; + uap = &pmz_ports[co->index]; + if (uap->node == NULL) + return -ENODEV; + port = &uap->port; + + /* + * Mark port as beeing a console + */ + uap->flags |= PMACZILOG_FLAG_IS_CONS; + + /* + * Temporary fix for uart layer who didn't setup the spinlock yet + */ + spin_lock_init(&port->lock); + + /* + * Enable the hardware + */ + pwr_delay = __pmz_startup(uap); + if (pwr_delay) + mdelay(pwr_delay); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static int __init pmz_console_init(void) +{ + /* Probe ports */ + pmz_probe(); + + /* TODO: Autoprobe console based on OF */ + /* pmz_console.index = i; */ + register_console(&pmz_console); + + return 0; + +} +console_initcall(pmz_console_init); +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + +module_init(init_pmz); +module_exit(exit_pmz); diff --git a/drivers/tty/serial/pmac_zilog.h b/drivers/tty/serial/pmac_zilog.h new file mode 100644 index 000000000000..cbc34fbb1b20 --- /dev/null +++ b/drivers/tty/serial/pmac_zilog.h @@ -0,0 +1,396 @@ +#ifndef __PMAC_ZILOG_H__ +#define __PMAC_ZILOG_H__ + +#ifdef CONFIG_PPC_PMAC +#define pmz_debug(fmt, arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg) +#define pmz_error(fmt, arg...) dev_err(&uap->dev->ofdev.dev, fmt, ## arg) +#define pmz_info(fmt, arg...) dev_info(&uap->dev->ofdev.dev, fmt, ## arg) +#else +#define pmz_debug(fmt, arg...) dev_dbg(&uap->node->dev, fmt, ## arg) +#define pmz_error(fmt, arg...) dev_err(&uap->node->dev, fmt, ## arg) +#define pmz_info(fmt, arg...) dev_info(&uap->node->dev, fmt, ## arg) +#endif + +/* + * At most 2 ESCCs with 2 ports each + */ +#define MAX_ZS_PORTS 4 + +/* + * We wrap our port structure around the generic uart_port. + */ +#define NUM_ZSREGS 17 + +struct uart_pmac_port { + struct uart_port port; + struct uart_pmac_port *mate; + +#ifdef CONFIG_PPC_PMAC + /* macio_dev for the escc holding this port (maybe be null on + * early inited port) + */ + struct macio_dev *dev; + /* device node to this port, this points to one of 2 childs + * of "escc" node (ie. ch-a or ch-b) + */ + struct device_node *node; +#else + struct platform_device *node; +#endif + + /* Port type as obtained from device tree (IRDA, modem, ...) */ + int port_type; + u8 curregs[NUM_ZSREGS]; + + unsigned int flags; +#define PMACZILOG_FLAG_IS_CONS 0x00000001 +#define PMACZILOG_FLAG_IS_KGDB 0x00000002 +#define PMACZILOG_FLAG_MODEM_STATUS 0x00000004 +#define PMACZILOG_FLAG_IS_CHANNEL_A 0x00000008 +#define PMACZILOG_FLAG_REGS_HELD 0x00000010 +#define PMACZILOG_FLAG_TX_STOPPED 0x00000020 +#define PMACZILOG_FLAG_TX_ACTIVE 0x00000040 +#define PMACZILOG_FLAG_ENABLED 0x00000080 +#define PMACZILOG_FLAG_IS_IRDA 0x00000100 +#define PMACZILOG_FLAG_IS_INTMODEM 0x00000200 +#define PMACZILOG_FLAG_HAS_DMA 0x00000400 +#define PMACZILOG_FLAG_RSRC_REQUESTED 0x00000800 +#define PMACZILOG_FLAG_IS_ASLEEP 0x00001000 +#define PMACZILOG_FLAG_IS_OPEN 0x00002000 +#define PMACZILOG_FLAG_IS_IRQ_ON 0x00004000 +#define PMACZILOG_FLAG_IS_EXTCLK 0x00008000 +#define PMACZILOG_FLAG_BREAK 0x00010000 + + unsigned char parity_mask; + unsigned char prev_status; + + volatile u8 __iomem *control_reg; + volatile u8 __iomem *data_reg; + +#ifdef CONFIG_PPC_PMAC + unsigned int tx_dma_irq; + unsigned int rx_dma_irq; + volatile struct dbdma_regs __iomem *tx_dma_regs; + volatile struct dbdma_regs __iomem *rx_dma_regs; +#endif + + struct ktermios termios_cache; +}; + +#define to_pmz(p) ((struct uart_pmac_port *)(p)) + +static inline struct uart_pmac_port *pmz_get_port_A(struct uart_pmac_port *uap) +{ + if (uap->flags & PMACZILOG_FLAG_IS_CHANNEL_A) + return uap; + return uap->mate; +} + +/* + * Register accessors. Note that we don't need to enforce a recovery + * delay on PCI PowerMac hardware, it's dealt in HW by the MacIO chip, + * though if we try to use this driver on older machines, we might have + * to add it back + */ +static inline u8 read_zsreg(struct uart_pmac_port *port, u8 reg) +{ + if (reg != 0) + writeb(reg, port->control_reg); + return readb(port->control_reg); +} + +static inline void write_zsreg(struct uart_pmac_port *port, u8 reg, u8 value) +{ + if (reg != 0) + writeb(reg, port->control_reg); + writeb(value, port->control_reg); +} + +static inline u8 read_zsdata(struct uart_pmac_port *port) +{ + return readb(port->data_reg); +} + +static inline void write_zsdata(struct uart_pmac_port *port, u8 data) +{ + writeb(data, port->data_reg); +} + +static inline void zssync(struct uart_pmac_port *port) +{ + (void)readb(port->control_reg); +} + +/* Conversion routines to/from brg time constants from/to bits + * per second. + */ +#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) +#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) + +#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */ + +/* The Zilog register set */ + +#define FLAG 0x7e + +/* Write Register 0 */ +#define R0 0 /* Register selects */ +#define R1 1 +#define R2 2 +#define R3 3 +#define R4 4 +#define R5 5 +#define R6 6 +#define R7 7 +#define R8 8 +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 +#define R7P 16 + +#define NULLCODE 0 /* Null Code */ +#define POINT_HIGH 0x8 /* Select upper half of registers */ +#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ +#define SEND_ABORT 0x18 /* HDLC Abort */ +#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ +#define RES_Tx_P 0x28 /* Reset TxINT Pending */ +#define ERR_RES 0x30 /* Error Reset */ +#define RES_H_IUS 0x38 /* Reset highest IUS */ + +#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ +#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ +#define RES_EOM_L 0xC0 /* Reset EOM latch */ + +/* Write Register 1 */ + +#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ +#define TxINT_ENAB 0x2 /* Tx Int Enable */ +#define PAR_SPEC 0x4 /* Parity is special condition */ + +#define RxINT_DISAB 0 /* Rx Int Disable */ +#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ +#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ +#define INT_ERR_Rx 0x18 /* Int on error only */ +#define RxINT_MASK 0x18 + +#define WT_RDY_RT 0x20 /* W/Req reflects recv if 1, xmit if 0 */ +#define WT_FN_RDYFN 0x40 /* W/Req pin is DMA request if 1, wait if 0 */ +#define WT_RDY_ENAB 0x80 /* Enable W/Req pin */ + +/* Write Register #2 (Interrupt Vector) */ + +/* Write Register 3 */ + +#define RxENABLE 0x1 /* Rx Enable */ +#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ +#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ +#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ +#define ENT_HM 0x10 /* Enter Hunt Mode */ +#define AUTO_ENAB 0x20 /* Auto Enables */ +#define Rx5 0x0 /* Rx 5 Bits/Character */ +#define Rx7 0x40 /* Rx 7 Bits/Character */ +#define Rx6 0x80 /* Rx 6 Bits/Character */ +#define Rx8 0xc0 /* Rx 8 Bits/Character */ +#define RxN_MASK 0xc0 + +/* Write Register 4 */ + +#define PAR_ENAB 0x1 /* Parity Enable */ +#define PAR_EVEN 0x2 /* Parity Even/Odd* */ + +#define SYNC_ENAB 0 /* Sync Modes Enable */ +#define SB1 0x4 /* 1 stop bit/char */ +#define SB15 0x8 /* 1.5 stop bits/char */ +#define SB2 0xc /* 2 stop bits/char */ +#define SB_MASK 0xc + +#define MONSYNC 0 /* 8 Bit Sync character */ +#define BISYNC 0x10 /* 16 bit sync character */ +#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ +#define EXTSYNC 0x30 /* External Sync Mode */ + +#define X1CLK 0x0 /* x1 clock mode */ +#define X16CLK 0x40 /* x16 clock mode */ +#define X32CLK 0x80 /* x32 clock mode */ +#define X64CLK 0xC0 /* x64 clock mode */ +#define XCLK_MASK 0xC0 + +/* Write Register 5 */ + +#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ +#define RTS 0x2 /* RTS */ +#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ +#define TxENABLE 0x8 /* Tx Enable */ +#define SND_BRK 0x10 /* Send Break */ +#define Tx5 0x0 /* Tx 5 bits (or less)/character */ +#define Tx7 0x20 /* Tx 7 bits/character */ +#define Tx6 0x40 /* Tx 6 bits/character */ +#define Tx8 0x60 /* Tx 8 bits/character */ +#define TxN_MASK 0x60 +#define DTR 0x80 /* DTR */ + +/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ + +/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ + +/* Write Register 7' (Some enhanced feature control) */ +#define ENEXREAD 0x40 /* Enable read of some write registers */ + +/* Write Register 8 (transmit buffer) */ + +/* Write Register 9 (Master interrupt control) */ +#define VIS 1 /* Vector Includes Status */ +#define NV 2 /* No Vector */ +#define DLC 4 /* Disable Lower Chain */ +#define MIE 8 /* Master Interrupt Enable */ +#define STATHI 0x10 /* Status high */ +#define NORESET 0 /* No reset on write to R9 */ +#define CHRB 0x40 /* Reset channel B */ +#define CHRA 0x80 /* Reset channel A */ +#define FHWRES 0xc0 /* Force hardware reset */ + +/* Write Register 10 (misc control bits) */ +#define BIT6 1 /* 6 bit/8bit sync */ +#define LOOPMODE 2 /* SDLC Loop mode */ +#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ +#define MARKIDLE 8 /* Mark/flag on idle */ +#define GAOP 0x10 /* Go active on poll */ +#define NRZ 0 /* NRZ mode */ +#define NRZI 0x20 /* NRZI mode */ +#define FM1 0x40 /* FM1 (transition = 1) */ +#define FM0 0x60 /* FM0 (transition = 0) */ +#define CRCPS 0x80 /* CRC Preset I/O */ + +/* Write Register 11 (Clock Mode control) */ +#define TRxCXT 0 /* TRxC = Xtal output */ +#define TRxCTC 1 /* TRxC = Transmit clock */ +#define TRxCBR 2 /* TRxC = BR Generator Output */ +#define TRxCDP 3 /* TRxC = DPLL output */ +#define TRxCOI 4 /* TRxC O/I */ +#define TCRTxCP 0 /* Transmit clock = RTxC pin */ +#define TCTRxCP 8 /* Transmit clock = TRxC pin */ +#define TCBR 0x10 /* Transmit clock = BR Generator output */ +#define TCDPLL 0x18 /* Transmit clock = DPLL output */ +#define RCRTxCP 0 /* Receive clock = RTxC pin */ +#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ +#define RCBR 0x40 /* Receive clock = BR Generator output */ +#define RCDPLL 0x60 /* Receive clock = DPLL output */ +#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ + +/* Write Register 12 (lower byte of baud rate generator time constant) */ + +/* Write Register 13 (upper byte of baud rate generator time constant) */ + +/* Write Register 14 (Misc control bits) */ +#define BRENAB 1 /* Baud rate generator enable */ +#define BRSRC 2 /* Baud rate generator source */ +#define DTRREQ 4 /* DTR/Request function */ +#define AUTOECHO 8 /* Auto Echo */ +#define LOOPBAK 0x10 /* Local loopback */ +#define SEARCH 0x20 /* Enter search mode */ +#define RMC 0x40 /* Reset missing clock */ +#define DISDPLL 0x60 /* Disable DPLL */ +#define SSBR 0x80 /* Set DPLL source = BR generator */ +#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ +#define SFMM 0xc0 /* Set FM mode */ +#define SNRZI 0xe0 /* Set NRZI mode */ + +/* Write Register 15 (external/status interrupt control) */ +#define EN85C30 1 /* Enable some 85c30-enhanced registers */ +#define ZCIE 2 /* Zero count IE */ +#define ENSTFIFO 4 /* Enable status FIFO (SDLC) */ +#define DCDIE 8 /* DCD IE */ +#define SYNCIE 0x10 /* Sync/hunt IE */ +#define CTSIE 0x20 /* CTS IE */ +#define TxUIE 0x40 /* Tx Underrun/EOM IE */ +#define BRKIE 0x80 /* Break/Abort IE */ + + +/* Read Register 0 */ +#define Rx_CH_AV 0x1 /* Rx Character Available */ +#define ZCOUNT 0x2 /* Zero count */ +#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ +#define DCD 0x8 /* DCD */ +#define SYNC_HUNT 0x10 /* Sync/hunt */ +#define CTS 0x20 /* CTS */ +#define TxEOM 0x40 /* Tx underrun */ +#define BRK_ABRT 0x80 /* Break/Abort */ + +/* Read Register 1 */ +#define ALL_SNT 0x1 /* All sent */ +/* Residue Data for 8 Rx bits/char programmed */ +#define RES3 0x8 /* 0/3 */ +#define RES4 0x4 /* 0/4 */ +#define RES5 0xc /* 0/5 */ +#define RES6 0x2 /* 0/6 */ +#define RES7 0xa /* 0/7 */ +#define RES8 0x6 /* 0/8 */ +#define RES18 0xe /* 1/8 */ +#define RES28 0x0 /* 2/8 */ +/* Special Rx Condition Interrupts */ +#define PAR_ERR 0x10 /* Parity error */ +#define Rx_OVR 0x20 /* Rx Overrun Error */ +#define CRC_ERR 0x40 /* CRC/Framing Error */ +#define END_FR 0x80 /* End of Frame (SDLC) */ + +/* Read Register 2 (channel b only) - Interrupt vector */ +#define CHB_Tx_EMPTY 0x00 +#define CHB_EXT_STAT 0x02 +#define CHB_Rx_AVAIL 0x04 +#define CHB_SPECIAL 0x06 +#define CHA_Tx_EMPTY 0x08 +#define CHA_EXT_STAT 0x0a +#define CHA_Rx_AVAIL 0x0c +#define CHA_SPECIAL 0x0e +#define STATUS_MASK 0x06 + +/* Read Register 3 (interrupt pending register) ch a only */ +#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ +#define CHBTxIP 0x2 /* Channel B Tx IP */ +#define CHBRxIP 0x4 /* Channel B Rx IP */ +#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ +#define CHATxIP 0x10 /* Channel A Tx IP */ +#define CHARxIP 0x20 /* Channel A Rx IP */ + +/* Read Register 8 (receive data register) */ + +/* Read Register 10 (misc status bits) */ +#define ONLOOP 2 /* On loop */ +#define LOOPSEND 0x10 /* Loop sending */ +#define CLK2MIS 0x40 /* Two clocks missing */ +#define CLK1MIS 0x80 /* One clock missing */ + +/* Read Register 12 (lower byte of baud rate generator constant) */ + +/* Read Register 13 (upper byte of baud rate generator constant) */ + +/* Read Register 15 (value of WR 15) */ + +/* Misc macros */ +#define ZS_CLEARERR(port) (write_zsreg(port, 0, ERR_RES)) +#define ZS_CLEARFIFO(port) do { volatile unsigned char garbage; \ + garbage = read_zsdata(port); \ + garbage = read_zsdata(port); \ + garbage = read_zsdata(port); \ + } while(0) + +#define ZS_IS_CONS(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CONS) +#define ZS_IS_KGDB(UP) ((UP)->flags & PMACZILOG_FLAG_IS_KGDB) +#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CHANNEL_A) +#define ZS_REGS_HELD(UP) ((UP)->flags & PMACZILOG_FLAG_REGS_HELD) +#define ZS_TX_STOPPED(UP) ((UP)->flags & PMACZILOG_FLAG_TX_STOPPED) +#define ZS_TX_ACTIVE(UP) ((UP)->flags & PMACZILOG_FLAG_TX_ACTIVE) +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & PMACZILOG_FLAG_MODEM_STATUS) +#define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA) +#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM) +#define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA) +#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP) +#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN) +#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON) +#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK) + +#endif /* __PMAC_ZILOG_H__ */ diff --git a/drivers/tty/serial/pnx8xxx_uart.c b/drivers/tty/serial/pnx8xxx_uart.c new file mode 100644 index 000000000000..0aa75a97531c --- /dev/null +++ b/drivers/tty/serial/pnx8xxx_uart.c @@ -0,0 +1,854 @@ +/* + * UART driver for PNX8XXX SoCs + * + * Author: Per Hallsmark per.hallsmark@mvista.com + * Ported to 2.6 kernel by EmbeddedAlley + * Reworked by Vitaly Wool + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of + * any kind, whether express or implied. + * + */ + +#if defined(CONFIG_SERIAL_PNX8XXX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* We'll be using StrongARM sa1100 serial port major/minor */ +#define SERIAL_PNX8XXX_MAJOR 204 +#define MINOR_START 5 + +#define NR_PORTS 2 + +#define PNX8XXX_ISR_PASS_LIMIT 256 + +/* + * Convert from ignore_status_mask or read_status_mask to FIFO + * and interrupt status bits + */ +#define SM_TO_FIFO(x) ((x) >> 10) +#define SM_TO_ISTAT(x) ((x) & 0x000001ff) +#define FIFO_TO_SM(x) ((x) << 10) +#define ISTAT_TO_SM(x) ((x) & 0x000001ff) + +/* + * This is the size of our serial port register set. + */ +#define UART_PORT_SIZE 0x1000 + +/* + * This determines how often we check the modem status signals + * for any change. They generally aren't connected to an IRQ + * so we have to poll them. We also check immediately before + * filling the TX fifo incase CTS has been dropped. + */ +#define MCTRL_TIMEOUT (250*HZ/1000) + +extern struct pnx8xxx_port pnx8xxx_ports[]; + +static inline int serial_in(struct pnx8xxx_port *sport, int offset) +{ + return (__raw_readl(sport->port.membase + offset)); +} + +static inline void serial_out(struct pnx8xxx_port *sport, int offset, int value) +{ + __raw_writel(value, sport->port.membase + offset); +} + +/* + * Handle any change of modem status signal since we were last called. + */ +static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport) +{ + unsigned int status, changed; + + status = sport->port.ops->get_mctrl(&sport->port); + changed = status ^ sport->old_status; + + if (changed == 0) + return; + + sport->old_status = status; + + if (changed & TIOCM_RI) + sport->port.icount.rng++; + if (changed & TIOCM_DSR) + sport->port.icount.dsr++; + if (changed & TIOCM_CAR) + uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); + if (changed & TIOCM_CTS) + uart_handle_cts_change(&sport->port, status & TIOCM_CTS); + + wake_up_interruptible(&sport->port.state->port.delta_msr_wait); +} + +/* + * This is our per-port timeout handler, for checking the + * modem status signals. + */ +static void pnx8xxx_timeout(unsigned long data) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)data; + unsigned long flags; + + if (sport->port.state) { + spin_lock_irqsave(&sport->port.lock, flags); + pnx8xxx_mctrl_check(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); + + mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); + } +} + +/* + * interrupts disabled on entry + */ +static void pnx8xxx_stop_tx(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + u32 ien; + + /* Disable TX intr */ + ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLTX); + + /* Clear all pending TX intr */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX); +} + +/* + * interrupts may not be disabled on entry + */ +static void pnx8xxx_start_tx(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + u32 ien; + + /* Clear all pending TX intr */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX); + + /* Enable TX intr */ + ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, ien | PNX8XXX_UART_INT_ALLTX); +} + +/* + * Interrupts enabled + */ +static void pnx8xxx_stop_rx(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + u32 ien; + + /* Disable RX intr */ + ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLRX); + + /* Clear all pending RX intr */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX); +} + +/* + * Set the modem control timer to fire immediately. + */ +static void pnx8xxx_enable_ms(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + + mod_timer(&sport->timer, jiffies); +} + +static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport) +{ + struct tty_struct *tty = sport->port.state->port.tty; + unsigned int status, ch, flg; + + status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | + ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); + while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) { + ch = serial_in(sport, PNX8XXX_FIFO) & 0xff; + + sport->port.icount.rx++; + + flg = TTY_NORMAL; + + /* + * note that the error handling code is + * out of the main execution path + */ + if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE | + PNX8XXX_UART_FIFO_RXPAR | + PNX8XXX_UART_FIFO_RXBRK) | + ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) { + if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXBRK)) { + status &= ~(FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)); + sport->port.icount.brk++; + if (uart_handle_break(&sport->port)) + goto ignore_char; + } else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)) + sport->port.icount.parity++; + else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE)) + sport->port.icount.frame++; + if (status & ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN)) + sport->port.icount.overrun++; + + status &= sport->port.read_status_mask; + + if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR)) + flg = TTY_PARITY; + else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE)) + flg = TTY_FRAME; + +#ifdef SUPPORT_SYSRQ + sport->port.sysrq = 0; +#endif + } + + if (uart_handle_sysrq_char(&sport->port, ch)) + goto ignore_char; + + uart_insert_char(&sport->port, status, + ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN), ch, flg); + + ignore_char: + serial_out(sport, PNX8XXX_LCR, serial_in(sport, PNX8XXX_LCR) | + PNX8XXX_UART_LCR_RX_NEXT); + status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) | + ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT)); + } + tty_flip_buffer_push(tty); +} + +static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + + if (sport->port.x_char) { + serial_out(sport, PNX8XXX_FIFO, sport->port.x_char); + sport->port.icount.tx++; + sport->port.x_char = 0; + return; + } + + /* + * Check the modem control lines before + * transmitting anything. + */ + pnx8xxx_mctrl_check(sport); + + if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { + pnx8xxx_stop_tx(&sport->port); + return; + } + + /* + * TX while bytes available + */ + while (((serial_in(sport, PNX8XXX_FIFO) & + PNX8XXX_UART_FIFO_TXFIFO) >> 16) < 16) { + serial_out(sport, PNX8XXX_FIFO, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + pnx8xxx_stop_tx(&sport->port); +} + +static irqreturn_t pnx8xxx_int(int irq, void *dev_id) +{ + struct pnx8xxx_port *sport = dev_id; + unsigned int status; + + spin_lock(&sport->port.lock); + /* Get the interrupts */ + status = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN); + + /* Byte or break signal received */ + if (status & (PNX8XXX_UART_INT_RX | PNX8XXX_UART_INT_BREAK)) + pnx8xxx_rx_chars(sport); + + /* TX holding register empty - transmit a byte */ + if (status & PNX8XXX_UART_INT_TX) + pnx8xxx_tx_chars(sport); + + /* Clear the ISTAT register */ + serial_out(sport, PNX8XXX_ICLR, status); + + spin_unlock(&sport->port.lock); + return IRQ_HANDLED; +} + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int pnx8xxx_tx_empty(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + + return serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA ? 0 : TIOCSER_TEMT; +} + +static unsigned int pnx8xxx_get_mctrl(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + unsigned int mctrl = TIOCM_DSR; + unsigned int msr; + + /* REVISIT */ + + msr = serial_in(sport, PNX8XXX_MCR); + + mctrl |= msr & PNX8XXX_UART_MCR_CTS ? TIOCM_CTS : 0; + mctrl |= msr & PNX8XXX_UART_MCR_DCD ? TIOCM_CAR : 0; + + return mctrl; +} + +static void pnx8xxx_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +#if 0 /* FIXME */ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + unsigned int msr; +#endif +} + +/* + * Interrupts always disabled. + */ +static void pnx8xxx_break_ctl(struct uart_port *port, int break_state) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + unsigned long flags; + unsigned int lcr; + + spin_lock_irqsave(&sport->port.lock, flags); + lcr = serial_in(sport, PNX8XXX_LCR); + if (break_state == -1) + lcr |= PNX8XXX_UART_LCR_TXBREAK; + else + lcr &= ~PNX8XXX_UART_LCR_TXBREAK; + serial_out(sport, PNX8XXX_LCR, lcr); + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static int pnx8xxx_startup(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + int retval; + + /* + * Allocate the IRQ + */ + retval = request_irq(sport->port.irq, pnx8xxx_int, 0, + "pnx8xxx-uart", sport); + if (retval) + return retval; + + /* + * Finally, clear and enable interrupts + */ + + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX | + PNX8XXX_UART_INT_ALLTX); + + serial_out(sport, PNX8XXX_IEN, serial_in(sport, PNX8XXX_IEN) | + PNX8XXX_UART_INT_ALLRX | + PNX8XXX_UART_INT_ALLTX); + + /* + * Enable modem status interrupts + */ + spin_lock_irq(&sport->port.lock); + pnx8xxx_enable_ms(&sport->port); + spin_unlock_irq(&sport->port.lock); + + return 0; +} + +static void pnx8xxx_shutdown(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + int lcr; + + /* + * Stop our timer. + */ + del_timer_sync(&sport->timer); + + /* + * Disable all interrupts + */ + serial_out(sport, PNX8XXX_IEN, 0); + + /* + * Reset the Tx and Rx FIFOS, disable the break condition + */ + lcr = serial_in(sport, PNX8XXX_LCR); + lcr &= ~PNX8XXX_UART_LCR_TXBREAK; + lcr |= PNX8XXX_UART_LCR_TX_RST | PNX8XXX_UART_LCR_RX_RST; + serial_out(sport, PNX8XXX_LCR, lcr); + + /* + * Clear all interrupts + */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX | + PNX8XXX_UART_INT_ALLTX); + + /* + * Free the interrupt + */ + free_irq(sport->port.irq, sport); +} + +static void +pnx8xxx_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + unsigned long flags; + unsigned int lcr_fcr, old_ien, baud, quot; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + + /* + * We only support CS7 and CS8. + */ + while ((termios->c_cflag & CSIZE) != CS7 && + (termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8) + lcr_fcr = PNX8XXX_UART_LCR_8BIT; + else + lcr_fcr = 0; + + if (termios->c_cflag & CSTOPB) + lcr_fcr |= PNX8XXX_UART_LCR_2STOPB; + if (termios->c_cflag & PARENB) { + lcr_fcr |= PNX8XXX_UART_LCR_PAREN; + if (!(termios->c_cflag & PARODD)) + lcr_fcr |= PNX8XXX_UART_LCR_PAREVN; + } + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask = ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN) | + ISTAT_TO_SM(PNX8XXX_UART_INT_EMPTY) | + ISTAT_TO_SM(PNX8XXX_UART_INT_RX); + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR); + if (termios->c_iflag & (BRKINT | PARMRK)) + sport->port.read_status_mask |= + ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK); + + /* + * Characters to ignore + */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) | + FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR); + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= + ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK); + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= + ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN); + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + sport->port.ignore_status_mask |= + ISTAT_TO_SM(PNX8XXX_UART_INT_RX); + + del_timer_sync(&sport->timer); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * disable interrupts and drain transmitter + */ + old_ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX | + PNX8XXX_UART_INT_ALLRX)); + + while (serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA) + barrier(); + + /* then, disable everything */ + serial_out(sport, PNX8XXX_IEN, 0); + + /* Reset the Rx and Tx FIFOs too */ + lcr_fcr |= PNX8XXX_UART_LCR_TX_RST; + lcr_fcr |= PNX8XXX_UART_LCR_RX_RST; + + /* set the parity, stop bits and data size */ + serial_out(sport, PNX8XXX_LCR, lcr_fcr); + + /* set the baud rate */ + quot -= 1; + serial_out(sport, PNX8XXX_BAUD, quot); + + serial_out(sport, PNX8XXX_ICLR, -1); + + serial_out(sport, PNX8XXX_IEN, old_ien); + + if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) + pnx8xxx_enable_ms(&sport->port); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static const char *pnx8xxx_type(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + + return sport->port.type == PORT_PNX8XXX ? "PNX8XXX" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void pnx8xxx_release_port(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + + release_mem_region(sport->port.mapbase, UART_PORT_SIZE); +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int pnx8xxx_request_port(struct uart_port *port) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + return request_mem_region(sport->port.mapbase, UART_PORT_SIZE, + "pnx8xxx-uart") != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void pnx8xxx_config_port(struct uart_port *port, int flags) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + + if (flags & UART_CONFIG_TYPE && + pnx8xxx_request_port(&sport->port) == 0) + sport->port.type = PORT_PNX8XXX; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + * The only change we allow are to the flags and type, and + * even then only between PORT_PNX8XXX and PORT_UNKNOWN + */ +static int +pnx8xxx_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_PNX8XXX) + ret = -EINVAL; + if (sport->port.irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != SERIAL_IO_MEM) + ret = -EINVAL; + if (sport->port.uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if ((void *)sport->port.mapbase != ser->iomem_base) + ret = -EINVAL; + if (sport->port.iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +static struct uart_ops pnx8xxx_pops = { + .tx_empty = pnx8xxx_tx_empty, + .set_mctrl = pnx8xxx_set_mctrl, + .get_mctrl = pnx8xxx_get_mctrl, + .stop_tx = pnx8xxx_stop_tx, + .start_tx = pnx8xxx_start_tx, + .stop_rx = pnx8xxx_stop_rx, + .enable_ms = pnx8xxx_enable_ms, + .break_ctl = pnx8xxx_break_ctl, + .startup = pnx8xxx_startup, + .shutdown = pnx8xxx_shutdown, + .set_termios = pnx8xxx_set_termios, + .type = pnx8xxx_type, + .release_port = pnx8xxx_release_port, + .request_port = pnx8xxx_request_port, + .config_port = pnx8xxx_config_port, + .verify_port = pnx8xxx_verify_port, +}; + + +/* + * Setup the PNX8XXX serial ports. + * + * Note also that we support "console=ttySx" where "x" is either 0 or 1. + */ +static void __init pnx8xxx_init_ports(void) +{ + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0; i < NR_PORTS; i++) { + init_timer(&pnx8xxx_ports[i].timer); + pnx8xxx_ports[i].timer.function = pnx8xxx_timeout; + pnx8xxx_ports[i].timer.data = (unsigned long)&pnx8xxx_ports[i]; + pnx8xxx_ports[i].port.ops = &pnx8xxx_pops; + } +} + +#ifdef CONFIG_SERIAL_PNX8XXX_CONSOLE + +static void pnx8xxx_console_putchar(struct uart_port *port, int ch) +{ + struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port; + int status; + + do { + /* Wait for UART_TX register to empty */ + status = serial_in(sport, PNX8XXX_FIFO); + } while (status & PNX8XXX_UART_FIFO_TXFIFO); + serial_out(sport, PNX8XXX_FIFO, ch); +} + +/* + * Interrupts are disabled on entering + */static void +pnx8xxx_console_write(struct console *co, const char *s, unsigned int count) +{ + struct pnx8xxx_port *sport = &pnx8xxx_ports[co->index]; + unsigned int old_ien, status; + + /* + * First, save IEN and then disable interrupts + */ + old_ien = serial_in(sport, PNX8XXX_IEN); + serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX | + PNX8XXX_UART_INT_ALLRX)); + + uart_console_write(&sport->port, s, count, pnx8xxx_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore IEN + */ + do { + /* Wait for UART_TX register to empty */ + status = serial_in(sport, PNX8XXX_FIFO); + } while (status & PNX8XXX_UART_FIFO_TXFIFO); + + /* Clear TX and EMPTY interrupt */ + serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_TX | + PNX8XXX_UART_INT_EMPTY); + + serial_out(sport, PNX8XXX_IEN, old_ien); +} + +static int __init +pnx8xxx_console_setup(struct console *co, char *options) +{ + struct pnx8xxx_port *sport; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= NR_PORTS) + co->index = 0; + sport = &pnx8xxx_ports[co->index]; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver pnx8xxx_reg; +static struct console pnx8xxx_console = { + .name = "ttyS", + .write = pnx8xxx_console_write, + .device = uart_console_device, + .setup = pnx8xxx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &pnx8xxx_reg, +}; + +static int __init pnx8xxx_rs_console_init(void) +{ + pnx8xxx_init_ports(); + register_console(&pnx8xxx_console); + return 0; +} +console_initcall(pnx8xxx_rs_console_init); + +#define PNX8XXX_CONSOLE &pnx8xxx_console +#else +#define PNX8XXX_CONSOLE NULL +#endif + +static struct uart_driver pnx8xxx_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyS", + .dev_name = "ttyS", + .major = SERIAL_PNX8XXX_MAJOR, + .minor = MINOR_START, + .nr = NR_PORTS, + .cons = PNX8XXX_CONSOLE, +}; + +static int pnx8xxx_serial_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct pnx8xxx_port *sport = platform_get_drvdata(pdev); + + return uart_suspend_port(&pnx8xxx_reg, &sport->port); +} + +static int pnx8xxx_serial_resume(struct platform_device *pdev) +{ + struct pnx8xxx_port *sport = platform_get_drvdata(pdev); + + return uart_resume_port(&pnx8xxx_reg, &sport->port); +} + +static int pnx8xxx_serial_probe(struct platform_device *pdev) +{ + struct resource *res = pdev->resource; + int i; + + for (i = 0; i < pdev->num_resources; i++, res++) { + if (!(res->flags & IORESOURCE_MEM)) + continue; + + for (i = 0; i < NR_PORTS; i++) { + if (pnx8xxx_ports[i].port.mapbase != res->start) + continue; + + pnx8xxx_ports[i].port.dev = &pdev->dev; + uart_add_one_port(&pnx8xxx_reg, &pnx8xxx_ports[i].port); + platform_set_drvdata(pdev, &pnx8xxx_ports[i]); + break; + } + } + + return 0; +} + +static int pnx8xxx_serial_remove(struct platform_device *pdev) +{ + struct pnx8xxx_port *sport = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + if (sport) + uart_remove_one_port(&pnx8xxx_reg, &sport->port); + + return 0; +} + +static struct platform_driver pnx8xxx_serial_driver = { + .driver = { + .name = "pnx8xxx-uart", + .owner = THIS_MODULE, + }, + .probe = pnx8xxx_serial_probe, + .remove = pnx8xxx_serial_remove, + .suspend = pnx8xxx_serial_suspend, + .resume = pnx8xxx_serial_resume, +}; + +static int __init pnx8xxx_serial_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: PNX8XXX driver\n"); + + pnx8xxx_init_ports(); + + ret = uart_register_driver(&pnx8xxx_reg); + if (ret == 0) { + ret = platform_driver_register(&pnx8xxx_serial_driver); + if (ret) + uart_unregister_driver(&pnx8xxx_reg); + } + return ret; +} + +static void __exit pnx8xxx_serial_exit(void) +{ + platform_driver_unregister(&pnx8xxx_serial_driver); + uart_unregister_driver(&pnx8xxx_reg); +} + +module_init(pnx8xxx_serial_init); +module_exit(pnx8xxx_serial_exit); + +MODULE_AUTHOR("Embedded Alley Solutions, Inc."); +MODULE_DESCRIPTION("PNX8XXX SoCs serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_PNX8XXX_MAJOR); +MODULE_ALIAS("platform:pnx8xxx-uart"); diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c new file mode 100644 index 000000000000..1102a39b44f5 --- /dev/null +++ b/drivers/tty/serial/pxa.c @@ -0,0 +1,879 @@ +/* + * linux/drivers/serial/pxa.c + * + * Based on drivers/serial/8250.c by Russell King. + * + * Author: Nicolas Pitre + * Created: Feb 20, 2003 + * Copyright: (C) 2003 Monta Vista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Note 1: This driver is made separate from the already too overloaded + * 8250.c because it needs some kirks of its own and that'll make it + * easier to add DMA support. + * + * Note 2: I'm too sick of device allocation policies for serial ports. + * If someone else wants to request an "official" allocation of major/minor + * for this driver please be my guest. And don't forget that new hardware + * to come from Intel might have more than 3 or 4 of those UARTs. Let's + * hope for a better port registration and dynamic device allocation scheme + * with the serial core maintainer satisfaction to appear soon. + */ + + +#if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct uart_pxa_port { + struct uart_port port; + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned int lsr_break_flag; + struct clk *clk; + char *name; +}; + +static inline unsigned int serial_in(struct uart_pxa_port *up, int offset) +{ + offset <<= 2; + return readl(up->port.membase + offset); +} + +static inline void serial_out(struct uart_pxa_port *up, int offset, int value) +{ + offset <<= 2; + writel(value, up->port.membase + offset); +} + +static void serial_pxa_enable_ms(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static void serial_pxa_stop_tx(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_pxa_stop_rx(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static inline void receive_chars(struct uart_pxa_port *up, int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned int ch, flag; + int max_count = 256; + + do { + ch = serial_in(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ignored. + */ + *status &= up->port.read_status_mask; + +#ifdef CONFIG_SERIAL_PXA_CONSOLE + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } +#endif + if (*status & UART_LSR_BI) { + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + + uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); + + ignore_char: + *status = serial_in(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + tty_flip_buffer_push(tty); +} + +static void transmit_chars(struct uart_pxa_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_out(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_pxa_stop_tx(&up->port); + return; + } + + count = up->port.fifosize / 2; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + + if (uart_circ_empty(xmit)) + serial_pxa_stop_tx(&up->port); +} + +static void serial_pxa_start_tx(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static inline void check_modem_status(struct uart_pxa_port *up) +{ + int status; + + status = serial_in(up, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); +} + +/* + * This handles the interrupt from one port. + */ +static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id) +{ + struct uart_pxa_port *up = dev_id; + unsigned int iir, lsr; + + iir = serial_in(up, UART_IIR); + if (iir & UART_IIR_NO_INT) + return IRQ_NONE; + lsr = serial_in(up, UART_LSR); + if (lsr & UART_LSR_DR) + receive_chars(up, &lsr); + check_modem_status(up); + if (lsr & UART_LSR_THRE) + transmit_chars(up); + return IRQ_HANDLED; +} + +static unsigned int serial_pxa_tx_empty(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_pxa_get_mctrl(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char status; + unsigned int ret; + + status = serial_in(up, UART_MSR); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr |= up->mcr; + + serial_out(up, UART_MCR, mcr); +} + +static void serial_pxa_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +#if 0 +static void serial_pxa_dma_init(struct pxa_uart *up) +{ + up->rxdma = + pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up); + if (up->rxdma < 0) + goto out; + up->txdma = + pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up); + if (up->txdma < 0) + goto err_txdma; + up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL); + if (!up->dmadesc) + goto err_alloc; + + /* ... */ +err_alloc: + pxa_free_dma(up->txdma); +err_rxdma: + pxa_free_dma(up->rxdma); +out: + return; +} +#endif + +static int serial_pxa_startup(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + int retval; + + if (port->line == 3) /* HWUART */ + up->mcr |= UART_MCR_AFE; + else + up->mcr = 0; + + up->port.uartclk = clk_get_rate(up->clk); + + /* + * Allocate the IRQ + */ + retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up); + if (retval) + return retval; + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); + + /* + * Clear the interrupt registers. + */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + /* + * Now, initialize the UART + */ + serial_out(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl |= TIOCM_OUT2; + serial_pxa_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE; + serial_out(up, UART_IER, up->ier); + + /* + * And clear the interrupt registers again for luck. + */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + return 0; +} + +static void serial_pxa_shutdown(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + + free_irq(up->port.irq, up); + + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_out(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl &= ~TIOCM_OUT2; + serial_pxa_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); +} + +static void +serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + unsigned int dll; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + if ((up->port.uartclk / quot) < (2400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1; + else if ((up->port.uartclk / quot) < (230400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8; + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Ensure the port will be enabled. + * This is required especially for serial console. + */ + up->ier |= UART_IER_UUE; + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characters to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + if (termios->c_cflag & CRTSCTS) + up->mcr |= UART_MCR_AFE; + else + up->mcr &= ~UART_MCR_AFE; + + serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ + serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ + + /* + * work around Errata #75 according to Intel(R) PXA27x Processor Family + * Specification Update (Nov 2005) + */ + dll = serial_in(up, UART_DLL); + WARN_ON(dll != (quot & 0xff)); + + serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + serial_out(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; /* Save LCR */ + serial_pxa_set_mctrl(&up->port, up->port.mctrl); + serial_out(up, UART_FCR, fcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +serial_pxa_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + if (!state) + clk_enable(up->clk); + else + clk_disable(up->clk); +} + +static void serial_pxa_release_port(struct uart_port *port) +{ +} + +static int serial_pxa_request_port(struct uart_port *port) +{ + return 0; +} + +static void serial_pxa_config_port(struct uart_port *port, int flags) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + up->port.type = PORT_PXA; +} + +static int +serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + +static const char * +serial_pxa_type(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + return up->name; +} + +static struct uart_pxa_port *serial_pxa_ports[4]; +static struct uart_driver serial_pxa_reg; + +#ifdef CONFIG_SERIAL_PXA_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * Wait for transmitter & holding register to empty + */ +static inline void wait_for_xmitr(struct uart_pxa_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + udelay(1); + } +} + +static void serial_pxa_console_putchar(struct uart_port *port, int ch) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial_pxa_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_pxa_port *up = serial_pxa_ports[co->index]; + unsigned int ier; + + clk_enable(up->clk); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, UART_IER_UUE); + + uart_console_write(&up->port, s, count, serial_pxa_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); + + clk_disable(up->clk); +} + +static int __init +serial_pxa_console_setup(struct console *co, char *options) +{ + struct uart_pxa_port *up; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index == -1 || co->index >= serial_pxa_reg.nr) + co->index = 0; + up = serial_pxa_ports[co->index]; + if (!up) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&up->port, co, baud, parity, bits, flow); +} + +static struct console serial_pxa_console = { + .name = "ttyS", + .write = serial_pxa_console_write, + .device = uart_console_device, + .setup = serial_pxa_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_pxa_reg, +}; + +#define PXA_CONSOLE &serial_pxa_console +#else +#define PXA_CONSOLE NULL +#endif + +struct uart_ops serial_pxa_pops = { + .tx_empty = serial_pxa_tx_empty, + .set_mctrl = serial_pxa_set_mctrl, + .get_mctrl = serial_pxa_get_mctrl, + .stop_tx = serial_pxa_stop_tx, + .start_tx = serial_pxa_start_tx, + .stop_rx = serial_pxa_stop_rx, + .enable_ms = serial_pxa_enable_ms, + .break_ctl = serial_pxa_break_ctl, + .startup = serial_pxa_startup, + .shutdown = serial_pxa_shutdown, + .set_termios = serial_pxa_set_termios, + .pm = serial_pxa_pm, + .type = serial_pxa_type, + .release_port = serial_pxa_release_port, + .request_port = serial_pxa_request_port, + .config_port = serial_pxa_config_port, + .verify_port = serial_pxa_verify_port, +}; + +static struct uart_driver serial_pxa_reg = { + .owner = THIS_MODULE, + .driver_name = "PXA serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = 4, + .cons = PXA_CONSOLE, +}; + +#ifdef CONFIG_PM +static int serial_pxa_suspend(struct device *dev) +{ + struct uart_pxa_port *sport = dev_get_drvdata(dev); + + if (sport) + uart_suspend_port(&serial_pxa_reg, &sport->port); + + return 0; +} + +static int serial_pxa_resume(struct device *dev) +{ + struct uart_pxa_port *sport = dev_get_drvdata(dev); + + if (sport) + uart_resume_port(&serial_pxa_reg, &sport->port); + + return 0; +} + +static const struct dev_pm_ops serial_pxa_pm_ops = { + .suspend = serial_pxa_suspend, + .resume = serial_pxa_resume, +}; +#endif + +static int serial_pxa_probe(struct platform_device *dev) +{ + struct uart_pxa_port *sport; + struct resource *mmres, *irqres; + int ret; + + mmres = platform_get_resource(dev, IORESOURCE_MEM, 0); + irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0); + if (!mmres || !irqres) + return -ENODEV; + + sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL); + if (!sport) + return -ENOMEM; + + sport->clk = clk_get(&dev->dev, NULL); + if (IS_ERR(sport->clk)) { + ret = PTR_ERR(sport->clk); + goto err_free; + } + + sport->port.type = PORT_PXA; + sport->port.iotype = UPIO_MEM; + sport->port.mapbase = mmres->start; + sport->port.irq = irqres->start; + sport->port.fifosize = 64; + sport->port.ops = &serial_pxa_pops; + sport->port.line = dev->id; + sport->port.dev = &dev->dev; + sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; + sport->port.uartclk = clk_get_rate(sport->clk); + + switch (dev->id) { + case 0: sport->name = "FFUART"; break; + case 1: sport->name = "BTUART"; break; + case 2: sport->name = "STUART"; break; + case 3: sport->name = "HWUART"; break; + default: + sport->name = "???"; + break; + } + + sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1); + if (!sport->port.membase) { + ret = -ENOMEM; + goto err_clk; + } + + serial_pxa_ports[dev->id] = sport; + + uart_add_one_port(&serial_pxa_reg, &sport->port); + platform_set_drvdata(dev, sport); + + return 0; + + err_clk: + clk_put(sport->clk); + err_free: + kfree(sport); + return ret; +} + +static int serial_pxa_remove(struct platform_device *dev) +{ + struct uart_pxa_port *sport = platform_get_drvdata(dev); + + platform_set_drvdata(dev, NULL); + + uart_remove_one_port(&serial_pxa_reg, &sport->port); + clk_put(sport->clk); + kfree(sport); + + return 0; +} + +static struct platform_driver serial_pxa_driver = { + .probe = serial_pxa_probe, + .remove = serial_pxa_remove, + + .driver = { + .name = "pxa2xx-uart", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &serial_pxa_pm_ops, +#endif + }, +}; + +int __init serial_pxa_init(void) +{ + int ret; + + ret = uart_register_driver(&serial_pxa_reg); + if (ret != 0) + return ret; + + ret = platform_driver_register(&serial_pxa_driver); + if (ret != 0) + uart_unregister_driver(&serial_pxa_reg); + + return ret; +} + +void __exit serial_pxa_exit(void) +{ + platform_driver_unregister(&serial_pxa_driver); + uart_unregister_driver(&serial_pxa_reg); +} + +module_init(serial_pxa_init); +module_exit(serial_pxa_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa2xx-uart"); diff --git a/drivers/tty/serial/s3c2400.c b/drivers/tty/serial/s3c2400.c new file mode 100644 index 000000000000..fed1a9a1ffb4 --- /dev/null +++ b/drivers/tty/serial/s3c2400.c @@ -0,0 +1,106 @@ +/* linux/drivers/serial/s3c240.c + * + * Driver for Samsung SoC onboard UARTs. + * + * Ben Dooks, Copyright (c) 2003-2005 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include + +#include + +#include + +#include +#include + +#include "samsung.h" + +static int s3c2400_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + clk->divisor = 1; + clk->name = "pclk"; + + return 0; +} + +static int s3c2400_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + return 0; +} + +static int s3c2400_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + dbg("s3c2400_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + wr_regl(port, S3C2410_UCON, cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c2400_uart_inf = { + .name = "Samsung S3C2400 UART", + .type = PORT_S3C2400, + .fifosize = 16, + .rx_fifomask = S3C2410_UFSTAT_RXMASK, + .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2410_UFSTAT_RXFULL, + .tx_fifofull = S3C2410_UFSTAT_TXFULL, + .tx_fifomask = S3C2410_UFSTAT_TXMASK, + .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, + .get_clksrc = s3c2400_serial_getsource, + .set_clksrc = s3c2400_serial_setsource, + .reset_port = s3c2400_serial_resetport, +}; + +static int s3c2400_serial_probe(struct platform_device *dev) +{ + return s3c24xx_serial_probe(dev, &s3c2400_uart_inf); +} + +static struct platform_driver s3c2400_serial_driver = { + .probe = s3c2400_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s3c2400-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c2400_serial_driver, &s3c2400_uart_inf); + +static inline int s3c2400_serial_init(void) +{ + return s3c24xx_serial_init(&s3c2400_serial_driver, &s3c2400_uart_inf); +} + +static inline void s3c2400_serial_exit(void) +{ + platform_driver_unregister(&s3c2400_serial_driver); +} + +module_init(s3c2400_serial_init); +module_exit(s3c2400_serial_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_DESCRIPTION("Samsung S3C2400 SoC Serial port driver"); +MODULE_ALIAS("platform:s3c2400-uart"); diff --git a/drivers/tty/serial/s3c2410.c b/drivers/tty/serial/s3c2410.c new file mode 100644 index 000000000000..73f089d3efd6 --- /dev/null +++ b/drivers/tty/serial/s3c2410.c @@ -0,0 +1,118 @@ +/* linux/drivers/serial/s3c2410.c + * + * Driver for Samsung S3C2410 SoC onboard UARTs. + * + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include "samsung.h" + +static int s3c2410_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if (strcmp(clk->name, "uclk") == 0) + ucon |= S3C2410_UCON_UCLK; + else + ucon &= ~S3C2410_UCON_UCLK; + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + +static int s3c2410_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk"; + + return 0; +} + +static int s3c2410_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + dbg("s3c2410_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + wr_regl(port, S3C2410_UCON, cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c2410_uart_inf = { + .name = "Samsung S3C2410 UART", + .type = PORT_S3C2410, + .fifosize = 16, + .rx_fifomask = S3C2410_UFSTAT_RXMASK, + .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2410_UFSTAT_RXFULL, + .tx_fifofull = S3C2410_UFSTAT_TXFULL, + .tx_fifomask = S3C2410_UFSTAT_TXMASK, + .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, + .get_clksrc = s3c2410_serial_getsource, + .set_clksrc = s3c2410_serial_setsource, + .reset_port = s3c2410_serial_resetport, +}; + +static int s3c2410_serial_probe(struct platform_device *dev) +{ + return s3c24xx_serial_probe(dev, &s3c2410_uart_inf); +} + +static struct platform_driver s3c2410_serial_driver = { + .probe = s3c2410_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s3c2410-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c2410_serial_driver, &s3c2410_uart_inf); + +static int __init s3c2410_serial_init(void) +{ + return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf); +} + +static void __exit s3c2410_serial_exit(void) +{ + platform_driver_unregister(&s3c2410_serial_driver); +} + +module_init(s3c2410_serial_init); +module_exit(s3c2410_serial_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_DESCRIPTION("Samsung S3C2410 SoC Serial port driver"); +MODULE_ALIAS("platform:s3c2410-uart"); diff --git a/drivers/tty/serial/s3c2412.c b/drivers/tty/serial/s3c2412.c new file mode 100644 index 000000000000..1700b1a2fb7e --- /dev/null +++ b/drivers/tty/serial/s3c2412.c @@ -0,0 +1,152 @@ +/* linux/drivers/serial/s3c2412.c + * + * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs. + * + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include "samsung.h" + +static int s3c2412_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + ucon &= ~S3C2412_UCON_CLKMASK; + + if (strcmp(clk->name, "uclk") == 0) + ucon |= S3C2440_UCON_UCLK; + else if (strcmp(clk->name, "pclk") == 0) + ucon |= S3C2440_UCON_PCLK; + else if (strcmp(clk->name, "usysclk") == 0) + ucon |= S3C2412_UCON_USYSCLK; + else { + printk(KERN_ERR "unknown clock source %s\n", clk->name); + return -EINVAL; + } + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + + +static int s3c2412_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + switch (ucon & S3C2412_UCON_CLKMASK) { + case S3C2412_UCON_UCLK: + clk->divisor = 1; + clk->name = "uclk"; + break; + + case S3C2412_UCON_PCLK: + case S3C2412_UCON_PCLK2: + clk->divisor = 1; + clk->name = "pclk"; + break; + + case S3C2412_UCON_USYSCLK: + clk->divisor = 1; + clk->name = "usysclk"; + break; + } + + return 0; +} + +static int s3c2412_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + dbg("%s: port=%p (%08lx), cfg=%p\n", + __func__, port, port->mapbase, cfg); + + /* ensure we don't change the clock settings... */ + + ucon &= S3C2412_UCON_CLKMASK; + + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c2412_uart_inf = { + .name = "Samsung S3C2412 UART", + .type = PORT_S3C2412, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .get_clksrc = s3c2412_serial_getsource, + .set_clksrc = s3c2412_serial_setsource, + .reset_port = s3c2412_serial_resetport, +}; + +/* device management */ + +static int s3c2412_serial_probe(struct platform_device *dev) +{ + dbg("s3c2440_serial_probe: dev=%p\n", dev); + return s3c24xx_serial_probe(dev, &s3c2412_uart_inf); +} + +static struct platform_driver s3c2412_serial_driver = { + .probe = s3c2412_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s3c2412-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c2412_serial_driver, &s3c2412_uart_inf); + +static inline int s3c2412_serial_init(void) +{ + return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf); +} + +static inline void s3c2412_serial_exit(void) +{ + platform_driver_unregister(&s3c2412_serial_driver); +} + +module_init(s3c2412_serial_init); +module_exit(s3c2412_serial_exit); + +MODULE_DESCRIPTION("Samsung S3C2412,S3C2413 SoC Serial port driver"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:s3c2412-uart"); diff --git a/drivers/tty/serial/s3c2440.c b/drivers/tty/serial/s3c2440.c new file mode 100644 index 000000000000..094cc3904b13 --- /dev/null +++ b/drivers/tty/serial/s3c2440.c @@ -0,0 +1,181 @@ +/* linux/drivers/serial/s3c2440.c + * + * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs. + * + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include "samsung.h" + + +static int s3c2440_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + /* todo - proper fclk<>nonfclk switch. */ + + ucon &= ~S3C2440_UCON_CLKMASK; + + if (strcmp(clk->name, "uclk") == 0) + ucon |= S3C2440_UCON_UCLK; + else if (strcmp(clk->name, "pclk") == 0) + ucon |= S3C2440_UCON_PCLK; + else if (strcmp(clk->name, "fclk") == 0) + ucon |= S3C2440_UCON_FCLK; + else { + printk(KERN_ERR "unknown clock source %s\n", clk->name); + return -EINVAL; + } + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + + +static int s3c2440_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + unsigned long ucon0, ucon1, ucon2; + + switch (ucon & S3C2440_UCON_CLKMASK) { + case S3C2440_UCON_UCLK: + clk->divisor = 1; + clk->name = "uclk"; + break; + + case S3C2440_UCON_PCLK: + case S3C2440_UCON_PCLK2: + clk->divisor = 1; + clk->name = "pclk"; + break; + + case S3C2440_UCON_FCLK: + /* the fun of calculating the uart divisors on + * the s3c2440 */ + + ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); + ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); + ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); + + printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2); + + ucon0 &= S3C2440_UCON0_DIVMASK; + ucon1 &= S3C2440_UCON1_DIVMASK; + ucon2 &= S3C2440_UCON2_DIVMASK; + + if (ucon0 != 0) { + clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT; + clk->divisor += 6; + } else if (ucon1 != 0) { + clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT; + clk->divisor += 21; + } else if (ucon2 != 0) { + clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT; + clk->divisor += 36; + } else { + /* manual calims 44, seems to be 9 */ + clk->divisor = 9; + } + + clk->name = "fclk"; + break; + } + + return 0; +} + +static int s3c2440_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + /* ensure we don't change the clock settings... */ + + ucon &= (S3C2440_UCON0_DIVMASK | (3<<10)); + + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c2440_uart_inf = { + .name = "Samsung S3C2440 UART", + .type = PORT_S3C2440, + .fifosize = 64, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .get_clksrc = s3c2440_serial_getsource, + .set_clksrc = s3c2440_serial_setsource, + .reset_port = s3c2440_serial_resetport, +}; + +/* device management */ + +static int s3c2440_serial_probe(struct platform_device *dev) +{ + dbg("s3c2440_serial_probe: dev=%p\n", dev); + return s3c24xx_serial_probe(dev, &s3c2440_uart_inf); +} + +static struct platform_driver s3c2440_serial_driver = { + .probe = s3c2440_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s3c2440-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c2440_serial_driver, &s3c2440_uart_inf); + +static int __init s3c2440_serial_init(void) +{ + return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf); +} + +static void __exit s3c2440_serial_exit(void) +{ + platform_driver_unregister(&s3c2440_serial_driver); +} + +module_init(s3c2440_serial_init); +module_exit(s3c2440_serial_exit); + +MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:s3c2440-uart"); diff --git a/drivers/tty/serial/s3c24a0.c b/drivers/tty/serial/s3c24a0.c new file mode 100644 index 000000000000..fad6083ca427 --- /dev/null +++ b/drivers/tty/serial/s3c24a0.c @@ -0,0 +1,118 @@ +/* linux/drivers/serial/s3c24a0.c + * + * Driver for Samsung S3C24A0 SoC onboard UARTs. + * + * Based on drivers/serial/s3c2410.c + * + * Author: Sandeep Patil + * + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include "samsung.h" + +static int s3c24a0_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if (strcmp(clk->name, "uclk") == 0) + ucon |= S3C2410_UCON_UCLK; + else + ucon &= ~S3C2410_UCON_UCLK; + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + +static int s3c24a0_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk"; + + return 0; +} + +static int s3c24a0_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + dbg("s3c24a0_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + wr_regl(port, S3C2410_UCON, cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c24a0_uart_inf = { + .name = "Samsung S3C24A0 UART", + .type = PORT_S3C2410, + .fifosize = 16, + .rx_fifomask = S3C24A0_UFSTAT_RXMASK, + .rx_fifoshift = S3C24A0_UFSTAT_RXSHIFT, + .rx_fifofull = S3C24A0_UFSTAT_RXFULL, + .tx_fifofull = S3C24A0_UFSTAT_TXFULL, + .tx_fifomask = S3C24A0_UFSTAT_TXMASK, + .tx_fifoshift = S3C24A0_UFSTAT_TXSHIFT, + .get_clksrc = s3c24a0_serial_getsource, + .set_clksrc = s3c24a0_serial_setsource, + .reset_port = s3c24a0_serial_resetport, +}; + +static int s3c24a0_serial_probe(struct platform_device *dev) +{ + return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf); +} + +static struct platform_driver s3c24a0_serial_driver = { + .probe = s3c24a0_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s3c24a0-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf); + +static int __init s3c24a0_serial_init(void) +{ + return s3c24xx_serial_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf); +} + +static void __exit s3c24a0_serial_exit(void) +{ + platform_driver_unregister(&s3c24a0_serial_driver); +} + +module_init(s3c24a0_serial_init); +module_exit(s3c24a0_serial_exit); + diff --git a/drivers/tty/serial/s3c6400.c b/drivers/tty/serial/s3c6400.c new file mode 100644 index 000000000000..4be92ab50058 --- /dev/null +++ b/drivers/tty/serial/s3c6400.c @@ -0,0 +1,152 @@ +/* linux/drivers/serial/s3c6400.c + * + * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs. + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include "samsung.h" + +static int s3c6400_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if (strcmp(clk->name, "uclk0") == 0) { + ucon &= ~S3C6400_UCON_CLKMASK; + ucon |= S3C6400_UCON_UCLK0; + } else if (strcmp(clk->name, "uclk1") == 0) + ucon |= S3C6400_UCON_UCLK1; + else if (strcmp(clk->name, "pclk") == 0) { + /* See notes about transitioning from UCLK to PCLK */ + ucon &= ~S3C6400_UCON_UCLK0; + } else { + printk(KERN_ERR "unknown clock source %s\n", clk->name); + return -EINVAL; + } + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + + +static int s3c6400_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + u32 ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + + switch (ucon & S3C6400_UCON_CLKMASK) { + case S3C6400_UCON_UCLK0: + clk->name = "uclk0"; + break; + + case S3C6400_UCON_UCLK1: + clk->name = "uclk1"; + break; + + case S3C6400_UCON_PCLK: + case S3C6400_UCON_PCLK2: + clk->name = "pclk"; + break; + } + + return 0; +} + +static int s3c6400_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + /* ensure we don't change the clock settings... */ + + ucon &= S3C6400_UCON_CLKMASK; + + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c6400_uart_inf = { + .name = "Samsung S3C6400 UART", + .type = PORT_S3C6400, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .get_clksrc = s3c6400_serial_getsource, + .set_clksrc = s3c6400_serial_setsource, + .reset_port = s3c6400_serial_resetport, +}; + +/* device management */ + +static int s3c6400_serial_probe(struct platform_device *dev) +{ + dbg("s3c6400_serial_probe: dev=%p\n", dev); + return s3c24xx_serial_probe(dev, &s3c6400_uart_inf); +} + +static struct platform_driver s3c6400_serial_driver = { + .probe = s3c6400_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s3c6400-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c6400_serial_driver, &s3c6400_uart_inf); + +static int __init s3c6400_serial_init(void) +{ + return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf); +} + +static void __exit s3c6400_serial_exit(void) +{ + platform_driver_unregister(&s3c6400_serial_driver); +} + +module_init(s3c6400_serial_init); +module_exit(s3c6400_serial_exit); + +MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:s3c6400-uart"); diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c new file mode 100644 index 000000000000..6ebccd70a707 --- /dev/null +++ b/drivers/tty/serial/s5pv210.c @@ -0,0 +1,162 @@ +/* linux/drivers/serial/s5pv210.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on drivers/serial/s3c6400.c + * + * Driver for Samsung S5PV210 SoC UARTs. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include "samsung.h" + +static int s5pv210_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + struct s3c2410_uartcfg *cfg = port->dev->platform_data; + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if ((cfg->clocks_size) == 1) + return 0; + + if (strcmp(clk->name, "pclk") == 0) + ucon &= ~S5PV210_UCON_CLKMASK; + else if (strcmp(clk->name, "uclk1") == 0) + ucon |= S5PV210_UCON_CLKMASK; + else { + printk(KERN_ERR "unknown clock source %s\n", clk->name); + return -EINVAL; + } + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + + +static int s5pv210_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + struct s3c2410_uartcfg *cfg = port->dev->platform_data; + u32 ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + + if ((cfg->clocks_size) == 1) + return 0; + + switch (ucon & S5PV210_UCON_CLKMASK) { + case S5PV210_UCON_PCLK: + clk->name = "pclk"; + break; + case S5PV210_UCON_UCLK: + clk->name = "uclk1"; + break; + } + + return 0; +} + +static int s5pv210_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + ucon &= S5PV210_UCON_CLKMASK; + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +#define S5PV210_UART_DEFAULT_INFO(fifo_size) \ + .name = "Samsung S5PV210 UART0", \ + .type = PORT_S3C6400, \ + .fifosize = fifo_size, \ + .has_divslot = 1, \ + .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ + .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ + .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ + .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ + .get_clksrc = s5pv210_serial_getsource, \ + .set_clksrc = s5pv210_serial_setsource, \ + .reset_port = s5pv210_serial_resetport + +static struct s3c24xx_uart_info s5p_port_fifo256 = { + S5PV210_UART_DEFAULT_INFO(256), +}; + +static struct s3c24xx_uart_info s5p_port_fifo64 = { + S5PV210_UART_DEFAULT_INFO(64), +}; + +static struct s3c24xx_uart_info s5p_port_fifo16 = { + S5PV210_UART_DEFAULT_INFO(16), +}; + +static struct s3c24xx_uart_info *s5p_uart_inf[] = { + [0] = &s5p_port_fifo256, + [1] = &s5p_port_fifo64, + [2] = &s5p_port_fifo16, + [3] = &s5p_port_fifo16, +}; + +/* device management */ +static int s5p_serial_probe(struct platform_device *pdev) +{ + return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]); +} + +static struct platform_driver s5p_serial_driver = { + .probe = s5p_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .driver = { + .name = "s5pv210-uart", + .owner = THIS_MODULE, + }, +}; + +static int __init s5pv210_serial_console_init(void) +{ + return s3c24xx_serial_initconsole(&s5p_serial_driver, s5p_uart_inf); +} + +console_initcall(s5pv210_serial_console_init); + +static int __init s5p_serial_init(void) +{ + return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf); +} + +static void __exit s5p_serial_exit(void) +{ + platform_driver_unregister(&s5p_serial_driver); +} + +module_init(s5p_serial_init); +module_exit(s5p_serial_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:s5pv210-uart"); +MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support"); +MODULE_AUTHOR("Thomas Abraham "); diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c new file mode 100644 index 000000000000..2199d819a987 --- /dev/null +++ b/drivers/tty/serial/sa1100.c @@ -0,0 +1,918 @@ +/* + * linux/drivers/char/sa1100.c + * + * Driver for SA11x0 serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if defined(CONFIG_SERIAL_SA1100_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* We've been assigned a range on the "Low-density serial ports" major */ +#define SERIAL_SA1100_MAJOR 204 +#define MINOR_START 5 + +#define NR_PORTS 3 + +#define SA1100_ISR_PASS_LIMIT 256 + +/* + * Convert from ignore_status_mask or read_status_mask to UTSR[01] + */ +#define SM_TO_UTSR0(x) ((x) & 0xff) +#define SM_TO_UTSR1(x) ((x) >> 8) +#define UTSR0_TO_SM(x) ((x)) +#define UTSR1_TO_SM(x) ((x) << 8) + +#define UART_GET_UTCR0(sport) __raw_readl((sport)->port.membase + UTCR0) +#define UART_GET_UTCR1(sport) __raw_readl((sport)->port.membase + UTCR1) +#define UART_GET_UTCR2(sport) __raw_readl((sport)->port.membase + UTCR2) +#define UART_GET_UTCR3(sport) __raw_readl((sport)->port.membase + UTCR3) +#define UART_GET_UTSR0(sport) __raw_readl((sport)->port.membase + UTSR0) +#define UART_GET_UTSR1(sport) __raw_readl((sport)->port.membase + UTSR1) +#define UART_GET_CHAR(sport) __raw_readl((sport)->port.membase + UTDR) + +#define UART_PUT_UTCR0(sport,v) __raw_writel((v),(sport)->port.membase + UTCR0) +#define UART_PUT_UTCR1(sport,v) __raw_writel((v),(sport)->port.membase + UTCR1) +#define UART_PUT_UTCR2(sport,v) __raw_writel((v),(sport)->port.membase + UTCR2) +#define UART_PUT_UTCR3(sport,v) __raw_writel((v),(sport)->port.membase + UTCR3) +#define UART_PUT_UTSR0(sport,v) __raw_writel((v),(sport)->port.membase + UTSR0) +#define UART_PUT_UTSR1(sport,v) __raw_writel((v),(sport)->port.membase + UTSR1) +#define UART_PUT_CHAR(sport,v) __raw_writel((v),(sport)->port.membase + UTDR) + +/* + * This is the size of our serial port register set. + */ +#define UART_PORT_SIZE 0x24 + +/* + * This determines how often we check the modem status signals + * for any change. They generally aren't connected to an IRQ + * so we have to poll them. We also check immediately before + * filling the TX fifo incase CTS has been dropped. + */ +#define MCTRL_TIMEOUT (250*HZ/1000) + +struct sa1100_port { + struct uart_port port; + struct timer_list timer; + unsigned int old_status; +}; + +/* + * Handle any change of modem status signal since we were last called. + */ +static void sa1100_mctrl_check(struct sa1100_port *sport) +{ + unsigned int status, changed; + + status = sport->port.ops->get_mctrl(&sport->port); + changed = status ^ sport->old_status; + + if (changed == 0) + return; + + sport->old_status = status; + + if (changed & TIOCM_RI) + sport->port.icount.rng++; + if (changed & TIOCM_DSR) + sport->port.icount.dsr++; + if (changed & TIOCM_CAR) + uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); + if (changed & TIOCM_CTS) + uart_handle_cts_change(&sport->port, status & TIOCM_CTS); + + wake_up_interruptible(&sport->port.state->port.delta_msr_wait); +} + +/* + * This is our per-port timeout handler, for checking the + * modem status signals. + */ +static void sa1100_timeout(unsigned long data) +{ + struct sa1100_port *sport = (struct sa1100_port *)data; + unsigned long flags; + + if (sport->port.state) { + spin_lock_irqsave(&sport->port.lock, flags); + sa1100_mctrl_check(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); + + mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); + } +} + +/* + * interrupts disabled on entry + */ +static void sa1100_stop_tx(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + u32 utcr3; + + utcr3 = UART_GET_UTCR3(sport); + UART_PUT_UTCR3(sport, utcr3 & ~UTCR3_TIE); + sport->port.read_status_mask &= ~UTSR0_TO_SM(UTSR0_TFS); +} + +/* + * port locked and interrupts disabled + */ +static void sa1100_start_tx(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + u32 utcr3; + + utcr3 = UART_GET_UTCR3(sport); + sport->port.read_status_mask |= UTSR0_TO_SM(UTSR0_TFS); + UART_PUT_UTCR3(sport, utcr3 | UTCR3_TIE); +} + +/* + * Interrupts enabled + */ +static void sa1100_stop_rx(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + u32 utcr3; + + utcr3 = UART_GET_UTCR3(sport); + UART_PUT_UTCR3(sport, utcr3 & ~UTCR3_RIE); +} + +/* + * Set the modem control timer to fire immediately. + */ +static void sa1100_enable_ms(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + mod_timer(&sport->timer, jiffies); +} + +static void +sa1100_rx_chars(struct sa1100_port *sport) +{ + struct tty_struct *tty = sport->port.state->port.tty; + unsigned int status, ch, flg; + + status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) | + UTSR0_TO_SM(UART_GET_UTSR0(sport)); + while (status & UTSR1_TO_SM(UTSR1_RNE)) { + ch = UART_GET_CHAR(sport); + + sport->port.icount.rx++; + + flg = TTY_NORMAL; + + /* + * note that the error handling code is + * out of the main execution path + */ + if (status & UTSR1_TO_SM(UTSR1_PRE | UTSR1_FRE | UTSR1_ROR)) { + if (status & UTSR1_TO_SM(UTSR1_PRE)) + sport->port.icount.parity++; + else if (status & UTSR1_TO_SM(UTSR1_FRE)) + sport->port.icount.frame++; + if (status & UTSR1_TO_SM(UTSR1_ROR)) + sport->port.icount.overrun++; + + status &= sport->port.read_status_mask; + + if (status & UTSR1_TO_SM(UTSR1_PRE)) + flg = TTY_PARITY; + else if (status & UTSR1_TO_SM(UTSR1_FRE)) + flg = TTY_FRAME; + +#ifdef SUPPORT_SYSRQ + sport->port.sysrq = 0; +#endif + } + + if (uart_handle_sysrq_char(&sport->port, ch)) + goto ignore_char; + + uart_insert_char(&sport->port, status, UTSR1_TO_SM(UTSR1_ROR), ch, flg); + + ignore_char: + status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) | + UTSR0_TO_SM(UART_GET_UTSR0(sport)); + } + tty_flip_buffer_push(tty); +} + +static void sa1100_tx_chars(struct sa1100_port *sport) +{ + struct circ_buf *xmit = &sport->port.state->xmit; + + if (sport->port.x_char) { + UART_PUT_CHAR(sport, sport->port.x_char); + sport->port.icount.tx++; + sport->port.x_char = 0; + return; + } + + /* + * Check the modem control lines before + * transmitting anything. + */ + sa1100_mctrl_check(sport); + + if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { + sa1100_stop_tx(&sport->port); + return; + } + + /* + * Tried using FIFO (not checking TNF) for fifo fill: + * still had the '4 bytes repeated' problem. + */ + while (UART_GET_UTSR1(sport) & UTSR1_TNF) { + UART_PUT_CHAR(sport, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + sa1100_stop_tx(&sport->port); +} + +static irqreturn_t sa1100_int(int irq, void *dev_id) +{ + struct sa1100_port *sport = dev_id; + unsigned int status, pass_counter = 0; + + spin_lock(&sport->port.lock); + status = UART_GET_UTSR0(sport); + status &= SM_TO_UTSR0(sport->port.read_status_mask) | ~UTSR0_TFS; + do { + if (status & (UTSR0_RFS | UTSR0_RID)) { + /* Clear the receiver idle bit, if set */ + if (status & UTSR0_RID) + UART_PUT_UTSR0(sport, UTSR0_RID); + sa1100_rx_chars(sport); + } + + /* Clear the relevant break bits */ + if (status & (UTSR0_RBB | UTSR0_REB)) + UART_PUT_UTSR0(sport, status & (UTSR0_RBB | UTSR0_REB)); + + if (status & UTSR0_RBB) + sport->port.icount.brk++; + + if (status & UTSR0_REB) + uart_handle_break(&sport->port); + + if (status & UTSR0_TFS) + sa1100_tx_chars(sport); + if (pass_counter++ > SA1100_ISR_PASS_LIMIT) + break; + status = UART_GET_UTSR0(sport); + status &= SM_TO_UTSR0(sport->port.read_status_mask) | + ~UTSR0_TFS; + } while (status & (UTSR0_TFS | UTSR0_RFS | UTSR0_RID)); + spin_unlock(&sport->port.lock); + + return IRQ_HANDLED; +} + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int sa1100_tx_empty(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + return UART_GET_UTSR1(sport) & UTSR1_TBY ? 0 : TIOCSER_TEMT; +} + +static unsigned int sa1100_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void sa1100_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +/* + * Interrupts always disabled. + */ +static void sa1100_break_ctl(struct uart_port *port, int break_state) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + unsigned long flags; + unsigned int utcr3; + + spin_lock_irqsave(&sport->port.lock, flags); + utcr3 = UART_GET_UTCR3(sport); + if (break_state == -1) + utcr3 |= UTCR3_BRK; + else + utcr3 &= ~UTCR3_BRK; + UART_PUT_UTCR3(sport, utcr3); + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static int sa1100_startup(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + int retval; + + /* + * Allocate the IRQ + */ + retval = request_irq(sport->port.irq, sa1100_int, 0, + "sa11x0-uart", sport); + if (retval) + return retval; + + /* + * Finally, clear and enable interrupts + */ + UART_PUT_UTSR0(sport, -1); + UART_PUT_UTCR3(sport, UTCR3_RXE | UTCR3_TXE | UTCR3_RIE); + + /* + * Enable modem status interrupts + */ + spin_lock_irq(&sport->port.lock); + sa1100_enable_ms(&sport->port); + spin_unlock_irq(&sport->port.lock); + + return 0; +} + +static void sa1100_shutdown(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + /* + * Stop our timer. + */ + del_timer_sync(&sport->timer); + + /* + * Free the interrupt + */ + free_irq(sport->port.irq, sport); + + /* + * Disable all interrupts, port and break condition. + */ + UART_PUT_UTCR3(sport, 0); +} + +static void +sa1100_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + unsigned long flags; + unsigned int utcr0, old_utcr3, baud, quot; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + + /* + * We only support CS7 and CS8. + */ + while ((termios->c_cflag & CSIZE) != CS7 && + (termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8) + utcr0 = UTCR0_DSS; + else + utcr0 = 0; + + if (termios->c_cflag & CSTOPB) + utcr0 |= UTCR0_SBS; + if (termios->c_cflag & PARENB) { + utcr0 |= UTCR0_PE; + if (!(termios->c_cflag & PARODD)) + utcr0 |= UTCR0_OES; + } + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask &= UTSR0_TO_SM(UTSR0_TFS); + sport->port.read_status_mask |= UTSR1_TO_SM(UTSR1_ROR); + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= + UTSR1_TO_SM(UTSR1_FRE | UTSR1_PRE); + if (termios->c_iflag & (BRKINT | PARMRK)) + sport->port.read_status_mask |= + UTSR0_TO_SM(UTSR0_RBB | UTSR0_REB); + + /* + * Characters to ignore + */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= + UTSR1_TO_SM(UTSR1_FRE | UTSR1_PRE); + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= + UTSR0_TO_SM(UTSR0_RBB | UTSR0_REB); + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= + UTSR1_TO_SM(UTSR1_ROR); + } + + del_timer_sync(&sport->timer); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * disable interrupts and drain transmitter + */ + old_utcr3 = UART_GET_UTCR3(sport); + UART_PUT_UTCR3(sport, old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)); + + while (UART_GET_UTSR1(sport) & UTSR1_TBY) + barrier(); + + /* then, disable everything */ + UART_PUT_UTCR3(sport, 0); + + /* set the parity, stop bits and data size */ + UART_PUT_UTCR0(sport, utcr0); + + /* set the baud rate */ + quot -= 1; + UART_PUT_UTCR1(sport, ((quot & 0xf00) >> 8)); + UART_PUT_UTCR2(sport, (quot & 0xff)); + + UART_PUT_UTSR0(sport, -1); + + UART_PUT_UTCR3(sport, old_utcr3); + + if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) + sa1100_enable_ms(&sport->port); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static const char *sa1100_type(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + return sport->port.type == PORT_SA1100 ? "SA1100" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void sa1100_release_port(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + release_mem_region(sport->port.mapbase, UART_PORT_SIZE); +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int sa1100_request_port(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + return request_mem_region(sport->port.mapbase, UART_PORT_SIZE, + "sa11x0-uart") != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void sa1100_config_port(struct uart_port *port, int flags) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + if (flags & UART_CONFIG_TYPE && + sa1100_request_port(&sport->port) == 0) + sport->port.type = PORT_SA1100; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + * The only change we allow are to the flags and type, and + * even then only between PORT_SA1100 and PORT_UNKNOWN + */ +static int +sa1100_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_SA1100) + ret = -EINVAL; + if (sport->port.irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != SERIAL_IO_MEM) + ret = -EINVAL; + if (sport->port.uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if ((void *)sport->port.mapbase != ser->iomem_base) + ret = -EINVAL; + if (sport->port.iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +static struct uart_ops sa1100_pops = { + .tx_empty = sa1100_tx_empty, + .set_mctrl = sa1100_set_mctrl, + .get_mctrl = sa1100_get_mctrl, + .stop_tx = sa1100_stop_tx, + .start_tx = sa1100_start_tx, + .stop_rx = sa1100_stop_rx, + .enable_ms = sa1100_enable_ms, + .break_ctl = sa1100_break_ctl, + .startup = sa1100_startup, + .shutdown = sa1100_shutdown, + .set_termios = sa1100_set_termios, + .type = sa1100_type, + .release_port = sa1100_release_port, + .request_port = sa1100_request_port, + .config_port = sa1100_config_port, + .verify_port = sa1100_verify_port, +}; + +static struct sa1100_port sa1100_ports[NR_PORTS]; + +/* + * Setup the SA1100 serial ports. Note that we don't include the IrDA + * port here since we have our own SIR/FIR driver (see drivers/net/irda) + * + * Note also that we support "console=ttySAx" where "x" is either 0 or 1. + * Which serial port this ends up being depends on the machine you're + * running this kernel on. I'm not convinced that this is a good idea, + * but that's the way it traditionally works. + * + * Note that NanoEngine UART3 becomes UART2, and UART2 is no longer + * used here. + */ +static void __init sa1100_init_ports(void) +{ + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0; i < NR_PORTS; i++) { + sa1100_ports[i].port.uartclk = 3686400; + sa1100_ports[i].port.ops = &sa1100_pops; + sa1100_ports[i].port.fifosize = 8; + sa1100_ports[i].port.line = i; + sa1100_ports[i].port.iotype = UPIO_MEM; + init_timer(&sa1100_ports[i].timer); + sa1100_ports[i].timer.function = sa1100_timeout; + sa1100_ports[i].timer.data = (unsigned long)&sa1100_ports[i]; + } + + /* + * make transmit lines outputs, so that when the port + * is closed, the output is in the MARK state. + */ + PPDR |= PPC_TXD1 | PPC_TXD3; + PPSR |= PPC_TXD1 | PPC_TXD3; +} + +void __devinit sa1100_register_uart_fns(struct sa1100_port_fns *fns) +{ + if (fns->get_mctrl) + sa1100_pops.get_mctrl = fns->get_mctrl; + if (fns->set_mctrl) + sa1100_pops.set_mctrl = fns->set_mctrl; + + sa1100_pops.pm = fns->pm; + sa1100_pops.set_wake = fns->set_wake; +} + +void __init sa1100_register_uart(int idx, int port) +{ + if (idx >= NR_PORTS) { + printk(KERN_ERR "%s: bad index number %d\n", __func__, idx); + return; + } + + switch (port) { + case 1: + sa1100_ports[idx].port.membase = (void __iomem *)&Ser1UTCR0; + sa1100_ports[idx].port.mapbase = _Ser1UTCR0; + sa1100_ports[idx].port.irq = IRQ_Ser1UART; + sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; + break; + + case 2: + sa1100_ports[idx].port.membase = (void __iomem *)&Ser2UTCR0; + sa1100_ports[idx].port.mapbase = _Ser2UTCR0; + sa1100_ports[idx].port.irq = IRQ_Ser2ICP; + sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; + break; + + case 3: + sa1100_ports[idx].port.membase = (void __iomem *)&Ser3UTCR0; + sa1100_ports[idx].port.mapbase = _Ser3UTCR0; + sa1100_ports[idx].port.irq = IRQ_Ser3UART; + sa1100_ports[idx].port.flags = UPF_BOOT_AUTOCONF; + break; + + default: + printk(KERN_ERR "%s: bad port number %d\n", __func__, port); + } +} + + +#ifdef CONFIG_SERIAL_SA1100_CONSOLE +static void sa1100_console_putchar(struct uart_port *port, int ch) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + while (!(UART_GET_UTSR1(sport) & UTSR1_TNF)) + barrier(); + UART_PUT_CHAR(sport, ch); +} + +/* + * Interrupts are disabled on entering + */ +static void +sa1100_console_write(struct console *co, const char *s, unsigned int count) +{ + struct sa1100_port *sport = &sa1100_ports[co->index]; + unsigned int old_utcr3, status; + + /* + * First, save UTCR3 and then disable interrupts + */ + old_utcr3 = UART_GET_UTCR3(sport); + UART_PUT_UTCR3(sport, (old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)) | + UTCR3_TXE); + + uart_console_write(&sport->port, s, count, sa1100_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore UTCR3 + */ + do { + status = UART_GET_UTSR1(sport); + } while (status & UTSR1_TBY); + UART_PUT_UTCR3(sport, old_utcr3); +} + +/* + * If the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init +sa1100_console_get_options(struct sa1100_port *sport, int *baud, + int *parity, int *bits) +{ + unsigned int utcr3; + + utcr3 = UART_GET_UTCR3(sport) & (UTCR3_RXE | UTCR3_TXE); + if (utcr3 == (UTCR3_RXE | UTCR3_TXE)) { + /* ok, the port was enabled */ + unsigned int utcr0, quot; + + utcr0 = UART_GET_UTCR0(sport); + + *parity = 'n'; + if (utcr0 & UTCR0_PE) { + if (utcr0 & UTCR0_OES) + *parity = 'e'; + else + *parity = 'o'; + } + + if (utcr0 & UTCR0_DSS) + *bits = 8; + else + *bits = 7; + + quot = UART_GET_UTCR2(sport) | UART_GET_UTCR1(sport) << 8; + quot &= 0xfff; + *baud = sport->port.uartclk / (16 * (quot + 1)); + } +} + +static int __init +sa1100_console_setup(struct console *co, char *options) +{ + struct sa1100_port *sport; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= NR_PORTS) + co->index = 0; + sport = &sa1100_ports[co->index]; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + sa1100_console_get_options(sport, &baud, &parity, &bits); + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +static struct uart_driver sa1100_reg; +static struct console sa1100_console = { + .name = "ttySA", + .write = sa1100_console_write, + .device = uart_console_device, + .setup = sa1100_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sa1100_reg, +}; + +static int __init sa1100_rs_console_init(void) +{ + sa1100_init_ports(); + register_console(&sa1100_console); + return 0; +} +console_initcall(sa1100_rs_console_init); + +#define SA1100_CONSOLE &sa1100_console +#else +#define SA1100_CONSOLE NULL +#endif + +static struct uart_driver sa1100_reg = { + .owner = THIS_MODULE, + .driver_name = "ttySA", + .dev_name = "ttySA", + .major = SERIAL_SA1100_MAJOR, + .minor = MINOR_START, + .nr = NR_PORTS, + .cons = SA1100_CONSOLE, +}; + +static int sa1100_serial_suspend(struct platform_device *dev, pm_message_t state) +{ + struct sa1100_port *sport = platform_get_drvdata(dev); + + if (sport) + uart_suspend_port(&sa1100_reg, &sport->port); + + return 0; +} + +static int sa1100_serial_resume(struct platform_device *dev) +{ + struct sa1100_port *sport = platform_get_drvdata(dev); + + if (sport) + uart_resume_port(&sa1100_reg, &sport->port); + + return 0; +} + +static int sa1100_serial_probe(struct platform_device *dev) +{ + struct resource *res = dev->resource; + int i; + + for (i = 0; i < dev->num_resources; i++, res++) + if (res->flags & IORESOURCE_MEM) + break; + + if (i < dev->num_resources) { + for (i = 0; i < NR_PORTS; i++) { + if (sa1100_ports[i].port.mapbase != res->start) + continue; + + sa1100_ports[i].port.dev = &dev->dev; + uart_add_one_port(&sa1100_reg, &sa1100_ports[i].port); + platform_set_drvdata(dev, &sa1100_ports[i]); + break; + } + } + + return 0; +} + +static int sa1100_serial_remove(struct platform_device *pdev) +{ + struct sa1100_port *sport = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + if (sport) + uart_remove_one_port(&sa1100_reg, &sport->port); + + return 0; +} + +static struct platform_driver sa11x0_serial_driver = { + .probe = sa1100_serial_probe, + .remove = sa1100_serial_remove, + .suspend = sa1100_serial_suspend, + .resume = sa1100_serial_resume, + .driver = { + .name = "sa11x0-uart", + .owner = THIS_MODULE, + }, +}; + +static int __init sa1100_serial_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: SA11x0 driver\n"); + + sa1100_init_ports(); + + ret = uart_register_driver(&sa1100_reg); + if (ret == 0) { + ret = platform_driver_register(&sa11x0_serial_driver); + if (ret) + uart_unregister_driver(&sa1100_reg); + } + return ret; +} + +static void __exit sa1100_serial_exit(void) +{ + platform_driver_unregister(&sa11x0_serial_driver); + uart_unregister_driver(&sa1100_reg); +} + +module_init(sa1100_serial_init); +module_exit(sa1100_serial_exit); + +MODULE_AUTHOR("Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("SA1100 generic serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_SA1100_MAJOR); +MODULE_ALIAS("platform:sa11x0-uart"); diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c new file mode 100644 index 000000000000..7ac2bf5167cd --- /dev/null +++ b/drivers/tty/serial/samsung.c @@ -0,0 +1,1487 @@ +/* linux/drivers/serial/samsuing.c + * + * Driver core for Samsung SoC onboard UARTs. + * + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Hote on 2410 error handling + * + * The s3c2410 manual has a love/hate affair with the contents of the + * UERSTAT register in the UART blocks, and keeps marking some of the + * error bits as reserved. Having checked with the s3c2410x01, + * it copes with BREAKs properly, so I am happy to ignore the RESERVED + * feature from the latter versions of the manual. + * + * If it becomes aparrent that latter versions of the 2410 remove these + * bits, then action will have to be taken to differentiate the versions + * and change the policy on BREAK + * + * BJD, 04-Nov-2004 +*/ + +#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include + +#include "samsung.h" + +/* UART name and device definitions */ + +#define S3C24XX_SERIAL_NAME "ttySAC" +#define S3C24XX_SERIAL_MAJOR 204 +#define S3C24XX_SERIAL_MINOR 64 + +/* macros to change one thing to another */ + +#define tx_enabled(port) ((port)->unused[0]) +#define rx_enabled(port) ((port)->unused[1]) + +/* flag to ignore all characters comming in */ +#define RXSTAT_DUMMY_READ (0x10000000) + +static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port) +{ + return container_of(port, struct s3c24xx_uart_port, port); +} + +/* translate a port to the device name */ + +static inline const char *s3c24xx_serial_portname(struct uart_port *port) +{ + return to_platform_device(port->dev)->name; +} + +static int s3c24xx_serial_txempty_nofifo(struct uart_port *port) +{ + return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE); +} + +static void s3c24xx_serial_rx_enable(struct uart_port *port) +{ + unsigned long flags; + unsigned int ucon, ufcon; + int count = 10000; + + spin_lock_irqsave(&port->lock, flags); + + while (--count && !s3c24xx_serial_txempty_nofifo(port)) + udelay(100); + + ufcon = rd_regl(port, S3C2410_UFCON); + ufcon |= S3C2410_UFCON_RESETRX; + wr_regl(port, S3C2410_UFCON, ufcon); + + ucon = rd_regl(port, S3C2410_UCON); + ucon |= S3C2410_UCON_RXIRQMODE; + wr_regl(port, S3C2410_UCON, ucon); + + rx_enabled(port) = 1; + spin_unlock_irqrestore(&port->lock, flags); +} + +static void s3c24xx_serial_rx_disable(struct uart_port *port) +{ + unsigned long flags; + unsigned int ucon; + + spin_lock_irqsave(&port->lock, flags); + + ucon = rd_regl(port, S3C2410_UCON); + ucon &= ~S3C2410_UCON_RXIRQMODE; + wr_regl(port, S3C2410_UCON, ucon); + + rx_enabled(port) = 0; + spin_unlock_irqrestore(&port->lock, flags); +} + +static void s3c24xx_serial_stop_tx(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + + if (tx_enabled(port)) { + disable_irq_nosync(ourport->tx_irq); + tx_enabled(port) = 0; + if (port->flags & UPF_CONS_FLOW) + s3c24xx_serial_rx_enable(port); + } +} + +static void s3c24xx_serial_start_tx(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + + if (!tx_enabled(port)) { + if (port->flags & UPF_CONS_FLOW) + s3c24xx_serial_rx_disable(port); + + enable_irq(ourport->tx_irq); + tx_enabled(port) = 1; + } +} + + +static void s3c24xx_serial_stop_rx(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + + if (rx_enabled(port)) { + dbg("s3c24xx_serial_stop_rx: port=%p\n", port); + disable_irq_nosync(ourport->rx_irq); + rx_enabled(port) = 0; + } +} + +static void s3c24xx_serial_enable_ms(struct uart_port *port) +{ +} + +static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port) +{ + return to_ourport(port)->info; +} + +static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port) +{ + if (port->dev == NULL) + return NULL; + + return (struct s3c2410_uartcfg *)port->dev->platform_data; +} + +static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, + unsigned long ufstat) +{ + struct s3c24xx_uart_info *info = ourport->info; + + if (ufstat & info->rx_fifofull) + return info->fifosize; + + return (ufstat & info->rx_fifomask) >> info->rx_fifoshift; +} + + +/* ? - where has parity gone?? */ +#define S3C2410_UERSTAT_PARITY (0x1000) + +static irqreturn_t +s3c24xx_serial_rx_chars(int irq, void *dev_id) +{ + struct s3c24xx_uart_port *ourport = dev_id; + struct uart_port *port = &ourport->port; + struct tty_struct *tty = port->state->port.tty; + unsigned int ufcon, ch, flag, ufstat, uerstat; + int max_count = 64; + + while (max_count-- > 0) { + ufcon = rd_regl(port, S3C2410_UFCON); + ufstat = rd_regl(port, S3C2410_UFSTAT); + + if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0) + break; + + uerstat = rd_regl(port, S3C2410_UERSTAT); + ch = rd_regb(port, S3C2410_URXH); + + if (port->flags & UPF_CONS_FLOW) { + int txe = s3c24xx_serial_txempty_nofifo(port); + + if (rx_enabled(port)) { + if (!txe) { + rx_enabled(port) = 0; + continue; + } + } else { + if (txe) { + ufcon |= S3C2410_UFCON_RESETRX; + wr_regl(port, S3C2410_UFCON, ufcon); + rx_enabled(port) = 1; + goto out; + } + continue; + } + } + + /* insert the character into the buffer */ + + flag = TTY_NORMAL; + port->icount.rx++; + + if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) { + dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n", + ch, uerstat); + + /* check for break */ + if (uerstat & S3C2410_UERSTAT_BREAK) { + dbg("break!\n"); + port->icount.brk++; + if (uart_handle_break(port)) + goto ignore_char; + } + + if (uerstat & S3C2410_UERSTAT_FRAME) + port->icount.frame++; + if (uerstat & S3C2410_UERSTAT_OVERRUN) + port->icount.overrun++; + + uerstat &= port->read_status_mask; + + if (uerstat & S3C2410_UERSTAT_BREAK) + flag = TTY_BREAK; + else if (uerstat & S3C2410_UERSTAT_PARITY) + flag = TTY_PARITY; + else if (uerstat & (S3C2410_UERSTAT_FRAME | + S3C2410_UERSTAT_OVERRUN)) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + goto ignore_char; + + uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, + ch, flag); + + ignore_char: + continue; + } + tty_flip_buffer_push(tty); + + out: + return IRQ_HANDLED; +} + +static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) +{ + struct s3c24xx_uart_port *ourport = id; + struct uart_port *port = &ourport->port; + struct circ_buf *xmit = &port->state->xmit; + int count = 256; + + if (port->x_char) { + wr_regb(port, S3C2410_UTXH, port->x_char); + port->icount.tx++; + port->x_char = 0; + goto out; + } + + /* if there isnt anything more to transmit, or the uart is now + * stopped, disable the uart and exit + */ + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + s3c24xx_serial_stop_tx(port); + goto out; + } + + /* try and drain the buffer... */ + + while (!uart_circ_empty(xmit) && count-- > 0) { + if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull) + break; + + wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + s3c24xx_serial_stop_tx(port); + + out: + return IRQ_HANDLED; +} + +static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT); + unsigned long ufcon = rd_regl(port, S3C2410_UFCON); + + if (ufcon & S3C2410_UFCON_FIFOMODE) { + if ((ufstat & info->tx_fifomask) != 0 || + (ufstat & info->tx_fifofull)) + return 0; + + return 1; + } + + return s3c24xx_serial_txempty_nofifo(port); +} + +/* no modem control lines */ +static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port) +{ + unsigned int umstat = rd_regb(port, S3C2410_UMSTAT); + + if (umstat & S3C2410_UMSTAT_CTS) + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; + else + return TIOCM_CAR | TIOCM_DSR; +} + +static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* todo - possibly remove AFC and do manual CTS */ +} + +static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + unsigned int ucon; + + spin_lock_irqsave(&port->lock, flags); + + ucon = rd_regl(port, S3C2410_UCON); + + if (break_state) + ucon |= S3C2410_UCON_SBREAK; + else + ucon &= ~S3C2410_UCON_SBREAK; + + wr_regl(port, S3C2410_UCON, ucon); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void s3c24xx_serial_shutdown(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + + if (ourport->tx_claimed) { + free_irq(ourport->tx_irq, ourport); + tx_enabled(port) = 0; + ourport->tx_claimed = 0; + } + + if (ourport->rx_claimed) { + free_irq(ourport->rx_irq, ourport); + ourport->rx_claimed = 0; + rx_enabled(port) = 0; + } +} + + +static int s3c24xx_serial_startup(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + int ret; + + dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n", + port->mapbase, port->membase); + + rx_enabled(port) = 1; + + ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0, + s3c24xx_serial_portname(port), ourport); + + if (ret != 0) { + printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq); + return ret; + } + + ourport->rx_claimed = 1; + + dbg("requesting tx irq...\n"); + + tx_enabled(port) = 1; + + ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0, + s3c24xx_serial_portname(port), ourport); + + if (ret) { + printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq); + goto err; + } + + ourport->tx_claimed = 1; + + dbg("s3c24xx_serial_startup ok\n"); + + /* the port reset code should have done the correct + * register setup for the port controls */ + + return ret; + + err: + s3c24xx_serial_shutdown(port); + return ret; +} + +/* power power management control */ + +static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, + unsigned int old) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + + ourport->pm_level = level; + + switch (level) { + case 3: + if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL) + clk_disable(ourport->baudclk); + + clk_disable(ourport->clk); + break; + + case 0: + clk_enable(ourport->clk); + + if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL) + clk_enable(ourport->baudclk); + + break; + default: + printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level); + } +} + +/* baud rate calculation + * + * The UARTs on the S3C2410/S3C2440 can take their clocks from a number + * of different sources, including the peripheral clock ("pclk") and an + * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk") + * with a programmable extra divisor. + * + * The following code goes through the clock sources, and calculates the + * baud clocks (and the resultant actual baud rates) and then tries to + * pick the closest one and select that. + * +*/ + + +#define MAX_CLKS (8) + +static struct s3c24xx_uart_clksrc tmp_clksrc = { + .name = "pclk", + .min_baud = 0, + .max_baud = 0, + .divisor = 1, +}; + +static inline int +s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + return (info->get_clksrc)(port, c); +} + +static inline int +s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + return (info->set_clksrc)(port, c); +} + +struct baud_calc { + struct s3c24xx_uart_clksrc *clksrc; + unsigned int calc; + unsigned int divslot; + unsigned int quot; + struct clk *src; +}; + +static int s3c24xx_serial_calcbaud(struct baud_calc *calc, + struct uart_port *port, + struct s3c24xx_uart_clksrc *clksrc, + unsigned int baud) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + unsigned long rate; + + calc->src = clk_get(port->dev, clksrc->name); + if (calc->src == NULL || IS_ERR(calc->src)) + return 0; + + rate = clk_get_rate(calc->src); + rate /= clksrc->divisor; + + calc->clksrc = clksrc; + + if (ourport->info->has_divslot) { + unsigned long div = rate / baud; + + /* The UDIVSLOT register on the newer UARTs allows us to + * get a divisor adjustment of 1/16th on the baud clock. + * + * We don't keep the UDIVSLOT value (the 16ths we calculated + * by not multiplying the baud by 16) as it is easy enough + * to recalculate. + */ + + calc->quot = div / 16; + calc->calc = rate / div; + } else { + calc->quot = (rate + (8 * baud)) / (16 * baud); + calc->calc = (rate / (calc->quot * 16)); + } + + calc->quot--; + return 1; +} + +static unsigned int s3c24xx_serial_getclk(struct uart_port *port, + struct s3c24xx_uart_clksrc **clksrc, + struct clk **clk, + unsigned int baud) +{ + struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); + struct s3c24xx_uart_clksrc *clkp; + struct baud_calc res[MAX_CLKS]; + struct baud_calc *resptr, *best, *sptr; + int i; + + clkp = cfg->clocks; + best = NULL; + + if (cfg->clocks_size < 2) { + if (cfg->clocks_size == 0) + clkp = &tmp_clksrc; + + /* check to see if we're sourcing fclk, and if so we're + * going to have to update the clock source + */ + + if (strcmp(clkp->name, "fclk") == 0) { + struct s3c24xx_uart_clksrc src; + + s3c24xx_serial_getsource(port, &src); + + /* check that the port already using fclk, and if + * not, then re-select fclk + */ + + if (strcmp(src.name, clkp->name) == 0) { + s3c24xx_serial_setsource(port, clkp); + s3c24xx_serial_getsource(port, &src); + } + + clkp->divisor = src.divisor; + } + + s3c24xx_serial_calcbaud(res, port, clkp, baud); + best = res; + resptr = best + 1; + } else { + resptr = res; + + for (i = 0; i < cfg->clocks_size; i++, clkp++) { + if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud)) + resptr++; + } + } + + /* ok, we now need to select the best clock we found */ + + if (!best) { + unsigned int deviation = (1<<30)|((1<<30)-1); + int calc_deviation; + + for (sptr = res; sptr < resptr; sptr++) { + calc_deviation = baud - sptr->calc; + if (calc_deviation < 0) + calc_deviation = -calc_deviation; + + if (calc_deviation < deviation) { + best = sptr; + deviation = calc_deviation; + } + } + } + + /* store results to pass back */ + + *clksrc = best->clksrc; + *clk = best->src; + + return best->quot; +} + +/* udivslot_table[] + * + * This table takes the fractional value of the baud divisor and gives + * the recommended setting for the UDIVSLOT register. + */ +static u16 udivslot_table[16] = { + [0] = 0x0000, + [1] = 0x0080, + [2] = 0x0808, + [3] = 0x0888, + [4] = 0x2222, + [5] = 0x4924, + [6] = 0x4A52, + [7] = 0x54AA, + [8] = 0x5555, + [9] = 0xD555, + [10] = 0xD5D5, + [11] = 0xDDD5, + [12] = 0xDDDD, + [13] = 0xDFDD, + [14] = 0xDFDF, + [15] = 0xFFDF, +}; + +static void s3c24xx_serial_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); + struct s3c24xx_uart_port *ourport = to_ourport(port); + struct s3c24xx_uart_clksrc *clksrc = NULL; + struct clk *clk = NULL; + unsigned long flags; + unsigned int baud, quot; + unsigned int ulcon; + unsigned int umcon; + unsigned int udivslot = 0; + + /* + * We don't support modem control lines. + */ + termios->c_cflag &= ~(HUPCL | CMSPAR); + termios->c_cflag |= CLOCAL; + + /* + * Ask the core to calculate the divisor for us. + */ + + baud = uart_get_baud_rate(port, termios, old, 0, 115200*8); + + if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) + quot = port->custom_divisor; + else + quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud); + + /* check to see if we need to change clock source */ + + if (ourport->clksrc != clksrc || ourport->baudclk != clk) { + dbg("selecting clock %p\n", clk); + s3c24xx_serial_setsource(port, clksrc); + + if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { + clk_disable(ourport->baudclk); + ourport->baudclk = NULL; + } + + clk_enable(clk); + + ourport->clksrc = clksrc; + ourport->baudclk = clk; + ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; + } + + if (ourport->info->has_divslot) { + unsigned int div = ourport->baudclk_rate / baud; + + if (cfg->has_fracval) { + udivslot = (div & 15); + dbg("fracval = %04x\n", udivslot); + } else { + udivslot = udivslot_table[div & 15]; + dbg("udivslot = %04x (div %d)\n", udivslot, div & 15); + } + } + + switch (termios->c_cflag & CSIZE) { + case CS5: + dbg("config: 5bits/char\n"); + ulcon = S3C2410_LCON_CS5; + break; + case CS6: + dbg("config: 6bits/char\n"); + ulcon = S3C2410_LCON_CS6; + break; + case CS7: + dbg("config: 7bits/char\n"); + ulcon = S3C2410_LCON_CS7; + break; + case CS8: + default: + dbg("config: 8bits/char\n"); + ulcon = S3C2410_LCON_CS8; + break; + } + + /* preserve original lcon IR settings */ + ulcon |= (cfg->ulcon & S3C2410_LCON_IRM); + + if (termios->c_cflag & CSTOPB) + ulcon |= S3C2410_LCON_STOPB; + + umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0; + + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & PARODD) + ulcon |= S3C2410_LCON_PODD; + else + ulcon |= S3C2410_LCON_PEVEN; + } else { + ulcon |= S3C2410_LCON_PNONE; + } + + spin_lock_irqsave(&port->lock, flags); + + dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n", + ulcon, quot, udivslot); + + wr_regl(port, S3C2410_ULCON, ulcon); + wr_regl(port, S3C2410_UBRDIV, quot); + wr_regl(port, S3C2410_UMCON, umcon); + + if (ourport->info->has_divslot) + wr_regl(port, S3C2443_DIVSLOT, udivslot); + + dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", + rd_regl(port, S3C2410_ULCON), + rd_regl(port, S3C2410_UCON), + rd_regl(port, S3C2410_UFCON)); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * Which character status flags are we interested in? + */ + port->read_status_mask = S3C2410_UERSTAT_OVERRUN; + if (termios->c_iflag & INPCK) + port->read_status_mask |= S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_PARITY; + + /* + * Which character status flags should we ignore? + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN; + if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) + port->ignore_status_mask |= S3C2410_UERSTAT_FRAME; + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= RXSTAT_DUMMY_READ; + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *s3c24xx_serial_type(struct uart_port *port) +{ + switch (port->type) { + case PORT_S3C2410: + return "S3C2410"; + case PORT_S3C2440: + return "S3C2440"; + case PORT_S3C2412: + return "S3C2412"; + case PORT_S3C6400: + return "S3C6400/10"; + default: + return NULL; + } +} + +#define MAP_SIZE (0x100) + +static void s3c24xx_serial_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, MAP_SIZE); +} + +static int s3c24xx_serial_request_port(struct uart_port *port) +{ + const char *name = s3c24xx_serial_portname(port); + return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY; +} + +static void s3c24xx_serial_config_port(struct uart_port *port, int flags) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + if (flags & UART_CONFIG_TYPE && + s3c24xx_serial_request_port(port) == 0) + port->type = info->type; +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int +s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + if (ser->type != PORT_UNKNOWN && ser->type != info->type) + return -EINVAL; + + return 0; +} + + +#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE + +static struct console s3c24xx_serial_console; + +#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console +#else +#define S3C24XX_SERIAL_CONSOLE NULL +#endif + +static struct uart_ops s3c24xx_serial_ops = { + .pm = s3c24xx_serial_pm, + .tx_empty = s3c24xx_serial_tx_empty, + .get_mctrl = s3c24xx_serial_get_mctrl, + .set_mctrl = s3c24xx_serial_set_mctrl, + .stop_tx = s3c24xx_serial_stop_tx, + .start_tx = s3c24xx_serial_start_tx, + .stop_rx = s3c24xx_serial_stop_rx, + .enable_ms = s3c24xx_serial_enable_ms, + .break_ctl = s3c24xx_serial_break_ctl, + .startup = s3c24xx_serial_startup, + .shutdown = s3c24xx_serial_shutdown, + .set_termios = s3c24xx_serial_set_termios, + .type = s3c24xx_serial_type, + .release_port = s3c24xx_serial_release_port, + .request_port = s3c24xx_serial_request_port, + .config_port = s3c24xx_serial_config_port, + .verify_port = s3c24xx_serial_verify_port, +}; + + +static struct uart_driver s3c24xx_uart_drv = { + .owner = THIS_MODULE, + .dev_name = "s3c2410_serial", + .nr = CONFIG_SERIAL_SAMSUNG_UARTS, + .cons = S3C24XX_SERIAL_CONSOLE, + .driver_name = S3C24XX_SERIAL_NAME, + .major = S3C24XX_SERIAL_MAJOR, + .minor = S3C24XX_SERIAL_MINOR, +}; + +static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = { + [0] = { + .port = { + .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock), + .iotype = UPIO_MEM, + .irq = IRQ_S3CUART_RX0, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + } + }, + [1] = { + .port = { + .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock), + .iotype = UPIO_MEM, + .irq = IRQ_S3CUART_RX1, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 1, + } + }, +#if CONFIG_SERIAL_SAMSUNG_UARTS > 2 + + [2] = { + .port = { + .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock), + .iotype = UPIO_MEM, + .irq = IRQ_S3CUART_RX2, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 2, + } + }, +#endif +#if CONFIG_SERIAL_SAMSUNG_UARTS > 3 + [3] = { + .port = { + .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock), + .iotype = UPIO_MEM, + .irq = IRQ_S3CUART_RX3, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 3, + } + } +#endif +}; + +/* s3c24xx_serial_resetport + * + * wrapper to call the specific reset for this port (reset the fifos + * and the settings) +*/ + +static inline int s3c24xx_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + return (info->reset_port)(port, cfg); +} + + +#ifdef CONFIG_CPU_FREQ + +static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct s3c24xx_uart_port *port; + struct uart_port *uport; + + port = container_of(nb, struct s3c24xx_uart_port, freq_transition); + uport = &port->port; + + /* check to see if port is enabled */ + + if (port->pm_level != 0) + return 0; + + /* try and work out if the baudrate is changing, we can detect + * a change in rate, but we do not have support for detecting + * a disturbance in the clock-rate over the change. + */ + + if (IS_ERR(port->clk)) + goto exit; + + if (port->baudclk_rate == clk_get_rate(port->clk)) + goto exit; + + if (val == CPUFREQ_PRECHANGE) { + /* we should really shut the port down whilst the + * frequency change is in progress. */ + + } else if (val == CPUFREQ_POSTCHANGE) { + struct ktermios *termios; + struct tty_struct *tty; + + if (uport->state == NULL) + goto exit; + + tty = uport->state->port.tty; + + if (tty == NULL) + goto exit; + + termios = tty->termios; + + if (termios == NULL) { + printk(KERN_WARNING "%s: no termios?\n", __func__); + goto exit; + } + + s3c24xx_serial_set_termios(uport, termios, NULL); + } + + exit: + return 0; +} + +static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) +{ + port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition; + + return cpufreq_register_notifier(&port->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) +{ + cpufreq_unregister_notifier(&port->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +#else +static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) +{ + return 0; +} + +static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) +{ +} +#endif + +/* s3c24xx_serial_init_port + * + * initialise a single serial port from the platform device given + */ + +static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, + struct s3c24xx_uart_info *info, + struct platform_device *platdev) +{ + struct uart_port *port = &ourport->port; + struct s3c2410_uartcfg *cfg; + struct resource *res; + int ret; + + dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev); + + if (platdev == NULL) + return -ENODEV; + + cfg = s3c24xx_dev_to_cfg(&platdev->dev); + + if (port->mapbase != 0) + return 0; + + if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) { + printk(KERN_ERR "%s: port %d bigger than %d\n", __func__, + cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS); + return -ERANGE; + } + + /* setup info for port */ + port->dev = &platdev->dev; + ourport->info = info; + + /* copy the info in from provided structure */ + ourport->port.fifosize = info->fifosize; + + dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport); + + port->uartclk = 1; + + if (cfg->uart_flags & UPF_CONS_FLOW) { + dbg("s3c24xx_serial_init_port: enabling flow control\n"); + port->flags |= UPF_CONS_FLOW; + } + + /* sort our the physical and virtual addresses for each UART */ + + res = platform_get_resource(platdev, IORESOURCE_MEM, 0); + if (res == NULL) { + printk(KERN_ERR "failed to find memory resource for uart\n"); + return -EINVAL; + } + + dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); + + port->mapbase = res->start; + port->membase = S3C_VA_UART + (res->start & 0xfffff); + ret = platform_get_irq(platdev, 0); + if (ret < 0) + port->irq = 0; + else { + port->irq = ret; + ourport->rx_irq = ret; + ourport->tx_irq = ret + 1; + } + + ret = platform_get_irq(platdev, 1); + if (ret > 0) + ourport->tx_irq = ret; + + ourport->clk = clk_get(&platdev->dev, "uart"); + + dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n", + port->mapbase, port->membase, port->irq, + ourport->rx_irq, ourport->tx_irq, port->uartclk); + + /* reset the fifos (and setup the uart) */ + s3c24xx_serial_resetport(port, cfg); + return 0; +} + +static ssize_t s3c24xx_serial_show_clksrc(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct uart_port *port = s3c24xx_dev_to_port(dev); + struct s3c24xx_uart_port *ourport = to_ourport(port); + + return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name); +} + +static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL); + +/* Device driver serial port probe */ + +static int probe_index; + +int s3c24xx_serial_probe(struct platform_device *dev, + struct s3c24xx_uart_info *info) +{ + struct s3c24xx_uart_port *ourport; + int ret; + + dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index); + + ourport = &s3c24xx_serial_ports[probe_index]; + probe_index++; + + dbg("%s: initialising port %p...\n", __func__, ourport); + + ret = s3c24xx_serial_init_port(ourport, info, dev); + if (ret < 0) + goto probe_err; + + dbg("%s: adding port\n", __func__); + uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); + platform_set_drvdata(dev, &ourport->port); + + ret = device_create_file(&dev->dev, &dev_attr_clock_source); + if (ret < 0) + printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__); + + ret = s3c24xx_serial_cpufreq_register(ourport); + if (ret < 0) + dev_err(&dev->dev, "failed to add cpufreq notifier\n"); + + return 0; + + probe_err: + return ret; +} + +EXPORT_SYMBOL_GPL(s3c24xx_serial_probe); + +int __devexit s3c24xx_serial_remove(struct platform_device *dev) +{ + struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); + + if (port) { + s3c24xx_serial_cpufreq_deregister(to_ourport(port)); + device_remove_file(&dev->dev, &dev_attr_clock_source); + uart_remove_one_port(&s3c24xx_uart_drv, port); + } + + return 0; +} + +EXPORT_SYMBOL_GPL(s3c24xx_serial_remove); + +/* UART power management code */ + +#ifdef CONFIG_PM + +static int s3c24xx_serial_suspend(struct platform_device *dev, pm_message_t state) +{ + struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); + + if (port) + uart_suspend_port(&s3c24xx_uart_drv, port); + + return 0; +} + +static int s3c24xx_serial_resume(struct platform_device *dev) +{ + struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); + struct s3c24xx_uart_port *ourport = to_ourport(port); + + if (port) { + clk_enable(ourport->clk); + s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port)); + clk_disable(ourport->clk); + + uart_resume_port(&s3c24xx_uart_drv, port); + } + + return 0; +} +#endif + +int s3c24xx_serial_init(struct platform_driver *drv, + struct s3c24xx_uart_info *info) +{ + dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); + +#ifdef CONFIG_PM + drv->suspend = s3c24xx_serial_suspend; + drv->resume = s3c24xx_serial_resume; +#endif + + return platform_driver_register(drv); +} + +EXPORT_SYMBOL_GPL(s3c24xx_serial_init); + +/* module initialisation code */ + +static int __init s3c24xx_serial_modinit(void) +{ + int ret; + + ret = uart_register_driver(&s3c24xx_uart_drv); + if (ret < 0) { + printk(KERN_ERR "failed to register UART driver\n"); + return -1; + } + + return 0; +} + +static void __exit s3c24xx_serial_modexit(void) +{ + uart_unregister_driver(&s3c24xx_uart_drv); +} + +module_init(s3c24xx_serial_modinit); +module_exit(s3c24xx_serial_modexit); + +/* Console code */ + +#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE + +static struct uart_port *cons_uart; + +static int +s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned long ufstat, utrstat; + + if (ufcon & S3C2410_UFCON_FIFOMODE) { + /* fifo mode - check amount of data in fifo registers... */ + + ufstat = rd_regl(port, S3C2410_UFSTAT); + return (ufstat & info->tx_fifofull) ? 0 : 1; + } + + /* in non-fifo mode, we go and use the tx buffer empty */ + + utrstat = rd_regl(port, S3C2410_UTRSTAT); + return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0; +} + +static void +s3c24xx_serial_console_putchar(struct uart_port *port, int ch) +{ + unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON); + while (!s3c24xx_serial_console_txrdy(port, ufcon)) + barrier(); + wr_regb(cons_uart, S3C2410_UTXH, ch); +} + +static void +s3c24xx_serial_console_write(struct console *co, const char *s, + unsigned int count) +{ + uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar); +} + +static void __init +s3c24xx_serial_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + struct s3c24xx_uart_clksrc clksrc; + struct clk *clk; + unsigned int ulcon; + unsigned int ucon; + unsigned int ubrdiv; + unsigned long rate; + + ulcon = rd_regl(port, S3C2410_ULCON); + ucon = rd_regl(port, S3C2410_UCON); + ubrdiv = rd_regl(port, S3C2410_UBRDIV); + + dbg("s3c24xx_serial_get_options: port=%p\n" + "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n", + port, ulcon, ucon, ubrdiv); + + if ((ucon & 0xf) != 0) { + /* consider the serial port configured if the tx/rx mode set */ + + switch (ulcon & S3C2410_LCON_CSMASK) { + case S3C2410_LCON_CS5: + *bits = 5; + break; + case S3C2410_LCON_CS6: + *bits = 6; + break; + case S3C2410_LCON_CS7: + *bits = 7; + break; + default: + case S3C2410_LCON_CS8: + *bits = 8; + break; + } + + switch (ulcon & S3C2410_LCON_PMASK) { + case S3C2410_LCON_PEVEN: + *parity = 'e'; + break; + + case S3C2410_LCON_PODD: + *parity = 'o'; + break; + + case S3C2410_LCON_PNONE: + default: + *parity = 'n'; + } + + /* now calculate the baud rate */ + + s3c24xx_serial_getsource(port, &clksrc); + + clk = clk_get(port->dev, clksrc.name); + if (!IS_ERR(clk) && clk != NULL) + rate = clk_get_rate(clk) / clksrc.divisor; + else + rate = 1; + + + *baud = rate / (16 * (ubrdiv + 1)); + dbg("calculated baud %d\n", *baud); + } + +} + +/* s3c24xx_serial_init_ports + * + * initialise the serial ports from the machine provided initialisation + * data. +*/ + +static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info) +{ + struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports; + struct platform_device **platdev_ptr; + int i; + + dbg("s3c24xx_serial_init_ports: initialising ports...\n"); + + platdev_ptr = s3c24xx_uart_devs; + + for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) { + s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr); + } + + return 0; +} + +static int __init +s3c24xx_serial_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n", + co, co->index, options); + + /* is this a valid port */ + + if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS) + co->index = 0; + + port = &s3c24xx_serial_ports[co->index].port; + + /* is the port configured? */ + + if (port->mapbase == 0x0) { + co->index = 0; + port = &s3c24xx_serial_ports[co->index].port; + } + + cons_uart = port; + + dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index); + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + s3c24xx_serial_get_options(port, &baud, &parity, &bits); + + dbg("s3c24xx_serial_console_setup: baud %d\n", baud); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +/* s3c24xx_serial_initconsole + * + * initialise the console from one of the uart drivers +*/ + +static struct console s3c24xx_serial_console = { + .name = S3C24XX_SERIAL_NAME, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, + .write = s3c24xx_serial_console_write, + .setup = s3c24xx_serial_console_setup +}; + +int s3c24xx_serial_initconsole(struct platform_driver *drv, + struct s3c24xx_uart_info **info) + +{ + struct platform_device *dev = s3c24xx_uart_devs[0]; + + dbg("s3c24xx_serial_initconsole\n"); + + /* select driver based on the cpu */ + + if (dev == NULL) { + printk(KERN_ERR "s3c24xx: no devices for console init\n"); + return 0; + } + + if (strcmp(dev->name, drv->driver.name) != 0) + return 0; + + s3c24xx_serial_console.data = &s3c24xx_uart_drv; + s3c24xx_serial_init_ports(info); + + register_console(&s3c24xx_serial_console); + return 0; +} + +#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ + +MODULE_DESCRIPTION("Samsung SoC Serial port driver"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h new file mode 100644 index 000000000000..0ac06a07d25f --- /dev/null +++ b/drivers/tty/serial/samsung.h @@ -0,0 +1,120 @@ +/* linux/drivers/serial/samsung.h + * + * Driver for Samsung SoC onboard UARTs. + * + * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +struct s3c24xx_uart_info { + char *name; + unsigned int type; + unsigned int fifosize; + unsigned long rx_fifomask; + unsigned long rx_fifoshift; + unsigned long rx_fifofull; + unsigned long tx_fifomask; + unsigned long tx_fifoshift; + unsigned long tx_fifofull; + + /* uart port features */ + + unsigned int has_divslot:1; + + /* clock source control */ + + int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); + int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); + + /* uart controls */ + int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *); +}; + +struct s3c24xx_uart_port { + unsigned char rx_claimed; + unsigned char tx_claimed; + unsigned int pm_level; + unsigned long baudclk_rate; + + unsigned int rx_irq; + unsigned int tx_irq; + + struct s3c24xx_uart_info *info; + struct s3c24xx_uart_clksrc *clksrc; + struct clk *clk; + struct clk *baudclk; + struct uart_port port; + +#ifdef CONFIG_CPU_FREQ + struct notifier_block freq_transition; +#endif +}; + +/* conversion functions */ + +#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev) +#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data) + +/* register access controls */ + +#define portaddr(port, reg) ((port)->membase + (reg)) + +#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg))) +#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg))) + +#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg)) +#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg)) + +extern int s3c24xx_serial_probe(struct platform_device *dev, + struct s3c24xx_uart_info *uart); + +extern int __devexit s3c24xx_serial_remove(struct platform_device *dev); + +extern int s3c24xx_serial_initconsole(struct platform_driver *drv, + struct s3c24xx_uart_info **uart); + +extern int s3c24xx_serial_init(struct platform_driver *drv, + struct s3c24xx_uart_info *info); + +#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE + +#define s3c24xx_console_init(__drv, __inf) \ +static int __init s3c_serial_console_init(void) \ +{ \ + struct s3c24xx_uart_info *uinfo[CONFIG_SERIAL_SAMSUNG_UARTS]; \ + int i; \ + \ + for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++) \ + uinfo[i] = __inf; \ + return s3c24xx_serial_initconsole(__drv, uinfo); \ +} \ + \ +console_initcall(s3c_serial_console_init) + +#else +#define s3c24xx_console_init(drv, inf) extern void no_console(void) +#endif + +#ifdef CONFIG_SERIAL_SAMSUNG_DEBUG + +extern void printascii(const char *); + +static void dbg(const char *fmt, ...) +{ + va_list va; + char buff[256]; + + va_start(va, fmt); + vsprintf(buff, fmt, va); + va_end(va); + + printascii(buff); +} + +#else +#define dbg(x...) do { } while (0) +#endif diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c new file mode 100644 index 000000000000..a2f2b3254499 --- /dev/null +++ b/drivers/tty/serial/sb1250-duart.c @@ -0,0 +1,976 @@ +/* + * drivers/serial/sb1250-duart.c + * + * Support for the asynchronous serial interface (DUART) included + * in the BCM1250 and derived System-On-a-Chip (SOC) devices. + * + * Copyright (c) 2007 Maciej W. Rozycki + * + * Derived from drivers/char/sb1250_duart.c for which the following + * copyright applies: + * + * Copyright (c) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * References: + * + * "BCM1250/BCM1125/BCM1125H User Manual", Broadcom Corporation + */ + +#if defined(CONFIG_SERIAL_SB1250_DUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + + +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#include +#include + +#define SBD_CHANREGS(line) A_BCM1480_DUART_CHANREG((line), 0) +#define SBD_CTRLREGS(line) A_BCM1480_DUART_CTRLREG((line), 0) +#define SBD_INT(line) (K_BCM1480_INT_UART_0 + (line)) + +#define DUART_CHANREG_SPACING BCM1480_DUART_CHANREG_SPACING + +#define R_DUART_IMRREG(line) R_BCM1480_DUART_IMRREG(line) +#define R_DUART_INCHREG(line) R_BCM1480_DUART_INCHREG(line) +#define R_DUART_ISRREG(line) R_BCM1480_DUART_ISRREG(line) + +#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) +#include +#include + +#define SBD_CHANREGS(line) A_DUART_CHANREG((line), 0) +#define SBD_CTRLREGS(line) A_DUART_CTRLREG(0) +#define SBD_INT(line) (K_INT_UART_0 + (line)) + +#else +#error invalid SB1250 UART configuration + +#endif + + +MODULE_AUTHOR("Maciej W. Rozycki "); +MODULE_DESCRIPTION("BCM1xxx on-chip DUART serial driver"); +MODULE_LICENSE("GPL"); + + +#define DUART_MAX_CHIP 2 +#define DUART_MAX_SIDE 2 + +/* + * Per-port state. + */ +struct sbd_port { + struct sbd_duart *duart; + struct uart_port port; + unsigned char __iomem *memctrl; + int tx_stopped; + int initialised; +}; + +/* + * Per-DUART state for the shared register space. + */ +struct sbd_duart { + struct sbd_port sport[2]; + unsigned long mapctrl; + atomic_t map_guard; +}; + +#define to_sport(uport) container_of(uport, struct sbd_port, port) + +static struct sbd_duart sbd_duarts[DUART_MAX_CHIP]; + + +/* + * Reading and writing SB1250 DUART registers. + * + * There are three register spaces: two per-channel ones and + * a shared one. We have to define accessors appropriately. + * All registers are 64-bit and all but the Baud Rate Clock + * registers only define 8 least significant bits. There is + * also a workaround to take into account. Raw accessors use + * the full register width, but cooked ones truncate it + * intentionally so that the rest of the driver does not care. + */ +static u64 __read_sbdchn(struct sbd_port *sport, int reg) +{ + void __iomem *csr = sport->port.membase + reg; + + return __raw_readq(csr); +} + +static u64 __read_sbdshr(struct sbd_port *sport, int reg) +{ + void __iomem *csr = sport->memctrl + reg; + + return __raw_readq(csr); +} + +static void __write_sbdchn(struct sbd_port *sport, int reg, u64 value) +{ + void __iomem *csr = sport->port.membase + reg; + + __raw_writeq(value, csr); +} + +static void __write_sbdshr(struct sbd_port *sport, int reg, u64 value) +{ + void __iomem *csr = sport->memctrl + reg; + + __raw_writeq(value, csr); +} + +/* + * In bug 1956, we get glitches that can mess up uart registers. This + * "read-mode-reg after any register access" is an accepted workaround. + */ +static void __war_sbd1956(struct sbd_port *sport) +{ + __read_sbdchn(sport, R_DUART_MODE_REG_1); + __read_sbdchn(sport, R_DUART_MODE_REG_2); +} + +static unsigned char read_sbdchn(struct sbd_port *sport, int reg) +{ + unsigned char retval; + + retval = __read_sbdchn(sport, reg); + if (SIBYTE_1956_WAR) + __war_sbd1956(sport); + return retval; +} + +static unsigned char read_sbdshr(struct sbd_port *sport, int reg) +{ + unsigned char retval; + + retval = __read_sbdshr(sport, reg); + if (SIBYTE_1956_WAR) + __war_sbd1956(sport); + return retval; +} + +static void write_sbdchn(struct sbd_port *sport, int reg, unsigned int value) +{ + __write_sbdchn(sport, reg, value); + if (SIBYTE_1956_WAR) + __war_sbd1956(sport); +} + +static void write_sbdshr(struct sbd_port *sport, int reg, unsigned int value) +{ + __write_sbdshr(sport, reg, value); + if (SIBYTE_1956_WAR) + __war_sbd1956(sport); +} + + +static int sbd_receive_ready(struct sbd_port *sport) +{ + return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_RX_RDY; +} + +static int sbd_receive_drain(struct sbd_port *sport) +{ + int loops = 10000; + + while (sbd_receive_ready(sport) && --loops) + read_sbdchn(sport, R_DUART_RX_HOLD); + return loops; +} + +static int __maybe_unused sbd_transmit_ready(struct sbd_port *sport) +{ + return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_TX_RDY; +} + +static int __maybe_unused sbd_transmit_drain(struct sbd_port *sport) +{ + int loops = 10000; + + while (!sbd_transmit_ready(sport) && --loops) + udelay(2); + return loops; +} + +static int sbd_transmit_empty(struct sbd_port *sport) +{ + return read_sbdchn(sport, R_DUART_STATUS) & M_DUART_TX_EMT; +} + +static int sbd_line_drain(struct sbd_port *sport) +{ + int loops = 10000; + + while (!sbd_transmit_empty(sport) && --loops) + udelay(2); + return loops; +} + + +static unsigned int sbd_tx_empty(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + + return sbd_transmit_empty(sport) ? TIOCSER_TEMT : 0; +} + +static unsigned int sbd_get_mctrl(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + unsigned int mctrl, status; + + status = read_sbdshr(sport, R_DUART_IN_PORT); + status >>= (uport->line) % 2; + mctrl = (!(status & M_DUART_IN_PIN0_VAL) ? TIOCM_CTS : 0) | + (!(status & M_DUART_IN_PIN4_VAL) ? TIOCM_CAR : 0) | + (!(status & M_DUART_RIN0_PIN) ? TIOCM_RNG : 0) | + (!(status & M_DUART_IN_PIN2_VAL) ? TIOCM_DSR : 0); + return mctrl; +} + +static void sbd_set_mctrl(struct uart_port *uport, unsigned int mctrl) +{ + struct sbd_port *sport = to_sport(uport); + unsigned int clr = 0, set = 0, mode2; + + if (mctrl & TIOCM_DTR) + set |= M_DUART_SET_OPR2; + else + clr |= M_DUART_CLR_OPR2; + if (mctrl & TIOCM_RTS) + set |= M_DUART_SET_OPR0; + else + clr |= M_DUART_CLR_OPR0; + clr <<= (uport->line) % 2; + set <<= (uport->line) % 2; + + mode2 = read_sbdchn(sport, R_DUART_MODE_REG_2); + mode2 &= ~M_DUART_CHAN_MODE; + if (mctrl & TIOCM_LOOP) + mode2 |= V_DUART_CHAN_MODE_LCL_LOOP; + else + mode2 |= V_DUART_CHAN_MODE_NORMAL; + + write_sbdshr(sport, R_DUART_CLEAR_OPR, clr); + write_sbdshr(sport, R_DUART_SET_OPR, set); + write_sbdchn(sport, R_DUART_MODE_REG_2, mode2); +} + +static void sbd_stop_tx(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS); + sport->tx_stopped = 1; +}; + +static void sbd_start_tx(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + unsigned int mask; + + /* Enable tx interrupts. */ + mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); + mask |= M_DUART_IMR_TX; + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); + + /* Go!, go!, go!... */ + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_EN); + sport->tx_stopped = 0; +}; + +static void sbd_stop_rx(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), 0); +}; + +static void sbd_enable_ms(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + + write_sbdchn(sport, R_DUART_AUXCTL_X, + M_DUART_CIN_CHNG_ENA | M_DUART_CTS_CHNG_ENA); +} + +static void sbd_break_ctl(struct uart_port *uport, int break_state) +{ + struct sbd_port *sport = to_sport(uport); + + if (break_state == -1) + write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_START_BREAK); + else + write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_STOP_BREAK); +} + + +static void sbd_receive_chars(struct sbd_port *sport) +{ + struct uart_port *uport = &sport->port; + struct uart_icount *icount; + unsigned int status, ch, flag; + int count; + + for (count = 16; count; count--) { + status = read_sbdchn(sport, R_DUART_STATUS); + if (!(status & M_DUART_RX_RDY)) + break; + + ch = read_sbdchn(sport, R_DUART_RX_HOLD); + + flag = TTY_NORMAL; + + icount = &uport->icount; + icount->rx++; + + if (unlikely(status & + (M_DUART_RCVD_BRK | M_DUART_FRM_ERR | + M_DUART_PARITY_ERR | M_DUART_OVRUN_ERR))) { + if (status & M_DUART_RCVD_BRK) { + icount->brk++; + if (uart_handle_break(uport)) + continue; + } else if (status & M_DUART_FRM_ERR) + icount->frame++; + else if (status & M_DUART_PARITY_ERR) + icount->parity++; + if (status & M_DUART_OVRUN_ERR) + icount->overrun++; + + status &= uport->read_status_mask; + if (status & M_DUART_RCVD_BRK) + flag = TTY_BREAK; + else if (status & M_DUART_FRM_ERR) + flag = TTY_FRAME; + else if (status & M_DUART_PARITY_ERR) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(uport, ch)) + continue; + + uart_insert_char(uport, status, M_DUART_OVRUN_ERR, ch, flag); + } + + tty_flip_buffer_push(uport->state->port.tty); +} + +static void sbd_transmit_chars(struct sbd_port *sport) +{ + struct uart_port *uport = &sport->port; + struct circ_buf *xmit = &sport->port.state->xmit; + unsigned int mask; + int stop_tx; + + /* XON/XOFF chars. */ + if (sport->port.x_char) { + write_sbdchn(sport, R_DUART_TX_HOLD, sport->port.x_char); + sport->port.icount.tx++; + sport->port.x_char = 0; + return; + } + + /* If nothing to do or stopped or hardware stopped. */ + stop_tx = (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)); + + /* Send char. */ + if (!stop_tx) { + write_sbdchn(sport, R_DUART_TX_HOLD, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + } + + /* Are we are done? */ + if (stop_tx || uart_circ_empty(xmit)) { + /* Disable tx interrupts. */ + mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); + mask &= ~M_DUART_IMR_TX; + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); + } +} + +static void sbd_status_handle(struct sbd_port *sport) +{ + struct uart_port *uport = &sport->port; + unsigned int delta; + + delta = read_sbdshr(sport, R_DUART_INCHREG((uport->line) % 2)); + delta >>= (uport->line) % 2; + + if (delta & (M_DUART_IN_PIN0_VAL << S_DUART_IN_PIN_CHNG)) + uart_handle_cts_change(uport, !(delta & M_DUART_IN_PIN0_VAL)); + + if (delta & (M_DUART_IN_PIN2_VAL << S_DUART_IN_PIN_CHNG)) + uport->icount.dsr++; + + if (delta & ((M_DUART_IN_PIN2_VAL | M_DUART_IN_PIN0_VAL) << + S_DUART_IN_PIN_CHNG)) + wake_up_interruptible(&uport->state->port.delta_msr_wait); +} + +static irqreturn_t sbd_interrupt(int irq, void *dev_id) +{ + struct sbd_port *sport = dev_id; + struct uart_port *uport = &sport->port; + irqreturn_t status = IRQ_NONE; + unsigned int intstat; + int count; + + for (count = 16; count; count--) { + intstat = read_sbdshr(sport, + R_DUART_ISRREG((uport->line) % 2)); + intstat &= read_sbdshr(sport, + R_DUART_IMRREG((uport->line) % 2)); + intstat &= M_DUART_ISR_ALL; + if (!intstat) + break; + + if (intstat & M_DUART_ISR_RX) + sbd_receive_chars(sport); + if (intstat & M_DUART_ISR_IN) + sbd_status_handle(sport); + if (intstat & M_DUART_ISR_TX) + sbd_transmit_chars(sport); + + status = IRQ_HANDLED; + } + + return status; +} + + +static int sbd_startup(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + unsigned int mode1; + int ret; + + ret = request_irq(sport->port.irq, sbd_interrupt, + IRQF_SHARED, "sb1250-duart", sport); + if (ret) + return ret; + + /* Clear the receive FIFO. */ + sbd_receive_drain(sport); + + /* Clear the interrupt registers. */ + write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT); + read_sbdshr(sport, R_DUART_INCHREG((uport->line) % 2)); + + /* Set rx/tx interrupt to FIFO available. */ + mode1 = read_sbdchn(sport, R_DUART_MODE_REG_1); + mode1 &= ~(M_DUART_RX_IRQ_SEL_RXFULL | M_DUART_TX_IRQ_SEL_TXEMPT); + write_sbdchn(sport, R_DUART_MODE_REG_1, mode1); + + /* Disable tx, enable rx. */ + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_EN); + sport->tx_stopped = 1; + + /* Enable interrupts. */ + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), + M_DUART_IMR_IN | M_DUART_IMR_RX); + + return 0; +} + +static void sbd_shutdown(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_DIS); + sport->tx_stopped = 1; + free_irq(sport->port.irq, sport); +} + + +static void sbd_init_port(struct sbd_port *sport) +{ + struct uart_port *uport = &sport->port; + + if (sport->initialised) + return; + + /* There is no DUART reset feature, so just set some sane defaults. */ + write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_TX); + write_sbdchn(sport, R_DUART_CMD, V_DUART_MISC_CMD_RESET_RX); + write_sbdchn(sport, R_DUART_MODE_REG_1, V_DUART_BITS_PER_CHAR_8); + write_sbdchn(sport, R_DUART_MODE_REG_2, 0); + write_sbdchn(sport, R_DUART_FULL_CTL, + V_DUART_INT_TIME(0) | V_DUART_SIG_FULL(15)); + write_sbdchn(sport, R_DUART_OPCR_X, 0); + write_sbdchn(sport, R_DUART_AUXCTL_X, 0); + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), 0); + + sport->initialised = 1; +} + +static void sbd_set_termios(struct uart_port *uport, struct ktermios *termios, + struct ktermios *old_termios) +{ + struct sbd_port *sport = to_sport(uport); + unsigned int mode1 = 0, mode2 = 0, aux = 0; + unsigned int mode1mask = 0, mode2mask = 0, auxmask = 0; + unsigned int oldmode1, oldmode2, oldaux; + unsigned int baud, brg; + unsigned int command; + + mode1mask |= ~(M_DUART_PARITY_MODE | M_DUART_PARITY_TYPE_ODD | + M_DUART_BITS_PER_CHAR); + mode2mask |= ~M_DUART_STOP_BIT_LEN_2; + auxmask |= ~M_DUART_CTS_CHNG_ENA; + + /* Byte size. */ + switch (termios->c_cflag & CSIZE) { + case CS5: + case CS6: + /* Unsupported, leave unchanged. */ + mode1mask |= M_DUART_PARITY_MODE; + break; + case CS7: + mode1 |= V_DUART_BITS_PER_CHAR_7; + break; + case CS8: + default: + mode1 |= V_DUART_BITS_PER_CHAR_8; + break; + } + + /* Parity and stop bits. */ + if (termios->c_cflag & CSTOPB) + mode2 |= M_DUART_STOP_BIT_LEN_2; + else + mode2 |= M_DUART_STOP_BIT_LEN_1; + if (termios->c_cflag & PARENB) + mode1 |= V_DUART_PARITY_MODE_ADD; + else + mode1 |= V_DUART_PARITY_MODE_NONE; + if (termios->c_cflag & PARODD) + mode1 |= M_DUART_PARITY_TYPE_ODD; + else + mode1 |= M_DUART_PARITY_TYPE_EVEN; + + baud = uart_get_baud_rate(uport, termios, old_termios, 1200, 5000000); + brg = V_DUART_BAUD_RATE(baud); + /* The actual lower bound is 1221bps, so compensate. */ + if (brg > M_DUART_CLK_COUNTER) + brg = M_DUART_CLK_COUNTER; + + uart_update_timeout(uport, termios->c_cflag, baud); + + uport->read_status_mask = M_DUART_OVRUN_ERR; + if (termios->c_iflag & INPCK) + uport->read_status_mask |= M_DUART_FRM_ERR | + M_DUART_PARITY_ERR; + if (termios->c_iflag & (BRKINT | PARMRK)) + uport->read_status_mask |= M_DUART_RCVD_BRK; + + uport->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + uport->ignore_status_mask |= M_DUART_FRM_ERR | + M_DUART_PARITY_ERR; + if (termios->c_iflag & IGNBRK) { + uport->ignore_status_mask |= M_DUART_RCVD_BRK; + if (termios->c_iflag & IGNPAR) + uport->ignore_status_mask |= M_DUART_OVRUN_ERR; + } + + if (termios->c_cflag & CREAD) + command = M_DUART_RX_EN; + else + command = M_DUART_RX_DIS; + + if (termios->c_cflag & CRTSCTS) + aux |= M_DUART_CTS_CHNG_ENA; + else + aux &= ~M_DUART_CTS_CHNG_ENA; + + spin_lock(&uport->lock); + + if (sport->tx_stopped) + command |= M_DUART_TX_DIS; + else + command |= M_DUART_TX_EN; + + oldmode1 = read_sbdchn(sport, R_DUART_MODE_REG_1) & mode1mask; + oldmode2 = read_sbdchn(sport, R_DUART_MODE_REG_2) & mode2mask; + oldaux = read_sbdchn(sport, R_DUART_AUXCTL_X) & auxmask; + + if (!sport->tx_stopped) + sbd_line_drain(sport); + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS | M_DUART_RX_DIS); + + write_sbdchn(sport, R_DUART_MODE_REG_1, mode1 | oldmode1); + write_sbdchn(sport, R_DUART_MODE_REG_2, mode2 | oldmode2); + write_sbdchn(sport, R_DUART_CLK_SEL, brg); + write_sbdchn(sport, R_DUART_AUXCTL_X, aux | oldaux); + + write_sbdchn(sport, R_DUART_CMD, command); + + spin_unlock(&uport->lock); +} + + +static const char *sbd_type(struct uart_port *uport) +{ + return "SB1250 DUART"; +} + +static void sbd_release_port(struct uart_port *uport) +{ + struct sbd_port *sport = to_sport(uport); + struct sbd_duart *duart = sport->duart; + int map_guard; + + iounmap(sport->memctrl); + sport->memctrl = NULL; + iounmap(uport->membase); + uport->membase = NULL; + + map_guard = atomic_add_return(-1, &duart->map_guard); + if (!map_guard) + release_mem_region(duart->mapctrl, DUART_CHANREG_SPACING); + release_mem_region(uport->mapbase, DUART_CHANREG_SPACING); +} + +static int sbd_map_port(struct uart_port *uport) +{ + const char *err = KERN_ERR "sbd: Cannot map MMIO\n"; + struct sbd_port *sport = to_sport(uport); + struct sbd_duart *duart = sport->duart; + + if (!uport->membase) + uport->membase = ioremap_nocache(uport->mapbase, + DUART_CHANREG_SPACING); + if (!uport->membase) { + printk(err); + return -ENOMEM; + } + + if (!sport->memctrl) + sport->memctrl = ioremap_nocache(duart->mapctrl, + DUART_CHANREG_SPACING); + if (!sport->memctrl) { + printk(err); + iounmap(uport->membase); + uport->membase = NULL; + return -ENOMEM; + } + + return 0; +} + +static int sbd_request_port(struct uart_port *uport) +{ + const char *err = KERN_ERR "sbd: Unable to reserve MMIO resource\n"; + struct sbd_duart *duart = to_sport(uport)->duart; + int map_guard; + int ret = 0; + + if (!request_mem_region(uport->mapbase, DUART_CHANREG_SPACING, + "sb1250-duart")) { + printk(err); + return -EBUSY; + } + map_guard = atomic_add_return(1, &duart->map_guard); + if (map_guard == 1) { + if (!request_mem_region(duart->mapctrl, DUART_CHANREG_SPACING, + "sb1250-duart")) { + atomic_add(-1, &duart->map_guard); + printk(err); + ret = -EBUSY; + } + } + if (!ret) { + ret = sbd_map_port(uport); + if (ret) { + map_guard = atomic_add_return(-1, &duart->map_guard); + if (!map_guard) + release_mem_region(duart->mapctrl, + DUART_CHANREG_SPACING); + } + } + if (ret) { + release_mem_region(uport->mapbase, DUART_CHANREG_SPACING); + return ret; + } + return 0; +} + +static void sbd_config_port(struct uart_port *uport, int flags) +{ + struct sbd_port *sport = to_sport(uport); + + if (flags & UART_CONFIG_TYPE) { + if (sbd_request_port(uport)) + return; + + uport->type = PORT_SB1250_DUART; + + sbd_init_port(sport); + } +} + +static int sbd_verify_port(struct uart_port *uport, struct serial_struct *ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_SB1250_DUART) + ret = -EINVAL; + if (ser->irq != uport->irq) + ret = -EINVAL; + if (ser->baud_base != uport->uartclk / 16) + ret = -EINVAL; + return ret; +} + + +static const struct uart_ops sbd_ops = { + .tx_empty = sbd_tx_empty, + .set_mctrl = sbd_set_mctrl, + .get_mctrl = sbd_get_mctrl, + .stop_tx = sbd_stop_tx, + .start_tx = sbd_start_tx, + .stop_rx = sbd_stop_rx, + .enable_ms = sbd_enable_ms, + .break_ctl = sbd_break_ctl, + .startup = sbd_startup, + .shutdown = sbd_shutdown, + .set_termios = sbd_set_termios, + .type = sbd_type, + .release_port = sbd_release_port, + .request_port = sbd_request_port, + .config_port = sbd_config_port, + .verify_port = sbd_verify_port, +}; + +/* Initialize SB1250 DUART port structures. */ +static void __init sbd_probe_duarts(void) +{ + static int probed; + int chip, side; + int max_lines, line; + + if (probed) + return; + + /* Set the number of available units based on the SOC type. */ + switch (soc_type) { + case K_SYS_SOC_TYPE_BCM1x55: + case K_SYS_SOC_TYPE_BCM1x80: + max_lines = 4; + break; + default: + /* Assume at least two serial ports at the normal address. */ + max_lines = 2; + break; + } + + probed = 1; + + for (chip = 0, line = 0; chip < DUART_MAX_CHIP && line < max_lines; + chip++) { + sbd_duarts[chip].mapctrl = SBD_CTRLREGS(line); + + for (side = 0; side < DUART_MAX_SIDE && line < max_lines; + side++, line++) { + struct sbd_port *sport = &sbd_duarts[chip].sport[side]; + struct uart_port *uport = &sport->port; + + sport->duart = &sbd_duarts[chip]; + + uport->irq = SBD_INT(line); + uport->uartclk = 100000000 / 20 * 16; + uport->fifosize = 16; + uport->iotype = UPIO_MEM; + uport->flags = UPF_BOOT_AUTOCONF; + uport->ops = &sbd_ops; + uport->line = line; + uport->mapbase = SBD_CHANREGS(line); + } + } +} + + +#ifdef CONFIG_SERIAL_SB1250_DUART_CONSOLE +/* + * Serial console stuff. Very basic, polling driver for doing serial + * console output. The console_sem is held by the caller, so we + * shouldn't be interrupted for more console activity. + */ +static void sbd_console_putchar(struct uart_port *uport, int ch) +{ + struct sbd_port *sport = to_sport(uport); + + sbd_transmit_drain(sport); + write_sbdchn(sport, R_DUART_TX_HOLD, ch); +} + +static void sbd_console_write(struct console *co, const char *s, + unsigned int count) +{ + int chip = co->index / DUART_MAX_SIDE; + int side = co->index % DUART_MAX_SIDE; + struct sbd_port *sport = &sbd_duarts[chip].sport[side]; + struct uart_port *uport = &sport->port; + unsigned long flags; + unsigned int mask; + + /* Disable transmit interrupts and enable the transmitter. */ + spin_lock_irqsave(&uport->lock, flags); + mask = read_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2)); + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), + mask & ~M_DUART_IMR_TX); + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_EN); + spin_unlock_irqrestore(&uport->lock, flags); + + uart_console_write(&sport->port, s, count, sbd_console_putchar); + + /* Restore transmit interrupts and the transmitter enable. */ + spin_lock_irqsave(&uport->lock, flags); + sbd_line_drain(sport); + if (sport->tx_stopped) + write_sbdchn(sport, R_DUART_CMD, M_DUART_TX_DIS); + write_sbdshr(sport, R_DUART_IMRREG((uport->line) % 2), mask); + spin_unlock_irqrestore(&uport->lock, flags); +} + +static int __init sbd_console_setup(struct console *co, char *options) +{ + int chip = co->index / DUART_MAX_SIDE; + int side = co->index % DUART_MAX_SIDE; + struct sbd_port *sport = &sbd_duarts[chip].sport[side]; + struct uart_port *uport = &sport->port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + if (!sport->duart) + return -ENXIO; + + ret = sbd_map_port(uport); + if (ret) + return ret; + + sbd_init_port(sport); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + return uart_set_options(uport, co, baud, parity, bits, flow); +} + +static struct uart_driver sbd_reg; +static struct console sbd_console = { + .name = "duart", + .write = sbd_console_write, + .device = uart_console_device, + .setup = sbd_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sbd_reg +}; + +static int __init sbd_serial_console_init(void) +{ + sbd_probe_duarts(); + register_console(&sbd_console); + + return 0; +} + +console_initcall(sbd_serial_console_init); + +#define SERIAL_SB1250_DUART_CONSOLE &sbd_console +#else +#define SERIAL_SB1250_DUART_CONSOLE NULL +#endif /* CONFIG_SERIAL_SB1250_DUART_CONSOLE */ + + +static struct uart_driver sbd_reg = { + .owner = THIS_MODULE, + .driver_name = "sb1250_duart", + .dev_name = "duart", + .major = TTY_MAJOR, + .minor = SB1250_DUART_MINOR_BASE, + .nr = DUART_MAX_CHIP * DUART_MAX_SIDE, + .cons = SERIAL_SB1250_DUART_CONSOLE, +}; + +/* Set up the driver and register it. */ +static int __init sbd_init(void) +{ + int i, ret; + + sbd_probe_duarts(); + + ret = uart_register_driver(&sbd_reg); + if (ret) + return ret; + + for (i = 0; i < DUART_MAX_CHIP * DUART_MAX_SIDE; i++) { + struct sbd_duart *duart = &sbd_duarts[i / DUART_MAX_SIDE]; + struct sbd_port *sport = &duart->sport[i % DUART_MAX_SIDE]; + struct uart_port *uport = &sport->port; + + if (sport->duart) + uart_add_one_port(&sbd_reg, uport); + } + + return 0; +} + +/* Unload the driver. Unregister stuff, get ready to go away. */ +static void __exit sbd_exit(void) +{ + int i; + + for (i = DUART_MAX_CHIP * DUART_MAX_SIDE - 1; i >= 0; i--) { + struct sbd_duart *duart = &sbd_duarts[i / DUART_MAX_SIDE]; + struct sbd_port *sport = &duart->sport[i % DUART_MAX_SIDE]; + struct uart_port *uport = &sport->port; + + if (sport->duart) + uart_remove_one_port(&sbd_reg, uport); + } + + uart_unregister_driver(&sbd_reg); +} + +module_init(sbd_init); +module_exit(sbd_exit); diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c new file mode 100644 index 000000000000..75038ad2b242 --- /dev/null +++ b/drivers/tty/serial/sc26xx.c @@ -0,0 +1,757 @@ +/* + * SC268xx.c: Serial driver for Philiphs SC2681/SC2692 devices. + * + * Copyright (C) 2006,2007 Thomas Bogendörfer (tsbogend@alpha.franken.de) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#define SC26XX_MAJOR 204 +#define SC26XX_MINOR_START 205 +#define SC26XX_NR 2 + +struct uart_sc26xx_port { + struct uart_port port[2]; + u8 dsr_mask[2]; + u8 cts_mask[2]; + u8 dcd_mask[2]; + u8 ri_mask[2]; + u8 dtr_mask[2]; + u8 rts_mask[2]; + u8 imr; +}; + +/* register common to both ports */ +#define RD_ISR 0x14 +#define RD_IPR 0x34 + +#define WR_ACR 0x10 +#define WR_IMR 0x14 +#define WR_OPCR 0x34 +#define WR_OPR_SET 0x38 +#define WR_OPR_CLR 0x3C + +/* access common register */ +#define READ_SC(p, r) readb((p)->membase + RD_##r) +#define WRITE_SC(p, r, v) writeb((v), (p)->membase + WR_##r) + +/* register per port */ +#define RD_PORT_MRx 0x00 +#define RD_PORT_SR 0x04 +#define RD_PORT_RHR 0x0c + +#define WR_PORT_MRx 0x00 +#define WR_PORT_CSR 0x04 +#define WR_PORT_CR 0x08 +#define WR_PORT_THR 0x0c + +/* SR bits */ +#define SR_BREAK (1 << 7) +#define SR_FRAME (1 << 6) +#define SR_PARITY (1 << 5) +#define SR_OVERRUN (1 << 4) +#define SR_TXRDY (1 << 2) +#define SR_RXRDY (1 << 0) + +#define CR_RES_MR (1 << 4) +#define CR_RES_RX (2 << 4) +#define CR_RES_TX (3 << 4) +#define CR_STRT_BRK (6 << 4) +#define CR_STOP_BRK (7 << 4) +#define CR_DIS_TX (1 << 3) +#define CR_ENA_TX (1 << 2) +#define CR_DIS_RX (1 << 1) +#define CR_ENA_RX (1 << 0) + +/* ISR bits */ +#define ISR_RXRDYB (1 << 5) +#define ISR_TXRDYB (1 << 4) +#define ISR_RXRDYA (1 << 1) +#define ISR_TXRDYA (1 << 0) + +/* IMR bits */ +#define IMR_RXRDY (1 << 1) +#define IMR_TXRDY (1 << 0) + +/* access port register */ +static inline u8 read_sc_port(struct uart_port *p, u8 reg) +{ + return readb(p->membase + p->line * 0x20 + reg); +} + +static inline void write_sc_port(struct uart_port *p, u8 reg, u8 val) +{ + writeb(val, p->membase + p->line * 0x20 + reg); +} + +#define READ_SC_PORT(p, r) read_sc_port(p, RD_PORT_##r) +#define WRITE_SC_PORT(p, r, v) write_sc_port(p, WR_PORT_##r, v) + +static void sc26xx_enable_irq(struct uart_port *port, int mask) +{ + struct uart_sc26xx_port *up; + int line = port->line; + + port -= line; + up = container_of(port, struct uart_sc26xx_port, port[0]); + + up->imr |= mask << (line * 4); + WRITE_SC(port, IMR, up->imr); +} + +static void sc26xx_disable_irq(struct uart_port *port, int mask) +{ + struct uart_sc26xx_port *up; + int line = port->line; + + port -= line; + up = container_of(port, struct uart_sc26xx_port, port[0]); + + up->imr &= ~(mask << (line * 4)); + WRITE_SC(port, IMR, up->imr); +} + +static struct tty_struct *receive_chars(struct uart_port *port) +{ + struct tty_struct *tty = NULL; + int limit = 10000; + unsigned char ch; + char flag; + u8 status; + + if (port->state != NULL) /* Unopened serial console */ + tty = port->state->port.tty; + + while (limit-- > 0) { + status = READ_SC_PORT(port, SR); + if (!(status & SR_RXRDY)) + break; + ch = READ_SC_PORT(port, RHR); + + flag = TTY_NORMAL; + port->icount.rx++; + + if (unlikely(status & (SR_BREAK | SR_FRAME | + SR_PARITY | SR_OVERRUN))) { + if (status & SR_BREAK) { + status &= ~(SR_PARITY | SR_FRAME); + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (status & SR_PARITY) + port->icount.parity++; + else if (status & SR_FRAME) + port->icount.frame++; + if (status & SR_OVERRUN) + port->icount.overrun++; + + status &= port->read_status_mask; + if (status & SR_BREAK) + flag = TTY_BREAK; + else if (status & SR_PARITY) + flag = TTY_PARITY; + else if (status & SR_FRAME) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + continue; + + if (status & port->ignore_status_mask) + continue; + + tty_insert_flip_char(tty, ch, flag); + } + return tty; +} + +static void transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit; + + if (!port->state) + return; + + xmit = &port->state->xmit; + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + sc26xx_disable_irq(port, IMR_TXRDY); + return; + } + while (!uart_circ_empty(xmit)) { + if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) + break; + + WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static irqreturn_t sc26xx_interrupt(int irq, void *dev_id) +{ + struct uart_sc26xx_port *up = dev_id; + struct tty_struct *tty; + unsigned long flags; + u8 isr; + + spin_lock_irqsave(&up->port[0].lock, flags); + + tty = NULL; + isr = READ_SC(&up->port[0], ISR); + if (isr & ISR_TXRDYA) + transmit_chars(&up->port[0]); + if (isr & ISR_RXRDYA) + tty = receive_chars(&up->port[0]); + + spin_unlock(&up->port[0].lock); + + if (tty) + tty_flip_buffer_push(tty); + + spin_lock(&up->port[1].lock); + + tty = NULL; + if (isr & ISR_TXRDYB) + transmit_chars(&up->port[1]); + if (isr & ISR_RXRDYB) + tty = receive_chars(&up->port[1]); + + spin_unlock_irqrestore(&up->port[1].lock, flags); + + if (tty) + tty_flip_buffer_push(tty); + + return IRQ_HANDLED; +} + +/* port->lock is not held. */ +static unsigned int sc26xx_tx_empty(struct uart_port *port) +{ + return (READ_SC_PORT(port, SR) & SR_TXRDY) ? TIOCSER_TEMT : 0; +} + +/* port->lock held by caller. */ +static void sc26xx_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_sc26xx_port *up; + int line = port->line; + + port -= line; + up = container_of(port, struct uart_sc26xx_port, port[0]); + + if (up->dtr_mask[line]) { + if (mctrl & TIOCM_DTR) + WRITE_SC(port, OPR_SET, up->dtr_mask[line]); + else + WRITE_SC(port, OPR_CLR, up->dtr_mask[line]); + } + if (up->rts_mask[line]) { + if (mctrl & TIOCM_RTS) + WRITE_SC(port, OPR_SET, up->rts_mask[line]); + else + WRITE_SC(port, OPR_CLR, up->rts_mask[line]); + } +} + +/* port->lock is held by caller and interrupts are disabled. */ +static unsigned int sc26xx_get_mctrl(struct uart_port *port) +{ + struct uart_sc26xx_port *up; + int line = port->line; + unsigned int mctrl = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR; + u8 ipr; + + port -= line; + up = container_of(port, struct uart_sc26xx_port, port[0]); + ipr = READ_SC(port, IPR) ^ 0xff; + + if (up->dsr_mask[line]) { + mctrl &= ~TIOCM_DSR; + mctrl |= ipr & up->dsr_mask[line] ? TIOCM_DSR : 0; + } + if (up->cts_mask[line]) { + mctrl &= ~TIOCM_CTS; + mctrl |= ipr & up->cts_mask[line] ? TIOCM_CTS : 0; + } + if (up->dcd_mask[line]) { + mctrl &= ~TIOCM_CAR; + mctrl |= ipr & up->dcd_mask[line] ? TIOCM_CAR : 0; + } + if (up->ri_mask[line]) { + mctrl &= ~TIOCM_RNG; + mctrl |= ipr & up->ri_mask[line] ? TIOCM_RNG : 0; + } + return mctrl; +} + +/* port->lock held by caller. */ +static void sc26xx_stop_tx(struct uart_port *port) +{ + return; +} + +/* port->lock held by caller. */ +static void sc26xx_start_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + while (!uart_circ_empty(xmit)) { + if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) { + sc26xx_enable_irq(port, IMR_TXRDY); + break; + } + WRITE_SC_PORT(port, THR, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } +} + +/* port->lock held by caller. */ +static void sc26xx_stop_rx(struct uart_port *port) +{ +} + +/* port->lock held by caller. */ +static void sc26xx_enable_ms(struct uart_port *port) +{ +} + +/* port->lock is not held. */ +static void sc26xx_break_ctl(struct uart_port *port, int break_state) +{ + if (break_state == -1) + WRITE_SC_PORT(port, CR, CR_STRT_BRK); + else + WRITE_SC_PORT(port, CR, CR_STOP_BRK); +} + +/* port->lock is not held. */ +static int sc26xx_startup(struct uart_port *port) +{ + sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY); + WRITE_SC(port, OPCR, 0); + + /* reset tx and rx */ + WRITE_SC_PORT(port, CR, CR_RES_RX); + WRITE_SC_PORT(port, CR, CR_RES_TX); + + /* start rx/tx */ + WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX); + + /* enable irqs */ + sc26xx_enable_irq(port, IMR_RXRDY); + return 0; +} + +/* port->lock is not held. */ +static void sc26xx_shutdown(struct uart_port *port) +{ + /* disable interrupst */ + sc26xx_disable_irq(port, IMR_TXRDY | IMR_RXRDY); + + /* stop tx/rx */ + WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX); +} + +/* port->lock is not held. */ +static void sc26xx_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + unsigned int quot = uart_get_divisor(port, baud); + unsigned int iflag, cflag; + unsigned long flags; + u8 mr1, mr2, csr; + + spin_lock_irqsave(&port->lock, flags); + + while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc) + udelay(2); + + WRITE_SC_PORT(port, CR, CR_DIS_TX | CR_DIS_RX); + + iflag = termios->c_iflag; + cflag = termios->c_cflag; + + port->read_status_mask = SR_OVERRUN; + if (iflag & INPCK) + port->read_status_mask |= SR_PARITY | SR_FRAME; + if (iflag & (BRKINT | PARMRK)) + port->read_status_mask |= SR_BREAK; + + port->ignore_status_mask = 0; + if (iflag & IGNBRK) + port->ignore_status_mask |= SR_BREAK; + if ((cflag & CREAD) == 0) + port->ignore_status_mask |= SR_BREAK | SR_FRAME | + SR_PARITY | SR_OVERRUN; + + switch (cflag & CSIZE) { + case CS5: + mr1 = 0x00; + break; + case CS6: + mr1 = 0x01; + break; + case CS7: + mr1 = 0x02; + break; + default: + case CS8: + mr1 = 0x03; + break; + } + mr2 = 0x07; + if (cflag & CSTOPB) + mr2 = 0x0f; + if (cflag & PARENB) { + if (cflag & PARODD) + mr1 |= (1 << 2); + } else + mr1 |= (2 << 3); + + switch (baud) { + case 50: + csr = 0x00; + break; + case 110: + csr = 0x11; + break; + case 134: + csr = 0x22; + break; + case 200: + csr = 0x33; + break; + case 300: + csr = 0x44; + break; + case 600: + csr = 0x55; + break; + case 1200: + csr = 0x66; + break; + case 2400: + csr = 0x88; + break; + case 4800: + csr = 0x99; + break; + default: + case 9600: + csr = 0xbb; + break; + case 19200: + csr = 0xcc; + break; + } + + WRITE_SC_PORT(port, CR, CR_RES_MR); + WRITE_SC_PORT(port, MRx, mr1); + WRITE_SC_PORT(port, MRx, mr2); + + WRITE_SC(port, ACR, 0x80); + WRITE_SC_PORT(port, CSR, csr); + + /* reset tx and rx */ + WRITE_SC_PORT(port, CR, CR_RES_RX); + WRITE_SC_PORT(port, CR, CR_RES_TX); + + WRITE_SC_PORT(port, CR, CR_ENA_TX | CR_ENA_RX); + while ((READ_SC_PORT(port, SR) & ((1 << 3) | (1 << 2))) != 0xc) + udelay(2); + + /* XXX */ + uart_update_timeout(port, cflag, + (port->uartclk / (16 * quot))); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *sc26xx_type(struct uart_port *port) +{ + return "SC26XX"; +} + +static void sc26xx_release_port(struct uart_port *port) +{ +} + +static int sc26xx_request_port(struct uart_port *port) +{ + return 0; +} + +static void sc26xx_config_port(struct uart_port *port, int flags) +{ +} + +static int sc26xx_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static struct uart_ops sc26xx_ops = { + .tx_empty = sc26xx_tx_empty, + .set_mctrl = sc26xx_set_mctrl, + .get_mctrl = sc26xx_get_mctrl, + .stop_tx = sc26xx_stop_tx, + .start_tx = sc26xx_start_tx, + .stop_rx = sc26xx_stop_rx, + .enable_ms = sc26xx_enable_ms, + .break_ctl = sc26xx_break_ctl, + .startup = sc26xx_startup, + .shutdown = sc26xx_shutdown, + .set_termios = sc26xx_set_termios, + .type = sc26xx_type, + .release_port = sc26xx_release_port, + .request_port = sc26xx_request_port, + .config_port = sc26xx_config_port, + .verify_port = sc26xx_verify_port, +}; + +static struct uart_port *sc26xx_port; + +#ifdef CONFIG_SERIAL_SC26XX_CONSOLE +static void sc26xx_console_putchar(struct uart_port *port, char c) +{ + unsigned long flags; + int limit = 1000000; + + spin_lock_irqsave(&port->lock, flags); + + while (limit-- > 0) { + if (READ_SC_PORT(port, SR) & SR_TXRDY) { + WRITE_SC_PORT(port, THR, c); + break; + } + udelay(2); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void sc26xx_console_write(struct console *con, const char *s, unsigned n) +{ + struct uart_port *port = sc26xx_port; + int i; + + for (i = 0; i < n; i++) { + if (*s == '\n') + sc26xx_console_putchar(port, '\r'); + sc26xx_console_putchar(port, *s++); + } +} + +static int __init sc26xx_console_setup(struct console *con, char *options) +{ + struct uart_port *port = sc26xx_port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (port->type != PORT_SC26XX) + return -1; + + printk(KERN_INFO "Console: ttySC%d (SC26XX)\n", con->index); + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, con, baud, parity, bits, flow); +} + +static struct uart_driver sc26xx_reg; +static struct console sc26xx_console = { + .name = "ttySC", + .write = sc26xx_console_write, + .device = uart_console_device, + .setup = sc26xx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sc26xx_reg, +}; +#define SC26XX_CONSOLE &sc26xx_console +#else +#define SC26XX_CONSOLE NULL +#endif + +static struct uart_driver sc26xx_reg = { + .owner = THIS_MODULE, + .driver_name = "SC26xx", + .dev_name = "ttySC", + .major = SC26XX_MAJOR, + .minor = SC26XX_MINOR_START, + .nr = SC26XX_NR, + .cons = SC26XX_CONSOLE, +}; + +static u8 sc26xx_flags2mask(unsigned int flags, unsigned int bitpos) +{ + unsigned int bit = (flags >> bitpos) & 15; + + return bit ? (1 << (bit - 1)) : 0; +} + +static void __devinit sc26xx_init_masks(struct uart_sc26xx_port *up, + int line, unsigned int data) +{ + up->dtr_mask[line] = sc26xx_flags2mask(data, 0); + up->rts_mask[line] = sc26xx_flags2mask(data, 4); + up->dsr_mask[line] = sc26xx_flags2mask(data, 8); + up->cts_mask[line] = sc26xx_flags2mask(data, 12); + up->dcd_mask[line] = sc26xx_flags2mask(data, 16); + up->ri_mask[line] = sc26xx_flags2mask(data, 20); +} + +static int __devinit sc26xx_probe(struct platform_device *dev) +{ + struct resource *res; + struct uart_sc26xx_port *up; + unsigned int *sc26xx_data = dev->dev.platform_data; + int err; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + up = kzalloc(sizeof *up, GFP_KERNEL); + if (unlikely(!up)) + return -ENOMEM; + + up->port[0].line = 0; + up->port[0].ops = &sc26xx_ops; + up->port[0].type = PORT_SC26XX; + up->port[0].uartclk = (29491200 / 16); /* arbitrary */ + + up->port[0].mapbase = res->start; + up->port[0].membase = ioremap_nocache(up->port[0].mapbase, 0x40); + up->port[0].iotype = UPIO_MEM; + up->port[0].irq = platform_get_irq(dev, 0); + + up->port[0].dev = &dev->dev; + + sc26xx_init_masks(up, 0, sc26xx_data[0]); + + sc26xx_port = &up->port[0]; + + up->port[1].line = 1; + up->port[1].ops = &sc26xx_ops; + up->port[1].type = PORT_SC26XX; + up->port[1].uartclk = (29491200 / 16); /* arbitrary */ + + up->port[1].mapbase = up->port[0].mapbase; + up->port[1].membase = up->port[0].membase; + up->port[1].iotype = UPIO_MEM; + up->port[1].irq = up->port[0].irq; + + up->port[1].dev = &dev->dev; + + sc26xx_init_masks(up, 1, sc26xx_data[1]); + + err = uart_register_driver(&sc26xx_reg); + if (err) + goto out_free_port; + + sc26xx_reg.tty_driver->name_base = sc26xx_reg.minor; + + err = uart_add_one_port(&sc26xx_reg, &up->port[0]); + if (err) + goto out_unregister_driver; + + err = uart_add_one_port(&sc26xx_reg, &up->port[1]); + if (err) + goto out_remove_port0; + + err = request_irq(up->port[0].irq, sc26xx_interrupt, 0, "sc26xx", up); + if (err) + goto out_remove_ports; + + dev_set_drvdata(&dev->dev, up); + return 0; + +out_remove_ports: + uart_remove_one_port(&sc26xx_reg, &up->port[1]); +out_remove_port0: + uart_remove_one_port(&sc26xx_reg, &up->port[0]); + +out_unregister_driver: + uart_unregister_driver(&sc26xx_reg); + +out_free_port: + kfree(up); + sc26xx_port = NULL; + return err; +} + + +static int __exit sc26xx_driver_remove(struct platform_device *dev) +{ + struct uart_sc26xx_port *up = dev_get_drvdata(&dev->dev); + + free_irq(up->port[0].irq, up); + + uart_remove_one_port(&sc26xx_reg, &up->port[0]); + uart_remove_one_port(&sc26xx_reg, &up->port[1]); + + uart_unregister_driver(&sc26xx_reg); + + kfree(up); + sc26xx_port = NULL; + + dev_set_drvdata(&dev->dev, NULL); + return 0; +} + +static struct platform_driver sc26xx_driver = { + .probe = sc26xx_probe, + .remove = __devexit_p(sc26xx_driver_remove), + .driver = { + .name = "SC26xx", + .owner = THIS_MODULE, + }, +}; + +static int __init sc26xx_init(void) +{ + return platform_driver_register(&sc26xx_driver); +} + +static void __exit sc26xx_exit(void) +{ + platform_driver_unregister(&sc26xx_driver); +} + +module_init(sc26xx_init); +module_exit(sc26xx_exit); + + +MODULE_AUTHOR("Thomas Bogendörfer"); +MODULE_DESCRIPTION("SC681/SC2692 serial driver"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:SC26xx"); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c new file mode 100644 index 000000000000..460a72d91bb7 --- /dev/null +++ b/drivers/tty/serial/serial_core.c @@ -0,0 +1,2578 @@ +/* + * linux/drivers/char/core.c + * + * Driver core for serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for serial_state and serial_icounter_struct */ +#include +#include +#include + +#include +#include + +/* + * This is used to lock changes in serial line configuration. + */ +static DEFINE_MUTEX(port_mutex); + +/* + * lockdep: port->lock is initialized in two places, but we + * want only one lock-class: + */ +static struct lock_class_key port_lock_key; + +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) + +#ifdef CONFIG_SERIAL_CORE_CONSOLE +#define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line) +#else +#define uart_console(port) (0) +#endif + +static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, + struct ktermios *old_termios); +static void __uart_wait_until_sent(struct uart_port *port, int timeout); +static void uart_change_pm(struct uart_state *state, int pm_state); + +/* + * This routine is used by the interrupt handler to schedule processing in + * the software interrupt portion of the driver. + */ +void uart_write_wakeup(struct uart_port *port) +{ + struct uart_state *state = port->state; + /* + * This means you called this function _after_ the port was + * closed. No cookie for you. + */ + BUG_ON(!state); + tasklet_schedule(&state->tlet); +} + +static void uart_stop(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->uart_port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + port->ops->stop_tx(port); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void __uart_start(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->uart_port; + + if (!uart_circ_empty(&state->xmit) && state->xmit.buf && + !tty->stopped && !tty->hw_stopped) + port->ops->start_tx(port); +} + +static void uart_start(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->uart_port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + __uart_start(tty); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void uart_tasklet_action(unsigned long data) +{ + struct uart_state *state = (struct uart_state *)data; + tty_wakeup(state->port.tty); +} + +static inline void +uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear) +{ + unsigned long flags; + unsigned int old; + + spin_lock_irqsave(&port->lock, flags); + old = port->mctrl; + port->mctrl = (old & ~clear) | set; + if (old != port->mctrl) + port->ops->set_mctrl(port, port->mctrl); + spin_unlock_irqrestore(&port->lock, flags); +} + +#define uart_set_mctrl(port, set) uart_update_mctrl(port, set, 0) +#define uart_clear_mctrl(port, clear) uart_update_mctrl(port, 0, clear) + +/* + * Startup the port. This will be called once per open. All calls + * will be serialised by the per-port mutex. + */ +static int uart_startup(struct tty_struct *tty, struct uart_state *state, int init_hw) +{ + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; + unsigned long page; + int retval = 0; + + if (port->flags & ASYNC_INITIALIZED) + return 0; + + /* + * Set the TTY IO error marker - we will only clear this + * once we have successfully opened the port. Also set + * up the tty->alt_speed kludge + */ + set_bit(TTY_IO_ERROR, &tty->flags); + + if (uport->type == PORT_UNKNOWN) + return 0; + + /* + * Initialise and allocate the transmit and temporary + * buffer. + */ + if (!state->xmit.buf) { + /* This is protected by the per port mutex */ + page = get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + state->xmit.buf = (unsigned char *) page; + uart_circ_clear(&state->xmit); + } + + retval = uport->ops->startup(uport); + if (retval == 0) { + if (init_hw) { + /* + * Initialise the hardware port settings. + */ + uart_change_speed(tty, state, NULL); + + /* + * Setup the RTS and DTR signals once the + * port is open and ready to respond. + */ + if (tty->termios->c_cflag & CBAUD) + uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR); + } + + if (port->flags & ASYNC_CTS_FLOW) { + spin_lock_irq(&uport->lock); + if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS)) + tty->hw_stopped = 1; + spin_unlock_irq(&uport->lock); + } + + set_bit(ASYNCB_INITIALIZED, &port->flags); + + clear_bit(TTY_IO_ERROR, &tty->flags); + } + + if (retval && capable(CAP_SYS_ADMIN)) + retval = 0; + + return retval; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. Calls to + * uart_shutdown are serialised by the per-port semaphore. + */ +static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) +{ + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; + + /* + * Set the TTY IO error marker + */ + if (tty) + set_bit(TTY_IO_ERROR, &tty->flags); + + if (test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags)) { + /* + * Turn off DTR and RTS early. + */ + if (!tty || (tty->termios->c_cflag & HUPCL)) + uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); + + /* + * clear delta_msr_wait queue to avoid mem leaks: we may free + * the irq here so the queue might never be woken up. Note + * that we won't end up waiting on delta_msr_wait again since + * any outstanding file descriptors should be pointing at + * hung_up_tty_fops now. + */ + wake_up_interruptible(&port->delta_msr_wait); + + /* + * Free the IRQ and disable the port. + */ + uport->ops->shutdown(uport); + + /* + * Ensure that the IRQ handler isn't running on another CPU. + */ + synchronize_irq(uport->irq); + } + + /* + * kill off our tasklet + */ + tasklet_kill(&state->tlet); + + /* + * Free the transmit buffer page. + */ + if (state->xmit.buf) { + free_page((unsigned long)state->xmit.buf); + state->xmit.buf = NULL; + } +} + +/** + * uart_update_timeout - update per-port FIFO timeout. + * @port: uart_port structure describing the port + * @cflag: termios cflag value + * @baud: speed of the port + * + * Set the port FIFO timeout value. The @cflag value should + * reflect the actual hardware settings. + */ +void +uart_update_timeout(struct uart_port *port, unsigned int cflag, + unsigned int baud) +{ + unsigned int bits; + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: + bits = 7; + break; + case CS6: + bits = 8; + break; + case CS7: + bits = 9; + break; + default: + bits = 10; + break; /* CS8 */ + } + + if (cflag & CSTOPB) + bits++; + if (cflag & PARENB) + bits++; + + /* + * The total number of bits to be transmitted in the fifo. + */ + bits = bits * port->fifosize; + + /* + * Figure the timeout to send the above number of bits. + * Add .02 seconds of slop + */ + port->timeout = (HZ * bits) / baud + HZ/50; +} + +EXPORT_SYMBOL(uart_update_timeout); + +/** + * uart_get_baud_rate - return baud rate for a particular port + * @port: uart_port structure describing the port in question. + * @termios: desired termios settings. + * @old: old termios (or NULL) + * @min: minimum acceptable baud rate + * @max: maximum acceptable baud rate + * + * Decode the termios structure into a numeric baud rate, + * taking account of the magic 38400 baud rate (with spd_* + * flags), and mapping the %B0 rate to 9600 baud. + * + * If the new baud rate is invalid, try the old termios setting. + * If it's still invalid, we try 9600 baud. + * + * Update the @termios structure to reflect the baud rate + * we're actually going to be using. Don't do this for the case + * where B0 is requested ("hang up"). + */ +unsigned int +uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, + struct ktermios *old, unsigned int min, unsigned int max) +{ + unsigned int try, baud, altbaud = 38400; + int hung_up = 0; + upf_t flags = port->flags & UPF_SPD_MASK; + + if (flags == UPF_SPD_HI) + altbaud = 57600; + else if (flags == UPF_SPD_VHI) + altbaud = 115200; + else if (flags == UPF_SPD_SHI) + altbaud = 230400; + else if (flags == UPF_SPD_WARP) + altbaud = 460800; + + for (try = 0; try < 2; try++) { + baud = tty_termios_baud_rate(termios); + + /* + * The spd_hi, spd_vhi, spd_shi, spd_warp kludge... + * Die! Die! Die! + */ + if (baud == 38400) + baud = altbaud; + + /* + * Special case: B0 rate. + */ + if (baud == 0) { + hung_up = 1; + baud = 9600; + } + + if (baud >= min && baud <= max) + return baud; + + /* + * Oops, the quotient was zero. Try again with + * the old baud rate if possible. + */ + termios->c_cflag &= ~CBAUD; + if (old) { + baud = tty_termios_baud_rate(old); + if (!hung_up) + tty_termios_encode_baud_rate(termios, + baud, baud); + old = NULL; + continue; + } + + /* + * As a last resort, if the range cannot be met then clip to + * the nearest chip supported rate. + */ + if (!hung_up) { + if (baud <= min) + tty_termios_encode_baud_rate(termios, + min + 1, min + 1); + else + tty_termios_encode_baud_rate(termios, + max - 1, max - 1); + } + } + /* Should never happen */ + WARN_ON(1); + return 0; +} + +EXPORT_SYMBOL(uart_get_baud_rate); + +/** + * uart_get_divisor - return uart clock divisor + * @port: uart_port structure describing the port. + * @baud: desired baud rate + * + * Calculate the uart clock divisor for the port. + */ +unsigned int +uart_get_divisor(struct uart_port *port, unsigned int baud) +{ + unsigned int quot; + + /* + * Old custom speed handling. + */ + if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) + quot = port->custom_divisor; + else + quot = (port->uartclk + (8 * baud)) / (16 * baud); + + return quot; +} + +EXPORT_SYMBOL(uart_get_divisor); + +/* FIXME: Consistent locking policy */ +static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, + struct ktermios *old_termios) +{ + struct tty_port *port = &state->port; + struct uart_port *uport = state->uart_port; + struct ktermios *termios; + + /* + * If we have no tty, termios, or the port does not exist, + * then we can't set the parameters for this port. + */ + if (!tty || !tty->termios || uport->type == PORT_UNKNOWN) + return; + + termios = tty->termios; + + /* + * Set flags based on termios cflag + */ + if (termios->c_cflag & CRTSCTS) + set_bit(ASYNCB_CTS_FLOW, &port->flags); + else + clear_bit(ASYNCB_CTS_FLOW, &port->flags); + + if (termios->c_cflag & CLOCAL) + clear_bit(ASYNCB_CHECK_CD, &port->flags); + else + set_bit(ASYNCB_CHECK_CD, &port->flags); + + uport->ops->set_termios(uport, termios, old_termios); +} + +static inline int __uart_put_char(struct uart_port *port, + struct circ_buf *circ, unsigned char c) +{ + unsigned long flags; + int ret = 0; + + if (!circ->buf) + return 0; + + spin_lock_irqsave(&port->lock, flags); + if (uart_circ_chars_free(circ) != 0) { + circ->buf[circ->head] = c; + circ->head = (circ->head + 1) & (UART_XMIT_SIZE - 1); + ret = 1; + } + spin_unlock_irqrestore(&port->lock, flags); + return ret; +} + +static int uart_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct uart_state *state = tty->driver_data; + + return __uart_put_char(state->uart_port, &state->xmit, ch); +} + +static void uart_flush_chars(struct tty_struct *tty) +{ + uart_start(tty); +} + +static int uart_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port; + struct circ_buf *circ; + unsigned long flags; + int c, ret = 0; + + /* + * This means you called this function _after_ the port was + * closed. No cookie for you. + */ + if (!state) { + WARN_ON(1); + return -EL3HLT; + } + + port = state->uart_port; + circ = &state->xmit; + + if (!circ->buf) + return 0; + + spin_lock_irqsave(&port->lock, flags); + while (1) { + c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE); + if (count < c) + c = count; + if (c <= 0) + break; + memcpy(circ->buf + circ->head, buf, c); + circ->head = (circ->head + c) & (UART_XMIT_SIZE - 1); + buf += c; + count -= c; + ret += c; + } + spin_unlock_irqrestore(&port->lock, flags); + + uart_start(tty); + return ret; +} + +static int uart_write_room(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + unsigned long flags; + int ret; + + spin_lock_irqsave(&state->uart_port->lock, flags); + ret = uart_circ_chars_free(&state->xmit); + spin_unlock_irqrestore(&state->uart_port->lock, flags); + return ret; +} + +static int uart_chars_in_buffer(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + unsigned long flags; + int ret; + + spin_lock_irqsave(&state->uart_port->lock, flags); + ret = uart_circ_chars_pending(&state->xmit); + spin_unlock_irqrestore(&state->uart_port->lock, flags); + return ret; +} + +static void uart_flush_buffer(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port; + unsigned long flags; + + /* + * This means you called this function _after_ the port was + * closed. No cookie for you. + */ + if (!state) { + WARN_ON(1); + return; + } + + port = state->uart_port; + pr_debug("uart_flush_buffer(%d) called\n", tty->index); + + spin_lock_irqsave(&port->lock, flags); + uart_circ_clear(&state->xmit); + if (port->ops->flush_buffer) + port->ops->flush_buffer(port); + spin_unlock_irqrestore(&port->lock, flags); + tty_wakeup(tty); +} + +/* + * This function is used to send a high-priority XON/XOFF character to + * the device + */ +static void uart_send_xchar(struct tty_struct *tty, char ch) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->uart_port; + unsigned long flags; + + if (port->ops->send_xchar) + port->ops->send_xchar(port, ch); + else { + port->x_char = ch; + if (ch) { + spin_lock_irqsave(&port->lock, flags); + port->ops->start_tx(port); + spin_unlock_irqrestore(&port->lock, flags); + } + } +} + +static void uart_throttle(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + + if (I_IXOFF(tty)) + uart_send_xchar(tty, STOP_CHAR(tty)); + + if (tty->termios->c_cflag & CRTSCTS) + uart_clear_mctrl(state->uart_port, TIOCM_RTS); +} + +static void uart_unthrottle(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->uart_port; + + if (I_IXOFF(tty)) { + if (port->x_char) + port->x_char = 0; + else + uart_send_xchar(tty, START_CHAR(tty)); + } + + if (tty->termios->c_cflag & CRTSCTS) + uart_set_mctrl(port, TIOCM_RTS); +} + +static int uart_get_info(struct uart_state *state, + struct serial_struct __user *retinfo) +{ + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; + struct serial_struct tmp; + + memset(&tmp, 0, sizeof(tmp)); + + /* Ensure the state we copy is consistent and no hardware changes + occur as we go */ + mutex_lock(&port->mutex); + + tmp.type = uport->type; + tmp.line = uport->line; + tmp.port = uport->iobase; + if (HIGH_BITS_OFFSET) + tmp.port_high = (long) uport->iobase >> HIGH_BITS_OFFSET; + tmp.irq = uport->irq; + tmp.flags = uport->flags; + tmp.xmit_fifo_size = uport->fifosize; + tmp.baud_base = uport->uartclk / 16; + tmp.close_delay = port->close_delay / 10; + tmp.closing_wait = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ? + ASYNC_CLOSING_WAIT_NONE : + port->closing_wait / 10; + tmp.custom_divisor = uport->custom_divisor; + tmp.hub6 = uport->hub6; + tmp.io_type = uport->iotype; + tmp.iomem_reg_shift = uport->regshift; + tmp.iomem_base = (void *)(unsigned long)uport->mapbase; + + mutex_unlock(&port->mutex); + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int uart_set_info(struct tty_struct *tty, struct uart_state *state, + struct serial_struct __user *newinfo) +{ + struct serial_struct new_serial; + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; + unsigned long new_port; + unsigned int change_irq, change_port, closing_wait; + unsigned int old_custom_divisor, close_delay; + upf_t old_flags, new_flags; + int retval = 0; + + if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) + return -EFAULT; + + new_port = new_serial.port; + if (HIGH_BITS_OFFSET) + new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET; + + new_serial.irq = irq_canonicalize(new_serial.irq); + close_delay = new_serial.close_delay * 10; + closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ? + ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10; + + /* + * This semaphore protects port->count. It is also + * very useful to prevent opens. Also, take the + * port configuration semaphore to make sure that a + * module insertion/removal doesn't change anything + * under us. + */ + mutex_lock(&port->mutex); + + change_irq = !(uport->flags & UPF_FIXED_PORT) + && new_serial.irq != uport->irq; + + /* + * Since changing the 'type' of the port changes its resource + * allocations, we should treat type changes the same as + * IO port changes. + */ + change_port = !(uport->flags & UPF_FIXED_PORT) + && (new_port != uport->iobase || + (unsigned long)new_serial.iomem_base != uport->mapbase || + new_serial.hub6 != uport->hub6 || + new_serial.io_type != uport->iotype || + new_serial.iomem_reg_shift != uport->regshift || + new_serial.type != uport->type); + + old_flags = uport->flags; + new_flags = new_serial.flags; + old_custom_divisor = uport->custom_divisor; + + if (!capable(CAP_SYS_ADMIN)) { + retval = -EPERM; + if (change_irq || change_port || + (new_serial.baud_base != uport->uartclk / 16) || + (close_delay != port->close_delay) || + (closing_wait != port->closing_wait) || + (new_serial.xmit_fifo_size && + new_serial.xmit_fifo_size != uport->fifosize) || + (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0)) + goto exit; + uport->flags = ((uport->flags & ~UPF_USR_MASK) | + (new_flags & UPF_USR_MASK)); + uport->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + /* + * Ask the low level driver to verify the settings. + */ + if (uport->ops->verify_port) + retval = uport->ops->verify_port(uport, &new_serial); + + if ((new_serial.irq >= nr_irqs) || (new_serial.irq < 0) || + (new_serial.baud_base < 9600)) + retval = -EINVAL; + + if (retval) + goto exit; + + if (change_port || change_irq) { + retval = -EBUSY; + + /* + * Make sure that we are the sole user of this port. + */ + if (tty_port_users(port) > 1) + goto exit; + + /* + * We need to shutdown the serial port at the old + * port/type/irq combination. + */ + uart_shutdown(tty, state); + } + + if (change_port) { + unsigned long old_iobase, old_mapbase; + unsigned int old_type, old_iotype, old_hub6, old_shift; + + old_iobase = uport->iobase; + old_mapbase = uport->mapbase; + old_type = uport->type; + old_hub6 = uport->hub6; + old_iotype = uport->iotype; + old_shift = uport->regshift; + + /* + * Free and release old regions + */ + if (old_type != PORT_UNKNOWN) + uport->ops->release_port(uport); + + uport->iobase = new_port; + uport->type = new_serial.type; + uport->hub6 = new_serial.hub6; + uport->iotype = new_serial.io_type; + uport->regshift = new_serial.iomem_reg_shift; + uport->mapbase = (unsigned long)new_serial.iomem_base; + + /* + * Claim and map the new regions + */ + if (uport->type != PORT_UNKNOWN) { + retval = uport->ops->request_port(uport); + } else { + /* Always success - Jean II */ + retval = 0; + } + + /* + * If we fail to request resources for the + * new port, try to restore the old settings. + */ + if (retval && old_type != PORT_UNKNOWN) { + uport->iobase = old_iobase; + uport->type = old_type; + uport->hub6 = old_hub6; + uport->iotype = old_iotype; + uport->regshift = old_shift; + uport->mapbase = old_mapbase; + retval = uport->ops->request_port(uport); + /* + * If we failed to restore the old settings, + * we fail like this. + */ + if (retval) + uport->type = PORT_UNKNOWN; + + /* + * We failed anyway. + */ + retval = -EBUSY; + /* Added to return the correct error -Ram Gupta */ + goto exit; + } + } + + if (change_irq) + uport->irq = new_serial.irq; + if (!(uport->flags & UPF_FIXED_PORT)) + uport->uartclk = new_serial.baud_base * 16; + uport->flags = (uport->flags & ~UPF_CHANGE_MASK) | + (new_flags & UPF_CHANGE_MASK); + uport->custom_divisor = new_serial.custom_divisor; + port->close_delay = close_delay; + port->closing_wait = closing_wait; + if (new_serial.xmit_fifo_size) + uport->fifosize = new_serial.xmit_fifo_size; + if (port->tty) + port->tty->low_latency = + (uport->flags & UPF_LOW_LATENCY) ? 1 : 0; + + check_and_exit: + retval = 0; + if (uport->type == PORT_UNKNOWN) + goto exit; + if (port->flags & ASYNC_INITIALIZED) { + if (((old_flags ^ uport->flags) & UPF_SPD_MASK) || + old_custom_divisor != uport->custom_divisor) { + /* + * If they're setting up a custom divisor or speed, + * instead of clearing it, then bitch about it. No + * need to rate-limit; it's CAP_SYS_ADMIN only. + */ + if (uport->flags & UPF_SPD_MASK) { + char buf[64]; + printk(KERN_NOTICE + "%s sets custom speed on %s. This " + "is deprecated.\n", current->comm, + tty_name(port->tty, buf)); + } + uart_change_speed(tty, state, NULL); + } + } else + retval = uart_startup(tty, state, 1); + exit: + mutex_unlock(&port->mutex); + return retval; +} + +/** + * uart_get_lsr_info - get line status register info + * @tty: tty associated with the UART + * @state: UART being queried + * @value: returned modem value + * + * Note: uart_ioctl protects us against hangups. + */ +static int uart_get_lsr_info(struct tty_struct *tty, + struct uart_state *state, unsigned int __user *value) +{ + struct uart_port *uport = state->uart_port; + unsigned int result; + + result = uport->ops->tx_empty(uport); + + /* + * If we're about to load something into the transmit + * register, we'll pretend the transmitter isn't empty to + * avoid a race condition (depending on when the transmit + * interrupt happens). + */ + if (uport->x_char || + ((uart_circ_chars_pending(&state->xmit) > 0) && + !tty->stopped && !tty->hw_stopped)) + result &= ~TIOCSER_TEMT; + + return put_user(result, value); +} + +static int uart_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port = &state->port; + struct uart_port *uport = state->uart_port; + int result = -EIO; + + mutex_lock(&port->mutex); + if ((!file || !tty_hung_up_p(file)) && + !(tty->flags & (1 << TTY_IO_ERROR))) { + result = uport->mctrl; + + spin_lock_irq(&uport->lock); + result |= uport->ops->get_mctrl(uport); + spin_unlock_irq(&uport->lock); + } + mutex_unlock(&port->mutex); + + return result; +} + +static int +uart_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; + int ret = -EIO; + + mutex_lock(&port->mutex); + if ((!file || !tty_hung_up_p(file)) && + !(tty->flags & (1 << TTY_IO_ERROR))) { + uart_update_mctrl(uport, set, clear); + ret = 0; + } + mutex_unlock(&port->mutex); + return ret; +} + +static int uart_break_ctl(struct tty_struct *tty, int break_state) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port = &state->port; + struct uart_port *uport = state->uart_port; + + mutex_lock(&port->mutex); + + if (uport->type != PORT_UNKNOWN) + uport->ops->break_ctl(uport, break_state); + + mutex_unlock(&port->mutex); + return 0; +} + +static int uart_do_autoconfig(struct tty_struct *tty,struct uart_state *state) +{ + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; + int flags, ret; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + /* + * Take the per-port semaphore. This prevents count from + * changing, and hence any extra opens of the port while + * we're auto-configuring. + */ + if (mutex_lock_interruptible(&port->mutex)) + return -ERESTARTSYS; + + ret = -EBUSY; + if (tty_port_users(port) == 1) { + uart_shutdown(tty, state); + + /* + * If we already have a port type configured, + * we must release its resources. + */ + if (uport->type != PORT_UNKNOWN) + uport->ops->release_port(uport); + + flags = UART_CONFIG_TYPE; + if (uport->flags & UPF_AUTO_IRQ) + flags |= UART_CONFIG_IRQ; + + /* + * This will claim the ports resources if + * a port is found. + */ + uport->ops->config_port(uport, flags); + + ret = uart_startup(tty, state, 1); + } + mutex_unlock(&port->mutex); + return ret; +} + +/* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + * + * FIXME: This wants extracting into a common all driver implementation + * of TIOCMWAIT using tty_port. + */ +static int +uart_wait_modem_status(struct uart_state *state, unsigned long arg) +{ + struct uart_port *uport = state->uart_port; + struct tty_port *port = &state->port; + DECLARE_WAITQUEUE(wait, current); + struct uart_icount cprev, cnow; + int ret; + + /* + * note the counters on entry + */ + spin_lock_irq(&uport->lock); + memcpy(&cprev, &uport->icount, sizeof(struct uart_icount)); + + /* + * Force modem status interrupts on + */ + uport->ops->enable_ms(uport); + spin_unlock_irq(&uport->lock); + + add_wait_queue(&port->delta_msr_wait, &wait); + for (;;) { + spin_lock_irq(&uport->lock); + memcpy(&cnow, &uport->icount, sizeof(struct uart_icount)); + spin_unlock_irq(&uport->lock); + + set_current_state(TASK_INTERRUPTIBLE); + + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { + ret = 0; + break; + } + + schedule(); + + /* see if a signal did it */ + if (signal_pending(current)) { + ret = -ERESTARTSYS; + break; + } + + cprev = cnow; + } + + current->state = TASK_RUNNING; + remove_wait_queue(&port->delta_msr_wait, &wait); + + return ret; +} + +/* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ +static int uart_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct uart_state *state = tty->driver_data; + struct uart_icount cnow; + struct uart_port *uport = state->uart_port; + + spin_lock_irq(&uport->lock); + memcpy(&cnow, &uport->icount, sizeof(struct uart_icount)); + spin_unlock_irq(&uport->lock); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->frame = cnow.frame; + icount->overrun = cnow.overrun; + icount->parity = cnow.parity; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} + +/* + * Called via sys_ioctl. We can use spin_lock_irq() here. + */ +static int +uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port = &state->port; + void __user *uarg = (void __user *)arg; + int ret = -ENOIOCTLCMD; + + + /* + * These ioctls don't rely on the hardware to be present. + */ + switch (cmd) { + case TIOCGSERIAL: + ret = uart_get_info(state, uarg); + break; + + case TIOCSSERIAL: + ret = uart_set_info(tty, state, uarg); + break; + + case TIOCSERCONFIG: + ret = uart_do_autoconfig(tty, state); + break; + + case TIOCSERGWILD: /* obsolete */ + case TIOCSERSWILD: /* obsolete */ + ret = 0; + break; + } + + if (ret != -ENOIOCTLCMD) + goto out; + + if (tty->flags & (1 << TTY_IO_ERROR)) { + ret = -EIO; + goto out; + } + + /* + * The following should only be used when hardware is present. + */ + switch (cmd) { + case TIOCMIWAIT: + ret = uart_wait_modem_status(state, arg); + break; + } + + if (ret != -ENOIOCTLCMD) + goto out; + + mutex_lock(&port->mutex); + + if (tty_hung_up_p(filp)) { + ret = -EIO; + goto out_up; + } + + /* + * All these rely on hardware being present and need to be + * protected against the tty being hung up. + */ + switch (cmd) { + case TIOCSERGETLSR: /* Get line status register */ + ret = uart_get_lsr_info(tty, state, uarg); + break; + + default: { + struct uart_port *uport = state->uart_port; + if (uport->ops->ioctl) + ret = uport->ops->ioctl(uport, cmd, arg); + break; + } + } +out_up: + mutex_unlock(&port->mutex); +out: + return ret; +} + +static void uart_set_ldisc(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *uport = state->uart_port; + + if (uport->ops->set_ldisc) + uport->ops->set_ldisc(uport, tty->termios->c_line); +} + +static void uart_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct uart_state *state = tty->driver_data; + unsigned long flags; + unsigned int cflag = tty->termios->c_cflag; + + + /* + * These are the bits that are used to setup various + * flags in the low level driver. We can ignore the Bfoo + * bits in c_cflag; c_[io]speed will always be set + * appropriately by set_termios() in tty_ioctl.c + */ +#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + if ((cflag ^ old_termios->c_cflag) == 0 && + tty->termios->c_ospeed == old_termios->c_ospeed && + tty->termios->c_ispeed == old_termios->c_ispeed && + RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0) { + return; + } + + uart_change_speed(tty, state, old_termios); + + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) + uart_clear_mctrl(state->uart_port, TIOCM_RTS | TIOCM_DTR); + /* Handle transition away from B0 status */ + else if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { + unsigned int mask = TIOCM_DTR; + if (!(cflag & CRTSCTS) || + !test_bit(TTY_THROTTLED, &tty->flags)) + mask |= TIOCM_RTS; + uart_set_mctrl(state->uart_port, mask); + } + + /* Handle turning off CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) { + spin_lock_irqsave(&state->uart_port->lock, flags); + tty->hw_stopped = 0; + __uart_start(tty); + spin_unlock_irqrestore(&state->uart_port->lock, flags); + } + /* Handle turning on CRTSCTS */ + else if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) { + spin_lock_irqsave(&state->uart_port->lock, flags); + if (!(state->uart_port->ops->get_mctrl(state->uart_port) & TIOCM_CTS)) { + tty->hw_stopped = 1; + state->uart_port->ops->stop_tx(state->uart_port); + } + spin_unlock_irqrestore(&state->uart_port->lock, flags); + } +#if 0 + /* + * No need to wake up processes in open wait, since they + * sample the CLOCAL flag once, and don't recheck it. + * XXX It's not clear whether the current behavior is correct + * or not. Hence, this may change..... + */ + if (!(old_termios->c_cflag & CLOCAL) && + (tty->termios->c_cflag & CLOCAL)) + wake_up_interruptible(&state->uart_port.open_wait); +#endif +} + +/* + * In 2.4.5, calls to this will be serialized via the BKL in + * linux/drivers/char/tty_io.c:tty_release() + * linux/drivers/char/tty_io.c:do_tty_handup() + */ +static void uart_close(struct tty_struct *tty, struct file *filp) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port; + struct uart_port *uport; + unsigned long flags; + + BUG_ON(!tty_locked()); + + if (!state) + return; + + uport = state->uart_port; + port = &state->port; + + pr_debug("uart_close(%d) called\n", uport->line); + + mutex_lock(&port->mutex); + spin_lock_irqsave(&port->lock, flags); + + if (tty_hung_up_p(filp)) { + spin_unlock_irqrestore(&port->lock, flags); + goto done; + } + + if ((tty->count == 1) && (port->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. port->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk(KERN_ERR "uart_close: bad serial port count; tty->count is 1, " + "port->count is %d\n", port->count); + port->count = 1; + } + if (--port->count < 0) { + printk(KERN_ERR "uart_close: bad serial port count for %s: %d\n", + tty->name, port->count); + port->count = 0; + } + if (port->count) { + spin_unlock_irqrestore(&port->lock, flags); + goto done; + } + + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters by + * setting tty->closing. + */ + tty->closing = 1; + spin_unlock_irqrestore(&port->lock, flags); + + if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) { + /* + * hack: open-coded tty_wait_until_sent to avoid + * recursive tty_lock + */ + long timeout = msecs_to_jiffies(port->closing_wait); + if (wait_event_interruptible_timeout(tty->write_wait, + !tty_chars_in_buffer(tty), timeout) >= 0) + __uart_wait_until_sent(uport, timeout); + } + + /* + * At this point, we stop accepting input. To do this, we + * disable the receive line status interrupts. + */ + if (port->flags & ASYNC_INITIALIZED) { + unsigned long flags; + spin_lock_irqsave(&uport->lock, flags); + uport->ops->stop_rx(uport); + spin_unlock_irqrestore(&uport->lock, flags); + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + __uart_wait_until_sent(uport, uport->timeout); + } + + uart_shutdown(tty, state); + uart_flush_buffer(tty); + + tty_ldisc_flush(tty); + + tty_port_tty_set(port, NULL); + spin_lock_irqsave(&port->lock, flags); + tty->closing = 0; + + if (port->blocked_open) { + spin_unlock_irqrestore(&port->lock, flags); + if (port->close_delay) + msleep_interruptible(port->close_delay); + spin_lock_irqsave(&port->lock, flags); + } else if (!uart_console(uport)) { + spin_unlock_irqrestore(&port->lock, flags); + uart_change_pm(state, 3); + spin_lock_irqsave(&port->lock, flags); + } + + /* + * Wake up anyone trying to open this port. + */ + clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); + spin_unlock_irqrestore(&port->lock, flags); + wake_up_interruptible(&port->open_wait); + +done: + mutex_unlock(&port->mutex); +} + +static void __uart_wait_until_sent(struct uart_port *port, int timeout) +{ + unsigned long char_time, expire; + + if (port->type == PORT_UNKNOWN || port->fifosize == 0) + return; + + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + char_time = (port->timeout - HZ/50) / port->fifosize; + char_time = char_time / 5; + if (char_time == 0) + char_time = 1; + if (timeout && timeout < char_time) + char_time = timeout; + + /* + * If the transmitter hasn't cleared in twice the approximate + * amount of time to send the entire FIFO, it probably won't + * ever clear. This assumes the UART isn't doing flow + * control, which is currently the case. Hence, if it ever + * takes longer than port->timeout, this is probably due to a + * UART bug of some kind. So, we clamp the timeout parameter at + * 2*port->timeout. + */ + if (timeout == 0 || timeout > 2 * port->timeout) + timeout = 2 * port->timeout; + + expire = jiffies + timeout; + + pr_debug("uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\n", + port->line, jiffies, expire); + + /* + * Check whether the transmitter is empty every 'char_time'. + * 'timeout' / 'expire' give us the maximum amount of time + * we wait. + */ + while (!port->ops->tx_empty(port)) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (time_after(jiffies, expire)) + break; + } + set_current_state(TASK_RUNNING); /* might not be needed */ +} + +static void uart_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->uart_port; + + tty_lock(); + __uart_wait_until_sent(port, timeout); + tty_unlock(); +} + +/* + * This is called with the BKL held in + * linux/drivers/char/tty_io.c:do_tty_hangup() + * We're called from the eventd thread, so we can sleep for + * a _short_ time only. + */ +static void uart_hangup(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct tty_port *port = &state->port; + unsigned long flags; + + BUG_ON(!tty_locked()); + pr_debug("uart_hangup(%d)\n", state->uart_port->line); + + mutex_lock(&port->mutex); + if (port->flags & ASYNC_NORMAL_ACTIVE) { + uart_flush_buffer(tty); + uart_shutdown(tty, state); + spin_lock_irqsave(&port->lock, flags); + port->count = 0; + clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); + spin_unlock_irqrestore(&port->lock, flags); + tty_port_tty_set(port, NULL); + wake_up_interruptible(&port->open_wait); + wake_up_interruptible(&port->delta_msr_wait); + } + mutex_unlock(&port->mutex); +} + +/** + * uart_update_termios - update the terminal hw settings + * @tty: tty associated with UART + * @state: UART to update + * + * Copy across the serial console cflag setting into the termios settings + * for the initial open of the port. This allows continuity between the + * kernel settings, and the settings init adopts when it opens the port + * for the first time. + */ +static void uart_update_termios(struct tty_struct *tty, + struct uart_state *state) +{ + struct uart_port *port = state->uart_port; + + if (uart_console(port) && port->cons->cflag) { + tty->termios->c_cflag = port->cons->cflag; + port->cons->cflag = 0; + } + + /* + * If the device failed to grab its irq resources, + * or some other error occurred, don't try to talk + * to the port hardware. + */ + if (!(tty->flags & (1 << TTY_IO_ERROR))) { + /* + * Make termios settings take effect. + */ + uart_change_speed(tty, state, NULL); + + /* + * And finally enable the RTS and DTR signals. + */ + if (tty->termios->c_cflag & CBAUD) + uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS); + } +} + +static int uart_carrier_raised(struct tty_port *port) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = state->uart_port; + int mctrl; + spin_lock_irq(&uport->lock); + uport->ops->enable_ms(uport); + mctrl = uport->ops->get_mctrl(uport); + spin_unlock_irq(&uport->lock); + if (mctrl & TIOCM_CAR) + return 1; + return 0; +} + +static void uart_dtr_rts(struct tty_port *port, int onoff) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = state->uart_port; + + if (onoff) { + uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS); + + /* + * If this is the first open to succeed, + * adjust things to suit. + */ + if (!test_and_set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags)) + uart_update_termios(port->tty, state); + } + else + uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); +} + +static struct uart_state *uart_get(struct uart_driver *drv, int line) +{ + struct uart_state *state; + struct tty_port *port; + int ret = 0; + + state = drv->state + line; + port = &state->port; + if (mutex_lock_interruptible(&port->mutex)) { + ret = -ERESTARTSYS; + goto err; + } + + port->count++; + if (!state->uart_port || state->uart_port->flags & UPF_DEAD) { + ret = -ENXIO; + goto err_unlock; + } + return state; + + err_unlock: + port->count--; + mutex_unlock(&port->mutex); + err: + return ERR_PTR(ret); +} + +/* + * calls to uart_open are serialised by the BKL in + * fs/char_dev.c:chrdev_open() + * Note that if this fails, then uart_close() _will_ be called. + * + * In time, we want to scrap the "opening nonpresent ports" + * behaviour and implement an alternative way for setserial + * to set base addresses/ports/types. This will allow us to + * get rid of a certain amount of extra tests. + */ +static int uart_open(struct tty_struct *tty, struct file *filp) +{ + struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state; + struct uart_state *state; + struct tty_port *port; + int retval, line = tty->index; + + BUG_ON(!tty_locked()); + pr_debug("uart_open(%d) called\n", line); + + /* + * tty->driver->num won't change, so we won't fail here with + * tty->driver_data set to something non-NULL (and therefore + * we won't get caught by uart_close()). + */ + retval = -ENODEV; + if (line >= tty->driver->num) + goto fail; + + /* + * We take the semaphore inside uart_get to guarantee that we won't + * be re-entered while allocating the state structure, or while we + * request any IRQs that the driver may need. This also has the nice + * side-effect that it delays the action of uart_hangup, so we can + * guarantee that state->port.tty will always contain something + * reasonable. + */ + state = uart_get(drv, line); + if (IS_ERR(state)) { + retval = PTR_ERR(state); + goto fail; + } + port = &state->port; + + /* + * Once we set tty->driver_data here, we are guaranteed that + * uart_close() will decrement the driver module use count. + * Any failures from here onwards should not touch the count. + */ + tty->driver_data = state; + state->uart_port->state = state; + tty->low_latency = (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0; + tty->alt_speed = 0; + tty_port_tty_set(port, tty); + + /* + * If the port is in the middle of closing, bail out now. + */ + if (tty_hung_up_p(filp)) { + retval = -EAGAIN; + port->count--; + mutex_unlock(&port->mutex); + goto fail; + } + + /* + * Make sure the device is in D0 state. + */ + if (port->count == 1) + uart_change_pm(state, 0); + + /* + * Start up the serial port. + */ + retval = uart_startup(tty, state, 0); + + /* + * If we succeeded, wait until the port is ready. + */ + mutex_unlock(&port->mutex); + if (retval == 0) + retval = tty_port_block_til_ready(port, tty, filp); + +fail: + return retval; +} + +static const char *uart_type(struct uart_port *port) +{ + const char *str = NULL; + + if (port->ops->type) + str = port->ops->type(port); + + if (!str) + str = "unknown"; + + return str; +} + +#ifdef CONFIG_PROC_FS + +static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i) +{ + struct uart_state *state = drv->state + i; + struct tty_port *port = &state->port; + int pm_state; + struct uart_port *uport = state->uart_port; + char stat_buf[32]; + unsigned int status; + int mmio; + + if (!uport) + return; + + mmio = uport->iotype >= UPIO_MEM; + seq_printf(m, "%d: uart:%s %s%08llX irq:%d", + uport->line, uart_type(uport), + mmio ? "mmio:0x" : "port:", + mmio ? (unsigned long long)uport->mapbase + : (unsigned long long)uport->iobase, + uport->irq); + + if (uport->type == PORT_UNKNOWN) { + seq_putc(m, '\n'); + return; + } + + if (capable(CAP_SYS_ADMIN)) { + mutex_lock(&port->mutex); + pm_state = state->pm_state; + if (pm_state) + uart_change_pm(state, 0); + spin_lock_irq(&uport->lock); + status = uport->ops->get_mctrl(uport); + spin_unlock_irq(&uport->lock); + if (pm_state) + uart_change_pm(state, pm_state); + mutex_unlock(&port->mutex); + + seq_printf(m, " tx:%d rx:%d", + uport->icount.tx, uport->icount.rx); + if (uport->icount.frame) + seq_printf(m, " fe:%d", + uport->icount.frame); + if (uport->icount.parity) + seq_printf(m, " pe:%d", + uport->icount.parity); + if (uport->icount.brk) + seq_printf(m, " brk:%d", + uport->icount.brk); + if (uport->icount.overrun) + seq_printf(m, " oe:%d", + uport->icount.overrun); + +#define INFOBIT(bit, str) \ + if (uport->mctrl & (bit)) \ + strncat(stat_buf, (str), sizeof(stat_buf) - \ + strlen(stat_buf) - 2) +#define STATBIT(bit, str) \ + if (status & (bit)) \ + strncat(stat_buf, (str), sizeof(stat_buf) - \ + strlen(stat_buf) - 2) + + stat_buf[0] = '\0'; + stat_buf[1] = '\0'; + INFOBIT(TIOCM_RTS, "|RTS"); + STATBIT(TIOCM_CTS, "|CTS"); + INFOBIT(TIOCM_DTR, "|DTR"); + STATBIT(TIOCM_DSR, "|DSR"); + STATBIT(TIOCM_CAR, "|CD"); + STATBIT(TIOCM_RNG, "|RI"); + if (stat_buf[0]) + stat_buf[0] = ' '; + + seq_puts(m, stat_buf); + } + seq_putc(m, '\n'); +#undef STATBIT +#undef INFOBIT +} + +static int uart_proc_show(struct seq_file *m, void *v) +{ + struct tty_driver *ttydrv = m->private; + struct uart_driver *drv = ttydrv->driver_state; + int i; + + seq_printf(m, "serinfo:1.0 driver%s%s revision:%s\n", + "", "", ""); + for (i = 0; i < drv->nr; i++) + uart_line_info(m, drv, i); + return 0; +} + +static int uart_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, uart_proc_show, PDE(inode)->data); +} + +static const struct file_operations uart_proc_fops = { + .owner = THIS_MODULE, + .open = uart_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + +#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL) +/* + * uart_console_write - write a console message to a serial port + * @port: the port to write the message + * @s: array of characters + * @count: number of characters in string to write + * @write: function to write character to port + */ +void uart_console_write(struct uart_port *port, const char *s, + unsigned int count, + void (*putchar)(struct uart_port *, int)) +{ + unsigned int i; + + for (i = 0; i < count; i++, s++) { + if (*s == '\n') + putchar(port, '\r'); + putchar(port, *s); + } +} +EXPORT_SYMBOL_GPL(uart_console_write); + +/* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ +struct uart_port * __init +uart_get_console(struct uart_port *ports, int nr, struct console *co) +{ + int idx = co->index; + + if (idx < 0 || idx >= nr || (ports[idx].iobase == 0 && + ports[idx].membase == NULL)) + for (idx = 0; idx < nr; idx++) + if (ports[idx].iobase != 0 || + ports[idx].membase != NULL) + break; + + co->index = idx; + + return ports + idx; +} + +/** + * uart_parse_options - Parse serial port baud/parity/bits/flow contro. + * @options: pointer to option string + * @baud: pointer to an 'int' variable for the baud rate. + * @parity: pointer to an 'int' variable for the parity. + * @bits: pointer to an 'int' variable for the number of data bits. + * @flow: pointer to an 'int' variable for the flow control character. + * + * uart_parse_options decodes a string containing the serial console + * options. The format of the string is , + * eg: 115200n8r + */ +void +uart_parse_options(char *options, int *baud, int *parity, int *bits, int *flow) +{ + char *s = options; + + *baud = simple_strtoul(s, NULL, 10); + while (*s >= '0' && *s <= '9') + s++; + if (*s) + *parity = *s++; + if (*s) + *bits = *s++ - '0'; + if (*s) + *flow = *s; +} +EXPORT_SYMBOL_GPL(uart_parse_options); + +struct baud_rates { + unsigned int rate; + unsigned int cflag; +}; + +static const struct baud_rates baud_rates[] = { + { 921600, B921600 }, + { 460800, B460800 }, + { 230400, B230400 }, + { 115200, B115200 }, + { 57600, B57600 }, + { 38400, B38400 }, + { 19200, B19200 }, + { 9600, B9600 }, + { 4800, B4800 }, + { 2400, B2400 }, + { 1200, B1200 }, + { 0, B38400 } +}; + +/** + * uart_set_options - setup the serial console parameters + * @port: pointer to the serial ports uart_port structure + * @co: console pointer + * @baud: baud rate + * @parity: parity character - 'n' (none), 'o' (odd), 'e' (even) + * @bits: number of data bits + * @flow: flow control character - 'r' (rts) + */ +int +uart_set_options(struct uart_port *port, struct console *co, + int baud, int parity, int bits, int flow) +{ + struct ktermios termios; + static struct ktermios dummy; + int i; + + /* + * Ensure that the serial console lock is initialised + * early. + */ + spin_lock_init(&port->lock); + lockdep_set_class(&port->lock, &port_lock_key); + + memset(&termios, 0, sizeof(struct ktermios)); + + termios.c_cflag = CREAD | HUPCL | CLOCAL; + + /* + * Construct a cflag setting. + */ + for (i = 0; baud_rates[i].rate; i++) + if (baud_rates[i].rate <= baud) + break; + + termios.c_cflag |= baud_rates[i].cflag; + + if (bits == 7) + termios.c_cflag |= CS7; + else + termios.c_cflag |= CS8; + + switch (parity) { + case 'o': case 'O': + termios.c_cflag |= PARODD; + /*fall through*/ + case 'e': case 'E': + termios.c_cflag |= PARENB; + break; + } + + if (flow == 'r') + termios.c_cflag |= CRTSCTS; + + /* + * some uarts on other side don't support no flow control. + * So we set * DTR in host uart to make them happy + */ + port->mctrl |= TIOCM_DTR; + + port->ops->set_termios(port, &termios, &dummy); + /* + * Allow the setting of the UART parameters with a NULL console + * too: + */ + if (co) + co->cflag = termios.c_cflag; + + return 0; +} +EXPORT_SYMBOL_GPL(uart_set_options); +#endif /* CONFIG_SERIAL_CORE_CONSOLE */ + +static void uart_change_pm(struct uart_state *state, int pm_state) +{ + struct uart_port *port = state->uart_port; + + if (state->pm_state != pm_state) { + if (port->ops->pm) + port->ops->pm(port, pm_state, state->pm_state); + state->pm_state = pm_state; + } +} + +struct uart_match { + struct uart_port *port; + struct uart_driver *driver; +}; + +static int serial_match_port(struct device *dev, void *data) +{ + struct uart_match *match = data; + struct tty_driver *tty_drv = match->driver->tty_driver; + dev_t devt = MKDEV(tty_drv->major, tty_drv->minor_start) + + match->port->line; + + return dev->devt == devt; /* Actually, only one tty per port */ +} + +int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) +{ + struct uart_state *state = drv->state + uport->line; + struct tty_port *port = &state->port; + struct device *tty_dev; + struct uart_match match = {uport, drv}; + struct tty_struct *tty; + + mutex_lock(&port->mutex); + + /* Must be inside the mutex lock until we convert to tty_port */ + tty = port->tty; + + tty_dev = device_find_child(uport->dev, &match, serial_match_port); + if (device_may_wakeup(tty_dev)) { + if (!enable_irq_wake(uport->irq)) + uport->irq_wake = 1; + put_device(tty_dev); + mutex_unlock(&port->mutex); + return 0; + } + if (console_suspend_enabled || !uart_console(uport)) + uport->suspended = 1; + + if (port->flags & ASYNC_INITIALIZED) { + const struct uart_ops *ops = uport->ops; + int tries; + + if (console_suspend_enabled || !uart_console(uport)) { + set_bit(ASYNCB_SUSPENDED, &port->flags); + clear_bit(ASYNCB_INITIALIZED, &port->flags); + + spin_lock_irq(&uport->lock); + ops->stop_tx(uport); + ops->set_mctrl(uport, 0); + ops->stop_rx(uport); + spin_unlock_irq(&uport->lock); + } + + /* + * Wait for the transmitter to empty. + */ + for (tries = 3; !ops->tx_empty(uport) && tries; tries--) + msleep(10); + if (!tries) + printk(KERN_ERR "%s%s%s%d: Unable to drain " + "transmitter\n", + uport->dev ? dev_name(uport->dev) : "", + uport->dev ? ": " : "", + drv->dev_name, + drv->tty_driver->name_base + uport->line); + + if (console_suspend_enabled || !uart_console(uport)) + ops->shutdown(uport); + } + + /* + * Disable the console device before suspending. + */ + if (console_suspend_enabled && uart_console(uport)) + console_stop(uport->cons); + + if (console_suspend_enabled || !uart_console(uport)) + uart_change_pm(state, 3); + + mutex_unlock(&port->mutex); + + return 0; +} + +int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) +{ + struct uart_state *state = drv->state + uport->line; + struct tty_port *port = &state->port; + struct device *tty_dev; + struct uart_match match = {uport, drv}; + struct ktermios termios; + + mutex_lock(&port->mutex); + + tty_dev = device_find_child(uport->dev, &match, serial_match_port); + if (!uport->suspended && device_may_wakeup(tty_dev)) { + if (uport->irq_wake) { + disable_irq_wake(uport->irq); + uport->irq_wake = 0; + } + mutex_unlock(&port->mutex); + return 0; + } + uport->suspended = 0; + + /* + * Re-enable the console device after suspending. + */ + if (console_suspend_enabled && uart_console(uport)) { + /* + * First try to use the console cflag setting. + */ + memset(&termios, 0, sizeof(struct ktermios)); + termios.c_cflag = uport->cons->cflag; + + /* + * If that's unset, use the tty termios setting. + */ + if (port->tty && port->tty->termios && termios.c_cflag == 0) + termios = *(port->tty->termios); + + uart_change_pm(state, 0); + uport->ops->set_termios(uport, &termios, NULL); + console_start(uport->cons); + } + + if (port->flags & ASYNC_SUSPENDED) { + const struct uart_ops *ops = uport->ops; + int ret; + + uart_change_pm(state, 0); + spin_lock_irq(&uport->lock); + ops->set_mctrl(uport, 0); + spin_unlock_irq(&uport->lock); + if (console_suspend_enabled || !uart_console(uport)) { + /* Protected by port mutex for now */ + struct tty_struct *tty = port->tty; + ret = ops->startup(uport); + if (ret == 0) { + if (tty) + uart_change_speed(tty, state, NULL); + spin_lock_irq(&uport->lock); + ops->set_mctrl(uport, uport->mctrl); + ops->start_tx(uport); + spin_unlock_irq(&uport->lock); + set_bit(ASYNCB_INITIALIZED, &port->flags); + } else { + /* + * Failed to resume - maybe hardware went away? + * Clear the "initialized" flag so we won't try + * to call the low level drivers shutdown method. + */ + uart_shutdown(tty, state); + } + } + + clear_bit(ASYNCB_SUSPENDED, &port->flags); + } + + mutex_unlock(&port->mutex); + + return 0; +} + +static inline void +uart_report_port(struct uart_driver *drv, struct uart_port *port) +{ + char address[64]; + + switch (port->iotype) { + case UPIO_PORT: + snprintf(address, sizeof(address), "I/O 0x%lx", port->iobase); + break; + case UPIO_HUB6: + snprintf(address, sizeof(address), + "I/O 0x%lx offset 0x%x", port->iobase, port->hub6); + break; + case UPIO_MEM: + case UPIO_MEM32: + case UPIO_AU: + case UPIO_TSI: + case UPIO_DWAPB: + case UPIO_DWAPB32: + snprintf(address, sizeof(address), + "MMIO 0x%llx", (unsigned long long)port->mapbase); + break; + default: + strlcpy(address, "*unknown*", sizeof(address)); + break; + } + + printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n", + port->dev ? dev_name(port->dev) : "", + port->dev ? ": " : "", + drv->dev_name, + drv->tty_driver->name_base + port->line, + address, port->irq, uart_type(port)); +} + +static void +uart_configure_port(struct uart_driver *drv, struct uart_state *state, + struct uart_port *port) +{ + unsigned int flags; + + /* + * If there isn't a port here, don't do anything further. + */ + if (!port->iobase && !port->mapbase && !port->membase) + return; + + /* + * Now do the auto configuration stuff. Note that config_port + * is expected to claim the resources and map the port for us. + */ + flags = 0; + if (port->flags & UPF_AUTO_IRQ) + flags |= UART_CONFIG_IRQ; + if (port->flags & UPF_BOOT_AUTOCONF) { + if (!(port->flags & UPF_FIXED_TYPE)) { + port->type = PORT_UNKNOWN; + flags |= UART_CONFIG_TYPE; + } + port->ops->config_port(port, flags); + } + + if (port->type != PORT_UNKNOWN) { + unsigned long flags; + + uart_report_port(drv, port); + + /* Power up port for set_mctrl() */ + uart_change_pm(state, 0); + + /* + * Ensure that the modem control lines are de-activated. + * keep the DTR setting that is set in uart_set_options() + * We probably don't need a spinlock around this, but + */ + spin_lock_irqsave(&port->lock, flags); + port->ops->set_mctrl(port, port->mctrl & TIOCM_DTR); + spin_unlock_irqrestore(&port->lock, flags); + + /* + * If this driver supports console, and it hasn't been + * successfully registered yet, try to re-register it. + * It may be that the port was not available. + */ + if (port->cons && !(port->cons->flags & CON_ENABLED)) + register_console(port->cons); + + /* + * Power down all ports by default, except the + * console if we have one. + */ + if (!uart_console(port)) + uart_change_pm(state, 3); + } +} + +#ifdef CONFIG_CONSOLE_POLL + +static int uart_poll_init(struct tty_driver *driver, int line, char *options) +{ + struct uart_driver *drv = driver->driver_state; + struct uart_state *state = drv->state + line; + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (!state || !state->uart_port) + return -1; + + port = state->uart_port; + if (!(port->ops->poll_get_char && port->ops->poll_put_char)) + return -1; + + if (options) { + uart_parse_options(options, &baud, &parity, &bits, &flow); + return uart_set_options(port, NULL, baud, parity, bits, flow); + } + + return 0; +} + +static int uart_poll_get_char(struct tty_driver *driver, int line) +{ + struct uart_driver *drv = driver->driver_state; + struct uart_state *state = drv->state + line; + struct uart_port *port; + + if (!state || !state->uart_port) + return -1; + + port = state->uart_port; + return port->ops->poll_get_char(port); +} + +static void uart_poll_put_char(struct tty_driver *driver, int line, char ch) +{ + struct uart_driver *drv = driver->driver_state; + struct uart_state *state = drv->state + line; + struct uart_port *port; + + if (!state || !state->uart_port) + return; + + port = state->uart_port; + port->ops->poll_put_char(port, ch); +} +#endif + +static const struct tty_operations uart_ops = { + .open = uart_open, + .close = uart_close, + .write = uart_write, + .put_char = uart_put_char, + .flush_chars = uart_flush_chars, + .write_room = uart_write_room, + .chars_in_buffer= uart_chars_in_buffer, + .flush_buffer = uart_flush_buffer, + .ioctl = uart_ioctl, + .throttle = uart_throttle, + .unthrottle = uart_unthrottle, + .send_xchar = uart_send_xchar, + .set_termios = uart_set_termios, + .set_ldisc = uart_set_ldisc, + .stop = uart_stop, + .start = uart_start, + .hangup = uart_hangup, + .break_ctl = uart_break_ctl, + .wait_until_sent= uart_wait_until_sent, +#ifdef CONFIG_PROC_FS + .proc_fops = &uart_proc_fops, +#endif + .tiocmget = uart_tiocmget, + .tiocmset = uart_tiocmset, + .get_icount = uart_get_icount, +#ifdef CONFIG_CONSOLE_POLL + .poll_init = uart_poll_init, + .poll_get_char = uart_poll_get_char, + .poll_put_char = uart_poll_put_char, +#endif +}; + +static const struct tty_port_operations uart_port_ops = { + .carrier_raised = uart_carrier_raised, + .dtr_rts = uart_dtr_rts, +}; + +/** + * uart_register_driver - register a driver with the uart core layer + * @drv: low level driver structure + * + * Register a uart driver with the core driver. We in turn register + * with the tty layer, and initialise the core driver per-port state. + * + * We have a proc file in /proc/tty/driver which is named after the + * normal driver. + * + * drv->port should be NULL, and the per-port structures should be + * registered using uart_add_one_port after this call has succeeded. + */ +int uart_register_driver(struct uart_driver *drv) +{ + struct tty_driver *normal; + int i, retval; + + BUG_ON(drv->state); + + /* + * Maybe we should be using a slab cache for this, especially if + * we have a large number of ports to handle. + */ + drv->state = kzalloc(sizeof(struct uart_state) * drv->nr, GFP_KERNEL); + if (!drv->state) + goto out; + + normal = alloc_tty_driver(drv->nr); + if (!normal) + goto out_kfree; + + drv->tty_driver = normal; + + normal->owner = drv->owner; + normal->driver_name = drv->driver_name; + normal->name = drv->dev_name; + normal->major = drv->major; + normal->minor_start = drv->minor; + normal->type = TTY_DRIVER_TYPE_SERIAL; + normal->subtype = SERIAL_TYPE_NORMAL; + normal->init_termios = tty_std_termios; + normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + normal->init_termios.c_ispeed = normal->init_termios.c_ospeed = 9600; + normal->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + normal->driver_state = drv; + tty_set_operations(normal, &uart_ops); + + /* + * Initialise the UART state(s). + */ + for (i = 0; i < drv->nr; i++) { + struct uart_state *state = drv->state + i; + struct tty_port *port = &state->port; + + tty_port_init(port); + port->ops = &uart_port_ops; + port->close_delay = 500; /* .5 seconds */ + port->closing_wait = 30000; /* 30 seconds */ + tasklet_init(&state->tlet, uart_tasklet_action, + (unsigned long)state); + } + + retval = tty_register_driver(normal); + if (retval >= 0) + return retval; + + put_tty_driver(normal); +out_kfree: + kfree(drv->state); +out: + return -ENOMEM; +} + +/** + * uart_unregister_driver - remove a driver from the uart core layer + * @drv: low level driver structure + * + * Remove all references to a driver from the core driver. The low + * level driver must have removed all its ports via the + * uart_remove_one_port() if it registered them with uart_add_one_port(). + * (ie, drv->port == NULL) + */ +void uart_unregister_driver(struct uart_driver *drv) +{ + struct tty_driver *p = drv->tty_driver; + tty_unregister_driver(p); + put_tty_driver(p); + kfree(drv->state); + drv->tty_driver = NULL; +} + +struct tty_driver *uart_console_device(struct console *co, int *index) +{ + struct uart_driver *p = co->data; + *index = co->index; + return p->tty_driver; +} + +/** + * uart_add_one_port - attach a driver-defined port structure + * @drv: pointer to the uart low level driver structure for this port + * @uport: uart port structure to use for this port. + * + * This allows the driver to register its own uart_port structure + * with the core driver. The main purpose is to allow the low + * level uart drivers to expand uart_port, rather than having yet + * more levels of structures. + */ +int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) +{ + struct uart_state *state; + struct tty_port *port; + int ret = 0; + struct device *tty_dev; + + BUG_ON(in_interrupt()); + + if (uport->line >= drv->nr) + return -EINVAL; + + state = drv->state + uport->line; + port = &state->port; + + mutex_lock(&port_mutex); + mutex_lock(&port->mutex); + if (state->uart_port) { + ret = -EINVAL; + goto out; + } + + state->uart_port = uport; + state->pm_state = -1; + + uport->cons = drv->cons; + uport->state = state; + + /* + * If this port is a console, then the spinlock is already + * initialised. + */ + if (!(uart_console(uport) && (uport->cons->flags & CON_ENABLED))) { + spin_lock_init(&uport->lock); + lockdep_set_class(&uport->lock, &port_lock_key); + } + + uart_configure_port(drv, state, uport); + + /* + * Register the port whether it's detected or not. This allows + * setserial to be used to alter this ports parameters. + */ + tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev); + if (likely(!IS_ERR(tty_dev))) { + device_init_wakeup(tty_dev, 1); + device_set_wakeup_enable(tty_dev, 0); + } else + printk(KERN_ERR "Cannot register tty device on line %d\n", + uport->line); + + /* + * Ensure UPF_DEAD is not set. + */ + uport->flags &= ~UPF_DEAD; + + out: + mutex_unlock(&port->mutex); + mutex_unlock(&port_mutex); + + return ret; +} + +/** + * uart_remove_one_port - detach a driver defined port structure + * @drv: pointer to the uart low level driver structure for this port + * @uport: uart port structure for this port + * + * This unhooks (and hangs up) the specified port structure from the + * core driver. No further calls will be made to the low-level code + * for this port. + */ +int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) +{ + struct uart_state *state = drv->state + uport->line; + struct tty_port *port = &state->port; + + BUG_ON(in_interrupt()); + + if (state->uart_port != uport) + printk(KERN_ALERT "Removing wrong port: %p != %p\n", + state->uart_port, uport); + + mutex_lock(&port_mutex); + + /* + * Mark the port "dead" - this prevents any opens from + * succeeding while we shut down the port. + */ + mutex_lock(&port->mutex); + uport->flags |= UPF_DEAD; + mutex_unlock(&port->mutex); + + /* + * Remove the devices from the tty layer + */ + tty_unregister_device(drv->tty_driver, uport->line); + + if (port->tty) + tty_vhangup(port->tty); + + /* + * Free the port IO and memory resources, if any. + */ + if (uport->type != PORT_UNKNOWN) + uport->ops->release_port(uport); + + /* + * Indicate that there isn't a port here anymore. + */ + uport->type = PORT_UNKNOWN; + + /* + * Kill the tasklet, and free resources. + */ + tasklet_kill(&state->tlet); + + state->uart_port = NULL; + mutex_unlock(&port_mutex); + + return 0; +} + +/* + * Are the two ports equivalent? + */ +int uart_match_port(struct uart_port *port1, struct uart_port *port2) +{ + if (port1->iotype != port2->iotype) + return 0; + + switch (port1->iotype) { + case UPIO_PORT: + return (port1->iobase == port2->iobase); + case UPIO_HUB6: + return (port1->iobase == port2->iobase) && + (port1->hub6 == port2->hub6); + case UPIO_MEM: + case UPIO_MEM32: + case UPIO_AU: + case UPIO_TSI: + case UPIO_DWAPB: + case UPIO_DWAPB32: + return (port1->mapbase == port2->mapbase); + } + return 0; +} +EXPORT_SYMBOL(uart_match_port); + +EXPORT_SYMBOL(uart_write_wakeup); +EXPORT_SYMBOL(uart_register_driver); +EXPORT_SYMBOL(uart_unregister_driver); +EXPORT_SYMBOL(uart_suspend_port); +EXPORT_SYMBOL(uart_resume_port); +EXPORT_SYMBOL(uart_add_one_port); +EXPORT_SYMBOL(uart_remove_one_port); + +MODULE_DESCRIPTION("Serial driver core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/serial_cs.c b/drivers/tty/serial/serial_cs.c new file mode 100644 index 000000000000..93760b2ea172 --- /dev/null +++ b/drivers/tty/serial/serial_cs.c @@ -0,0 +1,869 @@ +/*====================================================================== + + A driver for PCMCIA serial devices + + serial_cs.c 1.134 2002/05/04 05:48:53 + + The contents of this file are subject to the Mozilla Public + License Version 1.1 (the "License"); you may not use this file + except in compliance with the License. You may obtain a copy of + the License at http://www.mozilla.org/MPL/ + + Software distributed under the License is distributed on an "AS + IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + implied. See the License for the specific language governing + rights and limitations under the License. + + The initial developer of the original code is David A. Hinds + . Portions created by David A. Hinds + are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + + Alternatively, the contents of this file may be used under the + terms of the GNU General Public License version 2 (the "GPL"), in which + case the provisions of the GPL are applicable instead of the + above. If you wish to allow the use of your version of this file + only under the terms of the GPL and not to allow others to use + your version of this file under the MPL, indicate your decision + by deleting the provisions above and replace them with the notice + and other provisions required by the GPL. If you do not delete + the provisions above, a recipient may use your version of this + file under either the MPL or the GPL. + +======================================================================*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "8250.h" + + +/*====================================================================*/ + +/* Parameters that can be set with 'insmod' */ + +/* Enable the speaker? */ +static int do_sound = 1; +/* Skip strict UART tests? */ +static int buggy_uart; + +module_param(do_sound, int, 0444); +module_param(buggy_uart, int, 0444); + +/*====================================================================*/ + +/* Table of multi-port card ID's */ + +struct serial_quirk { + unsigned int manfid; + unsigned int prodid; + int multi; /* 1 = multifunction, > 1 = # ports */ + void (*config)(struct pcmcia_device *); + void (*setup)(struct pcmcia_device *, struct uart_port *); + void (*wakeup)(struct pcmcia_device *); + int (*post)(struct pcmcia_device *); +}; + +struct serial_info { + struct pcmcia_device *p_dev; + int ndev; + int multi; + int slave; + int manfid; + int prodid; + int c950ctrl; + int line[4]; + const struct serial_quirk *quirk; +}; + +struct serial_cfg_mem { + tuple_t tuple; + cisparse_t parse; + u_char buf[256]; +}; + +/* + * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6" + * manfid 0x0160, 0x0104 + * This card appears to have a 14.7456MHz clock. + */ +/* Generic Modem: MD55x (GPRS/EDGE) have + * Elan VPU16551 UART with 14.7456MHz oscillator + * manfid 0x015D, 0x4C45 + */ +static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port) +{ + port->uartclk = 14745600; +} + +static int quirk_post_ibm(struct pcmcia_device *link) +{ + u8 val; + int ret; + + ret = pcmcia_read_config_byte(link, 0x800, &val); + if (ret) + goto failed; + + ret = pcmcia_write_config_byte(link, 0x800, val | 1); + if (ret) + goto failed; + return 0; + + failed: + return -ENODEV; +} + +/* + * Nokia cards are not really multiport cards. Shouldn't this + * be handled by setting the quirk entry .multi = 0 | 1 ? + */ +static void quirk_config_nokia(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->multi > 1) + info->multi = 1; +} + +static void quirk_wakeup_oxsemi(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->c950ctrl) + outb(12, info->c950ctrl + 1); +} + +/* request_region? oxsemi branch does no request_region too... */ +/* + * This sequence is needed to properly initialize MC45 attached to OXCF950. + * I tried decreasing these msleep()s, but it worked properly (survived + * 1000 stop/start operations) with these timeouts (or bigger). + */ +static void quirk_wakeup_possio_gcc(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + unsigned int ctrl = info->c950ctrl; + + outb(0xA, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(300); + outb(0xC, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(200); + outb(0xF, ctrl + 1); + msleep(100); + outb(0xE, ctrl + 1); + msleep(100); + outb(0xC, ctrl + 1); +} + +/* + * Socket Dual IO: this enables irq's for second port + */ +static void quirk_config_socket(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + if (info->multi) + link->config_flags |= CONF_ENABLE_ESR; +} + +static const struct serial_quirk quirks[] = { + { + .manfid = 0x0160, + .prodid = 0x0104, + .multi = -1, + .setup = quirk_setup_brainboxes_0104, + }, { + .manfid = 0x015D, + .prodid = 0x4C45, + .multi = -1, + .setup = quirk_setup_brainboxes_0104, + }, { + .manfid = MANFID_IBM, + .prodid = ~0, + .multi = -1, + .post = quirk_post_ibm, + }, { + .manfid = MANFID_INTEL, + .prodid = PRODID_INTEL_DUAL_RS232, + .multi = 2, + }, { + .manfid = MANFID_NATINST, + .prodid = PRODID_NATINST_QUAD_RS232, + .multi = 4, + }, { + .manfid = MANFID_NOKIA, + .prodid = ~0, + .multi = -1, + .config = quirk_config_nokia, + }, { + .manfid = MANFID_OMEGA, + .prodid = PRODID_OMEGA_QSP_100, + .multi = 4, + }, { + .manfid = MANFID_OXSEMI, + .prodid = ~0, + .multi = -1, + .wakeup = quirk_wakeup_oxsemi, + }, { + .manfid = MANFID_POSSIO, + .prodid = PRODID_POSSIO_GCC, + .multi = -1, + .wakeup = quirk_wakeup_possio_gcc, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232_D1, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_DUAL_RS232_G, + .multi = 2, + }, { + .manfid = MANFID_QUATECH, + .prodid = PRODID_QUATECH_QUAD_RS232, + .multi = 4, + }, { + .manfid = MANFID_SOCKET, + .prodid = PRODID_SOCKET_DUAL_RS232, + .multi = 2, + .config = quirk_config_socket, + }, { + .manfid = MANFID_SOCKET, + .prodid = ~0, + .multi = -1, + .config = quirk_config_socket, + } +}; + + +static int serial_config(struct pcmcia_device * link); + + +static void serial_remove(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + dev_dbg(&link->dev, "serial_release\n"); + + /* + * Recheck to see if the device is still configured. + */ + for (i = 0; i < info->ndev; i++) + serial8250_unregister_port(info->line[i]); + + if (!info->slave) + pcmcia_disable_device(link); +} + +static int serial_suspend(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + for (i = 0; i < info->ndev; i++) + serial8250_suspend_port(info->line[i]); + + return 0; +} + +static int serial_resume(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i; + + for (i = 0; i < info->ndev; i++) + serial8250_resume_port(info->line[i]); + + if (info->quirk && info->quirk->wakeup) + info->quirk->wakeup(link); + + return 0; +} + +static int serial_probe(struct pcmcia_device *link) +{ + struct serial_info *info; + + dev_dbg(&link->dev, "serial_attach()\n"); + + /* Create new serial device */ + info = kzalloc(sizeof (*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + info->p_dev = link; + link->priv = info; + + link->config_flags |= CONF_ENABLE_IRQ; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; + + return serial_config(link); +} + +static void serial_detach(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + + dev_dbg(&link->dev, "serial_detach\n"); + + /* + * Ensure that the ports have been released. + */ + serial_remove(link); + + /* free bits */ + kfree(info); +} + +/*====================================================================*/ + +static int setup_serial(struct pcmcia_device *handle, struct serial_info * info, + unsigned int iobase, int irq) +{ + struct uart_port port; + int line; + + memset(&port, 0, sizeof (struct uart_port)); + port.iobase = iobase; + port.irq = irq; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + port.uartclk = 1843200; + port.dev = &handle->dev; + if (buggy_uart) + port.flags |= UPF_BUGGY_UART; + + if (info->quirk && info->quirk->setup) + info->quirk->setup(handle, &port); + + line = serial8250_register_port(&port); + if (line < 0) { + printk(KERN_NOTICE "serial_cs: serial8250_register_port() at " + "0x%04lx, irq %d failed\n", (u_long)iobase, irq); + return -EINVAL; + } + + info->line[info->ndev] = line; + info->ndev++; + + return 0; +} + +/*====================================================================*/ + +static int pfc_config(struct pcmcia_device *p_dev) +{ + unsigned int port = 0; + struct serial_info *info = p_dev->priv; + + if ((p_dev->resource[1]->end != 0) && + (resource_size(p_dev->resource[1]) == 8)) { + port = p_dev->resource[1]->start; + info->slave = 1; + } else if ((info->manfid == MANFID_OSITECH) && + (resource_size(p_dev->resource[0]) == 0x40)) { + port = p_dev->resource[0]->start + 0x28; + info->slave = 1; + } + if (info->slave) + return setup_serial(p_dev, info, port, p_dev->irq); + + dev_warn(&p_dev->dev, "no usable port range found, giving up\n"); + return -ENODEV; +} + +static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data) +{ + static const int size_table[2] = { 8, 16 }; + int *try = priv_data; + + if (p_dev->resource[0]->start == 0) + return -ENODEV; + + if ((*try & 0x1) == 0) + p_dev->io_lines = 16; + + if (p_dev->resource[0]->end != size_table[(*try >> 1)]) + return -ENODEV; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); +} + +static int simple_config_check_notpicky(struct pcmcia_device *p_dev, + void *priv_data) +{ + static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; + int j; + + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; + } + return -ENODEV; +} + +static int simple_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i = -ENODEV, try; + + /* First pass: look for a config entry that looks normal. + * Two tries: without IO aliases, then with aliases */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_SET_IO; + for (try = 0; try < 4; try++) + if (!pcmcia_loop_config(link, simple_config_check, &try)) + goto found_port; + + /* Second pass: try to find an entry that isn't picky about + its base address, then try to grab any standard serial port + address, and finally try to get any free port. */ + if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) + goto found_port; + + dev_warn(&link->dev, "no usable port range found, giving up\n"); + return -1; + +found_port: + if (info->multi && (info->manfid == MANFID_3COM)) + link->config_index &= ~(0x08); + + /* + * Apply any configuration quirks. + */ + if (info->quirk && info->quirk->config) + info->quirk->config(link); + + i = pcmcia_enable_device(link); + if (i != 0) + return -1; + return setup_serial(link, info, link->resource[0]->start, link->irq); +} + +static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) +{ + int *multi = priv_data; + + if (p_dev->resource[1]->end) + return -EINVAL; + + /* The quad port cards have bad CIS's, so just look for a + window larger than 8 ports and assume it will be right */ + if (p_dev->resource[0]->end <= 8) + return -EINVAL; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = *multi * 8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + return 0; +} + +static int multi_config_check_notpicky(struct pcmcia_device *p_dev, + void *priv_data) +{ + int *base2 = priv_data; + + if (!p_dev->resource[0]->end || !p_dev->resource[1]->end) + return -ENODEV; + + p_dev->resource[0]->end = p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + + *base2 = p_dev->resource[0]->start + 8; + return 0; +} + +static int multi_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i, base2 = 0; + + link->config_flags |= CONF_AUTO_SET_IO; + /* First, look for a generic full-sized window */ + if (!pcmcia_loop_config(link, multi_config_check, &info->multi)) + base2 = link->resource[0]->start + 8; + else { + /* If that didn't work, look for two windows */ + info->multi = 2; + if (pcmcia_loop_config(link, multi_config_check_notpicky, + &base2)) { + dev_warn(&link->dev, "no usable port range " + "found, giving up\n"); + return -ENODEV; + } + } + + if (!link->irq) + dev_warn(&link->dev, "no usable IRQ found, continuing...\n"); + + /* + * Apply any configuration quirks. + */ + if (info->quirk && info->quirk->config) + info->quirk->config(link); + + i = pcmcia_enable_device(link); + if (i != 0) + return -ENODEV; + + /* The Oxford Semiconductor OXCF950 cards are in fact single-port: + * 8 registers are for the UART, the others are extra registers. + * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too. + */ + if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO && + info->prodid == PRODID_POSSIO_GCC)) { + int err; + + if (link->config_index == 1 || + link->config_index == 3) { + err = setup_serial(link, info, base2, + link->irq); + base2 = link->resource[0]->start; + } else { + err = setup_serial(link, info, link->resource[0]->start, + link->irq); + } + info->c950ctrl = base2; + + /* + * FIXME: We really should wake up the port prior to + * handing it over to the serial layer. + */ + if (info->quirk && info->quirk->wakeup) + info->quirk->wakeup(link); + + return 0; + } + + setup_serial(link, info, link->resource[0]->start, link->irq); + for (i = 0; i < info->multi - 1; i++) + setup_serial(link, info, base2 + (8 * i), + link->irq); + return 0; +} + +static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data) +{ + struct serial_info *info = p_dev->priv; + + if (!p_dev->resource[0]->end) + return -EINVAL; + + if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0)) + info->multi = p_dev->resource[0]->end >> 3; + + if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8) + && (p_dev->resource[1]->end == 8)) + info->multi = 2; + + return 0; /* break */ +} + + +static int serial_config(struct pcmcia_device * link) +{ + struct serial_info *info = link->priv; + int i; + + dev_dbg(&link->dev, "serial_config\n"); + + /* Is this a compliant multifunction card? */ + info->multi = (link->socket->functions > 1); + + /* Is this a multiport card? */ + info->manfid = link->manf_id; + info->prodid = link->card_id; + + for (i = 0; i < ARRAY_SIZE(quirks); i++) + if ((quirks[i].manfid == ~0 || + quirks[i].manfid == info->manfid) && + (quirks[i].prodid == ~0 || + quirks[i].prodid == info->prodid)) { + info->quirk = &quirks[i]; + break; + } + + /* Another check for dual-serial cards: look for either serial or + multifunction cards that ask for appropriate IO port ranges */ + if ((info->multi == 0) && + (link->has_func_id) && + (link->socket->pcmcia_pfc == 0) && + ((link->func_id == CISTPL_FUNCID_MULTI) || + (link->func_id == CISTPL_FUNCID_SERIAL))) + pcmcia_loop_config(link, serial_check_for_multi, info); + + /* + * Apply any multi-port quirk. + */ + if (info->quirk && info->quirk->multi != -1) + info->multi = info->quirk->multi; + + dev_info(&link->dev, + "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n", + link->manf_id, link->card_id, + link->socket->pcmcia_pfc, info->multi, info->quirk); + if (link->socket->pcmcia_pfc) + i = pfc_config(link); + else if (info->multi > 1) + i = multi_config(link); + else + i = simple_config(link); + + if (i || info->ndev == 0) + goto failed; + + /* + * Apply any post-init quirk. FIXME: This should really happen + * before we register the port, since it might already be in use. + */ + if (info->quirk && info->quirk->post) + if (info->quirk->post(link)) + goto failed; + + return 0; + +failed: + dev_warn(&link->dev, "failed to initialize\n"); + serial_remove(link); + return -ENODEV; +} + +static struct pcmcia_device_id serial_ids[] = { + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), + PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29), + PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed), + PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05), + PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101), + PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070), + PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020), + PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3), + PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15), + PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77), + PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302), + PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301), + PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276), + PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039), + PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006), + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */ + PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a), + PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */ + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53), + PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180), + PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */ + PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */ + PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */ + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045), + PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052), + PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */ + PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */ + PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae), + PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef), + PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0), + PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e), + PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a), + PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02), + PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa), + PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76), + PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95), + PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed), + PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65), + PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b), + PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6), + PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb), + PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447), + PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f), + PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f), + PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383), + PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e), + PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a), + PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41), + PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab), + PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f), + PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d), + PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38), + PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"), + PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ + PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), + PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"), + PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"), + PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3), + PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676), + PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc), + PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7), + PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41), + PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029), + PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), + PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4), + PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b), + /* too generic */ + /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */ + /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */ + PCMCIA_DEVICE_FUNC_ID(2), + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, serial_ids); + +MODULE_FIRMWARE("cis/PCMLM28.cis"); +MODULE_FIRMWARE("cis/DP83903.cis"); +MODULE_FIRMWARE("cis/3CCFEM556.cis"); +MODULE_FIRMWARE("cis/3CXEM556.cis"); +MODULE_FIRMWARE("cis/SW_8xx_SER.cis"); +MODULE_FIRMWARE("cis/SW_7xx_SER.cis"); +MODULE_FIRMWARE("cis/SW_555_SER.cis"); +MODULE_FIRMWARE("cis/MT5634ZLX.cis"); +MODULE_FIRMWARE("cis/COMpad2.cis"); +MODULE_FIRMWARE("cis/COMpad4.cis"); +MODULE_FIRMWARE("cis/RS-COM-2P.cis"); + +static struct pcmcia_driver serial_cs_driver = { + .owner = THIS_MODULE, + .name = "serial_cs", + .probe = serial_probe, + .remove = serial_detach, + .id_table = serial_ids, + .suspend = serial_suspend, + .resume = serial_resume, +}; + +static int __init init_serial_cs(void) +{ + return pcmcia_register_driver(&serial_cs_driver); +} + +static void __exit exit_serial_cs(void) +{ + pcmcia_unregister_driver(&serial_cs_driver); +} + +module_init(init_serial_cs); +module_exit(exit_serial_cs); + +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/serial_ks8695.c b/drivers/tty/serial/serial_ks8695.c new file mode 100644 index 000000000000..b1962025b1aa --- /dev/null +++ b/drivers/tty/serial/serial_ks8695.c @@ -0,0 +1,705 @@ +/* + * drivers/serial/serial_ks8695.c + * + * Driver for KS8695 serial ports + * + * Based on drivers/serial/serial_amba.c, by Kam Lee. + * + * Copyright 2002-2005 Micrel Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + + +#define SERIAL_KS8695_MAJOR 204 +#define SERIAL_KS8695_MINOR 16 +#define SERIAL_KS8695_DEVNAME "ttyAM" + +#define SERIAL_KS8695_NR 1 + +/* + * Access macros for the KS8695 UART + */ +#define UART_GET_CHAR(p) (__raw_readl((p)->membase + KS8695_URRB) & 0xFF) +#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + KS8695_URTH) +#define UART_GET_FCR(p) __raw_readl((p)->membase + KS8695_URFC) +#define UART_PUT_FCR(p, c) __raw_writel((c), (p)->membase + KS8695_URFC) +#define UART_GET_MSR(p) __raw_readl((p)->membase + KS8695_URMS) +#define UART_GET_LSR(p) __raw_readl((p)->membase + KS8695_URLS) +#define UART_GET_LCR(p) __raw_readl((p)->membase + KS8695_URLC) +#define UART_PUT_LCR(p, c) __raw_writel((c), (p)->membase + KS8695_URLC) +#define UART_GET_MCR(p) __raw_readl((p)->membase + KS8695_URMC) +#define UART_PUT_MCR(p, c) __raw_writel((c), (p)->membase + KS8695_URMC) +#define UART_GET_BRDR(p) __raw_readl((p)->membase + KS8695_URBD) +#define UART_PUT_BRDR(p, c) __raw_writel((c), (p)->membase + KS8695_URBD) + +#define KS8695_CLR_TX_INT() __raw_writel(1 << KS8695_IRQ_UART_TX, KS8695_IRQ_VA + KS8695_INTST) + +#define UART_DUMMY_LSR_RX 0x100 +#define UART_PORT_SIZE (KS8695_USR - KS8695_URRB + 4) + +static inline int tx_enabled(struct uart_port *port) +{ + return port->unused[0] & 1; +} + +static inline int rx_enabled(struct uart_port *port) +{ + return port->unused[0] & 2; +} + +static inline int ms_enabled(struct uart_port *port) +{ + return port->unused[0] & 4; +} + +static inline void ms_enable(struct uart_port *port, int enabled) +{ + if(enabled) + port->unused[0] |= 4; + else + port->unused[0] &= ~4; +} + +static inline void rx_enable(struct uart_port *port, int enabled) +{ + if(enabled) + port->unused[0] |= 2; + else + port->unused[0] &= ~2; +} + +static inline void tx_enable(struct uart_port *port, int enabled) +{ + if(enabled) + port->unused[0] |= 1; + else + port->unused[0] &= ~1; +} + + +#ifdef SUPPORT_SYSRQ +static struct console ks8695_console; +#endif + +static void ks8695uart_stop_tx(struct uart_port *port) +{ + if (tx_enabled(port)) { + /* use disable_irq_nosync() and not disable_irq() to avoid self + * imposed deadlock by not waiting for irq handler to end, + * since this ks8695uart_stop_tx() is called from interrupt context. + */ + disable_irq_nosync(KS8695_IRQ_UART_TX); + tx_enable(port, 0); + } +} + +static void ks8695uart_start_tx(struct uart_port *port) +{ + if (!tx_enabled(port)) { + enable_irq(KS8695_IRQ_UART_TX); + tx_enable(port, 1); + } +} + +static void ks8695uart_stop_rx(struct uart_port *port) +{ + if (rx_enabled(port)) { + disable_irq(KS8695_IRQ_UART_RX); + rx_enable(port, 0); + } +} + +static void ks8695uart_enable_ms(struct uart_port *port) +{ + if (!ms_enabled(port)) { + enable_irq(KS8695_IRQ_UART_MODEM_STATUS); + ms_enable(port,1); + } +} + +static void ks8695uart_disable_ms(struct uart_port *port) +{ + if (ms_enabled(port)) { + disable_irq(KS8695_IRQ_UART_MODEM_STATUS); + ms_enable(port,0); + } +} + +static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct tty_struct *tty = port->state->port.tty; + unsigned int status, ch, lsr, flg, max_count = 256; + + status = UART_GET_LSR(port); /* clears pending LSR interrupts */ + while ((status & URLS_URDR) && max_count--) { + ch = UART_GET_CHAR(port); + flg = TTY_NORMAL; + + port->icount.rx++; + + /* + * Note that the error handling code is + * out of the main execution path + */ + lsr = UART_GET_LSR(port) | UART_DUMMY_LSR_RX; + if (unlikely(lsr & (URLS_URBI | URLS_URPE | URLS_URFE | URLS_URROE))) { + if (lsr & URLS_URBI) { + lsr &= ~(URLS_URFE | URLS_URPE); + port->icount.brk++; + if (uart_handle_break(port)) + goto ignore_char; + } + if (lsr & URLS_URPE) + port->icount.parity++; + if (lsr & URLS_URFE) + port->icount.frame++; + if (lsr & URLS_URROE) + port->icount.overrun++; + + lsr &= port->read_status_mask; + + if (lsr & URLS_URBI) + flg = TTY_BREAK; + else if (lsr & URLS_URPE) + flg = TTY_PARITY; + else if (lsr & URLS_URFE) + flg = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + goto ignore_char; + + uart_insert_char(port, lsr, URLS_URROE, ch, flg); + +ignore_char: + status = UART_GET_LSR(port); + } + tty_flip_buffer_push(tty); + + return IRQ_HANDLED; +} + + +static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct circ_buf *xmit = &port->state->xmit; + unsigned int count; + + if (port->x_char) { + KS8695_CLR_TX_INT(); + UART_PUT_CHAR(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return IRQ_HANDLED; + } + + if (uart_tx_stopped(port) || uart_circ_empty(xmit)) { + ks8695uart_stop_tx(port); + return IRQ_HANDLED; + } + + count = 16; /* fifo size */ + while (!uart_circ_empty(xmit) && (count-- > 0)) { + KS8695_CLR_TX_INT(); + UART_PUT_CHAR(port, xmit->buf[xmit->tail]); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + ks8695uart_stop_tx(port); + + return IRQ_HANDLED; +} + +static irqreturn_t ks8695uart_modem_status(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned int status; + + /* + * clear modem interrupt by reading MSR + */ + status = UART_GET_MSR(port); + + if (status & URMS_URDDCD) + uart_handle_dcd_change(port, status & URMS_URDDCD); + + if (status & URMS_URDDST) + port->icount.dsr++; + + if (status & URMS_URDCTS) + uart_handle_cts_change(port, status & URMS_URDCTS); + + if (status & URMS_URTERI) + port->icount.rng++; + + wake_up_interruptible(&port->state->port.delta_msr_wait); + + return IRQ_HANDLED; +} + +static unsigned int ks8695uart_tx_empty(struct uart_port *port) +{ + return (UART_GET_LSR(port) & URLS_URTE) ? TIOCSER_TEMT : 0; +} + +static unsigned int ks8695uart_get_mctrl(struct uart_port *port) +{ + unsigned int result = 0; + unsigned int status; + + status = UART_GET_MSR(port); + if (status & URMS_URDCD) + result |= TIOCM_CAR; + if (status & URMS_URDSR) + result |= TIOCM_DSR; + if (status & URMS_URCTS) + result |= TIOCM_CTS; + if (status & URMS_URRI) + result |= TIOCM_RI; + + return result; +} + +static void ks8695uart_set_mctrl(struct uart_port *port, u_int mctrl) +{ + unsigned int mcr; + + mcr = UART_GET_MCR(port); + if (mctrl & TIOCM_RTS) + mcr |= URMC_URRTS; + else + mcr &= ~URMC_URRTS; + + if (mctrl & TIOCM_DTR) + mcr |= URMC_URDTR; + else + mcr &= ~URMC_URDTR; + + UART_PUT_MCR(port, mcr); +} + +static void ks8695uart_break_ctl(struct uart_port *port, int break_state) +{ + unsigned int lcr; + + lcr = UART_GET_LCR(port); + + if (break_state == -1) + lcr |= URLC_URSBC; + else + lcr &= ~URLC_URSBC; + + UART_PUT_LCR(port, lcr); +} + +static int ks8695uart_startup(struct uart_port *port) +{ + int retval; + + set_irq_flags(KS8695_IRQ_UART_TX, IRQF_VALID | IRQF_NOAUTOEN); + tx_enable(port, 0); + rx_enable(port, 1); + ms_enable(port, 1); + + /* + * Allocate the IRQ + */ + retval = request_irq(KS8695_IRQ_UART_TX, ks8695uart_tx_chars, IRQF_DISABLED, "UART TX", port); + if (retval) + goto err_tx; + + retval = request_irq(KS8695_IRQ_UART_RX, ks8695uart_rx_chars, IRQF_DISABLED, "UART RX", port); + if (retval) + goto err_rx; + + retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, IRQF_DISABLED, "UART LineStatus", port); + if (retval) + goto err_ls; + + retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, IRQF_DISABLED, "UART ModemStatus", port); + if (retval) + goto err_ms; + + return 0; + +err_ms: + free_irq(KS8695_IRQ_UART_LINE_STATUS, port); +err_ls: + free_irq(KS8695_IRQ_UART_RX, port); +err_rx: + free_irq(KS8695_IRQ_UART_TX, port); +err_tx: + return retval; +} + +static void ks8695uart_shutdown(struct uart_port *port) +{ + /* + * Free the interrupt + */ + free_irq(KS8695_IRQ_UART_RX, port); + free_irq(KS8695_IRQ_UART_TX, port); + free_irq(KS8695_IRQ_UART_MODEM_STATUS, port); + free_irq(KS8695_IRQ_UART_LINE_STATUS, port); + + /* disable break condition and fifos */ + UART_PUT_LCR(port, UART_GET_LCR(port) & ~URLC_URSBC); + UART_PUT_FCR(port, UART_GET_FCR(port) & ~URFC_URFE); +} + +static void ks8695uart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) +{ + unsigned int lcr, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr = URCL_5; + break; + case CS6: + lcr = URCL_6; + break; + case CS7: + lcr = URCL_7; + break; + default: + lcr = URCL_8; + break; + } + + /* stop bits */ + if (termios->c_cflag & CSTOPB) + lcr |= URLC_URSB; + + /* parity */ + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */ + if (termios->c_cflag & PARODD) + lcr |= URPE_MARK; + else + lcr |= URPE_SPACE; + } + else if (termios->c_cflag & PARODD) + lcr |= URPE_ODD; + else + lcr |= URPE_EVEN; + } + + if (port->fifosize > 1) + fcr = URFC_URFRT_8 | URFC_URTFR | URFC_URRFR | URFC_URFE; + + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = URLS_URROE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= (URLS_URFE | URLS_URPE); + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= URLS_URBI; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= (URLS_URFE | URLS_URPE); + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= URLS_URBI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= URLS_URROE; + } + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_DUMMY_LSR_RX; + + /* first, disable everything */ + if (UART_ENABLE_MS(port, termios->c_cflag)) + ks8695uart_enable_ms(port); + else + ks8695uart_disable_ms(port); + + /* Set baud rate */ + UART_PUT_BRDR(port, quot); + + UART_PUT_LCR(port, lcr); + UART_PUT_FCR(port, fcr); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *ks8695uart_type(struct uart_port *port) +{ + return port->type == PORT_KS8695 ? "KS8695" : NULL; +} + +/* + * Release the memory region(s) being used by 'port' + */ +static void ks8695uart_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, UART_PORT_SIZE); +} + +/* + * Request the memory region(s) being used by 'port' + */ +static int ks8695uart_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, UART_PORT_SIZE, + "serial_ks8695") != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void ks8695uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_KS8695; + ks8695uart_request_port(port); + } +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int ks8695uart_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_KS8695) + ret = -EINVAL; + if (ser->irq != port->irq) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static struct uart_ops ks8695uart_pops = { + .tx_empty = ks8695uart_tx_empty, + .set_mctrl = ks8695uart_set_mctrl, + .get_mctrl = ks8695uart_get_mctrl, + .stop_tx = ks8695uart_stop_tx, + .start_tx = ks8695uart_start_tx, + .stop_rx = ks8695uart_stop_rx, + .enable_ms = ks8695uart_enable_ms, + .break_ctl = ks8695uart_break_ctl, + .startup = ks8695uart_startup, + .shutdown = ks8695uart_shutdown, + .set_termios = ks8695uart_set_termios, + .type = ks8695uart_type, + .release_port = ks8695uart_release_port, + .request_port = ks8695uart_request_port, + .config_port = ks8695uart_config_port, + .verify_port = ks8695uart_verify_port, +}; + +static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = { + { + .membase = (void *) KS8695_UART_VA, + .mapbase = KS8695_UART_VA, + .iotype = SERIAL_IO_MEM, + .irq = KS8695_IRQ_UART_TX, + .uartclk = KS8695_CLOCK_RATE * 16, + .fifosize = 16, + .ops = &ks8695uart_pops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + } +}; + +#ifdef CONFIG_SERIAL_KS8695_CONSOLE +static void ks8695_console_putchar(struct uart_port *port, int ch) +{ + while (!(UART_GET_LSR(port) & URLS_URTHRE)) + barrier(); + + UART_PUT_CHAR(port, ch); +} + +static void ks8695_console_write(struct console *co, const char *s, u_int count) +{ + struct uart_port *port = ks8695uart_ports + co->index; + + uart_console_write(port, s, count, ks8695_console_putchar); +} + +static void __init ks8695_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits) +{ + unsigned int lcr; + + lcr = UART_GET_LCR(port); + + switch (lcr & URLC_PARITY) { + case URPE_ODD: + *parity = 'o'; + break; + case URPE_EVEN: + *parity = 'e'; + break; + default: + *parity = 'n'; + } + + switch (lcr & URLC_URCL) { + case URCL_5: + *bits = 5; + break; + case URCL_6: + *bits = 6; + break; + case URCL_7: + *bits = 7; + break; + default: + *bits = 8; + } + + *baud = port->uartclk / (UART_GET_BRDR(port) & 0x0FFF); + *baud /= 16; + *baud &= 0xFFFFFFF0; +} + +static int __init ks8695_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + port = uart_get_console(ks8695uart_ports, SERIAL_KS8695_NR, co); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + ks8695_console_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver ks8695_reg; + +static struct console ks8695_console = { + .name = SERIAL_KS8695_DEVNAME, + .write = ks8695_console_write, + .device = uart_console_device, + .setup = ks8695_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &ks8695_reg, +}; + +static int __init ks8695_console_init(void) +{ + add_preferred_console(SERIAL_KS8695_DEVNAME, 0, NULL); + register_console(&ks8695_console); + return 0; +} + +console_initcall(ks8695_console_init); + +#define KS8695_CONSOLE &ks8695_console +#else +#define KS8695_CONSOLE NULL +#endif + +static struct uart_driver ks8695_reg = { + .owner = THIS_MODULE, + .driver_name = "serial_ks8695", + .dev_name = SERIAL_KS8695_DEVNAME, + .major = SERIAL_KS8695_MAJOR, + .minor = SERIAL_KS8695_MINOR, + .nr = SERIAL_KS8695_NR, + .cons = KS8695_CONSOLE, +}; + +static int __init ks8695uart_init(void) +{ + int i, ret; + + printk(KERN_INFO "Serial: Micrel KS8695 UART driver\n"); + + ret = uart_register_driver(&ks8695_reg); + if (ret) + return ret; + + for (i = 0; i < SERIAL_KS8695_NR; i++) + uart_add_one_port(&ks8695_reg, &ks8695uart_ports[0]); + + return 0; +} + +static void __exit ks8695uart_exit(void) +{ + int i; + + for (i = 0; i < SERIAL_KS8695_NR; i++) + uart_remove_one_port(&ks8695_reg, &ks8695uart_ports[0]); + uart_unregister_driver(&ks8695_reg); +} + +module_init(ks8695uart_init); +module_exit(ks8695uart_exit); + +MODULE_DESCRIPTION("KS8695 serial port driver"); +MODULE_AUTHOR("Micrel Inc."); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/serial_lh7a40x.c b/drivers/tty/serial/serial_lh7a40x.c new file mode 100644 index 000000000000..ea744707c4d6 --- /dev/null +++ b/drivers/tty/serial/serial_lh7a40x.c @@ -0,0 +1,682 @@ +/* drivers/serial/serial_lh7a40x.c + * + * Copyright (C) 2004 Coastal Environmental Systems + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + */ + +/* Driver for Sharp LH7A40X embedded serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Based on drivers/serial/amba.c, by Deep Blue Solutions Ltd. + * + * --- + * + * This driver supports the embedded UARTs of the Sharp LH7A40X series + * CPUs. While similar to the 16550 and other UART chips, there is + * nothing close to register compatibility. Moreover, some of the + * modem control lines are not available, either in the chip or they + * are lacking in the board-level implementation. + * + * - Use of SIRDIS + * For simplicity, we disable the IR functions of any UART whenever + * we enable it. + * + */ + + +#if defined(CONFIG_SERIAL_LH7A40X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DEV_MAJOR 204 +#define DEV_MINOR 16 +#define DEV_NR 3 + +#define ISR_LOOP_LIMIT 256 + +#define UR(p,o) _UR ((p)->membase, o) +#define _UR(b,o) (*((volatile unsigned int*)(((unsigned char*) b) + (o)))) +#define BIT_CLR(p,o,m) UR(p,o) = UR(p,o) & (~(unsigned int)m) +#define BIT_SET(p,o,m) UR(p,o) = UR(p,o) | ( (unsigned int)m) + +#define UART_REG_SIZE 32 + +#define UART_R_DATA (0x00) +#define UART_R_FCON (0x04) +#define UART_R_BRCON (0x08) +#define UART_R_CON (0x0c) +#define UART_R_STATUS (0x10) +#define UART_R_RAWISR (0x14) +#define UART_R_INTEN (0x18) +#define UART_R_ISR (0x1c) + +#define UARTEN (0x01) /* UART enable */ +#define SIRDIS (0x02) /* Serial IR disable (UART1 only) */ + +#define RxEmpty (0x10) +#define TxEmpty (0x80) +#define TxFull (0x20) +#define nRxRdy RxEmpty +#define nTxRdy TxFull +#define TxBusy (0x08) + +#define RxBreak (0x0800) +#define RxOverrunError (0x0400) +#define RxParityError (0x0200) +#define RxFramingError (0x0100) +#define RxError (RxBreak | RxOverrunError | RxParityError | RxFramingError) + +#define DCD (0x04) +#define DSR (0x02) +#define CTS (0x01) + +#define RxInt (0x01) +#define TxInt (0x02) +#define ModemInt (0x04) +#define RxTimeoutInt (0x08) + +#define MSEOI (0x10) + +#define WLEN_8 (0x60) +#define WLEN_7 (0x40) +#define WLEN_6 (0x20) +#define WLEN_5 (0x00) +#define WLEN (0x60) /* Mask for all word-length bits */ +#define STP2 (0x08) +#define PEN (0x02) /* Parity Enable */ +#define EPS (0x04) /* Even Parity Set */ +#define FEN (0x10) /* FIFO Enable */ +#define BRK (0x01) /* Send Break */ + + +struct uart_port_lh7a40x { + struct uart_port port; + unsigned int statusPrev; /* Most recently read modem status */ +}; + +static void lh7a40xuart_stop_tx (struct uart_port* port) +{ + BIT_CLR (port, UART_R_INTEN, TxInt); +} + +static void lh7a40xuart_start_tx (struct uart_port* port) +{ + BIT_SET (port, UART_R_INTEN, TxInt); + + /* *** FIXME: do I need to check for startup of the + transmitter? The old driver did, but AMBA + doesn't . */ +} + +static void lh7a40xuart_stop_rx (struct uart_port* port) +{ + BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt); +} + +static void lh7a40xuart_enable_ms (struct uart_port* port) +{ + BIT_SET (port, UART_R_INTEN, ModemInt); +} + +static void lh7a40xuart_rx_chars (struct uart_port* port) +{ + struct tty_struct* tty = port->state->port.tty; + int cbRxMax = 256; /* (Gross) limit on receive */ + unsigned int data; /* Received data and status */ + unsigned int flag; + + while (!(UR (port, UART_R_STATUS) & nRxRdy) && --cbRxMax) { + data = UR (port, UART_R_DATA); + flag = TTY_NORMAL; + ++port->icount.rx; + + if (unlikely(data & RxError)) { + if (data & RxBreak) { + data &= ~(RxFramingError | RxParityError); + ++port->icount.brk; + if (uart_handle_break (port)) + continue; + } + else if (data & RxParityError) + ++port->icount.parity; + else if (data & RxFramingError) + ++port->icount.frame; + if (data & RxOverrunError) + ++port->icount.overrun; + + /* Mask by termios, leave Rx'd byte */ + data &= port->read_status_mask | 0xff; + + if (data & RxBreak) + flag = TTY_BREAK; + else if (data & RxParityError) + flag = TTY_PARITY; + else if (data & RxFramingError) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char (port, (unsigned char) data)) + continue; + + uart_insert_char(port, data, RxOverrunError, data, flag); + } + tty_flip_buffer_push (tty); + return; +} + +static void lh7a40xuart_tx_chars (struct uart_port* port) +{ + struct circ_buf* xmit = &port->state->xmit; + int cbTxMax = port->fifosize; + + if (port->x_char) { + UR (port, UART_R_DATA) = port->x_char; + ++port->icount.tx; + port->x_char = 0; + return; + } + if (uart_circ_empty (xmit) || uart_tx_stopped (port)) { + lh7a40xuart_stop_tx (port); + return; + } + + /* Unlike the AMBA UART, the lh7a40x UART does not guarantee + that at least half of the FIFO is empty. Instead, we check + status for every character. Using the AMBA method causes + the transmitter to drop characters. */ + + do { + UR (port, UART_R_DATA) = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + ++port->icount.tx; + if (uart_circ_empty(xmit)) + break; + } while (!(UR (port, UART_R_STATUS) & nTxRdy) + && cbTxMax--); + + if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS) + uart_write_wakeup (port); + + if (uart_circ_empty (xmit)) + lh7a40xuart_stop_tx (port); +} + +static void lh7a40xuart_modem_status (struct uart_port* port) +{ + unsigned int status = UR (port, UART_R_STATUS); + unsigned int delta + = status ^ ((struct uart_port_lh7a40x*) port)->statusPrev; + + BIT_SET (port, UART_R_RAWISR, MSEOI); /* Clear modem status intr */ + + if (!delta) /* Only happens if we missed 2 transitions */ + return; + + ((struct uart_port_lh7a40x*) port)->statusPrev = status; + + if (delta & DCD) + uart_handle_dcd_change (port, status & DCD); + + if (delta & DSR) + ++port->icount.dsr; + + if (delta & CTS) + uart_handle_cts_change (port, status & CTS); + + wake_up_interruptible (&port->state->port.delta_msr_wait); +} + +static irqreturn_t lh7a40xuart_int (int irq, void* dev_id) +{ + struct uart_port* port = dev_id; + unsigned int cLoopLimit = ISR_LOOP_LIMIT; + unsigned int isr = UR (port, UART_R_ISR); + + + do { + if (isr & (RxInt | RxTimeoutInt)) + lh7a40xuart_rx_chars(port); + if (isr & ModemInt) + lh7a40xuart_modem_status (port); + if (isr & TxInt) + lh7a40xuart_tx_chars (port); + + if (--cLoopLimit == 0) + break; + + isr = UR (port, UART_R_ISR); + } while (isr & (RxInt | TxInt | RxTimeoutInt)); + + return IRQ_HANDLED; +} + +static unsigned int lh7a40xuart_tx_empty (struct uart_port* port) +{ + return (UR (port, UART_R_STATUS) & TxEmpty) ? TIOCSER_TEMT : 0; +} + +static unsigned int lh7a40xuart_get_mctrl (struct uart_port* port) +{ + unsigned int result = 0; + unsigned int status = UR (port, UART_R_STATUS); + + if (status & DCD) + result |= TIOCM_CAR; + if (status & DSR) + result |= TIOCM_DSR; + if (status & CTS) + result |= TIOCM_CTS; + + return result; +} + +static void lh7a40xuart_set_mctrl (struct uart_port* port, unsigned int mctrl) +{ + /* None of the ports supports DTR. UART1 supports RTS through GPIO. */ + /* Note, kernel appears to be setting DTR and RTS on console. */ + + /* *** FIXME: this deserves more work. There's some work in + tracing all of the IO pins. */ +#if 0 + if( port->mapbase == UART1_PHYS) { + gpioRegs_t *gpio = (gpioRegs_t *)IO_ADDRESS(GPIO_PHYS); + + if (mctrl & TIOCM_RTS) + gpio->pbdr &= ~GPIOB_UART1_RTS; + else + gpio->pbdr |= GPIOB_UART1_RTS; + } +#endif +} + +static void lh7a40xuart_break_ctl (struct uart_port* port, int break_state) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (break_state == -1) + BIT_SET (port, UART_R_FCON, BRK); /* Assert break */ + else + BIT_CLR (port, UART_R_FCON, BRK); /* Deassert break */ + spin_unlock_irqrestore(&port->lock, flags); +} + +static int lh7a40xuart_startup (struct uart_port* port) +{ + int retval; + + retval = request_irq (port->irq, lh7a40xuart_int, 0, + "serial_lh7a40x", port); + if (retval) + return retval; + + /* Initial modem control-line settings */ + ((struct uart_port_lh7a40x*) port)->statusPrev + = UR (port, UART_R_STATUS); + + /* There is presently no configuration option to enable IR. + Thus, we always disable it. */ + + BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); + BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt); + + return 0; +} + +static void lh7a40xuart_shutdown (struct uart_port* port) +{ + free_irq (port->irq, port); + BIT_CLR (port, UART_R_FCON, BRK | FEN); + BIT_CLR (port, UART_R_CON, UARTEN); +} + +static void lh7a40xuart_set_termios (struct uart_port* port, + struct ktermios* termios, + struct ktermios* old) +{ + unsigned int con; + unsigned int inten; + unsigned int fcon; + unsigned long flags; + unsigned int baud; + unsigned int quot; + + baud = uart_get_baud_rate (port, termios, old, 8, port->uartclk/16); + quot = uart_get_divisor (port, baud); /* -1 performed elsewhere */ + + switch (termios->c_cflag & CSIZE) { + case CS5: + fcon = WLEN_5; + break; + case CS6: + fcon = WLEN_6; + break; + case CS7: + fcon = WLEN_7; + break; + case CS8: + default: + fcon = WLEN_8; + break; + } + if (termios->c_cflag & CSTOPB) + fcon |= STP2; + if (termios->c_cflag & PARENB) { + fcon |= PEN; + if (!(termios->c_cflag & PARODD)) + fcon |= EPS; + } + if (port->fifosize > 1) + fcon |= FEN; + + spin_lock_irqsave (&port->lock, flags); + + uart_update_timeout (port, termios->c_cflag, baud); + + port->read_status_mask = RxOverrunError; + if (termios->c_iflag & INPCK) + port->read_status_mask |= RxFramingError | RxParityError; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= RxBreak; + + /* Figure mask for status we ignore */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= RxFramingError | RxParityError; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= RxBreak; + /* Ignore overrun when ignorning parity */ + /* *** FIXME: is this in the right place? */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= RxOverrunError; + } + + /* Ignore all receive errors when receive disabled */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= RxError; + + con = UR (port, UART_R_CON); + inten = (UR (port, UART_R_INTEN) & ~ModemInt); + + if (UART_ENABLE_MS (port, termios->c_cflag)) + inten |= ModemInt; + + BIT_CLR (port, UART_R_CON, UARTEN); /* Disable UART */ + UR (port, UART_R_INTEN) = 0; /* Disable interrupts */ + UR (port, UART_R_BRCON) = quot - 1; /* Set baud rate divisor */ + UR (port, UART_R_FCON) = fcon; /* Set FIFO and frame ctrl */ + UR (port, UART_R_INTEN) = inten; /* Enable interrupts */ + UR (port, UART_R_CON) = con; /* Restore UART mode */ + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char* lh7a40xuart_type (struct uart_port* port) +{ + return port->type == PORT_LH7A40X ? "LH7A40X" : NULL; +} + +static void lh7a40xuart_release_port (struct uart_port* port) +{ + release_mem_region (port->mapbase, UART_REG_SIZE); +} + +static int lh7a40xuart_request_port (struct uart_port* port) +{ + return request_mem_region (port->mapbase, UART_REG_SIZE, + "serial_lh7a40x") != NULL + ? 0 : -EBUSY; +} + +static void lh7a40xuart_config_port (struct uart_port* port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_LH7A40X; + lh7a40xuart_request_port (port); + } +} + +static int lh7a40xuart_verify_port (struct uart_port* port, + struct serial_struct* ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_LH7A40X) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= nr_irqs) + ret = -EINVAL; + if (ser->baud_base < 9600) /* *** FIXME: is this true? */ + ret = -EINVAL; + return ret; +} + +static struct uart_ops lh7a40x_uart_ops = { + .tx_empty = lh7a40xuart_tx_empty, + .set_mctrl = lh7a40xuart_set_mctrl, + .get_mctrl = lh7a40xuart_get_mctrl, + .stop_tx = lh7a40xuart_stop_tx, + .start_tx = lh7a40xuart_start_tx, + .stop_rx = lh7a40xuart_stop_rx, + .enable_ms = lh7a40xuart_enable_ms, + .break_ctl = lh7a40xuart_break_ctl, + .startup = lh7a40xuart_startup, + .shutdown = lh7a40xuart_shutdown, + .set_termios = lh7a40xuart_set_termios, + .type = lh7a40xuart_type, + .release_port = lh7a40xuart_release_port, + .request_port = lh7a40xuart_request_port, + .config_port = lh7a40xuart_config_port, + .verify_port = lh7a40xuart_verify_port, +}; + +static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { + { + .port = { + .membase = (void*) io_p2v (UART1_PHYS), + .mapbase = UART1_PHYS, + .iotype = UPIO_MEM, + .irq = IRQ_UART1INTR, + .uartclk = 14745600/2, + .fifosize = 16, + .ops = &lh7a40x_uart_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + }, + }, + { + .port = { + .membase = (void*) io_p2v (UART2_PHYS), + .mapbase = UART2_PHYS, + .iotype = UPIO_MEM, + .irq = IRQ_UART2INTR, + .uartclk = 14745600/2, + .fifosize = 16, + .ops = &lh7a40x_uart_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 1, + }, + }, + { + .port = { + .membase = (void*) io_p2v (UART3_PHYS), + .mapbase = UART3_PHYS, + .iotype = UPIO_MEM, + .irq = IRQ_UART3INTR, + .uartclk = 14745600/2, + .fifosize = 16, + .ops = &lh7a40x_uart_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 2, + }, + }, +}; + +#ifndef CONFIG_SERIAL_LH7A40X_CONSOLE +# define LH7A40X_CONSOLE NULL +#else +# define LH7A40X_CONSOLE &lh7a40x_console + +static void lh7a40xuart_console_putchar(struct uart_port *port, int ch) +{ + while (UR(port, UART_R_STATUS) & nTxRdy) + ; + UR(port, UART_R_DATA) = ch; +} + +static void lh7a40xuart_console_write (struct console* co, + const char* s, + unsigned int count) +{ + struct uart_port* port = &lh7a40x_ports[co->index].port; + unsigned int con = UR (port, UART_R_CON); + unsigned int inten = UR (port, UART_R_INTEN); + + + UR (port, UART_R_INTEN) = 0; /* Disable all interrupts */ + BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); /* Enable UART */ + + uart_console_write(port, s, count, lh7a40xuart_console_putchar); + + /* Wait until all characters are sent */ + while (UR (port, UART_R_STATUS) & TxBusy) + ; + + /* Restore control and interrupt mask */ + UR (port, UART_R_CON) = con; + UR (port, UART_R_INTEN) = inten; +} + +static void __init lh7a40xuart_console_get_options (struct uart_port* port, + int* baud, + int* parity, + int* bits) +{ + if (UR (port, UART_R_CON) & UARTEN) { + unsigned int fcon = UR (port, UART_R_FCON); + unsigned int quot = UR (port, UART_R_BRCON) + 1; + + switch (fcon & (PEN | EPS)) { + default: *parity = 'n'; break; + case PEN: *parity = 'o'; break; + case PEN | EPS: *parity = 'e'; break; + } + + switch (fcon & WLEN) { + default: + case WLEN_8: *bits = 8; break; + case WLEN_7: *bits = 7; break; + case WLEN_6: *bits = 6; break; + case WLEN_5: *bits = 5; break; + } + + *baud = port->uartclk/(16*quot); + } +} + +static int __init lh7a40xuart_console_setup (struct console* co, char* options) +{ + struct uart_port* port; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index >= DEV_NR) /* Bounds check on device number */ + co->index = 0; + port = &lh7a40x_ports[co->index].port; + + if (options) + uart_parse_options (options, &baud, &parity, &bits, &flow); + else + lh7a40xuart_console_get_options (port, &baud, &parity, &bits); + + return uart_set_options (port, co, baud, parity, bits, flow); +} + +static struct uart_driver lh7a40x_reg; +static struct console lh7a40x_console = { + .name = "ttyAM", + .write = lh7a40xuart_console_write, + .device = uart_console_device, + .setup = lh7a40xuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &lh7a40x_reg, +}; + +static int __init lh7a40xuart_console_init(void) +{ + register_console (&lh7a40x_console); + return 0; +} + +console_initcall (lh7a40xuart_console_init); + +#endif + +static struct uart_driver lh7a40x_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyAM", + .dev_name = "ttyAM", + .major = DEV_MAJOR, + .minor = DEV_MINOR, + .nr = DEV_NR, + .cons = LH7A40X_CONSOLE, +}; + +static int __init lh7a40xuart_init(void) +{ + int ret; + + printk (KERN_INFO "serial: LH7A40X serial driver\n"); + + ret = uart_register_driver (&lh7a40x_reg); + + if (ret == 0) { + int i; + + for (i = 0; i < DEV_NR; i++) { + /* UART3, when used, requires GPIO pin reallocation */ + if (lh7a40x_ports[i].port.mapbase == UART3_PHYS) + GPIO_PINMUX |= 1<<3; + uart_add_one_port (&lh7a40x_reg, + &lh7a40x_ports[i].port); + } + } + return ret; +} + +static void __exit lh7a40xuart_exit(void) +{ + int i; + + for (i = 0; i < DEV_NR; i++) + uart_remove_one_port (&lh7a40x_reg, &lh7a40x_ports[i].port); + + uart_unregister_driver (&lh7a40x_reg); +} + +module_init (lh7a40xuart_init); +module_exit (lh7a40xuart_exit); + +MODULE_AUTHOR ("Marc Singer"); +MODULE_DESCRIPTION ("Sharp LH7A40X serial port driver"); +MODULE_LICENSE ("GPL"); diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c new file mode 100644 index 000000000000..c50e9fbbf743 --- /dev/null +++ b/drivers/tty/serial/serial_txx9.c @@ -0,0 +1,1344 @@ +/* + * drivers/serial/serial_txx9.c + * + * Derived from many drivers using generic_serial interface, + * especially serial_tx3912.c by Steven J. Hill and r39xx_serial.c + * (was in Linux/VR tree) by Jim Pick. + * + * Copyright (C) 1999 Harald Koerfgen + * Copyright (C) 2000 Jim Pick + * Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com) + * Copyright (C) 2000-2002 Toshiba Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller + */ + +#if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +static char *serial_version = "1.11"; +static char *serial_name = "TX39/49 Serial driver"; + +#define PASS_LIMIT 256 + +#if !defined(CONFIG_SERIAL_TXX9_STDSERIAL) +/* "ttyS" is used for standard serial driver */ +#define TXX9_TTY_NAME "ttyTX" +#define TXX9_TTY_MINOR_START 196 +#define TXX9_TTY_MAJOR 204 +#else +/* acts like standard serial driver */ +#define TXX9_TTY_NAME "ttyS" +#define TXX9_TTY_MINOR_START 64 +#define TXX9_TTY_MAJOR TTY_MAJOR +#endif + +/* flag aliases */ +#define UPF_TXX9_HAVE_CTS_LINE UPF_BUGGY_UART +#define UPF_TXX9_USE_SCLK UPF_MAGIC_MULTIPLIER + +#ifdef CONFIG_PCI +/* support for Toshiba TC86C001 SIO */ +#define ENABLE_SERIAL_TXX9_PCI +#endif + +/* + * Number of serial ports + */ +#define UART_NR CONFIG_SERIAL_TXX9_NR_UARTS + +struct uart_txx9_port { + struct uart_port port; + /* No additional info for now */ +}; + +#define TXX9_REGION_SIZE 0x24 + +/* TXX9 Serial Registers */ +#define TXX9_SILCR 0x00 +#define TXX9_SIDICR 0x04 +#define TXX9_SIDISR 0x08 +#define TXX9_SICISR 0x0c +#define TXX9_SIFCR 0x10 +#define TXX9_SIFLCR 0x14 +#define TXX9_SIBGR 0x18 +#define TXX9_SITFIFO 0x1c +#define TXX9_SIRFIFO 0x20 + +/* SILCR : Line Control */ +#define TXX9_SILCR_SCS_MASK 0x00000060 +#define TXX9_SILCR_SCS_IMCLK 0x00000000 +#define TXX9_SILCR_SCS_IMCLK_BG 0x00000020 +#define TXX9_SILCR_SCS_SCLK 0x00000040 +#define TXX9_SILCR_SCS_SCLK_BG 0x00000060 +#define TXX9_SILCR_UEPS 0x00000010 +#define TXX9_SILCR_UPEN 0x00000008 +#define TXX9_SILCR_USBL_MASK 0x00000004 +#define TXX9_SILCR_USBL_1BIT 0x00000000 +#define TXX9_SILCR_USBL_2BIT 0x00000004 +#define TXX9_SILCR_UMODE_MASK 0x00000003 +#define TXX9_SILCR_UMODE_8BIT 0x00000000 +#define TXX9_SILCR_UMODE_7BIT 0x00000001 + +/* SIDICR : DMA/Int. Control */ +#define TXX9_SIDICR_TDE 0x00008000 +#define TXX9_SIDICR_RDE 0x00004000 +#define TXX9_SIDICR_TIE 0x00002000 +#define TXX9_SIDICR_RIE 0x00001000 +#define TXX9_SIDICR_SPIE 0x00000800 +#define TXX9_SIDICR_CTSAC 0x00000600 +#define TXX9_SIDICR_STIE_MASK 0x0000003f +#define TXX9_SIDICR_STIE_OERS 0x00000020 +#define TXX9_SIDICR_STIE_CTSS 0x00000010 +#define TXX9_SIDICR_STIE_RBRKD 0x00000008 +#define TXX9_SIDICR_STIE_TRDY 0x00000004 +#define TXX9_SIDICR_STIE_TXALS 0x00000002 +#define TXX9_SIDICR_STIE_UBRKD 0x00000001 + +/* SIDISR : DMA/Int. Status */ +#define TXX9_SIDISR_UBRK 0x00008000 +#define TXX9_SIDISR_UVALID 0x00004000 +#define TXX9_SIDISR_UFER 0x00002000 +#define TXX9_SIDISR_UPER 0x00001000 +#define TXX9_SIDISR_UOER 0x00000800 +#define TXX9_SIDISR_ERI 0x00000400 +#define TXX9_SIDISR_TOUT 0x00000200 +#define TXX9_SIDISR_TDIS 0x00000100 +#define TXX9_SIDISR_RDIS 0x00000080 +#define TXX9_SIDISR_STIS 0x00000040 +#define TXX9_SIDISR_RFDN_MASK 0x0000001f + +/* SICISR : Change Int. Status */ +#define TXX9_SICISR_OERS 0x00000020 +#define TXX9_SICISR_CTSS 0x00000010 +#define TXX9_SICISR_RBRKD 0x00000008 +#define TXX9_SICISR_TRDY 0x00000004 +#define TXX9_SICISR_TXALS 0x00000002 +#define TXX9_SICISR_UBRKD 0x00000001 + +/* SIFCR : FIFO Control */ +#define TXX9_SIFCR_SWRST 0x00008000 +#define TXX9_SIFCR_RDIL_MASK 0x00000180 +#define TXX9_SIFCR_RDIL_1 0x00000000 +#define TXX9_SIFCR_RDIL_4 0x00000080 +#define TXX9_SIFCR_RDIL_8 0x00000100 +#define TXX9_SIFCR_RDIL_12 0x00000180 +#define TXX9_SIFCR_RDIL_MAX 0x00000180 +#define TXX9_SIFCR_TDIL_MASK 0x00000018 +#define TXX9_SIFCR_TDIL_MASK 0x00000018 +#define TXX9_SIFCR_TDIL_1 0x00000000 +#define TXX9_SIFCR_TDIL_4 0x00000001 +#define TXX9_SIFCR_TDIL_8 0x00000010 +#define TXX9_SIFCR_TDIL_MAX 0x00000010 +#define TXX9_SIFCR_TFRST 0x00000004 +#define TXX9_SIFCR_RFRST 0x00000002 +#define TXX9_SIFCR_FRSTE 0x00000001 +#define TXX9_SIO_TX_FIFO 8 +#define TXX9_SIO_RX_FIFO 16 + +/* SIFLCR : Flow Control */ +#define TXX9_SIFLCR_RCS 0x00001000 +#define TXX9_SIFLCR_TES 0x00000800 +#define TXX9_SIFLCR_RTSSC 0x00000200 +#define TXX9_SIFLCR_RSDE 0x00000100 +#define TXX9_SIFLCR_TSDE 0x00000080 +#define TXX9_SIFLCR_RTSTL_MASK 0x0000001e +#define TXX9_SIFLCR_RTSTL_MAX 0x0000001e +#define TXX9_SIFLCR_TBRK 0x00000001 + +/* SIBGR : Baudrate Control */ +#define TXX9_SIBGR_BCLK_MASK 0x00000300 +#define TXX9_SIBGR_BCLK_T0 0x00000000 +#define TXX9_SIBGR_BCLK_T2 0x00000100 +#define TXX9_SIBGR_BCLK_T4 0x00000200 +#define TXX9_SIBGR_BCLK_T6 0x00000300 +#define TXX9_SIBGR_BRD_MASK 0x000000ff + +static inline unsigned int sio_in(struct uart_txx9_port *up, int offset) +{ + switch (up->port.iotype) { + default: + return __raw_readl(up->port.membase + offset); + case UPIO_PORT: + return inl(up->port.iobase + offset); + } +} + +static inline void +sio_out(struct uart_txx9_port *up, int offset, int value) +{ + switch (up->port.iotype) { + default: + __raw_writel(value, up->port.membase + offset); + break; + case UPIO_PORT: + outl(value, up->port.iobase + offset); + break; + } +} + +static inline void +sio_mask(struct uart_txx9_port *up, int offset, unsigned int value) +{ + sio_out(up, offset, sio_in(up, offset) & ~value); +} +static inline void +sio_set(struct uart_txx9_port *up, int offset, unsigned int value) +{ + sio_out(up, offset, sio_in(up, offset) | value); +} + +static inline void +sio_quot_set(struct uart_txx9_port *up, int quot) +{ + quot >>= 1; + if (quot < 256) + sio_out(up, TXX9_SIBGR, quot | TXX9_SIBGR_BCLK_T0); + else if (quot < (256 << 2)) + sio_out(up, TXX9_SIBGR, (quot >> 2) | TXX9_SIBGR_BCLK_T2); + else if (quot < (256 << 4)) + sio_out(up, TXX9_SIBGR, (quot >> 4) | TXX9_SIBGR_BCLK_T4); + else if (quot < (256 << 6)) + sio_out(up, TXX9_SIBGR, (quot >> 6) | TXX9_SIBGR_BCLK_T6); + else + sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6); +} + +static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port) +{ + return container_of(port, struct uart_txx9_port, port); +} + +static void serial_txx9_stop_tx(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE); +} + +static void serial_txx9_start_tx(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE); +} + +static void serial_txx9_stop_rx(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + up->port.read_status_mask &= ~TXX9_SIDISR_RDIS; +} + +static void serial_txx9_enable_ms(struct uart_port *port) +{ + /* TXX9-SIO can not control DTR... */ +} + +static void serial_txx9_initialize(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned int tmout = 10000; + + sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST); + /* TX4925 BUG WORKAROUND. Accessing SIOC register + * immediately after soft reset causes bus error. */ + mmiowb(); + udelay(1); + while ((sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST) && --tmout) + udelay(1); + /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ + sio_set(up, TXX9_SIFCR, + TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1); + /* initial settings */ + sio_out(up, TXX9_SILCR, + TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT | + ((up->port.flags & UPF_TXX9_USE_SCLK) ? + TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG)); + sio_quot_set(up, uart_get_divisor(port, 9600)); + sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */); + sio_out(up, TXX9_SIDICR, 0); +} + +static inline void +receive_chars(struct uart_txx9_port *up, unsigned int *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned char ch; + unsigned int disr = *status; + int max_count = 256; + char flag; + unsigned int next_ignore_status_mask; + + do { + ch = sio_in(up, TXX9_SIRFIFO); + flag = TTY_NORMAL; + up->port.icount.rx++; + + /* mask out RFDN_MASK bit added by previous overrun */ + next_ignore_status_mask = + up->port.ignore_status_mask & ~TXX9_SIDISR_RFDN_MASK; + if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER | + TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) { + /* + * For statistics only + */ + if (disr & TXX9_SIDISR_UBRK) { + disr &= ~(TXX9_SIDISR_UFER | TXX9_SIDISR_UPER); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (disr & TXX9_SIDISR_UPER) + up->port.icount.parity++; + else if (disr & TXX9_SIDISR_UFER) + up->port.icount.frame++; + if (disr & TXX9_SIDISR_UOER) { + up->port.icount.overrun++; + /* + * The receiver read buffer still hold + * a char which caused overrun. + * Ignore next char by adding RFDN_MASK + * to ignore_status_mask temporarily. + */ + next_ignore_status_mask |= + TXX9_SIDISR_RFDN_MASK; + } + + /* + * Mask off conditions which should be ingored. + */ + disr &= up->port.read_status_mask; + + if (disr & TXX9_SIDISR_UBRK) { + flag = TTY_BREAK; + } else if (disr & TXX9_SIDISR_UPER) + flag = TTY_PARITY; + else if (disr & TXX9_SIDISR_UFER) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + + uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag); + + ignore_char: + up->port.ignore_status_mask = next_ignore_status_mask; + disr = sio_in(up, TXX9_SIDISR); + } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0)); + spin_unlock(&up->port.lock); + tty_flip_buffer_push(tty); + spin_lock(&up->port.lock); + *status = disr; +} + +static inline void transmit_chars(struct uart_txx9_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + sio_out(up, TXX9_SITFIFO, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_txx9_stop_tx(&up->port); + return; + } + + count = TXX9_SIO_TX_FIFO; + do { + sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + serial_txx9_stop_tx(&up->port); +} + +static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id) +{ + int pass_counter = 0; + struct uart_txx9_port *up = dev_id; + unsigned int status; + + while (1) { + spin_lock(&up->port.lock); + status = sio_in(up, TXX9_SIDISR); + if (!(sio_in(up, TXX9_SIDICR) & TXX9_SIDICR_TIE)) + status &= ~TXX9_SIDISR_TDIS; + if (!(status & (TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | + TXX9_SIDISR_TOUT))) { + spin_unlock(&up->port.lock); + break; + } + + if (status & TXX9_SIDISR_RDIS) + receive_chars(up, &status); + if (status & TXX9_SIDISR_TDIS) + transmit_chars(up); + /* Clear TX/RX Int. Status */ + sio_mask(up, TXX9_SIDISR, + TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | + TXX9_SIDISR_TOUT); + spin_unlock(&up->port.lock); + + if (pass_counter++ > PASS_LIMIT) + break; + } + + return pass_counter ? IRQ_HANDLED : IRQ_NONE; +} + +static unsigned int serial_txx9_tx_empty(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = (sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS) ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_txx9_get_mctrl(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned int ret; + + /* no modem control lines */ + ret = TIOCM_CAR | TIOCM_DSR; + ret |= (sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS; + ret |= (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS; + + return ret; +} + +static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + + if (mctrl & TIOCM_RTS) + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); + else + sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); +} + +static void serial_txx9_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); + else + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL) +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct uart_txx9_port *up) +{ + unsigned int tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + while (--tmout && + !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS)) + udelay(1); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS)) + udelay(1); + } +} +#endif + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int serial_txx9_get_poll_char(struct uart_port *port) +{ + unsigned int ier; + unsigned char c; + struct uart_txx9_port *up = to_uart_txx9_port(port); + + /* + * First save the IER then disable the interrupts + */ + ier = sio_in(up, TXX9_SIDICR); + sio_out(up, TXX9_SIDICR, 0); + + while (sio_in(up, TXX9_SIDISR) & TXX9_SIDISR_UVALID) + ; + + c = sio_in(up, TXX9_SIRFIFO); + + /* + * Finally, clear RX interrupt status + * and restore the IER + */ + sio_mask(up, TXX9_SIDISR, TXX9_SIDISR_RDIS); + sio_out(up, TXX9_SIDICR, ier); + return c; +} + + +static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c) +{ + unsigned int ier; + struct uart_txx9_port *up = to_uart_txx9_port(port); + + /* + * First save the IER then disable the interrupts + */ + ier = sio_in(up, TXX9_SIDICR); + sio_out(up, TXX9_SIDICR, 0); + + wait_for_xmitr(up); + /* + * Send the character out. + * If a LF, also do CR... + */ + sio_out(up, TXX9_SITFIFO, c); + if (c == 10) { + wait_for_xmitr(up); + sio_out(up, TXX9_SITFIFO, 13); + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + sio_out(up, TXX9_SIDICR, ier); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static int serial_txx9_startup(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned long flags; + int retval; + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + sio_set(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + /* clear reset */ + sio_mask(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + sio_out(up, TXX9_SIDICR, 0); + + /* + * Clear the interrupt registers. + */ + sio_out(up, TXX9_SIDISR, 0); + + retval = request_irq(up->port.irq, serial_txx9_interrupt, + IRQF_SHARED, "serial_txx9", up); + if (retval) + return retval; + + /* + * Now, initialize the UART + */ + spin_lock_irqsave(&up->port.lock, flags); + serial_txx9_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* Enable RX/TX */ + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); + + /* + * Finally, enable interrupts. + */ + sio_set(up, TXX9_SIDICR, TXX9_SIDICR_RIE); + + return 0; +} + +static void serial_txx9_shutdown(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned long flags; + + /* + * Disable interrupts from this port + */ + sio_out(up, TXX9_SIDICR, 0); /* disable all intrs */ + + spin_lock_irqsave(&up->port.lock, flags); + serial_txx9_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition + */ + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); + +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + if (up->port.cons && up->port.line == up->port.cons->index) { + free_irq(up->port.irq, up); + return; + } +#endif + /* reset FIFOs */ + sio_set(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + /* clear reset */ + sio_mask(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + + /* Disable RX/TX */ + sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); + + free_irq(up->port.irq, up); +} + +static void +serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + unsigned int cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + + /* + * We don't support modem control lines. + */ + termios->c_cflag &= ~(HUPCL | CMSPAR); + termios->c_cflag |= CLOCAL; + + cval = sio_in(up, TXX9_SILCR); + /* byte size and parity */ + cval &= ~TXX9_SILCR_UMODE_MASK; + switch (termios->c_cflag & CSIZE) { + case CS7: + cval |= TXX9_SILCR_UMODE_7BIT; + break; + default: + case CS5: /* not supported */ + case CS6: /* not supported */ + case CS8: + cval |= TXX9_SILCR_UMODE_8BIT; + break; + } + + cval &= ~TXX9_SILCR_USBL_MASK; + if (termios->c_cflag & CSTOPB) + cval |= TXX9_SILCR_USBL_2BIT; + else + cval |= TXX9_SILCR_USBL_1BIT; + cval &= ~(TXX9_SILCR_UPEN | TXX9_SILCR_UEPS); + if (termios->c_cflag & PARENB) + cval |= TXX9_SILCR_UPEN; + if (!(termios->c_cflag & PARODD)) + cval |= TXX9_SILCR_UEPS; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16/2); + quot = uart_get_divisor(port, baud); + + /* Set up FIFOs */ + /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ + fcr = TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = TXX9_SIDISR_UOER | + TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= TXX9_SIDISR_UBRK; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= TXX9_SIDISR_UBRK; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= TXX9_SIDISR_UOER; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= TXX9_SIDISR_RDIS; + + /* CTS flow control flag */ + if ((termios->c_cflag & CRTSCTS) && + (up->port.flags & UPF_TXX9_HAVE_CTS_LINE)) { + sio_set(up, TXX9_SIFLCR, + TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); + } else { + sio_mask(up, TXX9_SIFLCR, + TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); + } + + sio_out(up, TXX9_SILCR, cval); + sio_quot_set(up, quot); + sio_out(up, TXX9_SIFCR, fcr); + + serial_txx9_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +serial_txx9_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + /* + * If oldstate was -1 this is called from + * uart_configure_port(). In this case do not initialize the + * port now, because the port was already initialized (for + * non-console port) or should not be initialized here (for + * console port). If we initialized the port here we lose + * serial console settings. + */ + if (state == 0 && oldstate != -1) + serial_txx9_initialize(port); +} + +static int serial_txx9_request_resource(struct uart_txx9_port *up) +{ + unsigned int size = TXX9_REGION_SIZE; + int ret = 0; + + switch (up->port.iotype) { + default: + if (!up->port.mapbase) + break; + + if (!request_mem_region(up->port.mapbase, size, "serial_txx9")) { + ret = -EBUSY; + break; + } + + if (up->port.flags & UPF_IOREMAP) { + up->port.membase = ioremap(up->port.mapbase, size); + if (!up->port.membase) { + release_mem_region(up->port.mapbase, size); + ret = -ENOMEM; + } + } + break; + + case UPIO_PORT: + if (!request_region(up->port.iobase, size, "serial_txx9")) + ret = -EBUSY; + break; + } + return ret; +} + +static void serial_txx9_release_resource(struct uart_txx9_port *up) +{ + unsigned int size = TXX9_REGION_SIZE; + + switch (up->port.iotype) { + default: + if (!up->port.mapbase) + break; + + if (up->port.flags & UPF_IOREMAP) { + iounmap(up->port.membase); + up->port.membase = NULL; + } + + release_mem_region(up->port.mapbase, size); + break; + + case UPIO_PORT: + release_region(up->port.iobase, size); + break; + } +} + +static void serial_txx9_release_port(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + serial_txx9_release_resource(up); +} + +static int serial_txx9_request_port(struct uart_port *port) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + return serial_txx9_request_resource(up); +} + +static void serial_txx9_config_port(struct uart_port *port, int uflags) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + int ret; + + /* + * Find the region that we can probe for. This in turn + * tells us whether we can probe for the type of port. + */ + ret = serial_txx9_request_resource(up); + if (ret < 0) + return; + port->type = PORT_TXX9; + up->port.fifosize = TXX9_SIO_TX_FIFO; + +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + if (up->port.line == up->port.cons->index) + return; +#endif + serial_txx9_initialize(port); +} + +static const char * +serial_txx9_type(struct uart_port *port) +{ + return "txx9"; +} + +static struct uart_ops serial_txx9_pops = { + .tx_empty = serial_txx9_tx_empty, + .set_mctrl = serial_txx9_set_mctrl, + .get_mctrl = serial_txx9_get_mctrl, + .stop_tx = serial_txx9_stop_tx, + .start_tx = serial_txx9_start_tx, + .stop_rx = serial_txx9_stop_rx, + .enable_ms = serial_txx9_enable_ms, + .break_ctl = serial_txx9_break_ctl, + .startup = serial_txx9_startup, + .shutdown = serial_txx9_shutdown, + .set_termios = serial_txx9_set_termios, + .pm = serial_txx9_pm, + .type = serial_txx9_type, + .release_port = serial_txx9_release_port, + .request_port = serial_txx9_request_port, + .config_port = serial_txx9_config_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = serial_txx9_get_poll_char, + .poll_put_char = serial_txx9_put_poll_char, +#endif +}; + +static struct uart_txx9_port serial_txx9_ports[UART_NR]; + +static void __init serial_txx9_register_ports(struct uart_driver *drv, + struct device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + up->port.line = i; + up->port.ops = &serial_txx9_pops; + up->port.dev = dev; + if (up->port.iobase || up->port.mapbase) + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + +static void serial_txx9_console_putchar(struct uart_port *port, int ch) +{ + struct uart_txx9_port *up = to_uart_txx9_port(port); + + wait_for_xmitr(up); + sio_out(up, TXX9_SITFIFO, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial_txx9_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_txx9_port *up = &serial_txx9_ports[co->index]; + unsigned int ier, flcr; + + /* + * First save the UER then disable the interrupts + */ + ier = sio_in(up, TXX9_SIDICR); + sio_out(up, TXX9_SIDICR, 0); + /* + * Disable flow-control if enabled (and unnecessary) + */ + flcr = sio_in(up, TXX9_SIFLCR); + if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES)) + sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES); + + uart_console_write(&up->port, s, count, serial_txx9_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + sio_out(up, TXX9_SIFLCR, flcr); + sio_out(up, TXX9_SIDICR, ier); +} + +static int __init serial_txx9_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + struct uart_txx9_port *up; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + up = &serial_txx9_ports[co->index]; + port = &up->port; + if (!port->ops) + return -ENODEV; + + serial_txx9_initialize(&up->port); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver serial_txx9_reg; +static struct console serial_txx9_console = { + .name = TXX9_TTY_NAME, + .write = serial_txx9_console_write, + .device = uart_console_device, + .setup = serial_txx9_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_txx9_reg, +}; + +static int __init serial_txx9_console_init(void) +{ + register_console(&serial_txx9_console); + return 0; +} +console_initcall(serial_txx9_console_init); + +#define SERIAL_TXX9_CONSOLE &serial_txx9_console +#else +#define SERIAL_TXX9_CONSOLE NULL +#endif + +static struct uart_driver serial_txx9_reg = { + .owner = THIS_MODULE, + .driver_name = "serial_txx9", + .dev_name = TXX9_TTY_NAME, + .major = TXX9_TTY_MAJOR, + .minor = TXX9_TTY_MINOR_START, + .nr = UART_NR, + .cons = SERIAL_TXX9_CONSOLE, +}; + +int __init early_serial_txx9_setup(struct uart_port *port) +{ + if (port->line >= ARRAY_SIZE(serial_txx9_ports)) + return -ENODEV; + + serial_txx9_ports[port->line].port = *port; + serial_txx9_ports[port->line].port.ops = &serial_txx9_pops; + serial_txx9_ports[port->line].port.flags |= + UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; + return 0; +} + +static DEFINE_MUTEX(serial_txx9_mutex); + +/** + * serial_txx9_register_port - register a serial port + * @port: serial port template + * + * Configure the serial port specified by the request. + * + * The port is then probed and if necessary the IRQ is autodetected + * If this fails an error is returned. + * + * On success the port is ready to use and the line number is returned. + */ +static int __devinit serial_txx9_register_port(struct uart_port *port) +{ + int i; + struct uart_txx9_port *uart; + int ret = -ENOSPC; + + mutex_lock(&serial_txx9_mutex); + for (i = 0; i < UART_NR; i++) { + uart = &serial_txx9_ports[i]; + if (uart_match_port(&uart->port, port)) { + uart_remove_one_port(&serial_txx9_reg, &uart->port); + break; + } + } + if (i == UART_NR) { + /* Find unused port */ + for (i = 0; i < UART_NR; i++) { + uart = &serial_txx9_ports[i]; + if (!(uart->port.iobase || uart->port.mapbase)) + break; + } + } + if (i < UART_NR) { + uart->port.iobase = port->iobase; + uart->port.membase = port->membase; + uart->port.irq = port->irq; + uart->port.uartclk = port->uartclk; + uart->port.iotype = port->iotype; + uart->port.flags = port->flags + | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; + uart->port.mapbase = port->mapbase; + if (port->dev) + uart->port.dev = port->dev; + ret = uart_add_one_port(&serial_txx9_reg, &uart->port); + if (ret == 0) + ret = uart->port.line; + } + mutex_unlock(&serial_txx9_mutex); + return ret; +} + +/** + * serial_txx9_unregister_port - remove a txx9 serial port at runtime + * @line: serial line number + * + * Remove one serial port. This may not be called from interrupt + * context. We hand the port back to the our control. + */ +static void __devexit serial_txx9_unregister_port(int line) +{ + struct uart_txx9_port *uart = &serial_txx9_ports[line]; + + mutex_lock(&serial_txx9_mutex); + uart_remove_one_port(&serial_txx9_reg, &uart->port); + uart->port.flags = 0; + uart->port.type = PORT_UNKNOWN; + uart->port.iobase = 0; + uart->port.mapbase = 0; + uart->port.membase = NULL; + uart->port.dev = NULL; + mutex_unlock(&serial_txx9_mutex); +} + +/* + * Register a set of serial devices attached to a platform device. + */ +static int __devinit serial_txx9_probe(struct platform_device *dev) +{ + struct uart_port *p = dev->dev.platform_data; + struct uart_port port; + int ret, i; + + memset(&port, 0, sizeof(struct uart_port)); + for (i = 0; p && p->uartclk != 0; p++, i++) { + port.iobase = p->iobase; + port.membase = p->membase; + port.irq = p->irq; + port.uartclk = p->uartclk; + port.iotype = p->iotype; + port.flags = p->flags; + port.mapbase = p->mapbase; + port.dev = &dev->dev; + ret = serial_txx9_register_port(&port); + if (ret < 0) { + dev_err(&dev->dev, "unable to register port at index %d " + "(IO%lx MEM%llx IRQ%d): %d\n", i, + p->iobase, (unsigned long long)p->mapbase, + p->irq, ret); + } + } + return 0; +} + +/* + * Remove serial ports registered against a platform device. + */ +static int __devexit serial_txx9_remove(struct platform_device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + if (up->port.dev == &dev->dev) + serial_txx9_unregister_port(i); + } + return 0; +} + +#ifdef CONFIG_PM +static int serial_txx9_suspend(struct platform_device *dev, pm_message_t state) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + uart_suspend_port(&serial_txx9_reg, &up->port); + } + + return 0; +} + +static int serial_txx9_resume(struct platform_device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) + uart_resume_port(&serial_txx9_reg, &up->port); + } + + return 0; +} +#endif + +static struct platform_driver serial_txx9_plat_driver = { + .probe = serial_txx9_probe, + .remove = __devexit_p(serial_txx9_remove), +#ifdef CONFIG_PM + .suspend = serial_txx9_suspend, + .resume = serial_txx9_resume, +#endif + .driver = { + .name = "serial_txx9", + .owner = THIS_MODULE, + }, +}; + +#ifdef ENABLE_SERIAL_TXX9_PCI +/* + * Probe one serial board. Unfortunately, there is no rhyme nor reason + * to the arrangement of serial ports on a PCI card. + */ +static int __devinit +pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct uart_port port; + int line; + int rc; + + rc = pci_enable_device(dev); + if (rc) + return rc; + + memset(&port, 0, sizeof(port)); + port.ops = &serial_txx9_pops; + port.flags |= UPF_TXX9_HAVE_CTS_LINE; + port.uartclk = 66670000; + port.irq = dev->irq; + port.iotype = UPIO_PORT; + port.iobase = pci_resource_start(dev, 1); + port.dev = &dev->dev; + line = serial_txx9_register_port(&port); + if (line < 0) { + printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line); + pci_disable_device(dev); + return line; + } + pci_set_drvdata(dev, &serial_txx9_ports[line]); + + return 0; +} + +static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev) +{ + struct uart_txx9_port *up = pci_get_drvdata(dev); + + pci_set_drvdata(dev, NULL); + + if (up) { + serial_txx9_unregister_port(up->port.line); + pci_disable_device(dev); + } +} + +#ifdef CONFIG_PM +static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state) +{ + struct uart_txx9_port *up = pci_get_drvdata(dev); + + if (up) + uart_suspend_port(&serial_txx9_reg, &up->port); + pci_save_state(dev); + pci_set_power_state(dev, pci_choose_state(dev, state)); + return 0; +} + +static int pciserial_txx9_resume_one(struct pci_dev *dev) +{ + struct uart_txx9_port *up = pci_get_drvdata(dev); + + pci_set_power_state(dev, PCI_D0); + pci_restore_state(dev); + if (up) + uart_resume_port(&serial_txx9_reg, &up->port); + return 0; +} +#endif + +static const struct pci_device_id serial_txx9_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC) }, + { 0, } +}; + +static struct pci_driver serial_txx9_pci_driver = { + .name = "serial_txx9", + .probe = pciserial_txx9_init_one, + .remove = __devexit_p(pciserial_txx9_remove_one), +#ifdef CONFIG_PM + .suspend = pciserial_txx9_suspend_one, + .resume = pciserial_txx9_resume_one, +#endif + .id_table = serial_txx9_pci_tbl, +}; + +MODULE_DEVICE_TABLE(pci, serial_txx9_pci_tbl); +#endif /* ENABLE_SERIAL_TXX9_PCI */ + +static struct platform_device *serial_txx9_plat_devs; + +static int __init serial_txx9_init(void) +{ + int ret; + + printk(KERN_INFO "%s version %s\n", serial_name, serial_version); + + ret = uart_register_driver(&serial_txx9_reg); + if (ret) + goto out; + + serial_txx9_plat_devs = platform_device_alloc("serial_txx9", -1); + if (!serial_txx9_plat_devs) { + ret = -ENOMEM; + goto unreg_uart_drv; + } + + ret = platform_device_add(serial_txx9_plat_devs); + if (ret) + goto put_dev; + + serial_txx9_register_ports(&serial_txx9_reg, + &serial_txx9_plat_devs->dev); + + ret = platform_driver_register(&serial_txx9_plat_driver); + if (ret) + goto del_dev; + +#ifdef ENABLE_SERIAL_TXX9_PCI + ret = pci_register_driver(&serial_txx9_pci_driver); +#endif + if (ret == 0) + goto out; + + del_dev: + platform_device_del(serial_txx9_plat_devs); + put_dev: + platform_device_put(serial_txx9_plat_devs); + unreg_uart_drv: + uart_unregister_driver(&serial_txx9_reg); + out: + return ret; +} + +static void __exit serial_txx9_exit(void) +{ + int i; + +#ifdef ENABLE_SERIAL_TXX9_PCI + pci_unregister_driver(&serial_txx9_pci_driver); +#endif + platform_driver_unregister(&serial_txx9_plat_driver); + platform_device_unregister(serial_txx9_plat_devs); + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + if (up->port.iobase || up->port.mapbase) + uart_remove_one_port(&serial_txx9_reg, &up->port); + } + + uart_unregister_driver(&serial_txx9_reg); +} + +module_init(serial_txx9_init); +module_exit(serial_txx9_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("TX39/49 serial driver"); + +MODULE_ALIAS_CHARDEV_MAJOR(TXX9_TTY_MAJOR); diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c new file mode 100644 index 000000000000..c291b3add1d2 --- /dev/null +++ b/drivers/tty/serial/sh-sci.c @@ -0,0 +1,2027 @@ +/* + * drivers/serial/sh-sci.c + * + * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) + * + * Copyright (C) 2002 - 2008 Paul Mundt + * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007). + * + * based off of the old drivers/char/sh-sci.c by: + * + * Copyright (C) 1999, 2000 Niibe Yutaka + * Copyright (C) 2000 Sugioka Toshinobu + * Modified to support multiple serial ports. Stuart Menefy (May 2000). + * Modified to support SecureEdge. David McCullough (2002) + * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003). + * Removed SH7300 support (Jul 2007). + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_SUPERH +#include +#endif + +#ifdef CONFIG_H8300 +#include +#endif + +#include "sh-sci.h" + +struct sci_port { + struct uart_port port; + + /* Port type */ + unsigned int type; + + /* Port IRQs: ERI, RXI, TXI, BRI (optional) */ + unsigned int irqs[SCIx_NR_IRQS]; + + /* Port enable callback */ + void (*enable)(struct uart_port *port); + + /* Port disable callback */ + void (*disable)(struct uart_port *port); + + /* Break timer */ + struct timer_list break_timer; + int break_flag; + + /* Interface clock */ + struct clk *iclk; + /* Function clock */ + struct clk *fclk; + + struct list_head node; + struct dma_chan *chan_tx; + struct dma_chan *chan_rx; +#ifdef CONFIG_SERIAL_SH_SCI_DMA + struct device *dma_dev; + unsigned int slave_tx; + unsigned int slave_rx; + struct dma_async_tx_descriptor *desc_tx; + struct dma_async_tx_descriptor *desc_rx[2]; + dma_cookie_t cookie_tx; + dma_cookie_t cookie_rx[2]; + dma_cookie_t active_rx; + struct scatterlist sg_tx; + unsigned int sg_len_tx; + struct scatterlist sg_rx[2]; + size_t buf_len_rx; + struct sh_dmae_slave param_tx; + struct sh_dmae_slave param_rx; + struct work_struct work_tx; + struct work_struct work_rx; + struct timer_list rx_timer; + unsigned int rx_timeout; +#endif +}; + +struct sh_sci_priv { + spinlock_t lock; + struct list_head ports; + struct notifier_block clk_nb; +}; + +/* Function prototypes */ +static void sci_stop_tx(struct uart_port *port); + +#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS + +static struct sci_port sci_ports[SCI_NPORTS]; +static struct uart_driver sci_uart_driver; + +static inline struct sci_port * +to_sci_port(struct uart_port *uart) +{ + return container_of(uart, struct sci_port, port); +} + +#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) + +#ifdef CONFIG_CONSOLE_POLL +static inline void handle_error(struct uart_port *port) +{ + /* Clear error flags */ + sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); +} + +static int sci_poll_get_char(struct uart_port *port) +{ + unsigned short status; + int c; + + do { + status = sci_in(port, SCxSR); + if (status & SCxSR_ERRORS(port)) { + handle_error(port); + continue; + } + break; + } while (1); + + if (!(status & SCxSR_RDxF(port))) + return NO_POLL_CHAR; + + c = sci_in(port, SCxRDR); + + /* Dummy read */ + sci_in(port, SCxSR); + sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + + return c; +} +#endif + +static void sci_poll_put_char(struct uart_port *port, unsigned char c) +{ + unsigned short status; + + do { + status = sci_in(port, SCxSR); + } while (!(status & SCxSR_TDxE(port))); + + sci_out(port, SCxTDR, c); + sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port)); +} +#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ + +#if defined(__H8300H__) || defined(__H8300S__) +static void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + int ch = (port->mapbase - SMR0) >> 3; + + /* set DDR regs */ + H8300_GPIO_DDR(h8300_sci_pins[ch].port, + h8300_sci_pins[ch].rx, + H8300_GPIO_INPUT); + H8300_GPIO_DDR(h8300_sci_pins[ch].port, + h8300_sci_pins[ch].tx, + H8300_GPIO_OUTPUT); + + /* tx mark output*/ + H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx; +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) +static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + if (port->mapbase == 0xA4400000) { + __raw_writew(__raw_readw(PACR) & 0xffc0, PACR); + __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR); + } else if (port->mapbase == 0xA4410000) + __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR); +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721) +static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + unsigned short data; + + if (cflag & CRTSCTS) { + /* enable RTS/CTS */ + if (port->mapbase == 0xa4430000) { /* SCIF0 */ + /* Clear PTCR bit 9-2; enable all scif pins but sck */ + data = __raw_readw(PORT_PTCR); + __raw_writew((data & 0xfc03), PORT_PTCR); + } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ + /* Clear PVCR bit 9-2 */ + data = __raw_readw(PORT_PVCR); + __raw_writew((data & 0xfc03), PORT_PVCR); + } + } else { + if (port->mapbase == 0xa4430000) { /* SCIF0 */ + /* Clear PTCR bit 5-2; enable only tx and rx */ + data = __raw_readw(PORT_PTCR); + __raw_writew((data & 0xffc3), PORT_PTCR); + } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ + /* Clear PVCR bit 5-2 */ + data = __raw_readw(PORT_PVCR); + __raw_writew((data & 0xffc3), PORT_PVCR); + } + } +} +#elif defined(CONFIG_CPU_SH3) +/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */ +static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + unsigned short data; + + /* We need to set SCPCR to enable RTS/CTS */ + data = __raw_readw(SCPCR); + /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/ + __raw_writew(data & 0x0fcf, SCPCR); + + if (!(cflag & CRTSCTS)) { + /* We need to set SCPCR to enable RTS/CTS */ + data = __raw_readw(SCPCR); + /* Clear out SCP7MD1,0, SCP4MD1,0, + Set SCP6MD1,0 = {01} (output) */ + __raw_writew((data & 0x0fcf) | 0x1000, SCPCR); + + data = __raw_readb(SCPDR); + /* Set /RTS2 (bit6) = 0 */ + __raw_writeb(data & 0xbf, SCPDR); + } +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7722) +static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + unsigned short data; + + if (port->mapbase == 0xffe00000) { + data = __raw_readw(PSCR); + data &= ~0x03cf; + if (!(cflag & CRTSCTS)) + data |= 0x0340; + + __raw_writew(data, PSCR); + } +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \ + defined(CONFIG_CPU_SUBTYPE_SH7763) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) || \ + defined(CONFIG_CPU_SUBTYPE_SHX3) +static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + if (!(cflag & CRTSCTS)) + __raw_writew(0x0080, SCSPTR0); /* Set RTS = 1 */ +} +#elif defined(CONFIG_CPU_SH4) && !defined(CONFIG_CPU_SH4A) +static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + if (!(cflag & CRTSCTS)) + __raw_writew(0x0080, SCSPTR2); /* Set RTS = 1 */ +} +#else +static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + /* Nothing to do */ +} +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) +static int scif_txfill(struct uart_port *port) +{ + return sci_in(port, SCTFDR) & 0xff; +} + +static int scif_txroom(struct uart_port *port) +{ + return SCIF_TXROOM_MAX - scif_txfill(port); +} + +static int scif_rxfill(struct uart_port *port) +{ + return sci_in(port, SCRFDR) & 0xff; +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) +static int scif_txfill(struct uart_port *port) +{ + if (port->mapbase == 0xffe00000 || + port->mapbase == 0xffe08000) + /* SCIF0/1*/ + return sci_in(port, SCTFDR) & 0xff; + else + /* SCIF2 */ + return sci_in(port, SCFDR) >> 8; +} + +static int scif_txroom(struct uart_port *port) +{ + if (port->mapbase == 0xffe00000 || + port->mapbase == 0xffe08000) + /* SCIF0/1*/ + return SCIF_TXROOM_MAX - scif_txfill(port); + else + /* SCIF2 */ + return SCIF2_TXROOM_MAX - scif_txfill(port); +} + +static int scif_rxfill(struct uart_port *port) +{ + if ((port->mapbase == 0xffe00000) || + (port->mapbase == 0xffe08000)) { + /* SCIF0/1*/ + return sci_in(port, SCRFDR) & 0xff; + } else { + /* SCIF2 */ + return sci_in(port, SCFDR) & SCIF2_RFDC_MASK; + } +} +#elif defined(CONFIG_ARCH_SH7372) +static int scif_txfill(struct uart_port *port) +{ + if (port->type == PORT_SCIFA) + return sci_in(port, SCFDR) >> 8; + else + return sci_in(port, SCTFDR); +} + +static int scif_txroom(struct uart_port *port) +{ + return port->fifosize - scif_txfill(port); +} + +static int scif_rxfill(struct uart_port *port) +{ + if (port->type == PORT_SCIFA) + return sci_in(port, SCFDR) & SCIF_RFDC_MASK; + else + return sci_in(port, SCRFDR); +} +#else +static int scif_txfill(struct uart_port *port) +{ + return sci_in(port, SCFDR) >> 8; +} + +static int scif_txroom(struct uart_port *port) +{ + return SCIF_TXROOM_MAX - scif_txfill(port); +} + +static int scif_rxfill(struct uart_port *port) +{ + return sci_in(port, SCFDR) & SCIF_RFDC_MASK; +} +#endif + +static int sci_txfill(struct uart_port *port) +{ + return !(sci_in(port, SCxSR) & SCI_TDRE); +} + +static int sci_txroom(struct uart_port *port) +{ + return !sci_txfill(port); +} + +static int sci_rxfill(struct uart_port *port) +{ + return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; +} + +/* ********************************************************************** * + * the interrupt related routines * + * ********************************************************************** */ + +static void sci_transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned int stopped = uart_tx_stopped(port); + unsigned short status; + unsigned short ctrl; + int count; + + status = sci_in(port, SCxSR); + if (!(status & SCxSR_TDxE(port))) { + ctrl = sci_in(port, SCSCR); + if (uart_circ_empty(xmit)) + ctrl &= ~SCI_CTRL_FLAGS_TIE; + else + ctrl |= SCI_CTRL_FLAGS_TIE; + sci_out(port, SCSCR, ctrl); + return; + } + + if (port->type == PORT_SCI) + count = sci_txroom(port); + else + count = scif_txroom(port); + + do { + unsigned char c; + + if (port->x_char) { + c = port->x_char; + port->x_char = 0; + } else if (!uart_circ_empty(xmit) && !stopped) { + c = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } else { + break; + } + + sci_out(port, SCxTDR, c); + + port->icount.tx++; + } while (--count > 0); + + sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + if (uart_circ_empty(xmit)) { + sci_stop_tx(port); + } else { + ctrl = sci_in(port, SCSCR); + + if (port->type != PORT_SCI) { + sci_in(port, SCxSR); /* Dummy read */ + sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + } + + ctrl |= SCI_CTRL_FLAGS_TIE; + sci_out(port, SCSCR, ctrl); + } +} + +/* On SH3, SCIF may read end-of-break as a space->mark char */ +#define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); }) + +static inline void sci_receive_chars(struct uart_port *port) +{ + struct sci_port *sci_port = to_sci_port(port); + struct tty_struct *tty = port->state->port.tty; + int i, count, copied = 0; + unsigned short status; + unsigned char flag; + + status = sci_in(port, SCxSR); + if (!(status & SCxSR_RDxF(port))) + return; + + while (1) { + if (port->type == PORT_SCI) + count = sci_rxfill(port); + else + count = scif_rxfill(port); + + /* Don't copy more bytes than there is room for in the buffer */ + count = tty_buffer_request_room(tty, count); + + /* If for any reason we can't copy more data, we're done! */ + if (count == 0) + break; + + if (port->type == PORT_SCI) { + char c = sci_in(port, SCxRDR); + if (uart_handle_sysrq_char(port, c) || + sci_port->break_flag) + count = 0; + else + tty_insert_flip_char(tty, c, TTY_NORMAL); + } else { + for (i = 0; i < count; i++) { + char c = sci_in(port, SCxRDR); + status = sci_in(port, SCxSR); +#if defined(CONFIG_CPU_SH3) + /* Skip "chars" during break */ + if (sci_port->break_flag) { + if ((c == 0) && + (status & SCxSR_FER(port))) { + count--; i--; + continue; + } + + /* Nonzero => end-of-break */ + dev_dbg(port->dev, "debounce<%02x>\n", c); + sci_port->break_flag = 0; + + if (STEPFN(c)) { + count--; i--; + continue; + } + } +#endif /* CONFIG_CPU_SH3 */ + if (uart_handle_sysrq_char(port, c)) { + count--; i--; + continue; + } + + /* Store data and status */ + if (status & SCxSR_FER(port)) { + flag = TTY_FRAME; + dev_notice(port->dev, "frame error\n"); + } else if (status & SCxSR_PER(port)) { + flag = TTY_PARITY; + dev_notice(port->dev, "parity error\n"); + } else + flag = TTY_NORMAL; + + tty_insert_flip_char(tty, c, flag); + } + } + + sci_in(port, SCxSR); /* dummy read */ + sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + + copied += count; + port->icount.rx += count; + } + + if (copied) { + /* Tell the rest of the system the news. New characters! */ + tty_flip_buffer_push(tty); + } else { + sci_in(port, SCxSR); /* dummy read */ + sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + } +} + +#define SCI_BREAK_JIFFIES (HZ/20) +/* The sci generates interrupts during the break, + * 1 per millisecond or so during the break period, for 9600 baud. + * So dont bother disabling interrupts. + * But dont want more than 1 break event. + * Use a kernel timer to periodically poll the rx line until + * the break is finished. + */ +static void sci_schedule_break_timer(struct sci_port *port) +{ + port->break_timer.expires = jiffies + SCI_BREAK_JIFFIES; + add_timer(&port->break_timer); +} +/* Ensure that two consecutive samples find the break over. */ +static void sci_break_timer(unsigned long data) +{ + struct sci_port *port = (struct sci_port *)data; + + if (sci_rxd_in(&port->port) == 0) { + port->break_flag = 1; + sci_schedule_break_timer(port); + } else if (port->break_flag == 1) { + /* break is over. */ + port->break_flag = 2; + sci_schedule_break_timer(port); + } else + port->break_flag = 0; +} + +static inline int sci_handle_errors(struct uart_port *port) +{ + int copied = 0; + unsigned short status = sci_in(port, SCxSR); + struct tty_struct *tty = port->state->port.tty; + + if (status & SCxSR_ORER(port)) { + /* overrun error */ + if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) + copied++; + + dev_notice(port->dev, "overrun error"); + } + + if (status & SCxSR_FER(port)) { + if (sci_rxd_in(port) == 0) { + /* Notify of BREAK */ + struct sci_port *sci_port = to_sci_port(port); + + if (!sci_port->break_flag) { + sci_port->break_flag = 1; + sci_schedule_break_timer(sci_port); + + /* Do sysrq handling. */ + if (uart_handle_break(port)) + return 0; + + dev_dbg(port->dev, "BREAK detected\n"); + + if (tty_insert_flip_char(tty, 0, TTY_BREAK)) + copied++; + } + + } else { + /* frame error */ + if (tty_insert_flip_char(tty, 0, TTY_FRAME)) + copied++; + + dev_notice(port->dev, "frame error\n"); + } + } + + if (status & SCxSR_PER(port)) { + /* parity error */ + if (tty_insert_flip_char(tty, 0, TTY_PARITY)) + copied++; + + dev_notice(port->dev, "parity error"); + } + + if (copied) + tty_flip_buffer_push(tty); + + return copied; +} + +static inline int sci_handle_fifo_overrun(struct uart_port *port) +{ + struct tty_struct *tty = port->state->port.tty; + int copied = 0; + + if (port->type != PORT_SCIF) + return 0; + + if ((sci_in(port, SCLSR) & SCIF_ORER) != 0) { + sci_out(port, SCLSR, 0); + + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + tty_flip_buffer_push(tty); + + dev_notice(port->dev, "overrun error\n"); + copied++; + } + + return copied; +} + +static inline int sci_handle_breaks(struct uart_port *port) +{ + int copied = 0; + unsigned short status = sci_in(port, SCxSR); + struct tty_struct *tty = port->state->port.tty; + struct sci_port *s = to_sci_port(port); + + if (uart_handle_break(port)) + return 0; + + if (!s->break_flag && status & SCxSR_BRK(port)) { +#if defined(CONFIG_CPU_SH3) + /* Debounce break */ + s->break_flag = 1; +#endif + /* Notify of BREAK */ + if (tty_insert_flip_char(tty, 0, TTY_BREAK)) + copied++; + + dev_dbg(port->dev, "BREAK detected\n"); + } + + if (copied) + tty_flip_buffer_push(tty); + + copied += sci_handle_fifo_overrun(port); + + return copied; +} + +static irqreturn_t sci_rx_interrupt(int irq, void *ptr) +{ +#ifdef CONFIG_SERIAL_SH_SCI_DMA + struct uart_port *port = ptr; + struct sci_port *s = to_sci_port(port); + + if (s->chan_rx) { + u16 scr = sci_in(port, SCSCR); + u16 ssr = sci_in(port, SCxSR); + + /* Disable future Rx interrupts */ + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + disable_irq_nosync(irq); + scr |= 0x4000; + } else { + scr &= ~SCI_CTRL_FLAGS_RIE; + } + sci_out(port, SCSCR, scr); + /* Clear current interrupt */ + sci_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port))); + dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n", + jiffies, s->rx_timeout); + mod_timer(&s->rx_timer, jiffies + s->rx_timeout); + + return IRQ_HANDLED; + } +#endif + + /* I think sci_receive_chars has to be called irrespective + * of whether the I_IXOFF is set, otherwise, how is the interrupt + * to be disabled? + */ + sci_receive_chars(ptr); + + return IRQ_HANDLED; +} + +static irqreturn_t sci_tx_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + sci_transmit_chars(port); + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + +static irqreturn_t sci_er_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + + /* Handle errors */ + if (port->type == PORT_SCI) { + if (sci_handle_errors(port)) { + /* discard character in rx buffer */ + sci_in(port, SCxSR); + sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + } + } else { + sci_handle_fifo_overrun(port); + sci_rx_interrupt(irq, ptr); + } + + sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); + + /* Kick the transmission */ + sci_tx_interrupt(irq, ptr); + + return IRQ_HANDLED; +} + +static irqreturn_t sci_br_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + + /* Handle BREAKs */ + sci_handle_breaks(port); + sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); + + return IRQ_HANDLED; +} + +static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) +{ + unsigned short ssr_status, scr_status, err_enabled; + struct uart_port *port = ptr; + struct sci_port *s = to_sci_port(port); + irqreturn_t ret = IRQ_NONE; + + ssr_status = sci_in(port, SCxSR); + scr_status = sci_in(port, SCSCR); + err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE); + + /* Tx Interrupt */ + if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE) && + !s->chan_tx) + ret = sci_tx_interrupt(irq, ptr); + /* + * Rx Interrupt: if we're using DMA, the DMA controller clears RDF / + * DR flags + */ + if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) && + (scr_status & SCI_CTRL_FLAGS_RIE)) + ret = sci_rx_interrupt(irq, ptr); + /* Error Interrupt */ + if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled) + ret = sci_er_interrupt(irq, ptr); + /* Break Interrupt */ + if ((ssr_status & SCxSR_BRK(port)) && err_enabled) + ret = sci_br_interrupt(irq, ptr); + + return ret; +} + +/* + * Here we define a transistion notifier so that we can update all of our + * ports' baud rate when the peripheral clock changes. + */ +static int sci_notifier(struct notifier_block *self, + unsigned long phase, void *p) +{ + struct sh_sci_priv *priv = container_of(self, + struct sh_sci_priv, clk_nb); + struct sci_port *sci_port; + unsigned long flags; + + if ((phase == CPUFREQ_POSTCHANGE) || + (phase == CPUFREQ_RESUMECHANGE)) { + spin_lock_irqsave(&priv->lock, flags); + list_for_each_entry(sci_port, &priv->ports, node) + sci_port->port.uartclk = clk_get_rate(sci_port->iclk); + spin_unlock_irqrestore(&priv->lock, flags); + } + + return NOTIFY_OK; +} + +static void sci_clk_enable(struct uart_port *port) +{ + struct sci_port *sci_port = to_sci_port(port); + + clk_enable(sci_port->iclk); + sci_port->port.uartclk = clk_get_rate(sci_port->iclk); + clk_enable(sci_port->fclk); +} + +static void sci_clk_disable(struct uart_port *port) +{ + struct sci_port *sci_port = to_sci_port(port); + + clk_disable(sci_port->fclk); + clk_disable(sci_port->iclk); +} + +static int sci_request_irq(struct sci_port *port) +{ + int i; + irqreturn_t (*handlers[4])(int irq, void *ptr) = { + sci_er_interrupt, sci_rx_interrupt, sci_tx_interrupt, + sci_br_interrupt, + }; + const char *desc[] = { "SCI Receive Error", "SCI Receive Data Full", + "SCI Transmit Data Empty", "SCI Break" }; + + if (port->irqs[0] == port->irqs[1]) { + if (unlikely(!port->irqs[0])) + return -ENODEV; + + if (request_irq(port->irqs[0], sci_mpxed_interrupt, + IRQF_DISABLED, "sci", port)) { + dev_err(port->port.dev, "Can't allocate IRQ\n"); + return -ENODEV; + } + } else { + for (i = 0; i < ARRAY_SIZE(handlers); i++) { + if (unlikely(!port->irqs[i])) + continue; + + if (request_irq(port->irqs[i], handlers[i], + IRQF_DISABLED, desc[i], port)) { + dev_err(port->port.dev, "Can't allocate IRQ\n"); + return -ENODEV; + } + } + } + + return 0; +} + +static void sci_free_irq(struct sci_port *port) +{ + int i; + + if (port->irqs[0] == port->irqs[1]) + free_irq(port->irqs[0], port); + else { + for (i = 0; i < ARRAY_SIZE(port->irqs); i++) { + if (!port->irqs[i]) + continue; + + free_irq(port->irqs[i], port); + } + } +} + +static unsigned int sci_tx_empty(struct uart_port *port) +{ + unsigned short status = sci_in(port, SCxSR); + unsigned short in_tx_fifo = scif_txfill(port); + + return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0; +} + +static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* This routine is used for seting signals of: DTR, DCD, CTS/RTS */ + /* We use SCIF's hardware for CTS/RTS, so don't need any for that. */ + /* If you have signals for DTR and DCD, please implement here. */ +} + +static unsigned int sci_get_mctrl(struct uart_port *port) +{ + /* This routine is used for getting signals of: DTR, DCD, DSR, RI, + and CTS/RTS */ + + return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR; +} + +#ifdef CONFIG_SERIAL_SH_SCI_DMA +static void sci_dma_tx_complete(void *arg) +{ + struct sci_port *s = arg; + struct uart_port *port = &s->port; + struct circ_buf *xmit = &port->state->xmit; + unsigned long flags; + + dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + + spin_lock_irqsave(&port->lock, flags); + + xmit->tail += sg_dma_len(&s->sg_tx); + xmit->tail &= UART_XMIT_SIZE - 1; + + port->icount.tx += sg_dma_len(&s->sg_tx); + + async_tx_ack(s->desc_tx); + s->cookie_tx = -EINVAL; + s->desc_tx = NULL; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (!uart_circ_empty(xmit)) { + schedule_work(&s->work_tx); + } else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + u16 ctrl = sci_in(port, SCSCR); + sci_out(port, SCSCR, ctrl & ~SCI_CTRL_FLAGS_TIE); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Locking: called with port lock held */ +static int sci_dma_rx_push(struct sci_port *s, struct tty_struct *tty, + size_t count) +{ + struct uart_port *port = &s->port; + int i, active, room; + + room = tty_buffer_request_room(tty, count); + + if (s->active_rx == s->cookie_rx[0]) { + active = 0; + } else if (s->active_rx == s->cookie_rx[1]) { + active = 1; + } else { + dev_err(port->dev, "cookie %d not found!\n", s->active_rx); + return 0; + } + + if (room < count) + dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", + count - room); + if (!room) + return room; + + for (i = 0; i < room; i++) + tty_insert_flip_char(tty, ((u8 *)sg_virt(&s->sg_rx[active]))[i], + TTY_NORMAL); + + port->icount.rx += room; + + return room; +} + +static void sci_dma_rx_complete(void *arg) +{ + struct sci_port *s = arg; + struct uart_port *port = &s->port; + struct tty_struct *tty = port->state->port.tty; + unsigned long flags; + int count; + + dev_dbg(port->dev, "%s(%d) active #%d\n", __func__, port->line, s->active_rx); + + spin_lock_irqsave(&port->lock, flags); + + count = sci_dma_rx_push(s, tty, s->buf_len_rx); + + mod_timer(&s->rx_timer, jiffies + s->rx_timeout); + + spin_unlock_irqrestore(&port->lock, flags); + + if (count) + tty_flip_buffer_push(tty); + + schedule_work(&s->work_rx); +} + +static void sci_start_rx(struct uart_port *port); +static void sci_start_tx(struct uart_port *port); + +static void sci_rx_dma_release(struct sci_port *s, bool enable_pio) +{ + struct dma_chan *chan = s->chan_rx; + struct uart_port *port = &s->port; + + s->chan_rx = NULL; + s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL; + dma_release_channel(chan); + if (sg_dma_address(&s->sg_rx[0])) + dma_free_coherent(port->dev, s->buf_len_rx * 2, + sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0])); + if (enable_pio) + sci_start_rx(port); +} + +static void sci_tx_dma_release(struct sci_port *s, bool enable_pio) +{ + struct dma_chan *chan = s->chan_tx; + struct uart_port *port = &s->port; + + s->chan_tx = NULL; + s->cookie_tx = -EINVAL; + dma_release_channel(chan); + if (enable_pio) + sci_start_tx(port); +} + +static void sci_submit_rx(struct sci_port *s) +{ + struct dma_chan *chan = s->chan_rx; + int i; + + for (i = 0; i < 2; i++) { + struct scatterlist *sg = &s->sg_rx[i]; + struct dma_async_tx_descriptor *desc; + + desc = chan->device->device_prep_slave_sg(chan, + sg, 1, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT); + + if (desc) { + s->desc_rx[i] = desc; + desc->callback = sci_dma_rx_complete; + desc->callback_param = s; + s->cookie_rx[i] = desc->tx_submit(desc); + } + + if (!desc || s->cookie_rx[i] < 0) { + if (i) { + async_tx_ack(s->desc_rx[0]); + s->cookie_rx[0] = -EINVAL; + } + if (desc) { + async_tx_ack(desc); + s->cookie_rx[i] = -EINVAL; + } + dev_warn(s->port.dev, + "failed to re-start DMA, using PIO\n"); + sci_rx_dma_release(s, true); + return; + } + dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__, + s->cookie_rx[i], i); + } + + s->active_rx = s->cookie_rx[0]; + + dma_async_issue_pending(chan); +} + +static void work_fn_rx(struct work_struct *work) +{ + struct sci_port *s = container_of(work, struct sci_port, work_rx); + struct uart_port *port = &s->port; + struct dma_async_tx_descriptor *desc; + int new; + + if (s->active_rx == s->cookie_rx[0]) { + new = 0; + } else if (s->active_rx == s->cookie_rx[1]) { + new = 1; + } else { + dev_err(port->dev, "cookie %d not found!\n", s->active_rx); + return; + } + desc = s->desc_rx[new]; + + if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) != + DMA_SUCCESS) { + /* Handle incomplete DMA receive */ + struct tty_struct *tty = port->state->port.tty; + struct dma_chan *chan = s->chan_rx; + struct sh_desc *sh_desc = container_of(desc, struct sh_desc, + async_tx); + unsigned long flags; + int count; + + chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); + dev_dbg(port->dev, "Read %u bytes with cookie %d\n", + sh_desc->partial, sh_desc->cookie); + + spin_lock_irqsave(&port->lock, flags); + count = sci_dma_rx_push(s, tty, sh_desc->partial); + spin_unlock_irqrestore(&port->lock, flags); + + if (count) + tty_flip_buffer_push(tty); + + sci_submit_rx(s); + + return; + } + + s->cookie_rx[new] = desc->tx_submit(desc); + if (s->cookie_rx[new] < 0) { + dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n"); + sci_rx_dma_release(s, true); + return; + } + + s->active_rx = s->cookie_rx[!new]; + + dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n", __func__, + s->cookie_rx[new], new, s->active_rx); +} + +static void work_fn_tx(struct work_struct *work) +{ + struct sci_port *s = container_of(work, struct sci_port, work_tx); + struct dma_async_tx_descriptor *desc; + struct dma_chan *chan = s->chan_tx; + struct uart_port *port = &s->port; + struct circ_buf *xmit = &port->state->xmit; + struct scatterlist *sg = &s->sg_tx; + + /* + * DMA is idle now. + * Port xmit buffer is already mapped, and it is one page... Just adjust + * offsets and lengths. Since it is a circular buffer, we have to + * transmit till the end, and then the rest. Take the port lock to get a + * consistent xmit buffer state. + */ + spin_lock_irq(&port->lock); + sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); + sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + + sg->offset; + sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), + CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE)); + spin_unlock_irq(&port->lock); + + BUG_ON(!sg_dma_len(sg)); + + desc = chan->device->device_prep_slave_sg(chan, + sg, s->sg_len_tx, DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + /* switch to PIO */ + sci_tx_dma_release(s, true); + return; + } + + dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); + + spin_lock_irq(&port->lock); + s->desc_tx = desc; + desc->callback = sci_dma_tx_complete; + desc->callback_param = s; + spin_unlock_irq(&port->lock); + s->cookie_tx = desc->tx_submit(desc); + if (s->cookie_tx < 0) { + dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n"); + /* switch to PIO */ + sci_tx_dma_release(s, true); + return; + } + + dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__, + xmit->buf, xmit->tail, xmit->head, s->cookie_tx); + + dma_async_issue_pending(chan); +} +#endif + +static void sci_start_tx(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + unsigned short ctrl; + +#ifdef CONFIG_SERIAL_SH_SCI_DMA + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + u16 new, scr = sci_in(port, SCSCR); + if (s->chan_tx) + new = scr | 0x8000; + else + new = scr & ~0x8000; + if (new != scr) + sci_out(port, SCSCR, new); + } + if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && + s->cookie_tx < 0) + schedule_work(&s->work_tx); +#endif + if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ + ctrl = sci_in(port, SCSCR); + sci_out(port, SCSCR, ctrl | SCI_CTRL_FLAGS_TIE); + } +} + +static void sci_stop_tx(struct uart_port *port) +{ + unsigned short ctrl; + + /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ + ctrl = sci_in(port, SCSCR); + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + ctrl &= ~0x8000; + ctrl &= ~SCI_CTRL_FLAGS_TIE; + sci_out(port, SCSCR, ctrl); +} + +static void sci_start_rx(struct uart_port *port) +{ + unsigned short ctrl = SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE; + + /* Set RIE (Receive Interrupt Enable) bit in SCSCR */ + ctrl |= sci_in(port, SCSCR); + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + ctrl &= ~0x4000; + sci_out(port, SCSCR, ctrl); +} + +static void sci_stop_rx(struct uart_port *port) +{ + unsigned short ctrl; + + /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */ + ctrl = sci_in(port, SCSCR); + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) + ctrl &= ~0x4000; + ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE); + sci_out(port, SCSCR, ctrl); +} + +static void sci_enable_ms(struct uart_port *port) +{ + /* Nothing here yet .. */ +} + +static void sci_break_ctl(struct uart_port *port, int break_state) +{ + /* Nothing here yet .. */ +} + +#ifdef CONFIG_SERIAL_SH_SCI_DMA +static bool filter(struct dma_chan *chan, void *slave) +{ + struct sh_dmae_slave *param = slave; + + dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__, + param->slave_id); + + if (param->dma_dev == chan->device->dev) { + chan->private = param; + return true; + } else { + return false; + } +} + +static void rx_timer_fn(unsigned long arg) +{ + struct sci_port *s = (struct sci_port *)arg; + struct uart_port *port = &s->port; + u16 scr = sci_in(port, SCSCR); + + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { + scr &= ~0x4000; + enable_irq(s->irqs[1]); + } + sci_out(port, SCSCR, scr | SCI_CTRL_FLAGS_RIE); + dev_dbg(port->dev, "DMA Rx timed out\n"); + schedule_work(&s->work_rx); +} + +static void sci_request_dma(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + struct sh_dmae_slave *param; + struct dma_chan *chan; + dma_cap_mask_t mask; + int nent; + + dev_dbg(port->dev, "%s: port %d DMA %p\n", __func__, + port->line, s->dma_dev); + + if (!s->dma_dev) + return; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + param = &s->param_tx; + + /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */ + param->slave_id = s->slave_tx; + param->dma_dev = s->dma_dev; + + s->cookie_tx = -EINVAL; + chan = dma_request_channel(mask, filter, param); + dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan); + if (chan) { + s->chan_tx = chan; + sg_init_table(&s->sg_tx, 1); + /* UART circular tx buffer is an aligned page. */ + BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK); + sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf), + UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK); + nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE); + if (!nent) + sci_tx_dma_release(s, false); + else + dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__, + sg_dma_len(&s->sg_tx), + port->state->xmit.buf, sg_dma_address(&s->sg_tx)); + + s->sg_len_tx = nent; + + INIT_WORK(&s->work_tx, work_fn_tx); + } + + param = &s->param_rx; + + /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */ + param->slave_id = s->slave_rx; + param->dma_dev = s->dma_dev; + + chan = dma_request_channel(mask, filter, param); + dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan); + if (chan) { + dma_addr_t dma[2]; + void *buf[2]; + int i; + + s->chan_rx = chan; + + s->buf_len_rx = 2 * max(16, (int)port->fifosize); + buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2, + &dma[0], GFP_KERNEL); + + if (!buf[0]) { + dev_warn(port->dev, + "failed to allocate dma buffer, using PIO\n"); + sci_rx_dma_release(s, true); + return; + } + + buf[1] = buf[0] + s->buf_len_rx; + dma[1] = dma[0] + s->buf_len_rx; + + for (i = 0; i < 2; i++) { + struct scatterlist *sg = &s->sg_rx[i]; + + sg_init_table(sg, 1); + sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx, + (int)buf[i] & ~PAGE_MASK); + sg_dma_address(sg) = dma[i]; + } + + INIT_WORK(&s->work_rx, work_fn_rx); + setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s); + + sci_submit_rx(s); + } +} + +static void sci_free_dma(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + + if (!s->dma_dev) + return; + + if (s->chan_tx) + sci_tx_dma_release(s, false); + if (s->chan_rx) + sci_rx_dma_release(s, false); +} +#endif + +static int sci_startup(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + + dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + + if (s->enable) + s->enable(port); + + sci_request_irq(s); +#ifdef CONFIG_SERIAL_SH_SCI_DMA + sci_request_dma(port); +#endif + sci_start_tx(port); + sci_start_rx(port); + + return 0; +} + +static void sci_shutdown(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + + dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + + sci_stop_rx(port); + sci_stop_tx(port); +#ifdef CONFIG_SERIAL_SH_SCI_DMA + sci_free_dma(port); +#endif + sci_free_irq(s); + + if (s->disable) + s->disable(port); +} + +static void sci_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ +#ifdef CONFIG_SERIAL_SH_SCI_DMA + struct sci_port *s = to_sci_port(port); +#endif + unsigned int status, baud, smr_val, max_baud; + int t = -1; + u16 scfcr = 0; + + /* + * earlyprintk comes here early on with port->uartclk set to zero. + * the clock framework is not up and running at this point so here + * we assume that 115200 is the maximum baud rate. please note that + * the baud rate is not programmed during earlyprintk - it is assumed + * that the previous boot loader has enabled required clocks and + * setup the baud rate generator hardware for us already. + */ + max_baud = port->uartclk ? port->uartclk / 16 : 115200; + + baud = uart_get_baud_rate(port, termios, old, 0, max_baud); + if (likely(baud && port->uartclk)) + t = SCBRR_VALUE(baud, port->uartclk); + + do { + status = sci_in(port, SCxSR); + } while (!(status & SCxSR_TEND(port))); + + sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ + + if (port->type != PORT_SCI) + sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST); + + smr_val = sci_in(port, SCSMR) & 3; + if ((termios->c_cflag & CSIZE) == CS7) + smr_val |= 0x40; + if (termios->c_cflag & PARENB) + smr_val |= 0x20; + if (termios->c_cflag & PARODD) + smr_val |= 0x30; + if (termios->c_cflag & CSTOPB) + smr_val |= 0x08; + + uart_update_timeout(port, termios->c_cflag, baud); + + sci_out(port, SCSMR, smr_val); + + dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t, + SCSCR_INIT(port)); + + if (t > 0) { + if (t >= 256) { + sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1); + t >>= 2; + } else + sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3); + + sci_out(port, SCBRR, t); + udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */ + } + + sci_init_pins(port, termios->c_cflag); + sci_out(port, SCFCR, scfcr | ((termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0)); + + sci_out(port, SCSCR, SCSCR_INIT(port)); + +#ifdef CONFIG_SERIAL_SH_SCI_DMA + /* + * Calculate delay for 1.5 DMA buffers: see + * drivers/serial/serial_core.c::uart_update_timeout(). With 10 bits + * (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function + * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)." + * Then below we calculate 3 jiffies (12ms) for 1.5 DMA buffers (3 FIFO + * sizes), but it has been found out experimentally, that this is not + * enough: the driver too often needlessly runs on a DMA timeout. 20ms + * as a minimum seem to work perfectly. + */ + if (s->chan_rx) { + s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 / + port->fifosize / 2; + dev_dbg(port->dev, + "DMA Rx t-out %ums, tty t-out %u jiffies\n", + s->rx_timeout * 1000 / HZ, port->timeout); + if (s->rx_timeout < msecs_to_jiffies(20)) + s->rx_timeout = msecs_to_jiffies(20); + } +#endif + + if ((termios->c_cflag & CREAD) != 0) + sci_start_rx(port); +} + +static const char *sci_type(struct uart_port *port) +{ + switch (port->type) { + case PORT_IRDA: + return "irda"; + case PORT_SCI: + return "sci"; + case PORT_SCIF: + return "scif"; + case PORT_SCIFA: + return "scifa"; + case PORT_SCIFB: + return "scifb"; + } + + return NULL; +} + +static void sci_release_port(struct uart_port *port) +{ + /* Nothing here yet .. */ +} + +static int sci_request_port(struct uart_port *port) +{ + /* Nothing here yet .. */ + return 0; +} + +static void sci_config_port(struct uart_port *port, int flags) +{ + struct sci_port *s = to_sci_port(port); + + port->type = s->type; + + if (port->membase) + return; + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap_nocache(port->mapbase, 0x40); + + if (IS_ERR(port->membase)) + dev_err(port->dev, "can't remap port#%d\n", port->line); + } else { + /* + * For the simple (and majority of) cases where we don't + * need to do any remapping, just cast the cookie + * directly. + */ + port->membase = (void __iomem *)port->mapbase; + } +} + +static int sci_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct sci_port *s = to_sci_port(port); + + if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs) + return -EINVAL; + if (ser->baud_base < 2400) + /* No paper tape reader for Mitch.. */ + return -EINVAL; + + return 0; +} + +static struct uart_ops sci_uart_ops = { + .tx_empty = sci_tx_empty, + .set_mctrl = sci_set_mctrl, + .get_mctrl = sci_get_mctrl, + .start_tx = sci_start_tx, + .stop_tx = sci_stop_tx, + .stop_rx = sci_stop_rx, + .enable_ms = sci_enable_ms, + .break_ctl = sci_break_ctl, + .startup = sci_startup, + .shutdown = sci_shutdown, + .set_termios = sci_set_termios, + .type = sci_type, + .release_port = sci_release_port, + .request_port = sci_request_port, + .config_port = sci_config_port, + .verify_port = sci_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = sci_poll_get_char, + .poll_put_char = sci_poll_put_char, +#endif +}; + +static int __devinit sci_init_single(struct platform_device *dev, + struct sci_port *sci_port, + unsigned int index, + struct plat_sci_port *p) +{ + struct uart_port *port = &sci_port->port; + + port->ops = &sci_uart_ops; + port->iotype = UPIO_MEM; + port->line = index; + + switch (p->type) { + case PORT_SCIFB: + port->fifosize = 256; + break; + case PORT_SCIFA: + port->fifosize = 64; + break; + case PORT_SCIF: + port->fifosize = 16; + break; + default: + port->fifosize = 1; + break; + } + + if (dev) { + sci_port->iclk = clk_get(&dev->dev, "sci_ick"); + if (IS_ERR(sci_port->iclk)) { + sci_port->iclk = clk_get(&dev->dev, "peripheral_clk"); + if (IS_ERR(sci_port->iclk)) { + dev_err(&dev->dev, "can't get iclk\n"); + return PTR_ERR(sci_port->iclk); + } + } + + /* + * The function clock is optional, ignore it if we can't + * find it. + */ + sci_port->fclk = clk_get(&dev->dev, "sci_fck"); + if (IS_ERR(sci_port->fclk)) + sci_port->fclk = NULL; + + sci_port->enable = sci_clk_enable; + sci_port->disable = sci_clk_disable; + port->dev = &dev->dev; + } + + sci_port->break_timer.data = (unsigned long)sci_port; + sci_port->break_timer.function = sci_break_timer; + init_timer(&sci_port->break_timer); + + port->mapbase = p->mapbase; + port->membase = p->membase; + + port->irq = p->irqs[SCIx_TXI_IRQ]; + port->flags = p->flags; + sci_port->type = port->type = p->type; + +#ifdef CONFIG_SERIAL_SH_SCI_DMA + sci_port->dma_dev = p->dma_dev; + sci_port->slave_tx = p->dma_slave_tx; + sci_port->slave_rx = p->dma_slave_rx; + + dev_dbg(port->dev, "%s: DMA device %p, tx %d, rx %d\n", __func__, + p->dma_dev, p->dma_slave_tx, p->dma_slave_rx); +#endif + + memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); + return 0; +} + +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE +static struct tty_driver *serial_console_device(struct console *co, int *index) +{ + struct uart_driver *p = &sci_uart_driver; + *index = co->index; + return p->tty_driver; +} + +static void serial_console_putchar(struct uart_port *port, int ch) +{ + sci_poll_put_char(port, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ +static void serial_console_write(struct console *co, const char *s, + unsigned count) +{ + struct uart_port *port = co->data; + struct sci_port *sci_port = to_sci_port(port); + unsigned short bits; + + if (sci_port->enable) + sci_port->enable(port); + + uart_console_write(port, s, count, serial_console_putchar); + + /* wait until fifo is empty and last bit has been transmitted */ + bits = SCxSR_TDxE(port) | SCxSR_TEND(port); + while ((sci_in(port, SCxSR) & bits) != bits) + cpu_relax(); + + if (sci_port->disable) + sci_port->disable(port); +} + +static int __devinit serial_console_setup(struct console *co, char *options) +{ + struct sci_port *sci_port; + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= SCI_NPORTS) + co->index = 0; + + if (co->data) { + port = co->data; + sci_port = to_sci_port(port); + } else { + sci_port = &sci_ports[co->index]; + port = &sci_port->port; + co->data = port; + } + + /* + * Also need to check port->type, we don't actually have any + * UPIO_PORT ports, but uart_report_port() handily misreports + * it anyways if we don't have a port available by the time this is + * called. + */ + if (!port->type) + return -ENODEV; + + sci_config_port(port, 0); + + if (sci_port->enable) + sci_port->enable(port); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + ret = uart_set_options(port, co, baud, parity, bits, flow); +#if defined(__H8300H__) || defined(__H8300S__) + /* disable rx interrupt */ + if (ret == 0) + sci_stop_rx(port); +#endif + /* TODO: disable clock */ + return ret; +} + +static struct console serial_console = { + .name = "ttySC", + .device = serial_console_device, + .write = serial_console_write, + .setup = serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static int __init sci_console_init(void) +{ + register_console(&serial_console); + return 0; +} +console_initcall(sci_console_init); + +static struct sci_port early_serial_port; +static struct console early_serial_console = { + .name = "early_ttySC", + .write = serial_console_write, + .flags = CON_PRINTBUFFER, +}; +static char early_serial_buf[32]; + +#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ + +#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) +#define SCI_CONSOLE (&serial_console) +#else +#define SCI_CONSOLE 0 +#endif + +static char banner[] __initdata = + KERN_INFO "SuperH SCI(F) driver initialized\n"; + +static struct uart_driver sci_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "sci", + .dev_name = "ttySC", + .major = SCI_MAJOR, + .minor = SCI_MINOR_START, + .nr = SCI_NPORTS, + .cons = SCI_CONSOLE, +}; + + +static int sci_remove(struct platform_device *dev) +{ + struct sh_sci_priv *priv = platform_get_drvdata(dev); + struct sci_port *p; + unsigned long flags; + + cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); + + spin_lock_irqsave(&priv->lock, flags); + list_for_each_entry(p, &priv->ports, node) { + uart_remove_one_port(&sci_uart_driver, &p->port); + clk_put(p->iclk); + clk_put(p->fclk); + } + spin_unlock_irqrestore(&priv->lock, flags); + + kfree(priv); + return 0; +} + +static int __devinit sci_probe_single(struct platform_device *dev, + unsigned int index, + struct plat_sci_port *p, + struct sci_port *sciport) +{ + struct sh_sci_priv *priv = platform_get_drvdata(dev); + unsigned long flags; + int ret; + + /* Sanity check */ + if (unlikely(index >= SCI_NPORTS)) { + dev_notice(&dev->dev, "Attempting to register port " + "%d when only %d are available.\n", + index+1, SCI_NPORTS); + dev_notice(&dev->dev, "Consider bumping " + "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); + return 0; + } + + ret = sci_init_single(dev, sciport, index, p); + if (ret) + return ret; + + ret = uart_add_one_port(&sci_uart_driver, &sciport->port); + if (ret) + return ret; + + INIT_LIST_HEAD(&sciport->node); + + spin_lock_irqsave(&priv->lock, flags); + list_add(&sciport->node, &priv->ports); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +/* + * Register a set of serial devices attached to a platform device. The + * list is terminated with a zero flags entry, which means we expect + * all entries to have at least UPF_BOOT_AUTOCONF set. Platforms that need + * remapping (such as sh64) should also set UPF_IOREMAP. + */ +static int __devinit sci_probe(struct platform_device *dev) +{ + struct plat_sci_port *p = dev->dev.platform_data; + struct sh_sci_priv *priv; + int i, ret = -EINVAL; + +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE + if (is_early_platform_device(dev)) { + if (dev->id == -1) + return -ENOTSUPP; + early_serial_console.index = dev->id; + early_serial_console.data = &early_serial_port.port; + sci_init_single(NULL, &early_serial_port, dev->id, p); + serial_console_setup(&early_serial_console, early_serial_buf); + if (!strstr(early_serial_buf, "keep")) + early_serial_console.flags |= CON_BOOT; + register_console(&early_serial_console); + return 0; + } +#endif + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + INIT_LIST_HEAD(&priv->ports); + spin_lock_init(&priv->lock); + platform_set_drvdata(dev, priv); + + priv->clk_nb.notifier_call = sci_notifier; + cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER); + + if (dev->id != -1) { + ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]); + if (ret) + goto err_unreg; + } else { + for (i = 0; p && p->flags != 0; p++, i++) { + ret = sci_probe_single(dev, i, p, &sci_ports[i]); + if (ret) + goto err_unreg; + } + } + +#ifdef CONFIG_SH_STANDARD_BIOS + sh_bios_gdb_detach(); +#endif + + return 0; + +err_unreg: + sci_remove(dev); + return ret; +} + +static int sci_suspend(struct device *dev) +{ + struct sh_sci_priv *priv = dev_get_drvdata(dev); + struct sci_port *p; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + list_for_each_entry(p, &priv->ports, node) + uart_suspend_port(&sci_uart_driver, &p->port); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int sci_resume(struct device *dev) +{ + struct sh_sci_priv *priv = dev_get_drvdata(dev); + struct sci_port *p; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + list_for_each_entry(p, &priv->ports, node) + uart_resume_port(&sci_uart_driver, &p->port); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static const struct dev_pm_ops sci_dev_pm_ops = { + .suspend = sci_suspend, + .resume = sci_resume, +}; + +static struct platform_driver sci_driver = { + .probe = sci_probe, + .remove = sci_remove, + .driver = { + .name = "sh-sci", + .owner = THIS_MODULE, + .pm = &sci_dev_pm_ops, + }, +}; + +static int __init sci_init(void) +{ + int ret; + + printk(banner); + + ret = uart_register_driver(&sci_uart_driver); + if (likely(ret == 0)) { + ret = platform_driver_register(&sci_driver); + if (unlikely(ret)) + uart_unregister_driver(&sci_uart_driver); + } + + return ret; +} + +static void __exit sci_exit(void) +{ + platform_driver_unregister(&sci_driver); + uart_unregister_driver(&sci_uart_driver); +} + +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE +early_platform_init_buffer("earlyprintk", &sci_driver, + early_serial_buf, ARRAY_SIZE(early_serial_buf)); +#endif +module_init(sci_init); +module_exit(sci_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:sh-sci"); diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h new file mode 100644 index 000000000000..4bc614e4221c --- /dev/null +++ b/drivers/tty/serial/sh-sci.h @@ -0,0 +1,660 @@ +#include +#include +#include + +#if defined(CONFIG_H83007) || defined(CONFIG_H83068) +#include +#endif +#if defined(CONFIG_H8S2678) +#include +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7708) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) +# define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ +# define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ +# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) +# define SCIF0 0xA4400000 +# define SCIF2 0xA4410000 +# define SCSMR_Ir 0xA44A0000 +# define IRDA_SCIF SCIF0 +# define SCPCR 0xA4000116 +# define SCPDR 0xA4000136 + +/* Set the clock source, + * SCIF2 (0xA4410000) -> External clock, SCK pin used as clock input + * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output + */ +# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 +#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) +# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ +# define PORT_PTCR 0xA405011EUL +# define PORT_PVCR 0xA4050122UL +# define SCIF_ORER 0x0200 /* overrun error bit */ +#elif defined(CONFIG_SH_RTS7751R2D) +# define SCSPTR1 0xFFE0001C /* 8 bit SCIF */ +# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ + defined(CONFIG_CPU_SUBTYPE_SH7091) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751R) +# define SCSPTR1 0xffe0001c /* 8 bit SCI */ +# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \ + 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ + 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) +#elif defined(CONFIG_CPU_SUBTYPE_SH7760) +# define SCSPTR0 0xfe600024 /* 16 bit SCIF */ +# define SCSPTR1 0xfe610024 /* 16 bit SCIF */ +# define SCSPTR2 0xfe620024 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) +# define SCSPTR0 0xA4400000 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define PACR 0xa4050100 +# define PBCR 0xa4050102 +# define SCSCR_INIT(port) 0x3B +#elif defined(CONFIG_CPU_SUBTYPE_SH7343) +# define SCSPTR0 0xffe00010 /* 16 bit SCIF */ +# define SCSPTR1 0xffe10010 /* 16 bit SCIF */ +# define SCSPTR2 0xffe20010 /* 16 bit SCIF */ +# define SCSPTR3 0xffe30010 /* 16 bit SCIF */ +# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7722) +# define PADR 0xA4050120 +# define PSDR 0xA405013e +# define PWDR 0xA4050166 +# define PSCR 0xA405011E +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7366) +# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */ +# define SCSPTR0 SCPDR0 +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7723) +# define SCSPTR0 0xa4050160 +# define SCSPTR1 0xa405013e +# define SCSPTR2 0xa4050160 +# define SCSPTR3 0xa405013e +# define SCSPTR4 0xa4050128 +# define SCSPTR5 0xa4050128 +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7724) +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) ((port)->type == PORT_SCIFA ? \ + 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ + 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) +#elif defined(CONFIG_CPU_SUBTYPE_SH4_202) +# define SCSPTR2 0xffe80020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) +# define SCIF_BASE_ADDR 0x01030000 +# define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR +# define SCIF_PTR2_OFFS 0x0000020 +# define SCIF_LSR2_OFFS 0x0000024 +# define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */ +# define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_H83007) || defined(CONFIG_H83068) +# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ +# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) +#elif defined(CONFIG_H8S2678) +# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ +# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) +#elif defined(CONFIG_CPU_SUBTYPE_SH7757) +# define SCSPTR0 0xfe4b0020 +# define SCSPTR1 0xfe4b0020 +# define SCSPTR2 0xfe4b0020 +# define SCIF_ORER 0x0001 +# define SCSCR_INIT(port) 0x38 +# define SCIF_ONLY +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) +# define SCSPTR0 0xffe00024 /* 16 bit SCIF */ +# define SCSPTR1 0xffe08024 /* 16 bit SCIF */ +# define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7770) +# define SCSPTR0 0xff923020 /* 16 bit SCIF */ +# define SCSPTR1 0xff924020 /* 16 bit SCIF */ +# define SCSPTR2 0xff925020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7780) +# define SCSPTR0 0xffe00024 /* 16 bit SCIF */ +# define SCSPTR1 0xffe10024 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* Overrun error bit */ + +#if defined(CONFIG_SH_SH2007) +/* TIE=0,RIE=0,TE=1,RE=1,REIE=1,CKE1=0 */ +# define SCSCR_INIT(port) 0x38 +#else +/* TIE=0,RIE=0,TE=1,RE=1,REIE=1,CKE1=1 */ +# define SCSCR_INIT(port) 0x3a +#endif + +#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) +# define SCSPTR0 0xffea0024 /* 16 bit SCIF */ +# define SCSPTR1 0xffeb0024 /* 16 bit SCIF */ +# define SCSPTR2 0xffec0024 /* 16 bit SCIF */ +# define SCSPTR3 0xffed0024 /* 16 bit SCIF */ +# define SCSPTR4 0xffee0024 /* 16 bit SCIF */ +# define SCSPTR5 0xffef0024 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* Overrun error bit */ +# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ + defined(CONFIG_CPU_SUBTYPE_SH7203) || \ + defined(CONFIG_CPU_SUBTYPE_SH7206) || \ + defined(CONFIG_CPU_SUBTYPE_SH7263) +# define SCSPTR0 0xfffe8020 /* 16 bit SCIF */ +# define SCSPTR1 0xfffe8820 /* 16 bit SCIF */ +# define SCSPTR2 0xfffe9020 /* 16 bit SCIF */ +# define SCSPTR3 0xfffe9820 /* 16 bit SCIF */ +# if defined(CONFIG_CPU_SUBTYPE_SH7201) +# define SCSPTR4 0xfffeA020 /* 16 bit SCIF */ +# define SCSPTR5 0xfffeA820 /* 16 bit SCIF */ +# define SCSPTR6 0xfffeB020 /* 16 bit SCIF */ +# define SCSPTR7 0xfffeB820 /* 16 bit SCIF */ +# endif +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7619) +# define SCSPTR0 0xf8400020 /* 16 bit SCIF */ +# define SCSPTR1 0xf8410020 /* 16 bit SCIF */ +# define SCSPTR2 0xf8420020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_CPU_SUBTYPE_SHX3) +# define SCSPTR0 0xffc30020 /* 16 bit SCIF */ +# define SCSPTR1 0xffc40020 /* 16 bit SCIF */ +# define SCSPTR2 0xffc50020 /* 16 bit SCIF */ +# define SCSPTR3 0xffc60020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* Overrun error bit */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#else +# error CPU subtype not defined +#endif + +/* SCSCR */ +#define SCI_CTRL_FLAGS_TIE 0x80 /* all */ +#define SCI_CTRL_FLAGS_RIE 0x40 /* all */ +#define SCI_CTRL_FLAGS_TE 0x20 /* all */ +#define SCI_CTRL_FLAGS_RE 0x10 /* all */ +#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ + defined(CONFIG_CPU_SUBTYPE_SH7091) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7722) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7763) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) || \ + defined(CONFIG_CPU_SUBTYPE_SHX3) +#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7724) +#define SCI_CTRL_FLAGS_REIE ((port)->type == PORT_SCIFA ? 0 : 8) +#else +#define SCI_CTRL_FLAGS_REIE 0 +#endif +/* SCI_CTRL_FLAGS_MPIE 0x08 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +/* SCI_CTRL_FLAGS_TEIE 0x04 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +/* SCI_CTRL_FLAGS_CKE1 0x02 * all */ +/* SCI_CTRL_FLAGS_CKE0 0x01 * 7707 SCI/SCIF, 7708 SCI, 7709 SCI/SCIF, 7750 SCI */ + +/* SCxSR SCI */ +#define SCI_TDRE 0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +#define SCI_RDRF 0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +#define SCI_ORER 0x20 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +#define SCI_FER 0x10 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +#define SCI_PER 0x08 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +#define SCI_TEND 0x04 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +/* SCI_MPB 0x02 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +/* SCI_MPBT 0x01 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ + +#define SCI_ERRORS ( SCI_PER | SCI_FER | SCI_ORER) + +/* SCxSR SCIF */ +#define SCIF_ER 0x0080 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_TEND 0x0040 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_TDFE 0x0020 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_BRK 0x0010 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_FER 0x0008 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_PER 0x0004 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_RDF 0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) +# define SCIF_ORER 0x0200 +# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) +# define SCIF_RFDC_MASK 0x007f +# define SCIF_TXROOM_MAX 64 +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) +# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK ) +# define SCIF_RFDC_MASK 0x007f +# define SCIF_TXROOM_MAX 64 +/* SH7763 SCIF2 support */ +# define SCIF2_RFDC_MASK 0x001f +# define SCIF2_TXROOM_MAX 16 +#else +# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) +# define SCIF_RFDC_MASK 0x001f +# define SCIF_TXROOM_MAX 16 +#endif + +#ifndef SCIF_ORER +#define SCIF_ORER 0x0000 +#endif + +#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) +#define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS) +#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) +#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) +#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) +#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) +#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) +#define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER) + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) +# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc) +# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73) +# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf) +# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3) +#else +# define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc) +# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073) +# define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df) +# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3) +#endif + +/* SCFCR */ +#define SCFCR_RFRST 0x0002 +#define SCFCR_TFRST 0x0004 +#define SCFCR_TCRST 0x4000 +#define SCFCR_MCE 0x0008 + +#define SCI_MAJOR 204 +#define SCI_MINOR_START 8 + +/* Generic serial flags */ +#define SCI_RX_THROTTLE 0x0000001 + +#define SCI_MAGIC 0xbabeface + +/* + * Events are used to schedule things to happen at timer-interrupt + * time, instead of at rs interrupt time. + */ +#define SCI_EVENT_WRITE_WAKEUP 0 + +#define SCI_IN(size, offset) \ + if ((size) == 8) { \ + return ioread8(port->membase + (offset)); \ + } else { \ + return ioread16(port->membase + (offset)); \ + } +#define SCI_OUT(size, offset, value) \ + if ((size) == 8) { \ + iowrite8(value, port->membase + (offset)); \ + } else if ((size) == 16) { \ + iowrite16(value, port->membase + (offset)); \ + } + +#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\ + static inline unsigned int sci_##name##_in(struct uart_port *port) \ + { \ + if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \ + SCI_IN(scif_size, scif_offset) \ + } else { /* PORT_SCI or PORT_SCIFA */ \ + SCI_IN(sci_size, sci_offset); \ + } \ + } \ + static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ + { \ + if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \ + SCI_OUT(scif_size, scif_offset, value) \ + } else { /* PORT_SCI or PORT_SCIFA */ \ + SCI_OUT(sci_size, sci_offset, value); \ + } \ + } + +#ifdef CONFIG_H8300 +/* h8300 don't have SCIF */ +#define CPU_SCIF_FNS(name) \ + static inline unsigned int sci_##name##_in(struct uart_port *port) \ + { \ + return 0; \ + } \ + static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ + { \ + } +#else +#define CPU_SCIF_FNS(name, scif_offset, scif_size) \ + static inline unsigned int sci_##name##_in(struct uart_port *port) \ + { \ + SCI_IN(scif_size, scif_offset); \ + } \ + static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ + { \ + SCI_OUT(scif_size, scif_offset, value); \ + } +#endif + +#define CPU_SCI_FNS(name, sci_offset, sci_size) \ + static inline unsigned int sci_##name##_in(struct uart_port* port) \ + { \ + SCI_IN(sci_size, sci_offset); \ + } \ + static inline void sci_##name##_out(struct uart_port* port, unsigned int value) \ + { \ + SCI_OUT(sci_size, sci_offset, value); \ + } + +#if defined(CONFIG_CPU_SH3) || \ + defined(CONFIG_ARCH_SH73A0) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) +#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) +#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ + sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ + h8_sci_offset, h8_sci_size) \ + CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) +#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) +#define SCIF_FNS(name, scif_offset, scif_size) \ + CPU_SCIF_FNS(name, scif_offset, scif_size) +#elif defined(CONFIG_ARCH_SH7372) +#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) \ + CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) +#define SCIF_FNS(name, scif_offset, scif_size) \ + CPU_SCIF_FNS(name, scif_offset, scif_size) +#else +#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ + sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ + h8_sci_offset, h8_sci_size) \ + CPU_SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh3_scif_offset, sh3_scif_size) +#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIF_FNS(name, sh3_scif_offset, sh3_scif_size) +#endif +#elif defined(__H8300H__) || defined(__H8300S__) +#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ + sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ + h8_sci_offset, h8_sci_size) \ + CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size) +#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIF_FNS(name) +#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7724) + #define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) + #define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) +#else +#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ + sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ + h8_sci_offset, h8_sci_size) \ + CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) +#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) + +SCIF_FNS(SCSMR, 0x00, 16) +SCIF_FNS(SCBRR, 0x04, 8) +SCIF_FNS(SCSCR, 0x08, 16) +SCIF_FNS(SCTDSR, 0x0c, 8) +SCIF_FNS(SCFER, 0x10, 16) +SCIF_FNS(SCxSR, 0x14, 16) +SCIF_FNS(SCFCR, 0x18, 16) +SCIF_FNS(SCFDR, 0x1c, 16) +SCIF_FNS(SCxTDR, 0x20, 8) +SCIF_FNS(SCxRDR, 0x24, 8) +SCIF_FNS(SCLSR, 0x00, 0) +#elif defined(CONFIG_ARCH_SH7372) +SCIF_FNS(SCSMR, 0x00, 16) +SCIF_FNS(SCBRR, 0x04, 8) +SCIF_FNS(SCSCR, 0x08, 16) +SCIF_FNS(SCTDSR, 0x0c, 16) +SCIF_FNS(SCFER, 0x10, 16) +SCIF_FNS(SCxSR, 0x14, 16) +SCIF_FNS(SCFCR, 0x18, 16) +SCIF_FNS(SCFDR, 0x1c, 16) +SCIF_FNS(SCTFDR, 0x38, 16) +SCIF_FNS(SCRFDR, 0x3c, 16) +SCIx_FNS(SCxTDR, 0x20, 8, 0x40, 8) +SCIx_FNS(SCxRDR, 0x24, 8, 0x60, 8) +SCIF_FNS(SCLSR, 0x00, 0) +#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7724) +SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16) +SCIx_FNS(SCBRR, 0x04, 8, 0x04, 8) +SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16) +SCIx_FNS(SCxTDR, 0x20, 8, 0x0c, 8) +SCIx_FNS(SCxSR, 0x14, 16, 0x10, 16) +SCIx_FNS(SCxRDR, 0x24, 8, 0x14, 8) +SCIx_FNS(SCSPTR, 0, 0, 0, 0) +SCIF_FNS(SCTDSR, 0x0c, 8) +SCIF_FNS(SCFER, 0x10, 16) +SCIF_FNS(SCFCR, 0x18, 16) +SCIF_FNS(SCFDR, 0x1c, 16) +SCIF_FNS(SCLSR, 0x24, 16) +#else +/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/ +/* name off sz off sz off sz off sz off sz*/ +SCIx_FNS(SCSMR, 0x00, 8, 0x00, 8, 0x00, 8, 0x00, 16, 0x00, 8) +SCIx_FNS(SCBRR, 0x02, 8, 0x04, 8, 0x02, 8, 0x04, 8, 0x01, 8) +SCIx_FNS(SCSCR, 0x04, 8, 0x08, 8, 0x04, 8, 0x08, 16, 0x02, 8) +SCIx_FNS(SCxTDR, 0x06, 8, 0x0c, 8, 0x06, 8, 0x0C, 8, 0x03, 8) +SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8) +SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8) +SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) +#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) +SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) +SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) +SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) +SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) +SCIF_FNS(SCLSR, 0, 0, 0x28, 16) +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) +SCIF_FNS(SCFDR, 0, 0, 0x1C, 16) +SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16) +SCIF_FNS(SCLSR2, 0, 0, 0x24, 16) +SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) +SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) +SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) +SCIF_FNS(SCLSR, 0, 0, 0x28, 16) +#else +SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) +#if defined(CONFIG_CPU_SUBTYPE_SH7722) +SCIF_FNS(SCSPTR, 0, 0, 0, 0) +#else +SCIF_FNS(SCSPTR, 0, 0, 0x20, 16) +#endif +SCIF_FNS(SCLSR, 0, 0, 0x24, 16) +#endif +#endif +#define sci_in(port, reg) sci_##reg##_in(port) +#define sci_out(port, reg, value) sci_##reg##_out(port, value) + +/* H8/300 series SCI pins assignment */ +#if defined(__H8300H__) || defined(__H8300S__) +static const struct __attribute__((packed)) { + int port; /* GPIO port no */ + unsigned short rx,tx; /* GPIO bit no */ +} h8300_sci_pins[] = { +#if defined(CONFIG_H83007) || defined(CONFIG_H83068) + { /* SCI0 */ + .port = H8300_GPIO_P9, + .rx = H8300_GPIO_B2, + .tx = H8300_GPIO_B0, + }, + { /* SCI1 */ + .port = H8300_GPIO_P9, + .rx = H8300_GPIO_B3, + .tx = H8300_GPIO_B1, + }, + { /* SCI2 */ + .port = H8300_GPIO_PB, + .rx = H8300_GPIO_B7, + .tx = H8300_GPIO_B6, + } +#elif defined(CONFIG_H8S2678) + { /* SCI0 */ + .port = H8300_GPIO_P3, + .rx = H8300_GPIO_B2, + .tx = H8300_GPIO_B0, + }, + { /* SCI1 */ + .port = H8300_GPIO_P3, + .rx = H8300_GPIO_B3, + .tx = H8300_GPIO_B1, + }, + { /* SCI2 */ + .port = H8300_GPIO_P5, + .rx = H8300_GPIO_B1, + .tx = H8300_GPIO_B0, + } +#endif +}; +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7708) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xfffffe80) + return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */ + return 1; +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ + defined(CONFIG_CPU_SUBTYPE_SH7091) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xffe00000) + return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ + return 1; +} +#elif defined(__H8300H__) || defined(__H8300S__) +static inline int sci_rxd_in(struct uart_port *port) +{ + int ch = (port->mapbase - SMR0) >> 3; + return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0; +} +#else /* default case for non-SCI processors */ +static inline int sci_rxd_in(struct uart_port *port) +{ + return 1; +} +#endif + +/* + * Values for the BitRate Register (SCBRR) + * + * The values are actually divisors for a frequency which can + * be internal to the SH3 (14.7456MHz) or derived from an external + * clock source. This driver assumes the internal clock is used; + * to support using an external clock source, config options or + * possibly command-line options would need to be added. + * + * Also, to support speeds below 2400 (why?) the lower 2 bits of + * the SCSMR register would also need to be set to non-zero values. + * + * -- Greg Banks 27Feb2000 + * + * Answer: The SCBRR register is only eight bits, and the value in + * it gets larger with lower baud rates. At around 2400 (depending on + * the peripherial module clock) you run out of bits. However the + * lower two bits of SCSMR allow the module clock to be divided down, + * scaling the value which is needed in SCBRR. + * + * -- Stuart Menefy - 23 May 2000 + * + * I meant, why would anyone bother with bitrates below 2400. + * + * -- Greg Banks - 7Jul2000 + * + * You "speedist"! How will I use my 110bps ASR-33 teletype with paper + * tape reader as a console! + * + * -- Mitch Davis - 15 Jul 2000 + */ + +#if (defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786)) && \ + !defined(CONFIG_SH_SH2007) +#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ + defined(CONFIG_ARCH_SH73A0) || \ + defined(CONFIG_ARCH_SH7367) || \ + defined(CONFIG_ARCH_SH7377) || \ + defined(CONFIG_ARCH_SH7372) +#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) +#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7724) +static inline int scbrr_calc(struct uart_port *port, int bps, int clk) +{ + if (port->type == PORT_SCIF) + return (clk+16*bps)/(32*bps)-1; + else + return ((clk*2)+16*bps)/(16*bps)-1; +} +#define SCBRR_VALUE(bps, clk) scbrr_calc(port, bps, clk) +#elif defined(__H8300H__) || defined(__H8300S__) +#define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1) +#else /* Generic SH */ +#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) +#endif diff --git a/drivers/tty/serial/sn_console.c b/drivers/tty/serial/sn_console.c new file mode 100644 index 000000000000..cff9a306660f --- /dev/null +++ b/drivers/tty/serial/sn_console.c @@ -0,0 +1,1085 @@ +/* + * C-Brick Serial Port (and console) driver for SGI Altix machines. + * + * This driver is NOT suitable for talking to the l1-controller for + * anything other than 'console activities' --- please use the l1 + * driver for that. + * + * + * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Contact information: Silicon Graphics, Inc., 1500 Crittenden Lane, + * Mountain View, CA 94043, or: + * + * http://www.sgi.com + * + * For further information regarding this notice, see: + * + * http://oss.sgi.com/projects/GenInfo/NoticeExplan + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for mdelay */ +#include +#include + +#include +#include +#include + +/* number of characters we can transmit to the SAL console at a time */ +#define SN_SAL_MAX_CHARS 120 + +/* 64K, when we're asynch, it must be at least printk's LOG_BUF_LEN to + * avoid losing chars, (always has to be a power of 2) */ +#define SN_SAL_BUFFER_SIZE (64 * (1 << 10)) + +#define SN_SAL_UART_FIFO_DEPTH 16 +#define SN_SAL_UART_FIFO_SPEED_CPS (9600/10) + +/* sn_transmit_chars() calling args */ +#define TRANSMIT_BUFFERED 0 +#define TRANSMIT_RAW 1 + +/* To use dynamic numbers only and not use the assigned major and minor, + * define the following.. */ + /* #define USE_DYNAMIC_MINOR 1 *//* use dynamic minor number */ +#define USE_DYNAMIC_MINOR 0 /* Don't rely on misc_register dynamic minor */ + +/* Device name we're using */ +#define DEVICE_NAME "ttySG" +#define DEVICE_NAME_DYNAMIC "ttySG0" /* need full name for misc_register */ +/* The major/minor we are using, ignored for USE_DYNAMIC_MINOR */ +#define DEVICE_MAJOR 204 +#define DEVICE_MINOR 40 + +#ifdef CONFIG_MAGIC_SYSRQ +static char sysrq_serial_str[] = "\eSYS"; +static char *sysrq_serial_ptr = sysrq_serial_str; +static unsigned long sysrq_requested; +#endif /* CONFIG_MAGIC_SYSRQ */ + +/* + * Port definition - this kinda drives it all + */ +struct sn_cons_port { + struct timer_list sc_timer; + struct uart_port sc_port; + struct sn_sal_ops { + int (*sal_puts_raw) (const char *s, int len); + int (*sal_puts) (const char *s, int len); + int (*sal_getc) (void); + int (*sal_input_pending) (void); + void (*sal_wakeup_transmit) (struct sn_cons_port *, int); + } *sc_ops; + unsigned long sc_interrupt_timeout; + int sc_is_asynch; +}; + +static struct sn_cons_port sal_console_port; +static int sn_process_input; + +/* Only used if USE_DYNAMIC_MINOR is set to 1 */ +static struct miscdevice misc; /* used with misc_register for dynamic */ + +extern void early_sn_setup(void); + +#undef DEBUG +#ifdef DEBUG +static int sn_debug_printf(const char *fmt, ...); +#define DPRINTF(x...) sn_debug_printf(x) +#else +#define DPRINTF(x...) do { } while (0) +#endif + +/* Prototypes */ +static int snt_hw_puts_raw(const char *, int); +static int snt_hw_puts_buffered(const char *, int); +static int snt_poll_getc(void); +static int snt_poll_input_pending(void); +static int snt_intr_getc(void); +static int snt_intr_input_pending(void); +static void sn_transmit_chars(struct sn_cons_port *, int); + +/* A table for polling: + */ +static struct sn_sal_ops poll_ops = { + .sal_puts_raw = snt_hw_puts_raw, + .sal_puts = snt_hw_puts_raw, + .sal_getc = snt_poll_getc, + .sal_input_pending = snt_poll_input_pending +}; + +/* A table for interrupts enabled */ +static struct sn_sal_ops intr_ops = { + .sal_puts_raw = snt_hw_puts_raw, + .sal_puts = snt_hw_puts_buffered, + .sal_getc = snt_intr_getc, + .sal_input_pending = snt_intr_input_pending, + .sal_wakeup_transmit = sn_transmit_chars +}; + +/* the console does output in two distinctly different ways: + * synchronous (raw) and asynchronous (buffered). initally, early_printk + * does synchronous output. any data written goes directly to the SAL + * to be output (incidentally, it is internally buffered by the SAL) + * after interrupts and timers are initialized and available for use, + * the console init code switches to asynchronous output. this is + * also the earliest opportunity to begin polling for console input. + * after console initialization, console output and tty (serial port) + * output is buffered and sent to the SAL asynchronously (either by + * timer callback or by UART interrupt) */ + +/* routines for running the console in polling mode */ + +/** + * snt_poll_getc - Get a character from the console in polling mode + * + */ +static int snt_poll_getc(void) +{ + int ch; + + ia64_sn_console_getc(&ch); + return ch; +} + +/** + * snt_poll_input_pending - Check if any input is waiting - polling mode. + * + */ +static int snt_poll_input_pending(void) +{ + int status, input; + + status = ia64_sn_console_check(&input); + return !status && input; +} + +/* routines for an interrupt driven console (normal) */ + +/** + * snt_intr_getc - Get a character from the console, interrupt mode + * + */ +static int snt_intr_getc(void) +{ + return ia64_sn_console_readc(); +} + +/** + * snt_intr_input_pending - Check if input is pending, interrupt mode + * + */ +static int snt_intr_input_pending(void) +{ + return ia64_sn_console_intr_status() & SAL_CONSOLE_INTR_RECV; +} + +/* these functions are polled and interrupt */ + +/** + * snt_hw_puts_raw - Send raw string to the console, polled or interrupt mode + * @s: String + * @len: Length + * + */ +static int snt_hw_puts_raw(const char *s, int len) +{ + /* this will call the PROM and not return until this is done */ + return ia64_sn_console_putb(s, len); +} + +/** + * snt_hw_puts_buffered - Send string to console, polled or interrupt mode + * @s: String + * @len: Length + * + */ +static int snt_hw_puts_buffered(const char *s, int len) +{ + /* queue data to the PROM */ + return ia64_sn_console_xmit_chars((char *)s, len); +} + +/* uart interface structs + * These functions are associated with the uart_port that the serial core + * infrastructure calls. + * + * Note: Due to how the console works, many routines are no-ops. + */ + +/** + * snp_type - What type of console are we? + * @port: Port to operate with (we ignore since we only have one port) + * + */ +static const char *snp_type(struct uart_port *port) +{ + return ("SGI SN L1"); +} + +/** + * snp_tx_empty - Is the transmitter empty? We pretend we're always empty + * @port: Port to operate on (we ignore since we only have one port) + * + */ +static unsigned int snp_tx_empty(struct uart_port *port) +{ + return 1; +} + +/** + * snp_stop_tx - stop the transmitter - no-op for us + * @port: Port to operat eon - we ignore - no-op function + * + */ +static void snp_stop_tx(struct uart_port *port) +{ +} + +/** + * snp_release_port - Free i/o and resources for port - no-op for us + * @port: Port to operate on - we ignore - no-op function + * + */ +static void snp_release_port(struct uart_port *port) +{ +} + +/** + * snp_enable_ms - Force modem status interrupts on - no-op for us + * @port: Port to operate on - we ignore - no-op function + * + */ +static void snp_enable_ms(struct uart_port *port) +{ +} + +/** + * snp_shutdown - shut down the port - free irq and disable - no-op for us + * @port: Port to shut down - we ignore + * + */ +static void snp_shutdown(struct uart_port *port) +{ +} + +/** + * snp_set_mctrl - set control lines (dtr, rts, etc) - no-op for our console + * @port: Port to operate on - we ignore + * @mctrl: Lines to set/unset - we ignore + * + */ +static void snp_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +/** + * snp_get_mctrl - get contorl line info, we just return a static value + * @port: port to operate on - we only have one port so we ignore this + * + */ +static unsigned int snp_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_RNG | TIOCM_DSR | TIOCM_CTS; +} + +/** + * snp_stop_rx - Stop the receiver - we ignor ethis + * @port: Port to operate on - we ignore + * + */ +static void snp_stop_rx(struct uart_port *port) +{ +} + +/** + * snp_start_tx - Start transmitter + * @port: Port to operate on + * + */ +static void snp_start_tx(struct uart_port *port) +{ + if (sal_console_port.sc_ops->sal_wakeup_transmit) + sal_console_port.sc_ops->sal_wakeup_transmit(&sal_console_port, + TRANSMIT_BUFFERED); + +} + +/** + * snp_break_ctl - handle breaks - ignored by us + * @port: Port to operate on + * @break_state: Break state + * + */ +static void snp_break_ctl(struct uart_port *port, int break_state) +{ +} + +/** + * snp_startup - Start up the serial port - always return 0 (We're always on) + * @port: Port to operate on + * + */ +static int snp_startup(struct uart_port *port) +{ + return 0; +} + +/** + * snp_set_termios - set termios stuff - we ignore these + * @port: port to operate on + * @termios: New settings + * @termios: Old + * + */ +static void +snp_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ +} + +/** + * snp_request_port - allocate resources for port - ignored by us + * @port: port to operate on + * + */ +static int snp_request_port(struct uart_port *port) +{ + return 0; +} + +/** + * snp_config_port - allocate resources, set up - we ignore, we're always on + * @port: Port to operate on + * @flags: flags used for port setup + * + */ +static void snp_config_port(struct uart_port *port, int flags) +{ +} + +/* Associate the uart functions above - given to serial core */ + +static struct uart_ops sn_console_ops = { + .tx_empty = snp_tx_empty, + .set_mctrl = snp_set_mctrl, + .get_mctrl = snp_get_mctrl, + .stop_tx = snp_stop_tx, + .start_tx = snp_start_tx, + .stop_rx = snp_stop_rx, + .enable_ms = snp_enable_ms, + .break_ctl = snp_break_ctl, + .startup = snp_startup, + .shutdown = snp_shutdown, + .set_termios = snp_set_termios, + .pm = NULL, + .type = snp_type, + .release_port = snp_release_port, + .request_port = snp_request_port, + .config_port = snp_config_port, + .verify_port = NULL, +}; + +/* End of uart struct functions and defines */ + +#ifdef DEBUG + +/** + * sn_debug_printf - close to hardware debugging printf + * @fmt: printf format + * + * This is as "close to the metal" as we can get, used when the driver + * itself may be broken. + * + */ +static int sn_debug_printf(const char *fmt, ...) +{ + static char printk_buf[1024]; + int printed_len; + va_list args; + + va_start(args, fmt); + printed_len = vsnprintf(printk_buf, sizeof(printk_buf), fmt, args); + + if (!sal_console_port.sc_ops) { + sal_console_port.sc_ops = &poll_ops; + early_sn_setup(); + } + sal_console_port.sc_ops->sal_puts_raw(printk_buf, printed_len); + + va_end(args); + return printed_len; +} +#endif /* DEBUG */ + +/* + * Interrupt handling routines. + */ + +/** + * sn_receive_chars - Grab characters, pass them to tty layer + * @port: Port to operate on + * @flags: irq flags + * + * Note: If we're not registered with the serial core infrastructure yet, + * we don't try to send characters to it... + * + */ +static void +sn_receive_chars(struct sn_cons_port *port, unsigned long flags) +{ + int ch; + struct tty_struct *tty; + + if (!port) { + printk(KERN_ERR "sn_receive_chars - port NULL so can't receieve\n"); + return; + } + + if (!port->sc_ops) { + printk(KERN_ERR "sn_receive_chars - port->sc_ops NULL so can't receieve\n"); + return; + } + + if (port->sc_port.state) { + /* The serial_core stuffs are initialized, use them */ + tty = port->sc_port.state->port.tty; + } + else { + /* Not registered yet - can't pass to tty layer. */ + tty = NULL; + } + + while (port->sc_ops->sal_input_pending()) { + ch = port->sc_ops->sal_getc(); + if (ch < 0) { + printk(KERN_ERR "sn_console: An error occured while " + "obtaining data from the console (0x%0x)\n", ch); + break; + } +#ifdef CONFIG_MAGIC_SYSRQ + if (sysrq_requested) { + unsigned long sysrq_timeout = sysrq_requested + HZ*5; + + sysrq_requested = 0; + if (ch && time_before(jiffies, sysrq_timeout)) { + spin_unlock_irqrestore(&port->sc_port.lock, flags); + handle_sysrq(ch); + spin_lock_irqsave(&port->sc_port.lock, flags); + /* ignore actual sysrq command char */ + continue; + } + } + if (ch == *sysrq_serial_ptr) { + if (!(*++sysrq_serial_ptr)) { + sysrq_requested = jiffies; + sysrq_serial_ptr = sysrq_serial_str; + } + /* + * ignore the whole sysrq string except for the + * leading escape + */ + if (ch != '\e') + continue; + } + else + sysrq_serial_ptr = sysrq_serial_str; +#endif /* CONFIG_MAGIC_SYSRQ */ + + /* record the character to pass up to the tty layer */ + if (tty) { + if(tty_insert_flip_char(tty, ch, TTY_NORMAL) == 0) + break; + } + port->sc_port.icount.rx++; + } + + if (tty) + tty_flip_buffer_push(tty); +} + +/** + * sn_transmit_chars - grab characters from serial core, send off + * @port: Port to operate on + * @raw: Transmit raw or buffered + * + * Note: If we're early, before we're registered with serial core, the + * writes are going through sn_sal_console_write because that's how + * register_console has been set up. We currently could have asynch + * polls calling this function due to sn_sal_switch_to_asynch but we can + * ignore them until we register with the serial core stuffs. + * + */ +static void sn_transmit_chars(struct sn_cons_port *port, int raw) +{ + int xmit_count, tail, head, loops, ii; + int result; + char *start; + struct circ_buf *xmit; + + if (!port) + return; + + BUG_ON(!port->sc_is_asynch); + + if (port->sc_port.state) { + /* We're initialized, using serial core infrastructure */ + xmit = &port->sc_port.state->xmit; + } else { + /* Probably sn_sal_switch_to_asynch has been run but serial core isn't + * initialized yet. Just return. Writes are going through + * sn_sal_console_write (due to register_console) at this time. + */ + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(&port->sc_port)) { + /* Nothing to do. */ + ia64_sn_console_intr_disable(SAL_CONSOLE_INTR_XMIT); + return; + } + + head = xmit->head; + tail = xmit->tail; + start = &xmit->buf[tail]; + + /* twice around gets the tail to the end of the buffer and + * then to the head, if needed */ + loops = (head < tail) ? 2 : 1; + + for (ii = 0; ii < loops; ii++) { + xmit_count = (head < tail) ? + (UART_XMIT_SIZE - tail) : (head - tail); + + if (xmit_count > 0) { + if (raw == TRANSMIT_RAW) + result = + port->sc_ops->sal_puts_raw(start, + xmit_count); + else + result = + port->sc_ops->sal_puts(start, xmit_count); +#ifdef DEBUG + if (!result) + DPRINTF("`"); +#endif + if (result > 0) { + xmit_count -= result; + port->sc_port.icount.tx += result; + tail += result; + tail &= UART_XMIT_SIZE - 1; + xmit->tail = tail; + start = &xmit->buf[tail]; + } + } + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&port->sc_port); + + if (uart_circ_empty(xmit)) + snp_stop_tx(&port->sc_port); /* no-op for us */ +} + +/** + * sn_sal_interrupt - Handle console interrupts + * @irq: irq #, useful for debug statements + * @dev_id: our pointer to our port (sn_cons_port which contains the uart port) + * + */ +static irqreturn_t sn_sal_interrupt(int irq, void *dev_id) +{ + struct sn_cons_port *port = (struct sn_cons_port *)dev_id; + unsigned long flags; + int status = ia64_sn_console_intr_status(); + + if (!port) + return IRQ_NONE; + + spin_lock_irqsave(&port->sc_port.lock, flags); + if (status & SAL_CONSOLE_INTR_RECV) { + sn_receive_chars(port, flags); + } + if (status & SAL_CONSOLE_INTR_XMIT) { + sn_transmit_chars(port, TRANSMIT_BUFFERED); + } + spin_unlock_irqrestore(&port->sc_port.lock, flags); + return IRQ_HANDLED; +} + +/** + * sn_sal_timer_poll - this function handles polled console mode + * @data: A pointer to our sn_cons_port (which contains the uart port) + * + * data is the pointer that init_timer will store for us. This function is + * associated with init_timer to see if there is any console traffic. + * Obviously not used in interrupt mode + * + */ +static void sn_sal_timer_poll(unsigned long data) +{ + struct sn_cons_port *port = (struct sn_cons_port *)data; + unsigned long flags; + + if (!port) + return; + + if (!port->sc_port.irq) { + spin_lock_irqsave(&port->sc_port.lock, flags); + if (sn_process_input) + sn_receive_chars(port, flags); + sn_transmit_chars(port, TRANSMIT_RAW); + spin_unlock_irqrestore(&port->sc_port.lock, flags); + mod_timer(&port->sc_timer, + jiffies + port->sc_interrupt_timeout); + } +} + +/* + * Boot-time initialization code + */ + +/** + * sn_sal_switch_to_asynch - Switch to async mode (as opposed to synch) + * @port: Our sn_cons_port (which contains the uart port) + * + * So this is used by sn_sal_serial_console_init (early on, before we're + * registered with serial core). It's also used by sn_sal_module_init + * right after we've registered with serial core. The later only happens + * if we didn't already come through here via sn_sal_serial_console_init. + * + */ +static void __init sn_sal_switch_to_asynch(struct sn_cons_port *port) +{ + unsigned long flags; + + if (!port) + return; + + DPRINTF("sn_console: about to switch to asynchronous console\n"); + + /* without early_printk, we may be invoked late enough to race + * with other cpus doing console IO at this point, however + * console interrupts will never be enabled */ + spin_lock_irqsave(&port->sc_port.lock, flags); + + /* early_printk invocation may have done this for us */ + if (!port->sc_ops) + port->sc_ops = &poll_ops; + + /* we can't turn on the console interrupt (as request_irq + * calls kmalloc, which isn't set up yet), so we rely on a + * timer to poll for input and push data from the console + * buffer. + */ + init_timer(&port->sc_timer); + port->sc_timer.function = sn_sal_timer_poll; + port->sc_timer.data = (unsigned long)port; + + if (IS_RUNNING_ON_SIMULATOR()) + port->sc_interrupt_timeout = 6; + else { + /* 960cps / 16 char FIFO = 60HZ + * HZ / (SN_SAL_FIFO_SPEED_CPS / SN_SAL_FIFO_DEPTH) */ + port->sc_interrupt_timeout = + HZ * SN_SAL_UART_FIFO_DEPTH / SN_SAL_UART_FIFO_SPEED_CPS; + } + mod_timer(&port->sc_timer, jiffies + port->sc_interrupt_timeout); + + port->sc_is_asynch = 1; + spin_unlock_irqrestore(&port->sc_port.lock, flags); +} + +/** + * sn_sal_switch_to_interrupts - Switch to interrupt driven mode + * @port: Our sn_cons_port (which contains the uart port) + * + * In sn_sal_module_init, after we're registered with serial core and + * the port is added, this function is called to switch us to interrupt + * mode. We were previously in asynch/polling mode (using init_timer). + * + * We attempt to switch to interrupt mode here by calling + * request_irq. If that works out, we enable receive interrupts. + */ +static void __init sn_sal_switch_to_interrupts(struct sn_cons_port *port) +{ + unsigned long flags; + + if (port) { + DPRINTF("sn_console: switching to interrupt driven console\n"); + + if (request_irq(SGI_UART_VECTOR, sn_sal_interrupt, + IRQF_DISABLED | IRQF_SHARED, + "SAL console driver", port) >= 0) { + spin_lock_irqsave(&port->sc_port.lock, flags); + port->sc_port.irq = SGI_UART_VECTOR; + port->sc_ops = &intr_ops; + + /* turn on receive interrupts */ + ia64_sn_console_intr_enable(SAL_CONSOLE_INTR_RECV); + spin_unlock_irqrestore(&port->sc_port.lock, flags); + } + else { + printk(KERN_INFO + "sn_console: console proceeding in polled mode\n"); + } + } +} + +/* + * Kernel console definitions + */ + +static void sn_sal_console_write(struct console *, const char *, unsigned); +static int sn_sal_console_setup(struct console *, char *); +static struct uart_driver sal_console_uart; +extern struct tty_driver *uart_console_device(struct console *, int *); + +static struct console sal_console = { + .name = DEVICE_NAME, + .write = sn_sal_console_write, + .device = uart_console_device, + .setup = sn_sal_console_setup, + .index = -1, /* unspecified */ + .data = &sal_console_uart, +}; + +#define SAL_CONSOLE &sal_console + +static struct uart_driver sal_console_uart = { + .owner = THIS_MODULE, + .driver_name = "sn_console", + .dev_name = DEVICE_NAME, + .major = 0, /* major/minor set at registration time per USE_DYNAMIC_MINOR */ + .minor = 0, + .nr = 1, /* one port */ + .cons = SAL_CONSOLE, +}; + +/** + * sn_sal_module_init - When the kernel loads us, get us rolling w/ serial core + * + * Before this is called, we've been printing kernel messages in a special + * early mode not making use of the serial core infrastructure. When our + * driver is loaded for real, we register the driver and port with serial + * core and try to enable interrupt driven mode. + * + */ +static int __init sn_sal_module_init(void) +{ + int retval; + + if (!ia64_platform_is("sn2")) + return 0; + + printk(KERN_INFO "sn_console: Console driver init\n"); + + if (USE_DYNAMIC_MINOR == 1) { + misc.minor = MISC_DYNAMIC_MINOR; + misc.name = DEVICE_NAME_DYNAMIC; + retval = misc_register(&misc); + if (retval != 0) { + printk(KERN_WARNING "Failed to register console " + "device using misc_register.\n"); + return -ENODEV; + } + sal_console_uart.major = MISC_MAJOR; + sal_console_uart.minor = misc.minor; + } else { + sal_console_uart.major = DEVICE_MAJOR; + sal_console_uart.minor = DEVICE_MINOR; + } + + /* We register the driver and the port before switching to interrupts + * or async above so the proper uart structures are populated */ + + if (uart_register_driver(&sal_console_uart) < 0) { + printk + ("ERROR sn_sal_module_init failed uart_register_driver, line %d\n", + __LINE__); + return -ENODEV; + } + + spin_lock_init(&sal_console_port.sc_port.lock); + + /* Setup the port struct with the minimum needed */ + sal_console_port.sc_port.membase = (char *)1; /* just needs to be non-zero */ + sal_console_port.sc_port.type = PORT_16550A; + sal_console_port.sc_port.fifosize = SN_SAL_MAX_CHARS; + sal_console_port.sc_port.ops = &sn_console_ops; + sal_console_port.sc_port.line = 0; + + if (uart_add_one_port(&sal_console_uart, &sal_console_port.sc_port) < 0) { + /* error - not sure what I'd do - so I'll do nothing */ + printk(KERN_ERR "%s: unable to add port\n", __func__); + } + + /* when this driver is compiled in, the console initialization + * will have already switched us into asynchronous operation + * before we get here through the module initcalls */ + if (!sal_console_port.sc_is_asynch) { + sn_sal_switch_to_asynch(&sal_console_port); + } + + /* at this point (module_init) we can try to turn on interrupts */ + if (!IS_RUNNING_ON_SIMULATOR()) { + sn_sal_switch_to_interrupts(&sal_console_port); + } + sn_process_input = 1; + return 0; +} + +/** + * sn_sal_module_exit - When we're unloaded, remove the driver/port + * + */ +static void __exit sn_sal_module_exit(void) +{ + del_timer_sync(&sal_console_port.sc_timer); + uart_remove_one_port(&sal_console_uart, &sal_console_port.sc_port); + uart_unregister_driver(&sal_console_uart); + misc_deregister(&misc); +} + +module_init(sn_sal_module_init); +module_exit(sn_sal_module_exit); + +/** + * puts_raw_fixed - sn_sal_console_write helper for adding \r's as required + * @puts_raw : puts function to do the writing + * @s: input string + * @count: length + * + * We need a \r ahead of every \n for direct writes through + * ia64_sn_console_putb (what sal_puts_raw below actually does). + * + */ + +static void puts_raw_fixed(int (*puts_raw) (const char *s, int len), + const char *s, int count) +{ + const char *s1; + + /* Output '\r' before each '\n' */ + while ((s1 = memchr(s, '\n', count)) != NULL) { + puts_raw(s, s1 - s); + puts_raw("\r\n", 2); + count -= s1 + 1 - s; + s = s1 + 1; + } + puts_raw(s, count); +} + +/** + * sn_sal_console_write - Print statements before serial core available + * @console: Console to operate on - we ignore since we have just one + * @s: String to send + * @count: length + * + * This is referenced in the console struct. It is used for early + * console printing before we register with serial core and for things + * such as kdb. The console_lock must be held when we get here. + * + * This function has some code for trying to print output even if the lock + * is held. We try to cover the case where a lock holder could have died. + * We don't use this special case code if we're not registered with serial + * core yet. After we're registered with serial core, the only time this + * function would be used is for high level kernel output like magic sys req, + * kdb, and printk's. + */ +static void +sn_sal_console_write(struct console *co, const char *s, unsigned count) +{ + unsigned long flags = 0; + struct sn_cons_port *port = &sal_console_port; + static int stole_lock = 0; + + BUG_ON(!port->sc_is_asynch); + + /* We can't look at the xmit buffer if we're not registered with serial core + * yet. So only do the fancy recovery after registering + */ + if (!port->sc_port.state) { + /* Not yet registered with serial core - simple case */ + puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count); + return; + } + + /* somebody really wants this output, might be an + * oops, kdb, panic, etc. make sure they get it. */ + if (spin_is_locked(&port->sc_port.lock)) { + int lhead = port->sc_port.state->xmit.head; + int ltail = port->sc_port.state->xmit.tail; + int counter, got_lock = 0; + + /* + * We attempt to determine if someone has died with the + * lock. We wait ~20 secs after the head and tail ptrs + * stop moving and assume the lock holder is not functional + * and plow ahead. If the lock is freed within the time out + * period we re-get the lock and go ahead normally. We also + * remember if we have plowed ahead so that we don't have + * to wait out the time out period again - the asumption + * is that we will time out again. + */ + + for (counter = 0; counter < 150; mdelay(125), counter++) { + if (!spin_is_locked(&port->sc_port.lock) + || stole_lock) { + if (!stole_lock) { + spin_lock_irqsave(&port->sc_port.lock, + flags); + got_lock = 1; + } + break; + } else { + /* still locked */ + if ((lhead != port->sc_port.state->xmit.head) + || (ltail != + port->sc_port.state->xmit.tail)) { + lhead = + port->sc_port.state->xmit.head; + ltail = + port->sc_port.state->xmit.tail; + counter = 0; + } + } + } + /* flush anything in the serial core xmit buffer, raw */ + sn_transmit_chars(port, 1); + if (got_lock) { + spin_unlock_irqrestore(&port->sc_port.lock, flags); + stole_lock = 0; + } else { + /* fell thru */ + stole_lock = 1; + } + puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count); + } else { + stole_lock = 0; + spin_lock_irqsave(&port->sc_port.lock, flags); + sn_transmit_chars(port, 1); + spin_unlock_irqrestore(&port->sc_port.lock, flags); + + puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count); + } +} + + +/** + * sn_sal_console_setup - Set up console for early printing + * @co: Console to work with + * @options: Options to set + * + * Altix console doesn't do anything with baud rates, etc, anyway. + * + * This isn't required since not providing the setup function in the + * console struct is ok. However, other patches like KDB plop something + * here so providing it is easier. + * + */ +static int sn_sal_console_setup(struct console *co, char *options) +{ + return 0; +} + +/** + * sn_sal_console_write_early - simple early output routine + * @co - console struct + * @s - string to print + * @count - count + * + * Simple function to provide early output, before even + * sn_sal_serial_console_init is called. Referenced in the + * console struct registerd in sn_serial_console_early_setup. + * + */ +static void __init +sn_sal_console_write_early(struct console *co, const char *s, unsigned count) +{ + puts_raw_fixed(sal_console_port.sc_ops->sal_puts_raw, s, count); +} + +/* Used for very early console printing - again, before + * sn_sal_serial_console_init is run */ +static struct console sal_console_early __initdata = { + .name = "sn_sal", + .write = sn_sal_console_write_early, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +/** + * sn_serial_console_early_setup - Sets up early console output support + * + * Register a console early on... This is for output before even + * sn_sal_serial_cosnole_init is called. This function is called from + * setup.c. This allows us to do really early polled writes. When + * sn_sal_serial_console_init is called, this console is unregistered + * and a new one registered. + */ +int __init sn_serial_console_early_setup(void) +{ + if (!ia64_platform_is("sn2")) + return -1; + + sal_console_port.sc_ops = &poll_ops; + spin_lock_init(&sal_console_port.sc_port.lock); + early_sn_setup(); /* Find SAL entry points */ + register_console(&sal_console_early); + + return 0; +} + +/** + * sn_sal_serial_console_init - Early console output - set up for register + * + * This function is called when regular console init happens. Because we + * support even earlier console output with sn_serial_console_early_setup + * (called from setup.c directly), this function unregisters the really + * early console. + * + * Note: Even if setup.c doesn't register sal_console_early, unregistering + * it here doesn't hurt anything. + * + */ +static int __init sn_sal_serial_console_init(void) +{ + if (ia64_platform_is("sn2")) { + sn_sal_switch_to_asynch(&sal_console_port); + DPRINTF("sn_sal_serial_console_init : register console\n"); + register_console(&sal_console); + unregister_console(&sal_console_early); + } + return 0; +} + +console_initcall(sn_sal_serial_console_init); diff --git a/drivers/tty/serial/suncore.c b/drivers/tty/serial/suncore.c new file mode 100644 index 000000000000..6381a0282ee7 --- /dev/null +++ b/drivers/tty/serial/suncore.c @@ -0,0 +1,247 @@ +/* suncore.c + * + * Common SUN serial routines. Based entirely + * upon drivers/sbus/char/sunserial.c which is: + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * + * Adaptation to new UART layer is: + * + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "suncore.h" + +static int sunserial_current_minor = 64; + +int sunserial_register_minors(struct uart_driver *drv, int count) +{ + int err = 0; + + drv->minor = sunserial_current_minor; + drv->nr += count; + /* Register the driver on the first call */ + if (drv->nr == count) + err = uart_register_driver(drv); + if (err == 0) { + sunserial_current_minor += count; + drv->tty_driver->name_base = drv->minor - 64; + } + return err; +} +EXPORT_SYMBOL(sunserial_register_minors); + +void sunserial_unregister_minors(struct uart_driver *drv, int count) +{ + drv->nr -= count; + sunserial_current_minor -= count; + + if (drv->nr == 0) + uart_unregister_driver(drv); +} +EXPORT_SYMBOL(sunserial_unregister_minors); + +int sunserial_console_match(struct console *con, struct device_node *dp, + struct uart_driver *drv, int line, bool ignore_line) +{ + if (!con) + return 0; + + drv->cons = con; + + if (of_console_device != dp) + return 0; + + if (!ignore_line) { + int off = 0; + + if (of_console_options && + *of_console_options == 'b') + off = 1; + + if ((line & 1) != off) + return 0; + } + + if (!console_set_on_cmdline) { + con->index = line; + add_preferred_console(con->name, line, NULL); + } + return 1; +} +EXPORT_SYMBOL(sunserial_console_match); + +void sunserial_console_termios(struct console *con, struct device_node *uart_dp) +{ + const char *mode, *s; + char mode_prop[] = "ttyX-mode"; + int baud, bits, stop, cflag; + char parity; + + if (!strcmp(uart_dp->name, "rsc") || + !strcmp(uart_dp->name, "rsc-console") || + !strcmp(uart_dp->name, "rsc-control")) { + mode = of_get_property(uart_dp, + "ssp-console-modes", NULL); + if (!mode) + mode = "115200,8,n,1,-"; + } else if (!strcmp(uart_dp->name, "lom-console")) { + mode = "9600,8,n,1,-"; + } else { + struct device_node *dp; + char c; + + c = 'a'; + if (of_console_options) + c = *of_console_options; + + mode_prop[3] = c; + + dp = of_find_node_by_path("/options"); + mode = of_get_property(dp, mode_prop, NULL); + if (!mode) + mode = "9600,8,n,1,-"; + } + + cflag = CREAD | HUPCL | CLOCAL; + + s = mode; + baud = simple_strtoul(s, NULL, 0); + s = strchr(s, ','); + bits = simple_strtoul(++s, NULL, 0); + s = strchr(s, ','); + parity = *(++s); + s = strchr(s, ','); + stop = simple_strtoul(++s, NULL, 0); + s = strchr(s, ','); + /* XXX handshake is not handled here. */ + + switch (baud) { + case 150: cflag |= B150; break; + case 300: cflag |= B300; break; + case 600: cflag |= B600; break; + case 1200: cflag |= B1200; break; + case 2400: cflag |= B2400; break; + case 4800: cflag |= B4800; break; + case 9600: cflag |= B9600; break; + case 19200: cflag |= B19200; break; + case 38400: cflag |= B38400; break; + case 57600: cflag |= B57600; break; + case 115200: cflag |= B115200; break; + case 230400: cflag |= B230400; break; + case 460800: cflag |= B460800; break; + default: baud = 9600; cflag |= B9600; break; + } + + switch (bits) { + case 5: cflag |= CS5; break; + case 6: cflag |= CS6; break; + case 7: cflag |= CS7; break; + case 8: cflag |= CS8; break; + default: cflag |= CS8; break; + } + + switch (parity) { + case 'o': cflag |= (PARENB | PARODD); break; + case 'e': cflag |= PARENB; break; + case 'n': default: break; + } + + switch (stop) { + case 2: cflag |= CSTOPB; break; + case 1: default: break; + } + + con->cflag = cflag; +} + +/* Sun serial MOUSE auto baud rate detection. */ +static struct mouse_baud_cflag { + int baud; + unsigned int cflag; +} mouse_baud_table[] = { + { 1200, B1200 }, + { 2400, B2400 }, + { 4800, B4800 }, + { 9600, B9600 }, + { -1, ~0 }, + { -1, ~0 }, +}; + +unsigned int suncore_mouse_baud_cflag_next(unsigned int cflag, int *new_baud) +{ + int i; + + for (i = 0; mouse_baud_table[i].baud != -1; i++) + if (mouse_baud_table[i].cflag == (cflag & CBAUD)) + break; + + i += 1; + if (mouse_baud_table[i].baud == -1) + i = 0; + + *new_baud = mouse_baud_table[i].baud; + return mouse_baud_table[i].cflag; +} + +EXPORT_SYMBOL(suncore_mouse_baud_cflag_next); + +/* Basically, when the baud rate is wrong the mouse spits out + * breaks to us. + */ +int suncore_mouse_baud_detection(unsigned char ch, int is_break) +{ + static int mouse_got_break = 0; + static int ctr = 0; + + if (is_break) { + /* Let a few normal bytes go by before we jump the gun + * and say we need to try another baud rate. + */ + if (mouse_got_break && ctr < 8) + return 1; + + /* Ok, we need to try another baud. */ + ctr = 0; + mouse_got_break = 1; + return 2; + } + if (mouse_got_break) { + ctr++; + if (ch == 0x87) { + /* Correct baud rate determined. */ + mouse_got_break = 0; + } + return 1; + } + return 0; +} + +EXPORT_SYMBOL(suncore_mouse_baud_detection); + +static int __init suncore_init(void) +{ + return 0; +} + +static void __exit suncore_exit(void) +{ +} + +module_init(suncore_init); +module_exit(suncore_exit); + +MODULE_AUTHOR("Eddie C. Dost, David S. Miller"); +MODULE_DESCRIPTION("Sun serial common layer"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/suncore.h b/drivers/tty/serial/suncore.h new file mode 100644 index 000000000000..db2057936c31 --- /dev/null +++ b/drivers/tty/serial/suncore.h @@ -0,0 +1,33 @@ +/* suncore.h + * + * Generic SUN serial/kbd/ms layer. Based entirely + * upon drivers/sbus/char/sunserial.h which is: + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * + * Port to new UART layer is: + * + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + */ + +#ifndef _SERIAL_SUN_H +#define _SERIAL_SUN_H + +/* Serial keyboard defines for L1-A processing... */ +#define SUNKBD_RESET 0xff +#define SUNKBD_L1 0x01 +#define SUNKBD_UP 0x80 +#define SUNKBD_A 0x4d + +extern unsigned int suncore_mouse_baud_cflag_next(unsigned int, int *); +extern int suncore_mouse_baud_detection(unsigned char, int); + +extern int sunserial_register_minors(struct uart_driver *, int); +extern void sunserial_unregister_minors(struct uart_driver *, int); + +extern int sunserial_console_match(struct console *, struct device_node *, + struct uart_driver *, int, bool); +extern void sunserial_console_termios(struct console *, + struct device_node *); + +#endif /* !(_SERIAL_SUN_H) */ diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c new file mode 100644 index 000000000000..c9014868297d --- /dev/null +++ b/drivers/tty/serial/sunhv.c @@ -0,0 +1,661 @@ +/* sunhv.c: Serial driver for SUN4V hypervisor console. + * + * Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#if defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#include "suncore.h" + +#define CON_BREAK ((long)-1) +#define CON_HUP ((long)-2) + +#define IGNORE_BREAK 0x1 +#define IGNORE_ALL 0x2 + +static char *con_write_page; +static char *con_read_page; + +static int hung_up = 0; + +static void transmit_chars_putchar(struct uart_port *port, struct circ_buf *xmit) +{ + while (!uart_circ_empty(xmit)) { + long status = sun4v_con_putchar(xmit->buf[xmit->tail]); + + if (status != HV_EOK) + break; + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } +} + +static void transmit_chars_write(struct uart_port *port, struct circ_buf *xmit) +{ + while (!uart_circ_empty(xmit)) { + unsigned long ra = __pa(xmit->buf + xmit->tail); + unsigned long len, status, sent; + + len = CIRC_CNT_TO_END(xmit->head, xmit->tail, + UART_XMIT_SIZE); + status = sun4v_con_write(ra, len, &sent); + if (status != HV_EOK) + break; + xmit->tail = (xmit->tail + sent) & (UART_XMIT_SIZE - 1); + port->icount.tx += sent; + } +} + +static int receive_chars_getchar(struct uart_port *port, struct tty_struct *tty) +{ + int saw_console_brk = 0; + int limit = 10000; + + while (limit-- > 0) { + long status; + long c = sun4v_con_getchar(&status); + + if (status == HV_EWOULDBLOCK) + break; + + if (c == CON_BREAK) { + if (uart_handle_break(port)) + continue; + saw_console_brk = 1; + c = 0; + } + + if (c == CON_HUP) { + hung_up = 1; + uart_handle_dcd_change(port, 0); + } else if (hung_up) { + hung_up = 0; + uart_handle_dcd_change(port, 1); + } + + if (tty == NULL) { + uart_handle_sysrq_char(port, c); + continue; + } + + port->icount.rx++; + + if (uart_handle_sysrq_char(port, c)) + continue; + + tty_insert_flip_char(tty, c, TTY_NORMAL); + } + + return saw_console_brk; +} + +static int receive_chars_read(struct uart_port *port, struct tty_struct *tty) +{ + int saw_console_brk = 0; + int limit = 10000; + + while (limit-- > 0) { + unsigned long ra = __pa(con_read_page); + unsigned long bytes_read, i; + long stat = sun4v_con_read(ra, PAGE_SIZE, &bytes_read); + + if (stat != HV_EOK) { + bytes_read = 0; + + if (stat == CON_BREAK) { + if (uart_handle_break(port)) + continue; + saw_console_brk = 1; + *con_read_page = 0; + bytes_read = 1; + } else if (stat == CON_HUP) { + hung_up = 1; + uart_handle_dcd_change(port, 0); + continue; + } else { + /* HV_EWOULDBLOCK, etc. */ + break; + } + } + + if (hung_up) { + hung_up = 0; + uart_handle_dcd_change(port, 1); + } + + for (i = 0; i < bytes_read; i++) + uart_handle_sysrq_char(port, con_read_page[i]); + + if (tty == NULL) + continue; + + port->icount.rx += bytes_read; + + tty_insert_flip_string(tty, con_read_page, bytes_read); + } + + return saw_console_brk; +} + +struct sunhv_ops { + void (*transmit_chars)(struct uart_port *port, struct circ_buf *xmit); + int (*receive_chars)(struct uart_port *port, struct tty_struct *tty); +}; + +static struct sunhv_ops bychar_ops = { + .transmit_chars = transmit_chars_putchar, + .receive_chars = receive_chars_getchar, +}; + +static struct sunhv_ops bywrite_ops = { + .transmit_chars = transmit_chars_write, + .receive_chars = receive_chars_read, +}; + +static struct sunhv_ops *sunhv_ops = &bychar_ops; + +static struct tty_struct *receive_chars(struct uart_port *port) +{ + struct tty_struct *tty = NULL; + + if (port->state != NULL) /* Unopened serial console */ + tty = port->state->port.tty; + + if (sunhv_ops->receive_chars(port, tty)) + sun_do_break(); + + return tty; +} + +static void transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit; + + if (!port->state) + return; + + xmit = &port->state->xmit; + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + sunhv_ops->transmit_chars(port, xmit); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static irqreturn_t sunhv_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct tty_struct *tty; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + tty = receive_chars(port); + transmit_chars(port); + spin_unlock_irqrestore(&port->lock, flags); + + if (tty) + tty_flip_buffer_push(tty); + + return IRQ_HANDLED; +} + +/* port->lock is not held. */ +static unsigned int sunhv_tx_empty(struct uart_port *port) +{ + /* Transmitter is always empty for us. If the circ buffer + * is non-empty or there is an x_char pending, our caller + * will do the right thing and ignore what we return here. + */ + return TIOCSER_TEMT; +} + +/* port->lock held by caller. */ +static void sunhv_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + return; +} + +/* port->lock is held by caller and interrupts are disabled. */ +static unsigned int sunhv_get_mctrl(struct uart_port *port) +{ + return TIOCM_DSR | TIOCM_CAR | TIOCM_CTS; +} + +/* port->lock held by caller. */ +static void sunhv_stop_tx(struct uart_port *port) +{ + return; +} + +/* port->lock held by caller. */ +static void sunhv_start_tx(struct uart_port *port) +{ + transmit_chars(port); +} + +/* port->lock is not held. */ +static void sunhv_send_xchar(struct uart_port *port, char ch) +{ + unsigned long flags; + int limit = 10000; + + spin_lock_irqsave(&port->lock, flags); + + while (limit-- > 0) { + long status = sun4v_con_putchar(ch); + if (status == HV_EOK) + break; + udelay(1); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* port->lock held by caller. */ +static void sunhv_stop_rx(struct uart_port *port) +{ +} + +/* port->lock held by caller. */ +static void sunhv_enable_ms(struct uart_port *port) +{ +} + +/* port->lock is not held. */ +static void sunhv_break_ctl(struct uart_port *port, int break_state) +{ + if (break_state) { + unsigned long flags; + int limit = 10000; + + spin_lock_irqsave(&port->lock, flags); + + while (limit-- > 0) { + long status = sun4v_con_putchar(CON_BREAK); + if (status == HV_EOK) + break; + udelay(1); + } + + spin_unlock_irqrestore(&port->lock, flags); + } +} + +/* port->lock is not held. */ +static int sunhv_startup(struct uart_port *port) +{ + return 0; +} + +/* port->lock is not held. */ +static void sunhv_shutdown(struct uart_port *port) +{ +} + +/* port->lock is not held. */ +static void sunhv_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + unsigned int quot = uart_get_divisor(port, baud); + unsigned int iflag, cflag; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + iflag = termios->c_iflag; + cflag = termios->c_cflag; + + port->ignore_status_mask = 0; + if (iflag & IGNBRK) + port->ignore_status_mask |= IGNORE_BREAK; + if ((cflag & CREAD) == 0) + port->ignore_status_mask |= IGNORE_ALL; + + /* XXX */ + uart_update_timeout(port, cflag, + (port->uartclk / (16 * quot))); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *sunhv_type(struct uart_port *port) +{ + return "SUN4V HCONS"; +} + +static void sunhv_release_port(struct uart_port *port) +{ +} + +static int sunhv_request_port(struct uart_port *port) +{ + return 0; +} + +static void sunhv_config_port(struct uart_port *port, int flags) +{ +} + +static int sunhv_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static struct uart_ops sunhv_pops = { + .tx_empty = sunhv_tx_empty, + .set_mctrl = sunhv_set_mctrl, + .get_mctrl = sunhv_get_mctrl, + .stop_tx = sunhv_stop_tx, + .start_tx = sunhv_start_tx, + .send_xchar = sunhv_send_xchar, + .stop_rx = sunhv_stop_rx, + .enable_ms = sunhv_enable_ms, + .break_ctl = sunhv_break_ctl, + .startup = sunhv_startup, + .shutdown = sunhv_shutdown, + .set_termios = sunhv_set_termios, + .type = sunhv_type, + .release_port = sunhv_release_port, + .request_port = sunhv_request_port, + .config_port = sunhv_config_port, + .verify_port = sunhv_verify_port, +}; + +static struct uart_driver sunhv_reg = { + .owner = THIS_MODULE, + .driver_name = "sunhv", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + +static struct uart_port *sunhv_port; + +/* Copy 's' into the con_write_page, decoding "\n" into + * "\r\n" along the way. We have to return two lengths + * because the caller needs to know how much to advance + * 's' and also how many bytes to output via con_write_page. + */ +static int fill_con_write_page(const char *s, unsigned int n, + unsigned long *page_bytes) +{ + const char *orig_s = s; + char *p = con_write_page; + int left = PAGE_SIZE; + + while (n--) { + if (*s == '\n') { + if (left < 2) + break; + *p++ = '\r'; + left--; + } else if (left < 1) + break; + *p++ = *s++; + left--; + } + *page_bytes = p - con_write_page; + return s - orig_s; +} + +static void sunhv_console_write_paged(struct console *con, const char *s, unsigned n) +{ + struct uart_port *port = sunhv_port; + unsigned long flags; + int locked = 1; + + local_irq_save(flags); + if (port->sysrq) { + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&port->lock); + } else + spin_lock(&port->lock); + + while (n > 0) { + unsigned long ra = __pa(con_write_page); + unsigned long page_bytes; + unsigned int cpy = fill_con_write_page(s, n, + &page_bytes); + + n -= cpy; + s += cpy; + while (page_bytes > 0) { + unsigned long written; + int limit = 1000000; + + while (limit--) { + unsigned long stat; + + stat = sun4v_con_write(ra, page_bytes, + &written); + if (stat == HV_EOK) + break; + udelay(1); + } + if (limit < 0) + break; + page_bytes -= written; + ra += written; + } + } + + if (locked) + spin_unlock(&port->lock); + local_irq_restore(flags); +} + +static inline void sunhv_console_putchar(struct uart_port *port, char c) +{ + int limit = 1000000; + + while (limit-- > 0) { + long status = sun4v_con_putchar(c); + if (status == HV_EOK) + break; + udelay(1); + } +} + +static void sunhv_console_write_bychar(struct console *con, const char *s, unsigned n) +{ + struct uart_port *port = sunhv_port; + unsigned long flags; + int i, locked = 1; + + local_irq_save(flags); + if (port->sysrq) { + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&port->lock); + } else + spin_lock(&port->lock); + + for (i = 0; i < n; i++) { + if (*s == '\n') + sunhv_console_putchar(port, '\r'); + sunhv_console_putchar(port, *s++); + } + + if (locked) + spin_unlock(&port->lock); + local_irq_restore(flags); +} + +static struct console sunhv_console = { + .name = "ttyHV", + .write = sunhv_console_write_bychar, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunhv_reg, +}; + +static int __devinit hv_probe(struct platform_device *op, const struct of_device_id *match) +{ + struct uart_port *port; + unsigned long minor; + int err; + + if (op->archdata.irqs[0] == 0xffffffff) + return -ENODEV; + + port = kzalloc(sizeof(struct uart_port), GFP_KERNEL); + if (unlikely(!port)) + return -ENOMEM; + + minor = 1; + if (sun4v_hvapi_register(HV_GRP_CORE, 1, &minor) == 0 && + minor >= 1) { + err = -ENOMEM; + con_write_page = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!con_write_page) + goto out_free_port; + + con_read_page = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!con_read_page) + goto out_free_con_write_page; + + sunhv_console.write = sunhv_console_write_paged; + sunhv_ops = &bywrite_ops; + } + + sunhv_port = port; + + port->line = 0; + port->ops = &sunhv_pops; + port->type = PORT_SUNHV; + port->uartclk = ( 29491200 / 16 ); /* arbitrary */ + + port->membase = (unsigned char __iomem *) __pa(port); + + port->irq = op->archdata.irqs[0]; + + port->dev = &op->dev; + + err = sunserial_register_minors(&sunhv_reg, 1); + if (err) + goto out_free_con_read_page; + + sunserial_console_match(&sunhv_console, op->dev.of_node, + &sunhv_reg, port->line, false); + + err = uart_add_one_port(&sunhv_reg, port); + if (err) + goto out_unregister_driver; + + err = request_irq(port->irq, sunhv_interrupt, 0, "hvcons", port); + if (err) + goto out_remove_port; + + dev_set_drvdata(&op->dev, port); + + return 0; + +out_remove_port: + uart_remove_one_port(&sunhv_reg, port); + +out_unregister_driver: + sunserial_unregister_minors(&sunhv_reg, 1); + +out_free_con_read_page: + kfree(con_read_page); + +out_free_con_write_page: + kfree(con_write_page); + +out_free_port: + kfree(port); + sunhv_port = NULL; + return err; +} + +static int __devexit hv_remove(struct platform_device *dev) +{ + struct uart_port *port = dev_get_drvdata(&dev->dev); + + free_irq(port->irq, port); + + uart_remove_one_port(&sunhv_reg, port); + + sunserial_unregister_minors(&sunhv_reg, 1); + + kfree(port); + sunhv_port = NULL; + + dev_set_drvdata(&dev->dev, NULL); + + return 0; +} + +static const struct of_device_id hv_match[] = { + { + .name = "console", + .compatible = "qcn", + }, + { + .name = "console", + .compatible = "SUNW,sun4v-console", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, hv_match); + +static struct of_platform_driver hv_driver = { + .driver = { + .name = "hv", + .owner = THIS_MODULE, + .of_match_table = hv_match, + }, + .probe = hv_probe, + .remove = __devexit_p(hv_remove), +}; + +static int __init sunhv_init(void) +{ + if (tlb_type != hypervisor) + return -ENODEV; + + return of_register_platform_driver(&hv_driver); +} + +static void __exit sunhv_exit(void) +{ + of_unregister_platform_driver(&hv_driver); +} + +module_init(sunhv_init); +module_exit(sunhv_exit); + +MODULE_AUTHOR("David S. Miller"); +MODULE_DESCRIPTION("SUN4V Hypervisor console driver"); +MODULE_VERSION("2.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c new file mode 100644 index 000000000000..5b246b18f42f --- /dev/null +++ b/drivers/tty/serial/sunsab.c @@ -0,0 +1,1152 @@ +/* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC. + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 2002, 2006 David S. Miller (davem@davemloft.net) + * + * Rewrote buffer handling to use CIRC(Circular Buffer) macros. + * Maxim Krasnyanskiy + * + * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud + * rates to be programmed into the UART. Also eliminated a lot of + * duplicated code in the console setup. + * Theodore Ts'o , 2001-Oct-12 + * + * Ported to new 2.5.x UART layer. + * David S. Miller + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#include "suncore.h" +#include "sunsab.h" + +struct uart_sunsab_port { + struct uart_port port; /* Generic UART port */ + union sab82532_async_regs __iomem *regs; /* Chip registers */ + unsigned long irqflags; /* IRQ state flags */ + int dsr; /* Current DSR state */ + unsigned int cec_timeout; /* Chip poll timeout... */ + unsigned int tec_timeout; /* likewise */ + unsigned char interrupt_mask0;/* ISR0 masking */ + unsigned char interrupt_mask1;/* ISR1 masking */ + unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */ + unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */ + unsigned int gis_shift; + int type; /* SAB82532 version */ + + /* Setting configuration bits while the transmitter is active + * can cause garbage characters to get emitted by the chip. + * Therefore, we cache such writes here and do the real register + * write the next time the transmitter becomes idle. + */ + unsigned int cached_ebrg; + unsigned char cached_mode; + unsigned char cached_pvr; + unsigned char cached_dafo; +}; + +/* + * This assumes you have a 29.4912 MHz clock for your UART. + */ +#define SAB_BASE_BAUD ( 29491200 / 16 ) + +static char *sab82532_version[16] = { + "V1.0", "V2.0", "V3.2", "V(0x03)", + "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)", + "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)", + "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)" +}; + +#define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */ +#define SAB82532_MAX_CEC_TIMEOUT 50000 /* 2.5 TX CLKs (at 50 baud) */ + +#define SAB82532_RECV_FIFO_SIZE 32 /* Standard async fifo sizes */ +#define SAB82532_XMIT_FIFO_SIZE 32 + +static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up) +{ + int timeout = up->tec_timeout; + + while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout) + udelay(1); +} + +static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up) +{ + int timeout = up->cec_timeout; + + while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout) + udelay(1); +} + +static struct tty_struct * +receive_chars(struct uart_sunsab_port *up, + union sab82532_irq_status *stat) +{ + struct tty_struct *tty = NULL; + unsigned char buf[32]; + int saw_console_brk = 0; + int free_fifo = 0; + int count = 0; + int i; + + if (up->port.state != NULL) /* Unopened serial console */ + tty = up->port.state->port.tty; + + /* Read number of BYTES (Character + Status) available. */ + if (stat->sreg.isr0 & SAB82532_ISR0_RPF) { + count = SAB82532_RECV_FIFO_SIZE; + free_fifo++; + } + + if (stat->sreg.isr0 & SAB82532_ISR0_TCD) { + count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1); + free_fifo++; + } + + /* Issue a FIFO read command in case we where idle. */ + if (stat->sreg.isr0 & SAB82532_ISR0_TIME) { + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr); + return tty; + } + + if (stat->sreg.isr0 & SAB82532_ISR0_RFO) + free_fifo++; + + /* Read the FIFO. */ + for (i = 0; i < count; i++) + buf[i] = readb(&up->regs->r.rfifo[i]); + + /* Issue Receive Message Complete command. */ + if (free_fifo) { + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr); + } + + /* Count may be zero for BRK, so we check for it here */ + if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) && + (up->port.line == up->port.cons->index)) + saw_console_brk = 1; + + for (i = 0; i < count; i++) { + unsigned char ch = buf[i], flag; + + if (tty == NULL) { + uart_handle_sysrq_char(&up->port, ch); + continue; + } + + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR | + SAB82532_ISR0_RFO)) || + unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) { + /* + * For statistics only + */ + if (stat->sreg.isr1 & SAB82532_ISR1_BRK) { + stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + continue; + } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR) + up->port.icount.parity++; + else if (stat->sreg.isr0 & SAB82532_ISR0_FERR) + up->port.icount.frame++; + if (stat->sreg.isr0 & SAB82532_ISR0_RFO) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + stat->sreg.isr0 &= (up->port.read_status_mask & 0xff); + stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff); + + if (stat->sreg.isr1 & SAB82532_ISR1_BRK) { + flag = TTY_BREAK; + } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR) + flag = TTY_PARITY; + else if (stat->sreg.isr0 & SAB82532_ISR0_FERR) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + continue; + + if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 && + (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0) + tty_insert_flip_char(tty, ch, flag); + if (stat->sreg.isr0 & SAB82532_ISR0_RFO) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + + if (saw_console_brk) + sun_do_break(); + + return tty; +} + +static void sunsab_stop_tx(struct uart_port *); +static void sunsab_tx_idle(struct uart_sunsab_port *); + +static void transmit_chars(struct uart_sunsab_port *up, + union sab82532_irq_status *stat) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int i; + + if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) { + up->interrupt_mask1 |= SAB82532_IMR1_ALLS; + writeb(up->interrupt_mask1, &up->regs->w.imr1); + set_bit(SAB82532_ALLS, &up->irqflags); + } + +#if 0 /* bde@nwlink.com says this check causes problems */ + if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR)) + return; +#endif + + if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW)) + return; + + set_bit(SAB82532_XPR, &up->irqflags); + sunsab_tx_idle(up); + + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + up->interrupt_mask1 |= SAB82532_IMR1_XPR; + writeb(up->interrupt_mask1, &up->regs->w.imr1); + return; + } + + up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); + writeb(up->interrupt_mask1, &up->regs->w.imr1); + clear_bit(SAB82532_ALLS, &up->irqflags); + + /* Stuff 32 bytes into Transmit FIFO. */ + clear_bit(SAB82532_XPR, &up->irqflags); + for (i = 0; i < up->port.fifosize; i++) { + writeb(xmit->buf[xmit->tail], + &up->regs->w.xfifo[i]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + /* Issue a Transmit Frame command. */ + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + sunsab_stop_tx(&up->port); +} + +static void check_status(struct uart_sunsab_port *up, + union sab82532_irq_status *stat) +{ + if (stat->sreg.isr0 & SAB82532_ISR0_CDSC) + uart_handle_dcd_change(&up->port, + !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD)); + + if (stat->sreg.isr1 & SAB82532_ISR1_CSC) + uart_handle_cts_change(&up->port, + (readb(&up->regs->r.star) & SAB82532_STAR_CTS)); + + if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) { + up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1; + up->port.icount.dsr++; + } + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); +} + +static irqreturn_t sunsab_interrupt(int irq, void *dev_id) +{ + struct uart_sunsab_port *up = dev_id; + struct tty_struct *tty; + union sab82532_irq_status status; + unsigned long flags; + unsigned char gis; + + spin_lock_irqsave(&up->port.lock, flags); + + status.stat = 0; + gis = readb(&up->regs->r.gis) >> up->gis_shift; + if (gis & 1) + status.sreg.isr0 = readb(&up->regs->r.isr0); + if (gis & 2) + status.sreg.isr1 = readb(&up->regs->r.isr1); + + tty = NULL; + if (status.stat) { + if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | + SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) || + (status.sreg.isr1 & SAB82532_ISR1_BRK)) + tty = receive_chars(up, &status); + if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) || + (status.sreg.isr1 & SAB82532_ISR1_CSC)) + check_status(up, &status); + if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR)) + transmit_chars(up, &status); + } + + spin_unlock_irqrestore(&up->port.lock, flags); + + if (tty) + tty_flip_buffer_push(tty); + + return IRQ_HANDLED; +} + +/* port->lock is not held. */ +static unsigned int sunsab_tx_empty(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + int ret; + + /* Do not need a lock for a state test like this. */ + if (test_bit(SAB82532_ALLS, &up->irqflags)) + ret = TIOCSER_TEMT; + else + ret = 0; + + return ret; +} + +/* port->lock held by caller. */ +static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + + if (mctrl & TIOCM_RTS) { + up->cached_mode &= ~SAB82532_MODE_FRTS; + up->cached_mode |= SAB82532_MODE_RTS; + } else { + up->cached_mode |= (SAB82532_MODE_FRTS | + SAB82532_MODE_RTS); + } + if (mctrl & TIOCM_DTR) { + up->cached_pvr &= ~(up->pvr_dtr_bit); + } else { + up->cached_pvr |= up->pvr_dtr_bit; + } + + set_bit(SAB82532_REGS_PENDING, &up->irqflags); + if (test_bit(SAB82532_XPR, &up->irqflags)) + sunsab_tx_idle(up); +} + +/* port->lock is held by caller and interrupts are disabled. */ +static unsigned int sunsab_get_mctrl(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned char val; + unsigned int result; + + result = 0; + + val = readb(&up->regs->r.pvr); + result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR; + + val = readb(&up->regs->r.vstr); + result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR; + + val = readb(&up->regs->r.star); + result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0; + + return result; +} + +/* port->lock held by caller. */ +static void sunsab_stop_tx(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + + up->interrupt_mask1 |= SAB82532_IMR1_XPR; + writeb(up->interrupt_mask1, &up->regs->w.imr1); +} + +/* port->lock held by caller. */ +static void sunsab_tx_idle(struct uart_sunsab_port *up) +{ + if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) { + u8 tmp; + + clear_bit(SAB82532_REGS_PENDING, &up->irqflags); + writeb(up->cached_mode, &up->regs->rw.mode); + writeb(up->cached_pvr, &up->regs->rw.pvr); + writeb(up->cached_dafo, &up->regs->w.dafo); + + writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr); + tmp = readb(&up->regs->rw.ccr2); + tmp &= ~0xc0; + tmp |= (up->cached_ebrg >> 2) & 0xc0; + writeb(tmp, &up->regs->rw.ccr2); + } +} + +/* port->lock held by caller. */ +static void sunsab_start_tx(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + struct circ_buf *xmit = &up->port.state->xmit; + int i; + + up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); + writeb(up->interrupt_mask1, &up->regs->w.imr1); + + if (!test_bit(SAB82532_XPR, &up->irqflags)) + return; + + clear_bit(SAB82532_ALLS, &up->irqflags); + clear_bit(SAB82532_XPR, &up->irqflags); + + for (i = 0; i < up->port.fifosize; i++) { + writeb(xmit->buf[xmit->tail], + &up->regs->w.xfifo[i]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + /* Issue a Transmit Frame command. */ + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr); +} + +/* port->lock is not held. */ +static void sunsab_send_xchar(struct uart_port *port, char ch) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + sunsab_tec_wait(up); + writeb(ch, &up->regs->w.tic); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* port->lock held by caller. */ +static void sunsab_stop_rx(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + + up->interrupt_mask0 |= SAB82532_IMR0_TCD; + writeb(up->interrupt_mask1, &up->regs->w.imr0); +} + +/* port->lock held by caller. */ +static void sunsab_enable_ms(struct uart_port *port) +{ + /* For now we always receive these interrupts. */ +} + +/* port->lock is not held. */ +static void sunsab_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned long flags; + unsigned char val; + + spin_lock_irqsave(&up->port.lock, flags); + + val = up->cached_dafo; + if (break_state) + val |= SAB82532_DAFO_XBRK; + else + val &= ~SAB82532_DAFO_XBRK; + up->cached_dafo = val; + + set_bit(SAB82532_REGS_PENDING, &up->irqflags); + if (test_bit(SAB82532_XPR, &up->irqflags)) + sunsab_tx_idle(up); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* port->lock is not held. */ +static int sunsab_startup(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned long flags; + unsigned char tmp; + int err = request_irq(up->port.irq, sunsab_interrupt, + IRQF_SHARED, "sab", up); + if (err) + return err; + + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Wait for any commands or immediate characters + */ + sunsab_cec_wait(up); + sunsab_tec_wait(up); + + /* + * Clear the FIFO buffers. + */ + writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr); + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr); + + /* + * Clear the interrupt registers. + */ + (void) readb(&up->regs->r.isr0); + (void) readb(&up->regs->r.isr1); + + /* + * Now, initialize the UART + */ + writeb(0, &up->regs->w.ccr0); /* power-down */ + writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ | + SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0); + writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1); + writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL | + SAB82532_CCR2_TOE, &up->regs->w.ccr2); + writeb(0, &up->regs->w.ccr3); + writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4); + up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS | + SAB82532_MODE_RAC); + writeb(up->cached_mode, &up->regs->w.mode); + writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc); + + tmp = readb(&up->regs->rw.ccr0); + tmp |= SAB82532_CCR0_PU; /* power-up */ + writeb(tmp, &up->regs->rw.ccr0); + + /* + * Finally, enable interrupts + */ + up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR | + SAB82532_IMR0_PLLA); + writeb(up->interrupt_mask0, &up->regs->w.imr0); + up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS | + SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN | + SAB82532_IMR1_CSC | SAB82532_IMR1_XON | + SAB82532_IMR1_XPR); + writeb(up->interrupt_mask1, &up->regs->w.imr1); + set_bit(SAB82532_ALLS, &up->irqflags); + set_bit(SAB82532_XPR, &up->irqflags); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +/* port->lock is not held. */ +static void sunsab_shutdown(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + /* Disable Interrupts */ + up->interrupt_mask0 = 0xff; + writeb(up->interrupt_mask0, &up->regs->w.imr0); + up->interrupt_mask1 = 0xff; + writeb(up->interrupt_mask1, &up->regs->w.imr1); + + /* Disable break condition */ + up->cached_dafo = readb(&up->regs->rw.dafo); + up->cached_dafo &= ~SAB82532_DAFO_XBRK; + writeb(up->cached_dafo, &up->regs->rw.dafo); + + /* Disable Receiver */ + up->cached_mode &= ~SAB82532_MODE_RAC; + writeb(up->cached_mode, &up->regs->rw.mode); + + /* + * XXX FIXME + * + * If the chip is powered down here the system hangs/crashes during + * reboot or shutdown. This needs to be investigated further, + * similar behaviour occurs in 2.4 when the driver is configured + * as a module only. One hint may be that data is sometimes + * transmitted at 9600 baud during shutdown (regardless of the + * speed the chip was configured for when the port was open). + */ +#if 0 + /* Power Down */ + tmp = readb(&up->regs->rw.ccr0); + tmp &= ~SAB82532_CCR0_PU; + writeb(tmp, &up->regs->rw.ccr0); +#endif + + spin_unlock_irqrestore(&up->port.lock, flags); + free_irq(up->port.irq, up); +} + +/* + * This is used to figure out the divisor speeds. + * + * The formula is: Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)), + * + * with 0 <= N < 64 and 0 <= M < 16 + */ + +static void calc_ebrg(int baud, int *n_ret, int *m_ret) +{ + int n, m; + + if (baud == 0) { + *n_ret = 0; + *m_ret = 0; + return; + } + + /* + * We scale numbers by 10 so that we get better accuracy + * without having to use floating point. Here we increment m + * until n is within the valid range. + */ + n = (SAB_BASE_BAUD * 10) / baud; + m = 0; + while (n >= 640) { + n = n / 2; + m++; + } + n = (n+5) / 10; + /* + * We try very hard to avoid speeds with M == 0 since they may + * not work correctly for XTAL frequences above 10 MHz. + */ + if ((m == 0) && ((n & 1) == 0)) { + n = n / 2; + m++; + } + *n_ret = n - 1; + *m_ret = m; +} + +/* Internal routine, port->lock is held and local interrupts are disabled. */ +static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag, + unsigned int iflag, unsigned int baud, + unsigned int quot) +{ + unsigned char dafo; + int bits, n, m; + + /* Byte size and parity */ + switch (cflag & CSIZE) { + case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break; + case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break; + case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break; + case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break; + /* Never happens, but GCC is too dumb to figure it out */ + default: dafo = SAB82532_DAFO_CHL5; bits = 7; break; + } + + if (cflag & CSTOPB) { + dafo |= SAB82532_DAFO_STOP; + bits++; + } + + if (cflag & PARENB) { + dafo |= SAB82532_DAFO_PARE; + bits++; + } + + if (cflag & PARODD) { + dafo |= SAB82532_DAFO_PAR_ODD; + } else { + dafo |= SAB82532_DAFO_PAR_EVEN; + } + up->cached_dafo = dafo; + + calc_ebrg(baud, &n, &m); + + up->cached_ebrg = n | (m << 6); + + up->tec_timeout = (10 * 1000000) / baud; + up->cec_timeout = up->tec_timeout >> 2; + + /* CTS flow control flags */ + /* We encode read_status_mask and ignore_status_mask like so: + * + * --------------------- + * | ... | ISR1 | ISR0 | + * --------------------- + * .. 15 8 7 0 + */ + + up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | + SAB82532_ISR0_RFO | SAB82532_ISR0_RPF | + SAB82532_ISR0_CDSC); + up->port.read_status_mask |= (SAB82532_ISR1_CSC | + SAB82532_ISR1_ALLS | + SAB82532_ISR1_XPR) << 8; + if (iflag & INPCK) + up->port.read_status_mask |= (SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR); + if (iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8); + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= (SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR); + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8); + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (iflag & IGNPAR) + up->port.ignore_status_mask |= SAB82532_ISR0_RFO; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask |= (SAB82532_ISR0_RPF | + SAB82532_ISR0_TCD); + + uart_update_timeout(&up->port, cflag, + (up->port.uartclk / (16 * quot))); + + /* Now schedule a register update when the chip's + * transmitter is idle. + */ + up->cached_mode |= SAB82532_MODE_RAC; + set_bit(SAB82532_REGS_PENDING, &up->irqflags); + if (test_bit(SAB82532_XPR, &up->irqflags)) + sunsab_tx_idle(up); +} + +/* port->lock is not held. */ +static void sunsab_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned long flags; + unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + unsigned int quot = uart_get_divisor(port, baud); + + spin_lock_irqsave(&up->port.lock, flags); + sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud, quot); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static const char *sunsab_type(struct uart_port *port) +{ + struct uart_sunsab_port *up = (void *)port; + static char buf[36]; + + sprintf(buf, "SAB82532 %s", sab82532_version[up->type]); + return buf; +} + +static void sunsab_release_port(struct uart_port *port) +{ +} + +static int sunsab_request_port(struct uart_port *port) +{ + return 0; +} + +static void sunsab_config_port(struct uart_port *port, int flags) +{ +} + +static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static struct uart_ops sunsab_pops = { + .tx_empty = sunsab_tx_empty, + .set_mctrl = sunsab_set_mctrl, + .get_mctrl = sunsab_get_mctrl, + .stop_tx = sunsab_stop_tx, + .start_tx = sunsab_start_tx, + .send_xchar = sunsab_send_xchar, + .stop_rx = sunsab_stop_rx, + .enable_ms = sunsab_enable_ms, + .break_ctl = sunsab_break_ctl, + .startup = sunsab_startup, + .shutdown = sunsab_shutdown, + .set_termios = sunsab_set_termios, + .type = sunsab_type, + .release_port = sunsab_release_port, + .request_port = sunsab_request_port, + .config_port = sunsab_config_port, + .verify_port = sunsab_verify_port, +}; + +static struct uart_driver sunsab_reg = { + .owner = THIS_MODULE, + .driver_name = "sunsab", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + +static struct uart_sunsab_port *sunsab_ports; + +#ifdef CONFIG_SERIAL_SUNSAB_CONSOLE + +static void sunsab_console_putchar(struct uart_port *port, int c) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *)port; + + sunsab_tec_wait(up); + writeb(c, &up->regs->w.tic); +} + +static void sunsab_console_write(struct console *con, const char *s, unsigned n) +{ + struct uart_sunsab_port *up = &sunsab_ports[con->index]; + unsigned long flags; + int locked = 1; + + local_irq_save(flags); + if (up->port.sysrq) { + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); + } else + spin_lock(&up->port.lock); + + uart_console_write(&up->port, s, n, sunsab_console_putchar); + sunsab_tec_wait(up); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static int sunsab_console_setup(struct console *con, char *options) +{ + struct uart_sunsab_port *up = &sunsab_ports[con->index]; + unsigned long flags; + unsigned int baud, quot; + + /* + * The console framework calls us for each and every port + * registered. Defer the console setup until the requested + * port has been properly discovered. A bit of a hack, + * though... + */ + if (up->port.type != PORT_SUNSAB) + return -1; + + printk("Console: ttyS%d (SAB82532)\n", + (sunsab_reg.minor - 64) + con->index); + + sunserial_console_termios(con, up->port.dev->of_node); + + switch (con->cflag & CBAUD) { + case B150: baud = 150; break; + case B300: baud = 300; break; + case B600: baud = 600; break; + case B1200: baud = 1200; break; + case B2400: baud = 2400; break; + case B4800: baud = 4800; break; + default: case B9600: baud = 9600; break; + case B19200: baud = 19200; break; + case B38400: baud = 38400; break; + case B57600: baud = 57600; break; + case B115200: baud = 115200; break; + case B230400: baud = 230400; break; + case B460800: baud = 460800; break; + }; + + /* + * Temporary fix. + */ + spin_lock_init(&up->port.lock); + + /* + * Initialize the hardware + */ + sunsab_startup(&up->port); + + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Finally, enable interrupts + */ + up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR | + SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC; + writeb(up->interrupt_mask0, &up->regs->w.imr0); + up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS | + SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN | + SAB82532_IMR1_CSC | SAB82532_IMR1_XON | + SAB82532_IMR1_XPR; + writeb(up->interrupt_mask1, &up->regs->w.imr1); + + quot = uart_get_divisor(&up->port, baud); + sunsab_convert_to_sab(up, con->cflag, 0, baud, quot); + sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +static struct console sunsab_console = { + .name = "ttyS", + .write = sunsab_console_write, + .device = uart_console_device, + .setup = sunsab_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunsab_reg, +}; + +static inline struct console *SUNSAB_CONSOLE(void) +{ + return &sunsab_console; +} +#else +#define SUNSAB_CONSOLE() (NULL) +#define sunsab_console_init() do { } while (0) +#endif + +static int __devinit sunsab_init_one(struct uart_sunsab_port *up, + struct platform_device *op, + unsigned long offset, + int line) +{ + up->port.line = line; + up->port.dev = &op->dev; + + up->port.mapbase = op->resource[0].start + offset; + up->port.membase = of_ioremap(&op->resource[0], offset, + sizeof(union sab82532_async_regs), + "sab"); + if (!up->port.membase) + return -ENOMEM; + up->regs = (union sab82532_async_regs __iomem *) up->port.membase; + + up->port.irq = op->archdata.irqs[0]; + + up->port.fifosize = SAB82532_XMIT_FIFO_SIZE; + up->port.iotype = UPIO_MEM; + + writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc); + + up->port.ops = &sunsab_pops; + up->port.type = PORT_SUNSAB; + up->port.uartclk = SAB_BASE_BAUD; + + up->type = readb(&up->regs->r.vstr) & 0x0f; + writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr); + writeb(0xff, &up->regs->w.pim); + if ((up->port.line & 0x1) == 0) { + up->pvr_dsr_bit = (1 << 0); + up->pvr_dtr_bit = (1 << 1); + up->gis_shift = 2; + } else { + up->pvr_dsr_bit = (1 << 3); + up->pvr_dtr_bit = (1 << 2); + up->gis_shift = 0; + } + up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4); + writeb(up->cached_pvr, &up->regs->w.pvr); + up->cached_mode = readb(&up->regs->rw.mode); + up->cached_mode |= SAB82532_MODE_FRTS; + writeb(up->cached_mode, &up->regs->rw.mode); + up->cached_mode |= SAB82532_MODE_RTS; + writeb(up->cached_mode, &up->regs->rw.mode); + + up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT; + up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT; + + return 0; +} + +static int __devinit sab_probe(struct platform_device *op, const struct of_device_id *match) +{ + static int inst; + struct uart_sunsab_port *up; + int err; + + up = &sunsab_ports[inst * 2]; + + err = sunsab_init_one(&up[0], op, + 0, + (inst * 2) + 0); + if (err) + goto out; + + err = sunsab_init_one(&up[1], op, + sizeof(union sab82532_async_regs), + (inst * 2) + 1); + if (err) + goto out1; + + sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node, + &sunsab_reg, up[0].port.line, + false); + + sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node, + &sunsab_reg, up[1].port.line, + false); + + err = uart_add_one_port(&sunsab_reg, &up[0].port); + if (err) + goto out2; + + err = uart_add_one_port(&sunsab_reg, &up[1].port); + if (err) + goto out3; + + dev_set_drvdata(&op->dev, &up[0]); + + inst++; + + return 0; + +out3: + uart_remove_one_port(&sunsab_reg, &up[0].port); +out2: + of_iounmap(&op->resource[0], + up[1].port.membase, + sizeof(union sab82532_async_regs)); +out1: + of_iounmap(&op->resource[0], + up[0].port.membase, + sizeof(union sab82532_async_regs)); +out: + return err; +} + +static int __devexit sab_remove(struct platform_device *op) +{ + struct uart_sunsab_port *up = dev_get_drvdata(&op->dev); + + uart_remove_one_port(&sunsab_reg, &up[1].port); + uart_remove_one_port(&sunsab_reg, &up[0].port); + of_iounmap(&op->resource[0], + up[1].port.membase, + sizeof(union sab82532_async_regs)); + of_iounmap(&op->resource[0], + up[0].port.membase, + sizeof(union sab82532_async_regs)); + + dev_set_drvdata(&op->dev, NULL); + + return 0; +} + +static const struct of_device_id sab_match[] = { + { + .name = "se", + }, + { + .name = "serial", + .compatible = "sab82532", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, sab_match); + +static struct of_platform_driver sab_driver = { + .driver = { + .name = "sab", + .owner = THIS_MODULE, + .of_match_table = sab_match, + }, + .probe = sab_probe, + .remove = __devexit_p(sab_remove), +}; + +static int __init sunsab_init(void) +{ + struct device_node *dp; + int err; + int num_channels = 0; + + for_each_node_by_name(dp, "se") + num_channels += 2; + for_each_node_by_name(dp, "serial") { + if (of_device_is_compatible(dp, "sab82532")) + num_channels += 2; + } + + if (num_channels) { + sunsab_ports = kzalloc(sizeof(struct uart_sunsab_port) * + num_channels, GFP_KERNEL); + if (!sunsab_ports) + return -ENOMEM; + + err = sunserial_register_minors(&sunsab_reg, num_channels); + if (err) { + kfree(sunsab_ports); + sunsab_ports = NULL; + + return err; + } + } + + return of_register_platform_driver(&sab_driver); +} + +static void __exit sunsab_exit(void) +{ + of_unregister_platform_driver(&sab_driver); + if (sunsab_reg.nr) { + sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr); + } + + kfree(sunsab_ports); + sunsab_ports = NULL; +} + +module_init(sunsab_init); +module_exit(sunsab_exit); + +MODULE_AUTHOR("Eddie C. Dost and David S. Miller"); +MODULE_DESCRIPTION("Sun SAB82532 serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/sunsab.h b/drivers/tty/serial/sunsab.h new file mode 100644 index 000000000000..b78e1f7b8050 --- /dev/null +++ b/drivers/tty/serial/sunsab.h @@ -0,0 +1,322 @@ +/* sunsab.h: Register Definitions for the Siemens SAB82532 DUSCC + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + */ + +#ifndef _SUNSAB_H +#define _SUNSAB_H + +struct sab82532_async_rd_regs { + u8 rfifo[0x20]; /* Receive FIFO */ + u8 star; /* Status Register */ + u8 __pad1; + u8 mode; /* Mode Register */ + u8 timr; /* Timer Register */ + u8 xon; /* XON Character */ + u8 xoff; /* XOFF Character */ + u8 tcr; /* Termination Character Register */ + u8 dafo; /* Data Format */ + u8 rfc; /* RFIFO Control Register */ + u8 __pad2; + u8 rbcl; /* Receive Byte Count Low */ + u8 rbch; /* Receive Byte Count High */ + u8 ccr0; /* Channel Configuration Register 0 */ + u8 ccr1; /* Channel Configuration Register 1 */ + u8 ccr2; /* Channel Configuration Register 2 */ + u8 ccr3; /* Channel Configuration Register 3 */ + u8 __pad3[4]; + u8 vstr; /* Version Status Register */ + u8 __pad4[3]; + u8 gis; /* Global Interrupt Status */ + u8 ipc; /* Interrupt Port Configuration */ + u8 isr0; /* Interrupt Status 0 */ + u8 isr1; /* Interrupt Status 1 */ + u8 pvr; /* Port Value Register */ + u8 pis; /* Port Interrupt Status */ + u8 pcr; /* Port Configuration Register */ + u8 ccr4; /* Channel Configuration Register 4 */ +}; + +struct sab82532_async_wr_regs { + u8 xfifo[0x20]; /* Transmit FIFO */ + u8 cmdr; /* Command Register */ + u8 __pad1; + u8 mode; + u8 timr; + u8 xon; + u8 xoff; + u8 tcr; + u8 dafo; + u8 rfc; + u8 __pad2; + u8 xbcl; /* Transmit Byte Count Low */ + u8 xbch; /* Transmit Byte Count High */ + u8 ccr0; + u8 ccr1; + u8 ccr2; + u8 ccr3; + u8 tsax; /* Time-Slot Assignment Reg. Transmit */ + u8 tsar; /* Time-Slot Assignment Reg. Receive */ + u8 xccr; /* Transmit Channel Capacity Register */ + u8 rccr; /* Receive Channel Capacity Register */ + u8 bgr; /* Baud Rate Generator Register */ + u8 tic; /* Transmit Immediate Character */ + u8 mxn; /* Mask XON Character */ + u8 mxf; /* Mask XOFF Character */ + u8 iva; /* Interrupt Vector Address */ + u8 ipc; + u8 imr0; /* Interrupt Mask Register 0 */ + u8 imr1; /* Interrupt Mask Register 1 */ + u8 pvr; + u8 pim; /* Port Interrupt Mask */ + u8 pcr; + u8 ccr4; +}; + +struct sab82532_async_rw_regs { /* Read/Write registers */ + u8 __pad1[0x20]; + u8 __pad2; + u8 __pad3; + u8 mode; + u8 timr; + u8 xon; + u8 xoff; + u8 tcr; + u8 dafo; + u8 rfc; + u8 __pad4; + u8 __pad5; + u8 __pad6; + u8 ccr0; + u8 ccr1; + u8 ccr2; + u8 ccr3; + u8 __pad7; + u8 __pad8; + u8 __pad9; + u8 __pad10; + u8 __pad11; + u8 __pad12; + u8 __pad13; + u8 __pad14; + u8 __pad15; + u8 ipc; + u8 __pad16; + u8 __pad17; + u8 pvr; + u8 __pad18; + u8 pcr; + u8 ccr4; +}; + +union sab82532_async_regs { + __volatile__ struct sab82532_async_rd_regs r; + __volatile__ struct sab82532_async_wr_regs w; + __volatile__ struct sab82532_async_rw_regs rw; +}; + +union sab82532_irq_status { + unsigned short stat; + struct { + unsigned char isr0; + unsigned char isr1; + } sreg; +}; + +/* irqflags bits */ +#define SAB82532_ALLS 0x00000001 +#define SAB82532_XPR 0x00000002 +#define SAB82532_REGS_PENDING 0x00000004 + +/* RFIFO Status Byte */ +#define SAB82532_RSTAT_PE 0x80 +#define SAB82532_RSTAT_FE 0x40 +#define SAB82532_RSTAT_PARITY 0x01 + +/* Status Register (STAR) */ +#define SAB82532_STAR_XDOV 0x80 +#define SAB82532_STAR_XFW 0x40 +#define SAB82532_STAR_RFNE 0x20 +#define SAB82532_STAR_FCS 0x10 +#define SAB82532_STAR_TEC 0x08 +#define SAB82532_STAR_CEC 0x04 +#define SAB82532_STAR_CTS 0x02 + +/* Command Register (CMDR) */ +#define SAB82532_CMDR_RMC 0x80 +#define SAB82532_CMDR_RRES 0x40 +#define SAB82532_CMDR_RFRD 0x20 +#define SAB82532_CMDR_STI 0x10 +#define SAB82532_CMDR_XF 0x08 +#define SAB82532_CMDR_XRES 0x01 + +/* Mode Register (MODE) */ +#define SAB82532_MODE_FRTS 0x40 +#define SAB82532_MODE_FCTS 0x20 +#define SAB82532_MODE_FLON 0x10 +#define SAB82532_MODE_RAC 0x08 +#define SAB82532_MODE_RTS 0x04 +#define SAB82532_MODE_TRS 0x02 +#define SAB82532_MODE_TLP 0x01 + +/* Timer Register (TIMR) */ +#define SAB82532_TIMR_CNT_MASK 0xe0 +#define SAB82532_TIMR_VALUE_MASK 0x1f + +/* Data Format (DAFO) */ +#define SAB82532_DAFO_XBRK 0x40 +#define SAB82532_DAFO_STOP 0x20 +#define SAB82532_DAFO_PAR_SPACE 0x00 +#define SAB82532_DAFO_PAR_ODD 0x08 +#define SAB82532_DAFO_PAR_EVEN 0x10 +#define SAB82532_DAFO_PAR_MARK 0x18 +#define SAB82532_DAFO_PARE 0x04 +#define SAB82532_DAFO_CHL8 0x00 +#define SAB82532_DAFO_CHL7 0x01 +#define SAB82532_DAFO_CHL6 0x02 +#define SAB82532_DAFO_CHL5 0x03 + +/* RFIFO Control Register (RFC) */ +#define SAB82532_RFC_DPS 0x40 +#define SAB82532_RFC_DXS 0x20 +#define SAB82532_RFC_RFDF 0x10 +#define SAB82532_RFC_RFTH_1 0x00 +#define SAB82532_RFC_RFTH_4 0x04 +#define SAB82532_RFC_RFTH_16 0x08 +#define SAB82532_RFC_RFTH_32 0x0c +#define SAB82532_RFC_TCDE 0x01 + +/* Received Byte Count High (RBCH) */ +#define SAB82532_RBCH_DMA 0x80 +#define SAB82532_RBCH_CAS 0x20 + +/* Transmit Byte Count High (XBCH) */ +#define SAB82532_XBCH_DMA 0x80 +#define SAB82532_XBCH_CAS 0x20 +#define SAB82532_XBCH_XC 0x10 + +/* Channel Configuration Register 0 (CCR0) */ +#define SAB82532_CCR0_PU 0x80 +#define SAB82532_CCR0_MCE 0x40 +#define SAB82532_CCR0_SC_NRZ 0x00 +#define SAB82532_CCR0_SC_NRZI 0x08 +#define SAB82532_CCR0_SC_FM0 0x10 +#define SAB82532_CCR0_SC_FM1 0x14 +#define SAB82532_CCR0_SC_MANCH 0x18 +#define SAB82532_CCR0_SM_HDLC 0x00 +#define SAB82532_CCR0_SM_SDLC_LOOP 0x01 +#define SAB82532_CCR0_SM_BISYNC 0x02 +#define SAB82532_CCR0_SM_ASYNC 0x03 + +/* Channel Configuration Register 1 (CCR1) */ +#define SAB82532_CCR1_ODS 0x10 +#define SAB82532_CCR1_BCR 0x08 +#define SAB82532_CCR1_CM_MASK 0x07 + +/* Channel Configuration Register 2 (CCR2) */ +#define SAB82532_CCR2_SOC1 0x80 +#define SAB82532_CCR2_SOC0 0x40 +#define SAB82532_CCR2_BR9 0x80 +#define SAB82532_CCR2_BR8 0x40 +#define SAB82532_CCR2_BDF 0x20 +#define SAB82532_CCR2_SSEL 0x10 +#define SAB82532_CCR2_XCS0 0x20 +#define SAB82532_CCR2_RCS0 0x10 +#define SAB82532_CCR2_TOE 0x08 +#define SAB82532_CCR2_RWX 0x04 +#define SAB82532_CCR2_DIV 0x01 + +/* Channel Configuration Register 3 (CCR3) */ +#define SAB82532_CCR3_PSD 0x01 + +/* Time Slot Assignment Register Transmit (TSAX) */ +#define SAB82532_TSAX_TSNX_MASK 0xfc +#define SAB82532_TSAX_XCS2 0x02 /* see also CCR2 */ +#define SAB82532_TSAX_XCS1 0x01 + +/* Time Slot Assignment Register Receive (TSAR) */ +#define SAB82532_TSAR_TSNR_MASK 0xfc +#define SAB82532_TSAR_RCS2 0x02 /* see also CCR2 */ +#define SAB82532_TSAR_RCS1 0x01 + +/* Version Status Register (VSTR) */ +#define SAB82532_VSTR_CD 0x80 +#define SAB82532_VSTR_DPLA 0x40 +#define SAB82532_VSTR_VN_MASK 0x0f +#define SAB82532_VSTR_VN_1 0x00 +#define SAB82532_VSTR_VN_2 0x01 +#define SAB82532_VSTR_VN_3_2 0x02 + +/* Global Interrupt Status Register (GIS) */ +#define SAB82532_GIS_PI 0x80 +#define SAB82532_GIS_ISA1 0x08 +#define SAB82532_GIS_ISA0 0x04 +#define SAB82532_GIS_ISB1 0x02 +#define SAB82532_GIS_ISB0 0x01 + +/* Interrupt Vector Address (IVA) */ +#define SAB82532_IVA_MASK 0xf1 + +/* Interrupt Port Configuration (IPC) */ +#define SAB82532_IPC_VIS 0x80 +#define SAB82532_IPC_SLA1 0x10 +#define SAB82532_IPC_SLA0 0x08 +#define SAB82532_IPC_CASM 0x04 +#define SAB82532_IPC_IC_OPEN_DRAIN 0x00 +#define SAB82532_IPC_IC_ACT_LOW 0x01 +#define SAB82532_IPC_IC_ACT_HIGH 0x03 + +/* Interrupt Status Register 0 (ISR0) */ +#define SAB82532_ISR0_TCD 0x80 +#define SAB82532_ISR0_TIME 0x40 +#define SAB82532_ISR0_PERR 0x20 +#define SAB82532_ISR0_FERR 0x10 +#define SAB82532_ISR0_PLLA 0x08 +#define SAB82532_ISR0_CDSC 0x04 +#define SAB82532_ISR0_RFO 0x02 +#define SAB82532_ISR0_RPF 0x01 + +/* Interrupt Status Register 1 (ISR1) */ +#define SAB82532_ISR1_BRK 0x80 +#define SAB82532_ISR1_BRKT 0x40 +#define SAB82532_ISR1_ALLS 0x20 +#define SAB82532_ISR1_XOFF 0x10 +#define SAB82532_ISR1_TIN 0x08 +#define SAB82532_ISR1_CSC 0x04 +#define SAB82532_ISR1_XON 0x02 +#define SAB82532_ISR1_XPR 0x01 + +/* Interrupt Mask Register 0 (IMR0) */ +#define SAB82532_IMR0_TCD 0x80 +#define SAB82532_IMR0_TIME 0x40 +#define SAB82532_IMR0_PERR 0x20 +#define SAB82532_IMR0_FERR 0x10 +#define SAB82532_IMR0_PLLA 0x08 +#define SAB82532_IMR0_CDSC 0x04 +#define SAB82532_IMR0_RFO 0x02 +#define SAB82532_IMR0_RPF 0x01 + +/* Interrupt Mask Register 1 (IMR1) */ +#define SAB82532_IMR1_BRK 0x80 +#define SAB82532_IMR1_BRKT 0x40 +#define SAB82532_IMR1_ALLS 0x20 +#define SAB82532_IMR1_XOFF 0x10 +#define SAB82532_IMR1_TIN 0x08 +#define SAB82532_IMR1_CSC 0x04 +#define SAB82532_IMR1_XON 0x02 +#define SAB82532_IMR1_XPR 0x01 + +/* Port Interrupt Status Register (PIS) */ +#define SAB82532_PIS_SYNC_B 0x08 +#define SAB82532_PIS_DTR_B 0x04 +#define SAB82532_PIS_DTR_A 0x02 +#define SAB82532_PIS_SYNC_A 0x01 + +/* Channel Configuration Register 4 (CCR4) */ +#define SAB82532_CCR4_MCK4 0x80 +#define SAB82532_CCR4_EBRG 0x40 +#define SAB82532_CCR4_TST1 0x20 +#define SAB82532_CCR4_ICD 0x10 + + +#endif /* !(_SUNSAB_H) */ diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c new file mode 100644 index 000000000000..551ebfe3ccbb --- /dev/null +++ b/drivers/tty/serial/sunsu.c @@ -0,0 +1,1608 @@ +/* + * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com) + * + * This is mainly a variation of 8250.c, credits go to authors mentioned + * therein. In fact this driver should be merged into the generic 8250.c + * infrastructure perhaps using a 8250_sparc.c module. + * + * Fixed to use tty_get_baud_rate(). + * Theodore Ts'o , 2001-Oct-12 + * + * Converted to new 2.5.x UART layer. + * David S. Miller (davem@davemloft.net), 2002-Jul-29 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_SERIO +#include +#endif +#include +#include +#include +#include + +#include +#include +#include + +#if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#include "suncore.h" + +/* We are on a NS PC87303 clocked with 24.0 MHz, which results + * in a UART clock of 1.8462 MHz. + */ +#define SU_BASE_BAUD (1846200 / 16) + +enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT }; +static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" }; + +/* + * Here we define the default xmit fifo size used for each type of UART. + */ +static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = { + { "unknown", 1, 0 }, + { "8250", 1, 0 }, + { "16450", 1, 0 }, + { "16550", 1, 0 }, + { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO }, + { "Cirrus", 1, 0 }, + { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH }, + { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, + { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO }, + { "Startech", 1, 0 }, + { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO }, + { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, + { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, + { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO } +}; + +struct uart_sunsu_port { + struct uart_port port; + unsigned char acr; + unsigned char ier; + unsigned short rev; + unsigned char lcr; + unsigned int lsr_break_flag; + unsigned int cflag; + + /* Probing information. */ + enum su_type su_type; + unsigned int type_probed; /* XXX Stupid */ + unsigned long reg_size; + +#ifdef CONFIG_SERIO + struct serio serio; + int serio_open; +#endif +}; + +static unsigned int serial_in(struct uart_sunsu_port *up, int offset) +{ + offset <<= up->port.regshift; + + switch (up->port.iotype) { + case UPIO_HUB6: + outb(up->port.hub6 - 1 + offset, up->port.iobase); + return inb(up->port.iobase + 1); + + case UPIO_MEM: + return readb(up->port.membase + offset); + + default: + return inb(up->port.iobase + offset); + } +} + +static void serial_out(struct uart_sunsu_port *up, int offset, int value) +{ +#ifndef CONFIG_SPARC64 + /* + * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are + * connected with a gate then go to SlavIO. When IRQ4 goes tristated + * gate outputs a logical one. Since we use level triggered interrupts + * we have lockup and watchdog reset. We cannot mask IRQ because + * keyboard shares IRQ with us (Word has it as Bob Smelik's design). + * This problem is similar to what Alpha people suffer, see serial.c. + */ + if (offset == UART_MCR) + value |= UART_MCR_OUT2; +#endif + offset <<= up->port.regshift; + + switch (up->port.iotype) { + case UPIO_HUB6: + outb(up->port.hub6 - 1 + offset, up->port.iobase); + outb(value, up->port.iobase + 1); + break; + + case UPIO_MEM: + writeb(value, up->port.membase + offset); + break; + + default: + outb(value, up->port.iobase + offset); + } +} + +/* + * We used to support using pause I/O for certain machines. We + * haven't supported this for a while, but just in case it's badly + * needed for certain old 386 machines, I've left these #define's + * in.... + */ +#define serial_inp(up, offset) serial_in(up, offset) +#define serial_outp(up, offset, value) serial_out(up, offset, value) + + +/* + * For the 16C950 + */ +static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value) +{ + serial_out(up, UART_SCR, offset); + serial_out(up, UART_ICR, value); +} + +#if 0 /* Unused currently */ +static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset) +{ + unsigned int value; + + serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); + serial_out(up, UART_SCR, offset); + value = serial_in(up, UART_ICR); + serial_icr_write(up, UART_ACR, up->acr); + + return value; +} +#endif + +#ifdef CONFIG_SERIAL_8250_RSA +/* + * Attempts to turn on the RSA FIFO. Returns zero on failure. + * We set the port uart clock rate if we succeed. + */ +static int __enable_rsa(struct uart_sunsu_port *up) +{ + unsigned char mode; + int result; + + mode = serial_inp(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + + if (!result) { + serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); + mode = serial_inp(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; + + return result; +} + +static void enable_rsa(struct uart_sunsu_port *up) +{ + if (up->port.type == PORT_RSA) { + if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + __enable_rsa(up); + spin_unlock_irq(&up->port.lock); + } + if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) + serial_outp(up, UART_RSA_FRR, 0); + } +} + +/* + * Attempts to turn off the RSA FIFO. Returns zero on failure. + * It is unknown why interrupts were disabled in here. However, + * the caller is expected to preserve this behaviour by grabbing + * the spinlock before calling this function. + */ +static void disable_rsa(struct uart_sunsu_port *up) +{ + unsigned char mode; + int result; + + if (up->port.type == PORT_RSA && + up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + + mode = serial_inp(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + + if (!result) { + serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); + mode = serial_inp(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; + spin_unlock_irq(&up->port.lock); + } +} +#endif /* CONFIG_SERIAL_8250_RSA */ + +static inline void __stop_tx(struct uart_sunsu_port *p) +{ + if (p->ier & UART_IER_THRI) { + p->ier &= ~UART_IER_THRI; + serial_out(p, UART_IER, p->ier); + } +} + +static void sunsu_stop_tx(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + + __stop_tx(up); + + /* + * We really want to stop the transmitter from sending. + */ + if (up->port.type == PORT_16C950) { + up->acr |= UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void sunsu_start_tx(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } + + /* + * Re-enable the transmitter if we disabled it. + */ + if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { + up->acr &= ~UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void sunsu_stop_rx(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static void sunsu_enable_ms(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static struct tty_struct * +receive_chars(struct uart_sunsu_port *up, unsigned char *status) +{ + struct tty_struct *tty = up->port.state->port.tty; + unsigned char ch, flag; + int max_count = 256; + int saw_console_brk = 0; + + do { + ch = serial_inp(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + if (up->port.cons != NULL && + up->port.line == up->port.cons->index) + saw_console_brk = 1; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + *status &= up->port.read_status_mask; + + if (up->port.cons != NULL && + up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } + + if (*status & UART_LSR_BI) { + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + if ((*status & up->port.ignore_status_mask) == 0) + tty_insert_flip_char(tty, ch, flag); + if (*status & UART_LSR_OE) + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + ignore_char: + *status = serial_inp(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + + if (saw_console_brk) + sun_do_break(); + + return tty; +} + +static void transmit_chars(struct uart_sunsu_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_outp(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_tx_stopped(&up->port)) { + sunsu_stop_tx(&up->port); + return; + } + if (uart_circ_empty(xmit)) { + __stop_tx(up); + return; + } + + count = up->port.fifosize; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + __stop_tx(up); +} + +static void check_modem_status(struct uart_sunsu_port *up) +{ + int status; + + status = serial_in(up, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); +} + +static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id) +{ + struct uart_sunsu_port *up = dev_id; + unsigned long flags; + unsigned char status; + + spin_lock_irqsave(&up->port.lock, flags); + + do { + struct tty_struct *tty; + + status = serial_inp(up, UART_LSR); + tty = NULL; + if (status & UART_LSR_DR) + tty = receive_chars(up, &status); + check_modem_status(up); + if (status & UART_LSR_THRE) + transmit_chars(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + + if (tty) + tty_flip_buffer_push(tty); + + spin_lock_irqsave(&up->port.lock, flags); + + } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return IRQ_HANDLED; +} + +/* Separate interrupt handling path for keyboard/mouse ports. */ + +static void +sunsu_change_speed(struct uart_port *port, unsigned int cflag, + unsigned int iflag, unsigned int quot); + +static void sunsu_change_mouse_baud(struct uart_sunsu_port *up) +{ + unsigned int cur_cflag = up->cflag; + int quot, new_baud; + + up->cflag &= ~CBAUD; + up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud); + + quot = up->port.uartclk / (16 * new_baud); + + sunsu_change_speed(&up->port, up->cflag, 0, quot); +} + +static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break) +{ + do { + unsigned char ch = serial_inp(up, UART_RX); + + /* Stop-A is handled by drivers/char/keyboard.c now. */ + if (up->su_type == SU_PORT_KBD) { +#ifdef CONFIG_SERIO + serio_interrupt(&up->serio, ch, 0); +#endif + } else if (up->su_type == SU_PORT_MS) { + int ret = suncore_mouse_baud_detection(ch, is_break); + + switch (ret) { + case 2: + sunsu_change_mouse_baud(up); + /* fallthru */ + case 1: + break; + + case 0: +#ifdef CONFIG_SERIO + serio_interrupt(&up->serio, ch, 0); +#endif + break; + }; + } + } while (serial_in(up, UART_LSR) & UART_LSR_DR); +} + +static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id) +{ + struct uart_sunsu_port *up = dev_id; + + if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) { + unsigned char status = serial_inp(up, UART_LSR); + + if ((status & UART_LSR_DR) || (status & UART_LSR_BI)) + receive_kbd_ms_chars(up, (status & UART_LSR_BI) != 0); + } + + return IRQ_HANDLED; +} + +static unsigned int sunsu_tx_empty(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int sunsu_get_mctrl(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned char status; + unsigned int ret; + + status = serial_in(up, UART_MSR); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + serial_out(up, UART_MCR, mcr); +} + +static void sunsu_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int sunsu_startup(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + int retval; + + if (up->port.type == PORT_16C950) { + /* Wake up and initialize UART */ + up->acr = 0; + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, UART_EFR_ECB); + serial_outp(up, UART_IER, 0); + serial_outp(up, UART_LCR, 0); + serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, UART_EFR_ECB); + serial_outp(up, UART_LCR, 0); + } + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * If this is an RSA port, see if we can kick it up to the + * higher speed clock. + */ + enable_rsa(up); +#endif + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) { + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_outp(up, UART_FCR, 0); + } + + /* + * Clear the interrupt registers. + */ + (void) serial_inp(up, UART_LSR); + (void) serial_inp(up, UART_RX); + (void) serial_inp(up, UART_IIR); + (void) serial_inp(up, UART_MSR); + + /* + * At this point, there's no way the LSR could still be 0xff; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (!(up->port.flags & UPF_BUGGY_UART) && + (serial_inp(up, UART_LSR) == 0xff)) { + printk("ttyS%d: LSR safety check engaged!\n", up->port.line); + return -ENODEV; + } + + if (up->su_type != SU_PORT_PORT) { + retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt, + IRQF_SHARED, su_typev[up->su_type], up); + } else { + retval = request_irq(up->port.irq, sunsu_serial_interrupt, + IRQF_SHARED, su_typev[up->su_type], up); + } + if (retval) { + printk("su: Cannot register IRQ %d\n", up->port.irq); + return retval; + } + + /* + * Now, initialize the UART + */ + serial_outp(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + + up->port.mctrl |= TIOCM_OUT2; + + sunsu_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_outp(up, UART_IER, up->ier); + + if (up->port.flags & UPF_FOURPORT) { + unsigned int icp; + /* + * Enable interrupts on the AST Fourport board + */ + icp = (up->port.iobase & 0xfe0) | 0x01f; + outb_p(0x80, icp); + (void) inb_p(icp); + } + + /* + * And clear the interrupt registers again for luck. + */ + (void) serial_inp(up, UART_LSR); + (void) serial_inp(up, UART_RX); + (void) serial_inp(up, UART_IIR); + (void) serial_inp(up, UART_MSR); + + return 0; +} + +static void sunsu_shutdown(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_outp(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.flags & UPF_FOURPORT) { + /* reset interrupts on the AST Fourport board */ + inb((up->port.iobase & 0xfe0) | 0x1f); + up->port.mctrl |= TIOCM_OUT1; + } else + up->port.mctrl &= ~TIOCM_OUT2; + + sunsu_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_outp(up, UART_FCR, 0); + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * Reset the RSA board back to 115kbps compat mode. + */ + disable_rsa(up); +#endif + + /* + * Read data port to reset things. + */ + (void) serial_in(up, UART_RX); + + free_irq(up->port.irq, up); +} + +static void +sunsu_change_speed(struct uart_port *port, unsigned int cflag, + unsigned int iflag, unsigned int quot) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned char cval, fcr = 0; + unsigned long flags; + + switch (cflag & CSIZE) { + case CS5: + cval = 0x00; + break; + case CS6: + cval = 0x01; + break; + case CS7: + cval = 0x02; + break; + default: + case CS8: + cval = 0x03; + break; + } + + if (cflag & CSTOPB) + cval |= 0x04; + if (cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* + * Work around a bug in the Oxford Semiconductor 952 rev B + * chip which causes it to seriously miscalculate baud rates + * when DLL is 0. + */ + if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 && + up->rev == 0x5201) + quot ++; + + if (uart_config[up->port.type].flags & UART_USE_FIFO) { + if ((up->port.uartclk / quot) < (2400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; +#ifdef CONFIG_SERIAL_8250_RSA + else if (up->port.type == PORT_RSA) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14; +#endif + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8; + } + if (up->port.type == PORT_16750) + fcr |= UART_FCR7_64BYTE; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, cflag, (port->uartclk / (16 * quot))); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + if (uart_config[up->port.type].flags & UART_STARTECH) { + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0); + } + serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ + serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */ + serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */ + if (up->port.type == PORT_16750) + serial_outp(up, UART_FCR, fcr); /* set fcr */ + serial_outp(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; /* Save LCR */ + if (up->port.type != PORT_16750) { + if (fcr & UART_FCR_ENABLE_FIFO) { + /* emulated UARTs (Lucent Venus 167x) need two steps */ + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + } + serial_outp(up, UART_FCR, fcr); /* set fcr */ + } + + up->cflag = cflag; + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +sunsu_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud, quot; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot); +} + +static void sunsu_release_port(struct uart_port *port) +{ +} + +static int sunsu_request_port(struct uart_port *port) +{ + return 0; +} + +static void sunsu_config_port(struct uart_port *port, int flags) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + + if (flags & UART_CONFIG_TYPE) { + /* + * We are supposed to call autoconfig here, but this requires + * splitting all the OBP probing crap from the UART probing. + * We'll do it when we kill sunsu.c altogether. + */ + port->type = up->type_probed; /* XXX */ + } +} + +static int +sunsu_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static const char * +sunsu_type(struct uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static struct uart_ops sunsu_pops = { + .tx_empty = sunsu_tx_empty, + .set_mctrl = sunsu_set_mctrl, + .get_mctrl = sunsu_get_mctrl, + .stop_tx = sunsu_stop_tx, + .start_tx = sunsu_start_tx, + .stop_rx = sunsu_stop_rx, + .enable_ms = sunsu_enable_ms, + .break_ctl = sunsu_break_ctl, + .startup = sunsu_startup, + .shutdown = sunsu_shutdown, + .set_termios = sunsu_set_termios, + .type = sunsu_type, + .release_port = sunsu_release_port, + .request_port = sunsu_request_port, + .config_port = sunsu_config_port, + .verify_port = sunsu_verify_port, +}; + +#define UART_NR 4 + +static struct uart_sunsu_port sunsu_ports[UART_NR]; + +#ifdef CONFIG_SERIO + +static DEFINE_SPINLOCK(sunsu_serio_lock); + +static int sunsu_serio_write(struct serio *serio, unsigned char ch) +{ + struct uart_sunsu_port *up = serio->port_data; + unsigned long flags; + int lsr; + + spin_lock_irqsave(&sunsu_serio_lock, flags); + + do { + lsr = serial_in(up, UART_LSR); + } while (!(lsr & UART_LSR_THRE)); + + /* Send the character out. */ + serial_out(up, UART_TX, ch); + + spin_unlock_irqrestore(&sunsu_serio_lock, flags); + + return 0; +} + +static int sunsu_serio_open(struct serio *serio) +{ + struct uart_sunsu_port *up = serio->port_data; + unsigned long flags; + int ret; + + spin_lock_irqsave(&sunsu_serio_lock, flags); + if (!up->serio_open) { + up->serio_open = 1; + ret = 0; + } else + ret = -EBUSY; + spin_unlock_irqrestore(&sunsu_serio_lock, flags); + + return ret; +} + +static void sunsu_serio_close(struct serio *serio) +{ + struct uart_sunsu_port *up = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&sunsu_serio_lock, flags); + up->serio_open = 0; + spin_unlock_irqrestore(&sunsu_serio_lock, flags); +} + +#endif /* CONFIG_SERIO */ + +static void sunsu_autoconfig(struct uart_sunsu_port *up) +{ + unsigned char status1, status2, scratch, scratch2, scratch3; + unsigned char save_lcr, save_mcr; + unsigned long flags; + + if (up->su_type == SU_PORT_NONE) + return; + + up->type_probed = PORT_UNKNOWN; + up->port.iotype = UPIO_MEM; + + spin_lock_irqsave(&up->port.lock, flags); + + if (!(up->port.flags & UPF_BUGGY_UART)) { + /* + * Do a simple existence test first; if we fail this, there's + * no point trying anything else. + * + * 0x80 is used as a nonsense port to prevent against false + * positives due to ISA bus float. The assumption is that + * 0x80 is a non-existent port; which should be safe since + * include/asm/io.h also makes this assumption. + */ + scratch = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, 0); +#ifdef __i386__ + outb(0xff, 0x080); +#endif + scratch2 = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, 0x0f); +#ifdef __i386__ + outb(0, 0x080); +#endif + scratch3 = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, scratch); + if (scratch2 != 0 || scratch3 != 0x0F) + goto out; /* We failed; there's nothing here */ + } + + save_mcr = serial_in(up, UART_MCR); + save_lcr = serial_in(up, UART_LCR); + + /* + * Check to see if a UART is really there. Certain broken + * internal modems based on the Rockwell chipset fail this + * test, because they apparently don't implement the loopback + * test mode. So this test is skipped on the COM 1 through + * COM 4 ports. This *should* be safe, since no board + * manufacturer would be stupid enough to design a board + * that conflicts with COM 1-4 --- we hope! + */ + if (!(up->port.flags & UPF_SKIP_TEST)) { + serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); + status1 = serial_inp(up, UART_MSR) & 0xF0; + serial_outp(up, UART_MCR, save_mcr); + if (status1 != 0x90) + goto out; /* We failed loopback test */ + } + serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */ + serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */ + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + scratch = serial_in(up, UART_IIR) >> 6; + switch (scratch) { + case 0: + up->port.type = PORT_16450; + break; + case 1: + up->port.type = PORT_UNKNOWN; + break; + case 2: + up->port.type = PORT_16550; + break; + case 3: + up->port.type = PORT_16550A; + break; + } + if (up->port.type == PORT_16550A) { + /* Check for Startech UART's */ + serial_outp(up, UART_LCR, UART_LCR_DLAB); + if (serial_in(up, UART_EFR) == 0) { + up->port.type = PORT_16650; + } else { + serial_outp(up, UART_LCR, 0xBF); + if (serial_in(up, UART_EFR) == 0) + up->port.type = PORT_16650V2; + } + } + if (up->port.type == PORT_16550A) { + /* Check for TI 16750 */ + serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB); + serial_outp(up, UART_FCR, + UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + scratch = serial_in(up, UART_IIR) >> 5; + if (scratch == 7) { + /* + * If this is a 16750, and not a cheap UART + * clone, then it should only go into 64 byte + * mode if the UART_FCR7_64BYTE bit was set + * while UART_LCR_DLAB was latched. + */ + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_FCR, + UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + scratch = serial_in(up, UART_IIR) >> 5; + if (scratch == 6) + up->port.type = PORT_16750; + } + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + } + serial_outp(up, UART_LCR, save_lcr); + if (up->port.type == PORT_16450) { + scratch = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, 0xa5); + status1 = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, 0x5a); + status2 = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, scratch); + + if ((status1 != 0xa5) || (status2 != 0x5a)) + up->port.type = PORT_8250; + } + + up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; + + if (up->port.type == PORT_UNKNOWN) + goto out; + up->type_probed = up->port.type; /* XXX */ + + /* + * Reset the UART. + */ +#ifdef CONFIG_SERIAL_8250_RSA + if (up->port.type == PORT_RSA) + serial_outp(up, UART_RSA_FRR, 0); +#endif + serial_outp(up, UART_MCR, save_mcr); + serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT)); + serial_outp(up, UART_FCR, 0); + (void)serial_in(up, UART_RX); + serial_outp(up, UART_IER, 0); + +out: + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static struct uart_driver sunsu_reg = { + .owner = THIS_MODULE, + .driver_name = "sunsu", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + +static int __devinit sunsu_kbd_ms_init(struct uart_sunsu_port *up) +{ + int quot, baud; +#ifdef CONFIG_SERIO + struct serio *serio; +#endif + + if (up->su_type == SU_PORT_KBD) { + up->cflag = B1200 | CS8 | CLOCAL | CREAD; + baud = 1200; + } else { + up->cflag = B4800 | CS8 | CLOCAL | CREAD; + baud = 4800; + } + quot = up->port.uartclk / (16 * baud); + + sunsu_autoconfig(up); + if (up->port.type == PORT_UNKNOWN) + return -ENODEV; + + printk("%s: %s port at %llx, irq %u\n", + up->port.dev->of_node->full_name, + (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse", + (unsigned long long) up->port.mapbase, + up->port.irq); + +#ifdef CONFIG_SERIO + serio = &up->serio; + serio->port_data = up; + + serio->id.type = SERIO_RS232; + if (up->su_type == SU_PORT_KBD) { + serio->id.proto = SERIO_SUNKBD; + strlcpy(serio->name, "sukbd", sizeof(serio->name)); + } else { + serio->id.proto = SERIO_SUN; + serio->id.extra = 1; + strlcpy(serio->name, "sums", sizeof(serio->name)); + } + strlcpy(serio->phys, + (!(up->port.line & 1) ? "su/serio0" : "su/serio1"), + sizeof(serio->phys)); + + serio->write = sunsu_serio_write; + serio->open = sunsu_serio_open; + serio->close = sunsu_serio_close; + serio->dev.parent = up->port.dev; + + serio_register_port(serio); +#endif + + sunsu_change_speed(&up->port, up->cflag, 0, quot); + + sunsu_startup(&up->port); + return 0; +} + +/* + * ------------------------------------------------------------ + * Serial console driver + * ------------------------------------------------------------ + */ + +#ifdef CONFIG_SERIAL_SUNSU_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * Wait for transmitter & holding register to empty + */ +static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + udelay(1); + } +} + +static void sunsu_console_putchar(struct uart_port *port, int ch) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *)port; + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ +static void sunsu_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_sunsu_port *up = &sunsu_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + local_irq_save(flags); + if (up->port.sysrq) { + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); + } else + spin_lock(&up->port.lock); + + /* + * First save the UER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + + uart_console_write(&up->port, s, count, sunsu_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +/* + * Setup initial baud/bits/parity. We do two things here: + * - construct a cflag setting for the first su_open() + * - initialize the serial port + * Return non-zero if we didn't find a serial port. + */ +static int __init sunsu_console_setup(struct console *co, char *options) +{ + static struct ktermios dummy; + struct ktermios termios; + struct uart_port *port; + + printk("Console: ttyS%d (SU)\n", + (sunsu_reg.minor - 64) + co->index); + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + port = &sunsu_ports[co->index].port; + + /* + * Temporary fix. + */ + spin_lock_init(&port->lock); + + /* Get firmware console settings. */ + sunserial_console_termios(co, port->dev->of_node); + + memset(&termios, 0, sizeof(struct ktermios)); + termios.c_cflag = co->cflag; + port->mctrl |= TIOCM_DTR; + port->ops->set_termios(port, &termios, &dummy); + + return 0; +} + +static struct console sunsu_console = { + .name = "ttyS", + .write = sunsu_console_write, + .device = uart_console_device, + .setup = sunsu_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunsu_reg, +}; + +/* + * Register console. + */ + +static inline struct console *SUNSU_CONSOLE(void) +{ + return &sunsu_console; +} +#else +#define SUNSU_CONSOLE() (NULL) +#define sunsu_serial_console_init() do { } while (0) +#endif + +static enum su_type __devinit su_get_type(struct device_node *dp) +{ + struct device_node *ap = of_find_node_by_path("/aliases"); + + if (ap) { + const char *keyb = of_get_property(ap, "keyboard", NULL); + const char *ms = of_get_property(ap, "mouse", NULL); + + if (keyb) { + if (dp == of_find_node_by_path(keyb)) + return SU_PORT_KBD; + } + if (ms) { + if (dp == of_find_node_by_path(ms)) + return SU_PORT_MS; + } + } + + return SU_PORT_PORT; +} + +static int __devinit su_probe(struct platform_device *op, const struct of_device_id *match) +{ + static int inst; + struct device_node *dp = op->dev.of_node; + struct uart_sunsu_port *up; + struct resource *rp; + enum su_type type; + bool ignore_line; + int err; + + type = su_get_type(dp); + if (type == SU_PORT_PORT) { + if (inst >= UART_NR) + return -EINVAL; + up = &sunsu_ports[inst]; + } else { + up = kzalloc(sizeof(*up), GFP_KERNEL); + if (!up) + return -ENOMEM; + } + + up->port.line = inst; + + spin_lock_init(&up->port.lock); + + up->su_type = type; + + rp = &op->resource[0]; + up->port.mapbase = rp->start; + up->reg_size = (rp->end - rp->start) + 1; + up->port.membase = of_ioremap(rp, 0, up->reg_size, "su"); + if (!up->port.membase) { + if (type != SU_PORT_PORT) + kfree(up); + return -ENOMEM; + } + + up->port.irq = op->archdata.irqs[0]; + + up->port.dev = &op->dev; + + up->port.type = PORT_UNKNOWN; + up->port.uartclk = (SU_BASE_BAUD * 16); + + err = 0; + if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) { + err = sunsu_kbd_ms_init(up); + if (err) { + of_iounmap(&op->resource[0], + up->port.membase, up->reg_size); + kfree(up); + return err; + } + dev_set_drvdata(&op->dev, up); + + return 0; + } + + up->port.flags |= UPF_BOOT_AUTOCONF; + + sunsu_autoconfig(up); + + err = -ENODEV; + if (up->port.type == PORT_UNKNOWN) + goto out_unmap; + + up->port.ops = &sunsu_pops; + + ignore_line = false; + if (!strcmp(dp->name, "rsc-console") || + !strcmp(dp->name, "lom-console")) + ignore_line = true; + + sunserial_console_match(SUNSU_CONSOLE(), dp, + &sunsu_reg, up->port.line, + ignore_line); + err = uart_add_one_port(&sunsu_reg, &up->port); + if (err) + goto out_unmap; + + dev_set_drvdata(&op->dev, up); + + inst++; + + return 0; + +out_unmap: + of_iounmap(&op->resource[0], up->port.membase, up->reg_size); + return err; +} + +static int __devexit su_remove(struct platform_device *op) +{ + struct uart_sunsu_port *up = dev_get_drvdata(&op->dev); + bool kbdms = false; + + if (up->su_type == SU_PORT_MS || + up->su_type == SU_PORT_KBD) + kbdms = true; + + if (kbdms) { +#ifdef CONFIG_SERIO + serio_unregister_port(&up->serio); +#endif + } else if (up->port.type != PORT_UNKNOWN) + uart_remove_one_port(&sunsu_reg, &up->port); + + if (up->port.membase) + of_iounmap(&op->resource[0], up->port.membase, up->reg_size); + + if (kbdms) + kfree(up); + + dev_set_drvdata(&op->dev, NULL); + + return 0; +} + +static const struct of_device_id su_match[] = { + { + .name = "su", + }, + { + .name = "su_pnp", + }, + { + .name = "serial", + .compatible = "su", + }, + { + .type = "serial", + .compatible = "su", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, su_match); + +static struct of_platform_driver su_driver = { + .driver = { + .name = "su", + .owner = THIS_MODULE, + .of_match_table = su_match, + }, + .probe = su_probe, + .remove = __devexit_p(su_remove), +}; + +static int __init sunsu_init(void) +{ + struct device_node *dp; + int err; + int num_uart = 0; + + for_each_node_by_name(dp, "su") { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } + for_each_node_by_name(dp, "su_pnp") { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } + for_each_node_by_name(dp, "serial") { + if (of_device_is_compatible(dp, "su")) { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } + } + for_each_node_by_type(dp, "serial") { + if (of_device_is_compatible(dp, "su")) { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } + } + + if (num_uart) { + err = sunserial_register_minors(&sunsu_reg, num_uart); + if (err) + return err; + } + + err = of_register_platform_driver(&su_driver); + if (err && num_uart) + sunserial_unregister_minors(&sunsu_reg, num_uart); + + return err; +} + +static void __exit sunsu_exit(void) +{ + if (sunsu_reg.nr) + sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr); +} + +module_init(sunsu_init); +module_exit(sunsu_exit); + +MODULE_AUTHOR("Eddie C. Dost, Peter Zaitcev, and David S. Miller"); +MODULE_DESCRIPTION("Sun SU serial port driver"); +MODULE_VERSION("2.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c new file mode 100644 index 000000000000..c1967ac1c07f --- /dev/null +++ b/drivers/tty/serial/sunzilog.c @@ -0,0 +1,1655 @@ +/* sunzilog.c: Zilog serial driver for Sparc systems. + * + * Driver for Zilog serial chips found on Sun workstations and + * servers. This driver could actually be made more generic. + * + * This is based on the old drivers/sbus/char/zs.c code. A lot + * of code has been simply moved over directly from there but + * much has been rewritten. Credits therefore go out to Eddie + * C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell for their + * work there. + * + * Copyright (C) 2002, 2006, 2007 David S. Miller (davem@davemloft.net) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_SERIO +#include +#endif +#include +#include + +#include +#include +#include + +#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#include "suncore.h" +#include "sunzilog.h" + +/* On 32-bit sparcs we need to delay after register accesses + * to accommodate sun4 systems, but we do not need to flush writes. + * On 64-bit sparc we only need to flush single writes to ensure + * completion. + */ +#ifndef CONFIG_SPARC64 +#define ZSDELAY() udelay(5) +#define ZSDELAY_LONG() udelay(20) +#define ZS_WSYNC(channel) do { } while (0) +#else +#define ZSDELAY() +#define ZSDELAY_LONG() +#define ZS_WSYNC(__channel) \ + readb(&((__channel)->control)) +#endif + +#define ZS_CLOCK 4915200 /* Zilog input clock rate. */ +#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */ + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_sunzilog_port { + struct uart_port port; + + /* IRQ servicing chain. */ + struct uart_sunzilog_port *next; + + /* Current values of Zilog write registers. */ + unsigned char curregs[NUM_ZSREGS]; + + unsigned int flags; +#define SUNZILOG_FLAG_CONS_KEYB 0x00000001 +#define SUNZILOG_FLAG_CONS_MOUSE 0x00000002 +#define SUNZILOG_FLAG_IS_CONS 0x00000004 +#define SUNZILOG_FLAG_IS_KGDB 0x00000008 +#define SUNZILOG_FLAG_MODEM_STATUS 0x00000010 +#define SUNZILOG_FLAG_IS_CHANNEL_A 0x00000020 +#define SUNZILOG_FLAG_REGS_HELD 0x00000040 +#define SUNZILOG_FLAG_TX_STOPPED 0x00000080 +#define SUNZILOG_FLAG_TX_ACTIVE 0x00000100 +#define SUNZILOG_FLAG_ESCC 0x00000200 +#define SUNZILOG_FLAG_ISR_HANDLER 0x00000400 + + unsigned int cflag; + + unsigned char parity_mask; + unsigned char prev_status; + +#ifdef CONFIG_SERIO + struct serio serio; + int serio_open; +#endif +}; + +static void sunzilog_putchar(struct uart_port *port, int ch); + +#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase)) +#define UART_ZILOG(PORT) ((struct uart_sunzilog_port *)(PORT)) + +#define ZS_IS_KEYB(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_KEYB) +#define ZS_IS_MOUSE(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_MOUSE) +#define ZS_IS_CONS(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CONS) +#define ZS_IS_KGDB(UP) ((UP)->flags & SUNZILOG_FLAG_IS_KGDB) +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS) +#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CHANNEL_A) +#define ZS_REGS_HELD(UP) ((UP)->flags & SUNZILOG_FLAG_REGS_HELD) +#define ZS_TX_STOPPED(UP) ((UP)->flags & SUNZILOG_FLAG_TX_STOPPED) +#define ZS_TX_ACTIVE(UP) ((UP)->flags & SUNZILOG_FLAG_TX_ACTIVE) + +/* Reading and writing Zilog8530 registers. The delays are to make this + * driver work on the Sun4 which needs a settling delay after each chip + * register access, other machines handle this in hardware via auxiliary + * flip-flops which implement the settle time we do in software. + * + * The port lock must be held and local IRQs must be disabled + * when {read,write}_zsreg is invoked. + */ +static unsigned char read_zsreg(struct zilog_channel __iomem *channel, + unsigned char reg) +{ + unsigned char retval; + + writeb(reg, &channel->control); + ZSDELAY(); + retval = readb(&channel->control); + ZSDELAY(); + + return retval; +} + +static void write_zsreg(struct zilog_channel __iomem *channel, + unsigned char reg, unsigned char value) +{ + writeb(reg, &channel->control); + ZSDELAY(); + writeb(value, &channel->control); + ZSDELAY(); +} + +static void sunzilog_clear_fifo(struct zilog_channel __iomem *channel) +{ + int i; + + for (i = 0; i < 32; i++) { + unsigned char regval; + + regval = readb(&channel->control); + ZSDELAY(); + if (regval & Rx_CH_AV) + break; + + regval = read_zsreg(channel, R1); + readb(&channel->data); + ZSDELAY(); + + if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + } +} + +/* This function must only be called when the TX is not busy. The UART + * port lock must be held and local interrupts disabled. + */ +static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs) +{ + int i; + int escc; + unsigned char r15; + + /* Let pending transmits finish. */ + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + sunzilog_clear_fifo(channel); + + /* Disable all interrupts. */ + write_zsreg(channel, R1, + regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); + + /* Set parity, sync config, stop bits, and clock divisor. */ + write_zsreg(channel, R4, regs[R4]); + + /* Set misc. TX/RX control bits. */ + write_zsreg(channel, R10, regs[R10]); + + /* Set TX/RX controls sans the enable bits. */ + write_zsreg(channel, R3, regs[R3] & ~RxENAB); + write_zsreg(channel, R5, regs[R5] & ~TxENAB); + + /* Synchronous mode config. */ + write_zsreg(channel, R6, regs[R6]); + write_zsreg(channel, R7, regs[R7]); + + /* Don't mess with the interrupt vector (R2, unused by us) and + * master interrupt control (R9). We make sure this is setup + * properly at probe time then never touch it again. + */ + + /* Disable baud generator. */ + write_zsreg(channel, R14, regs[R14] & ~BRENAB); + + /* Clock mode control. */ + write_zsreg(channel, R11, regs[R11]); + + /* Lower and upper byte of baud rate generator divisor. */ + write_zsreg(channel, R12, regs[R12]); + write_zsreg(channel, R13, regs[R13]); + + /* Now rewrite R14, with BRENAB (if set). */ + write_zsreg(channel, R14, regs[R14]); + + /* External status interrupt control. */ + write_zsreg(channel, R15, (regs[R15] | WR7pEN) & ~FIFOEN); + + /* ESCC Extension Register */ + r15 = read_zsreg(channel, R15); + if (r15 & 0x01) { + write_zsreg(channel, R7, regs[R7p]); + + /* External status interrupt and FIFO control. */ + write_zsreg(channel, R15, regs[R15] & ~WR7pEN); + escc = 1; + } else { + /* Clear FIFO bit case it is an issue */ + regs[R15] &= ~FIFOEN; + escc = 0; + } + + /* Reset external status interrupts. */ + write_zsreg(channel, R0, RES_EXT_INT); /* First Latch */ + write_zsreg(channel, R0, RES_EXT_INT); /* Second Latch */ + + /* Rewrite R3/R5, this time without enables masked. */ + write_zsreg(channel, R3, regs[R3]); + write_zsreg(channel, R5, regs[R5]); + + /* Rewrite R1, this time without IRQ enabled masked. */ + write_zsreg(channel, R1, regs[R1]); + + return escc; +} + +/* Reprogram the Zilog channel HW registers with the copies found in the + * software state struct. If the transmitter is busy, we defer this update + * until the next TX complete interrupt. Else, we do it right now. + * + * The UART port lock must be held and local interrupts disabled. + */ +static void sunzilog_maybe_update_regs(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + if (!ZS_REGS_HELD(up)) { + if (ZS_TX_ACTIVE(up)) { + up->flags |= SUNZILOG_FLAG_REGS_HELD; + } else { + __load_zsregs(channel, up->curregs); + } + } +} + +static void sunzilog_change_mouse_baud(struct uart_sunzilog_port *up) +{ + unsigned int cur_cflag = up->cflag; + int brg, new_baud; + + up->cflag &= ~CBAUD; + up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud); + + brg = BPS_TO_BRG(new_baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + up->curregs[R12] = (brg & 0xff); + up->curregs[R13] = (brg >> 8) & 0xff; + sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(&up->port)); +} + +static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up, + unsigned char ch, int is_break) +{ + if (ZS_IS_KEYB(up)) { + /* Stop-A is handled by drivers/char/keyboard.c now. */ +#ifdef CONFIG_SERIO + if (up->serio_open) + serio_interrupt(&up->serio, ch, 0); +#endif + } else if (ZS_IS_MOUSE(up)) { + int ret = suncore_mouse_baud_detection(ch, is_break); + + switch (ret) { + case 2: + sunzilog_change_mouse_baud(up); + /* fallthru */ + case 1: + break; + + case 0: +#ifdef CONFIG_SERIO + if (up->serio_open) + serio_interrupt(&up->serio, ch, 0); +#endif + break; + }; + } +} + +static struct tty_struct * +sunzilog_receive_chars(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + struct tty_struct *tty; + unsigned char ch, r1, flag; + + tty = NULL; + if (up->port.state != NULL && /* Unopened serial console */ + up->port.state->port.tty != NULL) /* Keyboard || mouse */ + tty = up->port.state->port.tty; + + for (;;) { + + r1 = read_zsreg(channel, R1); + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + + ch = readb(&channel->control); + ZSDELAY(); + + /* This funny hack depends upon BRK_ABRT not interfering + * with the other bits we care about in R1. + */ + if (ch & BRK_ABRT) + r1 |= BRK_ABRT; + + if (!(ch & Rx_CH_AV)) + break; + + ch = readb(&channel->data); + ZSDELAY(); + + ch &= up->parity_mask; + + if (unlikely(ZS_IS_KEYB(up)) || unlikely(ZS_IS_MOUSE(up))) { + sunzilog_kbdms_receive_chars(up, ch, 0); + continue; + } + + if (tty == NULL) { + uart_handle_sysrq_char(&up->port, ch); + continue; + } + + /* A real serial line, record the character and status. */ + flag = TTY_NORMAL; + up->port.icount.rx++; + if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) { + if (r1 & BRK_ABRT) { + r1 &= ~(PAR_ERR | CRC_ERR); + up->port.icount.brk++; + if (uart_handle_break(&up->port)) + continue; + } + else if (r1 & PAR_ERR) + up->port.icount.parity++; + else if (r1 & CRC_ERR) + up->port.icount.frame++; + if (r1 & Rx_OVR) + up->port.icount.overrun++; + r1 &= up->port.read_status_mask; + if (r1 & BRK_ABRT) + flag = TTY_BREAK; + else if (r1 & PAR_ERR) + flag = TTY_PARITY; + else if (r1 & CRC_ERR) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch)) + continue; + + if (up->port.ignore_status_mask == 0xff || + (r1 & up->port.ignore_status_mask) == 0) { + tty_insert_flip_char(tty, ch, flag); + } + if (r1 & Rx_OVR) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + + return tty; +} + +static void sunzilog_status_handle(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + unsigned char status; + + status = readb(&channel->control); + ZSDELAY(); + + writeb(RES_EXT_INT, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (status & BRK_ABRT) { + if (ZS_IS_MOUSE(up)) + sunzilog_kbdms_receive_chars(up, 0, 1); + if (ZS_IS_CONS(up)) { + /* Wait for BREAK to deassert to avoid potentially + * confusing the PROM. + */ + while (1) { + status = readb(&channel->control); + ZSDELAY(); + if (!(status & BRK_ABRT)) + break; + } + sun_do_break(); + return; + } + } + + if (ZS_WANTS_MODEM_STATUS(up)) { + if (status & SYNC) + up->port.icount.dsr++; + + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. + * But it does not tell us which bit has changed, we have to keep + * track of this ourselves. + */ + if ((status ^ up->prev_status) ^ DCD) + uart_handle_dcd_change(&up->port, + (status & DCD)); + if ((status ^ up->prev_status) ^ CTS) + uart_handle_cts_change(&up->port, + (status & CTS)); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); + } + + up->prev_status = status; +} + +static void sunzilog_transmit_chars(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + struct circ_buf *xmit; + + if (ZS_IS_CONS(up)) { + unsigned char status = readb(&channel->control); + ZSDELAY(); + + /* TX still busy? Just wait for the next TX done interrupt. + * + * It can occur because of how we do serial console writes. It would + * be nice to transmit console writes just like we normally would for + * a TTY line. (ie. buffered and TX interrupt driven). That is not + * easy because console writes cannot sleep. One solution might be + * to poll on enough port->xmit space becomming free. -DaveM + */ + if (!(status & Tx_BUF_EMP)) + return; + } + + up->flags &= ~SUNZILOG_FLAG_TX_ACTIVE; + + if (ZS_REGS_HELD(up)) { + __load_zsregs(channel, up->curregs); + up->flags &= ~SUNZILOG_FLAG_REGS_HELD; + } + + if (ZS_TX_STOPPED(up)) { + up->flags &= ~SUNZILOG_FLAG_TX_STOPPED; + goto ack_tx_int; + } + + if (up->port.x_char) { + up->flags |= SUNZILOG_FLAG_TX_ACTIVE; + writeb(up->port.x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + + if (up->port.state == NULL) + goto ack_tx_int; + xmit = &up->port.state->xmit; + if (uart_circ_empty(xmit)) + goto ack_tx_int; + + if (uart_tx_stopped(&up->port)) + goto ack_tx_int; + + up->flags |= SUNZILOG_FLAG_TX_ACTIVE; + writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + return; + +ack_tx_int: + writeb(RES_Tx_P, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); +} + +static irqreturn_t sunzilog_interrupt(int irq, void *dev_id) +{ + struct uart_sunzilog_port *up = dev_id; + + while (up) { + struct zilog_channel __iomem *channel + = ZILOG_CHANNEL_FROM_PORT(&up->port); + struct tty_struct *tty; + unsigned char r3; + + spin_lock(&up->port.lock); + r3 = read_zsreg(channel, R3); + + /* Channel A */ + tty = NULL; + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHARxIP) + tty = sunzilog_receive_chars(up, channel); + if (r3 & CHAEXT) + sunzilog_status_handle(up, channel); + if (r3 & CHATxIP) + sunzilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + if (tty) + tty_flip_buffer_push(tty); + + /* Channel B */ + up = up->next; + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + + spin_lock(&up->port.lock); + tty = NULL; + if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { + writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHBRxIP) + tty = sunzilog_receive_chars(up, channel); + if (r3 & CHBEXT) + sunzilog_status_handle(up, channel); + if (r3 & CHBTxIP) + sunzilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + if (tty) + tty_flip_buffer_push(tty); + + up = up->next; + } + + return IRQ_HANDLED; +} + +/* A convenient way to quickly get R0 status. The caller must _not_ hold the + * port lock, it is acquired here. + */ +static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port) +{ + struct zilog_channel __iomem *channel; + unsigned char status; + + channel = ZILOG_CHANNEL_FROM_PORT(port); + status = readb(&channel->control); + ZSDELAY(); + + return status; +} + +/* The port lock is not held. */ +static unsigned int sunzilog_tx_empty(struct uart_port *port) +{ + unsigned long flags; + unsigned char status; + unsigned int ret; + + spin_lock_irqsave(&port->lock, flags); + + status = sunzilog_read_channel_status(port); + + spin_unlock_irqrestore(&port->lock, flags); + + if (status & Tx_BUF_EMP) + ret = TIOCSER_TEMT; + else + ret = 0; + + return ret; +} + +/* The port lock is held and interrupts are disabled. */ +static unsigned int sunzilog_get_mctrl(struct uart_port *port) +{ + unsigned char status; + unsigned int ret; + + status = sunzilog_read_channel_status(port); + + ret = 0; + if (status & DCD) + ret |= TIOCM_CAR; + if (status & SYNC) + ret |= TIOCM_DSR; + if (status & CTS) + ret |= TIOCM_CTS; + + return ret; +} + +/* The port lock is held and interrupts are disabled. */ +static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits; + + set_bits = clear_bits = 0; + + if (mctrl & TIOCM_RTS) + set_bits |= RTS; + else + clear_bits |= RTS; + if (mctrl & TIOCM_DTR) + set_bits |= DTR; + else + clear_bits |= DTR; + + /* NOTE: Not subject to 'transmitter active' rule. */ + up->curregs[R5] |= set_bits; + up->curregs[R5] &= ~clear_bits; + write_zsreg(channel, R5, up->curregs[R5]); +} + +/* The port lock is held and interrupts are disabled. */ +static void sunzilog_stop_tx(struct uart_port *port) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + + up->flags |= SUNZILOG_FLAG_TX_STOPPED; +} + +/* The port lock is held and interrupts are disabled. */ +static void sunzilog_start_tx(struct uart_port *port) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char status; + + up->flags |= SUNZILOG_FLAG_TX_ACTIVE; + up->flags &= ~SUNZILOG_FLAG_TX_STOPPED; + + status = readb(&channel->control); + ZSDELAY(); + + /* TX busy? Just wait for the TX done interrupt. */ + if (!(status & Tx_BUF_EMP)) + return; + + /* Send the first character to jump-start the TX done + * IRQ sending engine. + */ + if (port->x_char) { + writeb(port->x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + port->icount.tx++; + port->x_char = 0; + } else { + struct circ_buf *xmit = &port->state->xmit; + + writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + } +} + +/* The port lock is held. */ +static void sunzilog_stop_rx(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + struct zilog_channel __iomem *channel; + + if (ZS_IS_CONS(up)) + return; + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable all RX interrupts. */ + up->curregs[R1] &= ~RxINT_MASK; + sunzilog_maybe_update_regs(up, channel); +} + +/* The port lock is held. */ +static void sunzilog_enable_ms(struct uart_port *port) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char new_reg; + + new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE); + if (new_reg != up->curregs[R15]) { + up->curregs[R15] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R15, up->curregs[R15] & ~WR7pEN); + } +} + +/* The port lock is not held. */ +static void sunzilog_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits, new_reg; + unsigned long flags; + + set_bits = clear_bits = 0; + + if (break_state) + set_bits |= SND_BRK; + else + clear_bits |= SND_BRK; + + spin_lock_irqsave(&port->lock, flags); + + new_reg = (up->curregs[R5] | set_bits) & ~clear_bits; + if (new_reg != up->curregs[R5]) { + up->curregs[R5] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R5, up->curregs[R5]); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void __sunzilog_startup(struct uart_sunzilog_port *up) +{ + struct zilog_channel __iomem *channel; + + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + up->prev_status = readb(&channel->control); + + /* Enable receiver and transmitter. */ + up->curregs[R3] |= RxENAB; + up->curregs[R5] |= TxENAB; + + up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + sunzilog_maybe_update_regs(up, channel); +} + +static int sunzilog_startup(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + unsigned long flags; + + if (ZS_IS_CONS(up)) + return 0; + + spin_lock_irqsave(&port->lock, flags); + __sunzilog_startup(up); + spin_unlock_irqrestore(&port->lock, flags); + return 0; +} + +/* + * The test for ZS_IS_CONS is explained by the following e-mail: + ***** + * From: Russell King + * Date: Sun, 8 Dec 2002 10:18:38 +0000 + * + * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote: + * > I boot my 2.5 boxes using "console=ttyS0,9600" argument, + * > and I noticed that something is not right with reference + * > counting in this case. It seems that when the console + * > is open by kernel initially, this is not accounted + * > as an open, and uart_startup is not called. + * + * That is correct. We are unable to call uart_startup when the serial + * console is initialised because it may need to allocate memory (as + * request_irq does) and the memory allocators may not have been + * initialised. + * + * 1. initialise the port into a state where it can send characters in the + * console write method. + * + * 2. don't do the actual hardware shutdown in your shutdown() method (but + * do the normal software shutdown - ie, free irqs etc) + ***** + */ +static void sunzilog_shutdown(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + struct zilog_channel __iomem *channel; + unsigned long flags; + + if (ZS_IS_CONS(up)) + return; + + spin_lock_irqsave(&port->lock, flags); + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable receiver and transmitter. */ + up->curregs[R3] &= ~RxENAB; + up->curregs[R5] &= ~TxENAB; + + /* Disable all interrupts and BRK assertion. */ + up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + up->curregs[R5] &= ~SND_BRK; + sunzilog_maybe_update_regs(up, channel); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Shared by TTY driver and serial console setup. The port lock is held + * and local interrupts are disabled. + */ +static void +sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag, + unsigned int iflag, int brg) +{ + + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + + /* Program BAUD and clock source. */ + up->curregs[R4] &= ~XCLK_MASK; + up->curregs[R4] |= X16CLK; + up->curregs[R12] = brg & 0xff; + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRSRC | BRENAB; + + /* Character size, stop bits, and parity. */ + up->curregs[R3] &= ~RxN_MASK; + up->curregs[R5] &= ~TxN_MASK; + switch (cflag & CSIZE) { + case CS5: + up->curregs[R3] |= Rx5; + up->curregs[R5] |= Tx5; + up->parity_mask = 0x1f; + break; + case CS6: + up->curregs[R3] |= Rx6; + up->curregs[R5] |= Tx6; + up->parity_mask = 0x3f; + break; + case CS7: + up->curregs[R3] |= Rx7; + up->curregs[R5] |= Tx7; + up->parity_mask = 0x7f; + break; + case CS8: + default: + up->curregs[R3] |= Rx8; + up->curregs[R5] |= Tx8; + up->parity_mask = 0xff; + break; + }; + up->curregs[R4] &= ~0x0c; + if (cflag & CSTOPB) + up->curregs[R4] |= SB2; + else + up->curregs[R4] |= SB1; + if (cflag & PARENB) + up->curregs[R4] |= PAR_ENAB; + else + up->curregs[R4] &= ~PAR_ENAB; + if (!(cflag & PARODD)) + up->curregs[R4] |= PAR_EVEN; + else + up->curregs[R4] &= ~PAR_EVEN; + + up->port.read_status_mask = Rx_OVR; + if (iflag & INPCK) + up->port.read_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= BRK_ABRT; + + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= BRK_ABRT; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= Rx_OVR; + } + + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask = 0xff; +} + +/* The port lock is not held. */ +static void +sunzilog_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + unsigned long flags; + int baud, brg; + + baud = uart_get_baud_rate(port, termios, old, 1200, 76800); + + spin_lock_irqsave(&up->port.lock, flags); + + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + + sunzilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg); + + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->flags |= SUNZILOG_FLAG_MODEM_STATUS; + else + up->flags &= ~SUNZILOG_FLAG_MODEM_STATUS; + + up->cflag = termios->c_cflag; + + sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port)); + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static const char *sunzilog_type(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + + return (up->flags & SUNZILOG_FLAG_ESCC) ? "zs (ESCC)" : "zs"; +} + +/* We do not request/release mappings of the registers here, this + * happens at early serial probe time. + */ +static void sunzilog_release_port(struct uart_port *port) +{ +} + +static int sunzilog_request_port(struct uart_port *port) +{ + return 0; +} + +/* These do not need to do anything interesting either. */ +static void sunzilog_config_port(struct uart_port *port, int flags) +{ +} + +/* We do not support letting the user mess with the divisor, IRQ, etc. */ +static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +#ifdef CONFIG_CONSOLE_POLL +static int sunzilog_get_poll_char(struct uart_port *port) +{ + unsigned char ch, r1; + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + struct zilog_channel __iomem *channel + = ZILOG_CHANNEL_FROM_PORT(&up->port); + + + r1 = read_zsreg(channel, R1); + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + + ch = readb(&channel->control); + ZSDELAY(); + + /* This funny hack depends upon BRK_ABRT not interfering + * with the other bits we care about in R1. + */ + if (ch & BRK_ABRT) + r1 |= BRK_ABRT; + + if (!(ch & Rx_CH_AV)) + return NO_POLL_CHAR; + + ch = readb(&channel->data); + ZSDELAY(); + + ch &= up->parity_mask; + return ch; +} + +static void sunzilog_put_poll_char(struct uart_port *port, + unsigned char ch) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *)port; + + sunzilog_putchar(&up->port, ch); +} +#endif /* CONFIG_CONSOLE_POLL */ + +static struct uart_ops sunzilog_pops = { + .tx_empty = sunzilog_tx_empty, + .set_mctrl = sunzilog_set_mctrl, + .get_mctrl = sunzilog_get_mctrl, + .stop_tx = sunzilog_stop_tx, + .start_tx = sunzilog_start_tx, + .stop_rx = sunzilog_stop_rx, + .enable_ms = sunzilog_enable_ms, + .break_ctl = sunzilog_break_ctl, + .startup = sunzilog_startup, + .shutdown = sunzilog_shutdown, + .set_termios = sunzilog_set_termios, + .type = sunzilog_type, + .release_port = sunzilog_release_port, + .request_port = sunzilog_request_port, + .config_port = sunzilog_config_port, + .verify_port = sunzilog_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = sunzilog_get_poll_char, + .poll_put_char = sunzilog_put_poll_char, +#endif +}; + +static int uart_chip_count; +static struct uart_sunzilog_port *sunzilog_port_table; +static struct zilog_layout __iomem **sunzilog_chip_regs; + +static struct uart_sunzilog_port *sunzilog_irq_chain; + +static struct uart_driver sunzilog_reg = { + .owner = THIS_MODULE, + .driver_name = "sunzilog", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + +static int __init sunzilog_alloc_tables(int num_sunzilog) +{ + struct uart_sunzilog_port *up; + unsigned long size; + int num_channels = num_sunzilog * 2; + int i; + + size = num_channels * sizeof(struct uart_sunzilog_port); + sunzilog_port_table = kzalloc(size, GFP_KERNEL); + if (!sunzilog_port_table) + return -ENOMEM; + + for (i = 0; i < num_channels; i++) { + up = &sunzilog_port_table[i]; + + spin_lock_init(&up->port.lock); + + if (i == 0) + sunzilog_irq_chain = up; + + if (i < num_channels - 1) + up->next = up + 1; + else + up->next = NULL; + } + + size = num_sunzilog * sizeof(struct zilog_layout __iomem *); + sunzilog_chip_regs = kzalloc(size, GFP_KERNEL); + if (!sunzilog_chip_regs) { + kfree(sunzilog_port_table); + sunzilog_irq_chain = NULL; + return -ENOMEM; + } + + return 0; +} + +static void sunzilog_free_tables(void) +{ + kfree(sunzilog_port_table); + sunzilog_irq_chain = NULL; + kfree(sunzilog_chip_regs); +} + +#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ + +static void sunzilog_putchar(struct uart_port *port, int ch) +{ + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + int loops = ZS_PUT_CHAR_MAX_DELAY; + + /* This is a timed polling loop so do not switch the explicit + * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM + */ + do { + unsigned char val = readb(&channel->control); + if (val & Tx_BUF_EMP) { + ZSDELAY(); + break; + } + udelay(5); + } while (--loops); + + writeb(ch, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); +} + +#ifdef CONFIG_SERIO + +static DEFINE_SPINLOCK(sunzilog_serio_lock); + +static int sunzilog_serio_write(struct serio *serio, unsigned char ch) +{ + struct uart_sunzilog_port *up = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&sunzilog_serio_lock, flags); + + sunzilog_putchar(&up->port, ch); + + spin_unlock_irqrestore(&sunzilog_serio_lock, flags); + + return 0; +} + +static int sunzilog_serio_open(struct serio *serio) +{ + struct uart_sunzilog_port *up = serio->port_data; + unsigned long flags; + int ret; + + spin_lock_irqsave(&sunzilog_serio_lock, flags); + if (!up->serio_open) { + up->serio_open = 1; + ret = 0; + } else + ret = -EBUSY; + spin_unlock_irqrestore(&sunzilog_serio_lock, flags); + + return ret; +} + +static void sunzilog_serio_close(struct serio *serio) +{ + struct uart_sunzilog_port *up = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&sunzilog_serio_lock, flags); + up->serio_open = 0; + spin_unlock_irqrestore(&sunzilog_serio_lock, flags); +} + +#endif /* CONFIG_SERIO */ + +#ifdef CONFIG_SERIAL_SUNZILOG_CONSOLE +static void +sunzilog_console_write(struct console *con, const char *s, unsigned int count) +{ + struct uart_sunzilog_port *up = &sunzilog_port_table[con->index]; + unsigned long flags; + int locked = 1; + + local_irq_save(flags); + if (up->port.sysrq) { + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&up->port.lock); + } else + spin_lock(&up->port.lock); + + uart_console_write(&up->port, s, count, sunzilog_putchar); + udelay(2); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); +} + +static int __init sunzilog_console_setup(struct console *con, char *options) +{ + struct uart_sunzilog_port *up = &sunzilog_port_table[con->index]; + unsigned long flags; + int baud, brg; + + if (up->port.type != PORT_SUNZILOG) + return -1; + + printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n", + (sunzilog_reg.minor - 64) + con->index, con->index); + + /* Get firmware console settings. */ + sunserial_console_termios(con, up->port.dev->of_node); + + /* Firmware console speed is limited to 150-->38400 baud so + * this hackish cflag thing is OK. + */ + switch (con->cflag & CBAUD) { + case B150: baud = 150; break; + case B300: baud = 300; break; + case B600: baud = 600; break; + case B1200: baud = 1200; break; + case B2400: baud = 2400; break; + case B4800: baud = 4800; break; + default: case B9600: baud = 9600; break; + case B19200: baud = 19200; break; + case B38400: baud = 38400; break; + }; + + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + + spin_lock_irqsave(&up->port.lock, flags); + + up->curregs[R15] |= BRKIE; + sunzilog_convert_to_zs(up, con->cflag, 0, brg); + + sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); + __sunzilog_startup(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +static struct console sunzilog_console_ops = { + .name = "ttyS", + .write = sunzilog_console_write, + .device = uart_console_device, + .setup = sunzilog_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunzilog_reg, +}; + +static inline struct console *SUNZILOG_CONSOLE(void) +{ + return &sunzilog_console_ops; +} + +#else +#define SUNZILOG_CONSOLE() (NULL) +#endif + +static void __devinit sunzilog_init_kbdms(struct uart_sunzilog_port *up) +{ + int baud, brg; + + if (up->flags & SUNZILOG_FLAG_CONS_KEYB) { + up->cflag = B1200 | CS8 | CLOCAL | CREAD; + baud = 1200; + } else { + up->cflag = B4800 | CS8 | CLOCAL | CREAD; + baud = 4800; + } + + up->curregs[R15] |= BRKIE; + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + sunzilog_convert_to_zs(up, up->cflag, 0, brg); + sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); + __sunzilog_startup(up); +} + +#ifdef CONFIG_SERIO +static void __devinit sunzilog_register_serio(struct uart_sunzilog_port *up) +{ + struct serio *serio = &up->serio; + + serio->port_data = up; + + serio->id.type = SERIO_RS232; + if (up->flags & SUNZILOG_FLAG_CONS_KEYB) { + serio->id.proto = SERIO_SUNKBD; + strlcpy(serio->name, "zskbd", sizeof(serio->name)); + } else { + serio->id.proto = SERIO_SUN; + serio->id.extra = 1; + strlcpy(serio->name, "zsms", sizeof(serio->name)); + } + strlcpy(serio->phys, + ((up->flags & SUNZILOG_FLAG_CONS_KEYB) ? + "zs/serio0" : "zs/serio1"), + sizeof(serio->phys)); + + serio->write = sunzilog_serio_write; + serio->open = sunzilog_serio_open; + serio->close = sunzilog_serio_close; + serio->dev.parent = up->port.dev; + + serio_register_port(serio); +} +#endif + +static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up) +{ + struct zilog_channel __iomem *channel; + unsigned long flags; + int baud, brg; + + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + + spin_lock_irqsave(&up->port.lock, flags); + if (ZS_IS_CHANNEL_A(up)) { + write_zsreg(channel, R9, FHWRES); + ZSDELAY_LONG(); + (void) read_zsreg(channel, R0); + } + + if (up->flags & (SUNZILOG_FLAG_CONS_KEYB | + SUNZILOG_FLAG_CONS_MOUSE)) { + up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + up->curregs[R4] = PAR_EVEN | X16CLK | SB1; + up->curregs[R3] = RxENAB | Rx8; + up->curregs[R5] = TxENAB | Tx8; + up->curregs[R6] = 0x00; /* SDLC Address */ + up->curregs[R7] = 0x7E; /* SDLC Flag */ + up->curregs[R9] = NV; + up->curregs[R7p] = 0x00; + sunzilog_init_kbdms(up); + /* Only enable interrupts if an ISR handler available */ + if (up->flags & SUNZILOG_FLAG_ISR_HANDLER) + up->curregs[R9] |= MIE; + write_zsreg(channel, R9, up->curregs[R9]); + } else { + /* Normal serial TTY. */ + up->parity_mask = 0xff; + up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + up->curregs[R4] = PAR_EVEN | X16CLK | SB1; + up->curregs[R3] = RxENAB | Rx8; + up->curregs[R5] = TxENAB | Tx8; + up->curregs[R6] = 0x00; /* SDLC Address */ + up->curregs[R7] = 0x7E; /* SDLC Flag */ + up->curregs[R9] = NV; + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + baud = 9600; + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + up->curregs[R12] = (brg & 0xff); + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRSRC | BRENAB; + up->curregs[R15] = FIFOEN; /* Use FIFO if on ESCC */ + up->curregs[R7p] = TxFIFO_LVL | RxFIFO_LVL; + if (__load_zsregs(channel, up->curregs)) { + up->flags |= SUNZILOG_FLAG_ESCC; + } + /* Only enable interrupts if an ISR handler available */ + if (up->flags & SUNZILOG_FLAG_ISR_HANDLER) + up->curregs[R9] |= MIE; + write_zsreg(channel, R9, up->curregs[R9]); + } + + spin_unlock_irqrestore(&up->port.lock, flags); + +#ifdef CONFIG_SERIO + if (up->flags & (SUNZILOG_FLAG_CONS_KEYB | + SUNZILOG_FLAG_CONS_MOUSE)) + sunzilog_register_serio(up); +#endif +} + +static int zilog_irq = -1; + +static int __devinit zs_probe(struct platform_device *op, const struct of_device_id *match) +{ + static int kbm_inst, uart_inst; + int inst; + struct uart_sunzilog_port *up; + struct zilog_layout __iomem *rp; + int keyboard_mouse = 0; + int err; + + if (of_find_property(op->dev.of_node, "keyboard", NULL)) + keyboard_mouse = 1; + + /* uarts must come before keyboards/mice */ + if (keyboard_mouse) + inst = uart_chip_count + kbm_inst; + else + inst = uart_inst; + + sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0, + sizeof(struct zilog_layout), + "zs"); + if (!sunzilog_chip_regs[inst]) + return -ENOMEM; + + rp = sunzilog_chip_regs[inst]; + + if (zilog_irq == -1) + zilog_irq = op->archdata.irqs[0]; + + up = &sunzilog_port_table[inst * 2]; + + /* Channel A */ + up[0].port.mapbase = op->resource[0].start + 0x00; + up[0].port.membase = (void __iomem *) &rp->channelA; + up[0].port.iotype = UPIO_MEM; + up[0].port.irq = op->archdata.irqs[0]; + up[0].port.uartclk = ZS_CLOCK; + up[0].port.fifosize = 1; + up[0].port.ops = &sunzilog_pops; + up[0].port.type = PORT_SUNZILOG; + up[0].port.flags = 0; + up[0].port.line = (inst * 2) + 0; + up[0].port.dev = &op->dev; + up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A; + if (keyboard_mouse) + up[0].flags |= SUNZILOG_FLAG_CONS_KEYB; + sunzilog_init_hw(&up[0]); + + /* Channel B */ + up[1].port.mapbase = op->resource[0].start + 0x04; + up[1].port.membase = (void __iomem *) &rp->channelB; + up[1].port.iotype = UPIO_MEM; + up[1].port.irq = op->archdata.irqs[0]; + up[1].port.uartclk = ZS_CLOCK; + up[1].port.fifosize = 1; + up[1].port.ops = &sunzilog_pops; + up[1].port.type = PORT_SUNZILOG; + up[1].port.flags = 0; + up[1].port.line = (inst * 2) + 1; + up[1].port.dev = &op->dev; + up[1].flags |= 0; + if (keyboard_mouse) + up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE; + sunzilog_init_hw(&up[1]); + + if (!keyboard_mouse) { + if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node, + &sunzilog_reg, up[0].port.line, + false)) + up->flags |= SUNZILOG_FLAG_IS_CONS; + err = uart_add_one_port(&sunzilog_reg, &up[0].port); + if (err) { + of_iounmap(&op->resource[0], + rp, sizeof(struct zilog_layout)); + return err; + } + if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node, + &sunzilog_reg, up[1].port.line, + false)) + up->flags |= SUNZILOG_FLAG_IS_CONS; + err = uart_add_one_port(&sunzilog_reg, &up[1].port); + if (err) { + uart_remove_one_port(&sunzilog_reg, &up[0].port); + of_iounmap(&op->resource[0], + rp, sizeof(struct zilog_layout)); + return err; + } + uart_inst++; + } else { + printk(KERN_INFO "%s: Keyboard at MMIO 0x%llx (irq = %d) " + "is a %s\n", + dev_name(&op->dev), + (unsigned long long) up[0].port.mapbase, + op->archdata.irqs[0], sunzilog_type(&up[0].port)); + printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) " + "is a %s\n", + dev_name(&op->dev), + (unsigned long long) up[1].port.mapbase, + op->archdata.irqs[0], sunzilog_type(&up[1].port)); + kbm_inst++; + } + + dev_set_drvdata(&op->dev, &up[0]); + + return 0; +} + +static void __devexit zs_remove_one(struct uart_sunzilog_port *up) +{ + if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) { +#ifdef CONFIG_SERIO + serio_unregister_port(&up->serio); +#endif + } else + uart_remove_one_port(&sunzilog_reg, &up->port); +} + +static int __devexit zs_remove(struct platform_device *op) +{ + struct uart_sunzilog_port *up = dev_get_drvdata(&op->dev); + struct zilog_layout __iomem *regs; + + zs_remove_one(&up[0]); + zs_remove_one(&up[1]); + + regs = sunzilog_chip_regs[up[0].port.line / 2]; + of_iounmap(&op->resource[0], regs, sizeof(struct zilog_layout)); + + dev_set_drvdata(&op->dev, NULL); + + return 0; +} + +static const struct of_device_id zs_match[] = { + { + .name = "zs", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, zs_match); + +static struct of_platform_driver zs_driver = { + .driver = { + .name = "zs", + .owner = THIS_MODULE, + .of_match_table = zs_match, + }, + .probe = zs_probe, + .remove = __devexit_p(zs_remove), +}; + +static int __init sunzilog_init(void) +{ + struct device_node *dp; + int err; + int num_keybms = 0; + int num_sunzilog = 0; + + for_each_node_by_name(dp, "zs") { + num_sunzilog++; + if (of_find_property(dp, "keyboard", NULL)) + num_keybms++; + } + + if (num_sunzilog) { + err = sunzilog_alloc_tables(num_sunzilog); + if (err) + goto out; + + uart_chip_count = num_sunzilog - num_keybms; + + err = sunserial_register_minors(&sunzilog_reg, + uart_chip_count * 2); + if (err) + goto out_free_tables; + } + + err = of_register_platform_driver(&zs_driver); + if (err) + goto out_unregister_uart; + + if (zilog_irq != -1) { + struct uart_sunzilog_port *up = sunzilog_irq_chain; + err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED, + "zs", sunzilog_irq_chain); + if (err) + goto out_unregister_driver; + + /* Enable Interrupts */ + while (up) { + struct zilog_channel __iomem *channel; + + /* printk (KERN_INFO "Enable IRQ for ZILOG Hardware %p\n", up); */ + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + up->flags |= SUNZILOG_FLAG_ISR_HANDLER; + up->curregs[R9] |= MIE; + write_zsreg(channel, R9, up->curregs[R9]); + up = up->next; + } + } + +out: + return err; + +out_unregister_driver: + of_unregister_platform_driver(&zs_driver); + +out_unregister_uart: + if (num_sunzilog) { + sunserial_unregister_minors(&sunzilog_reg, num_sunzilog); + sunzilog_reg.cons = NULL; + } + +out_free_tables: + sunzilog_free_tables(); + goto out; +} + +static void __exit sunzilog_exit(void) +{ + of_unregister_platform_driver(&zs_driver); + + if (zilog_irq != -1) { + struct uart_sunzilog_port *up = sunzilog_irq_chain; + + /* Disable Interrupts */ + while (up) { + struct zilog_channel __iomem *channel; + + /* printk (KERN_INFO "Disable IRQ for ZILOG Hardware %p\n", up); */ + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + up->flags &= ~SUNZILOG_FLAG_ISR_HANDLER; + up->curregs[R9] &= ~MIE; + write_zsreg(channel, R9, up->curregs[R9]); + up = up->next; + } + + free_irq(zilog_irq, sunzilog_irq_chain); + zilog_irq = -1; + } + + if (sunzilog_reg.nr) { + sunserial_unregister_minors(&sunzilog_reg, sunzilog_reg.nr); + sunzilog_free_tables(); + } +} + +module_init(sunzilog_init); +module_exit(sunzilog_exit); + +MODULE_AUTHOR("David S. Miller"); +MODULE_DESCRIPTION("Sun Zilog serial port driver"); +MODULE_VERSION("2.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/sunzilog.h b/drivers/tty/serial/sunzilog.h new file mode 100644 index 000000000000..5dec7b47cc38 --- /dev/null +++ b/drivers/tty/serial/sunzilog.h @@ -0,0 +1,289 @@ +#ifndef _SUNZILOG_H +#define _SUNZILOG_H + +struct zilog_channel { + volatile unsigned char control; + volatile unsigned char __pad1; + volatile unsigned char data; + volatile unsigned char __pad2; +}; + +struct zilog_layout { + struct zilog_channel channelB; + struct zilog_channel channelA; +}; + +#define NUM_ZSREGS 17 +#define R7p 16 /* Written as R7 with P15 bit 0 set */ + +/* Conversion routines to/from brg time constants from/to bits + * per second. + */ +#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) +#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) + +/* The Zilog register set */ + +#define FLAG 0x7e + +/* Write Register 0 */ +#define R0 0 /* Register selects */ +#define R1 1 +#define R2 2 +#define R3 3 +#define R4 4 +#define R5 5 +#define R6 6 +#define R7 7 +#define R8 8 +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 + +#define NULLCODE 0 /* Null Code */ +#define POINT_HIGH 0x8 /* Select upper half of registers */ +#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ +#define SEND_ABORT 0x18 /* HDLC Abort */ +#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ +#define RES_Tx_P 0x28 /* Reset TxINT Pending */ +#define ERR_RES 0x30 /* Error Reset */ +#define RES_H_IUS 0x38 /* Reset highest IUS */ + +#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ +#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ +#define RES_EOM_L 0xC0 /* Reset EOM latch */ + +/* Write Register 1 */ + +#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ +#define TxINT_ENAB 0x2 /* Tx Int Enable */ +#define PAR_SPEC 0x4 /* Parity is special condition */ + +#define RxINT_DISAB 0 /* Rx Int Disable */ +#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ +#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ +#define INT_ERR_Rx 0x18 /* Int on error only */ +#define RxINT_MASK 0x18 + +#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ +#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ +#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ + +/* Write Register #2 (Interrupt Vector) */ + +/* Write Register 3 */ + +#define RxENAB 0x1 /* Rx Enable */ +#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ +#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ +#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ +#define ENT_HM 0x10 /* Enter Hunt Mode */ +#define AUTO_ENAB 0x20 /* Auto Enables */ +#define Rx5 0x0 /* Rx 5 Bits/Character */ +#define Rx7 0x40 /* Rx 7 Bits/Character */ +#define Rx6 0x80 /* Rx 6 Bits/Character */ +#define Rx8 0xc0 /* Rx 8 Bits/Character */ +#define RxN_MASK 0xc0 + +/* Write Register 4 */ + +#define PAR_ENAB 0x1 /* Parity Enable */ +#define PAR_EVEN 0x2 /* Parity Even/Odd* */ + +#define SYNC_ENAB 0 /* Sync Modes Enable */ +#define SB1 0x4 /* 1 stop bit/char */ +#define SB15 0x8 /* 1.5 stop bits/char */ +#define SB2 0xc /* 2 stop bits/char */ + +#define MONSYNC 0 /* 8 Bit Sync character */ +#define BISYNC 0x10 /* 16 bit sync character */ +#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ +#define EXTSYNC 0x30 /* External Sync Mode */ + +#define X1CLK 0x0 /* x1 clock mode */ +#define X16CLK 0x40 /* x16 clock mode */ +#define X32CLK 0x80 /* x32 clock mode */ +#define X64CLK 0xC0 /* x64 clock mode */ +#define XCLK_MASK 0xC0 + +/* Write Register 5 */ + +#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ +#define RTS 0x2 /* RTS */ +#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ +#define TxENAB 0x8 /* Tx Enable */ +#define SND_BRK 0x10 /* Send Break */ +#define Tx5 0x0 /* Tx 5 bits (or less)/character */ +#define Tx7 0x20 /* Tx 7 bits/character */ +#define Tx6 0x40 /* Tx 6 bits/character */ +#define Tx8 0x60 /* Tx 8 bits/character */ +#define TxN_MASK 0x60 +#define DTR 0x80 /* DTR */ + +/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ + +/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ + +/* Write Register 7' (ESCC Only) */ +#define AUTO_TxFLAG 1 /* Automatic Tx SDLC Flag */ +#define AUTO_EOM_RST 2 /* Automatic EOM Reset */ +#define AUTOnRTS 4 /* Automatic /RTS pin deactivation */ +#define RxFIFO_LVL 8 /* Receive FIFO interrupt level */ +#define nDTRnREQ 0x10 /* /DTR/REQ timing */ +#define TxFIFO_LVL 0x20 /* Transmit FIFO interrupt level */ +#define EXT_RD_EN 0x40 /* Extended read register enable */ + +/* Write Register 8 (transmit buffer) */ + +/* Write Register 9 (Master interrupt control) */ +#define VIS 1 /* Vector Includes Status */ +#define NV 2 /* No Vector */ +#define DLC 4 /* Disable Lower Chain */ +#define MIE 8 /* Master Interrupt Enable */ +#define STATHI 0x10 /* Status high */ +#define SWIACK 0x20 /* Software Interrupt Ack (not on NMOS) */ +#define NORESET 0 /* No reset on write to R9 */ +#define CHRB 0x40 /* Reset channel B */ +#define CHRA 0x80 /* Reset channel A */ +#define FHWRES 0xc0 /* Force hardware reset */ + +/* Write Register 10 (misc control bits) */ +#define BIT6 1 /* 6 bit/8bit sync */ +#define LOOPMODE 2 /* SDLC Loop mode */ +#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ +#define MARKIDLE 8 /* Mark/flag on idle */ +#define GAOP 0x10 /* Go active on poll */ +#define NRZ 0 /* NRZ mode */ +#define NRZI 0x20 /* NRZI mode */ +#define FM1 0x40 /* FM1 (transition = 1) */ +#define FM0 0x60 /* FM0 (transition = 0) */ +#define CRCPS 0x80 /* CRC Preset I/O */ + +/* Write Register 11 (Clock Mode control) */ +#define TRxCXT 0 /* TRxC = Xtal output */ +#define TRxCTC 1 /* TRxC = Transmit clock */ +#define TRxCBR 2 /* TRxC = BR Generator Output */ +#define TRxCDP 3 /* TRxC = DPLL output */ +#define TRxCOI 4 /* TRxC O/I */ +#define TCRTxCP 0 /* Transmit clock = RTxC pin */ +#define TCTRxCP 8 /* Transmit clock = TRxC pin */ +#define TCBR 0x10 /* Transmit clock = BR Generator output */ +#define TCDPLL 0x18 /* Transmit clock = DPLL output */ +#define RCRTxCP 0 /* Receive clock = RTxC pin */ +#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ +#define RCBR 0x40 /* Receive clock = BR Generator output */ +#define RCDPLL 0x60 /* Receive clock = DPLL output */ +#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ + +/* Write Register 12 (lower byte of baud rate generator time constant) */ + +/* Write Register 13 (upper byte of baud rate generator time constant) */ + +/* Write Register 14 (Misc control bits) */ +#define BRENAB 1 /* Baud rate generator enable */ +#define BRSRC 2 /* Baud rate generator source */ +#define DTRREQ 4 /* DTR/Request function */ +#define AUTOECHO 8 /* Auto Echo */ +#define LOOPBAK 0x10 /* Local loopback */ +#define SEARCH 0x20 /* Enter search mode */ +#define RMC 0x40 /* Reset missing clock */ +#define DISDPLL 0x60 /* Disable DPLL */ +#define SSBR 0x80 /* Set DPLL source = BR generator */ +#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ +#define SFMM 0xc0 /* Set FM mode */ +#define SNRZI 0xe0 /* Set NRZI mode */ + +/* Write Register 15 (external/status interrupt control) */ +#define WR7pEN 1 /* WR7' Enable (ESCC only) */ +#define ZCIE 2 /* Zero count IE */ +#define FIFOEN 4 /* FIFO Enable (ESCC only) */ +#define DCDIE 8 /* DCD IE */ +#define SYNCIE 0x10 /* Sync/hunt IE */ +#define CTSIE 0x20 /* CTS IE */ +#define TxUIE 0x40 /* Tx Underrun/EOM IE */ +#define BRKIE 0x80 /* Break/Abort IE */ + + +/* Read Register 0 */ +#define Rx_CH_AV 0x1 /* Rx Character Available */ +#define ZCOUNT 0x2 /* Zero count */ +#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ +#define DCD 0x8 /* DCD */ +#define SYNC 0x10 /* Sync/hunt */ +#define CTS 0x20 /* CTS */ +#define TxEOM 0x40 /* Tx underrun */ +#define BRK_ABRT 0x80 /* Break/Abort */ + +/* Read Register 1 */ +#define ALL_SNT 0x1 /* All sent */ +/* Residue Data for 8 Rx bits/char programmed */ +#define RES3 0x8 /* 0/3 */ +#define RES4 0x4 /* 0/4 */ +#define RES5 0xc /* 0/5 */ +#define RES6 0x2 /* 0/6 */ +#define RES7 0xa /* 0/7 */ +#define RES8 0x6 /* 0/8 */ +#define RES18 0xe /* 1/8 */ +#define RES28 0x0 /* 2/8 */ +/* Special Rx Condition Interrupts */ +#define PAR_ERR 0x10 /* Parity error */ +#define Rx_OVR 0x20 /* Rx Overrun Error */ +#define CRC_ERR 0x40 /* CRC/Framing Error */ +#define END_FR 0x80 /* End of Frame (SDLC) */ + +/* Read Register 2 (channel b only) - Interrupt vector */ +#define CHB_Tx_EMPTY 0x00 +#define CHB_EXT_STAT 0x02 +#define CHB_Rx_AVAIL 0x04 +#define CHB_SPECIAL 0x06 +#define CHA_Tx_EMPTY 0x08 +#define CHA_EXT_STAT 0x0a +#define CHA_Rx_AVAIL 0x0c +#define CHA_SPECIAL 0x0e +#define STATUS_MASK 0x0e + +/* Read Register 3 (interrupt pending register) ch a only */ +#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ +#define CHBTxIP 0x2 /* Channel B Tx IP */ +#define CHBRxIP 0x4 /* Channel B Rx IP */ +#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ +#define CHATxIP 0x10 /* Channel A Tx IP */ +#define CHARxIP 0x20 /* Channel A Rx IP */ + +/* Read Register 6 (LSB frame byte count [Not on NMOS]) */ + +/* Read Register 7 (MSB frame byte count and FIFO status [Not on NMOS]) */ + +/* Read Register 8 (receive data register) */ + +/* Read Register 10 (misc status bits) */ +#define ONLOOP 2 /* On loop */ +#define LOOPSEND 0x10 /* Loop sending */ +#define CLK2MIS 0x40 /* Two clocks missing */ +#define CLK1MIS 0x80 /* One clock missing */ + +/* Read Register 12 (lower byte of baud rate generator constant) */ + +/* Read Register 13 (upper byte of baud rate generator constant) */ + +/* Read Register 15 (value of WR 15) */ + +/* Misc macros */ +#define ZS_CLEARERR(channel) do { sbus_writeb(ERR_RES, &channel->control); \ + udelay(5); } while(0) + +#define ZS_CLEARSTAT(channel) do { sbus_writeb(RES_EXT_INT, &channel->control); \ + udelay(5); } while(0) + +#define ZS_CLEARFIFO(channel) do { sbus_readb(&channel->data); \ + udelay(2); \ + sbus_readb(&channel->data); \ + udelay(2); \ + sbus_readb(&channel->data); \ + udelay(2); } while(0) + +#endif /* _SUNZILOG_H */ diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c new file mode 100644 index 000000000000..1f36b7eb7351 --- /dev/null +++ b/drivers/tty/serial/timbuart.c @@ -0,0 +1,531 @@ +/* + * timbuart.c timberdale FPGA UART driver + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * Timberdale FPGA UART + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "timbuart.h" + +struct timbuart_port { + struct uart_port port; + struct tasklet_struct tasklet; + int usedma; + u32 last_ier; + struct platform_device *dev; +}; + +static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800, + 921600, 1843200, 3250000}; + +static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier); + +static irqreturn_t timbuart_handleinterrupt(int irq, void *devid); + +static void timbuart_stop_rx(struct uart_port *port) +{ + /* spin lock held by upper layer, disable all RX interrupts */ + u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS; + iowrite32(ier, port->membase + TIMBUART_IER); +} + +static void timbuart_stop_tx(struct uart_port *port) +{ + /* spinlock held by upper layer, disable TX interrupt */ + u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE; + iowrite32(ier, port->membase + TIMBUART_IER); +} + +static void timbuart_start_tx(struct uart_port *port) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + + /* do not transfer anything here -> fire off the tasklet */ + tasklet_schedule(&uart->tasklet); +} + +static unsigned int timbuart_tx_empty(struct uart_port *port) +{ + u32 isr = ioread32(port->membase + TIMBUART_ISR); + + return (isr & TXBE) ? TIOCSER_TEMT : 0; +} + +static void timbuart_flush_buffer(struct uart_port *port) +{ + if (!timbuart_tx_empty(port)) { + u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | + TIMBUART_CTRL_FLSHTX; + + iowrite8(ctl, port->membase + TIMBUART_CTRL); + iowrite32(TXBF, port->membase + TIMBUART_ISR); + } +} + +static void timbuart_rx_chars(struct uart_port *port) +{ + struct tty_struct *tty = port->state->port.tty; + + while (ioread32(port->membase + TIMBUART_ISR) & RXDP) { + u8 ch = ioread8(port->membase + TIMBUART_RXFIFO); + port->icount.rx++; + tty_insert_flip_char(tty, ch, TTY_NORMAL); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(port->state->port.tty); + spin_lock(&port->lock); + + dev_dbg(port->dev, "%s - total read %d bytes\n", + __func__, port->icount.rx); +} + +static void timbuart_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) && + !uart_circ_empty(xmit)) { + iowrite8(xmit->buf[xmit->tail], + port->membase + TIMBUART_TXFIFO); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + dev_dbg(port->dev, + "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n", + __func__, + port->icount.tx, + ioread8(port->membase + TIMBUART_CTRL), + port->mctrl & TIOCM_RTS, + ioread8(port->membase + TIMBUART_BAUDRATE)); +} + +static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + struct circ_buf *xmit = &port->state->xmit; + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + if (port->x_char) + return; + + if (isr & TXFLAGS) { + timbuart_tx_chars(port); + /* clear all TX interrupts */ + iowrite32(TXFLAGS, port->membase + TIMBUART_ISR); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + } else + /* Re-enable any tx interrupt */ + *ier |= uart->last_ier & TXFLAGS; + + /* enable interrupts if there are chars in the transmit buffer, + * Or if we delivered some bytes and want the almost empty interrupt + * we wake up the upper layer later when we got the interrupt + * to give it some time to go out... + */ + if (!uart_circ_empty(xmit)) + *ier |= TXBAE; + + dev_dbg(port->dev, "%s - leaving\n", __func__); +} + +void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier) +{ + if (isr & RXFLAGS) { + /* Some RX status is set */ + if (isr & RXBF) { + u8 ctl = ioread8(port->membase + TIMBUART_CTRL) | + TIMBUART_CTRL_FLSHRX; + iowrite8(ctl, port->membase + TIMBUART_CTRL); + port->icount.overrun++; + } else if (isr & (RXDP)) + timbuart_rx_chars(port); + + /* ack all RX interrupts */ + iowrite32(RXFLAGS, port->membase + TIMBUART_ISR); + } + + /* always have the RX interrupts enabled */ + *ier |= RXBAF | RXBF | RXTT; + + dev_dbg(port->dev, "%s - leaving\n", __func__); +} + +void timbuart_tasklet(unsigned long arg) +{ + struct timbuart_port *uart = (struct timbuart_port *)arg; + u32 isr, ier = 0; + + spin_lock(&uart->port.lock); + + isr = ioread32(uart->port.membase + TIMBUART_ISR); + dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr); + + if (!uart->usedma) + timbuart_handle_tx_port(&uart->port, isr, &ier); + + timbuart_mctrl_check(&uart->port, isr, &ier); + + if (!uart->usedma) + timbuart_handle_rx_port(&uart->port, isr, &ier); + + iowrite32(ier, uart->port.membase + TIMBUART_IER); + + spin_unlock(&uart->port.lock); + dev_dbg(uart->port.dev, "%s leaving\n", __func__); +} + +static unsigned int timbuart_get_mctrl(struct uart_port *port) +{ + u8 cts = ioread8(port->membase + TIMBUART_CTRL); + dev_dbg(port->dev, "%s - cts %x\n", __func__, cts); + + if (cts & TIMBUART_CTRL_CTS) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + else + return TIOCM_DSR | TIOCM_CAR; +} + +static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + dev_dbg(port->dev, "%s - %x\n", __func__, mctrl); + + if (mctrl & TIOCM_RTS) + iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL); + else + iowrite8(0, port->membase + TIMBUART_CTRL); +} + +static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier) +{ + unsigned int cts; + + if (isr & CTS_DELTA) { + /* ack */ + iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR); + cts = timbuart_get_mctrl(port); + uart_handle_cts_change(port, cts & TIOCM_CTS); + wake_up_interruptible(&port->state->port.delta_msr_wait); + } + + *ier |= CTS_DELTA; +} + +static void timbuart_enable_ms(struct uart_port *port) +{ + /* N/A */ +} + +static void timbuart_break_ctl(struct uart_port *port, int ctl) +{ + /* N/A */ +} + +static int timbuart_startup(struct uart_port *port) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + + dev_dbg(port->dev, "%s\n", __func__); + + iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL); + iowrite32(0x1ff, port->membase + TIMBUART_ISR); + /* Enable all but TX interrupts */ + iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA, + port->membase + TIMBUART_IER); + + return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED, + "timb-uart", uart); +} + +static void timbuart_shutdown(struct uart_port *port) +{ + struct timbuart_port *uart = + container_of(port, struct timbuart_port, port); + dev_dbg(port->dev, "%s\n", __func__); + free_irq(port->irq, uart); + iowrite32(0, port->membase + TIMBUART_IER); +} + +static int get_bindex(int baud) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(baudrates); i++) + if (baud <= baudrates[i]) + return i; + + return -1; +} + +static void timbuart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int baud; + short bindex; + unsigned long flags; + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + bindex = get_bindex(baud); + dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex); + + if (bindex < 0) + bindex = 0; + baud = baudrates[bindex]; + + /* The serial layer calls into this once with old = NULL when setting + up initially */ + if (old) + tty_termios_copy_hw(termios, old); + tty_termios_encode_baud_rate(termios, baud, baud); + + spin_lock_irqsave(&port->lock, flags); + iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE); + uart_update_timeout(port, termios->c_cflag, baud); + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *timbuart_type(struct uart_port *port) +{ + return port->type == PORT_UNKNOWN ? "timbuart" : NULL; +} + +/* We do not request/release mappings of the registers here, + * currently it's done in the proble function. + */ +static void timbuart_release_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + int size = + resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); + + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, size); +} + +static int timbuart_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + int size = + resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0)); + + if (!request_mem_region(port->mapbase, size, "timb-uart")) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap(port->mapbase, size); + if (port->membase == NULL) { + release_mem_region(port->mapbase, size); + return -ENOMEM; + } + } + + return 0; +} + +static irqreturn_t timbuart_handleinterrupt(int irq, void *devid) +{ + struct timbuart_port *uart = (struct timbuart_port *)devid; + + if (ioread8(uart->port.membase + TIMBUART_IPR)) { + uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER); + + /* disable interrupts, the tasklet enables them again */ + iowrite32(0, uart->port.membase + TIMBUART_IER); + + /* fire off bottom half */ + tasklet_schedule(&uart->tasklet); + + return IRQ_HANDLED; + } else + return IRQ_NONE; +} + +/* + * Configure/autoconfigure the port. + */ +static void timbuart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_TIMBUART; + timbuart_request_port(port); + } +} + +static int timbuart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + +static struct uart_ops timbuart_ops = { + .tx_empty = timbuart_tx_empty, + .set_mctrl = timbuart_set_mctrl, + .get_mctrl = timbuart_get_mctrl, + .stop_tx = timbuart_stop_tx, + .start_tx = timbuart_start_tx, + .flush_buffer = timbuart_flush_buffer, + .stop_rx = timbuart_stop_rx, + .enable_ms = timbuart_enable_ms, + .break_ctl = timbuart_break_ctl, + .startup = timbuart_startup, + .shutdown = timbuart_shutdown, + .set_termios = timbuart_set_termios, + .type = timbuart_type, + .release_port = timbuart_release_port, + .request_port = timbuart_request_port, + .config_port = timbuart_config_port, + .verify_port = timbuart_verify_port +}; + +static struct uart_driver timbuart_driver = { + .owner = THIS_MODULE, + .driver_name = "timberdale_uart", + .dev_name = "ttyTU", + .major = TIMBUART_MAJOR, + .minor = TIMBUART_MINOR, + .nr = 1 +}; + +static int __devinit timbuart_probe(struct platform_device *dev) +{ + int err, irq; + struct timbuart_port *uart; + struct resource *iomem; + + dev_dbg(&dev->dev, "%s\n", __func__); + + uart = kzalloc(sizeof(*uart), GFP_KERNEL); + if (!uart) { + err = -EINVAL; + goto err_mem; + } + + uart->usedma = 0; + + uart->port.uartclk = 3250000 * 16; + uart->port.fifosize = TIMBUART_FIFO_SIZE; + uart->port.regshift = 2; + uart->port.iotype = UPIO_MEM; + uart->port.ops = &timbuart_ops; + uart->port.irq = 0; + uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; + uart->port.line = 0; + uart->port.dev = &dev->dev; + + iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!iomem) { + err = -ENOMEM; + goto err_register; + } + uart->port.mapbase = iomem->start; + uart->port.membase = NULL; + + irq = platform_get_irq(dev, 0); + if (irq < 0) { + err = -EINVAL; + goto err_register; + } + uart->port.irq = irq; + + tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart); + + err = uart_register_driver(&timbuart_driver); + if (err) + goto err_register; + + err = uart_add_one_port(&timbuart_driver, &uart->port); + if (err) + goto err_add_port; + + platform_set_drvdata(dev, uart); + + return 0; + +err_add_port: + uart_unregister_driver(&timbuart_driver); +err_register: + kfree(uart); +err_mem: + printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n", + err); + + return err; +} + +static int __devexit timbuart_remove(struct platform_device *dev) +{ + struct timbuart_port *uart = platform_get_drvdata(dev); + + tasklet_kill(&uart->tasklet); + uart_remove_one_port(&timbuart_driver, &uart->port); + uart_unregister_driver(&timbuart_driver); + kfree(uart); + + return 0; +} + +static struct platform_driver timbuart_platform_driver = { + .driver = { + .name = "timb-uart", + .owner = THIS_MODULE, + }, + .probe = timbuart_probe, + .remove = __devexit_p(timbuart_remove), +}; + +/*--------------------------------------------------------------------------*/ + +static int __init timbuart_init(void) +{ + return platform_driver_register(&timbuart_platform_driver); +} + +static void __exit timbuart_exit(void) +{ + platform_driver_unregister(&timbuart_platform_driver); +} + +module_init(timbuart_init); +module_exit(timbuart_exit); + +MODULE_DESCRIPTION("Timberdale UART driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:timb-uart"); + diff --git a/drivers/tty/serial/timbuart.h b/drivers/tty/serial/timbuart.h new file mode 100644 index 000000000000..7e566766bc43 --- /dev/null +++ b/drivers/tty/serial/timbuart.h @@ -0,0 +1,58 @@ +/* + * timbuart.c timberdale FPGA GPIO driver + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * Timberdale FPGA UART + */ + +#ifndef _TIMBUART_H +#define _TIMBUART_H + +#define TIMBUART_FIFO_SIZE 2048 + +#define TIMBUART_RXFIFO 0x08 +#define TIMBUART_TXFIFO 0x0c +#define TIMBUART_IER 0x10 +#define TIMBUART_IPR 0x14 +#define TIMBUART_ISR 0x18 +#define TIMBUART_CTRL 0x1c +#define TIMBUART_BAUDRATE 0x20 + +#define TIMBUART_CTRL_RTS 0x01 +#define TIMBUART_CTRL_CTS 0x02 +#define TIMBUART_CTRL_FLSHTX 0x40 +#define TIMBUART_CTRL_FLSHRX 0x80 + +#define TXBF 0x01 +#define TXBAE 0x02 +#define CTS_DELTA 0x04 +#define RXDP 0x08 +#define RXBAF 0x10 +#define RXBF 0x20 +#define RXTT 0x40 +#define RXBNAE 0x80 +#define TXBE 0x100 + +#define RXFLAGS (RXDP | RXBAF | RXBF | RXTT | RXBNAE) +#define TXFLAGS (TXBF | TXBAE) + +#define TIMBUART_MAJOR 204 +#define TIMBUART_MINOR 192 + +#endif /* _TIMBUART_H */ + diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c new file mode 100644 index 000000000000..d2fce865b731 --- /dev/null +++ b/drivers/tty/serial/uartlite.c @@ -0,0 +1,709 @@ +/* + * uartlite.c: Serial driver for Xilinx uartlite serial controller + * + * Copyright (C) 2006 Peter Korsgaard + * Copyright (C) 2007 Secret Lab Technologies Ltd. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)) +#include +#include +#include +#include + +/* Match table for of_platform binding */ +static struct of_device_id ulite_of_match[] __devinitdata = { + { .compatible = "xlnx,opb-uartlite-1.00.b", }, + { .compatible = "xlnx,xps-uartlite-1.00.a", }, + {} +}; +MODULE_DEVICE_TABLE(of, ulite_of_match); + +#endif + +#define ULITE_NAME "ttyUL" +#define ULITE_MAJOR 204 +#define ULITE_MINOR 187 +#define ULITE_NR_UARTS 4 + +/* --------------------------------------------------------------------- + * Register definitions + * + * For register details see datasheet: + * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf + */ + +#define ULITE_RX 0x00 +#define ULITE_TX 0x04 +#define ULITE_STATUS 0x08 +#define ULITE_CONTROL 0x0c + +#define ULITE_REGION 16 + +#define ULITE_STATUS_RXVALID 0x01 +#define ULITE_STATUS_RXFULL 0x02 +#define ULITE_STATUS_TXEMPTY 0x04 +#define ULITE_STATUS_TXFULL 0x08 +#define ULITE_STATUS_IE 0x10 +#define ULITE_STATUS_OVERRUN 0x20 +#define ULITE_STATUS_FRAME 0x40 +#define ULITE_STATUS_PARITY 0x80 + +#define ULITE_CONTROL_RST_TX 0x01 +#define ULITE_CONTROL_RST_RX 0x02 +#define ULITE_CONTROL_IE 0x10 + + +static struct uart_port ulite_ports[ULITE_NR_UARTS]; + +/* --------------------------------------------------------------------- + * Core UART driver operations + */ + +static int ulite_receive(struct uart_port *port, int stat) +{ + struct tty_struct *tty = port->state->port.tty; + unsigned char ch = 0; + char flag = TTY_NORMAL; + + if ((stat & (ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN + | ULITE_STATUS_FRAME)) == 0) + return 0; + + /* stats */ + if (stat & ULITE_STATUS_RXVALID) { + port->icount.rx++; + ch = ioread32be(port->membase + ULITE_RX); + + if (stat & ULITE_STATUS_PARITY) + port->icount.parity++; + } + + if (stat & ULITE_STATUS_OVERRUN) + port->icount.overrun++; + + if (stat & ULITE_STATUS_FRAME) + port->icount.frame++; + + + /* drop byte with parity error if IGNPAR specificed */ + if (stat & port->ignore_status_mask & ULITE_STATUS_PARITY) + stat &= ~ULITE_STATUS_RXVALID; + + stat &= port->read_status_mask; + + if (stat & ULITE_STATUS_PARITY) + flag = TTY_PARITY; + + + stat &= ~port->ignore_status_mask; + + if (stat & ULITE_STATUS_RXVALID) + tty_insert_flip_char(tty, ch, flag); + + if (stat & ULITE_STATUS_FRAME) + tty_insert_flip_char(tty, 0, TTY_FRAME); + + if (stat & ULITE_STATUS_OVERRUN) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + + return 1; +} + +static int ulite_transmit(struct uart_port *port, int stat) +{ + struct circ_buf *xmit = &port->state->xmit; + + if (stat & ULITE_STATUS_TXFULL) + return 0; + + if (port->x_char) { + iowrite32be(port->x_char, port->membase + ULITE_TX); + port->x_char = 0; + port->icount.tx++; + return 1; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return 0; + + iowrite32be(xmit->buf[xmit->tail], port->membase + ULITE_TX); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1); + port->icount.tx++; + + /* wake up */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + return 1; +} + +static irqreturn_t ulite_isr(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + int busy, n = 0; + + do { + int stat = ioread32be(port->membase + ULITE_STATUS); + busy = ulite_receive(port, stat); + busy |= ulite_transmit(port, stat); + n++; + } while (busy); + + /* work done? */ + if (n > 1) { + tty_flip_buffer_push(port->state->port.tty); + return IRQ_HANDLED; + } else { + return IRQ_NONE; + } +} + +static unsigned int ulite_tx_empty(struct uart_port *port) +{ + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&port->lock, flags); + ret = ioread32be(port->membase + ULITE_STATUS); + spin_unlock_irqrestore(&port->lock, flags); + + return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0; +} + +static unsigned int ulite_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void ulite_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* N/A */ +} + +static void ulite_stop_tx(struct uart_port *port) +{ + /* N/A */ +} + +static void ulite_start_tx(struct uart_port *port) +{ + ulite_transmit(port, ioread32be(port->membase + ULITE_STATUS)); +} + +static void ulite_stop_rx(struct uart_port *port) +{ + /* don't forward any more data (like !CREAD) */ + port->ignore_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY + | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; +} + +static void ulite_enable_ms(struct uart_port *port) +{ + /* N/A */ +} + +static void ulite_break_ctl(struct uart_port *port, int ctl) +{ + /* N/A */ +} + +static int ulite_startup(struct uart_port *port) +{ + int ret; + + ret = request_irq(port->irq, ulite_isr, + IRQF_SHARED | IRQF_SAMPLE_RANDOM, "uartlite", port); + if (ret) + return ret; + + iowrite32be(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX, + port->membase + ULITE_CONTROL); + iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL); + + return 0; +} + +static void ulite_shutdown(struct uart_port *port) +{ + iowrite32be(0, port->membase + ULITE_CONTROL); + ioread32be(port->membase + ULITE_CONTROL); /* dummy */ + free_irq(port->irq, port); +} + +static void ulite_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud; + + spin_lock_irqsave(&port->lock, flags); + + port->read_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN + | ULITE_STATUS_TXFULL; + + if (termios->c_iflag & INPCK) + port->read_status_mask |= + ULITE_STATUS_PARITY | ULITE_STATUS_FRAME; + + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= ULITE_STATUS_PARITY + | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; + + /* ignore all characters if CREAD is not set */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= + ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY + | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN; + + /* update timeout */ + baud = uart_get_baud_rate(port, termios, old, 0, 460800); + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *ulite_type(struct uart_port *port) +{ + return port->type == PORT_UARTLITE ? "uartlite" : NULL; +} + +static void ulite_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, ULITE_REGION); + iounmap(port->membase); + port->membase = NULL; +} + +static int ulite_request_port(struct uart_port *port) +{ + pr_debug("ulite console: port=%p; port->mapbase=%llx\n", + port, (unsigned long long) port->mapbase); + + if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) { + dev_err(port->dev, "Memory region busy\n"); + return -EBUSY; + } + + port->membase = ioremap(port->mapbase, ULITE_REGION); + if (!port->membase) { + dev_err(port->dev, "Unable to map registers\n"); + release_mem_region(port->mapbase, ULITE_REGION); + return -EBUSY; + } + + return 0; +} + +static void ulite_config_port(struct uart_port *port, int flags) +{ + if (!ulite_request_port(port)) + port->type = PORT_UARTLITE; +} + +static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + +#ifdef CONFIG_CONSOLE_POLL +static int ulite_get_poll_char(struct uart_port *port) +{ + if (!(ioread32be(port->membase + ULITE_STATUS) + & ULITE_STATUS_RXVALID)) + return NO_POLL_CHAR; + + return ioread32be(port->membase + ULITE_RX); +} + +static void ulite_put_poll_char(struct uart_port *port, unsigned char ch) +{ + while (ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_TXFULL) + cpu_relax(); + + /* write char to device */ + iowrite32be(ch, port->membase + ULITE_TX); +} +#endif + +static struct uart_ops ulite_ops = { + .tx_empty = ulite_tx_empty, + .set_mctrl = ulite_set_mctrl, + .get_mctrl = ulite_get_mctrl, + .stop_tx = ulite_stop_tx, + .start_tx = ulite_start_tx, + .stop_rx = ulite_stop_rx, + .enable_ms = ulite_enable_ms, + .break_ctl = ulite_break_ctl, + .startup = ulite_startup, + .shutdown = ulite_shutdown, + .set_termios = ulite_set_termios, + .type = ulite_type, + .release_port = ulite_release_port, + .request_port = ulite_request_port, + .config_port = ulite_config_port, + .verify_port = ulite_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = ulite_get_poll_char, + .poll_put_char = ulite_put_poll_char, +#endif +}; + +/* --------------------------------------------------------------------- + * Console driver operations + */ + +#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE +static void ulite_console_wait_tx(struct uart_port *port) +{ + int i; + u8 val; + + /* Spin waiting for TX fifo to have space available */ + for (i = 0; i < 100000; i++) { + val = ioread32be(port->membase + ULITE_STATUS); + if ((val & ULITE_STATUS_TXFULL) == 0) + break; + cpu_relax(); + } +} + +static void ulite_console_putchar(struct uart_port *port, int ch) +{ + ulite_console_wait_tx(port); + iowrite32be(ch, port->membase + ULITE_TX); +} + +static void ulite_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = &ulite_ports[co->index]; + unsigned long flags; + unsigned int ier; + int locked = 1; + + if (oops_in_progress) { + locked = spin_trylock_irqsave(&port->lock, flags); + } else + spin_lock_irqsave(&port->lock, flags); + + /* save and disable interrupt */ + ier = ioread32be(port->membase + ULITE_STATUS) & ULITE_STATUS_IE; + iowrite32be(0, port->membase + ULITE_CONTROL); + + uart_console_write(port, s, count, ulite_console_putchar); + + ulite_console_wait_tx(port); + + /* restore interrupt state */ + if (ier) + iowrite32be(ULITE_CONTROL_IE, port->membase + ULITE_CONTROL); + + if (locked) + spin_unlock_irqrestore(&port->lock, flags); +} + +static int __devinit ulite_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= ULITE_NR_UARTS) + return -EINVAL; + + port = &ulite_ports[co->index]; + + /* Has the device been initialized yet? */ + if (!port->mapbase) { + pr_debug("console on ttyUL%i not present\n", co->index); + return -ENODEV; + } + + /* not initialized yet? */ + if (!port->membase) { + if (ulite_request_port(port)) + return -ENODEV; + } + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver ulite_uart_driver; + +static struct console ulite_console = { + .name = ULITE_NAME, + .write = ulite_console_write, + .device = uart_console_device, + .setup = ulite_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, /* Specified on the cmdline (e.g. console=ttyUL0 ) */ + .data = &ulite_uart_driver, +}; + +static int __init ulite_console_init(void) +{ + register_console(&ulite_console); + return 0; +} + +console_initcall(ulite_console_init); + +#endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */ + +static struct uart_driver ulite_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "uartlite", + .dev_name = ULITE_NAME, + .major = ULITE_MAJOR, + .minor = ULITE_MINOR, + .nr = ULITE_NR_UARTS, +#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE + .cons = &ulite_console, +#endif +}; + +/* --------------------------------------------------------------------- + * Port assignment functions (mapping devices to uart_port structures) + */ + +/** ulite_assign: register a uartlite device with the driver + * + * @dev: pointer to device structure + * @id: requested id number. Pass -1 for automatic port assignment + * @base: base address of uartlite registers + * @irq: irq number for uartlite + * + * Returns: 0 on success, <0 otherwise + */ +static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq) +{ + struct uart_port *port; + int rc; + + /* if id = -1; then scan for a free id and use that */ + if (id < 0) { + for (id = 0; id < ULITE_NR_UARTS; id++) + if (ulite_ports[id].mapbase == 0) + break; + } + if (id < 0 || id >= ULITE_NR_UARTS) { + dev_err(dev, "%s%i too large\n", ULITE_NAME, id); + return -EINVAL; + } + + if ((ulite_ports[id].mapbase) && (ulite_ports[id].mapbase != base)) { + dev_err(dev, "cannot assign to %s%i; it is already in use\n", + ULITE_NAME, id); + return -EBUSY; + } + + port = &ulite_ports[id]; + + spin_lock_init(&port->lock); + port->fifosize = 16; + port->regshift = 2; + port->iotype = UPIO_MEM; + port->iobase = 1; /* mark port in use */ + port->mapbase = base; + port->membase = NULL; + port->ops = &ulite_ops; + port->irq = irq; + port->flags = UPF_BOOT_AUTOCONF; + port->dev = dev; + port->type = PORT_UNKNOWN; + port->line = id; + + dev_set_drvdata(dev, port); + + /* Register the port */ + rc = uart_add_one_port(&ulite_uart_driver, port); + if (rc) { + dev_err(dev, "uart_add_one_port() failed; err=%i\n", rc); + port->mapbase = 0; + dev_set_drvdata(dev, NULL); + return rc; + } + + return 0; +} + +/** ulite_release: register a uartlite device with the driver + * + * @dev: pointer to device structure + */ +static int __devexit ulite_release(struct device *dev) +{ + struct uart_port *port = dev_get_drvdata(dev); + int rc = 0; + + if (port) { + rc = uart_remove_one_port(&ulite_uart_driver, port); + dev_set_drvdata(dev, NULL); + port->mapbase = 0; + } + + return rc; +} + +/* --------------------------------------------------------------------- + * Platform bus binding + */ + +static int __devinit ulite_probe(struct platform_device *pdev) +{ + struct resource *res, *res2; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res2) + return -ENODEV; + + return ulite_assign(&pdev->dev, pdev->id, res->start, res2->start); +} + +static int __devexit ulite_remove(struct platform_device *pdev) +{ + return ulite_release(&pdev->dev); +} + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:uartlite"); + +static struct platform_driver ulite_platform_driver = { + .probe = ulite_probe, + .remove = __devexit_p(ulite_remove), + .driver = { + .owner = THIS_MODULE, + .name = "uartlite", + }, +}; + +/* --------------------------------------------------------------------- + * OF bus bindings + */ +#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE)) +static int __devinit +ulite_of_probe(struct platform_device *op, const struct of_device_id *match) +{ + struct resource res; + const unsigned int *id; + int irq, rc; + + dev_dbg(&op->dev, "%s(%p, %p)\n", __func__, op, match); + + rc = of_address_to_resource(op->dev.of_node, 0, &res); + if (rc) { + dev_err(&op->dev, "invalid address\n"); + return rc; + } + + irq = irq_of_parse_and_map(op->dev.of_node, 0); + + id = of_get_property(op->dev.of_node, "port-number", NULL); + + return ulite_assign(&op->dev, id ? *id : -1, res.start, irq); +} + +static int __devexit ulite_of_remove(struct platform_device *op) +{ + return ulite_release(&op->dev); +} + +static struct of_platform_driver ulite_of_driver = { + .probe = ulite_of_probe, + .remove = __devexit_p(ulite_of_remove), + .driver = { + .name = "uartlite", + .owner = THIS_MODULE, + .of_match_table = ulite_of_match, + }, +}; + +/* Registration helpers to keep the number of #ifdefs to a minimum */ +static inline int __init ulite_of_register(void) +{ + pr_debug("uartlite: calling of_register_platform_driver()\n"); + return of_register_platform_driver(&ulite_of_driver); +} + +static inline void __exit ulite_of_unregister(void) +{ + of_unregister_platform_driver(&ulite_of_driver); +} +#else /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */ +/* Appropriate config not enabled; do nothing helpers */ +static inline int __init ulite_of_register(void) { return 0; } +static inline void __exit ulite_of_unregister(void) { } +#endif /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */ + +/* --------------------------------------------------------------------- + * Module setup/teardown + */ + +int __init ulite_init(void) +{ + int ret; + + pr_debug("uartlite: calling uart_register_driver()\n"); + ret = uart_register_driver(&ulite_uart_driver); + if (ret) + goto err_uart; + + ret = ulite_of_register(); + if (ret) + goto err_of; + + pr_debug("uartlite: calling platform_driver_register()\n"); + ret = platform_driver_register(&ulite_platform_driver); + if (ret) + goto err_plat; + + return 0; + +err_plat: + ulite_of_unregister(); +err_of: + uart_unregister_driver(&ulite_uart_driver); +err_uart: + printk(KERN_ERR "registering uartlite driver failed: err=%i", ret); + return ret; +} + +void __exit ulite_exit(void) +{ + platform_driver_unregister(&ulite_platform_driver); + ulite_of_unregister(); + uart_unregister_driver(&ulite_uart_driver); +} + +module_init(ulite_init); +module_exit(ulite_exit); + +MODULE_AUTHOR("Peter Korsgaard "); +MODULE_DESCRIPTION("Xilinx uartlite serial driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c new file mode 100644 index 000000000000..3f4848e2174a --- /dev/null +++ b/drivers/tty/serial/ucc_uart.c @@ -0,0 +1,1537 @@ +/* + * Freescale QUICC Engine UART device driver + * + * Author: Timur Tabi + * + * Copyright 2007 Freescale Semiconductor, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * This driver adds support for UART devices via Freescale's QUICC Engine + * found on some Freescale SOCs. + * + * If Soft-UART support is needed but not already present, then this driver + * will request and upload the "Soft-UART" microcode upon probe. The + * filename of the microcode should be fsl_qe_ucode_uart_X_YZ.bin, where "X" + * is the name of the SOC (e.g. 8323), and YZ is the revision of the SOC, + * (e.g. "11" for 1.1). + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +/* + * The GUMR flag for Soft UART. This would normally be defined in qe.h, + * but Soft-UART is a hack and we want to keep everything related to it in + * this file. + */ +#define UCC_SLOW_GUMR_H_SUART 0x00004000 /* Soft-UART */ + +/* + * soft_uart is 1 if we need to use Soft-UART mode + */ +static int soft_uart; +/* + * firmware_loaded is 1 if the firmware has been loaded, 0 otherwise. + */ +static int firmware_loaded; + +/* Enable this macro to configure all serial ports in internal loopback + mode */ +/* #define LOOPBACK */ + +/* The major and minor device numbers are defined in + * http://www.lanana.org/docs/device-list/devices-2.6+.txt. For the QE + * UART, we have major number 204 and minor numbers 46 - 49, which are the + * same as for the CPM2. This decision was made because no Freescale part + * has both a CPM and a QE. + */ +#define SERIAL_QE_MAJOR 204 +#define SERIAL_QE_MINOR 46 + +/* Since we only have minor numbers 46 - 49, there is a hard limit of 4 ports */ +#define UCC_MAX_UART 4 + +/* The number of buffer descriptors for receiving characters. */ +#define RX_NUM_FIFO 4 + +/* The number of buffer descriptors for transmitting characters. */ +#define TX_NUM_FIFO 4 + +/* The maximum size of the character buffer for a single RX BD. */ +#define RX_BUF_SIZE 32 + +/* The maximum size of the character buffer for a single TX BD. */ +#define TX_BUF_SIZE 32 + +/* + * The number of jiffies to wait after receiving a close command before the + * device is actually closed. This allows the last few characters to be + * sent over the wire. + */ +#define UCC_WAIT_CLOSING 100 + +struct ucc_uart_pram { + struct ucc_slow_pram common; + u8 res1[8]; /* reserved */ + __be16 maxidl; /* Maximum idle chars */ + __be16 idlc; /* temp idle counter */ + __be16 brkcr; /* Break count register */ + __be16 parec; /* receive parity error counter */ + __be16 frmec; /* receive framing error counter */ + __be16 nosec; /* receive noise counter */ + __be16 brkec; /* receive break condition counter */ + __be16 brkln; /* last received break length */ + __be16 uaddr[2]; /* UART address character 1 & 2 */ + __be16 rtemp; /* Temp storage */ + __be16 toseq; /* Transmit out of sequence char */ + __be16 cchars[8]; /* control characters 1-8 */ + __be16 rccm; /* receive control character mask */ + __be16 rccr; /* receive control character register */ + __be16 rlbc; /* receive last break character */ + __be16 res2; /* reserved */ + __be32 res3; /* reserved, should be cleared */ + u8 res4; /* reserved, should be cleared */ + u8 res5[3]; /* reserved, should be cleared */ + __be32 res6; /* reserved, should be cleared */ + __be32 res7; /* reserved, should be cleared */ + __be32 res8; /* reserved, should be cleared */ + __be32 res9; /* reserved, should be cleared */ + __be32 res10; /* reserved, should be cleared */ + __be32 res11; /* reserved, should be cleared */ + __be32 res12; /* reserved, should be cleared */ + __be32 res13; /* reserved, should be cleared */ +/* The rest is for Soft-UART only */ + __be16 supsmr; /* 0x90, Shadow UPSMR */ + __be16 res92; /* 0x92, reserved, initialize to 0 */ + __be32 rx_state; /* 0x94, RX state, initialize to 0 */ + __be32 rx_cnt; /* 0x98, RX count, initialize to 0 */ + u8 rx_length; /* 0x9C, Char length, set to 1+CL+PEN+1+SL */ + u8 rx_bitmark; /* 0x9D, reserved, initialize to 0 */ + u8 rx_temp_dlst_qe; /* 0x9E, reserved, initialize to 0 */ + u8 res14[0xBC - 0x9F]; /* reserved */ + __be32 dump_ptr; /* 0xBC, Dump pointer */ + __be32 rx_frame_rem; /* 0xC0, reserved, initialize to 0 */ + u8 rx_frame_rem_size; /* 0xC4, reserved, initialize to 0 */ + u8 tx_mode; /* 0xC5, mode, 0=AHDLC, 1=UART */ + __be16 tx_state; /* 0xC6, TX state */ + u8 res15[0xD0 - 0xC8]; /* reserved */ + __be32 resD0; /* 0xD0, reserved, initialize to 0 */ + u8 resD4; /* 0xD4, reserved, initialize to 0 */ + __be16 resD5; /* 0xD5, reserved, initialize to 0 */ +} __attribute__ ((packed)); + +/* SUPSMR definitions, for Soft-UART only */ +#define UCC_UART_SUPSMR_SL 0x8000 +#define UCC_UART_SUPSMR_RPM_MASK 0x6000 +#define UCC_UART_SUPSMR_RPM_ODD 0x0000 +#define UCC_UART_SUPSMR_RPM_LOW 0x2000 +#define UCC_UART_SUPSMR_RPM_EVEN 0x4000 +#define UCC_UART_SUPSMR_RPM_HIGH 0x6000 +#define UCC_UART_SUPSMR_PEN 0x1000 +#define UCC_UART_SUPSMR_TPM_MASK 0x0C00 +#define UCC_UART_SUPSMR_TPM_ODD 0x0000 +#define UCC_UART_SUPSMR_TPM_LOW 0x0400 +#define UCC_UART_SUPSMR_TPM_EVEN 0x0800 +#define UCC_UART_SUPSMR_TPM_HIGH 0x0C00 +#define UCC_UART_SUPSMR_FRZ 0x0100 +#define UCC_UART_SUPSMR_UM_MASK 0x00c0 +#define UCC_UART_SUPSMR_UM_NORMAL 0x0000 +#define UCC_UART_SUPSMR_UM_MAN_MULTI 0x0040 +#define UCC_UART_SUPSMR_UM_AUTO_MULTI 0x00c0 +#define UCC_UART_SUPSMR_CL_MASK 0x0030 +#define UCC_UART_SUPSMR_CL_8 0x0030 +#define UCC_UART_SUPSMR_CL_7 0x0020 +#define UCC_UART_SUPSMR_CL_6 0x0010 +#define UCC_UART_SUPSMR_CL_5 0x0000 + +#define UCC_UART_TX_STATE_AHDLC 0x00 +#define UCC_UART_TX_STATE_UART 0x01 +#define UCC_UART_TX_STATE_X1 0x00 +#define UCC_UART_TX_STATE_X16 0x80 + +#define UCC_UART_PRAM_ALIGNMENT 0x100 + +#define UCC_UART_SIZE_OF_BD UCC_SLOW_SIZE_OF_BD +#define NUM_CONTROL_CHARS 8 + +/* Private per-port data structure */ +struct uart_qe_port { + struct uart_port port; + struct ucc_slow __iomem *uccp; + struct ucc_uart_pram __iomem *uccup; + struct ucc_slow_info us_info; + struct ucc_slow_private *us_private; + struct device_node *np; + unsigned int ucc_num; /* First ucc is 0, not 1 */ + + u16 rx_nrfifos; + u16 rx_fifosize; + u16 tx_nrfifos; + u16 tx_fifosize; + int wait_closing; + u32 flags; + struct qe_bd *rx_bd_base; + struct qe_bd *rx_cur; + struct qe_bd *tx_bd_base; + struct qe_bd *tx_cur; + unsigned char *tx_buf; + unsigned char *rx_buf; + void *bd_virt; /* virtual address of the BD buffers */ + dma_addr_t bd_dma_addr; /* bus address of the BD buffers */ + unsigned int bd_size; /* size of BD buffer space */ +}; + +static struct uart_driver ucc_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "ucc_uart", + .dev_name = "ttyQE", + .major = SERIAL_QE_MAJOR, + .minor = SERIAL_QE_MINOR, + .nr = UCC_MAX_UART, +}; + +/* + * Virtual to physical address translation. + * + * Given the virtual address for a character buffer, this function returns + * the physical (DMA) equivalent. + */ +static inline dma_addr_t cpu2qe_addr(void *addr, struct uart_qe_port *qe_port) +{ + if (likely((addr >= qe_port->bd_virt)) && + (addr < (qe_port->bd_virt + qe_port->bd_size))) + return qe_port->bd_dma_addr + (addr - qe_port->bd_virt); + + /* something nasty happened */ + printk(KERN_ERR "%s: addr=%p\n", __func__, addr); + BUG(); + return 0; +} + +/* + * Physical to virtual address translation. + * + * Given the physical (DMA) address for a character buffer, this function + * returns the virtual equivalent. + */ +static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port) +{ + /* sanity check */ + if (likely((addr >= qe_port->bd_dma_addr) && + (addr < (qe_port->bd_dma_addr + qe_port->bd_size)))) + return qe_port->bd_virt + (addr - qe_port->bd_dma_addr); + + /* something nasty happened */ + printk(KERN_ERR "%s: addr=%x\n", __func__, addr); + BUG(); + return NULL; +} + +/* + * Return 1 if the QE is done transmitting all buffers for this port + * + * This function scans each BD in sequence. If we find a BD that is not + * ready (READY=1), then we return 0 indicating that the QE is still sending + * data. If we reach the last BD (WRAP=1), then we know we've scanned + * the entire list, and all BDs are done. + */ +static unsigned int qe_uart_tx_empty(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct qe_bd *bdp = qe_port->tx_bd_base; + + while (1) { + if (in_be16(&bdp->status) & BD_SC_READY) + /* This BD is not done, so return "not done" */ + return 0; + + if (in_be16(&bdp->status) & BD_SC_WRAP) + /* + * This BD is done and it's the last one, so return + * "done" + */ + return 1; + + bdp++; + }; +} + +/* + * Set the modem control lines + * + * Although the QE can control the modem control lines (e.g. CTS), we + * don't need that support. This function must exist, however, otherwise + * the kernel will panic. + */ +void qe_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +/* + * Get the current modem control line status + * + * Although the QE can control the modem control lines (e.g. CTS), this + * driver currently doesn't support that, so we always return Carrier + * Detect, Data Set Ready, and Clear To Send. + */ +static unsigned int qe_uart_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +/* + * Disable the transmit interrupt. + * + * Although this function is called "stop_tx", it does not actually stop + * transmission of data. Instead, it tells the QE to not generate an + * interrupt when the UCC is finished sending characters. + */ +static void qe_uart_stop_tx(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + + clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX); +} + +/* + * Transmit as many characters to the HW as possible. + * + * This function will attempt to stuff of all the characters from the + * kernel's transmit buffer into TX BDs. + * + * A return value of non-zero indicates that it successfully stuffed all + * characters from the kernel buffer. + * + * A return value of zero indicates that there are still characters in the + * kernel's buffer that have not been transmitted, but there are no more BDs + * available. This function should be called again after a BD has been made + * available. + */ +static int qe_uart_tx_pump(struct uart_qe_port *qe_port) +{ + struct qe_bd *bdp; + unsigned char *p; + unsigned int count; + struct uart_port *port = &qe_port->port; + struct circ_buf *xmit = &port->state->xmit; + + bdp = qe_port->rx_cur; + + /* Handle xon/xoff */ + if (port->x_char) { + /* Pick next descriptor and fill from buffer */ + bdp = qe_port->tx_cur; + + p = qe2cpu_addr(bdp->buf, qe_port); + + *p++ = port->x_char; + out_be16(&bdp->length, 1); + setbits16(&bdp->status, BD_SC_READY); + /* Get next BD. */ + if (in_be16(&bdp->status) & BD_SC_WRAP) + bdp = qe_port->tx_bd_base; + else + bdp++; + qe_port->tx_cur = bdp; + + port->icount.tx++; + port->x_char = 0; + return 1; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + qe_uart_stop_tx(port); + return 0; + } + + /* Pick next descriptor and fill from buffer */ + bdp = qe_port->tx_cur; + + while (!(in_be16(&bdp->status) & BD_SC_READY) && + (xmit->tail != xmit->head)) { + count = 0; + p = qe2cpu_addr(bdp->buf, qe_port); + while (count < qe_port->tx_fifosize) { + *p++ = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + count++; + if (xmit->head == xmit->tail) + break; + } + + out_be16(&bdp->length, count); + setbits16(&bdp->status, BD_SC_READY); + + /* Get next BD. */ + if (in_be16(&bdp->status) & BD_SC_WRAP) + bdp = qe_port->tx_bd_base; + else + bdp++; + } + qe_port->tx_cur = bdp; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) { + /* The kernel buffer is empty, so turn off TX interrupts. We + don't need to be told when the QE is finished transmitting + the data. */ + qe_uart_stop_tx(port); + return 0; + } + + return 1; +} + +/* + * Start transmitting data + * + * This function will start transmitting any available data, if the port + * isn't already transmitting data. + */ +static void qe_uart_start_tx(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + + /* If we currently are transmitting, then just return */ + if (in_be16(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX) + return; + + /* Otherwise, pump the port and start transmission */ + if (qe_uart_tx_pump(qe_port)) + setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX); +} + +/* + * Stop transmitting data + */ +static void qe_uart_stop_rx(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + + clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX); +} + +/* + * Enable status change interrupts + * + * We don't support status change interrupts, but we need to define this + * function otherwise the kernel will panic. + */ +static void qe_uart_enable_ms(struct uart_port *port) +{ +} + +/* Start or stop sending break signal + * + * This function controls the sending of a break signal. If break_state=1, + * then we start sending a break signal. If break_state=0, then we stop + * sending the break signal. + */ +static void qe_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + + if (break_state) + ucc_slow_stop_tx(qe_port->us_private); + else + ucc_slow_restart_tx(qe_port->us_private); +} + +/* ISR helper function for receiving character. + * + * This function is called by the ISR to handling receiving characters + */ +static void qe_uart_int_rx(struct uart_qe_port *qe_port) +{ + int i; + unsigned char ch, *cp; + struct uart_port *port = &qe_port->port; + struct tty_struct *tty = port->state->port.tty; + struct qe_bd *bdp; + u16 status; + unsigned int flg; + + /* Just loop through the closed BDs and copy the characters into + * the buffer. + */ + bdp = qe_port->rx_cur; + while (1) { + status = in_be16(&bdp->status); + + /* If this one is empty, then we assume we've read them all */ + if (status & BD_SC_EMPTY) + break; + + /* get number of characters, and check space in RX buffer */ + i = in_be16(&bdp->length); + + /* If we don't have enough room in RX buffer for the entire BD, + * then we try later, which will be the next RX interrupt. + */ + if (tty_buffer_request_room(tty, i) < i) { + dev_dbg(port->dev, "ucc-uart: no room in RX buffer\n"); + return; + } + + /* get pointer */ + cp = qe2cpu_addr(bdp->buf, qe_port); + + /* loop through the buffer */ + while (i-- > 0) { + ch = *cp++; + port->icount.rx++; + flg = TTY_NORMAL; + + if (!i && status & + (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV)) + goto handle_error; + if (uart_handle_sysrq_char(port, ch)) + continue; + +error_return: + tty_insert_flip_char(tty, ch, flg); + + } + + /* This BD is ready to be used again. Clear status. get next */ + clrsetbits_be16(&bdp->status, BD_SC_BR | BD_SC_FR | BD_SC_PR | + BD_SC_OV | BD_SC_ID, BD_SC_EMPTY); + if (in_be16(&bdp->status) & BD_SC_WRAP) + bdp = qe_port->rx_bd_base; + else + bdp++; + + } + + /* Write back buffer pointer */ + qe_port->rx_cur = bdp; + + /* Activate BH processing */ + tty_flip_buffer_push(tty); + + return; + + /* Error processing */ + +handle_error: + /* Statistics */ + if (status & BD_SC_BR) + port->icount.brk++; + if (status & BD_SC_PR) + port->icount.parity++; + if (status & BD_SC_FR) + port->icount.frame++; + if (status & BD_SC_OV) + port->icount.overrun++; + + /* Mask out ignored conditions */ + status &= port->read_status_mask; + + /* Handle the remaining ones */ + if (status & BD_SC_BR) + flg = TTY_BREAK; + else if (status & BD_SC_PR) + flg = TTY_PARITY; + else if (status & BD_SC_FR) + flg = TTY_FRAME; + + /* Overrun does not affect the current character ! */ + if (status & BD_SC_OV) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); +#ifdef SUPPORT_SYSRQ + port->sysrq = 0; +#endif + goto error_return; +} + +/* Interrupt handler + * + * This interrupt handler is called after a BD is processed. + */ +static irqreturn_t qe_uart_int(int irq, void *data) +{ + struct uart_qe_port *qe_port = (struct uart_qe_port *) data; + struct ucc_slow __iomem *uccp = qe_port->uccp; + u16 events; + + /* Clear the interrupts */ + events = in_be16(&uccp->ucce); + out_be16(&uccp->ucce, events); + + if (events & UCC_UART_UCCE_BRKE) + uart_handle_break(&qe_port->port); + + if (events & UCC_UART_UCCE_RX) + qe_uart_int_rx(qe_port); + + if (events & UCC_UART_UCCE_TX) + qe_uart_tx_pump(qe_port); + + return events ? IRQ_HANDLED : IRQ_NONE; +} + +/* Initialize buffer descriptors + * + * This function initializes all of the RX and TX buffer descriptors. + */ +static void qe_uart_initbd(struct uart_qe_port *qe_port) +{ + int i; + void *bd_virt; + struct qe_bd *bdp; + + /* Set the physical address of the host memory buffers in the buffer + * descriptors, and the virtual address for us to work with. + */ + bd_virt = qe_port->bd_virt; + bdp = qe_port->rx_bd_base; + qe_port->rx_cur = qe_port->rx_bd_base; + for (i = 0; i < (qe_port->rx_nrfifos - 1); i++) { + out_be16(&bdp->status, BD_SC_EMPTY | BD_SC_INTRPT); + out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); + out_be16(&bdp->length, 0); + bd_virt += qe_port->rx_fifosize; + bdp++; + } + + /* */ + out_be16(&bdp->status, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT); + out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); + out_be16(&bdp->length, 0); + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + bd_virt = qe_port->bd_virt + + L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize); + qe_port->tx_cur = qe_port->tx_bd_base; + bdp = qe_port->tx_bd_base; + for (i = 0; i < (qe_port->tx_nrfifos - 1); i++) { + out_be16(&bdp->status, BD_SC_INTRPT); + out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); + out_be16(&bdp->length, 0); + bd_virt += qe_port->tx_fifosize; + bdp++; + } + + /* Loopback requires the preamble bit to be set on the first TX BD */ +#ifdef LOOPBACK + setbits16(&qe_port->tx_cur->status, BD_SC_P); +#endif + + out_be16(&bdp->status, BD_SC_WRAP | BD_SC_INTRPT); + out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port)); + out_be16(&bdp->length, 0); +} + +/* + * Initialize a UCC for UART. + * + * This function configures a given UCC to be used as a UART device. Basic + * UCC initialization is handled in qe_uart_request_port(). This function + * does all the UART-specific stuff. + */ +static void qe_uart_init_ucc(struct uart_qe_port *qe_port) +{ + u32 cecr_subblock; + struct ucc_slow __iomem *uccp = qe_port->uccp; + struct ucc_uart_pram *uccup = qe_port->uccup; + + unsigned int i; + + /* First, disable TX and RX in the UCC */ + ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX); + + /* Program the UCC UART parameter RAM */ + out_8(&uccup->common.rbmr, UCC_BMR_GBL | UCC_BMR_BO_BE); + out_8(&uccup->common.tbmr, UCC_BMR_GBL | UCC_BMR_BO_BE); + out_be16(&uccup->common.mrblr, qe_port->rx_fifosize); + out_be16(&uccup->maxidl, 0x10); + out_be16(&uccup->brkcr, 1); + out_be16(&uccup->parec, 0); + out_be16(&uccup->frmec, 0); + out_be16(&uccup->nosec, 0); + out_be16(&uccup->brkec, 0); + out_be16(&uccup->uaddr[0], 0); + out_be16(&uccup->uaddr[1], 0); + out_be16(&uccup->toseq, 0); + for (i = 0; i < 8; i++) + out_be16(&uccup->cchars[i], 0xC000); + out_be16(&uccup->rccm, 0xc0ff); + + /* Configure the GUMR registers for UART */ + if (soft_uart) { + /* Soft-UART requires a 1X multiplier for TX */ + clrsetbits_be32(&uccp->gumr_l, + UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | + UCC_SLOW_GUMR_L_RDCR_MASK, + UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 | + UCC_SLOW_GUMR_L_RDCR_16); + + clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW, + UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX); + } else { + clrsetbits_be32(&uccp->gumr_l, + UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | + UCC_SLOW_GUMR_L_RDCR_MASK, + UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 | + UCC_SLOW_GUMR_L_RDCR_16); + + clrsetbits_be32(&uccp->gumr_h, + UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX, + UCC_SLOW_GUMR_H_RFW); + } + +#ifdef LOOPBACK + clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK, + UCC_SLOW_GUMR_L_DIAG_LOOP); + clrsetbits_be32(&uccp->gumr_h, + UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_RSYN, + UCC_SLOW_GUMR_H_CDS); +#endif + + /* Disable rx interrupts and clear all pending events. */ + out_be16(&uccp->uccm, 0); + out_be16(&uccp->ucce, 0xffff); + out_be16(&uccp->udsr, 0x7e7e); + + /* Initialize UPSMR */ + out_be16(&uccp->upsmr, 0); + + if (soft_uart) { + out_be16(&uccup->supsmr, 0x30); + out_be16(&uccup->res92, 0); + out_be32(&uccup->rx_state, 0); + out_be32(&uccup->rx_cnt, 0); + out_8(&uccup->rx_bitmark, 0); + out_8(&uccup->rx_length, 10); + out_be32(&uccup->dump_ptr, 0x4000); + out_8(&uccup->rx_temp_dlst_qe, 0); + out_be32(&uccup->rx_frame_rem, 0); + out_8(&uccup->rx_frame_rem_size, 0); + /* Soft-UART requires TX to be 1X */ + out_8(&uccup->tx_mode, + UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1); + out_be16(&uccup->tx_state, 0); + out_8(&uccup->resD4, 0); + out_be16(&uccup->resD5, 0); + + /* Set UART mode. + * Enable receive and transmit. + */ + + /* From the microcode errata: + * 1.GUMR_L register, set mode=0010 (QMC). + * 2.Set GUMR_H[17] bit. (UART/AHDLC mode). + * 3.Set GUMR_H[19:20] (Transparent mode) + * 4.Clear GUMR_H[26] (RFW) + * ... + * 6.Receiver must use 16x over sampling + */ + clrsetbits_be32(&uccp->gumr_l, + UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | + UCC_SLOW_GUMR_L_RDCR_MASK, + UCC_SLOW_GUMR_L_MODE_QMC | UCC_SLOW_GUMR_L_TDCR_16 | + UCC_SLOW_GUMR_L_RDCR_16); + + clrsetbits_be32(&uccp->gumr_h, + UCC_SLOW_GUMR_H_RFW | UCC_SLOW_GUMR_H_RSYN, + UCC_SLOW_GUMR_H_SUART | UCC_SLOW_GUMR_H_TRX | + UCC_SLOW_GUMR_H_TTX | UCC_SLOW_GUMR_H_TFL); + +#ifdef LOOPBACK + clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK, + UCC_SLOW_GUMR_L_DIAG_LOOP); + clrbits32(&uccp->gumr_h, UCC_SLOW_GUMR_H_CTSP | + UCC_SLOW_GUMR_H_CDS); +#endif + + cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num); + qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock, + QE_CR_PROTOCOL_UNSPECIFIED, 0); + } else { + cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num); + qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock, + QE_CR_PROTOCOL_UART, 0); + } +} + +/* + * Initialize the port. + */ +static int qe_uart_startup(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + int ret; + + /* + * If we're using Soft-UART mode, then we need to make sure the + * firmware has been uploaded first. + */ + if (soft_uart && !firmware_loaded) { + dev_err(port->dev, "Soft-UART firmware not uploaded\n"); + return -ENODEV; + } + + qe_uart_initbd(qe_port); + qe_uart_init_ucc(qe_port); + + /* Install interrupt handler. */ + ret = request_irq(port->irq, qe_uart_int, IRQF_SHARED, "ucc-uart", + qe_port); + if (ret) { + dev_err(port->dev, "could not claim IRQ %u\n", port->irq); + return ret; + } + + /* Startup rx-int */ + setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX); + ucc_slow_enable(qe_port->us_private, COMM_DIR_RX_AND_TX); + + return 0; +} + +/* + * Shutdown the port. + */ +static void qe_uart_shutdown(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct ucc_slow __iomem *uccp = qe_port->uccp; + unsigned int timeout = 20; + + /* Disable RX and TX */ + + /* Wait for all the BDs marked sent */ + while (!qe_uart_tx_empty(port)) { + if (!--timeout) { + dev_warn(port->dev, "shutdown timeout\n"); + break; + } + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(2); + } + + if (qe_port->wait_closing) { + /* Wait a bit longer */ + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(qe_port->wait_closing); + } + + /* Stop uarts */ + ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX); + clrbits16(&uccp->uccm, UCC_UART_UCCE_TX | UCC_UART_UCCE_RX); + + /* Shut them really down and reinit buffer descriptors */ + ucc_slow_graceful_stop_tx(qe_port->us_private); + qe_uart_initbd(qe_port); + + free_irq(port->irq, qe_port); +} + +/* + * Set the serial port parameters. + */ +static void qe_uart_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct ucc_slow __iomem *uccp = qe_port->uccp; + unsigned int baud; + unsigned long flags; + u16 upsmr = in_be16(&uccp->upsmr); + struct ucc_uart_pram __iomem *uccup = qe_port->uccup; + u16 supsmr = in_be16(&uccup->supsmr); + u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */ + + /* Character length programmed into the mode register is the + * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, + * 1 or 2 stop bits, minus 1. + * The value 'bits' counts this for us. + */ + + /* byte size */ + upsmr &= UCC_UART_UPSMR_CL_MASK; + supsmr &= UCC_UART_SUPSMR_CL_MASK; + + switch (termios->c_cflag & CSIZE) { + case CS5: + upsmr |= UCC_UART_UPSMR_CL_5; + supsmr |= UCC_UART_SUPSMR_CL_5; + char_length += 5; + break; + case CS6: + upsmr |= UCC_UART_UPSMR_CL_6; + supsmr |= UCC_UART_SUPSMR_CL_6; + char_length += 6; + break; + case CS7: + upsmr |= UCC_UART_UPSMR_CL_7; + supsmr |= UCC_UART_SUPSMR_CL_7; + char_length += 7; + break; + default: /* case CS8 */ + upsmr |= UCC_UART_UPSMR_CL_8; + supsmr |= UCC_UART_SUPSMR_CL_8; + char_length += 8; + break; + } + + /* If CSTOPB is set, we want two stop bits */ + if (termios->c_cflag & CSTOPB) { + upsmr |= UCC_UART_UPSMR_SL; + supsmr |= UCC_UART_SUPSMR_SL; + char_length++; /* + SL */ + } + + if (termios->c_cflag & PARENB) { + upsmr |= UCC_UART_UPSMR_PEN; + supsmr |= UCC_UART_SUPSMR_PEN; + char_length++; /* + PEN */ + + if (!(termios->c_cflag & PARODD)) { + upsmr &= ~(UCC_UART_UPSMR_RPM_MASK | + UCC_UART_UPSMR_TPM_MASK); + upsmr |= UCC_UART_UPSMR_RPM_EVEN | + UCC_UART_UPSMR_TPM_EVEN; + supsmr &= ~(UCC_UART_SUPSMR_RPM_MASK | + UCC_UART_SUPSMR_TPM_MASK); + supsmr |= UCC_UART_SUPSMR_RPM_EVEN | + UCC_UART_SUPSMR_TPM_EVEN; + } + } + + /* + * Set up parity check flag + */ + port->read_status_mask = BD_SC_EMPTY | BD_SC_OV; + if (termios->c_iflag & INPCK) + port->read_status_mask |= BD_SC_FR | BD_SC_PR; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= BD_SC_BR; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_PR | BD_SC_FR; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BD_SC_BR; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_OV; + } + /* + * !!! ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + port->read_status_mask &= ~BD_SC_EMPTY; + + baud = uart_get_baud_rate(port, termios, old, 0, 115200); + + /* Do we really need a spinlock here? */ + spin_lock_irqsave(&port->lock, flags); + + out_be16(&uccp->upsmr, upsmr); + if (soft_uart) { + out_be16(&uccup->supsmr, supsmr); + out_8(&uccup->rx_length, char_length); + + /* Soft-UART requires a 1X multiplier for TX */ + qe_setbrg(qe_port->us_info.rx_clock, baud, 16); + qe_setbrg(qe_port->us_info.tx_clock, baud, 1); + } else { + qe_setbrg(qe_port->us_info.rx_clock, baud, 16); + qe_setbrg(qe_port->us_info.tx_clock, baud, 16); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * Return a pointer to a string that describes what kind of port this is. + */ +static const char *qe_uart_type(struct uart_port *port) +{ + return "QE"; +} + +/* + * Allocate any memory and I/O resources required by the port. + */ +static int qe_uart_request_port(struct uart_port *port) +{ + int ret; + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct ucc_slow_info *us_info = &qe_port->us_info; + struct ucc_slow_private *uccs; + unsigned int rx_size, tx_size; + void *bd_virt; + dma_addr_t bd_dma_addr = 0; + + ret = ucc_slow_init(us_info, &uccs); + if (ret) { + dev_err(port->dev, "could not initialize UCC%u\n", + qe_port->ucc_num); + return ret; + } + + qe_port->us_private = uccs; + qe_port->uccp = uccs->us_regs; + qe_port->uccup = (struct ucc_uart_pram *) uccs->us_pram; + qe_port->rx_bd_base = uccs->rx_bd; + qe_port->tx_bd_base = uccs->tx_bd; + + /* + * Allocate the transmit and receive data buffers. + */ + + rx_size = L1_CACHE_ALIGN(qe_port->rx_nrfifos * qe_port->rx_fifosize); + tx_size = L1_CACHE_ALIGN(qe_port->tx_nrfifos * qe_port->tx_fifosize); + + bd_virt = dma_alloc_coherent(port->dev, rx_size + tx_size, &bd_dma_addr, + GFP_KERNEL); + if (!bd_virt) { + dev_err(port->dev, "could not allocate buffer descriptors\n"); + return -ENOMEM; + } + + qe_port->bd_virt = bd_virt; + qe_port->bd_dma_addr = bd_dma_addr; + qe_port->bd_size = rx_size + tx_size; + + qe_port->rx_buf = bd_virt; + qe_port->tx_buf = qe_port->rx_buf + rx_size; + + return 0; +} + +/* + * Configure the port. + * + * We say we're a CPM-type port because that's mostly true. Once the device + * is configured, this driver operates almost identically to the CPM serial + * driver. + */ +static void qe_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_CPM; + qe_uart_request_port(port); + } +} + +/* + * Release any memory and I/O resources that were allocated in + * qe_uart_request_port(). + */ +static void qe_uart_release_port(struct uart_port *port) +{ + struct uart_qe_port *qe_port = + container_of(port, struct uart_qe_port, port); + struct ucc_slow_private *uccs = qe_port->us_private; + + dma_free_coherent(port->dev, qe_port->bd_size, qe_port->bd_virt, + qe_port->bd_dma_addr); + + ucc_slow_free(uccs); +} + +/* + * Verify that the data in serial_struct is suitable for this device. + */ +static int qe_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM) + return -EINVAL; + + if (ser->irq < 0 || ser->irq >= nr_irqs) + return -EINVAL; + + if (ser->baud_base < 9600) + return -EINVAL; + + return 0; +} +/* UART operations + * + * Details on these functions can be found in Documentation/serial/driver + */ +static struct uart_ops qe_uart_pops = { + .tx_empty = qe_uart_tx_empty, + .set_mctrl = qe_uart_set_mctrl, + .get_mctrl = qe_uart_get_mctrl, + .stop_tx = qe_uart_stop_tx, + .start_tx = qe_uart_start_tx, + .stop_rx = qe_uart_stop_rx, + .enable_ms = qe_uart_enable_ms, + .break_ctl = qe_uart_break_ctl, + .startup = qe_uart_startup, + .shutdown = qe_uart_shutdown, + .set_termios = qe_uart_set_termios, + .type = qe_uart_type, + .release_port = qe_uart_release_port, + .request_port = qe_uart_request_port, + .config_port = qe_uart_config_port, + .verify_port = qe_uart_verify_port, +}; + +/* + * Obtain the SOC model number and revision level + * + * This function parses the device tree to obtain the SOC model. It then + * reads the SVR register to the revision. + * + * The device tree stores the SOC model two different ways. + * + * The new way is: + * + * cpu@0 { + * compatible = "PowerPC,8323"; + * device_type = "cpu"; + * ... + * + * + * The old way is: + * PowerPC,8323@0 { + * device_type = "cpu"; + * ... + * + * This code first checks the new way, and then the old way. + */ +static unsigned int soc_info(unsigned int *rev_h, unsigned int *rev_l) +{ + struct device_node *np; + const char *soc_string; + unsigned int svr; + unsigned int soc; + + /* Find the CPU node */ + np = of_find_node_by_type(NULL, "cpu"); + if (!np) + return 0; + /* Find the compatible property */ + soc_string = of_get_property(np, "compatible", NULL); + if (!soc_string) + /* No compatible property, so try the name. */ + soc_string = np->name; + + /* Extract the SOC number from the "PowerPC," string */ + if ((sscanf(soc_string, "PowerPC,%u", &soc) != 1) || !soc) + return 0; + + /* Get the revision from the SVR */ + svr = mfspr(SPRN_SVR); + *rev_h = (svr >> 4) & 0xf; + *rev_l = svr & 0xf; + + return soc; +} + +/* + * requst_firmware_nowait() callback function + * + * This function is called by the kernel when a firmware is made available, + * or if it times out waiting for the firmware. + */ +static void uart_firmware_cont(const struct firmware *fw, void *context) +{ + struct qe_firmware *firmware; + struct device *dev = context; + int ret; + + if (!fw) { + dev_err(dev, "firmware not found\n"); + return; + } + + firmware = (struct qe_firmware *) fw->data; + + if (firmware->header.length != fw->size) { + dev_err(dev, "invalid firmware\n"); + goto out; + } + + ret = qe_upload_firmware(firmware); + if (ret) { + dev_err(dev, "could not load firmware\n"); + goto out; + } + + firmware_loaded = 1; + out: + release_firmware(fw); +} + +static int ucc_uart_probe(struct platform_device *ofdev, + const struct of_device_id *match) +{ + struct device_node *np = ofdev->dev.of_node; + const unsigned int *iprop; /* Integer OF properties */ + const char *sprop; /* String OF properties */ + struct uart_qe_port *qe_port = NULL; + struct resource res; + int ret; + + /* + * Determine if we need Soft-UART mode + */ + if (of_find_property(np, "soft-uart", NULL)) { + dev_dbg(&ofdev->dev, "using Soft-UART mode\n"); + soft_uart = 1; + } + + /* + * If we are using Soft-UART, determine if we need to upload the + * firmware, too. + */ + if (soft_uart) { + struct qe_firmware_info *qe_fw_info; + + qe_fw_info = qe_get_firmware_info(); + + /* Check if the firmware has been uploaded. */ + if (qe_fw_info && strstr(qe_fw_info->id, "Soft-UART")) { + firmware_loaded = 1; + } else { + char filename[32]; + unsigned int soc; + unsigned int rev_h; + unsigned int rev_l; + + soc = soc_info(&rev_h, &rev_l); + if (!soc) { + dev_err(&ofdev->dev, "unknown CPU model\n"); + return -ENXIO; + } + sprintf(filename, "fsl_qe_ucode_uart_%u_%u%u.bin", + soc, rev_h, rev_l); + + dev_info(&ofdev->dev, "waiting for firmware %s\n", + filename); + + /* + * We call request_firmware_nowait instead of + * request_firmware so that the driver can load and + * initialize the ports without holding up the rest of + * the kernel. If hotplug support is enabled in the + * kernel, then we use it. + */ + ret = request_firmware_nowait(THIS_MODULE, + FW_ACTION_HOTPLUG, filename, &ofdev->dev, + GFP_KERNEL, &ofdev->dev, uart_firmware_cont); + if (ret) { + dev_err(&ofdev->dev, + "could not load firmware %s\n", + filename); + return ret; + } + } + } + + qe_port = kzalloc(sizeof(struct uart_qe_port), GFP_KERNEL); + if (!qe_port) { + dev_err(&ofdev->dev, "can't allocate QE port structure\n"); + return -ENOMEM; + } + + /* Search for IRQ and mapbase */ + ret = of_address_to_resource(np, 0, &res); + if (ret) { + dev_err(&ofdev->dev, "missing 'reg' property in device tree\n"); + kfree(qe_port); + return ret; + } + if (!res.start) { + dev_err(&ofdev->dev, "invalid 'reg' property in device tree\n"); + kfree(qe_port); + return -EINVAL; + } + qe_port->port.mapbase = res.start; + + /* Get the UCC number (device ID) */ + /* UCCs are numbered 1-7 */ + iprop = of_get_property(np, "cell-index", NULL); + if (!iprop) { + iprop = of_get_property(np, "device-id", NULL); + if (!iprop) { + kfree(qe_port); + dev_err(&ofdev->dev, "UCC is unspecified in " + "device tree\n"); + return -EINVAL; + } + } + + if ((*iprop < 1) || (*iprop > UCC_MAX_NUM)) { + dev_err(&ofdev->dev, "no support for UCC%u\n", *iprop); + kfree(qe_port); + return -ENODEV; + } + qe_port->ucc_num = *iprop - 1; + + /* + * In the future, we should not require the BRG to be specified in the + * device tree. If no clock-source is specified, then just pick a BRG + * to use. This requires a new QE library function that manages BRG + * assignments. + */ + + sprop = of_get_property(np, "rx-clock-name", NULL); + if (!sprop) { + dev_err(&ofdev->dev, "missing rx-clock-name in device tree\n"); + kfree(qe_port); + return -ENODEV; + } + + qe_port->us_info.rx_clock = qe_clock_source(sprop); + if ((qe_port->us_info.rx_clock < QE_BRG1) || + (qe_port->us_info.rx_clock > QE_BRG16)) { + dev_err(&ofdev->dev, "rx-clock-name must be a BRG for UART\n"); + kfree(qe_port); + return -ENODEV; + } + +#ifdef LOOPBACK + /* In internal loopback mode, TX and RX must use the same clock */ + qe_port->us_info.tx_clock = qe_port->us_info.rx_clock; +#else + sprop = of_get_property(np, "tx-clock-name", NULL); + if (!sprop) { + dev_err(&ofdev->dev, "missing tx-clock-name in device tree\n"); + kfree(qe_port); + return -ENODEV; + } + qe_port->us_info.tx_clock = qe_clock_source(sprop); +#endif + if ((qe_port->us_info.tx_clock < QE_BRG1) || + (qe_port->us_info.tx_clock > QE_BRG16)) { + dev_err(&ofdev->dev, "tx-clock-name must be a BRG for UART\n"); + kfree(qe_port); + return -ENODEV; + } + + /* Get the port number, numbered 0-3 */ + iprop = of_get_property(np, "port-number", NULL); + if (!iprop) { + dev_err(&ofdev->dev, "missing port-number in device tree\n"); + kfree(qe_port); + return -EINVAL; + } + qe_port->port.line = *iprop; + if (qe_port->port.line >= UCC_MAX_UART) { + dev_err(&ofdev->dev, "port-number must be 0-%u\n", + UCC_MAX_UART - 1); + kfree(qe_port); + return -EINVAL; + } + + qe_port->port.irq = irq_of_parse_and_map(np, 0); + if (qe_port->port.irq == NO_IRQ) { + dev_err(&ofdev->dev, "could not map IRQ for UCC%u\n", + qe_port->ucc_num + 1); + kfree(qe_port); + return -EINVAL; + } + + /* + * Newer device trees have an "fsl,qe" compatible property for the QE + * node, but we still need to support older device trees. + */ + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!np) { + np = of_find_node_by_type(NULL, "qe"); + if (!np) { + dev_err(&ofdev->dev, "could not find 'qe' node\n"); + kfree(qe_port); + return -EINVAL; + } + } + + iprop = of_get_property(np, "brg-frequency", NULL); + if (!iprop) { + dev_err(&ofdev->dev, + "missing brg-frequency in device tree\n"); + kfree(qe_port); + return -EINVAL; + } + + if (*iprop) + qe_port->port.uartclk = *iprop; + else { + /* + * Older versions of U-Boot do not initialize the brg-frequency + * property, so in this case we assume the BRG frequency is + * half the QE bus frequency. + */ + iprop = of_get_property(np, "bus-frequency", NULL); + if (!iprop) { + dev_err(&ofdev->dev, + "missing QE bus-frequency in device tree\n"); + kfree(qe_port); + return -EINVAL; + } + if (*iprop) + qe_port->port.uartclk = *iprop / 2; + else { + dev_err(&ofdev->dev, + "invalid QE bus-frequency in device tree\n"); + kfree(qe_port); + return -EINVAL; + } + } + + spin_lock_init(&qe_port->port.lock); + qe_port->np = np; + qe_port->port.dev = &ofdev->dev; + qe_port->port.ops = &qe_uart_pops; + qe_port->port.iotype = UPIO_MEM; + + qe_port->tx_nrfifos = TX_NUM_FIFO; + qe_port->tx_fifosize = TX_BUF_SIZE; + qe_port->rx_nrfifos = RX_NUM_FIFO; + qe_port->rx_fifosize = RX_BUF_SIZE; + + qe_port->wait_closing = UCC_WAIT_CLOSING; + qe_port->port.fifosize = 512; + qe_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; + + qe_port->us_info.ucc_num = qe_port->ucc_num; + qe_port->us_info.regs = (phys_addr_t) res.start; + qe_port->us_info.irq = qe_port->port.irq; + + qe_port->us_info.rx_bd_ring_len = qe_port->rx_nrfifos; + qe_port->us_info.tx_bd_ring_len = qe_port->tx_nrfifos; + + /* Make sure ucc_slow_init() initializes both TX and RX */ + qe_port->us_info.init_tx = 1; + qe_port->us_info.init_rx = 1; + + /* Add the port to the uart sub-system. This will cause + * qe_uart_config_port() to be called, so the us_info structure must + * be initialized. + */ + ret = uart_add_one_port(&ucc_uart_driver, &qe_port->port); + if (ret) { + dev_err(&ofdev->dev, "could not add /dev/ttyQE%u\n", + qe_port->port.line); + kfree(qe_port); + return ret; + } + + dev_set_drvdata(&ofdev->dev, qe_port); + + dev_info(&ofdev->dev, "UCC%u assigned to /dev/ttyQE%u\n", + qe_port->ucc_num + 1, qe_port->port.line); + + /* Display the mknod command for this device */ + dev_dbg(&ofdev->dev, "mknod command is 'mknod /dev/ttyQE%u c %u %u'\n", + qe_port->port.line, SERIAL_QE_MAJOR, + SERIAL_QE_MINOR + qe_port->port.line); + + return 0; +} + +static int ucc_uart_remove(struct platform_device *ofdev) +{ + struct uart_qe_port *qe_port = dev_get_drvdata(&ofdev->dev); + + dev_info(&ofdev->dev, "removing /dev/ttyQE%u\n", qe_port->port.line); + + uart_remove_one_port(&ucc_uart_driver, &qe_port->port); + + dev_set_drvdata(&ofdev->dev, NULL); + kfree(qe_port); + + return 0; +} + +static struct of_device_id ucc_uart_match[] = { + { + .type = "serial", + .compatible = "ucc_uart", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, ucc_uart_match); + +static struct of_platform_driver ucc_uart_of_driver = { + .driver = { + .name = "ucc_uart", + .owner = THIS_MODULE, + .of_match_table = ucc_uart_match, + }, + .probe = ucc_uart_probe, + .remove = ucc_uart_remove, +}; + +static int __init ucc_uart_init(void) +{ + int ret; + + printk(KERN_INFO "Freescale QUICC Engine UART device driver\n"); +#ifdef LOOPBACK + printk(KERN_INFO "ucc-uart: Using loopback mode\n"); +#endif + + ret = uart_register_driver(&ucc_uart_driver); + if (ret) { + printk(KERN_ERR "ucc-uart: could not register UART driver\n"); + return ret; + } + + ret = of_register_platform_driver(&ucc_uart_of_driver); + if (ret) + printk(KERN_ERR + "ucc-uart: could not register platform driver\n"); + + return ret; +} + +static void __exit ucc_uart_exit(void) +{ + printk(KERN_INFO + "Freescale QUICC Engine UART device driver unloading\n"); + + of_unregister_platform_driver(&ucc_uart_of_driver); + uart_unregister_driver(&ucc_uart_driver); +} + +module_init(ucc_uart_init); +module_exit(ucc_uart_exit); + +MODULE_DESCRIPTION("Freescale QUICC Engine (QE) UART"); +MODULE_AUTHOR("Timur Tabi "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_QE_MAJOR); + diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c new file mode 100644 index 000000000000..3beb6ab4fa68 --- /dev/null +++ b/drivers/tty/serial/vr41xx_siu.c @@ -0,0 +1,978 @@ +/* + * Driver for NEC VR4100 series Serial Interface Unit. + * + * Copyright (C) 2004-2008 Yoichi Yuasa + * + * Based on drivers/serial/8250.c, by Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if defined(CONFIG_SERIAL_VR41XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define SIU_BAUD_BASE 1152000 +#define SIU_MAJOR 204 +#define SIU_MINOR_BASE 82 + +#define RX_MAX_COUNT 256 +#define TX_MAX_COUNT 15 + +#define SIUIRSEL 0x08 + #define TMICMODE 0x20 + #define TMICTX 0x10 + #define IRMSEL 0x0c + #define IRMSEL_HP 0x08 + #define IRMSEL_TEMIC 0x04 + #define IRMSEL_SHARP 0x00 + #define IRUSESEL 0x02 + #define SIRSEL 0x01 + +static struct uart_port siu_uart_ports[SIU_PORTS_MAX] = { + [0 ... SIU_PORTS_MAX-1] = { + .lock = __SPIN_LOCK_UNLOCKED(siu_uart_ports->lock), + .irq = -1, + }, +}; + +#ifdef CONFIG_SERIAL_VR41XX_CONSOLE +static uint8_t lsr_break_flag[SIU_PORTS_MAX]; +#endif + +#define siu_read(port, offset) readb((port)->membase + (offset)) +#define siu_write(port, offset, value) writeb((value), (port)->membase + (offset)) + +void vr41xx_select_siu_interface(siu_interface_t interface) +{ + struct uart_port *port; + unsigned long flags; + uint8_t irsel; + + port = &siu_uart_ports[0]; + + spin_lock_irqsave(&port->lock, flags); + + irsel = siu_read(port, SIUIRSEL); + if (interface == SIU_INTERFACE_IRDA) + irsel |= SIRSEL; + else + irsel &= ~SIRSEL; + siu_write(port, SIUIRSEL, irsel); + + spin_unlock_irqrestore(&port->lock, flags); +} +EXPORT_SYMBOL_GPL(vr41xx_select_siu_interface); + +void vr41xx_use_irda(irda_use_t use) +{ + struct uart_port *port; + unsigned long flags; + uint8_t irsel; + + port = &siu_uart_ports[0]; + + spin_lock_irqsave(&port->lock, flags); + + irsel = siu_read(port, SIUIRSEL); + if (use == FIR_USE_IRDA) + irsel |= IRUSESEL; + else + irsel &= ~IRUSESEL; + siu_write(port, SIUIRSEL, irsel); + + spin_unlock_irqrestore(&port->lock, flags); +} +EXPORT_SYMBOL_GPL(vr41xx_use_irda); + +void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed) +{ + struct uart_port *port; + unsigned long flags; + uint8_t irsel; + + port = &siu_uart_ports[0]; + + spin_lock_irqsave(&port->lock, flags); + + irsel = siu_read(port, SIUIRSEL); + irsel &= ~(IRMSEL | TMICTX | TMICMODE); + switch (module) { + case SHARP_IRDA: + irsel |= IRMSEL_SHARP; + break; + case TEMIC_IRDA: + irsel |= IRMSEL_TEMIC | TMICMODE; + if (speed == IRDA_TX_4MBPS) + irsel |= TMICTX; + break; + case HP_IRDA: + irsel |= IRMSEL_HP; + break; + default: + break; + } + siu_write(port, SIUIRSEL, irsel); + + spin_unlock_irqrestore(&port->lock, flags); +} +EXPORT_SYMBOL_GPL(vr41xx_select_irda_module); + +static inline void siu_clear_fifo(struct uart_port *port) +{ + siu_write(port, UART_FCR, UART_FCR_ENABLE_FIFO); + siu_write(port, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + siu_write(port, UART_FCR, 0); +} + +static inline unsigned long siu_port_size(struct uart_port *port) +{ + switch (port->type) { + case PORT_VR41XX_SIU: + return 11UL; + case PORT_VR41XX_DSIU: + return 8UL; + } + + return 0; +} + +static inline unsigned int siu_check_type(struct uart_port *port) +{ + if (port->line == 0) + return PORT_VR41XX_SIU; + if (port->line == 1 && port->irq != -1) + return PORT_VR41XX_DSIU; + + return PORT_UNKNOWN; +} + +static inline const char *siu_type_name(struct uart_port *port) +{ + switch (port->type) { + case PORT_VR41XX_SIU: + return "SIU"; + case PORT_VR41XX_DSIU: + return "DSIU"; + } + + return NULL; +} + +static unsigned int siu_tx_empty(struct uart_port *port) +{ + uint8_t lsr; + + lsr = siu_read(port, UART_LSR); + if (lsr & UART_LSR_TEMT) + return TIOCSER_TEMT; + + return 0; +} + +static void siu_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + uint8_t mcr = 0; + + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + siu_write(port, UART_MCR, mcr); +} + +static unsigned int siu_get_mctrl(struct uart_port *port) +{ + uint8_t msr; + unsigned int mctrl = 0; + + msr = siu_read(port, UART_MSR); + if (msr & UART_MSR_DCD) + mctrl |= TIOCM_CAR; + if (msr & UART_MSR_RI) + mctrl |= TIOCM_RNG; + if (msr & UART_MSR_DSR) + mctrl |= TIOCM_DSR; + if (msr & UART_MSR_CTS) + mctrl |= TIOCM_CTS; + + return mctrl; +} + +static void siu_stop_tx(struct uart_port *port) +{ + unsigned long flags; + uint8_t ier; + + spin_lock_irqsave(&port->lock, flags); + + ier = siu_read(port, UART_IER); + ier &= ~UART_IER_THRI; + siu_write(port, UART_IER, ier); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_start_tx(struct uart_port *port) +{ + unsigned long flags; + uint8_t ier; + + spin_lock_irqsave(&port->lock, flags); + + ier = siu_read(port, UART_IER); + ier |= UART_IER_THRI; + siu_write(port, UART_IER, ier); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_stop_rx(struct uart_port *port) +{ + unsigned long flags; + uint8_t ier; + + spin_lock_irqsave(&port->lock, flags); + + ier = siu_read(port, UART_IER); + ier &= ~UART_IER_RLSI; + siu_write(port, UART_IER, ier); + + port->read_status_mask &= ~UART_LSR_DR; + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_enable_ms(struct uart_port *port) +{ + unsigned long flags; + uint8_t ier; + + spin_lock_irqsave(&port->lock, flags); + + ier = siu_read(port, UART_IER); + ier |= UART_IER_MSI; + siu_write(port, UART_IER, ier); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_break_ctl(struct uart_port *port, int ctl) +{ + unsigned long flags; + uint8_t lcr; + + spin_lock_irqsave(&port->lock, flags); + + lcr = siu_read(port, UART_LCR); + if (ctl == -1) + lcr |= UART_LCR_SBC; + else + lcr &= ~UART_LCR_SBC; + siu_write(port, UART_LCR, lcr); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static inline void receive_chars(struct uart_port *port, uint8_t *status) +{ + struct tty_struct *tty; + uint8_t lsr, ch; + char flag; + int max_count = RX_MAX_COUNT; + + tty = port->state->port.tty; + lsr = *status; + + do { + ch = siu_read(port, UART_RX); + port->icount.rx++; + flag = TTY_NORMAL; + +#ifdef CONFIG_SERIAL_VR41XX_CONSOLE + lsr |= lsr_break_flag[port->line]; + lsr_break_flag[port->line] = 0; +#endif + if (unlikely(lsr & (UART_LSR_BI | UART_LSR_FE | + UART_LSR_PE | UART_LSR_OE))) { + if (lsr & UART_LSR_BI) { + lsr &= ~(UART_LSR_FE | UART_LSR_PE); + port->icount.brk++; + + if (uart_handle_break(port)) + goto ignore_char; + } + + if (lsr & UART_LSR_FE) + port->icount.frame++; + if (lsr & UART_LSR_PE) + port->icount.parity++; + if (lsr & UART_LSR_OE) + port->icount.overrun++; + + lsr &= port->read_status_mask; + if (lsr & UART_LSR_BI) + flag = TTY_BREAK; + if (lsr & UART_LSR_FE) + flag = TTY_FRAME; + if (lsr & UART_LSR_PE) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(port, ch)) + goto ignore_char; + + uart_insert_char(port, lsr, UART_LSR_OE, ch, flag); + + ignore_char: + lsr = siu_read(port, UART_LSR); + } while ((lsr & UART_LSR_DR) && (max_count-- > 0)); + + tty_flip_buffer_push(tty); + + *status = lsr; +} + +static inline void check_modem_status(struct uart_port *port) +{ + uint8_t msr; + + msr = siu_read(port, UART_MSR); + if ((msr & UART_MSR_ANY_DELTA) == 0) + return; + if (msr & UART_MSR_DDCD) + uart_handle_dcd_change(port, msr & UART_MSR_DCD); + if (msr & UART_MSR_TERI) + port->icount.rng++; + if (msr & UART_MSR_DDSR) + port->icount.dsr++; + if (msr & UART_MSR_DCTS) + uart_handle_cts_change(port, msr & UART_MSR_CTS); + + wake_up_interruptible(&port->state->port.delta_msr_wait); +} + +static inline void transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit; + int max_count = TX_MAX_COUNT; + + xmit = &port->state->xmit; + + if (port->x_char) { + siu_write(port, UART_TX, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + siu_stop_tx(port); + return; + } + + do { + siu_write(port, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (max_count-- > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + siu_stop_tx(port); +} + +static irqreturn_t siu_interrupt(int irq, void *dev_id) +{ + struct uart_port *port; + uint8_t iir, lsr; + + port = (struct uart_port *)dev_id; + + iir = siu_read(port, UART_IIR); + if (iir & UART_IIR_NO_INT) + return IRQ_NONE; + + lsr = siu_read(port, UART_LSR); + if (lsr & UART_LSR_DR) + receive_chars(port, &lsr); + + check_modem_status(port); + + if (lsr & UART_LSR_THRE) + transmit_chars(port); + + return IRQ_HANDLED; +} + +static int siu_startup(struct uart_port *port) +{ + int retval; + + if (port->membase == NULL) + return -ENODEV; + + siu_clear_fifo(port); + + (void)siu_read(port, UART_LSR); + (void)siu_read(port, UART_RX); + (void)siu_read(port, UART_IIR); + (void)siu_read(port, UART_MSR); + + if (siu_read(port, UART_LSR) == 0xff) + return -ENODEV; + + retval = request_irq(port->irq, siu_interrupt, 0, siu_type_name(port), port); + if (retval) + return retval; + + if (port->type == PORT_VR41XX_DSIU) + vr41xx_enable_dsiuint(DSIUINT_ALL); + + siu_write(port, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irq(&port->lock); + siu_set_mctrl(port, port->mctrl); + spin_unlock_irq(&port->lock); + + siu_write(port, UART_IER, UART_IER_RLSI | UART_IER_RDI); + + (void)siu_read(port, UART_LSR); + (void)siu_read(port, UART_RX); + (void)siu_read(port, UART_IIR); + (void)siu_read(port, UART_MSR); + + return 0; +} + +static void siu_shutdown(struct uart_port *port) +{ + unsigned long flags; + uint8_t lcr; + + siu_write(port, UART_IER, 0); + + spin_lock_irqsave(&port->lock, flags); + + port->mctrl &= ~TIOCM_OUT2; + siu_set_mctrl(port, port->mctrl); + + spin_unlock_irqrestore(&port->lock, flags); + + lcr = siu_read(port, UART_LCR); + lcr &= ~UART_LCR_SBC; + siu_write(port, UART_LCR, lcr); + + siu_clear_fifo(port); + + (void)siu_read(port, UART_RX); + + if (port->type == PORT_VR41XX_DSIU) + vr41xx_disable_dsiuint(DSIUINT_ALL); + + free_irq(port->irq, port); +} + +static void siu_set_termios(struct uart_port *port, struct ktermios *new, + struct ktermios *old) +{ + tcflag_t c_cflag, c_iflag; + uint8_t lcr, fcr, ier; + unsigned int baud, quot; + unsigned long flags; + + c_cflag = new->c_cflag; + switch (c_cflag & CSIZE) { + case CS5: + lcr = UART_LCR_WLEN5; + break; + case CS6: + lcr = UART_LCR_WLEN6; + break; + case CS7: + lcr = UART_LCR_WLEN7; + break; + default: + lcr = UART_LCR_WLEN8; + break; + } + + if (c_cflag & CSTOPB) + lcr |= UART_LCR_STOP; + if (c_cflag & PARENB) + lcr |= UART_LCR_PARITY; + if ((c_cflag & PARODD) != PARODD) + lcr |= UART_LCR_EPAR; + if (c_cflag & CMSPAR) + lcr |= UART_LCR_SPAR; + + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10; + + spin_lock_irqsave(&port->lock, flags); + + uart_update_timeout(port, c_cflag, baud); + + c_iflag = new->c_iflag; + + port->read_status_mask = UART_LSR_THRE | UART_LSR_OE | UART_LSR_DR; + if (c_iflag & INPCK) + port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= UART_LSR_BI; + + port->ignore_status_mask = 0; + if (c_iflag & IGNPAR) + port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (c_iflag & IGNBRK) { + port->ignore_status_mask |= UART_LSR_BI; + if (c_iflag & IGNPAR) + port->ignore_status_mask |= UART_LSR_OE; + } + + if ((c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_LSR_DR; + + ier = siu_read(port, UART_IER); + ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(port, c_cflag)) + ier |= UART_IER_MSI; + siu_write(port, UART_IER, ier); + + siu_write(port, UART_LCR, lcr | UART_LCR_DLAB); + + siu_write(port, UART_DLL, (uint8_t)quot); + siu_write(port, UART_DLM, (uint8_t)(quot >> 8)); + + siu_write(port, UART_LCR, lcr); + + siu_write(port, UART_FCR, fcr); + + siu_set_mctrl(port, port->mctrl); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) +{ + switch (state) { + case 0: + switch (port->type) { + case PORT_VR41XX_SIU: + vr41xx_supply_clock(SIU_CLOCK); + break; + case PORT_VR41XX_DSIU: + vr41xx_supply_clock(DSIU_CLOCK); + break; + } + break; + case 3: + switch (port->type) { + case PORT_VR41XX_SIU: + vr41xx_mask_clock(SIU_CLOCK); + break; + case PORT_VR41XX_DSIU: + vr41xx_mask_clock(DSIU_CLOCK); + break; + } + break; + } +} + +static const char *siu_type(struct uart_port *port) +{ + return siu_type_name(port); +} + +static void siu_release_port(struct uart_port *port) +{ + unsigned long size; + + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + size = siu_port_size(port); + release_mem_region(port->mapbase, size); +} + +static int siu_request_port(struct uart_port *port) +{ + unsigned long size; + struct resource *res; + + size = siu_port_size(port); + res = request_mem_region(port->mapbase, size, siu_type_name(port)); + if (res == NULL) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap(port->mapbase, size); + if (port->membase == NULL) { + release_resource(res); + return -ENOMEM; + } + } + + return 0; +} + +static void siu_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = siu_check_type(port); + (void)siu_request_port(port); + } +} + +static int siu_verify_port(struct uart_port *port, struct serial_struct *serial) +{ + if (port->type != PORT_VR41XX_SIU && port->type != PORT_VR41XX_DSIU) + return -EINVAL; + if (port->irq != serial->irq) + return -EINVAL; + if (port->iotype != serial->io_type) + return -EINVAL; + if (port->mapbase != (unsigned long)serial->iomem_base) + return -EINVAL; + + return 0; +} + +static struct uart_ops siu_uart_ops = { + .tx_empty = siu_tx_empty, + .set_mctrl = siu_set_mctrl, + .get_mctrl = siu_get_mctrl, + .stop_tx = siu_stop_tx, + .start_tx = siu_start_tx, + .stop_rx = siu_stop_rx, + .enable_ms = siu_enable_ms, + .break_ctl = siu_break_ctl, + .startup = siu_startup, + .shutdown = siu_shutdown, + .set_termios = siu_set_termios, + .pm = siu_pm, + .type = siu_type, + .release_port = siu_release_port, + .request_port = siu_request_port, + .config_port = siu_config_port, + .verify_port = siu_verify_port, +}; + +static int siu_init_ports(struct platform_device *pdev) +{ + struct uart_port *port; + struct resource *res; + int *type = pdev->dev.platform_data; + int i; + + if (!type) + return 0; + + port = siu_uart_ports; + for (i = 0; i < SIU_PORTS_MAX; i++) { + port->type = type[i]; + if (port->type == PORT_UNKNOWN) + continue; + port->irq = platform_get_irq(pdev, i); + port->uartclk = SIU_BAUD_BASE * 16; + port->fifosize = 16; + port->regshift = 0; + port->iotype = UPIO_MEM; + port->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; + port->line = i; + res = platform_get_resource(pdev, IORESOURCE_MEM, i); + port->mapbase = res->start; + port++; + } + + return i; +} + +#ifdef CONFIG_SERIAL_VR41XX_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static void wait_for_xmitr(struct uart_port *port) +{ + int timeout = 10000; + uint8_t lsr, msr; + + do { + lsr = siu_read(port, UART_LSR); + if (lsr & UART_LSR_BI) + lsr_break_flag[port->line] = UART_LSR_BI; + + if ((lsr & BOTH_EMPTY) == BOTH_EMPTY) + break; + } while (timeout-- > 0); + + if (port->flags & UPF_CONS_FLOW) { + timeout = 1000000; + + do { + msr = siu_read(port, UART_MSR); + if ((msr & UART_MSR_CTS) != 0) + break; + } while (timeout-- > 0); + } +} + +static void siu_console_putchar(struct uart_port *port, int ch) +{ + wait_for_xmitr(port); + siu_write(port, UART_TX, ch); +} + +static void siu_console_write(struct console *con, const char *s, unsigned count) +{ + struct uart_port *port; + uint8_t ier; + + port = &siu_uart_ports[con->index]; + + ier = siu_read(port, UART_IER); + siu_write(port, UART_IER, 0); + + uart_console_write(port, s, count, siu_console_putchar); + + wait_for_xmitr(port); + siu_write(port, UART_IER, ier); +} + +static int __init siu_console_setup(struct console *con, char *options) +{ + struct uart_port *port; + int baud = 9600; + int parity = 'n'; + int bits = 8; + int flow = 'n'; + + if (con->index >= SIU_PORTS_MAX) + con->index = 0; + + port = &siu_uart_ports[con->index]; + if (port->membase == NULL) { + if (port->mapbase == 0) + return -ENODEV; + port->membase = ioremap(port->mapbase, siu_port_size(port)); + } + + if (port->type == PORT_VR41XX_SIU) + vr41xx_select_siu_interface(SIU_INTERFACE_RS232C); + + if (options != NULL) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, con, baud, parity, bits, flow); +} + +static struct uart_driver siu_uart_driver; + +static struct console siu_console = { + .name = "ttyVR", + .write = siu_console_write, + .device = uart_console_device, + .setup = siu_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &siu_uart_driver, +}; + +static int __devinit siu_console_init(void) +{ + struct uart_port *port; + int i; + + for (i = 0; i < SIU_PORTS_MAX; i++) { + port = &siu_uart_ports[i]; + port->ops = &siu_uart_ops; + } + + register_console(&siu_console); + + return 0; +} + +console_initcall(siu_console_init); + +void __init vr41xx_siu_early_setup(struct uart_port *port) +{ + if (port->type == PORT_UNKNOWN) + return; + + siu_uart_ports[port->line].line = port->line; + siu_uart_ports[port->line].type = port->type; + siu_uart_ports[port->line].uartclk = SIU_BAUD_BASE * 16; + siu_uart_ports[port->line].mapbase = port->mapbase; + siu_uart_ports[port->line].mapbase = port->mapbase; + siu_uart_ports[port->line].ops = &siu_uart_ops; +} + +#define SERIAL_VR41XX_CONSOLE &siu_console +#else +#define SERIAL_VR41XX_CONSOLE NULL +#endif + +static struct uart_driver siu_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "SIU", + .dev_name = "ttyVR", + .major = SIU_MAJOR, + .minor = SIU_MINOR_BASE, + .cons = SERIAL_VR41XX_CONSOLE, +}; + +static int __devinit siu_probe(struct platform_device *dev) +{ + struct uart_port *port; + int num, i, retval; + + num = siu_init_ports(dev); + if (num <= 0) + return -ENODEV; + + siu_uart_driver.nr = num; + retval = uart_register_driver(&siu_uart_driver); + if (retval) + return retval; + + for (i = 0; i < num; i++) { + port = &siu_uart_ports[i]; + port->ops = &siu_uart_ops; + port->dev = &dev->dev; + + retval = uart_add_one_port(&siu_uart_driver, port); + if (retval < 0) { + port->dev = NULL; + break; + } + } + + if (i == 0 && retval < 0) { + uart_unregister_driver(&siu_uart_driver); + return retval; + } + + return 0; +} + +static int __devexit siu_remove(struct platform_device *dev) +{ + struct uart_port *port; + int i; + + for (i = 0; i < siu_uart_driver.nr; i++) { + port = &siu_uart_ports[i]; + if (port->dev == &dev->dev) { + uart_remove_one_port(&siu_uart_driver, port); + port->dev = NULL; + } + } + + uart_unregister_driver(&siu_uart_driver); + + return 0; +} + +static int siu_suspend(struct platform_device *dev, pm_message_t state) +{ + struct uart_port *port; + int i; + + for (i = 0; i < siu_uart_driver.nr; i++) { + port = &siu_uart_ports[i]; + if ((port->type == PORT_VR41XX_SIU || + port->type == PORT_VR41XX_DSIU) && port->dev == &dev->dev) + uart_suspend_port(&siu_uart_driver, port); + + } + + return 0; +} + +static int siu_resume(struct platform_device *dev) +{ + struct uart_port *port; + int i; + + for (i = 0; i < siu_uart_driver.nr; i++) { + port = &siu_uart_ports[i]; + if ((port->type == PORT_VR41XX_SIU || + port->type == PORT_VR41XX_DSIU) && port->dev == &dev->dev) + uart_resume_port(&siu_uart_driver, port); + } + + return 0; +} + +static struct platform_driver siu_device_driver = { + .probe = siu_probe, + .remove = __devexit_p(siu_remove), + .suspend = siu_suspend, + .resume = siu_resume, + .driver = { + .name = "SIU", + .owner = THIS_MODULE, + }, +}; + +static int __init vr41xx_siu_init(void) +{ + return platform_driver_register(&siu_device_driver); +} + +static void __exit vr41xx_siu_exit(void) +{ + platform_driver_unregister(&siu_device_driver); +} + +module_init(vr41xx_siu_init); +module_exit(vr41xx_siu_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:SIU"); diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c new file mode 100644 index 000000000000..322bf56c0d89 --- /dev/null +++ b/drivers/tty/serial/vt8500_serial.c @@ -0,0 +1,648 @@ +/* + * drivers/serial/vt8500_serial.c + * + * Copyright (C) 2010 Alexey Charkov + * + * Based on msm_serial.c, which is: + * Copyright (C) 2007 Google, Inc. + * Author: Robert Love + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#if defined(CONFIG_SERIAL_VT8500_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +# define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * UART Register offsets + */ + +#define VT8500_URTDR 0x0000 /* Transmit data */ +#define VT8500_URRDR 0x0004 /* Receive data */ +#define VT8500_URDIV 0x0008 /* Clock/Baud rate divisor */ +#define VT8500_URLCR 0x000C /* Line control */ +#define VT8500_URICR 0x0010 /* IrDA control */ +#define VT8500_URIER 0x0014 /* Interrupt enable */ +#define VT8500_URISR 0x0018 /* Interrupt status */ +#define VT8500_URUSR 0x001c /* UART status */ +#define VT8500_URFCR 0x0020 /* FIFO control */ +#define VT8500_URFIDX 0x0024 /* FIFO index */ +#define VT8500_URBKR 0x0028 /* Break signal count */ +#define VT8500_URTOD 0x002c /* Time out divisor */ +#define VT8500_TXFIFO 0x1000 /* Transmit FIFO (16x8) */ +#define VT8500_RXFIFO 0x1020 /* Receive FIFO (16x10) */ + +/* + * Interrupt enable and status bits + */ + +#define TXDE (1 << 0) /* Tx Data empty */ +#define RXDF (1 << 1) /* Rx Data full */ +#define TXFAE (1 << 2) /* Tx FIFO almost empty */ +#define TXFE (1 << 3) /* Tx FIFO empty */ +#define RXFAF (1 << 4) /* Rx FIFO almost full */ +#define RXFF (1 << 5) /* Rx FIFO full */ +#define TXUDR (1 << 6) /* Tx underrun */ +#define RXOVER (1 << 7) /* Rx overrun */ +#define PER (1 << 8) /* Parity error */ +#define FER (1 << 9) /* Frame error */ +#define TCTS (1 << 10) /* Toggle of CTS */ +#define RXTOUT (1 << 11) /* Rx timeout */ +#define BKDONE (1 << 12) /* Break signal done */ +#define ERR (1 << 13) /* AHB error response */ + +#define RX_FIFO_INTS (RXFAF | RXFF | RXOVER | PER | FER | RXTOUT) +#define TX_FIFO_INTS (TXFAE | TXFE | TXUDR) + +struct vt8500_port { + struct uart_port uart; + char name[16]; + struct clk *clk; + unsigned int ier; +}; + +static inline void vt8500_write(struct uart_port *port, unsigned int val, + unsigned int off) +{ + writel(val, port->membase + off); +} + +static inline unsigned int vt8500_read(struct uart_port *port, unsigned int off) +{ + return readl(port->membase + off); +} + +static void vt8500_stop_tx(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = container_of(port, + struct vt8500_port, + uart); + + vt8500_port->ier &= ~TX_FIFO_INTS; + vt8500_write(port, vt8500_port->ier, VT8500_URIER); +} + +static void vt8500_stop_rx(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = container_of(port, + struct vt8500_port, + uart); + + vt8500_port->ier &= ~RX_FIFO_INTS; + vt8500_write(port, vt8500_port->ier, VT8500_URIER); +} + +static void vt8500_enable_ms(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = container_of(port, + struct vt8500_port, + uart); + + vt8500_port->ier |= TCTS; + vt8500_write(port, vt8500_port->ier, VT8500_URIER); +} + +static void handle_rx(struct uart_port *port) +{ + struct tty_struct *tty = tty_port_tty_get(&port->state->port); + if (!tty) { + /* Discard data: no tty available */ + int count = (vt8500_read(port, VT8500_URFIDX) & 0x1f00) >> 8; + u16 ch; + while (count--) + ch = readw(port->membase + VT8500_RXFIFO); + return; + } + + /* + * Handle overrun + */ + if ((vt8500_read(port, VT8500_URISR) & RXOVER)) { + port->icount.overrun++; + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + + /* and now the main RX loop */ + while (vt8500_read(port, VT8500_URFIDX) & 0x1f00) { + unsigned int c; + char flag = TTY_NORMAL; + + c = readw(port->membase + VT8500_RXFIFO) & 0x3ff; + + /* Mask conditions we're ignorning. */ + c &= ~port->read_status_mask; + + if (c & FER) { + port->icount.frame++; + flag = TTY_FRAME; + } else if (c & PER) { + port->icount.parity++; + flag = TTY_PARITY; + } + port->icount.rx++; + + if (!uart_handle_sysrq_char(port, c)) + tty_insert_flip_char(tty, c, flag); + } + + tty_flip_buffer_push(tty); + tty_kref_put(tty); +} + +static void handle_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + if (port->x_char) { + writeb(port->x_char, port->membase + VT8500_TXFIFO); + port->icount.tx++; + port->x_char = 0; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + vt8500_stop_tx(port); + return; + } + + while ((vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16) { + if (uart_circ_empty(xmit)) + break; + + writeb(xmit->buf[xmit->tail], port->membase + VT8500_TXFIFO); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + vt8500_stop_tx(port); +} + +static void vt8500_start_tx(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = container_of(port, + struct vt8500_port, + uart); + + vt8500_port->ier &= ~TX_FIFO_INTS; + vt8500_write(port, vt8500_port->ier, VT8500_URIER); + handle_tx(port); + vt8500_port->ier |= TX_FIFO_INTS; + vt8500_write(port, vt8500_port->ier, VT8500_URIER); +} + +static void handle_delta_cts(struct uart_port *port) +{ + port->icount.cts++; + wake_up_interruptible(&port->state->port.delta_msr_wait); +} + +static irqreturn_t vt8500_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned long isr; + + spin_lock(&port->lock); + isr = vt8500_read(port, VT8500_URISR); + + /* Acknowledge active status bits */ + vt8500_write(port, isr, VT8500_URISR); + + if (isr & RX_FIFO_INTS) + handle_rx(port); + if (isr & TX_FIFO_INTS) + handle_tx(port); + if (isr & TCTS) + handle_delta_cts(port); + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static unsigned int vt8500_tx_empty(struct uart_port *port) +{ + return (vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16 ? + TIOCSER_TEMT : 0; +} + +static unsigned int vt8500_get_mctrl(struct uart_port *port) +{ + unsigned int usr; + + usr = vt8500_read(port, VT8500_URUSR); + if (usr & (1 << 4)) + return TIOCM_CTS; + else + return 0; +} + +static void vt8500_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static void vt8500_break_ctl(struct uart_port *port, int break_ctl) +{ + if (break_ctl) + vt8500_write(port, vt8500_read(port, VT8500_URLCR) | (1 << 9), + VT8500_URLCR); +} + +static int vt8500_set_baud_rate(struct uart_port *port, unsigned int baud) +{ + unsigned long div; + unsigned int loops = 1000; + + div = vt8500_read(port, VT8500_URDIV) & ~(0x3ff); + + if (unlikely((baud < 900) || (baud > 921600))) + div |= 7; + else + div |= (921600 / baud) - 1; + + while ((vt8500_read(port, VT8500_URUSR) & (1 << 5)) && --loops) + cpu_relax(); + vt8500_write(port, div, VT8500_URDIV); + + return baud; +} + +static int vt8500_startup(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = + container_of(port, struct vt8500_port, uart); + int ret; + + snprintf(vt8500_port->name, sizeof(vt8500_port->name), + "vt8500_serial%d", port->line); + + ret = request_irq(port->irq, vt8500_irq, IRQF_TRIGGER_HIGH, + vt8500_port->name, port); + if (unlikely(ret)) + return ret; + + vt8500_write(port, 0x03, VT8500_URLCR); /* enable TX & RX */ + + return 0; +} + +static void vt8500_shutdown(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = + container_of(port, struct vt8500_port, uart); + + vt8500_port->ier = 0; + + /* disable interrupts and FIFOs */ + vt8500_write(&vt8500_port->uart, 0, VT8500_URIER); + vt8500_write(&vt8500_port->uart, 0x880, VT8500_URFCR); + free_irq(port->irq, port); +} + +static void vt8500_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct vt8500_port *vt8500_port = + container_of(port, struct vt8500_port, uart); + unsigned long flags; + unsigned int baud, lcr; + unsigned int loops = 1000; + + spin_lock_irqsave(&port->lock, flags); + + /* calculate and set baud rate */ + baud = uart_get_baud_rate(port, termios, old, 900, 921600); + baud = vt8500_set_baud_rate(port, baud); + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); + + /* calculate parity */ + lcr = vt8500_read(&vt8500_port->uart, VT8500_URLCR); + lcr &= ~((1 << 5) | (1 << 4)); + if (termios->c_cflag & PARENB) { + lcr |= (1 << 4); + termios->c_cflag &= ~CMSPAR; + if (termios->c_cflag & PARODD) + lcr |= (1 << 5); + } + + /* calculate bits per char */ + lcr &= ~(1 << 2); + switch (termios->c_cflag & CSIZE) { + case CS7: + break; + case CS8: + default: + lcr |= (1 << 2); + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + break; + } + + /* calculate stop bits */ + lcr &= ~(1 << 3); + if (termios->c_cflag & CSTOPB) + lcr |= (1 << 3); + + /* set parity, bits per char, and stop bit */ + vt8500_write(&vt8500_port->uart, lcr, VT8500_URLCR); + + /* Configure status bits to ignore based on termio flags. */ + port->read_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->read_status_mask = FER | PER; + + uart_update_timeout(port, termios->c_cflag, baud); + + /* Reset FIFOs */ + vt8500_write(&vt8500_port->uart, 0x88c, VT8500_URFCR); + while ((vt8500_read(&vt8500_port->uart, VT8500_URFCR) & 0xc) + && --loops) + cpu_relax(); + + /* Every possible FIFO-related interrupt */ + vt8500_port->ier = RX_FIFO_INTS | TX_FIFO_INTS; + + /* + * CTS flow control + */ + if (UART_ENABLE_MS(&vt8500_port->uart, termios->c_cflag)) + vt8500_port->ier |= TCTS; + + vt8500_write(&vt8500_port->uart, 0x881, VT8500_URFCR); + vt8500_write(&vt8500_port->uart, vt8500_port->ier, VT8500_URIER); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *vt8500_type(struct uart_port *port) +{ + struct vt8500_port *vt8500_port = + container_of(port, struct vt8500_port, uart); + return vt8500_port->name; +} + +static void vt8500_release_port(struct uart_port *port) +{ +} + +static int vt8500_request_port(struct uart_port *port) +{ + return 0; +} + +static void vt8500_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_VT8500; +} + +static int vt8500_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_VT8500)) + return -EINVAL; + if (unlikely(port->irq != ser->irq)) + return -EINVAL; + return 0; +} + +static struct vt8500_port *vt8500_uart_ports[4]; +static struct uart_driver vt8500_uart_driver; + +#ifdef CONFIG_SERIAL_VT8500_CONSOLE + +static inline void wait_for_xmitr(struct uart_port *port) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = vt8500_read(port, VT8500_URFIDX); + + if (--tmout == 0) + break; + udelay(1); + } while (status & 0x10); +} + +static void vt8500_console_putchar(struct uart_port *port, int c) +{ + wait_for_xmitr(port); + writeb(c, port->membase + VT8500_TXFIFO); +} + +static void vt8500_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct vt8500_port *vt8500_port = vt8500_uart_ports[co->index]; + unsigned long ier; + + BUG_ON(co->index < 0 || co->index >= vt8500_uart_driver.nr); + + ier = vt8500_read(&vt8500_port->uart, VT8500_URIER); + vt8500_write(&vt8500_port->uart, VT8500_URIER, 0); + + uart_console_write(&vt8500_port->uart, s, count, + vt8500_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and switch back to FIFO + */ + wait_for_xmitr(&vt8500_port->uart); + vt8500_write(&vt8500_port->uart, VT8500_URIER, ier); +} + +static int __init vt8500_console_setup(struct console *co, char *options) +{ + struct vt8500_port *vt8500_port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (unlikely(co->index >= vt8500_uart_driver.nr || co->index < 0)) + return -ENXIO; + + vt8500_port = vt8500_uart_ports[co->index]; + + if (!vt8500_port) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&vt8500_port->uart, + co, baud, parity, bits, flow); +} + +static struct console vt8500_console = { + .name = "ttyWMT", + .write = vt8500_console_write, + .device = uart_console_device, + .setup = vt8500_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &vt8500_uart_driver, +}; + +#define VT8500_CONSOLE (&vt8500_console) + +#else +#define VT8500_CONSOLE NULL +#endif + +static struct uart_ops vt8500_uart_pops = { + .tx_empty = vt8500_tx_empty, + .set_mctrl = vt8500_set_mctrl, + .get_mctrl = vt8500_get_mctrl, + .stop_tx = vt8500_stop_tx, + .start_tx = vt8500_start_tx, + .stop_rx = vt8500_stop_rx, + .enable_ms = vt8500_enable_ms, + .break_ctl = vt8500_break_ctl, + .startup = vt8500_startup, + .shutdown = vt8500_shutdown, + .set_termios = vt8500_set_termios, + .type = vt8500_type, + .release_port = vt8500_release_port, + .request_port = vt8500_request_port, + .config_port = vt8500_config_port, + .verify_port = vt8500_verify_port, +}; + +static struct uart_driver vt8500_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "vt8500_serial", + .dev_name = "ttyWMT", + .nr = 6, + .cons = VT8500_CONSOLE, +}; + +static int __init vt8500_serial_probe(struct platform_device *pdev) +{ + struct vt8500_port *vt8500_port; + struct resource *mmres, *irqres; + int ret; + + mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!mmres || !irqres) + return -ENODEV; + + vt8500_port = kzalloc(sizeof(struct vt8500_port), GFP_KERNEL); + if (!vt8500_port) + return -ENOMEM; + + vt8500_port->uart.type = PORT_VT8500; + vt8500_port->uart.iotype = UPIO_MEM; + vt8500_port->uart.mapbase = mmres->start; + vt8500_port->uart.irq = irqres->start; + vt8500_port->uart.fifosize = 16; + vt8500_port->uart.ops = &vt8500_uart_pops; + vt8500_port->uart.line = pdev->id; + vt8500_port->uart.dev = &pdev->dev; + vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; + vt8500_port->uart.uartclk = 24000000; + + snprintf(vt8500_port->name, sizeof(vt8500_port->name), + "VT8500 UART%d", pdev->id); + + vt8500_port->uart.membase = ioremap(mmres->start, + mmres->end - mmres->start + 1); + if (!vt8500_port->uart.membase) { + ret = -ENOMEM; + goto err; + } + + vt8500_uart_ports[pdev->id] = vt8500_port; + + uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart); + + platform_set_drvdata(pdev, vt8500_port); + + return 0; + +err: + kfree(vt8500_port); + return ret; +} + +static int __devexit vt8500_serial_remove(struct platform_device *pdev) +{ + struct vt8500_port *vt8500_port = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart); + kfree(vt8500_port); + + return 0; +} + +static struct platform_driver vt8500_platform_driver = { + .probe = vt8500_serial_probe, + .remove = vt8500_serial_remove, + .driver = { + .name = "vt8500_serial", + .owner = THIS_MODULE, + }, +}; + +static int __init vt8500_serial_init(void) +{ + int ret; + + ret = uart_register_driver(&vt8500_uart_driver); + if (unlikely(ret)) + return ret; + + ret = platform_driver_register(&vt8500_platform_driver); + + if (unlikely(ret)) + uart_unregister_driver(&vt8500_uart_driver); + + return ret; +} + +static void __exit vt8500_serial_exit(void) +{ +#ifdef CONFIG_SERIAL_VT8500_CONSOLE + unregister_console(&vt8500_console); +#endif + platform_driver_unregister(&vt8500_platform_driver); + uart_unregister_driver(&vt8500_uart_driver); +} + +module_init(vt8500_serial_init); +module_exit(vt8500_serial_exit); + +MODULE_AUTHOR("Alexey Charkov "); +MODULE_DESCRIPTION("Driver for vt8500 serial device"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c new file mode 100644 index 000000000000..1a7fd3e70315 --- /dev/null +++ b/drivers/tty/serial/zs.c @@ -0,0 +1,1304 @@ +/* + * zs.c: Serial port driver for IOASIC DECstations. + * + * Derived from drivers/sbus/char/sunserial.c by Paul Mackerras. + * Derived from drivers/macintosh/macserial.c by Harald Koerfgen. + * + * DECstation changes + * Copyright (C) 1998-2000 Harald Koerfgen + * Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2007 Maciej W. Rozycki + * + * For the rest of the code the original Copyright applies: + * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * + * + * Note: for IOASIC systems the wiring is as follows: + * + * mouse/keyboard: + * DIN-7 MJ-4 signal SCC + * 2 1 TxD <- A.TxD + * 3 4 RxD -> A.RxD + * + * EIA-232/EIA-423: + * DB-25 MMJ-6 signal SCC + * 2 2 TxD <- B.TxD + * 3 5 RxD -> B.RxD + * 4 RTS <- ~A.RTS + * 5 CTS -> ~B.CTS + * 6 6 DSR -> ~A.SYNC + * 8 CD -> ~B.DCD + * 12 DSRS(DCE) -> ~A.CTS (*) + * 15 TxC -> B.TxC + * 17 RxC -> B.RxC + * 20 1 DTR <- ~A.DTR + * 22 RI -> ~A.DCD + * 23 DSRS(DTE) <- ~B.RTS + * + * (*) EIA-232 defines the signal at this pin to be SCD, while DSRS(DCE) + * is shared with DSRS(DTE) at pin 23. + * + * As you can immediately notice the wiring of the RTS, DTR and DSR signals + * is a bit odd. This makes the handling of port B unnecessarily + * complicated and prevents the use of some automatic modes of operation. + */ + +#if defined(CONFIG_SERIAL_ZS_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include "zs.h" + + +MODULE_AUTHOR("Maciej W. Rozycki "); +MODULE_DESCRIPTION("DECstation Z85C30 serial driver"); +MODULE_LICENSE("GPL"); + + +static char zs_name[] __initdata = "DECstation Z85C30 serial driver version "; +static char zs_version[] __initdata = "0.10"; + +/* + * It would be nice to dynamically allocate everything that + * depends on ZS_NUM_SCCS, so we could support any number of + * Z85C30s, but for now... + */ +#define ZS_NUM_SCCS 2 /* Max # of ZS chips supported. */ +#define ZS_NUM_CHAN 2 /* 2 channels per chip. */ +#define ZS_CHAN_A 0 /* Index of the channel A. */ +#define ZS_CHAN_B 1 /* Index of the channel B. */ +#define ZS_CHAN_IO_SIZE 8 /* IOMEM space size. */ +#define ZS_CHAN_IO_STRIDE 4 /* Register alignment. */ +#define ZS_CHAN_IO_OFFSET 1 /* The SCC resides on the high byte + of the 16-bit IOBUS. */ +#define ZS_CLOCK 7372800 /* Z85C30 PCLK input clock rate. */ + +#define to_zport(uport) container_of(uport, struct zs_port, port) + +struct zs_parms { + resource_size_t scc[ZS_NUM_SCCS]; + int irq[ZS_NUM_SCCS]; +}; + +static struct zs_scc zs_sccs[ZS_NUM_SCCS]; + +static u8 zs_init_regs[ZS_NUM_REGS] __initdata = { + 0, /* write 0 */ + PAR_SPEC, /* write 1 */ + 0, /* write 2 */ + 0, /* write 3 */ + X16CLK | SB1, /* write 4 */ + 0, /* write 5 */ + 0, 0, 0, /* write 6, 7, 8 */ + MIE | DLC | NV, /* write 9 */ + NRZ, /* write 10 */ + TCBR | RCBR, /* write 11 */ + 0, 0, /* BRG time constant, write 12 + 13 */ + BRSRC | BRENABL, /* write 14 */ + 0, /* write 15 */ +}; + +/* + * Debugging. + */ +#undef ZS_DEBUG_REGS + + +/* + * Reading and writing Z85C30 registers. + */ +static void recovery_delay(void) +{ + udelay(2); +} + +static u8 read_zsreg(struct zs_port *zport, int reg) +{ + void __iomem *control = zport->port.membase + ZS_CHAN_IO_OFFSET; + u8 retval; + + if (reg != 0) { + writeb(reg & 0xf, control); + fast_iob(); + recovery_delay(); + } + retval = readb(control); + recovery_delay(); + return retval; +} + +static void write_zsreg(struct zs_port *zport, int reg, u8 value) +{ + void __iomem *control = zport->port.membase + ZS_CHAN_IO_OFFSET; + + if (reg != 0) { + writeb(reg & 0xf, control); + fast_iob(); recovery_delay(); + } + writeb(value, control); + fast_iob(); + recovery_delay(); + return; +} + +static u8 read_zsdata(struct zs_port *zport) +{ + void __iomem *data = zport->port.membase + + ZS_CHAN_IO_STRIDE + ZS_CHAN_IO_OFFSET; + u8 retval; + + retval = readb(data); + recovery_delay(); + return retval; +} + +static void write_zsdata(struct zs_port *zport, u8 value) +{ + void __iomem *data = zport->port.membase + + ZS_CHAN_IO_STRIDE + ZS_CHAN_IO_OFFSET; + + writeb(value, data); + fast_iob(); + recovery_delay(); + return; +} + +#ifdef ZS_DEBUG_REGS +void zs_dump(void) +{ + struct zs_port *zport; + int i, j; + + for (i = 0; i < ZS_NUM_SCCS * ZS_NUM_CHAN; i++) { + zport = &zs_sccs[i / ZS_NUM_CHAN].zport[i % ZS_NUM_CHAN]; + + if (!zport->scc) + continue; + + for (j = 0; j < 16; j++) + printk("W%-2d = 0x%02x\t", j, zport->regs[j]); + printk("\n"); + for (j = 0; j < 16; j++) + printk("R%-2d = 0x%02x\t", j, read_zsreg(zport, j)); + printk("\n\n"); + } +} +#endif + + +static void zs_spin_lock_cond_irq(spinlock_t *lock, int irq) +{ + if (irq) + spin_lock_irq(lock); + else + spin_lock(lock); +} + +static void zs_spin_unlock_cond_irq(spinlock_t *lock, int irq) +{ + if (irq) + spin_unlock_irq(lock); + else + spin_unlock(lock); +} + +static int zs_receive_drain(struct zs_port *zport) +{ + int loops = 10000; + + while ((read_zsreg(zport, R0) & Rx_CH_AV) && --loops) + read_zsdata(zport); + return loops; +} + +static int zs_transmit_drain(struct zs_port *zport, int irq) +{ + struct zs_scc *scc = zport->scc; + int loops = 10000; + + while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && --loops) { + zs_spin_unlock_cond_irq(&scc->zlock, irq); + udelay(2); + zs_spin_lock_cond_irq(&scc->zlock, irq); + } + return loops; +} + +static int zs_line_drain(struct zs_port *zport, int irq) +{ + struct zs_scc *scc = zport->scc; + int loops = 10000; + + while (!(read_zsreg(zport, R1) & ALL_SNT) && --loops) { + zs_spin_unlock_cond_irq(&scc->zlock, irq); + udelay(2); + zs_spin_lock_cond_irq(&scc->zlock, irq); + } + return loops; +} + + +static void load_zsregs(struct zs_port *zport, u8 *regs, int irq) +{ + /* Let the current transmission finish. */ + zs_line_drain(zport, irq); + /* Load 'em up. */ + write_zsreg(zport, R3, regs[3] & ~RxENABLE); + write_zsreg(zport, R5, regs[5] & ~TxENAB); + write_zsreg(zport, R4, regs[4]); + write_zsreg(zport, R9, regs[9]); + write_zsreg(zport, R1, regs[1]); + write_zsreg(zport, R2, regs[2]); + write_zsreg(zport, R10, regs[10]); + write_zsreg(zport, R14, regs[14] & ~BRENABL); + write_zsreg(zport, R11, regs[11]); + write_zsreg(zport, R12, regs[12]); + write_zsreg(zport, R13, regs[13]); + write_zsreg(zport, R14, regs[14]); + write_zsreg(zport, R15, regs[15]); + if (regs[3] & RxENABLE) + write_zsreg(zport, R3, regs[3]); + if (regs[5] & TxENAB) + write_zsreg(zport, R5, regs[5]); + return; +} + + +/* + * Status handling routines. + */ + +/* + * zs_tx_empty() -- get the transmitter empty status + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static unsigned int zs_tx_empty(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + unsigned long flags; + u8 status; + + spin_lock_irqsave(&scc->zlock, flags); + status = read_zsreg(zport, R1); + spin_unlock_irqrestore(&scc->zlock, flags); + + return status & ALL_SNT ? TIOCSER_TEMT : 0; +} + +static unsigned int zs_raw_get_ab_mctrl(struct zs_port *zport_a, + struct zs_port *zport_b) +{ + u8 status_a, status_b; + unsigned int mctrl; + + status_a = read_zsreg(zport_a, R0); + status_b = read_zsreg(zport_b, R0); + + mctrl = ((status_b & CTS) ? TIOCM_CTS : 0) | + ((status_b & DCD) ? TIOCM_CAR : 0) | + ((status_a & DCD) ? TIOCM_RNG : 0) | + ((status_a & SYNC_HUNT) ? TIOCM_DSR : 0); + + return mctrl; +} + +static unsigned int zs_raw_get_mctrl(struct zs_port *zport) +{ + struct zs_port *zport_a = &zport->scc->zport[ZS_CHAN_A]; + + return zport != zport_a ? zs_raw_get_ab_mctrl(zport_a, zport) : 0; +} + +static unsigned int zs_raw_xor_mctrl(struct zs_port *zport) +{ + struct zs_port *zport_a = &zport->scc->zport[ZS_CHAN_A]; + unsigned int mmask, mctrl, delta; + u8 mask_a, mask_b; + + if (zport == zport_a) + return 0; + + mask_a = zport_a->regs[15]; + mask_b = zport->regs[15]; + + mmask = ((mask_b & CTSIE) ? TIOCM_CTS : 0) | + ((mask_b & DCDIE) ? TIOCM_CAR : 0) | + ((mask_a & DCDIE) ? TIOCM_RNG : 0) | + ((mask_a & SYNCIE) ? TIOCM_DSR : 0); + + mctrl = zport->mctrl; + if (mmask) { + mctrl &= ~mmask; + mctrl |= zs_raw_get_ab_mctrl(zport_a, zport) & mmask; + } + + delta = mctrl ^ zport->mctrl; + if (delta) + zport->mctrl = mctrl; + + return delta; +} + +static unsigned int zs_get_mctrl(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + unsigned int mctrl; + + spin_lock(&scc->zlock); + mctrl = zs_raw_get_mctrl(zport); + spin_unlock(&scc->zlock); + + return mctrl; +} + +static void zs_set_mctrl(struct uart_port *uport, unsigned int mctrl) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; + u8 oldloop, newloop; + + spin_lock(&scc->zlock); + if (zport != zport_a) { + if (mctrl & TIOCM_DTR) + zport_a->regs[5] |= DTR; + else + zport_a->regs[5] &= ~DTR; + if (mctrl & TIOCM_RTS) + zport_a->regs[5] |= RTS; + else + zport_a->regs[5] &= ~RTS; + write_zsreg(zport_a, R5, zport_a->regs[5]); + } + + /* Rarely modified, so don't poke at hardware unless necessary. */ + oldloop = zport->regs[14]; + newloop = oldloop; + if (mctrl & TIOCM_LOOP) + newloop |= LOOPBAK; + else + newloop &= ~LOOPBAK; + if (newloop != oldloop) { + zport->regs[14] = newloop; + write_zsreg(zport, R14, zport->regs[14]); + } + spin_unlock(&scc->zlock); +} + +static void zs_raw_stop_tx(struct zs_port *zport) +{ + write_zsreg(zport, R0, RES_Tx_P); + zport->tx_stopped = 1; +} + +static void zs_stop_tx(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + + spin_lock(&scc->zlock); + zs_raw_stop_tx(zport); + spin_unlock(&scc->zlock); +} + +static void zs_raw_transmit_chars(struct zs_port *); + +static void zs_start_tx(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + + spin_lock(&scc->zlock); + if (zport->tx_stopped) { + zs_transmit_drain(zport, 0); + zport->tx_stopped = 0; + zs_raw_transmit_chars(zport); + } + spin_unlock(&scc->zlock); +} + +static void zs_stop_rx(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; + + spin_lock(&scc->zlock); + zport->regs[15] &= ~BRKIE; + zport->regs[1] &= ~(RxINT_MASK | TxINT_ENAB); + zport->regs[1] |= RxINT_DISAB; + + if (zport != zport_a) { + /* A-side DCD tracks RI and SYNC tracks DSR. */ + zport_a->regs[15] &= ~(DCDIE | SYNCIE); + write_zsreg(zport_a, R15, zport_a->regs[15]); + if (!(zport_a->regs[15] & BRKIE)) { + zport_a->regs[1] &= ~EXT_INT_ENAB; + write_zsreg(zport_a, R1, zport_a->regs[1]); + } + + /* This-side DCD tracks DCD and CTS tracks CTS. */ + zport->regs[15] &= ~(DCDIE | CTSIE); + zport->regs[1] &= ~EXT_INT_ENAB; + } else { + /* DCD tracks RI and SYNC tracks DSR for the B side. */ + if (!(zport->regs[15] & (DCDIE | SYNCIE))) + zport->regs[1] &= ~EXT_INT_ENAB; + } + + write_zsreg(zport, R15, zport->regs[15]); + write_zsreg(zport, R1, zport->regs[1]); + spin_unlock(&scc->zlock); +} + +static void zs_enable_ms(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; + + if (zport == zport_a) + return; + + spin_lock(&scc->zlock); + + /* Clear Ext interrupts if not being handled already. */ + if (!(zport_a->regs[1] & EXT_INT_ENAB)) + write_zsreg(zport_a, R0, RES_EXT_INT); + + /* A-side DCD tracks RI and SYNC tracks DSR. */ + zport_a->regs[1] |= EXT_INT_ENAB; + zport_a->regs[15] |= DCDIE | SYNCIE; + + /* This-side DCD tracks DCD and CTS tracks CTS. */ + zport->regs[15] |= DCDIE | CTSIE; + + zs_raw_xor_mctrl(zport); + + write_zsreg(zport_a, R1, zport_a->regs[1]); + write_zsreg(zport_a, R15, zport_a->regs[15]); + write_zsreg(zport, R15, zport->regs[15]); + spin_unlock(&scc->zlock); +} + +static void zs_break_ctl(struct uart_port *uport, int break_state) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + unsigned long flags; + + spin_lock_irqsave(&scc->zlock, flags); + if (break_state == -1) + zport->regs[5] |= SND_BRK; + else + zport->regs[5] &= ~SND_BRK; + write_zsreg(zport, R5, zport->regs[5]); + spin_unlock_irqrestore(&scc->zlock, flags); +} + + +/* + * Interrupt handling routines. + */ +#define Rx_BRK 0x0100 /* BREAK event software flag. */ +#define Rx_SYS 0x0200 /* SysRq event software flag. */ + +static void zs_receive_chars(struct zs_port *zport) +{ + struct uart_port *uport = &zport->port; + struct zs_scc *scc = zport->scc; + struct uart_icount *icount; + unsigned int avail, status, ch, flag; + int count; + + for (count = 16; count; count--) { + spin_lock(&scc->zlock); + avail = read_zsreg(zport, R0) & Rx_CH_AV; + spin_unlock(&scc->zlock); + if (!avail) + break; + + spin_lock(&scc->zlock); + status = read_zsreg(zport, R1) & (Rx_OVR | FRM_ERR | PAR_ERR); + ch = read_zsdata(zport); + spin_unlock(&scc->zlock); + + flag = TTY_NORMAL; + + icount = &uport->icount; + icount->rx++; + + /* Handle the null char got when BREAK is removed. */ + if (!ch) + status |= zport->tty_break; + if (unlikely(status & + (Rx_OVR | FRM_ERR | PAR_ERR | Rx_SYS | Rx_BRK))) { + zport->tty_break = 0; + + /* Reset the error indication. */ + if (status & (Rx_OVR | FRM_ERR | PAR_ERR)) { + spin_lock(&scc->zlock); + write_zsreg(zport, R0, ERR_RES); + spin_unlock(&scc->zlock); + } + + if (status & (Rx_SYS | Rx_BRK)) { + icount->brk++; + /* SysRq discards the null char. */ + if (status & Rx_SYS) + continue; + } else if (status & FRM_ERR) + icount->frame++; + else if (status & PAR_ERR) + icount->parity++; + if (status & Rx_OVR) + icount->overrun++; + + status &= uport->read_status_mask; + if (status & Rx_BRK) + flag = TTY_BREAK; + else if (status & FRM_ERR) + flag = TTY_FRAME; + else if (status & PAR_ERR) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(uport, ch)) + continue; + + uart_insert_char(uport, status, Rx_OVR, ch, flag); + } + + tty_flip_buffer_push(uport->state->port.tty); +} + +static void zs_raw_transmit_chars(struct zs_port *zport) +{ + struct circ_buf *xmit = &zport->port.state->xmit; + + /* XON/XOFF chars. */ + if (zport->port.x_char) { + write_zsdata(zport, zport->port.x_char); + zport->port.icount.tx++; + zport->port.x_char = 0; + return; + } + + /* If nothing to do or stopped or hardware stopped. */ + if (uart_circ_empty(xmit) || uart_tx_stopped(&zport->port)) { + zs_raw_stop_tx(zport); + return; + } + + /* Send char. */ + write_zsdata(zport, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + zport->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&zport->port); + + /* Are we are done? */ + if (uart_circ_empty(xmit)) + zs_raw_stop_tx(zport); +} + +static void zs_transmit_chars(struct zs_port *zport) +{ + struct zs_scc *scc = zport->scc; + + spin_lock(&scc->zlock); + zs_raw_transmit_chars(zport); + spin_unlock(&scc->zlock); +} + +static void zs_status_handle(struct zs_port *zport, struct zs_port *zport_a) +{ + struct uart_port *uport = &zport->port; + struct zs_scc *scc = zport->scc; + unsigned int delta; + u8 status, brk; + + spin_lock(&scc->zlock); + + /* Get status from Read Register 0. */ + status = read_zsreg(zport, R0); + + if (zport->regs[15] & BRKIE) { + brk = status & BRK_ABRT; + if (brk && !zport->brk) { + spin_unlock(&scc->zlock); + if (uart_handle_break(uport)) + zport->tty_break = Rx_SYS; + else + zport->tty_break = Rx_BRK; + spin_lock(&scc->zlock); + } + zport->brk = brk; + } + + if (zport != zport_a) { + delta = zs_raw_xor_mctrl(zport); + spin_unlock(&scc->zlock); + + if (delta & TIOCM_CTS) + uart_handle_cts_change(uport, + zport->mctrl & TIOCM_CTS); + if (delta & TIOCM_CAR) + uart_handle_dcd_change(uport, + zport->mctrl & TIOCM_CAR); + if (delta & TIOCM_RNG) + uport->icount.dsr++; + if (delta & TIOCM_DSR) + uport->icount.rng++; + + if (delta) + wake_up_interruptible(&uport->state->port.delta_msr_wait); + + spin_lock(&scc->zlock); + } + + /* Clear the status condition... */ + write_zsreg(zport, R0, RES_EXT_INT); + + spin_unlock(&scc->zlock); +} + +/* + * This is the Z85C30 driver's generic interrupt routine. + */ +static irqreturn_t zs_interrupt(int irq, void *dev_id) +{ + struct zs_scc *scc = dev_id; + struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; + struct zs_port *zport_b = &scc->zport[ZS_CHAN_B]; + irqreturn_t status = IRQ_NONE; + u8 zs_intreg; + int count; + + /* + * NOTE: The read register 3, which holds the irq status, + * does so for both channels on each chip. Although + * the status value itself must be read from the A + * channel and is only valid when read from channel A. + * Yes... broken hardware... + */ + for (count = 16; count; count--) { + spin_lock(&scc->zlock); + zs_intreg = read_zsreg(zport_a, R3); + spin_unlock(&scc->zlock); + if (!zs_intreg) + break; + + /* + * We do not like losing characters, so we prioritise + * interrupt sources a little bit differently than + * the SCC would, was it allowed to. + */ + if (zs_intreg & CHBRxIP) + zs_receive_chars(zport_b); + if (zs_intreg & CHARxIP) + zs_receive_chars(zport_a); + if (zs_intreg & CHBEXT) + zs_status_handle(zport_b, zport_a); + if (zs_intreg & CHAEXT) + zs_status_handle(zport_a, zport_a); + if (zs_intreg & CHBTxIP) + zs_transmit_chars(zport_b); + if (zs_intreg & CHATxIP) + zs_transmit_chars(zport_a); + + status = IRQ_HANDLED; + } + + return status; +} + + +/* + * Finally, routines used to initialize the serial port. + */ +static int zs_startup(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + unsigned long flags; + int irq_guard; + int ret; + + irq_guard = atomic_add_return(1, &scc->irq_guard); + if (irq_guard == 1) { + ret = request_irq(zport->port.irq, zs_interrupt, + IRQF_SHARED, "scc", scc); + if (ret) { + atomic_add(-1, &scc->irq_guard); + printk(KERN_ERR "zs: can't get irq %d\n", + zport->port.irq); + return ret; + } + } + + spin_lock_irqsave(&scc->zlock, flags); + + /* Clear the receive FIFO. */ + zs_receive_drain(zport); + + /* Clear the interrupt registers. */ + write_zsreg(zport, R0, ERR_RES); + write_zsreg(zport, R0, RES_Tx_P); + /* But Ext only if not being handled already. */ + if (!(zport->regs[1] & EXT_INT_ENAB)) + write_zsreg(zport, R0, RES_EXT_INT); + + /* Finally, enable sequencing and interrupts. */ + zport->regs[1] &= ~RxINT_MASK; + zport->regs[1] |= RxINT_ALL | TxINT_ENAB | EXT_INT_ENAB; + zport->regs[3] |= RxENABLE; + zport->regs[15] |= BRKIE; + write_zsreg(zport, R1, zport->regs[1]); + write_zsreg(zport, R3, zport->regs[3]); + write_zsreg(zport, R5, zport->regs[5]); + write_zsreg(zport, R15, zport->regs[15]); + + /* Record the current state of RR0. */ + zport->mctrl = zs_raw_get_mctrl(zport); + zport->brk = read_zsreg(zport, R0) & BRK_ABRT; + + zport->tx_stopped = 1; + + spin_unlock_irqrestore(&scc->zlock, flags); + + return 0; +} + +static void zs_shutdown(struct uart_port *uport) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + unsigned long flags; + int irq_guard; + + spin_lock_irqsave(&scc->zlock, flags); + + zport->regs[3] &= ~RxENABLE; + write_zsreg(zport, R5, zport->regs[5]); + write_zsreg(zport, R3, zport->regs[3]); + + spin_unlock_irqrestore(&scc->zlock, flags); + + irq_guard = atomic_add_return(-1, &scc->irq_guard); + if (!irq_guard) + free_irq(zport->port.irq, scc); +} + + +static void zs_reset(struct zs_port *zport) +{ + struct zs_scc *scc = zport->scc; + int irq; + unsigned long flags; + + spin_lock_irqsave(&scc->zlock, flags); + irq = !irqs_disabled_flags(flags); + if (!scc->initialised) { + /* Reset the pointer first, just in case... */ + read_zsreg(zport, R0); + /* And let the current transmission finish. */ + zs_line_drain(zport, irq); + write_zsreg(zport, R9, FHWRES); + udelay(10); + write_zsreg(zport, R9, 0); + scc->initialised = 1; + } + load_zsregs(zport, zport->regs, irq); + spin_unlock_irqrestore(&scc->zlock, flags); +} + +static void zs_set_termios(struct uart_port *uport, struct ktermios *termios, + struct ktermios *old_termios) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + struct zs_port *zport_a = &scc->zport[ZS_CHAN_A]; + int irq; + unsigned int baud, brg; + unsigned long flags; + + spin_lock_irqsave(&scc->zlock, flags); + irq = !irqs_disabled_flags(flags); + + /* Byte size. */ + zport->regs[3] &= ~RxNBITS_MASK; + zport->regs[5] &= ~TxNBITS_MASK; + switch (termios->c_cflag & CSIZE) { + case CS5: + zport->regs[3] |= Rx5; + zport->regs[5] |= Tx5; + break; + case CS6: + zport->regs[3] |= Rx6; + zport->regs[5] |= Tx6; + break; + case CS7: + zport->regs[3] |= Rx7; + zport->regs[5] |= Tx7; + break; + case CS8: + default: + zport->regs[3] |= Rx8; + zport->regs[5] |= Tx8; + break; + } + + /* Parity and stop bits. */ + zport->regs[4] &= ~(XCLK_MASK | SB_MASK | PAR_ENA | PAR_EVEN); + if (termios->c_cflag & CSTOPB) + zport->regs[4] |= SB2; + else + zport->regs[4] |= SB1; + if (termios->c_cflag & PARENB) + zport->regs[4] |= PAR_ENA; + if (!(termios->c_cflag & PARODD)) + zport->regs[4] |= PAR_EVEN; + switch (zport->clk_mode) { + case 64: + zport->regs[4] |= X64CLK; + break; + case 32: + zport->regs[4] |= X32CLK; + break; + case 16: + zport->regs[4] |= X16CLK; + break; + case 1: + zport->regs[4] |= X1CLK; + break; + default: + BUG(); + } + + baud = uart_get_baud_rate(uport, termios, old_termios, 0, + uport->uartclk / zport->clk_mode / 4); + + brg = ZS_BPS_TO_BRG(baud, uport->uartclk / zport->clk_mode); + zport->regs[12] = brg & 0xff; + zport->regs[13] = (brg >> 8) & 0xff; + + uart_update_timeout(uport, termios->c_cflag, baud); + + uport->read_status_mask = Rx_OVR; + if (termios->c_iflag & INPCK) + uport->read_status_mask |= FRM_ERR | PAR_ERR; + if (termios->c_iflag & (BRKINT | PARMRK)) + uport->read_status_mask |= Rx_BRK; + + uport->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + uport->ignore_status_mask |= FRM_ERR | PAR_ERR; + if (termios->c_iflag & IGNBRK) { + uport->ignore_status_mask |= Rx_BRK; + if (termios->c_iflag & IGNPAR) + uport->ignore_status_mask |= Rx_OVR; + } + + if (termios->c_cflag & CREAD) + zport->regs[3] |= RxENABLE; + else + zport->regs[3] &= ~RxENABLE; + + if (zport != zport_a) { + if (!(termios->c_cflag & CLOCAL)) { + zport->regs[15] |= DCDIE; + } else + zport->regs[15] &= ~DCDIE; + if (termios->c_cflag & CRTSCTS) { + zport->regs[15] |= CTSIE; + } else + zport->regs[15] &= ~CTSIE; + zs_raw_xor_mctrl(zport); + } + + /* Load up the new values. */ + load_zsregs(zport, zport->regs, irq); + + spin_unlock_irqrestore(&scc->zlock, flags); +} + +/* + * Hack alert! + * Required solely so that the initial PROM-based console + * works undisturbed in parallel with this one. + */ +static void zs_pm(struct uart_port *uport, unsigned int state, + unsigned int oldstate) +{ + struct zs_port *zport = to_zport(uport); + + if (state < 3) + zport->regs[5] |= TxENAB; + else + zport->regs[5] &= ~TxENAB; + write_zsreg(zport, R5, zport->regs[5]); +} + + +static const char *zs_type(struct uart_port *uport) +{ + return "Z85C30 SCC"; +} + +static void zs_release_port(struct uart_port *uport) +{ + iounmap(uport->membase); + uport->membase = 0; + release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE); +} + +static int zs_map_port(struct uart_port *uport) +{ + if (!uport->membase) + uport->membase = ioremap_nocache(uport->mapbase, + ZS_CHAN_IO_SIZE); + if (!uport->membase) { + printk(KERN_ERR "zs: Cannot map MMIO\n"); + return -ENOMEM; + } + return 0; +} + +static int zs_request_port(struct uart_port *uport) +{ + int ret; + + if (!request_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE, "scc")) { + printk(KERN_ERR "zs: Unable to reserve MMIO resource\n"); + return -EBUSY; + } + ret = zs_map_port(uport); + if (ret) { + release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE); + return ret; + } + return 0; +} + +static void zs_config_port(struct uart_port *uport, int flags) +{ + struct zs_port *zport = to_zport(uport); + + if (flags & UART_CONFIG_TYPE) { + if (zs_request_port(uport)) + return; + + uport->type = PORT_ZS; + + zs_reset(zport); + } +} + +static int zs_verify_port(struct uart_port *uport, struct serial_struct *ser) +{ + struct zs_port *zport = to_zport(uport); + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_ZS) + ret = -EINVAL; + if (ser->irq != uport->irq) + ret = -EINVAL; + if (ser->baud_base != uport->uartclk / zport->clk_mode / 4) + ret = -EINVAL; + return ret; +} + + +static struct uart_ops zs_ops = { + .tx_empty = zs_tx_empty, + .set_mctrl = zs_set_mctrl, + .get_mctrl = zs_get_mctrl, + .stop_tx = zs_stop_tx, + .start_tx = zs_start_tx, + .stop_rx = zs_stop_rx, + .enable_ms = zs_enable_ms, + .break_ctl = zs_break_ctl, + .startup = zs_startup, + .shutdown = zs_shutdown, + .set_termios = zs_set_termios, + .pm = zs_pm, + .type = zs_type, + .release_port = zs_release_port, + .request_port = zs_request_port, + .config_port = zs_config_port, + .verify_port = zs_verify_port, +}; + +/* + * Initialize Z85C30 port structures. + */ +static int __init zs_probe_sccs(void) +{ + static int probed; + struct zs_parms zs_parms; + int chip, side, irq; + int n_chips = 0; + int i; + + if (probed) + return 0; + + irq = dec_interrupt[DEC_IRQ_SCC0]; + if (irq >= 0) { + zs_parms.scc[n_chips] = IOASIC_SCC0; + zs_parms.irq[n_chips] = dec_interrupt[DEC_IRQ_SCC0]; + n_chips++; + } + irq = dec_interrupt[DEC_IRQ_SCC1]; + if (irq >= 0) { + zs_parms.scc[n_chips] = IOASIC_SCC1; + zs_parms.irq[n_chips] = dec_interrupt[DEC_IRQ_SCC1]; + n_chips++; + } + if (!n_chips) + return -ENXIO; + + probed = 1; + + for (chip = 0; chip < n_chips; chip++) { + spin_lock_init(&zs_sccs[chip].zlock); + for (side = 0; side < ZS_NUM_CHAN; side++) { + struct zs_port *zport = &zs_sccs[chip].zport[side]; + struct uart_port *uport = &zport->port; + + zport->scc = &zs_sccs[chip]; + zport->clk_mode = 16; + + uport->irq = zs_parms.irq[chip]; + uport->uartclk = ZS_CLOCK; + uport->fifosize = 1; + uport->iotype = UPIO_MEM; + uport->flags = UPF_BOOT_AUTOCONF; + uport->ops = &zs_ops; + uport->line = chip * ZS_NUM_CHAN + side; + uport->mapbase = dec_kn_slot_base + + zs_parms.scc[chip] + + (side ^ ZS_CHAN_B) * ZS_CHAN_IO_SIZE; + + for (i = 0; i < ZS_NUM_REGS; i++) + zport->regs[i] = zs_init_regs[i]; + } + } + + return 0; +} + + +#ifdef CONFIG_SERIAL_ZS_CONSOLE +static void zs_console_putchar(struct uart_port *uport, int ch) +{ + struct zs_port *zport = to_zport(uport); + struct zs_scc *scc = zport->scc; + int irq; + unsigned long flags; + + spin_lock_irqsave(&scc->zlock, flags); + irq = !irqs_disabled_flags(flags); + if (zs_transmit_drain(zport, irq)) + write_zsdata(zport, ch); + spin_unlock_irqrestore(&scc->zlock, flags); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ +static void zs_console_write(struct console *co, const char *s, + unsigned int count) +{ + int chip = co->index / ZS_NUM_CHAN, side = co->index % ZS_NUM_CHAN; + struct zs_port *zport = &zs_sccs[chip].zport[side]; + struct zs_scc *scc = zport->scc; + unsigned long flags; + u8 txint, txenb; + int irq; + + /* Disable transmit interrupts and enable the transmitter. */ + spin_lock_irqsave(&scc->zlock, flags); + txint = zport->regs[1]; + txenb = zport->regs[5]; + if (txint & TxINT_ENAB) { + zport->regs[1] = txint & ~TxINT_ENAB; + write_zsreg(zport, R1, zport->regs[1]); + } + if (!(txenb & TxENAB)) { + zport->regs[5] = txenb | TxENAB; + write_zsreg(zport, R5, zport->regs[5]); + } + spin_unlock_irqrestore(&scc->zlock, flags); + + uart_console_write(&zport->port, s, count, zs_console_putchar); + + /* Restore transmit interrupts and the transmitter enable. */ + spin_lock_irqsave(&scc->zlock, flags); + irq = !irqs_disabled_flags(flags); + zs_line_drain(zport, irq); + if (!(txenb & TxENAB)) { + zport->regs[5] &= ~TxENAB; + write_zsreg(zport, R5, zport->regs[5]); + } + if (txint & TxINT_ENAB) { + zport->regs[1] |= TxINT_ENAB; + write_zsreg(zport, R1, zport->regs[1]); + } + spin_unlock_irqrestore(&scc->zlock, flags); +} + +/* + * Setup serial console baud/bits/parity. We do two things here: + * - construct a cflag setting for the first uart_open() + * - initialise the serial port + * Return non-zero if we didn't find a serial port. + */ +static int __init zs_console_setup(struct console *co, char *options) +{ + int chip = co->index / ZS_NUM_CHAN, side = co->index % ZS_NUM_CHAN; + struct zs_port *zport = &zs_sccs[chip].zport[side]; + struct uart_port *uport = &zport->port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + ret = zs_map_port(uport); + if (ret) + return ret; + + zs_reset(zport); + zs_pm(uport, 0, -1); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + return uart_set_options(uport, co, baud, parity, bits, flow); +} + +static struct uart_driver zs_reg; +static struct console zs_console = { + .name = "ttyS", + .write = zs_console_write, + .device = uart_console_device, + .setup = zs_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &zs_reg, +}; + +/* + * Register console. + */ +static int __init zs_serial_console_init(void) +{ + int ret; + + ret = zs_probe_sccs(); + if (ret) + return ret; + register_console(&zs_console); + + return 0; +} + +console_initcall(zs_serial_console_init); + +#define SERIAL_ZS_CONSOLE &zs_console +#else +#define SERIAL_ZS_CONSOLE NULL +#endif /* CONFIG_SERIAL_ZS_CONSOLE */ + +static struct uart_driver zs_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = ZS_NUM_SCCS * ZS_NUM_CHAN, + .cons = SERIAL_ZS_CONSOLE, +}; + +/* zs_init inits the driver. */ +static int __init zs_init(void) +{ + int i, ret; + + pr_info("%s%s\n", zs_name, zs_version); + + /* Find out how many Z85C30 SCCs we have. */ + ret = zs_probe_sccs(); + if (ret) + return ret; + + ret = uart_register_driver(&zs_reg); + if (ret) + return ret; + + for (i = 0; i < ZS_NUM_SCCS * ZS_NUM_CHAN; i++) { + struct zs_scc *scc = &zs_sccs[i / ZS_NUM_CHAN]; + struct zs_port *zport = &scc->zport[i % ZS_NUM_CHAN]; + struct uart_port *uport = &zport->port; + + if (zport->scc) + uart_add_one_port(&zs_reg, uport); + } + + return 0; +} + +static void __exit zs_exit(void) +{ + int i; + + for (i = ZS_NUM_SCCS * ZS_NUM_CHAN - 1; i >= 0; i--) { + struct zs_scc *scc = &zs_sccs[i / ZS_NUM_CHAN]; + struct zs_port *zport = &scc->zport[i % ZS_NUM_CHAN]; + struct uart_port *uport = &zport->port; + + if (zport->scc) + uart_remove_one_port(&zs_reg, uport); + } + + uart_unregister_driver(&zs_reg); +} + +module_init(zs_init); +module_exit(zs_exit); diff --git a/drivers/tty/serial/zs.h b/drivers/tty/serial/zs.h new file mode 100644 index 000000000000..aa921b57d827 --- /dev/null +++ b/drivers/tty/serial/zs.h @@ -0,0 +1,284 @@ +/* + * zs.h: Definitions for the DECstation Z85C30 serial driver. + * + * Adapted from drivers/sbus/char/sunserial.h by Paul Mackerras. + * Adapted from drivers/macintosh/macserial.h by Harald Koerfgen. + * + * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 2004, 2005, 2007 Maciej W. Rozycki + */ +#ifndef _SERIAL_ZS_H +#define _SERIAL_ZS_H + +#ifdef __KERNEL__ + +#define ZS_NUM_REGS 16 + +/* + * This is our internal structure for each serial port's state. + */ +struct zs_port { + struct zs_scc *scc; /* Containing SCC. */ + struct uart_port port; /* Underlying UART. */ + + int clk_mode; /* May be 1, 16, 32, or 64. */ + + unsigned int tty_break; /* Set on BREAK condition. */ + int tx_stopped; /* Output is suspended. */ + + unsigned int mctrl; /* State of modem lines. */ + u8 brk; /* BREAK state from RR0. */ + + u8 regs[ZS_NUM_REGS]; /* Channel write registers. */ +}; + +/* + * Per-SCC state for locking and the interrupt handler. + */ +struct zs_scc { + struct zs_port zport[2]; + spinlock_t zlock; + atomic_t irq_guard; + int initialised; +}; + +#endif /* __KERNEL__ */ + +/* + * Conversion routines to/from brg time constants from/to bits per second. + */ +#define ZS_BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) +#define ZS_BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) + +/* + * The Zilog register set. + */ + +/* Write Register 0 (Command) */ +#define R0 0 /* Register selects */ +#define R1 1 +#define R2 2 +#define R3 3 +#define R4 4 +#define R5 5 +#define R6 6 +#define R7 7 +#define R8 8 +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 + +#define NULLCODE 0 /* Null Code */ +#define POINT_HIGH 0x8 /* Select upper half of registers */ +#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ +#define SEND_ABORT 0x18 /* HDLC Abort */ +#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ +#define RES_Tx_P 0x28 /* Reset TxINT Pending */ +#define ERR_RES 0x30 /* Error Reset */ +#define RES_H_IUS 0x38 /* Reset highest IUS */ + +#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ +#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ +#define RES_EOM_L 0xC0 /* Reset EOM latch */ + +/* Write Register 1 (Tx/Rx/Ext Int Enable and WAIT/DMA Commands) */ +#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ +#define TxINT_ENAB 0x2 /* Tx Int Enable */ +#define PAR_SPEC 0x4 /* Parity is special condition */ + +#define RxINT_DISAB 0 /* Rx Int Disable */ +#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ +#define RxINT_ALL 0x10 /* Int on all Rx Characters or error */ +#define RxINT_ERR 0x18 /* Int on error only */ +#define RxINT_MASK 0x18 + +#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ +#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ +#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ + +/* Write Register 2 (Interrupt Vector) */ + +/* Write Register 3 (Receive Parameters and Control) */ +#define RxENABLE 0x1 /* Rx Enable */ +#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ +#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ +#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ +#define ENT_HM 0x10 /* Enter Hunt Mode */ +#define AUTO_ENAB 0x20 /* Auto Enables */ +#define Rx5 0x0 /* Rx 5 Bits/Character */ +#define Rx7 0x40 /* Rx 7 Bits/Character */ +#define Rx6 0x80 /* Rx 6 Bits/Character */ +#define Rx8 0xc0 /* Rx 8 Bits/Character */ +#define RxNBITS_MASK 0xc0 + +/* Write Register 4 (Transmit/Receive Miscellaneous Parameters and Modes) */ +#define PAR_ENA 0x1 /* Parity Enable */ +#define PAR_EVEN 0x2 /* Parity Even/Odd* */ + +#define SYNC_ENAB 0 /* Sync Modes Enable */ +#define SB1 0x4 /* 1 stop bit/char */ +#define SB15 0x8 /* 1.5 stop bits/char */ +#define SB2 0xc /* 2 stop bits/char */ +#define SB_MASK 0xc + +#define MONSYNC 0 /* 8 Bit Sync character */ +#define BISYNC 0x10 /* 16 bit sync character */ +#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ +#define EXTSYNC 0x30 /* External Sync Mode */ + +#define X1CLK 0x0 /* x1 clock mode */ +#define X16CLK 0x40 /* x16 clock mode */ +#define X32CLK 0x80 /* x32 clock mode */ +#define X64CLK 0xc0 /* x64 clock mode */ +#define XCLK_MASK 0xc0 + +/* Write Register 5 (Transmit Parameters and Controls) */ +#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ +#define RTS 0x2 /* RTS */ +#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ +#define TxENAB 0x8 /* Tx Enable */ +#define SND_BRK 0x10 /* Send Break */ +#define Tx5 0x0 /* Tx 5 bits (or less)/character */ +#define Tx7 0x20 /* Tx 7 bits/character */ +#define Tx6 0x40 /* Tx 6 bits/character */ +#define Tx8 0x60 /* Tx 8 bits/character */ +#define TxNBITS_MASK 0x60 +#define DTR 0x80 /* DTR */ + +/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ + +/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ + +/* Write Register 8 (Transmit Buffer) */ + +/* Write Register 9 (Master Interrupt Control) */ +#define VIS 1 /* Vector Includes Status */ +#define NV 2 /* No Vector */ +#define DLC 4 /* Disable Lower Chain */ +#define MIE 8 /* Master Interrupt Enable */ +#define STATHI 0x10 /* Status high */ +#define SOFTACK 0x20 /* Software Interrupt Acknowledge */ +#define NORESET 0 /* No reset on write to R9 */ +#define CHRB 0x40 /* Reset channel B */ +#define CHRA 0x80 /* Reset channel A */ +#define FHWRES 0xc0 /* Force hardware reset */ + +/* Write Register 10 (Miscellaneous Transmitter/Receiver Control Bits) */ +#define BIT6 1 /* 6 bit/8bit sync */ +#define LOOPMODE 2 /* SDLC Loop mode */ +#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ +#define MARKIDLE 8 /* Mark/flag on idle */ +#define GAOP 0x10 /* Go active on poll */ +#define NRZ 0 /* NRZ mode */ +#define NRZI 0x20 /* NRZI mode */ +#define FM1 0x40 /* FM1 (transition = 1) */ +#define FM0 0x60 /* FM0 (transition = 0) */ +#define CRCPS 0x80 /* CRC Preset I/O */ + +/* Write Register 11 (Clock Mode Control) */ +#define TRxCXT 0 /* TRxC = Xtal output */ +#define TRxCTC 1 /* TRxC = Transmit clock */ +#define TRxCBR 2 /* TRxC = BR Generator Output */ +#define TRxCDP 3 /* TRxC = DPLL output */ +#define TRxCOI 4 /* TRxC O/I */ +#define TCRTxCP 0 /* Transmit clock = RTxC pin */ +#define TCTRxCP 8 /* Transmit clock = TRxC pin */ +#define TCBR 0x10 /* Transmit clock = BR Generator output */ +#define TCDPLL 0x18 /* Transmit clock = DPLL output */ +#define RCRTxCP 0 /* Receive clock = RTxC pin */ +#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ +#define RCBR 0x40 /* Receive clock = BR Generator output */ +#define RCDPLL 0x60 /* Receive clock = DPLL output */ +#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ + +/* Write Register 12 (Lower Byte of Baud Rate Generator Time Constant) */ + +/* Write Register 13 (Upper Byte of Baud Rate Generator Time Constant) */ + +/* Write Register 14 (Miscellaneous Control Bits) */ +#define BRENABL 1 /* Baud rate generator enable */ +#define BRSRC 2 /* Baud rate generator source */ +#define DTRREQ 4 /* DTR/Request function */ +#define AUTOECHO 8 /* Auto Echo */ +#define LOOPBAK 0x10 /* Local loopback */ +#define SEARCH 0x20 /* Enter search mode */ +#define RMC 0x40 /* Reset missing clock */ +#define DISDPLL 0x60 /* Disable DPLL */ +#define SSBR 0x80 /* Set DPLL source = BR generator */ +#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ +#define SFMM 0xc0 /* Set FM mode */ +#define SNRZI 0xe0 /* Set NRZI mode */ + +/* Write Register 15 (External/Status Interrupt Control) */ +#define WR7P_EN 1 /* WR7 Prime SDLC Feature Enable */ +#define ZCIE 2 /* Zero count IE */ +#define DCDIE 8 /* DCD IE */ +#define SYNCIE 0x10 /* Sync/hunt IE */ +#define CTSIE 0x20 /* CTS IE */ +#define TxUIE 0x40 /* Tx Underrun/EOM IE */ +#define BRKIE 0x80 /* Break/Abort IE */ + + +/* Read Register 0 (Transmit/Receive Buffer Status and External Status) */ +#define Rx_CH_AV 0x1 /* Rx Character Available */ +#define ZCOUNT 0x2 /* Zero count */ +#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ +#define DCD 0x8 /* DCD */ +#define SYNC_HUNT 0x10 /* Sync/hunt */ +#define CTS 0x20 /* CTS */ +#define TxEOM 0x40 /* Tx underrun */ +#define BRK_ABRT 0x80 /* Break/Abort */ + +/* Read Register 1 (Special Receive Condition Status) */ +#define ALL_SNT 0x1 /* All sent */ +/* Residue Data for 8 Rx bits/char programmed */ +#define RES3 0x8 /* 0/3 */ +#define RES4 0x4 /* 0/4 */ +#define RES5 0xc /* 0/5 */ +#define RES6 0x2 /* 0/6 */ +#define RES7 0xa /* 0/7 */ +#define RES8 0x6 /* 0/8 */ +#define RES18 0xe /* 1/8 */ +#define RES28 0x0 /* 2/8 */ +/* Special Rx Condition Interrupts */ +#define PAR_ERR 0x10 /* Parity Error */ +#define Rx_OVR 0x20 /* Rx Overrun Error */ +#define FRM_ERR 0x40 /* CRC/Framing Error */ +#define END_FR 0x80 /* End of Frame (SDLC) */ + +/* Read Register 2 (Interrupt Vector (WR2) -- channel A). */ + +/* Read Register 2 (Modified Interrupt Vector -- channel B). */ + +/* Read Register 3 (Interrupt Pending Bits -- channel A only). */ +#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ +#define CHBTxIP 0x2 /* Channel B Tx IP */ +#define CHBRxIP 0x4 /* Channel B Rx IP */ +#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ +#define CHATxIP 0x10 /* Channel A Tx IP */ +#define CHARxIP 0x20 /* Channel A Rx IP */ + +/* Read Register 6 (SDLC FIFO Status and Byte Count LSB) */ + +/* Read Register 7 (SDLC FIFO Status and Byte Count MSB) */ + +/* Read Register 8 (Receive Data) */ + +/* Read Register 10 (Miscellaneous Status Bits) */ +#define ONLOOP 2 /* On loop */ +#define LOOPSEND 0x10 /* Loop sending */ +#define CLK2MIS 0x40 /* Two clocks missing */ +#define CLK1MIS 0x80 /* One clock missing */ + +/* Read Register 12 (Lower Byte of Baud Rate Generator Constant (WR12)) */ + +/* Read Register 13 (Upper Byte of Baud Rate Generator Constant (WR13) */ + +/* Read Register 15 (External/Status Interrupt Control (WR15)) */ + +#endif /* _SERIAL_ZS_H */ -- cgit v1.2.1 From 35b3ac470b982ded560e1b2ec9206a8d186c3459 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 10 Jan 2011 10:26:00 +0800 Subject: iwmc3200wifi: Return proper error for iwm_if_alloc In the case of alloc_netdev_mq failure and kmalloc failure, current implementation returns ERR_PTR(0). As a result, the caller of iwm_if_alloc does not catch the error by IS_ERR macro. Fix it by setting proper error code for ret variable in the failure cases. Signed-off-by: Axel Lin Signed-off-by: John W. Linville --- drivers/net/wireless/iwmc3200wifi/netdev.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c index 13a69ebf2a94..5091d77e02ce 100644 --- a/drivers/net/wireless/iwmc3200wifi/netdev.c +++ b/drivers/net/wireless/iwmc3200wifi/netdev.c @@ -126,6 +126,7 @@ void *iwm_if_alloc(int sizeof_bus, struct device *dev, ndev = alloc_netdev_mq(0, "wlan%d", ether_setup, IWM_TX_QUEUES); if (!ndev) { dev_err(dev, "no memory for network device instance\n"); + ret = -ENOMEM; goto out_priv; } @@ -138,6 +139,7 @@ void *iwm_if_alloc(int sizeof_bus, struct device *dev, GFP_KERNEL); if (!iwm->umac_profile) { dev_err(dev, "Couldn't alloc memory for profile\n"); + ret = -ENOMEM; goto out_profile; } -- cgit v1.2.1 From ccbd4d412dde4b7e858159e5cc8ba7ee4a6cac07 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Tue, 11 Jan 2011 00:47:44 +0100 Subject: rt2x00: Don't leak mem in error path of rt2x00lib_request_firmware() We need to release_firmware() in order not to leak memory. Signed-off-by: Jesper Juhl Acked-by: Ivo van Doorn Acked-by: Pekka Enberg Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00firmware.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c index f0e1eb72befc..be0ff78c1b16 100644 --- a/drivers/net/wireless/rt2x00/rt2x00firmware.c +++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c @@ -58,6 +58,7 @@ static int rt2x00lib_request_firmware(struct rt2x00_dev *rt2x00dev) if (!fw || !fw->size || !fw->data) { ERROR(rt2x00dev, "Failed to read Firmware.\n"); + release_firmware(fw); return -ENOENT; } -- cgit v1.2.1 From 695b83495e2fba9d3a883193cfc9d5eefa96a911 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Thu, 13 Jan 2011 19:02:25 +0000 Subject: IB/srp: Test only once whether iu allocation succeeded Merge the two tests in srp_queuecommand() of whether information unit allocation succeeded into one. An intended side effect of this change is that we fix the warning: drivers/infiniband/ulp/srp/ib_srp.c: In function 'srp_queuecommand': drivers/infiniband/ulp/srp/ib_srp.c:1116: warning: 'req' may be used uninitialized in this function (seen with CONFIG_CC_OPTIMIZE_FOR_SIZE=y at least with gcc 4.4.4) Signed-off-by: Bart Van Assche Acked-by: David Dillow Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srp/ib_srp.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 4b62105ed1e8..b28c2b9db26b 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -1132,15 +1132,12 @@ static int srp_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd) spin_lock_irqsave(&target->lock, flags); iu = __srp_get_tx_iu(target, SRP_IU_CMD); - if (iu) { - req = list_first_entry(&target->free_reqs, struct srp_request, - list); - list_del(&req->list); - } - spin_unlock_irqrestore(&target->lock, flags); - if (!iu) - goto err; + goto err_unlock; + + req = list_first_entry(&target->free_reqs, struct srp_request, list); + list_del(&req->list); + spin_unlock_irqrestore(&target->lock, flags); dev = target->srp_host->srp_dev->dev; ib_dma_sync_single_for_cpu(dev, iu->dma, srp_max_iu_len, @@ -1185,6 +1182,8 @@ err_iu: spin_lock_irqsave(&target->lock, flags); list_add(&req->list, &target->free_reqs); + +err_unlock: spin_unlock_irqrestore(&target->lock, flags); err: -- cgit v1.2.1 From 976534319b0823aae29237d02e29a32ebcd5f910 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 12 Jan 2011 18:26:56 +0000 Subject: sfc: Make efx_get_tx_queue() an inline function Signed-off-by: Ben Hutchings --- drivers/net/sfc/efx.c | 15 +++------------ drivers/net/sfc/net_driver.h | 10 ++++++++-- 2 files changed, 11 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 711449c6e675..c2dc9a525dea 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -1266,27 +1266,18 @@ static void efx_remove_interrupts(struct efx_nic *efx) efx->legacy_irq = 0; } -struct efx_tx_queue * -efx_get_tx_queue(struct efx_nic *efx, unsigned index, unsigned type) -{ - unsigned tx_channel_offset = - separate_tx_channels ? efx->n_channels - efx->n_tx_channels : 0; - EFX_BUG_ON_PARANOID(index >= efx->n_tx_channels || - type >= EFX_TXQ_TYPES); - return &efx->channel[tx_channel_offset + index]->tx_queue[type]; -} - static void efx_set_channels(struct efx_nic *efx) { struct efx_channel *channel; struct efx_tx_queue *tx_queue; - unsigned tx_channel_offset = + + efx->tx_channel_offset = separate_tx_channels ? efx->n_channels - efx->n_tx_channels : 0; /* Channel pointers were set in efx_init_struct() but we now * need to clear them for TX queues in any RX-only channels. */ efx_for_each_channel(channel, efx) { - if (channel->channel - tx_channel_offset >= + if (channel->channel - efx->tx_channel_offset >= efx->n_tx_channels) { efx_for_each_channel_tx_queue(tx_queue, channel) tx_queue->channel = NULL; diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index bdce66ddf93a..28df8665256a 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -735,6 +735,7 @@ struct efx_nic { unsigned next_buffer_table; unsigned n_channels; unsigned n_rx_channels; + unsigned tx_channel_offset; unsigned n_tx_channels; unsigned int rx_buffer_len; unsigned int rx_buffer_order; @@ -929,8 +930,13 @@ efx_get_channel(struct efx_nic *efx, unsigned index) _channel = (_channel->channel + 1 < (_efx)->n_channels) ? \ (_efx)->channel[_channel->channel + 1] : NULL) -extern struct efx_tx_queue * -efx_get_tx_queue(struct efx_nic *efx, unsigned index, unsigned type); +static inline struct efx_tx_queue * +efx_get_tx_queue(struct efx_nic *efx, unsigned index, unsigned type) +{ + EFX_BUG_ON_PARANOID(index >= efx->n_tx_channels || + type >= EFX_TXQ_TYPES); + return &efx->channel[efx->tx_channel_offset + index]->tx_queue[type]; +} static inline struct efx_tx_queue * efx_channel_get_tx_queue(struct efx_channel *channel, unsigned type) -- cgit v1.2.1 From 5b874e25c5c84bc45fc205407286fbe4744f4776 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 12 Jan 2011 19:11:05 +0000 Subject: sfc: Restore the effect of the rss_cpus module parameter Commit a4900ac ("sfc: Create multiple TX queues") accidentally disabled the rss_cpus module parameter. Signed-off-by: Ben Hutchings --- drivers/net/sfc/efx.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index c2dc9a525dea..002bac743843 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -1153,6 +1153,9 @@ static int efx_wanted_channels(void) int count; int cpu; + if (rss_cpus) + return rss_cpus; + if (unlikely(!zalloc_cpumask_var(&core_mask, GFP_KERNEL))) { printk(KERN_WARNING "sfc: RSS disabled due to allocation failure\n"); -- cgit v1.2.1 From 6c9879101442b08581e8a0e3ae6b7f643a78fd63 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 14 Jan 2011 09:13:53 +1100 Subject: md: fix regression resulting in delays in clearing bits in a bitmap commit 589a594be1fb (2.6.37-rc4) fixed a problem were md_thread would sometimes call the ->run function at a bad time. If an error is detected during array start up after the md_thread has been started, the md_thread is killed. This resulted in the ->run function being called once. However the array may not be in a state that it is safe to call ->run. However the fix imposed meant that ->run was not called on a timeout. This means that when an array goes idle, bitmap bits do not get cleared promptly. While the array is busy the bits will still be cleared when appropriate so this is not very serious. There is no risk to data. Change the test so that we only avoid calling ->run when the thread is being stopped. This more explicitly addresses the problem situation. This is suitable for 2.6.37-stable and any -stable kernel to which 589a594be1fb was applied. Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/md.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 0da25daea9be..a3019121dc57 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6042,7 +6042,8 @@ static int md_thread(void * arg) || kthread_should_stop(), thread->timeout); - if (test_and_clear_bit(THREAD_WAKEUP, &thread->flags)) + clear_bit(THREAD_WAKEUP, &thread->flags); + if (!kthread_should_stop()) thread->run(thread->mddev); } -- cgit v1.2.1 From 067032bc628598606056412594042564fcf09e22 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 14 Jan 2011 09:14:33 +1100 Subject: md: Fix single printks with multiple KERN_s Noticed-by: Russell King Signed-off-by: Joe Perches Signed-off-by: NeilBrown --- drivers/md/raid1.c | 5 +++-- drivers/md/raid10.c | 5 +++-- drivers/md/raid5.c | 1 - 3 files changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 845cf95b612c..d50056ba596b 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1027,8 +1027,9 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) } else set_bit(Faulty, &rdev->flags); set_bit(MD_CHANGE_DEVS, &mddev->flags); - printk(KERN_ALERT "md/raid1:%s: Disk failure on %s, disabling device.\n" - KERN_ALERT "md/raid1:%s: Operation continuing on %d devices.\n", + printk(KERN_ALERT + "md/raid1:%s: Disk failure on %s, disabling device.\n" + "md/raid1:%s: Operation continuing on %d devices.\n", mdname(mddev), bdevname(rdev->bdev, b), mdname(mddev), conf->raid_disks - mddev->degraded); } diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 0641674827f0..03825cbce2d4 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1051,8 +1051,9 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) } set_bit(Faulty, &rdev->flags); set_bit(MD_CHANGE_DEVS, &mddev->flags); - printk(KERN_ALERT "md/raid10:%s: Disk failure on %s, disabling device.\n" - KERN_ALERT "md/raid10:%s: Operation continuing on %d devices.\n", + printk(KERN_ALERT + "md/raid10:%s: Disk failure on %s, disabling device.\n" + "md/raid10:%s: Operation continuing on %d devices.\n", mdname(mddev), bdevname(rdev->bdev, b), mdname(mddev), conf->raid_disks - mddev->degraded); } diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index dc574f303f8b..316fbe79389a 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1721,7 +1721,6 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) set_bit(Faulty, &rdev->flags); printk(KERN_ALERT "md/raid:%s: Disk failure on %s, disabling device.\n" - KERN_ALERT "md/raid:%s: Operation continuing on %d devices.\n", mdname(mddev), bdevname(rdev->bdev, b), -- cgit v1.2.1 From 0ca69886a8273ac1350143d562280bfcbe4760dc Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 14 Jan 2011 09:14:33 +1100 Subject: md: Ensure no IO request to get md device before it is properly initialised. When an md device is in the process of coming on line it is possible for an IO request (typically a partition table probe) to get through before the array is fully initialised, which can cause unexpected behaviour (e.g. a crash). So explicitly record when the array is ready for IO and don't allow IO through until then. There is no possibility for a similar problem when the array is going off-line as there must only be one 'open' at that time, and it is busy off-lining the array and so cannot send IO requests. So no memory barrier is needed in md_stop() This has been a bug since commit 409c57f3801 in 2.6.30 which introduced md_make_request. Before then, each personality would register its own make_request_fn when it was ready. This is suitable for any stable kernel from 2.6.30.y onwards. Cc: Signed-off-by: NeilBrown Reported-by: "Hawrylewicz Czarnowski, Przemyslaw" --- drivers/md/md.c | 8 ++++++-- drivers/md/md.h | 3 ++- 2 files changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index a3019121dc57..540347c538f9 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -288,10 +288,12 @@ static int md_make_request(struct request_queue *q, struct bio *bio) int rv; int cpu; - if (mddev == NULL || mddev->pers == NULL) { + if (mddev == NULL || mddev->pers == NULL + || !mddev->ready) { bio_io_error(bio); return 0; } + smp_rmb(); /* Ensure implications of 'active' are visible */ rcu_read_lock(); if (mddev->suspended) { DEFINE_WAIT(__wait); @@ -4564,7 +4566,8 @@ int md_run(mddev_t *mddev) mddev->safemode_timer.data = (unsigned long) mddev; mddev->safemode_delay = (200 * HZ)/1000 +1; /* 200 msec delay */ mddev->in_sync = 1; - + smp_wmb(); + mddev->ready = 1; list_for_each_entry(rdev, &mddev->disks, same_set) if (rdev->raid_disk >= 0) { char nm[20]; @@ -4725,6 +4728,7 @@ EXPORT_SYMBOL_GPL(md_stop_writes); void md_stop(mddev_t *mddev) { + mddev->ready = 0; mddev->pers->stop(mddev); if (mddev->pers->sync_request && mddev->to_remove == NULL) mddev->to_remove = &md_redundancy_group; diff --git a/drivers/md/md.h b/drivers/md/md.h index d05bab55df4e..229675a604f7 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -148,7 +148,8 @@ struct mddev_s * are happening, so run/ * takeover/stop are not safe */ - + int ready; /* See when safe to pass + * IO requests down */ struct gendisk *gendisk; struct kobject kobj; -- cgit v1.2.1 From 43c73ca43b3e03bb228ff9350b6b44d0e560f262 Mon Sep 17 00:00:00 2001 From: Jonathan Brassow Date: Fri, 14 Jan 2011 09:14:33 +1100 Subject: md/raid5: use sysfs_notify_dirent_safe to avoid NULL pointer With the module parameter 'start_dirty_degraded' set, raid5_spare_active() previously called sysfs_notify_dirent() with a NULL argument (rdev->sysfs_state) when a rebuild finished. Signed-off-by: Jonathan Brassow Signed-off-by: Mike Snitzer --- drivers/md/raid5.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 316fbe79389a..9212c077095c 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5338,7 +5338,7 @@ static int raid5_spare_active(mddev_t *mddev) && !test_bit(Faulty, &tmp->rdev->flags) && !test_and_set_bit(In_sync, &tmp->rdev->flags)) { count++; - sysfs_notify_dirent(tmp->rdev->sysfs_state); + sysfs_notify_dirent_safe(tmp->rdev->sysfs_state); } } spin_lock_irqsave(&conf->device_lock, flags); -- cgit v1.2.1 From defad61a5b16352d3e22a04d4c930a5b5a7fd1f0 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 14 Jan 2011 09:14:33 +1100 Subject: md: md_stop_writes requires mddev_lock. As md_stop_writes manipulates the sync_thread and calls md_update_sb, it need to be called with mddev_lock held. In all internal cases it is, but the symbol is exported for dm-raid to call and in that case the lock won't be help. Do make an exported version which takes the lock, and an internal version which does not. Signed-off-by: NeilBrown --- drivers/md/md.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 540347c538f9..f43ff2962b2b 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4704,7 +4704,7 @@ static void md_clean(mddev_t *mddev) mddev->plug = NULL; } -void md_stop_writes(mddev_t *mddev) +static void __md_stop_writes(mddev_t *mddev) { if (mddev->sync_thread) { set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); @@ -4724,6 +4724,13 @@ void md_stop_writes(mddev_t *mddev) md_update_sb(mddev, 1); } } + +void md_stop_writes(mddev_t *mddev) +{ + mddev_lock(mddev); + __md_stop_writes(mddev); + mddev_unlock(mddev); +} EXPORT_SYMBOL_GPL(md_stop_writes); void md_stop(mddev_t *mddev) @@ -4748,7 +4755,7 @@ static int md_set_readonly(mddev_t *mddev, int is_open) goto out; } if (mddev->pers) { - md_stop_writes(mddev); + __md_stop_writes(mddev); err = -ENXIO; if (mddev->ro==1) @@ -4785,7 +4792,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) if (mddev->ro) set_disk_ro(disk, 0); - md_stop_writes(mddev); + __md_stop_writes(mddev); md_stop(mddev); mddev->queue->merge_bvec_fn = NULL; mddev->queue->unplug_fn = NULL; -- cgit v1.2.1 From 7ebc0be7fff4146e87b4078f054977b72998abd3 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 14 Jan 2011 09:14:33 +1100 Subject: md: Be more careful about clearing flags bit in ->recovery Setting ->recovery to 0 is generally not a good idea as it could clear bits that shouldn't be cleared. In particular, MD_RECOVERY_FROZEN should only be cleared on explicit request from user-space. So when we need to clear things, just clear the bits that need clearing. As there are a few different places which reap a resync process - and some do an incomplte job - factor out the code for doing the from md_check_recovery and call that function instead of open coding part of it. Signed-off-by: NeilBrown Reported-by: Jonathan Brassow --- drivers/md/md.c | 86 ++++++++++++++++++++++++++++++++------------------------- 1 file changed, 49 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index f43ff2962b2b..a91dc593f3ca 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3746,6 +3746,8 @@ action_show(mddev_t *mddev, char *page) return sprintf(page, "%s\n", type); } +static void reap_sync_thread(mddev_t *mddev); + static ssize_t action_store(mddev_t *mddev, const char *page, size_t len) { @@ -3760,9 +3762,7 @@ action_store(mddev_t *mddev, const char *page, size_t len) if (cmd_match(page, "idle") || cmd_match(page, "frozen")) { if (mddev->sync_thread) { set_bit(MD_RECOVERY_INTR, &mddev->recovery); - md_unregister_thread(mddev->sync_thread); - mddev->sync_thread = NULL; - mddev->recovery = 0; + reap_sync_thread(mddev); } } else if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) || test_bit(MD_RECOVERY_NEEDED, &mddev->recovery)) @@ -4709,8 +4709,7 @@ static void __md_stop_writes(mddev_t *mddev) if (mddev->sync_thread) { set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); set_bit(MD_RECOVERY_INTR, &mddev->recovery); - md_unregister_thread(mddev->sync_thread); - mddev->sync_thread = NULL; + reap_sync_thread(mddev); } del_timer_sync(&mddev->safemode_timer); @@ -7044,6 +7043,45 @@ static int remove_and_add_spares(mddev_t *mddev) } return spares; } + +static void reap_sync_thread(mddev_t *mddev) +{ + mdk_rdev_t *rdev; + + /* resync has finished, collect result */ + md_unregister_thread(mddev->sync_thread); + mddev->sync_thread = NULL; + if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) && + !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) { + /* success...*/ + /* activate any spares */ + if (mddev->pers->spare_active(mddev)) + sysfs_notify(&mddev->kobj, NULL, + "degraded"); + } + if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) && + mddev->pers->finish_reshape) + mddev->pers->finish_reshape(mddev); + md_update_sb(mddev, 1); + + /* if array is no-longer degraded, then any saved_raid_disk + * information must be scrapped + */ + if (!mddev->degraded) + list_for_each_entry(rdev, &mddev->disks, same_set) + rdev->saved_raid_disk = -1; + + clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery); + clear_bit(MD_RECOVERY_SYNC, &mddev->recovery); + clear_bit(MD_RECOVERY_RESHAPE, &mddev->recovery); + clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery); + clear_bit(MD_RECOVERY_CHECK, &mddev->recovery); + /* flag recovery needed just to double check */ + set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); + sysfs_notify_dirent_safe(mddev->sysfs_action); + md_new_event(mddev); +} + /* * This routine is regularly called by all per-raid-array threads to * deal with generic issues like resync and super-block update. @@ -7068,9 +7106,6 @@ static int remove_and_add_spares(mddev_t *mddev) */ void md_check_recovery(mddev_t *mddev) { - mdk_rdev_t *rdev; - - if (mddev->bitmap) bitmap_daemon_work(mddev); @@ -7138,34 +7173,7 @@ void md_check_recovery(mddev_t *mddev) goto unlock; } if (mddev->sync_thread) { - /* resync has finished, collect result */ - md_unregister_thread(mddev->sync_thread); - mddev->sync_thread = NULL; - if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) && - !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) { - /* success...*/ - /* activate any spares */ - if (mddev->pers->spare_active(mddev)) - sysfs_notify(&mddev->kobj, NULL, - "degraded"); - } - if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) && - mddev->pers->finish_reshape) - mddev->pers->finish_reshape(mddev); - md_update_sb(mddev, 1); - - /* if array is no-longer degraded, then any saved_raid_disk - * information must be scrapped - */ - if (!mddev->degraded) - list_for_each_entry(rdev, &mddev->disks, same_set) - rdev->saved_raid_disk = -1; - - mddev->recovery = 0; - /* flag recovery needed just to double check */ - set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); - sysfs_notify_dirent_safe(mddev->sysfs_action); - md_new_event(mddev); + reap_sync_thread(mddev); goto unlock; } /* Set RUNNING before clearing NEEDED to avoid @@ -7223,7 +7231,11 @@ void md_check_recovery(mddev_t *mddev) " thread...\n", mdname(mddev)); /* leave the spares where they are, it shouldn't hurt */ - mddev->recovery = 0; + clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery); + clear_bit(MD_RECOVERY_SYNC, &mddev->recovery); + clear_bit(MD_RECOVERY_RESHAPE, &mddev->recovery); + clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery); + clear_bit(MD_RECOVERY_CHECK, &mddev->recovery); } else md_wakeup_thread(mddev->sync_thread); sysfs_notify_dirent_safe(mddev->sysfs_action); -- cgit v1.2.1 From 57b2caa394393f8870ed41bdcc38a7542593018f Mon Sep 17 00:00:00 2001 From: Jonathan Brassow Date: Fri, 14 Jan 2011 09:14:33 +1100 Subject: md-new-param-to-calc_dev_sboffset When we allow for separate devices for data and metadata in a later patch, we will need to be able to calculate the superblock offset based on more than the bdev. Signed-off-by: Jonathan Brassow --- drivers/md/md.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index a91dc593f3ca..0a0d7c2f2ff6 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -705,9 +705,9 @@ static struct mdk_personality *find_pers(int level, char *clevel) } /* return the offset of the super block in 512byte sectors */ -static inline sector_t calc_dev_sboffset(struct block_device *bdev) +static inline sector_t calc_dev_sboffset(mdk_rdev_t *rdev) { - sector_t num_sectors = i_size_read(bdev->bd_inode) / 512; + sector_t num_sectors = i_size_read(rdev->bdev->bd_inode) / 512; return MD_NEW_SIZE_SECTORS(num_sectors); } @@ -991,7 +991,7 @@ static int super_90_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version * * It also happens to be a multiple of 4Kb. */ - rdev->sb_start = calc_dev_sboffset(rdev->bdev); + rdev->sb_start = calc_dev_sboffset(rdev); ret = read_disk_sb(rdev, MD_SB_BYTES); if (ret) return ret; @@ -1332,7 +1332,7 @@ super_90_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors) return 0; /* component must fit device */ if (rdev->mddev->bitmap_info.offset) return 0; /* can't move bitmap */ - rdev->sb_start = calc_dev_sboffset(rdev->bdev); + rdev->sb_start = calc_dev_sboffset(rdev); if (!num_sectors || num_sectors > rdev->sb_start) num_sectors = rdev->sb_start; md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size, @@ -5249,7 +5249,7 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info) printk(KERN_INFO "md: nonpersistent superblock ...\n"); rdev->sb_start = i_size_read(rdev->bdev->bd_inode) / 512; } else - rdev->sb_start = calc_dev_sboffset(rdev->bdev); + rdev->sb_start = calc_dev_sboffset(rdev); rdev->sectors = rdev->sb_start; err = bind_rdev_to_array(rdev, mddev); @@ -5316,7 +5316,7 @@ static int hot_add_disk(mddev_t * mddev, dev_t dev) } if (mddev->persistent) - rdev->sb_start = calc_dev_sboffset(rdev->bdev); + rdev->sb_start = calc_dev_sboffset(rdev); else rdev->sb_start = i_size_read(rdev->bdev->bd_inode) / 512; -- cgit v1.2.1 From ccebd4c4159462c96397ae9af9c667bb394d7b70 Mon Sep 17 00:00:00 2001 From: Jonathan Brassow Date: Fri, 14 Jan 2011 09:14:33 +1100 Subject: md-new-param-to_sync_page_io Add new parameter to 'sync_page_io'. The new parameter allows us to distinguish between metadata and data operations. This becomes important later when we add the ability to use separate devices for data and metadata. Signed-off-by: Jonathan Brassow --- drivers/md/bitmap.c | 4 ++-- drivers/md/md.c | 9 ++++++--- drivers/md/md.h | 4 ++-- drivers/md/raid1.c | 28 ++++++++++++---------------- drivers/md/raid10.c | 12 ++++++------ 5 files changed, 28 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 5a1ffe3527aa..1977765ff964 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -210,11 +210,11 @@ static struct page *read_sb_page(mddev_t *mddev, loff_t offset, || test_bit(Faulty, &rdev->flags)) continue; - target = rdev->sb_start + offset + index * (PAGE_SIZE/512); + target = offset + index * (PAGE_SIZE/512); if (sync_page_io(rdev, target, roundup(size, bdev_logical_block_size(rdev->bdev)), - page, READ)) { + page, READ, true)) { page->index = index; attach_page_buffers(page, NULL); /* so that free_buffer will * quietly no-op */ diff --git a/drivers/md/md.c b/drivers/md/md.c index 0a0d7c2f2ff6..0bc10cc4b961 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -795,7 +795,7 @@ static void bi_complete(struct bio *bio, int error) } int sync_page_io(mdk_rdev_t *rdev, sector_t sector, int size, - struct page *page, int rw) + struct page *page, int rw, bool metadata_op) { struct bio *bio = bio_alloc_mddev(GFP_NOIO, 1, rdev->mddev); struct completion event; @@ -804,7 +804,10 @@ int sync_page_io(mdk_rdev_t *rdev, sector_t sector, int size, rw |= REQ_SYNC | REQ_UNPLUG; bio->bi_bdev = rdev->bdev; - bio->bi_sector = sector; + if (metadata_op) + bio->bi_sector = sector + rdev->sb_start; + else + bio->bi_sector = sector + rdev->data_offset; bio_add_page(bio, page, size, 0); init_completion(&event); bio->bi_private = &event; @@ -829,7 +832,7 @@ static int read_disk_sb(mdk_rdev_t * rdev, int size) return 0; - if (!sync_page_io(rdev, rdev->sb_start, size, rdev->sb_page, READ)) + if (!sync_page_io(rdev, 0, size, rdev->sb_page, READ, true)) goto fail; rdev->sb_loaded = 1; return 0; diff --git a/drivers/md/md.h b/drivers/md/md.h index 229675a604f7..7e4f358a26a6 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -498,8 +498,8 @@ extern void md_flush_request(mddev_t *mddev, struct bio *bio); extern void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev, sector_t sector, int size, struct page *page); extern void md_super_wait(mddev_t *mddev); -extern int sync_page_io(mdk_rdev_t *rdev, sector_t sector, int size, - struct page *page, int rw); +extern int sync_page_io(mdk_rdev_t *rdev, sector_t sector, int size, + struct page *page, int rw, bool metadata_op); extern void md_do_sync(mddev_t *mddev); extern void md_new_event(mddev_t *mddev); extern int md_allow_write(mddev_t *mddev); diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index d50056ba596b..a23ffa397ba9 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1365,10 +1365,10 @@ static void sync_request_write(mddev_t *mddev, r1bio_t *r1_bio) */ rdev = conf->mirrors[d].rdev; if (sync_page_io(rdev, - sect + rdev->data_offset, + sect, s<<9, bio->bi_io_vec[idx].bv_page, - READ)) { + READ, false)) { success = 1; break; } @@ -1391,10 +1391,10 @@ static void sync_request_write(mddev_t *mddev, r1bio_t *r1_bio) rdev = conf->mirrors[d].rdev; atomic_add(s, &rdev->corrected_errors); if (sync_page_io(rdev, - sect + rdev->data_offset, + sect, s<<9, bio->bi_io_vec[idx].bv_page, - WRITE) == 0) + WRITE, false) == 0) md_error(mddev, rdev); } d = start; @@ -1406,10 +1406,10 @@ static void sync_request_write(mddev_t *mddev, r1bio_t *r1_bio) continue; rdev = conf->mirrors[d].rdev; if (sync_page_io(rdev, - sect + rdev->data_offset, + sect, s<<9, bio->bi_io_vec[idx].bv_page, - READ) == 0) + READ, false) == 0) md_error(mddev, rdev); } } else { @@ -1489,10 +1489,8 @@ static void fix_read_error(conf_t *conf, int read_disk, rdev = conf->mirrors[d].rdev; if (rdev && test_bit(In_sync, &rdev->flags) && - sync_page_io(rdev, - sect + rdev->data_offset, - s<<9, - conf->tmppage, READ)) + sync_page_io(rdev, sect, s<<9, + conf->tmppage, READ, false)) success = 1; else { d++; @@ -1515,9 +1513,8 @@ static void fix_read_error(conf_t *conf, int read_disk, rdev = conf->mirrors[d].rdev; if (rdev && test_bit(In_sync, &rdev->flags)) { - if (sync_page_io(rdev, - sect + rdev->data_offset, - s<<9, conf->tmppage, WRITE) + if (sync_page_io(rdev, sect, s<<9, + conf->tmppage, WRITE, false) == 0) /* Well, this device is dead */ md_error(mddev, rdev); @@ -1532,9 +1529,8 @@ static void fix_read_error(conf_t *conf, int read_disk, rdev = conf->mirrors[d].rdev; if (rdev && test_bit(In_sync, &rdev->flags)) { - if (sync_page_io(rdev, - sect + rdev->data_offset, - s<<9, conf->tmppage, READ) + if (sync_page_io(rdev, sect, s<<9, + conf->tmppage, READ, false) == 0) /* Well, this device is dead */ md_error(mddev, rdev); diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 03825cbce2d4..69b659544390 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1560,9 +1560,9 @@ static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio) rcu_read_unlock(); success = sync_page_io(rdev, r10_bio->devs[sl].addr + - sect + rdev->data_offset, + sect, s<<9, - conf->tmppage, READ); + conf->tmppage, READ, false); rdev_dec_pending(rdev, mddev); rcu_read_lock(); if (success) @@ -1599,8 +1599,8 @@ static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio) atomic_add(s, &rdev->corrected_errors); if (sync_page_io(rdev, r10_bio->devs[sl].addr + - sect + rdev->data_offset, - s<<9, conf->tmppage, WRITE) + sect, + s<<9, conf->tmppage, WRITE, false) == 0) { /* Well, this device is dead */ printk(KERN_NOTICE @@ -1636,9 +1636,9 @@ static void fix_read_error(conf_t *conf, mddev_t *mddev, r10bio_t *r10_bio) rcu_read_unlock(); if (sync_page_io(rdev, r10_bio->devs[sl].addr + - sect + rdev->data_offset, + sect, s<<9, conf->tmppage, - READ) == 0) { + READ, false) == 0) { /* Well, this device is dead */ printk(KERN_NOTICE "md/raid10:%s: unable to read back " -- cgit v1.2.1 From a6ff7e089c7fca813c956ccbed824087e89a3a49 Mon Sep 17 00:00:00 2001 From: Jonathan Brassow Date: Fri, 14 Jan 2011 09:14:34 +1100 Subject: md: separate meta and data devs Allow the metadata to be on a separate device from the data. This doesn't mean the data and metadata will by on separate physical devices - it simply gives device-mapper and userspace tools more flexibility. Signed-off-by: NeilBrown --- drivers/md/bitmap.c | 6 +++++- drivers/md/md.c | 10 ++++++---- drivers/md/md.h | 6 ++++++ 3 files changed, 17 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 1977765ff964..6cf587196b99 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -264,14 +264,18 @@ static mdk_rdev_t *next_active_rdev(mdk_rdev_t *rdev, mddev_t *mddev) static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait) { mdk_rdev_t *rdev = NULL; + struct block_device *bdev; mddev_t *mddev = bitmap->mddev; while ((rdev = next_active_rdev(rdev, mddev)) != NULL) { int size = PAGE_SIZE; loff_t offset = mddev->bitmap_info.offset; + + bdev = (rdev->meta_bdev) ? rdev->meta_bdev : rdev->bdev; + if (page->index == bitmap->file_pages-1) size = roundup(bitmap->last_page_size, - bdev_logical_block_size(rdev->bdev)); + bdev_logical_block_size(bdev)); /* Just make sure we aren't corrupting data or * metadata */ diff --git a/drivers/md/md.c b/drivers/md/md.c index 0bc10cc4b961..b98a85fd10b6 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -765,7 +765,7 @@ void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev, */ struct bio *bio = bio_alloc_mddev(GFP_NOIO, 1, mddev); - bio->bi_bdev = rdev->bdev; + bio->bi_bdev = rdev->meta_bdev ? rdev->meta_bdev : rdev->bdev; bio->bi_sector = sector; bio_add_page(bio, page, size, 0); bio->bi_private = rdev; @@ -803,7 +803,8 @@ int sync_page_io(mdk_rdev_t *rdev, sector_t sector, int size, rw |= REQ_SYNC | REQ_UNPLUG; - bio->bi_bdev = rdev->bdev; + bio->bi_bdev = (metadata_op && rdev->meta_bdev) ? + rdev->meta_bdev : rdev->bdev; if (metadata_op) bio->bi_sector = sector + rdev->sb_start; else @@ -4435,7 +4436,9 @@ int md_run(mddev_t *mddev) * We don't want the data to overlap the metadata, * Internal Bitmap issues have been handled elsewhere. */ - if (rdev->data_offset < rdev->sb_start) { + if (rdev->meta_bdev) { + /* Nothing to check */; + } else if (rdev->data_offset < rdev->sb_start) { if (mddev->dev_sectors && rdev->data_offset + mddev->dev_sectors > rdev->sb_start) { @@ -5532,7 +5535,6 @@ static int update_size(mddev_t *mddev, sector_t num_sectors) * sb_start or, if that is sync_thread) return -EBUSY; diff --git a/drivers/md/md.h b/drivers/md/md.h index 7e4f358a26a6..eec517ced31a 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -60,6 +60,12 @@ struct mdk_rdev_s mddev_t *mddev; /* RAID array if running */ int last_events; /* IO event timestamp */ + /* + * If meta_bdev is non-NULL, it means that a separate device is + * being used to store the metadata (superblock/bitmap) which + * would otherwise be contained on the same device as the data (bdev). + */ + struct block_device *meta_bdev; struct block_device *bdev; /* block device handle */ struct page *sb_page; -- cgit v1.2.1 From 75d3da43cb74d2e5fb87816dbfecb839cd97c7f4 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 14 Jan 2011 09:14:34 +1100 Subject: md: Don't let implementation detail of curr_resync leak out through sysfs. mddev->curr_resync has artificial values of '1' and '2' which are used by the code which ensures only one resync is happening at a time on any given device. These values are internal and should never be exposed to user-space (except when translated appropriately as in the 'pending' status in /proc/mdstat). Unfortunately they are as ->curr_resync is assigned to ->curr_resync_completed and that value is directly visible through sysfs. So change the assignments to ->curr_resync_completed to get the same valued from elsewhere in a form that doesn't have the magic '1' or '2' values. Signed-off-by: NeilBrown --- drivers/md/bitmap.c | 2 +- drivers/md/md.c | 5 ++--- drivers/md/raid5.c | 4 ++-- 3 files changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 6cf587196b99..9a35320fb59f 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1546,7 +1546,7 @@ void bitmap_cond_end_sync(struct bitmap *bitmap, sector_t sector) wait_event(bitmap->mddev->recovery_wait, atomic_read(&bitmap->mddev->recovery_active) == 0); - bitmap->mddev->curr_resync_completed = bitmap->mddev->curr_resync; + bitmap->mddev->curr_resync_completed = sector; set_bit(MD_CHANGE_CLEAN, &bitmap->mddev->flags); sector &= ~((1ULL << CHUNK_BLOCK_SHIFT(bitmap)) - 1); s = 0; diff --git a/drivers/md/md.c b/drivers/md/md.c index b98a85fd10b6..42b1d9ead7f2 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6824,7 +6824,7 @@ void md_do_sync(mddev_t *mddev) desc, mdname(mddev)); mddev->curr_resync = j; } - mddev->curr_resync_completed = mddev->curr_resync; + mddev->curr_resync_completed = j; while (j < max_sectors) { sector_t sectors; @@ -6842,8 +6842,7 @@ void md_do_sync(mddev_t *mddev) md_unplug(mddev); wait_event(mddev->recovery_wait, atomic_read(&mddev->recovery_active) == 0); - mddev->curr_resync_completed = - mddev->curr_resync; + mddev->curr_resync_completed = j; set_bit(MD_CHANGE_CLEAN, &mddev->flags); sysfs_notify(&mddev->kobj, NULL, "sync_completed"); } diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 9212c077095c..d223a6c0ccc4 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4236,7 +4236,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped wait_event(conf->wait_for_overlap, atomic_read(&conf->reshape_stripes)==0); mddev->reshape_position = conf->reshape_progress; - mddev->curr_resync_completed = mddev->curr_resync; + mddev->curr_resync_completed = sector_nr; conf->reshape_checkpoint = jiffies; set_bit(MD_CHANGE_DEVS, &mddev->flags); md_wakeup_thread(mddev->thread); @@ -4337,7 +4337,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped wait_event(conf->wait_for_overlap, atomic_read(&conf->reshape_stripes) == 0); mddev->reshape_position = conf->reshape_progress; - mddev->curr_resync_completed = mddev->curr_resync + reshape_sectors; + mddev->curr_resync_completed = sector_nr; conf->reshape_checkpoint = jiffies; set_bit(MD_CHANGE_DEVS, &mddev->flags); md_wakeup_thread(mddev->thread); -- cgit v1.2.1 From 23ddff3792f61193695114c68d6ebd57e974c4f8 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 14 Jan 2011 09:14:34 +1100 Subject: md: allow suspend_lo and suspend_hi to decrease as well as increase. The sysfs attributes 'suspend_lo' and 'suspend_hi' describe a region to which read/writes are suspended so that the under lying data can be manipulated without user-space noticing. Currently the window they describe can only move forwards along the device. However this is an unnecessary restriction which will cause problems with planned developments. So relax this restriction and allow these endpoints to move arbitrarily. Signed-off-by: NeilBrown --- drivers/md/md.c | 33 +++++++++++++++++++++------------ 1 file changed, 21 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 42b1d9ead7f2..dd64ad30a0fe 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4016,19 +4016,24 @@ suspend_lo_store(mddev_t *mddev, const char *buf, size_t len) { char *e; unsigned long long new = simple_strtoull(buf, &e, 10); + unsigned long long old = mddev->suspend_lo; if (mddev->pers == NULL || mddev->pers->quiesce == NULL) return -EINVAL; if (buf == e || (*e && *e != '\n')) return -EINVAL; - if (new >= mddev->suspend_hi || - (new > mddev->suspend_lo && new < mddev->suspend_hi)) { - mddev->suspend_lo = new; + + mddev->suspend_lo = new; + if (new >= old) + /* Shrinking suspended region */ mddev->pers->quiesce(mddev, 2); - return len; - } else - return -EINVAL; + else { + /* Expanding suspended region - need to wait */ + mddev->pers->quiesce(mddev, 1); + mddev->pers->quiesce(mddev, 0); + } + return len; } static struct md_sysfs_entry md_suspend_lo = __ATTR(suspend_lo, S_IRUGO|S_IWUSR, suspend_lo_show, suspend_lo_store); @@ -4045,20 +4050,24 @@ suspend_hi_store(mddev_t *mddev, const char *buf, size_t len) { char *e; unsigned long long new = simple_strtoull(buf, &e, 10); + unsigned long long old = mddev->suspend_hi; if (mddev->pers == NULL || mddev->pers->quiesce == NULL) return -EINVAL; if (buf == e || (*e && *e != '\n')) return -EINVAL; - if ((new <= mddev->suspend_lo && mddev->suspend_lo >= mddev->suspend_hi) || - (new > mddev->suspend_lo && new > mddev->suspend_hi)) { - mddev->suspend_hi = new; + + mddev->suspend_hi = new; + if (new <= old) + /* Shrinking suspended region */ + mddev->pers->quiesce(mddev, 2); + else { + /* Expanding suspended region - need to wait */ mddev->pers->quiesce(mddev, 1); mddev->pers->quiesce(mddev, 0); - return len; - } else - return -EINVAL; + } + return len; } static struct md_sysfs_entry md_suspend_hi = __ATTR(suspend_hi, S_IRUGO|S_IWUSR, suspend_hi_show, suspend_hi_store); -- cgit v1.2.1 From 13ae864bc86ff65547ffe7e966b6433a0d0edb8a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?R=C3=A9mi=20R=C3=A9rolle?= Date: Fri, 14 Jan 2011 09:14:34 +1100 Subject: md: fix sync_completed reporting for very large drives (>2TB) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The values exported in the sync_completed file are unsigned long, which overflows with very large drives, resulting in wrong values reported. Since sync_completed uses sectors as unit, we'll start getting wrong values with components larger than 2TB. This patch simply replaces the use of unsigned long by unsigned long long. Signed-off-by: Rémi Rérolle Signed-off-by: NeilBrown --- drivers/md/md.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index dd64ad30a0fe..5e3714fecee9 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3918,7 +3918,7 @@ static struct md_sysfs_entry md_sync_speed = __ATTR_RO(sync_speed); static ssize_t sync_completed_show(mddev_t *mddev, char *page) { - unsigned long max_sectors, resync; + unsigned long long max_sectors, resync; if (!test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) return sprintf(page, "none\n"); @@ -3929,7 +3929,7 @@ sync_completed_show(mddev_t *mddev, char *page) max_sectors = mddev->dev_sectors; resync = mddev->curr_resync_completed; - return sprintf(page, "%lu / %lu\n", resync, max_sectors); + return sprintf(page, "%llu / %llu\n", resync, max_sectors); } static struct md_sysfs_entry md_sync_completed = __ATTR_RO(sync_completed); -- cgit v1.2.1 From 1a940fcee31ec6c18c2f24dbdad31d54e4c35048 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 14 Jan 2011 09:14:34 +1100 Subject: md/raid5: handle manually-added spares in start_reshape. It is possible to manually add spares to specific slots before starting a reshape. raid5_start_reshape should recognised this possibility and include it in the accounting. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index d223a6c0ccc4..5044babfcda0 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5527,8 +5527,8 @@ static int raid5_start_reshape(mddev_t *mddev) return -ENOSPC; list_for_each_entry(rdev, &mddev->disks, same_set) - if (rdev->raid_disk < 0 && - !test_bit(Faulty, &rdev->flags)) + if ((rdev->raid_disk < 0 || rdev->raid_disk >= conf->raid_disks) + && !test_bit(Faulty, &rdev->flags)) spares++; if (spares - mddev->degraded < mddev->delta_disks - conf->max_degraded) @@ -5588,6 +5588,11 @@ static int raid5_start_reshape(mddev_t *mddev) /* Failure here is OK */; } else break; + } else if (rdev->raid_disk >= conf->previous_raid_disks + && !test_bit(Faulty, &rdev->flags)) { + /* This is a spare that was manually added */ + set_bit(In_sync, &rdev->flags); + added_devices++; } /* When a reshape changes the number of devices, ->degraded -- cgit v1.2.1 From ba1b41b6b4e30cb66ae2775faadea05cae3ce61c Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 14 Jan 2011 09:14:34 +1100 Subject: md: range check slot number when manually adding a spare. When adding a spare to an active array, we should check the slot number, but allow it to be larger than raid_disks if a reshape is being prepared. Apply the same test when adding a device to an array-under-construction. It already had most of the test in place, but not quite all. Signed-off-by: NeilBrown --- drivers/md/md.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 5e3714fecee9..665851308818 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2479,6 +2479,10 @@ slot_store(mdk_rdev_t *rdev, const char *buf, size_t len) if (rdev2->raid_disk == slot) return -EEXIST; + if (slot >= rdev->mddev->raid_disks && + slot >= rdev->mddev->raid_disks + rdev->mddev->delta_disks) + return -ENOSPC; + rdev->raid_disk = slot; if (test_bit(In_sync, &rdev->flags)) rdev->saved_raid_disk = slot; @@ -2496,7 +2500,8 @@ slot_store(mdk_rdev_t *rdev, const char *buf, size_t len) /* failure here is OK */; /* don't wakeup anyone, leave that to userspace. */ } else { - if (slot >= rdev->mddev->raid_disks) + if (slot >= rdev->mddev->raid_disks && + slot >= rdev->mddev->raid_disks + rdev->mddev->delta_disks) return -ENOSPC; rdev->raid_disk = slot; /* assume it is working */ -- cgit v1.2.1 From bf2cb0dab8c97f00a71875d9b13dbac17a2f47ca Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 14 Jan 2011 09:14:34 +1100 Subject: md: Fix removal of extra drives when converting RAID6 to RAID5 When a RAID6 is converted to a RAID5, the extra drive should be discarded. However it isn't due to a typo in a comparison. This bug was introduced in commit e93f68a1fc6 in 2.6.35-rc4 and is suitable for any -stable since than. As the extra drive is not removed, the 'degraded' counter is wrong and so the RAID5 will not respond correctly to a subsequent failure. Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/md.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 665851308818..3194a80f3620 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3126,7 +3126,7 @@ level_store(mddev_t *mddev, const char *buf, size_t len) char nm[20]; if (rdev->raid_disk < 0) continue; - if (rdev->new_raid_disk > mddev->raid_disks) + if (rdev->new_raid_disk >= mddev->raid_disks) rdev->new_raid_disk = -1; if (rdev->new_raid_disk == rdev->raid_disk) continue; -- cgit v1.2.1 From 5dfbd1d734ef5415bc47b034df7433ba21e40e7b Mon Sep 17 00:00:00 2001 From: Claudio Scordino Date: Thu, 13 Jan 2011 15:45:39 -0800 Subject: atmel_serial: fix RTS high after initialization in RS485 mode When working in RS485 mode, the atmel_serial driver keeps RTS high after the initialization of the serial port. It goes low only after the first character has been sent. [akpm@linux-foundation.org: simplify code] Signed-off-by: Claudio Scordino Signed-off-by: Arkadiusz Bubala Tested-by: Arkadiusz Bubala Cc: Nicolas Ferre Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/atmel_serial.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 3892666b5fbd..2a1d52fb4936 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1732,6 +1732,11 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev) device_init_wakeup(&pdev->dev, 1); platform_set_drvdata(pdev, port); + if (port->rs485.flags & SER_RS485_ENABLED) { + UART_PUT_MR(&port->uart, ATMEL_US_USMODE_NORMAL); + UART_PUT_CR(&port->uart, ATMEL_US_RTSEN); + } + return 0; err_add_port: -- cgit v1.2.1 From 05b258e99725112c4febeab4fad23ea2c8908a3a Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 13 Jan 2011 15:47:14 -0800 Subject: thp: transparent hugepage sysfs meminfo Add hugepage statistics to per-node sysfs meminfo Reviewed-by: Rik van Riel Signed-off-by: David Rientjes Signed-off-by: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/base/node.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/base/node.c b/drivers/base/node.c index ce012a9c6201..36b43052001d 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -117,12 +117,21 @@ static ssize_t node_read_meminfo(struct sys_device * dev, "Node %d WritebackTmp: %8lu kB\n" "Node %d Slab: %8lu kB\n" "Node %d SReclaimable: %8lu kB\n" - "Node %d SUnreclaim: %8lu kB\n", + "Node %d SUnreclaim: %8lu kB\n" +#ifdef CONFIG_TRANSPARENT_HUGEPAGE + "Node %d AnonHugePages: %8lu kB\n" +#endif + , nid, K(node_page_state(nid, NR_FILE_DIRTY)), nid, K(node_page_state(nid, NR_WRITEBACK)), nid, K(node_page_state(nid, NR_FILE_PAGES)), nid, K(node_page_state(nid, NR_FILE_MAPPED)), - nid, K(node_page_state(nid, NR_ANON_PAGES)), + nid, K(node_page_state(nid, NR_ANON_PAGES) +#ifdef CONFIG_TRANSPARENT_HUGEPAGE + + node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) * + HPAGE_PMD_NR +#endif + ), nid, K(node_page_state(nid, NR_SHMEM)), nid, node_page_state(nid, NR_KERNEL_STACK) * THREAD_SIZE / 1024, @@ -133,7 +142,13 @@ static ssize_t node_read_meminfo(struct sys_device * dev, nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE) + node_page_state(nid, NR_SLAB_UNRECLAIMABLE)), nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE)), - nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))); + nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE)) +#ifdef CONFIG_TRANSPARENT_HUGEPAGE + , nid, + K(node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) * + HPAGE_PMD_NR) +#endif + ); n += hugetlb_report_node_meminfo(nid, buf + n); return n; } -- cgit v1.2.1 From 1ac9ad1394fa542ac7ae0dc943ee3cda678799fa Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 12 Jan 2011 12:13:14 +0000 Subject: net: remove dev_txq_stats_fold() After recent changes, (percpu stats on vlan/tunnels...), we dont need anymore per struct netdev_queue tx_bytes/tx_packets/tx_dropped counters. Only remaining users are ixgbe, sch_teql, gianfar & macvlan : 1) ixgbe can be converted to use existing tx_ring counters. 2) macvlan incremented txq->tx_dropped, it can use the dev->stats.tx_dropped counter. 3) sch_teql : almost revert ab35cd4b8f42 (Use net_device internal stats) Now we have ndo_get_stats64(), use it, even for "unsigned long" fields (No need to bring back a struct net_device_stats) 4) gianfar adds a stats structure per tx queue to hold tx_bytes/tx_packets This removes a lockdep warning (and possible lockup) in rndis gadget, calling dev_get_stats() from hard IRQ context. Ref: http://www.spinics.net/lists/netdev/msg149202.html Reported-by: Neil Jones Signed-off-by: Eric Dumazet CC: Jarek Poplawski CC: Alexander Duyck CC: Jeff Kirsher CC: Sandeep Gopalpet CC: Michal Nazarewicz Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 10 ++++------ drivers/net/gianfar.h | 10 ++++++++++ drivers/net/ixgbe/ixgbe_main.c | 23 ++++++++++++++++------- drivers/net/macvtap.c | 2 +- 4 files changed, 31 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 45c4b7bfcf39..f1d4b450e797 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -433,7 +433,6 @@ static void gfar_init_mac(struct net_device *ndev) static struct net_device_stats *gfar_get_stats(struct net_device *dev) { struct gfar_private *priv = netdev_priv(dev); - struct netdev_queue *txq; unsigned long rx_packets = 0, rx_bytes = 0, rx_dropped = 0; unsigned long tx_packets = 0, tx_bytes = 0; int i = 0; @@ -449,9 +448,8 @@ static struct net_device_stats *gfar_get_stats(struct net_device *dev) dev->stats.rx_dropped = rx_dropped; for (i = 0; i < priv->num_tx_queues; i++) { - txq = netdev_get_tx_queue(dev, i); - tx_bytes += txq->tx_bytes; - tx_packets += txq->tx_packets; + tx_bytes += priv->tx_queue[i]->stats.tx_bytes; + tx_packets += priv->tx_queue[i]->stats.tx_packets; } dev->stats.tx_bytes = tx_bytes; @@ -2108,8 +2106,8 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) } /* Update transmit stats */ - txq->tx_bytes += skb->len; - txq->tx_packets ++; + tx_queue->stats.tx_bytes += skb->len; + tx_queue->stats.tx_packets++; txbdp = txbdp_start = tx_queue->cur_tx; lstatus = txbdp->lstatus; diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index 68984eb88ae0..54de4135e932 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -907,12 +907,21 @@ enum { MQ_MG_MODE }; +/* + * Per TX queue stats + */ +struct tx_q_stats { + unsigned long tx_packets; + unsigned long tx_bytes; +}; + /** * struct gfar_priv_tx_q - per tx queue structure * @txlock: per queue tx spin lock * @tx_skbuff:skb pointers * @skb_curtx: to be used skb pointer * @skb_dirtytx:the last used skb pointer + * @stats: bytes/packets stats * @qindex: index of this queue * @dev: back pointer to the dev structure * @grp: back pointer to the group to which this queue belongs @@ -934,6 +943,7 @@ struct gfar_priv_tx_q { struct txbd8 *tx_bd_base; struct txbd8 *cur_tx; struct txbd8 *dirty_tx; + struct tx_q_stats stats; struct net_device *dev; struct gfar_priv_grp *grp; u16 skb_curtx; diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index a060610a42db..602078b84892 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -6667,8 +6667,6 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct ixgbe_adapter *adapter, struct ixgbe_ring *tx_ring) { - struct net_device *netdev = tx_ring->netdev; - struct netdev_queue *txq; unsigned int first; unsigned int tx_flags = 0; u8 hdr_len = 0; @@ -6765,9 +6763,6 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, /* add the ATR filter if ATR is on */ if (test_bit(__IXGBE_TX_FDIR_INIT_DONE, &tx_ring->state)) ixgbe_atr(tx_ring, skb, tx_flags, protocol); - txq = netdev_get_tx_queue(netdev, tx_ring->queue_index); - txq->tx_bytes += skb->len; - txq->tx_packets++; ixgbe_tx_queue(tx_ring, tx_flags, count, skb->len, hdr_len); ixgbe_maybe_stop_tx(tx_ring, DESC_NEEDED); @@ -6925,8 +6920,6 @@ static struct rtnl_link_stats64 *ixgbe_get_stats64(struct net_device *netdev, struct ixgbe_adapter *adapter = netdev_priv(netdev); int i; - /* accurate rx/tx bytes/packets stats */ - dev_txq_stats_fold(netdev, stats); rcu_read_lock(); for (i = 0; i < adapter->num_rx_queues; i++) { struct ixgbe_ring *ring = ACCESS_ONCE(adapter->rx_ring[i]); @@ -6943,6 +6936,22 @@ static struct rtnl_link_stats64 *ixgbe_get_stats64(struct net_device *netdev, stats->rx_bytes += bytes; } } + + for (i = 0; i < adapter->num_tx_queues; i++) { + struct ixgbe_ring *ring = ACCESS_ONCE(adapter->tx_ring[i]); + u64 bytes, packets; + unsigned int start; + + if (ring) { + do { + start = u64_stats_fetch_begin_bh(&ring->syncp); + packets = ring->stats.packets; + bytes = ring->stats.bytes; + } while (u64_stats_fetch_retry_bh(&ring->syncp, start)); + stats->tx_packets += packets; + stats->tx_bytes += bytes; + } + } rcu_read_unlock(); /* following stats updated by ixgbe_watchdog_task() */ stats->multicast = netdev->stats.multicast; diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index 21845affea13..5933621ac3ff 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -585,7 +585,7 @@ err: rcu_read_lock_bh(); vlan = rcu_dereference(q->vlan); if (vlan) - netdev_get_tx_queue(vlan->dev, 0)->tx_dropped++; + vlan->dev->stats.tx_dropped++; rcu_read_unlock_bh(); return err; -- cgit v1.2.1 From f767b6df8a796f901b2bd595ae22234636be4124 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 12 Jan 2011 18:08:04 +0000 Subject: netdev: bfin_mac: Remove is_multicast_ether_addr use in netdev_for_each_mc_addr Remove code that has no effect. Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- drivers/net/bfin_mac.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index fe75e7a9742e..22abfb39d813 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -1284,19 +1284,12 @@ static void bfin_mac_multicast_hash(struct net_device *dev) { u32 emac_hashhi, emac_hashlo; struct netdev_hw_addr *ha; - char *addrs; u32 crc; emac_hashhi = emac_hashlo = 0; netdev_for_each_mc_addr(ha, dev) { - addrs = ha->addr; - - /* skip non-multicast addresses */ - if (!is_multicast_ether_addr(addrs)) - continue; - - crc = ether_crc(ETH_ALEN, addrs); + crc = ether_crc(ETH_ALEN, ha->addr); crc >>= 26; if (crc & 0x20) -- cgit v1.2.1 From e84f885ebfb43b1ebb1481ee8bb2018743f947e9 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 13 Jan 2011 10:25:20 +0000 Subject: vxge: Remember to release firmware after upgrading firmware Regardless of whether the firmware update being performed by vxge_fw_upgrade() is a success or not we must still remember to always release_firmware() before returning. Signed-off-by: Jesper Juhl Acked-by: Ram Vepa Signed-off-by: David S. Miller --- drivers/net/vxge/vxge-main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c index 1ac9b568f1b0..c81a6512c683 100644 --- a/drivers/net/vxge/vxge-main.c +++ b/drivers/net/vxge/vxge-main.c @@ -4120,6 +4120,7 @@ int vxge_fw_upgrade(struct vxgedev *vdev, char *fw_name, int override) "hotplug event.\n"); out: + release_firmware(fw); return ret; } -- cgit v1.2.1 From 9e56790ad31d72a5a44142af462d047c0c897b29 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 13 Jan 2011 11:40:11 +0000 Subject: USB CDC NCM: Don't deref NULL in cdc_ncm_rx_fixup() and don't use uninitialized variable. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit skb_clone() dynamically allocates memory and may fail. If it does it returns NULL. This means we'll dereference a NULL pointer in drivers/net/usb/cdc_ncm.c::cdc_ncm_rx_fixup(). As far as I can tell, the proper way to deal with this is simply to goto the error label. Furthermore gcc complains that 'skb' may be used uninitialized: drivers/net/usb/cdc_ncm.c: In function ‘cdc_ncm_rx_fixup’: drivers/net/usb/cdc_ncm.c:922:18: warning: ‘skb’ may be used uninitialized in this function and I believe it is right. On the line where we pr_debug("invalid frame detected (ignored)" ... we are using the local variable 'skb' but nothing has ever been assigned to that variable yet. I believe the correct fix for that is to use 'skb_in' instead. Signed-off-by: Jesper Juhl Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 593c104ab199..d776c4a8d3c1 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1021,13 +1021,15 @@ static int cdc_ncm_rx_fixup(struct usbnet *dev, struct sk_buff *skb_in) (temp > CDC_NCM_MAX_DATAGRAM_SIZE) || (temp < ETH_HLEN)) { pr_debug("invalid frame detected (ignored)" "offset[%u]=%u, length=%u, skb=%p\n", - x, offset, temp, skb); + x, offset, temp, skb_in); if (!x) goto error; break; } else { skb = skb_clone(skb_in, GFP_ATOMIC); + if (!skb) + goto error; skb->len = temp; skb->data = ((u8 *)skb_in->data) + offset; skb_set_tail_pointer(skb, temp); -- cgit v1.2.1 From c3d2a7309c95021f143c94a16ea9becc0c9b9d23 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 13 Jan 2011 07:50:14 +0000 Subject: ks8695net: Disable non-working ethtool operations Some ethtool operations can only be implemented for the WAN port, and not all such operations are allowed to return an error code such as -EOPNOTSUPP. Therefore, define two separate ethtool_ops structures for WAN and non-WAN ports; simplify and rename the WAN-only functions. This is completely untested as I don't have an ARM build environment. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/arm/ks8695net.c | 282 ++++++++++++++++---------------------------- 1 file changed, 99 insertions(+), 183 deletions(-) (limited to 'drivers') diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c index 54c6d849cf25..8820fcdca10b 100644 --- a/drivers/net/arm/ks8695net.c +++ b/drivers/net/arm/ks8695net.c @@ -854,12 +854,12 @@ ks8695_set_msglevel(struct net_device *ndev, u32 value) } /** - * ks8695_get_settings - Get device-specific settings. + * ks8695_wan_get_settings - Get device-specific settings. * @ndev: The network device to read settings from * @cmd: The ethtool structure to read into */ static int -ks8695_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd) +ks8695_wan_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd) { struct ks8695_priv *ksp = netdev_priv(ndev); u32 ctrl; @@ -870,69 +870,50 @@ ks8695_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd) SUPPORTED_TP | SUPPORTED_MII); cmd->transceiver = XCVR_INTERNAL; - /* Port specific extras */ - switch (ksp->dtype) { - case KS8695_DTYPE_HPNA: - cmd->phy_address = 0; - /* not supported for HPNA */ - cmd->autoneg = AUTONEG_DISABLE; + cmd->advertising = ADVERTISED_TP | ADVERTISED_MII; + cmd->port = PORT_MII; + cmd->supported |= (SUPPORTED_Autoneg | SUPPORTED_Pause); + cmd->phy_address = 0; - /* BUG: Erm, dtype hpna implies no phy regs */ - /* - ctrl = readl(KS8695_MISC_VA + KS8695_HMC); - cmd->speed = (ctrl & HMC_HSS) ? SPEED_100 : SPEED_10; - cmd->duplex = (ctrl & HMC_HDS) ? DUPLEX_FULL : DUPLEX_HALF; - */ - return -EOPNOTSUPP; - case KS8695_DTYPE_WAN: - cmd->advertising = ADVERTISED_TP | ADVERTISED_MII; - cmd->port = PORT_MII; - cmd->supported |= (SUPPORTED_Autoneg | SUPPORTED_Pause); - cmd->phy_address = 0; + ctrl = readl(ksp->phyiface_regs + KS8695_WMC); + if ((ctrl & WMC_WAND) == 0) { + /* auto-negotiation is enabled */ + cmd->advertising |= ADVERTISED_Autoneg; + if (ctrl & WMC_WANA100F) + cmd->advertising |= ADVERTISED_100baseT_Full; + if (ctrl & WMC_WANA100H) + cmd->advertising |= ADVERTISED_100baseT_Half; + if (ctrl & WMC_WANA10F) + cmd->advertising |= ADVERTISED_10baseT_Full; + if (ctrl & WMC_WANA10H) + cmd->advertising |= ADVERTISED_10baseT_Half; + if (ctrl & WMC_WANAP) + cmd->advertising |= ADVERTISED_Pause; + cmd->autoneg = AUTONEG_ENABLE; + + cmd->speed = (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10; + cmd->duplex = (ctrl & WMC_WDS) ? + DUPLEX_FULL : DUPLEX_HALF; + } else { + /* auto-negotiation is disabled */ + cmd->autoneg = AUTONEG_DISABLE; - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - if ((ctrl & WMC_WAND) == 0) { - /* auto-negotiation is enabled */ - cmd->advertising |= ADVERTISED_Autoneg; - if (ctrl & WMC_WANA100F) - cmd->advertising |= ADVERTISED_100baseT_Full; - if (ctrl & WMC_WANA100H) - cmd->advertising |= ADVERTISED_100baseT_Half; - if (ctrl & WMC_WANA10F) - cmd->advertising |= ADVERTISED_10baseT_Full; - if (ctrl & WMC_WANA10H) - cmd->advertising |= ADVERTISED_10baseT_Half; - if (ctrl & WMC_WANAP) - cmd->advertising |= ADVERTISED_Pause; - cmd->autoneg = AUTONEG_ENABLE; - - cmd->speed = (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10; - cmd->duplex = (ctrl & WMC_WDS) ? - DUPLEX_FULL : DUPLEX_HALF; - } else { - /* auto-negotiation is disabled */ - cmd->autoneg = AUTONEG_DISABLE; - - cmd->speed = (ctrl & WMC_WANF100) ? - SPEED_100 : SPEED_10; - cmd->duplex = (ctrl & WMC_WANFF) ? - DUPLEX_FULL : DUPLEX_HALF; - } - break; - case KS8695_DTYPE_LAN: - return -EOPNOTSUPP; + cmd->speed = (ctrl & WMC_WANF100) ? + SPEED_100 : SPEED_10; + cmd->duplex = (ctrl & WMC_WANFF) ? + DUPLEX_FULL : DUPLEX_HALF; } return 0; } /** - * ks8695_set_settings - Set device-specific settings. + * ks8695_wan_set_settings - Set device-specific settings. * @ndev: The network device to configure * @cmd: The settings to configure */ static int -ks8695_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd) +ks8695_wan_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd) { struct ks8695_priv *ksp = netdev_priv(ndev); u32 ctrl; @@ -956,171 +937,99 @@ ks8695_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd) ADVERTISED_100baseT_Full)) == 0) return -EINVAL; - switch (ksp->dtype) { - case KS8695_DTYPE_HPNA: - /* HPNA does not support auto-negotiation. */ - return -EINVAL; - case KS8695_DTYPE_WAN: - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - - ctrl &= ~(WMC_WAND | WMC_WANA100F | WMC_WANA100H | - WMC_WANA10F | WMC_WANA10H); - if (cmd->advertising & ADVERTISED_100baseT_Full) - ctrl |= WMC_WANA100F; - if (cmd->advertising & ADVERTISED_100baseT_Half) - ctrl |= WMC_WANA100H; - if (cmd->advertising & ADVERTISED_10baseT_Full) - ctrl |= WMC_WANA10F; - if (cmd->advertising & ADVERTISED_10baseT_Half) - ctrl |= WMC_WANA10H; - - /* force a re-negotiation */ - ctrl |= WMC_WANR; - writel(ctrl, ksp->phyiface_regs + KS8695_WMC); - break; - case KS8695_DTYPE_LAN: - return -EOPNOTSUPP; - } + ctrl = readl(ksp->phyiface_regs + KS8695_WMC); + ctrl &= ~(WMC_WAND | WMC_WANA100F | WMC_WANA100H | + WMC_WANA10F | WMC_WANA10H); + if (cmd->advertising & ADVERTISED_100baseT_Full) + ctrl |= WMC_WANA100F; + if (cmd->advertising & ADVERTISED_100baseT_Half) + ctrl |= WMC_WANA100H; + if (cmd->advertising & ADVERTISED_10baseT_Full) + ctrl |= WMC_WANA10F; + if (cmd->advertising & ADVERTISED_10baseT_Half) + ctrl |= WMC_WANA10H; + + /* force a re-negotiation */ + ctrl |= WMC_WANR; + writel(ctrl, ksp->phyiface_regs + KS8695_WMC); } else { - switch (ksp->dtype) { - case KS8695_DTYPE_HPNA: - /* BUG: dtype_hpna implies no phy registers */ - /* - ctrl = __raw_readl(KS8695_MISC_VA + KS8695_HMC); - - ctrl &= ~(HMC_HSS | HMC_HDS); - if (cmd->speed == SPEED_100) - ctrl |= HMC_HSS; - if (cmd->duplex == DUPLEX_FULL) - ctrl |= HMC_HDS; - - __raw_writel(ctrl, KS8695_MISC_VA + KS8695_HMC); - */ - return -EOPNOTSUPP; - case KS8695_DTYPE_WAN: - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - - /* disable auto-negotiation */ - ctrl |= WMC_WAND; - ctrl &= ~(WMC_WANF100 | WMC_WANFF); - - if (cmd->speed == SPEED_100) - ctrl |= WMC_WANF100; - if (cmd->duplex == DUPLEX_FULL) - ctrl |= WMC_WANFF; - - writel(ctrl, ksp->phyiface_regs + KS8695_WMC); - break; - case KS8695_DTYPE_LAN: - return -EOPNOTSUPP; - } + ctrl = readl(ksp->phyiface_regs + KS8695_WMC); + + /* disable auto-negotiation */ + ctrl |= WMC_WAND; + ctrl &= ~(WMC_WANF100 | WMC_WANFF); + + if (cmd->speed == SPEED_100) + ctrl |= WMC_WANF100; + if (cmd->duplex == DUPLEX_FULL) + ctrl |= WMC_WANFF; + + writel(ctrl, ksp->phyiface_regs + KS8695_WMC); } return 0; } /** - * ks8695_nwayreset - Restart the autonegotiation on the port. + * ks8695_wan_nwayreset - Restart the autonegotiation on the port. * @ndev: The network device to restart autoneotiation on */ static int -ks8695_nwayreset(struct net_device *ndev) +ks8695_wan_nwayreset(struct net_device *ndev) { struct ks8695_priv *ksp = netdev_priv(ndev); u32 ctrl; - switch (ksp->dtype) { - case KS8695_DTYPE_HPNA: - /* No phy means no autonegotiation on hpna */ - return -EINVAL; - case KS8695_DTYPE_WAN: - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); + ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - if ((ctrl & WMC_WAND) == 0) - writel(ctrl | WMC_WANR, - ksp->phyiface_regs + KS8695_WMC); - else - /* auto-negotiation not enabled */ - return -EINVAL; - break; - case KS8695_DTYPE_LAN: - return -EOPNOTSUPP; - } + if ((ctrl & WMC_WAND) == 0) + writel(ctrl | WMC_WANR, + ksp->phyiface_regs + KS8695_WMC); + else + /* auto-negotiation not enabled */ + return -EINVAL; return 0; } /** - * ks8695_get_link - Retrieve link status of network interface + * ks8695_wan_get_link - Retrieve link status of network interface * @ndev: The network interface to retrive the link status of. */ static u32 -ks8695_get_link(struct net_device *ndev) +ks8695_wan_get_link(struct net_device *ndev) { struct ks8695_priv *ksp = netdev_priv(ndev); u32 ctrl; - switch (ksp->dtype) { - case KS8695_DTYPE_HPNA: - /* HPNA always has link */ - return 1; - case KS8695_DTYPE_WAN: - /* WAN we can read the PHY for */ - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - return ctrl & WMC_WLS; - case KS8695_DTYPE_LAN: - return -EOPNOTSUPP; - } - return 0; + ctrl = readl(ksp->phyiface_regs + KS8695_WMC); + return ctrl & WMC_WLS; } /** - * ks8695_get_pause - Retrieve network pause/flow-control advertising + * ks8695_wan_get_pause - Retrieve network pause/flow-control advertising * @ndev: The device to retrieve settings from * @param: The structure to fill out with the information */ static void -ks8695_get_pause(struct net_device *ndev, struct ethtool_pauseparam *param) +ks8695_wan_get_pause(struct net_device *ndev, struct ethtool_pauseparam *param) { struct ks8695_priv *ksp = netdev_priv(ndev); u32 ctrl; - switch (ksp->dtype) { - case KS8695_DTYPE_HPNA: - /* No phy link on hpna to configure */ - return; - case KS8695_DTYPE_WAN: - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - - /* advertise Pause */ - param->autoneg = (ctrl & WMC_WANAP); + ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - /* current Rx Flow-control */ - ctrl = ks8695_readreg(ksp, KS8695_DRXC); - param->rx_pause = (ctrl & DRXC_RFCE); + /* advertise Pause */ + param->autoneg = (ctrl & WMC_WANAP); - /* current Tx Flow-control */ - ctrl = ks8695_readreg(ksp, KS8695_DTXC); - param->tx_pause = (ctrl & DTXC_TFCE); - break; - case KS8695_DTYPE_LAN: - /* The LAN's "phy" is a direct-attached switch */ - return; - } -} + /* current Rx Flow-control */ + ctrl = ks8695_readreg(ksp, KS8695_DRXC); + param->rx_pause = (ctrl & DRXC_RFCE); -/** - * ks8695_set_pause - Configure pause/flow-control - * @ndev: The device to configure - * @param: The pause parameters to set - * - * TODO: Implement this - */ -static int -ks8695_set_pause(struct net_device *ndev, struct ethtool_pauseparam *param) -{ - return -EOPNOTSUPP; + /* current Tx Flow-control */ + ctrl = ks8695_readreg(ksp, KS8695_DTXC); + param->tx_pause = (ctrl & DTXC_TFCE); } /** @@ -1140,12 +1049,17 @@ ks8695_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info) static const struct ethtool_ops ks8695_ethtool_ops = { .get_msglevel = ks8695_get_msglevel, .set_msglevel = ks8695_set_msglevel, - .get_settings = ks8695_get_settings, - .set_settings = ks8695_set_settings, - .nway_reset = ks8695_nwayreset, - .get_link = ks8695_get_link, - .get_pauseparam = ks8695_get_pause, - .set_pauseparam = ks8695_set_pause, + .get_drvinfo = ks8695_get_drvinfo, +}; + +static const struct ethtool_ops ks8695_wan_ethtool_ops = { + .get_msglevel = ks8695_get_msglevel, + .set_msglevel = ks8695_set_msglevel, + .get_settings = ks8695_wan_get_settings, + .set_settings = ks8695_wan_set_settings, + .nway_reset = ks8695_wan_nwayreset, + .get_link = ks8695_wan_get_link, + .get_pauseparam = ks8695_wan_get_pause, .get_drvinfo = ks8695_get_drvinfo, }; @@ -1541,7 +1455,6 @@ ks8695_probe(struct platform_device *pdev) /* driver system setup */ ndev->netdev_ops = &ks8695_netdev_ops; - SET_ETHTOOL_OPS(ndev, &ks8695_ethtool_ops); ndev->watchdog_timeo = msecs_to_jiffies(watchdog); netif_napi_add(ndev, &ksp->napi, ks8695_poll, NAPI_WEIGHT); @@ -1608,12 +1521,15 @@ ks8695_probe(struct platform_device *pdev) if (ksp->phyiface_regs && ksp->link_irq == -1) { ks8695_init_switch(ksp); ksp->dtype = KS8695_DTYPE_LAN; + SET_ETHTOOL_OPS(ndev, &ks8695_ethtool_ops); } else if (ksp->phyiface_regs && ksp->link_irq != -1) { ks8695_init_wan_phy(ksp); ksp->dtype = KS8695_DTYPE_WAN; + SET_ETHTOOL_OPS(ndev, &ks8695_wan_ethtool_ops); } else { /* No initialisation since HPNA does not have a PHY */ ksp->dtype = KS8695_DTYPE_HPNA; + SET_ETHTOOL_OPS(ndev, &ks8695_ethtool_ops); } /* And bring up the net_device with the net core */ -- cgit v1.2.1 From 5cd8a77df3e9916069787365a32918caa371fc16 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 13 Jan 2011 07:52:51 +0000 Subject: ks8695net: Use default implementation of ethtool_ops::get_link This is completely untested as I don't have an ARM build environment. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/arm/ks8695net.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c index 8820fcdca10b..62d6f88cbab5 100644 --- a/drivers/net/arm/ks8695net.c +++ b/drivers/net/arm/ks8695net.c @@ -993,20 +993,6 @@ ks8695_wan_nwayreset(struct net_device *ndev) return 0; } -/** - * ks8695_wan_get_link - Retrieve link status of network interface - * @ndev: The network interface to retrive the link status of. - */ -static u32 -ks8695_wan_get_link(struct net_device *ndev) -{ - struct ks8695_priv *ksp = netdev_priv(ndev); - u32 ctrl; - - ctrl = readl(ksp->phyiface_regs + KS8695_WMC); - return ctrl & WMC_WLS; -} - /** * ks8695_wan_get_pause - Retrieve network pause/flow-control advertising * @ndev: The device to retrieve settings from @@ -1058,7 +1044,7 @@ static const struct ethtool_ops ks8695_wan_ethtool_ops = { .get_settings = ks8695_wan_get_settings, .set_settings = ks8695_wan_set_settings, .nway_reset = ks8695_wan_nwayreset, - .get_link = ks8695_wan_get_link, + .get_link = ethtool_op_get_link, .get_pauseparam = ks8695_wan_get_pause, .get_drvinfo = ks8695_get_drvinfo, }; -- cgit v1.2.1 From d0f49157d1ce02671a450b566a12ff19baed6c19 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 12 Jan 2011 22:15:08 +0000 Subject: netdev: tilepro: Use is_unicast_ether_addr helper Use is_unicast_ether_addr from linux/etherdevice.h instead of custom macros. Signed-off-by: Tobias Klauser Signed-off-by: David S. Miller --- drivers/net/tile/tilepro.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tile/tilepro.c b/drivers/net/tile/tilepro.c index 0e6bac5ec65b..7cb301da7474 100644 --- a/drivers/net/tile/tilepro.c +++ b/drivers/net/tile/tilepro.c @@ -142,14 +142,6 @@ MODULE_AUTHOR("Tilera"); MODULE_LICENSE("GPL"); - -#define IS_MULTICAST(mac_addr) \ - (((u8 *)(mac_addr))[0] & 0x01) - -#define IS_BROADCAST(mac_addr) \ - (((u16 *)(mac_addr))[0] == 0xffff) - - /* * Queue of incoming packets for a specific cpu and device. * @@ -795,7 +787,7 @@ static bool tile_net_poll_aux(struct tile_net_cpu *info, int index) /* * FIXME: Implement HW multicast filter. */ - if (!IS_MULTICAST(buf) && !IS_BROADCAST(buf)) { + if (is_unicast_ether_addr(buf)) { /* Filter packets not for our address. */ const u8 *mine = dev->dev_addr; filter = compare_ether_addr(mine, buf); -- cgit v1.2.1 From f1e02ed109df5f99abf942b8ccc99960cb09dd38 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Thu, 13 Jan 2011 13:07:53 +0000 Subject: r8169: keep firmware in memory. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The firmware agent is not available during resume. Loading the firmware during open() (see eee3a96c6368f47df8df5bd4ed1843600652b337) is not enough. close() is run during resume through rtl8169_reset_task(), whence the mildly natural release of firmware in the driver removal method instead. It will help with http://bugs.debian.org/609538. It will not avoid the 60 seconds delay when: - there is no firmware - the driver is loaded and the device is not up before a suspend/resume Signed-off-by: Francois Romieu Tested-by: Jarek KamiÅ„ski Cc: Hayes Cc: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/r8169.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index bb8645ab247c..bde7d61f1930 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -554,6 +554,8 @@ struct rtl8169_private { struct mii_if_info mii; struct rtl8169_counters counters; u32 saved_wolopts; + + const struct firmware *fw; }; MODULE_AUTHOR("Realtek and the Linux r8169 crew "); @@ -1766,6 +1768,29 @@ rtl_phy_write_fw(struct rtl8169_private *tp, const struct firmware *fw) } } +static void rtl_release_firmware(struct rtl8169_private *tp) +{ + release_firmware(tp->fw); + tp->fw = NULL; +} + +static int rtl_apply_firmware(struct rtl8169_private *tp, const char *fw_name) +{ + const struct firmware **fw = &tp->fw; + int rc = !*fw; + + if (rc) { + rc = request_firmware(fw, fw_name, &tp->pci_dev->dev); + if (rc < 0) + goto out; + } + + /* TODO: release firmware once rtl_phy_write_fw signals failures. */ + rtl_phy_write_fw(tp, *fw); +out: + return rc; +} + static void rtl8169s_hw_phy_config(struct rtl8169_private *tp) { static const struct phy_reg phy_reg_init[] = { @@ -2139,7 +2164,6 @@ static void rtl8168d_1_hw_phy_config(struct rtl8169_private *tp) { 0x0d, 0xf880 } }; void __iomem *ioaddr = tp->mmio_addr; - const struct firmware *fw; rtl_writephy_batch(tp, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0)); @@ -2203,11 +2227,8 @@ static void rtl8168d_1_hw_phy_config(struct rtl8169_private *tp) rtl_writephy(tp, 0x1f, 0x0005); rtl_writephy(tp, 0x05, 0x001b); - if (rtl_readphy(tp, 0x06) == 0xbf00 && - request_firmware(&fw, FIRMWARE_8168D_1, &tp->pci_dev->dev) == 0) { - rtl_phy_write_fw(tp, fw); - release_firmware(fw); - } else { + if ((rtl_readphy(tp, 0x06) != 0xbf00) || + (rtl_apply_firmware(tp, FIRMWARE_8168D_1) < 0)) { netif_warn(tp, probe, tp->dev, "unable to apply firmware patch\n"); } @@ -2257,7 +2278,6 @@ static void rtl8168d_2_hw_phy_config(struct rtl8169_private *tp) { 0x0d, 0xf880 } }; void __iomem *ioaddr = tp->mmio_addr; - const struct firmware *fw; rtl_writephy_batch(tp, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0)); @@ -2312,11 +2332,8 @@ static void rtl8168d_2_hw_phy_config(struct rtl8169_private *tp) rtl_writephy(tp, 0x1f, 0x0005); rtl_writephy(tp, 0x05, 0x001b); - if (rtl_readphy(tp, 0x06) == 0xb300 && - request_firmware(&fw, FIRMWARE_8168D_2, &tp->pci_dev->dev) == 0) { - rtl_phy_write_fw(tp, fw); - release_firmware(fw); - } else { + if ((rtl_readphy(tp, 0x06) != 0xb300) || + (rtl_apply_firmware(tp, FIRMWARE_8168D_2) < 0)) { netif_warn(tp, probe, tp->dev, "unable to apply firmware patch\n"); } @@ -3200,6 +3217,8 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev) cancel_delayed_work_sync(&tp->task); + rtl_release_firmware(tp); + unregister_netdev(dev); if (pci_dev_run_wake(pdev)) -- cgit v1.2.1 From c289ef41431144a538b5fb5f94fc83c81b3020e2 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 16 Nov 2010 14:33:52 -0600 Subject: mmc: sdhci-of: fix build on non-powerpc platforms Explicitly include err.h, of_address.h and of_irq.h. Make use of machine_is() conditional on PPC. Signed-off-by: Rob Herring Signed-off-by: Grant Likely --- drivers/mmc/host/sdhci-of-core.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci-of-core.c b/drivers/mmc/host/sdhci-of-core.c index fa19d849a920..dd84124f4209 100644 --- a/drivers/mmc/host/sdhci-of-core.c +++ b/drivers/mmc/host/sdhci-of-core.c @@ -13,6 +13,7 @@ * your option) any later version. */ +#include #include #include #include @@ -20,8 +21,12 @@ #include #include #include +#include +#include #include +#ifdef CONFIG_PPC #include +#endif #include "sdhci-of.h" #include "sdhci.h" @@ -112,7 +117,11 @@ static bool __devinit sdhci_of_wp_inverted(struct device_node *np) return true; /* Old device trees don't have the wp-inverted property. */ +#ifdef CONFIG_PPC return machine_is(mpc837x_rdb) || machine_is(mpc837x_mds); +#else + return false; +#endif } static int __devinit sdhci_of_probe(struct platform_device *ofdev, -- cgit v1.2.1 From 5f35765d836befebdfabf745fdbf2e070c887fac Mon Sep 17 00:00:00 2001 From: Abhilash Kesavan Date: Wed, 12 Jan 2011 15:00:23 +0900 Subject: spi: Enable SPI driver for S5P6440 and S5P6450 This patch enables the existing S3C64XX series SPI driver for S5P64X0 and removed dependency on EXPERIMENTAL because we don't need it now. v3: Changed dependency of S3C64XX_DMA v2: Removed dependency on EXPERIMENTAL Signed-off-by: Abhilash Kesavan Signed-off-by: Sangbeom Kim Acked-by: Jassi Brar Signed-off-by: Kukjin Kim Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 879b2a974d64..13bfa9d48082 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -310,8 +310,8 @@ config SPI_S3C24XX_GPIO config SPI_S3C64XX tristate "Samsung S3C64XX series type SPI" - depends on ARCH_S3C64XX && EXPERIMENTAL - select S3C64XX_DMA + depends on (ARCH_S3C64XX || ARCH_S5P64X0) + select S3C64XX_DMA if ARCH_S3C64XX help SPI driver for Samsung S3C64XX and newer SoCs. -- cgit v1.2.1 From 1591192d3a17adeebd03be0ce5888b88bddfaf89 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 14 Jan 2011 09:46:38 +0000 Subject: drm/i915: Disable GPU semaphores on SandyBridge mobile Hopefully, this is a temporary measure whilst the root cause is understood. At the moment, we experience a hard hang whilst looping urbanterror that has been identified as a result of the use of semaphores, but so far only on SNB mobile. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32752 Tested-by: mengmeng.meng@intel.com Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 8db88e34ef7b..dcfdf4151b6d 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -772,7 +772,8 @@ i915_gem_execbuffer_sync_rings(struct drm_i915_gem_object *obj, if (from == NULL || to == from) return 0; - if (INTEL_INFO(obj->base.dev)->gen < 6) + /* XXX gpu semaphores are currently causing hard hangs on SNB mobile */ + if (INTEL_INFO(obj->base.dev)->gen < 6 || IS_MOBILE(obj->base.dev)) return i915_gem_object_wait_rendering(obj, true); idx = intel_ring_sync_index(from, to); -- cgit v1.2.1 From 4c11b8adbc48bd21885fbc671df2f8ac04a75473 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 13 Jan 2011 07:48:13 +0000 Subject: e1000: Avoid unhandled IRQ If hardware asserted an interrupt and driver is down, then there is nothing to do so return IRQ_HANDLED instead of IRQ_NONE. Returning IRQ_NONE in above situation causes screaming IRQ on virtual machines. CC: Andy Gospodarek Signed-off-by: Tushar Dave Signed-off-by: Jesse Brandeburg Tested-by: Signed-off-by: Jeff Kirsher --- drivers/net/e1000/e1000_main.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 4ff88a683f61..e332aee386f6 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3478,9 +3478,17 @@ static irqreturn_t e1000_intr(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 icr = er32(ICR); - if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags))) + if (unlikely((!icr))) return IRQ_NONE; /* Not our interrupt */ + /* + * we might have caused the interrupt, but the above + * read cleared it, and just in case the driver is + * down there is nothing to do so return handled + */ + if (unlikely(test_bit(__E1000_DOWN, &adapter->flags))) + return IRQ_HANDLED; + if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) { hw->get_link_status = 1; /* guard against interrupt when we're going down */ -- cgit v1.2.1 From 0d6057e48b9d2004024e97252da83dce0661b131 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 4 Jan 2011 01:16:44 +0000 Subject: e1000e: update Copyright for 2011 Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/e1000e/82571.c | 2 +- drivers/net/e1000e/Makefile | 2 +- drivers/net/e1000e/defines.h | 2 +- drivers/net/e1000e/e1000.h | 2 +- drivers/net/e1000e/es2lan.c | 2 +- drivers/net/e1000e/ethtool.c | 2 +- drivers/net/e1000e/hw.h | 2 +- drivers/net/e1000e/ich8lan.c | 2 +- drivers/net/e1000e/lib.c | 2 +- drivers/net/e1000e/netdev.c | 4 ++-- drivers/net/e1000e/param.c | 2 +- drivers/net/e1000e/phy.c | 2 +- 12 files changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index cb6c7b1c1fb8..003a717041c7 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/Makefile b/drivers/net/e1000e/Makefile index 360c91369f35..28519acacd2d 100644 --- a/drivers/net/e1000e/Makefile +++ b/drivers/net/e1000e/Makefile @@ -1,7 +1,7 @@ ################################################################################ # # Intel PRO/1000 Linux driver -# Copyright(c) 1999 - 2008 Intel Corporation. +# Copyright(c) 1999 - 2011 Intel Corporation. # # This program is free software; you can redistribute it and/or modify it # under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index 7245dc2e0b7c..13149983d07e 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 5255be753746..e610e1369053 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index e45a61c8930a..2fefa820302b 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index f8ed03dab9b1..fa08b6336cfb 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index e774380c7cec..efdbb28c92de 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 5328a2927731..b43fc7fb1ee4 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index ff2872153b21..1c98dfa7b461 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index fa5b60452547..04df74537a20 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -6193,7 +6193,7 @@ static int __init e1000_init_module(void) int ret; pr_info("Intel(R) PRO/1000 Network Driver - %s\n", e1000e_driver_version); - pr_info("Copyright (c) 1999 - 2010 Intel Corporation.\n"); + pr_info("Copyright(c) 1999 - 2011 Intel Corporation.\n"); ret = pci_register_driver(&e1000_driver); return ret; diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index a9612b0e4bca..d6f618d3359a 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index a640f1c369ae..eb6cbad598b8 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2010 Intel Corporation. + Copyright(c) 1999 - 2011 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, -- cgit v1.2.1 From af667a29dd3dfc0464f83bac30cc3c63fe5d0206 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 31 Dec 2010 06:10:01 +0000 Subject: e1000e: consistent use of Rx/Tx vs. RX/TX/rx/tx in comments/logs Some minor comment errors and whitespace issues discovered while looking into this are also addressed. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/e1000e/82571.c | 2 +- drivers/net/e1000e/hw.h | 2 +- drivers/net/e1000e/lib.c | 18 ++-- drivers/net/e1000e/netdev.c | 221 ++++++++++++++++++++++---------------------- drivers/net/e1000e/param.c | 4 +- drivers/net/e1000e/phy.c | 2 +- 6 files changed, 126 insertions(+), 123 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 003a717041c7..7bdec0b0c562 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1310,7 +1310,7 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) * apply workaround for hardware errata documented in errata * docs Fixes issue where some error prone or unreliable PCIe * completions are occurring, particularly with ASPM enabled. - * Without fix, issue can cause tx timeouts. + * Without fix, issue can cause Tx timeouts. */ reg = er32(GCR2); reg |= 1; diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index efdbb28c92de..bc0860a598c9 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -102,7 +102,7 @@ enum e1e_registers { E1000_RDTR = 0x02820, /* Rx Delay Timer - RW */ E1000_RXDCTL_BASE = 0x02828, /* Rx Descriptor Control - RW */ #define E1000_RXDCTL(_n) (E1000_RXDCTL_BASE + (_n << 8)) - E1000_RADV = 0x0282C, /* RX Interrupt Absolute Delay Timer - RW */ + E1000_RADV = 0x0282C, /* Rx Interrupt Absolute Delay Timer - RW */ /* Convenience macros * diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 1c98dfa7b461..68aa1749bf66 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -533,7 +533,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) mac->autoneg_failed = 1; return 0; } - e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n"); + e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n"); /* Disable auto-negotiation in the TXCW register */ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); @@ -556,7 +556,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) * and disable forced link in the Device Control register * in an attempt to auto-negotiate with our link partner. */ - e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n"); + e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n"); ew32(TXCW, mac->txcw); ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); @@ -598,7 +598,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) mac->autoneg_failed = 1; return 0; } - e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n"); + e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n"); /* Disable auto-negotiation in the TXCW register */ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); @@ -621,7 +621,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) * and disable forced link in the Device Control register * in an attempt to auto-negotiate with our link partner. */ - e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n"); + e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n"); ew32(TXCW, mac->txcw); ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); @@ -800,9 +800,9 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) * The possible values of the "fc" parameter are: * 0: Flow control is completely disabled * 1: Rx flow control is enabled (we can receive pause frames, - * but not send pause frames). + * but not send pause frames). * 2: Tx flow control is enabled (we can send pause frames but we - * do not support receiving pause frames). + * do not support receiving pause frames). * 3: Both Rx and Tx flow control (symmetric) are enabled. */ switch (hw->fc.current_mode) { @@ -1031,9 +1031,9 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw) * The possible values of the "fc" parameter are: * 0: Flow control is completely disabled * 1: Rx flow control is enabled (we can receive pause - * frames but not send pause frames). + * frames but not send pause frames). * 2: Tx flow control is enabled (we can send pause frames - * frames but we do not receive pause frames). + * frames but we do not receive pause frames). * 3: Both Rx and Tx flow control (symmetric) is enabled. * other: No other values should be possible at this point. */ @@ -1189,7 +1189,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) } else { hw->fc.current_mode = e1000_fc_rx_pause; e_dbg("Flow Control = " - "RX PAUSE frames only.\r\n"); + "Rx PAUSE frames only.\r\n"); } } /* diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 04df74537a20..1c18f26b0812 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -77,17 +77,17 @@ struct e1000_reg_info { char *name; }; -#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */ -#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */ -#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */ -#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */ -#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */ - -#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ -#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ -#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ -#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */ -#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */ +#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */ +#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */ +#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */ +#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */ +#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */ + +#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ +#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ +#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ +#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */ +#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */ static const struct e1000_reg_info e1000_reg_info_tbl[] = { @@ -99,7 +99,7 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = { /* Interrupt Registers */ {E1000_ICR, "ICR"}, - /* RX Registers */ + /* Rx Registers */ {E1000_RCTL, "RCTL"}, {E1000_RDLEN, "RDLEN"}, {E1000_RDH, "RDH"}, @@ -115,7 +115,7 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = { {E1000_RDFTS, "RDFTS"}, {E1000_RDFPC, "RDFPC"}, - /* TX Registers */ + /* Tx Registers */ {E1000_TCTL, "TCTL"}, {E1000_TDBAL, "TDBAL"}, {E1000_TDBAH, "TDBAH"}, @@ -160,7 +160,7 @@ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo) break; default: printk(KERN_INFO "%-15s %08x\n", - reginfo->name, __er32(hw, reginfo->ofs)); + reginfo->name, __er32(hw, reginfo->ofs)); return; } @@ -171,9 +171,8 @@ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo) printk(KERN_CONT "\n"); } - /* - * e1000e_dump - Print registers, tx-ring and rx-ring + * e1000e_dump - Print registers, Tx-ring and Rx-ring */ static void e1000e_dump(struct e1000_adapter *adapter) { @@ -182,12 +181,20 @@ static void e1000e_dump(struct e1000_adapter *adapter) struct e1000_reg_info *reginfo; struct e1000_ring *tx_ring = adapter->tx_ring; struct e1000_tx_desc *tx_desc; - struct my_u0 { u64 a; u64 b; } *u0; + struct my_u0 { + u64 a; + u64 b; + } *u0; struct e1000_buffer *buffer_info; struct e1000_ring *rx_ring = adapter->rx_ring; union e1000_rx_desc_packet_split *rx_desc_ps; struct e1000_rx_desc *rx_desc; - struct my_u1 { u64 a; u64 b; u64 c; u64 d; } *u1; + struct my_u1 { + u64 a; + u64 b; + u64 c; + u64 d; + } *u1; u32 staterr; int i = 0; @@ -198,12 +205,10 @@ static void e1000e_dump(struct e1000_adapter *adapter) if (netdev) { dev_info(&adapter->pdev->dev, "Net device Info\n"); printk(KERN_INFO "Device Name state " - "trans_start last_rx\n"); + "trans_start last_rx\n"); printk(KERN_INFO "%-15s %016lX %016lX %016lX\n", - netdev->name, - netdev->state, - netdev->trans_start, - netdev->last_rx); + netdev->name, netdev->state, netdev->trans_start, + netdev->last_rx); } /* Print Registers */ @@ -214,26 +219,26 @@ static void e1000e_dump(struct e1000_adapter *adapter) e1000_regdump(hw, reginfo); } - /* Print TX Ring Summary */ + /* Print Tx Ring Summary */ if (!netdev || !netif_running(netdev)) goto exit; - dev_info(&adapter->pdev->dev, "TX Rings Summary\n"); + dev_info(&adapter->pdev->dev, "Tx Ring Summary\n"); printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ]" - " leng ntw timestamp\n"); + " leng ntw timestamp\n"); buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean]; printk(KERN_INFO " %5d %5X %5X %016llX %04X %3X %016llX\n", - 0, tx_ring->next_to_use, tx_ring->next_to_clean, - (unsigned long long)buffer_info->dma, - buffer_info->length, - buffer_info->next_to_watch, - (unsigned long long)buffer_info->time_stamp); + 0, tx_ring->next_to_use, tx_ring->next_to_clean, + (unsigned long long)buffer_info->dma, + buffer_info->length, + buffer_info->next_to_watch, + (unsigned long long)buffer_info->time_stamp); - /* Print TX Rings */ + /* Print Tx Ring */ if (!netif_msg_tx_done(adapter)) goto rx_ring_summary; - dev_info(&adapter->pdev->dev, "TX Rings Dump\n"); + dev_info(&adapter->pdev->dev, "Tx Ring Dump\n"); /* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended) * @@ -263,22 +268,22 @@ static void e1000e_dump(struct e1000_adapter *adapter) * 63 48 47 40 39 36 35 32 31 24 23 20 19 0 */ printk(KERN_INFO "Tl[desc] [address 63:0 ] [SpeCssSCmCsLen]" - " [bi->dma ] leng ntw timestamp bi->skb " - "<-- Legacy format\n"); + " [bi->dma ] leng ntw timestamp bi->skb " + "<-- Legacy format\n"); printk(KERN_INFO "Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen]" - " [bi->dma ] leng ntw timestamp bi->skb " - "<-- Ext Context format\n"); + " [bi->dma ] leng ntw timestamp bi->skb " + "<-- Ext Context format\n"); printk(KERN_INFO "Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen]" - " [bi->dma ] leng ntw timestamp bi->skb " - "<-- Ext Data format\n"); + " [bi->dma ] leng ntw timestamp bi->skb " + "<-- Ext Data format\n"); for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; u0 = (struct my_u0 *)tx_desc; printk(KERN_INFO "T%c[0x%03X] %016llX %016llX %016llX " - "%04X %3X %016llX %p", - (!(le64_to_cpu(u0->b) & (1<<29)) ? 'l' : - ((le64_to_cpu(u0->b) & (1<<20)) ? 'd' : 'c')), i, + "%04X %3X %016llX %p", + (!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l' : + ((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')), i, (unsigned long long)le64_to_cpu(u0->a), (unsigned long long)le64_to_cpu(u0->b), (unsigned long long)buffer_info->dma, @@ -296,22 +301,22 @@ static void e1000e_dump(struct e1000_adapter *adapter) if (netif_msg_pktdata(adapter) && buffer_info->dma != 0) print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, - 16, 1, phys_to_virt(buffer_info->dma), - buffer_info->length, true); + 16, 1, phys_to_virt(buffer_info->dma), + buffer_info->length, true); } - /* Print RX Rings Summary */ + /* Print Rx Ring Summary */ rx_ring_summary: - dev_info(&adapter->pdev->dev, "RX Rings Summary\n"); + dev_info(&adapter->pdev->dev, "Rx Ring Summary\n"); printk(KERN_INFO "Queue [NTU] [NTC]\n"); printk(KERN_INFO " %5d %5X %5X\n", 0, - rx_ring->next_to_use, rx_ring->next_to_clean); + rx_ring->next_to_use, rx_ring->next_to_clean); - /* Print RX Rings */ + /* Print Rx Ring */ if (!netif_msg_rx_status(adapter)) goto exit; - dev_info(&adapter->pdev->dev, "RX Rings Dump\n"); + dev_info(&adapter->pdev->dev, "Rx Ring Dump\n"); switch (adapter->rx_ps_pages) { case 1: case 2: @@ -329,7 +334,7 @@ rx_ring_summary: * +-----------------------------------------------------+ */ printk(KERN_INFO "R [desc] [buffer 0 63:0 ] " - "[buffer 1 63:0 ] " + "[buffer 1 63:0 ] " "[buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma ] " "[bi->skb] <-- Ext Pkt Split format\n"); /* [Extended] Receive Descriptor (Write-Back) Format @@ -344,7 +349,7 @@ rx_ring_summary: * 63 48 47 32 31 20 19 0 */ printk(KERN_INFO "RWB[desc] [ck ipid mrqhsh] " - "[vl l0 ee es] " + "[vl l0 ee es] " "[ l3 l2 l1 hs] [reserved ] ---------------- " "[bi->skb] <-- Ext Rx Write-Back format\n"); for (i = 0; i < rx_ring->count; i++) { @@ -352,26 +357,26 @@ rx_ring_summary: rx_desc_ps = E1000_RX_DESC_PS(*rx_ring, i); u1 = (struct my_u1 *)rx_desc_ps; staterr = - le32_to_cpu(rx_desc_ps->wb.middle.status_error); + le32_to_cpu(rx_desc_ps->wb.middle.status_error); if (staterr & E1000_RXD_STAT_DD) { /* Descriptor Done */ printk(KERN_INFO "RWB[0x%03X] %016llX " - "%016llX %016llX %016llX " - "---------------- %p", i, - (unsigned long long)le64_to_cpu(u1->a), - (unsigned long long)le64_to_cpu(u1->b), - (unsigned long long)le64_to_cpu(u1->c), - (unsigned long long)le64_to_cpu(u1->d), - buffer_info->skb); + "%016llX %016llX %016llX " + "---------------- %p", i, + (unsigned long long)le64_to_cpu(u1->a), + (unsigned long long)le64_to_cpu(u1->b), + (unsigned long long)le64_to_cpu(u1->c), + (unsigned long long)le64_to_cpu(u1->d), + buffer_info->skb); } else { printk(KERN_INFO "R [0x%03X] %016llX " - "%016llX %016llX %016llX %016llX %p", i, - (unsigned long long)le64_to_cpu(u1->a), - (unsigned long long)le64_to_cpu(u1->b), - (unsigned long long)le64_to_cpu(u1->c), - (unsigned long long)le64_to_cpu(u1->d), - (unsigned long long)buffer_info->dma, - buffer_info->skb); + "%016llX %016llX %016llX %016llX %p", i, + (unsigned long long)le64_to_cpu(u1->a), + (unsigned long long)le64_to_cpu(u1->b), + (unsigned long long)le64_to_cpu(u1->c), + (unsigned long long)le64_to_cpu(u1->d), + (unsigned long long)buffer_info->dma, + buffer_info->skb); if (netif_msg_pktdata(adapter)) print_hex_dump(KERN_INFO, "", @@ -400,18 +405,18 @@ rx_ring_summary: * 63 48 47 40 39 32 31 16 15 0 */ printk(KERN_INFO "Rl[desc] [address 63:0 ] " - "[vl er S cks ln] [bi->dma ] [bi->skb] " - "<-- Legacy format\n"); + "[vl er S cks ln] [bi->dma ] [bi->skb] " + "<-- Legacy format\n"); for (i = 0; rx_ring->desc && (i < rx_ring->count); i++) { rx_desc = E1000_RX_DESC(*rx_ring, i); buffer_info = &rx_ring->buffer_info[i]; u0 = (struct my_u0 *)rx_desc; printk(KERN_INFO "Rl[0x%03X] %016llX %016llX " - "%016llX %p", i, - (unsigned long long)le64_to_cpu(u0->a), - (unsigned long long)le64_to_cpu(u0->b), - (unsigned long long)buffer_info->dma, - buffer_info->skb); + "%016llX %p", i, + (unsigned long long)le64_to_cpu(u0->a), + (unsigned long long)le64_to_cpu(u0->b), + (unsigned long long)buffer_info->dma, + buffer_info->skb); if (i == rx_ring->next_to_use) printk(KERN_CONT " NTU\n"); else if (i == rx_ring->next_to_clean) @@ -421,9 +426,10 @@ rx_ring_summary: if (netif_msg_pktdata(adapter)) print_hex_dump(KERN_INFO, "", - DUMP_PREFIX_ADDRESS, - 16, 1, phys_to_virt(buffer_info->dma), - adapter->rx_buffer_len, true); + DUMP_PREFIX_ADDRESS, + 16, 1, + phys_to_virt(buffer_info->dma), + adapter->rx_buffer_len, true); } } @@ -450,8 +456,7 @@ static int e1000_desc_unused(struct e1000_ring *ring) * @skb: pointer to sk_buff to be indicated to stack **/ static void e1000_receive_skb(struct e1000_adapter *adapter, - struct net_device *netdev, - struct sk_buff *skb, + struct net_device *netdev, struct sk_buff *skb, u8 status, __le16 vlan) { skb->protocol = eth_type_trans(skb, netdev); @@ -464,7 +469,7 @@ static void e1000_receive_skb(struct e1000_adapter *adapter, } /** - * e1000_rx_checksum - Receive Checksum Offload for 82543 + * e1000_rx_checksum - Receive Checksum Offload * @adapter: board private structure * @status_err: receive descriptor status and error fields * @csum: receive descriptor csum field @@ -548,7 +553,7 @@ map_skb: adapter->rx_buffer_len, DMA_FROM_DEVICE); if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { - dev_err(&pdev->dev, "RX DMA map failed\n"); + dev_err(&pdev->dev, "Rx DMA map failed\n"); adapter->rx_dma_failed++; break; } @@ -601,7 +606,8 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, ps_page = &buffer_info->ps_pages[j]; if (j >= adapter->rx_ps_pages) { /* all unused desc entries get hw null ptr */ - rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0); + rx_desc->read.buffer_addr[j + 1] = + ~cpu_to_le64(0); continue; } if (!ps_page->page) { @@ -617,7 +623,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, if (dma_mapping_error(&pdev->dev, ps_page->dma)) { dev_err(&adapter->pdev->dev, - "RX DMA page map failed\n"); + "Rx DMA page map failed\n"); adapter->rx_dma_failed++; goto no_buffers; } @@ -627,8 +633,8 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, * didn't change because each write-back * erases this info. */ - rx_desc->read.buffer_addr[j+1] = - cpu_to_le64(ps_page->dma); + rx_desc->read.buffer_addr[j + 1] = + cpu_to_le64(ps_page->dma); } skb = netdev_alloc_skb_ip_align(netdev, @@ -644,7 +650,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, adapter->rx_ps_bsize0, DMA_FROM_DEVICE); if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { - dev_err(&pdev->dev, "RX DMA map failed\n"); + dev_err(&pdev->dev, "Rx DMA map failed\n"); adapter->rx_dma_failed++; /* cleanup skb */ dev_kfree_skb_any(skb); @@ -662,7 +668,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, * such as IA-64). */ wmb(); - writel(i<<1, adapter->hw.hw_addr + rx_ring->tail); + writel(i << 1, adapter->hw.hw_addr + rx_ring->tail); } i++; @@ -1106,11 +1112,10 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, cleaned = 1; cleaned_count++; dma_unmap_single(&pdev->dev, buffer_info->dma, - adapter->rx_ps_bsize0, - DMA_FROM_DEVICE); + adapter->rx_ps_bsize0, DMA_FROM_DEVICE); buffer_info->dma = 0; - /* see !EOP comment in other rx routine */ + /* see !EOP comment in other Rx routine */ if (!(staterr & E1000_RXD_STAT_EOP)) adapter->flags2 |= FLAG2_IS_DISCARDING; @@ -2610,7 +2615,7 @@ static void e1000_init_manageability_pt(struct e1000_adapter *adapter) } /** - * e1000_configure_tx - Configure 8254x Transmit Unit after Reset + * e1000_configure_tx - Configure Transmit Unit after Reset * @adapter: board private structure * * Configure the Tx unit of the MAC after a reset. @@ -2663,7 +2668,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) * hthresh = 1 ==> prefetch when one or more available * pthresh = 0x1f ==> prefetch if internal cache 31 or less * BEWARE: this seems to work but should be considered first if - * there are tx hangs or other tx related bugs + * there are Tx hangs or other Tx related bugs */ txdctl |= E1000_TXDCTL_DMA_BURST_ENABLE; ew32(TXDCTL(0), txdctl); @@ -2877,7 +2882,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) if (adapter->rx_ps_pages) { /* this is a 32 byte descriptor */ rdlen = rx_ring->count * - sizeof(union e1000_rx_desc_packet_split); + sizeof(union e1000_rx_desc_packet_split); adapter->clean_rx = e1000_clean_rx_irq_ps; adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps; } else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) { @@ -2900,7 +2905,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) /* * set the writeback threshold (only takes effect if the RDTR * is set). set GRAN=1 and write back up to 0x4 worth, and - * enable prefetching of 0x20 rx descriptors + * enable prefetching of 0x20 Rx descriptors * granularity = 01 * wthresh = 04, * hthresh = 04, @@ -2981,12 +2986,10 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) * excessive C-state transition latencies result in * dropped transactions. */ - pm_qos_update_request( - &adapter->netdev->pm_qos_req, 55); + pm_qos_update_request(&adapter->netdev->pm_qos_req, 55); } else { - pm_qos_update_request( - &adapter->netdev->pm_qos_req, - PM_QOS_DEFAULT_VALUE); + pm_qos_update_request(&adapter->netdev->pm_qos_req, + PM_QOS_DEFAULT_VALUE); } } @@ -3152,7 +3155,7 @@ void e1000e_reset(struct e1000_adapter *adapter) /* lower 16 bits has Rx packet buffer allocation size in KB */ pba &= 0xffff; /* - * the Tx fifo also stores 16 bytes of information about the tx + * the Tx fifo also stores 16 bytes of information about the Tx * but don't include ethernet FCS because hardware appends it */ min_tx_space = (adapter->max_frame_size + @@ -3175,7 +3178,7 @@ void e1000e_reset(struct e1000_adapter *adapter) pba -= min_tx_space - tx_space; /* - * if short on Rx space, Rx wins and must trump tx + * if short on Rx space, Rx wins and must trump Tx * adjustment or use Early Receive if available */ if ((pba < min_rx_space) && @@ -4039,11 +4042,11 @@ static void e1000_print_link_info(struct e1000_adapter *adapter) adapter->netdev->name, adapter->link_speed, (adapter->link_duplex == FULL_DUPLEX) ? - "Full Duplex" : "Half Duplex", + "Full Duplex" : "Half Duplex", ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ? - "RX/TX" : - ((ctrl & E1000_CTRL_RFCE) ? "RX" : - ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" ))); + "Rx/Tx" : + ((ctrl & E1000_CTRL_RFCE) ? "Rx" : + ((ctrl & E1000_CTRL_TFCE) ? "Tx" : "None"))); } static bool e1000e_has_link(struct e1000_adapter *adapter) @@ -4338,7 +4341,7 @@ link_up: /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = 1; - /* flush partial descriptors to memory before detecting tx hang */ + /* flush partial descriptors to memory before detecting Tx hang */ if (adapter->flags2 & FLAG2_DMA_BURST) { ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD); @@ -4529,7 +4532,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter, buffer_info->next_to_watch = i; buffer_info->dma = dma_map_single(&pdev->dev, skb->data + offset, - size, DMA_TO_DEVICE); + size, DMA_TO_DEVICE); buffer_info->mapped_as_page = false; if (dma_mapping_error(&pdev->dev, buffer_info->dma)) goto dma_error; @@ -4576,7 +4579,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter, } } - segs = skb_shinfo(skb)->gso_segs ?: 1; + segs = skb_shinfo(skb)->gso_segs ? : 1; /* multiply data chunks by size of headers */ bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len; @@ -4588,13 +4591,13 @@ static int e1000_tx_map(struct e1000_adapter *adapter, return count; dma_error: - dev_err(&pdev->dev, "TX DMA map failed\n"); + dev_err(&pdev->dev, "Tx DMA map failed\n"); buffer_info->dma = 0; if (count) count--; while (count--) { - if (i==0) + if (i == 0) i += tx_ring->count; i--; buffer_info = &tx_ring->buffer_info[i]; diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index d6f618d3359a..4dd9b63273f6 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -62,10 +62,9 @@ MODULE_PARM_DESC(copybreak, module_param_array_named(X, X, int, &num_##X, 0); \ MODULE_PARM_DESC(X, desc); - /* * Transmit Interrupt Delay in units of 1.024 microseconds - * Tx interrupt delay needs to typically be set to something non zero + * Tx interrupt delay needs to typically be set to something non-zero * * Valid Range: 0-65535 */ @@ -112,6 +111,7 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); #define DEFAULT_ITR 3 #define MAX_ITR 100000 #define MIN_ITR 100 + /* IntMode (Interrupt Mode) * * Valid Range: 0 - 2 diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index eb6cbad598b8..326788eab2f7 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -640,7 +640,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - /* Enable CRS on TX. This must be set for half-duplex operation. */ + /* Enable CRS on Tx. This must be set for half-duplex operation. */ ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data); if (ret_val) goto out; -- cgit v1.2.1 From e0084aa9e0ce157a5f53d9d39657a00d24dc6a66 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sat, 30 Oct 2010 14:08:32 -0700 Subject: mfd: Update WARN uses Remove KERN_. Signed-off-by: Joe Perches Signed-off-by: Samuel Ortiz --- drivers/mfd/ezx-pcap.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c index c2b698d69a93..4f6742753c41 100644 --- a/drivers/mfd/ezx-pcap.c +++ b/drivers/mfd/ezx-pcap.c @@ -199,8 +199,7 @@ static void pcap_isr_work(struct work_struct *work) if (service & 1) { struct irq_desc *desc = irq_to_desc(irq); - if (WARN(!desc, KERN_WARNING - "Invalid PCAP IRQ %d\n", irq)) + if (WARN(!desc, "Invalid PCAP IRQ %d\n", irq)) break; if (desc->status & IRQ_DISABLED) @@ -282,7 +281,7 @@ static irqreturn_t pcap_adc_irq(int irq, void *_pcap) mutex_lock(&pcap->adc_mutex); req = pcap->adc_queue[pcap->adc_head]; - if (WARN(!req, KERN_WARNING "adc irq without pending request\n")) { + if (WARN(!req, "adc irq without pending request\n")) { mutex_unlock(&pcap->adc_mutex); return IRQ_HANDLED; } -- cgit v1.2.1 From f77401d4da8180211b5fb5b7903ec8d8b22762ab Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 10 Nov 2010 15:47:51 +0800 Subject: mfd: Include instead of As warned by checkpatch.pl, use #include instead of Signed-off-by: Axel Lin Acked-by: Ben Dooks Signed-off-by: Samuel Ortiz --- drivers/mfd/sm501.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index bc9275c12133..c24bed769fe7 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -26,7 +26,7 @@ #include #include -#include +#include struct sm501_device { struct list_head list; -- cgit v1.2.1 From 77b22897da093e80c40f03e8d83bf23e756b9fba Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 10 Nov 2010 15:49:41 +0800 Subject: mfd: Include instead of As warned by checkpatch.pl, use #include instead of . Signed-off-by: Axel Lin Signed-off-by: Samuel Ortiz --- drivers/mfd/tps65010.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c index 90187fe33e04..93d5fdf020c7 100644 --- a/drivers/mfd/tps65010.c +++ b/drivers/mfd/tps65010.c @@ -34,7 +34,7 @@ #include -#include +#include /*-------------------------------------------------------------------------*/ -- cgit v1.2.1 From e1b88eb0e08335d2f6c00b35b67b4ffc78fd46d6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 11 Nov 2010 16:47:50 +0100 Subject: mfd: Don't open-code mc13xxx_unlock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Samuel Ortiz --- drivers/mfd/mc13xxx-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c index a2ac2ed6d64c..b9fcaf0004da 100644 --- a/drivers/mfd/mc13xxx-core.c +++ b/drivers/mfd/mc13xxx-core.c @@ -749,7 +749,7 @@ static int mc13xxx_probe(struct spi_device *spi) if (ret) { err_mask: err_revision: - mutex_unlock(&mc13xxx->lock); + mc13xxx_unlock(mc13xxx); dev_set_drvdata(&spi->dev, NULL); kfree(mc13xxx); return ret; -- cgit v1.2.1 From f71e1afdd588ec60fd799b1e5a6f0b2e6cf9605e Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Fri, 26 Nov 2010 11:52:35 +0100 Subject: mfd: Add cs5535-mfd driver for AMD Geode's CS5535/CS5536 support Add an MFD driver to handle the ISA device on CS5535 and CS5536 southbridges. This ISA bridge is actually multiple devices: GPIOs, MFGPTs, etc. Signed-off-by: Andres Salomon Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 8 +++ drivers/mfd/Makefile | 1 + drivers/mfd/cs5535-mfd.c | 151 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 160 insertions(+) create mode 100644 drivers/mfd/cs5535-mfd.c (limited to 'drivers') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index da9d2971102e..b5e3e09f5637 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -537,6 +537,14 @@ config AB3550_CORE LEDs, vibrator, system power and temperature, power management and ALSA sound. +config MFD_CS5535 + tristate "Support for CS5535 and CS5536 southbridge core functions" + select MFD_CORE + depends on PCI + ---help--- + This is the core driver for CS5535/CS5536 MFD functions. This is + necessary for using the board's GPIO and MFGPT functionality. + config MFD_TIMBERDALE tristate "Support for the Timberdale FPGA" select MFD_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 848e7eac75aa..5f35de9386e3 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -82,3 +82,4 @@ obj-$(CONFIG_MFD_JZ4740_ADC) += jz4740-adc.o obj-$(CONFIG_MFD_TPS6586X) += tps6586x.o obj-$(CONFIG_MFD_VX855) += vx855.o obj-$(CONFIG_MFD_WL1273_CORE) += wl1273-core.o +obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o diff --git a/drivers/mfd/cs5535-mfd.c b/drivers/mfd/cs5535-mfd.c new file mode 100644 index 000000000000..b141ca7c777c --- /dev/null +++ b/drivers/mfd/cs5535-mfd.c @@ -0,0 +1,151 @@ +/* + * cs5535-mfd.c - core MFD driver for CS5535/CS5536 southbridges + * + * The CS5535 and CS5536 has an ISA bridge on the PCI bus that is + * used for accessing GPIOs, MFGPTs, ACPI, etc. Each subdevice has + * an IO range that's specified in a single BAR. The BAR order is + * hardcoded in the CS553x specifications. + * + * Copyright (c) 2010 Andres Salomon + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#define DRV_NAME "cs5535-mfd" + +enum cs5535_mfd_bars { + SMB_BAR = 0, + GPIO_BAR = 1, + MFGPT_BAR = 2, + PMS_BAR = 4, + ACPI_BAR = 5, + NR_BARS, +}; + +static __devinitdata struct resource cs5535_mfd_resources[NR_BARS]; + +static __devinitdata struct mfd_cell cs5535_mfd_cells[] = { + { + .id = SMB_BAR, + .name = "cs5535-smb", + .num_resources = 1, + .resources = &cs5535_mfd_resources[SMB_BAR], + }, + { + .id = GPIO_BAR, + .name = "cs5535-gpio", + .num_resources = 1, + .resources = &cs5535_mfd_resources[GPIO_BAR], + }, + { + .id = MFGPT_BAR, + .name = "cs5535-mfgpt", + .num_resources = 1, + .resources = &cs5535_mfd_resources[MFGPT_BAR], + }, + { + .id = PMS_BAR, + .name = "cs5535-pms", + .num_resources = 1, + .resources = &cs5535_mfd_resources[PMS_BAR], + }, + { + .id = ACPI_BAR, + .name = "cs5535-acpi", + .num_resources = 1, + .resources = &cs5535_mfd_resources[ACPI_BAR], + }, +}; + +static int __devinit cs5535_mfd_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int err, i; + + err = pci_enable_device(pdev); + if (err) + return err; + + /* fill in IO range for each cell; subdrivers handle the region */ + for (i = 0; i < ARRAY_SIZE(cs5535_mfd_cells); i++) { + int bar = cs5535_mfd_cells[i].id; + struct resource *r = &cs5535_mfd_resources[bar]; + + r->flags = IORESOURCE_IO; + r->start = pci_resource_start(pdev, bar); + r->end = pci_resource_end(pdev, bar); + + /* id is used for temporarily storing BAR; unset it now */ + cs5535_mfd_cells[i].id = 0; + } + + err = mfd_add_devices(&pdev->dev, -1, cs5535_mfd_cells, + ARRAY_SIZE(cs5535_mfd_cells), NULL, 0); + if (err) { + dev_err(&pdev->dev, "MFD add devices failed: %d\n", err); + goto err_disable; + } + + dev_info(&pdev->dev, "%d devices registered.\n", + ARRAY_SIZE(cs5535_mfd_cells)); + + return 0; + +err_disable: + pci_disable_device(pdev); + return err; +} + +static void __devexit cs5535_mfd_remove(struct pci_dev *pdev) +{ + mfd_remove_devices(&pdev->dev); + pci_disable_device(pdev); +} + +static struct pci_device_id cs5535_mfd_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, cs5535_mfd_pci_tbl); + +static struct pci_driver cs5535_mfd_drv = { + .name = DRV_NAME, + .id_table = cs5535_mfd_pci_tbl, + .probe = cs5535_mfd_probe, + .remove = __devexit_p(cs5535_mfd_remove), +}; + +static int __init cs5535_mfd_init(void) +{ + return pci_register_driver(&cs5535_mfd_drv); +} + +static void __exit cs5535_mfd_exit(void) +{ + pci_unregister_driver(&cs5535_mfd_drv); +} + +module_init(cs5535_mfd_init); +module_exit(cs5535_mfd_exit); + +MODULE_AUTHOR("Andres Salomon "); +MODULE_DESCRIPTION("MFD driver for CS5535/CS5536 southbridge's ISA PCI device"); +MODULE_LICENSE("GPL"); -- cgit v1.2.1 From 3f3d4310bdb083b9331239e1a1bb09e19f763115 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 12 Nov 2010 13:37:56 -0800 Subject: mfd: Use printf extension %pR for struct resource Using %pR standardizes the struct resource output. Signed-off-by: Joe Perches Signed-off-by: Samuel Ortiz --- drivers/mfd/sm501.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index c24bed769fe7..5de3a760ea1e 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -745,11 +745,8 @@ static int sm501_register_device(struct sm501_devdata *sm, int ret; for (ptr = 0; ptr < pdev->num_resources; ptr++) { - printk(KERN_DEBUG "%s[%d] flags %08lx: %08llx..%08llx\n", - pdev->name, ptr, - pdev->resource[ptr].flags, - (unsigned long long)pdev->resource[ptr].start, - (unsigned long long)pdev->resource[ptr].end); + printk(KERN_DEBUG "%s[%d] %pR\n", + pdev->name, ptr, &pdev->resource[ptr]); } ret = platform_device_register(pdev); -- cgit v1.2.1 From 798e6e321f807c46d81be1572118e031577ea9ab Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 24 Nov 2010 18:01:40 +0000 Subject: mfd: Simplify WM832x subdevice instantiation All the current WM832x devices have the same set of subdevices so can just use multiple case statements with a single body. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-core.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 76cadcf3b1fe..d1b2d534b991 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -1610,17 +1610,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) break; case WM8320: - ret = mfd_add_devices(wm831x->dev, -1, - wm8320_devs, ARRAY_SIZE(wm8320_devs), - NULL, 0); - break; - case WM8321: - ret = mfd_add_devices(wm831x->dev, -1, - wm8320_devs, ARRAY_SIZE(wm8320_devs), - NULL, 0); - break; - case WM8325: ret = mfd_add_devices(wm831x->dev, -1, wm8320_devs, ARRAY_SIZE(wm8320_devs), -- cgit v1.2.1 From 412dc11d3fd01f96fdf4a8cbfbc5584a17dab7c8 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 24 Nov 2010 18:01:41 +0000 Subject: mfd: Add WM8326 support The WM8326 is a high performance variant of the WM832x series with no software visible differences. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-core.c | 7 +++++++ drivers/mfd/wm831x-i2c.c | 1 + drivers/mfd/wm831x-spi.c | 18 ++++++++++++++++++ 3 files changed, 26 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index d1b2d534b991..3fe9a58fe6c7 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -1541,6 +1541,12 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) dev_info(wm831x->dev, "WM8325 revision %c\n", 'A' + rev); break; + case WM8326: + parent = WM8326; + wm831x->num_gpio = 12; + dev_info(wm831x->dev, "WM8326 revision %c\n", 'A' + rev); + break; + default: dev_err(wm831x->dev, "Unknown WM831x device %04x\n", ret); ret = -EINVAL; @@ -1612,6 +1618,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) case WM8320: case WM8321: case WM8325: + case WM8326: ret = mfd_add_devices(wm831x->dev, -1, wm8320_devs, ARRAY_SIZE(wm8320_devs), NULL, wm831x->irq_base); diff --git a/drivers/mfd/wm831x-i2c.c b/drivers/mfd/wm831x-i2c.c index 156b19859e81..38be5201c783 100644 --- a/drivers/mfd/wm831x-i2c.c +++ b/drivers/mfd/wm831x-i2c.c @@ -108,6 +108,7 @@ static const struct i2c_device_id wm831x_i2c_id[] = { { "wm8320", WM8320 }, { "wm8321", WM8321 }, { "wm8325", WM8325 }, + { "wm8326", WM8326 }, { } }; MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id); diff --git a/drivers/mfd/wm831x-spi.c b/drivers/mfd/wm831x-spi.c index 2789b151b0f9..0a8f772be88c 100644 --- a/drivers/mfd/wm831x-spi.c +++ b/drivers/mfd/wm831x-spi.c @@ -81,6 +81,8 @@ static int __devinit wm831x_spi_probe(struct spi_device *spi) type = WM8321; else if (strcmp(spi->modalias, "wm8325") == 0) type = WM8325; + else if (strcmp(spi->modalias, "wm8326") == 0) + type = WM8326; else { dev_err(&spi->dev, "Unknown device type\n"); return -EINVAL; @@ -184,6 +186,17 @@ static struct spi_driver wm8325_spi_driver = { .suspend = wm831x_spi_suspend, }; +static struct spi_driver wm8326_spi_driver = { + .driver = { + .name = "wm8326", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = wm831x_spi_probe, + .remove = __devexit_p(wm831x_spi_remove), + .suspend = wm831x_spi_suspend, +}; + static int __init wm831x_spi_init(void) { int ret; @@ -212,12 +225,17 @@ static int __init wm831x_spi_init(void) if (ret != 0) pr_err("Failed to register WM8325 SPI driver: %d\n", ret); + ret = spi_register_driver(&wm8326_spi_driver); + if (ret != 0) + pr_err("Failed to register WM8326 SPI driver: %d\n", ret); + return 0; } subsys_initcall(wm831x_spi_init); static void __exit wm831x_spi_exit(void) { + spi_unregister_driver(&wm8326_spi_driver); spi_unregister_driver(&wm8325_spi_driver); spi_unregister_driver(&wm8321_spi_driver); spi_unregister_driver(&wm8320_spi_driver); -- cgit v1.2.1 From ba81cd393348b504ecc80d5fc363857f49410d5e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 24 Nov 2010 18:01:42 +0000 Subject: mfd: Convert WM831x to new irq_ interrupt methods Kernel 2.6.37 adds new interrupt methods which take a struct irq_data rather than an irq number. Convert over to these as they will become mandatory in future. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-irq.c | 42 ++++++++++++++++++++++-------------------- 1 file changed, 22 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c index 294183b6260b..eae52726bf3e 100644 --- a/drivers/mfd/wm831x-irq.c +++ b/drivers/mfd/wm831x-irq.c @@ -345,16 +345,16 @@ static inline struct wm831x_irq_data *irq_to_wm831x_irq(struct wm831x *wm831x, return &wm831x_irqs[irq - wm831x->irq_base]; } -static void wm831x_irq_lock(unsigned int irq) +static void wm831x_irq_lock(struct irq_data *data) { - struct wm831x *wm831x = get_irq_chip_data(irq); + struct wm831x *wm831x = data->chip_data; mutex_lock(&wm831x->irq_lock); } -static void wm831x_irq_sync_unlock(unsigned int irq) +static void wm831x_irq_sync_unlock(struct irq_data *data) { - struct wm831x *wm831x = get_irq_chip_data(irq); + struct wm831x *wm831x = data->chip_data; int i; for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) { @@ -371,28 +371,30 @@ static void wm831x_irq_sync_unlock(unsigned int irq) mutex_unlock(&wm831x->irq_lock); } -static void wm831x_irq_unmask(unsigned int irq) +static void wm831x_irq_unmask(struct irq_data *data) { - struct wm831x *wm831x = get_irq_chip_data(irq); - struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x, irq); + struct wm831x *wm831x = data->chip_data; + struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x, + data->irq); wm831x->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask; } -static void wm831x_irq_mask(unsigned int irq) +static void wm831x_irq_mask(struct irq_data *data) { - struct wm831x *wm831x = get_irq_chip_data(irq); - struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x, irq); + struct wm831x *wm831x = data->chip_data; + struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x, + data->irq); wm831x->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask; } -static int wm831x_irq_set_type(unsigned int irq, unsigned int type) +static int wm831x_irq_set_type(struct irq_data *data, unsigned int type) { - struct wm831x *wm831x = get_irq_chip_data(irq); - int val; + struct wm831x *wm831x = data->chip_data; + int val, irq; - irq = irq - wm831x->irq_base; + irq = data->irq - wm831x->irq_base; if (irq < WM831X_IRQ_GPIO_1 || irq > WM831X_IRQ_GPIO_11) { /* Ignore internal-only IRQs */ @@ -421,12 +423,12 @@ static int wm831x_irq_set_type(unsigned int irq, unsigned int type) } static struct irq_chip wm831x_irq_chip = { - .name = "wm831x", - .bus_lock = wm831x_irq_lock, - .bus_sync_unlock = wm831x_irq_sync_unlock, - .mask = wm831x_irq_mask, - .unmask = wm831x_irq_unmask, - .set_type = wm831x_irq_set_type, + .name = "wm831x", + .irq_bus_lock = wm831x_irq_lock, + .irq_bus_sync_unlock = wm831x_irq_sync_unlock, + .irq_mask = wm831x_irq_mask, + .irq_unmask = wm831x_irq_unmask, + .irq_set_type = wm831x_irq_set_type, }; /* The processing of the primary interrupt occurs in a thread so that -- cgit v1.2.1 From fdcc475b968f4715ce7a214c061c97a95c77fd21 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 24 Nov 2010 18:01:43 +0000 Subject: mfd: Convert WM835x to new irq_ interrupt methods Kernel 2.6.37 adds new interrupt methods which take a struct irq_data rather than an irq number. Convert over to these as they will become mandatory in future. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-irq.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c index f56c9adf9493..ba966ae88dc3 100644 --- a/drivers/mfd/wm8350-irq.c +++ b/drivers/mfd/wm8350-irq.c @@ -417,16 +417,16 @@ static irqreturn_t wm8350_irq(int irq, void *irq_data) return IRQ_HANDLED; } -static void wm8350_irq_lock(unsigned int irq) +static void wm8350_irq_lock(struct irq_data *data) { - struct wm8350 *wm8350 = get_irq_chip_data(irq); + struct wm8350 *wm8350 = data->chip_data; mutex_lock(&wm8350->irq_lock); } -static void wm8350_irq_sync_unlock(unsigned int irq) +static void wm8350_irq_sync_unlock(struct irq_data *data) { - struct wm8350 *wm8350 = get_irq_chip_data(irq); + struct wm8350 *wm8350 = data->chip_data; int i; for (i = 0; i < ARRAY_SIZE(wm8350->irq_masks); i++) { @@ -442,28 +442,30 @@ static void wm8350_irq_sync_unlock(unsigned int irq) mutex_unlock(&wm8350->irq_lock); } -static void wm8350_irq_enable(unsigned int irq) +static void wm8350_irq_enable(struct irq_data *data) { - struct wm8350 *wm8350 = get_irq_chip_data(irq); - struct wm8350_irq_data *irq_data = irq_to_wm8350_irq(wm8350, irq); + struct wm8350 *wm8350 = data->chip_data; + struct wm8350_irq_data *irq_data = irq_to_wm8350_irq(wm8350, + data->irq); wm8350->irq_masks[irq_data->reg] &= ~irq_data->mask; } -static void wm8350_irq_disable(unsigned int irq) +static void wm8350_irq_disable(struct irq_data *data) { - struct wm8350 *wm8350 = get_irq_chip_data(irq); - struct wm8350_irq_data *irq_data = irq_to_wm8350_irq(wm8350, irq); + struct wm8350 *wm8350 = data->chip_data; + struct wm8350_irq_data *irq_data = irq_to_wm8350_irq(wm8350, + data->irq); wm8350->irq_masks[irq_data->reg] |= irq_data->mask; } static struct irq_chip wm8350_irq_chip = { - .name = "wm8350", - .bus_lock = wm8350_irq_lock, - .bus_sync_unlock = wm8350_irq_sync_unlock, - .disable = wm8350_irq_disable, - .enable = wm8350_irq_enable, + .name = "wm8350", + .irq_bus_lock = wm8350_irq_lock, + .irq_bus_sync_unlock = wm8350_irq_sync_unlock, + .irq_disable = wm8350_irq_disable, + .irq_enable = wm8350_irq_enable, }; int wm8350_irq_init(struct wm8350 *wm8350, int irq, -- cgit v1.2.1 From baa3f63b88c9138bb923a29a3d5fddc204d1f5e6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 24 Nov 2010 18:01:44 +0000 Subject: mfd: Convert WM8994 to new irq_ interrupt methods Kernel 2.6.37 adds new interrupt methods which take a struct irq_data rather than an irq number. Convert over to these as they will become mandatory in future. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8994-irq.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/wm8994-irq.c b/drivers/mfd/wm8994-irq.c index 8400eb1ee5db..62598840ad04 100644 --- a/drivers/mfd/wm8994-irq.c +++ b/drivers/mfd/wm8994-irq.c @@ -156,16 +156,16 @@ static inline struct wm8994_irq_data *irq_to_wm8994_irq(struct wm8994 *wm8994, return &wm8994_irqs[irq - wm8994->irq_base]; } -static void wm8994_irq_lock(unsigned int irq) +static void wm8994_irq_lock(struct irq_data *data) { - struct wm8994 *wm8994 = get_irq_chip_data(irq); + struct wm8994 *wm8994 = data->chip_data; mutex_lock(&wm8994->irq_lock); } -static void wm8994_irq_sync_unlock(unsigned int irq) +static void wm8994_irq_sync_unlock(struct irq_data *data) { - struct wm8994 *wm8994 = get_irq_chip_data(irq); + struct wm8994 *wm8994 = data->chip_data; int i; for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) { @@ -182,28 +182,30 @@ static void wm8994_irq_sync_unlock(unsigned int irq) mutex_unlock(&wm8994->irq_lock); } -static void wm8994_irq_unmask(unsigned int irq) +static void wm8994_irq_unmask(struct irq_data *data) { - struct wm8994 *wm8994 = get_irq_chip_data(irq); - struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994, irq); + struct wm8994 *wm8994 = data->chip_data; + struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994, + data->irq); wm8994->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask; } -static void wm8994_irq_mask(unsigned int irq) +static void wm8994_irq_mask(struct irq_data *data) { - struct wm8994 *wm8994 = get_irq_chip_data(irq); - struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994, irq); + struct wm8994 *wm8994 = data->chip_data; + struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994, + data->irq); wm8994->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask; } static struct irq_chip wm8994_irq_chip = { - .name = "wm8994", - .bus_lock = wm8994_irq_lock, - .bus_sync_unlock = wm8994_irq_sync_unlock, - .mask = wm8994_irq_mask, - .unmask = wm8994_irq_unmask, + .name = "wm8994", + .irq_bus_lock = wm8994_irq_lock, + .irq_bus_sync_unlock = wm8994_irq_sync_unlock, + .irq_mask = wm8994_irq_mask, + .irq_unmask = wm8994_irq_unmask, }; /* The processing of the primary interrupt occurs in a thread so that -- cgit v1.2.1 From d7b9f3220fd97522559316cdd72778f42ac4de04 Mon Sep 17 00:00:00 2001 From: Mattias Wallin Date: Fri, 26 Nov 2010 13:06:39 +0100 Subject: mfd: Fix ab8500-debug indentation errors Replace spaces with proper tabs. Signed-off-by: Mattias Wallin Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 1016 +++++++++++++++++++++--------------------- 1 file changed, 508 insertions(+), 508 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 8d1e05a39815..dfdc76e0b96e 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -24,9 +24,9 @@ static u32 debug_address; * @perm: access permissions for the range */ struct ab8500_reg_range { - u8 first; - u8 last; - u8 perm; + u8 first; + u8 last; + u8 perm; }; /** @@ -36,9 +36,9 @@ struct ab8500_reg_range { * @range: the list of register ranges */ struct ab8500_i2c_ranges { - u8 num_ranges; - u8 bankid; - const struct ab8500_reg_range *range; + u8 num_ranges; + u8 bankid; + const struct ab8500_reg_range *range; }; #define AB8500_NAME_STRING "ab8500" @@ -47,521 +47,521 @@ struct ab8500_i2c_ranges { #define AB8500_REV_REG 0x80 static struct ab8500_i2c_ranges debug_ranges[AB8500_NUM_BANKS] = { - [0x0] = { - .num_ranges = 0, - .range = 0, - }, - [AB8500_SYS_CTRL1_BLOCK] = { - .num_ranges = 3, - .range = (struct ab8500_reg_range[]) { - { - .first = 0x00, - .last = 0x02, - }, - { - .first = 0x42, - .last = 0x42, - }, - { - .first = 0x80, - .last = 0x81, - }, - }, - }, - [AB8500_SYS_CTRL2_BLOCK] = { - .num_ranges = 4, - .range = (struct ab8500_reg_range[]) { - { - .first = 0x00, - .last = 0x0D, - }, - { - .first = 0x0F, - .last = 0x17, - }, - { - .first = 0x30, - .last = 0x30, - }, - { - .first = 0x32, - .last = 0x33, - }, - }, - }, - [AB8500_REGU_CTRL1] = { - .num_ranges = 3, - .range = (struct ab8500_reg_range[]) { - { - .first = 0x00, - .last = 0x00, - }, - { - .first = 0x03, - .last = 0x10, - }, - { - .first = 0x80, - .last = 0x84, - }, - }, - }, - [AB8500_REGU_CTRL2] = { - .num_ranges = 5, - .range = (struct ab8500_reg_range[]) { - { - .first = 0x00, - .last = 0x15, - }, - { - .first = 0x17, - .last = 0x19, - }, - { - .first = 0x1B, - .last = 0x1D, - }, - { - .first = 0x1F, - .last = 0x22, - }, - { - .first = 0x40, - .last = 0x44, - }, - /* 0x80-0x8B is SIM registers and should - * not be accessed from here */ - }, - }, - [AB8500_USB] = { - .num_ranges = 2, - .range = (struct ab8500_reg_range[]) { - { - .first = 0x80, - .last = 0x83, - }, - { - .first = 0x87, - .last = 0x8A, - }, - }, - }, - [AB8500_TVOUT] = { - .num_ranges = 9, - .range = (struct ab8500_reg_range[]) { - { - .first = 0x00, - .last = 0x12, - }, - { - .first = 0x15, - .last = 0x17, - }, - { - .first = 0x19, - .last = 0x21, - }, - { - .first = 0x27, - .last = 0x2C, - }, - { - .first = 0x41, - .last = 0x41, - }, - { - .first = 0x45, - .last = 0x5B, - }, - { - .first = 0x5D, - .last = 0x5D, - }, - { - .first = 0x69, - .last = 0x69, - }, - { - .first = 0x80, - .last = 0x81, - }, - }, - }, - [AB8500_DBI] = { - .num_ranges = 0, - .range = 0, - }, - [AB8500_ECI_AV_ACC] = { - .num_ranges = 1, - .range = (struct ab8500_reg_range[]) { - { - .first = 0x80, - .last = 0x82, - }, - }, - }, - [0x9] = { - .num_ranges = 0, - .range = 0, - }, - [AB8500_GPADC] = { - .num_ranges = 1, - .range = (struct ab8500_reg_range[]) { - { - .first = 0x00, - .last = 0x08, - }, - }, - }, - [AB8500_CHARGER] = { - .num_ranges = 8, - .range = (struct ab8500_reg_range[]) { - { - .first = 0x00, - .last = 0x03, - }, - { - .first = 0x05, - .last = 0x05, - }, - { - .first = 0x40, - .last = 0x40, - }, - { - .first = 0x42, - .last = 0x42, - }, - { - .first = 0x44, - .last = 0x44, - }, - { - .first = 0x50, - .last = 0x55, - }, - { - .first = 0x80, - .last = 0x82, - }, - { - .first = 0xC0, - .last = 0xC2, - }, - }, - }, - [AB8500_GAS_GAUGE] = { - .num_ranges = 3, - .range = (struct ab8500_reg_range[]) { - { - .first = 0x00, - .last = 0x00, - }, - { - .first = 0x07, - .last = 0x0A, - }, - { - .first = 0x10, - .last = 0x14, - }, - }, - }, - [AB8500_AUDIO] = { - .num_ranges = 1, - .range = (struct ab8500_reg_range[]) { - { - .first = 0x00, - .last = 0x6F, - }, - }, - }, - [AB8500_INTERRUPT] = { - .num_ranges = 0, - .range = 0, - }, - [AB8500_RTC] = { - .num_ranges = 1, - .range = (struct ab8500_reg_range[]) { - { - .first = 0x00, - .last = 0x0F, - }, - }, - }, - [AB8500_MISC] = { - .num_ranges = 8, - .range = (struct ab8500_reg_range[]) { - { - .first = 0x00, - .last = 0x05, - }, - { - .first = 0x10, - .last = 0x15, - }, - { - .first = 0x20, - .last = 0x25, - }, - { - .first = 0x30, - .last = 0x35, - }, - { - .first = 0x40, - .last = 0x45, - }, - { - .first = 0x50, - .last = 0x50, - }, - { - .first = 0x60, - .last = 0x67, - }, - { - .first = 0x80, - .last = 0x80, - }, - }, - }, - [0x11] = { - .num_ranges = 0, - .range = 0, - }, - [0x12] = { - .num_ranges = 0, - .range = 0, - }, - [0x13] = { - .num_ranges = 0, - .range = 0, - }, - [0x14] = { - .num_ranges = 0, - .range = 0, - }, - [AB8500_OTP_EMUL] = { - .num_ranges = 1, - .range = (struct ab8500_reg_range[]) { - { - .first = 0x01, - .last = 0x0F, - }, - }, - }, + [0x0] = { + .num_ranges = 0, + .range = 0, + }, + [AB8500_SYS_CTRL1_BLOCK] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x02, + }, + { + .first = 0x42, + .last = 0x42, + }, + { + .first = 0x80, + .last = 0x81, + }, + }, + }, + [AB8500_SYS_CTRL2_BLOCK] = { + .num_ranges = 4, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x0D, + }, + { + .first = 0x0F, + .last = 0x17, + }, + { + .first = 0x30, + .last = 0x30, + }, + { + .first = 0x32, + .last = 0x33, + }, + }, + }, + [AB8500_REGU_CTRL1] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x00, + }, + { + .first = 0x03, + .last = 0x10, + }, + { + .first = 0x80, + .last = 0x84, + }, + }, + }, + [AB8500_REGU_CTRL2] = { + .num_ranges = 5, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x15, + }, + { + .first = 0x17, + .last = 0x19, + }, + { + .first = 0x1B, + .last = 0x1D, + }, + { + .first = 0x1F, + .last = 0x22, + }, + { + .first = 0x40, + .last = 0x44, + }, + /* 0x80-0x8B is SIM registers and should + * not be accessed from here */ + }, + }, + [AB8500_USB] = { + .num_ranges = 2, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x80, + .last = 0x83, + }, + { + .first = 0x87, + .last = 0x8A, + }, + }, + }, + [AB8500_TVOUT] = { + .num_ranges = 9, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x12, + }, + { + .first = 0x15, + .last = 0x17, + }, + { + .first = 0x19, + .last = 0x21, + }, + { + .first = 0x27, + .last = 0x2C, + }, + { + .first = 0x41, + .last = 0x41, + }, + { + .first = 0x45, + .last = 0x5B, + }, + { + .first = 0x5D, + .last = 0x5D, + }, + { + .first = 0x69, + .last = 0x69, + }, + { + .first = 0x80, + .last = 0x81, + }, + }, + }, + [AB8500_DBI] = { + .num_ranges = 0, + .range = 0, + }, + [AB8500_ECI_AV_ACC] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x80, + .last = 0x82, + }, + }, + }, + [0x9] = { + .num_ranges = 0, + .range = 0, + }, + [AB8500_GPADC] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x08, + }, + }, + }, + [AB8500_CHARGER] = { + .num_ranges = 8, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x03, + }, + { + .first = 0x05, + .last = 0x05, + }, + { + .first = 0x40, + .last = 0x40, + }, + { + .first = 0x42, + .last = 0x42, + }, + { + .first = 0x44, + .last = 0x44, + }, + { + .first = 0x50, + .last = 0x55, + }, + { + .first = 0x80, + .last = 0x82, + }, + { + .first = 0xC0, + .last = 0xC2, + }, + }, + }, + [AB8500_GAS_GAUGE] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x00, + }, + { + .first = 0x07, + .last = 0x0A, + }, + { + .first = 0x10, + .last = 0x14, + }, + }, + }, + [AB8500_AUDIO] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x6F, + }, + }, + }, + [AB8500_INTERRUPT] = { + .num_ranges = 0, + .range = 0, + }, + [AB8500_RTC] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x0F, + }, + }, + }, + [AB8500_MISC] = { + .num_ranges = 8, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x05, + }, + { + .first = 0x10, + .last = 0x15, + }, + { + .first = 0x20, + .last = 0x25, + }, + { + .first = 0x30, + .last = 0x35, + }, + { + .first = 0x40, + .last = 0x45, + }, + { + .first = 0x50, + .last = 0x50, + }, + { + .first = 0x60, + .last = 0x67, + }, + { + .first = 0x80, + .last = 0x80, + }, + }, + }, + [0x11] = { + .num_ranges = 0, + .range = 0, + }, + [0x12] = { + .num_ranges = 0, + .range = 0, + }, + [0x13] = { + .num_ranges = 0, + .range = 0, + }, + [0x14] = { + .num_ranges = 0, + .range = 0, + }, + [AB8500_OTP_EMUL] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x01, + .last = 0x0F, + }, + }, + }, }; static int ab8500_registers_print(struct seq_file *s, void *p) { - struct device *dev = s->private; - unsigned int i; - u32 bank = debug_bank; - - seq_printf(s, AB8500_NAME_STRING " register values:\n"); - - seq_printf(s, " bank %u:\n", bank); - for (i = 0; i < debug_ranges[bank].num_ranges; i++) { - u32 reg; - - for (reg = debug_ranges[bank].range[i].first; - reg <= debug_ranges[bank].range[i].last; - reg++) { - u8 value; - int err; - - err = abx500_get_register_interruptible(dev, - (u8)bank, (u8)reg, &value); - if (err < 0) { - dev_err(dev, "ab->read fail %d\n", err); - return err; - } - - err = seq_printf(s, " [%u/0x%02X]: 0x%02X\n", bank, - reg, value); - if (err < 0) { - dev_err(dev, "seq_printf overflow\n"); - /* Error is not returned here since - * the output is wanted in any case */ - return 0; - } - } - } - return 0; + struct device *dev = s->private; + unsigned int i; + u32 bank = debug_bank; + + seq_printf(s, AB8500_NAME_STRING " register values:\n"); + + seq_printf(s, " bank %u:\n", bank); + for (i = 0; i < debug_ranges[bank].num_ranges; i++) { + u32 reg; + + for (reg = debug_ranges[bank].range[i].first; + reg <= debug_ranges[bank].range[i].last; + reg++) { + u8 value; + int err; + + err = abx500_get_register_interruptible(dev, + (u8)bank, (u8)reg, &value); + if (err < 0) { + dev_err(dev, "ab->read fail %d\n", err); + return err; + } + + err = seq_printf(s, " [%u/0x%02X]: 0x%02X\n", bank, + reg, value); + if (err < 0) { + dev_err(dev, "seq_printf overflow\n"); + /* Error is not returned here since + * the output is wanted in any case */ + return 0; + } + } + } + return 0; } static int ab8500_registers_open(struct inode *inode, struct file *file) { - return single_open(file, ab8500_registers_print, inode->i_private); + return single_open(file, ab8500_registers_print, inode->i_private); } static const struct file_operations ab8500_registers_fops = { - .open = ab8500_registers_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, + .open = ab8500_registers_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, }; static int ab8500_bank_print(struct seq_file *s, void *p) { - return seq_printf(s, "%d\n", debug_bank); + return seq_printf(s, "%d\n", debug_bank); } static int ab8500_bank_open(struct inode *inode, struct file *file) { - return single_open(file, ab8500_bank_print, inode->i_private); + return single_open(file, ab8500_bank_print, inode->i_private); } static ssize_t ab8500_bank_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) + const char __user *user_buf, + size_t count, loff_t *ppos) { - struct device *dev = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; - unsigned long user_bank; - int err; - - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf) - 1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_bank); - if (err) - return -EINVAL; - - if (user_bank >= AB8500_NUM_BANKS) { - dev_err(dev, "debugfs error input > number of banks\n"); - return -EINVAL; - } - - debug_bank = user_bank; - - return buf_size; + struct device *dev = ((struct seq_file *)(file->private_data))->private; + char buf[32]; + int buf_size; + unsigned long user_bank; + int err; + + /* Get userspace string and assure termination */ + buf_size = min(count, (sizeof(buf) - 1)); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + buf[buf_size] = 0; + + err = strict_strtoul(buf, 0, &user_bank); + if (err) + return -EINVAL; + + if (user_bank >= AB8500_NUM_BANKS) { + dev_err(dev, "debugfs error input > number of banks\n"); + return -EINVAL; + } + + debug_bank = user_bank; + + return buf_size; } static int ab8500_address_print(struct seq_file *s, void *p) { - return seq_printf(s, "0x%02X\n", debug_address); + return seq_printf(s, "0x%02X\n", debug_address); } static int ab8500_address_open(struct inode *inode, struct file *file) { - return single_open(file, ab8500_address_print, inode->i_private); + return single_open(file, ab8500_address_print, inode->i_private); } static ssize_t ab8500_address_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) + const char __user *user_buf, + size_t count, loff_t *ppos) { - struct device *dev = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; - unsigned long user_address; - int err; - - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf) - 1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_address); - if (err) - return -EINVAL; - if (user_address > 0xff) { - dev_err(dev, "debugfs error input > 0xff\n"); - return -EINVAL; - } - debug_address = user_address; - return buf_size; + struct device *dev = ((struct seq_file *)(file->private_data))->private; + char buf[32]; + int buf_size; + unsigned long user_address; + int err; + + /* Get userspace string and assure termination */ + buf_size = min(count, (sizeof(buf) - 1)); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + buf[buf_size] = 0; + + err = strict_strtoul(buf, 0, &user_address); + if (err) + return -EINVAL; + if (user_address > 0xff) { + dev_err(dev, "debugfs error input > 0xff\n"); + return -EINVAL; + } + debug_address = user_address; + return buf_size; } static int ab8500_val_print(struct seq_file *s, void *p) { - struct device *dev = s->private; - int ret; - u8 regvalue; - - ret = abx500_get_register_interruptible(dev, - (u8)debug_bank, (u8)debug_address, ®value); - if (ret < 0) { - dev_err(dev, "abx500_get_reg fail %d, %d\n", - ret, __LINE__); - return -EINVAL; - } - seq_printf(s, "0x%02X\n", regvalue); - - return 0; + struct device *dev = s->private; + int ret; + u8 regvalue; + + ret = abx500_get_register_interruptible(dev, + (u8)debug_bank, (u8)debug_address, ®value); + if (ret < 0) { + dev_err(dev, "abx500_get_reg fail %d, %d\n", + ret, __LINE__); + return -EINVAL; + } + seq_printf(s, "0x%02X\n", regvalue); + + return 0; } static int ab8500_val_open(struct inode *inode, struct file *file) { - return single_open(file, ab8500_val_print, inode->i_private); + return single_open(file, ab8500_val_print, inode->i_private); } static ssize_t ab8500_val_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) + const char __user *user_buf, + size_t count, loff_t *ppos) { - struct device *dev = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; - unsigned long user_val; - int err; - - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf)-1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_val); - if (err) - return -EINVAL; - if (user_val > 0xff) { - dev_err(dev, "debugfs error input > 0xff\n"); - return -EINVAL; - } - err = abx500_set_register_interruptible(dev, - (u8)debug_bank, debug_address, (u8)user_val); - if (err < 0) { - printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); - return -EINVAL; - } - - return buf_size; + struct device *dev = ((struct seq_file *)(file->private_data))->private; + char buf[32]; + int buf_size; + unsigned long user_val; + int err; + + /* Get userspace string and assure termination */ + buf_size = min(count, (sizeof(buf)-1)); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + buf[buf_size] = 0; + + err = strict_strtoul(buf, 0, &user_val); + if (err) + return -EINVAL; + if (user_val > 0xff) { + dev_err(dev, "debugfs error input > 0xff\n"); + return -EINVAL; + } + err = abx500_set_register_interruptible(dev, + (u8)debug_bank, debug_address, (u8)user_val); + if (err < 0) { + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); + return -EINVAL; + } + + return buf_size; } static const struct file_operations ab8500_bank_fops = { - .open = ab8500_bank_open, - .write = ab8500_bank_write, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, + .open = ab8500_bank_open, + .write = ab8500_bank_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, }; static const struct file_operations ab8500_address_fops = { - .open = ab8500_address_open, - .write = ab8500_address_write, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, + .open = ab8500_address_open, + .write = ab8500_address_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, }; static const struct file_operations ab8500_val_fops = { - .open = ab8500_val_open, - .write = ab8500_val_write, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, + .open = ab8500_val_open, + .write = ab8500_val_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, }; static struct dentry *ab8500_dir; @@ -572,77 +572,77 @@ static struct dentry *ab8500_val_file; static int __devinit ab8500_debug_probe(struct platform_device *plf) { - debug_bank = AB8500_MISC; - debug_address = AB8500_REV_REG & 0x00FF; + debug_bank = AB8500_MISC; + debug_address = AB8500_REV_REG & 0x00FF; - ab8500_dir = debugfs_create_dir(AB8500_NAME_STRING, NULL); - if (!ab8500_dir) - goto exit_no_debugfs; + ab8500_dir = debugfs_create_dir(AB8500_NAME_STRING, NULL); + if (!ab8500_dir) + goto exit_no_debugfs; - ab8500_reg_file = debugfs_create_file("all-bank-registers", - S_IRUGO, ab8500_dir, &plf->dev, &ab8500_registers_fops); - if (!ab8500_reg_file) - goto exit_destroy_dir; + ab8500_reg_file = debugfs_create_file("all-bank-registers", + S_IRUGO, ab8500_dir, &plf->dev, &ab8500_registers_fops); + if (!ab8500_reg_file) + goto exit_destroy_dir; - ab8500_bank_file = debugfs_create_file("register-bank", - (S_IRUGO | S_IWUGO), ab8500_dir, &plf->dev, &ab8500_bank_fops); - if (!ab8500_bank_file) - goto exit_destroy_reg; + ab8500_bank_file = debugfs_create_file("register-bank", + (S_IRUGO | S_IWUGO), ab8500_dir, &plf->dev, &ab8500_bank_fops); + if (!ab8500_bank_file) + goto exit_destroy_reg; - ab8500_address_file = debugfs_create_file("register-address", - (S_IRUGO | S_IWUGO), ab8500_dir, &plf->dev, - &ab8500_address_fops); - if (!ab8500_address_file) - goto exit_destroy_bank; + ab8500_address_file = debugfs_create_file("register-address", + (S_IRUGO | S_IWUGO), ab8500_dir, &plf->dev, + &ab8500_address_fops); + if (!ab8500_address_file) + goto exit_destroy_bank; - ab8500_val_file = debugfs_create_file("register-value", - (S_IRUGO | S_IWUGO), ab8500_dir, &plf->dev, &ab8500_val_fops); - if (!ab8500_val_file) - goto exit_destroy_address; + ab8500_val_file = debugfs_create_file("register-value", + (S_IRUGO | S_IWUGO), ab8500_dir, &plf->dev, &ab8500_val_fops); + if (!ab8500_val_file) + goto exit_destroy_address; - return 0; + return 0; exit_destroy_address: - debugfs_remove(ab8500_address_file); + debugfs_remove(ab8500_address_file); exit_destroy_bank: - debugfs_remove(ab8500_bank_file); + debugfs_remove(ab8500_bank_file); exit_destroy_reg: - debugfs_remove(ab8500_reg_file); + debugfs_remove(ab8500_reg_file); exit_destroy_dir: - debugfs_remove(ab8500_dir); + debugfs_remove(ab8500_dir); exit_no_debugfs: - dev_err(&plf->dev, "failed to create debugfs entries.\n"); - return -ENOMEM; + dev_err(&plf->dev, "failed to create debugfs entries.\n"); + return -ENOMEM; } static int __devexit ab8500_debug_remove(struct platform_device *plf) { - debugfs_remove(ab8500_val_file); - debugfs_remove(ab8500_address_file); - debugfs_remove(ab8500_bank_file); - debugfs_remove(ab8500_reg_file); - debugfs_remove(ab8500_dir); + debugfs_remove(ab8500_val_file); + debugfs_remove(ab8500_address_file); + debugfs_remove(ab8500_bank_file); + debugfs_remove(ab8500_reg_file); + debugfs_remove(ab8500_dir); - return 0; + return 0; } static struct platform_driver ab8500_debug_driver = { - .driver = { - .name = "ab8500-debug", - .owner = THIS_MODULE, - }, - .probe = ab8500_debug_probe, - .remove = __devexit_p(ab8500_debug_remove) + .driver = { + .name = "ab8500-debug", + .owner = THIS_MODULE, + }, + .probe = ab8500_debug_probe, + .remove = __devexit_p(ab8500_debug_remove) }; static int __init ab8500_debug_init(void) { - return platform_driver_register(&ab8500_debug_driver); + return platform_driver_register(&ab8500_debug_driver); } static void __exit ab8500_debug_exit(void) { - platform_driver_unregister(&ab8500_debug_driver); + platform_driver_unregister(&ab8500_debug_driver); } subsys_initcall(ab8500_debug_init); module_exit(ab8500_debug_exit); -- cgit v1.2.1 From 4c90aa94f6b3e33f57faaf19ef9819195dff61d3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 26 Nov 2010 17:19:34 +0000 Subject: mfd: Provide pm_runtime_no_callbacks flag in cell data Allow MFD cells to have pm_runtime_no_callbacks() called on them during registration. This causes the runtime PM framework to ignore them, allowing use of runtime PM to suspend the device as a whole even if not all drivers for the MFD can usefully implement runtime PM. For example, RTCs are likely to run continuously regardless of the power state of the system. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/mfd-core.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index ec99f681e773..d83ad0f141af 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -15,6 +15,7 @@ #include #include #include +#include #include static int mfd_add_device(struct device *parent, int id, @@ -82,6 +83,9 @@ static int mfd_add_device(struct device *parent, int id, if (ret) goto fail_res; + if (cell->pm_runtime_no_callbacks) + pm_runtime_no_callbacks(&pdev->dev); + kfree(res); return 0; -- cgit v1.2.1 From d450f19eea0c3f64d60dc37655bae03b2455e5bb Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 26 Nov 2010 17:19:35 +0000 Subject: mfd: Implement runtime PM for WM8994 core driver Allow the WM8994 to completely power off, including disabling the LDOs if they are software controlled, when it goes idle. The CODEC subdevice controls activity for the MFD as a whole. If the GPIOs need to be used while the device is active runtime PM should be disabled for the device by machine specific code. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8994-core.c | 46 +++++++++++++++++++++++----------------------- 1 file changed, 23 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index 8d221ba5e38d..41233c7fa581 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -169,8 +170,16 @@ out: EXPORT_SYMBOL_GPL(wm8994_set_bits); static struct mfd_cell wm8994_regulator_devs[] = { - { .name = "wm8994-ldo", .id = 1 }, - { .name = "wm8994-ldo", .id = 2 }, + { + .name = "wm8994-ldo", + .id = 1, + .pm_runtime_no_callbacks = true, + }, + { + .name = "wm8994-ldo", + .id = 2, + .pm_runtime_no_callbacks = true, + }, }; static struct resource wm8994_codec_resources[] = { @@ -200,6 +209,7 @@ static struct mfd_cell wm8994_devs[] = { .name = "wm8994-gpio", .num_resources = ARRAY_SIZE(wm8994_gpio_resources), .resources = wm8994_gpio_resources, + .pm_runtime_no_callbacks = true, }, }; @@ -231,7 +241,7 @@ static const char *wm8958_main_supplies[] = { }; #ifdef CONFIG_PM -static int wm8994_device_suspend(struct device *dev) +static int wm8994_suspend(struct device *dev) { struct wm8994 *wm8994 = dev_get_drvdata(dev); int ret; @@ -261,7 +271,7 @@ static int wm8994_device_suspend(struct device *dev) return 0; } -static int wm8994_device_resume(struct device *dev) +static int wm8994_resume(struct device *dev) { struct wm8994 *wm8994 = dev_get_drvdata(dev); int ret; @@ -471,6 +481,9 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq) goto err_irq; } + pm_runtime_enable(wm8994->dev); + pm_runtime_resume(wm8994->dev); + return 0; err_irq: @@ -490,6 +503,7 @@ err: static void wm8994_device_exit(struct wm8994 *wm8994) { + pm_runtime_disable(wm8994->dev); mfd_remove_devices(wm8994->dev); wm8994_irq_exit(wm8994); regulator_bulk_disable(wm8994->num_supplies, @@ -573,21 +587,6 @@ static int wm8994_i2c_remove(struct i2c_client *i2c) return 0; } -#ifdef CONFIG_PM -static int wm8994_i2c_suspend(struct i2c_client *i2c, pm_message_t state) -{ - return wm8994_device_suspend(&i2c->dev); -} - -static int wm8994_i2c_resume(struct i2c_client *i2c) -{ - return wm8994_device_resume(&i2c->dev); -} -#else -#define wm8994_i2c_suspend NULL -#define wm8994_i2c_resume NULL -#endif - static const struct i2c_device_id wm8994_i2c_id[] = { { "wm8994", WM8994 }, { "wm8958", WM8958 }, @@ -595,15 +594,16 @@ static const struct i2c_device_id wm8994_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id); +UNIVERSAL_DEV_PM_OPS(wm8994_pm_ops, wm8994_suspend, wm8994_resume, NULL); + static struct i2c_driver wm8994_i2c_driver = { .driver = { - .name = "wm8994", - .owner = THIS_MODULE, + .name = "wm8994", + .owner = THIS_MODULE, + .pm = &wm8994_pm_ops, }, .probe = wm8994_i2c_probe, .remove = wm8994_i2c_remove, - .suspend = wm8994_i2c_suspend, - .resume = wm8994_i2c_resume, .id_table = wm8994_i2c_id, }; -- cgit v1.2.1 From 816b4580cef948c7d9ac9e3e63fb1b663012f057 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Tue, 30 Nov 2010 13:54:39 -0800 Subject: mfd: Fix cs5535 warning on x86-64 ARRAY_SIZE() returns size_t; use %zu instead of %d so that we don't get warnings on x86-64. Signed-off-by: Andres Salomon Acked-by: Randy Dunlap Signed-off-by: Samuel Ortiz --- drivers/mfd/cs5535-mfd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/cs5535-mfd.c b/drivers/mfd/cs5535-mfd.c index b141ca7c777c..59ca6f151e78 100644 --- a/drivers/mfd/cs5535-mfd.c +++ b/drivers/mfd/cs5535-mfd.c @@ -103,7 +103,7 @@ static int __devinit cs5535_mfd_probe(struct pci_dev *pdev, goto err_disable; } - dev_info(&pdev->dev, "%d devices registered.\n", + dev_info(&pdev->dev, "%zu devices registered.\n", ARRAY_SIZE(cs5535_mfd_cells)); return 0; -- cgit v1.2.1 From df96669401cb8bac216f911f5bf92910357b29d3 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Sat, 23 Oct 2010 00:41:09 -0700 Subject: gpio: Convert cs5535 from pci device to platform device The cs5535-mfd driver now takes care of the PCI BAR handling; this simplifies the gpio driver a lot. Signed-off-by: Andres Salomon Signed-off-by: Samuel Ortiz --- drivers/gpio/cs5535-gpio.c | 93 ++++++++++++++++------------------------------ 1 file changed, 31 insertions(+), 62 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c index 815d98b2c1ba..70967e23bc3d 100644 --- a/drivers/gpio/cs5535-gpio.c +++ b/drivers/gpio/cs5535-gpio.c @@ -11,14 +11,13 @@ #include #include #include -#include +#include #include #include #include #include #define DRV_NAME "cs5535-gpio" -#define GPIO_BAR 1 /* * Some GPIO pins @@ -47,7 +46,7 @@ static struct cs5535_gpio_chip { struct gpio_chip chip; resource_size_t base; - struct pci_dev *pdev; + struct platform_device *pdev; spinlock_t lock; } cs5535_gpio_chip; @@ -301,10 +300,10 @@ static struct cs5535_gpio_chip cs5535_gpio_chip = { }, }; -static int __init cs5535_gpio_probe(struct pci_dev *pdev, - const struct pci_device_id *pci_id) +static int __devinit cs5535_gpio_probe(struct platform_device *pdev) { - int err; + struct resource *res; + int err = -EIO; ulong mask_orig = mask; /* There are two ways to get the GPIO base address; one is by @@ -314,25 +313,24 @@ static int __init cs5535_gpio_probe(struct pci_dev *pdev, * it turns out to be unreliable in the face of crappy BIOSes, we * can always go back to using MSRs.. */ - err = pci_enable_device_io(pdev); - if (err) { - dev_err(&pdev->dev, "can't enable device IO\n"); + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!res) { + dev_err(&pdev->dev, "can't fetch device resource info\n"); goto done; } - err = pci_request_region(pdev, GPIO_BAR, DRV_NAME); - if (err) { - dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", GPIO_BAR); + if (!request_region(res->start, resource_size(res), pdev->name)) { + dev_err(&pdev->dev, "can't request region\n"); goto done; } /* set up the driver-specific struct */ - cs5535_gpio_chip.base = pci_resource_start(pdev, GPIO_BAR); + cs5535_gpio_chip.base = res->start; cs5535_gpio_chip.pdev = pdev; spin_lock_init(&cs5535_gpio_chip.lock); - dev_info(&pdev->dev, "allocated PCI BAR #%d: base 0x%llx\n", GPIO_BAR, - (unsigned long long) cs5535_gpio_chip.base); + dev_info(&pdev->dev, "region 0x%x - 0x%x reserved\n", + res->start, res->end); /* mask out reserved pins */ mask &= 0x1F7FFFFF; @@ -350,78 +348,49 @@ static int __init cs5535_gpio_probe(struct pci_dev *pdev, if (err) goto release_region; - dev_info(&pdev->dev, DRV_NAME ": GPIO support successfully loaded.\n"); + dev_info(&pdev->dev, "GPIO support successfully loaded.\n"); return 0; release_region: - pci_release_region(pdev, GPIO_BAR); + release_region(res->start, resource_size(res)); done: return err; } -static void __exit cs5535_gpio_remove(struct pci_dev *pdev) +static int __devexit cs5535_gpio_remove(struct platform_device *pdev) { + struct resource *r; int err; err = gpiochip_remove(&cs5535_gpio_chip.chip); if (err) { /* uhh? */ dev_err(&pdev->dev, "unable to remove gpio_chip?\n"); + return err; } - pci_release_region(pdev, GPIO_BAR); -} - -static struct pci_device_id cs5535_gpio_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) }, - { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, cs5535_gpio_pci_tbl); -/* - * We can't use the standard PCI driver registration stuff here, since - * that allows only one driver to bind to each PCI device (and we want - * multiple drivers to be able to bind to the device). Instead, manually - * scan for the PCI device, request a single region, and keep track of the - * devices that we're using. - */ - -static int __init cs5535_gpio_scan_pci(void) -{ - struct pci_dev *pdev; - int err = -ENODEV; - int i; - - for (i = 0; i < ARRAY_SIZE(cs5535_gpio_pci_tbl); i++) { - pdev = pci_get_device(cs5535_gpio_pci_tbl[i].vendor, - cs5535_gpio_pci_tbl[i].device, NULL); - if (pdev) { - err = cs5535_gpio_probe(pdev, &cs5535_gpio_pci_tbl[i]); - if (err) - pci_dev_put(pdev); - - /* we only support a single CS5535/6 southbridge */ - break; - } - } - - return err; + r = platform_get_resource(pdev, IORESOURCE_IO, 0); + release_region(r->start, resource_size(r)); + return 0; } -static void __exit cs5535_gpio_free_pci(void) -{ - cs5535_gpio_remove(cs5535_gpio_chip.pdev); - pci_dev_put(cs5535_gpio_chip.pdev); -} +static struct platform_driver cs5535_gpio_drv = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = cs5535_gpio_probe, + .remove = __devexit_p(cs5535_gpio_remove), +}; static int __init cs5535_gpio_init(void) { - return cs5535_gpio_scan_pci(); + return platform_driver_register(&cs5535_gpio_drv); } static void __exit cs5535_gpio_exit(void) { - cs5535_gpio_free_pci(); + platform_driver_unregister(&cs5535_gpio_drv); } module_init(cs5535_gpio_init); -- cgit v1.2.1 From 69bc6def395ebfdb137898179d7e559ba4c779d8 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Sat, 23 Oct 2010 00:41:14 -0700 Subject: misc: Convert cs5535-mfgpt from pci device to platform device The cs5535-mfd driver now takes care of the PCI BAR handling; this simplifies the mfgpt driver a bunch. Signed-off-by: Andres Salomon Signed-off-by: Samuel Ortiz --- drivers/misc/cs5535-mfgpt.c | 73 +++++++++++++-------------------------------- 1 file changed, 21 insertions(+), 52 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c index 6f6218061b0d..499bd64e4d1d 100644 --- a/drivers/misc/cs5535-mfgpt.c +++ b/drivers/misc/cs5535-mfgpt.c @@ -16,12 +16,11 @@ #include #include #include -#include +#include #include #include #define DRV_NAME "cs5535-mfgpt" -#define MFGPT_BAR 2 static int mfgpt_reset_timers; module_param_named(mfgptfix, mfgpt_reset_timers, int, 0644); @@ -37,7 +36,7 @@ static struct cs5535_mfgpt_chip { DECLARE_BITMAP(avail, MFGPT_MAX_TIMERS); resource_size_t base; - struct pci_dev *pdev; + struct platform_device *pdev; spinlock_t lock; int initialized; } cs5535_mfgpt_chip; @@ -290,10 +289,10 @@ static int __init scan_timers(struct cs5535_mfgpt_chip *mfgpt) return timers; } -static int __init cs5535_mfgpt_probe(struct pci_dev *pdev, - const struct pci_device_id *pci_id) +static int __devinit cs5535_mfgpt_probe(struct platform_device *pdev) { - int err, t; + struct resource *res; + int err = -EIO, t; /* There are two ways to get the MFGPT base address; one is by * fetching it from MSR_LBAR_MFGPT, the other is by reading the @@ -302,29 +301,28 @@ static int __init cs5535_mfgpt_probe(struct pci_dev *pdev, * it turns out to be unreliable in the face of crappy BIOSes, we * can always go back to using MSRs.. */ - err = pci_enable_device_io(pdev); - if (err) { - dev_err(&pdev->dev, "can't enable device IO\n"); + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!res) { + dev_err(&pdev->dev, "can't fetch device resource info\n"); goto done; } - err = pci_request_region(pdev, MFGPT_BAR, DRV_NAME); - if (err) { - dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", MFGPT_BAR); + if (!request_region(res->start, resource_size(res), pdev->name)) { + dev_err(&pdev->dev, "can't request region\n"); goto done; } /* set up the driver-specific struct */ - cs5535_mfgpt_chip.base = pci_resource_start(pdev, MFGPT_BAR); + cs5535_mfgpt_chip.base = res->start; cs5535_mfgpt_chip.pdev = pdev; spin_lock_init(&cs5535_mfgpt_chip.lock); - dev_info(&pdev->dev, "allocated PCI BAR #%d: base 0x%llx\n", MFGPT_BAR, - (unsigned long long) cs5535_mfgpt_chip.base); + dev_info(&pdev->dev, "region 0x%x - 0x%x reserved\n", res->start, + res->end); /* detect the available timers */ t = scan_timers(&cs5535_mfgpt_chip); - dev_info(&pdev->dev, DRV_NAME ": %d MFGPT timers available\n", t); + dev_info(&pdev->dev, "%d MFGPT timers available\n", t); cs5535_mfgpt_chip.initialized = 1; return 0; @@ -332,47 +330,18 @@ done: return err; } -static struct pci_device_id cs5535_mfgpt_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) }, - { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) }, - { 0, }, +static struct platform_driver cs5535_mfgpt_drv = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = cs5535_mfgpt_probe, }; -MODULE_DEVICE_TABLE(pci, cs5535_mfgpt_pci_tbl); -/* - * Just like with the cs5535-gpio driver, we can't use the standard PCI driver - * registration stuff. It only allows only one driver to bind to each PCI - * device, and we want the GPIO and MFGPT drivers to be able to share a PCI - * device. Instead, we manually scan for the PCI device, request a single - * region, and keep track of the devices that we're using. - */ - -static int __init cs5535_mfgpt_scan_pci(void) -{ - struct pci_dev *pdev; - int err = -ENODEV; - int i; - - for (i = 0; i < ARRAY_SIZE(cs5535_mfgpt_pci_tbl); i++) { - pdev = pci_get_device(cs5535_mfgpt_pci_tbl[i].vendor, - cs5535_mfgpt_pci_tbl[i].device, NULL); - if (pdev) { - err = cs5535_mfgpt_probe(pdev, - &cs5535_mfgpt_pci_tbl[i]); - if (err) - pci_dev_put(pdev); - - /* we only support a single CS5535/6 southbridge */ - break; - } - } - - return err; -} static int __init cs5535_mfgpt_init(void) { - return cs5535_mfgpt_scan_pci(); + return platform_driver_register(&cs5535_mfgpt_drv); } module_init(cs5535_mfgpt_init); -- cgit v1.2.1 From ec9d0cf578007fa3f86fa34d77d9ccba82f03b29 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Wed, 1 Dec 2010 19:55:10 -0800 Subject: gpio/misc: Add MODULE_ALIAS entries for CS5535 functions This adds MODULE_ALIAS entries to the various cs5535 subdevice modules; this allows the modules to automatically be loaded when cs5535-mfd loads. Signed-off-by: Andres Salomon Signed-off-by: Samuel Ortiz --- drivers/gpio/cs5535-gpio.c | 1 + drivers/misc/cs5535-mfgpt.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c index 70967e23bc3d..f9813ef48534 100644 --- a/drivers/gpio/cs5535-gpio.c +++ b/drivers/gpio/cs5535-gpio.c @@ -399,3 +399,4 @@ module_exit(cs5535_gpio_exit); MODULE_AUTHOR("Andres Salomon "); MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c index 499bd64e4d1d..26693060b29b 100644 --- a/drivers/misc/cs5535-mfgpt.c +++ b/drivers/misc/cs5535-mfgpt.c @@ -349,3 +349,4 @@ module_init(cs5535_mfgpt_init); MODULE_AUTHOR("Andres Salomon "); MODULE_DESCRIPTION("CS5535/CS5536 MFGPT timer driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); -- cgit v1.2.1 From 6bce7bf1a1f8a79a57ff69910c115e1d2ed8913d Mon Sep 17 00:00:00 2001 From: Mattias Wallin Date: Thu, 2 Dec 2010 15:08:32 +0100 Subject: mfd: ab8500-core improved error handling in get_chip_id We check for dev before dereferencing it. Signed-off-by: Mattias Wallin Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index d9640a623ff4..e91b5b759004 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -103,8 +103,12 @@ static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = { static int ab8500_get_chip_id(struct device *dev) { - struct ab8500 *ab8500 = dev_get_drvdata(dev->parent); - return (int)ab8500->chip_id; + struct ab8500 *ab8500; + + if (!dev) + return -EINVAL; + ab8500 = dev_get_drvdata(dev->parent); + return ab8500 ? (int)ab8500->chip_id : -EINVAL; } static int set_register_interruptible(struct ab8500 *ab8500, u8 bank, -- cgit v1.2.1 From cca69b67b3ba954ed8642583295b51933f902227 Mon Sep 17 00:00:00 2001 From: Mattias Wallin Date: Thu, 2 Dec 2010 15:09:36 +0100 Subject: mfd: Export ab8500 chip id to sysfs This patch adds a file into sysfs for reading out chip id. It has been requested for modem silent reboot. Signed-off-by: Mattias Wallin Signed-off-by: Ludovic Barre Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index e91b5b759004..2bd4437cf331 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -436,6 +436,26 @@ static struct mfd_cell ab8500_devs[] = { }, }; +static ssize_t show_chip_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ab8500 *ab8500; + + ab8500 = dev_get_drvdata(dev); + return sprintf(buf, "%#x\n", ab8500 ? ab8500->chip_id : -EINVAL); +} + +static DEVICE_ATTR(chip_id, S_IRUGO, show_chip_id, NULL); + +static struct attribute *ab8500_sysfs_entries[] = { + &dev_attr_chip_id.attr, + NULL, +}; + +static struct attribute_group ab8500_attr_group = { + .attrs = ab8500_sysfs_entries, +}; + int __devinit ab8500_init(struct ab8500 *ab8500) { struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev); @@ -510,6 +530,10 @@ int __devinit ab8500_init(struct ab8500 *ab8500) if (ret) goto out_freeirq; + ret = sysfs_create_group(&ab8500->dev->kobj, &ab8500_attr_group); + if (ret) + dev_err(ab8500->dev, "error creating sysfs entries\n"); + return ret; out_freeirq: @@ -523,6 +547,7 @@ out_removeirq: int __devexit ab8500_exit(struct ab8500 *ab8500) { + sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group); mfd_remove_devices(ab8500->dev); if (ab8500->irq_base) { free_irq(ab8500->irq, ab8500); -- cgit v1.2.1 From 4f079985b2caacfda5103dd85fb028a2848c84ab Mon Sep 17 00:00:00 2001 From: Mattias Wallin Date: Thu, 2 Dec 2010 15:10:27 +0100 Subject: mfd: ab8500-core wake up from suspend This patch makes the system wake up from suspend when an ab8500 interrupt occur. This can for example be USB cable insert or an RTC alarm. Signed-off-by: Mattias Wallin Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 2bd4437cf331..e464e94c4bc0 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -519,7 +519,8 @@ int __devinit ab8500_init(struct ab8500 *ab8500) return ret; ret = request_threaded_irq(ab8500->irq, NULL, ab8500_irq, - IRQF_ONESHOT, "ab8500", ab8500); + IRQF_ONESHOT | IRQF_NO_SUSPEND, + "ab8500", ab8500); if (ret) goto out_removeirq; } -- cgit v1.2.1 From e098aded79f24e2024139e82f778ff9db6dc142a Mon Sep 17 00:00:00 2001 From: Mattias Wallin Date: Thu, 2 Dec 2010 15:40:31 +0100 Subject: mfd: ab8500-core ioresources irq for subdrivers added This patch adds the ioresources used by subdrivers to retrieve their interrupt. Signed-off-by: Mattias Wallin Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 206 ++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 199 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index e464e94c4bc0..7f01a3a1d10f 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -397,12 +397,188 @@ static struct resource ab8500_poweronkey_db_resources[] = { }, }; +static struct resource ab8500_bm_resources[] = { + { + .name = "MAIN_EXT_CH_NOT_OK", + .start = AB8500_INT_MAIN_EXT_CH_NOT_OK, + .end = AB8500_INT_MAIN_EXT_CH_NOT_OK, + .flags = IORESOURCE_IRQ, + }, + { + .name = "BATT_OVV", + .start = AB8500_INT_BATT_OVV, + .end = AB8500_INT_BATT_OVV, + .flags = IORESOURCE_IRQ, + }, + { + .name = "MAIN_CH_UNPLUG_DET", + .start = AB8500_INT_MAIN_CH_UNPLUG_DET, + .end = AB8500_INT_MAIN_CH_UNPLUG_DET, + .flags = IORESOURCE_IRQ, + }, + { + .name = "MAIN_CHARGE_PLUG_DET", + .start = AB8500_INT_MAIN_CH_PLUG_DET, + .end = AB8500_INT_MAIN_CH_PLUG_DET, + .flags = IORESOURCE_IRQ, + }, + { + .name = "VBUS_DET_F", + .start = AB8500_INT_VBUS_DET_F, + .end = AB8500_INT_VBUS_DET_F, + .flags = IORESOURCE_IRQ, + }, + { + .name = "VBUS_DET_R", + .start = AB8500_INT_VBUS_DET_R, + .end = AB8500_INT_VBUS_DET_R, + .flags = IORESOURCE_IRQ, + }, + { + .name = "BAT_CTRL_INDB", + .start = AB8500_INT_BAT_CTRL_INDB, + .end = AB8500_INT_BAT_CTRL_INDB, + .flags = IORESOURCE_IRQ, + }, + { + .name = "CH_WD_EXP", + .start = AB8500_INT_CH_WD_EXP, + .end = AB8500_INT_CH_WD_EXP, + .flags = IORESOURCE_IRQ, + }, + { + .name = "VBUS_OVV", + .start = AB8500_INT_VBUS_OVV, + .end = AB8500_INT_VBUS_OVV, + .flags = IORESOURCE_IRQ, + }, + { + .name = "NCONV_ACCU", + .start = AB8500_INT_CCN_CONV_ACC, + .end = AB8500_INT_CCN_CONV_ACC, + .flags = IORESOURCE_IRQ, + }, + { + .name = "LOW_BAT_F", + .start = AB8500_INT_LOW_BAT_F, + .end = AB8500_INT_LOW_BAT_F, + .flags = IORESOURCE_IRQ, + }, + { + .name = "LOW_BAT_R", + .start = AB8500_INT_LOW_BAT_R, + .end = AB8500_INT_LOW_BAT_R, + .flags = IORESOURCE_IRQ, + }, + { + .name = "BTEMP_LOW", + .start = AB8500_INT_BTEMP_LOW, + .end = AB8500_INT_BTEMP_LOW, + .flags = IORESOURCE_IRQ, + }, + { + .name = "BTEMP_HIGH", + .start = AB8500_INT_BTEMP_HIGH, + .end = AB8500_INT_BTEMP_HIGH, + .flags = IORESOURCE_IRQ, + }, + { + .name = "USB_CHARGER_NOT_OKR", + .start = AB8500_INT_USB_CHARGER_NOT_OK, + .end = AB8500_INT_USB_CHARGER_NOT_OK, + .flags = IORESOURCE_IRQ, + }, + { + .name = "USB_CHARGE_DET_DONE", + .start = AB8500_INT_USB_CHG_DET_DONE, + .end = AB8500_INT_USB_CHG_DET_DONE, + .flags = IORESOURCE_IRQ, + }, + { + .name = "USB_CH_TH_PROT_R", + .start = AB8500_INT_USB_CH_TH_PROT_R, + .end = AB8500_INT_USB_CH_TH_PROT_R, + .flags = IORESOURCE_IRQ, + }, + { + .name = "MAIN_CH_TH_PROT_R", + .start = AB8500_INT_MAIN_CH_TH_PROT_R, + .end = AB8500_INT_MAIN_CH_TH_PROT_R, + .flags = IORESOURCE_IRQ, + }, + { + .name = "USB_CHARGER_NOT_OKF", + .start = AB8500_INT_USB_CHARGER_NOT_OKF, + .end = AB8500_INT_USB_CHARGER_NOT_OKF, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource ab8500_debug_resources[] = { + { + .name = "IRQ_FIRST", + .start = AB8500_INT_MAIN_EXT_CH_NOT_OK, + .end = AB8500_INT_MAIN_EXT_CH_NOT_OK, + .flags = IORESOURCE_IRQ, + }, + { + .name = "IRQ_LAST", + .start = AB8500_INT_USB_CHARGER_NOT_OKF, + .end = AB8500_INT_USB_CHARGER_NOT_OKF, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource ab8500_usb_resources[] = { + { + .name = "ID_WAKEUP_R", + .start = AB8500_INT_ID_WAKEUP_R, + .end = AB8500_INT_ID_WAKEUP_R, + .flags = IORESOURCE_IRQ, + }, + { + .name = "ID_WAKEUP_F", + .start = AB8500_INT_ID_WAKEUP_F, + .end = AB8500_INT_ID_WAKEUP_F, + .flags = IORESOURCE_IRQ, + }, + { + .name = "VBUS_DET_F", + .start = AB8500_INT_VBUS_DET_F, + .end = AB8500_INT_VBUS_DET_F, + .flags = IORESOURCE_IRQ, + }, + { + .name = "VBUS_DET_R", + .start = AB8500_INT_VBUS_DET_R, + .end = AB8500_INT_VBUS_DET_R, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource ab8500_temp_resources[] = { + { + .name = "AB8500_TEMP_WARM", + .start = AB8500_INT_TEMP_WARM, + .end = AB8500_INT_TEMP_WARM, + .flags = IORESOURCE_IRQ, + }, +}; + static struct mfd_cell ab8500_devs[] = { #ifdef CONFIG_DEBUG_FS { .name = "ab8500-debug", + .num_resources = ARRAY_SIZE(ab8500_debug_resources), + .resources = ab8500_debug_resources, }, #endif + { + .name = "ab8500-sysctrl", + }, + { + .name = "ab8500-regulator", + }, { .name = "ab8500-gpadc", .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), @@ -413,6 +589,22 @@ static struct mfd_cell ab8500_devs[] = { .num_resources = ARRAY_SIZE(ab8500_rtc_resources), .resources = ab8500_rtc_resources, }, + { + .name = "ab8500-bm", + .num_resources = ARRAY_SIZE(ab8500_bm_resources), + .resources = ab8500_bm_resources, + }, + { .name = "ab8500-codec", }, + { + .name = "ab8500-usb", + .num_resources = ARRAY_SIZE(ab8500_usb_resources), + .resources = ab8500_usb_resources, + }, + { + .name = "ab8500-poweron-key", + .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), + .resources = ab8500_poweronkey_db_resources, + }, { .name = "ab8500-pwm", .id = 1, @@ -425,14 +617,14 @@ static struct mfd_cell ab8500_devs[] = { .name = "ab8500-pwm", .id = 3, }, - { .name = "ab8500-charger", }, - { .name = "ab8500-audio", }, - { .name = "ab8500-usb", }, - { .name = "ab8500-regulator", }, + { .name = "ab8500-leds", }, { - .name = "ab8500-poweron-key", - .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), - .resources = ab8500_poweronkey_db_resources, + .name = "ab8500-denc", + }, + { + .name = "ab8500-temp", + .num_resources = ARRAY_SIZE(ab8500_temp_resources), + .resources = ab8500_temp_resources, }, }; -- cgit v1.2.1 From 5b9cecd68f3ef72ab9e586b0c2995a40a2f1e630 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Wed, 8 Dec 2010 10:42:04 +0800 Subject: mfd: Fix twl_probe section mismatch warning in mfd/twl-core.c Fix the following section mismatch warning when building omap2plus_defconfig: WARNING: vmlinux.o(.data+0x47d7c): Section mismatch in reference from the variable twl_driver to the function .init.text:twl_probe() Signed-off-by: Bryan Wu Signed-off-by: Paul Walmsley Signed-off-by: Samuel Ortiz --- drivers/mfd/twl-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 12abd5b924b3..a35fa7dcbf53 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -1003,7 +1003,7 @@ static int twl_remove(struct i2c_client *client) } /* NOTE: this driver only handles a single twl4030/tps659x0 chip */ -static int __init +static int __devinit twl_probe(struct i2c_client *client, const struct i2c_device_id *id) { int status; -- cgit v1.2.1 From 4d1cdbf696501c0a942c5b71f3fab9434a4465c4 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 9 Dec 2010 10:30:11 -0700 Subject: mfd: Remove tps6586x device ID check ... and convert it to a dev_info print at probe time. There are many variants of this chip with different values of VERSIONCRC. The set of values is large, and not useful to enumerate. All are SW compatible. The difference lies in default settings of the various power rails, and other similar differences. The driver, or clients of the driver, shouldn't be affected by this, since all rails should be programmed into the desired state in all cases for correct operation. Derived-from-code-by: Andrew Chew Signed-off-by: Stephen Warren Signed-off-by: Samuel Ortiz --- drivers/mfd/tps6586x.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index b4931ab34929..35757399add0 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -46,8 +46,6 @@ /* device id */ #define TPS6586X_VERSIONCRC 0xcd -#define TPS658621A_VERSIONCRC 0x15 -#define TPS658621C_VERSIONCRC 0x2c struct tps6586x_irq_data { u8 mask_reg; @@ -498,11 +496,7 @@ static int __devinit tps6586x_i2c_probe(struct i2c_client *client, return -EIO; } - if ((ret != TPS658621A_VERSIONCRC) && - (ret != TPS658621C_VERSIONCRC)) { - dev_err(&client->dev, "Unsupported chip ID: %x\n", ret); - return -ENODEV; - } + dev_info(&client->dev, "VERSIONCRC is %02x\n", ret); tps6586x = kzalloc(sizeof(struct tps6586x), GFP_KERNEL); if (tps6586x == NULL) -- cgit v1.2.1 From 59f2ad2e0ee13bbb4cfb399e08df8c54b264dd39 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 11 Dec 2010 12:59:35 +0000 Subject: mfd: Staticise unexported symbols in ASIC3 There's no use of either of these outside of the driver so they can be declared static. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/asic3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index 7de708d15d72..6b82eb0fa55c 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -57,7 +57,7 @@ struct asic3_clk { .rate = _rate, \ } -struct asic3_clk asic3_clk_init[] __initdata = { +static struct asic3_clk asic3_clk_init[] __initdata = { INIT_CDEX(SPI, 0), INIT_CDEX(OWM, 5000000), INIT_CDEX(PWM0, 0), @@ -102,7 +102,7 @@ static inline u32 asic3_read_register(struct asic3 *asic, (reg >> asic->bus_shift)); } -void asic3_set_register(struct asic3 *asic, u32 reg, u32 bits, bool set) +static void asic3_set_register(struct asic3 *asic, u32 reg, u32 bits, bool set) { unsigned long flags; u32 val; -- cgit v1.2.1 From fe421425d78176f4a3509ce11b8d683cf1604e3a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 11 Dec 2010 13:00:34 +0000 Subject: mfd: Correct ASIC3 IRQ_OWM resource setup We should specify both a start and an end for the IRQ range rather than initialise the start twice. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/asic3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index 6b82eb0fa55c..3c7dc5ebfe4d 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -635,7 +635,7 @@ static struct resource ds1wm_resources[] = { }, { .start = ASIC3_IRQ_OWM, - .start = ASIC3_IRQ_OWM, + .end = ASIC3_IRQ_OWM, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; -- cgit v1.2.1 From 87fff232cb76828b44312843d96854704f71ed19 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 13 Dec 2010 14:06:47 +0000 Subject: mfd: Use NULL to initialise NULL pointers in ab8500-debugfs Partly for coding style reasons, but mostly because sparse warns on it. Signed-off-by: Mark Brown Acked-by: Mattias Wallin Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index dfdc76e0b96e..3c1541ae7223 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -189,7 +189,7 @@ static struct ab8500_i2c_ranges debug_ranges[AB8500_NUM_BANKS] = { }, [AB8500_DBI] = { .num_ranges = 0, - .range = 0, + .range = NULL, }, [AB8500_ECI_AV_ACC] = { .num_ranges = 1, @@ -202,7 +202,7 @@ static struct ab8500_i2c_ranges debug_ranges[AB8500_NUM_BANKS] = { }, [0x9] = { .num_ranges = 0, - .range = 0, + .range = NULL, }, [AB8500_GPADC] = { .num_ranges = 1, @@ -278,7 +278,7 @@ static struct ab8500_i2c_ranges debug_ranges[AB8500_NUM_BANKS] = { }, [AB8500_INTERRUPT] = { .num_ranges = 0, - .range = 0, + .range = NULL, }, [AB8500_RTC] = { .num_ranges = 1, @@ -328,19 +328,19 @@ static struct ab8500_i2c_ranges debug_ranges[AB8500_NUM_BANKS] = { }, [0x11] = { .num_ranges = 0, - .range = 0, + .range = NULL, }, [0x12] = { .num_ranges = 0, - .range = 0, + .range = NULL, }, [0x13] = { .num_ranges = 0, - .range = 0, + .range = NULL, }, [0x14] = { .num_ranges = 0, - .range = 0, + .range = NULL, }, [AB8500_OTP_EMUL] = { .num_ranges = 1, -- cgit v1.2.1 From 8d2d3a3a329ebf20f733ac1499ebc565f497f051 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 11 Dec 2010 16:44:49 +0000 Subject: mfd: Staticise internal functions in HTC I2CCPLD driver Most of these are GPIO operations, though a couple are just internal only functions. Signed-off-by: Mark Brown Acked-by: Cory Maccarrone Signed-off-by: Samuel Ortiz --- drivers/mfd/htc-i2cpld.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/htc-i2cpld.c b/drivers/mfd/htc-i2cpld.c index 594c9a8e25e1..dd24355c9650 100644 --- a/drivers/mfd/htc-i2cpld.c +++ b/drivers/mfd/htc-i2cpld.c @@ -235,7 +235,7 @@ static irqreturn_t htcpld_handler(int irq, void *dev) * and that work is scheduled in the set routine. The kernel can then run * the I2C functions, which will sleep, in process context. */ -void htcpld_chip_set(struct gpio_chip *chip, unsigned offset, int val) +static void htcpld_chip_set(struct gpio_chip *chip, unsigned offset, int val) { struct i2c_client *client; struct htcpld_chip *chip_data; @@ -259,7 +259,7 @@ void htcpld_chip_set(struct gpio_chip *chip, unsigned offset, int val) schedule_work(&(chip_data->set_val_work)); } -void htcpld_chip_set_ni(struct work_struct *work) +static void htcpld_chip_set_ni(struct work_struct *work) { struct htcpld_chip *chip_data; struct i2c_client *client; @@ -269,7 +269,7 @@ void htcpld_chip_set_ni(struct work_struct *work) i2c_smbus_read_byte_data(client, chip_data->cache_out); } -int htcpld_chip_get(struct gpio_chip *chip, unsigned offset) +static int htcpld_chip_get(struct gpio_chip *chip, unsigned offset) { struct htcpld_chip *chip_data; int val = 0; @@ -316,7 +316,7 @@ static int htcpld_direction_input(struct gpio_chip *chip, return (offset < chip->ngpio) ? 0 : -EINVAL; } -int htcpld_chip_to_irq(struct gpio_chip *chip, unsigned offset) +static int htcpld_chip_to_irq(struct gpio_chip *chip, unsigned offset) { struct htcpld_chip *chip_data; @@ -328,7 +328,7 @@ int htcpld_chip_to_irq(struct gpio_chip *chip, unsigned offset) return -EINVAL; } -void htcpld_chip_reset(struct i2c_client *client) +static void htcpld_chip_reset(struct i2c_client *client) { struct htcpld_chip *chip_data = i2c_get_clientdata(client); if (!chip_data) -- cgit v1.2.1 From 49f89d9acb6cba6475923e42a3d13540a70a926e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 11 Dec 2010 12:31:31 +0000 Subject: mfd: Convert 88PM860x driver to new irq_ APIs The interrupt controller APIs are being updated to pass a struct irq_data rather than the interrupt number. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/88pm860x-core.c | 36 +++++++++++++++--------------------- 1 file changed, 15 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c index 20895e7a99c9..793300c554b4 100644 --- a/drivers/mfd/88pm860x-core.c +++ b/drivers/mfd/88pm860x-core.c @@ -361,12 +361,6 @@ static struct pm860x_irq_data pm860x_irqs[] = { }, }; -static inline struct pm860x_irq_data *irq_to_pm860x(struct pm860x_chip *chip, - int irq) -{ - return &pm860x_irqs[irq - chip->irq_base]; -} - static irqreturn_t pm860x_irq(int irq, void *data) { struct pm860x_chip *chip = data; @@ -388,16 +382,16 @@ static irqreturn_t pm860x_irq(int irq, void *data) return IRQ_HANDLED; } -static void pm860x_irq_lock(unsigned int irq) +static void pm860x_irq_lock(struct irq_data *data) { - struct pm860x_chip *chip = get_irq_chip_data(irq); + struct pm860x_chip *chip = irq_data_get_irq_chip_data(data); mutex_lock(&chip->irq_lock); } -static void pm860x_irq_sync_unlock(unsigned int irq) +static void pm860x_irq_sync_unlock(struct irq_data *data) { - struct pm860x_chip *chip = get_irq_chip_data(irq); + struct pm860x_chip *chip = irq_data_get_irq_chip_data(data); struct pm860x_irq_data *irq_data; struct i2c_client *i2c; static unsigned char cached[3] = {0x0, 0x0, 0x0}; @@ -439,25 +433,25 @@ static void pm860x_irq_sync_unlock(unsigned int irq) mutex_unlock(&chip->irq_lock); } -static void pm860x_irq_enable(unsigned int irq) +static void pm860x_irq_enable(struct irq_data *data) { - struct pm860x_chip *chip = get_irq_chip_data(irq); - pm860x_irqs[irq - chip->irq_base].enable - = pm860x_irqs[irq - chip->irq_base].offs; + struct pm860x_chip *chip = irq_data_get_irq_chip_data(data); + pm860x_irqs[data->irq - chip->irq_base].enable + = pm860x_irqs[data->irq - chip->irq_base].offs; } -static void pm860x_irq_disable(unsigned int irq) +static void pm860x_irq_disable(struct irq_data *data) { - struct pm860x_chip *chip = get_irq_chip_data(irq); - pm860x_irqs[irq - chip->irq_base].enable = 0; + struct pm860x_chip *chip = irq_data_get_irq_chip_data(data); + pm860x_irqs[data->irq - chip->irq_base].enable = 0; } static struct irq_chip pm860x_irq_chip = { .name = "88pm860x", - .bus_lock = pm860x_irq_lock, - .bus_sync_unlock = pm860x_irq_sync_unlock, - .enable = pm860x_irq_enable, - .disable = pm860x_irq_disable, + .irq_bus_lock = pm860x_irq_lock, + .irq_bus_sync_unlock = pm860x_irq_sync_unlock, + .irq_enable = pm860x_irq_enable, + .irq_disable = pm860x_irq_disable, }; static int __devinit device_gpadc_init(struct pm860x_chip *chip, -- cgit v1.2.1 From 0f76aaebe8015d6a850cb03622382bacb7860398 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 11 Dec 2010 13:08:57 +0000 Subject: mfd: Convert ASIC3 to new irq_ APIs The interrupt controller APIs are being updated to pass a struct irq_data rather than the interrupt number. Signed-off-by: Mark Brown Acked-by: Ian Molton Signed-off-by: Samuel Ortiz --- drivers/mfd/asic3.c | 56 ++++++++++++++++++++++++++--------------------------- 1 file changed, 28 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index 3c7dc5ebfe4d..6a1f94042612 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -226,14 +226,14 @@ static inline int asic3_irq_to_index(struct asic3 *asic, int irq) return (irq - asic->irq_base) & 0xf; } -static void asic3_mask_gpio_irq(unsigned int irq) +static void asic3_mask_gpio_irq(struct irq_data *data) { - struct asic3 *asic = get_irq_chip_data(irq); + struct asic3 *asic = irq_data_get_irq_chip_data(data); u32 val, bank, index; unsigned long flags; - bank = asic3_irq_to_bank(asic, irq); - index = asic3_irq_to_index(asic, irq); + bank = asic3_irq_to_bank(asic, data->irq); + index = asic3_irq_to_index(asic, data->irq); spin_lock_irqsave(&asic->lock, flags); val = asic3_read_register(asic, bank + ASIC3_GPIO_MASK); @@ -242,9 +242,9 @@ static void asic3_mask_gpio_irq(unsigned int irq) spin_unlock_irqrestore(&asic->lock, flags); } -static void asic3_mask_irq(unsigned int irq) +static void asic3_mask_irq(struct irq_data *data) { - struct asic3 *asic = get_irq_chip_data(irq); + struct asic3 *asic = irq_data_get_irq_chip_data(data); int regval; unsigned long flags; @@ -254,7 +254,7 @@ static void asic3_mask_irq(unsigned int irq) ASIC3_INTR_INT_MASK); regval &= ~(ASIC3_INTMASK_MASK0 << - (irq - (asic->irq_base + ASIC3_NUM_GPIOS))); + (data->irq - (asic->irq_base + ASIC3_NUM_GPIOS))); asic3_write_register(asic, ASIC3_INTR_BASE + @@ -263,14 +263,14 @@ static void asic3_mask_irq(unsigned int irq) spin_unlock_irqrestore(&asic->lock, flags); } -static void asic3_unmask_gpio_irq(unsigned int irq) +static void asic3_unmask_gpio_irq(struct irq_data *data) { - struct asic3 *asic = get_irq_chip_data(irq); + struct asic3 *asic = irq_data_get_irq_chip_data(data); u32 val, bank, index; unsigned long flags; - bank = asic3_irq_to_bank(asic, irq); - index = asic3_irq_to_index(asic, irq); + bank = asic3_irq_to_bank(asic, data->irq); + index = asic3_irq_to_index(asic, data->irq); spin_lock_irqsave(&asic->lock, flags); val = asic3_read_register(asic, bank + ASIC3_GPIO_MASK); @@ -279,9 +279,9 @@ static void asic3_unmask_gpio_irq(unsigned int irq) spin_unlock_irqrestore(&asic->lock, flags); } -static void asic3_unmask_irq(unsigned int irq) +static void asic3_unmask_irq(struct irq_data *data) { - struct asic3 *asic = get_irq_chip_data(irq); + struct asic3 *asic = irq_data_get_irq_chip_data(data); int regval; unsigned long flags; @@ -291,7 +291,7 @@ static void asic3_unmask_irq(unsigned int irq) ASIC3_INTR_INT_MASK); regval |= (ASIC3_INTMASK_MASK0 << - (irq - (asic->irq_base + ASIC3_NUM_GPIOS))); + (data->irq - (asic->irq_base + ASIC3_NUM_GPIOS))); asic3_write_register(asic, ASIC3_INTR_BASE + @@ -300,15 +300,15 @@ static void asic3_unmask_irq(unsigned int irq) spin_unlock_irqrestore(&asic->lock, flags); } -static int asic3_gpio_irq_type(unsigned int irq, unsigned int type) +static int asic3_gpio_irq_type(struct irq_data *data, unsigned int type) { - struct asic3 *asic = get_irq_chip_data(irq); + struct asic3 *asic = irq_data_get_irq_chip_data(data); u32 bank, index; u16 trigger, level, edge, bit; unsigned long flags; - bank = asic3_irq_to_bank(asic, irq); - index = asic3_irq_to_index(asic, irq); + bank = asic3_irq_to_bank(asic, data->irq); + index = asic3_irq_to_index(asic, data->irq); bit = 1<lock, flags); @@ -318,7 +318,7 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type) bank + ASIC3_GPIO_EDGE_TRIGGER); trigger = asic3_read_register(asic, bank + ASIC3_GPIO_TRIGGER_TYPE); - asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit; + asic->irq_bothedge[(data->irq - asic->irq_base) >> 4] &= ~bit; if (type == IRQ_TYPE_EDGE_RISING) { trigger |= bit; @@ -328,11 +328,11 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type) edge &= ~bit; } else if (type == IRQ_TYPE_EDGE_BOTH) { trigger |= bit; - if (asic3_gpio_get(&asic->gpio, irq - asic->irq_base)) + if (asic3_gpio_get(&asic->gpio, data->irq - asic->irq_base)) edge &= ~bit; else edge |= bit; - asic->irq_bothedge[(irq - asic->irq_base) >> 4] |= bit; + asic->irq_bothedge[(data->irq - asic->irq_base) >> 4] |= bit; } else if (type == IRQ_TYPE_LEVEL_LOW) { trigger &= ~bit; level &= ~bit; @@ -359,17 +359,17 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type) static struct irq_chip asic3_gpio_irq_chip = { .name = "ASIC3-GPIO", - .ack = asic3_mask_gpio_irq, - .mask = asic3_mask_gpio_irq, - .unmask = asic3_unmask_gpio_irq, - .set_type = asic3_gpio_irq_type, + .irq_ack = asic3_mask_gpio_irq, + .irq_mask = asic3_mask_gpio_irq, + .irq_unmask = asic3_unmask_gpio_irq, + .irq_set_type = asic3_gpio_irq_type, }; static struct irq_chip asic3_irq_chip = { .name = "ASIC3", - .ack = asic3_mask_irq, - .mask = asic3_mask_irq, - .unmask = asic3_unmask_irq, + .irq_ack = asic3_mask_irq, + .irq_mask = asic3_mask_irq, + .irq_unmask = asic3_unmask_irq, }; static int __init asic3_irq_probe(struct platform_device *pdev) -- cgit v1.2.1 From c91ad349d084f8c034ff60fb56d41a9667f71ae4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 11 Dec 2010 13:14:12 +0000 Subject: mfd: Convert AB3500 to new irq_ APIs The genirq core is being updated to pass struct irq_data rather than irq numbers into chip drivers. As part of the update assignments to NULL for unused operations are removed, these are not needed and the genirq docs should be good enough. Signed-off-by: Mark Brown Acked-by: Mattias Wallin Signed-off-by: Samuel Ortiz --- drivers/mfd/ab3550-core.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/ab3550-core.c b/drivers/mfd/ab3550-core.c index 8a98739e6d9c..5fbca346b998 100644 --- a/drivers/mfd/ab3550-core.c +++ b/drivers/mfd/ab3550-core.c @@ -1159,15 +1159,16 @@ static void ab3550_mask_work(struct work_struct *work) } } -static void ab3550_mask(unsigned int irq) +static void ab3550_mask(struct irq_data *data) { unsigned long flags; struct ab3550 *ab; struct ab3550_platform_data *plf_data; + int irq; - ab = get_irq_chip_data(irq); + ab = irq_data_get_irq_chip_data(data); plf_data = ab->i2c_client[0]->dev.platform_data; - irq -= plf_data->irq.base; + irq = data->irq - plf_data->irq.base; spin_lock_irqsave(&ab->event_lock, flags); ab->event_mask[irq / 8] |= BIT(irq % 8); @@ -1176,15 +1177,16 @@ static void ab3550_mask(unsigned int irq) schedule_work(&ab->mask_work); } -static void ab3550_unmask(unsigned int irq) +static void ab3550_unmask(struct irq_data *data) { unsigned long flags; struct ab3550 *ab; struct ab3550_platform_data *plf_data; + int irq; - ab = get_irq_chip_data(irq); + ab = irq_data_get_irq_chip_data(data); plf_data = ab->i2c_client[0]->dev.platform_data; - irq -= plf_data->irq.base; + irq = data->irq - plf_data->irq.base; spin_lock_irqsave(&ab->event_lock, flags); ab->event_mask[irq / 8] &= ~BIT(irq % 8); @@ -1193,20 +1195,16 @@ static void ab3550_unmask(unsigned int irq) schedule_work(&ab->mask_work); } -static void noop(unsigned int irq) +static void noop(struct irq_data *data) { } static struct irq_chip ab3550_irq_chip = { .name = "ab3550-core", /* Keep the same name as the request */ - .startup = NULL, /* defaults to enable */ - .shutdown = NULL, /* defaults to disable */ - .enable = NULL, /* defaults to unmask */ - .disable = ab3550_mask, /* No default to mask in chip.c */ - .ack = noop, - .mask = ab3550_mask, - .unmask = ab3550_unmask, - .end = NULL, + .irq_disable = ab3550_mask, /* No default to mask in chip.c */ + .irq_ack = noop, + .irq_mask = ab3550_mask, + .irq_unmask = ab3550_unmask, }; struct ab_family_id { -- cgit v1.2.1 From 9505a0a0ac6160480eaab8d592dce6161e67e05d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 11 Dec 2010 13:16:08 +0000 Subject: mfd: Convert AB8500 to new irq_ methods The genirq core is being converted to supply struct irq_data to chips rather than the interrupt number. Signed-off-by: Mark Brown Acked-by: Mattias Wallin Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 7f01a3a1d10f..86cc8874e6de 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -232,16 +232,16 @@ static struct abx500_ops ab8500_ops = { .startup_irq_enabled = NULL, }; -static void ab8500_irq_lock(unsigned int irq) +static void ab8500_irq_lock(struct irq_data *data) { - struct ab8500 *ab8500 = get_irq_chip_data(irq); + struct ab8500 *ab8500 = irq_data_get_irq_chip_data(data); mutex_lock(&ab8500->irq_lock); } -static void ab8500_irq_sync_unlock(unsigned int irq) +static void ab8500_irq_sync_unlock(struct irq_data *data) { - struct ab8500 *ab8500 = get_irq_chip_data(irq); + struct ab8500 *ab8500 = irq_data_get_irq_chip_data(data); int i; for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { @@ -261,20 +261,20 @@ static void ab8500_irq_sync_unlock(unsigned int irq) mutex_unlock(&ab8500->irq_lock); } -static void ab8500_irq_mask(unsigned int irq) +static void ab8500_irq_mask(struct irq_data *data) { - struct ab8500 *ab8500 = get_irq_chip_data(irq); - int offset = irq - ab8500->irq_base; + struct ab8500 *ab8500 = irq_data_get_irq_chip_data(data); + int offset = data->irq - ab8500->irq_base; int index = offset / 8; int mask = 1 << (offset % 8); ab8500->mask[index] |= mask; } -static void ab8500_irq_unmask(unsigned int irq) +static void ab8500_irq_unmask(struct irq_data *data) { - struct ab8500 *ab8500 = get_irq_chip_data(irq); - int offset = irq - ab8500->irq_base; + struct ab8500 *ab8500 = irq_data_get_irq_chip_data(data); + int offset = data->irq - ab8500->irq_base; int index = offset / 8; int mask = 1 << (offset % 8); @@ -283,10 +283,10 @@ static void ab8500_irq_unmask(unsigned int irq) static struct irq_chip ab8500_irq_chip = { .name = "ab8500", - .bus_lock = ab8500_irq_lock, - .bus_sync_unlock = ab8500_irq_sync_unlock, - .mask = ab8500_irq_mask, - .unmask = ab8500_irq_unmask, + .irq_bus_lock = ab8500_irq_lock, + .irq_bus_sync_unlock = ab8500_irq_sync_unlock, + .irq_mask = ab8500_irq_mask, + .irq_unmask = ab8500_irq_unmask, }; static irqreturn_t ab8500_irq(int irq, void *dev) -- cgit v1.2.1 From c232f22fc6aac1797d0ca9beddddf0fea4beb7f3 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 13 Dec 2010 13:30:09 +0100 Subject: mfd: Convert ezx-pcap to new irq_ methods Signed-off-by: Lennert Buytenhek Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/ezx-pcap.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c index 4f6742753c41..9e2d8dd5f9e5 100644 --- a/drivers/mfd/ezx-pcap.c +++ b/drivers/mfd/ezx-pcap.c @@ -144,26 +144,26 @@ int pcap_to_irq(struct pcap_chip *pcap, int irq) } EXPORT_SYMBOL_GPL(pcap_to_irq); -static void pcap_mask_irq(unsigned int irq) +static void pcap_mask_irq(struct irq_data *d) { - struct pcap_chip *pcap = get_irq_chip_data(irq); + struct pcap_chip *pcap = irq_data_get_irq_chip_data(d); - pcap->msr |= 1 << irq_to_pcap(pcap, irq); + pcap->msr |= 1 << irq_to_pcap(pcap, d->irq); queue_work(pcap->workqueue, &pcap->msr_work); } -static void pcap_unmask_irq(unsigned int irq) +static void pcap_unmask_irq(struct irq_data *d) { - struct pcap_chip *pcap = get_irq_chip_data(irq); + struct pcap_chip *pcap = irq_data_get_irq_chip_data(d); - pcap->msr &= ~(1 << irq_to_pcap(pcap, irq)); + pcap->msr &= ~(1 << irq_to_pcap(pcap, d->irq)); queue_work(pcap->workqueue, &pcap->msr_work); } static struct irq_chip pcap_irq_chip = { - .name = "pcap", - .mask = pcap_mask_irq, - .unmask = pcap_unmask_irq, + .name = "pcap", + .irq_mask = pcap_mask_irq, + .irq_unmask = pcap_unmask_irq, }; static void pcap_msr_work(struct work_struct *work) @@ -217,7 +217,7 @@ static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc) { struct pcap_chip *pcap = get_irq_data(irq); - desc->chip->ack(irq); + desc->irq_data.chip->irq_ack(&desc->irq_data); queue_work(pcap->workqueue, &pcap->isr_work); return; } -- cgit v1.2.1 From 949b9decaed059f25ed9639d3dbfe839972cf01b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 11 Dec 2010 16:43:59 +0000 Subject: mfd: Convert HTC EGPIO driver to irq_ API The genirq core is being converted to pass a struct irq_data to interrupt operations rather than an IRQ number. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/htc-egpio.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/htc-egpio.c b/drivers/mfd/htc-egpio.c index d3e74f8585e0..d00b6d1a69e5 100644 --- a/drivers/mfd/htc-egpio.c +++ b/drivers/mfd/htc-egpio.c @@ -70,31 +70,32 @@ static inline void ack_irqs(struct egpio_info *ei) ei->ack_write, ei->ack_register << ei->bus_shift); } -static void egpio_ack(unsigned int irq) +static void egpio_ack(struct irq_data *data) { } /* There does not appear to be a way to proactively mask interrupts * on the egpio chip itself. So, we simply ignore interrupts that * aren't desired. */ -static void egpio_mask(unsigned int irq) +static void egpio_mask(struct irq_data *data) { - struct egpio_info *ei = get_irq_chip_data(irq); - ei->irqs_enabled &= ~(1 << (irq - ei->irq_start)); - pr_debug("EGPIO mask %d %04x\n", irq, ei->irqs_enabled); + struct egpio_info *ei = irq_data_get_irq_chip_data(data); + ei->irqs_enabled &= ~(1 << (data->irq - ei->irq_start)); + pr_debug("EGPIO mask %d %04x\n", data->irq, ei->irqs_enabled); } -static void egpio_unmask(unsigned int irq) + +static void egpio_unmask(struct irq_data *data) { - struct egpio_info *ei = get_irq_chip_data(irq); - ei->irqs_enabled |= 1 << (irq - ei->irq_start); - pr_debug("EGPIO unmask %d %04x\n", irq, ei->irqs_enabled); + struct egpio_info *ei = irq_data_get_irq_chip_data(data); + ei->irqs_enabled |= 1 << (data->irq - ei->irq_start); + pr_debug("EGPIO unmask %d %04x\n", data->irq, ei->irqs_enabled); } static struct irq_chip egpio_muxed_chip = { - .name = "htc-egpio", - .ack = egpio_ack, - .mask = egpio_mask, - .unmask = egpio_unmask, + .name = "htc-egpio", + .irq_ack = egpio_ack, + .irq_mask = egpio_mask, + .irq_unmask = egpio_unmask, }; static void egpio_handler(unsigned int irq, struct irq_desc *desc) -- cgit v1.2.1 From e6a4c4a48a80ddfaa5abf59146e0beb5faa86fba Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 11 Dec 2010 16:44:11 +0000 Subject: mfd: Convert HTC I2C CPLD driver to irq_ API The genirq core is being converted to pass a struct irq_data to interrupt operations rather than an IRQ number. Signed-off-by: Mark Brown Acked-by: Cory Maccarrone Signed-off-by: Samuel Ortiz --- drivers/mfd/htc-i2cpld.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/htc-i2cpld.c b/drivers/mfd/htc-i2cpld.c index dd24355c9650..296ad1562f69 100644 --- a/drivers/mfd/htc-i2cpld.c +++ b/drivers/mfd/htc-i2cpld.c @@ -82,25 +82,25 @@ struct htcpld_data { /* There does not appear to be a way to proactively mask interrupts * on the htcpld chip itself. So, we simply ignore interrupts that * aren't desired. */ -static void htcpld_mask(unsigned int irq) +static void htcpld_mask(struct irq_data *data) { - struct htcpld_chip *chip = get_irq_chip_data(irq); - chip->irqs_enabled &= ~(1 << (irq - chip->irq_start)); - pr_debug("HTCPLD mask %d %04x\n", irq, chip->irqs_enabled); + struct htcpld_chip *chip = irq_data_get_irq_chip_data(data); + chip->irqs_enabled &= ~(1 << (data->irq - chip->irq_start)); + pr_debug("HTCPLD mask %d %04x\n", data->irq, chip->irqs_enabled); } -static void htcpld_unmask(unsigned int irq) +static void htcpld_unmask(struct irq_data *data) { - struct htcpld_chip *chip = get_irq_chip_data(irq); - chip->irqs_enabled |= 1 << (irq - chip->irq_start); - pr_debug("HTCPLD unmask %d %04x\n", irq, chip->irqs_enabled); + struct htcpld_chip *chip = irq_data_get_irq_chip_data(data); + chip->irqs_enabled |= 1 << (data->irq - chip->irq_start); + pr_debug("HTCPLD unmask %d %04x\n", data->irq, chip->irqs_enabled); } -static int htcpld_set_type(unsigned int irq, unsigned int flags) +static int htcpld_set_type(struct irq_data *data, unsigned int flags) { - struct irq_desc *d = irq_to_desc(irq); + struct irq_desc *d = irq_to_desc(data->irq); if (!d) { - pr_err("HTCPLD invalid IRQ: %d\n", irq); + pr_err("HTCPLD invalid IRQ: %d\n", data->irq); return -EINVAL; } @@ -118,10 +118,10 @@ static int htcpld_set_type(unsigned int irq, unsigned int flags) } static struct irq_chip htcpld_muxed_chip = { - .name = "htcpld", - .mask = htcpld_mask, - .unmask = htcpld_unmask, - .set_type = htcpld_set_type, + .name = "htcpld", + .irq_mask = htcpld_mask, + .irq_unmask = htcpld_unmask, + .irq_set_type = htcpld_set_type, }; /* To properly dispatch IRQ events, we need to read from the -- cgit v1.2.1 From 5af3bde8b264e78565b6d1963ba86bbf6c6b10f6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 12 Dec 2010 20:08:30 +0100 Subject: mfd: Convert jz4740-adc to new irq_ methods Convert the jz4740-adc driver to use the recently introduced IRQ API variants which are passed struct irq_data rather than an IRQ number. Signed-off-by: Mark Brown Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/jz4740-adc.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c index 9dd1b33f2275..0cc59795f600 100644 --- a/drivers/mfd/jz4740-adc.c +++ b/drivers/mfd/jz4740-adc.c @@ -84,31 +84,30 @@ static inline void jz4740_adc_irq_set_masked(struct jz4740_adc *adc, int irq, spin_unlock_irqrestore(&adc->lock, flags); } -static void jz4740_adc_irq_mask(unsigned int irq) +static void jz4740_adc_irq_mask(struct irq_data *data) { - struct jz4740_adc *adc = get_irq_chip_data(irq); - jz4740_adc_irq_set_masked(adc, irq, true); + struct jz4740_adc *adc = irq_data_get_irq_chip_data(data); + jz4740_adc_irq_set_masked(adc, data->irq, true); } -static void jz4740_adc_irq_unmask(unsigned int irq) +static void jz4740_adc_irq_unmask(struct irq_data *data) { - struct jz4740_adc *adc = get_irq_chip_data(irq); - jz4740_adc_irq_set_masked(adc, irq, false); + struct jz4740_adc *adc = irq_data_get_irq_chip_data(data); + jz4740_adc_irq_set_masked(adc, data->irq, false); } -static void jz4740_adc_irq_ack(unsigned int irq) +static void jz4740_adc_irq_ack(struct irq_data *data) { - struct jz4740_adc *adc = get_irq_chip_data(irq); - - irq -= adc->irq_base; + struct jz4740_adc *adc = irq_data_get_irq_chip_data(data); + unsigned int irq = data->irq - adc->irq_base; writeb(BIT(irq), adc->base + JZ_REG_ADC_STATUS); } static struct irq_chip jz4740_adc_irq_chip = { .name = "jz4740-adc", - .mask = jz4740_adc_irq_mask, - .unmask = jz4740_adc_irq_unmask, - .ack = jz4740_adc_irq_ack, + .irq_mask = jz4740_adc_irq_mask, + .irq_unmask = jz4740_adc_irq_unmask, + .irq_ack = jz4740_adc_irq_ack, }; static void jz4740_adc_irq_demux(unsigned int irq, struct irq_desc *desc) -- cgit v1.2.1 From 98d9bc13cd19e544e8ea15b97f5cfef166cc9294 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 11 Dec 2010 18:20:55 +0000 Subject: mfd: Convert max8925 to new irq_ API The genirq infrastructure is being converted to pass struct irq_data rather than an irq number to irq_chip operations, update max8925 to the new APIs. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/max8925-core.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c index 44695f5a1800..0e998dc4e7d8 100644 --- a/drivers/mfd/max8925-core.c +++ b/drivers/mfd/max8925-core.c @@ -407,16 +407,16 @@ static irqreturn_t max8925_tsc_irq(int irq, void *data) return IRQ_HANDLED; } -static void max8925_irq_lock(unsigned int irq) +static void max8925_irq_lock(struct irq_data *data) { - struct max8925_chip *chip = get_irq_chip_data(irq); + struct max8925_chip *chip = irq_data_get_irq_chip_data(data); mutex_lock(&chip->irq_lock); } -static void max8925_irq_sync_unlock(unsigned int irq) +static void max8925_irq_sync_unlock(struct irq_data *data) { - struct max8925_chip *chip = get_irq_chip_data(irq); + struct max8925_chip *chip = irq_data_get_irq_chip_data(data); struct max8925_irq_data *irq_data; static unsigned char cache_chg[2] = {0xff, 0xff}; static unsigned char cache_on[2] = {0xff, 0xff}; @@ -492,25 +492,25 @@ static void max8925_irq_sync_unlock(unsigned int irq) mutex_unlock(&chip->irq_lock); } -static void max8925_irq_enable(unsigned int irq) +static void max8925_irq_enable(struct irq_data *data) { - struct max8925_chip *chip = get_irq_chip_data(irq); - max8925_irqs[irq - chip->irq_base].enable - = max8925_irqs[irq - chip->irq_base].offs; + struct max8925_chip *chip = irq_data_get_irq_chip_data(data); + max8925_irqs[data->irq - chip->irq_base].enable + = max8925_irqs[data->irq - chip->irq_base].offs; } -static void max8925_irq_disable(unsigned int irq) +static void max8925_irq_disable(struct irq_data *data) { - struct max8925_chip *chip = get_irq_chip_data(irq); - max8925_irqs[irq - chip->irq_base].enable = 0; + struct max8925_chip *chip = irq_data_get_irq_chip_data(data); + max8925_irqs[data->irq - chip->irq_base].enable = 0; } static struct irq_chip max8925_irq_chip = { .name = "max8925", - .bus_lock = max8925_irq_lock, - .bus_sync_unlock = max8925_irq_sync_unlock, - .enable = max8925_irq_enable, - .disable = max8925_irq_disable, + .irq_bus_lock = max8925_irq_lock, + .irq_bus_sync_unlock = max8925_irq_sync_unlock, + .irq_enable = max8925_irq_enable, + .irq_disable = max8925_irq_disable, }; static int max8925_irq_init(struct max8925_chip *chip, int irq, -- cgit v1.2.1 From 2898577e160c7d60d2b11cb3b1c3b55d0e1468db Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 11 Dec 2010 18:31:03 +0000 Subject: mfd: Convert MAX8998 driver to irq_ API The genirq core is being updated to pass struct irq_data to interrupt operations, update the MAX8998 driver to the new API. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/max8998-irq.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/max8998-irq.c b/drivers/mfd/max8998-irq.c index 45bfe77b639b..c6b61fcc5808 100644 --- a/drivers/mfd/max8998-irq.c +++ b/drivers/mfd/max8998-irq.c @@ -102,16 +102,16 @@ irq_to_max8998_irq(struct max8998_dev *max8998, int irq) return &max8998_irqs[irq - max8998->irq_base]; } -static void max8998_irq_lock(unsigned int irq) +static void max8998_irq_lock(struct irq_data *data) { - struct max8998_dev *max8998 = get_irq_chip_data(irq); + struct max8998_dev *max8998 = irq_data_get_irq_chip_data(data); mutex_lock(&max8998->irqlock); } -static void max8998_irq_sync_unlock(unsigned int irq) +static void max8998_irq_sync_unlock(struct irq_data *data) { - struct max8998_dev *max8998 = get_irq_chip_data(irq); + struct max8998_dev *max8998 = irq_data_get_irq_chip_data(data); int i; for (i = 0; i < ARRAY_SIZE(max8998->irq_masks_cur); i++) { @@ -129,28 +129,30 @@ static void max8998_irq_sync_unlock(unsigned int irq) mutex_unlock(&max8998->irqlock); } -static void max8998_irq_unmask(unsigned int irq) +static void max8998_irq_unmask(struct irq_data *data) { - struct max8998_dev *max8998 = get_irq_chip_data(irq); - struct max8998_irq_data *irq_data = irq_to_max8998_irq(max8998, irq); + struct max8998_dev *max8998 = irq_data_get_irq_chip_data(data); + struct max8998_irq_data *irq_data = irq_to_max8998_irq(max8998, + data->irq); max8998->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask; } -static void max8998_irq_mask(unsigned int irq) +static void max8998_irq_mask(struct irq_data *data) { - struct max8998_dev *max8998 = get_irq_chip_data(irq); - struct max8998_irq_data *irq_data = irq_to_max8998_irq(max8998, irq); + struct max8998_dev *max8998 = irq_data_get_irq_chip_data(data); + struct max8998_irq_data *irq_data = irq_to_max8998_irq(max8998, + data->irq); max8998->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask; } static struct irq_chip max8998_irq_chip = { .name = "max8998", - .bus_lock = max8998_irq_lock, - .bus_sync_unlock = max8998_irq_sync_unlock, - .mask = max8998_irq_mask, - .unmask = max8998_irq_unmask, + .irq_bus_lock = max8998_irq_lock, + .irq_bus_sync_unlock = max8998_irq_sync_unlock, + .irq_mask = max8998_irq_mask, + .irq_unmask = max8998_irq_unmask, }; static irqreturn_t max8998_irq_thread(int irq, void *data) -- cgit v1.2.1 From 43b8c08402de2fb85cd18ebc746b598ce2473664 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 12 Dec 2010 12:01:08 +0000 Subject: mfd: Convert SMTPE driver to new irq_ APIs The genirq core is being updated to supply struct irq_data to irq_chip operations rather than an irq number. Update the SMTPE driver to the new APIs. Signed-off-by: Mark Brown Acked-by: Rabin Vincent Signed-off-by: Samuel Ortiz --- drivers/mfd/stmpe.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index b11487f1e1cb..3e5732b58c49 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -699,16 +699,16 @@ static irqreturn_t stmpe_irq(int irq, void *data) return IRQ_HANDLED; } -static void stmpe_irq_lock(unsigned int irq) +static void stmpe_irq_lock(struct irq_data *data) { - struct stmpe *stmpe = get_irq_chip_data(irq); + struct stmpe *stmpe = irq_data_get_irq_chip_data(data); mutex_lock(&stmpe->irq_lock); } -static void stmpe_irq_sync_unlock(unsigned int irq) +static void stmpe_irq_sync_unlock(struct irq_data *data) { - struct stmpe *stmpe = get_irq_chip_data(irq); + struct stmpe *stmpe = irq_data_get_irq_chip_data(data); struct stmpe_variant_info *variant = stmpe->variant; int num = DIV_ROUND_UP(variant->num_irqs, 8); int i; @@ -727,20 +727,20 @@ static void stmpe_irq_sync_unlock(unsigned int irq) mutex_unlock(&stmpe->irq_lock); } -static void stmpe_irq_mask(unsigned int irq) +static void stmpe_irq_mask(struct irq_data *data) { - struct stmpe *stmpe = get_irq_chip_data(irq); - int offset = irq - stmpe->irq_base; + struct stmpe *stmpe = irq_data_get_irq_chip_data(data); + int offset = data->irq - stmpe->irq_base; int regoffset = offset / 8; int mask = 1 << (offset % 8); stmpe->ier[regoffset] &= ~mask; } -static void stmpe_irq_unmask(unsigned int irq) +static void stmpe_irq_unmask(struct irq_data *data) { - struct stmpe *stmpe = get_irq_chip_data(irq); - int offset = irq - stmpe->irq_base; + struct stmpe *stmpe = irq_data_get_irq_chip_data(data); + int offset = data->irq - stmpe->irq_base; int regoffset = offset / 8; int mask = 1 << (offset % 8); @@ -749,10 +749,10 @@ static void stmpe_irq_unmask(unsigned int irq) static struct irq_chip stmpe_irq_chip = { .name = "stmpe", - .bus_lock = stmpe_irq_lock, - .bus_sync_unlock = stmpe_irq_sync_unlock, - .mask = stmpe_irq_mask, - .unmask = stmpe_irq_unmask, + .irq_bus_lock = stmpe_irq_lock, + .irq_bus_sync_unlock = stmpe_irq_sync_unlock, + .irq_mask = stmpe_irq_mask, + .irq_unmask = stmpe_irq_unmask, }; static int __devinit stmpe_irq_init(struct stmpe *stmpe) -- cgit v1.2.1 From a4e7feadcc2aa5754f5ebfe67b9f07b5fddede51 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 12 Dec 2010 12:18:58 +0000 Subject: mfd: Convert t7166xb driver to new irq_ API The genirq core is being updated to pass struct irq_data rather than an irq number to irq_chip operations. Update the t7166xb driver to the new APIs. Signed-off-by: Mark Brown Acked-by: Ian Molton Signed-off-by: Samuel Ortiz --- drivers/mfd/t7l66xb.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c index 006c121f3f0d..9caeb4ac6ea6 100644 --- a/drivers/mfd/t7l66xb.c +++ b/drivers/mfd/t7l66xb.c @@ -199,37 +199,37 @@ static void t7l66xb_irq(unsigned int irq, struct irq_desc *desc) generic_handle_irq(irq_base + i); } -static void t7l66xb_irq_mask(unsigned int irq) +static void t7l66xb_irq_mask(struct irq_data *data) { - struct t7l66xb *t7l66xb = get_irq_chip_data(irq); + struct t7l66xb *t7l66xb = irq_data_get_irq_chip_data(data); unsigned long flags; u8 imr; spin_lock_irqsave(&t7l66xb->lock, flags); imr = tmio_ioread8(t7l66xb->scr + SCR_IMR); - imr |= 1 << (irq - t7l66xb->irq_base); + imr |= 1 << (data->irq - t7l66xb->irq_base); tmio_iowrite8(imr, t7l66xb->scr + SCR_IMR); spin_unlock_irqrestore(&t7l66xb->lock, flags); } -static void t7l66xb_irq_unmask(unsigned int irq) +static void t7l66xb_irq_unmask(struct irq_data *data) { - struct t7l66xb *t7l66xb = get_irq_chip_data(irq); + struct t7l66xb *t7l66xb = irq_data_get_irq_chip_data(data); unsigned long flags; u8 imr; spin_lock_irqsave(&t7l66xb->lock, flags); imr = tmio_ioread8(t7l66xb->scr + SCR_IMR); - imr &= ~(1 << (irq - t7l66xb->irq_base)); + imr &= ~(1 << (data->irq - t7l66xb->irq_base)); tmio_iowrite8(imr, t7l66xb->scr + SCR_IMR); spin_unlock_irqrestore(&t7l66xb->lock, flags); } static struct irq_chip t7l66xb_chip = { - .name = "t7l66xb", - .ack = t7l66xb_irq_mask, - .mask = t7l66xb_irq_mask, - .unmask = t7l66xb_irq_unmask, + .name = "t7l66xb", + .irq_ack = t7l66xb_irq_mask, + .irq_mask = t7l66xb_irq_mask, + .irq_unmask = t7l66xb_irq_unmask, }; /*--------------------------------------------------------------------------*/ -- cgit v1.2.1 From 01af22eb15e46488cf3de67f6d2222c2eed5f763 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 12 Dec 2010 12:34:04 +0000 Subject: mfd: Convert tc6393xb driver to new irq_ APIs The genirq core is being update to pass struct irq_data to irq_chip rather than an irq number to operations. Update tc6393 to the new API. Signed-off-by: Mark Brown Acked-by: Ian Molton Signed-off-by: Samuel Ortiz --- drivers/mfd/tc6393xb.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c index 1ea80d8ad915..9a238633a54d 100644 --- a/drivers/mfd/tc6393xb.c +++ b/drivers/mfd/tc6393xb.c @@ -527,41 +527,41 @@ tc6393xb_irq(unsigned int irq, struct irq_desc *desc) } } -static void tc6393xb_irq_ack(unsigned int irq) +static void tc6393xb_irq_ack(struct irq_data *data) { } -static void tc6393xb_irq_mask(unsigned int irq) +static void tc6393xb_irq_mask(struct irq_data *data) { - struct tc6393xb *tc6393xb = get_irq_chip_data(irq); + struct tc6393xb *tc6393xb = irq_data_get_irq_chip_data(data); unsigned long flags; u8 imr; spin_lock_irqsave(&tc6393xb->lock, flags); imr = tmio_ioread8(tc6393xb->scr + SCR_IMR); - imr |= 1 << (irq - tc6393xb->irq_base); + imr |= 1 << (data->irq - tc6393xb->irq_base); tmio_iowrite8(imr, tc6393xb->scr + SCR_IMR); spin_unlock_irqrestore(&tc6393xb->lock, flags); } -static void tc6393xb_irq_unmask(unsigned int irq) +static void tc6393xb_irq_unmask(struct irq_data *data) { - struct tc6393xb *tc6393xb = get_irq_chip_data(irq); + struct tc6393xb *tc6393xb = irq_data_get_irq_chip_data(data); unsigned long flags; u8 imr; spin_lock_irqsave(&tc6393xb->lock, flags); imr = tmio_ioread8(tc6393xb->scr + SCR_IMR); - imr &= ~(1 << (irq - tc6393xb->irq_base)); + imr &= ~(1 << (data->irq - tc6393xb->irq_base)); tmio_iowrite8(imr, tc6393xb->scr + SCR_IMR); spin_unlock_irqrestore(&tc6393xb->lock, flags); } static struct irq_chip tc6393xb_chip = { - .name = "tc6393xb", - .ack = tc6393xb_irq_ack, - .mask = tc6393xb_irq_mask, - .unmask = tc6393xb_irq_unmask, + .name = "tc6393xb", + .irq_ack = tc6393xb_irq_ack, + .irq_mask = tc6393xb_irq_mask, + .irq_unmask = tc6393xb_irq_unmask, }; static void tc6393xb_attach_irq(struct platform_device *dev) -- cgit v1.2.1 From 96e824bdf3349a7e581004286274be6c0df6c710 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 12 Dec 2010 12:39:28 +0000 Subject: mfd: Convert tps6586x driver to new irq_ API The genirq core is being updated to supply struct irq_data to irq_chip operations rather than an irq number. Update the tps6586x driver to the new APIs. Signed-off-by: Mark Brown Acked-by: Mike Rapoport Signed-off-by: Samuel Ortiz --- drivers/mfd/tps6586x.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index 35757399add0..627cf577b16d 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -323,37 +323,37 @@ static int tps6586x_remove_subdevs(struct tps6586x *tps6586x) return device_for_each_child(tps6586x->dev, NULL, __remove_subdev); } -static void tps6586x_irq_lock(unsigned int irq) +static void tps6586x_irq_lock(struct irq_data *data) { - struct tps6586x *tps6586x = get_irq_chip_data(irq); + struct tps6586x *tps6586x = irq_data_get_irq_chip_data(data); mutex_lock(&tps6586x->irq_lock); } -static void tps6586x_irq_enable(unsigned int irq) +static void tps6586x_irq_enable(struct irq_data *irq_data) { - struct tps6586x *tps6586x = get_irq_chip_data(irq); - unsigned int __irq = irq - tps6586x->irq_base; + struct tps6586x *tps6586x = irq_data_get_irq_chip_data(irq_data); + unsigned int __irq = irq_data->irq - tps6586x->irq_base; const struct tps6586x_irq_data *data = &tps6586x_irqs[__irq]; tps6586x->mask_reg[data->mask_reg] &= ~data->mask_mask; tps6586x->irq_en |= (1 << __irq); } -static void tps6586x_irq_disable(unsigned int irq) +static void tps6586x_irq_disable(struct irq_data *irq_data) { - struct tps6586x *tps6586x = get_irq_chip_data(irq); + struct tps6586x *tps6586x = irq_data_get_irq_chip_data(irq_data); - unsigned int __irq = irq - tps6586x->irq_base; + unsigned int __irq = irq_data->irq - tps6586x->irq_base; const struct tps6586x_irq_data *data = &tps6586x_irqs[__irq]; tps6586x->mask_reg[data->mask_reg] |= data->mask_mask; tps6586x->irq_en &= ~(1 << __irq); } -static void tps6586x_irq_sync_unlock(unsigned int irq) +static void tps6586x_irq_sync_unlock(struct irq_data *data) { - struct tps6586x *tps6586x = get_irq_chip_data(irq); + struct tps6586x *tps6586x = irq_data_get_irq_chip_data(data); int i; for (i = 0; i < ARRAY_SIZE(tps6586x->mask_reg); i++) { @@ -419,10 +419,10 @@ static int __devinit tps6586x_irq_init(struct tps6586x *tps6586x, int irq, tps6586x->irq_base = irq_base; tps6586x->irq_chip.name = "tps6586x"; - tps6586x->irq_chip.enable = tps6586x_irq_enable; - tps6586x->irq_chip.disable = tps6586x_irq_disable; - tps6586x->irq_chip.bus_lock = tps6586x_irq_lock; - tps6586x->irq_chip.bus_sync_unlock = tps6586x_irq_sync_unlock; + tps6586x->irq_chip.irq_enable = tps6586x_irq_enable; + tps6586x->irq_chip.irq_disable = tps6586x_irq_disable; + tps6586x->irq_chip.irq_bus_lock = tps6586x_irq_lock; + tps6586x->irq_chip.irq_bus_sync_unlock = tps6586x_irq_sync_unlock; for (i = 0; i < ARRAY_SIZE(tps6586x_irqs); i++) { int __irq = i + tps6586x->irq_base; -- cgit v1.2.1 From 845aeab5f1e0ef1a85b618a1bf917520a62a9c02 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 12 Dec 2010 12:51:39 +0000 Subject: mfd: Convert TWL4030 to new irq_ APIs The genirq core is being updated to pass struct irq_data to irq_chip operations. Update the TWL4030 driver to the new APIs. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/twl4030-irq.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index 5d3a1478004b..63a30e88908f 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -599,38 +599,38 @@ static void twl4030_sih_do_edge(struct work_struct *work) * completion, potentially including some re-ordering, of these requests. */ -static void twl4030_sih_mask(unsigned irq) +static void twl4030_sih_mask(struct irq_data *data) { - struct sih_agent *sih = get_irq_chip_data(irq); + struct sih_agent *sih = irq_data_get_irq_chip_data(data); unsigned long flags; spin_lock_irqsave(&sih_agent_lock, flags); - sih->imr |= BIT(irq - sih->irq_base); + sih->imr |= BIT(data->irq - sih->irq_base); sih->imr_change_pending = true; queue_work(wq, &sih->mask_work); spin_unlock_irqrestore(&sih_agent_lock, flags); } -static void twl4030_sih_unmask(unsigned irq) +static void twl4030_sih_unmask(struct irq_data *data) { - struct sih_agent *sih = get_irq_chip_data(irq); + struct sih_agent *sih = irq_data_get_irq_chip_data(data); unsigned long flags; spin_lock_irqsave(&sih_agent_lock, flags); - sih->imr &= ~BIT(irq - sih->irq_base); + sih->imr &= ~BIT(data->irq - sih->irq_base); sih->imr_change_pending = true; queue_work(wq, &sih->mask_work); spin_unlock_irqrestore(&sih_agent_lock, flags); } -static int twl4030_sih_set_type(unsigned irq, unsigned trigger) +static int twl4030_sih_set_type(struct irq_data *data, unsigned trigger) { - struct sih_agent *sih = get_irq_chip_data(irq); - struct irq_desc *desc = irq_to_desc(irq); + struct sih_agent *sih = irq_data_get_irq_chip_data(data); + struct irq_desc *desc = irq_to_desc(data->irq); unsigned long flags; if (!desc) { - pr_err("twl4030: Invalid IRQ: %d\n", irq); + pr_err("twl4030: Invalid IRQ: %d\n", data->irq); return -EINVAL; } @@ -641,7 +641,7 @@ static int twl4030_sih_set_type(unsigned irq, unsigned trigger) if ((desc->status & IRQ_TYPE_SENSE_MASK) != trigger) { desc->status &= ~IRQ_TYPE_SENSE_MASK; desc->status |= trigger; - sih->edge_change |= BIT(irq - sih->irq_base); + sih->edge_change |= BIT(data->irq - sih->irq_base); queue_work(wq, &sih->edge_work); } spin_unlock_irqrestore(&sih_agent_lock, flags); @@ -650,9 +650,9 @@ static int twl4030_sih_set_type(unsigned irq, unsigned trigger) static struct irq_chip twl4030_sih_irq_chip = { .name = "twl4030", - .mask = twl4030_sih_mask, - .unmask = twl4030_sih_unmask, - .set_type = twl4030_sih_set_type, + .irq_mask = twl4030_sih_mask, + .irq_unmask = twl4030_sih_unmask, + .irq_set_type = twl4030_sih_set_type, }; /*----------------------------------------------------------------------*/ -- cgit v1.2.1 From 25a947f805b4132b69f2561589e17a0fe45552b6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 11 Dec 2010 13:21:21 +0000 Subject: mfd: Convert Wolfson MFD drivers to use irq_data accessor function Actually makes the code larger rathe rthan smaller but does provide some isolation against core API changes. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-irq.c | 10 +++++----- drivers/mfd/wm8350-irq.c | 8 ++++---- drivers/mfd/wm8994-irq.c | 8 ++++---- 3 files changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c index eae52726bf3e..ee88f6a05cec 100644 --- a/drivers/mfd/wm831x-irq.c +++ b/drivers/mfd/wm831x-irq.c @@ -347,14 +347,14 @@ static inline struct wm831x_irq_data *irq_to_wm831x_irq(struct wm831x *wm831x, static void wm831x_irq_lock(struct irq_data *data) { - struct wm831x *wm831x = data->chip_data; + struct wm831x *wm831x = irq_data_get_irq_chip_data(data); mutex_lock(&wm831x->irq_lock); } static void wm831x_irq_sync_unlock(struct irq_data *data) { - struct wm831x *wm831x = data->chip_data; + struct wm831x *wm831x = irq_data_get_irq_chip_data(data); int i; for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks_cur); i++) { @@ -373,7 +373,7 @@ static void wm831x_irq_sync_unlock(struct irq_data *data) static void wm831x_irq_unmask(struct irq_data *data) { - struct wm831x *wm831x = data->chip_data; + struct wm831x *wm831x = irq_data_get_irq_chip_data(data); struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x, data->irq); @@ -382,7 +382,7 @@ static void wm831x_irq_unmask(struct irq_data *data) static void wm831x_irq_mask(struct irq_data *data) { - struct wm831x *wm831x = data->chip_data; + struct wm831x *wm831x = irq_data_get_irq_chip_data(data); struct wm831x_irq_data *irq_data = irq_to_wm831x_irq(wm831x, data->irq); @@ -391,7 +391,7 @@ static void wm831x_irq_mask(struct irq_data *data) static int wm831x_irq_set_type(struct irq_data *data, unsigned int type) { - struct wm831x *wm831x = data->chip_data; + struct wm831x *wm831x = irq_data_get_irq_chip_data(data); int val, irq; irq = data->irq - wm831x->irq_base; diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c index ba966ae88dc3..5839966ebd85 100644 --- a/drivers/mfd/wm8350-irq.c +++ b/drivers/mfd/wm8350-irq.c @@ -419,14 +419,14 @@ static irqreturn_t wm8350_irq(int irq, void *irq_data) static void wm8350_irq_lock(struct irq_data *data) { - struct wm8350 *wm8350 = data->chip_data; + struct wm8350 *wm8350 = irq_data_get_irq_chip_data(data); mutex_lock(&wm8350->irq_lock); } static void wm8350_irq_sync_unlock(struct irq_data *data) { - struct wm8350 *wm8350 = data->chip_data; + struct wm8350 *wm8350 = irq_data_get_irq_chip_data(data); int i; for (i = 0; i < ARRAY_SIZE(wm8350->irq_masks); i++) { @@ -444,7 +444,7 @@ static void wm8350_irq_sync_unlock(struct irq_data *data) static void wm8350_irq_enable(struct irq_data *data) { - struct wm8350 *wm8350 = data->chip_data; + struct wm8350 *wm8350 = irq_data_get_irq_chip_data(data); struct wm8350_irq_data *irq_data = irq_to_wm8350_irq(wm8350, data->irq); @@ -453,7 +453,7 @@ static void wm8350_irq_enable(struct irq_data *data) static void wm8350_irq_disable(struct irq_data *data) { - struct wm8350 *wm8350 = data->chip_data; + struct wm8350 *wm8350 = irq_data_get_irq_chip_data(data); struct wm8350_irq_data *irq_data = irq_to_wm8350_irq(wm8350, data->irq); diff --git a/drivers/mfd/wm8994-irq.c b/drivers/mfd/wm8994-irq.c index 62598840ad04..29e8faf9c01c 100644 --- a/drivers/mfd/wm8994-irq.c +++ b/drivers/mfd/wm8994-irq.c @@ -158,14 +158,14 @@ static inline struct wm8994_irq_data *irq_to_wm8994_irq(struct wm8994 *wm8994, static void wm8994_irq_lock(struct irq_data *data) { - struct wm8994 *wm8994 = data->chip_data; + struct wm8994 *wm8994 = irq_data_get_irq_chip_data(data); mutex_lock(&wm8994->irq_lock); } static void wm8994_irq_sync_unlock(struct irq_data *data) { - struct wm8994 *wm8994 = data->chip_data; + struct wm8994 *wm8994 = irq_data_get_irq_chip_data(data); int i; for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) { @@ -184,7 +184,7 @@ static void wm8994_irq_sync_unlock(struct irq_data *data) static void wm8994_irq_unmask(struct irq_data *data) { - struct wm8994 *wm8994 = data->chip_data; + struct wm8994 *wm8994 = irq_data_get_irq_chip_data(data); struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994, data->irq); @@ -193,7 +193,7 @@ static void wm8994_irq_unmask(struct irq_data *data) static void wm8994_irq_mask(struct irq_data *data) { - struct wm8994 *wm8994 = data->chip_data; + struct wm8994 *wm8994 = irq_data_get_irq_chip_data(data); struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994, data->irq); -- cgit v1.2.1 From 7eb19812eead8d0faf30682b69970b36dc02e570 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 20 Dec 2010 11:26:19 +0100 Subject: misc: Fix cs5535 printk warnings drivers/misc/cs5535-mfgpt.c: In function 'cs5535_mfgpt_probe': drivers/misc/cs5535-mfgpt.c:320: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'resource_size_t' drivers/misc/cs5535-mfgpt.c:320: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'resource_size_t' Use vsprintf extension %pR to format resource. Original-patch-by: Randy Dunlap Signed-off-by: Joe Perches Signed-off-by: Samuel Ortiz --- drivers/misc/cs5535-mfgpt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c index 26693060b29b..d02d302ee6d5 100644 --- a/drivers/misc/cs5535-mfgpt.c +++ b/drivers/misc/cs5535-mfgpt.c @@ -317,8 +317,7 @@ static int __devinit cs5535_mfgpt_probe(struct platform_device *pdev) cs5535_mfgpt_chip.pdev = pdev; spin_lock_init(&cs5535_mfgpt_chip.lock); - dev_info(&pdev->dev, "region 0x%x - 0x%x reserved\n", res->start, - res->end); + dev_info(&pdev->dev, "reserved resource region %pR\n", res); /* detect the available timers */ t = scan_timers(&cs5535_mfgpt_chip); -- cgit v1.2.1 From 1db0b427eec6f18477fa95aab8edf6176dffcea4 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 20 Dec 2010 11:28:40 +0100 Subject: gpio: Fix cs5535 printk warnings drivers/gpio/cs5535-gpio.c: In function 'cs5535_gpio_probe': drivers/gpio/cs5535-gpio.c:269: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'resource_size_t' drivers/gpio/cs5535-gpio.c:269: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'resource_size_t' Use vsprintf extension %pR to format resource. Original-patch-by: Randy Dunlap Signed-off-by: Joe Perches Signed-off-by: Samuel Ortiz --- drivers/gpio/cs5535-gpio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c index f9813ef48534..0d05ea7d499b 100644 --- a/drivers/gpio/cs5535-gpio.c +++ b/drivers/gpio/cs5535-gpio.c @@ -329,8 +329,7 @@ static int __devinit cs5535_gpio_probe(struct platform_device *pdev) cs5535_gpio_chip.pdev = pdev; spin_lock_init(&cs5535_gpio_chip.lock); - dev_info(&pdev->dev, "region 0x%x - 0x%x reserved\n", - res->start, res->end); + dev_info(&pdev->dev, "reserved resource region %pR\n", res); /* mask out reserved pins */ mask &= 0x1F7FFFFF; -- cgit v1.2.1 From c45c685c1a582e27787b5aa85844f2ee6986018c Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 13 Dec 2010 13:31:18 +0100 Subject: mfd: twl6030 irq_data conversion. Signed-off-by: Lennert Buytenhek Acked-by: Santosh Shilimkar Signed-off-by: Samuel Ortiz --- drivers/mfd/twl6030-irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c index 06c8955907e9..4082ed73613f 100644 --- a/drivers/mfd/twl6030-irq.c +++ b/drivers/mfd/twl6030-irq.c @@ -332,7 +332,7 @@ int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) */ twl6030_irq_chip = dummy_irq_chip; twl6030_irq_chip.name = "twl6030"; - twl6030_irq_chip.set_type = NULL; + twl6030_irq_chip.irq_set_type = NULL; for (i = irq_base; i < irq_end; i++) { set_irq_chip_and_handler(i, &twl6030_irq_chip, -- cgit v1.2.1 From 3ec33012dc07ab7e12fdd3f7f927c09264dcb5ec Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 20 Dec 2010 10:02:06 +0800 Subject: mfd: Add __devexit annotation for vx855_remove Signed-off-by: Axel Lin Acked-by: Harald Welte Signed-off-by: Samuel Ortiz --- drivers/mfd/vx855.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/vx855.c b/drivers/mfd/vx855.c index ebb059765edd..348052aa5dbf 100644 --- a/drivers/mfd/vx855.c +++ b/drivers/mfd/vx855.c @@ -112,7 +112,7 @@ out: return ret; } -static void vx855_remove(struct pci_dev *pdev) +static void __devexit vx855_remove(struct pci_dev *pdev) { mfd_remove_devices(&pdev->dev); pci_disable_device(pdev); -- cgit v1.2.1 From b14375800751da9fcd63ec11d39a86077f214dc2 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Dec 2010 12:28:11 +0000 Subject: misc: Make AB8500_PWM driver depend on U8500 due to PWM breakage Since we don't have a PWM API every PWM driver ends up exporting its own version and we need to limit the platforms we try to build them on in order to avoid multiple definitions. As the AB8500 is normally a companion chip for the U8500 CPU depend on that architecture. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/misc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 1e1a4be8eb6c..cc8e49db45fe 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -64,7 +64,7 @@ config ATMEL_PWM config AB8500_PWM bool "AB8500 PWM support" - depends on AB8500_CORE + depends on AB8500_CORE && ARCH_U8500 select HAVE_PWM help This driver exports functions to enable/disble/config/free Pulse -- cgit v1.2.1 From 1d83864cab272f764beb381bbd3837f91fc0abed Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 11 Dec 2010 13:07:49 +0000 Subject: mfd: Remove ARCH_U8500 dependency from AB8500 While it is vanishingly unlikely that the device will be deployed on other architectures removing the dependency facilitates build testing when doing generic work on both the MFD core for the device and the subsystem drivers. There appears to be no actual code dependency. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b5e3e09f5637..c32b62a8a1f6 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -496,7 +496,7 @@ config EZX_PCAP config AB8500_CORE bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" - depends on GENERIC_HARDIRQS && ABX500_CORE && SPI_MASTER && ARCH_U8500 + depends on GENERIC_HARDIRQS && ABX500_CORE && SPI_MASTER select MFD_CORE help Select this option to enable access to AB8500 power management -- cgit v1.2.1 From 6680d940b80dbb0617226c5b76b071a3977feb1c Mon Sep 17 00:00:00 2001 From: Sundar Iyer Date: Fri, 24 Dec 2010 11:52:08 +0100 Subject: mfd/ab8500: remove spi support Since the Ab8500 v1.0, the SPI support is deprecated on the HW. Signed-off-by: Sundar Iyer Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 8 +-- drivers/mfd/Makefile | 2 +- drivers/mfd/ab8500-spi.c | 143 ----------------------------------------------- 3 files changed, 5 insertions(+), 148 deletions(-) delete mode 100644 drivers/mfd/ab8500-spi.c (limited to 'drivers') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index c32b62a8a1f6..fd018366d670 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -496,13 +496,13 @@ config EZX_PCAP config AB8500_CORE bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" - depends on GENERIC_HARDIRQS && ABX500_CORE && SPI_MASTER + depends on GENERIC_HARDIRQS && ABX500_CORE select MFD_CORE help Select this option to enable access to AB8500 power management - chip. This connects to U8500 either on the SSP/SPI bus - or the I2C bus via PRCMU. It also adds the irq_chip - parts for handling the Mixed Signal chip events. + chip. This connects to U8500 either on the SSP/SPI bus (deprecated + since hardware version v1.0) or the I2C bus via PRCMU. It also adds + the irq_chip parts for handling the Mixed Signal chip events. This chip embeds various other multimedia funtionalities as well. config AB8500_I2C_CORE diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 5f35de9386e3..a54e2c7c6a1c 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -70,7 +70,7 @@ obj-$(CONFIG_ABX500_CORE) += abx500-core.o obj-$(CONFIG_AB3100_CORE) += ab3100-core.o obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o obj-$(CONFIG_AB3550_CORE) += ab3550-core.o -obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-spi.o +obj-$(CONFIG_AB8500_CORE) += ab8500-core.o obj-$(CONFIG_AB8500_I2C_CORE) += ab8500-i2c.o obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o diff --git a/drivers/mfd/ab8500-spi.c b/drivers/mfd/ab8500-spi.c deleted file mode 100644 index b1653421edb5..000000000000 --- a/drivers/mfd/ab8500-spi.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * Author: Srinidhi Kasagar - */ - -#include -#include -#include -#include -#include -#include -#include - -/* - * This funtion writes to any AB8500 registers using - * SPI protocol & before it writes it packs the data - * in the below 24 bit frame format - * - * *|------------------------------------| - * *| 23|22...18|17.......10|9|8|7......0| - * *| r/w bank adr data | - * * ------------------------------------ - * - * This function shouldn't be called from interrupt - * context - */ -static int ab8500_spi_write(struct ab8500 *ab8500, u16 addr, u8 data) -{ - struct spi_device *spi = container_of(ab8500->dev, struct spi_device, - dev); - unsigned long spi_data = addr << 10 | data; - struct spi_transfer xfer; - struct spi_message msg; - - ab8500->tx_buf[0] = spi_data; - ab8500->rx_buf[0] = 0; - - xfer.tx_buf = ab8500->tx_buf; - xfer.rx_buf = NULL; - xfer.len = sizeof(unsigned long); - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - - return spi_sync(spi, &msg); -} - -static int ab8500_spi_read(struct ab8500 *ab8500, u16 addr) -{ - struct spi_device *spi = container_of(ab8500->dev, struct spi_device, - dev); - unsigned long spi_data = 1 << 23 | addr << 10; - struct spi_transfer xfer; - struct spi_message msg; - int ret; - - ab8500->tx_buf[0] = spi_data; - ab8500->rx_buf[0] = 0; - - xfer.tx_buf = ab8500->tx_buf; - xfer.rx_buf = ab8500->rx_buf; - xfer.len = sizeof(unsigned long); - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); - - ret = spi_sync(spi, &msg); - if (!ret) - /* - * Only the 8 lowermost bytes are - * defined with value, the rest may - * vary depending on chip/board noise. - */ - ret = ab8500->rx_buf[0] & 0xFFU; - - return ret; -} - -static int __devinit ab8500_spi_probe(struct spi_device *spi) -{ - struct ab8500 *ab8500; - int ret; - - spi->bits_per_word = 24; - ret = spi_setup(spi); - if (ret < 0) - return ret; - - ab8500 = kzalloc(sizeof *ab8500, GFP_KERNEL); - if (!ab8500) - return -ENOMEM; - - ab8500->dev = &spi->dev; - ab8500->irq = spi->irq; - - ab8500->read = ab8500_spi_read; - ab8500->write = ab8500_spi_write; - - spi_set_drvdata(spi, ab8500); - - ret = ab8500_init(ab8500); - if (ret) - kfree(ab8500); - - return ret; -} - -static int __devexit ab8500_spi_remove(struct spi_device *spi) -{ - struct ab8500 *ab8500 = spi_get_drvdata(spi); - - ab8500_exit(ab8500); - kfree(ab8500); - - return 0; -} - -static struct spi_driver ab8500_spi_driver = { - .driver = { - .name = "ab8500-spi", - .owner = THIS_MODULE, - }, - .probe = ab8500_spi_probe, - .remove = __devexit_p(ab8500_spi_remove) -}; - -static int __init ab8500_spi_init(void) -{ - return spi_register_driver(&ab8500_spi_driver); -} -subsys_initcall(ab8500_spi_init); - -static void __exit ab8500_spi_exit(void) -{ - spi_unregister_driver(&ab8500_spi_driver); -} -module_exit(ab8500_spi_exit); - -MODULE_AUTHOR("Srinidhi KASAGAR Date: Thu, 23 Dec 2010 17:53:36 +0900 Subject: mfd: MAX8998/LP3974 hibernation support This patch makes the driver to save and restore register values for hibernation. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Samuel Ortiz --- drivers/mfd/max8998-irq.c | 7 +++ drivers/mfd/max8998.c | 108 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 115 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/max8998-irq.c b/drivers/mfd/max8998-irq.c index c6b61fcc5808..3903e1fbb334 100644 --- a/drivers/mfd/max8998-irq.c +++ b/drivers/mfd/max8998-irq.c @@ -183,6 +183,13 @@ static irqreturn_t max8998_irq_thread(int irq, void *data) return IRQ_HANDLED; } +int max8998_irq_resume(struct max8998_dev *max8998) +{ + if (max8998->irq && max8998->irq_base) + max8998_irq_thread(max8998->irq_base, max8998); + return 0; +} + int max8998_irq_init(struct max8998_dev *max8998) { int i; diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c index bb9977bebe78..5ce00ad5241a 100644 --- a/drivers/mfd/max8998.c +++ b/drivers/mfd/max8998.c @@ -25,6 +25,8 @@ #include #include #include +#include +#include #include #include #include @@ -135,6 +137,7 @@ static int max8998_i2c_probe(struct i2c_client *i2c, if (pdata) { max8998->ono = pdata->ono; max8998->irq_base = pdata->irq_base; + max8998->wakeup = pdata->wakeup; } mutex_init(&max8998->iolock); @@ -146,6 +149,8 @@ static int max8998_i2c_probe(struct i2c_client *i2c, ret = mfd_add_devices(max8998->dev, -1, max8998_devs, ARRAY_SIZE(max8998_devs), NULL, 0); + pm_runtime_set_active(max8998->dev); + if (ret < 0) goto err; @@ -178,10 +183,113 @@ static const struct i2c_device_id max8998_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, max8998_i2c_id); +static int max8998_suspend(struct device *dev) +{ + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct max8998_dev *max8998 = i2c_get_clientdata(i2c); + + if (max8998->wakeup) + set_irq_wake(max8998->irq, 1); + return 0; +} + +static int max8998_resume(struct device *dev) +{ + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct max8998_dev *max8998 = i2c_get_clientdata(i2c); + + if (max8998->wakeup) + set_irq_wake(max8998->irq, 0); + /* + * In LP3974, if IRQ registers are not "read & clear" + * when it's set during sleep, the interrupt becomes + * disabled. + */ + return max8998_irq_resume(i2c_get_clientdata(i2c)); +} + +struct max8998_reg_dump { + u8 addr; + u8 val; +}; +#define SAVE_ITEM(x) { .addr = (x), .val = 0x0, } +struct max8998_reg_dump max8998_dump[] = { + SAVE_ITEM(MAX8998_REG_IRQM1), + SAVE_ITEM(MAX8998_REG_IRQM2), + SAVE_ITEM(MAX8998_REG_IRQM3), + SAVE_ITEM(MAX8998_REG_IRQM4), + SAVE_ITEM(MAX8998_REG_STATUSM1), + SAVE_ITEM(MAX8998_REG_STATUSM2), + SAVE_ITEM(MAX8998_REG_CHGR1), + SAVE_ITEM(MAX8998_REG_CHGR2), + SAVE_ITEM(MAX8998_REG_LDO_ACTIVE_DISCHARGE1), + SAVE_ITEM(MAX8998_REG_LDO_ACTIVE_DISCHARGE1), + SAVE_ITEM(MAX8998_REG_BUCK_ACTIVE_DISCHARGE3), + SAVE_ITEM(MAX8998_REG_ONOFF1), + SAVE_ITEM(MAX8998_REG_ONOFF2), + SAVE_ITEM(MAX8998_REG_ONOFF3), + SAVE_ITEM(MAX8998_REG_ONOFF4), + SAVE_ITEM(MAX8998_REG_BUCK1_VOLTAGE1), + SAVE_ITEM(MAX8998_REG_BUCK1_VOLTAGE2), + SAVE_ITEM(MAX8998_REG_BUCK1_VOLTAGE3), + SAVE_ITEM(MAX8998_REG_BUCK1_VOLTAGE4), + SAVE_ITEM(MAX8998_REG_BUCK2_VOLTAGE1), + SAVE_ITEM(MAX8998_REG_BUCK2_VOLTAGE2), + SAVE_ITEM(MAX8998_REG_LDO2_LDO3), + SAVE_ITEM(MAX8998_REG_LDO4), + SAVE_ITEM(MAX8998_REG_LDO5), + SAVE_ITEM(MAX8998_REG_LDO6), + SAVE_ITEM(MAX8998_REG_LDO7), + SAVE_ITEM(MAX8998_REG_LDO8_LDO9), + SAVE_ITEM(MAX8998_REG_LDO10_LDO11), + SAVE_ITEM(MAX8998_REG_LDO12), + SAVE_ITEM(MAX8998_REG_LDO13), + SAVE_ITEM(MAX8998_REG_LDO14), + SAVE_ITEM(MAX8998_REG_LDO15), + SAVE_ITEM(MAX8998_REG_LDO16), + SAVE_ITEM(MAX8998_REG_LDO17), + SAVE_ITEM(MAX8998_REG_BKCHR), + SAVE_ITEM(MAX8998_REG_LBCNFG1), + SAVE_ITEM(MAX8998_REG_LBCNFG2), +}; +/* Save registers before hibernation */ +static int max8998_freeze(struct device *dev) +{ + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + int i; + + for (i = 0; i < ARRAY_SIZE(max8998_dump); i++) + max8998_read_reg(i2c, max8998_dump[i].addr, + &max8998_dump[i].val); + + return 0; +} + +/* Restore registers after hibernation */ +static int max8998_restore(struct device *dev) +{ + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + int i; + + for (i = 0; i < ARRAY_SIZE(max8998_dump); i++) + max8998_write_reg(i2c, max8998_dump[i].addr, + max8998_dump[i].val); + + return 0; +} + +const struct dev_pm_ops max8998_pm = { + .suspend = max8998_suspend, + .resume = max8998_resume, + .freeze = max8998_freeze, + .restore = max8998_restore, +}; + static struct i2c_driver max8998_i2c_driver = { .driver = { .name = "max8998", .owner = THIS_MODULE, + .pm = &max8998_pm, }, .probe = max8998_i2c_probe, .remove = max8998_i2c_remove, -- cgit v1.2.1 From de8255ccd219267cfd34139022b197c1ef8f032f Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 30 Dec 2010 20:27:33 -0800 Subject: i2c: Convert SCx200 driver from using raw PCI to platform device The SCx200 ACB driver supports ISA hardware as well as PCI. The PCI hardware is CS5535/CS5536 based, and the device that it grabs is handled by the cs5535-mfd driver. This converts the SCx200 driver to use a platform_driver rather than the previous PCI hackery. The driver used to manually track the iface list (via linked list); now it only does this for ISA devices. PCI ifaces are handled through standard driver model lists. It's unclear what happens in case of errors in the old ISA code; rather than pretending the code actually cares, I've dropped the (implicit) ignorance of return values and marked it with a comment. Signed-off-by: Andres Salomon Signed-off-by: Samuel Ortiz --- drivers/i2c/busses/scx200_acb.c | 200 ++++++++++++++++------------------------ 1 file changed, 80 insertions(+), 120 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index 53fab518b3da..986e5f62debe 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -40,6 +41,7 @@ MODULE_AUTHOR("Christer Weinigel "); MODULE_DESCRIPTION("NatSemi SCx200 ACCESS.bus Driver"); +MODULE_ALIAS("platform:cs5535-smb"); MODULE_LICENSE("GPL"); #define MAX_DEVICES 4 @@ -84,10 +86,6 @@ struct scx200_acb_iface { u8 *ptr; char needs_reset; unsigned len; - - /* PCI device info */ - struct pci_dev *pdev; - int bar; }; /* Register Definitions */ @@ -391,7 +389,7 @@ static const struct i2c_algorithm scx200_acb_algorithm = { static struct scx200_acb_iface *scx200_acb_list; static DEFINE_MUTEX(scx200_acb_list_mutex); -static __init int scx200_acb_probe(struct scx200_acb_iface *iface) +static __devinit int scx200_acb_probe(struct scx200_acb_iface *iface) { u8 val; @@ -427,7 +425,7 @@ static __init int scx200_acb_probe(struct scx200_acb_iface *iface) return 0; } -static __init struct scx200_acb_iface *scx200_create_iface(const char *text, +static __devinit struct scx200_acb_iface *scx200_create_iface(const char *text, struct device *dev, int index) { struct scx200_acb_iface *iface; @@ -452,7 +450,7 @@ static __init struct scx200_acb_iface *scx200_create_iface(const char *text, return iface; } -static int __init scx200_acb_create(struct scx200_acb_iface *iface) +static int __devinit scx200_acb_create(struct scx200_acb_iface *iface) { struct i2c_adapter *adapter; int rc; @@ -472,183 +470,145 @@ static int __init scx200_acb_create(struct scx200_acb_iface *iface) return -ENODEV; } - mutex_lock(&scx200_acb_list_mutex); - iface->next = scx200_acb_list; - scx200_acb_list = iface; - mutex_unlock(&scx200_acb_list_mutex); + if (!adapter->dev.parent) { + /* If there's no dev, we're tracking (ISA) ifaces manually */ + mutex_lock(&scx200_acb_list_mutex); + iface->next = scx200_acb_list; + scx200_acb_list = iface; + mutex_unlock(&scx200_acb_list_mutex); + } return 0; } -static __init int scx200_create_pci(const char *text, struct pci_dev *pdev, - int bar) +static struct scx200_acb_iface * __devinit scx200_create_dev(const char *text, + unsigned long base, int index, struct device *dev) { struct scx200_acb_iface *iface; int rc; - iface = scx200_create_iface(text, &pdev->dev, 0); + iface = scx200_create_iface(text, dev, index); if (iface == NULL) - return -ENOMEM; - - iface->pdev = pdev; - iface->bar = bar; - - rc = pci_enable_device_io(iface->pdev); - if (rc) - goto errout_free; + return NULL; - rc = pci_request_region(iface->pdev, iface->bar, iface->adapter.name); - if (rc) { - printk(KERN_ERR NAME ": can't allocate PCI BAR %d\n", - iface->bar); + if (!request_region(base, 8, iface->adapter.name)) { + printk(KERN_ERR NAME ": can't allocate io 0x%lx-0x%lx\n", + base, base + 8 - 1); goto errout_free; } - iface->base = pci_resource_start(iface->pdev, iface->bar); + iface->base = base; rc = scx200_acb_create(iface); if (rc == 0) - return 0; + return iface; - pci_release_region(iface->pdev, iface->bar); - pci_dev_put(iface->pdev); + release_region(base, 8); errout_free: kfree(iface); - return rc; + return NULL; } -static int __init scx200_create_isa(const char *text, unsigned long base, - int index) +static int __devinit scx200_probe(struct platform_device *pdev) { struct scx200_acb_iface *iface; - int rc; - - iface = scx200_create_iface(text, NULL, index); - - if (iface == NULL) - return -ENOMEM; + struct resource *res; - if (!request_region(base, 8, iface->adapter.name)) { - printk(KERN_ERR NAME ": can't allocate io 0x%lx-0x%lx\n", - base, base + 8 - 1); - rc = -EBUSY; - goto errout_free; + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!res) { + dev_err(&pdev->dev, "can't fetch device resource info\n"); + return -ENODEV; } - iface->base = base; - rc = scx200_acb_create(iface); + iface = scx200_create_dev("CS5535", res->start, 0, &pdev->dev); + if (!iface) + return -EIO; - if (rc == 0) - return 0; + dev_info(&pdev->dev, "SCx200 device '%s' registered\n", + iface->adapter.name); + platform_set_drvdata(pdev, iface); - release_region(base, 8); - errout_free: - kfree(iface); - return rc; + return 0; } -/* Driver data is an index into the scx200_data array that indicates - * the name and the BAR where the I/O address resource is located. ISA - * devices are flagged with a bar value of -1 */ - -static const struct pci_device_id scx200_pci[] __initconst = { - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE), - .driver_data = 0 }, - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE), - .driver_data = 0 }, - { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA), - .driver_data = 1 }, - { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA), - .driver_data = 2 }, - { 0, } -}; - -static struct { - const char *name; - int bar; -} scx200_data[] = { - { "SCx200", -1 }, - { "CS5535", 0 }, - { "CS5536", 0 } -}; +static void __devexit scx200_cleanup_iface(struct scx200_acb_iface *iface) +{ + i2c_del_adapter(&iface->adapter); + release_region(iface->base, 8); + kfree(iface); +} -static __init int scx200_scan_pci(void) +static int __devexit scx200_remove(struct platform_device *pdev) { - int data, dev; - int rc = -ENODEV; - struct pci_dev *pdev; + struct scx200_acb_iface *iface; - for(dev = 0; dev < ARRAY_SIZE(scx200_pci); dev++) { - pdev = pci_get_device(scx200_pci[dev].vendor, - scx200_pci[dev].device, NULL); + iface = platform_get_drvdata(pdev); + platform_set_drvdata(pdev, NULL); + scx200_cleanup_iface(iface); - if (pdev == NULL) - continue; + return 0; +} - data = scx200_pci[dev].driver_data; +static struct platform_driver scx200_pci_drv = { + .driver = { + .name = "cs5535-smb", + .owner = THIS_MODULE, + }, + .probe = scx200_probe, + .remove = __devexit_p(scx200_remove), +}; - /* if .bar is greater or equal to zero, this is a - * PCI device - otherwise, we assume - that the ports are ISA based - */ +static const struct pci_device_id scx200_isa[] __initconst = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) }, + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) }, + { 0, } +}; - if (scx200_data[data].bar >= 0) - rc = scx200_create_pci(scx200_data[data].name, pdev, - scx200_data[data].bar); - else { - int i; +static __init void scx200_scan_isa(void) +{ + int i; - pci_dev_put(pdev); - for (i = 0; i < MAX_DEVICES; ++i) { - if (base[i] == 0) - continue; + if (!pci_dev_present(scx200_isa)) + return; - rc = scx200_create_isa(scx200_data[data].name, - base[i], - i); - } - } + for (i = 0; i < MAX_DEVICES; ++i) { + if (base[i] == 0) + continue; - break; + /* XXX: should we care about failures? */ + scx200_create_dev("SCx200", base[i], i, NULL); } - - return rc; } static int __init scx200_acb_init(void) { - int rc; - pr_debug(NAME ": NatSemi SCx200 ACCESS.bus Driver\n"); - rc = scx200_scan_pci(); + /* First scan for ISA-based devices */ + scx200_scan_isa(); /* XXX: should we care about errors? */ /* If at least one bus was created, init must succeed */ if (scx200_acb_list) return 0; - return rc; + + /* No ISA devices; register the platform driver for PCI-based devices */ + return platform_driver_register(&scx200_pci_drv); } static void __exit scx200_acb_cleanup(void) { struct scx200_acb_iface *iface; + platform_driver_unregister(&scx200_pci_drv); + mutex_lock(&scx200_acb_list_mutex); while ((iface = scx200_acb_list) != NULL) { scx200_acb_list = iface->next; mutex_unlock(&scx200_acb_list_mutex); - i2c_del_adapter(&iface->adapter); - - if (iface->pdev) { - pci_release_region(iface->pdev, iface->bar); - pci_dev_put(iface->pdev); - } - else - release_region(iface->base, 8); + scx200_cleanup_iface(iface); - kfree(iface); mutex_lock(&scx200_acb_list_mutex); } mutex_unlock(&scx200_acb_list_mutex); -- cgit v1.2.1 From 337ce5d1c5759644cea6c47220ce7e84f0398362 Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Tue, 4 Jan 2011 14:17:39 +0900 Subject: mfd: Support LP3974 RTC The first releases of LP3974 have a large delay in RTC registers, which requires 2 seconds of delay after writing to a rtc register (recommended by National Semiconductor's engineers) before reading it. If "rtc_delay" field of the platform data is true, the rtc driver assumes that such delays are required. Although we have not seen LP3974s without requiring such delays, we assume that such LP3974s will be released soon (or they have done so already) and they are supported by "lp3974" without setting "rtc_delay" at the platform data. This patch adds delays with msleep when writing values to RTC registers if the platform data has rtc_delay set. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/max8998.c | 26 +++++++++++++++++++--- drivers/regulator/max8998.c | 7 ++++++ drivers/rtc/rtc-max8998.c | 54 ++++++++++++++++++++++++++++++++++++++++----- 3 files changed, 79 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c index 5ce00ad5241a..bbfe86732602 100644 --- a/drivers/mfd/max8998.c +++ b/drivers/mfd/max8998.c @@ -42,6 +42,14 @@ static struct mfd_cell max8998_devs[] = { }, }; +static struct mfd_cell lp3974_devs[] = { + { + .name = "lp3974-pmic", + }, { + .name = "lp3974-rtc", + }, +}; + int max8998_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest) { struct max8998_dev *max8998 = i2c_get_clientdata(i2c); @@ -146,11 +154,23 @@ static int max8998_i2c_probe(struct i2c_client *i2c, max8998_irq_init(max8998); - ret = mfd_add_devices(max8998->dev, -1, - max8998_devs, ARRAY_SIZE(max8998_devs), - NULL, 0); pm_runtime_set_active(max8998->dev); + switch (id->driver_data) { + case TYPE_LP3974: + ret = mfd_add_devices(max8998->dev, -1, + lp3974_devs, ARRAY_SIZE(lp3974_devs), + NULL, 0); + break; + case TYPE_MAX8998: + ret = mfd_add_devices(max8998->dev, -1, + max8998_devs, ARRAY_SIZE(max8998_devs), + NULL, 0); + break; + default: + ret = -EINVAL; + } + if (ret < 0) goto err; diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index 7568df6122ab..af52ebfc4927 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -835,6 +835,12 @@ static int __devexit max8998_pmic_remove(struct platform_device *pdev) return 0; } +static const struct platform_device_id max8998_pmic_id[] = { + { "max8998-pmic", TYPE_MAX8998 }, + { "lp3974-pmic", TYPE_LP3974 }, + { } +}; + static struct platform_driver max8998_pmic_driver = { .driver = { .name = "max8998-pmic", @@ -842,6 +848,7 @@ static struct platform_driver max8998_pmic_driver = { }, .probe = max8998_pmic_probe, .remove = __devexit_p(max8998_pmic_remove), + .id_table = max8998_pmic_id, }; static int __init max8998_pmic_init(void) diff --git a/drivers/rtc/rtc-max8998.c b/drivers/rtc/rtc-max8998.c index f22dee35f330..3f7bc6b9fefa 100644 --- a/drivers/rtc/rtc-max8998.c +++ b/drivers/rtc/rtc-max8998.c @@ -20,6 +20,7 @@ #include #include #include +#include #define MAX8998_RTC_SEC 0x00 #define MAX8998_RTC_MIN 0x01 @@ -73,6 +74,7 @@ struct max8998_rtc_info { struct i2c_client *rtc; struct rtc_device *rtc_dev; int irq; + bool lp3974_bug_workaround; }; static void max8998_data_to_tm(u8 *data, struct rtc_time *tm) @@ -124,10 +126,16 @@ static int max8998_rtc_set_time(struct device *dev, struct rtc_time *tm) { struct max8998_rtc_info *info = dev_get_drvdata(dev); u8 data[8]; + int ret; max8998_tm_to_data(tm, data); - return max8998_bulk_write(info->rtc, MAX8998_RTC_SEC, 8, data); + ret = max8998_bulk_write(info->rtc, MAX8998_RTC_SEC, 8, data); + + if (info->lp3974_bug_workaround) + msleep(2000); + + return ret; } static int max8998_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) @@ -163,12 +171,29 @@ static int max8998_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) static int max8998_rtc_stop_alarm(struct max8998_rtc_info *info) { - return max8998_write_reg(info->rtc, MAX8998_ALARM0_CONF, 0); + int ret = max8998_write_reg(info->rtc, MAX8998_ALARM0_CONF, 0); + + if (info->lp3974_bug_workaround) + msleep(2000); + + return ret; } static int max8998_rtc_start_alarm(struct max8998_rtc_info *info) { - return max8998_write_reg(info->rtc, MAX8998_ALARM0_CONF, 0x77); + int ret; + u8 alarm0_conf = 0x77; + + /* LP3974 with delay bug chips has rtc alarm bugs with "MONTH" field */ + if (info->lp3974_bug_workaround) + alarm0_conf = 0x57; + + ret = max8998_write_reg(info->rtc, MAX8998_ALARM0_CONF, alarm0_conf); + + if (info->lp3974_bug_workaround) + msleep(2000); + + return ret; } static int max8998_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) @@ -187,10 +212,13 @@ static int max8998_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) if (ret < 0) return ret; + if (info->lp3974_bug_workaround) + msleep(2000); + if (alrm->enabled) - return max8998_rtc_start_alarm(info); + ret = max8998_rtc_start_alarm(info); - return 0; + return ret; } static int max8998_rtc_alarm_irq_enable(struct device *dev, @@ -224,6 +252,7 @@ static const struct rtc_class_ops max8998_rtc_ops = { static int __devinit max8998_rtc_probe(struct platform_device *pdev) { struct max8998_dev *max8998 = dev_get_drvdata(pdev->dev.parent); + struct max8998_platform_data *pdata = dev_get_platdata(max8998->dev); struct max8998_rtc_info *info; int ret; @@ -249,10 +278,18 @@ static int __devinit max8998_rtc_probe(struct platform_device *pdev) ret = request_threaded_irq(info->irq, NULL, max8998_rtc_alarm_irq, 0, "rtc-alarm0", info); + if (ret < 0) dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n", info->irq, ret); + dev_info(&pdev->dev, "RTC CHIP NAME: %s\n", pdev->id_entry->name); + if (pdata->rtc_delay) { + info->lp3974_bug_workaround = true; + dev_warn(&pdev->dev, "LP3974 with RTC REGERR option." + " RTC updates will be extremely slow.\n"); + } + return 0; out_rtc: @@ -273,6 +310,12 @@ static int __devexit max8998_rtc_remove(struct platform_device *pdev) return 0; } +static const struct platform_device_id max8998_rtc_id[] = { + { "max8998-rtc", TYPE_MAX8998 }, + { "lp3974-rtc", TYPE_LP3974 }, + { } +}; + static struct platform_driver max8998_rtc_driver = { .driver = { .name = "max8998-rtc", @@ -280,6 +323,7 @@ static struct platform_driver max8998_rtc_driver = { }, .probe = max8998_rtc_probe, .remove = __devexit_p(max8998_rtc_remove), + .id_table = max8998_rtc_id, }; static int __init max8998_rtc_init(void) -- cgit v1.2.1 From 735a3d9efdc5aeebe201008e6655b235c7f02aeb Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Tue, 11 Jan 2011 12:20:05 +0100 Subject: regulator: Support MAX8998/LP3974 DVS-GPIO The previous driver did not support BUCK1-DVS3, BUCK1-DVS4, and BUCK2-DVS2 modes. This patch adds such modes and an option to block setting buck1/2 voltages out of the preset values. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Acked-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/regulator/max8998.c | 87 ++++++++++++++++++++++++++++++++++----------- 1 file changed, 67 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index af52ebfc4927..0ec49ca527a8 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -424,6 +424,9 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev, } } + if (pdata->buck_voltage_lock) + return -EINVAL; + /* no predefine regulator found */ max8998->buck1_idx = (buck1_last_val % 2) + 2; dev_dbg(max8998->dev, "max8998->buck1_idx:%d\n", @@ -451,18 +454,26 @@ buck1_exit: "BUCK2, i:%d buck2_vol1:%d, buck2_vol2:%d\n" , i, max8998->buck2_vol[0], max8998->buck2_vol[1]); if (gpio_is_valid(pdata->buck2_set3)) { - if (max8998->buck2_vol[0] == i) { - max8998->buck1_idx = 0; - buck2_gpio_set(pdata->buck2_set3, 0); - } else { - max8998->buck1_idx = 1; - ret = max8998_get_voltage_register(rdev, ®, - &shift, - &mask); - ret = max8998_write_reg(i2c, reg, i); - max8998->buck2_vol[1] = i; - buck2_gpio_set(pdata->buck2_set3, 1); + + /* check if requested voltage */ + /* value is already defined */ + for (j = 0; j < ARRAY_SIZE(max8998->buck2_vol); j++) { + if (max8998->buck2_vol[j] == i) { + max8998->buck2_idx = j; + buck2_gpio_set(pdata->buck2_set3, j); + goto buck2_exit; + } } + + if (pdata->buck_voltage_lock) + return -EINVAL; + + max8998_get_voltage_register(rdev, + ®, &shift, &mask); + ret = max8998_write_reg(i2c, reg, i); + max8998->buck2_vol[max8998->buck2_idx] = i; + buck2_gpio_set(pdata->buck2_set3, max8998->buck2_idx); +buck2_exit: dev_dbg(max8998->dev, "%s: SET3:%d\n", i2c->name, gpio_get_value(pdata->buck2_set3)); } else { @@ -707,6 +718,9 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) platform_set_drvdata(pdev, max8998); i2c = max8998->iodev->i2c; + max8998->buck1_idx = pdata->buck1_default_idx; + max8998->buck2_idx = pdata->buck2_default_idx; + /* NOTE: */ /* For unused GPIO NOT marked as -1 (thereof equal to 0) WARN_ON */ /* will be displayed */ @@ -739,23 +753,46 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) i = 0; while (buck12_voltage_map_desc.min + buck12_voltage_map_desc.step*i - != (pdata->buck1_max_voltage1 / 1000)) + < (pdata->buck1_voltage1 / 1000)) i++; - printk(KERN_ERR "i:%d, buck1_idx:%d\n", i, max8998->buck1_idx); max8998->buck1_vol[0] = i; ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i); + if (ret) + return ret; /* Set predefined value for BUCK1 register 2 */ i = 0; while (buck12_voltage_map_desc.min + buck12_voltage_map_desc.step*i - != (pdata->buck1_max_voltage2 / 1000)) + < (pdata->buck1_voltage2 / 1000)) i++; max8998->buck1_vol[1] = i; - printk(KERN_ERR "i:%d, buck1_idx:%d\n", i, max8998->buck1_idx); - ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i) - + ret; + ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i); + if (ret) + return ret; + + /* Set predefined value for BUCK1 register 3 */ + i = 0; + while (buck12_voltage_map_desc.min + + buck12_voltage_map_desc.step*i + < (pdata->buck1_voltage3 / 1000)) + i++; + + max8998->buck1_vol[2] = i; + ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE3, i); + if (ret) + return ret; + + /* Set predefined value for BUCK1 register 4 */ + i = 0; + while (buck12_voltage_map_desc.min + + buck12_voltage_map_desc.step*i + < (pdata->buck1_voltage4 / 1000)) + i++; + + max8998->buck1_vol[3] = i; + ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE4, i); if (ret) return ret; @@ -772,18 +809,28 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) gpio_direction_output(pdata->buck2_set3, max8998->buck2_idx & 0x1); - /* BUCK2 - set preset default voltage value to buck2_vol[0] */ + /* BUCK2 register 1 */ i = 0; while (buck12_voltage_map_desc.min + buck12_voltage_map_desc.step*i - != (pdata->buck2_max_voltage / 1000)) + < (pdata->buck2_voltage1 / 1000)) i++; - printk(KERN_ERR "i:%d, buck2_idx:%d\n", i, max8998->buck2_idx); max8998->buck2_vol[0] = i; ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i); if (ret) return ret; + /* BUCK2 register 2 */ + i = 0; + while (buck12_voltage_map_desc.min + + buck12_voltage_map_desc.step*i + < (pdata->buck2_voltage2 / 1000)) + i++; + printk(KERN_ERR "i2:%d, buck2_idx:%d\n", i, max8998->buck2_idx); + max8998->buck2_vol[1] = i; + ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i); + if (ret) + return ret; } for (i = 0; i < pdata->num_regulators; i++) { -- cgit v1.2.1 From c538ddbe4fc70ef97af02d57abad34b246b19082 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 5 Jan 2011 15:12:39 +0000 Subject: mfd: Convert WM831x away from legacy I2C PM operations Since the legacy bus PM operations are deprecated move the suspend method over to dev_pm_ops. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-i2c.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/wm831x-i2c.c b/drivers/mfd/wm831x-i2c.c index 38be5201c783..3853fa8e7cc2 100644 --- a/drivers/mfd/wm831x-i2c.c +++ b/drivers/mfd/wm831x-i2c.c @@ -94,9 +94,9 @@ static int wm831x_i2c_remove(struct i2c_client *i2c) return 0; } -static int wm831x_i2c_suspend(struct i2c_client *i2c, pm_message_t mesg) +static int wm831x_i2c_suspend(struct device *dev) { - struct wm831x *wm831x = i2c_get_clientdata(i2c); + struct wm831x *wm831x = dev_get_drvdata(dev); return wm831x_device_suspend(wm831x); } @@ -113,15 +113,18 @@ static const struct i2c_device_id wm831x_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id); +static const struct dev_pm_ops wm831x_pm_ops = { + .suspend = wm831x_i2c_suspend, +}; static struct i2c_driver wm831x_i2c_driver = { .driver = { - .name = "wm831x", - .owner = THIS_MODULE, + .name = "wm831x", + .owner = THIS_MODULE, + .pm = &wm831x_pm_ops, }, .probe = wm831x_i2c_probe, .remove = wm831x_i2c_remove, - .suspend = wm831x_i2c_suspend, .id_table = wm831x_i2c_id, }; -- cgit v1.2.1 From 180e4f5f20ef2b03ce2b38634274dde5ccbd8951 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 5 Jan 2011 17:56:01 +0000 Subject: mfd: Flag WM831x /IRQ as a wake source The WM831x can generate wake events, some unconditionally, so flag the primary IRQ as a wake source in order to help the CPU treat the /IRQ signal appropriately. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-irq.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c index ee88f6a05cec..f7192d438aab 100644 --- a/drivers/mfd/wm831x-irq.c +++ b/drivers/mfd/wm831x-irq.c @@ -517,6 +517,17 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq) return 0; } + /* Try to flag /IRQ as a wake source; there are a number of + * unconditional wake sources in the PMIC so this isn't + * conditional but we don't actually care *too* much if it + * fails. + */ + ret = enable_irq_wake(irq); + if (ret != 0) { + dev_warn(wm831x->dev, "Can't enable IRQ as wake source: %d\n", + ret); + } + wm831x->irq = irq; wm831x->irq_base = pdata->irq_base; -- cgit v1.2.1 From 92d50a4132977b932ed830fa58c05deeb5c524f0 Mon Sep 17 00:00:00 2001 From: Mattias Wallin Date: Tue, 7 Dec 2010 11:20:47 +0100 Subject: mfd: ab8500-core chip version cut 2.0 support This patch adds support for chip version 2.0 or cut 2.0. One new interrupt latch register - latch 12 - is introduced. Signed-off-by: Mattias Wallin Acked-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 36 +++++++++++++++++++++++++----------- 1 file changed, 25 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 86cc8874e6de..b6887014d687 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -52,6 +52,7 @@ #define AB8500_IT_LATCH8_REG 0x27 #define AB8500_IT_LATCH9_REG 0x28 #define AB8500_IT_LATCH10_REG 0x29 +#define AB8500_IT_LATCH12_REG 0x2B #define AB8500_IT_LATCH19_REG 0x32 #define AB8500_IT_LATCH20_REG 0x33 #define AB8500_IT_LATCH21_REG 0x34 @@ -98,7 +99,7 @@ * offset 0. */ static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = { - 0, 1, 2, 3, 4, 6, 7, 8, 9, 18, 19, 20, 21, + 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, }; static int ab8500_get_chip_id(struct device *dev) @@ -252,6 +253,10 @@ static void ab8500_irq_sync_unlock(struct irq_data *data) if (new == old) continue; + /* Interrupt register 12 does'nt exist prior to version 0x20 */ + if (ab8500_irq_regoffset[i] == 11 && ab8500->chip_id < 0x20) + continue; + ab8500->oldmask[i] = new; reg = AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i]; @@ -301,6 +306,10 @@ static irqreturn_t ab8500_irq(int irq, void *dev) int status; u8 value; + /* Interrupt register 12 does'nt exist prior to version 0x20 */ + if (regoffset == 11 && ab8500->chip_id < 0x20) + continue; + status = get_register_interruptible(ab8500, AB8500_INTERRUPT, AB8500_IT_LATCH1_REG + regoffset, &value); if (status < 0 || value == 0) @@ -554,6 +563,12 @@ static struct resource ab8500_usb_resources[] = { .end = AB8500_INT_VBUS_DET_R, .flags = IORESOURCE_IRQ, }, + { + .name = "USB_LINK_STATUS", + .start = AB8500_INT_USB_LINK_STATUS, + .end = AB8500_INT_USB_LINK_STATUS, + .flags = IORESOURCE_IRQ, + }, }; static struct resource ab8500_temp_resources[] = { @@ -670,8 +685,9 @@ int __devinit ab8500_init(struct ab8500 *ab8500) * 0x0 - Early Drop * 0x10 - Cut 1.0 * 0x11 - Cut 1.1 + * 0x20 - Cut 2.0 */ - if (value == 0x0 || value == 0x10 || value == 0x11) { + if (value == 0x0 || value == 0x10 || value == 0x11 || value == 0x20) { ab8500->revision = value; dev_info(ab8500->dev, "detected chip, revision: %#x\n", value); } else { @@ -684,18 +700,16 @@ int __devinit ab8500_init(struct ab8500 *ab8500) plat->init(ab8500); /* Clear and mask all interrupts */ - for (i = 0; i < 10; i++) { - get_register_interruptible(ab8500, AB8500_INTERRUPT, - AB8500_IT_LATCH1_REG + i, &value); - set_register_interruptible(ab8500, AB8500_INTERRUPT, - AB8500_IT_MASK1_REG + i, 0xff); - } + for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) { + /* Interrupt register 12 does'nt exist prior to version 0x20 */ + if (ab8500_irq_regoffset[i] == 11 && ab8500->chip_id < 0x20) + continue; - for (i = 18; i < 24; i++) { get_register_interruptible(ab8500, AB8500_INTERRUPT, - AB8500_IT_LATCH1_REG + i, &value); + AB8500_IT_LATCH1_REG + ab8500_irq_regoffset[i], + &value); set_register_interruptible(ab8500, AB8500_INTERRUPT, - AB8500_IT_MASK1_REG + i, 0xff); + AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i], 0xff); } ret = abx500_register_ops(ab8500->dev, &ab8500_ops); -- cgit v1.2.1 From 359ab9f5b154cbd807a11e22792235f0f36b0cd5 Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Fri, 14 Jan 2011 14:46:11 +0900 Subject: power_supply: Add MAX17042 Fuel Gauge Driver The MAX17042 is a fuel gauge with an I2C interface for lithium-ion betteries. Unlike its predecessor MAX17040, MAX17042 uses 16bit registers. Besides, MAX17042 has much more features than MAX17040; e.g., a thermistor, current and current accumulation measurement, battery internal resistance estimate, average values of measurement, and others. This patch implements a driver for MAX17042. In this initial release, we have implemented the most basic features of a fuel gauge: measure the battery capacity and voltage. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 10 ++ drivers/power/Makefile | 1 + drivers/power/max17042_battery.c | 239 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 250 insertions(+) create mode 100644 drivers/power/max17042_battery.c (limited to 'drivers') diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 32165295cb1b..61bf5d724139 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -136,6 +136,16 @@ config BATTERY_MAX17040 in handheld and portable equipment. The MAX17040 is configured to operate with a single lithium cell +config BATTERY_MAX17042 + tristate "Maxim MAX17042/8997/8966 Fuel Gauge" + depends on I2C + help + MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries + in handheld and portable equipment. The MAX17042 is configured + to operate with a single lithium cell. MAX8997 and MAX8966 are + multi-function devices that include fuel gauages that are compatible + with MAX17042. + config BATTERY_Z2 tristate "Z2 battery driver" depends on I2C && MACH_ZIPIT2 diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 545459f9f356..8385bfae8728 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_BATTERY_BQ20Z75) += bq20z75.o obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o +obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o obj-$(CONFIG_BATTERY_Z2) += z2_battery.o obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o diff --git a/drivers/power/max17042_battery.c b/drivers/power/max17042_battery.c new file mode 100644 index 000000000000..c5c8805156cb --- /dev/null +++ b/drivers/power/max17042_battery.c @@ -0,0 +1,239 @@ +/* + * Fuel gauge driver for Maxim 17042 / 8966 / 8997 + * Note that Maxim 8966 and 8997 are mfd and this is its subdevice. + * + * Copyright (C) 2011 Samsung Electronics + * MyungJoo Ham + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This driver is based on max17040_battery.c + */ + +#include +#include +#include +#include +#include +#include + +enum max17042_register { + MAX17042_STATUS = 0x00, + MAX17042_VALRT_Th = 0x01, + MAX17042_TALRT_Th = 0x02, + MAX17042_SALRT_Th = 0x03, + MAX17042_AtRate = 0x04, + MAX17042_RepCap = 0x05, + MAX17042_RepSOC = 0x06, + MAX17042_Age = 0x07, + MAX17042_TEMP = 0x08, + MAX17042_VCELL = 0x09, + MAX17042_Current = 0x0A, + MAX17042_AvgCurrent = 0x0B, + MAX17042_Qresidual = 0x0C, + MAX17042_SOC = 0x0D, + MAX17042_AvSOC = 0x0E, + MAX17042_RemCap = 0x0F, + MAX17402_FullCAP = 0x10, + MAX17042_TTE = 0x11, + MAX17042_V_empty = 0x12, + + MAX17042_RSLOW = 0x14, + + MAX17042_AvgTA = 0x16, + MAX17042_Cycles = 0x17, + MAX17042_DesignCap = 0x18, + MAX17042_AvgVCELL = 0x19, + MAX17042_MinMaxTemp = 0x1A, + MAX17042_MinMaxVolt = 0x1B, + MAX17042_MinMaxCurr = 0x1C, + MAX17042_CONFIG = 0x1D, + MAX17042_ICHGTerm = 0x1E, + MAX17042_AvCap = 0x1F, + MAX17042_ManName = 0x20, + MAX17042_DevName = 0x21, + MAX17042_DevChem = 0x22, + + MAX17042_TempNom = 0x24, + MAX17042_TempCold = 0x25, + MAX17042_TempHot = 0x26, + MAX17042_AIN = 0x27, + MAX17042_LearnCFG = 0x28, + MAX17042_SHFTCFG = 0x29, + MAX17042_RelaxCFG = 0x2A, + MAX17042_MiscCFG = 0x2B, + MAX17042_TGAIN = 0x2C, + MAx17042_TOFF = 0x2D, + MAX17042_CGAIN = 0x2E, + MAX17042_COFF = 0x2F, + + MAX17042_Q_empty = 0x33, + MAX17042_T_empty = 0x34, + + MAX17042_RCOMP0 = 0x38, + MAX17042_TempCo = 0x39, + MAX17042_Rx = 0x3A, + MAX17042_T_empty0 = 0x3B, + MAX17042_TaskPeriod = 0x3C, + MAX17042_FSTAT = 0x3D, + + MAX17042_SHDNTIMER = 0x3F, + + MAX17042_VFRemCap = 0x4A, + + MAX17042_QH = 0x4D, + MAX17042_QL = 0x4E, +}; + +struct max17042_chip { + struct i2c_client *client; + struct power_supply battery; + struct max17042_platform_data *pdata; +}; + +static int max17042_write_reg(struct i2c_client *client, u8 reg, u16 value) +{ + int ret = i2c_smbus_write_word_data(client, reg, value); + + if (ret < 0) + dev_err(&client->dev, "%s: err %d\n", __func__, ret); + + return ret; +} + +static int max17042_read_reg(struct i2c_client *client, u8 reg) +{ + int ret = i2c_smbus_read_word_data(client, reg); + + if (ret < 0) + dev_err(&client->dev, "%s: err %d\n", __func__, ret); + + return ret; +} + +static enum power_supply_property max17042_battery_props[] = { + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_CAPACITY, +}; + +static int max17042_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct max17042_chip *chip = container_of(psy, + struct max17042_chip, battery); + + switch (psp) { + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = max17042_read_reg(chip->client, + MAX17042_VCELL) * 83; /* 1000 / 12 = 83 */ + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + val->intval = max17042_read_reg(chip->client, + MAX17042_AvgVCELL) * 83; + break; + case POWER_SUPPLY_PROP_CAPACITY: + val->intval = max17042_read_reg(chip->client, + MAX17042_SOC) / 256; + break; + default: + return -EINVAL; + } + return 0; +} + +static int __devinit max17042_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct max17042_chip *chip; + int ret; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -EIO; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->client = client; + chip->pdata = client->dev.platform_data; + + i2c_set_clientdata(client, chip); + + chip->battery.name = "max17042_battery"; + chip->battery.type = POWER_SUPPLY_TYPE_BATTERY; + chip->battery.get_property = max17042_get_property; + chip->battery.properties = max17042_battery_props; + chip->battery.num_properties = ARRAY_SIZE(max17042_battery_props); + + ret = power_supply_register(&client->dev, &chip->battery); + if (ret) { + dev_err(&client->dev, "failed: power supply register\n"); + i2c_set_clientdata(client, NULL); + kfree(chip); + return ret; + } + + if (!chip->pdata->enable_current_sense) { + max17042_write_reg(client, MAX17042_CGAIN, 0x0000); + max17042_write_reg(client, MAX17042_MiscCFG, 0x0003); + max17042_write_reg(client, MAX17042_LearnCFG, 0x0007); + } + + return 0; +} + +static int __devexit max17042_remove(struct i2c_client *client) +{ + struct max17042_chip *chip = i2c_get_clientdata(client); + + power_supply_unregister(&chip->battery); + i2c_set_clientdata(client, NULL); + kfree(chip); + return 0; +} + +static const struct i2c_device_id max17042_id[] = { + { "max17042", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max17042_id); + +static struct i2c_driver max17042_i2c_driver = { + .driver = { + .name = "max17042", + }, + .probe = max17042_probe, + .remove = __devexit_p(max17042_remove), + .id_table = max17042_id, +}; + +static int __init max17042_init(void) +{ + return i2c_add_driver(&max17042_i2c_driver); +} +module_init(max17042_init); + +static void __exit max17042_exit(void) +{ + i2c_del_driver(&max17042_i2c_driver); +} +module_exit(max17042_exit); + +MODULE_AUTHOR("MyungJoo Ham "); +MODULE_DESCRIPTION("MAX17042 Fuel Gauge"); +MODULE_LICENSE("GPL"); -- cgit v1.2.1 From 2bae0093cab4ee0a7a8728fdfc35b74569350863 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 18 Dec 2010 18:42:23 +0100 Subject: [SCSI] sd: implement sd_check_events() Replace sd_media_change() with sd_check_events(). * Move media removed logic into set_media_not_present() and media_not_present() and set sdev->changed iff an existing media is removed or the device indicates UNIT_ATTENTION. * Make sd_check_events() sets sdev->changed if previously missing media becomes present. * Event is reported only if sdev->changed is set. This makes media presence event reported if scsi_disk->media_present actually changed or the device indicated UNIT_ATTENTION. For backward compatibility, SDEV_EVT_MEDIA_CHANGE is generated each time sd_check_events() detects media change event. [jejb: fix boot failure] Signed-off-by: Tejun Heo Acked-by: Jens Axboe Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 104 ++++++++++++++++++++++++++++-------------------------- drivers/scsi/sd.h | 1 - 2 files changed, 53 insertions(+), 52 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index b65e65aa07eb..7d257465bd98 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -990,30 +990,51 @@ out: static void set_media_not_present(struct scsi_disk *sdkp) { - sdkp->media_present = 0; - sdkp->capacity = 0; - sdkp->device->changed = 1; + if (sdkp->media_present) + sdkp->device->changed = 1; + + if (sdkp->device->removable) { + sdkp->media_present = 0; + sdkp->capacity = 0; + } +} + +static int media_not_present(struct scsi_disk *sdkp, + struct scsi_sense_hdr *sshdr) +{ + if (!scsi_sense_valid(sshdr)) + return 0; + + /* not invoked for commands that could return deferred errors */ + switch (sshdr->sense_key) { + case UNIT_ATTENTION: + case NOT_READY: + /* medium not present */ + if (sshdr->asc == 0x3A) { + set_media_not_present(sdkp); + return 1; + } + } + return 0; } /** - * sd_media_changed - check if our medium changed - * @disk: kernel device descriptor + * sd_check_events - check media events + * @disk: kernel device descriptor + * @clearing: disk events currently being cleared * - * Returns 0 if not applicable or no change; 1 if change + * Returns mask of DISK_EVENT_*. * * Note: this function is invoked from the block subsystem. **/ -static int sd_media_changed(struct gendisk *disk) +static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing) { struct scsi_disk *sdkp = scsi_disk(disk); struct scsi_device *sdp = sdkp->device; struct scsi_sense_hdr *sshdr = NULL; int retval; - SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_media_changed\n")); - - if (!sdp->removable) - return 0; + SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n")); /* * If the device is offline, don't send any commands - just pretend as @@ -1043,40 +1064,37 @@ static int sd_media_changed(struct gendisk *disk) sshdr); } - if (retval) { + /* failed to execute TUR, assume media not present */ + if (host_byte(retval)) { set_media_not_present(sdkp); goto out; } + if (media_not_present(sdkp, sshdr)) + goto out; + /* * For removable scsi disk we have to recognise the presence - * of a disk in the drive. This is kept in the struct scsi_disk - * struct and tested at open ! Daniel Roche (dan@lectra.fr) + * of a disk in the drive. */ + if (!sdkp->media_present) + sdp->changed = 1; sdkp->media_present = 1; - out: /* - * Report a media change under the following conditions: + * sdp->changed is set under the following conditions: * - * Medium is present now and wasn't present before. - * Medium wasn't present before and is present now. - * Medium was present at all times, but it changed while - * we weren't looking (sdp->changed is set). + * Medium present state has changed in either direction. + * Device has indicated UNIT_ATTENTION. * - * If there was no medium before and there is no medium now then - * don't report a change, even if a medium was inserted and removed - * while we weren't looking. + * Report SDEV_EVT_MEDIA_CHANGE too for backward compatibility. */ - retval = (sdkp->media_present != sdkp->previous_state || - (sdkp->media_present && sdp->changed)); - if (retval) + if (sdp->changed) sdev_evt_send_simple(sdp, SDEV_EVT_MEDIA_CHANGE, GFP_KERNEL); - sdkp->previous_state = sdkp->media_present; - - /* sdp->changed indicates medium was changed or is not present */ - sdp->changed = !sdkp->media_present; kfree(sshdr); + + retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0; + sdp->changed = 0; return retval; } @@ -1169,7 +1187,7 @@ static const struct block_device_operations sd_fops = { #ifdef CONFIG_COMPAT .compat_ioctl = sd_compat_ioctl, #endif - .media_changed = sd_media_changed, + .check_events = sd_check_events, .revalidate_disk = sd_revalidate_disk, .unlock_native_capacity = sd_unlock_native_capacity, }; @@ -1312,23 +1330,6 @@ static int sd_done(struct scsi_cmnd *SCpnt) return good_bytes; } -static int media_not_present(struct scsi_disk *sdkp, - struct scsi_sense_hdr *sshdr) -{ - - if (!scsi_sense_valid(sshdr)) - return 0; - /* not invoked for commands that could return deferred errors */ - if (sshdr->sense_key != NOT_READY && - sshdr->sense_key != UNIT_ATTENTION) - return 0; - if (sshdr->asc != 0x3A) /* medium not present */ - return 0; - - set_media_not_present(sdkp); - return 1; -} - /* * spinup disk - called only in sd_revalidate_disk() */ @@ -1503,7 +1504,7 @@ static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp, */ if (sdp->removable && sense_valid && sshdr->sense_key == NOT_READY) - sdp->changed = 1; + set_media_not_present(sdkp); /* * We used to set media_present to 0 here to indicate no media @@ -2389,8 +2390,10 @@ static void sd_probe_async(void *data, async_cookie_t cookie) gd->driverfs_dev = &sdp->sdev_gendev; gd->flags = GENHD_FL_EXT_DEVT; - if (sdp->removable) + if (sdp->removable) { gd->flags |= GENHD_FL_REMOVABLE; + gd->events |= DISK_EVENT_MEDIA_CHANGE; + } add_disk(gd); sd_dif_config_host(sdkp); @@ -2472,7 +2475,6 @@ static int sd_probe(struct device *dev) sdkp->disk = gd; sdkp->index = index; atomic_set(&sdkp->openers, 0); - sdkp->previous_state = 1; if (!sdp->request_queue->rq_timeout) { if (sdp->type != TYPE_MOD) diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 55488faf0815..c9d8f6ca49e2 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -55,7 +55,6 @@ struct scsi_disk { u8 media_present; u8 write_prot; u8 protection_type;/* Data Integrity Field */ - unsigned previous_state : 1; unsigned ATO : 1; /* state of disk ATO bit */ unsigned WCE : 1; /* state of disk WCE bit */ unsigned RCD : 1; /* state of disk RCD bit, unused */ -- cgit v1.2.1 From f4013c3879d1bbd9f3ab8351185decd049502368 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 28 Dec 2010 16:20:47 +0100 Subject: [SCSI] sd,sr: kill compat SDEV_MEDIA_CHANGE event SDEV_MEDIA_CHANGE event was first added by commit a341cd0f (SCSI: add asynchronous event notification API) for SATA AN support and then extended to cover generic media change events by commit 285e9670 ([SCSI] sr,sd: send media state change modification events). This event was mapped to block device in userland with all properties stripped to simulate CHANGE event on the block device, which, in turn, was used to trigger further userspace action on media change. The recent addition of disk event framework kept this event for backward compatibility but it turns out to be unnecessary and causes erratic and inefficient behavior. The new disk event generates proper events on the block devices and the compat events are mapped to block device with all properties stripped, so the block device ends up generating multiple duplicate events for single actual event. This patch removes the compat event generation from both sr and sd as suggested by Kay Sievers. Both existing and newer versions of udev and the associated tools will behave better with the removal of these events as they from the beginning were expecting events on the block devices. Signed-off-by: Tejun Heo Acked-by: Kay Sievers Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 5 ----- drivers/scsi/sr.c | 4 ---- 2 files changed, 9 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 7d257465bd98..e56730214c05 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1086,13 +1086,8 @@ out: * * Medium present state has changed in either direction. * Device has indicated UNIT_ATTENTION. - * - * Report SDEV_EVT_MEDIA_CHANGE too for backward compatibility. */ - if (sdp->changed) - sdev_evt_send_simple(sdp, SDEV_EVT_MEDIA_CHANGE, GFP_KERNEL); kfree(sshdr); - retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0; sdp->changed = 0; return retval; diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index be6baf8ad704..aefadc6a1607 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -249,10 +249,6 @@ skip_tur: cd->device->changed = 0; } - /* for backward compatibility */ - if (events & DISK_EVENT_MEDIA_CHANGE) - sdev_evt_send_simple(cd->device, SDEV_EVT_MEDIA_CHANGE, - GFP_KERNEL); return events; } -- cgit v1.2.1 From c66ac9db8d4ad9994a02b3e933ea2ccc643e1fe5 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 17 Dec 2010 11:11:26 -0800 Subject: [SCSI] target: Add LIO target core v4.0.0-rc6 LIO target is a full featured in-kernel target framework with the following feature set: High-performance, non-blocking, multithreaded architecture with SIMD support. Advanced SCSI feature set: * Persistent Reservations (PRs) * Asymmetric Logical Unit Assignment (ALUA) * Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S) * Full Error Recovery (ERL=0,1,2) * Active/active task migration and session continuation (ERL=2) * Thin LUN provisioning (UNMAP and WRITE_SAMExx) Multiprotocol target plugins Storage media independence: * Virtualization of all storage media; transparent mapping of IO to LUNs * No hard limits on number of LUNs per Target; maximum LUN size ~750 TB * Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc. Standards compliance: * Full compliance with IETF (RFC 3720) * Full implementation of SPC-4 PRs and ALUA Significant code cleanups done by Christoph Hellwig. [jejb: fix up for new block bdev exclusive interface. Minor fixes from Randy Dunlap and Dan Carpenter.] Signed-off-by: Nicholas A. Bellinger Signed-off-by: James Bottomley --- drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/target/Kconfig | 32 + drivers/target/Makefile | 24 + drivers/target/target_core_alua.c | 1991 +++++++++ drivers/target/target_core_alua.h | 126 + drivers/target/target_core_cdb.c | 1131 +++++ drivers/target/target_core_configfs.c | 3225 ++++++++++++++ drivers/target/target_core_device.c | 1694 +++++++ drivers/target/target_core_fabric_configfs.c | 996 +++++ drivers/target/target_core_fabric_lib.c | 451 ++ drivers/target/target_core_file.c | 688 +++ drivers/target/target_core_file.h | 50 + drivers/target/target_core_hba.c | 185 + drivers/target/target_core_hba.h | 7 + drivers/target/target_core_iblock.c | 808 ++++ drivers/target/target_core_iblock.h | 40 + drivers/target/target_core_mib.c | 1078 +++++ drivers/target/target_core_mib.h | 28 + drivers/target/target_core_pr.c | 4252 ++++++++++++++++++ drivers/target/target_core_pr.h | 67 + drivers/target/target_core_pscsi.c | 1470 ++++++ drivers/target/target_core_pscsi.h | 65 + drivers/target/target_core_rd.c | 1091 +++++ drivers/target/target_core_rd.h | 73 + drivers/target/target_core_scdb.c | 105 + drivers/target/target_core_scdb.h | 10 + drivers/target/target_core_tmr.c | 404 ++ drivers/target/target_core_tpg.c | 826 ++++ drivers/target/target_core_transport.c | 6134 ++++++++++++++++++++++++++ drivers/target/target_core_ua.c | 332 ++ drivers/target/target_core_ua.h | 36 + 32 files changed, 27422 insertions(+) create mode 100644 drivers/target/Kconfig create mode 100644 drivers/target/Makefile create mode 100644 drivers/target/target_core_alua.c create mode 100644 drivers/target/target_core_alua.h create mode 100644 drivers/target/target_core_cdb.c create mode 100644 drivers/target/target_core_configfs.c create mode 100644 drivers/target/target_core_device.c create mode 100644 drivers/target/target_core_fabric_configfs.c create mode 100644 drivers/target/target_core_fabric_lib.c create mode 100644 drivers/target/target_core_file.c create mode 100644 drivers/target/target_core_file.h create mode 100644 drivers/target/target_core_hba.c create mode 100644 drivers/target/target_core_hba.h create mode 100644 drivers/target/target_core_iblock.c create mode 100644 drivers/target/target_core_iblock.h create mode 100644 drivers/target/target_core_mib.c create mode 100644 drivers/target/target_core_mib.h create mode 100644 drivers/target/target_core_pr.c create mode 100644 drivers/target/target_core_pr.h create mode 100644 drivers/target/target_core_pscsi.c create mode 100644 drivers/target/target_core_pscsi.h create mode 100644 drivers/target/target_core_rd.c create mode 100644 drivers/target/target_core_rd.h create mode 100644 drivers/target/target_core_scdb.c create mode 100644 drivers/target/target_core_scdb.h create mode 100644 drivers/target/target_core_tmr.c create mode 100644 drivers/target/target_core_tpg.c create mode 100644 drivers/target/target_core_transport.c create mode 100644 drivers/target/target_core_ua.c create mode 100644 drivers/target/target_core_ua.h (limited to 'drivers') diff --git a/drivers/Kconfig b/drivers/Kconfig index dd0a5b5e9bf3..9bfb71ff3a6a 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -26,6 +26,8 @@ source "drivers/ata/Kconfig" source "drivers/md/Kconfig" +source "drivers/target/Kconfig" + source "drivers/message/fusion/Kconfig" source "drivers/firewire/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index ef5132469f58..7eb35f479461 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -46,6 +46,7 @@ obj-y += macintosh/ obj-$(CONFIG_IDE) += ide/ obj-$(CONFIG_SCSI) += scsi/ obj-$(CONFIG_ATA) += ata/ +obj-$(CONFIG_TARGET_CORE) += target/ obj-$(CONFIG_MTD) += mtd/ obj-$(CONFIG_SPI) += spi/ obj-y += net/ diff --git a/drivers/target/Kconfig b/drivers/target/Kconfig new file mode 100644 index 000000000000..2fac3be209ac --- /dev/null +++ b/drivers/target/Kconfig @@ -0,0 +1,32 @@ + +menuconfig TARGET_CORE + tristate "Generic Target Core Mod (TCM) and ConfigFS Infrastructure" + depends on SCSI && BLOCK + select CONFIGFS_FS + default n + help + Say Y or M here to enable the TCM Storage Engine and ConfigFS enabled + control path for target_core_mod. This includes built-in TCM RAMDISK + subsystem logic for virtual LUN 0 access + +if TARGET_CORE + +config TCM_IBLOCK + tristate "TCM/IBLOCK Subsystem Plugin for Linux/BLOCK" + help + Say Y here to enable the TCM/IBLOCK subsystem plugin for non-buffered + access to Linux/Block devices using BIO + +config TCM_FILEIO + tristate "TCM/FILEIO Subsystem Plugin for Linux/VFS" + help + Say Y here to enable the TCM/FILEIO subsystem plugin for buffered + access to Linux/VFS struct file or struct block_device + +config TCM_PSCSI + tristate "TCM/pSCSI Subsystem Plugin for Linux/SCSI" + help + Say Y here to enable the TCM/pSCSI subsystem plugin for non-buffered + passthrough access to Linux/SCSI device + +endif diff --git a/drivers/target/Makefile b/drivers/target/Makefile new file mode 100644 index 000000000000..5cfd70819f08 --- /dev/null +++ b/drivers/target/Makefile @@ -0,0 +1,24 @@ +EXTRA_CFLAGS += -I$(srctree)/drivers/target/ -I$(srctree)/drivers/scsi/ + +target_core_mod-y := target_core_configfs.o \ + target_core_device.o \ + target_core_fabric_configfs.o \ + target_core_fabric_lib.o \ + target_core_hba.o \ + target_core_pr.o \ + target_core_alua.o \ + target_core_scdb.o \ + target_core_tmr.o \ + target_core_tpg.o \ + target_core_transport.o \ + target_core_cdb.o \ + target_core_ua.o \ + target_core_rd.o \ + target_core_mib.o + +obj-$(CONFIG_TARGET_CORE) += target_core_mod.o + +# Subsystem modules +obj-$(CONFIG_TCM_IBLOCK) += target_core_iblock.o +obj-$(CONFIG_TCM_FILEIO) += target_core_file.o +obj-$(CONFIG_TCM_PSCSI) += target_core_pscsi.o diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c new file mode 100644 index 000000000000..2c5fcfed5934 --- /dev/null +++ b/drivers/target/target_core_alua.c @@ -0,0 +1,1991 @@ +/******************************************************************************* + * Filename: target_core_alua.c + * + * This file contains SPC-3 compliant asymmetric logical unit assigntment (ALUA) + * + * Copyright (c) 2009-2010 Rising Tide Systems + * Copyright (c) 2009-2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ******************************************************************************/ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "target_core_alua.h" +#include "target_core_hba.h" +#include "target_core_ua.h" + +static int core_alua_check_transition(int state, int *primary); +static int core_alua_set_tg_pt_secondary_state( + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem, + struct se_port *port, int explict, int offline); + +/* + * REPORT_TARGET_PORT_GROUPS + * + * See spc4r17 section 6.27 + */ +int core_emulate_report_target_port_groups(struct se_cmd *cmd) +{ + struct se_subsystem_dev *su_dev = SE_DEV(cmd)->se_sub_dev; + struct se_port *port; + struct t10_alua_tg_pt_gp *tg_pt_gp; + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem; + unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; + u32 rd_len = 0, off = 4; /* Skip over RESERVED area to first + Target port group descriptor */ + + spin_lock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + list_for_each_entry(tg_pt_gp, &T10_ALUA(su_dev)->tg_pt_gps_list, + tg_pt_gp_list) { + /* + * PREF: Preferred target port bit, determine if this + * bit should be set for port group. + */ + if (tg_pt_gp->tg_pt_gp_pref) + buf[off] = 0x80; + /* + * Set the ASYMMETRIC ACCESS State + */ + buf[off++] |= (atomic_read( + &tg_pt_gp->tg_pt_gp_alua_access_state) & 0xff); + /* + * Set supported ASYMMETRIC ACCESS State bits + */ + buf[off] = 0x80; /* T_SUP */ + buf[off] |= 0x40; /* O_SUP */ + buf[off] |= 0x8; /* U_SUP */ + buf[off] |= 0x4; /* S_SUP */ + buf[off] |= 0x2; /* AN_SUP */ + buf[off++] |= 0x1; /* AO_SUP */ + /* + * TARGET PORT GROUP + */ + buf[off++] = ((tg_pt_gp->tg_pt_gp_id >> 8) & 0xff); + buf[off++] = (tg_pt_gp->tg_pt_gp_id & 0xff); + + off++; /* Skip over Reserved */ + /* + * STATUS CODE + */ + buf[off++] = (tg_pt_gp->tg_pt_gp_alua_access_status & 0xff); + /* + * Vendor Specific field + */ + buf[off++] = 0x00; + /* + * TARGET PORT COUNT + */ + buf[off++] = (tg_pt_gp->tg_pt_gp_members & 0xff); + rd_len += 8; + + spin_lock(&tg_pt_gp->tg_pt_gp_lock); + list_for_each_entry(tg_pt_gp_mem, &tg_pt_gp->tg_pt_gp_mem_list, + tg_pt_gp_mem_list) { + port = tg_pt_gp_mem->tg_pt; + /* + * Start Target Port descriptor format + * + * See spc4r17 section 6.2.7 Table 247 + */ + off += 2; /* Skip over Obsolete */ + /* + * Set RELATIVE TARGET PORT IDENTIFIER + */ + buf[off++] = ((port->sep_rtpi >> 8) & 0xff); + buf[off++] = (port->sep_rtpi & 0xff); + rd_len += 4; + } + spin_unlock(&tg_pt_gp->tg_pt_gp_lock); + } + spin_unlock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + /* + * Set the RETURN DATA LENGTH set in the header of the DataIN Payload + */ + buf[0] = ((rd_len >> 24) & 0xff); + buf[1] = ((rd_len >> 16) & 0xff); + buf[2] = ((rd_len >> 8) & 0xff); + buf[3] = (rd_len & 0xff); + + return 0; +} + +/* + * SET_TARGET_PORT_GROUPS for explict ALUA operation. + * + * See spc4r17 section 6.35 + */ +int core_emulate_set_target_port_groups(struct se_cmd *cmd) +{ + struct se_device *dev = SE_DEV(cmd); + struct se_subsystem_dev *su_dev = SE_DEV(cmd)->se_sub_dev; + struct se_port *port, *l_port = SE_LUN(cmd)->lun_sep; + struct se_node_acl *nacl = SE_SESS(cmd)->se_node_acl; + struct t10_alua_tg_pt_gp *tg_pt_gp = NULL, *l_tg_pt_gp; + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem, *l_tg_pt_gp_mem; + unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; + unsigned char *ptr = &buf[4]; /* Skip over RESERVED area in header */ + u32 len = 4; /* Skip over RESERVED area in header */ + int alua_access_state, primary = 0, rc; + u16 tg_pt_id, rtpi; + + if (!(l_port)) + return PYX_TRANSPORT_LU_COMM_FAILURE; + /* + * Determine if explict ALUA via SET_TARGET_PORT_GROUPS is allowed + * for the local tg_pt_gp. + */ + l_tg_pt_gp_mem = l_port->sep_alua_tg_pt_gp_mem; + if (!(l_tg_pt_gp_mem)) { + printk(KERN_ERR "Unable to access l_port->sep_alua_tg_pt_gp_mem\n"); + return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + } + spin_lock(&l_tg_pt_gp_mem->tg_pt_gp_mem_lock); + l_tg_pt_gp = l_tg_pt_gp_mem->tg_pt_gp; + if (!(l_tg_pt_gp)) { + spin_unlock(&l_tg_pt_gp_mem->tg_pt_gp_mem_lock); + printk(KERN_ERR "Unable to access *l_tg_pt_gp_mem->tg_pt_gp\n"); + return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + } + rc = (l_tg_pt_gp->tg_pt_gp_alua_access_type & TPGS_EXPLICT_ALUA); + spin_unlock(&l_tg_pt_gp_mem->tg_pt_gp_mem_lock); + + if (!(rc)) { + printk(KERN_INFO "Unable to process SET_TARGET_PORT_GROUPS" + " while TPGS_EXPLICT_ALUA is disabled\n"); + return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + } + + while (len < cmd->data_length) { + alua_access_state = (ptr[0] & 0x0f); + /* + * Check the received ALUA access state, and determine if + * the state is a primary or secondary target port asymmetric + * access state. + */ + rc = core_alua_check_transition(alua_access_state, &primary); + if (rc != 0) { + /* + * If the SET TARGET PORT GROUPS attempts to establish + * an invalid combination of target port asymmetric + * access states or attempts to establish an + * unsupported target port asymmetric access state, + * then the command shall be terminated with CHECK + * CONDITION status, with the sense key set to ILLEGAL + * REQUEST, and the additional sense code set to INVALID + * FIELD IN PARAMETER LIST. + */ + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + rc = -1; + /* + * If the ASYMMETRIC ACCESS STATE field (see table 267) + * specifies a primary target port asymmetric access state, + * then the TARGET PORT GROUP OR TARGET PORT field specifies + * a primary target port group for which the primary target + * port asymmetric access state shall be changed. If the + * ASYMMETRIC ACCESS STATE field specifies a secondary target + * port asymmetric access state, then the TARGET PORT GROUP OR + * TARGET PORT field specifies the relative target port + * identifier (see 3.1.120) of the target port for which the + * secondary target port asymmetric access state shall be + * changed. + */ + if (primary) { + tg_pt_id = ((ptr[2] << 8) & 0xff); + tg_pt_id |= (ptr[3] & 0xff); + /* + * Locate the matching target port group ID from + * the global tg_pt_gp list + */ + spin_lock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + list_for_each_entry(tg_pt_gp, + &T10_ALUA(su_dev)->tg_pt_gps_list, + tg_pt_gp_list) { + if (!(tg_pt_gp->tg_pt_gp_valid_id)) + continue; + + if (tg_pt_id != tg_pt_gp->tg_pt_gp_id) + continue; + + atomic_inc(&tg_pt_gp->tg_pt_gp_ref_cnt); + smp_mb__after_atomic_inc(); + spin_unlock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + + rc = core_alua_do_port_transition(tg_pt_gp, + dev, l_port, nacl, + alua_access_state, 1); + + spin_lock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + atomic_dec(&tg_pt_gp->tg_pt_gp_ref_cnt); + smp_mb__after_atomic_dec(); + break; + } + spin_unlock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + /* + * If not matching target port group ID can be located + * throw an exception with ASCQ: INVALID_PARAMETER_LIST + */ + if (rc != 0) + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } else { + /* + * Extact the RELATIVE TARGET PORT IDENTIFIER to identify + * the Target Port in question for the the incoming + * SET_TARGET_PORT_GROUPS op. + */ + rtpi = ((ptr[2] << 8) & 0xff); + rtpi |= (ptr[3] & 0xff); + /* + * Locate the matching relative target port identifer + * for the struct se_device storage object. + */ + spin_lock(&dev->se_port_lock); + list_for_each_entry(port, &dev->dev_sep_list, + sep_list) { + if (port->sep_rtpi != rtpi) + continue; + + tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem; + spin_unlock(&dev->se_port_lock); + + rc = core_alua_set_tg_pt_secondary_state( + tg_pt_gp_mem, port, 1, 1); + + spin_lock(&dev->se_port_lock); + break; + } + spin_unlock(&dev->se_port_lock); + /* + * If not matching relative target port identifier can + * be located, throw an exception with ASCQ: + * INVALID_PARAMETER_LIST + */ + if (rc != 0) + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + + ptr += 4; + len += 4; + } + + return 0; +} + +static inline int core_alua_state_nonoptimized( + struct se_cmd *cmd, + unsigned char *cdb, + int nonop_delay_msecs, + u8 *alua_ascq) +{ + /* + * Set SCF_ALUA_NON_OPTIMIZED here, this value will be checked + * later to determine if processing of this cmd needs to be + * temporarily delayed for the Active/NonOptimized primary access state. + */ + cmd->se_cmd_flags |= SCF_ALUA_NON_OPTIMIZED; + cmd->alua_nonop_delay = nonop_delay_msecs; + return 0; +} + +static inline int core_alua_state_standby( + struct se_cmd *cmd, + unsigned char *cdb, + u8 *alua_ascq) +{ + /* + * Allowed CDBs for ALUA_ACCESS_STATE_STANDBY as defined by + * spc4r17 section 5.9.2.4.4 + */ + switch (cdb[0]) { + case INQUIRY: + case LOG_SELECT: + case LOG_SENSE: + case MODE_SELECT: + case MODE_SENSE: + case REPORT_LUNS: + case RECEIVE_DIAGNOSTIC: + case SEND_DIAGNOSTIC: + case MAINTENANCE_IN: + switch (cdb[1]) { + case MI_REPORT_TARGET_PGS: + return 0; + default: + *alua_ascq = ASCQ_04H_ALUA_TG_PT_STANDBY; + return 1; + } + case MAINTENANCE_OUT: + switch (cdb[1]) { + case MO_SET_TARGET_PGS: + return 0; + default: + *alua_ascq = ASCQ_04H_ALUA_TG_PT_STANDBY; + return 1; + } + case REQUEST_SENSE: + case PERSISTENT_RESERVE_IN: + case PERSISTENT_RESERVE_OUT: + case READ_BUFFER: + case WRITE_BUFFER: + return 0; + default: + *alua_ascq = ASCQ_04H_ALUA_TG_PT_STANDBY; + return 1; + } + + return 0; +} + +static inline int core_alua_state_unavailable( + struct se_cmd *cmd, + unsigned char *cdb, + u8 *alua_ascq) +{ + /* + * Allowed CDBs for ALUA_ACCESS_STATE_UNAVAILABLE as defined by + * spc4r17 section 5.9.2.4.5 + */ + switch (cdb[0]) { + case INQUIRY: + case REPORT_LUNS: + case MAINTENANCE_IN: + switch (cdb[1]) { + case MI_REPORT_TARGET_PGS: + return 0; + default: + *alua_ascq = ASCQ_04H_ALUA_TG_PT_UNAVAILABLE; + return 1; + } + case MAINTENANCE_OUT: + switch (cdb[1]) { + case MO_SET_TARGET_PGS: + return 0; + default: + *alua_ascq = ASCQ_04H_ALUA_TG_PT_UNAVAILABLE; + return 1; + } + case REQUEST_SENSE: + case READ_BUFFER: + case WRITE_BUFFER: + return 0; + default: + *alua_ascq = ASCQ_04H_ALUA_TG_PT_UNAVAILABLE; + return 1; + } + + return 0; +} + +static inline int core_alua_state_transition( + struct se_cmd *cmd, + unsigned char *cdb, + u8 *alua_ascq) +{ + /* + * Allowed CDBs for ALUA_ACCESS_STATE_TRANSITIO as defined by + * spc4r17 section 5.9.2.5 + */ + switch (cdb[0]) { + case INQUIRY: + case REPORT_LUNS: + case MAINTENANCE_IN: + switch (cdb[1]) { + case MI_REPORT_TARGET_PGS: + return 0; + default: + *alua_ascq = ASCQ_04H_ALUA_STATE_TRANSITION; + return 1; + } + case REQUEST_SENSE: + case READ_BUFFER: + case WRITE_BUFFER: + return 0; + default: + *alua_ascq = ASCQ_04H_ALUA_STATE_TRANSITION; + return 1; + } + + return 0; +} + +/* + * Used for alua_type SPC_ALUA_PASSTHROUGH and SPC2_ALUA_DISABLED + * in transport_cmd_sequencer(). This function is assigned to + * struct t10_alua *->state_check() in core_setup_alua() + */ +static int core_alua_state_check_nop( + struct se_cmd *cmd, + unsigned char *cdb, + u8 *alua_ascq) +{ + return 0; +} + +/* + * Used for alua_type SPC3_ALUA_EMULATED in transport_cmd_sequencer(). + * This function is assigned to struct t10_alua *->state_check() in + * core_setup_alua() + * + * Also, this function can return three different return codes to + * signal transport_generic_cmd_sequencer() + * + * return 1: Is used to signal LUN not accecsable, and check condition/not ready + * return 0: Used to signal success + * reutrn -1: Used to signal failure, and invalid cdb field + */ +static int core_alua_state_check( + struct se_cmd *cmd, + unsigned char *cdb, + u8 *alua_ascq) +{ + struct se_lun *lun = SE_LUN(cmd); + struct se_port *port = lun->lun_sep; + struct t10_alua_tg_pt_gp *tg_pt_gp; + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem; + int out_alua_state, nonop_delay_msecs; + + if (!(port)) + return 0; + /* + * First, check for a struct se_port specific secondary ALUA target port + * access state: OFFLINE + */ + if (atomic_read(&port->sep_tg_pt_secondary_offline)) { + *alua_ascq = ASCQ_04H_ALUA_OFFLINE; + printk(KERN_INFO "ALUA: Got secondary offline status for local" + " target port\n"); + *alua_ascq = ASCQ_04H_ALUA_OFFLINE; + return 1; + } + /* + * Second, obtain the struct t10_alua_tg_pt_gp_member pointer to the + * ALUA target port group, to obtain current ALUA access state. + * Otherwise look for the underlying struct se_device association with + * a ALUA logical unit group. + */ + tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem; + spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + tg_pt_gp = tg_pt_gp_mem->tg_pt_gp; + out_alua_state = atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state); + nonop_delay_msecs = tg_pt_gp->tg_pt_gp_nonop_delay_msecs; + spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + /* + * Process ALUA_ACCESS_STATE_ACTIVE_OPTMIZED in a seperate conditional + * statement so the complier knows explictly to check this case first. + * For the Optimized ALUA access state case, we want to process the + * incoming fabric cmd ASAP.. + */ + if (out_alua_state == ALUA_ACCESS_STATE_ACTIVE_OPTMIZED) + return 0; + + switch (out_alua_state) { + case ALUA_ACCESS_STATE_ACTIVE_NON_OPTIMIZED: + return core_alua_state_nonoptimized(cmd, cdb, + nonop_delay_msecs, alua_ascq); + case ALUA_ACCESS_STATE_STANDBY: + return core_alua_state_standby(cmd, cdb, alua_ascq); + case ALUA_ACCESS_STATE_UNAVAILABLE: + return core_alua_state_unavailable(cmd, cdb, alua_ascq); + case ALUA_ACCESS_STATE_TRANSITION: + return core_alua_state_transition(cmd, cdb, alua_ascq); + /* + * OFFLINE is a secondary ALUA target port group access state, that is + * handled above with struct se_port->sep_tg_pt_secondary_offline=1 + */ + case ALUA_ACCESS_STATE_OFFLINE: + default: + printk(KERN_ERR "Unknown ALUA access state: 0x%02x\n", + out_alua_state); + return -1; + } + + return 0; +} + +/* + * Check implict and explict ALUA state change request. + */ +static int core_alua_check_transition(int state, int *primary) +{ + switch (state) { + case ALUA_ACCESS_STATE_ACTIVE_OPTMIZED: + case ALUA_ACCESS_STATE_ACTIVE_NON_OPTIMIZED: + case ALUA_ACCESS_STATE_STANDBY: + case ALUA_ACCESS_STATE_UNAVAILABLE: + /* + * OPTIMIZED, NON-OPTIMIZED, STANDBY and UNAVAILABLE are + * defined as primary target port asymmetric access states. + */ + *primary = 1; + break; + case ALUA_ACCESS_STATE_OFFLINE: + /* + * OFFLINE state is defined as a secondary target port + * asymmetric access state. + */ + *primary = 0; + break; + default: + printk(KERN_ERR "Unknown ALUA access state: 0x%02x\n", state); + return -1; + } + + return 0; +} + +static char *core_alua_dump_state(int state) +{ + switch (state) { + case ALUA_ACCESS_STATE_ACTIVE_OPTMIZED: + return "Active/Optimized"; + case ALUA_ACCESS_STATE_ACTIVE_NON_OPTIMIZED: + return "Active/NonOptimized"; + case ALUA_ACCESS_STATE_STANDBY: + return "Standby"; + case ALUA_ACCESS_STATE_UNAVAILABLE: + return "Unavailable"; + case ALUA_ACCESS_STATE_OFFLINE: + return "Offline"; + default: + return "Unknown"; + } + + return NULL; +} + +char *core_alua_dump_status(int status) +{ + switch (status) { + case ALUA_STATUS_NONE: + return "None"; + case ALUA_STATUS_ALTERED_BY_EXPLICT_STPG: + return "Altered by Explict STPG"; + case ALUA_STATUS_ALTERED_BY_IMPLICT_ALUA: + return "Altered by Implict ALUA"; + default: + return "Unknown"; + } + + return NULL; +} + +/* + * Used by fabric modules to determine when we need to delay processing + * for the Active/NonOptimized paths.. + */ +int core_alua_check_nonop_delay( + struct se_cmd *cmd) +{ + if (!(cmd->se_cmd_flags & SCF_ALUA_NON_OPTIMIZED)) + return 0; + if (in_interrupt()) + return 0; + /* + * The ALUA Active/NonOptimized access state delay can be disabled + * in via configfs with a value of zero + */ + if (!(cmd->alua_nonop_delay)) + return 0; + /* + * struct se_cmd->alua_nonop_delay gets set by a target port group + * defined interval in core_alua_state_nonoptimized() + */ + msleep_interruptible(cmd->alua_nonop_delay); + return 0; +} +EXPORT_SYMBOL(core_alua_check_nonop_delay); + +/* + * Called with tg_pt_gp->tg_pt_gp_md_mutex or tg_pt_gp_mem->sep_tg_pt_md_mutex + * + */ +static int core_alua_write_tpg_metadata( + const char *path, + unsigned char *md_buf, + u32 md_buf_len) +{ + mm_segment_t old_fs; + struct file *file; + struct iovec iov[1]; + int flags = O_RDWR | O_CREAT | O_TRUNC, ret; + + memset(iov, 0, sizeof(struct iovec)); + + file = filp_open(path, flags, 0600); + if (IS_ERR(file) || !file || !file->f_dentry) { + printk(KERN_ERR "filp_open(%s) for ALUA metadata failed\n", + path); + return -ENODEV; + } + + iov[0].iov_base = &md_buf[0]; + iov[0].iov_len = md_buf_len; + + old_fs = get_fs(); + set_fs(get_ds()); + ret = vfs_writev(file, &iov[0], 1, &file->f_pos); + set_fs(old_fs); + + if (ret < 0) { + printk(KERN_ERR "Error writing ALUA metadata file: %s\n", path); + filp_close(file, NULL); + return -EIO; + } + filp_close(file, NULL); + + return 0; +} + +/* + * Called with tg_pt_gp->tg_pt_gp_md_mutex held + */ +static int core_alua_update_tpg_primary_metadata( + struct t10_alua_tg_pt_gp *tg_pt_gp, + int primary_state, + unsigned char *md_buf) +{ + struct se_subsystem_dev *su_dev = tg_pt_gp->tg_pt_gp_su_dev; + struct t10_wwn *wwn = &su_dev->t10_wwn; + char path[ALUA_METADATA_PATH_LEN]; + int len; + + memset(path, 0, ALUA_METADATA_PATH_LEN); + + len = snprintf(md_buf, tg_pt_gp->tg_pt_gp_md_buf_len, + "tg_pt_gp_id=%hu\n" + "alua_access_state=0x%02x\n" + "alua_access_status=0x%02x\n", + tg_pt_gp->tg_pt_gp_id, primary_state, + tg_pt_gp->tg_pt_gp_alua_access_status); + + snprintf(path, ALUA_METADATA_PATH_LEN, + "/var/target/alua/tpgs_%s/%s", &wwn->unit_serial[0], + config_item_name(&tg_pt_gp->tg_pt_gp_group.cg_item)); + + return core_alua_write_tpg_metadata(path, md_buf, len); +} + +static int core_alua_do_transition_tg_pt( + struct t10_alua_tg_pt_gp *tg_pt_gp, + struct se_port *l_port, + struct se_node_acl *nacl, + unsigned char *md_buf, + int new_state, + int explict) +{ + struct se_dev_entry *se_deve; + struct se_lun_acl *lacl; + struct se_port *port; + struct t10_alua_tg_pt_gp_member *mem; + int old_state = 0; + /* + * Save the old primary ALUA access state, and set the current state + * to ALUA_ACCESS_STATE_TRANSITION. + */ + old_state = atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state); + atomic_set(&tg_pt_gp->tg_pt_gp_alua_access_state, + ALUA_ACCESS_STATE_TRANSITION); + tg_pt_gp->tg_pt_gp_alua_access_status = (explict) ? + ALUA_STATUS_ALTERED_BY_EXPLICT_STPG : + ALUA_STATUS_ALTERED_BY_IMPLICT_ALUA; + /* + * Check for the optional ALUA primary state transition delay + */ + if (tg_pt_gp->tg_pt_gp_trans_delay_msecs != 0) + msleep_interruptible(tg_pt_gp->tg_pt_gp_trans_delay_msecs); + + spin_lock(&tg_pt_gp->tg_pt_gp_lock); + list_for_each_entry(mem, &tg_pt_gp->tg_pt_gp_mem_list, + tg_pt_gp_mem_list) { + port = mem->tg_pt; + /* + * After an implicit target port asymmetric access state + * change, a device server shall establish a unit attention + * condition for the initiator port associated with every I_T + * nexus with the additional sense code set to ASYMMETRIC + * ACCESS STATE CHAGED. + * + * After an explicit target port asymmetric access state + * change, a device server shall establish a unit attention + * condition with the additional sense code set to ASYMMETRIC + * ACCESS STATE CHANGED for the initiator port associated with + * every I_T nexus other than the I_T nexus on which the SET + * TARGET PORT GROUPS command + */ + atomic_inc(&mem->tg_pt_gp_mem_ref_cnt); + smp_mb__after_atomic_inc(); + spin_unlock(&tg_pt_gp->tg_pt_gp_lock); + + spin_lock_bh(&port->sep_alua_lock); + list_for_each_entry(se_deve, &port->sep_alua_list, + alua_port_list) { + lacl = se_deve->se_lun_acl; + /* + * se_deve->se_lun_acl pointer may be NULL for a + * entry created without explict Node+MappedLUN ACLs + */ + if (!(lacl)) + continue; + + if (explict && + (nacl != NULL) && (nacl == lacl->se_lun_nacl) && + (l_port != NULL) && (l_port == port)) + continue; + + core_scsi3_ua_allocate(lacl->se_lun_nacl, + se_deve->mapped_lun, 0x2A, + ASCQ_2AH_ASYMMETRIC_ACCESS_STATE_CHANGED); + } + spin_unlock_bh(&port->sep_alua_lock); + + spin_lock(&tg_pt_gp->tg_pt_gp_lock); + atomic_dec(&mem->tg_pt_gp_mem_ref_cnt); + smp_mb__after_atomic_dec(); + } + spin_unlock(&tg_pt_gp->tg_pt_gp_lock); + /* + * Update the ALUA metadata buf that has been allocated in + * core_alua_do_port_transition(), this metadata will be written + * to struct file. + * + * Note that there is the case where we do not want to update the + * metadata when the saved metadata is being parsed in userspace + * when setting the existing port access state and access status. + * + * Also note that the failure to write out the ALUA metadata to + * struct file does NOT affect the actual ALUA transition. + */ + if (tg_pt_gp->tg_pt_gp_write_metadata) { + mutex_lock(&tg_pt_gp->tg_pt_gp_md_mutex); + core_alua_update_tpg_primary_metadata(tg_pt_gp, + new_state, md_buf); + mutex_unlock(&tg_pt_gp->tg_pt_gp_md_mutex); + } + /* + * Set the current primary ALUA access state to the requested new state + */ + atomic_set(&tg_pt_gp->tg_pt_gp_alua_access_state, new_state); + + printk(KERN_INFO "Successful %s ALUA transition TG PT Group: %s ID: %hu" + " from primary access state %s to %s\n", (explict) ? "explict" : + "implict", config_item_name(&tg_pt_gp->tg_pt_gp_group.cg_item), + tg_pt_gp->tg_pt_gp_id, core_alua_dump_state(old_state), + core_alua_dump_state(new_state)); + + return 0; +} + +int core_alua_do_port_transition( + struct t10_alua_tg_pt_gp *l_tg_pt_gp, + struct se_device *l_dev, + struct se_port *l_port, + struct se_node_acl *l_nacl, + int new_state, + int explict) +{ + struct se_device *dev; + struct se_port *port; + struct se_subsystem_dev *su_dev; + struct se_node_acl *nacl; + struct t10_alua_lu_gp *lu_gp; + struct t10_alua_lu_gp_member *lu_gp_mem, *local_lu_gp_mem; + struct t10_alua_tg_pt_gp *tg_pt_gp; + unsigned char *md_buf; + int primary; + + if (core_alua_check_transition(new_state, &primary) != 0) + return -EINVAL; + + md_buf = kzalloc(l_tg_pt_gp->tg_pt_gp_md_buf_len, GFP_KERNEL); + if (!(md_buf)) { + printk("Unable to allocate buf for ALUA metadata\n"); + return -ENOMEM; + } + + local_lu_gp_mem = l_dev->dev_alua_lu_gp_mem; + spin_lock(&local_lu_gp_mem->lu_gp_mem_lock); + lu_gp = local_lu_gp_mem->lu_gp; + atomic_inc(&lu_gp->lu_gp_ref_cnt); + smp_mb__after_atomic_inc(); + spin_unlock(&local_lu_gp_mem->lu_gp_mem_lock); + /* + * For storage objects that are members of the 'default_lu_gp', + * we only do transition on the passed *l_tp_pt_gp, and not + * on all of the matching target port groups IDs in default_lu_gp. + */ + if (!(lu_gp->lu_gp_id)) { + /* + * core_alua_do_transition_tg_pt() will always return + * success. + */ + core_alua_do_transition_tg_pt(l_tg_pt_gp, l_port, l_nacl, + md_buf, new_state, explict); + atomic_dec(&lu_gp->lu_gp_ref_cnt); + smp_mb__after_atomic_dec(); + kfree(md_buf); + return 0; + } + /* + * For all other LU groups aside from 'default_lu_gp', walk all of + * the associated storage objects looking for a matching target port + * group ID from the local target port group. + */ + spin_lock(&lu_gp->lu_gp_lock); + list_for_each_entry(lu_gp_mem, &lu_gp->lu_gp_mem_list, + lu_gp_mem_list) { + + dev = lu_gp_mem->lu_gp_mem_dev; + su_dev = dev->se_sub_dev; + atomic_inc(&lu_gp_mem->lu_gp_mem_ref_cnt); + smp_mb__after_atomic_inc(); + spin_unlock(&lu_gp->lu_gp_lock); + + spin_lock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + list_for_each_entry(tg_pt_gp, + &T10_ALUA(su_dev)->tg_pt_gps_list, + tg_pt_gp_list) { + + if (!(tg_pt_gp->tg_pt_gp_valid_id)) + continue; + /* + * If the target behavior port asymmetric access state + * is changed for any target port group accessiable via + * a logical unit within a LU group, the target port + * behavior group asymmetric access states for the same + * target port group accessible via other logical units + * in that LU group will also change. + */ + if (l_tg_pt_gp->tg_pt_gp_id != tg_pt_gp->tg_pt_gp_id) + continue; + + if (l_tg_pt_gp == tg_pt_gp) { + port = l_port; + nacl = l_nacl; + } else { + port = NULL; + nacl = NULL; + } + atomic_inc(&tg_pt_gp->tg_pt_gp_ref_cnt); + smp_mb__after_atomic_inc(); + spin_unlock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + /* + * core_alua_do_transition_tg_pt() will always return + * success. + */ + core_alua_do_transition_tg_pt(tg_pt_gp, port, + nacl, md_buf, new_state, explict); + + spin_lock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + atomic_dec(&tg_pt_gp->tg_pt_gp_ref_cnt); + smp_mb__after_atomic_dec(); + } + spin_unlock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + + spin_lock(&lu_gp->lu_gp_lock); + atomic_dec(&lu_gp_mem->lu_gp_mem_ref_cnt); + smp_mb__after_atomic_dec(); + } + spin_unlock(&lu_gp->lu_gp_lock); + + printk(KERN_INFO "Successfully processed LU Group: %s all ALUA TG PT" + " Group IDs: %hu %s transition to primary state: %s\n", + config_item_name(&lu_gp->lu_gp_group.cg_item), + l_tg_pt_gp->tg_pt_gp_id, (explict) ? "explict" : "implict", + core_alua_dump_state(new_state)); + + atomic_dec(&lu_gp->lu_gp_ref_cnt); + smp_mb__after_atomic_dec(); + kfree(md_buf); + return 0; +} + +/* + * Called with tg_pt_gp_mem->sep_tg_pt_md_mutex held + */ +static int core_alua_update_tpg_secondary_metadata( + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem, + struct se_port *port, + unsigned char *md_buf, + u32 md_buf_len) +{ + struct se_portal_group *se_tpg = port->sep_tpg; + char path[ALUA_METADATA_PATH_LEN], wwn[ALUA_SECONDARY_METADATA_WWN_LEN]; + int len; + + memset(path, 0, ALUA_METADATA_PATH_LEN); + memset(wwn, 0, ALUA_SECONDARY_METADATA_WWN_LEN); + + len = snprintf(wwn, ALUA_SECONDARY_METADATA_WWN_LEN, "%s", + TPG_TFO(se_tpg)->tpg_get_wwn(se_tpg)); + + if (TPG_TFO(se_tpg)->tpg_get_tag != NULL) + snprintf(wwn+len, ALUA_SECONDARY_METADATA_WWN_LEN-len, "+%hu", + TPG_TFO(se_tpg)->tpg_get_tag(se_tpg)); + + len = snprintf(md_buf, md_buf_len, "alua_tg_pt_offline=%d\n" + "alua_tg_pt_status=0x%02x\n", + atomic_read(&port->sep_tg_pt_secondary_offline), + port->sep_tg_pt_secondary_stat); + + snprintf(path, ALUA_METADATA_PATH_LEN, "/var/target/alua/%s/%s/lun_%u", + TPG_TFO(se_tpg)->get_fabric_name(), wwn, + port->sep_lun->unpacked_lun); + + return core_alua_write_tpg_metadata(path, md_buf, len); +} + +static int core_alua_set_tg_pt_secondary_state( + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem, + struct se_port *port, + int explict, + int offline) +{ + struct t10_alua_tg_pt_gp *tg_pt_gp; + unsigned char *md_buf; + u32 md_buf_len; + int trans_delay_msecs; + + spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + tg_pt_gp = tg_pt_gp_mem->tg_pt_gp; + if (!(tg_pt_gp)) { + spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + printk(KERN_ERR "Unable to complete secondary state" + " transition\n"); + return -1; + } + trans_delay_msecs = tg_pt_gp->tg_pt_gp_trans_delay_msecs; + /* + * Set the secondary ALUA target port access state to OFFLINE + * or release the previously secondary state for struct se_port + */ + if (offline) + atomic_set(&port->sep_tg_pt_secondary_offline, 1); + else + atomic_set(&port->sep_tg_pt_secondary_offline, 0); + + md_buf_len = tg_pt_gp->tg_pt_gp_md_buf_len; + port->sep_tg_pt_secondary_stat = (explict) ? + ALUA_STATUS_ALTERED_BY_EXPLICT_STPG : + ALUA_STATUS_ALTERED_BY_IMPLICT_ALUA; + + printk(KERN_INFO "Successful %s ALUA transition TG PT Group: %s ID: %hu" + " to secondary access state: %s\n", (explict) ? "explict" : + "implict", config_item_name(&tg_pt_gp->tg_pt_gp_group.cg_item), + tg_pt_gp->tg_pt_gp_id, (offline) ? "OFFLINE" : "ONLINE"); + + spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + /* + * Do the optional transition delay after we set the secondary + * ALUA access state. + */ + if (trans_delay_msecs != 0) + msleep_interruptible(trans_delay_msecs); + /* + * See if we need to update the ALUA fabric port metadata for + * secondary state and status + */ + if (port->sep_tg_pt_secondary_write_md) { + md_buf = kzalloc(md_buf_len, GFP_KERNEL); + if (!(md_buf)) { + printk(KERN_ERR "Unable to allocate md_buf for" + " secondary ALUA access metadata\n"); + return -1; + } + mutex_lock(&port->sep_tg_pt_md_mutex); + core_alua_update_tpg_secondary_metadata(tg_pt_gp_mem, port, + md_buf, md_buf_len); + mutex_unlock(&port->sep_tg_pt_md_mutex); + + kfree(md_buf); + } + + return 0; +} + +struct t10_alua_lu_gp * +core_alua_allocate_lu_gp(const char *name, int def_group) +{ + struct t10_alua_lu_gp *lu_gp; + + lu_gp = kmem_cache_zalloc(t10_alua_lu_gp_cache, GFP_KERNEL); + if (!(lu_gp)) { + printk(KERN_ERR "Unable to allocate struct t10_alua_lu_gp\n"); + return ERR_PTR(-ENOMEM);; + } + INIT_LIST_HEAD(&lu_gp->lu_gp_list); + INIT_LIST_HEAD(&lu_gp->lu_gp_mem_list); + spin_lock_init(&lu_gp->lu_gp_lock); + atomic_set(&lu_gp->lu_gp_ref_cnt, 0); + + if (def_group) { + lu_gp->lu_gp_id = se_global->alua_lu_gps_counter++;; + lu_gp->lu_gp_valid_id = 1; + se_global->alua_lu_gps_count++; + } + + return lu_gp; +} + +int core_alua_set_lu_gp_id(struct t10_alua_lu_gp *lu_gp, u16 lu_gp_id) +{ + struct t10_alua_lu_gp *lu_gp_tmp; + u16 lu_gp_id_tmp; + /* + * The lu_gp->lu_gp_id may only be set once.. + */ + if (lu_gp->lu_gp_valid_id) { + printk(KERN_WARNING "ALUA LU Group already has a valid ID," + " ignoring request\n"); + return -1; + } + + spin_lock(&se_global->lu_gps_lock); + if (se_global->alua_lu_gps_count == 0x0000ffff) { + printk(KERN_ERR "Maximum ALUA se_global->alua_lu_gps_count:" + " 0x0000ffff reached\n"); + spin_unlock(&se_global->lu_gps_lock); + kmem_cache_free(t10_alua_lu_gp_cache, lu_gp); + return -1; + } +again: + lu_gp_id_tmp = (lu_gp_id != 0) ? lu_gp_id : + se_global->alua_lu_gps_counter++; + + list_for_each_entry(lu_gp_tmp, &se_global->g_lu_gps_list, lu_gp_list) { + if (lu_gp_tmp->lu_gp_id == lu_gp_id_tmp) { + if (!(lu_gp_id)) + goto again; + + printk(KERN_WARNING "ALUA Logical Unit Group ID: %hu" + " already exists, ignoring request\n", + lu_gp_id); + spin_unlock(&se_global->lu_gps_lock); + return -1; + } + } + + lu_gp->lu_gp_id = lu_gp_id_tmp; + lu_gp->lu_gp_valid_id = 1; + list_add_tail(&lu_gp->lu_gp_list, &se_global->g_lu_gps_list); + se_global->alua_lu_gps_count++; + spin_unlock(&se_global->lu_gps_lock); + + return 0; +} + +static struct t10_alua_lu_gp_member * +core_alua_allocate_lu_gp_mem(struct se_device *dev) +{ + struct t10_alua_lu_gp_member *lu_gp_mem; + + lu_gp_mem = kmem_cache_zalloc(t10_alua_lu_gp_mem_cache, GFP_KERNEL); + if (!(lu_gp_mem)) { + printk(KERN_ERR "Unable to allocate struct t10_alua_lu_gp_member\n"); + return ERR_PTR(-ENOMEM); + } + INIT_LIST_HEAD(&lu_gp_mem->lu_gp_mem_list); + spin_lock_init(&lu_gp_mem->lu_gp_mem_lock); + atomic_set(&lu_gp_mem->lu_gp_mem_ref_cnt, 0); + + lu_gp_mem->lu_gp_mem_dev = dev; + dev->dev_alua_lu_gp_mem = lu_gp_mem; + + return lu_gp_mem; +} + +void core_alua_free_lu_gp(struct t10_alua_lu_gp *lu_gp) +{ + struct t10_alua_lu_gp_member *lu_gp_mem, *lu_gp_mem_tmp; + /* + * Once we have reached this point, config_item_put() has + * already been called from target_core_alua_drop_lu_gp(). + * + * Here, we remove the *lu_gp from the global list so that + * no associations can be made while we are releasing + * struct t10_alua_lu_gp. + */ + spin_lock(&se_global->lu_gps_lock); + atomic_set(&lu_gp->lu_gp_shutdown, 1); + list_del(&lu_gp->lu_gp_list); + se_global->alua_lu_gps_count--; + spin_unlock(&se_global->lu_gps_lock); + /* + * Allow struct t10_alua_lu_gp * referenced by core_alua_get_lu_gp_by_name() + * in target_core_configfs.c:target_core_store_alua_lu_gp() to be + * released with core_alua_put_lu_gp_from_name() + */ + while (atomic_read(&lu_gp->lu_gp_ref_cnt)) + cpu_relax(); + /* + * Release reference to struct t10_alua_lu_gp * from all associated + * struct se_device. + */ + spin_lock(&lu_gp->lu_gp_lock); + list_for_each_entry_safe(lu_gp_mem, lu_gp_mem_tmp, + &lu_gp->lu_gp_mem_list, lu_gp_mem_list) { + if (lu_gp_mem->lu_gp_assoc) { + list_del(&lu_gp_mem->lu_gp_mem_list); + lu_gp->lu_gp_members--; + lu_gp_mem->lu_gp_assoc = 0; + } + spin_unlock(&lu_gp->lu_gp_lock); + /* + * + * lu_gp_mem is assoicated with a single + * struct se_device->dev_alua_lu_gp_mem, and is released when + * struct se_device is released via core_alua_free_lu_gp_mem(). + * + * If the passed lu_gp does NOT match the default_lu_gp, assume + * we want to re-assocate a given lu_gp_mem with default_lu_gp. + */ + spin_lock(&lu_gp_mem->lu_gp_mem_lock); + if (lu_gp != se_global->default_lu_gp) + __core_alua_attach_lu_gp_mem(lu_gp_mem, + se_global->default_lu_gp); + else + lu_gp_mem->lu_gp = NULL; + spin_unlock(&lu_gp_mem->lu_gp_mem_lock); + + spin_lock(&lu_gp->lu_gp_lock); + } + spin_unlock(&lu_gp->lu_gp_lock); + + kmem_cache_free(t10_alua_lu_gp_cache, lu_gp); +} + +void core_alua_free_lu_gp_mem(struct se_device *dev) +{ + struct se_subsystem_dev *su_dev = dev->se_sub_dev; + struct t10_alua *alua = T10_ALUA(su_dev); + struct t10_alua_lu_gp *lu_gp; + struct t10_alua_lu_gp_member *lu_gp_mem; + + if (alua->alua_type != SPC3_ALUA_EMULATED) + return; + + lu_gp_mem = dev->dev_alua_lu_gp_mem; + if (!(lu_gp_mem)) + return; + + while (atomic_read(&lu_gp_mem->lu_gp_mem_ref_cnt)) + cpu_relax(); + + spin_lock(&lu_gp_mem->lu_gp_mem_lock); + lu_gp = lu_gp_mem->lu_gp; + if ((lu_gp)) { + spin_lock(&lu_gp->lu_gp_lock); + if (lu_gp_mem->lu_gp_assoc) { + list_del(&lu_gp_mem->lu_gp_mem_list); + lu_gp->lu_gp_members--; + lu_gp_mem->lu_gp_assoc = 0; + } + spin_unlock(&lu_gp->lu_gp_lock); + lu_gp_mem->lu_gp = NULL; + } + spin_unlock(&lu_gp_mem->lu_gp_mem_lock); + + kmem_cache_free(t10_alua_lu_gp_mem_cache, lu_gp_mem); +} + +struct t10_alua_lu_gp *core_alua_get_lu_gp_by_name(const char *name) +{ + struct t10_alua_lu_gp *lu_gp; + struct config_item *ci; + + spin_lock(&se_global->lu_gps_lock); + list_for_each_entry(lu_gp, &se_global->g_lu_gps_list, lu_gp_list) { + if (!(lu_gp->lu_gp_valid_id)) + continue; + ci = &lu_gp->lu_gp_group.cg_item; + if (!(strcmp(config_item_name(ci), name))) { + atomic_inc(&lu_gp->lu_gp_ref_cnt); + spin_unlock(&se_global->lu_gps_lock); + return lu_gp; + } + } + spin_unlock(&se_global->lu_gps_lock); + + return NULL; +} + +void core_alua_put_lu_gp_from_name(struct t10_alua_lu_gp *lu_gp) +{ + spin_lock(&se_global->lu_gps_lock); + atomic_dec(&lu_gp->lu_gp_ref_cnt); + spin_unlock(&se_global->lu_gps_lock); +} + +/* + * Called with struct t10_alua_lu_gp_member->lu_gp_mem_lock + */ +void __core_alua_attach_lu_gp_mem( + struct t10_alua_lu_gp_member *lu_gp_mem, + struct t10_alua_lu_gp *lu_gp) +{ + spin_lock(&lu_gp->lu_gp_lock); + lu_gp_mem->lu_gp = lu_gp; + lu_gp_mem->lu_gp_assoc = 1; + list_add_tail(&lu_gp_mem->lu_gp_mem_list, &lu_gp->lu_gp_mem_list); + lu_gp->lu_gp_members++; + spin_unlock(&lu_gp->lu_gp_lock); +} + +/* + * Called with struct t10_alua_lu_gp_member->lu_gp_mem_lock + */ +void __core_alua_drop_lu_gp_mem( + struct t10_alua_lu_gp_member *lu_gp_mem, + struct t10_alua_lu_gp *lu_gp) +{ + spin_lock(&lu_gp->lu_gp_lock); + list_del(&lu_gp_mem->lu_gp_mem_list); + lu_gp_mem->lu_gp = NULL; + lu_gp_mem->lu_gp_assoc = 0; + lu_gp->lu_gp_members--; + spin_unlock(&lu_gp->lu_gp_lock); +} + +struct t10_alua_tg_pt_gp *core_alua_allocate_tg_pt_gp( + struct se_subsystem_dev *su_dev, + const char *name, + int def_group) +{ + struct t10_alua_tg_pt_gp *tg_pt_gp; + + tg_pt_gp = kmem_cache_zalloc(t10_alua_tg_pt_gp_cache, GFP_KERNEL); + if (!(tg_pt_gp)) { + printk(KERN_ERR "Unable to allocate struct t10_alua_tg_pt_gp\n"); + return NULL; + } + INIT_LIST_HEAD(&tg_pt_gp->tg_pt_gp_list); + INIT_LIST_HEAD(&tg_pt_gp->tg_pt_gp_mem_list); + mutex_init(&tg_pt_gp->tg_pt_gp_md_mutex); + spin_lock_init(&tg_pt_gp->tg_pt_gp_lock); + atomic_set(&tg_pt_gp->tg_pt_gp_ref_cnt, 0); + tg_pt_gp->tg_pt_gp_su_dev = su_dev; + tg_pt_gp->tg_pt_gp_md_buf_len = ALUA_MD_BUF_LEN; + atomic_set(&tg_pt_gp->tg_pt_gp_alua_access_state, + ALUA_ACCESS_STATE_ACTIVE_OPTMIZED); + /* + * Enable both explict and implict ALUA support by default + */ + tg_pt_gp->tg_pt_gp_alua_access_type = + TPGS_EXPLICT_ALUA | TPGS_IMPLICT_ALUA; + /* + * Set the default Active/NonOptimized Delay in milliseconds + */ + tg_pt_gp->tg_pt_gp_nonop_delay_msecs = ALUA_DEFAULT_NONOP_DELAY_MSECS; + tg_pt_gp->tg_pt_gp_trans_delay_msecs = ALUA_DEFAULT_TRANS_DELAY_MSECS; + + if (def_group) { + spin_lock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + tg_pt_gp->tg_pt_gp_id = + T10_ALUA(su_dev)->alua_tg_pt_gps_counter++; + tg_pt_gp->tg_pt_gp_valid_id = 1; + T10_ALUA(su_dev)->alua_tg_pt_gps_count++; + list_add_tail(&tg_pt_gp->tg_pt_gp_list, + &T10_ALUA(su_dev)->tg_pt_gps_list); + spin_unlock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + } + + return tg_pt_gp; +} + +int core_alua_set_tg_pt_gp_id( + struct t10_alua_tg_pt_gp *tg_pt_gp, + u16 tg_pt_gp_id) +{ + struct se_subsystem_dev *su_dev = tg_pt_gp->tg_pt_gp_su_dev; + struct t10_alua_tg_pt_gp *tg_pt_gp_tmp; + u16 tg_pt_gp_id_tmp; + /* + * The tg_pt_gp->tg_pt_gp_id may only be set once.. + */ + if (tg_pt_gp->tg_pt_gp_valid_id) { + printk(KERN_WARNING "ALUA TG PT Group already has a valid ID," + " ignoring request\n"); + return -1; + } + + spin_lock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + if (T10_ALUA(su_dev)->alua_tg_pt_gps_count == 0x0000ffff) { + printk(KERN_ERR "Maximum ALUA alua_tg_pt_gps_count:" + " 0x0000ffff reached\n"); + spin_unlock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + kmem_cache_free(t10_alua_tg_pt_gp_cache, tg_pt_gp); + return -1; + } +again: + tg_pt_gp_id_tmp = (tg_pt_gp_id != 0) ? tg_pt_gp_id : + T10_ALUA(su_dev)->alua_tg_pt_gps_counter++; + + list_for_each_entry(tg_pt_gp_tmp, &T10_ALUA(su_dev)->tg_pt_gps_list, + tg_pt_gp_list) { + if (tg_pt_gp_tmp->tg_pt_gp_id == tg_pt_gp_id_tmp) { + if (!(tg_pt_gp_id)) + goto again; + + printk(KERN_ERR "ALUA Target Port Group ID: %hu already" + " exists, ignoring request\n", tg_pt_gp_id); + spin_unlock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + return -1; + } + } + + tg_pt_gp->tg_pt_gp_id = tg_pt_gp_id_tmp; + tg_pt_gp->tg_pt_gp_valid_id = 1; + list_add_tail(&tg_pt_gp->tg_pt_gp_list, + &T10_ALUA(su_dev)->tg_pt_gps_list); + T10_ALUA(su_dev)->alua_tg_pt_gps_count++; + spin_unlock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + + return 0; +} + +struct t10_alua_tg_pt_gp_member *core_alua_allocate_tg_pt_gp_mem( + struct se_port *port) +{ + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem; + + tg_pt_gp_mem = kmem_cache_zalloc(t10_alua_tg_pt_gp_mem_cache, + GFP_KERNEL); + if (!(tg_pt_gp_mem)) { + printk(KERN_ERR "Unable to allocate struct t10_alua_tg_pt_gp_member\n"); + return ERR_PTR(-ENOMEM); + } + INIT_LIST_HEAD(&tg_pt_gp_mem->tg_pt_gp_mem_list); + spin_lock_init(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + atomic_set(&tg_pt_gp_mem->tg_pt_gp_mem_ref_cnt, 0); + + tg_pt_gp_mem->tg_pt = port; + port->sep_alua_tg_pt_gp_mem = tg_pt_gp_mem; + atomic_set(&port->sep_tg_pt_gp_active, 1); + + return tg_pt_gp_mem; +} + +void core_alua_free_tg_pt_gp( + struct t10_alua_tg_pt_gp *tg_pt_gp) +{ + struct se_subsystem_dev *su_dev = tg_pt_gp->tg_pt_gp_su_dev; + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem, *tg_pt_gp_mem_tmp; + /* + * Once we have reached this point, config_item_put() has already + * been called from target_core_alua_drop_tg_pt_gp(). + * + * Here we remove *tg_pt_gp from the global list so that + * no assications *OR* explict ALUA via SET_TARGET_PORT_GROUPS + * can be made while we are releasing struct t10_alua_tg_pt_gp. + */ + spin_lock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + list_del(&tg_pt_gp->tg_pt_gp_list); + T10_ALUA(su_dev)->alua_tg_pt_gps_counter--; + spin_unlock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + /* + * Allow a struct t10_alua_tg_pt_gp_member * referenced by + * core_alua_get_tg_pt_gp_by_name() in + * target_core_configfs.c:target_core_store_alua_tg_pt_gp() + * to be released with core_alua_put_tg_pt_gp_from_name(). + */ + while (atomic_read(&tg_pt_gp->tg_pt_gp_ref_cnt)) + cpu_relax(); + /* + * Release reference to struct t10_alua_tg_pt_gp from all associated + * struct se_port. + */ + spin_lock(&tg_pt_gp->tg_pt_gp_lock); + list_for_each_entry_safe(tg_pt_gp_mem, tg_pt_gp_mem_tmp, + &tg_pt_gp->tg_pt_gp_mem_list, tg_pt_gp_mem_list) { + if (tg_pt_gp_mem->tg_pt_gp_assoc) { + list_del(&tg_pt_gp_mem->tg_pt_gp_mem_list); + tg_pt_gp->tg_pt_gp_members--; + tg_pt_gp_mem->tg_pt_gp_assoc = 0; + } + spin_unlock(&tg_pt_gp->tg_pt_gp_lock); + /* + * tg_pt_gp_mem is assoicated with a single + * se_port->sep_alua_tg_pt_gp_mem, and is released via + * core_alua_free_tg_pt_gp_mem(). + * + * If the passed tg_pt_gp does NOT match the default_tg_pt_gp, + * assume we want to re-assocate a given tg_pt_gp_mem with + * default_tg_pt_gp. + */ + spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + if (tg_pt_gp != T10_ALUA(su_dev)->default_tg_pt_gp) { + __core_alua_attach_tg_pt_gp_mem(tg_pt_gp_mem, + T10_ALUA(su_dev)->default_tg_pt_gp); + } else + tg_pt_gp_mem->tg_pt_gp = NULL; + spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + + spin_lock(&tg_pt_gp->tg_pt_gp_lock); + } + spin_unlock(&tg_pt_gp->tg_pt_gp_lock); + + kmem_cache_free(t10_alua_tg_pt_gp_cache, tg_pt_gp); +} + +void core_alua_free_tg_pt_gp_mem(struct se_port *port) +{ + struct se_subsystem_dev *su_dev = port->sep_lun->lun_se_dev->se_sub_dev; + struct t10_alua *alua = T10_ALUA(su_dev); + struct t10_alua_tg_pt_gp *tg_pt_gp; + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem; + + if (alua->alua_type != SPC3_ALUA_EMULATED) + return; + + tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem; + if (!(tg_pt_gp_mem)) + return; + + while (atomic_read(&tg_pt_gp_mem->tg_pt_gp_mem_ref_cnt)) + cpu_relax(); + + spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + tg_pt_gp = tg_pt_gp_mem->tg_pt_gp; + if ((tg_pt_gp)) { + spin_lock(&tg_pt_gp->tg_pt_gp_lock); + if (tg_pt_gp_mem->tg_pt_gp_assoc) { + list_del(&tg_pt_gp_mem->tg_pt_gp_mem_list); + tg_pt_gp->tg_pt_gp_members--; + tg_pt_gp_mem->tg_pt_gp_assoc = 0; + } + spin_unlock(&tg_pt_gp->tg_pt_gp_lock); + tg_pt_gp_mem->tg_pt_gp = NULL; + } + spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + + kmem_cache_free(t10_alua_tg_pt_gp_mem_cache, tg_pt_gp_mem); +} + +static struct t10_alua_tg_pt_gp *core_alua_get_tg_pt_gp_by_name( + struct se_subsystem_dev *su_dev, + const char *name) +{ + struct t10_alua_tg_pt_gp *tg_pt_gp; + struct config_item *ci; + + spin_lock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + list_for_each_entry(tg_pt_gp, &T10_ALUA(su_dev)->tg_pt_gps_list, + tg_pt_gp_list) { + if (!(tg_pt_gp->tg_pt_gp_valid_id)) + continue; + ci = &tg_pt_gp->tg_pt_gp_group.cg_item; + if (!(strcmp(config_item_name(ci), name))) { + atomic_inc(&tg_pt_gp->tg_pt_gp_ref_cnt); + spin_unlock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + return tg_pt_gp; + } + } + spin_unlock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + + return NULL; +} + +static void core_alua_put_tg_pt_gp_from_name( + struct t10_alua_tg_pt_gp *tg_pt_gp) +{ + struct se_subsystem_dev *su_dev = tg_pt_gp->tg_pt_gp_su_dev; + + spin_lock(&T10_ALUA(su_dev)->tg_pt_gps_lock); + atomic_dec(&tg_pt_gp->tg_pt_gp_ref_cnt); + spin_unlock(&T10_ALUA(su_dev)->tg_pt_gps_lock); +} + +/* + * Called with struct t10_alua_tg_pt_gp_member->tg_pt_gp_mem_lock held + */ +void __core_alua_attach_tg_pt_gp_mem( + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem, + struct t10_alua_tg_pt_gp *tg_pt_gp) +{ + spin_lock(&tg_pt_gp->tg_pt_gp_lock); + tg_pt_gp_mem->tg_pt_gp = tg_pt_gp; + tg_pt_gp_mem->tg_pt_gp_assoc = 1; + list_add_tail(&tg_pt_gp_mem->tg_pt_gp_mem_list, + &tg_pt_gp->tg_pt_gp_mem_list); + tg_pt_gp->tg_pt_gp_members++; + spin_unlock(&tg_pt_gp->tg_pt_gp_lock); +} + +/* + * Called with struct t10_alua_tg_pt_gp_member->tg_pt_gp_mem_lock held + */ +static void __core_alua_drop_tg_pt_gp_mem( + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem, + struct t10_alua_tg_pt_gp *tg_pt_gp) +{ + spin_lock(&tg_pt_gp->tg_pt_gp_lock); + list_del(&tg_pt_gp_mem->tg_pt_gp_mem_list); + tg_pt_gp_mem->tg_pt_gp = NULL; + tg_pt_gp_mem->tg_pt_gp_assoc = 0; + tg_pt_gp->tg_pt_gp_members--; + spin_unlock(&tg_pt_gp->tg_pt_gp_lock); +} + +ssize_t core_alua_show_tg_pt_gp_info(struct se_port *port, char *page) +{ + struct se_subsystem_dev *su_dev = port->sep_lun->lun_se_dev->se_sub_dev; + struct config_item *tg_pt_ci; + struct t10_alua *alua = T10_ALUA(su_dev); + struct t10_alua_tg_pt_gp *tg_pt_gp; + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem; + ssize_t len = 0; + + if (alua->alua_type != SPC3_ALUA_EMULATED) + return len; + + tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem; + if (!(tg_pt_gp_mem)) + return len; + + spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + tg_pt_gp = tg_pt_gp_mem->tg_pt_gp; + if ((tg_pt_gp)) { + tg_pt_ci = &tg_pt_gp->tg_pt_gp_group.cg_item; + len += sprintf(page, "TG Port Alias: %s\nTG Port Group ID:" + " %hu\nTG Port Primary Access State: %s\nTG Port " + "Primary Access Status: %s\nTG Port Secondary Access" + " State: %s\nTG Port Secondary Access Status: %s\n", + config_item_name(tg_pt_ci), tg_pt_gp->tg_pt_gp_id, + core_alua_dump_state(atomic_read( + &tg_pt_gp->tg_pt_gp_alua_access_state)), + core_alua_dump_status( + tg_pt_gp->tg_pt_gp_alua_access_status), + (atomic_read(&port->sep_tg_pt_secondary_offline)) ? + "Offline" : "None", + core_alua_dump_status(port->sep_tg_pt_secondary_stat)); + } + spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + + return len; +} + +ssize_t core_alua_store_tg_pt_gp_info( + struct se_port *port, + const char *page, + size_t count) +{ + struct se_portal_group *tpg; + struct se_lun *lun; + struct se_subsystem_dev *su_dev = port->sep_lun->lun_se_dev->se_sub_dev; + struct t10_alua_tg_pt_gp *tg_pt_gp = NULL, *tg_pt_gp_new = NULL; + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem; + unsigned char buf[TG_PT_GROUP_NAME_BUF]; + int move = 0; + + tpg = port->sep_tpg; + lun = port->sep_lun; + + if (T10_ALUA(su_dev)->alua_type != SPC3_ALUA_EMULATED) { + printk(KERN_WARNING "SPC3_ALUA_EMULATED not enabled for" + " %s/tpgt_%hu/%s\n", TPG_TFO(tpg)->tpg_get_wwn(tpg), + TPG_TFO(tpg)->tpg_get_tag(tpg), + config_item_name(&lun->lun_group.cg_item)); + return -EINVAL; + } + + if (count > TG_PT_GROUP_NAME_BUF) { + printk(KERN_ERR "ALUA Target Port Group alias too large!\n"); + return -EINVAL; + } + memset(buf, 0, TG_PT_GROUP_NAME_BUF); + memcpy(buf, page, count); + /* + * Any ALUA target port group alias besides "NULL" means we will be + * making a new group association. + */ + if (strcmp(strstrip(buf), "NULL")) { + /* + * core_alua_get_tg_pt_gp_by_name() will increment reference to + * struct t10_alua_tg_pt_gp. This reference is released with + * core_alua_put_tg_pt_gp_from_name() below. + */ + tg_pt_gp_new = core_alua_get_tg_pt_gp_by_name(su_dev, + strstrip(buf)); + if (!(tg_pt_gp_new)) + return -ENODEV; + } + tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem; + if (!(tg_pt_gp_mem)) { + if (tg_pt_gp_new) + core_alua_put_tg_pt_gp_from_name(tg_pt_gp_new); + printk(KERN_ERR "NULL struct se_port->sep_alua_tg_pt_gp_mem pointer\n"); + return -EINVAL; + } + + spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + tg_pt_gp = tg_pt_gp_mem->tg_pt_gp; + if ((tg_pt_gp)) { + /* + * Clearing an existing tg_pt_gp association, and replacing + * with the default_tg_pt_gp. + */ + if (!(tg_pt_gp_new)) { + printk(KERN_INFO "Target_Core_ConfigFS: Moving" + " %s/tpgt_%hu/%s from ALUA Target Port Group:" + " alua/%s, ID: %hu back to" + " default_tg_pt_gp\n", + TPG_TFO(tpg)->tpg_get_wwn(tpg), + TPG_TFO(tpg)->tpg_get_tag(tpg), + config_item_name(&lun->lun_group.cg_item), + config_item_name( + &tg_pt_gp->tg_pt_gp_group.cg_item), + tg_pt_gp->tg_pt_gp_id); + + __core_alua_drop_tg_pt_gp_mem(tg_pt_gp_mem, tg_pt_gp); + __core_alua_attach_tg_pt_gp_mem(tg_pt_gp_mem, + T10_ALUA(su_dev)->default_tg_pt_gp); + spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + + return count; + } + /* + * Removing existing association of tg_pt_gp_mem with tg_pt_gp + */ + __core_alua_drop_tg_pt_gp_mem(tg_pt_gp_mem, tg_pt_gp); + move = 1; + } + /* + * Associate tg_pt_gp_mem with tg_pt_gp_new. + */ + __core_alua_attach_tg_pt_gp_mem(tg_pt_gp_mem, tg_pt_gp_new); + spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + printk(KERN_INFO "Target_Core_ConfigFS: %s %s/tpgt_%hu/%s to ALUA" + " Target Port Group: alua/%s, ID: %hu\n", (move) ? + "Moving" : "Adding", TPG_TFO(tpg)->tpg_get_wwn(tpg), + TPG_TFO(tpg)->tpg_get_tag(tpg), + config_item_name(&lun->lun_group.cg_item), + config_item_name(&tg_pt_gp_new->tg_pt_gp_group.cg_item), + tg_pt_gp_new->tg_pt_gp_id); + + core_alua_put_tg_pt_gp_from_name(tg_pt_gp_new); + return count; +} + +ssize_t core_alua_show_access_type( + struct t10_alua_tg_pt_gp *tg_pt_gp, + char *page) +{ + if ((tg_pt_gp->tg_pt_gp_alua_access_type & TPGS_EXPLICT_ALUA) && + (tg_pt_gp->tg_pt_gp_alua_access_type & TPGS_IMPLICT_ALUA)) + return sprintf(page, "Implict and Explict\n"); + else if (tg_pt_gp->tg_pt_gp_alua_access_type & TPGS_IMPLICT_ALUA) + return sprintf(page, "Implict\n"); + else if (tg_pt_gp->tg_pt_gp_alua_access_type & TPGS_EXPLICT_ALUA) + return sprintf(page, "Explict\n"); + else + return sprintf(page, "None\n"); +} + +ssize_t core_alua_store_access_type( + struct t10_alua_tg_pt_gp *tg_pt_gp, + const char *page, + size_t count) +{ + unsigned long tmp; + int ret; + + ret = strict_strtoul(page, 0, &tmp); + if (ret < 0) { + printk(KERN_ERR "Unable to extract alua_access_type\n"); + return -EINVAL; + } + if ((tmp != 0) && (tmp != 1) && (tmp != 2) && (tmp != 3)) { + printk(KERN_ERR "Illegal value for alua_access_type:" + " %lu\n", tmp); + return -EINVAL; + } + if (tmp == 3) + tg_pt_gp->tg_pt_gp_alua_access_type = + TPGS_IMPLICT_ALUA | TPGS_EXPLICT_ALUA; + else if (tmp == 2) + tg_pt_gp->tg_pt_gp_alua_access_type = TPGS_EXPLICT_ALUA; + else if (tmp == 1) + tg_pt_gp->tg_pt_gp_alua_access_type = TPGS_IMPLICT_ALUA; + else + tg_pt_gp->tg_pt_gp_alua_access_type = 0; + + return count; +} + +ssize_t core_alua_show_nonop_delay_msecs( + struct t10_alua_tg_pt_gp *tg_pt_gp, + char *page) +{ + return sprintf(page, "%d\n", tg_pt_gp->tg_pt_gp_nonop_delay_msecs); +} + +ssize_t core_alua_store_nonop_delay_msecs( + struct t10_alua_tg_pt_gp *tg_pt_gp, + const char *page, + size_t count) +{ + unsigned long tmp; + int ret; + + ret = strict_strtoul(page, 0, &tmp); + if (ret < 0) { + printk(KERN_ERR "Unable to extract nonop_delay_msecs\n"); + return -EINVAL; + } + if (tmp > ALUA_MAX_NONOP_DELAY_MSECS) { + printk(KERN_ERR "Passed nonop_delay_msecs: %lu, exceeds" + " ALUA_MAX_NONOP_DELAY_MSECS: %d\n", tmp, + ALUA_MAX_NONOP_DELAY_MSECS); + return -EINVAL; + } + tg_pt_gp->tg_pt_gp_nonop_delay_msecs = (int)tmp; + + return count; +} + +ssize_t core_alua_show_trans_delay_msecs( + struct t10_alua_tg_pt_gp *tg_pt_gp, + char *page) +{ + return sprintf(page, "%d\n", tg_pt_gp->tg_pt_gp_trans_delay_msecs); +} + +ssize_t core_alua_store_trans_delay_msecs( + struct t10_alua_tg_pt_gp *tg_pt_gp, + const char *page, + size_t count) +{ + unsigned long tmp; + int ret; + + ret = strict_strtoul(page, 0, &tmp); + if (ret < 0) { + printk(KERN_ERR "Unable to extract trans_delay_msecs\n"); + return -EINVAL; + } + if (tmp > ALUA_MAX_TRANS_DELAY_MSECS) { + printk(KERN_ERR "Passed trans_delay_msecs: %lu, exceeds" + " ALUA_MAX_TRANS_DELAY_MSECS: %d\n", tmp, + ALUA_MAX_TRANS_DELAY_MSECS); + return -EINVAL; + } + tg_pt_gp->tg_pt_gp_trans_delay_msecs = (int)tmp; + + return count; +} + +ssize_t core_alua_show_preferred_bit( + struct t10_alua_tg_pt_gp *tg_pt_gp, + char *page) +{ + return sprintf(page, "%d\n", tg_pt_gp->tg_pt_gp_pref); +} + +ssize_t core_alua_store_preferred_bit( + struct t10_alua_tg_pt_gp *tg_pt_gp, + const char *page, + size_t count) +{ + unsigned long tmp; + int ret; + + ret = strict_strtoul(page, 0, &tmp); + if (ret < 0) { + printk(KERN_ERR "Unable to extract preferred ALUA value\n"); + return -EINVAL; + } + if ((tmp != 0) && (tmp != 1)) { + printk(KERN_ERR "Illegal value for preferred ALUA: %lu\n", tmp); + return -EINVAL; + } + tg_pt_gp->tg_pt_gp_pref = (int)tmp; + + return count; +} + +ssize_t core_alua_show_offline_bit(struct se_lun *lun, char *page) +{ + if (!(lun->lun_sep)) + return -ENODEV; + + return sprintf(page, "%d\n", + atomic_read(&lun->lun_sep->sep_tg_pt_secondary_offline)); +} + +ssize_t core_alua_store_offline_bit( + struct se_lun *lun, + const char *page, + size_t count) +{ + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem; + unsigned long tmp; + int ret; + + if (!(lun->lun_sep)) + return -ENODEV; + + ret = strict_strtoul(page, 0, &tmp); + if (ret < 0) { + printk(KERN_ERR "Unable to extract alua_tg_pt_offline value\n"); + return -EINVAL; + } + if ((tmp != 0) && (tmp != 1)) { + printk(KERN_ERR "Illegal value for alua_tg_pt_offline: %lu\n", + tmp); + return -EINVAL; + } + tg_pt_gp_mem = lun->lun_sep->sep_alua_tg_pt_gp_mem; + if (!(tg_pt_gp_mem)) { + printk(KERN_ERR "Unable to locate *tg_pt_gp_mem\n"); + return -EINVAL; + } + + ret = core_alua_set_tg_pt_secondary_state(tg_pt_gp_mem, + lun->lun_sep, 0, (int)tmp); + if (ret < 0) + return -EINVAL; + + return count; +} + +ssize_t core_alua_show_secondary_status( + struct se_lun *lun, + char *page) +{ + return sprintf(page, "%d\n", lun->lun_sep->sep_tg_pt_secondary_stat); +} + +ssize_t core_alua_store_secondary_status( + struct se_lun *lun, + const char *page, + size_t count) +{ + unsigned long tmp; + int ret; + + ret = strict_strtoul(page, 0, &tmp); + if (ret < 0) { + printk(KERN_ERR "Unable to extract alua_tg_pt_status\n"); + return -EINVAL; + } + if ((tmp != ALUA_STATUS_NONE) && + (tmp != ALUA_STATUS_ALTERED_BY_EXPLICT_STPG) && + (tmp != ALUA_STATUS_ALTERED_BY_IMPLICT_ALUA)) { + printk(KERN_ERR "Illegal value for alua_tg_pt_status: %lu\n", + tmp); + return -EINVAL; + } + lun->lun_sep->sep_tg_pt_secondary_stat = (int)tmp; + + return count; +} + +ssize_t core_alua_show_secondary_write_metadata( + struct se_lun *lun, + char *page) +{ + return sprintf(page, "%d\n", + lun->lun_sep->sep_tg_pt_secondary_write_md); +} + +ssize_t core_alua_store_secondary_write_metadata( + struct se_lun *lun, + const char *page, + size_t count) +{ + unsigned long tmp; + int ret; + + ret = strict_strtoul(page, 0, &tmp); + if (ret < 0) { + printk(KERN_ERR "Unable to extract alua_tg_pt_write_md\n"); + return -EINVAL; + } + if ((tmp != 0) && (tmp != 1)) { + printk(KERN_ERR "Illegal value for alua_tg_pt_write_md:" + " %lu\n", tmp); + return -EINVAL; + } + lun->lun_sep->sep_tg_pt_secondary_write_md = (int)tmp; + + return count; +} + +int core_setup_alua(struct se_device *dev, int force_pt) +{ + struct se_subsystem_dev *su_dev = dev->se_sub_dev; + struct t10_alua *alua = T10_ALUA(su_dev); + struct t10_alua_lu_gp_member *lu_gp_mem; + /* + * If this device is from Target_Core_Mod/pSCSI, use the ALUA logic + * of the Underlying SCSI hardware. In Linux/SCSI terms, this can + * cause a problem because libata and some SATA RAID HBAs appear + * under Linux/SCSI, but emulate SCSI logic themselves. + */ + if (((TRANSPORT(dev)->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) && + !(DEV_ATTRIB(dev)->emulate_alua)) || force_pt) { + alua->alua_type = SPC_ALUA_PASSTHROUGH; + alua->alua_state_check = &core_alua_state_check_nop; + printk(KERN_INFO "%s: Using SPC_ALUA_PASSTHROUGH, no ALUA" + " emulation\n", TRANSPORT(dev)->name); + return 0; + } + /* + * If SPC-3 or above is reported by real or emulated struct se_device, + * use emulated ALUA. + */ + if (TRANSPORT(dev)->get_device_rev(dev) >= SCSI_3) { + printk(KERN_INFO "%s: Enabling ALUA Emulation for SPC-3" + " device\n", TRANSPORT(dev)->name); + /* + * Assoicate this struct se_device with the default ALUA + * LUN Group. + */ + lu_gp_mem = core_alua_allocate_lu_gp_mem(dev); + if (IS_ERR(lu_gp_mem) || !lu_gp_mem) + return -1; + + alua->alua_type = SPC3_ALUA_EMULATED; + alua->alua_state_check = &core_alua_state_check; + spin_lock(&lu_gp_mem->lu_gp_mem_lock); + __core_alua_attach_lu_gp_mem(lu_gp_mem, + se_global->default_lu_gp); + spin_unlock(&lu_gp_mem->lu_gp_mem_lock); + + printk(KERN_INFO "%s: Adding to default ALUA LU Group:" + " core/alua/lu_gps/default_lu_gp\n", + TRANSPORT(dev)->name); + } else { + alua->alua_type = SPC2_ALUA_DISABLED; + alua->alua_state_check = &core_alua_state_check_nop; + printk(KERN_INFO "%s: Disabling ALUA Emulation for SPC-2" + " device\n", TRANSPORT(dev)->name); + } + + return 0; +} diff --git a/drivers/target/target_core_alua.h b/drivers/target/target_core_alua.h new file mode 100644 index 000000000000..c86f97a081ed --- /dev/null +++ b/drivers/target/target_core_alua.h @@ -0,0 +1,126 @@ +#ifndef TARGET_CORE_ALUA_H +#define TARGET_CORE_ALUA_H + +/* + * INQUIRY response data, TPGS Field + * + * from spc4r17 section 6.4.2 Table 135 + */ +#define TPGS_NO_ALUA 0x00 +#define TPGS_IMPLICT_ALUA 0x10 +#define TPGS_EXPLICT_ALUA 0x20 + +/* + * ASYMMETRIC ACCESS STATE field + * + * from spc4r17 section 6.27 Table 245 + */ +#define ALUA_ACCESS_STATE_ACTIVE_OPTMIZED 0x0 +#define ALUA_ACCESS_STATE_ACTIVE_NON_OPTIMIZED 0x1 +#define ALUA_ACCESS_STATE_STANDBY 0x2 +#define ALUA_ACCESS_STATE_UNAVAILABLE 0x3 +#define ALUA_ACCESS_STATE_OFFLINE 0xe +#define ALUA_ACCESS_STATE_TRANSITION 0xf + +/* + * REPORT_TARGET_PORT_GROUP STATUS CODE + * + * from spc4r17 section 6.27 Table 246 + */ +#define ALUA_STATUS_NONE 0x00 +#define ALUA_STATUS_ALTERED_BY_EXPLICT_STPG 0x01 +#define ALUA_STATUS_ALTERED_BY_IMPLICT_ALUA 0x02 + +/* + * From spc4r17, Table D.1: ASC and ASCQ Assignement + */ +#define ASCQ_04H_ALUA_STATE_TRANSITION 0x0a +#define ASCQ_04H_ALUA_TG_PT_STANDBY 0x0b +#define ASCQ_04H_ALUA_TG_PT_UNAVAILABLE 0x0c +#define ASCQ_04H_ALUA_OFFLINE 0x12 + +/* + * Used as the default for Active/NonOptimized delay (in milliseconds) + * This can also be changed via configfs on a per target port group basis.. + */ +#define ALUA_DEFAULT_NONOP_DELAY_MSECS 100 +#define ALUA_MAX_NONOP_DELAY_MSECS 10000 /* 10 seconds */ +/* + * Used for implict and explict ALUA transitional delay, that is disabled + * by default, and is intended to be used for debugging client side ALUA code. + */ +#define ALUA_DEFAULT_TRANS_DELAY_MSECS 0 +#define ALUA_MAX_TRANS_DELAY_MSECS 30000 /* 30 seconds */ +/* + * Used by core_alua_update_tpg_primary_metadata() and + * core_alua_update_tpg_secondary_metadata() + */ +#define ALUA_METADATA_PATH_LEN 512 +/* + * Used by core_alua_update_tpg_secondary_metadata() + */ +#define ALUA_SECONDARY_METADATA_WWN_LEN 256 + +extern struct kmem_cache *t10_alua_lu_gp_cache; +extern struct kmem_cache *t10_alua_lu_gp_mem_cache; +extern struct kmem_cache *t10_alua_tg_pt_gp_cache; +extern struct kmem_cache *t10_alua_tg_pt_gp_mem_cache; + +extern int core_emulate_report_target_port_groups(struct se_cmd *); +extern int core_emulate_set_target_port_groups(struct se_cmd *); +extern int core_alua_check_nonop_delay(struct se_cmd *); +extern int core_alua_do_port_transition(struct t10_alua_tg_pt_gp *, + struct se_device *, struct se_port *, + struct se_node_acl *, int, int); +extern char *core_alua_dump_status(int); +extern struct t10_alua_lu_gp *core_alua_allocate_lu_gp(const char *, int); +extern int core_alua_set_lu_gp_id(struct t10_alua_lu_gp *, u16); +extern void core_alua_free_lu_gp(struct t10_alua_lu_gp *); +extern void core_alua_free_lu_gp_mem(struct se_device *); +extern struct t10_alua_lu_gp *core_alua_get_lu_gp_by_name(const char *); +extern void core_alua_put_lu_gp_from_name(struct t10_alua_lu_gp *); +extern void __core_alua_attach_lu_gp_mem(struct t10_alua_lu_gp_member *, + struct t10_alua_lu_gp *); +extern void __core_alua_drop_lu_gp_mem(struct t10_alua_lu_gp_member *, + struct t10_alua_lu_gp *); +extern void core_alua_drop_lu_gp_dev(struct se_device *); +extern struct t10_alua_tg_pt_gp *core_alua_allocate_tg_pt_gp( + struct se_subsystem_dev *, const char *, int); +extern int core_alua_set_tg_pt_gp_id(struct t10_alua_tg_pt_gp *, u16); +extern struct t10_alua_tg_pt_gp_member *core_alua_allocate_tg_pt_gp_mem( + struct se_port *); +extern void core_alua_free_tg_pt_gp(struct t10_alua_tg_pt_gp *); +extern void core_alua_free_tg_pt_gp_mem(struct se_port *); +extern void __core_alua_attach_tg_pt_gp_mem(struct t10_alua_tg_pt_gp_member *, + struct t10_alua_tg_pt_gp *); +extern ssize_t core_alua_show_tg_pt_gp_info(struct se_port *, char *); +extern ssize_t core_alua_store_tg_pt_gp_info(struct se_port *, const char *, + size_t); +extern ssize_t core_alua_show_access_type(struct t10_alua_tg_pt_gp *, char *); +extern ssize_t core_alua_store_access_type(struct t10_alua_tg_pt_gp *, + const char *, size_t); +extern ssize_t core_alua_show_nonop_delay_msecs(struct t10_alua_tg_pt_gp *, + char *); +extern ssize_t core_alua_store_nonop_delay_msecs(struct t10_alua_tg_pt_gp *, + const char *, size_t); +extern ssize_t core_alua_show_trans_delay_msecs(struct t10_alua_tg_pt_gp *, + char *); +extern ssize_t core_alua_store_trans_delay_msecs(struct t10_alua_tg_pt_gp *, + const char *, size_t); +extern ssize_t core_alua_show_preferred_bit(struct t10_alua_tg_pt_gp *, + char *); +extern ssize_t core_alua_store_preferred_bit(struct t10_alua_tg_pt_gp *, + const char *, size_t); +extern ssize_t core_alua_show_offline_bit(struct se_lun *, char *); +extern ssize_t core_alua_store_offline_bit(struct se_lun *, const char *, + size_t); +extern ssize_t core_alua_show_secondary_status(struct se_lun *, char *); +extern ssize_t core_alua_store_secondary_status(struct se_lun *, + const char *, size_t); +extern ssize_t core_alua_show_secondary_write_metadata(struct se_lun *, + char *); +extern ssize_t core_alua_store_secondary_write_metadata(struct se_lun *, + const char *, size_t); +extern int core_setup_alua(struct se_device *, int); + +#endif /* TARGET_CORE_ALUA_H */ diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c new file mode 100644 index 000000000000..366080baf474 --- /dev/null +++ b/drivers/target/target_core_cdb.c @@ -0,0 +1,1131 @@ +/* + * CDB emulation for non-READ/WRITE commands. + * + * Copyright (c) 2002, 2003, 2004, 2005 PyX Technologies, Inc. + * Copyright (c) 2005, 2006, 2007 SBE, Inc. + * Copyright (c) 2007-2010 Rising Tide Systems + * Copyright (c) 2008-2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include + +#include +#include +#include +#include "target_core_ua.h" + +static void +target_fill_alua_data(struct se_port *port, unsigned char *buf) +{ + struct t10_alua_tg_pt_gp *tg_pt_gp; + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem; + + /* + * Set SCCS for MAINTENANCE_IN + REPORT_TARGET_PORT_GROUPS. + */ + buf[5] = 0x80; + + /* + * Set TPGS field for explict and/or implict ALUA access type + * and opteration. + * + * See spc4r17 section 6.4.2 Table 135 + */ + if (!port) + return; + tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem; + if (!tg_pt_gp_mem) + return; + + spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + tg_pt_gp = tg_pt_gp_mem->tg_pt_gp; + if (tg_pt_gp) + buf[5] |= tg_pt_gp->tg_pt_gp_alua_access_type; + spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); +} + +static int +target_emulate_inquiry_std(struct se_cmd *cmd) +{ + struct se_lun *lun = SE_LUN(cmd); + struct se_device *dev = SE_DEV(cmd); + unsigned char *buf = cmd->t_task->t_task_buf; + + /* + * Make sure we at least have 6 bytes of INQUIRY response + * payload going back for EVPD=0 + */ + if (cmd->data_length < 6) { + printk(KERN_ERR "SCSI Inquiry payload length: %u" + " too small for EVPD=0\n", cmd->data_length); + return -1; + } + + buf[0] = dev->transport->get_device_type(dev); + if (buf[0] == TYPE_TAPE) + buf[1] = 0x80; + buf[2] = dev->transport->get_device_rev(dev); + + /* + * Enable SCCS and TPGS fields for Emulated ALUA + */ + if (T10_ALUA(dev->se_sub_dev)->alua_type == SPC3_ALUA_EMULATED) + target_fill_alua_data(lun->lun_sep, buf); + + if (cmd->data_length < 8) { + buf[4] = 1; /* Set additional length to 1 */ + return 0; + } + + buf[7] = 0x32; /* Sync=1 and CmdQue=1 */ + + /* + * Do not include vendor, product, reversion info in INQUIRY + * response payload for cdbs with a small allocation length. + */ + if (cmd->data_length < 36) { + buf[4] = 3; /* Set additional length to 3 */ + return 0; + } + + snprintf((unsigned char *)&buf[8], 8, "LIO-ORG"); + snprintf((unsigned char *)&buf[16], 16, "%s", + &DEV_T10_WWN(dev)->model[0]); + snprintf((unsigned char *)&buf[32], 4, "%s", + &DEV_T10_WWN(dev)->revision[0]); + buf[4] = 31; /* Set additional length to 31 */ + return 0; +} + +/* supported vital product data pages */ +static int +target_emulate_evpd_00(struct se_cmd *cmd, unsigned char *buf) +{ + buf[1] = 0x00; + if (cmd->data_length < 8) + return 0; + + buf[4] = 0x0; + /* + * Only report the INQUIRY EVPD=1 pages after a valid NAA + * Registered Extended LUN WWN has been set via ConfigFS + * during device creation/restart. + */ + if (SE_DEV(cmd)->se_sub_dev->su_dev_flags & + SDF_EMULATED_VPD_UNIT_SERIAL) { + buf[3] = 3; + buf[5] = 0x80; + buf[6] = 0x83; + buf[7] = 0x86; + } + + return 0; +} + +/* unit serial number */ +static int +target_emulate_evpd_80(struct se_cmd *cmd, unsigned char *buf) +{ + struct se_device *dev = SE_DEV(cmd); + u16 len = 0; + + buf[1] = 0x80; + if (dev->se_sub_dev->su_dev_flags & + SDF_EMULATED_VPD_UNIT_SERIAL) { + u32 unit_serial_len; + + unit_serial_len = + strlen(&DEV_T10_WWN(dev)->unit_serial[0]); + unit_serial_len++; /* For NULL Terminator */ + + if (((len + 4) + unit_serial_len) > cmd->data_length) { + len += unit_serial_len; + buf[2] = ((len >> 8) & 0xff); + buf[3] = (len & 0xff); + return 0; + } + len += sprintf((unsigned char *)&buf[4], "%s", + &DEV_T10_WWN(dev)->unit_serial[0]); + len++; /* Extra Byte for NULL Terminator */ + buf[3] = len; + } + return 0; +} + +/* + * Device identification VPD, for a complete list of + * DESIGNATOR TYPEs see spc4r17 Table 459. + */ +static int +target_emulate_evpd_83(struct se_cmd *cmd, unsigned char *buf) +{ + struct se_device *dev = SE_DEV(cmd); + struct se_lun *lun = SE_LUN(cmd); + struct se_port *port = NULL; + struct se_portal_group *tpg = NULL; + struct t10_alua_lu_gp_member *lu_gp_mem; + struct t10_alua_tg_pt_gp *tg_pt_gp; + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem; + unsigned char binary, binary_new; + unsigned char *prod = &DEV_T10_WWN(dev)->model[0]; + u32 prod_len; + u32 unit_serial_len, off = 0; + int i; + u16 len = 0, id_len; + + buf[1] = 0x83; + off = 4; + + /* + * NAA IEEE Registered Extended Assigned designator format, see + * spc4r17 section 7.7.3.6.5 + * + * We depend upon a target_core_mod/ConfigFS provided + * /sys/kernel/config/target/core/$HBA/$DEV/wwn/vpd_unit_serial + * value in order to return the NAA id. + */ + if (!(dev->se_sub_dev->su_dev_flags & SDF_EMULATED_VPD_UNIT_SERIAL)) + goto check_t10_vend_desc; + + if (off + 20 > cmd->data_length) + goto check_t10_vend_desc; + + /* CODE SET == Binary */ + buf[off++] = 0x1; + + /* Set ASSOICATION == addressed logical unit: 0)b */ + buf[off] = 0x00; + + /* Identifier/Designator type == NAA identifier */ + buf[off++] = 0x3; + off++; + + /* Identifier/Designator length */ + buf[off++] = 0x10; + + /* + * Start NAA IEEE Registered Extended Identifier/Designator + */ + buf[off++] = (0x6 << 4); + + /* + * Use OpenFabrics IEEE Company ID: 00 14 05 + */ + buf[off++] = 0x01; + buf[off++] = 0x40; + buf[off] = (0x5 << 4); + + /* + * Return ConfigFS Unit Serial Number information for + * VENDOR_SPECIFIC_IDENTIFIER and + * VENDOR_SPECIFIC_IDENTIFIER_EXTENTION + */ + binary = transport_asciihex_to_binaryhex( + &DEV_T10_WWN(dev)->unit_serial[0]); + buf[off++] |= (binary & 0xf0) >> 4; + for (i = 0; i < 24; i += 2) { + binary_new = transport_asciihex_to_binaryhex( + &DEV_T10_WWN(dev)->unit_serial[i+2]); + buf[off] = (binary & 0x0f) << 4; + buf[off++] |= (binary_new & 0xf0) >> 4; + binary = binary_new; + } + len = 20; + off = (len + 4); + +check_t10_vend_desc: + /* + * T10 Vendor Identifier Page, see spc4r17 section 7.7.3.4 + */ + id_len = 8; /* For Vendor field */ + prod_len = 4; /* For VPD Header */ + prod_len += 8; /* For Vendor field */ + prod_len += strlen(prod); + prod_len++; /* For : */ + + if (dev->se_sub_dev->su_dev_flags & + SDF_EMULATED_VPD_UNIT_SERIAL) { + unit_serial_len = + strlen(&DEV_T10_WWN(dev)->unit_serial[0]); + unit_serial_len++; /* For NULL Terminator */ + + if ((len + (id_len + 4) + + (prod_len + unit_serial_len)) > + cmd->data_length) { + len += (prod_len + unit_serial_len); + goto check_port; + } + id_len += sprintf((unsigned char *)&buf[off+12], + "%s:%s", prod, + &DEV_T10_WWN(dev)->unit_serial[0]); + } + buf[off] = 0x2; /* ASCII */ + buf[off+1] = 0x1; /* T10 Vendor ID */ + buf[off+2] = 0x0; + memcpy((unsigned char *)&buf[off+4], "LIO-ORG", 8); + /* Extra Byte for NULL Terminator */ + id_len++; + /* Identifier Length */ + buf[off+3] = id_len; + /* Header size for Designation descriptor */ + len += (id_len + 4); + off += (id_len + 4); + /* + * struct se_port is only set for INQUIRY VPD=1 through $FABRIC_MOD + */ +check_port: + port = lun->lun_sep; + if (port) { + struct t10_alua_lu_gp *lu_gp; + u32 padding, scsi_name_len; + u16 lu_gp_id = 0; + u16 tg_pt_gp_id = 0; + u16 tpgt; + + tpg = port->sep_tpg; + /* + * Relative target port identifer, see spc4r17 + * section 7.7.3.7 + * + * Get the PROTOCOL IDENTIFIER as defined by spc4r17 + * section 7.5.1 Table 362 + */ + if (((len + 4) + 8) > cmd->data_length) { + len += 8; + goto check_tpgi; + } + buf[off] = + (TPG_TFO(tpg)->get_fabric_proto_ident(tpg) << 4); + buf[off++] |= 0x1; /* CODE SET == Binary */ + buf[off] = 0x80; /* Set PIV=1 */ + /* Set ASSOICATION == target port: 01b */ + buf[off] |= 0x10; + /* DESIGNATOR TYPE == Relative target port identifer */ + buf[off++] |= 0x4; + off++; /* Skip over Reserved */ + buf[off++] = 4; /* DESIGNATOR LENGTH */ + /* Skip over Obsolete field in RTPI payload + * in Table 472 */ + off += 2; + buf[off++] = ((port->sep_rtpi >> 8) & 0xff); + buf[off++] = (port->sep_rtpi & 0xff); + len += 8; /* Header size + Designation descriptor */ + /* + * Target port group identifier, see spc4r17 + * section 7.7.3.8 + * + * Get the PROTOCOL IDENTIFIER as defined by spc4r17 + * section 7.5.1 Table 362 + */ +check_tpgi: + if (T10_ALUA(dev->se_sub_dev)->alua_type != + SPC3_ALUA_EMULATED) + goto check_scsi_name; + + if (((len + 4) + 8) > cmd->data_length) { + len += 8; + goto check_lu_gp; + } + tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem; + if (!tg_pt_gp_mem) + goto check_lu_gp; + + spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + tg_pt_gp = tg_pt_gp_mem->tg_pt_gp; + if (!(tg_pt_gp)) { + spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + goto check_lu_gp; + } + tg_pt_gp_id = tg_pt_gp->tg_pt_gp_id; + spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + + buf[off] = + (TPG_TFO(tpg)->get_fabric_proto_ident(tpg) << 4); + buf[off++] |= 0x1; /* CODE SET == Binary */ + buf[off] = 0x80; /* Set PIV=1 */ + /* Set ASSOICATION == target port: 01b */ + buf[off] |= 0x10; + /* DESIGNATOR TYPE == Target port group identifier */ + buf[off++] |= 0x5; + off++; /* Skip over Reserved */ + buf[off++] = 4; /* DESIGNATOR LENGTH */ + off += 2; /* Skip over Reserved Field */ + buf[off++] = ((tg_pt_gp_id >> 8) & 0xff); + buf[off++] = (tg_pt_gp_id & 0xff); + len += 8; /* Header size + Designation descriptor */ + /* + * Logical Unit Group identifier, see spc4r17 + * section 7.7.3.8 + */ +check_lu_gp: + if (((len + 4) + 8) > cmd->data_length) { + len += 8; + goto check_scsi_name; + } + lu_gp_mem = dev->dev_alua_lu_gp_mem; + if (!(lu_gp_mem)) + goto check_scsi_name; + + spin_lock(&lu_gp_mem->lu_gp_mem_lock); + lu_gp = lu_gp_mem->lu_gp; + if (!(lu_gp)) { + spin_unlock(&lu_gp_mem->lu_gp_mem_lock); + goto check_scsi_name; + } + lu_gp_id = lu_gp->lu_gp_id; + spin_unlock(&lu_gp_mem->lu_gp_mem_lock); + + buf[off++] |= 0x1; /* CODE SET == Binary */ + /* DESIGNATOR TYPE == Logical Unit Group identifier */ + buf[off++] |= 0x6; + off++; /* Skip over Reserved */ + buf[off++] = 4; /* DESIGNATOR LENGTH */ + off += 2; /* Skip over Reserved Field */ + buf[off++] = ((lu_gp_id >> 8) & 0xff); + buf[off++] = (lu_gp_id & 0xff); + len += 8; /* Header size + Designation descriptor */ + /* + * SCSI name string designator, see spc4r17 + * section 7.7.3.11 + * + * Get the PROTOCOL IDENTIFIER as defined by spc4r17 + * section 7.5.1 Table 362 + */ +check_scsi_name: + scsi_name_len = strlen(TPG_TFO(tpg)->tpg_get_wwn(tpg)); + /* UTF-8 ",t,0x<16-bit TPGT>" + NULL Terminator */ + scsi_name_len += 10; + /* Check for 4-byte padding */ + padding = ((-scsi_name_len) & 3); + if (padding != 0) + scsi_name_len += padding; + /* Header size + Designation descriptor */ + scsi_name_len += 4; + + if (((len + 4) + scsi_name_len) > cmd->data_length) { + len += scsi_name_len; + goto set_len; + } + buf[off] = + (TPG_TFO(tpg)->get_fabric_proto_ident(tpg) << 4); + buf[off++] |= 0x3; /* CODE SET == UTF-8 */ + buf[off] = 0x80; /* Set PIV=1 */ + /* Set ASSOICATION == target port: 01b */ + buf[off] |= 0x10; + /* DESIGNATOR TYPE == SCSI name string */ + buf[off++] |= 0x8; + off += 2; /* Skip over Reserved and length */ + /* + * SCSI name string identifer containing, $FABRIC_MOD + * dependent information. For LIO-Target and iSCSI + * Target Port, this means ",t,0x in + * UTF-8 encoding. + */ + tpgt = TPG_TFO(tpg)->tpg_get_tag(tpg); + scsi_name_len = sprintf(&buf[off], "%s,t,0x%04x", + TPG_TFO(tpg)->tpg_get_wwn(tpg), tpgt); + scsi_name_len += 1 /* Include NULL terminator */; + /* + * The null-terminated, null-padded (see 4.4.2) SCSI + * NAME STRING field contains a UTF-8 format string. + * The number of bytes in the SCSI NAME STRING field + * (i.e., the value in the DESIGNATOR LENGTH field) + * shall be no larger than 256 and shall be a multiple + * of four. + */ + if (padding) + scsi_name_len += padding; + + buf[off-1] = scsi_name_len; + off += scsi_name_len; + /* Header size + Designation descriptor */ + len += (scsi_name_len + 4); + } +set_len: + buf[2] = ((len >> 8) & 0xff); + buf[3] = (len & 0xff); /* Page Length for VPD 0x83 */ + return 0; +} + +/* Extended INQUIRY Data VPD Page */ +static int +target_emulate_evpd_86(struct se_cmd *cmd, unsigned char *buf) +{ + if (cmd->data_length < 60) + return 0; + + buf[1] = 0x86; + buf[2] = 0x3c; + /* Set HEADSUP, ORDSUP, SIMPSUP */ + buf[5] = 0x07; + + /* If WriteCache emulation is enabled, set V_SUP */ + if (DEV_ATTRIB(SE_DEV(cmd))->emulate_write_cache > 0) + buf[6] = 0x01; + return 0; +} + +/* Block Limits VPD page */ +static int +target_emulate_evpd_b0(struct se_cmd *cmd, unsigned char *buf) +{ + struct se_device *dev = SE_DEV(cmd); + int have_tp = 0; + + /* + * Following sbc3r22 section 6.5.3 Block Limits VPD page, when + * emulate_tpu=1 or emulate_tpws=1 we will be expect a + * different page length for Thin Provisioning. + */ + if (DEV_ATTRIB(dev)->emulate_tpu || DEV_ATTRIB(dev)->emulate_tpws) + have_tp = 1; + + if (cmd->data_length < (0x10 + 4)) { + printk(KERN_INFO "Received data_length: %u" + " too small for EVPD 0xb0\n", + cmd->data_length); + return -1; + } + + if (have_tp && cmd->data_length < (0x3c + 4)) { + printk(KERN_INFO "Received data_length: %u" + " too small for TPE=1 EVPD 0xb0\n", + cmd->data_length); + have_tp = 0; + } + + buf[0] = dev->transport->get_device_type(dev); + buf[1] = 0xb0; + buf[3] = have_tp ? 0x3c : 0x10; + + /* + * Set OPTIMAL TRANSFER LENGTH GRANULARITY + */ + put_unaligned_be16(1, &buf[6]); + + /* + * Set MAXIMUM TRANSFER LENGTH + */ + put_unaligned_be32(DEV_ATTRIB(dev)->max_sectors, &buf[8]); + + /* + * Set OPTIMAL TRANSFER LENGTH + */ + put_unaligned_be32(DEV_ATTRIB(dev)->optimal_sectors, &buf[12]); + + /* + * Exit now if we don't support TP or the initiator sent a too + * short buffer. + */ + if (!have_tp || cmd->data_length < (0x3c + 4)) + return 0; + + /* + * Set MAXIMUM UNMAP LBA COUNT + */ + put_unaligned_be32(DEV_ATTRIB(dev)->max_unmap_lba_count, &buf[20]); + + /* + * Set MAXIMUM UNMAP BLOCK DESCRIPTOR COUNT + */ + put_unaligned_be32(DEV_ATTRIB(dev)->max_unmap_block_desc_count, + &buf[24]); + + /* + * Set OPTIMAL UNMAP GRANULARITY + */ + put_unaligned_be32(DEV_ATTRIB(dev)->unmap_granularity, &buf[28]); + + /* + * UNMAP GRANULARITY ALIGNMENT + */ + put_unaligned_be32(DEV_ATTRIB(dev)->unmap_granularity_alignment, + &buf[32]); + if (DEV_ATTRIB(dev)->unmap_granularity_alignment != 0) + buf[32] |= 0x80; /* Set the UGAVALID bit */ + + return 0; +} + +/* Thin Provisioning VPD */ +static int +target_emulate_evpd_b2(struct se_cmd *cmd, unsigned char *buf) +{ + struct se_device *dev = SE_DEV(cmd); + + /* + * From sbc3r22 section 6.5.4 Thin Provisioning VPD page: + * + * The PAGE LENGTH field is defined in SPC-4. If the DP bit is set to + * zero, then the page length shall be set to 0004h. If the DP bit + * is set to one, then the page length shall be set to the value + * defined in table 162. + */ + buf[0] = dev->transport->get_device_type(dev); + buf[1] = 0xb2; + + /* + * Set Hardcoded length mentioned above for DP=0 + */ + put_unaligned_be16(0x0004, &buf[2]); + + /* + * The THRESHOLD EXPONENT field indicates the threshold set size in + * LBAs as a power of 2 (i.e., the threshold set size is equal to + * 2(threshold exponent)). + * + * Note that this is currently set to 0x00 as mkp says it will be + * changing again. We can enable this once it has settled in T10 + * and is actually used by Linux/SCSI ML code. + */ + buf[4] = 0x00; + + /* + * A TPU bit set to one indicates that the device server supports + * the UNMAP command (see 5.25). A TPU bit set to zero indicates + * that the device server does not support the UNMAP command. + */ + if (DEV_ATTRIB(dev)->emulate_tpu != 0) + buf[5] = 0x80; + + /* + * A TPWS bit set to one indicates that the device server supports + * the use of the WRITE SAME (16) command (see 5.42) to unmap LBAs. + * A TPWS bit set to zero indicates that the device server does not + * support the use of the WRITE SAME (16) command to unmap LBAs. + */ + if (DEV_ATTRIB(dev)->emulate_tpws != 0) + buf[5] |= 0x40; + + return 0; +} + +static int +target_emulate_inquiry(struct se_cmd *cmd) +{ + struct se_device *dev = SE_DEV(cmd); + unsigned char *buf = cmd->t_task->t_task_buf; + unsigned char *cdb = cmd->t_task->t_task_cdb; + + if (!(cdb[1] & 0x1)) + return target_emulate_inquiry_std(cmd); + + /* + * Make sure we at least have 4 bytes of INQUIRY response + * payload for 0x00 going back for EVPD=1. Note that 0x80 + * and 0x83 will check for enough payload data length and + * jump to set_len: label when there is not enough inquiry EVPD + * payload length left for the next outgoing EVPD metadata + */ + if (cmd->data_length < 4) { + printk(KERN_ERR "SCSI Inquiry payload length: %u" + " too small for EVPD=1\n", cmd->data_length); + return -1; + } + buf[0] = dev->transport->get_device_type(dev); + + switch (cdb[2]) { + case 0x00: + return target_emulate_evpd_00(cmd, buf); + case 0x80: + return target_emulate_evpd_80(cmd, buf); + case 0x83: + return target_emulate_evpd_83(cmd, buf); + case 0x86: + return target_emulate_evpd_86(cmd, buf); + case 0xb0: + return target_emulate_evpd_b0(cmd, buf); + case 0xb2: + return target_emulate_evpd_b2(cmd, buf); + default: + printk(KERN_ERR "Unknown VPD Code: 0x%02x\n", cdb[2]); + return -1; + } + + return 0; +} + +static int +target_emulate_readcapacity(struct se_cmd *cmd) +{ + struct se_device *dev = SE_DEV(cmd); + unsigned char *buf = cmd->t_task->t_task_buf; + u32 blocks = dev->transport->get_blocks(dev); + + buf[0] = (blocks >> 24) & 0xff; + buf[1] = (blocks >> 16) & 0xff; + buf[2] = (blocks >> 8) & 0xff; + buf[3] = blocks & 0xff; + buf[4] = (DEV_ATTRIB(dev)->block_size >> 24) & 0xff; + buf[5] = (DEV_ATTRIB(dev)->block_size >> 16) & 0xff; + buf[6] = (DEV_ATTRIB(dev)->block_size >> 8) & 0xff; + buf[7] = DEV_ATTRIB(dev)->block_size & 0xff; + /* + * Set max 32-bit blocks to signal SERVICE ACTION READ_CAPACITY_16 + */ + if (DEV_ATTRIB(dev)->emulate_tpu || DEV_ATTRIB(dev)->emulate_tpws) + put_unaligned_be32(0xFFFFFFFF, &buf[0]); + + return 0; +} + +static int +target_emulate_readcapacity_16(struct se_cmd *cmd) +{ + struct se_device *dev = SE_DEV(cmd); + unsigned char *buf = cmd->t_task->t_task_buf; + unsigned long long blocks = dev->transport->get_blocks(dev); + + buf[0] = (blocks >> 56) & 0xff; + buf[1] = (blocks >> 48) & 0xff; + buf[2] = (blocks >> 40) & 0xff; + buf[3] = (blocks >> 32) & 0xff; + buf[4] = (blocks >> 24) & 0xff; + buf[5] = (blocks >> 16) & 0xff; + buf[6] = (blocks >> 8) & 0xff; + buf[7] = blocks & 0xff; + buf[8] = (DEV_ATTRIB(dev)->block_size >> 24) & 0xff; + buf[9] = (DEV_ATTRIB(dev)->block_size >> 16) & 0xff; + buf[10] = (DEV_ATTRIB(dev)->block_size >> 8) & 0xff; + buf[11] = DEV_ATTRIB(dev)->block_size & 0xff; + /* + * Set Thin Provisioning Enable bit following sbc3r22 in section + * READ CAPACITY (16) byte 14 if emulate_tpu or emulate_tpws is enabled. + */ + if (DEV_ATTRIB(dev)->emulate_tpu || DEV_ATTRIB(dev)->emulate_tpws) + buf[14] = 0x80; + + return 0; +} + +static int +target_modesense_rwrecovery(unsigned char *p) +{ + p[0] = 0x01; + p[1] = 0x0a; + + return 12; +} + +static int +target_modesense_control(struct se_device *dev, unsigned char *p) +{ + p[0] = 0x0a; + p[1] = 0x0a; + p[2] = 2; + /* + * From spc4r17, section 7.4.6 Control mode Page + * + * Unit Attention interlocks control (UN_INTLCK_CTRL) to code 00b + * + * 00b: The logical unit shall clear any unit attention condition + * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION + * status and shall not establish a unit attention condition when a com- + * mand is completed with BUSY, TASK SET FULL, or RESERVATION CONFLICT + * status. + * + * 10b: The logical unit shall not clear any unit attention condition + * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION + * status and shall not establish a unit attention condition when + * a command is completed with BUSY, TASK SET FULL, or RESERVATION + * CONFLICT status. + * + * 11b a The logical unit shall not clear any unit attention condition + * reported in the same I_T_L_Q nexus transaction as a CHECK CONDITION + * status and shall establish a unit attention condition for the + * initiator port associated with the I_T nexus on which the BUSY, + * TASK SET FULL, or RESERVATION CONFLICT status is being returned. + * Depending on the status, the additional sense code shall be set to + * PREVIOUS BUSY STATUS, PREVIOUS TASK SET FULL STATUS, or PREVIOUS + * RESERVATION CONFLICT STATUS. Until it is cleared by a REQUEST SENSE + * command, a unit attention condition shall be established only once + * for a BUSY, TASK SET FULL, or RESERVATION CONFLICT status regardless + * to the number of commands completed with one of those status codes. + */ + p[4] = (DEV_ATTRIB(dev)->emulate_ua_intlck_ctrl == 2) ? 0x30 : + (DEV_ATTRIB(dev)->emulate_ua_intlck_ctrl == 1) ? 0x20 : 0x00; + /* + * From spc4r17, section 7.4.6 Control mode Page + * + * Task Aborted Status (TAS) bit set to zero. + * + * A task aborted status (TAS) bit set to zero specifies that aborted + * tasks shall be terminated by the device server without any response + * to the application client. A TAS bit set to one specifies that tasks + * aborted by the actions of an I_T nexus other than the I_T nexus on + * which the command was received shall be completed with TASK ABORTED + * status (see SAM-4). + */ + p[5] = (DEV_ATTRIB(dev)->emulate_tas) ? 0x40 : 0x00; + p[8] = 0xff; + p[9] = 0xff; + p[11] = 30; + + return 12; +} + +static int +target_modesense_caching(struct se_device *dev, unsigned char *p) +{ + p[0] = 0x08; + p[1] = 0x12; + if (DEV_ATTRIB(dev)->emulate_write_cache > 0) + p[2] = 0x04; /* Write Cache Enable */ + p[12] = 0x20; /* Disabled Read Ahead */ + + return 20; +} + +static void +target_modesense_write_protect(unsigned char *buf, int type) +{ + /* + * I believe that the WP bit (bit 7) in the mode header is the same for + * all device types.. + */ + switch (type) { + case TYPE_DISK: + case TYPE_TAPE: + default: + buf[0] |= 0x80; /* WP bit */ + break; + } +} + +static void +target_modesense_dpofua(unsigned char *buf, int type) +{ + switch (type) { + case TYPE_DISK: + buf[0] |= 0x10; /* DPOFUA bit */ + break; + default: + break; + } +} + +static int +target_emulate_modesense(struct se_cmd *cmd, int ten) +{ + struct se_device *dev = SE_DEV(cmd); + char *cdb = cmd->t_task->t_task_cdb; + unsigned char *rbuf = cmd->t_task->t_task_buf; + int type = dev->transport->get_device_type(dev); + int offset = (ten) ? 8 : 4; + int length = 0; + unsigned char buf[SE_MODE_PAGE_BUF]; + + memset(buf, 0, SE_MODE_PAGE_BUF); + + switch (cdb[2] & 0x3f) { + case 0x01: + length = target_modesense_rwrecovery(&buf[offset]); + break; + case 0x08: + length = target_modesense_caching(dev, &buf[offset]); + break; + case 0x0a: + length = target_modesense_control(dev, &buf[offset]); + break; + case 0x3f: + length = target_modesense_rwrecovery(&buf[offset]); + length += target_modesense_caching(dev, &buf[offset+length]); + length += target_modesense_control(dev, &buf[offset+length]); + break; + default: + printk(KERN_ERR "Got Unknown Mode Page: 0x%02x\n", + cdb[2] & 0x3f); + return PYX_TRANSPORT_UNKNOWN_MODE_PAGE; + } + offset += length; + + if (ten) { + offset -= 2; + buf[0] = (offset >> 8) & 0xff; + buf[1] = offset & 0xff; + + if ((SE_LUN(cmd)->lun_access & TRANSPORT_LUNFLAGS_READ_ONLY) || + (cmd->se_deve && + (cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY))) + target_modesense_write_protect(&buf[3], type); + + if ((DEV_ATTRIB(dev)->emulate_write_cache > 0) && + (DEV_ATTRIB(dev)->emulate_fua_write > 0)) + target_modesense_dpofua(&buf[3], type); + + if ((offset + 2) > cmd->data_length) + offset = cmd->data_length; + + } else { + offset -= 1; + buf[0] = offset & 0xff; + + if ((SE_LUN(cmd)->lun_access & TRANSPORT_LUNFLAGS_READ_ONLY) || + (cmd->se_deve && + (cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY))) + target_modesense_write_protect(&buf[2], type); + + if ((DEV_ATTRIB(dev)->emulate_write_cache > 0) && + (DEV_ATTRIB(dev)->emulate_fua_write > 0)) + target_modesense_dpofua(&buf[2], type); + + if ((offset + 1) > cmd->data_length) + offset = cmd->data_length; + } + memcpy(rbuf, buf, offset); + + return 0; +} + +static int +target_emulate_request_sense(struct se_cmd *cmd) +{ + unsigned char *cdb = cmd->t_task->t_task_cdb; + unsigned char *buf = cmd->t_task->t_task_buf; + u8 ua_asc = 0, ua_ascq = 0; + + if (cdb[1] & 0x01) { + printk(KERN_ERR "REQUEST_SENSE description emulation not" + " supported\n"); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + if (!(core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq))) { + /* + * CURRENT ERROR, UNIT ATTENTION + */ + buf[0] = 0x70; + buf[SPC_SENSE_KEY_OFFSET] = UNIT_ATTENTION; + /* + * Make sure request data length is enough for additional + * sense data. + */ + if (cmd->data_length <= 18) { + buf[7] = 0x00; + return 0; + } + /* + * The Additional Sense Code (ASC) from the UNIT ATTENTION + */ + buf[SPC_ASC_KEY_OFFSET] = ua_asc; + buf[SPC_ASCQ_KEY_OFFSET] = ua_ascq; + buf[7] = 0x0A; + } else { + /* + * CURRENT ERROR, NO SENSE + */ + buf[0] = 0x70; + buf[SPC_SENSE_KEY_OFFSET] = NO_SENSE; + /* + * Make sure request data length is enough for additional + * sense data. + */ + if (cmd->data_length <= 18) { + buf[7] = 0x00; + return 0; + } + /* + * NO ADDITIONAL SENSE INFORMATION + */ + buf[SPC_ASC_KEY_OFFSET] = 0x00; + buf[7] = 0x0A; + } + + return 0; +} + +/* + * Used for TCM/IBLOCK and TCM/FILEIO for block/blk-lib.c level discard support. + * Note this is not used for TCM/pSCSI passthrough + */ +static int +target_emulate_unmap(struct se_task *task) +{ + struct se_cmd *cmd = TASK_CMD(task); + struct se_device *dev = SE_DEV(cmd); + unsigned char *buf = cmd->t_task->t_task_buf, *ptr = NULL; + unsigned char *cdb = &cmd->t_task->t_task_cdb[0]; + sector_t lba; + unsigned int size = cmd->data_length, range; + int ret, offset; + unsigned short dl, bd_dl; + + /* First UNMAP block descriptor starts at 8 byte offset */ + offset = 8; + size -= 8; + dl = get_unaligned_be16(&cdb[0]); + bd_dl = get_unaligned_be16(&cdb[2]); + ptr = &buf[offset]; + printk(KERN_INFO "UNMAP: Sub: %s Using dl: %hu bd_dl: %hu size: %hu" + " ptr: %p\n", dev->transport->name, dl, bd_dl, size, ptr); + + while (size) { + lba = get_unaligned_be64(&ptr[0]); + range = get_unaligned_be32(&ptr[8]); + printk(KERN_INFO "UNMAP: Using lba: %llu and range: %u\n", + (unsigned long long)lba, range); + + ret = dev->transport->do_discard(dev, lba, range); + if (ret < 0) { + printk(KERN_ERR "blkdev_issue_discard() failed: %d\n", + ret); + return -1; + } + + ptr += 16; + size -= 16; + } + + task->task_scsi_status = GOOD; + transport_complete_task(task, 1); + return 0; +} + +/* + * Used for TCM/IBLOCK and TCM/FILEIO for block/blk-lib.c level discard support. + * Note this is not used for TCM/pSCSI passthrough + */ +static int +target_emulate_write_same(struct se_task *task) +{ + struct se_cmd *cmd = TASK_CMD(task); + struct se_device *dev = SE_DEV(cmd); + sector_t lba = cmd->t_task->t_task_lba; + unsigned int range; + int ret; + + range = (cmd->data_length / DEV_ATTRIB(dev)->block_size); + + printk(KERN_INFO "WRITE_SAME UNMAP: LBA: %llu Range: %u\n", + (unsigned long long)lba, range); + + ret = dev->transport->do_discard(dev, lba, range); + if (ret < 0) { + printk(KERN_INFO "blkdev_issue_discard() failed for WRITE_SAME\n"); + return -1; + } + + task->task_scsi_status = GOOD; + transport_complete_task(task, 1); + return 0; +} + +int +transport_emulate_control_cdb(struct se_task *task) +{ + struct se_cmd *cmd = TASK_CMD(task); + struct se_device *dev = SE_DEV(cmd); + unsigned short service_action; + int ret = 0; + + switch (cmd->t_task->t_task_cdb[0]) { + case INQUIRY: + ret = target_emulate_inquiry(cmd); + break; + case READ_CAPACITY: + ret = target_emulate_readcapacity(cmd); + break; + case MODE_SENSE: + ret = target_emulate_modesense(cmd, 0); + break; + case MODE_SENSE_10: + ret = target_emulate_modesense(cmd, 1); + break; + case SERVICE_ACTION_IN: + switch (cmd->t_task->t_task_cdb[1] & 0x1f) { + case SAI_READ_CAPACITY_16: + ret = target_emulate_readcapacity_16(cmd); + break; + default: + printk(KERN_ERR "Unsupported SA: 0x%02x\n", + cmd->t_task->t_task_cdb[1] & 0x1f); + return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + } + break; + case REQUEST_SENSE: + ret = target_emulate_request_sense(cmd); + break; + case UNMAP: + if (!dev->transport->do_discard) { + printk(KERN_ERR "UNMAP emulation not supported for: %s\n", + dev->transport->name); + return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + } + ret = target_emulate_unmap(task); + break; + case WRITE_SAME_16: + if (!dev->transport->do_discard) { + printk(KERN_ERR "WRITE_SAME_16 emulation not supported" + " for: %s\n", dev->transport->name); + return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + } + ret = target_emulate_write_same(task); + break; + case VARIABLE_LENGTH_CMD: + service_action = + get_unaligned_be16(&cmd->t_task->t_task_cdb[8]); + switch (service_action) { + case WRITE_SAME_32: + if (!dev->transport->do_discard) { + printk(KERN_ERR "WRITE_SAME_32 SA emulation not" + " supported for: %s\n", + dev->transport->name); + return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + } + ret = target_emulate_write_same(task); + break; + default: + printk(KERN_ERR "Unsupported VARIABLE_LENGTH_CMD SA:" + " 0x%02x\n", service_action); + break; + } + break; + case SYNCHRONIZE_CACHE: + case 0x91: /* SYNCHRONIZE_CACHE_16: */ + if (!dev->transport->do_sync_cache) { + printk(KERN_ERR + "SYNCHRONIZE_CACHE emulation not supported" + " for: %s\n", dev->transport->name); + return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + } + dev->transport->do_sync_cache(task); + break; + case ALLOW_MEDIUM_REMOVAL: + case ERASE: + case REZERO_UNIT: + case SEEK_10: + case SPACE: + case START_STOP: + case TEST_UNIT_READY: + case VERIFY: + case WRITE_FILEMARKS: + break; + default: + printk(KERN_ERR "Unsupported SCSI Opcode: 0x%02x for %s\n", + cmd->t_task->t_task_cdb[0], dev->transport->name); + return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + } + + if (ret < 0) + return ret; + task->task_scsi_status = GOOD; + transport_complete_task(task, 1); + + return PYX_TRANSPORT_SENT_TO_TRANSPORT; +} diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c new file mode 100644 index 000000000000..2764510798b0 --- /dev/null +++ b/drivers/target/target_core_configfs.c @@ -0,0 +1,3225 @@ +/******************************************************************************* + * Filename: target_core_configfs.c + * + * This file contains ConfigFS logic for the Generic Target Engine project. + * + * Copyright (c) 2008-2010 Rising Tide Systems + * Copyright (c) 2008-2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * based on configfs Copyright (C) 2005 Oracle. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + ****************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "target_core_alua.h" +#include "target_core_hba.h" +#include "target_core_pr.h" +#include "target_core_rd.h" + +static struct list_head g_tf_list; +static struct mutex g_tf_lock; + +struct target_core_configfs_attribute { + struct configfs_attribute attr; + ssize_t (*show)(void *, char *); + ssize_t (*store)(void *, const char *, size_t); +}; + +static inline struct se_hba * +item_to_hba(struct config_item *item) +{ + return container_of(to_config_group(item), struct se_hba, hba_group); +} + +/* + * Attributes for /sys/kernel/config/target/ + */ +static ssize_t target_core_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + return sprintf(page, "Target Engine Core ConfigFS Infrastructure %s" + " on %s/%s on "UTS_RELEASE"\n", TARGET_CORE_CONFIGFS_VERSION, + utsname()->sysname, utsname()->machine); +} + +static struct configfs_item_operations target_core_fabric_item_ops = { + .show_attribute = target_core_attr_show, +}; + +static struct configfs_attribute target_core_item_attr_version = { + .ca_owner = THIS_MODULE, + .ca_name = "version", + .ca_mode = S_IRUGO, +}; + +static struct target_fabric_configfs *target_core_get_fabric( + const char *name) +{ + struct target_fabric_configfs *tf; + + if (!(name)) + return NULL; + + mutex_lock(&g_tf_lock); + list_for_each_entry(tf, &g_tf_list, tf_list) { + if (!(strcmp(tf->tf_name, name))) { + atomic_inc(&tf->tf_access_cnt); + mutex_unlock(&g_tf_lock); + return tf; + } + } + mutex_unlock(&g_tf_lock); + + return NULL; +} + +/* + * Called from struct target_core_group_ops->make_group() + */ +static struct config_group *target_core_register_fabric( + struct config_group *group, + const char *name) +{ + struct target_fabric_configfs *tf; + int ret; + + printk(KERN_INFO "Target_Core_ConfigFS: REGISTER -> group: %p name:" + " %s\n", group, name); + /* + * Ensure that TCM subsystem plugins are loaded at this point for + * using the RAMDISK_DR virtual LUN 0 and all other struct se_port + * LUN symlinks. + */ + if (transport_subsystem_check_init() < 0) + return ERR_PTR(-EINVAL); + + /* + * Below are some hardcoded request_module() calls to automatically + * local fabric modules when the following is called: + * + * mkdir -p /sys/kernel/config/target/$MODULE_NAME + * + * Note that this does not limit which TCM fabric module can be + * registered, but simply provids auto loading logic for modules with + * mkdir(2) system calls with known TCM fabric modules. + */ + if (!(strncmp(name, "iscsi", 5))) { + /* + * Automatically load the LIO Target fabric module when the + * following is called: + * + * mkdir -p $CONFIGFS/target/iscsi + */ + ret = request_module("iscsi_target_mod"); + if (ret < 0) { + printk(KERN_ERR "request_module() failed for" + " iscsi_target_mod.ko: %d\n", ret); + return ERR_PTR(-EINVAL); + } + } else if (!(strncmp(name, "loopback", 8))) { + /* + * Automatically load the tcm_loop fabric module when the + * following is called: + * + * mkdir -p $CONFIGFS/target/loopback + */ + ret = request_module("tcm_loop"); + if (ret < 0) { + printk(KERN_ERR "request_module() failed for" + " tcm_loop.ko: %d\n", ret); + return ERR_PTR(-EINVAL); + } + } + + tf = target_core_get_fabric(name); + if (!(tf)) { + printk(KERN_ERR "target_core_get_fabric() failed for %s\n", + name); + return ERR_PTR(-EINVAL); + } + printk(KERN_INFO "Target_Core_ConfigFS: REGISTER -> Located fabric:" + " %s\n", tf->tf_name); + /* + * On a successful target_core_get_fabric() look, the returned + * struct target_fabric_configfs *tf will contain a usage reference. + */ + printk(KERN_INFO "Target_Core_ConfigFS: REGISTER tfc_wwn_cit -> %p\n", + &TF_CIT_TMPL(tf)->tfc_wwn_cit); + + tf->tf_group.default_groups = tf->tf_default_groups; + tf->tf_group.default_groups[0] = &tf->tf_disc_group; + tf->tf_group.default_groups[1] = NULL; + + config_group_init_type_name(&tf->tf_group, name, + &TF_CIT_TMPL(tf)->tfc_wwn_cit); + config_group_init_type_name(&tf->tf_disc_group, "discovery_auth", + &TF_CIT_TMPL(tf)->tfc_discovery_cit); + + printk(KERN_INFO "Target_Core_ConfigFS: REGISTER -> Allocated Fabric:" + " %s\n", tf->tf_group.cg_item.ci_name); + /* + * Setup tf_ops.tf_subsys pointer for usage with configfs_depend_item() + */ + tf->tf_ops.tf_subsys = tf->tf_subsys; + tf->tf_fabric = &tf->tf_group.cg_item; + printk(KERN_INFO "Target_Core_ConfigFS: REGISTER -> Set tf->tf_fabric" + " for %s\n", name); + + return &tf->tf_group; +} + +/* + * Called from struct target_core_group_ops->drop_item() + */ +static void target_core_deregister_fabric( + struct config_group *group, + struct config_item *item) +{ + struct target_fabric_configfs *tf = container_of( + to_config_group(item), struct target_fabric_configfs, tf_group); + struct config_group *tf_group; + struct config_item *df_item; + int i; + + printk(KERN_INFO "Target_Core_ConfigFS: DEREGISTER -> Looking up %s in" + " tf list\n", config_item_name(item)); + + printk(KERN_INFO "Target_Core_ConfigFS: DEREGISTER -> located fabric:" + " %s\n", tf->tf_name); + atomic_dec(&tf->tf_access_cnt); + + printk(KERN_INFO "Target_Core_ConfigFS: DEREGISTER -> Releasing" + " tf->tf_fabric for %s\n", tf->tf_name); + tf->tf_fabric = NULL; + + printk(KERN_INFO "Target_Core_ConfigFS: DEREGISTER -> Releasing ci" + " %s\n", config_item_name(item)); + + tf_group = &tf->tf_group; + for (i = 0; tf_group->default_groups[i]; i++) { + df_item = &tf_group->default_groups[i]->cg_item; + tf_group->default_groups[i] = NULL; + config_item_put(df_item); + } + config_item_put(item); +} + +static struct configfs_group_operations target_core_fabric_group_ops = { + .make_group = &target_core_register_fabric, + .drop_item = &target_core_deregister_fabric, +}; + +/* + * All item attributes appearing in /sys/kernel/target/ appear here. + */ +static struct configfs_attribute *target_core_fabric_item_attrs[] = { + &target_core_item_attr_version, + NULL, +}; + +/* + * Provides Fabrics Groups and Item Attributes for /sys/kernel/config/target/ + */ +static struct config_item_type target_core_fabrics_item = { + .ct_item_ops = &target_core_fabric_item_ops, + .ct_group_ops = &target_core_fabric_group_ops, + .ct_attrs = target_core_fabric_item_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct configfs_subsystem target_core_fabrics = { + .su_group = { + .cg_item = { + .ci_namebuf = "target", + .ci_type = &target_core_fabrics_item, + }, + }, +}; + +static struct configfs_subsystem *target_core_subsystem[] = { + &target_core_fabrics, + NULL, +}; + +/*############################################################################## +// Start functions called by external Target Fabrics Modules +//############################################################################*/ + +/* + * First function called by fabric modules to: + * + * 1) Allocate a struct target_fabric_configfs and save the *fabric_cit pointer. + * 2) Add struct target_fabric_configfs to g_tf_list + * 3) Return struct target_fabric_configfs to fabric module to be passed + * into target_fabric_configfs_register(). + */ +struct target_fabric_configfs *target_fabric_configfs_init( + struct module *fabric_mod, + const char *name) +{ + struct target_fabric_configfs *tf; + + if (!(fabric_mod)) { + printk(KERN_ERR "Missing struct module *fabric_mod pointer\n"); + return NULL; + } + if (!(name)) { + printk(KERN_ERR "Unable to locate passed fabric name\n"); + return NULL; + } + if (strlen(name) > TARGET_FABRIC_NAME_SIZE) { + printk(KERN_ERR "Passed name: %s exceeds TARGET_FABRIC" + "_NAME_SIZE\n", name); + return NULL; + } + + tf = kzalloc(sizeof(struct target_fabric_configfs), GFP_KERNEL); + if (!(tf)) + return ERR_PTR(-ENOMEM); + + INIT_LIST_HEAD(&tf->tf_list); + atomic_set(&tf->tf_access_cnt, 0); + /* + * Setup the default generic struct config_item_type's (cits) in + * struct target_fabric_configfs->tf_cit_tmpl + */ + tf->tf_module = fabric_mod; + target_fabric_setup_cits(tf); + + tf->tf_subsys = target_core_subsystem[0]; + snprintf(tf->tf_name, TARGET_FABRIC_NAME_SIZE, "%s", name); + + mutex_lock(&g_tf_lock); + list_add_tail(&tf->tf_list, &g_tf_list); + mutex_unlock(&g_tf_lock); + + printk(KERN_INFO "<<<<<<<<<<<<<<<<<<<<<< BEGIN FABRIC API >>>>>>>>" + ">>>>>>>>>>>>>>\n"); + printk(KERN_INFO "Initialized struct target_fabric_configfs: %p for" + " %s\n", tf, tf->tf_name); + return tf; +} +EXPORT_SYMBOL(target_fabric_configfs_init); + +/* + * Called by fabric plugins after FAILED target_fabric_configfs_register() call. + */ +void target_fabric_configfs_free( + struct target_fabric_configfs *tf) +{ + mutex_lock(&g_tf_lock); + list_del(&tf->tf_list); + mutex_unlock(&g_tf_lock); + + kfree(tf); +} +EXPORT_SYMBOL(target_fabric_configfs_free); + +/* + * Perform a sanity check of the passed tf->tf_ops before completing + * TCM fabric module registration. + */ +static int target_fabric_tf_ops_check( + struct target_fabric_configfs *tf) +{ + struct target_core_fabric_ops *tfo = &tf->tf_ops; + + if (!(tfo->get_fabric_name)) { + printk(KERN_ERR "Missing tfo->get_fabric_name()\n"); + return -EINVAL; + } + if (!(tfo->get_fabric_proto_ident)) { + printk(KERN_ERR "Missing tfo->get_fabric_proto_ident()\n"); + return -EINVAL; + } + if (!(tfo->tpg_get_wwn)) { + printk(KERN_ERR "Missing tfo->tpg_get_wwn()\n"); + return -EINVAL; + } + if (!(tfo->tpg_get_tag)) { + printk(KERN_ERR "Missing tfo->tpg_get_tag()\n"); + return -EINVAL; + } + if (!(tfo->tpg_get_default_depth)) { + printk(KERN_ERR "Missing tfo->tpg_get_default_depth()\n"); + return -EINVAL; + } + if (!(tfo->tpg_get_pr_transport_id)) { + printk(KERN_ERR "Missing tfo->tpg_get_pr_transport_id()\n"); + return -EINVAL; + } + if (!(tfo->tpg_get_pr_transport_id_len)) { + printk(KERN_ERR "Missing tfo->tpg_get_pr_transport_id_len()\n"); + return -EINVAL; + } + if (!(tfo->tpg_check_demo_mode)) { + printk(KERN_ERR "Missing tfo->tpg_check_demo_mode()\n"); + return -EINVAL; + } + if (!(tfo->tpg_check_demo_mode_cache)) { + printk(KERN_ERR "Missing tfo->tpg_check_demo_mode_cache()\n"); + return -EINVAL; + } + if (!(tfo->tpg_check_demo_mode_write_protect)) { + printk(KERN_ERR "Missing tfo->tpg_check_demo_mode_write_protect()\n"); + return -EINVAL; + } + if (!(tfo->tpg_check_prod_mode_write_protect)) { + printk(KERN_ERR "Missing tfo->tpg_check_prod_mode_write_protect()\n"); + return -EINVAL; + } + if (!(tfo->tpg_alloc_fabric_acl)) { + printk(KERN_ERR "Missing tfo->tpg_alloc_fabric_acl()\n"); + return -EINVAL; + } + if (!(tfo->tpg_release_fabric_acl)) { + printk(KERN_ERR "Missing tfo->tpg_release_fabric_acl()\n"); + return -EINVAL; + } + if (!(tfo->tpg_get_inst_index)) { + printk(KERN_ERR "Missing tfo->tpg_get_inst_index()\n"); + return -EINVAL; + } + if (!(tfo->release_cmd_to_pool)) { + printk(KERN_ERR "Missing tfo->release_cmd_to_pool()\n"); + return -EINVAL; + } + if (!(tfo->release_cmd_direct)) { + printk(KERN_ERR "Missing tfo->release_cmd_direct()\n"); + return -EINVAL; + } + if (!(tfo->shutdown_session)) { + printk(KERN_ERR "Missing tfo->shutdown_session()\n"); + return -EINVAL; + } + if (!(tfo->close_session)) { + printk(KERN_ERR "Missing tfo->close_session()\n"); + return -EINVAL; + } + if (!(tfo->stop_session)) { + printk(KERN_ERR "Missing tfo->stop_session()\n"); + return -EINVAL; + } + if (!(tfo->fall_back_to_erl0)) { + printk(KERN_ERR "Missing tfo->fall_back_to_erl0()\n"); + return -EINVAL; + } + if (!(tfo->sess_logged_in)) { + printk(KERN_ERR "Missing tfo->sess_logged_in()\n"); + return -EINVAL; + } + if (!(tfo->sess_get_index)) { + printk(KERN_ERR "Missing tfo->sess_get_index()\n"); + return -EINVAL; + } + if (!(tfo->write_pending)) { + printk(KERN_ERR "Missing tfo->write_pending()\n"); + return -EINVAL; + } + if (!(tfo->write_pending_status)) { + printk(KERN_ERR "Missing tfo->write_pending_status()\n"); + return -EINVAL; + } + if (!(tfo->set_default_node_attributes)) { + printk(KERN_ERR "Missing tfo->set_default_node_attributes()\n"); + return -EINVAL; + } + if (!(tfo->get_task_tag)) { + printk(KERN_ERR "Missing tfo->get_task_tag()\n"); + return -EINVAL; + } + if (!(tfo->get_cmd_state)) { + printk(KERN_ERR "Missing tfo->get_cmd_state()\n"); + return -EINVAL; + } + if (!(tfo->new_cmd_failure)) { + printk(KERN_ERR "Missing tfo->new_cmd_failure()\n"); + return -EINVAL; + } + if (!(tfo->queue_data_in)) { + printk(KERN_ERR "Missing tfo->queue_data_in()\n"); + return -EINVAL; + } + if (!(tfo->queue_status)) { + printk(KERN_ERR "Missing tfo->queue_status()\n"); + return -EINVAL; + } + if (!(tfo->queue_tm_rsp)) { + printk(KERN_ERR "Missing tfo->queue_tm_rsp()\n"); + return -EINVAL; + } + if (!(tfo->set_fabric_sense_len)) { + printk(KERN_ERR "Missing tfo->set_fabric_sense_len()\n"); + return -EINVAL; + } + if (!(tfo->get_fabric_sense_len)) { + printk(KERN_ERR "Missing tfo->get_fabric_sense_len()\n"); + return -EINVAL; + } + if (!(tfo->is_state_remove)) { + printk(KERN_ERR "Missing tfo->is_state_remove()\n"); + return -EINVAL; + } + if (!(tfo->pack_lun)) { + printk(KERN_ERR "Missing tfo->pack_lun()\n"); + return -EINVAL; + } + /* + * We at least require tfo->fabric_make_wwn(), tfo->fabric_drop_wwn() + * tfo->fabric_make_tpg() and tfo->fabric_drop_tpg() in + * target_core_fabric_configfs.c WWN+TPG group context code. + */ + if (!(tfo->fabric_make_wwn)) { + printk(KERN_ERR "Missing tfo->fabric_make_wwn()\n"); + return -EINVAL; + } + if (!(tfo->fabric_drop_wwn)) { + printk(KERN_ERR "Missing tfo->fabric_drop_wwn()\n"); + return -EINVAL; + } + if (!(tfo->fabric_make_tpg)) { + printk(KERN_ERR "Missing tfo->fabric_make_tpg()\n"); + return -EINVAL; + } + if (!(tfo->fabric_drop_tpg)) { + printk(KERN_ERR "Missing tfo->fabric_drop_tpg()\n"); + return -EINVAL; + } + + return 0; +} + +/* + * Called 2nd from fabric module with returned parameter of + * struct target_fabric_configfs * from target_fabric_configfs_init(). + * + * Upon a successful registration, the new fabric's struct config_item is + * return. Also, a pointer to this struct is set in the passed + * struct target_fabric_configfs. + */ +int target_fabric_configfs_register( + struct target_fabric_configfs *tf) +{ + struct config_group *su_group; + int ret; + + if (!(tf)) { + printk(KERN_ERR "Unable to locate target_fabric_configfs" + " pointer\n"); + return -EINVAL; + } + if (!(tf->tf_subsys)) { + printk(KERN_ERR "Unable to target struct config_subsystem" + " pointer\n"); + return -EINVAL; + } + su_group = &tf->tf_subsys->su_group; + if (!(su_group)) { + printk(KERN_ERR "Unable to locate target struct config_group" + " pointer\n"); + return -EINVAL; + } + ret = target_fabric_tf_ops_check(tf); + if (ret < 0) + return ret; + + printk(KERN_INFO "<<<<<<<<<<<<<<<<<<<<<< END FABRIC API >>>>>>>>>>>>" + ">>>>>>>>>>\n"); + return 0; +} +EXPORT_SYMBOL(target_fabric_configfs_register); + +void target_fabric_configfs_deregister( + struct target_fabric_configfs *tf) +{ + struct config_group *su_group; + struct configfs_subsystem *su; + + if (!(tf)) { + printk(KERN_ERR "Unable to locate passed target_fabric_" + "configfs\n"); + return; + } + su = tf->tf_subsys; + if (!(su)) { + printk(KERN_ERR "Unable to locate passed tf->tf_subsys" + " pointer\n"); + return; + } + su_group = &tf->tf_subsys->su_group; + if (!(su_group)) { + printk(KERN_ERR "Unable to locate target struct config_group" + " pointer\n"); + return; + } + + printk(KERN_INFO "<<<<<<<<<<<<<<<<<<<<<< BEGIN FABRIC API >>>>>>>>>>" + ">>>>>>>>>>>>\n"); + mutex_lock(&g_tf_lock); + if (atomic_read(&tf->tf_access_cnt)) { + mutex_unlock(&g_tf_lock); + printk(KERN_ERR "Non zero tf->tf_access_cnt for fabric %s\n", + tf->tf_name); + BUG(); + } + list_del(&tf->tf_list); + mutex_unlock(&g_tf_lock); + + printk(KERN_INFO "Target_Core_ConfigFS: DEREGISTER -> Releasing tf:" + " %s\n", tf->tf_name); + tf->tf_module = NULL; + tf->tf_subsys = NULL; + kfree(tf); + + printk("<<<<<<<<<<<<<<<<<<<<<< END FABRIC API >>>>>>>>>>>>>>>>>" + ">>>>>\n"); + return; +} +EXPORT_SYMBOL(target_fabric_configfs_deregister); + +/*############################################################################## +// Stop functions called by external Target Fabrics Modules +//############################################################################*/ + +/* Start functions for struct config_item_type target_core_dev_attrib_cit */ + +#define DEF_DEV_ATTRIB_SHOW(_name) \ +static ssize_t target_core_dev_show_attr_##_name( \ + struct se_dev_attrib *da, \ + char *page) \ +{ \ + struct se_device *dev; \ + struct se_subsystem_dev *se_dev = da->da_sub_dev; \ + ssize_t rb; \ + \ + spin_lock(&se_dev->se_dev_lock); \ + dev = se_dev->se_dev_ptr; \ + if (!(dev)) { \ + spin_unlock(&se_dev->se_dev_lock); \ + return -ENODEV; \ + } \ + rb = snprintf(page, PAGE_SIZE, "%u\n", (u32)DEV_ATTRIB(dev)->_name); \ + spin_unlock(&se_dev->se_dev_lock); \ + \ + return rb; \ +} + +#define DEF_DEV_ATTRIB_STORE(_name) \ +static ssize_t target_core_dev_store_attr_##_name( \ + struct se_dev_attrib *da, \ + const char *page, \ + size_t count) \ +{ \ + struct se_device *dev; \ + struct se_subsystem_dev *se_dev = da->da_sub_dev; \ + unsigned long val; \ + int ret; \ + \ + spin_lock(&se_dev->se_dev_lock); \ + dev = se_dev->se_dev_ptr; \ + if (!(dev)) { \ + spin_unlock(&se_dev->se_dev_lock); \ + return -ENODEV; \ + } \ + ret = strict_strtoul(page, 0, &val); \ + if (ret < 0) { \ + spin_unlock(&se_dev->se_dev_lock); \ + printk(KERN_ERR "strict_strtoul() failed with" \ + " ret: %d\n", ret); \ + return -EINVAL; \ + } \ + ret = se_dev_set_##_name(dev, (u32)val); \ + spin_unlock(&se_dev->se_dev_lock); \ + \ + return (!ret) ? count : -EINVAL; \ +} + +#define DEF_DEV_ATTRIB(_name) \ +DEF_DEV_ATTRIB_SHOW(_name); \ +DEF_DEV_ATTRIB_STORE(_name); + +#define DEF_DEV_ATTRIB_RO(_name) \ +DEF_DEV_ATTRIB_SHOW(_name); + +CONFIGFS_EATTR_STRUCT(target_core_dev_attrib, se_dev_attrib); +#define SE_DEV_ATTR(_name, _mode) \ +static struct target_core_dev_attrib_attribute \ + target_core_dev_attrib_##_name = \ + __CONFIGFS_EATTR(_name, _mode, \ + target_core_dev_show_attr_##_name, \ + target_core_dev_store_attr_##_name); + +#define SE_DEV_ATTR_RO(_name); \ +static struct target_core_dev_attrib_attribute \ + target_core_dev_attrib_##_name = \ + __CONFIGFS_EATTR_RO(_name, \ + target_core_dev_show_attr_##_name); + +DEF_DEV_ATTRIB(emulate_dpo); +SE_DEV_ATTR(emulate_dpo, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB(emulate_fua_write); +SE_DEV_ATTR(emulate_fua_write, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB(emulate_fua_read); +SE_DEV_ATTR(emulate_fua_read, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB(emulate_write_cache); +SE_DEV_ATTR(emulate_write_cache, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB(emulate_ua_intlck_ctrl); +SE_DEV_ATTR(emulate_ua_intlck_ctrl, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB(emulate_tas); +SE_DEV_ATTR(emulate_tas, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB(emulate_tpu); +SE_DEV_ATTR(emulate_tpu, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB(emulate_tpws); +SE_DEV_ATTR(emulate_tpws, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB(enforce_pr_isids); +SE_DEV_ATTR(enforce_pr_isids, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB_RO(hw_block_size); +SE_DEV_ATTR_RO(hw_block_size); + +DEF_DEV_ATTRIB(block_size); +SE_DEV_ATTR(block_size, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB_RO(hw_max_sectors); +SE_DEV_ATTR_RO(hw_max_sectors); + +DEF_DEV_ATTRIB(max_sectors); +SE_DEV_ATTR(max_sectors, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB(optimal_sectors); +SE_DEV_ATTR(optimal_sectors, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB_RO(hw_queue_depth); +SE_DEV_ATTR_RO(hw_queue_depth); + +DEF_DEV_ATTRIB(queue_depth); +SE_DEV_ATTR(queue_depth, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB(task_timeout); +SE_DEV_ATTR(task_timeout, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB(max_unmap_lba_count); +SE_DEV_ATTR(max_unmap_lba_count, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB(max_unmap_block_desc_count); +SE_DEV_ATTR(max_unmap_block_desc_count, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB(unmap_granularity); +SE_DEV_ATTR(unmap_granularity, S_IRUGO | S_IWUSR); + +DEF_DEV_ATTRIB(unmap_granularity_alignment); +SE_DEV_ATTR(unmap_granularity_alignment, S_IRUGO | S_IWUSR); + +CONFIGFS_EATTR_OPS(target_core_dev_attrib, se_dev_attrib, da_group); + +static struct configfs_attribute *target_core_dev_attrib_attrs[] = { + &target_core_dev_attrib_emulate_dpo.attr, + &target_core_dev_attrib_emulate_fua_write.attr, + &target_core_dev_attrib_emulate_fua_read.attr, + &target_core_dev_attrib_emulate_write_cache.attr, + &target_core_dev_attrib_emulate_ua_intlck_ctrl.attr, + &target_core_dev_attrib_emulate_tas.attr, + &target_core_dev_attrib_emulate_tpu.attr, + &target_core_dev_attrib_emulate_tpws.attr, + &target_core_dev_attrib_enforce_pr_isids.attr, + &target_core_dev_attrib_hw_block_size.attr, + &target_core_dev_attrib_block_size.attr, + &target_core_dev_attrib_hw_max_sectors.attr, + &target_core_dev_attrib_max_sectors.attr, + &target_core_dev_attrib_optimal_sectors.attr, + &target_core_dev_attrib_hw_queue_depth.attr, + &target_core_dev_attrib_queue_depth.attr, + &target_core_dev_attrib_task_timeout.attr, + &target_core_dev_attrib_max_unmap_lba_count.attr, + &target_core_dev_attrib_max_unmap_block_desc_count.attr, + &target_core_dev_attrib_unmap_granularity.attr, + &target_core_dev_attrib_unmap_granularity_alignment.attr, + NULL, +}; + +static struct configfs_item_operations target_core_dev_attrib_ops = { + .show_attribute = target_core_dev_attrib_attr_show, + .store_attribute = target_core_dev_attrib_attr_store, +}; + +static struct config_item_type target_core_dev_attrib_cit = { + .ct_item_ops = &target_core_dev_attrib_ops, + .ct_attrs = target_core_dev_attrib_attrs, + .ct_owner = THIS_MODULE, +}; + +/* End functions for struct config_item_type target_core_dev_attrib_cit */ + +/* Start functions for struct config_item_type target_core_dev_wwn_cit */ + +CONFIGFS_EATTR_STRUCT(target_core_dev_wwn, t10_wwn); +#define SE_DEV_WWN_ATTR(_name, _mode) \ +static struct target_core_dev_wwn_attribute target_core_dev_wwn_##_name = \ + __CONFIGFS_EATTR(_name, _mode, \ + target_core_dev_wwn_show_attr_##_name, \ + target_core_dev_wwn_store_attr_##_name); + +#define SE_DEV_WWN_ATTR_RO(_name); \ +do { \ + static struct target_core_dev_wwn_attribute \ + target_core_dev_wwn_##_name = \ + __CONFIGFS_EATTR_RO(_name, \ + target_core_dev_wwn_show_attr_##_name); \ +} while (0); + +/* + * VPD page 0x80 Unit serial + */ +static ssize_t target_core_dev_wwn_show_attr_vpd_unit_serial( + struct t10_wwn *t10_wwn, + char *page) +{ + struct se_subsystem_dev *se_dev = t10_wwn->t10_sub_dev; + struct se_device *dev; + + dev = se_dev->se_dev_ptr; + if (!(dev)) + return -ENODEV; + + return sprintf(page, "T10 VPD Unit Serial Number: %s\n", + &t10_wwn->unit_serial[0]); +} + +static ssize_t target_core_dev_wwn_store_attr_vpd_unit_serial( + struct t10_wwn *t10_wwn, + const char *page, + size_t count) +{ + struct se_subsystem_dev *su_dev = t10_wwn->t10_sub_dev; + struct se_device *dev; + unsigned char buf[INQUIRY_VPD_SERIAL_LEN]; + + /* + * If Linux/SCSI subsystem_api_t plugin got a VPD Unit Serial + * from the struct scsi_device level firmware, do not allow + * VPD Unit Serial to be emulated. + * + * Note this struct scsi_device could also be emulating VPD + * information from its drivers/scsi LLD. But for now we assume + * it is doing 'the right thing' wrt a world wide unique + * VPD Unit Serial Number that OS dependent multipath can depend on. + */ + if (su_dev->su_dev_flags & SDF_FIRMWARE_VPD_UNIT_SERIAL) { + printk(KERN_ERR "Underlying SCSI device firmware provided VPD" + " Unit Serial, ignoring request\n"); + return -EOPNOTSUPP; + } + + if ((strlen(page) + 1) > INQUIRY_VPD_SERIAL_LEN) { + printk(KERN_ERR "Emulated VPD Unit Serial exceeds" + " INQUIRY_VPD_SERIAL_LEN: %d\n", INQUIRY_VPD_SERIAL_LEN); + return -EOVERFLOW; + } + /* + * Check to see if any active $FABRIC_MOD exports exist. If they + * do exist, fail here as changing this information on the fly + * (underneath the initiator side OS dependent multipath code) + * could cause negative effects. + */ + dev = su_dev->se_dev_ptr; + if ((dev)) { + if (atomic_read(&dev->dev_export_obj.obj_access_count)) { + printk(KERN_ERR "Unable to set VPD Unit Serial while" + " active %d $FABRIC_MOD exports exist\n", + atomic_read(&dev->dev_export_obj.obj_access_count)); + return -EINVAL; + } + } + /* + * This currently assumes ASCII encoding for emulated VPD Unit Serial. + * + * Also, strip any newline added from the userspace + * echo $UUID > $TARGET/$HBA/$STORAGE_OBJECT/wwn/vpd_unit_serial + */ + memset(buf, 0, INQUIRY_VPD_SERIAL_LEN); + snprintf(buf, INQUIRY_VPD_SERIAL_LEN, "%s", page); + snprintf(su_dev->t10_wwn.unit_serial, INQUIRY_VPD_SERIAL_LEN, + "%s", strstrip(buf)); + su_dev->su_dev_flags |= SDF_EMULATED_VPD_UNIT_SERIAL; + + printk(KERN_INFO "Target_Core_ConfigFS: Set emulated VPD Unit Serial:" + " %s\n", su_dev->t10_wwn.unit_serial); + + return count; +} + +SE_DEV_WWN_ATTR(vpd_unit_serial, S_IRUGO | S_IWUSR); + +/* + * VPD page 0x83 Protocol Identifier + */ +static ssize_t target_core_dev_wwn_show_attr_vpd_protocol_identifier( + struct t10_wwn *t10_wwn, + char *page) +{ + struct se_subsystem_dev *se_dev = t10_wwn->t10_sub_dev; + struct se_device *dev; + struct t10_vpd *vpd; + unsigned char buf[VPD_TMP_BUF_SIZE]; + ssize_t len = 0; + + dev = se_dev->se_dev_ptr; + if (!(dev)) + return -ENODEV; + + memset(buf, 0, VPD_TMP_BUF_SIZE); + + spin_lock(&t10_wwn->t10_vpd_lock); + list_for_each_entry(vpd, &t10_wwn->t10_vpd_list, vpd_list) { + if (!(vpd->protocol_identifier_set)) + continue; + + transport_dump_vpd_proto_id(vpd, buf, VPD_TMP_BUF_SIZE); + + if ((len + strlen(buf) > PAGE_SIZE)) + break; + + len += sprintf(page+len, "%s", buf); + } + spin_unlock(&t10_wwn->t10_vpd_lock); + + return len; +} + +static ssize_t target_core_dev_wwn_store_attr_vpd_protocol_identifier( + struct t10_wwn *t10_wwn, + const char *page, + size_t count) +{ + return -ENOSYS; +} + +SE_DEV_WWN_ATTR(vpd_protocol_identifier, S_IRUGO | S_IWUSR); + +/* + * Generic wrapper for dumping VPD identifiers by association. + */ +#define DEF_DEV_WWN_ASSOC_SHOW(_name, _assoc) \ +static ssize_t target_core_dev_wwn_show_attr_##_name( \ + struct t10_wwn *t10_wwn, \ + char *page) \ +{ \ + struct se_subsystem_dev *se_dev = t10_wwn->t10_sub_dev; \ + struct se_device *dev; \ + struct t10_vpd *vpd; \ + unsigned char buf[VPD_TMP_BUF_SIZE]; \ + ssize_t len = 0; \ + \ + dev = se_dev->se_dev_ptr; \ + if (!(dev)) \ + return -ENODEV; \ + \ + spin_lock(&t10_wwn->t10_vpd_lock); \ + list_for_each_entry(vpd, &t10_wwn->t10_vpd_list, vpd_list) { \ + if (vpd->association != _assoc) \ + continue; \ + \ + memset(buf, 0, VPD_TMP_BUF_SIZE); \ + transport_dump_vpd_assoc(vpd, buf, VPD_TMP_BUF_SIZE); \ + if ((len + strlen(buf) > PAGE_SIZE)) \ + break; \ + len += sprintf(page+len, "%s", buf); \ + \ + memset(buf, 0, VPD_TMP_BUF_SIZE); \ + transport_dump_vpd_ident_type(vpd, buf, VPD_TMP_BUF_SIZE); \ + if ((len + strlen(buf) > PAGE_SIZE)) \ + break; \ + len += sprintf(page+len, "%s", buf); \ + \ + memset(buf, 0, VPD_TMP_BUF_SIZE); \ + transport_dump_vpd_ident(vpd, buf, VPD_TMP_BUF_SIZE); \ + if ((len + strlen(buf) > PAGE_SIZE)) \ + break; \ + len += sprintf(page+len, "%s", buf); \ + } \ + spin_unlock(&t10_wwn->t10_vpd_lock); \ + \ + return len; \ +} + +/* + * VPD page 0x83 Assoication: Logical Unit + */ +DEF_DEV_WWN_ASSOC_SHOW(vpd_assoc_logical_unit, 0x00); + +static ssize_t target_core_dev_wwn_store_attr_vpd_assoc_logical_unit( + struct t10_wwn *t10_wwn, + const char *page, + size_t count) +{ + return -ENOSYS; +} + +SE_DEV_WWN_ATTR(vpd_assoc_logical_unit, S_IRUGO | S_IWUSR); + +/* + * VPD page 0x83 Association: Target Port + */ +DEF_DEV_WWN_ASSOC_SHOW(vpd_assoc_target_port, 0x10); + +static ssize_t target_core_dev_wwn_store_attr_vpd_assoc_target_port( + struct t10_wwn *t10_wwn, + const char *page, + size_t count) +{ + return -ENOSYS; +} + +SE_DEV_WWN_ATTR(vpd_assoc_target_port, S_IRUGO | S_IWUSR); + +/* + * VPD page 0x83 Association: SCSI Target Device + */ +DEF_DEV_WWN_ASSOC_SHOW(vpd_assoc_scsi_target_device, 0x20); + +static ssize_t target_core_dev_wwn_store_attr_vpd_assoc_scsi_target_device( + struct t10_wwn *t10_wwn, + const char *page, + size_t count) +{ + return -ENOSYS; +} + +SE_DEV_WWN_ATTR(vpd_assoc_scsi_target_device, S_IRUGO | S_IWUSR); + +CONFIGFS_EATTR_OPS(target_core_dev_wwn, t10_wwn, t10_wwn_group); + +static struct configfs_attribute *target_core_dev_wwn_attrs[] = { + &target_core_dev_wwn_vpd_unit_serial.attr, + &target_core_dev_wwn_vpd_protocol_identifier.attr, + &target_core_dev_wwn_vpd_assoc_logical_unit.attr, + &target_core_dev_wwn_vpd_assoc_target_port.attr, + &target_core_dev_wwn_vpd_assoc_scsi_target_device.attr, + NULL, +}; + +static struct configfs_item_operations target_core_dev_wwn_ops = { + .show_attribute = target_core_dev_wwn_attr_show, + .store_attribute = target_core_dev_wwn_attr_store, +}; + +static struct config_item_type target_core_dev_wwn_cit = { + .ct_item_ops = &target_core_dev_wwn_ops, + .ct_attrs = target_core_dev_wwn_attrs, + .ct_owner = THIS_MODULE, +}; + +/* End functions for struct config_item_type target_core_dev_wwn_cit */ + +/* Start functions for struct config_item_type target_core_dev_pr_cit */ + +CONFIGFS_EATTR_STRUCT(target_core_dev_pr, se_subsystem_dev); +#define SE_DEV_PR_ATTR(_name, _mode) \ +static struct target_core_dev_pr_attribute target_core_dev_pr_##_name = \ + __CONFIGFS_EATTR(_name, _mode, \ + target_core_dev_pr_show_attr_##_name, \ + target_core_dev_pr_store_attr_##_name); + +#define SE_DEV_PR_ATTR_RO(_name); \ +static struct target_core_dev_pr_attribute target_core_dev_pr_##_name = \ + __CONFIGFS_EATTR_RO(_name, \ + target_core_dev_pr_show_attr_##_name); + +/* + * res_holder + */ +static ssize_t target_core_dev_pr_show_spc3_res( + struct se_device *dev, + char *page, + ssize_t *len) +{ + struct se_node_acl *se_nacl; + struct t10_pr_registration *pr_reg; + char i_buf[PR_REG_ISID_ID_LEN]; + int prf_isid; + + memset(i_buf, 0, PR_REG_ISID_ID_LEN); + + spin_lock(&dev->dev_reservation_lock); + pr_reg = dev->dev_pr_res_holder; + if (!(pr_reg)) { + *len += sprintf(page + *len, "No SPC-3 Reservation holder\n"); + spin_unlock(&dev->dev_reservation_lock); + return *len; + } + se_nacl = pr_reg->pr_reg_nacl; + prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + + *len += sprintf(page + *len, "SPC-3 Reservation: %s Initiator: %s%s\n", + TPG_TFO(se_nacl->se_tpg)->get_fabric_name(), + se_nacl->initiatorname, (prf_isid) ? &i_buf[0] : ""); + spin_unlock(&dev->dev_reservation_lock); + + return *len; +} + +static ssize_t target_core_dev_pr_show_spc2_res( + struct se_device *dev, + char *page, + ssize_t *len) +{ + struct se_node_acl *se_nacl; + + spin_lock(&dev->dev_reservation_lock); + se_nacl = dev->dev_reserved_node_acl; + if (!(se_nacl)) { + *len += sprintf(page + *len, "No SPC-2 Reservation holder\n"); + spin_unlock(&dev->dev_reservation_lock); + return *len; + } + *len += sprintf(page + *len, "SPC-2 Reservation: %s Initiator: %s\n", + TPG_TFO(se_nacl->se_tpg)->get_fabric_name(), + se_nacl->initiatorname); + spin_unlock(&dev->dev_reservation_lock); + + return *len; +} + +static ssize_t target_core_dev_pr_show_attr_res_holder( + struct se_subsystem_dev *su_dev, + char *page) +{ + ssize_t len = 0; + + if (!(su_dev->se_dev_ptr)) + return -ENODEV; + + switch (T10_RES(su_dev)->res_type) { + case SPC3_PERSISTENT_RESERVATIONS: + target_core_dev_pr_show_spc3_res(su_dev->se_dev_ptr, + page, &len); + break; + case SPC2_RESERVATIONS: + target_core_dev_pr_show_spc2_res(su_dev->se_dev_ptr, + page, &len); + break; + case SPC_PASSTHROUGH: + len += sprintf(page+len, "Passthrough\n"); + break; + default: + len += sprintf(page+len, "Unknown\n"); + break; + } + + return len; +} + +SE_DEV_PR_ATTR_RO(res_holder); + +/* + * res_pr_all_tgt_pts + */ +static ssize_t target_core_dev_pr_show_attr_res_pr_all_tgt_pts( + struct se_subsystem_dev *su_dev, + char *page) +{ + struct se_device *dev; + struct t10_pr_registration *pr_reg; + ssize_t len = 0; + + dev = su_dev->se_dev_ptr; + if (!(dev)) + return -ENODEV; + + if (T10_RES(su_dev)->res_type != SPC3_PERSISTENT_RESERVATIONS) + return len; + + spin_lock(&dev->dev_reservation_lock); + pr_reg = dev->dev_pr_res_holder; + if (!(pr_reg)) { + len = sprintf(page, "No SPC-3 Reservation holder\n"); + spin_unlock(&dev->dev_reservation_lock); + return len; + } + /* + * See All Target Ports (ALL_TG_PT) bit in spcr17, section 6.14.3 + * Basic PERSISTENT RESERVER OUT parameter list, page 290 + */ + if (pr_reg->pr_reg_all_tg_pt) + len = sprintf(page, "SPC-3 Reservation: All Target" + " Ports registration\n"); + else + len = sprintf(page, "SPC-3 Reservation: Single" + " Target Port registration\n"); + spin_unlock(&dev->dev_reservation_lock); + + return len; +} + +SE_DEV_PR_ATTR_RO(res_pr_all_tgt_pts); + +/* + * res_pr_generation + */ +static ssize_t target_core_dev_pr_show_attr_res_pr_generation( + struct se_subsystem_dev *su_dev, + char *page) +{ + if (!(su_dev->se_dev_ptr)) + return -ENODEV; + + if (T10_RES(su_dev)->res_type != SPC3_PERSISTENT_RESERVATIONS) + return 0; + + return sprintf(page, "0x%08x\n", T10_RES(su_dev)->pr_generation); +} + +SE_DEV_PR_ATTR_RO(res_pr_generation); + +/* + * res_pr_holder_tg_port + */ +static ssize_t target_core_dev_pr_show_attr_res_pr_holder_tg_port( + struct se_subsystem_dev *su_dev, + char *page) +{ + struct se_device *dev; + struct se_node_acl *se_nacl; + struct se_lun *lun; + struct se_portal_group *se_tpg; + struct t10_pr_registration *pr_reg; + struct target_core_fabric_ops *tfo; + ssize_t len = 0; + + dev = su_dev->se_dev_ptr; + if (!(dev)) + return -ENODEV; + + if (T10_RES(su_dev)->res_type != SPC3_PERSISTENT_RESERVATIONS) + return len; + + spin_lock(&dev->dev_reservation_lock); + pr_reg = dev->dev_pr_res_holder; + if (!(pr_reg)) { + len = sprintf(page, "No SPC-3 Reservation holder\n"); + spin_unlock(&dev->dev_reservation_lock); + return len; + } + se_nacl = pr_reg->pr_reg_nacl; + se_tpg = se_nacl->se_tpg; + lun = pr_reg->pr_reg_tg_pt_lun; + tfo = TPG_TFO(se_tpg); + + len += sprintf(page+len, "SPC-3 Reservation: %s" + " Target Node Endpoint: %s\n", tfo->get_fabric_name(), + tfo->tpg_get_wwn(se_tpg)); + len += sprintf(page+len, "SPC-3 Reservation: Relative Port" + " Identifer Tag: %hu %s Portal Group Tag: %hu" + " %s Logical Unit: %u\n", lun->lun_sep->sep_rtpi, + tfo->get_fabric_name(), tfo->tpg_get_tag(se_tpg), + tfo->get_fabric_name(), lun->unpacked_lun); + spin_unlock(&dev->dev_reservation_lock); + + return len; +} + +SE_DEV_PR_ATTR_RO(res_pr_holder_tg_port); + +/* + * res_pr_registered_i_pts + */ +static ssize_t target_core_dev_pr_show_attr_res_pr_registered_i_pts( + struct se_subsystem_dev *su_dev, + char *page) +{ + struct target_core_fabric_ops *tfo; + struct t10_pr_registration *pr_reg; + unsigned char buf[384]; + char i_buf[PR_REG_ISID_ID_LEN]; + ssize_t len = 0; + int reg_count = 0, prf_isid; + + if (!(su_dev->se_dev_ptr)) + return -ENODEV; + + if (T10_RES(su_dev)->res_type != SPC3_PERSISTENT_RESERVATIONS) + return len; + + len += sprintf(page+len, "SPC-3 PR Registrations:\n"); + + spin_lock(&T10_RES(su_dev)->registration_lock); + list_for_each_entry(pr_reg, &T10_RES(su_dev)->registration_list, + pr_reg_list) { + + memset(buf, 0, 384); + memset(i_buf, 0, PR_REG_ISID_ID_LEN); + tfo = pr_reg->pr_reg_nacl->se_tpg->se_tpg_tfo; + prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + sprintf(buf, "%s Node: %s%s Key: 0x%016Lx PRgen: 0x%08x\n", + tfo->get_fabric_name(), + pr_reg->pr_reg_nacl->initiatorname, (prf_isid) ? + &i_buf[0] : "", pr_reg->pr_res_key, + pr_reg->pr_res_generation); + + if ((len + strlen(buf) > PAGE_SIZE)) + break; + + len += sprintf(page+len, "%s", buf); + reg_count++; + } + spin_unlock(&T10_RES(su_dev)->registration_lock); + + if (!(reg_count)) + len += sprintf(page+len, "None\n"); + + return len; +} + +SE_DEV_PR_ATTR_RO(res_pr_registered_i_pts); + +/* + * res_pr_type + */ +static ssize_t target_core_dev_pr_show_attr_res_pr_type( + struct se_subsystem_dev *su_dev, + char *page) +{ + struct se_device *dev; + struct t10_pr_registration *pr_reg; + ssize_t len = 0; + + dev = su_dev->se_dev_ptr; + if (!(dev)) + return -ENODEV; + + if (T10_RES(su_dev)->res_type != SPC3_PERSISTENT_RESERVATIONS) + return len; + + spin_lock(&dev->dev_reservation_lock); + pr_reg = dev->dev_pr_res_holder; + if (!(pr_reg)) { + len = sprintf(page, "No SPC-3 Reservation holder\n"); + spin_unlock(&dev->dev_reservation_lock); + return len; + } + len = sprintf(page, "SPC-3 Reservation Type: %s\n", + core_scsi3_pr_dump_type(pr_reg->pr_res_type)); + spin_unlock(&dev->dev_reservation_lock); + + return len; +} + +SE_DEV_PR_ATTR_RO(res_pr_type); + +/* + * res_type + */ +static ssize_t target_core_dev_pr_show_attr_res_type( + struct se_subsystem_dev *su_dev, + char *page) +{ + ssize_t len = 0; + + if (!(su_dev->se_dev_ptr)) + return -ENODEV; + + switch (T10_RES(su_dev)->res_type) { + case SPC3_PERSISTENT_RESERVATIONS: + len = sprintf(page, "SPC3_PERSISTENT_RESERVATIONS\n"); + break; + case SPC2_RESERVATIONS: + len = sprintf(page, "SPC2_RESERVATIONS\n"); + break; + case SPC_PASSTHROUGH: + len = sprintf(page, "SPC_PASSTHROUGH\n"); + break; + default: + len = sprintf(page, "UNKNOWN\n"); + break; + } + + return len; +} + +SE_DEV_PR_ATTR_RO(res_type); + +/* + * res_aptpl_active + */ + +static ssize_t target_core_dev_pr_show_attr_res_aptpl_active( + struct se_subsystem_dev *su_dev, + char *page) +{ + if (!(su_dev->se_dev_ptr)) + return -ENODEV; + + if (T10_RES(su_dev)->res_type != SPC3_PERSISTENT_RESERVATIONS) + return 0; + + return sprintf(page, "APTPL Bit Status: %s\n", + (T10_RES(su_dev)->pr_aptpl_active) ? "Activated" : "Disabled"); +} + +SE_DEV_PR_ATTR_RO(res_aptpl_active); + +/* + * res_aptpl_metadata + */ +static ssize_t target_core_dev_pr_show_attr_res_aptpl_metadata( + struct se_subsystem_dev *su_dev, + char *page) +{ + if (!(su_dev->se_dev_ptr)) + return -ENODEV; + + if (T10_RES(su_dev)->res_type != SPC3_PERSISTENT_RESERVATIONS) + return 0; + + return sprintf(page, "Ready to process PR APTPL metadata..\n"); +} + +enum { + Opt_initiator_fabric, Opt_initiator_node, Opt_initiator_sid, + Opt_sa_res_key, Opt_res_holder, Opt_res_type, Opt_res_scope, + Opt_res_all_tg_pt, Opt_mapped_lun, Opt_target_fabric, + Opt_target_node, Opt_tpgt, Opt_port_rtpi, Opt_target_lun, Opt_err +}; + +static match_table_t tokens = { + {Opt_initiator_fabric, "initiator_fabric=%s"}, + {Opt_initiator_node, "initiator_node=%s"}, + {Opt_initiator_sid, "initiator_sid=%s"}, + {Opt_sa_res_key, "sa_res_key=%s"}, + {Opt_res_holder, "res_holder=%d"}, + {Opt_res_type, "res_type=%d"}, + {Opt_res_scope, "res_scope=%d"}, + {Opt_res_all_tg_pt, "res_all_tg_pt=%d"}, + {Opt_mapped_lun, "mapped_lun=%d"}, + {Opt_target_fabric, "target_fabric=%s"}, + {Opt_target_node, "target_node=%s"}, + {Opt_tpgt, "tpgt=%d"}, + {Opt_port_rtpi, "port_rtpi=%d"}, + {Opt_target_lun, "target_lun=%d"}, + {Opt_err, NULL} +}; + +static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata( + struct se_subsystem_dev *su_dev, + const char *page, + size_t count) +{ + struct se_device *dev; + unsigned char *i_fabric, *t_fabric, *i_port = NULL, *t_port = NULL; + unsigned char *isid = NULL; + char *orig, *ptr, *arg_p, *opts; + substring_t args[MAX_OPT_ARGS]; + unsigned long long tmp_ll; + u64 sa_res_key = 0; + u32 mapped_lun = 0, target_lun = 0; + int ret = -1, res_holder = 0, all_tg_pt = 0, arg, token; + u16 port_rpti = 0, tpgt = 0; + u8 type = 0, scope; + + dev = su_dev->se_dev_ptr; + if (!(dev)) + return -ENODEV; + + if (T10_RES(su_dev)->res_type != SPC3_PERSISTENT_RESERVATIONS) + return 0; + + if (atomic_read(&dev->dev_export_obj.obj_access_count)) { + printk(KERN_INFO "Unable to process APTPL metadata while" + " active fabric exports exist\n"); + return -EINVAL; + } + + opts = kstrdup(page, GFP_KERNEL); + if (!opts) + return -ENOMEM; + + orig = opts; + while ((ptr = strsep(&opts, ",")) != NULL) { + if (!*ptr) + continue; + + token = match_token(ptr, tokens, args); + switch (token) { + case Opt_initiator_fabric: + i_fabric = match_strdup(&args[0]); + break; + case Opt_initiator_node: + i_port = match_strdup(&args[0]); + if (strlen(i_port) > PR_APTPL_MAX_IPORT_LEN) { + printk(KERN_ERR "APTPL metadata initiator_node=" + " exceeds PR_APTPL_MAX_IPORT_LEN: %d\n", + PR_APTPL_MAX_IPORT_LEN); + ret = -EINVAL; + break; + } + break; + case Opt_initiator_sid: + isid = match_strdup(&args[0]); + if (strlen(isid) > PR_REG_ISID_LEN) { + printk(KERN_ERR "APTPL metadata initiator_isid" + "= exceeds PR_REG_ISID_LEN: %d\n", + PR_REG_ISID_LEN); + ret = -EINVAL; + break; + } + break; + case Opt_sa_res_key: + arg_p = match_strdup(&args[0]); + ret = strict_strtoull(arg_p, 0, &tmp_ll); + if (ret < 0) { + printk(KERN_ERR "strict_strtoull() failed for" + " sa_res_key=\n"); + goto out; + } + sa_res_key = (u64)tmp_ll; + break; + /* + * PR APTPL Metadata for Reservation + */ + case Opt_res_holder: + match_int(args, &arg); + res_holder = arg; + break; + case Opt_res_type: + match_int(args, &arg); + type = (u8)arg; + break; + case Opt_res_scope: + match_int(args, &arg); + scope = (u8)arg; + break; + case Opt_res_all_tg_pt: + match_int(args, &arg); + all_tg_pt = (int)arg; + break; + case Opt_mapped_lun: + match_int(args, &arg); + mapped_lun = (u32)arg; + break; + /* + * PR APTPL Metadata for Target Port + */ + case Opt_target_fabric: + t_fabric = match_strdup(&args[0]); + break; + case Opt_target_node: + t_port = match_strdup(&args[0]); + if (strlen(t_port) > PR_APTPL_MAX_TPORT_LEN) { + printk(KERN_ERR "APTPL metadata target_node=" + " exceeds PR_APTPL_MAX_TPORT_LEN: %d\n", + PR_APTPL_MAX_TPORT_LEN); + ret = -EINVAL; + break; + } + break; + case Opt_tpgt: + match_int(args, &arg); + tpgt = (u16)arg; + break; + case Opt_port_rtpi: + match_int(args, &arg); + port_rpti = (u16)arg; + break; + case Opt_target_lun: + match_int(args, &arg); + target_lun = (u32)arg; + break; + default: + break; + } + } + + if (!(i_port) || !(t_port) || !(sa_res_key)) { + printk(KERN_ERR "Illegal parameters for APTPL registration\n"); + ret = -EINVAL; + goto out; + } + + if (res_holder && !(type)) { + printk(KERN_ERR "Illegal PR type: 0x%02x for reservation" + " holder\n", type); + ret = -EINVAL; + goto out; + } + + ret = core_scsi3_alloc_aptpl_registration(T10_RES(su_dev), sa_res_key, + i_port, isid, mapped_lun, t_port, tpgt, target_lun, + res_holder, all_tg_pt, type); +out: + kfree(orig); + return (ret == 0) ? count : ret; +} + +SE_DEV_PR_ATTR(res_aptpl_metadata, S_IRUGO | S_IWUSR); + +CONFIGFS_EATTR_OPS(target_core_dev_pr, se_subsystem_dev, se_dev_pr_group); + +static struct configfs_attribute *target_core_dev_pr_attrs[] = { + &target_core_dev_pr_res_holder.attr, + &target_core_dev_pr_res_pr_all_tgt_pts.attr, + &target_core_dev_pr_res_pr_generation.attr, + &target_core_dev_pr_res_pr_holder_tg_port.attr, + &target_core_dev_pr_res_pr_registered_i_pts.attr, + &target_core_dev_pr_res_pr_type.attr, + &target_core_dev_pr_res_type.attr, + &target_core_dev_pr_res_aptpl_active.attr, + &target_core_dev_pr_res_aptpl_metadata.attr, + NULL, +}; + +static struct configfs_item_operations target_core_dev_pr_ops = { + .show_attribute = target_core_dev_pr_attr_show, + .store_attribute = target_core_dev_pr_attr_store, +}; + +static struct config_item_type target_core_dev_pr_cit = { + .ct_item_ops = &target_core_dev_pr_ops, + .ct_attrs = target_core_dev_pr_attrs, + .ct_owner = THIS_MODULE, +}; + +/* End functions for struct config_item_type target_core_dev_pr_cit */ + +/* Start functions for struct config_item_type target_core_dev_cit */ + +static ssize_t target_core_show_dev_info(void *p, char *page) +{ + struct se_subsystem_dev *se_dev = (struct se_subsystem_dev *)p; + struct se_hba *hba = se_dev->se_dev_hba; + struct se_subsystem_api *t = hba->transport; + int bl = 0; + ssize_t read_bytes = 0; + + if (!(se_dev->se_dev_ptr)) + return -ENODEV; + + transport_dump_dev_state(se_dev->se_dev_ptr, page, &bl); + read_bytes += bl; + read_bytes += t->show_configfs_dev_params(hba, se_dev, page+read_bytes); + return read_bytes; +} + +static struct target_core_configfs_attribute target_core_attr_dev_info = { + .attr = { .ca_owner = THIS_MODULE, + .ca_name = "info", + .ca_mode = S_IRUGO }, + .show = target_core_show_dev_info, + .store = NULL, +}; + +static ssize_t target_core_store_dev_control( + void *p, + const char *page, + size_t count) +{ + struct se_subsystem_dev *se_dev = (struct se_subsystem_dev *)p; + struct se_hba *hba = se_dev->se_dev_hba; + struct se_subsystem_api *t = hba->transport; + + if (!(se_dev->se_dev_su_ptr)) { + printk(KERN_ERR "Unable to locate struct se_subsystem_dev>se" + "_dev_su_ptr\n"); + return -EINVAL; + } + + return t->set_configfs_dev_params(hba, se_dev, page, count); +} + +static struct target_core_configfs_attribute target_core_attr_dev_control = { + .attr = { .ca_owner = THIS_MODULE, + .ca_name = "control", + .ca_mode = S_IWUSR }, + .show = NULL, + .store = target_core_store_dev_control, +}; + +static ssize_t target_core_show_dev_alias(void *p, char *page) +{ + struct se_subsystem_dev *se_dev = (struct se_subsystem_dev *)p; + + if (!(se_dev->su_dev_flags & SDF_USING_ALIAS)) + return 0; + + return snprintf(page, PAGE_SIZE, "%s\n", se_dev->se_dev_alias); +} + +static ssize_t target_core_store_dev_alias( + void *p, + const char *page, + size_t count) +{ + struct se_subsystem_dev *se_dev = (struct se_subsystem_dev *)p; + struct se_hba *hba = se_dev->se_dev_hba; + ssize_t read_bytes; + + if (count > (SE_DEV_ALIAS_LEN-1)) { + printk(KERN_ERR "alias count: %d exceeds" + " SE_DEV_ALIAS_LEN-1: %u\n", (int)count, + SE_DEV_ALIAS_LEN-1); + return -EINVAL; + } + + se_dev->su_dev_flags |= SDF_USING_ALIAS; + read_bytes = snprintf(&se_dev->se_dev_alias[0], SE_DEV_ALIAS_LEN, + "%s", page); + + printk(KERN_INFO "Target_Core_ConfigFS: %s/%s set alias: %s\n", + config_item_name(&hba->hba_group.cg_item), + config_item_name(&se_dev->se_dev_group.cg_item), + se_dev->se_dev_alias); + + return read_bytes; +} + +static struct target_core_configfs_attribute target_core_attr_dev_alias = { + .attr = { .ca_owner = THIS_MODULE, + .ca_name = "alias", + .ca_mode = S_IRUGO | S_IWUSR }, + .show = target_core_show_dev_alias, + .store = target_core_store_dev_alias, +}; + +static ssize_t target_core_show_dev_udev_path(void *p, char *page) +{ + struct se_subsystem_dev *se_dev = (struct se_subsystem_dev *)p; + + if (!(se_dev->su_dev_flags & SDF_USING_UDEV_PATH)) + return 0; + + return snprintf(page, PAGE_SIZE, "%s\n", se_dev->se_dev_udev_path); +} + +static ssize_t target_core_store_dev_udev_path( + void *p, + const char *page, + size_t count) +{ + struct se_subsystem_dev *se_dev = (struct se_subsystem_dev *)p; + struct se_hba *hba = se_dev->se_dev_hba; + ssize_t read_bytes; + + if (count > (SE_UDEV_PATH_LEN-1)) { + printk(KERN_ERR "udev_path count: %d exceeds" + " SE_UDEV_PATH_LEN-1: %u\n", (int)count, + SE_UDEV_PATH_LEN-1); + return -EINVAL; + } + + se_dev->su_dev_flags |= SDF_USING_UDEV_PATH; + read_bytes = snprintf(&se_dev->se_dev_udev_path[0], SE_UDEV_PATH_LEN, + "%s", page); + + printk(KERN_INFO "Target_Core_ConfigFS: %s/%s set udev_path: %s\n", + config_item_name(&hba->hba_group.cg_item), + config_item_name(&se_dev->se_dev_group.cg_item), + se_dev->se_dev_udev_path); + + return read_bytes; +} + +static struct target_core_configfs_attribute target_core_attr_dev_udev_path = { + .attr = { .ca_owner = THIS_MODULE, + .ca_name = "udev_path", + .ca_mode = S_IRUGO | S_IWUSR }, + .show = target_core_show_dev_udev_path, + .store = target_core_store_dev_udev_path, +}; + +static ssize_t target_core_store_dev_enable( + void *p, + const char *page, + size_t count) +{ + struct se_subsystem_dev *se_dev = (struct se_subsystem_dev *)p; + struct se_device *dev; + struct se_hba *hba = se_dev->se_dev_hba; + struct se_subsystem_api *t = hba->transport; + char *ptr; + + ptr = strstr(page, "1"); + if (!(ptr)) { + printk(KERN_ERR "For dev_enable ops, only valid value" + " is \"1\"\n"); + return -EINVAL; + } + if ((se_dev->se_dev_ptr)) { + printk(KERN_ERR "se_dev->se_dev_ptr already set for storage" + " object\n"); + return -EEXIST; + } + + if (t->check_configfs_dev_params(hba, se_dev) < 0) + return -EINVAL; + + dev = t->create_virtdevice(hba, se_dev, se_dev->se_dev_su_ptr); + if (!(dev) || IS_ERR(dev)) + return -EINVAL; + + se_dev->se_dev_ptr = dev; + printk(KERN_INFO "Target_Core_ConfigFS: Registered se_dev->se_dev_ptr:" + " %p\n", se_dev->se_dev_ptr); + + return count; +} + +static struct target_core_configfs_attribute target_core_attr_dev_enable = { + .attr = { .ca_owner = THIS_MODULE, + .ca_name = "enable", + .ca_mode = S_IWUSR }, + .show = NULL, + .store = target_core_store_dev_enable, +}; + +static ssize_t target_core_show_alua_lu_gp(void *p, char *page) +{ + struct se_device *dev; + struct se_subsystem_dev *su_dev = (struct se_subsystem_dev *)p; + struct config_item *lu_ci; + struct t10_alua_lu_gp *lu_gp; + struct t10_alua_lu_gp_member *lu_gp_mem; + ssize_t len = 0; + + dev = su_dev->se_dev_ptr; + if (!(dev)) + return -ENODEV; + + if (T10_ALUA(su_dev)->alua_type != SPC3_ALUA_EMULATED) + return len; + + lu_gp_mem = dev->dev_alua_lu_gp_mem; + if (!(lu_gp_mem)) { + printk(KERN_ERR "NULL struct se_device->dev_alua_lu_gp_mem" + " pointer\n"); + return -EINVAL; + } + + spin_lock(&lu_gp_mem->lu_gp_mem_lock); + lu_gp = lu_gp_mem->lu_gp; + if ((lu_gp)) { + lu_ci = &lu_gp->lu_gp_group.cg_item; + len += sprintf(page, "LU Group Alias: %s\nLU Group ID: %hu\n", + config_item_name(lu_ci), lu_gp->lu_gp_id); + } + spin_unlock(&lu_gp_mem->lu_gp_mem_lock); + + return len; +} + +static ssize_t target_core_store_alua_lu_gp( + void *p, + const char *page, + size_t count) +{ + struct se_device *dev; + struct se_subsystem_dev *su_dev = (struct se_subsystem_dev *)p; + struct se_hba *hba = su_dev->se_dev_hba; + struct t10_alua_lu_gp *lu_gp = NULL, *lu_gp_new = NULL; + struct t10_alua_lu_gp_member *lu_gp_mem; + unsigned char buf[LU_GROUP_NAME_BUF]; + int move = 0; + + dev = su_dev->se_dev_ptr; + if (!(dev)) + return -ENODEV; + + if (T10_ALUA(su_dev)->alua_type != SPC3_ALUA_EMULATED) { + printk(KERN_WARNING "SPC3_ALUA_EMULATED not enabled for %s/%s\n", + config_item_name(&hba->hba_group.cg_item), + config_item_name(&su_dev->se_dev_group.cg_item)); + return -EINVAL; + } + if (count > LU_GROUP_NAME_BUF) { + printk(KERN_ERR "ALUA LU Group Alias too large!\n"); + return -EINVAL; + } + memset(buf, 0, LU_GROUP_NAME_BUF); + memcpy(buf, page, count); + /* + * Any ALUA logical unit alias besides "NULL" means we will be + * making a new group association. + */ + if (strcmp(strstrip(buf), "NULL")) { + /* + * core_alua_get_lu_gp_by_name() will increment reference to + * struct t10_alua_lu_gp. This reference is released with + * core_alua_get_lu_gp_by_name below(). + */ + lu_gp_new = core_alua_get_lu_gp_by_name(strstrip(buf)); + if (!(lu_gp_new)) + return -ENODEV; + } + lu_gp_mem = dev->dev_alua_lu_gp_mem; + if (!(lu_gp_mem)) { + if (lu_gp_new) + core_alua_put_lu_gp_from_name(lu_gp_new); + printk(KERN_ERR "NULL struct se_device->dev_alua_lu_gp_mem" + " pointer\n"); + return -EINVAL; + } + + spin_lock(&lu_gp_mem->lu_gp_mem_lock); + lu_gp = lu_gp_mem->lu_gp; + if ((lu_gp)) { + /* + * Clearing an existing lu_gp association, and replacing + * with NULL + */ + if (!(lu_gp_new)) { + printk(KERN_INFO "Target_Core_ConfigFS: Releasing %s/%s" + " from ALUA LU Group: core/alua/lu_gps/%s, ID:" + " %hu\n", + config_item_name(&hba->hba_group.cg_item), + config_item_name(&su_dev->se_dev_group.cg_item), + config_item_name(&lu_gp->lu_gp_group.cg_item), + lu_gp->lu_gp_id); + + __core_alua_drop_lu_gp_mem(lu_gp_mem, lu_gp); + spin_unlock(&lu_gp_mem->lu_gp_mem_lock); + + return count; + } + /* + * Removing existing association of lu_gp_mem with lu_gp + */ + __core_alua_drop_lu_gp_mem(lu_gp_mem, lu_gp); + move = 1; + } + /* + * Associate lu_gp_mem with lu_gp_new. + */ + __core_alua_attach_lu_gp_mem(lu_gp_mem, lu_gp_new); + spin_unlock(&lu_gp_mem->lu_gp_mem_lock); + + printk(KERN_INFO "Target_Core_ConfigFS: %s %s/%s to ALUA LU Group:" + " core/alua/lu_gps/%s, ID: %hu\n", + (move) ? "Moving" : "Adding", + config_item_name(&hba->hba_group.cg_item), + config_item_name(&su_dev->se_dev_group.cg_item), + config_item_name(&lu_gp_new->lu_gp_group.cg_item), + lu_gp_new->lu_gp_id); + + core_alua_put_lu_gp_from_name(lu_gp_new); + return count; +} + +static struct target_core_configfs_attribute target_core_attr_dev_alua_lu_gp = { + .attr = { .ca_owner = THIS_MODULE, + .ca_name = "alua_lu_gp", + .ca_mode = S_IRUGO | S_IWUSR }, + .show = target_core_show_alua_lu_gp, + .store = target_core_store_alua_lu_gp, +}; + +static struct configfs_attribute *lio_core_dev_attrs[] = { + &target_core_attr_dev_info.attr, + &target_core_attr_dev_control.attr, + &target_core_attr_dev_alias.attr, + &target_core_attr_dev_udev_path.attr, + &target_core_attr_dev_enable.attr, + &target_core_attr_dev_alua_lu_gp.attr, + NULL, +}; + +static void target_core_dev_release(struct config_item *item) +{ + struct se_subsystem_dev *se_dev = container_of(to_config_group(item), + struct se_subsystem_dev, se_dev_group); + struct config_group *dev_cg; + + if (!(se_dev)) + return; + + dev_cg = &se_dev->se_dev_group; + kfree(dev_cg->default_groups); +} + +static ssize_t target_core_dev_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + struct se_subsystem_dev *se_dev = container_of( + to_config_group(item), struct se_subsystem_dev, + se_dev_group); + struct target_core_configfs_attribute *tc_attr = container_of( + attr, struct target_core_configfs_attribute, attr); + + if (!(tc_attr->show)) + return -EINVAL; + + return tc_attr->show((void *)se_dev, page); +} + +static ssize_t target_core_dev_store(struct config_item *item, + struct configfs_attribute *attr, + const char *page, size_t count) +{ + struct se_subsystem_dev *se_dev = container_of( + to_config_group(item), struct se_subsystem_dev, + se_dev_group); + struct target_core_configfs_attribute *tc_attr = container_of( + attr, struct target_core_configfs_attribute, attr); + + if (!(tc_attr->store)) + return -EINVAL; + + return tc_attr->store((void *)se_dev, page, count); +} + +static struct configfs_item_operations target_core_dev_item_ops = { + .release = target_core_dev_release, + .show_attribute = target_core_dev_show, + .store_attribute = target_core_dev_store, +}; + +static struct config_item_type target_core_dev_cit = { + .ct_item_ops = &target_core_dev_item_ops, + .ct_attrs = lio_core_dev_attrs, + .ct_owner = THIS_MODULE, +}; + +/* End functions for struct config_item_type target_core_dev_cit */ + +/* Start functions for struct config_item_type target_core_alua_lu_gp_cit */ + +CONFIGFS_EATTR_STRUCT(target_core_alua_lu_gp, t10_alua_lu_gp); +#define SE_DEV_ALUA_LU_ATTR(_name, _mode) \ +static struct target_core_alua_lu_gp_attribute \ + target_core_alua_lu_gp_##_name = \ + __CONFIGFS_EATTR(_name, _mode, \ + target_core_alua_lu_gp_show_attr_##_name, \ + target_core_alua_lu_gp_store_attr_##_name); + +#define SE_DEV_ALUA_LU_ATTR_RO(_name) \ +static struct target_core_alua_lu_gp_attribute \ + target_core_alua_lu_gp_##_name = \ + __CONFIGFS_EATTR_RO(_name, \ + target_core_alua_lu_gp_show_attr_##_name); + +/* + * lu_gp_id + */ +static ssize_t target_core_alua_lu_gp_show_attr_lu_gp_id( + struct t10_alua_lu_gp *lu_gp, + char *page) +{ + if (!(lu_gp->lu_gp_valid_id)) + return 0; + + return sprintf(page, "%hu\n", lu_gp->lu_gp_id); +} + +static ssize_t target_core_alua_lu_gp_store_attr_lu_gp_id( + struct t10_alua_lu_gp *lu_gp, + const char *page, + size_t count) +{ + struct config_group *alua_lu_gp_cg = &lu_gp->lu_gp_group; + unsigned long lu_gp_id; + int ret; + + ret = strict_strtoul(page, 0, &lu_gp_id); + if (ret < 0) { + printk(KERN_ERR "strict_strtoul() returned %d for" + " lu_gp_id\n", ret); + return -EINVAL; + } + if (lu_gp_id > 0x0000ffff) { + printk(KERN_ERR "ALUA lu_gp_id: %lu exceeds maximum:" + " 0x0000ffff\n", lu_gp_id); + return -EINVAL; + } + + ret = core_alua_set_lu_gp_id(lu_gp, (u16)lu_gp_id); + if (ret < 0) + return -EINVAL; + + printk(KERN_INFO "Target_Core_ConfigFS: Set ALUA Logical Unit" + " Group: core/alua/lu_gps/%s to ID: %hu\n", + config_item_name(&alua_lu_gp_cg->cg_item), + lu_gp->lu_gp_id); + + return count; +} + +SE_DEV_ALUA_LU_ATTR(lu_gp_id, S_IRUGO | S_IWUSR); + +/* + * members + */ +static ssize_t target_core_alua_lu_gp_show_attr_members( + struct t10_alua_lu_gp *lu_gp, + char *page) +{ + struct se_device *dev; + struct se_hba *hba; + struct se_subsystem_dev *su_dev; + struct t10_alua_lu_gp_member *lu_gp_mem; + ssize_t len = 0, cur_len; + unsigned char buf[LU_GROUP_NAME_BUF]; + + memset(buf, 0, LU_GROUP_NAME_BUF); + + spin_lock(&lu_gp->lu_gp_lock); + list_for_each_entry(lu_gp_mem, &lu_gp->lu_gp_mem_list, lu_gp_mem_list) { + dev = lu_gp_mem->lu_gp_mem_dev; + su_dev = dev->se_sub_dev; + hba = su_dev->se_dev_hba; + + cur_len = snprintf(buf, LU_GROUP_NAME_BUF, "%s/%s\n", + config_item_name(&hba->hba_group.cg_item), + config_item_name(&su_dev->se_dev_group.cg_item)); + cur_len++; /* Extra byte for NULL terminator */ + + if ((cur_len + len) > PAGE_SIZE) { + printk(KERN_WARNING "Ran out of lu_gp_show_attr" + "_members buffer\n"); + break; + } + memcpy(page+len, buf, cur_len); + len += cur_len; + } + spin_unlock(&lu_gp->lu_gp_lock); + + return len; +} + +SE_DEV_ALUA_LU_ATTR_RO(members); + +CONFIGFS_EATTR_OPS(target_core_alua_lu_gp, t10_alua_lu_gp, lu_gp_group); + +static struct configfs_attribute *target_core_alua_lu_gp_attrs[] = { + &target_core_alua_lu_gp_lu_gp_id.attr, + &target_core_alua_lu_gp_members.attr, + NULL, +}; + +static struct configfs_item_operations target_core_alua_lu_gp_ops = { + .show_attribute = target_core_alua_lu_gp_attr_show, + .store_attribute = target_core_alua_lu_gp_attr_store, +}; + +static struct config_item_type target_core_alua_lu_gp_cit = { + .ct_item_ops = &target_core_alua_lu_gp_ops, + .ct_attrs = target_core_alua_lu_gp_attrs, + .ct_owner = THIS_MODULE, +}; + +/* End functions for struct config_item_type target_core_alua_lu_gp_cit */ + +/* Start functions for struct config_item_type target_core_alua_lu_gps_cit */ + +static struct config_group *target_core_alua_create_lu_gp( + struct config_group *group, + const char *name) +{ + struct t10_alua_lu_gp *lu_gp; + struct config_group *alua_lu_gp_cg = NULL; + struct config_item *alua_lu_gp_ci = NULL; + + lu_gp = core_alua_allocate_lu_gp(name, 0); + if (IS_ERR(lu_gp)) + return NULL; + + alua_lu_gp_cg = &lu_gp->lu_gp_group; + alua_lu_gp_ci = &alua_lu_gp_cg->cg_item; + + config_group_init_type_name(alua_lu_gp_cg, name, + &target_core_alua_lu_gp_cit); + + printk(KERN_INFO "Target_Core_ConfigFS: Allocated ALUA Logical Unit" + " Group: core/alua/lu_gps/%s\n", + config_item_name(alua_lu_gp_ci)); + + return alua_lu_gp_cg; + +} + +static void target_core_alua_drop_lu_gp( + struct config_group *group, + struct config_item *item) +{ + struct t10_alua_lu_gp *lu_gp = container_of(to_config_group(item), + struct t10_alua_lu_gp, lu_gp_group); + + printk(KERN_INFO "Target_Core_ConfigFS: Releasing ALUA Logical Unit" + " Group: core/alua/lu_gps/%s, ID: %hu\n", + config_item_name(item), lu_gp->lu_gp_id); + + config_item_put(item); + core_alua_free_lu_gp(lu_gp); +} + +static struct configfs_group_operations target_core_alua_lu_gps_group_ops = { + .make_group = &target_core_alua_create_lu_gp, + .drop_item = &target_core_alua_drop_lu_gp, +}; + +static struct config_item_type target_core_alua_lu_gps_cit = { + .ct_item_ops = NULL, + .ct_group_ops = &target_core_alua_lu_gps_group_ops, + .ct_owner = THIS_MODULE, +}; + +/* End functions for struct config_item_type target_core_alua_lu_gps_cit */ + +/* Start functions for struct config_item_type target_core_alua_tg_pt_gp_cit */ + +CONFIGFS_EATTR_STRUCT(target_core_alua_tg_pt_gp, t10_alua_tg_pt_gp); +#define SE_DEV_ALUA_TG_PT_ATTR(_name, _mode) \ +static struct target_core_alua_tg_pt_gp_attribute \ + target_core_alua_tg_pt_gp_##_name = \ + __CONFIGFS_EATTR(_name, _mode, \ + target_core_alua_tg_pt_gp_show_attr_##_name, \ + target_core_alua_tg_pt_gp_store_attr_##_name); + +#define SE_DEV_ALUA_TG_PT_ATTR_RO(_name) \ +static struct target_core_alua_tg_pt_gp_attribute \ + target_core_alua_tg_pt_gp_##_name = \ + __CONFIGFS_EATTR_RO(_name, \ + target_core_alua_tg_pt_gp_show_attr_##_name); + +/* + * alua_access_state + */ +static ssize_t target_core_alua_tg_pt_gp_show_attr_alua_access_state( + struct t10_alua_tg_pt_gp *tg_pt_gp, + char *page) +{ + return sprintf(page, "%d\n", + atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state)); +} + +static ssize_t target_core_alua_tg_pt_gp_store_attr_alua_access_state( + struct t10_alua_tg_pt_gp *tg_pt_gp, + const char *page, + size_t count) +{ + struct se_subsystem_dev *su_dev = tg_pt_gp->tg_pt_gp_su_dev; + unsigned long tmp; + int new_state, ret; + + if (!(tg_pt_gp->tg_pt_gp_valid_id)) { + printk(KERN_ERR "Unable to do implict ALUA on non valid" + " tg_pt_gp ID: %hu\n", tg_pt_gp->tg_pt_gp_valid_id); + return -EINVAL; + } + + ret = strict_strtoul(page, 0, &tmp); + if (ret < 0) { + printk("Unable to extract new ALUA access state from" + " %s\n", page); + return -EINVAL; + } + new_state = (int)tmp; + + if (!(tg_pt_gp->tg_pt_gp_alua_access_type & TPGS_IMPLICT_ALUA)) { + printk(KERN_ERR "Unable to process implict configfs ALUA" + " transition while TPGS_IMPLICT_ALUA is diabled\n"); + return -EINVAL; + } + + ret = core_alua_do_port_transition(tg_pt_gp, su_dev->se_dev_ptr, + NULL, NULL, new_state, 0); + return (!ret) ? count : -EINVAL; +} + +SE_DEV_ALUA_TG_PT_ATTR(alua_access_state, S_IRUGO | S_IWUSR); + +/* + * alua_access_status + */ +static ssize_t target_core_alua_tg_pt_gp_show_attr_alua_access_status( + struct t10_alua_tg_pt_gp *tg_pt_gp, + char *page) +{ + return sprintf(page, "%s\n", + core_alua_dump_status(tg_pt_gp->tg_pt_gp_alua_access_status)); +} + +static ssize_t target_core_alua_tg_pt_gp_store_attr_alua_access_status( + struct t10_alua_tg_pt_gp *tg_pt_gp, + const char *page, + size_t count) +{ + unsigned long tmp; + int new_status, ret; + + if (!(tg_pt_gp->tg_pt_gp_valid_id)) { + printk(KERN_ERR "Unable to do set ALUA access status on non" + " valid tg_pt_gp ID: %hu\n", + tg_pt_gp->tg_pt_gp_valid_id); + return -EINVAL; + } + + ret = strict_strtoul(page, 0, &tmp); + if (ret < 0) { + printk(KERN_ERR "Unable to extract new ALUA access status" + " from %s\n", page); + return -EINVAL; + } + new_status = (int)tmp; + + if ((new_status != ALUA_STATUS_NONE) && + (new_status != ALUA_STATUS_ALTERED_BY_EXPLICT_STPG) && + (new_status != ALUA_STATUS_ALTERED_BY_IMPLICT_ALUA)) { + printk(KERN_ERR "Illegal ALUA access status: 0x%02x\n", + new_status); + return -EINVAL; + } + + tg_pt_gp->tg_pt_gp_alua_access_status = new_status; + return count; +} + +SE_DEV_ALUA_TG_PT_ATTR(alua_access_status, S_IRUGO | S_IWUSR); + +/* + * alua_access_type + */ +static ssize_t target_core_alua_tg_pt_gp_show_attr_alua_access_type( + struct t10_alua_tg_pt_gp *tg_pt_gp, + char *page) +{ + return core_alua_show_access_type(tg_pt_gp, page); +} + +static ssize_t target_core_alua_tg_pt_gp_store_attr_alua_access_type( + struct t10_alua_tg_pt_gp *tg_pt_gp, + const char *page, + size_t count) +{ + return core_alua_store_access_type(tg_pt_gp, page, count); +} + +SE_DEV_ALUA_TG_PT_ATTR(alua_access_type, S_IRUGO | S_IWUSR); + +/* + * alua_write_metadata + */ +static ssize_t target_core_alua_tg_pt_gp_show_attr_alua_write_metadata( + struct t10_alua_tg_pt_gp *tg_pt_gp, + char *page) +{ + return sprintf(page, "%d\n", tg_pt_gp->tg_pt_gp_write_metadata); +} + +static ssize_t target_core_alua_tg_pt_gp_store_attr_alua_write_metadata( + struct t10_alua_tg_pt_gp *tg_pt_gp, + const char *page, + size_t count) +{ + unsigned long tmp; + int ret; + + ret = strict_strtoul(page, 0, &tmp); + if (ret < 0) { + printk(KERN_ERR "Unable to extract alua_write_metadata\n"); + return -EINVAL; + } + + if ((tmp != 0) && (tmp != 1)) { + printk(KERN_ERR "Illegal value for alua_write_metadata:" + " %lu\n", tmp); + return -EINVAL; + } + tg_pt_gp->tg_pt_gp_write_metadata = (int)tmp; + + return count; +} + +SE_DEV_ALUA_TG_PT_ATTR(alua_write_metadata, S_IRUGO | S_IWUSR); + + + +/* + * nonop_delay_msecs + */ +static ssize_t target_core_alua_tg_pt_gp_show_attr_nonop_delay_msecs( + struct t10_alua_tg_pt_gp *tg_pt_gp, + char *page) +{ + return core_alua_show_nonop_delay_msecs(tg_pt_gp, page); + +} + +static ssize_t target_core_alua_tg_pt_gp_store_attr_nonop_delay_msecs( + struct t10_alua_tg_pt_gp *tg_pt_gp, + const char *page, + size_t count) +{ + return core_alua_store_nonop_delay_msecs(tg_pt_gp, page, count); +} + +SE_DEV_ALUA_TG_PT_ATTR(nonop_delay_msecs, S_IRUGO | S_IWUSR); + +/* + * trans_delay_msecs + */ +static ssize_t target_core_alua_tg_pt_gp_show_attr_trans_delay_msecs( + struct t10_alua_tg_pt_gp *tg_pt_gp, + char *page) +{ + return core_alua_show_trans_delay_msecs(tg_pt_gp, page); +} + +static ssize_t target_core_alua_tg_pt_gp_store_attr_trans_delay_msecs( + struct t10_alua_tg_pt_gp *tg_pt_gp, + const char *page, + size_t count) +{ + return core_alua_store_trans_delay_msecs(tg_pt_gp, page, count); +} + +SE_DEV_ALUA_TG_PT_ATTR(trans_delay_msecs, S_IRUGO | S_IWUSR); + +/* + * preferred + */ + +static ssize_t target_core_alua_tg_pt_gp_show_attr_preferred( + struct t10_alua_tg_pt_gp *tg_pt_gp, + char *page) +{ + return core_alua_show_preferred_bit(tg_pt_gp, page); +} + +static ssize_t target_core_alua_tg_pt_gp_store_attr_preferred( + struct t10_alua_tg_pt_gp *tg_pt_gp, + const char *page, + size_t count) +{ + return core_alua_store_preferred_bit(tg_pt_gp, page, count); +} + +SE_DEV_ALUA_TG_PT_ATTR(preferred, S_IRUGO | S_IWUSR); + +/* + * tg_pt_gp_id + */ +static ssize_t target_core_alua_tg_pt_gp_show_attr_tg_pt_gp_id( + struct t10_alua_tg_pt_gp *tg_pt_gp, + char *page) +{ + if (!(tg_pt_gp->tg_pt_gp_valid_id)) + return 0; + + return sprintf(page, "%hu\n", tg_pt_gp->tg_pt_gp_id); +} + +static ssize_t target_core_alua_tg_pt_gp_store_attr_tg_pt_gp_id( + struct t10_alua_tg_pt_gp *tg_pt_gp, + const char *page, + size_t count) +{ + struct config_group *alua_tg_pt_gp_cg = &tg_pt_gp->tg_pt_gp_group; + unsigned long tg_pt_gp_id; + int ret; + + ret = strict_strtoul(page, 0, &tg_pt_gp_id); + if (ret < 0) { + printk(KERN_ERR "strict_strtoul() returned %d for" + " tg_pt_gp_id\n", ret); + return -EINVAL; + } + if (tg_pt_gp_id > 0x0000ffff) { + printk(KERN_ERR "ALUA tg_pt_gp_id: %lu exceeds maximum:" + " 0x0000ffff\n", tg_pt_gp_id); + return -EINVAL; + } + + ret = core_alua_set_tg_pt_gp_id(tg_pt_gp, (u16)tg_pt_gp_id); + if (ret < 0) + return -EINVAL; + + printk(KERN_INFO "Target_Core_ConfigFS: Set ALUA Target Port Group: " + "core/alua/tg_pt_gps/%s to ID: %hu\n", + config_item_name(&alua_tg_pt_gp_cg->cg_item), + tg_pt_gp->tg_pt_gp_id); + + return count; +} + +SE_DEV_ALUA_TG_PT_ATTR(tg_pt_gp_id, S_IRUGO | S_IWUSR); + +/* + * members + */ +static ssize_t target_core_alua_tg_pt_gp_show_attr_members( + struct t10_alua_tg_pt_gp *tg_pt_gp, + char *page) +{ + struct se_port *port; + struct se_portal_group *tpg; + struct se_lun *lun; + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem; + ssize_t len = 0, cur_len; + unsigned char buf[TG_PT_GROUP_NAME_BUF]; + + memset(buf, 0, TG_PT_GROUP_NAME_BUF); + + spin_lock(&tg_pt_gp->tg_pt_gp_lock); + list_for_each_entry(tg_pt_gp_mem, &tg_pt_gp->tg_pt_gp_mem_list, + tg_pt_gp_mem_list) { + port = tg_pt_gp_mem->tg_pt; + tpg = port->sep_tpg; + lun = port->sep_lun; + + cur_len = snprintf(buf, TG_PT_GROUP_NAME_BUF, "%s/%s/tpgt_%hu" + "/%s\n", TPG_TFO(tpg)->get_fabric_name(), + TPG_TFO(tpg)->tpg_get_wwn(tpg), + TPG_TFO(tpg)->tpg_get_tag(tpg), + config_item_name(&lun->lun_group.cg_item)); + cur_len++; /* Extra byte for NULL terminator */ + + if ((cur_len + len) > PAGE_SIZE) { + printk(KERN_WARNING "Ran out of lu_gp_show_attr" + "_members buffer\n"); + break; + } + memcpy(page+len, buf, cur_len); + len += cur_len; + } + spin_unlock(&tg_pt_gp->tg_pt_gp_lock); + + return len; +} + +SE_DEV_ALUA_TG_PT_ATTR_RO(members); + +CONFIGFS_EATTR_OPS(target_core_alua_tg_pt_gp, t10_alua_tg_pt_gp, + tg_pt_gp_group); + +static struct configfs_attribute *target_core_alua_tg_pt_gp_attrs[] = { + &target_core_alua_tg_pt_gp_alua_access_state.attr, + &target_core_alua_tg_pt_gp_alua_access_status.attr, + &target_core_alua_tg_pt_gp_alua_access_type.attr, + &target_core_alua_tg_pt_gp_alua_write_metadata.attr, + &target_core_alua_tg_pt_gp_nonop_delay_msecs.attr, + &target_core_alua_tg_pt_gp_trans_delay_msecs.attr, + &target_core_alua_tg_pt_gp_preferred.attr, + &target_core_alua_tg_pt_gp_tg_pt_gp_id.attr, + &target_core_alua_tg_pt_gp_members.attr, + NULL, +}; + +static struct configfs_item_operations target_core_alua_tg_pt_gp_ops = { + .show_attribute = target_core_alua_tg_pt_gp_attr_show, + .store_attribute = target_core_alua_tg_pt_gp_attr_store, +}; + +static struct config_item_type target_core_alua_tg_pt_gp_cit = { + .ct_item_ops = &target_core_alua_tg_pt_gp_ops, + .ct_attrs = target_core_alua_tg_pt_gp_attrs, + .ct_owner = THIS_MODULE, +}; + +/* End functions for struct config_item_type target_core_alua_tg_pt_gp_cit */ + +/* Start functions for struct config_item_type target_core_alua_tg_pt_gps_cit */ + +static struct config_group *target_core_alua_create_tg_pt_gp( + struct config_group *group, + const char *name) +{ + struct t10_alua *alua = container_of(group, struct t10_alua, + alua_tg_pt_gps_group); + struct t10_alua_tg_pt_gp *tg_pt_gp; + struct se_subsystem_dev *su_dev = alua->t10_sub_dev; + struct config_group *alua_tg_pt_gp_cg = NULL; + struct config_item *alua_tg_pt_gp_ci = NULL; + + tg_pt_gp = core_alua_allocate_tg_pt_gp(su_dev, name, 0); + if (!(tg_pt_gp)) + return NULL; + + alua_tg_pt_gp_cg = &tg_pt_gp->tg_pt_gp_group; + alua_tg_pt_gp_ci = &alua_tg_pt_gp_cg->cg_item; + + config_group_init_type_name(alua_tg_pt_gp_cg, name, + &target_core_alua_tg_pt_gp_cit); + + printk(KERN_INFO "Target_Core_ConfigFS: Allocated ALUA Target Port" + " Group: alua/tg_pt_gps/%s\n", + config_item_name(alua_tg_pt_gp_ci)); + + return alua_tg_pt_gp_cg; +} + +static void target_core_alua_drop_tg_pt_gp( + struct config_group *group, + struct config_item *item) +{ + struct t10_alua_tg_pt_gp *tg_pt_gp = container_of(to_config_group(item), + struct t10_alua_tg_pt_gp, tg_pt_gp_group); + + printk(KERN_INFO "Target_Core_ConfigFS: Releasing ALUA Target Port" + " Group: alua/tg_pt_gps/%s, ID: %hu\n", + config_item_name(item), tg_pt_gp->tg_pt_gp_id); + + config_item_put(item); + core_alua_free_tg_pt_gp(tg_pt_gp); +} + +static struct configfs_group_operations target_core_alua_tg_pt_gps_group_ops = { + .make_group = &target_core_alua_create_tg_pt_gp, + .drop_item = &target_core_alua_drop_tg_pt_gp, +}; + +static struct config_item_type target_core_alua_tg_pt_gps_cit = { + .ct_group_ops = &target_core_alua_tg_pt_gps_group_ops, + .ct_owner = THIS_MODULE, +}; + +/* End functions for struct config_item_type target_core_alua_tg_pt_gps_cit */ + +/* Start functions for struct config_item_type target_core_alua_cit */ + +/* + * target_core_alua_cit is a ConfigFS group that lives under + * /sys/kernel/config/target/core/alua. There are default groups + * core/alua/lu_gps and core/alua/tg_pt_gps that are attached to + * target_core_alua_cit in target_core_init_configfs() below. + */ +static struct config_item_type target_core_alua_cit = { + .ct_item_ops = NULL, + .ct_attrs = NULL, + .ct_owner = THIS_MODULE, +}; + +/* End functions for struct config_item_type target_core_alua_cit */ + +/* Start functions for struct config_item_type target_core_hba_cit */ + +static struct config_group *target_core_make_subdev( + struct config_group *group, + const char *name) +{ + struct t10_alua_tg_pt_gp *tg_pt_gp; + struct se_subsystem_dev *se_dev; + struct se_subsystem_api *t; + struct config_item *hba_ci = &group->cg_item; + struct se_hba *hba = item_to_hba(hba_ci); + struct config_group *dev_cg = NULL, *tg_pt_gp_cg = NULL; + + if (mutex_lock_interruptible(&hba->hba_access_mutex)) + return NULL; + + /* + * Locate the struct se_subsystem_api from parent's struct se_hba. + */ + t = hba->transport; + + se_dev = kzalloc(sizeof(struct se_subsystem_dev), GFP_KERNEL); + if (!se_dev) { + printk(KERN_ERR "Unable to allocate memory for" + " struct se_subsystem_dev\n"); + goto unlock; + } + INIT_LIST_HEAD(&se_dev->g_se_dev_list); + INIT_LIST_HEAD(&se_dev->t10_wwn.t10_vpd_list); + spin_lock_init(&se_dev->t10_wwn.t10_vpd_lock); + INIT_LIST_HEAD(&se_dev->t10_reservation.registration_list); + INIT_LIST_HEAD(&se_dev->t10_reservation.aptpl_reg_list); + spin_lock_init(&se_dev->t10_reservation.registration_lock); + spin_lock_init(&se_dev->t10_reservation.aptpl_reg_lock); + INIT_LIST_HEAD(&se_dev->t10_alua.tg_pt_gps_list); + spin_lock_init(&se_dev->t10_alua.tg_pt_gps_lock); + spin_lock_init(&se_dev->se_dev_lock); + se_dev->t10_reservation.pr_aptpl_buf_len = PR_APTPL_BUF_LEN; + se_dev->t10_wwn.t10_sub_dev = se_dev; + se_dev->t10_alua.t10_sub_dev = se_dev; + se_dev->se_dev_attrib.da_sub_dev = se_dev; + + se_dev->se_dev_hba = hba; + dev_cg = &se_dev->se_dev_group; + + dev_cg->default_groups = kzalloc(sizeof(struct config_group) * 6, + GFP_KERNEL); + if (!(dev_cg->default_groups)) + goto out; + /* + * Set se_dev_su_ptr from struct se_subsystem_api returned void ptr + * for ->allocate_virtdevice() + * + * se_dev->se_dev_ptr will be set after ->create_virtdev() + * has been called successfully in the next level up in the + * configfs tree for device object's struct config_group. + */ + se_dev->se_dev_su_ptr = t->allocate_virtdevice(hba, name); + if (!(se_dev->se_dev_su_ptr)) { + printk(KERN_ERR "Unable to locate subsystem dependent pointer" + " from allocate_virtdevice()\n"); + goto out; + } + spin_lock(&se_global->g_device_lock); + list_add_tail(&se_dev->g_se_dev_list, &se_global->g_se_dev_list); + spin_unlock(&se_global->g_device_lock); + + config_group_init_type_name(&se_dev->se_dev_group, name, + &target_core_dev_cit); + config_group_init_type_name(&se_dev->se_dev_attrib.da_group, "attrib", + &target_core_dev_attrib_cit); + config_group_init_type_name(&se_dev->se_dev_pr_group, "pr", + &target_core_dev_pr_cit); + config_group_init_type_name(&se_dev->t10_wwn.t10_wwn_group, "wwn", + &target_core_dev_wwn_cit); + config_group_init_type_name(&se_dev->t10_alua.alua_tg_pt_gps_group, + "alua", &target_core_alua_tg_pt_gps_cit); + dev_cg->default_groups[0] = &se_dev->se_dev_attrib.da_group; + dev_cg->default_groups[1] = &se_dev->se_dev_pr_group; + dev_cg->default_groups[2] = &se_dev->t10_wwn.t10_wwn_group; + dev_cg->default_groups[3] = &se_dev->t10_alua.alua_tg_pt_gps_group; + dev_cg->default_groups[4] = NULL; + /* + * Add core/$HBA/$DEV/alua/tg_pt_gps/default_tg_pt_gp + */ + tg_pt_gp = core_alua_allocate_tg_pt_gp(se_dev, "default_tg_pt_gp", 1); + if (!(tg_pt_gp)) + goto out; + + tg_pt_gp_cg = &T10_ALUA(se_dev)->alua_tg_pt_gps_group; + tg_pt_gp_cg->default_groups = kzalloc(sizeof(struct config_group) * 2, + GFP_KERNEL); + if (!(tg_pt_gp_cg->default_groups)) { + printk(KERN_ERR "Unable to allocate tg_pt_gp_cg->" + "default_groups\n"); + goto out; + } + + config_group_init_type_name(&tg_pt_gp->tg_pt_gp_group, + "default_tg_pt_gp", &target_core_alua_tg_pt_gp_cit); + tg_pt_gp_cg->default_groups[0] = &tg_pt_gp->tg_pt_gp_group; + tg_pt_gp_cg->default_groups[1] = NULL; + T10_ALUA(se_dev)->default_tg_pt_gp = tg_pt_gp; + + printk(KERN_INFO "Target_Core_ConfigFS: Allocated struct se_subsystem_dev:" + " %p se_dev_su_ptr: %p\n", se_dev, se_dev->se_dev_su_ptr); + + mutex_unlock(&hba->hba_access_mutex); + return &se_dev->se_dev_group; +out: + if (T10_ALUA(se_dev)->default_tg_pt_gp) { + core_alua_free_tg_pt_gp(T10_ALUA(se_dev)->default_tg_pt_gp); + T10_ALUA(se_dev)->default_tg_pt_gp = NULL; + } + if (tg_pt_gp_cg) + kfree(tg_pt_gp_cg->default_groups); + if (dev_cg) + kfree(dev_cg->default_groups); + if (se_dev->se_dev_su_ptr) + t->free_device(se_dev->se_dev_su_ptr); + kfree(se_dev); +unlock: + mutex_unlock(&hba->hba_access_mutex); + return NULL; +} + +static void target_core_drop_subdev( + struct config_group *group, + struct config_item *item) +{ + struct se_subsystem_dev *se_dev = container_of(to_config_group(item), + struct se_subsystem_dev, se_dev_group); + struct se_hba *hba; + struct se_subsystem_api *t; + struct config_item *df_item; + struct config_group *dev_cg, *tg_pt_gp_cg; + int i, ret; + + hba = item_to_hba(&se_dev->se_dev_hba->hba_group.cg_item); + + if (mutex_lock_interruptible(&hba->hba_access_mutex)) + goto out; + + t = hba->transport; + + spin_lock(&se_global->g_device_lock); + list_del(&se_dev->g_se_dev_list); + spin_unlock(&se_global->g_device_lock); + + tg_pt_gp_cg = &T10_ALUA(se_dev)->alua_tg_pt_gps_group; + for (i = 0; tg_pt_gp_cg->default_groups[i]; i++) { + df_item = &tg_pt_gp_cg->default_groups[i]->cg_item; + tg_pt_gp_cg->default_groups[i] = NULL; + config_item_put(df_item); + } + kfree(tg_pt_gp_cg->default_groups); + core_alua_free_tg_pt_gp(T10_ALUA(se_dev)->default_tg_pt_gp); + T10_ALUA(se_dev)->default_tg_pt_gp = NULL; + + dev_cg = &se_dev->se_dev_group; + for (i = 0; dev_cg->default_groups[i]; i++) { + df_item = &dev_cg->default_groups[i]->cg_item; + dev_cg->default_groups[i] = NULL; + config_item_put(df_item); + } + + config_item_put(item); + /* + * This pointer will set when the storage is enabled with: + * `echo 1 > $CONFIGFS/core/$HBA/$DEV/dev_enable` + */ + if (se_dev->se_dev_ptr) { + printk(KERN_INFO "Target_Core_ConfigFS: Calling se_free_" + "virtual_device() for se_dev_ptr: %p\n", + se_dev->se_dev_ptr); + + ret = se_free_virtual_device(se_dev->se_dev_ptr, hba); + if (ret < 0) + goto hba_out; + } else { + /* + * Release struct se_subsystem_dev->se_dev_su_ptr.. + */ + printk(KERN_INFO "Target_Core_ConfigFS: Calling t->free_" + "device() for se_dev_su_ptr: %p\n", + se_dev->se_dev_su_ptr); + + t->free_device(se_dev->se_dev_su_ptr); + } + + printk(KERN_INFO "Target_Core_ConfigFS: Deallocating se_subsystem" + "_dev_t: %p\n", se_dev); + +hba_out: + mutex_unlock(&hba->hba_access_mutex); +out: + kfree(se_dev); +} + +static struct configfs_group_operations target_core_hba_group_ops = { + .make_group = target_core_make_subdev, + .drop_item = target_core_drop_subdev, +}; + +CONFIGFS_EATTR_STRUCT(target_core_hba, se_hba); +#define SE_HBA_ATTR(_name, _mode) \ +static struct target_core_hba_attribute \ + target_core_hba_##_name = \ + __CONFIGFS_EATTR(_name, _mode, \ + target_core_hba_show_attr_##_name, \ + target_core_hba_store_attr_##_name); + +#define SE_HBA_ATTR_RO(_name) \ +static struct target_core_hba_attribute \ + target_core_hba_##_name = \ + __CONFIGFS_EATTR_RO(_name, \ + target_core_hba_show_attr_##_name); + +static ssize_t target_core_hba_show_attr_hba_info( + struct se_hba *hba, + char *page) +{ + return sprintf(page, "HBA Index: %d plugin: %s version: %s\n", + hba->hba_id, hba->transport->name, + TARGET_CORE_CONFIGFS_VERSION); +} + +SE_HBA_ATTR_RO(hba_info); + +static ssize_t target_core_hba_show_attr_hba_mode(struct se_hba *hba, + char *page) +{ + int hba_mode = 0; + + if (hba->hba_flags & HBA_FLAGS_PSCSI_MODE) + hba_mode = 1; + + return sprintf(page, "%d\n", hba_mode); +} + +static ssize_t target_core_hba_store_attr_hba_mode(struct se_hba *hba, + const char *page, size_t count) +{ + struct se_subsystem_api *transport = hba->transport; + unsigned long mode_flag; + int ret; + + if (transport->pmode_enable_hba == NULL) + return -EINVAL; + + ret = strict_strtoul(page, 0, &mode_flag); + if (ret < 0) { + printk(KERN_ERR "Unable to extract hba mode flag: %d\n", ret); + return -EINVAL; + } + + spin_lock(&hba->device_lock); + if (!(list_empty(&hba->hba_dev_list))) { + printk(KERN_ERR "Unable to set hba_mode with active devices\n"); + spin_unlock(&hba->device_lock); + return -EINVAL; + } + spin_unlock(&hba->device_lock); + + ret = transport->pmode_enable_hba(hba, mode_flag); + if (ret < 0) + return -EINVAL; + if (ret > 0) + hba->hba_flags |= HBA_FLAGS_PSCSI_MODE; + else if (ret == 0) + hba->hba_flags &= ~HBA_FLAGS_PSCSI_MODE; + + return count; +} + +SE_HBA_ATTR(hba_mode, S_IRUGO | S_IWUSR); + +CONFIGFS_EATTR_OPS(target_core_hba, se_hba, hba_group); + +static struct configfs_attribute *target_core_hba_attrs[] = { + &target_core_hba_hba_info.attr, + &target_core_hba_hba_mode.attr, + NULL, +}; + +static struct configfs_item_operations target_core_hba_item_ops = { + .show_attribute = target_core_hba_attr_show, + .store_attribute = target_core_hba_attr_store, +}; + +static struct config_item_type target_core_hba_cit = { + .ct_item_ops = &target_core_hba_item_ops, + .ct_group_ops = &target_core_hba_group_ops, + .ct_attrs = target_core_hba_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct config_group *target_core_call_addhbatotarget( + struct config_group *group, + const char *name) +{ + char *se_plugin_str, *str, *str2; + struct se_hba *hba; + char buf[TARGET_CORE_NAME_MAX_LEN]; + unsigned long plugin_dep_id = 0; + int ret; + + memset(buf, 0, TARGET_CORE_NAME_MAX_LEN); + if (strlen(name) > TARGET_CORE_NAME_MAX_LEN) { + printk(KERN_ERR "Passed *name strlen(): %d exceeds" + " TARGET_CORE_NAME_MAX_LEN: %d\n", (int)strlen(name), + TARGET_CORE_NAME_MAX_LEN); + return ERR_PTR(-ENAMETOOLONG); + } + snprintf(buf, TARGET_CORE_NAME_MAX_LEN, "%s", name); + + str = strstr(buf, "_"); + if (!(str)) { + printk(KERN_ERR "Unable to locate \"_\" for $SUBSYSTEM_PLUGIN_$HOST_ID\n"); + return ERR_PTR(-EINVAL); + } + se_plugin_str = buf; + /* + * Special case for subsystem plugins that have "_" in their names. + * Namely rd_direct and rd_mcp.. + */ + str2 = strstr(str+1, "_"); + if ((str2)) { + *str2 = '\0'; /* Terminate for *se_plugin_str */ + str2++; /* Skip to start of plugin dependent ID */ + str = str2; + } else { + *str = '\0'; /* Terminate for *se_plugin_str */ + str++; /* Skip to start of plugin dependent ID */ + } + + ret = strict_strtoul(str, 0, &plugin_dep_id); + if (ret < 0) { + printk(KERN_ERR "strict_strtoul() returned %d for" + " plugin_dep_id\n", ret); + return ERR_PTR(-EINVAL); + } + /* + * Load up TCM subsystem plugins if they have not already been loaded. + */ + if (transport_subsystem_check_init() < 0) + return ERR_PTR(-EINVAL); + + hba = core_alloc_hba(se_plugin_str, plugin_dep_id, 0); + if (IS_ERR(hba)) + return ERR_CAST(hba); + + config_group_init_type_name(&hba->hba_group, name, + &target_core_hba_cit); + + return &hba->hba_group; +} + +static void target_core_call_delhbafromtarget( + struct config_group *group, + struct config_item *item) +{ + struct se_hba *hba = item_to_hba(item); + + config_item_put(item); + core_delete_hba(hba); +} + +static struct configfs_group_operations target_core_group_ops = { + .make_group = target_core_call_addhbatotarget, + .drop_item = target_core_call_delhbafromtarget, +}; + +static struct config_item_type target_core_cit = { + .ct_item_ops = NULL, + .ct_group_ops = &target_core_group_ops, + .ct_attrs = NULL, + .ct_owner = THIS_MODULE, +}; + +/* Stop functions for struct config_item_type target_core_hba_cit */ + +static int target_core_init_configfs(void) +{ + struct config_group *target_cg, *hba_cg = NULL, *alua_cg = NULL; + struct config_group *lu_gp_cg = NULL; + struct configfs_subsystem *subsys; + struct proc_dir_entry *scsi_target_proc = NULL; + struct t10_alua_lu_gp *lu_gp; + int ret; + + printk(KERN_INFO "TARGET_CORE[0]: Loading Generic Kernel Storage" + " Engine: %s on %s/%s on "UTS_RELEASE"\n", + TARGET_CORE_VERSION, utsname()->sysname, utsname()->machine); + + subsys = target_core_subsystem[0]; + config_group_init(&subsys->su_group); + mutex_init(&subsys->su_mutex); + + INIT_LIST_HEAD(&g_tf_list); + mutex_init(&g_tf_lock); + init_scsi_index_table(); + ret = init_se_global(); + if (ret < 0) + return -1; + /* + * Create $CONFIGFS/target/core default group for HBA <-> Storage Object + * and ALUA Logical Unit Group and Target Port Group infrastructure. + */ + target_cg = &subsys->su_group; + target_cg->default_groups = kzalloc(sizeof(struct config_group) * 2, + GFP_KERNEL); + if (!(target_cg->default_groups)) { + printk(KERN_ERR "Unable to allocate target_cg->default_groups\n"); + goto out_global; + } + + config_group_init_type_name(&se_global->target_core_hbagroup, + "core", &target_core_cit); + target_cg->default_groups[0] = &se_global->target_core_hbagroup; + target_cg->default_groups[1] = NULL; + /* + * Create ALUA infrastructure under /sys/kernel/config/target/core/alua/ + */ + hba_cg = &se_global->target_core_hbagroup; + hba_cg->default_groups = kzalloc(sizeof(struct config_group) * 2, + GFP_KERNEL); + if (!(hba_cg->default_groups)) { + printk(KERN_ERR "Unable to allocate hba_cg->default_groups\n"); + goto out_global; + } + config_group_init_type_name(&se_global->alua_group, + "alua", &target_core_alua_cit); + hba_cg->default_groups[0] = &se_global->alua_group; + hba_cg->default_groups[1] = NULL; + /* + * Add ALUA Logical Unit Group and Target Port Group ConfigFS + * groups under /sys/kernel/config/target/core/alua/ + */ + alua_cg = &se_global->alua_group; + alua_cg->default_groups = kzalloc(sizeof(struct config_group) * 2, + GFP_KERNEL); + if (!(alua_cg->default_groups)) { + printk(KERN_ERR "Unable to allocate alua_cg->default_groups\n"); + goto out_global; + } + + config_group_init_type_name(&se_global->alua_lu_gps_group, + "lu_gps", &target_core_alua_lu_gps_cit); + alua_cg->default_groups[0] = &se_global->alua_lu_gps_group; + alua_cg->default_groups[1] = NULL; + /* + * Add core/alua/lu_gps/default_lu_gp + */ + lu_gp = core_alua_allocate_lu_gp("default_lu_gp", 1); + if (IS_ERR(lu_gp)) + goto out_global; + + lu_gp_cg = &se_global->alua_lu_gps_group; + lu_gp_cg->default_groups = kzalloc(sizeof(struct config_group) * 2, + GFP_KERNEL); + if (!(lu_gp_cg->default_groups)) { + printk(KERN_ERR "Unable to allocate lu_gp_cg->default_groups\n"); + goto out_global; + } + + config_group_init_type_name(&lu_gp->lu_gp_group, "default_lu_gp", + &target_core_alua_lu_gp_cit); + lu_gp_cg->default_groups[0] = &lu_gp->lu_gp_group; + lu_gp_cg->default_groups[1] = NULL; + se_global->default_lu_gp = lu_gp; + /* + * Register the target_core_mod subsystem with configfs. + */ + ret = configfs_register_subsystem(subsys); + if (ret < 0) { + printk(KERN_ERR "Error %d while registering subsystem %s\n", + ret, subsys->su_group.cg_item.ci_namebuf); + goto out_global; + } + printk(KERN_INFO "TARGET_CORE[0]: Initialized ConfigFS Fabric" + " Infrastructure: "TARGET_CORE_CONFIGFS_VERSION" on %s/%s" + " on "UTS_RELEASE"\n", utsname()->sysname, utsname()->machine); + /* + * Register built-in RAMDISK subsystem logic for virtual LUN 0 + */ + ret = rd_module_init(); + if (ret < 0) + goto out; + + if (core_dev_setup_virtual_lun0() < 0) + goto out; + + scsi_target_proc = proc_mkdir("scsi_target", 0); + if (!(scsi_target_proc)) { + printk(KERN_ERR "proc_mkdir(scsi_target, 0) failed\n"); + goto out; + } + ret = init_scsi_target_mib(); + if (ret < 0) + goto out; + + return 0; + +out: + configfs_unregister_subsystem(subsys); + if (scsi_target_proc) + remove_proc_entry("scsi_target", 0); + core_dev_release_virtual_lun0(); + rd_module_exit(); +out_global: + if (se_global->default_lu_gp) { + core_alua_free_lu_gp(se_global->default_lu_gp); + se_global->default_lu_gp = NULL; + } + if (lu_gp_cg) + kfree(lu_gp_cg->default_groups); + if (alua_cg) + kfree(alua_cg->default_groups); + if (hba_cg) + kfree(hba_cg->default_groups); + kfree(target_cg->default_groups); + release_se_global(); + return -1; +} + +static void target_core_exit_configfs(void) +{ + struct configfs_subsystem *subsys; + struct config_group *hba_cg, *alua_cg, *lu_gp_cg; + struct config_item *item; + int i; + + se_global->in_shutdown = 1; + subsys = target_core_subsystem[0]; + + lu_gp_cg = &se_global->alua_lu_gps_group; + for (i = 0; lu_gp_cg->default_groups[i]; i++) { + item = &lu_gp_cg->default_groups[i]->cg_item; + lu_gp_cg->default_groups[i] = NULL; + config_item_put(item); + } + kfree(lu_gp_cg->default_groups); + core_alua_free_lu_gp(se_global->default_lu_gp); + se_global->default_lu_gp = NULL; + + alua_cg = &se_global->alua_group; + for (i = 0; alua_cg->default_groups[i]; i++) { + item = &alua_cg->default_groups[i]->cg_item; + alua_cg->default_groups[i] = NULL; + config_item_put(item); + } + kfree(alua_cg->default_groups); + + hba_cg = &se_global->target_core_hbagroup; + for (i = 0; hba_cg->default_groups[i]; i++) { + item = &hba_cg->default_groups[i]->cg_item; + hba_cg->default_groups[i] = NULL; + config_item_put(item); + } + kfree(hba_cg->default_groups); + + for (i = 0; subsys->su_group.default_groups[i]; i++) { + item = &subsys->su_group.default_groups[i]->cg_item; + subsys->su_group.default_groups[i] = NULL; + config_item_put(item); + } + kfree(subsys->su_group.default_groups); + + configfs_unregister_subsystem(subsys); + printk(KERN_INFO "TARGET_CORE[0]: Released ConfigFS Fabric" + " Infrastructure\n"); + + remove_scsi_target_mib(); + remove_proc_entry("scsi_target", 0); + core_dev_release_virtual_lun0(); + rd_module_exit(); + release_se_global(); + + return; +} + +MODULE_DESCRIPTION("Target_Core_Mod/ConfigFS"); +MODULE_AUTHOR("nab@Linux-iSCSI.org"); +MODULE_LICENSE("GPL"); + +module_init(target_core_init_configfs); +module_exit(target_core_exit_configfs); diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c new file mode 100644 index 000000000000..317ce58d426d --- /dev/null +++ b/drivers/target/target_core_device.c @@ -0,0 +1,1694 @@ +/******************************************************************************* + * Filename: target_core_device.c (based on iscsi_target_device.c) + * + * This file contains the iSCSI Virtual Device and Disk Transport + * agnostic related functions. + * + * Copyright (c) 2003, 2004, 2005 PyX Technologies, Inc. + * Copyright (c) 2005-2006 SBE, Inc. All Rights Reserved. + * Copyright (c) 2007-2010 Rising Tide Systems + * Copyright (c) 2008-2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ******************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "target_core_alua.h" +#include "target_core_hba.h" +#include "target_core_pr.h" +#include "target_core_ua.h" + +static void se_dev_start(struct se_device *dev); +static void se_dev_stop(struct se_device *dev); + +int transport_get_lun_for_cmd( + struct se_cmd *se_cmd, + unsigned char *cdb, + u32 unpacked_lun) +{ + struct se_dev_entry *deve; + struct se_lun *se_lun = NULL; + struct se_session *se_sess = SE_SESS(se_cmd); + unsigned long flags; + int read_only = 0; + + spin_lock_irq(&SE_NODE_ACL(se_sess)->device_list_lock); + deve = se_cmd->se_deve = + &SE_NODE_ACL(se_sess)->device_list[unpacked_lun]; + if (deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS) { + if (se_cmd) { + deve->total_cmds++; + deve->total_bytes += se_cmd->data_length; + + if (se_cmd->data_direction == DMA_TO_DEVICE) { + if (deve->lun_flags & + TRANSPORT_LUNFLAGS_READ_ONLY) { + read_only = 1; + goto out; + } + deve->write_bytes += se_cmd->data_length; + } else if (se_cmd->data_direction == + DMA_FROM_DEVICE) { + deve->read_bytes += se_cmd->data_length; + } + } + deve->deve_cmds++; + + se_lun = se_cmd->se_lun = deve->se_lun; + se_cmd->pr_res_key = deve->pr_res_key; + se_cmd->orig_fe_lun = unpacked_lun; + se_cmd->se_orig_obj_ptr = SE_LUN(se_cmd)->lun_se_dev; + se_cmd->se_cmd_flags |= SCF_SE_LUN_CMD; + } +out: + spin_unlock_irq(&SE_NODE_ACL(se_sess)->device_list_lock); + + if (!se_lun) { + if (read_only) { + se_cmd->scsi_sense_reason = TCM_WRITE_PROTECTED; + se_cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + printk("TARGET_CORE[%s]: Detected WRITE_PROTECTED LUN" + " Access for 0x%08x\n", + CMD_TFO(se_cmd)->get_fabric_name(), + unpacked_lun); + return -1; + } else { + /* + * Use the se_portal_group->tpg_virt_lun0 to allow for + * REPORT_LUNS, et al to be returned when no active + * MappedLUN=0 exists for this Initiator Port. + */ + if (unpacked_lun != 0) { + se_cmd->scsi_sense_reason = TCM_NON_EXISTENT_LUN; + se_cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + printk("TARGET_CORE[%s]: Detected NON_EXISTENT_LUN" + " Access for 0x%08x\n", + CMD_TFO(se_cmd)->get_fabric_name(), + unpacked_lun); + return -1; + } + /* + * Force WRITE PROTECT for virtual LUN 0 + */ + if ((se_cmd->data_direction != DMA_FROM_DEVICE) && + (se_cmd->data_direction != DMA_NONE)) { + se_cmd->scsi_sense_reason = TCM_WRITE_PROTECTED; + se_cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + return -1; + } +#if 0 + printk("TARGET_CORE[%s]: Using virtual LUN0! :-)\n", + CMD_TFO(se_cmd)->get_fabric_name()); +#endif + se_lun = se_cmd->se_lun = &se_sess->se_tpg->tpg_virt_lun0; + se_cmd->orig_fe_lun = 0; + se_cmd->se_orig_obj_ptr = SE_LUN(se_cmd)->lun_se_dev; + se_cmd->se_cmd_flags |= SCF_SE_LUN_CMD; + } + } + /* + * Determine if the struct se_lun is online. + */ +/* #warning FIXME: Check for LUN_RESET + UNIT Attention */ + if (se_dev_check_online(se_lun->lun_se_dev) != 0) { + se_cmd->scsi_sense_reason = TCM_NON_EXISTENT_LUN; + se_cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + return -1; + } + + { + struct se_device *dev = se_lun->lun_se_dev; + spin_lock(&dev->stats_lock); + dev->num_cmds++; + if (se_cmd->data_direction == DMA_TO_DEVICE) + dev->write_bytes += se_cmd->data_length; + else if (se_cmd->data_direction == DMA_FROM_DEVICE) + dev->read_bytes += se_cmd->data_length; + spin_unlock(&dev->stats_lock); + } + + /* + * Add the iscsi_cmd_t to the struct se_lun's cmd list. This list is used + * for tracking state of struct se_cmds during LUN shutdown events. + */ + spin_lock_irqsave(&se_lun->lun_cmd_lock, flags); + list_add_tail(&se_cmd->se_lun_list, &se_lun->lun_cmd_list); + atomic_set(&T_TASK(se_cmd)->transport_lun_active, 1); +#if 0 + printk(KERN_INFO "Adding ITT: 0x%08x to LUN LIST[%d]\n", + CMD_TFO(se_cmd)->get_task_tag(se_cmd), se_lun->unpacked_lun); +#endif + spin_unlock_irqrestore(&se_lun->lun_cmd_lock, flags); + + return 0; +} +EXPORT_SYMBOL(transport_get_lun_for_cmd); + +int transport_get_lun_for_tmr( + struct se_cmd *se_cmd, + u32 unpacked_lun) +{ + struct se_device *dev = NULL; + struct se_dev_entry *deve; + struct se_lun *se_lun = NULL; + struct se_session *se_sess = SE_SESS(se_cmd); + struct se_tmr_req *se_tmr = se_cmd->se_tmr_req; + + spin_lock_irq(&SE_NODE_ACL(se_sess)->device_list_lock); + deve = se_cmd->se_deve = + &SE_NODE_ACL(se_sess)->device_list[unpacked_lun]; + if (deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS) { + se_lun = se_cmd->se_lun = se_tmr->tmr_lun = deve->se_lun; + dev = se_tmr->tmr_dev = se_lun->lun_se_dev; + se_cmd->pr_res_key = deve->pr_res_key; + se_cmd->orig_fe_lun = unpacked_lun; + se_cmd->se_orig_obj_ptr = SE_LUN(se_cmd)->lun_se_dev; +/* se_cmd->se_cmd_flags |= SCF_SE_LUN_CMD; */ + } + spin_unlock_irq(&SE_NODE_ACL(se_sess)->device_list_lock); + + if (!se_lun) { + printk(KERN_INFO "TARGET_CORE[%s]: Detected NON_EXISTENT_LUN" + " Access for 0x%08x\n", + CMD_TFO(se_cmd)->get_fabric_name(), + unpacked_lun); + se_cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + return -1; + } + /* + * Determine if the struct se_lun is online. + */ +/* #warning FIXME: Check for LUN_RESET + UNIT Attention */ + if (se_dev_check_online(se_lun->lun_se_dev) != 0) { + se_cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + return -1; + } + + spin_lock(&dev->se_tmr_lock); + list_add_tail(&se_tmr->tmr_list, &dev->dev_tmr_list); + spin_unlock(&dev->se_tmr_lock); + + return 0; +} +EXPORT_SYMBOL(transport_get_lun_for_tmr); + +/* + * This function is called from core_scsi3_emulate_pro_register_and_move() + * and core_scsi3_decode_spec_i_port(), and will increment &deve->pr_ref_count + * when a matching rtpi is found. + */ +struct se_dev_entry *core_get_se_deve_from_rtpi( + struct se_node_acl *nacl, + u16 rtpi) +{ + struct se_dev_entry *deve; + struct se_lun *lun; + struct se_port *port; + struct se_portal_group *tpg = nacl->se_tpg; + u32 i; + + spin_lock_irq(&nacl->device_list_lock); + for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) { + deve = &nacl->device_list[i]; + + if (!(deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS)) + continue; + + lun = deve->se_lun; + if (!(lun)) { + printk(KERN_ERR "%s device entries device pointer is" + " NULL, but Initiator has access.\n", + TPG_TFO(tpg)->get_fabric_name()); + continue; + } + port = lun->lun_sep; + if (!(port)) { + printk(KERN_ERR "%s device entries device pointer is" + " NULL, but Initiator has access.\n", + TPG_TFO(tpg)->get_fabric_name()); + continue; + } + if (port->sep_rtpi != rtpi) + continue; + + atomic_inc(&deve->pr_ref_count); + smp_mb__after_atomic_inc(); + spin_unlock_irq(&nacl->device_list_lock); + + return deve; + } + spin_unlock_irq(&nacl->device_list_lock); + + return NULL; +} + +int core_free_device_list_for_node( + struct se_node_acl *nacl, + struct se_portal_group *tpg) +{ + struct se_dev_entry *deve; + struct se_lun *lun; + u32 i; + + if (!nacl->device_list) + return 0; + + spin_lock_irq(&nacl->device_list_lock); + for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) { + deve = &nacl->device_list[i]; + + if (!(deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS)) + continue; + + if (!deve->se_lun) { + printk(KERN_ERR "%s device entries device pointer is" + " NULL, but Initiator has access.\n", + TPG_TFO(tpg)->get_fabric_name()); + continue; + } + lun = deve->se_lun; + + spin_unlock_irq(&nacl->device_list_lock); + core_update_device_list_for_node(lun, NULL, deve->mapped_lun, + TRANSPORT_LUNFLAGS_NO_ACCESS, nacl, tpg, 0); + spin_lock_irq(&nacl->device_list_lock); + } + spin_unlock_irq(&nacl->device_list_lock); + + kfree(nacl->device_list); + nacl->device_list = NULL; + + return 0; +} + +void core_dec_lacl_count(struct se_node_acl *se_nacl, struct se_cmd *se_cmd) +{ + struct se_dev_entry *deve; + + spin_lock_irq(&se_nacl->device_list_lock); + deve = &se_nacl->device_list[se_cmd->orig_fe_lun]; + deve->deve_cmds--; + spin_unlock_irq(&se_nacl->device_list_lock); + + return; +} + +void core_update_device_list_access( + u32 mapped_lun, + u32 lun_access, + struct se_node_acl *nacl) +{ + struct se_dev_entry *deve; + + spin_lock_irq(&nacl->device_list_lock); + deve = &nacl->device_list[mapped_lun]; + if (lun_access & TRANSPORT_LUNFLAGS_READ_WRITE) { + deve->lun_flags &= ~TRANSPORT_LUNFLAGS_READ_ONLY; + deve->lun_flags |= TRANSPORT_LUNFLAGS_READ_WRITE; + } else { + deve->lun_flags &= ~TRANSPORT_LUNFLAGS_READ_WRITE; + deve->lun_flags |= TRANSPORT_LUNFLAGS_READ_ONLY; + } + spin_unlock_irq(&nacl->device_list_lock); + + return; +} + +/* core_update_device_list_for_node(): + * + * + */ +int core_update_device_list_for_node( + struct se_lun *lun, + struct se_lun_acl *lun_acl, + u32 mapped_lun, + u32 lun_access, + struct se_node_acl *nacl, + struct se_portal_group *tpg, + int enable) +{ + struct se_port *port = lun->lun_sep; + struct se_dev_entry *deve = &nacl->device_list[mapped_lun]; + int trans = 0; + /* + * If the MappedLUN entry is being disabled, the entry in + * port->sep_alua_list must be removed now before clearing the + * struct se_dev_entry pointers below as logic in + * core_alua_do_transition_tg_pt() depends on these being present. + */ + if (!(enable)) { + /* + * deve->se_lun_acl will be NULL for demo-mode created LUNs + * that have not been explictly concerted to MappedLUNs -> + * struct se_lun_acl. + */ + if (!(deve->se_lun_acl)) + return 0; + + spin_lock_bh(&port->sep_alua_lock); + list_del(&deve->alua_port_list); + spin_unlock_bh(&port->sep_alua_lock); + } + + spin_lock_irq(&nacl->device_list_lock); + if (enable) { + /* + * Check if the call is handling demo mode -> explict LUN ACL + * transition. This transition must be for the same struct se_lun + * + mapped_lun that was setup in demo mode.. + */ + if (deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS) { + if (deve->se_lun_acl != NULL) { + printk(KERN_ERR "struct se_dev_entry->se_lun_acl" + " already set for demo mode -> explict" + " LUN ACL transition\n"); + return -1; + } + if (deve->se_lun != lun) { + printk(KERN_ERR "struct se_dev_entry->se_lun does" + " match passed struct se_lun for demo mode" + " -> explict LUN ACL transition\n"); + return -1; + } + deve->se_lun_acl = lun_acl; + trans = 1; + } else { + deve->se_lun = lun; + deve->se_lun_acl = lun_acl; + deve->mapped_lun = mapped_lun; + deve->lun_flags |= TRANSPORT_LUNFLAGS_INITIATOR_ACCESS; + } + + if (lun_access & TRANSPORT_LUNFLAGS_READ_WRITE) { + deve->lun_flags &= ~TRANSPORT_LUNFLAGS_READ_ONLY; + deve->lun_flags |= TRANSPORT_LUNFLAGS_READ_WRITE; + } else { + deve->lun_flags &= ~TRANSPORT_LUNFLAGS_READ_WRITE; + deve->lun_flags |= TRANSPORT_LUNFLAGS_READ_ONLY; + } + + if (trans) { + spin_unlock_irq(&nacl->device_list_lock); + return 0; + } + deve->creation_time = get_jiffies_64(); + deve->attach_count++; + spin_unlock_irq(&nacl->device_list_lock); + + spin_lock_bh(&port->sep_alua_lock); + list_add_tail(&deve->alua_port_list, &port->sep_alua_list); + spin_unlock_bh(&port->sep_alua_lock); + + return 0; + } + /* + * Wait for any in process SPEC_I_PT=1 or REGISTER_AND_MOVE + * PR operation to complete. + */ + spin_unlock_irq(&nacl->device_list_lock); + while (atomic_read(&deve->pr_ref_count) != 0) + cpu_relax(); + spin_lock_irq(&nacl->device_list_lock); + /* + * Disable struct se_dev_entry LUN ACL mapping + */ + core_scsi3_ua_release_all(deve); + deve->se_lun = NULL; + deve->se_lun_acl = NULL; + deve->lun_flags = 0; + deve->creation_time = 0; + deve->attach_count--; + spin_unlock_irq(&nacl->device_list_lock); + + core_scsi3_free_pr_reg_from_nacl(lun->lun_se_dev, nacl); + return 0; +} + +/* core_clear_lun_from_tpg(): + * + * + */ +void core_clear_lun_from_tpg(struct se_lun *lun, struct se_portal_group *tpg) +{ + struct se_node_acl *nacl; + struct se_dev_entry *deve; + u32 i; + + spin_lock_bh(&tpg->acl_node_lock); + list_for_each_entry(nacl, &tpg->acl_node_list, acl_list) { + spin_unlock_bh(&tpg->acl_node_lock); + + spin_lock_irq(&nacl->device_list_lock); + for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) { + deve = &nacl->device_list[i]; + if (lun != deve->se_lun) + continue; + spin_unlock_irq(&nacl->device_list_lock); + + core_update_device_list_for_node(lun, NULL, + deve->mapped_lun, TRANSPORT_LUNFLAGS_NO_ACCESS, + nacl, tpg, 0); + + spin_lock_irq(&nacl->device_list_lock); + } + spin_unlock_irq(&nacl->device_list_lock); + + spin_lock_bh(&tpg->acl_node_lock); + } + spin_unlock_bh(&tpg->acl_node_lock); + + return; +} + +static struct se_port *core_alloc_port(struct se_device *dev) +{ + struct se_port *port, *port_tmp; + + port = kzalloc(sizeof(struct se_port), GFP_KERNEL); + if (!(port)) { + printk(KERN_ERR "Unable to allocate struct se_port\n"); + return NULL; + } + INIT_LIST_HEAD(&port->sep_alua_list); + INIT_LIST_HEAD(&port->sep_list); + atomic_set(&port->sep_tg_pt_secondary_offline, 0); + spin_lock_init(&port->sep_alua_lock); + mutex_init(&port->sep_tg_pt_md_mutex); + + spin_lock(&dev->se_port_lock); + if (dev->dev_port_count == 0x0000ffff) { + printk(KERN_WARNING "Reached dev->dev_port_count ==" + " 0x0000ffff\n"); + spin_unlock(&dev->se_port_lock); + return NULL; + } +again: + /* + * Allocate the next RELATIVE TARGET PORT IDENTIFER for this struct se_device + * Here is the table from spc4r17 section 7.7.3.8. + * + * Table 473 -- RELATIVE TARGET PORT IDENTIFIER field + * + * Code Description + * 0h Reserved + * 1h Relative port 1, historically known as port A + * 2h Relative port 2, historically known as port B + * 3h to FFFFh Relative port 3 through 65 535 + */ + port->sep_rtpi = dev->dev_rpti_counter++; + if (!(port->sep_rtpi)) + goto again; + + list_for_each_entry(port_tmp, &dev->dev_sep_list, sep_list) { + /* + * Make sure RELATIVE TARGET PORT IDENTIFER is unique + * for 16-bit wrap.. + */ + if (port->sep_rtpi == port_tmp->sep_rtpi) + goto again; + } + spin_unlock(&dev->se_port_lock); + + return port; +} + +static void core_export_port( + struct se_device *dev, + struct se_portal_group *tpg, + struct se_port *port, + struct se_lun *lun) +{ + struct se_subsystem_dev *su_dev = SU_DEV(dev); + struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem = NULL; + + spin_lock(&dev->se_port_lock); + spin_lock(&lun->lun_sep_lock); + port->sep_tpg = tpg; + port->sep_lun = lun; + lun->lun_sep = port; + spin_unlock(&lun->lun_sep_lock); + + list_add_tail(&port->sep_list, &dev->dev_sep_list); + spin_unlock(&dev->se_port_lock); + + if (T10_ALUA(su_dev)->alua_type == SPC3_ALUA_EMULATED) { + tg_pt_gp_mem = core_alua_allocate_tg_pt_gp_mem(port); + if (IS_ERR(tg_pt_gp_mem) || !tg_pt_gp_mem) { + printk(KERN_ERR "Unable to allocate t10_alua_tg_pt" + "_gp_member_t\n"); + return; + } + spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + __core_alua_attach_tg_pt_gp_mem(tg_pt_gp_mem, + T10_ALUA(su_dev)->default_tg_pt_gp); + spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock); + printk(KERN_INFO "%s/%s: Adding to default ALUA Target Port" + " Group: alua/default_tg_pt_gp\n", + TRANSPORT(dev)->name, TPG_TFO(tpg)->get_fabric_name()); + } + + dev->dev_port_count++; + port->sep_index = port->sep_rtpi; /* RELATIVE TARGET PORT IDENTIFER */ +} + +/* + * Called with struct se_device->se_port_lock spinlock held. + */ +static void core_release_port(struct se_device *dev, struct se_port *port) +{ + /* + * Wait for any port reference for PR ALL_TG_PT=1 operation + * to complete in __core_scsi3_alloc_registration() + */ + spin_unlock(&dev->se_port_lock); + if (atomic_read(&port->sep_tg_pt_ref_cnt)) + cpu_relax(); + spin_lock(&dev->se_port_lock); + + core_alua_free_tg_pt_gp_mem(port); + + list_del(&port->sep_list); + dev->dev_port_count--; + kfree(port); + + return; +} + +int core_dev_export( + struct se_device *dev, + struct se_portal_group *tpg, + struct se_lun *lun) +{ + struct se_port *port; + + port = core_alloc_port(dev); + if (!(port)) + return -1; + + lun->lun_se_dev = dev; + se_dev_start(dev); + + atomic_inc(&dev->dev_export_obj.obj_access_count); + core_export_port(dev, tpg, port, lun); + return 0; +} + +void core_dev_unexport( + struct se_device *dev, + struct se_portal_group *tpg, + struct se_lun *lun) +{ + struct se_port *port = lun->lun_sep; + + spin_lock(&lun->lun_sep_lock); + if (lun->lun_se_dev == NULL) { + spin_unlock(&lun->lun_sep_lock); + return; + } + spin_unlock(&lun->lun_sep_lock); + + spin_lock(&dev->se_port_lock); + atomic_dec(&dev->dev_export_obj.obj_access_count); + core_release_port(dev, port); + spin_unlock(&dev->se_port_lock); + + se_dev_stop(dev); + lun->lun_se_dev = NULL; +} + +int transport_core_report_lun_response(struct se_cmd *se_cmd) +{ + struct se_dev_entry *deve; + struct se_lun *se_lun; + struct se_session *se_sess = SE_SESS(se_cmd); + struct se_task *se_task; + unsigned char *buf = (unsigned char *)T_TASK(se_cmd)->t_task_buf; + u32 cdb_offset = 0, lun_count = 0, offset = 8; + u64 i, lun; + + list_for_each_entry(se_task, &T_TASK(se_cmd)->t_task_list, t_list) + break; + + if (!(se_task)) { + printk(KERN_ERR "Unable to locate struct se_task for struct se_cmd\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + + /* + * If no struct se_session pointer is present, this struct se_cmd is + * coming via a target_core_mod PASSTHROUGH op, and not through + * a $FABRIC_MOD. In that case, report LUN=0 only. + */ + if (!(se_sess)) { + lun = 0; + buf[offset++] = ((lun >> 56) & 0xff); + buf[offset++] = ((lun >> 48) & 0xff); + buf[offset++] = ((lun >> 40) & 0xff); + buf[offset++] = ((lun >> 32) & 0xff); + buf[offset++] = ((lun >> 24) & 0xff); + buf[offset++] = ((lun >> 16) & 0xff); + buf[offset++] = ((lun >> 8) & 0xff); + buf[offset++] = (lun & 0xff); + lun_count = 1; + goto done; + } + + spin_lock_irq(&SE_NODE_ACL(se_sess)->device_list_lock); + for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) { + deve = &SE_NODE_ACL(se_sess)->device_list[i]; + if (!(deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS)) + continue; + se_lun = deve->se_lun; + /* + * We determine the correct LUN LIST LENGTH even once we + * have reached the initial allocation length. + * See SPC2-R20 7.19. + */ + lun_count++; + if ((cdb_offset + 8) >= se_cmd->data_length) + continue; + + lun = cpu_to_be64(CMD_TFO(se_cmd)->pack_lun(deve->mapped_lun)); + buf[offset++] = ((lun >> 56) & 0xff); + buf[offset++] = ((lun >> 48) & 0xff); + buf[offset++] = ((lun >> 40) & 0xff); + buf[offset++] = ((lun >> 32) & 0xff); + buf[offset++] = ((lun >> 24) & 0xff); + buf[offset++] = ((lun >> 16) & 0xff); + buf[offset++] = ((lun >> 8) & 0xff); + buf[offset++] = (lun & 0xff); + cdb_offset += 8; + } + spin_unlock_irq(&SE_NODE_ACL(se_sess)->device_list_lock); + + /* + * See SPC3 r07, page 159. + */ +done: + lun_count *= 8; + buf[0] = ((lun_count >> 24) & 0xff); + buf[1] = ((lun_count >> 16) & 0xff); + buf[2] = ((lun_count >> 8) & 0xff); + buf[3] = (lun_count & 0xff); + + return PYX_TRANSPORT_SENT_TO_TRANSPORT; +} + +/* se_release_device_for_hba(): + * + * + */ +void se_release_device_for_hba(struct se_device *dev) +{ + struct se_hba *hba = dev->se_hba; + + if ((dev->dev_status & TRANSPORT_DEVICE_ACTIVATED) || + (dev->dev_status & TRANSPORT_DEVICE_DEACTIVATED) || + (dev->dev_status & TRANSPORT_DEVICE_SHUTDOWN) || + (dev->dev_status & TRANSPORT_DEVICE_OFFLINE_ACTIVATED) || + (dev->dev_status & TRANSPORT_DEVICE_OFFLINE_DEACTIVATED)) + se_dev_stop(dev); + + if (dev->dev_ptr) { + kthread_stop(dev->process_thread); + if (dev->transport->free_device) + dev->transport->free_device(dev->dev_ptr); + } + + spin_lock(&hba->device_lock); + list_del(&dev->dev_list); + hba->dev_count--; + spin_unlock(&hba->device_lock); + + core_scsi3_free_all_registrations(dev); + se_release_vpd_for_dev(dev); + + kfree(dev->dev_status_queue_obj); + kfree(dev->dev_queue_obj); + kfree(dev); + + return; +} + +void se_release_vpd_for_dev(struct se_device *dev) +{ + struct t10_vpd *vpd, *vpd_tmp; + + spin_lock(&DEV_T10_WWN(dev)->t10_vpd_lock); + list_for_each_entry_safe(vpd, vpd_tmp, + &DEV_T10_WWN(dev)->t10_vpd_list, vpd_list) { + list_del(&vpd->vpd_list); + kfree(vpd); + } + spin_unlock(&DEV_T10_WWN(dev)->t10_vpd_lock); + + return; +} + +/* + * Called with struct se_hba->device_lock held. + */ +void se_clear_dev_ports(struct se_device *dev) +{ + struct se_hba *hba = dev->se_hba; + struct se_lun *lun; + struct se_portal_group *tpg; + struct se_port *sep, *sep_tmp; + + spin_lock(&dev->se_port_lock); + list_for_each_entry_safe(sep, sep_tmp, &dev->dev_sep_list, sep_list) { + spin_unlock(&dev->se_port_lock); + spin_unlock(&hba->device_lock); + + lun = sep->sep_lun; + tpg = sep->sep_tpg; + spin_lock(&lun->lun_sep_lock); + if (lun->lun_se_dev == NULL) { + spin_unlock(&lun->lun_sep_lock); + continue; + } + spin_unlock(&lun->lun_sep_lock); + + core_dev_del_lun(tpg, lun->unpacked_lun); + + spin_lock(&hba->device_lock); + spin_lock(&dev->se_port_lock); + } + spin_unlock(&dev->se_port_lock); + + return; +} + +/* se_free_virtual_device(): + * + * Used for IBLOCK, RAMDISK, and FILEIO Transport Drivers. + */ +int se_free_virtual_device(struct se_device *dev, struct se_hba *hba) +{ + spin_lock(&hba->device_lock); + se_clear_dev_ports(dev); + spin_unlock(&hba->device_lock); + + core_alua_free_lu_gp_mem(dev); + se_release_device_for_hba(dev); + + return 0; +} + +static void se_dev_start(struct se_device *dev) +{ + struct se_hba *hba = dev->se_hba; + + spin_lock(&hba->device_lock); + atomic_inc(&dev->dev_obj.obj_access_count); + if (atomic_read(&dev->dev_obj.obj_access_count) == 1) { + if (dev->dev_status & TRANSPORT_DEVICE_DEACTIVATED) { + dev->dev_status &= ~TRANSPORT_DEVICE_DEACTIVATED; + dev->dev_status |= TRANSPORT_DEVICE_ACTIVATED; + } else if (dev->dev_status & + TRANSPORT_DEVICE_OFFLINE_DEACTIVATED) { + dev->dev_status &= + ~TRANSPORT_DEVICE_OFFLINE_DEACTIVATED; + dev->dev_status |= TRANSPORT_DEVICE_OFFLINE_ACTIVATED; + } + } + spin_unlock(&hba->device_lock); +} + +static void se_dev_stop(struct se_device *dev) +{ + struct se_hba *hba = dev->se_hba; + + spin_lock(&hba->device_lock); + atomic_dec(&dev->dev_obj.obj_access_count); + if (atomic_read(&dev->dev_obj.obj_access_count) == 0) { + if (dev->dev_status & TRANSPORT_DEVICE_ACTIVATED) { + dev->dev_status &= ~TRANSPORT_DEVICE_ACTIVATED; + dev->dev_status |= TRANSPORT_DEVICE_DEACTIVATED; + } else if (dev->dev_status & + TRANSPORT_DEVICE_OFFLINE_ACTIVATED) { + dev->dev_status &= ~TRANSPORT_DEVICE_OFFLINE_ACTIVATED; + dev->dev_status |= TRANSPORT_DEVICE_OFFLINE_DEACTIVATED; + } + } + spin_unlock(&hba->device_lock); + + while (atomic_read(&hba->dev_mib_access_count)) + cpu_relax(); +} + +int se_dev_check_online(struct se_device *dev) +{ + int ret; + + spin_lock_irq(&dev->dev_status_lock); + ret = ((dev->dev_status & TRANSPORT_DEVICE_ACTIVATED) || + (dev->dev_status & TRANSPORT_DEVICE_DEACTIVATED)) ? 0 : 1; + spin_unlock_irq(&dev->dev_status_lock); + + return ret; +} + +int se_dev_check_shutdown(struct se_device *dev) +{ + int ret; + + spin_lock_irq(&dev->dev_status_lock); + ret = (dev->dev_status & TRANSPORT_DEVICE_SHUTDOWN); + spin_unlock_irq(&dev->dev_status_lock); + + return ret; +} + +void se_dev_set_default_attribs( + struct se_device *dev, + struct se_dev_limits *dev_limits) +{ + struct queue_limits *limits = &dev_limits->limits; + + DEV_ATTRIB(dev)->emulate_dpo = DA_EMULATE_DPO; + DEV_ATTRIB(dev)->emulate_fua_write = DA_EMULATE_FUA_WRITE; + DEV_ATTRIB(dev)->emulate_fua_read = DA_EMULATE_FUA_READ; + DEV_ATTRIB(dev)->emulate_write_cache = DA_EMULATE_WRITE_CACHE; + DEV_ATTRIB(dev)->emulate_ua_intlck_ctrl = DA_EMULATE_UA_INTLLCK_CTRL; + DEV_ATTRIB(dev)->emulate_tas = DA_EMULATE_TAS; + DEV_ATTRIB(dev)->emulate_tpu = DA_EMULATE_TPU; + DEV_ATTRIB(dev)->emulate_tpws = DA_EMULATE_TPWS; + DEV_ATTRIB(dev)->emulate_reservations = DA_EMULATE_RESERVATIONS; + DEV_ATTRIB(dev)->emulate_alua = DA_EMULATE_ALUA; + DEV_ATTRIB(dev)->enforce_pr_isids = DA_ENFORCE_PR_ISIDS; + /* + * The TPU=1 and TPWS=1 settings will be set in TCM/IBLOCK + * iblock_create_virtdevice() from struct queue_limits values + * if blk_queue_discard()==1 + */ + DEV_ATTRIB(dev)->max_unmap_lba_count = DA_MAX_UNMAP_LBA_COUNT; + DEV_ATTRIB(dev)->max_unmap_block_desc_count = + DA_MAX_UNMAP_BLOCK_DESC_COUNT; + DEV_ATTRIB(dev)->unmap_granularity = DA_UNMAP_GRANULARITY_DEFAULT; + DEV_ATTRIB(dev)->unmap_granularity_alignment = + DA_UNMAP_GRANULARITY_ALIGNMENT_DEFAULT; + /* + * block_size is based on subsystem plugin dependent requirements. + */ + DEV_ATTRIB(dev)->hw_block_size = limits->logical_block_size; + DEV_ATTRIB(dev)->block_size = limits->logical_block_size; + /* + * max_sectors is based on subsystem plugin dependent requirements. + */ + DEV_ATTRIB(dev)->hw_max_sectors = limits->max_hw_sectors; + DEV_ATTRIB(dev)->max_sectors = limits->max_sectors; + /* + * Set optimal_sectors from max_sectors, which can be lowered via + * configfs. + */ + DEV_ATTRIB(dev)->optimal_sectors = limits->max_sectors; + /* + * queue_depth is based on subsystem plugin dependent requirements. + */ + DEV_ATTRIB(dev)->hw_queue_depth = dev_limits->hw_queue_depth; + DEV_ATTRIB(dev)->queue_depth = dev_limits->queue_depth; +} + +int se_dev_set_task_timeout(struct se_device *dev, u32 task_timeout) +{ + if (task_timeout > DA_TASK_TIMEOUT_MAX) { + printk(KERN_ERR "dev[%p]: Passed task_timeout: %u larger then" + " DA_TASK_TIMEOUT_MAX\n", dev, task_timeout); + return -1; + } else { + DEV_ATTRIB(dev)->task_timeout = task_timeout; + printk(KERN_INFO "dev[%p]: Set SE Device task_timeout: %u\n", + dev, task_timeout); + } + + return 0; +} + +int se_dev_set_max_unmap_lba_count( + struct se_device *dev, + u32 max_unmap_lba_count) +{ + DEV_ATTRIB(dev)->max_unmap_lba_count = max_unmap_lba_count; + printk(KERN_INFO "dev[%p]: Set max_unmap_lba_count: %u\n", + dev, DEV_ATTRIB(dev)->max_unmap_lba_count); + return 0; +} + +int se_dev_set_max_unmap_block_desc_count( + struct se_device *dev, + u32 max_unmap_block_desc_count) +{ + DEV_ATTRIB(dev)->max_unmap_block_desc_count = max_unmap_block_desc_count; + printk(KERN_INFO "dev[%p]: Set max_unmap_block_desc_count: %u\n", + dev, DEV_ATTRIB(dev)->max_unmap_block_desc_count); + return 0; +} + +int se_dev_set_unmap_granularity( + struct se_device *dev, + u32 unmap_granularity) +{ + DEV_ATTRIB(dev)->unmap_granularity = unmap_granularity; + printk(KERN_INFO "dev[%p]: Set unmap_granularity: %u\n", + dev, DEV_ATTRIB(dev)->unmap_granularity); + return 0; +} + +int se_dev_set_unmap_granularity_alignment( + struct se_device *dev, + u32 unmap_granularity_alignment) +{ + DEV_ATTRIB(dev)->unmap_granularity_alignment = unmap_granularity_alignment; + printk(KERN_INFO "dev[%p]: Set unmap_granularity_alignment: %u\n", + dev, DEV_ATTRIB(dev)->unmap_granularity_alignment); + return 0; +} + +int se_dev_set_emulate_dpo(struct se_device *dev, int flag) +{ + if ((flag != 0) && (flag != 1)) { + printk(KERN_ERR "Illegal value %d\n", flag); + return -1; + } + if (TRANSPORT(dev)->dpo_emulated == NULL) { + printk(KERN_ERR "TRANSPORT(dev)->dpo_emulated is NULL\n"); + return -1; + } + if (TRANSPORT(dev)->dpo_emulated(dev) == 0) { + printk(KERN_ERR "TRANSPORT(dev)->dpo_emulated not supported\n"); + return -1; + } + DEV_ATTRIB(dev)->emulate_dpo = flag; + printk(KERN_INFO "dev[%p]: SE Device Page Out (DPO) Emulation" + " bit: %d\n", dev, DEV_ATTRIB(dev)->emulate_dpo); + return 0; +} + +int se_dev_set_emulate_fua_write(struct se_device *dev, int flag) +{ + if ((flag != 0) && (flag != 1)) { + printk(KERN_ERR "Illegal value %d\n", flag); + return -1; + } + if (TRANSPORT(dev)->fua_write_emulated == NULL) { + printk(KERN_ERR "TRANSPORT(dev)->fua_write_emulated is NULL\n"); + return -1; + } + if (TRANSPORT(dev)->fua_write_emulated(dev) == 0) { + printk(KERN_ERR "TRANSPORT(dev)->fua_write_emulated not supported\n"); + return -1; + } + DEV_ATTRIB(dev)->emulate_fua_write = flag; + printk(KERN_INFO "dev[%p]: SE Device Forced Unit Access WRITEs: %d\n", + dev, DEV_ATTRIB(dev)->emulate_fua_write); + return 0; +} + +int se_dev_set_emulate_fua_read(struct se_device *dev, int flag) +{ + if ((flag != 0) && (flag != 1)) { + printk(KERN_ERR "Illegal value %d\n", flag); + return -1; + } + if (TRANSPORT(dev)->fua_read_emulated == NULL) { + printk(KERN_ERR "TRANSPORT(dev)->fua_read_emulated is NULL\n"); + return -1; + } + if (TRANSPORT(dev)->fua_read_emulated(dev) == 0) { + printk(KERN_ERR "TRANSPORT(dev)->fua_read_emulated not supported\n"); + return -1; + } + DEV_ATTRIB(dev)->emulate_fua_read = flag; + printk(KERN_INFO "dev[%p]: SE Device Forced Unit Access READs: %d\n", + dev, DEV_ATTRIB(dev)->emulate_fua_read); + return 0; +} + +int se_dev_set_emulate_write_cache(struct se_device *dev, int flag) +{ + if ((flag != 0) && (flag != 1)) { + printk(KERN_ERR "Illegal value %d\n", flag); + return -1; + } + if (TRANSPORT(dev)->write_cache_emulated == NULL) { + printk(KERN_ERR "TRANSPORT(dev)->write_cache_emulated is NULL\n"); + return -1; + } + if (TRANSPORT(dev)->write_cache_emulated(dev) == 0) { + printk(KERN_ERR "TRANSPORT(dev)->write_cache_emulated not supported\n"); + return -1; + } + DEV_ATTRIB(dev)->emulate_write_cache = flag; + printk(KERN_INFO "dev[%p]: SE Device WRITE_CACHE_EMULATION flag: %d\n", + dev, DEV_ATTRIB(dev)->emulate_write_cache); + return 0; +} + +int se_dev_set_emulate_ua_intlck_ctrl(struct se_device *dev, int flag) +{ + if ((flag != 0) && (flag != 1) && (flag != 2)) { + printk(KERN_ERR "Illegal value %d\n", flag); + return -1; + } + + if (atomic_read(&dev->dev_export_obj.obj_access_count)) { + printk(KERN_ERR "dev[%p]: Unable to change SE Device" + " UA_INTRLCK_CTRL while dev_export_obj: %d count" + " exists\n", dev, + atomic_read(&dev->dev_export_obj.obj_access_count)); + return -1; + } + DEV_ATTRIB(dev)->emulate_ua_intlck_ctrl = flag; + printk(KERN_INFO "dev[%p]: SE Device UA_INTRLCK_CTRL flag: %d\n", + dev, DEV_ATTRIB(dev)->emulate_ua_intlck_ctrl); + + return 0; +} + +int se_dev_set_emulate_tas(struct se_device *dev, int flag) +{ + if ((flag != 0) && (flag != 1)) { + printk(KERN_ERR "Illegal value %d\n", flag); + return -1; + } + + if (atomic_read(&dev->dev_export_obj.obj_access_count)) { + printk(KERN_ERR "dev[%p]: Unable to change SE Device TAS while" + " dev_export_obj: %d count exists\n", dev, + atomic_read(&dev->dev_export_obj.obj_access_count)); + return -1; + } + DEV_ATTRIB(dev)->emulate_tas = flag; + printk(KERN_INFO "dev[%p]: SE Device TASK_ABORTED status bit: %s\n", + dev, (DEV_ATTRIB(dev)->emulate_tas) ? "Enabled" : "Disabled"); + + return 0; +} + +int se_dev_set_emulate_tpu(struct se_device *dev, int flag) +{ + if ((flag != 0) && (flag != 1)) { + printk(KERN_ERR "Illegal value %d\n", flag); + return -1; + } + /* + * We expect this value to be non-zero when generic Block Layer + * Discard supported is detected iblock_create_virtdevice(). + */ + if (!(DEV_ATTRIB(dev)->max_unmap_block_desc_count)) { + printk(KERN_ERR "Generic Block Discard not supported\n"); + return -ENOSYS; + } + + DEV_ATTRIB(dev)->emulate_tpu = flag; + printk(KERN_INFO "dev[%p]: SE Device Thin Provisioning UNMAP bit: %d\n", + dev, flag); + return 0; +} + +int se_dev_set_emulate_tpws(struct se_device *dev, int flag) +{ + if ((flag != 0) && (flag != 1)) { + printk(KERN_ERR "Illegal value %d\n", flag); + return -1; + } + /* + * We expect this value to be non-zero when generic Block Layer + * Discard supported is detected iblock_create_virtdevice(). + */ + if (!(DEV_ATTRIB(dev)->max_unmap_block_desc_count)) { + printk(KERN_ERR "Generic Block Discard not supported\n"); + return -ENOSYS; + } + + DEV_ATTRIB(dev)->emulate_tpws = flag; + printk(KERN_INFO "dev[%p]: SE Device Thin Provisioning WRITE_SAME: %d\n", + dev, flag); + return 0; +} + +int se_dev_set_enforce_pr_isids(struct se_device *dev, int flag) +{ + if ((flag != 0) && (flag != 1)) { + printk(KERN_ERR "Illegal value %d\n", flag); + return -1; + } + DEV_ATTRIB(dev)->enforce_pr_isids = flag; + printk(KERN_INFO "dev[%p]: SE Device enforce_pr_isids bit: %s\n", dev, + (DEV_ATTRIB(dev)->enforce_pr_isids) ? "Enabled" : "Disabled"); + return 0; +} + +/* + * Note, this can only be called on unexported SE Device Object. + */ +int se_dev_set_queue_depth(struct se_device *dev, u32 queue_depth) +{ + u32 orig_queue_depth = dev->queue_depth; + + if (atomic_read(&dev->dev_export_obj.obj_access_count)) { + printk(KERN_ERR "dev[%p]: Unable to change SE Device TCQ while" + " dev_export_obj: %d count exists\n", dev, + atomic_read(&dev->dev_export_obj.obj_access_count)); + return -1; + } + if (!(queue_depth)) { + printk(KERN_ERR "dev[%p]: Illegal ZERO value for queue" + "_depth\n", dev); + return -1; + } + + if (TRANSPORT(dev)->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) { + if (queue_depth > DEV_ATTRIB(dev)->hw_queue_depth) { + printk(KERN_ERR "dev[%p]: Passed queue_depth: %u" + " exceeds TCM/SE_Device TCQ: %u\n", + dev, queue_depth, + DEV_ATTRIB(dev)->hw_queue_depth); + return -1; + } + } else { + if (queue_depth > DEV_ATTRIB(dev)->queue_depth) { + if (queue_depth > DEV_ATTRIB(dev)->hw_queue_depth) { + printk(KERN_ERR "dev[%p]: Passed queue_depth:" + " %u exceeds TCM/SE_Device MAX" + " TCQ: %u\n", dev, queue_depth, + DEV_ATTRIB(dev)->hw_queue_depth); + return -1; + } + } + } + + DEV_ATTRIB(dev)->queue_depth = dev->queue_depth = queue_depth; + if (queue_depth > orig_queue_depth) + atomic_add(queue_depth - orig_queue_depth, &dev->depth_left); + else if (queue_depth < orig_queue_depth) + atomic_sub(orig_queue_depth - queue_depth, &dev->depth_left); + + printk(KERN_INFO "dev[%p]: SE Device TCQ Depth changed to: %u\n", + dev, queue_depth); + return 0; +} + +int se_dev_set_max_sectors(struct se_device *dev, u32 max_sectors) +{ + int force = 0; /* Force setting for VDEVS */ + + if (atomic_read(&dev->dev_export_obj.obj_access_count)) { + printk(KERN_ERR "dev[%p]: Unable to change SE Device" + " max_sectors while dev_export_obj: %d count exists\n", + dev, atomic_read(&dev->dev_export_obj.obj_access_count)); + return -1; + } + if (!(max_sectors)) { + printk(KERN_ERR "dev[%p]: Illegal ZERO value for" + " max_sectors\n", dev); + return -1; + } + if (max_sectors < DA_STATUS_MAX_SECTORS_MIN) { + printk(KERN_ERR "dev[%p]: Passed max_sectors: %u less than" + " DA_STATUS_MAX_SECTORS_MIN: %u\n", dev, max_sectors, + DA_STATUS_MAX_SECTORS_MIN); + return -1; + } + if (TRANSPORT(dev)->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) { + if (max_sectors > DEV_ATTRIB(dev)->hw_max_sectors) { + printk(KERN_ERR "dev[%p]: Passed max_sectors: %u" + " greater than TCM/SE_Device max_sectors:" + " %u\n", dev, max_sectors, + DEV_ATTRIB(dev)->hw_max_sectors); + return -1; + } + } else { + if (!(force) && (max_sectors > + DEV_ATTRIB(dev)->hw_max_sectors)) { + printk(KERN_ERR "dev[%p]: Passed max_sectors: %u" + " greater than TCM/SE_Device max_sectors" + ": %u, use force=1 to override.\n", dev, + max_sectors, DEV_ATTRIB(dev)->hw_max_sectors); + return -1; + } + if (max_sectors > DA_STATUS_MAX_SECTORS_MAX) { + printk(KERN_ERR "dev[%p]: Passed max_sectors: %u" + " greater than DA_STATUS_MAX_SECTORS_MAX:" + " %u\n", dev, max_sectors, + DA_STATUS_MAX_SECTORS_MAX); + return -1; + } + } + + DEV_ATTRIB(dev)->max_sectors = max_sectors; + printk("dev[%p]: SE Device max_sectors changed to %u\n", + dev, max_sectors); + return 0; +} + +int se_dev_set_optimal_sectors(struct se_device *dev, u32 optimal_sectors) +{ + if (atomic_read(&dev->dev_export_obj.obj_access_count)) { + printk(KERN_ERR "dev[%p]: Unable to change SE Device" + " optimal_sectors while dev_export_obj: %d count exists\n", + dev, atomic_read(&dev->dev_export_obj.obj_access_count)); + return -EINVAL; + } + if (TRANSPORT(dev)->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) { + printk(KERN_ERR "dev[%p]: Passed optimal_sectors cannot be" + " changed for TCM/pSCSI\n", dev); + return -EINVAL; + } + if (optimal_sectors > DEV_ATTRIB(dev)->max_sectors) { + printk(KERN_ERR "dev[%p]: Passed optimal_sectors %u cannot be" + " greater than max_sectors: %u\n", dev, + optimal_sectors, DEV_ATTRIB(dev)->max_sectors); + return -EINVAL; + } + + DEV_ATTRIB(dev)->optimal_sectors = optimal_sectors; + printk(KERN_INFO "dev[%p]: SE Device optimal_sectors changed to %u\n", + dev, optimal_sectors); + return 0; +} + +int se_dev_set_block_size(struct se_device *dev, u32 block_size) +{ + if (atomic_read(&dev->dev_export_obj.obj_access_count)) { + printk(KERN_ERR "dev[%p]: Unable to change SE Device block_size" + " while dev_export_obj: %d count exists\n", dev, + atomic_read(&dev->dev_export_obj.obj_access_count)); + return -1; + } + + if ((block_size != 512) && + (block_size != 1024) && + (block_size != 2048) && + (block_size != 4096)) { + printk(KERN_ERR "dev[%p]: Illegal value for block_device: %u" + " for SE device, must be 512, 1024, 2048 or 4096\n", + dev, block_size); + return -1; + } + + if (TRANSPORT(dev)->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) { + printk(KERN_ERR "dev[%p]: Not allowed to change block_size for" + " Physical Device, use for Linux/SCSI to change" + " block_size for underlying hardware\n", dev); + return -1; + } + + DEV_ATTRIB(dev)->block_size = block_size; + printk(KERN_INFO "dev[%p]: SE Device block_size changed to %u\n", + dev, block_size); + return 0; +} + +struct se_lun *core_dev_add_lun( + struct se_portal_group *tpg, + struct se_hba *hba, + struct se_device *dev, + u32 lun) +{ + struct se_lun *lun_p; + u32 lun_access = 0; + + if (atomic_read(&dev->dev_access_obj.obj_access_count) != 0) { + printk(KERN_ERR "Unable to export struct se_device while dev_access_obj: %d\n", + atomic_read(&dev->dev_access_obj.obj_access_count)); + return NULL; + } + + lun_p = core_tpg_pre_addlun(tpg, lun); + if ((IS_ERR(lun_p)) || !(lun_p)) + return NULL; + + if (dev->dev_flags & DF_READ_ONLY) + lun_access = TRANSPORT_LUNFLAGS_READ_ONLY; + else + lun_access = TRANSPORT_LUNFLAGS_READ_WRITE; + + if (core_tpg_post_addlun(tpg, lun_p, lun_access, dev) < 0) + return NULL; + + printk(KERN_INFO "%s_TPG[%u]_LUN[%u] - Activated %s Logical Unit from" + " CORE HBA: %u\n", TPG_TFO(tpg)->get_fabric_name(), + TPG_TFO(tpg)->tpg_get_tag(tpg), lun_p->unpacked_lun, + TPG_TFO(tpg)->get_fabric_name(), hba->hba_id); + /* + * Update LUN maps for dynamically added initiators when + * generate_node_acl is enabled. + */ + if (TPG_TFO(tpg)->tpg_check_demo_mode(tpg)) { + struct se_node_acl *acl; + spin_lock_bh(&tpg->acl_node_lock); + list_for_each_entry(acl, &tpg->acl_node_list, acl_list) { + if (acl->dynamic_node_acl) { + spin_unlock_bh(&tpg->acl_node_lock); + core_tpg_add_node_to_devs(acl, tpg); + spin_lock_bh(&tpg->acl_node_lock); + } + } + spin_unlock_bh(&tpg->acl_node_lock); + } + + return lun_p; +} + +/* core_dev_del_lun(): + * + * + */ +int core_dev_del_lun( + struct se_portal_group *tpg, + u32 unpacked_lun) +{ + struct se_lun *lun; + int ret = 0; + + lun = core_tpg_pre_dellun(tpg, unpacked_lun, &ret); + if (!(lun)) + return ret; + + core_tpg_post_dellun(tpg, lun); + + printk(KERN_INFO "%s_TPG[%u]_LUN[%u] - Deactivated %s Logical Unit from" + " device object\n", TPG_TFO(tpg)->get_fabric_name(), + TPG_TFO(tpg)->tpg_get_tag(tpg), unpacked_lun, + TPG_TFO(tpg)->get_fabric_name()); + + return 0; +} + +struct se_lun *core_get_lun_from_tpg(struct se_portal_group *tpg, u32 unpacked_lun) +{ + struct se_lun *lun; + + spin_lock(&tpg->tpg_lun_lock); + if (unpacked_lun > (TRANSPORT_MAX_LUNS_PER_TPG-1)) { + printk(KERN_ERR "%s LUN: %u exceeds TRANSPORT_MAX_LUNS" + "_PER_TPG-1: %u for Target Portal Group: %hu\n", + TPG_TFO(tpg)->get_fabric_name(), unpacked_lun, + TRANSPORT_MAX_LUNS_PER_TPG-1, + TPG_TFO(tpg)->tpg_get_tag(tpg)); + spin_unlock(&tpg->tpg_lun_lock); + return NULL; + } + lun = &tpg->tpg_lun_list[unpacked_lun]; + + if (lun->lun_status != TRANSPORT_LUN_STATUS_FREE) { + printk(KERN_ERR "%s Logical Unit Number: %u is not free on" + " Target Portal Group: %hu, ignoring request.\n", + TPG_TFO(tpg)->get_fabric_name(), unpacked_lun, + TPG_TFO(tpg)->tpg_get_tag(tpg)); + spin_unlock(&tpg->tpg_lun_lock); + return NULL; + } + spin_unlock(&tpg->tpg_lun_lock); + + return lun; +} + +/* core_dev_get_lun(): + * + * + */ +static struct se_lun *core_dev_get_lun(struct se_portal_group *tpg, u32 unpacked_lun) +{ + struct se_lun *lun; + + spin_lock(&tpg->tpg_lun_lock); + if (unpacked_lun > (TRANSPORT_MAX_LUNS_PER_TPG-1)) { + printk(KERN_ERR "%s LUN: %u exceeds TRANSPORT_MAX_LUNS_PER" + "_TPG-1: %u for Target Portal Group: %hu\n", + TPG_TFO(tpg)->get_fabric_name(), unpacked_lun, + TRANSPORT_MAX_LUNS_PER_TPG-1, + TPG_TFO(tpg)->tpg_get_tag(tpg)); + spin_unlock(&tpg->tpg_lun_lock); + return NULL; + } + lun = &tpg->tpg_lun_list[unpacked_lun]; + + if (lun->lun_status != TRANSPORT_LUN_STATUS_ACTIVE) { + printk(KERN_ERR "%s Logical Unit Number: %u is not active on" + " Target Portal Group: %hu, ignoring request.\n", + TPG_TFO(tpg)->get_fabric_name(), unpacked_lun, + TPG_TFO(tpg)->tpg_get_tag(tpg)); + spin_unlock(&tpg->tpg_lun_lock); + return NULL; + } + spin_unlock(&tpg->tpg_lun_lock); + + return lun; +} + +struct se_lun_acl *core_dev_init_initiator_node_lun_acl( + struct se_portal_group *tpg, + u32 mapped_lun, + char *initiatorname, + int *ret) +{ + struct se_lun_acl *lacl; + struct se_node_acl *nacl; + + if (strlen(initiatorname) > TRANSPORT_IQN_LEN) { + printk(KERN_ERR "%s InitiatorName exceeds maximum size.\n", + TPG_TFO(tpg)->get_fabric_name()); + *ret = -EOVERFLOW; + return NULL; + } + nacl = core_tpg_get_initiator_node_acl(tpg, initiatorname); + if (!(nacl)) { + *ret = -EINVAL; + return NULL; + } + lacl = kzalloc(sizeof(struct se_lun_acl), GFP_KERNEL); + if (!(lacl)) { + printk(KERN_ERR "Unable to allocate memory for struct se_lun_acl.\n"); + *ret = -ENOMEM; + return NULL; + } + + INIT_LIST_HEAD(&lacl->lacl_list); + lacl->mapped_lun = mapped_lun; + lacl->se_lun_nacl = nacl; + snprintf(lacl->initiatorname, TRANSPORT_IQN_LEN, "%s", initiatorname); + + return lacl; +} + +int core_dev_add_initiator_node_lun_acl( + struct se_portal_group *tpg, + struct se_lun_acl *lacl, + u32 unpacked_lun, + u32 lun_access) +{ + struct se_lun *lun; + struct se_node_acl *nacl; + + lun = core_dev_get_lun(tpg, unpacked_lun); + if (!(lun)) { + printk(KERN_ERR "%s Logical Unit Number: %u is not active on" + " Target Portal Group: %hu, ignoring request.\n", + TPG_TFO(tpg)->get_fabric_name(), unpacked_lun, + TPG_TFO(tpg)->tpg_get_tag(tpg)); + return -EINVAL; + } + + nacl = lacl->se_lun_nacl; + if (!(nacl)) + return -EINVAL; + + if ((lun->lun_access & TRANSPORT_LUNFLAGS_READ_ONLY) && + (lun_access & TRANSPORT_LUNFLAGS_READ_WRITE)) + lun_access = TRANSPORT_LUNFLAGS_READ_ONLY; + + lacl->se_lun = lun; + + if (core_update_device_list_for_node(lun, lacl, lacl->mapped_lun, + lun_access, nacl, tpg, 1) < 0) + return -EINVAL; + + spin_lock(&lun->lun_acl_lock); + list_add_tail(&lacl->lacl_list, &lun->lun_acl_list); + atomic_inc(&lun->lun_acl_count); + smp_mb__after_atomic_inc(); + spin_unlock(&lun->lun_acl_lock); + + printk(KERN_INFO "%s_TPG[%hu]_LUN[%u->%u] - Added %s ACL for " + " InitiatorNode: %s\n", TPG_TFO(tpg)->get_fabric_name(), + TPG_TFO(tpg)->tpg_get_tag(tpg), unpacked_lun, lacl->mapped_lun, + (lun_access & TRANSPORT_LUNFLAGS_READ_WRITE) ? "RW" : "RO", + lacl->initiatorname); + /* + * Check to see if there are any existing persistent reservation APTPL + * pre-registrations that need to be enabled for this LUN ACL.. + */ + core_scsi3_check_aptpl_registration(lun->lun_se_dev, tpg, lun, lacl); + return 0; +} + +/* core_dev_del_initiator_node_lun_acl(): + * + * + */ +int core_dev_del_initiator_node_lun_acl( + struct se_portal_group *tpg, + struct se_lun *lun, + struct se_lun_acl *lacl) +{ + struct se_node_acl *nacl; + + nacl = lacl->se_lun_nacl; + if (!(nacl)) + return -EINVAL; + + spin_lock(&lun->lun_acl_lock); + list_del(&lacl->lacl_list); + atomic_dec(&lun->lun_acl_count); + smp_mb__after_atomic_dec(); + spin_unlock(&lun->lun_acl_lock); + + core_update_device_list_for_node(lun, NULL, lacl->mapped_lun, + TRANSPORT_LUNFLAGS_NO_ACCESS, nacl, tpg, 0); + + lacl->se_lun = NULL; + + printk(KERN_INFO "%s_TPG[%hu]_LUN[%u] - Removed ACL for" + " InitiatorNode: %s Mapped LUN: %u\n", + TPG_TFO(tpg)->get_fabric_name(), + TPG_TFO(tpg)->tpg_get_tag(tpg), lun->unpacked_lun, + lacl->initiatorname, lacl->mapped_lun); + + return 0; +} + +void core_dev_free_initiator_node_lun_acl( + struct se_portal_group *tpg, + struct se_lun_acl *lacl) +{ + printk("%s_TPG[%hu] - Freeing ACL for %s InitiatorNode: %s" + " Mapped LUN: %u\n", TPG_TFO(tpg)->get_fabric_name(), + TPG_TFO(tpg)->tpg_get_tag(tpg), + TPG_TFO(tpg)->get_fabric_name(), + lacl->initiatorname, lacl->mapped_lun); + + kfree(lacl); +} + +int core_dev_setup_virtual_lun0(void) +{ + struct se_hba *hba; + struct se_device *dev; + struct se_subsystem_dev *se_dev = NULL; + struct se_subsystem_api *t; + char buf[16]; + int ret; + + hba = core_alloc_hba("rd_dr", 0, HBA_FLAGS_INTERNAL_USE); + if (IS_ERR(hba)) + return PTR_ERR(hba); + + se_global->g_lun0_hba = hba; + t = hba->transport; + + se_dev = kzalloc(sizeof(struct se_subsystem_dev), GFP_KERNEL); + if (!(se_dev)) { + printk(KERN_ERR "Unable to allocate memory for" + " struct se_subsystem_dev\n"); + ret = -ENOMEM; + goto out; + } + INIT_LIST_HEAD(&se_dev->g_se_dev_list); + INIT_LIST_HEAD(&se_dev->t10_wwn.t10_vpd_list); + spin_lock_init(&se_dev->t10_wwn.t10_vpd_lock); + INIT_LIST_HEAD(&se_dev->t10_reservation.registration_list); + INIT_LIST_HEAD(&se_dev->t10_reservation.aptpl_reg_list); + spin_lock_init(&se_dev->t10_reservation.registration_lock); + spin_lock_init(&se_dev->t10_reservation.aptpl_reg_lock); + INIT_LIST_HEAD(&se_dev->t10_alua.tg_pt_gps_list); + spin_lock_init(&se_dev->t10_alua.tg_pt_gps_lock); + spin_lock_init(&se_dev->se_dev_lock); + se_dev->t10_reservation.pr_aptpl_buf_len = PR_APTPL_BUF_LEN; + se_dev->t10_wwn.t10_sub_dev = se_dev; + se_dev->t10_alua.t10_sub_dev = se_dev; + se_dev->se_dev_attrib.da_sub_dev = se_dev; + se_dev->se_dev_hba = hba; + + se_dev->se_dev_su_ptr = t->allocate_virtdevice(hba, "virt_lun0"); + if (!(se_dev->se_dev_su_ptr)) { + printk(KERN_ERR "Unable to locate subsystem dependent pointer" + " from allocate_virtdevice()\n"); + ret = -ENOMEM; + goto out; + } + se_global->g_lun0_su_dev = se_dev; + + memset(buf, 0, 16); + sprintf(buf, "rd_pages=8"); + t->set_configfs_dev_params(hba, se_dev, buf, sizeof(buf)); + + dev = t->create_virtdevice(hba, se_dev, se_dev->se_dev_su_ptr); + if (!(dev) || IS_ERR(dev)) { + ret = -ENOMEM; + goto out; + } + se_dev->se_dev_ptr = dev; + se_global->g_lun0_dev = dev; + + return 0; +out: + se_global->g_lun0_su_dev = NULL; + kfree(se_dev); + if (se_global->g_lun0_hba) { + core_delete_hba(se_global->g_lun0_hba); + se_global->g_lun0_hba = NULL; + } + return ret; +} + + +void core_dev_release_virtual_lun0(void) +{ + struct se_hba *hba = se_global->g_lun0_hba; + struct se_subsystem_dev *su_dev = se_global->g_lun0_su_dev; + + if (!(hba)) + return; + + if (se_global->g_lun0_dev) + se_free_virtual_device(se_global->g_lun0_dev, hba); + + kfree(su_dev); + core_delete_hba(hba); +} diff --git a/drivers/target/target_core_fabric_configfs.c b/drivers/target/target_core_fabric_configfs.c new file mode 100644 index 000000000000..32b148d7e261 --- /dev/null +++ b/drivers/target/target_core_fabric_configfs.c @@ -0,0 +1,996 @@ +/******************************************************************************* +* Filename: target_core_fabric_configfs.c + * + * This file contains generic fabric module configfs infrastructure for + * TCM v4.x code + * + * Copyright (c) 2010 Rising Tide Systems + * Copyright (c) 2010 Linux-iSCSI.org + * + * Copyright (c) 2010 Nicholas A. Bellinger +* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + ****************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "target_core_alua.h" +#include "target_core_hba.h" +#include "target_core_pr.h" + +#define TF_CIT_SETUP(_name, _item_ops, _group_ops, _attrs) \ +static void target_fabric_setup_##_name##_cit(struct target_fabric_configfs *tf) \ +{ \ + struct target_fabric_configfs_template *tfc = &tf->tf_cit_tmpl; \ + struct config_item_type *cit = &tfc->tfc_##_name##_cit; \ + \ + cit->ct_item_ops = _item_ops; \ + cit->ct_group_ops = _group_ops; \ + cit->ct_attrs = _attrs; \ + cit->ct_owner = tf->tf_module; \ + printk("Setup generic %s\n", __stringify(_name)); \ +} + +/* Start of tfc_tpg_mappedlun_cit */ + +static int target_fabric_mappedlun_link( + struct config_item *lun_acl_ci, + struct config_item *lun_ci) +{ + struct se_dev_entry *deve; + struct se_lun *lun = container_of(to_config_group(lun_ci), + struct se_lun, lun_group); + struct se_lun_acl *lacl = container_of(to_config_group(lun_acl_ci), + struct se_lun_acl, se_lun_group); + struct se_portal_group *se_tpg; + struct config_item *nacl_ci, *tpg_ci, *tpg_ci_s, *wwn_ci, *wwn_ci_s; + int ret = 0, lun_access; + /* + * Ensure that the source port exists + */ + if (!(lun->lun_sep) || !(lun->lun_sep->sep_tpg)) { + printk(KERN_ERR "Source se_lun->lun_sep or lun->lun_sep->sep" + "_tpg does not exist\n"); + return -EINVAL; + } + se_tpg = lun->lun_sep->sep_tpg; + + nacl_ci = &lun_acl_ci->ci_parent->ci_group->cg_item; + tpg_ci = &nacl_ci->ci_group->cg_item; + wwn_ci = &tpg_ci->ci_group->cg_item; + tpg_ci_s = &lun_ci->ci_parent->ci_group->cg_item; + wwn_ci_s = &tpg_ci_s->ci_group->cg_item; + /* + * Make sure the SymLink is going to the same $FABRIC/$WWN/tpgt_$TPGT + */ + if (strcmp(config_item_name(wwn_ci), config_item_name(wwn_ci_s))) { + printk(KERN_ERR "Illegal Initiator ACL SymLink outside of %s\n", + config_item_name(wwn_ci)); + return -EINVAL; + } + if (strcmp(config_item_name(tpg_ci), config_item_name(tpg_ci_s))) { + printk(KERN_ERR "Illegal Initiator ACL Symlink outside of %s" + " TPGT: %s\n", config_item_name(wwn_ci), + config_item_name(tpg_ci)); + return -EINVAL; + } + /* + * If this struct se_node_acl was dynamically generated with + * tpg_1/attrib/generate_node_acls=1, use the existing deve->lun_flags, + * which be will write protected (READ-ONLY) when + * tpg_1/attrib/demo_mode_write_protect=1 + */ + spin_lock_irq(&lacl->se_lun_nacl->device_list_lock); + deve = &lacl->se_lun_nacl->device_list[lacl->mapped_lun]; + if (deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS) + lun_access = deve->lun_flags; + else + lun_access = + (TPG_TFO(se_tpg)->tpg_check_prod_mode_write_protect( + se_tpg)) ? TRANSPORT_LUNFLAGS_READ_ONLY : + TRANSPORT_LUNFLAGS_READ_WRITE; + spin_unlock_irq(&lacl->se_lun_nacl->device_list_lock); + /* + * Determine the actual mapped LUN value user wants.. + * + * This value is what the SCSI Initiator actually sees the + * iscsi/$IQN/$TPGT/lun/lun_* as on their SCSI Initiator Ports. + */ + ret = core_dev_add_initiator_node_lun_acl(se_tpg, lacl, + lun->unpacked_lun, lun_access); + + return (ret < 0) ? -EINVAL : 0; +} + +static int target_fabric_mappedlun_unlink( + struct config_item *lun_acl_ci, + struct config_item *lun_ci) +{ + struct se_lun *lun; + struct se_lun_acl *lacl = container_of(to_config_group(lun_acl_ci), + struct se_lun_acl, se_lun_group); + struct se_node_acl *nacl = lacl->se_lun_nacl; + struct se_dev_entry *deve = &nacl->device_list[lacl->mapped_lun]; + struct se_portal_group *se_tpg; + /* + * Determine if the underlying MappedLUN has already been released.. + */ + if (!(deve->se_lun)) + return 0; + + lun = container_of(to_config_group(lun_ci), struct se_lun, lun_group); + se_tpg = lun->lun_sep->sep_tpg; + + core_dev_del_initiator_node_lun_acl(se_tpg, lun, lacl); + return 0; +} + +CONFIGFS_EATTR_STRUCT(target_fabric_mappedlun, se_lun_acl); +#define TCM_MAPPEDLUN_ATTR(_name, _mode) \ +static struct target_fabric_mappedlun_attribute target_fabric_mappedlun_##_name = \ + __CONFIGFS_EATTR(_name, _mode, \ + target_fabric_mappedlun_show_##_name, \ + target_fabric_mappedlun_store_##_name); + +static ssize_t target_fabric_mappedlun_show_write_protect( + struct se_lun_acl *lacl, + char *page) +{ + struct se_node_acl *se_nacl = lacl->se_lun_nacl; + struct se_dev_entry *deve; + ssize_t len; + + spin_lock_irq(&se_nacl->device_list_lock); + deve = &se_nacl->device_list[lacl->mapped_lun]; + len = sprintf(page, "%d\n", + (deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY) ? + 1 : 0); + spin_unlock_irq(&se_nacl->device_list_lock); + + return len; +} + +static ssize_t target_fabric_mappedlun_store_write_protect( + struct se_lun_acl *lacl, + const char *page, + size_t count) +{ + struct se_node_acl *se_nacl = lacl->se_lun_nacl; + struct se_portal_group *se_tpg = se_nacl->se_tpg; + unsigned long op; + + if (strict_strtoul(page, 0, &op)) + return -EINVAL; + + if ((op != 1) && (op != 0)) + return -EINVAL; + + core_update_device_list_access(lacl->mapped_lun, (op) ? + TRANSPORT_LUNFLAGS_READ_ONLY : + TRANSPORT_LUNFLAGS_READ_WRITE, + lacl->se_lun_nacl); + + printk(KERN_INFO "%s_ConfigFS: Changed Initiator ACL: %s" + " Mapped LUN: %u Write Protect bit to %s\n", + TPG_TFO(se_tpg)->get_fabric_name(), + lacl->initiatorname, lacl->mapped_lun, (op) ? "ON" : "OFF"); + + return count; + +} + +TCM_MAPPEDLUN_ATTR(write_protect, S_IRUGO | S_IWUSR); + +CONFIGFS_EATTR_OPS(target_fabric_mappedlun, se_lun_acl, se_lun_group); + +static struct configfs_attribute *target_fabric_mappedlun_attrs[] = { + &target_fabric_mappedlun_write_protect.attr, + NULL, +}; + +static struct configfs_item_operations target_fabric_mappedlun_item_ops = { + .show_attribute = target_fabric_mappedlun_attr_show, + .store_attribute = target_fabric_mappedlun_attr_store, + .allow_link = target_fabric_mappedlun_link, + .drop_link = target_fabric_mappedlun_unlink, +}; + +TF_CIT_SETUP(tpg_mappedlun, &target_fabric_mappedlun_item_ops, NULL, + target_fabric_mappedlun_attrs); + +/* End of tfc_tpg_mappedlun_cit */ + +/* Start of tfc_tpg_nacl_attrib_cit */ + +CONFIGFS_EATTR_OPS(target_fabric_nacl_attrib, se_node_acl, acl_attrib_group); + +static struct configfs_item_operations target_fabric_nacl_attrib_item_ops = { + .show_attribute = target_fabric_nacl_attrib_attr_show, + .store_attribute = target_fabric_nacl_attrib_attr_store, +}; + +TF_CIT_SETUP(tpg_nacl_attrib, &target_fabric_nacl_attrib_item_ops, NULL, NULL); + +/* End of tfc_tpg_nacl_attrib_cit */ + +/* Start of tfc_tpg_nacl_auth_cit */ + +CONFIGFS_EATTR_OPS(target_fabric_nacl_auth, se_node_acl, acl_auth_group); + +static struct configfs_item_operations target_fabric_nacl_auth_item_ops = { + .show_attribute = target_fabric_nacl_auth_attr_show, + .store_attribute = target_fabric_nacl_auth_attr_store, +}; + +TF_CIT_SETUP(tpg_nacl_auth, &target_fabric_nacl_auth_item_ops, NULL, NULL); + +/* End of tfc_tpg_nacl_auth_cit */ + +/* Start of tfc_tpg_nacl_param_cit */ + +CONFIGFS_EATTR_OPS(target_fabric_nacl_param, se_node_acl, acl_param_group); + +static struct configfs_item_operations target_fabric_nacl_param_item_ops = { + .show_attribute = target_fabric_nacl_param_attr_show, + .store_attribute = target_fabric_nacl_param_attr_store, +}; + +TF_CIT_SETUP(tpg_nacl_param, &target_fabric_nacl_param_item_ops, NULL, NULL); + +/* End of tfc_tpg_nacl_param_cit */ + +/* Start of tfc_tpg_nacl_base_cit */ + +CONFIGFS_EATTR_OPS(target_fabric_nacl_base, se_node_acl, acl_group); + +static struct config_group *target_fabric_make_mappedlun( + struct config_group *group, + const char *name) +{ + struct se_node_acl *se_nacl = container_of(group, + struct se_node_acl, acl_group); + struct se_portal_group *se_tpg = se_nacl->se_tpg; + struct target_fabric_configfs *tf = se_tpg->se_tpg_wwn->wwn_tf; + struct se_lun_acl *lacl; + struct config_item *acl_ci; + char *buf; + unsigned long mapped_lun; + int ret = 0; + + acl_ci = &group->cg_item; + if (!(acl_ci)) { + printk(KERN_ERR "Unable to locatel acl_ci\n"); + return NULL; + } + + buf = kzalloc(strlen(name) + 1, GFP_KERNEL); + if (!(buf)) { + printk(KERN_ERR "Unable to allocate memory for name buf\n"); + return ERR_PTR(-ENOMEM); + } + snprintf(buf, strlen(name) + 1, "%s", name); + /* + * Make sure user is creating iscsi/$IQN/$TPGT/acls/$INITIATOR/lun_$ID. + */ + if (strstr(buf, "lun_") != buf) { + printk(KERN_ERR "Unable to locate \"lun_\" from buf: %s" + " name: %s\n", buf, name); + ret = -EINVAL; + goto out; + } + /* + * Determine the Mapped LUN value. This is what the SCSI Initiator + * Port will actually see. + */ + if (strict_strtoul(buf + 4, 0, &mapped_lun) || mapped_lun > UINT_MAX) { + ret = -EINVAL; + goto out; + } + + lacl = core_dev_init_initiator_node_lun_acl(se_tpg, mapped_lun, + config_item_name(acl_ci), &ret); + if (!(lacl)) + goto out; + + config_group_init_type_name(&lacl->se_lun_group, name, + &TF_CIT_TMPL(tf)->tfc_tpg_mappedlun_cit); + + kfree(buf); + return &lacl->se_lun_group; +out: + kfree(buf); + return ERR_PTR(ret); +} + +static void target_fabric_drop_mappedlun( + struct config_group *group, + struct config_item *item) +{ + struct se_lun_acl *lacl = container_of(to_config_group(item), + struct se_lun_acl, se_lun_group); + struct se_portal_group *se_tpg = lacl->se_lun_nacl->se_tpg; + + config_item_put(item); + core_dev_free_initiator_node_lun_acl(se_tpg, lacl); +} + +static struct configfs_item_operations target_fabric_nacl_base_item_ops = { + .show_attribute = target_fabric_nacl_base_attr_show, + .store_attribute = target_fabric_nacl_base_attr_store, +}; + +static struct configfs_group_operations target_fabric_nacl_base_group_ops = { + .make_group = target_fabric_make_mappedlun, + .drop_item = target_fabric_drop_mappedlun, +}; + +TF_CIT_SETUP(tpg_nacl_base, &target_fabric_nacl_base_item_ops, + &target_fabric_nacl_base_group_ops, NULL); + +/* End of tfc_tpg_nacl_base_cit */ + +/* Start of tfc_tpg_nacl_cit */ + +static struct config_group *target_fabric_make_nodeacl( + struct config_group *group, + const char *name) +{ + struct se_portal_group *se_tpg = container_of(group, + struct se_portal_group, tpg_acl_group); + struct target_fabric_configfs *tf = se_tpg->se_tpg_wwn->wwn_tf; + struct se_node_acl *se_nacl; + struct config_group *nacl_cg; + + if (!(tf->tf_ops.fabric_make_nodeacl)) { + printk(KERN_ERR "tf->tf_ops.fabric_make_nodeacl is NULL\n"); + return ERR_PTR(-ENOSYS); + } + + se_nacl = tf->tf_ops.fabric_make_nodeacl(se_tpg, group, name); + if (IS_ERR(se_nacl)) + return ERR_PTR(PTR_ERR(se_nacl)); + + nacl_cg = &se_nacl->acl_group; + nacl_cg->default_groups = se_nacl->acl_default_groups; + nacl_cg->default_groups[0] = &se_nacl->acl_attrib_group; + nacl_cg->default_groups[1] = &se_nacl->acl_auth_group; + nacl_cg->default_groups[2] = &se_nacl->acl_param_group; + nacl_cg->default_groups[3] = NULL; + + config_group_init_type_name(&se_nacl->acl_group, name, + &TF_CIT_TMPL(tf)->tfc_tpg_nacl_base_cit); + config_group_init_type_name(&se_nacl->acl_attrib_group, "attrib", + &TF_CIT_TMPL(tf)->tfc_tpg_nacl_attrib_cit); + config_group_init_type_name(&se_nacl->acl_auth_group, "auth", + &TF_CIT_TMPL(tf)->tfc_tpg_nacl_auth_cit); + config_group_init_type_name(&se_nacl->acl_param_group, "param", + &TF_CIT_TMPL(tf)->tfc_tpg_nacl_param_cit); + + return &se_nacl->acl_group; +} + +static void target_fabric_drop_nodeacl( + struct config_group *group, + struct config_item *item) +{ + struct se_portal_group *se_tpg = container_of(group, + struct se_portal_group, tpg_acl_group); + struct target_fabric_configfs *tf = se_tpg->se_tpg_wwn->wwn_tf; + struct se_node_acl *se_nacl = container_of(to_config_group(item), + struct se_node_acl, acl_group); + struct config_item *df_item; + struct config_group *nacl_cg; + int i; + + nacl_cg = &se_nacl->acl_group; + for (i = 0; nacl_cg->default_groups[i]; i++) { + df_item = &nacl_cg->default_groups[i]->cg_item; + nacl_cg->default_groups[i] = NULL; + config_item_put(df_item); + } + + config_item_put(item); + tf->tf_ops.fabric_drop_nodeacl(se_nacl); +} + +static struct configfs_group_operations target_fabric_nacl_group_ops = { + .make_group = target_fabric_make_nodeacl, + .drop_item = target_fabric_drop_nodeacl, +}; + +TF_CIT_SETUP(tpg_nacl, NULL, &target_fabric_nacl_group_ops, NULL); + +/* End of tfc_tpg_nacl_cit */ + +/* Start of tfc_tpg_np_base_cit */ + +CONFIGFS_EATTR_OPS(target_fabric_np_base, se_tpg_np, tpg_np_group); + +static struct configfs_item_operations target_fabric_np_base_item_ops = { + .show_attribute = target_fabric_np_base_attr_show, + .store_attribute = target_fabric_np_base_attr_store, +}; + +TF_CIT_SETUP(tpg_np_base, &target_fabric_np_base_item_ops, NULL, NULL); + +/* End of tfc_tpg_np_base_cit */ + +/* Start of tfc_tpg_np_cit */ + +static struct config_group *target_fabric_make_np( + struct config_group *group, + const char *name) +{ + struct se_portal_group *se_tpg = container_of(group, + struct se_portal_group, tpg_np_group); + struct target_fabric_configfs *tf = se_tpg->se_tpg_wwn->wwn_tf; + struct se_tpg_np *se_tpg_np; + + if (!(tf->tf_ops.fabric_make_np)) { + printk(KERN_ERR "tf->tf_ops.fabric_make_np is NULL\n"); + return ERR_PTR(-ENOSYS); + } + + se_tpg_np = tf->tf_ops.fabric_make_np(se_tpg, group, name); + if (!(se_tpg_np) || IS_ERR(se_tpg_np)) + return ERR_PTR(-EINVAL); + + config_group_init_type_name(&se_tpg_np->tpg_np_group, name, + &TF_CIT_TMPL(tf)->tfc_tpg_np_base_cit); + + return &se_tpg_np->tpg_np_group; +} + +static void target_fabric_drop_np( + struct config_group *group, + struct config_item *item) +{ + struct se_portal_group *se_tpg = container_of(group, + struct se_portal_group, tpg_np_group); + struct target_fabric_configfs *tf = se_tpg->se_tpg_wwn->wwn_tf; + struct se_tpg_np *se_tpg_np = container_of(to_config_group(item), + struct se_tpg_np, tpg_np_group); + + config_item_put(item); + tf->tf_ops.fabric_drop_np(se_tpg_np); +} + +static struct configfs_group_operations target_fabric_np_group_ops = { + .make_group = &target_fabric_make_np, + .drop_item = &target_fabric_drop_np, +}; + +TF_CIT_SETUP(tpg_np, NULL, &target_fabric_np_group_ops, NULL); + +/* End of tfc_tpg_np_cit */ + +/* Start of tfc_tpg_port_cit */ + +CONFIGFS_EATTR_STRUCT(target_fabric_port, se_lun); +#define TCM_PORT_ATTR(_name, _mode) \ +static struct target_fabric_port_attribute target_fabric_port_##_name = \ + __CONFIGFS_EATTR(_name, _mode, \ + target_fabric_port_show_attr_##_name, \ + target_fabric_port_store_attr_##_name); + +#define TCM_PORT_ATTOR_RO(_name) \ + __CONFIGFS_EATTR_RO(_name, \ + target_fabric_port_show_attr_##_name); + +/* + * alua_tg_pt_gp + */ +static ssize_t target_fabric_port_show_attr_alua_tg_pt_gp( + struct se_lun *lun, + char *page) +{ + if (!(lun)) + return -ENODEV; + + if (!(lun->lun_sep)) + return -ENODEV; + + return core_alua_show_tg_pt_gp_info(lun->lun_sep, page); +} + +static ssize_t target_fabric_port_store_attr_alua_tg_pt_gp( + struct se_lun *lun, + const char *page, + size_t count) +{ + if (!(lun)) + return -ENODEV; + + if (!(lun->lun_sep)) + return -ENODEV; + + return core_alua_store_tg_pt_gp_info(lun->lun_sep, page, count); +} + +TCM_PORT_ATTR(alua_tg_pt_gp, S_IRUGO | S_IWUSR); + +/* + * alua_tg_pt_offline + */ +static ssize_t target_fabric_port_show_attr_alua_tg_pt_offline( + struct se_lun *lun, + char *page) +{ + if (!(lun)) + return -ENODEV; + + if (!(lun->lun_sep)) + return -ENODEV; + + return core_alua_show_offline_bit(lun, page); +} + +static ssize_t target_fabric_port_store_attr_alua_tg_pt_offline( + struct se_lun *lun, + const char *page, + size_t count) +{ + if (!(lun)) + return -ENODEV; + + if (!(lun->lun_sep)) + return -ENODEV; + + return core_alua_store_offline_bit(lun, page, count); +} + +TCM_PORT_ATTR(alua_tg_pt_offline, S_IRUGO | S_IWUSR); + +/* + * alua_tg_pt_status + */ +static ssize_t target_fabric_port_show_attr_alua_tg_pt_status( + struct se_lun *lun, + char *page) +{ + if (!(lun)) + return -ENODEV; + + if (!(lun->lun_sep)) + return -ENODEV; + + return core_alua_show_secondary_status(lun, page); +} + +static ssize_t target_fabric_port_store_attr_alua_tg_pt_status( + struct se_lun *lun, + const char *page, + size_t count) +{ + if (!(lun)) + return -ENODEV; + + if (!(lun->lun_sep)) + return -ENODEV; + + return core_alua_store_secondary_status(lun, page, count); +} + +TCM_PORT_ATTR(alua_tg_pt_status, S_IRUGO | S_IWUSR); + +/* + * alua_tg_pt_write_md + */ +static ssize_t target_fabric_port_show_attr_alua_tg_pt_write_md( + struct se_lun *lun, + char *page) +{ + if (!(lun)) + return -ENODEV; + + if (!(lun->lun_sep)) + return -ENODEV; + + return core_alua_show_secondary_write_metadata(lun, page); +} + +static ssize_t target_fabric_port_store_attr_alua_tg_pt_write_md( + struct se_lun *lun, + const char *page, + size_t count) +{ + if (!(lun)) + return -ENODEV; + + if (!(lun->lun_sep)) + return -ENODEV; + + return core_alua_store_secondary_write_metadata(lun, page, count); +} + +TCM_PORT_ATTR(alua_tg_pt_write_md, S_IRUGO | S_IWUSR); + + +static struct configfs_attribute *target_fabric_port_attrs[] = { + &target_fabric_port_alua_tg_pt_gp.attr, + &target_fabric_port_alua_tg_pt_offline.attr, + &target_fabric_port_alua_tg_pt_status.attr, + &target_fabric_port_alua_tg_pt_write_md.attr, + NULL, +}; + +CONFIGFS_EATTR_OPS(target_fabric_port, se_lun, lun_group); + +static int target_fabric_port_link( + struct config_item *lun_ci, + struct config_item *se_dev_ci) +{ + struct config_item *tpg_ci; + struct se_device *dev; + struct se_lun *lun = container_of(to_config_group(lun_ci), + struct se_lun, lun_group); + struct se_lun *lun_p; + struct se_portal_group *se_tpg; + struct se_subsystem_dev *se_dev = container_of( + to_config_group(se_dev_ci), struct se_subsystem_dev, + se_dev_group); + struct target_fabric_configfs *tf; + int ret; + + tpg_ci = &lun_ci->ci_parent->ci_group->cg_item; + se_tpg = container_of(to_config_group(tpg_ci), + struct se_portal_group, tpg_group); + tf = se_tpg->se_tpg_wwn->wwn_tf; + + if (lun->lun_se_dev != NULL) { + printk(KERN_ERR "Port Symlink already exists\n"); + return -EEXIST; + } + + dev = se_dev->se_dev_ptr; + if (!(dev)) { + printk(KERN_ERR "Unable to locate struct se_device pointer from" + " %s\n", config_item_name(se_dev_ci)); + ret = -ENODEV; + goto out; + } + + lun_p = core_dev_add_lun(se_tpg, dev->se_hba, dev, + lun->unpacked_lun); + if ((IS_ERR(lun_p)) || !(lun_p)) { + printk(KERN_ERR "core_dev_add_lun() failed\n"); + ret = -EINVAL; + goto out; + } + + if (tf->tf_ops.fabric_post_link) { + /* + * Call the optional fabric_post_link() to allow a + * fabric module to setup any additional state once + * core_dev_add_lun() has been called.. + */ + tf->tf_ops.fabric_post_link(se_tpg, lun); + } + + return 0; +out: + return ret; +} + +static int target_fabric_port_unlink( + struct config_item *lun_ci, + struct config_item *se_dev_ci) +{ + struct se_lun *lun = container_of(to_config_group(lun_ci), + struct se_lun, lun_group); + struct se_portal_group *se_tpg = lun->lun_sep->sep_tpg; + struct target_fabric_configfs *tf = se_tpg->se_tpg_wwn->wwn_tf; + + if (tf->tf_ops.fabric_pre_unlink) { + /* + * Call the optional fabric_pre_unlink() to allow a + * fabric module to release any additional stat before + * core_dev_del_lun() is called. + */ + tf->tf_ops.fabric_pre_unlink(se_tpg, lun); + } + + core_dev_del_lun(se_tpg, lun->unpacked_lun); + return 0; +} + +static struct configfs_item_operations target_fabric_port_item_ops = { + .show_attribute = target_fabric_port_attr_show, + .store_attribute = target_fabric_port_attr_store, + .allow_link = target_fabric_port_link, + .drop_link = target_fabric_port_unlink, +}; + +TF_CIT_SETUP(tpg_port, &target_fabric_port_item_ops, NULL, target_fabric_port_attrs); + +/* End of tfc_tpg_port_cit */ + +/* Start of tfc_tpg_lun_cit */ + +static struct config_group *target_fabric_make_lun( + struct config_group *group, + const char *name) +{ + struct se_lun *lun; + struct se_portal_group *se_tpg = container_of(group, + struct se_portal_group, tpg_lun_group); + struct target_fabric_configfs *tf = se_tpg->se_tpg_wwn->wwn_tf; + unsigned long unpacked_lun; + + if (strstr(name, "lun_") != name) { + printk(KERN_ERR "Unable to locate \'_\" in" + " \"lun_$LUN_NUMBER\"\n"); + return ERR_PTR(-EINVAL); + } + if (strict_strtoul(name + 4, 0, &unpacked_lun) || unpacked_lun > UINT_MAX) + return ERR_PTR(-EINVAL); + + lun = core_get_lun_from_tpg(se_tpg, unpacked_lun); + if (!(lun)) + return ERR_PTR(-EINVAL); + + config_group_init_type_name(&lun->lun_group, name, + &TF_CIT_TMPL(tf)->tfc_tpg_port_cit); + + return &lun->lun_group; +} + +static void target_fabric_drop_lun( + struct config_group *group, + struct config_item *item) +{ + config_item_put(item); +} + +static struct configfs_group_operations target_fabric_lun_group_ops = { + .make_group = &target_fabric_make_lun, + .drop_item = &target_fabric_drop_lun, +}; + +TF_CIT_SETUP(tpg_lun, NULL, &target_fabric_lun_group_ops, NULL); + +/* End of tfc_tpg_lun_cit */ + +/* Start of tfc_tpg_attrib_cit */ + +CONFIGFS_EATTR_OPS(target_fabric_tpg_attrib, se_portal_group, tpg_attrib_group); + +static struct configfs_item_operations target_fabric_tpg_attrib_item_ops = { + .show_attribute = target_fabric_tpg_attrib_attr_show, + .store_attribute = target_fabric_tpg_attrib_attr_store, +}; + +TF_CIT_SETUP(tpg_attrib, &target_fabric_tpg_attrib_item_ops, NULL, NULL); + +/* End of tfc_tpg_attrib_cit */ + +/* Start of tfc_tpg_param_cit */ + +CONFIGFS_EATTR_OPS(target_fabric_tpg_param, se_portal_group, tpg_param_group); + +static struct configfs_item_operations target_fabric_tpg_param_item_ops = { + .show_attribute = target_fabric_tpg_param_attr_show, + .store_attribute = target_fabric_tpg_param_attr_store, +}; + +TF_CIT_SETUP(tpg_param, &target_fabric_tpg_param_item_ops, NULL, NULL); + +/* End of tfc_tpg_param_cit */ + +/* Start of tfc_tpg_base_cit */ +/* + * For use with TF_TPG_ATTR() and TF_TPG_ATTR_RO() + */ +CONFIGFS_EATTR_OPS(target_fabric_tpg, se_portal_group, tpg_group); + +static struct configfs_item_operations target_fabric_tpg_base_item_ops = { + .show_attribute = target_fabric_tpg_attr_show, + .store_attribute = target_fabric_tpg_attr_store, +}; + +TF_CIT_SETUP(tpg_base, &target_fabric_tpg_base_item_ops, NULL, NULL); + +/* End of tfc_tpg_base_cit */ + +/* Start of tfc_tpg_cit */ + +static struct config_group *target_fabric_make_tpg( + struct config_group *group, + const char *name) +{ + struct se_wwn *wwn = container_of(group, struct se_wwn, wwn_group); + struct target_fabric_configfs *tf = wwn->wwn_tf; + struct se_portal_group *se_tpg; + + if (!(tf->tf_ops.fabric_make_tpg)) { + printk(KERN_ERR "tf->tf_ops.fabric_make_tpg is NULL\n"); + return ERR_PTR(-ENOSYS); + } + + se_tpg = tf->tf_ops.fabric_make_tpg(wwn, group, name); + if (!(se_tpg) || IS_ERR(se_tpg)) + return ERR_PTR(-EINVAL); + /* + * Setup default groups from pre-allocated se_tpg->tpg_default_groups + */ + se_tpg->tpg_group.default_groups = se_tpg->tpg_default_groups; + se_tpg->tpg_group.default_groups[0] = &se_tpg->tpg_lun_group; + se_tpg->tpg_group.default_groups[1] = &se_tpg->tpg_np_group; + se_tpg->tpg_group.default_groups[2] = &se_tpg->tpg_acl_group; + se_tpg->tpg_group.default_groups[3] = &se_tpg->tpg_attrib_group; + se_tpg->tpg_group.default_groups[4] = &se_tpg->tpg_param_group; + se_tpg->tpg_group.default_groups[5] = NULL; + + config_group_init_type_name(&se_tpg->tpg_group, name, + &TF_CIT_TMPL(tf)->tfc_tpg_base_cit); + config_group_init_type_name(&se_tpg->tpg_lun_group, "lun", + &TF_CIT_TMPL(tf)->tfc_tpg_lun_cit); + config_group_init_type_name(&se_tpg->tpg_np_group, "np", + &TF_CIT_TMPL(tf)->tfc_tpg_np_cit); + config_group_init_type_name(&se_tpg->tpg_acl_group, "acls", + &TF_CIT_TMPL(tf)->tfc_tpg_nacl_cit); + config_group_init_type_name(&se_tpg->tpg_attrib_group, "attrib", + &TF_CIT_TMPL(tf)->tfc_tpg_attrib_cit); + config_group_init_type_name(&se_tpg->tpg_param_group, "param", + &TF_CIT_TMPL(tf)->tfc_tpg_param_cit); + + return &se_tpg->tpg_group; +} + +static void target_fabric_drop_tpg( + struct config_group *group, + struct config_item *item) +{ + struct se_wwn *wwn = container_of(group, struct se_wwn, wwn_group); + struct target_fabric_configfs *tf = wwn->wwn_tf; + struct se_portal_group *se_tpg = container_of(to_config_group(item), + struct se_portal_group, tpg_group); + struct config_group *tpg_cg = &se_tpg->tpg_group; + struct config_item *df_item; + int i; + /* + * Release default groups, but do not release tpg_cg->default_groups + * memory as it is statically allocated at se_tpg->tpg_default_groups. + */ + for (i = 0; tpg_cg->default_groups[i]; i++) { + df_item = &tpg_cg->default_groups[i]->cg_item; + tpg_cg->default_groups[i] = NULL; + config_item_put(df_item); + } + + config_item_put(item); + tf->tf_ops.fabric_drop_tpg(se_tpg); +} + +static struct configfs_group_operations target_fabric_tpg_group_ops = { + .make_group = target_fabric_make_tpg, + .drop_item = target_fabric_drop_tpg, +}; + +TF_CIT_SETUP(tpg, NULL, &target_fabric_tpg_group_ops, NULL); + +/* End of tfc_tpg_cit */ + +/* Start of tfc_wwn_cit */ + +static struct config_group *target_fabric_make_wwn( + struct config_group *group, + const char *name) +{ + struct target_fabric_configfs *tf = container_of(group, + struct target_fabric_configfs, tf_group); + struct se_wwn *wwn; + + if (!(tf->tf_ops.fabric_make_wwn)) { + printk(KERN_ERR "tf->tf_ops.fabric_make_wwn is NULL\n"); + return ERR_PTR(-ENOSYS); + } + + wwn = tf->tf_ops.fabric_make_wwn(tf, group, name); + if (!(wwn) || IS_ERR(wwn)) + return ERR_PTR(-EINVAL); + + wwn->wwn_tf = tf; + config_group_init_type_name(&wwn->wwn_group, name, + &TF_CIT_TMPL(tf)->tfc_tpg_cit); + + return &wwn->wwn_group; +} + +static void target_fabric_drop_wwn( + struct config_group *group, + struct config_item *item) +{ + struct target_fabric_configfs *tf = container_of(group, + struct target_fabric_configfs, tf_group); + struct se_wwn *wwn = container_of(to_config_group(item), + struct se_wwn, wwn_group); + + config_item_put(item); + tf->tf_ops.fabric_drop_wwn(wwn); +} + +static struct configfs_group_operations target_fabric_wwn_group_ops = { + .make_group = target_fabric_make_wwn, + .drop_item = target_fabric_drop_wwn, +}; +/* + * For use with TF_WWN_ATTR() and TF_WWN_ATTR_RO() + */ +CONFIGFS_EATTR_OPS(target_fabric_wwn, target_fabric_configfs, tf_group); + +static struct configfs_item_operations target_fabric_wwn_item_ops = { + .show_attribute = target_fabric_wwn_attr_show, + .store_attribute = target_fabric_wwn_attr_store, +}; + +TF_CIT_SETUP(wwn, &target_fabric_wwn_item_ops, &target_fabric_wwn_group_ops, NULL); + +/* End of tfc_wwn_cit */ + +/* Start of tfc_discovery_cit */ + +CONFIGFS_EATTR_OPS(target_fabric_discovery, target_fabric_configfs, + tf_disc_group); + +static struct configfs_item_operations target_fabric_discovery_item_ops = { + .show_attribute = target_fabric_discovery_attr_show, + .store_attribute = target_fabric_discovery_attr_store, +}; + +TF_CIT_SETUP(discovery, &target_fabric_discovery_item_ops, NULL, NULL); + +/* End of tfc_discovery_cit */ + +int target_fabric_setup_cits(struct target_fabric_configfs *tf) +{ + target_fabric_setup_discovery_cit(tf); + target_fabric_setup_wwn_cit(tf); + target_fabric_setup_tpg_cit(tf); + target_fabric_setup_tpg_base_cit(tf); + target_fabric_setup_tpg_port_cit(tf); + target_fabric_setup_tpg_lun_cit(tf); + target_fabric_setup_tpg_np_cit(tf); + target_fabric_setup_tpg_np_base_cit(tf); + target_fabric_setup_tpg_attrib_cit(tf); + target_fabric_setup_tpg_param_cit(tf); + target_fabric_setup_tpg_nacl_cit(tf); + target_fabric_setup_tpg_nacl_base_cit(tf); + target_fabric_setup_tpg_nacl_attrib_cit(tf); + target_fabric_setup_tpg_nacl_auth_cit(tf); + target_fabric_setup_tpg_nacl_param_cit(tf); + target_fabric_setup_tpg_mappedlun_cit(tf); + + return 0; +} diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c new file mode 100644 index 000000000000..26285644e4de --- /dev/null +++ b/drivers/target/target_core_fabric_lib.c @@ -0,0 +1,451 @@ +/******************************************************************************* + * Filename: target_core_fabric_lib.c + * + * This file contains generic high level protocol identifier and PR + * handlers for TCM fabric modules + * + * Copyright (c) 2010 Rising Tide Systems, Inc. + * Copyright (c) 2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ******************************************************************************/ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "target_core_hba.h" +#include "target_core_pr.h" + +/* + * Handlers for Serial Attached SCSI (SAS) + */ +u8 sas_get_fabric_proto_ident(struct se_portal_group *se_tpg) +{ + /* + * Return a SAS Serial SCSI Protocol identifier for loopback operations + * This is defined in section 7.5.1 Table 362 in spc4r17 + */ + return 0x6; +} +EXPORT_SYMBOL(sas_get_fabric_proto_ident); + +u32 sas_get_pr_transport_id( + struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int *format_code, + unsigned char *buf) +{ + unsigned char binary, *ptr; + int i; + u32 off = 4; + /* + * Set PROTOCOL IDENTIFIER to 6h for SAS + */ + buf[0] = 0x06; + /* + * From spc4r17, 7.5.4.7 TransportID for initiator ports using SCSI + * over SAS Serial SCSI Protocol + */ + ptr = &se_nacl->initiatorname[4]; /* Skip over 'naa. prefix */ + + for (i = 0; i < 16; i += 2) { + binary = transport_asciihex_to_binaryhex(&ptr[i]); + buf[off++] = binary; + } + /* + * The SAS Transport ID is a hardcoded 24-byte length + */ + return 24; +} +EXPORT_SYMBOL(sas_get_pr_transport_id); + +u32 sas_get_pr_transport_id_len( + struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int *format_code) +{ + *format_code = 0; + /* + * From spc4r17, 7.5.4.7 TransportID for initiator ports using SCSI + * over SAS Serial SCSI Protocol + * + * The SAS Transport ID is a hardcoded 24-byte length + */ + return 24; +} +EXPORT_SYMBOL(sas_get_pr_transport_id_len); + +/* + * Used for handling SCSI fabric dependent TransportIDs in SPC-3 and above + * Persistent Reservation SPEC_I_PT=1 and PROUT REGISTER_AND_MOVE operations. + */ +char *sas_parse_pr_out_transport_id( + struct se_portal_group *se_tpg, + const char *buf, + u32 *out_tid_len, + char **port_nexus_ptr) +{ + /* + * Assume the FORMAT CODE 00b from spc4r17, 7.5.4.7 TransportID + * for initiator ports using SCSI over SAS Serial SCSI Protocol + * + * The TransportID for a SAS Initiator Port is of fixed size of + * 24 bytes, and SAS does not contain a I_T nexus identifier, + * so we return the **port_nexus_ptr set to NULL. + */ + *port_nexus_ptr = NULL; + *out_tid_len = 24; + + return (char *)&buf[4]; +} +EXPORT_SYMBOL(sas_parse_pr_out_transport_id); + +/* + * Handlers for Fibre Channel Protocol (FCP) + */ +u8 fc_get_fabric_proto_ident(struct se_portal_group *se_tpg) +{ + return 0x0; /* 0 = fcp-2 per SPC4 section 7.5.1 */ +} +EXPORT_SYMBOL(fc_get_fabric_proto_ident); + +u32 fc_get_pr_transport_id_len( + struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int *format_code) +{ + *format_code = 0; + /* + * The FC Transport ID is a hardcoded 24-byte length + */ + return 24; +} +EXPORT_SYMBOL(fc_get_pr_transport_id_len); + +u32 fc_get_pr_transport_id( + struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int *format_code, + unsigned char *buf) +{ + unsigned char binary, *ptr; + int i; + u32 off = 8; + /* + * PROTOCOL IDENTIFIER is 0h for FCP-2 + * + * From spc4r17, 7.5.4.2 TransportID for initiator ports using + * SCSI over Fibre Channel + * + * We convert the ASCII formatted N Port name into a binary + * encoded TransportID. + */ + ptr = &se_nacl->initiatorname[0]; + + for (i = 0; i < 24; ) { + if (!(strncmp(&ptr[i], ":", 1))) { + i++; + continue; + } + binary = transport_asciihex_to_binaryhex(&ptr[i]); + buf[off++] = binary; + i += 2; + } + /* + * The FC Transport ID is a hardcoded 24-byte length + */ + return 24; +} +EXPORT_SYMBOL(fc_get_pr_transport_id); + +char *fc_parse_pr_out_transport_id( + struct se_portal_group *se_tpg, + const char *buf, + u32 *out_tid_len, + char **port_nexus_ptr) +{ + /* + * The TransportID for a FC N Port is of fixed size of + * 24 bytes, and FC does not contain a I_T nexus identifier, + * so we return the **port_nexus_ptr set to NULL. + */ + *port_nexus_ptr = NULL; + *out_tid_len = 24; + + return (char *)&buf[8]; +} +EXPORT_SYMBOL(fc_parse_pr_out_transport_id); + +/* + * Handlers for Internet Small Computer Systems Interface (iSCSI) + */ + +u8 iscsi_get_fabric_proto_ident(struct se_portal_group *se_tpg) +{ + /* + * This value is defined for "Internet SCSI (iSCSI)" + * in spc4r17 section 7.5.1 Table 362 + */ + return 0x5; +} +EXPORT_SYMBOL(iscsi_get_fabric_proto_ident); + +u32 iscsi_get_pr_transport_id( + struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int *format_code, + unsigned char *buf) +{ + u32 off = 4, padding = 0; + u16 len = 0; + + spin_lock_irq(&se_nacl->nacl_sess_lock); + /* + * Set PROTOCOL IDENTIFIER to 5h for iSCSI + */ + buf[0] = 0x05; + /* + * From spc4r17 Section 7.5.4.6: TransportID for initiator + * ports using SCSI over iSCSI. + * + * The null-terminated, null-padded (see 4.4.2) ISCSI NAME field + * shall contain the iSCSI name of an iSCSI initiator node (see + * RFC 3720). The first ISCSI NAME field byte containing an ASCII + * null character terminates the ISCSI NAME field without regard for + * the specified length of the iSCSI TransportID or the contents of + * the ADDITIONAL LENGTH field. + */ + len = sprintf(&buf[off], "%s", se_nacl->initiatorname); + /* + * Add Extra byte for NULL terminator + */ + len++; + /* + * If there is ISID present with the registration and *format code == 1 + * 1, use iSCSI Initiator port TransportID format. + * + * Otherwise use iSCSI Initiator device TransportID format that + * does not contain the ASCII encoded iSCSI Initiator iSID value + * provied by the iSCSi Initiator during the iSCSI login process. + */ + if ((*format_code == 1) && (pr_reg->isid_present_at_reg)) { + /* + * Set FORMAT CODE 01b for iSCSI Initiator port TransportID + * format. + */ + buf[0] |= 0x40; + /* + * From spc4r17 Section 7.5.4.6: TransportID for initiator + * ports using SCSI over iSCSI. Table 390 + * + * The SEPARATOR field shall contain the five ASCII + * characters ",i,0x". + * + * The null-terminated, null-padded ISCSI INITIATOR SESSION ID + * field shall contain the iSCSI initiator session identifier + * (see RFC 3720) in the form of ASCII characters that are the + * hexadecimal digits converted from the binary iSCSI initiator + * session identifier value. The first ISCSI INITIATOR SESSION + * ID field byte containing an ASCII null character + */ + buf[off+len] = 0x2c; off++; /* ASCII Character: "," */ + buf[off+len] = 0x69; off++; /* ASCII Character: "i" */ + buf[off+len] = 0x2c; off++; /* ASCII Character: "," */ + buf[off+len] = 0x30; off++; /* ASCII Character: "0" */ + buf[off+len] = 0x78; off++; /* ASCII Character: "x" */ + len += 5; + buf[off+len] = pr_reg->pr_reg_isid[0]; off++; + buf[off+len] = pr_reg->pr_reg_isid[1]; off++; + buf[off+len] = pr_reg->pr_reg_isid[2]; off++; + buf[off+len] = pr_reg->pr_reg_isid[3]; off++; + buf[off+len] = pr_reg->pr_reg_isid[4]; off++; + buf[off+len] = pr_reg->pr_reg_isid[5]; off++; + buf[off+len] = '\0'; off++; + len += 7; + } + spin_unlock_irq(&se_nacl->nacl_sess_lock); + /* + * The ADDITIONAL LENGTH field specifies the number of bytes that follow + * in the TransportID. The additional length shall be at least 20 and + * shall be a multiple of four. + */ + padding = ((-len) & 3); + if (padding != 0) + len += padding; + + buf[2] = ((len >> 8) & 0xff); + buf[3] = (len & 0xff); + /* + * Increment value for total payload + header length for + * full status descriptor + */ + len += 4; + + return len; +} +EXPORT_SYMBOL(iscsi_get_pr_transport_id); + +u32 iscsi_get_pr_transport_id_len( + struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int *format_code) +{ + u32 len = 0, padding = 0; + + spin_lock_irq(&se_nacl->nacl_sess_lock); + len = strlen(se_nacl->initiatorname); + /* + * Add extra byte for NULL terminator + */ + len++; + /* + * If there is ISID present with the registration, use format code: + * 01b: iSCSI Initiator port TransportID format + * + * If there is not an active iSCSI session, use format code: + * 00b: iSCSI Initiator device TransportID format + */ + if (pr_reg->isid_present_at_reg) { + len += 5; /* For ",i,0x" ASCII seperator */ + len += 7; /* For iSCSI Initiator Session ID + Null terminator */ + *format_code = 1; + } else + *format_code = 0; + spin_unlock_irq(&se_nacl->nacl_sess_lock); + /* + * The ADDITIONAL LENGTH field specifies the number of bytes that follow + * in the TransportID. The additional length shall be at least 20 and + * shall be a multiple of four. + */ + padding = ((-len) & 3); + if (padding != 0) + len += padding; + /* + * Increment value for total payload + header length for + * full status descriptor + */ + len += 4; + + return len; +} +EXPORT_SYMBOL(iscsi_get_pr_transport_id_len); + +char *iscsi_parse_pr_out_transport_id( + struct se_portal_group *se_tpg, + const char *buf, + u32 *out_tid_len, + char **port_nexus_ptr) +{ + char *p; + u32 tid_len, padding; + int i; + u16 add_len; + u8 format_code = (buf[0] & 0xc0); + /* + * Check for FORMAT CODE 00b or 01b from spc4r17, section 7.5.4.6: + * + * TransportID for initiator ports using SCSI over iSCSI, + * from Table 388 -- iSCSI TransportID formats. + * + * 00b Initiator port is identified using the world wide unique + * SCSI device name of the iSCSI initiator + * device containing the initiator port (see table 389). + * 01b Initiator port is identified using the world wide unique + * initiator port identifier (see table 390).10b to 11b + * Reserved + */ + if ((format_code != 0x00) && (format_code != 0x40)) { + printk(KERN_ERR "Illegal format code: 0x%02x for iSCSI" + " Initiator Transport ID\n", format_code); + return NULL; + } + /* + * If the caller wants the TransportID Length, we set that value for the + * entire iSCSI Tarnsport ID now. + */ + if (out_tid_len != NULL) { + add_len = ((buf[2] >> 8) & 0xff); + add_len |= (buf[3] & 0xff); + + tid_len = strlen((char *)&buf[4]); + tid_len += 4; /* Add four bytes for iSCSI Transport ID header */ + tid_len += 1; /* Add one byte for NULL terminator */ + padding = ((-tid_len) & 3); + if (padding != 0) + tid_len += padding; + + if ((add_len + 4) != tid_len) { + printk(KERN_INFO "LIO-Target Extracted add_len: %hu " + "does not match calculated tid_len: %u," + " using tid_len instead\n", add_len+4, tid_len); + *out_tid_len = tid_len; + } else + *out_tid_len = (add_len + 4); + } + /* + * Check for ',i,0x' seperator between iSCSI Name and iSCSI Initiator + * Session ID as defined in Table 390 - iSCSI initiator port TransportID + * format. + */ + if (format_code == 0x40) { + p = strstr((char *)&buf[4], ",i,0x"); + if (!(p)) { + printk(KERN_ERR "Unable to locate \",i,0x\" seperator" + " for Initiator port identifier: %s\n", + (char *)&buf[4]); + return NULL; + } + *p = '\0'; /* Terminate iSCSI Name */ + p += 5; /* Skip over ",i,0x" seperator */ + + *port_nexus_ptr = p; + /* + * Go ahead and do the lower case conversion of the received + * 12 ASCII characters representing the ISID in the TransportID + * for comparision against the running iSCSI session's ISID from + * iscsi_target.c:lio_sess_get_initiator_sid() + */ + for (i = 0; i < 12; i++) { + if (isdigit(*p)) { + p++; + continue; + } + *p = tolower(*p); + p++; + } + } + + return (char *)&buf[4]; +} +EXPORT_SYMBOL(iscsi_parse_pr_out_transport_id); diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c new file mode 100644 index 000000000000..0aaca885668f --- /dev/null +++ b/drivers/target/target_core_file.c @@ -0,0 +1,688 @@ +/******************************************************************************* + * Filename: target_core_file.c + * + * This file contains the Storage Engine <-> FILEIO transport specific functions + * + * Copyright (c) 2005 PyX Technologies, Inc. + * Copyright (c) 2005-2006 SBE, Inc. All Rights Reserved. + * Copyright (c) 2007-2010 Rising Tide Systems + * Copyright (c) 2008-2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ******************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "target_core_file.h" + +#if 1 +#define DEBUG_FD_CACHE(x...) printk(x) +#else +#define DEBUG_FD_CACHE(x...) +#endif + +#if 1 +#define DEBUG_FD_FUA(x...) printk(x) +#else +#define DEBUG_FD_FUA(x...) +#endif + +static struct se_subsystem_api fileio_template; + +/* fd_attach_hba(): (Part of se_subsystem_api_t template) + * + * + */ +static int fd_attach_hba(struct se_hba *hba, u32 host_id) +{ + struct fd_host *fd_host; + + fd_host = kzalloc(sizeof(struct fd_host), GFP_KERNEL); + if (!(fd_host)) { + printk(KERN_ERR "Unable to allocate memory for struct fd_host\n"); + return -1; + } + + fd_host->fd_host_id = host_id; + + atomic_set(&hba->left_queue_depth, FD_HBA_QUEUE_DEPTH); + atomic_set(&hba->max_queue_depth, FD_HBA_QUEUE_DEPTH); + hba->hba_ptr = (void *) fd_host; + + printk(KERN_INFO "CORE_HBA[%d] - TCM FILEIO HBA Driver %s on Generic" + " Target Core Stack %s\n", hba->hba_id, FD_VERSION, + TARGET_CORE_MOD_VERSION); + printk(KERN_INFO "CORE_HBA[%d] - Attached FILEIO HBA: %u to Generic" + " Target Core with TCQ Depth: %d MaxSectors: %u\n", + hba->hba_id, fd_host->fd_host_id, + atomic_read(&hba->max_queue_depth), FD_MAX_SECTORS); + + return 0; +} + +static void fd_detach_hba(struct se_hba *hba) +{ + struct fd_host *fd_host = hba->hba_ptr; + + printk(KERN_INFO "CORE_HBA[%d] - Detached FILEIO HBA: %u from Generic" + " Target Core\n", hba->hba_id, fd_host->fd_host_id); + + kfree(fd_host); + hba->hba_ptr = NULL; +} + +static void *fd_allocate_virtdevice(struct se_hba *hba, const char *name) +{ + struct fd_dev *fd_dev; + struct fd_host *fd_host = (struct fd_host *) hba->hba_ptr; + + fd_dev = kzalloc(sizeof(struct fd_dev), GFP_KERNEL); + if (!(fd_dev)) { + printk(KERN_ERR "Unable to allocate memory for struct fd_dev\n"); + return NULL; + } + + fd_dev->fd_host = fd_host; + + printk(KERN_INFO "FILEIO: Allocated fd_dev for %p\n", name); + + return fd_dev; +} + +/* fd_create_virtdevice(): (Part of se_subsystem_api_t template) + * + * + */ +static struct se_device *fd_create_virtdevice( + struct se_hba *hba, + struct se_subsystem_dev *se_dev, + void *p) +{ + char *dev_p = NULL; + struct se_device *dev; + struct se_dev_limits dev_limits; + struct queue_limits *limits; + struct fd_dev *fd_dev = (struct fd_dev *) p; + struct fd_host *fd_host = (struct fd_host *) hba->hba_ptr; + mm_segment_t old_fs; + struct file *file; + struct inode *inode = NULL; + int dev_flags = 0, flags; + + memset(&dev_limits, 0, sizeof(struct se_dev_limits)); + + old_fs = get_fs(); + set_fs(get_ds()); + dev_p = getname(fd_dev->fd_dev_name); + set_fs(old_fs); + + if (IS_ERR(dev_p)) { + printk(KERN_ERR "getname(%s) failed: %lu\n", + fd_dev->fd_dev_name, IS_ERR(dev_p)); + goto fail; + } +#if 0 + if (di->no_create_file) + flags = O_RDWR | O_LARGEFILE; + else + flags = O_RDWR | O_CREAT | O_LARGEFILE; +#else + flags = O_RDWR | O_CREAT | O_LARGEFILE; +#endif +/* flags |= O_DIRECT; */ + /* + * If fd_buffered_io=1 has not been set explictly (the default), + * use O_SYNC to force FILEIO writes to disk. + */ + if (!(fd_dev->fbd_flags & FDBD_USE_BUFFERED_IO)) + flags |= O_SYNC; + + file = filp_open(dev_p, flags, 0600); + + if (IS_ERR(file) || !file || !file->f_dentry) { + printk(KERN_ERR "filp_open(%s) failed\n", dev_p); + goto fail; + } + fd_dev->fd_file = file; + /* + * If using a block backend with this struct file, we extract + * fd_dev->fd_[block,dev]_size from struct block_device. + * + * Otherwise, we use the passed fd_size= from configfs + */ + inode = file->f_mapping->host; + if (S_ISBLK(inode->i_mode)) { + struct request_queue *q; + /* + * Setup the local scope queue_limits from struct request_queue->limits + * to pass into transport_add_device_to_core_hba() as struct se_dev_limits. + */ + q = bdev_get_queue(inode->i_bdev); + limits = &dev_limits.limits; + limits->logical_block_size = bdev_logical_block_size(inode->i_bdev); + limits->max_hw_sectors = queue_max_hw_sectors(q); + limits->max_sectors = queue_max_sectors(q); + /* + * Determine the number of bytes from i_size_read() minus + * one (1) logical sector from underlying struct block_device + */ + fd_dev->fd_block_size = bdev_logical_block_size(inode->i_bdev); + fd_dev->fd_dev_size = (i_size_read(file->f_mapping->host) - + fd_dev->fd_block_size); + + printk(KERN_INFO "FILEIO: Using size: %llu bytes from struct" + " block_device blocks: %llu logical_block_size: %d\n", + fd_dev->fd_dev_size, + div_u64(fd_dev->fd_dev_size, fd_dev->fd_block_size), + fd_dev->fd_block_size); + } else { + if (!(fd_dev->fbd_flags & FBDF_HAS_SIZE)) { + printk(KERN_ERR "FILEIO: Missing fd_dev_size=" + " parameter, and no backing struct" + " block_device\n"); + goto fail; + } + + limits = &dev_limits.limits; + limits->logical_block_size = FD_BLOCKSIZE; + limits->max_hw_sectors = FD_MAX_SECTORS; + limits->max_sectors = FD_MAX_SECTORS; + fd_dev->fd_block_size = FD_BLOCKSIZE; + } + + dev_limits.hw_queue_depth = FD_MAX_DEVICE_QUEUE_DEPTH; + dev_limits.queue_depth = FD_DEVICE_QUEUE_DEPTH; + + dev = transport_add_device_to_core_hba(hba, &fileio_template, + se_dev, dev_flags, (void *)fd_dev, + &dev_limits, "FILEIO", FD_VERSION); + if (!(dev)) + goto fail; + + fd_dev->fd_dev_id = fd_host->fd_host_dev_id_count++; + fd_dev->fd_queue_depth = dev->queue_depth; + + printk(KERN_INFO "CORE_FILE[%u] - Added TCM FILEIO Device ID: %u at %s," + " %llu total bytes\n", fd_host->fd_host_id, fd_dev->fd_dev_id, + fd_dev->fd_dev_name, fd_dev->fd_dev_size); + + putname(dev_p); + return dev; +fail: + if (fd_dev->fd_file) { + filp_close(fd_dev->fd_file, NULL); + fd_dev->fd_file = NULL; + } + putname(dev_p); + return NULL; +} + +/* fd_free_device(): (Part of se_subsystem_api_t template) + * + * + */ +static void fd_free_device(void *p) +{ + struct fd_dev *fd_dev = (struct fd_dev *) p; + + if (fd_dev->fd_file) { + filp_close(fd_dev->fd_file, NULL); + fd_dev->fd_file = NULL; + } + + kfree(fd_dev); +} + +static inline struct fd_request *FILE_REQ(struct se_task *task) +{ + return container_of(task, struct fd_request, fd_task); +} + + +static struct se_task * +fd_alloc_task(struct se_cmd *cmd) +{ + struct fd_request *fd_req; + + fd_req = kzalloc(sizeof(struct fd_request), GFP_KERNEL); + if (!(fd_req)) { + printk(KERN_ERR "Unable to allocate struct fd_request\n"); + return NULL; + } + + fd_req->fd_dev = SE_DEV(cmd)->dev_ptr; + + return &fd_req->fd_task; +} + +static int fd_do_readv(struct se_task *task) +{ + struct fd_request *req = FILE_REQ(task); + struct file *fd = req->fd_dev->fd_file; + struct scatterlist *sg = task->task_sg; + struct iovec *iov; + mm_segment_t old_fs; + loff_t pos = (task->task_lba * DEV_ATTRIB(task->se_dev)->block_size); + int ret = 0, i; + + iov = kzalloc(sizeof(struct iovec) * task->task_sg_num, GFP_KERNEL); + if (!(iov)) { + printk(KERN_ERR "Unable to allocate fd_do_readv iov[]\n"); + return -1; + } + + for (i = 0; i < task->task_sg_num; i++) { + iov[i].iov_len = sg[i].length; + iov[i].iov_base = sg_virt(&sg[i]); + } + + old_fs = get_fs(); + set_fs(get_ds()); + ret = vfs_readv(fd, &iov[0], task->task_sg_num, &pos); + set_fs(old_fs); + + kfree(iov); + /* + * Return zeros and GOOD status even if the READ did not return + * the expected virt_size for struct file w/o a backing struct + * block_device. + */ + if (S_ISBLK(fd->f_dentry->d_inode->i_mode)) { + if (ret < 0 || ret != task->task_size) { + printk(KERN_ERR "vfs_readv() returned %d," + " expecting %d for S_ISBLK\n", ret, + (int)task->task_size); + return -1; + } + } else { + if (ret < 0) { + printk(KERN_ERR "vfs_readv() returned %d for non" + " S_ISBLK\n", ret); + return -1; + } + } + + return 1; +} + +static int fd_do_writev(struct se_task *task) +{ + struct fd_request *req = FILE_REQ(task); + struct file *fd = req->fd_dev->fd_file; + struct scatterlist *sg = task->task_sg; + struct iovec *iov; + mm_segment_t old_fs; + loff_t pos = (task->task_lba * DEV_ATTRIB(task->se_dev)->block_size); + int ret, i = 0; + + iov = kzalloc(sizeof(struct iovec) * task->task_sg_num, GFP_KERNEL); + if (!(iov)) { + printk(KERN_ERR "Unable to allocate fd_do_writev iov[]\n"); + return -1; + } + + for (i = 0; i < task->task_sg_num; i++) { + iov[i].iov_len = sg[i].length; + iov[i].iov_base = sg_virt(&sg[i]); + } + + old_fs = get_fs(); + set_fs(get_ds()); + ret = vfs_writev(fd, &iov[0], task->task_sg_num, &pos); + set_fs(old_fs); + + kfree(iov); + + if (ret < 0 || ret != task->task_size) { + printk(KERN_ERR "vfs_writev() returned %d\n", ret); + return -1; + } + + return 1; +} + +static void fd_emulate_sync_cache(struct se_task *task) +{ + struct se_cmd *cmd = TASK_CMD(task); + struct se_device *dev = cmd->se_dev; + struct fd_dev *fd_dev = dev->dev_ptr; + int immed = (cmd->t_task->t_task_cdb[1] & 0x2); + loff_t start, end; + int ret; + + /* + * If the Immediate bit is set, queue up the GOOD response + * for this SYNCHRONIZE_CACHE op + */ + if (immed) + transport_complete_sync_cache(cmd, 1); + + /* + * Determine if we will be flushing the entire device. + */ + if (cmd->t_task->t_task_lba == 0 && cmd->data_length == 0) { + start = 0; + end = LLONG_MAX; + } else { + start = cmd->t_task->t_task_lba * DEV_ATTRIB(dev)->block_size; + if (cmd->data_length) + end = start + cmd->data_length; + else + end = LLONG_MAX; + } + + ret = vfs_fsync_range(fd_dev->fd_file, start, end, 1); + if (ret != 0) + printk(KERN_ERR "FILEIO: vfs_fsync_range() failed: %d\n", ret); + + if (!immed) + transport_complete_sync_cache(cmd, ret == 0); +} + +/* + * Tell TCM Core that we are capable of WriteCache emulation for + * an underlying struct se_device. + */ +static int fd_emulated_write_cache(struct se_device *dev) +{ + return 1; +} + +static int fd_emulated_dpo(struct se_device *dev) +{ + return 0; +} +/* + * Tell TCM Core that we will be emulating Forced Unit Access (FUA) for WRITEs + * for TYPE_DISK. + */ +static int fd_emulated_fua_write(struct se_device *dev) +{ + return 1; +} + +static int fd_emulated_fua_read(struct se_device *dev) +{ + return 0; +} + +/* + * WRITE Force Unit Access (FUA) emulation on a per struct se_task + * LBA range basis.. + */ +static void fd_emulate_write_fua(struct se_cmd *cmd, struct se_task *task) +{ + struct se_device *dev = cmd->se_dev; + struct fd_dev *fd_dev = dev->dev_ptr; + loff_t start = task->task_lba * DEV_ATTRIB(dev)->block_size; + loff_t end = start + task->task_size; + int ret; + + DEBUG_FD_CACHE("FILEIO: FUA WRITE LBA: %llu, bytes: %u\n", + task->task_lba, task->task_size); + + ret = vfs_fsync_range(fd_dev->fd_file, start, end, 1); + if (ret != 0) + printk(KERN_ERR "FILEIO: vfs_fsync_range() failed: %d\n", ret); +} + +static int fd_do_task(struct se_task *task) +{ + struct se_cmd *cmd = task->task_se_cmd; + struct se_device *dev = cmd->se_dev; + int ret = 0; + + /* + * Call vectorized fileio functions to map struct scatterlist + * physical memory addresses to struct iovec virtual memory. + */ + if (task->task_data_direction == DMA_FROM_DEVICE) { + ret = fd_do_readv(task); + } else { + ret = fd_do_writev(task); + + if (ret > 0 && + DEV_ATTRIB(dev)->emulate_write_cache > 0 && + DEV_ATTRIB(dev)->emulate_fua_write > 0 && + T_TASK(cmd)->t_tasks_fua) { + /* + * We might need to be a bit smarter here + * and return some sense data to let the initiator + * know the FUA WRITE cache sync failed..? + */ + fd_emulate_write_fua(cmd, task); + } + + } + + if (ret < 0) + return ret; + if (ret) { + task->task_scsi_status = GOOD; + transport_complete_task(task, 1); + } + return PYX_TRANSPORT_SENT_TO_TRANSPORT; +} + +/* fd_free_task(): (Part of se_subsystem_api_t template) + * + * + */ +static void fd_free_task(struct se_task *task) +{ + struct fd_request *req = FILE_REQ(task); + + kfree(req); +} + +enum { + Opt_fd_dev_name, Opt_fd_dev_size, Opt_fd_buffered_io, Opt_err +}; + +static match_table_t tokens = { + {Opt_fd_dev_name, "fd_dev_name=%s"}, + {Opt_fd_dev_size, "fd_dev_size=%s"}, + {Opt_fd_buffered_io, "fd_buffered_id=%d"}, + {Opt_err, NULL} +}; + +static ssize_t fd_set_configfs_dev_params( + struct se_hba *hba, + struct se_subsystem_dev *se_dev, + const char *page, ssize_t count) +{ + struct fd_dev *fd_dev = se_dev->se_dev_su_ptr; + char *orig, *ptr, *arg_p, *opts; + substring_t args[MAX_OPT_ARGS]; + int ret = 0, arg, token; + + opts = kstrdup(page, GFP_KERNEL); + if (!opts) + return -ENOMEM; + + orig = opts; + + while ((ptr = strsep(&opts, ",")) != NULL) { + if (!*ptr) + continue; + + token = match_token(ptr, tokens, args); + switch (token) { + case Opt_fd_dev_name: + snprintf(fd_dev->fd_dev_name, FD_MAX_DEV_NAME, + "%s", match_strdup(&args[0])); + printk(KERN_INFO "FILEIO: Referencing Path: %s\n", + fd_dev->fd_dev_name); + fd_dev->fbd_flags |= FBDF_HAS_PATH; + break; + case Opt_fd_dev_size: + arg_p = match_strdup(&args[0]); + ret = strict_strtoull(arg_p, 0, &fd_dev->fd_dev_size); + if (ret < 0) { + printk(KERN_ERR "strict_strtoull() failed for" + " fd_dev_size=\n"); + goto out; + } + printk(KERN_INFO "FILEIO: Referencing Size: %llu" + " bytes\n", fd_dev->fd_dev_size); + fd_dev->fbd_flags |= FBDF_HAS_SIZE; + break; + case Opt_fd_buffered_io: + match_int(args, &arg); + if (arg != 1) { + printk(KERN_ERR "bogus fd_buffered_io=%d value\n", arg); + ret = -EINVAL; + goto out; + } + + printk(KERN_INFO "FILEIO: Using buffered I/O" + " operations for struct fd_dev\n"); + + fd_dev->fbd_flags |= FDBD_USE_BUFFERED_IO; + break; + default: + break; + } + } + +out: + kfree(orig); + return (!ret) ? count : ret; +} + +static ssize_t fd_check_configfs_dev_params(struct se_hba *hba, struct se_subsystem_dev *se_dev) +{ + struct fd_dev *fd_dev = (struct fd_dev *) se_dev->se_dev_su_ptr; + + if (!(fd_dev->fbd_flags & FBDF_HAS_PATH)) { + printk(KERN_ERR "Missing fd_dev_name=\n"); + return -1; + } + + return 0; +} + +static ssize_t fd_show_configfs_dev_params( + struct se_hba *hba, + struct se_subsystem_dev *se_dev, + char *b) +{ + struct fd_dev *fd_dev = se_dev->se_dev_su_ptr; + ssize_t bl = 0; + + bl = sprintf(b + bl, "TCM FILEIO ID: %u", fd_dev->fd_dev_id); + bl += sprintf(b + bl, " File: %s Size: %llu Mode: %s\n", + fd_dev->fd_dev_name, fd_dev->fd_dev_size, + (fd_dev->fbd_flags & FDBD_USE_BUFFERED_IO) ? + "Buffered" : "Synchronous"); + return bl; +} + +/* fd_get_cdb(): (Part of se_subsystem_api_t template) + * + * + */ +static unsigned char *fd_get_cdb(struct se_task *task) +{ + struct fd_request *req = FILE_REQ(task); + + return req->fd_scsi_cdb; +} + +/* fd_get_device_rev(): (Part of se_subsystem_api_t template) + * + * + */ +static u32 fd_get_device_rev(struct se_device *dev) +{ + return SCSI_SPC_2; /* Returns SPC-3 in Initiator Data */ +} + +/* fd_get_device_type(): (Part of se_subsystem_api_t template) + * + * + */ +static u32 fd_get_device_type(struct se_device *dev) +{ + return TYPE_DISK; +} + +static sector_t fd_get_blocks(struct se_device *dev) +{ + struct fd_dev *fd_dev = dev->dev_ptr; + unsigned long long blocks_long = div_u64(fd_dev->fd_dev_size, + DEV_ATTRIB(dev)->block_size); + + return blocks_long; +} + +static struct se_subsystem_api fileio_template = { + .name = "fileio", + .owner = THIS_MODULE, + .transport_type = TRANSPORT_PLUGIN_VHBA_PDEV, + .attach_hba = fd_attach_hba, + .detach_hba = fd_detach_hba, + .allocate_virtdevice = fd_allocate_virtdevice, + .create_virtdevice = fd_create_virtdevice, + .free_device = fd_free_device, + .dpo_emulated = fd_emulated_dpo, + .fua_write_emulated = fd_emulated_fua_write, + .fua_read_emulated = fd_emulated_fua_read, + .write_cache_emulated = fd_emulated_write_cache, + .alloc_task = fd_alloc_task, + .do_task = fd_do_task, + .do_sync_cache = fd_emulate_sync_cache, + .free_task = fd_free_task, + .check_configfs_dev_params = fd_check_configfs_dev_params, + .set_configfs_dev_params = fd_set_configfs_dev_params, + .show_configfs_dev_params = fd_show_configfs_dev_params, + .get_cdb = fd_get_cdb, + .get_device_rev = fd_get_device_rev, + .get_device_type = fd_get_device_type, + .get_blocks = fd_get_blocks, +}; + +static int __init fileio_module_init(void) +{ + return transport_subsystem_register(&fileio_template); +} + +static void fileio_module_exit(void) +{ + transport_subsystem_release(&fileio_template); +} + +MODULE_DESCRIPTION("TCM FILEIO subsystem plugin"); +MODULE_AUTHOR("nab@Linux-iSCSI.org"); +MODULE_LICENSE("GPL"); + +module_init(fileio_module_init); +module_exit(fileio_module_exit); diff --git a/drivers/target/target_core_file.h b/drivers/target/target_core_file.h new file mode 100644 index 000000000000..ef4de2b4bd46 --- /dev/null +++ b/drivers/target/target_core_file.h @@ -0,0 +1,50 @@ +#ifndef TARGET_CORE_FILE_H +#define TARGET_CORE_FILE_H + +#define FD_VERSION "4.0" + +#define FD_MAX_DEV_NAME 256 +/* Maximum queuedepth for the FILEIO HBA */ +#define FD_HBA_QUEUE_DEPTH 256 +#define FD_DEVICE_QUEUE_DEPTH 32 +#define FD_MAX_DEVICE_QUEUE_DEPTH 128 +#define FD_BLOCKSIZE 512 +#define FD_MAX_SECTORS 1024 + +#define RRF_EMULATE_CDB 0x01 +#define RRF_GOT_LBA 0x02 + +struct fd_request { + struct se_task fd_task; + /* SCSI CDB from iSCSI Command PDU */ + unsigned char fd_scsi_cdb[TCM_MAX_COMMAND_SIZE]; + /* FILEIO device */ + struct fd_dev *fd_dev; +} ____cacheline_aligned; + +#define FBDF_HAS_PATH 0x01 +#define FBDF_HAS_SIZE 0x02 +#define FDBD_USE_BUFFERED_IO 0x04 + +struct fd_dev { + u32 fbd_flags; + unsigned char fd_dev_name[FD_MAX_DEV_NAME]; + /* Unique Ramdisk Device ID in Ramdisk HBA */ + u32 fd_dev_id; + /* Number of SG tables in sg_table_array */ + u32 fd_table_count; + u32 fd_queue_depth; + u32 fd_block_size; + unsigned long long fd_dev_size; + struct file *fd_file; + /* FILEIO HBA device is connected to */ + struct fd_host *fd_host; +} ____cacheline_aligned; + +struct fd_host { + u32 fd_host_dev_id_count; + /* Unique FILEIO Host ID */ + u32 fd_host_id; +} ____cacheline_aligned; + +#endif /* TARGET_CORE_FILE_H */ diff --git a/drivers/target/target_core_hba.c b/drivers/target/target_core_hba.c new file mode 100644 index 000000000000..4bbe8208b241 --- /dev/null +++ b/drivers/target/target_core_hba.c @@ -0,0 +1,185 @@ +/******************************************************************************* + * Filename: target_core_hba.c + * + * This file copntains the iSCSI HBA Transport related functions. + * + * Copyright (c) 2003, 2004, 2005 PyX Technologies, Inc. + * Copyright (c) 2005, 2006, 2007 SBE, Inc. + * Copyright (c) 2007-2010 Rising Tide Systems + * Copyright (c) 2008-2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ******************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "target_core_hba.h" + +static LIST_HEAD(subsystem_list); +static DEFINE_MUTEX(subsystem_mutex); + +int transport_subsystem_register(struct se_subsystem_api *sub_api) +{ + struct se_subsystem_api *s; + + INIT_LIST_HEAD(&sub_api->sub_api_list); + + mutex_lock(&subsystem_mutex); + list_for_each_entry(s, &subsystem_list, sub_api_list) { + if (!(strcmp(s->name, sub_api->name))) { + printk(KERN_ERR "%p is already registered with" + " duplicate name %s, unable to process" + " request\n", s, s->name); + mutex_unlock(&subsystem_mutex); + return -EEXIST; + } + } + list_add_tail(&sub_api->sub_api_list, &subsystem_list); + mutex_unlock(&subsystem_mutex); + + printk(KERN_INFO "TCM: Registered subsystem plugin: %s struct module:" + " %p\n", sub_api->name, sub_api->owner); + return 0; +} +EXPORT_SYMBOL(transport_subsystem_register); + +void transport_subsystem_release(struct se_subsystem_api *sub_api) +{ + mutex_lock(&subsystem_mutex); + list_del(&sub_api->sub_api_list); + mutex_unlock(&subsystem_mutex); +} +EXPORT_SYMBOL(transport_subsystem_release); + +static struct se_subsystem_api *core_get_backend(const char *sub_name) +{ + struct se_subsystem_api *s; + + mutex_lock(&subsystem_mutex); + list_for_each_entry(s, &subsystem_list, sub_api_list) { + if (!strcmp(s->name, sub_name)) + goto found; + } + mutex_unlock(&subsystem_mutex); + return NULL; +found: + if (s->owner && !try_module_get(s->owner)) + s = NULL; + mutex_unlock(&subsystem_mutex); + return s; +} + +struct se_hba * +core_alloc_hba(const char *plugin_name, u32 plugin_dep_id, u32 hba_flags) +{ + struct se_hba *hba; + int ret = 0; + + hba = kzalloc(sizeof(*hba), GFP_KERNEL); + if (!hba) { + printk(KERN_ERR "Unable to allocate struct se_hba\n"); + return ERR_PTR(-ENOMEM); + } + + INIT_LIST_HEAD(&hba->hba_dev_list); + spin_lock_init(&hba->device_lock); + spin_lock_init(&hba->hba_queue_lock); + mutex_init(&hba->hba_access_mutex); + + hba->hba_index = scsi_get_new_index(SCSI_INST_INDEX); + hba->hba_flags |= hba_flags; + + atomic_set(&hba->max_queue_depth, 0); + atomic_set(&hba->left_queue_depth, 0); + + hba->transport = core_get_backend(plugin_name); + if (!hba->transport) { + ret = -EINVAL; + goto out_free_hba; + } + + ret = hba->transport->attach_hba(hba, plugin_dep_id); + if (ret < 0) + goto out_module_put; + + spin_lock(&se_global->hba_lock); + hba->hba_id = se_global->g_hba_id_counter++; + list_add_tail(&hba->hba_list, &se_global->g_hba_list); + spin_unlock(&se_global->hba_lock); + + printk(KERN_INFO "CORE_HBA[%d] - Attached HBA to Generic Target" + " Core\n", hba->hba_id); + + return hba; + +out_module_put: + if (hba->transport->owner) + module_put(hba->transport->owner); + hba->transport = NULL; +out_free_hba: + kfree(hba); + return ERR_PTR(ret); +} + +int +core_delete_hba(struct se_hba *hba) +{ + struct se_device *dev, *dev_tmp; + + spin_lock(&hba->device_lock); + list_for_each_entry_safe(dev, dev_tmp, &hba->hba_dev_list, dev_list) { + + se_clear_dev_ports(dev); + spin_unlock(&hba->device_lock); + + se_release_device_for_hba(dev); + + spin_lock(&hba->device_lock); + } + spin_unlock(&hba->device_lock); + + hba->transport->detach_hba(hba); + + spin_lock(&se_global->hba_lock); + list_del(&hba->hba_list); + spin_unlock(&se_global->hba_lock); + + printk(KERN_INFO "CORE_HBA[%d] - Detached HBA from Generic Target" + " Core\n", hba->hba_id); + + if (hba->transport->owner) + module_put(hba->transport->owner); + + hba->transport = NULL; + kfree(hba); + return 0; +} diff --git a/drivers/target/target_core_hba.h b/drivers/target/target_core_hba.h new file mode 100644 index 000000000000..bb0fea5f730c --- /dev/null +++ b/drivers/target/target_core_hba.h @@ -0,0 +1,7 @@ +#ifndef TARGET_CORE_HBA_H +#define TARGET_CORE_HBA_H + +extern struct se_hba *core_alloc_hba(const char *, u32, u32); +extern int core_delete_hba(struct se_hba *); + +#endif /* TARGET_CORE_HBA_H */ diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c new file mode 100644 index 000000000000..c6e0d757e76e --- /dev/null +++ b/drivers/target/target_core_iblock.c @@ -0,0 +1,808 @@ +/******************************************************************************* + * Filename: target_core_iblock.c + * + * This file contains the Storage Engine <-> Linux BlockIO transport + * specific functions. + * + * Copyright (c) 2003, 2004, 2005 PyX Technologies, Inc. + * Copyright (c) 2005, 2006, 2007 SBE, Inc. + * Copyright (c) 2007-2010 Rising Tide Systems + * Copyright (c) 2008-2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ******************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "target_core_iblock.h" + +#if 0 +#define DEBUG_IBLOCK(x...) printk(x) +#else +#define DEBUG_IBLOCK(x...) +#endif + +static struct se_subsystem_api iblock_template; + +static void iblock_bio_done(struct bio *, int); + +/* iblock_attach_hba(): (Part of se_subsystem_api_t template) + * + * + */ +static int iblock_attach_hba(struct se_hba *hba, u32 host_id) +{ + struct iblock_hba *ib_host; + + ib_host = kzalloc(sizeof(struct iblock_hba), GFP_KERNEL); + if (!(ib_host)) { + printk(KERN_ERR "Unable to allocate memory for" + " struct iblock_hba\n"); + return -ENOMEM; + } + + ib_host->iblock_host_id = host_id; + + atomic_set(&hba->left_queue_depth, IBLOCK_HBA_QUEUE_DEPTH); + atomic_set(&hba->max_queue_depth, IBLOCK_HBA_QUEUE_DEPTH); + hba->hba_ptr = (void *) ib_host; + + printk(KERN_INFO "CORE_HBA[%d] - TCM iBlock HBA Driver %s on" + " Generic Target Core Stack %s\n", hba->hba_id, + IBLOCK_VERSION, TARGET_CORE_MOD_VERSION); + + printk(KERN_INFO "CORE_HBA[%d] - Attached iBlock HBA: %u to Generic" + " Target Core TCQ Depth: %d\n", hba->hba_id, + ib_host->iblock_host_id, atomic_read(&hba->max_queue_depth)); + + return 0; +} + +static void iblock_detach_hba(struct se_hba *hba) +{ + struct iblock_hba *ib_host = hba->hba_ptr; + + printk(KERN_INFO "CORE_HBA[%d] - Detached iBlock HBA: %u from Generic" + " Target Core\n", hba->hba_id, ib_host->iblock_host_id); + + kfree(ib_host); + hba->hba_ptr = NULL; +} + +static void *iblock_allocate_virtdevice(struct se_hba *hba, const char *name) +{ + struct iblock_dev *ib_dev = NULL; + struct iblock_hba *ib_host = hba->hba_ptr; + + ib_dev = kzalloc(sizeof(struct iblock_dev), GFP_KERNEL); + if (!(ib_dev)) { + printk(KERN_ERR "Unable to allocate struct iblock_dev\n"); + return NULL; + } + ib_dev->ibd_host = ib_host; + + printk(KERN_INFO "IBLOCK: Allocated ib_dev for %s\n", name); + + return ib_dev; +} + +static struct se_device *iblock_create_virtdevice( + struct se_hba *hba, + struct se_subsystem_dev *se_dev, + void *p) +{ + struct iblock_dev *ib_dev = p; + struct se_device *dev; + struct se_dev_limits dev_limits; + struct block_device *bd = NULL; + struct request_queue *q; + struct queue_limits *limits; + u32 dev_flags = 0; + + if (!(ib_dev)) { + printk(KERN_ERR "Unable to locate struct iblock_dev parameter\n"); + return 0; + } + memset(&dev_limits, 0, sizeof(struct se_dev_limits)); + /* + * These settings need to be made tunable.. + */ + ib_dev->ibd_bio_set = bioset_create(32, 64); + if (!(ib_dev->ibd_bio_set)) { + printk(KERN_ERR "IBLOCK: Unable to create bioset()\n"); + return 0; + } + printk(KERN_INFO "IBLOCK: Created bio_set()\n"); + /* + * iblock_check_configfs_dev_params() ensures that ib_dev->ibd_udev_path + * must already have been set in order for echo 1 > $HBA/$DEV/enable to run. + */ + printk(KERN_INFO "IBLOCK: Claiming struct block_device: %s\n", + ib_dev->ibd_udev_path); + + bd = blkdev_get_by_path(ib_dev->ibd_udev_path, + FMODE_WRITE|FMODE_READ|FMODE_EXCL, ib_dev); + if (!(bd)) + goto failed; + /* + * Setup the local scope queue_limits from struct request_queue->limits + * to pass into transport_add_device_to_core_hba() as struct se_dev_limits. + */ + q = bdev_get_queue(bd); + limits = &dev_limits.limits; + limits->logical_block_size = bdev_logical_block_size(bd); + limits->max_hw_sectors = queue_max_hw_sectors(q); + limits->max_sectors = queue_max_sectors(q); + dev_limits.hw_queue_depth = IBLOCK_MAX_DEVICE_QUEUE_DEPTH; + dev_limits.queue_depth = IBLOCK_DEVICE_QUEUE_DEPTH; + + ib_dev->ibd_major = MAJOR(bd->bd_dev); + ib_dev->ibd_minor = MINOR(bd->bd_dev); + ib_dev->ibd_bd = bd; + + dev = transport_add_device_to_core_hba(hba, + &iblock_template, se_dev, dev_flags, (void *)ib_dev, + &dev_limits, "IBLOCK", IBLOCK_VERSION); + if (!(dev)) + goto failed; + + ib_dev->ibd_depth = dev->queue_depth; + + /* + * Check if the underlying struct block_device request_queue supports + * the QUEUE_FLAG_DISCARD bit for UNMAP/WRITE_SAME in SCSI + TRIM + * in ATA and we need to set TPE=1 + */ + if (blk_queue_discard(bdev_get_queue(bd))) { + struct request_queue *q = bdev_get_queue(bd); + + DEV_ATTRIB(dev)->max_unmap_lba_count = + q->limits.max_discard_sectors; + /* + * Currently hardcoded to 1 in Linux/SCSI code.. + */ + DEV_ATTRIB(dev)->max_unmap_block_desc_count = 1; + DEV_ATTRIB(dev)->unmap_granularity = + q->limits.discard_granularity; + DEV_ATTRIB(dev)->unmap_granularity_alignment = + q->limits.discard_alignment; + + printk(KERN_INFO "IBLOCK: BLOCK Discard support available," + " disabled by default\n"); + } + + return dev; + +failed: + if (ib_dev->ibd_bio_set) { + bioset_free(ib_dev->ibd_bio_set); + ib_dev->ibd_bio_set = NULL; + } + ib_dev->ibd_bd = NULL; + ib_dev->ibd_major = 0; + ib_dev->ibd_minor = 0; + return NULL; +} + +static void iblock_free_device(void *p) +{ + struct iblock_dev *ib_dev = p; + + blkdev_put(ib_dev->ibd_bd, FMODE_WRITE|FMODE_READ|FMODE_EXCL); + bioset_free(ib_dev->ibd_bio_set); + kfree(ib_dev); +} + +static inline struct iblock_req *IBLOCK_REQ(struct se_task *task) +{ + return container_of(task, struct iblock_req, ib_task); +} + +static struct se_task * +iblock_alloc_task(struct se_cmd *cmd) +{ + struct iblock_req *ib_req; + + ib_req = kzalloc(sizeof(struct iblock_req), GFP_KERNEL); + if (!(ib_req)) { + printk(KERN_ERR "Unable to allocate memory for struct iblock_req\n"); + return NULL; + } + + ib_req->ib_dev = SE_DEV(cmd)->dev_ptr; + atomic_set(&ib_req->ib_bio_cnt, 0); + return &ib_req->ib_task; +} + +static unsigned long long iblock_emulate_read_cap_with_block_size( + struct se_device *dev, + struct block_device *bd, + struct request_queue *q) +{ + unsigned long long blocks_long = (div_u64(i_size_read(bd->bd_inode), + bdev_logical_block_size(bd)) - 1); + u32 block_size = bdev_logical_block_size(bd); + + if (block_size == DEV_ATTRIB(dev)->block_size) + return blocks_long; + + switch (block_size) { + case 4096: + switch (DEV_ATTRIB(dev)->block_size) { + case 2048: + blocks_long <<= 1; + break; + case 1024: + blocks_long <<= 2; + break; + case 512: + blocks_long <<= 3; + default: + break; + } + break; + case 2048: + switch (DEV_ATTRIB(dev)->block_size) { + case 4096: + blocks_long >>= 1; + break; + case 1024: + blocks_long <<= 1; + break; + case 512: + blocks_long <<= 2; + break; + default: + break; + } + break; + case 1024: + switch (DEV_ATTRIB(dev)->block_size) { + case 4096: + blocks_long >>= 2; + break; + case 2048: + blocks_long >>= 1; + break; + case 512: + blocks_long <<= 1; + break; + default: + break; + } + break; + case 512: + switch (DEV_ATTRIB(dev)->block_size) { + case 4096: + blocks_long >>= 3; + break; + case 2048: + blocks_long >>= 2; + break; + case 1024: + blocks_long >>= 1; + break; + default: + break; + } + break; + default: + break; + } + + return blocks_long; +} + +/* + * Emulate SYCHRONIZE_CACHE_* + */ +static void iblock_emulate_sync_cache(struct se_task *task) +{ + struct se_cmd *cmd = TASK_CMD(task); + struct iblock_dev *ib_dev = cmd->se_dev->dev_ptr; + int immed = (T_TASK(cmd)->t_task_cdb[1] & 0x2); + sector_t error_sector; + int ret; + + /* + * If the Immediate bit is set, queue up the GOOD response + * for this SYNCHRONIZE_CACHE op + */ + if (immed) + transport_complete_sync_cache(cmd, 1); + + /* + * blkdev_issue_flush() does not support a specifying a range, so + * we have to flush the entire cache. + */ + ret = blkdev_issue_flush(ib_dev->ibd_bd, GFP_KERNEL, &error_sector); + if (ret != 0) { + printk(KERN_ERR "IBLOCK: block_issue_flush() failed: %d " + " error_sector: %llu\n", ret, + (unsigned long long)error_sector); + } + + if (!immed) + transport_complete_sync_cache(cmd, ret == 0); +} + +/* + * Tell TCM Core that we are capable of WriteCache emulation for + * an underlying struct se_device. + */ +static int iblock_emulated_write_cache(struct se_device *dev) +{ + return 1; +} + +static int iblock_emulated_dpo(struct se_device *dev) +{ + return 0; +} + +/* + * Tell TCM Core that we will be emulating Forced Unit Access (FUA) for WRITEs + * for TYPE_DISK. + */ +static int iblock_emulated_fua_write(struct se_device *dev) +{ + return 1; +} + +static int iblock_emulated_fua_read(struct se_device *dev) +{ + return 0; +} + +static int iblock_do_task(struct se_task *task) +{ + struct se_device *dev = task->task_se_cmd->se_dev; + struct iblock_req *req = IBLOCK_REQ(task); + struct iblock_dev *ibd = (struct iblock_dev *)req->ib_dev; + struct request_queue *q = bdev_get_queue(ibd->ibd_bd); + struct bio *bio = req->ib_bio, *nbio = NULL; + int rw; + + if (task->task_data_direction == DMA_TO_DEVICE) { + /* + * Force data to disk if we pretend to not have a volatile + * write cache, or the initiator set the Force Unit Access bit. + */ + if (DEV_ATTRIB(dev)->emulate_write_cache == 0 || + (DEV_ATTRIB(dev)->emulate_fua_write > 0 && + T_TASK(task->task_se_cmd)->t_tasks_fua)) + rw = WRITE_FUA; + else + rw = WRITE; + } else { + rw = READ; + } + + while (bio) { + nbio = bio->bi_next; + bio->bi_next = NULL; + DEBUG_IBLOCK("Calling submit_bio() task: %p bio: %p" + " bio->bi_sector: %llu\n", task, bio, bio->bi_sector); + + submit_bio(rw, bio); + bio = nbio; + } + + if (q->unplug_fn) + q->unplug_fn(q); + return PYX_TRANSPORT_SENT_TO_TRANSPORT; +} + +static int iblock_do_discard(struct se_device *dev, sector_t lba, u32 range) +{ + struct iblock_dev *ibd = dev->dev_ptr; + struct block_device *bd = ibd->ibd_bd; + int barrier = 0; + + return blkdev_issue_discard(bd, lba, range, GFP_KERNEL, barrier); +} + +static void iblock_free_task(struct se_task *task) +{ + struct iblock_req *req = IBLOCK_REQ(task); + struct bio *bio, *hbio = req->ib_bio; + /* + * We only release the bio(s) here if iblock_bio_done() has not called + * bio_put() -> iblock_bio_destructor(). + */ + while (hbio != NULL) { + bio = hbio; + hbio = hbio->bi_next; + bio->bi_next = NULL; + bio_put(bio); + } + + kfree(req); +} + +enum { + Opt_udev_path, Opt_force, Opt_err +}; + +static match_table_t tokens = { + {Opt_udev_path, "udev_path=%s"}, + {Opt_force, "force=%d"}, + {Opt_err, NULL} +}; + +static ssize_t iblock_set_configfs_dev_params(struct se_hba *hba, + struct se_subsystem_dev *se_dev, + const char *page, ssize_t count) +{ + struct iblock_dev *ib_dev = se_dev->se_dev_su_ptr; + char *orig, *ptr, *opts; + substring_t args[MAX_OPT_ARGS]; + int ret = 0, arg, token; + + opts = kstrdup(page, GFP_KERNEL); + if (!opts) + return -ENOMEM; + + orig = opts; + + while ((ptr = strsep(&opts, ",")) != NULL) { + if (!*ptr) + continue; + + token = match_token(ptr, tokens, args); + switch (token) { + case Opt_udev_path: + if (ib_dev->ibd_bd) { + printk(KERN_ERR "Unable to set udev_path= while" + " ib_dev->ibd_bd exists\n"); + ret = -EEXIST; + goto out; + } + + ret = snprintf(ib_dev->ibd_udev_path, SE_UDEV_PATH_LEN, + "%s", match_strdup(&args[0])); + printk(KERN_INFO "IBLOCK: Referencing UDEV path: %s\n", + ib_dev->ibd_udev_path); + ib_dev->ibd_flags |= IBDF_HAS_UDEV_PATH; + break; + case Opt_force: + match_int(args, &arg); + ib_dev->ibd_force = arg; + printk(KERN_INFO "IBLOCK: Set force=%d\n", + ib_dev->ibd_force); + break; + default: + break; + } + } + +out: + kfree(orig); + return (!ret) ? count : ret; +} + +static ssize_t iblock_check_configfs_dev_params( + struct se_hba *hba, + struct se_subsystem_dev *se_dev) +{ + struct iblock_dev *ibd = se_dev->se_dev_su_ptr; + + if (!(ibd->ibd_flags & IBDF_HAS_UDEV_PATH)) { + printk(KERN_ERR "Missing udev_path= parameters for IBLOCK\n"); + return -1; + } + + return 0; +} + +static ssize_t iblock_show_configfs_dev_params( + struct se_hba *hba, + struct se_subsystem_dev *se_dev, + char *b) +{ + struct iblock_dev *ibd = se_dev->se_dev_su_ptr; + struct block_device *bd = ibd->ibd_bd; + char buf[BDEVNAME_SIZE]; + ssize_t bl = 0; + + if (bd) + bl += sprintf(b + bl, "iBlock device: %s", + bdevname(bd, buf)); + if (ibd->ibd_flags & IBDF_HAS_UDEV_PATH) { + bl += sprintf(b + bl, " UDEV PATH: %s\n", + ibd->ibd_udev_path); + } else + bl += sprintf(b + bl, "\n"); + + bl += sprintf(b + bl, " "); + if (bd) { + bl += sprintf(b + bl, "Major: %d Minor: %d %s\n", + ibd->ibd_major, ibd->ibd_minor, (!bd->bd_contains) ? + "" : (bd->bd_holder == (struct iblock_dev *)ibd) ? + "CLAIMED: IBLOCK" : "CLAIMED: OS"); + } else { + bl += sprintf(b + bl, "Major: %d Minor: %d\n", + ibd->ibd_major, ibd->ibd_minor); + } + + return bl; +} + +static void iblock_bio_destructor(struct bio *bio) +{ + struct se_task *task = bio->bi_private; + struct iblock_dev *ib_dev = task->se_dev->dev_ptr; + + bio_free(bio, ib_dev->ibd_bio_set); +} + +static struct bio *iblock_get_bio( + struct se_task *task, + struct iblock_req *ib_req, + struct iblock_dev *ib_dev, + int *ret, + sector_t lba, + u32 sg_num) +{ + struct bio *bio; + + bio = bio_alloc_bioset(GFP_NOIO, sg_num, ib_dev->ibd_bio_set); + if (!(bio)) { + printk(KERN_ERR "Unable to allocate memory for bio\n"); + *ret = PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + return NULL; + } + + DEBUG_IBLOCK("Allocated bio: %p task_sg_num: %u using ibd_bio_set:" + " %p\n", bio, task->task_sg_num, ib_dev->ibd_bio_set); + DEBUG_IBLOCK("Allocated bio: %p task_size: %u\n", bio, task->task_size); + + bio->bi_bdev = ib_dev->ibd_bd; + bio->bi_private = (void *) task; + bio->bi_destructor = iblock_bio_destructor; + bio->bi_end_io = &iblock_bio_done; + bio->bi_sector = lba; + atomic_inc(&ib_req->ib_bio_cnt); + + DEBUG_IBLOCK("Set bio->bi_sector: %llu\n", bio->bi_sector); + DEBUG_IBLOCK("Set ib_req->ib_bio_cnt: %d\n", + atomic_read(&ib_req->ib_bio_cnt)); + return bio; +} + +static int iblock_map_task_SG(struct se_task *task) +{ + struct se_cmd *cmd = task->task_se_cmd; + struct se_device *dev = SE_DEV(cmd); + struct iblock_dev *ib_dev = task->se_dev->dev_ptr; + struct iblock_req *ib_req = IBLOCK_REQ(task); + struct bio *bio = NULL, *hbio = NULL, *tbio = NULL; + struct scatterlist *sg; + int ret = 0; + u32 i, sg_num = task->task_sg_num; + sector_t block_lba; + /* + * Do starting conversion up from non 512-byte blocksize with + * struct se_task SCSI blocksize into Linux/Block 512 units for BIO. + */ + if (DEV_ATTRIB(dev)->block_size == 4096) + block_lba = (task->task_lba << 3); + else if (DEV_ATTRIB(dev)->block_size == 2048) + block_lba = (task->task_lba << 2); + else if (DEV_ATTRIB(dev)->block_size == 1024) + block_lba = (task->task_lba << 1); + else if (DEV_ATTRIB(dev)->block_size == 512) + block_lba = task->task_lba; + else { + printk(KERN_ERR "Unsupported SCSI -> BLOCK LBA conversion:" + " %u\n", DEV_ATTRIB(dev)->block_size); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + + bio = iblock_get_bio(task, ib_req, ib_dev, &ret, block_lba, sg_num); + if (!(bio)) + return ret; + + ib_req->ib_bio = bio; + hbio = tbio = bio; + /* + * Use fs/bio.c:bio_add_pages() to setup the bio_vec maplist + * from TCM struct se_mem -> task->task_sg -> struct scatterlist memory. + */ + for_each_sg(task->task_sg, sg, task->task_sg_num, i) { + DEBUG_IBLOCK("task: %p bio: %p Calling bio_add_page(): page:" + " %p len: %u offset: %u\n", task, bio, sg_page(sg), + sg->length, sg->offset); +again: + ret = bio_add_page(bio, sg_page(sg), sg->length, sg->offset); + if (ret != sg->length) { + + DEBUG_IBLOCK("*** Set bio->bi_sector: %llu\n", + bio->bi_sector); + DEBUG_IBLOCK("** task->task_size: %u\n", + task->task_size); + DEBUG_IBLOCK("*** bio->bi_max_vecs: %u\n", + bio->bi_max_vecs); + DEBUG_IBLOCK("*** bio->bi_vcnt: %u\n", + bio->bi_vcnt); + + bio = iblock_get_bio(task, ib_req, ib_dev, &ret, + block_lba, sg_num); + if (!(bio)) + goto fail; + + tbio = tbio->bi_next = bio; + DEBUG_IBLOCK("-----------------> Added +1 bio: %p to" + " list, Going to again\n", bio); + goto again; + } + /* Always in 512 byte units for Linux/Block */ + block_lba += sg->length >> IBLOCK_LBA_SHIFT; + sg_num--; + DEBUG_IBLOCK("task: %p bio-add_page() passed!, decremented" + " sg_num to %u\n", task, sg_num); + DEBUG_IBLOCK("task: %p bio_add_page() passed!, increased lba" + " to %llu\n", task, block_lba); + DEBUG_IBLOCK("task: %p bio_add_page() passed!, bio->bi_vcnt:" + " %u\n", task, bio->bi_vcnt); + } + + return 0; +fail: + while (hbio) { + bio = hbio; + hbio = hbio->bi_next; + bio->bi_next = NULL; + bio_put(bio); + } + return ret; +} + +static unsigned char *iblock_get_cdb(struct se_task *task) +{ + return IBLOCK_REQ(task)->ib_scsi_cdb; +} + +static u32 iblock_get_device_rev(struct se_device *dev) +{ + return SCSI_SPC_2; /* Returns SPC-3 in Initiator Data */ +} + +static u32 iblock_get_device_type(struct se_device *dev) +{ + return TYPE_DISK; +} + +static sector_t iblock_get_blocks(struct se_device *dev) +{ + struct iblock_dev *ibd = dev->dev_ptr; + struct block_device *bd = ibd->ibd_bd; + struct request_queue *q = bdev_get_queue(bd); + + return iblock_emulate_read_cap_with_block_size(dev, bd, q); +} + +static void iblock_bio_done(struct bio *bio, int err) +{ + struct se_task *task = bio->bi_private; + struct iblock_req *ibr = IBLOCK_REQ(task); + /* + * Set -EIO if !BIO_UPTODATE and the passed is still err=0 + */ + if (!(test_bit(BIO_UPTODATE, &bio->bi_flags)) && !(err)) + err = -EIO; + + if (err != 0) { + printk(KERN_ERR "test_bit(BIO_UPTODATE) failed for bio: %p," + " err: %d\n", bio, err); + /* + * Bump the ib_bio_err_cnt and release bio. + */ + atomic_inc(&ibr->ib_bio_err_cnt); + smp_mb__after_atomic_inc(); + bio_put(bio); + /* + * Wait to complete the task until the last bio as completed. + */ + if (!(atomic_dec_and_test(&ibr->ib_bio_cnt))) + return; + + ibr->ib_bio = NULL; + transport_complete_task(task, 0); + return; + } + DEBUG_IBLOCK("done[%p] bio: %p task_lba: %llu bio_lba: %llu err=%d\n", + task, bio, task->task_lba, bio->bi_sector, err); + /* + * bio_put() will call iblock_bio_destructor() to release the bio back + * to ibr->ib_bio_set. + */ + bio_put(bio); + /* + * Wait to complete the task until the last bio as completed. + */ + if (!(atomic_dec_and_test(&ibr->ib_bio_cnt))) + return; + /* + * Return GOOD status for task if zero ib_bio_err_cnt exists. + */ + ibr->ib_bio = NULL; + transport_complete_task(task, (!atomic_read(&ibr->ib_bio_err_cnt))); +} + +static struct se_subsystem_api iblock_template = { + .name = "iblock", + .owner = THIS_MODULE, + .transport_type = TRANSPORT_PLUGIN_VHBA_PDEV, + .map_task_SG = iblock_map_task_SG, + .attach_hba = iblock_attach_hba, + .detach_hba = iblock_detach_hba, + .allocate_virtdevice = iblock_allocate_virtdevice, + .create_virtdevice = iblock_create_virtdevice, + .free_device = iblock_free_device, + .dpo_emulated = iblock_emulated_dpo, + .fua_write_emulated = iblock_emulated_fua_write, + .fua_read_emulated = iblock_emulated_fua_read, + .write_cache_emulated = iblock_emulated_write_cache, + .alloc_task = iblock_alloc_task, + .do_task = iblock_do_task, + .do_discard = iblock_do_discard, + .do_sync_cache = iblock_emulate_sync_cache, + .free_task = iblock_free_task, + .check_configfs_dev_params = iblock_check_configfs_dev_params, + .set_configfs_dev_params = iblock_set_configfs_dev_params, + .show_configfs_dev_params = iblock_show_configfs_dev_params, + .get_cdb = iblock_get_cdb, + .get_device_rev = iblock_get_device_rev, + .get_device_type = iblock_get_device_type, + .get_blocks = iblock_get_blocks, +}; + +static int __init iblock_module_init(void) +{ + return transport_subsystem_register(&iblock_template); +} + +static void iblock_module_exit(void) +{ + transport_subsystem_release(&iblock_template); +} + +MODULE_DESCRIPTION("TCM IBLOCK subsystem plugin"); +MODULE_AUTHOR("nab@Linux-iSCSI.org"); +MODULE_LICENSE("GPL"); + +module_init(iblock_module_init); +module_exit(iblock_module_exit); diff --git a/drivers/target/target_core_iblock.h b/drivers/target/target_core_iblock.h new file mode 100644 index 000000000000..64c1f4d69f76 --- /dev/null +++ b/drivers/target/target_core_iblock.h @@ -0,0 +1,40 @@ +#ifndef TARGET_CORE_IBLOCK_H +#define TARGET_CORE_IBLOCK_H + +#define IBLOCK_VERSION "4.0" + +#define IBLOCK_HBA_QUEUE_DEPTH 512 +#define IBLOCK_DEVICE_QUEUE_DEPTH 32 +#define IBLOCK_MAX_DEVICE_QUEUE_DEPTH 128 +#define IBLOCK_MAX_CDBS 16 +#define IBLOCK_LBA_SHIFT 9 + +struct iblock_req { + struct se_task ib_task; + unsigned char ib_scsi_cdb[TCM_MAX_COMMAND_SIZE]; + atomic_t ib_bio_cnt; + atomic_t ib_bio_err_cnt; + struct bio *ib_bio; + struct iblock_dev *ib_dev; +} ____cacheline_aligned; + +#define IBDF_HAS_UDEV_PATH 0x01 +#define IBDF_HAS_FORCE 0x02 + +struct iblock_dev { + unsigned char ibd_udev_path[SE_UDEV_PATH_LEN]; + int ibd_force; + int ibd_major; + int ibd_minor; + u32 ibd_depth; + u32 ibd_flags; + struct bio_set *ibd_bio_set; + struct block_device *ibd_bd; + struct iblock_hba *ibd_host; +} ____cacheline_aligned; + +struct iblock_hba { + int iblock_host_id; +} ____cacheline_aligned; + +#endif /* TARGET_CORE_IBLOCK_H */ diff --git a/drivers/target/target_core_mib.c b/drivers/target/target_core_mib.c new file mode 100644 index 000000000000..d5a48aa0d2d1 --- /dev/null +++ b/drivers/target/target_core_mib.c @@ -0,0 +1,1078 @@ +/******************************************************************************* + * Filename: target_core_mib.c + * + * Copyright (c) 2006-2007 SBE, Inc. All Rights Reserved. + * Copyright (c) 2007-2010 Rising Tide Systems + * Copyright (c) 2008-2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ******************************************************************************/ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "target_core_hba.h" +#include "target_core_mib.h" + +/* SCSI mib table index */ +static struct scsi_index_table scsi_index_table; + +#ifndef INITIAL_JIFFIES +#define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ)) +#endif + +/* SCSI Instance Table */ +#define SCSI_INST_SW_INDEX 1 +#define SCSI_TRANSPORT_INDEX 1 + +#define NONE "None" +#define ISPRINT(a) ((a >= ' ') && (a <= '~')) + +static inline int list_is_first(const struct list_head *list, + const struct list_head *head) +{ + return list->prev == head; +} + +static void *locate_hba_start( + struct seq_file *seq, + loff_t *pos) +{ + spin_lock(&se_global->g_device_lock); + return seq_list_start(&se_global->g_se_dev_list, *pos); +} + +static void *locate_hba_next( + struct seq_file *seq, + void *v, + loff_t *pos) +{ + return seq_list_next(v, &se_global->g_se_dev_list, pos); +} + +static void locate_hba_stop(struct seq_file *seq, void *v) +{ + spin_unlock(&se_global->g_device_lock); +} + +/**************************************************************************** + * SCSI MIB Tables + ****************************************************************************/ + +/* + * SCSI Instance Table + */ +static void *scsi_inst_seq_start( + struct seq_file *seq, + loff_t *pos) +{ + spin_lock(&se_global->hba_lock); + return seq_list_start(&se_global->g_hba_list, *pos); +} + +static void *scsi_inst_seq_next( + struct seq_file *seq, + void *v, + loff_t *pos) +{ + return seq_list_next(v, &se_global->g_hba_list, pos); +} + +static void scsi_inst_seq_stop(struct seq_file *seq, void *v) +{ + spin_unlock(&se_global->hba_lock); +} + +static int scsi_inst_seq_show(struct seq_file *seq, void *v) +{ + struct se_hba *hba = list_entry(v, struct se_hba, hba_list); + + if (list_is_first(&hba->hba_list, &se_global->g_hba_list)) + seq_puts(seq, "inst sw_indx\n"); + + seq_printf(seq, "%u %u\n", hba->hba_index, SCSI_INST_SW_INDEX); + seq_printf(seq, "plugin: %s version: %s\n", + hba->transport->name, TARGET_CORE_VERSION); + + return 0; +} + +static const struct seq_operations scsi_inst_seq_ops = { + .start = scsi_inst_seq_start, + .next = scsi_inst_seq_next, + .stop = scsi_inst_seq_stop, + .show = scsi_inst_seq_show +}; + +static int scsi_inst_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &scsi_inst_seq_ops); +} + +static const struct file_operations scsi_inst_seq_fops = { + .owner = THIS_MODULE, + .open = scsi_inst_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +/* + * SCSI Device Table + */ +static void *scsi_dev_seq_start(struct seq_file *seq, loff_t *pos) +{ + return locate_hba_start(seq, pos); +} + +static void *scsi_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + return locate_hba_next(seq, v, pos); +} + +static void scsi_dev_seq_stop(struct seq_file *seq, void *v) +{ + locate_hba_stop(seq, v); +} + +static int scsi_dev_seq_show(struct seq_file *seq, void *v) +{ + struct se_hba *hba; + struct se_subsystem_dev *se_dev = list_entry(v, struct se_subsystem_dev, + g_se_dev_list); + struct se_device *dev = se_dev->se_dev_ptr; + char str[28]; + int k; + + if (list_is_first(&se_dev->g_se_dev_list, &se_global->g_se_dev_list)) + seq_puts(seq, "inst indx role ports\n"); + + if (!(dev)) + return 0; + + hba = dev->se_hba; + if (!(hba)) { + /* Log error ? */ + return 0; + } + + seq_printf(seq, "%u %u %s %u\n", hba->hba_index, + dev->dev_index, "Target", dev->dev_port_count); + + memcpy(&str[0], (void *)DEV_T10_WWN(dev), 28); + + /* vendor */ + for (k = 0; k < 8; k++) + str[k] = ISPRINT(DEV_T10_WWN(dev)->vendor[k]) ? + DEV_T10_WWN(dev)->vendor[k] : 0x20; + str[k] = 0x20; + + /* model */ + for (k = 0; k < 16; k++) + str[k+9] = ISPRINT(DEV_T10_WWN(dev)->model[k]) ? + DEV_T10_WWN(dev)->model[k] : 0x20; + str[k + 9] = 0; + + seq_printf(seq, "dev_alias: %s\n", str); + + return 0; +} + +static const struct seq_operations scsi_dev_seq_ops = { + .start = scsi_dev_seq_start, + .next = scsi_dev_seq_next, + .stop = scsi_dev_seq_stop, + .show = scsi_dev_seq_show +}; + +static int scsi_dev_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &scsi_dev_seq_ops); +} + +static const struct file_operations scsi_dev_seq_fops = { + .owner = THIS_MODULE, + .open = scsi_dev_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +/* + * SCSI Port Table + */ +static void *scsi_port_seq_start(struct seq_file *seq, loff_t *pos) +{ + return locate_hba_start(seq, pos); +} + +static void *scsi_port_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + return locate_hba_next(seq, v, pos); +} + +static void scsi_port_seq_stop(struct seq_file *seq, void *v) +{ + locate_hba_stop(seq, v); +} + +static int scsi_port_seq_show(struct seq_file *seq, void *v) +{ + struct se_hba *hba; + struct se_subsystem_dev *se_dev = list_entry(v, struct se_subsystem_dev, + g_se_dev_list); + struct se_device *dev = se_dev->se_dev_ptr; + struct se_port *sep, *sep_tmp; + + if (list_is_first(&se_dev->g_se_dev_list, &se_global->g_se_dev_list)) + seq_puts(seq, "inst device indx role busy_count\n"); + + if (!(dev)) + return 0; + + hba = dev->se_hba; + if (!(hba)) { + /* Log error ? */ + return 0; + } + + /* FIXME: scsiPortBusyStatuses count */ + spin_lock(&dev->se_port_lock); + list_for_each_entry_safe(sep, sep_tmp, &dev->dev_sep_list, sep_list) { + seq_printf(seq, "%u %u %u %s%u %u\n", hba->hba_index, + dev->dev_index, sep->sep_index, "Device", + dev->dev_index, 0); + } + spin_unlock(&dev->se_port_lock); + + return 0; +} + +static const struct seq_operations scsi_port_seq_ops = { + .start = scsi_port_seq_start, + .next = scsi_port_seq_next, + .stop = scsi_port_seq_stop, + .show = scsi_port_seq_show +}; + +static int scsi_port_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &scsi_port_seq_ops); +} + +static const struct file_operations scsi_port_seq_fops = { + .owner = THIS_MODULE, + .open = scsi_port_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +/* + * SCSI Transport Table + */ +static void *scsi_transport_seq_start(struct seq_file *seq, loff_t *pos) +{ + return locate_hba_start(seq, pos); +} + +static void *scsi_transport_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + return locate_hba_next(seq, v, pos); +} + +static void scsi_transport_seq_stop(struct seq_file *seq, void *v) +{ + locate_hba_stop(seq, v); +} + +static int scsi_transport_seq_show(struct seq_file *seq, void *v) +{ + struct se_hba *hba; + struct se_subsystem_dev *se_dev = list_entry(v, struct se_subsystem_dev, + g_se_dev_list); + struct se_device *dev = se_dev->se_dev_ptr; + struct se_port *se, *se_tmp; + struct se_portal_group *tpg; + struct t10_wwn *wwn; + char buf[64]; + + if (list_is_first(&se_dev->g_se_dev_list, &se_global->g_se_dev_list)) + seq_puts(seq, "inst device indx dev_name\n"); + + if (!(dev)) + return 0; + + hba = dev->se_hba; + if (!(hba)) { + /* Log error ? */ + return 0; + } + + wwn = DEV_T10_WWN(dev); + + spin_lock(&dev->se_port_lock); + list_for_each_entry_safe(se, se_tmp, &dev->dev_sep_list, sep_list) { + tpg = se->sep_tpg; + sprintf(buf, "scsiTransport%s", + TPG_TFO(tpg)->get_fabric_name()); + + seq_printf(seq, "%u %s %u %s+%s\n", + hba->hba_index, /* scsiTransportIndex */ + buf, /* scsiTransportType */ + (TPG_TFO(tpg)->tpg_get_inst_index != NULL) ? + TPG_TFO(tpg)->tpg_get_inst_index(tpg) : + 0, + TPG_TFO(tpg)->tpg_get_wwn(tpg), + (strlen(wwn->unit_serial)) ? + /* scsiTransportDevName */ + wwn->unit_serial : wwn->vendor); + } + spin_unlock(&dev->se_port_lock); + + return 0; +} + +static const struct seq_operations scsi_transport_seq_ops = { + .start = scsi_transport_seq_start, + .next = scsi_transport_seq_next, + .stop = scsi_transport_seq_stop, + .show = scsi_transport_seq_show +}; + +static int scsi_transport_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &scsi_transport_seq_ops); +} + +static const struct file_operations scsi_transport_seq_fops = { + .owner = THIS_MODULE, + .open = scsi_transport_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +/* + * SCSI Target Device Table + */ +static void *scsi_tgt_dev_seq_start(struct seq_file *seq, loff_t *pos) +{ + return locate_hba_start(seq, pos); +} + +static void *scsi_tgt_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + return locate_hba_next(seq, v, pos); +} + +static void scsi_tgt_dev_seq_stop(struct seq_file *seq, void *v) +{ + locate_hba_stop(seq, v); +} + + +#define LU_COUNT 1 /* for now */ +static int scsi_tgt_dev_seq_show(struct seq_file *seq, void *v) +{ + struct se_hba *hba; + struct se_subsystem_dev *se_dev = list_entry(v, struct se_subsystem_dev, + g_se_dev_list); + struct se_device *dev = se_dev->se_dev_ptr; + int non_accessible_lus = 0; + char status[16]; + + if (list_is_first(&se_dev->g_se_dev_list, &se_global->g_se_dev_list)) + seq_puts(seq, "inst indx num_LUs status non_access_LUs" + " resets\n"); + + if (!(dev)) + return 0; + + hba = dev->se_hba; + if (!(hba)) { + /* Log error ? */ + return 0; + } + + switch (dev->dev_status) { + case TRANSPORT_DEVICE_ACTIVATED: + strcpy(status, "activated"); + break; + case TRANSPORT_DEVICE_DEACTIVATED: + strcpy(status, "deactivated"); + non_accessible_lus = 1; + break; + case TRANSPORT_DEVICE_SHUTDOWN: + strcpy(status, "shutdown"); + non_accessible_lus = 1; + break; + case TRANSPORT_DEVICE_OFFLINE_ACTIVATED: + case TRANSPORT_DEVICE_OFFLINE_DEACTIVATED: + strcpy(status, "offline"); + non_accessible_lus = 1; + break; + default: + sprintf(status, "unknown(%d)", dev->dev_status); + non_accessible_lus = 1; + } + + seq_printf(seq, "%u %u %u %s %u %u\n", + hba->hba_index, dev->dev_index, LU_COUNT, + status, non_accessible_lus, dev->num_resets); + + return 0; +} + +static const struct seq_operations scsi_tgt_dev_seq_ops = { + .start = scsi_tgt_dev_seq_start, + .next = scsi_tgt_dev_seq_next, + .stop = scsi_tgt_dev_seq_stop, + .show = scsi_tgt_dev_seq_show +}; + +static int scsi_tgt_dev_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &scsi_tgt_dev_seq_ops); +} + +static const struct file_operations scsi_tgt_dev_seq_fops = { + .owner = THIS_MODULE, + .open = scsi_tgt_dev_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +/* + * SCSI Target Port Table + */ +static void *scsi_tgt_port_seq_start(struct seq_file *seq, loff_t *pos) +{ + return locate_hba_start(seq, pos); +} + +static void *scsi_tgt_port_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + return locate_hba_next(seq, v, pos); +} + +static void scsi_tgt_port_seq_stop(struct seq_file *seq, void *v) +{ + locate_hba_stop(seq, v); +} + +static int scsi_tgt_port_seq_show(struct seq_file *seq, void *v) +{ + struct se_hba *hba; + struct se_subsystem_dev *se_dev = list_entry(v, struct se_subsystem_dev, + g_se_dev_list); + struct se_device *dev = se_dev->se_dev_ptr; + struct se_port *sep, *sep_tmp; + struct se_portal_group *tpg; + u32 rx_mbytes, tx_mbytes; + unsigned long long num_cmds; + char buf[64]; + + if (list_is_first(&se_dev->g_se_dev_list, &se_global->g_se_dev_list)) + seq_puts(seq, "inst device indx name port_index in_cmds" + " write_mbytes read_mbytes hs_in_cmds\n"); + + if (!(dev)) + return 0; + + hba = dev->se_hba; + if (!(hba)) { + /* Log error ? */ + return 0; + } + + spin_lock(&dev->se_port_lock); + list_for_each_entry_safe(sep, sep_tmp, &dev->dev_sep_list, sep_list) { + tpg = sep->sep_tpg; + sprintf(buf, "%sPort#", + TPG_TFO(tpg)->get_fabric_name()); + + seq_printf(seq, "%u %u %u %s%d %s%s%d ", + hba->hba_index, + dev->dev_index, + sep->sep_index, + buf, sep->sep_index, + TPG_TFO(tpg)->tpg_get_wwn(tpg), "+t+", + TPG_TFO(tpg)->tpg_get_tag(tpg)); + + spin_lock(&sep->sep_lun->lun_sep_lock); + num_cmds = sep->sep_stats.cmd_pdus; + rx_mbytes = (sep->sep_stats.rx_data_octets >> 20); + tx_mbytes = (sep->sep_stats.tx_data_octets >> 20); + spin_unlock(&sep->sep_lun->lun_sep_lock); + + seq_printf(seq, "%llu %u %u %u\n", num_cmds, + rx_mbytes, tx_mbytes, 0); + } + spin_unlock(&dev->se_port_lock); + + return 0; +} + +static const struct seq_operations scsi_tgt_port_seq_ops = { + .start = scsi_tgt_port_seq_start, + .next = scsi_tgt_port_seq_next, + .stop = scsi_tgt_port_seq_stop, + .show = scsi_tgt_port_seq_show +}; + +static int scsi_tgt_port_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &scsi_tgt_port_seq_ops); +} + +static const struct file_operations scsi_tgt_port_seq_fops = { + .owner = THIS_MODULE, + .open = scsi_tgt_port_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +/* + * SCSI Authorized Initiator Table: + * It contains the SCSI Initiators authorized to be attached to one of the + * local Target ports. + * Iterates through all active TPGs and extracts the info from the ACLs + */ +static void *scsi_auth_intr_seq_start(struct seq_file *seq, loff_t *pos) +{ + spin_lock_bh(&se_global->se_tpg_lock); + return seq_list_start(&se_global->g_se_tpg_list, *pos); +} + +static void *scsi_auth_intr_seq_next(struct seq_file *seq, void *v, + loff_t *pos) +{ + return seq_list_next(v, &se_global->g_se_tpg_list, pos); +} + +static void scsi_auth_intr_seq_stop(struct seq_file *seq, void *v) +{ + spin_unlock_bh(&se_global->se_tpg_lock); +} + +static int scsi_auth_intr_seq_show(struct seq_file *seq, void *v) +{ + struct se_portal_group *se_tpg = list_entry(v, struct se_portal_group, + se_tpg_list); + struct se_dev_entry *deve; + struct se_lun *lun; + struct se_node_acl *se_nacl; + int j; + + if (list_is_first(&se_tpg->se_tpg_list, + &se_global->g_se_tpg_list)) + seq_puts(seq, "inst dev port indx dev_or_port intr_name " + "map_indx att_count num_cmds read_mbytes " + "write_mbytes hs_num_cmds creation_time row_status\n"); + + if (!(se_tpg)) + return 0; + + spin_lock(&se_tpg->acl_node_lock); + list_for_each_entry(se_nacl, &se_tpg->acl_node_list, acl_list) { + + atomic_inc(&se_nacl->mib_ref_count); + smp_mb__after_atomic_inc(); + spin_unlock(&se_tpg->acl_node_lock); + + spin_lock_irq(&se_nacl->device_list_lock); + for (j = 0; j < TRANSPORT_MAX_LUNS_PER_TPG; j++) { + deve = &se_nacl->device_list[j]; + if (!(deve->lun_flags & + TRANSPORT_LUNFLAGS_INITIATOR_ACCESS) || + (!deve->se_lun)) + continue; + lun = deve->se_lun; + if (!lun->lun_se_dev) + continue; + + seq_printf(seq, "%u %u %u %u %u %s %u %u %u %u %u %u" + " %u %s\n", + /* scsiInstIndex */ + (TPG_TFO(se_tpg)->tpg_get_inst_index != NULL) ? + TPG_TFO(se_tpg)->tpg_get_inst_index(se_tpg) : + 0, + /* scsiDeviceIndex */ + lun->lun_se_dev->dev_index, + /* scsiAuthIntrTgtPortIndex */ + TPG_TFO(se_tpg)->tpg_get_tag(se_tpg), + /* scsiAuthIntrIndex */ + se_nacl->acl_index, + /* scsiAuthIntrDevOrPort */ + 1, + /* scsiAuthIntrName */ + se_nacl->initiatorname[0] ? + se_nacl->initiatorname : NONE, + /* FIXME: scsiAuthIntrLunMapIndex */ + 0, + /* scsiAuthIntrAttachedTimes */ + deve->attach_count, + /* scsiAuthIntrOutCommands */ + deve->total_cmds, + /* scsiAuthIntrReadMegaBytes */ + (u32)(deve->read_bytes >> 20), + /* scsiAuthIntrWrittenMegaBytes */ + (u32)(deve->write_bytes >> 20), + /* FIXME: scsiAuthIntrHSOutCommands */ + 0, + /* scsiAuthIntrLastCreation */ + (u32)(((u32)deve->creation_time - + INITIAL_JIFFIES) * 100 / HZ), + /* FIXME: scsiAuthIntrRowStatus */ + "Ready"); + } + spin_unlock_irq(&se_nacl->device_list_lock); + + spin_lock(&se_tpg->acl_node_lock); + atomic_dec(&se_nacl->mib_ref_count); + smp_mb__after_atomic_dec(); + } + spin_unlock(&se_tpg->acl_node_lock); + + return 0; +} + +static const struct seq_operations scsi_auth_intr_seq_ops = { + .start = scsi_auth_intr_seq_start, + .next = scsi_auth_intr_seq_next, + .stop = scsi_auth_intr_seq_stop, + .show = scsi_auth_intr_seq_show +}; + +static int scsi_auth_intr_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &scsi_auth_intr_seq_ops); +} + +static const struct file_operations scsi_auth_intr_seq_fops = { + .owner = THIS_MODULE, + .open = scsi_auth_intr_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +/* + * SCSI Attached Initiator Port Table: + * It lists the SCSI Initiators attached to one of the local Target ports. + * Iterates through all active TPGs and use active sessions from each TPG + * to list the info fo this table. + */ +static void *scsi_att_intr_port_seq_start(struct seq_file *seq, loff_t *pos) +{ + spin_lock_bh(&se_global->se_tpg_lock); + return seq_list_start(&se_global->g_se_tpg_list, *pos); +} + +static void *scsi_att_intr_port_seq_next(struct seq_file *seq, void *v, + loff_t *pos) +{ + return seq_list_next(v, &se_global->g_se_tpg_list, pos); +} + +static void scsi_att_intr_port_seq_stop(struct seq_file *seq, void *v) +{ + spin_unlock_bh(&se_global->se_tpg_lock); +} + +static int scsi_att_intr_port_seq_show(struct seq_file *seq, void *v) +{ + struct se_portal_group *se_tpg = list_entry(v, struct se_portal_group, + se_tpg_list); + struct se_dev_entry *deve; + struct se_lun *lun; + struct se_node_acl *se_nacl; + struct se_session *se_sess; + unsigned char buf[64]; + int j; + + if (list_is_first(&se_tpg->se_tpg_list, + &se_global->g_se_tpg_list)) + seq_puts(seq, "inst dev port indx port_auth_indx port_name" + " port_ident\n"); + + if (!(se_tpg)) + return 0; + + spin_lock(&se_tpg->session_lock); + list_for_each_entry(se_sess, &se_tpg->tpg_sess_list, sess_list) { + if ((TPG_TFO(se_tpg)->sess_logged_in(se_sess)) || + (!se_sess->se_node_acl) || + (!se_sess->se_node_acl->device_list)) + continue; + + atomic_inc(&se_sess->mib_ref_count); + smp_mb__after_atomic_inc(); + se_nacl = se_sess->se_node_acl; + atomic_inc(&se_nacl->mib_ref_count); + smp_mb__after_atomic_inc(); + spin_unlock(&se_tpg->session_lock); + + spin_lock_irq(&se_nacl->device_list_lock); + for (j = 0; j < TRANSPORT_MAX_LUNS_PER_TPG; j++) { + deve = &se_nacl->device_list[j]; + if (!(deve->lun_flags & + TRANSPORT_LUNFLAGS_INITIATOR_ACCESS) || + (!deve->se_lun)) + continue; + + lun = deve->se_lun; + if (!lun->lun_se_dev) + continue; + + memset(buf, 0, 64); + if (TPG_TFO(se_tpg)->sess_get_initiator_sid != NULL) + TPG_TFO(se_tpg)->sess_get_initiator_sid( + se_sess, (unsigned char *)&buf[0], 64); + + seq_printf(seq, "%u %u %u %u %u %s+i+%s\n", + /* scsiInstIndex */ + (TPG_TFO(se_tpg)->tpg_get_inst_index != NULL) ? + TPG_TFO(se_tpg)->tpg_get_inst_index(se_tpg) : + 0, + /* scsiDeviceIndex */ + lun->lun_se_dev->dev_index, + /* scsiPortIndex */ + TPG_TFO(se_tpg)->tpg_get_tag(se_tpg), + /* scsiAttIntrPortIndex */ + (TPG_TFO(se_tpg)->sess_get_index != NULL) ? + TPG_TFO(se_tpg)->sess_get_index(se_sess) : + 0, + /* scsiAttIntrPortAuthIntrIdx */ + se_nacl->acl_index, + /* scsiAttIntrPortName */ + se_nacl->initiatorname[0] ? + se_nacl->initiatorname : NONE, + /* scsiAttIntrPortIdentifier */ + buf); + } + spin_unlock_irq(&se_nacl->device_list_lock); + + spin_lock(&se_tpg->session_lock); + atomic_dec(&se_nacl->mib_ref_count); + smp_mb__after_atomic_dec(); + atomic_dec(&se_sess->mib_ref_count); + smp_mb__after_atomic_dec(); + } + spin_unlock(&se_tpg->session_lock); + + return 0; +} + +static const struct seq_operations scsi_att_intr_port_seq_ops = { + .start = scsi_att_intr_port_seq_start, + .next = scsi_att_intr_port_seq_next, + .stop = scsi_att_intr_port_seq_stop, + .show = scsi_att_intr_port_seq_show +}; + +static int scsi_att_intr_port_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &scsi_att_intr_port_seq_ops); +} + +static const struct file_operations scsi_att_intr_port_seq_fops = { + .owner = THIS_MODULE, + .open = scsi_att_intr_port_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +/* + * SCSI Logical Unit Table + */ +static void *scsi_lu_seq_start(struct seq_file *seq, loff_t *pos) +{ + return locate_hba_start(seq, pos); +} + +static void *scsi_lu_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + return locate_hba_next(seq, v, pos); +} + +static void scsi_lu_seq_stop(struct seq_file *seq, void *v) +{ + locate_hba_stop(seq, v); +} + +#define SCSI_LU_INDEX 1 +static int scsi_lu_seq_show(struct seq_file *seq, void *v) +{ + struct se_hba *hba; + struct se_subsystem_dev *se_dev = list_entry(v, struct se_subsystem_dev, + g_se_dev_list); + struct se_device *dev = se_dev->se_dev_ptr; + int j; + char str[28]; + + if (list_is_first(&se_dev->g_se_dev_list, &se_global->g_se_dev_list)) + seq_puts(seq, "inst dev indx LUN lu_name vend prod rev" + " dev_type status state-bit num_cmds read_mbytes" + " write_mbytes resets full_stat hs_num_cmds creation_time\n"); + + if (!(dev)) + return 0; + + hba = dev->se_hba; + if (!(hba)) { + /* Log error ? */ + return 0; + } + + /* Fix LU state, if we can read it from the device */ + seq_printf(seq, "%u %u %u %llu %s", hba->hba_index, + dev->dev_index, SCSI_LU_INDEX, + (unsigned long long)0, /* FIXME: scsiLuDefaultLun */ + (strlen(DEV_T10_WWN(dev)->unit_serial)) ? + /* scsiLuWwnName */ + (char *)&DEV_T10_WWN(dev)->unit_serial[0] : + "None"); + + memcpy(&str[0], (void *)DEV_T10_WWN(dev), 28); + /* scsiLuVendorId */ + for (j = 0; j < 8; j++) + str[j] = ISPRINT(DEV_T10_WWN(dev)->vendor[j]) ? + DEV_T10_WWN(dev)->vendor[j] : 0x20; + str[8] = 0; + seq_printf(seq, " %s", str); + + /* scsiLuProductId */ + for (j = 0; j < 16; j++) + str[j] = ISPRINT(DEV_T10_WWN(dev)->model[j]) ? + DEV_T10_WWN(dev)->model[j] : 0x20; + str[16] = 0; + seq_printf(seq, " %s", str); + + /* scsiLuRevisionId */ + for (j = 0; j < 4; j++) + str[j] = ISPRINT(DEV_T10_WWN(dev)->revision[j]) ? + DEV_T10_WWN(dev)->revision[j] : 0x20; + str[4] = 0; + seq_printf(seq, " %s", str); + + seq_printf(seq, " %u %s %s %llu %u %u %u %u %u %u\n", + /* scsiLuPeripheralType */ + TRANSPORT(dev)->get_device_type(dev), + (dev->dev_status == TRANSPORT_DEVICE_ACTIVATED) ? + "available" : "notavailable", /* scsiLuStatus */ + "exposed", /* scsiLuState */ + (unsigned long long)dev->num_cmds, + /* scsiLuReadMegaBytes */ + (u32)(dev->read_bytes >> 20), + /* scsiLuWrittenMegaBytes */ + (u32)(dev->write_bytes >> 20), + dev->num_resets, /* scsiLuInResets */ + 0, /* scsiLuOutTaskSetFullStatus */ + 0, /* scsiLuHSInCommands */ + (u32)(((u32)dev->creation_time - INITIAL_JIFFIES) * + 100 / HZ)); + + return 0; +} + +static const struct seq_operations scsi_lu_seq_ops = { + .start = scsi_lu_seq_start, + .next = scsi_lu_seq_next, + .stop = scsi_lu_seq_stop, + .show = scsi_lu_seq_show +}; + +static int scsi_lu_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &scsi_lu_seq_ops); +} + +static const struct file_operations scsi_lu_seq_fops = { + .owner = THIS_MODULE, + .open = scsi_lu_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +/****************************************************************************/ + +/* + * Remove proc fs entries + */ +void remove_scsi_target_mib(void) +{ + remove_proc_entry("scsi_target/mib/scsi_inst", NULL); + remove_proc_entry("scsi_target/mib/scsi_dev", NULL); + remove_proc_entry("scsi_target/mib/scsi_port", NULL); + remove_proc_entry("scsi_target/mib/scsi_transport", NULL); + remove_proc_entry("scsi_target/mib/scsi_tgt_dev", NULL); + remove_proc_entry("scsi_target/mib/scsi_tgt_port", NULL); + remove_proc_entry("scsi_target/mib/scsi_auth_intr", NULL); + remove_proc_entry("scsi_target/mib/scsi_att_intr_port", NULL); + remove_proc_entry("scsi_target/mib/scsi_lu", NULL); + remove_proc_entry("scsi_target/mib", NULL); +} + +/* + * Create proc fs entries for the mib tables + */ +int init_scsi_target_mib(void) +{ + struct proc_dir_entry *dir_entry; + struct proc_dir_entry *scsi_inst_entry; + struct proc_dir_entry *scsi_dev_entry; + struct proc_dir_entry *scsi_port_entry; + struct proc_dir_entry *scsi_transport_entry; + struct proc_dir_entry *scsi_tgt_dev_entry; + struct proc_dir_entry *scsi_tgt_port_entry; + struct proc_dir_entry *scsi_auth_intr_entry; + struct proc_dir_entry *scsi_att_intr_port_entry; + struct proc_dir_entry *scsi_lu_entry; + + dir_entry = proc_mkdir("scsi_target/mib", NULL); + if (!(dir_entry)) { + printk(KERN_ERR "proc_mkdir() failed.\n"); + return -1; + } + + scsi_inst_entry = + create_proc_entry("scsi_target/mib/scsi_inst", 0, NULL); + if (scsi_inst_entry) + scsi_inst_entry->proc_fops = &scsi_inst_seq_fops; + else + goto error; + + scsi_dev_entry = + create_proc_entry("scsi_target/mib/scsi_dev", 0, NULL); + if (scsi_dev_entry) + scsi_dev_entry->proc_fops = &scsi_dev_seq_fops; + else + goto error; + + scsi_port_entry = + create_proc_entry("scsi_target/mib/scsi_port", 0, NULL); + if (scsi_port_entry) + scsi_port_entry->proc_fops = &scsi_port_seq_fops; + else + goto error; + + scsi_transport_entry = + create_proc_entry("scsi_target/mib/scsi_transport", 0, NULL); + if (scsi_transport_entry) + scsi_transport_entry->proc_fops = &scsi_transport_seq_fops; + else + goto error; + + scsi_tgt_dev_entry = + create_proc_entry("scsi_target/mib/scsi_tgt_dev", 0, NULL); + if (scsi_tgt_dev_entry) + scsi_tgt_dev_entry->proc_fops = &scsi_tgt_dev_seq_fops; + else + goto error; + + scsi_tgt_port_entry = + create_proc_entry("scsi_target/mib/scsi_tgt_port", 0, NULL); + if (scsi_tgt_port_entry) + scsi_tgt_port_entry->proc_fops = &scsi_tgt_port_seq_fops; + else + goto error; + + scsi_auth_intr_entry = + create_proc_entry("scsi_target/mib/scsi_auth_intr", 0, NULL); + if (scsi_auth_intr_entry) + scsi_auth_intr_entry->proc_fops = &scsi_auth_intr_seq_fops; + else + goto error; + + scsi_att_intr_port_entry = + create_proc_entry("scsi_target/mib/scsi_att_intr_port", 0, NULL); + if (scsi_att_intr_port_entry) + scsi_att_intr_port_entry->proc_fops = + &scsi_att_intr_port_seq_fops; + else + goto error; + + scsi_lu_entry = create_proc_entry("scsi_target/mib/scsi_lu", 0, NULL); + if (scsi_lu_entry) + scsi_lu_entry->proc_fops = &scsi_lu_seq_fops; + else + goto error; + + return 0; + +error: + printk(KERN_ERR "create_proc_entry() failed.\n"); + remove_scsi_target_mib(); + return -1; +} + +/* + * Initialize the index table for allocating unique row indexes to various mib + * tables + */ +void init_scsi_index_table(void) +{ + memset(&scsi_index_table, 0, sizeof(struct scsi_index_table)); + spin_lock_init(&scsi_index_table.lock); +} + +/* + * Allocate a new row index for the entry type specified + */ +u32 scsi_get_new_index(scsi_index_t type) +{ + u32 new_index; + + if ((type < 0) || (type >= SCSI_INDEX_TYPE_MAX)) { + printk(KERN_ERR "Invalid index type %d\n", type); + return -1; + } + + spin_lock(&scsi_index_table.lock); + new_index = ++scsi_index_table.scsi_mib_index[type]; + if (new_index == 0) + new_index = ++scsi_index_table.scsi_mib_index[type]; + spin_unlock(&scsi_index_table.lock); + + return new_index; +} +EXPORT_SYMBOL(scsi_get_new_index); diff --git a/drivers/target/target_core_mib.h b/drivers/target/target_core_mib.h new file mode 100644 index 000000000000..277204633850 --- /dev/null +++ b/drivers/target/target_core_mib.h @@ -0,0 +1,28 @@ +#ifndef TARGET_CORE_MIB_H +#define TARGET_CORE_MIB_H + +typedef enum { + SCSI_INST_INDEX, + SCSI_DEVICE_INDEX, + SCSI_AUTH_INTR_INDEX, + SCSI_INDEX_TYPE_MAX +} scsi_index_t; + +struct scsi_index_table { + spinlock_t lock; + u32 scsi_mib_index[SCSI_INDEX_TYPE_MAX]; +} ____cacheline_aligned; + +/* SCSI Port stats */ +struct scsi_port_stats { + u64 cmd_pdus; + u64 tx_data_octets; + u64 rx_data_octets; +} ____cacheline_aligned; + +extern int init_scsi_target_mib(void); +extern void remove_scsi_target_mib(void); +extern void init_scsi_index_table(void); +extern u32 scsi_get_new_index(scsi_index_t); + +#endif /*** TARGET_CORE_MIB_H ***/ diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c new file mode 100644 index 000000000000..2521f75362c3 --- /dev/null +++ b/drivers/target/target_core_pr.c @@ -0,0 +1,4252 @@ +/******************************************************************************* + * Filename: target_core_pr.c + * + * This file contains SPC-3 compliant persistent reservations and + * legacy SPC-2 reservations with compatible reservation handling (CRH=1) + * + * Copyright (c) 2009, 2010 Rising Tide Systems + * Copyright (c) 2009, 2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ******************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "target_core_hba.h" +#include "target_core_pr.h" +#include "target_core_ua.h" + +/* + * Used for Specify Initiator Ports Capable Bit (SPEC_I_PT) + */ +struct pr_transport_id_holder { + int dest_local_nexus; + struct t10_pr_registration *dest_pr_reg; + struct se_portal_group *dest_tpg; + struct se_node_acl *dest_node_acl; + struct se_dev_entry *dest_se_deve; + struct list_head dest_list; +}; + +int core_pr_dump_initiator_port( + struct t10_pr_registration *pr_reg, + char *buf, + u32 size) +{ + if (!(pr_reg->isid_present_at_reg)) + return 0; + + snprintf(buf, size, ",i,0x%s", &pr_reg->pr_reg_isid[0]); + return 1; +} + +static void __core_scsi3_complete_pro_release(struct se_device *, struct se_node_acl *, + struct t10_pr_registration *, int); + +static int core_scsi2_reservation_seq_non_holder( + struct se_cmd *cmd, + unsigned char *cdb, + u32 pr_reg_type) +{ + switch (cdb[0]) { + case INQUIRY: + case RELEASE: + case RELEASE_10: + return 0; + default: + return 1; + } + + return 1; +} + +static int core_scsi2_reservation_check(struct se_cmd *cmd, u32 *pr_reg_type) +{ + struct se_device *dev = cmd->se_dev; + struct se_session *sess = cmd->se_sess; + int ret; + + if (!(sess)) + return 0; + + spin_lock(&dev->dev_reservation_lock); + if (!dev->dev_reserved_node_acl || !sess) { + spin_unlock(&dev->dev_reservation_lock); + return 0; + } + if (dev->dev_reserved_node_acl != sess->se_node_acl) { + spin_unlock(&dev->dev_reservation_lock); + return -1; + } + if (!(dev->dev_flags & DF_SPC2_RESERVATIONS_WITH_ISID)) { + spin_unlock(&dev->dev_reservation_lock); + return 0; + } + ret = (dev->dev_res_bin_isid == sess->sess_bin_isid) ? 0 : -1; + spin_unlock(&dev->dev_reservation_lock); + + return ret; +} + +static int core_scsi2_reservation_release(struct se_cmd *cmd) +{ + struct se_device *dev = cmd->se_dev; + struct se_session *sess = cmd->se_sess; + struct se_portal_group *tpg = sess->se_tpg; + + if (!(sess) || !(tpg)) + return 0; + + spin_lock(&dev->dev_reservation_lock); + if (!dev->dev_reserved_node_acl || !sess) { + spin_unlock(&dev->dev_reservation_lock); + return 0; + } + + if (dev->dev_reserved_node_acl != sess->se_node_acl) { + spin_unlock(&dev->dev_reservation_lock); + return 0; + } + dev->dev_reserved_node_acl = NULL; + dev->dev_flags &= ~DF_SPC2_RESERVATIONS; + if (dev->dev_flags & DF_SPC2_RESERVATIONS_WITH_ISID) { + dev->dev_res_bin_isid = 0; + dev->dev_flags &= ~DF_SPC2_RESERVATIONS_WITH_ISID; + } + printk(KERN_INFO "SCSI-2 Released reservation for %s LUN: %u ->" + " MAPPED LUN: %u for %s\n", TPG_TFO(tpg)->get_fabric_name(), + SE_LUN(cmd)->unpacked_lun, cmd->se_deve->mapped_lun, + sess->se_node_acl->initiatorname); + spin_unlock(&dev->dev_reservation_lock); + + return 0; +} + +static int core_scsi2_reservation_reserve(struct se_cmd *cmd) +{ + struct se_device *dev = cmd->se_dev; + struct se_session *sess = cmd->se_sess; + struct se_portal_group *tpg = sess->se_tpg; + + if ((T_TASK(cmd)->t_task_cdb[1] & 0x01) && + (T_TASK(cmd)->t_task_cdb[1] & 0x02)) { + printk(KERN_ERR "LongIO and Obselete Bits set, returning" + " ILLEGAL_REQUEST\n"); + return PYX_TRANSPORT_ILLEGAL_REQUEST; + } + /* + * This is currently the case for target_core_mod passthrough struct se_cmd + * ops + */ + if (!(sess) || !(tpg)) + return 0; + + spin_lock(&dev->dev_reservation_lock); + if (dev->dev_reserved_node_acl && + (dev->dev_reserved_node_acl != sess->se_node_acl)) { + printk(KERN_ERR "SCSI-2 RESERVATION CONFLIFT for %s fabric\n", + TPG_TFO(tpg)->get_fabric_name()); + printk(KERN_ERR "Original reserver LUN: %u %s\n", + SE_LUN(cmd)->unpacked_lun, + dev->dev_reserved_node_acl->initiatorname); + printk(KERN_ERR "Current attempt - LUN: %u -> MAPPED LUN: %u" + " from %s \n", SE_LUN(cmd)->unpacked_lun, + cmd->se_deve->mapped_lun, + sess->se_node_acl->initiatorname); + spin_unlock(&dev->dev_reservation_lock); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + + dev->dev_reserved_node_acl = sess->se_node_acl; + dev->dev_flags |= DF_SPC2_RESERVATIONS; + if (sess->sess_bin_isid != 0) { + dev->dev_res_bin_isid = sess->sess_bin_isid; + dev->dev_flags |= DF_SPC2_RESERVATIONS_WITH_ISID; + } + printk(KERN_INFO "SCSI-2 Reserved %s LUN: %u -> MAPPED LUN: %u" + " for %s\n", TPG_TFO(tpg)->get_fabric_name(), + SE_LUN(cmd)->unpacked_lun, cmd->se_deve->mapped_lun, + sess->se_node_acl->initiatorname); + spin_unlock(&dev->dev_reservation_lock); + + return 0; +} + +static struct t10_pr_registration *core_scsi3_locate_pr_reg(struct se_device *, + struct se_node_acl *, struct se_session *); +static void core_scsi3_put_pr_reg(struct t10_pr_registration *); + +/* + * Setup in target_core_transport.c:transport_generic_cmd_sequencer() + * and called via struct se_cmd->transport_emulate_cdb() in TCM processing + * thread context. + */ +int core_scsi2_emulate_crh(struct se_cmd *cmd) +{ + struct se_session *se_sess = cmd->se_sess; + struct se_subsystem_dev *su_dev = cmd->se_dev->se_sub_dev; + struct t10_pr_registration *pr_reg; + struct t10_reservation_template *pr_tmpl = &su_dev->t10_reservation; + unsigned char *cdb = &T_TASK(cmd)->t_task_cdb[0]; + int crh = (T10_RES(su_dev)->res_type == SPC3_PERSISTENT_RESERVATIONS); + int conflict = 0; + + if (!(se_sess)) + return 0; + + if (!(crh)) + goto after_crh; + + pr_reg = core_scsi3_locate_pr_reg(cmd->se_dev, se_sess->se_node_acl, + se_sess); + if (pr_reg) { + /* + * From spc4r17 5.7.3 Exceptions to SPC-2 RESERVE and RELEASE + * behavior + * + * A RESERVE(6) or RESERVE(10) command shall complete with GOOD + * status, but no reservation shall be established and the + * persistent reservation shall not be changed, if the command + * is received from a) and b) below. + * + * A RELEASE(6) or RELEASE(10) command shall complete with GOOD + * status, but the persistent reservation shall not be released, + * if the command is received from a) and b) + * + * a) An I_T nexus that is a persistent reservation holder; or + * b) An I_T nexus that is registered if a registrants only or + * all registrants type persistent reservation is present. + * + * In all other cases, a RESERVE(6) command, RESERVE(10) command, + * RELEASE(6) command, or RELEASE(10) command shall be processed + * as defined in SPC-2. + */ + if (pr_reg->pr_res_holder) { + core_scsi3_put_pr_reg(pr_reg); + return 0; + } + if ((pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY) || + (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY) || + (pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || + (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) { + core_scsi3_put_pr_reg(pr_reg); + return 0; + } + core_scsi3_put_pr_reg(pr_reg); + conflict = 1; + } else { + /* + * Following spc2r20 5.5.1 Reservations overview: + * + * If a logical unit has executed a PERSISTENT RESERVE OUT + * command with the REGISTER or the REGISTER AND IGNORE + * EXISTING KEY service action and is still registered by any + * initiator, all RESERVE commands and all RELEASE commands + * regardless of initiator shall conflict and shall terminate + * with a RESERVATION CONFLICT status. + */ + spin_lock(&pr_tmpl->registration_lock); + conflict = (list_empty(&pr_tmpl->registration_list)) ? 0 : 1; + spin_unlock(&pr_tmpl->registration_lock); + } + + if (conflict) { + printk(KERN_ERR "Received legacy SPC-2 RESERVE/RELEASE" + " while active SPC-3 registrations exist," + " returning RESERVATION_CONFLICT\n"); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + +after_crh: + if ((cdb[0] == RESERVE) || (cdb[0] == RESERVE_10)) + return core_scsi2_reservation_reserve(cmd); + else if ((cdb[0] == RELEASE) || (cdb[0] == RELEASE_10)) + return core_scsi2_reservation_release(cmd); + else + return PYX_TRANSPORT_INVALID_CDB_FIELD; +} + +/* + * Begin SPC-3/SPC-4 Persistent Reservations emulation support + * + * This function is called by those initiator ports who are *NOT* + * the active PR reservation holder when a reservation is present. + */ +static int core_scsi3_pr_seq_non_holder( + struct se_cmd *cmd, + unsigned char *cdb, + u32 pr_reg_type) +{ + struct se_dev_entry *se_deve; + struct se_session *se_sess = SE_SESS(cmd); + int other_cdb = 0, ignore_reg; + int registered_nexus = 0, ret = 1; /* Conflict by default */ + int all_reg = 0, reg_only = 0; /* ALL_REG, REG_ONLY */ + int we = 0; /* Write Exclusive */ + int legacy = 0; /* Act like a legacy device and return + * RESERVATION CONFLICT on some CDBs */ + /* + * A legacy SPC-2 reservation is being held. + */ + if (cmd->se_dev->dev_flags & DF_SPC2_RESERVATIONS) + return core_scsi2_reservation_seq_non_holder(cmd, + cdb, pr_reg_type); + + se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; + /* + * Determine if the registration should be ignored due to + * non-matching ISIDs in core_scsi3_pr_reservation_check(). + */ + ignore_reg = (pr_reg_type & 0x80000000); + if (ignore_reg) + pr_reg_type &= ~0x80000000; + + switch (pr_reg_type) { + case PR_TYPE_WRITE_EXCLUSIVE: + we = 1; + case PR_TYPE_EXCLUSIVE_ACCESS: + /* + * Some commands are only allowed for the persistent reservation + * holder. + */ + if ((se_deve->def_pr_registered) && !(ignore_reg)) + registered_nexus = 1; + break; + case PR_TYPE_WRITE_EXCLUSIVE_REGONLY: + we = 1; + case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY: + /* + * Some commands are only allowed for registered I_T Nexuses. + */ + reg_only = 1; + if ((se_deve->def_pr_registered) && !(ignore_reg)) + registered_nexus = 1; + break; + case PR_TYPE_WRITE_EXCLUSIVE_ALLREG: + we = 1; + case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG: + /* + * Each registered I_T Nexus is a reservation holder. + */ + all_reg = 1; + if ((se_deve->def_pr_registered) && !(ignore_reg)) + registered_nexus = 1; + break; + default: + return -1; + } + /* + * Referenced from spc4r17 table 45 for *NON* PR holder access + */ + switch (cdb[0]) { + case SECURITY_PROTOCOL_IN: + if (registered_nexus) + return 0; + ret = (we) ? 0 : 1; + break; + case MODE_SENSE: + case MODE_SENSE_10: + case READ_ATTRIBUTE: + case READ_BUFFER: + case RECEIVE_DIAGNOSTIC: + if (legacy) { + ret = 1; + break; + } + if (registered_nexus) { + ret = 0; + break; + } + ret = (we) ? 0 : 1; /* Allowed Write Exclusive */ + break; + case PERSISTENT_RESERVE_OUT: + /* + * This follows PERSISTENT_RESERVE_OUT service actions that + * are allowed in the presence of various reservations. + * See spc4r17, table 46 + */ + switch (cdb[1] & 0x1f) { + case PRO_CLEAR: + case PRO_PREEMPT: + case PRO_PREEMPT_AND_ABORT: + ret = (registered_nexus) ? 0 : 1; + break; + case PRO_REGISTER: + case PRO_REGISTER_AND_IGNORE_EXISTING_KEY: + ret = 0; + break; + case PRO_REGISTER_AND_MOVE: + case PRO_RESERVE: + ret = 1; + break; + case PRO_RELEASE: + ret = (registered_nexus) ? 0 : 1; + break; + default: + printk(KERN_ERR "Unknown PERSISTENT_RESERVE_OUT service" + " action: 0x%02x\n", cdb[1] & 0x1f); + return -1; + } + break; + case RELEASE: + case RELEASE_10: + /* Handled by CRH=1 in core_scsi2_emulate_crh() */ + ret = 0; + break; + case RESERVE: + case RESERVE_10: + /* Handled by CRH=1 in core_scsi2_emulate_crh() */ + ret = 0; + break; + case TEST_UNIT_READY: + ret = (legacy) ? 1 : 0; /* Conflict for legacy */ + break; + case MAINTENANCE_IN: + switch (cdb[1] & 0x1f) { + case MI_MANAGEMENT_PROTOCOL_IN: + if (registered_nexus) { + ret = 0; + break; + } + ret = (we) ? 0 : 1; /* Allowed Write Exclusive */ + break; + case MI_REPORT_SUPPORTED_OPERATION_CODES: + case MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS: + if (legacy) { + ret = 1; + break; + } + if (registered_nexus) { + ret = 0; + break; + } + ret = (we) ? 0 : 1; /* Allowed Write Exclusive */ + break; + case MI_REPORT_ALIASES: + case MI_REPORT_IDENTIFYING_INFORMATION: + case MI_REPORT_PRIORITY: + case MI_REPORT_TARGET_PGS: + case MI_REPORT_TIMESTAMP: + ret = 0; /* Allowed */ + break; + default: + printk(KERN_ERR "Unknown MI Service Action: 0x%02x\n", + (cdb[1] & 0x1f)); + return -1; + } + break; + case ACCESS_CONTROL_IN: + case ACCESS_CONTROL_OUT: + case INQUIRY: + case LOG_SENSE: + case READ_MEDIA_SERIAL_NUMBER: + case REPORT_LUNS: + case REQUEST_SENSE: + ret = 0; /*/ Allowed CDBs */ + break; + default: + other_cdb = 1; + break; + } + /* + * Case where the CDB is explictly allowed in the above switch + * statement. + */ + if (!(ret) && !(other_cdb)) { +#if 0 + printk(KERN_INFO "Allowing explict CDB: 0x%02x for %s" + " reservation holder\n", cdb[0], + core_scsi3_pr_dump_type(pr_reg_type)); +#endif + return ret; + } + /* + * Check if write exclusive initiator ports *NOT* holding the + * WRITE_EXCLUSIVE_* reservation. + */ + if ((we) && !(registered_nexus)) { + if (cmd->data_direction == DMA_TO_DEVICE) { + /* + * Conflict for write exclusive + */ + printk(KERN_INFO "%s Conflict for unregistered nexus" + " %s CDB: 0x%02x to %s reservation\n", + transport_dump_cmd_direction(cmd), + se_sess->se_node_acl->initiatorname, cdb[0], + core_scsi3_pr_dump_type(pr_reg_type)); + return 1; + } else { + /* + * Allow non WRITE CDBs for all Write Exclusive + * PR TYPEs to pass for registered and + * non-registered_nexuxes NOT holding the reservation. + * + * We only make noise for the unregisterd nexuses, + * as we expect registered non-reservation holding + * nexuses to issue CDBs. + */ +#if 0 + if (!(registered_nexus)) { + printk(KERN_INFO "Allowing implict CDB: 0x%02x" + " for %s reservation on unregistered" + " nexus\n", cdb[0], + core_scsi3_pr_dump_type(pr_reg_type)); + } +#endif + return 0; + } + } else if ((reg_only) || (all_reg)) { + if (registered_nexus) { + /* + * For PR_*_REG_ONLY and PR_*_ALL_REG reservations, + * allow commands from registered nexuses. + */ +#if 0 + printk(KERN_INFO "Allowing implict CDB: 0x%02x for %s" + " reservation\n", cdb[0], + core_scsi3_pr_dump_type(pr_reg_type)); +#endif + return 0; + } + } + printk(KERN_INFO "%s Conflict for %sregistered nexus %s CDB: 0x%2x" + " for %s reservation\n", transport_dump_cmd_direction(cmd), + (registered_nexus) ? "" : "un", + se_sess->se_node_acl->initiatorname, cdb[0], + core_scsi3_pr_dump_type(pr_reg_type)); + + return 1; /* Conflict by default */ +} + +static u32 core_scsi3_pr_generation(struct se_device *dev) +{ + struct se_subsystem_dev *su_dev = SU_DEV(dev); + u32 prg; + /* + * PRGeneration field shall contain the value of a 32-bit wrapping + * counter mainted by the device server. + * + * Note that this is done regardless of Active Persist across + * Target PowerLoss (APTPL) + * + * See spc4r17 section 6.3.12 READ_KEYS service action + */ + spin_lock(&dev->dev_reservation_lock); + prg = T10_RES(su_dev)->pr_generation++; + spin_unlock(&dev->dev_reservation_lock); + + return prg; +} + +static int core_scsi3_pr_reservation_check( + struct se_cmd *cmd, + u32 *pr_reg_type) +{ + struct se_device *dev = cmd->se_dev; + struct se_session *sess = cmd->se_sess; + int ret; + + if (!(sess)) + return 0; + /* + * A legacy SPC-2 reservation is being held. + */ + if (dev->dev_flags & DF_SPC2_RESERVATIONS) + return core_scsi2_reservation_check(cmd, pr_reg_type); + + spin_lock(&dev->dev_reservation_lock); + if (!(dev->dev_pr_res_holder)) { + spin_unlock(&dev->dev_reservation_lock); + return 0; + } + *pr_reg_type = dev->dev_pr_res_holder->pr_res_type; + cmd->pr_res_key = dev->dev_pr_res_holder->pr_res_key; + if (dev->dev_pr_res_holder->pr_reg_nacl != sess->se_node_acl) { + spin_unlock(&dev->dev_reservation_lock); + return -1; + } + if (!(dev->dev_pr_res_holder->isid_present_at_reg)) { + spin_unlock(&dev->dev_reservation_lock); + return 0; + } + ret = (dev->dev_pr_res_holder->pr_reg_bin_isid == + sess->sess_bin_isid) ? 0 : -1; + /* + * Use bit in *pr_reg_type to notify ISID mismatch in + * core_scsi3_pr_seq_non_holder(). + */ + if (ret != 0) + *pr_reg_type |= 0x80000000; + spin_unlock(&dev->dev_reservation_lock); + + return ret; +} + +static struct t10_pr_registration *__core_scsi3_do_alloc_registration( + struct se_device *dev, + struct se_node_acl *nacl, + struct se_dev_entry *deve, + unsigned char *isid, + u64 sa_res_key, + int all_tg_pt, + int aptpl) +{ + struct se_subsystem_dev *su_dev = SU_DEV(dev); + struct t10_pr_registration *pr_reg; + + pr_reg = kmem_cache_zalloc(t10_pr_reg_cache, GFP_ATOMIC); + if (!(pr_reg)) { + printk(KERN_ERR "Unable to allocate struct t10_pr_registration\n"); + return NULL; + } + + pr_reg->pr_aptpl_buf = kzalloc(T10_RES(su_dev)->pr_aptpl_buf_len, + GFP_ATOMIC); + if (!(pr_reg->pr_aptpl_buf)) { + printk(KERN_ERR "Unable to allocate pr_reg->pr_aptpl_buf\n"); + kmem_cache_free(t10_pr_reg_cache, pr_reg); + return NULL; + } + + INIT_LIST_HEAD(&pr_reg->pr_reg_list); + INIT_LIST_HEAD(&pr_reg->pr_reg_abort_list); + INIT_LIST_HEAD(&pr_reg->pr_reg_aptpl_list); + INIT_LIST_HEAD(&pr_reg->pr_reg_atp_list); + INIT_LIST_HEAD(&pr_reg->pr_reg_atp_mem_list); + atomic_set(&pr_reg->pr_res_holders, 0); + pr_reg->pr_reg_nacl = nacl; + pr_reg->pr_reg_deve = deve; + pr_reg->pr_res_mapped_lun = deve->mapped_lun; + pr_reg->pr_aptpl_target_lun = deve->se_lun->unpacked_lun; + pr_reg->pr_res_key = sa_res_key; + pr_reg->pr_reg_all_tg_pt = all_tg_pt; + pr_reg->pr_reg_aptpl = aptpl; + pr_reg->pr_reg_tg_pt_lun = deve->se_lun; + /* + * If an ISID value for this SCSI Initiator Port exists, + * save it to the registration now. + */ + if (isid != NULL) { + pr_reg->pr_reg_bin_isid = get_unaligned_be64(isid); + snprintf(pr_reg->pr_reg_isid, PR_REG_ISID_LEN, "%s", isid); + pr_reg->isid_present_at_reg = 1; + } + + return pr_reg; +} + +static int core_scsi3_lunacl_depend_item(struct se_dev_entry *); +static void core_scsi3_lunacl_undepend_item(struct se_dev_entry *); + +/* + * Function used for handling PR registrations for ALL_TG_PT=1 and ALL_TG_PT=0 + * modes. + */ +static struct t10_pr_registration *__core_scsi3_alloc_registration( + struct se_device *dev, + struct se_node_acl *nacl, + struct se_dev_entry *deve, + unsigned char *isid, + u64 sa_res_key, + int all_tg_pt, + int aptpl) +{ + struct se_dev_entry *deve_tmp; + struct se_node_acl *nacl_tmp; + struct se_port *port, *port_tmp; + struct target_core_fabric_ops *tfo = nacl->se_tpg->se_tpg_tfo; + struct t10_pr_registration *pr_reg, *pr_reg_atp, *pr_reg_tmp, *pr_reg_tmp_safe; + int ret; + /* + * Create a registration for the I_T Nexus upon which the + * PROUT REGISTER was received. + */ + pr_reg = __core_scsi3_do_alloc_registration(dev, nacl, deve, isid, + sa_res_key, all_tg_pt, aptpl); + if (!(pr_reg)) + return NULL; + /* + * Return pointer to pr_reg for ALL_TG_PT=0 + */ + if (!(all_tg_pt)) + return pr_reg; + /* + * Create list of matching SCSI Initiator Port registrations + * for ALL_TG_PT=1 + */ + spin_lock(&dev->se_port_lock); + list_for_each_entry_safe(port, port_tmp, &dev->dev_sep_list, sep_list) { + atomic_inc(&port->sep_tg_pt_ref_cnt); + smp_mb__after_atomic_inc(); + spin_unlock(&dev->se_port_lock); + + spin_lock_bh(&port->sep_alua_lock); + list_for_each_entry(deve_tmp, &port->sep_alua_list, + alua_port_list) { + /* + * This pointer will be NULL for demo mode MappedLUNs + * that have not been make explict via a ConfigFS + * MappedLUN group for the SCSI Initiator Node ACL. + */ + if (!(deve_tmp->se_lun_acl)) + continue; + + nacl_tmp = deve_tmp->se_lun_acl->se_lun_nacl; + /* + * Skip the matching struct se_node_acl that is allocated + * above.. + */ + if (nacl == nacl_tmp) + continue; + /* + * Only perform PR registrations for target ports on + * the same fabric module as the REGISTER w/ ALL_TG_PT=1 + * arrived. + */ + if (tfo != nacl_tmp->se_tpg->se_tpg_tfo) + continue; + /* + * Look for a matching Initiator Node ACL in ASCII format + */ + if (strcmp(nacl->initiatorname, nacl_tmp->initiatorname)) + continue; + + atomic_inc(&deve_tmp->pr_ref_count); + smp_mb__after_atomic_inc(); + spin_unlock_bh(&port->sep_alua_lock); + /* + * Grab a configfs group dependency that is released + * for the exception path at label out: below, or upon + * completion of adding ALL_TG_PT=1 registrations in + * __core_scsi3_add_registration() + */ + ret = core_scsi3_lunacl_depend_item(deve_tmp); + if (ret < 0) { + printk(KERN_ERR "core_scsi3_lunacl_depend" + "_item() failed\n"); + atomic_dec(&port->sep_tg_pt_ref_cnt); + smp_mb__after_atomic_dec(); + atomic_dec(&deve_tmp->pr_ref_count); + smp_mb__after_atomic_dec(); + goto out; + } + /* + * Located a matching SCSI Initiator Port on a different + * port, allocate the pr_reg_atp and attach it to the + * pr_reg->pr_reg_atp_list that will be processed once + * the original *pr_reg is processed in + * __core_scsi3_add_registration() + */ + pr_reg_atp = __core_scsi3_do_alloc_registration(dev, + nacl_tmp, deve_tmp, NULL, + sa_res_key, all_tg_pt, aptpl); + if (!(pr_reg_atp)) { + atomic_dec(&port->sep_tg_pt_ref_cnt); + smp_mb__after_atomic_dec(); + atomic_dec(&deve_tmp->pr_ref_count); + smp_mb__after_atomic_dec(); + core_scsi3_lunacl_undepend_item(deve_tmp); + goto out; + } + + list_add_tail(&pr_reg_atp->pr_reg_atp_mem_list, + &pr_reg->pr_reg_atp_list); + spin_lock_bh(&port->sep_alua_lock); + } + spin_unlock_bh(&port->sep_alua_lock); + + spin_lock(&dev->se_port_lock); + atomic_dec(&port->sep_tg_pt_ref_cnt); + smp_mb__after_atomic_dec(); + } + spin_unlock(&dev->se_port_lock); + + return pr_reg; +out: + list_for_each_entry_safe(pr_reg_tmp, pr_reg_tmp_safe, + &pr_reg->pr_reg_atp_list, pr_reg_atp_mem_list) { + list_del(&pr_reg_tmp->pr_reg_atp_mem_list); + core_scsi3_lunacl_undepend_item(pr_reg_tmp->pr_reg_deve); + kmem_cache_free(t10_pr_reg_cache, pr_reg_tmp); + } + kmem_cache_free(t10_pr_reg_cache, pr_reg); + return NULL; +} + +int core_scsi3_alloc_aptpl_registration( + struct t10_reservation_template *pr_tmpl, + u64 sa_res_key, + unsigned char *i_port, + unsigned char *isid, + u32 mapped_lun, + unsigned char *t_port, + u16 tpgt, + u32 target_lun, + int res_holder, + int all_tg_pt, + u8 type) +{ + struct t10_pr_registration *pr_reg; + + if (!(i_port) || !(t_port) || !(sa_res_key)) { + printk(KERN_ERR "Illegal parameters for APTPL registration\n"); + return -1; + } + + pr_reg = kmem_cache_zalloc(t10_pr_reg_cache, GFP_KERNEL); + if (!(pr_reg)) { + printk(KERN_ERR "Unable to allocate struct t10_pr_registration\n"); + return -1; + } + pr_reg->pr_aptpl_buf = kzalloc(pr_tmpl->pr_aptpl_buf_len, GFP_KERNEL); + + INIT_LIST_HEAD(&pr_reg->pr_reg_list); + INIT_LIST_HEAD(&pr_reg->pr_reg_abort_list); + INIT_LIST_HEAD(&pr_reg->pr_reg_aptpl_list); + INIT_LIST_HEAD(&pr_reg->pr_reg_atp_list); + INIT_LIST_HEAD(&pr_reg->pr_reg_atp_mem_list); + atomic_set(&pr_reg->pr_res_holders, 0); + pr_reg->pr_reg_nacl = NULL; + pr_reg->pr_reg_deve = NULL; + pr_reg->pr_res_mapped_lun = mapped_lun; + pr_reg->pr_aptpl_target_lun = target_lun; + pr_reg->pr_res_key = sa_res_key; + pr_reg->pr_reg_all_tg_pt = all_tg_pt; + pr_reg->pr_reg_aptpl = 1; + pr_reg->pr_reg_tg_pt_lun = NULL; + pr_reg->pr_res_scope = 0; /* Always LUN_SCOPE */ + pr_reg->pr_res_type = type; + /* + * If an ISID value had been saved in APTPL metadata for this + * SCSI Initiator Port, restore it now. + */ + if (isid != NULL) { + pr_reg->pr_reg_bin_isid = get_unaligned_be64(isid); + snprintf(pr_reg->pr_reg_isid, PR_REG_ISID_LEN, "%s", isid); + pr_reg->isid_present_at_reg = 1; + } + /* + * Copy the i_port and t_port information from caller. + */ + snprintf(pr_reg->pr_iport, PR_APTPL_MAX_IPORT_LEN, "%s", i_port); + snprintf(pr_reg->pr_tport, PR_APTPL_MAX_TPORT_LEN, "%s", t_port); + pr_reg->pr_reg_tpgt = tpgt; + /* + * Set pr_res_holder from caller, the pr_reg who is the reservation + * holder will get it's pointer set in core_scsi3_aptpl_reserve() once + * the Initiator Node LUN ACL from the fabric module is created for + * this registration. + */ + pr_reg->pr_res_holder = res_holder; + + list_add_tail(&pr_reg->pr_reg_aptpl_list, &pr_tmpl->aptpl_reg_list); + printk(KERN_INFO "SPC-3 PR APTPL Successfully added registration%s from" + " metadata\n", (res_holder) ? "+reservation" : ""); + return 0; +} + +static void core_scsi3_aptpl_reserve( + struct se_device *dev, + struct se_portal_group *tpg, + struct se_node_acl *node_acl, + struct t10_pr_registration *pr_reg) +{ + char i_buf[PR_REG_ISID_ID_LEN]; + int prf_isid; + + memset(i_buf, 0, PR_REG_ISID_ID_LEN); + prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + + spin_lock(&dev->dev_reservation_lock); + dev->dev_pr_res_holder = pr_reg; + spin_unlock(&dev->dev_reservation_lock); + + printk(KERN_INFO "SPC-3 PR [%s] Service Action: APTPL RESERVE created" + " new reservation holder TYPE: %s ALL_TG_PT: %d\n", + TPG_TFO(tpg)->get_fabric_name(), + core_scsi3_pr_dump_type(pr_reg->pr_res_type), + (pr_reg->pr_reg_all_tg_pt) ? 1 : 0); + printk(KERN_INFO "SPC-3 PR [%s] RESERVE Node: %s%s\n", + TPG_TFO(tpg)->get_fabric_name(), node_acl->initiatorname, + (prf_isid) ? &i_buf[0] : ""); +} + +static void __core_scsi3_add_registration(struct se_device *, struct se_node_acl *, + struct t10_pr_registration *, int, int); + +static int __core_scsi3_check_aptpl_registration( + struct se_device *dev, + struct se_portal_group *tpg, + struct se_lun *lun, + u32 target_lun, + struct se_node_acl *nacl, + struct se_dev_entry *deve) +{ + struct t10_pr_registration *pr_reg, *pr_reg_tmp; + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + unsigned char i_port[PR_APTPL_MAX_IPORT_LEN]; + unsigned char t_port[PR_APTPL_MAX_TPORT_LEN]; + u16 tpgt; + + memset(i_port, 0, PR_APTPL_MAX_IPORT_LEN); + memset(t_port, 0, PR_APTPL_MAX_TPORT_LEN); + /* + * Copy Initiator Port information from struct se_node_acl + */ + snprintf(i_port, PR_APTPL_MAX_IPORT_LEN, "%s", nacl->initiatorname); + snprintf(t_port, PR_APTPL_MAX_TPORT_LEN, "%s", + TPG_TFO(tpg)->tpg_get_wwn(tpg)); + tpgt = TPG_TFO(tpg)->tpg_get_tag(tpg); + /* + * Look for the matching registrations+reservation from those + * created from APTPL metadata. Note that multiple registrations + * may exist for fabrics that use ISIDs in their SCSI Initiator Port + * TransportIDs. + */ + spin_lock(&pr_tmpl->aptpl_reg_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->aptpl_reg_list, + pr_reg_aptpl_list) { + if (!(strcmp(pr_reg->pr_iport, i_port)) && + (pr_reg->pr_res_mapped_lun == deve->mapped_lun) && + !(strcmp(pr_reg->pr_tport, t_port)) && + (pr_reg->pr_reg_tpgt == tpgt) && + (pr_reg->pr_aptpl_target_lun == target_lun)) { + + pr_reg->pr_reg_nacl = nacl; + pr_reg->pr_reg_deve = deve; + pr_reg->pr_reg_tg_pt_lun = lun; + + list_del(&pr_reg->pr_reg_aptpl_list); + spin_unlock(&pr_tmpl->aptpl_reg_lock); + /* + * At this point all of the pointers in *pr_reg will + * be setup, so go ahead and add the registration. + */ + + __core_scsi3_add_registration(dev, nacl, pr_reg, 0, 0); + /* + * If this registration is the reservation holder, + * make that happen now.. + */ + if (pr_reg->pr_res_holder) + core_scsi3_aptpl_reserve(dev, tpg, + nacl, pr_reg); + /* + * Reenable pr_aptpl_active to accept new metadata + * updates once the SCSI device is active again.. + */ + spin_lock(&pr_tmpl->aptpl_reg_lock); + pr_tmpl->pr_aptpl_active = 1; + } + } + spin_unlock(&pr_tmpl->aptpl_reg_lock); + + return 0; +} + +int core_scsi3_check_aptpl_registration( + struct se_device *dev, + struct se_portal_group *tpg, + struct se_lun *lun, + struct se_lun_acl *lun_acl) +{ + struct se_subsystem_dev *su_dev = SU_DEV(dev); + struct se_node_acl *nacl = lun_acl->se_lun_nacl; + struct se_dev_entry *deve = &nacl->device_list[lun_acl->mapped_lun]; + + if (T10_RES(su_dev)->res_type != SPC3_PERSISTENT_RESERVATIONS) + return 0; + + return __core_scsi3_check_aptpl_registration(dev, tpg, lun, + lun->unpacked_lun, nacl, deve); +} + +static void __core_scsi3_dump_registration( + struct target_core_fabric_ops *tfo, + struct se_device *dev, + struct se_node_acl *nacl, + struct t10_pr_registration *pr_reg, + int register_type) +{ + struct se_portal_group *se_tpg = nacl->se_tpg; + char i_buf[PR_REG_ISID_ID_LEN]; + int prf_isid; + + memset(&i_buf[0], 0, PR_REG_ISID_ID_LEN); + prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + + printk(KERN_INFO "SPC-3 PR [%s] Service Action: REGISTER%s Initiator" + " Node: %s%s\n", tfo->get_fabric_name(), (register_type == 2) ? + "_AND_MOVE" : (register_type == 1) ? + "_AND_IGNORE_EXISTING_KEY" : "", nacl->initiatorname, + (prf_isid) ? i_buf : ""); + printk(KERN_INFO "SPC-3 PR [%s] registration on Target Port: %s,0x%04x\n", + tfo->get_fabric_name(), tfo->tpg_get_wwn(se_tpg), + tfo->tpg_get_tag(se_tpg)); + printk(KERN_INFO "SPC-3 PR [%s] for %s TCM Subsystem %s Object Target" + " Port(s)\n", tfo->get_fabric_name(), + (pr_reg->pr_reg_all_tg_pt) ? "ALL" : "SINGLE", + TRANSPORT(dev)->name); + printk(KERN_INFO "SPC-3 PR [%s] SA Res Key: 0x%016Lx PRgeneration:" + " 0x%08x APTPL: %d\n", tfo->get_fabric_name(), + pr_reg->pr_res_key, pr_reg->pr_res_generation, + pr_reg->pr_reg_aptpl); +} + +/* + * this function can be called with struct se_device->dev_reservation_lock + * when register_move = 1 + */ +static void __core_scsi3_add_registration( + struct se_device *dev, + struct se_node_acl *nacl, + struct t10_pr_registration *pr_reg, + int register_type, + int register_move) +{ + struct se_subsystem_dev *su_dev = SU_DEV(dev); + struct target_core_fabric_ops *tfo = nacl->se_tpg->se_tpg_tfo; + struct t10_pr_registration *pr_reg_tmp, *pr_reg_tmp_safe; + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + + /* + * Increment PRgeneration counter for struct se_device upon a successful + * REGISTER, see spc4r17 section 6.3.2 READ_KEYS service action + * + * Also, when register_move = 1 for PROUT REGISTER_AND_MOVE service + * action, the struct se_device->dev_reservation_lock will already be held, + * so we do not call core_scsi3_pr_generation() which grabs the lock + * for the REGISTER. + */ + pr_reg->pr_res_generation = (register_move) ? + T10_RES(su_dev)->pr_generation++ : + core_scsi3_pr_generation(dev); + + spin_lock(&pr_tmpl->registration_lock); + list_add_tail(&pr_reg->pr_reg_list, &pr_tmpl->registration_list); + pr_reg->pr_reg_deve->def_pr_registered = 1; + + __core_scsi3_dump_registration(tfo, dev, nacl, pr_reg, register_type); + spin_unlock(&pr_tmpl->registration_lock); + /* + * Skip extra processing for ALL_TG_PT=0 or REGISTER_AND_MOVE. + */ + if (!(pr_reg->pr_reg_all_tg_pt) || (register_move)) + return; + /* + * Walk pr_reg->pr_reg_atp_list and add registrations for ALL_TG_PT=1 + * allocated in __core_scsi3_alloc_registration() + */ + list_for_each_entry_safe(pr_reg_tmp, pr_reg_tmp_safe, + &pr_reg->pr_reg_atp_list, pr_reg_atp_mem_list) { + list_del(&pr_reg_tmp->pr_reg_atp_mem_list); + + pr_reg_tmp->pr_res_generation = core_scsi3_pr_generation(dev); + + spin_lock(&pr_tmpl->registration_lock); + list_add_tail(&pr_reg_tmp->pr_reg_list, + &pr_tmpl->registration_list); + pr_reg_tmp->pr_reg_deve->def_pr_registered = 1; + + __core_scsi3_dump_registration(tfo, dev, + pr_reg_tmp->pr_reg_nacl, pr_reg_tmp, + register_type); + spin_unlock(&pr_tmpl->registration_lock); + /* + * Drop configfs group dependency reference from + * __core_scsi3_alloc_registration() + */ + core_scsi3_lunacl_undepend_item(pr_reg_tmp->pr_reg_deve); + } +} + +static int core_scsi3_alloc_registration( + struct se_device *dev, + struct se_node_acl *nacl, + struct se_dev_entry *deve, + unsigned char *isid, + u64 sa_res_key, + int all_tg_pt, + int aptpl, + int register_type, + int register_move) +{ + struct t10_pr_registration *pr_reg; + + pr_reg = __core_scsi3_alloc_registration(dev, nacl, deve, isid, + sa_res_key, all_tg_pt, aptpl); + if (!(pr_reg)) + return -1; + + __core_scsi3_add_registration(dev, nacl, pr_reg, + register_type, register_move); + return 0; +} + +static struct t10_pr_registration *__core_scsi3_locate_pr_reg( + struct se_device *dev, + struct se_node_acl *nacl, + unsigned char *isid) +{ + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + struct t10_pr_registration *pr_reg, *pr_reg_tmp; + struct se_portal_group *tpg; + + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, + &pr_tmpl->registration_list, pr_reg_list) { + /* + * First look for a matching struct se_node_acl + */ + if (pr_reg->pr_reg_nacl != nacl) + continue; + + tpg = pr_reg->pr_reg_nacl->se_tpg; + /* + * If this registration does NOT contain a fabric provided + * ISID, then we have found a match. + */ + if (!(pr_reg->isid_present_at_reg)) { + /* + * Determine if this SCSI device server requires that + * SCSI Intiatior TransportID w/ ISIDs is enforced + * for fabric modules (iSCSI) requiring them. + */ + if (TPG_TFO(tpg)->sess_get_initiator_sid != NULL) { + if (DEV_ATTRIB(dev)->enforce_pr_isids) + continue; + } + atomic_inc(&pr_reg->pr_res_holders); + smp_mb__after_atomic_inc(); + spin_unlock(&pr_tmpl->registration_lock); + return pr_reg; + } + /* + * If the *pr_reg contains a fabric defined ISID for multi-value + * SCSI Initiator Port TransportIDs, then we expect a valid + * matching ISID to be provided by the local SCSI Initiator Port. + */ + if (!(isid)) + continue; + if (strcmp(isid, pr_reg->pr_reg_isid)) + continue; + + atomic_inc(&pr_reg->pr_res_holders); + smp_mb__after_atomic_inc(); + spin_unlock(&pr_tmpl->registration_lock); + return pr_reg; + } + spin_unlock(&pr_tmpl->registration_lock); + + return NULL; +} + +static struct t10_pr_registration *core_scsi3_locate_pr_reg( + struct se_device *dev, + struct se_node_acl *nacl, + struct se_session *sess) +{ + struct se_portal_group *tpg = nacl->se_tpg; + unsigned char buf[PR_REG_ISID_LEN], *isid_ptr = NULL; + + if (TPG_TFO(tpg)->sess_get_initiator_sid != NULL) { + memset(&buf[0], 0, PR_REG_ISID_LEN); + TPG_TFO(tpg)->sess_get_initiator_sid(sess, &buf[0], + PR_REG_ISID_LEN); + isid_ptr = &buf[0]; + } + + return __core_scsi3_locate_pr_reg(dev, nacl, isid_ptr); +} + +static void core_scsi3_put_pr_reg(struct t10_pr_registration *pr_reg) +{ + atomic_dec(&pr_reg->pr_res_holders); + smp_mb__after_atomic_dec(); +} + +static int core_scsi3_check_implict_release( + struct se_device *dev, + struct t10_pr_registration *pr_reg) +{ + struct se_node_acl *nacl = pr_reg->pr_reg_nacl; + struct t10_pr_registration *pr_res_holder; + int ret = 0; + + spin_lock(&dev->dev_reservation_lock); + pr_res_holder = dev->dev_pr_res_holder; + if (!(pr_res_holder)) { + spin_unlock(&dev->dev_reservation_lock); + return ret; + } + if (pr_res_holder == pr_reg) { + /* + * Perform an implict RELEASE if the registration that + * is being released is holding the reservation. + * + * From spc4r17, section 5.7.11.1: + * + * e) If the I_T nexus is the persistent reservation holder + * and the persistent reservation is not an all registrants + * type, then a PERSISTENT RESERVE OUT command with REGISTER + * service action or REGISTER AND IGNORE EXISTING KEY + * service action with the SERVICE ACTION RESERVATION KEY + * field set to zero (see 5.7.11.3). + */ + __core_scsi3_complete_pro_release(dev, nacl, pr_reg, 0); + ret = 1; + /* + * For 'All Registrants' reservation types, all existing + * registrations are still processed as reservation holders + * in core_scsi3_pr_seq_non_holder() after the initial + * reservation holder is implictly released here. + */ + } else if (pr_reg->pr_reg_all_tg_pt && + (!strcmp(pr_res_holder->pr_reg_nacl->initiatorname, + pr_reg->pr_reg_nacl->initiatorname)) && + (pr_res_holder->pr_res_key == pr_reg->pr_res_key)) { + printk(KERN_ERR "SPC-3 PR: Unable to perform ALL_TG_PT=1" + " UNREGISTER while existing reservation with matching" + " key 0x%016Lx is present from another SCSI Initiator" + " Port\n", pr_reg->pr_res_key); + ret = -1; + } + spin_unlock(&dev->dev_reservation_lock); + + return ret; +} + +/* + * Called with struct t10_reservation_template->registration_lock held. + */ +static void __core_scsi3_free_registration( + struct se_device *dev, + struct t10_pr_registration *pr_reg, + struct list_head *preempt_and_abort_list, + int dec_holders) +{ + struct target_core_fabric_ops *tfo = + pr_reg->pr_reg_nacl->se_tpg->se_tpg_tfo; + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + char i_buf[PR_REG_ISID_ID_LEN]; + int prf_isid; + + memset(i_buf, 0, PR_REG_ISID_ID_LEN); + prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + + pr_reg->pr_reg_deve->def_pr_registered = 0; + pr_reg->pr_reg_deve->pr_res_key = 0; + list_del(&pr_reg->pr_reg_list); + /* + * Caller accessing *pr_reg using core_scsi3_locate_pr_reg(), + * so call core_scsi3_put_pr_reg() to decrement our reference. + */ + if (dec_holders) + core_scsi3_put_pr_reg(pr_reg); + /* + * Wait until all reference from any other I_T nexuses for this + * *pr_reg have been released. Because list_del() is called above, + * the last core_scsi3_put_pr_reg(pr_reg) will release this reference + * count back to zero, and we release *pr_reg. + */ + while (atomic_read(&pr_reg->pr_res_holders) != 0) { + spin_unlock(&pr_tmpl->registration_lock); + printk("SPC-3 PR [%s] waiting for pr_res_holders\n", + tfo->get_fabric_name()); + cpu_relax(); + spin_lock(&pr_tmpl->registration_lock); + } + + printk(KERN_INFO "SPC-3 PR [%s] Service Action: UNREGISTER Initiator" + " Node: %s%s\n", tfo->get_fabric_name(), + pr_reg->pr_reg_nacl->initiatorname, + (prf_isid) ? &i_buf[0] : ""); + printk(KERN_INFO "SPC-3 PR [%s] for %s TCM Subsystem %s Object Target" + " Port(s)\n", tfo->get_fabric_name(), + (pr_reg->pr_reg_all_tg_pt) ? "ALL" : "SINGLE", + TRANSPORT(dev)->name); + printk(KERN_INFO "SPC-3 PR [%s] SA Res Key: 0x%016Lx PRgeneration:" + " 0x%08x\n", tfo->get_fabric_name(), pr_reg->pr_res_key, + pr_reg->pr_res_generation); + + if (!(preempt_and_abort_list)) { + pr_reg->pr_reg_deve = NULL; + pr_reg->pr_reg_nacl = NULL; + kfree(pr_reg->pr_aptpl_buf); + kmem_cache_free(t10_pr_reg_cache, pr_reg); + return; + } + /* + * For PREEMPT_AND_ABORT, the list of *pr_reg in preempt_and_abort_list + * are released once the ABORT_TASK_SET has completed.. + */ + list_add_tail(&pr_reg->pr_reg_abort_list, preempt_and_abort_list); +} + +void core_scsi3_free_pr_reg_from_nacl( + struct se_device *dev, + struct se_node_acl *nacl) +{ + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_res_holder; + /* + * If the passed se_node_acl matches the reservation holder, + * release the reservation. + */ + spin_lock(&dev->dev_reservation_lock); + pr_res_holder = dev->dev_pr_res_holder; + if ((pr_res_holder != NULL) && + (pr_res_holder->pr_reg_nacl == nacl)) + __core_scsi3_complete_pro_release(dev, nacl, pr_res_holder, 0); + spin_unlock(&dev->dev_reservation_lock); + /* + * Release any registration associated with the struct se_node_acl. + */ + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, + &pr_tmpl->registration_list, pr_reg_list) { + + if (pr_reg->pr_reg_nacl != nacl) + continue; + + __core_scsi3_free_registration(dev, pr_reg, NULL, 0); + } + spin_unlock(&pr_tmpl->registration_lock); +} + +void core_scsi3_free_all_registrations( + struct se_device *dev) +{ + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_res_holder; + + spin_lock(&dev->dev_reservation_lock); + pr_res_holder = dev->dev_pr_res_holder; + if (pr_res_holder != NULL) { + struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl; + __core_scsi3_complete_pro_release(dev, pr_res_nacl, + pr_res_holder, 0); + } + spin_unlock(&dev->dev_reservation_lock); + + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, + &pr_tmpl->registration_list, pr_reg_list) { + + __core_scsi3_free_registration(dev, pr_reg, NULL, 0); + } + spin_unlock(&pr_tmpl->registration_lock); + + spin_lock(&pr_tmpl->aptpl_reg_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->aptpl_reg_list, + pr_reg_aptpl_list) { + list_del(&pr_reg->pr_reg_aptpl_list); + kfree(pr_reg->pr_aptpl_buf); + kmem_cache_free(t10_pr_reg_cache, pr_reg); + } + spin_unlock(&pr_tmpl->aptpl_reg_lock); +} + +static int core_scsi3_tpg_depend_item(struct se_portal_group *tpg) +{ + return configfs_depend_item(TPG_TFO(tpg)->tf_subsys, + &tpg->tpg_group.cg_item); +} + +static void core_scsi3_tpg_undepend_item(struct se_portal_group *tpg) +{ + configfs_undepend_item(TPG_TFO(tpg)->tf_subsys, + &tpg->tpg_group.cg_item); + + atomic_dec(&tpg->tpg_pr_ref_count); + smp_mb__after_atomic_dec(); +} + +static int core_scsi3_nodeacl_depend_item(struct se_node_acl *nacl) +{ + struct se_portal_group *tpg = nacl->se_tpg; + + if (nacl->dynamic_node_acl) + return 0; + + return configfs_depend_item(TPG_TFO(tpg)->tf_subsys, + &nacl->acl_group.cg_item); +} + +static void core_scsi3_nodeacl_undepend_item(struct se_node_acl *nacl) +{ + struct se_portal_group *tpg = nacl->se_tpg; + + if (nacl->dynamic_node_acl) { + atomic_dec(&nacl->acl_pr_ref_count); + smp_mb__after_atomic_dec(); + return; + } + + configfs_undepend_item(TPG_TFO(tpg)->tf_subsys, + &nacl->acl_group.cg_item); + + atomic_dec(&nacl->acl_pr_ref_count); + smp_mb__after_atomic_dec(); +} + +static int core_scsi3_lunacl_depend_item(struct se_dev_entry *se_deve) +{ + struct se_lun_acl *lun_acl = se_deve->se_lun_acl; + struct se_node_acl *nacl; + struct se_portal_group *tpg; + /* + * For nacl->dynamic_node_acl=1 + */ + if (!(lun_acl)) + return 0; + + nacl = lun_acl->se_lun_nacl; + tpg = nacl->se_tpg; + + return configfs_depend_item(TPG_TFO(tpg)->tf_subsys, + &lun_acl->se_lun_group.cg_item); +} + +static void core_scsi3_lunacl_undepend_item(struct se_dev_entry *se_deve) +{ + struct se_lun_acl *lun_acl = se_deve->se_lun_acl; + struct se_node_acl *nacl; + struct se_portal_group *tpg; + /* + * For nacl->dynamic_node_acl=1 + */ + if (!(lun_acl)) { + atomic_dec(&se_deve->pr_ref_count); + smp_mb__after_atomic_dec(); + return; + } + nacl = lun_acl->se_lun_nacl; + tpg = nacl->se_tpg; + + configfs_undepend_item(TPG_TFO(tpg)->tf_subsys, + &lun_acl->se_lun_group.cg_item); + + atomic_dec(&se_deve->pr_ref_count); + smp_mb__after_atomic_dec(); +} + +static int core_scsi3_decode_spec_i_port( + struct se_cmd *cmd, + struct se_portal_group *tpg, + unsigned char *l_isid, + u64 sa_res_key, + int all_tg_pt, + int aptpl) +{ + struct se_device *dev = SE_DEV(cmd); + struct se_port *tmp_port; + struct se_portal_group *dest_tpg = NULL, *tmp_tpg; + struct se_session *se_sess = SE_SESS(cmd); + struct se_node_acl *dest_node_acl = NULL; + struct se_dev_entry *dest_se_deve = NULL, *local_se_deve; + struct t10_pr_registration *dest_pr_reg, *local_pr_reg, *pr_reg_e; + struct t10_pr_registration *pr_reg_tmp, *pr_reg_tmp_safe; + struct list_head tid_dest_list; + struct pr_transport_id_holder *tidh_new, *tidh, *tidh_tmp; + struct target_core_fabric_ops *tmp_tf_ops; + unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; + unsigned char *ptr, *i_str = NULL, proto_ident, tmp_proto_ident; + char *iport_ptr = NULL, dest_iport[64], i_buf[PR_REG_ISID_ID_LEN]; + u32 tpdl, tid_len = 0; + int ret, dest_local_nexus, prf_isid; + u32 dest_rtpi = 0; + + memset(dest_iport, 0, 64); + INIT_LIST_HEAD(&tid_dest_list); + + local_se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; + /* + * Allocate a struct pr_transport_id_holder and setup the + * local_node_acl and local_se_deve pointers and add to + * struct list_head tid_dest_list for add registration + * processing in the loop of tid_dest_list below. + */ + tidh_new = kzalloc(sizeof(struct pr_transport_id_holder), GFP_KERNEL); + if (!(tidh_new)) { + printk(KERN_ERR "Unable to allocate tidh_new\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + INIT_LIST_HEAD(&tidh_new->dest_list); + tidh_new->dest_tpg = tpg; + tidh_new->dest_node_acl = se_sess->se_node_acl; + tidh_new->dest_se_deve = local_se_deve; + + local_pr_reg = __core_scsi3_alloc_registration(SE_DEV(cmd), + se_sess->se_node_acl, local_se_deve, l_isid, + sa_res_key, all_tg_pt, aptpl); + if (!(local_pr_reg)) { + kfree(tidh_new); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + tidh_new->dest_pr_reg = local_pr_reg; + /* + * The local I_T nexus does not hold any configfs dependances, + * so we set tid_h->dest_local_nexus=1 to prevent the + * configfs_undepend_item() calls in the tid_dest_list loops below. + */ + tidh_new->dest_local_nexus = 1; + list_add_tail(&tidh_new->dest_list, &tid_dest_list); + /* + * For a PERSISTENT RESERVE OUT specify initiator ports payload, + * first extract TransportID Parameter Data Length, and make sure + * the value matches up to the SCSI expected data transfer length. + */ + tpdl = (buf[24] & 0xff) << 24; + tpdl |= (buf[25] & 0xff) << 16; + tpdl |= (buf[26] & 0xff) << 8; + tpdl |= buf[27] & 0xff; + + if ((tpdl + 28) != cmd->data_length) { + printk(KERN_ERR "SPC-3 PR: Illegal tpdl: %u + 28 byte header" + " does not equal CDB data_length: %u\n", tpdl, + cmd->data_length); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + /* + * Start processing the received transport IDs using the + * receiving I_T Nexus portal's fabric dependent methods to + * obtain the SCSI Initiator Port/Device Identifiers. + */ + ptr = &buf[28]; + + while (tpdl > 0) { + proto_ident = (ptr[0] & 0x0f); + dest_tpg = NULL; + + spin_lock(&dev->se_port_lock); + list_for_each_entry(tmp_port, &dev->dev_sep_list, sep_list) { + tmp_tpg = tmp_port->sep_tpg; + if (!(tmp_tpg)) + continue; + tmp_tf_ops = TPG_TFO(tmp_tpg); + if (!(tmp_tf_ops)) + continue; + if (!(tmp_tf_ops->get_fabric_proto_ident) || + !(tmp_tf_ops->tpg_parse_pr_out_transport_id)) + continue; + /* + * Look for the matching proto_ident provided by + * the received TransportID + */ + tmp_proto_ident = tmp_tf_ops->get_fabric_proto_ident(tmp_tpg); + if (tmp_proto_ident != proto_ident) + continue; + dest_rtpi = tmp_port->sep_rtpi; + + i_str = tmp_tf_ops->tpg_parse_pr_out_transport_id( + tmp_tpg, (const char *)ptr, &tid_len, + &iport_ptr); + if (!(i_str)) + continue; + + atomic_inc(&tmp_tpg->tpg_pr_ref_count); + smp_mb__after_atomic_inc(); + spin_unlock(&dev->se_port_lock); + + ret = core_scsi3_tpg_depend_item(tmp_tpg); + if (ret != 0) { + printk(KERN_ERR " core_scsi3_tpg_depend_item()" + " for tmp_tpg\n"); + atomic_dec(&tmp_tpg->tpg_pr_ref_count); + smp_mb__after_atomic_dec(); + ret = PYX_TRANSPORT_LU_COMM_FAILURE; + goto out; + } + /* + * Locate the desination initiator ACL to be registered + * from the decoded fabric module specific TransportID + * at *i_str. + */ + spin_lock_bh(&tmp_tpg->acl_node_lock); + dest_node_acl = __core_tpg_get_initiator_node_acl( + tmp_tpg, i_str); + if (dest_node_acl) { + atomic_inc(&dest_node_acl->acl_pr_ref_count); + smp_mb__after_atomic_inc(); + } + spin_unlock_bh(&tmp_tpg->acl_node_lock); + + if (!(dest_node_acl)) { + core_scsi3_tpg_undepend_item(tmp_tpg); + spin_lock(&dev->se_port_lock); + continue; + } + + ret = core_scsi3_nodeacl_depend_item(dest_node_acl); + if (ret != 0) { + printk(KERN_ERR "configfs_depend_item() failed" + " for dest_node_acl->acl_group\n"); + atomic_dec(&dest_node_acl->acl_pr_ref_count); + smp_mb__after_atomic_dec(); + core_scsi3_tpg_undepend_item(tmp_tpg); + ret = PYX_TRANSPORT_LU_COMM_FAILURE; + goto out; + } + + dest_tpg = tmp_tpg; + printk(KERN_INFO "SPC-3 PR SPEC_I_PT: Located %s Node:" + " %s Port RTPI: %hu\n", + TPG_TFO(dest_tpg)->get_fabric_name(), + dest_node_acl->initiatorname, dest_rtpi); + + spin_lock(&dev->se_port_lock); + break; + } + spin_unlock(&dev->se_port_lock); + + if (!(dest_tpg)) { + printk(KERN_ERR "SPC-3 PR SPEC_I_PT: Unable to locate" + " dest_tpg\n"); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } +#if 0 + printk("SPC-3 PR SPEC_I_PT: Got %s data_length: %u tpdl: %u" + " tid_len: %d for %s + %s\n", + TPG_TFO(dest_tpg)->get_fabric_name(), cmd->data_length, + tpdl, tid_len, i_str, iport_ptr); +#endif + if (tid_len > tpdl) { + printk(KERN_ERR "SPC-3 PR SPEC_I_PT: Illegal tid_len:" + " %u for Transport ID: %s\n", tid_len, ptr); + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_tpg); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + /* + * Locate the desintation struct se_dev_entry pointer for matching + * RELATIVE TARGET PORT IDENTIFIER on the receiving I_T Nexus + * Target Port. + */ + dest_se_deve = core_get_se_deve_from_rtpi(dest_node_acl, + dest_rtpi); + if (!(dest_se_deve)) { + printk(KERN_ERR "Unable to locate %s dest_se_deve" + " from destination RTPI: %hu\n", + TPG_TFO(dest_tpg)->get_fabric_name(), + dest_rtpi); + + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_tpg); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + + ret = core_scsi3_lunacl_depend_item(dest_se_deve); + if (ret < 0) { + printk(KERN_ERR "core_scsi3_lunacl_depend_item()" + " failed\n"); + atomic_dec(&dest_se_deve->pr_ref_count); + smp_mb__after_atomic_dec(); + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_tpg); + ret = PYX_TRANSPORT_LU_COMM_FAILURE; + goto out; + } +#if 0 + printk(KERN_INFO "SPC-3 PR SPEC_I_PT: Located %s Node: %s" + " dest_se_deve mapped_lun: %u\n", + TPG_TFO(dest_tpg)->get_fabric_name(), + dest_node_acl->initiatorname, dest_se_deve->mapped_lun); +#endif + /* + * Skip any TransportIDs that already have a registration for + * this target port. + */ + pr_reg_e = __core_scsi3_locate_pr_reg(dev, dest_node_acl, + iport_ptr); + if (pr_reg_e) { + core_scsi3_put_pr_reg(pr_reg_e); + core_scsi3_lunacl_undepend_item(dest_se_deve); + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_tpg); + ptr += tid_len; + tpdl -= tid_len; + tid_len = 0; + continue; + } + /* + * Allocate a struct pr_transport_id_holder and setup + * the dest_node_acl and dest_se_deve pointers for the + * loop below. + */ + tidh_new = kzalloc(sizeof(struct pr_transport_id_holder), + GFP_KERNEL); + if (!(tidh_new)) { + printk(KERN_ERR "Unable to allocate tidh_new\n"); + core_scsi3_lunacl_undepend_item(dest_se_deve); + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_tpg); + ret = PYX_TRANSPORT_LU_COMM_FAILURE; + goto out; + } + INIT_LIST_HEAD(&tidh_new->dest_list); + tidh_new->dest_tpg = dest_tpg; + tidh_new->dest_node_acl = dest_node_acl; + tidh_new->dest_se_deve = dest_se_deve; + + /* + * Allocate, but do NOT add the registration for the + * TransportID referenced SCSI Initiator port. This + * done because of the following from spc4r17 in section + * 6.14.3 wrt SPEC_I_PT: + * + * "If a registration fails for any initiator port (e.g., if th + * logical unit does not have enough resources available to + * hold the registration information), no registrations shall be + * made, and the command shall be terminated with + * CHECK CONDITION status." + * + * That means we call __core_scsi3_alloc_registration() here, + * and then call __core_scsi3_add_registration() in the + * 2nd loop which will never fail. + */ + dest_pr_reg = __core_scsi3_alloc_registration(SE_DEV(cmd), + dest_node_acl, dest_se_deve, iport_ptr, + sa_res_key, all_tg_pt, aptpl); + if (!(dest_pr_reg)) { + core_scsi3_lunacl_undepend_item(dest_se_deve); + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_tpg); + kfree(tidh_new); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + tidh_new->dest_pr_reg = dest_pr_reg; + list_add_tail(&tidh_new->dest_list, &tid_dest_list); + + ptr += tid_len; + tpdl -= tid_len; + tid_len = 0; + + } + /* + * Go ahead and create a registrations from tid_dest_list for the + * SPEC_I_PT provided TransportID for the *tidh referenced dest_node_acl + * and dest_se_deve. + * + * The SA Reservation Key from the PROUT is set for the + * registration, and ALL_TG_PT is also passed. ALL_TG_PT=1 + * means that the TransportID Initiator port will be + * registered on all of the target ports in the SCSI target device + * ALL_TG_PT=0 means the registration will only be for the + * SCSI target port the PROUT REGISTER with SPEC_I_PT=1 + * was received. + */ + list_for_each_entry_safe(tidh, tidh_tmp, &tid_dest_list, dest_list) { + dest_tpg = tidh->dest_tpg; + dest_node_acl = tidh->dest_node_acl; + dest_se_deve = tidh->dest_se_deve; + dest_pr_reg = tidh->dest_pr_reg; + dest_local_nexus = tidh->dest_local_nexus; + + list_del(&tidh->dest_list); + kfree(tidh); + + memset(i_buf, 0, PR_REG_ISID_ID_LEN); + prf_isid = core_pr_dump_initiator_port(dest_pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + + __core_scsi3_add_registration(SE_DEV(cmd), dest_node_acl, + dest_pr_reg, 0, 0); + + printk(KERN_INFO "SPC-3 PR [%s] SPEC_I_PT: Successfully" + " registered Transport ID for Node: %s%s Mapped LUN:" + " %u\n", TPG_TFO(dest_tpg)->get_fabric_name(), + dest_node_acl->initiatorname, (prf_isid) ? + &i_buf[0] : "", dest_se_deve->mapped_lun); + + if (dest_local_nexus) + continue; + + core_scsi3_lunacl_undepend_item(dest_se_deve); + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_tpg); + } + + return 0; +out: + /* + * For the failure case, release everything from tid_dest_list + * including *dest_pr_reg and the configfs dependances.. + */ + list_for_each_entry_safe(tidh, tidh_tmp, &tid_dest_list, dest_list) { + dest_tpg = tidh->dest_tpg; + dest_node_acl = tidh->dest_node_acl; + dest_se_deve = tidh->dest_se_deve; + dest_pr_reg = tidh->dest_pr_reg; + dest_local_nexus = tidh->dest_local_nexus; + + list_del(&tidh->dest_list); + kfree(tidh); + /* + * Release any extra ALL_TG_PT=1 registrations for + * the SPEC_I_PT=1 case. + */ + list_for_each_entry_safe(pr_reg_tmp, pr_reg_tmp_safe, + &dest_pr_reg->pr_reg_atp_list, + pr_reg_atp_mem_list) { + list_del(&pr_reg_tmp->pr_reg_atp_mem_list); + core_scsi3_lunacl_undepend_item(pr_reg_tmp->pr_reg_deve); + kmem_cache_free(t10_pr_reg_cache, pr_reg_tmp); + } + + kfree(dest_pr_reg->pr_aptpl_buf); + kmem_cache_free(t10_pr_reg_cache, dest_pr_reg); + + if (dest_local_nexus) + continue; + + core_scsi3_lunacl_undepend_item(dest_se_deve); + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_tpg); + } + return ret; +} + +/* + * Called with struct se_device->dev_reservation_lock held + */ +static int __core_scsi3_update_aptpl_buf( + struct se_device *dev, + unsigned char *buf, + u32 pr_aptpl_buf_len, + int clear_aptpl_metadata) +{ + struct se_lun *lun; + struct se_portal_group *tpg; + struct se_subsystem_dev *su_dev = SU_DEV(dev); + struct t10_pr_registration *pr_reg; + unsigned char tmp[512], isid_buf[32]; + ssize_t len = 0; + int reg_count = 0; + + memset(buf, 0, pr_aptpl_buf_len); + /* + * Called to clear metadata once APTPL has been deactivated. + */ + if (clear_aptpl_metadata) { + snprintf(buf, pr_aptpl_buf_len, + "No Registrations or Reservations\n"); + return 0; + } + /* + * Walk the registration list.. + */ + spin_lock(&T10_RES(su_dev)->registration_lock); + list_for_each_entry(pr_reg, &T10_RES(su_dev)->registration_list, + pr_reg_list) { + + tmp[0] = '\0'; + isid_buf[0] = '\0'; + tpg = pr_reg->pr_reg_nacl->se_tpg; + lun = pr_reg->pr_reg_tg_pt_lun; + /* + * Write out any ISID value to APTPL metadata that was included + * in the original registration. + */ + if (pr_reg->isid_present_at_reg) + snprintf(isid_buf, 32, "initiator_sid=%s\n", + pr_reg->pr_reg_isid); + /* + * Include special metadata if the pr_reg matches the + * reservation holder. + */ + if (dev->dev_pr_res_holder == pr_reg) { + snprintf(tmp, 512, "PR_REG_START: %d" + "\ninitiator_fabric=%s\n" + "initiator_node=%s\n%s" + "sa_res_key=%llu\n" + "res_holder=1\nres_type=%02x\n" + "res_scope=%02x\nres_all_tg_pt=%d\n" + "mapped_lun=%u\n", reg_count, + TPG_TFO(tpg)->get_fabric_name(), + pr_reg->pr_reg_nacl->initiatorname, isid_buf, + pr_reg->pr_res_key, pr_reg->pr_res_type, + pr_reg->pr_res_scope, pr_reg->pr_reg_all_tg_pt, + pr_reg->pr_res_mapped_lun); + } else { + snprintf(tmp, 512, "PR_REG_START: %d\n" + "initiator_fabric=%s\ninitiator_node=%s\n%s" + "sa_res_key=%llu\nres_holder=0\n" + "res_all_tg_pt=%d\nmapped_lun=%u\n", + reg_count, TPG_TFO(tpg)->get_fabric_name(), + pr_reg->pr_reg_nacl->initiatorname, isid_buf, + pr_reg->pr_res_key, pr_reg->pr_reg_all_tg_pt, + pr_reg->pr_res_mapped_lun); + } + + if ((len + strlen(tmp) > pr_aptpl_buf_len)) { + printk(KERN_ERR "Unable to update renaming" + " APTPL metadata\n"); + spin_unlock(&T10_RES(su_dev)->registration_lock); + return -1; + } + len += sprintf(buf+len, "%s", tmp); + + /* + * Include information about the associated SCSI target port. + */ + snprintf(tmp, 512, "target_fabric=%s\ntarget_node=%s\n" + "tpgt=%hu\nport_rtpi=%hu\ntarget_lun=%u\nPR_REG_END:" + " %d\n", TPG_TFO(tpg)->get_fabric_name(), + TPG_TFO(tpg)->tpg_get_wwn(tpg), + TPG_TFO(tpg)->tpg_get_tag(tpg), + lun->lun_sep->sep_rtpi, lun->unpacked_lun, reg_count); + + if ((len + strlen(tmp) > pr_aptpl_buf_len)) { + printk(KERN_ERR "Unable to update renaming" + " APTPL metadata\n"); + spin_unlock(&T10_RES(su_dev)->registration_lock); + return -1; + } + len += sprintf(buf+len, "%s", tmp); + reg_count++; + } + spin_unlock(&T10_RES(su_dev)->registration_lock); + + if (!(reg_count)) + len += sprintf(buf+len, "No Registrations or Reservations"); + + return 0; +} + +static int core_scsi3_update_aptpl_buf( + struct se_device *dev, + unsigned char *buf, + u32 pr_aptpl_buf_len, + int clear_aptpl_metadata) +{ + int ret; + + spin_lock(&dev->dev_reservation_lock); + ret = __core_scsi3_update_aptpl_buf(dev, buf, pr_aptpl_buf_len, + clear_aptpl_metadata); + spin_unlock(&dev->dev_reservation_lock); + + return ret; +} + +/* + * Called with struct se_device->aptpl_file_mutex held + */ +static int __core_scsi3_write_aptpl_to_file( + struct se_device *dev, + unsigned char *buf, + u32 pr_aptpl_buf_len) +{ + struct t10_wwn *wwn = &SU_DEV(dev)->t10_wwn; + struct file *file; + struct iovec iov[1]; + mm_segment_t old_fs; + int flags = O_RDWR | O_CREAT | O_TRUNC; + char path[512]; + int ret; + + memset(iov, 0, sizeof(struct iovec)); + memset(path, 0, 512); + + if (strlen(&wwn->unit_serial[0]) > 512) { + printk(KERN_ERR "WWN value for struct se_device does not fit" + " into path buffer\n"); + return -1; + } + + snprintf(path, 512, "/var/target/pr/aptpl_%s", &wwn->unit_serial[0]); + file = filp_open(path, flags, 0600); + if (IS_ERR(file) || !file || !file->f_dentry) { + printk(KERN_ERR "filp_open(%s) for APTPL metadata" + " failed\n", path); + return -1; + } + + iov[0].iov_base = &buf[0]; + if (!(pr_aptpl_buf_len)) + iov[0].iov_len = (strlen(&buf[0]) + 1); /* Add extra for NULL */ + else + iov[0].iov_len = pr_aptpl_buf_len; + + old_fs = get_fs(); + set_fs(get_ds()); + ret = vfs_writev(file, &iov[0], 1, &file->f_pos); + set_fs(old_fs); + + if (ret < 0) { + printk("Error writing APTPL metadata file: %s\n", path); + filp_close(file, NULL); + return -1; + } + filp_close(file, NULL); + + return 0; +} + +static int core_scsi3_update_and_write_aptpl( + struct se_device *dev, + unsigned char *in_buf, + u32 in_pr_aptpl_buf_len) +{ + unsigned char null_buf[64], *buf; + u32 pr_aptpl_buf_len; + int ret, clear_aptpl_metadata = 0; + /* + * Can be called with a NULL pointer from PROUT service action CLEAR + */ + if (!(in_buf)) { + memset(null_buf, 0, 64); + buf = &null_buf[0]; + /* + * This will clear the APTPL metadata to: + * "No Registrations or Reservations" status + */ + pr_aptpl_buf_len = 64; + clear_aptpl_metadata = 1; + } else { + buf = in_buf; + pr_aptpl_buf_len = in_pr_aptpl_buf_len; + } + + ret = core_scsi3_update_aptpl_buf(dev, buf, pr_aptpl_buf_len, + clear_aptpl_metadata); + if (ret != 0) + return -1; + /* + * __core_scsi3_write_aptpl_to_file() will call strlen() + * on the passed buf to determine pr_aptpl_buf_len. + */ + ret = __core_scsi3_write_aptpl_to_file(dev, buf, 0); + if (ret != 0) + return -1; + + return ret; +} + +static int core_scsi3_emulate_pro_register( + struct se_cmd *cmd, + u64 res_key, + u64 sa_res_key, + int aptpl, + int all_tg_pt, + int spec_i_pt, + int ignore_key) +{ + struct se_session *se_sess = SE_SESS(cmd); + struct se_device *dev = SE_DEV(cmd); + struct se_dev_entry *se_deve; + struct se_lun *se_lun = SE_LUN(cmd); + struct se_portal_group *se_tpg; + struct t10_pr_registration *pr_reg, *pr_reg_p, *pr_reg_tmp, *pr_reg_e; + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + /* Used for APTPL metadata w/ UNREGISTER */ + unsigned char *pr_aptpl_buf = NULL; + unsigned char isid_buf[PR_REG_ISID_LEN], *isid_ptr = NULL; + int pr_holder = 0, ret = 0, type; + + if (!(se_sess) || !(se_lun)) { + printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + se_tpg = se_sess->se_tpg; + se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; + + if (TPG_TFO(se_tpg)->sess_get_initiator_sid != NULL) { + memset(&isid_buf[0], 0, PR_REG_ISID_LEN); + TPG_TFO(se_tpg)->sess_get_initiator_sid(se_sess, &isid_buf[0], + PR_REG_ISID_LEN); + isid_ptr = &isid_buf[0]; + } + /* + * Follow logic from spc4r17 Section 5.7.7, Register Behaviors Table 47 + */ + pr_reg_e = core_scsi3_locate_pr_reg(dev, se_sess->se_node_acl, se_sess); + if (!(pr_reg_e)) { + if (res_key) { + printk(KERN_WARNING "SPC-3 PR: Reservation Key non-zero" + " for SA REGISTER, returning CONFLICT\n"); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * Do nothing but return GOOD status. + */ + if (!(sa_res_key)) + return PYX_TRANSPORT_SENT_TO_TRANSPORT; + + if (!(spec_i_pt)) { + /* + * Perform the Service Action REGISTER on the Initiator + * Port Endpoint that the PRO was received from on the + * Logical Unit of the SCSI device server. + */ + ret = core_scsi3_alloc_registration(SE_DEV(cmd), + se_sess->se_node_acl, se_deve, isid_ptr, + sa_res_key, all_tg_pt, aptpl, + ignore_key, 0); + if (ret != 0) { + printk(KERN_ERR "Unable to allocate" + " struct t10_pr_registration\n"); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + } else { + /* + * Register both the Initiator port that received + * PROUT SA REGISTER + SPEC_I_PT=1 and extract SCSI + * TransportID from Parameter list and loop through + * fabric dependent parameter list while calling + * logic from of core_scsi3_alloc_registration() for + * each TransportID provided SCSI Initiator Port/Device + */ + ret = core_scsi3_decode_spec_i_port(cmd, se_tpg, + isid_ptr, sa_res_key, all_tg_pt, aptpl); + if (ret != 0) + return ret; + } + /* + * Nothing left to do for the APTPL=0 case. + */ + if (!(aptpl)) { + pr_tmpl->pr_aptpl_active = 0; + core_scsi3_update_and_write_aptpl(SE_DEV(cmd), NULL, 0); + printk("SPC-3 PR: Set APTPL Bit Deactivated for" + " REGISTER\n"); + return 0; + } + /* + * Locate the newly allocated local I_T Nexus *pr_reg, and + * update the APTPL metadata information using its + * preallocated *pr_reg->pr_aptpl_buf. + */ + pr_reg = core_scsi3_locate_pr_reg(SE_DEV(cmd), + se_sess->se_node_acl, se_sess); + + ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), + &pr_reg->pr_aptpl_buf[0], + pr_tmpl->pr_aptpl_buf_len); + if (!(ret)) { + pr_tmpl->pr_aptpl_active = 1; + printk("SPC-3 PR: Set APTPL Bit Activated for REGISTER\n"); + } + + core_scsi3_put_pr_reg(pr_reg); + return ret; + } else { + /* + * Locate the existing *pr_reg via struct se_node_acl pointers + */ + pr_reg = pr_reg_e; + type = pr_reg->pr_res_type; + + if (!(ignore_key)) { + if (res_key != pr_reg->pr_res_key) { + printk(KERN_ERR "SPC-3 PR REGISTER: Received" + " res_key: 0x%016Lx does not match" + " existing SA REGISTER res_key:" + " 0x%016Lx\n", res_key, + pr_reg->pr_res_key); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + } + if (spec_i_pt) { + printk(KERN_ERR "SPC-3 PR UNREGISTER: SPEC_I_PT" + " set while sa_res_key=0\n"); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + /* + * An existing ALL_TG_PT=1 registration being released + * must also set ALL_TG_PT=1 in the incoming PROUT. + */ + if (pr_reg->pr_reg_all_tg_pt && !(all_tg_pt)) { + printk(KERN_ERR "SPC-3 PR UNREGISTER: ALL_TG_PT=1" + " registration exists, but ALL_TG_PT=1 bit not" + " present in received PROUT\n"); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + /* + * Allocate APTPL metadata buffer used for UNREGISTER ops + */ + if (aptpl) { + pr_aptpl_buf = kzalloc(pr_tmpl->pr_aptpl_buf_len, + GFP_KERNEL); + if (!(pr_aptpl_buf)) { + printk(KERN_ERR "Unable to allocate" + " pr_aptpl_buf\n"); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + } + /* + * sa_res_key=0 Unregister Reservation Key for registered I_T + * Nexus sa_res_key=1 Change Reservation Key for registered I_T + * Nexus. + */ + if (!(sa_res_key)) { + pr_holder = core_scsi3_check_implict_release( + SE_DEV(cmd), pr_reg); + if (pr_holder < 0) { + kfree(pr_aptpl_buf); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + + spin_lock(&pr_tmpl->registration_lock); + /* + * Release all ALL_TG_PT=1 for the matching SCSI Initiator Port + * and matching pr_res_key. + */ + if (pr_reg->pr_reg_all_tg_pt) { + list_for_each_entry_safe(pr_reg_p, pr_reg_tmp, + &pr_tmpl->registration_list, + pr_reg_list) { + + if (!(pr_reg_p->pr_reg_all_tg_pt)) + continue; + + if (pr_reg_p->pr_res_key != res_key) + continue; + + if (pr_reg == pr_reg_p) + continue; + + if (strcmp(pr_reg->pr_reg_nacl->initiatorname, + pr_reg_p->pr_reg_nacl->initiatorname)) + continue; + + __core_scsi3_free_registration(dev, + pr_reg_p, NULL, 0); + } + } + /* + * Release the calling I_T Nexus registration now.. + */ + __core_scsi3_free_registration(SE_DEV(cmd), pr_reg, + NULL, 1); + /* + * From spc4r17, section 5.7.11.3 Unregistering + * + * If the persistent reservation is a registrants only + * type, the device server shall establish a unit + * attention condition for the initiator port associated + * with every registered I_T nexus except for the I_T + * nexus on which the PERSISTENT RESERVE OUT command was + * received, with the additional sense code set to + * RESERVATIONS RELEASED. + */ + if (pr_holder && + ((type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY) || + (type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY))) { + list_for_each_entry(pr_reg_p, + &pr_tmpl->registration_list, + pr_reg_list) { + + core_scsi3_ua_allocate( + pr_reg_p->pr_reg_nacl, + pr_reg_p->pr_res_mapped_lun, + 0x2A, + ASCQ_2AH_RESERVATIONS_RELEASED); + } + } + spin_unlock(&pr_tmpl->registration_lock); + + if (!(aptpl)) { + pr_tmpl->pr_aptpl_active = 0; + core_scsi3_update_and_write_aptpl(dev, NULL, 0); + printk("SPC-3 PR: Set APTPL Bit Deactivated" + " for UNREGISTER\n"); + return 0; + } + + ret = core_scsi3_update_and_write_aptpl(dev, + &pr_aptpl_buf[0], + pr_tmpl->pr_aptpl_buf_len); + if (!(ret)) { + pr_tmpl->pr_aptpl_active = 1; + printk("SPC-3 PR: Set APTPL Bit Activated" + " for UNREGISTER\n"); + } + + kfree(pr_aptpl_buf); + return ret; + } else { + /* + * Increment PRgeneration counter for struct se_device" + * upon a successful REGISTER, see spc4r17 section 6.3.2 + * READ_KEYS service action. + */ + pr_reg->pr_res_generation = core_scsi3_pr_generation( + SE_DEV(cmd)); + pr_reg->pr_res_key = sa_res_key; + printk("SPC-3 PR [%s] REGISTER%s: Changed Reservation" + " Key for %s to: 0x%016Lx PRgeneration:" + " 0x%08x\n", CMD_TFO(cmd)->get_fabric_name(), + (ignore_key) ? "_AND_IGNORE_EXISTING_KEY" : "", + pr_reg->pr_reg_nacl->initiatorname, + pr_reg->pr_res_key, pr_reg->pr_res_generation); + + if (!(aptpl)) { + pr_tmpl->pr_aptpl_active = 0; + core_scsi3_update_and_write_aptpl(dev, NULL, 0); + core_scsi3_put_pr_reg(pr_reg); + printk("SPC-3 PR: Set APTPL Bit Deactivated" + " for REGISTER\n"); + return 0; + } + + ret = core_scsi3_update_and_write_aptpl(dev, + &pr_aptpl_buf[0], + pr_tmpl->pr_aptpl_buf_len); + if (!(ret)) { + pr_tmpl->pr_aptpl_active = 1; + printk("SPC-3 PR: Set APTPL Bit Activated" + " for REGISTER\n"); + } + + kfree(pr_aptpl_buf); + core_scsi3_put_pr_reg(pr_reg); + } + } + return 0; +} + +unsigned char *core_scsi3_pr_dump_type(int type) +{ + switch (type) { + case PR_TYPE_WRITE_EXCLUSIVE: + return "Write Exclusive Access"; + case PR_TYPE_EXCLUSIVE_ACCESS: + return "Exclusive Access"; + case PR_TYPE_WRITE_EXCLUSIVE_REGONLY: + return "Write Exclusive Access, Registrants Only"; + case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY: + return "Exclusive Access, Registrants Only"; + case PR_TYPE_WRITE_EXCLUSIVE_ALLREG: + return "Write Exclusive Access, All Registrants"; + case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG: + return "Exclusive Access, All Registrants"; + default: + break; + } + + return "Unknown SPC-3 PR Type"; +} + +static int core_scsi3_pro_reserve( + struct se_cmd *cmd, + struct se_device *dev, + int type, + int scope, + u64 res_key) +{ + struct se_session *se_sess = SE_SESS(cmd); + struct se_dev_entry *se_deve; + struct se_lun *se_lun = SE_LUN(cmd); + struct se_portal_group *se_tpg; + struct t10_pr_registration *pr_reg, *pr_res_holder; + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + char i_buf[PR_REG_ISID_ID_LEN]; + int ret, prf_isid; + + memset(i_buf, 0, PR_REG_ISID_ID_LEN); + + if (!(se_sess) || !(se_lun)) { + printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + se_tpg = se_sess->se_tpg; + se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; + /* + * Locate the existing *pr_reg via struct se_node_acl pointers + */ + pr_reg = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl, + se_sess); + if (!(pr_reg)) { + printk(KERN_ERR "SPC-3 PR: Unable to locate" + " PR_REGISTERED *pr_reg for RESERVE\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + /* + * From spc4r17 Section 5.7.9: Reserving: + * + * An application client creates a persistent reservation by issuing + * a PERSISTENT RESERVE OUT command with RESERVE service action through + * a registered I_T nexus with the following parameters: + * a) RESERVATION KEY set to the value of the reservation key that is + * registered with the logical unit for the I_T nexus; and + */ + if (res_key != pr_reg->pr_res_key) { + printk(KERN_ERR "SPC-3 PR RESERVE: Received res_key: 0x%016Lx" + " does not match existing SA REGISTER res_key:" + " 0x%016Lx\n", res_key, pr_reg->pr_res_key); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * From spc4r17 Section 5.7.9: Reserving: + * + * From above: + * b) TYPE field and SCOPE field set to the persistent reservation + * being created. + * + * Only one persistent reservation is allowed at a time per logical unit + * and that persistent reservation has a scope of LU_SCOPE. + */ + if (scope != PR_SCOPE_LU_SCOPE) { + printk(KERN_ERR "SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + /* + * See if we have an existing PR reservation holder pointer at + * struct se_device->dev_pr_res_holder in the form struct t10_pr_registration + * *pr_res_holder. + */ + spin_lock(&dev->dev_reservation_lock); + pr_res_holder = dev->dev_pr_res_holder; + if ((pr_res_holder)) { + /* + * From spc4r17 Section 5.7.9: Reserving: + * + * If the device server receives a PERSISTENT RESERVE OUT + * command from an I_T nexus other than a persistent reservation + * holder (see 5.7.10) that attempts to create a persistent + * reservation when a persistent reservation already exists for + * the logical unit, then the command shall be completed with + * RESERVATION CONFLICT status. + */ + if (pr_res_holder != pr_reg) { + struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl; + printk(KERN_ERR "SPC-3 PR: Attempted RESERVE from" + " [%s]: %s while reservation already held by" + " [%s]: %s, returning RESERVATION_CONFLICT\n", + CMD_TFO(cmd)->get_fabric_name(), + se_sess->se_node_acl->initiatorname, + TPG_TFO(pr_res_nacl->se_tpg)->get_fabric_name(), + pr_res_holder->pr_reg_nacl->initiatorname); + + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * From spc4r17 Section 5.7.9: Reserving: + * + * If a persistent reservation holder attempts to modify the + * type or scope of an existing persistent reservation, the + * command shall be completed with RESERVATION CONFLICT status. + */ + if ((pr_res_holder->pr_res_type != type) || + (pr_res_holder->pr_res_scope != scope)) { + struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl; + printk(KERN_ERR "SPC-3 PR: Attempted RESERVE from" + " [%s]: %s trying to change TYPE and/or SCOPE," + " while reservation already held by [%s]: %s," + " returning RESERVATION_CONFLICT\n", + CMD_TFO(cmd)->get_fabric_name(), + se_sess->se_node_acl->initiatorname, + TPG_TFO(pr_res_nacl->se_tpg)->get_fabric_name(), + pr_res_holder->pr_reg_nacl->initiatorname); + + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * From spc4r17 Section 5.7.9: Reserving: + * + * If the device server receives a PERSISTENT RESERVE OUT + * command with RESERVE service action where the TYPE field and + * the SCOPE field contain the same values as the existing type + * and scope from a persistent reservation holder, it shall not + * make any change to the existing persistent reservation and + * shall completethe command with GOOD status. + */ + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_SENT_TO_TRANSPORT; + } + /* + * Otherwise, our *pr_reg becomes the PR reservation holder for said + * TYPE/SCOPE. Also set the received scope and type in *pr_reg. + */ + pr_reg->pr_res_scope = scope; + pr_reg->pr_res_type = type; + pr_reg->pr_res_holder = 1; + dev->dev_pr_res_holder = pr_reg; + prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + + printk(KERN_INFO "SPC-3 PR [%s] Service Action: RESERVE created new" + " reservation holder TYPE: %s ALL_TG_PT: %d\n", + CMD_TFO(cmd)->get_fabric_name(), core_scsi3_pr_dump_type(type), + (pr_reg->pr_reg_all_tg_pt) ? 1 : 0); + printk(KERN_INFO "SPC-3 PR [%s] RESERVE Node: %s%s\n", + CMD_TFO(cmd)->get_fabric_name(), + se_sess->se_node_acl->initiatorname, + (prf_isid) ? &i_buf[0] : ""); + spin_unlock(&dev->dev_reservation_lock); + + if (pr_tmpl->pr_aptpl_active) { + ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), + &pr_reg->pr_aptpl_buf[0], + pr_tmpl->pr_aptpl_buf_len); + if (!(ret)) + printk(KERN_INFO "SPC-3 PR: Updated APTPL metadata" + " for RESERVE\n"); + } + + core_scsi3_put_pr_reg(pr_reg); + return 0; +} + +static int core_scsi3_emulate_pro_reserve( + struct se_cmd *cmd, + int type, + int scope, + u64 res_key) +{ + struct se_device *dev = cmd->se_dev; + int ret = 0; + + switch (type) { + case PR_TYPE_WRITE_EXCLUSIVE: + case PR_TYPE_EXCLUSIVE_ACCESS: + case PR_TYPE_WRITE_EXCLUSIVE_REGONLY: + case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY: + case PR_TYPE_WRITE_EXCLUSIVE_ALLREG: + case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG: + ret = core_scsi3_pro_reserve(cmd, dev, type, scope, res_key); + break; + default: + printk(KERN_ERR "SPC-3 PR: Unknown Service Action RESERVE Type:" + " 0x%02x\n", type); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + + return ret; +} + +/* + * Called with struct se_device->dev_reservation_lock held. + */ +static void __core_scsi3_complete_pro_release( + struct se_device *dev, + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int explict) +{ + struct target_core_fabric_ops *tfo = se_nacl->se_tpg->se_tpg_tfo; + char i_buf[PR_REG_ISID_ID_LEN]; + int prf_isid; + + memset(i_buf, 0, PR_REG_ISID_ID_LEN); + prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + /* + * Go ahead and release the current PR reservation holder. + */ + dev->dev_pr_res_holder = NULL; + + printk(KERN_INFO "SPC-3 PR [%s] Service Action: %s RELEASE cleared" + " reservation holder TYPE: %s ALL_TG_PT: %d\n", + tfo->get_fabric_name(), (explict) ? "explict" : "implict", + core_scsi3_pr_dump_type(pr_reg->pr_res_type), + (pr_reg->pr_reg_all_tg_pt) ? 1 : 0); + printk(KERN_INFO "SPC-3 PR [%s] RELEASE Node: %s%s\n", + tfo->get_fabric_name(), se_nacl->initiatorname, + (prf_isid) ? &i_buf[0] : ""); + /* + * Clear TYPE and SCOPE for the next PROUT Service Action: RESERVE + */ + pr_reg->pr_res_holder = pr_reg->pr_res_type = pr_reg->pr_res_scope = 0; +} + +static int core_scsi3_emulate_pro_release( + struct se_cmd *cmd, + int type, + int scope, + u64 res_key) +{ + struct se_device *dev = cmd->se_dev; + struct se_session *se_sess = SE_SESS(cmd); + struct se_lun *se_lun = SE_LUN(cmd); + struct t10_pr_registration *pr_reg, *pr_reg_p, *pr_res_holder; + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + int ret, all_reg = 0; + + if (!(se_sess) || !(se_lun)) { + printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + /* + * Locate the existing *pr_reg via struct se_node_acl pointers + */ + pr_reg = core_scsi3_locate_pr_reg(dev, se_sess->se_node_acl, se_sess); + if (!(pr_reg)) { + printk(KERN_ERR "SPC-3 PR: Unable to locate" + " PR_REGISTERED *pr_reg for RELEASE\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + /* + * From spc4r17 Section 5.7.11.2 Releasing: + * + * If there is no persistent reservation or in response to a persistent + * reservation release request from a registered I_T nexus that is not a + * persistent reservation holder (see 5.7.10), the device server shall + * do the following: + * + * a) Not release the persistent reservation, if any; + * b) Not remove any registrations; and + * c) Complete the command with GOOD status. + */ + spin_lock(&dev->dev_reservation_lock); + pr_res_holder = dev->dev_pr_res_holder; + if (!(pr_res_holder)) { + /* + * No persistent reservation, return GOOD status. + */ + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_SENT_TO_TRANSPORT; + } + if ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || + (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) + all_reg = 1; + + if ((all_reg == 0) && (pr_res_holder != pr_reg)) { + /* + * Non 'All Registrants' PR Type cases.. + * Release request from a registered I_T nexus that is not a + * persistent reservation holder. return GOOD status. + */ + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_SENT_TO_TRANSPORT; + } + /* + * From spc4r17 Section 5.7.11.2 Releasing: + * + * Only the persistent reservation holder (see 5.7.10) is allowed to + * release a persistent reservation. + * + * An application client releases the persistent reservation by issuing + * a PERSISTENT RESERVE OUT command with RELEASE service action through + * an I_T nexus that is a persistent reservation holder with the + * following parameters: + * + * a) RESERVATION KEY field set to the value of the reservation key + * that is registered with the logical unit for the I_T nexus; + */ + if (res_key != pr_reg->pr_res_key) { + printk(KERN_ERR "SPC-3 PR RELEASE: Received res_key: 0x%016Lx" + " does not match existing SA REGISTER res_key:" + " 0x%016Lx\n", res_key, pr_reg->pr_res_key); + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * From spc4r17 Section 5.7.11.2 Releasing and above: + * + * b) TYPE field and SCOPE field set to match the persistent + * reservation being released. + */ + if ((pr_res_holder->pr_res_type != type) || + (pr_res_holder->pr_res_scope != scope)) { + struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl; + printk(KERN_ERR "SPC-3 PR RELEASE: Attempted to release" + " reservation from [%s]: %s with different TYPE " + "and/or SCOPE while reservation already held by" + " [%s]: %s, returning RESERVATION_CONFLICT\n", + CMD_TFO(cmd)->get_fabric_name(), + se_sess->se_node_acl->initiatorname, + TPG_TFO(pr_res_nacl->se_tpg)->get_fabric_name(), + pr_res_holder->pr_reg_nacl->initiatorname); + + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * In response to a persistent reservation release request from the + * persistent reservation holder the device server shall perform a + * release by doing the following as an uninterrupted series of actions: + * a) Release the persistent reservation; + * b) Not remove any registration(s); + * c) If the released persistent reservation is a registrants only type + * or all registrants type persistent reservation, + * the device server shall establish a unit attention condition for + * the initiator port associated with every regis- + * tered I_T nexus other than I_T nexus on which the PERSISTENT + * RESERVE OUT command with RELEASE service action was received, + * with the additional sense code set to RESERVATIONS RELEASED; and + * d) If the persistent reservation is of any other type, the device + * server shall not establish a unit attention condition. + */ + __core_scsi3_complete_pro_release(dev, se_sess->se_node_acl, + pr_reg, 1); + + spin_unlock(&dev->dev_reservation_lock); + + if ((type != PR_TYPE_WRITE_EXCLUSIVE_REGONLY) && + (type != PR_TYPE_EXCLUSIVE_ACCESS_REGONLY) && + (type != PR_TYPE_WRITE_EXCLUSIVE_ALLREG) && + (type != PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) { + /* + * If no UNIT ATTENTION conditions will be established for + * PR_TYPE_WRITE_EXCLUSIVE or PR_TYPE_EXCLUSIVE_ACCESS + * go ahead and check for APTPL=1 update+write below + */ + goto write_aptpl; + } + + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry(pr_reg_p, &pr_tmpl->registration_list, + pr_reg_list) { + /* + * Do not establish a UNIT ATTENTION condition + * for the calling I_T Nexus + */ + if (pr_reg_p == pr_reg) + continue; + + core_scsi3_ua_allocate(pr_reg_p->pr_reg_nacl, + pr_reg_p->pr_res_mapped_lun, + 0x2A, ASCQ_2AH_RESERVATIONS_RELEASED); + } + spin_unlock(&pr_tmpl->registration_lock); + +write_aptpl: + if (pr_tmpl->pr_aptpl_active) { + ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), + &pr_reg->pr_aptpl_buf[0], + pr_tmpl->pr_aptpl_buf_len); + if (!(ret)) + printk("SPC-3 PR: Updated APTPL metadata for RELEASE\n"); + } + + core_scsi3_put_pr_reg(pr_reg); + return 0; +} + +static int core_scsi3_emulate_pro_clear( + struct se_cmd *cmd, + u64 res_key) +{ + struct se_device *dev = cmd->se_dev; + struct se_node_acl *pr_reg_nacl; + struct se_session *se_sess = SE_SESS(cmd); + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_reg_n, *pr_res_holder; + u32 pr_res_mapped_lun = 0; + int calling_it_nexus = 0; + /* + * Locate the existing *pr_reg via struct se_node_acl pointers + */ + pr_reg_n = core_scsi3_locate_pr_reg(SE_DEV(cmd), + se_sess->se_node_acl, se_sess); + if (!(pr_reg_n)) { + printk(KERN_ERR "SPC-3 PR: Unable to locate" + " PR_REGISTERED *pr_reg for CLEAR\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + /* + * From spc4r17 section 5.7.11.6, Clearing: + * + * Any application client may release the persistent reservation and + * remove all registrations from a device server by issuing a + * PERSISTENT RESERVE OUT command with CLEAR service action through a + * registered I_T nexus with the following parameter: + * + * a) RESERVATION KEY field set to the value of the reservation key + * that is registered with the logical unit for the I_T nexus. + */ + if (res_key != pr_reg_n->pr_res_key) { + printk(KERN_ERR "SPC-3 PR REGISTER: Received" + " res_key: 0x%016Lx does not match" + " existing SA REGISTER res_key:" + " 0x%016Lx\n", res_key, pr_reg_n->pr_res_key); + core_scsi3_put_pr_reg(pr_reg_n); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * a) Release the persistent reservation, if any; + */ + spin_lock(&dev->dev_reservation_lock); + pr_res_holder = dev->dev_pr_res_holder; + if (pr_res_holder) { + struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl; + __core_scsi3_complete_pro_release(dev, pr_res_nacl, + pr_res_holder, 0); + } + spin_unlock(&dev->dev_reservation_lock); + /* + * b) Remove all registration(s) (see spc4r17 5.7.7); + */ + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, + &pr_tmpl->registration_list, pr_reg_list) { + + calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; + pr_reg_nacl = pr_reg->pr_reg_nacl; + pr_res_mapped_lun = pr_reg->pr_res_mapped_lun; + __core_scsi3_free_registration(dev, pr_reg, NULL, + calling_it_nexus); + /* + * e) Establish a unit attention condition for the initiator + * port associated with every registered I_T nexus other + * than the I_T nexus on which the PERSISTENT RESERVE OUT + * command with CLEAR service action was received, with the + * additional sense code set to RESERVATIONS PREEMPTED. + */ + if (!(calling_it_nexus)) + core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, + 0x2A, ASCQ_2AH_RESERVATIONS_PREEMPTED); + } + spin_unlock(&pr_tmpl->registration_lock); + + printk(KERN_INFO "SPC-3 PR [%s] Service Action: CLEAR complete\n", + CMD_TFO(cmd)->get_fabric_name()); + + if (pr_tmpl->pr_aptpl_active) { + core_scsi3_update_and_write_aptpl(SE_DEV(cmd), NULL, 0); + printk(KERN_INFO "SPC-3 PR: Updated APTPL metadata" + " for CLEAR\n"); + } + + core_scsi3_pr_generation(dev); + return 0; +} + +/* + * Called with struct se_device->dev_reservation_lock held. + */ +static void __core_scsi3_complete_pro_preempt( + struct se_device *dev, + struct t10_pr_registration *pr_reg, + struct list_head *preempt_and_abort_list, + int type, + int scope, + int abort) +{ + struct se_node_acl *nacl = pr_reg->pr_reg_nacl; + struct target_core_fabric_ops *tfo = nacl->se_tpg->se_tpg_tfo; + char i_buf[PR_REG_ISID_ID_LEN]; + int prf_isid; + + memset(i_buf, 0, PR_REG_ISID_ID_LEN); + prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + /* + * Do an implict RELEASE of the existing reservation. + */ + if (dev->dev_pr_res_holder) + __core_scsi3_complete_pro_release(dev, nacl, + dev->dev_pr_res_holder, 0); + + dev->dev_pr_res_holder = pr_reg; + pr_reg->pr_res_holder = 1; + pr_reg->pr_res_type = type; + pr_reg->pr_res_scope = scope; + + printk(KERN_INFO "SPC-3 PR [%s] Service Action: PREEMPT%s created new" + " reservation holder TYPE: %s ALL_TG_PT: %d\n", + tfo->get_fabric_name(), (abort) ? "_AND_ABORT" : "", + core_scsi3_pr_dump_type(type), + (pr_reg->pr_reg_all_tg_pt) ? 1 : 0); + printk(KERN_INFO "SPC-3 PR [%s] PREEMPT%s from Node: %s%s\n", + tfo->get_fabric_name(), (abort) ? "_AND_ABORT" : "", + nacl->initiatorname, (prf_isid) ? &i_buf[0] : ""); + /* + * For PREEMPT_AND_ABORT, add the preempting reservation's + * struct t10_pr_registration to the list that will be compared + * against received CDBs.. + */ + if (preempt_and_abort_list) + list_add_tail(&pr_reg->pr_reg_abort_list, + preempt_and_abort_list); +} + +static void core_scsi3_release_preempt_and_abort( + struct list_head *preempt_and_abort_list, + struct t10_pr_registration *pr_reg_holder) +{ + struct t10_pr_registration *pr_reg, *pr_reg_tmp; + + list_for_each_entry_safe(pr_reg, pr_reg_tmp, preempt_and_abort_list, + pr_reg_abort_list) { + + list_del(&pr_reg->pr_reg_abort_list); + if (pr_reg_holder == pr_reg) + continue; + if (pr_reg->pr_res_holder) { + printk(KERN_WARNING "pr_reg->pr_res_holder still set\n"); + continue; + } + + pr_reg->pr_reg_deve = NULL; + pr_reg->pr_reg_nacl = NULL; + kfree(pr_reg->pr_aptpl_buf); + kmem_cache_free(t10_pr_reg_cache, pr_reg); + } +} + +int core_scsi3_check_cdb_abort_and_preempt( + struct list_head *preempt_and_abort_list, + struct se_cmd *cmd) +{ + struct t10_pr_registration *pr_reg, *pr_reg_tmp; + + list_for_each_entry_safe(pr_reg, pr_reg_tmp, preempt_and_abort_list, + pr_reg_abort_list) { + if (pr_reg->pr_res_key == cmd->pr_res_key) + return 0; + } + + return 1; +} + +static int core_scsi3_pro_preempt( + struct se_cmd *cmd, + int type, + int scope, + u64 res_key, + u64 sa_res_key, + int abort) +{ + struct se_device *dev = SE_DEV(cmd); + struct se_dev_entry *se_deve; + struct se_node_acl *pr_reg_nacl; + struct se_session *se_sess = SE_SESS(cmd); + struct list_head preempt_and_abort_list; + struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_reg_n, *pr_res_holder; + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + u32 pr_res_mapped_lun = 0; + int all_reg = 0, calling_it_nexus = 0, released_regs = 0; + int prh_type = 0, prh_scope = 0, ret; + + if (!(se_sess)) + return PYX_TRANSPORT_LU_COMM_FAILURE; + + se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; + pr_reg_n = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl, + se_sess); + if (!(pr_reg_n)) { + printk(KERN_ERR "SPC-3 PR: Unable to locate" + " PR_REGISTERED *pr_reg for PREEMPT%s\n", + (abort) ? "_AND_ABORT" : ""); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + if (pr_reg_n->pr_res_key != res_key) { + core_scsi3_put_pr_reg(pr_reg_n); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + if (scope != PR_SCOPE_LU_SCOPE) { + printk(KERN_ERR "SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope); + core_scsi3_put_pr_reg(pr_reg_n); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + INIT_LIST_HEAD(&preempt_and_abort_list); + + spin_lock(&dev->dev_reservation_lock); + pr_res_holder = dev->dev_pr_res_holder; + if (pr_res_holder && + ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || + (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG))) + all_reg = 1; + + if (!(all_reg) && !(sa_res_key)) { + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg_n); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + /* + * From spc4r17, section 5.7.11.4.4 Removing Registrations: + * + * If the SERVICE ACTION RESERVATION KEY field does not identify a + * persistent reservation holder or there is no persistent reservation + * holder (i.e., there is no persistent reservation), then the device + * server shall perform a preempt by doing the following in an + * uninterrupted series of actions. (See below..) + */ + if (!(pr_res_holder) || (pr_res_holder->pr_res_key != sa_res_key)) { + /* + * No existing or SA Reservation Key matching reservations.. + * + * PROUT SA PREEMPT with All Registrant type reservations are + * allowed to be processed without a matching SA Reservation Key + */ + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, + &pr_tmpl->registration_list, pr_reg_list) { + /* + * Removing of registrations in non all registrants + * type reservations without a matching SA reservation + * key. + * + * a) Remove the registrations for all I_T nexuses + * specified by the SERVICE ACTION RESERVATION KEY + * field; + * b) Ignore the contents of the SCOPE and TYPE fields; + * c) Process tasks as defined in 5.7.1; and + * d) Establish a unit attention condition for the + * initiator port associated with every I_T nexus + * that lost its registration other than the I_T + * nexus on which the PERSISTENT RESERVE OUT command + * was received, with the additional sense code set + * to REGISTRATIONS PREEMPTED. + */ + if (!(all_reg)) { + if (pr_reg->pr_res_key != sa_res_key) + continue; + + calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; + pr_reg_nacl = pr_reg->pr_reg_nacl; + pr_res_mapped_lun = pr_reg->pr_res_mapped_lun; + __core_scsi3_free_registration(dev, pr_reg, + (abort) ? &preempt_and_abort_list : + NULL, calling_it_nexus); + released_regs++; + } else { + /* + * Case for any existing all registrants type + * reservation, follow logic in spc4r17 section + * 5.7.11.4 Preempting, Table 52 and Figure 7. + * + * For a ZERO SA Reservation key, release + * all other registrations and do an implict + * release of active persistent reservation. + * + * For a non-ZERO SA Reservation key, only + * release the matching reservation key from + * registrations. + */ + if ((sa_res_key) && + (pr_reg->pr_res_key != sa_res_key)) + continue; + + calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; + if (calling_it_nexus) + continue; + + pr_reg_nacl = pr_reg->pr_reg_nacl; + pr_res_mapped_lun = pr_reg->pr_res_mapped_lun; + __core_scsi3_free_registration(dev, pr_reg, + (abort) ? &preempt_and_abort_list : + NULL, 0); + released_regs++; + } + if (!(calling_it_nexus)) + core_scsi3_ua_allocate(pr_reg_nacl, + pr_res_mapped_lun, 0x2A, + ASCQ_2AH_RESERVATIONS_PREEMPTED); + } + spin_unlock(&pr_tmpl->registration_lock); + /* + * If a PERSISTENT RESERVE OUT with a PREEMPT service action or + * a PREEMPT AND ABORT service action sets the SERVICE ACTION + * RESERVATION KEY field to a value that does not match any + * registered reservation key, then the device server shall + * complete the command with RESERVATION CONFLICT status. + */ + if (!(released_regs)) { + spin_unlock(&dev->dev_reservation_lock); + core_scsi3_put_pr_reg(pr_reg_n); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * For an existing all registrants type reservation + * with a zero SA rservation key, preempt the existing + * reservation with the new PR type and scope. + */ + if (pr_res_holder && all_reg && !(sa_res_key)) { + __core_scsi3_complete_pro_preempt(dev, pr_reg_n, + (abort) ? &preempt_and_abort_list : NULL, + type, scope, abort); + + if (abort) + core_scsi3_release_preempt_and_abort( + &preempt_and_abort_list, pr_reg_n); + } + spin_unlock(&dev->dev_reservation_lock); + + if (pr_tmpl->pr_aptpl_active) { + ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), + &pr_reg_n->pr_aptpl_buf[0], + pr_tmpl->pr_aptpl_buf_len); + if (!(ret)) + printk(KERN_INFO "SPC-3 PR: Updated APTPL" + " metadata for PREEMPT%s\n", (abort) ? + "_AND_ABORT" : ""); + } + + core_scsi3_put_pr_reg(pr_reg_n); + core_scsi3_pr_generation(SE_DEV(cmd)); + return 0; + } + /* + * The PREEMPTing SA reservation key matches that of the + * existing persistent reservation, first, we check if + * we are preempting our own reservation. + * From spc4r17, section 5.7.11.4.3 Preempting + * persistent reservations and registration handling + * + * If an all registrants persistent reservation is not + * present, it is not an error for the persistent + * reservation holder to preempt itself (i.e., a + * PERSISTENT RESERVE OUT with a PREEMPT service action + * or a PREEMPT AND ABORT service action with the + * SERVICE ACTION RESERVATION KEY value equal to the + * persistent reservation holder's reservation key that + * is received from the persistent reservation holder). + * In that case, the device server shall establish the + * new persistent reservation and maintain the + * registration. + */ + prh_type = pr_res_holder->pr_res_type; + prh_scope = pr_res_holder->pr_res_scope; + /* + * If the SERVICE ACTION RESERVATION KEY field identifies a + * persistent reservation holder (see 5.7.10), the device + * server shall perform a preempt by doing the following as + * an uninterrupted series of actions: + * + * a) Release the persistent reservation for the holder + * identified by the SERVICE ACTION RESERVATION KEY field; + */ + if (pr_reg_n != pr_res_holder) + __core_scsi3_complete_pro_release(dev, + pr_res_holder->pr_reg_nacl, + dev->dev_pr_res_holder, 0); + /* + * b) Remove the registrations for all I_T nexuses identified + * by the SERVICE ACTION RESERVATION KEY field, except the + * I_T nexus that is being used for the PERSISTENT RESERVE + * OUT command. If an all registrants persistent reservation + * is present and the SERVICE ACTION RESERVATION KEY field + * is set to zero, then all registrations shall be removed + * except for that of the I_T nexus that is being used for + * the PERSISTENT RESERVE OUT command; + */ + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, + &pr_tmpl->registration_list, pr_reg_list) { + + calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; + if (calling_it_nexus) + continue; + + if (pr_reg->pr_res_key != sa_res_key) + continue; + + pr_reg_nacl = pr_reg->pr_reg_nacl; + pr_res_mapped_lun = pr_reg->pr_res_mapped_lun; + __core_scsi3_free_registration(dev, pr_reg, + (abort) ? &preempt_and_abort_list : NULL, + calling_it_nexus); + /* + * e) Establish a unit attention condition for the initiator + * port associated with every I_T nexus that lost its + * persistent reservation and/or registration, with the + * additional sense code set to REGISTRATIONS PREEMPTED; + */ + core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A, + ASCQ_2AH_RESERVATIONS_PREEMPTED); + } + spin_unlock(&pr_tmpl->registration_lock); + /* + * c) Establish a persistent reservation for the preempting + * I_T nexus using the contents of the SCOPE and TYPE fields; + */ + __core_scsi3_complete_pro_preempt(dev, pr_reg_n, + (abort) ? &preempt_and_abort_list : NULL, + type, scope, abort); + /* + * d) Process tasks as defined in 5.7.1; + * e) See above.. + * f) If the type or scope has changed, then for every I_T nexus + * whose reservation key was not removed, except for the I_T + * nexus on which the PERSISTENT RESERVE OUT command was + * received, the device server shall establish a unit + * attention condition for the initiator port associated with + * that I_T nexus, with the additional sense code set to + * RESERVATIONS RELEASED. If the type or scope have not + * changed, then no unit attention condition(s) shall be + * established for this reason. + */ + if ((prh_type != type) || (prh_scope != scope)) { + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, + &pr_tmpl->registration_list, pr_reg_list) { + + calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0; + if (calling_it_nexus) + continue; + + core_scsi3_ua_allocate(pr_reg->pr_reg_nacl, + pr_reg->pr_res_mapped_lun, 0x2A, + ASCQ_2AH_RESERVATIONS_RELEASED); + } + spin_unlock(&pr_tmpl->registration_lock); + } + spin_unlock(&dev->dev_reservation_lock); + /* + * Call LUN_RESET logic upon list of struct t10_pr_registration, + * All received CDBs for the matching existing reservation and + * registrations undergo ABORT_TASK logic. + * + * From there, core_scsi3_release_preempt_and_abort() will + * release every registration in the list (which have already + * been removed from the primary pr_reg list), except the + * new persistent reservation holder, the calling Initiator Port. + */ + if (abort) { + core_tmr_lun_reset(dev, NULL, &preempt_and_abort_list, cmd); + core_scsi3_release_preempt_and_abort(&preempt_and_abort_list, + pr_reg_n); + } + + if (pr_tmpl->pr_aptpl_active) { + ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), + &pr_reg_n->pr_aptpl_buf[0], + pr_tmpl->pr_aptpl_buf_len); + if (!(ret)) + printk("SPC-3 PR: Updated APTPL metadata for PREEMPT" + "%s\n", (abort) ? "_AND_ABORT" : ""); + } + + core_scsi3_put_pr_reg(pr_reg_n); + core_scsi3_pr_generation(SE_DEV(cmd)); + return 0; +} + +static int core_scsi3_emulate_pro_preempt( + struct se_cmd *cmd, + int type, + int scope, + u64 res_key, + u64 sa_res_key, + int abort) +{ + int ret = 0; + + switch (type) { + case PR_TYPE_WRITE_EXCLUSIVE: + case PR_TYPE_EXCLUSIVE_ACCESS: + case PR_TYPE_WRITE_EXCLUSIVE_REGONLY: + case PR_TYPE_EXCLUSIVE_ACCESS_REGONLY: + case PR_TYPE_WRITE_EXCLUSIVE_ALLREG: + case PR_TYPE_EXCLUSIVE_ACCESS_ALLREG: + ret = core_scsi3_pro_preempt(cmd, type, scope, + res_key, sa_res_key, abort); + break; + default: + printk(KERN_ERR "SPC-3 PR: Unknown Service Action PREEMPT%s" + " Type: 0x%02x\n", (abort) ? "_AND_ABORT" : "", type); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + + return ret; +} + + +static int core_scsi3_emulate_pro_register_and_move( + struct se_cmd *cmd, + u64 res_key, + u64 sa_res_key, + int aptpl, + int unreg) +{ + struct se_session *se_sess = SE_SESS(cmd); + struct se_device *dev = SE_DEV(cmd); + struct se_dev_entry *se_deve, *dest_se_deve = NULL; + struct se_lun *se_lun = SE_LUN(cmd); + struct se_node_acl *pr_res_nacl, *pr_reg_nacl, *dest_node_acl = NULL; + struct se_port *se_port; + struct se_portal_group *se_tpg, *dest_se_tpg = NULL; + struct target_core_fabric_ops *dest_tf_ops = NULL, *tf_ops; + struct t10_pr_registration *pr_reg, *pr_res_holder, *dest_pr_reg; + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; + unsigned char *initiator_str; + char *iport_ptr = NULL, dest_iport[64], i_buf[PR_REG_ISID_ID_LEN]; + u32 tid_len, tmp_tid_len; + int new_reg = 0, type, scope, ret, matching_iname, prf_isid; + unsigned short rtpi; + unsigned char proto_ident; + + if (!(se_sess) || !(se_lun)) { + printk(KERN_ERR "SPC-3 PR: se_sess || struct se_lun is NULL!\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + memset(dest_iport, 0, 64); + memset(i_buf, 0, PR_REG_ISID_ID_LEN); + se_tpg = se_sess->se_tpg; + tf_ops = TPG_TFO(se_tpg); + se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; + /* + * Follow logic from spc4r17 Section 5.7.8, Table 50 -- + * Register behaviors for a REGISTER AND MOVE service action + * + * Locate the existing *pr_reg via struct se_node_acl pointers + */ + pr_reg = core_scsi3_locate_pr_reg(SE_DEV(cmd), se_sess->se_node_acl, + se_sess); + if (!(pr_reg)) { + printk(KERN_ERR "SPC-3 PR: Unable to locate PR_REGISTERED" + " *pr_reg for REGISTER_AND_MOVE\n"); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + /* + * The provided reservation key much match the existing reservation key + * provided during this initiator's I_T nexus registration. + */ + if (res_key != pr_reg->pr_res_key) { + printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Received" + " res_key: 0x%016Lx does not match existing SA REGISTER" + " res_key: 0x%016Lx\n", res_key, pr_reg->pr_res_key); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + /* + * The service active reservation key needs to be non zero + */ + if (!(sa_res_key)) { + printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Received zero" + " sa_res_key\n"); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + /* + * Determine the Relative Target Port Identifier where the reservation + * will be moved to for the TransportID containing SCSI initiator WWN + * information. + */ + rtpi = (buf[18] & 0xff) << 8; + rtpi |= buf[19] & 0xff; + tid_len = (buf[20] & 0xff) << 24; + tid_len |= (buf[21] & 0xff) << 16; + tid_len |= (buf[22] & 0xff) << 8; + tid_len |= buf[23] & 0xff; + + if ((tid_len + 24) != cmd->data_length) { + printk(KERN_ERR "SPC-3 PR: Illegal tid_len: %u + 24 byte header" + " does not equal CDB data_length: %u\n", tid_len, + cmd->data_length); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + + spin_lock(&dev->se_port_lock); + list_for_each_entry(se_port, &dev->dev_sep_list, sep_list) { + if (se_port->sep_rtpi != rtpi) + continue; + dest_se_tpg = se_port->sep_tpg; + if (!(dest_se_tpg)) + continue; + dest_tf_ops = TPG_TFO(dest_se_tpg); + if (!(dest_tf_ops)) + continue; + + atomic_inc(&dest_se_tpg->tpg_pr_ref_count); + smp_mb__after_atomic_inc(); + spin_unlock(&dev->se_port_lock); + + ret = core_scsi3_tpg_depend_item(dest_se_tpg); + if (ret != 0) { + printk(KERN_ERR "core_scsi3_tpg_depend_item() failed" + " for dest_se_tpg\n"); + atomic_dec(&dest_se_tpg->tpg_pr_ref_count); + smp_mb__after_atomic_dec(); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + + spin_lock(&dev->se_port_lock); + break; + } + spin_unlock(&dev->se_port_lock); + + if (!(dest_se_tpg) || (!dest_tf_ops)) { + printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Unable to locate" + " fabric ops from Relative Target Port Identifier:" + " %hu\n", rtpi); + core_scsi3_put_pr_reg(pr_reg); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + proto_ident = (buf[24] & 0x0f); +#if 0 + printk("SPC-3 PR REGISTER_AND_MOVE: Extracted Protocol Identifier:" + " 0x%02x\n", proto_ident); +#endif + if (proto_ident != dest_tf_ops->get_fabric_proto_ident(dest_se_tpg)) { + printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Received" + " proto_ident: 0x%02x does not match ident: 0x%02x" + " from fabric: %s\n", proto_ident, + dest_tf_ops->get_fabric_proto_ident(dest_se_tpg), + dest_tf_ops->get_fabric_name()); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + if (dest_tf_ops->tpg_parse_pr_out_transport_id == NULL) { + printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Fabric does not" + " containg a valid tpg_parse_pr_out_transport_id" + " function pointer\n"); + ret = PYX_TRANSPORT_LU_COMM_FAILURE; + goto out; + } + initiator_str = dest_tf_ops->tpg_parse_pr_out_transport_id(dest_se_tpg, + (const char *)&buf[24], &tmp_tid_len, &iport_ptr); + if (!(initiator_str)) { + printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: Unable to locate" + " initiator_str from Transport ID\n"); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + + printk(KERN_INFO "SPC-3 PR [%s] Extracted initiator %s identifier: %s" + " %s\n", dest_tf_ops->get_fabric_name(), (iport_ptr != NULL) ? + "port" : "device", initiator_str, (iport_ptr != NULL) ? + iport_ptr : ""); + /* + * If a PERSISTENT RESERVE OUT command with a REGISTER AND MOVE service + * action specifies a TransportID that is the same as the initiator port + * of the I_T nexus for the command received, then the command shall + * be terminated with CHECK CONDITION status, with the sense key set to + * ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD + * IN PARAMETER LIST. + */ + pr_reg_nacl = pr_reg->pr_reg_nacl; + matching_iname = (!strcmp(initiator_str, + pr_reg_nacl->initiatorname)) ? 1 : 0; + if (!(matching_iname)) + goto after_iport_check; + + if (!(iport_ptr) || !(pr_reg->isid_present_at_reg)) { + printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: TransportID: %s" + " matches: %s on received I_T Nexus\n", initiator_str, + pr_reg_nacl->initiatorname); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + if (!(strcmp(iport_ptr, pr_reg->pr_reg_isid))) { + printk(KERN_ERR "SPC-3 PR REGISTER_AND_MOVE: TransportID: %s %s" + " matches: %s %s on received I_T Nexus\n", + initiator_str, iport_ptr, pr_reg_nacl->initiatorname, + pr_reg->pr_reg_isid); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } +after_iport_check: + /* + * Locate the destination struct se_node_acl from the received Transport ID + */ + spin_lock_bh(&dest_se_tpg->acl_node_lock); + dest_node_acl = __core_tpg_get_initiator_node_acl(dest_se_tpg, + initiator_str); + if (dest_node_acl) { + atomic_inc(&dest_node_acl->acl_pr_ref_count); + smp_mb__after_atomic_inc(); + } + spin_unlock_bh(&dest_se_tpg->acl_node_lock); + + if (!(dest_node_acl)) { + printk(KERN_ERR "Unable to locate %s dest_node_acl for" + " TransportID%s\n", dest_tf_ops->get_fabric_name(), + initiator_str); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + ret = core_scsi3_nodeacl_depend_item(dest_node_acl); + if (ret != 0) { + printk(KERN_ERR "core_scsi3_nodeacl_depend_item() for" + " dest_node_acl\n"); + atomic_dec(&dest_node_acl->acl_pr_ref_count); + smp_mb__after_atomic_dec(); + dest_node_acl = NULL; + ret = PYX_TRANSPORT_LU_COMM_FAILURE; + goto out; + } +#if 0 + printk(KERN_INFO "SPC-3 PR REGISTER_AND_MOVE: Found %s dest_node_acl:" + " %s from TransportID\n", dest_tf_ops->get_fabric_name(), + dest_node_acl->initiatorname); +#endif + /* + * Locate the struct se_dev_entry pointer for the matching RELATIVE TARGET + * PORT IDENTIFIER. + */ + dest_se_deve = core_get_se_deve_from_rtpi(dest_node_acl, rtpi); + if (!(dest_se_deve)) { + printk(KERN_ERR "Unable to locate %s dest_se_deve from RTPI:" + " %hu\n", dest_tf_ops->get_fabric_name(), rtpi); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + + ret = core_scsi3_lunacl_depend_item(dest_se_deve); + if (ret < 0) { + printk(KERN_ERR "core_scsi3_lunacl_depend_item() failed\n"); + atomic_dec(&dest_se_deve->pr_ref_count); + smp_mb__after_atomic_dec(); + dest_se_deve = NULL; + ret = PYX_TRANSPORT_LU_COMM_FAILURE; + goto out; + } +#if 0 + printk(KERN_INFO "SPC-3 PR REGISTER_AND_MOVE: Located %s node %s LUN" + " ACL for dest_se_deve->mapped_lun: %u\n", + dest_tf_ops->get_fabric_name(), dest_node_acl->initiatorname, + dest_se_deve->mapped_lun); +#endif + /* + * A persistent reservation needs to already existing in order to + * successfully complete the REGISTER_AND_MOVE service action.. + */ + spin_lock(&dev->dev_reservation_lock); + pr_res_holder = dev->dev_pr_res_holder; + if (!(pr_res_holder)) { + printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: No reservation" + " currently held\n"); + spin_unlock(&dev->dev_reservation_lock); + ret = PYX_TRANSPORT_INVALID_CDB_FIELD; + goto out; + } + /* + * The received on I_T Nexus must be the reservation holder. + * + * From spc4r17 section 5.7.8 Table 50 -- + * Register behaviors for a REGISTER AND MOVE service action + */ + if (pr_res_holder != pr_reg) { + printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Calling I_T" + " Nexus is not reservation holder\n"); + spin_unlock(&dev->dev_reservation_lock); + ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + goto out; + } + /* + * From spc4r17 section 5.7.8: registering and moving reservation + * + * If a PERSISTENT RESERVE OUT command with a REGISTER AND MOVE service + * action is received and the established persistent reservation is a + * Write Exclusive - All Registrants type or Exclusive Access - + * All Registrants type reservation, then the command shall be completed + * with RESERVATION CONFLICT status. + */ + if ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || + (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) { + printk(KERN_WARNING "SPC-3 PR REGISTER_AND_MOVE: Unable to move" + " reservation for type: %s\n", + core_scsi3_pr_dump_type(pr_res_holder->pr_res_type)); + spin_unlock(&dev->dev_reservation_lock); + ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + goto out; + } + pr_res_nacl = pr_res_holder->pr_reg_nacl; + /* + * b) Ignore the contents of the (received) SCOPE and TYPE fields; + */ + type = pr_res_holder->pr_res_type; + scope = pr_res_holder->pr_res_type; + /* + * c) Associate the reservation key specified in the SERVICE ACTION + * RESERVATION KEY field with the I_T nexus specified as the + * destination of the register and move, where: + * A) The I_T nexus is specified by the TransportID and the + * RELATIVE TARGET PORT IDENTIFIER field (see 6.14.4); and + * B) Regardless of the TransportID format used, the association for + * the initiator port is based on either the initiator port name + * (see 3.1.71) on SCSI transport protocols where port names are + * required or the initiator port identifier (see 3.1.70) on SCSI + * transport protocols where port names are not required; + * d) Register the reservation key specified in the SERVICE ACTION + * RESERVATION KEY field; + * e) Retain the reservation key specified in the SERVICE ACTION + * RESERVATION KEY field and associated information; + * + * Also, It is not an error for a REGISTER AND MOVE service action to + * register an I_T nexus that is already registered with the same + * reservation key or a different reservation key. + */ + dest_pr_reg = __core_scsi3_locate_pr_reg(dev, dest_node_acl, + iport_ptr); + if (!(dest_pr_reg)) { + ret = core_scsi3_alloc_registration(SE_DEV(cmd), + dest_node_acl, dest_se_deve, iport_ptr, + sa_res_key, 0, aptpl, 2, 1); + if (ret != 0) { + spin_unlock(&dev->dev_reservation_lock); + ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + goto out; + } + dest_pr_reg = __core_scsi3_locate_pr_reg(dev, dest_node_acl, + iport_ptr); + new_reg = 1; + } + /* + * f) Release the persistent reservation for the persistent reservation + * holder (i.e., the I_T nexus on which the + */ + __core_scsi3_complete_pro_release(dev, pr_res_nacl, + dev->dev_pr_res_holder, 0); + /* + * g) Move the persistent reservation to the specified I_T nexus using + * the same scope and type as the persistent reservation released in + * item f); and + */ + dev->dev_pr_res_holder = dest_pr_reg; + dest_pr_reg->pr_res_holder = 1; + dest_pr_reg->pr_res_type = type; + pr_reg->pr_res_scope = scope; + prf_isid = core_pr_dump_initiator_port(pr_reg, &i_buf[0], + PR_REG_ISID_ID_LEN); + /* + * Increment PRGeneration for existing registrations.. + */ + if (!(new_reg)) + dest_pr_reg->pr_res_generation = pr_tmpl->pr_generation++; + spin_unlock(&dev->dev_reservation_lock); + + printk(KERN_INFO "SPC-3 PR [%s] Service Action: REGISTER_AND_MOVE" + " created new reservation holder TYPE: %s on object RTPI:" + " %hu PRGeneration: 0x%08x\n", dest_tf_ops->get_fabric_name(), + core_scsi3_pr_dump_type(type), rtpi, + dest_pr_reg->pr_res_generation); + printk(KERN_INFO "SPC-3 PR Successfully moved reservation from" + " %s Fabric Node: %s%s -> %s Fabric Node: %s %s\n", + tf_ops->get_fabric_name(), pr_reg_nacl->initiatorname, + (prf_isid) ? &i_buf[0] : "", dest_tf_ops->get_fabric_name(), + dest_node_acl->initiatorname, (iport_ptr != NULL) ? + iport_ptr : ""); + /* + * It is now safe to release configfs group dependencies for destination + * of Transport ID Initiator Device/Port Identifier + */ + core_scsi3_lunacl_undepend_item(dest_se_deve); + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_se_tpg); + /* + * h) If the UNREG bit is set to one, unregister (see 5.7.11.3) the I_T + * nexus on which PERSISTENT RESERVE OUT command was received. + */ + if (unreg) { + spin_lock(&pr_tmpl->registration_lock); + __core_scsi3_free_registration(dev, pr_reg, NULL, 1); + spin_unlock(&pr_tmpl->registration_lock); + } else + core_scsi3_put_pr_reg(pr_reg); + + /* + * Clear the APTPL metadata if APTPL has been disabled, otherwise + * write out the updated metadata to struct file for this SCSI device. + */ + if (!(aptpl)) { + pr_tmpl->pr_aptpl_active = 0; + core_scsi3_update_and_write_aptpl(SE_DEV(cmd), NULL, 0); + printk("SPC-3 PR: Set APTPL Bit Deactivated for" + " REGISTER_AND_MOVE\n"); + } else { + pr_tmpl->pr_aptpl_active = 1; + ret = core_scsi3_update_and_write_aptpl(SE_DEV(cmd), + &dest_pr_reg->pr_aptpl_buf[0], + pr_tmpl->pr_aptpl_buf_len); + if (!(ret)) + printk("SPC-3 PR: Set APTPL Bit Activated for" + " REGISTER_AND_MOVE\n"); + } + + core_scsi3_put_pr_reg(dest_pr_reg); + return 0; +out: + if (dest_se_deve) + core_scsi3_lunacl_undepend_item(dest_se_deve); + if (dest_node_acl) + core_scsi3_nodeacl_undepend_item(dest_node_acl); + core_scsi3_tpg_undepend_item(dest_se_tpg); + core_scsi3_put_pr_reg(pr_reg); + return ret; +} + +static unsigned long long core_scsi3_extract_reservation_key(unsigned char *cdb) +{ + unsigned int __v1, __v2; + + __v1 = (cdb[0] << 24) | (cdb[1] << 16) | (cdb[2] << 8) | cdb[3]; + __v2 = (cdb[4] << 24) | (cdb[5] << 16) | (cdb[6] << 8) | cdb[7]; + + return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32; +} + +/* + * See spc4r17 section 6.14 Table 170 + */ +static int core_scsi3_emulate_pr_out(struct se_cmd *cmd, unsigned char *cdb) +{ + unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; + u64 res_key, sa_res_key; + int sa, scope, type, aptpl; + int spec_i_pt = 0, all_tg_pt = 0, unreg = 0; + /* + * FIXME: A NULL struct se_session pointer means an this is not coming from + * a $FABRIC_MOD's nexus, but from internal passthrough ops. + */ + if (!(SE_SESS(cmd))) + return PYX_TRANSPORT_LU_COMM_FAILURE; + + if (cmd->data_length < 24) { + printk(KERN_WARNING "SPC-PR: Recieved PR OUT parameter list" + " length too small: %u\n", cmd->data_length); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + /* + * From the PERSISTENT_RESERVE_OUT command descriptor block (CDB) + */ + sa = (cdb[1] & 0x1f); + scope = (cdb[2] & 0xf0); + type = (cdb[2] & 0x0f); + /* + * From PERSISTENT_RESERVE_OUT parameter list (payload) + */ + res_key = core_scsi3_extract_reservation_key(&buf[0]); + sa_res_key = core_scsi3_extract_reservation_key(&buf[8]); + /* + * REGISTER_AND_MOVE uses a different SA parameter list containing + * SCSI TransportIDs. + */ + if (sa != PRO_REGISTER_AND_MOVE) { + spec_i_pt = (buf[20] & 0x08); + all_tg_pt = (buf[20] & 0x04); + aptpl = (buf[20] & 0x01); + } else { + aptpl = (buf[17] & 0x01); + unreg = (buf[17] & 0x02); + } + /* + * SPEC_I_PT=1 is only valid for Service action: REGISTER + */ + if (spec_i_pt && ((cdb[1] & 0x1f) != PRO_REGISTER)) + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + /* + * From spc4r17 section 6.14: + * + * If the SPEC_I_PT bit is set to zero, the service action is not + * REGISTER AND MOVE, and the parameter list length is not 24, then + * the command shall be terminated with CHECK CONDITION status, with + * the sense key set to ILLEGAL REQUEST, and the additional sense + * code set to PARAMETER LIST LENGTH ERROR. + */ + if (!(spec_i_pt) && ((cdb[1] & 0x1f) != PRO_REGISTER_AND_MOVE) && + (cmd->data_length != 24)) { + printk(KERN_WARNING "SPC-PR: Recieved PR OUT illegal parameter" + " list length: %u\n", cmd->data_length); + return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + } + /* + * (core_scsi3_emulate_pro_* function parameters + * are defined by spc4r17 Table 174: + * PERSISTENT_RESERVE_OUT service actions and valid parameters. + */ + switch (sa) { + case PRO_REGISTER: + return core_scsi3_emulate_pro_register(cmd, + res_key, sa_res_key, aptpl, all_tg_pt, spec_i_pt, 0); + case PRO_RESERVE: + return core_scsi3_emulate_pro_reserve(cmd, + type, scope, res_key); + case PRO_RELEASE: + return core_scsi3_emulate_pro_release(cmd, + type, scope, res_key); + case PRO_CLEAR: + return core_scsi3_emulate_pro_clear(cmd, res_key); + case PRO_PREEMPT: + return core_scsi3_emulate_pro_preempt(cmd, type, scope, + res_key, sa_res_key, 0); + case PRO_PREEMPT_AND_ABORT: + return core_scsi3_emulate_pro_preempt(cmd, type, scope, + res_key, sa_res_key, 1); + case PRO_REGISTER_AND_IGNORE_EXISTING_KEY: + return core_scsi3_emulate_pro_register(cmd, + 0, sa_res_key, aptpl, all_tg_pt, spec_i_pt, 1); + case PRO_REGISTER_AND_MOVE: + return core_scsi3_emulate_pro_register_and_move(cmd, res_key, + sa_res_key, aptpl, unreg); + default: + printk(KERN_ERR "Unknown PERSISTENT_RESERVE_OUT service" + " action: 0x%02x\n", cdb[1] & 0x1f); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + + return PYX_TRANSPORT_INVALID_CDB_FIELD; +} + +/* + * PERSISTENT_RESERVE_IN Service Action READ_KEYS + * + * See spc4r17 section 5.7.6.2 and section 6.13.2, Table 160 + */ +static int core_scsi3_pri_read_keys(struct se_cmd *cmd) +{ + struct se_device *se_dev = SE_DEV(cmd); + struct se_subsystem_dev *su_dev = SU_DEV(se_dev); + struct t10_pr_registration *pr_reg; + unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; + u32 add_len = 0, off = 8; + + if (cmd->data_length < 8) { + printk(KERN_ERR "PRIN SA READ_KEYS SCSI Data Length: %u" + " too small\n", cmd->data_length); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + + buf[0] = ((T10_RES(su_dev)->pr_generation >> 24) & 0xff); + buf[1] = ((T10_RES(su_dev)->pr_generation >> 16) & 0xff); + buf[2] = ((T10_RES(su_dev)->pr_generation >> 8) & 0xff); + buf[3] = (T10_RES(su_dev)->pr_generation & 0xff); + + spin_lock(&T10_RES(su_dev)->registration_lock); + list_for_each_entry(pr_reg, &T10_RES(su_dev)->registration_list, + pr_reg_list) { + /* + * Check for overflow of 8byte PRI READ_KEYS payload and + * next reservation key list descriptor. + */ + if ((add_len + 8) > (cmd->data_length - 8)) + break; + + buf[off++] = ((pr_reg->pr_res_key >> 56) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 48) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 40) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 32) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 24) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 16) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 8) & 0xff); + buf[off++] = (pr_reg->pr_res_key & 0xff); + + add_len += 8; + } + spin_unlock(&T10_RES(su_dev)->registration_lock); + + buf[4] = ((add_len >> 24) & 0xff); + buf[5] = ((add_len >> 16) & 0xff); + buf[6] = ((add_len >> 8) & 0xff); + buf[7] = (add_len & 0xff); + + return 0; +} + +/* + * PERSISTENT_RESERVE_IN Service Action READ_RESERVATION + * + * See spc4r17 section 5.7.6.3 and section 6.13.3.2 Table 161 and 162 + */ +static int core_scsi3_pri_read_reservation(struct se_cmd *cmd) +{ + struct se_device *se_dev = SE_DEV(cmd); + struct se_subsystem_dev *su_dev = SU_DEV(se_dev); + struct t10_pr_registration *pr_reg; + unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; + u64 pr_res_key; + u32 add_len = 16; /* Hardcoded to 16 when a reservation is held. */ + + if (cmd->data_length < 8) { + printk(KERN_ERR "PRIN SA READ_RESERVATIONS SCSI Data Length: %u" + " too small\n", cmd->data_length); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + + buf[0] = ((T10_RES(su_dev)->pr_generation >> 24) & 0xff); + buf[1] = ((T10_RES(su_dev)->pr_generation >> 16) & 0xff); + buf[2] = ((T10_RES(su_dev)->pr_generation >> 8) & 0xff); + buf[3] = (T10_RES(su_dev)->pr_generation & 0xff); + + spin_lock(&se_dev->dev_reservation_lock); + pr_reg = se_dev->dev_pr_res_holder; + if ((pr_reg)) { + /* + * Set the hardcoded Additional Length + */ + buf[4] = ((add_len >> 24) & 0xff); + buf[5] = ((add_len >> 16) & 0xff); + buf[6] = ((add_len >> 8) & 0xff); + buf[7] = (add_len & 0xff); + + if (cmd->data_length < 22) { + spin_unlock(&se_dev->dev_reservation_lock); + return 0; + } + /* + * Set the Reservation key. + * + * From spc4r17, section 5.7.10: + * A persistent reservation holder has its reservation key + * returned in the parameter data from a PERSISTENT + * RESERVE IN command with READ RESERVATION service action as + * follows: + * a) For a persistent reservation of the type Write Exclusive + * - All Registrants or Exclusive Access ­ All Regitrants, + * the reservation key shall be set to zero; or + * b) For all other persistent reservation types, the + * reservation key shall be set to the registered + * reservation key for the I_T nexus that holds the + * persistent reservation. + */ + if ((pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || + (pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) + pr_res_key = 0; + else + pr_res_key = pr_reg->pr_res_key; + + buf[8] = ((pr_res_key >> 56) & 0xff); + buf[9] = ((pr_res_key >> 48) & 0xff); + buf[10] = ((pr_res_key >> 40) & 0xff); + buf[11] = ((pr_res_key >> 32) & 0xff); + buf[12] = ((pr_res_key >> 24) & 0xff); + buf[13] = ((pr_res_key >> 16) & 0xff); + buf[14] = ((pr_res_key >> 8) & 0xff); + buf[15] = (pr_res_key & 0xff); + /* + * Set the SCOPE and TYPE + */ + buf[21] = (pr_reg->pr_res_scope & 0xf0) | + (pr_reg->pr_res_type & 0x0f); + } + spin_unlock(&se_dev->dev_reservation_lock); + + return 0; +} + +/* + * PERSISTENT_RESERVE_IN Service Action REPORT_CAPABILITIES + * + * See spc4r17 section 6.13.4 Table 165 + */ +static int core_scsi3_pri_report_capabilities(struct se_cmd *cmd) +{ + struct se_device *dev = SE_DEV(cmd); + struct t10_reservation_template *pr_tmpl = &SU_DEV(dev)->t10_reservation; + unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; + u16 add_len = 8; /* Hardcoded to 8. */ + + if (cmd->data_length < 6) { + printk(KERN_ERR "PRIN SA REPORT_CAPABILITIES SCSI Data Length:" + " %u too small\n", cmd->data_length); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + + buf[0] = ((add_len << 8) & 0xff); + buf[1] = (add_len & 0xff); + buf[2] |= 0x10; /* CRH: Compatible Reservation Hanlding bit. */ + buf[2] |= 0x08; /* SIP_C: Specify Initiator Ports Capable bit */ + buf[2] |= 0x04; /* ATP_C: All Target Ports Capable bit */ + buf[2] |= 0x01; /* PTPL_C: Persistence across Target Power Loss bit */ + /* + * We are filling in the PERSISTENT RESERVATION TYPE MASK below, so + * set the TMV: Task Mask Valid bit. + */ + buf[3] |= 0x80; + /* + * Change ALLOW COMMANDs to 0x20 or 0x40 later from Table 166 + */ + buf[3] |= 0x10; /* ALLOW COMMANDs field 001b */ + /* + * PTPL_A: Persistence across Target Power Loss Active bit + */ + if (pr_tmpl->pr_aptpl_active) + buf[3] |= 0x01; + /* + * Setup the PERSISTENT RESERVATION TYPE MASK from Table 167 + */ + buf[4] |= 0x80; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */ + buf[4] |= 0x40; /* PR_TYPE_EXCLUSIVE_ACCESS_REGONLY */ + buf[4] |= 0x20; /* PR_TYPE_WRITE_EXCLUSIVE_REGONLY */ + buf[4] |= 0x08; /* PR_TYPE_EXCLUSIVE_ACCESS */ + buf[4] |= 0x02; /* PR_TYPE_WRITE_EXCLUSIVE */ + buf[5] |= 0x01; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */ + + return 0; +} + +/* + * PERSISTENT_RESERVE_IN Service Action READ_FULL_STATUS + * + * See spc4r17 section 6.13.5 Table 168 and 169 + */ +static int core_scsi3_pri_read_full_status(struct se_cmd *cmd) +{ + struct se_device *se_dev = SE_DEV(cmd); + struct se_node_acl *se_nacl; + struct se_subsystem_dev *su_dev = SU_DEV(se_dev); + struct se_portal_group *se_tpg; + struct t10_pr_registration *pr_reg, *pr_reg_tmp; + struct t10_reservation_template *pr_tmpl = &SU_DEV(se_dev)->t10_reservation; + unsigned char *buf = (unsigned char *)T_TASK(cmd)->t_task_buf; + u32 add_desc_len = 0, add_len = 0, desc_len, exp_desc_len; + u32 off = 8; /* off into first Full Status descriptor */ + int format_code = 0; + + if (cmd->data_length < 8) { + printk(KERN_ERR "PRIN SA READ_FULL_STATUS SCSI Data Length: %u" + " too small\n", cmd->data_length); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + + buf[0] = ((T10_RES(su_dev)->pr_generation >> 24) & 0xff); + buf[1] = ((T10_RES(su_dev)->pr_generation >> 16) & 0xff); + buf[2] = ((T10_RES(su_dev)->pr_generation >> 8) & 0xff); + buf[3] = (T10_RES(su_dev)->pr_generation & 0xff); + + spin_lock(&pr_tmpl->registration_lock); + list_for_each_entry_safe(pr_reg, pr_reg_tmp, + &pr_tmpl->registration_list, pr_reg_list) { + + se_nacl = pr_reg->pr_reg_nacl; + se_tpg = pr_reg->pr_reg_nacl->se_tpg; + add_desc_len = 0; + + atomic_inc(&pr_reg->pr_res_holders); + smp_mb__after_atomic_inc(); + spin_unlock(&pr_tmpl->registration_lock); + /* + * Determine expected length of $FABRIC_MOD specific + * TransportID full status descriptor.. + */ + exp_desc_len = TPG_TFO(se_tpg)->tpg_get_pr_transport_id_len( + se_tpg, se_nacl, pr_reg, &format_code); + + if ((exp_desc_len + add_len) > cmd->data_length) { + printk(KERN_WARNING "SPC-3 PRIN READ_FULL_STATUS ran" + " out of buffer: %d\n", cmd->data_length); + spin_lock(&pr_tmpl->registration_lock); + atomic_dec(&pr_reg->pr_res_holders); + smp_mb__after_atomic_dec(); + break; + } + /* + * Set RESERVATION KEY + */ + buf[off++] = ((pr_reg->pr_res_key >> 56) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 48) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 40) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 32) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 24) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 16) & 0xff); + buf[off++] = ((pr_reg->pr_res_key >> 8) & 0xff); + buf[off++] = (pr_reg->pr_res_key & 0xff); + off += 4; /* Skip Over Reserved area */ + + /* + * Set ALL_TG_PT bit if PROUT SA REGISTER had this set. + */ + if (pr_reg->pr_reg_all_tg_pt) + buf[off] = 0x02; + /* + * The struct se_lun pointer will be present for the + * reservation holder for PR_HOLDER bit. + * + * Also, if this registration is the reservation + * holder, fill in SCOPE and TYPE in the next byte. + */ + if (pr_reg->pr_res_holder) { + buf[off++] |= 0x01; + buf[off++] = (pr_reg->pr_res_scope & 0xf0) | + (pr_reg->pr_res_type & 0x0f); + } else + off += 2; + + off += 4; /* Skip over reserved area */ + /* + * From spc4r17 6.3.15: + * + * If the ALL_TG_PT bit set to zero, the RELATIVE TARGET PORT + * IDENTIFIER field contains the relative port identifier (see + * 3.1.120) of the target port that is part of the I_T nexus + * described by this full status descriptor. If the ALL_TG_PT + * bit is set to one, the contents of the RELATIVE TARGET PORT + * IDENTIFIER field are not defined by this standard. + */ + if (!(pr_reg->pr_reg_all_tg_pt)) { + struct se_port *port = pr_reg->pr_reg_tg_pt_lun->lun_sep; + + buf[off++] = ((port->sep_rtpi >> 8) & 0xff); + buf[off++] = (port->sep_rtpi & 0xff); + } else + off += 2; /* Skip over RELATIVE TARGET PORT IDENTIFER */ + + /* + * Now, have the $FABRIC_MOD fill in the protocol identifier + */ + desc_len = TPG_TFO(se_tpg)->tpg_get_pr_transport_id(se_tpg, + se_nacl, pr_reg, &format_code, &buf[off+4]); + + spin_lock(&pr_tmpl->registration_lock); + atomic_dec(&pr_reg->pr_res_holders); + smp_mb__after_atomic_dec(); + /* + * Set the ADDITIONAL DESCRIPTOR LENGTH + */ + buf[off++] = ((desc_len >> 24) & 0xff); + buf[off++] = ((desc_len >> 16) & 0xff); + buf[off++] = ((desc_len >> 8) & 0xff); + buf[off++] = (desc_len & 0xff); + /* + * Size of full desctipor header minus TransportID + * containing $FABRIC_MOD specific) initiator device/port + * WWN information. + * + * See spc4r17 Section 6.13.5 Table 169 + */ + add_desc_len = (24 + desc_len); + + off += desc_len; + add_len += add_desc_len; + } + spin_unlock(&pr_tmpl->registration_lock); + /* + * Set ADDITIONAL_LENGTH + */ + buf[4] = ((add_len >> 24) & 0xff); + buf[5] = ((add_len >> 16) & 0xff); + buf[6] = ((add_len >> 8) & 0xff); + buf[7] = (add_len & 0xff); + + return 0; +} + +static int core_scsi3_emulate_pr_in(struct se_cmd *cmd, unsigned char *cdb) +{ + switch (cdb[1] & 0x1f) { + case PRI_READ_KEYS: + return core_scsi3_pri_read_keys(cmd); + case PRI_READ_RESERVATION: + return core_scsi3_pri_read_reservation(cmd); + case PRI_REPORT_CAPABILITIES: + return core_scsi3_pri_report_capabilities(cmd); + case PRI_READ_FULL_STATUS: + return core_scsi3_pri_read_full_status(cmd); + default: + printk(KERN_ERR "Unknown PERSISTENT_RESERVE_IN service" + " action: 0x%02x\n", cdb[1] & 0x1f); + return PYX_TRANSPORT_INVALID_CDB_FIELD; + } + +} + +int core_scsi3_emulate_pr(struct se_cmd *cmd) +{ + unsigned char *cdb = &T_TASK(cmd)->t_task_cdb[0]; + struct se_device *dev = cmd->se_dev; + /* + * Following spc2r20 5.5.1 Reservations overview: + * + * If a logical unit has been reserved by any RESERVE command and is + * still reserved by any initiator, all PERSISTENT RESERVE IN and all + * PERSISTENT RESERVE OUT commands shall conflict regardless of + * initiator or service action and shall terminate with a RESERVATION + * CONFLICT status. + */ + if (dev->dev_flags & DF_SPC2_RESERVATIONS) { + printk(KERN_ERR "Received PERSISTENT_RESERVE CDB while legacy" + " SPC-2 reservation is held, returning" + " RESERVATION_CONFLICT\n"); + return PYX_TRANSPORT_RESERVATION_CONFLICT; + } + + return (cdb[0] == PERSISTENT_RESERVE_OUT) ? + core_scsi3_emulate_pr_out(cmd, cdb) : + core_scsi3_emulate_pr_in(cmd, cdb); +} + +static int core_pt_reservation_check(struct se_cmd *cmd, u32 *pr_res_type) +{ + return 0; +} + +static int core_pt_seq_non_holder( + struct se_cmd *cmd, + unsigned char *cdb, + u32 pr_reg_type) +{ + return 0; +} + +int core_setup_reservations(struct se_device *dev, int force_pt) +{ + struct se_subsystem_dev *su_dev = dev->se_sub_dev; + struct t10_reservation_template *rest = &su_dev->t10_reservation; + /* + * If this device is from Target_Core_Mod/pSCSI, use the reservations + * of the Underlying SCSI hardware. In Linux/SCSI terms, this can + * cause a problem because libata and some SATA RAID HBAs appear + * under Linux/SCSI, but to emulate reservations themselves. + */ + if (((TRANSPORT(dev)->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) && + !(DEV_ATTRIB(dev)->emulate_reservations)) || force_pt) { + rest->res_type = SPC_PASSTHROUGH; + rest->pr_ops.t10_reservation_check = &core_pt_reservation_check; + rest->pr_ops.t10_seq_non_holder = &core_pt_seq_non_holder; + printk(KERN_INFO "%s: Using SPC_PASSTHROUGH, no reservation" + " emulation\n", TRANSPORT(dev)->name); + return 0; + } + /* + * If SPC-3 or above is reported by real or emulated struct se_device, + * use emulated Persistent Reservations. + */ + if (TRANSPORT(dev)->get_device_rev(dev) >= SCSI_3) { + rest->res_type = SPC3_PERSISTENT_RESERVATIONS; + rest->pr_ops.t10_reservation_check = &core_scsi3_pr_reservation_check; + rest->pr_ops.t10_seq_non_holder = &core_scsi3_pr_seq_non_holder; + printk(KERN_INFO "%s: Using SPC3_PERSISTENT_RESERVATIONS" + " emulation\n", TRANSPORT(dev)->name); + } else { + rest->res_type = SPC2_RESERVATIONS; + rest->pr_ops.t10_reservation_check = &core_scsi2_reservation_check; + rest->pr_ops.t10_seq_non_holder = + &core_scsi2_reservation_seq_non_holder; + printk(KERN_INFO "%s: Using SPC2_RESERVATIONS emulation\n", + TRANSPORT(dev)->name); + } + + return 0; +} diff --git a/drivers/target/target_core_pr.h b/drivers/target/target_core_pr.h new file mode 100644 index 000000000000..5603bcfd86d3 --- /dev/null +++ b/drivers/target/target_core_pr.h @@ -0,0 +1,67 @@ +#ifndef TARGET_CORE_PR_H +#define TARGET_CORE_PR_H +/* + * PERSISTENT_RESERVE_OUT service action codes + * + * spc4r17 section 6.14.2 Table 171 + */ +#define PRO_REGISTER 0x00 +#define PRO_RESERVE 0x01 +#define PRO_RELEASE 0x02 +#define PRO_CLEAR 0x03 +#define PRO_PREEMPT 0x04 +#define PRO_PREEMPT_AND_ABORT 0x05 +#define PRO_REGISTER_AND_IGNORE_EXISTING_KEY 0x06 +#define PRO_REGISTER_AND_MOVE 0x07 +/* + * PERSISTENT_RESERVE_IN service action codes + * + * spc4r17 section 6.13.1 Table 159 + */ +#define PRI_READ_KEYS 0x00 +#define PRI_READ_RESERVATION 0x01 +#define PRI_REPORT_CAPABILITIES 0x02 +#define PRI_READ_FULL_STATUS 0x03 +/* + * PERSISTENT_RESERVE_ SCOPE field + * + * spc4r17 section 6.13.3.3 Table 163 + */ +#define PR_SCOPE_LU_SCOPE 0x00 +/* + * PERSISTENT_RESERVE_* TYPE field + * + * spc4r17 section 6.13.3.4 Table 164 + */ +#define PR_TYPE_WRITE_EXCLUSIVE 0x01 +#define PR_TYPE_EXCLUSIVE_ACCESS 0x03 +#define PR_TYPE_WRITE_EXCLUSIVE_REGONLY 0x05 +#define PR_TYPE_EXCLUSIVE_ACCESS_REGONLY 0x06 +#define PR_TYPE_WRITE_EXCLUSIVE_ALLREG 0x07 +#define PR_TYPE_EXCLUSIVE_ACCESS_ALLREG 0x08 + +#define PR_APTPL_MAX_IPORT_LEN 256 +#define PR_APTPL_MAX_TPORT_LEN 256 + +extern struct kmem_cache *t10_pr_reg_cache; + +extern int core_pr_dump_initiator_port(struct t10_pr_registration *, + char *, u32); +extern int core_scsi2_emulate_crh(struct se_cmd *); +extern int core_scsi3_alloc_aptpl_registration( + struct t10_reservation_template *, u64, + unsigned char *, unsigned char *, u32, + unsigned char *, u16, u32, int, int, u8); +extern int core_scsi3_check_aptpl_registration(struct se_device *, + struct se_portal_group *, struct se_lun *, + struct se_lun_acl *); +extern void core_scsi3_free_pr_reg_from_nacl(struct se_device *, + struct se_node_acl *); +extern void core_scsi3_free_all_registrations(struct se_device *); +extern unsigned char *core_scsi3_pr_dump_type(int); +extern int core_scsi3_check_cdb_abort_and_preempt(struct list_head *, + struct se_cmd *); +extern int core_scsi3_emulate_pr(struct se_cmd *); +extern int core_setup_reservations(struct se_device *, int); + +#endif /* TARGET_CORE_PR_H */ diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c new file mode 100644 index 000000000000..742d24609a9b --- /dev/null +++ b/drivers/target/target_core_pscsi.c @@ -0,0 +1,1470 @@ +/******************************************************************************* + * Filename: target_core_pscsi.c + * + * This file contains the generic target mode <-> Linux SCSI subsystem plugin. + * + * Copyright (c) 2003, 2004, 2005 PyX Technologies, Inc. + * Copyright (c) 2005, 2006, 2007 SBE, Inc. + * Copyright (c) 2007-2010 Rising Tide Systems + * Copyright (c) 2008-2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ******************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* For TASK_ATTR_* */ + +#include +#include +#include + +#include "target_core_pscsi.h" + +#define ISPRINT(a) ((a >= ' ') && (a <= '~')) + +static struct se_subsystem_api pscsi_template; + +static void pscsi_req_done(struct request *, int); + +/* pscsi_get_sh(): + * + * + */ +static struct Scsi_Host *pscsi_get_sh(u32 host_no) +{ + struct Scsi_Host *sh = NULL; + + sh = scsi_host_lookup(host_no); + if (IS_ERR(sh)) { + printk(KERN_ERR "Unable to locate SCSI HBA with Host ID:" + " %u\n", host_no); + return NULL; + } + + return sh; +} + +/* pscsi_attach_hba(): + * + * pscsi_get_sh() used scsi_host_lookup() to locate struct Scsi_Host. + * from the passed SCSI Host ID. + */ +static int pscsi_attach_hba(struct se_hba *hba, u32 host_id) +{ + int hba_depth; + struct pscsi_hba_virt *phv; + + phv = kzalloc(sizeof(struct pscsi_hba_virt), GFP_KERNEL); + if (!(phv)) { + printk(KERN_ERR "Unable to allocate struct pscsi_hba_virt\n"); + return -1; + } + phv->phv_host_id = host_id; + phv->phv_mode = PHV_VIRUTAL_HOST_ID; + hba_depth = PSCSI_VIRTUAL_HBA_DEPTH; + atomic_set(&hba->left_queue_depth, hba_depth); + atomic_set(&hba->max_queue_depth, hba_depth); + + hba->hba_ptr = (void *)phv; + + printk(KERN_INFO "CORE_HBA[%d] - TCM SCSI HBA Driver %s on" + " Generic Target Core Stack %s\n", hba->hba_id, + PSCSI_VERSION, TARGET_CORE_MOD_VERSION); + printk(KERN_INFO "CORE_HBA[%d] - Attached SCSI HBA to Generic" + " Target Core with TCQ Depth: %d\n", hba->hba_id, + atomic_read(&hba->max_queue_depth)); + + return 0; +} + +static void pscsi_detach_hba(struct se_hba *hba) +{ + struct pscsi_hba_virt *phv = hba->hba_ptr; + struct Scsi_Host *scsi_host = phv->phv_lld_host; + + if (scsi_host) { + scsi_host_put(scsi_host); + + printk(KERN_INFO "CORE_HBA[%d] - Detached SCSI HBA: %s from" + " Generic Target Core\n", hba->hba_id, + (scsi_host->hostt->name) ? (scsi_host->hostt->name) : + "Unknown"); + } else + printk(KERN_INFO "CORE_HBA[%d] - Detached Virtual SCSI HBA" + " from Generic Target Core\n", hba->hba_id); + + kfree(phv); + hba->hba_ptr = NULL; +} + +static int pscsi_pmode_enable_hba(struct se_hba *hba, unsigned long mode_flag) +{ + struct pscsi_hba_virt *phv = (struct pscsi_hba_virt *)hba->hba_ptr; + struct Scsi_Host *sh = phv->phv_lld_host; + int hba_depth = PSCSI_VIRTUAL_HBA_DEPTH; + /* + * Release the struct Scsi_Host + */ + if (!(mode_flag)) { + if (!(sh)) + return 0; + + phv->phv_lld_host = NULL; + phv->phv_mode = PHV_VIRUTAL_HOST_ID; + atomic_set(&hba->left_queue_depth, hba_depth); + atomic_set(&hba->max_queue_depth, hba_depth); + + printk(KERN_INFO "CORE_HBA[%d] - Disabled pSCSI HBA Passthrough" + " %s\n", hba->hba_id, (sh->hostt->name) ? + (sh->hostt->name) : "Unknown"); + + scsi_host_put(sh); + return 0; + } + /* + * Otherwise, locate struct Scsi_Host from the original passed + * pSCSI Host ID and enable for phba mode + */ + sh = pscsi_get_sh(phv->phv_host_id); + if (!(sh)) { + printk(KERN_ERR "pSCSI: Unable to locate SCSI Host for" + " phv_host_id: %d\n", phv->phv_host_id); + return -1; + } + /* + * Usually the SCSI LLD will use the hostt->can_queue value to define + * its HBA TCQ depth. Some other drivers (like 2.6 megaraid) don't set + * this at all and set sh->can_queue at runtime. + */ + hba_depth = (sh->hostt->can_queue > sh->can_queue) ? + sh->hostt->can_queue : sh->can_queue; + + atomic_set(&hba->left_queue_depth, hba_depth); + atomic_set(&hba->max_queue_depth, hba_depth); + + phv->phv_lld_host = sh; + phv->phv_mode = PHV_LLD_SCSI_HOST_NO; + + printk(KERN_INFO "CORE_HBA[%d] - Enabled pSCSI HBA Passthrough %s\n", + hba->hba_id, (sh->hostt->name) ? (sh->hostt->name) : "Unknown"); + + return 1; +} + +static void pscsi_tape_read_blocksize(struct se_device *dev, + struct scsi_device *sdev) +{ + unsigned char cdb[MAX_COMMAND_SIZE], *buf; + int ret; + + buf = kzalloc(12, GFP_KERNEL); + if (!buf) + return; + + memset(cdb, 0, MAX_COMMAND_SIZE); + cdb[0] = MODE_SENSE; + cdb[4] = 0x0c; /* 12 bytes */ + + ret = scsi_execute_req(sdev, cdb, DMA_FROM_DEVICE, buf, 12, NULL, + HZ, 1, NULL); + if (ret) + goto out_free; + + /* + * If MODE_SENSE still returns zero, set the default value to 1024. + */ + sdev->sector_size = (buf[9] << 16) | (buf[10] << 8) | (buf[11]); + if (!sdev->sector_size) + sdev->sector_size = 1024; +out_free: + kfree(buf); +} + +static void +pscsi_set_inquiry_info(struct scsi_device *sdev, struct t10_wwn *wwn) +{ + unsigned char *buf; + + if (sdev->inquiry_len < INQUIRY_LEN) + return; + + buf = sdev->inquiry; + if (!buf) + return; + /* + * Use sdev->inquiry from drivers/scsi/scsi_scan.c:scsi_alloc_sdev() + */ + memcpy(&wwn->vendor[0], &buf[8], sizeof(wwn->vendor)); + memcpy(&wwn->model[0], &buf[16], sizeof(wwn->model)); + memcpy(&wwn->revision[0], &buf[32], sizeof(wwn->revision)); +} + +static int +pscsi_get_inquiry_vpd_serial(struct scsi_device *sdev, struct t10_wwn *wwn) +{ + unsigned char cdb[MAX_COMMAND_SIZE], *buf; + int ret; + + buf = kzalloc(INQUIRY_VPD_SERIAL_LEN, GFP_KERNEL); + if (!buf) + return -1; + + memset(cdb, 0, MAX_COMMAND_SIZE); + cdb[0] = INQUIRY; + cdb[1] = 0x01; /* Query VPD */ + cdb[2] = 0x80; /* Unit Serial Number */ + cdb[3] = (INQUIRY_VPD_SERIAL_LEN >> 8) & 0xff; + cdb[4] = (INQUIRY_VPD_SERIAL_LEN & 0xff); + + ret = scsi_execute_req(sdev, cdb, DMA_FROM_DEVICE, buf, + INQUIRY_VPD_SERIAL_LEN, NULL, HZ, 1, NULL); + if (ret) + goto out_free; + + snprintf(&wwn->unit_serial[0], INQUIRY_VPD_SERIAL_LEN, "%s", &buf[4]); + + wwn->t10_sub_dev->su_dev_flags |= SDF_FIRMWARE_VPD_UNIT_SERIAL; + + kfree(buf); + return 0; + +out_free: + kfree(buf); + return -1; +} + +static void +pscsi_get_inquiry_vpd_device_ident(struct scsi_device *sdev, + struct t10_wwn *wwn) +{ + unsigned char cdb[MAX_COMMAND_SIZE], *buf, *page_83; + int ident_len, page_len, off = 4, ret; + struct t10_vpd *vpd; + + buf = kzalloc(INQUIRY_VPD_SERIAL_LEN, GFP_KERNEL); + if (!buf) + return; + + memset(cdb, 0, MAX_COMMAND_SIZE); + cdb[0] = INQUIRY; + cdb[1] = 0x01; /* Query VPD */ + cdb[2] = 0x83; /* Device Identifier */ + cdb[3] = (INQUIRY_VPD_DEVICE_IDENTIFIER_LEN >> 8) & 0xff; + cdb[4] = (INQUIRY_VPD_DEVICE_IDENTIFIER_LEN & 0xff); + + ret = scsi_execute_req(sdev, cdb, DMA_FROM_DEVICE, buf, + INQUIRY_VPD_DEVICE_IDENTIFIER_LEN, + NULL, HZ, 1, NULL); + if (ret) + goto out; + + page_len = (buf[2] << 8) | buf[3]; + while (page_len > 0) { + /* Grab a pointer to the Identification descriptor */ + page_83 = &buf[off]; + ident_len = page_83[3]; + if (!ident_len) { + printk(KERN_ERR "page_83[3]: identifier" + " length zero!\n"); + break; + } + printk(KERN_INFO "T10 VPD Identifer Length: %d\n", ident_len); + + vpd = kzalloc(sizeof(struct t10_vpd), GFP_KERNEL); + if (!vpd) { + printk(KERN_ERR "Unable to allocate memory for" + " struct t10_vpd\n"); + goto out; + } + INIT_LIST_HEAD(&vpd->vpd_list); + + transport_set_vpd_proto_id(vpd, page_83); + transport_set_vpd_assoc(vpd, page_83); + + if (transport_set_vpd_ident_type(vpd, page_83) < 0) { + off += (ident_len + 4); + page_len -= (ident_len + 4); + kfree(vpd); + continue; + } + if (transport_set_vpd_ident(vpd, page_83) < 0) { + off += (ident_len + 4); + page_len -= (ident_len + 4); + kfree(vpd); + continue; + } + + list_add_tail(&vpd->vpd_list, &wwn->t10_vpd_list); + off += (ident_len + 4); + page_len -= (ident_len + 4); + } + +out: + kfree(buf); +} + +/* pscsi_add_device_to_list(): + * + * + */ +static struct se_device *pscsi_add_device_to_list( + struct se_hba *hba, + struct se_subsystem_dev *se_dev, + struct pscsi_dev_virt *pdv, + struct scsi_device *sd, + int dev_flags) +{ + struct se_device *dev; + struct se_dev_limits dev_limits; + struct request_queue *q; + struct queue_limits *limits; + + memset(&dev_limits, 0, sizeof(struct se_dev_limits)); + + if (!sd->queue_depth) { + sd->queue_depth = PSCSI_DEFAULT_QUEUEDEPTH; + + printk(KERN_ERR "Set broken SCSI Device %d:%d:%d" + " queue_depth to %d\n", sd->channel, sd->id, + sd->lun, sd->queue_depth); + } + /* + * Setup the local scope queue_limits from struct request_queue->limits + * to pass into transport_add_device_to_core_hba() as struct se_dev_limits. + */ + q = sd->request_queue; + limits = &dev_limits.limits; + limits->logical_block_size = sd->sector_size; + limits->max_hw_sectors = (sd->host->max_sectors > queue_max_hw_sectors(q)) ? + queue_max_hw_sectors(q) : sd->host->max_sectors; + limits->max_sectors = (sd->host->max_sectors > queue_max_sectors(q)) ? + queue_max_sectors(q) : sd->host->max_sectors; + dev_limits.hw_queue_depth = sd->queue_depth; + dev_limits.queue_depth = sd->queue_depth; + /* + * Setup our standard INQUIRY info into se_dev->t10_wwn + */ + pscsi_set_inquiry_info(sd, &se_dev->t10_wwn); + + /* + * Set the pointer pdv->pdv_sd to from passed struct scsi_device, + * which has already been referenced with Linux SCSI code with + * scsi_device_get() in this file's pscsi_create_virtdevice(). + * + * The passthrough operations called by the transport_add_device_* + * function below will require this pointer to be set for passthroug + * ops. + * + * For the shutdown case in pscsi_free_device(), this struct + * scsi_device reference is released with Linux SCSI code + * scsi_device_put() and the pdv->pdv_sd cleared. + */ + pdv->pdv_sd = sd; + + dev = transport_add_device_to_core_hba(hba, &pscsi_template, + se_dev, dev_flags, (void *)pdv, + &dev_limits, NULL, NULL); + if (!(dev)) { + pdv->pdv_sd = NULL; + return NULL; + } + + /* + * Locate VPD WWN Information used for various purposes within + * the Storage Engine. + */ + if (!pscsi_get_inquiry_vpd_serial(sd, &se_dev->t10_wwn)) { + /* + * If VPD Unit Serial returned GOOD status, try + * VPD Device Identification page (0x83). + */ + pscsi_get_inquiry_vpd_device_ident(sd, &se_dev->t10_wwn); + } + + /* + * For TYPE_TAPE, attempt to determine blocksize with MODE_SENSE. + */ + if (sd->type == TYPE_TAPE) + pscsi_tape_read_blocksize(dev, sd); + return dev; +} + +static void *pscsi_allocate_virtdevice(struct se_hba *hba, const char *name) +{ + struct pscsi_dev_virt *pdv; + + pdv = kzalloc(sizeof(struct pscsi_dev_virt), GFP_KERNEL); + if (!(pdv)) { + printk(KERN_ERR "Unable to allocate memory for struct pscsi_dev_virt\n"); + return NULL; + } + pdv->pdv_se_hba = hba; + + printk(KERN_INFO "PSCSI: Allocated pdv: %p for %s\n", pdv, name); + return (void *)pdv; +} + +/* + * Called with struct Scsi_Host->host_lock called. + */ +static struct se_device *pscsi_create_type_disk( + struct scsi_device *sd, + struct pscsi_dev_virt *pdv, + struct se_subsystem_dev *se_dev, + struct se_hba *hba) +{ + struct se_device *dev; + struct pscsi_hba_virt *phv = (struct pscsi_hba_virt *)pdv->pdv_se_hba->hba_ptr; + struct Scsi_Host *sh = sd->host; + struct block_device *bd; + u32 dev_flags = 0; + + if (scsi_device_get(sd)) { + printk(KERN_ERR "scsi_device_get() failed for %d:%d:%d:%d\n", + sh->host_no, sd->channel, sd->id, sd->lun); + spin_unlock_irq(sh->host_lock); + return NULL; + } + spin_unlock_irq(sh->host_lock); + /* + * Claim exclusive struct block_device access to struct scsi_device + * for TYPE_DISK using supplied udev_path + */ + bd = blkdev_get_by_path(se_dev->se_dev_udev_path, + FMODE_WRITE|FMODE_READ|FMODE_EXCL, pdv); + if (!(bd)) { + printk("pSCSI: blkdev_get_by_path() failed\n"); + scsi_device_put(sd); + return NULL; + } + pdv->pdv_bd = bd; + + dev = pscsi_add_device_to_list(hba, se_dev, pdv, sd, dev_flags); + if (!(dev)) { + blkdev_put(pdv->pdv_bd, FMODE_WRITE|FMODE_READ|FMODE_EXCL); + scsi_device_put(sd); + return NULL; + } + printk(KERN_INFO "CORE_PSCSI[%d] - Added TYPE_DISK for %d:%d:%d:%d\n", + phv->phv_host_id, sh->host_no, sd->channel, sd->id, sd->lun); + + return dev; +} + +/* + * Called with struct Scsi_Host->host_lock called. + */ +static struct se_device *pscsi_create_type_rom( + struct scsi_device *sd, + struct pscsi_dev_virt *pdv, + struct se_subsystem_dev *se_dev, + struct se_hba *hba) +{ + struct se_device *dev; + struct pscsi_hba_virt *phv = (struct pscsi_hba_virt *)pdv->pdv_se_hba->hba_ptr; + struct Scsi_Host *sh = sd->host; + u32 dev_flags = 0; + + if (scsi_device_get(sd)) { + printk(KERN_ERR "scsi_device_get() failed for %d:%d:%d:%d\n", + sh->host_no, sd->channel, sd->id, sd->lun); + spin_unlock_irq(sh->host_lock); + return NULL; + } + spin_unlock_irq(sh->host_lock); + + dev = pscsi_add_device_to_list(hba, se_dev, pdv, sd, dev_flags); + if (!(dev)) { + scsi_device_put(sd); + return NULL; + } + printk(KERN_INFO "CORE_PSCSI[%d] - Added Type: %s for %d:%d:%d:%d\n", + phv->phv_host_id, scsi_device_type(sd->type), sh->host_no, + sd->channel, sd->id, sd->lun); + + return dev; +} + +/* + *Called with struct Scsi_Host->host_lock called. + */ +static struct se_device *pscsi_create_type_other( + struct scsi_device *sd, + struct pscsi_dev_virt *pdv, + struct se_subsystem_dev *se_dev, + struct se_hba *hba) +{ + struct se_device *dev; + struct pscsi_hba_virt *phv = (struct pscsi_hba_virt *)pdv->pdv_se_hba->hba_ptr; + struct Scsi_Host *sh = sd->host; + u32 dev_flags = 0; + + spin_unlock_irq(sh->host_lock); + dev = pscsi_add_device_to_list(hba, se_dev, pdv, sd, dev_flags); + if (!(dev)) + return NULL; + + printk(KERN_INFO "CORE_PSCSI[%d] - Added Type: %s for %d:%d:%d:%d\n", + phv->phv_host_id, scsi_device_type(sd->type), sh->host_no, + sd->channel, sd->id, sd->lun); + + return dev; +} + +static struct se_device *pscsi_create_virtdevice( + struct se_hba *hba, + struct se_subsystem_dev *se_dev, + void *p) +{ + struct pscsi_dev_virt *pdv = (struct pscsi_dev_virt *)p; + struct se_device *dev; + struct scsi_device *sd; + struct pscsi_hba_virt *phv = (struct pscsi_hba_virt *)hba->hba_ptr; + struct Scsi_Host *sh = phv->phv_lld_host; + int legacy_mode_enable = 0; + + if (!(pdv)) { + printk(KERN_ERR "Unable to locate struct pscsi_dev_virt" + " parameter\n"); + return NULL; + } + /* + * If not running in PHV_LLD_SCSI_HOST_NO mode, locate the + * struct Scsi_Host we will need to bring the TCM/pSCSI object online + */ + if (!(sh)) { + if (phv->phv_mode == PHV_LLD_SCSI_HOST_NO) { + printk(KERN_ERR "pSCSI: Unable to locate struct" + " Scsi_Host for PHV_LLD_SCSI_HOST_NO\n"); + return NULL; + } + /* + * For the newer PHV_VIRUTAL_HOST_ID struct scsi_device + * reference, we enforce that udev_path has been set + */ + if (!(se_dev->su_dev_flags & SDF_USING_UDEV_PATH)) { + printk(KERN_ERR "pSCSI: udev_path attribute has not" + " been set before ENABLE=1\n"); + return NULL; + } + /* + * If no scsi_host_id= was passed for PHV_VIRUTAL_HOST_ID, + * use the original TCM hba ID to reference Linux/SCSI Host No + * and enable for PHV_LLD_SCSI_HOST_NO mode. + */ + if (!(pdv->pdv_flags & PDF_HAS_VIRT_HOST_ID)) { + spin_lock(&hba->device_lock); + if (!(list_empty(&hba->hba_dev_list))) { + printk(KERN_ERR "pSCSI: Unable to set hba_mode" + " with active devices\n"); + spin_unlock(&hba->device_lock); + return NULL; + } + spin_unlock(&hba->device_lock); + + if (pscsi_pmode_enable_hba(hba, 1) != 1) + return NULL; + + legacy_mode_enable = 1; + hba->hba_flags |= HBA_FLAGS_PSCSI_MODE; + sh = phv->phv_lld_host; + } else { + sh = pscsi_get_sh(pdv->pdv_host_id); + if (!(sh)) { + printk(KERN_ERR "pSCSI: Unable to locate" + " pdv_host_id: %d\n", pdv->pdv_host_id); + return NULL; + } + } + } else { + if (phv->phv_mode == PHV_VIRUTAL_HOST_ID) { + printk(KERN_ERR "pSCSI: PHV_VIRUTAL_HOST_ID set while" + " struct Scsi_Host exists\n"); + return NULL; + } + } + + spin_lock_irq(sh->host_lock); + list_for_each_entry(sd, &sh->__devices, siblings) { + if ((pdv->pdv_channel_id != sd->channel) || + (pdv->pdv_target_id != sd->id) || + (pdv->pdv_lun_id != sd->lun)) + continue; + /* + * Functions will release the held struct scsi_host->host_lock + * before calling calling pscsi_add_device_to_list() to register + * struct scsi_device with target_core_mod. + */ + switch (sd->type) { + case TYPE_DISK: + dev = pscsi_create_type_disk(sd, pdv, se_dev, hba); + break; + case TYPE_ROM: + dev = pscsi_create_type_rom(sd, pdv, se_dev, hba); + break; + default: + dev = pscsi_create_type_other(sd, pdv, se_dev, hba); + break; + } + + if (!(dev)) { + if (phv->phv_mode == PHV_VIRUTAL_HOST_ID) + scsi_host_put(sh); + else if (legacy_mode_enable) { + pscsi_pmode_enable_hba(hba, 0); + hba->hba_flags &= ~HBA_FLAGS_PSCSI_MODE; + } + pdv->pdv_sd = NULL; + return NULL; + } + return dev; + } + spin_unlock_irq(sh->host_lock); + + printk(KERN_ERR "pSCSI: Unable to locate %d:%d:%d:%d\n", sh->host_no, + pdv->pdv_channel_id, pdv->pdv_target_id, pdv->pdv_lun_id); + + if (phv->phv_mode == PHV_VIRUTAL_HOST_ID) + scsi_host_put(sh); + else if (legacy_mode_enable) { + pscsi_pmode_enable_hba(hba, 0); + hba->hba_flags &= ~HBA_FLAGS_PSCSI_MODE; + } + + return NULL; +} + +/* pscsi_free_device(): (Part of se_subsystem_api_t template) + * + * + */ +static void pscsi_free_device(void *p) +{ + struct pscsi_dev_virt *pdv = p; + struct pscsi_hba_virt *phv = pdv->pdv_se_hba->hba_ptr; + struct scsi_device *sd = pdv->pdv_sd; + + if (sd) { + /* + * Release exclusive pSCSI internal struct block_device claim for + * struct scsi_device with TYPE_DISK from pscsi_create_type_disk() + */ + if ((sd->type == TYPE_DISK) && pdv->pdv_bd) { + blkdev_put(pdv->pdv_bd, + FMODE_WRITE|FMODE_READ|FMODE_EXCL); + pdv->pdv_bd = NULL; + } + /* + * For HBA mode PHV_LLD_SCSI_HOST_NO, release the reference + * to struct Scsi_Host now. + */ + if ((phv->phv_mode == PHV_LLD_SCSI_HOST_NO) && + (phv->phv_lld_host != NULL)) + scsi_host_put(phv->phv_lld_host); + + if ((sd->type == TYPE_DISK) || (sd->type == TYPE_ROM)) + scsi_device_put(sd); + + pdv->pdv_sd = NULL; + } + + kfree(pdv); +} + +static inline struct pscsi_plugin_task *PSCSI_TASK(struct se_task *task) +{ + return container_of(task, struct pscsi_plugin_task, pscsi_task); +} + + +/* pscsi_transport_complete(): + * + * + */ +static int pscsi_transport_complete(struct se_task *task) +{ + struct pscsi_dev_virt *pdv = task->se_dev->dev_ptr; + struct scsi_device *sd = pdv->pdv_sd; + int result; + struct pscsi_plugin_task *pt = PSCSI_TASK(task); + unsigned char *cdb = &pt->pscsi_cdb[0]; + + result = pt->pscsi_result; + /* + * Hack to make sure that Write-Protect modepage is set if R/O mode is + * forced. + */ + if (((cdb[0] == MODE_SENSE) || (cdb[0] == MODE_SENSE_10)) && + (status_byte(result) << 1) == SAM_STAT_GOOD) { + if (!TASK_CMD(task)->se_deve) + goto after_mode_sense; + + if (TASK_CMD(task)->se_deve->lun_flags & + TRANSPORT_LUNFLAGS_READ_ONLY) { + unsigned char *buf = (unsigned char *) + T_TASK(task->task_se_cmd)->t_task_buf; + + if (cdb[0] == MODE_SENSE_10) { + if (!(buf[3] & 0x80)) + buf[3] |= 0x80; + } else { + if (!(buf[2] & 0x80)) + buf[2] |= 0x80; + } + } + } +after_mode_sense: + + if (sd->type != TYPE_TAPE) + goto after_mode_select; + + /* + * Hack to correctly obtain the initiator requested blocksize for + * TYPE_TAPE. Since this value is dependent upon each tape media, + * struct scsi_device->sector_size will not contain the correct value + * by default, so we go ahead and set it so + * TRANSPORT(dev)->get_blockdev() returns the correct value to the + * storage engine. + */ + if (((cdb[0] == MODE_SELECT) || (cdb[0] == MODE_SELECT_10)) && + (status_byte(result) << 1) == SAM_STAT_GOOD) { + unsigned char *buf; + struct scatterlist *sg = task->task_sg; + u16 bdl; + u32 blocksize; + + buf = sg_virt(&sg[0]); + if (!(buf)) { + printk(KERN_ERR "Unable to get buf for scatterlist\n"); + goto after_mode_select; + } + + if (cdb[0] == MODE_SELECT) + bdl = (buf[3]); + else + bdl = (buf[6] << 8) | (buf[7]); + + if (!bdl) + goto after_mode_select; + + if (cdb[0] == MODE_SELECT) + blocksize = (buf[9] << 16) | (buf[10] << 8) | + (buf[11]); + else + blocksize = (buf[13] << 16) | (buf[14] << 8) | + (buf[15]); + + sd->sector_size = blocksize; + } +after_mode_select: + + if (status_byte(result) & CHECK_CONDITION) + return 1; + + return 0; +} + +static struct se_task * +pscsi_alloc_task(struct se_cmd *cmd) +{ + struct pscsi_plugin_task *pt; + unsigned char *cdb = T_TASK(cmd)->t_task_cdb; + + pt = kzalloc(sizeof(struct pscsi_plugin_task), GFP_KERNEL); + if (!pt) { + printk(KERN_ERR "Unable to allocate struct pscsi_plugin_task\n"); + return NULL; + } + + /* + * If TCM Core is signaling a > TCM_MAX_COMMAND_SIZE allocation, + * allocate the extended CDB buffer for per struct se_task context + * pt->pscsi_cdb now. + */ + if (T_TASK(cmd)->t_task_cdb != T_TASK(cmd)->__t_task_cdb) { + + pt->pscsi_cdb = kzalloc(scsi_command_size(cdb), GFP_KERNEL); + if (!(pt->pscsi_cdb)) { + printk(KERN_ERR "pSCSI: Unable to allocate extended" + " pt->pscsi_cdb\n"); + return NULL; + } + } else + pt->pscsi_cdb = &pt->__pscsi_cdb[0]; + + return &pt->pscsi_task; +} + +static inline void pscsi_blk_init_request( + struct se_task *task, + struct pscsi_plugin_task *pt, + struct request *req, + int bidi_read) +{ + /* + * Defined as "scsi command" in include/linux/blkdev.h. + */ + req->cmd_type = REQ_TYPE_BLOCK_PC; + /* + * For the extra BIDI-COMMAND READ struct request we do not + * need to setup the remaining structure members + */ + if (bidi_read) + return; + /* + * Setup the done function pointer for struct request, + * also set the end_io_data pointer.to struct se_task. + */ + req->end_io = pscsi_req_done; + req->end_io_data = (void *)task; + /* + * Load the referenced struct se_task's SCSI CDB into + * include/linux/blkdev.h:struct request->cmd + */ + req->cmd_len = scsi_command_size(pt->pscsi_cdb); + req->cmd = &pt->pscsi_cdb[0]; + /* + * Setup pointer for outgoing sense data. + */ + req->sense = (void *)&pt->pscsi_sense[0]; + req->sense_len = 0; +} + +/* + * Used for pSCSI data payloads for all *NON* SCF_SCSI_DATA_SG_IO_CDB +*/ +static int pscsi_blk_get_request(struct se_task *task) +{ + struct pscsi_plugin_task *pt = PSCSI_TASK(task); + struct pscsi_dev_virt *pdv = task->se_dev->dev_ptr; + + pt->pscsi_req = blk_get_request(pdv->pdv_sd->request_queue, + (task->task_data_direction == DMA_TO_DEVICE), + GFP_KERNEL); + if (!(pt->pscsi_req) || IS_ERR(pt->pscsi_req)) { + printk(KERN_ERR "PSCSI: blk_get_request() failed: %ld\n", + IS_ERR(pt->pscsi_req)); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + /* + * Setup the newly allocated struct request for REQ_TYPE_BLOCK_PC, + * and setup rq callback, CDB and sense. + */ + pscsi_blk_init_request(task, pt, pt->pscsi_req, 0); + return 0; +} + +/* pscsi_do_task(): (Part of se_subsystem_api_t template) + * + * + */ +static int pscsi_do_task(struct se_task *task) +{ + struct pscsi_plugin_task *pt = PSCSI_TASK(task); + struct pscsi_dev_virt *pdv = task->se_dev->dev_ptr; + /* + * Set the struct request->timeout value based on peripheral + * device type from SCSI. + */ + if (pdv->pdv_sd->type == TYPE_DISK) + pt->pscsi_req->timeout = PS_TIMEOUT_DISK; + else + pt->pscsi_req->timeout = PS_TIMEOUT_OTHER; + + pt->pscsi_req->retries = PS_RETRY; + /* + * Queue the struct request into the struct scsi_device->request_queue. + * Also check for HEAD_OF_QUEUE SAM TASK attr from received se_cmd + * descriptor + */ + blk_execute_rq_nowait(pdv->pdv_sd->request_queue, NULL, pt->pscsi_req, + (task->task_se_cmd->sam_task_attr == TASK_ATTR_HOQ), + pscsi_req_done); + + return PYX_TRANSPORT_SENT_TO_TRANSPORT; +} + +static void pscsi_free_task(struct se_task *task) +{ + struct pscsi_plugin_task *pt = PSCSI_TASK(task); + struct se_cmd *cmd = task->task_se_cmd; + + /* + * Release the extended CDB allocation from pscsi_alloc_task() + * if one exists. + */ + if (T_TASK(cmd)->t_task_cdb != T_TASK(cmd)->__t_task_cdb) + kfree(pt->pscsi_cdb); + /* + * We do not release the bio(s) here associated with this task, as + * this is handled by bio_put() and pscsi_bi_endio(). + */ + kfree(pt); +} + +enum { + Opt_scsi_host_id, Opt_scsi_channel_id, Opt_scsi_target_id, + Opt_scsi_lun_id, Opt_err +}; + +static match_table_t tokens = { + {Opt_scsi_host_id, "scsi_host_id=%d"}, + {Opt_scsi_channel_id, "scsi_channel_id=%d"}, + {Opt_scsi_target_id, "scsi_target_id=%d"}, + {Opt_scsi_lun_id, "scsi_lun_id=%d"}, + {Opt_err, NULL} +}; + +static ssize_t pscsi_set_configfs_dev_params(struct se_hba *hba, + struct se_subsystem_dev *se_dev, + const char *page, + ssize_t count) +{ + struct pscsi_dev_virt *pdv = se_dev->se_dev_su_ptr; + struct pscsi_hba_virt *phv = hba->hba_ptr; + char *orig, *ptr, *opts; + substring_t args[MAX_OPT_ARGS]; + int ret = 0, arg, token; + + opts = kstrdup(page, GFP_KERNEL); + if (!opts) + return -ENOMEM; + + orig = opts; + + while ((ptr = strsep(&opts, ",")) != NULL) { + if (!*ptr) + continue; + + token = match_token(ptr, tokens, args); + switch (token) { + case Opt_scsi_host_id: + if (phv->phv_mode == PHV_LLD_SCSI_HOST_NO) { + printk(KERN_ERR "PSCSI[%d]: Unable to accept" + " scsi_host_id while phv_mode ==" + " PHV_LLD_SCSI_HOST_NO\n", + phv->phv_host_id); + ret = -EINVAL; + goto out; + } + match_int(args, &arg); + pdv->pdv_host_id = arg; + printk(KERN_INFO "PSCSI[%d]: Referencing SCSI Host ID:" + " %d\n", phv->phv_host_id, pdv->pdv_host_id); + pdv->pdv_flags |= PDF_HAS_VIRT_HOST_ID; + break; + case Opt_scsi_channel_id: + match_int(args, &arg); + pdv->pdv_channel_id = arg; + printk(KERN_INFO "PSCSI[%d]: Referencing SCSI Channel" + " ID: %d\n", phv->phv_host_id, + pdv->pdv_channel_id); + pdv->pdv_flags |= PDF_HAS_CHANNEL_ID; + break; + case Opt_scsi_target_id: + match_int(args, &arg); + pdv->pdv_target_id = arg; + printk(KERN_INFO "PSCSI[%d]: Referencing SCSI Target" + " ID: %d\n", phv->phv_host_id, + pdv->pdv_target_id); + pdv->pdv_flags |= PDF_HAS_TARGET_ID; + break; + case Opt_scsi_lun_id: + match_int(args, &arg); + pdv->pdv_lun_id = arg; + printk(KERN_INFO "PSCSI[%d]: Referencing SCSI LUN ID:" + " %d\n", phv->phv_host_id, pdv->pdv_lun_id); + pdv->pdv_flags |= PDF_HAS_LUN_ID; + break; + default: + break; + } + } + +out: + kfree(orig); + return (!ret) ? count : ret; +} + +static ssize_t pscsi_check_configfs_dev_params( + struct se_hba *hba, + struct se_subsystem_dev *se_dev) +{ + struct pscsi_dev_virt *pdv = se_dev->se_dev_su_ptr; + + if (!(pdv->pdv_flags & PDF_HAS_CHANNEL_ID) || + !(pdv->pdv_flags & PDF_HAS_TARGET_ID) || + !(pdv->pdv_flags & PDF_HAS_LUN_ID)) { + printk(KERN_ERR "Missing scsi_channel_id=, scsi_target_id= and" + " scsi_lun_id= parameters\n"); + return -1; + } + + return 0; +} + +static ssize_t pscsi_show_configfs_dev_params(struct se_hba *hba, + struct se_subsystem_dev *se_dev, + char *b) +{ + struct pscsi_hba_virt *phv = hba->hba_ptr; + struct pscsi_dev_virt *pdv = se_dev->se_dev_su_ptr; + struct scsi_device *sd = pdv->pdv_sd; + unsigned char host_id[16]; + ssize_t bl; + int i; + + if (phv->phv_mode == PHV_VIRUTAL_HOST_ID) + snprintf(host_id, 16, "%d", pdv->pdv_host_id); + else + snprintf(host_id, 16, "PHBA Mode"); + + bl = sprintf(b, "SCSI Device Bus Location:" + " Channel ID: %d Target ID: %d LUN: %d Host ID: %s\n", + pdv->pdv_channel_id, pdv->pdv_target_id, pdv->pdv_lun_id, + host_id); + + if (sd) { + bl += sprintf(b + bl, " "); + bl += sprintf(b + bl, "Vendor: "); + for (i = 0; i < 8; i++) { + if (ISPRINT(sd->vendor[i])) /* printable character? */ + bl += sprintf(b + bl, "%c", sd->vendor[i]); + else + bl += sprintf(b + bl, " "); + } + bl += sprintf(b + bl, " Model: "); + for (i = 0; i < 16; i++) { + if (ISPRINT(sd->model[i])) /* printable character ? */ + bl += sprintf(b + bl, "%c", sd->model[i]); + else + bl += sprintf(b + bl, " "); + } + bl += sprintf(b + bl, " Rev: "); + for (i = 0; i < 4; i++) { + if (ISPRINT(sd->rev[i])) /* printable character ? */ + bl += sprintf(b + bl, "%c", sd->rev[i]); + else + bl += sprintf(b + bl, " "); + } + bl += sprintf(b + bl, "\n"); + } + return bl; +} + +static void pscsi_bi_endio(struct bio *bio, int error) +{ + bio_put(bio); +} + +static inline struct bio *pscsi_get_bio(struct pscsi_dev_virt *pdv, int sg_num) +{ + struct bio *bio; + /* + * Use bio_malloc() following the comment in for bio -> struct request + * in block/blk-core.c:blk_make_request() + */ + bio = bio_kmalloc(GFP_KERNEL, sg_num); + if (!(bio)) { + printk(KERN_ERR "PSCSI: bio_kmalloc() failed\n"); + return NULL; + } + bio->bi_end_io = pscsi_bi_endio; + + return bio; +} + +#if 0 +#define DEBUG_PSCSI(x...) printk(x) +#else +#define DEBUG_PSCSI(x...) +#endif + +static int __pscsi_map_task_SG( + struct se_task *task, + struct scatterlist *task_sg, + u32 task_sg_num, + int bidi_read) +{ + struct pscsi_plugin_task *pt = PSCSI_TASK(task); + struct pscsi_dev_virt *pdv = task->se_dev->dev_ptr; + struct bio *bio = NULL, *hbio = NULL, *tbio = NULL; + struct page *page; + struct scatterlist *sg; + u32 data_len = task->task_size, i, len, bytes, off; + int nr_pages = (task->task_size + task_sg[0].offset + + PAGE_SIZE - 1) >> PAGE_SHIFT; + int nr_vecs = 0, rc, ret = PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + int rw = (task->task_data_direction == DMA_TO_DEVICE); + + if (!task->task_size) + return 0; + /* + * For SCF_SCSI_DATA_SG_IO_CDB, Use fs/bio.c:bio_add_page() to setup + * the bio_vec maplist from TC< struct se_mem -> task->task_sg -> + * struct scatterlist memory. The struct se_task->task_sg[] currently needs + * to be attached to struct bios for submission to Linux/SCSI using + * struct request to struct scsi_device->request_queue. + * + * Note that this will be changing post v2.6.28 as Target_Core_Mod/pSCSI + * is ported to upstream SCSI passthrough functionality that accepts + * struct scatterlist->page_link or struct page as a paraemeter. + */ + DEBUG_PSCSI("PSCSI: nr_pages: %d\n", nr_pages); + + for_each_sg(task_sg, sg, task_sg_num, i) { + page = sg_page(sg); + off = sg->offset; + len = sg->length; + + DEBUG_PSCSI("PSCSI: i: %d page: %p len: %d off: %d\n", i, + page, len, off); + + while (len > 0 && data_len > 0) { + bytes = min_t(unsigned int, len, PAGE_SIZE - off); + bytes = min(bytes, data_len); + + if (!(bio)) { + nr_vecs = min_t(int, BIO_MAX_PAGES, nr_pages); + nr_pages -= nr_vecs; + /* + * Calls bio_kmalloc() and sets bio->bi_end_io() + */ + bio = pscsi_get_bio(pdv, nr_vecs); + if (!(bio)) + goto fail; + + if (rw) + bio->bi_rw |= REQ_WRITE; + + DEBUG_PSCSI("PSCSI: Allocated bio: %p," + " dir: %s nr_vecs: %d\n", bio, + (rw) ? "rw" : "r", nr_vecs); + /* + * Set *hbio pointer to handle the case: + * nr_pages > BIO_MAX_PAGES, where additional + * bios need to be added to complete a given + * struct se_task + */ + if (!hbio) + hbio = tbio = bio; + else + tbio = tbio->bi_next = bio; + } + + DEBUG_PSCSI("PSCSI: Calling bio_add_pc_page() i: %d" + " bio: %p page: %p len: %d off: %d\n", i, bio, + page, len, off); + + rc = bio_add_pc_page(pdv->pdv_sd->request_queue, + bio, page, bytes, off); + if (rc != bytes) + goto fail; + + DEBUG_PSCSI("PSCSI: bio->bi_vcnt: %d nr_vecs: %d\n", + bio->bi_vcnt, nr_vecs); + + if (bio->bi_vcnt > nr_vecs) { + DEBUG_PSCSI("PSCSI: Reached bio->bi_vcnt max:" + " %d i: %d bio: %p, allocating another" + " bio\n", bio->bi_vcnt, i, bio); + /* + * Clear the pointer so that another bio will + * be allocated with pscsi_get_bio() above, the + * current bio has already been set *tbio and + * bio->bi_next. + */ + bio = NULL; + } + + page++; + len -= bytes; + data_len -= bytes; + off = 0; + } + } + /* + * Setup the primary pt->pscsi_req used for non BIDI and BIDI-COMMAND + * primary SCSI WRITE poayload mapped for struct se_task->task_sg[] + */ + if (!(bidi_read)) { + /* + * Starting with v2.6.31, call blk_make_request() passing in *hbio to + * allocate the pSCSI task a struct request. + */ + pt->pscsi_req = blk_make_request(pdv->pdv_sd->request_queue, + hbio, GFP_KERNEL); + if (!(pt->pscsi_req)) { + printk(KERN_ERR "pSCSI: blk_make_request() failed\n"); + goto fail; + } + /* + * Setup the newly allocated struct request for REQ_TYPE_BLOCK_PC, + * and setup rq callback, CDB and sense. + */ + pscsi_blk_init_request(task, pt, pt->pscsi_req, 0); + + return task->task_sg_num; + } + /* + * Setup the secondary pt->pscsi_req->next_rq used for the extra BIDI-COMMAND + * SCSI READ paylaod mapped for struct se_task->task_sg_bidi[] + */ + pt->pscsi_req->next_rq = blk_make_request(pdv->pdv_sd->request_queue, + hbio, GFP_KERNEL); + if (!(pt->pscsi_req->next_rq)) { + printk(KERN_ERR "pSCSI: blk_make_request() failed for BIDI\n"); + goto fail; + } + pscsi_blk_init_request(task, pt, pt->pscsi_req->next_rq, 1); + + return task->task_sg_num; +fail: + while (hbio) { + bio = hbio; + hbio = hbio->bi_next; + bio->bi_next = NULL; + bio_endio(bio, 0); + } + return ret; +} + +static int pscsi_map_task_SG(struct se_task *task) +{ + int ret; + + /* + * Setup the main struct request for the task->task_sg[] payload + */ + + ret = __pscsi_map_task_SG(task, task->task_sg, task->task_sg_num, 0); + if (ret >= 0 && task->task_sg_bidi) { + /* + * If present, set up the extra BIDI-COMMAND SCSI READ + * struct request and payload. + */ + ret = __pscsi_map_task_SG(task, task->task_sg_bidi, + task->task_sg_num, 1); + } + + if (ret < 0) + return PYX_TRANSPORT_LU_COMM_FAILURE; + return 0; +} + +/* pscsi_map_task_non_SG(): + * + * + */ +static int pscsi_map_task_non_SG(struct se_task *task) +{ + struct se_cmd *cmd = TASK_CMD(task); + struct pscsi_plugin_task *pt = PSCSI_TASK(task); + struct pscsi_dev_virt *pdv = task->se_dev->dev_ptr; + int ret = 0; + + if (pscsi_blk_get_request(task) < 0) + return PYX_TRANSPORT_LU_COMM_FAILURE; + + if (!task->task_size) + return 0; + + ret = blk_rq_map_kern(pdv->pdv_sd->request_queue, + pt->pscsi_req, T_TASK(cmd)->t_task_buf, + task->task_size, GFP_KERNEL); + if (ret < 0) { + printk(KERN_ERR "PSCSI: blk_rq_map_kern() failed: %d\n", ret); + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + return 0; +} + +static int pscsi_CDB_none(struct se_task *task) +{ + return pscsi_blk_get_request(task); +} + +/* pscsi_get_cdb(): + * + * + */ +static unsigned char *pscsi_get_cdb(struct se_task *task) +{ + struct pscsi_plugin_task *pt = PSCSI_TASK(task); + + return pt->pscsi_cdb; +} + +/* pscsi_get_sense_buffer(): + * + * + */ +static unsigned char *pscsi_get_sense_buffer(struct se_task *task) +{ + struct pscsi_plugin_task *pt = PSCSI_TASK(task); + + return (unsigned char *)&pt->pscsi_sense[0]; +} + +/* pscsi_get_device_rev(): + * + * + */ +static u32 pscsi_get_device_rev(struct se_device *dev) +{ + struct pscsi_dev_virt *pdv = dev->dev_ptr; + struct scsi_device *sd = pdv->pdv_sd; + + return (sd->scsi_level - 1) ? sd->scsi_level - 1 : 1; +} + +/* pscsi_get_device_type(): + * + * + */ +static u32 pscsi_get_device_type(struct se_device *dev) +{ + struct pscsi_dev_virt *pdv = dev->dev_ptr; + struct scsi_device *sd = pdv->pdv_sd; + + return sd->type; +} + +static sector_t pscsi_get_blocks(struct se_device *dev) +{ + struct pscsi_dev_virt *pdv = dev->dev_ptr; + + if (pdv->pdv_bd && pdv->pdv_bd->bd_part) + return pdv->pdv_bd->bd_part->nr_sects; + + dump_stack(); + return 0; +} + +/* pscsi_handle_SAM_STATUS_failures(): + * + * + */ +static inline void pscsi_process_SAM_status( + struct se_task *task, + struct pscsi_plugin_task *pt) +{ + task->task_scsi_status = status_byte(pt->pscsi_result); + if ((task->task_scsi_status)) { + task->task_scsi_status <<= 1; + printk(KERN_INFO "PSCSI Status Byte exception at task: %p CDB:" + " 0x%02x Result: 0x%08x\n", task, pt->pscsi_cdb[0], + pt->pscsi_result); + } + + switch (host_byte(pt->pscsi_result)) { + case DID_OK: + transport_complete_task(task, (!task->task_scsi_status)); + break; + default: + printk(KERN_INFO "PSCSI Host Byte exception at task: %p CDB:" + " 0x%02x Result: 0x%08x\n", task, pt->pscsi_cdb[0], + pt->pscsi_result); + task->task_scsi_status = SAM_STAT_CHECK_CONDITION; + task->task_error_status = PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + TASK_CMD(task)->transport_error_status = + PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + transport_complete_task(task, 0); + break; + } + + return; +} + +static void pscsi_req_done(struct request *req, int uptodate) +{ + struct se_task *task = req->end_io_data; + struct pscsi_plugin_task *pt = PSCSI_TASK(task); + + pt->pscsi_result = req->errors; + pt->pscsi_resid = req->resid_len; + + pscsi_process_SAM_status(task, pt); + /* + * Release BIDI-READ if present + */ + if (req->next_rq != NULL) + __blk_put_request(req->q, req->next_rq); + + __blk_put_request(req->q, req); + pt->pscsi_req = NULL; +} + +static struct se_subsystem_api pscsi_template = { + .name = "pscsi", + .owner = THIS_MODULE, + .transport_type = TRANSPORT_PLUGIN_PHBA_PDEV, + .cdb_none = pscsi_CDB_none, + .map_task_non_SG = pscsi_map_task_non_SG, + .map_task_SG = pscsi_map_task_SG, + .attach_hba = pscsi_attach_hba, + .detach_hba = pscsi_detach_hba, + .pmode_enable_hba = pscsi_pmode_enable_hba, + .allocate_virtdevice = pscsi_allocate_virtdevice, + .create_virtdevice = pscsi_create_virtdevice, + .free_device = pscsi_free_device, + .transport_complete = pscsi_transport_complete, + .alloc_task = pscsi_alloc_task, + .do_task = pscsi_do_task, + .free_task = pscsi_free_task, + .check_configfs_dev_params = pscsi_check_configfs_dev_params, + .set_configfs_dev_params = pscsi_set_configfs_dev_params, + .show_configfs_dev_params = pscsi_show_configfs_dev_params, + .get_cdb = pscsi_get_cdb, + .get_sense_buffer = pscsi_get_sense_buffer, + .get_device_rev = pscsi_get_device_rev, + .get_device_type = pscsi_get_device_type, + .get_blocks = pscsi_get_blocks, +}; + +static int __init pscsi_module_init(void) +{ + return transport_subsystem_register(&pscsi_template); +} + +static void pscsi_module_exit(void) +{ + transport_subsystem_release(&pscsi_template); +} + +MODULE_DESCRIPTION("TCM PSCSI subsystem plugin"); +MODULE_AUTHOR("nab@Linux-iSCSI.org"); +MODULE_LICENSE("GPL"); + +module_init(pscsi_module_init); +module_exit(pscsi_module_exit); diff --git a/drivers/target/target_core_pscsi.h b/drivers/target/target_core_pscsi.h new file mode 100644 index 000000000000..a4cd5d352c3a --- /dev/null +++ b/drivers/target/target_core_pscsi.h @@ -0,0 +1,65 @@ +#ifndef TARGET_CORE_PSCSI_H +#define TARGET_CORE_PSCSI_H + +#define PSCSI_VERSION "v4.0" +#define PSCSI_VIRTUAL_HBA_DEPTH 2048 + +/* used in pscsi_find_alloc_len() */ +#ifndef INQUIRY_DATA_SIZE +#define INQUIRY_DATA_SIZE 0x24 +#endif + +/* used in pscsi_add_device_to_list() */ +#define PSCSI_DEFAULT_QUEUEDEPTH 1 + +#define PS_RETRY 5 +#define PS_TIMEOUT_DISK (15*HZ) +#define PS_TIMEOUT_OTHER (500*HZ) + +#include +#include +#include +#include +#include + +struct pscsi_plugin_task { + struct se_task pscsi_task; + unsigned char *pscsi_cdb; + unsigned char __pscsi_cdb[TCM_MAX_COMMAND_SIZE]; + unsigned char pscsi_sense[SCSI_SENSE_BUFFERSIZE]; + int pscsi_direction; + int pscsi_result; + u32 pscsi_resid; + struct request *pscsi_req; +} ____cacheline_aligned; + +#define PDF_HAS_CHANNEL_ID 0x01 +#define PDF_HAS_TARGET_ID 0x02 +#define PDF_HAS_LUN_ID 0x04 +#define PDF_HAS_VPD_UNIT_SERIAL 0x08 +#define PDF_HAS_VPD_DEV_IDENT 0x10 +#define PDF_HAS_VIRT_HOST_ID 0x20 + +struct pscsi_dev_virt { + int pdv_flags; + int pdv_host_id; + int pdv_channel_id; + int pdv_target_id; + int pdv_lun_id; + struct block_device *pdv_bd; + struct scsi_device *pdv_sd; + struct se_hba *pdv_se_hba; +} ____cacheline_aligned; + +typedef enum phv_modes { + PHV_VIRUTAL_HOST_ID, + PHV_LLD_SCSI_HOST_NO +} phv_modes_t; + +struct pscsi_hba_virt { + int phv_host_id; + phv_modes_t phv_mode; + struct Scsi_Host *phv_lld_host; +} ____cacheline_aligned; + +#endif /*** TARGET_CORE_PSCSI_H ***/ diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c new file mode 100644 index 000000000000..979aebf20019 --- /dev/null +++ b/drivers/target/target_core_rd.c @@ -0,0 +1,1091 @@ +/******************************************************************************* + * Filename: target_core_rd.c + * + * This file contains the Storage Engine <-> Ramdisk transport + * specific functions. + * + * Copyright (c) 2003, 2004, 2005 PyX Technologies, Inc. + * Copyright (c) 2005, 2006, 2007 SBE, Inc. + * Copyright (c) 2007-2010 Rising Tide Systems + * Copyright (c) 2008-2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ******************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "target_core_rd.h" + +static struct se_subsystem_api rd_dr_template; +static struct se_subsystem_api rd_mcp_template; + +/* #define DEBUG_RAMDISK_MCP */ +/* #define DEBUG_RAMDISK_DR */ + +/* rd_attach_hba(): (Part of se_subsystem_api_t template) + * + * + */ +static int rd_attach_hba(struct se_hba *hba, u32 host_id) +{ + struct rd_host *rd_host; + + rd_host = kzalloc(sizeof(struct rd_host), GFP_KERNEL); + if (!(rd_host)) { + printk(KERN_ERR "Unable to allocate memory for struct rd_host\n"); + return -ENOMEM; + } + + rd_host->rd_host_id = host_id; + + atomic_set(&hba->left_queue_depth, RD_HBA_QUEUE_DEPTH); + atomic_set(&hba->max_queue_depth, RD_HBA_QUEUE_DEPTH); + hba->hba_ptr = (void *) rd_host; + + printk(KERN_INFO "CORE_HBA[%d] - TCM Ramdisk HBA Driver %s on" + " Generic Target Core Stack %s\n", hba->hba_id, + RD_HBA_VERSION, TARGET_CORE_MOD_VERSION); + printk(KERN_INFO "CORE_HBA[%d] - Attached Ramdisk HBA: %u to Generic" + " Target Core TCQ Depth: %d MaxSectors: %u\n", hba->hba_id, + rd_host->rd_host_id, atomic_read(&hba->max_queue_depth), + RD_MAX_SECTORS); + + return 0; +} + +static void rd_detach_hba(struct se_hba *hba) +{ + struct rd_host *rd_host = hba->hba_ptr; + + printk(KERN_INFO "CORE_HBA[%d] - Detached Ramdisk HBA: %u from" + " Generic Target Core\n", hba->hba_id, rd_host->rd_host_id); + + kfree(rd_host); + hba->hba_ptr = NULL; +} + +/* rd_release_device_space(): + * + * + */ +static void rd_release_device_space(struct rd_dev *rd_dev) +{ + u32 i, j, page_count = 0, sg_per_table; + struct rd_dev_sg_table *sg_table; + struct page *pg; + struct scatterlist *sg; + + if (!rd_dev->sg_table_array || !rd_dev->sg_table_count) + return; + + sg_table = rd_dev->sg_table_array; + + for (i = 0; i < rd_dev->sg_table_count; i++) { + sg = sg_table[i].sg_table; + sg_per_table = sg_table[i].rd_sg_count; + + for (j = 0; j < sg_per_table; j++) { + pg = sg_page(&sg[j]); + if ((pg)) { + __free_page(pg); + page_count++; + } + } + + kfree(sg); + } + + printk(KERN_INFO "CORE_RD[%u] - Released device space for Ramdisk" + " Device ID: %u, pages %u in %u tables total bytes %lu\n", + rd_dev->rd_host->rd_host_id, rd_dev->rd_dev_id, page_count, + rd_dev->sg_table_count, (unsigned long)page_count * PAGE_SIZE); + + kfree(sg_table); + rd_dev->sg_table_array = NULL; + rd_dev->sg_table_count = 0; +} + + +/* rd_build_device_space(): + * + * + */ +static int rd_build_device_space(struct rd_dev *rd_dev) +{ + u32 i = 0, j, page_offset = 0, sg_per_table, sg_tables, total_sg_needed; + u32 max_sg_per_table = (RD_MAX_ALLOCATION_SIZE / + sizeof(struct scatterlist)); + struct rd_dev_sg_table *sg_table; + struct page *pg; + struct scatterlist *sg; + + if (rd_dev->rd_page_count <= 0) { + printk(KERN_ERR "Illegal page count: %u for Ramdisk device\n", + rd_dev->rd_page_count); + return -1; + } + total_sg_needed = rd_dev->rd_page_count; + + sg_tables = (total_sg_needed / max_sg_per_table) + 1; + + sg_table = kzalloc(sg_tables * sizeof(struct rd_dev_sg_table), GFP_KERNEL); + if (!(sg_table)) { + printk(KERN_ERR "Unable to allocate memory for Ramdisk" + " scatterlist tables\n"); + return -1; + } + + rd_dev->sg_table_array = sg_table; + rd_dev->sg_table_count = sg_tables; + + while (total_sg_needed) { + sg_per_table = (total_sg_needed > max_sg_per_table) ? + max_sg_per_table : total_sg_needed; + + sg = kzalloc(sg_per_table * sizeof(struct scatterlist), + GFP_KERNEL); + if (!(sg)) { + printk(KERN_ERR "Unable to allocate scatterlist array" + " for struct rd_dev\n"); + return -1; + } + + sg_init_table((struct scatterlist *)&sg[0], sg_per_table); + + sg_table[i].sg_table = sg; + sg_table[i].rd_sg_count = sg_per_table; + sg_table[i].page_start_offset = page_offset; + sg_table[i++].page_end_offset = (page_offset + sg_per_table) + - 1; + + for (j = 0; j < sg_per_table; j++) { + pg = alloc_pages(GFP_KERNEL, 0); + if (!(pg)) { + printk(KERN_ERR "Unable to allocate scatterlist" + " pages for struct rd_dev_sg_table\n"); + return -1; + } + sg_assign_page(&sg[j], pg); + sg[j].length = PAGE_SIZE; + } + + page_offset += sg_per_table; + total_sg_needed -= sg_per_table; + } + + printk(KERN_INFO "CORE_RD[%u] - Built Ramdisk Device ID: %u space of" + " %u pages in %u tables\n", rd_dev->rd_host->rd_host_id, + rd_dev->rd_dev_id, rd_dev->rd_page_count, + rd_dev->sg_table_count); + + return 0; +} + +static void *rd_allocate_virtdevice( + struct se_hba *hba, + const char *name, + int rd_direct) +{ + struct rd_dev *rd_dev; + struct rd_host *rd_host = hba->hba_ptr; + + rd_dev = kzalloc(sizeof(struct rd_dev), GFP_KERNEL); + if (!(rd_dev)) { + printk(KERN_ERR "Unable to allocate memory for struct rd_dev\n"); + return NULL; + } + + rd_dev->rd_host = rd_host; + rd_dev->rd_direct = rd_direct; + + return rd_dev; +} + +static void *rd_DIRECT_allocate_virtdevice(struct se_hba *hba, const char *name) +{ + return rd_allocate_virtdevice(hba, name, 1); +} + +static void *rd_MEMCPY_allocate_virtdevice(struct se_hba *hba, const char *name) +{ + return rd_allocate_virtdevice(hba, name, 0); +} + +/* rd_create_virtdevice(): + * + * + */ +static struct se_device *rd_create_virtdevice( + struct se_hba *hba, + struct se_subsystem_dev *se_dev, + void *p, + int rd_direct) +{ + struct se_device *dev; + struct se_dev_limits dev_limits; + struct rd_dev *rd_dev = p; + struct rd_host *rd_host = hba->hba_ptr; + int dev_flags = 0; + char prod[16], rev[4]; + + memset(&dev_limits, 0, sizeof(struct se_dev_limits)); + + if (rd_build_device_space(rd_dev) < 0) + goto fail; + + snprintf(prod, 16, "RAMDISK-%s", (rd_dev->rd_direct) ? "DR" : "MCP"); + snprintf(rev, 4, "%s", (rd_dev->rd_direct) ? RD_DR_VERSION : + RD_MCP_VERSION); + + dev_limits.limits.logical_block_size = RD_BLOCKSIZE; + dev_limits.limits.max_hw_sectors = RD_MAX_SECTORS; + dev_limits.limits.max_sectors = RD_MAX_SECTORS; + dev_limits.hw_queue_depth = RD_MAX_DEVICE_QUEUE_DEPTH; + dev_limits.queue_depth = RD_DEVICE_QUEUE_DEPTH; + + dev = transport_add_device_to_core_hba(hba, + (rd_dev->rd_direct) ? &rd_dr_template : + &rd_mcp_template, se_dev, dev_flags, (void *)rd_dev, + &dev_limits, prod, rev); + if (!(dev)) + goto fail; + + rd_dev->rd_dev_id = rd_host->rd_host_dev_id_count++; + rd_dev->rd_queue_depth = dev->queue_depth; + + printk(KERN_INFO "CORE_RD[%u] - Added TCM %s Ramdisk Device ID: %u of" + " %u pages in %u tables, %lu total bytes\n", + rd_host->rd_host_id, (!rd_dev->rd_direct) ? "MEMCPY" : + "DIRECT", rd_dev->rd_dev_id, rd_dev->rd_page_count, + rd_dev->sg_table_count, + (unsigned long)(rd_dev->rd_page_count * PAGE_SIZE)); + + return dev; + +fail: + rd_release_device_space(rd_dev); + return NULL; +} + +static struct se_device *rd_DIRECT_create_virtdevice( + struct se_hba *hba, + struct se_subsystem_dev *se_dev, + void *p) +{ + return rd_create_virtdevice(hba, se_dev, p, 1); +} + +static struct se_device *rd_MEMCPY_create_virtdevice( + struct se_hba *hba, + struct se_subsystem_dev *se_dev, + void *p) +{ + return rd_create_virtdevice(hba, se_dev, p, 0); +} + +/* rd_free_device(): (Part of se_subsystem_api_t template) + * + * + */ +static void rd_free_device(void *p) +{ + struct rd_dev *rd_dev = p; + + rd_release_device_space(rd_dev); + kfree(rd_dev); +} + +static inline struct rd_request *RD_REQ(struct se_task *task) +{ + return container_of(task, struct rd_request, rd_task); +} + +static struct se_task * +rd_alloc_task(struct se_cmd *cmd) +{ + struct rd_request *rd_req; + + rd_req = kzalloc(sizeof(struct rd_request), GFP_KERNEL); + if (!rd_req) { + printk(KERN_ERR "Unable to allocate struct rd_request\n"); + return NULL; + } + rd_req->rd_dev = SE_DEV(cmd)->dev_ptr; + + return &rd_req->rd_task; +} + +/* rd_get_sg_table(): + * + * + */ +static struct rd_dev_sg_table *rd_get_sg_table(struct rd_dev *rd_dev, u32 page) +{ + u32 i; + struct rd_dev_sg_table *sg_table; + + for (i = 0; i < rd_dev->sg_table_count; i++) { + sg_table = &rd_dev->sg_table_array[i]; + if ((sg_table->page_start_offset <= page) && + (sg_table->page_end_offset >= page)) + return sg_table; + } + + printk(KERN_ERR "Unable to locate struct rd_dev_sg_table for page: %u\n", + page); + + return NULL; +} + +/* rd_MEMCPY_read(): + * + * + */ +static int rd_MEMCPY_read(struct rd_request *req) +{ + struct se_task *task = &req->rd_task; + struct rd_dev *dev = req->rd_dev; + struct rd_dev_sg_table *table; + struct scatterlist *sg_d, *sg_s; + void *dst, *src; + u32 i = 0, j = 0, dst_offset = 0, src_offset = 0; + u32 length, page_end = 0, table_sg_end; + u32 rd_offset = req->rd_offset; + + table = rd_get_sg_table(dev, req->rd_page); + if (!(table)) + return -1; + + table_sg_end = (table->page_end_offset - req->rd_page); + sg_d = task->task_sg; + sg_s = &table->sg_table[req->rd_page - table->page_start_offset]; +#ifdef DEBUG_RAMDISK_MCP + printk(KERN_INFO "RD[%u]: Read LBA: %llu, Size: %u Page: %u, Offset:" + " %u\n", dev->rd_dev_id, task->task_lba, req->rd_size, + req->rd_page, req->rd_offset); +#endif + src_offset = rd_offset; + + while (req->rd_size) { + if ((sg_d[i].length - dst_offset) < + (sg_s[j].length - src_offset)) { + length = (sg_d[i].length - dst_offset); +#ifdef DEBUG_RAMDISK_MCP + printk(KERN_INFO "Step 1 - sg_d[%d]: %p length: %d" + " offset: %u sg_s[%d].length: %u\n", i, + &sg_d[i], sg_d[i].length, sg_d[i].offset, j, + sg_s[j].length); + printk(KERN_INFO "Step 1 - length: %u dst_offset: %u" + " src_offset: %u\n", length, dst_offset, + src_offset); +#endif + if (length > req->rd_size) + length = req->rd_size; + + dst = sg_virt(&sg_d[i++]) + dst_offset; + if (!dst) + BUG(); + + src = sg_virt(&sg_s[j]) + src_offset; + if (!src) + BUG(); + + dst_offset = 0; + src_offset = length; + page_end = 0; + } else { + length = (sg_s[j].length - src_offset); +#ifdef DEBUG_RAMDISK_MCP + printk(KERN_INFO "Step 2 - sg_d[%d]: %p length: %d" + " offset: %u sg_s[%d].length: %u\n", i, + &sg_d[i], sg_d[i].length, sg_d[i].offset, + j, sg_s[j].length); + printk(KERN_INFO "Step 2 - length: %u dst_offset: %u" + " src_offset: %u\n", length, dst_offset, + src_offset); +#endif + if (length > req->rd_size) + length = req->rd_size; + + dst = sg_virt(&sg_d[i]) + dst_offset; + if (!dst) + BUG(); + + if (sg_d[i].length == length) { + i++; + dst_offset = 0; + } else + dst_offset = length; + + src = sg_virt(&sg_s[j++]) + src_offset; + if (!src) + BUG(); + + src_offset = 0; + page_end = 1; + } + + memcpy(dst, src, length); + +#ifdef DEBUG_RAMDISK_MCP + printk(KERN_INFO "page: %u, remaining size: %u, length: %u," + " i: %u, j: %u\n", req->rd_page, + (req->rd_size - length), length, i, j); +#endif + req->rd_size -= length; + if (!(req->rd_size)) + return 0; + + if (!page_end) + continue; + + if (++req->rd_page <= table->page_end_offset) { +#ifdef DEBUG_RAMDISK_MCP + printk(KERN_INFO "page: %u in same page table\n", + req->rd_page); +#endif + continue; + } +#ifdef DEBUG_RAMDISK_MCP + printk(KERN_INFO "getting new page table for page: %u\n", + req->rd_page); +#endif + table = rd_get_sg_table(dev, req->rd_page); + if (!(table)) + return -1; + + sg_s = &table->sg_table[j = 0]; + } + + return 0; +} + +/* rd_MEMCPY_write(): + * + * + */ +static int rd_MEMCPY_write(struct rd_request *req) +{ + struct se_task *task = &req->rd_task; + struct rd_dev *dev = req->rd_dev; + struct rd_dev_sg_table *table; + struct scatterlist *sg_d, *sg_s; + void *dst, *src; + u32 i = 0, j = 0, dst_offset = 0, src_offset = 0; + u32 length, page_end = 0, table_sg_end; + u32 rd_offset = req->rd_offset; + + table = rd_get_sg_table(dev, req->rd_page); + if (!(table)) + return -1; + + table_sg_end = (table->page_end_offset - req->rd_page); + sg_d = &table->sg_table[req->rd_page - table->page_start_offset]; + sg_s = task->task_sg; +#ifdef DEBUG_RAMDISK_MCP + printk(KERN_INFO "RD[%d] Write LBA: %llu, Size: %u, Page: %u," + " Offset: %u\n", dev->rd_dev_id, task->task_lba, req->rd_size, + req->rd_page, req->rd_offset); +#endif + dst_offset = rd_offset; + + while (req->rd_size) { + if ((sg_s[i].length - src_offset) < + (sg_d[j].length - dst_offset)) { + length = (sg_s[i].length - src_offset); +#ifdef DEBUG_RAMDISK_MCP + printk(KERN_INFO "Step 1 - sg_s[%d]: %p length: %d" + " offset: %d sg_d[%d].length: %u\n", i, + &sg_s[i], sg_s[i].length, sg_s[i].offset, + j, sg_d[j].length); + printk(KERN_INFO "Step 1 - length: %u src_offset: %u" + " dst_offset: %u\n", length, src_offset, + dst_offset); +#endif + if (length > req->rd_size) + length = req->rd_size; + + src = sg_virt(&sg_s[i++]) + src_offset; + if (!src) + BUG(); + + dst = sg_virt(&sg_d[j]) + dst_offset; + if (!dst) + BUG(); + + src_offset = 0; + dst_offset = length; + page_end = 0; + } else { + length = (sg_d[j].length - dst_offset); +#ifdef DEBUG_RAMDISK_MCP + printk(KERN_INFO "Step 2 - sg_s[%d]: %p length: %d" + " offset: %d sg_d[%d].length: %u\n", i, + &sg_s[i], sg_s[i].length, sg_s[i].offset, + j, sg_d[j].length); + printk(KERN_INFO "Step 2 - length: %u src_offset: %u" + " dst_offset: %u\n", length, src_offset, + dst_offset); +#endif + if (length > req->rd_size) + length = req->rd_size; + + src = sg_virt(&sg_s[i]) + src_offset; + if (!src) + BUG(); + + if (sg_s[i].length == length) { + i++; + src_offset = 0; + } else + src_offset = length; + + dst = sg_virt(&sg_d[j++]) + dst_offset; + if (!dst) + BUG(); + + dst_offset = 0; + page_end = 1; + } + + memcpy(dst, src, length); + +#ifdef DEBUG_RAMDISK_MCP + printk(KERN_INFO "page: %u, remaining size: %u, length: %u," + " i: %u, j: %u\n", req->rd_page, + (req->rd_size - length), length, i, j); +#endif + req->rd_size -= length; + if (!(req->rd_size)) + return 0; + + if (!page_end) + continue; + + if (++req->rd_page <= table->page_end_offset) { +#ifdef DEBUG_RAMDISK_MCP + printk(KERN_INFO "page: %u in same page table\n", + req->rd_page); +#endif + continue; + } +#ifdef DEBUG_RAMDISK_MCP + printk(KERN_INFO "getting new page table for page: %u\n", + req->rd_page); +#endif + table = rd_get_sg_table(dev, req->rd_page); + if (!(table)) + return -1; + + sg_d = &table->sg_table[j = 0]; + } + + return 0; +} + +/* rd_MEMCPY_do_task(): (Part of se_subsystem_api_t template) + * + * + */ +static int rd_MEMCPY_do_task(struct se_task *task) +{ + struct se_device *dev = task->se_dev; + struct rd_request *req = RD_REQ(task); + unsigned long long lba; + int ret; + + req->rd_page = (task->task_lba * DEV_ATTRIB(dev)->block_size) / PAGE_SIZE; + lba = task->task_lba; + req->rd_offset = (do_div(lba, + (PAGE_SIZE / DEV_ATTRIB(dev)->block_size))) * + DEV_ATTRIB(dev)->block_size; + req->rd_size = task->task_size; + + if (task->task_data_direction == DMA_FROM_DEVICE) + ret = rd_MEMCPY_read(req); + else + ret = rd_MEMCPY_write(req); + + if (ret != 0) + return ret; + + task->task_scsi_status = GOOD; + transport_complete_task(task, 1); + + return PYX_TRANSPORT_SENT_TO_TRANSPORT; +} + +/* rd_DIRECT_with_offset(): + * + * + */ +static int rd_DIRECT_with_offset( + struct se_task *task, + struct list_head *se_mem_list, + u32 *se_mem_cnt, + u32 *task_offset) +{ + struct rd_request *req = RD_REQ(task); + struct rd_dev *dev = req->rd_dev; + struct rd_dev_sg_table *table; + struct se_mem *se_mem; + struct scatterlist *sg_s; + u32 j = 0, set_offset = 1; + u32 get_next_table = 0, offset_length, table_sg_end; + + table = rd_get_sg_table(dev, req->rd_page); + if (!(table)) + return -1; + + table_sg_end = (table->page_end_offset - req->rd_page); + sg_s = &table->sg_table[req->rd_page - table->page_start_offset]; +#ifdef DEBUG_RAMDISK_DR + printk(KERN_INFO "%s DIRECT LBA: %llu, Size: %u Page: %u, Offset: %u\n", + (task->task_data_direction == DMA_TO_DEVICE) ? + "Write" : "Read", + task->task_lba, req->rd_size, req->rd_page, req->rd_offset); +#endif + while (req->rd_size) { + se_mem = kmem_cache_zalloc(se_mem_cache, GFP_KERNEL); + if (!(se_mem)) { + printk(KERN_ERR "Unable to allocate struct se_mem\n"); + return -1; + } + INIT_LIST_HEAD(&se_mem->se_list); + + if (set_offset) { + offset_length = sg_s[j].length - req->rd_offset; + if (offset_length > req->rd_size) + offset_length = req->rd_size; + + se_mem->se_page = sg_page(&sg_s[j++]); + se_mem->se_off = req->rd_offset; + se_mem->se_len = offset_length; + + set_offset = 0; + get_next_table = (j > table_sg_end); + goto check_eot; + } + + offset_length = (req->rd_size < req->rd_offset) ? + req->rd_size : req->rd_offset; + + se_mem->se_page = sg_page(&sg_s[j]); + se_mem->se_len = offset_length; + + set_offset = 1; + +check_eot: +#ifdef DEBUG_RAMDISK_DR + printk(KERN_INFO "page: %u, size: %u, offset_length: %u, j: %u" + " se_mem: %p, se_page: %p se_off: %u se_len: %u\n", + req->rd_page, req->rd_size, offset_length, j, se_mem, + se_mem->se_page, se_mem->se_off, se_mem->se_len); +#endif + list_add_tail(&se_mem->se_list, se_mem_list); + (*se_mem_cnt)++; + + req->rd_size -= offset_length; + if (!(req->rd_size)) + goto out; + + if (!set_offset && !get_next_table) + continue; + + if (++req->rd_page <= table->page_end_offset) { +#ifdef DEBUG_RAMDISK_DR + printk(KERN_INFO "page: %u in same page table\n", + req->rd_page); +#endif + continue; + } +#ifdef DEBUG_RAMDISK_DR + printk(KERN_INFO "getting new page table for page: %u\n", + req->rd_page); +#endif + table = rd_get_sg_table(dev, req->rd_page); + if (!(table)) + return -1; + + sg_s = &table->sg_table[j = 0]; + } + +out: + T_TASK(task->task_se_cmd)->t_tasks_se_num += *se_mem_cnt; +#ifdef DEBUG_RAMDISK_DR + printk(KERN_INFO "RD_DR - Allocated %u struct se_mem segments for task\n", + *se_mem_cnt); +#endif + return 0; +} + +/* rd_DIRECT_without_offset(): + * + * + */ +static int rd_DIRECT_without_offset( + struct se_task *task, + struct list_head *se_mem_list, + u32 *se_mem_cnt, + u32 *task_offset) +{ + struct rd_request *req = RD_REQ(task); + struct rd_dev *dev = req->rd_dev; + struct rd_dev_sg_table *table; + struct se_mem *se_mem; + struct scatterlist *sg_s; + u32 length, j = 0; + + table = rd_get_sg_table(dev, req->rd_page); + if (!(table)) + return -1; + + sg_s = &table->sg_table[req->rd_page - table->page_start_offset]; +#ifdef DEBUG_RAMDISK_DR + printk(KERN_INFO "%s DIRECT LBA: %llu, Size: %u, Page: %u\n", + (task->task_data_direction == DMA_TO_DEVICE) ? + "Write" : "Read", + task->task_lba, req->rd_size, req->rd_page); +#endif + while (req->rd_size) { + se_mem = kmem_cache_zalloc(se_mem_cache, GFP_KERNEL); + if (!(se_mem)) { + printk(KERN_ERR "Unable to allocate struct se_mem\n"); + return -1; + } + INIT_LIST_HEAD(&se_mem->se_list); + + length = (req->rd_size < sg_s[j].length) ? + req->rd_size : sg_s[j].length; + + se_mem->se_page = sg_page(&sg_s[j++]); + se_mem->se_len = length; + +#ifdef DEBUG_RAMDISK_DR + printk(KERN_INFO "page: %u, size: %u, j: %u se_mem: %p," + " se_page: %p se_off: %u se_len: %u\n", req->rd_page, + req->rd_size, j, se_mem, se_mem->se_page, + se_mem->se_off, se_mem->se_len); +#endif + list_add_tail(&se_mem->se_list, se_mem_list); + (*se_mem_cnt)++; + + req->rd_size -= length; + if (!(req->rd_size)) + goto out; + + if (++req->rd_page <= table->page_end_offset) { +#ifdef DEBUG_RAMDISK_DR + printk("page: %u in same page table\n", + req->rd_page); +#endif + continue; + } +#ifdef DEBUG_RAMDISK_DR + printk(KERN_INFO "getting new page table for page: %u\n", + req->rd_page); +#endif + table = rd_get_sg_table(dev, req->rd_page); + if (!(table)) + return -1; + + sg_s = &table->sg_table[j = 0]; + } + +out: + T_TASK(task->task_se_cmd)->t_tasks_se_num += *se_mem_cnt; +#ifdef DEBUG_RAMDISK_DR + printk(KERN_INFO "RD_DR - Allocated %u struct se_mem segments for task\n", + *se_mem_cnt); +#endif + return 0; +} + +/* rd_DIRECT_do_se_mem_map(): + * + * + */ +static int rd_DIRECT_do_se_mem_map( + struct se_task *task, + struct list_head *se_mem_list, + void *in_mem, + struct se_mem *in_se_mem, + struct se_mem **out_se_mem, + u32 *se_mem_cnt, + u32 *task_offset_in) +{ + struct se_cmd *cmd = task->task_se_cmd; + struct rd_request *req = RD_REQ(task); + u32 task_offset = *task_offset_in; + unsigned long long lba; + int ret; + + req->rd_page = ((task->task_lba * DEV_ATTRIB(task->se_dev)->block_size) / + PAGE_SIZE); + lba = task->task_lba; + req->rd_offset = (do_div(lba, + (PAGE_SIZE / DEV_ATTRIB(task->se_dev)->block_size))) * + DEV_ATTRIB(task->se_dev)->block_size; + req->rd_size = task->task_size; + + if (req->rd_offset) + ret = rd_DIRECT_with_offset(task, se_mem_list, se_mem_cnt, + task_offset_in); + else + ret = rd_DIRECT_without_offset(task, se_mem_list, se_mem_cnt, + task_offset_in); + + if (ret < 0) + return ret; + + if (CMD_TFO(cmd)->task_sg_chaining == 0) + return 0; + /* + * Currently prevent writers from multiple HW fabrics doing + * pci_map_sg() to RD_DR's internal scatterlist memory. + */ + if (cmd->data_direction == DMA_TO_DEVICE) { + printk(KERN_ERR "DMA_TO_DEVICE not supported for" + " RAMDISK_DR with task_sg_chaining=1\n"); + return -1; + } + /* + * Special case for if task_sg_chaining is enabled, then + * we setup struct se_task->task_sg[], as it will be used by + * transport_do_task_sg_chain() for creating chainged SGLs + * across multiple struct se_task->task_sg[]. + */ + if (!(transport_calc_sg_num(task, + list_entry(T_TASK(cmd)->t_mem_list->next, + struct se_mem, se_list), + task_offset))) + return -1; + + return transport_map_mem_to_sg(task, se_mem_list, task->task_sg, + list_entry(T_TASK(cmd)->t_mem_list->next, + struct se_mem, se_list), + out_se_mem, se_mem_cnt, task_offset_in); +} + +/* rd_DIRECT_do_task(): (Part of se_subsystem_api_t template) + * + * + */ +static int rd_DIRECT_do_task(struct se_task *task) +{ + /* + * At this point the locally allocated RD tables have been mapped + * to struct se_mem elements in rd_DIRECT_do_se_mem_map(). + */ + task->task_scsi_status = GOOD; + transport_complete_task(task, 1); + + return PYX_TRANSPORT_SENT_TO_TRANSPORT; +} + +/* rd_free_task(): (Part of se_subsystem_api_t template) + * + * + */ +static void rd_free_task(struct se_task *task) +{ + kfree(RD_REQ(task)); +} + +enum { + Opt_rd_pages, Opt_err +}; + +static match_table_t tokens = { + {Opt_rd_pages, "rd_pages=%d"}, + {Opt_err, NULL} +}; + +static ssize_t rd_set_configfs_dev_params( + struct se_hba *hba, + struct se_subsystem_dev *se_dev, + const char *page, + ssize_t count) +{ + struct rd_dev *rd_dev = se_dev->se_dev_su_ptr; + char *orig, *ptr, *opts; + substring_t args[MAX_OPT_ARGS]; + int ret = 0, arg, token; + + opts = kstrdup(page, GFP_KERNEL); + if (!opts) + return -ENOMEM; + + orig = opts; + + while ((ptr = strsep(&opts, ",")) != NULL) { + if (!*ptr) + continue; + + token = match_token(ptr, tokens, args); + switch (token) { + case Opt_rd_pages: + match_int(args, &arg); + rd_dev->rd_page_count = arg; + printk(KERN_INFO "RAMDISK: Referencing Page" + " Count: %u\n", rd_dev->rd_page_count); + rd_dev->rd_flags |= RDF_HAS_PAGE_COUNT; + break; + default: + break; + } + } + + kfree(orig); + return (!ret) ? count : ret; +} + +static ssize_t rd_check_configfs_dev_params(struct se_hba *hba, struct se_subsystem_dev *se_dev) +{ + struct rd_dev *rd_dev = se_dev->se_dev_su_ptr; + + if (!(rd_dev->rd_flags & RDF_HAS_PAGE_COUNT)) { + printk(KERN_INFO "Missing rd_pages= parameter\n"); + return -1; + } + + return 0; +} + +static ssize_t rd_show_configfs_dev_params( + struct se_hba *hba, + struct se_subsystem_dev *se_dev, + char *b) +{ + struct rd_dev *rd_dev = se_dev->se_dev_su_ptr; + ssize_t bl = sprintf(b, "TCM RamDisk ID: %u RamDisk Makeup: %s\n", + rd_dev->rd_dev_id, (rd_dev->rd_direct) ? + "rd_direct" : "rd_mcp"); + bl += sprintf(b + bl, " PAGES/PAGE_SIZE: %u*%lu" + " SG_table_count: %u\n", rd_dev->rd_page_count, + PAGE_SIZE, rd_dev->sg_table_count); + return bl; +} + +/* rd_get_cdb(): (Part of se_subsystem_api_t template) + * + * + */ +static unsigned char *rd_get_cdb(struct se_task *task) +{ + struct rd_request *req = RD_REQ(task); + + return req->rd_scsi_cdb; +} + +static u32 rd_get_device_rev(struct se_device *dev) +{ + return SCSI_SPC_2; /* Returns SPC-3 in Initiator Data */ +} + +static u32 rd_get_device_type(struct se_device *dev) +{ + return TYPE_DISK; +} + +static sector_t rd_get_blocks(struct se_device *dev) +{ + struct rd_dev *rd_dev = dev->dev_ptr; + unsigned long long blocks_long = ((rd_dev->rd_page_count * PAGE_SIZE) / + DEV_ATTRIB(dev)->block_size) - 1; + + return blocks_long; +} + +static struct se_subsystem_api rd_dr_template = { + .name = "rd_dr", + .transport_type = TRANSPORT_PLUGIN_VHBA_VDEV, + .attach_hba = rd_attach_hba, + .detach_hba = rd_detach_hba, + .allocate_virtdevice = rd_DIRECT_allocate_virtdevice, + .create_virtdevice = rd_DIRECT_create_virtdevice, + .free_device = rd_free_device, + .alloc_task = rd_alloc_task, + .do_task = rd_DIRECT_do_task, + .free_task = rd_free_task, + .check_configfs_dev_params = rd_check_configfs_dev_params, + .set_configfs_dev_params = rd_set_configfs_dev_params, + .show_configfs_dev_params = rd_show_configfs_dev_params, + .get_cdb = rd_get_cdb, + .get_device_rev = rd_get_device_rev, + .get_device_type = rd_get_device_type, + .get_blocks = rd_get_blocks, + .do_se_mem_map = rd_DIRECT_do_se_mem_map, +}; + +static struct se_subsystem_api rd_mcp_template = { + .name = "rd_mcp", + .transport_type = TRANSPORT_PLUGIN_VHBA_VDEV, + .attach_hba = rd_attach_hba, + .detach_hba = rd_detach_hba, + .allocate_virtdevice = rd_MEMCPY_allocate_virtdevice, + .create_virtdevice = rd_MEMCPY_create_virtdevice, + .free_device = rd_free_device, + .alloc_task = rd_alloc_task, + .do_task = rd_MEMCPY_do_task, + .free_task = rd_free_task, + .check_configfs_dev_params = rd_check_configfs_dev_params, + .set_configfs_dev_params = rd_set_configfs_dev_params, + .show_configfs_dev_params = rd_show_configfs_dev_params, + .get_cdb = rd_get_cdb, + .get_device_rev = rd_get_device_rev, + .get_device_type = rd_get_device_type, + .get_blocks = rd_get_blocks, +}; + +int __init rd_module_init(void) +{ + int ret; + + ret = transport_subsystem_register(&rd_dr_template); + if (ret < 0) + return ret; + + ret = transport_subsystem_register(&rd_mcp_template); + if (ret < 0) { + transport_subsystem_release(&rd_dr_template); + return ret; + } + + return 0; +} + +void rd_module_exit(void) +{ + transport_subsystem_release(&rd_dr_template); + transport_subsystem_release(&rd_mcp_template); +} diff --git a/drivers/target/target_core_rd.h b/drivers/target/target_core_rd.h new file mode 100644 index 000000000000..13badfbaf9c0 --- /dev/null +++ b/drivers/target/target_core_rd.h @@ -0,0 +1,73 @@ +#ifndef TARGET_CORE_RD_H +#define TARGET_CORE_RD_H + +#define RD_HBA_VERSION "v4.0" +#define RD_DR_VERSION "4.0" +#define RD_MCP_VERSION "4.0" + +/* Largest piece of memory kmalloc can allocate */ +#define RD_MAX_ALLOCATION_SIZE 65536 +/* Maximum queuedepth for the Ramdisk HBA */ +#define RD_HBA_QUEUE_DEPTH 256 +#define RD_DEVICE_QUEUE_DEPTH 32 +#define RD_MAX_DEVICE_QUEUE_DEPTH 128 +#define RD_BLOCKSIZE 512 +#define RD_MAX_SECTORS 1024 + +extern struct kmem_cache *se_mem_cache; + +/* Used in target_core_init_configfs() for virtual LUN 0 access */ +int __init rd_module_init(void); +void rd_module_exit(void); + +#define RRF_EMULATE_CDB 0x01 +#define RRF_GOT_LBA 0x02 + +struct rd_request { + struct se_task rd_task; + + /* SCSI CDB from iSCSI Command PDU */ + unsigned char rd_scsi_cdb[TCM_MAX_COMMAND_SIZE]; + /* Offset from start of page */ + u32 rd_offset; + /* Starting page in Ramdisk for request */ + u32 rd_page; + /* Total number of pages needed for request */ + u32 rd_page_count; + /* Scatterlist count */ + u32 rd_size; + /* Ramdisk device */ + struct rd_dev *rd_dev; +} ____cacheline_aligned; + +struct rd_dev_sg_table { + u32 page_start_offset; + u32 page_end_offset; + u32 rd_sg_count; + struct scatterlist *sg_table; +} ____cacheline_aligned; + +#define RDF_HAS_PAGE_COUNT 0x01 + +struct rd_dev { + int rd_direct; + u32 rd_flags; + /* Unique Ramdisk Device ID in Ramdisk HBA */ + u32 rd_dev_id; + /* Total page count for ramdisk device */ + u32 rd_page_count; + /* Number of SG tables in sg_table_array */ + u32 sg_table_count; + u32 rd_queue_depth; + /* Array of rd_dev_sg_table_t containing scatterlists */ + struct rd_dev_sg_table *sg_table_array; + /* Ramdisk HBA device is connected to */ + struct rd_host *rd_host; +} ____cacheline_aligned; + +struct rd_host { + u32 rd_host_dev_id_count; + u32 rd_host_id; /* Unique Ramdisk Host ID */ +} ____cacheline_aligned; + +#endif /* TARGET_CORE_RD_H */ diff --git a/drivers/target/target_core_scdb.c b/drivers/target/target_core_scdb.c new file mode 100644 index 000000000000..dc6fed037ab3 --- /dev/null +++ b/drivers/target/target_core_scdb.c @@ -0,0 +1,105 @@ +/******************************************************************************* + * Filename: target_core_scdb.c + * + * This file contains the generic target engine Split CDB related functions. + * + * Copyright (c) 2004-2005 PyX Technologies, Inc. + * Copyright (c) 2005, 2006, 2007 SBE, Inc. + * Copyright (c) 2007-2010 Rising Tide Systems + * Copyright (c) 2008-2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ******************************************************************************/ + +#include +#include +#include +#include + +#include +#include + +#include "target_core_scdb.h" + +/* split_cdb_XX_6(): + * + * 21-bit LBA w/ 8-bit SECTORS + */ +void split_cdb_XX_6( + unsigned long long lba, + u32 *sectors, + unsigned char *cdb) +{ + cdb[1] = (lba >> 16) & 0x1f; + cdb[2] = (lba >> 8) & 0xff; + cdb[3] = lba & 0xff; + cdb[4] = *sectors & 0xff; +} + +/* split_cdb_XX_10(): + * + * 32-bit LBA w/ 16-bit SECTORS + */ +void split_cdb_XX_10( + unsigned long long lba, + u32 *sectors, + unsigned char *cdb) +{ + put_unaligned_be32(lba, &cdb[2]); + put_unaligned_be16(*sectors, &cdb[7]); +} + +/* split_cdb_XX_12(): + * + * 32-bit LBA w/ 32-bit SECTORS + */ +void split_cdb_XX_12( + unsigned long long lba, + u32 *sectors, + unsigned char *cdb) +{ + put_unaligned_be32(lba, &cdb[2]); + put_unaligned_be32(*sectors, &cdb[6]); +} + +/* split_cdb_XX_16(): + * + * 64-bit LBA w/ 32-bit SECTORS + */ +void split_cdb_XX_16( + unsigned long long lba, + u32 *sectors, + unsigned char *cdb) +{ + put_unaligned_be64(lba, &cdb[2]); + put_unaligned_be32(*sectors, &cdb[10]); +} + +/* + * split_cdb_XX_32(): + * + * 64-bit LBA w/ 32-bit SECTORS such as READ_32, WRITE_32 and emulated XDWRITEREAD_32 + */ +void split_cdb_XX_32( + unsigned long long lba, + u32 *sectors, + unsigned char *cdb) +{ + put_unaligned_be64(lba, &cdb[12]); + put_unaligned_be32(*sectors, &cdb[28]); +} diff --git a/drivers/target/target_core_scdb.h b/drivers/target/target_core_scdb.h new file mode 100644 index 000000000000..98cd1c01ed83 --- /dev/null +++ b/drivers/target/target_core_scdb.h @@ -0,0 +1,10 @@ +#ifndef TARGET_CORE_SCDB_H +#define TARGET_CORE_SCDB_H + +extern void split_cdb_XX_6(unsigned long long, u32 *, unsigned char *); +extern void split_cdb_XX_10(unsigned long long, u32 *, unsigned char *); +extern void split_cdb_XX_12(unsigned long long, u32 *, unsigned char *); +extern void split_cdb_XX_16(unsigned long long, u32 *, unsigned char *); +extern void split_cdb_XX_32(unsigned long long, u32 *, unsigned char *); + +#endif /* TARGET_CORE_SCDB_H */ diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c new file mode 100644 index 000000000000..158cecbec718 --- /dev/null +++ b/drivers/target/target_core_tmr.c @@ -0,0 +1,404 @@ +/******************************************************************************* + * Filename: target_core_tmr.c + * + * This file contains SPC-3 task management infrastructure + * + * Copyright (c) 2009,2010 Rising Tide Systems + * Copyright (c) 2009,2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ******************************************************************************/ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "target_core_alua.h" +#include "target_core_pr.h" + +#define DEBUG_LUN_RESET +#ifdef DEBUG_LUN_RESET +#define DEBUG_LR(x...) printk(KERN_INFO x) +#else +#define DEBUG_LR(x...) +#endif + +struct se_tmr_req *core_tmr_alloc_req( + struct se_cmd *se_cmd, + void *fabric_tmr_ptr, + u8 function) +{ + struct se_tmr_req *tmr; + + tmr = kmem_cache_zalloc(se_tmr_req_cache, GFP_KERNEL); + if (!(tmr)) { + printk(KERN_ERR "Unable to allocate struct se_tmr_req\n"); + return ERR_PTR(-ENOMEM); + } + tmr->task_cmd = se_cmd; + tmr->fabric_tmr_ptr = fabric_tmr_ptr; + tmr->function = function; + INIT_LIST_HEAD(&tmr->tmr_list); + + return tmr; +} +EXPORT_SYMBOL(core_tmr_alloc_req); + +void core_tmr_release_req( + struct se_tmr_req *tmr) +{ + struct se_device *dev = tmr->tmr_dev; + + spin_lock(&dev->se_tmr_lock); + list_del(&tmr->tmr_list); + kmem_cache_free(se_tmr_req_cache, tmr); + spin_unlock(&dev->se_tmr_lock); +} + +static void core_tmr_handle_tas_abort( + struct se_node_acl *tmr_nacl, + struct se_cmd *cmd, + int tas, + int fe_count) +{ + if (!(fe_count)) { + transport_cmd_finish_abort(cmd, 1); + return; + } + /* + * TASK ABORTED status (TAS) bit support + */ + if (((tmr_nacl != NULL) && + (tmr_nacl == cmd->se_sess->se_node_acl)) || tas) + transport_send_task_abort(cmd); + + transport_cmd_finish_abort(cmd, 0); +} + +int core_tmr_lun_reset( + struct se_device *dev, + struct se_tmr_req *tmr, + struct list_head *preempt_and_abort_list, + struct se_cmd *prout_cmd) +{ + struct se_cmd *cmd; + struct se_queue_req *qr, *qr_tmp; + struct se_node_acl *tmr_nacl = NULL; + struct se_portal_group *tmr_tpg = NULL; + struct se_queue_obj *qobj = dev->dev_queue_obj; + struct se_tmr_req *tmr_p, *tmr_pp; + struct se_task *task, *task_tmp; + unsigned long flags; + int fe_count, state, tas; + /* + * TASK_ABORTED status bit, this is configurable via ConfigFS + * struct se_device attributes. spc4r17 section 7.4.6 Control mode page + * + * A task aborted status (TAS) bit set to zero specifies that aborted + * tasks shall be terminated by the device server without any response + * to the application client. A TAS bit set to one specifies that tasks + * aborted by the actions of an I_T nexus other than the I_T nexus on + * which the command was received shall be completed with TASK ABORTED + * status (see SAM-4). + */ + tas = DEV_ATTRIB(dev)->emulate_tas; + /* + * Determine if this se_tmr is coming from a $FABRIC_MOD + * or struct se_device passthrough.. + */ + if (tmr && tmr->task_cmd && tmr->task_cmd->se_sess) { + tmr_nacl = tmr->task_cmd->se_sess->se_node_acl; + tmr_tpg = tmr->task_cmd->se_sess->se_tpg; + if (tmr_nacl && tmr_tpg) { + DEBUG_LR("LUN_RESET: TMR caller fabric: %s" + " initiator port %s\n", + TPG_TFO(tmr_tpg)->get_fabric_name(), + tmr_nacl->initiatorname); + } + } + DEBUG_LR("LUN_RESET: %s starting for [%s], tas: %d\n", + (preempt_and_abort_list) ? "Preempt" : "TMR", + TRANSPORT(dev)->name, tas); + /* + * Release all pending and outgoing TMRs aside from the received + * LUN_RESET tmr.. + */ + spin_lock(&dev->se_tmr_lock); + list_for_each_entry_safe(tmr_p, tmr_pp, &dev->dev_tmr_list, tmr_list) { + /* + * Allow the received TMR to return with FUNCTION_COMPLETE. + */ + if (tmr && (tmr_p == tmr)) + continue; + + cmd = tmr_p->task_cmd; + if (!(cmd)) { + printk(KERN_ERR "Unable to locate struct se_cmd for TMR\n"); + continue; + } + /* + * If this function was called with a valid pr_res_key + * parameter (eg: for PROUT PREEMPT_AND_ABORT service action + * skip non regisration key matching TMRs. + */ + if ((preempt_and_abort_list != NULL) && + (core_scsi3_check_cdb_abort_and_preempt( + preempt_and_abort_list, cmd) != 0)) + continue; + spin_unlock(&dev->se_tmr_lock); + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + if (!(atomic_read(&T_TASK(cmd)->t_transport_active))) { + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + spin_lock(&dev->se_tmr_lock); + continue; + } + if (cmd->t_state == TRANSPORT_ISTATE_PROCESSING) { + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + spin_lock(&dev->se_tmr_lock); + continue; + } + DEBUG_LR("LUN_RESET: %s releasing TMR %p Function: 0x%02x," + " Response: 0x%02x, t_state: %d\n", + (preempt_and_abort_list) ? "Preempt" : "", tmr_p, + tmr_p->function, tmr_p->response, cmd->t_state); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + transport_cmd_finish_abort_tmr(cmd); + spin_lock(&dev->se_tmr_lock); + } + spin_unlock(&dev->se_tmr_lock); + /* + * Complete outstanding struct se_task CDBs with TASK_ABORTED SAM status. + * This is following sam4r17, section 5.6 Aborting commands, Table 38 + * for TMR LUN_RESET: + * + * a) "Yes" indicates that each command that is aborted on an I_T nexus + * other than the one that caused the SCSI device condition is + * completed with TASK ABORTED status, if the TAS bit is set to one in + * the Control mode page (see SPC-4). "No" indicates that no status is + * returned for aborted commands. + * + * d) If the logical unit reset is caused by a particular I_T nexus + * (e.g., by a LOGICAL UNIT RESET task management function), then "yes" + * (TASK_ABORTED status) applies. + * + * Otherwise (e.g., if triggered by a hard reset), "no" + * (no TASK_ABORTED SAM status) applies. + * + * Note that this seems to be independent of TAS (Task Aborted Status) + * in the Control Mode Page. + */ + spin_lock_irqsave(&dev->execute_task_lock, flags); + list_for_each_entry_safe(task, task_tmp, &dev->state_task_list, + t_state_list) { + if (!(TASK_CMD(task))) { + printk(KERN_ERR "TASK_CMD(task) is NULL!\n"); + continue; + } + cmd = TASK_CMD(task); + + if (!T_TASK(cmd)) { + printk(KERN_ERR "T_TASK(cmd) is NULL for task: %p cmd:" + " %p ITT: 0x%08x\n", task, cmd, + CMD_TFO(cmd)->get_task_tag(cmd)); + continue; + } + /* + * For PREEMPT_AND_ABORT usage, only process commands + * with a matching reservation key. + */ + if ((preempt_and_abort_list != NULL) && + (core_scsi3_check_cdb_abort_and_preempt( + preempt_and_abort_list, cmd) != 0)) + continue; + /* + * Not aborting PROUT PREEMPT_AND_ABORT CDB.. + */ + if (prout_cmd == cmd) + continue; + + list_del(&task->t_state_list); + atomic_set(&task->task_state_active, 0); + spin_unlock_irqrestore(&dev->execute_task_lock, flags); + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + DEBUG_LR("LUN_RESET: %s cmd: %p task: %p" + " ITT/CmdSN: 0x%08x/0x%08x, i_state: %d, t_state/" + "def_t_state: %d/%d cdb: 0x%02x\n", + (preempt_and_abort_list) ? "Preempt" : "", cmd, task, + CMD_TFO(cmd)->get_task_tag(cmd), 0, + CMD_TFO(cmd)->get_cmd_state(cmd), cmd->t_state, + cmd->deferred_t_state, T_TASK(cmd)->t_task_cdb[0]); + DEBUG_LR("LUN_RESET: ITT[0x%08x] - pr_res_key: 0x%016Lx" + " t_task_cdbs: %d t_task_cdbs_left: %d" + " t_task_cdbs_sent: %d -- t_transport_active: %d" + " t_transport_stop: %d t_transport_sent: %d\n", + CMD_TFO(cmd)->get_task_tag(cmd), cmd->pr_res_key, + T_TASK(cmd)->t_task_cdbs, + atomic_read(&T_TASK(cmd)->t_task_cdbs_left), + atomic_read(&T_TASK(cmd)->t_task_cdbs_sent), + atomic_read(&T_TASK(cmd)->t_transport_active), + atomic_read(&T_TASK(cmd)->t_transport_stop), + atomic_read(&T_TASK(cmd)->t_transport_sent)); + + if (atomic_read(&task->task_active)) { + atomic_set(&task->task_stop, 1); + spin_unlock_irqrestore( + &T_TASK(cmd)->t_state_lock, flags); + + DEBUG_LR("LUN_RESET: Waiting for task: %p to shutdown" + " for dev: %p\n", task, dev); + wait_for_completion(&task->task_stop_comp); + DEBUG_LR("LUN_RESET Completed task: %p shutdown for" + " dev: %p\n", task, dev); + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + atomic_dec(&T_TASK(cmd)->t_task_cdbs_left); + + atomic_set(&task->task_active, 0); + atomic_set(&task->task_stop, 0); + } + __transport_stop_task_timer(task, &flags); + + if (!(atomic_dec_and_test(&T_TASK(cmd)->t_task_cdbs_ex_left))) { + spin_unlock_irqrestore( + &T_TASK(cmd)->t_state_lock, flags); + DEBUG_LR("LUN_RESET: Skipping task: %p, dev: %p for" + " t_task_cdbs_ex_left: %d\n", task, dev, + atomic_read(&T_TASK(cmd)->t_task_cdbs_ex_left)); + + spin_lock_irqsave(&dev->execute_task_lock, flags); + continue; + } + fe_count = atomic_read(&T_TASK(cmd)->t_fe_count); + + if (atomic_read(&T_TASK(cmd)->t_transport_active)) { + DEBUG_LR("LUN_RESET: got t_transport_active = 1 for" + " task: %p, t_fe_count: %d dev: %p\n", task, + fe_count, dev); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, + flags); + core_tmr_handle_tas_abort(tmr_nacl, cmd, tas, fe_count); + + spin_lock_irqsave(&dev->execute_task_lock, flags); + continue; + } + DEBUG_LR("LUN_RESET: Got t_transport_active = 0 for task: %p," + " t_fe_count: %d dev: %p\n", task, fe_count, dev); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + core_tmr_handle_tas_abort(tmr_nacl, cmd, tas, fe_count); + + spin_lock_irqsave(&dev->execute_task_lock, flags); + } + spin_unlock_irqrestore(&dev->execute_task_lock, flags); + /* + * Release all commands remaining in the struct se_device cmd queue. + * + * This follows the same logic as above for the struct se_device + * struct se_task state list, where commands are returned with + * TASK_ABORTED status, if there is an outstanding $FABRIC_MOD + * reference, otherwise the struct se_cmd is released. + */ + spin_lock_irqsave(&qobj->cmd_queue_lock, flags); + list_for_each_entry_safe(qr, qr_tmp, &qobj->qobj_list, qr_list) { + cmd = (struct se_cmd *)qr->cmd; + if (!(cmd)) { + /* + * Skip these for non PREEMPT_AND_ABORT usage.. + */ + if (preempt_and_abort_list != NULL) + continue; + + atomic_dec(&qobj->queue_cnt); + list_del(&qr->qr_list); + kfree(qr); + continue; + } + /* + * For PREEMPT_AND_ABORT usage, only process commands + * with a matching reservation key. + */ + if ((preempt_and_abort_list != NULL) && + (core_scsi3_check_cdb_abort_and_preempt( + preempt_and_abort_list, cmd) != 0)) + continue; + /* + * Not aborting PROUT PREEMPT_AND_ABORT CDB.. + */ + if (prout_cmd == cmd) + continue; + + atomic_dec(&T_TASK(cmd)->t_transport_queue_active); + atomic_dec(&qobj->queue_cnt); + list_del(&qr->qr_list); + spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags); + + state = qr->state; + kfree(qr); + + DEBUG_LR("LUN_RESET: %s from Device Queue: cmd: %p t_state:" + " %d t_fe_count: %d\n", (preempt_and_abort_list) ? + "Preempt" : "", cmd, state, + atomic_read(&T_TASK(cmd)->t_fe_count)); + /* + * Signal that the command has failed via cmd->se_cmd_flags, + * and call TFO->new_cmd_failure() to wakeup any fabric + * dependent code used to wait for unsolicited data out + * allocation to complete. The fabric module is expected + * to dump any remaining unsolicited data out for the aborted + * command at this point. + */ + transport_new_cmd_failure(cmd); + + core_tmr_handle_tas_abort(tmr_nacl, cmd, tas, + atomic_read(&T_TASK(cmd)->t_fe_count)); + spin_lock_irqsave(&qobj->cmd_queue_lock, flags); + } + spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags); + /* + * Clear any legacy SPC-2 reservation when called during + * LOGICAL UNIT RESET + */ + if (!(preempt_and_abort_list) && + (dev->dev_flags & DF_SPC2_RESERVATIONS)) { + spin_lock(&dev->dev_reservation_lock); + dev->dev_reserved_node_acl = NULL; + dev->dev_flags &= ~DF_SPC2_RESERVATIONS; + spin_unlock(&dev->dev_reservation_lock); + printk(KERN_INFO "LUN_RESET: SCSI-2 Released reservation\n"); + } + + spin_lock(&dev->stats_lock); + dev->num_resets++; + spin_unlock(&dev->stats_lock); + + DEBUG_LR("LUN_RESET: %s for [%s] Complete\n", + (preempt_and_abort_list) ? "Preempt" : "TMR", + TRANSPORT(dev)->name); + return 0; +} diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c new file mode 100644 index 000000000000..abfa81a57115 --- /dev/null +++ b/drivers/target/target_core_tpg.c @@ -0,0 +1,826 @@ +/******************************************************************************* + * Filename: target_core_tpg.c + * + * This file contains generic Target Portal Group related functions. + * + * Copyright (c) 2002, 2003, 2004, 2005 PyX Technologies, Inc. + * Copyright (c) 2005, 2006, 2007 SBE, Inc. + * Copyright (c) 2007-2010 Rising Tide Systems + * Copyright (c) 2008-2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ******************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "target_core_hba.h" + +/* core_clear_initiator_node_from_tpg(): + * + * + */ +static void core_clear_initiator_node_from_tpg( + struct se_node_acl *nacl, + struct se_portal_group *tpg) +{ + int i; + struct se_dev_entry *deve; + struct se_lun *lun; + struct se_lun_acl *acl, *acl_tmp; + + spin_lock_irq(&nacl->device_list_lock); + for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) { + deve = &nacl->device_list[i]; + + if (!(deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS)) + continue; + + if (!deve->se_lun) { + printk(KERN_ERR "%s device entries device pointer is" + " NULL, but Initiator has access.\n", + TPG_TFO(tpg)->get_fabric_name()); + continue; + } + + lun = deve->se_lun; + spin_unlock_irq(&nacl->device_list_lock); + core_update_device_list_for_node(lun, NULL, deve->mapped_lun, + TRANSPORT_LUNFLAGS_NO_ACCESS, nacl, tpg, 0); + + spin_lock(&lun->lun_acl_lock); + list_for_each_entry_safe(acl, acl_tmp, + &lun->lun_acl_list, lacl_list) { + if (!(strcmp(acl->initiatorname, + nacl->initiatorname)) && + (acl->mapped_lun == deve->mapped_lun)) + break; + } + + if (!acl) { + printk(KERN_ERR "Unable to locate struct se_lun_acl for %s," + " mapped_lun: %u\n", nacl->initiatorname, + deve->mapped_lun); + spin_unlock(&lun->lun_acl_lock); + spin_lock_irq(&nacl->device_list_lock); + continue; + } + + list_del(&acl->lacl_list); + spin_unlock(&lun->lun_acl_lock); + + spin_lock_irq(&nacl->device_list_lock); + kfree(acl); + } + spin_unlock_irq(&nacl->device_list_lock); +} + +/* __core_tpg_get_initiator_node_acl(): + * + * spin_lock_bh(&tpg->acl_node_lock); must be held when calling + */ +struct se_node_acl *__core_tpg_get_initiator_node_acl( + struct se_portal_group *tpg, + const char *initiatorname) +{ + struct se_node_acl *acl; + + list_for_each_entry(acl, &tpg->acl_node_list, acl_list) { + if (!(strcmp(acl->initiatorname, initiatorname))) + return acl; + } + + return NULL; +} + +/* core_tpg_get_initiator_node_acl(): + * + * + */ +struct se_node_acl *core_tpg_get_initiator_node_acl( + struct se_portal_group *tpg, + unsigned char *initiatorname) +{ + struct se_node_acl *acl; + + spin_lock_bh(&tpg->acl_node_lock); + list_for_each_entry(acl, &tpg->acl_node_list, acl_list) { + if (!(strcmp(acl->initiatorname, initiatorname)) && + (!(acl->dynamic_node_acl))) { + spin_unlock_bh(&tpg->acl_node_lock); + return acl; + } + } + spin_unlock_bh(&tpg->acl_node_lock); + + return NULL; +} + +/* core_tpg_add_node_to_devs(): + * + * + */ +void core_tpg_add_node_to_devs( + struct se_node_acl *acl, + struct se_portal_group *tpg) +{ + int i = 0; + u32 lun_access = 0; + struct se_lun *lun; + struct se_device *dev; + + spin_lock(&tpg->tpg_lun_lock); + for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) { + lun = &tpg->tpg_lun_list[i]; + if (lun->lun_status != TRANSPORT_LUN_STATUS_ACTIVE) + continue; + + spin_unlock(&tpg->tpg_lun_lock); + + dev = lun->lun_se_dev; + /* + * By default in LIO-Target $FABRIC_MOD, + * demo_mode_write_protect is ON, or READ_ONLY; + */ + if (!(TPG_TFO(tpg)->tpg_check_demo_mode_write_protect(tpg))) { + if (dev->dev_flags & DF_READ_ONLY) + lun_access = TRANSPORT_LUNFLAGS_READ_ONLY; + else + lun_access = TRANSPORT_LUNFLAGS_READ_WRITE; + } else { + /* + * Allow only optical drives to issue R/W in default RO + * demo mode. + */ + if (TRANSPORT(dev)->get_device_type(dev) == TYPE_DISK) + lun_access = TRANSPORT_LUNFLAGS_READ_ONLY; + else + lun_access = TRANSPORT_LUNFLAGS_READ_WRITE; + } + + printk(KERN_INFO "TARGET_CORE[%s]->TPG[%u]_LUN[%u] - Adding %s" + " access for LUN in Demo Mode\n", + TPG_TFO(tpg)->get_fabric_name(), + TPG_TFO(tpg)->tpg_get_tag(tpg), lun->unpacked_lun, + (lun_access == TRANSPORT_LUNFLAGS_READ_WRITE) ? + "READ-WRITE" : "READ-ONLY"); + + core_update_device_list_for_node(lun, NULL, lun->unpacked_lun, + lun_access, acl, tpg, 1); + spin_lock(&tpg->tpg_lun_lock); + } + spin_unlock(&tpg->tpg_lun_lock); +} + +/* core_set_queue_depth_for_node(): + * + * + */ +static int core_set_queue_depth_for_node( + struct se_portal_group *tpg, + struct se_node_acl *acl) +{ + if (!acl->queue_depth) { + printk(KERN_ERR "Queue depth for %s Initiator Node: %s is 0," + "defaulting to 1.\n", TPG_TFO(tpg)->get_fabric_name(), + acl->initiatorname); + acl->queue_depth = 1; + } + + return 0; +} + +/* core_create_device_list_for_node(): + * + * + */ +static int core_create_device_list_for_node(struct se_node_acl *nacl) +{ + struct se_dev_entry *deve; + int i; + + nacl->device_list = kzalloc(sizeof(struct se_dev_entry) * + TRANSPORT_MAX_LUNS_PER_TPG, GFP_KERNEL); + if (!(nacl->device_list)) { + printk(KERN_ERR "Unable to allocate memory for" + " struct se_node_acl->device_list\n"); + return -1; + } + for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) { + deve = &nacl->device_list[i]; + + atomic_set(&deve->ua_count, 0); + atomic_set(&deve->pr_ref_count, 0); + spin_lock_init(&deve->ua_lock); + INIT_LIST_HEAD(&deve->alua_port_list); + INIT_LIST_HEAD(&deve->ua_list); + } + + return 0; +} + +/* core_tpg_check_initiator_node_acl() + * + * + */ +struct se_node_acl *core_tpg_check_initiator_node_acl( + struct se_portal_group *tpg, + unsigned char *initiatorname) +{ + struct se_node_acl *acl; + + acl = core_tpg_get_initiator_node_acl(tpg, initiatorname); + if ((acl)) + return acl; + + if (!(TPG_TFO(tpg)->tpg_check_demo_mode(tpg))) + return NULL; + + acl = TPG_TFO(tpg)->tpg_alloc_fabric_acl(tpg); + if (!(acl)) + return NULL; + + INIT_LIST_HEAD(&acl->acl_list); + INIT_LIST_HEAD(&acl->acl_sess_list); + spin_lock_init(&acl->device_list_lock); + spin_lock_init(&acl->nacl_sess_lock); + atomic_set(&acl->acl_pr_ref_count, 0); + atomic_set(&acl->mib_ref_count, 0); + acl->queue_depth = TPG_TFO(tpg)->tpg_get_default_depth(tpg); + snprintf(acl->initiatorname, TRANSPORT_IQN_LEN, "%s", initiatorname); + acl->se_tpg = tpg; + acl->acl_index = scsi_get_new_index(SCSI_AUTH_INTR_INDEX); + spin_lock_init(&acl->stats_lock); + acl->dynamic_node_acl = 1; + + TPG_TFO(tpg)->set_default_node_attributes(acl); + + if (core_create_device_list_for_node(acl) < 0) { + TPG_TFO(tpg)->tpg_release_fabric_acl(tpg, acl); + return NULL; + } + + if (core_set_queue_depth_for_node(tpg, acl) < 0) { + core_free_device_list_for_node(acl, tpg); + TPG_TFO(tpg)->tpg_release_fabric_acl(tpg, acl); + return NULL; + } + + core_tpg_add_node_to_devs(acl, tpg); + + spin_lock_bh(&tpg->acl_node_lock); + list_add_tail(&acl->acl_list, &tpg->acl_node_list); + tpg->num_node_acls++; + spin_unlock_bh(&tpg->acl_node_lock); + + printk("%s_TPG[%u] - Added DYNAMIC ACL with TCQ Depth: %d for %s" + " Initiator Node: %s\n", TPG_TFO(tpg)->get_fabric_name(), + TPG_TFO(tpg)->tpg_get_tag(tpg), acl->queue_depth, + TPG_TFO(tpg)->get_fabric_name(), initiatorname); + + return acl; +} +EXPORT_SYMBOL(core_tpg_check_initiator_node_acl); + +void core_tpg_wait_for_nacl_pr_ref(struct se_node_acl *nacl) +{ + while (atomic_read(&nacl->acl_pr_ref_count) != 0) + cpu_relax(); +} + +void core_tpg_wait_for_mib_ref(struct se_node_acl *nacl) +{ + while (atomic_read(&nacl->mib_ref_count) != 0) + cpu_relax(); +} + +void core_tpg_clear_object_luns(struct se_portal_group *tpg) +{ + int i, ret; + struct se_lun *lun; + + spin_lock(&tpg->tpg_lun_lock); + for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) { + lun = &tpg->tpg_lun_list[i]; + + if ((lun->lun_status != TRANSPORT_LUN_STATUS_ACTIVE) || + (lun->lun_se_dev == NULL)) + continue; + + spin_unlock(&tpg->tpg_lun_lock); + ret = core_dev_del_lun(tpg, lun->unpacked_lun); + spin_lock(&tpg->tpg_lun_lock); + } + spin_unlock(&tpg->tpg_lun_lock); +} +EXPORT_SYMBOL(core_tpg_clear_object_luns); + +/* core_tpg_add_initiator_node_acl(): + * + * + */ +struct se_node_acl *core_tpg_add_initiator_node_acl( + struct se_portal_group *tpg, + struct se_node_acl *se_nacl, + const char *initiatorname, + u32 queue_depth) +{ + struct se_node_acl *acl = NULL; + + spin_lock_bh(&tpg->acl_node_lock); + acl = __core_tpg_get_initiator_node_acl(tpg, initiatorname); + if ((acl)) { + if (acl->dynamic_node_acl) { + acl->dynamic_node_acl = 0; + printk(KERN_INFO "%s_TPG[%u] - Replacing dynamic ACL" + " for %s\n", TPG_TFO(tpg)->get_fabric_name(), + TPG_TFO(tpg)->tpg_get_tag(tpg), initiatorname); + spin_unlock_bh(&tpg->acl_node_lock); + /* + * Release the locally allocated struct se_node_acl + * because * core_tpg_add_initiator_node_acl() returned + * a pointer to an existing demo mode node ACL. + */ + if (se_nacl) + TPG_TFO(tpg)->tpg_release_fabric_acl(tpg, + se_nacl); + goto done; + } + + printk(KERN_ERR "ACL entry for %s Initiator" + " Node %s already exists for TPG %u, ignoring" + " request.\n", TPG_TFO(tpg)->get_fabric_name(), + initiatorname, TPG_TFO(tpg)->tpg_get_tag(tpg)); + spin_unlock_bh(&tpg->acl_node_lock); + return ERR_PTR(-EEXIST); + } + spin_unlock_bh(&tpg->acl_node_lock); + + if (!(se_nacl)) { + printk("struct se_node_acl pointer is NULL\n"); + return ERR_PTR(-EINVAL); + } + /* + * For v4.x logic the se_node_acl_s is hanging off a fabric + * dependent structure allocated via + * struct target_core_fabric_ops->fabric_make_nodeacl() + */ + acl = se_nacl; + + INIT_LIST_HEAD(&acl->acl_list); + INIT_LIST_HEAD(&acl->acl_sess_list); + spin_lock_init(&acl->device_list_lock); + spin_lock_init(&acl->nacl_sess_lock); + atomic_set(&acl->acl_pr_ref_count, 0); + acl->queue_depth = queue_depth; + snprintf(acl->initiatorname, TRANSPORT_IQN_LEN, "%s", initiatorname); + acl->se_tpg = tpg; + acl->acl_index = scsi_get_new_index(SCSI_AUTH_INTR_INDEX); + spin_lock_init(&acl->stats_lock); + + TPG_TFO(tpg)->set_default_node_attributes(acl); + + if (core_create_device_list_for_node(acl) < 0) { + TPG_TFO(tpg)->tpg_release_fabric_acl(tpg, acl); + return ERR_PTR(-ENOMEM); + } + + if (core_set_queue_depth_for_node(tpg, acl) < 0) { + core_free_device_list_for_node(acl, tpg); + TPG_TFO(tpg)->tpg_release_fabric_acl(tpg, acl); + return ERR_PTR(-EINVAL); + } + + spin_lock_bh(&tpg->acl_node_lock); + list_add_tail(&acl->acl_list, &tpg->acl_node_list); + tpg->num_node_acls++; + spin_unlock_bh(&tpg->acl_node_lock); + +done: + printk(KERN_INFO "%s_TPG[%hu] - Added ACL with TCQ Depth: %d for %s" + " Initiator Node: %s\n", TPG_TFO(tpg)->get_fabric_name(), + TPG_TFO(tpg)->tpg_get_tag(tpg), acl->queue_depth, + TPG_TFO(tpg)->get_fabric_name(), initiatorname); + + return acl; +} +EXPORT_SYMBOL(core_tpg_add_initiator_node_acl); + +/* core_tpg_del_initiator_node_acl(): + * + * + */ +int core_tpg_del_initiator_node_acl( + struct se_portal_group *tpg, + struct se_node_acl *acl, + int force) +{ + struct se_session *sess, *sess_tmp; + int dynamic_acl = 0; + + spin_lock_bh(&tpg->acl_node_lock); + if (acl->dynamic_node_acl) { + acl->dynamic_node_acl = 0; + dynamic_acl = 1; + } + list_del(&acl->acl_list); + tpg->num_node_acls--; + spin_unlock_bh(&tpg->acl_node_lock); + + spin_lock_bh(&tpg->session_lock); + list_for_each_entry_safe(sess, sess_tmp, + &tpg->tpg_sess_list, sess_list) { + if (sess->se_node_acl != acl) + continue; + /* + * Determine if the session needs to be closed by our context. + */ + if (!(TPG_TFO(tpg)->shutdown_session(sess))) + continue; + + spin_unlock_bh(&tpg->session_lock); + /* + * If the $FABRIC_MOD session for the Initiator Node ACL exists, + * forcefully shutdown the $FABRIC_MOD session/nexus. + */ + TPG_TFO(tpg)->close_session(sess); + + spin_lock_bh(&tpg->session_lock); + } + spin_unlock_bh(&tpg->session_lock); + + core_tpg_wait_for_nacl_pr_ref(acl); + core_tpg_wait_for_mib_ref(acl); + core_clear_initiator_node_from_tpg(acl, tpg); + core_free_device_list_for_node(acl, tpg); + + printk(KERN_INFO "%s_TPG[%hu] - Deleted ACL with TCQ Depth: %d for %s" + " Initiator Node: %s\n", TPG_TFO(tpg)->get_fabric_name(), + TPG_TFO(tpg)->tpg_get_tag(tpg), acl->queue_depth, + TPG_TFO(tpg)->get_fabric_name(), acl->initiatorname); + + return 0; +} +EXPORT_SYMBOL(core_tpg_del_initiator_node_acl); + +/* core_tpg_set_initiator_node_queue_depth(): + * + * + */ +int core_tpg_set_initiator_node_queue_depth( + struct se_portal_group *tpg, + unsigned char *initiatorname, + u32 queue_depth, + int force) +{ + struct se_session *sess, *init_sess = NULL; + struct se_node_acl *acl; + int dynamic_acl = 0; + + spin_lock_bh(&tpg->acl_node_lock); + acl = __core_tpg_get_initiator_node_acl(tpg, initiatorname); + if (!(acl)) { + printk(KERN_ERR "Access Control List entry for %s Initiator" + " Node %s does not exists for TPG %hu, ignoring" + " request.\n", TPG_TFO(tpg)->get_fabric_name(), + initiatorname, TPG_TFO(tpg)->tpg_get_tag(tpg)); + spin_unlock_bh(&tpg->acl_node_lock); + return -ENODEV; + } + if (acl->dynamic_node_acl) { + acl->dynamic_node_acl = 0; + dynamic_acl = 1; + } + spin_unlock_bh(&tpg->acl_node_lock); + + spin_lock_bh(&tpg->session_lock); + list_for_each_entry(sess, &tpg->tpg_sess_list, sess_list) { + if (sess->se_node_acl != acl) + continue; + + if (!force) { + printk(KERN_ERR "Unable to change queue depth for %s" + " Initiator Node: %s while session is" + " operational. To forcefully change the queue" + " depth and force session reinstatement" + " use the \"force=1\" parameter.\n", + TPG_TFO(tpg)->get_fabric_name(), initiatorname); + spin_unlock_bh(&tpg->session_lock); + + spin_lock_bh(&tpg->acl_node_lock); + if (dynamic_acl) + acl->dynamic_node_acl = 1; + spin_unlock_bh(&tpg->acl_node_lock); + return -EEXIST; + } + /* + * Determine if the session needs to be closed by our context. + */ + if (!(TPG_TFO(tpg)->shutdown_session(sess))) + continue; + + init_sess = sess; + break; + } + + /* + * User has requested to change the queue depth for a Initiator Node. + * Change the value in the Node's struct se_node_acl, and call + * core_set_queue_depth_for_node() to add the requested queue depth. + * + * Finally call TPG_TFO(tpg)->close_session() to force session + * reinstatement to occur if there is an active session for the + * $FABRIC_MOD Initiator Node in question. + */ + acl->queue_depth = queue_depth; + + if (core_set_queue_depth_for_node(tpg, acl) < 0) { + spin_unlock_bh(&tpg->session_lock); + /* + * Force session reinstatement if + * core_set_queue_depth_for_node() failed, because we assume + * the $FABRIC_MOD has already the set session reinstatement + * bit from TPG_TFO(tpg)->shutdown_session() called above. + */ + if (init_sess) + TPG_TFO(tpg)->close_session(init_sess); + + spin_lock_bh(&tpg->acl_node_lock); + if (dynamic_acl) + acl->dynamic_node_acl = 1; + spin_unlock_bh(&tpg->acl_node_lock); + return -EINVAL; + } + spin_unlock_bh(&tpg->session_lock); + /* + * If the $FABRIC_MOD session for the Initiator Node ACL exists, + * forcefully shutdown the $FABRIC_MOD session/nexus. + */ + if (init_sess) + TPG_TFO(tpg)->close_session(init_sess); + + printk(KERN_INFO "Successfuly changed queue depth to: %d for Initiator" + " Node: %s on %s Target Portal Group: %u\n", queue_depth, + initiatorname, TPG_TFO(tpg)->get_fabric_name(), + TPG_TFO(tpg)->tpg_get_tag(tpg)); + + spin_lock_bh(&tpg->acl_node_lock); + if (dynamic_acl) + acl->dynamic_node_acl = 1; + spin_unlock_bh(&tpg->acl_node_lock); + + return 0; +} +EXPORT_SYMBOL(core_tpg_set_initiator_node_queue_depth); + +static int core_tpg_setup_virtual_lun0(struct se_portal_group *se_tpg) +{ + /* Set in core_dev_setup_virtual_lun0() */ + struct se_device *dev = se_global->g_lun0_dev; + struct se_lun *lun = &se_tpg->tpg_virt_lun0; + u32 lun_access = TRANSPORT_LUNFLAGS_READ_ONLY; + int ret; + + lun->unpacked_lun = 0; + lun->lun_status = TRANSPORT_LUN_STATUS_FREE; + atomic_set(&lun->lun_acl_count, 0); + init_completion(&lun->lun_shutdown_comp); + INIT_LIST_HEAD(&lun->lun_acl_list); + INIT_LIST_HEAD(&lun->lun_cmd_list); + spin_lock_init(&lun->lun_acl_lock); + spin_lock_init(&lun->lun_cmd_lock); + spin_lock_init(&lun->lun_sep_lock); + + ret = core_tpg_post_addlun(se_tpg, lun, lun_access, dev); + if (ret < 0) + return -1; + + return 0; +} + +static void core_tpg_release_virtual_lun0(struct se_portal_group *se_tpg) +{ + struct se_lun *lun = &se_tpg->tpg_virt_lun0; + + core_tpg_post_dellun(se_tpg, lun); +} + +int core_tpg_register( + struct target_core_fabric_ops *tfo, + struct se_wwn *se_wwn, + struct se_portal_group *se_tpg, + void *tpg_fabric_ptr, + int se_tpg_type) +{ + struct se_lun *lun; + u32 i; + + se_tpg->tpg_lun_list = kzalloc((sizeof(struct se_lun) * + TRANSPORT_MAX_LUNS_PER_TPG), GFP_KERNEL); + if (!(se_tpg->tpg_lun_list)) { + printk(KERN_ERR "Unable to allocate struct se_portal_group->" + "tpg_lun_list\n"); + return -ENOMEM; + } + + for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) { + lun = &se_tpg->tpg_lun_list[i]; + lun->unpacked_lun = i; + lun->lun_status = TRANSPORT_LUN_STATUS_FREE; + atomic_set(&lun->lun_acl_count, 0); + init_completion(&lun->lun_shutdown_comp); + INIT_LIST_HEAD(&lun->lun_acl_list); + INIT_LIST_HEAD(&lun->lun_cmd_list); + spin_lock_init(&lun->lun_acl_lock); + spin_lock_init(&lun->lun_cmd_lock); + spin_lock_init(&lun->lun_sep_lock); + } + + se_tpg->se_tpg_type = se_tpg_type; + se_tpg->se_tpg_fabric_ptr = tpg_fabric_ptr; + se_tpg->se_tpg_tfo = tfo; + se_tpg->se_tpg_wwn = se_wwn; + atomic_set(&se_tpg->tpg_pr_ref_count, 0); + INIT_LIST_HEAD(&se_tpg->acl_node_list); + INIT_LIST_HEAD(&se_tpg->se_tpg_list); + INIT_LIST_HEAD(&se_tpg->tpg_sess_list); + spin_lock_init(&se_tpg->acl_node_lock); + spin_lock_init(&se_tpg->session_lock); + spin_lock_init(&se_tpg->tpg_lun_lock); + + if (se_tpg->se_tpg_type == TRANSPORT_TPG_TYPE_NORMAL) { + if (core_tpg_setup_virtual_lun0(se_tpg) < 0) { + kfree(se_tpg); + return -ENOMEM; + } + } + + spin_lock_bh(&se_global->se_tpg_lock); + list_add_tail(&se_tpg->se_tpg_list, &se_global->g_se_tpg_list); + spin_unlock_bh(&se_global->se_tpg_lock); + + printk(KERN_INFO "TARGET_CORE[%s]: Allocated %s struct se_portal_group for" + " endpoint: %s, Portal Tag: %u\n", tfo->get_fabric_name(), + (se_tpg->se_tpg_type == TRANSPORT_TPG_TYPE_NORMAL) ? + "Normal" : "Discovery", (tfo->tpg_get_wwn(se_tpg) == NULL) ? + "None" : tfo->tpg_get_wwn(se_tpg), tfo->tpg_get_tag(se_tpg)); + + return 0; +} +EXPORT_SYMBOL(core_tpg_register); + +int core_tpg_deregister(struct se_portal_group *se_tpg) +{ + printk(KERN_INFO "TARGET_CORE[%s]: Deallocating %s struct se_portal_group" + " for endpoint: %s Portal Tag %u\n", + (se_tpg->se_tpg_type == TRANSPORT_TPG_TYPE_NORMAL) ? + "Normal" : "Discovery", TPG_TFO(se_tpg)->get_fabric_name(), + TPG_TFO(se_tpg)->tpg_get_wwn(se_tpg), + TPG_TFO(se_tpg)->tpg_get_tag(se_tpg)); + + spin_lock_bh(&se_global->se_tpg_lock); + list_del(&se_tpg->se_tpg_list); + spin_unlock_bh(&se_global->se_tpg_lock); + + while (atomic_read(&se_tpg->tpg_pr_ref_count) != 0) + cpu_relax(); + + if (se_tpg->se_tpg_type == TRANSPORT_TPG_TYPE_NORMAL) + core_tpg_release_virtual_lun0(se_tpg); + + se_tpg->se_tpg_fabric_ptr = NULL; + kfree(se_tpg->tpg_lun_list); + return 0; +} +EXPORT_SYMBOL(core_tpg_deregister); + +struct se_lun *core_tpg_pre_addlun( + struct se_portal_group *tpg, + u32 unpacked_lun) +{ + struct se_lun *lun; + + if (unpacked_lun > (TRANSPORT_MAX_LUNS_PER_TPG-1)) { + printk(KERN_ERR "%s LUN: %u exceeds TRANSPORT_MAX_LUNS_PER_TPG" + "-1: %u for Target Portal Group: %u\n", + TPG_TFO(tpg)->get_fabric_name(), + unpacked_lun, TRANSPORT_MAX_LUNS_PER_TPG-1, + TPG_TFO(tpg)->tpg_get_tag(tpg)); + return ERR_PTR(-EOVERFLOW); + } + + spin_lock(&tpg->tpg_lun_lock); + lun = &tpg->tpg_lun_list[unpacked_lun]; + if (lun->lun_status == TRANSPORT_LUN_STATUS_ACTIVE) { + printk(KERN_ERR "TPG Logical Unit Number: %u is already active" + " on %s Target Portal Group: %u, ignoring request.\n", + unpacked_lun, TPG_TFO(tpg)->get_fabric_name(), + TPG_TFO(tpg)->tpg_get_tag(tpg)); + spin_unlock(&tpg->tpg_lun_lock); + return ERR_PTR(-EINVAL); + } + spin_unlock(&tpg->tpg_lun_lock); + + return lun; +} + +int core_tpg_post_addlun( + struct se_portal_group *tpg, + struct se_lun *lun, + u32 lun_access, + void *lun_ptr) +{ + if (core_dev_export(lun_ptr, tpg, lun) < 0) + return -1; + + spin_lock(&tpg->tpg_lun_lock); + lun->lun_access = lun_access; + lun->lun_status = TRANSPORT_LUN_STATUS_ACTIVE; + spin_unlock(&tpg->tpg_lun_lock); + + return 0; +} + +static void core_tpg_shutdown_lun( + struct se_portal_group *tpg, + struct se_lun *lun) +{ + core_clear_lun_from_tpg(lun, tpg); + transport_clear_lun_from_sessions(lun); +} + +struct se_lun *core_tpg_pre_dellun( + struct se_portal_group *tpg, + u32 unpacked_lun, + int *ret) +{ + struct se_lun *lun; + + if (unpacked_lun > (TRANSPORT_MAX_LUNS_PER_TPG-1)) { + printk(KERN_ERR "%s LUN: %u exceeds TRANSPORT_MAX_LUNS_PER_TPG" + "-1: %u for Target Portal Group: %u\n", + TPG_TFO(tpg)->get_fabric_name(), unpacked_lun, + TRANSPORT_MAX_LUNS_PER_TPG-1, + TPG_TFO(tpg)->tpg_get_tag(tpg)); + return ERR_PTR(-EOVERFLOW); + } + + spin_lock(&tpg->tpg_lun_lock); + lun = &tpg->tpg_lun_list[unpacked_lun]; + if (lun->lun_status != TRANSPORT_LUN_STATUS_ACTIVE) { + printk(KERN_ERR "%s Logical Unit Number: %u is not active on" + " Target Portal Group: %u, ignoring request.\n", + TPG_TFO(tpg)->get_fabric_name(), unpacked_lun, + TPG_TFO(tpg)->tpg_get_tag(tpg)); + spin_unlock(&tpg->tpg_lun_lock); + return ERR_PTR(-ENODEV); + } + spin_unlock(&tpg->tpg_lun_lock); + + return lun; +} + +int core_tpg_post_dellun( + struct se_portal_group *tpg, + struct se_lun *lun) +{ + core_tpg_shutdown_lun(tpg, lun); + + core_dev_unexport(lun->lun_se_dev, tpg, lun); + + spin_lock(&tpg->tpg_lun_lock); + lun->lun_status = TRANSPORT_LUN_STATUS_FREE; + spin_unlock(&tpg->tpg_lun_lock); + + return 0; +} diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c new file mode 100644 index 000000000000..28b6292ff298 --- /dev/null +++ b/drivers/target/target_core_transport.c @@ -0,0 +1,6134 @@ +/******************************************************************************* + * Filename: target_core_transport.c + * + * This file contains the Generic Target Engine Core. + * + * Copyright (c) 2002, 2003, 2004, 2005 PyX Technologies, Inc. + * Copyright (c) 2005, 2006, 2007 SBE, Inc. + * Copyright (c) 2007-2010 Rising Tide Systems + * Copyright (c) 2008-2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ******************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* For TASK_ATTR_* */ + +#include +#include +#include +#include +#include +#include +#include + +#include "target_core_alua.h" +#include "target_core_hba.h" +#include "target_core_pr.h" +#include "target_core_scdb.h" +#include "target_core_ua.h" + +/* #define DEBUG_CDB_HANDLER */ +#ifdef DEBUG_CDB_HANDLER +#define DEBUG_CDB_H(x...) printk(KERN_INFO x) +#else +#define DEBUG_CDB_H(x...) +#endif + +/* #define DEBUG_CMD_MAP */ +#ifdef DEBUG_CMD_MAP +#define DEBUG_CMD_M(x...) printk(KERN_INFO x) +#else +#define DEBUG_CMD_M(x...) +#endif + +/* #define DEBUG_MEM_ALLOC */ +#ifdef DEBUG_MEM_ALLOC +#define DEBUG_MEM(x...) printk(KERN_INFO x) +#else +#define DEBUG_MEM(x...) +#endif + +/* #define DEBUG_MEM2_ALLOC */ +#ifdef DEBUG_MEM2_ALLOC +#define DEBUG_MEM2(x...) printk(KERN_INFO x) +#else +#define DEBUG_MEM2(x...) +#endif + +/* #define DEBUG_SG_CALC */ +#ifdef DEBUG_SG_CALC +#define DEBUG_SC(x...) printk(KERN_INFO x) +#else +#define DEBUG_SC(x...) +#endif + +/* #define DEBUG_SE_OBJ */ +#ifdef DEBUG_SE_OBJ +#define DEBUG_SO(x...) printk(KERN_INFO x) +#else +#define DEBUG_SO(x...) +#endif + +/* #define DEBUG_CMD_VOL */ +#ifdef DEBUG_CMD_VOL +#define DEBUG_VOL(x...) printk(KERN_INFO x) +#else +#define DEBUG_VOL(x...) +#endif + +/* #define DEBUG_CMD_STOP */ +#ifdef DEBUG_CMD_STOP +#define DEBUG_CS(x...) printk(KERN_INFO x) +#else +#define DEBUG_CS(x...) +#endif + +/* #define DEBUG_PASSTHROUGH */ +#ifdef DEBUG_PASSTHROUGH +#define DEBUG_PT(x...) printk(KERN_INFO x) +#else +#define DEBUG_PT(x...) +#endif + +/* #define DEBUG_TASK_STOP */ +#ifdef DEBUG_TASK_STOP +#define DEBUG_TS(x...) printk(KERN_INFO x) +#else +#define DEBUG_TS(x...) +#endif + +/* #define DEBUG_TRANSPORT_STOP */ +#ifdef DEBUG_TRANSPORT_STOP +#define DEBUG_TRANSPORT_S(x...) printk(KERN_INFO x) +#else +#define DEBUG_TRANSPORT_S(x...) +#endif + +/* #define DEBUG_TASK_FAILURE */ +#ifdef DEBUG_TASK_FAILURE +#define DEBUG_TF(x...) printk(KERN_INFO x) +#else +#define DEBUG_TF(x...) +#endif + +/* #define DEBUG_DEV_OFFLINE */ +#ifdef DEBUG_DEV_OFFLINE +#define DEBUG_DO(x...) printk(KERN_INFO x) +#else +#define DEBUG_DO(x...) +#endif + +/* #define DEBUG_TASK_STATE */ +#ifdef DEBUG_TASK_STATE +#define DEBUG_TSTATE(x...) printk(KERN_INFO x) +#else +#define DEBUG_TSTATE(x...) +#endif + +/* #define DEBUG_STATUS_THR */ +#ifdef DEBUG_STATUS_THR +#define DEBUG_ST(x...) printk(KERN_INFO x) +#else +#define DEBUG_ST(x...) +#endif + +/* #define DEBUG_TASK_TIMEOUT */ +#ifdef DEBUG_TASK_TIMEOUT +#define DEBUG_TT(x...) printk(KERN_INFO x) +#else +#define DEBUG_TT(x...) +#endif + +/* #define DEBUG_GENERIC_REQUEST_FAILURE */ +#ifdef DEBUG_GENERIC_REQUEST_FAILURE +#define DEBUG_GRF(x...) printk(KERN_INFO x) +#else +#define DEBUG_GRF(x...) +#endif + +/* #define DEBUG_SAM_TASK_ATTRS */ +#ifdef DEBUG_SAM_TASK_ATTRS +#define DEBUG_STA(x...) printk(KERN_INFO x) +#else +#define DEBUG_STA(x...) +#endif + +struct se_global *se_global; + +static struct kmem_cache *se_cmd_cache; +static struct kmem_cache *se_sess_cache; +struct kmem_cache *se_tmr_req_cache; +struct kmem_cache *se_ua_cache; +struct kmem_cache *se_mem_cache; +struct kmem_cache *t10_pr_reg_cache; +struct kmem_cache *t10_alua_lu_gp_cache; +struct kmem_cache *t10_alua_lu_gp_mem_cache; +struct kmem_cache *t10_alua_tg_pt_gp_cache; +struct kmem_cache *t10_alua_tg_pt_gp_mem_cache; + +/* Used for transport_dev_get_map_*() */ +typedef int (*map_func_t)(struct se_task *, u32); + +static int transport_generic_write_pending(struct se_cmd *); +static int transport_processing_thread(void *); +static int __transport_execute_tasks(struct se_device *dev); +static void transport_complete_task_attr(struct se_cmd *cmd); +static void transport_direct_request_timeout(struct se_cmd *cmd); +static void transport_free_dev_tasks(struct se_cmd *cmd); +static u32 transport_generic_get_cdb_count(struct se_cmd *cmd, + unsigned long long starting_lba, u32 sectors, + enum dma_data_direction data_direction, + struct list_head *mem_list, int set_counts); +static int transport_generic_get_mem(struct se_cmd *cmd, u32 length, + u32 dma_size); +static int transport_generic_remove(struct se_cmd *cmd, + int release_to_pool, int session_reinstatement); +static int transport_get_sectors(struct se_cmd *cmd); +static struct list_head *transport_init_se_mem_list(void); +static int transport_map_sg_to_mem(struct se_cmd *cmd, + struct list_head *se_mem_list, void *in_mem, + u32 *se_mem_cnt); +static void transport_memcpy_se_mem_read_contig(struct se_cmd *cmd, + unsigned char *dst, struct list_head *se_mem_list); +static void transport_release_fe_cmd(struct se_cmd *cmd); +static void transport_remove_cmd_from_queue(struct se_cmd *cmd, + struct se_queue_obj *qobj); +static int transport_set_sense_codes(struct se_cmd *cmd, u8 asc, u8 ascq); +static void transport_stop_all_task_timers(struct se_cmd *cmd); + +int transport_emulate_control_cdb(struct se_task *task); + +int init_se_global(void) +{ + struct se_global *global; + + global = kzalloc(sizeof(struct se_global), GFP_KERNEL); + if (!(global)) { + printk(KERN_ERR "Unable to allocate memory for struct se_global\n"); + return -1; + } + + INIT_LIST_HEAD(&global->g_lu_gps_list); + INIT_LIST_HEAD(&global->g_se_tpg_list); + INIT_LIST_HEAD(&global->g_hba_list); + INIT_LIST_HEAD(&global->g_se_dev_list); + spin_lock_init(&global->g_device_lock); + spin_lock_init(&global->hba_lock); + spin_lock_init(&global->se_tpg_lock); + spin_lock_init(&global->lu_gps_lock); + spin_lock_init(&global->plugin_class_lock); + + se_cmd_cache = kmem_cache_create("se_cmd_cache", + sizeof(struct se_cmd), __alignof__(struct se_cmd), 0, NULL); + if (!(se_cmd_cache)) { + printk(KERN_ERR "kmem_cache_create for struct se_cmd failed\n"); + goto out; + } + se_tmr_req_cache = kmem_cache_create("se_tmr_cache", + sizeof(struct se_tmr_req), __alignof__(struct se_tmr_req), + 0, NULL); + if (!(se_tmr_req_cache)) { + printk(KERN_ERR "kmem_cache_create() for struct se_tmr_req" + " failed\n"); + goto out; + } + se_sess_cache = kmem_cache_create("se_sess_cache", + sizeof(struct se_session), __alignof__(struct se_session), + 0, NULL); + if (!(se_sess_cache)) { + printk(KERN_ERR "kmem_cache_create() for struct se_session" + " failed\n"); + goto out; + } + se_ua_cache = kmem_cache_create("se_ua_cache", + sizeof(struct se_ua), __alignof__(struct se_ua), + 0, NULL); + if (!(se_ua_cache)) { + printk(KERN_ERR "kmem_cache_create() for struct se_ua failed\n"); + goto out; + } + se_mem_cache = kmem_cache_create("se_mem_cache", + sizeof(struct se_mem), __alignof__(struct se_mem), 0, NULL); + if (!(se_mem_cache)) { + printk(KERN_ERR "kmem_cache_create() for struct se_mem failed\n"); + goto out; + } + t10_pr_reg_cache = kmem_cache_create("t10_pr_reg_cache", + sizeof(struct t10_pr_registration), + __alignof__(struct t10_pr_registration), 0, NULL); + if (!(t10_pr_reg_cache)) { + printk(KERN_ERR "kmem_cache_create() for struct t10_pr_registration" + " failed\n"); + goto out; + } + t10_alua_lu_gp_cache = kmem_cache_create("t10_alua_lu_gp_cache", + sizeof(struct t10_alua_lu_gp), __alignof__(struct t10_alua_lu_gp), + 0, NULL); + if (!(t10_alua_lu_gp_cache)) { + printk(KERN_ERR "kmem_cache_create() for t10_alua_lu_gp_cache" + " failed\n"); + goto out; + } + t10_alua_lu_gp_mem_cache = kmem_cache_create("t10_alua_lu_gp_mem_cache", + sizeof(struct t10_alua_lu_gp_member), + __alignof__(struct t10_alua_lu_gp_member), 0, NULL); + if (!(t10_alua_lu_gp_mem_cache)) { + printk(KERN_ERR "kmem_cache_create() for t10_alua_lu_gp_mem_" + "cache failed\n"); + goto out; + } + t10_alua_tg_pt_gp_cache = kmem_cache_create("t10_alua_tg_pt_gp_cache", + sizeof(struct t10_alua_tg_pt_gp), + __alignof__(struct t10_alua_tg_pt_gp), 0, NULL); + if (!(t10_alua_tg_pt_gp_cache)) { + printk(KERN_ERR "kmem_cache_create() for t10_alua_tg_pt_gp_" + "cache failed\n"); + goto out; + } + t10_alua_tg_pt_gp_mem_cache = kmem_cache_create( + "t10_alua_tg_pt_gp_mem_cache", + sizeof(struct t10_alua_tg_pt_gp_member), + __alignof__(struct t10_alua_tg_pt_gp_member), + 0, NULL); + if (!(t10_alua_tg_pt_gp_mem_cache)) { + printk(KERN_ERR "kmem_cache_create() for t10_alua_tg_pt_gp_" + "mem_t failed\n"); + goto out; + } + + se_global = global; + + return 0; +out: + if (se_cmd_cache) + kmem_cache_destroy(se_cmd_cache); + if (se_tmr_req_cache) + kmem_cache_destroy(se_tmr_req_cache); + if (se_sess_cache) + kmem_cache_destroy(se_sess_cache); + if (se_ua_cache) + kmem_cache_destroy(se_ua_cache); + if (se_mem_cache) + kmem_cache_destroy(se_mem_cache); + if (t10_pr_reg_cache) + kmem_cache_destroy(t10_pr_reg_cache); + if (t10_alua_lu_gp_cache) + kmem_cache_destroy(t10_alua_lu_gp_cache); + if (t10_alua_lu_gp_mem_cache) + kmem_cache_destroy(t10_alua_lu_gp_mem_cache); + if (t10_alua_tg_pt_gp_cache) + kmem_cache_destroy(t10_alua_tg_pt_gp_cache); + if (t10_alua_tg_pt_gp_mem_cache) + kmem_cache_destroy(t10_alua_tg_pt_gp_mem_cache); + kfree(global); + return -1; +} + +void release_se_global(void) +{ + struct se_global *global; + + global = se_global; + if (!(global)) + return; + + kmem_cache_destroy(se_cmd_cache); + kmem_cache_destroy(se_tmr_req_cache); + kmem_cache_destroy(se_sess_cache); + kmem_cache_destroy(se_ua_cache); + kmem_cache_destroy(se_mem_cache); + kmem_cache_destroy(t10_pr_reg_cache); + kmem_cache_destroy(t10_alua_lu_gp_cache); + kmem_cache_destroy(t10_alua_lu_gp_mem_cache); + kmem_cache_destroy(t10_alua_tg_pt_gp_cache); + kmem_cache_destroy(t10_alua_tg_pt_gp_mem_cache); + kfree(global); + + se_global = NULL; +} + +void transport_init_queue_obj(struct se_queue_obj *qobj) +{ + atomic_set(&qobj->queue_cnt, 0); + INIT_LIST_HEAD(&qobj->qobj_list); + init_waitqueue_head(&qobj->thread_wq); + spin_lock_init(&qobj->cmd_queue_lock); +} +EXPORT_SYMBOL(transport_init_queue_obj); + +static int transport_subsystem_reqmods(void) +{ + int ret; + + ret = request_module("target_core_iblock"); + if (ret != 0) + printk(KERN_ERR "Unable to load target_core_iblock\n"); + + ret = request_module("target_core_file"); + if (ret != 0) + printk(KERN_ERR "Unable to load target_core_file\n"); + + ret = request_module("target_core_pscsi"); + if (ret != 0) + printk(KERN_ERR "Unable to load target_core_pscsi\n"); + + ret = request_module("target_core_stgt"); + if (ret != 0) + printk(KERN_ERR "Unable to load target_core_stgt\n"); + + return 0; +} + +int transport_subsystem_check_init(void) +{ + if (se_global->g_sub_api_initialized) + return 0; + /* + * Request the loading of known TCM subsystem plugins.. + */ + if (transport_subsystem_reqmods() < 0) + return -1; + + se_global->g_sub_api_initialized = 1; + return 0; +} + +struct se_session *transport_init_session(void) +{ + struct se_session *se_sess; + + se_sess = kmem_cache_zalloc(se_sess_cache, GFP_KERNEL); + if (!(se_sess)) { + printk(KERN_ERR "Unable to allocate struct se_session from" + " se_sess_cache\n"); + return ERR_PTR(-ENOMEM); + } + INIT_LIST_HEAD(&se_sess->sess_list); + INIT_LIST_HEAD(&se_sess->sess_acl_list); + atomic_set(&se_sess->mib_ref_count, 0); + + return se_sess; +} +EXPORT_SYMBOL(transport_init_session); + +/* + * Called with spin_lock_bh(&struct se_portal_group->session_lock called. + */ +void __transport_register_session( + struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl, + struct se_session *se_sess, + void *fabric_sess_ptr) +{ + unsigned char buf[PR_REG_ISID_LEN]; + + se_sess->se_tpg = se_tpg; + se_sess->fabric_sess_ptr = fabric_sess_ptr; + /* + * Used by struct se_node_acl's under ConfigFS to locate active se_session-t + * + * Only set for struct se_session's that will actually be moving I/O. + * eg: *NOT* discovery sessions. + */ + if (se_nacl) { + /* + * If the fabric module supports an ISID based TransportID, + * save this value in binary from the fabric I_T Nexus now. + */ + if (TPG_TFO(se_tpg)->sess_get_initiator_sid != NULL) { + memset(&buf[0], 0, PR_REG_ISID_LEN); + TPG_TFO(se_tpg)->sess_get_initiator_sid(se_sess, + &buf[0], PR_REG_ISID_LEN); + se_sess->sess_bin_isid = get_unaligned_be64(&buf[0]); + } + spin_lock_irq(&se_nacl->nacl_sess_lock); + /* + * The se_nacl->nacl_sess pointer will be set to the + * last active I_T Nexus for each struct se_node_acl. + */ + se_nacl->nacl_sess = se_sess; + + list_add_tail(&se_sess->sess_acl_list, + &se_nacl->acl_sess_list); + spin_unlock_irq(&se_nacl->nacl_sess_lock); + } + list_add_tail(&se_sess->sess_list, &se_tpg->tpg_sess_list); + + printk(KERN_INFO "TARGET_CORE[%s]: Registered fabric_sess_ptr: %p\n", + TPG_TFO(se_tpg)->get_fabric_name(), se_sess->fabric_sess_ptr); +} +EXPORT_SYMBOL(__transport_register_session); + +void transport_register_session( + struct se_portal_group *se_tpg, + struct se_node_acl *se_nacl, + struct se_session *se_sess, + void *fabric_sess_ptr) +{ + spin_lock_bh(&se_tpg->session_lock); + __transport_register_session(se_tpg, se_nacl, se_sess, fabric_sess_ptr); + spin_unlock_bh(&se_tpg->session_lock); +} +EXPORT_SYMBOL(transport_register_session); + +void transport_deregister_session_configfs(struct se_session *se_sess) +{ + struct se_node_acl *se_nacl; + + /* + * Used by struct se_node_acl's under ConfigFS to locate active struct se_session + */ + se_nacl = se_sess->se_node_acl; + if ((se_nacl)) { + spin_lock_irq(&se_nacl->nacl_sess_lock); + list_del(&se_sess->sess_acl_list); + /* + * If the session list is empty, then clear the pointer. + * Otherwise, set the struct se_session pointer from the tail + * element of the per struct se_node_acl active session list. + */ + if (list_empty(&se_nacl->acl_sess_list)) + se_nacl->nacl_sess = NULL; + else { + se_nacl->nacl_sess = container_of( + se_nacl->acl_sess_list.prev, + struct se_session, sess_acl_list); + } + spin_unlock_irq(&se_nacl->nacl_sess_lock); + } +} +EXPORT_SYMBOL(transport_deregister_session_configfs); + +void transport_free_session(struct se_session *se_sess) +{ + kmem_cache_free(se_sess_cache, se_sess); +} +EXPORT_SYMBOL(transport_free_session); + +void transport_deregister_session(struct se_session *se_sess) +{ + struct se_portal_group *se_tpg = se_sess->se_tpg; + struct se_node_acl *se_nacl; + + if (!(se_tpg)) { + transport_free_session(se_sess); + return; + } + /* + * Wait for possible reference in drivers/target/target_core_mib.c: + * scsi_att_intr_port_seq_show() + */ + while (atomic_read(&se_sess->mib_ref_count) != 0) + cpu_relax(); + + spin_lock_bh(&se_tpg->session_lock); + list_del(&se_sess->sess_list); + se_sess->se_tpg = NULL; + se_sess->fabric_sess_ptr = NULL; + spin_unlock_bh(&se_tpg->session_lock); + + /* + * Determine if we need to do extra work for this initiator node's + * struct se_node_acl if it had been previously dynamically generated. + */ + se_nacl = se_sess->se_node_acl; + if ((se_nacl)) { + spin_lock_bh(&se_tpg->acl_node_lock); + if (se_nacl->dynamic_node_acl) { + if (!(TPG_TFO(se_tpg)->tpg_check_demo_mode_cache( + se_tpg))) { + list_del(&se_nacl->acl_list); + se_tpg->num_node_acls--; + spin_unlock_bh(&se_tpg->acl_node_lock); + + core_tpg_wait_for_nacl_pr_ref(se_nacl); + core_tpg_wait_for_mib_ref(se_nacl); + core_free_device_list_for_node(se_nacl, se_tpg); + TPG_TFO(se_tpg)->tpg_release_fabric_acl(se_tpg, + se_nacl); + spin_lock_bh(&se_tpg->acl_node_lock); + } + } + spin_unlock_bh(&se_tpg->acl_node_lock); + } + + transport_free_session(se_sess); + + printk(KERN_INFO "TARGET_CORE[%s]: Deregistered fabric_sess\n", + TPG_TFO(se_tpg)->get_fabric_name()); +} +EXPORT_SYMBOL(transport_deregister_session); + +/* + * Called with T_TASK(cmd)->t_state_lock held. + */ +static void transport_all_task_dev_remove_state(struct se_cmd *cmd) +{ + struct se_device *dev; + struct se_task *task; + unsigned long flags; + + if (!T_TASK(cmd)) + return; + + list_for_each_entry(task, &T_TASK(cmd)->t_task_list, t_list) { + dev = task->se_dev; + if (!(dev)) + continue; + + if (atomic_read(&task->task_active)) + continue; + + if (!(atomic_read(&task->task_state_active))) + continue; + + spin_lock_irqsave(&dev->execute_task_lock, flags); + list_del(&task->t_state_list); + DEBUG_TSTATE("Removed ITT: 0x%08x dev: %p task[%p]\n", + CMD_TFO(cmd)->tfo_get_task_tag(cmd), dev, task); + spin_unlock_irqrestore(&dev->execute_task_lock, flags); + + atomic_set(&task->task_state_active, 0); + atomic_dec(&T_TASK(cmd)->t_task_cdbs_ex_left); + } +} + +/* transport_cmd_check_stop(): + * + * 'transport_off = 1' determines if t_transport_active should be cleared. + * 'transport_off = 2' determines if task_dev_state should be removed. + * + * A non-zero u8 t_state sets cmd->t_state. + * Returns 1 when command is stopped, else 0. + */ +static int transport_cmd_check_stop( + struct se_cmd *cmd, + int transport_off, + u8 t_state) +{ + unsigned long flags; + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + /* + * Determine if IOCTL context caller in requesting the stopping of this + * command for LUN shutdown purposes. + */ + if (atomic_read(&T_TASK(cmd)->transport_lun_stop)) { + DEBUG_CS("%s:%d atomic_read(&T_TASK(cmd)->transport_lun_stop)" + " == TRUE for ITT: 0x%08x\n", __func__, __LINE__, + CMD_TFO(cmd)->get_task_tag(cmd)); + + cmd->deferred_t_state = cmd->t_state; + cmd->t_state = TRANSPORT_DEFERRED_CMD; + atomic_set(&T_TASK(cmd)->t_transport_active, 0); + if (transport_off == 2) + transport_all_task_dev_remove_state(cmd); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + complete(&T_TASK(cmd)->transport_lun_stop_comp); + return 1; + } + /* + * Determine if frontend context caller is requesting the stopping of + * this command for frontend excpections. + */ + if (atomic_read(&T_TASK(cmd)->t_transport_stop)) { + DEBUG_CS("%s:%d atomic_read(&T_TASK(cmd)->t_transport_stop) ==" + " TRUE for ITT: 0x%08x\n", __func__, __LINE__, + CMD_TFO(cmd)->get_task_tag(cmd)); + + cmd->deferred_t_state = cmd->t_state; + cmd->t_state = TRANSPORT_DEFERRED_CMD; + if (transport_off == 2) + transport_all_task_dev_remove_state(cmd); + + /* + * Clear struct se_cmd->se_lun before the transport_off == 2 handoff + * to FE. + */ + if (transport_off == 2) + cmd->se_lun = NULL; + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + complete(&T_TASK(cmd)->t_transport_stop_comp); + return 1; + } + if (transport_off) { + atomic_set(&T_TASK(cmd)->t_transport_active, 0); + if (transport_off == 2) { + transport_all_task_dev_remove_state(cmd); + /* + * Clear struct se_cmd->se_lun before the transport_off == 2 + * handoff to fabric module. + */ + cmd->se_lun = NULL; + /* + * Some fabric modules like tcm_loop can release + * their internally allocated I/O refrence now and + * struct se_cmd now. + */ + if (CMD_TFO(cmd)->check_stop_free != NULL) { + spin_unlock_irqrestore( + &T_TASK(cmd)->t_state_lock, flags); + + CMD_TFO(cmd)->check_stop_free(cmd); + return 1; + } + } + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + return 0; + } else if (t_state) + cmd->t_state = t_state; + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + return 0; +} + +static int transport_cmd_check_stop_to_fabric(struct se_cmd *cmd) +{ + return transport_cmd_check_stop(cmd, 2, 0); +} + +static void transport_lun_remove_cmd(struct se_cmd *cmd) +{ + struct se_lun *lun = SE_LUN(cmd); + unsigned long flags; + + if (!lun) + return; + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + if (!(atomic_read(&T_TASK(cmd)->transport_dev_active))) { + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + goto check_lun; + } + atomic_set(&T_TASK(cmd)->transport_dev_active, 0); + transport_all_task_dev_remove_state(cmd); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + transport_free_dev_tasks(cmd); + +check_lun: + spin_lock_irqsave(&lun->lun_cmd_lock, flags); + if (atomic_read(&T_TASK(cmd)->transport_lun_active)) { + list_del(&cmd->se_lun_list); + atomic_set(&T_TASK(cmd)->transport_lun_active, 0); +#if 0 + printk(KERN_INFO "Removed ITT: 0x%08x from LUN LIST[%d]\n" + CMD_TFO(cmd)->get_task_tag(cmd), lun->unpacked_lun); +#endif + } + spin_unlock_irqrestore(&lun->lun_cmd_lock, flags); +} + +void transport_cmd_finish_abort(struct se_cmd *cmd, int remove) +{ + transport_remove_cmd_from_queue(cmd, SE_DEV(cmd)->dev_queue_obj); + transport_lun_remove_cmd(cmd); + + if (transport_cmd_check_stop_to_fabric(cmd)) + return; + if (remove) + transport_generic_remove(cmd, 0, 0); +} + +void transport_cmd_finish_abort_tmr(struct se_cmd *cmd) +{ + transport_remove_cmd_from_queue(cmd, SE_DEV(cmd)->dev_queue_obj); + + if (transport_cmd_check_stop_to_fabric(cmd)) + return; + + transport_generic_remove(cmd, 0, 0); +} + +static int transport_add_cmd_to_queue( + struct se_cmd *cmd, + int t_state) +{ + struct se_device *dev = cmd->se_dev; + struct se_queue_obj *qobj = dev->dev_queue_obj; + struct se_queue_req *qr; + unsigned long flags; + + qr = kzalloc(sizeof(struct se_queue_req), GFP_ATOMIC); + if (!(qr)) { + printk(KERN_ERR "Unable to allocate memory for" + " struct se_queue_req\n"); + return -1; + } + INIT_LIST_HEAD(&qr->qr_list); + + qr->cmd = (void *)cmd; + qr->state = t_state; + + if (t_state) { + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + cmd->t_state = t_state; + atomic_set(&T_TASK(cmd)->t_transport_active, 1); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + } + + spin_lock_irqsave(&qobj->cmd_queue_lock, flags); + list_add_tail(&qr->qr_list, &qobj->qobj_list); + atomic_inc(&T_TASK(cmd)->t_transport_queue_active); + spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags); + + atomic_inc(&qobj->queue_cnt); + wake_up_interruptible(&qobj->thread_wq); + return 0; +} + +/* + * Called with struct se_queue_obj->cmd_queue_lock held. + */ +static struct se_queue_req * +__transport_get_qr_from_queue(struct se_queue_obj *qobj) +{ + struct se_cmd *cmd; + struct se_queue_req *qr = NULL; + + if (list_empty(&qobj->qobj_list)) + return NULL; + + list_for_each_entry(qr, &qobj->qobj_list, qr_list) + break; + + if (qr->cmd) { + cmd = (struct se_cmd *)qr->cmd; + atomic_dec(&T_TASK(cmd)->t_transport_queue_active); + } + list_del(&qr->qr_list); + atomic_dec(&qobj->queue_cnt); + + return qr; +} + +static struct se_queue_req * +transport_get_qr_from_queue(struct se_queue_obj *qobj) +{ + struct se_cmd *cmd; + struct se_queue_req *qr; + unsigned long flags; + + spin_lock_irqsave(&qobj->cmd_queue_lock, flags); + if (list_empty(&qobj->qobj_list)) { + spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags); + return NULL; + } + + list_for_each_entry(qr, &qobj->qobj_list, qr_list) + break; + + if (qr->cmd) { + cmd = (struct se_cmd *)qr->cmd; + atomic_dec(&T_TASK(cmd)->t_transport_queue_active); + } + list_del(&qr->qr_list); + atomic_dec(&qobj->queue_cnt); + spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags); + + return qr; +} + +static void transport_remove_cmd_from_queue(struct se_cmd *cmd, + struct se_queue_obj *qobj) +{ + struct se_cmd *q_cmd; + struct se_queue_req *qr = NULL, *qr_p = NULL; + unsigned long flags; + + spin_lock_irqsave(&qobj->cmd_queue_lock, flags); + if (!(atomic_read(&T_TASK(cmd)->t_transport_queue_active))) { + spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags); + return; + } + + list_for_each_entry_safe(qr, qr_p, &qobj->qobj_list, qr_list) { + q_cmd = (struct se_cmd *)qr->cmd; + if (q_cmd != cmd) + continue; + + atomic_dec(&T_TASK(q_cmd)->t_transport_queue_active); + atomic_dec(&qobj->queue_cnt); + list_del(&qr->qr_list); + kfree(qr); + } + spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags); + + if (atomic_read(&T_TASK(cmd)->t_transport_queue_active)) { + printk(KERN_ERR "ITT: 0x%08x t_transport_queue_active: %d\n", + CMD_TFO(cmd)->get_task_tag(cmd), + atomic_read(&T_TASK(cmd)->t_transport_queue_active)); + } +} + +/* + * Completion function used by TCM subsystem plugins (such as FILEIO) + * for queueing up response from struct se_subsystem_api->do_task() + */ +void transport_complete_sync_cache(struct se_cmd *cmd, int good) +{ + struct se_task *task = list_entry(T_TASK(cmd)->t_task_list.next, + struct se_task, t_list); + + if (good) { + cmd->scsi_status = SAM_STAT_GOOD; + task->task_scsi_status = GOOD; + } else { + task->task_scsi_status = SAM_STAT_CHECK_CONDITION; + task->task_error_status = PYX_TRANSPORT_ILLEGAL_REQUEST; + TASK_CMD(task)->transport_error_status = + PYX_TRANSPORT_ILLEGAL_REQUEST; + } + + transport_complete_task(task, good); +} +EXPORT_SYMBOL(transport_complete_sync_cache); + +/* transport_complete_task(): + * + * Called from interrupt and non interrupt context depending + * on the transport plugin. + */ +void transport_complete_task(struct se_task *task, int success) +{ + struct se_cmd *cmd = TASK_CMD(task); + struct se_device *dev = task->se_dev; + int t_state; + unsigned long flags; +#if 0 + printk(KERN_INFO "task: %p CDB: 0x%02x obj_ptr: %p\n", task, + T_TASK(cmd)->t_task_cdb[0], dev); +#endif + if (dev) { + spin_lock_irqsave(&SE_HBA(dev)->hba_queue_lock, flags); + atomic_inc(&dev->depth_left); + atomic_inc(&SE_HBA(dev)->left_queue_depth); + spin_unlock_irqrestore(&SE_HBA(dev)->hba_queue_lock, flags); + } + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + atomic_set(&task->task_active, 0); + + /* + * See if any sense data exists, if so set the TASK_SENSE flag. + * Also check for any other post completion work that needs to be + * done by the plugins. + */ + if (dev && dev->transport->transport_complete) { + if (dev->transport->transport_complete(task) != 0) { + cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE; + task->task_sense = 1; + success = 1; + } + } + + /* + * See if we are waiting for outstanding struct se_task + * to complete for an exception condition + */ + if (atomic_read(&task->task_stop)) { + /* + * Decrement T_TASK(cmd)->t_se_count if this task had + * previously thrown its timeout exception handler. + */ + if (atomic_read(&task->task_timeout)) { + atomic_dec(&T_TASK(cmd)->t_se_count); + atomic_set(&task->task_timeout, 0); + } + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + complete(&task->task_stop_comp); + return; + } + /* + * If the task's timeout handler has fired, use the t_task_cdbs_timeout + * left counter to determine when the struct se_cmd is ready to be queued to + * the processing thread. + */ + if (atomic_read(&task->task_timeout)) { + if (!(atomic_dec_and_test( + &T_TASK(cmd)->t_task_cdbs_timeout_left))) { + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, + flags); + return; + } + t_state = TRANSPORT_COMPLETE_TIMEOUT; + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + transport_add_cmd_to_queue(cmd, t_state); + return; + } + atomic_dec(&T_TASK(cmd)->t_task_cdbs_timeout_left); + + /* + * Decrement the outstanding t_task_cdbs_left count. The last + * struct se_task from struct se_cmd will complete itself into the + * device queue depending upon int success. + */ + if (!(atomic_dec_and_test(&T_TASK(cmd)->t_task_cdbs_left))) { + if (!success) + T_TASK(cmd)->t_tasks_failed = 1; + + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + return; + } + + if (!success || T_TASK(cmd)->t_tasks_failed) { + t_state = TRANSPORT_COMPLETE_FAILURE; + if (!task->task_error_status) { + task->task_error_status = + PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->transport_error_status = + PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + } + } else { + atomic_set(&T_TASK(cmd)->t_transport_complete, 1); + t_state = TRANSPORT_COMPLETE_OK; + } + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + transport_add_cmd_to_queue(cmd, t_state); +} +EXPORT_SYMBOL(transport_complete_task); + +/* + * Called by transport_add_tasks_from_cmd() once a struct se_cmd's + * struct se_task list are ready to be added to the active execution list + * struct se_device + + * Called with se_dev_t->execute_task_lock called. + */ +static inline int transport_add_task_check_sam_attr( + struct se_task *task, + struct se_task *task_prev, + struct se_device *dev) +{ + /* + * No SAM Task attribute emulation enabled, add to tail of + * execution queue + */ + if (dev->dev_task_attr_type != SAM_TASK_ATTR_EMULATED) { + list_add_tail(&task->t_execute_list, &dev->execute_task_list); + return 0; + } + /* + * HEAD_OF_QUEUE attribute for received CDB, which means + * the first task that is associated with a struct se_cmd goes to + * head of the struct se_device->execute_task_list, and task_prev + * after that for each subsequent task + */ + if (task->task_se_cmd->sam_task_attr == TASK_ATTR_HOQ) { + list_add(&task->t_execute_list, + (task_prev != NULL) ? + &task_prev->t_execute_list : + &dev->execute_task_list); + + DEBUG_STA("Set HEAD_OF_QUEUE for task CDB: 0x%02x" + " in execution queue\n", + T_TASK(task->task_se_cmd)->t_task_cdb[0]); + return 1; + } + /* + * For ORDERED, SIMPLE or UNTAGGED attribute tasks once they have been + * transitioned from Dermant -> Active state, and are added to the end + * of the struct se_device->execute_task_list + */ + list_add_tail(&task->t_execute_list, &dev->execute_task_list); + return 0; +} + +/* __transport_add_task_to_execute_queue(): + * + * Called with se_dev_t->execute_task_lock called. + */ +static void __transport_add_task_to_execute_queue( + struct se_task *task, + struct se_task *task_prev, + struct se_device *dev) +{ + int head_of_queue; + + head_of_queue = transport_add_task_check_sam_attr(task, task_prev, dev); + atomic_inc(&dev->execute_tasks); + + if (atomic_read(&task->task_state_active)) + return; + /* + * Determine if this task needs to go to HEAD_OF_QUEUE for the + * state list as well. Running with SAM Task Attribute emulation + * will always return head_of_queue == 0 here + */ + if (head_of_queue) + list_add(&task->t_state_list, (task_prev) ? + &task_prev->t_state_list : + &dev->state_task_list); + else + list_add_tail(&task->t_state_list, &dev->state_task_list); + + atomic_set(&task->task_state_active, 1); + + DEBUG_TSTATE("Added ITT: 0x%08x task[%p] to dev: %p\n", + CMD_TFO(task->task_se_cmd)->get_task_tag(task->task_se_cmd), + task, dev); +} + +static void transport_add_tasks_to_state_queue(struct se_cmd *cmd) +{ + struct se_device *dev; + struct se_task *task; + unsigned long flags; + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + list_for_each_entry(task, &T_TASK(cmd)->t_task_list, t_list) { + dev = task->se_dev; + + if (atomic_read(&task->task_state_active)) + continue; + + spin_lock(&dev->execute_task_lock); + list_add_tail(&task->t_state_list, &dev->state_task_list); + atomic_set(&task->task_state_active, 1); + + DEBUG_TSTATE("Added ITT: 0x%08x task[%p] to dev: %p\n", + CMD_TFO(task->task_se_cmd)->get_task_tag( + task->task_se_cmd), task, dev); + + spin_unlock(&dev->execute_task_lock); + } + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); +} + +static void transport_add_tasks_from_cmd(struct se_cmd *cmd) +{ + struct se_device *dev = SE_DEV(cmd); + struct se_task *task, *task_prev = NULL; + unsigned long flags; + + spin_lock_irqsave(&dev->execute_task_lock, flags); + list_for_each_entry(task, &T_TASK(cmd)->t_task_list, t_list) { + if (atomic_read(&task->task_execute_queue)) + continue; + /* + * __transport_add_task_to_execute_queue() handles the + * SAM Task Attribute emulation if enabled + */ + __transport_add_task_to_execute_queue(task, task_prev, dev); + atomic_set(&task->task_execute_queue, 1); + task_prev = task; + } + spin_unlock_irqrestore(&dev->execute_task_lock, flags); + + return; +} + +/* transport_get_task_from_execute_queue(): + * + * Called with dev->execute_task_lock held. + */ +static struct se_task * +transport_get_task_from_execute_queue(struct se_device *dev) +{ + struct se_task *task; + + if (list_empty(&dev->execute_task_list)) + return NULL; + + list_for_each_entry(task, &dev->execute_task_list, t_execute_list) + break; + + list_del(&task->t_execute_list); + atomic_dec(&dev->execute_tasks); + + return task; +} + +/* transport_remove_task_from_execute_queue(): + * + * + */ +static void transport_remove_task_from_execute_queue( + struct se_task *task, + struct se_device *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&dev->execute_task_lock, flags); + list_del(&task->t_execute_list); + atomic_dec(&dev->execute_tasks); + spin_unlock_irqrestore(&dev->execute_task_lock, flags); +} + +unsigned char *transport_dump_cmd_direction(struct se_cmd *cmd) +{ + switch (cmd->data_direction) { + case DMA_NONE: + return "NONE"; + case DMA_FROM_DEVICE: + return "READ"; + case DMA_TO_DEVICE: + return "WRITE"; + case DMA_BIDIRECTIONAL: + return "BIDI"; + default: + break; + } + + return "UNKNOWN"; +} + +void transport_dump_dev_state( + struct se_device *dev, + char *b, + int *bl) +{ + *bl += sprintf(b + *bl, "Status: "); + switch (dev->dev_status) { + case TRANSPORT_DEVICE_ACTIVATED: + *bl += sprintf(b + *bl, "ACTIVATED"); + break; + case TRANSPORT_DEVICE_DEACTIVATED: + *bl += sprintf(b + *bl, "DEACTIVATED"); + break; + case TRANSPORT_DEVICE_SHUTDOWN: + *bl += sprintf(b + *bl, "SHUTDOWN"); + break; + case TRANSPORT_DEVICE_OFFLINE_ACTIVATED: + case TRANSPORT_DEVICE_OFFLINE_DEACTIVATED: + *bl += sprintf(b + *bl, "OFFLINE"); + break; + default: + *bl += sprintf(b + *bl, "UNKNOWN=%d", dev->dev_status); + break; + } + + *bl += sprintf(b + *bl, " Execute/Left/Max Queue Depth: %d/%d/%d", + atomic_read(&dev->execute_tasks), atomic_read(&dev->depth_left), + dev->queue_depth); + *bl += sprintf(b + *bl, " SectorSize: %u MaxSectors: %u\n", + DEV_ATTRIB(dev)->block_size, DEV_ATTRIB(dev)->max_sectors); + *bl += sprintf(b + *bl, " "); +} + +/* transport_release_all_cmds(): + * + * + */ +static void transport_release_all_cmds(struct se_device *dev) +{ + struct se_cmd *cmd = NULL; + struct se_queue_req *qr = NULL, *qr_p = NULL; + int bug_out = 0, t_state; + unsigned long flags; + + spin_lock_irqsave(&dev->dev_queue_obj->cmd_queue_lock, flags); + list_for_each_entry_safe(qr, qr_p, &dev->dev_queue_obj->qobj_list, + qr_list) { + + cmd = (struct se_cmd *)qr->cmd; + t_state = qr->state; + list_del(&qr->qr_list); + kfree(qr); + spin_unlock_irqrestore(&dev->dev_queue_obj->cmd_queue_lock, + flags); + + printk(KERN_ERR "Releasing ITT: 0x%08x, i_state: %u," + " t_state: %u directly\n", + CMD_TFO(cmd)->get_task_tag(cmd), + CMD_TFO(cmd)->get_cmd_state(cmd), t_state); + + transport_release_fe_cmd(cmd); + bug_out = 1; + + spin_lock_irqsave(&dev->dev_queue_obj->cmd_queue_lock, flags); + } + spin_unlock_irqrestore(&dev->dev_queue_obj->cmd_queue_lock, flags); +#if 0 + if (bug_out) + BUG(); +#endif +} + +void transport_dump_vpd_proto_id( + struct t10_vpd *vpd, + unsigned char *p_buf, + int p_buf_len) +{ + unsigned char buf[VPD_TMP_BUF_SIZE]; + int len; + + memset(buf, 0, VPD_TMP_BUF_SIZE); + len = sprintf(buf, "T10 VPD Protocol Identifier: "); + + switch (vpd->protocol_identifier) { + case 0x00: + sprintf(buf+len, "Fibre Channel\n"); + break; + case 0x10: + sprintf(buf+len, "Parallel SCSI\n"); + break; + case 0x20: + sprintf(buf+len, "SSA\n"); + break; + case 0x30: + sprintf(buf+len, "IEEE 1394\n"); + break; + case 0x40: + sprintf(buf+len, "SCSI Remote Direct Memory Access" + " Protocol\n"); + break; + case 0x50: + sprintf(buf+len, "Internet SCSI (iSCSI)\n"); + break; + case 0x60: + sprintf(buf+len, "SAS Serial SCSI Protocol\n"); + break; + case 0x70: + sprintf(buf+len, "Automation/Drive Interface Transport" + " Protocol\n"); + break; + case 0x80: + sprintf(buf+len, "AT Attachment Interface ATA/ATAPI\n"); + break; + default: + sprintf(buf+len, "Unknown 0x%02x\n", + vpd->protocol_identifier); + break; + } + + if (p_buf) + strncpy(p_buf, buf, p_buf_len); + else + printk(KERN_INFO "%s", buf); +} + +void +transport_set_vpd_proto_id(struct t10_vpd *vpd, unsigned char *page_83) +{ + /* + * Check if the Protocol Identifier Valid (PIV) bit is set.. + * + * from spc3r23.pdf section 7.5.1 + */ + if (page_83[1] & 0x80) { + vpd->protocol_identifier = (page_83[0] & 0xf0); + vpd->protocol_identifier_set = 1; + transport_dump_vpd_proto_id(vpd, NULL, 0); + } +} +EXPORT_SYMBOL(transport_set_vpd_proto_id); + +int transport_dump_vpd_assoc( + struct t10_vpd *vpd, + unsigned char *p_buf, + int p_buf_len) +{ + unsigned char buf[VPD_TMP_BUF_SIZE]; + int ret = 0, len; + + memset(buf, 0, VPD_TMP_BUF_SIZE); + len = sprintf(buf, "T10 VPD Identifier Association: "); + + switch (vpd->association) { + case 0x00: + sprintf(buf+len, "addressed logical unit\n"); + break; + case 0x10: + sprintf(buf+len, "target port\n"); + break; + case 0x20: + sprintf(buf+len, "SCSI target device\n"); + break; + default: + sprintf(buf+len, "Unknown 0x%02x\n", vpd->association); + ret = -1; + break; + } + + if (p_buf) + strncpy(p_buf, buf, p_buf_len); + else + printk("%s", buf); + + return ret; +} + +int transport_set_vpd_assoc(struct t10_vpd *vpd, unsigned char *page_83) +{ + /* + * The VPD identification association.. + * + * from spc3r23.pdf Section 7.6.3.1 Table 297 + */ + vpd->association = (page_83[1] & 0x30); + return transport_dump_vpd_assoc(vpd, NULL, 0); +} +EXPORT_SYMBOL(transport_set_vpd_assoc); + +int transport_dump_vpd_ident_type( + struct t10_vpd *vpd, + unsigned char *p_buf, + int p_buf_len) +{ + unsigned char buf[VPD_TMP_BUF_SIZE]; + int ret = 0, len; + + memset(buf, 0, VPD_TMP_BUF_SIZE); + len = sprintf(buf, "T10 VPD Identifier Type: "); + + switch (vpd->device_identifier_type) { + case 0x00: + sprintf(buf+len, "Vendor specific\n"); + break; + case 0x01: + sprintf(buf+len, "T10 Vendor ID based\n"); + break; + case 0x02: + sprintf(buf+len, "EUI-64 based\n"); + break; + case 0x03: + sprintf(buf+len, "NAA\n"); + break; + case 0x04: + sprintf(buf+len, "Relative target port identifier\n"); + break; + case 0x08: + sprintf(buf+len, "SCSI name string\n"); + break; + default: + sprintf(buf+len, "Unsupported: 0x%02x\n", + vpd->device_identifier_type); + ret = -1; + break; + } + + if (p_buf) + strncpy(p_buf, buf, p_buf_len); + else + printk("%s", buf); + + return ret; +} + +int transport_set_vpd_ident_type(struct t10_vpd *vpd, unsigned char *page_83) +{ + /* + * The VPD identifier type.. + * + * from spc3r23.pdf Section 7.6.3.1 Table 298 + */ + vpd->device_identifier_type = (page_83[1] & 0x0f); + return transport_dump_vpd_ident_type(vpd, NULL, 0); +} +EXPORT_SYMBOL(transport_set_vpd_ident_type); + +int transport_dump_vpd_ident( + struct t10_vpd *vpd, + unsigned char *p_buf, + int p_buf_len) +{ + unsigned char buf[VPD_TMP_BUF_SIZE]; + int ret = 0; + + memset(buf, 0, VPD_TMP_BUF_SIZE); + + switch (vpd->device_identifier_code_set) { + case 0x01: /* Binary */ + sprintf(buf, "T10 VPD Binary Device Identifier: %s\n", + &vpd->device_identifier[0]); + break; + case 0x02: /* ASCII */ + sprintf(buf, "T10 VPD ASCII Device Identifier: %s\n", + &vpd->device_identifier[0]); + break; + case 0x03: /* UTF-8 */ + sprintf(buf, "T10 VPD UTF-8 Device Identifier: %s\n", + &vpd->device_identifier[0]); + break; + default: + sprintf(buf, "T10 VPD Device Identifier encoding unsupported:" + " 0x%02x", vpd->device_identifier_code_set); + ret = -1; + break; + } + + if (p_buf) + strncpy(p_buf, buf, p_buf_len); + else + printk("%s", buf); + + return ret; +} + +int +transport_set_vpd_ident(struct t10_vpd *vpd, unsigned char *page_83) +{ + static const char hex_str[] = "0123456789abcdef"; + int j = 0, i = 4; /* offset to start of the identifer */ + + /* + * The VPD Code Set (encoding) + * + * from spc3r23.pdf Section 7.6.3.1 Table 296 + */ + vpd->device_identifier_code_set = (page_83[0] & 0x0f); + switch (vpd->device_identifier_code_set) { + case 0x01: /* Binary */ + vpd->device_identifier[j++] = + hex_str[vpd->device_identifier_type]; + while (i < (4 + page_83[3])) { + vpd->device_identifier[j++] = + hex_str[(page_83[i] & 0xf0) >> 4]; + vpd->device_identifier[j++] = + hex_str[page_83[i] & 0x0f]; + i++; + } + break; + case 0x02: /* ASCII */ + case 0x03: /* UTF-8 */ + while (i < (4 + page_83[3])) + vpd->device_identifier[j++] = page_83[i++]; + break; + default: + break; + } + + return transport_dump_vpd_ident(vpd, NULL, 0); +} +EXPORT_SYMBOL(transport_set_vpd_ident); + +static void core_setup_task_attr_emulation(struct se_device *dev) +{ + /* + * If this device is from Target_Core_Mod/pSCSI, disable the + * SAM Task Attribute emulation. + * + * This is currently not available in upsream Linux/SCSI Target + * mode code, and is assumed to be disabled while using TCM/pSCSI. + */ + if (TRANSPORT(dev)->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) { + dev->dev_task_attr_type = SAM_TASK_ATTR_PASSTHROUGH; + return; + } + + dev->dev_task_attr_type = SAM_TASK_ATTR_EMULATED; + DEBUG_STA("%s: Using SAM_TASK_ATTR_EMULATED for SPC: 0x%02x" + " device\n", TRANSPORT(dev)->name, + TRANSPORT(dev)->get_device_rev(dev)); +} + +static void scsi_dump_inquiry(struct se_device *dev) +{ + struct t10_wwn *wwn = DEV_T10_WWN(dev); + int i, device_type; + /* + * Print Linux/SCSI style INQUIRY formatting to the kernel ring buffer + */ + printk(" Vendor: "); + for (i = 0; i < 8; i++) + if (wwn->vendor[i] >= 0x20) + printk("%c", wwn->vendor[i]); + else + printk(" "); + + printk(" Model: "); + for (i = 0; i < 16; i++) + if (wwn->model[i] >= 0x20) + printk("%c", wwn->model[i]); + else + printk(" "); + + printk(" Revision: "); + for (i = 0; i < 4; i++) + if (wwn->revision[i] >= 0x20) + printk("%c", wwn->revision[i]); + else + printk(" "); + + printk("\n"); + + device_type = TRANSPORT(dev)->get_device_type(dev); + printk(" Type: %s ", scsi_device_type(device_type)); + printk(" ANSI SCSI revision: %02x\n", + TRANSPORT(dev)->get_device_rev(dev)); +} + +struct se_device *transport_add_device_to_core_hba( + struct se_hba *hba, + struct se_subsystem_api *transport, + struct se_subsystem_dev *se_dev, + u32 device_flags, + void *transport_dev, + struct se_dev_limits *dev_limits, + const char *inquiry_prod, + const char *inquiry_rev) +{ + int ret = 0, force_pt; + struct se_device *dev; + + dev = kzalloc(sizeof(struct se_device), GFP_KERNEL); + if (!(dev)) { + printk(KERN_ERR "Unable to allocate memory for se_dev_t\n"); + return NULL; + } + dev->dev_queue_obj = kzalloc(sizeof(struct se_queue_obj), GFP_KERNEL); + if (!(dev->dev_queue_obj)) { + printk(KERN_ERR "Unable to allocate memory for" + " dev->dev_queue_obj\n"); + kfree(dev); + return NULL; + } + transport_init_queue_obj(dev->dev_queue_obj); + + dev->dev_status_queue_obj = kzalloc(sizeof(struct se_queue_obj), + GFP_KERNEL); + if (!(dev->dev_status_queue_obj)) { + printk(KERN_ERR "Unable to allocate memory for" + " dev->dev_status_queue_obj\n"); + kfree(dev->dev_queue_obj); + kfree(dev); + return NULL; + } + transport_init_queue_obj(dev->dev_status_queue_obj); + + dev->dev_flags = device_flags; + dev->dev_status |= TRANSPORT_DEVICE_DEACTIVATED; + dev->dev_ptr = (void *) transport_dev; + dev->se_hba = hba; + dev->se_sub_dev = se_dev; + dev->transport = transport; + atomic_set(&dev->active_cmds, 0); + INIT_LIST_HEAD(&dev->dev_list); + INIT_LIST_HEAD(&dev->dev_sep_list); + INIT_LIST_HEAD(&dev->dev_tmr_list); + INIT_LIST_HEAD(&dev->execute_task_list); + INIT_LIST_HEAD(&dev->delayed_cmd_list); + INIT_LIST_HEAD(&dev->ordered_cmd_list); + INIT_LIST_HEAD(&dev->state_task_list); + spin_lock_init(&dev->execute_task_lock); + spin_lock_init(&dev->delayed_cmd_lock); + spin_lock_init(&dev->ordered_cmd_lock); + spin_lock_init(&dev->state_task_lock); + spin_lock_init(&dev->dev_alua_lock); + spin_lock_init(&dev->dev_reservation_lock); + spin_lock_init(&dev->dev_status_lock); + spin_lock_init(&dev->dev_status_thr_lock); + spin_lock_init(&dev->se_port_lock); + spin_lock_init(&dev->se_tmr_lock); + + dev->queue_depth = dev_limits->queue_depth; + atomic_set(&dev->depth_left, dev->queue_depth); + atomic_set(&dev->dev_ordered_id, 0); + + se_dev_set_default_attribs(dev, dev_limits); + + dev->dev_index = scsi_get_new_index(SCSI_DEVICE_INDEX); + dev->creation_time = get_jiffies_64(); + spin_lock_init(&dev->stats_lock); + + spin_lock(&hba->device_lock); + list_add_tail(&dev->dev_list, &hba->hba_dev_list); + hba->dev_count++; + spin_unlock(&hba->device_lock); + /* + * Setup the SAM Task Attribute emulation for struct se_device + */ + core_setup_task_attr_emulation(dev); + /* + * Force PR and ALUA passthrough emulation with internal object use. + */ + force_pt = (hba->hba_flags & HBA_FLAGS_INTERNAL_USE); + /* + * Setup the Reservations infrastructure for struct se_device + */ + core_setup_reservations(dev, force_pt); + /* + * Setup the Asymmetric Logical Unit Assignment for struct se_device + */ + if (core_setup_alua(dev, force_pt) < 0) + goto out; + + /* + * Startup the struct se_device processing thread + */ + dev->process_thread = kthread_run(transport_processing_thread, dev, + "LIO_%s", TRANSPORT(dev)->name); + if (IS_ERR(dev->process_thread)) { + printk(KERN_ERR "Unable to create kthread: LIO_%s\n", + TRANSPORT(dev)->name); + goto out; + } + + /* + * Preload the initial INQUIRY const values if we are doing + * anything virtual (IBLOCK, FILEIO, RAMDISK), but not for TCM/pSCSI + * passthrough because this is being provided by the backend LLD. + * This is required so that transport_get_inquiry() copies these + * originals once back into DEV_T10_WWN(dev) for the virtual device + * setup. + */ + if (TRANSPORT(dev)->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV) { + if (!(inquiry_prod) || !(inquiry_prod)) { + printk(KERN_ERR "All non TCM/pSCSI plugins require" + " INQUIRY consts\n"); + goto out; + } + + strncpy(&DEV_T10_WWN(dev)->vendor[0], "LIO-ORG", 8); + strncpy(&DEV_T10_WWN(dev)->model[0], inquiry_prod, 16); + strncpy(&DEV_T10_WWN(dev)->revision[0], inquiry_rev, 4); + } + scsi_dump_inquiry(dev); + +out: + if (!ret) + return dev; + kthread_stop(dev->process_thread); + + spin_lock(&hba->device_lock); + list_del(&dev->dev_list); + hba->dev_count--; + spin_unlock(&hba->device_lock); + + se_release_vpd_for_dev(dev); + + kfree(dev->dev_status_queue_obj); + kfree(dev->dev_queue_obj); + kfree(dev); + + return NULL; +} +EXPORT_SYMBOL(transport_add_device_to_core_hba); + +/* transport_generic_prepare_cdb(): + * + * Since the Initiator sees iSCSI devices as LUNs, the SCSI CDB will + * contain the iSCSI LUN in bits 7-5 of byte 1 as per SAM-2. + * The point of this is since we are mapping iSCSI LUNs to + * SCSI Target IDs having a non-zero LUN in the CDB will throw the + * devices and HBAs for a loop. + */ +static inline void transport_generic_prepare_cdb( + unsigned char *cdb) +{ + switch (cdb[0]) { + case READ_10: /* SBC - RDProtect */ + case READ_12: /* SBC - RDProtect */ + case READ_16: /* SBC - RDProtect */ + case SEND_DIAGNOSTIC: /* SPC - SELF-TEST Code */ + case VERIFY: /* SBC - VRProtect */ + case VERIFY_16: /* SBC - VRProtect */ + case WRITE_VERIFY: /* SBC - VRProtect */ + case WRITE_VERIFY_12: /* SBC - VRProtect */ + break; + default: + cdb[1] &= 0x1f; /* clear logical unit number */ + break; + } +} + +static struct se_task * +transport_generic_get_task(struct se_cmd *cmd, + enum dma_data_direction data_direction) +{ + struct se_task *task; + struct se_device *dev = SE_DEV(cmd); + unsigned long flags; + + task = dev->transport->alloc_task(cmd); + if (!task) { + printk(KERN_ERR "Unable to allocate struct se_task\n"); + return NULL; + } + + INIT_LIST_HEAD(&task->t_list); + INIT_LIST_HEAD(&task->t_execute_list); + INIT_LIST_HEAD(&task->t_state_list); + init_completion(&task->task_stop_comp); + task->task_no = T_TASK(cmd)->t_tasks_no++; + task->task_se_cmd = cmd; + task->se_dev = dev; + task->task_data_direction = data_direction; + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + list_add_tail(&task->t_list, &T_TASK(cmd)->t_task_list); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + return task; +} + +static int transport_generic_cmd_sequencer(struct se_cmd *, unsigned char *); + +void transport_device_setup_cmd(struct se_cmd *cmd) +{ + cmd->se_dev = SE_LUN(cmd)->lun_se_dev; +} +EXPORT_SYMBOL(transport_device_setup_cmd); + +/* + * Used by fabric modules containing a local struct se_cmd within their + * fabric dependent per I/O descriptor. + */ +void transport_init_se_cmd( + struct se_cmd *cmd, + struct target_core_fabric_ops *tfo, + struct se_session *se_sess, + u32 data_length, + int data_direction, + int task_attr, + unsigned char *sense_buffer) +{ + INIT_LIST_HEAD(&cmd->se_lun_list); + INIT_LIST_HEAD(&cmd->se_delayed_list); + INIT_LIST_HEAD(&cmd->se_ordered_list); + /* + * Setup t_task pointer to t_task_backstore + */ + cmd->t_task = &cmd->t_task_backstore; + + INIT_LIST_HEAD(&T_TASK(cmd)->t_task_list); + init_completion(&T_TASK(cmd)->transport_lun_fe_stop_comp); + init_completion(&T_TASK(cmd)->transport_lun_stop_comp); + init_completion(&T_TASK(cmd)->t_transport_stop_comp); + spin_lock_init(&T_TASK(cmd)->t_state_lock); + atomic_set(&T_TASK(cmd)->transport_dev_active, 1); + + cmd->se_tfo = tfo; + cmd->se_sess = se_sess; + cmd->data_length = data_length; + cmd->data_direction = data_direction; + cmd->sam_task_attr = task_attr; + cmd->sense_buffer = sense_buffer; +} +EXPORT_SYMBOL(transport_init_se_cmd); + +static int transport_check_alloc_task_attr(struct se_cmd *cmd) +{ + /* + * Check if SAM Task Attribute emulation is enabled for this + * struct se_device storage object + */ + if (SE_DEV(cmd)->dev_task_attr_type != SAM_TASK_ATTR_EMULATED) + return 0; + + if (cmd->sam_task_attr == TASK_ATTR_ACA) { + DEBUG_STA("SAM Task Attribute ACA" + " emulation is not supported\n"); + return -1; + } + /* + * Used to determine when ORDERED commands should go from + * Dormant to Active status. + */ + cmd->se_ordered_id = atomic_inc_return(&SE_DEV(cmd)->dev_ordered_id); + smp_mb__after_atomic_inc(); + DEBUG_STA("Allocated se_ordered_id: %u for Task Attr: 0x%02x on %s\n", + cmd->se_ordered_id, cmd->sam_task_attr, + TRANSPORT(cmd->se_dev)->name); + return 0; +} + +void transport_free_se_cmd( + struct se_cmd *se_cmd) +{ + if (se_cmd->se_tmr_req) + core_tmr_release_req(se_cmd->se_tmr_req); + /* + * Check and free any extended CDB buffer that was allocated + */ + if (T_TASK(se_cmd)->t_task_cdb != T_TASK(se_cmd)->__t_task_cdb) + kfree(T_TASK(se_cmd)->t_task_cdb); +} +EXPORT_SYMBOL(transport_free_se_cmd); + +static void transport_generic_wait_for_tasks(struct se_cmd *, int, int); + +/* transport_generic_allocate_tasks(): + * + * Called from fabric RX Thread. + */ +int transport_generic_allocate_tasks( + struct se_cmd *cmd, + unsigned char *cdb) +{ + int ret; + + transport_generic_prepare_cdb(cdb); + + /* + * This is needed for early exceptions. + */ + cmd->transport_wait_for_tasks = &transport_generic_wait_for_tasks; + + transport_device_setup_cmd(cmd); + /* + * Ensure that the received CDB is less than the max (252 + 8) bytes + * for VARIABLE_LENGTH_CMD + */ + if (scsi_command_size(cdb) > SCSI_MAX_VARLEN_CDB_SIZE) { + printk(KERN_ERR "Received SCSI CDB with command_size: %d that" + " exceeds SCSI_MAX_VARLEN_CDB_SIZE: %d\n", + scsi_command_size(cdb), SCSI_MAX_VARLEN_CDB_SIZE); + return -1; + } + /* + * If the received CDB is larger than TCM_MAX_COMMAND_SIZE, + * allocate the additional extended CDB buffer now.. Otherwise + * setup the pointer from __t_task_cdb to t_task_cdb. + */ + if (scsi_command_size(cdb) > sizeof(T_TASK(cmd)->__t_task_cdb)) { + T_TASK(cmd)->t_task_cdb = kzalloc(scsi_command_size(cdb), + GFP_KERNEL); + if (!(T_TASK(cmd)->t_task_cdb)) { + printk(KERN_ERR "Unable to allocate T_TASK(cmd)->t_task_cdb" + " %u > sizeof(T_TASK(cmd)->__t_task_cdb): %lu ops\n", + scsi_command_size(cdb), + (unsigned long)sizeof(T_TASK(cmd)->__t_task_cdb)); + return -1; + } + } else + T_TASK(cmd)->t_task_cdb = &T_TASK(cmd)->__t_task_cdb[0]; + /* + * Copy the original CDB into T_TASK(cmd). + */ + memcpy(T_TASK(cmd)->t_task_cdb, cdb, scsi_command_size(cdb)); + /* + * Setup the received CDB based on SCSI defined opcodes and + * perform unit attention, persistent reservations and ALUA + * checks for virtual device backends. The T_TASK(cmd)->t_task_cdb + * pointer is expected to be setup before we reach this point. + */ + ret = transport_generic_cmd_sequencer(cmd, cdb); + if (ret < 0) + return ret; + /* + * Check for SAM Task Attribute Emulation + */ + if (transport_check_alloc_task_attr(cmd) < 0) { + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -2; + } + spin_lock(&cmd->se_lun->lun_sep_lock); + if (cmd->se_lun->lun_sep) + cmd->se_lun->lun_sep->sep_stats.cmd_pdus++; + spin_unlock(&cmd->se_lun->lun_sep_lock); + return 0; +} +EXPORT_SYMBOL(transport_generic_allocate_tasks); + +/* + * Used by fabric module frontends not defining a TFO->new_cmd_map() + * to queue up a newly setup se_cmd w/ TRANSPORT_NEW_CMD statis + */ +int transport_generic_handle_cdb( + struct se_cmd *cmd) +{ + if (!SE_LUN(cmd)) { + dump_stack(); + printk(KERN_ERR "SE_LUN(cmd) is NULL\n"); + return -1; + } + + transport_add_cmd_to_queue(cmd, TRANSPORT_NEW_CMD); + return 0; +} +EXPORT_SYMBOL(transport_generic_handle_cdb); + +/* + * Used by fabric module frontends defining a TFO->new_cmd_map() caller + * to queue up a newly setup se_cmd w/ TRANSPORT_NEW_CMD_MAP in order to + * complete setup in TCM process context w/ TFO->new_cmd_map(). + */ +int transport_generic_handle_cdb_map( + struct se_cmd *cmd) +{ + if (!SE_LUN(cmd)) { + dump_stack(); + printk(KERN_ERR "SE_LUN(cmd) is NULL\n"); + return -1; + } + + transport_add_cmd_to_queue(cmd, TRANSPORT_NEW_CMD_MAP); + return 0; +} +EXPORT_SYMBOL(transport_generic_handle_cdb_map); + +/* transport_generic_handle_data(): + * + * + */ +int transport_generic_handle_data( + struct se_cmd *cmd) +{ + /* + * For the software fabric case, then we assume the nexus is being + * failed/shutdown when signals are pending from the kthread context + * caller, so we return a failure. For the HW target mode case running + * in interrupt code, the signal_pending() check is skipped. + */ + if (!in_interrupt() && signal_pending(current)) + return -1; + /* + * If the received CDB has aleady been ABORTED by the generic + * target engine, we now call transport_check_aborted_status() + * to queue any delated TASK_ABORTED status for the received CDB to the + * fabric module as we are expecting no futher incoming DATA OUT + * sequences at this point. + */ + if (transport_check_aborted_status(cmd, 1) != 0) + return 0; + + transport_add_cmd_to_queue(cmd, TRANSPORT_PROCESS_WRITE); + return 0; +} +EXPORT_SYMBOL(transport_generic_handle_data); + +/* transport_generic_handle_tmr(): + * + * + */ +int transport_generic_handle_tmr( + struct se_cmd *cmd) +{ + /* + * This is needed for early exceptions. + */ + cmd->transport_wait_for_tasks = &transport_generic_wait_for_tasks; + transport_device_setup_cmd(cmd); + + transport_add_cmd_to_queue(cmd, TRANSPORT_PROCESS_TMR); + return 0; +} +EXPORT_SYMBOL(transport_generic_handle_tmr); + +static int transport_stop_tasks_for_cmd(struct se_cmd *cmd) +{ + struct se_task *task, *task_tmp; + unsigned long flags; + int ret = 0; + + DEBUG_TS("ITT[0x%08x] - Stopping tasks\n", + CMD_TFO(cmd)->get_task_tag(cmd)); + + /* + * No tasks remain in the execution queue + */ + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + list_for_each_entry_safe(task, task_tmp, + &T_TASK(cmd)->t_task_list, t_list) { + DEBUG_TS("task_no[%d] - Processing task %p\n", + task->task_no, task); + /* + * If the struct se_task has not been sent and is not active, + * remove the struct se_task from the execution queue. + */ + if (!atomic_read(&task->task_sent) && + !atomic_read(&task->task_active)) { + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, + flags); + transport_remove_task_from_execute_queue(task, + task->se_dev); + + DEBUG_TS("task_no[%d] - Removed from execute queue\n", + task->task_no); + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + continue; + } + + /* + * If the struct se_task is active, sleep until it is returned + * from the plugin. + */ + if (atomic_read(&task->task_active)) { + atomic_set(&task->task_stop, 1); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, + flags); + + DEBUG_TS("task_no[%d] - Waiting to complete\n", + task->task_no); + wait_for_completion(&task->task_stop_comp); + DEBUG_TS("task_no[%d] - Stopped successfully\n", + task->task_no); + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + atomic_dec(&T_TASK(cmd)->t_task_cdbs_left); + + atomic_set(&task->task_active, 0); + atomic_set(&task->task_stop, 0); + } else { + DEBUG_TS("task_no[%d] - Did nothing\n", task->task_no); + ret++; + } + + __transport_stop_task_timer(task, &flags); + } + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + return ret; +} + +static void transport_failure_reset_queue_depth(struct se_device *dev) +{ + unsigned long flags; + + spin_lock_irqsave(&SE_HBA(dev)->hba_queue_lock, flags);; + atomic_inc(&dev->depth_left); + atomic_inc(&SE_HBA(dev)->left_queue_depth); + spin_unlock_irqrestore(&SE_HBA(dev)->hba_queue_lock, flags); +} + +/* + * Handle SAM-esque emulation for generic transport request failures. + */ +static void transport_generic_request_failure( + struct se_cmd *cmd, + struct se_device *dev, + int complete, + int sc) +{ + DEBUG_GRF("-----[ Storage Engine Exception for cmd: %p ITT: 0x%08x" + " CDB: 0x%02x\n", cmd, CMD_TFO(cmd)->get_task_tag(cmd), + T_TASK(cmd)->t_task_cdb[0]); + DEBUG_GRF("-----[ i_state: %d t_state/def_t_state:" + " %d/%d transport_error_status: %d\n", + CMD_TFO(cmd)->get_cmd_state(cmd), + cmd->t_state, cmd->deferred_t_state, + cmd->transport_error_status); + DEBUG_GRF("-----[ t_task_cdbs: %d t_task_cdbs_left: %d" + " t_task_cdbs_sent: %d t_task_cdbs_ex_left: %d --" + " t_transport_active: %d t_transport_stop: %d" + " t_transport_sent: %d\n", T_TASK(cmd)->t_task_cdbs, + atomic_read(&T_TASK(cmd)->t_task_cdbs_left), + atomic_read(&T_TASK(cmd)->t_task_cdbs_sent), + atomic_read(&T_TASK(cmd)->t_task_cdbs_ex_left), + atomic_read(&T_TASK(cmd)->t_transport_active), + atomic_read(&T_TASK(cmd)->t_transport_stop), + atomic_read(&T_TASK(cmd)->t_transport_sent)); + + transport_stop_all_task_timers(cmd); + + if (dev) + transport_failure_reset_queue_depth(dev); + /* + * For SAM Task Attribute emulation for failed struct se_cmd + */ + if (cmd->se_dev->dev_task_attr_type == SAM_TASK_ATTR_EMULATED) + transport_complete_task_attr(cmd); + + if (complete) { + transport_direct_request_timeout(cmd); + cmd->transport_error_status = PYX_TRANSPORT_LU_COMM_FAILURE; + } + + switch (cmd->transport_error_status) { + case PYX_TRANSPORT_UNKNOWN_SAM_OPCODE: + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + break; + case PYX_TRANSPORT_REQ_TOO_MANY_SECTORS: + cmd->scsi_sense_reason = TCM_SECTOR_COUNT_TOO_MANY; + break; + case PYX_TRANSPORT_INVALID_CDB_FIELD: + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + break; + case PYX_TRANSPORT_INVALID_PARAMETER_LIST: + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + break; + case PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES: + if (!sc) + transport_new_cmd_failure(cmd); + /* + * Currently for PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES, + * we force this session to fall back to session + * recovery. + */ + CMD_TFO(cmd)->fall_back_to_erl0(cmd->se_sess); + CMD_TFO(cmd)->stop_session(cmd->se_sess, 0, 0); + + goto check_stop; + case PYX_TRANSPORT_LU_COMM_FAILURE: + case PYX_TRANSPORT_ILLEGAL_REQUEST: + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + break; + case PYX_TRANSPORT_UNKNOWN_MODE_PAGE: + cmd->scsi_sense_reason = TCM_UNKNOWN_MODE_PAGE; + break; + case PYX_TRANSPORT_WRITE_PROTECTED: + cmd->scsi_sense_reason = TCM_WRITE_PROTECTED; + break; + case PYX_TRANSPORT_RESERVATION_CONFLICT: + /* + * No SENSE Data payload for this case, set SCSI Status + * and queue the response to $FABRIC_MOD. + * + * Uses linux/include/scsi/scsi.h SAM status codes defs + */ + cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT; + /* + * For UA Interlock Code 11b, a RESERVATION CONFLICT will + * establish a UNIT ATTENTION with PREVIOUS RESERVATION + * CONFLICT STATUS. + * + * See spc4r17, section 7.4.6 Control Mode Page, Table 349 + */ + if (SE_SESS(cmd) && + DEV_ATTRIB(cmd->se_dev)->emulate_ua_intlck_ctrl == 2) + core_scsi3_ua_allocate(SE_SESS(cmd)->se_node_acl, + cmd->orig_fe_lun, 0x2C, + ASCQ_2CH_PREVIOUS_RESERVATION_CONFLICT_STATUS); + + CMD_TFO(cmd)->queue_status(cmd); + goto check_stop; + case PYX_TRANSPORT_USE_SENSE_REASON: + /* + * struct se_cmd->scsi_sense_reason already set + */ + break; + default: + printk(KERN_ERR "Unknown transport error for CDB 0x%02x: %d\n", + T_TASK(cmd)->t_task_cdb[0], + cmd->transport_error_status); + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + break; + } + + if (!sc) + transport_new_cmd_failure(cmd); + else + transport_send_check_condition_and_sense(cmd, + cmd->scsi_sense_reason, 0); +check_stop: + transport_lun_remove_cmd(cmd); + if (!(transport_cmd_check_stop_to_fabric(cmd))) + ; +} + +static void transport_direct_request_timeout(struct se_cmd *cmd) +{ + unsigned long flags; + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + if (!(atomic_read(&T_TASK(cmd)->t_transport_timeout))) { + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + return; + } + if (atomic_read(&T_TASK(cmd)->t_task_cdbs_timeout_left)) { + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + return; + } + + atomic_sub(atomic_read(&T_TASK(cmd)->t_transport_timeout), + &T_TASK(cmd)->t_se_count); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); +} + +static void transport_generic_request_timeout(struct se_cmd *cmd) +{ + unsigned long flags; + + /* + * Reset T_TASK(cmd)->t_se_count to allow transport_generic_remove() + * to allow last call to free memory resources. + */ + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + if (atomic_read(&T_TASK(cmd)->t_transport_timeout) > 1) { + int tmp = (atomic_read(&T_TASK(cmd)->t_transport_timeout) - 1); + + atomic_sub(tmp, &T_TASK(cmd)->t_se_count); + } + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + transport_generic_remove(cmd, 0, 0); +} + +static int +transport_generic_allocate_buf(struct se_cmd *cmd, u32 data_length) +{ + unsigned char *buf; + + buf = kzalloc(data_length, GFP_KERNEL); + if (!(buf)) { + printk(KERN_ERR "Unable to allocate memory for buffer\n"); + return -1; + } + + T_TASK(cmd)->t_tasks_se_num = 0; + T_TASK(cmd)->t_task_buf = buf; + + return 0; +} + +static inline u32 transport_lba_21(unsigned char *cdb) +{ + return ((cdb[1] & 0x1f) << 16) | (cdb[2] << 8) | cdb[3]; +} + +static inline u32 transport_lba_32(unsigned char *cdb) +{ + return (cdb[2] << 24) | (cdb[3] << 16) | (cdb[4] << 8) | cdb[5]; +} + +static inline unsigned long long transport_lba_64(unsigned char *cdb) +{ + unsigned int __v1, __v2; + + __v1 = (cdb[2] << 24) | (cdb[3] << 16) | (cdb[4] << 8) | cdb[5]; + __v2 = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9]; + + return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32; +} + +/* + * For VARIABLE_LENGTH_CDB w/ 32 byte extended CDBs + */ +static inline unsigned long long transport_lba_64_ext(unsigned char *cdb) +{ + unsigned int __v1, __v2; + + __v1 = (cdb[12] << 24) | (cdb[13] << 16) | (cdb[14] << 8) | cdb[15]; + __v2 = (cdb[16] << 24) | (cdb[17] << 16) | (cdb[18] << 8) | cdb[19]; + + return ((unsigned long long)__v2) | (unsigned long long)__v1 << 32; +} + +static void transport_set_supported_SAM_opcode(struct se_cmd *se_cmd) +{ + unsigned long flags; + + spin_lock_irqsave(&T_TASK(se_cmd)->t_state_lock, flags); + se_cmd->se_cmd_flags |= SCF_SUPPORTED_SAM_OPCODE; + spin_unlock_irqrestore(&T_TASK(se_cmd)->t_state_lock, flags); +} + +/* + * Called from interrupt context. + */ +static void transport_task_timeout_handler(unsigned long data) +{ + struct se_task *task = (struct se_task *)data; + struct se_cmd *cmd = TASK_CMD(task); + unsigned long flags; + + DEBUG_TT("transport task timeout fired! task: %p cmd: %p\n", task, cmd); + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + if (task->task_flags & TF_STOP) { + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + return; + } + task->task_flags &= ~TF_RUNNING; + + /* + * Determine if transport_complete_task() has already been called. + */ + if (!(atomic_read(&task->task_active))) { + DEBUG_TT("transport task: %p cmd: %p timeout task_active" + " == 0\n", task, cmd); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + return; + } + + atomic_inc(&T_TASK(cmd)->t_se_count); + atomic_inc(&T_TASK(cmd)->t_transport_timeout); + T_TASK(cmd)->t_tasks_failed = 1; + + atomic_set(&task->task_timeout, 1); + task->task_error_status = PYX_TRANSPORT_TASK_TIMEOUT; + task->task_scsi_status = 1; + + if (atomic_read(&task->task_stop)) { + DEBUG_TT("transport task: %p cmd: %p timeout task_stop" + " == 1\n", task, cmd); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + complete(&task->task_stop_comp); + return; + } + + if (!(atomic_dec_and_test(&T_TASK(cmd)->t_task_cdbs_left))) { + DEBUG_TT("transport task: %p cmd: %p timeout non zero" + " t_task_cdbs_left\n", task, cmd); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + return; + } + DEBUG_TT("transport task: %p cmd: %p timeout ZERO t_task_cdbs_left\n", + task, cmd); + + cmd->t_state = TRANSPORT_COMPLETE_FAILURE; + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + transport_add_cmd_to_queue(cmd, TRANSPORT_COMPLETE_FAILURE); +} + +/* + * Called with T_TASK(cmd)->t_state_lock held. + */ +static void transport_start_task_timer(struct se_task *task) +{ + struct se_device *dev = task->se_dev; + int timeout; + + if (task->task_flags & TF_RUNNING) + return; + /* + * If the task_timeout is disabled, exit now. + */ + timeout = DEV_ATTRIB(dev)->task_timeout; + if (!(timeout)) + return; + + init_timer(&task->task_timer); + task->task_timer.expires = (get_jiffies_64() + timeout * HZ); + task->task_timer.data = (unsigned long) task; + task->task_timer.function = transport_task_timeout_handler; + + task->task_flags |= TF_RUNNING; + add_timer(&task->task_timer); +#if 0 + printk(KERN_INFO "Starting task timer for cmd: %p task: %p seconds:" + " %d\n", task->task_se_cmd, task, timeout); +#endif +} + +/* + * Called with spin_lock_irq(&T_TASK(cmd)->t_state_lock) held. + */ +void __transport_stop_task_timer(struct se_task *task, unsigned long *flags) +{ + struct se_cmd *cmd = TASK_CMD(task); + + if (!(task->task_flags & TF_RUNNING)) + return; + + task->task_flags |= TF_STOP; + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, *flags); + + del_timer_sync(&task->task_timer); + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, *flags); + task->task_flags &= ~TF_RUNNING; + task->task_flags &= ~TF_STOP; +} + +static void transport_stop_all_task_timers(struct se_cmd *cmd) +{ + struct se_task *task = NULL, *task_tmp; + unsigned long flags; + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + list_for_each_entry_safe(task, task_tmp, + &T_TASK(cmd)->t_task_list, t_list) + __transport_stop_task_timer(task, &flags); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); +} + +static inline int transport_tcq_window_closed(struct se_device *dev) +{ + if (dev->dev_tcq_window_closed++ < + PYX_TRANSPORT_WINDOW_CLOSED_THRESHOLD) { + msleep(PYX_TRANSPORT_WINDOW_CLOSED_WAIT_SHORT); + } else + msleep(PYX_TRANSPORT_WINDOW_CLOSED_WAIT_LONG); + + wake_up_interruptible(&dev->dev_queue_obj->thread_wq); + return 0; +} + +/* + * Called from Fabric Module context from transport_execute_tasks() + * + * The return of this function determins if the tasks from struct se_cmd + * get added to the execution queue in transport_execute_tasks(), + * or are added to the delayed or ordered lists here. + */ +static inline int transport_execute_task_attr(struct se_cmd *cmd) +{ + if (SE_DEV(cmd)->dev_task_attr_type != SAM_TASK_ATTR_EMULATED) + return 1; + /* + * Check for the existance of HEAD_OF_QUEUE, and if true return 1 + * to allow the passed struct se_cmd list of tasks to the front of the list. + */ + if (cmd->sam_task_attr == TASK_ATTR_HOQ) { + atomic_inc(&SE_DEV(cmd)->dev_hoq_count); + smp_mb__after_atomic_inc(); + DEBUG_STA("Added HEAD_OF_QUEUE for CDB:" + " 0x%02x, se_ordered_id: %u\n", + T_TASK(cmd)->t_task_cdb[0], + cmd->se_ordered_id); + return 1; + } else if (cmd->sam_task_attr == TASK_ATTR_ORDERED) { + spin_lock(&SE_DEV(cmd)->ordered_cmd_lock); + list_add_tail(&cmd->se_ordered_list, + &SE_DEV(cmd)->ordered_cmd_list); + spin_unlock(&SE_DEV(cmd)->ordered_cmd_lock); + + atomic_inc(&SE_DEV(cmd)->dev_ordered_sync); + smp_mb__after_atomic_inc(); + + DEBUG_STA("Added ORDERED for CDB: 0x%02x to ordered" + " list, se_ordered_id: %u\n", + T_TASK(cmd)->t_task_cdb[0], + cmd->se_ordered_id); + /* + * Add ORDERED command to tail of execution queue if + * no other older commands exist that need to be + * completed first. + */ + if (!(atomic_read(&SE_DEV(cmd)->simple_cmds))) + return 1; + } else { + /* + * For SIMPLE and UNTAGGED Task Attribute commands + */ + atomic_inc(&SE_DEV(cmd)->simple_cmds); + smp_mb__after_atomic_inc(); + } + /* + * Otherwise if one or more outstanding ORDERED task attribute exist, + * add the dormant task(s) built for the passed struct se_cmd to the + * execution queue and become in Active state for this struct se_device. + */ + if (atomic_read(&SE_DEV(cmd)->dev_ordered_sync) != 0) { + /* + * Otherwise, add cmd w/ tasks to delayed cmd queue that + * will be drained upon competion of HEAD_OF_QUEUE task. + */ + spin_lock(&SE_DEV(cmd)->delayed_cmd_lock); + cmd->se_cmd_flags |= SCF_DELAYED_CMD_FROM_SAM_ATTR; + list_add_tail(&cmd->se_delayed_list, + &SE_DEV(cmd)->delayed_cmd_list); + spin_unlock(&SE_DEV(cmd)->delayed_cmd_lock); + + DEBUG_STA("Added CDB: 0x%02x Task Attr: 0x%02x to" + " delayed CMD list, se_ordered_id: %u\n", + T_TASK(cmd)->t_task_cdb[0], cmd->sam_task_attr, + cmd->se_ordered_id); + /* + * Return zero to let transport_execute_tasks() know + * not to add the delayed tasks to the execution list. + */ + return 0; + } + /* + * Otherwise, no ORDERED task attributes exist.. + */ + return 1; +} + +/* + * Called from fabric module context in transport_generic_new_cmd() and + * transport_generic_process_write() + */ +static int transport_execute_tasks(struct se_cmd *cmd) +{ + int add_tasks; + + if (!(cmd->se_cmd_flags & SCF_SE_DISABLE_ONLINE_CHECK)) { + if (se_dev_check_online(cmd->se_orig_obj_ptr) != 0) { + cmd->transport_error_status = + PYX_TRANSPORT_LU_COMM_FAILURE; + transport_generic_request_failure(cmd, NULL, 0, 1); + return 0; + } + } + /* + * Call transport_cmd_check_stop() to see if a fabric exception + * has occured that prevents execution. + */ + if (!(transport_cmd_check_stop(cmd, 0, TRANSPORT_PROCESSING))) { + /* + * Check for SAM Task Attribute emulation and HEAD_OF_QUEUE + * attribute for the tasks of the received struct se_cmd CDB + */ + add_tasks = transport_execute_task_attr(cmd); + if (add_tasks == 0) + goto execute_tasks; + /* + * This calls transport_add_tasks_from_cmd() to handle + * HEAD_OF_QUEUE ordering for SAM Task Attribute emulation + * (if enabled) in __transport_add_task_to_execute_queue() and + * transport_add_task_check_sam_attr(). + */ + transport_add_tasks_from_cmd(cmd); + } + /* + * Kick the execution queue for the cmd associated struct se_device + * storage object. + */ +execute_tasks: + __transport_execute_tasks(SE_DEV(cmd)); + return 0; +} + +/* + * Called to check struct se_device tcq depth window, and once open pull struct se_task + * from struct se_device->execute_task_list and + * + * Called from transport_processing_thread() + */ +static int __transport_execute_tasks(struct se_device *dev) +{ + int error; + struct se_cmd *cmd = NULL; + struct se_task *task; + unsigned long flags; + + /* + * Check if there is enough room in the device and HBA queue to send + * struct se_transport_task's to the selected transport. + */ +check_depth: + spin_lock_irqsave(&SE_HBA(dev)->hba_queue_lock, flags); + if (!(atomic_read(&dev->depth_left)) || + !(atomic_read(&SE_HBA(dev)->left_queue_depth))) { + spin_unlock_irqrestore(&SE_HBA(dev)->hba_queue_lock, flags); + return transport_tcq_window_closed(dev); + } + dev->dev_tcq_window_closed = 0; + + spin_lock(&dev->execute_task_lock); + task = transport_get_task_from_execute_queue(dev); + spin_unlock(&dev->execute_task_lock); + + if (!task) { + spin_unlock_irqrestore(&SE_HBA(dev)->hba_queue_lock, flags); + return 0; + } + + atomic_dec(&dev->depth_left); + atomic_dec(&SE_HBA(dev)->left_queue_depth); + spin_unlock_irqrestore(&SE_HBA(dev)->hba_queue_lock, flags); + + cmd = TASK_CMD(task); + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + atomic_set(&task->task_active, 1); + atomic_set(&task->task_sent, 1); + atomic_inc(&T_TASK(cmd)->t_task_cdbs_sent); + + if (atomic_read(&T_TASK(cmd)->t_task_cdbs_sent) == + T_TASK(cmd)->t_task_cdbs) + atomic_set(&cmd->transport_sent, 1); + + transport_start_task_timer(task); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + /* + * The struct se_cmd->transport_emulate_cdb() function pointer is used + * to grab REPORT_LUNS CDBs before they hit the + * struct se_subsystem_api->do_task() caller below. + */ + if (cmd->transport_emulate_cdb) { + error = cmd->transport_emulate_cdb(cmd); + if (error != 0) { + cmd->transport_error_status = error; + atomic_set(&task->task_active, 0); + atomic_set(&cmd->transport_sent, 0); + transport_stop_tasks_for_cmd(cmd); + transport_generic_request_failure(cmd, dev, 0, 1); + goto check_depth; + } + /* + * Handle the successful completion for transport_emulate_cdb() + * for synchronous operation, following SCF_EMULATE_CDB_ASYNC + * Otherwise the caller is expected to complete the task with + * proper status. + */ + if (!(cmd->se_cmd_flags & SCF_EMULATE_CDB_ASYNC)) { + cmd->scsi_status = SAM_STAT_GOOD; + task->task_scsi_status = GOOD; + transport_complete_task(task, 1); + } + } else { + /* + * Currently for all virtual TCM plugins including IBLOCK, FILEIO and + * RAMDISK we use the internal transport_emulate_control_cdb() logic + * with struct se_subsystem_api callers for the primary SPC-3 TYPE_DISK + * LUN emulation code. + * + * For TCM/pSCSI and all other SCF_SCSI_DATA_SG_IO_CDB I/O tasks we + * call ->do_task() directly and let the underlying TCM subsystem plugin + * code handle the CDB emulation. + */ + if ((TRANSPORT(dev)->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV) && + (!(TASK_CMD(task)->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB))) + error = transport_emulate_control_cdb(task); + else + error = TRANSPORT(dev)->do_task(task); + + if (error != 0) { + cmd->transport_error_status = error; + atomic_set(&task->task_active, 0); + atomic_set(&cmd->transport_sent, 0); + transport_stop_tasks_for_cmd(cmd); + transport_generic_request_failure(cmd, dev, 0, 1); + } + } + + goto check_depth; + + return 0; +} + +void transport_new_cmd_failure(struct se_cmd *se_cmd) +{ + unsigned long flags; + /* + * Any unsolicited data will get dumped for failed command inside of + * the fabric plugin + */ + spin_lock_irqsave(&T_TASK(se_cmd)->t_state_lock, flags); + se_cmd->se_cmd_flags |= SCF_SE_CMD_FAILED; + se_cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + spin_unlock_irqrestore(&T_TASK(se_cmd)->t_state_lock, flags); + + CMD_TFO(se_cmd)->new_cmd_failure(se_cmd); +} + +static void transport_nop_wait_for_tasks(struct se_cmd *, int, int); + +static inline u32 transport_get_sectors_6( + unsigned char *cdb, + struct se_cmd *cmd, + int *ret) +{ + struct se_device *dev = SE_LUN(cmd)->lun_se_dev; + + /* + * Assume TYPE_DISK for non struct se_device objects. + * Use 8-bit sector value. + */ + if (!dev) + goto type_disk; + + /* + * Use 24-bit allocation length for TYPE_TAPE. + */ + if (TRANSPORT(dev)->get_device_type(dev) == TYPE_TAPE) + return (u32)(cdb[2] << 16) + (cdb[3] << 8) + cdb[4]; + + /* + * Everything else assume TYPE_DISK Sector CDB location. + * Use 8-bit sector value. + */ +type_disk: + return (u32)cdb[4]; +} + +static inline u32 transport_get_sectors_10( + unsigned char *cdb, + struct se_cmd *cmd, + int *ret) +{ + struct se_device *dev = SE_LUN(cmd)->lun_se_dev; + + /* + * Assume TYPE_DISK for non struct se_device objects. + * Use 16-bit sector value. + */ + if (!dev) + goto type_disk; + + /* + * XXX_10 is not defined in SSC, throw an exception + */ + if (TRANSPORT(dev)->get_device_type(dev) == TYPE_TAPE) { + *ret = -1; + return 0; + } + + /* + * Everything else assume TYPE_DISK Sector CDB location. + * Use 16-bit sector value. + */ +type_disk: + return (u32)(cdb[7] << 8) + cdb[8]; +} + +static inline u32 transport_get_sectors_12( + unsigned char *cdb, + struct se_cmd *cmd, + int *ret) +{ + struct se_device *dev = SE_LUN(cmd)->lun_se_dev; + + /* + * Assume TYPE_DISK for non struct se_device objects. + * Use 32-bit sector value. + */ + if (!dev) + goto type_disk; + + /* + * XXX_12 is not defined in SSC, throw an exception + */ + if (TRANSPORT(dev)->get_device_type(dev) == TYPE_TAPE) { + *ret = -1; + return 0; + } + + /* + * Everything else assume TYPE_DISK Sector CDB location. + * Use 32-bit sector value. + */ +type_disk: + return (u32)(cdb[6] << 24) + (cdb[7] << 16) + (cdb[8] << 8) + cdb[9]; +} + +static inline u32 transport_get_sectors_16( + unsigned char *cdb, + struct se_cmd *cmd, + int *ret) +{ + struct se_device *dev = SE_LUN(cmd)->lun_se_dev; + + /* + * Assume TYPE_DISK for non struct se_device objects. + * Use 32-bit sector value. + */ + if (!dev) + goto type_disk; + + /* + * Use 24-bit allocation length for TYPE_TAPE. + */ + if (TRANSPORT(dev)->get_device_type(dev) == TYPE_TAPE) + return (u32)(cdb[12] << 16) + (cdb[13] << 8) + cdb[14]; + +type_disk: + return (u32)(cdb[10] << 24) + (cdb[11] << 16) + + (cdb[12] << 8) + cdb[13]; +} + +/* + * Used for VARIABLE_LENGTH_CDB WRITE_32 and READ_32 variants + */ +static inline u32 transport_get_sectors_32( + unsigned char *cdb, + struct se_cmd *cmd, + int *ret) +{ + /* + * Assume TYPE_DISK for non struct se_device objects. + * Use 32-bit sector value. + */ + return (u32)(cdb[28] << 24) + (cdb[29] << 16) + + (cdb[30] << 8) + cdb[31]; + +} + +static inline u32 transport_get_size( + u32 sectors, + unsigned char *cdb, + struct se_cmd *cmd) +{ + struct se_device *dev = SE_DEV(cmd); + + if (TRANSPORT(dev)->get_device_type(dev) == TYPE_TAPE) { + if (cdb[1] & 1) { /* sectors */ + return DEV_ATTRIB(dev)->block_size * sectors; + } else /* bytes */ + return sectors; + } +#if 0 + printk(KERN_INFO "Returning block_size: %u, sectors: %u == %u for" + " %s object\n", DEV_ATTRIB(dev)->block_size, sectors, + DEV_ATTRIB(dev)->block_size * sectors, + TRANSPORT(dev)->name); +#endif + return DEV_ATTRIB(dev)->block_size * sectors; +} + +unsigned char transport_asciihex_to_binaryhex(unsigned char val[2]) +{ + unsigned char result = 0; + /* + * MSB + */ + if ((val[0] >= 'a') && (val[0] <= 'f')) + result = ((val[0] - 'a' + 10) & 0xf) << 4; + else + if ((val[0] >= 'A') && (val[0] <= 'F')) + result = ((val[0] - 'A' + 10) & 0xf) << 4; + else /* digit */ + result = ((val[0] - '0') & 0xf) << 4; + /* + * LSB + */ + if ((val[1] >= 'a') && (val[1] <= 'f')) + result |= ((val[1] - 'a' + 10) & 0xf); + else + if ((val[1] >= 'A') && (val[1] <= 'F')) + result |= ((val[1] - 'A' + 10) & 0xf); + else /* digit */ + result |= ((val[1] - '0') & 0xf); + + return result; +} +EXPORT_SYMBOL(transport_asciihex_to_binaryhex); + +static void transport_xor_callback(struct se_cmd *cmd) +{ + unsigned char *buf, *addr; + struct se_mem *se_mem; + unsigned int offset; + int i; + /* + * From sbc3r22.pdf section 5.48 XDWRITEREAD (10) command + * + * 1) read the specified logical block(s); + * 2) transfer logical blocks from the data-out buffer; + * 3) XOR the logical blocks transferred from the data-out buffer with + * the logical blocks read, storing the resulting XOR data in a buffer; + * 4) if the DISABLE WRITE bit is set to zero, then write the logical + * blocks transferred from the data-out buffer; and + * 5) transfer the resulting XOR data to the data-in buffer. + */ + buf = kmalloc(cmd->data_length, GFP_KERNEL); + if (!(buf)) { + printk(KERN_ERR "Unable to allocate xor_callback buf\n"); + return; + } + /* + * Copy the scatterlist WRITE buffer located at T_TASK(cmd)->t_mem_list + * into the locally allocated *buf + */ + transport_memcpy_se_mem_read_contig(cmd, buf, T_TASK(cmd)->t_mem_list); + /* + * Now perform the XOR against the BIDI read memory located at + * T_TASK(cmd)->t_mem_bidi_list + */ + + offset = 0; + list_for_each_entry(se_mem, T_TASK(cmd)->t_mem_bidi_list, se_list) { + addr = (unsigned char *)kmap_atomic(se_mem->se_page, KM_USER0); + if (!(addr)) + goto out; + + for (i = 0; i < se_mem->se_len; i++) + *(addr + se_mem->se_off + i) ^= *(buf + offset + i); + + offset += se_mem->se_len; + kunmap_atomic(addr, KM_USER0); + } +out: + kfree(buf); +} + +/* + * Used to obtain Sense Data from underlying Linux/SCSI struct scsi_cmnd + */ +static int transport_get_sense_data(struct se_cmd *cmd) +{ + unsigned char *buffer = cmd->sense_buffer, *sense_buffer = NULL; + struct se_device *dev; + struct se_task *task = NULL, *task_tmp; + unsigned long flags; + u32 offset = 0; + + if (!SE_LUN(cmd)) { + printk(KERN_ERR "SE_LUN(cmd) is NULL\n"); + return -1; + } + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) { + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + return 0; + } + + list_for_each_entry_safe(task, task_tmp, + &T_TASK(cmd)->t_task_list, t_list) { + + if (!task->task_sense) + continue; + + dev = task->se_dev; + if (!(dev)) + continue; + + if (!TRANSPORT(dev)->get_sense_buffer) { + printk(KERN_ERR "TRANSPORT(dev)->get_sense_buffer" + " is NULL\n"); + continue; + } + + sense_buffer = TRANSPORT(dev)->get_sense_buffer(task); + if (!(sense_buffer)) { + printk(KERN_ERR "ITT[0x%08x]_TASK[%d]: Unable to locate" + " sense buffer for task with sense\n", + CMD_TFO(cmd)->get_task_tag(cmd), task->task_no); + continue; + } + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + offset = CMD_TFO(cmd)->set_fabric_sense_len(cmd, + TRANSPORT_SENSE_BUFFER); + + memcpy((void *)&buffer[offset], (void *)sense_buffer, + TRANSPORT_SENSE_BUFFER); + cmd->scsi_status = task->task_scsi_status; + /* Automatically padded */ + cmd->scsi_sense_length = + (TRANSPORT_SENSE_BUFFER + offset); + + printk(KERN_INFO "HBA_[%u]_PLUG[%s]: Set SAM STATUS: 0x%02x" + " and sense\n", + dev->se_hba->hba_id, TRANSPORT(dev)->name, + cmd->scsi_status); + return 0; + } + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + return -1; +} + +static int transport_allocate_resources(struct se_cmd *cmd) +{ + u32 length = cmd->data_length; + + if ((cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) || + (cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB)) + return transport_generic_get_mem(cmd, length, PAGE_SIZE); + else if (cmd->se_cmd_flags & SCF_SCSI_CONTROL_NONSG_IO_CDB) + return transport_generic_allocate_buf(cmd, length); + else + return 0; +} + +static int +transport_handle_reservation_conflict(struct se_cmd *cmd) +{ + cmd->transport_wait_for_tasks = &transport_nop_wait_for_tasks; + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->se_cmd_flags |= SCF_SCSI_RESERVATION_CONFLICT; + cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT; + /* + * For UA Interlock Code 11b, a RESERVATION CONFLICT will + * establish a UNIT ATTENTION with PREVIOUS RESERVATION + * CONFLICT STATUS. + * + * See spc4r17, section 7.4.6 Control Mode Page, Table 349 + */ + if (SE_SESS(cmd) && + DEV_ATTRIB(cmd->se_dev)->emulate_ua_intlck_ctrl == 2) + core_scsi3_ua_allocate(SE_SESS(cmd)->se_node_acl, + cmd->orig_fe_lun, 0x2C, + ASCQ_2CH_PREVIOUS_RESERVATION_CONFLICT_STATUS); + return -2; +} + +/* transport_generic_cmd_sequencer(): + * + * Generic Command Sequencer that should work for most DAS transport + * drivers. + * + * Called from transport_generic_allocate_tasks() in the $FABRIC_MOD + * RX Thread. + * + * FIXME: Need to support other SCSI OPCODES where as well. + */ +static int transport_generic_cmd_sequencer( + struct se_cmd *cmd, + unsigned char *cdb) +{ + struct se_device *dev = SE_DEV(cmd); + struct se_subsystem_dev *su_dev = dev->se_sub_dev; + int ret = 0, sector_ret = 0, passthrough; + u32 sectors = 0, size = 0, pr_reg_type = 0; + u16 service_action; + u8 alua_ascq = 0; + /* + * Check for an existing UNIT ATTENTION condition + */ + if (core_scsi3_ua_check(cmd, cdb) < 0) { + cmd->transport_wait_for_tasks = + &transport_nop_wait_for_tasks; + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = TCM_CHECK_CONDITION_UNIT_ATTENTION; + return -2; + } + /* + * Check status of Asymmetric Logical Unit Assignment port + */ + ret = T10_ALUA(su_dev)->alua_state_check(cmd, cdb, &alua_ascq); + if (ret != 0) { + cmd->transport_wait_for_tasks = &transport_nop_wait_for_tasks; + /* + * Set SCSI additional sense code (ASC) to 'LUN Not Accessable'; + * The ALUA additional sense code qualifier (ASCQ) is determined + * by the ALUA primary or secondary access state.. + */ + if (ret > 0) { +#if 0 + printk(KERN_INFO "[%s]: ALUA TG Port not available," + " SenseKey: NOT_READY, ASC/ASCQ: 0x04/0x%02x\n", + CMD_TFO(cmd)->get_fabric_name(), alua_ascq); +#endif + transport_set_sense_codes(cmd, 0x04, alua_ascq); + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = TCM_CHECK_CONDITION_NOT_READY; + return -2; + } + goto out_invalid_cdb_field; + } + /* + * Check status for SPC-3 Persistent Reservations + */ + if (T10_PR_OPS(su_dev)->t10_reservation_check(cmd, &pr_reg_type) != 0) { + if (T10_PR_OPS(su_dev)->t10_seq_non_holder( + cmd, cdb, pr_reg_type) != 0) + return transport_handle_reservation_conflict(cmd); + /* + * This means the CDB is allowed for the SCSI Initiator port + * when said port is *NOT* holding the legacy SPC-2 or + * SPC-3 Persistent Reservation. + */ + } + + switch (cdb[0]) { + case READ_6: + sectors = transport_get_sectors_6(cdb, cmd, §or_ret); + if (sector_ret) + goto out_unsupported_cdb; + size = transport_get_size(sectors, cdb, cmd); + cmd->transport_split_cdb = &split_cdb_XX_6; + T_TASK(cmd)->t_task_lba = transport_lba_21(cdb); + cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; + break; + case READ_10: + sectors = transport_get_sectors_10(cdb, cmd, §or_ret); + if (sector_ret) + goto out_unsupported_cdb; + size = transport_get_size(sectors, cdb, cmd); + cmd->transport_split_cdb = &split_cdb_XX_10; + T_TASK(cmd)->t_task_lba = transport_lba_32(cdb); + cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; + break; + case READ_12: + sectors = transport_get_sectors_12(cdb, cmd, §or_ret); + if (sector_ret) + goto out_unsupported_cdb; + size = transport_get_size(sectors, cdb, cmd); + cmd->transport_split_cdb = &split_cdb_XX_12; + T_TASK(cmd)->t_task_lba = transport_lba_32(cdb); + cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; + break; + case READ_16: + sectors = transport_get_sectors_16(cdb, cmd, §or_ret); + if (sector_ret) + goto out_unsupported_cdb; + size = transport_get_size(sectors, cdb, cmd); + cmd->transport_split_cdb = &split_cdb_XX_16; + T_TASK(cmd)->t_task_lba = transport_lba_64(cdb); + cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; + break; + case WRITE_6: + sectors = transport_get_sectors_6(cdb, cmd, §or_ret); + if (sector_ret) + goto out_unsupported_cdb; + size = transport_get_size(sectors, cdb, cmd); + cmd->transport_split_cdb = &split_cdb_XX_6; + T_TASK(cmd)->t_task_lba = transport_lba_21(cdb); + cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; + break; + case WRITE_10: + sectors = transport_get_sectors_10(cdb, cmd, §or_ret); + if (sector_ret) + goto out_unsupported_cdb; + size = transport_get_size(sectors, cdb, cmd); + cmd->transport_split_cdb = &split_cdb_XX_10; + T_TASK(cmd)->t_task_lba = transport_lba_32(cdb); + T_TASK(cmd)->t_tasks_fua = (cdb[1] & 0x8); + cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; + break; + case WRITE_12: + sectors = transport_get_sectors_12(cdb, cmd, §or_ret); + if (sector_ret) + goto out_unsupported_cdb; + size = transport_get_size(sectors, cdb, cmd); + cmd->transport_split_cdb = &split_cdb_XX_12; + T_TASK(cmd)->t_task_lba = transport_lba_32(cdb); + T_TASK(cmd)->t_tasks_fua = (cdb[1] & 0x8); + cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; + break; + case WRITE_16: + sectors = transport_get_sectors_16(cdb, cmd, §or_ret); + if (sector_ret) + goto out_unsupported_cdb; + size = transport_get_size(sectors, cdb, cmd); + cmd->transport_split_cdb = &split_cdb_XX_16; + T_TASK(cmd)->t_task_lba = transport_lba_64(cdb); + T_TASK(cmd)->t_tasks_fua = (cdb[1] & 0x8); + cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; + break; + case XDWRITEREAD_10: + if ((cmd->data_direction != DMA_TO_DEVICE) || + !(T_TASK(cmd)->t_tasks_bidi)) + goto out_invalid_cdb_field; + sectors = transport_get_sectors_10(cdb, cmd, §or_ret); + if (sector_ret) + goto out_unsupported_cdb; + size = transport_get_size(sectors, cdb, cmd); + cmd->transport_split_cdb = &split_cdb_XX_10; + T_TASK(cmd)->t_task_lba = transport_lba_32(cdb); + cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; + passthrough = (TRANSPORT(dev)->transport_type == + TRANSPORT_PLUGIN_PHBA_PDEV); + /* + * Skip the remaining assignments for TCM/PSCSI passthrough + */ + if (passthrough) + break; + /* + * Setup BIDI XOR callback to be run during transport_generic_complete_ok() + */ + cmd->transport_complete_callback = &transport_xor_callback; + T_TASK(cmd)->t_tasks_fua = (cdb[1] & 0x8); + break; + case VARIABLE_LENGTH_CMD: + service_action = get_unaligned_be16(&cdb[8]); + /* + * Determine if this is TCM/PSCSI device and we should disable + * internal emulation for this CDB. + */ + passthrough = (TRANSPORT(dev)->transport_type == + TRANSPORT_PLUGIN_PHBA_PDEV); + + switch (service_action) { + case XDWRITEREAD_32: + sectors = transport_get_sectors_32(cdb, cmd, §or_ret); + if (sector_ret) + goto out_unsupported_cdb; + size = transport_get_size(sectors, cdb, cmd); + /* + * Use WRITE_32 and READ_32 opcodes for the emulated + * XDWRITE_READ_32 logic. + */ + cmd->transport_split_cdb = &split_cdb_XX_32; + T_TASK(cmd)->t_task_lba = transport_lba_64_ext(cdb); + cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; + + /* + * Skip the remaining assignments for TCM/PSCSI passthrough + */ + if (passthrough) + break; + + /* + * Setup BIDI XOR callback to be run during + * transport_generic_complete_ok() + */ + cmd->transport_complete_callback = &transport_xor_callback; + T_TASK(cmd)->t_tasks_fua = (cdb[10] & 0x8); + break; + case WRITE_SAME_32: + sectors = transport_get_sectors_32(cdb, cmd, §or_ret); + if (sector_ret) + goto out_unsupported_cdb; + size = transport_get_size(sectors, cdb, cmd); + T_TASK(cmd)->t_task_lba = get_unaligned_be64(&cdb[12]); + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB; + + /* + * Skip the remaining assignments for TCM/PSCSI passthrough + */ + if (passthrough) + break; + + if ((cdb[10] & 0x04) || (cdb[10] & 0x02)) { + printk(KERN_ERR "WRITE_SAME PBDATA and LBDATA" + " bits not supported for Block Discard" + " Emulation\n"); + goto out_invalid_cdb_field; + } + /* + * Currently for the emulated case we only accept + * tpws with the UNMAP=1 bit set. + */ + if (!(cdb[10] & 0x08)) { + printk(KERN_ERR "WRITE_SAME w/o UNMAP bit not" + " supported for Block Discard Emulation\n"); + goto out_invalid_cdb_field; + } + break; + default: + printk(KERN_ERR "VARIABLE_LENGTH_CMD service action" + " 0x%04x not supported\n", service_action); + goto out_unsupported_cdb; + } + break; + case 0xa3: + if (TRANSPORT(dev)->get_device_type(dev) != TYPE_ROM) { + /* MAINTENANCE_IN from SCC-2 */ + /* + * Check for emulated MI_REPORT_TARGET_PGS. + */ + if (cdb[1] == MI_REPORT_TARGET_PGS) { + cmd->transport_emulate_cdb = + (T10_ALUA(su_dev)->alua_type == + SPC3_ALUA_EMULATED) ? + &core_emulate_report_target_port_groups : + NULL; + } + size = (cdb[6] << 24) | (cdb[7] << 16) | + (cdb[8] << 8) | cdb[9]; + } else { + /* GPCMD_SEND_KEY from multi media commands */ + size = (cdb[8] << 8) + cdb[9]; + } + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case MODE_SELECT: + size = cdb[4]; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB; + break; + case MODE_SELECT_10: + size = (cdb[7] << 8) + cdb[8]; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB; + break; + case MODE_SENSE: + size = cdb[4]; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case MODE_SENSE_10: + case GPCMD_READ_BUFFER_CAPACITY: + case GPCMD_SEND_OPC: + case LOG_SELECT: + case LOG_SENSE: + size = (cdb[7] << 8) + cdb[8]; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case READ_BLOCK_LIMITS: + size = READ_BLOCK_LEN; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case GPCMD_GET_CONFIGURATION: + case GPCMD_READ_FORMAT_CAPACITIES: + case GPCMD_READ_DISC_INFO: + case GPCMD_READ_TRACK_RZONE_INFO: + size = (cdb[7] << 8) + cdb[8]; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB; + break; + case PERSISTENT_RESERVE_IN: + case PERSISTENT_RESERVE_OUT: + cmd->transport_emulate_cdb = + (T10_RES(su_dev)->res_type == + SPC3_PERSISTENT_RESERVATIONS) ? + &core_scsi3_emulate_pr : NULL; + size = (cdb[7] << 8) + cdb[8]; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case GPCMD_MECHANISM_STATUS: + case GPCMD_READ_DVD_STRUCTURE: + size = (cdb[8] << 8) + cdb[9]; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB; + break; + case READ_POSITION: + size = READ_POSITION_LEN; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case 0xa4: + if (TRANSPORT(dev)->get_device_type(dev) != TYPE_ROM) { + /* MAINTENANCE_OUT from SCC-2 + * + * Check for emulated MO_SET_TARGET_PGS. + */ + if (cdb[1] == MO_SET_TARGET_PGS) { + cmd->transport_emulate_cdb = + (T10_ALUA(su_dev)->alua_type == + SPC3_ALUA_EMULATED) ? + &core_emulate_set_target_port_groups : + NULL; + } + + size = (cdb[6] << 24) | (cdb[7] << 16) | + (cdb[8] << 8) | cdb[9]; + } else { + /* GPCMD_REPORT_KEY from multi media commands */ + size = (cdb[8] << 8) + cdb[9]; + } + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case INQUIRY: + size = (cdb[3] << 8) + cdb[4]; + /* + * Do implict HEAD_OF_QUEUE processing for INQUIRY. + * See spc4r17 section 5.3 + */ + if (SE_DEV(cmd)->dev_task_attr_type == SAM_TASK_ATTR_EMULATED) + cmd->sam_task_attr = TASK_ATTR_HOQ; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case READ_BUFFER: + size = (cdb[6] << 16) + (cdb[7] << 8) + cdb[8]; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case READ_CAPACITY: + size = READ_CAP_LEN; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case READ_MEDIA_SERIAL_NUMBER: + case SECURITY_PROTOCOL_IN: + case SECURITY_PROTOCOL_OUT: + size = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9]; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case SERVICE_ACTION_IN: + case ACCESS_CONTROL_IN: + case ACCESS_CONTROL_OUT: + case EXTENDED_COPY: + case READ_ATTRIBUTE: + case RECEIVE_COPY_RESULTS: + case WRITE_ATTRIBUTE: + size = (cdb[10] << 24) | (cdb[11] << 16) | + (cdb[12] << 8) | cdb[13]; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case RECEIVE_DIAGNOSTIC: + case SEND_DIAGNOSTIC: + size = (cdb[3] << 8) | cdb[4]; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; +/* #warning FIXME: Figure out correct GPCMD_READ_CD blocksize. */ +#if 0 + case GPCMD_READ_CD: + sectors = (cdb[6] << 16) + (cdb[7] << 8) + cdb[8]; + size = (2336 * sectors); + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; +#endif + case READ_TOC: + size = cdb[8]; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case REQUEST_SENSE: + size = cdb[4]; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case READ_ELEMENT_STATUS: + size = 65536 * cdb[7] + 256 * cdb[8] + cdb[9]; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case WRITE_BUFFER: + size = (cdb[6] << 16) + (cdb[7] << 8) + cdb[8]; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case RESERVE: + case RESERVE_10: + /* + * The SPC-2 RESERVE does not contain a size in the SCSI CDB. + * Assume the passthrough or $FABRIC_MOD will tell us about it. + */ + if (cdb[0] == RESERVE_10) + size = (cdb[7] << 8) | cdb[8]; + else + size = cmd->data_length; + + /* + * Setup the legacy emulated handler for SPC-2 and + * >= SPC-3 compatible reservation handling (CRH=1) + * Otherwise, we assume the underlying SCSI logic is + * is running in SPC_PASSTHROUGH, and wants reservations + * emulation disabled. + */ + cmd->transport_emulate_cdb = + (T10_RES(su_dev)->res_type != + SPC_PASSTHROUGH) ? + &core_scsi2_emulate_crh : NULL; + cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB; + break; + case RELEASE: + case RELEASE_10: + /* + * The SPC-2 RELEASE does not contain a size in the SCSI CDB. + * Assume the passthrough or $FABRIC_MOD will tell us about it. + */ + if (cdb[0] == RELEASE_10) + size = (cdb[7] << 8) | cdb[8]; + else + size = cmd->data_length; + + cmd->transport_emulate_cdb = + (T10_RES(su_dev)->res_type != + SPC_PASSTHROUGH) ? + &core_scsi2_emulate_crh : NULL; + cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB; + break; + case SYNCHRONIZE_CACHE: + case 0x91: /* SYNCHRONIZE_CACHE_16: */ + /* + * Extract LBA and range to be flushed for emulated SYNCHRONIZE_CACHE + */ + if (cdb[0] == SYNCHRONIZE_CACHE) { + sectors = transport_get_sectors_10(cdb, cmd, §or_ret); + T_TASK(cmd)->t_task_lba = transport_lba_32(cdb); + } else { + sectors = transport_get_sectors_16(cdb, cmd, §or_ret); + T_TASK(cmd)->t_task_lba = transport_lba_64(cdb); + } + if (sector_ret) + goto out_unsupported_cdb; + + size = transport_get_size(sectors, cdb, cmd); + cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB; + + /* + * For TCM/pSCSI passthrough, skip cmd->transport_emulate_cdb() + */ + if (TRANSPORT(dev)->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV) + break; + /* + * Set SCF_EMULATE_CDB_ASYNC to ensure asynchronous operation + * for SYNCHRONIZE_CACHE* Immed=1 case in __transport_execute_tasks() + */ + cmd->se_cmd_flags |= SCF_EMULATE_CDB_ASYNC; + /* + * Check to ensure that LBA + Range does not exceed past end of + * device. + */ + if (transport_get_sectors(cmd) < 0) + goto out_invalid_cdb_field; + break; + case UNMAP: + size = get_unaligned_be16(&cdb[7]); + passthrough = (TRANSPORT(dev)->transport_type == + TRANSPORT_PLUGIN_PHBA_PDEV); + /* + * Determine if the received UNMAP used to for direct passthrough + * into Linux/SCSI with struct request via TCM/pSCSI or we are + * signaling the use of internal transport_generic_unmap() emulation + * for UNMAP -> Linux/BLOCK disbard with TCM/IBLOCK and TCM/FILEIO + * subsystem plugin backstores. + */ + if (!(passthrough)) + cmd->se_cmd_flags |= SCF_EMULATE_SYNC_UNMAP; + + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + case WRITE_SAME_16: + sectors = transport_get_sectors_16(cdb, cmd, §or_ret); + if (sector_ret) + goto out_unsupported_cdb; + size = transport_get_size(sectors, cdb, cmd); + T_TASK(cmd)->t_task_lba = get_unaligned_be16(&cdb[2]); + passthrough = (TRANSPORT(dev)->transport_type == + TRANSPORT_PLUGIN_PHBA_PDEV); + /* + * Determine if the received WRITE_SAME_16 is used to for direct + * passthrough into Linux/SCSI with struct request via TCM/pSCSI + * or we are signaling the use of internal WRITE_SAME + UNMAP=1 + * emulation for -> Linux/BLOCK disbard with TCM/IBLOCK and + * TCM/FILEIO subsystem plugin backstores. + */ + if (!(passthrough)) { + if ((cdb[1] & 0x04) || (cdb[1] & 0x02)) { + printk(KERN_ERR "WRITE_SAME PBDATA and LBDATA" + " bits not supported for Block Discard" + " Emulation\n"); + goto out_invalid_cdb_field; + } + /* + * Currently for the emulated case we only accept + * tpws with the UNMAP=1 bit set. + */ + if (!(cdb[1] & 0x08)) { + printk(KERN_ERR "WRITE_SAME w/o UNMAP bit not " + " supported for Block Discard Emulation\n"); + goto out_invalid_cdb_field; + } + } + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB; + break; + case ALLOW_MEDIUM_REMOVAL: + case GPCMD_CLOSE_TRACK: + case ERASE: + case INITIALIZE_ELEMENT_STATUS: + case GPCMD_LOAD_UNLOAD: + case REZERO_UNIT: + case SEEK_10: + case GPCMD_SET_SPEED: + case SPACE: + case START_STOP: + case TEST_UNIT_READY: + case VERIFY: + case WRITE_FILEMARKS: + case MOVE_MEDIUM: + cmd->se_cmd_flags |= SCF_SCSI_NON_DATA_CDB; + break; + case REPORT_LUNS: + cmd->transport_emulate_cdb = + &transport_core_report_lun_response; + size = (cdb[6] << 24) | (cdb[7] << 16) | (cdb[8] << 8) | cdb[9]; + /* + * Do implict HEAD_OF_QUEUE processing for REPORT_LUNS + * See spc4r17 section 5.3 + */ + if (SE_DEV(cmd)->dev_task_attr_type == SAM_TASK_ATTR_EMULATED) + cmd->sam_task_attr = TASK_ATTR_HOQ; + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; + break; + default: + printk(KERN_WARNING "TARGET_CORE[%s]: Unsupported SCSI Opcode" + " 0x%02x, sending CHECK_CONDITION.\n", + CMD_TFO(cmd)->get_fabric_name(), cdb[0]); + cmd->transport_wait_for_tasks = &transport_nop_wait_for_tasks; + goto out_unsupported_cdb; + } + + if (size != cmd->data_length) { + printk(KERN_WARNING "TARGET_CORE[%s]: Expected Transfer Length:" + " %u does not match SCSI CDB Length: %u for SAM Opcode:" + " 0x%02x\n", CMD_TFO(cmd)->get_fabric_name(), + cmd->data_length, size, cdb[0]); + + cmd->cmd_spdtl = size; + + if (cmd->data_direction == DMA_TO_DEVICE) { + printk(KERN_ERR "Rejecting underflow/overflow" + " WRITE data\n"); + goto out_invalid_cdb_field; + } + /* + * Reject READ_* or WRITE_* with overflow/underflow for + * type SCF_SCSI_DATA_SG_IO_CDB. + */ + if (!(ret) && (DEV_ATTRIB(dev)->block_size != 512)) { + printk(KERN_ERR "Failing OVERFLOW/UNDERFLOW for LBA op" + " CDB on non 512-byte sector setup subsystem" + " plugin: %s\n", TRANSPORT(dev)->name); + /* Returns CHECK_CONDITION + INVALID_CDB_FIELD */ + goto out_invalid_cdb_field; + } + + if (size > cmd->data_length) { + cmd->se_cmd_flags |= SCF_OVERFLOW_BIT; + cmd->residual_count = (size - cmd->data_length); + } else { + cmd->se_cmd_flags |= SCF_UNDERFLOW_BIT; + cmd->residual_count = (cmd->data_length - size); + } + cmd->data_length = size; + } + + transport_set_supported_SAM_opcode(cmd); + return ret; + +out_unsupported_cdb: + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + return -2; +out_invalid_cdb_field: + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -2; +} + +static inline void transport_release_tasks(struct se_cmd *); + +/* + * This function will copy a contiguous *src buffer into a destination + * struct scatterlist array. + */ +static void transport_memcpy_write_contig( + struct se_cmd *cmd, + struct scatterlist *sg_d, + unsigned char *src) +{ + u32 i = 0, length = 0, total_length = cmd->data_length; + void *dst; + + while (total_length) { + length = sg_d[i].length; + + if (length > total_length) + length = total_length; + + dst = sg_virt(&sg_d[i]); + + memcpy(dst, src, length); + + if (!(total_length -= length)) + return; + + src += length; + i++; + } +} + +/* + * This function will copy a struct scatterlist array *sg_s into a destination + * contiguous *dst buffer. + */ +static void transport_memcpy_read_contig( + struct se_cmd *cmd, + unsigned char *dst, + struct scatterlist *sg_s) +{ + u32 i = 0, length = 0, total_length = cmd->data_length; + void *src; + + while (total_length) { + length = sg_s[i].length; + + if (length > total_length) + length = total_length; + + src = sg_virt(&sg_s[i]); + + memcpy(dst, src, length); + + if (!(total_length -= length)) + return; + + dst += length; + i++; + } +} + +static void transport_memcpy_se_mem_read_contig( + struct se_cmd *cmd, + unsigned char *dst, + struct list_head *se_mem_list) +{ + struct se_mem *se_mem; + void *src; + u32 length = 0, total_length = cmd->data_length; + + list_for_each_entry(se_mem, se_mem_list, se_list) { + length = se_mem->se_len; + + if (length > total_length) + length = total_length; + + src = page_address(se_mem->se_page) + se_mem->se_off; + + memcpy(dst, src, length); + + if (!(total_length -= length)) + return; + + dst += length; + } +} + +/* + * Called from transport_generic_complete_ok() and + * transport_generic_request_failure() to determine which dormant/delayed + * and ordered cmds need to have their tasks added to the execution queue. + */ +static void transport_complete_task_attr(struct se_cmd *cmd) +{ + struct se_device *dev = SE_DEV(cmd); + struct se_cmd *cmd_p, *cmd_tmp; + int new_active_tasks = 0; + + if (cmd->sam_task_attr == TASK_ATTR_SIMPLE) { + atomic_dec(&dev->simple_cmds); + smp_mb__after_atomic_dec(); + dev->dev_cur_ordered_id++; + DEBUG_STA("Incremented dev->dev_cur_ordered_id: %u for" + " SIMPLE: %u\n", dev->dev_cur_ordered_id, + cmd->se_ordered_id); + } else if (cmd->sam_task_attr == TASK_ATTR_HOQ) { + atomic_dec(&dev->dev_hoq_count); + smp_mb__after_atomic_dec(); + dev->dev_cur_ordered_id++; + DEBUG_STA("Incremented dev_cur_ordered_id: %u for" + " HEAD_OF_QUEUE: %u\n", dev->dev_cur_ordered_id, + cmd->se_ordered_id); + } else if (cmd->sam_task_attr == TASK_ATTR_ORDERED) { + spin_lock(&dev->ordered_cmd_lock); + list_del(&cmd->se_ordered_list); + atomic_dec(&dev->dev_ordered_sync); + smp_mb__after_atomic_dec(); + spin_unlock(&dev->ordered_cmd_lock); + + dev->dev_cur_ordered_id++; + DEBUG_STA("Incremented dev_cur_ordered_id: %u for ORDERED:" + " %u\n", dev->dev_cur_ordered_id, cmd->se_ordered_id); + } + /* + * Process all commands up to the last received + * ORDERED task attribute which requires another blocking + * boundary + */ + spin_lock(&dev->delayed_cmd_lock); + list_for_each_entry_safe(cmd_p, cmd_tmp, + &dev->delayed_cmd_list, se_delayed_list) { + + list_del(&cmd_p->se_delayed_list); + spin_unlock(&dev->delayed_cmd_lock); + + DEBUG_STA("Calling add_tasks() for" + " cmd_p: 0x%02x Task Attr: 0x%02x" + " Dormant -> Active, se_ordered_id: %u\n", + T_TASK(cmd_p)->t_task_cdb[0], + cmd_p->sam_task_attr, cmd_p->se_ordered_id); + + transport_add_tasks_from_cmd(cmd_p); + new_active_tasks++; + + spin_lock(&dev->delayed_cmd_lock); + if (cmd_p->sam_task_attr == TASK_ATTR_ORDERED) + break; + } + spin_unlock(&dev->delayed_cmd_lock); + /* + * If new tasks have become active, wake up the transport thread + * to do the processing of the Active tasks. + */ + if (new_active_tasks != 0) + wake_up_interruptible(&dev->dev_queue_obj->thread_wq); +} + +static void transport_generic_complete_ok(struct se_cmd *cmd) +{ + int reason = 0; + /* + * Check if we need to move delayed/dormant tasks from cmds on the + * delayed execution list after a HEAD_OF_QUEUE or ORDERED Task + * Attribute. + */ + if (SE_DEV(cmd)->dev_task_attr_type == SAM_TASK_ATTR_EMULATED) + transport_complete_task_attr(cmd); + /* + * Check if we need to retrieve a sense buffer from + * the struct se_cmd in question. + */ + if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) { + if (transport_get_sense_data(cmd) < 0) + reason = TCM_NON_EXISTENT_LUN; + + /* + * Only set when an struct se_task->task_scsi_status returned + * a non GOOD status. + */ + if (cmd->scsi_status) { + transport_send_check_condition_and_sense( + cmd, reason, 1); + transport_lun_remove_cmd(cmd); + transport_cmd_check_stop_to_fabric(cmd); + return; + } + } + /* + * Check for a callback, used by amoungst other things + * XDWRITE_READ_10 emulation. + */ + if (cmd->transport_complete_callback) + cmd->transport_complete_callback(cmd); + + switch (cmd->data_direction) { + case DMA_FROM_DEVICE: + spin_lock(&cmd->se_lun->lun_sep_lock); + if (SE_LUN(cmd)->lun_sep) { + SE_LUN(cmd)->lun_sep->sep_stats.tx_data_octets += + cmd->data_length; + } + spin_unlock(&cmd->se_lun->lun_sep_lock); + /* + * If enabled by TCM fabirc module pre-registered SGL + * memory, perform the memcpy() from the TCM internal + * contigious buffer back to the original SGL. + */ + if (cmd->se_cmd_flags & SCF_PASSTHROUGH_CONTIG_TO_SG) + transport_memcpy_write_contig(cmd, + T_TASK(cmd)->t_task_pt_sgl, + T_TASK(cmd)->t_task_buf); + + CMD_TFO(cmd)->queue_data_in(cmd); + break; + case DMA_TO_DEVICE: + spin_lock(&cmd->se_lun->lun_sep_lock); + if (SE_LUN(cmd)->lun_sep) { + SE_LUN(cmd)->lun_sep->sep_stats.rx_data_octets += + cmd->data_length; + } + spin_unlock(&cmd->se_lun->lun_sep_lock); + /* + * Check if we need to send READ payload for BIDI-COMMAND + */ + if (T_TASK(cmd)->t_mem_bidi_list != NULL) { + spin_lock(&cmd->se_lun->lun_sep_lock); + if (SE_LUN(cmd)->lun_sep) { + SE_LUN(cmd)->lun_sep->sep_stats.tx_data_octets += + cmd->data_length; + } + spin_unlock(&cmd->se_lun->lun_sep_lock); + CMD_TFO(cmd)->queue_data_in(cmd); + break; + } + /* Fall through for DMA_TO_DEVICE */ + case DMA_NONE: + CMD_TFO(cmd)->queue_status(cmd); + break; + default: + break; + } + + transport_lun_remove_cmd(cmd); + transport_cmd_check_stop_to_fabric(cmd); +} + +static void transport_free_dev_tasks(struct se_cmd *cmd) +{ + struct se_task *task, *task_tmp; + unsigned long flags; + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + list_for_each_entry_safe(task, task_tmp, + &T_TASK(cmd)->t_task_list, t_list) { + if (atomic_read(&task->task_active)) + continue; + + kfree(task->task_sg_bidi); + kfree(task->task_sg); + + list_del(&task->t_list); + + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + if (task->se_dev) + TRANSPORT(task->se_dev)->free_task(task); + else + printk(KERN_ERR "task[%u] - task->se_dev is NULL\n", + task->task_no); + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + } + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); +} + +static inline void transport_free_pages(struct se_cmd *cmd) +{ + struct se_mem *se_mem, *se_mem_tmp; + int free_page = 1; + + if (cmd->se_cmd_flags & SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC) + free_page = 0; + if (cmd->se_dev->transport->do_se_mem_map) + free_page = 0; + + if (T_TASK(cmd)->t_task_buf) { + kfree(T_TASK(cmd)->t_task_buf); + T_TASK(cmd)->t_task_buf = NULL; + return; + } + + /* + * Caller will handle releasing of struct se_mem. + */ + if (cmd->se_cmd_flags & SCF_CMD_PASSTHROUGH_NOALLOC) + return; + + if (!(T_TASK(cmd)->t_tasks_se_num)) + return; + + list_for_each_entry_safe(se_mem, se_mem_tmp, + T_TASK(cmd)->t_mem_list, se_list) { + /* + * We only release call __free_page(struct se_mem->se_page) when + * SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC is NOT in use, + */ + if (free_page) + __free_page(se_mem->se_page); + + list_del(&se_mem->se_list); + kmem_cache_free(se_mem_cache, se_mem); + } + + if (T_TASK(cmd)->t_mem_bidi_list && T_TASK(cmd)->t_tasks_se_bidi_num) { + list_for_each_entry_safe(se_mem, se_mem_tmp, + T_TASK(cmd)->t_mem_bidi_list, se_list) { + /* + * We only release call __free_page(struct se_mem->se_page) when + * SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC is NOT in use, + */ + if (free_page) + __free_page(se_mem->se_page); + + list_del(&se_mem->se_list); + kmem_cache_free(se_mem_cache, se_mem); + } + } + + kfree(T_TASK(cmd)->t_mem_bidi_list); + T_TASK(cmd)->t_mem_bidi_list = NULL; + kfree(T_TASK(cmd)->t_mem_list); + T_TASK(cmd)->t_mem_list = NULL; + T_TASK(cmd)->t_tasks_se_num = 0; +} + +static inline void transport_release_tasks(struct se_cmd *cmd) +{ + transport_free_dev_tasks(cmd); +} + +static inline int transport_dec_and_check(struct se_cmd *cmd) +{ + unsigned long flags; + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + if (atomic_read(&T_TASK(cmd)->t_fe_count)) { + if (!(atomic_dec_and_test(&T_TASK(cmd)->t_fe_count))) { + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, + flags); + return 1; + } + } + + if (atomic_read(&T_TASK(cmd)->t_se_count)) { + if (!(atomic_dec_and_test(&T_TASK(cmd)->t_se_count))) { + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, + flags); + return 1; + } + } + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + return 0; +} + +static void transport_release_fe_cmd(struct se_cmd *cmd) +{ + unsigned long flags; + + if (transport_dec_and_check(cmd)) + return; + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + if (!(atomic_read(&T_TASK(cmd)->transport_dev_active))) { + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + goto free_pages; + } + atomic_set(&T_TASK(cmd)->transport_dev_active, 0); + transport_all_task_dev_remove_state(cmd); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + transport_release_tasks(cmd); +free_pages: + transport_free_pages(cmd); + transport_free_se_cmd(cmd); + CMD_TFO(cmd)->release_cmd_direct(cmd); +} + +static int transport_generic_remove( + struct se_cmd *cmd, + int release_to_pool, + int session_reinstatement) +{ + unsigned long flags; + + if (!(T_TASK(cmd))) + goto release_cmd; + + if (transport_dec_and_check(cmd)) { + if (session_reinstatement) { + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + transport_all_task_dev_remove_state(cmd); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, + flags); + } + return 1; + } + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + if (!(atomic_read(&T_TASK(cmd)->transport_dev_active))) { + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + goto free_pages; + } + atomic_set(&T_TASK(cmd)->transport_dev_active, 0); + transport_all_task_dev_remove_state(cmd); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + transport_release_tasks(cmd); +free_pages: + transport_free_pages(cmd); + +release_cmd: + if (release_to_pool) { + transport_release_cmd_to_pool(cmd); + } else { + transport_free_se_cmd(cmd); + CMD_TFO(cmd)->release_cmd_direct(cmd); + } + + return 0; +} + +/* + * transport_generic_map_mem_to_cmd - Perform SGL -> struct se_mem map + * @cmd: Associated se_cmd descriptor + * @mem: SGL style memory for TCM WRITE / READ + * @sg_mem_num: Number of SGL elements + * @mem_bidi_in: SGL style memory for TCM BIDI READ + * @sg_mem_bidi_num: Number of BIDI READ SGL elements + * + * Return: nonzero return cmd was rejected for -ENOMEM or inproper usage + * of parameters. + */ +int transport_generic_map_mem_to_cmd( + struct se_cmd *cmd, + struct scatterlist *mem, + u32 sg_mem_num, + struct scatterlist *mem_bidi_in, + u32 sg_mem_bidi_num) +{ + u32 se_mem_cnt_out = 0; + int ret; + + if (!(mem) || !(sg_mem_num)) + return 0; + /* + * Passed *mem will contain a list_head containing preformatted + * struct se_mem elements... + */ + if (!(cmd->se_cmd_flags & SCF_PASSTHROUGH_SG_TO_MEM)) { + if ((mem_bidi_in) || (sg_mem_bidi_num)) { + printk(KERN_ERR "SCF_CMD_PASSTHROUGH_NOALLOC not supported" + " with BIDI-COMMAND\n"); + return -ENOSYS; + } + + T_TASK(cmd)->t_mem_list = (struct list_head *)mem; + T_TASK(cmd)->t_tasks_se_num = sg_mem_num; + cmd->se_cmd_flags |= SCF_CMD_PASSTHROUGH_NOALLOC; + return 0; + } + /* + * Otherwise, assume the caller is passing a struct scatterlist + * array from include/linux/scatterlist.h + */ + if ((cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) || + (cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB)) { + /* + * For CDB using TCM struct se_mem linked list scatterlist memory + * processed into a TCM struct se_subsystem_dev, we do the mapping + * from the passed physical memory to struct se_mem->se_page here. + */ + T_TASK(cmd)->t_mem_list = transport_init_se_mem_list(); + if (!(T_TASK(cmd)->t_mem_list)) + return -ENOMEM; + + ret = transport_map_sg_to_mem(cmd, + T_TASK(cmd)->t_mem_list, mem, &se_mem_cnt_out); + if (ret < 0) + return -ENOMEM; + + T_TASK(cmd)->t_tasks_se_num = se_mem_cnt_out; + /* + * Setup BIDI READ list of struct se_mem elements + */ + if ((mem_bidi_in) && (sg_mem_bidi_num)) { + T_TASK(cmd)->t_mem_bidi_list = transport_init_se_mem_list(); + if (!(T_TASK(cmd)->t_mem_bidi_list)) { + kfree(T_TASK(cmd)->t_mem_list); + return -ENOMEM; + } + se_mem_cnt_out = 0; + + ret = transport_map_sg_to_mem(cmd, + T_TASK(cmd)->t_mem_bidi_list, mem_bidi_in, + &se_mem_cnt_out); + if (ret < 0) { + kfree(T_TASK(cmd)->t_mem_list); + return -ENOMEM; + } + + T_TASK(cmd)->t_tasks_se_bidi_num = se_mem_cnt_out; + } + cmd->se_cmd_flags |= SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC; + + } else if (cmd->se_cmd_flags & SCF_SCSI_CONTROL_NONSG_IO_CDB) { + if (mem_bidi_in || sg_mem_bidi_num) { + printk(KERN_ERR "BIDI-Commands not supported using " + "SCF_SCSI_CONTROL_NONSG_IO_CDB\n"); + return -ENOSYS; + } + /* + * For incoming CDBs using a contiguous buffer internall with TCM, + * save the passed struct scatterlist memory. After TCM storage object + * processing has completed for this struct se_cmd, TCM core will call + * transport_memcpy_[write,read]_contig() as necessary from + * transport_generic_complete_ok() and transport_write_pending() in order + * to copy the TCM buffer to/from the original passed *mem in SGL -> + * struct scatterlist format. + */ + cmd->se_cmd_flags |= SCF_PASSTHROUGH_CONTIG_TO_SG; + T_TASK(cmd)->t_task_pt_sgl = mem; + } + + return 0; +} +EXPORT_SYMBOL(transport_generic_map_mem_to_cmd); + + +static inline long long transport_dev_end_lba(struct se_device *dev) +{ + return dev->transport->get_blocks(dev) + 1; +} + +static int transport_get_sectors(struct se_cmd *cmd) +{ + struct se_device *dev = SE_DEV(cmd); + + T_TASK(cmd)->t_tasks_sectors = + (cmd->data_length / DEV_ATTRIB(dev)->block_size); + if (!(T_TASK(cmd)->t_tasks_sectors)) + T_TASK(cmd)->t_tasks_sectors = 1; + + if (TRANSPORT(dev)->get_device_type(dev) != TYPE_DISK) + return 0; + + if ((T_TASK(cmd)->t_task_lba + T_TASK(cmd)->t_tasks_sectors) > + transport_dev_end_lba(dev)) { + printk(KERN_ERR "LBA: %llu Sectors: %u exceeds" + " transport_dev_end_lba(): %llu\n", + T_TASK(cmd)->t_task_lba, T_TASK(cmd)->t_tasks_sectors, + transport_dev_end_lba(dev)); + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = TCM_SECTOR_COUNT_TOO_MANY; + return PYX_TRANSPORT_REQ_TOO_MANY_SECTORS; + } + + return 0; +} + +static int transport_new_cmd_obj(struct se_cmd *cmd) +{ + struct se_device *dev = SE_DEV(cmd); + u32 task_cdbs = 0, rc; + + if (!(cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)) { + task_cdbs++; + T_TASK(cmd)->t_task_cdbs++; + } else { + int set_counts = 1; + + /* + * Setup any BIDI READ tasks and memory from + * T_TASK(cmd)->t_mem_bidi_list so the READ struct se_tasks + * are queued first for the non pSCSI passthrough case. + */ + if ((T_TASK(cmd)->t_mem_bidi_list != NULL) && + (TRANSPORT(dev)->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV)) { + rc = transport_generic_get_cdb_count(cmd, + T_TASK(cmd)->t_task_lba, + T_TASK(cmd)->t_tasks_sectors, + DMA_FROM_DEVICE, T_TASK(cmd)->t_mem_bidi_list, + set_counts); + if (!(rc)) { + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + set_counts = 0; + } + /* + * Setup the tasks and memory from T_TASK(cmd)->t_mem_list + * Note for BIDI transfers this will contain the WRITE payload + */ + task_cdbs = transport_generic_get_cdb_count(cmd, + T_TASK(cmd)->t_task_lba, + T_TASK(cmd)->t_tasks_sectors, + cmd->data_direction, T_TASK(cmd)->t_mem_list, + set_counts); + if (!(task_cdbs)) { + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return PYX_TRANSPORT_LU_COMM_FAILURE; + } + T_TASK(cmd)->t_task_cdbs += task_cdbs; + +#if 0 + printk(KERN_INFO "data_length: %u, LBA: %llu t_tasks_sectors:" + " %u, t_task_cdbs: %u\n", obj_ptr, cmd->data_length, + T_TASK(cmd)->t_task_lba, T_TASK(cmd)->t_tasks_sectors, + T_TASK(cmd)->t_task_cdbs); +#endif + } + + atomic_set(&T_TASK(cmd)->t_task_cdbs_left, task_cdbs); + atomic_set(&T_TASK(cmd)->t_task_cdbs_ex_left, task_cdbs); + atomic_set(&T_TASK(cmd)->t_task_cdbs_timeout_left, task_cdbs); + return 0; +} + +static struct list_head *transport_init_se_mem_list(void) +{ + struct list_head *se_mem_list; + + se_mem_list = kzalloc(sizeof(struct list_head), GFP_KERNEL); + if (!(se_mem_list)) { + printk(KERN_ERR "Unable to allocate memory for se_mem_list\n"); + return NULL; + } + INIT_LIST_HEAD(se_mem_list); + + return se_mem_list; +} + +static int +transport_generic_get_mem(struct se_cmd *cmd, u32 length, u32 dma_size) +{ + unsigned char *buf; + struct se_mem *se_mem; + + T_TASK(cmd)->t_mem_list = transport_init_se_mem_list(); + if (!(T_TASK(cmd)->t_mem_list)) + return -ENOMEM; + + /* + * If the device uses memory mapping this is enough. + */ + if (cmd->se_dev->transport->do_se_mem_map) + return 0; + + /* + * Setup BIDI-COMMAND READ list of struct se_mem elements + */ + if (T_TASK(cmd)->t_tasks_bidi) { + T_TASK(cmd)->t_mem_bidi_list = transport_init_se_mem_list(); + if (!(T_TASK(cmd)->t_mem_bidi_list)) { + kfree(T_TASK(cmd)->t_mem_list); + return -ENOMEM; + } + } + + while (length) { + se_mem = kmem_cache_zalloc(se_mem_cache, GFP_KERNEL); + if (!(se_mem)) { + printk(KERN_ERR "Unable to allocate struct se_mem\n"); + goto out; + } + INIT_LIST_HEAD(&se_mem->se_list); + se_mem->se_len = (length > dma_size) ? dma_size : length; + +/* #warning FIXME Allocate contigous pages for struct se_mem elements */ + se_mem->se_page = (struct page *) alloc_pages(GFP_KERNEL, 0); + if (!(se_mem->se_page)) { + printk(KERN_ERR "alloc_pages() failed\n"); + goto out; + } + + buf = kmap_atomic(se_mem->se_page, KM_IRQ0); + if (!(buf)) { + printk(KERN_ERR "kmap_atomic() failed\n"); + goto out; + } + memset(buf, 0, se_mem->se_len); + kunmap_atomic(buf, KM_IRQ0); + + list_add_tail(&se_mem->se_list, T_TASK(cmd)->t_mem_list); + T_TASK(cmd)->t_tasks_se_num++; + + DEBUG_MEM("Allocated struct se_mem page(%p) Length(%u)" + " Offset(%u)\n", se_mem->se_page, se_mem->se_len, + se_mem->se_off); + + length -= se_mem->se_len; + } + + DEBUG_MEM("Allocated total struct se_mem elements(%u)\n", + T_TASK(cmd)->t_tasks_se_num); + + return 0; +out: + return -1; +} + +extern u32 transport_calc_sg_num( + struct se_task *task, + struct se_mem *in_se_mem, + u32 task_offset) +{ + struct se_cmd *se_cmd = task->task_se_cmd; + struct se_device *se_dev = SE_DEV(se_cmd); + struct se_mem *se_mem = in_se_mem; + struct target_core_fabric_ops *tfo = CMD_TFO(se_cmd); + u32 sg_length, task_size = task->task_size, task_sg_num_padded; + + while (task_size != 0) { + DEBUG_SC("se_mem->se_page(%p) se_mem->se_len(%u)" + " se_mem->se_off(%u) task_offset(%u)\n", + se_mem->se_page, se_mem->se_len, + se_mem->se_off, task_offset); + + if (task_offset == 0) { + if (task_size >= se_mem->se_len) { + sg_length = se_mem->se_len; + + if (!(list_is_last(&se_mem->se_list, + T_TASK(se_cmd)->t_mem_list))) + se_mem = list_entry(se_mem->se_list.next, + struct se_mem, se_list); + } else { + sg_length = task_size; + task_size -= sg_length; + goto next; + } + + DEBUG_SC("sg_length(%u) task_size(%u)\n", + sg_length, task_size); + } else { + if ((se_mem->se_len - task_offset) > task_size) { + sg_length = task_size; + task_size -= sg_length; + goto next; + } else { + sg_length = (se_mem->se_len - task_offset); + + if (!(list_is_last(&se_mem->se_list, + T_TASK(se_cmd)->t_mem_list))) + se_mem = list_entry(se_mem->se_list.next, + struct se_mem, se_list); + } + + DEBUG_SC("sg_length(%u) task_size(%u)\n", + sg_length, task_size); + + task_offset = 0; + } + task_size -= sg_length; +next: + DEBUG_SC("task[%u] - Reducing task_size to(%u)\n", + task->task_no, task_size); + + task->task_sg_num++; + } + /* + * Check if the fabric module driver is requesting that all + * struct se_task->task_sg[] be chained together.. If so, + * then allocate an extra padding SG entry for linking and + * marking the end of the chained SGL. + */ + if (tfo->task_sg_chaining) { + task_sg_num_padded = (task->task_sg_num + 1); + task->task_padded_sg = 1; + } else + task_sg_num_padded = task->task_sg_num; + + task->task_sg = kzalloc(task_sg_num_padded * + sizeof(struct scatterlist), GFP_KERNEL); + if (!(task->task_sg)) { + printk(KERN_ERR "Unable to allocate memory for" + " task->task_sg\n"); + return 0; + } + sg_init_table(&task->task_sg[0], task_sg_num_padded); + /* + * Setup task->task_sg_bidi for SCSI READ payload for + * TCM/pSCSI passthrough if present for BIDI-COMMAND + */ + if ((T_TASK(se_cmd)->t_mem_bidi_list != NULL) && + (TRANSPORT(se_dev)->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV)) { + task->task_sg_bidi = kzalloc(task_sg_num_padded * + sizeof(struct scatterlist), GFP_KERNEL); + if (!(task->task_sg_bidi)) { + printk(KERN_ERR "Unable to allocate memory for" + " task->task_sg_bidi\n"); + return 0; + } + sg_init_table(&task->task_sg_bidi[0], task_sg_num_padded); + } + /* + * For the chaining case, setup the proper end of SGL for the + * initial submission struct task into struct se_subsystem_api. + * This will be cleared later by transport_do_task_sg_chain() + */ + if (task->task_padded_sg) { + sg_mark_end(&task->task_sg[task->task_sg_num - 1]); + /* + * Added the 'if' check before marking end of bi-directional + * scatterlist (which gets created only in case of request + * (RD + WR). + */ + if (task->task_sg_bidi) + sg_mark_end(&task->task_sg_bidi[task->task_sg_num - 1]); + } + + DEBUG_SC("Successfully allocated task->task_sg_num(%u)," + " task_sg_num_padded(%u)\n", task->task_sg_num, + task_sg_num_padded); + + return task->task_sg_num; +} + +static inline int transport_set_tasks_sectors_disk( + struct se_task *task, + struct se_device *dev, + unsigned long long lba, + u32 sectors, + int *max_sectors_set) +{ + if ((lba + sectors) > transport_dev_end_lba(dev)) { + task->task_sectors = ((transport_dev_end_lba(dev) - lba) + 1); + + if (task->task_sectors > DEV_ATTRIB(dev)->max_sectors) { + task->task_sectors = DEV_ATTRIB(dev)->max_sectors; + *max_sectors_set = 1; + } + } else { + if (sectors > DEV_ATTRIB(dev)->max_sectors) { + task->task_sectors = DEV_ATTRIB(dev)->max_sectors; + *max_sectors_set = 1; + } else + task->task_sectors = sectors; + } + + return 0; +} + +static inline int transport_set_tasks_sectors_non_disk( + struct se_task *task, + struct se_device *dev, + unsigned long long lba, + u32 sectors, + int *max_sectors_set) +{ + if (sectors > DEV_ATTRIB(dev)->max_sectors) { + task->task_sectors = DEV_ATTRIB(dev)->max_sectors; + *max_sectors_set = 1; + } else + task->task_sectors = sectors; + + return 0; +} + +static inline int transport_set_tasks_sectors( + struct se_task *task, + struct se_device *dev, + unsigned long long lba, + u32 sectors, + int *max_sectors_set) +{ + return (TRANSPORT(dev)->get_device_type(dev) == TYPE_DISK) ? + transport_set_tasks_sectors_disk(task, dev, lba, sectors, + max_sectors_set) : + transport_set_tasks_sectors_non_disk(task, dev, lba, sectors, + max_sectors_set); +} + +static int transport_map_sg_to_mem( + struct se_cmd *cmd, + struct list_head *se_mem_list, + void *in_mem, + u32 *se_mem_cnt) +{ + struct se_mem *se_mem; + struct scatterlist *sg; + u32 sg_count = 1, cmd_size = cmd->data_length; + + if (!in_mem) { + printk(KERN_ERR "No source scatterlist\n"); + return -1; + } + sg = (struct scatterlist *)in_mem; + + while (cmd_size) { + se_mem = kmem_cache_zalloc(se_mem_cache, GFP_KERNEL); + if (!(se_mem)) { + printk(KERN_ERR "Unable to allocate struct se_mem\n"); + return -1; + } + INIT_LIST_HEAD(&se_mem->se_list); + DEBUG_MEM("sg_to_mem: Starting loop with cmd_size: %u" + " sg_page: %p offset: %d length: %d\n", cmd_size, + sg_page(sg), sg->offset, sg->length); + + se_mem->se_page = sg_page(sg); + se_mem->se_off = sg->offset; + + if (cmd_size > sg->length) { + se_mem->se_len = sg->length; + sg = sg_next(sg); + sg_count++; + } else + se_mem->se_len = cmd_size; + + cmd_size -= se_mem->se_len; + + DEBUG_MEM("sg_to_mem: *se_mem_cnt: %u cmd_size: %u\n", + *se_mem_cnt, cmd_size); + DEBUG_MEM("sg_to_mem: Final se_page: %p se_off: %d se_len: %d\n", + se_mem->se_page, se_mem->se_off, se_mem->se_len); + + list_add_tail(&se_mem->se_list, se_mem_list); + (*se_mem_cnt)++; + } + + DEBUG_MEM("task[0] - Mapped(%u) struct scatterlist segments to(%u)" + " struct se_mem\n", sg_count, *se_mem_cnt); + + if (sg_count != *se_mem_cnt) + BUG(); + + return 0; +} + +/* transport_map_mem_to_sg(): + * + * + */ +int transport_map_mem_to_sg( + struct se_task *task, + struct list_head *se_mem_list, + void *in_mem, + struct se_mem *in_se_mem, + struct se_mem **out_se_mem, + u32 *se_mem_cnt, + u32 *task_offset) +{ + struct se_cmd *se_cmd = task->task_se_cmd; + struct se_mem *se_mem = in_se_mem; + struct scatterlist *sg = (struct scatterlist *)in_mem; + u32 task_size = task->task_size, sg_no = 0; + + if (!sg) { + printk(KERN_ERR "Unable to locate valid struct" + " scatterlist pointer\n"); + return -1; + } + + while (task_size != 0) { + /* + * Setup the contigious array of scatterlists for + * this struct se_task. + */ + sg_assign_page(sg, se_mem->se_page); + + if (*task_offset == 0) { + sg->offset = se_mem->se_off; + + if (task_size >= se_mem->se_len) { + sg->length = se_mem->se_len; + + if (!(list_is_last(&se_mem->se_list, + T_TASK(se_cmd)->t_mem_list))) { + se_mem = list_entry(se_mem->se_list.next, + struct se_mem, se_list); + (*se_mem_cnt)++; + } + } else { + sg->length = task_size; + /* + * Determine if we need to calculate an offset + * into the struct se_mem on the next go around.. + */ + task_size -= sg->length; + if (!(task_size)) + *task_offset = sg->length; + + goto next; + } + + } else { + sg->offset = (*task_offset + se_mem->se_off); + + if ((se_mem->se_len - *task_offset) > task_size) { + sg->length = task_size; + /* + * Determine if we need to calculate an offset + * into the struct se_mem on the next go around.. + */ + task_size -= sg->length; + if (!(task_size)) + *task_offset += sg->length; + + goto next; + } else { + sg->length = (se_mem->se_len - *task_offset); + + if (!(list_is_last(&se_mem->se_list, + T_TASK(se_cmd)->t_mem_list))) { + se_mem = list_entry(se_mem->se_list.next, + struct se_mem, se_list); + (*se_mem_cnt)++; + } + } + + *task_offset = 0; + } + task_size -= sg->length; +next: + DEBUG_MEM("task[%u] mem_to_sg - sg[%u](%p)(%u)(%u) - Reducing" + " task_size to(%u), task_offset: %u\n", task->task_no, sg_no, + sg_page(sg), sg->length, sg->offset, task_size, *task_offset); + + sg_no++; + if (!(task_size)) + break; + + sg = sg_next(sg); + + if (task_size > se_cmd->data_length) + BUG(); + } + *out_se_mem = se_mem; + + DEBUG_MEM("task[%u] - Mapped(%u) struct se_mem segments to total(%u)" + " SGs\n", task->task_no, *se_mem_cnt, sg_no); + + return 0; +} + +/* + * This function can be used by HW target mode drivers to create a linked + * scatterlist from all contiguously allocated struct se_task->task_sg[]. + * This is intended to be called during the completion path by TCM Core + * when struct target_core_fabric_ops->check_task_sg_chaining is enabled. + */ +void transport_do_task_sg_chain(struct se_cmd *cmd) +{ + struct scatterlist *sg_head = NULL, *sg_link = NULL, *sg_first = NULL; + struct scatterlist *sg_head_cur = NULL, *sg_link_cur = NULL; + struct scatterlist *sg, *sg_end = NULL, *sg_end_cur = NULL; + struct se_task *task; + struct target_core_fabric_ops *tfo = CMD_TFO(cmd); + u32 task_sg_num = 0, sg_count = 0; + int i; + + if (tfo->task_sg_chaining == 0) { + printk(KERN_ERR "task_sg_chaining is diabled for fabric module:" + " %s\n", tfo->get_fabric_name()); + dump_stack(); + return; + } + /* + * Walk the struct se_task list and setup scatterlist chains + * for each contiguosly allocated struct se_task->task_sg[]. + */ + list_for_each_entry(task, &T_TASK(cmd)->t_task_list, t_list) { + if (!(task->task_sg) || !(task->task_padded_sg)) + continue; + + if (sg_head && sg_link) { + sg_head_cur = &task->task_sg[0]; + sg_link_cur = &task->task_sg[task->task_sg_num]; + /* + * Either add chain or mark end of scatterlist + */ + if (!(list_is_last(&task->t_list, + &T_TASK(cmd)->t_task_list))) { + /* + * Clear existing SGL termination bit set in + * transport_calc_sg_num(), see sg_mark_end() + */ + sg_end_cur = &task->task_sg[task->task_sg_num - 1]; + sg_end_cur->page_link &= ~0x02; + + sg_chain(sg_head, task_sg_num, sg_head_cur); + sg_count += (task->task_sg_num + 1); + } else + sg_count += task->task_sg_num; + + sg_head = sg_head_cur; + sg_link = sg_link_cur; + task_sg_num = task->task_sg_num; + continue; + } + sg_head = sg_first = &task->task_sg[0]; + sg_link = &task->task_sg[task->task_sg_num]; + task_sg_num = task->task_sg_num; + /* + * Check for single task.. + */ + if (!(list_is_last(&task->t_list, &T_TASK(cmd)->t_task_list))) { + /* + * Clear existing SGL termination bit set in + * transport_calc_sg_num(), see sg_mark_end() + */ + sg_end = &task->task_sg[task->task_sg_num - 1]; + sg_end->page_link &= ~0x02; + sg_count += (task->task_sg_num + 1); + } else + sg_count += task->task_sg_num; + } + /* + * Setup the starting pointer and total t_tasks_sg_linked_no including + * padding SGs for linking and to mark the end. + */ + T_TASK(cmd)->t_tasks_sg_chained = sg_first; + T_TASK(cmd)->t_tasks_sg_chained_no = sg_count; + + DEBUG_CMD_M("Setup T_TASK(cmd)->t_tasks_sg_chained: %p and" + " t_tasks_sg_chained_no: %u\n", T_TASK(cmd)->t_tasks_sg_chained, + T_TASK(cmd)->t_tasks_sg_chained_no); + + for_each_sg(T_TASK(cmd)->t_tasks_sg_chained, sg, + T_TASK(cmd)->t_tasks_sg_chained_no, i) { + + DEBUG_CMD_M("SG: %p page: %p length: %d offset: %d\n", + sg, sg_page(sg), sg->length, sg->offset); + if (sg_is_chain(sg)) + DEBUG_CMD_M("SG: %p sg_is_chain=1\n", sg); + if (sg_is_last(sg)) + DEBUG_CMD_M("SG: %p sg_is_last=1\n", sg); + } + +} +EXPORT_SYMBOL(transport_do_task_sg_chain); + +static int transport_do_se_mem_map( + struct se_device *dev, + struct se_task *task, + struct list_head *se_mem_list, + void *in_mem, + struct se_mem *in_se_mem, + struct se_mem **out_se_mem, + u32 *se_mem_cnt, + u32 *task_offset_in) +{ + u32 task_offset = *task_offset_in; + int ret = 0; + /* + * se_subsystem_api_t->do_se_mem_map is used when internal allocation + * has been done by the transport plugin. + */ + if (TRANSPORT(dev)->do_se_mem_map) { + ret = TRANSPORT(dev)->do_se_mem_map(task, se_mem_list, + in_mem, in_se_mem, out_se_mem, se_mem_cnt, + task_offset_in); + if (ret == 0) + T_TASK(task->task_se_cmd)->t_tasks_se_num += *se_mem_cnt; + + return ret; + } + /* + * This is the normal path for all normal non BIDI and BIDI-COMMAND + * WRITE payloads.. If we need to do BIDI READ passthrough for + * TCM/pSCSI the first call to transport_do_se_mem_map -> + * transport_calc_sg_num() -> transport_map_mem_to_sg() will do the + * allocation for task->task_sg_bidi, and the subsequent call to + * transport_do_se_mem_map() from transport_generic_get_cdb_count() + */ + if (!(task->task_sg_bidi)) { + /* + * Assume default that transport plugin speaks preallocated + * scatterlists. + */ + if (!(transport_calc_sg_num(task, in_se_mem, task_offset))) + return -1; + /* + * struct se_task->task_sg now contains the struct scatterlist array. + */ + return transport_map_mem_to_sg(task, se_mem_list, task->task_sg, + in_se_mem, out_se_mem, se_mem_cnt, + task_offset_in); + } + /* + * Handle the se_mem_list -> struct task->task_sg_bidi + * memory map for the extra BIDI READ payload + */ + return transport_map_mem_to_sg(task, se_mem_list, task->task_sg_bidi, + in_se_mem, out_se_mem, se_mem_cnt, + task_offset_in); +} + +static u32 transport_generic_get_cdb_count( + struct se_cmd *cmd, + unsigned long long lba, + u32 sectors, + enum dma_data_direction data_direction, + struct list_head *mem_list, + int set_counts) +{ + unsigned char *cdb = NULL; + struct se_task *task; + struct se_mem *se_mem = NULL, *se_mem_lout = NULL; + struct se_mem *se_mem_bidi = NULL, *se_mem_bidi_lout = NULL; + struct se_device *dev = SE_DEV(cmd); + int max_sectors_set = 0, ret; + u32 task_offset_in = 0, se_mem_cnt = 0, se_mem_bidi_cnt = 0, task_cdbs = 0; + + if (!mem_list) { + printk(KERN_ERR "mem_list is NULL in transport_generic_get" + "_cdb_count()\n"); + return 0; + } + /* + * While using RAMDISK_DR backstores is the only case where + * mem_list will ever be empty at this point. + */ + if (!(list_empty(mem_list))) + se_mem = list_entry(mem_list->next, struct se_mem, se_list); + /* + * Check for extra se_mem_bidi mapping for BIDI-COMMANDs to + * struct se_task->task_sg_bidi for TCM/pSCSI passthrough operation + */ + if ((T_TASK(cmd)->t_mem_bidi_list != NULL) && + !(list_empty(T_TASK(cmd)->t_mem_bidi_list)) && + (TRANSPORT(dev)->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV)) + se_mem_bidi = list_entry(T_TASK(cmd)->t_mem_bidi_list->next, + struct se_mem, se_list); + + while (sectors) { + DEBUG_VOL("ITT[0x%08x] LBA(%llu) SectorsLeft(%u) EOBJ(%llu)\n", + CMD_TFO(cmd)->get_task_tag(cmd), lba, sectors, + transport_dev_end_lba(dev)); + + task = transport_generic_get_task(cmd, data_direction); + if (!(task)) + goto out; + + transport_set_tasks_sectors(task, dev, lba, sectors, + &max_sectors_set); + + task->task_lba = lba; + lba += task->task_sectors; + sectors -= task->task_sectors; + task->task_size = (task->task_sectors * + DEV_ATTRIB(dev)->block_size); + + cdb = TRANSPORT(dev)->get_cdb(task); + if ((cdb)) { + memcpy(cdb, T_TASK(cmd)->t_task_cdb, + scsi_command_size(T_TASK(cmd)->t_task_cdb)); + cmd->transport_split_cdb(task->task_lba, + &task->task_sectors, cdb); + } + + /* + * Perform the SE OBJ plugin and/or Transport plugin specific + * mapping for T_TASK(cmd)->t_mem_list. And setup the + * task->task_sg and if necessary task->task_sg_bidi + */ + ret = transport_do_se_mem_map(dev, task, mem_list, + NULL, se_mem, &se_mem_lout, &se_mem_cnt, + &task_offset_in); + if (ret < 0) + goto out; + + se_mem = se_mem_lout; + /* + * Setup the T_TASK(cmd)->t_mem_bidi_list -> task->task_sg_bidi + * mapping for SCSI READ for BIDI-COMMAND passthrough with TCM/pSCSI + * + * Note that the first call to transport_do_se_mem_map() above will + * allocate struct se_task->task_sg_bidi in transport_do_se_mem_map() + * -> transport_calc_sg_num(), and the second here will do the + * mapping for SCSI READ for BIDI-COMMAND passthrough with TCM/pSCSI. + */ + if (task->task_sg_bidi != NULL) { + ret = transport_do_se_mem_map(dev, task, + T_TASK(cmd)->t_mem_bidi_list, NULL, + se_mem_bidi, &se_mem_bidi_lout, &se_mem_bidi_cnt, + &task_offset_in); + if (ret < 0) + goto out; + + se_mem_bidi = se_mem_bidi_lout; + } + task_cdbs++; + + DEBUG_VOL("Incremented task_cdbs(%u) task->task_sg_num(%u)\n", + task_cdbs, task->task_sg_num); + + if (max_sectors_set) { + max_sectors_set = 0; + continue; + } + + if (!sectors) + break; + } + + if (set_counts) { + atomic_inc(&T_TASK(cmd)->t_fe_count); + atomic_inc(&T_TASK(cmd)->t_se_count); + } + + DEBUG_VOL("ITT[0x%08x] total %s cdbs(%u)\n", + CMD_TFO(cmd)->get_task_tag(cmd), (data_direction == DMA_TO_DEVICE) + ? "DMA_TO_DEVICE" : "DMA_FROM_DEVICE", task_cdbs); + + return task_cdbs; +out: + return 0; +} + +static int +transport_map_control_cmd_to_task(struct se_cmd *cmd) +{ + struct se_device *dev = SE_DEV(cmd); + unsigned char *cdb; + struct se_task *task; + int ret; + + task = transport_generic_get_task(cmd, cmd->data_direction); + if (!task) + return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + + cdb = TRANSPORT(dev)->get_cdb(task); + if (cdb) + memcpy(cdb, cmd->t_task->t_task_cdb, + scsi_command_size(cmd->t_task->t_task_cdb)); + + task->task_size = cmd->data_length; + task->task_sg_num = + (cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) ? 1 : 0; + + atomic_inc(&cmd->t_task->t_fe_count); + atomic_inc(&cmd->t_task->t_se_count); + + if (cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) { + struct se_mem *se_mem = NULL, *se_mem_lout = NULL; + u32 se_mem_cnt = 0, task_offset = 0; + + BUG_ON(list_empty(cmd->t_task->t_mem_list)); + + ret = transport_do_se_mem_map(dev, task, + cmd->t_task->t_mem_list, NULL, se_mem, + &se_mem_lout, &se_mem_cnt, &task_offset); + if (ret < 0) + return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + + if (dev->transport->map_task_SG) + return dev->transport->map_task_SG(task); + return 0; + } else if (cmd->se_cmd_flags & SCF_SCSI_CONTROL_NONSG_IO_CDB) { + if (dev->transport->map_task_non_SG) + return dev->transport->map_task_non_SG(task); + return 0; + } else if (cmd->se_cmd_flags & SCF_SCSI_NON_DATA_CDB) { + if (dev->transport->cdb_none) + return dev->transport->cdb_none(task); + return 0; + } else { + BUG(); + return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + } +} + +/* transport_generic_new_cmd(): Called from transport_processing_thread() + * + * Allocate storage transport resources from a set of values predefined + * by transport_generic_cmd_sequencer() from the iSCSI Target RX process. + * Any non zero return here is treated as an "out of resource' op here. + */ + /* + * Generate struct se_task(s) and/or their payloads for this CDB. + */ +static int transport_generic_new_cmd(struct se_cmd *cmd) +{ + struct se_portal_group *se_tpg; + struct se_task *task; + struct se_device *dev = SE_DEV(cmd); + int ret = 0; + + /* + * Determine is the TCM fabric module has already allocated physical + * memory, and is directly calling transport_generic_map_mem_to_cmd() + * to setup beforehand the linked list of physical memory at + * T_TASK(cmd)->t_mem_list of struct se_mem->se_page + */ + if (!(cmd->se_cmd_flags & SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC)) { + ret = transport_allocate_resources(cmd); + if (ret < 0) + return ret; + } + + ret = transport_get_sectors(cmd); + if (ret < 0) + return ret; + + ret = transport_new_cmd_obj(cmd); + if (ret < 0) + return ret; + + /* + * Determine if the calling TCM fabric module is talking to + * Linux/NET via kernel sockets and needs to allocate a + * struct iovec array to complete the struct se_cmd + */ + se_tpg = SE_LUN(cmd)->lun_sep->sep_tpg; + if (TPG_TFO(se_tpg)->alloc_cmd_iovecs != NULL) { + ret = TPG_TFO(se_tpg)->alloc_cmd_iovecs(cmd); + if (ret < 0) + return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + } + + if (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) { + list_for_each_entry(task, &T_TASK(cmd)->t_task_list, t_list) { + if (atomic_read(&task->task_sent)) + continue; + if (!dev->transport->map_task_SG) + continue; + + ret = dev->transport->map_task_SG(task); + if (ret < 0) + return ret; + } + } else { + ret = transport_map_control_cmd_to_task(cmd); + if (ret < 0) + return ret; + } + + /* + * For WRITEs, let the iSCSI Target RX Thread know its buffer is ready.. + * This WRITE struct se_cmd (and all of its associated struct se_task's) + * will be added to the struct se_device execution queue after its WRITE + * data has arrived. (ie: It gets handled by the transport processing + * thread a second time) + */ + if (cmd->data_direction == DMA_TO_DEVICE) { + transport_add_tasks_to_state_queue(cmd); + return transport_generic_write_pending(cmd); + } + /* + * Everything else but a WRITE, add the struct se_cmd's struct se_task's + * to the execution queue. + */ + transport_execute_tasks(cmd); + return 0; +} + +/* transport_generic_process_write(): + * + * + */ +void transport_generic_process_write(struct se_cmd *cmd) +{ +#if 0 + /* + * Copy SCSI Presented DTL sector(s) from received buffers allocated to + * original EDTL + */ + if (cmd->se_cmd_flags & SCF_UNDERFLOW_BIT) { + if (!T_TASK(cmd)->t_tasks_se_num) { + unsigned char *dst, *buf = + (unsigned char *)T_TASK(cmd)->t_task_buf; + + dst = kzalloc(cmd->cmd_spdtl), GFP_KERNEL); + if (!(dst)) { + printk(KERN_ERR "Unable to allocate memory for" + " WRITE underflow\n"); + transport_generic_request_failure(cmd, NULL, + PYX_TRANSPORT_REQ_TOO_MANY_SECTORS, 1); + return; + } + memcpy(dst, buf, cmd->cmd_spdtl); + + kfree(T_TASK(cmd)->t_task_buf); + T_TASK(cmd)->t_task_buf = dst; + } else { + struct scatterlist *sg = + (struct scatterlist *sg)T_TASK(cmd)->t_task_buf; + struct scatterlist *orig_sg; + + orig_sg = kzalloc(sizeof(struct scatterlist) * + T_TASK(cmd)->t_tasks_se_num, + GFP_KERNEL))) { + if (!(orig_sg)) { + printk(KERN_ERR "Unable to allocate memory" + " for WRITE underflow\n"); + transport_generic_request_failure(cmd, NULL, + PYX_TRANSPORT_REQ_TOO_MANY_SECTORS, 1); + return; + } + + memcpy(orig_sg, T_TASK(cmd)->t_task_buf, + sizeof(struct scatterlist) * + T_TASK(cmd)->t_tasks_se_num); + + cmd->data_length = cmd->cmd_spdtl; + /* + * FIXME, clear out original struct se_task and state + * information. + */ + if (transport_generic_new_cmd(cmd) < 0) { + transport_generic_request_failure(cmd, NULL, + PYX_TRANSPORT_REQ_TOO_MANY_SECTORS, 1); + kfree(orig_sg); + return; + } + + transport_memcpy_write_sg(cmd, orig_sg); + } + } +#endif + transport_execute_tasks(cmd); +} +EXPORT_SYMBOL(transport_generic_process_write); + +/* transport_generic_write_pending(): + * + * + */ +static int transport_generic_write_pending(struct se_cmd *cmd) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + cmd->t_state = TRANSPORT_WRITE_PENDING; + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + /* + * For the TCM control CDBs using a contiguous buffer, do the memcpy + * from the passed Linux/SCSI struct scatterlist located at + * T_TASK(se_cmd)->t_task_pt_buf to the contiguous buffer at + * T_TASK(se_cmd)->t_task_buf. + */ + if (cmd->se_cmd_flags & SCF_PASSTHROUGH_CONTIG_TO_SG) + transport_memcpy_read_contig(cmd, + T_TASK(cmd)->t_task_buf, + T_TASK(cmd)->t_task_pt_sgl); + /* + * Clear the se_cmd for WRITE_PENDING status in order to set + * T_TASK(cmd)->t_transport_active=0 so that transport_generic_handle_data + * can be called from HW target mode interrupt code. This is safe + * to be called with transport_off=1 before the CMD_TFO(cmd)->write_pending + * because the se_cmd->se_lun pointer is not being cleared. + */ + transport_cmd_check_stop(cmd, 1, 0); + + /* + * Call the fabric write_pending function here to let the + * frontend know that WRITE buffers are ready. + */ + ret = CMD_TFO(cmd)->write_pending(cmd); + if (ret < 0) + return ret; + + return PYX_TRANSPORT_WRITE_PENDING; +} + +/* transport_release_cmd_to_pool(): + * + * + */ +void transport_release_cmd_to_pool(struct se_cmd *cmd) +{ + BUG_ON(!T_TASK(cmd)); + BUG_ON(!CMD_TFO(cmd)); + + transport_free_se_cmd(cmd); + CMD_TFO(cmd)->release_cmd_to_pool(cmd); +} +EXPORT_SYMBOL(transport_release_cmd_to_pool); + +/* transport_generic_free_cmd(): + * + * Called from processing frontend to release storage engine resources + */ +void transport_generic_free_cmd( + struct se_cmd *cmd, + int wait_for_tasks, + int release_to_pool, + int session_reinstatement) +{ + if (!(cmd->se_cmd_flags & SCF_SE_LUN_CMD) || !T_TASK(cmd)) + transport_release_cmd_to_pool(cmd); + else { + core_dec_lacl_count(cmd->se_sess->se_node_acl, cmd); + + if (SE_LUN(cmd)) { +#if 0 + printk(KERN_INFO "cmd: %p ITT: 0x%08x contains" + " SE_LUN(cmd)\n", cmd, + CMD_TFO(cmd)->get_task_tag(cmd)); +#endif + transport_lun_remove_cmd(cmd); + } + + if (wait_for_tasks && cmd->transport_wait_for_tasks) + cmd->transport_wait_for_tasks(cmd, 0, 0); + + transport_generic_remove(cmd, release_to_pool, + session_reinstatement); + } +} +EXPORT_SYMBOL(transport_generic_free_cmd); + +static void transport_nop_wait_for_tasks( + struct se_cmd *cmd, + int remove_cmd, + int session_reinstatement) +{ + return; +} + +/* transport_lun_wait_for_tasks(): + * + * Called from ConfigFS context to stop the passed struct se_cmd to allow + * an struct se_lun to be successfully shutdown. + */ +static int transport_lun_wait_for_tasks(struct se_cmd *cmd, struct se_lun *lun) +{ + unsigned long flags; + int ret; + /* + * If the frontend has already requested this struct se_cmd to + * be stopped, we can safely ignore this struct se_cmd. + */ + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + if (atomic_read(&T_TASK(cmd)->t_transport_stop)) { + atomic_set(&T_TASK(cmd)->transport_lun_stop, 0); + DEBUG_TRANSPORT_S("ConfigFS ITT[0x%08x] - t_transport_stop ==" + " TRUE, skipping\n", CMD_TFO(cmd)->get_task_tag(cmd)); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + transport_cmd_check_stop(cmd, 1, 0); + return -1; + } + atomic_set(&T_TASK(cmd)->transport_lun_fe_stop, 1); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + wake_up_interruptible(&SE_DEV(cmd)->dev_queue_obj->thread_wq); + + ret = transport_stop_tasks_for_cmd(cmd); + + DEBUG_TRANSPORT_S("ConfigFS: cmd: %p t_task_cdbs: %d stop tasks ret:" + " %d\n", cmd, T_TASK(cmd)->t_task_cdbs, ret); + if (!ret) { + DEBUG_TRANSPORT_S("ConfigFS: ITT[0x%08x] - stopping cmd....\n", + CMD_TFO(cmd)->get_task_tag(cmd)); + wait_for_completion(&T_TASK(cmd)->transport_lun_stop_comp); + DEBUG_TRANSPORT_S("ConfigFS: ITT[0x%08x] - stopped cmd....\n", + CMD_TFO(cmd)->get_task_tag(cmd)); + } + transport_remove_cmd_from_queue(cmd, SE_DEV(cmd)->dev_queue_obj); + + return 0; +} + +/* #define DEBUG_CLEAR_LUN */ +#ifdef DEBUG_CLEAR_LUN +#define DEBUG_CLEAR_L(x...) printk(KERN_INFO x) +#else +#define DEBUG_CLEAR_L(x...) +#endif + +static void __transport_clear_lun_from_sessions(struct se_lun *lun) +{ + struct se_cmd *cmd = NULL; + unsigned long lun_flags, cmd_flags; + /* + * Do exception processing and return CHECK_CONDITION status to the + * Initiator Port. + */ + spin_lock_irqsave(&lun->lun_cmd_lock, lun_flags); + while (!list_empty_careful(&lun->lun_cmd_list)) { + cmd = list_entry(lun->lun_cmd_list.next, + struct se_cmd, se_lun_list); + list_del(&cmd->se_lun_list); + + if (!(T_TASK(cmd))) { + printk(KERN_ERR "ITT: 0x%08x, T_TASK(cmd) = NULL" + "[i,t]_state: %u/%u\n", + CMD_TFO(cmd)->get_task_tag(cmd), + CMD_TFO(cmd)->get_cmd_state(cmd), cmd->t_state); + BUG(); + } + atomic_set(&T_TASK(cmd)->transport_lun_active, 0); + /* + * This will notify iscsi_target_transport.c: + * transport_cmd_check_stop() that a LUN shutdown is in + * progress for the iscsi_cmd_t. + */ + spin_lock(&T_TASK(cmd)->t_state_lock); + DEBUG_CLEAR_L("SE_LUN[%d] - Setting T_TASK(cmd)->transport" + "_lun_stop for ITT: 0x%08x\n", + SE_LUN(cmd)->unpacked_lun, + CMD_TFO(cmd)->get_task_tag(cmd)); + atomic_set(&T_TASK(cmd)->transport_lun_stop, 1); + spin_unlock(&T_TASK(cmd)->t_state_lock); + + spin_unlock_irqrestore(&lun->lun_cmd_lock, lun_flags); + + if (!(SE_LUN(cmd))) { + printk(KERN_ERR "ITT: 0x%08x, [i,t]_state: %u/%u\n", + CMD_TFO(cmd)->get_task_tag(cmd), + CMD_TFO(cmd)->get_cmd_state(cmd), cmd->t_state); + BUG(); + } + /* + * If the Storage engine still owns the iscsi_cmd_t, determine + * and/or stop its context. + */ + DEBUG_CLEAR_L("SE_LUN[%d] - ITT: 0x%08x before transport" + "_lun_wait_for_tasks()\n", SE_LUN(cmd)->unpacked_lun, + CMD_TFO(cmd)->get_task_tag(cmd)); + + if (transport_lun_wait_for_tasks(cmd, SE_LUN(cmd)) < 0) { + spin_lock_irqsave(&lun->lun_cmd_lock, lun_flags); + continue; + } + + DEBUG_CLEAR_L("SE_LUN[%d] - ITT: 0x%08x after transport_lun" + "_wait_for_tasks(): SUCCESS\n", + SE_LUN(cmd)->unpacked_lun, + CMD_TFO(cmd)->get_task_tag(cmd)); + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, cmd_flags); + if (!(atomic_read(&T_TASK(cmd)->transport_dev_active))) { + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, cmd_flags); + goto check_cond; + } + atomic_set(&T_TASK(cmd)->transport_dev_active, 0); + transport_all_task_dev_remove_state(cmd); + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, cmd_flags); + + transport_free_dev_tasks(cmd); + /* + * The Storage engine stopped this struct se_cmd before it was + * send to the fabric frontend for delivery back to the + * Initiator Node. Return this SCSI CDB back with an + * CHECK_CONDITION status. + */ +check_cond: + transport_send_check_condition_and_sense(cmd, + TCM_NON_EXISTENT_LUN, 0); + /* + * If the fabric frontend is waiting for this iscsi_cmd_t to + * be released, notify the waiting thread now that LU has + * finished accessing it. + */ + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, cmd_flags); + if (atomic_read(&T_TASK(cmd)->transport_lun_fe_stop)) { + DEBUG_CLEAR_L("SE_LUN[%d] - Detected FE stop for" + " struct se_cmd: %p ITT: 0x%08x\n", + lun->unpacked_lun, + cmd, CMD_TFO(cmd)->get_task_tag(cmd)); + + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, + cmd_flags); + transport_cmd_check_stop(cmd, 1, 0); + complete(&T_TASK(cmd)->transport_lun_fe_stop_comp); + spin_lock_irqsave(&lun->lun_cmd_lock, lun_flags); + continue; + } + DEBUG_CLEAR_L("SE_LUN[%d] - ITT: 0x%08x finished processing\n", + lun->unpacked_lun, CMD_TFO(cmd)->get_task_tag(cmd)); + + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, cmd_flags); + spin_lock_irqsave(&lun->lun_cmd_lock, lun_flags); + } + spin_unlock_irqrestore(&lun->lun_cmd_lock, lun_flags); +} + +static int transport_clear_lun_thread(void *p) +{ + struct se_lun *lun = (struct se_lun *)p; + + __transport_clear_lun_from_sessions(lun); + complete(&lun->lun_shutdown_comp); + + return 0; +} + +int transport_clear_lun_from_sessions(struct se_lun *lun) +{ + struct task_struct *kt; + + kt = kthread_run(transport_clear_lun_thread, (void *)lun, + "tcm_cl_%u", lun->unpacked_lun); + if (IS_ERR(kt)) { + printk(KERN_ERR "Unable to start clear_lun thread\n"); + return -1; + } + wait_for_completion(&lun->lun_shutdown_comp); + + return 0; +} + +/* transport_generic_wait_for_tasks(): + * + * Called from frontend or passthrough context to wait for storage engine + * to pause and/or release frontend generated struct se_cmd. + */ +static void transport_generic_wait_for_tasks( + struct se_cmd *cmd, + int remove_cmd, + int session_reinstatement) +{ + unsigned long flags; + + if (!(cmd->se_cmd_flags & SCF_SE_LUN_CMD) && !(cmd->se_tmr_req)) + return; + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + /* + * If we are already stopped due to an external event (ie: LUN shutdown) + * sleep until the connection can have the passed struct se_cmd back. + * The T_TASK(cmd)->transport_lun_stopped_sem will be upped by + * transport_clear_lun_from_sessions() once the ConfigFS context caller + * has completed its operation on the struct se_cmd. + */ + if (atomic_read(&T_TASK(cmd)->transport_lun_stop)) { + + DEBUG_TRANSPORT_S("wait_for_tasks: Stopping" + " wait_for_completion(&T_TASK(cmd)transport_lun_fe" + "_stop_comp); for ITT: 0x%08x\n", + CMD_TFO(cmd)->get_task_tag(cmd)); + /* + * There is a special case for WRITES where a FE exception + + * LUN shutdown means ConfigFS context is still sleeping on + * transport_lun_stop_comp in transport_lun_wait_for_tasks(). + * We go ahead and up transport_lun_stop_comp just to be sure + * here. + */ + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + complete(&T_TASK(cmd)->transport_lun_stop_comp); + wait_for_completion(&T_TASK(cmd)->transport_lun_fe_stop_comp); + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + + transport_all_task_dev_remove_state(cmd); + /* + * At this point, the frontend who was the originator of this + * struct se_cmd, now owns the structure and can be released through + * normal means below. + */ + DEBUG_TRANSPORT_S("wait_for_tasks: Stopped" + " wait_for_completion(&T_TASK(cmd)transport_lun_fe_" + "stop_comp); for ITT: 0x%08x\n", + CMD_TFO(cmd)->get_task_tag(cmd)); + + atomic_set(&T_TASK(cmd)->transport_lun_stop, 0); + } + if (!atomic_read(&T_TASK(cmd)->t_transport_active)) + goto remove; + + atomic_set(&T_TASK(cmd)->t_transport_stop, 1); + + DEBUG_TRANSPORT_S("wait_for_tasks: Stopping %p ITT: 0x%08x" + " i_state: %d, t_state/def_t_state: %d/%d, t_transport_stop" + " = TRUE\n", cmd, CMD_TFO(cmd)->get_task_tag(cmd), + CMD_TFO(cmd)->get_cmd_state(cmd), cmd->t_state, + cmd->deferred_t_state); + + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + wake_up_interruptible(&SE_DEV(cmd)->dev_queue_obj->thread_wq); + + wait_for_completion(&T_TASK(cmd)->t_transport_stop_comp); + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + atomic_set(&T_TASK(cmd)->t_transport_active, 0); + atomic_set(&T_TASK(cmd)->t_transport_stop, 0); + + DEBUG_TRANSPORT_S("wait_for_tasks: Stopped wait_for_compltion(" + "&T_TASK(cmd)->t_transport_stop_comp) for ITT: 0x%08x\n", + CMD_TFO(cmd)->get_task_tag(cmd)); +remove: + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + if (!remove_cmd) + return; + + transport_generic_free_cmd(cmd, 0, 0, session_reinstatement); +} + +static int transport_get_sense_codes( + struct se_cmd *cmd, + u8 *asc, + u8 *ascq) +{ + *asc = cmd->scsi_asc; + *ascq = cmd->scsi_ascq; + + return 0; +} + +static int transport_set_sense_codes( + struct se_cmd *cmd, + u8 asc, + u8 ascq) +{ + cmd->scsi_asc = asc; + cmd->scsi_ascq = ascq; + + return 0; +} + +int transport_send_check_condition_and_sense( + struct se_cmd *cmd, + u8 reason, + int from_transport) +{ + unsigned char *buffer = cmd->sense_buffer; + unsigned long flags; + int offset; + u8 asc = 0, ascq = 0; + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) { + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + return 0; + } + cmd->se_cmd_flags |= SCF_SENT_CHECK_CONDITION; + spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); + + if (!reason && from_transport) + goto after_reason; + + if (!from_transport) + cmd->se_cmd_flags |= SCF_EMULATED_TASK_SENSE; + /* + * Data Segment and SenseLength of the fabric response PDU. + * + * TRANSPORT_SENSE_BUFFER is now set to SCSI_SENSE_BUFFERSIZE + * from include/scsi/scsi_cmnd.h + */ + offset = CMD_TFO(cmd)->set_fabric_sense_len(cmd, + TRANSPORT_SENSE_BUFFER); + /* + * Actual SENSE DATA, see SPC-3 7.23.2 SPC_SENSE_KEY_OFFSET uses + * SENSE KEY values from include/scsi/scsi.h + */ + switch (reason) { + case TCM_NON_EXISTENT_LUN: + case TCM_UNSUPPORTED_SCSI_OPCODE: + case TCM_SECTOR_COUNT_TOO_MANY: + /* CURRENT ERROR */ + buffer[offset] = 0x70; + /* ILLEGAL REQUEST */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST; + /* INVALID COMMAND OPERATION CODE */ + buffer[offset+SPC_ASC_KEY_OFFSET] = 0x20; + break; + case TCM_UNKNOWN_MODE_PAGE: + /* CURRENT ERROR */ + buffer[offset] = 0x70; + /* ILLEGAL REQUEST */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST; + /* INVALID FIELD IN CDB */ + buffer[offset+SPC_ASC_KEY_OFFSET] = 0x24; + break; + case TCM_CHECK_CONDITION_ABORT_CMD: + /* CURRENT ERROR */ + buffer[offset] = 0x70; + /* ABORTED COMMAND */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND; + /* BUS DEVICE RESET FUNCTION OCCURRED */ + buffer[offset+SPC_ASC_KEY_OFFSET] = 0x29; + buffer[offset+SPC_ASCQ_KEY_OFFSET] = 0x03; + break; + case TCM_INCORRECT_AMOUNT_OF_DATA: + /* CURRENT ERROR */ + buffer[offset] = 0x70; + /* ABORTED COMMAND */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND; + /* WRITE ERROR */ + buffer[offset+SPC_ASC_KEY_OFFSET] = 0x0c; + /* NOT ENOUGH UNSOLICITED DATA */ + buffer[offset+SPC_ASCQ_KEY_OFFSET] = 0x0d; + break; + case TCM_INVALID_CDB_FIELD: + /* CURRENT ERROR */ + buffer[offset] = 0x70; + /* ABORTED COMMAND */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND; + /* INVALID FIELD IN CDB */ + buffer[offset+SPC_ASC_KEY_OFFSET] = 0x24; + break; + case TCM_INVALID_PARAMETER_LIST: + /* CURRENT ERROR */ + buffer[offset] = 0x70; + /* ABORTED COMMAND */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND; + /* INVALID FIELD IN PARAMETER LIST */ + buffer[offset+SPC_ASC_KEY_OFFSET] = 0x26; + break; + case TCM_UNEXPECTED_UNSOLICITED_DATA: + /* CURRENT ERROR */ + buffer[offset] = 0x70; + /* ABORTED COMMAND */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND; + /* WRITE ERROR */ + buffer[offset+SPC_ASC_KEY_OFFSET] = 0x0c; + /* UNEXPECTED_UNSOLICITED_DATA */ + buffer[offset+SPC_ASCQ_KEY_OFFSET] = 0x0c; + break; + case TCM_SERVICE_CRC_ERROR: + /* CURRENT ERROR */ + buffer[offset] = 0x70; + /* ABORTED COMMAND */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND; + /* PROTOCOL SERVICE CRC ERROR */ + buffer[offset+SPC_ASC_KEY_OFFSET] = 0x47; + /* N/A */ + buffer[offset+SPC_ASCQ_KEY_OFFSET] = 0x05; + break; + case TCM_SNACK_REJECTED: + /* CURRENT ERROR */ + buffer[offset] = 0x70; + /* ABORTED COMMAND */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND; + /* READ ERROR */ + buffer[offset+SPC_ASC_KEY_OFFSET] = 0x11; + /* FAILED RETRANSMISSION REQUEST */ + buffer[offset+SPC_ASCQ_KEY_OFFSET] = 0x13; + break; + case TCM_WRITE_PROTECTED: + /* CURRENT ERROR */ + buffer[offset] = 0x70; + /* DATA PROTECT */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = DATA_PROTECT; + /* WRITE PROTECTED */ + buffer[offset+SPC_ASC_KEY_OFFSET] = 0x27; + break; + case TCM_CHECK_CONDITION_UNIT_ATTENTION: + /* CURRENT ERROR */ + buffer[offset] = 0x70; + /* UNIT ATTENTION */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = UNIT_ATTENTION; + core_scsi3_ua_for_check_condition(cmd, &asc, &ascq); + buffer[offset+SPC_ASC_KEY_OFFSET] = asc; + buffer[offset+SPC_ASCQ_KEY_OFFSET] = ascq; + break; + case TCM_CHECK_CONDITION_NOT_READY: + /* CURRENT ERROR */ + buffer[offset] = 0x70; + /* Not Ready */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = NOT_READY; + transport_get_sense_codes(cmd, &asc, &ascq); + buffer[offset+SPC_ASC_KEY_OFFSET] = asc; + buffer[offset+SPC_ASCQ_KEY_OFFSET] = ascq; + break; + case TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE: + default: + /* CURRENT ERROR */ + buffer[offset] = 0x70; + /* ILLEGAL REQUEST */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST; + /* LOGICAL UNIT COMMUNICATION FAILURE */ + buffer[offset+SPC_ASC_KEY_OFFSET] = 0x80; + break; + } + /* + * This code uses linux/include/scsi/scsi.h SAM status codes! + */ + cmd->scsi_status = SAM_STAT_CHECK_CONDITION; + /* + * Automatically padded, this value is encoded in the fabric's + * data_length response PDU containing the SCSI defined sense data. + */ + cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER + offset; + +after_reason: + CMD_TFO(cmd)->queue_status(cmd); + return 0; +} +EXPORT_SYMBOL(transport_send_check_condition_and_sense); + +int transport_check_aborted_status(struct se_cmd *cmd, int send_status) +{ + int ret = 0; + + if (atomic_read(&T_TASK(cmd)->t_transport_aborted) != 0) { + if (!(send_status) || + (cmd->se_cmd_flags & SCF_SENT_DELAYED_TAS)) + return 1; +#if 0 + printk(KERN_INFO "Sending delayed SAM_STAT_TASK_ABORTED" + " status for CDB: 0x%02x ITT: 0x%08x\n", + T_TASK(cmd)->t_task_cdb[0], + CMD_TFO(cmd)->get_task_tag(cmd)); +#endif + cmd->se_cmd_flags |= SCF_SENT_DELAYED_TAS; + CMD_TFO(cmd)->queue_status(cmd); + ret = 1; + } + return ret; +} +EXPORT_SYMBOL(transport_check_aborted_status); + +void transport_send_task_abort(struct se_cmd *cmd) +{ + /* + * If there are still expected incoming fabric WRITEs, we wait + * until until they have completed before sending a TASK_ABORTED + * response. This response with TASK_ABORTED status will be + * queued back to fabric module by transport_check_aborted_status(). + */ + if (cmd->data_direction == DMA_TO_DEVICE) { + if (CMD_TFO(cmd)->write_pending_status(cmd) != 0) { + atomic_inc(&T_TASK(cmd)->t_transport_aborted); + smp_mb__after_atomic_inc(); + cmd->scsi_status = SAM_STAT_TASK_ABORTED; + transport_new_cmd_failure(cmd); + return; + } + } + cmd->scsi_status = SAM_STAT_TASK_ABORTED; +#if 0 + printk(KERN_INFO "Setting SAM_STAT_TASK_ABORTED status for CDB: 0x%02x," + " ITT: 0x%08x\n", T_TASK(cmd)->t_task_cdb[0], + CMD_TFO(cmd)->get_task_tag(cmd)); +#endif + CMD_TFO(cmd)->queue_status(cmd); +} + +/* transport_generic_do_tmr(): + * + * + */ +int transport_generic_do_tmr(struct se_cmd *cmd) +{ + struct se_cmd *ref_cmd; + struct se_device *dev = SE_DEV(cmd); + struct se_tmr_req *tmr = cmd->se_tmr_req; + int ret; + + switch (tmr->function) { + case ABORT_TASK: + ref_cmd = tmr->ref_cmd; + tmr->response = TMR_FUNCTION_REJECTED; + break; + case ABORT_TASK_SET: + case CLEAR_ACA: + case CLEAR_TASK_SET: + tmr->response = TMR_TASK_MGMT_FUNCTION_NOT_SUPPORTED; + break; + case LUN_RESET: + ret = core_tmr_lun_reset(dev, tmr, NULL, NULL); + tmr->response = (!ret) ? TMR_FUNCTION_COMPLETE : + TMR_FUNCTION_REJECTED; + break; +#if 0 + case TARGET_WARM_RESET: + transport_generic_host_reset(dev->se_hba); + tmr->response = TMR_FUNCTION_REJECTED; + break; + case TARGET_COLD_RESET: + transport_generic_host_reset(dev->se_hba); + transport_generic_cold_reset(dev->se_hba); + tmr->response = TMR_FUNCTION_REJECTED; + break; +#endif + default: + printk(KERN_ERR "Uknown TMR function: 0x%02x.\n", + tmr->function); + tmr->response = TMR_FUNCTION_REJECTED; + break; + } + + cmd->t_state = TRANSPORT_ISTATE_PROCESSING; + CMD_TFO(cmd)->queue_tm_rsp(cmd); + + transport_cmd_check_stop(cmd, 2, 0); + return 0; +} + +/* + * Called with spin_lock_irq(&dev->execute_task_lock); held + * + */ +static struct se_task * +transport_get_task_from_state_list(struct se_device *dev) +{ + struct se_task *task; + + if (list_empty(&dev->state_task_list)) + return NULL; + + list_for_each_entry(task, &dev->state_task_list, t_state_list) + break; + + list_del(&task->t_state_list); + atomic_set(&task->task_state_active, 0); + + return task; +} + +static void transport_processing_shutdown(struct se_device *dev) +{ + struct se_cmd *cmd; + struct se_queue_req *qr; + struct se_task *task; + u8 state; + unsigned long flags; + /* + * Empty the struct se_device's struct se_task state list. + */ + spin_lock_irqsave(&dev->execute_task_lock, flags); + while ((task = transport_get_task_from_state_list(dev))) { + if (!(TASK_CMD(task))) { + printk(KERN_ERR "TASK_CMD(task) is NULL!\n"); + continue; + } + cmd = TASK_CMD(task); + + if (!T_TASK(cmd)) { + printk(KERN_ERR "T_TASK(cmd) is NULL for task: %p cmd:" + " %p ITT: 0x%08x\n", task, cmd, + CMD_TFO(cmd)->get_task_tag(cmd)); + continue; + } + spin_unlock_irqrestore(&dev->execute_task_lock, flags); + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + + DEBUG_DO("PT: cmd: %p task: %p ITT/CmdSN: 0x%08x/0x%08x," + " i_state/def_i_state: %d/%d, t_state/def_t_state:" + " %d/%d cdb: 0x%02x\n", cmd, task, + CMD_TFO(cmd)->get_task_tag(cmd), cmd->cmd_sn, + CMD_TFO(cmd)->get_cmd_state(cmd), cmd->deferred_i_state, + cmd->t_state, cmd->deferred_t_state, + T_TASK(cmd)->t_task_cdb[0]); + DEBUG_DO("PT: ITT[0x%08x] - t_task_cdbs: %d t_task_cdbs_left:" + " %d t_task_cdbs_sent: %d -- t_transport_active: %d" + " t_transport_stop: %d t_transport_sent: %d\n", + CMD_TFO(cmd)->get_task_tag(cmd), + T_TASK(cmd)->t_task_cdbs, + atomic_read(&T_TASK(cmd)->t_task_cdbs_left), + atomic_read(&T_TASK(cmd)->t_task_cdbs_sent), + atomic_read(&T_TASK(cmd)->t_transport_active), + atomic_read(&T_TASK(cmd)->t_transport_stop), + atomic_read(&T_TASK(cmd)->t_transport_sent)); + + if (atomic_read(&task->task_active)) { + atomic_set(&task->task_stop, 1); + spin_unlock_irqrestore( + &T_TASK(cmd)->t_state_lock, flags); + + DEBUG_DO("Waiting for task: %p to shutdown for dev:" + " %p\n", task, dev); + wait_for_completion(&task->task_stop_comp); + DEBUG_DO("Completed task: %p shutdown for dev: %p\n", + task, dev); + + spin_lock_irqsave(&T_TASK(cmd)->t_state_lock, flags); + atomic_dec(&T_TASK(cmd)->t_task_cdbs_left); + + atomic_set(&task->task_active, 0); + atomic_set(&task->task_stop, 0); + } + __transport_stop_task_timer(task, &flags); + + if (!(atomic_dec_and_test(&T_TASK(cmd)->t_task_cdbs_ex_left))) { + spin_unlock_irqrestore( + &T_TASK(cmd)->t_state_lock, flags); + + DEBUG_DO("Skipping task: %p, dev: %p for" + " t_task_cdbs_ex_left: %d\n", task, dev, + atomic_read(&T_TASK(cmd)->t_task_cdbs_ex_left)); + + spin_lock_irqsave(&dev->execute_task_lock, flags); + continue; + } + + if (atomic_read(&T_TASK(cmd)->t_transport_active)) { + DEBUG_DO("got t_transport_active = 1 for task: %p, dev:" + " %p\n", task, dev); + + if (atomic_read(&T_TASK(cmd)->t_fe_count)) { + spin_unlock_irqrestore( + &T_TASK(cmd)->t_state_lock, flags); + transport_send_check_condition_and_sense( + cmd, TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, + 0); + transport_remove_cmd_from_queue(cmd, + SE_DEV(cmd)->dev_queue_obj); + + transport_lun_remove_cmd(cmd); + transport_cmd_check_stop(cmd, 1, 0); + } else { + spin_unlock_irqrestore( + &T_TASK(cmd)->t_state_lock, flags); + + transport_remove_cmd_from_queue(cmd, + SE_DEV(cmd)->dev_queue_obj); + + transport_lun_remove_cmd(cmd); + + if (transport_cmd_check_stop(cmd, 1, 0)) + transport_generic_remove(cmd, 0, 0); + } + + spin_lock_irqsave(&dev->execute_task_lock, flags); + continue; + } + DEBUG_DO("Got t_transport_active = 0 for task: %p, dev: %p\n", + task, dev); + + if (atomic_read(&T_TASK(cmd)->t_fe_count)) { + spin_unlock_irqrestore( + &T_TASK(cmd)->t_state_lock, flags); + transport_send_check_condition_and_sense(cmd, + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, 0); + transport_remove_cmd_from_queue(cmd, + SE_DEV(cmd)->dev_queue_obj); + + transport_lun_remove_cmd(cmd); + transport_cmd_check_stop(cmd, 1, 0); + } else { + spin_unlock_irqrestore( + &T_TASK(cmd)->t_state_lock, flags); + + transport_remove_cmd_from_queue(cmd, + SE_DEV(cmd)->dev_queue_obj); + transport_lun_remove_cmd(cmd); + + if (transport_cmd_check_stop(cmd, 1, 0)) + transport_generic_remove(cmd, 0, 0); + } + + spin_lock_irqsave(&dev->execute_task_lock, flags); + } + spin_unlock_irqrestore(&dev->execute_task_lock, flags); + /* + * Empty the struct se_device's struct se_cmd list. + */ + spin_lock_irqsave(&dev->dev_queue_obj->cmd_queue_lock, flags); + while ((qr = __transport_get_qr_from_queue(dev->dev_queue_obj))) { + spin_unlock_irqrestore( + &dev->dev_queue_obj->cmd_queue_lock, flags); + cmd = (struct se_cmd *)qr->cmd; + state = qr->state; + kfree(qr); + + DEBUG_DO("From Device Queue: cmd: %p t_state: %d\n", + cmd, state); + + if (atomic_read(&T_TASK(cmd)->t_fe_count)) { + transport_send_check_condition_and_sense(cmd, + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, 0); + + transport_lun_remove_cmd(cmd); + transport_cmd_check_stop(cmd, 1, 0); + } else { + transport_lun_remove_cmd(cmd); + if (transport_cmd_check_stop(cmd, 1, 0)) + transport_generic_remove(cmd, 0, 0); + } + spin_lock_irqsave(&dev->dev_queue_obj->cmd_queue_lock, flags); + } + spin_unlock_irqrestore(&dev->dev_queue_obj->cmd_queue_lock, flags); +} + +/* transport_processing_thread(): + * + * + */ +static int transport_processing_thread(void *param) +{ + int ret, t_state; + struct se_cmd *cmd; + struct se_device *dev = (struct se_device *) param; + struct se_queue_req *qr; + + set_user_nice(current, -20); + + while (!kthread_should_stop()) { + ret = wait_event_interruptible(dev->dev_queue_obj->thread_wq, + atomic_read(&dev->dev_queue_obj->queue_cnt) || + kthread_should_stop()); + if (ret < 0) + goto out; + + spin_lock_irq(&dev->dev_status_lock); + if (dev->dev_status & TRANSPORT_DEVICE_SHUTDOWN) { + spin_unlock_irq(&dev->dev_status_lock); + transport_processing_shutdown(dev); + continue; + } + spin_unlock_irq(&dev->dev_status_lock); + +get_cmd: + __transport_execute_tasks(dev); + + qr = transport_get_qr_from_queue(dev->dev_queue_obj); + if (!(qr)) + continue; + + cmd = (struct se_cmd *)qr->cmd; + t_state = qr->state; + kfree(qr); + + switch (t_state) { + case TRANSPORT_NEW_CMD_MAP: + if (!(CMD_TFO(cmd)->new_cmd_map)) { + printk(KERN_ERR "CMD_TFO(cmd)->new_cmd_map is" + " NULL for TRANSPORT_NEW_CMD_MAP\n"); + BUG(); + } + ret = CMD_TFO(cmd)->new_cmd_map(cmd); + if (ret < 0) { + cmd->transport_error_status = ret; + transport_generic_request_failure(cmd, NULL, + 0, (cmd->data_direction != + DMA_TO_DEVICE)); + break; + } + /* Fall through */ + case TRANSPORT_NEW_CMD: + ret = transport_generic_new_cmd(cmd); + if (ret < 0) { + cmd->transport_error_status = ret; + transport_generic_request_failure(cmd, NULL, + 0, (cmd->data_direction != + DMA_TO_DEVICE)); + } + break; + case TRANSPORT_PROCESS_WRITE: + transport_generic_process_write(cmd); + break; + case TRANSPORT_COMPLETE_OK: + transport_stop_all_task_timers(cmd); + transport_generic_complete_ok(cmd); + break; + case TRANSPORT_REMOVE: + transport_generic_remove(cmd, 1, 0); + break; + case TRANSPORT_PROCESS_TMR: + transport_generic_do_tmr(cmd); + break; + case TRANSPORT_COMPLETE_FAILURE: + transport_generic_request_failure(cmd, NULL, 1, 1); + break; + case TRANSPORT_COMPLETE_TIMEOUT: + transport_stop_all_task_timers(cmd); + transport_generic_request_timeout(cmd); + break; + default: + printk(KERN_ERR "Unknown t_state: %d deferred_t_state:" + " %d for ITT: 0x%08x i_state: %d on SE LUN:" + " %u\n", t_state, cmd->deferred_t_state, + CMD_TFO(cmd)->get_task_tag(cmd), + CMD_TFO(cmd)->get_cmd_state(cmd), + SE_LUN(cmd)->unpacked_lun); + BUG(); + } + + goto get_cmd; + } + +out: + transport_release_all_cmds(dev); + dev->process_thread = NULL; + return 0; +} diff --git a/drivers/target/target_core_ua.c b/drivers/target/target_core_ua.c new file mode 100644 index 000000000000..a2ef346087e8 --- /dev/null +++ b/drivers/target/target_core_ua.c @@ -0,0 +1,332 @@ +/******************************************************************************* + * Filename: target_core_ua.c + * + * This file contains logic for SPC-3 Unit Attention emulation + * + * Copyright (c) 2009,2010 Rising Tide Systems + * Copyright (c) 2009,2010 Linux-iSCSI.org + * + * Nicholas A. Bellinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ******************************************************************************/ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "target_core_alua.h" +#include "target_core_hba.h" +#include "target_core_pr.h" +#include "target_core_ua.h" + +int core_scsi3_ua_check( + struct se_cmd *cmd, + unsigned char *cdb) +{ + struct se_dev_entry *deve; + struct se_session *sess = cmd->se_sess; + struct se_node_acl *nacl; + + if (!(sess)) + return 0; + + nacl = sess->se_node_acl; + if (!(nacl)) + return 0; + + deve = &nacl->device_list[cmd->orig_fe_lun]; + if (!(atomic_read(&deve->ua_count))) + return 0; + /* + * From sam4r14, section 5.14 Unit attention condition: + * + * a) if an INQUIRY command enters the enabled command state, the + * device server shall process the INQUIRY command and shall neither + * report nor clear any unit attention condition; + * b) if a REPORT LUNS command enters the enabled command state, the + * device server shall process the REPORT LUNS command and shall not + * report any unit attention condition; + * e) if a REQUEST SENSE command enters the enabled command state while + * a unit attention condition exists for the SCSI initiator port + * associated with the I_T nexus on which the REQUEST SENSE command + * was received, then the device server shall process the command + * and either: + */ + switch (cdb[0]) { + case INQUIRY: + case REPORT_LUNS: + case REQUEST_SENSE: + return 0; + default: + return -1; + } + + return -1; +} + +int core_scsi3_ua_allocate( + struct se_node_acl *nacl, + u32 unpacked_lun, + u8 asc, + u8 ascq) +{ + struct se_dev_entry *deve; + struct se_ua *ua, *ua_p, *ua_tmp; + /* + * PASSTHROUGH OPS + */ + if (!(nacl)) + return -1; + + ua = kmem_cache_zalloc(se_ua_cache, GFP_ATOMIC); + if (!(ua)) { + printk(KERN_ERR "Unable to allocate struct se_ua\n"); + return -1; + } + INIT_LIST_HEAD(&ua->ua_dev_list); + INIT_LIST_HEAD(&ua->ua_nacl_list); + + ua->ua_nacl = nacl; + ua->ua_asc = asc; + ua->ua_ascq = ascq; + + spin_lock_irq(&nacl->device_list_lock); + deve = &nacl->device_list[unpacked_lun]; + + spin_lock(&deve->ua_lock); + list_for_each_entry_safe(ua_p, ua_tmp, &deve->ua_list, ua_nacl_list) { + /* + * Do not report the same UNIT ATTENTION twice.. + */ + if ((ua_p->ua_asc == asc) && (ua_p->ua_ascq == ascq)) { + spin_unlock(&deve->ua_lock); + spin_unlock_irq(&nacl->device_list_lock); + kmem_cache_free(se_ua_cache, ua); + return 0; + } + /* + * Attach the highest priority Unit Attention to + * the head of the list following sam4r14, + * Section 5.14 Unit Attention Condition: + * + * POWER ON, RESET, OR BUS DEVICE RESET OCCURRED highest + * POWER ON OCCURRED or + * DEVICE INTERNAL RESET + * SCSI BUS RESET OCCURRED or + * MICROCODE HAS BEEN CHANGED or + * protocol specific + * BUS DEVICE RESET FUNCTION OCCURRED + * I_T NEXUS LOSS OCCURRED + * COMMANDS CLEARED BY POWER LOSS NOTIFICATION + * all others Lowest + * + * Each of the ASCQ codes listed above are defined in + * the 29h ASC family, see spc4r17 Table D.1 + */ + if (ua_p->ua_asc == 0x29) { + if ((asc == 0x29) && (ascq > ua_p->ua_ascq)) + list_add(&ua->ua_nacl_list, + &deve->ua_list); + else + list_add_tail(&ua->ua_nacl_list, + &deve->ua_list); + } else if (ua_p->ua_asc == 0x2a) { + /* + * Incoming Family 29h ASCQ codes will override + * Family 2AHh ASCQ codes for Unit Attention condition. + */ + if ((asc == 0x29) || (ascq > ua_p->ua_asc)) + list_add(&ua->ua_nacl_list, + &deve->ua_list); + else + list_add_tail(&ua->ua_nacl_list, + &deve->ua_list); + } else + list_add_tail(&ua->ua_nacl_list, + &deve->ua_list); + spin_unlock(&deve->ua_lock); + spin_unlock_irq(&nacl->device_list_lock); + + atomic_inc(&deve->ua_count); + smp_mb__after_atomic_inc(); + return 0; + } + list_add_tail(&ua->ua_nacl_list, &deve->ua_list); + spin_unlock(&deve->ua_lock); + spin_unlock_irq(&nacl->device_list_lock); + + printk(KERN_INFO "[%s]: Allocated UNIT ATTENTION, mapped LUN: %u, ASC:" + " 0x%02x, ASCQ: 0x%02x\n", + TPG_TFO(nacl->se_tpg)->get_fabric_name(), unpacked_lun, + asc, ascq); + + atomic_inc(&deve->ua_count); + smp_mb__after_atomic_inc(); + return 0; +} + +void core_scsi3_ua_release_all( + struct se_dev_entry *deve) +{ + struct se_ua *ua, *ua_p; + + spin_lock(&deve->ua_lock); + list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) { + list_del(&ua->ua_nacl_list); + kmem_cache_free(se_ua_cache, ua); + + atomic_dec(&deve->ua_count); + smp_mb__after_atomic_dec(); + } + spin_unlock(&deve->ua_lock); +} + +void core_scsi3_ua_for_check_condition( + struct se_cmd *cmd, + u8 *asc, + u8 *ascq) +{ + struct se_device *dev = SE_DEV(cmd); + struct se_dev_entry *deve; + struct se_session *sess = cmd->se_sess; + struct se_node_acl *nacl; + struct se_ua *ua = NULL, *ua_p; + int head = 1; + + if (!(sess)) + return; + + nacl = sess->se_node_acl; + if (!(nacl)) + return; + + spin_lock_irq(&nacl->device_list_lock); + deve = &nacl->device_list[cmd->orig_fe_lun]; + if (!(atomic_read(&deve->ua_count))) { + spin_unlock_irq(&nacl->device_list_lock); + return; + } + /* + * The highest priority Unit Attentions are placed at the head of the + * struct se_dev_entry->ua_list, and will be returned in CHECK_CONDITION + + * sense data for the received CDB. + */ + spin_lock(&deve->ua_lock); + list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) { + /* + * For ua_intlck_ctrl code not equal to 00b, only report the + * highest priority UNIT_ATTENTION and ASC/ASCQ without + * clearing it. + */ + if (DEV_ATTRIB(dev)->emulate_ua_intlck_ctrl != 0) { + *asc = ua->ua_asc; + *ascq = ua->ua_ascq; + break; + } + /* + * Otherwise for the default 00b, release the UNIT ATTENTION + * condition. Return the ASC/ASCQ of the higest priority UA + * (head of the list) in the outgoing CHECK_CONDITION + sense. + */ + if (head) { + *asc = ua->ua_asc; + *ascq = ua->ua_ascq; + head = 0; + } + list_del(&ua->ua_nacl_list); + kmem_cache_free(se_ua_cache, ua); + + atomic_dec(&deve->ua_count); + smp_mb__after_atomic_dec(); + } + spin_unlock(&deve->ua_lock); + spin_unlock_irq(&nacl->device_list_lock); + + printk(KERN_INFO "[%s]: %s UNIT ATTENTION condition with" + " INTLCK_CTRL: %d, mapped LUN: %u, got CDB: 0x%02x" + " reported ASC: 0x%02x, ASCQ: 0x%02x\n", + TPG_TFO(nacl->se_tpg)->get_fabric_name(), + (DEV_ATTRIB(dev)->emulate_ua_intlck_ctrl != 0) ? "Reporting" : + "Releasing", DEV_ATTRIB(dev)->emulate_ua_intlck_ctrl, + cmd->orig_fe_lun, T_TASK(cmd)->t_task_cdb[0], *asc, *ascq); +} + +int core_scsi3_ua_clear_for_request_sense( + struct se_cmd *cmd, + u8 *asc, + u8 *ascq) +{ + struct se_dev_entry *deve; + struct se_session *sess = cmd->se_sess; + struct se_node_acl *nacl; + struct se_ua *ua = NULL, *ua_p; + int head = 1; + + if (!(sess)) + return -1; + + nacl = sess->se_node_acl; + if (!(nacl)) + return -1; + + spin_lock_irq(&nacl->device_list_lock); + deve = &nacl->device_list[cmd->orig_fe_lun]; + if (!(atomic_read(&deve->ua_count))) { + spin_unlock_irq(&nacl->device_list_lock); + return -1; + } + /* + * The highest priority Unit Attentions are placed at the head of the + * struct se_dev_entry->ua_list. The First (and hence highest priority) + * ASC/ASCQ will be returned in REQUEST_SENSE payload data for the + * matching struct se_lun. + * + * Once the returning ASC/ASCQ values are set, we go ahead and + * release all of the Unit Attention conditions for the assoicated + * struct se_lun. + */ + spin_lock(&deve->ua_lock); + list_for_each_entry_safe(ua, ua_p, &deve->ua_list, ua_nacl_list) { + if (head) { + *asc = ua->ua_asc; + *ascq = ua->ua_ascq; + head = 0; + } + list_del(&ua->ua_nacl_list); + kmem_cache_free(se_ua_cache, ua); + + atomic_dec(&deve->ua_count); + smp_mb__after_atomic_dec(); + } + spin_unlock(&deve->ua_lock); + spin_unlock_irq(&nacl->device_list_lock); + + printk(KERN_INFO "[%s]: Released UNIT ATTENTION condition, mapped" + " LUN: %u, got REQUEST_SENSE reported ASC: 0x%02x," + " ASCQ: 0x%02x\n", TPG_TFO(nacl->se_tpg)->get_fabric_name(), + cmd->orig_fe_lun, *asc, *ascq); + + return (head) ? -1 : 0; +} diff --git a/drivers/target/target_core_ua.h b/drivers/target/target_core_ua.h new file mode 100644 index 000000000000..6e6b03460a1a --- /dev/null +++ b/drivers/target/target_core_ua.h @@ -0,0 +1,36 @@ +#ifndef TARGET_CORE_UA_H + +/* + * From spc4r17, Table D.1: ASC and ASCQ Assignement + */ +#define ASCQ_29H_POWER_ON_RESET_OR_BUS_DEVICE_RESET_OCCURED 0x00 +#define ASCQ_29H_POWER_ON_OCCURRED 0x01 +#define ASCQ_29H_SCSI_BUS_RESET_OCCURED 0x02 +#define ASCQ_29H_BUS_DEVICE_RESET_FUNCTION_OCCURRED 0x03 +#define ASCQ_29H_DEVICE_INTERNAL_RESET 0x04 +#define ASCQ_29H_TRANSCEIVER_MODE_CHANGED_TO_SINGLE_ENDED 0x05 +#define ASCQ_29H_TRANSCEIVER_MODE_CHANGED_TO_LVD 0x06 +#define ASCQ_29H_NEXUS_LOSS_OCCURRED 0x07 + +#define ASCQ_2AH_PARAMETERS_CHANGED 0x00 +#define ASCQ_2AH_MODE_PARAMETERS_CHANGED 0x01 +#define ASCQ_2AH_LOG_PARAMETERS_CHANGED 0x02 +#define ASCQ_2AH_RESERVATIONS_PREEMPTED 0x03 +#define ASCQ_2AH_RESERVATIONS_RELEASED 0x04 +#define ASCQ_2AH_REGISTRATIONS_PREEMPTED 0x05 +#define ASCQ_2AH_ASYMMETRIC_ACCESS_STATE_CHANGED 0x06 +#define ASCQ_2AH_IMPLICT_ASYMMETRIC_ACCESS_STATE_TRANSITION_FAILED 0x07 +#define ASCQ_2AH_PRIORITY_CHANGED 0x08 + +#define ASCQ_2CH_PREVIOUS_RESERVATION_CONFLICT_STATUS 0x09 + +extern struct kmem_cache *se_ua_cache; + +extern int core_scsi3_ua_check(struct se_cmd *, unsigned char *); +extern int core_scsi3_ua_allocate(struct se_node_acl *, u32, u8, u8); +extern void core_scsi3_ua_release_all(struct se_dev_entry *); +extern void core_scsi3_ua_for_check_condition(struct se_cmd *, u8 *, u8 *); +extern int core_scsi3_ua_clear_for_request_sense(struct se_cmd *, + u8 *, u8 *); + +#endif /* TARGET_CORE_UA_H */ -- cgit v1.2.1 From 7f5db6a8022e8d4bb92b3d638068d2c2a9c9b59b Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 14 Jan 2011 09:44:19 +0100 Subject: gpio: timbgpio: Fix up irq_data conversion breakage. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit a1f5f22adc3206c47e70652c12671666c65b579f ("gpio: timbgpio: irq_data conversion") was slightly too enthusiastic in converting timbgpio_irq() over to take an irq_data * argument instead of an unsigned int irq argument, as it is a flow handler, which still take IRQ numbers for now. (And on top of that, it was using the wrong accessors.) This fixes it up, and seems to build without warnings. Signed-off-by: Lennert Buytenhek Cc: Andrew Morton Cc: Richard Röjfors Signed-off-by: Linus Torvalds --- drivers/gpio/timbgpio.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/timbgpio.c b/drivers/gpio/timbgpio.c index 349131eb1ce0..58c8f30352dd 100644 --- a/drivers/gpio/timbgpio.c +++ b/drivers/gpio/timbgpio.c @@ -193,13 +193,13 @@ out: return ret; } -static void timbgpio_irq(struct irq_data *d, struct irq_desc *desc) +static void timbgpio_irq(unsigned int irq, struct irq_desc *desc) { - struct timbgpio *tgpio = irq_data_get_irq_data(d); + struct timbgpio *tgpio = get_irq_data(irq); unsigned long ipr; int offset; - desc->irq_data.chip->ack(irq_get_irq_data(d)); + desc->irq_data.chip->irq_ack(irq_get_irq_data(irq)); ipr = ioread32(tgpio->membase + TGPIO_IPR); iowrite32(ipr, tgpio->membase + TGPIO_ICR); -- cgit v1.2.1 From 53371edaef692bef7eee8070bd680401ccf65706 Mon Sep 17 00:00:00 2001 From: Oswald Buddenhagen Date: Sat, 19 Jun 2010 23:08:37 +0200 Subject: agp/intel: Fix device names of i845 and 845G They got mixed up when the switch was converted to a table in 2007. Signed-off-by: Oswald Buddenhagen [ickle: minor changes for 2.6.37+] Signed-off-by: Chris Wilson --- drivers/char/agp/intel-agp.c | 4 ++-- drivers/char/agp/intel-gtt.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 07e9796fead7..857df10c0428 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -717,8 +717,8 @@ static const struct intel_agp_driver_description { { PCI_DEVICE_ID_INTEL_82820_UP_HB, "i820", &intel_820_driver }, { PCI_DEVICE_ID_INTEL_82830_HB, "830M", &intel_830mp_driver }, { PCI_DEVICE_ID_INTEL_82840_HB, "i840", &intel_840_driver }, - { PCI_DEVICE_ID_INTEL_82845_HB, "845G", &intel_845_driver }, - { PCI_DEVICE_ID_INTEL_82845G_HB, "830M", &intel_845_driver }, + { PCI_DEVICE_ID_INTEL_82845_HB, "i845", &intel_845_driver }, + { PCI_DEVICE_ID_INTEL_82845G_HB, "845G", &intel_845_driver }, { PCI_DEVICE_ID_INTEL_82850_HB, "i850", &intel_850_driver }, { PCI_DEVICE_ID_INTEL_82854_HB, "854", &intel_845_driver }, { PCI_DEVICE_ID_INTEL_82855PM_HB, "855PM", &intel_845_driver }, diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index e921b693412b..826ab0939a12 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -1361,7 +1361,7 @@ static const struct intel_gtt_driver_description { &i81x_gtt_driver}, { PCI_DEVICE_ID_INTEL_82830_CGC, "830M", &i8xx_gtt_driver}, - { PCI_DEVICE_ID_INTEL_82845G_IG, "830M", + { PCI_DEVICE_ID_INTEL_82845G_IG, "845G", &i8xx_gtt_driver}, { PCI_DEVICE_ID_INTEL_82854_IG, "854", &i8xx_gtt_driver}, -- cgit v1.2.1 From 22ab70d3262ddb6e69b3c246a34e2967ba5eb1e8 Mon Sep 17 00:00:00 2001 From: Knut Petersen Date: Fri, 14 Jan 2011 15:38:10 +0000 Subject: drm/i915/lvds: Add AOpen i915GMm-HFS to the list of false-positive LVDS Signed-off-by: Knut Petersen Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/intel_lvds.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 8f4f6bd33ee9..ace8d5d30dd2 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -702,6 +702,14 @@ static const struct dmi_system_id intel_no_lvds[] = { DMI_MATCH(DMI_BOARD_NAME, "i915GMx-F"), }, }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "AOpen i915GMm-HFS", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"), + DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"), + }, + }, { .callback = intel_no_lvds_dmi_callback, .ident = "Aopen i945GTt-VFA", -- cgit v1.2.1 From 415e12b2379239973feab91850b0dce985c6058a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 7 Jan 2011 00:55:09 +0100 Subject: PCI/ACPI: Request _OSC control once for each root bridge (v3) Move the evaluation of acpi_pci_osc_control_set() (to request control of PCI Express native features) into acpi_pci_root_add() to avoid calling it many times for the same root complex with the same arguments. Additionally, check if all of the requisite _OSC support bits are set before calling acpi_pci_osc_control_set() for a given root complex. References: https://bugzilla.kernel.org/show_bug.cgi?id=20232 Reported-by: Ozan Caglayan Tested-by: Ozan Caglayan Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/acpi/apei/hest.c | 22 +++++++++------------- drivers/acpi/pci_root.c | 35 +++++++++++++++++++++++++++++++++++ drivers/pci/pci.h | 8 -------- drivers/pci/pcie/aer/aerdrv.c | 1 + drivers/pci/pcie/aer/aerdrv.h | 3 --- drivers/pci/pcie/portdrv.h | 3 --- drivers/pci/pcie/portdrv_acpi.c | 23 ++++------------------- 7 files changed, 49 insertions(+), 46 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c index daa7bc63f1d4..4ee58e72b730 100644 --- a/drivers/acpi/apei/hest.c +++ b/drivers/acpi/apei/hest.c @@ -195,24 +195,24 @@ static int __init setup_hest_disable(char *str) __setup("hest_disable", setup_hest_disable); -static int __init hest_init(void) +void __init acpi_hest_init(void) { acpi_status status; int rc = -ENODEV; unsigned int ghes_count = 0; if (acpi_disabled) - goto err; + return; if (hest_disable) { - pr_info(HEST_PFX "HEST tabling parsing is disabled.\n"); - goto err; + pr_info(HEST_PFX "Table parsing disabled.\n"); + return; } status = acpi_get_table(ACPI_SIG_HEST, 0, (struct acpi_table_header **)&hest_tab); if (status == AE_NOT_FOUND) { - pr_info(HEST_PFX "Table is not found!\n"); + pr_info(HEST_PFX "Table not found.\n"); goto err; } else if (ACPI_FAILURE(status)) { const char *msg = acpi_format_exception(status); @@ -226,15 +226,11 @@ static int __init hest_init(void) goto err; rc = hest_ghes_dev_register(ghes_count); - if (rc) - goto err; - - pr_info(HEST_PFX "HEST table parsing is initialized.\n"); + if (!rc) { + pr_info(HEST_PFX "Table parsing has been initialized.\n"); + return; + } - return 0; err: hest_disable = 1; - return rc; } - -subsys_initcall(hest_init); diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 96668ad09622..d9766797cd98 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -36,6 +36,7 @@ #include #include #include +#include #define PREFIX "ACPI: " @@ -47,6 +48,11 @@ static int acpi_pci_root_add(struct acpi_device *device); static int acpi_pci_root_remove(struct acpi_device *device, int type); static int acpi_pci_root_start(struct acpi_device *device); +#define ACPI_PCIE_REQ_SUPPORT (OSC_EXT_PCI_CONFIG_SUPPORT \ + | OSC_ACTIVE_STATE_PWR_SUPPORT \ + | OSC_CLOCK_PWR_CAPABILITY_SUPPORT \ + | OSC_MSI_SUPPORT) + static const struct acpi_device_id root_device_ids[] = { {"PNP0A03", 0}, {"", 0}, @@ -566,6 +572,33 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device) if (flags != base_flags) acpi_pci_osc_support(root, flags); + if (!pcie_ports_disabled + && (flags & ACPI_PCIE_REQ_SUPPORT) == ACPI_PCIE_REQ_SUPPORT) { + flags = OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL + | OSC_PCI_EXPRESS_NATIVE_HP_CONTROL + | OSC_PCI_EXPRESS_PME_CONTROL; + + if (pci_aer_available()) { + if (aer_acpi_firmware_first()) + dev_dbg(root->bus->bridge, + "PCIe errors handled by BIOS.\n"); + else + flags |= OSC_PCI_EXPRESS_AER_CONTROL; + } + + dev_info(root->bus->bridge, + "Requesting ACPI _OSC control (0x%02x)\n", flags); + + status = acpi_pci_osc_control_set(device->handle, &flags, + OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); + if (ACPI_SUCCESS(status)) + dev_info(root->bus->bridge, + "ACPI _OSC control (0x%02x) granted\n", flags); + else + dev_dbg(root->bus->bridge, + "ACPI _OSC request failed (code %d)\n", status); + } + pci_acpi_add_bus_pm_notifier(device, root->bus); if (device->wakeup.flags.run_wake) device_set_run_wake(root->bus->bridge, true); @@ -603,6 +636,8 @@ static int __init acpi_pci_root_init(void) if (acpi_pci_disabled) return 0; + acpi_hest_init(); + pci_acpi_crs_quirks(); if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0) return -ENODEV; diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 7d33f6673868..16ae9659346b 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -140,14 +140,6 @@ static inline void pci_no_msi(void) { } static inline void pci_msi_init_pci_dev(struct pci_dev *dev) { } #endif -#ifdef CONFIG_PCIEAER -void pci_no_aer(void); -bool pci_aer_available(void); -#else -static inline void pci_no_aer(void) { } -static inline bool pci_aer_available(void) { return false; } -#endif - static inline int pci_no_d1d2(struct pci_dev *dev) { unsigned int parent_dstates = 0; diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index 2b2b6508efde..58ad7917553c 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -17,6 +17,7 @@ #include #include +#include #include #include #include diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h index 9656e3060412..80c11d131499 100644 --- a/drivers/pci/pcie/aer/aerdrv.h +++ b/drivers/pci/pcie/aer/aerdrv.h @@ -132,7 +132,6 @@ static inline int aer_osc_setup(struct pcie_device *pciedev) #ifdef CONFIG_ACPI_APEI extern int pcie_aer_get_firmware_first(struct pci_dev *pci_dev); -extern bool aer_acpi_firmware_first(void); #else static inline int pcie_aer_get_firmware_first(struct pci_dev *pci_dev) { @@ -140,8 +139,6 @@ static inline int pcie_aer_get_firmware_first(struct pci_dev *pci_dev) return pci_dev->__aer_firmware_first; return 0; } - -static inline bool aer_acpi_firmware_first(void) { return false; } #endif static inline void pcie_aer_force_firmware_first(struct pci_dev *pci_dev, diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index 8fcc03598b29..bd00a01aef14 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -20,9 +20,6 @@ #define get_descriptor_id(type, service) (((type - 4) << 4) | service) -extern bool pcie_ports_disabled; -extern bool pcie_ports_auto; - extern struct bus_type pcie_port_bus_type; extern int pcie_port_device_register(struct pci_dev *dev); #ifdef CONFIG_PM diff --git a/drivers/pci/pcie/portdrv_acpi.c b/drivers/pci/pcie/portdrv_acpi.c index 5982b6a63b89..a86b56e5f2f2 100644 --- a/drivers/pci/pcie/portdrv_acpi.c +++ b/drivers/pci/pcie/portdrv_acpi.c @@ -33,7 +33,7 @@ */ int pcie_port_acpi_setup(struct pci_dev *port, int *srv_mask) { - acpi_status status; + struct acpi_pci_root *root; acpi_handle handle; u32 flags; @@ -44,26 +44,11 @@ int pcie_port_acpi_setup(struct pci_dev *port, int *srv_mask) if (!handle) return -EINVAL; - flags = OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL - | OSC_PCI_EXPRESS_NATIVE_HP_CONTROL - | OSC_PCI_EXPRESS_PME_CONTROL; - - if (pci_aer_available()) { - if (aer_acpi_firmware_first()) - dev_dbg(&port->dev, "PCIe errors handled by BIOS.\n"); - else - flags |= OSC_PCI_EXPRESS_AER_CONTROL; - } - - status = acpi_pci_osc_control_set(handle, &flags, - OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); - if (ACPI_FAILURE(status)) { - dev_dbg(&port->dev, "ACPI _OSC request failed (code %d)\n", - status); + root = acpi_pci_find_root(handle); + if (!root) return -ENODEV; - } - dev_info(&port->dev, "ACPI _OSC control granted for 0x%02x\n", flags); + flags = root->osc_control_set; *srv_mask = PCIE_PORT_SERVICE_VC; if (flags & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL) -- cgit v1.2.1 From ff29530e651a3449aea6b0ef4c7048db9e22ef27 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 5 Jan 2011 10:26:41 -0700 Subject: PCI: sysfs: Update ROM to include default owner write access The PCI sysfs ROM interface requires an enabling write to access the ROM image, but the default file mode is 0400. The original proposed patch adding sysfs ROM support was a true read-only interface, with the enabling bit coming in as a feature request. I suspect it was simply an oversight that the file mode didn't get updated to match the API. Acked-by: Chris Wright Signed-off-by: Alex Williamson Signed-off-by: Jesse Barnes --- drivers/pci/pci-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 63d5042f2079..8ecaac983923 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -1149,7 +1149,7 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) sysfs_bin_attr_init(attr); attr->size = rom_size; attr->attr.name = "rom"; - attr->attr.mode = S_IRUSR; + attr->attr.mode = S_IRUSR | S_IWUSR; attr->read = pci_read_rom; attr->write = pci_write_rom; retval = sysfs_create_bin_file(&pdev->dev.kobj, attr); -- cgit v1.2.1 From b6e335aeeb114dccb07eaa09e8b62ff9510cf745 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 29 Dec 2010 13:21:23 +0100 Subject: PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events After recent changes related to wakeup events pm_wakeup_event() automatically checks if the given device is configured to signal wakeup, so pci_wakeup_event() may be a static inline function calling pm_wakeup_event() directly. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 16 ---------------- drivers/pci/pci.h | 6 ++++++ 2 files changed, 6 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6762dcae90ab..bf7ad2c09955 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1297,22 +1297,6 @@ bool pci_check_pme_status(struct pci_dev *dev) return ret; } -/* - * Time to wait before the system can be put into a sleep state after reporting - * a wakeup event signaled by a PCI device. - */ -#define PCI_WAKEUP_COOLDOWN 100 - -/** - * pci_wakeup_event - Report a wakeup event related to a given PCI device. - * @dev: Device to report the wakeup event for. - */ -void pci_wakeup_event(struct pci_dev *dev) -{ - if (device_may_wakeup(&dev->dev)) - pm_wakeup_event(&dev->dev, PCI_WAKEUP_COOLDOWN); -} - /** * pci_pme_wakeup - Wake up a PCI device if its PME Status bit is set. * @dev: Device to handle. diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 16ae9659346b..f69d6e0fda75 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -74,6 +74,12 @@ extern void pci_pm_init(struct pci_dev *dev); extern void platform_pci_wakeup_init(struct pci_dev *dev); extern void pci_allocate_cap_save_buffers(struct pci_dev *dev); +static inline void pci_wakeup_event(struct pci_dev *dev) +{ + /* Wait 100 ms before the system can be put into a sleep state. */ + pm_wakeup_event(&dev->dev, 100); +} + static inline bool pci_is_bridge(struct pci_dev *pci_dev) { return !!(pci_dev->subordinate); -- cgit v1.2.1 From 0f953bf6b4efa0daddb7c418130a9bd3ee97f7ed Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 29 Dec 2010 13:22:08 +0100 Subject: PCI/PM: Report wakeup events before resuming devices Make wakeup events be reported by the PCI subsystem before attempting to resume devices or queuing up runtime resume requests for them, because wakeup events should be reported as soon as they have been detected. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci-acpi.c | 2 +- drivers/pci/pci.c | 2 +- drivers/pci/pcie/pme.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index d7ea699b8ddc..6fe0772e0e7d 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -46,9 +46,9 @@ static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context) struct pci_dev *pci_dev = context; if (event == ACPI_NOTIFY_DEVICE_WAKE && pci_dev) { + pci_wakeup_event(pci_dev); pci_check_pme_status(pci_dev); pm_runtime_resume(&pci_dev->dev); - pci_wakeup_event(pci_dev); if (pci_dev->subordinate) pci_pme_wakeup_bus(pci_dev->subordinate); } diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index bf7ad2c09955..b714d787bddd 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1308,8 +1308,8 @@ bool pci_check_pme_status(struct pci_dev *dev) static int pci_pme_wakeup(struct pci_dev *dev, void *ign) { if (pci_check_pme_status(dev)) { - pm_request_resume(&dev->dev); pci_wakeup_event(dev); + pm_request_resume(&dev->dev); } return 0; } diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c index 073f0308c6b2..0057344a3fcb 100644 --- a/drivers/pci/pcie/pme.c +++ b/drivers/pci/pcie/pme.c @@ -84,8 +84,8 @@ static bool pcie_pme_walk_bus(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) { /* Skip PCIe devices in case we started from a root port. */ if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) { - pm_request_resume(&dev->dev); pci_wakeup_event(dev); + pm_request_resume(&dev->dev); ret = true; } @@ -187,8 +187,8 @@ static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id) /* The device is there, but we have to check its PME status. */ found = pci_check_pme_status(dev); if (found) { - pm_request_resume(&dev->dev); pci_wakeup_event(dev); + pm_request_resume(&dev->dev); } pci_dev_put(dev); } else if (devfn) { -- cgit v1.2.1 From 49731baa41df404c2c3f44555869ab387363af43 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 14 Jan 2011 18:43:57 +0100 Subject: block: restore multiple bd_link_disk_holder() support Commit e09b457b (block: simplify holder symlink handling) incorrectly assumed that there is only one link at maximum. dm may use multiple links and expects block layer to track reference count for each link, which is different from and unrelated to the exclusive device holder identified by @holder when the device is opened. Remove the single holder assumption and automatic removal of the link and revive the per-link reference count tracking. The code essentially behaves the same as before commit e09b457b sans the unnecessary kobject reference count dancing. While at it, note that this facility should not be used by anyone else than the current ones. Sysfs symlinks shouldn't be abused like this and the whole thing doesn't belong in the block layer at all. Signed-off-by: Tejun Heo Reported-by: Milan Broz Cc: Jun'ichi Nomura Cc: Neil Brown Cc: linux-raid@vger.kernel.org Cc: Kay Sievers Signed-off-by: Jens Axboe --- drivers/md/dm-table.c | 1 + drivers/md/md.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index dffa0ac7c4f0..38e4eb1bb965 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -350,6 +350,7 @@ static void close_dev(struct dm_dev_internal *d, struct mapped_device *md) if (!d->dm_dev.bdev) return; + bd_unlink_disk_holder(d->dm_dev.bdev, dm_disk(md)); blkdev_put(d->dm_dev.bdev, d->dm_dev.mode | FMODE_EXCL); d->dm_dev.bdev = NULL; } diff --git a/drivers/md/md.c b/drivers/md/md.c index cf8594c5ea21..b76cfc89e1b5 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1912,6 +1912,7 @@ static void unbind_rdev_from_array(mdk_rdev_t * rdev) MD_BUG(); return; } + bd_unlink_disk_holder(rdev->bdev, rdev->mddev->gendisk); list_del_rcu(&rdev->same_set); printk(KERN_INFO "md: unbind<%s>\n", bdevname(rdev->bdev,b)); rdev->mddev = NULL; -- cgit v1.2.1 From 92d76e81b9df5f33b0c9e2091e892560a437a15f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 14 Jan 2011 12:39:59 -0800 Subject: cassini: Fix build bustage on x86. Unfortunately, not all CONFIG_OF platforms provide pci_device_to_OF_node(). Change the test to CONFIG_SPARC for now to deal with the build regressions. Signed-off-by: David S. Miller --- drivers/net/cassini.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index 7206ab2cbbf8..3437613f0454 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -3203,7 +3203,7 @@ static int cas_get_vpd_info(struct cas *cp, unsigned char *dev_addr, int phy_type = CAS_PHY_MII_MDIO0; /* default phy type */ int mac_off = 0; -#if defined(CONFIG_OF) +#if defined(CONFIG_SPARC) const unsigned char *addr; #endif @@ -3354,7 +3354,7 @@ use_random_mac_addr: if (found & VPD_FOUND_MAC) goto done; -#if defined(CONFIG_OF) +#if defined(CONFIG_SPARC) addr = of_get_property(cp->of_node, "local-mac-address", NULL); if (addr != NULL) { memcpy(dev_addr, addr, 6); @@ -5031,7 +5031,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, cp->msg_enable = (cassini_debug < 0) ? CAS_DEF_MSG_ENABLE : cassini_debug; -#if defined(CONFIG_OF) +#if defined(CONFIG_SPARC) cp->of_node = pci_device_to_OF_node(pdev); #endif -- cgit v1.2.1 From ad4650a89ac47bd153cbb76c3fd6eb1fa6f315b7 Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Fri, 14 Jan 2011 03:02:37 +0000 Subject: GRETH: added raw AMBA vendor/device number to match against. Signed-off-by: Daniel Hellstrom Signed-off-by: David S. Miller --- drivers/net/greth.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/greth.c b/drivers/net/greth.c index 27d6960ce09e..1c2dbdb43631 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -1600,6 +1600,9 @@ static struct of_device_id greth_of_match[] = { { .name = "GAISLER_ETHMAC", }, + { + .name = "01_01d", + }, {}, }; -- cgit v1.2.1 From bbe9e637330abe55442aebe799425e224086959f Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Fri, 14 Jan 2011 03:02:38 +0000 Subject: GRETH: fix opening/closing When NAPI is disabled there is no point in having IRQs enabled, TX/RX should be off before clearing the TX/RX descriptor rings. Signed-off-by: Daniel Hellstrom Signed-off-by: David S. Miller --- drivers/net/greth.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/greth.c b/drivers/net/greth.c index 1c2dbdb43631..b307696e0f63 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -356,6 +356,8 @@ static int greth_open(struct net_device *dev) dev_dbg(&dev->dev, " starting queue\n"); netif_start_queue(dev); + GRETH_REGSAVE(greth->regs->status, 0xFF); + napi_enable(&greth->napi); greth_enable_irqs(greth); @@ -371,7 +373,9 @@ static int greth_close(struct net_device *dev) napi_disable(&greth->napi); + greth_disable_irqs(greth); greth_disable_tx(greth); + greth_disable_rx(greth); netif_stop_queue(dev); -- cgit v1.2.1 From 2a2bc012b98729ce9a39386faed28d11ee021683 Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Fri, 14 Jan 2011 03:02:39 +0000 Subject: GRETH: GBit transmit descriptor handling optimization It is safe to enable all fragments before enabling the first descriptor, this way all descriptors don't have to be processed twice, added extra memory barrier. Signed-off-by: Daniel Hellstrom Signed-off-by: David S. Miller --- drivers/net/greth.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/greth.c b/drivers/net/greth.c index b307696e0f63..869e38d6f41b 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -503,7 +503,7 @@ greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev) greth->tx_skbuff[curr_tx] = NULL; bdp = greth->tx_bd_base + curr_tx; - status = GRETH_TXBD_CSALL; + status = GRETH_TXBD_CSALL | GRETH_BD_EN; status |= frag->size & GRETH_BD_LEN; /* Wrap around descriptor ring */ @@ -540,26 +540,27 @@ greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev) wmb(); - /* Enable the descriptors that we configured ... */ - for (i = 0; i < nr_frags + 1; i++) { - bdp = greth->tx_bd_base + greth->tx_next; - greth_write_bd(&bdp->stat, greth_read_bd(&bdp->stat) | GRETH_BD_EN); - greth->tx_next = NEXT_TX(greth->tx_next); - greth->tx_free--; - } + /* Enable the descriptor chain by enabling the first descriptor */ + bdp = greth->tx_bd_base + greth->tx_next; + greth_write_bd(&bdp->stat, greth_read_bd(&bdp->stat) | GRETH_BD_EN); + greth->tx_next = curr_tx; + greth->tx_free -= nr_frags + 1; + + wmb(); greth_enable_tx(greth); return NETDEV_TX_OK; frag_map_error: - /* Unmap SKB mappings that succeeded */ + /* Unmap SKB mappings that succeeded and disable descriptor */ for (i = 0; greth->tx_next + i != curr_tx; i++) { bdp = greth->tx_bd_base + greth->tx_next + i; dma_unmap_single(greth->dev, greth_read_bd(&bdp->addr), greth_read_bd(&bdp->stat) & GRETH_BD_LEN, DMA_TO_DEVICE); + greth_write_bd(&bdp->stat, 0); } map_error: if (net_ratelimit()) -- cgit v1.2.1 From b669e7f0580f3c0058f1b32c276ef6da8f05c138 Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Fri, 14 Jan 2011 03:02:40 +0000 Subject: GRETH: fixed skb buffer memory leak on frame errors A new SKB buffer should not be allocated when the old SKB is reused. Signed-off-by: Daniel Hellstrom Signed-off-by: David S. Miller --- drivers/net/greth.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/greth.c b/drivers/net/greth.c index 869e38d6f41b..9386bce9dea5 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -870,10 +870,9 @@ static int greth_rx_gbit(struct net_device *dev, int limit) } } - /* Allocate new skb to replace current */ - newskb = netdev_alloc_skb(dev, MAX_FRAME_SIZE + NET_IP_ALIGN); - - if (!bad && newskb) { + /* Allocate new skb to replace current, not needed if the + * current skb can be reused */ + if (!bad && (newskb=netdev_alloc_skb(dev, MAX_FRAME_SIZE + NET_IP_ALIGN))) { skb_reserve(newskb, NET_IP_ALIGN); dma_addr = dma_map_single(greth->dev, @@ -910,11 +909,22 @@ static int greth_rx_gbit(struct net_device *dev, int limit) if (net_ratelimit()) dev_warn(greth->dev, "Could not create DMA mapping, dropping packet\n"); dev_kfree_skb(newskb); + /* reusing current skb, so it is a drop */ dev->stats.rx_dropped++; } + } else if (bad) { + /* Bad Frame transfer, the skb is reused */ + dev->stats.rx_dropped++; } else { + /* Failed Allocating a new skb. This is rather stupid + * but the current "filled" skb is reused, as if + * transfer failure. One could argue that RX descriptor + * table handling should be divided into cleaning and + * filling as the TX part of the driver + */ if (net_ratelimit()) dev_warn(greth->dev, "Could not allocate SKB, dropping packet\n"); + /* reusing current skb, so it is a drop */ dev->stats.rx_dropped++; } -- cgit v1.2.1 From 2436af8ca7a6c4679cf7da7e3867f1d5cd8528b7 Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Fri, 14 Jan 2011 03:02:41 +0000 Subject: GRETH: avoid writing bad speed/duplex when setting transfer mode Signed-off-by: Daniel Hellstrom Signed-off-by: David S. Miller --- drivers/net/greth.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/greth.c b/drivers/net/greth.c index 9386bce9dea5..e48d18216cbe 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -1232,29 +1232,26 @@ static void greth_link_change(struct net_device *dev) struct greth_private *greth = netdev_priv(dev); struct phy_device *phydev = greth->phy; unsigned long flags; - int status_change = 0; + u32 ctrl; spin_lock_irqsave(&greth->devlock, flags); if (phydev->link) { if ((greth->speed != phydev->speed) || (greth->duplex != phydev->duplex)) { - - GRETH_REGANDIN(greth->regs->control, - ~(GRETH_CTRL_FD | GRETH_CTRL_SP | GRETH_CTRL_GB)); + ctrl = GRETH_REGLOAD(greth->regs->control) & + ~(GRETH_CTRL_FD | GRETH_CTRL_SP | GRETH_CTRL_GB); if (phydev->duplex) - GRETH_REGORIN(greth->regs->control, GRETH_CTRL_FD); - - if (phydev->speed == SPEED_100) { - - GRETH_REGORIN(greth->regs->control, GRETH_CTRL_SP); - } + ctrl |= GRETH_CTRL_FD; + if (phydev->speed == SPEED_100) + ctrl |= GRETH_CTRL_SP; else if (phydev->speed == SPEED_1000) - GRETH_REGORIN(greth->regs->control, GRETH_CTRL_GB); + ctrl |= GRETH_CTRL_GB; + GRETH_REGSAVE(greth->regs->control, ctrl); greth->speed = phydev->speed; greth->duplex = phydev->duplex; status_change = 1; -- cgit v1.2.1 From 1ca23434dd0001bd2bfff31b8251436b34aa9066 Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Fri, 14 Jan 2011 03:02:42 +0000 Subject: GRETH: handle frame error interrupts Frame error interrupts must also be handled since the RX flag only indicates successful reception, it is unlikely but the old code may lead to dead lock if 128 error frames are recieved in a row. Signed-off-by: Daniel Hellstrom Signed-off-by: David S. Miller --- drivers/net/greth.c | 9 +++++---- drivers/net/greth.h | 2 ++ 2 files changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/greth.c b/drivers/net/greth.c index e48d18216cbe..b888abe6cd21 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -586,12 +586,13 @@ static irqreturn_t greth_interrupt(int irq, void *dev_id) status = GRETH_REGLOAD(greth->regs->status); /* Handle rx and tx interrupts through poll */ - if (status & (GRETH_INT_RX | GRETH_INT_TX)) { + if (status & (GRETH_INT_RE | GRETH_INT_RX | + GRETH_INT_TE | GRETH_INT_TX)) { /* Clear interrupt status */ - GRETH_REGORIN(greth->regs->status, - status & (GRETH_INT_RX | GRETH_INT_TX)); - + GRETH_REGSAVE(greth->regs->status, + status & (GRETH_INT_RE | GRETH_INT_RX | + GRETH_INT_TE | GRETH_INT_TX)); retval = IRQ_HANDLED; /* Disable interrupts and schedule poll() */ diff --git a/drivers/net/greth.h b/drivers/net/greth.h index 03ad903cd676..be0f2062bd14 100644 --- a/drivers/net/greth.h +++ b/drivers/net/greth.h @@ -23,6 +23,7 @@ #define GRETH_BD_LEN 0x7FF #define GRETH_TXEN 0x1 +#define GRETH_INT_TE 0x2 #define GRETH_INT_TX 0x8 #define GRETH_TXI 0x4 #define GRETH_TXBD_STATUS 0x0001C000 @@ -35,6 +36,7 @@ #define GRETH_TXBD_ERR_UE 0x4000 #define GRETH_TXBD_ERR_AL 0x8000 +#define GRETH_INT_RE 0x1 #define GRETH_INT_RX 0x4 #define GRETH_RXEN 0x2 #define GRETH_RXI 0x8 -- cgit v1.2.1 From 0f73f2c5a3ebb957ee66718c903c17ed71a4fc2e Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Fri, 14 Jan 2011 03:02:43 +0000 Subject: GRETH: resolve SMP issues and other problems Fixes the following: 1. POLL should not enable IRQ when work is not completed 2. No locking between TX descriptor cleaning and XMIT descriptor handling 3. No locking between RX POLL and XMIT modifying control register 4. Since TX cleaning (called from POLL) is running in parallel with XMIT unnecessary locking is needed. 5. IRQ handler looks at RX frame status solely, this is wrong when IRQ is temporarily disabled (in POLL), and when IRQ is shared. 6. IRQ handler clears IRQ status, which is unnecessary 7. TX queue was stopped in preventing cause when not MAX_SKB_FRAGS+1 descriptors were available after a SKB been scheduled by XMIT. Instead the TX queue is stopped first when not enough descriptors are available upon entering XMIT. It was hard to split up this patch in smaller pieces since all are tied together somehow. Note the RX flag used in the interrupt handler does not signal that interrupt was asserted, but that a frame was received. Same goes for TX. Also, IRQ is not asserted when the RX flag is set before enabling IRQ enable until a new frame is received. So extra care must be taken to avoid enabling IRQ and all descriptors are already used, hence dead lock will upon us. See new POLL implementation that enableds IRQ then look at the RX flag to determine if one or more IRQs may have been missed. TX/RX flags are cleared before handling previously enabled descriptors, this ensures that the RX/TX flags are valid when determining if IRQ should be turned on again. By moving TX cleaning from POLL to XMIT in the standard case, removes some locking trouble. Enabling TX cleaning from poll only when not enough TX descriptors are available is safe because the TX queue is at the same time stopped, thus XMIT will not be called. The TX queue is woken up again when enough descriptrs are available. TX Frames are always enabled with IRQ, however the TX IRQ Enable flag will not be enabled until XMIT must wait for free descriptors. Locking RX and XMIT parts of the driver from each other is needed because the RX/TX enable bits share the same register. Signed-off-by: Daniel Hellstrom Signed-off-by: David S. Miller --- drivers/net/greth.c | 159 ++++++++++++++++++++++++++++++---------------------- 1 file changed, 92 insertions(+), 67 deletions(-) (limited to 'drivers') diff --git a/drivers/net/greth.c b/drivers/net/greth.c index b888abe6cd21..fdb0333f5cb6 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -1,7 +1,7 @@ /* * Aeroflex Gaisler GRETH 10/100/1G Ethernet MAC. * - * 2005-2009 (c) Aeroflex Gaisler AB + * 2005-2010 (c) Aeroflex Gaisler AB * * This driver supports GRETH 10/100 and GRETH 10/100/1G Ethernet MACs * available in the GRLIB VHDL IP core library. @@ -392,12 +392,20 @@ greth_start_xmit(struct sk_buff *skb, struct net_device *dev) struct greth_private *greth = netdev_priv(dev); struct greth_bd *bdp; int err = NETDEV_TX_OK; - u32 status, dma_addr; + u32 status, dma_addr, ctrl; + unsigned long flags; - bdp = greth->tx_bd_base + greth->tx_next; + /* Clean TX Ring */ + greth_clean_tx(greth->netdev); if (unlikely(greth->tx_free <= 0)) { + spin_lock_irqsave(&greth->devlock, flags);/*save from poll/irq*/ + ctrl = GRETH_REGLOAD(greth->regs->control); + /* Enable TX IRQ only if not already in poll() routine */ + if (ctrl & GRETH_RXI) + GRETH_REGSAVE(greth->regs->control, ctrl | GRETH_TXI); netif_stop_queue(dev); + spin_unlock_irqrestore(&greth->devlock, flags); return NETDEV_TX_BUSY; } @@ -410,13 +418,14 @@ greth_start_xmit(struct sk_buff *skb, struct net_device *dev) goto out; } + bdp = greth->tx_bd_base + greth->tx_next; dma_addr = greth_read_bd(&bdp->addr); memcpy((unsigned char *) phys_to_virt(dma_addr), skb->data, skb->len); dma_sync_single_for_device(greth->dev, dma_addr, skb->len, DMA_TO_DEVICE); - status = GRETH_BD_EN | (skb->len & GRETH_BD_LEN); + status = GRETH_BD_EN | GRETH_BD_IE | (skb->len & GRETH_BD_LEN); /* Wrap around descriptor ring */ if (greth->tx_next == GRETH_TXBD_NUM_MASK) { @@ -426,22 +435,11 @@ greth_start_xmit(struct sk_buff *skb, struct net_device *dev) greth->tx_next = NEXT_TX(greth->tx_next); greth->tx_free--; - /* No more descriptors */ - if (unlikely(greth->tx_free == 0)) { - - /* Free transmitted descriptors */ - greth_clean_tx(dev); - - /* If nothing was cleaned, stop queue & wait for irq */ - if (unlikely(greth->tx_free == 0)) { - status |= GRETH_BD_IE; - netif_stop_queue(dev); - } - } - /* Write descriptor control word and enable transmission */ greth_write_bd(&bdp->stat, status); + spin_lock_irqsave(&greth->devlock, flags); /*save from poll/irq*/ greth_enable_tx(greth); + spin_unlock_irqrestore(&greth->devlock, flags); out: dev_kfree_skb(skb); @@ -454,13 +452,23 @@ greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev) { struct greth_private *greth = netdev_priv(dev); struct greth_bd *bdp; - u32 status = 0, dma_addr; + u32 status = 0, dma_addr, ctrl; int curr_tx, nr_frags, i, err = NETDEV_TX_OK; + unsigned long flags; nr_frags = skb_shinfo(skb)->nr_frags; + /* Clean TX Ring */ + greth_clean_tx_gbit(dev); + if (greth->tx_free < nr_frags + 1) { + spin_lock_irqsave(&greth->devlock, flags);/*save from poll/irq*/ + ctrl = GRETH_REGLOAD(greth->regs->control); + /* Enable TX IRQ only if not already in poll() routine */ + if (ctrl & GRETH_RXI) + GRETH_REGSAVE(greth->regs->control, ctrl | GRETH_TXI); netif_stop_queue(dev); + spin_unlock_irqrestore(&greth->devlock, flags); err = NETDEV_TX_BUSY; goto out; } @@ -513,14 +521,8 @@ greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev) /* More fragments left */ if (i < nr_frags - 1) status |= GRETH_TXBD_MORE; - - /* ... last fragment, check if out of descriptors */ - else if (greth->tx_free - nr_frags - 1 < (MAX_SKB_FRAGS + 1)) { - - /* Enable interrupts and stop queue */ - status |= GRETH_BD_IE; - netif_stop_queue(dev); - } + else + status |= GRETH_BD_IE; /* enable IRQ on last fragment */ greth_write_bd(&bdp->stat, status); @@ -548,7 +550,9 @@ greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev) wmb(); + spin_lock_irqsave(&greth->devlock, flags); /*save from poll/irq*/ greth_enable_tx(greth); + spin_unlock_irqrestore(&greth->devlock, flags); return NETDEV_TX_OK; @@ -570,12 +574,11 @@ out: return err; } - static irqreturn_t greth_interrupt(int irq, void *dev_id) { struct net_device *dev = dev_id; struct greth_private *greth; - u32 status; + u32 status, ctrl; irqreturn_t retval = IRQ_NONE; greth = netdev_priv(dev); @@ -585,14 +588,15 @@ static irqreturn_t greth_interrupt(int irq, void *dev_id) /* Get the interrupt events that caused us to be here. */ status = GRETH_REGLOAD(greth->regs->status); - /* Handle rx and tx interrupts through poll */ - if (status & (GRETH_INT_RE | GRETH_INT_RX | - GRETH_INT_TE | GRETH_INT_TX)) { + /* Must see if interrupts are enabled also, INT_TX|INT_RX flags may be + * set regardless of whether IRQ is enabled or not. Especially + * important when shared IRQ. + */ + ctrl = GRETH_REGLOAD(greth->regs->control); - /* Clear interrupt status */ - GRETH_REGSAVE(greth->regs->status, - status & (GRETH_INT_RE | GRETH_INT_RX | - GRETH_INT_TE | GRETH_INT_TX)); + /* Handle rx and tx interrupts through poll */ + if (((status & (GRETH_INT_RE | GRETH_INT_RX)) && (ctrl & GRETH_RXI)) || + ((status & (GRETH_INT_TE | GRETH_INT_TX)) && (ctrl & GRETH_TXI))) { retval = IRQ_HANDLED; /* Disable interrupts and schedule poll() */ @@ -616,6 +620,8 @@ static void greth_clean_tx(struct net_device *dev) while (1) { bdp = greth->tx_bd_base + greth->tx_last; + GRETH_REGSAVE(greth->regs->status, GRETH_INT_TE | GRETH_INT_TX); + mb(); stat = greth_read_bd(&bdp->stat); if (unlikely(stat & GRETH_BD_EN)) @@ -676,7 +682,10 @@ static void greth_clean_tx_gbit(struct net_device *dev) /* We only clean fully completed SKBs */ bdp_last_frag = greth->tx_bd_base + SKIP_TX(greth->tx_last, nr_frags); - stat = bdp_last_frag->stat; + + GRETH_REGSAVE(greth->regs->status, GRETH_INT_TE | GRETH_INT_TX); + mb(); + stat = greth_read_bd(&bdp_last_frag->stat); if (stat & GRETH_BD_EN) break; @@ -708,21 +717,9 @@ static void greth_clean_tx_gbit(struct net_device *dev) greth->tx_free += nr_frags+1; dev_kfree_skb(skb); } - if (greth->tx_free > (MAX_SKB_FRAGS + 1)) { - netif_wake_queue(dev); - } -} -static int greth_pending_packets(struct greth_private *greth) -{ - struct greth_bd *bdp; - u32 status; - bdp = greth->rx_bd_base + greth->rx_cur; - status = greth_read_bd(&bdp->stat); - if (status & GRETH_BD_EN) - return 0; - else - return 1; + if (netif_queue_stopped(dev) && (greth->tx_free > (MAX_SKB_FRAGS+1))) + netif_wake_queue(dev); } static int greth_rx(struct net_device *dev, int limit) @@ -733,20 +730,24 @@ static int greth_rx(struct net_device *dev, int limit) int pkt_len; int bad, count; u32 status, dma_addr; + unsigned long flags; greth = netdev_priv(dev); for (count = 0; count < limit; ++count) { bdp = greth->rx_bd_base + greth->rx_cur; + GRETH_REGSAVE(greth->regs->status, GRETH_INT_RE | GRETH_INT_RX); + mb(); status = greth_read_bd(&bdp->stat); - dma_addr = greth_read_bd(&bdp->addr); - bad = 0; if (unlikely(status & GRETH_BD_EN)) { break; } + dma_addr = greth_read_bd(&bdp->addr); + bad = 0; + /* Check status for errors. */ if (unlikely(status & GRETH_RXBD_STATUS)) { if (status & GRETH_RXBD_ERR_FT) { @@ -808,7 +809,9 @@ static int greth_rx(struct net_device *dev, int limit) dma_sync_single_for_device(greth->dev, dma_addr, MAX_FRAME_SIZE, DMA_FROM_DEVICE); + spin_lock_irqsave(&greth->devlock, flags); /* save from XMIT */ greth_enable_rx(greth); + spin_unlock_irqrestore(&greth->devlock, flags); greth->rx_cur = NEXT_RX(greth->rx_cur); } @@ -842,6 +845,7 @@ static int greth_rx_gbit(struct net_device *dev, int limit) int pkt_len; int bad, count = 0; u32 status, dma_addr; + unsigned long flags; greth = netdev_priv(dev); @@ -849,6 +853,8 @@ static int greth_rx_gbit(struct net_device *dev, int limit) bdp = greth->rx_bd_base + greth->rx_cur; skb = greth->rx_skbuff[greth->rx_cur]; + GRETH_REGSAVE(greth->regs->status, GRETH_INT_RE | GRETH_INT_RX); + mb(); status = greth_read_bd(&bdp->stat); bad = 0; @@ -936,7 +942,9 @@ static int greth_rx_gbit(struct net_device *dev, int limit) wmb(); greth_write_bd(&bdp->stat, status); + spin_lock_irqsave(&greth->devlock, flags); greth_enable_rx(greth); + spin_unlock_irqrestore(&greth->devlock, flags); greth->rx_cur = NEXT_RX(greth->rx_cur); } @@ -948,15 +956,18 @@ static int greth_poll(struct napi_struct *napi, int budget) { struct greth_private *greth; int work_done = 0; + unsigned long flags; + u32 mask, ctrl; greth = container_of(napi, struct greth_private, napi); - if (greth->gbit_mac) { - greth_clean_tx_gbit(greth->netdev); - } else { - greth_clean_tx(greth->netdev); +restart_txrx_poll: + if (netif_queue_stopped(greth->netdev)) { + if (greth->gbit_mac) + greth_clean_tx_gbit(greth->netdev); + else + greth_clean_tx(greth->netdev); } -restart_poll: if (greth->gbit_mac) { work_done += greth_rx_gbit(greth->netdev, budget - work_done); } else { @@ -965,15 +976,29 @@ restart_poll: if (work_done < budget) { - napi_complete(napi); + spin_lock_irqsave(&greth->devlock, flags); - if (greth_pending_packets(greth)) { - napi_reschedule(napi); - goto restart_poll; + ctrl = GRETH_REGLOAD(greth->regs->control); + if (netif_queue_stopped(greth->netdev)) { + GRETH_REGSAVE(greth->regs->control, + ctrl | GRETH_TXI | GRETH_RXI); + mask = GRETH_INT_RX | GRETH_INT_RE | + GRETH_INT_TX | GRETH_INT_TE; + } else { + GRETH_REGSAVE(greth->regs->control, ctrl | GRETH_RXI); + mask = GRETH_INT_RX | GRETH_INT_RE; + } + + if (GRETH_REGLOAD(greth->regs->status) & mask) { + GRETH_REGSAVE(greth->regs->control, ctrl); + spin_unlock_irqrestore(&greth->devlock, flags); + goto restart_txrx_poll; + } else { + __napi_complete(napi); + spin_unlock_irqrestore(&greth->devlock, flags); } } - greth_enable_irqs(greth); return work_done; } @@ -1168,11 +1193,11 @@ static const struct ethtool_ops greth_ethtool_ops = { }; static struct net_device_ops greth_netdev_ops = { - .ndo_open = greth_open, - .ndo_stop = greth_close, - .ndo_start_xmit = greth_start_xmit, - .ndo_set_mac_address = greth_set_mac_add, - .ndo_validate_addr = eth_validate_addr, + .ndo_open = greth_open, + .ndo_stop = greth_close, + .ndo_start_xmit = greth_start_xmit, + .ndo_set_mac_address = greth_set_mac_add, + .ndo_validate_addr = eth_validate_addr, }; static inline int wait_for_mdio(struct greth_private *greth) -- cgit v1.2.1 From 5219bf884b6e2b54e734ca1799b6f0014bb2b4b7 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 14 Jan 2011 22:03:49 +0100 Subject: i2c: Unregister dummy devices last on adapter removal Remove real devices first and dummy devices last. This gives device driver which instantiated dummy devices themselves a chance to clean them up before we do. Signed-off-by: Jean Delvare Tested-by: Hans Verkuil Cc: stable@kernel.org --- drivers/i2c/i2c-core.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index c7db6980e3a3..b916675605b4 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1019,6 +1019,14 @@ static int i2c_do_del_adapter(struct i2c_driver *driver, } static int __unregister_client(struct device *dev, void *dummy) +{ + struct i2c_client *client = i2c_verify_client(dev); + if (client && strcmp(client->name, "dummy")) + i2c_unregister_device(client); + return 0; +} + +static int __unregister_dummy(struct device *dev, void *dummy) { struct i2c_client *client = i2c_verify_client(dev); if (client) @@ -1075,8 +1083,12 @@ int i2c_del_adapter(struct i2c_adapter *adap) mutex_unlock(&adap->userspace_clients_lock); /* Detach any active clients. This can't fail, thus we do not - checking the returned value. */ + * check the returned value. This is a two-pass process, because + * we can't remove the dummy devices during the first pass: they + * could have been instantiated by real devices wishing to clean + * them up properly, so we give them a chance to do that first. */ res = device_for_each_child(&adap->dev, NULL, __unregister_client); + res = device_for_each_child(&adap->dev, NULL, __unregister_dummy); #ifdef CONFIG_I2C_COMPAT class_compat_remove_link(i2c_adapter_compat_class, &adap->dev, -- cgit v1.2.1 From d529de2994880d345d7588f92d5a426f63089ba3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 14 Jan 2011 22:03:49 +0100 Subject: i2c: Factor out runtime suspend checks from PM operations When devices use dev_pm_ops the I2C API is implementing standard functionality for integration with runtime PM and for checking for the presence of a per device op. The PM core provides pm_generic_ functions implementing this behaviour - use them to reduce coupling with future PM updates. Signed-off-by: Mark Brown Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 68 +++++++++++++++----------------------------------- 1 file changed, 20 insertions(+), 48 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index b916675605b4..0f9dc7dc15f1 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -196,88 +196,60 @@ static int i2c_device_pm_suspend(struct device *dev) { const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - if (pm) { - if (pm_runtime_suspended(dev)) - return 0; - else - return pm->suspend ? pm->suspend(dev) : 0; - } - - return i2c_legacy_suspend(dev, PMSG_SUSPEND); + if (pm) + return pm_generic_suspend(dev); + else + return i2c_legacy_suspend(dev, PMSG_SUSPEND); } static int i2c_device_pm_resume(struct device *dev) { const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - int ret; if (pm) - ret = pm->resume ? pm->resume(dev) : 0; + return pm_generic_resume(dev); else - ret = i2c_legacy_resume(dev); - - return ret; + return i2c_legacy_resume(dev); } static int i2c_device_pm_freeze(struct device *dev) { const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - if (pm) { - if (pm_runtime_suspended(dev)) - return 0; - else - return pm->freeze ? pm->freeze(dev) : 0; - } - - return i2c_legacy_suspend(dev, PMSG_FREEZE); + if (pm) + return pm_generic_freeze(dev); + else + return i2c_legacy_suspend(dev, PMSG_FREEZE); } static int i2c_device_pm_thaw(struct device *dev) { const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - if (pm) { - if (pm_runtime_suspended(dev)) - return 0; - else - return pm->thaw ? pm->thaw(dev) : 0; - } - - return i2c_legacy_resume(dev); + if (pm) + return pm_generic_thaw(dev); + else + return i2c_legacy_resume(dev); } static int i2c_device_pm_poweroff(struct device *dev) { const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - if (pm) { - if (pm_runtime_suspended(dev)) - return 0; - else - return pm->poweroff ? pm->poweroff(dev) : 0; - } - - return i2c_legacy_suspend(dev, PMSG_HIBERNATE); + if (pm) + return pm_generic_poweroff(dev); + else + return i2c_legacy_suspend(dev, PMSG_HIBERNATE); } static int i2c_device_pm_restore(struct device *dev) { const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - int ret; if (pm) - ret = pm->restore ? pm->restore(dev) : 0; + return pm_generic_restore(dev); else - ret = i2c_legacy_resume(dev); - - if (!ret) { - pm_runtime_disable(dev); - pm_runtime_set_active(dev); - pm_runtime_enable(dev); - } - - return ret; + return i2c_legacy_resume(dev); } #else /* !CONFIG_PM_SLEEP */ #define i2c_device_pm_suspend NULL -- cgit v1.2.1 From f4e8db31a83ad019e9ae06edb9c2f89de66bc7b7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 14 Jan 2011 22:03:50 +0100 Subject: i2c: Encourage move to dev_pm_ops by warning on use of legacy methods Since the PM core wishes to transition away from the legacy suspend and resume methods and since removing them makes using PM core features like runtime PM much easier start warning when a driver is registered using the legacy methods. Signed-off-by: Mark Brown Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 0f9dc7dc15f1..f0bd5bcdf563 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1124,6 +1124,14 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) if (res) return res; + /* Drivers should switch to dev_pm_ops instead. */ + if (driver->suspend) + pr_warn("i2c-core: driver [%s] using legacy suspend method\n", + driver->driver.name); + if (driver->resume) + pr_warn("i2c-core: driver [%s] using legacy resume method\n", + driver->driver.name); + pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name); INIT_LIST_HEAD(&driver->clients); -- cgit v1.2.1 From 94a1b6d8eb903818773ad24fe48529b0d295052d Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 13 Jan 2011 17:24:22 +0530 Subject: spi/amba-pl022: fixing compilation warning. clk_freq is used uninitialized in pl022_setup routine. This patch fix compilation warning for using uninitialized variable Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/spi/amba-pl022.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index a2a5921c730a..71a1219a995d 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -1795,7 +1795,7 @@ static int pl022_setup(struct spi_device *spi) { struct pl022_config_chip const *chip_info; struct chip_data *chip; - struct ssp_clock_params clk_freq; + struct ssp_clock_params clk_freq = {0, }; int status = 0; struct pl022 *pl022 = spi_master_get_devdata(spi->master); unsigned int bits = spi->bits_per_word; -- cgit v1.2.1 From 9a1fe2f27f71dd275caf2be5be2fa59bd2a3f8d4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 14 Jan 2011 23:25:57 +0100 Subject: ACPI / ACPICA: Initialize the global lock spinlock as appropriate Commit 9cd0314 (ACPI / ACPICA: Fix global lock acquisition) forgot to initialize the spinlock it added. Fix that. Reported-and-tested-by: Sergey Senozhatsky Signed-off-by: Rafael J. Wysocki Tested-by: Linus Torvalds Signed-off-by: Linus Torvalds --- drivers/acpi/acpica/acglobal.h | 2 ++ drivers/acpi/acpica/evmisc.c | 2 -- drivers/acpi/acpica/utmutex.c | 1 + 3 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 9bb69c59bb12..0e4dba0d0325 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -228,8 +228,10 @@ ACPI_EXTERN u8 acpi_gbl_global_lock_present; */ ACPI_EXTERN spinlock_t _acpi_gbl_gpe_lock; /* For GPE data structs and registers */ ACPI_EXTERN spinlock_t _acpi_gbl_hardware_lock; /* For ACPI H/W except GPE registers */ +ACPI_EXTERN spinlock_t _acpi_ev_global_lock_pending_lock; /* For global lock */ #define acpi_gbl_gpe_lock &_acpi_gbl_gpe_lock #define acpi_gbl_hardware_lock &_acpi_gbl_hardware_lock +#define acpi_ev_global_lock_pending_lock &_acpi_ev_global_lock_pending_lock /***************************************************************************** * diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index 8e31bb5a973a..38bba66fcce5 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -293,8 +293,6 @@ static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context) * ******************************************************************************/ static u8 acpi_ev_global_lock_pending; -static spinlock_t _acpi_ev_global_lock_pending_lock; -#define acpi_ev_global_lock_pending_lock &_acpi_ev_global_lock_pending_lock static u32 acpi_ev_global_lock_handler(void *context) { diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c index d9efa495b433..199528ff7f1d 100644 --- a/drivers/acpi/acpica/utmutex.c +++ b/drivers/acpi/acpica/utmutex.c @@ -85,6 +85,7 @@ acpi_status acpi_ut_mutex_initialize(void) spin_lock_init(acpi_gbl_gpe_lock); spin_lock_init(acpi_gbl_hardware_lock); + spin_lock_init(acpi_ev_global_lock_pending_lock); /* Mutex for _OSI support */ status = acpi_os_create_mutex(&acpi_gbl_osi_mutex); -- cgit v1.2.1 From 7111ebc97ed53a32314011c85a6f235f0dab8ae8 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 14 Dec 2010 13:24:55 -0800 Subject: xhci: Resume bus on any port status change. The original code that resumed the USB bus on a port status change would only do so when there was a device connected to the port. If a device was just disconnected, the event would be queued for khubd, but khubd wouldn't run. That would leave the connect status change (CSC) bit set. If a USB device was plugged into that same port, the xHCI host controller would set the current connect status (CCS) bit. But since the CSC bit was already set, it would not generate an interrupt for a port status change event. That would mean the user could "Safely Remove" a device, have the bus suspend, disconnect the device, re-plug it in, and then the device would never be enumerated. Plugging in a different device on another port would cause the bus to resume, and khubd would notice the re-connected device. Running lsusb would also resume the bus, leading users to report the problem "went away" when using diagnostic tools. The solution is to resume the bus when a port status change event is received, regardless of the port status. Thank you very much to Maddog for helping me track down this Heisenbug. This patch should be queued for the 2.6.37 stable tree. Signed-off-by: Sarah Sharp Reported-by: Jon 'maddog' Hall Tested-by: Andiry Xu Cc: stable@kernel.org --- drivers/usb/host/xhci-ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index df558f6f84e3..62c70c230e83 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1188,7 +1188,7 @@ static void handle_port_status(struct xhci_hcd *xhci, addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS * (port_id - 1); temp = xhci_readl(xhci, addr); - if ((temp & PORT_CONNECT) && (hcd->state == HC_STATE_SUSPENDED)) { + if (hcd->state == HC_STATE_SUSPENDED) { xhci_dbg(xhci, "resume root hub\n"); usb_hcd_resume_root_hub(hcd); } -- cgit v1.2.1 From 0029227f1bc30b6c809ae751f9e7af6cef900997 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Mon, 27 Dec 2010 17:39:02 +0800 Subject: xHCI: synchronize irq in xhci_suspend() Synchronize the interrupts instead of free them in xhci_suspend(). This will prevent a double free when the host is suspended and then the card removed. Set the flag hcd->msix_enabled when using MSI-X, and check the flag in suspend_common(). MSI-X synchronization will be handled by xhci_suspend(), and MSI/INTx will be synchronized in suspend_common(). This patch should be queued for the 2.6.37 stable tree. Reported-by: Matthew Garrett Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/core/hcd-pci.c | 7 ++++++- drivers/usb/host/xhci.c | 46 +++++++++++++++------------------------------- 2 files changed, 21 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index b55d46070a25..f71e8e307e0f 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -405,7 +405,12 @@ static int suspend_common(struct device *dev, bool do_wakeup) return retval; } - synchronize_irq(pci_dev->irq); + /* If MSI-X is enabled, the driver will have synchronized all vectors + * in pci_suspend(). If MSI or legacy PCI is enabled, that will be + * synchronized here. + */ + if (!hcd->msix_enabled) + synchronize_irq(pci_dev->irq); /* Downstream ports from this root hub should already be quiesced, so * there will be no DMA activity. Now we can shut down the upstream diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 45e4a3108cc3..d48edfa5043a 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -226,7 +226,8 @@ static int xhci_setup_msi(struct xhci_hcd *xhci) static int xhci_setup_msix(struct xhci_hcd *xhci) { int i, ret = 0; - struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); + struct usb_hcd *hcd = xhci_to_hcd(xhci); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); /* * calculate number of msi-x vectors supported. @@ -265,6 +266,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci) goto disable_msix; } + hcd->msix_enabled = 1; return ret; disable_msix: @@ -280,7 +282,8 @@ free_entries: /* Free any IRQs and disable MSI-X */ static void xhci_cleanup_msix(struct xhci_hcd *xhci) { - struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); + struct usb_hcd *hcd = xhci_to_hcd(xhci); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); xhci_free_irq(xhci); @@ -292,6 +295,7 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci) pci_disable_msi(pdev); } + hcd->msix_enabled = 0; return; } @@ -647,6 +651,7 @@ int xhci_suspend(struct xhci_hcd *xhci) int rc = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); u32 command; + int i; spin_lock_irq(&xhci->lock); clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); @@ -677,10 +682,15 @@ int xhci_suspend(struct xhci_hcd *xhci) spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; } - /* step 5: remove core well power */ - xhci_cleanup_msix(xhci); spin_unlock_irq(&xhci->lock); + /* step 5: remove core well power */ + /* synchronize irq when using MSI-X */ + if (xhci->msix_entries) { + for (i = 0; i < xhci->msix_count; i++) + synchronize_irq(xhci->msix_entries[i].vector); + } + return rc; } @@ -694,7 +704,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) { u32 command, temp = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); - struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int old_state, retval; old_state = hcd->state; @@ -729,9 +738,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) xhci_dbg(xhci, "Stop HCD\n"); xhci_halt(xhci); xhci_reset(xhci); - if (hibernated) - xhci_cleanup_msix(xhci); spin_unlock_irq(&xhci->lock); + xhci_cleanup_msix(xhci); #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING /* Tell the event ring poll function not to reschedule */ @@ -765,30 +773,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) return retval; } - spin_unlock_irq(&xhci->lock); - /* Re-setup MSI-X */ - if (hcd->irq) - free_irq(hcd->irq, hcd); - hcd->irq = -1; - - retval = xhci_setup_msix(xhci); - if (retval) - /* fall back to msi*/ - retval = xhci_setup_msi(xhci); - - if (retval) { - /* fall back to legacy interrupt*/ - retval = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, - hcd->irq_descr, hcd); - if (retval) { - xhci_err(xhci, "request interrupt %d failed\n", - pdev->irq); - return retval; - } - hcd->irq = pdev->irq; - } - - spin_lock_irq(&xhci->lock); /* step 4: set Run/Stop bit */ command = xhci_readl(xhci, &xhci->op_regs->command); command |= CMD_RUN; -- cgit v1.2.1 From 40a9fb17f32dbe54de3d636142a59288544deed7 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 17 Dec 2010 13:17:04 -0800 Subject: xhci: Do not run xhci_cleanup_msix with irq disabled when unloading xhci_hcd, I got: [ 134.856813] xhci_hcd 0000:02:00.0: remove, state 4 [ 134.858140] usb usb3: USB disconnect, address 1 [ 134.874956] xhci_hcd 0000:02:00.0: Host controller not halted, aborting reset. [ 134.876351] BUG: sleeping function called from invalid context at kernel/mutex.c:85 [ 134.877657] in_atomic(): 0, irqs_disabled(): 1, pid: 1451, name: modprobe [ 134.878975] Pid: 1451, comm: modprobe Not tainted 2.6.37-rc5+ #162 [ 134.880298] Call Trace: [ 134.881602] [] __might_sleep+0xeb/0xf0 [ 134.882921] [] mutex_lock+0x24/0x50 [ 134.884229] [] free_desc+0x2e/0x5f [ 134.885538] [] irq_free_descs+0x3b/0x71 [ 134.886853] [] free_irq_at+0x31/0x36 [ 134.888167] [] destroy_irq+0x69/0x71 [ 134.889486] [] native_teardown_msi_irq+0xe/0x10 [ 134.890820] [] default_teardown_msi_irqs+0x57/0x80 [ 134.892158] [] free_msi_irqs+0x8b/0xe9 [ 134.893504] [] pci_disable_msix+0x35/0x39 [ 134.894844] [] xhci_cleanup_msix+0x31/0x51 [xhci_hcd] [ 134.896186] [] xhci_stop+0x3a/0x80 [xhci_hcd] [ 134.897521] [] usb_remove_hcd+0xfd/0x14a [ 134.898859] [] usb_hcd_pci_remove+0x5c/0xc6 [ 134.900193] [] pci_device_remove+0x3f/0x91 [ 134.901535] [] __device_release_driver+0x83/0xd9 [ 134.902899] [] driver_detach+0x86/0xad [ 134.904222] [] bus_remove_driver+0xb2/0xd8 [ 134.905540] [] driver_unregister+0x6c/0x74 [ 134.906839] [] pci_unregister_driver+0x44/0x89 [ 134.908121] [] xhci_unregister_pci+0x15/0x17 [xhci_hcd] [ 134.909396] [] xhci_hcd_cleanup+0xe/0x10 [xhci_hcd] [ 134.910652] [] sys_delete_module+0x1ca/0x23b [ 134.911882] [] ? path_put+0x22/0x26 [ 134.913104] [] ? audit_syscall_entry+0x2c/0x148 [ 134.914333] [] system_call_fastpath+0x16/0x1b [ 134.915658] xhci_hcd 0000:02:00.0: USB bus 3 deregistered [ 134.916465] xhci_hcd 0000:02:00.0: PCI INT A disabled and the same issue when xhci_suspend is invoked. (Note from Sarah: That's fixed by Andiry's patch before this, by synchronizing the irqs rather than freeing them on suspend.) Do not run xhci_cleanup_msix with irq disabled. This patch should be queued for the 2.6.37 stable tree. Signed-off-by: Zhang Rui Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index d48edfa5043a..b2c56d15fb42 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -512,9 +512,10 @@ void xhci_stop(struct usb_hcd *hcd) spin_lock_irq(&xhci->lock); xhci_halt(xhci); xhci_reset(xhci); - xhci_cleanup_msix(xhci); spin_unlock_irq(&xhci->lock); + xhci_cleanup_msix(xhci); + #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING /* Tell the event ring poll function not to reschedule */ xhci->zombie = 1; @@ -548,9 +549,10 @@ void xhci_shutdown(struct usb_hcd *hcd) spin_lock_irq(&xhci->lock); xhci_halt(xhci); - xhci_cleanup_msix(xhci); spin_unlock_irq(&xhci->lock); + xhci_cleanup_msix(xhci); + xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n", xhci_readl(xhci, &xhci->op_regs->status)); } -- cgit v1.2.1 From 653a39d1f61bdc9f277766736d21d2e9be0391cb Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 23 Dec 2010 11:12:42 -0800 Subject: usb: Realloc xHCI structures after a hub is verified. When there's an xHCI host power loss after a suspend from memory, the USB core attempts to reset and verify the USB devices that are attached to the system. The xHCI driver has to reallocate those devices, since the hardware lost all knowledge of them during the power loss. When a hub is plugged in, and the host loses power, the xHCI hardware structures are not updated to say the device is a hub. This is usually done in hub_configure() when the USB hub is detected. That function is skipped during a reset and verify by the USB core, since the core restores the old configuration and alternate settings, and the hub driver has no idea this happened. This bug makes the xHCI host controller reject the enumeration of low speed devices under the resumed hub. Therefore, make the USB core re-setup the internal xHCI hub device information by calling update_hub_device() when hub_activate() is called for a hub reset resume. After a host power loss, all devices under the roothub get a reset-resume or a disconnect. This patch should be queued for the 2.6.37 stable tree. Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/core/hub.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b98efae6a1cf..4310cc4b1cb5 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -676,6 +676,8 @@ static void hub_init_func3(struct work_struct *ws); static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) { struct usb_device *hdev = hub->hdev; + struct usb_hcd *hcd; + int ret; int port1; int status; bool need_debounce_delay = false; @@ -714,6 +716,25 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) usb_autopm_get_interface_no_resume( to_usb_interface(hub->intfdev)); return; /* Continues at init2: below */ + } else if (type == HUB_RESET_RESUME) { + /* The internal host controller state for the hub device + * may be gone after a host power loss on system resume. + * Update the device's info so the HW knows it's a hub. + */ + hcd = bus_to_hcd(hdev->bus); + if (hcd->driver->update_hub_device) { + ret = hcd->driver->update_hub_device(hcd, hdev, + &hub->tt, GFP_NOIO); + if (ret < 0) { + dev_err(hub->intfdev, "Host not " + "accepting hub info " + "update.\n"); + dev_err(hub->intfdev, "LS/FS devices " + "and hubs may not work " + "under this hub\n."); + } + } + hub_power_on(hub, true); } else { hub_power_on(hub, true); } -- cgit v1.2.1 From a6d940dd759bf240d28624198660ed34582a327b Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 28 Dec 2010 13:08:42 -0800 Subject: xhci: Use GFP_NOIO during device reset. When xhci_discover_or_reset_device() is called after a host controller power loss, the virtual device may need to be reallocated. Make sure xhci_alloc_dev() uses GFP_NOIO. This avoid causing a deadlock by allowing the kernel to flush pending I/O while reallocating memory for a virtual device for a USB mass storage device that's holding the backing store for dirty memory buffers. This patch should be queued for the 2.6.37 stable tree. Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index b2c56d15fb42..34cf4e165877 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2431,8 +2431,12 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) xhci_err(xhci, "Error while assigning device slot ID\n"); return 0; } - /* xhci_alloc_virt_device() does not touch rings; no need to lock */ - if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_KERNEL)) { + /* xhci_alloc_virt_device() does not touch rings; no need to lock. + * Use GFP_NOIO, since this function can be called from + * xhci_discover_or_reset_device(), which may be called as part of + * mass storage driver error handling. + */ + if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) { /* Disable slot, if we can do it without mem alloc */ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n"); spin_lock_irqsave(&xhci->lock, flags); -- cgit v1.2.1 From 47cbf6925cd0ef8af4b8165b43a60b5f37c36d8a Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Mon, 20 Dec 2010 14:49:48 +0800 Subject: xHCI: fix queue_trb in isoc transfer Fix the more_trbs_coming field of queue_trb() in isoc transfer. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 62c70c230e83..55dc15675068 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2900,6 +2900,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, int running_total, trb_buff_len, td_len, td_remain_len, ret; u64 start_addr, addr; int i, j; + bool more_trbs_coming; ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; @@ -2965,9 +2966,11 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, */ if (j < trbs_per_td - 1) { field |= TRB_CHAIN; + more_trbs_coming = true; } else { td->last_trb = ep_ring->enqueue; field |= TRB_IOC; + more_trbs_coming = false; } /* Calculate TRB length */ @@ -2980,7 +2983,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, length_field = TRB_LEN(trb_buff_len) | remainder | TRB_INTR_TARGET(0); - queue_trb(xhci, ep_ring, false, false, + queue_trb(xhci, ep_ring, false, more_trbs_coming, lower_32_bits(addr), upper_32_bits(addr), length_field, -- cgit v1.2.1 From e1eab2e00015bfe48388920ff287efdbefb6af24 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Tue, 4 Jan 2011 16:30:39 -0800 Subject: xHCI: remove redundant parameter in giveback_first_trb() Parameter *td is not used in giveback_first_trb(). Remove it. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 55dc15675068..59f81b560483 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2414,7 +2414,7 @@ static void check_trb_math(struct urb *urb, int num_trbs, int running_total) static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id, unsigned int ep_index, unsigned int stream_id, int start_cycle, - struct xhci_generic_trb *start_trb, struct xhci_td *td) + struct xhci_generic_trb *start_trb) { /* * Pass all the TRBs to the hardware at once and make sure this write @@ -2625,7 +2625,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, check_trb_math(urb, num_trbs, running_total); giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, - start_cycle, start_trb, td); + start_cycle, start_trb); return 0; } @@ -2757,7 +2757,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, check_trb_math(urb, num_trbs, running_total); giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, - start_cycle, start_trb, td); + start_cycle, start_trb); return 0; } @@ -2859,7 +2859,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state); giveback_first_trb(xhci, slot_id, ep_index, 0, - start_cycle, start_trb, td); + start_cycle, start_trb); return 0; } @@ -3006,10 +3006,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } } - wmb(); - start_trb->field[3] |= start_cycle; - - xhci_ring_ep_doorbell(xhci, slot_id, ep_index, urb->stream_id); + giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, + start_cycle, start_trb); return 0; } -- cgit v1.2.1 From 50f7b52a83a893929edf87a89ebc081ff26a7b91 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Mon, 20 Dec 2010 15:09:34 +0800 Subject: xHCI: fix cycle bit set in giveback_first_trb() giveback_first_trb() controls the cycle bit set of the start_trb, to ensure that the start_trb is written last and the host controller will receive a whole td at a time. However, if the ring is wrapped and cycle bit is toggled to zero, then giveback_first_trb() will be of no effect. In this case, set the cycle bit of start_trb to 1 at the beginning and clear it in giveback_first_trb(). Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 59f81b560483..1ee6de92193a 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2421,7 +2421,10 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id, * isn't reordered. */ wmb(); - start_trb->field[3] |= start_cycle; + if (start_cycle) + start_trb->field[3] |= start_cycle; + else + start_trb->field[3] &= ~0x1; xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id); } @@ -2551,9 +2554,11 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, u32 remainder = 0; /* Don't change the cycle bit of the first TRB until later */ - if (first_trb) + if (first_trb) { first_trb = false; - else + if (start_cycle == 0) + field |= 0x1; + } else field |= ep_ring->cycle_state; /* Chain all the TRBs together; clear the chain bit in the last @@ -2711,9 +2716,11 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field = 0; /* Don't change the cycle bit of the first TRB until later */ - if (first_trb) + if (first_trb) { first_trb = false; - else + if (start_cycle == 0) + field |= 0x1; + } else field |= ep_ring->cycle_state; /* Chain all the TRBs together; clear the chain bit in the last @@ -2818,13 +2825,17 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* Queue setup TRB - see section 6.4.1.2.1 */ /* FIXME better way to translate setup_packet into two u32 fields? */ setup = (struct usb_ctrlrequest *) urb->setup_packet; + field = 0; + field |= TRB_IDT | TRB_TYPE(TRB_SETUP); + if (start_cycle == 0) + field |= 0x1; queue_trb(xhci, ep_ring, false, true, /* FIXME endianness is probably going to bite my ass here. */ setup->bRequestType | setup->bRequest << 8 | setup->wValue << 16, setup->wIndex | setup->wLength << 16, TRB_LEN(8) | TRB_INTR_TARGET(0), /* Immediate data in pointer */ - TRB_IDT | TRB_TYPE(TRB_SETUP)); + field); /* If there's data, queue data TRBs */ field = 0; @@ -2951,7 +2962,10 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, field |= TRB_TYPE(TRB_ISOC); /* Assume URB_ISO_ASAP is set */ field |= TRB_SIA; - if (i > 0) + if (i == 0) { + if (start_cycle == 0) + field |= 0x1; + } else field |= ep_ring->cycle_state; first_trb = false; } else { -- cgit v1.2.1 From f2c565e223af39ed38be5c84b1a37b591b22db83 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Mon, 20 Dec 2010 17:12:24 +0800 Subject: xHCI: replace dev_dbg() with xhci_dbg() dev_dbg() is used to print ordinary transfer messages in xhci-ring.c. System log messages will be flushed if CONFIG_USB_DEBUG is set. Replace the dev_dbg() with xhci_dbg(). Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 1ee6de92193a..e38f7ece0a67 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1710,8 +1710,7 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td, /* Others already handled above */ break; } - dev_dbg(&td->urb->dev->dev, - "ep %#x - asked for %d bytes, " + xhci_dbg(xhci, "ep %#x - asked for %d bytes, " "%d bytes untransferred\n", td->urb->ep->desc.bEndpointAddress, td->urb->transfer_buffer_length, @@ -2389,7 +2388,8 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb) } xhci_dbg(xhci, "\n"); if (!in_interrupt()) - dev_dbg(&urb->dev->dev, "ep %#x - urb len = %d, sglist used, num_trbs = %d\n", + xhci_dbg(xhci, "ep %#x - urb len = %d, sglist used, " + "num_trbs = %d\n", urb->ep->desc.bEndpointAddress, urb->transfer_buffer_length, num_trbs); @@ -2676,7 +2676,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */ if (!in_interrupt()) - dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d), addr = %#llx, num_trbs = %d\n", + xhci_dbg(xhci, "ep %#x - urb len = %#x (%d), " + "addr = %#llx, num_trbs = %d\n", urb->ep->desc.bEndpointAddress, urb->transfer_buffer_length, urb->transfer_buffer_length, @@ -2922,7 +2923,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, } if (!in_interrupt()) - dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d)," + xhci_dbg(xhci, "ep %#x - urb len = %#x (%d)," " addr = %#llx, num_tds = %d\n", urb->ep->desc.bEndpointAddress, urb->transfer_buffer_length, -- cgit v1.2.1 From 7961acd7327fe48e55abef277630abdbb3f2081a Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Mon, 20 Dec 2010 17:14:20 +0800 Subject: xHCI: fix printk_ratelimit() usage printk_ratelimit() is misused in xhci-ring.c. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index e38f7ece0a67..2116c0f64952 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2452,7 +2452,7 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, * to set the polling interval (once the API is added). */ if (xhci_interval != ep_interval) { - if (!printk_ratelimit()) + if (printk_ratelimit()) dev_dbg(&urb->dev->dev, "Driver uses different interval" " (%d microframe%s) than xHCI " "(%d microframe%s)\n", @@ -3080,7 +3080,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, * to set the polling interval (once the API is added). */ if (xhci_interval != ep_interval) { - if (!printk_ratelimit()) + if (printk_ratelimit()) dev_dbg(&urb->dev->dev, "Driver uses different interval" " (%d microframe%s) than xHCI " "(%d microframe%s)\n", -- cgit v1.2.1 From 50d64676d132a8a72a1a1657d7b3e6efa53da1ac Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Wed, 15 Dec 2010 14:18:11 -0500 Subject: xhci: Remove more doorbell-related reads The unused space in the doorbell is now marked as RsvdZ, not RsvdP, so we can avoid reading the doorbell before writing it. Update the doorbell-related defines to produce the entire doorbell value from a single macro. Document the doorbell format in a comment. Signed-off-by: Matthew Wilcox Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 27 +++++++++++---------------- drivers/usb/host/xhci.h | 16 ++++++---------- 2 files changed, 17 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 2116c0f64952..3e8211c1ce5a 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -308,11 +308,8 @@ static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, /* Ring the host controller doorbell after placing a command on the ring */ void xhci_ring_cmd_db(struct xhci_hcd *xhci) { - u32 temp; - xhci_dbg(xhci, "// Ding dong!\n"); - temp = xhci_readl(xhci, &xhci->dba->doorbell[0]) & DB_MASK; - xhci_writel(xhci, temp | DB_TARGET_HOST, &xhci->dba->doorbell[0]); + xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]); /* Flush PCI posted writes */ xhci_readl(xhci, &xhci->dba->doorbell[0]); } @@ -322,26 +319,24 @@ void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int ep_index, unsigned int stream_id) { - struct xhci_virt_ep *ep; - unsigned int ep_state; - u32 field; __u32 __iomem *db_addr = &xhci->dba->doorbell[slot_id]; + struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index]; + unsigned int ep_state = ep->ep_state; - ep = &xhci->devs[slot_id]->eps[ep_index]; - ep_state = ep->ep_state; /* Don't ring the doorbell for this endpoint if there are pending - * cancellations because the we don't want to interrupt processing. + * cancellations because we don't want to interrupt processing. * We don't want to restart any stream rings if there's a set dequeue * pointer command pending because the device can choose to start any * stream once the endpoint is on the HW schedule. * FIXME - check all the stream rings for pending cancellations. */ - if (!(ep_state & EP_HALT_PENDING) && !(ep_state & SET_DEQ_PENDING) - && !(ep_state & EP_HALTED)) { - field = xhci_readl(xhci, db_addr) & DB_MASK; - field |= EPI_TO_DB(ep_index) | STREAM_ID_TO_DB(stream_id); - xhci_writel(xhci, field, db_addr); - } + if ((ep_state & EP_HALT_PENDING) || (ep_state & SET_DEQ_PENDING) || + (ep_state & EP_HALTED)) + return; + xhci_writel(xhci, DB_VALUE(ep_index, stream_id), db_addr); + /* The CPU has better things to do at this point than wait for a + * write-posting flush. It'll get there soon enough. + */ } /* Ring the doorbell for any rings with pending URBs */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 170c367112d2..7f236fd22015 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -436,22 +436,18 @@ struct xhci_run_regs { /** * struct doorbell_array * + * Bits 0 - 7: Endpoint target + * Bits 8 - 15: RsvdZ + * Bits 16 - 31: Stream ID + * * Section 5.6 */ struct xhci_doorbell_array { u32 doorbell[256]; }; -#define DB_TARGET_MASK 0xFFFFFF00 -#define DB_STREAM_ID_MASK 0x0000FFFF -#define DB_TARGET_HOST 0x0 -#define DB_STREAM_ID_HOST 0x0 -#define DB_MASK (0xff << 8) - -/* Endpoint Target - bits 0:7 */ -#define EPI_TO_DB(p) (((p) + 1) & 0xff) -#define STREAM_ID_TO_DB(p) (((p) & 0xffff) << 16) - +#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16)) +#define DB_VALUE_HOST 0x00000000 /** * struct xhci_protocol_caps -- cgit v1.2.1 From 3632ef8909118db9584e1bed9538dc180adb32f8 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sat, 15 Jan 2011 09:27:00 +1000 Subject: Revert "drm: Update fbdev fb_fix_screeninfo" This reverts commit dfe63bb0ad9810db13aab0058caba97866e0a681. This commit was causing nouveau not to work properly, for -rc1 I'd prefer it worked and we can look if this is useful for 2.6.39. Cc: James Simmons Signed-off-by: Dave Airlie Signed-off-by: Linus Torvalds --- drivers/gpu/drm/drm_fb_helper.c | 41 ++++++++++++++++----------------- drivers/gpu/drm/i915/intel_fb.c | 1 + drivers/gpu/drm/nouveau/nouveau_fbcon.c | 1 + drivers/gpu/drm/radeon/radeon_fb.c | 2 ++ 4 files changed, 24 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 0307d601f5e5..5c4f9b9ecdc0 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -607,25 +607,6 @@ void drm_fb_helper_fini(struct drm_fb_helper *fb_helper) } EXPORT_SYMBOL(drm_fb_helper_fini); -void drm_fb_helper_fill_fix(struct fb_info *info, struct drm_framebuffer *fb) -{ - info->fix.type = FB_TYPE_PACKED_PIXELS; - info->fix.visual = fb->depth == 8 ? FB_VISUAL_PSEUDOCOLOR : - FB_VISUAL_TRUECOLOR; - info->fix.mmio_start = 0; - info->fix.mmio_len = 0; - info->fix.type_aux = 0; - info->fix.xpanstep = 1; /* doing it in hw */ - info->fix.ypanstep = 1; /* doing it in hw */ - info->fix.ywrapstep = 0; - info->fix.accel = FB_ACCEL_NONE; - info->fix.type_aux = 0; - - info->fix.line_length = fb->pitch; - return; -} -EXPORT_SYMBOL(drm_fb_helper_fill_fix); - static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green, u16 blue, u16 regno, struct fb_info *info) { @@ -835,7 +816,6 @@ int drm_fb_helper_set_par(struct fb_info *info) mutex_unlock(&dev->mode_config.mutex); return ret; } - drm_fb_helper_fill_fix(info, fb_helper->fb); } mutex_unlock(&dev->mode_config.mutex); @@ -973,7 +953,6 @@ int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper, if (new_fb) { info->var.pixclock = 0; - drm_fb_helper_fill_fix(info, fb_helper->fb); if (register_framebuffer(info) < 0) { return -EINVAL; } @@ -1000,6 +979,26 @@ int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper, } EXPORT_SYMBOL(drm_fb_helper_single_fb_probe); +void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch, + uint32_t depth) +{ + info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.visual = depth == 8 ? FB_VISUAL_PSEUDOCOLOR : + FB_VISUAL_TRUECOLOR; + info->fix.mmio_start = 0; + info->fix.mmio_len = 0; + info->fix.type_aux = 0; + info->fix.xpanstep = 1; /* doing it in hw */ + info->fix.ypanstep = 1; /* doing it in hw */ + info->fix.ywrapstep = 0; + info->fix.accel = FB_ACCEL_NONE; + info->fix.type_aux = 0; + + info->fix.line_length = pitch; + return; +} +EXPORT_SYMBOL(drm_fb_helper_fill_fix); + void drm_fb_helper_fill_var(struct fb_info *info, struct drm_fb_helper *fb_helper, uint32_t fb_width, uint32_t fb_height) { diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index ee145a257287..512782728e51 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -148,6 +148,7 @@ static int intelfb_create(struct intel_fbdev *ifbdev, // memset(info->screen_base, 0, size); + drm_fb_helper_fill_fix(info, fb->pitch, fb->depth); drm_fb_helper_fill_var(info, &ifbdev->helper, sizes->fb_width, sizes->fb_height); info->pixmap.size = 64*1024; diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index a26d04740c88..6d56a54b6e2e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -359,6 +359,7 @@ nouveau_fbcon_create(struct nouveau_fbdev *nfbdev, info->screen_base = nvbo_kmap_obj_iovirtual(nouveau_fb->nvbo); info->screen_size = size; + drm_fb_helper_fill_fix(info, fb->pitch, fb->depth); drm_fb_helper_fill_var(info, &nfbdev->helper, sizes->fb_width, sizes->fb_height); /* Set aperture base/size for vesafb takeover */ diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index ca32e9c1e91d..66324b5bb5ba 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -225,6 +225,8 @@ static int radeonfb_create(struct radeon_fbdev *rfbdev, strcpy(info->fix.id, "radeondrmfb"); + drm_fb_helper_fill_fix(info, fb->pitch, fb->depth); + info->flags = FBINFO_DEFAULT | FBINFO_CAN_FORCE_OUTPUT; info->fbops = &radeonfb_ops; -- cgit v1.2.1 From 2cdf2455a660ea860272ef3f833f0e5c4cc80205 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Wed, 5 Jan 2011 17:43:52 +0900 Subject: pch_dma: support new device ML7213 IOH Support new device OKI SEMICONDUCTOR's ML7213 IOH(Input/Output Hub) which is for IVI(In-Vehicle Infotainment) use. The ML7213 is companion chip for Intel Atom E6xx series. The ML7213 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA Signed-off-by: Dan Williams --- drivers/dma/Kconfig | 9 +++++++-- drivers/dma/pch_dma.c | 19 ++++++++++++++----- 2 files changed, 21 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 6ee23592700a..1b61d3aa2962 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -200,11 +200,16 @@ config PL330_DMA platform_data for a dma-pl330 device. config PCH_DMA - tristate "Topcliff (Intel EG20T) PCH DMA support" + tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7213 IOH DMA support" depends on PCI && X86 select DMA_ENGINE help - Enable support for the Topcliff (Intel EG20T) PCH DMA engine. + Enable support for Intel EG20T PCH DMA engine. + + This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/ + Output Hub) which is for IVI(In-Vehicle Infotainment) use. + ML7213 is companion chip for Intel Atom E6xx series. + ML7213 is completely compatible for Intel EG20T PCH. config IMX_SDMA tristate "i.MX SDMA support" diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index c064c89420d0..1c38418ae61f 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -1,6 +1,7 @@ /* * Topcliff PCH DMA controller driver * Copyright (c) 2010 Intel Corporation + * Copyright (C) 2011 OKI SEMICONDUCTOR CO., LTD. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -921,12 +922,19 @@ static void __devexit pch_dma_remove(struct pci_dev *pdev) } /* PCI Device ID of DMA device */ -#define PCI_DEVICE_ID_PCH_DMA_8CH 0x8810 -#define PCI_DEVICE_ID_PCH_DMA_4CH 0x8815 +#define PCI_VENDOR_ID_ROHM 0x10DB +#define PCI_DEVICE_ID_EG20T_PCH_DMA_8CH 0x8810 +#define PCI_DEVICE_ID_EG20T_PCH_DMA_4CH 0x8815 +#define PCI_DEVICE_ID_ML7213_DMA1_8CH 0x8026 +#define PCI_DEVICE_ID_ML7213_DMA2_8CH 0x802B +#define PCI_DEVICE_ID_ML7213_DMA3_4CH 0x8034 static const struct pci_device_id pch_dma_id_table[] = { - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_DMA_8CH), 8 }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_DMA_4CH), 4 }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_8CH), 8 }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_4CH), 4 }, + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA1_8CH), 8}, /* UART Video */ + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA2_8CH), 8}, /* PCMIF SPI */ + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA3_4CH), 4}, /* FPGA */ { 0, }, }; @@ -954,6 +962,7 @@ static void __exit pch_dma_exit(void) module_init(pch_dma_init); module_exit(pch_dma_exit); -MODULE_DESCRIPTION("Topcliff PCH DMA controller driver"); +MODULE_DESCRIPTION("Intel EG20T PCH / OKI SEMICONDUCTOR ML7213 IOH " + "DMA controller driver"); MODULE_AUTHOR("Yong Wang "); MODULE_LICENSE("GPL v2"); -- cgit v1.2.1 From 0f70e8cea3ac6a765289811c590a16934bf47711 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 15 Dec 2010 18:50:16 +0100 Subject: dmaengine: at_hdmac: use dma_address to program DMA hardware In atc_prep_slave_sg() function we use dma_address field of scatterlist with sg_dma_address() macro instead of sg_phys(). DMA address is already computed by dma_map_sg() or another mapping function in calling driver. Signed-off-by: Nicolas Ferre Signed-off-by: Dan Williams --- drivers/dma/at_hdmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index a0f3e6a06e06..6eea8883ecf3 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -670,7 +670,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, if (!desc) goto err_desc_get; - mem = sg_phys(sg); + mem = sg_dma_address(sg); len = sg_dma_len(sg); mem_width = 2; if (unlikely(mem & 3 || len & 3)) @@ -712,7 +712,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, if (!desc) goto err_desc_get; - mem = sg_phys(sg); + mem = sg_dma_address(sg); len = sg_dma_len(sg); mem_width = 2; if (unlikely(mem & 3 || len & 3)) -- cgit v1.2.1 From ebcf9b80f9657f44fcb60ee17abe14eadebf3386 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 12 Jan 2011 15:39:06 +0100 Subject: dmaengine: at_hdmac: trivial add precision to unmapping comment Signed-off-by: Nicolas Ferre Signed-off-by: Dan Williams --- drivers/dma/at_hdmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 6eea8883ecf3..73a470b4809b 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -253,7 +253,7 @@ atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc) /* move myself to free_list */ list_move(&desc->desc_node, &atchan->free_list); - /* unmap dma addresses */ + /* unmap dma addresses (not on slave channels) */ if (!atchan->chan_common.private) { struct device *parent = chan2parent(&atchan->chan_common); if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) { -- cgit v1.2.1 From 58344f25cf5f3453bfcf4b845ea9ec71153e45c3 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 12 Jan 2011 15:39:07 +0100 Subject: dmaengine: at_hdmac: no need set ACK in new descriptor Following descriptor flow in at_hdmac driver, descriptor comming from atc_desc_get() as already DMA_CTRL_ACK flag set. No need to set it again. Signed-off-by: Nicolas Ferre Signed-off-by: Dan Williams --- drivers/dma/at_hdmac.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 73a470b4809b..c6ddd6ffb8f3 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -583,7 +583,6 @@ atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, desc->lli.ctrlb = ctrlb; desc->txd.cookie = 0; - async_tx_ack(&desc->txd); if (!first) { first = desc; -- cgit v1.2.1 From 93d0bec2be4b0f036a27da207ecab97fc3d3bbbe Mon Sep 17 00:00:00 2001 From: Eric Xu Date: Wed, 12 Jan 2011 15:39:08 +0100 Subject: dmaengine: at_hdmac: use subsys_initcall instead of module_init Use subsys_initcall instead of module_init in order to keep DMA engine rolling before other peripheral drivers. Signed-off-by: Eric Xu Signed-off-by: Nicolas Ferre Signed-off-by: Dan Williams --- drivers/dma/at_hdmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index c6ddd6ffb8f3..e25c4ad01062 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -1209,7 +1209,7 @@ static int __init at_dma_init(void) { return platform_driver_probe(&at_dma_driver, at_dma_probe); } -module_init(at_dma_init); +subsys_initcall(at_dma_init); static void __exit at_dma_exit(void) { -- cgit v1.2.1 From 568f7f0c2e597671d3e646e0b85c95c4a5756fef Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 12 Jan 2011 15:39:09 +0100 Subject: dmaengine: at_hdmac: flags located in first descriptor Place flags on first descriptor of chain instead of last. This is the one used by atc_chain_complete() function while unmapping. Signed-off-by: Nicolas Ferre Signed-off-by: Dan Williams --- drivers/dma/at_hdmac.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index e25c4ad01062..3938db210834 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -603,7 +603,7 @@ atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, /* set end-of-link to the last link descriptor of list*/ set_desc_eol(desc); - desc->txd.flags = flags; /* client is in control of this ack */ + first->txd.flags = flags; /* client is in control of this ack */ return &first->txd; @@ -748,8 +748,8 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, first->txd.cookie = -EBUSY; first->len = total_len; - /* last link descriptor of list is responsible of flags */ - prev->txd.flags = flags; /* client is in control of this ack */ + /* first link descriptor of list is responsible of flags */ + first->txd.flags = flags; /* client is in control of this ack */ return &first->txd; -- cgit v1.2.1 From dda36f9821321edf65d69da5c0807df7e73d26fc Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 12 Jan 2011 15:39:10 +0100 Subject: dmaengine: at_hdmac: fix race while monitoring channel status We were reading channel status then taking a lock. This lead to a race because this lock may delay us and then make this channel not idle anymore. Signed-off-by: Nicolas Ferre Signed-off-by: Dan Williams --- drivers/dma/at_hdmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 3938db210834..40f2bf4ae474 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -853,11 +853,11 @@ static void atc_issue_pending(struct dma_chan *chan) dev_vdbg(chan2dev(chan), "issue_pending\n"); + spin_lock_bh(&atchan->lock); if (!atc_chan_is_enabled(atchan)) { - spin_lock_bh(&atchan->lock); atc_advance_work(atchan); - spin_unlock_bh(&atchan->lock); } + spin_unlock_bh(&atchan->lock); } /** -- cgit v1.2.1 From 0261f7416362f6affc2d4fe7fea9320a6bdaaee6 Mon Sep 17 00:00:00 2001 From: Wei Yongquan Date: Wed, 29 Dec 2010 20:30:55 +0800 Subject: Update CONFIG_MD_RAID6_PQ to CONFIG_RAID6_PQ in drivers/dma/iop-adma.c Commit f5e70d0fe3ea990cfb3fc8d7f76a719adcb1e0b5 renamed MD_RAID6_PQ to RAID6_PQ, but iop-adma.c didn't update synchronously. Signed-off-by: Wei Yongquan Signed-off-by: Dan Williams --- drivers/dma/iop-adma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index 161c452923b8..c6b01f535b29 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -1261,7 +1261,7 @@ out: return err; } -#ifdef CONFIG_MD_RAID6_PQ +#ifdef CONFIG_RAID6_PQ static int __devinit iop_adma_pq_zero_sum_self_test(struct iop_adma_device *device) { @@ -1584,7 +1584,7 @@ static int __devinit iop_adma_probe(struct platform_device *pdev) if (dma_has_cap(DMA_PQ, dma_dev->cap_mask) && dma_has_cap(DMA_PQ_VAL, dma_dev->cap_mask)) { - #ifdef CONFIG_MD_RAID6_PQ + #ifdef CONFIG_RAID6_PQ ret = iop_adma_pq_zero_sum_self_test(adev); dev_dbg(&pdev->dev, "pq self test returned %d\n", ret); #else -- cgit v1.2.1 From cc53ce53c86924bfe98a12ea20b7465038a08792 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 14 Jan 2011 18:45:26 +0000 Subject: Add a dentry op to allow processes to be held during pathwalk transit Add a dentry op (d_manage) to permit a filesystem to hold a process and make it sleep when it tries to transit away from one of that filesystem's directories during a pathwalk. The operation is keyed off a new dentry flag (DCACHE_MANAGE_TRANSIT). The filesystem is allowed to be selective about which processes it holds and which it permits to continue on or prohibits from transiting from each flagged directory. This will allow autofs to hold up client processes whilst letting its userspace daemon through to maintain the directory or the stuff behind it or mounted upon it. The ->d_manage() dentry operation: int (*d_manage)(struct path *path, bool mounting_here); takes a pointer to the directory about to be transited away from and a flag indicating whether the transit is undertaken by do_add_mount() or do_move_mount() skipping through a pile of filesystems mounted on a mountpoint. It should return 0 if successful and to let the process continue on its way; -EISDIR to prohibit the caller from skipping to overmounted filesystems or automounting, and to use this directory; or some other error code to return to the user. ->d_manage() is called with namespace_sem writelocked if mounting_here is true and no other locks held, so it may sleep. However, if mounting_here is true, it may not initiate or wait for a mount or unmount upon the parameter directory, even if the act is actually performed by userspace. Within fs/namei.c, follow_managed() is extended to check with d_manage() first on each managed directory, before transiting away from it or attempting to automount upon it. follow_down() is renamed follow_down_one() and should only be used where the filesystem deliberately intends to avoid management steps (e.g. autofs). A new follow_down() is added that incorporates the loop done by all other callers of follow_down() (do_add/move_mount(), autofs and NFSD; whilst AFS, NFS and CIFS do use it, their use is removed by converting them to use d_automount()). The new follow_down() calls d_manage() as appropriate. It also takes an extra parameter to indicate if it is being called from mount code (with namespace_sem writelocked) which it passes to d_manage(). follow_down() ignores automount points so that it can be used to mount on them. __follow_mount_rcu() is made to abort rcu-walk mode if it hits a directory with DCACHE_MANAGE_TRANSIT set on the basis that we're probably going to have to sleep. It would be possible to enter d_manage() in rcu-walk mode too, and have that determine whether to abort or not itself. That would allow the autofs daemon to continue on in rcu-walk mode. Note that DCACHE_MANAGE_TRANSIT on a directory should be cleared when it isn't required as every tranist from that directory will cause d_manage() to be invoked. It can always be set again when necessary. ========================== WHAT THIS MEANS FOR AUTOFS ========================== Autofs currently uses the lookup() inode op and the d_revalidate() dentry op to trigger the automounting of indirect mounts, and both of these can be called with i_mutex held. autofs knows that the i_mutex will be held by the caller in lookup(), and so can drop it before invoking the daemon - but this isn't so for d_revalidate(), since the lock is only held on _some_ of the code paths that call it. This means that autofs can't risk dropping i_mutex from its d_revalidate() function before it calls the daemon. The bug could manifest itself as, for example, a process that's trying to validate an automount dentry that gets made to wait because that dentry is expired and needs cleaning up: mkdir S ffffffff8014e05a 0 32580 24956 Call Trace: [] :autofs4:autofs4_wait+0x674/0x897 [] avc_has_perm+0x46/0x58 [] autoremove_wake_function+0x0/0x2e [] :autofs4:autofs4_expire_wait+0x41/0x6b [] :autofs4:autofs4_revalidate+0x91/0x149 [] __lookup_hash+0xa0/0x12f [] lookup_create+0x46/0x80 [] sys_mkdirat+0x56/0xe4 versus the automount daemon which wants to remove that dentry, but can't because the normal process is holding the i_mutex lock: automount D ffffffff8014e05a 0 32581 1 32561 Call Trace: [] __mutex_lock_slowpath+0x60/0x9b [] do_path_lookup+0x2ca/0x2f1 [] .text.lock.mutex+0xf/0x14 [] do_rmdir+0x77/0xde [] tracesys+0x71/0xe0 [] tracesys+0xd5/0xe0 which means that the system is deadlocked. This patch allows autofs to hold up normal processes whilst the daemon goes ahead and does things to the dentry tree behind the automouter point without risking a deadlock as almost no locks are held in d_manage() and none in d_automount(). Signed-off-by: David Howells Was-Acked-by: Ian Kent Signed-off-by: Al Viro --- drivers/staging/autofs/dirhash.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/autofs/dirhash.c b/drivers/staging/autofs/dirhash.c index d3f42c8325f7..a08bd7355035 100644 --- a/drivers/staging/autofs/dirhash.c +++ b/drivers/staging/autofs/dirhash.c @@ -88,14 +88,13 @@ struct autofs_dir_ent *autofs_expire(struct super_block *sb, } path.mnt = mnt; path_get(&path); - if (!follow_down(&path)) { + if (!follow_down_one(&path)) { path_put(&path); DPRINTK(("autofs: not expirable\ (not a mounted directory): %s\n", ent->name)); continue; } - while (d_mountpoint(path.dentry) && follow_down(&path)) - ; + follow_down(&path, false); // TODO: need to check error umount_ok = may_umount(path.mnt); path_put(&path); -- cgit v1.2.1 From 394234406c7a8a6b947d230b115c918c0a1def68 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Wed, 12 Jan 2011 20:42:24 +0000 Subject: qeth: postpone open till recovery is finished The open function of qeth is not executed if the qeth device is in state DOWN or HARDSETUP. A recovery switches from state SOFTSETUP to HARDSETUP to DOWN to HARDSETUP and back to SOFTSETUP. If open and recover are running concurrently, open fails if it hits the states HARDSETUP or DOWN. This patch inserts waiting for recovery finish in the qeth open functions to enable successful qeth device opening in spite of a running recovery. Signed-off-by: Ursula Braun Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l2_main.c | 18 ++++++++++++++++-- drivers/s390/net/qeth_l3_main.c | 18 ++++++++++++++++-- 2 files changed, 32 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 7a7a1b664781..2ac8f6aff5a4 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -831,12 +831,14 @@ tx_drop: return NETDEV_TX_OK; } -static int qeth_l2_open(struct net_device *dev) +static int __qeth_l2_open(struct net_device *dev) { struct qeth_card *card = dev->ml_priv; int rc = 0; QETH_CARD_TEXT(card, 4, "qethopen"); + if (card->state == CARD_STATE_UP) + return rc; if (card->state != CARD_STATE_SOFTSETUP) return -ENODEV; @@ -857,6 +859,18 @@ static int qeth_l2_open(struct net_device *dev) return rc; } +static int qeth_l2_open(struct net_device *dev) +{ + struct qeth_card *card = dev->ml_priv; + + QETH_CARD_TEXT(card, 5, "qethope_"); + if (qeth_wait_for_threads(card, QETH_RECOVER_THREAD)) { + QETH_CARD_TEXT(card, 3, "openREC"); + return -ERESTARTSYS; + } + return __qeth_l2_open(dev); +} + static int qeth_l2_stop(struct net_device *dev) { struct qeth_card *card = dev->ml_priv; @@ -1046,7 +1060,7 @@ contin: if (recover_flag == CARD_STATE_RECOVER) { if (recovery_mode && card->info.type != QETH_CARD_TYPE_OSN) { - qeth_l2_open(card->dev); + __qeth_l2_open(card->dev); } else { rtnl_lock(); dev_open(card->dev); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index e227e465bfc4..988255b443e4 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3240,12 +3240,14 @@ tx_drop: return NETDEV_TX_OK; } -static int qeth_l3_open(struct net_device *dev) +static int __qeth_l3_open(struct net_device *dev) { struct qeth_card *card = dev->ml_priv; int rc = 0; QETH_CARD_TEXT(card, 4, "qethopen"); + if (card->state == CARD_STATE_UP) + return rc; if (card->state != CARD_STATE_SOFTSETUP) return -ENODEV; card->data.state = CH_STATE_UP; @@ -3260,6 +3262,18 @@ static int qeth_l3_open(struct net_device *dev) return rc; } +static int qeth_l3_open(struct net_device *dev) +{ + struct qeth_card *card = dev->ml_priv; + + QETH_CARD_TEXT(card, 5, "qethope_"); + if (qeth_wait_for_threads(card, QETH_RECOVER_THREAD)) { + QETH_CARD_TEXT(card, 3, "openREC"); + return -ERESTARTSYS; + } + return __qeth_l3_open(dev); +} + static int qeth_l3_stop(struct net_device *dev) { struct qeth_card *card = dev->ml_priv; @@ -3564,7 +3578,7 @@ contin: netif_carrier_off(card->dev); if (recover_flag == CARD_STATE_RECOVER) { if (recovery_mode) - qeth_l3_open(card->dev); + __qeth_l3_open(card->dev); else { rtnl_lock(); dev_open(card->dev); -- cgit v1.2.1 From 16c0f9362433a76f01d174bb8b9c87b9a96198ee Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Wed, 12 Jan 2011 20:42:25 +0000 Subject: qeth: l3 hw tx csum circumvent hw bug Some OSA level have a bug in the hw tx csum logic. We can circumvent this bug by turning on IP hw csum also. Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l3_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 988255b443e4..d09b0c44fc3d 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2998,7 +2998,9 @@ static inline void qeth_l3_hdr_csum(struct qeth_card *card, */ if (iph->protocol == IPPROTO_UDP) hdr->hdr.l3.ext_flags |= QETH_HDR_EXT_UDP; - hdr->hdr.l3.ext_flags |= QETH_HDR_EXT_CSUM_TRANSP_REQ; + hdr->hdr.l3.ext_flags |= QETH_HDR_EXT_CSUM_TRANSP_REQ | + QETH_HDR_EXT_CSUM_HDR_REQ; + iph->check = 0; if (card->options.performance_stats) card->perf_stats.tx_csum++; } -- cgit v1.2.1 From 672c54466d24994eb9633f993862c89539504a42 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 13 Jan 2011 15:36:09 -0700 Subject: dt/flattree: Return virtual address from early_init_dt_alloc_memory_arch() The physical address is never used by the device tree code when allocating memory for unflattening. Change the architecture's alloc hook to return the virutal address instead. Signed-off-by: Grant Likely --- drivers/of/fdt.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index c787c3d95c60..af824e7e0367 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -692,12 +692,6 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, return 1; } -static void *__init early_device_tree_alloc(u64 size, u64 align) -{ - unsigned long mem = early_init_dt_alloc_memory_arch(size, align); - return __va(mem); -} - /** * unflatten_device_tree - create tree of device_nodes from flat blob * @@ -709,7 +703,7 @@ static void *__init early_device_tree_alloc(u64 size, u64 align) void __init unflatten_device_tree(void) { __unflatten_device_tree(initial_boot_params, &allnodes, - early_device_tree_alloc); + early_init_dt_alloc_memory_arch); /* Get pointer to OF "/chosen" node for use everywhere */ of_chosen = of_find_node_by_path("/chosen"); -- cgit v1.2.1 From a53255d38e6d08453373ac0b7256d40395b202ba Mon Sep 17 00:00:00 2001 From: Shreyas Bhatewara Date: Fri, 14 Jan 2011 14:59:25 +0000 Subject: vmxnet3: fix ring size update Fix a bug while changing ring size when MTU is changed. Signed-off-by: Shreyas N Bhatewara Acked-by: Dmitry Torokhov Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index d143e8b72b5b..562bdbb01507 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -2426,7 +2426,7 @@ vmxnet3_adjust_rx_ring_size(struct vmxnet3_adapter *adapter) sz = adapter->rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN; ring0_size = adapter->rx_queue[0].rx_ring[0].size; ring0_size = (ring0_size + sz - 1) / sz * sz; - ring0_size = min_t(u32, rq->rx_ring[0].size, VMXNET3_RX_RING_MAX_SIZE / + ring0_size = min_t(u32, ring0_size, VMXNET3_RX_RING_MAX_SIZE / sz * sz); ring1_size = adapter->rx_queue[0].rx_ring[1].size; comp_size = ring0_size + ring1_size; -- cgit v1.2.1 From f9f2502626133e33599578a16ed54435733f062c Mon Sep 17 00:00:00 2001 From: Shreyas Bhatewara Date: Fri, 14 Jan 2011 14:59:31 +0000 Subject: vmxnet3: Preserve the MAC address configured by ifconfig While activating the device get it's MAC address from netdev. This will allow the MAC address configured using ifconfig to persist through the reset. Signed-off-by: Shreyas N Bhatewara Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 562bdbb01507..89bcee8ee3d9 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -48,6 +48,9 @@ static atomic_t devices_found; static int enable_mq = 1; static int irq_share_mode; +static void +vmxnet3_write_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac); + /* * Enable/Disable the given intr */ @@ -2168,6 +2171,8 @@ vmxnet3_setup_driver_shared(struct vmxnet3_adapter *adapter) /* rx filter settings */ devRead->rxFilterConf.rxMode = 0; vmxnet3_restore_vlan(adapter); + vmxnet3_write_mac_addr(adapter, adapter->netdev->dev_addr); + /* the rest are already zeroed */ } -- cgit v1.2.1 From 54da3d00f6e781f69cb8726757d190704b702a8e Mon Sep 17 00:00:00 2001 From: Shreyas Bhatewara Date: Fri, 14 Jan 2011 14:59:36 +0000 Subject: vmxnet3: Enable HW Rx VLAN stripping by default Make hw vlan tag stripping as enabled by default. Thereby remove the code to conditionally enable it later. Signed-off-by: Guolin Yang Signed-off-by: Shreyas N Bhatewara Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 89bcee8ee3d9..f47db1cc766f 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -1867,13 +1867,8 @@ vmxnet3_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) /* add vlan rx stripping. */ if (adapter->netdev->features & NETIF_F_HW_VLAN_RX) { int i; - struct Vmxnet3_DSDevRead *devRead = &shared->devRead; adapter->vlan_grp = grp; - /* update FEATURES to device */ - devRead->misc.uptFeatures |= UPT1_F_RXVLAN; - VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, - VMXNET3_CMD_UPDATE_FEATURE); /* * Clear entire vfTable; then enable untagged pkts. * Note: setting one entry in vfTable to non-zero turns @@ -1905,11 +1900,6 @@ vmxnet3_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) } VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_UPDATE_VLAN_FILTERS); - - /* update FEATURES to device */ - devRead->misc.uptFeatures &= ~UPT1_F_RXVLAN; - VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, - VMXNET3_CMD_UPDATE_FEATURE); } } } @@ -2083,10 +2073,8 @@ vmxnet3_setup_driver_shared(struct vmxnet3_adapter *adapter) devRead->misc.uptFeatures |= UPT1_F_LRO; devRead->misc.maxNumRxSG = cpu_to_le16(1 + MAX_SKB_FRAGS); } - if ((adapter->netdev->features & NETIF_F_HW_VLAN_RX) && - adapter->vlan_grp) { + if (adapter->netdev->features & NETIF_F_HW_VLAN_RX) devRead->misc.uptFeatures |= UPT1_F_RXVLAN; - } devRead->misc.mtu = cpu_to_le32(adapter->netdev->mtu); devRead->misc.queueDescPA = cpu_to_le64(adapter->queue_desc_pa); -- cgit v1.2.1 From 39d4a96fd7d2926e46151adbd18b810aeeea8ec0 Mon Sep 17 00:00:00 2001 From: Shreyas Bhatewara Date: Fri, 14 Jan 2011 14:59:41 +0000 Subject: vmxnet3: Provide required number of bytes in first SG buffer This is a performance enhancement fix. vmxnet3 device performs better when provided with at least 54 bytes (ethernet 14 + IP 20+ TCP 20) in the first SG buffer. For UDP packets driver provides lesser than that in first sg. This change fixes the same. Also avoid the redundant pskb_may_pull() call. Signed-off-by: Shreyas N Bhatewara Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index f47db1cc766f..a1632a995380 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -807,30 +807,25 @@ vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq, skb_transport_header(skb))->doff * 4; ctx->copy_size = ctx->eth_ip_hdr_size + ctx->l4_hdr_size; } else { - unsigned int pull_size; - if (skb->ip_summed == CHECKSUM_PARTIAL) { ctx->eth_ip_hdr_size = skb_checksum_start_offset(skb); if (ctx->ipv4) { struct iphdr *iph = (struct iphdr *) skb_network_header(skb); - if (iph->protocol == IPPROTO_TCP) { - pull_size = ctx->eth_ip_hdr_size + - sizeof(struct tcphdr); - - if (unlikely(!pskb_may_pull(skb, - pull_size))) { - goto err; - } + if (iph->protocol == IPPROTO_TCP) ctx->l4_hdr_size = ((struct tcphdr *) skb_transport_header(skb))->doff * 4; - } else if (iph->protocol == IPPROTO_UDP) { + else if (iph->protocol == IPPROTO_UDP) + /* + * Use tcp header size so that bytes to + * be copied are more than required by + * the device. + */ ctx->l4_hdr_size = - sizeof(struct udphdr); - } else { + sizeof(struct tcphdr); + else ctx->l4_hdr_size = 0; - } } else { /* for simplicity, don't copy L4 headers */ ctx->l4_hdr_size = 0; -- cgit v1.2.1 From 76d39dae0ad47f51291b4dd146b10d71e8ae02f7 Mon Sep 17 00:00:00 2001 From: Shreyas Bhatewara Date: Fri, 14 Jan 2011 14:59:47 +0000 Subject: vmxnet3: Make ethtool handlers multiqueue aware Show per-queue stats in ethtool -S output for vmxnet3 interface. Register dump of ethtool should dump registers for all tx and rx queues. Signed-off-by: Shreyas N Bhatewara Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_ethtool.c | 259 +++++++++++++++++++--------------- 1 file changed, 145 insertions(+), 114 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c index 8e17fc8a7fe7..d70cee17384d 100644 --- a/drivers/net/vmxnet3/vmxnet3_ethtool.c +++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c @@ -68,76 +68,78 @@ vmxnet3_set_rx_csum(struct net_device *netdev, u32 val) static const struct vmxnet3_stat_desc vmxnet3_tq_dev_stats[] = { /* description, offset */ - { "TSO pkts tx", offsetof(struct UPT1_TxStats, TSOPktsTxOK) }, - { "TSO bytes tx", offsetof(struct UPT1_TxStats, TSOBytesTxOK) }, - { "ucast pkts tx", offsetof(struct UPT1_TxStats, ucastPktsTxOK) }, - { "ucast bytes tx", offsetof(struct UPT1_TxStats, ucastBytesTxOK) }, - { "mcast pkts tx", offsetof(struct UPT1_TxStats, mcastPktsTxOK) }, - { "mcast bytes tx", offsetof(struct UPT1_TxStats, mcastBytesTxOK) }, - { "bcast pkts tx", offsetof(struct UPT1_TxStats, bcastPktsTxOK) }, - { "bcast bytes tx", offsetof(struct UPT1_TxStats, bcastBytesTxOK) }, - { "pkts tx err", offsetof(struct UPT1_TxStats, pktsTxError) }, - { "pkts tx discard", offsetof(struct UPT1_TxStats, pktsTxDiscard) }, + { "Tx Queue#", 0 }, + { " TSO pkts tx", offsetof(struct UPT1_TxStats, TSOPktsTxOK) }, + { " TSO bytes tx", offsetof(struct UPT1_TxStats, TSOBytesTxOK) }, + { " ucast pkts tx", offsetof(struct UPT1_TxStats, ucastPktsTxOK) }, + { " ucast bytes tx", offsetof(struct UPT1_TxStats, ucastBytesTxOK) }, + { " mcast pkts tx", offsetof(struct UPT1_TxStats, mcastPktsTxOK) }, + { " mcast bytes tx", offsetof(struct UPT1_TxStats, mcastBytesTxOK) }, + { " bcast pkts tx", offsetof(struct UPT1_TxStats, bcastPktsTxOK) }, + { " bcast bytes tx", offsetof(struct UPT1_TxStats, bcastBytesTxOK) }, + { " pkts tx err", offsetof(struct UPT1_TxStats, pktsTxError) }, + { " pkts tx discard", offsetof(struct UPT1_TxStats, pktsTxDiscard) }, }; /* per tq stats maintained by the driver */ static const struct vmxnet3_stat_desc vmxnet3_tq_driver_stats[] = { /* description, offset */ - {"drv dropped tx total", offsetof(struct vmxnet3_tq_driver_stats, - drop_total) }, - { " too many frags", offsetof(struct vmxnet3_tq_driver_stats, - drop_too_many_frags) }, - { " giant hdr", offsetof(struct vmxnet3_tq_driver_stats, - drop_oversized_hdr) }, - { " hdr err", offsetof(struct vmxnet3_tq_driver_stats, - drop_hdr_inspect_err) }, - { " tso", offsetof(struct vmxnet3_tq_driver_stats, - drop_tso) }, - { "ring full", offsetof(struct vmxnet3_tq_driver_stats, - tx_ring_full) }, - { "pkts linearized", offsetof(struct vmxnet3_tq_driver_stats, - linearized) }, - { "hdr cloned", offsetof(struct vmxnet3_tq_driver_stats, - copy_skb_header) }, - { "giant hdr", offsetof(struct vmxnet3_tq_driver_stats, - oversized_hdr) }, + {" drv dropped tx total", offsetof(struct vmxnet3_tq_driver_stats, + drop_total) }, + { " too many frags", offsetof(struct vmxnet3_tq_driver_stats, + drop_too_many_frags) }, + { " giant hdr", offsetof(struct vmxnet3_tq_driver_stats, + drop_oversized_hdr) }, + { " hdr err", offsetof(struct vmxnet3_tq_driver_stats, + drop_hdr_inspect_err) }, + { " tso", offsetof(struct vmxnet3_tq_driver_stats, + drop_tso) }, + { " ring full", offsetof(struct vmxnet3_tq_driver_stats, + tx_ring_full) }, + { " pkts linearized", offsetof(struct vmxnet3_tq_driver_stats, + linearized) }, + { " hdr cloned", offsetof(struct vmxnet3_tq_driver_stats, + copy_skb_header) }, + { " giant hdr", offsetof(struct vmxnet3_tq_driver_stats, + oversized_hdr) }, }; /* per rq stats maintained by the device */ static const struct vmxnet3_stat_desc vmxnet3_rq_dev_stats[] = { - { "LRO pkts rx", offsetof(struct UPT1_RxStats, LROPktsRxOK) }, - { "LRO byte rx", offsetof(struct UPT1_RxStats, LROBytesRxOK) }, - { "ucast pkts rx", offsetof(struct UPT1_RxStats, ucastPktsRxOK) }, - { "ucast bytes rx", offsetof(struct UPT1_RxStats, ucastBytesRxOK) }, - { "mcast pkts rx", offsetof(struct UPT1_RxStats, mcastPktsRxOK) }, - { "mcast bytes rx", offsetof(struct UPT1_RxStats, mcastBytesRxOK) }, - { "bcast pkts rx", offsetof(struct UPT1_RxStats, bcastPktsRxOK) }, - { "bcast bytes rx", offsetof(struct UPT1_RxStats, bcastBytesRxOK) }, - { "pkts rx out of buf", offsetof(struct UPT1_RxStats, pktsRxOutOfBuf) }, - { "pkts rx err", offsetof(struct UPT1_RxStats, pktsRxError) }, + { "Rx Queue#", 0 }, + { " LRO pkts rx", offsetof(struct UPT1_RxStats, LROPktsRxOK) }, + { " LRO byte rx", offsetof(struct UPT1_RxStats, LROBytesRxOK) }, + { " ucast pkts rx", offsetof(struct UPT1_RxStats, ucastPktsRxOK) }, + { " ucast bytes rx", offsetof(struct UPT1_RxStats, ucastBytesRxOK) }, + { " mcast pkts rx", offsetof(struct UPT1_RxStats, mcastPktsRxOK) }, + { " mcast bytes rx", offsetof(struct UPT1_RxStats, mcastBytesRxOK) }, + { " bcast pkts rx", offsetof(struct UPT1_RxStats, bcastPktsRxOK) }, + { " bcast bytes rx", offsetof(struct UPT1_RxStats, bcastBytesRxOK) }, + { " pkts rx OOB", offsetof(struct UPT1_RxStats, pktsRxOutOfBuf) }, + { " pkts rx err", offsetof(struct UPT1_RxStats, pktsRxError) }, }; /* per rq stats maintained by the driver */ static const struct vmxnet3_stat_desc vmxnet3_rq_driver_stats[] = { /* description, offset */ - { "drv dropped rx total", offsetof(struct vmxnet3_rq_driver_stats, - drop_total) }, - { " err", offsetof(struct vmxnet3_rq_driver_stats, - drop_err) }, - { " fcs", offsetof(struct vmxnet3_rq_driver_stats, - drop_fcs) }, - { "rx buf alloc fail", offsetof(struct vmxnet3_rq_driver_stats, - rx_buf_alloc_failure) }, + { " drv dropped rx total", offsetof(struct vmxnet3_rq_driver_stats, + drop_total) }, + { " err", offsetof(struct vmxnet3_rq_driver_stats, + drop_err) }, + { " fcs", offsetof(struct vmxnet3_rq_driver_stats, + drop_fcs) }, + { " rx buf alloc fail", offsetof(struct vmxnet3_rq_driver_stats, + rx_buf_alloc_failure) }, }; /* gloabl stats maintained by the driver */ static const struct vmxnet3_stat_desc vmxnet3_global_stats[] = { /* description, offset */ - { "tx timeout count", offsetof(struct vmxnet3_adapter, + { "tx timeout count", offsetof(struct vmxnet3_adapter, tx_timeout_count) } }; @@ -193,12 +195,15 @@ vmxnet3_get_stats(struct net_device *netdev) static int vmxnet3_get_sset_count(struct net_device *netdev, int sset) { + struct vmxnet3_adapter *adapter = netdev_priv(netdev); switch (sset) { case ETH_SS_STATS: - return ARRAY_SIZE(vmxnet3_tq_dev_stats) + - ARRAY_SIZE(vmxnet3_tq_driver_stats) + - ARRAY_SIZE(vmxnet3_rq_dev_stats) + - ARRAY_SIZE(vmxnet3_rq_driver_stats) + + return (ARRAY_SIZE(vmxnet3_tq_dev_stats) + + ARRAY_SIZE(vmxnet3_tq_driver_stats)) * + adapter->num_tx_queues + + (ARRAY_SIZE(vmxnet3_rq_dev_stats) + + ARRAY_SIZE(vmxnet3_rq_driver_stats)) * + adapter->num_rx_queues + ARRAY_SIZE(vmxnet3_global_stats); default: return -EOPNOTSUPP; @@ -206,10 +211,16 @@ vmxnet3_get_sset_count(struct net_device *netdev, int sset) } +/* Should be multiple of 4 */ +#define NUM_TX_REGS 8 +#define NUM_RX_REGS 12 + static int vmxnet3_get_regs_len(struct net_device *netdev) { - return 20 * sizeof(u32); + struct vmxnet3_adapter *adapter = netdev_priv(netdev); + return (adapter->num_tx_queues * NUM_TX_REGS * sizeof(u32) + + adapter->num_rx_queues * NUM_RX_REGS * sizeof(u32)); } @@ -240,29 +251,37 @@ vmxnet3_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) static void vmxnet3_get_strings(struct net_device *netdev, u32 stringset, u8 *buf) { + struct vmxnet3_adapter *adapter = netdev_priv(netdev); if (stringset == ETH_SS_STATS) { - int i; - - for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_dev_stats); i++) { - memcpy(buf, vmxnet3_tq_dev_stats[i].desc, - ETH_GSTRING_LEN); - buf += ETH_GSTRING_LEN; - } - for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_driver_stats); i++) { - memcpy(buf, vmxnet3_tq_driver_stats[i].desc, - ETH_GSTRING_LEN); - buf += ETH_GSTRING_LEN; - } - for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_dev_stats); i++) { - memcpy(buf, vmxnet3_rq_dev_stats[i].desc, - ETH_GSTRING_LEN); - buf += ETH_GSTRING_LEN; + int i, j; + for (j = 0; j < adapter->num_tx_queues; j++) { + for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_dev_stats); i++) { + memcpy(buf, vmxnet3_tq_dev_stats[i].desc, + ETH_GSTRING_LEN); + buf += ETH_GSTRING_LEN; + } + for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_driver_stats); + i++) { + memcpy(buf, vmxnet3_tq_driver_stats[i].desc, + ETH_GSTRING_LEN); + buf += ETH_GSTRING_LEN; + } } - for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_driver_stats); i++) { - memcpy(buf, vmxnet3_rq_driver_stats[i].desc, - ETH_GSTRING_LEN); - buf += ETH_GSTRING_LEN; + + for (j = 0; j < adapter->num_rx_queues; j++) { + for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_dev_stats); i++) { + memcpy(buf, vmxnet3_rq_dev_stats[i].desc, + ETH_GSTRING_LEN); + buf += ETH_GSTRING_LEN; + } + for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_driver_stats); + i++) { + memcpy(buf, vmxnet3_rq_driver_stats[i].desc, + ETH_GSTRING_LEN); + buf += ETH_GSTRING_LEN; + } } + for (i = 0; i < ARRAY_SIZE(vmxnet3_global_stats); i++) { memcpy(buf, vmxnet3_global_stats[i].desc, ETH_GSTRING_LEN); @@ -310,23 +329,31 @@ vmxnet3_get_ethtool_stats(struct net_device *netdev, VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_STATS); /* this does assume each counter is 64-bit wide */ -/* TODO change this for multiple queues */ - - base = (u8 *)&adapter->tqd_start[j].stats; - for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_dev_stats); i++) - *buf++ = *(u64 *)(base + vmxnet3_tq_dev_stats[i].offset); - - base = (u8 *)&adapter->tx_queue[j].stats; - for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_driver_stats); i++) - *buf++ = *(u64 *)(base + vmxnet3_tq_driver_stats[i].offset); - - base = (u8 *)&adapter->rqd_start[j].stats; - for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_dev_stats); i++) - *buf++ = *(u64 *)(base + vmxnet3_rq_dev_stats[i].offset); + for (j = 0; j < adapter->num_tx_queues; j++) { + base = (u8 *)&adapter->tqd_start[j].stats; + *buf++ = (u64)j; + for (i = 1; i < ARRAY_SIZE(vmxnet3_tq_dev_stats); i++) + *buf++ = *(u64 *)(base + + vmxnet3_tq_dev_stats[i].offset); + + base = (u8 *)&adapter->tx_queue[j].stats; + for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_driver_stats); i++) + *buf++ = *(u64 *)(base + + vmxnet3_tq_driver_stats[i].offset); + } - base = (u8 *)&adapter->rx_queue[j].stats; - for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_driver_stats); i++) - *buf++ = *(u64 *)(base + vmxnet3_rq_driver_stats[i].offset); + for (j = 0; j < adapter->num_tx_queues; j++) { + base = (u8 *)&adapter->rqd_start[j].stats; + *buf++ = (u64) j; + for (i = 1; i < ARRAY_SIZE(vmxnet3_rq_dev_stats); i++) + *buf++ = *(u64 *)(base + + vmxnet3_rq_dev_stats[i].offset); + + base = (u8 *)&adapter->rx_queue[j].stats; + for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_driver_stats); i++) + *buf++ = *(u64 *)(base + + vmxnet3_rq_driver_stats[i].offset); + } base = (u8 *)adapter; for (i = 0; i < ARRAY_SIZE(vmxnet3_global_stats); i++) @@ -339,7 +366,7 @@ vmxnet3_get_regs(struct net_device *netdev, struct ethtool_regs *regs, void *p) { struct vmxnet3_adapter *adapter = netdev_priv(netdev); u32 *buf = p; - int i = 0; + int i = 0, j = 0; memset(p, 0, vmxnet3_get_regs_len(netdev)); @@ -348,31 +375,35 @@ vmxnet3_get_regs(struct net_device *netdev, struct ethtool_regs *regs, void *p) /* Update vmxnet3_get_regs_len if we want to dump more registers */ /* make each ring use multiple of 16 bytes */ -/* TODO change this for multiple queues */ - buf[0] = adapter->tx_queue[i].tx_ring.next2fill; - buf[1] = adapter->tx_queue[i].tx_ring.next2comp; - buf[2] = adapter->tx_queue[i].tx_ring.gen; - buf[3] = 0; - - buf[4] = adapter->tx_queue[i].comp_ring.next2proc; - buf[5] = adapter->tx_queue[i].comp_ring.gen; - buf[6] = adapter->tx_queue[i].stopped; - buf[7] = 0; - - buf[8] = adapter->rx_queue[i].rx_ring[0].next2fill; - buf[9] = adapter->rx_queue[i].rx_ring[0].next2comp; - buf[10] = adapter->rx_queue[i].rx_ring[0].gen; - buf[11] = 0; - - buf[12] = adapter->rx_queue[i].rx_ring[1].next2fill; - buf[13] = adapter->rx_queue[i].rx_ring[1].next2comp; - buf[14] = adapter->rx_queue[i].rx_ring[1].gen; - buf[15] = 0; - - buf[16] = adapter->rx_queue[i].comp_ring.next2proc; - buf[17] = adapter->rx_queue[i].comp_ring.gen; - buf[18] = 0; - buf[19] = 0; + for (i = 0; i < adapter->num_tx_queues; i++) { + buf[j++] = adapter->tx_queue[i].tx_ring.next2fill; + buf[j++] = adapter->tx_queue[i].tx_ring.next2comp; + buf[j++] = adapter->tx_queue[i].tx_ring.gen; + buf[j++] = 0; + + buf[j++] = adapter->tx_queue[i].comp_ring.next2proc; + buf[j++] = adapter->tx_queue[i].comp_ring.gen; + buf[j++] = adapter->tx_queue[i].stopped; + buf[j++] = 0; + } + + for (i = 0; i < adapter->num_rx_queues; i++) { + buf[j++] = adapter->rx_queue[i].rx_ring[0].next2fill; + buf[j++] = adapter->rx_queue[i].rx_ring[0].next2comp; + buf[j++] = adapter->rx_queue[i].rx_ring[0].gen; + buf[j++] = 0; + + buf[j++] = adapter->rx_queue[i].rx_ring[1].next2fill; + buf[j++] = adapter->rx_queue[i].rx_ring[1].next2comp; + buf[j++] = adapter->rx_queue[i].rx_ring[1].gen; + buf[j++] = 0; + + buf[j++] = adapter->rx_queue[i].comp_ring.next2proc; + buf[j++] = adapter->rx_queue[i].comp_ring.gen; + buf[j++] = 0; + buf[j++] = 0; + } + } -- cgit v1.2.1 From 51956cd68b0c3039968485317b77a89dfec95eab Mon Sep 17 00:00:00 2001 From: Shreyas Bhatewara Date: Fri, 14 Jan 2011 14:59:52 +0000 Subject: vmxnet3: Disable napi in suspend, reenable in resume. There is a small possibility of a race where the suspend routine gets called, while a napi callback is still pending and when that comes up, it enables interrupts which just got disabled in the suspend routine. This change adds napi disable call in suspend and enable in resume to avoid race. Signed-off-by: Shreyas N Bhatewara Acked-by: Dmitry Torokhov Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index a1632a995380..20ef4f36ea2e 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -3101,6 +3101,9 @@ vmxnet3_suspend(struct device *device) if (!netif_running(netdev)) return 0; + for (i = 0; i < adapter->num_rx_queues; i++) + napi_disable(&adapter->rx_queue[i].napi); + vmxnet3_disable_all_intrs(adapter); vmxnet3_free_irqs(adapter); vmxnet3_free_intr_resources(adapter); @@ -3192,7 +3195,7 @@ skip_arp: static int vmxnet3_resume(struct device *device) { - int err; + int err, i = 0; struct pci_dev *pdev = to_pci_dev(device); struct net_device *netdev = pci_get_drvdata(pdev); struct vmxnet3_adapter *adapter = netdev_priv(netdev); @@ -3224,6 +3227,8 @@ vmxnet3_resume(struct device *device) VMXNET3_CMD_UPDATE_PMCFG); vmxnet3_alloc_intr_resources(adapter); vmxnet3_request_irqs(adapter); + for (i = 0; i < adapter->num_rx_queues; i++) + napi_enable(&adapter->rx_queue[i].napi); vmxnet3_enable_all_intrs(adapter); return 0; -- cgit v1.2.1 From 83d0feffc5695d7dc24c6b8dac9ab265533beb78 Mon Sep 17 00:00:00 2001 From: Shreyas Bhatewara Date: Fri, 14 Jan 2011 14:59:57 +0000 Subject: vmxnet3: Add locking for access to command register Access to cmd register is racey, especially in smp environments. Protect it using a spinlock. Signed-off-by: Matthieu Bucchianeri Signed-off-by: Shreyas N Bhatewara Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 38 +++++++++++++++++++++++++++++++++++ drivers/net/vmxnet3/vmxnet3_ethtool.c | 15 ++++++++++++++ drivers/net/vmxnet3/vmxnet3_int.h | 1 + 3 files changed, 54 insertions(+) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 20ef4f36ea2e..3b5b1347757b 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -142,9 +142,13 @@ vmxnet3_check_link(struct vmxnet3_adapter *adapter, bool affectTxQueue) { u32 ret; int i; + unsigned long flags; + spin_lock_irqsave(&adapter->cmd_lock, flags); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_LINK); ret = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); + adapter->link_speed = ret >> 16; if (ret & 1) { /* Link is up. */ printk(KERN_INFO "%s: NIC Link is Up %d Mbps\n", @@ -186,8 +190,10 @@ vmxnet3_process_events(struct vmxnet3_adapter *adapter) /* Check if there is an error on xmit/recv queues */ if (events & (VMXNET3_ECR_TQERR | VMXNET3_ECR_RQERR)) { + spin_lock(&adapter->cmd_lock); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_QUEUE_STATUS); + spin_unlock(&adapter->cmd_lock); for (i = 0; i < adapter->num_tx_queues; i++) if (adapter->tqd_start[i].status.stopped) @@ -1857,6 +1863,7 @@ vmxnet3_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) struct vmxnet3_adapter *adapter = netdev_priv(netdev); struct Vmxnet3_DriverShared *shared = adapter->shared; u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + unsigned long flags; if (grp) { /* add vlan rx stripping. */ @@ -1873,8 +1880,10 @@ vmxnet3_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) vfTable[i] = 0; VMXNET3_SET_VFTABLE_ENTRY(vfTable, 0); + spin_lock_irqsave(&adapter->cmd_lock, flags); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_UPDATE_VLAN_FILTERS); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); } else { printk(KERN_ERR "%s: vlan_rx_register when device has " "no NETIF_F_HW_VLAN_RX\n", netdev->name); @@ -1893,8 +1902,10 @@ vmxnet3_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) */ vfTable[i] = 0; } + spin_lock_irqsave(&adapter->cmd_lock, flags); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_UPDATE_VLAN_FILTERS); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); } } } @@ -1927,10 +1938,13 @@ vmxnet3_vlan_rx_add_vid(struct net_device *netdev, u16 vid) { struct vmxnet3_adapter *adapter = netdev_priv(netdev); u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + unsigned long flags; VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid); + spin_lock_irqsave(&adapter->cmd_lock, flags); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_UPDATE_VLAN_FILTERS); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); } @@ -1939,10 +1953,13 @@ vmxnet3_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) { struct vmxnet3_adapter *adapter = netdev_priv(netdev); u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable; + unsigned long flags; VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid); + spin_lock_irqsave(&adapter->cmd_lock, flags); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_UPDATE_VLAN_FILTERS); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); } @@ -1973,6 +1990,7 @@ static void vmxnet3_set_mc(struct net_device *netdev) { struct vmxnet3_adapter *adapter = netdev_priv(netdev); + unsigned long flags; struct Vmxnet3_RxFilterConf *rxConf = &adapter->shared->devRead.rxFilterConf; u8 *new_table = NULL; @@ -2008,6 +2026,7 @@ vmxnet3_set_mc(struct net_device *netdev) rxConf->mfTablePA = 0; } + spin_lock_irqsave(&adapter->cmd_lock, flags); if (new_mode != rxConf->rxMode) { rxConf->rxMode = cpu_to_le32(new_mode); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, @@ -2016,6 +2035,7 @@ vmxnet3_set_mc(struct net_device *netdev) VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_UPDATE_MAC_FILTERS); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); kfree(new_table); } @@ -2165,6 +2185,7 @@ vmxnet3_activate_dev(struct vmxnet3_adapter *adapter) { int err, i; u32 ret; + unsigned long flags; dev_dbg(&adapter->netdev->dev, "%s: skb_buf_size %d, rx_buf_per_pkt %d," " ring sizes %u %u %u\n", adapter->netdev->name, @@ -2194,9 +2215,11 @@ vmxnet3_activate_dev(struct vmxnet3_adapter *adapter) adapter->shared_pa)); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAH, VMXNET3_GET_ADDR_HI( adapter->shared_pa)); + spin_lock_irqsave(&adapter->cmd_lock, flags); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_ACTIVATE_DEV); ret = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); if (ret != 0) { printk(KERN_ERR "Failed to activate dev %s: error %u\n", @@ -2243,7 +2266,10 @@ rq_err: void vmxnet3_reset_dev(struct vmxnet3_adapter *adapter) { + unsigned long flags; + spin_lock_irqsave(&adapter->cmd_lock, flags); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_RESET_DEV); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); } @@ -2251,12 +2277,15 @@ int vmxnet3_quiesce_dev(struct vmxnet3_adapter *adapter) { int i; + unsigned long flags; if (test_and_set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state)) return 0; + spin_lock_irqsave(&adapter->cmd_lock, flags); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_QUIESCE_DEV); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); vmxnet3_disable_all_intrs(adapter); for (i = 0; i < adapter->num_rx_queues; i++) @@ -2706,9 +2735,11 @@ vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter) u32 cfg; /* intr settings */ + spin_lock(&adapter->cmd_lock); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_CONF_INTR); cfg = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD); + spin_unlock(&adapter->cmd_lock); adapter->intr.type = cfg & 0x3; adapter->intr.mask_mode = (cfg >> 2) & 0x3; @@ -2893,6 +2924,7 @@ vmxnet3_probe_device(struct pci_dev *pdev, adapter->netdev = netdev; adapter->pdev = pdev; + spin_lock_init(&adapter->cmd_lock); adapter->shared = pci_alloc_consistent(adapter->pdev, sizeof(struct Vmxnet3_DriverShared), &adapter->shared_pa); @@ -3096,6 +3128,7 @@ vmxnet3_suspend(struct device *device) u8 *arpreq; struct in_device *in_dev; struct in_ifaddr *ifa; + unsigned long flags; int i = 0; if (!netif_running(netdev)) @@ -3179,8 +3212,10 @@ skip_arp: adapter->shared->devRead.pmConfDesc.confPA = cpu_to_le64(virt_to_phys( pmConf)); + spin_lock_irqsave(&adapter->cmd_lock, flags); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_UPDATE_PMCFG); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); pci_save_state(pdev); pci_enable_wake(pdev, pci_choose_state(pdev, PMSG_SUSPEND), @@ -3196,6 +3231,7 @@ static int vmxnet3_resume(struct device *device) { int err, i = 0; + unsigned long flags; struct pci_dev *pdev = to_pci_dev(device); struct net_device *netdev = pci_get_drvdata(pdev); struct vmxnet3_adapter *adapter = netdev_priv(netdev); @@ -3223,8 +3259,10 @@ vmxnet3_resume(struct device *device) pci_enable_wake(pdev, PCI_D0, 0); + spin_lock_irqsave(&adapter->cmd_lock, flags); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_UPDATE_PMCFG); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); vmxnet3_alloc_intr_resources(adapter); vmxnet3_request_irqs(adapter); for (i = 0; i < adapter->num_rx_queues; i++) diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c index d70cee17384d..81254be85b92 100644 --- a/drivers/net/vmxnet3/vmxnet3_ethtool.c +++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c @@ -45,6 +45,7 @@ static int vmxnet3_set_rx_csum(struct net_device *netdev, u32 val) { struct vmxnet3_adapter *adapter = netdev_priv(netdev); + unsigned long flags; if (adapter->rxcsum != val) { adapter->rxcsum = val; @@ -56,8 +57,10 @@ vmxnet3_set_rx_csum(struct net_device *netdev, u32 val) adapter->shared->devRead.misc.uptFeatures &= ~UPT1_F_RXCSUM; + spin_lock_irqsave(&adapter->cmd_lock, flags); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_UPDATE_FEATURE); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); } } return 0; @@ -153,12 +156,15 @@ vmxnet3_get_stats(struct net_device *netdev) struct UPT1_TxStats *devTxStats; struct UPT1_RxStats *devRxStats; struct net_device_stats *net_stats = &netdev->stats; + unsigned long flags; int i; adapter = netdev_priv(netdev); /* Collect the dev stats into the shared area */ + spin_lock_irqsave(&adapter->cmd_lock, flags); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_STATS); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); memset(net_stats, 0, sizeof(*net_stats)); for (i = 0; i < adapter->num_tx_queues; i++) { @@ -296,6 +302,7 @@ vmxnet3_set_flags(struct net_device *netdev, u32 data) struct vmxnet3_adapter *adapter = netdev_priv(netdev); u8 lro_requested = (data & ETH_FLAG_LRO) == 0 ? 0 : 1; u8 lro_present = (netdev->features & NETIF_F_LRO) == 0 ? 0 : 1; + unsigned long flags; if (data & ~ETH_FLAG_LRO) return -EOPNOTSUPP; @@ -311,8 +318,10 @@ vmxnet3_set_flags(struct net_device *netdev, u32 data) else adapter->shared->devRead.misc.uptFeatures &= ~UPT1_F_LRO; + spin_lock_irqsave(&adapter->cmd_lock, flags); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_UPDATE_FEATURE); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); } return 0; } @@ -322,11 +331,14 @@ vmxnet3_get_ethtool_stats(struct net_device *netdev, struct ethtool_stats *stats, u64 *buf) { struct vmxnet3_adapter *adapter = netdev_priv(netdev); + unsigned long flags; u8 *base; int i; int j = 0; + spin_lock_irqsave(&adapter->cmd_lock, flags); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_STATS); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); /* this does assume each counter is 64-bit wide */ for (j = 0; j < adapter->num_tx_queues; j++) { @@ -605,6 +617,7 @@ vmxnet3_set_rss_indir(struct net_device *netdev, const struct ethtool_rxfh_indir *p) { unsigned int i; + unsigned long flags; struct vmxnet3_adapter *adapter = netdev_priv(netdev); struct UPT1_RSSConf *rssConf = adapter->rss_conf; @@ -623,8 +636,10 @@ vmxnet3_set_rss_indir(struct net_device *netdev, for (i = 0; i < rssConf->indTableSize; i++) rssConf->indTable[i] = p->ring_index[i]; + spin_lock_irqsave(&adapter->cmd_lock, flags); VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_UPDATE_RSSIDT); + spin_unlock_irqrestore(&adapter->cmd_lock, flags); return 0; diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index 7fadeed37f03..474f5df52181 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -317,6 +317,7 @@ struct vmxnet3_adapter { struct vmxnet3_rx_queue rx_queue[VMXNET3_DEVICE_MAX_RX_QUEUES]; struct vlan_group *vlan_grp; struct vmxnet3_intr intr; + spinlock_t cmd_lock; struct Vmxnet3_DriverShared *shared; struct Vmxnet3_PMConf *pm_conf; struct Vmxnet3_TxQueueDesc *tqd_start; /* all tx queue desc */ -- cgit v1.2.1 From 7e96fbf2320782fb8f0970928026105cd34b41bd Mon Sep 17 00:00:00 2001 From: Shreyas Bhatewara Date: Fri, 14 Jan 2011 15:00:03 +0000 Subject: vmxnet3: Dont allocate extra MSI-x vectors In case of single tx and rx queues, three MSI-x vectors are allocated instead of two. This patch fixes that. Signed-off-by: Shreyas N Bhatewara Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 4 ++-- drivers/net/vmxnet3/vmxnet3_int.h | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 3b5b1347757b..cc14b4a75048 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -2712,7 +2712,7 @@ vmxnet3_acquire_msix_vectors(struct vmxnet3_adapter *adapter, break; } else { /* If fails to enable required number of MSI-x vectors - * try enabling 3 of them. One each for rx, tx and event + * try enabling minimum number of vectors required. */ vectors = vector_threshold; printk(KERN_ERR "Failed to enable %d MSI-X for %s, try" @@ -2774,7 +2774,7 @@ vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter) */ if (err == VMXNET3_LINUX_MIN_MSIX_VECT) { if (adapter->share_intr != VMXNET3_INTR_BUDDYSHARE - || adapter->num_rx_queues != 2) { + || adapter->num_rx_queues != 1) { adapter->share_intr = VMXNET3_INTR_TXSHARE; printk(KERN_ERR "Number of rx queues : 1\n"); adapter->num_rx_queues = 1; diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index 474f5df52181..fb5d245ac878 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -68,10 +68,10 @@ /* * Version numbers */ -#define VMXNET3_DRIVER_VERSION_STRING "1.0.16.0-k" +#define VMXNET3_DRIVER_VERSION_STRING "1.0.25.0-k" /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */ -#define VMXNET3_DRIVER_VERSION_NUM 0x01001000 +#define VMXNET3_DRIVER_VERSION_NUM 0x01001900 #if defined(CONFIG_PCI_MSI) /* RSS only makes sense if MSI-X is supported. */ @@ -289,7 +289,7 @@ struct vmxnet3_rx_queue { #define VMXNET3_LINUX_MAX_MSIX_VECT (VMXNET3_DEVICE_MAX_TX_QUEUES + \ VMXNET3_DEVICE_MAX_RX_QUEUES + 1) -#define VMXNET3_LINUX_MIN_MSIX_VECT 3 /* 1 for each : tx, rx and event */ +#define VMXNET3_LINUX_MIN_MSIX_VECT 2 /* 1 for tx-rx pair and 1 for event */ struct vmxnet3_intr { -- cgit v1.2.1 From f03c65993b98eeb909a4012ce7833c5857d74755 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 14 Jan 2011 22:30:21 -0500 Subject: sanitize vfsmount refcounting changes Instead of splitting refcount between (per-cpu) mnt_count and (SMP-only) mnt_longrefs, make all references contribute to mnt_count again and keep track of how many are longterm ones. Accounting rules for longterm count: * 1 for each fs_struct.root.mnt * 1 for each fs_struct.pwd.mnt * 1 for having non-NULL ->mnt_ns * decrement to 0 happens only under vfsmount lock exclusive That allows nice common case for mntput() - since we can't drop the final reference until after mnt_longterm has reached 0 due to the rules above, mntput() can grab vfsmount lock shared and check mnt_longterm. If it turns out to be non-zero (which is the common case), we know that this is not the final mntput() and can just blindly decrement percpu mnt_count. Otherwise we grab vfsmount lock exclusive and do usual decrement-and-check of percpu mnt_count. For fs_struct.c we have mnt_make_longterm() and mnt_make_shortterm(); namespace.c uses the latter in places where we don't already hold vfsmount lock exclusive and opencodes a few remaining spots where we need to manipulate mnt_longterm. Note that we mostly revert the code outside of fs/namespace.c back to what we used to have; in particular, normal code doesn't need to care about two kinds of references, etc. And we get to keep the optimization Nick's variant had bought us... Signed-off-by: Al Viro --- drivers/mtd/mtdchar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index ee4bb3330bdf..98240575a18d 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -1201,7 +1201,7 @@ err_unregister_chdev: static void __exit cleanup_mtdchar(void) { unregister_mtd_user(&mtdchar_notifier); - mntput_long(mtd_inode_mnt); + mntput(mtd_inode_mnt); unregister_filesystem(&mtd_inodefs_type); __unregister_chrdev(MTD_CHAR_MAJOR, 0, 1 << MINORBITS, "mtd"); } -- cgit v1.2.1 From d3072e6a7e9bf7aca200370317f8e297be360b17 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 16 Jan 2011 20:44:22 +0100 Subject: ACPI: Fix boot problem related to APEI with acpi_disabled set Commit 415e12b23792 ("PCI/ACPI: Request _OSC control once for each root bridge (v3)") put the acpi_hest_init() call in acpi_pci_root_init() into a wrong place, presumably because the author confused acpi_pci_disabled with acpi_disabled. Bring the code ordering in acpi_pci_root_init() back to sanity. Additionally, make sure that hest_disable is set when acpi_disabled is set, which is going to prevent acpi_hest_parse(), that still may be executed for acpi_disabled=1 through aer_acpi_firmware_first(), from crashing because of uninitialized hest_tab. Reported-and-tested-by: Andres Salomon Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- drivers/acpi/apei/hest.c | 6 +++--- drivers/acpi/pci_root.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c index 4ee58e72b730..abda3786a5d7 100644 --- a/drivers/acpi/apei/hest.c +++ b/drivers/acpi/apei/hest.c @@ -201,14 +201,14 @@ void __init acpi_hest_init(void) int rc = -ENODEV; unsigned int ghes_count = 0; - if (acpi_disabled) - return; - if (hest_disable) { pr_info(HEST_PFX "Table parsing disabled.\n"); return; } + if (acpi_disabled) + goto err; + status = acpi_get_table(ACPI_SIG_HEST, 0, (struct acpi_table_header **)&hest_tab); if (status == AE_NOT_FOUND) { diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index d9766797cd98..85249395623b 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -633,11 +633,11 @@ static int acpi_pci_root_remove(struct acpi_device *device, int type) static int __init acpi_pci_root_init(void) { + acpi_hest_init(); + if (acpi_pci_disabled) return 0; - acpi_hest_init(); - pci_acpi_crs_quirks(); if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0) return -ENODEV; -- cgit v1.2.1 From d9f9ab51e55e36379773752ffeaac677b080d469 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sun, 16 Jan 2011 21:13:59 +0000 Subject: net: Make NETCONSOLE_DYNAMIC depend on CONFIGFS_FS This patch fixes the following kconfig error after changing CONFIGFS_FS -> select SYSFS: fs/sysfs/Kconfig:1:error: recursive dependency detected! fs/sysfs/Kconfig:1: symbol SYSFS is selected by CONFIGFS_FS fs/configfs/Kconfig:1: symbol CONFIGFS_FS is selected by NETCONSOLE_DYNAMIC drivers/net/Kconfig:3390: symbol NETCONSOLE_DYNAMIC depends on SYSFS Signed-off-by: Nicholas A. Bellinger Cc: Joel Becker Cc: Randy Dunlap Cc: Stephen Rothwell Cc: James Bottomley --- drivers/net/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 4c8bfc97fb4c..16fe4f9b719b 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -3389,8 +3389,7 @@ config NETCONSOLE config NETCONSOLE_DYNAMIC bool "Dynamic reconfiguration of logging targets" - depends on NETCONSOLE && SYSFS - select CONFIGFS_FS + depends on NETCONSOLE && SYSFS && CONFIGFS_FS help This option enables the ability to dynamically reconfigure target parameters (interface, IP addresses, port numbers, MAC addresses) -- cgit v1.2.1 From 2a4c97ead4b375a64063523210939b87ad225b85 Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Wed, 24 Nov 2010 17:29:30 +0000 Subject: RDMA/nes: Fix bonding on iw_nes Enable configuring bonds on nes devices by adding missing support for master net_device to the driver. Signed-off-by: Maciej Sosnowski Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes.c | 24 +++++++++++++++++++----- drivers/infiniband/hw/nes/nes_cm.c | 8 +++++++- 2 files changed, 26 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c index 0c9f0aa5d4ea..e17f52c21947 100644 --- a/drivers/infiniband/hw/nes/nes.c +++ b/drivers/infiniband/hw/nes/nes.c @@ -144,6 +144,7 @@ static int nes_inetaddr_event(struct notifier_block *notifier, struct nes_device *nesdev; struct net_device *netdev; struct nes_vnic *nesvnic; + unsigned int is_bonded; nes_debug(NES_DBG_NETDEV, "nes_inetaddr_event: ip address %pI4, netmask %pI4.\n", &ifa->ifa_address, &ifa->ifa_mask); @@ -152,7 +153,8 @@ static int nes_inetaddr_event(struct notifier_block *notifier, nesdev, nesdev->netdev[0]->name); netdev = nesdev->netdev[0]; nesvnic = netdev_priv(netdev); - if (netdev == event_netdev) { + is_bonded = (netdev->master == event_netdev); + if ((netdev == event_netdev) || is_bonded) { if (nesvnic->rdma_enabled == 0) { nes_debug(NES_DBG_NETDEV, "Returning without processing event for %s since" " RDMA is not enabled.\n", @@ -169,7 +171,10 @@ static int nes_inetaddr_event(struct notifier_block *notifier, nes_manage_arp_cache(netdev, netdev->dev_addr, ntohl(nesvnic->local_ipaddr), NES_ARP_DELETE); nesvnic->local_ipaddr = 0; - return NOTIFY_OK; + if (is_bonded) + continue; + else + return NOTIFY_OK; break; case NETDEV_UP: nes_debug(NES_DBG_NETDEV, "event:UP\n"); @@ -178,15 +183,24 @@ static int nes_inetaddr_event(struct notifier_block *notifier, nes_debug(NES_DBG_NETDEV, "Interface already has local_ipaddr\n"); return NOTIFY_OK; } + /* fall through */ + case NETDEV_CHANGEADDR: /* Add the address to the IP table */ - nesvnic->local_ipaddr = ifa->ifa_address; + if (netdev->master) + nesvnic->local_ipaddr = + ((struct in_device *)netdev->master->ip_ptr)->ifa_list->ifa_address; + else + nesvnic->local_ipaddr = ifa->ifa_address; nes_write_indexed(nesdev, NES_IDX_DST_IP_ADDR+(0x10*PCI_FUNC(nesdev->pcidev->devfn)), - ntohl(ifa->ifa_address)); + ntohl(nesvnic->local_ipaddr)); nes_manage_arp_cache(netdev, netdev->dev_addr, ntohl(nesvnic->local_ipaddr), NES_ARP_ADD); - return NOTIFY_OK; + if (is_bonded) + continue; + else + return NOTIFY_OK; break; default: break; diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 25ad0f9944c0..009ec814d517 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -1107,6 +1107,7 @@ static int nes_addr_resolve_neigh(struct nes_vnic *nesvnic, u32 dst_ip, int arpi struct flowi fl; struct neighbour *neigh; int rc = arpindex; + struct net_device *netdev; struct nes_adapter *nesadapter = nesvnic->nesdev->nesadapter; memset(&fl, 0, sizeof fl); @@ -1117,7 +1118,12 @@ static int nes_addr_resolve_neigh(struct nes_vnic *nesvnic, u32 dst_ip, int arpi return rc; } - neigh = neigh_lookup(&arp_tbl, &rt->rt_gateway, nesvnic->netdev); + if (nesvnic->netdev->master) + netdev = nesvnic->netdev->master; + else + netdev = nesvnic->netdev; + + neigh = neigh_lookup(&arp_tbl, &rt->rt_gateway, netdev); if (neigh) { if (neigh->nud_state & NUD_VALID) { nes_debug(NES_DBG_CM, "Neighbor MAC address for 0x%08X" -- cgit v1.2.1 From ea623455b736d82f476460647e8b5fe5dc36f4f2 Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Wed, 24 Nov 2010 17:29:38 +0000 Subject: RDMA/nes: Generate IB_EVENT_PORT_ERR/PORT_ACTIVE events Depending on link state change, IB_EVENT_PORT_ERR or IB_EVENT_PORT_ACTIVE should be generated when handling MAC interrupts. Plugging in a cable happens to result in series of interrupts changing driver's link state a number of times before finally staying at link up (e.g. link up, link down, link up, link down, ..., link up). To prevent sending series of redundant IB_EVENT_PORT_ACTIVE and IB_EVENT_PORT_ERR events, we use a timer to debounce them in nes_port_ibevent(). Signed-off-by: Maciej Sosnowski Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_hw.c | 14 +++++++++++++ drivers/infiniband/hw/nes/nes_hw.h | 6 ++++++ drivers/infiniband/hw/nes/nes_nic.c | 35 +++++++++++++++++++++++++-------- drivers/infiniband/hw/nes/nes_verbs.c | 37 ++++++++++++++++++++++++++++++++++- 4 files changed, 83 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index 1980a461c499..2b89b06ca7c3 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -2608,6 +2608,13 @@ static void nes_process_mac_intr(struct nes_device *nesdev, u32 mac_number) netif_start_queue(nesvnic->netdev); nesvnic->linkup = 1; netif_carrier_on(nesvnic->netdev); + + spin_lock(&nesvnic->port_ibevent_lock); + if (nesdev->iw_status == 0) { + nesdev->iw_status = 1; + nes_port_ibevent(nesvnic); + } + spin_unlock(&nesvnic->port_ibevent_lock); } } } else { @@ -2633,6 +2640,13 @@ static void nes_process_mac_intr(struct nes_device *nesdev, u32 mac_number) netif_stop_queue(nesvnic->netdev); nesvnic->linkup = 0; netif_carrier_off(nesvnic->netdev); + + spin_lock(&nesvnic->port_ibevent_lock); + if (nesdev->iw_status == 1) { + nesdev->iw_status = 0; + nes_port_ibevent(nesvnic); + } + spin_unlock(&nesvnic->port_ibevent_lock); } } } diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h index 1204c3432b63..8a9ea9a4dc5d 100644 --- a/drivers/infiniband/hw/nes/nes_hw.h +++ b/drivers/infiniband/hw/nes/nes_hw.h @@ -1193,6 +1193,8 @@ struct nes_listener { struct nes_ib_device; +#define NES_EVENT_DELAY msecs_to_jiffies(100) + struct nes_vnic { struct nes_ib_device *nesibdev; u64 sq_full; @@ -1247,6 +1249,10 @@ struct nes_vnic { u32 lro_max_aggr; struct net_lro_mgr lro_mgr; struct net_lro_desc lro_desc[NES_MAX_LRO_DESCRIPTORS]; + struct timer_list event_timer; + enum ib_event_type delayed_event; + enum ib_event_type last_dispatched_event; + spinlock_t port_ibevent_lock; }; struct nes_ib_device { diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c index 5a4c36484722..81052fbcd9ba 100644 --- a/drivers/infiniband/hw/nes/nes_nic.c +++ b/drivers/infiniband/hw/nes/nes_nic.c @@ -144,6 +144,7 @@ static int nes_netdev_open(struct net_device *netdev) u32 nic_active_bit; u32 nic_active; struct list_head *list_pos, *list_temp; + unsigned long flags; assert(nesdev != NULL); @@ -233,18 +234,27 @@ static int nes_netdev_open(struct net_device *netdev) first_nesvnic = nesvnic; } - if (nesvnic->of_device_registered) { - nesdev->iw_status = 1; - nesdev->nesadapter->send_term_ok = 1; - nes_port_ibevent(nesvnic); - } - if (first_nesvnic->linkup) { /* Enable network packets */ nesvnic->linkup = 1; netif_start_queue(netdev); netif_carrier_on(netdev); } + + spin_lock_irqsave(&nesvnic->port_ibevent_lock, flags); + if (nesvnic->of_device_registered) { + nesdev->nesadapter->send_term_ok = 1; + if (nesvnic->linkup == 1) { + if (nesdev->iw_status == 0) { + nesdev->iw_status = 1; + nes_port_ibevent(nesvnic); + } + } else { + nesdev->iw_status = 0; + } + } + spin_unlock_irqrestore(&nesvnic->port_ibevent_lock, flags); + napi_enable(&nesvnic->napi); nesvnic->netdev_open = 1; @@ -263,6 +273,7 @@ static int nes_netdev_stop(struct net_device *netdev) u32 nic_active; struct nes_vnic *first_nesvnic = NULL; struct list_head *list_pos, *list_temp; + unsigned long flags; nes_debug(NES_DBG_SHUTDOWN, "nesvnic=%p, nesdev=%p, netdev=%p %s\n", nesvnic, nesdev, netdev, netdev->name); @@ -315,12 +326,17 @@ static int nes_netdev_stop(struct net_device *netdev) nic_active &= nic_active_mask; nes_write_indexed(nesdev, NES_IDX_NIC_BROADCAST_ON, nic_active); - + spin_lock_irqsave(&nesvnic->port_ibevent_lock, flags); if (nesvnic->of_device_registered) { nesdev->nesadapter->send_term_ok = 0; nesdev->iw_status = 0; - nes_port_ibevent(nesvnic); + if (nesvnic->linkup == 1) + nes_port_ibevent(nesvnic); } + del_timer_sync(&nesvnic->event_timer); + nesvnic->event_timer.function = NULL; + spin_unlock_irqrestore(&nesvnic->port_ibevent_lock, flags); + nes_destroy_nic_qp(nesvnic); nesvnic->netdev_open = 0; @@ -1750,7 +1766,10 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev, nesvnic->rdma_enabled = 0; } nesvnic->nic_cq.cq_number = nesvnic->nic.qp_id; + init_timer(&nesvnic->event_timer); + nesvnic->event_timer.function = NULL; spin_lock_init(&nesvnic->tx_lock); + spin_lock_init(&nesvnic->port_ibevent_lock); nesdev->netdev[nesdev->netdev_count] = netdev; nes_debug(NES_DBG_INIT, "Adding nesvnic (%p) to the adapters nesvnic_list for MAC%d.\n", diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 99933e4e48ff..26d8018c0a7c 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -3936,6 +3936,30 @@ struct nes_ib_device *nes_init_ofa_device(struct net_device *netdev) return nesibdev; } + +/** + * nes_handle_delayed_event + */ +static void nes_handle_delayed_event(unsigned long data) +{ + struct nes_vnic *nesvnic = (void *) data; + + if (nesvnic->delayed_event != nesvnic->last_dispatched_event) { + struct ib_event event; + + event.device = &nesvnic->nesibdev->ibdev; + if (!event.device) + goto stop_timer; + event.event = nesvnic->delayed_event; + event.element.port_num = nesvnic->logical_port + 1; + ib_dispatch_event(&event); + } + +stop_timer: + nesvnic->event_timer.function = NULL; +} + + void nes_port_ibevent(struct nes_vnic *nesvnic) { struct nes_ib_device *nesibdev = nesvnic->nesibdev; @@ -3944,7 +3968,18 @@ void nes_port_ibevent(struct nes_vnic *nesvnic) event.device = &nesibdev->ibdev; event.element.port_num = nesvnic->logical_port + 1; event.event = nesdev->iw_status ? IB_EVENT_PORT_ACTIVE : IB_EVENT_PORT_ERR; - ib_dispatch_event(&event); + + if (!nesvnic->event_timer.function) { + ib_dispatch_event(&event); + nesvnic->last_dispatched_event = event.event; + nesvnic->event_timer.function = nes_handle_delayed_event; + nesvnic->event_timer.data = (unsigned long) nesvnic; + nesvnic->event_timer.expires = jiffies + NES_EVENT_DELAY; + add_timer(&nesvnic->event_timer); + } else { + mod_timer(&nesvnic->event_timer, jiffies + NES_EVENT_DELAY); + } + nesvnic->delayed_event = event.event; } -- cgit v1.2.1 From 5f61b2c6939bb6d26393df15765bc3cb260db063 Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Wed, 24 Nov 2010 17:29:46 +0000 Subject: RDMA/nes: Fix SFP+ link down detection issue with switch port disable In case of SFP+ PHY, link status check at interrupt processing can give false results. For proper link status change detection a delayed recheck is needed to give nes registers time to settle. Add a periodic link status recheck scheduled at interrupt to detect potential delayed registers state changes. Addresses: http://bugs.openfabrics.org/bugzilla/show_bug.cgi?id=2117 Signed-off-by: Maciej Sosnowski Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes.c | 11 ++++++ drivers/infiniband/hw/nes/nes.h | 4 ++ drivers/infiniband/hw/nes/nes_hw.c | 81 ++++++++++++++++++++++++++++++++++++++ drivers/infiniband/hw/nes/nes_hw.h | 4 ++ 4 files changed, 100 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c index e17f52c21947..3b4ec3238ceb 100644 --- a/drivers/infiniband/hw/nes/nes.c +++ b/drivers/infiniband/hw/nes/nes.c @@ -674,6 +674,8 @@ static int __devinit nes_probe(struct pci_dev *pcidev, const struct pci_device_i } nes_notifiers_registered++; + INIT_DELAYED_WORK(&nesdev->work, nes_recheck_link_status); + /* Initialize network devices */ if ((netdev = nes_netdev_init(nesdev, mmio_regs)) == NULL) goto bail7; @@ -756,6 +758,7 @@ static void __devexit nes_remove(struct pci_dev *pcidev) struct nes_device *nesdev = pci_get_drvdata(pcidev); struct net_device *netdev; int netdev_index = 0; + unsigned long flags; if (nesdev->netdev_count) { netdev = nesdev->netdev[netdev_index]; @@ -782,6 +785,14 @@ static void __devexit nes_remove(struct pci_dev *pcidev) free_irq(pcidev->irq, nesdev); tasklet_kill(&nesdev->dpc_tasklet); + spin_lock_irqsave(&nesdev->nesadapter->phy_lock, flags); + if (nesdev->link_recheck) { + spin_unlock_irqrestore(&nesdev->nesadapter->phy_lock, flags); + cancel_delayed_work_sync(&nesdev->work); + } else { + spin_unlock_irqrestore(&nesdev->nesadapter->phy_lock, flags); + } + /* Deallocate the Adapter Structure */ nes_destroy_adapter(nesdev->nesadapter); diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h index b3d145e82b4c..6fe79876009e 100644 --- a/drivers/infiniband/hw/nes/nes.h +++ b/drivers/infiniband/hw/nes/nes.h @@ -268,6 +268,9 @@ struct nes_device { u8 napi_isr_ran; u8 disable_rx_flow_control; u8 disable_tx_flow_control; + + struct delayed_work work; + u8 link_recheck; }; @@ -507,6 +510,7 @@ void nes_nic_ce_handler(struct nes_device *, struct nes_hw_nic_cq *); void nes_iwarp_ce_handler(struct nes_device *, struct nes_hw_cq *); int nes_destroy_cqp(struct nes_device *); int nes_nic_cm_xmit(struct sk_buff *, struct net_device *); +void nes_recheck_link_status(struct work_struct *work); /* nes_nic.c */ struct net_device *nes_netdev_init(struct nes_device *, void __iomem *); diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index 2b89b06ca7c3..8b606fd64022 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -2650,6 +2650,13 @@ static void nes_process_mac_intr(struct nes_device *nesdev, u32 mac_number) } } } + if (nesadapter->phy_type[mac_index] == NES_PHY_TYPE_SFP_D) { + if (nesdev->link_recheck) + cancel_delayed_work(&nesdev->work); + nesdev->link_recheck = 1; + schedule_delayed_work(&nesdev->work, + NES_LINK_RECHECK_DELAY); + } } spin_unlock_irqrestore(&nesadapter->phy_lock, flags); @@ -2657,6 +2664,80 @@ static void nes_process_mac_intr(struct nes_device *nesdev, u32 mac_number) nesadapter->mac_sw_state[mac_number] = NES_MAC_SW_IDLE; } +void nes_recheck_link_status(struct work_struct *work) +{ + unsigned long flags; + struct nes_device *nesdev = container_of(work, struct nes_device, work.work); + struct nes_adapter *nesadapter = nesdev->nesadapter; + struct nes_vnic *nesvnic; + u32 mac_index = nesdev->mac_index; + u16 phy_data; + u16 temp_phy_data; + + spin_lock_irqsave(&nesadapter->phy_lock, flags); + + /* check link status */ + nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 1, 0x9003); + temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); + + nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 3, 0x0021); + nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); + nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 3, 0x0021); + phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); + + phy_data = (!temp_phy_data && (phy_data == 0x8000)) ? 0x4 : 0x0; + + nes_debug(NES_DBG_PHY, "%s: Phy data = 0x%04X, link was %s.\n", + __func__, phy_data, + nesadapter->mac_link_down[mac_index] ? "DOWN" : "UP"); + + if (phy_data & 0x0004) { + nesadapter->mac_link_down[mac_index] = 0; + list_for_each_entry(nesvnic, &nesadapter->nesvnic_list[mac_index], list) { + if (nesvnic->linkup == 0) { + printk(PFX "The Link is now up for port %s, netdev %p.\n", + nesvnic->netdev->name, nesvnic->netdev); + if (netif_queue_stopped(nesvnic->netdev)) + netif_start_queue(nesvnic->netdev); + nesvnic->linkup = 1; + netif_carrier_on(nesvnic->netdev); + + spin_lock(&nesvnic->port_ibevent_lock); + if (nesdev->iw_status == 0) { + nesdev->iw_status = 1; + nes_port_ibevent(nesvnic); + } + spin_unlock(&nesvnic->port_ibevent_lock); + } + } + + } else { + nesadapter->mac_link_down[mac_index] = 1; + list_for_each_entry(nesvnic, &nesadapter->nesvnic_list[mac_index], list) { + if (nesvnic->linkup == 1) { + printk(PFX "The Link is now down for port %s, netdev %p.\n", + nesvnic->netdev->name, nesvnic->netdev); + if (!(netif_queue_stopped(nesvnic->netdev))) + netif_stop_queue(nesvnic->netdev); + nesvnic->linkup = 0; + netif_carrier_off(nesvnic->netdev); + + spin_lock(&nesvnic->port_ibevent_lock); + if (nesdev->iw_status == 1) { + nesdev->iw_status = 0; + nes_port_ibevent(nesvnic); + } + spin_unlock(&nesvnic->port_ibevent_lock); + } + } + } + if (nesdev->link_recheck++ < NES_LINK_RECHECK_MAX) + schedule_delayed_work(&nesdev->work, NES_LINK_RECHECK_DELAY); + else + nesdev->link_recheck = 0; + + spin_unlock_irqrestore(&nesadapter->phy_lock, flags); +} static void nes_nic_napi_ce_handler(struct nes_device *nesdev, struct nes_hw_nic_cq *cq) diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h index 8a9ea9a4dc5d..d2abe07133a5 100644 --- a/drivers/infiniband/hw/nes/nes_hw.h +++ b/drivers/infiniband/hw/nes/nes_hw.h @@ -1354,6 +1354,10 @@ struct nes_terminate_hdr { #define BAD_FRAME_OFFSET 64 #define CQE_MAJOR_DRV 0x8000 +/* Used for link status recheck after interrupt processing */ +#define NES_LINK_RECHECK_DELAY msecs_to_jiffies(50) +#define NES_LINK_RECHECK_MAX 60 + #define nes_vlan_rx vlan_hwaccel_receive_skb #define nes_netif_rx netif_receive_skb -- cgit v1.2.1 From 843276ad985cb59212ceb70d989474521ff516f6 Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Wed, 24 Nov 2010 17:29:54 +0000 Subject: RDMA/nes: Fix incorrect SFP+ link status detection on driver init During iw_nes initialization the link status for SFP+ PHY is always detected as "up" regardless of real state (cable either connected or disconnected). Add SFP+ PHY specific link status detection to the iw_nes initialization procedure. Use link status recheck for netdev_open to detect delayed state updates. Signed-off-by: Maciej Sosnowski Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_nic.c | 43 +++++++++++++++++++++++++++++++++---- 1 file changed, 39 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c index 81052fbcd9ba..2c9c1933bbe3 100644 --- a/drivers/infiniband/hw/nes/nes_nic.c +++ b/drivers/infiniband/hw/nes/nes_nic.c @@ -241,6 +241,15 @@ static int nes_netdev_open(struct net_device *netdev) netif_carrier_on(netdev); } + spin_lock_irqsave(&nesdev->nesadapter->phy_lock, flags); + if (nesdev->nesadapter->phy_type[nesdev->mac_index] == NES_PHY_TYPE_SFP_D) { + if (nesdev->link_recheck) + cancel_delayed_work(&nesdev->work); + nesdev->link_recheck = 1; + schedule_delayed_work(&nesdev->work, NES_LINK_RECHECK_DELAY); + } + spin_unlock_irqrestore(&nesdev->nesadapter->phy_lock, flags); + spin_lock_irqsave(&nesvnic->port_ibevent_lock, flags); if (nesvnic->of_device_registered) { nesdev->nesadapter->send_term_ok = 1; @@ -1782,8 +1791,11 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev, (((PCI_FUNC(nesdev->pcidev->devfn) == 1) && (nesdev->mac_index == 2)) || ((PCI_FUNC(nesdev->pcidev->devfn) == 2) && (nesdev->mac_index == 1)))))) { u32 u32temp; - u32 link_mask; - u32 link_val; + u32 link_mask = 0; + u32 link_val = 0; + u16 temp_phy_data; + u16 phy_data = 0; + unsigned long flags; u32temp = nes_read_indexed(nesdev, NES_IDX_PHY_PCS_CONTROL_STATUS0 + (0x200 * (nesdev->mac_index & 1))); @@ -1805,6 +1817,23 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev, link_val = 0x02020000; } break; + case NES_PHY_TYPE_SFP_D: + spin_lock_irqsave(&nesdev->nesadapter->phy_lock, flags); + nes_read_10G_phy_reg(nesdev, + nesdev->nesadapter->phy_index[nesdev->mac_index], + 1, 0x9003); + temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); + nes_read_10G_phy_reg(nesdev, + nesdev->nesadapter->phy_index[nesdev->mac_index], + 3, 0x0021); + nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); + nes_read_10G_phy_reg(nesdev, + nesdev->nesadapter->phy_index[nesdev->mac_index], + 3, 0x0021); + phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL); + spin_unlock_irqrestore(&nesdev->nesadapter->phy_lock, flags); + phy_data = (!temp_phy_data && (phy_data == 0x8000)) ? 0x4 : 0x0; + break; default: link_mask = 0x0f1f0000; link_val = 0x0f0f0000; @@ -1814,8 +1843,14 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev, u32temp = nes_read_indexed(nesdev, NES_IDX_PHY_PCS_CONTROL_STATUS0 + (0x200 * (nesdev->mac_index & 1))); - if ((u32temp & link_mask) == link_val) - nesvnic->linkup = 1; + + if (phy_type == NES_PHY_TYPE_SFP_D) { + if (phy_data & 0x0004) + nesvnic->linkup = 1; + } else { + if ((u32temp & link_mask) == link_val) + nesvnic->linkup = 1; + } /* clear the MAC interrupt status, assumes direct logical to physical mapping */ u32temp = nes_read_indexed(nesdev, NES_IDX_MAC_INT_STATUS + (0x200 * nesdev->mac_index)); -- cgit v1.2.1 From 94ae85220a07d357d4937086c490854f63344de4 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Sun, 16 Jan 2011 20:18:05 +0000 Subject: ARM: PL08x: cleanup comments Cleanup the formatting of comments, remove some which don't make sense anymore. Signed-off-by: Russell King [fix conflict with 96a608a4] Signed-off-by: Dan Williams --- drivers/dma/amba-pl08x.c | 146 +++++++++++++++++------------------------------ 1 file changed, 52 insertions(+), 94 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index bebc678ed4fc..297f48b0cba9 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -19,14 +19,14 @@ * this program; if not, write to the Free Software Foundation, Inc., 59 * Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * The full GNU General Public License is in this distribution in the - * file called COPYING. + * The full GNU General Public License is in this distribution in the file + * called COPYING. * * Documentation: ARM DDI 0196G == PL080 - * Documentation: ARM DDI 0218E == PL081 + * Documentation: ARM DDI 0218E == PL081 * - * PL080 & PL081 both have 16 sets of DMA signals that can be routed to - * any channel. + * PL080 & PL081 both have 16 sets of DMA signals that can be routed to any + * channel. * * The PL080 has 8 channels available for simultaneous use, and the PL081 * has only two channels. So on these DMA controllers the number of channels @@ -91,11 +91,9 @@ #define DRIVER_NAME "pl08xdmac" /** - * struct vendor_data - vendor-specific config parameters - * for PL08x derivatives + * struct vendor_data - vendor-specific config parameters for PL08x derivatives * @channels: the number of channels available in this variant - * @dualmaster: whether this version supports dual AHB masters - * or not. + * @dualmaster: whether this version supports dual AHB masters or not. */ struct vendor_data { u8 channels; @@ -241,10 +239,8 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan, * * Disabling individual channels could lose data. * - * Disable the peripheral DMA after disabling the DMAC - * in order to allow the DMAC FIFO to drain, and - * hence allow the channel to show inactive - * + * Disable the peripheral DMA after disabling the DMAC in order to allow + * the DMAC FIFO to drain, and hence allow the channel to show inactive */ static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch) { @@ -367,6 +363,10 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) /* * Allocate a physical channel for a virtual channel + * + * Try to locate a physical channel to be used for this transfer. If all + * are taken return NULL and the requester will have to cope by using + * some fallback PIO mode or retrying later. */ static struct pl08x_phy_chan * pl08x_get_phy_channel(struct pl08x_driver_data *pl08x, @@ -376,12 +376,6 @@ pl08x_get_phy_channel(struct pl08x_driver_data *pl08x, unsigned long flags; int i; - /* - * Try to locate a physical channel to be used for - * this transfer. If all are taken return NULL and - * the requester will have to cope by using some fallback - * PIO mode or retrying later. - */ for (i = 0; i < pl08x->vd->channels; i++) { ch = &pl08x->phy_chans[i]; @@ -495,9 +489,9 @@ struct pl08x_lli_build_data { }; /* - * Autoselect a master bus to use for the transfer - * this prefers the destination bus if both available - * if fixed address on one bus the other will be chosen + * Autoselect a master bus to use for the transfer this prefers the + * destination bus if both available if fixed address on one bus the + * other will be chosen */ static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd, struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl) @@ -530,8 +524,7 @@ static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd, } /* - * Fills in one LLI for a certain transfer descriptor - * and advance the counter + * Fills in one LLI for a certain transfer descriptor and advance the counter */ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, int num_llis, int len, u32 cctl) @@ -640,15 +633,11 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, * Choose bus to align to * - prefers destination bus if both available * - if fixed address on one bus chooses other - * - modifies cctl to choose an appropriate master */ pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl); if (txd->len < mbus->buswidth) { - /* - * Less than a bus width available - * - send as single bytes - */ + /* Less than a bus width available - send as single bytes */ while (bd.remainder) { dev_vdbg(&pl08x->adev->dev, "%s single byte LLIs for a transfer of " @@ -659,10 +648,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, total_bytes++; } } else { - /* - * Make one byte LLIs until master bus is aligned - * - slave will then be aligned also - */ + /* Make one byte LLIs until master bus is aligned */ while ((mbus->addr) % (mbus->buswidth)) { dev_vdbg(&pl08x->adev->dev, "%s adjustment lli for less than bus width " @@ -674,7 +660,7 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, } /* - * Master now aligned + * Master now aligned * - if slave is not then we must set its width down */ if (sbus->addr % sbus->buswidth) { @@ -732,10 +718,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, if (lli_len == target_len) { /* - * Can send what we wanted - */ - /* - * Maintain alignment + * Can send what we wanted. + * Maintain alignment */ lli_len = (lli_len/mbus->buswidth) * mbus->buswidth; @@ -743,17 +727,14 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, } else { /* * So now we know how many bytes to transfer - * to get to the nearest boundary - * The next LLI will past the boundary - * - however we may be working to a boundary - * on the slave bus - * We need to ensure the master stays aligned + * to get to the nearest boundary. The next + * LLI will past the boundary. However, we + * may be working to a boundary on the slave + * bus. We need to ensure the master stays + * aligned, and that we are working in + * multiples of the bus widths. */ odd_bytes = lli_len % mbus->buswidth; - /* - * - and that we are working in multiples - * of the bus widths - */ lli_len -= odd_bytes; } @@ -793,8 +774,8 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, if (odd_bytes) { /* - * Creep past the boundary, - * maintaining master alignment + * Creep past the boundary, maintaining + * master alignment */ int j; for (j = 0; (j < mbus->buswidth) @@ -837,13 +818,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, } llis_va = txd->llis_va; - /* - * The final LLI terminates the LLI. - */ + /* The final LLI terminates the LLI. */ llis_va[num_llis - 1].lli = 0; - /* - * The final LLI element shall also fire an interrupt - */ + /* The final LLI element shall also fire an interrupt. */ llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN; #ifdef VERBOSE_DEBUG @@ -891,7 +868,6 @@ static void pl08x_free_txd_list(struct pl08x_driver_data *pl08x, list_del(&txdi->node); pl08x_free_txd(pl08x, txdi); } - } } @@ -1020,10 +996,9 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt( } /* - * Code accessing dma_async_is_complete() in a tight loop - * may give problems - could schedule where indicated. - * If slaves are relying on interrupts to signal completion this - * function must not be called with interrupts disabled + * Code accessing dma_async_is_complete() in a tight loop may give problems. + * If slaves are relying on interrupts to signal completion this function + * must not be called with interrupts disabled. */ static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan, @@ -1045,10 +1020,6 @@ pl08x_dma_tx_status(struct dma_chan *chan, return ret; } - /* - * schedule(); could be inserted here - */ - /* * This cookie not complete yet */ @@ -1273,11 +1244,10 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, } } else /* - * Else we're all set, paused and ready to roll, - * status will switch to PL08X_CHAN_RUNNING when - * we call issue_pending(). If there is something - * running on the channel already we don't change - * its state. + * Else we're all set, paused and ready to roll, status + * will switch to PL08X_CHAN_RUNNING when we call + * issue_pending(). If there is something running on the + * channel already we don't change its state. */ if (plchan->state == PL08X_CHAN_IDLE) plchan->state = PL08X_CHAN_PAUSED; @@ -1528,10 +1498,9 @@ bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) /* * Just check that the device is there and active - * TODO: turn this bit on/off depending on the number of - * physical channels actually used, if it is zero... well - * shut it off. That will save some power. Cut the clock - * at the same time. + * TODO: turn this bit on/off depending on the number of physical channels + * actually used, if it is zero... well shut it off. That will save some + * power. Cut the clock at the same time. */ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) { @@ -1579,16 +1548,11 @@ static void pl08x_tasklet(unsigned long data) plchan->at = NULL; if (txd) { - /* - * Update last completed - */ + /* Update last completed */ plchan->lc = txd->tx.cookie; } - /* - * If a new descriptor is queued, set it up - * plchan->at is NULL here - */ + /* If a new descriptor is queued, set it up plchan->at is NULL here */ if (!list_empty(&plchan->pend_list)) { struct pl08x_txd *next; @@ -1615,11 +1579,10 @@ static void pl08x_tasklet(unsigned long data) plchan->state = PL08X_CHAN_IDLE; /* - * And NOW before anyone else can grab that free:d - * up physical channel, see if there is some memcpy - * pending that seriously needs to start because of - * being stacked up while we were choking the - * physical channels with data. + * And NOW before anyone else can grab that free:d up + * physical channel, see if there is some memcpy pending + * that seriously needs to start because of being stacked + * up while we were choking the physical channels with data. */ list_for_each_entry(waiting, &pl08x->memcpy.channels, chan.device_node) { @@ -1670,9 +1633,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev) val = readl(pl08x->base + PL080_ERR_STATUS); if (val) { - /* - * An error interrupt (on one or more channels) - */ + /* An error interrupt (on one or more channels) */ dev_err(&pl08x->adev->dev, "%s error interrupt, register value 0x%08x\n", __func__, val); @@ -1696,9 +1657,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev) mask |= (1 << i); } } - /* - * Clear only the terminal interrupts on channels we processed - */ + /* Clear only the terminal interrupts on channels we processed */ writel(mask, pl08x->base + PL080_TC_CLEAR); return mask ? IRQ_HANDLED : IRQ_NONE; @@ -1717,6 +1676,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, int i; INIT_LIST_HEAD(&dmadev->channels); + /* * Register as many many memcpy as we have physical channels, * we won't always be able to use all but the code will have @@ -1950,9 +1910,7 @@ static int pl08x_probe(struct amba_device *adev, struct amba_id *id) /* Turn on the PL08x */ pl08x_ensure_on(pl08x); - /* - * Attach the interrupt handler - */ + /* Attach the interrupt handler */ writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR); writel(0x000000FF, pl08x->base + PL080_TC_CLEAR); -- cgit v1.2.1 From e78bf5e6cbe837daa6ab628a5f679548742994d3 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 16 Jan 2011 16:55:23 -0800 Subject: drivers/nfc/pn544.c: fix min_t warnings Fix these: drivers/nfc/pn544.c: In function 'pn544_read': drivers/nfc/pn544.c:356: warning: comparison of distinct pointer types lacks a cast drivers/nfc/pn544.c:377: warning: comparison of distinct pointer types lacks a cast drivers/nfc/pn544.c: In function 'pn544_write': drivers/nfc/pn544.c:463: warning: comparison of distinct pointer types lacks a cast drivers/nfc/pn544.c:485: warning: comparison of distinct pointer types lacks a cast Cc: "Matti J. Aaltonen" Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/nfc/pn544.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nfc/pn544.c b/drivers/nfc/pn544.c index 401c44b6eadb..bae647264dd6 100644 --- a/drivers/nfc/pn544.c +++ b/drivers/nfc/pn544.c @@ -69,7 +69,7 @@ struct pn544_info { struct mutex read_mutex; /* Serialize read_irq access */ struct mutex mutex; /* Serialize info struct access */ u8 *buf; - unsigned int buflen; + size_t buflen; }; static const char reg_vdd_io[] = "Vdd_IO"; -- cgit v1.2.1 From c693931d93facab671bafdcebf515520663c22fc Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 11 Jan 2011 14:23:12 +1000 Subject: drm/nv40: make detection of 0x4097-ful chipsets available everywhere Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drv.h | 14 ++++++++++++++ drivers/gpu/drm/nouveau/nv40_graph.c | 3 +-- drivers/gpu/drm/nouveau/nv40_grctx.c | 21 +++++---------------- 3 files changed, 20 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 6d749b792088..07a7e6ad5e3b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -1574,6 +1574,20 @@ nv_match_device(struct drm_device *dev, unsigned device, dev->pdev->subsystem_device == sub_device; } +/* returns 1 if device is one of the nv4x using the 0x4497 object class, + * helpful to determine a number of other hardware features + */ +static inline int +nv44_graph_class(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + + if ((dev_priv->chipset & 0xf0) == 0x60) + return 1; + + return !(0x0baf & (1 << (dev_priv->chipset & 0x0f))); +} + /* memory type/access flags, do not match hardware values */ #define NV_MEM_ACCESS_RO 1 #define NV_MEM_ACCESS_WO 2 diff --git a/drivers/gpu/drm/nouveau/nv40_graph.c b/drivers/gpu/drm/nouveau/nv40_graph.c index 19ef92a0375a..8870d72388c8 100644 --- a/drivers/gpu/drm/nouveau/nv40_graph.c +++ b/drivers/gpu/drm/nouveau/nv40_graph.c @@ -451,8 +451,7 @@ nv40_graph_register(struct drm_device *dev) NVOBJ_CLASS(dev, 0x309e, GR); /* swzsurf */ /* curie */ - if (dev_priv->chipset >= 0x60 || - 0x00005450 & (1 << (dev_priv->chipset & 0x0f))) + if (nv44_graph_class(dev)) NVOBJ_CLASS(dev, 0x4497, GR); else NVOBJ_CLASS(dev, 0x4097, GR); diff --git a/drivers/gpu/drm/nouveau/nv40_grctx.c b/drivers/gpu/drm/nouveau/nv40_grctx.c index ce585093264e..f70447d131d7 100644 --- a/drivers/gpu/drm/nouveau/nv40_grctx.c +++ b/drivers/gpu/drm/nouveau/nv40_grctx.c @@ -117,17 +117,6 @@ * - get vs count from 0x1540 */ -static int -nv40_graph_4097(struct drm_device *dev) -{ - struct drm_nouveau_private *dev_priv = dev->dev_private; - - if ((dev_priv->chipset & 0xf0) == 0x60) - return 0; - - return !!(0x0baf & (1 << dev_priv->chipset)); -} - static int nv40_graph_vs_count(struct drm_device *dev) { @@ -219,7 +208,7 @@ nv40_graph_construct_general(struct nouveau_grctx *ctx) gr_def(ctx, 0x4009dc, 0x80000000); } else { cp_ctx(ctx, 0x400840, 20); - if (!nv40_graph_4097(ctx->dev)) { + if (nv44_graph_class(ctx->dev)) { for (i = 0; i < 8; i++) gr_def(ctx, 0x400860 + (i * 4), 0x00000001); } @@ -228,7 +217,7 @@ nv40_graph_construct_general(struct nouveau_grctx *ctx) gr_def(ctx, 0x400888, 0x00000040); cp_ctx(ctx, 0x400894, 11); gr_def(ctx, 0x400894, 0x00000040); - if (nv40_graph_4097(ctx->dev)) { + if (!nv44_graph_class(ctx->dev)) { for (i = 0; i < 8; i++) gr_def(ctx, 0x4008a0 + (i * 4), 0x80000000); } @@ -546,7 +535,7 @@ nv40_graph_construct_state3d_2(struct nouveau_grctx *ctx) static void nv40_graph_construct_state3d_3(struct nouveau_grctx *ctx) { - int len = nv40_graph_4097(ctx->dev) ? 0x0684 : 0x0084; + int len = nv44_graph_class(ctx->dev) ? 0x0084 : 0x0684; cp_out (ctx, 0x300000); cp_lsr (ctx, len - 4); @@ -582,11 +571,11 @@ nv40_graph_construct_shader(struct nouveau_grctx *ctx) } else { b0_offset = 0x1d40/4; /* 2200 */ b1_offset = 0x3f40/4; /* 0b00 : 0a40 */ - vs_len = nv40_graph_4097(dev) ? 0x4a40/4 : 0x4980/4; + vs_len = nv44_graph_class(dev) ? 0x4980/4 : 0x4a40/4; } cp_lsr(ctx, vs_len * vs_nr + 0x300/4); - cp_out(ctx, nv40_graph_4097(dev) ? 0x800041 : 0x800029); + cp_out(ctx, nv44_graph_class(dev) ? 0x800029 : 0x800041); offset = ctx->ctxvals_pos; ctx->ctxvals_pos += (0x0300/4 + (vs_nr * vs_len)); -- cgit v1.2.1 From 1380da4979728bdd6af0086a8c8e186da14ae673 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 11 Jan 2011 17:22:33 +1000 Subject: drm/nv40: initialise 0x17xx on all chipsets that have it Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv40_mc.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nv40_mc.c b/drivers/gpu/drm/nouveau/nv40_mc.c index e4e72c12ab6a..03c0d4c3f355 100644 --- a/drivers/gpu/drm/nouveau/nv40_mc.c +++ b/drivers/gpu/drm/nouveau/nv40_mc.c @@ -6,27 +6,17 @@ int nv40_mc_init(struct drm_device *dev) { - struct drm_nouveau_private *dev_priv = dev->dev_private; - uint32_t tmp; - /* Power up everything, resetting each individual unit will * be done later if needed. */ nv_wr32(dev, NV03_PMC_ENABLE, 0xFFFFFFFF); - switch (dev_priv->chipset) { - case 0x44: - case 0x46: /* G72 */ - case 0x4e: - case 0x4c: /* C51_G7X */ - tmp = nv_rd32(dev, NV04_PFB_FIFO_DATA); + if (nv44_graph_class(dev)) { + u32 tmp = nv_rd32(dev, NV04_PFB_FIFO_DATA); nv_wr32(dev, NV40_PMC_1700, tmp); nv_wr32(dev, NV40_PMC_1704, 0); nv_wr32(dev, NV40_PMC_1708, 0); nv_wr32(dev, NV40_PMC_170C, tmp); - break; - default: - break; } return 0; -- cgit v1.2.1 From c906ca0fbf237b77ba2101a2fa9050317137fde8 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 14 Jan 2011 10:27:02 +1000 Subject: drm/nvc0: enable protection of system-use-only structures in vm Somehow missed this in the original merge of the nvc0 code. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drv.h | 1 + drivers/gpu/drm/nouveau/nv50_instmem.c | 7 +++++-- drivers/gpu/drm/nouveau/nvc0_graph.c | 3 ++- drivers/gpu/drm/nouveau/nvc0_vm.c | 4 ++-- 4 files changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 07a7e6ad5e3b..51920321d058 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -160,6 +160,7 @@ enum nouveau_flags { #define NVOBJ_FLAG_ZERO_ALLOC (1 << 1) #define NVOBJ_FLAG_ZERO_FREE (1 << 2) #define NVOBJ_FLAG_VM (1 << 3) +#define NVOBJ_FLAG_VM_USER (1 << 4) #define NVOBJ_CINST_GLOBAL 0xdeadbeef diff --git a/drivers/gpu/drm/nouveau/nv50_instmem.c b/drivers/gpu/drm/nouveau/nv50_instmem.c index 2e1b1cd19a4b..ea0041810ae3 100644 --- a/drivers/gpu/drm/nouveau/nv50_instmem.c +++ b/drivers/gpu/drm/nouveau/nv50_instmem.c @@ -332,8 +332,11 @@ nv50_instmem_get(struct nouveau_gpuobj *gpuobj, u32 size, u32 align) gpuobj->vinst = node->vram->offset; if (gpuobj->flags & NVOBJ_FLAG_VM) { - ret = nouveau_vm_get(dev_priv->chan_vm, size, 12, - NV_MEM_ACCESS_RW | NV_MEM_ACCESS_SYS, + u32 flags = NV_MEM_ACCESS_RW; + if (!(gpuobj->flags & NVOBJ_FLAG_VM_USER)) + flags |= NV_MEM_ACCESS_SYS; + + ret = nouveau_vm_get(dev_priv->chan_vm, size, 12, flags, &node->chan_vma); if (ret) { vram->put(dev, &node->vram); diff --git a/drivers/gpu/drm/nouveau/nvc0_graph.c b/drivers/gpu/drm/nouveau/nvc0_graph.c index 5feacd5d5fa4..e6ea7d83187f 100644 --- a/drivers/gpu/drm/nouveau/nvc0_graph.c +++ b/drivers/gpu/drm/nouveau/nvc0_graph.c @@ -105,7 +105,8 @@ nvc0_graph_create_context_mmio_list(struct nouveau_channel *chan) if (ret) return ret; - ret = nouveau_gpuobj_new(dev, NULL, 384 * 1024, 4096, NVOBJ_FLAG_VM, + ret = nouveau_gpuobj_new(dev, NULL, 384 * 1024, 4096, + NVOBJ_FLAG_VM | NVOBJ_FLAG_VM_USER, &grch->unk418810); if (ret) return ret; diff --git a/drivers/gpu/drm/nouveau/nvc0_vm.c b/drivers/gpu/drm/nouveau/nvc0_vm.c index 4b9251bb0ff4..e4e83c2caf5b 100644 --- a/drivers/gpu/drm/nouveau/nvc0_vm.c +++ b/drivers/gpu/drm/nouveau/nvc0_vm.c @@ -48,8 +48,8 @@ nvc0_vm_addr(struct nouveau_vma *vma, u64 phys, u32 memtype, u32 target) phys >>= 8; phys |= 0x00000001; /* present */ -// if (vma->access & NV_MEM_ACCESS_SYS) -// phys |= 0x00000002; + if (vma->access & NV_MEM_ACCESS_SYS) + phys |= 0x00000002; phys |= ((u64)target << 32); phys |= ((u64)memtype << 36); -- cgit v1.2.1 From 8b464bfed674fc25d39d8a686010ebe509c8f62a Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 14 Jan 2011 15:46:30 +1000 Subject: drm/nouveau: greatly simplify mm, killing some bugs in the process Reviewed-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_mem.c | 26 ++--- drivers/gpu/drm/nouveau/nouveau_mm.c | 182 ++++++++-------------------------- drivers/gpu/drm/nouveau/nouveau_mm.h | 4 +- 3 files changed, 52 insertions(+), 160 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c index 69044eb104bb..26347b7cd872 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mem.c +++ b/drivers/gpu/drm/nouveau/nouveau_mem.c @@ -742,30 +742,24 @@ nouveau_vram_manager_debug(struct ttm_mem_type_manager *man, const char *prefix) { struct nouveau_mm *mm = man->priv; struct nouveau_mm_node *r; - u64 total = 0, ttotal[3] = {}, tused[3] = {}, tfree[3] = {}; - int i; + u32 total = 0, free = 0; mutex_lock(&mm->mutex); list_for_each_entry(r, &mm->nodes, nl_entry) { - printk(KERN_DEBUG "%s %s-%d: 0x%010llx 0x%010llx\n", - prefix, r->free ? "free" : "used", r->type, - ((u64)r->offset << 12), + printk(KERN_DEBUG "%s %d: 0x%010llx 0x%010llx\n", + prefix, r->type, ((u64)r->offset << 12), (((u64)r->offset + r->length) << 12)); + total += r->length; - ttotal[r->type] += r->length; - if (r->free) - tfree[r->type] += r->length; - else - tused[r->type] += r->length; + if (!r->type) + free += r->length; } mutex_unlock(&mm->mutex); - printk(KERN_DEBUG "%s total: 0x%010llx\n", prefix, total << 12); - for (i = 0; i < 3; i++) { - printk(KERN_DEBUG "%s type %d: 0x%010llx, " - "used 0x%010llx, free 0x%010llx\n", prefix, - i, ttotal[i] << 12, tused[i] << 12, tfree[i] << 12); - } + printk(KERN_DEBUG "%s total: 0x%010llx free: 0x%010llx\n", + prefix, (u64)total << 12, (u64)free << 12); + printk(KERN_DEBUG "%s block: 0x%08x\n", + prefix, mm->block_size << 12); } const struct ttm_mem_type_manager_func nouveau_vram_manager = { diff --git a/drivers/gpu/drm/nouveau/nouveau_mm.c b/drivers/gpu/drm/nouveau/nouveau_mm.c index cdbb11eb701b..8844b50c3e54 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mm.c +++ b/drivers/gpu/drm/nouveau/nouveau_mm.c @@ -48,175 +48,76 @@ region_split(struct nouveau_mm *rmm, struct nouveau_mm_node *a, u32 size) b->offset = a->offset; b->length = size; - b->free = a->free; b->type = a->type; a->offset += size; a->length -= size; list_add_tail(&b->nl_entry, &a->nl_entry); - if (b->free) + if (b->type == 0) list_add_tail(&b->fl_entry, &a->fl_entry); return b; } -static struct nouveau_mm_node * -nouveau_mm_merge(struct nouveau_mm *rmm, struct nouveau_mm_node *this) -{ - struct nouveau_mm_node *prev, *next; - - /* try to merge with free adjacent entries of same type */ - prev = list_entry(this->nl_entry.prev, struct nouveau_mm_node, nl_entry); - if (this->nl_entry.prev != &rmm->nodes) { - if (prev->free && prev->type == this->type) { - prev->length += this->length; - region_put(rmm, this); - this = prev; - } - } - - next = list_entry(this->nl_entry.next, struct nouveau_mm_node, nl_entry); - if (this->nl_entry.next != &rmm->nodes) { - if (next->free && next->type == this->type) { - next->offset = this->offset; - next->length += this->length; - region_put(rmm, this); - this = next; - } - } - - return this; -} +#define node(root, dir) ((root)->nl_entry.dir == &rmm->nodes) ? NULL : \ + list_entry((root)->nl_entry.dir, struct nouveau_mm_node, nl_entry) void nouveau_mm_put(struct nouveau_mm *rmm, struct nouveau_mm_node *this) { - u32 block_s, block_l; + struct nouveau_mm_node *prev = node(this, prev); + struct nouveau_mm_node *next = node(this, next); - this->free = true; list_add(&this->fl_entry, &rmm->free); - this = nouveau_mm_merge(rmm, this); - - /* any entirely free blocks now? we'll want to remove typing - * on them now so they can be use for any memory allocation - */ - block_s = roundup(this->offset, rmm->block_size); - if (block_s + rmm->block_size > this->offset + this->length) - return; + this->type = 0; - /* split off any still-typed region at the start */ - if (block_s != this->offset) { - if (!region_split(rmm, this, block_s - this->offset)) - return; + if (prev && prev->type == 0) { + prev->length += this->length; + region_put(rmm, this); + this = prev; } - /* split off the soon-to-be-untyped block(s) */ - block_l = rounddown(this->length, rmm->block_size); - if (block_l != this->length) { - this = region_split(rmm, this, block_l); - if (!this) - return; + if (next && next->type == 0) { + next->offset = this->offset; + next->length += this->length; + region_put(rmm, this); } - - /* mark as having no type, and retry merge with any adjacent - * untyped blocks - */ - this->type = 0; - nouveau_mm_merge(rmm, this); } int nouveau_mm_get(struct nouveau_mm *rmm, int type, u32 size, u32 size_nc, u32 align, struct nouveau_mm_node **pnode) { - struct nouveau_mm_node *this, *tmp, *next; - u32 splitoff, avail, alloc; - - list_for_each_entry_safe(this, tmp, &rmm->free, fl_entry) { - next = list_entry(this->nl_entry.next, struct nouveau_mm_node, nl_entry); - if (this->nl_entry.next == &rmm->nodes) - next = NULL; - - /* skip wrongly typed blocks */ - if (this->type && this->type != type) + struct nouveau_mm_node *prev, *this, *next; + u32 min = size_nc ? size_nc : size; + u32 align_mask = align - 1; + u32 splitoff; + u32 s, e; + + list_for_each_entry(this, &rmm->free, fl_entry) { + e = this->offset + this->length; + s = this->offset; + + prev = node(this, prev); + if (prev && prev->type != type) + s = roundup(s, rmm->block_size); + + next = node(this, next); + if (next && next->type != type) + e = rounddown(e, rmm->block_size); + + s = (s + align_mask) & ~align_mask; + e &= ~align_mask; + if (s > e || e - s < min) continue; - /* account for alignment */ - splitoff = this->offset & (align - 1); - if (splitoff) - splitoff = align - splitoff; - - if (this->length <= splitoff) - continue; - - /* determine total memory available from this, and - * the next block (if appropriate) - */ - avail = this->length; - if (next && next->free && (!next->type || next->type == type)) - avail += next->length; - - avail -= splitoff; - - /* determine allocation size */ - if (size_nc) { - alloc = min(avail, size); - alloc = rounddown(alloc, size_nc); - if (alloc == 0) - continue; - } else { - alloc = size; - if (avail < alloc) - continue; - } - - /* untyped block, split off a chunk that's a multiple - * of block_size and type it - */ - if (!this->type) { - u32 block = roundup(alloc + splitoff, rmm->block_size); - if (this->length < block) - continue; - - this = region_split(rmm, this, block); - if (!this) - return -ENOMEM; - - this->type = type; - } - - /* stealing memory from adjacent block */ - if (alloc > this->length) { - u32 amount = alloc - (this->length - splitoff); - - if (!next->type) { - amount = roundup(amount, rmm->block_size); - - next = region_split(rmm, next, amount); - if (!next) - return -ENOMEM; - - next->type = type; - } - - this->length += amount; - next->offset += amount; - next->length -= amount; - if (!next->length) { - list_del(&next->nl_entry); - list_del(&next->fl_entry); - kfree(next); - } - } - - if (splitoff) { - if (!region_split(rmm, this, splitoff)) - return -ENOMEM; - } + splitoff = s - this->offset; + if (splitoff && !region_split(rmm, this, splitoff)) + return -ENOMEM; - this = region_split(rmm, this, alloc); - if (this == NULL) + this = region_split(rmm, this, min(size, e - s)); + if (!this) return -ENOMEM; - this->free = false; + this->type = type; list_del(&this->fl_entry); *pnode = this; return 0; @@ -234,7 +135,6 @@ nouveau_mm_init(struct nouveau_mm **prmm, u32 offset, u32 length, u32 block) heap = kzalloc(sizeof(*heap), GFP_KERNEL); if (!heap) return -ENOMEM; - heap->free = true; heap->offset = roundup(offset, block); heap->length = rounddown(offset + length, block) - heap->offset; diff --git a/drivers/gpu/drm/nouveau/nouveau_mm.h b/drivers/gpu/drm/nouveau/nouveau_mm.h index af3844933036..798eaf39691c 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mm.h +++ b/drivers/gpu/drm/nouveau/nouveau_mm.h @@ -30,9 +30,7 @@ struct nouveau_mm_node { struct list_head fl_entry; struct list_head rl_entry; - bool free; - int type; - + u8 type; u32 offset; u32 length; }; -- cgit v1.2.1 From f01a9720cb149e76155dc6e0e051058450305f4f Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 17 Jan 2011 11:22:38 +1000 Subject: drm/nouveau: fix gpu page faults triggered by plymouthd The switch to separate BAR and channel address spaces made the fbcon memory address calculation incorrect on NV50+ boards, this commit fixes that. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_fbcon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index 326eeda6ad7f..f988362c112e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -352,8 +352,8 @@ nouveau_fbcon_create(struct nouveau_fbdev *nfbdev, FBINFO_HWACCEL_IMAGEBLIT; info->flags |= FBINFO_CAN_FORCE_OUTPUT; info->fbops = &nouveau_fbcon_sw_ops; - info->fix.smem_start = dev->mode_config.fb_base + - (nvbo->bo.mem.start << PAGE_SHIFT); + info->fix.smem_start = nvbo->bo.mem.bus.base + + nvbo->bo.mem.bus.offset; info->fix.smem_len = size; info->screen_base = nvbo_kmap_obj_iovirtual(nouveau_fb->nvbo); -- cgit v1.2.1 From 394d83c17fac2b7bcf05cb99d1e945135767bb6b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 13 Jan 2011 13:55:12 -0500 Subject: drm/radeon/kms: fix typo in evergreen safe reg Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/reg_srcs/evergreen | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/reg_srcs/evergreen b/drivers/gpu/drm/radeon/reg_srcs/evergreen index ac40fd39d787..9177f9191837 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/evergreen +++ b/drivers/gpu/drm/radeon/reg_srcs/evergreen @@ -439,7 +439,7 @@ evergreen 0x9400 0x000286EC SPI_COMPUTE_NUM_THREAD_X 0x000286F0 SPI_COMPUTE_NUM_THREAD_Y 0x000286F4 SPI_COMPUTE_NUM_THREAD_Z -0x000286F8 GDS_ADDR_SIZE +0x00028724 GDS_ADDR_SIZE 0x00028780 CB_BLEND0_CONTROL 0x00028784 CB_BLEND1_CONTROL 0x00028788 CB_BLEND2_CONTROL -- cgit v1.2.1 From d42dd579ac1498e23f29465225fa3eee4520f5e5 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 12 Jan 2011 20:05:11 -0500 Subject: drm/radeon/kms: add module option for pcie gen2 Switching to pcie gen2 causes problems on some boards. Add a module option to turn it on/off. There are gen2 compatability issues with some motherboards it seems. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=33027 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen.c | 3 +++ drivers/gpu/drm/radeon/r600.c | 3 +++ drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/radeon_drv.c | 4 ++++ drivers/gpu/drm/radeon/rv770.c | 3 +++ 5 files changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 7fe8ebdcdc0e..e201a88caf59 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3158,6 +3158,9 @@ static void evergreen_pcie_gen2_enable(struct radeon_device *rdev) { u32 link_width_cntl, speed_cntl; + if (radeon_pcie_gen2 == 0) + return; + if (rdev->flags & RADEON_IS_IGP) return; diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 6b50716267c0..9fe86253cfcd 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -3658,6 +3658,9 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev) u32 link_width_cntl, lanes, speed_cntl, training_cntl, tmp; u16 link_cntl2; + if (radeon_pcie_gen2 == 0) + return; + if (rdev->flags & RADEON_IS_IGP) return; diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index e9486630a467..71d2a554bbe6 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -92,6 +92,7 @@ extern int radeon_tv; extern int radeon_audio; extern int radeon_disp_priority; extern int radeon_hw_i2c; +extern int radeon_pcie_gen2; /* * Copy from radeon_drv.h so we don't have to include both and have conflicting diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index be5cb4f28c29..d5680a0c87af 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -104,6 +104,7 @@ int radeon_tv = 1; int radeon_audio = 1; int radeon_disp_priority = 0; int radeon_hw_i2c = 0; +int radeon_pcie_gen2 = 0; MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers"); module_param_named(no_wb, radeon_no_wb, int, 0444); @@ -147,6 +148,9 @@ module_param_named(disp_priority, radeon_disp_priority, int, 0444); MODULE_PARM_DESC(hw_i2c, "hw i2c engine enable (0 = disable)"); module_param_named(hw_i2c, radeon_hw_i2c, int, 0444); +MODULE_PARM_DESC(pcie_gen2, "PCIE Gen2 mode (1 = enable)"); +module_param_named(pcie_gen2, radeon_pcie_gen2, int, 0444); + static int radeon_suspend(struct drm_device *dev, pm_message_t state) { drm_radeon_private_t *dev_priv = dev->dev_private; diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 3a264aa3a79a..bd9ee90421e4 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -1372,6 +1372,9 @@ static void rv770_pcie_gen2_enable(struct radeon_device *rdev) u32 link_width_cntl, lanes, speed_cntl, tmp; u16 link_cntl2; + if (radeon_pcie_gen2 == 0) + return; + if (rdev->flags & RADEON_IS_IGP) return; -- cgit v1.2.1 From fd909c3718da3fb8c5c0530f93ae21d85dc31471 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 11 Jan 2011 18:08:59 -0500 Subject: drm/radeon/kms: remove duplicate card_posted() functions Use the common one for all asics. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen.c | 27 +-------------------------- drivers/gpu/drm/radeon/r600.c | 20 +------------------- drivers/gpu/drm/radeon/rv770.c | 2 +- 3 files changed, 3 insertions(+), 46 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index e201a88caf59..a8973acb3987 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3002,31 +3002,6 @@ int evergreen_copy_blit(struct radeon_device *rdev, return 0; } -static bool evergreen_card_posted(struct radeon_device *rdev) -{ - u32 reg; - - /* first check CRTCs */ - if (rdev->flags & RADEON_IS_IGP) - reg = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET); - else - reg = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET); - if (reg & EVERGREEN_CRTC_MASTER_EN) - return true; - - /* then check MEM_SIZE, in case the crtcs are off */ - if (RREG32(CONFIG_MEMSIZE)) - return true; - - return false; -} - /* Plan is to move initialization in that function and use * helper function so that radeon_device_init pretty much * do nothing more than calling asic specific function. This @@ -3063,7 +3038,7 @@ int evergreen_init(struct radeon_device *rdev) if (radeon_asic_reset(rdev)) dev_warn(rdev->dev, "GPU reset failed !\n"); /* Post card if necessary */ - if (!evergreen_card_posted(rdev)) { + if (!radeon_card_posted(rdev)) { if (!rdev->bios) { dev_err(rdev->dev, "Card not posted and no BIOS - ignoring\n"); return -EINVAL; diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 9fe86253cfcd..aca2236268fa 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2358,24 +2358,6 @@ void r600_clear_surface_reg(struct radeon_device *rdev, int reg) /* FIXME: implement */ } - -bool r600_card_posted(struct radeon_device *rdev) -{ - uint32_t reg; - - /* first check CRTCs */ - reg = RREG32(D1CRTC_CONTROL) | - RREG32(D2CRTC_CONTROL); - if (reg & CRTC_EN) - return true; - - /* then check MEM_SIZE, in case the crtcs are off */ - if (RREG32(CONFIG_MEMSIZE)) - return true; - - return false; -} - int r600_startup(struct radeon_device *rdev) { int r; @@ -2536,7 +2518,7 @@ int r600_init(struct radeon_device *rdev) if (r) return r; /* Post card if necessary */ - if (!r600_card_posted(rdev)) { + if (!radeon_card_posted(rdev)) { if (!rdev->bios) { dev_err(rdev->dev, "Card not posted and no BIOS - ignoring\n"); return -EINVAL; diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index bd9ee90421e4..491dc9000655 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -1268,7 +1268,7 @@ int rv770_init(struct radeon_device *rdev) if (r) return r; /* Post card if necessary */ - if (!r600_card_posted(rdev)) { + if (!radeon_card_posted(rdev)) { if (!rdev->bios) { dev_err(rdev->dev, "Card not posted and no BIOS - ignoring\n"); return -EINVAL; -- cgit v1.2.1 From 25b2ec5b643c9ea784e5a51e5e9602cd536965f2 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 11 Jan 2011 13:36:55 -0500 Subject: drm/radeon/kms: balance asic_reset functions First, we were calling mc_stop() at the top of the function which turns off all MC (memory controller) clients, then checking if the GPU is idle. If it was idle we returned without re-enabling the MC clients which would lead to a blank screen, etc. This patch checks if the GPU is idle before calling mc_stop(). Second, if the reset failed, we were returning without re-enabling the MC clients. This patch re-enables the MC clients before returning regardless of whether the reset was successful or not. Signed-off-by: Alex Deucher Cc: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 11 ++++++----- drivers/gpu/drm/radeon/r300.c | 11 ++++++----- drivers/gpu/drm/radeon/rs600.c | 16 ++++++++-------- 3 files changed, 20 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index f637595b14e1..46da5142b131 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -2086,12 +2086,13 @@ int r100_asic_reset(struct radeon_device *rdev) { struct r100_mc_save save; u32 status, tmp; + int ret = 0; - r100_mc_stop(rdev, &save); status = RREG32(R_000E40_RBBM_STATUS); if (!G_000E40_GUI_ACTIVE(status)) { return 0; } + r100_mc_stop(rdev, &save); status = RREG32(R_000E40_RBBM_STATUS); dev_info(rdev->dev, "(%s:%d) RBBM_STATUS=0x%08X\n", __func__, __LINE__, status); /* stop CP */ @@ -2131,11 +2132,11 @@ int r100_asic_reset(struct radeon_device *rdev) G_000E40_TAM_BUSY(status) || G_000E40_PB_BUSY(status)) { dev_err(rdev->dev, "failed to reset GPU\n"); rdev->gpu_lockup = true; - return -1; - } + ret = -1; + } else + dev_info(rdev->dev, "GPU reset succeed\n"); r100_mc_resume(rdev, &save); - dev_info(rdev->dev, "GPU reset succeed\n"); - return 0; + return ret; } void r100_set_common_regs(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index fae5e709f270..cf862ca580bf 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -405,12 +405,13 @@ int r300_asic_reset(struct radeon_device *rdev) { struct r100_mc_save save; u32 status, tmp; + int ret = 0; - r100_mc_stop(rdev, &save); status = RREG32(R_000E40_RBBM_STATUS); if (!G_000E40_GUI_ACTIVE(status)) { return 0; } + r100_mc_stop(rdev, &save); status = RREG32(R_000E40_RBBM_STATUS); dev_info(rdev->dev, "(%s:%d) RBBM_STATUS=0x%08X\n", __func__, __LINE__, status); /* stop CP */ @@ -451,11 +452,11 @@ int r300_asic_reset(struct radeon_device *rdev) if (G_000E40_GA_BUSY(status) || G_000E40_VAP_BUSY(status)) { dev_err(rdev->dev, "failed to reset GPU\n"); rdev->gpu_lockup = true; - return -1; - } + ret = -1; + } else + dev_info(rdev->dev, "GPU reset succeed\n"); r100_mc_resume(rdev, &save); - dev_info(rdev->dev, "GPU reset succeed\n"); - return 0; + return ret; } /* diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index b4192acaab5f..5afe294ed51f 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -339,16 +339,16 @@ void rs600_bm_disable(struct radeon_device *rdev) int rs600_asic_reset(struct radeon_device *rdev) { - u32 status, tmp; - struct rv515_mc_save save; + u32 status, tmp; + int ret = 0; - /* Stops all mc clients */ - rv515_mc_stop(rdev, &save); status = RREG32(R_000E40_RBBM_STATUS); if (!G_000E40_GUI_ACTIVE(status)) { return 0; } + /* Stops all mc clients */ + rv515_mc_stop(rdev, &save); status = RREG32(R_000E40_RBBM_STATUS); dev_info(rdev->dev, "(%s:%d) RBBM_STATUS=0x%08X\n", __func__, __LINE__, status); /* stop CP */ @@ -392,11 +392,11 @@ int rs600_asic_reset(struct radeon_device *rdev) if (G_000E40_GA_BUSY(status) || G_000E40_VAP_BUSY(status)) { dev_err(rdev->dev, "failed to reset GPU\n"); rdev->gpu_lockup = true; - return -1; - } + ret = -1; + } else + dev_info(rdev->dev, "GPU reset succeed\n"); rv515_mc_resume(rdev, &save); - dev_info(rdev->dev, "GPU reset succeed\n"); - return 0; + return ret; } /* -- cgit v1.2.1 From f06267104dd9112f11586830d22501d0e26245ea Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 19 Oct 2010 15:24:36 +0000 Subject: RDMA: Update workqueue usage * ib_wq is added, which is used as the common workqueue for infiniband instead of the system workqueue. All system workqueue usages including flush_scheduled_work() callers are converted to use and flush ib_wq. * cancel_delayed_work() + flush_scheduled_work() converted to cancel_delayed_work_sync(). * qib_wq is removed and ib_wq is used instead. This is to prepare for deprecation of flush_scheduled_work(). Signed-off-by: Tejun Heo Signed-off-by: Roland Dreier --- drivers/infiniband/core/cache.c | 4 ++-- drivers/infiniband/core/device.c | 11 +++++++++-- drivers/infiniband/core/sa_query.c | 2 +- drivers/infiniband/core/umem.c | 2 +- drivers/infiniband/hw/ipath/ipath_driver.c | 2 +- drivers/infiniband/hw/ipath/ipath_user_pages.c | 2 +- drivers/infiniband/hw/qib/qib_iba7220.c | 7 +++---- drivers/infiniband/hw/qib/qib_iba7322.c | 14 +++++++------- drivers/infiniband/hw/qib/qib_init.c | 26 ++++---------------------- drivers/infiniband/hw/qib/qib_qsfp.c | 9 ++++----- drivers/infiniband/hw/qib/qib_verbs.h | 3 +-- drivers/infiniband/ulp/srp/ib_srp.c | 4 ++-- 12 files changed, 36 insertions(+), 50 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c index 68883565b725..f9ba7d74dfc0 100644 --- a/drivers/infiniband/core/cache.c +++ b/drivers/infiniband/core/cache.c @@ -308,7 +308,7 @@ static void ib_cache_event(struct ib_event_handler *handler, INIT_WORK(&work->work, ib_cache_task); work->device = event->device; work->port_num = event->element.port_num; - schedule_work(&work->work); + queue_work(ib_wq, &work->work); } } } @@ -368,7 +368,7 @@ static void ib_cache_cleanup_one(struct ib_device *device) int p; ib_unregister_event_handler(&device->cache.event_handler); - flush_scheduled_work(); + flush_workqueue(ib_wq); for (p = 0; p <= end_port(device) - start_port(device); ++p) { kfree(device->cache.pkey_cache[p]); diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c index a19effad0811..f793bf2f5da7 100644 --- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -38,7 +38,6 @@ #include #include #include -#include #include "core_priv.h" @@ -52,6 +51,9 @@ struct ib_client_data { void * data; }; +struct workqueue_struct *ib_wq; +EXPORT_SYMBOL_GPL(ib_wq); + static LIST_HEAD(device_list); static LIST_HEAD(client_list); @@ -718,6 +720,10 @@ static int __init ib_core_init(void) { int ret; + ib_wq = alloc_workqueue("infiniband", 0, 0); + if (!ib_wq) + return -ENOMEM; + ret = ib_sysfs_setup(); if (ret) printk(KERN_WARNING "Couldn't create InfiniBand device class\n"); @@ -726,6 +732,7 @@ static int __init ib_core_init(void) if (ret) { printk(KERN_WARNING "Couldn't set up InfiniBand P_Key/GID cache\n"); ib_sysfs_cleanup(); + destroy_workqueue(ib_wq); } return ret; @@ -736,7 +743,7 @@ static void __exit ib_core_cleanup(void) ib_cache_cleanup(); ib_sysfs_cleanup(); /* Make sure that any pending umem accounting work is done. */ - flush_scheduled_work(); + destroy_workqueue(ib_wq); } module_init(ib_core_init); diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index 91a660310b7c..e38be1bcc01c 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -425,7 +425,7 @@ static void ib_sa_event(struct ib_event_handler *handler, struct ib_event *event port->sm_ah = NULL; spin_unlock_irqrestore(&port->ah_lock, flags); - schedule_work(&sa_dev->port[event->element.port_num - + queue_work(ib_wq, &sa_dev->port[event->element.port_num - sa_dev->start_port].update_task); } } diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c index 415e186eee32..b645e558876f 100644 --- a/drivers/infiniband/core/umem.c +++ b/drivers/infiniband/core/umem.c @@ -262,7 +262,7 @@ void ib_umem_release(struct ib_umem *umem) umem->mm = mm; umem->diff = diff; - schedule_work(&umem->work); + queue_work(ib_wq, &umem->work); return; } } else diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index ae92da2d3f56..47db4bf34628 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -755,7 +755,7 @@ static void __devexit ipath_remove_one(struct pci_dev *pdev) */ ipath_shutdown_device(dd); - flush_scheduled_work(); + flush_workqueue(ib_wq); if (dd->verbs_dev) ipath_unregister_ib_device(dd->verbs_dev); diff --git a/drivers/infiniband/hw/ipath/ipath_user_pages.c b/drivers/infiniband/hw/ipath/ipath_user_pages.c index 5e86d73eba2a..bab9f74c0665 100644 --- a/drivers/infiniband/hw/ipath/ipath_user_pages.c +++ b/drivers/infiniband/hw/ipath/ipath_user_pages.c @@ -220,7 +220,7 @@ void ipath_release_user_pages_on_close(struct page **p, size_t num_pages) work->mm = mm; work->num_pages = num_pages; - schedule_work(&work->work); + queue_work(ib_wq, &work->work); return; bail_mm: diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c index 127a0d5069f0..de799f17cb9e 100644 --- a/drivers/infiniband/hw/qib/qib_iba7220.c +++ b/drivers/infiniband/hw/qib/qib_iba7220.c @@ -1692,8 +1692,7 @@ static void qib_7220_quiet_serdes(struct qib_pportdata *ppd) ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; spin_unlock_irqrestore(&ppd->lflags_lock, flags); wake_up(&ppd->cpspec->autoneg_wait); - cancel_delayed_work(&ppd->cpspec->autoneg_work); - flush_scheduled_work(); + cancel_delayed_work_sync(&ppd->cpspec->autoneg_work); shutdown_7220_relock_poll(ppd->dd); val = qib_read_kreg64(ppd->dd, kr_xgxs_cfg); @@ -3515,8 +3514,8 @@ static void try_7220_autoneg(struct qib_pportdata *ppd) toggle_7220_rclkrls(ppd->dd); /* 2 msec is minimum length of a poll cycle */ - schedule_delayed_work(&ppd->cpspec->autoneg_work, - msecs_to_jiffies(2)); + queue_delayed_work(ib_wq, &ppd->cpspec->autoneg_work, + msecs_to_jiffies(2)); } /* diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index dbbb0e85afe4..ea46fbc34b17 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -2406,10 +2406,9 @@ static void qib_7322_mini_quiet_serdes(struct qib_pportdata *ppd) ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; spin_unlock_irqrestore(&ppd->lflags_lock, flags); wake_up(&ppd->cpspec->autoneg_wait); - cancel_delayed_work(&ppd->cpspec->autoneg_work); + cancel_delayed_work_sync(&ppd->cpspec->autoneg_work); if (ppd->dd->cspec->r1) - cancel_delayed_work(&ppd->cpspec->ipg_work); - flush_scheduled_work(); + cancel_delayed_work_sync(&ppd->cpspec->ipg_work); ppd->cpspec->chase_end = 0; if (ppd->cpspec->chase_timer.data) /* if initted */ @@ -2706,7 +2705,7 @@ static noinline void unknown_7322_gpio_intr(struct qib_devdata *dd) if (!(pins & mask)) { ++handled; qd->t_insert = get_jiffies_64(); - schedule_work(&qd->work); + queue_work(ib_wq, &qd->work); } } } @@ -4990,8 +4989,8 @@ static void try_7322_autoneg(struct qib_pportdata *ppd) set_7322_ibspeed_fast(ppd, QIB_IB_DDR); qib_7322_mini_pcs_reset(ppd); /* 2 msec is minimum length of a poll cycle */ - schedule_delayed_work(&ppd->cpspec->autoneg_work, - msecs_to_jiffies(2)); + queue_delayed_work(ib_wq, &ppd->cpspec->autoneg_work, + msecs_to_jiffies(2)); } /* @@ -5121,7 +5120,8 @@ static void try_7322_ipg(struct qib_pportdata *ppd) ib_free_send_mad(send_buf); retry: delay = 2 << ppd->cpspec->ipg_tries; - schedule_delayed_work(&ppd->cpspec->ipg_work, msecs_to_jiffies(delay)); + queue_delayed_work(ib_wq, &ppd->cpspec->ipg_work, + msecs_to_jiffies(delay)); } /* diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c index 304bd8038541..ffefb78b8949 100644 --- a/drivers/infiniband/hw/qib/qib_init.c +++ b/drivers/infiniband/hw/qib/qib_init.c @@ -80,7 +80,6 @@ unsigned qib_wc_pat = 1; /* default (1) is to use PAT, not MTRR */ module_param_named(wc_pat, qib_wc_pat, uint, S_IRUGO); MODULE_PARM_DESC(wc_pat, "enable write-combining via PAT mechanism"); -struct workqueue_struct *qib_wq; struct workqueue_struct *qib_cq_wq; static void verify_interrupt(unsigned long); @@ -1044,24 +1043,10 @@ static int __init qlogic_ib_init(void) if (ret) goto bail; - /* - * We create our own workqueue mainly because we want to be - * able to flush it when devices are being removed. We can't - * use schedule_work()/flush_scheduled_work() because both - * unregister_netdev() and linkwatch_event take the rtnl lock, - * so flush_scheduled_work() can deadlock during device - * removal. - */ - qib_wq = create_workqueue("qib"); - if (!qib_wq) { - ret = -ENOMEM; - goto bail_dev; - } - qib_cq_wq = create_singlethread_workqueue("qib_cq"); if (!qib_cq_wq) { ret = -ENOMEM; - goto bail_wq; + goto bail_dev; } /* @@ -1091,8 +1076,6 @@ bail_unit: idr_destroy(&qib_unit_table); bail_cq_wq: destroy_workqueue(qib_cq_wq); -bail_wq: - destroy_workqueue(qib_wq); bail_dev: qib_dev_cleanup(); bail: @@ -1116,7 +1099,6 @@ static void __exit qlogic_ib_cleanup(void) pci_unregister_driver(&qib_driver); - destroy_workqueue(qib_wq); destroy_workqueue(qib_cq_wq); qib_cpulist_count = 0; @@ -1289,7 +1271,7 @@ static int __devinit qib_init_one(struct pci_dev *pdev, if (qib_mini_init || initfail || ret) { qib_stop_timers(dd); - flush_scheduled_work(); + flush_workqueue(ib_wq); for (pidx = 0; pidx < dd->num_pports; ++pidx) dd->f_quiet_serdes(dd->pport + pidx); if (qib_mini_init) @@ -1338,8 +1320,8 @@ static void __devexit qib_remove_one(struct pci_dev *pdev) qib_stop_timers(dd); - /* wait until all of our (qsfp) schedule_work() calls complete */ - flush_scheduled_work(); + /* wait until all of our (qsfp) queue_work() calls complete */ + flush_workqueue(ib_wq); ret = qibfs_remove(dd); if (ret) diff --git a/drivers/infiniband/hw/qib/qib_qsfp.c b/drivers/infiniband/hw/qib/qib_qsfp.c index 35b3604b691d..3374a52232c1 100644 --- a/drivers/infiniband/hw/qib/qib_qsfp.c +++ b/drivers/infiniband/hw/qib/qib_qsfp.c @@ -485,7 +485,7 @@ void qib_qsfp_init(struct qib_qsfp_data *qd, goto bail; /* We see a module, but it may be unwise to look yet. Just schedule */ qd->t_insert = get_jiffies_64(); - schedule_work(&qd->work); + queue_work(ib_wq, &qd->work); bail: return; } @@ -493,10 +493,9 @@ bail: void qib_qsfp_deinit(struct qib_qsfp_data *qd) { /* - * There is nothing to do here for now. our - * work is scheduled with schedule_work(), and - * flush_scheduled_work() from remove_one will - * block until all work ssetup with schedule_work() + * There is nothing to do here for now. our work is scheduled + * with queue_work(), and flush_workqueue() from remove_one + * will block until all work setup with queue_work() * completes. */ } diff --git a/drivers/infiniband/hw/qib/qib_verbs.h b/drivers/infiniband/hw/qib/qib_verbs.h index 63b22a9a7feb..95e5b47223b3 100644 --- a/drivers/infiniband/hw/qib/qib_verbs.h +++ b/drivers/infiniband/hw/qib/qib_verbs.h @@ -805,7 +805,6 @@ static inline int qib_send_ok(struct qib_qp *qp) !(qp->s_flags & QIB_S_ANY_WAIT_SEND)); } -extern struct workqueue_struct *qib_wq; extern struct workqueue_struct *qib_cq_wq; /* @@ -814,7 +813,7 @@ extern struct workqueue_struct *qib_cq_wq; static inline void qib_schedule_send(struct qib_qp *qp) { if (qib_send_ok(qp)) - queue_work(qib_wq, &qp->s_work); + queue_work(ib_wq, &qp->s_work); } static inline int qib_pkey_ok(u16 pkey1, u16 pkey2) diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 4b62105ed1e8..70ecb949683e 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -638,7 +638,7 @@ err: if (target->state == SRP_TARGET_CONNECTING) { target->state = SRP_TARGET_DEAD; INIT_WORK(&target->work, srp_remove_work); - schedule_work(&target->work); + queue_work(ib_wq, &target->work); } spin_unlock_irq(&target->lock); @@ -2199,7 +2199,7 @@ static void srp_remove_one(struct ib_device *device) * started before we marked our target ports as * removed, and any target port removal tasks. */ - flush_scheduled_work(); + flush_workqueue(ib_wq); list_for_each_entry_safe(target, tmp_target, &host->target_list, list) { -- cgit v1.2.1 From eb745dbccce56f1bbe3f80b95ad2a325145171c2 Mon Sep 17 00:00:00 2001 From: Yang Ruirui Date: Fri, 14 Jan 2011 15:51:04 +0800 Subject: staging: smbfs building fix Building error for smbfs: drivers/staging/smbfs/dir.c:286: error: static declaration of 'smbfs_dentry_operations' follows non-static declaration drivers/staging/smbfs/proto.h:42: error: previous declaration of 'smbfs_dentry_operations' was here drivers/staging/smbfs/dir.c:294: error: static declaration of 'smbfs_dentry_operations_case' follows non-static declaration drivers/staging/smbfs/proto.h:41: error: previous declaration of 'smbfs_dentry_operations_case' was here make[3]: *** [drivers/staging/smbfs/dir.o] Error 1 make[2]: *** [drivers/staging/smbfs] Error 2 make[1]: *** [drivers/staging] Error 2 make[1]: *** Waiting for unfinished jobs.... Fix it by removing static keywords Signed-off-by: Yang Ruirui Signed-off-by: Al Viro --- drivers/staging/smbfs/dir.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/smbfs/dir.c b/drivers/staging/smbfs/dir.c index 87a3a9bd5842..f204d33910ec 100644 --- a/drivers/staging/smbfs/dir.c +++ b/drivers/staging/smbfs/dir.c @@ -283,7 +283,7 @@ static int smb_compare_dentry(const struct dentry *, unsigned int, const char *, const struct qstr *); static int smb_delete_dentry(const struct dentry *); -static const struct dentry_operations smbfs_dentry_operations = +const struct dentry_operations smbfs_dentry_operations = { .d_revalidate = smb_lookup_validate, .d_hash = smb_hash_dentry, @@ -291,7 +291,7 @@ static const struct dentry_operations smbfs_dentry_operations = .d_delete = smb_delete_dentry, }; -static const struct dentry_operations smbfs_dentry_operations_case = +const struct dentry_operations smbfs_dentry_operations_case = { .d_revalidate = smb_lookup_validate, .d_delete = smb_delete_dentry, -- cgit v1.2.1 From 154bf89f5e3e3dc59666926f27ca4a0866f39157 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Sun, 16 Jan 2011 17:50:54 +0200 Subject: mtd: mtdpart: disallow reading OOB past the end of the partition This patch fixes the mtdpart bug which allows users reading OOB past the end of the partition. This happens because 'part_read_oob()' allows reading multiple OOB areas in one go, and mtdparts does not validate the OOB length in the request. Although there is such check in 'nand_do_read_oob()' in nand_base.c, but it checks that we do not read past the flash chip, not the partition, because in nand_base.c we work with the whole chip (e.g., mtd->size in nand_base.c is the size of the whole chip). So this check cannot be done correctly in nand_base.c and should be instead done in mtdparts.c. This problem was reported by Jason Liu and reproduced with nandsim: $ modprobe nandsim first_id_byte=0x20 second_id_byte=0xaa third_id_byte=0x00 \ fourth_id_byte=0x15 parts=0x400,0x400 $ modprobe nandsim mtd_oobtest.ko dev=0 $ dmesg = snip = mtd_oobtest: attempting to read past end of device mtd_oobtest: an error is expected... mtd_oobtest: error: read past end of device = snip = mtd_oobtest: finished with 2 errors Reported-by: Jason Liu Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdpart.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index b910a37baed8..0a4760174782 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -120,8 +120,25 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from, return -EINVAL; if (ops->datbuf && from + ops->len > mtd->size) return -EINVAL; - res = part->master->read_oob(part->master, from + part->offset, ops); + /* + * If OOB is also requested, make sure that we do not read past the end + * of this partition. + */ + if (ops->oobbuf) { + size_t len, pages; + + if (ops->mode == MTD_OOB_AUTO) + len = mtd->oobavail; + else + len = mtd->oobsize; + pages = mtd_div_by_ws(mtd->size, mtd); + pages -= mtd_div_by_ws(from, mtd); + if (ops->ooboffs + ops->ooblen > pages * len) + return -EINVAL; + } + + res = part->master->read_oob(part->master, from + part->offset, ops); if (unlikely(res)) { if (res == -EUCLEAN) mtd->ecc_stats.corrected++; -- cgit v1.2.1 From d95defaca7994ffff1ceb52f3011eb644dfe3274 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 17 Jan 2011 17:01:07 +0100 Subject: spi/spi_sh_msiof: fix a wrong free_irq() parameter Without this fix reloading of the driver is impossible. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Grant Likely --- drivers/spi/spi_sh_msiof.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi_sh_msiof.c b/drivers/spi/spi_sh_msiof.c index d93b66743ba7..56f60c8ea0ab 100644 --- a/drivers/spi/spi_sh_msiof.c +++ b/drivers/spi/spi_sh_msiof.c @@ -635,7 +635,7 @@ static int sh_msiof_spi_remove(struct platform_device *pdev) ret = spi_bitbang_stop(&p->bitbang); if (!ret) { pm_runtime_disable(&pdev->dev); - free_irq(platform_get_irq(pdev, 0), sh_msiof_spi_irq); + free_irq(platform_get_irq(pdev, 0), p); iounmap(p->mapbase); clk_put(p->clk); spi_master_put(p->bitbang.master); -- cgit v1.2.1 From 58c5296991d233f2e492aa7a884635bba478cf12 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 13 Jan 2011 18:19:29 -0800 Subject: ath9k_hw: ASPM interoperability fix for AR9380/AR9382 There is an interoperability with AR9382/AR9380 in L1 state with a few root complexes which can cause a hang. This is fixed by setting some work around bits on the PCIE PHY. We fix by using a new ini array to modify these bits when the radio is idle. Cc: stable@kernel.org Cc: Jack Lee Cc: Carl Huang Cc: David Quan Cc: Nael Atallah Cc: Sarvesh Shrivastava Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h | 2 +- drivers/net/wireless/ath/ath9k/ar9003_hw.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h index 81f9cf294dec..9ecca93392e8 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h @@ -1842,7 +1842,7 @@ static const u32 ar9300_2p2_soc_preamble[][2] = { static const u32 ar9300PciePhy_pll_on_clkreq_disable_L1_2p2[][2] = { /* Addr allmodes */ - {0x00004040, 0x08212e5e}, + {0x00004040, 0x0821265e}, {0x00004040, 0x0008003b}, {0x00004044, 0x00000000}, }; diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c index 6137634e46ca..06fb2c850535 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c @@ -146,8 +146,8 @@ static void ar9003_hw_init_mode_regs(struct ath_hw *ah) /* Sleep Setting */ INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower, - ar9300PciePhy_clkreq_enable_L1_2p2, - ARRAY_SIZE(ar9300PciePhy_clkreq_enable_L1_2p2), + ar9300PciePhy_pll_on_clkreq_disable_L1_2p2, + ARRAY_SIZE(ar9300PciePhy_pll_on_clkreq_disable_L1_2p2), 2); /* Fast clock modal settings */ -- cgit v1.2.1 From dc738cb6c5d5594de4bdf3b7839a250b032152e7 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Sun, 16 Jan 2011 10:56:37 +0530 Subject: ath9k_htc: Fix endian issue in tx header Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc.h | 2 +- drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 8 +++++--- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h index 1ce506f23110..780ac5eac501 100644 --- a/drivers/net/wireless/ath/ath9k/htc.h +++ b/drivers/net/wireless/ath/ath9k/htc.h @@ -78,7 +78,7 @@ struct tx_frame_hdr { u8 node_idx; u8 vif_idx; u8 tidno; - u32 flags; /* ATH9K_HTC_TX_* */ + __be32 flags; /* ATH9K_HTC_TX_* */ u8 key_type; u8 keyix; u8 reserved[26]; diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c index 33f36029fa4f..7a5ffca21958 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c @@ -113,6 +113,7 @@ int ath9k_htc_tx_start(struct ath9k_htc_priv *priv, struct sk_buff *skb) if (ieee80211_is_data(fc)) { struct tx_frame_hdr tx_hdr; + u32 flags = 0; u8 *qc; memset(&tx_hdr, 0, sizeof(struct tx_frame_hdr)); @@ -136,13 +137,14 @@ int ath9k_htc_tx_start(struct ath9k_htc_priv *priv, struct sk_buff *skb) /* Check for RTS protection */ if (priv->hw->wiphy->rts_threshold != (u32) -1) if (skb->len > priv->hw->wiphy->rts_threshold) - tx_hdr.flags |= ATH9K_HTC_TX_RTSCTS; + flags |= ATH9K_HTC_TX_RTSCTS; /* CTS-to-self */ - if (!(tx_hdr.flags & ATH9K_HTC_TX_RTSCTS) && + if (!(flags & ATH9K_HTC_TX_RTSCTS) && (priv->op_flags & OP_PROTECT_ENABLE)) - tx_hdr.flags |= ATH9K_HTC_TX_CTSONLY; + flags |= ATH9K_HTC_TX_CTSONLY; + tx_hdr.flags = cpu_to_be32(flags); tx_hdr.key_type = ath9k_cmn_get_hw_crypto_keytype(skb); if (tx_hdr.key_type == ATH9K_KEY_TYPE_CLEAR) tx_hdr.keyix = (u8) ATH9K_TXKEYIX_INVALID; -- cgit v1.2.1 From 811ea256b30b37091b5bbf41517404cf98ab56c1 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Mon, 17 Jan 2011 15:21:40 +0530 Subject: ath9k_hw: do PA offset calibration only on longcal interval The power detector adc offset calibration has to be done on 4 minutes interval (longcal * pa_skip_count). But the commit "ath9k_hw: fix a noise floor calibration related race condition" makes the PA calibration executed more frequently beased on nfcal_pending value. Running PAOffset calibration lesser than longcal interval doesn't help anything and the worse part is that it causes NF load timeouts and RX deaf conditions. In a very noisy environment, where the distance b/w AP & station is ~10 meter and running a downlink udp traffic with frequent background scan causes "Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x40d1a" and moves the chip into deaf state. This issue was originaly reported in Android platform where the network-manager application does bgscan more frequently on AR9271 chips. (AR9285 family usb device). Cc: stable@kernel.org Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_calib.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c index ea2e7d714bda..5e300bd3d264 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c @@ -679,10 +679,6 @@ static bool ar9002_hw_calibrate(struct ath_hw *ah, /* Do NF cal only at longer intervals */ if (longcal || nfcal_pending) { - /* Do periodic PAOffset Cal */ - ar9002_hw_pa_cal(ah, false); - ar9002_hw_olc_temp_compensation(ah); - /* * Get the value from the previous NF cal and update * history buffer. @@ -697,8 +693,12 @@ static bool ar9002_hw_calibrate(struct ath_hw *ah, ath9k_hw_loadnf(ah, ah->curchan); } - if (longcal) + if (longcal) { ath9k_hw_start_nfcal(ah, false); + /* Do periodic PAOffset Cal */ + ar9002_hw_pa_cal(ah, false); + ar9002_hw_olc_temp_compensation(ah); + } } return iscaldone; -- cgit v1.2.1 From e6f597a1425b5af64917be3448b29e2d5a585ac8 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Mon, 17 Jan 2011 16:11:12 -0800 Subject: staging: fix build failure in bcm driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit While building latest Linus git, I hit the following: CC [M] drivers/staging/bcm/Qos.o drivers/staging/bcm/Qos.c: In function ‘PruneQueue’: drivers/staging/bcm/Qos.c:367: error: ‘struct netdev_queue’ has no member named ‘tx_dropped’ drivers/staging/bcm/Qos.c: In function ‘flush_all_queues’: drivers/staging/bcm/Qos.c:416: error: ‘struct netdev_queue’ has no member named ‘tx_dropped’ make[5]: *** [drivers/staging/bcm/Qos.o] Error 1 make[4]: *** [drivers/staging/bcm] Error 2 make[3]: *** [drivers/staging] Error 2 As well as: CC [M] drivers/staging/bcm/Transmit.o drivers/staging/bcm/Transmit.c: In function ‘SetupNextSend’: drivers/staging/bcm/Transmit.c:163: error: ‘struct netdev_queue’ has no member named ‘tx_bytes’ drivers/staging/bcm/Transmit.c:164: error: ‘struct netdev_queue’ has no member named ‘tx_packets’ make[2]: *** [drivers/staging/bcm/Transmit.o] Error 1 tx_dropped/tx_bytes_tx_packets were removed in commit 1ac9ad13. This patch converts bcm to use net_device_stats instead of netdev_queue. Acked-by: Stephen Hemminger Acked-by: Eric Dumazet Signed-off-by: Andres Salomon Signed-off-by: Linus Torvalds --- drivers/staging/bcm/Qos.c | 7 +++---- drivers/staging/bcm/Transmit.c | 6 +++--- 2 files changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/bcm/Qos.c b/drivers/staging/bcm/Qos.c index 8ce4536e6e28..feade9451b2e 100644 --- a/drivers/staging/bcm/Qos.c +++ b/drivers/staging/bcm/Qos.c @@ -359,12 +359,11 @@ static VOID PruneQueue(PMINI_ADAPTER Adapter, INT iIndex) if(PacketToDrop) { - struct netdev_queue *txq = netdev_get_tx_queue(Adapter->dev, iIndex); if (netif_msg_tx_err(Adapter)) pr_info(PFX "%s: tx queue %d overlimit\n", Adapter->dev->name, iIndex); - txq->tx_dropped++; + netstats->tx_dropped++; DEQUEUEPACKET(Adapter->PackInfo[iIndex].FirstTxQueue, Adapter->PackInfo[iIndex].LastTxQueue); @@ -404,7 +403,7 @@ VOID flush_all_queues(PMINI_ADAPTER Adapter) // down(&Adapter->data_packet_queue_lock); for(iQIndex=LowPriority; iQIndexdev, iQIndex); + struct net_device_stats *netstats = &Adapter->dev->stats; spin_lock_bh(&Adapter->PackInfo[iQIndex].SFQueueLock); while(Adapter->PackInfo[iQIndex].FirstTxQueue) @@ -413,7 +412,7 @@ VOID flush_all_queues(PMINI_ADAPTER Adapter) if(PacketToDrop) { uiTotalPacketLength = PacketToDrop->len; - txq->tx_dropped++; + netstats->tx_dropped++; } else uiTotalPacketLength = 0; diff --git a/drivers/staging/bcm/Transmit.c b/drivers/staging/bcm/Transmit.c index 0f7000960d50..d5e4a7404f71 100644 --- a/drivers/staging/bcm/Transmit.c +++ b/drivers/staging/bcm/Transmit.c @@ -157,11 +157,11 @@ INT SetupNextSend(PMINI_ADAPTER Adapter, struct sk_buff *Packet, USHORT Vcid) } else { - struct netdev_queue *txq = netdev_get_tx_queue(Adapter->dev, QueueIndex); + struct net_device_stats *netstats = &Adapter->dev->stats; Adapter->PackInfo[QueueIndex].uiTotalTxBytes += Leader.PLength; - txq->tx_bytes += Leader.PLength; - ++txq->tx_packets; + netstats->tx_bytes += Leader.PLength; + ++netstats->tx_packets; Adapter->PackInfo[QueueIndex].uiCurrentTokenCount -= Leader.PLength << 3; Adapter->PackInfo[QueueIndex].uiSentBytes += (Packet->len); -- cgit v1.2.1 From d10df505f81064cf983fb3c5111b004d181a10f5 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 17 Jan 2011 16:24:36 +0800 Subject: video: nuc900fb: fix compile error This patch fixes below compile error: CC drivers/video/nuc900fb.o drivers/video/nuc900fb.c: In function 'nuc900fb_suspend': drivers/video/nuc900fb.c:726: error: too few arguments to function 'nuc900fb_stop_lcd' drivers/video/nuc900fb.c: In function 'nuc900fb_resume': drivers/video/nuc900fb.c:743: error: 'bfinfo' undeclared (first use in this function) drivers/video/nuc900fb.c:743: error: (Each undeclared identifier is reported only once drivers/video/nuc900fb.c:743: error: for each function it appears in.) make[2]: *** [drivers/video/nuc900fb.o] Error 1 make[1]: *** [drivers/video] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin Acked-by: Wan ZongShun Signed-off-by: Paul Mundt --- drivers/video/nuc900fb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/nuc900fb.c b/drivers/video/nuc900fb.c index 62498bd662fc..29ef92f97f0c 100644 --- a/drivers/video/nuc900fb.c +++ b/drivers/video/nuc900fb.c @@ -723,7 +723,7 @@ static int nuc900fb_suspend(struct platform_device *dev, pm_message_t state) struct fb_info *fbinfo = platform_get_drvdata(dev); struct nuc900fb_info *info = fbinfo->par; - nuc900fb_stop_lcd(); + nuc900fb_stop_lcd(fbinfo); msleep(1); clk_disable(info->clk); return 0; @@ -740,7 +740,7 @@ static int nuc900fb_resume(struct platform_device *dev) msleep(1); nuc900fb_init_registers(fbinfo); - nuc900fb_activate_var(bfinfo); + nuc900fb_activate_var(fbinfo); return 0; } -- cgit v1.2.1 From 6c9571f4b759717e1c938cbc6b53ec8ce5813245 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 17 Jan 2011 16:25:57 +0800 Subject: video: nuc900fb: properly free resources in nuc900fb_remove Signed-off-by: Axel Lin Signed-off-by: Paul Mundt --- drivers/video/nuc900fb.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/video/nuc900fb.c b/drivers/video/nuc900fb.c index 29ef92f97f0c..f838d9e277f0 100644 --- a/drivers/video/nuc900fb.c +++ b/drivers/video/nuc900fb.c @@ -696,6 +696,8 @@ static int nuc900fb_remove(struct platform_device *pdev) nuc900fb_stop_lcd(fbinfo); msleep(1); + unregister_framebuffer(fbinfo); + nuc900fb_cpufreq_deregister(fbi); nuc900fb_unmap_video_memory(fbinfo); iounmap(fbi->io); -- cgit v1.2.1 From 0b7f1cc79d61427961e311c6a21f528bdb226e40 Mon Sep 17 00:00:00 2001 From: axel lin Date: Fri, 14 Jan 2011 09:39:11 +0000 Subject: video: pxa3xx-gcu: Return -EFAULT when copy_from_user() fails Return -EFAULT instead of number of bytes that could not be copied if copy_from_user() fails. Also fix a typo in the comments. Signed-off-by: Axel Lin Signed-off-by: Paul Mundt --- drivers/video/pxa3xx-gcu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/pxa3xx-gcu.c b/drivers/video/pxa3xx-gcu.c index b81168df253d..cf4beb9dc9bb 100644 --- a/drivers/video/pxa3xx-gcu.c +++ b/drivers/video/pxa3xx-gcu.c @@ -1,5 +1,5 @@ /* - * pxa3xx-gc.c - Linux kernel module for PXA3xx graphics controllers + * pxa3xx-gcu.c - Linux kernel module for PXA3xx graphics controllers * * This driver needs a DirectFB counterpart in user space, communication * is handled via mmap()ed memory areas and an ioctl. @@ -421,7 +421,7 @@ pxa3xx_gcu_misc_write(struct file *filp, const char *buff, buffer->next = priv->free; priv->free = buffer; spin_unlock_irqrestore(&priv->spinlock, flags); - return ret; + return -EFAULT; } buffer->length = words; -- cgit v1.2.1 From a0640925880a5801ae0aac232fae6900a2c44b27 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 17 Jan 2011 20:40:32 -0800 Subject: Input: tnetv107x-keypad - don't treat NULL clk as an error We should use IS_ERR() when checking whether clk_get() succeeded or not since it returns errors by encoding error codes with ERR_PTR(). Signed-off-by: Jamie Iles Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/tnetv107x-keypad.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c index b4a81ebfab92..c8f097a15d89 100644 --- a/drivers/input/keyboard/tnetv107x-keypad.c +++ b/drivers/input/keyboard/tnetv107x-keypad.c @@ -14,6 +14,7 @@ */ #include +#include #include #include #include @@ -219,9 +220,9 @@ static int __devinit keypad_probe(struct platform_device *pdev) } kp->clk = clk_get(dev, NULL); - if (!kp->clk) { + if (IS_ERR(kp->clk)) { dev_err(dev, "cannot claim device clock\n"); - error = -EINVAL; + error = PTR_ERR(kp->clk); goto error_clk; } -- cgit v1.2.1 From ba555461833aa1b5083004492ba97c92d5fccf46 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 17 Jan 2011 20:40:55 -0800 Subject: Input: tnetv107x-ts - don't treat NULL clk as an error We should use IS_ERR() when checking whether clk_get() succeeded or not since it returns errors by encoding error codes with ERR_PTR(). Signed-off-by: Jamie Iles Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/tnetv107x-ts.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/tnetv107x-ts.c b/drivers/input/touchscreen/tnetv107x-ts.c index cf1dba2e267c..22a3411e93c5 100644 --- a/drivers/input/touchscreen/tnetv107x-ts.c +++ b/drivers/input/touchscreen/tnetv107x-ts.c @@ -14,6 +14,7 @@ */ #include +#include #include #include #include @@ -289,9 +290,9 @@ static int __devinit tsc_probe(struct platform_device *pdev) } ts->clk = clk_get(dev, NULL); - if (!ts->clk) { + if (IS_ERR(ts->clk)) { dev_err(dev, "cannot claim device clock\n"); - error = -EINVAL; + error = PTR_ERR(ts->clk); goto error_clk; } -- cgit v1.2.1 From d2763b4f44e16f44cc4156c9591e74df9dcd88be Mon Sep 17 00:00:00 2001 From: Naveen Kumar Gaddipati Date: Mon, 17 Jan 2011 20:40:58 -0800 Subject: Input: bu21013_ts - remove duplicate resolution parameters Remove duplicate display resolution parameters from platform data as one pair is quite enough. Signed-off-by: Naveen Kumar Gaddipati Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/bu21013_ts.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c index f7fa9ef4cd65..3c7e60b2f778 100644 --- a/drivers/input/touchscreen/bu21013_ts.c +++ b/drivers/input/touchscreen/bu21013_ts.c @@ -485,9 +485,9 @@ static int __devinit bu21013_probe(struct i2c_client *client, __set_bit(EV_ABS, in_dev->evbit); input_set_abs_params(in_dev, ABS_MT_POSITION_X, 0, - pdata->x_max_res, 0, 0); + pdata->touch_x_max, 0, 0); input_set_abs_params(in_dev, ABS_MT_POSITION_Y, 0, - pdata->y_max_res, 0, 0); + pdata->touch_y_max, 0, 0); input_set_drvdata(in_dev, bu21013_data); error = request_threaded_irq(pdata->irq, NULL, bu21013_gpio_irq, -- cgit v1.2.1 From 81e78deafb21ba867eb244ab1117726c68d817f8 Mon Sep 17 00:00:00 2001 From: Naveen Kumar Gaddipati Date: Mon, 17 Jan 2011 20:47:31 -0800 Subject: Input: bu21013_ts - added regulator support Add regulator support in ROHM BU21013 touch panel driver. Signed-off-by: Naveen Kumar Gaddipati Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/bu21013_ts.c | 35 +++++++++++++++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c index 3c7e60b2f778..1507ce108d5b 100644 --- a/drivers/input/touchscreen/bu21013_ts.c +++ b/drivers/input/touchscreen/bu21013_ts.c @@ -12,6 +12,7 @@ #include #include #include +#include #define PEN_DOWN_INTR 0 #define MAX_FINGERS 2 @@ -139,6 +140,7 @@ * @chip: pointer to the touch panel controller * @in_dev: pointer to the input device structure * @intr_pin: interrupt pin value + * @regulator: pointer to the Regulator used for touch screen * * Touch panel device data structure */ @@ -149,6 +151,7 @@ struct bu21013_ts_data { const struct bu21013_platform_device *chip; struct input_dev *in_dev; unsigned int intr_pin; + struct regulator *regulator; }; /** @@ -456,6 +459,20 @@ static int __devinit bu21013_probe(struct i2c_client *client, bu21013_data->in_dev = in_dev; bu21013_data->chip = pdata; bu21013_data->client = client; + + bu21013_data->regulator = regulator_get(&client->dev, "V-TOUCH"); + if (IS_ERR(bu21013_data->regulator)) { + dev_err(&client->dev, "regulator_get failed\n"); + error = PTR_ERR(bu21013_data->regulator); + goto err_free_mem; + } + + error = regulator_enable(bu21013_data->regulator); + if (error < 0) { + dev_err(&client->dev, "regulator enable failed\n"); + goto err_put_regulator; + } + bu21013_data->touch_stopped = false; init_waitqueue_head(&bu21013_data->wait); @@ -464,7 +481,7 @@ static int __devinit bu21013_probe(struct i2c_client *client, error = pdata->cs_en(pdata->cs_pin); if (error < 0) { dev_err(&client->dev, "chip init failed\n"); - goto err_free_mem; + goto err_disable_regulator; } } @@ -513,6 +530,10 @@ err_free_irq: bu21013_free_irq(bu21013_data); err_cs_disable: pdata->cs_dis(pdata->cs_pin); +err_disable_regulator: + regulator_disable(bu21013_data->regulator); +err_put_regulator: + regulator_put(bu21013_data->regulator); err_free_mem: input_free_device(in_dev); kfree(bu21013_data); @@ -535,6 +556,10 @@ static int __devexit bu21013_remove(struct i2c_client *client) bu21013_data->chip->cs_dis(bu21013_data->chip->cs_pin); input_unregister_device(bu21013_data->in_dev); + + regulator_disable(bu21013_data->regulator); + regulator_put(bu21013_data->regulator); + kfree(bu21013_data); device_init_wakeup(&client->dev, false); @@ -561,6 +586,8 @@ static int bu21013_suspend(struct device *dev) else disable_irq(bu21013_data->chip->irq); + regulator_disable(bu21013_data->regulator); + return 0; } @@ -577,6 +604,12 @@ static int bu21013_resume(struct device *dev) struct i2c_client *client = bu21013_data->client; int retval; + retval = regulator_enable(bu21013_data->regulator); + if (retval < 0) { + dev_err(&client->dev, "bu21013 regulator enable failed\n"); + return retval; + } + retval = bu21013_init_chip(bu21013_data); if (retval < 0) { dev_err(&client->dev, "bu21013 controller config failed\n"); -- cgit v1.2.1 From b0f05aadf1516c166ba301b7a535bc9429ce1961 Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Mon, 17 Jan 2011 20:48:18 -0800 Subject: Input: ct82710c - return proper error code for ct82c710_open If request_irq() fails we should return the proper error instead of -1. Signed-off-by: Davidlohr Bueso Signed-off-by: Dmitry Torokhov --- drivers/input/serio/ct82c710.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/input/serio/ct82c710.c b/drivers/input/serio/ct82c710.c index 448c7724beb9..852816567241 100644 --- a/drivers/input/serio/ct82c710.c +++ b/drivers/input/serio/ct82c710.c @@ -111,9 +111,11 @@ static void ct82c710_close(struct serio *serio) static int ct82c710_open(struct serio *serio) { unsigned char status; + int err; - if (request_irq(CT82C710_IRQ, ct82c710_interrupt, 0, "ct82c710", NULL)) - return -1; + err = request_irq(CT82C710_IRQ, ct82c710_interrupt, 0, "ct82c710", NULL); + if (err) + return err; status = inb_p(CT82C710_STATUS); @@ -131,7 +133,7 @@ static int ct82c710_open(struct serio *serio) status &= ~(CT82C710_ENABLE | CT82C710_INTS_ON); outb_p(status, CT82C710_STATUS); free_irq(CT82C710_IRQ, NULL); - return -1; + return -EBUSY; } return 0; -- cgit v1.2.1 From 1ffa325bac55982d72a61ccab1a4190501e37148 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 17 Jan 2011 13:35:57 -0800 Subject: drm/i915: set more FBC chicken bits Add a couple of missing workaround bits for ILK & SNB. These disable clock gating on a couple of units that would otherwise prevent FBC from working. Signed-off-by: Jesse Barnes Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_reg.h | 2 ++ drivers/gpu/drm/i915/intel_display.c | 4 +++- 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 40a407f41f61..6abb15f13c2b 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2626,6 +2626,8 @@ #define DISPLAY_PORT_PLL_BIOS_2 0x46014 #define PCH_DSPCLK_GATE_D 0x42020 +# define DPFCUNIT_CLOCK_GATE_DISABLE (1 << 9) +# define DPFCRUNIT_CLOCK_GATE_DISABLE (1 << 8) # define DPFDUNIT_CLOCK_GATE_DISABLE (1 << 7) # define DPARBUNIT_CLOCK_GATE_DISABLE (1 << 5) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 98967f3b7724..d2ef1c2c65e9 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6286,7 +6286,9 @@ void intel_enable_clock_gating(struct drm_device *dev) if (IS_GEN5(dev)) { /* Required for FBC */ - dspclk_gate |= DPFDUNIT_CLOCK_GATE_DISABLE; + dspclk_gate |= DPFCUNIT_CLOCK_GATE_DISABLE | + DPFCRUNIT_CLOCK_GATE_DISABLE | + DPFDUNIT_CLOCK_GATE_DISABLE; /* Required for CxSR */ dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE; -- cgit v1.2.1 From 8efaef4dc842a8a050d10aef30e26220b8995fc3 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Tue, 4 Jan 2011 21:28:22 +0100 Subject: SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs The Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This patch implements a driver for that. Signed-off-by: Gabor Juhos Cc: David Brownell Cc: spi-devel-general@lists.sourceforge.net Acked-by: Grant Likely Cc: linux-mips@linux-mips.org Cc: Imre Kaloz Cc: Luis R. Rodriguez Cc: Cliff Holden Cc: Kathy Giori Patchwork: https://patchwork.linux-mips.org/patch/1960/ Signed-off-by: Ralf Baechle --- drivers/spi/Kconfig | 8 ++ drivers/spi/Makefile | 1 + drivers/spi/ath79_spi.c | 292 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 301 insertions(+) create mode 100644 drivers/spi/ath79_spi.c (limited to 'drivers') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 13bfa9d48082..bb233a9cbad2 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -53,6 +53,14 @@ if SPI_MASTER comment "SPI Master Controller Drivers" +config SPI_ATH79 + tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver" + depends on ATH79 && GENERIC_GPIO + select SPI_BITBANG + help + This enables support for the SPI controller present on the + Atheros AR71XX/AR724X/AR913X SoCs. + config SPI_ATMEL tristate "Atmel SPI Controller" depends on (ARCH_AT91 || AVR32) diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 3a42463c92a4..86d1b5f9bbd9 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_SPI_MASTER) += spi.o # SPI master controller drivers (bus) obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o +obj-$(CONFIG_SPI_ATH79) += ath79_spi.o obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o obj-$(CONFIG_SPI_AU1550) += au1550_spi.o diff --git a/drivers/spi/ath79_spi.c b/drivers/spi/ath79_spi.c new file mode 100644 index 000000000000..fcff810ea3b0 --- /dev/null +++ b/drivers/spi/ath79_spi.c @@ -0,0 +1,292 @@ +/* + * SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs + * + * Copyright (C) 2009-2011 Gabor Juhos + * + * This driver has been based on the spi-gpio.c: + * Copyright (C) 2006,2008 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DRV_NAME "ath79-spi" + +struct ath79_spi { + struct spi_bitbang bitbang; + u32 ioc_base; + u32 reg_ctrl; + void __iomem *base; +}; + +static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg) +{ + return ioread32(sp->base + reg); +} + +static inline void ath79_spi_wr(struct ath79_spi *sp, unsigned reg, u32 val) +{ + iowrite32(val, sp->base + reg); +} + +static inline struct ath79_spi *ath79_spidev_to_sp(struct spi_device *spi) +{ + return spi_master_get_devdata(spi->master); +} + +static void ath79_spi_chipselect(struct spi_device *spi, int is_active) +{ + struct ath79_spi *sp = ath79_spidev_to_sp(spi); + int cs_high = (spi->mode & SPI_CS_HIGH) ? is_active : !is_active; + + if (is_active) { + /* set initial clock polarity */ + if (spi->mode & SPI_CPOL) + sp->ioc_base |= AR71XX_SPI_IOC_CLK; + else + sp->ioc_base &= ~AR71XX_SPI_IOC_CLK; + + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); + } + + if (spi->chip_select) { + struct ath79_spi_controller_data *cdata = spi->controller_data; + + /* SPI is normally active-low */ + gpio_set_value(cdata->gpio, cs_high); + } else { + if (cs_high) + sp->ioc_base |= AR71XX_SPI_IOC_CS0; + else + sp->ioc_base &= ~AR71XX_SPI_IOC_CS0; + + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); + } + +} + +static int ath79_spi_setup_cs(struct spi_device *spi) +{ + struct ath79_spi *sp = ath79_spidev_to_sp(spi); + struct ath79_spi_controller_data *cdata; + + cdata = spi->controller_data; + if (spi->chip_select && !cdata) + return -EINVAL; + + /* enable GPIO mode */ + ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO); + + /* save CTRL register */ + sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL); + sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC); + + /* TODO: setup speed? */ + ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43); + + if (spi->chip_select) { + int status = 0; + + status = gpio_request(cdata->gpio, dev_name(&spi->dev)); + if (status) + return status; + + status = gpio_direction_output(cdata->gpio, + spi->mode & SPI_CS_HIGH); + if (status) { + gpio_free(cdata->gpio); + return status; + } + } else { + if (spi->mode & SPI_CS_HIGH) + sp->ioc_base |= AR71XX_SPI_IOC_CS0; + else + sp->ioc_base &= ~AR71XX_SPI_IOC_CS0; + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base); + } + + return 0; +} + +static void ath79_spi_cleanup_cs(struct spi_device *spi) +{ + struct ath79_spi *sp = ath79_spidev_to_sp(spi); + + if (spi->chip_select) { + struct ath79_spi_controller_data *cdata = spi->controller_data; + gpio_free(cdata->gpio); + } + + /* restore CTRL register */ + ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, sp->reg_ctrl); + /* disable GPIO mode */ + ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0); +} + +static int ath79_spi_setup(struct spi_device *spi) +{ + int status = 0; + + if (spi->bits_per_word > 32) + return -EINVAL; + + if (!spi->controller_state) { + status = ath79_spi_setup_cs(spi); + if (status) + return status; + } + + status = spi_bitbang_setup(spi); + if (status && !spi->controller_state) + ath79_spi_cleanup_cs(spi); + + return status; +} + +static void ath79_spi_cleanup(struct spi_device *spi) +{ + ath79_spi_cleanup_cs(spi); + spi_bitbang_cleanup(spi); +} + +static u32 ath79_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs, + u32 word, u8 bits) +{ + struct ath79_spi *sp = ath79_spidev_to_sp(spi); + u32 ioc = sp->ioc_base; + + /* clock starts at inactive polarity */ + for (word <<= (32 - bits); likely(bits); bits--) { + u32 out; + + if (word & (1 << 31)) + out = ioc | AR71XX_SPI_IOC_DO; + else + out = ioc & ~AR71XX_SPI_IOC_DO; + + /* setup MSB (to slave) on trailing edge */ + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out); + ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, out | AR71XX_SPI_IOC_CLK); + + word <<= 1; + } + + return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS); +} + +static __devinit int ath79_spi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct ath79_spi *sp; + struct ath79_spi_platform_data *pdata; + struct resource *r; + int ret; + + master = spi_alloc_master(&pdev->dev, sizeof(*sp)); + if (master == NULL) { + dev_err(&pdev->dev, "failed to allocate spi master\n"); + return -ENOMEM; + } + + sp = spi_master_get_devdata(master); + platform_set_drvdata(pdev, sp); + + pdata = pdev->dev.platform_data; + + master->setup = ath79_spi_setup; + master->cleanup = ath79_spi_cleanup; + if (pdata) { + master->bus_num = pdata->bus_num; + master->num_chipselect = pdata->num_chipselect; + } else { + master->bus_num = -1; + master->num_chipselect = 1; + } + + sp->bitbang.master = spi_master_get(master); + sp->bitbang.chipselect = ath79_spi_chipselect; + sp->bitbang.txrx_word[SPI_MODE_0] = ath79_spi_txrx_mode0; + sp->bitbang.setup_transfer = spi_bitbang_setup_transfer; + sp->bitbang.flags = SPI_CS_HIGH; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + ret = -ENOENT; + goto err_put_master; + } + + sp->base = ioremap(r->start, r->end - r->start + 1); + if (!sp->base) { + ret = -ENXIO; + goto err_put_master; + } + + ret = spi_bitbang_start(&sp->bitbang); + if (ret) + goto err_unmap; + + return 0; + +err_unmap: + iounmap(sp->base); +err_put_master: + platform_set_drvdata(pdev, NULL); + spi_master_put(sp->bitbang.master); + + return ret; +} + +static __devexit int ath79_spi_remove(struct platform_device *pdev) +{ + struct ath79_spi *sp = platform_get_drvdata(pdev); + + spi_bitbang_stop(&sp->bitbang); + iounmap(sp->base); + platform_set_drvdata(pdev, NULL); + spi_master_put(sp->bitbang.master); + + return 0; +} + +static struct platform_driver ath79_spi_driver = { + .probe = ath79_spi_probe, + .remove = __devexit_p(ath79_spi_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static __init int ath79_spi_init(void) +{ + return platform_driver_register(&ath79_spi_driver); +} +module_init(ath79_spi_init); + +static __exit void ath79_spi_exit(void) +{ + platform_driver_unregister(&ath79_spi_driver); +} +module_exit(ath79_spi_exit); + +MODULE_DESCRIPTION("SPI controller driver for Atheros AR71XX/AR724X/AR913X"); +MODULE_AUTHOR("Gabor Juhos "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRV_NAME); -- cgit v1.2.1 From 4efe070896e1f7373c98a13713e659d1f5dee52a Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 18 Jan 2011 11:25:41 -0800 Subject: drm/i915: make the blitter report buffer modifications to the FBC unit Without this change, blits to the front buffer won't invalidate FBC state, causing us to scan out stale data. Make sure we update these bits on every FBC enable, since they may get clobbered if we shut off the display. References: https://bugzilla.kernel.org/show_bug.cgi?id=26932 Signed-off-by: Jesse Barnes Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_reg.h | 4 ++++ drivers/gpu/drm/i915/intel_display.c | 21 +++++++++++++++++++++ 2 files changed, 25 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 6abb15f13c2b..5cfc68940f17 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -513,6 +513,10 @@ #define GEN6_BLITTER_SYNC_STATUS (1 << 24) #define GEN6_BLITTER_USER_INTERRUPT (1 << 22) +#define GEN6_BLITTER_ECOSKPD 0x221d0 +#define GEN6_BLITTER_LOCK_SHIFT 16 +#define GEN6_BLITTER_FBC_NOTIFY (1<<3) + #define GEN6_BSD_SLEEP_PSMI_CONTROL 0x12050 #define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_MODIFY_MASK (1 << 16) #define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_DISABLE (1 << 0) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d2ef1c2c65e9..d7f237deaaf0 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1213,6 +1213,26 @@ static bool g4x_fbc_enabled(struct drm_device *dev) return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN; } +static void sandybridge_blit_fbc_update(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 blt_ecoskpd; + + /* Make sure blitter notifies FBC of writes */ + __gen6_force_wake_get(dev_priv); + blt_ecoskpd = I915_READ(GEN6_BLITTER_ECOSKPD); + blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY << + GEN6_BLITTER_LOCK_SHIFT; + I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd); + blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY; + I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd); + blt_ecoskpd &= ~(GEN6_BLITTER_FBC_NOTIFY << + GEN6_BLITTER_LOCK_SHIFT); + I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd); + POSTING_READ(GEN6_BLITTER_ECOSKPD); + __gen6_force_wake_put(dev_priv); +} + static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval) { struct drm_device *dev = crtc->dev; @@ -1266,6 +1286,7 @@ static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval) I915_WRITE(SNB_DPFC_CTL_SA, SNB_CPU_FENCE_ENABLE | dev_priv->cfb_fence); I915_WRITE(DPFC_CPU_FENCE_OFFSET, crtc->y); + sandybridge_blit_fbc_update(dev); } DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane); -- cgit v1.2.1 From 599b13adc2bf236da8f86a34b0b51168e19d3524 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Tue, 18 Jan 2011 08:06:43 -0500 Subject: ath5k: fix locking in tx_complete_poll_work ath5k_reset must be called with sc->lock. Since the tx queue watchdog runs in a workqueue and accesses sc, it's appropriate to just take the lock over the whole function. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 019a74d533a6..09ae4ef0fd51 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2294,6 +2294,8 @@ ath5k_tx_complete_poll_work(struct work_struct *work) int i; bool needreset = false; + mutex_lock(&sc->lock); + for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) { if (sc->txqs[i].setup) { txq = &sc->txqs[i]; @@ -2321,6 +2323,8 @@ ath5k_tx_complete_poll_work(struct work_struct *work) ath5k_reset(sc, NULL, true); } + mutex_unlock(&sc->lock); + ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT)); } -- cgit v1.2.1 From 38d59392b29437af3a702209b6a5196ef01f79a8 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Tue, 18 Jan 2011 07:59:13 -0800 Subject: iwlwifi: fix valid chain reading from EEPROM When read valid tx/rx chains from EEPROM, there is a bug to use the tx chain value for both tx and rx, the result of this cause low receive throughput on 1x2 devices becuase rx will only utilize single chain instead of two chains Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c index 97906dd442e6..14ceb4df72f6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c @@ -168,7 +168,7 @@ int iwl_eeprom_check_sku(struct iwl_priv *priv) /* not using .cfg overwrite */ radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG); priv->cfg->valid_tx_ant = EEPROM_RF_CFG_TX_ANT_MSK(radio_cfg); - priv->cfg->valid_rx_ant = EEPROM_RF_CFG_TX_ANT_MSK(radio_cfg); + priv->cfg->valid_rx_ant = EEPROM_RF_CFG_RX_ANT_MSK(radio_cfg); if (!priv->cfg->valid_tx_ant || !priv->cfg->valid_rx_ant) { IWL_ERR(priv, "Invalid chain (0X%x, 0X%x)\n", priv->cfg->valid_tx_ant, -- cgit v1.2.1 From c7bf71c517abfc3b15970d67910e0f62e0522939 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 17 Jan 2011 12:48:20 -0800 Subject: hwmon: (lm93) Add support for LM94 This patch adds basic support for LM94 to the LM93 driver. LM94 specific sensors and features are not supported. Signed-off-by: Guenter Roeck Acked-by: Jean Delvare --- drivers/hwmon/Kconfig | 4 ++-- drivers/hwmon/lm93.c | 21 +++++++++++++++++++-- 2 files changed, 21 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 35f00dae3676..773e484f1646 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -618,8 +618,8 @@ config SENSORS_LM93 depends on I2C select HWMON_VID help - If you say yes here you get support for National Semiconductor LM93 - sensor chips. + If you say yes here you get support for National Semiconductor LM93, + LM94, and compatible sensor chips. This driver can also be built as a module. If so, the module will be called lm93. diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c index c9ed14eba5a6..3b43df418613 100644 --- a/drivers/hwmon/lm93.c +++ b/drivers/hwmon/lm93.c @@ -135,6 +135,11 @@ #define LM93_MFR_ID 0x73 #define LM93_MFR_ID_PROTOTYPE 0x72 +/* LM94 REGISTER VALUES */ +#define LM94_MFR_ID_2 0x7a +#define LM94_MFR_ID 0x79 +#define LM94_MFR_ID_PROTOTYPE 0x78 + /* SMBus capabilities */ #define LM93_SMBUS_FUNC_FULL (I2C_FUNC_SMBUS_BYTE_DATA | \ I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA) @@ -2504,6 +2509,7 @@ static int lm93_detect(struct i2c_client *client, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; int mfr, ver; + const char *name; if (!i2c_check_functionality(adapter, LM93_SMBUS_FUNC_MIN)) return -ENODEV; @@ -2517,13 +2523,23 @@ static int lm93_detect(struct i2c_client *client, struct i2c_board_info *info) } ver = lm93_read_byte(client, LM93_REG_VER); - if (ver != LM93_MFR_ID && ver != LM93_MFR_ID_PROTOTYPE) { + switch (ver) { + case LM93_MFR_ID: + case LM93_MFR_ID_PROTOTYPE: + name = "lm93"; + break; + case LM94_MFR_ID_2: + case LM94_MFR_ID: + case LM94_MFR_ID_PROTOTYPE: + name = "lm94"; + break; + default: dev_dbg(&adapter->dev, "detect failed, bad version id 0x%02x!\n", ver); return -ENODEV; } - strlcpy(info->type, "lm93", I2C_NAME_SIZE); + strlcpy(info->type, name, I2C_NAME_SIZE); dev_dbg(&adapter->dev,"loading %s at %d,0x%02x\n", client->name, i2c_adapter_id(client->adapter), client->addr); @@ -2602,6 +2618,7 @@ static int lm93_remove(struct i2c_client *client) static const struct i2c_device_id lm93_id[] = { { "lm93", 0 }, + { "lm94", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, lm93_id); -- cgit v1.2.1 From 74d7a11979e39adc1fc4d7a77afe83aa12a0f2b1 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 18 Jan 2011 04:33:18 +0000 Subject: bnx2x: Swap BCM8073 PHY polarity if required Enable controlling BCM8073 PN polarity swap through nvm configuration, which is required in certain systems Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_hsi.h | 4 ++++ drivers/net/bnx2x/bnx2x_link.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h index 6238d4f63989..548f5631c0dc 100644 --- a/drivers/net/bnx2x/bnx2x_hsi.h +++ b/drivers/net/bnx2x/bnx2x_hsi.h @@ -352,6 +352,10 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ #define PORT_HW_CFG_LANE_SWAP_CFG_31203120 0x0000d8d8 /* forced only */ #define PORT_HW_CFG_LANE_SWAP_CFG_32103210 0x0000e4e4 + /* Indicate whether to swap the external phy polarity */ +#define PORT_HW_CFG_SWAP_PHY_POLARITY_MASK 0x00010000 +#define PORT_HW_CFG_SWAP_PHY_POLARITY_DISABLED 0x00000000 +#define PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED 0x00010000 u32 external_phy_config; #define PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK 0xff000000 diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 43b0de24f391..77f9eb193cba 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -4108,6 +4108,25 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy, DP(NETIF_MSG_LINK, "Before rom RX_ALARM(port1): 0x%x\n", tmp1); + /** + * If this is forced speed, set to KR or KX (all other are not + * supported) + */ + /* Swap polarity if required - Must be done only in non-1G mode */ + if (params->lane_config & PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) { + /* Configure the 8073 to swap _P and _N of the KR lines */ + DP(NETIF_MSG_LINK, "Swapping polarity for the 8073\n"); + /* 10G Rx/Tx and 1G Tx signal polarity swap */ + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL, &val); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL, + (val | (3<<9))); + } + + /* Enable CL37 BAM */ if (REG_RD(bp, params->shmem_base + offsetof(struct shmem_region, dev_info. @@ -4314,6 +4333,29 @@ static u8 bnx2x_8073_read_status(struct bnx2x_phy *phy, } if (link_up) { + /* Swap polarity if required */ + if (params->lane_config & + PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) { + /* Configure the 8073 to swap P and N of the KR lines */ + bnx2x_cl45_read(bp, phy, + MDIO_XS_DEVAD, + MDIO_XS_REG_8073_RX_CTRL_PCIE, &val1); + /** + * Set bit 3 to invert Rx in 1G mode and clear this bit + * when it`s in 10G mode. + */ + if (vars->line_speed == SPEED_1000) { + DP(NETIF_MSG_LINK, "Swapping 1G polarity for" + "the 8073\n"); + val1 |= (1<<3); + } else + val1 &= ~(1<<3); + + bnx2x_cl45_write(bp, phy, + MDIO_XS_DEVAD, + MDIO_XS_REG_8073_RX_CTRL_PCIE, + val1); + } bnx2x_ext_phy_10G_an_resolve(bp, phy, vars); bnx2x_8073_resolve_fc(phy, params, vars); } -- cgit v1.2.1 From b21a3424877a4d5ca91a6d446ed581a2bd03160c Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 18 Jan 2011 04:33:24 +0000 Subject: bnx2x: Common init will be executed only once after POR Common init used to be called by the driver when the first port comes up, mainly to reset and reload external PHY microcode. However, in case management driver is active on the other port, traffic would halted. So limit the common init to be done only once after POR. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 77f9eb193cba..bdf3c670c8f6 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -7958,6 +7958,7 @@ u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[], u32 shmem2_base_path[], u32 chip_id) { u8 rc = 0; + u32 phy_ver; u8 phy_index; u32 ext_phy_type, ext_phy_config; DP(NETIF_MSG_LINK, "Begin common phy init\n"); @@ -7965,6 +7966,16 @@ u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[], if (CHIP_REV_IS_EMUL(bp)) return 0; + /* Check if common init was already done */ + phy_ver = REG_RD(bp, shmem_base_path[0] + + offsetof(struct shmem_region, + port_mb[PORT_0].ext_phy_fw_version)); + if (phy_ver) { + DP(NETIF_MSG_LINK, "Not doing common init; phy ver is 0x%x\n", + phy_ver); + return 0; + } + /* Read the ext_phy_type for arbitrary port(0) */ for (phy_index = EXT_PHY1; phy_index < MAX_PHYS; phy_index++) { -- cgit v1.2.1 From 1f48353a3ce7297f5150b47e21df5ec212876e5d Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 18 Jan 2011 04:33:31 +0000 Subject: bnx2x: LED fix for BCM8727 over BCM57712 LED on BCM57712+BCM8727 systems requires different settings Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index bdf3c670c8f6..36a88448b245 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -3166,7 +3166,23 @@ u8 bnx2x_set_led(struct link_params *params, if (!vars->link_up) break; case LED_MODE_ON: - if (SINGLE_MEDIA_DIRECT(params)) { + if (params->phy[EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727 && + CHIP_IS_E2(bp) && params->num_phys == 2) { + /** + * This is a work-around for E2+8727 Configurations + */ + if (mode == LED_MODE_ON || + speed == SPEED_10000){ + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); + REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); + + tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); + EMAC_WR(bp, EMAC_REG_EMAC_LED, + (tmp | EMAC_LED_OVERRIDE)); + return rc; + } + } else if (SINGLE_MEDIA_DIRECT(params)) { /** * This is a work-around for HW issue found when link * is up in CL73 -- cgit v1.2.1 From 5c99274b0177cd614455c277b1a4d4410d9cb702 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 18 Jan 2011 04:33:36 +0000 Subject: bnx2x: Fix BCM8073/BCM8727 microcode loading Improve microcode loading verification before proceeding to next stage Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 73 +++++++++++++++++++++++++----------------- 1 file changed, 43 insertions(+), 30 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 36a88448b245..500258d38cf1 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -3870,11 +3870,14 @@ static void bnx2x_8073_resolve_fc(struct bnx2x_phy *phy, pause_result); } } - -static void bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp, +static u8 bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp, struct bnx2x_phy *phy, u8 port) { + u32 count = 0; + u16 fw_ver1, fw_msgout; + u8 rc = 0; + /* Boot port from external ROM */ /* EDC grst */ bnx2x_cl45_write(bp, phy, @@ -3904,14 +3907,45 @@ static void bnx2x_8073_8727_external_rom_boot(struct bnx2x *bp, MDIO_PMA_REG_GEN_CTRL, MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP); - /* wait for 120ms for code download via SPI port */ - msleep(120); + /* Delay 100ms per the PHY specifications */ + msleep(100); + + /* 8073 sometimes taking longer to download */ + do { + count++; + if (count > 300) { + DP(NETIF_MSG_LINK, + "bnx2x_8073_8727_external_rom_boot port %x:" + "Download failed. fw version = 0x%x\n", + port, fw_ver1); + rc = -EINVAL; + break; + } + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER1, &fw_ver1); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_M8051_MSGOUT_REG, &fw_msgout); + + msleep(1); + } while (fw_ver1 == 0 || fw_ver1 == 0x4321 || + ((fw_msgout & 0xff) != 0x03 && (phy->type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073))); /* Clear ser_boot_ctl bit */ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0000); bnx2x_save_bcm_spirom_ver(bp, phy, port); + + DP(NETIF_MSG_LINK, + "bnx2x_8073_8727_external_rom_boot port %x:" + "Download complete. fw version = 0x%x\n", + port, fw_ver1); + + return rc; } static void bnx2x_8073_set_xaui_low_power_mode(struct bnx2x *bp, @@ -7721,7 +7755,6 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, /* PART2 - Download firmware to both phys */ for (port = PORT_MAX - 1; port >= PORT_0; port--) { - u16 fw_ver1; if (CHIP_IS_E2(bp)) port_of_path = 0; else @@ -7729,19 +7762,9 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, DP(NETIF_MSG_LINK, "Loading spirom for phy address 0x%x\n", phy_blk[port]->addr); - bnx2x_8073_8727_external_rom_boot(bp, phy_blk[port], - port_of_path); - - bnx2x_cl45_read(bp, phy_blk[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER1, &fw_ver1); - if (fw_ver1 == 0 || fw_ver1 == 0x4321) { - DP(NETIF_MSG_LINK, - "bnx2x_8073_common_init_phy port %x:" - "Download failed. fw version = 0x%x\n", - port, fw_ver1); + if (bnx2x_8073_8727_external_rom_boot(bp, phy_blk[port], + port_of_path)) return -EINVAL; - } /* Only set bit 10 = 1 (Tx power down) */ bnx2x_cl45_read(bp, phy_blk[port], @@ -7906,27 +7929,17 @@ static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, } /* PART2 - Download firmware to both phys */ for (port = PORT_MAX - 1; port >= PORT_0; port--) { - u16 fw_ver1; if (CHIP_IS_E2(bp)) port_of_path = 0; else port_of_path = port; DP(NETIF_MSG_LINK, "Loading spirom for phy address 0x%x\n", phy_blk[port]->addr); - bnx2x_8073_8727_external_rom_boot(bp, phy_blk[port], - port_of_path); - bnx2x_cl45_read(bp, phy_blk[port], - MDIO_PMA_DEVAD, - MDIO_PMA_REG_ROM_VER1, &fw_ver1); - if (fw_ver1 == 0 || fw_ver1 == 0x4321) { - DP(NETIF_MSG_LINK, - "bnx2x_8727_common_init_phy port %x:" - "Download failed. fw version = 0x%x\n", - port, fw_ver1); + if (bnx2x_8073_8727_external_rom_boot(bp, phy_blk[port], + port_of_path)) return -EINVAL; - } - } + } return 0; } -- cgit v1.2.1 From 791f18c0da3ad540806122e173d6b730d7d7f60b Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 18 Jan 2011 04:33:42 +0000 Subject: bnx2x: Mark full duplex on some external PHYs Device may show incorrect duplex mode for devices with external PHY Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 500258d38cf1..f5fd33ea0976 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -4408,6 +4408,7 @@ static u8 bnx2x_8073_read_status(struct bnx2x_phy *phy, } bnx2x_ext_phy_10G_an_resolve(bp, phy, vars); bnx2x_8073_resolve_fc(phy, params, vars); + vars->duplex = DUPLEX_FULL; } return link_up; } @@ -5154,6 +5155,7 @@ static u8 bnx2x_8706_8726_read_status(struct bnx2x_phy *phy, else vars->line_speed = SPEED_10000; bnx2x_ext_phy_resolve_fc(phy, params, vars); + vars->duplex = DUPLEX_FULL; } return link_up; } @@ -5850,8 +5852,11 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy, DP(NETIF_MSG_LINK, "port %x: External link is down\n", params->port); } - if (link_up) + if (link_up) { bnx2x_ext_phy_resolve_fc(phy, params, vars); + vars->duplex = DUPLEX_FULL; + DP(NETIF_MSG_LINK, "duplex = 0x%x\n", vars->duplex); + } if ((DUAL_MEDIA(params)) && (phy->req_line_speed == SPEED_1000)) { @@ -6218,6 +6223,7 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy, /* Check link 10G */ if (val2 & (1<<11)) { vars->line_speed = SPEED_10000; + vars->duplex = DUPLEX_FULL; link_up = 1; bnx2x_ext_phy_10G_an_resolve(bp, phy, vars); } else { /* Check Legacy speed link */ @@ -6581,6 +6587,7 @@ static u8 bnx2x_7101_read_status(struct bnx2x_phy *phy, MDIO_AN_DEVAD, MDIO_AN_REG_MASTER_STATUS, &val2); vars->line_speed = SPEED_10000; + vars->duplex = DUPLEX_FULL; DP(NETIF_MSG_LINK, "SFX7101 AN status 0x%x->Master=%x\n", val2, (val2 & (1<<14))); bnx2x_ext_phy_10G_an_resolve(bp, phy, vars); -- cgit v1.2.1 From f25b3c8b5f696cf74adfb37c9d9982c72f4106c9 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 18 Jan 2011 04:33:47 +0000 Subject: bnx2x: Fix BCM84823 LED behavior Fix BCM84823 LED behavior which may show on some systems Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 18 +++++++++++++++++- drivers/net/bnx2x/bnx2x_reg.h | 4 ++++ 2 files changed, 21 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index f5fd33ea0976..bb1c81156d0f 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -5972,10 +5972,26 @@ static void bnx2x_848xx_set_led(struct bnx2x *bp, MDIO_PMA_REG_8481_LED2_MASK, 0x18); + /* Select activity source by Tx and Rx, as suggested by PHY AE */ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED3_MASK, - 0x0040); + 0x0006); + + /* Select the closest activity blink rate to that in 10/100/1000 */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_BLINK, + 0); + + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_84823_CTL_LED_CTL_1, &val); + val |= MDIO_PMA_REG_84823_LED3_STRETCH_EN; /* stretch_en for LED3*/ + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_84823_CTL_LED_CTL_1, val); /* 'Interrupt Mask' */ bnx2x_cl45_write(bp, phy, diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h index 38ef7ca9f21d..73efc9bbfe7c 100644 --- a/drivers/net/bnx2x/bnx2x_reg.h +++ b/drivers/net/bnx2x/bnx2x_reg.h @@ -6194,7 +6194,11 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER 0x0000 #define MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER 0x0100 #define MDIO_CTL_REG_84823_MEDIA_FIBER_1G 0x1000 +#define MDIO_CTL_REG_84823_USER_CTRL_REG 0x4005 +#define MDIO_CTL_REG_84823_USER_CTRL_CMS 0x0080 +#define MDIO_PMA_REG_84823_CTL_LED_CTL_1 0xa8e3 +#define MDIO_PMA_REG_84823_LED3_STRETCH_EN 0x0080 #define IGU_FUNC_BASE 0x0400 -- cgit v1.2.1 From 82a0d4757c03687894123b197ec9c40f7dd16800 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 18 Jan 2011 04:33:52 +0000 Subject: bnx2x: Fix AER setting for BCM57712 Fix AER settings for BCM57712 to allow accessing all device addresses range in CL45 MDC/MDIO Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index bb1c81156d0f..7160ec51093e 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -1573,7 +1573,7 @@ static void bnx2x_set_aer_mmd_xgxs(struct link_params *params, offset = phy->addr + ser_lane; if (CHIP_IS_E2(bp)) - aer_val = 0x2800 + offset - 1; + aer_val = 0x3800 + offset - 1; else aer_val = 0x3800 + offset; CL45_WR_OVER_CL22(bp, phy, -- cgit v1.2.1 From 6aefc522a8680f7b5a794f14dc78d6eab1cfdc37 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 18 Jan 2011 04:33:55 +0000 Subject: bnx2x: Update bnx2x version to 1.62.00-4 Update bnx2x version to 1.62.00-4 Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h index 6a858a29db56..e56a45c3e739 100644 --- a/drivers/net/bnx2x/bnx2x.h +++ b/drivers/net/bnx2x/bnx2x.h @@ -22,8 +22,8 @@ * (you will need to reboot afterwards) */ /* #define BNX2X_STOP_ON_ERROR */ -#define DRV_MODULE_VERSION "1.62.00-3" -#define DRV_MODULE_RELDATE "2010/12/21" +#define DRV_MODULE_VERSION "1.62.00-4" +#define DRV_MODULE_RELDATE "2011/01/18" #define BNX2X_BC_VER 0x040200 #define BNX2X_MULTI_QUEUE -- cgit v1.2.1 From 1956cc52e73984a39252994f0beee458fc0d8909 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 17 Jan 2011 10:24:57 +0000 Subject: ns83820: Avoid bad pointer deref in ns83820_init_one(). In drivers/net/ns83820.c::ns83820_init_one() we dynamically allocate memory via alloc_etherdev(). We then call PRIV() on the returned storage which is 'return netdev_priv()'. netdev_priv() takes the pointer it is passed and adds 'ALIGN(sizeof(struct net_device), NETDEV_ALIGN)' to it and returns it. Then we test the resulting pointer for NULL, which it is unlikely to be at this point, and later dereference it. This will go bad if alloc_etherdev() actually returned NULL. This patch reworks the code slightly so that we test for a NULL pointer (and return -ENOMEM) directly after calling alloc_etherdev(). Signed-off-by: Jesper Juhl Signed-off-by: Benjamin LaHaise Signed-off-by: David S. Miller --- drivers/net/ns83820.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index 84134c766f3a..a41b2cf4d917 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -1988,12 +1988,11 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, } ndev = alloc_etherdev(sizeof(struct ns83820)); - dev = PRIV(ndev); - err = -ENOMEM; - if (!dev) + if (!ndev) goto out; + dev = PRIV(ndev); dev->ndev = ndev; spin_lock_init(&dev->rx_info.lock); -- cgit v1.2.1 From f742aa8acb7e50a383f6d2b00b1c52e081970d38 Mon Sep 17 00:00:00 2001 From: Alexey Orishko Date: Mon, 17 Jan 2011 07:07:25 +0000 Subject: USB CDC NCM: tx_fixup() race condition fix - tx_fixup() can be called from either timer callback or from xmit() in usbnet, so spinlock is added to avoid concurrency-related problem. - minor correction due to checkpatch warning for some line over 80 chars after previous patch was applied. Signed-off-by: Alexey Orishko Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index d776c4a8d3c1..04e8ce14a1d0 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -54,7 +54,7 @@ #include #include -#define DRIVER_VERSION "30-Nov-2010" +#define DRIVER_VERSION "17-Jan-2011" /* CDC NCM subclass 3.2.1 */ #define USB_CDC_NCM_NDP16_LENGTH_MIN 0x10 @@ -868,15 +868,19 @@ static void cdc_ncm_tx_timeout(unsigned long arg) if (ctx->tx_timer_pending != 0) { ctx->tx_timer_pending--; restart = 1; - } else + } else { restart = 0; + } spin_unlock(&ctx->mtx); - if (restart) + if (restart) { + spin_lock(&ctx->mtx); cdc_ncm_tx_timeout_start(ctx); - else if (ctx->netdev != NULL) + spin_unlock(&ctx->mtx); + } else if (ctx->netdev != NULL) { usbnet_start_xmit(NULL, ctx->netdev); + } } static struct sk_buff * @@ -900,7 +904,6 @@ cdc_ncm_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) skb_out = cdc_ncm_fill_tx_frame(ctx, skb); if (ctx->tx_curr_skb != NULL) need_timer = 1; - spin_unlock(&ctx->mtx); /* Start timer, if there is a remaining skb */ if (need_timer) @@ -908,6 +911,8 @@ cdc_ncm_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) if (skb_out) dev->net->stats.tx_packets += ctx->tx_curr_frame_num; + + spin_unlock(&ctx->mtx); return skb_out; error: @@ -1020,8 +1025,8 @@ static int cdc_ncm_rx_fixup(struct usbnet *dev, struct sk_buff *skb_in) if (((offset + temp) > actlen) || (temp > CDC_NCM_MAX_DATAGRAM_SIZE) || (temp < ETH_HLEN)) { pr_debug("invalid frame detected (ignored)" - "offset[%u]=%u, length=%u, skb=%p\n", - x, offset, temp, skb_in); + "offset[%u]=%u, length=%u, skb=%p\n", + x, offset, temp, skb_in); if (!x) goto error; break; -- cgit v1.2.1 From 5ae2f66fe4626340d4fd9d26b522ce377c780a56 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 13 Jan 2011 21:47:42 +0000 Subject: net/irda/sh_irda: return to RX mode when TX error sh_irda can not use RX/TX in same time, but this driver didn't return to RX mode when TX error occurred. This patch care xmit error case to solve this issue. Signed-off-by: Kuninori Morimoto Signed-off-by: David S. Miller --- drivers/net/irda/sh_irda.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/irda/sh_irda.c b/drivers/net/irda/sh_irda.c index 9e3f4f54281d..4488bd581eca 100644 --- a/drivers/net/irda/sh_irda.c +++ b/drivers/net/irda/sh_irda.c @@ -635,7 +635,7 @@ static int sh_irda_hard_xmit(struct sk_buff *skb, struct net_device *ndev) ret = sh_irda_set_baudrate(self, speed); if (ret < 0) - return ret; + goto sh_irda_hard_xmit_end; self->tx_buff.len = 0; if (skb->len) { @@ -652,11 +652,21 @@ static int sh_irda_hard_xmit(struct sk_buff *skb, struct net_device *ndev) sh_irda_write(self, IRTFLR, self->tx_buff.len); sh_irda_write(self, IRTCTR, ARMOD | TE); - } + } else + goto sh_irda_hard_xmit_end; dev_kfree_skb(skb); return 0; + +sh_irda_hard_xmit_end: + sh_irda_set_baudrate(self, 9600); + netif_wake_queue(self->ndev); + sh_irda_rcv_ctrl(self, 1); + dev_kfree_skb(skb); + + return ret; + } static int sh_irda_ioctl(struct net_device *ndev, struct ifreq *ifreq, int cmd) -- cgit v1.2.1 From ff76015f3bdfbc482c723cb4f2559cef84d178ca Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 18 Jan 2011 02:36:02 +0000 Subject: gianfar: Fix misleading indentation in startup_gfar() Just stumbled upon the issue while looking for another bug. The code looks correct, the indentation is not. Signed-off-by: Anton Vorontsov Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index f1d4b450e797..5f4ea0f46596 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1919,7 +1919,7 @@ int startup_gfar(struct net_device *ndev) if (err) { for (j = 0; j < i; j++) free_grp_irqs(&priv->gfargrp[j]); - goto irq_fail; + goto irq_fail; } } -- cgit v1.2.1 From be33b76a974cdb4ceadc1a12fb79cc97bcfeea37 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 16 Jan 2011 20:37:52 +0100 Subject: ACPICA: Fix memory leak in acpi_ev_asynch_execute_gpe_method(). We will leak the memory allocated to 'local_gpe_event_info' if 'acpi_ut_acquire_mutex()' fails or if 'acpi_ev_valid_gpe_event()' fails in drivers/acpi/acpica/evgpe.c::acpi_ev_asynch_execute_gpe_method(). Signed-off-by: Jesper Juhl Reviewed-by: Rafael Wysocki Signed-off-by: Len Brown --- drivers/acpi/acpica/evgpe.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index 7c339d34ab42..b6de1fb34f44 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -471,6 +471,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); if (ACPI_FAILURE(status)) { + ACPI_FREE(local_gpe_event_info); return_VOID; } @@ -478,6 +479,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) if (!acpi_ev_valid_gpe_event(gpe_event_info)) { status = acpi_ut_release_mutex(ACPI_MTX_EVENTS); + ACPI_FREE(local_gpe_event_info); return_VOID; } -- cgit v1.2.1 From 5d3131f5b0ae6303d042fd91ed9147ad4ae4bf6d Mon Sep 17 00:00:00 2001 From: Dana Myers Date: Wed, 12 Jan 2011 09:09:31 +0800 Subject: ACPICA: Fix namespace race condition Fixes a race condition between method execution and namespace walks that can possibly fault. Problem was apparently introduced in version 20100528 as a result of a performance optimization that reduces the number of namespace walks upon method exit by using the delete_namespace_subtree function instead of the delete_namespace_by_owner function used previously. Bug is in the delete_namespace_subtree function. Signed-off-by: Dana Myers Signed-off-by: Bob Moore Signed-off-by: Lin Ming Reviewed-by: Rafael Wysocki Signed-off-by: Len Brown --- drivers/acpi/acpica/nsalloc.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c index 1e5ff803d9ad..222a23e838d6 100644 --- a/drivers/acpi/acpica/nsalloc.c +++ b/drivers/acpi/acpica/nsalloc.c @@ -341,6 +341,7 @@ void acpi_ns_delete_namespace_subtree(struct acpi_namespace_node *parent_node) { struct acpi_namespace_node *child_node = NULL; u32 level = 1; + acpi_status status; ACPI_FUNCTION_TRACE(ns_delete_namespace_subtree); @@ -348,6 +349,13 @@ void acpi_ns_delete_namespace_subtree(struct acpi_namespace_node *parent_node) return_VOID; } + /* Lock namespace for possible update */ + + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return_VOID; + } + /* * Traverse the tree of objects until we bubble back up * to where we started. @@ -397,6 +405,7 @@ void acpi_ns_delete_namespace_subtree(struct acpi_namespace_node *parent_node) } } + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); return_VOID; } -- cgit v1.2.1 From 672af843abfc9a41c7ec792722e04b6c68a3cfea Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 12 Jan 2011 09:13:31 +0800 Subject: ACPICA: Debugger: Lock namespace for duration of a namespace dump Prevents issues if the namespace is changing underneath the debugger. Especially temporary nodes, since the debugger displays these also. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Reviewed-by: Rafael Wysocki Signed-off-by: Len Brown --- drivers/acpi/acpica/nsdump.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c index a54dc39e304b..82693c3eb257 100644 --- a/drivers/acpi/acpica/nsdump.c +++ b/drivers/acpi/acpica/nsdump.c @@ -624,9 +624,22 @@ acpi_ns_dump_objects(acpi_object_type type, acpi_owner_id owner_id, acpi_handle start_handle) { struct acpi_walk_info info; + acpi_status status; ACPI_FUNCTION_ENTRY(); + /* + * Just lock the entire namespace for the duration of the dump. + * We don't want any changes to the namespace during this time, + * especially the temporary nodes since we are going to display + * them also. + */ + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + acpi_os_printf("Could not acquire namespace mutex\n"); + return; + } + info.debug_level = ACPI_LV_TABLES; info.owner_id = owner_id; info.display_type = display_type; @@ -636,6 +649,8 @@ acpi_ns_dump_objects(acpi_object_type type, ACPI_NS_WALK_TEMP_NODES, acpi_ns_dump_one_object, NULL, (void *)&info, NULL); + + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); } #endif /* ACPI_FUTURE_USAGE */ -- cgit v1.2.1 From 262948428878fb340127faca1791acb17146122e Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Wed, 12 Jan 2011 09:19:43 +0800 Subject: ACPICA: Fix issues/fault with automatic "serialized" method support History: This support changes a method to "serialized" on the fly if the method generates an AE_ALREADY_EXISTS error, indicating the possibility that it cannot handle reentrancy. This fix repairs a couple of issues seen in the field, especially on machines with many cores. 1) Delete method children only upon the exit of the last thread, so as to not delete objects out from under running threads. 2) Set the "serialized" bit for the method only upon the exit of the last thread, so as to not cause deadlock when running threads attempt to exit. 3) Cleanup the use of the AML "MethodFlags" and internal method flags so that there is no longer any confustion between the two. Reported-by: Dana Myers Signed-off-by: Lin Ming Signed-off-by: Bob Moore Signed-off-by: Len Brown --- drivers/acpi/acpica/acobject.h | 14 +++++++--- drivers/acpi/acpica/amlcode.h | 8 +----- drivers/acpi/acpica/dsmethod.c | 62 ++++++++++++++++++++++++++++++++---------- drivers/acpi/acpica/evrgnini.c | 4 +-- drivers/acpi/acpica/excreate.c | 8 +++--- drivers/acpi/acpica/exdump.c | 2 +- drivers/acpi/acpica/nsaccess.c | 6 ++-- drivers/acpi/acpica/nsalloc.c | 4 +-- drivers/acpi/acpica/nseval.c | 2 +- drivers/acpi/acpica/nsxfname.c | 5 ++-- drivers/acpi/acpica/psloop.c | 2 +- drivers/acpi/acpica/psparse.c | 25 ++++++----------- drivers/acpi/acpica/psxface.c | 7 ++--- 13 files changed, 85 insertions(+), 64 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h index bdbfaf22bd14..efaf9c6090f5 100644 --- a/drivers/acpi/acpica/acobject.h +++ b/drivers/acpi/acpica/acobject.h @@ -97,8 +97,6 @@ #define AOPOBJ_OBJECT_INITIALIZED 0x08 /* Region is initialized, _REG was run */ #define AOPOBJ_SETUP_COMPLETE 0x10 /* Region setup is complete */ #define AOPOBJ_INVALID 0x20 /* Host OS won't allow a Region address */ -#define AOPOBJ_MODULE_LEVEL 0x40 /* Method is actually module-level code */ -#define AOPOBJ_MODIFIED_NAMESPACE 0x80 /* Method modified the namespace */ /****************************************************************************** * @@ -175,7 +173,7 @@ struct acpi_object_region { }; struct acpi_object_method { - ACPI_OBJECT_COMMON_HEADER u8 method_flags; + ACPI_OBJECT_COMMON_HEADER u8 info_flags; u8 param_count; u8 sync_level; union acpi_operand_object *mutex; @@ -183,13 +181,21 @@ struct acpi_object_method { union { ACPI_INTERNAL_METHOD implementation; union acpi_operand_object *handler; - } extra; + } dispatch; u32 aml_length; u8 thread_count; acpi_owner_id owner_id; }; +/* Flags for info_flags field above */ + +#define ACPI_METHOD_MODULE_LEVEL 0x01 /* Method is actually module-level code */ +#define ACPI_METHOD_INTERNAL_ONLY 0x02 /* Method is implemented internally (_OSI) */ +#define ACPI_METHOD_SERIALIZED 0x04 /* Method is serialized */ +#define ACPI_METHOD_SERIALIZED_PENDING 0x08 /* Method is to be marked serialized */ +#define ACPI_METHOD_MODIFIED_NAMESPACE 0x10 /* Method modified the namespace */ + /****************************************************************************** * * Objects that can be notified. All share a common notify_info area. diff --git a/drivers/acpi/acpica/amlcode.h b/drivers/acpi/acpica/amlcode.h index 1f484ba228fc..ac1f561ce392 100644 --- a/drivers/acpi/acpica/amlcode.h +++ b/drivers/acpi/acpica/amlcode.h @@ -480,16 +480,10 @@ typedef enum { AML_FIELD_ATTRIB_SMB_BLOCK_CALL = 0x0D } AML_ACCESS_ATTRIBUTE; -/* Bit fields in method_flags byte */ +/* Bit fields in the AML method_flags byte */ #define AML_METHOD_ARG_COUNT 0x07 #define AML_METHOD_SERIALIZED 0x08 #define AML_METHOD_SYNC_LEVEL 0xF0 -/* METHOD_FLAGS_ARG_COUNT is not used internally, define additional flags */ - -#define AML_METHOD_INTERNAL_ONLY 0x01 -#define AML_METHOD_RESERVED1 0x02 -#define AML_METHOD_RESERVED2 0x04 - #endif /* __AMLCODE_H__ */ diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c index d94dd8974b55..5a79f401a113 100644 --- a/drivers/acpi/acpica/dsmethod.c +++ b/drivers/acpi/acpica/dsmethod.c @@ -43,7 +43,6 @@ #include #include "accommon.h" -#include "amlcode.h" #include "acdispat.h" #include "acinterp.h" #include "acnamesp.h" @@ -201,7 +200,7 @@ acpi_ds_begin_method_execution(struct acpi_namespace_node *method_node, /* * If this method is serialized, we need to acquire the method mutex. */ - if (obj_desc->method.method_flags & AML_METHOD_SERIALIZED) { + if (obj_desc->method.info_flags & ACPI_METHOD_SERIALIZED) { /* * Create a mutex for the method if it is defined to be Serialized * and a mutex has not already been created. We defer the mutex creation @@ -413,8 +412,9 @@ acpi_ds_call_control_method(struct acpi_thread_state *thread, /* Invoke an internal method if necessary */ - if (obj_desc->method.method_flags & AML_METHOD_INTERNAL_ONLY) { - status = obj_desc->method.extra.implementation(next_walk_state); + if (obj_desc->method.info_flags & ACPI_METHOD_INTERNAL_ONLY) { + status = + obj_desc->method.dispatch.implementation(next_walk_state); if (status == AE_OK) { status = AE_CTRL_TERMINATE; } @@ -579,11 +579,14 @@ acpi_ds_terminate_control_method(union acpi_operand_object *method_desc, /* * Delete any namespace objects created anywhere within the - * namespace by the execution of this method. Unless this method - * is a module-level executable code method, in which case we - * want make the objects permanent. + * namespace by the execution of this method. Unless: + * 1) This method is a module-level executable code method, in which + * case we want make the objects permanent. + * 2) There are other threads executing the method, in which case we + * will wait until the last thread has completed. */ - if (!(method_desc->method.flags & AOPOBJ_MODULE_LEVEL)) { + if (!(method_desc->method.info_flags & ACPI_METHOD_MODULE_LEVEL) + && (method_desc->method.thread_count == 1)) { /* Delete any direct children of (created by) this method */ @@ -593,12 +596,17 @@ acpi_ds_terminate_control_method(union acpi_operand_object *method_desc, /* * Delete any objects that were created by this method * elsewhere in the namespace (if any were created). + * Use of the ACPI_METHOD_MODIFIED_NAMESPACE optimizes the + * deletion such that we don't have to perform an entire + * namespace walk for every control method execution. */ if (method_desc->method. - flags & AOPOBJ_MODIFIED_NAMESPACE) { + info_flags & ACPI_METHOD_MODIFIED_NAMESPACE) { acpi_ns_delete_namespace_by_owner(method_desc-> method. owner_id); + method_desc->method.info_flags &= + ~ACPI_METHOD_MODIFIED_NAMESPACE; } } } @@ -629,19 +637,43 @@ acpi_ds_terminate_control_method(union acpi_operand_object *method_desc, * Serialized if it appears that the method is incorrectly written and * does not support multiple thread execution. The best example of this * is if such a method creates namespace objects and blocks. A second - * thread will fail with an AE_ALREADY_EXISTS exception + * thread will fail with an AE_ALREADY_EXISTS exception. * * This code is here because we must wait until the last thread exits - * before creating the synchronization semaphore. + * before marking the method as serialized. */ - if ((method_desc->method.method_flags & AML_METHOD_SERIALIZED) - && (!method_desc->method.mutex)) { - (void)acpi_ds_create_method_mutex(method_desc); + if (method_desc->method. + info_flags & ACPI_METHOD_SERIALIZED_PENDING) { + if (walk_state) { + ACPI_INFO((AE_INFO, + "Marking method %4.4s as Serialized because of AE_ALREADY_EXISTS error", + walk_state->method_node->name. + ascii)); + } + + /* + * Method tried to create an object twice and was marked as + * "pending serialized". The probable cause is that the method + * cannot handle reentrancy. + * + * The method was created as not_serialized, but it tried to create + * a named object and then blocked, causing the second thread + * entrance to begin and then fail. Workaround this problem by + * marking the method permanently as Serialized when the last + * thread exits here. + */ + method_desc->method.info_flags &= + ~ACPI_METHOD_SERIALIZED_PENDING; + method_desc->method.info_flags |= + ACPI_METHOD_SERIALIZED; + method_desc->method.sync_level = 0; } /* No more threads, we can free the owner_id */ - if (!(method_desc->method.flags & AOPOBJ_MODULE_LEVEL)) { + if (! + (method_desc->method. + info_flags & ACPI_METHOD_MODULE_LEVEL)) { acpi_ut_release_owner_id(&method_desc->method.owner_id); } } diff --git a/drivers/acpi/acpica/evrgnini.c b/drivers/acpi/acpica/evrgnini.c index 0b47a6dc9290..2ef32e952559 100644 --- a/drivers/acpi/acpica/evrgnini.c +++ b/drivers/acpi/acpica/evrgnini.c @@ -590,9 +590,9 @@ acpi_ev_initialize_region(union acpi_operand_object *region_obj, * See acpi_ns_exec_module_code */ if (obj_desc->method. - flags & AOPOBJ_MODULE_LEVEL) { + info_flags & ACPI_METHOD_MODULE_LEVEL) { handler_obj = - obj_desc->method.extra.handler; + obj_desc->method.dispatch.handler; } break; diff --git a/drivers/acpi/acpica/excreate.c b/drivers/acpi/acpica/excreate.c index 3c61b48c73f5..ffac8c7e54c5 100644 --- a/drivers/acpi/acpica/excreate.c +++ b/drivers/acpi/acpica/excreate.c @@ -482,13 +482,11 @@ acpi_ex_create_method(u8 * aml_start, obj_desc->method.aml_length = aml_length; /* - * Disassemble the method flags. Split off the Arg Count - * for efficiency + * Disassemble the method flags. Split off the arg_count, Serialized + * flag, and sync_level for efficiency. */ method_flags = (u8) operand[1]->integer.value; - obj_desc->method.method_flags = - (u8) (method_flags & ~AML_METHOD_ARG_COUNT); obj_desc->method.param_count = (u8) (method_flags & AML_METHOD_ARG_COUNT); @@ -497,6 +495,8 @@ acpi_ex_create_method(u8 * aml_start, * created for this method when it is parsed. */ if (method_flags & AML_METHOD_SERIALIZED) { + obj_desc->method.info_flags = ACPI_METHOD_SERIALIZED; + /* * ACPI 1.0: sync_level = 0 * ACPI 2.0: sync_level = sync_level in method declaration diff --git a/drivers/acpi/acpica/exdump.c b/drivers/acpi/acpica/exdump.c index f067bbb0d961..ff4b1e61c318 100644 --- a/drivers/acpi/acpica/exdump.c +++ b/drivers/acpi/acpica/exdump.c @@ -122,7 +122,7 @@ static struct acpi_exdump_info acpi_ex_dump_event[2] = { static struct acpi_exdump_info acpi_ex_dump_method[9] = { {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_method), NULL}, - {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.method_flags), "Method Flags"}, + {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.info_flags), "Info Flags"}, {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.param_count), "Parameter Count"}, {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(method.sync_level), "Sync Level"}, diff --git a/drivers/acpi/acpica/nsaccess.c b/drivers/acpi/acpica/nsaccess.c index 0cd925be5fc1..cede0e3200e4 100644 --- a/drivers/acpi/acpica/nsaccess.c +++ b/drivers/acpi/acpica/nsaccess.c @@ -163,9 +163,9 @@ acpi_status acpi_ns_root_initialize(void) #else /* Mark this as a very SPECIAL method */ - obj_desc->method.method_flags = - AML_METHOD_INTERNAL_ONLY; - obj_desc->method.extra.implementation = + obj_desc->method.info_flags = + ACPI_METHOD_INTERNAL_ONLY; + obj_desc->method.dispatch.implementation = acpi_ut_osi_implementation; #endif break; diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c index 222a23e838d6..222a9843268d 100644 --- a/drivers/acpi/acpica/nsalloc.c +++ b/drivers/acpi/acpica/nsalloc.c @@ -234,8 +234,8 @@ void acpi_ns_install_node(struct acpi_walk_state *walk_state, struct acpi_namesp * modified the namespace. This is used for cleanup when the * method exits. */ - walk_state->method_desc->method.flags |= - AOPOBJ_MODIFIED_NAMESPACE; + walk_state->method_desc->method.info_flags |= + ACPI_METHOD_MODIFIED_NAMESPACE; } } diff --git a/drivers/acpi/acpica/nseval.c b/drivers/acpi/acpica/nseval.c index f52829cc294b..a55c0d2295ca 100644 --- a/drivers/acpi/acpica/nseval.c +++ b/drivers/acpi/acpica/nseval.c @@ -389,7 +389,7 @@ acpi_ns_exec_module_code(union acpi_operand_object *method_obj, * acpi_gbl_root_node->Object is NULL at PASS1. */ if ((type == ACPI_TYPE_DEVICE) && parent_node->object) { - method_obj->method.extra.handler = + method_obj->method.dispatch.handler = parent_node->object->device.handler; } diff --git a/drivers/acpi/acpica/nsxfname.c b/drivers/acpi/acpica/nsxfname.c index b01e45a415e3..0a26d73e050a 100644 --- a/drivers/acpi/acpica/nsxfname.c +++ b/drivers/acpi/acpica/nsxfname.c @@ -603,10 +603,9 @@ acpi_status acpi_install_method(u8 *buffer) method_obj->method.param_count = (u8) (method_flags & AML_METHOD_ARG_COUNT); - method_obj->method.method_flags = (u8) - (method_flags & ~AML_METHOD_ARG_COUNT); - if (method_flags & AML_METHOD_SERIALIZED) { + method_obj->method.info_flags = ACPI_METHOD_SERIALIZED; + method_obj->method.sync_level = (u8) ((method_flags & AML_METHOD_SYNC_LEVEL) >> 4); } diff --git a/drivers/acpi/acpica/psloop.c b/drivers/acpi/acpica/psloop.c index 2f2e7760938c..06edeaf3b5e5 100644 --- a/drivers/acpi/acpica/psloop.c +++ b/drivers/acpi/acpica/psloop.c @@ -655,7 +655,7 @@ acpi_ps_link_module_code(union acpi_parse_object *parent_op, method_obj->method.aml_start = aml_start; method_obj->method.aml_length = aml_length; method_obj->method.owner_id = owner_id; - method_obj->method.flags |= AOPOBJ_MODULE_LEVEL; + method_obj->method.info_flags |= ACPI_METHOD_MODULE_LEVEL; /* * Save the parent node in next_object. This is cheating, but we diff --git a/drivers/acpi/acpica/psparse.c b/drivers/acpi/acpica/psparse.c index 8d81542194d4..3b8de113b571 100644 --- a/drivers/acpi/acpica/psparse.c +++ b/drivers/acpi/acpica/psparse.c @@ -55,7 +55,6 @@ #include "acparser.h" #include "acdispat.h" #include "amlcode.h" -#include "acnamesp.h" #include "acinterp.h" #define _COMPONENT ACPI_PARSER @@ -539,24 +538,16 @@ acpi_status acpi_ps_parse_aml(struct acpi_walk_state *walk_state) /* Check for possible multi-thread reentrancy problem */ if ((status == AE_ALREADY_EXISTS) && - (!walk_state->method_desc->method.mutex)) { - ACPI_INFO((AE_INFO, - "Marking method %4.4s as Serialized because of AE_ALREADY_EXISTS error", - walk_state->method_node->name. - ascii)); - + (!(walk_state->method_desc->method. + info_flags & ACPI_METHOD_SERIALIZED))) { /* - * Method tried to create an object twice. The probable cause is - * that the method cannot handle reentrancy. - * - * The method is marked not_serialized, but it tried to create - * a named object, causing the second thread entrance to fail. - * Workaround this problem by marking the method permanently - * as Serialized. + * Method is not serialized and tried to create an object + * twice. The probable cause is that the method cannot + * handle reentrancy. Mark as "pending serialized" now, and + * then mark "serialized" when the last thread exits. */ - walk_state->method_desc->method.method_flags |= - AML_METHOD_SERIALIZED; - walk_state->method_desc->method.sync_level = 0; + walk_state->method_desc->method.info_flags |= + ACPI_METHOD_SERIALIZED_PENDING; } } diff --git a/drivers/acpi/acpica/psxface.c b/drivers/acpi/acpica/psxface.c index c42f067cff9d..bc49a80c386d 100644 --- a/drivers/acpi/acpica/psxface.c +++ b/drivers/acpi/acpica/psxface.c @@ -47,7 +47,6 @@ #include "acdispat.h" #include "acinterp.h" #include "actables.h" -#include "amlcode.h" #define _COMPONENT ACPI_PARSER ACPI_MODULE_NAME("psxface") @@ -285,15 +284,15 @@ acpi_status acpi_ps_execute_method(struct acpi_evaluate_info *info) goto cleanup; } - if (info->obj_desc->method.flags & AOPOBJ_MODULE_LEVEL) { + if (info->obj_desc->method.info_flags & ACPI_METHOD_MODULE_LEVEL) { walk_state->parse_flags |= ACPI_PARSE_MODULE_LEVEL; } /* Invoke an internal method if necessary */ - if (info->obj_desc->method.method_flags & AML_METHOD_INTERNAL_ONLY) { + if (info->obj_desc->method.info_flags & ACPI_METHOD_INTERNAL_ONLY) { status = - info->obj_desc->method.extra.implementation(walk_state); + info->obj_desc->method.dispatch.implementation(walk_state); info->return_object = walk_state->return_desc; /* Cleanup states */ -- cgit v1.2.1 From b4e104eaeb8cd4329a23e0e4ebf166681b1d182d Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Mon, 17 Jan 2011 11:05:40 +0800 Subject: ACPICA: Update all ACPICA copyrights and signons to 2011 Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/accommon.h | 2 +- drivers/acpi/acpica/acconfig.h | 2 +- drivers/acpi/acpica/acdebug.h | 2 +- drivers/acpi/acpica/acdispat.h | 2 +- drivers/acpi/acpica/acevents.h | 2 +- drivers/acpi/acpica/acglobal.h | 2 +- drivers/acpi/acpica/achware.h | 2 +- drivers/acpi/acpica/acinterp.h | 2 +- drivers/acpi/acpica/aclocal.h | 2 +- drivers/acpi/acpica/acmacros.h | 2 +- drivers/acpi/acpica/acnamesp.h | 2 +- drivers/acpi/acpica/acobject.h | 2 +- drivers/acpi/acpica/acopcode.h | 2 +- drivers/acpi/acpica/acparser.h | 2 +- drivers/acpi/acpica/acpredef.h | 2 +- drivers/acpi/acpica/acresrc.h | 2 +- drivers/acpi/acpica/acstruct.h | 2 +- drivers/acpi/acpica/actables.h | 2 +- drivers/acpi/acpica/acutils.h | 2 +- drivers/acpi/acpica/amlcode.h | 2 +- drivers/acpi/acpica/amlresrc.h | 2 +- drivers/acpi/acpica/dsfield.c | 2 +- drivers/acpi/acpica/dsinit.c | 2 +- drivers/acpi/acpica/dsmethod.c | 2 +- drivers/acpi/acpica/dsmthdat.c | 2 +- drivers/acpi/acpica/dsobject.c | 2 +- drivers/acpi/acpica/dsopcode.c | 2 +- drivers/acpi/acpica/dsutils.c | 2 +- drivers/acpi/acpica/dswexec.c | 2 +- drivers/acpi/acpica/dswload.c | 2 +- drivers/acpi/acpica/dswscope.c | 2 +- drivers/acpi/acpica/dswstate.c | 2 +- drivers/acpi/acpica/evevent.c | 2 +- drivers/acpi/acpica/evgpe.c | 2 +- drivers/acpi/acpica/evgpeblk.c | 2 +- drivers/acpi/acpica/evgpeinit.c | 2 +- drivers/acpi/acpica/evgpeutil.c | 2 +- drivers/acpi/acpica/evmisc.c | 2 +- drivers/acpi/acpica/evregion.c | 2 +- drivers/acpi/acpica/evrgnini.c | 2 +- drivers/acpi/acpica/evsci.c | 2 +- drivers/acpi/acpica/evxface.c | 2 +- drivers/acpi/acpica/evxfevnt.c | 2 +- drivers/acpi/acpica/evxfgpe.c | 2 +- drivers/acpi/acpica/evxfregn.c | 2 +- drivers/acpi/acpica/exconfig.c | 2 +- drivers/acpi/acpica/exconvrt.c | 2 +- drivers/acpi/acpica/excreate.c | 2 +- drivers/acpi/acpica/exdebug.c | 2 +- drivers/acpi/acpica/exdump.c | 2 +- drivers/acpi/acpica/exfield.c | 2 +- drivers/acpi/acpica/exfldio.c | 2 +- drivers/acpi/acpica/exmisc.c | 2 +- drivers/acpi/acpica/exmutex.c | 2 +- drivers/acpi/acpica/exnames.c | 2 +- drivers/acpi/acpica/exoparg1.c | 2 +- drivers/acpi/acpica/exoparg2.c | 2 +- drivers/acpi/acpica/exoparg3.c | 2 +- drivers/acpi/acpica/exoparg6.c | 2 +- drivers/acpi/acpica/exprep.c | 2 +- drivers/acpi/acpica/exregion.c | 2 +- drivers/acpi/acpica/exresnte.c | 2 +- drivers/acpi/acpica/exresolv.c | 2 +- drivers/acpi/acpica/exresop.c | 2 +- drivers/acpi/acpica/exstore.c | 2 +- drivers/acpi/acpica/exstoren.c | 2 +- drivers/acpi/acpica/exstorob.c | 2 +- drivers/acpi/acpica/exsystem.c | 2 +- drivers/acpi/acpica/exutils.c | 2 +- drivers/acpi/acpica/hwacpi.c | 2 +- drivers/acpi/acpica/hwgpe.c | 2 +- drivers/acpi/acpica/hwpci.c | 2 +- drivers/acpi/acpica/hwregs.c | 2 +- drivers/acpi/acpica/hwsleep.c | 2 +- drivers/acpi/acpica/hwtimer.c | 2 +- drivers/acpi/acpica/hwvalid.c | 2 +- drivers/acpi/acpica/hwxface.c | 2 +- drivers/acpi/acpica/nsaccess.c | 2 +- drivers/acpi/acpica/nsalloc.c | 2 +- drivers/acpi/acpica/nsdump.c | 2 +- drivers/acpi/acpica/nsdumpdv.c | 2 +- drivers/acpi/acpica/nseval.c | 2 +- drivers/acpi/acpica/nsinit.c | 2 +- drivers/acpi/acpica/nsload.c | 2 +- drivers/acpi/acpica/nsnames.c | 2 +- drivers/acpi/acpica/nsobject.c | 2 +- drivers/acpi/acpica/nsparse.c | 2 +- drivers/acpi/acpica/nspredef.c | 2 +- drivers/acpi/acpica/nsrepair.c | 2 +- drivers/acpi/acpica/nsrepair2.c | 2 +- drivers/acpi/acpica/nssearch.c | 2 +- drivers/acpi/acpica/nsutils.c | 2 +- drivers/acpi/acpica/nswalk.c | 2 +- drivers/acpi/acpica/nsxfeval.c | 2 +- drivers/acpi/acpica/nsxfname.c | 2 +- drivers/acpi/acpica/nsxfobj.c | 2 +- drivers/acpi/acpica/psargs.c | 2 +- drivers/acpi/acpica/psloop.c | 2 +- drivers/acpi/acpica/psopcode.c | 2 +- drivers/acpi/acpica/psparse.c | 2 +- drivers/acpi/acpica/psscope.c | 2 +- drivers/acpi/acpica/pstree.c | 2 +- drivers/acpi/acpica/psutils.c | 2 +- drivers/acpi/acpica/pswalk.c | 2 +- drivers/acpi/acpica/psxface.c | 2 +- drivers/acpi/acpica/rsaddr.c | 2 +- drivers/acpi/acpica/rscalc.c | 2 +- drivers/acpi/acpica/rscreate.c | 2 +- drivers/acpi/acpica/rsdump.c | 2 +- drivers/acpi/acpica/rsinfo.c | 2 +- drivers/acpi/acpica/rsio.c | 2 +- drivers/acpi/acpica/rsirq.c | 2 +- drivers/acpi/acpica/rslist.c | 2 +- drivers/acpi/acpica/rsmemory.c | 2 +- drivers/acpi/acpica/rsmisc.c | 2 +- drivers/acpi/acpica/rsutils.c | 2 +- drivers/acpi/acpica/rsxface.c | 2 +- drivers/acpi/acpica/tbfadt.c | 2 +- drivers/acpi/acpica/tbfind.c | 2 +- drivers/acpi/acpica/tbinstal.c | 2 +- drivers/acpi/acpica/tbutils.c | 2 +- drivers/acpi/acpica/tbxface.c | 2 +- drivers/acpi/acpica/tbxfroot.c | 2 +- drivers/acpi/acpica/utalloc.c | 2 +- drivers/acpi/acpica/utcopy.c | 2 +- drivers/acpi/acpica/utdebug.c | 2 +- drivers/acpi/acpica/utdelete.c | 2 +- drivers/acpi/acpica/uteval.c | 2 +- drivers/acpi/acpica/utglobal.c | 2 +- drivers/acpi/acpica/utids.c | 2 +- drivers/acpi/acpica/utinit.c | 2 +- drivers/acpi/acpica/utlock.c | 2 +- drivers/acpi/acpica/utmath.c | 2 +- drivers/acpi/acpica/utmisc.c | 2 +- drivers/acpi/acpica/utmutex.c | 2 +- drivers/acpi/acpica/utobject.c | 2 +- drivers/acpi/acpica/utosi.c | 2 +- drivers/acpi/acpica/utresrc.c | 2 +- drivers/acpi/acpica/utstate.c | 2 +- drivers/acpi/acpica/utxface.c | 2 +- drivers/acpi/acpica/utxferror.c | 2 +- 141 files changed, 141 insertions(+), 141 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h index 3e50c74ed4a1..e0ba17f0a7c8 100644 --- a/drivers/acpi/acpica/accommon.h +++ b/drivers/acpi/acpica/accommon.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h index b17d8de9f6ff..ab87396c2c07 100644 --- a/drivers/acpi/acpica/acconfig.h +++ b/drivers/acpi/acpica/acconfig.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/acdebug.h b/drivers/acpi/acpica/acdebug.h index 72e9d5eb083c..eb0b1f8dee6d 100644 --- a/drivers/acpi/acpica/acdebug.h +++ b/drivers/acpi/acpica/acdebug.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/acdispat.h b/drivers/acpi/acpica/acdispat.h index 894a0ff2a946..666271b65418 100644 --- a/drivers/acpi/acpica/acdispat.h +++ b/drivers/acpi/acpica/acdispat.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index 70e0b28801aa..41d247daf461 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 9bb69c59bb12..c129a295da3c 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index 258d628793ea..e7213beaafc7 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/acinterp.h b/drivers/acpi/acpica/acinterp.h index 049e203bd621..3731e1c34b83 100644 --- a/drivers/acpi/acpica/acinterp.h +++ b/drivers/acpi/acpica/acinterp.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 74000f5b7dab..54784bb42cec 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h index 8d5c9e0a495f..b7491ee1fba6 100644 --- a/drivers/acpi/acpica/acmacros.h +++ b/drivers/acpi/acpica/acmacros.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h index d44d3bc5b847..79a598c67fe3 100644 --- a/drivers/acpi/acpica/acnamesp.h +++ b/drivers/acpi/acpica/acnamesp.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h index efaf9c6090f5..a0272e6792bf 100644 --- a/drivers/acpi/acpica/acobject.h +++ b/drivers/acpi/acpica/acobject.h @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/acopcode.h b/drivers/acpi/acpica/acopcode.h index 8c15ff43f42b..bb2ccfad7376 100644 --- a/drivers/acpi/acpica/acopcode.h +++ b/drivers/acpi/acpica/acopcode.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/acparser.h b/drivers/acpi/acpica/acparser.h index d0bb0fd3e57a..5ea1e06afa20 100644 --- a/drivers/acpi/acpica/acparser.h +++ b/drivers/acpi/acpica/acparser.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h index 10998d369ad0..94e73c97cf85 100644 --- a/drivers/acpi/acpica/acpredef.h +++ b/drivers/acpi/acpica/acpredef.h @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/acresrc.h b/drivers/acpi/acpica/acresrc.h index 528bcbaf4ce7..f08b55b7f3a0 100644 --- a/drivers/acpi/acpica/acresrc.h +++ b/drivers/acpi/acpica/acresrc.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/acstruct.h b/drivers/acpi/acpica/acstruct.h index 6e5dd97949fe..1623b245dde2 100644 --- a/drivers/acpi/acpica/acstruct.h +++ b/drivers/acpi/acpica/acstruct.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/actables.h b/drivers/acpi/acpica/actables.h index 62a576e34361..967f08124eba 100644 --- a/drivers/acpi/acpica/actables.h +++ b/drivers/acpi/acpica/actables.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h index 72e4183c1937..99c140d8e348 100644 --- a/drivers/acpi/acpica/acutils.h +++ b/drivers/acpi/acpica/acutils.h @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/amlcode.h b/drivers/acpi/acpica/amlcode.h index ac1f561ce392..f4f0998d3967 100644 --- a/drivers/acpi/acpica/amlcode.h +++ b/drivers/acpi/acpica/amlcode.h @@ -7,7 +7,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/amlresrc.h b/drivers/acpi/acpica/amlresrc.h index 0e5798fcbb19..59122cde247c 100644 --- a/drivers/acpi/acpica/amlresrc.h +++ b/drivers/acpi/acpica/amlresrc.h @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/dsfield.c b/drivers/acpi/acpica/dsfield.c index 347bee1726f1..34be60c0e448 100644 --- a/drivers/acpi/acpica/dsfield.c +++ b/drivers/acpi/acpica/dsfield.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/dsinit.c b/drivers/acpi/acpica/dsinit.c index cc4a38c57558..a7718bf2b9a1 100644 --- a/drivers/acpi/acpica/dsinit.c +++ b/drivers/acpi/acpica/dsinit.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c index 5a79f401a113..5d797751e205 100644 --- a/drivers/acpi/acpica/dsmethod.c +++ b/drivers/acpi/acpica/dsmethod.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/dsmthdat.c b/drivers/acpi/acpica/dsmthdat.c index 8095306fcd8c..905ce29a92e1 100644 --- a/drivers/acpi/acpica/dsmthdat.c +++ b/drivers/acpi/acpica/dsmthdat.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c index 8e85f54a8e0e..f42e17e5c252 100644 --- a/drivers/acpi/acpica/dsobject.c +++ b/drivers/acpi/acpica/dsobject.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c index 7c0e74227171..bbecf293aeeb 100644 --- a/drivers/acpi/acpica/dsopcode.c +++ b/drivers/acpi/acpica/dsopcode.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/dsutils.c b/drivers/acpi/acpica/dsutils.c index 15135c25aa9b..2c477ce172fa 100644 --- a/drivers/acpi/acpica/dsutils.c +++ b/drivers/acpi/acpica/dsutils.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/dswexec.c b/drivers/acpi/acpica/dswexec.c index 6b0b5d08d97a..fe40e4c6554f 100644 --- a/drivers/acpi/acpica/dswexec.c +++ b/drivers/acpi/acpica/dswexec.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/dswload.c b/drivers/acpi/acpica/dswload.c index 140a9d002959..52566ff5e903 100644 --- a/drivers/acpi/acpica/dswload.c +++ b/drivers/acpi/acpica/dswload.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/dswscope.c b/drivers/acpi/acpica/dswscope.c index d1e701709dac..76a661fc1e09 100644 --- a/drivers/acpi/acpica/dswscope.c +++ b/drivers/acpi/acpica/dswscope.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/dswstate.c b/drivers/acpi/acpica/dswstate.c index 83155dd8671e..a6c374ef9914 100644 --- a/drivers/acpi/acpica/dswstate.c +++ b/drivers/acpi/acpica/dswstate.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/evevent.c b/drivers/acpi/acpica/evevent.c index e5e313c663a5..d458b041e651 100644 --- a/drivers/acpi/acpica/evevent.c +++ b/drivers/acpi/acpica/evevent.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index b6de1fb34f44..14988a86066f 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index 9acb86958c09..ca2c41a53311 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c index c59dc2340593..ce9aa9f9a972 100644 --- a/drivers/acpi/acpica/evgpeinit.c +++ b/drivers/acpi/acpica/evgpeinit.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/evgpeutil.c b/drivers/acpi/acpica/evgpeutil.c index 10e477494dcf..80a81d0c4a80 100644 --- a/drivers/acpi/acpica/evgpeutil.c +++ b/drivers/acpi/acpica/evgpeutil.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index fcaed9fb44ff..ccd230b7aba4 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c index 98fd210e87b2..785a5ee64585 100644 --- a/drivers/acpi/acpica/evregion.c +++ b/drivers/acpi/acpica/evregion.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/evrgnini.c b/drivers/acpi/acpica/evrgnini.c index 2ef32e952559..9659cee6093e 100644 --- a/drivers/acpi/acpica/evrgnini.c +++ b/drivers/acpi/acpica/evrgnini.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/evsci.c b/drivers/acpi/acpica/evsci.c index 8dfbaa96e422..2ebd40e1a3ef 100644 --- a/drivers/acpi/acpica/evsci.c +++ b/drivers/acpi/acpica/evsci.c @@ -6,7 +6,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c index 1226689bdb1b..e1141402dbed 100644 --- a/drivers/acpi/acpica/evxface.c +++ b/drivers/acpi/acpica/evxface.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c index 90488c1e0f3d..c57b5c707a77 100644 --- a/drivers/acpi/acpica/evxfevnt.c +++ b/drivers/acpi/acpica/evxfevnt.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c index 416845bc9c1f..e9562a7cb2f9 100644 --- a/drivers/acpi/acpica/evxfgpe.c +++ b/drivers/acpi/acpica/evxfgpe.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/evxfregn.c b/drivers/acpi/acpica/evxfregn.c index ce9314f79451..eb7386763712 100644 --- a/drivers/acpi/acpica/evxfregn.c +++ b/drivers/acpi/acpica/evxfregn.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c index 18832205b631..745a42b401f5 100644 --- a/drivers/acpi/acpica/exconfig.c +++ b/drivers/acpi/acpica/exconfig.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c index b73bc50c5b76..74162a11817d 100644 --- a/drivers/acpi/acpica/exconvrt.c +++ b/drivers/acpi/acpica/exconvrt.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/excreate.c b/drivers/acpi/acpica/excreate.c index ffac8c7e54c5..e7b372d17667 100644 --- a/drivers/acpi/acpica/excreate.c +++ b/drivers/acpi/acpica/excreate.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exdebug.c b/drivers/acpi/acpica/exdebug.c index be8c98b480d7..c7a2f1edd282 100644 --- a/drivers/acpi/acpica/exdebug.c +++ b/drivers/acpi/acpica/exdebug.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exdump.c b/drivers/acpi/acpica/exdump.c index ff4b1e61c318..61b8c0e8b74d 100644 --- a/drivers/acpi/acpica/exdump.c +++ b/drivers/acpi/acpica/exdump.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c index f17d2ff0031b..0bde2230c028 100644 --- a/drivers/acpi/acpica/exfield.c +++ b/drivers/acpi/acpica/exfield.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c index 38293fd3e088..6c79c29f082d 100644 --- a/drivers/acpi/acpica/exfldio.c +++ b/drivers/acpi/acpica/exfldio.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exmisc.c b/drivers/acpi/acpica/exmisc.c index 95db4be0877b..703d88ed0b3d 100644 --- a/drivers/acpi/acpica/exmisc.c +++ b/drivers/acpi/acpica/exmisc.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exmutex.c b/drivers/acpi/acpica/exmutex.c index 6af14e43f839..be1c56ead653 100644 --- a/drivers/acpi/acpica/exmutex.c +++ b/drivers/acpi/acpica/exmutex.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exnames.c b/drivers/acpi/acpica/exnames.c index d11e539ef763..49ec049c157e 100644 --- a/drivers/acpi/acpica/exnames.c +++ b/drivers/acpi/acpica/exnames.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exoparg1.c b/drivers/acpi/acpica/exoparg1.c index 84e4d185aa25..236ead14b7f7 100644 --- a/drivers/acpi/acpica/exoparg1.c +++ b/drivers/acpi/acpica/exoparg1.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exoparg2.c b/drivers/acpi/acpica/exoparg2.c index 10e104cf0fb9..2571b4a310f4 100644 --- a/drivers/acpi/acpica/exoparg2.c +++ b/drivers/acpi/acpica/exoparg2.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exoparg3.c b/drivers/acpi/acpica/exoparg3.c index 7a08d23befcd..1b48d9d28c9a 100644 --- a/drivers/acpi/acpica/exoparg3.c +++ b/drivers/acpi/acpica/exoparg3.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exoparg6.c b/drivers/acpi/acpica/exoparg6.c index 4b50730cf9a0..f4a2787e8e92 100644 --- a/drivers/acpi/acpica/exoparg6.c +++ b/drivers/acpi/acpica/exoparg6.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c index 7aae29f73d3f..cc95e2000406 100644 --- a/drivers/acpi/acpica/exprep.c +++ b/drivers/acpi/acpica/exprep.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c index de17e10da0ed..f0d5e14f1f2c 100644 --- a/drivers/acpi/acpica/exregion.c +++ b/drivers/acpi/acpica/exregion.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exresnte.c b/drivers/acpi/acpica/exresnte.c index 1fa4289a687e..55997e46948b 100644 --- a/drivers/acpi/acpica/exresnte.c +++ b/drivers/acpi/acpica/exresnte.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exresolv.c b/drivers/acpi/acpica/exresolv.c index 7ca35ea8acea..db502cd7d934 100644 --- a/drivers/acpi/acpica/exresolv.c +++ b/drivers/acpi/acpica/exresolv.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exresop.c b/drivers/acpi/acpica/exresop.c index 8c97cfd6a0fd..e3bb00ccdff5 100644 --- a/drivers/acpi/acpica/exresop.c +++ b/drivers/acpi/acpica/exresop.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exstore.c b/drivers/acpi/acpica/exstore.c index 1624436ba4c5..c0c8842dd344 100644 --- a/drivers/acpi/acpica/exstore.c +++ b/drivers/acpi/acpica/exstore.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exstoren.c b/drivers/acpi/acpica/exstoren.c index d4af684620ca..a979017d56b8 100644 --- a/drivers/acpi/acpica/exstoren.c +++ b/drivers/acpi/acpica/exstoren.c @@ -7,7 +7,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exstorob.c b/drivers/acpi/acpica/exstorob.c index e972b667b09b..dc665cc554de 100644 --- a/drivers/acpi/acpica/exstorob.c +++ b/drivers/acpi/acpica/exstorob.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exsystem.c b/drivers/acpi/acpica/exsystem.c index 675aaa91a770..df66e7b686be 100644 --- a/drivers/acpi/acpica/exsystem.c +++ b/drivers/acpi/acpica/exsystem.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/exutils.c b/drivers/acpi/acpica/exutils.c index 4093522eed45..8ad93146dd32 100644 --- a/drivers/acpi/acpica/exutils.c +++ b/drivers/acpi/acpica/exutils.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c index b44274a0b62c..fc380d3d45ab 100644 --- a/drivers/acpi/acpica/hwacpi.c +++ b/drivers/acpi/acpica/hwacpi.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index 85c3cbd4304d..f610d88a66be 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/hwpci.c b/drivers/acpi/acpica/hwpci.c index ad21c7d8bf4f..050fd227951b 100644 --- a/drivers/acpi/acpica/hwpci.c +++ b/drivers/acpi/acpica/hwpci.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c index 5d1273b660ae..55accb7018bb 100644 --- a/drivers/acpi/acpica/hwregs.c +++ b/drivers/acpi/acpica/hwregs.c @@ -7,7 +7,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index 3796811276ac..2ac28bbe8827 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c index 1ef8e0bb250b..9c8eb71a12fb 100644 --- a/drivers/acpi/acpica/hwtimer.c +++ b/drivers/acpi/acpica/hwtimer.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c index e1d9c777b213..5f1605874655 100644 --- a/drivers/acpi/acpica/hwvalid.c +++ b/drivers/acpi/acpica/hwvalid.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c index 50cc3be77724..6f98d210e71c 100644 --- a/drivers/acpi/acpica/hwxface.c +++ b/drivers/acpi/acpica/hwxface.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nsaccess.c b/drivers/acpi/acpica/nsaccess.c index cede0e3200e4..d93172fd15a8 100644 --- a/drivers/acpi/acpica/nsaccess.c +++ b/drivers/acpi/acpica/nsaccess.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c index 222a9843268d..1d0ef15d158f 100644 --- a/drivers/acpi/acpica/nsalloc.c +++ b/drivers/acpi/acpica/nsalloc.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c index 82693c3eb257..b683cc2ff9d3 100644 --- a/drivers/acpi/acpica/nsdump.c +++ b/drivers/acpi/acpica/nsdump.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nsdumpdv.c b/drivers/acpi/acpica/nsdumpdv.c index d2a97921e249..2ed294b7a4db 100644 --- a/drivers/acpi/acpica/nsdumpdv.c +++ b/drivers/acpi/acpica/nsdumpdv.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nseval.c b/drivers/acpi/acpica/nseval.c index a55c0d2295ca..c1bd02b1a058 100644 --- a/drivers/acpi/acpica/nseval.c +++ b/drivers/acpi/acpica/nseval.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c index 660a2728908d..4622852eca5e 100644 --- a/drivers/acpi/acpica/nsinit.c +++ b/drivers/acpi/acpica/nsinit.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nsload.c b/drivers/acpi/acpica/nsload.c index df18be94fefe..5f7dc691c183 100644 --- a/drivers/acpi/acpica/nsload.c +++ b/drivers/acpi/acpica/nsload.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nsnames.c b/drivers/acpi/acpica/nsnames.c index d3104af57e13..d5fa520c3de5 100644 --- a/drivers/acpi/acpica/nsnames.c +++ b/drivers/acpi/acpica/nsnames.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nsobject.c b/drivers/acpi/acpica/nsobject.c index 41a9213dd5af..3bb8bf105ea2 100644 --- a/drivers/acpi/acpica/nsobject.c +++ b/drivers/acpi/acpica/nsobject.c @@ -6,7 +6,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nsparse.c b/drivers/acpi/acpica/nsparse.c index 5808c89e9fac..b3234fa795b8 100644 --- a/drivers/acpi/acpica/nsparse.c +++ b/drivers/acpi/acpica/nsparse.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c index 7096bcda0c72..9fb03fa8ffde 100644 --- a/drivers/acpi/acpica/nspredef.c +++ b/drivers/acpi/acpica/nspredef.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c index d1c136692667..1d76ac85b5e7 100644 --- a/drivers/acpi/acpica/nsrepair.c +++ b/drivers/acpi/acpica/nsrepair.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c index 4ef9f43ea926..973883babee1 100644 --- a/drivers/acpi/acpica/nsrepair2.c +++ b/drivers/acpi/acpica/nsrepair2.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nssearch.c b/drivers/acpi/acpica/nssearch.c index 41102a84272f..28b0d7a62b99 100644 --- a/drivers/acpi/acpica/nssearch.c +++ b/drivers/acpi/acpica/nssearch.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c index a7d6ad9c111b..cb1b104a69a2 100644 --- a/drivers/acpi/acpica/nsutils.c +++ b/drivers/acpi/acpica/nsutils.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nswalk.c b/drivers/acpi/acpica/nswalk.c index 2cd5be8fe10f..345f0c3c6ad2 100644 --- a/drivers/acpi/acpica/nswalk.c +++ b/drivers/acpi/acpica/nswalk.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nsxfeval.c b/drivers/acpi/acpica/nsxfeval.c index ebef8a7fd707..c53f0040e490 100644 --- a/drivers/acpi/acpica/nsxfeval.c +++ b/drivers/acpi/acpica/nsxfeval.c @@ -6,7 +6,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nsxfname.c b/drivers/acpi/acpica/nsxfname.c index 0a26d73e050a..3fd4526f3dba 100644 --- a/drivers/acpi/acpica/nsxfname.c +++ b/drivers/acpi/acpica/nsxfname.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/nsxfobj.c b/drivers/acpi/acpica/nsxfobj.c index a1f04e9b8030..db7660f8b869 100644 --- a/drivers/acpi/acpica/nsxfobj.c +++ b/drivers/acpi/acpica/nsxfobj.c @@ -6,7 +6,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c index 7df1a4c95274..e1fad0ee0136 100644 --- a/drivers/acpi/acpica/psargs.c +++ b/drivers/acpi/acpica/psargs.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/psloop.c b/drivers/acpi/acpica/psloop.c index 06edeaf3b5e5..01dd70d1de51 100644 --- a/drivers/acpi/acpica/psloop.c +++ b/drivers/acpi/acpica/psloop.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/psopcode.c b/drivers/acpi/acpica/psopcode.c index 2b0c3be2b1b8..bed08de7528c 100644 --- a/drivers/acpi/acpica/psopcode.c +++ b/drivers/acpi/acpica/psopcode.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/psparse.c b/drivers/acpi/acpica/psparse.c index 3b8de113b571..9bb0cbd37b5e 100644 --- a/drivers/acpi/acpica/psparse.c +++ b/drivers/acpi/acpica/psparse.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/psscope.c b/drivers/acpi/acpica/psscope.c index 40e2b279ea12..a5faa1323a02 100644 --- a/drivers/acpi/acpica/psscope.c +++ b/drivers/acpi/acpica/psscope.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/pstree.c b/drivers/acpi/acpica/pstree.c index d4b970c3630b..f1464c03aa42 100644 --- a/drivers/acpi/acpica/pstree.c +++ b/drivers/acpi/acpica/pstree.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/psutils.c b/drivers/acpi/acpica/psutils.c index fe29eee5adb1..7eda78503422 100644 --- a/drivers/acpi/acpica/psutils.c +++ b/drivers/acpi/acpica/psutils.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/pswalk.c b/drivers/acpi/acpica/pswalk.c index 8abb9629443d..3312d6368bf1 100644 --- a/drivers/acpi/acpica/pswalk.c +++ b/drivers/acpi/acpica/pswalk.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/psxface.c b/drivers/acpi/acpica/psxface.c index bc49a80c386d..8086805d4494 100644 --- a/drivers/acpi/acpica/psxface.c +++ b/drivers/acpi/acpica/psxface.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/rsaddr.c b/drivers/acpi/acpica/rsaddr.c index 226c806ae986..9e66f9078426 100644 --- a/drivers/acpi/acpica/rsaddr.c +++ b/drivers/acpi/acpica/rsaddr.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c index d6ebf7ec622d..3a8a89ec2ca4 100644 --- a/drivers/acpi/acpica/rscalc.c +++ b/drivers/acpi/acpica/rscalc.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c index c80a2eea3a01..4ce6e1147e80 100644 --- a/drivers/acpi/acpica/rscreate.c +++ b/drivers/acpi/acpica/rscreate.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/rsdump.c b/drivers/acpi/acpica/rsdump.c index f859b0386fe4..33db7520c74b 100644 --- a/drivers/acpi/acpica/rsdump.c +++ b/drivers/acpi/acpica/rsdump.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/rsinfo.c b/drivers/acpi/acpica/rsinfo.c index 1fd868b964fd..f9ea60872aa4 100644 --- a/drivers/acpi/acpica/rsinfo.c +++ b/drivers/acpi/acpica/rsinfo.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/rsio.c b/drivers/acpi/acpica/rsio.c index 33bff17c0bbc..0c7efef008be 100644 --- a/drivers/acpi/acpica/rsio.c +++ b/drivers/acpi/acpica/rsio.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/rsirq.c b/drivers/acpi/acpica/rsirq.c index 545da40d7fa7..50b8ad211167 100644 --- a/drivers/acpi/acpica/rsirq.c +++ b/drivers/acpi/acpica/rsirq.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/rslist.c b/drivers/acpi/acpica/rslist.c index 7335f22aac20..1bfcef736c50 100644 --- a/drivers/acpi/acpica/rslist.c +++ b/drivers/acpi/acpica/rslist.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/rsmemory.c b/drivers/acpi/acpica/rsmemory.c index 887b8ba8c432..7cc6d8625f1e 100644 --- a/drivers/acpi/acpica/rsmemory.c +++ b/drivers/acpi/acpica/rsmemory.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/rsmisc.c b/drivers/acpi/acpica/rsmisc.c index f8cd9e87d987..410264b22a29 100644 --- a/drivers/acpi/acpica/rsmisc.c +++ b/drivers/acpi/acpica/rsmisc.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c index 491191e6cf69..231811e56939 100644 --- a/drivers/acpi/acpica/rsutils.c +++ b/drivers/acpi/acpica/rsutils.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/rsxface.c b/drivers/acpi/acpica/rsxface.c index 9f6a6e7e1c8e..2ff657a28f26 100644 --- a/drivers/acpi/acpica/rsxface.c +++ b/drivers/acpi/acpica/rsxface.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c index d2ff4325c427..428d44e2d162 100644 --- a/drivers/acpi/acpica/tbfadt.c +++ b/drivers/acpi/acpica/tbfadt.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/tbfind.c b/drivers/acpi/acpica/tbfind.c index 989d5c867864..a55cb2bb5abb 100644 --- a/drivers/acpi/acpica/tbfind.c +++ b/drivers/acpi/acpica/tbfind.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c index 83d7af8d0905..48db0944ce4a 100644 --- a/drivers/acpi/acpica/tbinstal.c +++ b/drivers/acpi/acpica/tbinstal.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index 34f9c2bc5e1f..0f2d395feaba 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c index 4a8b9e6ea57a..4b7085dfc683 100644 --- a/drivers/acpi/acpica/tbxface.c +++ b/drivers/acpi/acpica/tbxface.c @@ -6,7 +6,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/tbxfroot.c b/drivers/acpi/acpica/tbxfroot.c index fd2c07d1d3ac..7eb6c6cc1edf 100644 --- a/drivers/acpi/acpica/tbxfroot.c +++ b/drivers/acpi/acpica/tbxfroot.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utalloc.c b/drivers/acpi/acpica/utalloc.c index 8f0896281567..0a697351cf69 100644 --- a/drivers/acpi/acpica/utalloc.c +++ b/drivers/acpi/acpica/utalloc.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utcopy.c b/drivers/acpi/acpica/utcopy.c index 6fef83f04bcd..aded299a2fa8 100644 --- a/drivers/acpi/acpica/utcopy.c +++ b/drivers/acpi/acpica/utcopy.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c index f21c486929a5..a9bcd816dc29 100644 --- a/drivers/acpi/acpica/utdebug.c +++ b/drivers/acpi/acpica/utdebug.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c index ed794cd033ea..31f5a7832ef1 100644 --- a/drivers/acpi/acpica/utdelete.c +++ b/drivers/acpi/acpica/utdelete.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/uteval.c b/drivers/acpi/acpica/uteval.c index 22f59ef604e0..18f73c9d10bc 100644 --- a/drivers/acpi/acpica/uteval.c +++ b/drivers/acpi/acpica/uteval.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c index 508537f884ac..97dd9bbf055a 100644 --- a/drivers/acpi/acpica/utglobal.c +++ b/drivers/acpi/acpica/utglobal.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utids.c b/drivers/acpi/acpica/utids.c index d2906328535d..b679ea693545 100644 --- a/drivers/acpi/acpica/utids.c +++ b/drivers/acpi/acpica/utids.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utinit.c b/drivers/acpi/acpica/utinit.c index c1b1c803ea9b..191b6828cce9 100644 --- a/drivers/acpi/acpica/utinit.c +++ b/drivers/acpi/acpica/utinit.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utlock.c b/drivers/acpi/acpica/utlock.c index b081cd46a15f..f6bb75c6faf5 100644 --- a/drivers/acpi/acpica/utlock.c +++ b/drivers/acpi/acpica/utlock.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utmath.c b/drivers/acpi/acpica/utmath.c index 49cf7b7fd816..ce481da9bb45 100644 --- a/drivers/acpi/acpica/utmath.c +++ b/drivers/acpi/acpica/utmath.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c index c7d0e05ef5a4..c33a852d4f42 100644 --- a/drivers/acpi/acpica/utmisc.c +++ b/drivers/acpi/acpica/utmisc.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c index d9efa495b433..a429a74dcffa 100644 --- a/drivers/acpi/acpica/utmutex.c +++ b/drivers/acpi/acpica/utmutex.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utobject.c b/drivers/acpi/acpica/utobject.c index fd1fa2749ea5..188340a017b4 100644 --- a/drivers/acpi/acpica/utobject.c +++ b/drivers/acpi/acpica/utobject.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utosi.c b/drivers/acpi/acpica/utosi.c index 18c59a85fdca..1fb10cb8f11d 100644 --- a/drivers/acpi/acpica/utosi.c +++ b/drivers/acpi/acpica/utosi.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c index 7965919000b1..84e051844247 100644 --- a/drivers/acpi/acpica/utresrc.c +++ b/drivers/acpi/acpica/utresrc.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utstate.c b/drivers/acpi/acpica/utstate.c index d35d109b8da2..30c21e1a9360 100644 --- a/drivers/acpi/acpica/utstate.c +++ b/drivers/acpi/acpica/utstate.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c index 1f484c9a6888..98ad125e14ff 100644 --- a/drivers/acpi/acpica/utxface.c +++ b/drivers/acpi/acpica/utxface.c @@ -5,7 +5,7 @@ *****************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without diff --git a/drivers/acpi/acpica/utxferror.c b/drivers/acpi/acpica/utxferror.c index 6f12e314fbae..916ae097c43c 100644 --- a/drivers/acpi/acpica/utxferror.c +++ b/drivers/acpi/acpica/utxferror.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2010, Intel Corp. + * Copyright (C) 2000 - 2011, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without -- cgit v1.2.1 From 8a5a778665efb3a5f16ebb6fbc13356907e45775 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 19 Jan 2011 08:16:29 +0000 Subject: sh: update INTC to clear IRQ sense valid flag Clear the valid flag is in the INTC code. Without this fix bit 7 of the sense register is mistakenly set. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/sh/intc/chip.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c index de885a0f917a..f33e2dd97934 100644 --- a/drivers/sh/intc/chip.c +++ b/drivers/sh/intc/chip.c @@ -173,7 +173,8 @@ int intc_set_priority(unsigned int irq, unsigned int prio) return 0; } -#define VALID(x) (x | 0x80) +#define SENSE_VALID_FLAG 0x80 +#define VALID(x) (x | SENSE_VALID_FLAG) static unsigned char intc_irq_sense_table[IRQ_TYPE_SENSE_MASK + 1] = { [IRQ_TYPE_EDGE_FALLING] = VALID(0), @@ -201,7 +202,8 @@ static int intc_set_type(struct irq_data *data, unsigned int type) ihp = intc_find_irq(d->sense, d->nr_sense, irq); if (ihp) { addr = INTC_REG(d, _INTC_ADDR_E(ihp->handle), 0); - intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle, value); + intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle, + value & ~SENSE_VALID_FLAG); } return 0; -- cgit v1.2.1 From f037484337ce009ff840de07ca3232808101db09 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 3 Jan 2011 07:33:25 -0300 Subject: [media] tda9875: remove duplicate driver In commit 411674fd189abe5910ea4caf08b7eac5c4a4d967 the tda9875 support was added to tvaudio. This means that tda9875 is no longer used since mid-2009. If there are out-of-tree users of this driver, then they can switch to tvaudio instead. The original commit message read as follows: This change allows bttv to use tvaudio for this device. Since this device has the same i2c address as the tda9874 we need to support both in the same tvaudio driver. This makes it possible for tvaudio to detect which chip is used. Originally the tda9875 was only available in the dedicated tda9875 driver, but that makes life very hard for bttv since loading tvaudio might misdetect a tda9875 as a tda9874. So there were good reasons for moving the tda9875 code into tvaudio. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Kconfig | 9 - drivers/media/video/Makefile | 1 - drivers/media/video/tda9875.c | 411 ------------------------------------------ 3 files changed, 421 deletions(-) delete mode 100644 drivers/media/video/tda9875.c (limited to 'drivers') diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index eb875af05e79..ef3e9852f37e 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -141,15 +141,6 @@ config VIDEO_TDA9840 To compile this driver as a module, choose M here: the module will be called tda9840. -config VIDEO_TDA9875 - tristate "Philips TDA9875 audio processor" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for tda9875 audio decoder chip found on some bt8xx boards. - - To compile this driver as a module, choose M here: the - module will be called tda9875. - config VIDEO_TEA6415C tristate "Philips TEA6415C audio processor" depends on I2C diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 81e38cb0b846..a509d317e258 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_VIDEO_V4L2_COMMON) += v4l2-common.o obj-$(CONFIG_VIDEO_TUNER) += tuner.o obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o -obj-$(CONFIG_VIDEO_TDA9875) += tda9875.o obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c deleted file mode 100644 index 35b6ff5db319..000000000000 --- a/drivers/media/video/tda9875.c +++ /dev/null @@ -1,411 +0,0 @@ -/* - * For the TDA9875 chip - * (The TDA9875 is used on the Diamond DTV2000 french version - * Other cards probably use these chips as well.) - * This driver will not complain if used with any - * other i2c device with the same address. - * - * Copyright (c) 2000 Guillaume Delvit based on Gerd Knorr source and - * Eric Sandeen - * Copyright (c) 2006 Mauro Carvalho Chehab - * This code is placed under the terms of the GNU General Public License - * Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu) - * Which was based on tda8425.c by Greg Alexander (c) 1998 - * - * OPTIONS: - * debug - set to 1 if you'd like to see debug messages - * - * Revision: 0.1 - original version - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static int debug; /* insmod parameter */ -module_param(debug, int, S_IRUGO | S_IWUSR); -MODULE_LICENSE("GPL"); - - -/* This is a superset of the TDA9875 */ -struct tda9875 { - struct v4l2_subdev sd; - int rvol, lvol; - int bass, treble; -}; - -static inline struct tda9875 *to_state(struct v4l2_subdev *sd) -{ - return container_of(sd, struct tda9875, sd); -} - -#define dprintk if (debug) printk - -/* The TDA9875 is made by Philips Semiconductor - * http://www.semiconductors.philips.com - * TDA9875: I2C-bus controlled DSP audio processor, FM demodulator - * - */ - - /* subaddresses for TDA9875 */ -#define TDA9875_MUT 0x12 /*General mute (value --> 0b11001100*/ -#define TDA9875_CFG 0x01 /* Config register (value --> 0b00000000 */ -#define TDA9875_DACOS 0x13 /*DAC i/o select (ADC) 0b0000100*/ -#define TDA9875_LOSR 0x16 /*Line output select regirter 0b0100 0001*/ - -#define TDA9875_CH1V 0x0c /*Channel 1 volume (mute)*/ -#define TDA9875_CH2V 0x0d /*Channel 2 volume (mute)*/ -#define TDA9875_SC1 0x14 /*SCART 1 in (mono)*/ -#define TDA9875_SC2 0x15 /*SCART 2 in (mono)*/ - -#define TDA9875_ADCIS 0x17 /*ADC input select (mono) 0b0110 000*/ -#define TDA9875_AER 0x19 /*Audio effect (AVL+Pseudo) 0b0000 0110*/ -#define TDA9875_MCS 0x18 /*Main channel select (DAC) 0b0000100*/ -#define TDA9875_MVL 0x1a /* Main volume gauche */ -#define TDA9875_MVR 0x1b /* Main volume droite */ -#define TDA9875_MBA 0x1d /* Main Basse */ -#define TDA9875_MTR 0x1e /* Main treble */ -#define TDA9875_ACS 0x1f /* Auxilary channel select (FM) 0b0000000*/ -#define TDA9875_AVL 0x20 /* Auxilary volume gauche */ -#define TDA9875_AVR 0x21 /* Auxilary volume droite */ -#define TDA9875_ABA 0x22 /* Auxilary Basse */ -#define TDA9875_ATR 0x23 /* Auxilary treble */ - -#define TDA9875_MSR 0x02 /* Monitor select register */ -#define TDA9875_C1MSB 0x03 /* Carrier 1 (FM) frequency register MSB */ -#define TDA9875_C1MIB 0x04 /* Carrier 1 (FM) frequency register (16-8]b */ -#define TDA9875_C1LSB 0x05 /* Carrier 1 (FM) frequency register LSB */ -#define TDA9875_C2MSB 0x06 /* Carrier 2 (nicam) frequency register MSB */ -#define TDA9875_C2MIB 0x07 /* Carrier 2 (nicam) frequency register (16-8]b */ -#define TDA9875_C2LSB 0x08 /* Carrier 2 (nicam) frequency register LSB */ -#define TDA9875_DCR 0x09 /* Demodulateur configuration regirter*/ -#define TDA9875_DEEM 0x0a /* FM de-emphasis regirter*/ -#define TDA9875_FMAT 0x0b /* FM Matrix regirter*/ - -/* values */ -#define TDA9875_MUTE_ON 0xff /* general mute */ -#define TDA9875_MUTE_OFF 0xcc /* general no mute */ - - - -/* Begin code */ - -static int tda9875_write(struct v4l2_subdev *sd, int subaddr, unsigned char val) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - unsigned char buffer[2]; - - v4l2_dbg(1, debug, sd, "Writing %d 0x%x\n", subaddr, val); - buffer[0] = subaddr; - buffer[1] = val; - if (2 != i2c_master_send(client, buffer, 2)) { - v4l2_warn(sd, "I/O error, trying (write %d 0x%x)\n", - subaddr, val); - return -1; - } - return 0; -} - - -static int i2c_read_register(struct i2c_client *client, int addr, int reg) -{ - unsigned char write[1]; - unsigned char read[1]; - struct i2c_msg msgs[2] = { - { addr, 0, 1, write }, - { addr, I2C_M_RD, 1, read } - }; - - write[0] = reg; - - if (2 != i2c_transfer(client->adapter, msgs, 2)) { - v4l_warn(client, "I/O error (read2)\n"); - return -1; - } - v4l_dbg(1, debug, client, "chip_read2: reg%d=0x%x\n", reg, read[0]); - return read[0]; -} - -static void tda9875_set(struct v4l2_subdev *sd) -{ - struct tda9875 *tda = to_state(sd); - unsigned char a; - - v4l2_dbg(1, debug, sd, "tda9875_set(%04x,%04x,%04x,%04x)\n", - tda->lvol, tda->rvol, tda->bass, tda->treble); - - a = tda->lvol & 0xff; - tda9875_write(sd, TDA9875_MVL, a); - a =tda->rvol & 0xff; - tda9875_write(sd, TDA9875_MVR, a); - a =tda->bass & 0xff; - tda9875_write(sd, TDA9875_MBA, a); - a =tda->treble & 0xff; - tda9875_write(sd, TDA9875_MTR, a); -} - -static void do_tda9875_init(struct v4l2_subdev *sd) -{ - struct tda9875 *t = to_state(sd); - - v4l2_dbg(1, debug, sd, "In tda9875_init\n"); - tda9875_write(sd, TDA9875_CFG, 0xd0); /*reg de config 0 (reset)*/ - tda9875_write(sd, TDA9875_MSR, 0x03); /* Monitor 0b00000XXX*/ - tda9875_write(sd, TDA9875_C1MSB, 0x00); /*Car1(FM) MSB XMHz*/ - tda9875_write(sd, TDA9875_C1MIB, 0x00); /*Car1(FM) MIB XMHz*/ - tda9875_write(sd, TDA9875_C1LSB, 0x00); /*Car1(FM) LSB XMHz*/ - tda9875_write(sd, TDA9875_C2MSB, 0x00); /*Car2(NICAM) MSB XMHz*/ - tda9875_write(sd, TDA9875_C2MIB, 0x00); /*Car2(NICAM) MIB XMHz*/ - tda9875_write(sd, TDA9875_C2LSB, 0x00); /*Car2(NICAM) LSB XMHz*/ - tda9875_write(sd, TDA9875_DCR, 0x00); /*Demod config 0x00*/ - tda9875_write(sd, TDA9875_DEEM, 0x44); /*DE-Emph 0b0100 0100*/ - tda9875_write(sd, TDA9875_FMAT, 0x00); /*FM Matrix reg 0x00*/ - tda9875_write(sd, TDA9875_SC1, 0x00); /* SCART 1 (SC1)*/ - tda9875_write(sd, TDA9875_SC2, 0x01); /* SCART 2 (sc2)*/ - - tda9875_write(sd, TDA9875_CH1V, 0x10); /* Channel volume 1 mute*/ - tda9875_write(sd, TDA9875_CH2V, 0x10); /* Channel volume 2 mute */ - tda9875_write(sd, TDA9875_DACOS, 0x02); /* sig DAC i/o(in:nicam)*/ - tda9875_write(sd, TDA9875_ADCIS, 0x6f); /* sig ADC input(in:mono)*/ - tda9875_write(sd, TDA9875_LOSR, 0x00); /* line out (in:mono)*/ - tda9875_write(sd, TDA9875_AER, 0x00); /*06 Effect (AVL+PSEUDO) */ - tda9875_write(sd, TDA9875_MCS, 0x44); /* Main ch select (DAC) */ - tda9875_write(sd, TDA9875_MVL, 0x03); /* Vol Main left 10dB */ - tda9875_write(sd, TDA9875_MVR, 0x03); /* Vol Main right 10dB*/ - tda9875_write(sd, TDA9875_MBA, 0x00); /* Main Bass Main 0dB*/ - tda9875_write(sd, TDA9875_MTR, 0x00); /* Main Treble Main 0dB*/ - tda9875_write(sd, TDA9875_ACS, 0x44); /* Aux chan select (dac)*/ - tda9875_write(sd, TDA9875_AVL, 0x00); /* Vol Aux left 0dB*/ - tda9875_write(sd, TDA9875_AVR, 0x00); /* Vol Aux right 0dB*/ - tda9875_write(sd, TDA9875_ABA, 0x00); /* Aux Bass Main 0dB*/ - tda9875_write(sd, TDA9875_ATR, 0x00); /* Aux Aigus Main 0dB*/ - - tda9875_write(sd, TDA9875_MUT, 0xcc); /* General mute */ - - t->lvol = t->rvol = 0; /* 0dB */ - t->bass = 0; /* 0dB */ - t->treble = 0; /* 0dB */ - tda9875_set(sd); -} - - -static int tda9875_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - struct tda9875 *t = to_state(sd); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_VOLUME: - { - int left = (t->lvol+84)*606; - int right = (t->rvol+84)*606; - - ctrl->value=max(left,right); - return 0; - } - case V4L2_CID_AUDIO_BALANCE: - { - int left = (t->lvol+84)*606; - int right = (t->rvol+84)*606; - int volume = max(left,right); - int balance = (32768*min(left,right))/ - (volume ? volume : 1); - ctrl->value=(leftvalue = (t->bass+12)*2427; /* min -12 max +15 */ - return 0; - case V4L2_CID_AUDIO_TREBLE: - ctrl->value = (t->treble+12)*2730;/* min -12 max +12 */ - return 0; - } - return -EINVAL; -} - -static int tda9875_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - struct tda9875 *t = to_state(sd); - int chvol = 0, volume = 0, balance = 0, left, right; - - switch (ctrl->id) { - case V4L2_CID_AUDIO_VOLUME: - left = (t->lvol+84)*606; - right = (t->rvol+84)*606; - - volume = max(left,right); - balance = (32768*min(left,right))/ - (volume ? volume : 1); - balance =(leftvalue; - - chvol=1; - break; - case V4L2_CID_AUDIO_BALANCE: - left = (t->lvol+84)*606; - right = (t->rvol+84)*606; - - volume=max(left,right); - - balance = ctrl->value; - - chvol=1; - break; - case V4L2_CID_AUDIO_BASS: - t->bass = ((ctrl->value/2400)-12) & 0xff; - if (t->bass > 15) - t->bass = 15; - if (t->bass < -12) - t->bass = -12 & 0xff; - break; - case V4L2_CID_AUDIO_TREBLE: - t->treble = ((ctrl->value/2700)-12) & 0xff; - if (t->treble > 12) - t->treble = 12; - if (t->treble < -12) - t->treble = -12 & 0xff; - break; - default: - return -EINVAL; - } - - if (chvol) { - left = (min(65536 - balance,32768) * - volume) / 32768; - right = (min(balance,32768) * - volume) / 32768; - t->lvol = ((left/606)-84) & 0xff; - if (t->lvol > 24) - t->lvol = 24; - if (t->lvol < -84) - t->lvol = -84 & 0xff; - - t->rvol = ((right/606)-84) & 0xff; - if (t->rvol > 24) - t->rvol = 24; - if (t->rvol < -84) - t->rvol = -84 & 0xff; - } - - tda9875_set(sd); - return 0; -} - -static int tda9875_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 58880); - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768); - } - return -EINVAL; -} - -/* ----------------------------------------------------------------------- */ - -static const struct v4l2_subdev_core_ops tda9875_core_ops = { - .queryctrl = tda9875_queryctrl, - .g_ctrl = tda9875_g_ctrl, - .s_ctrl = tda9875_s_ctrl, -}; - -static const struct v4l2_subdev_ops tda9875_ops = { - .core = &tda9875_core_ops, -}; - -/* ----------------------------------------------------------------------- */ - - -/* *********************** * - * i2c interface functions * - * *********************** */ - -static int tda9875_checkit(struct i2c_client *client, int addr) -{ - int dic, rev; - - dic = i2c_read_register(client, addr, 254); - rev = i2c_read_register(client, addr, 255); - - if (dic == 0 || dic == 2) { /* tda9875 and tda9875A */ - v4l_info(client, "tda9875%s rev. %d detected at 0x%02x\n", - dic == 0 ? "" : "A", rev, addr << 1); - return 1; - } - v4l_info(client, "no such chip at 0x%02x (dic=0x%x rev=0x%x)\n", - addr << 1, dic, rev); - return 0; -} - -static int tda9875_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct tda9875 *t; - struct v4l2_subdev *sd; - - v4l_info(client, "chip found @ 0x%02x (%s)\n", - client->addr << 1, client->adapter->name); - - if (!tda9875_checkit(client, client->addr)) - return -ENODEV; - - t = kzalloc(sizeof(*t), GFP_KERNEL); - if (!t) - return -ENOMEM; - sd = &t->sd; - v4l2_i2c_subdev_init(sd, client, &tda9875_ops); - - do_tda9875_init(sd); - return 0; -} - -static int tda9875_remove(struct i2c_client *client) -{ - struct v4l2_subdev *sd = i2c_get_clientdata(client); - - do_tda9875_init(sd); - v4l2_device_unregister_subdev(sd); - kfree(to_state(sd)); - return 0; -} - -static const struct i2c_device_id tda9875_id[] = { - { "tda9875", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, tda9875_id); - -static struct i2c_driver tda9875_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "tda9875", - }, - .probe = tda9875_probe, - .remove = tda9875_remove, - .id_table = tda9875_id, -}; - -static __init int init_tda9875(void) -{ - return i2c_add_driver(&tda9875_driver); -} - -static __exit void exit_tda9875(void) -{ - i2c_del_driver(&tda9875_driver); -} - -module_init(init_tda9875); -module_exit(exit_tda9875); -- cgit v1.2.1 From b219ab9cfb2057de6e779169197f83265c310c83 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 3 Jan 2011 07:39:41 -0300 Subject: [media] bttv: remove obsolete 'no_tda9875' field Since tda9875 is part of tvaudio this field no longer makes sense. Remove it. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-cards.c | 39 ---------------------------------- drivers/media/video/bt8xx/bttv.h | 1 - 2 files changed, 40 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 49efcf660ba6..7f58756d72c8 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -1373,7 +1373,6 @@ struct tvcard bttv_tvcards[] = { .gpiomute = 0x1800, .audio_mode_gpio= fv2000s_audio, .no_msp34xx = 1, - .no_tda9875 = 1, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -1511,7 +1510,6 @@ struct tvcard bttv_tvcards[] = { .gpiomute = 0x09, .needs_tvaudio = 1, .no_msp34xx = 1, - .no_tda9875 = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -1550,7 +1548,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask2 = 0x07ff, .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), .no_msp34xx = 1, - .no_tda9875 = 1, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .muxsel_hook = rv605_muxsel, @@ -1686,7 +1683,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY1x0_848] = { @@ -1699,7 +1695,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, @@ -1714,7 +1709,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY1x1] = { @@ -1727,7 +1721,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY1x1_SVID] = { @@ -1740,7 +1733,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY2xx] = { @@ -1753,7 +1745,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, @@ -1768,7 +1759,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY2x0] = { @@ -1781,7 +1771,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY500] = { @@ -1794,7 +1783,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY540] = { @@ -1805,7 +1793,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, @@ -1820,7 +1807,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */ }, [BTTV_BOARD_IDS_EAGLE] = { @@ -1835,7 +1821,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 2, 2, 2), .muxsel_hook = eagle_muxsel, .no_msp34xx = 1, - .no_tda9875 = 1, .pll = PLL_28, }, [BTTV_BOARD_PINNACLESAT] = { @@ -1846,7 +1831,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .muxsel = MUXSEL(3, 1), .pll = PLL_28, @@ -1897,7 +1881,6 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .muxsel = MUXSEL(2, 0, 1), .pll = PLL_28, @@ -1970,7 +1953,6 @@ struct tvcard bttv_tvcards[] = { /* Tuner, CVid, SVid, CVid over SVid connector */ .muxsel = MUXSEL(2, 3, 1, 1), .gpiomask = 0, - .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = TUNER_PHILIPS_PAL_I, .tuner_addr = ADDR_UNSET, @@ -2017,7 +1999,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0), .muxsel_hook = xguard_muxsel, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, }, @@ -2029,7 +2010,6 @@ struct tvcard bttv_tvcards[] = { .svhs = NO_SVHS, .muxsel = MUXSEL(2, 3, 1, 0), .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, .tuner_type = TUNER_ABSENT, @@ -2134,7 +2114,6 @@ struct tvcard bttv_tvcards[] = { .svhs = NO_SVHS, /* card has no svhs */ .needs_tvaudio = 0, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .gpiomask = 0x00, .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), @@ -2156,7 +2135,6 @@ struct tvcard bttv_tvcards[] = { [BTTV_BOARD_TWINHAN_DST] = { .name = "Twinhan DST + clones", .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2171,7 +2149,6 @@ struct tvcard bttv_tvcards[] = { /* Vid In, SVid In, Vid over SVid in connector */ .muxsel = MUXSEL(3, 1, 1, 3), .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2226,7 +2203,6 @@ struct tvcard bttv_tvcards[] = { .svhs = NO_SVHS, .muxsel = MUXSEL(2, 3, 1, 0), .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .needs_tvaudio = 0, .tuner_type = TUNER_ABSENT, @@ -2278,7 +2254,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/ .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, /*878A input is always MUX0, see above.*/ .muxsel = MUXSEL(2, 2, 2, 2), @@ -2302,7 +2277,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_TEMIC_PAL, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, }, [BTTV_BOARD_AVDVBT_771] = { /* Wolfram Joost */ @@ -2313,7 +2287,6 @@ struct tvcard bttv_tvcards[] = { .tuner_addr = ADDR_UNSET, .muxsel = MUXSEL(3, 3), .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, .has_dvb = 1, @@ -2329,7 +2302,6 @@ struct tvcard bttv_tvcards[] = { .svhs = 1, .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */ .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, .tuner_type = TUNER_ABSENT, @@ -2393,7 +2365,6 @@ struct tvcard bttv_tvcards[] = { /* Chris Pascoe */ .name = "DViCO FusionHDTV DVB-T Lite", .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, .no_video = 1, @@ -2440,7 +2411,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), .pll = PLL_28, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2478,7 +2448,6 @@ struct tvcard bttv_tvcards[] = { .pll = PLL_28, .no_msp34xx = 1, .no_tda7432 = 1, - .no_tda9875 = 1, .muxsel_hook = kodicom4400r_muxsel, }, [BTTV_BOARD_KODICOM_4400R_SL] = { @@ -2500,7 +2469,6 @@ struct tvcard bttv_tvcards[] = { .pll = PLL_28, .no_msp34xx = 1, .no_tda7432 = 1, - .no_tda9875 = 1, .muxsel_hook = kodicom4400r_muxsel, }, /* ---- card 0x86---------------------------------- */ @@ -2530,7 +2498,6 @@ struct tvcard bttv_tvcards[] = { .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, .gpiomute = 0x00c00007, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .has_dvb = 1, }, @@ -2630,7 +2597,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, /* ---- card 0x8d ---------------------------------- */ @@ -2658,7 +2624,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 100000, 100002, 100002, 100000 }, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, .tuner_type = TUNER_TNF_5335MF, @@ -2674,7 +2639,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x0f, /* old: 7 */ .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */ .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2732,7 +2696,6 @@ struct tvcard bttv_tvcards[] = { .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, .gpiomute = 0x00c00007, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, /* ---- card 0x95---------------------------------- */ @@ -2874,7 +2837,6 @@ struct tvcard bttv_tvcards[] = { .pll = PLL_28, .no_msp34xx = 1, .no_tda7432 = 1, - .no_tda9875 = 1, .muxsel_hook = gv800s_muxsel, }, [BTTV_BOARD_GEOVISION_GV800S_SL] = { @@ -2899,7 +2861,6 @@ struct tvcard bttv_tvcards[] = { .pll = PLL_28, .no_msp34xx = 1, .no_tda7432 = 1, - .no_tda9875 = 1, .muxsel_hook = gv800s_muxsel, }, [BTTV_BOARD_PV183] = { diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h index fd62bf15d779..c6333595c6b9 100644 --- a/drivers/media/video/bt8xx/bttv.h +++ b/drivers/media/video/bt8xx/bttv.h @@ -234,7 +234,6 @@ struct tvcard { /* i2c audio flags */ unsigned int no_msp34xx:1; - unsigned int no_tda9875:1; unsigned int no_tda7432:1; unsigned int needs_tvaudio:1; unsigned int msp34xx_alt:1; -- cgit v1.2.1 From 9af39713feb53da96ba23fa94a73ffd0de50a815 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 18 Dec 2010 09:20:59 -0300 Subject: [media] saa7146: Convert from .ioctl to .unlocked_ioctl Convert saa7146 to use core-assisted locking. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/saa7146_core.c | 2 +- drivers/media/common/saa7146_fops.c | 8 ++------ drivers/media/common/saa7146_vbi.c | 2 +- drivers/media/common/saa7146_video.c | 20 +------------------- 4 files changed, 5 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c index 982f000a57ff..9f47e383c57a 100644 --- a/drivers/media/common/saa7146_core.c +++ b/drivers/media/common/saa7146_core.c @@ -452,7 +452,7 @@ static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent INFO(("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x).\n", dev->mem, dev->revision, pci->irq, pci->subsystem_vendor, pci->subsystem_device)); dev->ext = ext; - mutex_init(&dev->lock); + mutex_init(&dev->v4l2_lock); spin_lock_init(&dev->int_slock); spin_lock_init(&dev->slock); diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c index e3fedc60fe77..1bd3dd762c6b 100644 --- a/drivers/media/common/saa7146_fops.c +++ b/drivers/media/common/saa7146_fops.c @@ -15,18 +15,15 @@ int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit) } /* is it free? */ - mutex_lock(&dev->lock); if (vv->resources & bit) { DEB_D(("locked! vv->resources:0x%02x, we want:0x%02x\n",vv->resources,bit)); /* no, someone else uses it */ - mutex_unlock(&dev->lock); return 0; } /* it's free, grab it */ fh->resources |= bit; vv->resources |= bit; DEB_D(("res: get 0x%02x, cur:0x%02x\n",bit,vv->resources)); - mutex_unlock(&dev->lock); return 1; } @@ -37,11 +34,9 @@ void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits) BUG_ON((fh->resources & bits) != bits); - mutex_lock(&dev->lock); fh->resources &= ~bits; vv->resources &= ~bits; DEB_D(("res: put 0x%02x, cur:0x%02x\n",bits,vv->resources)); - mutex_unlock(&dev->lock); } @@ -396,7 +391,7 @@ static const struct v4l2_file_operations video_fops = .write = fops_write, .poll = fops_poll, .mmap = fops_mmap, - .ioctl = video_ioctl2, + .unlocked_ioctl = video_ioctl2, }; static void vv_callback(struct saa7146_dev *dev, unsigned long status) @@ -505,6 +500,7 @@ int saa7146_register_device(struct video_device **vid, struct saa7146_dev* dev, vfd->fops = &video_fops; vfd->ioctl_ops = &dev->ext_vv_data->ops; vfd->release = video_device_release; + vfd->lock = &dev->v4l2_lock; vfd->tvnorms = 0; for (i = 0; i < dev->ext_vv_data->num_stds; i++) vfd->tvnorms |= dev->ext_vv_data->stds[i].id; diff --git a/drivers/media/common/saa7146_vbi.c b/drivers/media/common/saa7146_vbi.c index 2d4533ab22b7..afe85801d6ca 100644 --- a/drivers/media/common/saa7146_vbi.c +++ b/drivers/media/common/saa7146_vbi.c @@ -412,7 +412,7 @@ static int vbi_open(struct saa7146_dev *dev, struct file *file) V4L2_BUF_TYPE_VBI_CAPTURE, V4L2_FIELD_SEQ_TB, // FIXME: does this really work? sizeof(struct saa7146_buf), - file, NULL); + file, &dev->v4l2_lock); init_timer(&fh->vbi_read_timeout); fh->vbi_read_timeout.function = vbi_read_timeout; diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index 0ac5c619aecf..9aafa4e969a8 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -553,8 +553,6 @@ static int vidioc_s_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *f } } - mutex_lock(&dev->lock); - /* ok, accept it */ vv->ov_fb = *fb; vv->ov_fmt = fmt; @@ -563,8 +561,6 @@ static int vidioc_s_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *f vv->ov_fb.fmt.bytesperline = vv->ov_fb.fmt.width * fmt->depth / 8; DEB_D(("setting bytesperline to %d\n", vv->ov_fb.fmt.bytesperline)); } - - mutex_unlock(&dev->lock); return 0; } @@ -649,8 +645,6 @@ static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *c) return -EINVAL; } - mutex_lock(&dev->lock); - switch (ctrl->type) { case V4L2_CTRL_TYPE_BOOLEAN: case V4L2_CTRL_TYPE_MENU: @@ -693,7 +687,6 @@ static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *c) /* fixme: we can support changing VFLIP and HFLIP here... */ if (IS_CAPTURE_ACTIVE(fh) != 0) { DEB_D(("V4L2_CID_HFLIP while active capture.\n")); - mutex_unlock(&dev->lock); return -EBUSY; } vv->hflip = c->value; @@ -701,16 +694,13 @@ static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *c) case V4L2_CID_VFLIP: if (IS_CAPTURE_ACTIVE(fh) != 0) { DEB_D(("V4L2_CID_VFLIP while active capture.\n")); - mutex_unlock(&dev->lock); return -EBUSY; } vv->vflip = c->value; break; default: - mutex_unlock(&dev->lock); return -EINVAL; } - mutex_unlock(&dev->lock); if (IS_OVERLAY_ACTIVE(fh) != 0) { saa7146_stop_preview(fh); @@ -902,22 +892,18 @@ static int vidioc_s_fmt_vid_overlay(struct file *file, void *__fh, struct v4l2_f err = vidioc_try_fmt_vid_overlay(file, fh, f); if (0 != err) return err; - mutex_lock(&dev->lock); fh->ov.win = f->fmt.win; fh->ov.nclips = f->fmt.win.clipcount; if (fh->ov.nclips > 16) fh->ov.nclips = 16; if (copy_from_user(fh->ov.clips, f->fmt.win.clips, sizeof(struct v4l2_clip) * fh->ov.nclips)) { - mutex_unlock(&dev->lock); return -EFAULT; } /* fh->ov.fh is used to indicate that we have valid overlay informations, too */ fh->ov.fh = fh; - mutex_unlock(&dev->lock); - /* check if our current overlay is active */ if (IS_OVERLAY_ACTIVE(fh) != 0) { saa7146_stop_preview(fh); @@ -976,8 +962,6 @@ static int vidioc_s_std(struct file *file, void *fh, v4l2_std_id *id) } } - mutex_lock(&dev->lock); - for (i = 0; i < dev->ext_vv_data->num_stds; i++) if (*id & dev->ext_vv_data->stds[i].id) break; @@ -988,8 +972,6 @@ static int vidioc_s_std(struct file *file, void *fh, v4l2_std_id *id) found = 1; } - mutex_unlock(&dev->lock); - if (vv->ov_suspend != NULL) { saa7146_start_preview(vv->ov_suspend); vv->ov_suspend = NULL; @@ -1354,7 +1336,7 @@ static int video_open(struct saa7146_dev *dev, struct file *file) V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_INTERLACED, sizeof(struct saa7146_buf), - file, NULL); + file, &dev->v4l2_lock); return 0; } -- cgit v1.2.1 From d2db8fee0d77f43f64e4e97ccc1558a9f59fab41 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 18 Dec 2010 09:50:43 -0300 Subject: [media] cpia2: convert .ioctl to .unlocked_ioctl Implement core-assisted locking in cpia2. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cpia2/cpia2.h | 2 +- drivers/media/video/cpia2/cpia2_core.c | 65 +++++---------------- drivers/media/video/cpia2/cpia2_v4l.c | 104 +++++++++++---------------------- 3 files changed, 50 insertions(+), 121 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cpia2/cpia2.h b/drivers/media/video/cpia2/cpia2.h index 916c13d5cf7d..6d6d1843791c 100644 --- a/drivers/media/video/cpia2/cpia2.h +++ b/drivers/media/video/cpia2/cpia2.h @@ -378,7 +378,7 @@ struct cpia2_fh { struct camera_data { /* locks */ - struct mutex busy_lock; /* guard against SMP multithreading */ + struct mutex v4l2_lock; /* serialize file operations */ struct v4l2_prio_state prio; /* camera status */ diff --git a/drivers/media/video/cpia2/cpia2_core.c b/drivers/media/video/cpia2/cpia2_core.c index 9606bc01b803..aaffca8e13fd 100644 --- a/drivers/media/video/cpia2/cpia2_core.c +++ b/drivers/media/video/cpia2/cpia2_core.c @@ -2247,7 +2247,7 @@ struct camera_data *cpia2_init_camera_struct(void) cam->present = 1; - mutex_init(&cam->busy_lock); + mutex_init(&cam->v4l2_lock); init_waitqueue_head(&cam->wq_stream); return cam; @@ -2365,9 +2365,9 @@ long cpia2_read(struct camera_data *cam, char __user *buf, unsigned long count, int noblock) { struct framebuf *frame; - if (!count) { + + if (!count) return 0; - } if (!buf) { ERR("%s: buffer NULL\n",__func__); @@ -2379,17 +2379,12 @@ long cpia2_read(struct camera_data *cam, return -EINVAL; } - /* make this _really_ smp and multithread-safe */ - if (mutex_lock_interruptible(&cam->busy_lock)) - return -ERESTARTSYS; - if (!cam->present) { LOG("%s: camera removed\n",__func__); - mutex_unlock(&cam->busy_lock); return 0; /* EOF */ } - if(!cam->streaming) { + if (!cam->streaming) { /* Start streaming */ cpia2_usb_stream_start(cam, cam->params.camera_state.stream_mode); @@ -2398,42 +2393,31 @@ long cpia2_read(struct camera_data *cam, /* Copy cam->curbuff in case it changes while we're processing */ frame = cam->curbuff; if (noblock && frame->status != FRAME_READY) { - mutex_unlock(&cam->busy_lock); return -EAGAIN; } - if(frame->status != FRAME_READY) { - mutex_unlock(&cam->busy_lock); + if (frame->status != FRAME_READY) { + mutex_unlock(&cam->v4l2_lock); wait_event_interruptible(cam->wq_stream, !cam->present || (frame = cam->curbuff)->status == FRAME_READY); + mutex_lock(&cam->v4l2_lock); if (signal_pending(current)) return -ERESTARTSYS; - /* make this _really_ smp and multithread-safe */ - if (mutex_lock_interruptible(&cam->busy_lock)) { - return -ERESTARTSYS; - } - if(!cam->present) { - mutex_unlock(&cam->busy_lock); + if (!cam->present) return 0; - } } /* copy data to user space */ - if (frame->length > count) { - mutex_unlock(&cam->busy_lock); + if (frame->length > count) return -EFAULT; - } - if (copy_to_user(buf, frame->data, frame->length)) { - mutex_unlock(&cam->busy_lock); + if (copy_to_user(buf, frame->data, frame->length)) return -EFAULT; - } count = frame->length; frame->status = FRAME_EMPTY; - mutex_unlock(&cam->busy_lock); return count; } @@ -2447,17 +2431,13 @@ unsigned int cpia2_poll(struct camera_data *cam, struct file *filp, { unsigned int status=0; - if(!cam) { + if (!cam) { ERR("%s: Internal error, camera_data not found!\n",__func__); return POLLERR; } - mutex_lock(&cam->busy_lock); - - if(!cam->present) { - mutex_unlock(&cam->busy_lock); + if (!cam->present) return POLLHUP; - } if(!cam->streaming) { /* Start streaming */ @@ -2465,16 +2445,13 @@ unsigned int cpia2_poll(struct camera_data *cam, struct file *filp, cam->params.camera_state.stream_mode); } - mutex_unlock(&cam->busy_lock); poll_wait(filp, &cam->wq_stream, wait); - mutex_lock(&cam->busy_lock); if(!cam->present) status = POLLHUP; else if(cam->curbuff->status == FRAME_READY) status = POLLIN | POLLRDNORM; - mutex_unlock(&cam->busy_lock); return status; } @@ -2496,29 +2473,19 @@ int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma) DBG("mmap offset:%ld size:%ld\n", start_offset, size); - /* make this _really_ smp-safe */ - if (mutex_lock_interruptible(&cam->busy_lock)) - return -ERESTARTSYS; - - if (!cam->present) { - mutex_unlock(&cam->busy_lock); + if (!cam->present) return -ENODEV; - } if (size > cam->frame_size*cam->num_frames || (start_offset % cam->frame_size) != 0 || - (start_offset+size > cam->frame_size*cam->num_frames)) { - mutex_unlock(&cam->busy_lock); + (start_offset+size > cam->frame_size*cam->num_frames)) return -EINVAL; - } pos = ((unsigned long) (cam->frame_buffer)) + start_offset; while (size > 0) { page = kvirt_to_pa(pos); - if (remap_pfn_range(vma, start, page >> PAGE_SHIFT, PAGE_SIZE, PAGE_SHARED)) { - mutex_unlock(&cam->busy_lock); + if (remap_pfn_range(vma, start, page >> PAGE_SHIFT, PAGE_SIZE, PAGE_SHARED)) return -EAGAIN; - } start += PAGE_SIZE; pos += PAGE_SIZE; if (size > PAGE_SIZE) @@ -2528,7 +2495,5 @@ int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma) } cam->mmapped = true; - mutex_unlock(&cam->busy_lock); return 0; } - diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c index 7edf80b0d01a..9bad39842936 100644 --- a/drivers/media/video/cpia2/cpia2_v4l.c +++ b/drivers/media/video/cpia2/cpia2_v4l.c @@ -238,59 +238,40 @@ static struct v4l2_queryctrl controls[] = { static int cpia2_open(struct file *file) { struct camera_data *cam = video_drvdata(file); - int retval = 0; + struct cpia2_fh *fh; if (!cam) { ERR("Internal error, camera_data not found!\n"); return -ENODEV; } - if(mutex_lock_interruptible(&cam->busy_lock)) - return -ERESTARTSYS; - - if(!cam->present) { - retval = -ENODEV; - goto err_return; - } + if (!cam->present) + return -ENODEV; - if (cam->open_count > 0) { - goto skip_init; - } + if (cam->open_count == 0) { + if (cpia2_allocate_buffers(cam)) + return -ENOMEM; - if (cpia2_allocate_buffers(cam)) { - retval = -ENOMEM; - goto err_return; - } + /* reset the camera */ + if (cpia2_reset_camera(cam) < 0) + return -EIO; - /* reset the camera */ - if (cpia2_reset_camera(cam) < 0) { - retval = -EIO; - goto err_return; + cam->APP_len = 0; + cam->COM_len = 0; } - cam->APP_len = 0; - cam->COM_len = 0; - -skip_init: - { - struct cpia2_fh *fh = kmalloc(sizeof(*fh),GFP_KERNEL); - if(!fh) { - retval = -ENOMEM; - goto err_return; - } - file->private_data = fh; - fh->prio = V4L2_PRIORITY_UNSET; - v4l2_prio_open(&cam->prio, &fh->prio); - fh->mmapped = 0; - } + fh = kmalloc(sizeof(*fh), GFP_KERNEL); + if (!fh) + return -ENOMEM; + file->private_data = fh; + fh->prio = V4L2_PRIORITY_UNSET; + v4l2_prio_open(&cam->prio, &fh->prio); + fh->mmapped = 0; ++cam->open_count; cpia2_dbg_dump_registers(cam); - -err_return: - mutex_unlock(&cam->busy_lock); - return retval; + return 0; } /****************************************************************************** @@ -304,15 +285,11 @@ static int cpia2_close(struct file *file) struct camera_data *cam = video_get_drvdata(dev); struct cpia2_fh *fh = file->private_data; - mutex_lock(&cam->busy_lock); - if (cam->present && - (cam->open_count == 1 - || fh->prio == V4L2_PRIORITY_RECORD - )) { + (cam->open_count == 1 || fh->prio == V4L2_PRIORITY_RECORD)) { cpia2_usb_stream_stop(cam); - if(cam->open_count == 1) { + if (cam->open_count == 1) { /* save camera state for later open */ cpia2_save_camera_state(cam); @@ -321,26 +298,21 @@ static int cpia2_close(struct file *file) } } - { - if(fh->mmapped) - cam->mmapped = 0; - v4l2_prio_close(&cam->prio, fh->prio); - file->private_data = NULL; - kfree(fh); - } + if (fh->mmapped) + cam->mmapped = 0; + v4l2_prio_close(&cam->prio, fh->prio); + file->private_data = NULL; + kfree(fh); if (--cam->open_count == 0) { cpia2_free_buffers(cam); if (!cam->present) { video_unregister_device(dev); - mutex_unlock(&cam->busy_lock); kfree(cam); return 0; } } - mutex_unlock(&cam->busy_lock); - return 0; } @@ -405,11 +377,11 @@ static int sync(struct camera_data *cam, int frame_nr) return 0; } - mutex_unlock(&cam->busy_lock); + mutex_unlock(&cam->v4l2_lock); wait_event_interruptible(cam->wq_stream, !cam->streaming || frame->status == FRAME_READY); - mutex_lock(&cam->busy_lock); + mutex_lock(&cam->v4l2_lock); if (signal_pending(current)) return -ERESTARTSYS; if(!cam->present) @@ -1293,11 +1265,11 @@ static int ioctl_dqbuf(void *arg,struct camera_data *cam, struct file *file) if(frame < 0) { /* Wait for a frame to become available */ struct framebuf *cb=cam->curbuff; - mutex_unlock(&cam->busy_lock); + mutex_unlock(&cam->v4l2_lock); wait_event_interruptible(cam->wq_stream, !cam->present || (cb=cam->curbuff)->status == FRAME_READY); - mutex_lock(&cam->busy_lock); + mutex_lock(&cam->v4l2_lock); if (signal_pending(current)) return -ERESTARTSYS; if(!cam->present) @@ -1337,14 +1309,8 @@ static long cpia2_do_ioctl(struct file *file, unsigned int cmd, void *arg) if (!cam) return -ENOTTY; - /* make this _really_ smp-safe */ - if (mutex_lock_interruptible(&cam->busy_lock)) - return -ERESTARTSYS; - - if (!cam->present) { - mutex_unlock(&cam->busy_lock); + if (!cam->present) return -ENODEV; - } /* Priority check */ switch (cmd) { @@ -1352,10 +1318,8 @@ static long cpia2_do_ioctl(struct file *file, unsigned int cmd, void *arg) { struct cpia2_fh *fh = file->private_data; retval = v4l2_prio_check(&cam->prio, fh->prio); - if(retval) { - mutex_unlock(&cam->busy_lock); + if (retval) return retval; - } break; } default: @@ -1529,7 +1493,6 @@ static long cpia2_do_ioctl(struct file *file, unsigned int cmd, void *arg) break; } - mutex_unlock(&cam->busy_lock); return retval; } @@ -1596,7 +1559,7 @@ static const struct v4l2_file_operations cpia2_fops = { .release = cpia2_close, .read = cpia2_v4l_read, .poll = cpia2_v4l_poll, - .ioctl = cpia2_ioctl, + .unlocked_ioctl = cpia2_ioctl, .mmap = cpia2_mmap, }; @@ -1620,6 +1583,7 @@ int cpia2_register_camera(struct camera_data *cam) memcpy(cam->vdev, &cpia2_template, sizeof(cpia2_template)); video_set_drvdata(cam->vdev, cam); + cam->vdev->lock = &cam->v4l2_lock; reset_camera_struct_v4l(cam); -- cgit v1.2.1 From 7036d6a73c88428764e4a12f30846279346f4382 Mon Sep 17 00:00:00 2001 From: Mats Randgaard Date: Thu, 16 Dec 2010 12:17:41 -0300 Subject: [media] vpif_cap/disp: Add debug functionality The following functions are added to the drivers: - vpif_g_chip_ident - vpif_dbg_g_register - vpif_dbg_s_register - vpif_log_status Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Acked-by: Vaibhav Hiremath Acked-by: Manjunath Hadli Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpif_capture.c | 83 ++++++++++++++++++++++++++++ drivers/media/video/davinci/vpif_display.c | 86 ++++++++++++++++++++++++++++++ 2 files changed, 169 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c index 193abab6b355..9446dbc476fd 100644 --- a/drivers/media/video/davinci/vpif_capture.c +++ b/drivers/media/video/davinci/vpif_capture.c @@ -37,6 +37,7 @@ #include #include #include +#include #include "vpif_capture.h" #include "vpif.h" @@ -1807,6 +1808,82 @@ static int vpif_cropcap(struct file *file, void *priv, return 0; } +/* + * vpif_g_chip_ident() - Identify the chip + * @file: file ptr + * @priv: file handle + * @chip: chip identity + * + * Returns zero or -EINVAL if read operations fails. + */ +static int vpif_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER && + chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) { + vpif_dbg(2, debug, "match_type is invalid.\n"); + return -EINVAL; + } + + return v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 0, core, + g_chip_ident, chip); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +/* + * vpif_dbg_g_register() - Read register + * @file: file ptr + * @priv: file handle + * @reg: register to be read + * + * Debugging only + * Returns zero or -EINVAL if read operations fails. + */ +static int vpif_dbg_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg){ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], core, + g_register, reg); +} + +/* + * vpif_dbg_s_register() - Write to register + * @file: file ptr + * @priv: file handle + * @reg: register to be modified + * + * Debugging only + * Returns zero or -EINVAL if write operations fails. + */ +static int vpif_dbg_s_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg){ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], core, + s_register, reg); +} +#endif + +/* + * vpif_log_status() - Status information + * @file: file ptr + * @priv: file handle + * + * Returns zero. + */ +static int vpif_log_status(struct file *filep, void *priv) +{ + /* status for sub devices */ + v4l2_device_call_all(&vpif_obj.v4l2_dev, 0, core, log_status); + + return 0; +} + /* vpif capture ioctl operations */ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_querycap = vpif_querycap, @@ -1829,6 +1906,12 @@ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_streamon = vpif_streamon, .vidioc_streamoff = vpif_streamoff, .vidioc_cropcap = vpif_cropcap, + .vidioc_g_chip_ident = vpif_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vpif_dbg_g_register, + .vidioc_s_register = vpif_dbg_s_register, +#endif + .vidioc_log_status = vpif_log_status, }; /* vpif file operations */ diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index 412c65d54fe1..2d55e3e86a84 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -38,6 +38,7 @@ #include #include #include +#include #include @@ -1315,6 +1316,85 @@ static int vpif_s_priority(struct file *file, void *priv, enum v4l2_priority p) return v4l2_prio_change(&ch->prio, &fh->prio, p); } + +/* + * vpif_g_chip_ident() - Identify the chip + * @file: file ptr + * @priv: file handle + * @chip: chip identity + * + * Returns zero or -EINVAL if read operations fails. + */ +static int vpif_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER && + chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) { + vpif_dbg(2, debug, "match_type is invalid.\n"); + return -EINVAL; + } + + return v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 0, core, + g_chip_ident, chip); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +/* + * vpif_dbg_g_register() - Read register + * @file: file ptr + * @priv: file handle + * @reg: register to be read + * + * Debugging only + * Returns zero or -EINVAL if read operations fails. + */ +static int vpif_dbg_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg){ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + + return v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], core, + g_register, reg); +} + +/* + * vpif_dbg_s_register() - Write to register + * @file: file ptr + * @priv: file handle + * @reg: register to be modified + * + * Debugging only + * Returns zero or -EINVAL if write operations fails. + */ +static int vpif_dbg_s_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg){ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + + return v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], core, + s_register, reg); +} +#endif + +/* + * vpif_log_status() - Status information + * @file: file ptr + * @priv: file handle + * + * Returns zero. + */ +static int vpif_log_status(struct file *filep, void *priv) +{ + /* status for sub devices */ + v4l2_device_call_all(&vpif_obj.v4l2_dev, 0, core, log_status); + + return 0; +} + /* vpif display ioctl operations */ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_querycap = vpif_querycap, @@ -1336,6 +1416,12 @@ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_s_output = vpif_s_output, .vidioc_g_output = vpif_g_output, .vidioc_cropcap = vpif_cropcap, + .vidioc_g_chip_ident = vpif_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vpif_dbg_g_register, + .vidioc_s_register = vpif_dbg_s_register, +#endif + .vidioc_log_status = vpif_log_status, }; static const struct v4l2_file_operations vpif_fops = { -- cgit v1.2.1 From aa4444063505983c5971bc8fb832385dfba16b41 Mon Sep 17 00:00:00 2001 From: Mats Randgaard Date: Thu, 16 Dec 2010 12:17:42 -0300 Subject: [media] vpif: Consolidate formats from capture and display - The ch_params tables in vpif_capture.c and vpif_display.c are moved to a common table in vpif.c. Then it is easier to maintain the table. - The field "fps" is removed from the struct vpif_channel_config_params because it is not used. Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Acked-by : Murali Karicheri Acked-by: Manjunath Hadli Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpif.c | 50 ++++++++++++++++++++++++++++++ drivers/media/video/davinci/vpif.h | 4 ++- drivers/media/video/davinci/vpif_capture.c | 18 ++--------- drivers/media/video/davinci/vpif_display.c | 17 ++-------- 4 files changed, 58 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/davinci/vpif.c b/drivers/media/video/davinci/vpif.c index 1f532e31cd49..54cc0dadd755 100644 --- a/drivers/media/video/davinci/vpif.c +++ b/drivers/media/video/davinci/vpif.c @@ -41,6 +41,56 @@ spinlock_t vpif_lock; void __iomem *vpif_base; +/** + * ch_params: video standard configuration parameters for vpif + * The table must include all presets from supported subdevices. + */ +const struct vpif_channel_config_params ch_params[] = { + /* SDTV formats */ + { + .name = "NTSC_M", + .width = 720, + .height = 480, + .frm_fmt = 0, + .ycmux_mode = 1, + .eav2sav = 268, + .sav2eav = 1440, + .l1 = 1, + .l3 = 23, + .l5 = 263, + .l7 = 266, + .l9 = 286, + .l11 = 525, + .vsize = 525, + .capture_format = 0, + .vbi_supported = 1, + .hd_sd = 0, + .stdid = V4L2_STD_525_60, + }, + { + .name = "PAL_BDGHIK", + .width = 720, + .height = 576, + .frm_fmt = 0, + .ycmux_mode = 1, + .eav2sav = 280, + .sav2eav = 1440, + .l1 = 1, + .l3 = 23, + .l5 = 311, + .l7 = 313, + .l9 = 336, + .l11 = 624, + .vsize = 625, + .capture_format = 0, + .vbi_supported = 1, + .hd_sd = 0, + .stdid = V4L2_STD_625_50, + }, +}; + +const unsigned int vpif_ch_params_count = ARRAY_SIZE(ch_params); + static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val) { if (val) diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h index ebd5c4338ebb..d14e36e5c90d 100644 --- a/drivers/media/video/davinci/vpif.h +++ b/drivers/media/video/davinci/vpif.h @@ -577,7 +577,6 @@ struct vpif_channel_config_params { char name[VPIF_MAX_NAME]; /* Name of the mode */ u16 width; /* Indicates width of the image */ u16 height; /* Indicates height of the image */ - u8 fps; u8 frm_fmt; /* Indicates whether this is interlaced * or progressive format */ u8 ycmux_mode; /* Indicates whether this mode requires @@ -594,6 +593,9 @@ struct vpif_channel_config_params { v4l2_std_id stdid; }; +extern const unsigned int vpif_ch_params_count; +extern const struct vpif_channel_config_params ch_params[]; + struct vpif_video_params; struct vpif_params; struct vpif_vbi_params; diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c index 9446dbc476fd..0a7ebb0e151a 100644 --- a/drivers/media/video/davinci/vpif_capture.c +++ b/drivers/media/video/davinci/vpif_capture.c @@ -81,20 +81,6 @@ static struct vpif_config_params config_params = { static struct vpif_device vpif_obj = { {NULL} }; static struct device *vpif_dev; -/** - * ch_params: video standard configuration parameters for vpif - */ -static const struct vpif_channel_config_params ch_params[] = { - { - "NTSC_M", 720, 480, 30, 0, 1, 268, 1440, 1, 23, 263, 266, - 286, 525, 525, 0, 1, 0, V4L2_STD_525_60, - }, - { - "PAL_BDGHIK", 720, 576, 25, 0, 1, 280, 1440, 1, 23, 311, 313, - 336, 624, 625, 0, 1, 0, V4L2_STD_625_50, - }, -}; - /** * vpif_uservirt_to_phys : translate user/virtual address to phy address * @virtp: user/virtual address @@ -444,7 +430,7 @@ static int vpif_update_std_info(struct channel_obj *ch) std_info = &vpifparams->std_info; - for (index = 0; index < ARRAY_SIZE(ch_params); index++) { + for (index = 0; index < vpif_ch_params_count; index++) { config = &ch_params[index]; if (config->stdid & vid_ch->stdid) { memcpy(std_info, config, sizeof(*config)); @@ -453,7 +439,7 @@ static int vpif_update_std_info(struct channel_obj *ch) } /* standard not found */ - if (index == ARRAY_SIZE(ch_params)) + if (index == vpif_ch_params_count) return -EINVAL; common->fmt.fmt.pix.width = std_info->width; diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index 2d55e3e86a84..9de0062eca59 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -85,17 +85,6 @@ static struct vpif_config_params config_params = { static struct vpif_device vpif_obj = { {NULL} }; static struct device *vpif_dev; -static const struct vpif_channel_config_params ch_params[] = { - { - "NTSC", 720, 480, 30, 0, 1, 268, 1440, 1, 23, 263, 266, - 286, 525, 525, 0, 1, 0, V4L2_STD_525_60, - }, - { - "PAL", 720, 576, 25, 0, 1, 280, 1440, 1, 23, 311, 313, - 336, 624, 625, 0, 1, 0, V4L2_STD_625_50, - }, -}; - /* * vpif_uservirt_to_phys: This function is used to convert user * space virtual address to physical address. @@ -388,7 +377,7 @@ static int vpif_get_std_info(struct channel_obj *ch) if (!std_info->stdid) return -1; - for (index = 0; index < ARRAY_SIZE(ch_params); index++) { + for (index = 0; index < vpif_ch_params_count; index++) { config = &ch_params[index]; if (config->stdid & std_info->stdid) { memcpy(std_info, config, sizeof(*config)); @@ -396,8 +385,8 @@ static int vpif_get_std_info(struct channel_obj *ch) } } - if (index == ARRAY_SIZE(ch_params)) - return -1; + if (index == vpif_ch_params_count) + return -EINVAL; common->fmt.fmt.pix.width = std_info->width; common->fmt.fmt.pix.height = std_info->height; -- cgit v1.2.1 From 40c8bcea6bc594c50abf3d3867bd49c8c039eb21 Mon Sep 17 00:00:00 2001 From: Mats Randgaard Date: Thu, 16 Dec 2010 12:17:43 -0300 Subject: [media] vpif_cap/disp: Add support for DV presets - Added functions to set/get/query/enum DV presets for vpif_caputre and vpif_display. - The format specification table is extended with all the DV formats supported by TVP7002. Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Acked-by: Manjunath Hadli Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpif.c | 127 +++++++++++++++++++++++++++++ drivers/media/video/davinci/vpif.h | 1 + drivers/media/video/davinci/vpif_capture.c | 124 +++++++++++++++++++++++++++- drivers/media/video/davinci/vpif_capture.h | 1 + drivers/media/video/davinci/vpif_display.c | 105 ++++++++++++++++++++++-- drivers/media/video/davinci/vpif_display.h | 1 + 6 files changed, 350 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/davinci/vpif.c b/drivers/media/video/davinci/vpif.c index 54cc0dadd755..9f3bfc1eb240 100644 --- a/drivers/media/video/davinci/vpif.c +++ b/drivers/media/video/davinci/vpif.c @@ -46,6 +46,133 @@ void __iomem *vpif_base; * The table must include all presets from supported subdevices. */ const struct vpif_channel_config_params ch_params[] = { + /* HDTV formats */ + { + .name = "480p59_94", + .width = 720, + .height = 480, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 138-8, + .sav2eav = 720, + .l1 = 1, + .l3 = 43, + .l5 = 523, + .vsize = 525, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_480P59_94, + }, + { + .name = "576p50", + .width = 720, + .height = 576, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 144-8, + .sav2eav = 720, + .l1 = 1, + .l3 = 45, + .l5 = 621, + .vsize = 625, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_576P50, + }, + { + .name = "720p50", + .width = 1280, + .height = 720, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 700-8, + .sav2eav = 1280, + .l1 = 1, + .l3 = 26, + .l5 = 746, + .vsize = 750, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_720P50, + }, + { + .name = "720p60", + .width = 1280, + .height = 720, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 370 - 8, + .sav2eav = 1280, + .l1 = 1, + .l3 = 26, + .l5 = 746, + .vsize = 750, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_720P60, + }, + { + .name = "1080I50", + .width = 1920, + .height = 1080, + .frm_fmt = 0, + .ycmux_mode = 0, + .eav2sav = 720 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 21, + .l5 = 561, + .l7 = 563, + .l9 = 584, + .l11 = 1124, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_1080I50, + }, + { + .name = "1080I60", + .width = 1920, + .height = 1080, + .frm_fmt = 0, + .ycmux_mode = 0, + .eav2sav = 280 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 21, + .l5 = 561, + .l7 = 563, + .l9 = 584, + .l11 = 1124, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_1080I60, + }, + { + .name = "1080p60", + .width = 1920, + .height = 1080, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 280 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 42, + .l5 = 1122, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_1080P60, + }, + /* SDTV formats */ { .name = "NTSC_M", diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h index d14e36e5c90d..b6695bee3c59 100644 --- a/drivers/media/video/davinci/vpif.h +++ b/drivers/media/video/davinci/vpif.h @@ -591,6 +591,7 @@ struct vpif_channel_config_params { * supports capturing vbi or not */ u8 hd_sd; v4l2_std_id stdid; + u32 dv_preset; /* HDTV format */ }; extern const unsigned int vpif_ch_params_count; diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c index 0a7ebb0e151a..42f1cd60780b 100644 --- a/drivers/media/video/davinci/vpif_capture.c +++ b/drivers/media/video/davinci/vpif_capture.c @@ -432,9 +432,18 @@ static int vpif_update_std_info(struct channel_obj *ch) for (index = 0; index < vpif_ch_params_count; index++) { config = &ch_params[index]; - if (config->stdid & vid_ch->stdid) { - memcpy(std_info, config, sizeof(*config)); - break; + if (config->hd_sd == 0) { + vpif_dbg(2, debug, "SD format\n"); + if (config->stdid & vid_ch->stdid) { + memcpy(std_info, config, sizeof(*config)); + break; + } + } else { + vpif_dbg(2, debug, "HD format\n"); + if (config->dv_preset == vid_ch->dv_preset) { + memcpy(std_info, config, sizeof(*config)); + break; + } } } @@ -1442,6 +1451,7 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) return -ERESTARTSYS; ch->video.stdid = *std_id; + ch->video.dv_preset = V4L2_DV_INVALID; /* Get the information about the standard */ if (vpif_update_std_info(ch)) { @@ -1794,6 +1804,110 @@ static int vpif_cropcap(struct file *file, void *priv, return 0; } +/** + * vpif_enum_dv_presets() - ENUM_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_enum_dv_presets(struct file *file, void *priv, + struct v4l2_dv_enum_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], + video, enum_dv_presets, preset); +} + +/** + * vpif_query_dv_presets() - QUERY_DV_PRESET handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_query_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], + video, query_dv_preset, preset); +} +/** + * vpif_s_dv_presets() - S_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_s_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; + + if (common->started) { + vpif_dbg(1, debug, "streaming in progress\n"); + return -EBUSY; + } + + if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) || + (VPIF_CHANNEL1_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_dbg(1, debug, "Channel Busy\n"); + return -EBUSY; + } + } + + ret = v4l2_prio_check(&ch->prio, fh->prio); + if (ret) + return ret; + + fh->initialized = 1; + + /* Call encoder subdevice function to set the standard */ + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + + ch->video.dv_preset = preset->preset; + ch->video.stdid = V4L2_STD_UNKNOWN; + + /* Get the information about the standard */ + if (vpif_update_std_info(ch)) { + vpif_dbg(1, debug, "Error getting the standard info\n"); + ret = -EINVAL; + } else { + /* Configure the default format information */ + vpif_config_format(ch); + + ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], + video, s_dv_preset, preset); + } + + mutex_unlock(&common->lock); + + return ret; +} +/** + * vpif_g_dv_presets() - G_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_g_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + preset->preset = ch->video.dv_preset; + + return 0; +} + /* * vpif_g_chip_ident() - Identify the chip * @file: file ptr @@ -1892,6 +2006,10 @@ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_streamon = vpif_streamon, .vidioc_streamoff = vpif_streamoff, .vidioc_cropcap = vpif_cropcap, + .vidioc_enum_dv_presets = vpif_enum_dv_presets, + .vidioc_s_dv_preset = vpif_s_dv_preset, + .vidioc_g_dv_preset = vpif_g_dv_preset, + .vidioc_query_dv_preset = vpif_query_dv_preset, .vidioc_g_chip_ident = vpif_g_chip_ident, #ifdef CONFIG_VIDEO_ADV_DEBUG .vidioc_g_register = vpif_dbg_g_register, diff --git a/drivers/media/video/davinci/vpif_capture.h b/drivers/media/video/davinci/vpif_capture.h index 4e12ec8cac6f..3452a8aec020 100644 --- a/drivers/media/video/davinci/vpif_capture.h +++ b/drivers/media/video/davinci/vpif_capture.h @@ -59,6 +59,7 @@ struct video_obj { enum v4l2_field buf_field; /* Currently selected or default standard */ v4l2_std_id stdid; + u32 dv_preset; /* This is to track the last input that is passed to application */ u32 input_idx; }; diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index 9de0062eca59..759c5e855ac8 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -373,15 +373,23 @@ static int vpif_get_std_info(struct channel_obj *ch) int index; - std_info->stdid = vid_ch->stdid; - if (!std_info->stdid) - return -1; + if (!vid_ch->stdid && !vid_ch->dv_preset) + return -EINVAL; for (index = 0; index < vpif_ch_params_count; index++) { config = &ch_params[index]; - if (config->stdid & std_info->stdid) { - memcpy(std_info, config, sizeof(*config)); - break; + if (config->hd_sd == 0) { + vpif_dbg(2, debug, "SD format\n"); + if (config->stdid & vid_ch->stdid) { + memcpy(std_info, config, sizeof(*config)); + break; + } + } else { + vpif_dbg(2, debug, "HD format\n"); + if (config->dv_preset == vid_ch->dv_preset) { + memcpy(std_info, config, sizeof(*config)); + break; + } } } @@ -1305,6 +1313,88 @@ static int vpif_s_priority(struct file *file, void *priv, enum v4l2_priority p) return v4l2_prio_change(&ch->prio, &fh->prio, p); } +/** + * vpif_enum_dv_presets() - ENUM_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_enum_dv_presets(struct file *file, void *priv, + struct v4l2_dv_enum_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + + return v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], + video, enum_dv_presets, preset); +} + +/** + * vpif_s_dv_presets() - S_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_s_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct video_obj *vid_ch = &ch->video; + int ret = 0; + + if (common->started) { + vpif_dbg(1, debug, "streaming in progress\n"); + return -EBUSY; + } + + ret = v4l2_prio_check(&ch->prio, fh->prio); + if (ret != 0) + return ret; + + fh->initialized = 1; + + /* Call encoder subdevice function to set the standard */ + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + + ch->video.dv_preset = preset->preset; + ch->video.stdid = V4L2_STD_UNKNOWN; + + /* Get the information about the standard */ + if (vpif_get_std_info(ch)) { + ret = -EINVAL; + vpif_dbg(1, debug, "Error getting the standard info\n"); + } else { + /* Configure the default format information */ + vpif_config_format(ch); + + ret = v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], + video, s_dv_preset, preset); + } + + mutex_unlock(&common->lock); + + return ret; +} +/** + * vpif_g_dv_presets() - G_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_g_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + preset->preset = ch->video.dv_preset; + + return 0; +} /* * vpif_g_chip_ident() - Identify the chip @@ -1405,6 +1495,9 @@ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_s_output = vpif_s_output, .vidioc_g_output = vpif_g_output, .vidioc_cropcap = vpif_cropcap, + .vidioc_enum_dv_presets = vpif_enum_dv_presets, + .vidioc_s_dv_preset = vpif_s_dv_preset, + .vidioc_g_dv_preset = vpif_g_dv_preset, .vidioc_g_chip_ident = vpif_g_chip_ident, #ifdef CONFIG_VIDEO_ADV_DEBUG .vidioc_g_register = vpif_dbg_g_register, diff --git a/drivers/media/video/davinci/vpif_display.h b/drivers/media/video/davinci/vpif_display.h index a2a7cd166bbf..3d56b3e356a2 100644 --- a/drivers/media/video/davinci/vpif_display.h +++ b/drivers/media/video/davinci/vpif_display.h @@ -67,6 +67,7 @@ struct video_obj { * most recent displayed frame only */ v4l2_std_id stdid; /* Currently selected or default * standard */ + u32 dv_preset; u32 output_id; /* Current output id */ }; -- cgit v1.2.1 From c027e165d2d901ecab485da5fee72ddce5da0297 Mon Sep 17 00:00:00 2001 From: Mats Randgaard Date: Thu, 16 Dec 2010 12:17:44 -0300 Subject: [media] vpif_cap/disp: Added support for DV timings Added functions to set and get custom DV timings. Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Acked-by: Vaibhav Hiremath Acked-by: Manjunath Hadli Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpif_capture.c | 123 +++++++++++++++++++ drivers/media/video/davinci/vpif_capture.h | 1 + drivers/media/video/davinci/vpif_display.c | 190 +++++++++++++++++++++++++---- drivers/media/video/davinci/vpif_display.h | 1 + 4 files changed, 290 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c index 42f1cd60780b..be2b9919937c 100644 --- a/drivers/media/video/davinci/vpif_capture.c +++ b/drivers/media/video/davinci/vpif_capture.c @@ -1452,6 +1452,7 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) ch->video.stdid = *std_id; ch->video.dv_preset = V4L2_DV_INVALID; + memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); /* Get the information about the standard */ if (vpif_update_std_info(ch)) { @@ -1874,6 +1875,7 @@ static int vpif_s_dv_preset(struct file *file, void *priv, ch->video.dv_preset = preset->preset; ch->video.stdid = V4L2_STD_UNKNOWN; + memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); /* Get the information about the standard */ if (vpif_update_std_info(ch)) { @@ -1908,6 +1910,125 @@ static int vpif_g_dv_preset(struct file *file, void *priv, return 0; } +/** + * vpif_s_dv_timings() - S_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: digital video timings + */ +static int vpif_s_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct vpif_params *vpifparams = &ch->vpifparams; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + struct video_obj *vid_ch = &ch->video; + struct v4l2_bt_timings *bt = &vid_ch->bt_timings; + int ret; + + if (timings->type != V4L2_DV_BT_656_1120) { + vpif_dbg(2, debug, "Timing type not defined\n"); + return -EINVAL; + } + + /* Configure subdevice timings, if any */ + ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], + video, s_dv_timings, timings); + if (ret == -ENOIOCTLCMD) { + vpif_dbg(2, debug, "Custom DV timings not supported by " + "subdevice\n"); + return -EINVAL; + } + if (ret < 0) { + vpif_dbg(2, debug, "Error setting custom DV timings\n"); + return ret; + } + + if (!(timings->bt.width && timings->bt.height && + (timings->bt.hbackporch || + timings->bt.hfrontporch || + timings->bt.hsync) && + timings->bt.vfrontporch && + (timings->bt.vbackporch || + timings->bt.vsync))) { + vpif_dbg(2, debug, "Timings for width, height, " + "horizontal back porch, horizontal sync, " + "horizontal front porch, vertical back porch, " + "vertical sync and vertical back porch " + "must be defined\n"); + return -EINVAL; + } + + *bt = timings->bt; + + /* Configure video port timings */ + + std_info->eav2sav = bt->hbackporch + bt->hfrontporch + + bt->hsync - 8; + std_info->sav2eav = bt->width; + + std_info->l1 = 1; + std_info->l3 = bt->vsync + bt->vbackporch + 1; + + if (bt->interlaced) { + if (bt->il_vbackporch || bt->il_vfrontporch || bt->il_vsync) { + std_info->vsize = bt->height * 2 + + bt->vfrontporch + bt->vsync + bt->vbackporch + + bt->il_vfrontporch + bt->il_vsync + + bt->il_vbackporch; + std_info->l5 = std_info->vsize/2 - + (bt->vfrontporch - 1); + std_info->l7 = std_info->vsize/2 + 1; + std_info->l9 = std_info->l7 + bt->il_vsync + + bt->il_vbackporch + 1; + std_info->l11 = std_info->vsize - + (bt->il_vfrontporch - 1); + } else { + vpif_dbg(2, debug, "Required timing values for " + "interlaced BT format missing\n"); + return -EINVAL; + } + } else { + std_info->vsize = bt->height + bt->vfrontporch + + bt->vsync + bt->vbackporch; + std_info->l5 = std_info->vsize - (bt->vfrontporch - 1); + } + strncpy(std_info->name, "Custom timings BT656/1120", VPIF_MAX_NAME); + std_info->width = bt->width; + std_info->height = bt->height; + std_info->frm_fmt = bt->interlaced ? 0 : 1; + std_info->ycmux_mode = 0; + std_info->capture_format = 0; + std_info->vbi_supported = 0; + std_info->hd_sd = 1; + std_info->stdid = 0; + std_info->dv_preset = V4L2_DV_INVALID; + + vid_ch->stdid = 0; + vid_ch->dv_preset = V4L2_DV_INVALID; + return 0; +} + +/** + * vpif_g_dv_timings() - G_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: digital video timings + */ +static int vpif_g_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + struct v4l2_bt_timings *bt = &vid_ch->bt_timings; + + timings->bt = *bt; + + return 0; +} + /* * vpif_g_chip_ident() - Identify the chip * @file: file ptr @@ -2010,6 +2131,8 @@ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_s_dv_preset = vpif_s_dv_preset, .vidioc_g_dv_preset = vpif_g_dv_preset, .vidioc_query_dv_preset = vpif_query_dv_preset, + .vidioc_s_dv_timings = vpif_s_dv_timings, + .vidioc_g_dv_timings = vpif_g_dv_timings, .vidioc_g_chip_ident = vpif_g_chip_ident, #ifdef CONFIG_VIDEO_ADV_DEBUG .vidioc_g_register = vpif_dbg_g_register, diff --git a/drivers/media/video/davinci/vpif_capture.h b/drivers/media/video/davinci/vpif_capture.h index 3452a8aec020..7a4196dfdce1 100644 --- a/drivers/media/video/davinci/vpif_capture.h +++ b/drivers/media/video/davinci/vpif_capture.h @@ -60,6 +60,7 @@ struct video_obj { /* Currently selected or default standard */ v4l2_std_id stdid; u32 dv_preset; + struct v4l2_bt_timings bt_timings; /* This is to track the last input that is passed to application */ u32 input_idx; }; diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index 759c5e855ac8..44a885878ebf 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -363,21 +363,17 @@ static irqreturn_t vpif_channel_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int vpif_get_std_info(struct channel_obj *ch) +static int vpif_update_std_info(struct channel_obj *ch) { - struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; struct video_obj *vid_ch = &ch->video; struct vpif_params *vpifparams = &ch->vpifparams; struct vpif_channel_config_params *std_info = &vpifparams->std_info; const struct vpif_channel_config_params *config; - int index; - - if (!vid_ch->stdid && !vid_ch->dv_preset) - return -EINVAL; + int i; - for (index = 0; index < vpif_ch_params_count; index++) { - config = &ch_params[index]; + for (i = 0; i < vpif_ch_params_count; i++) { + config = &ch_params[i]; if (config->hd_sd == 0) { vpif_dbg(2, debug, "SD format\n"); if (config->stdid & vid_ch->stdid) { @@ -393,17 +389,37 @@ static int vpif_get_std_info(struct channel_obj *ch) } } - if (index == vpif_ch_params_count) + if (i == vpif_ch_params_count) { + vpif_dbg(1, debug, "Format not found\n"); + return -EINVAL; + } + + return 0; +} + +static int vpif_update_resolution(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct video_obj *vid_ch = &ch->video; + struct vpif_params *vpifparams = &ch->vpifparams; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + + if (!vid_ch->stdid && !vid_ch->dv_preset && !vid_ch->bt_timings.height) return -EINVAL; + if (vid_ch->stdid || vid_ch->dv_preset) { + if (vpif_update_std_info(ch)) + return -EINVAL; + } + common->fmt.fmt.pix.width = std_info->width; common->fmt.fmt.pix.height = std_info->height; vpif_dbg(1, debug, "Pixel details: Width = %d,Height = %d\n", common->fmt.fmt.pix.width, common->fmt.fmt.pix.height); /* Set height and width paramateres */ - ch->common[VPIF_VIDEO_INDEX].height = std_info->height; - ch->common[VPIF_VIDEO_INDEX].width = std_info->width; + common->height = std_info->height; + common->width = std_info->width; return 0; } @@ -514,10 +530,8 @@ static int vpif_check_format(struct channel_obj *ch, else sizeimage = config_params.channel_bufsize[ch->channel_id]; - if (vpif_get_std_info(ch)) { - vpif_err("Error getting the standard info\n"); + if (vpif_update_resolution(ch)) return -EINVAL; - } hpitch = pixfmt->bytesperline; vpitch = sizeimage / (hpitch * 2); @@ -715,6 +729,7 @@ static int vpif_g_fmt_vid_out(struct file *file, void *priv, struct vpif_fh *fh = priv; struct channel_obj *ch = fh->channel; struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; /* Check the validity of the buffer type */ if (common->fmt.type != fmt->type) @@ -724,14 +739,14 @@ static int vpif_g_fmt_vid_out(struct file *file, void *priv, if (mutex_lock_interruptible(&common->lock)) return -ERESTARTSYS; - if (vpif_get_std_info(ch)) { - vpif_err("Error getting the standard info\n"); - return -EINVAL; - } + if (vpif_update_resolution(ch)) + ret = -EINVAL; + else + *fmt = common->fmt; - *fmt = common->fmt; mutex_unlock(&common->lock); - return 0; + + return ret; } static int vpif_s_fmt_vid_out(struct file *file, void *priv, @@ -992,10 +1007,13 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) return -ERESTARTSYS; ch->video.stdid = *std_id; + ch->video.dv_preset = V4L2_DV_INVALID; + memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); + /* Get the information about the standard */ - if (vpif_get_std_info(ch)) { - vpif_err("Error getting the standard info\n"); - return -EINVAL; + if (vpif_update_resolution(ch)) { + ret = -EINVAL; + goto s_std_exit; } if ((ch->vpifparams.std_info.width * @@ -1362,11 +1380,11 @@ static int vpif_s_dv_preset(struct file *file, void *priv, ch->video.dv_preset = preset->preset; ch->video.stdid = V4L2_STD_UNKNOWN; + memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); /* Get the information about the standard */ - if (vpif_get_std_info(ch)) { + if (vpif_update_resolution(ch)) { ret = -EINVAL; - vpif_dbg(1, debug, "Error getting the standard info\n"); } else { /* Configure the default format information */ vpif_config_format(ch); @@ -1395,6 +1413,126 @@ static int vpif_g_dv_preset(struct file *file, void *priv, return 0; } +/** + * vpif_s_dv_timings() - S_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: digital video timings + */ +static int vpif_s_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct vpif_params *vpifparams = &ch->vpifparams; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + struct video_obj *vid_ch = &ch->video; + struct v4l2_bt_timings *bt = &vid_ch->bt_timings; + int ret; + + if (timings->type != V4L2_DV_BT_656_1120) { + vpif_dbg(2, debug, "Timing type not defined\n"); + return -EINVAL; + } + + /* Configure subdevice timings, if any */ + ret = v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], + video, s_dv_timings, timings); + if (ret == -ENOIOCTLCMD) { + vpif_dbg(2, debug, "Custom DV timings not supported by " + "subdevice\n"); + return -EINVAL; + } + if (ret < 0) { + vpif_dbg(2, debug, "Error setting custom DV timings\n"); + return ret; + } + + if (!(timings->bt.width && timings->bt.height && + (timings->bt.hbackporch || + timings->bt.hfrontporch || + timings->bt.hsync) && + timings->bt.vfrontporch && + (timings->bt.vbackporch || + timings->bt.vsync))) { + vpif_dbg(2, debug, "Timings for width, height, " + "horizontal back porch, horizontal sync, " + "horizontal front porch, vertical back porch, " + "vertical sync and vertical back porch " + "must be defined\n"); + return -EINVAL; + } + + *bt = timings->bt; + + /* Configure video port timings */ + + std_info->eav2sav = bt->hbackporch + bt->hfrontporch + + bt->hsync - 8; + std_info->sav2eav = bt->width; + + std_info->l1 = 1; + std_info->l3 = bt->vsync + bt->vbackporch + 1; + + if (bt->interlaced) { + if (bt->il_vbackporch || bt->il_vfrontporch || bt->il_vsync) { + std_info->vsize = bt->height * 2 + + bt->vfrontporch + bt->vsync + bt->vbackporch + + bt->il_vfrontporch + bt->il_vsync + + bt->il_vbackporch; + std_info->l5 = std_info->vsize/2 - + (bt->vfrontporch - 1); + std_info->l7 = std_info->vsize/2 + 1; + std_info->l9 = std_info->l7 + bt->il_vsync + + bt->il_vbackporch + 1; + std_info->l11 = std_info->vsize - + (bt->il_vfrontporch - 1); + } else { + vpif_dbg(2, debug, "Required timing values for " + "interlaced BT format missing\n"); + return -EINVAL; + } + } else { + std_info->vsize = bt->height + bt->vfrontporch + + bt->vsync + bt->vbackporch; + std_info->l5 = std_info->vsize - (bt->vfrontporch - 1); + } + strncpy(std_info->name, "Custom timings BT656/1120", + VPIF_MAX_NAME); + std_info->width = bt->width; + std_info->height = bt->height; + std_info->frm_fmt = bt->interlaced ? 0 : 1; + std_info->ycmux_mode = 0; + std_info->capture_format = 0; + std_info->vbi_supported = 0; + std_info->hd_sd = 1; + std_info->stdid = 0; + std_info->dv_preset = V4L2_DV_INVALID; + + vid_ch->stdid = 0; + vid_ch->dv_preset = V4L2_DV_INVALID; + + return 0; +} + +/** + * vpif_g_dv_timings() - G_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: digital video timings + */ +static int vpif_g_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + struct v4l2_bt_timings *bt = &vid_ch->bt_timings; + + timings->bt = *bt; + + return 0; +} /* * vpif_g_chip_ident() - Identify the chip @@ -1498,6 +1636,8 @@ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_enum_dv_presets = vpif_enum_dv_presets, .vidioc_s_dv_preset = vpif_s_dv_preset, .vidioc_g_dv_preset = vpif_g_dv_preset, + .vidioc_s_dv_timings = vpif_s_dv_timings, + .vidioc_g_dv_timings = vpif_g_dv_timings, .vidioc_g_chip_ident = vpif_g_chip_ident, #ifdef CONFIG_VIDEO_ADV_DEBUG .vidioc_g_register = vpif_dbg_g_register, diff --git a/drivers/media/video/davinci/vpif_display.h b/drivers/media/video/davinci/vpif_display.h index 3d56b3e356a2..b53aaa883075 100644 --- a/drivers/media/video/davinci/vpif_display.h +++ b/drivers/media/video/davinci/vpif_display.h @@ -68,6 +68,7 @@ struct video_obj { v4l2_std_id stdid; /* Currently selected or default * standard */ u32 dv_preset; + struct v4l2_bt_timings bt_timings; u32 output_id; /* Current output id */ }; -- cgit v1.2.1 From 2c0ddd17741383009c53cf557d6526848c8bb917 Mon Sep 17 00:00:00 2001 From: Mats Randgaard Date: Thu, 16 Dec 2010 12:17:45 -0300 Subject: [media] vpif_cap/disp: Cleanup, improved comments Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Acked-by: Murali Karicheri Acked-by: Vaibhav Hiremath Acked-by: Manjunath Hadli Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpif.h | 13 ++++++------- drivers/media/video/davinci/vpif_capture.c | 13 ++++++------- drivers/media/video/davinci/vpif_display.c | 16 +++++++++++++--- 3 files changed, 25 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h index b6695bee3c59..10550bd93b06 100644 --- a/drivers/media/video/davinci/vpif.h +++ b/drivers/media/video/davinci/vpif.h @@ -577,11 +577,10 @@ struct vpif_channel_config_params { char name[VPIF_MAX_NAME]; /* Name of the mode */ u16 width; /* Indicates width of the image */ u16 height; /* Indicates height of the image */ - u8 frm_fmt; /* Indicates whether this is interlaced - * or progressive format */ - u8 ycmux_mode; /* Indicates whether this mode requires - * single or two channels */ - u16 eav2sav; /* length of sav 2 eav */ + u8 frm_fmt; /* Interlaced (0) or progressive (1) */ + u8 ycmux_mode; /* This mode requires one (0) or two (1) + channels */ + u16 eav2sav; /* length of eav 2 sav */ u16 sav2eav; /* length of sav 2 eav */ u16 l1, l3, l5, l7, l9, l11; /* Other parameter configurations */ u16 vsize; /* Vertical size of the image */ @@ -589,8 +588,8 @@ struct vpif_channel_config_params { * is in BT or in CCD/CMOS */ u8 vbi_supported; /* Indicates whether this mode * supports capturing vbi or not */ - u8 hd_sd; - v4l2_std_id stdid; + u8 hd_sd; /* HDTV (1) or SDTV (0) format */ + v4l2_std_id stdid; /* SDTV format */ u32 dv_preset; /* HDTV format */ }; diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c index be2b9919937c..f8e65909dc37 100644 --- a/drivers/media/video/davinci/vpif_capture.c +++ b/drivers/media/video/davinci/vpif_capture.c @@ -329,7 +329,7 @@ static void vpif_schedule_next_buffer(struct common_obj *common) * @dev_id: dev_id ptr * * It changes status of the captured buffer, takes next buffer from the queue - * and sets its address in VPIF registers + * and sets its address in VPIF registers */ static irqreturn_t vpif_channel_isr(int irq, void *dev_id) { @@ -422,14 +422,12 @@ static int vpif_update_std_info(struct channel_obj *ch) struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; struct vpif_params *vpifparams = &ch->vpifparams; const struct vpif_channel_config_params *config; - struct vpif_channel_config_params *std_info; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; struct video_obj *vid_ch = &ch->video; int index; vpif_dbg(2, debug, "vpif_update_std_info\n"); - std_info = &vpifparams->std_info; - for (index = 0; index < vpif_ch_params_count; index++) { config = &ch_params[index]; if (config->hd_sd == 0) { @@ -458,6 +456,7 @@ static int vpif_update_std_info(struct channel_obj *ch) common->fmt.fmt.pix.bytesperline = std_info->width; vpifparams->video_params.hpitch = std_info->width; vpifparams->video_params.storage_mode = std_info->frm_fmt; + return 0; } @@ -1692,7 +1691,7 @@ static int vpif_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_pix_format *pixfmt; int ret = 0; - vpif_dbg(2, debug, "VIDIOC_S_FMT\n"); + vpif_dbg(2, debug, "%s\n", __func__); /* If streaming is started, return error */ if (common->started) { @@ -2336,9 +2335,9 @@ static __init int vpif_probe(struct platform_device *pdev) if (vpif_obj.sd[i]) vpif_obj.sd[i]->grp_id = 1 << i; } - v4l2_info(&vpif_obj.v4l2_dev, "DM646x VPIF Capture driver" - " initialized\n"); + v4l2_info(&vpif_obj.v4l2_dev, + "DM646x VPIF capture driver initialized\n"); return 0; probe_subdev_out: diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index 44a885878ebf..7cb70d916f4b 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -580,7 +580,10 @@ static void vpif_config_addr(struct channel_obj *ch, int muxmode) static int vpif_mmap(struct file *filep, struct vm_area_struct *vma) { struct vpif_fh *fh = filep->private_data; - struct common_obj *common = &fh->channel->common[VPIF_VIDEO_INDEX]; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &(ch->common[VPIF_VIDEO_INDEX]); + + vpif_dbg(2, debug, "vpif_mmap\n"); return videobuf_mmap_mapper(&common->buffer_queue, vma); } @@ -692,7 +695,12 @@ static int vpif_release(struct file *filep) } /* functions implementing ioctls */ - +/** + * vpif_querycap() - QUERYCAP handler + * @file: file ptr + * @priv: file handle + * @cap: ptr to v4l2_capability structure + */ static int vpif_querycap(struct file *file, void *priv, struct v4l2_capability *cap) { @@ -1106,7 +1114,7 @@ static int vpif_streamon(struct file *file, void *priv, if (ret < 0) return ret; - /* Call videobuf_streamon to start streaming in videobuf */ + /* Call videobuf_streamon to start streaming in videobuf */ ret = videobuf_streamon(&common->buffer_queue); if (ret < 0) { vpif_err("videobuf_streamon\n"); @@ -1873,6 +1881,8 @@ static __init int vpif_probe(struct platform_device *pdev) vpif_obj.sd[i]->grp_id = 1 << i; } + v4l2_info(&vpif_obj.v4l2_dev, + "DM646x VPIF display driver initialized\n"); return 0; probe_subdev_out: -- cgit v1.2.1 From 46656afa8a9a410b7939b248712e4e48921929da Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 4 Jan 2011 06:51:35 -0300 Subject: [media] davinci: convert vpif_capture to core-assisted locking Now uses .unlocked_ioctl instead of .ioctl. Signed-off-by: Hans Verkuil Acked-by: Manjunath Hadli Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpif_capture.c | 90 +++++------------------------- 1 file changed, 14 insertions(+), 76 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c index f8e65909dc37..d93ad74a34c5 100644 --- a/drivers/media/video/davinci/vpif_capture.c +++ b/drivers/media/video/davinci/vpif_capture.c @@ -752,7 +752,7 @@ static int vpif_open(struct file *filep) struct video_obj *vid_ch; struct channel_obj *ch; struct vpif_fh *fh; - int i, ret = 0; + int i; vpif_dbg(2, debug, "vpif_open\n"); @@ -761,9 +761,6 @@ static int vpif_open(struct file *filep) vid_ch = &ch->video; common = &ch->common[VPIF_VIDEO_INDEX]; - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - if (NULL == ch->curr_subdev_info) { /** * search through the sub device to see a registered @@ -780,8 +777,7 @@ static int vpif_open(struct file *filep) } if (i == config->subdev_count) { vpif_err("No sub device registered\n"); - ret = -ENOENT; - goto exit; + return -ENOENT; } } @@ -789,8 +785,7 @@ static int vpif_open(struct file *filep) fh = kzalloc(sizeof(struct vpif_fh), GFP_KERNEL); if (NULL == fh) { vpif_err("unable to allocate memory for file handle object\n"); - ret = -ENOMEM; - goto exit; + return -ENOMEM; } /* store pointer to fh in private_data member of filep */ @@ -810,9 +805,7 @@ static int vpif_open(struct file *filep) /* Initialize priority of this instance to default priority */ fh->prio = V4L2_PRIORITY_UNSET; v4l2_prio_open(&ch->prio, &fh->prio); -exit: - mutex_unlock(&common->lock); - return ret; + return 0; } /** @@ -832,9 +825,6 @@ static int vpif_release(struct file *filep) common = &ch->common[VPIF_VIDEO_INDEX]; - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - /* if this instance is doing IO */ if (fh->io_allowed[VPIF_VIDEO_INDEX]) { /* Reset io_usrs member of channel object */ @@ -858,9 +848,6 @@ static int vpif_release(struct file *filep) /* Decrement channel usrs counter */ ch->usrs--; - /* unlock mutex on channel object */ - mutex_unlock(&common->lock); - /* Close the priority */ v4l2_prio_close(&ch->prio, fh->prio); @@ -885,7 +872,6 @@ static int vpif_reqbufs(struct file *file, void *priv, struct channel_obj *ch = fh->channel; struct common_obj *common; u8 index = 0; - int ret = 0; vpif_dbg(2, debug, "vpif_reqbufs\n"); @@ -908,13 +894,8 @@ static int vpif_reqbufs(struct file *file, void *priv, common = &ch->common[index]; - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - - if (0 != common->io_usrs) { - ret = -EBUSY; - goto reqbuf_exit; - } + if (0 != common->io_usrs) + return -EBUSY; /* Initialize videobuf queue as per the buffer type */ videobuf_queue_dma_contig_init(&common->buffer_queue, @@ -923,7 +904,7 @@ static int vpif_reqbufs(struct file *file, void *priv, reqbuf->type, common->fmt.fmt.pix.field, sizeof(struct videobuf_buffer), fh, - NULL); + &common->lock); /* Set io allowed member of file handle to TRUE */ fh->io_allowed[index] = 1; @@ -934,11 +915,7 @@ static int vpif_reqbufs(struct file *file, void *priv, INIT_LIST_HEAD(&common->dma_queue); /* Allocate buffers */ - ret = videobuf_reqbufs(&common->buffer_queue, reqbuf); - -reqbuf_exit: - mutex_unlock(&common->lock); - return ret; + return videobuf_reqbufs(&common->buffer_queue, reqbuf); } /** @@ -1152,11 +1129,6 @@ static int vpif_streamon(struct file *file, void *priv, return ret; } - if (mutex_lock_interruptible(&common->lock)) { - ret = -ERESTARTSYS; - goto streamoff_exit; - } - /* If buffer queue is empty, return error */ if (list_empty(&common->dma_queue)) { vpif_dbg(1, debug, "buffer queue is empty\n"); @@ -1235,13 +1207,10 @@ static int vpif_streamon(struct file *file, void *priv, enable_channel1(1); } channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1; - mutex_unlock(&common->lock); return ret; exit: - mutex_unlock(&common->lock); -streamoff_exit: - ret = videobuf_streamoff(&common->buffer_queue); + videobuf_streamoff(&common->buffer_queue); return ret; } @@ -1279,9 +1248,6 @@ static int vpif_streamoff(struct file *file, void *priv, return -EINVAL; } - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - /* disable channel */ if (VPIF_CHANNEL0_VIDEO == ch->channel_id) { enable_channel0(0); @@ -1299,8 +1265,6 @@ static int vpif_streamoff(struct file *file, void *priv, if (ret && (ret != -ENOIOCTLCMD)) vpif_dbg(1, debug, "stream off failed in subdev\n"); - mutex_unlock(&common->lock); - return videobuf_streamoff(&common->buffer_queue); } @@ -1376,21 +1340,16 @@ static int vpif_querystd(struct file *file, void *priv, v4l2_std_id *std_id) { struct vpif_fh *fh = priv; struct channel_obj *ch = fh->channel; - struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; int ret = 0; vpif_dbg(2, debug, "vpif_querystd\n"); - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - /* Call querystd function of decoder device */ ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], video, querystd, std_id); if (ret < 0) vpif_dbg(1, debug, "Failed to set standard for sub devices\n"); - mutex_unlock(&common->lock); return ret; } @@ -1446,18 +1405,14 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) fh->initialized = 1; /* Call encoder subdevice function to set the standard */ - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - ch->video.stdid = *std_id; ch->video.dv_preset = V4L2_DV_INVALID; memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); /* Get the information about the standard */ if (vpif_update_std_info(ch)) { - ret = -EINVAL; vpif_err("Error getting the standard info\n"); - goto s_std_exit; + return -EINVAL; } /* Configure the default format information */ @@ -1468,9 +1423,6 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) s_std, *std_id); if (ret < 0) vpif_dbg(1, debug, "Failed to set standard for sub devices\n"); - -s_std_exit: - mutex_unlock(&common->lock); return ret; } @@ -1564,9 +1516,6 @@ static int vpif_s_input(struct file *file, void *priv, unsigned int index) return -EINVAL; } - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - /* first setup input path from sub device to vpif */ if (config->setup_input_path) { ret = config->setup_input_path(ch->channel_id, @@ -1575,7 +1524,7 @@ static int vpif_s_input(struct file *file, void *priv, unsigned int index) vpif_dbg(1, debug, "couldn't setup input path for the" " sub device %s, for input index %d\n", subdev_info->name, index); - goto exit; + return ret; } } @@ -1586,7 +1535,7 @@ static int vpif_s_input(struct file *file, void *priv, unsigned int index) input, output, 0); if (ret < 0) { vpif_dbg(1, debug, "Failed to set input\n"); - goto exit; + return ret; } } vid_ch->input_idx = index; @@ -1597,9 +1546,6 @@ static int vpif_s_input(struct file *file, void *priv, unsigned int index) /* update tvnorms from the sub device input info */ ch->video_dev->tvnorms = chan_cfg->inputs[index].input.std; - -exit: - mutex_unlock(&common->lock); return ret; } @@ -1668,11 +1614,7 @@ static int vpif_g_fmt_vid_cap(struct file *file, void *priv, return -EINVAL; /* Fill in the information about format */ - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - *fmt = common->fmt; - mutex_unlock(&common->lock); return 0; } @@ -1720,12 +1662,7 @@ static int vpif_s_fmt_vid_cap(struct file *file, void *priv, if (ret) return ret; /* store the format in the channel object */ - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - common->fmt = *fmt; - mutex_unlock(&common->lock); - return 0; } @@ -2145,7 +2082,7 @@ static struct v4l2_file_operations vpif_fops = { .owner = THIS_MODULE, .open = vpif_open, .release = vpif_release, - .ioctl = video_ioctl2, + .unlocked_ioctl = video_ioctl2, .mmap = vpif_mmap, .poll = vpif_poll }; @@ -2288,6 +2225,7 @@ static __init int vpif_probe(struct platform_device *pdev) common = &(ch->common[VPIF_VIDEO_INDEX]); spin_lock_init(&common->irqlock); mutex_init(&common->lock); + ch->video_dev->lock = &common->lock; /* Initialize prio member of channel object */ v4l2_prio_init(&ch->prio); err = video_register_device(ch->video_dev, -- cgit v1.2.1 From 9bfaae24f991ff5255de17cd05838d1cd131727c Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 5 Jan 2011 13:35:45 -0300 Subject: [media] davinci: convert vpif_display to core-assisted locking vpif_display now uses .unlocked_ioctl instead of .ioctl. Signed-off-by: Hans Verkuil Acked-by: Manjunath Hadli Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpif_display.c | 98 ++++++------------------------ 1 file changed, 20 insertions(+), 78 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index 7cb70d916f4b..cdf659abdc2a 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -652,9 +652,6 @@ static int vpif_release(struct file *filep) struct channel_obj *ch = fh->channel; struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - /* if this instance is doing IO */ if (fh->io_allowed[VPIF_VIDEO_INDEX]) { /* Reset io_usrs member of channel object */ @@ -677,8 +674,6 @@ static int vpif_release(struct file *filep) config_params.numbuffers[ch->channel_id]; } - mutex_unlock(&common->lock); - /* Decrement channel usrs counter */ atomic_dec(&ch->usrs); /* If this file handle has initialize encoder device, reset it */ @@ -737,24 +732,15 @@ static int vpif_g_fmt_vid_out(struct file *file, void *priv, struct vpif_fh *fh = priv; struct channel_obj *ch = fh->channel; struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; - int ret = 0; /* Check the validity of the buffer type */ if (common->fmt.type != fmt->type) return -EINVAL; - /* Fill in the information about format */ - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - if (vpif_update_resolution(ch)) - ret = -EINVAL; - else - *fmt = common->fmt; - - mutex_unlock(&common->lock); - - return ret; + return -EINVAL; + *fmt = common->fmt; + return 0; } static int vpif_s_fmt_vid_out(struct file *file, void *priv, @@ -794,12 +780,7 @@ static int vpif_s_fmt_vid_out(struct file *file, void *priv, /* store the pix format in the channel object */ common->fmt.fmt.pix = *pixfmt; /* store the format in the channel object */ - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - common->fmt = *fmt; - mutex_unlock(&common->lock); - return 0; } @@ -829,7 +810,6 @@ static int vpif_reqbufs(struct file *file, void *priv, struct common_obj *common; enum v4l2_field field; u8 index = 0; - int ret = 0; /* This file handle has not initialized the channel, It is not allowed to do settings */ @@ -847,18 +827,12 @@ static int vpif_reqbufs(struct file *file, void *priv, index = VPIF_VIDEO_INDEX; common = &ch->common[index]; - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - if (common->fmt.type != reqbuf->type) { - ret = -EINVAL; - goto reqbuf_exit; - } + if (common->fmt.type != reqbuf->type) + return -EINVAL; - if (0 != common->io_usrs) { - ret = -EBUSY; - goto reqbuf_exit; - } + if (0 != common->io_usrs) + return -EBUSY; if (reqbuf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { if (common->fmt.fmt.pix.field == V4L2_FIELD_ANY) @@ -875,7 +849,7 @@ static int vpif_reqbufs(struct file *file, void *priv, &common->irqlock, reqbuf->type, field, sizeof(struct videobuf_buffer), fh, - NULL); + &common->lock); /* Set io allowed member of file handle to TRUE */ fh->io_allowed[index] = 1; @@ -886,11 +860,7 @@ static int vpif_reqbufs(struct file *file, void *priv, INIT_LIST_HEAD(&common->dma_queue); /* Allocate buffers */ - ret = videobuf_reqbufs(&common->buffer_queue, reqbuf); - -reqbuf_exit: - mutex_unlock(&common->lock); - return ret; + return videobuf_reqbufs(&common->buffer_queue, reqbuf); } static int vpif_querybuf(struct file *file, void *priv, @@ -1011,25 +981,19 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) } /* Call encoder subdevice function to set the standard */ - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - ch->video.stdid = *std_id; ch->video.dv_preset = V4L2_DV_INVALID; memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); /* Get the information about the standard */ - if (vpif_update_resolution(ch)) { - ret = -EINVAL; - goto s_std_exit; - } + if (vpif_update_resolution(ch)) + return -EINVAL; if ((ch->vpifparams.std_info.width * ch->vpifparams.std_info.height * 2) > config_params.channel_bufsize[ch->channel_id]) { vpif_err("invalid std for this size\n"); - ret = -EINVAL; - goto s_std_exit; + return -EINVAL; } common->fmt.fmt.pix.bytesperline = common->fmt.fmt.pix.width; @@ -1040,16 +1004,13 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) s_std_output, *std_id); if (ret < 0) { vpif_err("Failed to set output standard\n"); - goto s_std_exit; + return ret; } ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, core, s_std, *std_id); if (ret < 0) vpif_err("Failed to set standard for sub devices\n"); - -s_std_exit: - mutex_unlock(&common->lock); return ret; } @@ -1121,14 +1082,10 @@ static int vpif_streamon(struct file *file, void *priv, return ret; } - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - /* If buffer queue is empty, return error */ if (list_empty(&common->dma_queue)) { vpif_err("buffer queue is empty\n"); - ret = -EIO; - goto streamon_exit; + return -EIO; } /* Get the next frame from the buffer queue */ @@ -1154,8 +1111,7 @@ static int vpif_streamon(struct file *file, void *priv, || (!ch->vpifparams.std_info.frm_fmt && (common->fmt.fmt.pix.field == V4L2_FIELD_NONE))) { vpif_err("conflict in field format and std format\n"); - ret = -EINVAL; - goto streamon_exit; + return -EINVAL; } /* clock settings */ @@ -1164,13 +1120,13 @@ static int vpif_streamon(struct file *file, void *priv, ch->vpifparams.std_info.hd_sd); if (ret < 0) { vpif_err("can't set clock\n"); - goto streamon_exit; + return ret; } /* set the parameters and addresses */ ret = vpif_set_video_params(vpif, ch->channel_id + 2); if (ret < 0) - goto streamon_exit; + return ret; common->started = ret; vpif_config_addr(ch, ret); @@ -1195,9 +1151,6 @@ static int vpif_streamon(struct file *file, void *priv, } channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1; } - -streamon_exit: - mutex_unlock(&common->lock); return ret; } @@ -1223,9 +1176,6 @@ static int vpif_streamoff(struct file *file, void *priv, return -EINVAL; } - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) { /* disable channel */ if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { @@ -1240,8 +1190,6 @@ static int vpif_streamoff(struct file *file, void *priv, } common->started = 0; - mutex_unlock(&common->lock); - return videobuf_streamoff(&common->buffer_queue); } @@ -1288,13 +1236,9 @@ static int vpif_s_output(struct file *file, void *priv, unsigned int i) struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; int ret = 0; - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - if (common->started) { vpif_err("Streaming in progress\n"); - ret = -EBUSY; - goto s_output_exit; + return -EBUSY; } ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video, @@ -1304,9 +1248,6 @@ static int vpif_s_output(struct file *file, void *priv, unsigned int i) vpif_err("Failed to set output standard\n"); vid_ch->output_id = i; - -s_output_exit: - mutex_unlock(&common->lock); return ret; } @@ -1658,7 +1599,7 @@ static const struct v4l2_file_operations vpif_fops = { .owner = THIS_MODULE, .open = vpif_open, .release = vpif_release, - .ioctl = video_ioctl2, + .unlocked_ioctl = video_ioctl2, .mmap = vpif_mmap, .poll = vpif_poll }; @@ -1842,6 +1783,7 @@ static __init int vpif_probe(struct platform_device *pdev) v4l2_prio_init(&ch->prio); ch->common[VPIF_VIDEO_INDEX].fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + ch->video_dev->lock = &common->lock; /* register video device */ vpif_dbg(1, debug, "channel=%x,channel->video_dev=%x\n", -- cgit v1.2.1 From 90d873a7f9389478e68494c530afab8b19c04f29 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 5 Jan 2011 14:40:07 -0300 Subject: [media] radio-maxiradio.c: use sensible frequency range Use the standard USA/Europe frequency range of 87-108 MHz instead of the arbitrary 50-150 MHz. Copied from the radio-gemtek-pci driver which supports the same hardware. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-maxiradio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index 6459a220b0dd..5c2a9058c09f 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -77,8 +77,8 @@ MODULE_PARM_DESC(debug, "activates debug info"); /* TEA5757 pin mappings */ static const int clk = 1, data = 2, wren = 4, mo_st = 8, power = 16; -#define FREQ_LO (50 * 16000) -#define FREQ_HI (150 * 16000) +#define FREQ_LO (87 * 16000) +#define FREQ_HI (108 * 16000) #define FREQ_IF 171200 /* 10.7*16000 */ #define FREQ_STEP 200 /* 12.5*16 */ -- cgit v1.2.1 From 424852f4374561630d526e7bb04eec5bb7d665a1 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 5 Jan 2011 14:42:41 -0300 Subject: [media] radio-gemtek-pci: remove duplicate driver The radio-gemtek-pci driver is for the same hardware as the radio-maxiradio driver which uses the same GemTek PR103 and tea5757 combination and the two drivers are identical. I chose the maxiradio over the gemtek-pci driver since the maxiradio has support for mono/stereo detection. Tested with my gemtek-pci card. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/Kconfig | 14 - drivers/media/radio/Makefile | 1 - drivers/media/radio/radio-gemtek-pci.c | 478 --------------------------------- 3 files changed, 493 deletions(-) delete mode 100644 drivers/media/radio/radio-gemtek-pci.c (limited to 'drivers') diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 3c5a4739ed70..ecdffa6aac66 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -151,20 +151,6 @@ config RADIO_GEMTEK_PROBE following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and 0x28c. -config RADIO_GEMTEK_PCI - tristate "GemTek PCI Radio Card support" - depends on VIDEO_V4L2 && PCI - ---help--- - Choose Y here if you have this PCI FM radio card. - - In order to control your radio card, you will need to use programs - that are compatible with the Video for Linux API. Information on - this API and pointers to "v4l" programs may be found at - . - - To compile this driver as a module, choose M here: the - module will be called radio-gemtek-pci. - config RADIO_MAXIRADIO tristate "Guillemot MAXI Radio FM 2000 radio" depends on VIDEO_V4L2 && PCI diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile index d2970748a69f..717656d2f749 100644 --- a/drivers/media/radio/Makefile +++ b/drivers/media/radio/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_RADIO_MAXIRADIO) += radio-maxiradio.o obj-$(CONFIG_RADIO_RTRACK) += radio-aimslab.o obj-$(CONFIG_RADIO_ZOLTRIX) += radio-zoltrix.o obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o -obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o obj-$(CONFIG_RADIO_TRUST) += radio-trust.o obj-$(CONFIG_I2C_SI4713) += si4713-i2c.o obj-$(CONFIG_RADIO_SI4713) += radio-si4713.o diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c deleted file mode 100644 index 28fa85ba2087..000000000000 --- a/drivers/media/radio/radio-gemtek-pci.c +++ /dev/null @@ -1,478 +0,0 @@ -/* - *************************************************************************** - * - * radio-gemtek-pci.c - Gemtek PCI Radio driver - * (C) 2001 Vladimir Shebordaev - * - *************************************************************************** - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - * USA. - * - *************************************************************************** - * - * Gemtek Corp still silently refuses to release any specifications - * of their multimedia devices, so the protocol still has to be - * reverse engineered. - * - * The v4l code was inspired by Jonas Munsin's Gemtek serial line - * radio device driver. - * - * Please, let me know if this piece of code was useful :) - * - * TODO: multiple device support and portability were not tested - * - * Converted to V4L2 API by Mauro Carvalho Chehab - * - *************************************************************************** - */ - -#include -#include -#include -#include -#include -#include -#include -#include /* for KERNEL_VERSION MACRO */ -#include -#include -#include -#include - -MODULE_AUTHOR("Vladimir Shebordaev "); -MODULE_DESCRIPTION("The video4linux driver for the Gemtek PCI Radio Card"); -MODULE_LICENSE("GPL"); - -static int nr_radio = -1; -static int mx = 1; - -module_param(mx, bool, 0); -MODULE_PARM_DESC(mx, "single digit: 1 - turn off the turner upon module exit (default), 0 - do not"); -module_param(nr_radio, int, 0); -MODULE_PARM_DESC(nr_radio, "video4linux device number to use"); - -#define RADIO_VERSION KERNEL_VERSION(0, 0, 2) - -#ifndef PCI_VENDOR_ID_GEMTEK -#define PCI_VENDOR_ID_GEMTEK 0x5046 -#endif - -#ifndef PCI_DEVICE_ID_GEMTEK_PR103 -#define PCI_DEVICE_ID_GEMTEK_PR103 0x1001 -#endif - -#ifndef GEMTEK_PCI_RANGE_LOW -#define GEMTEK_PCI_RANGE_LOW (87*16000) -#endif - -#ifndef GEMTEK_PCI_RANGE_HIGH -#define GEMTEK_PCI_RANGE_HIGH (108*16000) -#endif - -struct gemtek_pci { - struct v4l2_device v4l2_dev; - struct video_device vdev; - struct mutex lock; - struct pci_dev *pdev; - - u32 iobase; - u32 length; - - u32 current_frequency; - u8 mute; -}; - -static inline struct gemtek_pci *to_gemtek_pci(struct v4l2_device *v4l2_dev) -{ - return container_of(v4l2_dev, struct gemtek_pci, v4l2_dev); -} - -static inline u8 gemtek_pci_out(u16 value, u32 port) -{ - outw(value, port); - - return (u8)value; -} - -#define _b0(v) (*((u8 *)&v)) - -static void __gemtek_pci_cmd(u16 value, u32 port, u8 *last_byte, int keep) -{ - u8 byte = *last_byte; - - if (!value) { - if (!keep) - value = (u16)port; - byte &= 0xfd; - } else - byte |= 2; - - _b0(value) = byte; - outw(value, port); - byte |= 1; - _b0(value) = byte; - outw(value, port); - byte &= 0xfe; - _b0(value) = byte; - outw(value, port); - - *last_byte = byte; -} - -static inline void gemtek_pci_nil(u32 port, u8 *last_byte) -{ - __gemtek_pci_cmd(0x00, port, last_byte, false); -} - -static inline void gemtek_pci_cmd(u16 cmd, u32 port, u8 *last_byte) -{ - __gemtek_pci_cmd(cmd, port, last_byte, true); -} - -static void gemtek_pci_setfrequency(struct gemtek_pci *card, unsigned long frequency) -{ - int i; - u32 value = frequency / 200 + 856; - u16 mask = 0x8000; - u8 last_byte; - u32 port = card->iobase; - - mutex_lock(&card->lock); - card->current_frequency = frequency; - last_byte = gemtek_pci_out(0x06, port); - - i = 0; - do { - gemtek_pci_nil(port, &last_byte); - i++; - } while (i < 9); - - i = 0; - do { - gemtek_pci_cmd(value & mask, port, &last_byte); - mask >>= 1; - i++; - } while (i < 16); - - outw(0x10, port); - mutex_unlock(&card->lock); -} - - -static void gemtek_pci_mute(struct gemtek_pci *card) -{ - mutex_lock(&card->lock); - outb(0x1f, card->iobase); - card->mute = true; - mutex_unlock(&card->lock); -} - -static void gemtek_pci_unmute(struct gemtek_pci *card) -{ - if (card->mute) { - gemtek_pci_setfrequency(card, card->current_frequency); - card->mute = false; - } -} - -static int gemtek_pci_getsignal(struct gemtek_pci *card) -{ - int sig; - - mutex_lock(&card->lock); - sig = (inb(card->iobase) & 0x08) ? 0 : 1; - mutex_unlock(&card->lock); - return sig; -} - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - struct gemtek_pci *card = video_drvdata(file); - - strlcpy(v->driver, "radio-gemtek-pci", sizeof(v->driver)); - strlcpy(v->card, "GemTek PCI Radio", sizeof(v->card)); - snprintf(v->bus_info, sizeof(v->bus_info), "PCI:%s", pci_name(card->pdev)); - v->version = RADIO_VERSION; - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct gemtek_pci *card = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; - - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = GEMTEK_PCI_RANGE_LOW; - v->rangehigh = GEMTEK_PCI_RANGE_HIGH; - v->rxsubchans = V4L2_TUNER_SUB_MONO; - v->capability = V4L2_TUNER_CAP_LOW; - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = 0xffff * gemtek_pci_getsignal(card); - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - return v->index ? -EINVAL : 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct gemtek_pci *card = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - if (f->frequency < GEMTEK_PCI_RANGE_LOW || - f->frequency > GEMTEK_PCI_RANGE_HIGH) - return -EINVAL; - gemtek_pci_setfrequency(card, f->frequency); - card->mute = false; - return 0; -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct gemtek_pci *card = video_drvdata(file); - - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = card->current_frequency; - return 0; -} - -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 65535, 65535, 65535); - } - return -EINVAL; -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct gemtek_pci *card = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = card->mute; - return 0; - case V4L2_CID_AUDIO_VOLUME: - if (card->mute) - ctrl->value = 0; - else - ctrl->value = 65535; - return 0; - } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct gemtek_pci *card = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value) - gemtek_pci_mute(card); - else - gemtek_pci_unmute(card); - return 0; - case V4L2_CID_AUDIO_VOLUME: - if (ctrl->value) - gemtek_pci_unmute(card); - else - gemtek_pci_mute(card); - return 0; - } - return -EINVAL; -} - -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; - return 0; -} - -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - return a->index ? -EINVAL : 0; -} - -enum { - GEMTEK_PR103 -}; - -static char *card_names[] __devinitdata = { - "GEMTEK_PR103" -}; - -static struct pci_device_id gemtek_pci_id[] = -{ - { PCI_VENDOR_ID_GEMTEK, PCI_DEVICE_ID_GEMTEK_PR103, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, GEMTEK_PR103 }, - { 0 } -}; - -MODULE_DEVICE_TABLE(pci, gemtek_pci_id); - -static const struct v4l2_file_operations gemtek_pci_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, -}; - -static const struct v4l2_ioctl_ops gemtek_pci_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, -}; - -static int __devinit gemtek_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) -{ - struct gemtek_pci *card; - struct v4l2_device *v4l2_dev; - int res; - - card = kzalloc(sizeof(struct gemtek_pci), GFP_KERNEL); - if (card == NULL) { - dev_err(&pdev->dev, "out of memory\n"); - return -ENOMEM; - } - - v4l2_dev = &card->v4l2_dev; - mutex_init(&card->lock); - card->pdev = pdev; - - strlcpy(v4l2_dev->name, "gemtek_pci", sizeof(v4l2_dev->name)); - - res = v4l2_device_register(&pdev->dev, v4l2_dev); - if (res < 0) { - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - kfree(card); - return res; - } - - if (pci_enable_device(pdev)) - goto err_pci; - - card->iobase = pci_resource_start(pdev, 0); - card->length = pci_resource_len(pdev, 0); - - if (request_region(card->iobase, card->length, card_names[pci_id->driver_data]) == NULL) { - v4l2_err(v4l2_dev, "i/o port already in use\n"); - goto err_pci; - } - - strlcpy(card->vdev.name, v4l2_dev->name, sizeof(card->vdev.name)); - card->vdev.v4l2_dev = v4l2_dev; - card->vdev.fops = &gemtek_pci_fops; - card->vdev.ioctl_ops = &gemtek_pci_ioctl_ops; - card->vdev.release = video_device_release_empty; - video_set_drvdata(&card->vdev, card); - - gemtek_pci_mute(card); - - if (video_register_device(&card->vdev, VFL_TYPE_RADIO, nr_radio) < 0) - goto err_video; - - v4l2_info(v4l2_dev, "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n", - pdev->revision, card->iobase, card->iobase + card->length - 1); - - return 0; - -err_video: - release_region(card->iobase, card->length); - -err_pci: - v4l2_device_unregister(v4l2_dev); - kfree(card); - return -ENODEV; -} - -static void __devexit gemtek_pci_remove(struct pci_dev *pdev) -{ - struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); - struct gemtek_pci *card = to_gemtek_pci(v4l2_dev); - - video_unregister_device(&card->vdev); - v4l2_device_unregister(v4l2_dev); - - release_region(card->iobase, card->length); - - if (mx) - gemtek_pci_mute(card); - - kfree(card); -} - -static struct pci_driver gemtek_pci_driver = { - .name = "gemtek_pci", - .id_table = gemtek_pci_id, - .probe = gemtek_pci_probe, - .remove = __devexit_p(gemtek_pci_remove), -}; - -static int __init gemtek_pci_init(void) -{ - return pci_register_driver(&gemtek_pci_driver); -} - -static void __exit gemtek_pci_exit(void) -{ - pci_unregister_driver(&gemtek_pci_driver); -} - -module_init(gemtek_pci_init); -module_exit(gemtek_pci_exit); -- cgit v1.2.1 From 82f4b5b67e795fe03952b278873712e4562304d2 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Fri, 7 Jan 2011 21:59:11 -0300 Subject: [media] af9013: fix AF9013 TDA18271 IF config IF freq for DVB-T 7 MHz and 8 MHz was set slightly wrong. Due to that it didn't worked at all (?) for 7 MHz channels and most likely performance was dropped for 8 MHz channels. That bug was pointed by few people during last two months. Thank you. Trivial fix. Compile tested only due to lack of proper HW and signal. Signed-off-by: Antti Palosaari Cc: Romolo Manfredini Cc: Alireza Moini Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/af9013.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c index ce222055526d..ba25fa0b0fc2 100644 --- a/drivers/media/dvb/frontends/af9013.c +++ b/drivers/media/dvb/frontends/af9013.c @@ -334,11 +334,11 @@ static int af9013_set_freq_ctrl(struct af9013_state *state, fe_bandwidth_t bw) if_sample_freq = 3300000; /* 3.3 MHz */ break; case BANDWIDTH_7_MHZ: - if_sample_freq = 3800000; /* 3.8 MHz */ + if_sample_freq = 3500000; /* 3.5 MHz */ break; case BANDWIDTH_8_MHZ: default: - if_sample_freq = 4300000; /* 4.3 MHz */ + if_sample_freq = 4000000; /* 4.0 MHz */ break; } } else if (state->config.tuner == AF9013_TUNER_TDA18218) { -- cgit v1.2.1 From 4e770f7602fb2285f3106f98109d0685618ddc22 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 30 Dec 2010 13:11:21 -0300 Subject: [media] gspca_main: Locking fixes 1 The gspca_dev->streaming boolean is protected against multiple access through gspca_dev->queue_lock everywhere except for 2 places. This patch fixes this by bringing it under the lock in vidioc_streamoff. And by removing the check for gspca_dev->streaming in gspca_disconnect, the destroy_urbs call may be called multiple times (and is protected by the usb_lock) and calling wake_up_interruptible can also always be done safely. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 442970073e8a..74626b6a9eb4 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1630,11 +1630,15 @@ static int vidioc_streamoff(struct file *file, void *priv, if (buf_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; - if (!gspca_dev->streaming) - return 0; + if (mutex_lock_interruptible(&gspca_dev->queue_lock)) return -ERESTARTSYS; + if (!gspca_dev->streaming) { + ret = 0; + goto out; + } + /* check the capture file */ if (gspca_dev->capt_file != file) { ret = -EBUSY; @@ -2341,12 +2345,11 @@ void gspca_disconnect(struct usb_interface *intf) PDEBUG(D_PROBE, "%s disconnect", video_device_node_name(&gspca_dev->vdev)); mutex_lock(&gspca_dev->usb_lock); + gspca_dev->present = 0; + wake_up_interruptible(&gspca_dev->wq); - if (gspca_dev->streaming) { - destroy_urbs(gspca_dev); - wake_up_interruptible(&gspca_dev->wq); - } + destroy_urbs(gspca_dev); #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) gspca_input_destroy_urb(gspca_dev); -- cgit v1.2.1 From 27074efa2ee8c1ef07dc5f644104e35d39e43322 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 30 Dec 2010 19:54:33 -0300 Subject: [media] gspca_main: Locking fixes 2 Before this patch vidioc_dqbuf is using its own read_lock, where as other queue related functions use queue_lock. This means that dqbuf is accessing several variables in a racy manor. The most important one being fr_o, which may be changed from underneath dqbuf by vidioc_reqbufs or vidioc_streamoff. Other variables which it accesses unprotected are gspca_dev->memory, gspca_dev->streaming and gspca_dev->capt_file. This patch fixes this by changing vidioc_dqbuf to also use the queue_lock. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 112 ++++++++++++++++++++------------------ drivers/media/video/gspca/gspca.h | 1 - 2 files changed, 58 insertions(+), 55 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 74626b6a9eb4..64ecf669d655 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1831,33 +1831,77 @@ out: return ret; } +static int frame_ready_nolock(struct gspca_dev *gspca_dev, struct file *file, + enum v4l2_memory memory) +{ + if (!gspca_dev->present) + return -ENODEV; + if (gspca_dev->capt_file != file || gspca_dev->memory != memory || + !gspca_dev->streaming) + return -EINVAL; + + /* check if a frame is ready */ + return gspca_dev->fr_o != atomic_read(&gspca_dev->fr_i); +} + +static int frame_ready(struct gspca_dev *gspca_dev, struct file *file, + enum v4l2_memory memory) +{ + int ret; + + if (mutex_lock_interruptible(&gspca_dev->queue_lock)) + return -ERESTARTSYS; + ret = frame_ready_nolock(gspca_dev, file, memory); + mutex_unlock(&gspca_dev->queue_lock); + return ret; +} + /* - * wait for a video frame + * dequeue a video buffer * - * If a frame is ready, its index is returned. + * If nonblock_ing is false, block until a buffer is available. */ -static int frame_wait(struct gspca_dev *gspca_dev, - int nonblock_ing) +static int vidioc_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *v4l2_buf) { - int i, ret; + struct gspca_dev *gspca_dev = priv; + struct gspca_frame *frame; + int i, j, ret; - /* check if a frame is ready */ - i = gspca_dev->fr_o; - if (i == atomic_read(&gspca_dev->fr_i)) { - if (nonblock_ing) + PDEBUG(D_FRAM, "dqbuf"); + + if (mutex_lock_interruptible(&gspca_dev->queue_lock)) + return -ERESTARTSYS; + + for (;;) { + ret = frame_ready_nolock(gspca_dev, file, v4l2_buf->memory); + if (ret < 0) + goto out; + if (ret > 0) + break; + + mutex_unlock(&gspca_dev->queue_lock); + + if (file->f_flags & O_NONBLOCK) return -EAGAIN; /* wait till a frame is ready */ ret = wait_event_interruptible_timeout(gspca_dev->wq, - i != atomic_read(&gspca_dev->fr_i) || - !gspca_dev->streaming || !gspca_dev->present, + frame_ready(gspca_dev, file, v4l2_buf->memory), msecs_to_jiffies(3000)); if (ret < 0) return ret; - if (ret == 0 || !gspca_dev->streaming || !gspca_dev->present) + if (ret == 0) return -EIO; + + if (mutex_lock_interruptible(&gspca_dev->queue_lock)) + return -ERESTARTSYS; } + i = gspca_dev->fr_o; + j = gspca_dev->fr_queue[i]; + frame = &gspca_dev->frame[j]; + gspca_dev->fr_o = (i + 1) % GSPCA_MAX_FRAMES; if (gspca_dev->sd_desc->dq_callback) { @@ -1867,46 +1911,7 @@ static int frame_wait(struct gspca_dev *gspca_dev, gspca_dev->sd_desc->dq_callback(gspca_dev); mutex_unlock(&gspca_dev->usb_lock); } - return gspca_dev->fr_queue[i]; -} - -/* - * dequeue a video buffer - * - * If nonblock_ing is false, block until a buffer is available. - */ -static int vidioc_dqbuf(struct file *file, void *priv, - struct v4l2_buffer *v4l2_buf) -{ - struct gspca_dev *gspca_dev = priv; - struct gspca_frame *frame; - int i, ret; - - PDEBUG(D_FRAM, "dqbuf"); - if (v4l2_buf->memory != gspca_dev->memory) - return -EINVAL; - if (!gspca_dev->present) - return -ENODEV; - - /* if not streaming, be sure the application will not loop forever */ - if (!(file->f_flags & O_NONBLOCK) - && !gspca_dev->streaming && gspca_dev->users == 1) - return -EINVAL; - - /* only the capturing file may dequeue */ - if (gspca_dev->capt_file != file) - return -EINVAL; - - /* only one dequeue / read at a time */ - if (mutex_lock_interruptible(&gspca_dev->read_lock)) - return -ERESTARTSYS; - - ret = frame_wait(gspca_dev, file->f_flags & O_NONBLOCK); - if (ret < 0) - goto out; - i = ret; /* frame index */ - frame = &gspca_dev->frame[i]; if (gspca_dev->memory == V4L2_MEMORY_USERPTR) { if (copy_to_user((__u8 __user *) frame->v4l2_buf.m.userptr, frame->data, @@ -1919,10 +1924,10 @@ static int vidioc_dqbuf(struct file *file, void *priv, } frame->v4l2_buf.flags &= ~V4L2_BUF_FLAG_DONE; memcpy(v4l2_buf, &frame->v4l2_buf, sizeof *v4l2_buf); - PDEBUG(D_FRAM, "dqbuf %d", i); + PDEBUG(D_FRAM, "dqbuf %d", j); ret = 0; out: - mutex_unlock(&gspca_dev->read_lock); + mutex_unlock(&gspca_dev->queue_lock); return ret; } @@ -2270,7 +2275,6 @@ int gspca_dev_probe2(struct usb_interface *intf, goto out; mutex_init(&gspca_dev->usb_lock); - mutex_init(&gspca_dev->read_lock); mutex_init(&gspca_dev->queue_lock); init_waitqueue_head(&gspca_dev->wq); diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 97b77a26a2eb..a2a1a6aa0606 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -205,7 +205,6 @@ struct gspca_dev { wait_queue_head_t wq; /* wait queue */ struct mutex usb_lock; /* usb exchange protection */ - struct mutex read_lock; /* read protection */ struct mutex queue_lock; /* ISOC queue protection */ int usb_err; /* USB error - protected by usb_lock */ u16 pkt_size; /* ISOC packet size */ -- cgit v1.2.1 From 4a82bc60a9abbfca0c899366ff30c592e8020520 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 30 Dec 2010 20:00:17 -0300 Subject: [media] gspca_main: Update buffer flags even when user_copy fails Before this patch dqbuf errors out on a failing user_copy (with user pointers) before updating the buffer flags, causing a successsfully dequeued buffer to still have the DONE flag, which means that it could no longer be re-queueud (assuming the app somehow survives the segfault). Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 64ecf669d655..fbc5666ee29e 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1912,6 +1912,11 @@ static int vidioc_dqbuf(struct file *file, void *priv, mutex_unlock(&gspca_dev->usb_lock); } + frame->v4l2_buf.flags &= ~V4L2_BUF_FLAG_DONE; + memcpy(v4l2_buf, &frame->v4l2_buf, sizeof *v4l2_buf); + PDEBUG(D_FRAM, "dqbuf %d", j); + ret = 0; + if (gspca_dev->memory == V4L2_MEMORY_USERPTR) { if (copy_to_user((__u8 __user *) frame->v4l2_buf.m.userptr, frame->data, @@ -1919,13 +1924,8 @@ static int vidioc_dqbuf(struct file *file, void *priv, PDEBUG(D_ERR|D_STREAM, "dqbuf cp to user failed"); ret = -EFAULT; - goto out; } } - frame->v4l2_buf.flags &= ~V4L2_BUF_FLAG_DONE; - memcpy(v4l2_buf, &frame->v4l2_buf, sizeof *v4l2_buf); - PDEBUG(D_FRAM, "dqbuf %d", j); - ret = 0; out: mutex_unlock(&gspca_dev->queue_lock); return ret; -- cgit v1.2.1 From 7f6eb118df84715b128e25e99dc6a3ebc5b133d6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 30 Dec 2010 20:20:09 -0300 Subject: [media] gspca_main: Remove no longer used users variable Remove the no longer used / useful users variable, and with that gone there also is no longer a need to take queue_lock in dev_open. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 32 +++++--------------------------- drivers/media/video/gspca/gspca.h | 1 - 2 files changed, 5 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index fbc5666ee29e..0ba42dd4b99b 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1210,29 +1210,15 @@ static void gspca_release(struct video_device *vfd) static int dev_open(struct file *file) { struct gspca_dev *gspca_dev; - int ret; PDEBUG(D_STREAM, "[%s] open", current->comm); gspca_dev = (struct gspca_dev *) video_devdata(file); - if (mutex_lock_interruptible(&gspca_dev->queue_lock)) - return -ERESTARTSYS; - if (!gspca_dev->present) { - ret = -ENODEV; - goto out; - } - - if (gspca_dev->users > 4) { /* (arbitrary value) */ - ret = -EBUSY; - goto out; - } + if (!gspca_dev->present) + return -ENODEV; /* protect the subdriver against rmmod */ - if (!try_module_get(gspca_dev->module)) { - ret = -ENODEV; - goto out; - } - - gspca_dev->users++; + if (!try_module_get(gspca_dev->module)) + return -ENODEV; file->private_data = gspca_dev; #ifdef GSPCA_DEBUG @@ -1244,14 +1230,7 @@ static int dev_open(struct file *file) gspca_dev->vdev.debug &= ~(V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG); #endif - ret = 0; -out: - mutex_unlock(&gspca_dev->queue_lock); - if (ret != 0) - PDEBUG(D_ERR|D_STREAM, "open failed err %d", ret); - else - PDEBUG(D_STREAM, "open done"); - return ret; + return 0; } static int dev_close(struct file *file) @@ -1261,7 +1240,6 @@ static int dev_close(struct file *file) PDEBUG(D_STREAM, "[%s] close", current->comm); if (mutex_lock_interruptible(&gspca_dev->queue_lock)) return -ERESTARTSYS; - gspca_dev->users--; /* if the file did the capture, free the streaming resources */ if (gspca_dev->capt_file == file) { diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index a2a1a6aa0606..41755226d389 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -211,7 +211,6 @@ struct gspca_dev { #ifdef CONFIG_PM char frozen; /* suspend - resume */ #endif - char users; /* number of opens */ char present; /* device connected */ char nbufread; /* number of buffers for read() */ char memory; /* memory type (V4L2_MEMORY_xxx) */ -- cgit v1.2.1 From d642de2ed472df308f8ee49417e29030f69b2095 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 31 Dec 2010 04:51:36 -0300 Subject: [media] gspca_main: Set memory type to GSPCA_MEMORY_NO on buffer release Before this patch we were not setting the memory type to GSPCA_MEMORY_NO when the buffers were released by the app doing a reqbufs 0. Nor would the memory type be set to GSPCA_MEMORY_NO on device close, as capture_file already is NULL on device close because of the reqbufs 0. This caused the following problem: -app1 does reqbufs USERPTR for 4 buffers -app1 does reqbufs USERPTR for 0 buffers -app2 tries to do reqbufs MMAP for 4 buffers fails because gspca_dev->memory still is USERPTR Fixing this also allows an app to switch memory type's by unrequesting the buffers and re-requesting them of a different type. This patch also moves the setting of gspca_dev->frsz and gscpa_dev->memory to after alloc_frame succeeding, so that they are not changed when allocating fails. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 0ba42dd4b99b..adab34f91a68 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -508,8 +508,8 @@ static int gspca_is_compressed(__u32 format) return 0; } -static int frame_alloc(struct gspca_dev *gspca_dev, - unsigned int count) +static int frame_alloc(struct gspca_dev *gspca_dev, struct file *file, + enum v4l2_memory memory, unsigned int count) { struct gspca_frame *frame; unsigned int frsz; @@ -519,7 +519,6 @@ static int frame_alloc(struct gspca_dev *gspca_dev, frsz = gspca_dev->cam.cam_mode[i].sizeimage; PDEBUG(D_STREAM, "frame alloc frsz: %d", frsz); frsz = PAGE_ALIGN(frsz); - gspca_dev->frsz = frsz; if (count >= GSPCA_MAX_FRAMES) count = GSPCA_MAX_FRAMES - 1; gspca_dev->frbuf = vmalloc_32(frsz * count); @@ -527,6 +526,9 @@ static int frame_alloc(struct gspca_dev *gspca_dev, err("frame alloc failed"); return -ENOMEM; } + gspca_dev->capt_file = file; + gspca_dev->memory = memory; + gspca_dev->frsz = frsz; gspca_dev->nframes = count; for (i = 0; i < count; i++) { frame = &gspca_dev->frame[i]; @@ -535,7 +537,7 @@ static int frame_alloc(struct gspca_dev *gspca_dev, frame->v4l2_buf.flags = 0; frame->v4l2_buf.field = V4L2_FIELD_NONE; frame->v4l2_buf.length = frsz; - frame->v4l2_buf.memory = gspca_dev->memory; + frame->v4l2_buf.memory = memory; frame->v4l2_buf.sequence = 0; frame->data = gspca_dev->frbuf + i * frsz; frame->v4l2_buf.m.offset = i * frsz; @@ -558,6 +560,9 @@ static void frame_free(struct gspca_dev *gspca_dev) gspca_dev->frame[i].data = NULL; } gspca_dev->nframes = 0; + gspca_dev->frsz = 0; + gspca_dev->capt_file = NULL; + gspca_dev->memory = GSPCA_MEMORY_NO; } static void destroy_urbs(struct gspca_dev *gspca_dev) @@ -1250,8 +1255,6 @@ static int dev_close(struct file *file) mutex_unlock(&gspca_dev->usb_lock); } frame_free(gspca_dev); - gspca_dev->capt_file = NULL; - gspca_dev->memory = GSPCA_MEMORY_NO; } file->private_data = NULL; module_put(gspca_dev->module); @@ -1524,17 +1527,13 @@ static int vidioc_reqbufs(struct file *file, void *priv, } /* free the previous allocated buffers, if any */ - if (gspca_dev->nframes != 0) { + if (gspca_dev->nframes != 0) frame_free(gspca_dev); - gspca_dev->capt_file = NULL; - } if (rb->count == 0) /* unrequest */ goto out; - gspca_dev->memory = rb->memory; - ret = frame_alloc(gspca_dev, rb->count); + ret = frame_alloc(gspca_dev, file, rb->memory, rb->count); if (ret == 0) { rb->count = gspca_dev->nframes; - gspca_dev->capt_file = file; if (streaming) ret = gspca_init_transfer(gspca_dev); } -- cgit v1.2.1 From ee3629914b2b115f00f4197e80b1e7cb12881059 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 31 Dec 2010 05:05:56 -0300 Subject: [media] gspca_main: Simplify read mode memory type checks gspca_dev->memory == GSPCA_MEMORY_NO implies gspca_dev->nframes == 0, so there is no need to check for both in dev_poll. The check in dev_read also is more complex then needed, as dqbuf which dev_read calls already does all necessary checks. Moreover dqbuf is holding the proper locks while checking where as dev_read itself is not. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index adab34f91a68..244fb76eaead 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -2019,9 +2019,7 @@ static unsigned int dev_poll(struct file *file, poll_table *wait) poll_wait(file, &gspca_dev->wq, wait); /* if reqbufs is not done, the user would use read() */ - if (gspca_dev->nframes == 0) { - if (gspca_dev->memory != GSPCA_MEMORY_NO) - return POLLERR; /* not the 1st time */ + if (gspca_dev->memory == GSPCA_MEMORY_NO) { ret = read_alloc(gspca_dev, file); if (ret != 0) return POLLERR; @@ -2053,18 +2051,10 @@ static ssize_t dev_read(struct file *file, char __user *data, PDEBUG(D_FRAM, "read (%zd)", count); if (!gspca_dev->present) return -ENODEV; - switch (gspca_dev->memory) { - case GSPCA_MEMORY_NO: /* first time */ + if (gspca_dev->memory == GSPCA_MEMORY_NO) { /* first time ? */ ret = read_alloc(gspca_dev, file); if (ret != 0) return ret; - break; - case GSPCA_MEMORY_READ: - if (gspca_dev->capt_file == file) - break; - /* fall thru */ - default: - return -EINVAL; } /* get a frame */ -- cgit v1.2.1 From ce5610bca74571674c1970d33063e7c06295a9a4 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 31 Dec 2010 07:41:54 -0300 Subject: [media] gspca_main: Allow switching from read to mmap / userptr mode Some applications (xawtv, qv4l2) mix read and mmap calls. Allow switching from read mode back to mmap mode (by doing a reqbufs). Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 244fb76eaead..4ab906be8962 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1497,6 +1497,7 @@ static int vidioc_reqbufs(struct file *file, void *priv, return -ERESTARTSYS; if (gspca_dev->memory != GSPCA_MEMORY_NO + && gspca_dev->memory != GSPCA_MEMORY_READ && gspca_dev->memory != rb->memory) { ret = -EBUSY; goto out; @@ -1525,6 +1526,9 @@ static int vidioc_reqbufs(struct file *file, void *priv, gspca_stream_off(gspca_dev); mutex_unlock(&gspca_dev->usb_lock); } + /* Don't restart the stream when switching from read to mmap mode */ + if (gspca_dev->memory == GSPCA_MEMORY_READ) + streaming = 0; /* free the previous allocated buffers, if any */ if (gspca_dev->nframes != 0) -- cgit v1.2.1 From 0d0ae15dde7d4a778056268e64bb2625f84deab6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 31 Dec 2010 17:17:51 -0300 Subject: [media] gspca_main: wake wq on streamoff We check for not streaming as a condition to abort waiting in dqbuf, so when another thread does a streamoff we should wake the wq. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 4ab906be8962..3581dea3c1f7 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1634,6 +1634,8 @@ static int vidioc_streamoff(struct file *file, void *priv, gspca_dev->usb_err = 0; gspca_stream_off(gspca_dev); mutex_unlock(&gspca_dev->usb_lock); + /* In case another thread is waiting in dqbuf */ + wake_up_interruptible(&gspca_dev->wq); /* empty the transfer queues */ atomic_set(&gspca_dev->fr_q, 0); -- cgit v1.2.1 From 8b064ee19d24e57d807060f50e945b5935565852 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 3 Jan 2011 12:48:10 -0300 Subject: [media] et61x251: remove wrongly claimed usb ids The et61x251 driver claims a whole list of usb id's, but it only has one sensor "module" which does sensor detection based on usb id and that only supports devices with the 102c:6251 usb id. Remove the usb-ids for other devices as for those the driver will fail with an unable to determine sensor type message anyways. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/et61x251/et61x251.h | 24 ------------------------ 1 file changed, 24 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/et61x251/et61x251.h b/drivers/media/video/et61x251/et61x251.h index cc77d144df3c..bf66189cb26d 100644 --- a/drivers/media/video/et61x251/et61x251.h +++ b/drivers/media/video/et61x251/et61x251.h @@ -59,31 +59,7 @@ /*****************************************************************************/ static const struct usb_device_id et61x251_id_table[] = { - { USB_DEVICE(0x102c, 0x6151), }, { USB_DEVICE(0x102c, 0x6251), }, - { USB_DEVICE(0x102c, 0x6253), }, - { USB_DEVICE(0x102c, 0x6254), }, - { USB_DEVICE(0x102c, 0x6255), }, - { USB_DEVICE(0x102c, 0x6256), }, - { USB_DEVICE(0x102c, 0x6257), }, - { USB_DEVICE(0x102c, 0x6258), }, - { USB_DEVICE(0x102c, 0x6259), }, - { USB_DEVICE(0x102c, 0x625a), }, - { USB_DEVICE(0x102c, 0x625b), }, - { USB_DEVICE(0x102c, 0x625c), }, - { USB_DEVICE(0x102c, 0x625d), }, - { USB_DEVICE(0x102c, 0x625e), }, - { USB_DEVICE(0x102c, 0x625f), }, - { USB_DEVICE(0x102c, 0x6260), }, - { USB_DEVICE(0x102c, 0x6261), }, - { USB_DEVICE(0x102c, 0x6262), }, - { USB_DEVICE(0x102c, 0x6263), }, - { USB_DEVICE(0x102c, 0x6264), }, - { USB_DEVICE(0x102c, 0x6265), }, - { USB_DEVICE(0x102c, 0x6266), }, - { USB_DEVICE(0x102c, 0x6267), }, - { USB_DEVICE(0x102c, 0x6268), }, - { USB_DEVICE(0x102c, 0x6269), }, { } }; -- cgit v1.2.1 From a24f0c5c47946b1a1999f44808e2219e7758d146 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 5 Jan 2011 11:36:54 -0300 Subject: [media] sn9c102: Remove not supported and non existing usb ids The sn9c102 driver claims a number of usb-ids which are for cameras with sensor types which it does not support. Also it claims a number of usb-ids which do not exist at all (not present in the windows drivers .inf files, not known by google). This patch also fixes the conflict with the gspca_sonixj driver for the 0c45:60c0 and 0c45:60fb usb ids. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/sn9c102/sn9c102_devtable.h | 66 ++++++++++++-------------- 1 file changed, 31 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h index 41064c7b5ef8..74bc719b8e89 100644 --- a/drivers/media/video/sn9c102/sn9c102_devtable.h +++ b/drivers/media/video/sn9c102/sn9c102_devtable.h @@ -56,74 +56,70 @@ static const struct usb_device_id sn9c102_id_table[] = { { SN9C102_USB_DEVICE(0x0c45, 0x6029, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x602a, BRIDGE_SN9C102), }, #endif - { SN9C102_USB_DEVICE(0x0c45, 0x602b, BRIDGE_SN9C102), }, + { SN9C102_USB_DEVICE(0x0c45, 0x602b, BRIDGE_SN9C102), }, /* not in sonixb */ #if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x602c, BRIDGE_SN9C102), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), }, HV7131R */ { SN9C102_USB_DEVICE(0x0c45, 0x602e, BRIDGE_SN9C102), }, #endif - { SN9C102_USB_DEVICE(0x0c45, 0x6030, BRIDGE_SN9C102), }, + { SN9C102_USB_DEVICE(0x0c45, 0x6030, BRIDGE_SN9C102), }, /* not in sonixb */ /* SN9C103 */ - { SN9C102_USB_DEVICE(0x0c45, 0x6080, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x6082, BRIDGE_SN9C103), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x6080, BRIDGE_SN9C103), }, non existent ? */ + { SN9C102_USB_DEVICE(0x0c45, 0x6082, BRIDGE_SN9C103), }, /* not in sonixb */ /* { SN9C102_USB_DEVICE(0x0c45, 0x6083, BRIDGE_SN9C103), }, HY7131D/E */ - { SN9C102_USB_DEVICE(0x0c45, 0x6088, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x608a, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x608b, BRIDGE_SN9C103), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x6088, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x608a, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x608b, BRIDGE_SN9C103), }, non existent ? */ { SN9C102_USB_DEVICE(0x0c45, 0x608c, BRIDGE_SN9C103), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), }, CISVF10 */ #if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x608f, BRIDGE_SN9C103), }, #endif - { SN9C102_USB_DEVICE(0x0c45, 0x60a0, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60a2, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x60a0, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60a2, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), }, PAS106 */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), }, TAS5130 */ -/* { SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), }, TAS5130 */ - { SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), }, TAS5110, non existent */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), }, non existent ? */ { SN9C102_USB_DEVICE(0x0c45, 0x60af, BRIDGE_SN9C103), }, #if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x60b0, BRIDGE_SN9C103), }, #endif - { SN9C102_USB_DEVICE(0x0c45, 0x60b2, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60b3, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60b8, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60ba, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60bb, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60bc, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60be, BRIDGE_SN9C103), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x60b2, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60b3, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60b8, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60ba, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60bb, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60bc, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60be, BRIDGE_SN9C103), }, non existent ? */ /* SN9C105 */ #if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE { SN9C102_USB_DEVICE(0x045e, 0x00f5, BRIDGE_SN9C105), }, { SN9C102_USB_DEVICE(0x045e, 0x00f7, BRIDGE_SN9C105), }, { SN9C102_USB_DEVICE(0x0471, 0x0327, BRIDGE_SN9C105), }, { SN9C102_USB_DEVICE(0x0471, 0x0328, BRIDGE_SN9C105), }, -#endif { SN9C102_USB_DEVICE(0x0c45, 0x60c0, BRIDGE_SN9C105), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60c2, BRIDGE_SN9C105), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60c8, BRIDGE_SN9C105), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60cc, BRIDGE_SN9C105), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60ea, BRIDGE_SN9C105), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60ec, BRIDGE_SN9C105), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60ef, BRIDGE_SN9C105), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60fa, BRIDGE_SN9C105), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x60c2, BRIDGE_SN9C105), }, PO1030 */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60c8, BRIDGE_SN9C105), }, OM6801 */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60cc, BRIDGE_SN9C105), }, HV7131GP */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60ea, BRIDGE_SN9C105), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60ec, BRIDGE_SN9C105), }, MO4000 */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60ef, BRIDGE_SN9C105), }, ICM105C */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60fa, BRIDGE_SN9C105), }, OV7648 */ { SN9C102_USB_DEVICE(0x0c45, 0x60fb, BRIDGE_SN9C105), }, +#endif { SN9C102_USB_DEVICE(0x0c45, 0x60fc, BRIDGE_SN9C105), }, { SN9C102_USB_DEVICE(0x0c45, 0x60fe, BRIDGE_SN9C105), }, /* SN9C120 */ { SN9C102_USB_DEVICE(0x0458, 0x7025, BRIDGE_SN9C120), }, -#if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE - { SN9C102_USB_DEVICE(0x0c45, 0x6102, BRIDGE_SN9C120), }, -#endif - { SN9C102_USB_DEVICE(0x0c45, 0x6108, BRIDGE_SN9C120), }, - { SN9C102_USB_DEVICE(0x0c45, 0x610f, BRIDGE_SN9C120), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x6102, BRIDGE_SN9C120), }, po2030 */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x6108, BRIDGE_SN9C120), }, om6801 */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x610f, BRIDGE_SN9C120), }, S5K53BEB */ #if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x6130, BRIDGE_SN9C120), }, -#endif /* { SN9C102_USB_DEVICE(0x0c45, 0x6138, BRIDGE_SN9C120), }, MO8000 */ -#if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x613a, BRIDGE_SN9C120), }, #endif { SN9C102_USB_DEVICE(0x0c45, 0x613b, BRIDGE_SN9C120), }, -- cgit v1.2.1 From 0a76cb8cefbaf84465e0cd9a6a1da7f54981c8ef Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 5 Jan 2011 13:55:43 -0300 Subject: [media] gspca_sonixb: Refactor to unify bridge handling Refactor the code to unify how the sn9c101/102 and the sn9c103 bridge are handled. Also move code which is the same for all sensors from the per sensor init register settings to a central place. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 206 +++++++++++++++++++++---------------- 1 file changed, 116 insertions(+), 90 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 73504a3f87b7..43784027568f 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -23,8 +23,15 @@ /* Some documentation on known sonixb registers: Reg Use +sn9c101 / sn9c102: 0x10 high nibble red gain low nibble blue gain 0x11 low nibble green gain +sn9c103: +0x05 red gain 0-127 +0x06 blue gain 0-127 +0x07 green gain 0-127 +all: +0x08-0x0f i2c / 3wire registers 0x12 hstart 0x13 vstart 0x15 hsize (hsize = register-value * 16) @@ -88,12 +95,9 @@ struct sd { typedef const __u8 sensor_init_t[8]; struct sensor_data { - const __u8 *bridge_init[2]; - int bridge_init_size[2]; + const __u8 *bridge_init; sensor_init_t *sensor_init; int sensor_init_size; - sensor_init_t *sensor_bridge_init[2]; - int sensor_bridge_init_size[2]; int flags; unsigned ctrl_dis; __u8 sensor_addr; @@ -114,7 +118,6 @@ struct sensor_data { #define NO_FREQ (1 << FREQ_IDX) #define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX) -#define COMP2 0x8f #define COMP 0xc7 /* 0x87 //0x07 */ #define COMP1 0xc9 /* 0x89 //0x09 */ @@ -123,15 +126,11 @@ struct sensor_data { #define SYS_CLK 0x04 -#define SENS(bridge_1, bridge_3, sensor, sensor_1, \ - sensor_3, _flags, _ctrl_dis, _sensor_addr) \ +#define SENS(bridge, sensor, _flags, _ctrl_dis, _sensor_addr) \ { \ - .bridge_init = { bridge_1, bridge_3 }, \ - .bridge_init_size = { sizeof(bridge_1), sizeof(bridge_3) }, \ + .bridge_init = bridge, \ .sensor_init = sensor, \ .sensor_init_size = sizeof(sensor), \ - .sensor_bridge_init = { sensor_1, sensor_3,}, \ - .sensor_bridge_init_size = { sizeof(sensor_1), sizeof(sensor_3)}, \ .flags = _flags, .ctrl_dis = _ctrl_dis, .sensor_addr = _sensor_addr \ } @@ -311,7 +310,6 @@ static const __u8 initHv7131d[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x00, 0x28, 0x1e, 0x60, 0x8e, 0x42, - 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c }; static const __u8 hv7131d_sensor_init[][8] = { {0xa0, 0x11, 0x01, 0x04, 0x00, 0x00, 0x00, 0x17}, @@ -326,7 +324,6 @@ static const __u8 initHv7131r[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x01, 0x00, 0x28, 0x1e, 0x60, 0x8a, 0x20, - 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c }; static const __u8 hv7131r_sensor_init[][8] = { {0xc0, 0x11, 0x31, 0x38, 0x2a, 0x2e, 0x00, 0x10}, @@ -339,7 +336,7 @@ static const __u8 initOv6650[] = { 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b, - 0x10, 0x1d, 0x10, 0x02, 0x02, 0x09, 0x07 + 0x10, }; static const __u8 ov6650_sensor_init[][8] = { /* Bright, contrast, etc are set through SCBB interface. @@ -378,18 +375,7 @@ static const __u8 initOv7630[] = { 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r09 .. r10 */ 0x00, 0x01, 0x01, 0x0a, /* r11 .. r14 */ 0x28, 0x1e, /* H & V sizes r15 .. r16 */ - 0x68, COMP2, MCK_INIT1, /* r17 .. r19 */ - 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c /* r1a .. r1f */ -}; -static const __u8 initOv7630_3[] = { - 0x44, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, 0x80, /* r01 .. r08 */ - 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r09 .. r10 */ - 0x00, 0x02, 0x01, 0x0a, /* r11 .. r14 */ - 0x28, 0x1e, /* H & V sizes r15 .. r16 */ 0x68, 0x8f, MCK_INIT1, /* r17 .. r19 */ - 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c, 0x00, /* r1a .. r20 */ - 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70, 0x80, /* r21 .. r28 */ - 0x90, 0xa0, 0xb0, 0xc0, 0xd0, 0xe0, 0xf0, 0xff /* r29 .. r30 */ }; static const __u8 ov7630_sensor_init[][8] = { {0xa0, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, @@ -413,16 +399,11 @@ static const __u8 ov7630_sensor_init[][8] = { {0xd0, 0x21, 0x17, 0x1c, 0xbd, 0x06, 0xf6, 0x10}, }; -static const __u8 ov7630_sensor_init_3[][8] = { - {0xa0, 0x21, 0x13, 0x80, 0x00, 0x00, 0x00, 0x10}, -}; - static const __u8 initPas106[] = { 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x01, 0x00, 0x16, 0x12, 0x24, COMP1, MCK_INIT1, - 0x18, 0x10, 0x02, 0x02, 0x09, 0x07 }; /* compression 0x86 mckinit1 0x2b */ @@ -496,7 +477,6 @@ static const __u8 initPas202[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x03, 0x0a, 0x28, 0x1e, 0x20, 0x89, 0x20, - 0x00, 0x00, 0x02, 0x03, 0x0f, 0x0c }; /* "Known" PAS202BCB registers: @@ -537,7 +517,6 @@ static const __u8 initTas5110c[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x45, 0x09, 0x0a, 0x16, 0x12, 0x60, 0x86, 0x2b, - 0x14, 0x0a, 0x02, 0x02, 0x09, 0x07 }; /* Same as above, except a different hstart */ static const __u8 initTas5110d[] = { @@ -545,7 +524,6 @@ static const __u8 initTas5110d[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x09, 0x0a, 0x16, 0x12, 0x60, 0x86, 0x2b, - 0x14, 0x0a, 0x02, 0x02, 0x09, 0x07 }; static const __u8 tas5110_sensor_init[][8] = { {0x30, 0x11, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x10}, @@ -558,7 +536,6 @@ static const __u8 initTas5130[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x68, 0x0c, 0x0a, 0x28, 0x1e, 0x60, COMP, MCK_INIT, - 0x18, 0x10, 0x04, 0x03, 0x11, 0x0c }; static const __u8 tas5130_sensor_init[][8] = { /* {0x30, 0x11, 0x00, 0x40, 0x47, 0x00, 0x00, 0x10}, @@ -569,21 +546,17 @@ static const __u8 tas5130_sensor_init[][8] = { }; static struct sensor_data sensor_data[] = { -SENS(initHv7131d, NULL, hv7131d_sensor_init, NULL, NULL, F_GAIN, NO_BRIGHTNESS|NO_FREQ, 0), -SENS(initHv7131r, NULL, hv7131r_sensor_init, NULL, NULL, 0, NO_BRIGHTNESS|NO_EXPO|NO_FREQ, 0), -SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60), -SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3, - F_GAIN, 0, 0x21), -SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_GAIN|F_SIF, NO_FREQ, - 0), -SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, F_GAIN, - NO_FREQ, 0), -SENS(initTas5110c, NULL, tas5110_sensor_init, NULL, NULL, - F_GAIN|F_SIF|F_COARSE_EXPO, NO_BRIGHTNESS|NO_FREQ, 0), -SENS(initTas5110d, NULL, tas5110_sensor_init, NULL, NULL, - F_GAIN|F_SIF|F_COARSE_EXPO, NO_BRIGHTNESS|NO_FREQ, 0), -SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, - 0), +SENS(initHv7131d, hv7131d_sensor_init, F_GAIN, NO_BRIGHTNESS|NO_FREQ, 0), +SENS(initHv7131r, hv7131r_sensor_init, 0, NO_BRIGHTNESS|NO_EXPO|NO_FREQ, 0), +SENS(initOv6650, ov6650_sensor_init, F_GAIN|F_SIF, 0, 0x60), +SENS(initOv7630, ov7630_sensor_init, F_GAIN, 0, 0x21), +SENS(initPas106, pas106_sensor_init, F_GAIN|F_SIF, NO_FREQ, 0), +SENS(initPas202, pas202_sensor_init, F_GAIN, NO_FREQ, 0), +SENS(initTas5110c, tas5110_sensor_init, F_GAIN|F_SIF|F_COARSE_EXPO, + NO_BRIGHTNESS|NO_FREQ, 0), +SENS(initTas5110d, tas5110_sensor_init, F_GAIN|F_SIF|F_COARSE_EXPO, + NO_BRIGHTNESS|NO_FREQ, 0), +SENS(initTas5130, tas5130_sensor_init, 0, NO_EXPO|NO_FREQ, 0), }; /* get one byte in gspca_dev->usb_buf */ @@ -796,7 +769,7 @@ static void setgain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; __u8 gain; - __u8 buf[2] = { 0, 0 }; + __u8 buf[3] = { 0, 0, 0 }; if (sensor_data[sd->sensor].flags & F_GAIN) { /* Use the sensor gain to do the actual gain */ @@ -804,13 +777,18 @@ static void setgain(struct gspca_dev *gspca_dev) return; } - gain = sd->gain >> 4; - - /* red and blue gain */ - buf[0] = gain << 4 | gain; - /* green gain */ - buf[1] = gain; - reg_w(gspca_dev, 0x10, buf, 2); + if (sd->bridge == BRIDGE_103) { + gain = sd->gain >> 1; + buf[0] = gain; /* Red */ + buf[1] = gain; /* Green */ + buf[2] = gain; /* Blue */ + reg_w(gspca_dev, 0x05, buf, 3); + } else { + gain = sd->gain >> 4; + buf[0] = gain << 4 | gain; /* Red and blue */ + buf[1] = gain; /* Green */ + reg_w(gspca_dev, 0x10, buf, 2); + } } static void setexposure(struct gspca_dev *gspca_dev) @@ -1127,53 +1105,91 @@ static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; struct cam *cam = &gspca_dev->cam; - int mode, l; - const __u8 *sn9c10x; - __u8 reg12_19[8]; + int i, mode; + __u8 regs[0x31]; mode = cam->cam_mode[gspca_dev->curr_mode].priv & 0x07; - sn9c10x = sensor_data[sd->sensor].bridge_init[sd->bridge]; - l = sensor_data[sd->sensor].bridge_init_size[sd->bridge]; - memcpy(reg12_19, &sn9c10x[0x12 - 1], 8); - reg12_19[6] = sn9c10x[0x18 - 1] | (mode << 4); - /* Special cases where reg 17 and or 19 value depends on mode */ + /* Copy registers 0x01 - 0x19 from the template */ + memcpy(®s[0x01], sensor_data[sd->sensor].bridge_init, 0x19); + /* Set the mode */ + regs[0x18] |= mode << 4; + + /* Set bridge gain to 1.0 */ + if (sd->bridge == BRIDGE_103) { + regs[0x05] = 0x20; /* Red */ + regs[0x06] = 0x20; /* Green */ + regs[0x07] = 0x20; /* Blue */ + } else { + regs[0x10] = 0x00; /* Red and blue */ + regs[0x11] = 0x00; /* Green */ + } + + /* Setup pixel numbers and auto exposure window */ + if (sensor_data[sd->sensor].flags & F_SIF) { + regs[0x1a] = 0x14; /* HO_SIZE 640, makes no sense */ + regs[0x1b] = 0x0a; /* VO_SIZE 320, makes no sense */ + regs[0x1c] = 0x02; /* AE H-start 64 */ + regs[0x1d] = 0x02; /* AE V-start 64 */ + regs[0x1e] = 0x09; /* AE H-end 288 */ + regs[0x1f] = 0x07; /* AE V-end 224 */ + } else { + regs[0x1a] = 0x1d; /* HO_SIZE 960, makes no sense */ + regs[0x1b] = 0x10; /* VO_SIZE 512, makes no sense */ + regs[0x1c] = 0x02; /* AE H-start 64 */ + regs[0x1d] = 0x03; /* AE V-start 96 */ + regs[0x1e] = 0x0f; /* AE H-end 480 */ + regs[0x1f] = 0x0c; /* AE V-end 384 */ + } + + /* Setup the gamma table (only used with the sn9c103 bridge) */ + for (i = 0; i < 16; i++) + regs[0x20 + i] = i * 16; + regs[0x20 + i] = 255; + + /* Special cases where some regs depend on mode or bridge */ switch (sd->sensor) { case SENSOR_TAS5130CXX: - /* probably not mode specific at all most likely the upper + /* FIXME / TESTME + probably not mode specific at all most likely the upper nibble of 0x19 is exposure (clock divider) just as with the tas5110, we need someone to test this. */ - reg12_19[7] = mode ? 0x23 : 0x43; + regs[0x19] = mode ? 0x23 : 0x43; break; + case SENSOR_OV7630: + /* FIXME / TESTME for some reason with the 101/102 bridge the + clock is set to 12 Mhz (reg1 == 0x04), rather then 24. + Also the hstart needs to go from 1 to 2 when using a 103, + which is likely related. This does not seem right. */ + if (sd->bridge == BRIDGE_103) { + regs[0x01] = 0x44; /* Select 24 Mhz clock */ + regs[0x12] = 0x02; /* Set hstart to 2 */ + } } /* Disable compression when the raw bayer format has been selected */ if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) - reg12_19[6] &= ~0x80; + regs[0x18] &= ~0x80; /* Vga mode emulation on SIF sensor? */ if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_REDUCED_SIF) { - reg12_19[0] += 16; /* 0x12: hstart adjust */ - reg12_19[1] += 24; /* 0x13: vstart adjust */ - reg12_19[3] = 320 / 16; /* 0x15: hsize */ - reg12_19[4] = 240 / 16; /* 0x16: vsize */ + regs[0x12] += 16; /* hstart adjust */ + regs[0x13] += 24; /* vstart adjust */ + regs[0x15] = 320 / 16; /* hsize */ + regs[0x16] = 240 / 16; /* vsize */ } /* reg 0x01 bit 2 video transfert on */ - reg_w(gspca_dev, 0x01, &sn9c10x[0x01 - 1], 1); + reg_w(gspca_dev, 0x01, ®s[0x01], 1); /* reg 0x17 SensorClk enable inv Clk 0x60 */ - reg_w(gspca_dev, 0x17, &sn9c10x[0x17 - 1], 1); + reg_w(gspca_dev, 0x17, ®s[0x17], 1); /* Set the registers from the template */ - reg_w(gspca_dev, 0x01, sn9c10x, l); + reg_w(gspca_dev, 0x01, ®s[0x01], + (sd->bridge == BRIDGE_103) ? 0x30 : 0x1f); /* Init the sensor */ i2c_w_vector(gspca_dev, sensor_data[sd->sensor].sensor_init, sensor_data[sd->sensor].sensor_init_size); - if (sensor_data[sd->sensor].sensor_bridge_init[sd->bridge]) - i2c_w_vector(gspca_dev, - sensor_data[sd->sensor].sensor_bridge_init[sd->bridge], - sensor_data[sd->sensor].sensor_bridge_init_size[ - sd->bridge]); - /* Mode specific sensor setup */ + /* Mode / bridge specific sensor setup */ switch (sd->sensor) { case SENSOR_PAS202: { const __u8 i2cpclockdiv[] = @@ -1181,27 +1197,37 @@ static int sd_start(struct gspca_dev *gspca_dev) /* clockdiv from 4 to 3 (7.5 -> 10 fps) when in low res mode */ if (mode) i2c_w(gspca_dev, i2cpclockdiv); + break; } + case SENSOR_OV7630: + /* FIXME / TESTME We should be able to handle this identical + for the 101/102 and the 103 case */ + if (sd->bridge == BRIDGE_103) { + const __u8 i2c[] = { 0xa0, 0x21, 0x13, + 0x80, 0x00, 0x00, 0x00, 0x10 }; + i2c_w(gspca_dev, i2c); + } + break; } /* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */ - reg_w(gspca_dev, 0x15, ®12_19[3], 2); + reg_w(gspca_dev, 0x15, ®s[0x15], 2); /* compression register */ - reg_w(gspca_dev, 0x18, ®12_19[6], 1); + reg_w(gspca_dev, 0x18, ®s[0x18], 1); /* H_start */ - reg_w(gspca_dev, 0x12, ®12_19[0], 1); + reg_w(gspca_dev, 0x12, ®s[0x12], 1); /* V_START */ - reg_w(gspca_dev, 0x13, ®12_19[1], 1); + reg_w(gspca_dev, 0x13, ®s[0x13], 1); /* reset 0x17 SensorClk enable inv Clk 0x60 */ /*fixme: ov7630 [17]=68 8f (+20 if 102)*/ - reg_w(gspca_dev, 0x17, ®12_19[5], 1); + reg_w(gspca_dev, 0x17, ®s[0x17], 1); /*MCKSIZE ->3 */ /*fixme: not ov7630*/ - reg_w(gspca_dev, 0x19, ®12_19[7], 1); + reg_w(gspca_dev, 0x19, ®s[0x19], 1); /* AE_STRX AE_STRY AE_ENDX AE_ENDY */ - reg_w(gspca_dev, 0x1c, &sn9c10x[0x1c - 1], 4); + reg_w(gspca_dev, 0x1c, ®s[0x1c], 4); /* Enable video transfert */ - reg_w(gspca_dev, 0x01, &sn9c10x[0], 1); + reg_w(gspca_dev, 0x01, ®s[0x01], 1); /* Compression */ - reg_w(gspca_dev, 0x18, ®12_19[6], 2); + reg_w(gspca_dev, 0x18, ®s[0x18], 2); msleep(20); sd->reg11 = -1; -- cgit v1.2.1 From f913c001cd6084db0e3486b832234d2fe4513ff6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 5 Jan 2011 16:01:16 -0300 Subject: [media] gspca_sonixb: Adjust autoexposure window for vga cams so that it is centered Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 43784027568f..e88097f3d7ed 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -1027,7 +1027,7 @@ static void do_autogain(struct gspca_dev *gspca_dev) desired_avg_lum = 5000; } else { deadzone = 1500; - desired_avg_lum = 18000; + desired_avg_lum = 13000; } if (sensor_data[sd->sensor].flags & F_COARSE_EXPO) @@ -1135,7 +1135,7 @@ static int sd_start(struct gspca_dev *gspca_dev) } else { regs[0x1a] = 0x1d; /* HO_SIZE 960, makes no sense */ regs[0x1b] = 0x10; /* VO_SIZE 512, makes no sense */ - regs[0x1c] = 0x02; /* AE H-start 64 */ + regs[0x1c] = 0x05; /* AE H-start 160 */ regs[0x1d] = 0x03; /* AE V-start 96 */ regs[0x1e] = 0x0f; /* AE H-end 480 */ regs[0x1f] = 0x0c; /* AE V-end 384 */ -- cgit v1.2.1 From 0d0d7ef71ec6ba6abb680478f7d0514584b8277f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 6 Jan 2011 07:55:20 -0300 Subject: [media] gspca_sonixb: Fix TAS5110D sensor gain control Also fix the issue of the image being mirrored. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 36 ++++++++++++++++++++++++++++++------ 1 file changed, 30 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index e88097f3d7ed..5c8420e5c02e 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -525,10 +525,18 @@ static const __u8 initTas5110d[] = { 0x00, 0x00, 0x00, 0x41, 0x09, 0x0a, 0x16, 0x12, 0x60, 0x86, 0x2b, }; -static const __u8 tas5110_sensor_init[][8] = { +/* tas5110c is 3 wire, tas5110d is 2 wire (regular i2c) */ +static const __u8 tas5110c_sensor_init[][8] = { {0x30, 0x11, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x10}, {0x30, 0x11, 0x02, 0x20, 0xa9, 0x00, 0x00, 0x10}, - {0xa0, 0x61, 0x9a, 0xca, 0x00, 0x00, 0x00, 0x17}, +}; +/* Known TAS5110D registers + * reg02: gain, bit order reversed!! 0 == max gain, 255 == min gain + * reg03: bit3: vflip, bit4: ~hflip, bit7: ~gainboost (~ == inverted) + * Note: writing reg03 seems to only work when written together with 02 + */ +static const __u8 tas5110d_sensor_init[][8] = { + {0xa0, 0x61, 0x9a, 0xca, 0x00, 0x00, 0x00, 0x17}, /* reset */ }; static const __u8 initTas5130[] = { @@ -552,9 +560,9 @@ SENS(initOv6650, ov6650_sensor_init, F_GAIN|F_SIF, 0, 0x60), SENS(initOv7630, ov7630_sensor_init, F_GAIN, 0, 0x21), SENS(initPas106, pas106_sensor_init, F_GAIN|F_SIF, NO_FREQ, 0), SENS(initPas202, pas202_sensor_init, F_GAIN, NO_FREQ, 0), -SENS(initTas5110c, tas5110_sensor_init, F_GAIN|F_SIF|F_COARSE_EXPO, +SENS(initTas5110c, tas5110c_sensor_init, F_GAIN|F_SIF|F_COARSE_EXPO, NO_BRIGHTNESS|NO_FREQ, 0), -SENS(initTas5110d, tas5110_sensor_init, F_GAIN|F_SIF|F_COARSE_EXPO, +SENS(initTas5110d, tas5110d_sensor_init, F_GAIN|F_SIF|F_COARSE_EXPO, NO_BRIGHTNESS|NO_FREQ, 0), SENS(initTas5130, tas5130_sensor_init, 0, NO_EXPO|NO_FREQ, 0), }; @@ -705,8 +713,7 @@ static void setsensorgain(struct gspca_dev *gspca_dev) goto err; break; } - case SENSOR_TAS5110C: - case SENSOR_TAS5110D: { + case SENSOR_TAS5110C: { __u8 i2c[] = {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10}; @@ -715,6 +722,23 @@ static void setsensorgain(struct gspca_dev *gspca_dev) goto err; break; } + case SENSOR_TAS5110D: { + __u8 i2c[] = { + 0xb0, 0x61, 0x02, 0x00, 0x10, 0x00, 0x00, 0x17 }; + gain = 255 - gain; + /* The bits in the register are the wrong way around!! */ + i2c[3] |= (gain & 0x80) >> 7; + i2c[3] |= (gain & 0x40) >> 5; + i2c[3] |= (gain & 0x20) >> 3; + i2c[3] |= (gain & 0x10) >> 1; + i2c[3] |= (gain & 0x08) << 1; + i2c[3] |= (gain & 0x04) << 3; + i2c[3] |= (gain & 0x02) << 5; + i2c[3] |= (gain & 0x01) << 7; + if (i2c_w(gspca_dev, i2c) < 0) + goto err; + break; + } case SENSOR_OV6650: gain >>= 1; -- cgit v1.2.1 From 4e17cd2eac2544267bdfab67655be468f80f50c6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 6 Jan 2011 10:58:53 -0300 Subject: [media] gspca_sonixb: TAS5130C brightness control really is a gain control Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 5c8420e5c02e..36253417bde4 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -564,7 +564,8 @@ SENS(initTas5110c, tas5110c_sensor_init, F_GAIN|F_SIF|F_COARSE_EXPO, NO_BRIGHTNESS|NO_FREQ, 0), SENS(initTas5110d, tas5110d_sensor_init, F_GAIN|F_SIF|F_COARSE_EXPO, NO_BRIGHTNESS|NO_FREQ, 0), -SENS(initTas5130, tas5130_sensor_init, 0, NO_EXPO|NO_FREQ, 0), +SENS(initTas5130, tas5130_sensor_init, F_GAIN, + NO_BRIGHTNESS|NO_EXPO|NO_FREQ, 0), }; /* get one byte in gspca_dev->usb_buf */ @@ -636,7 +637,6 @@ static void i2c_w_vector(struct gspca_dev *gspca_dev, static void setbrightness(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - __u8 value; switch (sd->sensor) { case SENSOR_OV6650: @@ -678,17 +678,6 @@ static void setbrightness(struct gspca_dev *gspca_dev) goto err; break; } - case SENSOR_TAS5130CXX: { - __u8 i2c[] = - {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10}; - - value = 0xff - sd->brightness; - i2c[4] = value; - PDEBUG(D_CONF, "brightness %d : %d", value, i2c[4]); - if (i2c_w(gspca_dev, i2c) < 0) - goto err; - break; - } } return; err: @@ -713,7 +702,8 @@ static void setsensorgain(struct gspca_dev *gspca_dev) goto err; break; } - case SENSOR_TAS5110C: { + case SENSOR_TAS5110C: + case SENSOR_TAS5130CXX: { __u8 i2c[] = {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10}; -- cgit v1.2.1 From 69ffd2545766742f7d247770c6ee30a6ed6058ef Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 6 Jan 2011 11:56:30 -0300 Subject: [media] gspca_sonixb: Add usb ids for known sn9c103 cameras Now that our bridge code is unified for sn9c101/102 and sn9c103 models, the sn9c103 models should simply work, given that the only difference in the sn9c103 is audio support and a gamma correction table. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 12 ++++++++---- drivers/media/video/sn9c102/sn9c102_devtable.h | 8 +++----- 2 files changed, 11 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 36253417bde4..c20131147604 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -1572,8 +1572,8 @@ static const struct usb_device_id device_table[] __devinitconst = { {USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)}, {USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)}, {USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)}, -#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x6019), SB(OV7630, 101)}, +#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x6024), SB(TAS5130CXX, 102)}, {USB_DEVICE(0x0c45, 0x6025), SB(TAS5130CXX, 102)}, #endif @@ -1584,11 +1584,15 @@ static const struct usb_device_id device_table[] __devinitconst = { {USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)}, {USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)}, {USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)}, - /* {USB_DEVICE(0x0c45, 0x602b), SB(MI03XX, 102)}, */ /* MI0343 MI0360 MI0330 */ + /* {USB_DEVICE(0x0c45, 0x6030), SB(MI03XX, 102)}, */ /* MI0343 MI0360 MI0330 */ + /* {USB_DEVICE(0x0c45, 0x6082), SB(MI03XX, 103)}, */ /* MI0343 MI0360 */ + {USB_DEVICE(0x0c45, 0x6083), SB(HV7131D, 103)}, + {USB_DEVICE(0x0c45, 0x608c), SB(HV7131R, 103)}, + /* {USB_DEVICE(0x0c45, 0x608e), SB(CISVF10, 103)}, */ {USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)}, -#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE + {USB_DEVICE(0x0c45, 0x60a8), SB(PAS106, 103)}, + {USB_DEVICE(0x0c45, 0x60aa), SB(TAS5130CXX, 103)}, {USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)}, -#endif {USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)}, {} }; diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h index 74bc719b8e89..0e0fcc017fb8 100644 --- a/drivers/media/video/sn9c102/sn9c102_devtable.h +++ b/drivers/media/video/sn9c102/sn9c102_devtable.h @@ -47,8 +47,8 @@ static const struct usb_device_id sn9c102_id_table[] = { { SN9C102_USB_DEVICE(0x0c45, 0x6009, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x600d, BRIDGE_SN9C102), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x6011, BRIDGE_SN9C102), }, OV6650 */ -#endif { SN9C102_USB_DEVICE(0x0c45, 0x6019, BRIDGE_SN9C102), }, +#endif { SN9C102_USB_DEVICE(0x0c45, 0x6024, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x6025, BRIDGE_SN9C102), }, #if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE @@ -66,15 +66,14 @@ static const struct usb_device_id sn9c102_id_table[] = { /* SN9C103 */ /* { SN9C102_USB_DEVICE(0x0c45, 0x6080, BRIDGE_SN9C103), }, non existent ? */ { SN9C102_USB_DEVICE(0x0c45, 0x6082, BRIDGE_SN9C103), }, /* not in sonixb */ +#if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE /* { SN9C102_USB_DEVICE(0x0c45, 0x6083, BRIDGE_SN9C103), }, HY7131D/E */ /* { SN9C102_USB_DEVICE(0x0c45, 0x6088, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x608a, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x608b, BRIDGE_SN9C103), }, non existent ? */ { SN9C102_USB_DEVICE(0x0c45, 0x608c, BRIDGE_SN9C103), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), }, CISVF10 */ -#if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x608f, BRIDGE_SN9C103), }, -#endif /* { SN9C102_USB_DEVICE(0x0c45, 0x60a0, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60a2, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), }, non existent ? */ @@ -84,9 +83,7 @@ static const struct usb_device_id sn9c102_id_table[] = { /* { SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), }, non existent ? */ { SN9C102_USB_DEVICE(0x0c45, 0x60af, BRIDGE_SN9C103), }, -#if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x60b0, BRIDGE_SN9C103), }, -#endif /* { SN9C102_USB_DEVICE(0x0c45, 0x60b2, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60b3, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60b8, BRIDGE_SN9C103), }, non existent ? */ @@ -94,6 +91,7 @@ static const struct usb_device_id sn9c102_id_table[] = { /* { SN9C102_USB_DEVICE(0x0c45, 0x60bb, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60bc, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60be, BRIDGE_SN9C103), }, non existent ? */ +#endif /* SN9C105 */ #if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE { SN9C102_USB_DEVICE(0x045e, 0x00f5, BRIDGE_SN9C105), }, -- cgit v1.2.1 From 4944e27d85ed8e5ccd591687546d56d111c5cc98 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 6 Jan 2011 13:05:29 -0300 Subject: [media] gspca_sonixj: Enable more usb ids when sn9c102 gets compiled too Both we and the windows driver make no sensor specific differences (with some exceptions) for different sonixj bridge types. Thus if a sn9c105 bridge has been successfully tested with a sensor, the same sensor can be successfully used with a sn9c120 bridge too. Using this knowledge we can move over most usb-ids too the sonixj driver when both are compiled. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 6 +----- drivers/media/video/sn9c102/sn9c102_devtable.h | 6 ++---- 2 files changed, 3 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 2d0bb17a30a2..85716f864cfb 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -2908,10 +2908,8 @@ static const struct sd_desc sd_desc = { | (SENSOR_ ## sensor << 8) \ | (flags) static const __devinitdata struct usb_device_id device_table[] = { -#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)}, {USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)}, -#endif {USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, PDN_INV)}, {USB_DEVICE(0x045e, 0x00f7), BSF(SN9C105, OV7660, PDN_INV)}, {USB_DEVICE(0x0471, 0x0327), BS(SN9C105, MI0360)}, @@ -2936,8 +2934,8 @@ static const __devinitdata struct usb_device_id device_table[] = { /* {USB_DEVICE(0x0c45, 0x60fa), BS(SN9C105, OV7648)}, */ /* {USB_DEVICE(0x0c45, 0x60f2), BS(SN9C105, OV7660)}, */ {USB_DEVICE(0x0c45, 0x60fb), BS(SN9C105, OV7660)}, -#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x60fc), BS(SN9C105, HV7131R)}, +#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x60fe), BS(SN9C105, OV7630)}, #endif {USB_DEVICE(0x0c45, 0x6100), BS(SN9C120, MI0360)}, /*sn9c128*/ @@ -2962,9 +2960,7 @@ static const __devinitdata struct usb_device_id device_table[] = { /* {USB_DEVICE(0x0c45, 0x6132), BS(SN9C120, OV7670)}, */ {USB_DEVICE(0x0c45, 0x6138), BS(SN9C120, MO4000)}, {USB_DEVICE(0x0c45, 0x613a), BS(SN9C120, OV7648)}, -#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x613b), BS(SN9C120, OV7660)}, -#endif {USB_DEVICE(0x0c45, 0x613c), BS(SN9C120, HV7131R)}, {USB_DEVICE(0x0c45, 0x613e), BS(SN9C120, OV7630)}, {USB_DEVICE(0x0c45, 0x6142), BS(SN9C120, PO2030N)}, /*sn9c120b*/ diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h index 0e0fcc017fb8..97e123672d65 100644 --- a/drivers/media/video/sn9c102/sn9c102_devtable.h +++ b/drivers/media/video/sn9c102/sn9c102_devtable.h @@ -107,21 +107,19 @@ static const struct usb_device_id sn9c102_id_table[] = { /* { SN9C102_USB_DEVICE(0x0c45, 0x60ef, BRIDGE_SN9C105), }, ICM105C */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60fa, BRIDGE_SN9C105), }, OV7648 */ { SN9C102_USB_DEVICE(0x0c45, 0x60fb, BRIDGE_SN9C105), }, -#endif { SN9C102_USB_DEVICE(0x0c45, 0x60fc, BRIDGE_SN9C105), }, +#endif { SN9C102_USB_DEVICE(0x0c45, 0x60fe, BRIDGE_SN9C105), }, /* SN9C120 */ +#if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE { SN9C102_USB_DEVICE(0x0458, 0x7025, BRIDGE_SN9C120), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x6102, BRIDGE_SN9C120), }, po2030 */ /* { SN9C102_USB_DEVICE(0x0c45, 0x6108, BRIDGE_SN9C120), }, om6801 */ /* { SN9C102_USB_DEVICE(0x0c45, 0x610f, BRIDGE_SN9C120), }, S5K53BEB */ -#if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x6130, BRIDGE_SN9C120), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x6138, BRIDGE_SN9C120), }, MO8000 */ { SN9C102_USB_DEVICE(0x0c45, 0x613a, BRIDGE_SN9C120), }, -#endif { SN9C102_USB_DEVICE(0x0c45, 0x613b, BRIDGE_SN9C120), }, -#if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x613c, BRIDGE_SN9C120), }, { SN9C102_USB_DEVICE(0x0c45, 0x613e, BRIDGE_SN9C120), }, #endif -- cgit v1.2.1 From e530a5e3cfe5f2dca35552d2d968f0a3fc115968 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 6 Jan 2011 15:23:55 -0300 Subject: [media] gspca_sonixj: Probe sensor type independent of bridge type Looking at the windows inf file, for usb ids with a sensor type where probing is needed to determine the type (for example ov7630 or soi768), this is needed for all bridge variants with a usb id indicating this sensor type. So do the probing to determine the actual sensor type for types where the usb-id info is not 100% deterministic, independent of the bridge type. If you look through the list of currently active usb ids in sonixj, this effectively only changes the code path for 0c45:60fe (sn9c105 + ov7630) and 0c45:612e (sn9c110 + ov7630), which according to the inf file can have a soi768 instead of a ov7630 just like the sn9c120 + ov7630 models where we already probe for a soi7630. The main reason for this code change is to keep the code paths as bridge variant independent as possible, so that we don't need a lot of special per bridge cases, as we enable more usb-ids in the future. This change makes the 0c45:60fe code path identical to the successfully tested 0c45:613e, so also make sonixj the default driver for 0c45:60fe. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 58 +++++++++++++------------- drivers/media/video/sn9c102/sn9c102_devtable.h | 2 - 2 files changed, 29 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 85716f864cfb..efe3fc7b6b74 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -1822,44 +1822,46 @@ static int sd_init(struct gspca_dev *gspca_dev) PDEBUG(D_PROBE, "Sonix chip id: %02x", regF1); switch (sd->bridge) { case BRIDGE_SN9C102P: + case BRIDGE_SN9C105: if (regF1 != 0x11) return -ENODEV; + break; + default: +/* case BRIDGE_SN9C110: */ +/* case BRIDGE_SN9C120: */ + if (regF1 != 0x12) + return -ENODEV; + } + + switch (sd->sensor) { + case SENSOR_MI0360: + mi0360_probe(gspca_dev); + break; + case SENSOR_OV7630: + ov7630_probe(gspca_dev); + break; + case SENSOR_OV7648: + ov7648_probe(gspca_dev); + break; + case SENSOR_PO2030N: + po2030n_probe(gspca_dev); + break; + } + + switch (sd->bridge) { + case BRIDGE_SN9C102P: reg_w1(gspca_dev, 0x02, regGpio[1]); break; case BRIDGE_SN9C105: - if (regF1 != 0x11) - return -ENODEV; - if (sd->sensor == SENSOR_MI0360) - mi0360_probe(gspca_dev); reg_w(gspca_dev, 0x01, regGpio, 2); break; + case BRIDGE_SN9C110: + reg_w1(gspca_dev, 0x02, 0x62); + break; case BRIDGE_SN9C120: - if (regF1 != 0x12) - return -ENODEV; - switch (sd->sensor) { - case SENSOR_MI0360: - mi0360_probe(gspca_dev); - break; - case SENSOR_OV7630: - ov7630_probe(gspca_dev); - break; - case SENSOR_OV7648: - ov7648_probe(gspca_dev); - break; - case SENSOR_PO2030N: - po2030n_probe(gspca_dev); - break; - } regGpio[1] = 0x70; /* no audio */ reg_w(gspca_dev, 0x01, regGpio, 2); break; - default: -/* case BRIDGE_SN9C110: */ -/* case BRIDGE_SN9C325: */ - if (regF1 != 0x12) - return -ENODEV; - reg_w1(gspca_dev, 0x02, 0x62); - break; } if (sd->sensor == SENSOR_OM6802) @@ -2935,9 +2937,7 @@ static const __devinitdata struct usb_device_id device_table[] = { /* {USB_DEVICE(0x0c45, 0x60f2), BS(SN9C105, OV7660)}, */ {USB_DEVICE(0x0c45, 0x60fb), BS(SN9C105, OV7660)}, {USB_DEVICE(0x0c45, 0x60fc), BS(SN9C105, HV7131R)}, -#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x60fe), BS(SN9C105, OV7630)}, -#endif {USB_DEVICE(0x0c45, 0x6100), BS(SN9C120, MI0360)}, /*sn9c128*/ {USB_DEVICE(0x0c45, 0x6102), BS(SN9C120, PO2030N)}, /* /GC0305*/ /* {USB_DEVICE(0x0c45, 0x6108), BS(SN9C120, OM6802)}, */ diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h index 97e123672d65..b3d2cc729657 100644 --- a/drivers/media/video/sn9c102/sn9c102_devtable.h +++ b/drivers/media/video/sn9c102/sn9c102_devtable.h @@ -108,10 +108,8 @@ static const struct usb_device_id sn9c102_id_table[] = { /* { SN9C102_USB_DEVICE(0x0c45, 0x60fa, BRIDGE_SN9C105), }, OV7648 */ { SN9C102_USB_DEVICE(0x0c45, 0x60fb, BRIDGE_SN9C105), }, { SN9C102_USB_DEVICE(0x0c45, 0x60fc, BRIDGE_SN9C105), }, -#endif { SN9C102_USB_DEVICE(0x0c45, 0x60fe, BRIDGE_SN9C105), }, /* SN9C120 */ -#if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE { SN9C102_USB_DEVICE(0x0458, 0x7025, BRIDGE_SN9C120), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x6102, BRIDGE_SN9C120), }, po2030 */ /* { SN9C102_USB_DEVICE(0x0c45, 0x6108, BRIDGE_SN9C120), }, om6801 */ -- cgit v1.2.1 From e48d38f7f100f37edc873df1b3a1d15ee3575874 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 6 Jan 2011 16:21:57 -0300 Subject: [media] gspca_sonixj: Add one more commented out usb-id While going through windows inf file I found more usb-id, add a comment with this id for future reference. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index efe3fc7b6b74..db35391d00e6 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -2968,6 +2968,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x6143), BS(SN9C120, SP80708)}, /*sn9c120b*/ {USB_DEVICE(0x0c45, 0x6148), BS(SN9C120, OM6802)}, /*sn9c120b*/ {USB_DEVICE(0x0c45, 0x614a), BS(SN9C120, ADCM1700)}, /*sn9c120b*/ +/* {USB_DEVICE(0x0c45, 0x614c), BS(SN9C120, GC0306)}, */ /*sn9c120b*/ {} }; MODULE_DEVICE_TABLE(usb, device_table); -- cgit v1.2.1 From 4c775902252b06673cf26a33834842f1fec3fe3e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 7 Jan 2011 07:29:24 -0300 Subject: [media] gspca_sonixb: Fix mirrored image with ov7630 Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index c20131147604..e45d1cfb4461 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -381,7 +381,7 @@ static const __u8 ov7630_sensor_init[][8] = { {0xa0, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, {0xb0, 0x21, 0x01, 0x77, 0x3a, 0x00, 0x00, 0x10}, /* {0xd0, 0x21, 0x12, 0x7c, 0x01, 0x80, 0x34, 0x10}, jfm */ - {0xd0, 0x21, 0x12, 0x1c, 0x00, 0x80, 0x34, 0x10}, /* jfm */ + {0xd0, 0x21, 0x12, 0x5c, 0x00, 0x80, 0x34, 0x10}, /* jfm */ {0xa0, 0x21, 0x1b, 0x04, 0x00, 0x80, 0x34, 0x10}, {0xa0, 0x21, 0x20, 0x44, 0x00, 0x80, 0x34, 0x10}, {0xa0, 0x21, 0x23, 0xee, 0x00, 0x80, 0x34, 0x10}, -- cgit v1.2.1 From a1198ccf9c52922e66a3372b0045ebe335a127dd Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 8 Jan 2011 09:53:32 -0300 Subject: [media] v4l2-ioctl: fix incorrect error code if VIDIOC_DBG_G/S_REGISTER are unsupported The ioctls VIDIOC_DBG_S_REGISTER and VIDIOC_DBG_G_REGISTER should return -EINVAL if the driver didn't implement them. Currently they return -EPERM if called as non-root user. However, this check should only be done if the driver actually implemented these ioctls. Otherwise, just return -EINVAL as we do with all unimplemented ioctls. This bug make the v4l2-compliance test suite fail. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ioctl.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 7e47f15f350d..f51327ef6757 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -1659,20 +1659,24 @@ static long __video_do_ioctl(struct file *file, { struct v4l2_dbg_register *p = arg; - if (!capable(CAP_SYS_ADMIN)) - ret = -EPERM; - else if (ops->vidioc_g_register) - ret = ops->vidioc_g_register(file, fh, p); + if (ops->vidioc_g_register) { + if (!capable(CAP_SYS_ADMIN)) + ret = -EPERM; + else + ret = ops->vidioc_g_register(file, fh, p); + } break; } case VIDIOC_DBG_S_REGISTER: { struct v4l2_dbg_register *p = arg; - if (!capable(CAP_SYS_ADMIN)) - ret = -EPERM; - else if (ops->vidioc_s_register) - ret = ops->vidioc_s_register(file, fh, p); + if (ops->vidioc_s_register) { + if (!capable(CAP_SYS_ADMIN)) + ret = -EPERM; + else + ret = ops->vidioc_s_register(file, fh, p); + } break; } #endif -- cgit v1.2.1 From 131ddd1a3072aebca666767151acaa7574beb583 Mon Sep 17 00:00:00 2001 From: Tobias Lorenz Date: Sat, 8 Jan 2011 14:12:30 -0300 Subject: [media] radio-si470x: de-emphasis should be set if requested by module parameter instead of always setting de-emphasis. Reported-by: Tobias Lorenz Signed-off-by: Joonyoung Shim Acked-by: Tobias Lorenz Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/si470x/radio-si470x-common.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/radio/si470x/radio-si470x-common.c b/drivers/media/radio/si470x/radio-si470x-common.c index ac76dfe5b3fa..35488baf29bd 100644 --- a/drivers/media/radio/si470x/radio-si470x-common.c +++ b/drivers/media/radio/si470x/radio-si470x-common.c @@ -357,7 +357,8 @@ int si470x_start(struct si470x_device *radio) goto done; /* sysconfig 1 */ - radio->registers[SYSCONFIG1] = SYSCONFIG1_DE; + radio->registers[SYSCONFIG1] = + (de << 11) & SYSCONFIG1_DE; /* DE*/ retval = si470x_set_register(radio, SYSCONFIG1); if (retval < 0) goto done; -- cgit v1.2.1 From 186a21cb77ffe23397aaea302ab32b510b3e2df4 Mon Sep 17 00:00:00 2001 From: Tobias Lorenz Date: Sat, 8 Jan 2011 16:13:04 -0300 Subject: [media] radio-si470x: Always report support for RDS The si470x i2c and usb driver support the RDS, so this ifdef statement doesn't need more. [mchehab@redhat.com: Fix a conflict on it] Signed-off-by: Joonyoung Shim Acked-by: Tobias Lorenz Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/si470x/radio-si470x-common.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/radio/si470x/radio-si470x-common.c b/drivers/media/radio/si470x/radio-si470x-common.c index 35488baf29bd..60c176fe328e 100644 --- a/drivers/media/radio/si470x/radio-si470x-common.c +++ b/drivers/media/radio/si470x/radio-si470x-common.c @@ -688,12 +688,8 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv, /* driver constants */ strcpy(tuner->name, "FM"); tuner->type = V4L2_TUNER_RADIO; -#if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE) tuner->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO; -#else - tuner->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; -#endif /* range limits */ switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_BAND) >> 6) { @@ -719,12 +715,10 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv, tuner->rxsubchans = V4L2_TUNER_SUB_MONO; else tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; -#if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE) /* If there is a reliable method of detecting an RDS channel, then this code should check for that before setting this RDS subchannel. */ tuner->rxsubchans |= V4L2_TUNER_SUB_RDS; -#endif /* mono/stereo selector */ if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 0) -- cgit v1.2.1 From 312d63e4b0ca8456c82d01a6446795f7d029ecde Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 12 Jan 2011 12:16:34 -0300 Subject: [media] rc-dib0700-nec: Fix keytable for Pixelview SBTVD dib0700 now outputs NEC extended keycodes. Fix the keytable to reflect that. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/keymaps/rc-dib0700-nec.c | 52 +++++++++++++++---------------- 1 file changed, 26 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/media/rc/keymaps/rc-dib0700-nec.c b/drivers/media/rc/keymaps/rc-dib0700-nec.c index c59851b203da..7a5f5300caf9 100644 --- a/drivers/media/rc/keymaps/rc-dib0700-nec.c +++ b/drivers/media/rc/keymaps/rc-dib0700-nec.c @@ -19,35 +19,35 @@ static struct rc_map_table dib0700_nec_table[] = { /* Key codes for the Pixelview SBTVD remote */ - { 0x8613, KEY_MUTE }, - { 0x8612, KEY_POWER }, - { 0x8601, KEY_1 }, - { 0x8602, KEY_2 }, - { 0x8603, KEY_3 }, - { 0x8604, KEY_4 }, - { 0x8605, KEY_5 }, - { 0x8606, KEY_6 }, - { 0x8607, KEY_7 }, - { 0x8608, KEY_8 }, - { 0x8609, KEY_9 }, - { 0x8600, KEY_0 }, - { 0x860d, KEY_CHANNELUP }, - { 0x8619, KEY_CHANNELDOWN }, - { 0x8610, KEY_VOLUMEUP }, - { 0x860c, KEY_VOLUMEDOWN }, + { 0x866b13, KEY_MUTE }, + { 0x866b12, KEY_POWER }, + { 0x866b01, KEY_1 }, + { 0x866b02, KEY_2 }, + { 0x866b03, KEY_3 }, + { 0x866b04, KEY_4 }, + { 0x866b05, KEY_5 }, + { 0x866b06, KEY_6 }, + { 0x866b07, KEY_7 }, + { 0x866b08, KEY_8 }, + { 0x866b09, KEY_9 }, + { 0x866b00, KEY_0 }, + { 0x866b0d, KEY_CHANNELUP }, + { 0x866b19, KEY_CHANNELDOWN }, + { 0x866b10, KEY_VOLUMEUP }, + { 0x866b0c, KEY_VOLUMEDOWN }, - { 0x860a, KEY_CAMERA }, - { 0x860b, KEY_ZOOM }, - { 0x861b, KEY_BACKSPACE }, - { 0x8615, KEY_ENTER }, + { 0x866b0a, KEY_CAMERA }, + { 0x866b0b, KEY_ZOOM }, + { 0x866b1b, KEY_BACKSPACE }, + { 0x866b15, KEY_ENTER }, - { 0x861d, KEY_UP }, - { 0x861e, KEY_DOWN }, - { 0x860e, KEY_LEFT }, - { 0x860f, KEY_RIGHT }, + { 0x866b1d, KEY_UP }, + { 0x866b1e, KEY_DOWN }, + { 0x866b0e, KEY_LEFT }, + { 0x866b0f, KEY_RIGHT }, - { 0x8618, KEY_RECORD }, - { 0x861a, KEY_STOP }, + { 0x866b18, KEY_RECORD }, + { 0x866b1a, KEY_STOP }, /* Key codes for the EvolutePC TVWay+ remote */ { 0x7a00, KEY_MENU }, -- cgit v1.2.1 From 59aa346009c06c6697e9db008e67e4ff8c205091 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 12 Jan 2011 12:17:52 -0300 Subject: [media] dib0700: Fix IR keycode handling Fixes Fedora 14 bug: https://bugzilla.redhat.com/show_bug.cgi?id=667157 There are a few bugs at the code that generates the scancode at dib0700: - RC keycode is wrong (it outputs a 24 bits keycode); - NEC extended outputs a keycode that have endiannes issues; - keycode tables for NEC extended remotes need to be updated. The last issue need to be done as we get reports, as we don't have the complete NEC-extended keycodes at the dibcom table. This patch fixes the first two issues. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index 8ca48f76dfa9..98ffb40728e3 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -514,8 +514,8 @@ struct dib0700_rc_response { union { u16 system16; struct { - u8 system; u8 not_system; + u8 system; }; }; u8 data; @@ -575,7 +575,7 @@ static void dib0700_rc_urb_completion(struct urb *purb) if ((poll_reply->system ^ poll_reply->not_system) != 0xff) { deb_data("NEC extended protocol\n"); /* NEC extended code - 24 bits */ - keycode = poll_reply->system16 << 8 | poll_reply->data; + keycode = be16_to_cpu(poll_reply->system16) << 8 | poll_reply->data; } else { deb_data("NEC normal protocol\n"); /* normal NEC code - 16 bits */ @@ -587,7 +587,7 @@ static void dib0700_rc_urb_completion(struct urb *purb) deb_data("RC5 protocol\n"); /* RC5 Protocol */ toggle = poll_reply->report_id; - keycode = poll_reply->system16 << 8 | poll_reply->data; + keycode = poll_reply->system << 8 | poll_reply->data; break; } -- cgit v1.2.1 From e6bcb2f324cf28469d2713e86beace07f25596cf Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 12 Jan 2011 13:50:01 -0300 Subject: [media] ir-kbd-i2c: Make IR debug messages more useful Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ir-kbd-i2c.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index c87b6bc45555..b173e409cd28 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -244,15 +244,17 @@ static void ir_key_poll(struct IR_i2c *ir) static u32 ir_key, ir_raw; int rc; - dprintk(2,"ir_poll_key\n"); + dprintk(3, "%s\n", __func__); rc = ir->get_key(ir, &ir_key, &ir_raw); if (rc < 0) { dprintk(2,"error\n"); return; } - if (rc) + if (rc) { + dprintk(1, "%s: keycode = 0x%04x\n", __func__, ir_key); rc_keydown(ir->rc, ir_key, 0); + } } static void ir_work(struct work_struct *work) -- cgit v1.2.1 From 5a85025f7dabc5b039335a7d1fb5f9002efa9488 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 12 Jan 2011 14:22:42 -0300 Subject: [media] em28xx: Fix IR support for WinTV USB2 Due to a lack of a break inside the switch, it were getting the wrong keytable and get_key function. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 099d5df8c572..ba03a448b41d 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -2437,6 +2437,7 @@ void em28xx_register_i2c_ir(struct em28xx *dev) dev->init_data.ir_codes = RC_MAP_RC5_HAUPPAUGE_NEW; dev->init_data.get_key = em28xx_get_key_em_haup; dev->init_data.name = "i2c IR (EM2840 Hauppauge)"; + break; case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE: dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE; dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe; -- cgit v1.2.1 From 567aba0b7997dad5fe3fb4aeb174ee9018df8c5b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Jan 2011 11:58:36 -0300 Subject: [media] tda8290: Make all read operations atomic Read operations should be preceeded by a write operation. However, nothing prevents that an I2C operation could happen between the two transactions. To avoid that problem, use an unique I2C transfer for both parts of the I2C transaction. Cc: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda8290.c | 119 +++++++++++++++++++--------------- 1 file changed, 66 insertions(+), 53 deletions(-) (limited to 'drivers') diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c index c9062ceddc71..5f889c1b91d0 100644 --- a/drivers/media/common/tuners/tda8290.c +++ b/drivers/media/common/tuners/tda8290.c @@ -95,8 +95,7 @@ static int tda8295_i2c_bridge(struct dvb_frontend *fe, int close) msleep(20); } else { msg = disable; - tuner_i2c_xfer_send(&priv->i2c_props, msg, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &msg[1], 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, msg, 1, &msg[1], 1); buf[2] = msg[1]; buf[2] &= ~0x04; @@ -239,13 +238,15 @@ static void tda8290_set_params(struct dvb_frontend *fe, fe->ops.tuner_ops.set_analog_params(fe, params); for (i = 0; i < 3; i++) { - tuner_i2c_xfer_send(&priv->i2c_props, &addr_pll_stat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &pll_stat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_pll_stat, 1, &pll_stat, 1); if (pll_stat & 0x80) { - tuner_i2c_xfer_send(&priv->i2c_props, &addr_adc_sat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &adc_sat, 1); - tuner_i2c_xfer_send(&priv->i2c_props, &addr_agc_stat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &agc_stat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_adc_sat, 1, + &adc_sat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_agc_stat, 1, + &agc_stat, 1); tuner_dbg("tda8290 is locked, AGC: %d\n", agc_stat); break; } else { @@ -259,20 +260,22 @@ static void tda8290_set_params(struct dvb_frontend *fe, agc_stat, adc_sat, pll_stat & 0x80); tuner_i2c_xfer_send(&priv->i2c_props, gainset_2, 2); msleep(100); - tuner_i2c_xfer_send(&priv->i2c_props, &addr_agc_stat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &agc_stat, 1); - tuner_i2c_xfer_send(&priv->i2c_props, &addr_pll_stat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &pll_stat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_agc_stat, 1, &agc_stat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_pll_stat, 1, &pll_stat, 1); if ((agc_stat > 115) || !(pll_stat & 0x80)) { tuner_dbg("adjust gain, step 2. Agc: %d, lock: %d\n", agc_stat, pll_stat & 0x80); if (priv->cfg.agcf) priv->cfg.agcf(fe); msleep(100); - tuner_i2c_xfer_send(&priv->i2c_props, &addr_agc_stat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &agc_stat, 1); - tuner_i2c_xfer_send(&priv->i2c_props, &addr_pll_stat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &pll_stat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_agc_stat, 1, + &agc_stat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_pll_stat, 1, + &pll_stat, 1); if((agc_stat > 115) || !(pll_stat & 0x80)) { tuner_dbg("adjust gain, step 3. Agc: %d\n", agc_stat); tuner_i2c_xfer_send(&priv->i2c_props, adc_head_12, 2); @@ -284,10 +287,12 @@ static void tda8290_set_params(struct dvb_frontend *fe, /* l/ l' deadlock? */ if(priv->tda8290_easy_mode & 0x60) { - tuner_i2c_xfer_send(&priv->i2c_props, &addr_adc_sat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &adc_sat, 1); - tuner_i2c_xfer_send(&priv->i2c_props, &addr_pll_stat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &pll_stat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_adc_sat, 1, + &adc_sat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_pll_stat, 1, + &pll_stat, 1); if ((adc_sat > 20) || !(pll_stat & 0x80)) { tuner_dbg("trying to resolve SECAM L deadlock\n"); tuner_i2c_xfer_send(&priv->i2c_props, agc_rst_on, 2); @@ -307,8 +312,7 @@ static void tda8295_power(struct dvb_frontend *fe, int enable) struct tda8290_priv *priv = fe->analog_demod_priv; unsigned char buf[] = { 0x30, 0x00 }; /* clb_stdbt */ - tuner_i2c_xfer_send(&priv->i2c_props, &buf[0], 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &buf[1], 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, &buf[0], 1, &buf[1], 1); if (enable) buf[1] = 0x01; @@ -323,8 +327,7 @@ static void tda8295_set_easy_mode(struct dvb_frontend *fe, int enable) struct tda8290_priv *priv = fe->analog_demod_priv; unsigned char buf[] = { 0x01, 0x00 }; - tuner_i2c_xfer_send(&priv->i2c_props, &buf[0], 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &buf[1], 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, &buf[0], 1, &buf[1], 1); if (enable) buf[1] = 0x01; /* rising edge sets regs 0x02 - 0x23 */ @@ -353,8 +356,7 @@ static void tda8295_agc1_out(struct dvb_frontend *fe, int enable) struct tda8290_priv *priv = fe->analog_demod_priv; unsigned char buf[] = { 0x02, 0x00 }; /* DIV_FUNC */ - tuner_i2c_xfer_send(&priv->i2c_props, &buf[0], 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &buf[1], 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, &buf[0], 1, &buf[1], 1); if (enable) buf[1] &= ~0x40; @@ -370,10 +372,10 @@ static void tda8295_agc2_out(struct dvb_frontend *fe, int enable) unsigned char set_gpio_cf[] = { 0x44, 0x00 }; unsigned char set_gpio_val[] = { 0x46, 0x00 }; - tuner_i2c_xfer_send(&priv->i2c_props, &set_gpio_cf[0], 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &set_gpio_cf[1], 1); - tuner_i2c_xfer_send(&priv->i2c_props, &set_gpio_val[0], 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &set_gpio_val[1], 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &set_gpio_cf[0], 1, &set_gpio_cf[1], 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &set_gpio_val[0], 1, &set_gpio_val[1], 1); set_gpio_cf[1] &= 0xf0; /* clear GPIO_0 bits 3-0 */ @@ -392,8 +394,7 @@ static int tda8295_has_signal(struct dvb_frontend *fe) unsigned char hvpll_stat = 0x26; unsigned char ret; - tuner_i2c_xfer_send(&priv->i2c_props, &hvpll_stat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &ret, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, &hvpll_stat, 1, &ret, 1); return (ret & 0x01) ? 65535 : 0; } @@ -413,8 +414,8 @@ static void tda8295_set_params(struct dvb_frontend *fe, tda8295_power(fe, 1); tda8295_agc1_out(fe, 1); - tuner_i2c_xfer_send(&priv->i2c_props, &blanking_mode[0], 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &blanking_mode[1], 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &blanking_mode[0], 1, &blanking_mode[1], 1); tda8295_set_video_std(fe); @@ -447,8 +448,8 @@ static int tda8290_has_signal(struct dvb_frontend *fe) unsigned char i2c_get_afc[1] = { 0x1B }; unsigned char afc = 0; - tuner_i2c_xfer_send(&priv->i2c_props, i2c_get_afc, ARRAY_SIZE(i2c_get_afc)); - tuner_i2c_xfer_recv(&priv->i2c_props, &afc, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + i2c_get_afc, ARRAY_SIZE(i2c_get_afc), &afc, 1); return (afc & 0x80)? 65535:0; } @@ -654,20 +655,26 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) static int tda8290_probe(struct tuner_i2c_props *i2c_props) { #define TDA8290_ID 0x89 - unsigned char tda8290_id[] = { 0x1f, 0x00 }; + u8 reg = 0x1f, id; + struct i2c_msg msg_read[] = { + { .addr = 0x4b, .flags = 0, .len = 1, .buf = ® }, + { .addr = 0x4b, .flags = I2C_M_RD, .len = 1, .buf = &id }, + }; /* detect tda8290 */ - tuner_i2c_xfer_send(i2c_props, &tda8290_id[0], 1); - tuner_i2c_xfer_recv(i2c_props, &tda8290_id[1], 1); + if (i2c_transfer(i2c_props->adap, msg_read, 2) != 2) { + printk(KERN_WARNING "%s: tda8290 couldn't read register 0x%02x\n", + __func__, reg); + return -ENODEV; + } - if (tda8290_id[1] == TDA8290_ID) { + if (id == TDA8290_ID) { if (debug) printk(KERN_DEBUG "%s: tda8290 detected @ %d-%04x\n", __func__, i2c_adapter_id(i2c_props->adap), i2c_props->addr); return 0; } - return -ENODEV; } @@ -675,16 +682,23 @@ static int tda8295_probe(struct tuner_i2c_props *i2c_props) { #define TDA8295_ID 0x8a #define TDA8295C2_ID 0x8b - unsigned char tda8295_id[] = { 0x2f, 0x00 }; + u8 reg = 0x2f, id; + struct i2c_msg msg_read[] = { + { .addr = 0x4b, .flags = 0, .len = 1, .buf = ® }, + { .addr = 0x4b, .flags = I2C_M_RD, .len = 1, .buf = &id }, + }; - /* detect tda8295 */ - tuner_i2c_xfer_send(i2c_props, &tda8295_id[0], 1); - tuner_i2c_xfer_recv(i2c_props, &tda8295_id[1], 1); + /* detect tda8290 */ + if (i2c_transfer(i2c_props->adap, msg_read, 2) != 2) { + printk(KERN_WARNING "%s: tda8290 couldn't read register 0x%02x\n", + __func__, reg); + return -ENODEV; + } - if ((tda8295_id[1] & 0xfe) == TDA8295_ID) { + if ((id & 0xfe) == TDA8295_ID) { if (debug) printk(KERN_DEBUG "%s: %s detected @ %d-%04x\n", - __func__, (tda8295_id[1] == TDA8295_ID) ? + __func__, (id == TDA8295_ID) ? "tda8295c1" : "tda8295c2", i2c_adapter_id(i2c_props->adap), i2c_props->addr); @@ -809,8 +823,8 @@ int tda829x_probe(struct i2c_adapter *i2c_adap, u8 i2c_addr) int i; /* rule out tda9887, which would return the same byte repeatedly */ - tuner_i2c_xfer_send(&i2c_props, soft_reset, 1); - tuner_i2c_xfer_recv(&i2c_props, buf, PROBE_BUFFER_SIZE); + tuner_i2c_xfer_send_recv(&i2c_props, + soft_reset, 1, buf, PROBE_BUFFER_SIZE); for (i = 1; i < PROBE_BUFFER_SIZE; i++) { if (buf[i] != buf[0]) break; @@ -827,13 +841,12 @@ int tda829x_probe(struct i2c_adapter *i2c_adap, u8 i2c_addr) /* fall back to old probing method */ tuner_i2c_xfer_send(&i2c_props, easy_mode_b, 2); tuner_i2c_xfer_send(&i2c_props, soft_reset, 2); - tuner_i2c_xfer_send(&i2c_props, &addr_dto_lsb, 1); - tuner_i2c_xfer_recv(&i2c_props, &data, 1); + tuner_i2c_xfer_send_recv(&i2c_props, &addr_dto_lsb, 1, &data, 1); if (data == 0) { tuner_i2c_xfer_send(&i2c_props, easy_mode_g, 2); tuner_i2c_xfer_send(&i2c_props, soft_reset, 2); - tuner_i2c_xfer_send(&i2c_props, &addr_dto_lsb, 1); - tuner_i2c_xfer_recv(&i2c_props, &data, 1); + tuner_i2c_xfer_send_recv(&i2c_props, + &addr_dto_lsb, 1, &data, 1); if (data == 0x7b) { return 0; } -- cgit v1.2.1 From 47ab285a960ac456506297c93322ab13c3522f5a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Jan 2011 12:02:00 -0300 Subject: [media] tda8290: Fix a bug if no tuner is detected If tda8290 is detected, but no tuner is found, the driver will do bad things: tuner 2-0060: chip found @ 0xc0 (saa7133[0]) tda829x 2-0060: could not clearly identify tuner address, defaulting to 60 tda829x 2-0060: tuner access failed! BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [] set_audio+0x47/0x170 [tda8290] PGD 1187b0067 PUD 11771e067 PMD 0 Oops: 0002 [#1] SMP last sysfs file: /sys/module/i2c_core/initstate CPU 0 Modules linked in: tda8290(U) tea5767(U) tuner(U) ir_lirc_codec(U) lirc_dev(U) ir_sony_decoder(U) ir_jvc_decoder(U) ir_rc6_decoder(U) ir_rc5_decoder(U) saa7134(+)(U) v4l2_common(U) ir_nec_decoder(U) videodev(U) v4l2_compat_ioctl32(U) rc_core(U) videobuf_dma_sg(U) videobuf_core(U) tveeprom(U) ebtable_nat ebtables xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table xt_physdev iptable_filter ip_tables ip6t_REJECT ip6table_filter ip6_tables ipv6 dm_mirror dm_region_hash dm_log parport kvm_intel kvm uinput floppy tpm_infineon wmi sg serio_raw iTCO_wdt iTCO_vendor_support tg3 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc i7core_edac edac_core nouveau Modules linked in: tda8290(U) tea5767(U) tuner(U) ir_lirc_codec(U) lirc_dev(U) ir_sony_decoder(U) ir_jvc_decoder(U) ir_rc6_decoder(U) ir_rc5_decoder(U) saa7134(+)(U) v4l2_common(U) ir_nec_decoder(U) videodev(U) v4l2_compat_ioctl32(U) rc_core(U) videobuf_dma_sg(U) videobuf_core(U) tveeprom(U) ebtable_nat ebtables xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table xt_physdev iptable_filter ip_tables ip6t_REJECT ip6table_filter ip6_tables ipv6 dm_mirror dm_region_hash dm_log parport kvm_intel kvm uinput floppy tpm_infineon wmi sg serio_raw iTCO_wdt iTCO_vendor_support tg3 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc i7core_edac edac_core nouveau ttm drm_kms_helper drm i2c_algo_bit video output i2c_core ext3 jbd mbcache firewire_ohci firewire_core crc_itu_t sr_mod cdrom sd_mod crc_t10dif ahci dm_mod [last unloaded: microcode] Pid: 9497, comm: modprobe Not tainted 2.6.32-72.el6.x86_64 #1 HP Z400 Workstation RIP: 0010:[] [] set_audio+0x47/0x170 [tda8290] RSP: 0018:ffff88010ba01b28 EFLAGS: 00010206 RAX: 00000000000000ff RBX: ffff880119522800 RCX: 0000000000000002 RDX: 0000000000003be0 RSI: ffff88010ba01bb8 RDI: 0000000000000000 RBP: ffff88010ba01b28 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88010ba01bb8 R14: 0000000000001900 R15: 0000000000001900 FS: 00007f4b96b3d700(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 000000011866c000 CR4: 00000000000026f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 9497, threadinfo ffff88010ba00000, task ffff880100708a70) Stack: ffff88010ba01b98 ffffffffa048c95b ffff88010ba01b78 0000000000000060 <0> 0000000000000000 0000000e00000000 000000000000001d ffffffffa03ec838 <0> ffff88010abac240 ffff880119522800 ffff880119522800 ffff880119522bc0 Call Trace: [] tda8295_set_params+0x3b/0x210 [tda8290] [] ? v4l2_i2c_new_subdev_cfg+0x88/0xc0 [v4l2_common] [] set_freq+0x128/0x2f0 [tuner] [] tuner_s_std+0xc4/0x740 [tuner] [] saa7134_set_tvnorm_hw+0x2d6/0x3d0 [saa7134] [] set_tvnorm+0xd5/0x100 [saa7134] [] saa7134_video_init2+0x1d/0x50 [saa7134] [] saa7134_initdev+0x6e1/0xb1d [saa7134] [] ? kobject_get+0x1a/0x30 [] local_pci_probe+0x17/0x20 [] pci_device_probe+0x101/0x120 [] ? driver_sysfs_add+0x62/0x90 [] driver_probe_device+0xa0/0x2a0 [] __driver_attach+0xab/0xb0 [] ? __driver_attach+0x0/0xb0 [] bus_for_each_dev+0x64/0x90 [] driver_attach+0x1e/0x20 [] bus_add_driver+0x200/0x300 [] driver_register+0x76/0x140 [] ? printk+0x41/0x46 [] __pci_register_driver+0x56/0xd0 [] ? saa7134_init+0x0/0x4f [saa7134] [] saa7134_init+0x4d/0x4f [saa7134] [] do_one_initcall+0x3c/0x1d0 [] sys_init_module+0xdf/0x250 [] system_call_fastpath+0x16/0x1b Code: 20 01 49 c7 c0 c9 ec 48 a0 83 7e 04 01 74 2d 8b 0d 3f 2f 00 00 85 c9 0f 85 d7 00 00 00 c9 c3 0f 1f 44 00 00 a9 03 00 01 00 74 61 47 20 02 83 7e 04 01 49 c7 c0 cc ec 48 a0 75 d3 0f b6 47 22 RIP [] set_audio+0x47/0x170 [tda8290] RSP CR2: 0000000000000020 This happens because some I2C callbacks actually depend on having the driver entirely initialized. To avoid this OOPS, just clean the I2C callbacks, as if no device were detected. Cc: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda8290.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c index 5f889c1b91d0..11ea4e0f9c04 100644 --- a/drivers/media/common/tuners/tda8290.c +++ b/drivers/media/common/tuners/tda8290.c @@ -755,8 +755,11 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, } if ((!(cfg) || (TDA829X_PROBE_TUNER == cfg->probe_tuner)) && - (tda829x_find_tuner(fe) < 0)) + (tda829x_find_tuner(fe) < 0)) { + memset(&fe->ops.analog_ops, 0, sizeof(struct analog_demod_ops)); + goto fail; + } switch (priv->ver) { case TDA8290: -- cgit v1.2.1 From 9d700a0696ae241380e8ca833bb5a358620d33f6 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Jan 2011 14:01:39 -0300 Subject: [media] tda8290: Turn tda829x on before touching at the I2C gate On Kworld SBTVD, tda8295-c1 starts in power off mode. It needs to be powered, otherwise, the I2C gate control command won't work. Cc: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda8290.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c index 11ea4e0f9c04..419d064a0188 100644 --- a/drivers/media/common/tuners/tda8290.c +++ b/drivers/media/common/tuners/tda8290.c @@ -754,11 +754,10 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, sizeof(struct analog_demod_ops)); } - if ((!(cfg) || (TDA829X_PROBE_TUNER == cfg->probe_tuner)) && - (tda829x_find_tuner(fe) < 0)) { - memset(&fe->ops.analog_ops, 0, sizeof(struct analog_demod_ops)); - - goto fail; + if (!(cfg) || (TDA829X_PROBE_TUNER == cfg->probe_tuner)) { + tda8295_power(fe, 1); + if (tda829x_find_tuner(fe) < 0) + goto fail; } switch (priv->ver) { @@ -803,6 +802,8 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, return fe; fail: + memset(&fe->ops.analog_ops, 0, sizeof(struct analog_demod_ops)); + tda829x_release(fe); return NULL; } -- cgit v1.2.1 From 7570800c9de39c718f84ec4ea820a788556cde4b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 14 Jan 2011 08:50:00 -0300 Subject: [media] mb86a20s: Fix i2c read/write error messages A script replaced err var to rc. Howerver, this script gambled "error" string, changing it to "rcor". Revert that bad change. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mb86a20s.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/frontends/mb86a20s.c b/drivers/media/dvb/frontends/mb86a20s.c index d3ad3e75a35a..e06507d2c3b2 100644 --- a/drivers/media/dvb/frontends/mb86a20s.c +++ b/drivers/media/dvb/frontends/mb86a20s.c @@ -318,7 +318,7 @@ static int mb86a20s_i2c_writereg(struct mb86a20s_state *state, rc = i2c_transfer(state->i2c, &msg, 1); if (rc != 1) { - printk("%s: writereg rcor(rc == %i, reg == 0x%02x," + printk("%s: writereg error (rc == %i, reg == 0x%02x," " data == 0x%02x)\n", __func__, rc, reg, data); return rc; } @@ -353,7 +353,7 @@ static int mb86a20s_i2c_readreg(struct mb86a20s_state *state, rc = i2c_transfer(state->i2c, msg, 2); if (rc != 2) { - rc("%s: reg=0x%x (rcor=%d)\n", __func__, reg, rc); + rc("%s: reg=0x%x (error=%d)\n", __func__, reg, rc); return rc; } -- cgit v1.2.1 From c736a5f28e81299b05ad14e892bdfb414daa9f5f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 14 Jan 2011 11:10:05 -0300 Subject: [media] mb86a20s: Be sure that device is initialized before starting DVB Due to a hard to track bug between tda829x/tda18271/saa7134, tda829x wants to go to analog mode during DVB initialization, causing some I2C errors. The analog failure doesn't cause any harm, as the device were already properly initialized in analog mode. However, the failure at the digital mode causes the frontend mb86a20s to not initialize. Fortunately, at least on my tests, it was possible to detect that the device is a mb86a20s before the failure. What happens is that tda8290 is a very bad boy: during DVB setup, it keeps insisting to call tda18271 analog_set_params, that calls tune_agc code. The tune_agc code calls saa7134 driver, changing the value of GPIO 27, switching from digital to analog mode and disabling the access to mb86a20s, as, on Kworld SBTVD, the same GPIO used to switch the hardware AGC mode seems to be used to enable the I2C switch that allows access to the frontend (mb86a20s). So, a call to analog_set_params ultimately disables the access to the frontend, and causes a failure at the init frontend logic. This patch is a workaround for this issue: it simply checks if the frontend init had any failure. If so, it will init the frontend when some DTV application will try to set DVB mode. Even being a hack for Kworld SBTVD to work, and assumning that we could teach tda8290 to be a good boy, this is actually an improvement at the frontend driver, as it will be more reliable to initialization failures. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mb86a20s.c | 32 ++++++++++++++++++++++++++++---- 1 file changed, 28 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/frontends/mb86a20s.c b/drivers/media/dvb/frontends/mb86a20s.c index e06507d2c3b2..cc4acd2f920d 100644 --- a/drivers/media/dvb/frontends/mb86a20s.c +++ b/drivers/media/dvb/frontends/mb86a20s.c @@ -43,6 +43,8 @@ struct mb86a20s_state { const struct mb86a20s_config *config; struct dvb_frontend frontend; + + bool need_init; }; struct regdata { @@ -382,23 +384,31 @@ static int mb86a20s_initfe(struct dvb_frontend *fe) /* Initialize the frontend */ rc = mb86a20s_writeregdata(state, mb86a20s_init); if (rc < 0) - return rc; + goto err; if (!state->config->is_serial) { regD5 &= ~1; rc = mb86a20s_writereg(state, 0x50, 0xd5); if (rc < 0) - return rc; + goto err; rc = mb86a20s_writereg(state, 0x51, regD5); if (rc < 0) - return rc; + goto err; } if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); - return 0; +err: + if (rc < 0) { + state->need_init = true; + printk(KERN_INFO "mb86a20s: Init failed. Will try again later\n"); + } else { + state->need_init = false; + dprintk("Initialization succeded.\n"); + } + return rc; } static int mb86a20s_read_signal_strength(struct dvb_frontend *fe, u16 *strength) @@ -485,8 +495,22 @@ static int mb86a20s_set_frontend(struct dvb_frontend *fe, if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); + dprintk("Calling tuner set parameters\n"); fe->ops.tuner_ops.set_params(fe, p); + /* + * Make it more reliable: if, for some reason, the initial + * device initialization doesn't happen, initialize it when + * a SBTVD parameters are adjusted. + * + * Unfortunately, due to a hard to track bug at tda829x/tda18271, + * the agc callback logic is not called during DVB attach time, + * causing mb86a20s to not be initialized with Kworld SBTVD. + * So, this hack is needed, in order to make Kworld SBTVD to work. + */ + if (state->need_init) + mb86a20s_initfe(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception); -- cgit v1.2.1 From 6183040680c56ec4bd3d7c9398cbc05e84d60c1f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Jan 2011 14:24:44 -0300 Subject: [media] saa7134: Fix analog mode for Kworld SBTVD There were some issues at tda8290 that were preventing this device to work. Now that those fixes were fixed, we can enable analog mode. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-cards.c | 40 +++-------------------------- drivers/media/video/saa7134/saa7134-dvb.c | 40 +---------------------------- 2 files changed, 4 insertions(+), 76 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index e7aa588c6c5a..b2426000e1d8 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5179,18 +5179,8 @@ struct saa7134_board saa7134_boards[] = { [SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG] = { .name = "Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid", .audio_clock = 0x00187de7, -#if 0 - /* - * FIXME: Analog mode doesn't work, if digital is enabled. The proper - * fix is to use tda8290 driver, but Kworld seems to use an - * unsupported version of tda8295. - */ - .tuner_type = TUNER_NXP_TDA18271, /* TUNER_PHILIPS_TDA8290 */ - .tuner_addr = 0x60, -#else - .tuner_type = UNSET, + .tuner_type = TUNER_PHILIPS_TDA8290, .tuner_addr = ADDR_UNSET, -#endif .radio_type = UNSET, .radio_addr = ADDR_UNSET, .gpiomask = 0x8e054000, @@ -5201,6 +5191,7 @@ struct saa7134_board saa7134_boards[] = { .vmux = 1, .amux = TV, .tv = 1, + .gpio = 0x4000, #if 0 /* FIXME */ }, { .name = name_comp1, @@ -7659,36 +7650,11 @@ int saa7134_board_init2(struct saa7134_dev *dev) break; } case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: - { - struct i2c_msg msg = { .addr = 0x4b, .flags = 0 }; - int i; - static u8 buffer[][2] = { - {0x30, 0x31}, - {0xff, 0x00}, - {0x41, 0x03}, - {0x41, 0x1a}, - {0xff, 0x02}, - {0x34, 0x00}, - {0x45, 0x97}, - {0x45, 0xc1}, - }; saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000); saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x4000); - /* - * FIXME: identify what device is at addr 0x4b and what means - * this initialization - */ - for (i = 0; i < ARRAY_SIZE(buffer); i++) { - msg.buf = &buffer[i][0]; - msg.len = ARRAY_SIZE(buffer[0]); - if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) - printk(KERN_WARNING - "%s: Unable to enable tuner(%i).\n", - dev->name, i); - } + saa7134_set_gpio(dev, 27, 0); break; - } } /* switch() */ /* initialize tuner */ diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 3315a48a848b..064bf2cd5f21 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -236,7 +236,7 @@ static struct tda18271_std_map mb86a20s_tda18271_std_map = { static struct tda18271_config kworld_tda18271_config = { .std_map = &mb86a20s_tda18271_std_map, - .gate = TDA18271_GATE_DIGITAL, + .gate = TDA18271_GATE_ANALOG, }; static const struct mb86a20s_config kworld_mb86a20s_config = { @@ -623,37 +623,6 @@ static struct tda827x_config tda827x_cfg_2_sw42 = { /* ------------------------------------------------------------------ */ -static int __kworld_sbtvd_i2c_gate_ctrl(struct saa7134_dev *dev, int enable) -{ - unsigned char initmsg[] = {0x45, 0x97}; - unsigned char msg_enable[] = {0x45, 0xc1}; - unsigned char msg_disable[] = {0x45, 0x81}; - struct i2c_msg msg = {.addr = 0x4b, .flags = 0, .buf = initmsg, .len = 2}; - - if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { - wprintk("could not access the I2C gate\n"); - return -EIO; - } - if (enable) - msg.buf = msg_enable; - else - msg.buf = msg_disable; - if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { - wprintk("could not access the I2C gate\n"); - return -EIO; - } - msleep(20); - return 0; -} -static int kworld_sbtvd_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) -{ - struct saa7134_dev *dev = fe->dvb->priv; - - return __kworld_sbtvd_i2c_gate_ctrl(dev, enable); -} - -/* ------------------------------------------------------------------ */ - static struct tda1004x_config tda827x_lifeview_config = { .demod_address = 0x08, .invert = 1, @@ -1660,7 +1629,6 @@ static int dvb_init(struct saa7134_dev *dev) } break; case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: - __kworld_sbtvd_i2c_gate_ctrl(dev, 0); saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x14000); saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x14000); msleep(20); @@ -1670,16 +1638,10 @@ static int dvb_init(struct saa7134_dev *dev) fe0->dvb.frontend = dvb_attach(mb86a20s_attach, &kworld_mb86a20s_config, &dev->i2c_adap); - __kworld_sbtvd_i2c_gate_ctrl(dev, 1); if (fe0->dvb.frontend != NULL) { dvb_attach(tda18271_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, &kworld_tda18271_config); - /* - * Only after success, it can initialize the gate, otherwise - * an OOPS will hit, due to kfree(fe0->dvb.frontend) - */ - fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_i2c_gate_ctrl; } break; default: -- cgit v1.2.1 From 6a58bc0f506c1825cb8f8b81a5123e26bf70902c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 14 Jan 2011 09:11:21 -0300 Subject: [media] saa7134: Fix digital mode on Kworld SBTVD This patch fixes digital mode on Kworld SBTVD. Unfortunately, it disables analog mode. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-cards.c | 5 +++- drivers/media/video/saa7134/saa7134-dvb.c | 38 ++++++++++++++++++++++++++++- 2 files changed, 41 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index b2426000e1d8..dea90a19043f 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5179,7 +5179,11 @@ struct saa7134_board saa7134_boards[] = { [SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG] = { .name = "Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid", .audio_clock = 0x00187de7, +#if 0 .tuner_type = TUNER_PHILIPS_TDA8290, +#else + .tuner_type = UNSET, +#endif .tuner_addr = ADDR_UNSET, .radio_type = UNSET, .radio_addr = ADDR_UNSET, @@ -5191,7 +5195,6 @@ struct saa7134_board saa7134_boards[] = { .vmux = 1, .amux = TV, .tv = 1, - .gpio = 0x4000, #if 0 /* FIXME */ }, { .name = name_comp1, diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 064bf2cd5f21..d2a12df28af0 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -236,13 +236,38 @@ static struct tda18271_std_map mb86a20s_tda18271_std_map = { static struct tda18271_config kworld_tda18271_config = { .std_map = &mb86a20s_tda18271_std_map, - .gate = TDA18271_GATE_ANALOG, + .gate = TDA18271_GATE_DIGITAL, }; static const struct mb86a20s_config kworld_mb86a20s_config = { .demod_address = 0x10, }; +static int kworld_sbtvd_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct saa7134_dev *dev = fe->dvb->priv; + + unsigned char initmsg[] = {0x45, 0x97}; + unsigned char msg_enable[] = {0x45, 0xc1}; + unsigned char msg_disable[] = {0x45, 0x81}; + struct i2c_msg msg = {.addr = 0x4b, .flags = 0, .buf = initmsg, .len = 2}; + + if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { + wprintk("could not access the I2C gate\n"); + return -EIO; + } + if (enable) + msg.buf = msg_enable; + else + msg.buf = msg_disable; + if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { + wprintk("could not access the I2C gate\n"); + return -EIO; + } + msleep(20); + return 0; +} + /* ================================================================== * tda1004x based DVB-T cards, helper functions */ @@ -1639,10 +1664,21 @@ static int dvb_init(struct saa7134_dev *dev) &kworld_mb86a20s_config, &dev->i2c_adap); if (fe0->dvb.frontend != NULL) { +#if 0 + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, + &tda829x_no_probe); +#else + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, NULL); +#endif dvb_attach(tda18271_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, &kworld_tda18271_config); + fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_gate_ctrl; } + + /* mb86a20s need to use the I2C gateway */ break; default: wprintk("Huh? unknown DVB card?\n"); -- cgit v1.2.1 From ecb71d262b0323981e07ce415da9b7adc917990a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 14 Jan 2011 12:03:03 -0300 Subject: [media] saa7134: Kworld SBTVD: make both analog and digital to work There are some weird bugs at tda8290/tda18271 initialization, as it insits do do analog initialization during DVB frontend attach: DVB: registering new adapter (saa7133[0]) DVB: registering adapter 0 frontend 0 (Fujitsu mb86A20s)... mb86a20s: mb86a20s_initfe tda18271_write_regs: [2-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 tda18271_init: [2-0060|M] error -5 on line 830 tda18271_tune: [2-0060|M] error -5 on line 908 tda18271_write_regs tda18271_write_regs: [2-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 tda18271c2_rf_tracking_filters_correction: [2-0060|M] error -5 on line 265 tda18271_write_regs tda18271_write_regs: [2-0060|M] ERROR: idx = 0x25, len = 1, i2c_transfer returned: -5 tda18271_channel_configuration: [2-0060|M] error -5 on line 119 tda18271_set_analog_params: [2-0060|M] error -5 on line 1045 tda18271_set_analog_params: [2-0060|M] error -5 on line 1045 tda829x 2-004b: tda8295 not locked, no signal? tda829x 2-004b: tda8295_i2c_bridge: disable i2c gate tda829x 2-004b: tda8295 not locked, no signal? tda829x 2-004b: tda8295_i2c_bridge: disable i2c gate mb86a20s_i2c_writereg: writereg error (rc == -5, reg == 0x29, data == 0x33) mb86a20s: Init failed. Will try again later The problem is that mb86a20s is only visible if the analog part is disabled. However, due to a trick at mb86a20s, it will later initialize properly: mb86a20s: mb86a20s_initfe: Initialization succeded. This is hacky and ugly. However, I coldn't find any easy way to fix it. A proper fix would be to have a resource locking schema, used by both V4L and DVB parts that would block access to analog registers while digital registers are in use, but this will probably put tda829x into a dead lock. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda8290.c | 1 + drivers/media/video/saa7134/saa7134-cards.c | 16 ++++++++++------ drivers/media/video/saa7134/saa7134-dvb.c | 16 +++++----------- 3 files changed, 16 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c index 419d064a0188..bc6a67768af1 100644 --- a/drivers/media/common/tuners/tda8290.c +++ b/drivers/media/common/tuners/tda8290.c @@ -232,6 +232,7 @@ static void tda8290_set_params(struct dvb_frontend *fe, tuner_i2c_xfer_send(&priv->i2c_props, pll_bw_nom, 2); } + tda8290_i2c_bridge(fe, 1); if (fe->ops.tuner_ops.set_analog_params) diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index dea90a19043f..deb8fcf4aa49 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5179,11 +5179,7 @@ struct saa7134_board saa7134_boards[] = { [SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG] = { .name = "Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid", .audio_clock = 0x00187de7, -#if 0 .tuner_type = TUNER_PHILIPS_TDA8290, -#else - .tuner_type = UNSET, -#endif .tuner_addr = ADDR_UNSET, .radio_type = UNSET, .radio_addr = ADDR_UNSET, @@ -6926,10 +6922,17 @@ static inline int saa7134_kworld_sbtvd_toggle_agc(struct saa7134_dev *dev, /* toggle AGC switch through GPIO 27 */ switch (mode) { case TDA18271_ANALOG: - saa7134_set_gpio(dev, 27, 0); + saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000); + saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x4000); + msleep(20); break; case TDA18271_DIGITAL: - saa7134_set_gpio(dev, 27, 1); + saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x14000); + saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x14000); + msleep(20); + saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x54000); + saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x54000); + msleep(30); break; default: return -EINVAL; @@ -6987,6 +6990,7 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev, int saa7134_tuner_callback(void *priv, int component, int command, int arg) { struct saa7134_dev *dev = priv; + if (dev != NULL) { switch (dev->tuner_type) { case TUNER_PHILIPS_TDA8290: diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index d2a12df28af0..f65cad287b83 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -237,6 +237,8 @@ static struct tda18271_std_map mb86a20s_tda18271_std_map = { static struct tda18271_config kworld_tda18271_config = { .std_map = &mb86a20s_tda18271_std_map, .gate = TDA18271_GATE_DIGITAL, + .config = 3, /* Use tuner callback for AGC */ + }; static const struct mb86a20s_config kworld_mb86a20s_config = { @@ -1654,24 +1656,16 @@ static int dvb_init(struct saa7134_dev *dev) } break; case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: - saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x14000); - saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x14000); - msleep(20); - saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x54000); - saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x54000); - msleep(20); + /* Switch to digital mode */ + saa7134_tuner_callback(dev, 0, + TDA18271_CALLBACK_CMD_AGC_ENABLE, 1); fe0->dvb.frontend = dvb_attach(mb86a20s_attach, &kworld_mb86a20s_config, &dev->i2c_adap); if (fe0->dvb.frontend != NULL) { -#if 0 dvb_attach(tda829x_attach, fe0->dvb.frontend, &dev->i2c_adap, 0x4b, &tda829x_no_probe); -#else - dvb_attach(tda829x_attach, fe0->dvb.frontend, - &dev->i2c_adap, 0x4b, NULL); -#endif dvb_attach(tda18271_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, &kworld_tda18271_config); -- cgit v1.2.1 From 3c7c9370fb645f4713e0fbbe69425d8db9b47a13 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 8 Jan 2011 07:08:02 -0300 Subject: [media] v4l2-subdev: remove core.s_config and v4l2_i2c_new_subdev_cfg() The core.s_config op was meant for legacy drivers that needed to work with old pre-2.6.26 kernels. This is no longer relevant. Unfortunately, this op was incorrectly called from several drivers. Replace those occurences with proper i2c_board_info structs and call v4l2_i2c_new_subdev_board. After these changes v4l2_i2c_new_subdev_cfg() was no longer used, so remove that function as well. Signed-off-by: Hans Verkuil Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cafe_ccic.c | 11 +++-- drivers/media/video/cx25840/cx25840-core.c | 22 +++------ drivers/media/video/em28xx/em28xx-cards.c | 18 ++++---- drivers/media/video/ivtv/ivtv-i2c.c | 9 +++- drivers/media/video/mt9v011.c | 54 ++++++++++++++-------- drivers/media/video/mt9v011.h | 36 --------------- drivers/media/video/ov7670.c | 74 +++++++++++++----------------- drivers/media/video/sr030pc30.c | 10 ---- drivers/media/video/v4l2-common.c | 19 +------- 9 files changed, 99 insertions(+), 154 deletions(-) delete mode 100644 drivers/media/video/mt9v011.h (limited to 'drivers') diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 49f1b8f1418e..55ffd60ffa7f 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -2001,6 +2001,11 @@ static int cafe_pci_probe(struct pci_dev *pdev, .min_width = 320, .min_height = 240, }; + struct i2c_board_info ov7670_info = { + .type = "ov7670", + .addr = 0x42, + .platform_data = &sensor_cfg, + }; /* * Start putting together one of our big camera structures. @@ -2062,9 +2067,9 @@ static int cafe_pci_probe(struct pci_dev *pdev, if (dmi_check_system(olpc_xo1_dmi)) sensor_cfg.clock_speed = 45; - cam->sensor_addr = 0x42; - cam->sensor = v4l2_i2c_new_subdev_cfg(&cam->v4l2_dev, &cam->i2c_adapter, - "ov7670", 0, &sensor_cfg, cam->sensor_addr, NULL); + cam->sensor_addr = ov7670_info.addr; + cam->sensor = v4l2_i2c_new_subdev_board(&cam->v4l2_dev, &cam->i2c_adapter, + &ov7670_info, NULL); if (cam->sensor == NULL) { ret = -ENODEV; goto out_smbus; diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index f16461844c5c..6fc09dd41b9d 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -1682,20 +1682,6 @@ static int cx25840_log_status(struct v4l2_subdev *sd) return 0; } -static int cx25840_s_config(struct v4l2_subdev *sd, int irq, void *platform_data) -{ - struct cx25840_state *state = to_state(sd); - struct i2c_client *client = v4l2_get_subdevdata(sd); - - if (platform_data) { - struct cx25840_platform_data *pdata = platform_data; - - state->pvr150_workaround = pdata->pvr150_workaround; - set_input(client, state->vid_input, state->aud_input); - } - return 0; -} - static int cx23885_irq_handler(struct v4l2_subdev *sd, u32 status, bool *handled) { @@ -1787,7 +1773,6 @@ static const struct v4l2_ctrl_ops cx25840_ctrl_ops = { static const struct v4l2_subdev_core_ops cx25840_core_ops = { .log_status = cx25840_log_status, - .s_config = cx25840_s_config, .g_chip_ident = cx25840_g_chip_ident, .g_ctrl = v4l2_subdev_g_ctrl, .s_ctrl = v4l2_subdev_s_ctrl, @@ -1974,7 +1959,6 @@ static int cx25840_probe(struct i2c_client *client, state->vid_input = CX25840_COMPOSITE7; state->aud_input = CX25840_AUDIO8; state->audclk_freq = 48000; - state->pvr150_workaround = 0; state->audmode = V4L2_TUNER_MODE_LANG1; state->vbi_line_offset = 8; state->id = id; @@ -2034,6 +2018,12 @@ static int cx25840_probe(struct i2c_client *client, v4l2_ctrl_cluster(2, &state->volume); v4l2_ctrl_handler_setup(&state->hdl); + if (client->dev.platform_data) { + struct cx25840_platform_data *pdata = client->dev.platform_data; + + state->pvr150_workaround = pdata->pvr150_workaround; + } + cx25840_ir_probe(sd); return 0; } diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index ba03a448b41d..87f77a34eeab 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -1917,11 +1918,6 @@ static unsigned short tvp5150_addrs[] = { I2C_CLIENT_END }; -static unsigned short mt9v011_addrs[] = { - 0xba >> 1, - I2C_CLIENT_END -}; - static unsigned short msp3400_addrs[] = { 0x80 >> 1, 0x88 >> 1, @@ -2624,11 +2620,17 @@ void em28xx_card_setup(struct em28xx *dev) "tvp5150", 0, tvp5150_addrs); if (dev->em28xx_sensor == EM28XX_MT9V011) { + struct mt9v011_platform_data pdata; + struct i2c_board_info mt9v011_info = { + .type = "mt9v011", + .addr = 0xba >> 1, + .platform_data = &pdata, + }; struct v4l2_subdev *sd; - sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, - &dev->i2c_adap, "mt9v011", 0, mt9v011_addrs); - v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal); + pdata.xtal = dev->sensor_xtal; + sd = v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap, + &mt9v011_info, NULL); } diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c index e103b8fc7452..9fb86a081c0f 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.c +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -300,10 +300,15 @@ int ivtv_i2c_register(struct ivtv *itv, unsigned idx) adap, type, 0, I2C_ADDRS(hw_addrs[idx])); } else if (hw == IVTV_HW_CX25840) { struct cx25840_platform_data pdata; + struct i2c_board_info cx25840_info = { + .type = "cx25840", + .addr = hw_addrs[idx], + .platform_data = &pdata, + }; pdata.pvr150_workaround = itv->pvr150_workaround; - sd = v4l2_i2c_new_subdev_cfg(&itv->v4l2_dev, - adap, type, 0, &pdata, hw_addrs[idx], NULL); + sd = v4l2_i2c_new_subdev_board(&itv->v4l2_dev, adap, + &cx25840_info, NULL); } else { sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, hw_addrs[idx], NULL); diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c index 209ff97261a9..4904d25f689f 100644 --- a/drivers/media/video/mt9v011.c +++ b/drivers/media/video/mt9v011.c @@ -12,17 +12,41 @@ #include #include #include -#include "mt9v011.h" +#include MODULE_DESCRIPTION("Micron mt9v011 sensor driver"); MODULE_AUTHOR("Mauro Carvalho Chehab "); MODULE_LICENSE("GPL"); - static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-2)"); +#define R00_MT9V011_CHIP_VERSION 0x00 +#define R01_MT9V011_ROWSTART 0x01 +#define R02_MT9V011_COLSTART 0x02 +#define R03_MT9V011_HEIGHT 0x03 +#define R04_MT9V011_WIDTH 0x04 +#define R05_MT9V011_HBLANK 0x05 +#define R06_MT9V011_VBLANK 0x06 +#define R07_MT9V011_OUT_CTRL 0x07 +#define R09_MT9V011_SHUTTER_WIDTH 0x09 +#define R0A_MT9V011_CLK_SPEED 0x0a +#define R0B_MT9V011_RESTART 0x0b +#define R0C_MT9V011_SHUTTER_DELAY 0x0c +#define R0D_MT9V011_RESET 0x0d +#define R1E_MT9V011_DIGITAL_ZOOM 0x1e +#define R20_MT9V011_READ_MODE 0x20 +#define R2B_MT9V011_GREEN_1_GAIN 0x2b +#define R2C_MT9V011_BLUE_GAIN 0x2c +#define R2D_MT9V011_RED_GAIN 0x2d +#define R2E_MT9V011_GREEN_2_GAIN 0x2e +#define R35_MT9V011_GLOBAL_GAIN 0x35 +#define RF1_MT9V011_CHIP_ENABLE 0xf1 + +#define MT9V011_VERSION 0x8232 +#define MT9V011_REV_B_VERSION 0x8243 + /* supported controls */ static struct v4l2_queryctrl mt9v011_qctrl[] = { { @@ -469,23 +493,6 @@ static int mt9v011_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt return 0; } -static int mt9v011_s_config(struct v4l2_subdev *sd, int dumb, void *data) -{ - struct mt9v011 *core = to_mt9v011(sd); - unsigned *xtal = data; - - v4l2_dbg(1, debug, sd, "s_config called\n"); - - if (xtal) { - core->xtal = *xtal; - v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n", - *xtal / 1000000, (*xtal / 1000) % 1000); - } - - return 0; -} - - #ifdef CONFIG_VIDEO_ADV_DEBUG static int mt9v011_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) @@ -536,7 +543,6 @@ static const struct v4l2_subdev_core_ops mt9v011_core_ops = { .g_ctrl = mt9v011_g_ctrl, .s_ctrl = mt9v011_s_ctrl, .reset = mt9v011_reset, - .s_config = mt9v011_s_config, .g_chip_ident = mt9v011_g_chip_ident, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = mt9v011_g_register, @@ -596,6 +602,14 @@ static int mt9v011_probe(struct i2c_client *c, core->height = 480; core->xtal = 27000000; /* Hz */ + if (c->dev.platform_data) { + struct mt9v011_platform_data *pdata = c->dev.platform_data; + + core->xtal = pdata->xtal; + v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n", + core->xtal / 1000000, (core->xtal / 1000) % 1000); + } + v4l_info(c, "chip found @ 0x%02x (%s - chip version 0x%04x)\n", c->addr << 1, c->adapter->name, version); diff --git a/drivers/media/video/mt9v011.h b/drivers/media/video/mt9v011.h deleted file mode 100644 index 3350fd6083c3..000000000000 --- a/drivers/media/video/mt9v011.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor - * - * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) - * This code is placed under the terms of the GNU General Public License v2 - */ - -#ifndef MT9V011_H_ -#define MT9V011_H_ - -#define R00_MT9V011_CHIP_VERSION 0x00 -#define R01_MT9V011_ROWSTART 0x01 -#define R02_MT9V011_COLSTART 0x02 -#define R03_MT9V011_HEIGHT 0x03 -#define R04_MT9V011_WIDTH 0x04 -#define R05_MT9V011_HBLANK 0x05 -#define R06_MT9V011_VBLANK 0x06 -#define R07_MT9V011_OUT_CTRL 0x07 -#define R09_MT9V011_SHUTTER_WIDTH 0x09 -#define R0A_MT9V011_CLK_SPEED 0x0a -#define R0B_MT9V011_RESTART 0x0b -#define R0C_MT9V011_SHUTTER_DELAY 0x0c -#define R0D_MT9V011_RESET 0x0d -#define R1E_MT9V011_DIGITAL_ZOOM 0x1e -#define R20_MT9V011_READ_MODE 0x20 -#define R2B_MT9V011_GREEN_1_GAIN 0x2b -#define R2C_MT9V011_BLUE_GAIN 0x2c -#define R2D_MT9V011_RED_GAIN 0x2d -#define R2E_MT9V011_GREEN_2_GAIN 0x2e -#define R35_MT9V011_GLOBAL_GAIN 0x35 -#define RF1_MT9V011_CHIP_ENABLE 0xf1 - -#define MT9V011_VERSION 0x8232 -#define MT9V011_REV_B_VERSION 0x8243 - -#endif diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c index c881a64b41fd..d4e7c11553c3 100644 --- a/drivers/media/video/ov7670.c +++ b/drivers/media/video/ov7670.c @@ -1449,47 +1449,6 @@ static int ov7670_g_chip_ident(struct v4l2_subdev *sd, return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_OV7670, 0); } -static int ov7670_s_config(struct v4l2_subdev *sd, int dumb, void *data) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct ov7670_config *config = data; - struct ov7670_info *info = to_state(sd); - int ret; - - info->clock_speed = 30; /* default: a guess */ - - /* - * Must apply configuration before initializing device, because it - * selects I/O method. - */ - if (config) { - info->min_width = config->min_width; - info->min_height = config->min_height; - info->use_smbus = config->use_smbus; - - if (config->clock_speed) - info->clock_speed = config->clock_speed; - } - - /* Make sure it's an ov7670 */ - ret = ov7670_detect(sd); - if (ret) { - v4l_dbg(1, debug, client, - "chip found @ 0x%x (%s) is not an ov7670 chip.\n", - client->addr << 1, client->adapter->name); - kfree(info); - return ret; - } - v4l_info(client, "chip found @ 0x%02x (%s)\n", - client->addr << 1, client->adapter->name); - - info->fmt = &ov7670_formats[0]; - info->sat = 128; /* Review this */ - info->clkrc = info->clock_speed / 30; - - return 0; -} - #ifdef CONFIG_VIDEO_ADV_DEBUG static int ov7670_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) { @@ -1528,7 +1487,6 @@ static const struct v4l2_subdev_core_ops ov7670_core_ops = { .s_ctrl = ov7670_s_ctrl, .queryctrl = ov7670_queryctrl, .reset = ov7670_reset, - .s_config = ov7670_s_config, .init = ov7670_init, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = ov7670_g_register, @@ -1558,6 +1516,7 @@ static int ov7670_probe(struct i2c_client *client, { struct v4l2_subdev *sd; struct ov7670_info *info; + int ret; info = kzalloc(sizeof(struct ov7670_info), GFP_KERNEL); if (info == NULL) @@ -1565,6 +1524,37 @@ static int ov7670_probe(struct i2c_client *client, sd = &info->sd; v4l2_i2c_subdev_init(sd, client, &ov7670_ops); + info->clock_speed = 30; /* default: a guess */ + if (client->dev.platform_data) { + struct ov7670_config *config = client->dev.platform_data; + + /* + * Must apply configuration before initializing device, because it + * selects I/O method. + */ + info->min_width = config->min_width; + info->min_height = config->min_height; + info->use_smbus = config->use_smbus; + + if (config->clock_speed) + info->clock_speed = config->clock_speed; + } + + /* Make sure it's an ov7670 */ + ret = ov7670_detect(sd); + if (ret) { + v4l_dbg(1, debug, client, + "chip found @ 0x%x (%s) is not an ov7670 chip.\n", + client->addr << 1, client->adapter->name); + kfree(info); + return ret; + } + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + info->fmt = &ov7670_formats[0]; + info->sat = 128; /* Review this */ + info->clkrc = info->clock_speed / 30; return 0; } diff --git a/drivers/media/video/sr030pc30.c b/drivers/media/video/sr030pc30.c index 864696b7a006..c901721a1db3 100644 --- a/drivers/media/video/sr030pc30.c +++ b/drivers/media/video/sr030pc30.c @@ -714,15 +714,6 @@ static int sr030pc30_base_config(struct v4l2_subdev *sd) return ret; } -static int sr030pc30_s_config(struct v4l2_subdev *sd, - int irq, void *platform_data) -{ - struct sr030pc30_info *info = to_sr030pc30(sd); - - info->pdata = platform_data; - return 0; -} - static int sr030pc30_s_stream(struct v4l2_subdev *sd, int enable) { return 0; @@ -763,7 +754,6 @@ static int sr030pc30_s_power(struct v4l2_subdev *sd, int on) } static const struct v4l2_subdev_core_ops sr030pc30_core_ops = { - .s_config = sr030pc30_s_config, .s_power = sr030pc30_s_power, .queryctrl = sr030pc30_queryctrl, .s_ctrl = sr030pc30_s_ctrl, diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 3f0871b550ad..810eef43c216 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -407,18 +407,6 @@ struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, /* Decrease the module use count to match the first try_module_get. */ module_put(client->driver->driver.owner); - if (sd) { - /* We return errors from v4l2_subdev_call only if we have the - callback as the .s_config is not mandatory */ - int err = v4l2_subdev_call(sd, core, s_config, - info->irq, info->platform_data); - - if (err && err != -ENOIOCTLCMD) { - v4l2_device_unregister_subdev(sd); - sd = NULL; - } - } - error: /* If we have a client but no subdev, then something went wrong and we must unregister the client. */ @@ -428,9 +416,8 @@ error: } EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_board); -struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, +struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, struct i2c_adapter *adapter, const char *client_type, - int irq, void *platform_data, u8 addr, const unsigned short *probe_addrs) { struct i2c_board_info info; @@ -440,12 +427,10 @@ struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, memset(&info, 0, sizeof(info)); strlcpy(info.type, client_type, sizeof(info.type)); info.addr = addr; - info.irq = irq; - info.platform_data = platform_data; return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, &info, probe_addrs); } -EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_cfg); +EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev); /* Return i2c client address of v4l2_subdev. */ unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd) -- cgit v1.2.1 From 45f6f84af3ae9db19f39bc5d0976d626b0ef626e Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 8 Jan 2011 07:15:53 -0300 Subject: [media] v4l2-subdev: add (un)register internal ops Some subdevs need to call into the board code after they are registered and have a valid struct v4l2_device pointer. The s_config op was abused for this, but now that it is removed we need a cleaner way of solving this. So this patch adds a struct with internal ops that the v4l2 core can call. Currently only two ops exist: register and unregister. Subdevs can implement these to call the board code and pass it the v4l2_device pointer, which the board code can then use to get access to the struct that embeds the v4l2_device. It is expected that in the future open and close ops will also be added. Signed-off-by: Hans Verkuil Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-device.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c index 7fe6f92af480..b24f002ffa67 100644 --- a/drivers/media/video/v4l2-device.c +++ b/drivers/media/video/v4l2-device.c @@ -126,11 +126,19 @@ int v4l2_device_register_subdev(struct v4l2_device *v4l2_dev, WARN_ON(sd->v4l2_dev != NULL); if (!try_module_get(sd->owner)) return -ENODEV; + sd->v4l2_dev = v4l2_dev; + if (sd->internal_ops && sd->internal_ops->registered) { + err = sd->internal_ops->registered(sd); + if (err) + return err; + } /* This just returns 0 if either of the two args is NULL */ err = v4l2_ctrl_add_handler(v4l2_dev->ctrl_handler, sd->ctrl_handler); - if (err) + if (err) { + if (sd->internal_ops && sd->internal_ops->unregistered) + sd->internal_ops->unregistered(sd); return err; - sd->v4l2_dev = v4l2_dev; + } spin_lock(&v4l2_dev->lock); list_add_tail(&sd->list, &v4l2_dev->subdevs); spin_unlock(&v4l2_dev->lock); @@ -146,6 +154,8 @@ void v4l2_device_unregister_subdev(struct v4l2_subdev *sd) spin_lock(&sd->v4l2_dev->lock); list_del(&sd->list); spin_unlock(&sd->v4l2_dev->lock); + if (sd->internal_ops && sd->internal_ops->unregistered) + sd->internal_ops->unregistered(sd); sd->v4l2_dev = NULL; module_put(sd->owner); } -- cgit v1.2.1 From 2a863793beaa0fc9ee7aeb87efe85544a6b129c0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 11 Jan 2011 14:45:03 -0300 Subject: [media] v4l2-ctrls: v4l2_ctrl_handler_setup must set is_new to 1 Renamed has_new to is_new. Drivers can use the is_new field to determine if a new value was specified for a control. The v4l2_ctrl_handler_setup() must always set this to 1 since the setup has to force a full update of all controls. Signed-off-by: Hans Verkuil Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ctrls.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index 8f81efcfcf56..0d1a3d831374 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -569,7 +569,7 @@ static int user_to_new(struct v4l2_ext_control *c, int ret; u32 size; - ctrl->has_new = 1; + ctrl->is_new = 1; switch (ctrl->type) { case V4L2_CTRL_TYPE_INTEGER64: ctrl->val64 = c->value64; @@ -1280,8 +1280,12 @@ int v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl) if (ctrl->done) continue; - for (i = 0; i < master->ncontrols; i++) - cur_to_new(master->cluster[i]); + for (i = 0; i < master->ncontrols; i++) { + if (master->cluster[i]) { + cur_to_new(master->cluster[i]); + master->cluster[i]->is_new = 1; + } + } /* Skip button controls and read-only controls. */ if (ctrl->type == V4L2_CTRL_TYPE_BUTTON || @@ -1645,7 +1649,7 @@ static int try_or_set_control_cluster(struct v4l2_ctrl *master, bool set) if (ctrl == NULL) continue; - if (ctrl->has_new) { + if (ctrl->is_new) { /* Double check this: it may have changed since the last check in try_or_set_ext_ctrls(). */ if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED)) @@ -1719,13 +1723,13 @@ static int try_or_set_ext_ctrls(struct v4l2_ctrl_handler *hdl, v4l2_ctrl_lock(ctrl); - /* Reset the 'has_new' flags of the cluster */ + /* Reset the 'is_new' flags of the cluster */ for (j = 0; j < master->ncontrols; j++) if (master->cluster[j]) - master->cluster[j]->has_new = 0; + master->cluster[j]->is_new = 0; /* Copy the new caller-supplied control values. - user_to_new() sets 'has_new' to 1. */ + user_to_new() sets 'is_new' to 1. */ ret = cluster_walk(i, cs, helpers, user_to_new); if (!ret) @@ -1822,13 +1826,13 @@ static int set_ctrl(struct v4l2_ctrl *ctrl, s32 *val) v4l2_ctrl_lock(ctrl); - /* Reset the 'has_new' flags of the cluster */ + /* Reset the 'is_new' flags of the cluster */ for (i = 0; i < master->ncontrols; i++) if (master->cluster[i]) - master->cluster[i]->has_new = 0; + master->cluster[i]->is_new = 0; ctrl->val = *val; - ctrl->has_new = 1; + ctrl->is_new = 1; ret = try_or_set_control_cluster(master, false); if (!ret) ret = try_or_set_control_cluster(master, true); -- cgit v1.2.1 From 0beb6714e787ae46e1c1fc5e275452c1950ad141 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= Date: Thu, 13 Jan 2011 04:44:02 -0300 Subject: [media] gspca: Version change MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 3581dea3c1f7..f21f2a258ae0 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -55,7 +55,7 @@ MODULE_AUTHOR("Jean-François Moine "); MODULE_DESCRIPTION("GSPCA USB Camera Driver"); MODULE_LICENSE("GPL"); -#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 11, 0) +#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 12, 0) #ifdef GSPCA_DEBUG int gspca_debug = D_ERR | D_PROBE; -- cgit v1.2.1 From 95c967c167785eb991cf6b22fb854dd8d61d0ff8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= Date: Thu, 13 Jan 2011 05:20:29 -0300 Subject: [media] gspca: Remove __devinit, __devinitconst and __devinitdata MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit __devinit* must not be used in USB drivers. Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/benq.c | 2 +- drivers/media/video/gspca/conex.c | 4 ++-- drivers/media/video/gspca/cpia1.c | 2 +- drivers/media/video/gspca/etoms.c | 4 ++-- drivers/media/video/gspca/finepix.c | 2 +- drivers/media/video/gspca/gl860/gl860.c | 2 +- drivers/media/video/gspca/jeilinj.c | 2 +- drivers/media/video/gspca/konica.c | 2 +- drivers/media/video/gspca/m5602/m5602_core.c | 2 +- drivers/media/video/gspca/mars.c | 2 +- drivers/media/video/gspca/mr97310a.c | 2 +- drivers/media/video/gspca/ov519.c | 2 +- drivers/media/video/gspca/ov534.c | 2 +- drivers/media/video/gspca/ov534_9.c | 2 +- drivers/media/video/gspca/pac207.c | 2 +- drivers/media/video/gspca/pac7302.c | 4 ++-- drivers/media/video/gspca/pac7311.c | 4 ++-- drivers/media/video/gspca/sn9c2028.c | 2 +- drivers/media/video/gspca/sn9c20x.c | 2 +- drivers/media/video/gspca/sonixb.c | 4 ++-- drivers/media/video/gspca/sonixj.c | 2 +- drivers/media/video/gspca/spca1528.c | 2 +- drivers/media/video/gspca/spca500.c | 2 +- drivers/media/video/gspca/spca501.c | 2 +- drivers/media/video/gspca/spca505.c | 2 +- drivers/media/video/gspca/spca508.c | 2 +- drivers/media/video/gspca/spca561.c | 2 +- drivers/media/video/gspca/sq905.c | 2 +- drivers/media/video/gspca/sq905c.c | 2 +- drivers/media/video/gspca/sq930x.c | 2 +- drivers/media/video/gspca/stk014.c | 2 +- drivers/media/video/gspca/stv0680.c | 2 +- drivers/media/video/gspca/stv06xx/stv06xx.c | 2 +- drivers/media/video/gspca/sunplus.c | 2 +- drivers/media/video/gspca/t613.c | 2 +- drivers/media/video/gspca/tv8532.c | 2 +- drivers/media/video/gspca/vc032x.c | 2 +- drivers/media/video/gspca/xirlink_cit.c | 2 +- drivers/media/video/gspca/zc3xx.c | 2 +- 39 files changed, 44 insertions(+), 44 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/benq.c b/drivers/media/video/gspca/benq.c index 629043933501..a09c4709d613 100644 --- a/drivers/media/video/gspca/benq.c +++ b/drivers/media/video/gspca/benq.c @@ -276,7 +276,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x04a5, 0x3035)}, {} }; diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c index 1eacb6c7926d..8b398493f96b 100644 --- a/drivers/media/video/gspca/conex.c +++ b/drivers/media/video/gspca/conex.c @@ -1040,14 +1040,14 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const struct usb_device_id device_table[] __devinitconst = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0572, 0x0041)}, {} }; MODULE_DEVICE_TABLE(usb, device_table); /* -- device connect -- */ -static int __devinit sd_probe(struct usb_interface *intf, +static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), diff --git a/drivers/media/video/gspca/cpia1.c b/drivers/media/video/gspca/cpia1.c index c1ae05f4661f..4bf2cab98d64 100644 --- a/drivers/media/video/gspca/cpia1.c +++ b/drivers/media/video/gspca/cpia1.c @@ -2088,7 +2088,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0553, 0x0002)}, {USB_DEVICE(0x0813, 0x0001)}, {} diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c index a594b36d6199..4b2c483fce6f 100644 --- a/drivers/media/video/gspca/etoms.c +++ b/drivers/media/video/gspca/etoms.c @@ -864,7 +864,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const struct usb_device_id device_table[] __devinitconst = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x102c, 0x6151), .driver_info = SENSOR_PAS106}, #if !defined CONFIG_USB_ET61X251 && !defined CONFIG_USB_ET61X251_MODULE {USB_DEVICE(0x102c, 0x6251), .driver_info = SENSOR_TAS5130CXX}, @@ -875,7 +875,7 @@ static const struct usb_device_id device_table[] __devinitconst = { MODULE_DEVICE_TABLE(usb, device_table); /* -- device connect -- */ -static int __devinit sd_probe(struct usb_interface *intf, +static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), diff --git a/drivers/media/video/gspca/finepix.c b/drivers/media/video/gspca/finepix.c index d78226455d1f..987b4b69d7ab 100644 --- a/drivers/media/video/gspca/finepix.c +++ b/drivers/media/video/gspca/finepix.c @@ -229,7 +229,7 @@ static void sd_stop0(struct gspca_dev *gspca_dev) } /* Table of supported USB devices */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x04cb, 0x0104)}, {USB_DEVICE(0x04cb, 0x0109)}, {USB_DEVICE(0x04cb, 0x010b)}, diff --git a/drivers/media/video/gspca/gl860/gl860.c b/drivers/media/video/gspca/gl860/gl860.c index b05bec7321b5..99083038cec3 100644 --- a/drivers/media/video/gspca/gl860/gl860.c +++ b/drivers/media/video/gspca/gl860/gl860.c @@ -488,7 +488,7 @@ static void sd_callback(struct gspca_dev *gspca_dev) /*=================== USB driver structure initialisation ==================*/ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x05e3, 0x0503)}, {USB_DEVICE(0x05e3, 0xf191)}, {} diff --git a/drivers/media/video/gspca/jeilinj.c b/drivers/media/video/gspca/jeilinj.c index a35e87bb0388..06b777f5379e 100644 --- a/drivers/media/video/gspca/jeilinj.c +++ b/drivers/media/video/gspca/jeilinj.c @@ -314,7 +314,7 @@ static int sd_start(struct gspca_dev *gspca_dev) } /* Table of supported USB devices */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0979, 0x0280)}, {} }; diff --git a/drivers/media/video/gspca/konica.c b/drivers/media/video/gspca/konica.c index d2ce65dcbfdc..5964691c0e95 100644 --- a/drivers/media/video/gspca/konica.c +++ b/drivers/media/video/gspca/konica.c @@ -607,7 +607,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x04c8, 0x0720)}, /* Intel YC 76 */ {} }; diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c index c872b93a3351..a7722b1aef9b 100644 --- a/drivers/media/video/gspca/m5602/m5602_core.c +++ b/drivers/media/video/gspca/m5602/m5602_core.c @@ -28,7 +28,7 @@ int force_sensor; static int dump_bridge; int dump_sensor; -static const __devinitdata struct usb_device_id m5602_table[] = { +static const struct usb_device_id m5602_table[] = { {USB_DEVICE(0x0402, 0x5602)}, {} }; diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c index a81536e78698..cb4d0bf0d784 100644 --- a/drivers/media/video/gspca/mars.c +++ b/drivers/media/video/gspca/mars.c @@ -490,7 +490,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x050f)}, {} }; diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/video/gspca/mr97310a.c index 7607a288b51c..3884c9d300c5 100644 --- a/drivers/media/video/gspca/mr97310a.c +++ b/drivers/media/video/gspca/mr97310a.c @@ -1229,7 +1229,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x08ca, 0x0110)}, /* Trust Spyc@m 100 */ {USB_DEVICE(0x08ca, 0x0111)}, /* Aiptek Pencam VGA+ */ {USB_DEVICE(0x093a, 0x010f)}, /* All other known MR97310A VGA cams */ diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index e1c3b9328ace..e30791f05690 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -4747,7 +4747,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x4003), .driver_info = BRIDGE_W9968CF }, {USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 }, diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c index 0edf93973b1c..ba8e56c3fc83 100644 --- a/drivers/media/video/gspca/ov534.c +++ b/drivers/media/video/gspca/ov534.c @@ -1289,7 +1289,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x1415, 0x2000)}, {} }; diff --git a/drivers/media/video/gspca/ov534_9.c b/drivers/media/video/gspca/ov534_9.c index c5244b4b4777..aaf5428c57f5 100644 --- a/drivers/media/video/gspca/ov534_9.c +++ b/drivers/media/video/gspca/ov534_9.c @@ -1429,7 +1429,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x06f8, 0x3003)}, {} }; diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c index 96f9986305b4..81739a2f205e 100644 --- a/drivers/media/video/gspca/pac207.c +++ b/drivers/media/video/gspca/pac207.c @@ -530,7 +530,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x4028)}, {USB_DEVICE(0x093a, 0x2460)}, {USB_DEVICE(0x093a, 0x2461)}, diff --git a/drivers/media/video/gspca/pac7302.c b/drivers/media/video/gspca/pac7302.c index 2700975abce5..5615d7bd8304 100644 --- a/drivers/media/video/gspca/pac7302.c +++ b/drivers/media/video/gspca/pac7302.c @@ -1184,7 +1184,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const struct usb_device_id device_table[] __devinitconst = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x06f8, 0x3009)}, {USB_DEVICE(0x093a, 0x2620)}, {USB_DEVICE(0x093a, 0x2621)}, @@ -1201,7 +1201,7 @@ static const struct usb_device_id device_table[] __devinitconst = { MODULE_DEVICE_TABLE(usb, device_table); /* -- device connect -- */ -static int __devinit sd_probe(struct usb_interface *intf, +static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 6820f5d58b19..f8801b50e64f 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -837,7 +837,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const struct usb_device_id device_table[] __devinitconst = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x2600)}, {USB_DEVICE(0x093a, 0x2601)}, {USB_DEVICE(0x093a, 0x2603)}, @@ -849,7 +849,7 @@ static const struct usb_device_id device_table[] __devinitconst = { MODULE_DEVICE_TABLE(usb, device_table); /* -- device connect -- */ -static int __devinit sd_probe(struct usb_interface *intf, +static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), diff --git a/drivers/media/video/gspca/sn9c2028.c b/drivers/media/video/gspca/sn9c2028.c index 40a06680502d..4271f86dfe01 100644 --- a/drivers/media/video/gspca/sn9c2028.c +++ b/drivers/media/video/gspca/sn9c2028.c @@ -703,7 +703,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0458, 0x7005)}, /* Genius Smart 300, version 2 */ /* The Genius Smart is untested. I can't find an owner ! */ /* {USB_DEVICE(0x0c45, 0x8000)}, DC31VC, Don't know this camera */ diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c index cb08d00d0a31..fcf29897b713 100644 --- a/drivers/media/video/gspca/sn9c20x.c +++ b/drivers/media/video/gspca/sn9c20x.c @@ -2470,7 +2470,7 @@ static const struct sd_desc sd_desc = { | (SENSOR_ ## sensor << 8) \ | (i2c_addr) -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x6240), SN9C20X(MT9M001, 0x5d, 0)}, {USB_DEVICE(0x0c45, 0x6242), SN9C20X(MT9M111, 0x5d, 0)}, {USB_DEVICE(0x0c45, 0x6248), SN9C20X(OV9655, 0x30, 0)}, diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index e45d1cfb4461..c6cd68d66b53 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -1565,7 +1565,7 @@ static const struct sd_desc sd_desc = { .driver_info = (SENSOR_ ## sensor << 8) | BRIDGE_ ## bridge -static const struct usb_device_id device_table[] __devinitconst = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x6001), SB(TAS5110C, 102)}, /* TAS5110C1B */ {USB_DEVICE(0x0c45, 0x6005), SB(TAS5110C, 101)}, /* TAS5110C1B */ {USB_DEVICE(0x0c45, 0x6007), SB(TAS5110D, 101)}, /* TAS5110D */ @@ -1599,7 +1599,7 @@ static const struct usb_device_id device_table[] __devinitconst = { MODULE_DEVICE_TABLE(usb, device_table); /* -- device connect -- */ -static int __devinit sd_probe(struct usb_interface *intf, +static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index db35391d00e6..3e41653f11c1 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -2909,7 +2909,7 @@ static const struct sd_desc sd_desc = { .driver_info = (BRIDGE_ ## bridge << 16) \ | (SENSOR_ ## sensor << 8) \ | (flags) -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)}, {USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)}, {USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, PDN_INV)}, diff --git a/drivers/media/video/gspca/spca1528.c b/drivers/media/video/gspca/spca1528.c index e64338664410..76c006b2bc83 100644 --- a/drivers/media/video/gspca/spca1528.c +++ b/drivers/media/video/gspca/spca1528.c @@ -555,7 +555,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x04fc, 0x1528)}, {} }; diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c index 8e202b9039f1..45552c3ff8d9 100644 --- a/drivers/media/video/gspca/spca500.c +++ b/drivers/media/video/gspca/spca500.c @@ -1051,7 +1051,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x040a, 0x0300), .driver_info = KodakEZ200}, {USB_DEVICE(0x041e, 0x400a), .driver_info = CreativePCCam300}, {USB_DEVICE(0x046d, 0x0890), .driver_info = LogitechTraveler}, diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c index 642839a11e8d..f7ef282cc600 100644 --- a/drivers/media/video/gspca/spca501.c +++ b/drivers/media/video/gspca/spca501.c @@ -2155,7 +2155,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x040a, 0x0002), .driver_info = KodakDVC325}, {USB_DEVICE(0x0497, 0xc001), .driver_info = SmileIntlCamera}, {USB_DEVICE(0x0506, 0x00df), .driver_info = ThreeComHomeConnectLite}, diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c index bc9dd9034ab4..e5bf865147d7 100644 --- a/drivers/media/video/gspca/spca505.c +++ b/drivers/media/video/gspca/spca505.c @@ -786,7 +786,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x401d), .driver_info = Nxultra}, {USB_DEVICE(0x0733, 0x0430), .driver_info = IntelPCCameraPro}, /*fixme: may be UsbGrabberPV321 BRIDGE_SPCA506 SENSOR_SAA7113 */ diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c index 7307638ac91d..348319371523 100644 --- a/drivers/media/video/gspca/spca508.c +++ b/drivers/media/video/gspca/spca508.c @@ -1509,7 +1509,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0130, 0x0130), .driver_info = HamaUSBSightcam}, {USB_DEVICE(0x041e, 0x4018), .driver_info = CreativeVista}, {USB_DEVICE(0x0733, 0x0110), .driver_info = ViewQuestVQ110}, diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index 3a162c6d5466..e836e778dfb6 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -1061,7 +1061,7 @@ static const struct sd_desc *sd_desc[2] = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x401a), .driver_info = Rev072A}, {USB_DEVICE(0x041e, 0x403b), .driver_info = Rev012A}, {USB_DEVICE(0x0458, 0x7004), .driver_info = Rev072A}, diff --git a/drivers/media/video/gspca/sq905.c b/drivers/media/video/gspca/sq905.c index 404067745775..2e9c06175192 100644 --- a/drivers/media/video/gspca/sq905.c +++ b/drivers/media/video/gspca/sq905.c @@ -396,7 +396,7 @@ static int sd_start(struct gspca_dev *gspca_dev) } /* Table of supported USB devices */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x2770, 0x9120)}, {} }; diff --git a/drivers/media/video/gspca/sq905c.c b/drivers/media/video/gspca/sq905c.c index 8ba199543856..457563b7a71b 100644 --- a/drivers/media/video/gspca/sq905c.c +++ b/drivers/media/video/gspca/sq905c.c @@ -298,7 +298,7 @@ static int sd_start(struct gspca_dev *gspca_dev) } /* Table of supported USB devices */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x2770, 0x905c)}, {USB_DEVICE(0x2770, 0x9050)}, {USB_DEVICE(0x2770, 0x9051)}, diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/video/gspca/sq930x.c index a4a98811b9e3..8215d5dcd456 100644 --- a/drivers/media/video/gspca/sq930x.c +++ b/drivers/media/video/gspca/sq930x.c @@ -1163,7 +1163,7 @@ static const struct sd_desc sd_desc = { #define ST(sensor, type) \ .driver_info = (SENSOR_ ## sensor << 8) \ | (type) -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x4038), ST(MI0360, 0)}, {USB_DEVICE(0x041e, 0x403c), ST(LZ24BP, 0)}, {USB_DEVICE(0x041e, 0x403d), ST(LZ24BP, 0)}, diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c index 11a192b95ed4..87be52b5e1e3 100644 --- a/drivers/media/video/gspca/stk014.c +++ b/drivers/media/video/gspca/stk014.c @@ -495,7 +495,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x05e1, 0x0893)}, {} }; diff --git a/drivers/media/video/gspca/stv0680.c b/drivers/media/video/gspca/stv0680.c index b199ad4666bd..e2ef41cf72d7 100644 --- a/drivers/media/video/gspca/stv0680.c +++ b/drivers/media/video/gspca/stv0680.c @@ -327,7 +327,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0553, 0x0202)}, {USB_DEVICE(0x041e, 0x4007)}, {} diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c index 28ea4175b80e..7e0661429293 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx.c +++ b/drivers/media/video/gspca/stv06xx/stv06xx.c @@ -564,7 +564,7 @@ static int stv06xx_config(struct gspca_dev *gspca_dev, /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { /* QuickCam Express */ {USB_DEVICE(0x046d, 0x0840), .driver_info = BRIDGE_STV600 }, /* LEGO cam / QuickCam Web */ diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index a9cbcd6011d9..543542af2720 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -1162,7 +1162,7 @@ static const struct sd_desc sd_desc = { #define BS(bridge, subtype) \ .driver_info = (BRIDGE_ ## bridge << 8) \ | (subtype) -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x400b), BS(SPCA504C, 0)}, {USB_DEVICE(0x041e, 0x4012), BS(SPCA504C, 0)}, {USB_DEVICE(0x041e, 0x4013), BS(SPCA504C, 0)}, diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c index 8f0c33116e0d..a3eccd815766 100644 --- a/drivers/media/video/gspca/t613.c +++ b/drivers/media/video/gspca/t613.c @@ -1416,7 +1416,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x17a1, 0x0128)}, {} }; diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c index 38c22f0a4263..933ef2ca658c 100644 --- a/drivers/media/video/gspca/tv8532.c +++ b/drivers/media/video/gspca/tv8532.c @@ -388,7 +388,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x046d, 0x0920)}, {USB_DEVICE(0x046d, 0x0921)}, {USB_DEVICE(0x0545, 0x808b)}, diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index 9b2ae1b6cc75..6caed734a06a 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -4192,7 +4192,7 @@ static const struct sd_desc sd_desc = { #define BF(bridge, flags) \ .driver_info = (BRIDGE_ ## bridge << 8) \ | (flags) -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x405b), BF(VC0323, FL_VFLIP)}, {USB_DEVICE(0x046d, 0x0892), BF(VC0321, 0)}, {USB_DEVICE(0x046d, 0x0896), BF(VC0321, 0)}, diff --git a/drivers/media/video/gspca/xirlink_cit.c b/drivers/media/video/gspca/xirlink_cit.c index 5b5039a02031..c089a0f6f1d0 100644 --- a/drivers/media/video/gspca/xirlink_cit.c +++ b/drivers/media/video/gspca/xirlink_cit.c @@ -3270,7 +3270,7 @@ static const struct sd_desc sd_desc_isoc_nego = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { { USB_DEVICE_VER(0x0545, 0x8080, 0x0001, 0x0001), .driver_info = CIT_MODEL0 }, { USB_DEVICE_VER(0x0545, 0x8080, 0x0002, 0x0002), .driver_info = CIT_MODEL1 }, { USB_DEVICE_VER(0x0545, 0x8080, 0x030a, 0x030a), .driver_info = CIT_MODEL2 }, diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index 14b85d483163..865216e9362c 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -6909,7 +6909,7 @@ static const struct sd_desc sd_desc = { #endif }; -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x041e)}, {USB_DEVICE(0x041e, 0x4017)}, {USB_DEVICE(0x041e, 0x401c), .driver_info = SENSOR_PAS106}, -- cgit v1.2.1 From ded5e903b75a9e2a9349e19063e3b2a63b05e828 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= Date: Thu, 13 Jan 2011 05:27:37 -0300 Subject: [media] gspca: Remove useless instructions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/jpeg.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/jpeg.h b/drivers/media/video/gspca/jpeg.h index de63c36806c0..ab54910418b4 100644 --- a/drivers/media/video/gspca/jpeg.h +++ b/drivers/media/video/gspca/jpeg.h @@ -141,9 +141,9 @@ static void jpeg_define(u8 *jpeg_hdr, memcpy(jpeg_hdr, jpeg_head, sizeof jpeg_head); #ifndef CONEX_CAM jpeg_hdr[JPEG_HEIGHT_OFFSET + 0] = height >> 8; - jpeg_hdr[JPEG_HEIGHT_OFFSET + 1] = height & 0xff; + jpeg_hdr[JPEG_HEIGHT_OFFSET + 1] = height; jpeg_hdr[JPEG_HEIGHT_OFFSET + 2] = width >> 8; - jpeg_hdr[JPEG_HEIGHT_OFFSET + 3] = width & 0xff; + jpeg_hdr[JPEG_HEIGHT_OFFSET + 3] = width; jpeg_hdr[JPEG_HEIGHT_OFFSET + 6] = samplesY; #endif } -- cgit v1.2.1 From fc63de88e0f27ecdaab4d2d836fd7bacab643fc0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= Date: Thu, 13 Jan 2011 05:35:18 -0300 Subject: [media] gspca - ov519: Cleanup source and add a comment MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov519.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index e30791f05690..8ab2c452c25e 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -488,7 +488,6 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = { #define R511_SNAP_PXDIV 0x1c #define R511_SNAP_LNDIV 0x1d #define R511_SNAP_UV_EN 0x1e -#define R511_SNAP_UV_EN 0x1e #define R511_SNAP_OPTS 0x1f #define R511_DRAM_FLOW_CTL 0x20 @@ -1847,8 +1846,7 @@ static const struct ov_i2c_regvals norm_7670[] = { { 0x6c, 0x0a }, { 0x6d, 0x55 }, { 0x6e, 0x11 }, - { 0x6f, 0x9f }, - /* "9e for advance AWB" */ + { 0x6f, 0x9f }, /* "9e for advance AWB" */ { 0x6a, 0x40 }, { OV7670_R01_BLUE, 0x40 }, { OV7670_R02_RED, 0x60 }, @@ -3054,7 +3052,7 @@ static void ov519_configure(struct sd *sd) { static const struct ov_regvals init_519[] = { { 0x5a, 0x6d }, /* EnableSystem */ - { 0x53, 0x9b }, + { 0x53, 0x9b }, /* don't enable the microcontroller */ { OV519_R54_EN_CLK1, 0xff }, /* set bit2 to enable jpeg */ { 0x5d, 0x03 }, { 0x49, 0x01 }, -- cgit v1.2.1 From ddffa49e257e2b28e23f1e2729c0560bcad89937 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= Date: Thu, 13 Jan 2011 05:49:47 -0300 Subject: [media] gspca - ov534: Clearer debug messages MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov534.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c index ba8e56c3fc83..a837f2942a8c 100644 --- a/drivers/media/video/gspca/ov534.c +++ b/drivers/media/video/gspca/ov534.c @@ -479,7 +479,7 @@ static void ov534_reg_write(struct gspca_dev *gspca_dev, u16 reg, u8 val) struct usb_device *udev = gspca_dev->dev; int ret; - PDEBUG(D_USBO, "reg=0x%04x, val=0%02x", reg, val); + PDEBUG(D_USBO, "SET 01 0000 %04x %02x", reg, val); gspca_dev->usb_buf[0] = val; ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), @@ -500,7 +500,7 @@ static u8 ov534_reg_read(struct gspca_dev *gspca_dev, u16 reg) 0x01, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x00, reg, gspca_dev->usb_buf, 1, CTRL_TIMEOUT); - PDEBUG(D_USBI, "reg=0x%04x, data=0x%02x", reg, gspca_dev->usb_buf[0]); + PDEBUG(D_USBI, "GET 01 0000 %04x %02x", reg, gspca_dev->usb_buf[0]); if (ret < 0) err("read failed %d", ret); return gspca_dev->usb_buf[0]; @@ -558,7 +558,7 @@ static int sccb_check_status(struct gspca_dev *gspca_dev) static void sccb_reg_write(struct gspca_dev *gspca_dev, u8 reg, u8 val) { - PDEBUG(D_USBO, "reg: 0x%02x, val: 0x%02x", reg, val); + PDEBUG(D_USBO, "sccb write: %02x %02x", reg, val); ov534_reg_write(gspca_dev, OV534_REG_SUBADDR, reg); ov534_reg_write(gspca_dev, OV534_REG_WRITE, val); ov534_reg_write(gspca_dev, OV534_REG_OPERATION, OV534_OP_WRITE_3); -- cgit v1.2.1 From 14b67c2969ebf50bd5534b2a0c441f8569a9361e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= Date: Thu, 13 Jan 2011 05:58:04 -0300 Subject: [media] gspca - ov534: Propagate errors to higher level MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov534.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c index a837f2942a8c..04da22802736 100644 --- a/drivers/media/video/gspca/ov534.c +++ b/drivers/media/video/gspca/ov534.c @@ -479,6 +479,9 @@ static void ov534_reg_write(struct gspca_dev *gspca_dev, u16 reg, u8 val) struct usb_device *udev = gspca_dev->dev; int ret; + if (gspca_dev->usb_err < 0) + return; + PDEBUG(D_USBO, "SET 01 0000 %04x %02x", reg, val); gspca_dev->usb_buf[0] = val; ret = usb_control_msg(udev, @@ -486,8 +489,10 @@ static void ov534_reg_write(struct gspca_dev *gspca_dev, u16 reg, u8 val) 0x01, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x00, reg, gspca_dev->usb_buf, 1, CTRL_TIMEOUT); - if (ret < 0) + if (ret < 0) { err("write failed %d", ret); + gspca_dev->usb_err = ret; + } } static u8 ov534_reg_read(struct gspca_dev *gspca_dev, u16 reg) @@ -495,14 +500,18 @@ static u8 ov534_reg_read(struct gspca_dev *gspca_dev, u16 reg) struct usb_device *udev = gspca_dev->dev; int ret; + if (gspca_dev->usb_err < 0) + return 0; ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x01, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x00, reg, gspca_dev->usb_buf, 1, CTRL_TIMEOUT); PDEBUG(D_USBI, "GET 01 0000 %04x %02x", reg, gspca_dev->usb_buf[0]); - if (ret < 0) + if (ret < 0) { err("read failed %d", ret); + gspca_dev->usb_err = ret; + } return gspca_dev->usb_buf[0]; } @@ -563,8 +572,10 @@ static void sccb_reg_write(struct gspca_dev *gspca_dev, u8 reg, u8 val) ov534_reg_write(gspca_dev, OV534_REG_WRITE, val); ov534_reg_write(gspca_dev, OV534_REG_OPERATION, OV534_OP_WRITE_3); - if (!sccb_check_status(gspca_dev)) + if (!sccb_check_status(gspca_dev)) { err("sccb_reg_write failed"); + gspca_dev->usb_err = -EIO; + } } static u8 sccb_reg_read(struct gspca_dev *gspca_dev, u16 reg) @@ -885,7 +896,7 @@ static int sd_init(struct gspca_dev *gspca_dev) ov534_set_led(gspca_dev, 0); set_frame_rate(gspca_dev); - return 0; + return gspca_dev->usb_err; } static int sd_start(struct gspca_dev *gspca_dev) @@ -920,7 +931,7 @@ static int sd_start(struct gspca_dev *gspca_dev) ov534_set_led(gspca_dev, 1); ov534_reg_write(gspca_dev, 0xe0, 0x00); - return 0; + return gspca_dev->usb_err; } static void sd_stopN(struct gspca_dev *gspca_dev) -- cgit v1.2.1 From 3afef85bfefa65a31f4dbf8e7921c7938adb24f4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= Date: Thu, 13 Jan 2011 06:39:11 -0300 Subject: [media] gspca - sonixj: Infrared bug fix and enhancement MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The infrared was set by sensor write instead of bridge GPIO. It is now settable by the standard control ILLUMINATOR_1. A module parameter permits to set the right GPIO bit according to the StarCam model. Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 80 ++++++++++++++++++-------------------- 1 file changed, 38 insertions(+), 42 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 3e41653f11c1..c634dc113f94 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -25,12 +25,12 @@ #include "gspca.h" #include "jpeg.h" -#define V4L2_CID_INFRARED (V4L2_CID_PRIVATE_BASE + 0) - MODULE_AUTHOR("Jean-François Moine "); MODULE_DESCRIPTION("GSPCA/SONIX JPEG USB Camera Driver"); MODULE_LICENSE("GPL"); +static int starcam; + /* controls */ enum e_ctrl { BRIGHTNESS, @@ -43,7 +43,7 @@ enum e_ctrl { HFLIP, VFLIP, SHARPNESS, - INFRARED, + ILLUM, FREQ, NCTRLS /* number of controls */ }; @@ -100,7 +100,8 @@ enum sensors { }; /* device flags */ -#define PDN_INV 1 /* inverse pin S_PWR_DN / sn_xxx tables */ +#define F_PDN_INV 0x01 /* inverse pin S_PWR_DN / sn_xxx tables */ +#define F_ILLUM 0x02 /* presence of illuminator */ /* sn9c1xx definitions */ /* register 0x01 */ @@ -124,7 +125,7 @@ static void setgamma(struct gspca_dev *gspca_dev); static void setautogain(struct gspca_dev *gspca_dev); static void sethvflip(struct gspca_dev *gspca_dev); static void setsharpness(struct gspca_dev *gspca_dev); -static void setinfrared(struct gspca_dev *gspca_dev); +static void setillum(struct gspca_dev *gspca_dev); static void setfreq(struct gspca_dev *gspca_dev); static const struct ctrl sd_ctrls[NCTRLS] = { @@ -251,18 +252,17 @@ static const struct ctrl sd_ctrls[NCTRLS] = { }, .set_control = setsharpness }, -/* mt9v111 only */ -[INFRARED] = { +[ILLUM] = { { - .id = V4L2_CID_INFRARED, + .id = V4L2_CID_ILLUMINATORS_1, .type = V4L2_CTRL_TYPE_BOOLEAN, - .name = "Infrared", + .name = "Illuminator / infrared", .minimum = 0, .maximum = 1, .step = 1, .default_value = 0, }, - .set_control = setinfrared + .set_control = setillum }, /* ov7630/ov7648/ov7660 only */ [FREQ] = { @@ -282,32 +282,26 @@ static const struct ctrl sd_ctrls[NCTRLS] = { /* table of the disabled controls */ static const __u32 ctrl_dis[] = { [SENSOR_ADCM1700] = (1 << AUTOGAIN) | - (1 << INFRARED) | (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_GC0307] = (1 << INFRARED) | - (1 << HFLIP) | +[SENSOR_GC0307] = (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_HV7131R] = (1 << INFRARED) | - (1 << HFLIP) | +[SENSOR_HV7131R] = (1 << HFLIP) | (1 << FREQ), -[SENSOR_MI0360] = (1 << INFRARED) | - (1 << HFLIP) | +[SENSOR_MI0360] = (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_MI0360B] = (1 << INFRARED) | - (1 << HFLIP) | +[SENSOR_MI0360B] = (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_MO4000] = (1 << INFRARED) | - (1 << HFLIP) | +[SENSOR_MO4000] = (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), @@ -315,40 +309,32 @@ static const __u32 ctrl_dis[] = { (1 << VFLIP) | (1 << FREQ), -[SENSOR_OM6802] = (1 << INFRARED) | - (1 << HFLIP) | +[SENSOR_OM6802] = (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_OV7630] = (1 << INFRARED) | - (1 << HFLIP), +[SENSOR_OV7630] = (1 << HFLIP), -[SENSOR_OV7648] = (1 << INFRARED) | - (1 << HFLIP), +[SENSOR_OV7648] = (1 << HFLIP), [SENSOR_OV7660] = (1 << AUTOGAIN) | - (1 << INFRARED) | (1 << HFLIP) | (1 << VFLIP), [SENSOR_PO1030] = (1 << AUTOGAIN) | - (1 << INFRARED) | (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), [SENSOR_PO2030N] = (1 << AUTOGAIN) | - (1 << INFRARED) | (1 << FREQ), [SENSOR_SOI768] = (1 << AUTOGAIN) | - (1 << INFRARED) | (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), [SENSOR_SP80708] = (1 << AUTOGAIN) | - (1 << INFRARED) | (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), @@ -1876,6 +1862,8 @@ static int sd_init(struct gspca_dev *gspca_dev) sd->i2c_addr = sn9c1xx[9]; gspca_dev->ctrl_dis = ctrl_dis[sd->sensor]; + if (!(sd->flags & F_ILLUM)) + gspca_dev->ctrl_dis |= (1 << ILLUM); return gspca_dev->usb_err; } @@ -2199,16 +2187,20 @@ static void setsharpness(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x99, sd->ctrls[SHARPNESS].val); } -static void setinfrared(struct gspca_dev *gspca_dev) +static void setillum(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - if (gspca_dev->ctrl_dis & (1 << INFRARED)) + if (gspca_dev->ctrl_dis & (1 << ILLUM)) return; -/*fixme: different sequence for StarCam Clip and StarCam 370i */ -/* Clip */ - i2c_w1(gspca_dev, 0x02, /* gpio */ - sd->ctrls[INFRARED].val ? 0x66 : 0x64); + if (starcam) + reg_w1(gspca_dev, 0x02, /* gpio */ + sd->ctrls[ILLUM].val ? + 0x55 : 0x54); /* 370i */ + else + reg_w1(gspca_dev, 0x02, + sd->ctrls[ILLUM].val ? + 0x66 : 0x64); /* Clip */ } static void setfreq(struct gspca_dev *gspca_dev) @@ -2346,7 +2338,7 @@ static int sd_start(struct gspca_dev *gspca_dev) /* sensor clock already enabled in sd_init */ /* reg_w1(gspca_dev, 0xf1, 0x00); */ reg01 = sn9c1xx[1]; - if (sd->flags & PDN_INV) + if (sd->flags & F_PDN_INV) reg01 ^= S_PDN_INV; /* power down inverted */ reg_w1(gspca_dev, 0x01, reg01); @@ -2912,8 +2904,8 @@ static const struct sd_desc sd_desc = { static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)}, {USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)}, - {USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, PDN_INV)}, - {USB_DEVICE(0x045e, 0x00f7), BSF(SN9C105, OV7660, PDN_INV)}, + {USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, F_PDN_INV)}, + {USB_DEVICE(0x045e, 0x00f7), BSF(SN9C105, OV7660, F_PDN_INV)}, {USB_DEVICE(0x0471, 0x0327), BS(SN9C105, MI0360)}, {USB_DEVICE(0x0471, 0x0328), BS(SN9C105, MI0360)}, {USB_DEVICE(0x0471, 0x0330), BS(SN9C105, MI0360)}, @@ -2925,7 +2917,7 @@ static const struct usb_device_id device_table[] = { /* {USB_DEVICE(0x0c45, 0x607b), BS(SN9C102P, OV7660)}, */ {USB_DEVICE(0x0c45, 0x607c), BS(SN9C102P, HV7131R)}, /* {USB_DEVICE(0x0c45, 0x607e), BS(SN9C102P, OV7630)}, */ - {USB_DEVICE(0x0c45, 0x60c0), BS(SN9C105, MI0360)}, + {USB_DEVICE(0x0c45, 0x60c0), BSF(SN9C105, MI0360, F_ILLUM)}, /* or MT9V111 */ /* {USB_DEVICE(0x0c45, 0x60c2), BS(SN9C105, P1030xC)}, */ /* {USB_DEVICE(0x0c45, 0x60c8), BS(SN9C105, OM6802)}, */ @@ -3004,3 +2996,7 @@ static void __exit sd_mod_exit(void) module_init(sd_mod_init); module_exit(sd_mod_exit); + +module_param(starcam, int, 0644); +MODULE_PARM_DESC(starcam, + "StarCam model. 0: Clip, 1: 370i"); -- cgit v1.2.1 From a63d601803c2e3ba06ed51b9ed997fc6bf80e5bf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= Date: Thu, 13 Jan 2011 07:56:00 -0300 Subject: [media] gspca - sonixj: Add LED (illuminator) control to the webcam 0c45:614a MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index c634dc113f94..d6f39ce1b7e1 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -2193,14 +2193,22 @@ static void setillum(struct gspca_dev *gspca_dev) if (gspca_dev->ctrl_dis & (1 << ILLUM)) return; - if (starcam) - reg_w1(gspca_dev, 0x02, /* gpio */ - sd->ctrls[ILLUM].val ? - 0x55 : 0x54); /* 370i */ - else - reg_w1(gspca_dev, 0x02, - sd->ctrls[ILLUM].val ? - 0x66 : 0x64); /* Clip */ + switch (sd->sensor) { + case SENSOR_ADCM1700: + reg_w1(gspca_dev, 0x02, /* gpio */ + sd->ctrls[ILLUM].val ? 0x64 : 0x60); + break; + case SENSOR_MT9V111: + if (starcam) + reg_w1(gspca_dev, 0x02, + sd->ctrls[ILLUM].val ? + 0x55 : 0x54); /* 370i */ + else + reg_w1(gspca_dev, 0x02, + sd->ctrls[ILLUM].val ? + 0x66 : 0x64); /* Clip */ + break; + } } static void setfreq(struct gspca_dev *gspca_dev) @@ -2959,7 +2967,7 @@ static const struct usb_device_id device_table[] = { /* or GC0305 / GC0307 */ {USB_DEVICE(0x0c45, 0x6143), BS(SN9C120, SP80708)}, /*sn9c120b*/ {USB_DEVICE(0x0c45, 0x6148), BS(SN9C120, OM6802)}, /*sn9c120b*/ - {USB_DEVICE(0x0c45, 0x614a), BS(SN9C120, ADCM1700)}, /*sn9c120b*/ + {USB_DEVICE(0x0c45, 0x614a), BSF(SN9C120, ADCM1700, F_ILLUM)}, /* {USB_DEVICE(0x0c45, 0x614c), BS(SN9C120, GC0306)}, */ /*sn9c120b*/ {} }; -- cgit v1.2.1 From 36fd97884daf4e30b556a6c59b58db19a06d58af Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 2 Jan 2011 16:14:03 -0300 Subject: [media] frontends/ix2505v: Remember to free allocated memory in failure path We may leak the storage allocated to 'state' in drivers/media/dvb/frontends/ix2505v.c::ix2505v_attach() on error, as it is too early to be able to call ix2505v_release(). This patch makes sure we free the allocated memory in the failure case. Signed-off-by: Jesper Juhl Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/ix2505v.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/dvb/frontends/ix2505v.c b/drivers/media/dvb/frontends/ix2505v.c index 6360c681ded9..6c2e929bd79f 100644 --- a/drivers/media/dvb/frontends/ix2505v.c +++ b/drivers/media/dvb/frontends/ix2505v.c @@ -311,7 +311,7 @@ struct dvb_frontend *ix2505v_attach(struct dvb_frontend *fe, return fe; error: - ix2505v_release(fe); + kfree(state); return NULL; } EXPORT_SYMBOL(ix2505v_attach); -- cgit v1.2.1 From fd01ad98945073faeb25391489caef4844f265c4 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 2 Jan 2011 17:57:24 -0300 Subject: [media] media, tlg2300: Fix memory leak in alloc_bulk_urbs_generic() Hi, While reading drivers/media/video/tlg2300/pd-video.c::alloc_bulk_urbs_generic() I noticed that - We don't free the memory allocated to 'urb' if the call to usb_alloc_coherent() fails. - If the 'num' argument to the function is ever <= 0 we'll return an uninitialized variable 'i' to the caller. The following patch addresses both of the above by a) calling usb_free_urb() when usb_alloc_coherent() fails and by explicitly initializing 'i' to zero. I also moved the variables 'mem' and 'urb' inside the for loop. This does not actually make any difference, it just seemed more correct to me to let variables exist only in the innermost scope they are used. Signed-off-by: Jesper Juhl Acked-by: Huang Shijie Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tlg2300/pd-video.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/tlg2300/pd-video.c b/drivers/media/video/tlg2300/pd-video.c index a1ffe18640fe..df33a1d188bb 100644 --- a/drivers/media/video/tlg2300/pd-video.c +++ b/drivers/media/video/tlg2300/pd-video.c @@ -512,19 +512,20 @@ int alloc_bulk_urbs_generic(struct urb **urb_array, int num, int buf_size, gfp_t gfp_flags, usb_complete_t complete_fn, void *context) { - struct urb *urb; - void *mem; - int i; + int i = 0; - for (i = 0; i < num; i++) { - urb = usb_alloc_urb(0, gfp_flags); + for (; i < num; i++) { + void *mem; + struct urb *urb = usb_alloc_urb(0, gfp_flags); if (urb == NULL) return i; mem = usb_alloc_coherent(udev, buf_size, gfp_flags, &urb->transfer_dma); - if (mem == NULL) + if (mem == NULL) { + usb_free_urb(urb); return i; + } usb_fill_bulk_urb(urb, udev, usb_rcvbulkpipe(udev, ep_addr), mem, buf_size, complete_fn, context); -- cgit v1.2.1 From a3bc5e3304c9ba8e7504597026d9ca93784d1239 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Jan 2011 10:49:34 -0300 Subject: [media] v4l/cx18: update workqueue usage With cmwq, there's no reason to use separate out_work_queue. Drop it and use system_wq instead. The in_work_queue needs to be ordered so can't use one of the system wqs; however, as it isn't used to reclaim memory, allocate the workqueue with alloc_ordered_workqueue() without WQ_MEM_RECLAIM. Signed-off-by: Tejun Heo Reviewed-by: Andy Walls Acked-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-driver.c | 24 ++---------------------- drivers/media/video/cx18/cx18-driver.h | 3 --- drivers/media/video/cx18/cx18-streams.h | 3 +-- 3 files changed, 3 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 133ec2bac180..944af8adbe0c 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -664,7 +664,7 @@ static int __devinit cx18_create_in_workq(struct cx18 *cx) { snprintf(cx->in_workq_name, sizeof(cx->in_workq_name), "%s-in", cx->v4l2_dev.name); - cx->in_work_queue = create_singlethread_workqueue(cx->in_workq_name); + cx->in_work_queue = alloc_ordered_workqueue(cx->in_workq_name, 0); if (cx->in_work_queue == NULL) { CX18_ERR("Unable to create incoming mailbox handler thread\n"); return -ENOMEM; @@ -672,18 +672,6 @@ static int __devinit cx18_create_in_workq(struct cx18 *cx) return 0; } -static int __devinit cx18_create_out_workq(struct cx18 *cx) -{ - snprintf(cx->out_workq_name, sizeof(cx->out_workq_name), "%s-out", - cx->v4l2_dev.name); - cx->out_work_queue = create_workqueue(cx->out_workq_name); - if (cx->out_work_queue == NULL) { - CX18_ERR("Unable to create outgoing mailbox handler threads\n"); - return -ENOMEM; - } - return 0; -} - static void __devinit cx18_init_in_work_orders(struct cx18 *cx) { int i; @@ -710,15 +698,9 @@ static int __devinit cx18_init_struct1(struct cx18 *cx) mutex_init(&cx->epu2apu_mb_lock); mutex_init(&cx->epu2cpu_mb_lock); - ret = cx18_create_out_workq(cx); - if (ret) - return ret; - ret = cx18_create_in_workq(cx); - if (ret) { - destroy_workqueue(cx->out_work_queue); + if (ret) return ret; - } cx18_init_in_work_orders(cx); @@ -1107,7 +1089,6 @@ free_mem: release_mem_region(cx->base_addr, CX18_MEM_SIZE); free_workqueues: destroy_workqueue(cx->in_work_queue); - destroy_workqueue(cx->out_work_queue); err: if (retval == 0) retval = -ENODEV; @@ -1259,7 +1240,6 @@ static void cx18_remove(struct pci_dev *pci_dev) cx18_halt_firmware(cx); destroy_workqueue(cx->in_work_queue); - destroy_workqueue(cx->out_work_queue); cx18_streams_cleanup(cx, 1); diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index f6f3e50d4bdf..306caac6d3fc 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -617,9 +617,6 @@ struct cx18 { struct cx18_in_work_order in_work_order[CX18_MAX_IN_WORK_ORDERS]; char epu_debug_str[256]; /* CX18_EPU_DEBUG is rare: use shared space */ - struct workqueue_struct *out_work_queue; - char out_workq_name[12]; /* "cx18-NN-out" */ - /* i2c */ struct i2c_adapter i2c_adap[2]; struct i2c_algo_bit_data i2c_algo[2]; diff --git a/drivers/media/video/cx18/cx18-streams.h b/drivers/media/video/cx18/cx18-streams.h index 51765eb12d39..713b0e61536d 100644 --- a/drivers/media/video/cx18/cx18-streams.h +++ b/drivers/media/video/cx18/cx18-streams.h @@ -42,8 +42,7 @@ static inline bool cx18_stream_enabled(struct cx18_stream *s) /* Related to submission of mdls to firmware */ static inline void cx18_stream_load_fw_queue(struct cx18_stream *s) { - struct cx18 *cx = s->cx; - queue_work(cx->out_work_queue, &s->out_work_order); + schedule_work(&s->out_work_order); } static inline void cx18_stream_put_mdl_fw(struct cx18_stream *s, -- cgit v1.2.1 From 34b8fc8e683cbcbbe47806260ef5dc505915b45f Mon Sep 17 00:00:00 2001 From: Matti Aaltonen Date: Tue, 4 Jan 2011 08:29:37 -0300 Subject: [media] V4L2: WL1273 FM Radio: Replace ioctl with unlocked_ioctl Use unlocked_ioctl in v4l2_file_operations. The locking is already in place. Signed-off-by: Matti J. Aaltonen Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-wl1273.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c index dd6bd364efa0..7ecc8e657663 100644 --- a/drivers/media/radio/radio-wl1273.c +++ b/drivers/media/radio/radio-wl1273.c @@ -1407,7 +1407,7 @@ static const struct v4l2_file_operations wl1273_fops = { .read = wl1273_fm_fops_read, .write = wl1273_fm_fops_write, .poll = wl1273_fm_fops_poll, - .ioctl = video_ioctl2, + .unlocked_ioctl = video_ioctl2, .open = wl1273_fm_fops_open, .release = wl1273_fm_fops_release, }; -- cgit v1.2.1 From e95342f168f7a02441cec51b222bb7ae62df364d Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Thu, 6 Jan 2011 14:25:44 -0300 Subject: [media] DVB: cx231xx drivers does not use dummy frontend anymore Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx231xx/cx231xx-dvb.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/cx231xx/cx231xx-dvb.c b/drivers/media/video/cx231xx/cx231xx-dvb.c index fe59a1c3f064..363aa6004221 100644 --- a/drivers/media/video/cx231xx/cx231xx-dvb.c +++ b/drivers/media/video/cx231xx/cx231xx-dvb.c @@ -28,7 +28,6 @@ #include #include "xc5000.h" -#include "dvb_dummy_fe.h" #include "s5h1432.h" #include "tda18271.h" #include "s5h1411.h" @@ -619,7 +618,7 @@ static int dvb_init(struct cx231xx *dev) if (dev->dvb->frontend == NULL) { printk(DRIVER_NAME - ": Failed to attach dummy front end\n"); + ": Failed to attach s5h1411 front end\n"); result = -EINVAL; goto out_free; } @@ -665,7 +664,7 @@ static int dvb_init(struct cx231xx *dev) if (dev->dvb->frontend == NULL) { printk(DRIVER_NAME - ": Failed to attach dummy front end\n"); + ": Failed to attach s5h1411 front end\n"); result = -EINVAL; goto out_free; } -- cgit v1.2.1 From 7d2edfc23e9852591cb031a26093cdcd07a34a90 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 6 Jan 2011 16:57:14 -0300 Subject: [media] rc/imon: fix ffdc device detection oops There's a nasty bug that slipped in when the rc device interface was altered, only affecting the older 0xffdc imon devices. We were trying to access ictx->rdev->allowed_protos before ictx->rdev had been set. There's also an issue with call ordering that meant the correct keymap wasn't getting loaded for MCE IR type 0xffdc devices. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/imon.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 6811512b4e83..a30bd99c5ca4 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -1756,7 +1756,6 @@ static void imon_get_ffdc_type(struct imon_context *ictx) printk(KERN_CONT " (id 0x%02x)\n", ffdc_cfg_byte); ictx->display_type = detected_display_type; - ictx->rdev->allowed_protos = allowed_protos; ictx->rc_type = allowed_protos; } @@ -1839,10 +1838,6 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx) rdev->allowed_protos = RC_TYPE_OTHER | RC_TYPE_RC6; /* iMON PAD or MCE */ rdev->change_protocol = imon_ir_change_protocol; rdev->driver_name = MOD_NAME; - if (ictx->rc_type == RC_TYPE_RC6) - rdev->map_name = RC_MAP_IMON_MCE; - else - rdev->map_name = RC_MAP_IMON_PAD; /* Enable front-panel buttons and/or knobs */ memcpy(ictx->usb_tx_buf, &fp_packet, sizeof(fp_packet)); @@ -1851,11 +1846,18 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx) if (ret) dev_info(ictx->dev, "panel buttons/knobs setup failed\n"); - if (ictx->product == 0xffdc) + if (ictx->product == 0xffdc) { imon_get_ffdc_type(ictx); + rdev->allowed_protos = ictx->rc_type; + } imon_set_display_type(ictx); + if (ictx->rc_type == RC_TYPE_RC6) + rdev->map_name = RC_MAP_IMON_MCE; + else + rdev->map_name = RC_MAP_IMON_PAD; + ret = rc_register_device(rdev); if (ret < 0) { dev_err(ictx->dev, "remote input dev register failed\n"); -- cgit v1.2.1 From 2e4c55626a0c30b5b2bc9469c025a563a81c3785 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Thu, 6 Jan 2011 16:59:33 -0300 Subject: [media] rc/ene_ir: fix oops on module load dev->rdev is accessed in ene_setup_hw_settings, so it needs to be wired up before then. [Jarod Wilson]: Also fix a possible improper resource freeing bug while we're looking at possible probe issues here. Signed-off-by: Kyle McMartin CC: Maxim Levitsky Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/ene_ir.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c index 80b3c319f698..885abdddfaa8 100644 --- a/drivers/media/rc/ene_ir.c +++ b/drivers/media/rc/ene_ir.c @@ -1004,6 +1004,10 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id) /* validate resources */ error = -ENODEV; + /* init these to -1, as 0 is valid for both */ + dev->hw_io = -1; + dev->irq = -1; + if (!pnp_port_valid(pnp_dev, 0) || pnp_port_len(pnp_dev, 0) < ENE_IO_SIZE) goto error; @@ -1072,6 +1076,8 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id) rdev->input_name = "ENE eHome Infrared Remote Transceiver"; } + dev->rdev = rdev; + ene_rx_setup_hw_buffer(dev); ene_setup_default_settings(dev); ene_setup_hw_settings(dev); @@ -1083,7 +1089,6 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id) if (error < 0) goto error; - dev->rdev = rdev; ene_notice("driver has been succesfully loaded"); return 0; error: -- cgit v1.2.1 From 9ad77eb57b45f81ac3e12077d19e5f121c4cff6d Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 6 Jan 2011 16:59:34 -0300 Subject: [media] rc/imon: need to submit urb before ffdc type check Otherwise, we have a null receive buffer, and the logic all falls down, goes boom, all ffdc devs wind up as imon IR w/VFD. Oops. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/imon.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index a30bd99c5ca4..703420749243 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -2110,18 +2110,6 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf) goto find_endpoint_failed; } - ictx->idev = imon_init_idev(ictx); - if (!ictx->idev) { - dev_err(dev, "%s: input device setup failed\n", __func__); - goto idev_setup_failed; - } - - ictx->rdev = imon_init_rdev(ictx); - if (!ictx->rdev) { - dev_err(dev, "%s: rc device setup failed\n", __func__); - goto rdev_setup_failed; - } - usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0, usb_rcvintpipe(ictx->usbdev_intf0, ictx->rx_endpoint_intf0->bEndpointAddress), @@ -2135,13 +2123,25 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf) goto urb_submit_failed; } + ictx->idev = imon_init_idev(ictx); + if (!ictx->idev) { + dev_err(dev, "%s: input device setup failed\n", __func__); + goto idev_setup_failed; + } + + ictx->rdev = imon_init_rdev(ictx); + if (!ictx->rdev) { + dev_err(dev, "%s: rc device setup failed\n", __func__); + goto rdev_setup_failed; + } + return ictx; -urb_submit_failed: - rc_unregister_device(ictx->rdev); rdev_setup_failed: input_unregister_device(ictx->idev); idev_setup_failed: + usb_kill_urb(ictx->rx_urb_intf0); +urb_submit_failed: find_endpoint_failed: mutex_unlock(&ictx->lock); usb_free_urb(tx_urb); -- cgit v1.2.1 From 5aad724280b9f8ffff3a55311ef0ba35ebb4099a Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 6 Jan 2011 16:59:36 -0300 Subject: [media] rc: fix up and genericize some time unit conversions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ene_ir driver was using a private define of MS_TO_NS, which is meant to be microseconds to nanoseconds. The mceusb driver copied it, intending to use is a milliseconds to microseconds. Lets move the defines to a common location, expand and standardize them a touch, so that we now have: MS_TO_NS - milliseconds to nanoseconds MS_TO_US - milliseconds to microseconds US_TO_NS - microseconds to nanoseconds Reported-by: David Härdeman CC: Maxim Levitsky Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/ene_ir.c | 16 ++++++++-------- drivers/media/rc/ene_ir.h | 2 -- drivers/media/rc/mceusb.c | 7 +++---- 3 files changed, 11 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c index 885abdddfaa8..1ac49139158d 100644 --- a/drivers/media/rc/ene_ir.c +++ b/drivers/media/rc/ene_ir.c @@ -446,27 +446,27 @@ static void ene_rx_setup(struct ene_device *dev) select_timeout: if (dev->rx_fan_input_inuse) { - dev->rdev->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN); + dev->rdev->rx_resolution = US_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN); /* Fan input doesn't support timeouts, it just ends the input with a maximum sample */ dev->rdev->min_timeout = dev->rdev->max_timeout = - MS_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK * + US_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK * ENE_FW_SAMPLE_PERIOD_FAN); } else { - dev->rdev->rx_resolution = MS_TO_NS(sample_period); + dev->rdev->rx_resolution = US_TO_NS(sample_period); /* Theoreticly timeout is unlimited, but we cap it * because it was seen that on one device, it * would stop sending spaces after around 250 msec. * Besides, this is close to 2^32 anyway and timeout is u32. */ - dev->rdev->min_timeout = MS_TO_NS(127 * sample_period); - dev->rdev->max_timeout = MS_TO_NS(200000); + dev->rdev->min_timeout = US_TO_NS(127 * sample_period); + dev->rdev->max_timeout = US_TO_NS(200000); } if (dev->hw_learning_and_tx_capable) - dev->rdev->tx_resolution = MS_TO_NS(sample_period); + dev->rdev->tx_resolution = US_TO_NS(sample_period); if (dev->rdev->timeout > dev->rdev->max_timeout) dev->rdev->timeout = dev->rdev->max_timeout; @@ -801,7 +801,7 @@ static irqreturn_t ene_isr(int irq, void *data) dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space"); - ev.duration = MS_TO_NS(hw_sample); + ev.duration = US_TO_NS(hw_sample); ev.pulse = pulse; ir_raw_event_store_with_filter(dev->rdev, &ev); } @@ -821,7 +821,7 @@ static void ene_setup_default_settings(struct ene_device *dev) dev->learning_mode_enabled = learning_mode_force; /* Set reasonable default timeout */ - dev->rdev->timeout = MS_TO_NS(150000); + dev->rdev->timeout = US_TO_NS(150000); } /* Upload all hardware settings at once. Used at load and resume time */ diff --git a/drivers/media/rc/ene_ir.h b/drivers/media/rc/ene_ir.h index c179baf34cb4..337a41d4450b 100644 --- a/drivers/media/rc/ene_ir.h +++ b/drivers/media/rc/ene_ir.h @@ -201,8 +201,6 @@ #define dbg_verbose(format, ...) __dbg(2, format, ## __VA_ARGS__) #define dbg_regs(format, ...) __dbg(3, format, ## __VA_ARGS__) -#define MS_TO_NS(msec) ((msec) * 1000) - struct ene_device { struct pnp_dev *pnp_dev; struct rc_dev *rdev; diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 0fef6efad537..2d9113493cf0 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -48,7 +48,6 @@ #define USB_BUFLEN 32 /* USB reception buffer length */ #define USB_CTRL_MSG_SZ 2 /* Size of usb ctrl msg on gen1 hw */ #define MCE_G1_INIT_MSGS 40 /* Init messages on gen1 hw to throw out */ -#define MS_TO_NS(msec) ((msec) * 1000) /* MCE constants */ #define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */ @@ -817,7 +816,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index) switch (ir->buf_in[index]) { /* 2-byte return value commands */ case MCE_CMD_S_TIMEOUT: - ir->rc->timeout = MS_TO_NS((hi << 8 | lo) / 2); + ir->rc->timeout = MS_TO_US((hi << 8 | lo) / 2); break; /* 1-byte return value commands */ @@ -858,7 +857,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) ir->rem--; rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0); rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK) - * MS_TO_NS(MCE_TIME_UNIT); + * MS_TO_US(MCE_TIME_UNIT); dev_dbg(ir->dev, "Storing %s with duration %d\n", rawir.pulse ? "pulse" : "space", @@ -1061,7 +1060,7 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir) rc->priv = ir; rc->driver_type = RC_DRIVER_IR_RAW; rc->allowed_protos = RC_TYPE_ALL; - rc->timeout = MS_TO_NS(1000); + rc->timeout = MS_TO_US(1000); if (!ir->flags.no_tx) { rc->s_tx_mask = mceusb_set_tx_mask; rc->s_tx_carrier = mceusb_set_tx_carrier; -- cgit v1.2.1 From 76f1ef427c0aab3d3c917b497562ea2cdaaae056 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 6 Jan 2011 16:59:35 -0300 Subject: [media] rc/imon: default to key mode instead of mouse mode My initial thinking was that we should default to mouse mode, so people could use the mouse function to click on something on a login screen, but a lot of systems where a remote is useful automatically log in a user and launch a media center application, some of which hide the mouse, which can be confusing to users if they punch buttons on the remote and don't see any feedback. Plus, first and foremost, its a remote, so lets default to being a remote, and only toggle into mouse mode when the user explicitly asks for it. As a nice side-effect, this actually simplifies some of the code a fair bit... Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/imon.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 703420749243..e7dc6b46fdfa 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -988,7 +988,6 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type) int retval; struct imon_context *ictx = rc->priv; struct device *dev = ictx->dev; - bool pad_mouse; unsigned char ir_proto_packet[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 }; @@ -1000,29 +999,20 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type) case RC_TYPE_RC6: dev_dbg(dev, "Configuring IR receiver for MCE protocol\n"); ir_proto_packet[0] = 0x01; - pad_mouse = false; break; case RC_TYPE_UNKNOWN: case RC_TYPE_OTHER: dev_dbg(dev, "Configuring IR receiver for iMON protocol\n"); - if (pad_stabilize && !nomouse) - pad_mouse = true; - else { + if (!pad_stabilize) dev_dbg(dev, "PAD stabilize functionality disabled\n"); - pad_mouse = false; - } /* ir_proto_packet[0] = 0x00; // already the default */ rc_type = RC_TYPE_OTHER; break; default: dev_warn(dev, "Unsupported IR protocol specified, overriding " "to iMON IR protocol\n"); - if (pad_stabilize && !nomouse) - pad_mouse = true; - else { + if (!pad_stabilize) dev_dbg(dev, "PAD stabilize functionality disabled\n"); - pad_mouse = false; - } /* ir_proto_packet[0] = 0x00; // already the default */ rc_type = RC_TYPE_OTHER; break; @@ -1035,7 +1025,7 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type) goto out; ictx->rc_type = rc_type; - ictx->pad_mouse = pad_mouse; + ictx->pad_mouse = false; out: return retval; @@ -1517,7 +1507,7 @@ static void imon_incoming_packet(struct imon_context *ictx, spin_unlock_irqrestore(&ictx->kc_lock, flags); return; } else { - ictx->pad_mouse = 0; + ictx->pad_mouse = false; dev_dbg(dev, "mouse mode disabled, passing key value\n"); } } -- cgit v1.2.1 From cb26a24ee9706473f31d34cc259f4dcf45cd0644 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 7 Jan 2011 16:41:54 -0300 Subject: [media] [v3,media] av7110: check for negative array offset info->num comes from the user. It's type int. If the user passes in a negative value that would cause memory corruption. Signed-off-by: Dan Carpenter Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/ttpci/av7110_ca.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c index 122c72806916..9fc1dd0ba4c3 100644 --- a/drivers/media/dvb/ttpci/av7110_ca.c +++ b/drivers/media/dvb/ttpci/av7110_ca.c @@ -277,7 +277,7 @@ static int dvb_ca_ioctl(struct file *file, unsigned int cmd, void *parg) { ca_slot_info_t *info=(ca_slot_info_t *)parg; - if (info->num > 1) + if (info->num < 0 || info->num > 1) return -EINVAL; av7110->ci_slot[info->num].num = info->num; av7110->ci_slot[info->num].type = FW_CI_LL_SUPPORT(av7110->arm_app) ? -- cgit v1.2.1 From b7eccc46a1dae153d0102c161b4ce4bddb3f52ba Mon Sep 17 00:00:00 2001 From: Christian Gmeiner Date: Sat, 8 Jan 2011 18:45:35 -0300 Subject: [media] adv7175: support s_power This patch adds s_power support to adv7175 driver. Power-down is done by power-down all four DACs. Signed-off-by: Christian Gmeiner Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/adv7175.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c index f318b51448b3..d2327dbb473f 100644 --- a/drivers/media/video/adv7175.c +++ b/drivers/media/video/adv7175.c @@ -303,11 +303,22 @@ static int adv7175_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ide return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7175, 0); } +static int adv7175_s_power(struct v4l2_subdev *sd, int on) +{ + if (on) + adv7175_write(sd, 0x01, 0x00); + else + adv7175_write(sd, 0x01, 0x78); + + return 0; +} + /* ----------------------------------------------------------------------- */ static const struct v4l2_subdev_core_ops adv7175_core_ops = { .g_chip_ident = adv7175_g_chip_ident, .init = adv7175_init, + .s_power = adv7175_s_power, }; static const struct v4l2_subdev_video_ops adv7175_video_ops = { -- cgit v1.2.1 From 2dbd61b4651f0bdc6cd5f75a983844b5f3831e17 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 9 Jan 2011 00:53:53 -0300 Subject: [media] ir-raw: fix sparse non-ANSI function warning Fix sparse warning for non-ANSI function declaration: drivers/media/rc/ir-raw.c:247:30: warning: non-ANSI function declaration of function 'ir_raw_get_allowed_protocols' Signed-off-by: Randy Dunlap Cc: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/ir-raw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c index 185baddcbf14..73230ff93b8a 100644 --- a/drivers/media/rc/ir-raw.c +++ b/drivers/media/rc/ir-raw.c @@ -233,7 +233,7 @@ EXPORT_SYMBOL_GPL(ir_raw_event_handle); /* used internally by the sysfs interface */ u64 -ir_raw_get_allowed_protocols() +ir_raw_get_allowed_protocols(void) { u64 protocols; mutex_lock(&ir_raw_handler_lock); -- cgit v1.2.1 From 2400982a2e8a8e4e95f0a0e1517bbe63cc88038f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 16 Jan 2011 10:09:13 -0300 Subject: [media] radio-aimslab.c needs #include MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit e3c92215198cb6aa00ad38db2780faa6b72e0a3f ("[media] radio-aimslab.c: Fix gcc 4.5+ bug") removed the include, but introduced new callers of msleep(): | drivers/media/radio/radio-aimslab.c: In function ‘rt_decvol’: | drivers/media/radio/radio-aimslab.c:76: error: implicit declaration of function ‘msleep’ Signed-off-by: Geert Uytterhoeven Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-aimslab.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c index 6cc5d130fbc8..4ce10dbeadd8 100644 --- a/drivers/media/radio/radio-aimslab.c +++ b/drivers/media/radio/radio-aimslab.c @@ -31,6 +31,7 @@ #include /* Modules */ #include /* Initdata */ #include /* request_region */ +#include /* msleep */ #include /* kernel radio structs */ #include /* for KERNEL_VERSION MACRO */ #include /* outb, outb_p */ -- cgit v1.2.1 From 3c61be446ae5c26e2829d37c6b5d02d3af536024 Mon Sep 17 00:00:00 2001 From: Dmitri Belimov Date: Thu, 13 Jan 2011 00:46:07 -0300 Subject: [media] tm6000: rework init code Rework device init part. Move common code part to a function. Usefull for register multiple devices like video, radio, vbi etc. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/tm6000/tm6000-video.c | 46 +++++++++++++++++++++++++++-------- 1 file changed, 36 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/tm6000/tm6000-video.c b/drivers/staging/tm6000/tm6000-video.c index 8fe017c3721f..eb9b9f1bc138 100644 --- a/drivers/staging/tm6000/tm6000-video.c +++ b/drivers/staging/tm6000/tm6000-video.c @@ -1450,29 +1450,55 @@ static struct video_device tm6000_template = { * ------------------------------------------------------------------ */ -int tm6000_v4l2_register(struct tm6000_core *dev) +static struct video_device *vdev_init(struct tm6000_core *dev, + const struct video_device + *template, const char *type_name) { - int ret = -1; struct video_device *vfd; vfd = video_device_alloc(); - if(!vfd) { + if (NULL == vfd) + return NULL; + + *vfd = *template; + vfd->v4l2_dev = &dev->v4l2_dev; + vfd->release = video_device_release; + vfd->debug = tm6000_debug; + vfd->lock = &dev->lock; + + snprintf(vfd->name, sizeof(vfd->name), "%s %s", dev->name, type_name); + + video_set_drvdata(vfd, dev); + return vfd; +} + +int tm6000_v4l2_register(struct tm6000_core *dev) +{ + int ret = -1; + + dev->vfd = vdev_init(dev, &tm6000_template, "video"); + + if (!dev->vfd) { + printk(KERN_INFO "%s: can't register video device\n", + dev->name); return -ENOMEM; } - dev->vfd = vfd; /* init video dma queues */ INIT_LIST_HEAD(&dev->vidq.active); INIT_LIST_HEAD(&dev->vidq.queued); - memcpy(dev->vfd, &tm6000_template, sizeof(*(dev->vfd))); - dev->vfd->debug = tm6000_debug; - dev->vfd->lock = &dev->lock; + ret = video_register_device(dev->vfd, VFL_TYPE_GRABBER, video_nr); - vfd->v4l2_dev = &dev->v4l2_dev; - video_set_drvdata(vfd, dev); + if (ret < 0) { + printk(KERN_INFO "%s: can't register video device\n", + dev->name); + return ret; + } + + printk(KERN_INFO "%s: registered device %s\n", + dev->name, video_device_node_name(dev->vfd)); - ret = video_register_device(dev->vfd, VFL_TYPE_GRABBER, video_nr); printk(KERN_INFO "Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: %d)\n", ret); return ret; } -- cgit v1.2.1 From 22f37712f29868b393025aa28bee807b4d2783ea Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 16 Jan 2011 05:39:21 -0300 Subject: [media] firedtv: fix remote control with newer Xorg evdev After a recent update of xf86-input-evdev and xorg-server, I noticed that X11 applications did not receive keypresses from the FireDTV infrared remote control anymore. Instead, the Xorg log featured lots of "FireDTV remote control: dropping event due to full queue!" exclamations. The Linux console did not have an issue with the FireDTV's RC though. The fix is to insert EV_SYN events after the key-down/-up events. Signed-off-by: Stefan Richter Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/firewire/firedtv-rc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/firewire/firedtv-rc.c b/drivers/media/dvb/firewire/firedtv-rc.c index fcf3828472b8..f82d4a93feb3 100644 --- a/drivers/media/dvb/firewire/firedtv-rc.c +++ b/drivers/media/dvb/firewire/firedtv-rc.c @@ -172,7 +172,8 @@ void fdtv_unregister_rc(struct firedtv *fdtv) void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code) { - u16 *keycode = fdtv->remote_ctrl_dev->keycode; + struct input_dev *idev = fdtv->remote_ctrl_dev; + u16 *keycode = idev->keycode; if (code >= 0x0300 && code <= 0x031f) code = keycode[code - 0x0300]; @@ -188,6 +189,8 @@ void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code) return; } - input_report_key(fdtv->remote_ctrl_dev, code, 1); - input_report_key(fdtv->remote_ctrl_dev, code, 0); + input_report_key(idev, code, 1); + input_sync(idev); + input_report_key(idev, code, 0); + input_sync(idev); } -- cgit v1.2.1 From 86e52428eed0507a11ba03c5de731c763bd88480 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Wed, 12 Jan 2011 22:50:10 -0300 Subject: [media] lirc_zilog: Reword debug message in ir_probe() Jean Delvare suggested this better format for debug output in ir_probe(). Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index ad29bb1275ab..bf81e3fddf80 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -1195,9 +1195,8 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) int ret; int have_rx = 0, have_tx = 0; - dprintk("%s: adapter name (%s) nr %d, i2c_device_id name (%s), " - "client addr=0x%02x\n", - __func__, adap->name, adap->nr, id->name, client->addr); + dprintk("%s: %s on i2c-%d (%s), client addr=0x%02x\n", + __func__, id->name, adap->nr, adap->name, client->addr); /* * FIXME - This probe function probes both the Tx and Rx -- cgit v1.2.1 From 02fcaaa3a52b2bdad8a08a3ee5747f27f27df27d Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Wed, 12 Jan 2011 23:31:25 -0300 Subject: [media] lirc_zilog: Remove disable_tx module parameter The only reason to use the lirc_zilog module is for IR Tx, so remove the possibility of disabling IR Tx. If the user needs only IR Rx, then the ir-kbd-i2c module works just fine, and doesn't require a "firmware" image. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index bf81e3fddf80..91125336144e 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -131,7 +131,6 @@ static struct mutex tx_data_lock; /* module parameters */ static int debug; /* debug output */ static int disable_rx; /* disable RX device */ -static int disable_tx; /* disable TX device */ static int minor = -1; /* minor number */ #define dprintk(fmt, args...) \ @@ -1218,12 +1217,10 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) */ client->addr = 0x70; - if (!disable_tx) { - if (i2c_master_recv(client, &buf, 1) == 1) - have_tx = 1; - dprintk("probe 0x70 @ %s: %s\n", - adap->name, have_tx ? "success" : "failed"); - } + if (i2c_master_recv(client, &buf, 1) == 1) + have_tx = 1; + dprintk("probe 0x70 @ %s: %s\n", + adap->name, have_tx ? "success" : "failed"); if (!disable_rx) { client->addr = 0x71; @@ -1398,6 +1395,3 @@ MODULE_PARM_DESC(debug, "Enable debugging messages"); module_param(disable_rx, bool, 0644); MODULE_PARM_DESC(disable_rx, "Disable the IR receiver device"); - -module_param(disable_tx, bool, 0644); -MODULE_PARM_DESC(disable_tx, "Disable the IR transmitter device"); -- cgit v1.2.1 From 06da95a3ec831dee23f6af58934944a8eb9c3a56 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Thu, 13 Jan 2011 02:00:33 -0300 Subject: [media] lirc_zilog: Split struct IR into structs IR, IR_tx, and IR_rx This change is a mostly mechanical break of the main struct IR data structure into common, Rx, and Tx structures. There were some small logical changes required as well, such as eliminating "is_hdpvr", to accomplish this. This change is an intiial step in reworking lirc_zilog to decouple the Rx and Tx handling as much as possible to fit with the new I2C binding model. This change actually makes lirc_zilog a little more broken than it already was - memory deallocation in particular got worse. However, this change makes the remaining problems easier to see and address. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 298 ++++++++++++++++++++++---------------- 1 file changed, 171 insertions(+), 127 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index 91125336144e..85e312f33513 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -60,17 +60,9 @@ #include #include -struct IR { - struct lirc_driver l; - - /* Device info */ - struct mutex ir_lock; - int open; - bool is_hdpvr; - +struct IR_rx { /* RX device */ struct i2c_client c_rx; - int have_rx; /* RX device buffer & lock */ struct lirc_buffer buf; @@ -84,11 +76,26 @@ struct IR { /* RX read data */ unsigned char b[3]; + bool hdpvr_data_fmt; +}; +struct IR_tx { /* TX device */ struct i2c_client c_tx; + + /* TX additional actions needed */ int need_boot; - int have_tx; + bool post_tx_ready_poll; +}; + +struct IR { + struct lirc_driver l; + + struct mutex ir_lock; + int open; + + struct IR_rx *rx; + struct IR_tx *tx; }; /* Minor -> data mapping */ @@ -149,8 +156,12 @@ static int add_to_buf(struct IR *ir) int ret; int failures = 0; unsigned char sendbuf[1] = { 0 }; + struct IR_rx *rx = ir->rx; - if (lirc_buffer_full(&ir->buf)) { + if (rx == NULL) + return -ENXIO; + + if (lirc_buffer_full(&rx->buf)) { dprintk("buffer overflow\n"); return -EOVERFLOW; } @@ -170,7 +181,7 @@ static int add_to_buf(struct IR *ir) * Send random "poll command" (?) Windows driver does this * and it is a good point to detect chip failure. */ - ret = i2c_master_send(&ir->c_rx, sendbuf, 1); + ret = i2c_master_send(&rx->c_rx, sendbuf, 1); if (ret != 1) { zilog_error("i2c_master_send failed with %d\n", ret); if (failures >= 3) { @@ -186,44 +197,45 @@ static int add_to_buf(struct IR *ir) set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout((100 * HZ + 999) / 1000); - ir->need_boot = 1; + if (ir->tx != NULL) + ir->tx->need_boot = 1; ++failures; mutex_unlock(&ir->ir_lock); continue; } - ret = i2c_master_recv(&ir->c_rx, keybuf, sizeof(keybuf)); + ret = i2c_master_recv(&rx->c_rx, keybuf, sizeof(keybuf)); mutex_unlock(&ir->ir_lock); if (ret != sizeof(keybuf)) { zilog_error("i2c_master_recv failed with %d -- " "keeping last read buffer\n", ret); } else { - ir->b[0] = keybuf[3]; - ir->b[1] = keybuf[4]; - ir->b[2] = keybuf[5]; - dprintk("key (0x%02x/0x%02x)\n", ir->b[0], ir->b[1]); + rx->b[0] = keybuf[3]; + rx->b[1] = keybuf[4]; + rx->b[2] = keybuf[5]; + dprintk("key (0x%02x/0x%02x)\n", rx->b[0], rx->b[1]); } /* key pressed ? */ - if (ir->is_hdpvr) { + if (rx->hdpvr_data_fmt) { if (got_data && (keybuf[0] == 0x80)) return 0; else if (got_data && (keybuf[0] == 0x00)) return -ENODATA; - } else if ((ir->b[0] & 0x80) == 0) + } else if ((rx->b[0] & 0x80) == 0) return got_data ? 0 : -ENODATA; /* look what we have */ - code = (((__u16)ir->b[0] & 0x7f) << 6) | (ir->b[1] >> 2); + code = (((__u16)rx->b[0] & 0x7f) << 6) | (rx->b[1] >> 2); codes[0] = (code >> 8) & 0xff; codes[1] = code & 0xff; /* return it */ - lirc_buffer_write(&ir->buf, codes); + lirc_buffer_write(&rx->buf, codes); ++got_data; - } while (!lirc_buffer_full(&ir->buf)); + } while (!lirc_buffer_full(&rx->buf)); return 0; } @@ -241,9 +253,13 @@ static int add_to_buf(struct IR *ir) static int lirc_thread(void *arg) { struct IR *ir = arg; + struct IR_rx *rx = ir->rx; + + if (rx == NULL) + return -ENXIO; - if (ir->t_notify != NULL) - complete(ir->t_notify); + if (rx->t_notify != NULL) + complete(rx->t_notify); dprintk("poll thread started\n"); @@ -264,23 +280,23 @@ static int lirc_thread(void *arg) * lost keypresses. */ schedule_timeout((260 * HZ) / 1000); - if (ir->shutdown) + if (rx->shutdown) break; if (!add_to_buf(ir)) - wake_up_interruptible(&ir->buf.wait_poll); + wake_up_interruptible(&rx->buf.wait_poll); } else { /* if device not opened so we can sleep half a second */ set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(HZ/2); } - } while (!ir->shutdown); + } while (!rx->shutdown); - if (ir->t_notify2 != NULL) - wait_for_completion(ir->t_notify2); + if (rx->t_notify2 != NULL) + wait_for_completion(rx->t_notify2); - ir->task = NULL; - if (ir->t_notify != NULL) - complete(ir->t_notify); + rx->task = NULL; + if (rx->t_notify != NULL) + complete(rx->t_notify); dprintk("poll thread ended\n"); return 0; @@ -298,10 +314,10 @@ static int set_use_inc(void *data) * this is completely broken code. lirc_unregister_driver() * must be possible even when the device is open */ - if (ir->c_rx.addr) - i2c_use_client(&ir->c_rx); - if (ir->c_tx.addr) - i2c_use_client(&ir->c_tx); + if (ir->rx != NULL) + i2c_use_client(&ir->rx->c_rx); + if (ir->tx != NULL) + i2c_use_client(&ir->tx->c_tx); return 0; } @@ -310,10 +326,10 @@ static void set_use_dec(void *data) { struct IR *ir = data; - if (ir->c_rx.addr) - i2c_release_client(&ir->c_rx); - if (ir->c_tx.addr) - i2c_release_client(&ir->c_tx); + if (ir->rx) + i2c_release_client(&ir->rx->c_rx); + if (ir->tx) + i2c_release_client(&ir->tx->c_tx); if (ir->l.owner != NULL) module_put(ir->l.owner); } @@ -452,7 +468,7 @@ corrupt: } /* send a block of data to the IR TX device */ -static int send_data_block(struct IR *ir, unsigned char *data_block) +static int send_data_block(struct IR_tx *tx, unsigned char *data_block) { int i, j, ret; unsigned char buf[5]; @@ -466,7 +482,7 @@ static int send_data_block(struct IR *ir, unsigned char *data_block) buf[1 + j] = data_block[i + j]; dprintk("%02x %02x %02x %02x %02x", buf[0], buf[1], buf[2], buf[3], buf[4]); - ret = i2c_master_send(&ir->c_tx, buf, tosend + 1); + ret = i2c_master_send(&tx->c_tx, buf, tosend + 1); if (ret != tosend + 1) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; @@ -477,32 +493,32 @@ static int send_data_block(struct IR *ir, unsigned char *data_block) } /* send boot data to the IR TX device */ -static int send_boot_data(struct IR *ir) +static int send_boot_data(struct IR_tx *tx) { int ret; unsigned char buf[4]; /* send the boot block */ - ret = send_data_block(ir, tx_data->boot_data); + ret = send_data_block(tx, tx_data->boot_data); if (ret != 0) return ret; /* kick it off? */ buf[0] = 0x00; buf[1] = 0x20; - ret = i2c_master_send(&ir->c_tx, buf, 2); + ret = i2c_master_send(&tx->c_tx, buf, 2); if (ret != 2) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } - ret = i2c_master_send(&ir->c_tx, buf, 1); + ret = i2c_master_send(&tx->c_tx, buf, 1); if (ret != 1) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } /* Here comes the firmware version... (hopefully) */ - ret = i2c_master_recv(&ir->c_tx, buf, 4); + ret = i2c_master_recv(&tx->c_tx, buf, 4); if (ret != 4) { zilog_error("i2c_master_recv failed with %d\n", ret); return 0; @@ -542,7 +558,7 @@ static void fw_unload(void) } /* load "firmware" for the IR TX device */ -static int fw_load(struct IR *ir) +static int fw_load(struct IR_tx *tx) { int ret; unsigned int i; @@ -557,7 +573,7 @@ static int fw_load(struct IR *ir) } /* Request codeset data file */ - ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", &ir->c_tx.dev); + ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", &tx->c_tx.dev); if (ret != 0) { zilog_error("firmware haup-ir-blaster.bin not available " "(%d)\n", ret); @@ -684,20 +700,20 @@ out: } /* initialise the IR TX device */ -static int tx_init(struct IR *ir) +static int tx_init(struct IR_tx *tx) { int ret; /* Load 'firmware' */ - ret = fw_load(ir); + ret = fw_load(tx); if (ret != 0) return ret; /* Send boot block */ - ret = send_boot_data(ir); + ret = send_boot_data(tx); if (ret != 0) return ret; - ir->need_boot = 0; + tx->need_boot = 0; /* Looks good */ return 0; @@ -713,20 +729,20 @@ static loff_t lseek(struct file *filep, loff_t offset, int orig) static ssize_t read(struct file *filep, char *outbuf, size_t n, loff_t *ppos) { struct IR *ir = filep->private_data; - unsigned char buf[ir->buf.chunk_size]; + struct IR_rx *rx = ir->rx; int ret = 0, written = 0; DECLARE_WAITQUEUE(wait, current); dprintk("read called\n"); - if (ir->c_rx.addr == 0) + if (rx == NULL) return -ENODEV; - if (mutex_lock_interruptible(&ir->buf_lock)) + if (mutex_lock_interruptible(&rx->buf_lock)) return -ERESTARTSYS; - if (n % ir->buf.chunk_size) { + if (n % rx->buf.chunk_size) { dprintk("read result = -EINVAL\n"); - mutex_unlock(&ir->buf_lock); + mutex_unlock(&rx->buf_lock); return -EINVAL; } @@ -735,7 +751,7 @@ static ssize_t read(struct file *filep, char *outbuf, size_t n, loff_t *ppos) * to avoid losing scan code (in case when queue is awaken somewhere * between while condition checking and scheduling) */ - add_wait_queue(&ir->buf.wait_poll, &wait); + add_wait_queue(&rx->buf.wait_poll, &wait); set_current_state(TASK_INTERRUPTIBLE); /* @@ -743,7 +759,7 @@ static ssize_t read(struct file *filep, char *outbuf, size_t n, loff_t *ppos) * mode and 'copy_to_user' is happy, wait for data. */ while (written < n && ret == 0) { - if (lirc_buffer_empty(&ir->buf)) { + if (lirc_buffer_empty(&rx->buf)) { /* * According to the read(2) man page, 'written' can be * returned as less than 'n', instead of blocking @@ -763,16 +779,17 @@ static ssize_t read(struct file *filep, char *outbuf, size_t n, loff_t *ppos) schedule(); set_current_state(TASK_INTERRUPTIBLE); } else { - lirc_buffer_read(&ir->buf, buf); + unsigned char buf[rx->buf.chunk_size]; + lirc_buffer_read(&rx->buf, buf); ret = copy_to_user((void *)outbuf+written, buf, - ir->buf.chunk_size); - written += ir->buf.chunk_size; + rx->buf.chunk_size); + written += rx->buf.chunk_size; } } - remove_wait_queue(&ir->buf.wait_poll, &wait); + remove_wait_queue(&rx->buf.wait_poll, &wait); set_current_state(TASK_RUNNING); - mutex_unlock(&ir->buf_lock); + mutex_unlock(&rx->buf_lock); dprintk("read result = %s (%d)\n", ret ? "-EFAULT" : "OK", ret); @@ -781,7 +798,7 @@ static ssize_t read(struct file *filep, char *outbuf, size_t n, loff_t *ppos) } /* send a keypress to the IR TX device */ -static int send_code(struct IR *ir, unsigned int code, unsigned int key) +static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key) { unsigned char data_block[TX_BLOCK_SIZE]; unsigned char buf[2]; @@ -798,26 +815,26 @@ static int send_code(struct IR *ir, unsigned int code, unsigned int key) return ret; /* Send the data block */ - ret = send_data_block(ir, data_block); + ret = send_data_block(tx, data_block); if (ret != 0) return ret; /* Send data block length? */ buf[0] = 0x00; buf[1] = 0x40; - ret = i2c_master_send(&ir->c_tx, buf, 2); + ret = i2c_master_send(&tx->c_tx, buf, 2); if (ret != 2) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } - ret = i2c_master_send(&ir->c_tx, buf, 1); + ret = i2c_master_send(&tx->c_tx, buf, 1); if (ret != 1) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } /* Send finished download? */ - ret = i2c_master_recv(&ir->c_tx, buf, 1); + ret = i2c_master_recv(&tx->c_tx, buf, 1); if (ret != 1) { zilog_error("i2c_master_recv failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; @@ -831,7 +848,7 @@ static int send_code(struct IR *ir, unsigned int code, unsigned int key) /* Send prepare command? */ buf[0] = 0x00; buf[1] = 0x80; - ret = i2c_master_send(&ir->c_tx, buf, 2); + ret = i2c_master_send(&tx->c_tx, buf, 2); if (ret != 2) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; @@ -842,7 +859,7 @@ static int send_code(struct IR *ir, unsigned int code, unsigned int key) * last i2c_master_recv always fails with a -5, so for now, we're * going to skip this whole mess and say we're done on the HD PVR */ - if (ir->is_hdpvr) { + if (!tx->post_tx_ready_poll) { dprintk("sent code %u, key %u\n", code, key); return 0; } @@ -856,7 +873,7 @@ static int send_code(struct IR *ir, unsigned int code, unsigned int key) for (i = 0; i < 20; ++i) { set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout((50 * HZ + 999) / 1000); - ret = i2c_master_send(&ir->c_tx, buf, 1); + ret = i2c_master_send(&tx->c_tx, buf, 1); if (ret == 1) break; dprintk("NAK expected: i2c_master_send " @@ -869,7 +886,7 @@ static int send_code(struct IR *ir, unsigned int code, unsigned int key) } /* Seems to be an 'ok' response */ - i = i2c_master_recv(&ir->c_tx, buf, 1); + i = i2c_master_recv(&tx->c_tx, buf, 1); if (i != 1) { zilog_error("i2c_master_recv failed with %d\n", ret); return -EFAULT; @@ -894,10 +911,11 @@ static ssize_t write(struct file *filep, const char *buf, size_t n, loff_t *ppos) { struct IR *ir = filep->private_data; + struct IR_tx *tx = ir->tx; size_t i; int failures = 0; - if (ir->c_tx.addr == 0) + if (tx == NULL) return -ENODEV; /* Validate user parameters */ @@ -918,15 +936,15 @@ static ssize_t write(struct file *filep, const char *buf, size_t n, } /* Send boot data first if required */ - if (ir->need_boot == 1) { - ret = send_boot_data(ir); + if (tx->need_boot == 1) { + ret = send_boot_data(tx); if (ret == 0) - ir->need_boot = 0; + tx->need_boot = 0; } /* Send the code */ if (ret == 0) { - ret = send_code(ir, (unsigned)command >> 16, + ret = send_code(tx, (unsigned)command >> 16, (unsigned)command & 0xFFFF); if (ret == -EPROTO) { mutex_unlock(&ir->ir_lock); @@ -951,7 +969,7 @@ static ssize_t write(struct file *filep, const char *buf, size_t n, } set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout((100 * HZ + 999) / 1000); - ir->need_boot = 1; + tx->need_boot = 1; ++failures; } else i += sizeof(int); @@ -968,22 +986,23 @@ static ssize_t write(struct file *filep, const char *buf, size_t n, static unsigned int poll(struct file *filep, poll_table *wait) { struct IR *ir = filep->private_data; + struct IR_rx *rx = ir->rx; unsigned int ret; dprintk("poll called\n"); - if (ir->c_rx.addr == 0) + if (rx == NULL) return -ENODEV; - mutex_lock(&ir->buf_lock); + mutex_lock(&rx->buf_lock); - poll_wait(filep, &ir->buf.wait_poll, wait); + poll_wait(filep, &rx->buf.wait_poll, wait); dprintk("poll result = %s\n", - lirc_buffer_empty(&ir->buf) ? "0" : "POLLIN|POLLRDNORM"); + lirc_buffer_empty(&rx->buf) ? "0" : "POLLIN|POLLRDNORM"); - ret = lirc_buffer_empty(&ir->buf) ? 0 : (POLLIN|POLLRDNORM); + ret = lirc_buffer_empty(&rx->buf) ? 0 : (POLLIN|POLLRDNORM); - mutex_unlock(&ir->buf_lock); + mutex_unlock(&rx->buf_lock); return ret; } @@ -993,9 +1012,9 @@ static long ioctl(struct file *filep, unsigned int cmd, unsigned long arg) int result; unsigned long mode, features = 0; - if (ir->c_rx.addr != 0) + if (ir->rx != NULL) features |= LIRC_CAN_REC_LIRCCODE; - if (ir->c_tx.addr != 0) + if (ir->tx != NULL) features |= LIRC_CAN_SEND_PULSE; switch (cmd) { @@ -1146,23 +1165,26 @@ static const struct file_operations lirc_fops = { static int ir_remove(struct i2c_client *client) { struct IR *ir = i2c_get_clientdata(client); + struct IR_rx *rx = ir->rx; + struct IR_tx *tx = ir->tx; + /* FIXME make tx, rx senitive */ mutex_lock(&ir->ir_lock); - if (ir->have_rx || ir->have_tx) { + if (rx != NULL || tx != NULL) { DECLARE_COMPLETION(tn); DECLARE_COMPLETION(tn2); /* end up polling thread */ - if (ir->task && !IS_ERR(ir->task)) { - ir->t_notify = &tn; - ir->t_notify2 = &tn2; - ir->shutdown = 1; - wake_up_process(ir->task); + if (rx->task && !IS_ERR(rx->task)) { + rx->t_notify = &tn; + rx->t_notify2 = &tn2; + rx->shutdown = 1; + wake_up_process(rx->task); complete(&tn2); wait_for_completion(&tn); - ir->t_notify = NULL; - ir->t_notify2 = NULL; + rx->t_notify = NULL; + rx->t_notify2 = NULL; } } else { @@ -1173,13 +1195,15 @@ static int ir_remove(struct i2c_client *client) } /* unregister lirc driver */ + /* FIXME make tx, rx senitive */ if (ir->l.minor >= 0 && ir->l.minor < MAX_IRCTL_DEVICES) { lirc_unregister_driver(ir->l.minor); ir_devices[ir->l.minor] = NULL; } /* free memory */ - lirc_buffer_free(&ir->buf); + /* FIXME make tx, rx senitive */ + lirc_buffer_free(&rx->buf); mutex_unlock(&ir->ir_lock); kfree(ir); @@ -1240,18 +1264,37 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) have_rx ? "RX only" : "TX only"); ir = kzalloc(sizeof(struct IR), GFP_KERNEL); - if (!ir) goto out_nomem; - ret = lirc_buffer_init(&ir->buf, 2, BUFLEN / 2); - if (ret) - goto out_nomem; + if (have_tx) { + ir->tx = kzalloc(sizeof(struct IR_tx), GFP_KERNEL); + if (ir->tx != NULL) { + ir->tx->need_boot = 1; + ir->tx->post_tx_ready_poll = + (id->driver_data & ID_FLAG_HDPVR) ? false : true; + } + } + + if (have_rx) { + ir->rx = kzalloc(sizeof(struct IR_rx), GFP_KERNEL); + + if (ir->rx == NULL) { + ret = -ENOMEM; + } else { + ir->rx->hdpvr_data_fmt = + (id->driver_data & ID_FLAG_HDPVR) ? true : false; + mutex_init(&ir->rx->buf_lock); + ret = lirc_buffer_init(&ir->rx->buf, 2, BUFLEN / 2); + } + + if (ret && (ir->rx != NULL)) { + kfree(ir->rx); + ir->rx = NULL; + } + } mutex_init(&ir->ir_lock); - mutex_init(&ir->buf_lock); - ir->need_boot = 1; - ir->is_hdpvr = (id->driver_data & ID_FLAG_HDPVR) ? true : false; memcpy(&ir->l, &lirc_template, sizeof(struct lirc_driver)); ir->l.minor = -1; @@ -1260,40 +1303,38 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) i2c_set_clientdata(client, ir); /* initialise RX device */ - if (have_rx) { + if (ir->rx != NULL) { DECLARE_COMPLETION(tn); - memcpy(&ir->c_rx, client, sizeof(struct i2c_client)); + memcpy(&ir->rx->c_rx, client, sizeof(struct i2c_client)); - ir->c_rx.addr = 0x71; - strlcpy(ir->c_rx.name, ZILOG_HAUPPAUGE_IR_RX_NAME, + ir->rx->c_rx.addr = 0x71; + strlcpy(ir->rx->c_rx.name, ZILOG_HAUPPAUGE_IR_RX_NAME, I2C_NAME_SIZE); /* try to fire up polling thread */ - ir->t_notify = &tn; - ir->task = kthread_run(lirc_thread, ir, "lirc_zilog"); - if (IS_ERR(ir->task)) { - ret = PTR_ERR(ir->task); + ir->rx->t_notify = &tn; + ir->rx->task = kthread_run(lirc_thread, ir, "lirc_zilog"); + if (IS_ERR(ir->rx->task)) { + ret = PTR_ERR(ir->rx->task); zilog_error("lirc_register_driver: cannot run " "poll thread %d\n", ret); goto err; } wait_for_completion(&tn); - ir->t_notify = NULL; - ir->have_rx = 1; + ir->rx->t_notify = NULL; } /* initialise TX device */ - if (have_tx) { - memcpy(&ir->c_tx, client, sizeof(struct i2c_client)); - ir->c_tx.addr = 0x70; - strlcpy(ir->c_tx.name, ZILOG_HAUPPAUGE_IR_TX_NAME, + if (ir->tx) { + memcpy(&ir->tx->c_tx, client, sizeof(struct i2c_client)); + ir->tx->c_tx.addr = 0x70; + strlcpy(ir->tx->c_tx.name, ZILOG_HAUPPAUGE_IR_TX_NAME, I2C_NAME_SIZE); - ir->have_tx = 1; } /* set lirc_dev stuff */ ir->l.code_length = 13; - ir->l.rbuf = &ir->buf; + ir->l.rbuf = (ir->rx == NULL) ? NULL : &ir->rx->buf; ir->l.fops = &lirc_fops; ir->l.data = ir; ir->l.minor = minor; @@ -1317,9 +1358,9 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) * after registering with lirc as otherwise hotplug seems to take * 10s to create the lirc device. */ - if (have_tx) { + if (ir->tx != NULL) { /* Special TX init */ - ret = tx_init(ir); + ret = tx_init(ir->tx); if (ret != 0) goto err; } @@ -1327,18 +1368,21 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) return 0; err: + /* FIXME - memory deallocation for all error cases needs work */ /* undo everything, hopefully... */ - if (ir->c_rx.addr) - ir_remove(&ir->c_rx); - if (ir->c_tx.addr) - ir_remove(&ir->c_tx); + if (ir->rx != NULL) + ir_remove(&ir->rx->c_rx); + if (ir->tx != NULL) + ir_remove(&ir->tx->c_tx); return ret; out_nodev: + /* FIXME - memory deallocation for all error cases needs work */ zilog_error("no device found\n"); return -ENODEV; out_nomem: + /* FIXME - memory deallocation for all error cases needs work */ zilog_error("memory allocation failure\n"); kfree(ir); return -ENOMEM; -- cgit v1.2.1 From e9b351f64f5c02acf6552d2109bc213bfa133388 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Fri, 14 Jan 2011 21:11:22 -0300 Subject: [media] lirc_zilog: Don't make private copies of i2c clients Don't make private copies of the i2c clients provided by the I2C subsystem, don't change the client address field, and don't probe the client addresses - the bridge driver already did that. This moves us to the proper I2C and binding model. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 87 +++++++++++++-------------------------- 1 file changed, 28 insertions(+), 59 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index 85e312f33513..00f2e7d3b3e5 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -62,7 +62,7 @@ struct IR_rx { /* RX device */ - struct i2c_client c_rx; + struct i2c_client *c; /* RX device buffer & lock */ struct lirc_buffer buf; @@ -81,7 +81,7 @@ struct IR_rx { struct IR_tx { /* TX device */ - struct i2c_client c_tx; + struct i2c_client *c; /* TX additional actions needed */ int need_boot; @@ -132,9 +132,6 @@ static struct mutex tx_data_lock; ## args) #define zilog_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args) -#define ZILOG_HAUPPAUGE_IR_RX_NAME "Zilog/Hauppauge IR RX" -#define ZILOG_HAUPPAUGE_IR_TX_NAME "Zilog/Hauppauge IR TX" - /* module parameters */ static int debug; /* debug output */ static int disable_rx; /* disable RX device */ @@ -181,7 +178,7 @@ static int add_to_buf(struct IR *ir) * Send random "poll command" (?) Windows driver does this * and it is a good point to detect chip failure. */ - ret = i2c_master_send(&rx->c_rx, sendbuf, 1); + ret = i2c_master_send(rx->c, sendbuf, 1); if (ret != 1) { zilog_error("i2c_master_send failed with %d\n", ret); if (failures >= 3) { @@ -205,7 +202,7 @@ static int add_to_buf(struct IR *ir) continue; } - ret = i2c_master_recv(&rx->c_rx, keybuf, sizeof(keybuf)); + ret = i2c_master_recv(rx->c, keybuf, sizeof(keybuf)); mutex_unlock(&ir->ir_lock); if (ret != sizeof(keybuf)) { zilog_error("i2c_master_recv failed with %d -- " @@ -315,9 +312,9 @@ static int set_use_inc(void *data) * must be possible even when the device is open */ if (ir->rx != NULL) - i2c_use_client(&ir->rx->c_rx); + i2c_use_client(ir->rx->c); if (ir->tx != NULL) - i2c_use_client(&ir->tx->c_tx); + i2c_use_client(ir->tx->c); return 0; } @@ -327,9 +324,9 @@ static void set_use_dec(void *data) struct IR *ir = data; if (ir->rx) - i2c_release_client(&ir->rx->c_rx); + i2c_release_client(ir->rx->c); if (ir->tx) - i2c_release_client(&ir->tx->c_tx); + i2c_release_client(ir->tx->c); if (ir->l.owner != NULL) module_put(ir->l.owner); } @@ -482,7 +479,7 @@ static int send_data_block(struct IR_tx *tx, unsigned char *data_block) buf[1 + j] = data_block[i + j]; dprintk("%02x %02x %02x %02x %02x", buf[0], buf[1], buf[2], buf[3], buf[4]); - ret = i2c_master_send(&tx->c_tx, buf, tosend + 1); + ret = i2c_master_send(tx->c, buf, tosend + 1); if (ret != tosend + 1) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; @@ -506,19 +503,19 @@ static int send_boot_data(struct IR_tx *tx) /* kick it off? */ buf[0] = 0x00; buf[1] = 0x20; - ret = i2c_master_send(&tx->c_tx, buf, 2); + ret = i2c_master_send(tx->c, buf, 2); if (ret != 2) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } - ret = i2c_master_send(&tx->c_tx, buf, 1); + ret = i2c_master_send(tx->c, buf, 1); if (ret != 1) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } /* Here comes the firmware version... (hopefully) */ - ret = i2c_master_recv(&tx->c_tx, buf, 4); + ret = i2c_master_recv(tx->c, buf, 4); if (ret != 4) { zilog_error("i2c_master_recv failed with %d\n", ret); return 0; @@ -573,7 +570,7 @@ static int fw_load(struct IR_tx *tx) } /* Request codeset data file */ - ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", &tx->c_tx.dev); + ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", &tx->c->dev); if (ret != 0) { zilog_error("firmware haup-ir-blaster.bin not available " "(%d)\n", ret); @@ -822,19 +819,19 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key) /* Send data block length? */ buf[0] = 0x00; buf[1] = 0x40; - ret = i2c_master_send(&tx->c_tx, buf, 2); + ret = i2c_master_send(tx->c, buf, 2); if (ret != 2) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } - ret = i2c_master_send(&tx->c_tx, buf, 1); + ret = i2c_master_send(tx->c, buf, 1); if (ret != 1) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } /* Send finished download? */ - ret = i2c_master_recv(&tx->c_tx, buf, 1); + ret = i2c_master_recv(tx->c, buf, 1); if (ret != 1) { zilog_error("i2c_master_recv failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; @@ -848,7 +845,7 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key) /* Send prepare command? */ buf[0] = 0x00; buf[1] = 0x80; - ret = i2c_master_send(&tx->c_tx, buf, 2); + ret = i2c_master_send(tx->c, buf, 2); if (ret != 2) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; @@ -873,7 +870,7 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key) for (i = 0; i < 20; ++i) { set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout((50 * HZ + 999) / 1000); - ret = i2c_master_send(&tx->c_tx, buf, 1); + ret = i2c_master_send(tx->c, buf, 1); if (ret == 1) break; dprintk("NAK expected: i2c_master_send " @@ -886,7 +883,7 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key) } /* Seems to be an 'ok' response */ - i = i2c_master_recv(&tx->c_tx, buf, 1); + i = i2c_master_recv(tx->c, buf, 1); if (i != 1) { zilog_error("i2c_master_recv failed with %d\n", ret); return -EFAULT; @@ -1214,7 +1211,6 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct IR *ir = NULL; struct i2c_adapter *adap = client->adapter; - char buf; int ret; int have_rx = 0, have_tx = 0; @@ -1239,24 +1235,13 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) * The external IR receiver is at i2c address 0x71. * The IR transmitter is at 0x70. */ - client->addr = 0x70; - if (i2c_master_recv(client, &buf, 1) == 1) + if (id->driver_data & ID_FLAG_TX) { have_tx = 1; - dprintk("probe 0x70 @ %s: %s\n", - adap->name, have_tx ? "success" : "failed"); - - if (!disable_rx) { - client->addr = 0x71; - if (i2c_master_recv(client, &buf, 1) == 1) - have_rx = 1; - dprintk("probe 0x71 @ %s: %s\n", - adap->name, have_rx ? "success" : "failed"); - } - - if (!(have_rx || have_tx)) { - zilog_error("%s: no devices found\n", adap->name); - goto out_nodev; + } else if (!disable_rx) { + have_rx = 1; + } else { + return -ENXIO; } printk(KERN_INFO "lirc_zilog: chip found with %s\n", @@ -1270,6 +1255,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) if (have_tx) { ir->tx = kzalloc(sizeof(struct IR_tx), GFP_KERNEL); if (ir->tx != NULL) { + ir->tx->c = client; ir->tx->need_boot = 1; ir->tx->post_tx_ready_poll = (id->driver_data & ID_FLAG_HDPVR) ? false : true; @@ -1282,6 +1268,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) if (ir->rx == NULL) { ret = -ENOMEM; } else { + ir->rx->c = client; ir->rx->hdpvr_data_fmt = (id->driver_data & ID_FLAG_HDPVR) ? true : false; mutex_init(&ir->rx->buf_lock); @@ -1305,11 +1292,6 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) /* initialise RX device */ if (ir->rx != NULL) { DECLARE_COMPLETION(tn); - memcpy(&ir->rx->c_rx, client, sizeof(struct i2c_client)); - - ir->rx->c_rx.addr = 0x71; - strlcpy(ir->rx->c_rx.name, ZILOG_HAUPPAUGE_IR_RX_NAME, - I2C_NAME_SIZE); /* try to fire up polling thread */ ir->rx->t_notify = &tn; @@ -1324,14 +1306,6 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) ir->rx->t_notify = NULL; } - /* initialise TX device */ - if (ir->tx) { - memcpy(&ir->tx->c_tx, client, sizeof(struct i2c_client)); - ir->tx->c_tx.addr = 0x70; - strlcpy(ir->tx->c_tx.name, ZILOG_HAUPPAUGE_IR_TX_NAME, - I2C_NAME_SIZE); - } - /* set lirc_dev stuff */ ir->l.code_length = 13; ir->l.rbuf = (ir->rx == NULL) ? NULL : &ir->rx->buf; @@ -1371,16 +1345,11 @@ err: /* FIXME - memory deallocation for all error cases needs work */ /* undo everything, hopefully... */ if (ir->rx != NULL) - ir_remove(&ir->rx->c_rx); + ir_remove(ir->rx->c); if (ir->tx != NULL) - ir_remove(&ir->tx->c_tx); + ir_remove(ir->tx->c); return ret; -out_nodev: - /* FIXME - memory deallocation for all error cases needs work */ - zilog_error("no device found\n"); - return -ENODEV; - out_nomem: /* FIXME - memory deallocation for all error cases needs work */ zilog_error("memory allocation failure\n"); -- cgit v1.2.1 From a68a9b73fbb05144a71b573f262fbc8ed8f71179 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 15 Jan 2011 01:04:06 -0300 Subject: [media] lirc_zilog: Extensive rework of ir_probe()/ir_remove() This patch is an extensive rework of the ir_probe() and ir_remove() functions. It removes all the double binding and allocation problems on module load. It removes almost all the memory leaks on module exit and on device instantiation failure. Proper destruction of the Rx polling kthread still needs investigation and more work, but it is no worse than it already was. This rework also had side effects that include: - encapsulation of the ir_devices[] array - serialization of access to the ir_devices[] array - semantic change of the module parameter "disable_rx" to "tx_only" If tx_only is true, the module does not claim the i2c_client for the IR Rx function, and only claims and handles the i2c_client for the IR Tx function. This is a first step in providing the option of letting ir-kbd-i2c.c handle IR Rx function, while lirc_zilog handles the IR Tx function. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 344 +++++++++++++++++++++++--------------- 1 file changed, 212 insertions(+), 132 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index 00f2e7d3b3e5..f2e8c63fa5bd 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -94,11 +94,13 @@ struct IR { struct mutex ir_lock; int open; + struct i2c_adapter *adapter; struct IR_rx *rx; struct IR_tx *tx; }; /* Minor -> data mapping */ +static struct mutex ir_devices_lock; static struct IR *ir_devices[MAX_IRCTL_DEVICES]; /* Block size for IR transmitter */ @@ -131,10 +133,11 @@ static struct mutex tx_data_lock; #define zilog_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, \ ## args) #define zilog_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args) +#define zilog_info(s, args...) printk(KERN_INFO KBUILD_MODNAME ": " s, ## args) /* module parameters */ static int debug; /* debug output */ -static int disable_rx; /* disable RX device */ +static int tx_only; /* only handle the IR Tx function */ static int minor = -1; /* minor number */ #define dprintk(fmt, args...) \ @@ -252,9 +255,6 @@ static int lirc_thread(void *arg) struct IR *ir = arg; struct IR_rx *rx = ir->rx; - if (rx == NULL) - return -ENXIO; - if (rx->t_notify != NULL) complete(rx->t_notify); @@ -296,6 +296,7 @@ static int lirc_thread(void *arg) complete(rx->t_notify); dprintk("poll thread ended\n"); + /* FIXME - investigate if this is the proper way to shutdown a kthread*/ return 0; } @@ -1058,6 +1059,15 @@ static long ioctl(struct file *filep, unsigned int cmd, unsigned long arg) return result; } +/* ir_devices_lock must be held */ +static struct IR *find_ir_device_by_minor(unsigned int minor) +{ + if (minor >= MAX_IRCTL_DEVICES) + return NULL; + + return ir_devices[minor]; +} + /* * Open the IR device. Get hold of our IR structure and * stash it in private_data for the file @@ -1066,15 +1076,15 @@ static int open(struct inode *node, struct file *filep) { struct IR *ir; int ret; + unsigned int minor = MINOR(node->i_rdev); /* find our IR struct */ - unsigned minor = MINOR(node->i_rdev); - if (minor >= MAX_IRCTL_DEVICES) { - dprintk("minor %d: open result = -ENODEV\n", - minor); + mutex_lock(&ir_devices_lock); + ir = find_ir_device_by_minor(minor); + mutex_unlock(&ir_devices_lock); + + if (ir == NULL) return -ENODEV; - } - ir = ir_devices[minor]; /* increment in use count */ mutex_lock(&ir->ir_lock); @@ -1159,136 +1169,203 @@ static const struct file_operations lirc_fops = { .release = close }; -static int ir_remove(struct i2c_client *client) +/* FIXME - investigate if this is the proper way to shutdown a kthread */ +static void destroy_rx_kthread(struct IR_rx *rx) { - struct IR *ir = i2c_get_clientdata(client); - struct IR_rx *rx = ir->rx; - struct IR_tx *tx = ir->tx; + DECLARE_COMPLETION(tn); + DECLARE_COMPLETION(tn2); - /* FIXME make tx, rx senitive */ - mutex_lock(&ir->ir_lock); + if (rx == NULL) + return; + + /* end up polling thread */ + if (rx->task && !IS_ERR(rx->task)) { + rx->t_notify = &tn; + rx->t_notify2 = &tn2; + rx->shutdown = 1; + wake_up_process(rx->task); + complete(&tn2); + wait_for_completion(&tn); + rx->t_notify = NULL; + rx->t_notify2 = NULL; + } +} - if (rx != NULL || tx != NULL) { - DECLARE_COMPLETION(tn); - DECLARE_COMPLETION(tn2); - - /* end up polling thread */ - if (rx->task && !IS_ERR(rx->task)) { - rx->t_notify = &tn; - rx->t_notify2 = &tn2; - rx->shutdown = 1; - wake_up_process(rx->task); - complete(&tn2); - wait_for_completion(&tn); - rx->t_notify = NULL; - rx->t_notify2 = NULL; +/* ir_devices_lock must be held */ +static int add_ir_device(struct IR *ir) +{ + int i; + + for (i = 0; i < MAX_IRCTL_DEVICES; i++) + if (ir_devices[i] == NULL) { + ir_devices[i] = ir; + break; } - } else { - mutex_unlock(&ir->ir_lock); - zilog_error("%s: detached from something we didn't " - "attach to\n", __func__); - return -ENODEV; + return i == MAX_IRCTL_DEVICES ? -ENOMEM : i; +} + +/* ir_devices_lock must be held */ +static void del_ir_device(struct IR *ir) +{ + int i; + + for (i = 0; i < MAX_IRCTL_DEVICES; i++) + if (ir_devices[i] == ir) { + ir_devices[i] = NULL; + break; + } +} + +static int ir_remove(struct i2c_client *client) +{ + struct IR *ir = i2c_get_clientdata(client); + + mutex_lock(&ir_devices_lock); + + if (ir == NULL) { + /* We destroyed everything when the first client came through */ + mutex_unlock(&ir_devices_lock); + return 0; } - /* unregister lirc driver */ - /* FIXME make tx, rx senitive */ - if (ir->l.minor >= 0 && ir->l.minor < MAX_IRCTL_DEVICES) { - lirc_unregister_driver(ir->l.minor); - ir_devices[ir->l.minor] = NULL; + /* Good-bye LIRC */ + lirc_unregister_driver(ir->l.minor); + + /* Good-bye Rx */ + destroy_rx_kthread(ir->rx); + if (ir->rx != NULL) { + if (ir->rx->buf.fifo_initialized) + lirc_buffer_free(&ir->rx->buf); + i2c_set_clientdata(ir->rx->c, NULL); + kfree(ir->rx); } - /* free memory */ - /* FIXME make tx, rx senitive */ - lirc_buffer_free(&rx->buf); - mutex_unlock(&ir->ir_lock); + /* Good-bye Tx */ + i2c_set_clientdata(ir->tx->c, NULL); + kfree(ir->tx); + + /* Good-bye IR */ + del_ir_device(ir); kfree(ir); + mutex_unlock(&ir_devices_lock); return 0; } -static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) + +/* ir_devices_lock must be held */ +static struct IR *find_ir_device_by_adapter(struct i2c_adapter *adapter) { + int i; struct IR *ir = NULL; + + for (i = 0; i < MAX_IRCTL_DEVICES; i++) + if (ir_devices[i] != NULL && + ir_devices[i]->adapter == adapter) { + ir = ir_devices[i]; + break; + } + + return ir; +} + +static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct IR *ir; struct i2c_adapter *adap = client->adapter; int ret; - int have_rx = 0, have_tx = 0; + bool tx_probe = false; dprintk("%s: %s on i2c-%d (%s), client addr=0x%02x\n", __func__, id->name, adap->nr, adap->name, client->addr); /* - * FIXME - This probe function probes both the Tx and Rx - * addresses of the IR microcontroller. - * - * However, the I2C subsystem is passing along one I2C client at a - * time, based on matches to the ir_transceiver_id[] table above. - * The expectation is that each i2c_client address will be probed - * individually by drivers so the I2C subsystem can mark all client - * addresses as claimed or not. - * - * This probe routine causes only one of the client addresses, TX or RX, - * to be claimed. This will cause a problem if the I2C subsystem is - * subsequently triggered to probe unclaimed clients again. - */ - /* - * The external IR receiver is at i2c address 0x71. - * The IR transmitter is at 0x70. + * The IR receiver is at i2c address 0x71. + * The IR transmitter is at i2c address 0x70. */ - if (id->driver_data & ID_FLAG_TX) { - have_tx = 1; - } else if (!disable_rx) { - have_rx = 1; - } else { + if (id->driver_data & ID_FLAG_TX) + tx_probe = true; + else if (tx_only) /* module option */ return -ENXIO; - } - printk(KERN_INFO "lirc_zilog: chip found with %s\n", - have_rx && have_tx ? "RX and TX" : - have_rx ? "RX only" : "TX only"); + zilog_info("%s: probing IR %s on %s (i2c-%d)\n", + __func__, tx_probe ? "Tx" : "Rx", adap->name, adap->nr); - ir = kzalloc(sizeof(struct IR), GFP_KERNEL); - if (!ir) - goto out_nomem; + mutex_lock(&ir_devices_lock); - if (have_tx) { - ir->tx = kzalloc(sizeof(struct IR_tx), GFP_KERNEL); - if (ir->tx != NULL) { - ir->tx->c = client; - ir->tx->need_boot = 1; - ir->tx->post_tx_ready_poll = - (id->driver_data & ID_FLAG_HDPVR) ? false : true; + /* Use a single struct IR instance for both the Rx and Tx functions */ + ir = find_ir_device_by_adapter(adap); + if (ir == NULL) { + ir = kzalloc(sizeof(struct IR), GFP_KERNEL); + if (ir == NULL) { + ret = -ENOMEM; + goto out_no_ir; } + /* store for use in ir_probe() again, and open() later on */ + ret = add_ir_device(ir); + if (ret) + goto out_free_ir; + + ir->adapter = adap; + mutex_init(&ir->ir_lock); + + /* set lirc_dev stuff */ + memcpy(&ir->l, &lirc_template, sizeof(struct lirc_driver)); + ir->l.minor = minor; /* module option */ + ir->l.code_length = 13; + ir->l.rbuf = NULL; + ir->l.fops = &lirc_fops; + ir->l.data = ir; + ir->l.dev = &adap->dev; + ir->l.sample_rate = 0; } - if (have_rx) { - ir->rx = kzalloc(sizeof(struct IR_rx), GFP_KERNEL); + if (tx_probe) { + /* Set up a struct IR_tx instance */ + ir->tx = kzalloc(sizeof(struct IR_tx), GFP_KERNEL); + if (ir->tx == NULL) { + ret = -ENOMEM; + goto out_free_xx; + } + ir->tx->c = client; + ir->tx->need_boot = 1; + ir->tx->post_tx_ready_poll = + (id->driver_data & ID_FLAG_HDPVR) ? false : true; + } else { + /* Set up a struct IR_rx instance */ + ir->rx = kzalloc(sizeof(struct IR_rx), GFP_KERNEL); if (ir->rx == NULL) { ret = -ENOMEM; - } else { - ir->rx->c = client; - ir->rx->hdpvr_data_fmt = - (id->driver_data & ID_FLAG_HDPVR) ? true : false; - mutex_init(&ir->rx->buf_lock); - ret = lirc_buffer_init(&ir->rx->buf, 2, BUFLEN / 2); + goto out_free_xx; } - if (ret && (ir->rx != NULL)) { - kfree(ir->rx); - ir->rx = NULL; - } - } + ret = lirc_buffer_init(&ir->rx->buf, 2, BUFLEN / 2); + if (ret) + goto out_free_xx; - mutex_init(&ir->ir_lock); + mutex_init(&ir->rx->buf_lock); + ir->rx->c = client; + ir->rx->hdpvr_data_fmt = + (id->driver_data & ID_FLAG_HDPVR) ? true : false; - memcpy(&ir->l, &lirc_template, sizeof(struct lirc_driver)); - ir->l.minor = -1; + /* set lirc_dev stuff */ + ir->l.rbuf = &ir->rx->buf; + } - /* I2C attach to device */ i2c_set_clientdata(client, ir); + /* Proceed only if we have the required Tx and Rx clients ready to go */ + if (ir->tx == NULL || + (ir->rx == NULL && !tx_only)) { + zilog_info("%s: probe of IR %s on %s (i2c-%d) done, waiting on " + "IR %s\n", __func__, tx_probe ? "Tx" : "Rx", + adap->name, adap->nr, tx_probe ? "Rx" : "Tx"); + goto out_ok; + } + /* initialise RX device */ if (ir->rx != NULL) { DECLARE_COMPLETION(tn); @@ -1298,35 +1375,23 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) ir->rx->task = kthread_run(lirc_thread, ir, "lirc_zilog"); if (IS_ERR(ir->rx->task)) { ret = PTR_ERR(ir->rx->task); - zilog_error("lirc_register_driver: cannot run " - "poll thread %d\n", ret); - goto err; + zilog_error("%s: could not start IR Rx polling thread" + "\n", __func__); + goto out_free_xx; } wait_for_completion(&tn); ir->rx->t_notify = NULL; } - /* set lirc_dev stuff */ - ir->l.code_length = 13; - ir->l.rbuf = (ir->rx == NULL) ? NULL : &ir->rx->buf; - ir->l.fops = &lirc_fops; - ir->l.data = ir; - ir->l.minor = minor; - ir->l.dev = &adap->dev; - ir->l.sample_rate = 0; - /* register with lirc */ ir->l.minor = lirc_register_driver(&ir->l); if (ir->l.minor < 0 || ir->l.minor >= MAX_IRCTL_DEVICES) { - zilog_error("ir_attach: \"minor\" must be between 0 and %d " - "(%d)!\n", MAX_IRCTL_DEVICES-1, ir->l.minor); + zilog_error("%s: \"minor\" must be between 0 and %d (%d)!\n", + __func__, MAX_IRCTL_DEVICES-1, ir->l.minor); ret = -EBADRQC; - goto err; + goto out_free_thread; } - /* store this for getting back in open() later on */ - ir_devices[ir->l.minor] = ir; - /* * if we have the tx device, load the 'firmware'. We do this * after registering with lirc as otherwise hotplug seems to take @@ -1336,25 +1401,39 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) /* Special TX init */ ret = tx_init(ir->tx); if (ret != 0) - goto err; + goto out_unregister; } +out_ok: + mutex_unlock(&ir_devices_lock); return 0; -err: - /* FIXME - memory deallocation for all error cases needs work */ - /* undo everything, hopefully... */ - if (ir->rx != NULL) - ir_remove(ir->rx->c); - if (ir->tx != NULL) - ir_remove(ir->tx->c); - return ret; - -out_nomem: - /* FIXME - memory deallocation for all error cases needs work */ - zilog_error("memory allocation failure\n"); +out_unregister: + lirc_unregister_driver(ir->l.minor); +out_free_thread: + destroy_rx_kthread(ir->rx); +out_free_xx: + if (ir->rx != NULL) { + if (ir->rx->buf.fifo_initialized) + lirc_buffer_free(&ir->rx->buf); + if (ir->rx->c != NULL) + i2c_set_clientdata(ir->rx->c, NULL); + kfree(ir->rx); + } + if (ir->tx != NULL) { + if (ir->tx->c != NULL) + i2c_set_clientdata(ir->tx->c, NULL); + kfree(ir->tx); + } +out_free_ir: + del_ir_device(ir); kfree(ir); - return -ENOMEM; +out_no_ir: + zilog_error("%s: probing IR %s on %s (i2c-%d) failed with %d\n", + __func__, tx_probe ? "Tx" : "Rx", adap->name, adap->nr, + ret); + mutex_unlock(&ir_devices_lock); + return ret; } static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg) @@ -1370,6 +1449,7 @@ static int __init zilog_init(void) zilog_notify("Zilog/Hauppauge IR driver initializing\n"); mutex_init(&tx_data_lock); + mutex_init(&ir_devices_lock); request_module("firmware_class"); @@ -1406,5 +1486,5 @@ MODULE_PARM_DESC(minor, "Preferred minor device number"); module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Enable debugging messages"); -module_param(disable_rx, bool, 0644); -MODULE_PARM_DESC(disable_rx, "Disable the IR receiver device"); +module_param(tx_only, bool, 0644); +MODULE_PARM_DESC(tx_only, "Only handle the IR transmit function"); -- cgit v1.2.1 From b757730b022b4b1367d0435fcaa1b0a01e8aef42 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 15 Jan 2011 22:02:05 -0300 Subject: [media] lirc_zilog: Update IR Rx polling kthread start/stop and some printks The IR Rx polling thread was originally a kernel_thread long ago, and had only been minimally converted to a kthread. This patch finishes that conversion by - cleaning up all the unneeded completions - destroying the kthread properly by calling kthread_stop() - changing lirc_thread() to test kthread_should_stop() just before every point where it may sleep - reorganizing the lirc_thread() function so it uses fewer lines - modifying the name of the kthread from "lirc_zilog" to "zilog-rx-i2c-N", so ps will show which kthread polls which Zilog Z8 IR unit. Also some minor tweaks were made to logging emitted by the ir_probe() function. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 113 +++++++++++++++++--------------------- 1 file changed, 49 insertions(+), 64 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index f2e8c63fa5bd..f7aa5e4e98b3 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -69,9 +69,6 @@ struct IR_rx { struct mutex buf_lock; /* RX polling thread data */ - struct completion *t_notify; - struct completion *t_notify2; - int shutdown; struct task_struct *task; /* RX read data */ @@ -171,12 +168,20 @@ static int add_to_buf(struct IR *ir) * data and we have space */ do { + if (kthread_should_stop()) + return -ENODATA; + /* * Lock i2c bus for the duration. RX/TX chips interfere so * this is worth it */ mutex_lock(&ir->ir_lock); + if (kthread_should_stop()) { + mutex_unlock(&ir->ir_lock); + return -ENODATA; + } + /* * Send random "poll command" (?) Windows driver does this * and it is a good point to detect chip failure. @@ -196,6 +201,10 @@ static int add_to_buf(struct IR *ir) "trying reset\n"); set_current_state(TASK_UNINTERRUPTIBLE); + if (kthread_should_stop()) { + mutex_unlock(&ir->ir_lock); + return -ENODATA; + } schedule_timeout((100 * HZ + 999) / 1000); if (ir->tx != NULL) ir->tx->need_boot = 1; @@ -205,6 +214,10 @@ static int add_to_buf(struct IR *ir) continue; } + if (kthread_should_stop()) { + mutex_unlock(&ir->ir_lock); + return -ENODATA; + } ret = i2c_master_recv(rx->c, keybuf, sizeof(keybuf)); mutex_unlock(&ir->ir_lock); if (ret != sizeof(keybuf)) { @@ -255,48 +268,35 @@ static int lirc_thread(void *arg) struct IR *ir = arg; struct IR_rx *rx = ir->rx; - if (rx->t_notify != NULL) - complete(rx->t_notify); - dprintk("poll thread started\n"); - do { - if (ir->open) { - set_current_state(TASK_INTERRUPTIBLE); + while (!kthread_should_stop()) { + set_current_state(TASK_INTERRUPTIBLE); - /* - * This is ~113*2 + 24 + jitter (2*repeat gap + - * code length). We use this interval as the chip - * resets every time you poll it (bad!). This is - * therefore just sufficient to catch all of the - * button presses. It makes the remote much more - * responsive. You can see the difference by - * running irw and holding down a button. With - * 100ms, the old polling interval, you'll notice - * breaks in the repeat sequence corresponding to - * lost keypresses. - */ - schedule_timeout((260 * HZ) / 1000); - if (rx->shutdown) - break; - if (!add_to_buf(ir)) - wake_up_interruptible(&rx->buf.wait_poll); - } else { - /* if device not opened so we can sleep half a second */ - set_current_state(TASK_INTERRUPTIBLE); + /* if device not opened, we can sleep half a second */ + if (!ir->open) { schedule_timeout(HZ/2); + continue; } - } while (!rx->shutdown); - if (rx->t_notify2 != NULL) - wait_for_completion(rx->t_notify2); - - rx->task = NULL; - if (rx->t_notify != NULL) - complete(rx->t_notify); + /* + * This is ~113*2 + 24 + jitter (2*repeat gap + code length). + * We use this interval as the chip resets every time you poll + * it (bad!). This is therefore just sufficient to catch all + * of the button presses. It makes the remote much more + * responsive. You can see the difference by running irw and + * holding down a button. With 100ms, the old polling + * interval, you'll notice breaks in the repeat sequence + * corresponding to lost keypresses. + */ + schedule_timeout((260 * HZ) / 1000); + if (kthread_should_stop()) + break; + if (!add_to_buf(ir)) + wake_up_interruptible(&rx->buf.wait_poll); + } dprintk("poll thread ended\n"); - /* FIXME - investigate if this is the proper way to shutdown a kthread*/ return 0; } @@ -1169,25 +1169,12 @@ static const struct file_operations lirc_fops = { .release = close }; -/* FIXME - investigate if this is the proper way to shutdown a kthread */ static void destroy_rx_kthread(struct IR_rx *rx) { - DECLARE_COMPLETION(tn); - DECLARE_COMPLETION(tn2); - - if (rx == NULL) - return; - /* end up polling thread */ - if (rx->task && !IS_ERR(rx->task)) { - rx->t_notify = &tn; - rx->t_notify2 = &tn2; - rx->shutdown = 1; - wake_up_process(rx->task); - complete(&tn2); - wait_for_completion(&tn); - rx->t_notify = NULL; - rx->t_notify2 = NULL; + if (rx != NULL && !IS_ERR_OR_NULL(rx->task)) { + kthread_stop(rx->task); + rx->task = NULL; } } @@ -1290,8 +1277,8 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) else if (tx_only) /* module option */ return -ENXIO; - zilog_info("%s: probing IR %s on %s (i2c-%d)\n", - __func__, tx_probe ? "Tx" : "Rx", adap->name, adap->nr); + zilog_info("probing IR %s on %s (i2c-%d)\n", + tx_probe ? "Tx" : "Rx", adap->name, adap->nr); mutex_lock(&ir_devices_lock); @@ -1360,27 +1347,23 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) /* Proceed only if we have the required Tx and Rx clients ready to go */ if (ir->tx == NULL || (ir->rx == NULL && !tx_only)) { - zilog_info("%s: probe of IR %s on %s (i2c-%d) done, waiting on " - "IR %s\n", __func__, tx_probe ? "Tx" : "Rx", - adap->name, adap->nr, tx_probe ? "Rx" : "Tx"); + zilog_info("probe of IR %s on %s (i2c-%d) done. Waiting on " + "IR %s.\n", tx_probe ? "Tx" : "Rx", adap->name, + adap->nr, tx_probe ? "Rx" : "Tx"); goto out_ok; } /* initialise RX device */ if (ir->rx != NULL) { - DECLARE_COMPLETION(tn); - /* try to fire up polling thread */ - ir->rx->t_notify = &tn; - ir->rx->task = kthread_run(lirc_thread, ir, "lirc_zilog"); + ir->rx->task = kthread_run(lirc_thread, ir, + "zilog-rx-i2c-%d", adap->nr); if (IS_ERR(ir->rx->task)) { ret = PTR_ERR(ir->rx->task); zilog_error("%s: could not start IR Rx polling thread" "\n", __func__); goto out_free_xx; } - wait_for_completion(&tn); - ir->rx->t_notify = NULL; } /* register with lirc */ @@ -1404,6 +1387,8 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) goto out_unregister; } + zilog_info("probe of IR %s on %s (i2c-%d) done. IR unit ready.\n", + tx_probe ? "Tx" : "Rx", adap->name, adap->nr); out_ok: mutex_unlock(&ir_devices_lock); return 0; -- cgit v1.2.1 From 8090232a237ab62e22307fc060097da1a283dd66 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 15 Jan 2011 22:32:33 -0300 Subject: [media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function The driver is now structured so that it must handle an IR Tx unit for a Z8 IR chip, or it refuses to handle that Z8 IR chip. This allows us to assume that ir->tx != NULL in a few places in the driver, and also allows us to always report Tx is available to userspace. Get rid of unneeded tests for ir->tx == NULL and always report that Tx is available. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 21 +++++---------------- 1 file changed, 5 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index f7aa5e4e98b3..24d4b52bd79e 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -206,8 +206,7 @@ static int add_to_buf(struct IR *ir) return -ENODATA; } schedule_timeout((100 * HZ + 999) / 1000); - if (ir->tx != NULL) - ir->tx->need_boot = 1; + ir->tx->need_boot = 1; ++failures; mutex_unlock(&ir->ir_lock); @@ -1010,10 +1009,9 @@ static long ioctl(struct file *filep, unsigned int cmd, unsigned long arg) int result; unsigned long mode, features = 0; + features |= LIRC_CAN_SEND_PULSE; if (ir->rx != NULL) features |= LIRC_CAN_REC_LIRCCODE; - if (ir->tx != NULL) - features |= LIRC_CAN_SEND_PULSE; switch (cmd) { case LIRC_GET_LENGTH: @@ -1040,15 +1038,9 @@ static long ioctl(struct file *filep, unsigned int cmd, unsigned long arg) result = -EINVAL; break; case LIRC_GET_SEND_MODE: - if (!(features&LIRC_CAN_SEND_MASK)) - return -ENOSYS; - result = put_user(LIRC_MODE_PULSE, (unsigned long *) arg); break; case LIRC_SET_SEND_MODE: - if (!(features&LIRC_CAN_SEND_MASK)) - return -ENOSYS; - result = get_user(mode, (unsigned long *) arg); if (!result && mode != LIRC_MODE_PULSE) return -EINVAL; @@ -1380,12 +1372,9 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) * after registering with lirc as otherwise hotplug seems to take * 10s to create the lirc device. */ - if (ir->tx != NULL) { - /* Special TX init */ - ret = tx_init(ir->tx); - if (ret != 0) - goto out_unregister; - } + ret = tx_init(ir->tx); + if (ret != 0) + goto out_unregister; zilog_info("probe of IR %s on %s (i2c-%d) done. IR unit ready.\n", tx_probe ? "Tx" : "Rx", adap->name, adap->nr); -- cgit v1.2.1 From 6830661ead850c0722e698da5c389db4d85079be Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 15 Jan 2011 22:56:42 -0300 Subject: [media] lirc_zilog: Remove useless struct i2c_driver.command function The ir_command() function is a do-nothing stub; remove it. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index 24d4b52bd79e..18fae5442c36 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -1123,7 +1123,6 @@ static struct lirc_driver lirc_template = { static int ir_remove(struct i2c_client *client); static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id); -static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg); #define ID_FLAG_TX 0x01 #define ID_FLAG_HDPVR 0x02 @@ -1143,7 +1142,6 @@ static struct i2c_driver driver = { }, .probe = ir_probe, .remove = ir_remove, - .command = ir_command, .id_table = ir_transceiver_id, }; @@ -1410,12 +1408,6 @@ out_no_ir: return ret; } -static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg) -{ - /* nothing */ - return 0; -} - static int __init zilog_init(void) { int ret; -- cgit v1.2.1 From c2790c7192be661e14b3d13d8bc187fd87bb9802 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 16 Jan 2011 15:20:07 -0300 Subject: [media] lirc_zilog: Add Andy Walls to copyright notice and authors list Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index 18fae5442c36..3fe5f4160194 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -20,6 +20,9 @@ * * parts are cut&pasted from the lirc_i2c.c driver * + * Numerous changes updating lirc_zilog.c in kernel 2.6.38 and later are + * Copyright (C) 2011 Andy Walls + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -1441,7 +1444,8 @@ module_exit(zilog_exit); MODULE_DESCRIPTION("Zilog/Hauppauge infrared transmitter driver (i2c stack)"); MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, " - "Ulrich Mueller, Stefan Jahn, Jerome Brock, Mark Weaver"); + "Ulrich Mueller, Stefan Jahn, Jerome Brock, Mark Weaver, " + "Andy Walls"); MODULE_LICENSE("GPL"); /* for compat with old name, which isn't all that accurate anymore */ MODULE_ALIAS("lirc_pvr150"); -- cgit v1.2.1 From 1f1bfaa0a2e97fbeaf6cc5a07212de0afa3a6232 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 16 Jan 2011 15:21:27 -0300 Subject: [media] lirc_zilog: Update TODO.lirc_zilog Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/TODO.lirc_zilog | 36 ++++++++++++++++++++++++++++++------ 1 file changed, 30 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/lirc/TODO.lirc_zilog b/drivers/staging/lirc/TODO.lirc_zilog index 6aa312df4018..2d0263f07937 100644 --- a/drivers/staging/lirc/TODO.lirc_zilog +++ b/drivers/staging/lirc/TODO.lirc_zilog @@ -1,13 +1,37 @@ -The binding between hdpvr and lirc_zilog is currently disabled, +1. Both ir-kbd-i2c and lirc_zilog provide support for RX events. +The 'tx_only' lirc_zilog module parameter will allow ir-kbd-i2c +and lirc_zilog to coexist in the kernel, if the user requires such a set-up. +However the IR unit will not work well without coordination between the +two modules. A shared mutex, for transceiver access locking, needs to be +supplied by bridge drivers, in struct IR_i2_init_data, to both ir-kbd-i2c +and lirc_zilog, before they will coexist usefully. This should be fixed +before moving out of staging. + +2. References and locking need careful examination. For cx18 and ivtv PCI +cards, which are not easily "hot unplugged", the imperfect state of reference +counting and locking is acceptable if not correct. For USB connected units +like HD PVR, PVR USB2, HVR-1900, and HVR1950, the likelyhood of an Ooops on +unplug is probably great. Proper reference counting and locking needs to be +implemented before this module is moved out of staging. + +3. The binding between hdpvr and lirc_zilog is currently disabled, due to an OOPS reported a few years ago when both the hdpvr and cx18 drivers were loaded in his system. More details can be seen at: http://www.mail-archive.com/linux-media@vger.kernel.org/msg09163.html More tests need to be done, in order to fix the reported issue. -There's a conflict between ir-kbd-i2c: Both provide support for RX events. -Such conflict needs to be fixed, before moving it out of staging. +4. In addition to providing a shared mutex for transceiver access +locking, bridge drivers, if able, should provide a chip reset() callback +to lirc_zilog via struct IR_i2c_init_data. cx18 and ivtv already have routines +to perform Z8 chip resets via GPIO manipulations. This will allow lirc_zilog +to bring the chip back to normal when it hangs, in the same places the +original lirc_pvr150 driver code does. This is not strictly needed, so it +is not required to move lirc_zilog out of staging. + +5. Both lirc_zilog and ir-kbd-i2c support the Zilog Z8 for IR, as programmed +and installed on Hauppauge products. When working on either module, developers +must consider at least the following bridge drivers which mention an IR Rx unit +at address 0x71 (indicative of a Z8): -The way I2C probe works, it will try to register the driver twice, one -for RX and another for TX. The logic needs to be fixed to avoid such -issue. + ivtv cx18 hdpvr pvrusb2 bt8xx cx88 saa7134 -- cgit v1.2.1 From c69a4af6f06916936c8afd44a175e2bf1fbefaec Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 16 Jan 2011 15:45:32 -0300 Subject: [media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71 This reverts a portion of commit 44243fc2ef99948bc9b046901880885616dd5e89 A commit for which I errantly recommended that defaults for I2C address 0x71 not be set by ir-kbd-i2c.c The pvrusb2 and bttv drivers currently rely on ir-kbd-i2c setting defaults for that address. Until I can get those bridge drivers fixed to properly send IR_i2c_init_data for boards with Zilog Z8 chips, just add back the default settings for I2C address 0x71. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ir-kbd-i2c.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index b173e409cd28..d2b20ad383a3 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -323,6 +323,12 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) rc_type = RC_TYPE_OTHER; ir_codes = RC_MAP_AVERMEDIA_CARDBUS; break; + case 0x71: + name = "Hauppauge/Zilog Z8"; + ir->get_key = get_key_haup_xvr; + rc_type = RC_TYPE_RC5; + ir_codes = hauppauge ? RC_MAP_HAUPPAUGE_NEW : RC_MAP_RC5_TV; + break; } /* Let the caller override settings */ -- cgit v1.2.1 From 4999e27a62eaf28e88bc69ab8cf11697e0dda261 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 16 Jan 2011 21:21:03 -0300 Subject: [media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c When registering an IR Rx device with the I2C subsystem, provide more detailed information about the IR device and default remote configuration for the IR driver modules. Also explicitly register any IR Tx device with the I2C subsystem. Signed-off-by: Andy Walls Acked-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h | 2 + drivers/media/video/pvrusb2/pvrusb2-i2c-core.c | 62 +++++++++++++++------- 2 files changed, 45 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h index ac94a8bf883e..305e6aaa844a 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h @@ -40,6 +40,7 @@ #include "pvrusb2-io.h" #include #include +#include #include "pvrusb2-devattr.h" /* Legal values for PVR2_CID_HSM */ @@ -202,6 +203,7 @@ struct pvr2_hdw { /* IR related */ unsigned int ir_scheme_active; /* IR scheme as seen from the outside */ + struct IR_i2c_init_data ir_init_data; /* params passed to IR modules */ /* Frequency table */ unsigned int freqTable[FREQTABLE_SIZE]; diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index 7cbe18c4ca95..ccc884948f34 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -19,6 +19,7 @@ */ #include +#include #include "pvrusb2-i2c-core.h" #include "pvrusb2-hdw-internal.h" #include "pvrusb2-debug.h" @@ -48,13 +49,6 @@ module_param_named(disable_autoload_ir_video, pvr2_disable_ir_video, MODULE_PARM_DESC(disable_autoload_ir_video, "1=do not try to autoload ir_video IR receiver"); -/* Mapping of IR schemes to known I2C addresses - if any */ -static const unsigned char ir_video_addresses[] = { - [PVR2_IR_SCHEME_ZILOG] = 0x71, - [PVR2_IR_SCHEME_29XXX] = 0x18, - [PVR2_IR_SCHEME_24XXX] = 0x18, -}; - static int pvr2_i2c_write(struct pvr2_hdw *hdw, /* Context */ u8 i2c_addr, /* I2C address we're talking to */ u8 *data, /* Data to write */ @@ -574,26 +568,56 @@ static void do_i2c_scan(struct pvr2_hdw *hdw) static void pvr2_i2c_register_ir(struct pvr2_hdw *hdw) { struct i2c_board_info info; - unsigned char addr = 0; + struct IR_i2c_init_data *init_data = &hdw->ir_init_data; if (pvr2_disable_ir_video) { pvr2_trace(PVR2_TRACE_INFO, "Automatic binding of ir_video has been disabled."); return; } - if (hdw->ir_scheme_active < ARRAY_SIZE(ir_video_addresses)) { - addr = ir_video_addresses[hdw->ir_scheme_active]; - } - if (!addr) { + memset(&info, 0, sizeof(struct i2c_board_info)); + switch (hdw->ir_scheme_active) { + case PVR2_IR_SCHEME_24XXX: /* FX2-controlled IR */ + case PVR2_IR_SCHEME_29XXX: /* Original 29xxx device */ + init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW; + init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP; + init_data->type = RC_TYPE_RC5; + init_data->name = hdw->hdw_desc->description; + init_data->polling_interval = 100; /* ms From ir-kbd-i2c */ + /* IR Receiver */ + info.addr = 0x18; + info.platform_data = init_data; + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + pvr2_trace(PVR2_TRACE_INFO, "Binding %s to i2c address 0x%02x.", + info.type, info.addr); + i2c_new_device(&hdw->i2c_adap, &info); + break; + case PVR2_IR_SCHEME_ZILOG: /* HVR-1950 style */ + case PVR2_IR_SCHEME_24XXX_MCE: /* 24xxx MCE device */ + init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW; + init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; + init_data->type = RC_TYPE_RC5; + init_data->name = hdw->hdw_desc->description; + init_data->polling_interval = 260; /* ms From lirc_zilog */ + /* IR Receiver */ + info.addr = 0x71; + info.platform_data = init_data; + strlcpy(info.type, "ir_rx_z8f0811_haup", I2C_NAME_SIZE); + pvr2_trace(PVR2_TRACE_INFO, "Binding %s to i2c address 0x%02x.", + info.type, info.addr); + i2c_new_device(&hdw->i2c_adap, &info); + /* IR Trasmitter */ + info.addr = 0x70; + info.platform_data = init_data; + strlcpy(info.type, "ir_tx_z8f0811_haup", I2C_NAME_SIZE); + pvr2_trace(PVR2_TRACE_INFO, "Binding %s to i2c address 0x%02x.", + info.type, info.addr); + i2c_new_device(&hdw->i2c_adap, &info); + break; + default: /* The device either doesn't support I2C-based IR or we don't know (yet) how to operate IR on the device. */ - return; + break; } - pvr2_trace(PVR2_TRACE_INFO, - "Binding ir_video to i2c address 0x%02x.", addr); - memset(&info, 0, sizeof(struct i2c_board_info)); - strlcpy(info.type, "ir_video", I2C_NAME_SIZE); - info.addr = addr; - i2c_new_device(&hdw->i2c_adap, &info); } void pvr2_i2c_core_init(struct pvr2_hdw *hdw) -- cgit v1.2.1 From c959acfddb3d24ecfdae1a280a7a1785d9df81d1 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 16 Jan 2011 11:03:28 -0300 Subject: [media] v4l2-ctrls: fix missing 'read-only' check VIDIOC_S_CTRL did not check against read-only controls. Even worse, for controls of type CTRL_CLASS it would cause a kernel oops since those controls do not have a s_ctrl op. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ctrls.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index 0d1a3d831374..22a9a722f520 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -1824,6 +1824,9 @@ static int set_ctrl(struct v4l2_ctrl *ctrl, s32 *val) int ret; int i; + if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY) + return -EACCES; + v4l2_ctrl_lock(ctrl); /* Reset the 'is_new' flags of the cluster */ -- cgit v1.2.1 From 829fb2dcb5252c5064d12cdaf65d2828420e07b3 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 16 Jan 2011 11:21:40 -0300 Subject: [media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs When queryctrl is called with a V4L2_CID_PRIVATE_BASE control ID, then currently it is replaced by the real internal ID. This is not according to the spec so keep the V4L2_CID_PRIVATE_BASE ID in this case. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ctrls.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index 22a9a722f520..01251431fd2a 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -1344,7 +1344,10 @@ int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc) ctrl = ref->ctrl; memset(qc, 0, sizeof(*qc)); - qc->id = ctrl->id; + if (id >= V4L2_CID_PRIVATE_BASE) + qc->id = id; + else + qc->id = ctrl->id; strlcpy(qc->name, ctrl->name, sizeof(qc->name)); qc->minimum = ctrl->minimum; qc->maximum = ctrl->maximum; -- cgit v1.2.1 From eac9aa005a2e0676d07f1906f9933fd055eb1f0b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 7 Dec 2010 08:57:25 -0300 Subject: [media] v4l: Fix a use-before-set in the control framework v4l2_queryctrl sets the step value based on the control type. That would be fine if it used the control type stored in the V4L2 kernel control object, not the one stored in the userspace ioctl structure that has just been memset to 0. Fix this. Signed-off-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ctrls.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index 01251431fd2a..ef66d2af0c57 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -1352,7 +1352,7 @@ int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc) qc->minimum = ctrl->minimum; qc->maximum = ctrl->maximum; qc->default_value = ctrl->default_value; - if (qc->type == V4L2_CTRL_TYPE_MENU) + if (ctrl->type == V4L2_CTRL_TYPE_MENU) qc->step = 1; else qc->step = ctrl->step; -- cgit v1.2.1 From bd5ba3ba2ead7248124723dac2481d0992e75e91 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 31 Dec 2010 11:27:38 -0300 Subject: [media] w9966: zero device state after a detach After a detach zero the whole device state to ensure a clean slate on the next attach. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/w9966.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c index 019ee206cbee..fa35639d0c15 100644 --- a/drivers/media/video/w9966.c +++ b/drivers/media/video/w9966.c @@ -937,6 +937,7 @@ static void w9966_term(struct w9966 *cam) parport_unregister_device(cam->pdev); w9966_set_state(cam, W9966_STATE_PDEV, 0); } + memset(cam, 0, sizeof(*cam)); } -- cgit v1.2.1 From 6ce3ced4f73e3f0c345f47dc99fd21f2248724a8 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 31 Dec 2010 11:28:51 -0300 Subject: [media] zoran: use video_device_alloc instead of kmalloc Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran_card.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 9cdc3bb15b15..9f2bac519647 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -1041,7 +1041,7 @@ zr36057_init (struct zoran *zr) /* allocate memory *before* doing anything to the hardware * in case allocation fails */ zr->stat_com = kzalloc(BUZ_NUM_STAT_COM * 4, GFP_KERNEL); - zr->video_dev = kmalloc(sizeof(struct video_device), GFP_KERNEL); + zr->video_dev = video_device_alloc(); if (!zr->stat_com || !zr->video_dev) { dprintk(1, KERN_ERR -- cgit v1.2.1 From 46b633779b299c7fb3d78f153a5034055f99cd45 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 31 Dec 2010 11:47:23 -0300 Subject: [media] v4l2-dev: don't memset video_device.dev Zeroing video_device.dev causes a memory leak if video_set_drvdata was called before video_register_device was called. video_set_drvdata calls dev_set_drvdata which allocates video_device.dev.p. memsetting this will prevent freeing of that memory. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-dev.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 359e23290a7e..341764a3a990 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -419,6 +419,10 @@ static int get_index(struct video_device *vdev) * The registration code assigns minor numbers and device node numbers * based on the requested type and registers the new device node with * the kernel. + * + * This function assumes that struct video_device was zeroed when it + * was allocated and does not contain any stale date. + * * An error is returned if no free minor or device node number could be * found, or if the registration of the device node failed. * @@ -440,7 +444,6 @@ static int __video_register_device(struct video_device *vdev, int type, int nr, int minor_offset = 0; int minor_cnt = VIDEO_NUM_DEVICES; const char *name_base; - void *priv = vdev->dev.p; /* A minor value of -1 marks this video device as never having been registered */ @@ -559,10 +562,6 @@ static int __video_register_device(struct video_device *vdev, int type, int nr, } /* Part 4: register the device with sysfs */ - memset(&vdev->dev, 0, sizeof(vdev->dev)); - /* The memset above cleared the device's device_private, so - put back the copy we made earlier. */ - vdev->dev.p = priv; vdev->dev.class = &video_class; vdev->dev.devt = MKDEV(VIDEO_MAJOR, vdev->minor); if (vdev->parent) -- cgit v1.2.1 From 672dcd54774ea1b03da8f2baa1cdbf827927fc85 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 11 Jan 2011 17:48:21 -0300 Subject: [media] v4l2-device: fix 'use-after-freed' oops Fix a bug in v4l2_device_unregister where the sd pointer can be dereferenced after it was freed. Normally the i2c adapter is removed before this function is called. Removing the adapter will also unregister all subdevs on that adapter, so generally v4l2_device_unregister has nothing to do. However, in the case of a platform i2c bus that bus is generally not freed. In that case, after freeing the i2c subdevice the code will fall into the second block when it tests if the subdev is a SPI device. But by that time the subdev is already freed and the kernel oopses. The fix is trivial: continue with the loop after freeing the i2c or spi subdevice. Signed-off-by: Hans Verkuil Reported-by: Daniel Drake Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-device.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c index b24f002ffa67..ce64fe16bc60 100644 --- a/drivers/media/video/v4l2-device.c +++ b/drivers/media/video/v4l2-device.c @@ -100,6 +100,7 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev) is a platform bus, then it is never deleted. */ if (client) i2c_unregister_device(client); + continue; } #endif #if defined(CONFIG_SPI) @@ -108,6 +109,7 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev) if (spi) spi_unregister_device(spi); + continue; } #endif } -- cgit v1.2.1 From 706c57d802394e2fe720ebc929234a678f94e716 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 6 Jan 2011 13:23:13 -0300 Subject: [media] rc/mceusb: timeout should be in ns, not us Fixes an egregious bug in mceusb driver, where the receiver was being put into idle mode far sooner than it should have, thanks to storing a timeout value that in us where it should be ns. Basically, the receiver kept going into idle mode before a trailing space had been fully received, which was causing problems for some protocols, most notably manifesting as lirc userspace never receiving a trailing space for any rc5 signals. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/mceusb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 2d9113493cf0..079353e5d558 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -816,7 +816,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index) switch (ir->buf_in[index]) { /* 2-byte return value commands */ case MCE_CMD_S_TIMEOUT: - ir->rc->timeout = MS_TO_US((hi << 8 | lo) / 2); + ir->rc->timeout = MS_TO_NS((hi << 8 | lo) / 2); break; /* 1-byte return value commands */ @@ -1060,7 +1060,7 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir) rc->priv = ir; rc->driver_type = RC_DRIVER_IR_RAW; rc->allowed_protos = RC_TYPE_ALL; - rc->timeout = MS_TO_US(1000); + rc->timeout = MS_TO_NS(1000); if (!ir->flags.no_tx) { rc->s_tx_mask = mceusb_set_tx_mask; rc->s_tx_carrier = mceusb_set_tx_carrier; -- cgit v1.2.1 From 324b04ba5da7918a2409f8113e46843bfbd89e67 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Fri, 14 Jan 2011 16:25:21 -0300 Subject: [media] hdpvr: enable IR part A number of things going on here, but the end result is that the IR part on the hdpvr gets enabled, and can be used with ir-kbd-i2c and/or lirc_zilog. First up, there are some conditional build fixes that come into play whether i2c is built-in or modular. Second, we're swapping out i2c_new_probed_device() for i2c_new_device(), as in my testing, probing always fails, but we *know* that all hdpvr devices have a z8 chip at 0x70 and 0x71. Third, we're poking at an i2c address directly without a client, and writing some magic bits to actually turn on this IR part (this could use some improvement in the future). Fourth, some of the i2c_adapter storage has been reworked, as the existing implementation used to lead to an oops following i2c changes c. 2.6.31. Earlier editions of this patch have been floating around the 'net for a while, including being patched into Fedora kernels, and they *do* work. This specific version isn't yet tested, beyond loading ir-kbd-i2c and confirming that it does bind to the RX address of the hdpvr. [mchehab@redhat.com: I2C_CLASS_TV_ANALOG is not defined. Fix compilation bug] Signed-off-by: Jarod Wilson Acked-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/hdpvr/Makefile | 4 +- drivers/media/video/hdpvr/hdpvr-core.c | 10 ++- drivers/media/video/hdpvr/hdpvr-i2c.c | 119 +++++++++++++++----------------- drivers/media/video/hdpvr/hdpvr-video.c | 7 +- drivers/media/video/hdpvr/hdpvr.h | 2 +- 5 files changed, 65 insertions(+), 77 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/hdpvr/Makefile b/drivers/media/video/hdpvr/Makefile index e0230fcb2e36..3baa9f613ca3 100644 --- a/drivers/media/video/hdpvr/Makefile +++ b/drivers/media/video/hdpvr/Makefile @@ -1,6 +1,4 @@ -hdpvr-objs := hdpvr-control.o hdpvr-core.o hdpvr-video.o - -hdpvr-$(CONFIG_I2C) += hdpvr-i2c.o +hdpvr-objs := hdpvr-control.o hdpvr-core.o hdpvr-video.o hdpvr-i2c.o obj-$(CONFIG_VIDEO_HDPVR) += hdpvr.o diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c index f7d1ee55185a..a6572e5ae369 100644 --- a/drivers/media/video/hdpvr/hdpvr-core.c +++ b/drivers/media/video/hdpvr/hdpvr-core.c @@ -378,19 +378,17 @@ static int hdpvr_probe(struct usb_interface *interface, goto error; } -#ifdef CONFIG_I2C - /* until i2c is working properly */ - retval = 0; /* hdpvr_register_i2c_adapter(dev); */ +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + retval = hdpvr_register_i2c_adapter(dev); if (retval < 0) { v4l2_err(&dev->v4l2_dev, "registering i2c adapter failed\n"); goto error; } - /* until i2c is working properly */ - retval = 0; /* hdpvr_register_i2c_ir(dev); */ + retval = hdpvr_register_i2c_ir(dev); if (retval < 0) v4l2_err(&dev->v4l2_dev, "registering i2c IR devices failed\n"); -#endif /* CONFIG_I2C */ +#endif /* let the user know what node this device is now attached to */ v4l2_info(&dev->v4l2_dev, "device now attached to %s\n", diff --git a/drivers/media/video/hdpvr/hdpvr-i2c.c b/drivers/media/video/hdpvr/hdpvr-i2c.c index 24966aa02a70..45b88cf60d68 100644 --- a/drivers/media/video/hdpvr/hdpvr-i2c.c +++ b/drivers/media/video/hdpvr/hdpvr-i2c.c @@ -13,6 +13,8 @@ * */ +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + #include #include @@ -28,55 +30,31 @@ #define Z8F0811_IR_TX_I2C_ADDR 0x70 #define Z8F0811_IR_RX_I2C_ADDR 0x71 -static const u8 ir_i2c_addrs[] = { - Z8F0811_IR_TX_I2C_ADDR, - Z8F0811_IR_RX_I2C_ADDR, -}; -static const char * const ir_devicenames[] = { - "ir_tx_z8f0811_hdpvr", - "ir_rx_z8f0811_hdpvr", +static struct i2c_board_info hdpvr_i2c_board_info = { + I2C_BOARD_INFO("ir_tx_z8f0811_hdpvr", Z8F0811_IR_TX_I2C_ADDR), + I2C_BOARD_INFO("ir_rx_z8f0811_hdpvr", Z8F0811_IR_RX_I2C_ADDR), }; -static int hdpvr_new_i2c_ir(struct hdpvr_device *dev, struct i2c_adapter *adap, - const char *type, u8 addr) +int hdpvr_register_i2c_ir(struct hdpvr_device *dev) { - struct i2c_board_info info; + struct i2c_client *c; struct IR_i2c_init_data *init_data = &dev->ir_i2c_init_data; - unsigned short addr_list[2] = { addr, I2C_CLIENT_END }; - - memset(&info, 0, sizeof(struct i2c_board_info)); - strlcpy(info.type, type, I2C_NAME_SIZE); /* Our default information for ir-kbd-i2c.c to use */ - switch (addr) { - case Z8F0811_IR_RX_I2C_ADDR: - init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW; - init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; - init_data->type = RC_TYPE_RC5; - init_data->name = "HD PVR"; - info.platform_data = init_data; - break; - } - - return i2c_new_probed_device(adap, &info, addr_list, NULL) == NULL ? - -1 : 0; -} + init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW; + init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; + init_data->type = RC_TYPE_RC5; + init_data->name = "HD PVR"; + hdpvr_i2c_board_info.platform_data = init_data; -int hdpvr_register_i2c_ir(struct hdpvr_device *dev) -{ - int i; - int ret = 0; + c = i2c_new_device(&dev->i2c_adapter, &hdpvr_i2c_board_info); - for (i = 0; i < ARRAY_SIZE(ir_i2c_addrs); i++) - ret += hdpvr_new_i2c_ir(dev, dev->i2c_adapter, - ir_devicenames[i], ir_i2c_addrs[i]); - - return ret; + return (c == NULL) ? -ENODEV : 0; } -static int hdpvr_i2c_read(struct hdpvr_device *dev, unsigned char addr, - char *data, int len) +static int hdpvr_i2c_read(struct hdpvr_device *dev, int bus, + unsigned char addr, char *data, int len) { int ret; char *buf = kmalloc(len, GFP_KERNEL); @@ -86,7 +64,7 @@ static int hdpvr_i2c_read(struct hdpvr_device *dev, unsigned char addr, ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), REQTYPE_I2C_READ, CTRL_READ_REQUEST, - 0x100|addr, 0, buf, len, 1000); + (bus << 8) | addr, 0, buf, len, 1000); if (ret == len) { memcpy(data, buf, len); @@ -99,8 +77,8 @@ static int hdpvr_i2c_read(struct hdpvr_device *dev, unsigned char addr, return ret; } -static int hdpvr_i2c_write(struct hdpvr_device *dev, unsigned char addr, - char *data, int len) +static int hdpvr_i2c_write(struct hdpvr_device *dev, int bus, + unsigned char addr, char *data, int len) { int ret; char *buf = kmalloc(len, GFP_KERNEL); @@ -111,7 +89,7 @@ static int hdpvr_i2c_write(struct hdpvr_device *dev, unsigned char addr, ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), REQTYPE_I2C_WRITE, CTRL_WRITE_REQUEST, - 0x100|addr, 0, buf, len, 1000); + (bus << 8) | addr, 0, buf, len, 1000); if (ret < 0) goto error; @@ -121,7 +99,7 @@ static int hdpvr_i2c_write(struct hdpvr_device *dev, unsigned char addr, REQTYPE_I2C_WRITE_STATT, CTRL_READ_REQUEST, 0, 0, buf, 2, 1000); - if (ret == 2) + if ((ret == 2) && (buf[1] == (len - 1))) ret = 0; else if (ret >= 0) ret = -EIO; @@ -146,10 +124,10 @@ static int hdpvr_transfer(struct i2c_adapter *i2c_adapter, struct i2c_msg *msgs, addr = msgs[i].addr << 1; if (msgs[i].flags & I2C_M_RD) - retval = hdpvr_i2c_read(dev, addr, msgs[i].buf, + retval = hdpvr_i2c_read(dev, 1, addr, msgs[i].buf, msgs[i].len); else - retval = hdpvr_i2c_write(dev, addr, msgs[i].buf, + retval = hdpvr_i2c_write(dev, 1, addr, msgs[i].buf, msgs[i].len); } @@ -168,30 +146,47 @@ static struct i2c_algorithm hdpvr_algo = { .functionality = hdpvr_functionality, }; +static struct i2c_adapter hdpvr_i2c_adapter_template = { + .name = "Hauppage HD PVR I2C", + .owner = THIS_MODULE, + .algo = &hdpvr_algo, +}; + +static int hdpvr_activate_ir(struct hdpvr_device *dev) +{ + char buffer[8]; + + mutex_lock(&dev->i2c_mutex); + + hdpvr_i2c_read(dev, 0, 0x54, buffer, 1); + + buffer[0] = 0; + buffer[1] = 0x8; + hdpvr_i2c_write(dev, 1, 0x54, buffer, 2); + + buffer[1] = 0x18; + hdpvr_i2c_write(dev, 1, 0x54, buffer, 2); + + mutex_unlock(&dev->i2c_mutex); + + return 0; +} + int hdpvr_register_i2c_adapter(struct hdpvr_device *dev) { - struct i2c_adapter *i2c_adap; int retval = -ENOMEM; - i2c_adap = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); - if (i2c_adap == NULL) - goto error; + hdpvr_activate_ir(dev); - strlcpy(i2c_adap->name, "Hauppauge HD PVR I2C", - sizeof(i2c_adap->name)); - i2c_adap->algo = &hdpvr_algo; - i2c_adap->owner = THIS_MODULE; - i2c_adap->dev.parent = &dev->udev->dev; + memcpy(&dev->i2c_adapter, &hdpvr_i2c_adapter_template, + sizeof(struct i2c_adapter)); + dev->i2c_adapter.dev.parent = &dev->udev->dev; - i2c_set_adapdata(i2c_adap, dev); + i2c_set_adapdata(&dev->i2c_adapter, dev); - retval = i2c_add_adapter(i2c_adap); + retval = i2c_add_adapter(&dev->i2c_adapter); - if (!retval) - dev->i2c_adapter = i2c_adap; - else - kfree(i2c_adap); - -error: return retval; } + +#endif diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c index d38fe1043e47..514aea76eaa5 100644 --- a/drivers/media/video/hdpvr/hdpvr-video.c +++ b/drivers/media/video/hdpvr/hdpvr-video.c @@ -1220,12 +1220,9 @@ static void hdpvr_device_release(struct video_device *vdev) v4l2_device_unregister(&dev->v4l2_dev); /* deregister I2C adapter */ -#ifdef CONFIG_I2C +#if defined(CONFIG_I2C) || (CONFIG_I2C_MODULE) mutex_lock(&dev->i2c_mutex); - if (dev->i2c_adapter) - i2c_del_adapter(dev->i2c_adapter); - kfree(dev->i2c_adapter); - dev->i2c_adapter = NULL; + i2c_del_adapter(&dev->i2c_adapter); mutex_unlock(&dev->i2c_mutex); #endif /* CONFIG_I2C */ diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/video/hdpvr/hdpvr.h index 37f1e4c7675d..29f74269400c 100644 --- a/drivers/media/video/hdpvr/hdpvr.h +++ b/drivers/media/video/hdpvr/hdpvr.h @@ -106,7 +106,7 @@ struct hdpvr_device { struct work_struct worker; /* I2C adapter */ - struct i2c_adapter *i2c_adapter; + struct i2c_adapter i2c_adapter; /* I2C lock */ struct mutex i2c_mutex; -- cgit v1.2.1 From 559d162e1ebcdb61e89f154f2c2db376af072b0e Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Fri, 14 Jan 2011 16:40:32 -0300 Subject: [media] hdpvr: reduce latency of i2c read/write w/recycled buffer The current hdpvr code kmalloc's a new buffer for every i2c read and write. Rather than do that, lets allocate a buffer in the driver's device struct and just use that every time. The size I've chosen for the buffer is the maximum size I could ascertain might be used by either ir-kbd-i2c or lirc_zilog, plus a bit of padding (lirc_zilog may use up to 100 bytes on tx, rounded that up to 128). Note that this might also remedy user reports of very sluggish behavior of IR receive with hdpvr hardware. v2: make sure (len <= (dev->i2c_buf)) [Jean Delvare] Reported-by: Jean Delvare Acked-by: Jean Delvare Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/hdpvr/hdpvr-i2c.c | 30 +++++++++++++----------------- drivers/media/video/hdpvr/hdpvr.h | 3 +++ 2 files changed, 16 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/hdpvr/hdpvr-i2c.c b/drivers/media/video/hdpvr/hdpvr-i2c.c index 45b88cf60d68..89b71faeaac2 100644 --- a/drivers/media/video/hdpvr/hdpvr-i2c.c +++ b/drivers/media/video/hdpvr/hdpvr-i2c.c @@ -57,23 +57,21 @@ static int hdpvr_i2c_read(struct hdpvr_device *dev, int bus, unsigned char addr, char *data, int len) { int ret; - char *buf = kmalloc(len, GFP_KERNEL); - if (!buf) - return -ENOMEM; + + if (len > sizeof(dev->i2c_buf)) + return -EINVAL; ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), REQTYPE_I2C_READ, CTRL_READ_REQUEST, - (bus << 8) | addr, 0, buf, len, 1000); + (bus << 8) | addr, 0, &dev->i2c_buf, len, 1000); if (ret == len) { - memcpy(data, buf, len); + memcpy(data, &dev->i2c_buf, len); ret = 0; } else if (ret >= 0) ret = -EIO; - kfree(buf); - return ret; } @@ -81,31 +79,29 @@ static int hdpvr_i2c_write(struct hdpvr_device *dev, int bus, unsigned char addr, char *data, int len) { int ret; - char *buf = kmalloc(len, GFP_KERNEL); - if (!buf) - return -ENOMEM; - memcpy(buf, data, len); + if (len > sizeof(dev->i2c_buf)) + return -EINVAL; + + memcpy(&dev->i2c_buf, data, len); ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), REQTYPE_I2C_WRITE, CTRL_WRITE_REQUEST, - (bus << 8) | addr, 0, buf, len, 1000); + (bus << 8) | addr, 0, &dev->i2c_buf, len, 1000); if (ret < 0) - goto error; + return ret; ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), REQTYPE_I2C_WRITE_STATT, CTRL_READ_REQUEST, - 0, 0, buf, 2, 1000); + 0, 0, &dev->i2c_buf, 2, 1000); - if ((ret == 2) && (buf[1] == (len - 1))) + if ((ret == 2) && (dev->i2c_buf[1] == (len - 1))) ret = 0; else if (ret >= 0) ret = -EIO; -error: - kfree(buf); return ret; } diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/video/hdpvr/hdpvr.h index 29f74269400c..ee74e3be9a6a 100644 --- a/drivers/media/video/hdpvr/hdpvr.h +++ b/drivers/media/video/hdpvr/hdpvr.h @@ -25,6 +25,7 @@ KERNEL_VERSION(HDPVR_MAJOR_VERSION, HDPVR_MINOR_VERSION, HDPVR_RELEASE) #define HDPVR_MAX 8 +#define HDPVR_I2C_MAX_SIZE 128 /* Define these values to match your devices */ #define HD_PVR_VENDOR_ID 0x2040 @@ -109,6 +110,8 @@ struct hdpvr_device { struct i2c_adapter i2c_adapter; /* I2C lock */ struct mutex i2c_mutex; + /* I2C message buffer space */ + char i2c_buf[HDPVR_I2C_MAX_SIZE]; /* For passing data to ir-kbd-i2c */ struct IR_i2c_init_data ir_i2c_init_data; -- cgit v1.2.1 From 88914bdf8c677ebd7e797adac05e47303fd6ac77 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Mon, 17 Jan 2011 16:02:00 -0300 Subject: [media] staging/lirc: fix mem leaks and ptr err usage When the lirc drivers were converted over to using memdup_user, I mistakenly also removed corresponding calls to kfree. Add those back. I also screwed up on the allocation error check in lirc_serial, using if (PTR_ERR()) instead of if (IS_ERR()), which broke transmit. Reported-by: Jiri Fojtasek Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_imon.c | 1 + drivers/staging/lirc/lirc_it87.c | 1 + drivers/staging/lirc/lirc_parallel.c | 19 ++++++++++++++----- drivers/staging/lirc/lirc_sasem.c | 1 + drivers/staging/lirc/lirc_serial.c | 3 ++- drivers/staging/lirc/lirc_sir.c | 1 + 6 files changed, 20 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/lirc/lirc_imon.c b/drivers/staging/lirc/lirc_imon.c index 0da6b9518af9..235cab0eb087 100644 --- a/drivers/staging/lirc/lirc_imon.c +++ b/drivers/staging/lirc/lirc_imon.c @@ -447,6 +447,7 @@ static ssize_t vfd_write(struct file *file, const char *buf, exit: mutex_unlock(&context->ctx_lock); + kfree(data_buf); return (!retval) ? n_bytes : retval; } diff --git a/drivers/staging/lirc/lirc_it87.c b/drivers/staging/lirc/lirc_it87.c index 929ae5795467..5938616f3e8f 100644 --- a/drivers/staging/lirc/lirc_it87.c +++ b/drivers/staging/lirc/lirc_it87.c @@ -232,6 +232,7 @@ static ssize_t lirc_write(struct file *file, const char *buf, i++; } terminate_send(tx_buf[i - 1]); + kfree(tx_buf); return n; } diff --git a/drivers/staging/lirc/lirc_parallel.c b/drivers/staging/lirc/lirc_parallel.c index dfd2c447e67d..3a9c09881b2b 100644 --- a/drivers/staging/lirc/lirc_parallel.c +++ b/drivers/staging/lirc/lirc_parallel.c @@ -376,6 +376,7 @@ static ssize_t lirc_write(struct file *filep, const char *buf, size_t n, unsigned long flags; int counttimer; int *wbuf; + ssize_t ret; if (!is_claimed) return -EBUSY; @@ -393,8 +394,10 @@ static ssize_t lirc_write(struct file *filep, const char *buf, size_t n, if (timer == 0) { /* try again if device is ready */ timer = init_lirc_timer(); - if (timer == 0) - return -EIO; + if (timer == 0) { + ret = -EIO; + goto out; + } } /* adjust values from usecs */ @@ -420,7 +423,8 @@ static ssize_t lirc_write(struct file *filep, const char *buf, size_t n, if (check_pselecd && (in(1) & LP_PSELECD)) { lirc_off(); local_irq_restore(flags); - return -EIO; + ret = -EIO; + goto out; } } while (counttimer < wbuf[i]); i++; @@ -436,7 +440,8 @@ static ssize_t lirc_write(struct file *filep, const char *buf, size_t n, level = newlevel; if (check_pselecd && (in(1) & LP_PSELECD)) { local_irq_restore(flags); - return -EIO; + ret = -EIO; + goto out; } } while (counttimer < wbuf[i]); i++; @@ -445,7 +450,11 @@ static ssize_t lirc_write(struct file *filep, const char *buf, size_t n, #else /* place code that handles write without external timer here */ #endif - return n; + ret = n; +out: + kfree(wbuf); + + return ret; } static unsigned int lirc_poll(struct file *file, poll_table *wait) diff --git a/drivers/staging/lirc/lirc_sasem.c b/drivers/staging/lirc/lirc_sasem.c index 998485ebdbce..925eabe14854 100644 --- a/drivers/staging/lirc/lirc_sasem.c +++ b/drivers/staging/lirc/lirc_sasem.c @@ -448,6 +448,7 @@ static ssize_t vfd_write(struct file *file, const char *buf, exit: mutex_unlock(&context->ctx_lock); + kfree(data_buf); return (!retval) ? n_bytes : retval; } diff --git a/drivers/staging/lirc/lirc_serial.c b/drivers/staging/lirc/lirc_serial.c index 9bcf149c4260..1c3099b388e0 100644 --- a/drivers/staging/lirc/lirc_serial.c +++ b/drivers/staging/lirc/lirc_serial.c @@ -966,7 +966,7 @@ static ssize_t lirc_write(struct file *file, const char *buf, if (n % sizeof(int) || count % 2 == 0) return -EINVAL; wbuf = memdup_user(buf, n); - if (PTR_ERR(wbuf)) + if (IS_ERR(wbuf)) return PTR_ERR(wbuf); spin_lock_irqsave(&hardware[type].lock, flags); if (type == LIRC_IRDEO) { @@ -981,6 +981,7 @@ static ssize_t lirc_write(struct file *file, const char *buf, } off(); spin_unlock_irqrestore(&hardware[type].lock, flags); + kfree(wbuf); return n; } diff --git a/drivers/staging/lirc/lirc_sir.c b/drivers/staging/lirc/lirc_sir.c index c553ab626238..76be7b8c6209 100644 --- a/drivers/staging/lirc/lirc_sir.c +++ b/drivers/staging/lirc/lirc_sir.c @@ -330,6 +330,7 @@ static ssize_t lirc_write(struct file *file, const char *buf, size_t n, /* enable receiver */ Ser2UTCR3 = UTCR3_RXE|UTCR3_RIE; #endif + kfree(tx_buf); return count; } -- cgit v1.2.1 From 04de96c9c6981c5957aa5db39bbdc4d958d07efa Mon Sep 17 00:00:00 2001 From: Tracey Dent Date: Wed, 19 Jan 2011 08:25:02 -0700 Subject: drivers/block/Makefile: replace the use of -objs with -y Change Makefile to use -y instead of -objs because -objs is deprecated and should now be switched. According to (documentation/kbuild/makefiles.txt). Signed-off-by: Tracey Dent Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/Makefile b/drivers/block/Makefile index d7f463d6312d..40528ba56d1b 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -39,4 +39,4 @@ obj-$(CONFIG_XEN_BLKDEV_FRONTEND) += xen-blkfront.o obj-$(CONFIG_BLK_DEV_DRBD) += drbd/ obj-$(CONFIG_BLK_DEV_RBD) += rbd.o -swim_mod-objs := swim.o swim_asm.o +swim_mod-y := swim.o swim_asm.o -- cgit v1.2.1 From ee71a968672a9951aee6014c55511007596425bc Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Wed, 19 Jan 2011 08:25:02 -0700 Subject: loop: queue_lock NULL pointer derefence in blk_throtl_exit Performing $ sudo mount -o loop -o umask=0 /dev/sdb1 /mnt/ mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so $ sudo modprobe -r loop results in oops: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [] do_raw_spin_lock+0x14/0x122 Process modprobe (pid: 6189, threadinfo ffff88009a898000, task ffff880154a88000) Call Trace: [] _raw_spin_lock_irq+0x4a/0x51 [] ? blk_throtl_exit+0x3b/0xa0 [] ? cancel_delayed_work_sync+0xd/0xf [] blk_throtl_exit+0x3b/0xa0 [] blk_release_queue+0x21/0x65 [] kobject_release+0x51/0x66 [] ? kobject_release+0x0/0x66 [] kref_put+0x43/0x4d [] kobject_put+0x47/0x4b [] blk_cleanup_queue+0x56/0x5b [] loop_exit+0x68/0x844 [loop] [] sys_delete_module+0x1e8/0x25b [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] system_call_fastpath+0x16/0x1b because of an attempt to acquire NULL queue_lock. I added the same lines as in blk_queue_make_request - index 44e18c0..49e6a54 100644`fall back to embedded per-queue lock'. Signed-off-by: Sergey Senozhatsky Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/loop.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 44e18c073c44..49e6a545eb63 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -1641,6 +1641,9 @@ out: static void loop_free(struct loop_device *lo) { + if (!lo->lo_queue->queue_lock) + lo->lo_queue->queue_lock = &lo->lo_queue->__queue_lock; + blk_cleanup_queue(lo->lo_queue); put_disk(lo->lo_disk); list_del(&lo->lo_list); -- cgit v1.2.1 From a0700bdd0b0150ea445159b1dee587f1507c272f Mon Sep 17 00:00:00 2001 From: Tracey Dent Date: Wed, 19 Jan 2011 08:25:02 -0700 Subject: drivers/block/aoe/Makefile: replace the use of -objs with -y Change Makefile to use -y instead of -objs because -objs is deprecated and should now be switched. According to (documentation/kbuild/makefiles.txt). Signed-off-by: Tracey Dent Cc: "Ed L. Cashin" Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/aoe/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/aoe/Makefile b/drivers/block/aoe/Makefile index e76d997183c6..06ea82cdf27d 100644 --- a/drivers/block/aoe/Makefile +++ b/drivers/block/aoe/Makefile @@ -3,4 +3,4 @@ # obj-$(CONFIG_ATA_OVER_ETH) += aoe.o -aoe-objs := aoeblk.o aoechr.o aoecmd.o aoedev.o aoemain.o aoenet.o +aoe-y := aoeblk.o aoechr.o aoecmd.o aoedev.o aoemain.o aoenet.o -- cgit v1.2.1 From 68264e9d6781f7163e92c517769bb470fa43f6cd Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Wed, 19 Jan 2011 08:25:02 -0700 Subject: cciss: make cciss_revalidate not loop through CISS_MAX_LUNS volumes unnecessarily. Signed-off-by: Stephen M. Cameron Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 516d5bbec2b6..9279272b3732 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -2833,7 +2833,7 @@ static int cciss_revalidate(struct gendisk *disk) sector_t total_size; InquiryData_struct *inq_buff = NULL; - for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) { + for (logvol = 0; logvol <= h->highest_lun; logvol++) { if (!h->drv[logvol]) continue; if (memcmp(h->drv[logvol]->LunID, drv->LunID, -- cgit v1.2.1 From 86e09287e4f8c81831b4d4118a48597565f0d21b Mon Sep 17 00:00:00 2001 From: Alexander Holler Date: Mon, 22 Nov 2010 21:09:01 +0100 Subject: Bluetooth: ath3k: reduce memory usage There is no need to hold the firmware in memory. Signed-off-by: Alexander Holler Signed-off-by: Gustavo F. Padovan --- drivers/bluetooth/ath3k.c | 75 +++++++++++++---------------------------------- 1 file changed, 20 insertions(+), 55 deletions(-) (limited to 'drivers') diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 949ed09c6361..a126e614601f 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -47,46 +47,40 @@ MODULE_DEVICE_TABLE(usb, ath3k_table); #define USB_REQ_DFU_DNLOAD 1 #define BULK_SIZE 4096 -struct ath3k_data { - struct usb_device *udev; - u8 *fw_data; - u32 fw_size; - u32 fw_sent; -}; - -static int ath3k_load_firmware(struct ath3k_data *data, - unsigned char *firmware, - int count) +static int ath3k_load_firmware(struct usb_device *udev, + const struct firmware *firmware) { u8 *send_buf; int err, pipe, len, size, sent = 0; + int count = firmware->size; - BT_DBG("ath3k %p udev %p", data, data->udev); + BT_DBG("udev %p", udev); - pipe = usb_sndctrlpipe(data->udev, 0); + pipe = usb_sndctrlpipe(udev, 0); - if ((usb_control_msg(data->udev, pipe, + send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC); + if (!send_buf) { + BT_ERR("Can't allocate memory chunk for firmware"); + return -ENOMEM; + } + + memcpy(send_buf, firmware->data, 20); + if ((err = usb_control_msg(udev, pipe, USB_REQ_DFU_DNLOAD, USB_TYPE_VENDOR, 0, 0, - firmware, 20, USB_CTRL_SET_TIMEOUT)) < 0) { + send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) { BT_ERR("Can't change to loading configuration err"); - return -EBUSY; + goto error; } sent += 20; count -= 20; - send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC); - if (!send_buf) { - BT_ERR("Can't allocate memory chunk for firmware"); - return -ENOMEM; - } - while (count) { size = min_t(uint, count, BULK_SIZE); - pipe = usb_sndbulkpipe(data->udev, 0x02); - memcpy(send_buf, firmware + sent, size); + pipe = usb_sndbulkpipe(udev, 0x02); + memcpy(send_buf, firmware->data + sent, size); - err = usb_bulk_msg(data->udev, pipe, send_buf, size, + err = usb_bulk_msg(udev, pipe, send_buf, size, &len, 3000); if (err || (len != size)) { @@ -112,57 +106,28 @@ static int ath3k_probe(struct usb_interface *intf, { const struct firmware *firmware; struct usb_device *udev = interface_to_usbdev(intf); - struct ath3k_data *data; - int size; BT_DBG("intf %p id %p", intf, id); if (intf->cur_altsetting->desc.bInterfaceNumber != 0) return -ENODEV; - data = kzalloc(sizeof(*data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->udev = udev; - if (request_firmware(&firmware, "ath3k-1.fw", &udev->dev) < 0) { - kfree(data); return -EIO; } - size = max_t(uint, firmware->size, 4096); - data->fw_data = kmalloc(size, GFP_KERNEL); - if (!data->fw_data) { + if (ath3k_load_firmware(udev, firmware)) { release_firmware(firmware); - kfree(data); - return -ENOMEM; - } - - memcpy(data->fw_data, firmware->data, firmware->size); - data->fw_size = firmware->size; - data->fw_sent = 0; - release_firmware(firmware); - - usb_set_intfdata(intf, data); - if (ath3k_load_firmware(data, data->fw_data, data->fw_size)) { - usb_set_intfdata(intf, NULL); - kfree(data->fw_data); - kfree(data); return -EIO; } + release_firmware(firmware); return 0; } static void ath3k_disconnect(struct usb_interface *intf) { - struct ath3k_data *data = usb_get_intfdata(intf); - BT_DBG("ath3k_disconnect intf %p", intf); - - kfree(data->fw_data); - kfree(data); } static struct usb_driver ath3k_driver = { -- cgit v1.2.1 From c9f2954964df1490373065558f3156379c7a2454 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Tue, 30 Nov 2010 13:07:21 -0600 Subject: lguest: Use this_cpu_ops Use this_cpu_ops in a couple of places in lguest. Signed-off-by: Christoph Lameter Signed-off-by: Rusty Russell --- drivers/lguest/page_tables.c | 2 +- drivers/lguest/x86/core.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c index 04b22128a474..d21578ee95de 100644 --- a/drivers/lguest/page_tables.c +++ b/drivers/lguest/page_tables.c @@ -1137,7 +1137,7 @@ void free_guest_pagetable(struct lguest *lg) */ void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages) { - pte_t *switcher_pte_page = __get_cpu_var(switcher_pte_pages); + pte_t *switcher_pte_page = __this_cpu_read(switcher_pte_pages); pte_t regs_pte; #ifdef CONFIG_X86_PAE diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c index b4eb675a807e..bd4b5910473b 100644 --- a/drivers/lguest/x86/core.c +++ b/drivers/lguest/x86/core.c @@ -90,8 +90,8 @@ static void copy_in_guest_info(struct lg_cpu *cpu, struct lguest_pages *pages) * meanwhile). If that's not the case, we pretend everything in the * Guest has changed. */ - if (__get_cpu_var(lg_last_cpu) != cpu || cpu->last_pages != pages) { - __get_cpu_var(lg_last_cpu) = cpu; + if (__this_cpu_read(lg_last_cpu) != cpu || cpu->last_pages != pages) { + __this_cpu_read(lg_last_cpu) = cpu; cpu->last_pages = pages; cpu->changed = CHANGED_ALL; } -- cgit v1.2.1 From ced05dd741779986861fe7369fe002f542d6fa34 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 20 Jan 2011 21:37:29 -0600 Subject: lguest: compile fixes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit arch/x86/lguest/boot.c: In function ‘lguest_init_IRQ’: arch/x86/lguest/boot.c:824: error: macro "__this_cpu_write" requires 2 arguments, but only 1 given arch/x86/lguest/boot.c:824: error: ‘__this_cpu_write’ undeclared (first use in this function) arch/x86/lguest/boot.c:824: error: (Each undeclared identifier is reported only once arch/x86/lguest/boot.c:824: error: for each function it appears in.) drivers/lguest/x86/core.c: In function ‘copy_in_guest_info’: drivers/lguest/x86/core.c:94: error: lvalue required as left operand of assignment Signed-off-by: Rusty Russell --- drivers/lguest/x86/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c index bd4b5910473b..9f1659c3d1f3 100644 --- a/drivers/lguest/x86/core.c +++ b/drivers/lguest/x86/core.c @@ -91,7 +91,7 @@ static void copy_in_guest_info(struct lg_cpu *cpu, struct lguest_pages *pages) * Guest has changed. */ if (__this_cpu_read(lg_last_cpu) != cpu || cpu->last_pages != pages) { - __this_cpu_read(lg_last_cpu) = cpu; + __this_cpu_write(lg_last_cpu, cpu); cpu->last_pages = pages; cpu->changed = CHANGED_ALL; } -- cgit v1.2.1 From 8b3bb3ecf1934ac4a7005ad9017de1127e2fbd2f Mon Sep 17 00:00:00 2001 From: Milton Miller Date: Fri, 7 Jan 2011 02:55:06 -0600 Subject: virtio: remove virtio-pci root device We sometimes need to map between the virtio device and the given pci device. One such use is OS installer that gets the boot pci device from BIOS and needs to find the relevant block device. Since it can't, installation fails. Instead of creating a top-level devices/virtio-pci directory, create each device under the corresponding pci device node. Symlinks to all virtio-pci devices can be found under the pci driver link in bus/pci/drivers/virtio-pci/devices, and all virtio devices under drivers/bus/virtio/devices. Signed-off-by: Milton Miller Signed-off-by: Rusty Russell Acked-by: Michael S. Tsirkin Tested-by: Michael S. Tsirkin Acked-by: Gleb Natapov Tested-by: "Daniel P. Berrange" Cc: stable@kernel.org --- drivers/virtio/virtio_pci.c | 20 ++------------------ 1 file changed, 2 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index ef8d9d558fc7..4fb5b2bf2348 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -96,11 +96,6 @@ static struct pci_device_id virtio_pci_id_table[] = { MODULE_DEVICE_TABLE(pci, virtio_pci_id_table); -/* A PCI device has it's own struct device and so does a virtio device so - * we create a place for the virtio devices to show up in sysfs. I think it - * would make more sense for virtio to not insist on having it's own device. */ -static struct device *virtio_pci_root; - /* Convert a generic virtio device to our structure */ static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev) { @@ -629,7 +624,7 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev, if (vp_dev == NULL) return -ENOMEM; - vp_dev->vdev.dev.parent = virtio_pci_root; + vp_dev->vdev.dev.parent = &pci_dev->dev; vp_dev->vdev.dev.release = virtio_pci_release_dev; vp_dev->vdev.config = &virtio_pci_config_ops; vp_dev->pci_dev = pci_dev; @@ -717,17 +712,7 @@ static struct pci_driver virtio_pci_driver = { static int __init virtio_pci_init(void) { - int err; - - virtio_pci_root = root_device_register("virtio-pci"); - if (IS_ERR(virtio_pci_root)) - return PTR_ERR(virtio_pci_root); - - err = pci_register_driver(&virtio_pci_driver); - if (err) - root_device_unregister(virtio_pci_root); - - return err; + return pci_register_driver(&virtio_pci_driver); } module_init(virtio_pci_init); @@ -735,7 +720,6 @@ module_init(virtio_pci_init); static void __exit virtio_pci_exit(void) { pci_unregister_driver(&virtio_pci_driver); - root_device_unregister(virtio_pci_root); } module_exit(virtio_pci_exit); -- cgit v1.2.1 From e8616b6ced6137085e6657cc63bc2fe3900b8616 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 20 Jan 2011 09:57:11 +0000 Subject: drm/i915: Initialise ring vfuncs for old DRI paths We weren't setting up the vfunc table when initialising the old DRI ringbuffer, leading to such OOPSes as: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 10c441067 PUD 1185e5067 PMD 0 Oops: 0010 [#1] PREEMPT SMP last sysfs file: /sys/class/dmi/id/chassis_asset_tag CPU 3 Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6 nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device processor parport_pc thermal snd thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801 rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod ata_piix libata scsi_mod unix Jan 18 15:49:29 lithui kernel: Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product Name RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0018:ffff8801150d1d40 EFLAGS: 00010202 RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704 RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800 RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444 R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800 R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8 FS: 00007f1038d456e0(0000) GS:ffff880001780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task ffff88011b016e40) Stack: ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000 <0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008 <0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8 Call Trace: [] ? intel_ring_advance+0x16/0x20 [i915] [] i915_irq_emit+0x15b/0x240 [i915] [] drm_ioctl+0x1f1/0x460 [drm] [] ? i915_irq_emit+0x0/0x240 [i915] [] ? do_sync_read+0xd1/0x120 [] ? do_page_fault+0x1df/0x3d0 [] do_vfs_ioctl+0x97/0x550 [] ? security_file_permission+0x7a/0x90 [] sys_ioctl+0x99/0xa0 [] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [<(null)>] (null) RSP CR2: 0000000000000000 Reported-by: Herbert Xu Tested-by: Herbert Xu Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172 Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/i915_dma.c | 25 ++++++-------------- drivers/gpu/drm/i915/intel_ringbuffer.c | 42 +++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_ringbuffer.h | 3 +++ 3 files changed, 52 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 844f3c972b04..665898124200 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -152,7 +152,7 @@ static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv; - struct intel_ring_buffer *ring = LP_RING(dev_priv); + int ret; master_priv->sarea = drm_getsarea(dev); if (master_priv->sarea) { @@ -163,33 +163,22 @@ static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init) } if (init->ring_size != 0) { - if (ring->obj != NULL) { + if (LP_RING(dev_priv)->obj != NULL) { i915_dma_cleanup(dev); DRM_ERROR("Client tried to initialize ringbuffer in " "GEM mode\n"); return -EINVAL; } - ring->size = init->ring_size; - - ring->map.offset = init->ring_start; - ring->map.size = init->ring_size; - ring->map.type = 0; - ring->map.flags = 0; - ring->map.mtrr = 0; - - drm_core_ioremap_wc(&ring->map, dev); - - if (ring->map.handle == NULL) { + ret = intel_render_ring_init_dri(dev, + init->ring_start, + init->ring_size); + if (ret) { i915_dma_cleanup(dev); - DRM_ERROR("can not ioremap virtual address for" - " ring buffer\n"); - return -ENOMEM; + return ret; } } - ring->virtual_start = ring->map.handle; - dev_priv->cpp = init->cpp; dev_priv->back_offset = init->back_offset; dev_priv->front_offset = init->front_offset; diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 03e337072517..51fbc5e33c55 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1291,6 +1291,48 @@ int intel_init_render_ring_buffer(struct drm_device *dev) return intel_init_ring_buffer(dev, ring); } +int intel_render_ring_init_dri(struct drm_device *dev, u64 start, u32 size) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct intel_ring_buffer *ring = &dev_priv->ring[RCS]; + + *ring = render_ring; + if (INTEL_INFO(dev)->gen >= 6) { + ring->add_request = gen6_add_request; + ring->irq_get = gen6_render_ring_get_irq; + ring->irq_put = gen6_render_ring_put_irq; + } else if (IS_GEN5(dev)) { + ring->add_request = pc_render_add_request; + ring->get_seqno = pc_render_get_seqno; + } + + ring->dev = dev; + INIT_LIST_HEAD(&ring->active_list); + INIT_LIST_HEAD(&ring->request_list); + INIT_LIST_HEAD(&ring->gpu_write_list); + + ring->size = size; + ring->effective_size = ring->size; + if (IS_I830(ring->dev)) + ring->effective_size -= 128; + + ring->map.offset = start; + ring->map.size = size; + ring->map.type = 0; + ring->map.flags = 0; + ring->map.mtrr = 0; + + drm_core_ioremap_wc(&ring->map, dev); + if (ring->map.handle == NULL) { + DRM_ERROR("can not ioremap virtual address for" + " ring buffer\n"); + return -ENOMEM; + } + + ring->virtual_start = (void __force __iomem *)ring->map.handle; + return 0; +} + int intel_init_bsd_ring_buffer(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h index be9087e4c9be..61d5220c4b58 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.h +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h @@ -167,4 +167,7 @@ int intel_init_blt_ring_buffer(struct drm_device *dev); u32 intel_ring_get_active_head(struct intel_ring_buffer *ring); void intel_ring_setup_status_page(struct intel_ring_buffer *ring); +/* DRI warts */ +int intel_render_ring_init_dri(struct drm_device *dev, u64 start, u32 size); + #endif /* _INTEL_RINGBUFFER_H_ */ -- cgit v1.2.1 From f7ab9b407b3bc83161c2aa74c992ba4782e87c9c Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 20 Jan 2011 10:03:24 +0000 Subject: drm/i915: Add dependency on CONFIG_TMPFS Without tmpfs, shmem_readpage() is not compiled in causing an OOPS as soon as we try to allocate some swappable pages for GEM. Jan 19 22:52:26 harlie kernel: Modules linked in: i915(+) drm_kms_helper cfbcopyarea video backlight cfbimgblt cfbfillrect Jan 19 22:52:26 harlie kernel: Jan 19 22:52:26 harlie kernel: Pid: 1125, comm: modprobe Not tainted 2.6.37Harlie #10 To be filled by O.E.M./To be filled by O.E.M. Jan 19 22:52:26 harlie kernel: EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 3 Jan 19 22:52:26 harlie kernel: EIP is at 0x0 Jan 19 22:52:26 harlie kernel: EAX: 00000000 EBX: f7b7d000 ECX: f3383100 EDX: f7b7d000 Jan 19 22:52:26 harlie kernel: ESI: f1456118 EDI: 00000000 EBP: f2303c98 ESP: f2303c7c Jan 19 22:52:26 harlie kernel: DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Jan 19 22:52:26 harlie kernel: Process modprobe (pid: 1125, ti=f2302000 task=f259cd80 task.ti=f2302000) Jan 19 22:52:26 harlie kernel: Stack: Jan 19 22:52:26 harlie udevd-work[1072]: '/sbin/modprobe -b pci:v00008086d00000046sv00000000sd00000000bc03sc00i00' unexpected exit with status 0x0009 Jan 19 22:52:26 harlie kernel: c1074061 000000d0 f2f42b80 00000000 000a13d2 f2d5dcc0 00000001 f2303cac Jan 19 22:52:26 harlie kernel: c107416f 00000000 000a13d2 00000000 f2303cd4 f8d620ed f2cee620 00001000 Jan 19 22:52:26 harlie kernel: 00000000 000a13d2 f1456118 f2d5dcc0 f1a40000 00001000 f2303d04 f8d637ab Jan 19 22:52:26 harlie kernel: Call Trace: Jan 19 22:52:26 harlie kernel: [] ? do_read_cache_page+0x71/0x160 Jan 19 22:52:26 harlie kernel: [] ? read_cache_page_gfp+0x1f/0x30 Jan 19 22:52:26 harlie kernel: [] ? i915_gem_object_get_pages+0xad/0x1d0 [i915] Jan 19 22:52:26 harlie kernel: [] ? i915_gem_object_bind_to_gtt+0xeb/0x2d0 [i915] Jan 19 22:52:26 harlie kernel: [] ? i915_gem_object_pin+0x151/0x190 [i915] Jan 19 22:52:26 harlie kernel: [] ? drm_gem_object_init+0x3d/0x60 Jan 19 22:52:26 harlie kernel: [] ? i915_gem_init_ringbuffer+0x105/0x1e0 [i915] Jan 19 22:52:26 harlie kernel: [] ? i915_driver_load+0x667/0x1160 [i915] Reported-by: John J. Stimson-III Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/Kconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 64828a7db77b..3a061094345b 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -100,7 +100,10 @@ config DRM_I830 config DRM_I915 tristate "i915 driver" depends on AGP_INTEL + # we need shmfs for the swappable backing store, and in particular + # the shmem_readpage() which depends upon tmpfs select SHMEM + select TMPFS select DRM_KMS_HELPER select FB_CFB_FILLRECT select FB_CFB_COPYAREA -- cgit v1.2.1 From 475553de2fc861d53396dd8fd14cc22f30ab97ab Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 20 Jan 2011 09:52:56 +0000 Subject: drm/i915: Don't kick-off hangcheck after a DRI interrupt Hangcheck and error recovery is only used by GEM. Reported-by: Herbert Xu Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_irq.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index b8e509ae065e..f0c87bdfa6fa 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -348,8 +348,12 @@ static void notify_ring(struct drm_device *dev, struct intel_ring_buffer *ring) { struct drm_i915_private *dev_priv = dev->dev_private; - u32 seqno = ring->get_seqno(ring); + u32 seqno; + + if (ring->obj == NULL) + return; + seqno = ring->get_seqno(ring); trace_i915_gem_request_complete(dev, seqno); ring->irq_seqno = seqno; -- cgit v1.2.1 From fec2be706dfb1f2f70ffd04319841ec0dfc546b2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 20 Jan 2011 09:13:14 -0800 Subject: Staging: remove unintended Module.symvers file MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit a82ad05ecd9dbd909509a332d3aa5f4ac439a054 (staging: vme: tsi148: fix warning in free_irq) accidentally added a Module.symvers file to the git tree. This patch removes it, sorry about that. Reported-by: Toralf Förster Cc: Emilio G. Cota Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vme/bridges/Module.symvers | 0 1 file changed, 0 insertions(+), 0 deletions(-) delete mode 100644 drivers/staging/vme/bridges/Module.symvers (limited to 'drivers') diff --git a/drivers/staging/vme/bridges/Module.symvers b/drivers/staging/vme/bridges/Module.symvers deleted file mode 100644 index e69de29bb2d1..000000000000 -- cgit v1.2.1 From c7dca47bd6fbb7c215cb1ce6bc40398b4b017752 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 20 Jan 2011 17:00:10 +0000 Subject: drm/i915/ringbuffer: Fix use of stale HEAD position whilst polling for space During suspend, Linus found that his machine would hang for 3 seconds, and identified that intel_ring_buffer_wait() was the culprit: "Because from looking at the code, I get the notion that "intel_read_status_page()" may not be exact. But what happens if that inexact value matches our cached ring->actual_head, so we never even try to read the exact case? Does it _stay_ inexact for arbitrarily long times? If so, we might wait for the ring to empty forever (well, until the timeout - the behavior I see), even though the ring really _is_ empty." As the reported HEAD position is only updated every time it crosses a 64k boundary, whilst draining the ring it is indeed likely to remain one value. If that value matches the last known HEAD position, we never read the true value from the register and so trigger a timeout. Reported-by: Linus Torvalds Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_ringbuffer.c | 40 ++++++++++++++++++++------------- drivers/gpu/drm/i915/intel_ringbuffer.h | 1 - 2 files changed, 24 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 51fbc5e33c55..6218fa97aa1e 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -34,6 +34,14 @@ #include "i915_trace.h" #include "intel_drv.h" +static inline int ring_space(struct intel_ring_buffer *ring) +{ + int space = (ring->head & HEAD_ADDR) - (ring->tail + 8); + if (space < 0) + space += ring->size; + return space; +} + static u32 i915_gem_get_seqno(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; @@ -204,11 +212,9 @@ static int init_ring_common(struct intel_ring_buffer *ring) if (!drm_core_check_feature(ring->dev, DRIVER_MODESET)) i915_kernel_lost_context(ring->dev); else { - ring->head = I915_READ_HEAD(ring) & HEAD_ADDR; + ring->head = I915_READ_HEAD(ring); ring->tail = I915_READ_TAIL(ring) & TAIL_ADDR; - ring->space = ring->head - (ring->tail + 8); - if (ring->space < 0) - ring->space += ring->size; + ring->space = ring_space(ring); } return 0; @@ -921,7 +927,7 @@ static int intel_wrap_ring_buffer(struct intel_ring_buffer *ring) } ring->tail = 0; - ring->space = ring->head - 8; + ring->space = ring_space(ring); return 0; } @@ -933,20 +939,22 @@ int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n) unsigned long end; u32 head; + /* If the reported head position has wrapped or hasn't advanced, + * fallback to the slow and accurate path. + */ + head = intel_read_status_page(ring, 4); + if (head > ring->head) { + ring->head = head; + ring->space = ring_space(ring); + if (ring->space >= n) + return 0; + } + trace_i915_ring_wait_begin (dev); end = jiffies + 3 * HZ; do { - /* If the reported head position has wrapped or hasn't advanced, - * fallback to the slow and accurate path. - */ - head = intel_read_status_page(ring, 4); - if (head < ring->actual_head) - head = I915_READ_HEAD(ring); - ring->actual_head = head; - ring->head = head & HEAD_ADDR; - ring->space = ring->head - (ring->tail + 8); - if (ring->space < 0) - ring->space += ring->size; + ring->head = I915_READ_HEAD(ring); + ring->space = ring_space(ring); if (ring->space >= n) { trace_i915_ring_wait_end(dev); return 0; diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h index 61d5220c4b58..6d6fde85a636 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.h +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h @@ -47,7 +47,6 @@ struct intel_ring_buffer { struct drm_device *dev; struct drm_i915_gem_object *obj; - u32 actual_head; u32 head; u32 tail; int space; -- cgit v1.2.1 From 268eff909afaca93188d2d14554cbf824f6a0e41 Mon Sep 17 00:00:00 2001 From: Ky Srinivasan Date: Thu, 16 Dec 2010 18:59:19 -0700 Subject: Staging: hv: fix sysfs symlink on hv block device The block device does not create the proper symlink in sysfs because we forgot to set up the gendisk structure properly. This patch fixes the issue. Signed-off-by: K. Y. Srinivasan Cc: Hank Janssen Cc: Haiyang Zhang Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/blkvsc_drv.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/hv/blkvsc_drv.c b/drivers/staging/hv/blkvsc_drv.c index b3d05fcfe6d2..4fb809485d9e 100644 --- a/drivers/staging/hv/blkvsc_drv.c +++ b/drivers/staging/hv/blkvsc_drv.c @@ -368,6 +368,7 @@ static int blkvsc_probe(struct device *device) blkdev->gd->first_minor = 0; blkdev->gd->fops = &block_ops; blkdev->gd->private_data = blkdev; + blkdev->gd->driverfs_dev = &(blkdev->device_ctx->device); sprintf(blkdev->gd->disk_name, "hd%c", 'a' + devnum); blkvsc_do_inquiry(blkdev); -- cgit v1.2.1 From d70c673153d42e8aefd5ac296c8159ef222d076b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timo=20Ter=C3=A4s?= Date: Fri, 17 Dec 2010 11:40:24 +0200 Subject: staging: hv: fix netvsc sleeping while atomic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The channel callbacks are called directly from vmbus_event_dpc which runs in tasklet context. These callbacks need to use GFP_ATOMIC. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16701 Cc: Hank Janssen Cc: Haiyang Zhang Signed-off-by: Timo Teräs Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/netvsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/hv/netvsc.c b/drivers/staging/hv/netvsc.c index df9cd131e953..0edbe7483a4c 100644 --- a/drivers/staging/hv/netvsc.c +++ b/drivers/staging/hv/netvsc.c @@ -1279,7 +1279,7 @@ static void netvsc_channel_cb(void *context) /* ASSERT(device); */ packet = kzalloc(NETVSC_PACKET_SIZE * sizeof(unsigned char), - GFP_KERNEL); + GFP_ATOMIC); if (!packet) return; buffer = packet; -- cgit v1.2.1 From a786f915274ba446865a996515c7790a930f04dd Mon Sep 17 00:00:00 2001 From: Hank Janssen Date: Fri, 7 Jan 2011 09:25:39 -0800 Subject: staging: hv: Removed unneeded call to netif_stop_queue() in hv_netvsc Removed the call to netif_stop_queue() in netvsc_probe() as the queue is not initialized at that point and further call to it after queue initialization is really not necessary. This change was prompted after an upstream change went into 2.6.37 (netif_tx_stop_queue) that now checks if netif_stop_queue is called before register with netdev is done. This will eliminate the warning message to the log when hv_netvsc driver starts up. Signed-off-by: Abhishek Kane Signed-off-by: Haiyang Zhang Signed-off-by: Hank Janssen Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/netvsc_drv.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/hv/netvsc_drv.c b/drivers/staging/hv/netvsc_drv.c index 0147b407512c..54706a16dc0a 100644 --- a/drivers/staging/hv/netvsc_drv.c +++ b/drivers/staging/hv/netvsc_drv.c @@ -358,7 +358,6 @@ static int netvsc_probe(struct device *device) /* Set initial state */ netif_carrier_off(net); - netif_stop_queue(net); net_device_ctx = netdev_priv(net); net_device_ctx->device_ctx = device_ctx; -- cgit v1.2.1 From 64911e4b133ff633563d6dd2b021fa1ca0608992 Mon Sep 17 00:00:00 2001 From: Phillip Simbwa Date: Wed, 29 Dec 2010 12:01:16 -0800 Subject: Staging: ath6kl: fix potential buffer overflow Off by one Signed-off-by: Phillip Simbwa Signed-off-by: Vipin Mehta Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsconfig.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsconfig.c b/drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsconfig.c index 0e298dba9fc8..29b8ab44ea47 100644 --- a/drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsconfig.c +++ b/drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsconfig.c @@ -360,8 +360,8 @@ int PSSendOps(void *arg) status = 1; goto complete; } - len = (firmware->size > MAX_BDADDR_FORMAT_LENGTH)? MAX_BDADDR_FORMAT_LENGTH: firmware->size; - memcpy(config_bdaddr, firmware->data,len); + len = min(firmware->size, MAX_BDADDR_FORMAT_LENGTH - 1); + memcpy(config_bdaddr, firmware->data, len); config_bdaddr[len] = '\0'; write_bdaddr(hdev,config_bdaddr,BDADDR_TYPE_STRING); A_RELEASE_FIRMWARE(firmware); -- cgit v1.2.1 From f32b8453e5a5587ae112ba478ae0bbad74e83d22 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 23 Dec 2010 00:07:33 +0300 Subject: Staging: ste_rmi4: use after input_unregister_device() The original code called input_free_device(rmi4_data->input_dev) after input_unregister_device(rmi4_data->input_dev) and that's a double free. This is described in the comments to input_unregister_device(). The normal way to handle this is to make input_register_device() the last function in the probe which can fail. That way you can avoid the call to input_unregister_device() entirely. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c index e8f047e86a32..80183a7e6624 100644 --- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c +++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c @@ -986,12 +986,6 @@ static int __devinit synaptics_rmi4_probe input_set_abs_params(rmi4_data->input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_TOUCH_MAJOR, 0, 0); - retval = input_register_device(rmi4_data->input_dev); - if (retval) { - dev_err(&client->dev, "%s:input register failed\n", __func__); - goto err_input_register; - } - /* Clear interrupts */ synaptics_rmi4_i2c_block_read(rmi4_data, rmi4_data->fn01_data_base_addr + 1, intr_status, @@ -1003,15 +997,20 @@ static int __devinit synaptics_rmi4_probe if (retval) { dev_err(&client->dev, "%s:Unable to get attn irq %d\n", __func__, platformdata->irq_number); - goto err_request_irq; + goto err_unset_clientdata; + } + + retval = input_register_device(rmi4_data->input_dev); + if (retval) { + dev_err(&client->dev, "%s:input register failed\n", __func__); + goto err_free_irq; } return retval; -err_request_irq: +err_free_irq: free_irq(platformdata->irq_number, rmi4_data); - input_unregister_device(rmi4_data->input_dev); -err_input_register: +err_unset_clientdata: i2c_set_clientdata(client, NULL); err_query_dev: if (platformdata->regulator_en) { -- cgit v1.2.1 From a65fd09ac5490133b09d08be91c31ae2f2fa5cad Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 4 Jan 2011 09:02:27 +0300 Subject: Staging: xgfib: put parenthesis in the right place In the original code the parenthesis are in the wrong position, so the conditions are always true. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/xgifb/vb_setmode.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/xgifb/vb_setmode.c b/drivers/staging/xgifb/vb_setmode.c index 7016fdd2509f..e19b932492e1 100644 --- a/drivers/staging/xgifb/vb_setmode.c +++ b/drivers/staging/xgifb/vb_setmode.c @@ -3954,8 +3954,8 @@ void XGI_GetCRT2ResInfo(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned char XGI_IsLCDDualLink(struct vb_device_info *pVBInfo) { - if ((((pVBInfo->VBInfo & SetCRT2ToLCD) | SetCRT2ToLCDA)) - && (pVBInfo->LCDInfo & SetLCDDualLink)) /* shampoo0129 */ + if ((pVBInfo->VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) && + (pVBInfo->LCDInfo & SetLCDDualLink)) /* shampoo0129 */ return 1; return 0; @@ -8773,7 +8773,7 @@ unsigned short XGI_GetVCLK2Ptr(unsigned short ModeNo, if (pVBInfo->IF_DEF_LVDS == 0) { CRT2Index = CRT2Index >> 6; /* for LCD */ - if (((pVBInfo->VBInfo & SetCRT2ToLCD) | SetCRT2ToLCDA)) { /*301b*/ + if (pVBInfo->VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) { /*301b*/ if (pVBInfo->LCDResInfo != Panel1024x768) VCLKIndex = LCDXlat2VCLK[CRT2Index]; else -- cgit v1.2.1 From 27c82819a5a42f08fc0f787ab1b0c129cbdda801 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 12 Jan 2011 22:24:28 -0600 Subject: staging: rt2870sta: Add ID for Linksys WUSB100v2 This device was tested with rt2870sta by setting new_id. Signed-off-by: Larry Finger Tested-by: Brian Ormond Cc: Stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rt2860/usb_main_dev.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c index ee68d51caa4e..322bf49ee906 100644 --- a/drivers/staging/rt2860/usb_main_dev.c +++ b/drivers/staging/rt2860/usb_main_dev.c @@ -106,6 +106,7 @@ struct usb_device_id rtusb_usb_id[] = { {USB_DEVICE(0x0411, 0x016f)}, /* MelCo.,Inc. WLI-UC-G301N */ {USB_DEVICE(0x1737, 0x0070)}, /* Linksys WUSB100 */ {USB_DEVICE(0x1737, 0x0071)}, /* Linksys WUSB600N */ + {USB_DEVICE(0x1737, 0x0078)}, /* Linksys WUSB100v2 */ {USB_DEVICE(0x0411, 0x00e8)}, /* Buffalo WLI-UC-G300N */ {USB_DEVICE(0x050d, 0x815c)}, /* Belkin F5D8053 */ {USB_DEVICE(0x100D, 0x9031)}, /* Motorola 2770 */ -- cgit v1.2.1 From 8e290fd41a15e392af87a33c9c4db3daffcd558b Mon Sep 17 00:00:00 2001 From: "Guzman Lugo, Fernando" Date: Thu, 13 Jan 2011 23:34:52 -0600 Subject: staging: tidspbridge: configure full L1 MMU range IVA MMU can manage up to 4GB of address space through its page tables, given that it's L1 is divided into 1MB sections it requires at least 16KB for its table which represents 4096 entries of 32 bits each. Previously, only 1GB was being handled by setting the page table size to 4KB, any virtual address beyond of the L1 size used, would fall into memory that does not belong to L1 translation tables, leading to unpredictable results. So, set the L1 table size to cover the entire MMU range (4GB) whether is meant to be used or not. Reported-by: Felipe Contreras Signed-off-by: Fernando Guzman Lugo Signed-off-by: Felipe Contreras Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/core/tiomap3430.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c index a3b0a183d570..c3126e2e23f0 100644 --- a/drivers/staging/tidspbridge/core/tiomap3430.c +++ b/drivers/staging/tidspbridge/core/tiomap3430.c @@ -786,10 +786,7 @@ static int bridge_dev_create(struct bridge_dev_context pt_attrs = kzalloc(sizeof(struct pg_table_attrs), GFP_KERNEL); if (pt_attrs != NULL) { - /* Assuming that we use only DSP's memory map - * until 0x4000:0000 , we would need only 1024 - * L1 enties i.e L1 size = 4K */ - pt_attrs->l1_size = 0x1000; + pt_attrs->l1_size = SZ_16K; /* 4096 entries of 32 bits */ align_size = pt_attrs->l1_size; /* Align sizes are expected to be power of 2 */ /* we like to get aligned on L1 table size */ -- cgit v1.2.1 From e375870b9295be40de7372c3c9de6799e254c96a Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 14 Jan 2011 14:54:08 -0600 Subject: staging: r8712u: Fix memory leak in firmware loading The error path leaks the firmware struct. Signed-off-by: Larry Finger Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8712/hal_init.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8712/hal_init.c b/drivers/staging/rtl8712/hal_init.c index 32088a641eba..84be383abec3 100644 --- a/drivers/staging/rtl8712/hal_init.c +++ b/drivers/staging/rtl8712/hal_init.c @@ -128,12 +128,13 @@ static u8 rtl8712_dl_fw(struct _adapter *padapter) u8 *ptmpchar = NULL, *ppayload, *ptr; struct tx_desc *ptx_desc; u32 txdscp_sz = sizeof(struct tx_desc); + u8 ret = _FAIL; ulfilelength = rtl871x_open_fw(padapter, &phfwfile_hdl, &pmappedfw); if (pmappedfw && (ulfilelength > 0)) { update_fwhdr(&fwhdr, pmappedfw); if (chk_fwhdr(&fwhdr, ulfilelength) == _FAIL) - goto exit_fail; + goto firmware_rel; fill_fwpriv(padapter, &fwhdr.fwpriv); /* firmware check ok */ maxlen = (fwhdr.img_IMEM_size > fwhdr.img_SRAM_size) ? @@ -141,7 +142,7 @@ static u8 rtl8712_dl_fw(struct _adapter *padapter) maxlen += txdscp_sz; ptmpchar = _malloc(maxlen + FWBUFF_ALIGN_SZ); if (ptmpchar == NULL) - return _FAIL; + goto firmware_rel; ptx_desc = (struct tx_desc *)(ptmpchar + FWBUFF_ALIGN_SZ - ((addr_t)(ptmpchar) & (FWBUFF_ALIGN_SZ - 1))); @@ -273,11 +274,13 @@ static u8 rtl8712_dl_fw(struct _adapter *padapter) goto exit_fail; } else goto exit_fail; - return _SUCCESS; + ret = _SUCCESS; exit_fail: kfree(ptmpchar); - return _FAIL; +firmware_rel: + release_firmware((struct firmware *)phfwfile_hdl); + return ret; } uint rtl8712_hal_init(struct _adapter *padapter) -- cgit v1.2.1 From 9c33008412683eba91bce2dc4575f28c728b6bd1 Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Mon, 10 Jan 2011 20:09:30 +0000 Subject: staging: rt2860: Fix incorrect netif_stop_queue usage warning The TX queues are allocated inside register_netdev. It doesn't make any sense to stop the queue before allocation. Signed-off-by: Denis Kirjanov Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rt2860/rt_main_dev.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c index 701561d6b6fd..236dd36d349a 100644 --- a/drivers/staging/rt2860/rt_main_dev.c +++ b/drivers/staging/rt2860/rt_main_dev.c @@ -484,8 +484,6 @@ struct net_device *RtmpPhyNetDevInit(struct rt_rtmp_adapter *pAd, net_dev->ml_priv = (void *)pAd; pAd->net_dev = net_dev; - netif_stop_queue(net_dev); - return net_dev; } -- cgit v1.2.1 From e71a7fd259943a2c2e11484880c80248ad139fe5 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Thu, 13 Jan 2011 18:37:36 +0100 Subject: iio: Fixpoint formatted output bugfix Fix some ADC drivers' _scale interface to correct fixpoint formatted output Signed-off-by: Roland Stigge Acked-by: Jonathan Cameron Acked-by: Michael Hennerich Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/iio/adc/ad7476_core.c | 2 +- drivers/staging/iio/adc/ad799x_core.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/iio/adc/ad7476_core.c b/drivers/staging/iio/adc/ad7476_core.c index deb68c8a6e18..b8b54da67c63 100644 --- a/drivers/staging/iio/adc/ad7476_core.c +++ b/drivers/staging/iio/adc/ad7476_core.c @@ -68,7 +68,7 @@ static ssize_t ad7476_show_scale(struct device *dev, /* Corresponds to Vref / 2^(bits) */ unsigned int scale_uv = (st->int_vref_mv * 1000) >> st->chip_info->bits; - return sprintf(buf, "%d.%d\n", scale_uv / 1000, scale_uv % 1000); + return sprintf(buf, "%d.%03d\n", scale_uv / 1000, scale_uv % 1000); } static IIO_DEVICE_ATTR(in_scale, S_IRUGO, ad7476_show_scale, NULL, 0); diff --git a/drivers/staging/iio/adc/ad799x_core.c b/drivers/staging/iio/adc/ad799x_core.c index 6309d521a864..89ccf375a188 100644 --- a/drivers/staging/iio/adc/ad799x_core.c +++ b/drivers/staging/iio/adc/ad799x_core.c @@ -432,7 +432,7 @@ static ssize_t ad799x_show_scale(struct device *dev, /* Corresponds to Vref / 2^(bits) */ unsigned int scale_uv = (st->int_vref_mv * 1000) >> st->chip_info->bits; - return sprintf(buf, "%d.%d\n", scale_uv / 1000, scale_uv % 1000); + return sprintf(buf, "%d.%03d\n", scale_uv / 1000, scale_uv % 1000); } static IIO_DEVICE_ATTR(in_scale, S_IRUGO, ad799x_show_scale, NULL, 0); -- cgit v1.2.1 From e7bf352fcd85c33b0805da891fc97fea8b5e996e Mon Sep 17 00:00:00 2001 From: roel kluin Date: Mon, 3 Jan 2011 11:59:48 -0800 Subject: Staging: speakup: &&/|| confusion in silent_store() Fix test: the branch is always taken. Signed-off-by: Roel Kluin Cc: Andrew Morton Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/speakup/kobjects.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/speakup/kobjects.c b/drivers/staging/speakup/kobjects.c index 408bb9b3303e..07a7f5432597 100644 --- a/drivers/staging/speakup/kobjects.c +++ b/drivers/staging/speakup/kobjects.c @@ -332,7 +332,7 @@ static ssize_t silent_store(struct kobject *kobj, struct kobj_attribute *attr, unsigned long flags; len = strlen(buf); - if (len > 0 || len < 3) { + if (len > 0 && len < 3) { ch = buf[0]; if (ch == '\n') ch = '0'; -- cgit v1.2.1 From d1ce318496f5943d2cc5e20171fc383a59a1421f Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Wed, 19 Jan 2011 11:48:44 +0000 Subject: staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card The ni_labpc driver module only requests a shared IRQ for PCI devices, requesting a non-shared IRQ for non-PCI devices. As this module is also used by the ni_labpc_cs module for certain National Instruments PCMCIA cards, it also needs to request a shared IRQ for PCMCIA devices, otherwise you get a IRQ mismatch with the CardBus controller. Signed-off-by: Ian Abbott Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_labpc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c index 4d1868d04bac..0728c3c0cb0e 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.c +++ b/drivers/staging/comedi/drivers/ni_labpc.c @@ -575,7 +575,8 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase, /* grab our IRQ */ if (irq) { isr_flags = 0; - if (thisboard->bustype == pci_bustype) + if (thisboard->bustype == pci_bustype + || thisboard->bustype == pcmcia_bustype) isr_flags |= IRQF_SHARED; if (request_irq(irq, labpc_interrupt, isr_flags, driver_labpc.driver_name, dev)) { -- cgit v1.2.1 From 85d139c977dd13cd1ca5cb3b9d8e39cb477eaf0c Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Fri, 14 Jan 2011 17:49:51 -0600 Subject: staging: tidspbridge: replace mbox callback with notifier_call Lately, mailbox callbacks have been replaced by notifier block call chains, this needs to be changed in the users of mailbox, otherwise compilation will break due to missing parameters. For this new change to work, io_mbox_msg needs to be compatible with the notifier_call definition. Reported-by: Hari Kanigeri Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/core/io_sm.c | 8 ++++---- drivers/staging/tidspbridge/core/tiomap3430.c | 10 ++++++---- .../staging/tidspbridge/include/dspbridge/io_sm.h | 21 ++++++++------------- 3 files changed, 18 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/tidspbridge/core/io_sm.c b/drivers/staging/tidspbridge/core/io_sm.c index 571864555ddd..27e0aa81a584 100644 --- a/drivers/staging/tidspbridge/core/io_sm.c +++ b/drivers/staging/tidspbridge/core/io_sm.c @@ -949,7 +949,7 @@ func_end: * Calls the Bridge's CHNL_ISR to determine if this interrupt is ours, then * schedules a DPC to dispatch I/O. */ -void io_mbox_msg(u32 msg) +int io_mbox_msg(struct notifier_block *self, unsigned long len, void *msg) { struct io_mgr *pio_mgr; struct dev_object *dev_obj; @@ -959,9 +959,9 @@ void io_mbox_msg(u32 msg) dev_get_io_mgr(dev_obj, &pio_mgr); if (!pio_mgr) - return; + return NOTIFY_BAD; - pio_mgr->intr_val = (u16)msg; + pio_mgr->intr_val = (u16)((u32)msg); if (pio_mgr->intr_val & MBX_PM_CLASS) io_dispatch_pm(pio_mgr); @@ -973,7 +973,7 @@ void io_mbox_msg(u32 msg) spin_unlock_irqrestore(&pio_mgr->dpc_lock, flags); tasklet_schedule(&pio_mgr->dpc_tasklet); } - return; + return NOTIFY_OK; } /* diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c index c3126e2e23f0..a3f69f6f505f 100644 --- a/drivers/staging/tidspbridge/core/tiomap3430.c +++ b/drivers/staging/tidspbridge/core/tiomap3430.c @@ -223,6 +223,10 @@ static struct bridge_drv_interface drv_interface_fxns = { bridge_msg_set_queue_id, }; +static struct notifier_block dsp_mbox_notifier = { + .notifier_call = io_mbox_msg, +}; + static inline void flush_all(struct bridge_dev_context *dev_context) { if (dev_context->dw_brd_state == BRD_DSP_HIBERNATION || @@ -553,7 +557,7 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt, * Enable Mailbox events and also drain any pending * stale messages. */ - dev_context->mbox = omap_mbox_get("dsp"); + dev_context->mbox = omap_mbox_get("dsp", &dsp_mbox_notifier); if (IS_ERR(dev_context->mbox)) { dev_context->mbox = NULL; pr_err("%s: Failed to get dsp mailbox handle\n", @@ -563,8 +567,6 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt, } if (!status) { - dev_context->mbox->rxq->callback = (int (*)(void *))io_mbox_msg; - /*PM_IVA2GRPSEL_PER = 0xC0;*/ temp = readl(resources->dw_per_pm_base + 0xA8); temp = (temp & 0xFFFFFF30) | 0xC0; @@ -685,7 +687,7 @@ static int bridge_brd_stop(struct bridge_dev_context *dev_ctxt) /* Disable the mailbox interrupts */ if (dev_context->mbox) { omap_mbox_disable_irq(dev_context->mbox, IRQ_RX); - omap_mbox_put(dev_context->mbox); + omap_mbox_put(dev_context->mbox, &dsp_mbox_notifier); dev_context->mbox = NULL; } /* Reset IVA2 clocks*/ diff --git a/drivers/staging/tidspbridge/include/dspbridge/io_sm.h b/drivers/staging/tidspbridge/include/dspbridge/io_sm.h index 18aec55d8647..8242c70e09dd 100644 --- a/drivers/staging/tidspbridge/include/dspbridge/io_sm.h +++ b/drivers/staging/tidspbridge/include/dspbridge/io_sm.h @@ -72,22 +72,17 @@ extern void io_dpc(unsigned long ref_data); /* * ======== io_mbox_msg ======== * Purpose: - * Main interrupt handler for the shared memory Bridge channel manager. - * Calls the Bridge's chnlsm_isr to determine if this interrupt is ours, - * then schedules a DPC to dispatch I/O. + * Main message handler for the shared memory Bridge channel manager. + * Determine if this message is ours, then schedules a DPC to + * dispatch I/O. * Parameters: - * ref_data: Pointer to the channel manager object for this board. - * Set in an initial call to ISR_Install(). + * self: Pointer to its own notifier_block struct. + * len: Length of message. + * msg: Message code received. * Returns: - * TRUE if interrupt handled; FALSE otherwise. - * Requires: - * Must be in locked memory if executing in kernel mode. - * Must only call functions which are in locked memory if Kernel mode. - * Must only call asynchronous services. - * Interrupts are disabled and EOI for this interrupt has been sent. - * Ensures: + * NOTIFY_OK if handled; NOTIFY_BAD otherwise. */ -void io_mbox_msg(u32 msg); +int io_mbox_msg(struct notifier_block *self, unsigned long len, void *msg); /* * ======== io_request_chnl ======== -- cgit v1.2.1 From b23fffd778c312b8fb258d342051fcbdf6712128 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 20 Jan 2011 13:14:10 -0800 Subject: ACPI / Battery: remove battery refresh on resume This partially reverts commit da8aeb92d4853f37e281f11fddf61f9c7d84c3cd ("ACPI / Battery: Update information on info notification and resume"), which causes a hang on resume on at least some machines. This bug was bisected on an ASUS EeePC 901, which hangs at resume time if we do that "acpi_battery_refresh(battery)" in the battery resume function. Rafael suspects we'll still need to refresh the sysfs files upon resume, but that that can be done from a PM notifier (that will run after thawing user space). Bisected-and-tested-by: Linus Torvalds Cc: Matthew Garrett Cc: Len Brown Acked-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- drivers/acpi/battery.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 68bc227e7c4c..ac1a599f5147 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -998,7 +998,6 @@ static int acpi_battery_resume(struct acpi_device *device) if (!device) return -EINVAL; battery = acpi_driver_data(device); - acpi_battery_refresh(battery); battery->update_time = 0; acpi_battery_update(battery); return 0; -- cgit v1.2.1 From 6044565af458e7fa6e748bff437ecc49dea88d79 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 15 Jan 2011 18:19:48 +0100 Subject: firewire: core: fix unstable I/O with Canon camcorder Regression since commit 10389536742c, "firewire: core: check for 1394a compliant IRM, fix inaccessibility of Sony camcorder": The camcorder Canon MV5i generates lots of bus resets when asynchronous requests are sent to it (e.g. Config ROM read requests or FCP Command write requests) if the camcorder is not root node. This causes drop- outs in videos or makes the camcorder entirely inaccessible. https://bugzilla.redhat.com/show_bug.cgi?id=633260 Fix this by allowing any Canon device, even if it is a pre-1394a IRM like MV5i are, to remain root node (if it is at least Cycle Master capable). With the FireWire controller cards that I tested, MV5i always becomes root node when plugged in and left to its own devices. Reported-by: Ralf Lange Signed-off-by: Stefan Richter Cc: # 2.6.32.y and newer --- drivers/firewire/core-card.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c index be0492398ef9..24ff35511e2b 100644 --- a/drivers/firewire/core-card.c +++ b/drivers/firewire/core-card.c @@ -75,6 +75,8 @@ static size_t config_rom_length = 1 + 4 + 1 + 1; #define BIB_IRMC ((1) << 31) #define NODE_CAPABILITIES 0x0c0083c0 /* per IEEE 1394 clause 8.3.2.6.5.2 */ +#define CANON_OUI 0x000085 + static void generate_config_rom(struct fw_card *card, __be32 *config_rom) { struct fw_descriptor *desc; @@ -284,6 +286,7 @@ static void bm_work(struct work_struct *work) bool root_device_is_running; bool root_device_is_cmc; bool irm_is_1394_1995_only; + bool keep_this_irm; spin_lock_irq(&card->lock); @@ -305,6 +308,10 @@ static void bm_work(struct work_struct *work) irm_is_1394_1995_only = irm_device && irm_device->config_rom && (irm_device->config_rom[2] & 0x000000f0) == 0; + /* Canon MV5i works unreliably if it is not root node. */ + keep_this_irm = irm_device && irm_device->config_rom && + irm_device->config_rom[3] >> 8 == CANON_OUI; + root_id = root_node->node_id; irm_id = card->irm_node->node_id; local_id = card->local_node->node_id; @@ -333,7 +340,7 @@ static void bm_work(struct work_struct *work) goto pick_me; } - if (irm_is_1394_1995_only) { + if (irm_is_1394_1995_only && !keep_this_irm) { new_root_id = local_id; fw_notify("%s, making local node (%02x) root.\n", "IRM is not 1394a compliant", new_root_id); @@ -382,7 +389,7 @@ static void bm_work(struct work_struct *work) spin_lock_irq(&card->lock); - if (rcode != RCODE_COMPLETE) { + if (rcode != RCODE_COMPLETE && !keep_this_irm) { /* * The lock request failed, maybe the IRM * isn't really IRM capable after all. Let's -- cgit v1.2.1 From 74a145049938b73b7e5421423f64a254d4192d3f Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Mon, 29 Nov 2010 04:09:52 +0200 Subject: firewire: net: invalidate ARP entries of removed nodes This makes it possible to resume communication with a node that dropped off the bus for a brief period. Otherwise communication will only be possible after ARP cache entry timeouts. Signed-off-by: Maxim Levitsky Signed-off-by: Stefan Richter (rebased) --- drivers/firewire/net.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c index c2e194c58667..7ed08fd1214e 100644 --- a/drivers/firewire/net.c +++ b/drivers/firewire/net.c @@ -191,6 +191,7 @@ struct fwnet_peer { struct fwnet_device *dev; u64 guid; u64 fifo; + __be32 ip; /* guarded by dev->lock */ struct list_head pd_list; /* received partial datagrams */ @@ -570,6 +571,8 @@ static int fwnet_finish_incoming_packet(struct net_device *net, peer->speed = sspd; if (peer->max_payload > max_payload) peer->max_payload = max_payload; + + peer->ip = arp1394->sip; } spin_unlock_irqrestore(&dev->lock, flags); @@ -1470,6 +1473,7 @@ static int fwnet_add_peer(struct fwnet_device *dev, peer->dev = dev; peer->guid = (u64)device->config_rom[3] << 32 | device->config_rom[4]; peer->fifo = FWNET_NO_FIFO_ADDR; + peer->ip = 0; INIT_LIST_HEAD(&peer->pd_list); peer->pdg_size = 0; peer->datagram_label = 0; @@ -1589,10 +1593,13 @@ static int fwnet_remove(struct device *_dev) mutex_lock(&fwnet_device_mutex); + net = dev->netdev; + if (net && peer->ip) + arp_invalidate(net, peer->ip); + fwnet_remove_peer(peer, dev); if (list_empty(&dev->peer_list)) { - net = dev->netdev; unregister_netdev(net); if (dev->local_fifo != FWNET_NO_FIFO_ADDR) -- cgit v1.2.1 From 324719978dbb3ffad5a2e3d85af6c5dbbb766b99 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Thu, 20 Jan 2011 00:07:46 +0100 Subject: firewire: net: is not experimental anymore thanks to Clemens' and Maxim's fixes to firewire-ohci and -net in the last two kernel releases. Signed-off-by: Stefan Richter --- drivers/firewire/Kconfig | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig index 68f942cb30f2..0c56989cd907 100644 --- a/drivers/firewire/Kconfig +++ b/drivers/firewire/Kconfig @@ -49,15 +49,13 @@ config FIREWIRE_SBP2 configuration section. config FIREWIRE_NET - tristate "IP networking over 1394 (EXPERIMENTAL)" - depends on FIREWIRE && INET && EXPERIMENTAL + tristate "IP networking over 1394" + depends on FIREWIRE && INET help This enables IPv4 over IEEE 1394, providing IP connectivity with other implementations of RFC 2734 as found on several operating systems. Multicast support is currently limited. - NOTE, this driver is not stable yet! - To compile this driver as a module, say M here: The module will be called firewire-net. -- cgit v1.2.1 From 2d8f4595d1f275f424a8920bb2563fc547661213 Mon Sep 17 00:00:00 2001 From: Max Vozeler Date: Wed, 12 Jan 2011 15:01:59 +0200 Subject: staging: usbip: stub: update refcounts for devices and interfaces The stub driver expects to access the usb interface and usb device structures even if the device has been disconnected in the meantime. This change gets a reference to them in the stub probe function using usb_get_intf()/usb_get_dev() and drops them in the disconnect function. This fixes an oops observed with a Logic Controls Line display (0fa8:a030) which disconnects itself when it is reset: [ 1348.562274] BUG: unable to handle kernel paging request at 5f7433e5 [ 1348.562327] IP: [] usb_lock_device_for_reset+0x22/0xd0 [ 1348.562374] *pde = 00000000 [ 1348.562397] Oops: 0000 [#1] [ 1348.562418] last sysfs file: /sys/devices/pci0000:00/0000:00:10.2/usb4/4-1/bConfigurationValue [ 1348.562454] Modules linked in: usbip vhci_hcd usbip_common_mod fbcon tileblit font bitblit softcursor serio_raw uvesafb pcspkr via_rng snd_via82xx gameport snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_timer snd_seq_device snd usbhid hid via_rhine soundcore mii igel_flash aufs pata_via [ 1348.562649] [ 1348.562670] Pid: 2855, comm: usbip_eh Not tainted (2.6.32 #23.37-ud-r113) M300C [ 1348.562704] EIP: 0060:[] EFLAGS: 00010216 CPU: 0 [ 1348.562734] EIP is at usb_lock_device_for_reset+0x22/0xd0 [ 1348.562762] EAX: 5f7433cd EBX: 5f7433cd ECX: de293a5c EDX: dd326a00 [ 1348.562793] ESI: 5f7433cd EDI: 000400f6 EBP: cf43ff48 ESP: cf43ff38 [ 1348.562824] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 1348.562854] Process usbip_eh (pid: 2855, ti=cf43e000 task=d2c7f230 task.ti=cf43e000) [ 1348.562884] Stack: [ 1348.562900] d6ec9960 de2939cc 5f7433cd 5f743431 cf43ff70 df8fd32f de2939cc d2c7f230 [ 1348.562940] <0> cf43ff70 00000282 00000282 de2939cc d2c7f230 d2c7f230 cf43ffa8 df84416d [ 1348.562987] <0> cf43ff88 d2c7f230 de293a24 d2c7f230 00000000 d2c7f230 c014e760 cf43ff94 [ 1348.563042] Call Trace: [ 1348.563073] [] ? stub_device_reset+0x3f/0x110 [usbip] [ 1348.563114] [] ? event_handler_loop+0xcd/0xe8 [usbip_common_mod] [ 1348.563156] [] ? autoremove_wake_function+0x0/0x50 [ 1348.563193] [] ? usbip_thread+0x0/0x60 [usbip_common_mod] [ 1348.563230] [] ? usbip_thread+0x51/0x60 [usbip_common_mod] [ 1348.563265] [] ? kthread+0x74/0x80 [ 1348.563294] [] ? kthread+0x0/0x80 [ 1348.563326] [] ? kernel_thread_helper+0x7/0x10 [ 1348.563351] Code: 00 e8 73 4d 00 00 5d c3 90 55 89 e5 83 ec 10 89 5d f4 89 75 f8 89 7d fc 0f 1f 44 00 00 8b 3d c0 2e 67 c0 81 c7 fa 00 00 00 89 c3 <8b> 40 18 89 d6 85 c0 75 15 b8 ed ff ff ff 8b 5d f4 8b 75 f8 8b [ 1348.563528] EIP: [] usb_lock_device_for_reset+0x22/0xd0 SS:ESP 0068:cf43ff38 [ 1348.563570] CR2: 000000005f7433e5 [ 1348.563593] ---[ end trace 9c3f1e3a2e5299d9 ]--- Signed-off-by: Max Vozeler Tested-by: Mark Wehby Tested-by: Steven Harms Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/stub.h | 1 + drivers/staging/usbip/stub_dev.c | 18 ++++++++++++++---- drivers/staging/usbip/stub_rx.c | 4 ++-- 3 files changed, 17 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/usbip/stub.h b/drivers/staging/usbip/stub.h index 30dbfb6d16f2..d73267961ef4 100644 --- a/drivers/staging/usbip/stub.h +++ b/drivers/staging/usbip/stub.h @@ -32,6 +32,7 @@ struct stub_device { struct usb_interface *interface; + struct usb_device *udev; struct list_head list; struct usbip_device ud; diff --git a/drivers/staging/usbip/stub_dev.c b/drivers/staging/usbip/stub_dev.c index b186b5fed2b9..a7ce51cc8909 100644 --- a/drivers/staging/usbip/stub_dev.c +++ b/drivers/staging/usbip/stub_dev.c @@ -258,10 +258,11 @@ static void stub_shutdown_connection(struct usbip_device *ud) static void stub_device_reset(struct usbip_device *ud) { struct stub_device *sdev = container_of(ud, struct stub_device, ud); - struct usb_device *udev = interface_to_usbdev(sdev->interface); + struct usb_device *udev = sdev->udev; int ret; usbip_udbg("device reset"); + ret = usb_lock_device_for_reset(udev, sdev->interface); if (ret < 0) { dev_err(&udev->dev, "lock for reset\n"); @@ -309,7 +310,8 @@ static void stub_device_unusable(struct usbip_device *ud) * * Allocates and initializes a new stub_device struct. */ -static struct stub_device *stub_device_alloc(struct usb_interface *interface) +static struct stub_device *stub_device_alloc(struct usb_device *udev, + struct usb_interface *interface) { struct stub_device *sdev; int busnum = interface_to_busnum(interface); @@ -324,7 +326,8 @@ static struct stub_device *stub_device_alloc(struct usb_interface *interface) return NULL; } - sdev->interface = interface; + sdev->interface = usb_get_intf(interface); + sdev->udev = usb_get_dev(udev); /* * devid is defined with devnum when this driver is first allocated. @@ -450,11 +453,12 @@ static int stub_probe(struct usb_interface *interface, return err; } + usb_get_intf(interface); return 0; } /* ok. this is my device. */ - sdev = stub_device_alloc(interface); + sdev = stub_device_alloc(udev, interface); if (!sdev) return -ENOMEM; @@ -476,6 +480,8 @@ static int stub_probe(struct usb_interface *interface, dev_err(&interface->dev, "create sysfs files for %s\n", udev_busid); usb_set_intfdata(interface, NULL); + usb_put_intf(interface); + busid_priv->interf_count = 0; busid_priv->sdev = NULL; @@ -545,6 +551,7 @@ static void stub_disconnect(struct usb_interface *interface) if (busid_priv->interf_count > 1) { busid_priv->interf_count--; shutdown_busid(busid_priv); + usb_put_intf(interface); return; } @@ -554,6 +561,9 @@ static void stub_disconnect(struct usb_interface *interface) /* 1. shutdown the current connection */ shutdown_busid(busid_priv); + usb_put_dev(sdev->udev); + usb_put_intf(interface); + /* 3. free sdev */ busid_priv->sdev = NULL; stub_device_free(sdev); diff --git a/drivers/staging/usbip/stub_rx.c b/drivers/staging/usbip/stub_rx.c index 3de6fd2539dc..ae6ac82754a4 100644 --- a/drivers/staging/usbip/stub_rx.c +++ b/drivers/staging/usbip/stub_rx.c @@ -364,7 +364,7 @@ static struct stub_priv *stub_priv_alloc(struct stub_device *sdev, static int get_pipe(struct stub_device *sdev, int epnum, int dir) { - struct usb_device *udev = interface_to_usbdev(sdev->interface); + struct usb_device *udev = sdev->udev; struct usb_host_endpoint *ep; struct usb_endpoint_descriptor *epd = NULL; @@ -484,7 +484,7 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, int ret; struct stub_priv *priv; struct usbip_device *ud = &sdev->ud; - struct usb_device *udev = interface_to_usbdev(sdev->interface); + struct usb_device *udev = sdev->udev; int pipe = get_pipe(sdev, pdu->base.ep, pdu->base.direction); -- cgit v1.2.1 From 7606ee8aa33287dd3e6eb44c78541b87a413a325 Mon Sep 17 00:00:00 2001 From: Max Vozeler Date: Wed, 12 Jan 2011 15:02:00 +0200 Subject: staging: usbip: vhci: update reference count for usb_device This fixes an oops observed when reading status during removal of a device: [ 1706.648285] general protection fault: 0000 [#1] SMP [ 1706.648294] last sysfs file: /sys/devices/platform/vhci_hcd/status [ 1706.648297] CPU 1 [ 1706.648300] Modules linked in: binfmt_misc microcode fuse loop vhci_hcd(N) usbip(N) usbcore usbip_common_mod(N) rtc_core rtc_lib joydev dm_mirror dm_region_hash dm_log linear dm_snapshot xennet dm_mod ext3 mbcache jbd processor thermal_sys hwmon xenblk cdrom [ 1706.648324] Supported: Yes [ 1706.648327] Pid: 10422, comm: usbip Tainted: G N 2.6.32.12-0.7-xen #1 [ 1706.648330] RIP: e030:[] [] strnlen+0x5/0x40 [ 1706.648340] RSP: e02b:ffff8800a994dd30 EFLAGS: 00010286 [ 1706.648343] RAX: ffffffff80481ec1 RBX: 0000000000000000 RCX: 0000000000000002 [ 1706.648347] RDX: 00200d1d4f1c001c RSI: ffffffffffffffff RDI: 00200d1d4f1c001c [ 1706.648350] RBP: ffff880129a1c0aa R08: ffffffffa01901c4 R09: 0000000000000006 [ 1706.648353] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800a9a1c0ab [ 1706.648357] R13: 00200d1d4f1c001c R14: 00000000ffffffff R15: ffff880129a1c0aa [ 1706.648363] FS: 00007f2f2e9ca700(0000) GS:ffff880001018000(0000) knlGS:0000000000000000 [ 1706.648367] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1706.648370] CR2: 000000000071b048 CR3: 00000000b4b68000 CR4: 0000000000002660 [ 1706.648374] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1706.648378] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1706.648381] Process usbip (pid: 10422, threadinfo ffff8800a994c000, task ffff88007b170200) [ 1706.648385] Stack: [ 1706.648387] ffffffff801b28c9 0000000000000002 ffffffffa01901c4 ffff8800a9a1c0ab [ 1706.648391] <0> ffffffffa01901c6 ffff8800a994de08 ffffffff801b339b 0000000000000004 [ 1706.648397] <0> 0000000affffffff ffffffffffffffff 00000000000067c0 0000000000000000 [ 1706.648404] Call Trace: [ 1706.648413] [] string+0x39/0xe0 [ 1706.648419] [] vsnprintf+0x1eb/0x620 [ 1706.648423] [] sprintf+0x43/0x50 [ 1706.648429] [] show_status+0x1b9/0x220 [vhci_hcd] [ 1706.648438] [] dev_attr_show+0x27/0x60 [ 1706.648445] [] sysfs_read_file+0x101/0x1d0 [ 1706.648451] [] vfs_read+0xc7/0x130 [ 1706.648457] [] sys_read+0x53/0xa0 [ 1706.648462] [] system_call_fastpath+0x16/0x1b [ 1706.648468] [<00007f2f2de40f30>] 0x7f2f2de40f30 [ 1706.648470] Code: 66 0f 1f 44 00 00 48 83 c2 01 80 3a 00 75 f7 48 89 d0 48 29 f8 f3 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 85 f6 74 29 <80> 3f 00 74 24 48 8d 56 ff 48 89 f8 eb 0e 0f 1f 44 00 00 48 83 [ 1706.648507] RIP [] strnlen+0x5/0x40 [ 1706.648511] RSP [ 1706.649575] ---[ end trace b4eb72bf2e149593 ]--- Signed-off-by: Max Vozeler Tested-by: Mark Wehby Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/vhci_hcd.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c index 08bd26a245d5..5f1e2b0a628a 100644 --- a/drivers/staging/usbip/vhci_hcd.c +++ b/drivers/staging/usbip/vhci_hcd.c @@ -607,7 +607,9 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, dev_info(dev, "SetAddress Request (%d) to port %d\n", ctrlreq->wValue, vdev->rhport); - vdev->udev = urb->dev; + if (vdev->udev) + usb_put_dev(vdev->udev); + vdev->udev = usb_get_dev(urb->dev); spin_lock(&vdev->ud.lock); vdev->ud.status = VDEV_ST_USED; @@ -627,8 +629,9 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, "Get_Descriptor to device 0 " "(get max pipe size)\n"); - /* FIXME: reference count? (usb_get_dev()) */ - vdev->udev = urb->dev; + if (vdev->udev) + usb_put_dev(vdev->udev); + vdev->udev = usb_get_dev(urb->dev); goto out; default: @@ -887,6 +890,10 @@ static void vhci_device_reset(struct usbip_device *ud) vdev->speed = 0; vdev->devid = 0; + if (vdev->udev) + usb_put_dev(vdev->udev); + vdev->udev = NULL; + ud->tcp_socket = NULL; ud->status = VDEV_ST_NULL; -- cgit v1.2.1 From b92a5e23737172c52656a090977408a80d7f06d1 Mon Sep 17 00:00:00 2001 From: Max Vozeler Date: Wed, 12 Jan 2011 15:02:01 +0200 Subject: staging: usbip: vhci: give back URBs from in-flight unlink requests If we never received a RET_UNLINK because the TCP connection broke the pending URBs still need to be unlinked and given back. Previously processes would be stuck trying to kill the URB even after the device was detached. Signed-off-by: Max Vozeler Tested-by: Mark Wehby Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/vhci.h | 3 +++ drivers/staging/usbip/vhci_hcd.c | 24 +++++++++++++++++++++++- drivers/staging/usbip/vhci_rx.c | 15 +++++++++------ 3 files changed, 35 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/usbip/vhci.h b/drivers/staging/usbip/vhci.h index 41a1fe5138f4..2cfd00ec1164 100644 --- a/drivers/staging/usbip/vhci.h +++ b/drivers/staging/usbip/vhci.h @@ -119,6 +119,9 @@ void rh_port_disconnect(int rhport); void vhci_rx_loop(struct usbip_task *ut); void vhci_tx_loop(struct usbip_task *ut); +struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, + __u32 seqnum); + #define hardware (&the_controller->pdev.dev) static inline struct vhci_device *port_to_vdev(__u32 port) diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c index 5f1e2b0a628a..3a22f65b66d0 100644 --- a/drivers/staging/usbip/vhci_hcd.c +++ b/drivers/staging/usbip/vhci_hcd.c @@ -808,7 +808,6 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) return 0; } - static void vhci_device_unlink_cleanup(struct vhci_device *vdev) { struct vhci_unlink *unlink, *tmp; @@ -816,11 +815,34 @@ static void vhci_device_unlink_cleanup(struct vhci_device *vdev) spin_lock(&vdev->priv_lock); list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) { + usbip_uinfo("unlink cleanup tx %lu\n", unlink->unlink_seqnum); list_del(&unlink->list); kfree(unlink); } list_for_each_entry_safe(unlink, tmp, &vdev->unlink_rx, list) { + struct urb *urb; + + /* give back URB of unanswered unlink request */ + usbip_uinfo("unlink cleanup rx %lu\n", unlink->unlink_seqnum); + + urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum); + if (!urb) { + usbip_uinfo("the urb (seqnum %lu) was already given back\n", + unlink->unlink_seqnum); + list_del(&unlink->list); + kfree(unlink); + continue; + } + + urb->status = -ENODEV; + + spin_lock(&the_controller->lock); + usb_hcd_unlink_urb_from_ep(vhci_to_hcd(the_controller), urb); + spin_unlock(&the_controller->lock); + + usb_hcd_giveback_urb(vhci_to_hcd(the_controller), urb, urb->status); + list_del(&unlink->list); kfree(unlink); } diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c index 8147d7202b2d..bdbedd256903 100644 --- a/drivers/staging/usbip/vhci_rx.c +++ b/drivers/staging/usbip/vhci_rx.c @@ -23,16 +23,14 @@ #include "vhci.h" -/* get URB from transmitted urb queue */ -static struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, +/* get URB from transmitted urb queue. caller must hold vdev->priv_lock */ +struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, __u32 seqnum) { struct vhci_priv *priv, *tmp; struct urb *urb = NULL; int status; - spin_lock(&vdev->priv_lock); - list_for_each_entry_safe(priv, tmp, &vdev->priv_rx, list) { if (priv->seqnum == seqnum) { urb = priv->urb; @@ -63,8 +61,6 @@ static struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, } } - spin_unlock(&vdev->priv_lock); - return urb; } @@ -74,9 +70,11 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev, struct usbip_device *ud = &vdev->ud; struct urb *urb; + spin_lock(&vdev->priv_lock); urb = pickup_urb_and_free_priv(vdev, pdu->base.seqnum); + spin_unlock(&vdev->priv_lock); if (!urb) { usbip_uerr("cannot find a urb of seqnum %u\n", @@ -161,7 +159,12 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev, return; } + spin_lock(&vdev->priv_lock); + urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum); + + spin_unlock(&vdev->priv_lock); + if (!urb) { /* * I get the result of a unlink request. But, it seems that I -- cgit v1.2.1 From 6d212153a838354078cc7d96f9bb23b7d1fd3d1b Mon Sep 17 00:00:00 2001 From: Max Vozeler Date: Wed, 12 Jan 2011 15:02:02 +0200 Subject: staging: usbip: vhci: refuse to enqueue for dead connections There can be requests to enqueue URBs while we are shutting down a connection. Signed-off-by: Max Vozeler Tested-by: Mark Wehby Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/vhci_hcd.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c index 3a22f65b66d0..22b1ad9ebd56 100644 --- a/drivers/staging/usbip/vhci_hcd.c +++ b/drivers/staging/usbip/vhci_hcd.c @@ -559,6 +559,7 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, struct device *dev = &urb->dev->dev; int ret = 0; unsigned long flags; + struct vhci_device *vdev; usbip_dbg_vhci_hc("enter, usb_hcd %p urb %p mem_flags %d\n", hcd, urb, mem_flags); @@ -574,6 +575,18 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, return urb->status; } + vdev = port_to_vdev(the_controller->pending_port); + + /* refuse enqueue for dead connection */ + spin_lock(&vdev->ud.lock); + if (vdev->ud.status == VDEV_ST_NULL || vdev->ud.status == VDEV_ST_ERROR) { + usbip_uerr("enqueue for inactive port %d\n", vdev->rhport); + spin_unlock(&vdev->ud.lock); + spin_unlock_irqrestore(&the_controller->lock, flags); + return -ENODEV; + } + spin_unlock(&vdev->ud.lock); + ret = usb_hcd_link_urb_to_ep(hcd, urb); if (ret) goto no_need_unlink; @@ -592,8 +605,6 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, __u8 type = usb_pipetype(urb->pipe); struct usb_ctrlrequest *ctrlreq = (struct usb_ctrlrequest *) urb->setup_packet; - struct vhci_device *vdev = - port_to_vdev(the_controller->pending_port); if (type != PIPE_CONTROL || !ctrlreq) { dev_err(dev, "invalid request to devnum 0\n"); -- cgit v1.2.1 From 7e249c8b0737429bbf534515f81aded93504f449 Mon Sep 17 00:00:00 2001 From: Max Vozeler Date: Wed, 12 Jan 2011 15:02:03 +0200 Subject: staging: usbip: vhci: friendly log messages for connection errors Also changes the event on connection close to be VDEV_EVENT_DOWN - no functional change. Signed-off-by: Max Vozeler Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/vhci_rx.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c index bdbedd256903..ac15cea75396 100644 --- a/drivers/staging/usbip/vhci_rx.c +++ b/drivers/staging/usbip/vhci_rx.c @@ -205,11 +205,23 @@ static void vhci_rx_pdu(struct usbip_device *ud) memset(&pdu, 0, sizeof(pdu)); - /* 1. receive a pdu header */ ret = usbip_xmit(0, ud->tcp_socket, (char *) &pdu, sizeof(pdu), 0); + if (ret < 0) { + if (ret == -ECONNRESET) + usbip_uinfo("connection reset by peer\n"); + else if (ret != -ERESTARTSYS) + usbip_uinfo("xmit failed %d\n", ret); + usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); + return; + } + if (ret == 0) { + usbip_uinfo("connection closed"); + usbip_event_add(ud, VDEV_EVENT_DOWN); + return; + } if (ret != sizeof(pdu)) { - usbip_uerr("receiving pdu failed! size is %d, should be %d\n", + usbip_uerr("received pdu size is %d, should be %d\n", ret, (unsigned int)sizeof(pdu)); usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); return; -- cgit v1.2.1 From bd65f6233f6bc3233e7910752689fe3a45dc2e0c Mon Sep 17 00:00:00 2001 From: Max Vozeler Date: Wed, 12 Jan 2011 15:02:04 +0200 Subject: staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO If there is a receive timeout without any active requests, we can tell the connection was idle and ignore the timeout. If there are active requests for which we expect to receive a reply we close the connection. This makes it possible to set an upper bound on the time a usbip device may be unresponsive. This is a workaround for the lack of heart-beat messages in the USBIP protocol. Extending the protocol would break compatibility with all previous stub versions, so this seems like the lesser evil. Signed-off-by: Max Vozeler Tested-by: Mark Wehby Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/vhci_rx.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c index ac15cea75396..bf6991470941 100644 --- a/drivers/staging/usbip/vhci_rx.c +++ b/drivers/staging/usbip/vhci_rx.c @@ -193,6 +193,19 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev, return; } +static int vhci_priv_tx_empty(struct vhci_device *vdev) +{ + int empty = 0; + + spin_lock(&vdev->priv_lock); + + empty = list_empty(&vdev->priv_rx); + + spin_unlock(&vdev->priv_lock); + + return empty; +} + /* recv a pdu */ static void vhci_rx_pdu(struct usbip_device *ud) { @@ -210,8 +223,14 @@ static void vhci_rx_pdu(struct usbip_device *ud) if (ret < 0) { if (ret == -ECONNRESET) usbip_uinfo("connection reset by peer\n"); - else if (ret != -ERESTARTSYS) + else if (ret == -EAGAIN) { + /* ignore if connection was idle */ + if (vhci_priv_tx_empty(vdev)) + return; + usbip_uinfo("connection timed out with pending urbs\n"); + } else if (ret != -ERESTARTSYS) usbip_uinfo("xmit failed %d\n", ret); + usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); return; } -- cgit v1.2.1 From 01446ef5af4e8802369bf4d257806e24345a9371 Mon Sep 17 00:00:00 2001 From: Max Vozeler Date: Wed, 12 Jan 2011 15:02:05 +0200 Subject: staging: usbip: vhci: use urb->dev->portnum to find port The access to pending_port was racy when two devices were being attached at the same time. Signed-off-by: Max Vozeler Tested-by: Mark Wehby Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/vhci.h | 3 --- drivers/staging/usbip/vhci_hcd.c | 4 +--- 2 files changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/usbip/vhci.h b/drivers/staging/usbip/vhci.h index 2cfd00ec1164..afc3b1a71881 100644 --- a/drivers/staging/usbip/vhci.h +++ b/drivers/staging/usbip/vhci.h @@ -100,9 +100,6 @@ struct vhci_hcd { * But, the index of this array begins from 0. */ struct vhci_device vdev[VHCI_NPORTS]; - - /* vhci_device which has not been assiged its address yet */ - int pending_port; }; diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c index 22b1ad9ebd56..a35fe61268de 100644 --- a/drivers/staging/usbip/vhci_hcd.c +++ b/drivers/staging/usbip/vhci_hcd.c @@ -138,8 +138,6 @@ void rh_port_connect(int rhport, enum usb_device_speed speed) * the_controller->vdev[rhport].ud.status = VDEV_CONNECT; * spin_unlock(&the_controller->vdev[rhport].ud.lock); */ - the_controller->pending_port = rhport; - spin_unlock_irqrestore(&the_controller->lock, flags); usb_hcd_poll_rh_status(vhci_to_hcd(the_controller)); @@ -575,7 +573,7 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, return urb->status; } - vdev = port_to_vdev(the_controller->pending_port); + vdev = port_to_vdev(urb->dev->portnum-1); /* refuse enqueue for dead connection */ spin_lock(&vdev->ud.lock); -- cgit v1.2.1 From d7b9935a347ae954be907ea3d5eb4564ff124c53 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 20 Jan 2011 13:19:55 -0800 Subject: i915: Fix i915 suspend delay During system suspend, the "wait for ring buffer to empty" loop would always time out after three seconds, because the faster cached ring buffer head read would always return zero. Force the slow-and-careful PIO read on all but the first iterations of the loop to fix it. This also removes the unused (and useless) 'actual_head' variable that tried to approximate doing this, but did it incorrectly. Cc: Chris Wilson Cc: Rafael J. Wysocki Cc: Jesse Barnes Cc: Dave Airlie Cc: DRI mailing list Signed-off-by: Linus Torvalds --- drivers/gpu/drm/i915/intel_ringbuffer.c | 5 +++-- drivers/gpu/drm/i915/intel_ringbuffer.h | 1 - 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 03e337072517..f6b9baa6a63d 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -928,6 +928,7 @@ static int intel_wrap_ring_buffer(struct intel_ring_buffer *ring) int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n) { + int reread = 0; struct drm_device *dev = ring->dev; struct drm_i915_private *dev_priv = dev->dev_private; unsigned long end; @@ -940,9 +941,8 @@ int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n) * fallback to the slow and accurate path. */ head = intel_read_status_page(ring, 4); - if (head < ring->actual_head) + if (reread) head = I915_READ_HEAD(ring); - ring->actual_head = head; ring->head = head & HEAD_ADDR; ring->space = ring->head - (ring->tail + 8); if (ring->space < 0) @@ -961,6 +961,7 @@ int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n) msleep(1); if (atomic_read(&dev_priv->mm.wedged)) return -EAGAIN; + reread = 1; } while (!time_after(jiffies, end)); trace_i915_ring_wait_end (dev); return -EBUSY; diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h index be9087e4c9be..5b0abfa881fc 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.h +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h @@ -47,7 +47,6 @@ struct intel_ring_buffer { struct drm_device *dev; struct drm_i915_gem_object *obj; - u32 actual_head; u32 head; u32 tail; int space; -- cgit v1.2.1 From 6a3c869a6021f4abcd69aa5fbb15c63f69eb36fe Mon Sep 17 00:00:00 2001 From: Dimitris Michailidis Date: Wed, 19 Jan 2011 15:29:05 +0000 Subject: cxgb4: fix reported state of interfaces without link Currently tools like ip and ifconfig report incorrect state for cxgb4 interfaces that are up but do not have link and do so until first link establishment. This is because the initial netif_carrier_off call is before register_netdev and it needs to be after to be fully effective. Fix this by moving netif_carrier_off into .ndo_open. Signed-off-by: Dimitris Michailidis Signed-off-by: David S. Miller --- drivers/net/cxgb4/cxgb4_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/cxgb4/cxgb4_main.c b/drivers/net/cxgb4/cxgb4_main.c index 059c1eec8c3f..ec35d458102c 100644 --- a/drivers/net/cxgb4/cxgb4_main.c +++ b/drivers/net/cxgb4/cxgb4_main.c @@ -2710,6 +2710,8 @@ static int cxgb_open(struct net_device *dev) struct port_info *pi = netdev_priv(dev); struct adapter *adapter = pi->adapter; + netif_carrier_off(dev); + if (!(adapter->flags & FULL_INIT_DONE)) { err = cxgb_up(adapter); if (err < 0) @@ -3661,7 +3663,6 @@ static int __devinit init_one(struct pci_dev *pdev, pi->xact_addr_filt = -1; pi->rx_offload = RX_CSO; pi->port_id = i; - netif_carrier_off(netdev); netdev->irq = pdev->irq; netdev->features |= NETIF_F_SG | TSO_FLAGS; -- cgit v1.2.1 From b30532515f0a62bfe17207ab00883dd262497006 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Thu, 20 Jan 2011 09:02:31 +0000 Subject: bonding: Ensure that we unshare skbs prior to calling pskb_may_pull Recently reported oops: kernel BUG at net/core/skbuff.c:813! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/net/bond0/broadcast CPU 8 Modules linked in: sit tunnel4 cpufreq_ondemand acpi_cpufreq freq_table bonding ipv6 dm_mirror dm_region_hash dm_log cdc_ether usbnet mii serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support shpchp ioatdma i7core_edac edac_core bnx2 ixgbe dca mdio sg ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase scsi_transport_sas dm_mod [last unloaded: microcode] Modules linked in: sit tunnel4 cpufreq_ondemand acpi_cpufreq freq_table bonding ipv6 dm_mirror dm_region_hash dm_log cdc_ether usbnet mii serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support shpchp ioatdma i7core_edac edac_core bnx2 ixgbe dca mdio sg ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase scsi_transport_sas dm_mod [last unloaded: microcode] Pid: 0, comm: swapper Not tainted 2.6.32-71.el6.x86_64 #1 BladeCenter HS22 -[7870AC1]- RIP: 0010:[] [] pskb_expand_head+0x36/0x1e0 RSP: 0018:ffff880028303b70 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff880c6458ec80 RCX: 0000000000000020 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880c6458ec80 RBP: ffff880028303bc0 R08: ffffffff818a6180 R09: ffff880c6458ed64 R10: ffff880c622b36c0 R11: 0000000000000400 R12: 0000000000000000 R13: 0000000000000180 R14: ffff880c622b3000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880028300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000038653452a4 CR3: 0000000001001000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff8806649c2000, task ffff880c64f16ab0) Stack: ffff880028303bc0 ffffffff8104fff9 000000000000001c 0000000100000000 <0> ffff880000047d80 ffff880c6458ec80 000000000000001c ffff880c6223da00 <0> ffff880c622b3000 0000000000000000 ffff880028303c10 ffffffff81407f7a Call Trace: [] ? __wake_up_common+0x59/0x90 [] __pskb_pull_tail+0x2aa/0x360 [] bond_arp_rcv+0x2c0/0x2e0 [bonding] [] ? packet_rcv+0x377/0x440 [] netif_receive_skb+0x2db/0x670 [] napi_skb_finish+0x58/0x70 [] napi_gro_receive+0x39/0x50 [] ixgbe_clean_rx_irq+0x35b/0x900 [ixgbe] [] ixgbe_clean_rxtx_many+0x136/0x240 [ixgbe] [] net_rx_action+0x103/0x210 [] __do_softirq+0xb7/0x1e0 [] ? handle_IRQ_event+0x60/0x170 [] call_softirq+0x1c/0x30 [] do_softirq+0x65/0xa0 [] irq_exit+0x85/0x90 [] do_IRQ+0x75/0xf0 [] ret_from_intr+0x0/0x11 [] ? mwait_idle+0x71/0xd0 [] ? atomic_notifier_call_chain+0x1a/0x20 [] cpu_idle+0xb6/0x110 [] start_secondary+0x1fc/0x23f Resulted from bonding driver registering packet handlers via dev_add_pack and then trying to call pskb_may_pull. If another packet handler (like for AF_PACKET sockets) gets called first, the delivered skb will have a user count > 1, which causes pskb_may_pull to BUG halt when it does its skb_shared check. Fix this by calling skb_share_check prior to the may_pull call sites in the bonding driver to clone the skb when needed. Tested by myself and the reported successfully. Signed-off-by: Neil Horman CC: Andy Gospodarek CC: Jay Vosburgh CC: "David S. Miller" Signed-off-by: Jay Vosburgh Signed-off-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 4 ++++ drivers/net/bonding/bond_alb.c | 4 ++++ drivers/net/bonding/bond_main.c | 4 ++++ 3 files changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 48cf24ff4e6f..c91874d25e54 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -2470,6 +2470,10 @@ int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct pac if (!(dev->flags & IFF_MASTER)) goto out; + skb = skb_share_check(skb, GFP_ATOMIC); + if (!skb) + goto out; + if (!pskb_may_pull(skb, sizeof(struct lacpdu))) goto out; diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index f4e638c65129..5c6fba802f2b 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -326,6 +326,10 @@ static int rlb_arp_recv(struct sk_buff *skb, struct net_device *bond_dev, struct goto out; } + skb = skb_share_check(skb, GFP_ATOMIC); + if (!skb) + goto out; + if (!pskb_may_pull(skb, arp_hdr_len(bond_dev))) goto out; diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index b1025b85acf1..163e0b06eaa5 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2733,6 +2733,10 @@ static int bond_arp_rcv(struct sk_buff *skb, struct net_device *dev, struct pack if (!slave || !slave_do_arp_validate(bond, slave)) goto out_unlock; + skb = skb_share_check(skb, GFP_ATOMIC); + if (!skb) + goto out_unlock; + if (!pskb_may_pull(skb, arp_hdr_len(dev))) goto out_unlock; -- cgit v1.2.1 From 6a108a14fa356ef607be308b68337939e56ea94e Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 20 Jan 2011 14:44:16 -0800 Subject: kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar Acked-by: David Woodhouse Signed-off-by: David Rientjes Cc: Greg KH Cc: "David S. Miller" Cc: Jens Axboe Cc: Arnd Bergmann Cc: Robin Holt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/Kconfig | 2 +- drivers/ata/Kconfig | 2 +- drivers/base/Kconfig | 2 +- drivers/char/Kconfig | 10 +++--- drivers/cpufreq/Kconfig | 2 +- drivers/firmware/Kconfig | 2 +- drivers/gpu/drm/Kconfig | 2 +- drivers/gpu/drm/drm_fb_helper.c | 4 +-- drivers/gpu/drm/nouveau/Kconfig | 2 +- drivers/gpu/vga/Kconfig | 2 +- drivers/hid/Kconfig | 64 ++++++++++++++++++------------------ drivers/hid/usbhid/Kconfig | 2 +- drivers/ide/Kconfig | 2 +- drivers/infiniband/hw/mthca/Kconfig | 2 +- drivers/infiniband/ulp/ipoib/Kconfig | 2 +- drivers/input/Kconfig | 6 ++-- drivers/input/keyboard/Kconfig | 4 +-- drivers/input/mouse/Kconfig | 10 +++--- drivers/input/serio/Kconfig | 6 ++-- drivers/input/touchscreen/Kconfig | 30 ++++++++--------- drivers/media/common/tuners/Kconfig | 2 +- drivers/media/dvb/frontends/Kconfig | 2 +- drivers/media/video/Kconfig | 2 +- drivers/net/Kconfig | 2 +- drivers/pci/pcie/Kconfig | 2 +- drivers/pcmcia/Kconfig | 12 +++---- drivers/serial/Kconfig | 4 +-- drivers/ssb/Kconfig | 2 +- drivers/usb/core/Kconfig | 6 ++-- drivers/video/Kconfig | 2 +- drivers/video/console/Kconfig | 2 +- 31 files changed, 98 insertions(+), 98 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 10c7ad59c0e1..2aa042a5da6d 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -318,7 +318,7 @@ config ACPI_PCI_SLOT the module will be called pci_slot. config X86_PM_TIMER - bool "Power Management Timer Support" if EMBEDDED + bool "Power Management Timer Support" if EXPERT depends on X86 default y help diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index c6b298d4c136..c2328aed0836 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -783,7 +783,7 @@ config PATA_PCMCIA config PATA_PLATFORM tristate "Generic platform device PATA support" - depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM + depends on EXPERT || PPC || HAVE_PATA_PLATFORM help This option enables support for generic directly connected ATA devices commonly found on embedded systems. diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig index fd96345bc35c..d57e8d0fb823 100644 --- a/drivers/base/Kconfig +++ b/drivers/base/Kconfig @@ -70,7 +70,7 @@ config PREVENT_FIRMWARE_BUILD If unsure say Y here. config FW_LOADER - tristate "Userspace firmware loading support" if EMBEDDED + tristate "Userspace firmware loading support" if EXPERT default y ---help--- This option is provided for the case where no in-kernel-tree modules diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 0f175a866ef0..4237602fd4cd 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -5,7 +5,7 @@ menu "Character devices" config VT - bool "Virtual terminal" if EMBEDDED + bool "Virtual terminal" if EXPERT depends on !S390 select INPUT default y @@ -39,13 +39,13 @@ config VT config CONSOLE_TRANSLATIONS depends on VT default y - bool "Enable character translations in console" if EMBEDDED + bool "Enable character translations in console" if EXPERT ---help--- This enables support for font mapping and Unicode translation on virtual consoles. config VT_CONSOLE - bool "Support for console on virtual terminal" if EMBEDDED + bool "Support for console on virtual terminal" if EXPERT depends on VT default y ---help--- @@ -429,7 +429,7 @@ config SGI_MBCS source "drivers/serial/Kconfig" config UNIX98_PTYS - bool "Unix98 PTY support" if EMBEDDED + bool "Unix98 PTY support" if EXPERT default y ---help--- A pseudo terminal (PTY) is a software device consisting of two @@ -495,7 +495,7 @@ config LEGACY_PTY_COUNT config TTY_PRINTK bool "TTY driver to output user messages via printk" - depends on EMBEDDED + depends on EXPERT default n ---help--- If you say Y here, the support for writing user messages (i.e. diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index a8c8d9c19d74..ca8ee8093d6c 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -71,7 +71,7 @@ config CPU_FREQ_DEFAULT_GOV_PERFORMANCE config CPU_FREQ_DEFAULT_GOV_POWERSAVE bool "powersave" - depends on EMBEDDED + depends on EXPERT select CPU_FREQ_GOV_POWERSAVE help Use the CPUFreq governor 'powersave' as default. This sets diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index e8b6a13515bd..e710424b59ea 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -27,7 +27,7 @@ config EDD_OFF using the kernel parameter 'edd={on|skipmbr|off}'. config FIRMWARE_MEMMAP - bool "Add firmware-provided memory map to sysfs" if EMBEDDED + bool "Add firmware-provided memory map to sysfs" if EXPERT default X86 help Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap. diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 64828a7db77b..bea966f8ac84 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -23,7 +23,7 @@ config DRM_KMS_HELPER tristate depends on DRM select FB - select FRAMEBUFFER_CONSOLE if !EMBEDDED + select FRAMEBUFFER_CONSOLE if !EXPERT help FB and CRTC helpers for KMS drivers. diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 5c4f9b9ecdc0..6977a1ce9d98 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -1533,11 +1533,11 @@ bool drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper) } EXPORT_SYMBOL(drm_fb_helper_hotplug_event); -/* The Kconfig DRM_KMS_HELPER selects FRAMEBUFFER_CONSOLE (if !EMBEDDED) +/* The Kconfig DRM_KMS_HELPER selects FRAMEBUFFER_CONSOLE (if !EXPERT) * but the module doesn't depend on any fb console symbols. At least * attempt to load fbcon to avoid leaving the system without a usable console. */ -#if defined(CONFIG_FRAMEBUFFER_CONSOLE_MODULE) && !defined(CONFIG_EMBEDDED) +#if defined(CONFIG_FRAMEBUFFER_CONSOLE_MODULE) && !defined(CONFIG_EXPERT) static int __init drm_fb_helper_modinit(void) { const char *name = "fbcon"; diff --git a/drivers/gpu/drm/nouveau/Kconfig b/drivers/gpu/drm/nouveau/Kconfig index 21d6c29c2d21..de70959b9ed5 100644 --- a/drivers/gpu/drm/nouveau/Kconfig +++ b/drivers/gpu/drm/nouveau/Kconfig @@ -8,7 +8,7 @@ config DRM_NOUVEAU select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB - select FRAMEBUFFER_CONSOLE if !EMBEDDED + select FRAMEBUFFER_CONSOLE if !EXPERT select FB_BACKLIGHT if DRM_NOUVEAU_BACKLIGHT select ACPI_VIDEO if ACPI && X86 && BACKLIGHT_CLASS_DEVICE && VIDEO_OUTPUT_CONTROL && INPUT help diff --git a/drivers/gpu/vga/Kconfig b/drivers/gpu/vga/Kconfig index 8d0e31a22027..96c83a9a76bb 100644 --- a/drivers/gpu/vga/Kconfig +++ b/drivers/gpu/vga/Kconfig @@ -1,5 +1,5 @@ config VGA_ARB - bool "VGA Arbitration" if EMBEDDED + bool "VGA Arbitration" if EXPERT default y depends on PCI help diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 24cca2f69dfc..2560f01c1a63 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -62,9 +62,9 @@ config HID_3M_PCT Support for 3M PCT touch screens. config HID_A4TECH - tristate "A4 tech mice" if EMBEDDED + tristate "A4 tech mice" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for A4 tech X5 and WOP-35 / Trust 450L mice. @@ -77,9 +77,9 @@ config HID_ACRUX_FF game controllers. config HID_APPLE - tristate "Apple {i,Power,Mac}Books" if EMBEDDED + tristate "Apple {i,Power,Mac}Books" if EXPERT depends on (USB_HID || BT_HIDP) - default !EMBEDDED + default !EXPERT ---help--- Support for some Apple devices which less or more break HID specification. @@ -88,9 +88,9 @@ config HID_APPLE MacBooks, MacBook Pros and Apple Aluminum. config HID_BELKIN - tristate "Belkin Flip KVM and Wireless keyboard" if EMBEDDED + tristate "Belkin Flip KVM and Wireless keyboard" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Belkin Flip KVM and Wireless keyboard. @@ -101,16 +101,16 @@ config HID_CANDO Support for Cando dual touch panel. config HID_CHERRY - tristate "Cherry Cymotion keyboard" if EMBEDDED + tristate "Cherry Cymotion keyboard" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Cherry Cymotion keyboard. config HID_CHICONY - tristate "Chicony Tactical pad" if EMBEDDED + tristate "Chicony Tactical pad" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Chicony Tactical pad. @@ -130,9 +130,9 @@ config HID_PRODIKEYS and some additional multimedia keys. config HID_CYPRESS - tristate "Cypress mouse and barcode readers" if EMBEDDED + tristate "Cypress mouse and barcode readers" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for cypress mouse and barcode readers. @@ -174,16 +174,16 @@ config HID_ELECOM Support for the ELECOM BM084 (bluetooth mouse). config HID_EZKEY - tristate "Ezkey BTC 8193 keyboard" if EMBEDDED + tristate "Ezkey BTC 8193 keyboard" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Ezkey BTC 8193 keyboard. config HID_KYE - tristate "Kye/Genius Ergo Mouse" if EMBEDDED + tristate "Kye/Genius Ergo Mouse" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Kye/Genius Ergo Mouse. @@ -212,16 +212,16 @@ config HID_TWINHAN Support for Twinhan IR remote control. config HID_KENSINGTON - tristate "Kensington Slimblade Trackball" if EMBEDDED + tristate "Kensington Slimblade Trackball" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Kensington Slimblade Trackball. config HID_LOGITECH - tristate "Logitech devices" if EMBEDDED + tristate "Logitech devices" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Logitech devices that are not fully compliant with HID standard. @@ -276,9 +276,9 @@ config HID_MAGICMOUSE Apple Wireless "Magic" Mouse. config HID_MICROSOFT - tristate "Microsoft non-fully HID-compliant devices" if EMBEDDED + tristate "Microsoft non-fully HID-compliant devices" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Microsoft devices that are not fully compliant with HID standard. @@ -289,9 +289,9 @@ config HID_MOSART Support for MosArt dual-touch panels. config HID_MONTEREY - tristate "Monterey Genius KB29E keyboard" if EMBEDDED + tristate "Monterey Genius KB29E keyboard" if EXPERT depends on USB_HID - default !EMBEDDED + default !EXPERT ---help--- Support for Monterey Genius KB29E. @@ -365,8 +365,8 @@ config HID_PICOLCD - IR config HID_PICOLCD_FB - bool "Framebuffer support" if EMBEDDED - default !EMBEDDED + bool "Framebuffer support" if EXPERT + default !EXPERT depends on HID_PICOLCD depends on HID_PICOLCD=FB || FB=y select FB_DEFERRED_IO @@ -379,8 +379,8 @@ config HID_PICOLCD_FB frambuffer device. config HID_PICOLCD_BACKLIGHT - bool "Backlight control" if EMBEDDED - default !EMBEDDED + bool "Backlight control" if EXPERT + default !EXPERT depends on HID_PICOLCD depends on HID_PICOLCD=BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=y ---help--- @@ -388,16 +388,16 @@ config HID_PICOLCD_BACKLIGHT class. config HID_PICOLCD_LCD - bool "Contrast control" if EMBEDDED - default !EMBEDDED + bool "Contrast control" if EXPERT + default !EXPERT depends on HID_PICOLCD depends on HID_PICOLCD=LCD_CLASS_DEVICE || LCD_CLASS_DEVICE=y ---help--- Provide access to PicoLCD's LCD contrast via lcd class. config HID_PICOLCD_LEDS - bool "GPO via leds class" if EMBEDDED - default !EMBEDDED + bool "GPO via leds class" if EXPERT + default !EXPERT depends on HID_PICOLCD depends on HID_PICOLCD=LEDS_CLASS || LEDS_CLASS=y ---help--- diff --git a/drivers/hid/usbhid/Kconfig b/drivers/hid/usbhid/Kconfig index 4edb3bef94a6..0f20fd17cf06 100644 --- a/drivers/hid/usbhid/Kconfig +++ b/drivers/hid/usbhid/Kconfig @@ -45,7 +45,7 @@ config USB_HIDDEV If unsure, say Y. menu "USB HID Boot Protocol drivers" - depends on USB!=n && USB_HID!=y && EMBEDDED + depends on USB!=n && USB_HID!=y && EXPERT config USB_KBD tristate "USB HIDBP Keyboard (simple Boot) support" diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 98ccfeb3f5aa..9827c5e686cb 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -134,7 +134,7 @@ config BLK_DEV_IDECD module will be called ide-cd. config BLK_DEV_IDECD_VERBOSE_ERRORS - bool "Verbose error logging for IDE/ATAPI CDROM driver" if EMBEDDED + bool "Verbose error logging for IDE/ATAPI CDROM driver" if EXPERT depends on BLK_DEV_IDECD default y help diff --git a/drivers/infiniband/hw/mthca/Kconfig b/drivers/infiniband/hw/mthca/Kconfig index 03efc074967e..da314c3fec23 100644 --- a/drivers/infiniband/hw/mthca/Kconfig +++ b/drivers/infiniband/hw/mthca/Kconfig @@ -7,7 +7,7 @@ config INFINIBAND_MTHCA ("Tavor") and the MT25208 PCI Express HCA ("Arbel"). config INFINIBAND_MTHCA_DEBUG - bool "Verbose debugging output" if EMBEDDED + bool "Verbose debugging output" if EXPERT depends on INFINIBAND_MTHCA default y ---help--- diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig index 55855eeabae7..cda8eac55fff 100644 --- a/drivers/infiniband/ulp/ipoib/Kconfig +++ b/drivers/infiniband/ulp/ipoib/Kconfig @@ -24,7 +24,7 @@ config INFINIBAND_IPOIB_CM unless you limit mtu for these destinations to 2044. config INFINIBAND_IPOIB_DEBUG - bool "IP-over-InfiniBand debugging" if EMBEDDED + bool "IP-over-InfiniBand debugging" if EXPERT depends on INFINIBAND_IPOIB default y ---help--- diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index 07c2cd43109c..1903c0f5b925 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -6,7 +6,7 @@ menu "Input device support" depends on !S390 config INPUT - tristate "Generic input layer (needed for keyboard, mouse, ...)" if EMBEDDED + tristate "Generic input layer (needed for keyboard, mouse, ...)" if EXPERT default y help Say Y here if you have any input device (mouse, keyboard, tablet, @@ -67,7 +67,7 @@ config INPUT_SPARSEKMAP comment "Userland interfaces" config INPUT_MOUSEDEV - tristate "Mouse interface" if EMBEDDED + tristate "Mouse interface" if EXPERT default y help Say Y here if you want your mouse to be accessible as char devices @@ -150,7 +150,7 @@ config INPUT_EVBUG module will be called evbug. config INPUT_APMPOWER - tristate "Input Power Event -> APM Bridge" if EMBEDDED + tristate "Input Power Event -> APM Bridge" if EXPERT depends on INPUT && APM_EMULATION help Say Y here if you want suspend key events to trigger a user diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 7b3c0b8fa432..417507348bab 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -2,7 +2,7 @@ # Input core configuration # menuconfig INPUT_KEYBOARD - bool "Keyboards" if EMBEDDED || !X86 + bool "Keyboards" if EXPERT || !X86 default y help Say Y here, and a list of supported keyboards will be displayed. @@ -57,7 +57,7 @@ config KEYBOARD_ATARI module will be called atakbd. config KEYBOARD_ATKBD - tristate "AT keyboard" if EMBEDDED || !X86 + tristate "AT keyboard" if EXPERT || !X86 default y select SERIO select SERIO_LIBPS2 diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index bf5fd7f6a313..9c1e6ee83531 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -39,7 +39,7 @@ config MOUSE_PS2 module will be called psmouse. config MOUSE_PS2_ALPS - bool "ALPS PS/2 mouse protocol extension" if EMBEDDED + bool "ALPS PS/2 mouse protocol extension" if EXPERT default y depends on MOUSE_PS2 help @@ -49,7 +49,7 @@ config MOUSE_PS2_ALPS If unsure, say Y. config MOUSE_PS2_LOGIPS2PP - bool "Logitech PS/2++ mouse protocol extension" if EMBEDDED + bool "Logitech PS/2++ mouse protocol extension" if EXPERT default y depends on MOUSE_PS2 help @@ -59,7 +59,7 @@ config MOUSE_PS2_LOGIPS2PP If unsure, say Y. config MOUSE_PS2_SYNAPTICS - bool "Synaptics PS/2 mouse protocol extension" if EMBEDDED + bool "Synaptics PS/2 mouse protocol extension" if EXPERT default y depends on MOUSE_PS2 help @@ -69,7 +69,7 @@ config MOUSE_PS2_SYNAPTICS If unsure, say Y. config MOUSE_PS2_LIFEBOOK - bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EMBEDDED + bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EXPERT default y depends on MOUSE_PS2 && X86 && DMI help @@ -79,7 +79,7 @@ config MOUSE_PS2_LIFEBOOK If unsure, say Y. config MOUSE_PS2_TRACKPOINT - bool "IBM Trackpoint PS/2 mouse protocol extension" if EMBEDDED + bool "IBM Trackpoint PS/2 mouse protocol extension" if EXPERT default y depends on MOUSE_PS2 help diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 307eef77a172..55f2c2293ec6 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -2,7 +2,7 @@ # Input core configuration # config SERIO - tristate "Serial I/O support" if EMBEDDED || !X86 + tristate "Serial I/O support" if EXPERT || !X86 default y help Say Yes here if you have any input device that uses serial I/O to @@ -19,7 +19,7 @@ config SERIO if SERIO config SERIO_I8042 - tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86 + tristate "i8042 PC Keyboard controller" if EXPERT || !X86 default y depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \ (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN @@ -168,7 +168,7 @@ config SERIO_MACEPS2 module will be called maceps2. config SERIO_LIBPS2 - tristate "PS/2 driver library" if EMBEDDED + tristate "PS/2 driver library" if EXPERT depends on SERIO_I8042 || SERIO_I8042=n help Say Y here if you are using a driver for device connected diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 0c9f4b158ff0..61834ae282e1 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -540,62 +540,62 @@ config TOUCHSCREEN_MC13783 config TOUCHSCREEN_USB_EGALAX default y - bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED + bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_PANJIT default y - bool "PanJit device support" if EMBEDDED + bool "PanJit device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_3M default y - bool "3M/Microtouch EX II series device support" if EMBEDDED + bool "3M/Microtouch EX II series device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_ITM default y - bool "ITM device support" if EMBEDDED + bool "ITM device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_ETURBO default y - bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED + bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_GUNZE default y - bool "Gunze AHL61 device support" if EMBEDDED + bool "Gunze AHL61 device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_DMC_TSC10 default y - bool "DMC TSC-10/25 device support" if EMBEDDED + bool "DMC TSC-10/25 device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_IRTOUCH default y - bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED + bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_IDEALTEK default y - bool "IdealTEK URTC1000 device support" if EMBEDDED + bool "IdealTEK URTC1000 device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_GENERAL_TOUCH default y - bool "GeneralTouch Touchscreen device support" if EMBEDDED + bool "GeneralTouch Touchscreen device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_GOTOP default y - bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED + bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_JASTEC default y - bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED + bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_E2I @@ -605,17 +605,17 @@ config TOUCHSCREEN_USB_E2I config TOUCHSCREEN_USB_ZYTRONIC default y - bool "Zytronic controller" if EMBEDDED + bool "Zytronic controller" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_ETT_TC45USB default y - bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EMBEDDED + bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_USB_NEXIO default y - bool "NEXIO/iNexio device support" if EMBEDDED + bool "NEXIO/iNexio device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE config TOUCHSCREEN_TOUCHIT213 diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig index 78b089526e02..6fc79f15dcbc 100644 --- a/drivers/media/common/tuners/Kconfig +++ b/drivers/media/common/tuners/Kconfig @@ -34,7 +34,7 @@ config MEDIA_TUNER config MEDIA_TUNER_CUSTOMISE bool "Customize analog and hybrid tuner modules to build" depends on MEDIA_TUNER - default y if EMBEDDED + default y if EXPERT help This allows the user to deselect tuner drivers unnecessary for their hardware from the build. Use this option with care diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index ef3e43a03199..b8519ba511e5 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -1,7 +1,7 @@ config DVB_FE_CUSTOMISE bool "Customise the frontend modules to build" depends on DVB_CORE - default y if EMBEDDED + default y if EXPERT help This allows the user to select/deselect frontend drivers for their hardware from the build. diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index eb875af05e79..34e7abadceaa 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -78,7 +78,7 @@ config VIDEO_FIXED_MINOR_RANGES config VIDEO_HELPER_CHIPS_AUTO bool "Autoselect pertinent encoders/decoders and other helper chips" - default y if !EMBEDDED + default y if !EXPERT ---help--- Most video cards may require additional modules to encode or decode audio/video standards. This option will autoselect diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 16fe4f9b719b..03823327db25 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2864,7 +2864,7 @@ config MLX4_CORE default n config MLX4_DEBUG - bool "Verbose debugging output" if (MLX4_CORE && EMBEDDED) + bool "Verbose debugging output" if (MLX4_CORE && EXPERT) depends on MLX4_CORE default y ---help--- diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig index dda70981b7a6..dc29348264c6 100644 --- a/drivers/pci/pcie/Kconfig +++ b/drivers/pci/pcie/Kconfig @@ -31,7 +31,7 @@ source "drivers/pci/pcie/aer/Kconfig" # PCI Express ASPM # config PCIEASPM - bool "PCI Express ASPM control" if EMBEDDED + bool "PCI Express ASPM control" if EXPERT depends on PCI && PCIEPORTBUS default y help diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index de886f3dfd39..6e318ce41136 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -69,7 +69,7 @@ comment "PC-card bridges" config YENTA tristate "CardBus yenta-compatible bridge support" depends on PCI - select CARDBUS if !EMBEDDED + select CARDBUS if !EXPERT select PCCARD_NONSTATIC if PCMCIA != n ---help--- This option enables support for CardBus host bridges. Virtually @@ -84,27 +84,27 @@ config YENTA config YENTA_O2 default y - bool "Special initialization for O2Micro bridges" if EMBEDDED + bool "Special initialization for O2Micro bridges" if EXPERT depends on YENTA config YENTA_RICOH default y - bool "Special initialization for Ricoh bridges" if EMBEDDED + bool "Special initialization for Ricoh bridges" if EXPERT depends on YENTA config YENTA_TI default y - bool "Special initialization for TI and EnE bridges" if EMBEDDED + bool "Special initialization for TI and EnE bridges" if EXPERT depends on YENTA config YENTA_ENE_TUNE default y - bool "Auto-tune EnE bridges for CB cards" if EMBEDDED + bool "Auto-tune EnE bridges for CB cards" if EXPERT depends on YENTA_TI && CARDBUS config YENTA_TOSHIBA default y - bool "Special initialization for Toshiba ToPIC bridges" if EMBEDDED + bool "Special initialization for Toshiba ToPIC bridges" if EXPERT depends on YENTA config PD6729 diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index c1df7676a73d..b1682d7f1d8a 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -81,7 +81,7 @@ config SERIAL_8250_GSC default SERIAL_8250 config SERIAL_8250_PCI - tristate "8250/16550 PCI device support" if EMBEDDED + tristate "8250/16550 PCI device support" if EXPERT depends on SERIAL_8250 && PCI default SERIAL_8250 help @@ -90,7 +90,7 @@ config SERIAL_8250_PCI Saves about 9K. config SERIAL_8250_PNP - tristate "8250/16550 PNP device support" if EMBEDDED + tristate "8250/16550 PNP device support" if EXPERT depends on SERIAL_8250 && PNP default SERIAL_8250 help diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig index 2d8cc455dbc7..42cdaa9a4d8a 100644 --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig @@ -82,7 +82,7 @@ config SSB_SDIOHOST config SSB_SILENT bool "No SSB kernel messages" - depends on SSB && EMBEDDED + depends on SSB && EXPERT help This option turns off all Sonics Silicon Backplane printks. Note that you won't be able to identify problems, once diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index bcc24779ba0e..18d02e32a3d5 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -123,9 +123,9 @@ config USB_OTG config USB_OTG_WHITELIST bool "Rely on OTG Targeted Peripherals List" - depends on USB_OTG || EMBEDDED + depends on USB_OTG || EXPERT default y if USB_OTG - default n if EMBEDDED + default n if EXPERT help If you say Y here, the "otg_whitelist.h" file will be used as a product whitelist, so USB peripherals not listed there will be @@ -141,7 +141,7 @@ config USB_OTG_WHITELIST config USB_OTG_BLACKLIST_HUB bool "Disable external hubs" - depends on USB_OTG || EMBEDDED + depends on USB_OTG || EXPERT help If you say Y here, then Linux will refuse to enumerate external hubs. OTG hosts are allowed to reduce hardware diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index d916ac04abab..6bafb51bb437 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1227,7 +1227,7 @@ config FB_CARILLO_RANCH config FB_INTEL tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)" - depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EMBEDDED + depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EXPERT select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index 5a35f22372b9..2209e354f531 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -5,7 +5,7 @@ menu "Console display driver support" config VGA_CONSOLE - bool "VGA text console" if EMBEDDED || !X86 + bool "VGA text console" if EXPERT || !X86 depends on !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !SUPERH && !BLACKFIN && !AVR32 && !MN10300 && (!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) default y help -- cgit v1.2.1 From cc587ece12791d001095488bf060fac52f657ea9 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 20 Jan 2011 14:44:29 -0800 Subject: drivers/leds/ledtrig-gpio.c: make output match input, tighten input checking Replicate changes made to drivers/leds/ledtrig-backlight.c. Cc: Paul Mundt Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/ledtrig-gpio.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/leds/ledtrig-gpio.c b/drivers/leds/ledtrig-gpio.c index 991d93be0f44..ecc4bf3f37a9 100644 --- a/drivers/leds/ledtrig-gpio.c +++ b/drivers/leds/ledtrig-gpio.c @@ -99,7 +99,7 @@ static ssize_t gpio_trig_inverted_show(struct device *dev, struct led_classdev *led = dev_get_drvdata(dev); struct gpio_trig_data *gpio_data = led->trigger_data; - return sprintf(buf, "%s\n", gpio_data->inverted ? "yes" : "no"); + return sprintf(buf, "%u\n", gpio_data->inverted); } static ssize_t gpio_trig_inverted_store(struct device *dev, @@ -107,16 +107,17 @@ static ssize_t gpio_trig_inverted_store(struct device *dev, { struct led_classdev *led = dev_get_drvdata(dev); struct gpio_trig_data *gpio_data = led->trigger_data; - unsigned inverted; + unsigned long inverted; int ret; - ret = sscanf(buf, "%u", &inverted); - if (ret < 1) { - dev_err(dev, "invalid value\n"); + ret = strict_strtoul(buf, 10, &inverted); + if (ret < 0) + return ret; + + if (inverted > 1) return -EINVAL; - } - gpio_data->inverted = !!inverted; + gpio_data->inverted = inverted; /* After inverting, we need to update the LED. */ schedule_work(&gpio_data->work); -- cgit v1.2.1 From 2550326ac7a062fdfc204f9a3b98bdb9179638fc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 20 Jan 2011 14:44:31 -0800 Subject: backlight: fix 88pm860x_bl macro collision Fix collision with kernel-supplied #define: drivers/video/backlight/88pm860x_bl.c:24:1: warning: "CURRENT_MASK" redefined arch/x86/include/asm/page_64_types.h:6:1: warning: this is the location of the previous definition Signed-off-by: Randy Dunlap Cc: Haojian Zhuang Cc: Richard Purdie Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/backlight/88pm860x_bl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c index c789c46e38af..b224396b86d5 100644 --- a/drivers/video/backlight/88pm860x_bl.c +++ b/drivers/video/backlight/88pm860x_bl.c @@ -21,7 +21,7 @@ #define MAX_BRIGHTNESS (0xFF) #define MIN_BRIGHTNESS (0) -#define CURRENT_MASK (0x1F << 1) +#define CURRENT_BITMASK (0x1F << 1) struct pm860x_backlight_data { struct pm860x_chip *chip; @@ -85,7 +85,7 @@ static int pm860x_backlight_set(struct backlight_device *bl, int brightness) if ((data->current_brightness == 0) && brightness) { if (data->iset) { ret = pm860x_set_bits(data->i2c, wled_idc(data->port), - CURRENT_MASK, data->iset); + CURRENT_BITMASK, data->iset); if (ret < 0) goto out; } -- cgit v1.2.1 From 2d6d9fd3a54a28c6f67f26eb6c74803307a1b11e Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 19 Jan 2011 22:27:14 +0100 Subject: ACPI: Introduce acpi_os_ioremap() Commit ca9b600be38c ("ACPI / PM: Make suspend_nvs_save() use acpi_os_map_memory()") attempted to prevent the code in osl.c and nvs.c from using different ioremap() variants by making the latter use acpi_os_map_memory() for mapping the NVS pages. However, that also requires acpi_os_unmap_memory() to be used for unmapping them, which causes synchronize_rcu() to be executed many times in a row unnecessarily and introduces substantial delays during resume on some systems. Instead of using acpi_os_map_memory() for mapping the NVS pages in nvs.c introduce acpi_os_ioremap() calling ioremap_cache() and make the code in both osl.c and nvs.c use it. Reported-by: Jeff Chua Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- drivers/acpi/nvs.c | 7 ++++--- drivers/acpi/osl.c | 12 +++++++----- 2 files changed, 11 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/nvs.c b/drivers/acpi/nvs.c index 54b6ab8040a6..fa5a1df42b79 100644 --- a/drivers/acpi/nvs.c +++ b/drivers/acpi/nvs.c @@ -12,6 +12,7 @@ #include #include #include +#include #include /* @@ -80,7 +81,7 @@ void suspend_nvs_free(void) free_page((unsigned long)entry->data); entry->data = NULL; if (entry->kaddr) { - acpi_os_unmap_memory(entry->kaddr, entry->size); + iounmap(entry->kaddr); entry->kaddr = NULL; } } @@ -114,8 +115,8 @@ int suspend_nvs_save(void) list_for_each_entry(entry, &nvs_list, node) if (entry->data) { - entry->kaddr = acpi_os_map_memory(entry->phys_start, - entry->size); + entry->kaddr = acpi_os_ioremap(entry->phys_start, + entry->size); if (!entry->kaddr) { suspend_nvs_free(); return -ENOMEM; diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index e2dd6de5d50c..b0931818cf98 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include #include @@ -302,9 +303,10 @@ void __iomem *__init_refok acpi_os_map_memory(acpi_physical_address phys, acpi_size size) { struct acpi_ioremap *map, *tmp_map; - unsigned long flags, pg_sz; + unsigned long flags; void __iomem *virt; - phys_addr_t pg_off; + acpi_physical_address pg_off; + acpi_size pg_sz; if (phys > ULONG_MAX) { printk(KERN_ERR PREFIX "Cannot map memory that high\n"); @@ -320,7 +322,7 @@ acpi_os_map_memory(acpi_physical_address phys, acpi_size size) pg_off = round_down(phys, PAGE_SIZE); pg_sz = round_up(phys + size, PAGE_SIZE) - pg_off; - virt = ioremap_cache(pg_off, pg_sz); + virt = acpi_os_ioremap(pg_off, pg_sz); if (!virt) { kfree(map); return NULL; @@ -642,7 +644,7 @@ acpi_os_read_memory(acpi_physical_address phys_addr, u32 * value, u32 width) virt_addr = acpi_map_vaddr_lookup(phys_addr, size); rcu_read_unlock(); if (!virt_addr) { - virt_addr = ioremap_cache(phys_addr, size); + virt_addr = acpi_os_ioremap(phys_addr, size); unmap = 1; } if (!value) @@ -678,7 +680,7 @@ acpi_os_write_memory(acpi_physical_address phys_addr, u32 value, u32 width) virt_addr = acpi_map_vaddr_lookup(phys_addr, size); rcu_read_unlock(); if (!virt_addr) { - virt_addr = ioremap_cache(phys_addr, size); + virt_addr = acpi_os_ioremap(phys_addr, size); unmap = 1; } -- cgit v1.2.1 From d551d81d6a720542873f478def60baab6b5df403 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 19 Jan 2011 22:27:55 +0100 Subject: ACPI / PM: Call suspend_nvs_free() earlier during resume It turns out that some device drivers map pages from the ACPI NVS region during resume using ioremap(), which conflicts with ioremap_cache() used for mapping those pages by the NVS save/restore code in nvs.c. Make the NVS pages mapped by the code in nvs.c be unmapped before device drivers' resume routines run. Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- drivers/acpi/sleep.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index fdd3aeeb6def..d6a8cd14de2e 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -166,6 +166,7 @@ static void acpi_pm_finish(void) u32 acpi_state = acpi_target_sleep_state; acpi_ec_unblock_transactions(); + suspend_nvs_free(); if (acpi_state == ACPI_STATE_S0) return; @@ -186,7 +187,6 @@ static void acpi_pm_finish(void) */ static void acpi_pm_end(void) { - suspend_nvs_free(); /* * This is necessary in case acpi_pm_finish() is not called during a * failing transition to a sleep state. -- cgit v1.2.1 From f32be0c54057faac90e0b5e9e13fa9f8fab127ac Mon Sep 17 00:00:00 2001 From: roel kluin Date: Fri, 31 Dec 2010 04:57:46 +0000 Subject: powerpc/macintosh: Fix wrong test in fan_{read,write}_reg() Fix error test in fan_{read,write}_reg() Signed-off-by: Roel Kluin Signed-off-by: Benjamin Herrenschmidt --- drivers/macintosh/therm_pm72.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index 2e041fd0a00c..f3a29f264db9 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -443,7 +443,7 @@ static int fan_read_reg(int reg, unsigned char *buf, int nb) tries = 0; for (;;) { nr = i2c_master_recv(fcu, buf, nb); - if (nr > 0 || (nr < 0 && nr != ENODEV) || tries >= 100) + if (nr > 0 || (nr < 0 && nr != -ENODEV) || tries >= 100) break; msleep(10); ++tries; @@ -464,7 +464,7 @@ static int fan_write_reg(int reg, const unsigned char *ptr, int nb) tries = 0; for (;;) { nw = i2c_master_send(fcu, buf, nb); - if (nw > 0 || (nw < 0 && nw != EIO) || tries >= 100) + if (nw > 0 || (nw < 0 && nw != -EIO) || tries >= 100) break; msleep(10); ++tries; -- cgit v1.2.1 From 48c27016e18f8608c12b7516515ad773093198d8 Mon Sep 17 00:00:00 2001 From: David Engraf Date: Thu, 20 Jan 2011 23:05:17 -0800 Subject: Input: serio - allow registered drivers to get status flag Parse and pass the status byte information to the registered serio drivers as well as the data bytes. Signed-off-by: David Engraf Signed-off-by: Dmitry Torokhov --- drivers/input/serio/serport.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c index 6e362de3f412..8755f5f3ad37 100644 --- a/drivers/input/serio/serport.c +++ b/drivers/input/serio/serport.c @@ -116,14 +116,15 @@ static void serport_ldisc_close(struct tty_struct *tty) /* * serport_ldisc_receive() is called by the low level tty driver when characters - * are ready for us. We forward the characters, one by one to the 'interrupt' - * routine. + * are ready for us. We forward the characters and flags, one by one to the + * 'interrupt' routine. */ static void serport_ldisc_receive(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { struct serport *serport = (struct serport*) tty->disc_data; unsigned long flags; + unsigned int ch_flags; int i; spin_lock_irqsave(&serport->lock, flags); @@ -131,8 +132,23 @@ static void serport_ldisc_receive(struct tty_struct *tty, const unsigned char *c if (!test_bit(SERPORT_ACTIVE, &serport->flags)) goto out; - for (i = 0; i < count; i++) - serio_interrupt(serport->serio, cp[i], 0); + for (i = 0; i < count; i++) { + switch (fp[i]) { + case TTY_FRAME: + ch_flags = SERIO_FRAME; + break; + + case TTY_PARITY: + ch_flags = SERIO_PARITY; + break; + + default: + ch_flags = 0; + break; + } + + serio_interrupt(serport->serio, cp[i], ch_flags); + } out: spin_unlock_irqrestore(&serport->lock, flags); -- cgit v1.2.1 From 94a8cab8caaa56824981c17b6898b73627e8382f Mon Sep 17 00:00:00 2001 From: Philippe Langlais Date: Thu, 20 Jan 2011 23:09:30 -0800 Subject: Input: gpio_keys - switch to using request_any_context_irq The driver does not require hardirq context and can work with threaded interrupts as well, so let's switch to request_any_context_irq which will select the context that is available for us. Signed-off-by: Philippe Langlais Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/gpio_keys.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index 6069abe31e42..eb3006361ee4 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -322,7 +322,7 @@ static void gpio_keys_report_event(struct gpio_button_data *bdata) struct gpio_keys_button *button = bdata->button; struct input_dev *input = bdata->input; unsigned int type = button->type ?: EV_KEY; - int state = (gpio_get_value(button->gpio) ? 1 : 0) ^ button->active_low; + int state = (gpio_get_value_cansleep(button->gpio) ? 1 : 0) ^ button->active_low; input_event(input, type, button->code, !!state); input_sync(input); @@ -410,8 +410,8 @@ static int __devinit gpio_keys_setup_key(struct platform_device *pdev, if (!button->can_disable) irqflags |= IRQF_SHARED; - error = request_irq(irq, gpio_keys_isr, irqflags, desc, bdata); - if (error) { + error = request_any_context_irq(irq, gpio_keys_isr, irqflags, desc, bdata); + if (error < 0) { dev_err(dev, "Unable to claim irq %d; error %d\n", irq, error); goto fail3; -- cgit v1.2.1 From 11f5b30dacdd77bee1028764d91ad58b6c73d50c Mon Sep 17 00:00:00 2001 From: Rakesh Iyer Date: Wed, 19 Jan 2011 23:38:47 -0800 Subject: Input: tegra-kbc - add tegra keyboard driver This patch adds support for the internal matrix keyboard controller for Nvidia Tegra platforms. Signed-off-by: Rakesh Iyer Reviewed-by: Trilok Soni Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 10 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/tegra-kbc.c | 727 +++++++++++++++++++++++++++++++++++++ 3 files changed, 738 insertions(+) create mode 100644 drivers/input/keyboard/tegra-kbc.c (limited to 'drivers') diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 89bd912489e4..b7dca74eb9be 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -343,6 +343,16 @@ config KEYBOARD_NOMADIK To compile this driver as a module, choose M here: the module will be called nmk-ske-keypad. +config KEYBOARD_TEGRA + tristate "NVIDIA Tegra internal matrix keyboard controller support" + depends on ARCH_TEGRA + help + Say Y here if you want to use a matrix keyboard connected directly + to the internal keyboard controller on Tegra SoCs. + + To compile this driver as a module, choose M here: the + module will be called tegra-kbc. + config KEYBOARD_OPENCORES tristate "OpenCores Keyboard Controller" help diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 4dd15cf3f781..3456b931e254 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o +obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o obj-$(CONFIG_KEYBOARD_TNETV107X) += tnetv107x-keypad.o obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c new file mode 100644 index 000000000000..939476659ad6 --- /dev/null +++ b/drivers/input/keyboard/tegra-kbc.c @@ -0,0 +1,727 @@ +/* + * Keyboard class input driver for the NVIDIA Tegra SoC internal matrix + * keyboard controller + * + * Copyright (c) 2009-2011, NVIDIA Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define KBC_MAX_DEBOUNCE_CNT 0x3ffu + +/* KBC row scan time and delay for beginning the row scan. */ +#define KBC_ROW_SCAN_TIME 16 +#define KBC_ROW_SCAN_DLY 5 + +/* KBC uses a 32KHz clock so a cycle = 1/32Khz */ +#define KBC_CYCLE_USEC 32 + +/* KBC Registers */ + +/* KBC Control Register */ +#define KBC_CONTROL_0 0x0 +#define KBC_FIFO_TH_CNT_SHIFT(cnt) (cnt << 14) +#define KBC_DEBOUNCE_CNT_SHIFT(cnt) (cnt << 4) +#define KBC_CONTROL_FIFO_CNT_INT_EN (1 << 3) +#define KBC_CONTROL_KBC_EN (1 << 0) + +/* KBC Interrupt Register */ +#define KBC_INT_0 0x4 +#define KBC_INT_FIFO_CNT_INT_STATUS (1 << 2) + +#define KBC_ROW_CFG0_0 0x8 +#define KBC_COL_CFG0_0 0x18 +#define KBC_INIT_DLY_0 0x28 +#define KBC_RPT_DLY_0 0x2c +#define KBC_KP_ENT0_0 0x30 +#define KBC_KP_ENT1_0 0x34 +#define KBC_ROW0_MASK_0 0x38 + +#define KBC_ROW_SHIFT 3 + +struct tegra_kbc { + void __iomem *mmio; + struct input_dev *idev; + unsigned int irq; + unsigned int wake_enable_rows; + unsigned int wake_enable_cols; + spinlock_t lock; + unsigned int repoll_dly; + unsigned long cp_dly_jiffies; + const struct tegra_kbc_platform_data *pdata; + unsigned short keycode[KBC_MAX_KEY]; + unsigned short current_keys[KBC_MAX_KPENT]; + unsigned int num_pressed_keys; + struct timer_list timer; + struct clk *clk; +}; + +static const u32 tegra_kbc_default_keymap[] = { + KEY(0, 2, KEY_W), + KEY(0, 3, KEY_S), + KEY(0, 4, KEY_A), + KEY(0, 5, KEY_Z), + KEY(0, 7, KEY_FN), + + KEY(1, 7, KEY_MENU), + + KEY(2, 6, KEY_RIGHTALT), + KEY(2, 7, KEY_LEFTALT), + + KEY(3, 0, KEY_5), + KEY(3, 1, KEY_4), + KEY(3, 2, KEY_R), + KEY(3, 3, KEY_E), + KEY(3, 4, KEY_F), + KEY(3, 5, KEY_D), + KEY(3, 6, KEY_X), + + KEY(4, 0, KEY_7), + KEY(4, 1, KEY_6), + KEY(4, 2, KEY_T), + KEY(4, 3, KEY_H), + KEY(4, 4, KEY_G), + KEY(4, 5, KEY_V), + KEY(4, 6, KEY_C), + KEY(4, 7, KEY_SPACE), + + KEY(5, 0, KEY_9), + KEY(5, 1, KEY_8), + KEY(5, 2, KEY_U), + KEY(5, 3, KEY_Y), + KEY(5, 4, KEY_J), + KEY(5, 5, KEY_N), + KEY(5, 6, KEY_B), + KEY(5, 7, KEY_BACKSLASH), + + KEY(6, 0, KEY_MINUS), + KEY(6, 1, KEY_0), + KEY(6, 2, KEY_O), + KEY(6, 3, KEY_I), + KEY(6, 4, KEY_L), + KEY(6, 5, KEY_K), + KEY(6, 6, KEY_COMMA), + KEY(6, 7, KEY_M), + + KEY(7, 1, KEY_EQUAL), + KEY(7, 2, KEY_RIGHTBRACE), + KEY(7, 3, KEY_ENTER), + KEY(7, 7, KEY_MENU), + + KEY(8, 4, KEY_RIGHTSHIFT), + KEY(8, 5, KEY_LEFTSHIFT), + + KEY(9, 5, KEY_RIGHTCTRL), + KEY(9, 7, KEY_LEFTCTRL), + + KEY(11, 0, KEY_LEFTBRACE), + KEY(11, 1, KEY_P), + KEY(11, 2, KEY_APOSTROPHE), + KEY(11, 3, KEY_SEMICOLON), + KEY(11, 4, KEY_SLASH), + KEY(11, 5, KEY_DOT), + + KEY(12, 0, KEY_F10), + KEY(12, 1, KEY_F9), + KEY(12, 2, KEY_BACKSPACE), + KEY(12, 3, KEY_3), + KEY(12, 4, KEY_2), + KEY(12, 5, KEY_UP), + KEY(12, 6, KEY_PRINT), + KEY(12, 7, KEY_PAUSE), + + KEY(13, 0, KEY_INSERT), + KEY(13, 1, KEY_DELETE), + KEY(13, 3, KEY_PAGEUP), + KEY(13, 4, KEY_PAGEDOWN), + KEY(13, 5, KEY_RIGHT), + KEY(13, 6, KEY_DOWN), + KEY(13, 7, KEY_LEFT), + + KEY(14, 0, KEY_F11), + KEY(14, 1, KEY_F12), + KEY(14, 2, KEY_F8), + KEY(14, 3, KEY_Q), + KEY(14, 4, KEY_F4), + KEY(14, 5, KEY_F3), + KEY(14, 6, KEY_1), + KEY(14, 7, KEY_F7), + + KEY(15, 0, KEY_ESC), + KEY(15, 1, KEY_GRAVE), + KEY(15, 2, KEY_F5), + KEY(15, 3, KEY_TAB), + KEY(15, 4, KEY_F1), + KEY(15, 5, KEY_F2), + KEY(15, 6, KEY_CAPSLOCK), + KEY(15, 7, KEY_F6), +}; + +static const struct matrix_keymap_data tegra_kbc_default_keymap_data = { + .keymap = tegra_kbc_default_keymap, + .keymap_size = ARRAY_SIZE(tegra_kbc_default_keymap), +}; + +static void tegra_kbc_report_released_keys(struct input_dev *input, + unsigned short old_keycodes[], + unsigned int old_num_keys, + unsigned short new_keycodes[], + unsigned int new_num_keys) +{ + unsigned int i, j; + + for (i = 0; i < old_num_keys; i++) { + for (j = 0; j < new_num_keys; j++) + if (old_keycodes[i] == new_keycodes[j]) + break; + + if (j == new_num_keys) + input_report_key(input, old_keycodes[i], 0); + } +} + +static void tegra_kbc_report_pressed_keys(struct input_dev *input, + unsigned char scancodes[], + unsigned short keycodes[], + unsigned int num_pressed_keys) +{ + unsigned int i; + + for (i = 0; i < num_pressed_keys; i++) { + input_event(input, EV_MSC, MSC_SCAN, scancodes[i]); + input_report_key(input, keycodes[i], 1); + } +} + +static void tegra_kbc_report_keys(struct tegra_kbc *kbc) +{ + unsigned char scancodes[KBC_MAX_KPENT]; + unsigned short keycodes[KBC_MAX_KPENT]; + u32 val = 0; + unsigned int i; + unsigned int num_down = 0; + unsigned long flags; + + spin_lock_irqsave(&kbc->lock, flags); + for (i = 0; i < KBC_MAX_KPENT; i++) { + if ((i % 4) == 0) + val = readl(kbc->mmio + KBC_KP_ENT0_0 + i); + + if (val & 0x80) { + unsigned int col = val & 0x07; + unsigned int row = (val >> 3) & 0x0f; + unsigned char scancode = + MATRIX_SCAN_CODE(row, col, KBC_ROW_SHIFT); + + scancodes[num_down] = scancode; + keycodes[num_down++] = kbc->keycode[scancode]; + } + + val >>= 8; + } + spin_unlock_irqrestore(&kbc->lock, flags); + + tegra_kbc_report_released_keys(kbc->idev, + kbc->current_keys, kbc->num_pressed_keys, + keycodes, num_down); + tegra_kbc_report_pressed_keys(kbc->idev, scancodes, keycodes, num_down); + input_sync(kbc->idev); + + memcpy(kbc->current_keys, keycodes, sizeof(kbc->current_keys)); + kbc->num_pressed_keys = num_down; +} + +static void tegra_kbc_keypress_timer(unsigned long data) +{ + struct tegra_kbc *kbc = (struct tegra_kbc *)data; + unsigned long flags; + u32 val; + unsigned int i; + + val = (readl(kbc->mmio + KBC_INT_0) >> 4) & 0xf; + if (val) { + unsigned long dly; + + tegra_kbc_report_keys(kbc); + + /* + * If more than one keys are pressed we need not wait + * for the repoll delay. + */ + dly = (val == 1) ? kbc->repoll_dly : 1; + mod_timer(&kbc->timer, jiffies + msecs_to_jiffies(dly)); + } else { + /* Release any pressed keys and exit the polling loop */ + for (i = 0; i < kbc->num_pressed_keys; i++) + input_report_key(kbc->idev, kbc->current_keys[i], 0); + input_sync(kbc->idev); + + kbc->num_pressed_keys = 0; + + /* All keys are released so enable the keypress interrupt */ + spin_lock_irqsave(&kbc->lock, flags); + val = readl(kbc->mmio + KBC_CONTROL_0); + val |= KBC_CONTROL_FIFO_CNT_INT_EN; + writel(val, kbc->mmio + KBC_CONTROL_0); + spin_unlock_irqrestore(&kbc->lock, flags); + } +} + +static irqreturn_t tegra_kbc_isr(int irq, void *args) +{ + struct tegra_kbc *kbc = args; + u32 val, ctl; + + /* + * Until all keys are released, defer further processing to + * the polling loop in tegra_kbc_keypress_timer + */ + ctl = readl(kbc->mmio + KBC_CONTROL_0); + ctl &= ~KBC_CONTROL_FIFO_CNT_INT_EN; + writel(ctl, kbc->mmio + KBC_CONTROL_0); + + /* + * Quickly bail out & reenable interrupts if the fifo threshold + * count interrupt wasn't the interrupt source + */ + val = readl(kbc->mmio + KBC_INT_0); + writel(val, kbc->mmio + KBC_INT_0); + + if (val & KBC_INT_FIFO_CNT_INT_STATUS) { + /* + * Schedule timer to run when hardware is in continuous + * polling mode. + */ + mod_timer(&kbc->timer, jiffies + kbc->cp_dly_jiffies); + } else { + ctl |= KBC_CONTROL_FIFO_CNT_INT_EN; + writel(ctl, kbc->mmio + KBC_CONTROL_0); + } + + return IRQ_HANDLED; +} + +static void tegra_kbc_setup_wakekeys(struct tegra_kbc *kbc, bool filter) +{ + const struct tegra_kbc_platform_data *pdata = kbc->pdata; + int i; + unsigned int rst_val; + + BUG_ON(pdata->wake_cnt > KBC_MAX_KEY); + rst_val = (filter && pdata->wake_cnt) ? ~0 : 0; + + for (i = 0; i < KBC_MAX_ROW; i++) + writel(rst_val, kbc->mmio + KBC_ROW0_MASK_0 + i * 4); + + if (filter) { + for (i = 0; i < pdata->wake_cnt; i++) { + u32 val, addr; + addr = pdata->wake_cfg[i].row * 4 + KBC_ROW0_MASK_0; + val = readl(kbc->mmio + addr); + val &= ~(1 << pdata->wake_cfg[i].col); + writel(val, kbc->mmio + addr); + } + } +} + +static void tegra_kbc_config_pins(struct tegra_kbc *kbc) +{ + const struct tegra_kbc_platform_data *pdata = kbc->pdata; + int i; + + for (i = 0; i < KBC_MAX_GPIO; i++) { + u32 r_shft = 5 * (i % 6); + u32 c_shft = 4 * (i % 8); + u32 r_mask = 0x1f << r_shift; + u32 c_mask = 0x0f << c_shift; + u32 r_offs = (i / 6) * 4 + KBC_ROW_CFG0_0; + u32 c_offs = (i / 8) * 4 + KBC_COL_CFG0_0; + u32 row_cfg = readl(kbc->mmio + r_offs); + u32 col_cfg = readl(kbc->mmio + c_offs); + + row_cfg &= ~r_mask; + col_cfg &= ~c_mask; + + if (pdata->pin_cfg[i].is_row) + row_cfg |= ((pdata->pin_cfg[i].num << 1) | 1) << r_shft; + else + col_cfg |= ((pdata->pin_cfg[i].num << 1) | 1) << c_shft; + + writel(row_cfg, kbc->mmio + r_offs); + writel(col_cfg, kbc->mmio + c_offs); + } +} + +static int tegra_kbc_start(struct tegra_kbc *kbc) +{ + const struct tegra_kbc_platform_data *pdata = kbc->pdata; + unsigned long flags; + unsigned int debounce_cnt; + u32 val = 0; + + clk_enable(kbc->clk); + + /* Reset the KBC controller to clear all previous status.*/ + tegra_periph_reset_assert(kbc->clk); + udelay(100); + tegra_periph_reset_deassert(kbc->clk); + udelay(100); + + tegra_kbc_config_pins(kbc); + tegra_kbc_setup_wakekeys(kbc, false); + + writel(pdata->repeat_cnt, kbc->mmio + KBC_RPT_DLY_0); + + /* Keyboard debounce count is maximum of 12 bits. */ + debounce_cnt = min(pdata->debounce_cnt, KBC_MAX_DEBOUNCE_CNT); + val = KBC_DEBOUNCE_CNT_SHIFT(debounce_cnt); + val |= KBC_FIFO_TH_CNT_SHIFT(1); /* set fifo interrupt threshold to 1 */ + val |= KBC_CONTROL_FIFO_CNT_INT_EN; /* interrupt on FIFO threshold */ + val |= KBC_CONTROL_KBC_EN; /* enable */ + writel(val, kbc->mmio + KBC_CONTROL_0); + + /* + * Compute the delay(ns) from interrupt mode to continuous polling + * mode so the timer routine is scheduled appropriately. + */ + val = readl(kbc->mmio + KBC_INIT_DLY_0); + kbc->cp_dly_jiffies = usecs_to_jiffies((val & 0xfffff) * 32); + + kbc->num_pressed_keys = 0; + + /* + * Atomically clear out any remaining entries in the key FIFO + * and enable keyboard interrupts. + */ + spin_lock_irqsave(&kbc->lock, flags); + while (1) { + val = readl(kbc->mmio + KBC_INT_0); + val >>= 4; + if (!val) + break; + + val = readl(kbc->mmio + KBC_KP_ENT0_0); + val = readl(kbc->mmio + KBC_KP_ENT1_0); + } + writel(0x7, kbc->mmio + KBC_INT_0); + spin_unlock_irqrestore(&kbc->lock, flags); + + enable_irq(kbc->irq); + + return 0; +} + +static void tegra_kbc_stop(struct tegra_kbc *kbc) +{ + unsigned long flags; + u32 val; + + spin_lock_irqsave(&kbc->lock, flags); + val = readl(kbc->mmio + KBC_CONTROL_0); + val &= ~1; + writel(val, kbc->mmio + KBC_CONTROL_0); + spin_unlock_irqrestore(&kbc->lock, flags); + + disable_irq(kbc->irq); + del_timer_sync(&kbc->timer); + + clk_disable(kbc->clk); +} + +static int tegra_kbc_open(struct input_dev *dev) +{ + struct tegra_kbc *kbc = input_get_drvdata(dev); + + return tegra_kbc_start(kbc); +} + +static void tegra_kbc_close(struct input_dev *dev) +{ + struct tegra_kbc *kbc = input_get_drvdata(dev); + + return tegra_kbc_stop(kbc); +} + +static bool __devinit +tegra_kbc_check_pin_cfg(const struct tegra_kbc_platform_data *pdata, + struct device *dev, unsigned int *num_rows) +{ + int i; + + *num_rows = 0; + + for (i = 0; i < KBC_MAX_GPIO; i++) { + const struct tegra_kbc_pin_cfg *pin_cfg = &pdata->pin_cfg[i]; + + if (pin_cfg->is_row) { + if (pin_cfg->num >= KBC_MAX_ROW) { + dev_err(dev, + "pin_cfg[%d]: invalid row number %d\n", + i, pin_cfg->num); + return false; + } + (*num_rows)++; + } else { + if (pin_cfg->num >= KBC_MAX_COL) { + dev_err(dev, + "pin_cfg[%d]: invalid column number %d\n", + i, pin_cfg->num); + return false; + } + } + } + + return true; +} + +static int __devinit tegra_kbc_probe(struct platform_device *pdev) +{ + const struct tegra_kbc_platform_data *pdata = pdev->dev.platform_data; + const struct matrix_keymap_data *keymap_data; + struct tegra_kbc *kbc; + struct input_dev *input_dev; + struct resource *res; + int irq; + int err; + int i; + int num_rows = 0; + unsigned int debounce_cnt; + unsigned int scan_time_rows; + + if (!pdata) + return -EINVAL; + + if (!tegra_kbc_check_pin_cfg(pdata, &pdev->dev, &num_rows)) + return -EINVAL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "failed to get I/O memory\n"); + return -ENXIO; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get keyboard IRQ\n"); + return -ENXIO; + } + + kbc = kzalloc(sizeof(*kbc), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!kbc || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + kbc->pdata = pdata; + kbc->idev = input_dev; + kbc->irq = irq; + spin_lock_init(&kbc->lock); + setup_timer(&kbc->timer, tegra_kbc_keypress_timer, (unsigned long)kbc); + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (!res) { + dev_err(&pdev->dev, "failed to request I/O memory\n"); + err = -EBUSY; + goto err_free_mem; + } + + kbc->mmio = ioremap(res->start, resource_size(res)); + if (!kbc->mmio) { + dev_err(&pdev->dev, "failed to remap I/O memory\n"); + err = -ENXIO; + goto err_free_mem_region; + } + + kbc->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(kbc->clk)) { + dev_err(&pdev->dev, "failed to get keyboard clock\n"); + err = PTR_ERR(kbc->clk); + goto err_iounmap; + } + + kbc->wake_enable_rows = 0; + kbc->wake_enable_cols = 0; + for (i = 0; i < pdata->wake_cnt; i++) { + kbc->wake_enable_rows |= (1 << pdata->wake_cfg[i].row); + kbc->wake_enable_cols |= (1 << pdata->wake_cfg[i].col); + } + + /* + * The time delay between two consecutive reads of the FIFO is + * the sum of the repeat time and the time taken for scanning + * the rows. There is an additional delay before the row scanning + * starts. The repoll delay is computed in milliseconds. + */ + debounce_cnt = min(pdata->debounce_cnt, KBC_MAX_DEBOUNCE_CNT); + scan_time_rows = (KBC_ROW_SCAN_TIME + debounce_cnt) * num_rows; + kbc->repoll_dly = KBC_ROW_SCAN_DLY + scan_time_rows + pdata->repeat_cnt; + kbc->repoll_dly = ((kbc->repoll_dly * KBC_CYCLE_USEC) + 999) / 1000; + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + input_dev->open = tegra_kbc_open; + input_dev->close = tegra_kbc_close; + + input_set_drvdata(input_dev, kbc); + + input_dev->evbit[0] = BIT_MASK(EV_KEY); + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + + input_dev->keycode = kbc->keycode; + input_dev->keycodesize = sizeof(kbc->keycode[0]); + input_dev->keycodemax = ARRAY_SIZE(kbc->keycode); + + keymap_data = pdata->keymap_data ?: &tegra_kbc_default_keymap_data; + matrix_keypad_build_keymap(keymap_data, KBC_ROW_SHIFT, + input_dev->keycode, input_dev->keybit); + + err = request_irq(kbc->irq, tegra_kbc_isr, IRQF_TRIGGER_HIGH, + pdev->name, kbc); + if (err) { + dev_err(&pdev->dev, "failed to request keyboard IRQ\n"); + goto err_put_clk; + } + + disable_irq(kbc->irq); + + err = input_register_device(kbc->idev); + if (err) { + dev_err(&pdev->dev, "failed to register input device\n"); + goto err_free_irq; + } + + platform_set_drvdata(pdev, kbc); + device_init_wakeup(&pdev->dev, pdata->wakeup); + + return 0; + +err_free_irq: + free_irq(kbc->irq, pdev); +err_put_clk: + clk_put(kbc->clk); +err_iounmap: + iounmap(kbc->mmio); +err_free_mem_region: + release_mem_region(res->start, resource_size(res)); +err_free_mem: + input_free_device(kbc->idev); + kfree(kbc); + + return err; +} + +static int __devexit tegra_kbc_remove(struct platform_device *pdev) +{ + struct tegra_kbc *kbc = platform_get_drvdata(pdev); + struct resource *res; + + free_irq(kbc->irq, pdev); + clk_put(kbc->clk); + + input_unregister_device(kbc->idev); + iounmap(kbc->mmio); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + kfree(kbc); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int tegra_kbc_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct tegra_kbc *kbc = platform_get_drvdata(pdev); + + if (device_may_wakeup(&pdev->dev)) { + tegra_kbc_setup_wakekeys(kbc, true); + enable_irq_wake(kbc->irq); + /* Forcefully clear the interrupt status */ + writel(0x7, kbc->mmio + KBC_INT_0); + msleep(30); + } else { + mutex_lock(&kbc->idev->mutex); + if (kbc->idev->users) + tegra_kbc_stop(kbc); + mutex_unlock(&kbc->idev->mutex); + } + + return 0; +} + +static int tegra_kbc_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct tegra_kbc *kbc = platform_get_drvdata(pdev); + int err = 0; + + if (device_may_wakeup(&pdev->dev)) { + disable_irq_wake(kbc->irq); + tegra_kbc_setup_wakekeys(kbc, false); + } else { + mutex_lock(&kbc->idev->mutex); + if (kbc->idev->users) + err = tegra_kbc_start(kbc); + mutex_unlock(&kbc->idev->mutex); + } + + return err; +} +#endif + +static SIMPLE_DEV_PM_OPS(tegra_kbc_pm_ops, tegra_kbc_suspend, tegra_kbc_resume); + +static struct platform_driver tegra_kbc_driver = { + .probe = tegra_kbc_probe, + .remove = __devexit_p(tegra_kbc_remove), + .driver = { + .name = "tegra-kbc", + .owner = THIS_MODULE, + .pm = &tegra_kbc_pm_ops, + }, +}; + +static void __exit tegra_kbc_exit(void) +{ + platform_driver_unregister(&tegra_kbc_driver); +} +module_exit(tegra_kbc_exit); + +static int __init tegra_kbc_init(void) +{ + return platform_driver_register(&tegra_kbc_driver); +} +module_init(tegra_kbc_init); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Rakesh Iyer "); +MODULE_DESCRIPTION("Tegra matrix keyboard controller driver"); +MODULE_ALIAS("platform:tegra-kbc"); -- cgit v1.2.1 From cb1b145929b5b7e1bdc5f76dd2905df9f89c038e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 20 Jan 2011 23:05:17 -0800 Subject: Input: sparse-keymap - fix KEY_VSW handling in sparse_keymap_setup We were forgetting to set up device capabilities for KEY_VSW entries. Reported-by: Tapio Vihuri Tested-by: Tapio Vihuri Signed-off-by: Dmitry Torokhov --- drivers/input/sparse-keymap.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c index a29a7812bd46..7729e547ba65 100644 --- a/drivers/input/sparse-keymap.c +++ b/drivers/input/sparse-keymap.c @@ -201,6 +201,7 @@ int sparse_keymap_setup(struct input_dev *dev, break; case KE_SW: + case KE_VSW: __set_bit(EV_SW, dev->evbit); __set_bit(entry->sw.code, dev->swbit); break; -- cgit v1.2.1 From 8a6afb9a950de01457a4267bcbe3292e56412326 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 21 Jan 2011 16:56:47 +0100 Subject: spi/spi_sh_msiof: fix wrong address calculation, which leads to an Oops NULL + != NULL, but reading from that address is usually not a very good idea and often leads to problems, like kernel Oopses in this case, easily reproducible by writing to an SD-card, used in SPI mode. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Grant Likely --- drivers/spi/spi_sh_msiof.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi_sh_msiof.c b/drivers/spi/spi_sh_msiof.c index 56f60c8ea0ab..2c665fceaac7 100644 --- a/drivers/spi/spi_sh_msiof.c +++ b/drivers/spi/spi_sh_msiof.c @@ -509,9 +509,11 @@ static int sh_msiof_spi_txrx(struct spi_device *spi, struct spi_transfer *t) bytes_done = 0; while (bytes_done < t->len) { + void *rx_buf = t->rx_buf ? t->rx_buf + bytes_done : NULL; + const void *tx_buf = t->tx_buf ? t->tx_buf + bytes_done : NULL; n = sh_msiof_spi_txrx_once(p, tx_fifo, rx_fifo, - t->tx_buf + bytes_done, - t->rx_buf + bytes_done, + tx_buf, + rx_buf, words, bits); if (n < 0) break; -- cgit v1.2.1 From db6b175fa6ad1408cbb2fb62949a6d55cfece03e Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Fri, 14 Jan 2011 09:47:26 -0800 Subject: acpi_pm: Clear pmtmr_ioport if acpi_pm initialization fails If the acpi pm timer throws invalid data, clear pmtmr_ioport so the pm timer won't accidentally be used. This was found when using Xen where there is a acpi pm reported, but gives bogus values, and other code was continuing to try to use the pm timer after the initialization failed. [jstultz: Catch additional failure and reword changelog message. ] Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: John Stultz LKML-Reference: <1295027246-11110-1-git-send-email-johnstul@us.ibm.com> Signed-off-by: Thomas Gleixner --- drivers/clocksource/acpi_pm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c index cfb0f5278415..effe7974aa9a 100644 --- a/drivers/clocksource/acpi_pm.c +++ b/drivers/clocksource/acpi_pm.c @@ -202,17 +202,21 @@ static int __init init_acpi_pm_clocksource(void) printk(KERN_INFO "PM-Timer had inconsistent results:" " 0x%#llx, 0x%#llx - aborting.\n", value1, value2); + pmtmr_ioport = 0; return -EINVAL; } if (i == ACPI_PM_READ_CHECKS) { printk(KERN_INFO "PM-Timer failed consistency check " " (0x%#llx) - aborting.\n", value1); + pmtmr_ioport = 0; return -ENODEV; } } - if (verify_pmtmr_rate() != 0) + if (verify_pmtmr_rate() != 0){ + pmtmr_ioport = 0; return -ENODEV; + } return clocksource_register_hz(&clocksource_acpi_pm, PMTMR_TICKS_PER_SEC); -- cgit v1.2.1 From aa0be0f4659f91f31e45adc422b1788cb36ffddc Mon Sep 17 00:00:00 2001 From: John Stultz Date: Thu, 20 Jan 2011 15:26:12 -0800 Subject: RTC: Propagate error handling via rtc_timer_enqueue properly In cases where RTC hardware does not support alarms, the virtualized RTC interfaces did not have a way to propagate the error up to userland. This patch extends rtc_timer_enqueue so it catches errors from the hardware and returns them upwards to the virtualized interfaces. To simplify error handling, it also internalizes the management of the timer->enabled bit into rtc_timer_enqueue and rtc_timer_remove. Also makes rtc_timer_enqueue and rtc_timer_remove static. Reported-by: David Daney Reported-by: Andreas Schwab Reported-by: Geert Uytterhoeven Diagnosed-by: David Daney Tested-by: David Daney Signed-off-by: John Stultz LKML-Reference: <1295565973-14358-1-git-send-email-john.stultz@linaro.org> Signed-off-by: Thomas Gleixner --- drivers/rtc/interface.c | 49 ++++++++++++++++++++++++++++--------------------- 1 file changed, 28 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index 90384b9f6b2c..f1ba2c696528 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -16,6 +16,9 @@ #include #include +static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer); +static void rtc_timer_remove(struct rtc_device *rtc, struct rtc_timer *timer); + static int __rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm) { int err; @@ -175,16 +178,14 @@ int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) return err; if (rtc->aie_timer.enabled) { rtc_timer_remove(rtc, &rtc->aie_timer); - rtc->aie_timer.enabled = 0; } rtc->aie_timer.node.expires = rtc_tm_to_ktime(alarm->time); rtc->aie_timer.period = ktime_set(0, 0); if (alarm->enabled) { - rtc->aie_timer.enabled = 1; - rtc_timer_enqueue(rtc, &rtc->aie_timer); + err = rtc_timer_enqueue(rtc, &rtc->aie_timer); } mutex_unlock(&rtc->ops_lock); - return 0; + return err; } EXPORT_SYMBOL_GPL(rtc_set_alarm); @@ -195,15 +196,15 @@ int rtc_alarm_irq_enable(struct rtc_device *rtc, unsigned int enabled) return err; if (rtc->aie_timer.enabled != enabled) { - if (enabled) { - rtc->aie_timer.enabled = 1; - rtc_timer_enqueue(rtc, &rtc->aie_timer); - } else { + if (enabled) + err = rtc_timer_enqueue(rtc, &rtc->aie_timer); + else rtc_timer_remove(rtc, &rtc->aie_timer); - rtc->aie_timer.enabled = 0; - } } + if (err) + return err; + if (!rtc->ops) err = -ENODEV; else if (!rtc->ops->alarm_irq_enable) @@ -235,12 +236,9 @@ int rtc_update_irq_enable(struct rtc_device *rtc, unsigned int enabled) now = rtc_tm_to_ktime(tm); rtc->uie_rtctimer.node.expires = ktime_add(now, onesec); rtc->uie_rtctimer.period = ktime_set(1, 0); - rtc->uie_rtctimer.enabled = 1; - rtc_timer_enqueue(rtc, &rtc->uie_rtctimer); - } else { + err = rtc_timer_enqueue(rtc, &rtc->uie_rtctimer); + } else rtc_timer_remove(rtc, &rtc->uie_rtctimer); - rtc->uie_rtctimer.enabled = 0; - } out: mutex_unlock(&rtc->ops_lock); @@ -488,10 +486,13 @@ EXPORT_SYMBOL_GPL(rtc_irq_set_freq); * Enqueues a timer onto the rtc devices timerqueue and sets * the next alarm event appropriately. * + * Sets the enabled bit on the added timer. + * * Must hold ops_lock for proper serialization of timerqueue */ -void rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer) +static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer) { + timer->enabled = 1; timerqueue_add(&rtc->timerqueue, &timer->node); if (&timer->node == timerqueue_getnext(&rtc->timerqueue)) { struct rtc_wkalrm alarm; @@ -501,7 +502,13 @@ void rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer) err = __rtc_set_alarm(rtc, &alarm); if (err == -ETIME) schedule_work(&rtc->irqwork); + else if (err) { + timerqueue_del(&rtc->timerqueue, &timer->node); + timer->enabled = 0; + return err; + } } + return 0; } /** @@ -512,13 +519,15 @@ void rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer) * Removes a timer onto the rtc devices timerqueue and sets * the next alarm event appropriately. * + * Clears the enabled bit on the removed timer. + * * Must hold ops_lock for proper serialization of timerqueue */ -void rtc_timer_remove(struct rtc_device *rtc, struct rtc_timer *timer) +static void rtc_timer_remove(struct rtc_device *rtc, struct rtc_timer *timer) { struct timerqueue_node *next = timerqueue_getnext(&rtc->timerqueue); timerqueue_del(&rtc->timerqueue, &timer->node); - + timer->enabled = 0; if (next == &timer->node) { struct rtc_wkalrm alarm; int err; @@ -626,8 +635,7 @@ int rtc_timer_start(struct rtc_device *rtc, struct rtc_timer* timer, timer->node.expires = expires; timer->period = period; - timer->enabled = 1; - rtc_timer_enqueue(rtc, timer); + ret = rtc_timer_enqueue(rtc, timer); mutex_unlock(&rtc->ops_lock); return ret; @@ -645,7 +653,6 @@ int rtc_timer_cancel(struct rtc_device *rtc, struct rtc_timer* timer) mutex_lock(&rtc->ops_lock); if (timer->enabled) rtc_timer_remove(rtc, timer); - timer->enabled = 0; mutex_unlock(&rtc->ops_lock); return ret; } -- cgit v1.2.1 From d5553a556165535337ece8592f066407c62eec2e Mon Sep 17 00:00:00 2001 From: John Stultz Date: Thu, 20 Jan 2011 15:26:13 -0800 Subject: RTC: Properly handle rtc_read_alarm error propagation and fix bug In reviewing cases where the virtualized interfaces didn't propagate errors properly, I noticed rtc_read_alarm needed fixing. In doing so I noticed my RTC rework dropped a memset and that the behavior of rtc_read_alarm shouldn't be conditionalized on the alarm.enabled flag (as the alarm may be set, but the irqs may be disabled). So those were corrected as well. CC: Thomas Gleixner Signed-off-by: John Stultz LKML-Reference: <1295565973-14358-2-git-send-email-john.stultz@linaro.org> Signed-off-by: Thomas Gleixner --- drivers/rtc/interface.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index f1ba2c696528..925006d33109 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -123,12 +123,18 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) err = mutex_lock_interruptible(&rtc->ops_lock); if (err) return err; - alarm->enabled = rtc->aie_timer.enabled; - if (alarm->enabled) + if (rtc->ops == NULL) + err = -ENODEV; + else if (!rtc->ops->read_alarm) + err = -EINVAL; + else { + memset(alarm, 0, sizeof(struct rtc_wkalrm)); + alarm->enabled = rtc->aie_timer.enabled; alarm->time = rtc_ktime_to_tm(rtc->aie_timer.node.expires); + } mutex_unlock(&rtc->ops_lock); - return 0; + return err; } EXPORT_SYMBOL_GPL(rtc_read_alarm); -- cgit v1.2.1 From b5cc8ca1c9c3a37eaddf709b2fd3e1699aee41ba Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 21 Jan 2011 16:56:46 +0100 Subject: RTC: Remove Kconfig symbol for UIE emulation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The effect of changing the value of this symbol is gone since 042620a (RTC: Remove UIE emulation). Remove symbol too. Signed-off-by: Uwe Kleine-König Cc: Alessandro Zummo Cc: Richard Cochran Cc: John Stultz LKML-Reference: <1295625406-15340-1-git-send-email-u.kleine-koenig@pengutronix.de> Signed-off-by: Thomas Gleixner --- drivers/rtc/Kconfig | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 4941cade319f..cdd97192dc69 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -97,18 +97,6 @@ config RTC_INTF_DEV If unsure, say Y. -config RTC_INTF_DEV_UIE_EMUL - bool "RTC UIE emulation on dev interface" - depends on RTC_INTF_DEV - help - Provides an emulation for RTC_UIE if the underlying rtc chip - driver does not expose RTC_UIE ioctls. Those requests generate - once-per-second update interrupts, used for synchronization. - - The emulation code will read the time from the hardware - clock several times per second, please enable this option - only if you know that you really need it. - config RTC_DRV_TEST tristate "Test driver/device" help -- cgit v1.2.1 From 239712ebb2b4750431980d33993ea05c6ac7ff65 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Thu, 20 Jan 2011 08:08:04 -0800 Subject: iwlwifi: don't read sku information from EEPROM for 4965 For all the new devices, the sku information should read from EEPROM but for legacy devices such as 4965, appearly the EEPROM does not contain the necessary information. so skip the read from EEPROM and go back to use software configuration. Reported-by: Helmut Schaa Signed-off-by: Wey-Yi Guy Tested-by: Helmut Schaa Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 1 + drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c | 11 +++++++---- 2 files changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 3f1e5f1bf847..91a9f5253469 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2624,6 +2624,7 @@ struct iwl_cfg iwl4965_agn_cfg = { .fw_name_pre = IWL4965_FW_PRE, .ucode_api_max = IWL4965_UCODE_API_MAX, .ucode_api_min = IWL4965_UCODE_API_MIN, + .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N, .valid_tx_ant = ANT_AB, .valid_rx_ant = ANT_ABC, .eeprom_ver = EEPROM_4965_EEPROM_VERSION, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c index 14ceb4df72f6..27b5a3eec9dc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c @@ -152,11 +152,14 @@ int iwl_eeprom_check_sku(struct iwl_priv *priv) eeprom_sku = iwl_eeprom_query16(priv, EEPROM_SKU_CAP); - priv->cfg->sku = ((eeprom_sku & EEPROM_SKU_CAP_BAND_SELECTION) >> + if (!priv->cfg->sku) { + /* not using sku overwrite */ + priv->cfg->sku = + ((eeprom_sku & EEPROM_SKU_CAP_BAND_SELECTION) >> EEPROM_SKU_CAP_BAND_POS); - if (eeprom_sku & EEPROM_SKU_CAP_11N_ENABLE) - priv->cfg->sku |= IWL_SKU_N; - + if (eeprom_sku & EEPROM_SKU_CAP_11N_ENABLE) + priv->cfg->sku |= IWL_SKU_N; + } if (!priv->cfg->sku) { IWL_ERR(priv, "Invalid device sku\n"); return -EINVAL; -- cgit v1.2.1 From 6f4810101a629b31b5427872a09ea092cfc5c4bd Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 20 Jan 2011 17:47:39 -0800 Subject: ath9k_hw: disabled PAPRD for AR9003 AR9003's PAPRD was enabled prematurely, and is causing some large discrepancies on throughput and network connectivity. For example downlink (RX) throughput against an AR9280 AP can vary widlely from 43-73 Mbit/s while disabling this gets AR9382 (2x2) up to around 93 Mbit/s in a 2.4 GHz HT20 setup. Cc: stable@kernel.org Cc: Paul Shaw Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 6 +++++- drivers/net/wireless/ath/ath9k/hw.h | 1 + 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 1afb8bb85756..9f01e50d5cda 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -369,6 +369,9 @@ static void ath9k_hw_init_config(struct ath_hw *ah) else ah->config.ht_enable = 0; + /* PAPRD needs some more work to be enabled */ + ah->config.paprd_disable = 1; + ah->config.rx_intr_mitigation = true; ah->config.pcieSerDesWrite = true; @@ -1933,7 +1936,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) pCap->rx_status_len = sizeof(struct ar9003_rxs); pCap->tx_desc_len = sizeof(struct ar9003_txc); pCap->txs_len = sizeof(struct ar9003_txs); - if (ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) + if (!ah->config.paprd_disable && + ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) pCap->hw_caps |= ATH9K_HW_CAP_PAPRD; } else { pCap->tx_desc_len = sizeof(struct ath_desc); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 5a3dfec45e96..ea9fde670646 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -225,6 +225,7 @@ struct ath9k_ops_config { u32 pcie_waen; u8 analog_shiftreg; u8 ht_enable; + u8 paprd_disable; u32 ofdm_trig_low; u32 ofdm_trig_high; u32 cck_trig_high; -- cgit v1.2.1 From 783cd01e140d9db5c2d2279a96b81e16f9d81fef Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 21 Jan 2011 18:52:38 +0100 Subject: ath9k: add missing ps wakeup/restore calls There are several places where ath_reset() was called without proper calls to ath9k_ps_wakeup/ath9k_ps_restore. To fix this, add those calls directly to ath_reset and drop them from callers where it makes sense. Also add them to the config callback around ath_update_txpow to fix a crash that happens when the tx power changed before any vif is brought up. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 8 +++++--- drivers/net/wireless/ath/ath9k/xmit.c | 2 -- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index f90a6ca94a76..c79c97be6cd4 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -592,14 +592,12 @@ void ath9k_tasklet(unsigned long data) u32 status = sc->intrstatus; u32 rxmask; - ath9k_ps_wakeup(sc); - if (status & ATH9K_INT_FATAL) { ath_reset(sc, true); - ath9k_ps_restore(sc); return; } + ath9k_ps_wakeup(sc); spin_lock(&sc->sc_pcu_lock); if (!ath9k_hw_check_alive(ah)) @@ -969,6 +967,7 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) /* Stop ANI */ del_timer_sync(&common->ani.timer); + ath9k_ps_wakeup(sc); spin_lock_bh(&sc->sc_pcu_lock); ieee80211_stop_queues(hw); @@ -1015,6 +1014,7 @@ int ath_reset(struct ath_softc *sc, bool retry_tx) /* Start ANI */ ath_start_ani(common); + ath9k_ps_restore(sc); return r; } @@ -1701,7 +1701,9 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) skip_chan_change: if (changed & IEEE80211_CONF_CHANGE_POWER) { sc->config.txpowlimit = 2 * conf->power_level; + ath9k_ps_wakeup(sc); ath_update_txpow(sc); + ath9k_ps_restore(sc); } spin_lock_bh(&sc->wiphy_lock); diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 332d1feb5c18..33a37edbaf79 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -2113,9 +2113,7 @@ static void ath_tx_complete_poll_work(struct work_struct *work) if (needreset) { ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_RESET, "tx hung, resetting the chip\n"); - ath9k_ps_wakeup(sc); ath_reset(sc, true); - ath9k_ps_restore(sc); } ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, -- cgit v1.2.1 From bdc4bf652bc0271ba8f1f25bbd3dbac90bead44e Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Fri, 21 Jan 2011 13:40:54 -0600 Subject: rtlwifi: Fix possible NULL dereference In drivers/net/wireless/rtlwifi/pci.c::_rtl_pci_rx_interrupt() we call dev_alloc_skb(), which may fail and return NULL, but we do not check the returned value against NULL before dereferencing the returned pointer. This may lead to a NULL pointer dereference which means we'll crash - not good. In a separate call to dev_alloc_skb(), the debug level is changed so that the failure message will always be logged. Signed-off-by: Jesper Juhl Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 0fa36aa6701a..1758d4463247 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -619,6 +619,13 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) struct sk_buff *uskb = NULL; u8 *pdata; uskb = dev_alloc_skb(skb->len + 128); + if (!uskb) { + RT_TRACE(rtlpriv, + (COMP_INTR | COMP_RECV), + DBG_EMERG, + ("can't alloc rx skb\n")); + goto done; + } memcpy(IEEE80211_SKB_RXCB(uskb), &rx_status, sizeof(rx_status)); @@ -641,7 +648,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) new_skb = dev_alloc_skb(rtlpci->rxbuffersize); if (unlikely(!new_skb)) { RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV), - DBG_DMESG, + DBG_EMERG, ("can't alloc skb for rx\n")); goto done; } @@ -1066,9 +1073,9 @@ static int _rtl_pci_init_rx_ring(struct ieee80211_hw *hw) struct sk_buff *skb = dev_alloc_skb(rtlpci->rxbuffersize); u32 bufferaddress; - entry = &rtlpci->rx_ring[rx_queue_idx].desc[i]; if (!skb) return 0; + entry = &rtlpci->rx_ring[rx_queue_idx].desc[i]; /*skb->dev = dev; */ -- cgit v1.2.1 From 2221eca0a2c0f7f9918efdcaa52fb8e1adff991f Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Fri, 21 Jan 2011 16:24:23 -0800 Subject: atm: idt77105: fix fetch_stats() result copy_to_user() used PRIV(dev)->stats instead of local stats variable. Zero stats were returned to user in case of (zero != 0), also memcpy() was pointless. Signed-off-by: Vasiliy Kulikov Signed-off-by: David S. Miller --- drivers/atm/idt77105.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/atm/idt77105.c b/drivers/atm/idt77105.c index bca9cb89a118..487a54739854 100644 --- a/drivers/atm/idt77105.c +++ b/drivers/atm/idt77105.c @@ -151,7 +151,7 @@ static int fetch_stats(struct atm_dev *dev,struct idt77105_stats __user *arg,int spin_unlock_irqrestore(&idt77105_priv_lock, flags); if (arg == NULL) return 0; - return copy_to_user(arg, &PRIV(dev)->stats, + return copy_to_user(arg, &stats, sizeof(struct idt77105_stats)) ? -EFAULT : 0; } -- cgit v1.2.1 From 208028de5fa7732704d12cdd3f8fd45d2d8445e3 Mon Sep 17 00:00:00 2001 From: Daniel Walker Date: Tue, 18 Jan 2011 15:03:25 -0800 Subject: mmc: msm: fix dma usage not to use internal APIs Remove parts of this driver which use internal API calls. This replaces the calls as suggested by Russell King. Cc: Russell King - ARM Linux Signed-off-by: Daniel Walker --- drivers/mmc/host/msm_sdcc.c | 49 ++++++++++++++++++++------------------------- 1 file changed, 22 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c index 5decfd0bd61d..733d2333da36 100644 --- a/drivers/mmc/host/msm_sdcc.c +++ b/drivers/mmc/host/msm_sdcc.c @@ -383,14 +383,30 @@ static int msmsdcc_config_dma(struct msmsdcc_host *host, struct mmc_data *data) host->curr.user_pages = 0; box = &nc->cmd[0]; - for (i = 0; i < host->dma.num_ents; i++) { - box->cmd = CMD_MODE_BOX; - /* Initialize sg dma address */ - sg->dma_address = page_to_dma(mmc_dev(host->mmc), sg_page(sg)) - + sg->offset; + /* location of command block must be 64 bit aligned */ + BUG_ON(host->dma.cmd_busaddr & 0x07); + + nc->cmdptr = (host->dma.cmd_busaddr >> 3) | CMD_PTR_LP; + host->dma.hdr.cmdptr = DMOV_CMD_PTR_LIST | + DMOV_CMD_ADDR(host->dma.cmdptr_busaddr); + host->dma.hdr.complete_func = msmsdcc_dma_complete_func; + + n = dma_map_sg(mmc_dev(host->mmc), host->dma.sg, + host->dma.num_ents, host->dma.dir); + if (n == 0) { + printk(KERN_ERR "%s: Unable to map in all sg elements\n", + mmc_hostname(host->mmc)); + host->dma.sg = NULL; + host->dma.num_ents = 0; + return -ENOMEM; + } + + for_each_sg(host->dma.sg, sg, n, i) { + + box->cmd = CMD_MODE_BOX; - if (i == (host->dma.num_ents - 1)) + if (i == n - 1) box->cmd |= CMD_LC; rows = (sg_dma_len(sg) % MCI_FIFOSIZE) ? (sg_dma_len(sg) / MCI_FIFOSIZE) + 1 : @@ -418,27 +434,6 @@ static int msmsdcc_config_dma(struct msmsdcc_host *host, struct mmc_data *data) box->cmd |= CMD_DST_CRCI(crci); } box++; - sg++; - } - - /* location of command block must be 64 bit aligned */ - BUG_ON(host->dma.cmd_busaddr & 0x07); - - nc->cmdptr = (host->dma.cmd_busaddr >> 3) | CMD_PTR_LP; - host->dma.hdr.cmdptr = DMOV_CMD_PTR_LIST | - DMOV_CMD_ADDR(host->dma.cmdptr_busaddr); - host->dma.hdr.complete_func = msmsdcc_dma_complete_func; - - n = dma_map_sg(mmc_dev(host->mmc), host->dma.sg, - host->dma.num_ents, host->dma.dir); -/* dsb inside dma_map_sg will write nc out to mem as well */ - - if (n != host->dma.num_ents) { - printk(KERN_ERR "%s: Unable to map in all sg elements\n", - mmc_hostname(host->mmc)); - host->dma.sg = NULL; - host->dma.num_ents = 0; - return -ENOMEM; } return 0; -- cgit v1.2.1 From 727a99a576ba562e5074d54cfcc57a1ce101c240 Mon Sep 17 00:00:00 2001 From: Daniel Walker Date: Tue, 18 Jan 2011 10:14:33 -0800 Subject: drivers: mmc: msm: remove clock disable in probe The probe function adds the MMC host which can start accepting request immediately. There is an assumption here that no requests happen immediatly, but it's not always the case. This assumption can causes a BUG() when the clocks are disabled. The fix is to just remove the clock disable in the probe function. Signed-off-by: Daniel Walker --- drivers/mmc/host/msm_sdcc.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c index 733d2333da36..153ab977a013 100644 --- a/drivers/mmc/host/msm_sdcc.c +++ b/drivers/mmc/host/msm_sdcc.c @@ -1326,9 +1326,6 @@ msmsdcc_probe(struct platform_device *pdev) if (host->timer.function) pr_info("%s: Polling status mode enabled\n", mmc_hostname(mmc)); -#if BUSCLK_PWRSAVE - msmsdcc_disable_clocks(host, 1); -#endif return 0; cmd_irq_free: free_irq(cmd_irqres->start, host); -- cgit v1.2.1 From 03fd3cf5a179da12e6bee5e9d74b648aff68dc4c Mon Sep 17 00:00:00 2001 From: Kurt Van Dijck Date: Tue, 11 Jan 2011 04:32:31 +0000 Subject: can: add driver for Softing card This patch adds a driver for the platform:softing device. This will create (up to) 2 CAN network devices from 1 platform:softing device Signed-off-by: Kurt Van Dijck Acked-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/Kconfig | 2 + drivers/net/can/Makefile | 1 + drivers/net/can/softing/Kconfig | 16 + drivers/net/can/softing/Makefile | 5 + drivers/net/can/softing/softing.h | 167 ++++++ drivers/net/can/softing/softing_fw.c | 691 ++++++++++++++++++++++ drivers/net/can/softing/softing_main.c | 893 +++++++++++++++++++++++++++++ drivers/net/can/softing/softing_platform.h | 40 ++ 8 files changed, 1815 insertions(+) create mode 100644 drivers/net/can/softing/Kconfig create mode 100644 drivers/net/can/softing/Makefile create mode 100644 drivers/net/can/softing/softing.h create mode 100644 drivers/net/can/softing/softing_fw.c create mode 100644 drivers/net/can/softing/softing_main.c create mode 100644 drivers/net/can/softing/softing_platform.h (limited to 'drivers') diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index d5a9db60ade9..986195eaa57c 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -117,6 +117,8 @@ source "drivers/net/can/sja1000/Kconfig" source "drivers/net/can/usb/Kconfig" +source "drivers/net/can/softing/Kconfig" + config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" depends on CAN diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile index 07ca159ba3f9..53c82a71778e 100644 --- a/drivers/net/can/Makefile +++ b/drivers/net/can/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_CAN_DEV) += can-dev.o can-dev-y := dev.o obj-y += usb/ +obj-y += softing/ obj-$(CONFIG_CAN_SJA1000) += sja1000/ obj-$(CONFIG_CAN_MSCAN) += mscan/ diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig new file mode 100644 index 000000000000..072f337f42e3 --- /dev/null +++ b/drivers/net/can/softing/Kconfig @@ -0,0 +1,16 @@ +config CAN_SOFTING + tristate "Softing Gmbh CAN generic support" + depends on CAN_DEV + ---help--- + Support for CAN cards from Softing Gmbh & some cards + from Vector Gmbh. + Softing Gmbh CAN cards come with 1 or 2 physical busses. + Those cards typically use Dual Port RAM to communicate + with the host CPU. The interface is then identical for PCI + and PCMCIA cards. This driver operates on a platform device, + which has been created by softing_cs or softing_pci driver. + Warning: + The API of the card does not allow fine control per bus, but + controls the 2 busses on the card together. + As such, some actions (start/stop/busoff recovery) on 1 bus + must bring down the other bus too temporarily. diff --git a/drivers/net/can/softing/Makefile b/drivers/net/can/softing/Makefile new file mode 100644 index 000000000000..7db04452deb6 --- /dev/null +++ b/drivers/net/can/softing/Makefile @@ -0,0 +1,5 @@ + +softing-y := softing_main.o softing_fw.o +obj-$(CONFIG_CAN_SOFTING) += softing.o + +ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG diff --git a/drivers/net/can/softing/softing.h b/drivers/net/can/softing/softing.h new file mode 100644 index 000000000000..7ec9f4db3d52 --- /dev/null +++ b/drivers/net/can/softing/softing.h @@ -0,0 +1,167 @@ +/* + * softing common interfaces + * + * by Kurt Van Dijck, 2008-2010 + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "softing_platform.h" + +struct softing; + +struct softing_priv { + struct can_priv can; /* must be the first member! */ + struct net_device *netdev; + struct softing *card; + struct { + int pending; + /* variables wich hold the circular buffer */ + int echo_put; + int echo_get; + } tx; + struct can_bittiming_const btr_const; + int index; + uint8_t output; + uint16_t chip; +}; +#define netdev2softing(netdev) ((struct softing_priv *)netdev_priv(netdev)) + +struct softing { + const struct softing_platform_data *pdat; + struct platform_device *pdev; + struct net_device *net[2]; + spinlock_t spin; /* protect this structure & DPRAM access */ + ktime_t ts_ref; + ktime_t ts_overflow; /* timestamp overflow value, in ktime */ + + struct { + /* indication of firmware status */ + int up; + /* protection of the 'up' variable */ + struct mutex lock; + } fw; + struct { + int nr; + int requested; + int svc_count; + unsigned int dpram_position; + } irq; + struct { + int pending; + int last_bus; + /* + * keep the bus that last tx'd a message, + * in order to let every netdev queue resume + */ + } tx; + __iomem uint8_t *dpram; + unsigned long dpram_phys; + unsigned long dpram_size; + struct { + uint16_t fw_version, hw_version, license, serial; + uint16_t chip[2]; + unsigned int freq; /* remote cpu's operating frequency */ + } id; +}; + +extern int softing_default_output(struct net_device *netdev); + +extern ktime_t softing_raw2ktime(struct softing *card, u32 raw); + +extern int softing_chip_poweron(struct softing *card); + +extern int softing_bootloader_command(struct softing *card, int16_t cmd, + const char *msg); + +/* Load firmware after reset */ +extern int softing_load_fw(const char *file, struct softing *card, + __iomem uint8_t *virt, unsigned int size, int offset); + +/* Load final application firmware after bootloader */ +extern int softing_load_app_fw(const char *file, struct softing *card); + +/* + * enable or disable irq + * only called with fw.lock locked + */ +extern int softing_enable_irq(struct softing *card, int enable); + +/* start/stop 1 bus on card */ +extern int softing_startstop(struct net_device *netdev, int up); + +/* netif_rx() */ +extern int softing_netdev_rx(struct net_device *netdev, + const struct can_frame *msg, ktime_t ktime); + +/* SOFTING DPRAM mappings */ +#define DPRAM_RX 0x0000 + #define DPRAM_RX_SIZE 32 + #define DPRAM_RX_CNT 16 +#define DPRAM_RX_RD 0x0201 /* uint8_t */ +#define DPRAM_RX_WR 0x0205 /* uint8_t */ +#define DPRAM_RX_LOST 0x0207 /* uint8_t */ + +#define DPRAM_FCT_PARAM 0x0300 /* int16_t [20] */ +#define DPRAM_FCT_RESULT 0x0328 /* int16_t */ +#define DPRAM_FCT_HOST 0x032b /* uint16_t */ + +#define DPRAM_INFO_BUSSTATE 0x0331 /* uint16_t */ +#define DPRAM_INFO_BUSSTATE2 0x0335 /* uint16_t */ +#define DPRAM_INFO_ERRSTATE 0x0339 /* uint16_t */ +#define DPRAM_INFO_ERRSTATE2 0x033d /* uint16_t */ +#define DPRAM_RESET 0x0341 /* uint16_t */ +#define DPRAM_CLR_RECV_FIFO 0x0345 /* uint16_t */ +#define DPRAM_RESET_TIME 0x034d /* uint16_t */ +#define DPRAM_TIME 0x0350 /* uint64_t */ +#define DPRAM_WR_START 0x0358 /* uint8_t */ +#define DPRAM_WR_END 0x0359 /* uint8_t */ +#define DPRAM_RESET_RX_FIFO 0x0361 /* uint16_t */ +#define DPRAM_RESET_TX_FIFO 0x0364 /* uint8_t */ +#define DPRAM_READ_FIFO_LEVEL 0x0365 /* uint8_t */ +#define DPRAM_RX_FIFO_LEVEL 0x0366 /* uint16_t */ +#define DPRAM_TX_FIFO_LEVEL 0x0366 /* uint16_t */ + +#define DPRAM_TX 0x0400 /* uint16_t */ + #define DPRAM_TX_SIZE 16 + #define DPRAM_TX_CNT 32 +#define DPRAM_TX_RD 0x0601 /* uint8_t */ +#define DPRAM_TX_WR 0x0605 /* uint8_t */ + +#define DPRAM_COMMAND 0x07e0 /* uint16_t */ +#define DPRAM_RECEIPT 0x07f0 /* uint16_t */ +#define DPRAM_IRQ_TOHOST 0x07fe /* uint8_t */ +#define DPRAM_IRQ_TOCARD 0x07ff /* uint8_t */ + +#define DPRAM_V2_RESET 0x0e00 /* uint8_t */ +#define DPRAM_V2_IRQ_TOHOST 0x0e02 /* uint8_t */ + +#define TXMAX (DPRAM_TX_CNT - 1) + +/* DPRAM return codes */ +#define RES_NONE 0 +#define RES_OK 1 +#define RES_NOK 2 +#define RES_UNKNOWN 3 +/* DPRAM flags */ +#define CMD_TX 0x01 +#define CMD_ACK 0x02 +#define CMD_XTD 0x04 +#define CMD_RTR 0x08 +#define CMD_ERR 0x10 +#define CMD_BUS2 0x80 + +/* returned fifo entry bus state masks */ +#define SF_MASK_BUSOFF 0x80 +#define SF_MASK_EPASSIVE 0x60 + +/* bus states */ +#define STATE_BUSOFF 2 +#define STATE_EPASSIVE 1 +#define STATE_EACTIVE 0 diff --git a/drivers/net/can/softing/softing_fw.c b/drivers/net/can/softing/softing_fw.c new file mode 100644 index 000000000000..b520784fb197 --- /dev/null +++ b/drivers/net/can/softing/softing_fw.c @@ -0,0 +1,691 @@ +/* + * Copyright (C) 2008-2010 + * + * - Kurt Van Dijck, EIA Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include + +#include "softing.h" + +/* + * low level DPRAM command. + * Make sure that card->dpram[DPRAM_FCT_HOST] is preset + */ +static int _softing_fct_cmd(struct softing *card, int16_t cmd, uint16_t vector, + const char *msg) +{ + int ret; + unsigned long stamp; + + iowrite16(cmd, &card->dpram[DPRAM_FCT_PARAM]); + iowrite8(vector >> 8, &card->dpram[DPRAM_FCT_HOST + 1]); + iowrite8(vector, &card->dpram[DPRAM_FCT_HOST]); + /* be sure to flush this to the card */ + wmb(); + stamp = jiffies + 1 * HZ; + /* wait for card */ + do { + /* DPRAM_FCT_HOST is _not_ aligned */ + ret = ioread8(&card->dpram[DPRAM_FCT_HOST]) + + (ioread8(&card->dpram[DPRAM_FCT_HOST + 1]) << 8); + /* don't have any cached variables */ + rmb(); + if (ret == RES_OK) + /* read return-value now */ + return ioread16(&card->dpram[DPRAM_FCT_RESULT]); + + if ((ret != vector) || time_after(jiffies, stamp)) + break; + /* process context => relax */ + usleep_range(500, 10000); + } while (1); + + ret = (ret == RES_NONE) ? -ETIMEDOUT : -ECANCELED; + dev_alert(&card->pdev->dev, "firmware %s failed (%i)\n", msg, ret); + return ret; +} + +static int softing_fct_cmd(struct softing *card, int16_t cmd, const char *msg) +{ + int ret; + + ret = _softing_fct_cmd(card, cmd, 0, msg); + if (ret > 0) { + dev_alert(&card->pdev->dev, "%s returned %u\n", msg, ret); + ret = -EIO; + } + return ret; +} + +int softing_bootloader_command(struct softing *card, int16_t cmd, + const char *msg) +{ + int ret; + unsigned long stamp; + + iowrite16(RES_NONE, &card->dpram[DPRAM_RECEIPT]); + iowrite16(cmd, &card->dpram[DPRAM_COMMAND]); + /* be sure to flush this to the card */ + wmb(); + stamp = jiffies + 3 * HZ; + /* wait for card */ + do { + ret = ioread16(&card->dpram[DPRAM_RECEIPT]); + /* don't have any cached variables */ + rmb(); + if (ret == RES_OK) + return 0; + if (time_after(jiffies, stamp)) + break; + /* process context => relax */ + usleep_range(500, 10000); + } while (!signal_pending(current)); + + ret = (ret == RES_NONE) ? -ETIMEDOUT : -ECANCELED; + dev_alert(&card->pdev->dev, "bootloader %s failed (%i)\n", msg, ret); + return ret; +} + +static int fw_parse(const uint8_t **pmem, uint16_t *ptype, uint32_t *paddr, + uint16_t *plen, const uint8_t **pdat) +{ + uint16_t checksum[2]; + const uint8_t *mem; + const uint8_t *end; + + /* + * firmware records are a binary, unaligned stream composed of: + * uint16_t type; + * uint32_t addr; + * uint16_t len; + * uint8_t dat[len]; + * uint16_t checksum; + * all values in little endian. + * We could define a struct for this, with __attribute__((packed)), + * but would that solve the alignment in _all_ cases (cfr. the + * struct itself may be an odd address)? + * + * I chose to use leXX_to_cpup() since this solves both + * endianness & alignment. + */ + mem = *pmem; + *ptype = le16_to_cpup((void *)&mem[0]); + *paddr = le32_to_cpup((void *)&mem[2]); + *plen = le16_to_cpup((void *)&mem[6]); + *pdat = &mem[8]; + /* verify checksum */ + end = &mem[8 + *plen]; + checksum[0] = le16_to_cpup((void *)end); + for (checksum[1] = 0; mem < end; ++mem) + checksum[1] += *mem; + if (checksum[0] != checksum[1]) + return -EINVAL; + /* increment */ + *pmem += 10 + *plen; + return 0; +} + +int softing_load_fw(const char *file, struct softing *card, + __iomem uint8_t *dpram, unsigned int size, int offset) +{ + const struct firmware *fw; + int ret; + const uint8_t *mem, *end, *dat; + uint16_t type, len; + uint32_t addr; + uint8_t *buf = NULL; + int buflen = 0; + int8_t type_end = 0; + + ret = request_firmware(&fw, file, &card->pdev->dev); + if (ret < 0) + return ret; + dev_dbg(&card->pdev->dev, "%s, firmware(%s) got %u bytes" + ", offset %c0x%04x\n", + card->pdat->name, file, (unsigned int)fw->size, + (offset >= 0) ? '+' : '-', (unsigned int)abs(offset)); + /* parse the firmware */ + mem = fw->data; + end = &mem[fw->size]; + /* look for header record */ + ret = fw_parse(&mem, &type, &addr, &len, &dat); + if (ret < 0) + goto failed; + if (type != 0xffff) + goto failed; + if (strncmp("Structured Binary Format, Softing GmbH" , dat, len)) { + ret = -EINVAL; + goto failed; + } + /* ok, we had a header */ + while (mem < end) { + ret = fw_parse(&mem, &type, &addr, &len, &dat); + if (ret < 0) + goto failed; + if (type == 3) { + /* start address, not used here */ + continue; + } else if (type == 1) { + /* eof */ + type_end = 1; + break; + } else if (type != 0) { + ret = -EINVAL; + goto failed; + } + + if ((addr + len + offset) > size) + goto failed; + memcpy_toio(&dpram[addr + offset], dat, len); + /* be sure to flush caches from IO space */ + mb(); + if (len > buflen) { + /* align buflen */ + buflen = (len + (1024-1)) & ~(1024-1); + buf = krealloc(buf, buflen, GFP_KERNEL); + if (!buf) { + ret = -ENOMEM; + goto failed; + } + } + /* verify record data */ + memcpy_fromio(buf, &dpram[addr + offset], len); + if (memcmp(buf, dat, len)) { + /* is not ok */ + dev_alert(&card->pdev->dev, "DPRAM readback failed\n"); + ret = -EIO; + goto failed; + } + } + if (!type_end) + /* no end record seen */ + goto failed; + ret = 0; +failed: + kfree(buf); + release_firmware(fw); + if (ret < 0) + dev_info(&card->pdev->dev, "firmware %s failed\n", file); + return ret; +} + +int softing_load_app_fw(const char *file, struct softing *card) +{ + const struct firmware *fw; + const uint8_t *mem, *end, *dat; + int ret, j; + uint16_t type, len; + uint32_t addr, start_addr = 0; + unsigned int sum, rx_sum; + int8_t type_end = 0, type_entrypoint = 0; + + ret = request_firmware(&fw, file, &card->pdev->dev); + if (ret) { + dev_alert(&card->pdev->dev, "request_firmware(%s) got %i\n", + file, ret); + return ret; + } + dev_dbg(&card->pdev->dev, "firmware(%s) got %lu bytes\n", + file, (unsigned long)fw->size); + /* parse the firmware */ + mem = fw->data; + end = &mem[fw->size]; + /* look for header record */ + ret = fw_parse(&mem, &type, &addr, &len, &dat); + if (ret) + goto failed; + ret = -EINVAL; + if (type != 0xffff) { + dev_alert(&card->pdev->dev, "firmware starts with type 0x%x\n", + type); + goto failed; + } + if (strncmp("Structured Binary Format, Softing GmbH", dat, len)) { + dev_alert(&card->pdev->dev, "firmware string '%.*s' fault\n", + len, dat); + goto failed; + } + /* ok, we had a header */ + while (mem < end) { + ret = fw_parse(&mem, &type, &addr, &len, &dat); + if (ret) + goto failed; + + if (type == 3) { + /* start address */ + start_addr = addr; + type_entrypoint = 1; + continue; + } else if (type == 1) { + /* eof */ + type_end = 1; + break; + } else if (type != 0) { + dev_alert(&card->pdev->dev, + "unknown record type 0x%04x\n", type); + ret = -EINVAL; + goto failed; + } + + /* regualar data */ + for (sum = 0, j = 0; j < len; ++j) + sum += dat[j]; + /* work in 16bit (target) */ + sum &= 0xffff; + + memcpy_toio(&card->dpram[card->pdat->app.offs], dat, len); + iowrite32(card->pdat->app.offs + card->pdat->app.addr, + &card->dpram[DPRAM_COMMAND + 2]); + iowrite32(addr, &card->dpram[DPRAM_COMMAND + 6]); + iowrite16(len, &card->dpram[DPRAM_COMMAND + 10]); + iowrite8(1, &card->dpram[DPRAM_COMMAND + 12]); + ret = softing_bootloader_command(card, 1, "loading app."); + if (ret < 0) + goto failed; + /* verify checksum */ + rx_sum = ioread16(&card->dpram[DPRAM_RECEIPT + 2]); + if (rx_sum != sum) { + dev_alert(&card->pdev->dev, "SRAM seems to be damaged" + ", wanted 0x%04x, got 0x%04x\n", sum, rx_sum); + ret = -EIO; + goto failed; + } + } + if (!type_end || !type_entrypoint) + goto failed; + /* start application in card */ + iowrite32(start_addr, &card->dpram[DPRAM_COMMAND + 2]); + iowrite8(1, &card->dpram[DPRAM_COMMAND + 6]); + ret = softing_bootloader_command(card, 3, "start app."); + if (ret < 0) + goto failed; + ret = 0; +failed: + release_firmware(fw); + if (ret < 0) + dev_info(&card->pdev->dev, "firmware %s failed\n", file); + return ret; +} + +static int softing_reset_chip(struct softing *card) +{ + int ret; + + do { + /* reset chip */ + iowrite8(0, &card->dpram[DPRAM_RESET_RX_FIFO]); + iowrite8(0, &card->dpram[DPRAM_RESET_RX_FIFO+1]); + iowrite8(1, &card->dpram[DPRAM_RESET]); + iowrite8(0, &card->dpram[DPRAM_RESET+1]); + + ret = softing_fct_cmd(card, 0, "reset_can"); + if (!ret) + break; + if (signal_pending(current)) + /* don't wait any longer */ + break; + } while (1); + card->tx.pending = 0; + return ret; +} + +int softing_chip_poweron(struct softing *card) +{ + int ret; + /* sync */ + ret = _softing_fct_cmd(card, 99, 0x55, "sync-a"); + if (ret < 0) + goto failed; + + ret = _softing_fct_cmd(card, 99, 0xaa, "sync-b"); + if (ret < 0) + goto failed; + + ret = softing_reset_chip(card); + if (ret < 0) + goto failed; + /* get_serial */ + ret = softing_fct_cmd(card, 43, "get_serial_number"); + if (ret < 0) + goto failed; + card->id.serial = ioread32(&card->dpram[DPRAM_FCT_PARAM]); + /* get_version */ + ret = softing_fct_cmd(card, 12, "get_version"); + if (ret < 0) + goto failed; + card->id.fw_version = ioread16(&card->dpram[DPRAM_FCT_PARAM + 2]); + card->id.hw_version = ioread16(&card->dpram[DPRAM_FCT_PARAM + 4]); + card->id.license = ioread16(&card->dpram[DPRAM_FCT_PARAM + 6]); + card->id.chip[0] = ioread16(&card->dpram[DPRAM_FCT_PARAM + 8]); + card->id.chip[1] = ioread16(&card->dpram[DPRAM_FCT_PARAM + 10]); + return 0; +failed: + return ret; +} + +static void softing_initialize_timestamp(struct softing *card) +{ + uint64_t ovf; + + card->ts_ref = ktime_get(); + + /* 16MHz is the reference */ + ovf = 0x100000000ULL * 16; + do_div(ovf, card->pdat->freq ?: 16); + + card->ts_overflow = ktime_add_us(ktime_set(0, 0), ovf); +} + +ktime_t softing_raw2ktime(struct softing *card, u32 raw) +{ + uint64_t rawl; + ktime_t now, real_offset; + ktime_t target; + ktime_t tmp; + + now = ktime_get(); + real_offset = ktime_sub(ktime_get_real(), now); + + /* find nsec from card */ + rawl = raw * 16; + do_div(rawl, card->pdat->freq ?: 16); + target = ktime_add_us(card->ts_ref, rawl); + /* test for overflows */ + tmp = ktime_add(target, card->ts_overflow); + while (unlikely(ktime_to_ns(tmp) > ktime_to_ns(now))) { + card->ts_ref = ktime_add(card->ts_ref, card->ts_overflow); + target = tmp; + tmp = ktime_add(target, card->ts_overflow); + } + return ktime_add(target, real_offset); +} + +static inline int softing_error_reporting(struct net_device *netdev) +{ + struct softing_priv *priv = netdev_priv(netdev); + + return (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) + ? 1 : 0; +} + +int softing_startstop(struct net_device *dev, int up) +{ + int ret; + struct softing *card; + struct softing_priv *priv; + struct net_device *netdev; + int bus_bitmask_start; + int j, error_reporting; + struct can_frame msg; + const struct can_bittiming *bt; + + priv = netdev_priv(dev); + card = priv->card; + + if (!card->fw.up) + return -EIO; + + ret = mutex_lock_interruptible(&card->fw.lock); + if (ret) + return ret; + + bus_bitmask_start = 0; + if (dev && up) + /* prepare to start this bus as well */ + bus_bitmask_start |= (1 << priv->index); + /* bring netdevs down */ + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + netdev = card->net[j]; + if (!netdev) + continue; + priv = netdev_priv(netdev); + + if (dev != netdev) + netif_stop_queue(netdev); + + if (netif_running(netdev)) { + if (dev != netdev) + bus_bitmask_start |= (1 << j); + priv->tx.pending = 0; + priv->tx.echo_put = 0; + priv->tx.echo_get = 0; + /* + * this bus' may just have called open_candev() + * which is rather stupid to call close_candev() + * already + * but we may come here from busoff recovery too + * in which case the echo_skb _needs_ flushing too. + * just be sure to call open_candev() again + */ + close_candev(netdev); + } + priv->can.state = CAN_STATE_STOPPED; + } + card->tx.pending = 0; + + softing_enable_irq(card, 0); + ret = softing_reset_chip(card); + if (ret) + goto failed; + if (!bus_bitmask_start) + /* no busses to be brought up */ + goto card_done; + + if ((bus_bitmask_start & 1) && (bus_bitmask_start & 2) + && (softing_error_reporting(card->net[0]) + != softing_error_reporting(card->net[1]))) { + dev_alert(&card->pdev->dev, + "err_reporting flag differs for busses\n"); + goto invalid; + } + error_reporting = 0; + if (bus_bitmask_start & 1) { + netdev = card->net[0]; + priv = netdev_priv(netdev); + error_reporting += softing_error_reporting(netdev); + /* init chip 1 */ + bt = &priv->can.bittiming; + iowrite16(bt->brp, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(bt->sjw, &card->dpram[DPRAM_FCT_PARAM + 4]); + iowrite16(bt->phase_seg1 + bt->prop_seg, + &card->dpram[DPRAM_FCT_PARAM + 6]); + iowrite16(bt->phase_seg2, &card->dpram[DPRAM_FCT_PARAM + 8]); + iowrite16((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) ? 1 : 0, + &card->dpram[DPRAM_FCT_PARAM + 10]); + ret = softing_fct_cmd(card, 1, "initialize_chip[0]"); + if (ret < 0) + goto failed; + /* set mode */ + iowrite16(0, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(0, &card->dpram[DPRAM_FCT_PARAM + 4]); + ret = softing_fct_cmd(card, 3, "set_mode[0]"); + if (ret < 0) + goto failed; + /* set filter */ + /* 11bit id & mask */ + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(0x07ff, &card->dpram[DPRAM_FCT_PARAM + 4]); + /* 29bit id.lo & mask.lo & id.hi & mask.hi */ + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 6]); + iowrite16(0xffff, &card->dpram[DPRAM_FCT_PARAM + 8]); + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 10]); + iowrite16(0x1fff, &card->dpram[DPRAM_FCT_PARAM + 12]); + ret = softing_fct_cmd(card, 7, "set_filter[0]"); + if (ret < 0) + goto failed; + /* set output control */ + iowrite16(priv->output, &card->dpram[DPRAM_FCT_PARAM + 2]); + ret = softing_fct_cmd(card, 5, "set_output[0]"); + if (ret < 0) + goto failed; + } + if (bus_bitmask_start & 2) { + netdev = card->net[1]; + priv = netdev_priv(netdev); + error_reporting += softing_error_reporting(netdev); + /* init chip2 */ + bt = &priv->can.bittiming; + iowrite16(bt->brp, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(bt->sjw, &card->dpram[DPRAM_FCT_PARAM + 4]); + iowrite16(bt->phase_seg1 + bt->prop_seg, + &card->dpram[DPRAM_FCT_PARAM + 6]); + iowrite16(bt->phase_seg2, &card->dpram[DPRAM_FCT_PARAM + 8]); + iowrite16((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) ? 1 : 0, + &card->dpram[DPRAM_FCT_PARAM + 10]); + ret = softing_fct_cmd(card, 2, "initialize_chip[1]"); + if (ret < 0) + goto failed; + /* set mode2 */ + iowrite16(0, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(0, &card->dpram[DPRAM_FCT_PARAM + 4]); + ret = softing_fct_cmd(card, 4, "set_mode[1]"); + if (ret < 0) + goto failed; + /* set filter2 */ + /* 11bit id & mask */ + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(0x07ff, &card->dpram[DPRAM_FCT_PARAM + 4]); + /* 29bit id.lo & mask.lo & id.hi & mask.hi */ + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 6]); + iowrite16(0xffff, &card->dpram[DPRAM_FCT_PARAM + 8]); + iowrite16(0x0000, &card->dpram[DPRAM_FCT_PARAM + 10]); + iowrite16(0x1fff, &card->dpram[DPRAM_FCT_PARAM + 12]); + ret = softing_fct_cmd(card, 8, "set_filter[1]"); + if (ret < 0) + goto failed; + /* set output control2 */ + iowrite16(priv->output, &card->dpram[DPRAM_FCT_PARAM + 2]); + ret = softing_fct_cmd(card, 6, "set_output[1]"); + if (ret < 0) + goto failed; + } + /* enable_error_frame */ + /* + * Error reporting is switched off at the moment since + * the receiving of them is not yet 100% verified + * This should be enabled sooner or later + * + if (error_reporting) { + ret = softing_fct_cmd(card, 51, "enable_error_frame"); + if (ret < 0) + goto failed; + } + */ + /* initialize interface */ + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 2]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 4]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 6]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 8]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 10]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 12]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 14]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 16]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 18]); + iowrite16(1, &card->dpram[DPRAM_FCT_PARAM + 20]); + ret = softing_fct_cmd(card, 17, "initialize_interface"); + if (ret < 0) + goto failed; + /* enable_fifo */ + ret = softing_fct_cmd(card, 36, "enable_fifo"); + if (ret < 0) + goto failed; + /* enable fifo tx ack */ + ret = softing_fct_cmd(card, 13, "fifo_tx_ack[0]"); + if (ret < 0) + goto failed; + /* enable fifo tx ack2 */ + ret = softing_fct_cmd(card, 14, "fifo_tx_ack[1]"); + if (ret < 0) + goto failed; + /* start_chip */ + ret = softing_fct_cmd(card, 11, "start_chip"); + if (ret < 0) + goto failed; + iowrite8(0, &card->dpram[DPRAM_INFO_BUSSTATE]); + iowrite8(0, &card->dpram[DPRAM_INFO_BUSSTATE2]); + if (card->pdat->generation < 2) { + iowrite8(0, &card->dpram[DPRAM_V2_IRQ_TOHOST]); + /* flush the DPRAM caches */ + wmb(); + } + + softing_initialize_timestamp(card); + + /* + * do socketcan notifications/status changes + * from here, no errors should occur, or the failed: part + * must be reviewed + */ + memset(&msg, 0, sizeof(msg)); + msg.can_id = CAN_ERR_FLAG | CAN_ERR_RESTARTED; + msg.can_dlc = CAN_ERR_DLC; + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + if (!(bus_bitmask_start & (1 << j))) + continue; + netdev = card->net[j]; + if (!netdev) + continue; + priv = netdev_priv(netdev); + priv->can.state = CAN_STATE_ERROR_ACTIVE; + open_candev(netdev); + if (dev != netdev) { + /* notify other busses on the restart */ + softing_netdev_rx(netdev, &msg, ktime_set(0, 0)); + ++priv->can.can_stats.restarts; + } + netif_wake_queue(netdev); + } + + /* enable interrupts */ + ret = softing_enable_irq(card, 1); + if (ret) + goto failed; +card_done: + mutex_unlock(&card->fw.lock); + return 0; +invalid: + ret = -EINVAL; +failed: + softing_enable_irq(card, 0); + softing_reset_chip(card); + mutex_unlock(&card->fw.lock); + /* bring all other interfaces down */ + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + netdev = card->net[j]; + if (!netdev) + continue; + dev_close(netdev); + } + return ret; +} + +int softing_default_output(struct net_device *netdev) +{ + struct softing_priv *priv = netdev_priv(netdev); + struct softing *card = priv->card; + + switch (priv->chip) { + case 1000: + return (card->pdat->generation < 2) ? 0xfb : 0xfa; + case 5: + return 0x60; + default: + return 0x40; + } +} diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c new file mode 100644 index 000000000000..5157e15e96eb --- /dev/null +++ b/drivers/net/can/softing/softing_main.c @@ -0,0 +1,893 @@ +/* + * Copyright (C) 2008-2010 + * + * - Kurt Van Dijck, EIA Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include "softing.h" + +#define TX_ECHO_SKB_MAX (((TXMAX+1)/2)-1) + +/* + * test is a specific CAN netdev + * is online (ie. up 'n running, not sleeping, not busoff + */ +static inline int canif_is_active(struct net_device *netdev) +{ + struct can_priv *can = netdev_priv(netdev); + + if (!netif_running(netdev)) + return 0; + return (can->state <= CAN_STATE_ERROR_PASSIVE); +} + +/* reset DPRAM */ +static inline void softing_set_reset_dpram(struct softing *card) +{ + if (card->pdat->generation >= 2) { + spin_lock_bh(&card->spin); + iowrite8(ioread8(&card->dpram[DPRAM_V2_RESET]) & ~1, + &card->dpram[DPRAM_V2_RESET]); + spin_unlock_bh(&card->spin); + } +} + +static inline void softing_clr_reset_dpram(struct softing *card) +{ + if (card->pdat->generation >= 2) { + spin_lock_bh(&card->spin); + iowrite8(ioread8(&card->dpram[DPRAM_V2_RESET]) | 1, + &card->dpram[DPRAM_V2_RESET]); + spin_unlock_bh(&card->spin); + } +} + +/* trigger the tx queue-ing */ +static netdev_tx_t softing_netdev_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct softing_priv *priv = netdev_priv(dev); + struct softing *card = priv->card; + int ret; + uint8_t *ptr; + uint8_t fifo_wr, fifo_rd; + struct can_frame *cf = (struct can_frame *)skb->data; + uint8_t buf[DPRAM_TX_SIZE]; + + if (can_dropped_invalid_skb(dev, skb)) + return NETDEV_TX_OK; + + spin_lock(&card->spin); + + ret = NETDEV_TX_BUSY; + if (!card->fw.up || + (card->tx.pending >= TXMAX) || + (priv->tx.pending >= TX_ECHO_SKB_MAX)) + goto xmit_done; + fifo_wr = ioread8(&card->dpram[DPRAM_TX_WR]); + fifo_rd = ioread8(&card->dpram[DPRAM_TX_RD]); + if (fifo_wr == fifo_rd) + /* fifo full */ + goto xmit_done; + memset(buf, 0, sizeof(buf)); + ptr = buf; + *ptr = CMD_TX; + if (cf->can_id & CAN_RTR_FLAG) + *ptr |= CMD_RTR; + if (cf->can_id & CAN_EFF_FLAG) + *ptr |= CMD_XTD; + if (priv->index) + *ptr |= CMD_BUS2; + ++ptr; + *ptr++ = cf->can_dlc; + *ptr++ = (cf->can_id >> 0); + *ptr++ = (cf->can_id >> 8); + if (cf->can_id & CAN_EFF_FLAG) { + *ptr++ = (cf->can_id >> 16); + *ptr++ = (cf->can_id >> 24); + } else { + /* increment 1, not 2 as you might think */ + ptr += 1; + } + if (!(cf->can_id & CAN_RTR_FLAG)) + memcpy(ptr, &cf->data[0], cf->can_dlc); + memcpy_toio(&card->dpram[DPRAM_TX + DPRAM_TX_SIZE * fifo_wr], + buf, DPRAM_TX_SIZE); + if (++fifo_wr >= DPRAM_TX_CNT) + fifo_wr = 0; + iowrite8(fifo_wr, &card->dpram[DPRAM_TX_WR]); + card->tx.last_bus = priv->index; + ++card->tx.pending; + ++priv->tx.pending; + can_put_echo_skb(skb, dev, priv->tx.echo_put); + ++priv->tx.echo_put; + if (priv->tx.echo_put >= TX_ECHO_SKB_MAX) + priv->tx.echo_put = 0; + /* can_put_echo_skb() saves the skb, safe to return TX_OK */ + ret = NETDEV_TX_OK; +xmit_done: + spin_unlock(&card->spin); + if (card->tx.pending >= TXMAX) { + int j; + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + if (card->net[j]) + netif_stop_queue(card->net[j]); + } + } + if (ret != NETDEV_TX_OK) + netif_stop_queue(dev); + + return ret; +} + +/* + * shortcut for skb delivery + */ +int softing_netdev_rx(struct net_device *netdev, const struct can_frame *msg, + ktime_t ktime) +{ + struct sk_buff *skb; + struct can_frame *cf; + + skb = alloc_can_skb(netdev, &cf); + if (!skb) + return -ENOMEM; + memcpy(cf, msg, sizeof(*msg)); + skb->tstamp = ktime; + return netif_rx(skb); +} + +/* + * softing_handle_1 + * pop 1 entry from the DPRAM queue, and process + */ +static int softing_handle_1(struct softing *card) +{ + struct net_device *netdev; + struct softing_priv *priv; + ktime_t ktime; + struct can_frame msg; + int cnt = 0, lost_msg; + uint8_t fifo_rd, fifo_wr, cmd; + uint8_t *ptr; + uint32_t tmp_u32; + uint8_t buf[DPRAM_RX_SIZE]; + + memset(&msg, 0, sizeof(msg)); + /* test for lost msgs */ + lost_msg = ioread8(&card->dpram[DPRAM_RX_LOST]); + if (lost_msg) { + int j; + /* reset condition */ + iowrite8(0, &card->dpram[DPRAM_RX_LOST]); + /* prepare msg */ + msg.can_id = CAN_ERR_FLAG | CAN_ERR_CRTL; + msg.can_dlc = CAN_ERR_DLC; + msg.data[1] = CAN_ERR_CRTL_RX_OVERFLOW; + /* + * service to all busses, we don't know which it was applicable + * but only service busses that are online + */ + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + netdev = card->net[j]; + if (!netdev) + continue; + if (!canif_is_active(netdev)) + /* a dead bus has no overflows */ + continue; + ++netdev->stats.rx_over_errors; + softing_netdev_rx(netdev, &msg, ktime_set(0, 0)); + } + /* prepare for other use */ + memset(&msg, 0, sizeof(msg)); + ++cnt; + } + + fifo_rd = ioread8(&card->dpram[DPRAM_RX_RD]); + fifo_wr = ioread8(&card->dpram[DPRAM_RX_WR]); + + if (++fifo_rd >= DPRAM_RX_CNT) + fifo_rd = 0; + if (fifo_wr == fifo_rd) + return cnt; + + memcpy_fromio(buf, &card->dpram[DPRAM_RX + DPRAM_RX_SIZE*fifo_rd], + DPRAM_RX_SIZE); + mb(); + /* trigger dual port RAM */ + iowrite8(fifo_rd, &card->dpram[DPRAM_RX_RD]); + + ptr = buf; + cmd = *ptr++; + if (cmd == 0xff) + /* not quite usefull, probably the card has got out */ + return 0; + netdev = card->net[0]; + if (cmd & CMD_BUS2) + netdev = card->net[1]; + priv = netdev_priv(netdev); + + if (cmd & CMD_ERR) { + uint8_t can_state, state; + + state = *ptr++; + + msg.can_id = CAN_ERR_FLAG; + msg.can_dlc = CAN_ERR_DLC; + + if (state & SF_MASK_BUSOFF) { + can_state = CAN_STATE_BUS_OFF; + msg.can_id |= CAN_ERR_BUSOFF; + state = STATE_BUSOFF; + } else if (state & SF_MASK_EPASSIVE) { + can_state = CAN_STATE_ERROR_PASSIVE; + msg.can_id |= CAN_ERR_CRTL; + msg.data[1] = CAN_ERR_CRTL_TX_PASSIVE; + state = STATE_EPASSIVE; + } else { + can_state = CAN_STATE_ERROR_ACTIVE; + msg.can_id |= CAN_ERR_CRTL; + state = STATE_EACTIVE; + } + /* update DPRAM */ + iowrite8(state, &card->dpram[priv->index ? + DPRAM_INFO_BUSSTATE2 : DPRAM_INFO_BUSSTATE]); + /* timestamp */ + tmp_u32 = le32_to_cpup((void *)ptr); + ptr += 4; + ktime = softing_raw2ktime(card, tmp_u32); + + ++netdev->stats.rx_errors; + /* update internal status */ + if (can_state != priv->can.state) { + priv->can.state = can_state; + if (can_state == CAN_STATE_ERROR_PASSIVE) + ++priv->can.can_stats.error_passive; + else if (can_state == CAN_STATE_BUS_OFF) { + /* this calls can_close_cleanup() */ + can_bus_off(netdev); + netif_stop_queue(netdev); + } + /* trigger socketcan */ + softing_netdev_rx(netdev, &msg, ktime); + } + + } else { + if (cmd & CMD_RTR) + msg.can_id |= CAN_RTR_FLAG; + msg.can_dlc = get_can_dlc(*ptr++); + if (cmd & CMD_XTD) { + msg.can_id |= CAN_EFF_FLAG; + msg.can_id |= le32_to_cpup((void *)ptr); + ptr += 4; + } else { + msg.can_id |= le16_to_cpup((void *)ptr); + ptr += 2; + } + /* timestamp */ + tmp_u32 = le32_to_cpup((void *)ptr); + ptr += 4; + ktime = softing_raw2ktime(card, tmp_u32); + if (!(msg.can_id & CAN_RTR_FLAG)) + memcpy(&msg.data[0], ptr, 8); + ptr += 8; + /* update socket */ + if (cmd & CMD_ACK) { + /* acknowledge, was tx msg */ + struct sk_buff *skb; + skb = priv->can.echo_skb[priv->tx.echo_get]; + if (skb) + skb->tstamp = ktime; + can_get_echo_skb(netdev, priv->tx.echo_get); + ++priv->tx.echo_get; + if (priv->tx.echo_get >= TX_ECHO_SKB_MAX) + priv->tx.echo_get = 0; + if (priv->tx.pending) + --priv->tx.pending; + if (card->tx.pending) + --card->tx.pending; + ++netdev->stats.tx_packets; + if (!(msg.can_id & CAN_RTR_FLAG)) + netdev->stats.tx_bytes += msg.can_dlc; + } else { + int ret; + + ret = softing_netdev_rx(netdev, &msg, ktime); + if (ret == NET_RX_SUCCESS) { + ++netdev->stats.rx_packets; + if (!(msg.can_id & CAN_RTR_FLAG)) + netdev->stats.rx_bytes += msg.can_dlc; + } else { + ++netdev->stats.rx_dropped; + } + } + } + ++cnt; + return cnt; +} + +/* + * real interrupt handler + */ +static irqreturn_t softing_irq_thread(int irq, void *dev_id) +{ + struct softing *card = (struct softing *)dev_id; + struct net_device *netdev; + struct softing_priv *priv; + int j, offset, work_done; + + work_done = 0; + spin_lock_bh(&card->spin); + while (softing_handle_1(card) > 0) { + ++card->irq.svc_count; + ++work_done; + } + spin_unlock_bh(&card->spin); + /* resume tx queue's */ + offset = card->tx.last_bus; + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + if (card->tx.pending >= TXMAX) + break; + netdev = card->net[(j + offset + 1) % card->pdat->nbus]; + if (!netdev) + continue; + priv = netdev_priv(netdev); + if (!canif_is_active(netdev)) + /* it makes no sense to wake dead busses */ + continue; + if (priv->tx.pending >= TX_ECHO_SKB_MAX) + continue; + ++work_done; + netif_wake_queue(netdev); + } + return work_done ? IRQ_HANDLED : IRQ_NONE; +} + +/* + * interrupt routines: + * schedule the 'real interrupt handler' + */ +static irqreturn_t softing_irq_v2(int irq, void *dev_id) +{ + struct softing *card = (struct softing *)dev_id; + uint8_t ir; + + ir = ioread8(&card->dpram[DPRAM_V2_IRQ_TOHOST]); + iowrite8(0, &card->dpram[DPRAM_V2_IRQ_TOHOST]); + return (1 == ir) ? IRQ_WAKE_THREAD : IRQ_NONE; +} + +static irqreturn_t softing_irq_v1(int irq, void *dev_id) +{ + struct softing *card = (struct softing *)dev_id; + uint8_t ir; + + ir = ioread8(&card->dpram[DPRAM_IRQ_TOHOST]); + iowrite8(0, &card->dpram[DPRAM_IRQ_TOHOST]); + return ir ? IRQ_WAKE_THREAD : IRQ_NONE; +} + +/* + * netdev/candev inter-operability + */ +static int softing_netdev_open(struct net_device *ndev) +{ + int ret; + + /* check or determine and set bittime */ + ret = open_candev(ndev); + if (!ret) + ret = softing_startstop(ndev, 1); + return ret; +} + +static int softing_netdev_stop(struct net_device *ndev) +{ + int ret; + + netif_stop_queue(ndev); + + /* softing cycle does close_candev() */ + ret = softing_startstop(ndev, 0); + return ret; +} + +static int softing_candev_set_mode(struct net_device *ndev, enum can_mode mode) +{ + int ret; + + switch (mode) { + case CAN_MODE_START: + /* softing_startstop does close_candev() */ + ret = softing_startstop(ndev, 1); + return ret; + case CAN_MODE_STOP: + case CAN_MODE_SLEEP: + return -EOPNOTSUPP; + } + return 0; +} + +/* + * Softing device management helpers + */ +int softing_enable_irq(struct softing *card, int enable) +{ + int ret; + + if (!card->irq.nr) { + return 0; + } else if (card->irq.requested && !enable) { + free_irq(card->irq.nr, card); + card->irq.requested = 0; + } else if (!card->irq.requested && enable) { + ret = request_threaded_irq(card->irq.nr, + (card->pdat->generation >= 2) ? + softing_irq_v2 : softing_irq_v1, + softing_irq_thread, IRQF_SHARED, + dev_name(&card->pdev->dev), card); + if (ret) { + dev_alert(&card->pdev->dev, + "request_threaded_irq(%u) failed\n", + card->irq.nr); + return ret; + } + card->irq.requested = 1; + } + return 0; +} + +static void softing_card_shutdown(struct softing *card) +{ + int fw_up = 0; + + if (mutex_lock_interruptible(&card->fw.lock)) + /* return -ERESTARTSYS */; + fw_up = card->fw.up; + card->fw.up = 0; + + if (card->irq.requested && card->irq.nr) { + free_irq(card->irq.nr, card); + card->irq.requested = 0; + } + if (fw_up) { + if (card->pdat->enable_irq) + card->pdat->enable_irq(card->pdev, 0); + softing_set_reset_dpram(card); + if (card->pdat->reset) + card->pdat->reset(card->pdev, 1); + } + mutex_unlock(&card->fw.lock); +} + +static __devinit int softing_card_boot(struct softing *card) +{ + int ret, j; + static const uint8_t stream[] = { + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, }; + unsigned char back[sizeof(stream)]; + + if (mutex_lock_interruptible(&card->fw.lock)) + return -ERESTARTSYS; + if (card->fw.up) { + mutex_unlock(&card->fw.lock); + return 0; + } + /* reset board */ + if (card->pdat->enable_irq) + card->pdat->enable_irq(card->pdev, 1); + /* boot card */ + softing_set_reset_dpram(card); + if (card->pdat->reset) + card->pdat->reset(card->pdev, 1); + for (j = 0; (j + sizeof(stream)) < card->dpram_size; + j += sizeof(stream)) { + + memcpy_toio(&card->dpram[j], stream, sizeof(stream)); + /* flush IO cache */ + mb(); + memcpy_fromio(back, &card->dpram[j], sizeof(stream)); + + if (!memcmp(back, stream, sizeof(stream))) + continue; + /* memory is not equal */ + dev_alert(&card->pdev->dev, "dpram failed at 0x%04x\n", j); + ret = -EIO; + goto failed; + } + wmb(); + /* load boot firmware */ + ret = softing_load_fw(card->pdat->boot.fw, card, card->dpram, + card->dpram_size, + card->pdat->boot.offs - card->pdat->boot.addr); + if (ret < 0) + goto failed; + /* load loader firmware */ + ret = softing_load_fw(card->pdat->load.fw, card, card->dpram, + card->dpram_size, + card->pdat->load.offs - card->pdat->load.addr); + if (ret < 0) + goto failed; + + if (card->pdat->reset) + card->pdat->reset(card->pdev, 0); + softing_clr_reset_dpram(card); + ret = softing_bootloader_command(card, 0, "card boot"); + if (ret < 0) + goto failed; + ret = softing_load_app_fw(card->pdat->app.fw, card); + if (ret < 0) + goto failed; + + ret = softing_chip_poweron(card); + if (ret < 0) + goto failed; + + card->fw.up = 1; + mutex_unlock(&card->fw.lock); + return 0; +failed: + card->fw.up = 0; + if (card->pdat->enable_irq) + card->pdat->enable_irq(card->pdev, 0); + softing_set_reset_dpram(card); + if (card->pdat->reset) + card->pdat->reset(card->pdev, 1); + mutex_unlock(&card->fw.lock); + return ret; +} + +/* + * netdev sysfs + */ +static ssize_t show_channel(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct net_device *ndev = to_net_dev(dev); + struct softing_priv *priv = netdev2softing(ndev); + + return sprintf(buf, "%i\n", priv->index); +} + +static ssize_t show_chip(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct net_device *ndev = to_net_dev(dev); + struct softing_priv *priv = netdev2softing(ndev); + + return sprintf(buf, "%i\n", priv->chip); +} + +static ssize_t show_output(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct net_device *ndev = to_net_dev(dev); + struct softing_priv *priv = netdev2softing(ndev); + + return sprintf(buf, "0x%02x\n", priv->output); +} + +static ssize_t store_output(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct net_device *ndev = to_net_dev(dev); + struct softing_priv *priv = netdev2softing(ndev); + struct softing *card = priv->card; + unsigned long val; + int ret; + + ret = strict_strtoul(buf, 0, &val); + if (ret < 0) + return ret; + val &= 0xFF; + + ret = mutex_lock_interruptible(&card->fw.lock); + if (ret) + return -ERESTARTSYS; + if (netif_running(ndev)) { + mutex_unlock(&card->fw.lock); + return -EBUSY; + } + priv->output = val; + mutex_unlock(&card->fw.lock); + return count; +} + +static const DEVICE_ATTR(channel, S_IRUGO, show_channel, NULL); +static const DEVICE_ATTR(chip, S_IRUGO, show_chip, NULL); +static const DEVICE_ATTR(output, S_IRUGO | S_IWUSR, show_output, store_output); + +static const struct attribute *const netdev_sysfs_attrs[] = { + &dev_attr_channel.attr, + &dev_attr_chip.attr, + &dev_attr_output.attr, + NULL, +}; +static const struct attribute_group netdev_sysfs_group = { + .name = NULL, + .attrs = (struct attribute **)netdev_sysfs_attrs, +}; + +static const struct net_device_ops softing_netdev_ops = { + .ndo_open = softing_netdev_open, + .ndo_stop = softing_netdev_stop, + .ndo_start_xmit = softing_netdev_start_xmit, +}; + +static const struct can_bittiming_const softing_btr_const = { + .tseg1_min = 1, + .tseg1_max = 16, + .tseg2_min = 1, + .tseg2_max = 8, + .sjw_max = 4, /* overruled */ + .brp_min = 1, + .brp_max = 32, /* overruled */ + .brp_inc = 1, +}; + + +static __devinit struct net_device *softing_netdev_create(struct softing *card, + uint16_t chip_id) +{ + struct net_device *netdev; + struct softing_priv *priv; + + netdev = alloc_candev(sizeof(*priv), TX_ECHO_SKB_MAX); + if (!netdev) { + dev_alert(&card->pdev->dev, "alloc_candev failed\n"); + return NULL; + } + priv = netdev_priv(netdev); + priv->netdev = netdev; + priv->card = card; + memcpy(&priv->btr_const, &softing_btr_const, sizeof(priv->btr_const)); + priv->btr_const.brp_max = card->pdat->max_brp; + priv->btr_const.sjw_max = card->pdat->max_sjw; + priv->can.bittiming_const = &priv->btr_const; + priv->can.clock.freq = 8000000; + priv->chip = chip_id; + priv->output = softing_default_output(netdev); + SET_NETDEV_DEV(netdev, &card->pdev->dev); + + netdev->flags |= IFF_ECHO; + netdev->netdev_ops = &softing_netdev_ops; + priv->can.do_set_mode = softing_candev_set_mode; + priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES; + + return netdev; +} + +static __devinit int softing_netdev_register(struct net_device *netdev) +{ + int ret; + + netdev->sysfs_groups[0] = &netdev_sysfs_group; + ret = register_candev(netdev); + if (ret) { + dev_alert(&netdev->dev, "register failed\n"); + return ret; + } + return 0; +} + +static void softing_netdev_cleanup(struct net_device *netdev) +{ + unregister_candev(netdev); + free_candev(netdev); +} + +/* + * sysfs for Platform device + */ +#define DEV_ATTR_RO(name, member) \ +static ssize_t show_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct softing *card = platform_get_drvdata(to_platform_device(dev)); \ + return sprintf(buf, "%u\n", card->member); \ +} \ +static DEVICE_ATTR(name, 0444, show_##name, NULL) + +#define DEV_ATTR_RO_STR(name, member) \ +static ssize_t show_##name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct softing *card = platform_get_drvdata(to_platform_device(dev)); \ + return sprintf(buf, "%s\n", card->member); \ +} \ +static DEVICE_ATTR(name, 0444, show_##name, NULL) + +DEV_ATTR_RO(serial, id.serial); +DEV_ATTR_RO_STR(firmware, pdat->app.fw); +DEV_ATTR_RO(firmware_version, id.fw_version); +DEV_ATTR_RO_STR(hardware, pdat->name); +DEV_ATTR_RO(hardware_version, id.hw_version); +DEV_ATTR_RO(license, id.license); +DEV_ATTR_RO(frequency, id.freq); +DEV_ATTR_RO(txpending, tx.pending); + +static struct attribute *softing_pdev_attrs[] = { + &dev_attr_serial.attr, + &dev_attr_firmware.attr, + &dev_attr_firmware_version.attr, + &dev_attr_hardware.attr, + &dev_attr_hardware_version.attr, + &dev_attr_license.attr, + &dev_attr_frequency.attr, + &dev_attr_txpending.attr, + NULL, +}; + +static const struct attribute_group softing_pdev_group = { + .name = NULL, + .attrs = softing_pdev_attrs, +}; + +/* + * platform driver + */ +static __devexit int softing_pdev_remove(struct platform_device *pdev) +{ + struct softing *card = platform_get_drvdata(pdev); + int j; + + /* first, disable card*/ + softing_card_shutdown(card); + + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + if (!card->net[j]) + continue; + softing_netdev_cleanup(card->net[j]); + card->net[j] = NULL; + } + sysfs_remove_group(&pdev->dev.kobj, &softing_pdev_group); + + iounmap(card->dpram); + kfree(card); + return 0; +} + +static __devinit int softing_pdev_probe(struct platform_device *pdev) +{ + const struct softing_platform_data *pdat = pdev->dev.platform_data; + struct softing *card; + struct net_device *netdev; + struct softing_priv *priv; + struct resource *pres; + int ret; + int j; + + if (!pdat) { + dev_warn(&pdev->dev, "no platform data\n"); + return -EINVAL; + } + if (pdat->nbus > ARRAY_SIZE(card->net)) { + dev_warn(&pdev->dev, "%u nets??\n", pdat->nbus); + return -EINVAL; + } + + card = kzalloc(sizeof(*card), GFP_KERNEL); + if (!card) + return -ENOMEM; + card->pdat = pdat; + card->pdev = pdev; + platform_set_drvdata(pdev, card); + mutex_init(&card->fw.lock); + spin_lock_init(&card->spin); + + ret = -EINVAL; + pres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!pres) + goto platform_resource_failed;; + card->dpram_phys = pres->start; + card->dpram_size = pres->end - pres->start + 1; + card->dpram = ioremap_nocache(card->dpram_phys, card->dpram_size); + if (!card->dpram) { + dev_alert(&card->pdev->dev, "dpram ioremap failed\n"); + goto ioremap_failed; + } + + pres = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (pres) + card->irq.nr = pres->start; + + /* reset card */ + ret = softing_card_boot(card); + if (ret < 0) { + dev_alert(&pdev->dev, "failed to boot\n"); + goto boot_failed; + } + + /* only now, the chip's are known */ + card->id.freq = card->pdat->freq; + + ret = sysfs_create_group(&pdev->dev.kobj, &softing_pdev_group); + if (ret < 0) { + dev_alert(&card->pdev->dev, "sysfs failed\n"); + goto sysfs_failed; + } + + ret = -ENOMEM; + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + card->net[j] = netdev = + softing_netdev_create(card, card->id.chip[j]); + if (!netdev) { + dev_alert(&pdev->dev, "failed to make can[%i]", j); + goto netdev_failed; + } + priv = netdev_priv(card->net[j]); + priv->index = j; + ret = softing_netdev_register(netdev); + if (ret) { + free_candev(netdev); + card->net[j] = NULL; + dev_alert(&card->pdev->dev, + "failed to register can[%i]\n", j); + goto netdev_failed; + } + } + dev_info(&card->pdev->dev, "%s ready.\n", card->pdat->name); + return 0; + +netdev_failed: + for (j = 0; j < ARRAY_SIZE(card->net); ++j) { + if (!card->net[j]) + continue; + softing_netdev_cleanup(card->net[j]); + } + sysfs_remove_group(&pdev->dev.kobj, &softing_pdev_group); +sysfs_failed: + softing_card_shutdown(card); +boot_failed: + iounmap(card->dpram); +ioremap_failed: +platform_resource_failed: + kfree(card); + return ret; +} + +static struct platform_driver softing_driver = { + .driver = { + .name = "softing", + .owner = THIS_MODULE, + }, + .probe = softing_pdev_probe, + .remove = __devexit_p(softing_pdev_remove), +}; + +MODULE_ALIAS("platform:softing"); + +static int __init softing_start(void) +{ + return platform_driver_register(&softing_driver); +} + +static void __exit softing_stop(void) +{ + platform_driver_unregister(&softing_driver); +} + +module_init(softing_start); +module_exit(softing_stop); + +MODULE_DESCRIPTION("Softing DPRAM CAN driver"); +MODULE_AUTHOR("Kurt Van Dijck "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/can/softing/softing_platform.h b/drivers/net/can/softing/softing_platform.h new file mode 100644 index 000000000000..ebbf69815623 --- /dev/null +++ b/drivers/net/can/softing/softing_platform.h @@ -0,0 +1,40 @@ + +#include + +#ifndef _SOFTING_DEVICE_H_ +#define _SOFTING_DEVICE_H_ + +/* softing firmware directory prefix */ +#define fw_dir "softing-4.6/" + +struct softing_platform_data { + unsigned int manf; + unsigned int prod; + /* + * generation + * 1st with NEC or SJA1000 + * 8bit, exclusive interrupt, ... + * 2nd only SJA1000 + * 16bit, shared interrupt + */ + int generation; + int nbus; /* # busses on device */ + unsigned int freq; /* operating frequency in Hz */ + unsigned int max_brp; + unsigned int max_sjw; + unsigned long dpram_size; + const char *name; + struct { + unsigned long offs; + unsigned long addr; + const char *fw; + } boot, load, app; + /* + * reset() function + * bring pdev in or out of reset, depending on value + */ + int (*reset)(struct platform_device *pdev, int value); + int (*enable_irq)(struct platform_device *pdev, int value); +}; + +#endif -- cgit v1.2.1 From 0a0b7a5f7a043d86a95990d3227cf7e823ae52ac Mon Sep 17 00:00:00 2001 From: Kurt Van Dijck Date: Tue, 11 Jan 2011 04:34:28 +0000 Subject: can: add driver for Softing card This patch adds the driver that creates a platform:softing device from a pcmcia_device Note: the Kconfig indicates a dependency on the softing.ko driver, but this is purely to make configuration intuitive. This driver will work independent, but no CAN network devices appear until softing.ko is loaded too. Signed-off-by: Kurt Van Dijck Acked-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/softing/Kconfig | 14 ++ drivers/net/can/softing/Makefile | 1 + drivers/net/can/softing/softing_cs.c | 359 +++++++++++++++++++++++++++++++++++ 3 files changed, 374 insertions(+) create mode 100644 drivers/net/can/softing/softing_cs.c (limited to 'drivers') diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig index 072f337f42e3..92bd6bdde5e3 100644 --- a/drivers/net/can/softing/Kconfig +++ b/drivers/net/can/softing/Kconfig @@ -14,3 +14,17 @@ config CAN_SOFTING controls the 2 busses on the card together. As such, some actions (start/stop/busoff recovery) on 1 bus must bring down the other bus too temporarily. + +config CAN_SOFTING_CS + tristate "Softing Gmbh CAN pcmcia cards" + depends on PCMCIA + select CAN_SOFTING + ---help--- + Support for PCMCIA cards from Softing Gmbh & some cards + from Vector Gmbh. + You need firmware for these, which you can get at + http://developer.berlios.de/projects/socketcan/ + This version of the driver is written against + firmware version 4.6 (softing-fw-4.6-binaries.tar.gz) + In order to use the card as CAN device, you need the Softing generic + support too. diff --git a/drivers/net/can/softing/Makefile b/drivers/net/can/softing/Makefile index 7db04452deb6..c5e5016c742e 100644 --- a/drivers/net/can/softing/Makefile +++ b/drivers/net/can/softing/Makefile @@ -1,5 +1,6 @@ softing-y := softing_main.o softing_fw.o obj-$(CONFIG_CAN_SOFTING) += softing.o +obj-$(CONFIG_CAN_SOFTING_CS) += softing_cs.o ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG diff --git a/drivers/net/can/softing/softing_cs.c b/drivers/net/can/softing/softing_cs.c new file mode 100644 index 000000000000..300fe75dd1a7 --- /dev/null +++ b/drivers/net/can/softing/softing_cs.c @@ -0,0 +1,359 @@ +/* + * Copyright (C) 2008-2010 + * + * - Kurt Van Dijck, EIA Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License + * as published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#include +#include + +#include "softing_platform.h" + +static int softingcs_index; +static spinlock_t softingcs_index_lock; + +static int softingcs_reset(struct platform_device *pdev, int v); +static int softingcs_enable_irq(struct platform_device *pdev, int v); + +/* + * platform_data descriptions + */ +#define MHZ (1000*1000) +static const struct softing_platform_data softingcs_platform_data[] = { +{ + .name = "CANcard", + .manf = 0x0168, .prod = 0x001, + .generation = 1, + .nbus = 2, + .freq = 16 * MHZ, .max_brp = 32, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancard.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "CANcard-NEC", + .manf = 0x0168, .prod = 0x002, + .generation = 1, + .nbus = 2, + .freq = 16 * MHZ, .max_brp = 32, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancard.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "CANcard-SJA", + .manf = 0x0168, .prod = 0x004, + .generation = 1, + .nbus = 2, + .freq = 20 * MHZ, .max_brp = 32, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cansja.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "CANcard-2", + .manf = 0x0168, .prod = 0x005, + .generation = 2, + .nbus = 2, + .freq = 24 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x1000, + .boot = {0x0000, 0x000000, fw_dir "bcard2.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard2.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancrd2.bin",}, + .reset = softingcs_reset, + .enable_irq = NULL, +}, { + .name = "Vector-CANcard", + .manf = 0x0168, .prod = 0x081, + .generation = 1, + .nbus = 2, + .freq = 16 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancard.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "Vector-CANcard-SJA", + .manf = 0x0168, .prod = 0x084, + .generation = 1, + .nbus = 2, + .freq = 20 * MHZ, .max_brp = 32, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cansja.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "Vector-CANcard-2", + .manf = 0x0168, .prod = 0x085, + .generation = 2, + .nbus = 2, + .freq = 24 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x1000, + .boot = {0x0000, 0x000000, fw_dir "bcard2.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard2.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancrd2.bin",}, + .reset = softingcs_reset, + .enable_irq = NULL, +}, { + .name = "EDICcard-NEC", + .manf = 0x0168, .prod = 0x102, + .generation = 1, + .nbus = 2, + .freq = 16 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x0800, + .boot = {0x0000, 0x000000, fw_dir "bcard.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancard.bin",}, + .reset = softingcs_reset, + .enable_irq = softingcs_enable_irq, +}, { + .name = "EDICcard-2", + .manf = 0x0168, .prod = 0x105, + .generation = 2, + .nbus = 2, + .freq = 24 * MHZ, .max_brp = 64, .max_sjw = 4, + .dpram_size = 0x1000, + .boot = {0x0000, 0x000000, fw_dir "bcard2.bin",}, + .load = {0x0120, 0x00f600, fw_dir "ldcard2.bin",}, + .app = {0x0010, 0x0d0000, fw_dir "cancrd2.bin",}, + .reset = softingcs_reset, + .enable_irq = NULL, +}, { + 0, 0, +}, +}; + +MODULE_FIRMWARE(fw_dir "bcard.bin"); +MODULE_FIRMWARE(fw_dir "ldcard.bin"); +MODULE_FIRMWARE(fw_dir "cancard.bin"); +MODULE_FIRMWARE(fw_dir "cansja.bin"); + +MODULE_FIRMWARE(fw_dir "bcard2.bin"); +MODULE_FIRMWARE(fw_dir "ldcard2.bin"); +MODULE_FIRMWARE(fw_dir "cancrd2.bin"); + +static __devinit const struct softing_platform_data +*softingcs_find_platform_data(unsigned int manf, unsigned int prod) +{ + const struct softing_platform_data *lp; + + for (lp = softingcs_platform_data; lp->manf; ++lp) { + if ((lp->manf == manf) && (lp->prod == prod)) + return lp; + } + return NULL; +} + +/* + * platformdata callbacks + */ +static int softingcs_reset(struct platform_device *pdev, int v) +{ + struct pcmcia_device *pcmcia = to_pcmcia_dev(pdev->dev.parent); + + dev_dbg(&pdev->dev, "pcmcia config [2] %02x\n", v ? 0 : 0x20); + return pcmcia_write_config_byte(pcmcia, 2, v ? 0 : 0x20); +} + +static int softingcs_enable_irq(struct platform_device *pdev, int v) +{ + struct pcmcia_device *pcmcia = to_pcmcia_dev(pdev->dev.parent); + + dev_dbg(&pdev->dev, "pcmcia config [0] %02x\n", v ? 0x60 : 0); + return pcmcia_write_config_byte(pcmcia, 0, v ? 0x60 : 0); +} + +/* + * pcmcia check + */ +static __devinit int softingcs_probe_config(struct pcmcia_device *pcmcia, + void *priv_data) +{ + struct softing_platform_data *pdat = priv_data; + struct resource *pres; + int memspeed = 0; + + WARN_ON(!pdat); + pres = pcmcia->resource[PCMCIA_IOMEM_0]; + if (resource_size(pres) < 0x1000) + return -ERANGE; + + pres->flags |= WIN_MEMORY_TYPE_CM | WIN_ENABLE; + if (pdat->generation < 2) { + pres->flags |= WIN_USE_WAIT | WIN_DATA_WIDTH_8; + memspeed = 3; + } else { + pres->flags |= WIN_DATA_WIDTH_16; + } + return pcmcia_request_window(pcmcia, pres, memspeed); +} + +static __devexit void softingcs_remove(struct pcmcia_device *pcmcia) +{ + struct platform_device *pdev = pcmcia->priv; + + /* free bits */ + platform_device_unregister(pdev); + /* release pcmcia stuff */ + pcmcia_disable_device(pcmcia); +} + +/* + * platform_device wrapper + * pdev->resource has 2 entries: io & irq + */ +static void softingcs_pdev_release(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + kfree(pdev); +} + +static __devinit int softingcs_probe(struct pcmcia_device *pcmcia) +{ + int ret; + struct platform_device *pdev; + const struct softing_platform_data *pdat; + struct resource *pres; + struct dev { + struct platform_device pdev; + struct resource res[2]; + } *dev; + + /* find matching platform_data */ + pdat = softingcs_find_platform_data(pcmcia->manf_id, pcmcia->card_id); + if (!pdat) + return -ENOTTY; + + /* setup pcmcia device */ + pcmcia->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IOMEM | + CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; + ret = pcmcia_loop_config(pcmcia, softingcs_probe_config, (void *)pdat); + if (ret) + goto pcmcia_failed; + + ret = pcmcia_enable_device(pcmcia); + if (ret < 0) + goto pcmcia_failed; + + pres = pcmcia->resource[PCMCIA_IOMEM_0]; + if (!pres) { + ret = -EBADF; + goto pcmcia_bad; + } + + /* create softing platform device */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + ret = -ENOMEM; + goto mem_failed; + } + dev->pdev.resource = dev->res; + dev->pdev.num_resources = ARRAY_SIZE(dev->res); + dev->pdev.dev.release = softingcs_pdev_release; + + pdev = &dev->pdev; + pdev->dev.platform_data = (void *)pdat; + pdev->dev.parent = &pcmcia->dev; + pcmcia->priv = pdev; + + /* platform device resources */ + pdev->resource[0].flags = IORESOURCE_MEM; + pdev->resource[0].start = pres->start; + pdev->resource[0].end = pres->end; + + pdev->resource[1].flags = IORESOURCE_IRQ; + pdev->resource[1].start = pcmcia->irq; + pdev->resource[1].end = pdev->resource[1].start; + + /* platform device setup */ + spin_lock(&softingcs_index_lock); + pdev->id = softingcs_index++; + spin_unlock(&softingcs_index_lock); + pdev->name = "softing"; + dev_set_name(&pdev->dev, "softingcs.%i", pdev->id); + ret = platform_device_register(pdev); + if (ret < 0) + goto platform_failed; + + dev_info(&pcmcia->dev, "created %s\n", dev_name(&pdev->dev)); + return 0; + +platform_failed: + kfree(dev); +mem_failed: +pcmcia_bad: +pcmcia_failed: + pcmcia_disable_device(pcmcia); + pcmcia->priv = NULL; + return ret ?: -ENODEV; +} + +static /*const*/ struct pcmcia_device_id softingcs_ids[] = { + /* softing */ + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0001), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0002), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0004), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0005), + /* vector, manufacturer? */ + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0081), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0084), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0085), + /* EDIC */ + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0102), + PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0105), + PCMCIA_DEVICE_NULL, +}; + +MODULE_DEVICE_TABLE(pcmcia, softingcs_ids); + +static struct pcmcia_driver softingcs_driver = { + .owner = THIS_MODULE, + .name = "softingcs", + .id_table = softingcs_ids, + .probe = softingcs_probe, + .remove = __devexit_p(softingcs_remove), +}; + +static int __init softingcs_start(void) +{ + spin_lock_init(&softingcs_index_lock); + return pcmcia_register_driver(&softingcs_driver); +} + +static void __exit softingcs_stop(void) +{ + pcmcia_unregister_driver(&softingcs_driver); +} + +module_init(softingcs_start); +module_exit(softingcs_stop); + +MODULE_DESCRIPTION("softing CANcard driver" + ", links PCMCIA card to softing driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.1 From 41135b1ca228b6ea1a0ab9d903dd54396ebd485d Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Fri, 21 Jan 2011 09:57:28 +0100 Subject: Staging: iio: Aditional fixpoint formatted output bugfix iio: Additional fixpoint formatted output bugfixes Fix some ADC/DAC drivers' _scale interface to correct fixpoint formatted output This patch adds the fixes to ad7887_core.c and ad5446.c Signed-off-by: Roland Stigge Signed-off-by: Greg Kroah-Hartman --- drivers/staging/iio/adc/ad7887_core.c | 2 +- drivers/staging/iio/dac/ad5446.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/iio/adc/ad7887_core.c b/drivers/staging/iio/adc/ad7887_core.c index 685908995d49..5d85efab658c 100644 --- a/drivers/staging/iio/adc/ad7887_core.c +++ b/drivers/staging/iio/adc/ad7887_core.c @@ -68,7 +68,7 @@ static ssize_t ad7887_show_scale(struct device *dev, /* Corresponds to Vref / 2^(bits) */ unsigned int scale_uv = (st->int_vref_mv * 1000) >> st->chip_info->bits; - return sprintf(buf, "%d.%d\n", scale_uv / 1000, scale_uv % 1000); + return sprintf(buf, "%d.%03d\n", scale_uv / 1000, scale_uv % 1000); } static IIO_DEVICE_ATTR(in_scale, S_IRUGO, ad7887_show_scale, NULL, 0); diff --git a/drivers/staging/iio/dac/ad5446.c b/drivers/staging/iio/dac/ad5446.c index e3387cd31145..0f87ecac82fc 100644 --- a/drivers/staging/iio/dac/ad5446.c +++ b/drivers/staging/iio/dac/ad5446.c @@ -87,7 +87,7 @@ static ssize_t ad5446_show_scale(struct device *dev, /* Corresponds to Vref / 2^(bits) */ unsigned int scale_uv = (st->vref_mv * 1000) >> st->chip_info->bits; - return sprintf(buf, "%d.%d\n", scale_uv / 1000, scale_uv % 1000); + return sprintf(buf, "%d.%03d\n", scale_uv / 1000, scale_uv % 1000); } static IIO_DEVICE_ATTR(out_scale, S_IRUGO, ad5446_show_scale, NULL, 0); -- cgit v1.2.1 From d062d44a8386c82c06e483f0c0d1124ba3cab2c8 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 21 Jan 2011 13:34:15 +0100 Subject: staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel The driver assumed it would receive skb packets from MAC80211 which are not cloned. To guard this assumption an assert was placed in the transmit routine. As of kernel 2.6.37 it turns out MAC80211 does pass skb packets that are cloned. The assert is also not needed as it does not lead to a failure state in our driver when the packet is cloned. Therefore the assert can safely be removed. > commit f8a0a781488ec7288d1049e5d2022850aa98f7b6 > Author: Felix Fietkau > Date: Sat Dec 18 19:30:50 2010 +0100 > > mac80211: fix potentially redundant skb data copying > > When an skb is shared, it needs to be duplicated, along with its data > If the skb does not have enough headroom, using skb_copy might cause t > buffer to be copied twice (once by skb_copy and once by pskb_expand_he > Fix this by using skb_clone initially and letting ieee80211_skb_resize > out the rest. > > Signed-off-by: Felix Fietkau > Signed-off-by: John W. Linville > Acked-by: Brett Rudley Signed-off-by: Arend van Spriel Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/brcm80211/sys/wlc_mac80211.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/brcm80211/sys/wlc_mac80211.c b/drivers/staging/brcm80211/sys/wlc_mac80211.c index 1d5d01ac0a9b..a1303863686c 100644 --- a/drivers/staging/brcm80211/sys/wlc_mac80211.c +++ b/drivers/staging/brcm80211/sys/wlc_mac80211.c @@ -5126,7 +5126,6 @@ wlc_sendpkt_mac80211(struct wlc_info *wlc, struct sk_buff *sdu, fifo = prio2fifo[prio]; ASSERT((uint) skb_headroom(sdu) >= TXOFF); - ASSERT(!(sdu->cloned)); ASSERT(!(sdu->next)); ASSERT(!(sdu->prev)); ASSERT(fifo < NFIFO); -- cgit v1.2.1 From 4032ec639af9b735fdd903fab09de567bd73eaa0 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 21 Jan 2011 13:36:44 +0100 Subject: staging: brcm80211: fix suspend/resume issue in brcmsmac PCI PM suspend callback took down the interface and resume brought it back up. In the mac80211 context this is done in subsequent calls. Rework implementation so that suspend only stores config, and sets PCI power state. The resume return to full power state (D0), restores the config, and brings hardware back up. Full bringup is done by subsequent mac80211 calls. Reviewed-by: Brett Rudley Signed-off-by: Arend van Spriel Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/brcm80211/sys/wl_mac80211.c | 45 +++++++++++++++-------------- 1 file changed, 23 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/brcm80211/sys/wl_mac80211.c b/drivers/staging/brcm80211/sys/wl_mac80211.c index bdd629d72a75..f1235884cc5d 100644 --- a/drivers/staging/brcm80211/sys/wl_mac80211.c +++ b/drivers/staging/brcm80211/sys/wl_mac80211.c @@ -209,11 +209,8 @@ static void wl_ops_stop(struct ieee80211_hw *hw) struct wl_info *wl = hw->priv; ASSERT(wl); WL_LOCK(wl); - wl_down(wl); ieee80211_stop_queues(hw); WL_UNLOCK(wl); - - return; } static int @@ -246,7 +243,14 @@ wl_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) static void wl_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { - return; + struct wl_info *wl; + + wl = HW_TO_WL(hw); + + /* put driver in down state */ + WL_LOCK(wl); + wl_down(wl); + WL_UNLOCK(wl); } static int @@ -779,7 +783,7 @@ static struct wl_info *wl_attach(u16 vendor, u16 device, unsigned long regs, wl_found++; return wl; - fail: +fail: wl_free(wl); fail1: return NULL; @@ -1090,7 +1094,6 @@ wl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; } -#ifdef LINUXSTA_PS static int wl_suspend(struct pci_dev *pdev, pm_message_t state) { struct wl_info *wl; @@ -1105,11 +1108,12 @@ static int wl_suspend(struct pci_dev *pdev, pm_message_t state) return -ENODEV; } + /* only need to flag hw is down for proper resume */ WL_LOCK(wl); - wl_down(wl); wl->pub->hw_up = false; WL_UNLOCK(wl); - pci_save_state(pdev, wl->pci_psstate); + + pci_save_state(pdev); pci_disable_device(pdev); return pci_set_power_state(pdev, PCI_D3hot); } @@ -1133,7 +1137,7 @@ static int wl_resume(struct pci_dev *pdev) if (err) return err; - pci_restore_state(pdev, wl->pci_psstate); + pci_restore_state(pdev); err = pci_enable_device(pdev); if (err) @@ -1145,13 +1149,12 @@ static int wl_resume(struct pci_dev *pdev) if ((val & 0x0000ff00) != 0) pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); - WL_LOCK(wl); - err = wl_up(wl); - WL_UNLOCK(wl); - + /* + * done. driver will be put in up state + * in wl_ops_add_interface() call. + */ return err; } -#endif /* LINUXSTA_PS */ static void wl_remove(struct pci_dev *pdev) { @@ -1184,14 +1187,12 @@ static void wl_remove(struct pci_dev *pdev) } static struct pci_driver wl_pci_driver = { - .name = "brcm80211", - .probe = wl_pci_probe, -#ifdef LINUXSTA_PS - .suspend = wl_suspend, - .resume = wl_resume, -#endif /* LINUXSTA_PS */ - .remove = __devexit_p(wl_remove), - .id_table = wl_id_table, + .name = "brcm80211", + .probe = wl_pci_probe, + .suspend = wl_suspend, + .resume = wl_resume, + .remove = __devexit_p(wl_remove), + .id_table = wl_id_table, }; /** -- cgit v1.2.1 From cae41118f50ef0c431e13159df6d7dd8bbd54004 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20Sch=C3=BCtz?= Date: Sun, 19 Dec 2010 21:18:38 +0100 Subject: USB: usb-storage: unusual_devs update for Cypress ATACB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit New device ID added for unusual Cypress ATACB device. Signed-off-by: Richard Schütz Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_cypress.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h index c854fdebe0ae..2c8553026222 100644 --- a/drivers/usb/storage/unusual_cypress.h +++ b/drivers/usb/storage/unusual_cypress.h @@ -31,4 +31,9 @@ UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999, "Cypress ISD-300LP", USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), +UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x9999, + "Super Top", + "USB 2.0 SATA BRIDGE", + USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), + #endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */ -- cgit v1.2.1 From 7e1e7bd9dbd469267b6e6de1bf8d71a7d65ce86a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Richard=20Sch=C3=BCtz?= Date: Wed, 22 Dec 2010 14:28:56 +0100 Subject: USB: usb-storage: unusual_devs update for TrekStor DataStation maxi g.u external hard drive enclosure MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The TrekStor DataStation maxi g.u external hard drive enclosure uses a JMicron USB to SATA chip which needs the US_FL_IGNORE_RESIDUE flag to work properly. Signed-off-by: Richard Schütz Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index fcc1e32ce256..2e630e6fadad 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1872,6 +1872,15 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_READ_DISC_INFO ), +/* Patch by Richard Schütz + * This external hard drive enclosure uses a JMicron chip which + * needs the US_FL_IGNORE_RESIDUE flag to work properly. */ +UNUSUAL_DEV( 0x1e68, 0x001b, 0x0000, 0x0000, + "TrekStor GmbH & Co. KG", + "DataStation maxi g.u", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ), + UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, "ST", "2A", -- cgit v1.2.1 From a58861fbde2a350df4d27fc62fb42905669b37ce Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 31 Dec 2010 10:51:51 -0600 Subject: USB: qcaux: add Pantech UML290 device ID Another CDC-ACM + vendor specific interface layout for the QCDM port. Signed-off-by: Dan Williams Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcaux.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c index 214a3e504292..b53865b8cd9c 100644 --- a/drivers/usb/serial/qcaux.c +++ b/drivers/usb/serial/qcaux.c @@ -36,6 +36,7 @@ #define UTSTARCOM_PRODUCT_UM175_V1 0x3712 #define UTSTARCOM_PRODUCT_UM175_V2 0x3714 #define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715 +#define PANTECH_PRODUCT_UML290_VZW 0x3718 /* CMOTECH devices */ #define CMOTECH_VENDOR_ID 0x16d8 @@ -66,6 +67,7 @@ static struct usb_device_id id_table[] = { { USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, { }, }; MODULE_DEVICE_TABLE(usb, id_table); -- cgit v1.2.1 From faea63f7ccfddfb8fc19798799fcd38c58415172 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Sun, 2 Jan 2011 21:51:46 +0000 Subject: USB: CP210x Add two device IDs Device Ids added for IRZ Automation Teleport SG-10 GSM/GPRS Modem and DekTec DTA Plus VHF/UHF Booster/Attenuator. Signed-off-by: Craig Shelley Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 8d7731dbf478..f5fe0ed1a48d 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -110,7 +110,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ + { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */ { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */ + { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ -- cgit v1.2.1 From 9926c0df7b31b2128eebe92e0e2b052f380ea464 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Sun, 2 Jan 2011 21:59:08 +0000 Subject: USB: CP210x Removed incorrect device ID Device ID removed 0x10C4/0x8149 for West Mountain Radio Computerized Battery Analyzer. This device is actually based on a SiLabs C8051Fxxx, see http://www.etheus.net/SiUSBXp_Linux_Driver for further info. Signed-off-by: Craig Shelley Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index f5fe0ed1a48d..c3bea46e87fb 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -87,7 +87,6 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */ { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */ - { USB_DEVICE(0x10C4, 0x8149) }, /* West Mountain Radio Computerized Battery Analyzer */ { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */ { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */ -- cgit v1.2.1 From 12f68c480c7155a66bd2a76ab2fef28dd5f93fa2 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 3 Jan 2011 16:47:49 -0500 Subject: USB: usb-storage: unusual_devs entry for CamSport Evo This patch (as1438) adds an unusual_devs entry for the MagicPixel FW_Omega2 chip, used in the CamSport Evo camera. The firmware incorrectly reports a vendor-specific bDeviceClass. Signed-off-by: Alan Stern Reported-by: Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 2e630e6fadad..24bd5d7c3deb 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1044,6 +1044,15 @@ UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_BULK32), +/* Reported by + * The device reports a vendor-specific device class, requiring an + * explicit vendor/product match. + */ +UNUSUAL_DEV( 0x0851, 0x1542, 0x0002, 0x0002, + "MagicPixel", + "FW_Omega2", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, 0), + /* Andrew Lunn * PanDigital Digital Picture Frame. Does not like ALLOW_MEDIUM_REMOVAL * on LUN 4. -- cgit v1.2.1 From 1e4cba8bd2cddd10849e769ff502e255c27c81b4 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 20 Dec 2010 21:54:30 -0200 Subject: usb: otg: Make USB3319 ULPI ID generic On a system with a USB3317 ULPI transceiver the following message is shown on kernel boot: ULPI transceiver vendor/product ID 0x0424/0x0006 Found SMSC USB3319 ULPI transceiver. ULPI integrity check: passed. The reason is that USB3317 has the same vendor/product ID as USB3319. Make the ULPI ID generic for the USB331x transceivers. Signed-off-by: Fabio Estevam Acked-by: Igor Grinberg Signed-off-by: Greg Kroah-Hartman --- drivers/usb/otg/ulpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c index 059d9ac0ab5b..770d799d5afb 100644 --- a/drivers/usb/otg/ulpi.c +++ b/drivers/usb/otg/ulpi.c @@ -45,7 +45,7 @@ struct ulpi_info { /* ULPI hardcoded IDs, used for probing */ static struct ulpi_info ulpi_ids[] = { ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"), - ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB3319"), + ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"), }; static int ulpi_set_otg_flags(struct otg_transceiver *otg) -- cgit v1.2.1 From baab93afc2844b68d57b0dcca5e1d34c5d7cf411 Mon Sep 17 00:00:00 2001 From: Alex He Date: Tue, 21 Dec 2010 17:45:46 +0800 Subject: USB: EHCI: ASPM quirk of ISOC on AMD Hudson AMD Hudson also needs the same ASPM quirk as SB800 Signed-off-by: Alex He Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-pci.c | 33 ++++++++++++++++++++------------- 1 file changed, 20 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 76179c39c0e3..bed07d4aab06 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -44,28 +44,35 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev) return 0; } -static int ehci_quirk_amd_SB800(struct ehci_hcd *ehci) +static int ehci_quirk_amd_hudson(struct ehci_hcd *ehci) { struct pci_dev *amd_smbus_dev; u8 rev = 0; amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL); - if (!amd_smbus_dev) - return 0; - - pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); - if (rev < 0x40) { - pci_dev_put(amd_smbus_dev); - amd_smbus_dev = NULL; - return 0; + if (amd_smbus_dev) { + pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); + if (rev < 0x40) { + pci_dev_put(amd_smbus_dev); + amd_smbus_dev = NULL; + return 0; + } + } else { + amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x780b, NULL); + if (!amd_smbus_dev) + return 0; + pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); + if (rev < 0x11 || rev > 0x18) { + pci_dev_put(amd_smbus_dev); + amd_smbus_dev = NULL; + return 0; + } } if (!amd_nb_dev) amd_nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL); - if (!amd_nb_dev) - ehci_err(ehci, "QUIRK: unable to get AMD NB device\n"); - ehci_info(ehci, "QUIRK: Enable AMD SB800 L1 fix\n"); + ehci_info(ehci, "QUIRK: Enable exception for AMD Hudson ASPM\n"); pci_dev_put(amd_smbus_dev); amd_smbus_dev = NULL; @@ -131,7 +138,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) /* cache this readonly data; minimize chip reads */ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - if (ehci_quirk_amd_SB800(ehci)) + if (ehci_quirk_amd_hudson(ehci)) ehci->amd_l1_fix = 1; retval = ehci_halt(ehci); -- cgit v1.2.1 From 952eca0a95e27660f7a56a7186b9bd09d791ced4 Mon Sep 17 00:00:00 2001 From: Melchior FRANZ Date: Wed, 22 Dec 2010 13:55:24 +0100 Subject: USB: DL100B webmail notifier: initialize return value If case of an unknown usb_device_id->driver_info (which could only occur if the info got corrupted somewhere outside the usbled driver), a debug message depended on an uninitialized value. This was harmless, but ugly, and gets fixed with this patch. Signed-off-by: Melchior FRANZ Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbled.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c index 1732d9bc097e..1616ad1793a4 100644 --- a/drivers/usb/misc/usbled.c +++ b/drivers/usb/misc/usbled.c @@ -45,7 +45,7 @@ struct usb_led { static void change_color(struct usb_led *led) { - int retval; + int retval = 0; unsigned char *buffer; buffer = kmalloc(8, GFP_KERNEL); -- cgit v1.2.1 From 0cdfb819b6a97e79c7a0aa0c471cd7000367103b Mon Sep 17 00:00:00 2001 From: David Sterba Date: Mon, 27 Dec 2010 18:49:58 +0100 Subject: USB: cdc-wdm: fix misuse of logical operation in place of bitop CC: Greg Kroah-Hartman CC: Oliver Neukum CC: Marcel Holtmann Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 6ee4451bfe2d..47085e5879ab 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -342,7 +342,7 @@ static ssize_t wdm_write goto outnp; } - if (!file->f_flags && O_NONBLOCK) + if (!(file->f_flags & O_NONBLOCK)) r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE, &desc->flags)); else -- cgit v1.2.1 From 20831ad23978d0543b0b23128621b6d8ee7757f1 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 4 Jan 2011 20:21:32 +0800 Subject: usb: otg: nop: fix oops triggered by otg_register_notifier This patch adds BLOCKING_INIT_NOTIFIER_HEAD in nop_usb_xceiv_probe, so that we can avoid oops caused by uninitialized nop->otg.notifier.rwsem which will be touched in otg_register_notifier path. Reported-by: Gupta, Ajay Kumar Tested-by: Gupta, Ajay Kumar Cc: Balbi, Felipe Cc: David Brownell Signed-off-by: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/usb/otg/nop-usb-xceiv.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c index e70014ab0976..8acf165fe13b 100644 --- a/drivers/usb/otg/nop-usb-xceiv.c +++ b/drivers/usb/otg/nop-usb-xceiv.c @@ -132,6 +132,8 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev) platform_set_drvdata(pdev, nop); + BLOCKING_INIT_NOTIFIER_HEAD(&nop->otg.notifier); + return 0; exit: kfree(nop); -- cgit v1.2.1 From 956227120f2e8eed8ca459879d7eafee78591cc1 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 5 Jan 2011 14:50:54 +0800 Subject: usb: set ep_dev async suspend should be later than device_initialize The dev->power.async_suspend can only be set at the condition of dev->power.status is DPM_ON. The dev->power.status will be initialized as DPM_ON at device_initialize. Signed-off-by: Peter Chen Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/endpoint.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index 9da250563027..df502a98d0df 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -192,12 +192,12 @@ int usb_create_ep_devs(struct device *parent, ep_dev->dev.parent = parent; ep_dev->dev.release = ep_device_release; dev_set_name(&ep_dev->dev, "ep_%02x", endpoint->desc.bEndpointAddress); - device_enable_async_suspend(&ep_dev->dev); retval = device_register(&ep_dev->dev); if (retval) goto error_register; + device_enable_async_suspend(&ep_dev->dev); endpoint->ep_dev = ep_dev; return retval; -- cgit v1.2.1 From abab0c67c061612cf559ab27ce1340774d7c292d Mon Sep 17 00:00:00 2001 From: Toshiharu Okada Date: Wed, 29 Dec 2010 10:07:33 +0900 Subject: usb: pch_udc: Fixed issue which does not work with g_serial This PCH_UDC driver does not work normally when "Serial gadget" is used. The receiving data of control transmission (EP0 Control OUT Transaction) has not received correctly. This patch fixed this issue. The following was modified. - The buffer size. - The change processing of a receiving buffer (The temporary buffer and the buffer prepared by gadget). - The setup processing of a DMA descriptor. Currently the PCH_UDC driver can work normally with "Serial gadget" or "File-backed Storage Gadget". Signed-off-by: Toshiharu Okada Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/pch_udc.c | 117 +++++++++++++++++++++++++------------------ 1 file changed, 67 insertions(+), 50 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index 0c8dd81dddca..dfe927b01ffb 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -198,10 +198,10 @@ #define PCH_UDC_BRLEN 0x0F /* Burst length */ #define PCH_UDC_THLEN 0x1F /* Threshold length */ /* Value of EP Buffer Size */ -#define UDC_EP0IN_BUFF_SIZE 64 -#define UDC_EPIN_BUFF_SIZE 512 -#define UDC_EP0OUT_BUFF_SIZE 64 -#define UDC_EPOUT_BUFF_SIZE 512 +#define UDC_EP0IN_BUFF_SIZE 16 +#define UDC_EPIN_BUFF_SIZE 256 +#define UDC_EP0OUT_BUFF_SIZE 16 +#define UDC_EPOUT_BUFF_SIZE 256 /* Value of EP maximum packet size */ #define UDC_EP0IN_MAX_PKT_SIZE 64 #define UDC_EP0OUT_MAX_PKT_SIZE 64 @@ -351,7 +351,7 @@ struct pch_udc_dev { struct pci_pool *data_requests; struct pci_pool *stp_requests; dma_addr_t dma_addr; - unsigned long ep0out_buf[64]; + void *ep0out_buf; struct usb_ctrlrequest setup_data; unsigned long phys_addr; void __iomem *base_addr; @@ -1219,11 +1219,11 @@ static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req, dev = ep->dev; if (req->dma_mapped) { if (ep->in) - pci_unmap_single(dev->pdev, req->req.dma, - req->req.length, PCI_DMA_TODEVICE); + dma_unmap_single(&dev->pdev->dev, req->req.dma, + req->req.length, DMA_TO_DEVICE); else - pci_unmap_single(dev->pdev, req->req.dma, - req->req.length, PCI_DMA_FROMDEVICE); + dma_unmap_single(&dev->pdev->dev, req->req.dma, + req->req.length, DMA_FROM_DEVICE); req->dma_mapped = 0; req->req.dma = DMA_ADDR_INVALID; } @@ -1414,7 +1414,6 @@ static void pch_udc_start_rxrequest(struct pch_udc_ep *ep, pch_udc_clear_dma(ep->dev, DMA_DIR_RX); td_data = req->td_data; - ep->td_data = req->td_data; /* Set the status bits for all descriptors */ while (1) { td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) | @@ -1613,15 +1612,19 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq, if (usbreq->length && ((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) { if (ep->in) - usbreq->dma = pci_map_single(dev->pdev, usbreq->buf, - usbreq->length, PCI_DMA_TODEVICE); + usbreq->dma = dma_map_single(&dev->pdev->dev, + usbreq->buf, + usbreq->length, + DMA_TO_DEVICE); else - usbreq->dma = pci_map_single(dev->pdev, usbreq->buf, - usbreq->length, PCI_DMA_FROMDEVICE); + usbreq->dma = dma_map_single(&dev->pdev->dev, + usbreq->buf, + usbreq->length, + DMA_FROM_DEVICE); req->dma_mapped = 1; } if (usbreq->length > 0) { - retval = prepare_dma(ep, req, gfp); + retval = prepare_dma(ep, req, GFP_ATOMIC); if (retval) goto probe_end; } @@ -1646,7 +1649,6 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq, pch_udc_wait_ep_stall(ep); pch_udc_ep_clear_nak(ep); pch_udc_enable_ep_interrupts(ep->dev, (1 << ep->num)); - pch_udc_set_dma(dev, DMA_DIR_TX); } } /* Now add this request to the ep's pending requests */ @@ -1926,6 +1928,7 @@ static void pch_udc_complete_receiver(struct pch_udc_ep *ep) PCH_UDC_BS_DMA_DONE) return; pch_udc_clear_dma(ep->dev, DMA_DIR_RX); + pch_udc_ep_set_ddptr(ep, 0); if ((req->td_data_last->status & PCH_UDC_RXTX_STS) != PCH_UDC_RTS_SUCC) { dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) " @@ -1963,7 +1966,7 @@ static void pch_udc_svc_data_in(struct pch_udc_dev *dev, int ep_num) u32 epsts; struct pch_udc_ep *ep; - ep = &dev->ep[2*ep_num]; + ep = &dev->ep[UDC_EPIN_IDX(ep_num)]; epsts = ep->epsts; ep->epsts = 0; @@ -2008,7 +2011,7 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num) struct pch_udc_ep *ep; struct pch_udc_request *req = NULL; - ep = &dev->ep[2*ep_num + 1]; + ep = &dev->ep[UDC_EPOUT_IDX(ep_num)]; epsts = ep->epsts; ep->epsts = 0; @@ -2025,10 +2028,11 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num) } if (epsts & UDC_EPSTS_HE) return; - if (epsts & UDC_EPSTS_RSS) + if (epsts & UDC_EPSTS_RSS) { pch_udc_ep_set_stall(ep); pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num)); + } if (epsts & UDC_EPSTS_RCS) { if (!dev->prot_stall) { pch_udc_ep_clear_stall(ep); @@ -2060,8 +2064,10 @@ static void pch_udc_svc_control_in(struct pch_udc_dev *dev) { u32 epsts; struct pch_udc_ep *ep; + struct pch_udc_ep *ep_out; ep = &dev->ep[UDC_EP0IN_IDX]; + ep_out = &dev->ep[UDC_EP0OUT_IDX]; epsts = ep->epsts; ep->epsts = 0; @@ -2073,8 +2079,16 @@ static void pch_udc_svc_control_in(struct pch_udc_dev *dev) return; if (epsts & UDC_EPSTS_HE) return; - if ((epsts & UDC_EPSTS_TDC) && (!dev->stall)) + if ((epsts & UDC_EPSTS_TDC) && (!dev->stall)) { pch_udc_complete_transfer(ep); + pch_udc_clear_dma(dev, DMA_DIR_RX); + ep_out->td_data->status = (ep_out->td_data->status & + ~PCH_UDC_BUFF_STS) | + PCH_UDC_BS_HST_RDY; + pch_udc_ep_clear_nak(ep_out); + pch_udc_set_dma(dev, DMA_DIR_RX); + pch_udc_ep_set_rrdy(ep_out); + } /* On IN interrupt, provide data if we have any */ if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_TDC) && !(epsts & UDC_EPSTS_TXEMPTY)) @@ -2102,11 +2116,9 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev) dev->stall = 0; dev->ep[UDC_EP0IN_IDX].halted = 0; dev->ep[UDC_EP0OUT_IDX].halted = 0; - /* In data not ready */ - pch_udc_ep_set_nak(&(dev->ep[UDC_EP0IN_IDX])); dev->setup_data = ep->td_stp->request; pch_udc_init_setup_buff(ep->td_stp); - pch_udc_clear_dma(dev, DMA_DIR_TX); + pch_udc_clear_dma(dev, DMA_DIR_RX); pch_udc_ep_fifo_flush(&(dev->ep[UDC_EP0IN_IDX]), dev->ep[UDC_EP0IN_IDX].in); if ((dev->setup_data.bRequestType & USB_DIR_IN)) @@ -2122,14 +2134,23 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev) setup_supported = dev->driver->setup(&dev->gadget, &dev->setup_data); spin_lock(&dev->lock); + + if (dev->setup_data.bRequestType & USB_DIR_IN) { + ep->td_data->status = (ep->td_data->status & + ~PCH_UDC_BUFF_STS) | + PCH_UDC_BS_HST_RDY; + pch_udc_ep_set_ddptr(ep, ep->td_data_phys); + } /* ep0 in returns data on IN phase */ if (setup_supported >= 0 && setup_supported < UDC_EP0IN_MAX_PKT_SIZE) { pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX])); /* Gadget would have queued a request when * we called the setup */ - pch_udc_set_dma(dev, DMA_DIR_RX); - pch_udc_ep_clear_nak(ep); + if (!(dev->setup_data.bRequestType & USB_DIR_IN)) { + pch_udc_set_dma(dev, DMA_DIR_RX); + pch_udc_ep_clear_nak(ep); + } } else if (setup_supported < 0) { /* if unsupported request, then stall */ pch_udc_ep_set_stall(&(dev->ep[UDC_EP0IN_IDX])); @@ -2142,22 +2163,13 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev) } } else if ((((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) == UDC_EPSTS_OUT_DATA) && !dev->stall) { - if (list_empty(&ep->queue)) { - dev_err(&dev->pdev->dev, "%s: No request\n", __func__); - ep->td_data->status = (ep->td_data->status & - ~PCH_UDC_BUFF_STS) | - PCH_UDC_BS_HST_RDY; - pch_udc_set_dma(dev, DMA_DIR_RX); - } else { - /* control write */ - /* next function will pickuo an clear the status */ + pch_udc_clear_dma(dev, DMA_DIR_RX); + pch_udc_ep_set_ddptr(ep, 0); + if (!list_empty(&ep->queue)) { ep->epsts = stat; - - pch_udc_svc_data_out(dev, 0); - /* re-program desc. pointer for possible ZLPs */ - pch_udc_ep_set_ddptr(ep, ep->td_data_phys); - pch_udc_set_dma(dev, DMA_DIR_RX); + pch_udc_svc_data_out(dev, PCH_UDC_EP0); } + pch_udc_set_dma(dev, DMA_DIR_RX); } pch_udc_ep_set_rrdy(ep); } @@ -2174,7 +2186,7 @@ static void pch_udc_postsvc_epinters(struct pch_udc_dev *dev, int ep_num) struct pch_udc_ep *ep; struct pch_udc_request *req; - ep = &dev->ep[2*ep_num]; + ep = &dev->ep[UDC_EPIN_IDX(ep_num)]; if (!list_empty(&ep->queue)) { req = list_entry(ep->queue.next, struct pch_udc_request, queue); pch_udc_enable_ep_interrupts(ep->dev, @@ -2196,13 +2208,13 @@ static void pch_udc_read_all_epstatus(struct pch_udc_dev *dev, u32 ep_intr) for (i = 0; i < PCH_UDC_USED_EP_NUM; i++) { /* IN */ if (ep_intr & (0x1 << i)) { - ep = &dev->ep[2*i]; + ep = &dev->ep[UDC_EPIN_IDX(i)]; ep->epsts = pch_udc_read_ep_status(ep); pch_udc_clear_ep_status(ep, ep->epsts); } /* OUT */ if (ep_intr & (0x10000 << i)) { - ep = &dev->ep[2*i+1]; + ep = &dev->ep[UDC_EPOUT_IDX(i)]; ep->epsts = pch_udc_read_ep_status(ep); pch_udc_clear_ep_status(ep, ep->epsts); } @@ -2563,9 +2575,6 @@ static void pch_udc_pcd_reinit(struct pch_udc_dev *dev) dev->ep[UDC_EP0IN_IDX].ep.maxpacket = UDC_EP0IN_MAX_PKT_SIZE; dev->ep[UDC_EP0OUT_IDX].ep.maxpacket = UDC_EP0OUT_MAX_PKT_SIZE; - dev->dma_addr = pci_map_single(dev->pdev, dev->ep0out_buf, 256, - PCI_DMA_FROMDEVICE); - /* remove ep0 in and out from the list. They have own pointer */ list_del_init(&dev->ep[UDC_EP0IN_IDX].ep.ep_list); list_del_init(&dev->ep[UDC_EP0OUT_IDX].ep.ep_list); @@ -2637,6 +2646,13 @@ static int init_dma_pools(struct pch_udc_dev *dev) dev->ep[UDC_EP0IN_IDX].td_stp_phys = 0; dev->ep[UDC_EP0IN_IDX].td_data = NULL; dev->ep[UDC_EP0IN_IDX].td_data_phys = 0; + + dev->ep0out_buf = kzalloc(UDC_EP0OUT_BUFF_SIZE * 4, GFP_KERNEL); + if (!dev->ep0out_buf) + return -ENOMEM; + dev->dma_addr = dma_map_single(&dev->pdev->dev, dev->ep0out_buf, + UDC_EP0OUT_BUFF_SIZE * 4, + DMA_FROM_DEVICE); return 0; } @@ -2750,6 +2766,11 @@ static void pch_udc_remove(struct pci_dev *pdev) pci_pool_destroy(dev->stp_requests); } + if (dev->dma_addr) + dma_unmap_single(&dev->pdev->dev, dev->dma_addr, + UDC_EP0OUT_BUFF_SIZE * 4, DMA_FROM_DEVICE); + kfree(dev->ep0out_buf); + pch_udc_exit(dev); if (dev->irq_registered) @@ -2792,11 +2813,7 @@ static int pch_udc_resume(struct pci_dev *pdev) int ret; pci_set_power_state(pdev, PCI_D0); - ret = pci_restore_state(pdev); - if (ret) { - dev_err(&pdev->dev, "%s: pci_restore_state failed\n", __func__); - return ret; - } + pci_restore_state(pdev); ret = pci_enable_device(pdev); if (ret) { dev_err(&pdev->dev, "%s: pci_enable_device failed\n", __func__); -- cgit v1.2.1 From 06f1b9715c324589b42be69ad33422b83bd42f02 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Thu, 6 Jan 2011 09:16:31 +0900 Subject: USB: pch_udc: support new device ML7213 IOH Support new device OKI SEMICONDUCTOR's ML7213 IOH(Input/Output Hub) which is for IVI(In-Vehicle Infotainment) use. The ML7213 is companion chip for Intel Atom E6xx series. The ML7213 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/Kconfig | 7 ++++++- drivers/usb/gadget/pch_udc.c | 7 +++++++ 2 files changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 1dc9739277b4..06bb9d4587e9 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -509,7 +509,7 @@ config USB_LANGWELL select USB_GADGET_SELECTED config USB_GADGET_EG20T - boolean "Intel EG20T(Topcliff) USB Device controller" + boolean "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH UDC" depends on PCI select USB_GADGET_DUALSPEED help @@ -525,6 +525,11 @@ config USB_GADGET_EG20T This driver dose not support interrupt transfer or isochronous transfer modes. + This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is + for IVI(In-Vehicle Infotainment) use. + ML7213 is companion chip for Intel Atom E6xx series. + ML7213 is completely compatible for Intel EG20T PCH. + config USB_EG20T tristate depends on USB_GADGET_EG20T diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index dfe927b01ffb..cf0e6da724a9 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -361,6 +361,8 @@ struct pch_udc_dev { #define PCH_UDC_PCI_BAR 1 #define PCI_DEVICE_ID_INTEL_EG20T_UDC 0x8808 +#define PCI_VENDOR_ID_ROHM 0x10DB +#define PCI_DEVICE_ID_ML7213_IOH_UDC 0x801D static const char ep0_string[] = "ep0in"; static DEFINE_SPINLOCK(udc_stall_spinlock); /* stall spin lock */ @@ -2931,6 +2933,11 @@ static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = { .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe, .class_mask = 0xffffffff, }, + { + PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7213_IOH_UDC), + .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe, + .class_mask = 0xffffffff, + }, { 0 }, }; -- cgit v1.2.1 From f75593ceaa08e6d27aec1a5de31cded19e850dd1 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 6 Jan 2011 10:17:09 -0500 Subject: USB: EHCI: fix DMA deallocation bug This patch (as1440) fixes a bug in ehci-hcd. ehci->periodic_size is used to compute the size in a dma_alloc_coherent() call, but then it gets changed later on. As a result, the corresponding call to dma_free_coherent() passes a different size from the original allocation. Fix the problem by adjusting ehci->periodic_size before carrying out any of the memory allocations. Signed-off-by: Alan Stern Tested-by: Larry Finger CC: David Brownell CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 6fee3cd58efe..74dcf49bd015 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -572,6 +572,8 @@ static int ehci_init(struct usb_hcd *hcd) ehci->iaa_watchdog.function = ehci_iaa_watchdog; ehci->iaa_watchdog.data = (unsigned long) ehci; + hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params); + /* * hw default: 1K periodic list heads, one per frame. * periodic_size can shrink by USBCMD update if hcc_params allows. @@ -579,11 +581,20 @@ static int ehci_init(struct usb_hcd *hcd) ehci->periodic_size = DEFAULT_I_TDPS; INIT_LIST_HEAD(&ehci->cached_itd_list); INIT_LIST_HEAD(&ehci->cached_sitd_list); + + if (HCC_PGM_FRAMELISTLEN(hcc_params)) { + /* periodic schedule size can be smaller than default */ + switch (EHCI_TUNE_FLS) { + case 0: ehci->periodic_size = 1024; break; + case 1: ehci->periodic_size = 512; break; + case 2: ehci->periodic_size = 256; break; + default: BUG(); + } + } if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0) return retval; /* controllers may cache some of the periodic schedule ... */ - hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params); if (HCC_ISOC_CACHE(hcc_params)) // full frame cache ehci->i_thresh = 2 + 8; else // N microframes cached @@ -637,12 +648,6 @@ static int ehci_init(struct usb_hcd *hcd) /* periodic schedule size can be smaller than default */ temp &= ~(3 << 2); temp |= (EHCI_TUNE_FLS << 2); - switch (EHCI_TUNE_FLS) { - case 0: ehci->periodic_size = 1024; break; - case 1: ehci->periodic_size = 512; break; - case 2: ehci->periodic_size = 256; break; - default: BUG(); - } } if (HCC_LPM(hcc_params)) { /* support link power management EHCI 1.1 addendum */ -- cgit v1.2.1 From bbfba05283ba482ab7c119150fd3c5611939f9fd Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 8 Jan 2011 18:30:30 +0300 Subject: USB: uss720: remove duplicate USB device Commit ecc1624a2fff45780959efbcb73ace18fdb3c58d (USB: misc: uss720.c: add another vendor/product ID) duplicated entry in the driver's USB device ID table. Remove the duplicate. Signed-off-by: Sergei Shtylyov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/uss720.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 4ff21587ab03..f7a205738032 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -776,7 +776,6 @@ static const struct usb_device_id uss720_table[] = { { USB_DEVICE(0x0557, 0x2001) }, { USB_DEVICE(0x0729, 0x1284) }, { USB_DEVICE(0x1293, 0x0002) }, - { USB_DEVICE(0x1293, 0x0002) }, { USB_DEVICE(0x050d, 0x0002) }, { } /* Terminating entry */ }; -- cgit v1.2.1 From d5aa475180d03d45c5dc6134aa833f1b3e89c45e Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 10 Jan 2011 11:23:05 -0500 Subject: USB: g_printer: fix bug in unregistration This patch (as1441) fixes a bug in g_printer. The gadget driver, char device number, and class device should be unregistered in reverse order of registration. As it is now, when the module is unloaded the class device gets unregistered first, causing a crash when the unbind method tries to access it. This fixes Bugzilla #25882. Signed-off-by: Alan Stern CC: Roland Kletzing CC: Craig W. Nadler CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/printer.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 2fc8636316c5..dacc67724fe1 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -1596,13 +1596,12 @@ cleanup(void) int status; mutex_lock(&usb_printer_gadget.lock_printer_io); - class_destroy(usb_gadget_class); - unregister_chrdev_region(g_printer_devno, 2); - status = usb_gadget_unregister_driver(&printer_driver); if (status) ERROR(dev, "usb_gadget_unregister_driver %x\n", status); + unregister_chrdev_region(g_printer_devno, 2); + class_destroy(usb_gadget_class); mutex_unlock(&usb_printer_gadget.lock_printer_io); } module_exit(cleanup); -- cgit v1.2.1 From ad84e4a9efb7c8ed322bafb6ebdb9c3a49a3d3a8 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 10 Jan 2011 11:24:14 -0500 Subject: USB: g_printer: fix bug in module parameter definitions This patch (as1442) fixes a bug in g_printer: Module parameters should not be marked "__initdata" if they are accessible in sysfs (i.e., if the mode value in the module_param() macro is nonzero). Otherwise attempts to access the parameters will cause addressing violations. Character-string module parameters must not be marked "__initdata" if the module can be unloaded, because the kernel needs to access the parameter variable at unload time in order to free the dynamically-allocated string. Signed-off-by: Alan Stern CC: Roland Kletzing CC: Craig W. Nadler CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/printer.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index dacc67724fe1..12ff6cffedc9 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -131,31 +131,31 @@ static struct printer_dev usb_printer_gadget; * parameters are in UTF-8 (superset of ASCII's 7 bit characters). */ -static ushort __initdata idVendor; +static ushort idVendor; module_param(idVendor, ushort, S_IRUGO); MODULE_PARM_DESC(idVendor, "USB Vendor ID"); -static ushort __initdata idProduct; +static ushort idProduct; module_param(idProduct, ushort, S_IRUGO); MODULE_PARM_DESC(idProduct, "USB Product ID"); -static ushort __initdata bcdDevice; +static ushort bcdDevice; module_param(bcdDevice, ushort, S_IRUGO); MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); -static char *__initdata iManufacturer; +static char *iManufacturer; module_param(iManufacturer, charp, S_IRUGO); MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); -static char *__initdata iProduct; +static char *iProduct; module_param(iProduct, charp, S_IRUGO); MODULE_PARM_DESC(iProduct, "USB Product string"); -static char *__initdata iSerialNum; +static char *iSerialNum; module_param(iSerialNum, charp, S_IRUGO); MODULE_PARM_DESC(iSerialNum, "1"); -static char *__initdata iPNPstring; +static char *iPNPstring; module_param(iPNPstring, charp, S_IRUGO); MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;"); -- cgit v1.2.1 From cc604ddd118cf4a699c12bc41a5fa2d2f225f702 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Mon, 10 Jan 2011 17:34:14 -0600 Subject: USB: ehci-fsl: Fix 'have_sysif_regs' detection Previously a check was done on an ID register at the base of a CPU's internal USB registers to determine if system interface regsiters were present. The check looked for an ID register that had the format ID[0:5] == ~ID[8:13] as described in the MPC5121 User's Manual to determine if a MPC5121 or MPC83xx/85xx was being used. There are two issues with this method: - The ID register is not defined on the MPC83xx/85xx CPUs, so its unclear what is being checked on them. - Newer CPUs such as the P4080 also don't document the ID register, but do share the same format as the MPC5121. Thus the previous code did not set 'have_sysif_regs' properly which results in the P4080 not properly initializing its USB ports. Using the device tree 'compatible' node is a cleaner way to determine if 'have_sysif_regs' should be set and resolves the USB initialization issue seen on the P4080. Tested on a P4080-based system and compile tested on mpc512x_defconfig with Freescale EHCI driver enabled. Cc: Anatolij Gustschin Cc: David Brownell Cc: Kumar Gala Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Peter Tyser Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-fsl.c | 13 ------------- drivers/usb/host/ehci-fsl.h | 3 --- drivers/usb/host/fsl-mph-dr-of.c | 11 ++++++++--- 3 files changed, 8 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 86e42892016d..5c761df7fa83 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -52,7 +52,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, struct resource *res; int irq; int retval; - unsigned int temp; pr_debug("initializing FSL-SOC USB Controller\n"); @@ -126,18 +125,6 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, goto err3; } - /* - * Check if it is MPC5121 SoC, otherwise set pdata->have_sysif_regs - * flag for 83xx or 8536 system interface registers. - */ - if (pdata->big_endian_mmio) - temp = in_be32(hcd->regs + FSL_SOC_USB_ID); - else - temp = in_le32(hcd->regs + FSL_SOC_USB_ID); - - if ((temp & ID_MSK) != (~((temp & NID_MSK) >> 8) & ID_MSK)) - pdata->have_sysif_regs = 1; - /* Enable USB controller, 83xx or 8536 */ if (pdata->have_sysif_regs) setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4); diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index 2c8353795226..3fabed33d940 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -19,9 +19,6 @@ #define _EHCI_FSL_H /* offsets for the non-ehci registers in the FSL SOC USB controller */ -#define FSL_SOC_USB_ID 0x0 -#define ID_MSK 0x3f -#define NID_MSK 0x3f00 #define FSL_SOC_USB_ULPIVP 0x170 #define FSL_SOC_USB_PORTSC1 0x184 #define PORT_PTS_MSK (3<<30) diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index 574b99ea0700..79a66d622f9c 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -262,19 +262,24 @@ static void fsl_usb2_mpc5121_exit(struct platform_device *pdev) } } -struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = { +static struct fsl_usb2_platform_data fsl_usb2_mpc5121_pd = { .big_endian_desc = 1, .big_endian_mmio = 1, .es = 1, + .have_sysif_regs = 0, .le_setup_buf = 1, .init = fsl_usb2_mpc5121_init, .exit = fsl_usb2_mpc5121_exit, }; #endif /* CONFIG_PPC_MPC512x */ +static struct fsl_usb2_platform_data fsl_usb2_mpc8xxx_pd = { + .have_sysif_regs = 1, +}; + static const struct of_device_id fsl_usb2_mph_dr_of_match[] = { - { .compatible = "fsl-usb2-mph", }, - { .compatible = "fsl-usb2-dr", }, + { .compatible = "fsl-usb2-mph", .data = &fsl_usb2_mpc8xxx_pd, }, + { .compatible = "fsl-usb2-dr", .data = &fsl_usb2_mpc8xxx_pd, }, #ifdef CONFIG_PPC_MPC512x { .compatible = "fsl,mpc5121-usb2-dr", .data = &fsl_usb2_mpc5121_pd, }, #endif -- cgit v1.2.1 From 5620b5f7f19e9ee3fcf6ecf493fed7821b7b495b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 11 Jan 2011 14:16:50 -0500 Subject: USB serial: add missing .usb_driver field in serial drivers This patch (as1443) fixes a bug found in many of the USB serial drivers: They don't set the .usb_driver field in their usb_serial_driver structure. This field is needed for assigning dynamic IDs for device matching. In addition, starting with the 2.6.37 kernel, the .usb_driver field is needed for proper autosuspend operation. Without it, attempts to open the device file will fail. Signed-off-by: Alan Stern Reported-by: Dan Williams CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_tables.h | 1 + drivers/usb/serial/iuu_phoenix.c | 1 + drivers/usb/serial/keyspan.h | 4 ++++ drivers/usb/serial/moto_modem.c | 1 + drivers/usb/serial/oti6858.c | 1 + drivers/usb/serial/qcaux.c | 1 + drivers/usb/serial/siemens_mpi.c | 1 + drivers/usb/serial/spcp8x5.c | 1 + drivers/usb/serial/usb-serial.c | 8 ++++++-- drivers/usb/serial/usb_debug.c | 1 + 10 files changed, 18 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 6ab2a3f97fe8..178b22eb32b1 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -199,6 +199,7 @@ static struct usb_serial_driver epic_device = { .name = "epic", }, .description = "EPiC device", + .usb_driver = &io_driver, .id_table = Epic_port_id_table, .num_ports = 1, .open = edge_open, diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 12ed594f5f80..99b97c04896f 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -1275,6 +1275,7 @@ static struct usb_serial_driver iuu_device = { .name = "iuu_phoenix", }, .id_table = id_table, + .usb_driver = &iuu_driver, .num_ports = 1, .bulk_in_size = 512, .bulk_out_size = 512, diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index 2d8baf6ac472..ce134dc28ddf 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -546,6 +546,7 @@ static struct usb_serial_driver keyspan_pre_device = { .name = "keyspan_no_firm", }, .description = "Keyspan - (without firmware)", + .usb_driver = &keyspan_driver, .id_table = keyspan_pre_ids, .num_ports = 1, .attach = keyspan_fake_startup, @@ -557,6 +558,7 @@ static struct usb_serial_driver keyspan_1port_device = { .name = "keyspan_1", }, .description = "Keyspan 1 port adapter", + .usb_driver = &keyspan_driver, .id_table = keyspan_1port_ids, .num_ports = 1, .open = keyspan_open, @@ -579,6 +581,7 @@ static struct usb_serial_driver keyspan_2port_device = { .name = "keyspan_2", }, .description = "Keyspan 2 port adapter", + .usb_driver = &keyspan_driver, .id_table = keyspan_2port_ids, .num_ports = 2, .open = keyspan_open, @@ -601,6 +604,7 @@ static struct usb_serial_driver keyspan_4port_device = { .name = "keyspan_4", }, .description = "Keyspan 4 port adapter", + .usb_driver = &keyspan_driver, .id_table = keyspan_4port_ids, .num_ports = 4, .open = keyspan_open, diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c index cf1718394e18..653465f61d4a 100644 --- a/drivers/usb/serial/moto_modem.c +++ b/drivers/usb/serial/moto_modem.c @@ -44,6 +44,7 @@ static struct usb_serial_driver moto_device = { .name = "moto-modem", }, .id_table = id_table, + .usb_driver = &moto_driver, .num_ports = 1, }; diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 5be866bb7a41..73613205be7a 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -157,6 +157,7 @@ static struct usb_serial_driver oti6858_device = { .name = "oti6858", }, .id_table = id_table, + .usb_driver = &oti6858_driver, .num_ports = 1, .open = oti6858_open, .close = oti6858_close, diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c index b53865b8cd9c..30b73e68a904 100644 --- a/drivers/usb/serial/qcaux.c +++ b/drivers/usb/serial/qcaux.c @@ -86,6 +86,7 @@ static struct usb_serial_driver qcaux_device = { .name = "qcaux", }, .id_table = id_table, + .usb_driver = &qcaux_driver, .num_ports = 1, }; diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c index cb8195cabfde..74cd4ccdb3fc 100644 --- a/drivers/usb/serial/siemens_mpi.c +++ b/drivers/usb/serial/siemens_mpi.c @@ -42,6 +42,7 @@ static struct usb_serial_driver siemens_usb_mpi_device = { .name = "siemens_mpi", }, .id_table = id_table, + .usb_driver = &siemens_usb_mpi_driver, .num_ports = 1, }; diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 765aa983bf58..c7665d39d192 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -645,6 +645,7 @@ static struct usb_serial_driver spcp8x5_device = { .name = "SPCP8x5", }, .id_table = id_table, + .usb_driver = &spcp8x5_driver, .num_ports = 1, .open = spcp8x5_open, .dtr_rts = spcp8x5_dtr_rts, diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 6954de50c0ff..546a52179bec 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1344,11 +1344,15 @@ int usb_serial_register(struct usb_serial_driver *driver) return -ENODEV; fixup_generic(driver); - if (driver->usb_driver) - driver->usb_driver->supports_autosuspend = 1; if (!driver->description) driver->description = driver->driver.name; + if (!driver->usb_driver) { + WARN(1, "Serial driver %s has no usb_driver\n", + driver->description); + return -EINVAL; + } + driver->usb_driver->supports_autosuspend = 1; /* Add this device to our list of devices */ mutex_lock(&table_lock); diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c index f2ed6a31be77..95a82148ee81 100644 --- a/drivers/usb/serial/usb_debug.c +++ b/drivers/usb/serial/usb_debug.c @@ -75,6 +75,7 @@ static struct usb_serial_driver debug_device = { .name = "debug", }, .id_table = id_table, + .usb_driver = &debug_driver, .num_ports = 1, .bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE, .break_ctl = usb_debug_break_ctl, -- cgit v1.2.1 From aa52b3a92918039b273fc9d1994bd34227c40269 Mon Sep 17 00:00:00 2001 From: Nicolaus Colberg Date: Wed, 12 Jan 2011 16:30:03 +0100 Subject: USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products /drivers/usb/serial/option.c: Adding support for Cinterion's HC25, HC28, HC28J, EU3-E, EU3-P and PH8 by correcting/adding Cinterion's and Siemens' Vendor IDs as well as Product IDs and USB_DEVICE tuples Signed-off-by: Nicolaus Colberg Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 748778288d94..5f46838dfee5 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -382,7 +382,16 @@ static void option_instat_callback(struct urb *urb); #define HAIER_VENDOR_ID 0x201e #define HAIER_PRODUCT_CE100 0x2009 -#define CINTERION_VENDOR_ID 0x0681 +/* Cinterion (formerly Siemens) products */ +#define SIEMENS_VENDOR_ID 0x0681 +#define CINTERION_VENDOR_ID 0x1e2d +#define CINTERION_PRODUCT_HC25_MDM 0x0047 +#define CINTERION_PRODUCT_HC25_MDMNET 0x0040 +#define CINTERION_PRODUCT_HC28_MDM 0x004C +#define CINTERION_PRODUCT_HC28_MDMNET 0x004A /* same for HC28J */ +#define CINTERION_PRODUCT_EU3_E 0x0051 +#define CINTERION_PRODUCT_EU3_P 0x0052 +#define CINTERION_PRODUCT_PH8 0x0053 /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c @@ -944,7 +953,17 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F) }, { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011)}, { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)}, - { USB_DEVICE(CINTERION_VENDOR_ID, 0x0047) }, + /* Cinterion */ + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */ + { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) }, { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */ -- cgit v1.2.1 From 96a3e79edff6f41b0f115a82f1a39d66218077a7 Mon Sep 17 00:00:00 2001 From: Dario Lombardo Date: Fri, 21 Jan 2011 15:35:19 +0100 Subject: drivers: update to pl2303 usb-serial to support Motorola cables Added 0x0307 device id to support Motorola cables to the pl2303 usb serial driver. This cable has a modified chip that is a pl2303, but declares itself as 0307. Fixed by adding the right device id to the supported devices list, assigning it the code labeled PL2303_PRODUCT_ID_MOTOROLA. Signed-off-by: Dario Lombardo Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/pl2303.h | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 8ae4c6cbc38a..45c40e6e9737 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -50,6 +50,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 43eb9bdad422..1b025f75dafd 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -21,6 +21,7 @@ #define PL2303_PRODUCT_ID_MMX 0x0612 #define PL2303_PRODUCT_ID_GPRS 0x0609 #define PL2303_PRODUCT_ID_HCR331 0x331a +#define PL2303_PRODUCT_ID_MOTOROLA 0x0307 #define ATEN_VENDOR_ID 0x0557 #define ATEN_VENDOR_ID2 0x0547 -- cgit v1.2.1 From 3bb8029a2445e289efade6133b01545143336f70 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Eric=20B=C3=A9nard?= Date: Thu, 13 Jan 2011 14:53:17 +0100 Subject: USB: unbreak ehci-mxc on otg port of i.MX27 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 711669e5b80b6f2d88f61ed8a9681f83d8cbd201 fixed port 0 support for i.MX51 but broke it for (at least) i.MX27 which doesn't have a usb_phy1 clock but has a pdev->id 0. Signed-off-by: Eric Bénard Cc: Arnaud Patard Cc: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-mxc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index fa59b26fc5bc..d443fbd8535b 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -177,8 +177,8 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) clk_enable(priv->ahbclk); } - /* "dr" device has its own clock */ - if (pdev->id == 0) { + /* "dr" device has its own clock on i.MX51 */ + if (cpu_is_mx51() && (pdev->id == 0)) { priv->phy1clk = clk_get(dev, "usb_phy1"); if (IS_ERR(priv->phy1clk)) { ret = PTR_ERR(priv->phy1clk); -- cgit v1.2.1 From a464dc4d4044c936d4558725fa2229fb4a1aa932 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Tue, 18 Jan 2011 00:04:12 +0100 Subject: USB: ehci-mxc: add work-around for efika mx/sb bug Add support for setting CHRGVBUS to workaround a hardware bug on efika mx/sb boards. See http://lists.infradead.org/pipermail/linux-arm-kernel/2011-January/037341.html Signed-off-by: Arnaud Patard Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-mxc.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index d443fbd8535b..c8e360d7d975 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -21,10 +21,13 @@ #include #include #include +#include #include #include +#include + #define ULPI_VIEWPORT_OFFSET 0x170 struct ehci_mxc_priv { @@ -114,6 +117,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) struct usb_hcd *hcd; struct resource *res; int irq, ret; + unsigned int flags; struct ehci_mxc_priv *priv; struct device *dev = &pdev->dev; struct ehci_hcd *ehci; @@ -240,6 +244,23 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) if (ret) goto err_add; + if (pdata->otg) { + /* + * efikamx and efikasb have some hardware bug which is + * preventing usb to work unless CHRGVBUS is set. + * It's in violation of USB specs + */ + if (machine_is_mx51_efikamx() || machine_is_mx51_efikasb()) { + flags = otg_io_read(pdata->otg, ULPI_OTG_CTRL); + flags |= ULPI_OTG_CTRL_CHRGVBUS; + ret = otg_io_write(pdata->otg, flags, ULPI_OTG_CTRL); + if (ret) { + dev_err(dev, "unable to set CHRVBUS\n"); + goto err_add; + } + } + } + return 0; err_add: -- cgit v1.2.1 From a9d61bc49188e32d2ae9cf0f683cde3e1744feef Mon Sep 17 00:00:00 2001 From: Pieter Maes Date: Tue, 18 Jan 2011 00:26:16 +0100 Subject: USB: serial: Updated support for ICOM devices I found the original patch on the db0fhn repeater wiki (couldn't find the email of the origial author) I guess it was never commited. I updated and added some Icom HAM-radio devices to the ftdi driver. Added extra comments to make clear what devices it are. Signed-off-by: Pieter Maes Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 12 +++++++++++- drivers/usb/serial/ftdi_sio_ids.h | 22 +++++++++++++++++----- 2 files changed, 28 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index a2668d089260..4787c0cd063f 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -676,7 +676,17 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) }, - { USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) }, { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index bf0867285481..ed160def8584 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -569,11 +569,23 @@ #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ /* - * Icom ID-1 digital transceiver - */ - -#define ICOM_ID1_VID 0x0C26 -#define ICOM_ID1_PID 0x0004 + * Definitions for Icom Inc. devices + */ +#define ICOM_VID 0x0C26 /* Icom vendor ID */ +/* Note: ID-1 is a communications tranceiver for HAM-radio operators */ +#define ICOM_ID_1_PID 0x0004 /* ID-1 USB to RS-232 */ +/* Note: OPC is an Optional cable to connect an Icom Tranceiver */ +#define ICOM_OPC_U_UC_PID 0x0018 /* OPC-478UC, OPC-1122U cloning cable */ +/* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */ +#define ICOM_ID_RP2C1_PID 0x0009 /* ID-RP2C Asset 1 to RS-232 */ +#define ICOM_ID_RP2C2_PID 0x000A /* ID-RP2C Asset 2 to RS-232 */ +#define ICOM_ID_RP2D_PID 0x000B /* ID-RP2D configuration port*/ +#define ICOM_ID_RP2VT_PID 0x000C /* ID-RP2V Transmit config port */ +#define ICOM_ID_RP2VR_PID 0x000D /* ID-RP2V Receive config port */ +#define ICOM_ID_RP4KVT_PID 0x0010 /* ID-RP4000V Transmit config port */ +#define ICOM_ID_RP4KVR_PID 0x0011 /* ID-RP4000V Receive config port */ +#define ICOM_ID_RP2KVT_PID 0x0012 /* ID-RP2000V Transmit config port */ +#define ICOM_ID_RP2KVR_PID 0x0013 /* ID-RP2000V Receive config port */ /* * GN Otometrics (http://www.otometrics.com) -- cgit v1.2.1 From 15680cdfc69a7277ba87a8a3a3242d67c4ba5916 Mon Sep 17 00:00:00 2001 From: Toshiharu Okada Date: Tue, 18 Jan 2011 20:26:27 +0900 Subject: usb: pch_udc: Fix the worning log issue at gadget driver remove When removing a serial gadget driver, the kernel warning message is outputted. This patch fixed this issue. The pch_udc driver did not have disconnection processing of gadget. Signed-off-by: Toshiharu Okada Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/pch_udc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index cf0e6da724a9..b120dbb64d0f 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -2718,7 +2718,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK); - /* Assues that there are no pending requets with this driver */ + /* Assures that there are no pending requests with this driver */ + driver->disconnect(&dev->gadget); driver->unbind(&dev->gadget); dev->gadget.dev.driver = NULL; dev->driver = NULL; -- cgit v1.2.1 From 49d3df53a80deed2251b91f50ae9e1c5caf7ded7 Mon Sep 17 00:00:00 2001 From: Pavankumar Kondeti Date: Tue, 11 Jan 2011 09:19:21 +0530 Subject: USB: gadget: Fix error path in ci13xxx_udc gadget probe function Don't call gadget driver's unbind when bind is failed. Initialize udc->driver only after gadget driver bind is successful. Otherwise pull-up can be enabled upon VBUS session even when no gadget is bounded. Signed-off-by: Pavankumar Kondeti Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/ci13xxx_udc.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 31656a2b4ab4..b0b90621dc1b 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -2427,7 +2427,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, info("hw_ep_max = %d", hw_ep_max); - udc->driver = driver; udc->gadget.dev.driver = NULL; retval = 0; @@ -2479,6 +2478,7 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, goto done; } + udc->driver = driver; pm_runtime_get_sync(&udc->gadget.dev); if (udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) { if (udc->vbus_active) { @@ -2496,8 +2496,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, done: spin_unlock_irqrestore(udc->lock, flags); - if (retval) - usb_gadget_unregister_driver(driver); return retval; } EXPORT_SYMBOL(usb_gadget_probe_driver); -- cgit v1.2.1 From ca9cfea09fc5802074f79d086547c6363ddc894b Mon Sep 17 00:00:00 2001 From: Pavankumar Kondeti Date: Tue, 11 Jan 2011 09:19:22 +0530 Subject: USB: gadget: Fix endpoint representation in ci13xxx_udc Fix a bug where only half the number of endpoints supported by the hardware are exposed to gadget. If DEN filed in the DCCPARAMS register has 'N' then 'N' IN endpoints and 'N" OUT endpoints can be supported. But only 'N' bidirectional endpoints are added to the gadget ep_list. This patch also ensures that the data and handshake transactions of previous setup packet are flushed upon a new setup packet arrival on ep0. Signed-off-by: Pavankumar Kondeti Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/ci13xxx_udc.c | 264 ++++++++++++++++++++------------------- drivers/usb/gadget/ci13xxx_udc.h | 9 +- 2 files changed, 142 insertions(+), 131 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index b0b90621dc1b..a1c67ae1572a 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -76,10 +76,21 @@ static DEFINE_SPINLOCK(udc_lock); /* control endpoint description */ static const struct usb_endpoint_descriptor -ctrl_endpt_desc = { +ctrl_endpt_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX), +}; + +static const struct usb_endpoint_descriptor +ctrl_endpt_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_CONTROL, .wMaxPacketSize = cpu_to_le16(CTRL_PAYLOAD_MAX), }; @@ -265,10 +276,10 @@ static int hw_device_init(void __iomem *base) hw_bank.size /= sizeof(u32); reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN); - if (reg == 0 || reg > ENDPT_MAX) - return -ENODEV; + hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */ - hw_ep_max = reg; /* cache hw ENDPT_MAX */ + if (hw_ep_max == 0 || hw_ep_max > ENDPT_MAX) + return -ENODEV; /* setup lock mode ? */ @@ -1197,16 +1208,17 @@ static ssize_t show_qheads(struct device *dev, struct device_attribute *attr, } spin_lock_irqsave(udc->lock, flags); - for (i = 0; i < hw_ep_max; i++) { - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; + for (i = 0; i < hw_ep_max/2; i++) { + struct ci13xxx_ep *mEpRx = &udc->ci13xxx_ep[i]; + struct ci13xxx_ep *mEpTx = &udc->ci13xxx_ep[i + hw_ep_max/2]; n += scnprintf(buf + n, PAGE_SIZE - n, "EP=%02i: RX=%08X TX=%08X\n", - i, (u32)mEp->qh[RX].dma, (u32)mEp->qh[TX].dma); + i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma); for (j = 0; j < (sizeof(struct ci13xxx_qh)/sizeof(u32)); j++) { n += scnprintf(buf + n, PAGE_SIZE - n, " %04X: %08X %08X\n", j, - *((u32 *)mEp->qh[RX].ptr + j), - *((u32 *)mEp->qh[TX].ptr + j)); + *((u32 *)mEpRx->qh.ptr + j), + *((u32 *)mEpTx->qh.ptr + j)); } } spin_unlock_irqrestore(udc->lock, flags); @@ -1293,7 +1305,7 @@ static ssize_t show_requests(struct device *dev, struct device_attribute *attr, unsigned long flags; struct list_head *ptr = NULL; struct ci13xxx_req *req = NULL; - unsigned i, j, k, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32); + unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32); dbg_trace("[%s] %p\n", __func__, buf); if (attr == NULL || buf == NULL) { @@ -1303,22 +1315,20 @@ static ssize_t show_requests(struct device *dev, struct device_attribute *attr, spin_lock_irqsave(udc->lock, flags); for (i = 0; i < hw_ep_max; i++) - for (k = RX; k <= TX; k++) - list_for_each(ptr, &udc->ci13xxx_ep[i].qh[k].queue) - { - req = list_entry(ptr, - struct ci13xxx_req, queue); + list_for_each(ptr, &udc->ci13xxx_ep[i].qh.queue) + { + req = list_entry(ptr, struct ci13xxx_req, queue); + n += scnprintf(buf + n, PAGE_SIZE - n, + "EP=%02i: TD=%08X %s\n", + i % hw_ep_max/2, (u32)req->dma, + ((i < hw_ep_max/2) ? "RX" : "TX")); + + for (j = 0; j < qSize; j++) n += scnprintf(buf + n, PAGE_SIZE - n, - "EP=%02i: TD=%08X %s\n", - i, (u32)req->dma, - ((k == RX) ? "RX" : "TX")); - - for (j = 0; j < qSize; j++) - n += scnprintf(buf + n, PAGE_SIZE - n, - " %04X: %08X\n", j, - *((u32 *)req->ptr + j)); - } + " %04X: %08X\n", j, + *((u32 *)req->ptr + j)); + } spin_unlock_irqrestore(udc->lock, flags); return n; @@ -1467,12 +1477,12 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) * At this point it's guaranteed exclusive access to qhead * (endpt is not primed) so it's no need to use tripwire */ - mEp->qh[mEp->dir].ptr->td.next = mReq->dma; /* TERMINATE = 0 */ - mEp->qh[mEp->dir].ptr->td.token &= ~TD_STATUS; /* clear status */ + mEp->qh.ptr->td.next = mReq->dma; /* TERMINATE = 0 */ + mEp->qh.ptr->td.token &= ~TD_STATUS; /* clear status */ if (mReq->req.zero == 0) - mEp->qh[mEp->dir].ptr->cap |= QH_ZLT; + mEp->qh.ptr->cap |= QH_ZLT; else - mEp->qh[mEp->dir].ptr->cap &= ~QH_ZLT; + mEp->qh.ptr->cap &= ~QH_ZLT; wmb(); /* synchronize before ep prime */ @@ -1542,11 +1552,11 @@ __acquires(mEp->lock) hw_ep_flush(mEp->num, mEp->dir); - while (!list_empty(&mEp->qh[mEp->dir].queue)) { + while (!list_empty(&mEp->qh.queue)) { /* pop oldest request */ struct ci13xxx_req *mReq = \ - list_entry(mEp->qh[mEp->dir].queue.next, + list_entry(mEp->qh.queue.next, struct ci13xxx_req, queue); list_del_init(&mReq->queue); mReq->req.status = -ESHUTDOWN; @@ -1571,8 +1581,6 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) { struct usb_ep *ep; struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget); - struct ci13xxx_ep *mEp = container_of(gadget->ep0, - struct ci13xxx_ep, ep); trace("%p", gadget); @@ -1583,7 +1591,8 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) gadget_for_each_ep(ep, gadget) { usb_ep_fifo_flush(ep); } - usb_ep_fifo_flush(gadget->ep0); + usb_ep_fifo_flush(&udc->ep0out.ep); + usb_ep_fifo_flush(&udc->ep0in.ep); udc->driver->disconnect(gadget); @@ -1591,11 +1600,12 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) gadget_for_each_ep(ep, gadget) { usb_ep_disable(ep); } - usb_ep_disable(gadget->ep0); + usb_ep_disable(&udc->ep0out.ep); + usb_ep_disable(&udc->ep0in.ep); - if (mEp->status != NULL) { - usb_ep_free_request(gadget->ep0, mEp->status); - mEp->status = NULL; + if (udc->status != NULL) { + usb_ep_free_request(&udc->ep0in.ep, udc->status); + udc->status = NULL; } return 0; @@ -1614,7 +1624,6 @@ static void isr_reset_handler(struct ci13xxx *udc) __releases(udc->lock) __acquires(udc->lock) { - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[0]; int retval; trace("%p", udc); @@ -1635,11 +1644,15 @@ __acquires(udc->lock) if (retval) goto done; - retval = usb_ep_enable(&mEp->ep, &ctrl_endpt_desc); + retval = usb_ep_enable(&udc->ep0out.ep, &ctrl_endpt_out_desc); + if (retval) + goto done; + + retval = usb_ep_enable(&udc->ep0in.ep, &ctrl_endpt_in_desc); if (!retval) { - mEp->status = usb_ep_alloc_request(&mEp->ep, GFP_ATOMIC); - if (mEp->status == NULL) { - usb_ep_disable(&mEp->ep); + udc->status = usb_ep_alloc_request(&udc->ep0in.ep, GFP_ATOMIC); + if (udc->status == NULL) { + usb_ep_disable(&udc->ep0out.ep); retval = -ENOMEM; } } @@ -1672,16 +1685,17 @@ static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req) /** * isr_get_status_response: get_status request response - * @ep: endpoint + * @udc: udc struct * @setup: setup request packet * * This function returns an error code */ -static int isr_get_status_response(struct ci13xxx_ep *mEp, +static int isr_get_status_response(struct ci13xxx *udc, struct usb_ctrlrequest *setup) __releases(mEp->lock) __acquires(mEp->lock) { + struct ci13xxx_ep *mEp = &udc->ep0in; struct usb_request *req = NULL; gfp_t gfp_flags = GFP_ATOMIC; int dir, num, retval; @@ -1736,27 +1750,23 @@ __acquires(mEp->lock) /** * isr_setup_status_phase: queues the status phase of a setup transation - * @mEp: endpoint + * @udc: udc struct * * This function returns an error code */ -static int isr_setup_status_phase(struct ci13xxx_ep *mEp) +static int isr_setup_status_phase(struct ci13xxx *udc) __releases(mEp->lock) __acquires(mEp->lock) { int retval; + struct ci13xxx_ep *mEp; - trace("%p", mEp); - - /* mEp is always valid & configured */ - - if (mEp->type == USB_ENDPOINT_XFER_CONTROL) - mEp->dir = (mEp->dir == TX) ? RX : TX; + trace("%p", udc); - mEp->status->no_interrupt = 1; + mEp = (udc->ep0_dir == TX) ? &udc->ep0out : &udc->ep0in; spin_unlock(mEp->lock); - retval = usb_ep_queue(&mEp->ep, mEp->status, GFP_ATOMIC); + retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC); spin_lock(mEp->lock); return retval; @@ -1778,11 +1788,11 @@ __acquires(mEp->lock) trace("%p", mEp); - if (list_empty(&mEp->qh[mEp->dir].queue)) + if (list_empty(&mEp->qh.queue)) return -EINVAL; /* pop oldest request */ - mReq = list_entry(mEp->qh[mEp->dir].queue.next, + mReq = list_entry(mEp->qh.queue.next, struct ci13xxx_req, queue); list_del_init(&mReq->queue); @@ -1794,10 +1804,10 @@ __acquires(mEp->lock) dbg_done(_usb_addr(mEp), mReq->ptr->token, retval); - if (!list_empty(&mEp->qh[mEp->dir].queue)) { + if (!list_empty(&mEp->qh.queue)) { struct ci13xxx_req* mReqEnq; - mReqEnq = list_entry(mEp->qh[mEp->dir].queue.next, + mReqEnq = list_entry(mEp->qh.queue.next, struct ci13xxx_req, queue); _hardware_enqueue(mEp, mReqEnq); } @@ -1836,16 +1846,14 @@ __acquires(udc->lock) int type, num, err = -EINVAL; struct usb_ctrlrequest req; - if (mEp->desc == NULL) continue; /* not configured */ - if ((mEp->dir == RX && hw_test_and_clear_complete(i)) || - (mEp->dir == TX && hw_test_and_clear_complete(i + 16))) { + if (hw_test_and_clear_complete(i)) { err = isr_tr_complete_low(mEp); if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { if (err > 0) /* needs status phase */ - err = isr_setup_status_phase(mEp); + err = isr_setup_status_phase(udc); if (err < 0) { dbg_event(_usb_addr(mEp), "ERROR", err); @@ -1866,15 +1874,22 @@ __acquires(udc->lock) continue; } + /* + * Flush data and handshake transactions of previous + * setup packet. + */ + _ep_nuke(&udc->ep0out); + _ep_nuke(&udc->ep0in); + /* read_setup_packet */ do { hw_test_and_set_setup_guard(); - memcpy(&req, &mEp->qh[RX].ptr->setup, sizeof(req)); + memcpy(&req, &mEp->qh.ptr->setup, sizeof(req)); } while (!hw_test_and_clear_setup_guard()); type = req.bRequestType; - mEp->dir = (type & USB_DIR_IN) ? TX : RX; + udc->ep0_dir = (type & USB_DIR_IN) ? TX : RX; dbg_setup(_usb_addr(mEp), &req); @@ -1895,7 +1910,7 @@ __acquires(udc->lock) if (err) break; } - err = isr_setup_status_phase(mEp); + err = isr_setup_status_phase(udc); break; case USB_REQ_GET_STATUS: if (type != (USB_DIR_IN|USB_RECIP_DEVICE) && @@ -1905,7 +1920,7 @@ __acquires(udc->lock) if (le16_to_cpu(req.wLength) != 2 || le16_to_cpu(req.wValue) != 0) break; - err = isr_get_status_response(mEp, &req); + err = isr_get_status_response(udc, &req); break; case USB_REQ_SET_ADDRESS: if (type != (USB_DIR_OUT|USB_RECIP_DEVICE)) @@ -1916,7 +1931,7 @@ __acquires(udc->lock) err = hw_usb_set_address((u8)le16_to_cpu(req.wValue)); if (err) break; - err = isr_setup_status_phase(mEp); + err = isr_setup_status_phase(udc); break; case USB_REQ_SET_FEATURE: if (type != (USB_DIR_OUT|USB_RECIP_ENDPOINT) && @@ -1932,12 +1947,12 @@ __acquires(udc->lock) spin_lock(udc->lock); if (err) break; - err = isr_setup_status_phase(mEp); + err = isr_setup_status_phase(udc); break; default: delegate: if (req.wLength == 0) /* no data phase */ - mEp->dir = TX; + udc->ep0_dir = TX; spin_unlock(udc->lock); err = udc->driver->setup(&udc->gadget, &req); @@ -1968,7 +1983,7 @@ static int ep_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc) { struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); - int direction, retval = 0; + int retval = 0; unsigned long flags; trace("%p, %p", ep, desc); @@ -1982,7 +1997,7 @@ static int ep_enable(struct usb_ep *ep, mEp->desc = desc; - if (!list_empty(&mEp->qh[mEp->dir].queue)) + if (!list_empty(&mEp->qh.queue)) warn("enabling a non-empty endpoint!"); mEp->dir = usb_endpoint_dir_in(desc) ? TX : RX; @@ -1991,29 +2006,22 @@ static int ep_enable(struct usb_ep *ep, mEp->ep.maxpacket = __constant_le16_to_cpu(desc->wMaxPacketSize); - direction = mEp->dir; - do { - dbg_event(_usb_addr(mEp), "ENABLE", 0); - - mEp->qh[mEp->dir].ptr->cap = 0; - - if (mEp->type == USB_ENDPOINT_XFER_CONTROL) - mEp->qh[mEp->dir].ptr->cap |= QH_IOS; - else if (mEp->type == USB_ENDPOINT_XFER_ISOC) - mEp->qh[mEp->dir].ptr->cap &= ~QH_MULT; - else - mEp->qh[mEp->dir].ptr->cap &= ~QH_ZLT; + dbg_event(_usb_addr(mEp), "ENABLE", 0); - mEp->qh[mEp->dir].ptr->cap |= - (mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT; - mEp->qh[mEp->dir].ptr->td.next |= TD_TERMINATE; /* needed? */ + mEp->qh.ptr->cap = 0; - retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type); + if (mEp->type == USB_ENDPOINT_XFER_CONTROL) + mEp->qh.ptr->cap |= QH_IOS; + else if (mEp->type == USB_ENDPOINT_XFER_ISOC) + mEp->qh.ptr->cap &= ~QH_MULT; + else + mEp->qh.ptr->cap &= ~QH_ZLT; - if (mEp->type == USB_ENDPOINT_XFER_CONTROL) - mEp->dir = (mEp->dir == TX) ? RX : TX; + mEp->qh.ptr->cap |= + (mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT; + mEp->qh.ptr->td.next |= TD_TERMINATE; /* needed? */ - } while (mEp->dir != direction); + retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type); spin_unlock_irqrestore(mEp->lock, flags); return retval; @@ -2146,7 +2154,7 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, spin_lock_irqsave(mEp->lock, flags); if (mEp->type == USB_ENDPOINT_XFER_CONTROL && - !list_empty(&mEp->qh[mEp->dir].queue)) { + !list_empty(&mEp->qh.queue)) { _ep_nuke(mEp); retval = -EOVERFLOW; warn("endpoint ctrl %X nuked", _usb_addr(mEp)); @@ -2170,9 +2178,9 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, /* push request */ mReq->req.status = -EINPROGRESS; mReq->req.actual = 0; - list_add_tail(&mReq->queue, &mEp->qh[mEp->dir].queue); + list_add_tail(&mReq->queue, &mEp->qh.queue); - if (list_is_singular(&mEp->qh[mEp->dir].queue)) + if (list_is_singular(&mEp->qh.queue)) retval = _hardware_enqueue(mEp, mReq); if (retval == -EALREADY) { @@ -2199,7 +2207,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) trace("%p, %p", ep, req); if (ep == NULL || req == NULL || mEp->desc == NULL || - list_empty(&mReq->queue) || list_empty(&mEp->qh[mEp->dir].queue)) + list_empty(&mReq->queue) || list_empty(&mEp->qh.queue)) return -EINVAL; spin_lock_irqsave(mEp->lock, flags); @@ -2244,7 +2252,7 @@ static int ep_set_halt(struct usb_ep *ep, int value) #ifndef STALL_IN /* g_file_storage MS compliant but g_zero fails chapter 9 compliance */ if (value && mEp->type == USB_ENDPOINT_XFER_BULK && mEp->dir == TX && - !list_empty(&mEp->qh[mEp->dir].queue)) { + !list_empty(&mEp->qh.queue)) { spin_unlock_irqrestore(mEp->lock, flags); return -EAGAIN; } @@ -2355,7 +2363,7 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) if (is_active) { pm_runtime_get_sync(&_gadget->dev); hw_device_reset(udc); - hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma); + hw_device_state(udc->ep0out.qh.dma); } else { hw_device_state(0); if (udc->udc_driver->notify_event) @@ -2390,7 +2398,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, int (*bind)(struct usb_gadget *)) { struct ci13xxx *udc = _udc; - unsigned long i, k, flags; + unsigned long flags; + int i, j; int retval = -ENOMEM; trace("%p", driver); @@ -2430,41 +2439,43 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, udc->gadget.dev.driver = NULL; retval = 0; - for (i = 0; i < hw_ep_max; i++) { - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; + for (i = 0; i < hw_ep_max/2; i++) { + for (j = RX; j <= TX; j++) { + int k = i + j * hw_ep_max/2; + struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k]; - scnprintf(mEp->name, sizeof(mEp->name), "ep%i", (int)i); + scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i, + (j == TX) ? "in" : "out"); - mEp->lock = udc->lock; - mEp->device = &udc->gadget.dev; - mEp->td_pool = udc->td_pool; + mEp->lock = udc->lock; + mEp->device = &udc->gadget.dev; + mEp->td_pool = udc->td_pool; - mEp->ep.name = mEp->name; - mEp->ep.ops = &usb_ep_ops; - mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; + mEp->ep.name = mEp->name; + mEp->ep.ops = &usb_ep_ops; + mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; - /* this allocation cannot be random */ - for (k = RX; k <= TX; k++) { - INIT_LIST_HEAD(&mEp->qh[k].queue); + INIT_LIST_HEAD(&mEp->qh.queue); spin_unlock_irqrestore(udc->lock, flags); - mEp->qh[k].ptr = dma_pool_alloc(udc->qh_pool, - GFP_KERNEL, - &mEp->qh[k].dma); + mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL, + &mEp->qh.dma); spin_lock_irqsave(udc->lock, flags); - if (mEp->qh[k].ptr == NULL) + if (mEp->qh.ptr == NULL) retval = -ENOMEM; else - memset(mEp->qh[k].ptr, 0, - sizeof(*mEp->qh[k].ptr)); - } - if (i == 0) - udc->gadget.ep0 = &mEp->ep; - else + memset(mEp->qh.ptr, 0, sizeof(*mEp->qh.ptr)); + + /* skip ep0 out and in endpoints */ + if (i == 0) + continue; + list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list); + } } if (retval) goto done; + udc->gadget.ep0 = &udc->ep0in.ep; /* bind gadget */ driver->driver.bus = NULL; udc->gadget.dev.driver = &driver->driver; @@ -2490,7 +2501,7 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, } } - retval = hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma); + retval = hw_device_state(udc->ep0out.qh.dma); if (retval) pm_runtime_put_sync(&udc->gadget.dev); @@ -2508,7 +2519,7 @@ EXPORT_SYMBOL(usb_gadget_probe_driver); int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) { struct ci13xxx *udc = _udc; - unsigned long i, k, flags; + unsigned long i, flags; trace("%p", driver); @@ -2544,17 +2555,14 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) for (i = 0; i < hw_ep_max; i++) { struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; - if (i == 0) - udc->gadget.ep0 = NULL; - else if (!list_empty(&mEp->ep.ep_list)) + if (!list_empty(&mEp->ep.ep_list)) list_del_init(&mEp->ep.ep_list); - for (k = RX; k <= TX; k++) - if (mEp->qh[k].ptr != NULL) - dma_pool_free(udc->qh_pool, - mEp->qh[k].ptr, mEp->qh[k].dma); + if (mEp->qh.ptr != NULL) + dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma); } + udc->gadget.ep0 = NULL; udc->driver = NULL; spin_unlock_irqrestore(udc->lock, flags); diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h index f61fed07f76b..a2492b65f98c 100644 --- a/drivers/usb/gadget/ci13xxx_udc.h +++ b/drivers/usb/gadget/ci13xxx_udc.h @@ -20,7 +20,7 @@ * DEFINE *****************************************************************************/ #define CI13XXX_PAGE_SIZE 4096ul /* page size for TD's */ -#define ENDPT_MAX (16) +#define ENDPT_MAX (32) #define CTRL_PAYLOAD_MAX (64) #define RX (0) /* similar to USB_DIR_OUT but can be used as an index */ #define TX (1) /* similar to USB_DIR_IN but can be used as an index */ @@ -88,8 +88,7 @@ struct ci13xxx_ep { struct list_head queue; struct ci13xxx_qh *ptr; dma_addr_t dma; - } qh[2]; - struct usb_request *status; + } qh; int wedge; /* global resources */ @@ -119,9 +118,13 @@ struct ci13xxx { struct dma_pool *qh_pool; /* DMA pool for queue heads */ struct dma_pool *td_pool; /* DMA pool for transfer descs */ + struct usb_request *status; /* ep0 status request */ struct usb_gadget gadget; /* USB slave device */ struct ci13xxx_ep ci13xxx_ep[ENDPT_MAX]; /* extended endpts */ + u32 ep0_dir; /* ep0 direction */ +#define ep0out ci13xxx_ep[0] +#define ep0in ci13xxx_ep[16] struct usb_gadget_driver *driver; /* 3rd party gadget driver */ struct ci13xxx_udc_driver *udc_driver; /* device controller driver */ -- cgit v1.2.1 From d14fc1a74e846d7851f24fc9519fe87dc12a1231 Mon Sep 17 00:00:00 2001 From: Libor Pechacek Date: Fri, 14 Jan 2011 14:30:21 +0100 Subject: USB: serial: handle Data Carrier Detect changes Alan's commit 335f8514f200e63d689113d29cb7253a5c282967 introduced .carrier_raised function in several drivers. That also means tty_port_block_til_ready can now suspend the process trying to open the serial port when Carrier Detect is low and put it into tty_port.open_wait queue. We need to wake up the process when Carrier Detect goes high and trigger TTY hangup when CD goes low. Some of the devices do not report modem status line changes, or at least we don't understand the status message, so for those we remove .carrier_raised again. Signed-off-by: Libor Pechacek Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ch341.c | 10 ++++++++++ drivers/usb/serial/cp210x.c | 13 +------------ drivers/usb/serial/digi_acceleport.c | 10 ---------- drivers/usb/serial/generic.c | 20 ++++++++++++++++++++ drivers/usb/serial/keyspan_pda.c | 17 ----------------- drivers/usb/serial/pl2303.c | 11 +++++++++++ drivers/usb/serial/spcp8x5.c | 6 +++++- 7 files changed, 47 insertions(+), 40 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 63f7cc45bcac..7b8815ddf368 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -486,12 +486,22 @@ static void ch341_read_int_callback(struct urb *urb) if (actual_length >= 4) { struct ch341_private *priv = usb_get_serial_port_data(port); unsigned long flags; + u8 prev_line_status = priv->line_status; spin_lock_irqsave(&priv->lock, flags); priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT; if ((data[1] & CH341_MULT_STAT)) priv->multi_status_change = 1; spin_unlock_irqrestore(&priv->lock, flags); + + if ((priv->line_status ^ prev_line_status) & CH341_BIT_DCD) { + struct tty_struct *tty = tty_port_tty_get(&port->port); + if (tty) + usb_serial_handle_dcd_change(port, tty, + priv->line_status & CH341_BIT_DCD); + tty_kref_put(tty); + } + wake_up_interruptible(&priv->delta_msr_wait); } diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index c3bea46e87fb..735ea03157ab 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -49,7 +49,6 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *, static void cp210x_break_ctl(struct tty_struct *, int); static int cp210x_startup(struct usb_serial *); static void cp210x_dtr_rts(struct usb_serial_port *p, int on); -static int cp210x_carrier_raised(struct usb_serial_port *p); static int debug; @@ -166,8 +165,7 @@ static struct usb_serial_driver cp210x_device = { .tiocmget = cp210x_tiocmget, .tiocmset = cp210x_tiocmset, .attach = cp210x_startup, - .dtr_rts = cp210x_dtr_rts, - .carrier_raised = cp210x_carrier_raised + .dtr_rts = cp210x_dtr_rts }; /* Config request types */ @@ -766,15 +764,6 @@ static int cp210x_tiocmget (struct tty_struct *tty, struct file *file) return result; } -static int cp210x_carrier_raised(struct usb_serial_port *p) -{ - unsigned int control; - cp210x_get_config(p, CP210X_GET_MDMSTS, &control, 1); - if (control & CONTROL_DCD) - return 1; - return 0; -} - static void cp210x_break_ctl (struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index b92070c103cd..666e5a6edd82 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -455,7 +455,6 @@ static int digi_write_room(struct tty_struct *tty); static int digi_chars_in_buffer(struct tty_struct *tty); static int digi_open(struct tty_struct *tty, struct usb_serial_port *port); static void digi_close(struct usb_serial_port *port); -static int digi_carrier_raised(struct usb_serial_port *port); static void digi_dtr_rts(struct usb_serial_port *port, int on); static int digi_startup_device(struct usb_serial *serial); static int digi_startup(struct usb_serial *serial); @@ -511,7 +510,6 @@ static struct usb_serial_driver digi_acceleport_2_device = { .open = digi_open, .close = digi_close, .dtr_rts = digi_dtr_rts, - .carrier_raised = digi_carrier_raised, .write = digi_write, .write_room = digi_write_room, .write_bulk_callback = digi_write_bulk_callback, @@ -1339,14 +1337,6 @@ static void digi_dtr_rts(struct usb_serial_port *port, int on) digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1); } -static int digi_carrier_raised(struct usb_serial_port *port) -{ - struct digi_port *priv = usb_get_serial_port_data(port); - if (priv->dp_modem_signals & TIOCM_CD) - return 1; - return 0; -} - static int digi_open(struct tty_struct *tty, struct usb_serial_port *port) { int ret; diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index e6833e216fc9..e4db5ad2bc55 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -479,6 +479,26 @@ int usb_serial_handle_break(struct usb_serial_port *port) } EXPORT_SYMBOL_GPL(usb_serial_handle_break); +/** + * usb_serial_handle_dcd_change - handle a change of carrier detect state + * @port: usb_serial_port structure for the open port + * @tty: tty_struct structure for the port + * @status: new carrier detect status, nonzero if active + */ +void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port, + struct tty_struct *tty, unsigned int status) +{ + struct tty_port *port = &usb_port->port; + + dbg("%s - port %d, status %d", __func__, usb_port->number, status); + + if (status) + wake_up_interruptible(&port->open_wait); + else if (tty && !C_CLOCAL(tty)) + tty_hangup(tty); +} +EXPORT_SYMBOL_GPL(usb_serial_handle_dcd_change); + int usb_serial_generic_resume(struct usb_serial *serial) { struct usb_serial_port *port; diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index a10dd5676ccc..554a8693a463 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -679,22 +679,6 @@ static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on) } } -static int keyspan_pda_carrier_raised(struct usb_serial_port *port) -{ - struct usb_serial *serial = port->serial; - unsigned char modembits; - - /* If we can read the modem status and the DCD is low then - carrier is not raised yet */ - if (keyspan_pda_get_modem_info(serial, &modembits) >= 0) { - if (!(modembits & (1>>6))) - return 0; - } - /* Carrier raised, or we failed (eg disconnected) so - progress accordingly */ - return 1; -} - static int keyspan_pda_open(struct tty_struct *tty, struct usb_serial_port *port) @@ -881,7 +865,6 @@ static struct usb_serial_driver keyspan_pda_device = { .id_table = id_table_std, .num_ports = 1, .dtr_rts = keyspan_pda_dtr_rts, - .carrier_raised = keyspan_pda_carrier_raised, .open = keyspan_pda_open, .close = keyspan_pda_close, .write = keyspan_pda_write, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 45c40e6e9737..08c9181b8e48 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -678,9 +678,11 @@ static void pl2303_update_line_status(struct usb_serial_port *port, { struct pl2303_private *priv = usb_get_serial_port_data(port); + struct tty_struct *tty; unsigned long flags; u8 status_idx = UART_STATE; u8 length = UART_STATE + 1; + u8 prev_line_status; u16 idv, idp; idv = le16_to_cpu(port->serial->dev->descriptor.idVendor); @@ -702,11 +704,20 @@ static void pl2303_update_line_status(struct usb_serial_port *port, /* Save off the uart status for others to look at */ spin_lock_irqsave(&priv->lock, flags); + prev_line_status = priv->line_status; priv->line_status = data[status_idx]; spin_unlock_irqrestore(&priv->lock, flags); if (priv->line_status & UART_BREAK_ERROR) usb_serial_handle_break(port); wake_up_interruptible(&priv->delta_msr_wait); + + tty = tty_port_tty_get(&port->port); + if (!tty) + return; + if ((priv->line_status ^ prev_line_status) & UART_DCD) + usb_serial_handle_dcd_change(port, tty, + priv->line_status & UART_DCD); + tty_kref_put(tty); } static void pl2303_read_int_callback(struct urb *urb) diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index c7665d39d192..cbfb70bffdd0 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -133,7 +133,7 @@ struct spcp8x5_usb_ctrl_arg { /* how come ??? */ #define UART_STATE 0x08 -#define UART_STATE_TRANSIENT_MASK 0x74 +#define UART_STATE_TRANSIENT_MASK 0x75 #define UART_DCD 0x01 #define UART_DSR 0x02 #define UART_BREAK_ERROR 0x04 @@ -525,6 +525,10 @@ static void spcp8x5_process_read_urb(struct urb *urb) /* overrun is special, not associated with a char */ if (status & UART_OVERRUN_ERROR) tty_insert_flip_char(tty, 0, TTY_OVERRUN); + + if (status & UART_DCD) + usb_serial_handle_dcd_change(port, tty, + priv->line_status & MSR_STATUS_LINE_DCD); } tty_insert_flip_string_fixed_flag(tty, data, tty_flag, -- cgit v1.2.1 From 3c47eb06f08eb970ea9d696bcdb57a175d37b470 Mon Sep 17 00:00:00 2001 From: Maulik Mankad Date: Thu, 13 Jan 2011 18:19:56 +0530 Subject: usb: gadget: composite: avoid access beyond array max length One of the USB CV MSC tests issues Get Max LUN request with invalid wIndex (wIndex = 65535) parameter. Add proper handling to prevent array index out of bounds issue. Signed-off-by: Maulik Mankad Cc: David Brownell Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/composite.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index f6ff8456d52d..1ba4befe336b 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -928,8 +928,9 @@ unknown: */ switch (ctrl->bRequestType & USB_RECIP_MASK) { case USB_RECIP_INTERFACE: - if (cdev->config) - f = cdev->config->interface[intf]; + if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES) + break; + f = cdev->config->interface[intf]; break; case USB_RECIP_ENDPOINT: -- cgit v1.2.1 From c55c63c6539499379ab4a7e8a5c0f857351fb946 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 7 Jan 2011 09:57:41 +1000 Subject: vt: fix issue when fbcon wants to takeover a second time. With framebuffer handover and multiple GPUs, we get into a position where the fbcon unbinds the vesafb framebuffer for GPU 1, but we still have a radeon framebuffer bound from GPU 0, so we don't unregister the console driver. Then when we tried to bind the new radeon framebuffer for GPU1 we never get to the bind call as we fail due to the console being registered already. This changes the return value to -EBUSY when the driver is already registered and continues to bind for -EBUSY. Signed-off-by: Dave Airlie Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 76407eca9ab0..4f6ae05eb4f9 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -3545,7 +3545,7 @@ int register_con_driver(const struct consw *csw, int first, int last) /* already registered */ if (con_driver->con == csw) - retval = -EINVAL; + retval = -EBUSY; } if (retval) @@ -3656,7 +3656,12 @@ int take_over_console(const struct consw *csw, int first, int last, int deflt) int err; err = register_con_driver(csw, first, last); - + /* if we get an busy error we still want to bind the console driver + * and return success, as we may have unbound the console driver +  * but not unregistered it. + */ + if (err == -EBUSY) + err = 0; if (!err) bind_con_driver(csw, first, last, deflt); -- cgit v1.2.1 From a2a6a822adc2a91c677cb60e9bc6ffe26fa90e9f Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Sun, 9 Jan 2011 16:39:14 +0100 Subject: tty: use for_each_console() and WARN() on sysfs failures This fixes the build warnings in the tty code, and uses the proper function for iterating over the console devices. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 4 ++-- drivers/tty/vt/vt.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 464d09d97873..dae6fc96182c 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -3257,7 +3257,7 @@ static ssize_t show_cons_active(struct device *dev, ssize_t count = 0; acquire_console_sem(); - for (c = console_drivers; c; c = c->next) { + for_each_console(c) { if (!c->device) continue; if (!c->write) @@ -3306,7 +3306,7 @@ int __init tty_init(void) if (IS_ERR(consdev)) consdev = NULL; else - device_create_file(consdev, &dev_attr_active); + WARN_ON(device_create_file(consdev, &dev_attr_active) < 0); #ifdef CONFIG_VT vty_init(&console_fops); diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 4f6ae05eb4f9..955061863ed8 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -2994,7 +2994,7 @@ int __init vty_init(const struct file_operations *console_fops) if (IS_ERR(tty0dev)) tty0dev = NULL; else - device_create_file(tty0dev, &dev_attr_active); + WARN_ON(device_create_file(tty0dev, &dev_attr_active) < 0); vcs_init(); -- cgit v1.2.1 From d0694e2aeb815042aa0f3e5036728b3db4446f1d Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Sun, 9 Jan 2011 08:38:48 +0100 Subject: serial: unbreak billionton CF card Unbreak Billionton CF bluetooth card. This actually fixes a regression on zaurus. Signed-off-by: Pavel Machek Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index b25e6e490530..3975df6f7fdb 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -236,7 +236,8 @@ static const struct serial8250_config uart_config[] = { .fifo_size = 128, .tx_loadsz = 128, .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + /* UART_CAP_EFR breaks billionon CF bluetooth card. */ + .flags = UART_CAP_FIFO | UART_CAP_SLEEP, }, [PORT_16654] = { .name = "ST16654", -- cgit v1.2.1 From 1035b63d3c6fc34a9b8c4a181366eec6d6158b31 Mon Sep 17 00:00:00 2001 From: Paul Fulghum Date: Tue, 18 Jan 2011 14:03:25 -0800 Subject: n_hdlc: fix read and write locking Fix locking in read and write code of n_hdlc line discipline. 2.6.36 replaced lock_kernel() with tty_lock(). The tty mutex is not dropped automatically when the thread sleeps like the BKL. This results in a blocked read or write holding the tty mutex and stalling operations by other devices that use the tty mutex. A review of n_hdlc read and write code shows: 1. neither BKL or tty mutex are required for correct operation 2. read can block while read data is available if data is posted between availability check and call to interruptible_sleep_on() 3. write does not set process state to TASK_INTERRUPTIBLE on each pass through the processing loop which can cause unneeded scheduling of the thread The unnecessary tty mutex references have been removed. Read changed to use same code as n_tty read for completing reads and blocking. Write corrected to set process state to TASK_INTERRUPTIBLE on each pass through processing loop. Signed-off-by: Paul Fulghum Acked-by: Arnd Bergmann Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/tty/n_hdlc.c | 90 ++++++++++++++++++++++++++-------------------------- 1 file changed, 45 insertions(+), 45 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index 47d32281032c..52fc0c9a6364 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -581,8 +581,9 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, __u8 __user *buf, size_t nr) { struct n_hdlc *n_hdlc = tty2n_hdlc(tty); - int ret; + int ret = 0; struct n_hdlc_buf *rbuf; + DECLARE_WAITQUEUE(wait, current); if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__); @@ -598,57 +599,55 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, return -EFAULT; } - tty_lock(); + add_wait_queue(&tty->read_wait, &wait); for (;;) { if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { - tty_unlock(); - return -EIO; + ret = -EIO; + break; } + if (tty_hung_up_p(file)) + break; - n_hdlc = tty2n_hdlc (tty); - if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC || - tty != n_hdlc->tty) { - tty_unlock(); - return 0; - } + set_current_state(TASK_INTERRUPTIBLE); rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list); - if (rbuf) + if (rbuf) { + if (rbuf->count > nr) { + /* too large for caller's buffer */ + ret = -EOVERFLOW; + } else { + if (copy_to_user(buf, rbuf->buf, rbuf->count)) + ret = -EFAULT; + else + ret = rbuf->count; + } + + if (n_hdlc->rx_free_buf_list.count > + DEFAULT_RX_BUF_COUNT) + kfree(rbuf); + else + n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf); break; + } /* no data */ if (file->f_flags & O_NONBLOCK) { - tty_unlock(); - return -EAGAIN; + ret = -EAGAIN; + break; } - - interruptible_sleep_on (&tty->read_wait); + + schedule(); + if (signal_pending(current)) { - tty_unlock(); - return -EINTR; + ret = -EINTR; + break; } } - - if (rbuf->count > nr) - /* frame too large for caller's buffer (discard frame) */ - ret = -EOVERFLOW; - else { - /* Copy the data to the caller's buffer */ - if (copy_to_user(buf, rbuf->buf, rbuf->count)) - ret = -EFAULT; - else - ret = rbuf->count; - } - - /* return HDLC buffer to free list unless the free list */ - /* count has exceeded the default value, in which case the */ - /* buffer is freed back to the OS to conserve memory */ - if (n_hdlc->rx_free_buf_list.count > DEFAULT_RX_BUF_COUNT) - kfree(rbuf); - else - n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,rbuf); - tty_unlock(); + + remove_wait_queue(&tty->read_wait, &wait); + __set_current_state(TASK_RUNNING); + return ret; } /* end of n_hdlc_tty_read() */ @@ -691,14 +690,15 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, count = maxframe; } - tty_lock(); - add_wait_queue(&tty->write_wait, &wait); - set_current_state(TASK_INTERRUPTIBLE); + + for (;;) { + set_current_state(TASK_INTERRUPTIBLE); - /* Allocate transmit buffer */ - /* sleep until transmit buffer available */ - while (!(tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list))) { + tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list); + if (tbuf) + break; + if (file->f_flags & O_NONBLOCK) { error = -EAGAIN; break; @@ -719,7 +719,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, } } - set_current_state(TASK_RUNNING); + __set_current_state(TASK_RUNNING); remove_wait_queue(&tty->write_wait, &wait); if (!error) { @@ -731,7 +731,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf); n_hdlc_send_frames(n_hdlc,tty); } - tty_unlock(); + return error; } /* end of n_hdlc_tty_write() */ -- cgit v1.2.1 From fed7bb324cffd980a4a576514ced3ff52f68f319 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 19 Jan 2011 14:34:35 -0800 Subject: tty/serial: fix apbuart build Fix build errors by selecting SERIAL_CORE: ERROR: "uart_register_driver" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_write_wakeup" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_update_timeout" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_get_divisor" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_get_baud_rate" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_add_one_port" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_unregister_driver" [drivers/tty/serial/apbuart.ko] undefined! ERROR: "uart_remove_one_port" [drivers/tty/serial/apbuart.ko] undefined! Signed-off-by: Randy Dunlap Cc: Daniel Hellstrom Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index b1682d7f1d8a..2b8334601c8b 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1518,6 +1518,7 @@ config SERIAL_BCM63XX_CONSOLE config SERIAL_GRLIB_GAISLER_APBUART tristate "GRLIB APBUART serial support" depends on OF + select SERIAL_CORE ---help--- Add support for the GRLIB APBUART serial port. -- cgit v1.2.1 From 9b310acc335cb0da7d743e2b60f999587beb6496 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 22 Jan 2011 20:16:12 -0800 Subject: rapidio: fix new kernel-doc warnings Fix new rapidio kernel-doc warnings: Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev' Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev_port' Signed-off-by: Randy Dunlap Cc: Alexandre Bounine Cc: Matt Porter Signed-off-by: Linus Torvalds --- drivers/rapidio/rio-scan.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index 467e82bd0929..a50391b6ba2a 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -943,6 +943,8 @@ static int rio_enum_complete(struct rio_mport *port) * @port: Master port to send transactions * @destid: Current destination ID in network * @hopcount: Number of hops into the network + * @prev: previous rio_dev + * @prev_port: previous port number * * Recursively discovers a RIO network. Transactions are sent via the * master port passed in @port. -- cgit v1.2.1 From 076e2c0eb83f1a0e2e7d0ae1e4d4c0f7b13f1f64 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 21 Jan 2011 10:07:18 +0000 Subject: drm/i915: Fix use of invalid array size for ring->sync_seqno There are I915_NUM_RINGS-1 inter-ring synchronisation counters, but we were clearing I915_NUM_RINGS of them. Oops. Reported-by: Jiri Slaby Tested-by: Jiri Slaby Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_gem.c | 2 +- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 3dfc848ff755..812b97b47469 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1857,7 +1857,7 @@ i915_gem_retire_requests_ring(struct drm_device *dev, seqno = ring->get_seqno(ring); - for (i = 0; i < I915_NUM_RINGS; i++) + for (i = 0; i < ARRAY_SIZE(ring->sync_seqno); i++) if (seqno >= ring->sync_seqno[i]) ring->sync_seqno[i] = 0; diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index dcfdf4151b6d..d2f445e825f2 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -1175,7 +1175,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, goto err; seqno = i915_gem_next_request_seqno(dev, ring); - for (i = 0; i < I915_NUM_RINGS-1; i++) { + for (i = 0; i < ARRAY_SIZE(ring->sync_seqno); i++) { if (seqno < ring->sync_seqno[i]) { /* The GPU can not handle its semaphore value wrapping, * so every billion or so execbuffers, we need to stall -- cgit v1.2.1 From 934f992c763ae1e5eefcce8af769c16444085df7 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 20 Jan 2011 13:09:12 +0000 Subject: drm/i915: Recognise non-VGA display devices Starting with SandyBridge (though possible with earlier hacked BIOSes), the BIOS may initialise the IGFX as secondary to a discrete GPU. Prior, it would simply disable the integrated GPU. So we adjust our PCI class mask to match any DISPLAY_CLASS device. In such a configuration, the IGFX is not a primary VGA controller and so should not take part in VGA arbitration, and the error return from vga_client_register() is expected. Signed-off-by: Chris Wilson Cc: stable@kernel.org --- drivers/gpu/drm/i915/i915_dma.c | 10 ++++++++-- drivers/gpu/drm/i915/i915_drv.c | 2 +- drivers/gpu/vga/vgaarb.c | 2 +- 3 files changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 665898124200..17bd766f2081 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1215,9 +1215,15 @@ static int i915_load_modeset_init(struct drm_device *dev) if (ret) DRM_INFO("failed to find VBIOS tables\n"); - /* if we have > 1 VGA cards, then disable the radeon VGA resources */ + /* If we have > 1 VGA cards, then we need to arbitrate access + * to the common VGA resources. + * + * If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA), + * then we do not take part in VGA arbitration and the + * vga_client_register() fails with -ENODEV. + */ ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode); - if (ret) + if (ret && ret != -ENODEV) goto cleanup_ringbuffer; intel_register_dsm_handler(); diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 72fea2bcfc4f..59eb19b13b3f 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -60,7 +60,7 @@ extern int intel_agp_enabled; #define INTEL_VGA_DEVICE(id, info) { \ .class = PCI_CLASS_DISPLAY_VGA << 8, \ - .class_mask = 0xffff00, \ + .class_mask = 0xff0000, \ .vendor = 0x8086, \ .device = id, \ .subvendor = PCI_ANY_ID, \ diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c index c380c65da417..ace2b1623b21 100644 --- a/drivers/gpu/vga/vgaarb.c +++ b/drivers/gpu/vga/vgaarb.c @@ -636,7 +636,7 @@ int vga_client_register(struct pci_dev *pdev, void *cookie, void (*irq_set_state)(void *cookie, bool state), unsigned int (*set_vga_decode)(void *cookie, bool decode)) { - int ret = -1; + int ret = -ENODEV; struct vga_device *vgadev; unsigned long flags; -- cgit v1.2.1 From 9d1f8a40ddab65a5cedb69b369ee4c0c6e4acf6b Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sat, 22 Jan 2011 20:55:39 +0100 Subject: hwmon: (applesmc) Properly initialize lockdep attributes The switch to dynamically allocated sysfs attributes left the internal lockdep members uninitialized, causing a formal bug. This patch adds sysfs_attr_init() to the node creation function, remedying the problem. Reported-and-tested-by: Stefan Richter Signed-off-by: Henrik Rydberg Signed-off-by: Guenter Roeck --- drivers/hwmon/applesmc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index ce0372f0615e..4c0743660e9c 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -1072,6 +1072,7 @@ static int applesmc_create_nodes(struct applesmc_node_group *groups, int num) node->sda.dev_attr.show = grp->show; node->sda.dev_attr.store = grp->store; attr = &node->sda.dev_attr.attr; + sysfs_attr_init(attr); attr->name = node->name; attr->mode = S_IRUGO | (grp->store ? S_IWUSR : 0); ret = sysfs_create_file(&pdev->dev.kobj, attr); -- cgit v1.2.1 From 86ca33e82597c0aeb15fbdfb9619e86ef6b0f704 Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Sat, 22 Jan 2011 16:07:11 +0100 Subject: hwmon: (asus_atk0110) Override interface detection on Sabertooth X58 ASUS Sabertooth X58 has a bug in ACPI that prevents the reading of MCH temperature when the "old" ATK0110 interface is used. Add a DMI entry to override the detection heuristic and force the use of the "new" interface on this board. Signed-off-by: Luca Tettamanti Tested-by: Joris Creyghton Signed-off-by: Guenter Roeck --- drivers/hwmon/asus_atk0110.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c index 2d68cf3c223b..b5e892017e0c 100644 --- a/drivers/hwmon/asus_atk0110.c +++ b/drivers/hwmon/asus_atk0110.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -22,6 +23,21 @@ #define ATK_HID "ATK0110" +static bool new_if; +module_param(new_if, bool, 0); +MODULE_PARM_DESC(new_if, "Override detection heuristic and force the use of the new ATK0110 interface"); + +static const struct dmi_system_id __initconst atk_force_new_if[] = { + { + /* Old interface has broken MCH temp monitoring */ + .ident = "Asus Sabertooth X58", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "SABERTOOTH X58") + } + }, + { } +}; + /* Minimum time between readings, enforced in order to avoid * hogging the CPU. */ @@ -1302,7 +1318,9 @@ static int atk_probe_if(struct atk_data *data) * analysis of multiple DSDTs indicates that when both interfaces * are present the new one (GGRP/GITM) is not functional. */ - if (data->rtmp_handle && data->rvlt_handle && data->rfan_handle) + if (new_if) + dev_info(dev, "Overriding interface detection\n"); + if (data->rtmp_handle && data->rvlt_handle && data->rfan_handle && !new_if) data->old_interface = true; else if (data->enumerate_handle && data->read_handle && data->write_handle) @@ -1420,6 +1438,9 @@ static int __init atk0110_init(void) return -EBUSY; } + if (dmi_check_system(atk_force_new_if)) + new_if = true; + ret = acpi_bus_register_driver(&atk_driver); if (ret) pr_info("acpi_bus_register_driver failed: %d\n", ret); -- cgit v1.2.1 From c4ff4b829ef9e6353c0b133b7adb564a68054979 Mon Sep 17 00:00:00 2001 From: Rajiv Andrade Date: Fri, 12 Nov 2010 22:30:02 +0100 Subject: TPM: Long default timeout fix If duration variable value is 0 at this point, it's because chip->vendor.duration wasn't filled by tpm_get_timeouts() yet. This patch sets then the lowest timeout just to give enough time for tpm_get_timeouts() to further succeed. This fix avoids long boot times in case another entity attempts to send commands to the TPM when the TPM isn't accessible. Signed-off-by: Rajiv Andrade Signed-off-by: James Morris --- drivers/char/tpm/tpm.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 1f46f1cd9225..36e0fa161c2b 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -364,12 +364,14 @@ unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip, tpm_protected_ordinal_duration[ordinal & TPM_PROTECTED_ORDINAL_MASK]; - if (duration_idx != TPM_UNDEFINED) + if (duration_idx != TPM_UNDEFINED) { duration = chip->vendor.duration[duration_idx]; - if (duration <= 0) + /* if duration is 0, it's because chip->vendor.duration wasn't */ + /* filled yet, so we set the lowest timeout just to give enough */ + /* time for tpm_get_timeouts() to succeed */ + return (duration <= 0 ? HZ : duration); + } else return 2 * 60 * HZ; - else - return duration; } EXPORT_SYMBOL_GPL(tpm_calc_ordinal_duration); -- cgit v1.2.1 From e5cce6c13c25d9ac56955a3ae2fd562719848172 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Thu, 6 Jan 2011 21:24:01 -0600 Subject: tpm: fix panic caused by "tpm: Autodetect itpm devices" commit 3f0d3d016d89a5efb8b926d4707eb21fa13f3d27 adds a check for PNP device id to the common tpm_tis_init() function, which in some cases (force=1) will be called without the device being a member of a pnp_dev. Oopsing and panics ensue. Move the test up to before the call to tpm_tis_init(), since it just modifies a global variable anyway. Signed-off-by: Olof Johansson Acked-by: Rajiv Andrade Signed-off-by: James Morris --- drivers/char/tpm/tpm_tis.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index c17a305ecb28..dd21df55689d 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -493,9 +493,6 @@ static int tpm_tis_init(struct device *dev, resource_size_t start, "1.2 TPM (device-id 0x%X, rev-id %d)\n", vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0))); - if (is_itpm(to_pnp_dev(dev))) - itpm = 1; - if (itpm) dev_info(dev, "Intel iTPM workaround enabled\n"); @@ -637,6 +634,9 @@ static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev, else interrupts = 0; + if (is_itpm(pnp_dev)) + itpm = 1; + return tpm_tis_init(&pnp_dev->dev, start, len, irq); } -- cgit v1.2.1 From 29d9ebc4820ee4e03776ddd9a34f3d0097595405 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Tue, 11 Jan 2011 10:44:54 +0100 Subject: drm/radeon/kms: Initialize pageflip spinlocks. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I'm amazed but not really surprised this worked on x86... Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_irq_kms.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c index a289646e8aa4..9ec830c77af0 100644 --- a/drivers/gpu/drm/radeon/radeon_irq_kms.c +++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c @@ -110,11 +110,14 @@ void radeon_driver_irq_uninstall_kms(struct drm_device *dev) int radeon_irq_kms_init(struct radeon_device *rdev) { + int i; int r = 0; INIT_WORK(&rdev->hotplug_work, radeon_hotplug_work_func); spin_lock_init(&rdev->irq.sw_lock); + for (i = 0; i < rdev->num_crtc; i++) + spin_lock_init(&rdev->irq.pflip_lock[i]); r = drm_vblank_init(rdev->ddev, rdev->num_crtc); if (r) { return r; -- cgit v1.2.1 From 369d7ec14cf2a07d3c7826d806f61477866ba523 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 17 Jan 2011 18:08:58 +0000 Subject: drm/radeon/kms: fix a spelling error in an error message Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 46da5142b131..5968dde243e9 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3522,7 +3522,7 @@ int r100_ring_test(struct radeon_device *rdev) if (i < rdev->usec_timeout) { DRM_INFO("ring test succeeded in %d usecs\n", i); } else { - DRM_ERROR("radeon: ring test failed (sracth(0x%04X)=0x%08X)\n", + DRM_ERROR("radeon: ring test failed (scratch(0x%04X)=0x%08X)\n", scratch, tmp); r = -EINVAL; } -- cgit v1.2.1 From be23da8ad219650517cbbb7acbeaeb235667113a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 18 Jan 2011 18:26:11 +0000 Subject: drm/radeon/kms: make the mac rv630 quirk generic Seems some other boards do this as well. Reported-by: Andrea Merello Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 1573202a6418..52777902bbcc 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -387,15 +387,11 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev, *line_mux = 0x90; } - /* mac rv630 */ - if ((dev->pdev->device == 0x9588) && - (dev->pdev->subsystem_vendor == 0x106b) && - (dev->pdev->subsystem_device == 0x00a6)) { - if ((supported_device == ATOM_DEVICE_TV1_SUPPORT) && - (*connector_type == DRM_MODE_CONNECTOR_DVII)) { - *connector_type = DRM_MODE_CONNECTOR_9PinDIN; - *line_mux = CONNECTOR_7PIN_DIN_ENUM_ID1; - } + /* mac rv630, rv730, others */ + if ((supported_device == ATOM_DEVICE_TV1_SUPPORT) && + (*connector_type == DRM_MODE_CONNECTOR_DVII)) { + *connector_type = DRM_MODE_CONNECTOR_9PinDIN; + *line_mux = CONNECTOR_7PIN_DIN_ENUM_ID1; } /* ASUS HD 3600 XT board lists the DVI port as HDMI */ -- cgit v1.2.1 From 8d96fe9381fa235a81c73c8f940e2fcc84f41caf Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 21 Jan 2011 15:38:22 +0000 Subject: drm/radeon/kms: match r6xx/r7xx/evergreen asic_reset with previous asics Don't reset if the engine isn't busy. This matches the behavior of previous asics. Reseting a non-hung block can lead to a hang. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=33272 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen.c | 3 +++ drivers/gpu/drm/radeon/r600.c | 3 +++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index a8973acb3987..677af91b555c 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -2201,6 +2201,9 @@ static int evergreen_gpu_soft_reset(struct radeon_device *rdev) struct evergreen_mc_save save; u32 grbm_reset = 0; + if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE)) + return 0; + dev_info(rdev->dev, "GPU softreset \n"); dev_info(rdev->dev, " GRBM_STATUS=0x%08X\n", RREG32(GRBM_STATUS)); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index aca2236268fa..1e10e3e2ba2a 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1287,6 +1287,9 @@ int r600_gpu_soft_reset(struct radeon_device *rdev) S_008014_CB2_BUSY(1) | S_008014_CB3_BUSY(1); u32 tmp; + if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE)) + return 0; + dev_info(rdev->dev, "GPU softreset \n"); dev_info(rdev->dev, " R_008010_GRBM_STATUS=0x%08X\n", RREG32(R_008010_GRBM_STATUS)); -- cgit v1.2.1 From b526ce2264e93b64853478ae50725a30c1dc7abf Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 20 Jan 2011 23:35:58 +0000 Subject: drm/radeon/kms: simplify atom adjust pll setup Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 22 +++++----------------- 1 file changed, 5 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index b0ab185b86f6..d3ca17080df7 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -606,14 +606,9 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, args.v1.usPixelClock = cpu_to_le16(mode->clock / 10); args.v1.ucTransmitterID = radeon_encoder->encoder_id; args.v1.ucEncodeMode = encoder_mode; - if (encoder_mode == ATOM_ENCODER_MODE_DP) { - if (ss_enabled) - args.v1.ucConfig |= - ADJUST_DISPLAY_CONFIG_SS_ENABLE; - } else if (encoder_mode == ATOM_ENCODER_MODE_LVDS) { + if (ss_enabled) args.v1.ucConfig |= ADJUST_DISPLAY_CONFIG_SS_ENABLE; - } atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); @@ -624,12 +619,12 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, args.v3.sInput.ucTransmitterID = radeon_encoder->encoder_id; args.v3.sInput.ucEncodeMode = encoder_mode; args.v3.sInput.ucDispPllConfig = 0; + if (ss_enabled) + args.v3.sInput.ucDispPllConfig |= + DISPPLL_CONFIG_SS_ENABLE; if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) { struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; if (encoder_mode == ATOM_ENCODER_MODE_DP) { - if (ss_enabled) - args.v3.sInput.ucDispPllConfig |= - DISPPLL_CONFIG_SS_ENABLE; args.v3.sInput.ucDispPllConfig |= DISPPLL_CONFIG_COHERENT_MODE; /* 16200 or 27000 */ @@ -649,18 +644,11 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, } } else if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { if (encoder_mode == ATOM_ENCODER_MODE_DP) { - if (ss_enabled) - args.v3.sInput.ucDispPllConfig |= - DISPPLL_CONFIG_SS_ENABLE; args.v3.sInput.ucDispPllConfig |= DISPPLL_CONFIG_COHERENT_MODE; /* 16200 or 27000 */ args.v3.sInput.usPixelClock = cpu_to_le16(dp_clock / 10); - } else if (encoder_mode == ATOM_ENCODER_MODE_LVDS) { - if (ss_enabled) - args.v3.sInput.ucDispPllConfig |= - DISPPLL_CONFIG_SS_ENABLE; - } else { + } else if (encoder_mode != ATOM_ENCODER_MODE_LVDS) { if (mode->clock > 165000) args.v3.sInput.ucDispPllConfig |= DISPPLL_CONFIG_DUAL_LINK; -- cgit v1.2.1 From 577d6a7c3a0e273e115c65a148b71be6c1950f69 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 24 Jan 2011 14:32:52 -0600 Subject: module: fix missing semicolons in MODULE macro usage You always needed them when you were a module, but the builtin versions of the macros used to be more lenient. Reported-by: Stephen Rothwell Signed-off-by: Rusty Russell --- drivers/net/arm/ks8695net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c index 62d6f88cbab5..aa07657744c3 100644 --- a/drivers/net/arm/ks8695net.c +++ b/drivers/net/arm/ks8695net.c @@ -1644,7 +1644,7 @@ ks8695_cleanup(void) module_init(ks8695_init); module_exit(ks8695_cleanup); -MODULE_AUTHOR("Simtec Electronics") +MODULE_AUTHOR("Simtec Electronics"); MODULE_DESCRIPTION("Micrel KS8695 (Centaur) Ethernet driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" MODULENAME); -- cgit v1.2.1 From 0909c1ec6f016b3f580fa2f4630659a5874a8ef8 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Thu, 6 Jan 2011 09:58:42 +0100 Subject: can: at91_can: clean up usage of AT91_MB_RX_FIRST and AT91_MB_RX_NUM This patch cleans up the usage of two macros which specify the mailbox usage. AT91_MB_RX_FIRST and AT91_MB_RX_NUM define the first and the number of RX mailboxes. The current driver uses these variables in an unclean way; assuming that AT91_MB_RX_FIRST is 0; This patch cleans up the usage of these macros, no longer assuming AT91_MB_RX_FIRST == 0. Signed-off-by: Marc Kleine-Budde Acked-by: Wolfgang Grandegger --- drivers/net/can/at91_can.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index 7ef83d06f7ed..892c3d8c64a2 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -2,7 +2,7 @@ * at91_can.c - CAN network driver for AT91 SoC CAN controller * * (C) 2007 by Hans J. Koch - * (C) 2008, 2009, 2010 by Marc Kleine-Budde + * (C) 2008, 2009, 2010, 2011 by Marc Kleine-Budde * * This software may be distributed under the terms of the GNU General * Public License ("GPL") version 2 as distributed in the 'COPYING' @@ -55,7 +55,8 @@ #define AT91_MB_RX_MASK(i) ((1 << (i)) - 1) #define AT91_MB_RX_SPLIT 8 #define AT91_MB_RX_LOW_LAST (AT91_MB_RX_SPLIT - 1) -#define AT91_MB_RX_LOW_MASK (AT91_MB_RX_MASK(AT91_MB_RX_SPLIT)) +#define AT91_MB_RX_LOW_MASK (AT91_MB_RX_MASK(AT91_MB_RX_SPLIT) & \ + ~AT91_MB_RX_MASK(AT91_MB_RX_FIRST)) #define AT91_MB_TX_NUM (1 << AT91_MB_TX_SHIFT) #define AT91_MB_TX_FIRST (AT91_MB_RX_LAST + 1) @@ -254,7 +255,8 @@ static void at91_setup_mailboxes(struct net_device *dev) set_mb_mode_prio(priv, i, AT91_MB_MODE_TX, 0); /* Reset tx and rx helper pointers */ - priv->tx_next = priv->tx_echo = priv->rx_next = 0; + priv->tx_next = priv->tx_echo = 0; + priv->rx_next = AT91_MB_RX_FIRST; } static int at91_set_bittiming(struct net_device *dev) @@ -590,10 +592,10 @@ static int at91_poll_rx(struct net_device *dev, int quota) "order of incoming frames cannot be guaranteed\n"); again: - for (mb = find_next_bit(addr, AT91_MB_RX_NUM, priv->rx_next); - mb < AT91_MB_RX_NUM && quota > 0; + for (mb = find_next_bit(addr, AT91_MB_RX_LAST + 1, priv->rx_next); + mb < AT91_MB_RX_LAST + 1 && quota > 0; reg_sr = at91_read(priv, AT91_SR), - mb = find_next_bit(addr, AT91_MB_RX_NUM, ++priv->rx_next)) { + mb = find_next_bit(addr, AT91_MB_RX_LAST + 1, ++priv->rx_next)) { at91_read_msg(dev, mb); /* reactivate mailboxes */ @@ -610,8 +612,8 @@ static int at91_poll_rx(struct net_device *dev, int quota) /* upper group completed, look again in lower */ if (priv->rx_next > AT91_MB_RX_LOW_LAST && - quota > 0 && mb >= AT91_MB_RX_NUM) { - priv->rx_next = 0; + quota > 0 && mb > AT91_MB_RX_LAST) { + priv->rx_next = AT91_MB_RX_FIRST; goto again; } -- cgit v1.2.1 From 9e0a2d1ca3de6e284e99ad5cae1ae33ecb74c479 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Sun, 9 Jan 2011 22:46:25 +0100 Subject: can: at91_can: don't use mailbox 0 Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in "AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox 0 may be send under certain conditions (even if disabled or in rx mode). The workaround in the errata suggests not to use the mailbox and load it with a unused identifier. This patch implements the first part of the workaround, it updates AT91_MB_RX_NUM and AT91_MB_RX_FIRST (and the inline documentation) so that mailbox 0 stays unused. Signed-off-by: Marc Kleine-Budde Acked-by: Wolfgang Grandegger Acked-by: Kurt Van Dijck --- drivers/net/can/at91_can.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index 892c3d8c64a2..16e45a51cbb3 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -40,16 +40,16 @@ #include -#define AT91_NAPI_WEIGHT 12 +#define AT91_NAPI_WEIGHT 11 /* * RX/TX Mailbox split * don't dare to touch */ -#define AT91_MB_RX_NUM 12 +#define AT91_MB_RX_NUM 11 #define AT91_MB_TX_SHIFT 2 -#define AT91_MB_RX_FIRST 0 +#define AT91_MB_RX_FIRST 1 #define AT91_MB_RX_LAST (AT91_MB_RX_FIRST + AT91_MB_RX_NUM - 1) #define AT91_MB_RX_MASK(i) ((1 << (i)) - 1) @@ -236,10 +236,14 @@ static void at91_setup_mailboxes(struct net_device *dev) unsigned int i; /* - * The first 12 mailboxes are used as a reception FIFO. The - * last mailbox is configured with overwrite option. The - * overwrite flag indicates a FIFO overflow. + * Due to a chip bug (errata 50.2.6.3 & 50.3.5.3) the first + * mailbox is disabled. The next 11 mailboxes are used as a + * reception FIFO. The last mailbox is configured with + * overwrite option. The overwrite flag indicates a FIFO + * overflow. */ + for (i = 0; i < AT91_MB_RX_FIRST; i++) + set_mb_mode(priv, i, AT91_MB_MODE_DISABLED); for (i = AT91_MB_RX_FIRST; i < AT91_MB_RX_LAST; i++) set_mb_mode(priv, i, AT91_MB_MODE_RX); set_mb_mode(priv, AT91_MB_RX_LAST, AT91_MB_MODE_RX_OVRWR); @@ -541,27 +545,31 @@ static void at91_read_msg(struct net_device *dev, unsigned int mb) * * Theory of Operation: * - * 12 of the 16 mailboxes on the chip are reserved for RX. we split - * them into 2 groups. The lower group holds 8 and upper 4 mailboxes. + * 11 of the 16 mailboxes on the chip are reserved for RX. we split + * them into 2 groups. The lower group holds 7 and upper 4 mailboxes. * * Like it or not, but the chip always saves a received CAN message * into the first free mailbox it finds (starting with the * lowest). This makes it very difficult to read the messages in the * right order from the chip. This is how we work around that problem: * - * The first message goes into mb nr. 0 and issues an interrupt. All + * The first message goes into mb nr. 1 and issues an interrupt. All * rx ints are disabled in the interrupt handler and a napi poll is * scheduled. We read the mailbox, but do _not_ reenable the mb (to * receive another message). * * lower mbxs upper - * ______^______ __^__ - * / \ / \ + * ____^______ __^__ + * / \ / \ * +-+-+-+-+-+-+-+-++-+-+-+-+ - * |x|x|x|x|x|x|x|x|| | | | | + * | |x|x|x|x|x|x|x|| | | | | * +-+-+-+-+-+-+-+-++-+-+-+-+ * 0 0 0 0 0 0 0 0 0 0 1 1 \ mail * 0 1 2 3 4 5 6 7 8 9 0 1 / box + * ^ + * | + * \ + * unused, due to chip bug * * The variable priv->rx_next points to the next mailbox to read a * message from. As long we're in the lower mailboxes we just read the -- cgit v1.2.1 From 3a5655a5b545e9647c3437473ee3d815fe1b9050 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 10 Jan 2011 20:44:22 +0100 Subject: can: at91_can: make can_id of mailbox 0 configurable Due to a chip bug (errata 50.2.6.3 & 50.3.5.3 in "AT91SAM9263 Preliminary 6249H-ATARM-27-Jul-09") the contents of mailbox 0 may be send under certain conditions (even if disabled or in rx mode). The workaround in the errata suggests not to use the mailbox and load it with an unused identifier. This patch implements the second part of the workaround. A sysfs entry "mb0_id" is introduced. While the interface is down it can be used to configure the can_id of mailbox 0. The default value id 0x7ff. In order to use an extended can_id add the CAN_EFF_FLAG (0x80000000U) to the can_id. Example: - standard id 0x7ff: echo 0x7ff > /sys/class/net/can0/mb0_id - extended id 0x1fffffff: echo 0x9fffffff > /sys/class/net/can0/mb0_id Signed-off-by: Marc Kleine-Budde Acked-by: Wolfgang Grandegger Acked-by: Kurt Van Dijck For the Documentation-part: Acked-by: Wolfram Sang --- drivers/net/can/at91_can.c | 90 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 83 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index 16e45a51cbb3..2532b9631538 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -169,6 +170,8 @@ struct at91_priv { struct clk *clk; struct at91_can_data *pdata; + + canid_t mb0_id; }; static struct can_bittiming_const at91_bittiming_const = { @@ -221,6 +224,18 @@ static inline void set_mb_mode(const struct at91_priv *priv, unsigned int mb, set_mb_mode_prio(priv, mb, mode, 0); } +static inline u32 at91_can_id_to_reg_mid(canid_t can_id) +{ + u32 reg_mid; + + if (can_id & CAN_EFF_FLAG) + reg_mid = (can_id & CAN_EFF_MASK) | AT91_MID_MIDE; + else + reg_mid = (can_id & CAN_SFF_MASK) << 18; + + return reg_mid; +} + /* * Swtich transceiver on or off */ @@ -234,6 +249,7 @@ static void at91_setup_mailboxes(struct net_device *dev) { struct at91_priv *priv = netdev_priv(dev); unsigned int i; + u32 reg_mid; /* * Due to a chip bug (errata 50.2.6.3 & 50.3.5.3) the first @@ -242,8 +258,13 @@ static void at91_setup_mailboxes(struct net_device *dev) * overwrite option. The overwrite flag indicates a FIFO * overflow. */ - for (i = 0; i < AT91_MB_RX_FIRST; i++) + reg_mid = at91_can_id_to_reg_mid(priv->mb0_id); + for (i = 0; i < AT91_MB_RX_FIRST; i++) { set_mb_mode(priv, i, AT91_MB_MODE_DISABLED); + at91_write(priv, AT91_MID(i), reg_mid); + at91_write(priv, AT91_MCR(i), 0x0); /* clear dlc */ + } + for (i = AT91_MB_RX_FIRST; i < AT91_MB_RX_LAST; i++) set_mb_mode(priv, i, AT91_MB_MODE_RX); set_mb_mode(priv, AT91_MB_RX_LAST, AT91_MB_MODE_RX_OVRWR); @@ -378,12 +399,7 @@ static netdev_tx_t at91_start_xmit(struct sk_buff *skb, struct net_device *dev) netdev_err(dev, "BUG! TX buffer full when queue awake!\n"); return NETDEV_TX_BUSY; } - - if (cf->can_id & CAN_EFF_FLAG) - reg_mid = (cf->can_id & CAN_EFF_MASK) | AT91_MID_MIDE; - else - reg_mid = (cf->can_id & CAN_SFF_MASK) << 18; - + reg_mid = at91_can_id_to_reg_mid(cf->can_id); reg_mcr = ((cf->can_id & CAN_RTR_FLAG) ? AT91_MCR_MRTR : 0) | (cf->can_dlc << 16) | AT91_MCR_MTCR; @@ -1047,6 +1063,64 @@ static const struct net_device_ops at91_netdev_ops = { .ndo_start_xmit = at91_start_xmit, }; +static ssize_t at91_sysfs_show_mb0_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct at91_priv *priv = netdev_priv(to_net_dev(dev)); + + if (priv->mb0_id & CAN_EFF_FLAG) + return snprintf(buf, PAGE_SIZE, "0x%08x\n", priv->mb0_id); + else + return snprintf(buf, PAGE_SIZE, "0x%03x\n", priv->mb0_id); +} + +static ssize_t at91_sysfs_set_mb0_id(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct net_device *ndev = to_net_dev(dev); + struct at91_priv *priv = netdev_priv(ndev); + unsigned long can_id; + ssize_t ret; + int err; + + rtnl_lock(); + + if (ndev->flags & IFF_UP) { + ret = -EBUSY; + goto out; + } + + err = strict_strtoul(buf, 0, &can_id); + if (err) { + ret = err; + goto out; + } + + if (can_id & CAN_EFF_FLAG) + can_id &= CAN_EFF_MASK | CAN_EFF_FLAG; + else + can_id &= CAN_SFF_MASK; + + priv->mb0_id = can_id; + ret = count; + + out: + rtnl_unlock(); + return ret; +} + +static DEVICE_ATTR(mb0_id, S_IWUGO | S_IRUGO, + at91_sysfs_show_mb0_id, at91_sysfs_set_mb0_id); + +static struct attribute *at91_sysfs_attrs[] = { + &dev_attr_mb0_id.attr, + NULL, +}; + +static struct attribute_group at91_sysfs_attr_group = { + .attrs = at91_sysfs_attrs, +}; + static int __devinit at91_can_probe(struct platform_device *pdev) { struct net_device *dev; @@ -1092,6 +1166,7 @@ static int __devinit at91_can_probe(struct platform_device *pdev) dev->netdev_ops = &at91_netdev_ops; dev->irq = irq; dev->flags |= IFF_ECHO; + dev->sysfs_groups[0] = &at91_sysfs_attr_group; priv = netdev_priv(dev); priv->can.clock.freq = clk_get_rate(clk); @@ -1103,6 +1178,7 @@ static int __devinit at91_can_probe(struct platform_device *pdev) priv->dev = dev; priv->clk = clk; priv->pdata = pdev->dev.platform_data; + priv->mb0_id = 0x7ff; netif_napi_add(dev, &priv->napi, at91_poll, AT91_NAPI_WEIGHT); -- cgit v1.2.1 From 4dc2757a2e9a9d1f2faee4fc6119276fc0061c16 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Tue, 4 Jan 2011 11:32:13 +0530 Subject: [SCSI] mpt2sas: Fix device removal handshake for zoned devices When zoning end devices, the driver is not sending device removal handshake alogrithm to firmware. This results in controller firmware not sending sas topology add events the next time the device is added. The fix is the driver should be doing the device removal handshake even though the PHYSTATUS_VACANT bit is set in the PhyStatus of the event data. The current design is avoiding the handshake when the VACANT bit is set in the phy status. Signed-off-by: Kashyap Desai Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index eda347c57979..95d82743d7b1 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2981,9 +2981,6 @@ _scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc, u16 handle; for (i = 0 ; i < event_data->NumEntries; i++) { - if (event_data->PHY[i].PhyStatus & - MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) - continue; handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle); if (!handle) continue; -- cgit v1.2.1 From efe82a16bc0f9f9e1fc8fa706eb0309fcd57770a Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Tue, 4 Jan 2011 11:34:17 +0530 Subject: [SCSI] mpt2sas: fix internal device reset for older firmware prior to MPI Rev K The "internal device reset complete" event is not supported for older firmware prior to MPI Rev K We added a check in the driver so the "internal device reset" event is ignored for older firmware. When ignored, the tm_busy flag doesn't get set nor cleared. Without this fix, IO queues would be froozen indefinetly after the "internal device reset" event, as the "complete" event never sent to clear the flag. Signed-off-by: Kashyap Desai Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 95d82743d7b1..a16f2a05736f 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -5002,6 +5002,12 @@ _scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc, event_data); #endif + /* In MPI Revision K (0xC), the internal device reset complete was + * implemented, so avoid setting tm_busy flag for older firmware. + */ + if ((ioc->facts.HeaderVersion >> 8) < 0xC) + return; + if (event_data->ReasonCode != MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET && event_data->ReasonCode != -- cgit v1.2.1 From 11e1b961ab067ee3acaf723531da4d3f23e1d6f7 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Tue, 4 Jan 2011 11:34:57 +0530 Subject: [SCSI] mpt2sas: Correct resizing calculation for max_queue_depth The ioc->hba_queue_depth is not properly resized when the controller firmware reports that it supports more outstanding IO than what can be fit inside the reply descriptor pool depth. This is reproduced by setting the controller global credits larger than 30,000. The bug results in an incorrect sizing of the queues. The fix is to resize the queue_size by dividing queue_diff by two. Signed-off-by: Kashyap Desai Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index b2a817055b8b..a11ac6701043 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -2176,9 +2176,9 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) /* adjust hba_queue_depth, reply_free_queue_depth, * and queue_size */ - ioc->hba_queue_depth -= queue_diff; - ioc->reply_free_queue_depth -= queue_diff; - queue_size -= queue_diff; + ioc->hba_queue_depth -= (queue_diff / 2); + ioc->reply_free_queue_depth -= (queue_diff / 2); + queue_size = facts->MaxReplyDescriptorPostQueueDepth; } ioc->reply_post_queue_depth = queue_size; -- cgit v1.2.1 From 8cb2815574278a1bf966f041cbfe5b7c91472dcd Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 24 Jan 2011 15:22:13 +0100 Subject: ARM: 6632/3: mmci: stop using the blockend interrupts Implement a suggestion from Russell to drop the use of blockend interrupts altogether and instead rely on the data counter. Tested with error-free cards on U300, U8500 and RealView PB1176. Signed-off-by: Ulf Hansson Signed-off-by: Linus Walleij Signed-off-by: Russell King --- drivers/mmc/host/mmci.c | 98 ++++++++++--------------------------------------- drivers/mmc/host/mmci.h | 5 +-- 2 files changed, 21 insertions(+), 82 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 563022825667..2de12fe155da 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -46,10 +46,6 @@ static unsigned int fmax = 515633; * is asserted (likewise for RX) * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY * is asserted (likewise for RX) - * @broken_blockend: the MCI_DATABLOCKEND is broken on the hardware - * and will not work at all. - * @broken_blockend_dma: the MCI_DATABLOCKEND is broken on the hardware when - * using DMA. * @sdio: variant supports SDIO * @st_clkdiv: true if using a ST-specific clock divider algorithm */ @@ -59,8 +55,6 @@ struct variant_data { unsigned int datalength_bits; unsigned int fifosize; unsigned int fifohalfsize; - bool broken_blockend; - bool broken_blockend_dma; bool sdio; bool st_clkdiv; }; @@ -76,7 +70,6 @@ static struct variant_data variant_u300 = { .fifohalfsize = 8 * 4, .clkreg_enable = 1 << 13, /* HWFCEN */ .datalength_bits = 16, - .broken_blockend_dma = true, .sdio = true, }; @@ -86,7 +79,6 @@ static struct variant_data variant_ux500 = { .clkreg = MCI_CLK_ENABLE, .clkreg_enable = 1 << 14, /* HWFCEN */ .datalength_bits = 24, - .broken_blockend = true, .sdio = true, .st_clkdiv = true, }; @@ -210,8 +202,6 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) host->data = data; host->size = data->blksz * data->blocks; host->data_xfered = 0; - host->blockend = false; - host->dataend = false; mmci_init_sg(host, data); @@ -288,21 +278,26 @@ static void mmci_data_irq(struct mmci_host *host, struct mmc_data *data, unsigned int status) { - struct variant_data *variant = host->variant; - /* First check for errors */ if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) { + u32 remain, success; + + /* Calculate how far we are into the transfer */ + remain = readl(host->base + MMCIDATACNT) << 2; + success = data->blksz * data->blocks - remain; + dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status); - if (status & MCI_DATACRCFAIL) + if (status & MCI_DATACRCFAIL) { + /* Last block was not successful */ + host->data_xfered = ((success / data->blksz) - 1 * data->blksz); data->error = -EILSEQ; - else if (status & MCI_DATATIMEOUT) + } else if (status & MCI_DATATIMEOUT) { + host->data_xfered = success; data->error = -ETIMEDOUT; - else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) + } else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) { + host->data_xfered = success; data->error = -EIO; - - /* Force-complete the transaction */ - host->blockend = true; - host->dataend = true; + } /* * We hit an error condition. Ensure that any data @@ -321,61 +316,14 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, } } - /* - * On ARM variants in PIO mode, MCI_DATABLOCKEND - * is always sent first, and we increase the - * transfered number of bytes for that IRQ. Then - * MCI_DATAEND follows and we conclude the transaction. - * - * On the Ux500 single-IRQ variant MCI_DATABLOCKEND - * doesn't seem to immediately clear from the status, - * so we can't use it keep count when only one irq is - * used because the irq will hit for other reasons, and - * then the flag is still up. So we use the MCI_DATAEND - * IRQ at the end of the entire transfer because - * MCI_DATABLOCKEND is broken. - * - * In the U300, the IRQs can arrive out-of-order, - * e.g. MCI_DATABLOCKEND sometimes arrives after MCI_DATAEND, - * so for this case we use the flags "blockend" and - * "dataend" to make sure both IRQs have arrived before - * concluding the transaction. (This does not apply - * to the Ux500 which doesn't fire MCI_DATABLOCKEND - * at all.) In DMA mode it suffers from the same problem - * as the Ux500. - */ - if (status & MCI_DATABLOCKEND) { - /* - * Just being a little over-cautious, we do not - * use this progressive update if the hardware blockend - * flag is unreliable: since it can stay high between - * IRQs it will corrupt the transfer counter. - */ - if (!variant->broken_blockend) - host->data_xfered += data->blksz; - host->blockend = true; - } - - if (status & MCI_DATAEND) - host->dataend = true; + if (status & MCI_DATABLOCKEND) + dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n"); - /* - * On variants with broken blockend we shall only wait for dataend, - * on others we must sync with the blockend signal since they can - * appear out-of-order. - */ - if (host->dataend && (host->blockend || variant->broken_blockend)) { + if (status & MCI_DATAEND) { mmci_stop_data(host); - /* Reset these flags */ - host->blockend = false; - host->dataend = false; - - /* - * Variants with broken blockend flags need to handle the - * end of the entire transfer here. - */ - if (variant->broken_blockend && !data->error) + if (!data->error) + /* The error clause is handled above, success! */ host->data_xfered += data->blksz * data->blocks; if (!data->stop) { @@ -770,7 +718,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) struct variant_data *variant = id->data; struct mmci_host *host; struct mmc_host *mmc; - unsigned int mask; int ret; /* must have platform data */ @@ -951,12 +898,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) goto irq0_free; } - mask = MCI_IRQENABLE; - /* Don't use the datablockend flag if it's broken */ - if (variant->broken_blockend) - mask &= ~MCI_DATABLOCKEND; - - writel(mask, host->base + MMCIMASK0); + writel(MCI_IRQENABLE, host->base + MMCIMASK0); amba_set_drvdata(dev, mmc); diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index df06f01aac89..c1df7b82d36c 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -137,7 +137,7 @@ #define MCI_IRQENABLE \ (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \ MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \ - MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATABLOCKENDMASK) + MCI_CMDRESPENDMASK|MCI_CMDSENTMASK) /* These interrupts are directed to IRQ1 when two IRQ lines are available */ #define MCI_IRQ1MASK \ @@ -177,9 +177,6 @@ struct mmci_host { struct timer_list timer; unsigned int oldstat; - bool blockend; - bool dataend; - /* pio stuff */ struct sg_mapping_iter sg_miter; unsigned int size; -- cgit v1.2.1 From ec07a053597bdab51cbd23619f9f9f392712508a Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 5 Jan 2011 17:54:32 +0530 Subject: [SCSI] mpt2sas: Fix the race between broadcast asyn event and scsi command completion False timeout after hard resets, there were two issues which leads to timeout. (1) Panic because of invalid memory access in the broadcast asyn event processing routine due to a race between accessing the scsi command pointer from broadcast asyn event processing thread and completing the same scsi command from the interrupt context. (2) Broadcast asyn event notifcations are not handled due to events ignored while the broadcast asyn event is activity being processed from the event process kernel thread. In addition, changed the ABRT_TASK_SET to ABORT_TASK in the broadcast async event processing routine. This is less disruptive to other request that generate Broadcast Asyn Primitives besides target reset. e.g clear reservations, microcode download,and mode select. Signed-off-by: Kashyap Desai Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 54 ++++++++++++++++++++++++++++++------ 1 file changed, 45 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index a16f2a05736f..db287d79bdcf 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -819,7 +819,7 @@ _scsih_is_end_device(u32 device_info) } /** - * mptscsih_get_scsi_lookup - returns scmd entry + * _scsih_scsi_lookup_get - returns scmd entry * @ioc: per adapter object * @smid: system request message index * @@ -831,6 +831,28 @@ _scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid) return ioc->scsi_lookup[smid - 1].scmd; } +/** + * _scsih_scsi_lookup_get_clear - returns scmd entry + * @ioc: per adapter object + * @smid: system request message index + * + * Returns the smid stored scmd pointer. + * Then will derefrence the stored scmd pointer. + */ +static inline struct scsi_cmnd * +_scsih_scsi_lookup_get_clear(struct MPT2SAS_ADAPTER *ioc, u16 smid) +{ + unsigned long flags; + struct scsi_cmnd *scmd; + + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + scmd = ioc->scsi_lookup[smid - 1].scmd; + ioc->scsi_lookup[smid - 1].scmd = NULL; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); + + return scmd; +} + /** * _scsih_scsi_lookup_find_by_scmd - scmd lookup * @ioc: per adapter object @@ -3207,7 +3229,7 @@ _scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc) u16 count = 0; for (smid = 1; smid <= ioc->scsiio_depth; smid++) { - scmd = _scsih_scsi_lookup_get(ioc, smid); + scmd = _scsih_scsi_lookup_get_clear(ioc, smid); if (!scmd) continue; count++; @@ -3801,7 +3823,7 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) u32 response_code = 0; mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); - scmd = _scsih_scsi_lookup_get(ioc, smid); + scmd = _scsih_scsi_lookup_get_clear(ioc, smid); if (scmd == NULL) return 1; @@ -5102,6 +5124,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { struct scsi_cmnd *scmd; + struct scsi_device *sdev; u16 smid, handle; u32 lun; struct MPT2SAS_DEVICE *sas_device_priv_data; @@ -5112,12 +5135,17 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, Mpi2EventDataSasBroadcastPrimitive_t *event_data = fw_event->event_data; #endif u16 ioc_status; + unsigned long flags; + int r; + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "broadcast primative: " "phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum, event_data->PortWidth)); dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name, __func__)); + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); + ioc->broadcast_aen_busy = 0; termination_count = 0; query_count = 0; mpi_reply = ioc->tm_cmds.reply; @@ -5125,7 +5153,8 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, scmd = _scsih_scsi_lookup_get(ioc, smid); if (!scmd) continue; - sas_device_priv_data = scmd->device->hostdata; + sdev = scmd->device; + sas_device_priv_data = sdev->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) continue; /* skip hidden raid components */ @@ -5141,6 +5170,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, lun = sas_device_priv_data->lun; query_count++; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun, MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30, NULL); ioc->tm_cmds.status = MPT2_CMD_NOT_USED; @@ -5150,14 +5180,20 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, (mpi_reply->ResponseCode == MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED || mpi_reply->ResponseCode == - MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC)) + MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC)) { + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); continue; - - mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun, - MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30, NULL); + } + r = mpt2sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id, + sdev->lun, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30, + scmd); + if (r == FAILED) + sdev_printk(KERN_WARNING, sdev, "task abort: FAILED " + "scmd(%p)\n", scmd); termination_count += le32_to_cpu(mpi_reply->TerminationCount); + spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); } - ioc->broadcast_aen_busy = 0; + spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s - exit, query_count = %d termination_count = %d\n", -- cgit v1.2.1 From 4224489f45b503f0a1f1cf310f76dc108f45689a Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Tue, 4 Jan 2011 11:38:39 +0530 Subject: [SCSI] mpt2sas: Kernel Panic during Large Topology discovery There was a configuration page timing out during the initial port enable at driver load time. The port enable would fail, and this would result in the driver unloading itself, meanwhile the driver was accessing freed memory in another context resulting in the panic. The fix is to prevent access to freed memory once the driver had issued the diag reset which woke up the sleeping port enable process. The routine _base_reset_handler was reorganized so the last sleeping process woken up was the port_enable. Signed-off-by: Kashyap Desai Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index a11ac6701043..9ead0399808a 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -3941,6 +3941,8 @@ mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc) static void _base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) { + mpt2sas_scsih_reset_handler(ioc, reset_phase); + mpt2sas_ctl_reset_handler(ioc, reset_phase); switch (reset_phase) { case MPT2_IOC_PRE_RESET: dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " @@ -3971,8 +3973,6 @@ _base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) "MPT2_IOC_DONE_RESET\n", ioc->name, __func__)); break; } - mpt2sas_scsih_reset_handler(ioc, reset_phase); - mpt2sas_ctl_reset_handler(ioc, reset_phase); } /** @@ -4026,6 +4026,7 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, { int r; unsigned long flags; + u8 pe_complete = ioc->wait_for_port_enable_to_complete; dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name, __func__)); @@ -4068,6 +4069,14 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, if (r) goto out; _base_reset_handler(ioc, MPT2_IOC_AFTER_RESET); + + /* If this hard reset is called while port enable is active, then + * there is no reason to call make_ioc_operational + */ + if (pe_complete) { + r = -EFAULT; + goto out; + } r = _base_make_ioc_operational(ioc, sleep_flag); if (!r) _base_reset_handler(ioc, MPT2_IOC_DONE_RESET); -- cgit v1.2.1 From 3a9c913a3e57b170887d39456e04c18f2305ec67 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Tue, 4 Jan 2011 11:40:23 +0530 Subject: [SCSI] mpt2sas: fix Integrated Raid unsynced on shutdown problem Issue: IR shutdown(sending) and IR shutdown(complete) messages not listed in /var/log/messages when driver is removed. The driver needs to issue a MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED request when the driver is unloaded so the IR metadata journal is updated. If this request is not sent, then the volume would need a "check consistency" issued on the next bootup if the volume was roamed from one initiator to another. The current driver supports this feature only when the system is rebooted, however this also need to be supported if the driver is unloaded Fix: To fix this issue, the driver is going to need to call the _scsih_ir_shutdown prior to reporting the volumes missing from the OS, hence the device handles are still present. Signed-off-by: Kashyap Desai Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index db287d79bdcf..5ded3db6e316 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -6665,6 +6665,7 @@ _scsih_remove(struct pci_dev *pdev) destroy_workqueue(wq); /* release all the volumes */ + _scsih_ir_shutdown(ioc); list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list, list) { if (raid_device->starget) { -- cgit v1.2.1 From 97b991277a9966333b3bcea0d972822278780694 Mon Sep 17 00:00:00 2001 From: NickCheng Date: Thu, 6 Jan 2011 17:32:41 +0800 Subject: [SCSI] arcmsr: Fix the issue of system hangup after commands timeout on ARC-1200 [jejb: fix up patch problems and checkpatch.pl issues] Signed-off-by: Nick Cheng Signed-off-by: James Bottomley --- drivers/scsi/arcmsr/arcmsr.h | 11 ++-- drivers/scsi/arcmsr/arcmsr_attr.c | 2 +- drivers/scsi/arcmsr/arcmsr_hba.c | 114 ++++++++++++++------------------------ 3 files changed, 49 insertions(+), 78 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h index 475c31ae985c..77b26f5b9c33 100644 --- a/drivers/scsi/arcmsr/arcmsr.h +++ b/drivers/scsi/arcmsr/arcmsr.h @@ -2,7 +2,7 @@ ******************************************************************************* ** O.S : Linux ** FILE NAME : arcmsr.h -** BY : Erich Chen +** BY : Nick Cheng ** Description: SCSI RAID Device Driver for ** ARECA RAID Host adapter ******************************************************************************* @@ -46,8 +46,12 @@ struct device_attribute; /*The limit of outstanding scsi command that firmware can handle*/ #define ARCMSR_MAX_OUTSTANDING_CMD 256 -#define ARCMSR_MAX_FREECCB_NUM 320 -#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2010/02/02" +#ifdef CONFIG_XEN + #define ARCMSR_MAX_FREECCB_NUM 160 +#else + #define ARCMSR_MAX_FREECCB_NUM 320 +#endif +#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2010/08/05" #define ARCMSR_SCSI_INITIATOR_ID 255 #define ARCMSR_MAX_XFER_SECTORS 512 #define ARCMSR_MAX_XFER_SECTORS_B 4096 @@ -60,7 +64,6 @@ struct device_attribute; #define ARCMSR_MAX_HBB_POSTQUEUE 264 #define ARCMSR_MAX_XFER_LEN 0x26000 /* 152K */ #define ARCMSR_CDB_SG_PAGE_LENGTH 256 -#define SCSI_CMD_ARECA_SPECIFIC 0xE1 #ifndef PCI_DEVICE_ID_ARECA_1880 #define PCI_DEVICE_ID_ARECA_1880 0x1880 #endif diff --git a/drivers/scsi/arcmsr/arcmsr_attr.c b/drivers/scsi/arcmsr/arcmsr_attr.c index a4e04c50c436..acdae33de521 100644 --- a/drivers/scsi/arcmsr/arcmsr_attr.c +++ b/drivers/scsi/arcmsr/arcmsr_attr.c @@ -2,7 +2,7 @@ ******************************************************************************* ** O.S : Linux ** FILE NAME : arcmsr_attr.c -** BY : Erich Chen +** BY : Nick Cheng ** Description: attributes exported to sysfs and device host ******************************************************************************* ** Copyright (C) 2002 - 2005, Areca Technology Corporation All rights reserved diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c index 1cadcd6b7da6..984bd527c6c9 100644 --- a/drivers/scsi/arcmsr/arcmsr_hba.c +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -2,7 +2,7 @@ ******************************************************************************* ** O.S : Linux ** FILE NAME : arcmsr_hba.c -** BY : Erich Chen +** BY : Nick Cheng ** Description: SCSI RAID Device Driver for ** ARECA RAID Host adapter ******************************************************************************* @@ -76,7 +76,7 @@ MODULE_DESCRIPTION("ARECA (ARC11xx/12xx/16xx/1880) SATA/SAS RAID Host Bus Adapte MODULE_LICENSE("Dual BSD/GPL"); MODULE_VERSION(ARCMSR_DRIVER_VERSION); static int sleeptime = 10; -static int retrycount = 30; +static int retrycount = 12; wait_queue_head_t wait_q; static int arcmsr_iop_message_xfer(struct AdapterControlBlock *acb, struct scsi_cmnd *cmd); @@ -187,7 +187,6 @@ int arcmsr_sleep_for_bus_reset(struct scsi_cmnd *cmd) if (isleep > 0) { msleep(isleep*1000); } - printk(KERN_NOTICE "wake-up\n"); return 0; } @@ -921,7 +920,6 @@ static void arcmsr_report_ccb_state(struct AdapterControlBlock *acb, } static void arcmsr_drain_donequeue(struct AdapterControlBlock *acb, struct CommandControlBlock *pCCB, bool error) - { int id, lun; if ((pCCB->acb != acb) || (pCCB->startdone != ARCMSR_CCB_START)) { @@ -948,7 +946,7 @@ static void arcmsr_drain_donequeue(struct AdapterControlBlock *acb, struct Comma , pCCB->startdone , atomic_read(&acb->ccboutstandingcount)); return; - } + } arcmsr_report_ccb_state(acb, pCCB, error); } @@ -981,7 +979,7 @@ static void arcmsr_done4abort_postqueue(struct AdapterControlBlock *acb) case ACB_ADAPTER_TYPE_B: { struct MessageUnit_B *reg = acb->pmuB; /*clear all outbound posted Q*/ - writel(ARCMSR_DOORBELL_INT_CLEAR_PATTERN, ®->iop2drv_doorbell); /* clear doorbell interrupt */ + writel(ARCMSR_DOORBELL_INT_CLEAR_PATTERN, reg->iop2drv_doorbell); /* clear doorbell interrupt */ for (i = 0; i < ARCMSR_MAX_HBB_POSTQUEUE; i++) { if ((flag_ccb = readl(®->done_qbuffer[i])) != 0) { writel(0, ®->done_qbuffer[i]); @@ -1511,7 +1509,6 @@ static void arcmsr_hba_postqueue_isr(struct AdapterControlBlock *acb) arcmsr_drain_donequeue(acb, pCCB, error); } } - static void arcmsr_hbb_postqueue_isr(struct AdapterControlBlock *acb) { uint32_t index; @@ -2106,10 +2103,6 @@ static int arcmsr_queue_command_lck(struct scsi_cmnd *cmd, if (atomic_read(&acb->ccboutstandingcount) >= ARCMSR_MAX_OUTSTANDING_CMD) return SCSI_MLQUEUE_HOST_BUSY; - if ((scsicmd == SCSI_CMD_ARECA_SPECIFIC)) { - printk(KERN_NOTICE "Receiveing SCSI_CMD_ARECA_SPECIFIC command..\n"); - return 0; - } ccb = arcmsr_get_freeccb(acb); if (!ccb) return SCSI_MLQUEUE_HOST_BUSY; @@ -2393,6 +2386,7 @@ static int arcmsr_polling_hbb_ccbdone(struct AdapterControlBlock *acb, int index, rtn; bool error; polling_hbb_ccb_retry: + poll_count++; /* clear doorbell interrupt */ writel(ARCMSR_DOORBELL_INT_CLEAR_PATTERN, reg->iop2drv_doorbell); @@ -2663,6 +2657,7 @@ static void arcmsr_request_hba_device_map(struct AdapterControlBlock *acb) { struct MessageUnit_A __iomem *reg = acb->pmuA; if (unlikely(atomic_read(&acb->rq_map_token) == 0) || ((acb->acb_flags & ACB_F_BUS_RESET) != 0 ) || ((acb->acb_flags & ACB_F_ABORT) != 0 )){ + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); return; } else { acb->fw_flag = FW_NORMAL; @@ -2670,8 +2665,10 @@ static void arcmsr_request_hba_device_map(struct AdapterControlBlock *acb) atomic_set(&acb->rq_map_token, 16); } atomic_set(&acb->ante_token_value, atomic_read(&acb->rq_map_token)); - if (atomic_dec_and_test(&acb->rq_map_token)) + if (atomic_dec_and_test(&acb->rq_map_token)) { + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); return; + } writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, ®->inbound_msgaddr0); mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); } @@ -2682,15 +2679,18 @@ static void arcmsr_request_hbb_device_map(struct AdapterControlBlock *acb) { struct MessageUnit_B __iomem *reg = acb->pmuB; if (unlikely(atomic_read(&acb->rq_map_token) == 0) || ((acb->acb_flags & ACB_F_BUS_RESET) != 0 ) || ((acb->acb_flags & ACB_F_ABORT) != 0 )){ + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); return; } else { acb->fw_flag = FW_NORMAL; if (atomic_read(&acb->ante_token_value) == atomic_read(&acb->rq_map_token)) { - atomic_set(&acb->rq_map_token,16); + atomic_set(&acb->rq_map_token, 16); } atomic_set(&acb->ante_token_value, atomic_read(&acb->rq_map_token)); - if(atomic_dec_and_test(&acb->rq_map_token)) + if (atomic_dec_and_test(&acb->rq_map_token)) { + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); return; + } writel(ARCMSR_MESSAGE_GET_CONFIG, reg->drv2iop_doorbell); mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); } @@ -2701,6 +2701,7 @@ static void arcmsr_request_hbc_device_map(struct AdapterControlBlock *acb) { struct MessageUnit_C __iomem *reg = acb->pmuC; if (unlikely(atomic_read(&acb->rq_map_token) == 0) || ((acb->acb_flags & ACB_F_BUS_RESET) != 0) || ((acb->acb_flags & ACB_F_ABORT) != 0)) { + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); return; } else { acb->fw_flag = FW_NORMAL; @@ -2708,8 +2709,10 @@ static void arcmsr_request_hbc_device_map(struct AdapterControlBlock *acb) atomic_set(&acb->rq_map_token, 16); } atomic_set(&acb->ante_token_value, atomic_read(&acb->rq_map_token)); - if (atomic_dec_and_test(&acb->rq_map_token)) + if (atomic_dec_and_test(&acb->rq_map_token)) { + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); return; + } writel(ARCMSR_INBOUND_MESG0_GET_CONFIG, ®->inbound_msgaddr0); writel(ARCMSR_HBCMU_DRV2IOP_MESSAGE_CMD_DONE, ®->inbound_doorbell); mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); @@ -2897,6 +2900,8 @@ static uint8_t arcmsr_iop_reset(struct AdapterControlBlock *acb) uint32_t intmask_org; uint8_t rtnval = 0x00; int i = 0; + unsigned long flags; + if (atomic_read(&acb->ccboutstandingcount) != 0) { /* disable all outbound interrupt */ intmask_org = arcmsr_disable_outbound_ints(acb); @@ -2907,7 +2912,12 @@ static uint8_t arcmsr_iop_reset(struct AdapterControlBlock *acb) for (i = 0; i < ARCMSR_MAX_FREECCB_NUM; i++) { ccb = acb->pccb_pool[i]; if (ccb->startdone == ARCMSR_CCB_START) { - arcmsr_ccb_complete(ccb); + scsi_dma_unmap(ccb->pcmd); + ccb->startdone = ARCMSR_CCB_DONE; + ccb->ccb_flags = 0; + spin_lock_irqsave(&acb->ccblist_lock, flags); + list_add_tail(&ccb->list, &acb->ccb_free_list); + spin_unlock_irqrestore(&acb->ccblist_lock, flags); } } atomic_set(&acb->ccboutstandingcount, 0); @@ -2920,8 +2930,7 @@ static uint8_t arcmsr_iop_reset(struct AdapterControlBlock *acb) static int arcmsr_bus_reset(struct scsi_cmnd *cmd) { - struct AdapterControlBlock *acb = - (struct AdapterControlBlock *)cmd->device->host->hostdata; + struct AdapterControlBlock *acb; uint32_t intmask_org, outbound_doorbell; int retry_count = 0; int rtn = FAILED; @@ -2971,31 +2980,16 @@ sleep_again: atomic_set(&acb->rq_map_token, 16); atomic_set(&acb->ante_token_value, 16); acb->fw_flag = FW_NORMAL; - init_timer(&acb->eternal_timer); - acb->eternal_timer.expires = jiffies + msecs_to_jiffies(6*HZ); - acb->eternal_timer.data = (unsigned long) acb; - acb->eternal_timer.function = &arcmsr_request_device_map; - add_timer(&acb->eternal_timer); + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); acb->acb_flags &= ~ACB_F_BUS_RESET; rtn = SUCCESS; printk(KERN_ERR "arcmsr: scsi bus reset eh returns with success\n"); } else { acb->acb_flags &= ~ACB_F_BUS_RESET; - if (atomic_read(&acb->rq_map_token) == 0) { - atomic_set(&acb->rq_map_token, 16); - atomic_set(&acb->ante_token_value, 16); - acb->fw_flag = FW_NORMAL; - init_timer(&acb->eternal_timer); - acb->eternal_timer.expires = jiffies + msecs_to_jiffies(6*HZ); - acb->eternal_timer.data = (unsigned long) acb; - acb->eternal_timer.function = &arcmsr_request_device_map; - add_timer(&acb->eternal_timer); - } else { - atomic_set(&acb->rq_map_token, 16); - atomic_set(&acb->ante_token_value, 16); - acb->fw_flag = FW_NORMAL; - mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6*HZ)); - } + atomic_set(&acb->rq_map_token, 16); + atomic_set(&acb->ante_token_value, 16); + acb->fw_flag = FW_NORMAL; + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6*HZ)); rtn = SUCCESS; } break; @@ -3007,21 +3001,10 @@ sleep_again: rtn = FAILED; } else { acb->acb_flags &= ~ACB_F_BUS_RESET; - if (atomic_read(&acb->rq_map_token) == 0) { - atomic_set(&acb->rq_map_token, 16); - atomic_set(&acb->ante_token_value, 16); - acb->fw_flag = FW_NORMAL; - init_timer(&acb->eternal_timer); - acb->eternal_timer.expires = jiffies + msecs_to_jiffies(6*HZ); - acb->eternal_timer.data = (unsigned long) acb; - acb->eternal_timer.function = &arcmsr_request_device_map; - add_timer(&acb->eternal_timer); - } else { - atomic_set(&acb->rq_map_token, 16); - atomic_set(&acb->ante_token_value, 16); - acb->fw_flag = FW_NORMAL; - mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6*HZ)); - } + atomic_set(&acb->rq_map_token, 16); + atomic_set(&acb->ante_token_value, 16); + acb->fw_flag = FW_NORMAL; + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); rtn = SUCCESS; } break; @@ -3067,31 +3050,16 @@ sleep: atomic_set(&acb->rq_map_token, 16); atomic_set(&acb->ante_token_value, 16); acb->fw_flag = FW_NORMAL; - init_timer(&acb->eternal_timer); - acb->eternal_timer.expires = jiffies + msecs_to_jiffies(6 * HZ); - acb->eternal_timer.data = (unsigned long) acb; - acb->eternal_timer.function = &arcmsr_request_device_map; - add_timer(&acb->eternal_timer); + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6 * HZ)); acb->acb_flags &= ~ACB_F_BUS_RESET; rtn = SUCCESS; printk(KERN_ERR "arcmsr: scsi bus reset eh returns with success\n"); } else { acb->acb_flags &= ~ACB_F_BUS_RESET; - if (atomic_read(&acb->rq_map_token) == 0) { - atomic_set(&acb->rq_map_token, 16); - atomic_set(&acb->ante_token_value, 16); - acb->fw_flag = FW_NORMAL; - init_timer(&acb->eternal_timer); - acb->eternal_timer.expires = jiffies + msecs_to_jiffies(6*HZ); - acb->eternal_timer.data = (unsigned long) acb; - acb->eternal_timer.function = &arcmsr_request_device_map; - add_timer(&acb->eternal_timer); - } else { - atomic_set(&acb->rq_map_token, 16); - atomic_set(&acb->ante_token_value, 16); - acb->fw_flag = FW_NORMAL; - mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6*HZ)); - } + atomic_set(&acb->rq_map_token, 16); + atomic_set(&acb->ante_token_value, 16); + acb->fw_flag = FW_NORMAL; + mod_timer(&acb->eternal_timer, jiffies + msecs_to_jiffies(6*HZ)); rtn = SUCCESS; } break; -- cgit v1.2.1 From 8c6a98b22b750c9eb52653ba643faa17db8d3881 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Mon, 24 Jan 2011 09:31:38 -0800 Subject: Input: sysrq - ensure sysrq_enabled and __sysrq_enabled are consistent Currently sysrq_enabled and __sysrq_enabled are initialised separately and inconsistently, leading to sysrq being actually enabled by reported as not enabled in sysfs. The first change to the sysfs configurable synchronises these two: static int __read_mostly sysrq_enabled = 1; static int __sysrq_enabled; Add a common define to carry the default for these preventing them becoming out of sync again. Default this to 1 to mirror previous behaviour. Signed-off-by: Andy Whitcroft Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov --- drivers/char/sysrq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c index c556ed9db13d..8e0dd254eb11 100644 --- a/drivers/char/sysrq.c +++ b/drivers/char/sysrq.c @@ -46,7 +46,7 @@ #include /* Whether we react on sysrq keys or just ignore them */ -static int __read_mostly sysrq_enabled = 1; +static int __read_mostly sysrq_enabled = SYSRQ_DEFAULT_ENABLE; static bool __read_mostly sysrq_always_enabled; static bool sysrq_on(void) -- cgit v1.2.1 From d38acb49b7368ac4e8ec0db0055155be0805db5d Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Mon, 24 Jan 2011 09:32:50 -0800 Subject: Input: wacom - add 2 Bamboo Pen and touch models Reported-by: David Foley Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 518782999fea..f44c822caac8 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1426,6 +1426,10 @@ static struct wacom_features wacom_features_0xD3 = { "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; static const struct wacom_features wacom_features_0xD4 = { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 255, 63, BAMBOO_PT }; +static struct wacom_features wacom_features_0xD6 = + { "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; +static struct wacom_features wacom_features_0xD7 = + { "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT }; static struct wacom_features wacom_features_0xD8 = { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT }; static struct wacom_features wacom_features_0xDA = @@ -1507,6 +1511,8 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xD2) }, { USB_DEVICE_WACOM(0xD3) }, { USB_DEVICE_WACOM(0xD4) }, + { USB_DEVICE_WACOM(0xD6) }, + { USB_DEVICE_WACOM(0xD7) }, { USB_DEVICE_WACOM(0xD8) }, { USB_DEVICE_WACOM(0xDA) }, { USB_DEVICE_WACOM(0xDB) }, -- cgit v1.2.1 From 9ee91f7fb550a4c82f82d9818e42493484c754af Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 20 Jan 2011 17:26:44 -0600 Subject: [SCSI] libsas: fix runaway error handler problem libsas makes use of scsi_schedule_eh() but forgets to clear the host_eh_scheduled flag in its error handling routine. Because of this, the error handler thread never gets to sleep; it's constantly awake and trying to run the error routine leading to console spew and inability to run anything else (at least on a UP system). The fix is to clear the flag as we splice the work queue. Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_scsi_host.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 5815cbeb27a6..9a7aaf5f1311 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -646,6 +646,7 @@ void sas_scsi_recover_host(struct Scsi_Host *shost) spin_lock_irqsave(shost->host_lock, flags); list_splice_init(&shost->eh_cmd_q, &eh_work_q); + shost->host_eh_scheduled = 0; spin_unlock_irqrestore(shost->host_lock, flags); SAS_DPRINTK("Enter %s\n", __func__); -- cgit v1.2.1 From bee4a186c16bed0d7e91425ca9356c2e8c015f8d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 21 Jan 2011 10:54:32 +0000 Subject: drm/i915,agp/intel: Do not clear stolen entries We can only utilize the stolen portion of the GTT if we are in sole charge of the hardware. This is only true if using GEM and KMS, otherwise VESA continues to access stolen memory. Reported-by: Arnd Bergmann Reported-by: Frederic Weisbecker Tested-by: Jiri Olsa Tested-by: Frederic Weisbecker Cc: Daniel Vetter Signed-off-by: Chris Wilson --- drivers/char/agp/intel-gtt.c | 19 +++++++++---------- drivers/gpu/drm/i915/i915_drv.h | 5 ++++- drivers/gpu/drm/i915/i915_gem.c | 10 +++++++--- drivers/gpu/drm/i915/i915_gem_gtt.c | 4 ++++ 4 files changed, 24 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 826ab0939a12..fab3d3265adb 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -68,6 +68,7 @@ static struct _intel_private { phys_addr_t gma_bus_addr; u32 PGETBL_save; u32 __iomem *gtt; /* I915G */ + bool clear_fake_agp; /* on first access via agp, fill with scratch */ int num_dcache_entries; union { void __iomem *i9xx_flush_page; @@ -869,21 +870,12 @@ static int intel_fake_agp_free_gatt_table(struct agp_bridge_data *bridge) static int intel_fake_agp_configure(void) { - int i; - if (!intel_enable_gtt()) return -EIO; + intel_private.clear_fake_agp = true; agp_bridge->gart_bus_addr = intel_private.gma_bus_addr; - for (i = 0; i < intel_private.base.gtt_total_entries; i++) { - intel_private.driver->write_entry(intel_private.scratch_page_dma, - i, 0); - } - readl(intel_private.gtt+i-1); /* PCI Posting. */ - - global_cache_flush(); - return 0; } @@ -945,6 +937,13 @@ static int intel_fake_agp_insert_entries(struct agp_memory *mem, { int ret = -EINVAL; + if (intel_private.clear_fake_agp) { + int start = intel_private.base.stolen_size / PAGE_SIZE; + int end = intel_private.base.gtt_mappable_entries; + intel_gtt_clear_range(start, end - start); + intel_private.clear_fake_agp = false; + } + if (INTEL_GTT_GEN == 1 && type == AGP_DCACHE_MEMORY) return i810_insert_dcache_entries(mem, pg_start, type); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 5969f46ac2d6..a0149c619cdd 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -543,8 +543,11 @@ typedef struct drm_i915_private { /** List of all objects in gtt_space. Used to restore gtt * mappings on resume */ struct list_head gtt_list; - /** End of mappable part of GTT */ + + /** Usable portion of the GTT for GEM */ + unsigned long gtt_start; unsigned long gtt_mappable_end; + unsigned long gtt_end; struct io_mapping *gtt_mapping; int gtt_mtrr; diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 812b97b47469..cf4f74c7c6fb 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -140,12 +140,16 @@ void i915_gem_do_init(struct drm_device *dev, { drm_i915_private_t *dev_priv = dev->dev_private; - drm_mm_init(&dev_priv->mm.gtt_space, start, - end - start); + drm_mm_init(&dev_priv->mm.gtt_space, start, end - start); + dev_priv->mm.gtt_start = start; + dev_priv->mm.gtt_mappable_end = mappable_end; + dev_priv->mm.gtt_end = end; dev_priv->mm.gtt_total = end - start; dev_priv->mm.mappable_gtt_total = min(end, mappable_end) - start; - dev_priv->mm.gtt_mappable_end = mappable_end; + + /* Take over this portion of the GTT */ + intel_gtt_clear_range(start / PAGE_SIZE, (end-start) / PAGE_SIZE); } int diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 70433ae50ac8..b0abdc64aa9f 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -34,6 +34,10 @@ void i915_gem_restore_gtt_mappings(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj; + /* First fill our portion of the GTT with scratch pages */ + intel_gtt_clear_range(dev_priv->mm.gtt_start / PAGE_SIZE, + (dev_priv->mm.gtt_end - dev_priv->mm.gtt_start) / PAGE_SIZE); + list_for_each_entry(obj, &dev_priv->mm.gtt_list, gtt_list) { i915_gem_clflush_object(obj); -- cgit v1.2.1 From 4041b85323ca00faaf8cdae22ac5cc16f1af2451 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 22 Jan 2011 10:07:56 +0000 Subject: drm/i915: Increase the amount of defense before computing vblank timestamps Reported-by: Chris Clayton Tested-by: Chris Clayton Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_irq.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index f0c87bdfa6fa..98106b7efa8b 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -274,24 +274,35 @@ int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, return ret; } -int i915_get_vblank_timestamp(struct drm_device *dev, int crtc, +int i915_get_vblank_timestamp(struct drm_device *dev, int pipe, int *max_error, struct timeval *vblank_time, unsigned flags) { - struct drm_crtc *drmcrtc; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc; - if (crtc < 0 || crtc >= dev->num_crtcs) { - DRM_ERROR("Invalid crtc %d\n", crtc); + if (pipe < 0 || pipe >= dev_priv->num_pipe) { + DRM_ERROR("Invalid crtc %d\n", pipe); return -EINVAL; } /* Get drm_crtc to timestamp: */ - drmcrtc = intel_get_crtc_for_pipe(dev, crtc); + crtc = intel_get_crtc_for_pipe(dev, pipe); + if (crtc == NULL) { + DRM_ERROR("Invalid crtc %d\n", pipe); + return -EINVAL; + } + + if (!crtc->enabled) { + DRM_DEBUG_KMS("crtc %d is disabled\n", pipe); + return -EBUSY; + } /* Helper routine in DRM core does all the work: */ - return drm_calc_vbltimestamp_from_scanoutpos(dev, crtc, max_error, - vblank_time, flags, drmcrtc); + return drm_calc_vbltimestamp_from_scanoutpos(dev, pipe, max_error, + vblank_time, flags, + crtc); } /* -- cgit v1.2.1 From 3885c6bbd0c6c9cc3c8e6d4f723abc87c593b07a Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 23 Jan 2011 10:45:14 +0000 Subject: drm/i915: Disable high-precision vblank timestamping for UMS We only have sufficient information for accurate (sub-frame) timestamping when the modesetting is under our control. Reported-by: Chris Clayton Tested-by: Chris Clayton Reviewed-by: Mario Kleiner Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_drv.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 59eb19b13b3f..66796bb82d3e 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -752,6 +752,9 @@ static int __init i915_init(void) driver.driver_features &= ~DRIVER_MODESET; #endif + if (!(driver.driver_features & DRIVER_MODESET)) + driver.get_vblank_timestamp = NULL; + return drm_init(&driver); } -- cgit v1.2.1 From 5a9a8d1a99c617df82339456fbdd30d6ed3a856b Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 23 Jan 2011 13:03:24 +0000 Subject: drm/i915: Handle the no-interrupts case for UMS by polling If the driver calls into the kernel to wait for a breadcrumb to pass, but hasn't enabled interrupts, fallback to polling the breadcrumb value. Reported-by: Chris Clayton Tested-by: Chris Clayton Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 98106b7efa8b..4b5a35c88bec 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1293,12 +1293,12 @@ static int i915_wait_irq(struct drm_device * dev, int irq_nr) if (master_priv->sarea_priv) master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT; - ret = -ENODEV; if (ring->irq_get(ring)) { DRM_WAIT_ON(ret, ring->irq_queue, 3 * DRM_HZ, READ_BREADCRUMB(dev_priv) >= irq_nr); ring->irq_put(ring); - } + } else if (wait_for(READ_BREADCRUMB(dev_priv) >= irq_nr, 3000)) + ret = -EBUSY; if (ret == -EBUSY) { DRM_ERROR("EBUSY -- rec: %d emitted: %d\n", -- cgit v1.2.1 From b705120e4198315f4ae043de06c62f65e0851fd3 Mon Sep 17 00:00:00 2001 From: Michael Karcher Date: Sun, 23 Jan 2011 18:17:17 +0000 Subject: drm/i915: Use consistent mappings for OpRegion between ACPI and i915 The opregion is a shared memory region between ACPI and the graphics driver. As the ACPI mapping has been changed to cachable in commit 6d5bbf00d251cc73223a71422d69e069dc2e0b8d, mapping the intel opregion non-cachable now fails. As no bus-master hardware is involved in the opregion, cachable map should do no harm. Tested on a Fujitsu Lifebook P8010. Signed-off-by: Michael Karcher [ickle: convert to acpi_os_ioremap for consistency] Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_opregion.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c index f295a7aaadf9..64fd64443ca6 100644 --- a/drivers/gpu/drm/i915/intel_opregion.c +++ b/drivers/gpu/drm/i915/intel_opregion.c @@ -26,6 +26,7 @@ */ #include +#include #include #include "drmP.h" @@ -476,7 +477,7 @@ int intel_opregion_setup(struct drm_device *dev) return -ENOTSUPP; } - base = ioremap(asls, OPREGION_SIZE); + base = acpi_os_ioremap(asls, OPREGION_SIZE); if (!base) return -ENOMEM; -- cgit v1.2.1 From 8e934dbf264418afe4d1dff34ce074ecc14280db Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 24 Jan 2011 12:34:00 +0000 Subject: drm/i915: Prevent uninitialised reads during error state capture error_bo and pinned_bo could be used uninitialised if there were no active buffers. Caught by kmemcheck. Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_irq.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 4b5a35c88bec..062f353497e6 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -846,6 +846,8 @@ static void i915_capture_error_state(struct drm_device *dev) i++; error->pinned_bo_count = i - error->active_bo_count; + error->active_bo = NULL; + error->pinned_bo = NULL; if (i) { error->active_bo = kmalloc(sizeof(*error->active_bo)*i, GFP_ATOMIC); -- cgit v1.2.1 From ec30f343d61391ab23705e50a525da1d55395780 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 24 Jan 2011 08:00:01 +0000 Subject: fix a shutdown regression in intel_idle Fix a shutdown regression caused by 2a2d31c8dc6f ("intel_idle: open broadcast clock event"). The clockevent framework can automatically shutdown broadcast timers for hotremove CPUs. And we get a shutdown regression when we shutdown broadcast timer for hot remove CPU, so just delete some code. Also fix some section mismatch. Reported-by: Ari Savolainen Signed-off-by: Shaohua Li Tested-by: Linus Torvalds Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- drivers/idle/intel_idle.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 7acb32e7f817..1fa091e05690 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -263,7 +263,7 @@ static void __setup_broadcast_timer(void *arg) clockevents_notify(reason, &cpu); } -static int __cpuinit setup_broadcast_cpuhp_notify(struct notifier_block *n, +static int setup_broadcast_cpuhp_notify(struct notifier_block *n, unsigned long action, void *hcpu) { int hotcpu = (unsigned long)hcpu; @@ -273,15 +273,11 @@ static int __cpuinit setup_broadcast_cpuhp_notify(struct notifier_block *n, smp_call_function_single(hotcpu, __setup_broadcast_timer, (void *)true, 1); break; - case CPU_DOWN_PREPARE: - smp_call_function_single(hotcpu, __setup_broadcast_timer, - (void *)false, 1); - break; } return NOTIFY_OK; } -static struct notifier_block __cpuinitdata setup_broadcast_notifier = { +static struct notifier_block setup_broadcast_notifier = { .notifier_call = setup_broadcast_cpuhp_notify, }; -- cgit v1.2.1 From 6b28405395f7ec492ea69f541cc774adcb9e00ca Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Axel=20K=C3=B6llhofer?= Date: Sat, 22 Jan 2011 14:33:50 -0600 Subject: staging: r8712u: Add new device IDs This patch adds several new device ids to the r8712u staging driver. The new ids were retrieved from latest vendor driver (v2.6.6.0.20101111) downloadable from www.realtek.com.tw Signed-off-by: Axel Koellhofer Signed-off-by: Larry Finger Cc: Stable [2.6.37] Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8712/usb_intf.c | 145 +++++++++++++++++++++++++++++-------- 1 file changed, 113 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c index a692ee88b9e9..21ce2af447b5 100644 --- a/drivers/staging/rtl8712/usb_intf.c +++ b/drivers/staging/rtl8712/usb_intf.c @@ -47,54 +47,123 @@ static int r871xu_drv_init(struct usb_interface *pusb_intf, static void r871xu_dev_remove(struct usb_interface *pusb_intf); static struct usb_device_id rtl871x_usb_id_tbl[] = { - /*92SU - * Realtek */ - {USB_DEVICE(0x0bda, 0x8171)}, - {USB_DEVICE(0x0bda, 0x8172)}, + +/* RTL8188SU */ + /* Realtek */ + {USB_DEVICE(0x0BDA, 0x8171)}, {USB_DEVICE(0x0bda, 0x8173)}, - {USB_DEVICE(0x0bda, 0x8174)}, {USB_DEVICE(0x0bda, 0x8712)}, {USB_DEVICE(0x0bda, 0x8713)}, {USB_DEVICE(0x0bda, 0xC512)}, - /* Abocom */ + /* Abocom */ {USB_DEVICE(0x07B8, 0x8188)}, + /* ASUS */ + {USB_DEVICE(0x0B05, 0x1786)}, + {USB_DEVICE(0x0B05, 0x1791)}, /* 11n mode disable */ + /* Belkin */ + {USB_DEVICE(0x050D, 0x945A)}, /* Corega */ - {USB_DEVICE(0x07aa, 0x0047)}, - /* Dlink */ - {USB_DEVICE(0x07d1, 0x3303)}, - {USB_DEVICE(0x07d1, 0x3302)}, - {USB_DEVICE(0x07d1, 0x3300)}, - /* Dlink for Skyworth */ - {USB_DEVICE(0x14b2, 0x3300)}, - {USB_DEVICE(0x14b2, 0x3301)}, - {USB_DEVICE(0x14b2, 0x3302)}, + {USB_DEVICE(0x07AA, 0x0047)}, + /* D-Link */ + {USB_DEVICE(0x2001, 0x3306)}, + {USB_DEVICE(0x07D1, 0x3306)}, /* 11n mode disable */ + /* Edimax */ + {USB_DEVICE(0x7392, 0x7611)}, /* EnGenius */ {USB_DEVICE(0x1740, 0x9603)}, - {USB_DEVICE(0x1740, 0x9605)}, + /* Hawking */ + {USB_DEVICE(0x0E66, 0x0016)}, + /* Hercules */ + {USB_DEVICE(0x06F8, 0xE034)}, + {USB_DEVICE(0x06F8, 0xE032)}, + /* Logitec */ + {USB_DEVICE(0x0789, 0x0167)}, + /* PCI */ + {USB_DEVICE(0x2019, 0xAB28)}, + {USB_DEVICE(0x2019, 0xED16)}, + /* Sitecom */ + {USB_DEVICE(0x0DF6, 0x0057)}, + {USB_DEVICE(0x0DF6, 0x0045)}, + {USB_DEVICE(0x0DF6, 0x0059)}, /* 11n mode disable */ + {USB_DEVICE(0x0DF6, 0x004B)}, + {USB_DEVICE(0x0DF6, 0x0063)}, + /* Sweex */ + {USB_DEVICE(0x177F, 0x0154)}, + /* Thinkware */ + {USB_DEVICE(0x0BDA, 0x5077)}, + /* Toshiba */ + {USB_DEVICE(0x1690, 0x0752)}, + /* - */ + {USB_DEVICE(0x20F4, 0x646B)}, + {USB_DEVICE(0x083A, 0xC512)}, + +/* RTL8191SU */ + /* Realtek */ + {USB_DEVICE(0x0BDA, 0x8172)}, + /* Amigo */ + {USB_DEVICE(0x0EB0, 0x9061)}, + /* ASUS/EKB */ + {USB_DEVICE(0x0BDA, 0x8172)}, + {USB_DEVICE(0x13D3, 0x3323)}, + {USB_DEVICE(0x13D3, 0x3311)}, /* 11n mode disable */ + {USB_DEVICE(0x13D3, 0x3342)}, + /* ASUS/EKBLenovo */ + {USB_DEVICE(0x13D3, 0x3333)}, + {USB_DEVICE(0x13D3, 0x3334)}, + {USB_DEVICE(0x13D3, 0x3335)}, /* 11n mode disable */ + {USB_DEVICE(0x13D3, 0x3336)}, /* 11n mode disable */ + /* ASUS/Media BOX */ + {USB_DEVICE(0x13D3, 0x3309)}, /* Belkin */ - {USB_DEVICE(0x050d, 0x815F)}, - {USB_DEVICE(0x050d, 0x945A)}, - {USB_DEVICE(0x050d, 0x845A)}, - /* Guillemot */ - {USB_DEVICE(0x06f8, 0xe031)}, + {USB_DEVICE(0x050D, 0x815F)}, + /* D-Link */ + {USB_DEVICE(0x07D1, 0x3302)}, + {USB_DEVICE(0x07D1, 0x3300)}, + {USB_DEVICE(0x07D1, 0x3303)}, /* Edimax */ - {USB_DEVICE(0x7392, 0x7611)}, {USB_DEVICE(0x7392, 0x7612)}, - {USB_DEVICE(0x7392, 0x7622)}, - /* Sitecom */ - {USB_DEVICE(0x0DF6, 0x0045)}, + /* EnGenius */ + {USB_DEVICE(0x1740, 0x9605)}, + /* Guillemot */ + {USB_DEVICE(0x06F8, 0xE031)}, /* Hawking */ {USB_DEVICE(0x0E66, 0x0015)}, - {USB_DEVICE(0x0E66, 0x0016)}, - {USB_DEVICE(0x0b05, 0x1786)}, - {USB_DEVICE(0x0b05, 0x1791)}, /* 11n mode disable */ - + /* Mediao */ {USB_DEVICE(0x13D3, 0x3306)}, - {USB_DEVICE(0x13D3, 0x3309)}, + /* PCI */ + {USB_DEVICE(0x2019, 0xED18)}, + {USB_DEVICE(0x2019, 0x4901)}, + /* Sitecom */ + {USB_DEVICE(0x0DF6, 0x0058)}, + {USB_DEVICE(0x0DF6, 0x0049)}, + {USB_DEVICE(0x0DF6, 0x004C)}, + {USB_DEVICE(0x0DF6, 0x0064)}, + /* Skyworth */ + {USB_DEVICE(0x14b2, 0x3300)}, + {USB_DEVICE(0x14b2, 0x3301)}, + {USB_DEVICE(0x14B2, 0x3302)}, + /* - */ + {USB_DEVICE(0x04F2, 0xAFF2)}, + {USB_DEVICE(0x04F2, 0xAFF5)}, + {USB_DEVICE(0x04F2, 0xAFF6)}, + {USB_DEVICE(0x13D3, 0x3339)}, + {USB_DEVICE(0x13D3, 0x3340)}, /* 11n mode disable */ + {USB_DEVICE(0x13D3, 0x3341)}, /* 11n mode disable */ {USB_DEVICE(0x13D3, 0x3310)}, - {USB_DEVICE(0x13D3, 0x3311)}, /* 11n mode disable */ {USB_DEVICE(0x13D3, 0x3325)}, - {USB_DEVICE(0x083A, 0xC512)}, + +/* RTL8192SU */ + /* Realtek */ + {USB_DEVICE(0x0BDA, 0x8174)}, + {USB_DEVICE(0x0BDA, 0x8174)}, + /* Belkin */ + {USB_DEVICE(0x050D, 0x845A)}, + /* Corega */ + {USB_DEVICE(0x07AA, 0x0051)}, + /* Edimax */ + {USB_DEVICE(0x7392, 0x7622)}, + /* NEC */ + {USB_DEVICE(0x0409, 0x02B6)}, {} }; @@ -103,8 +172,20 @@ MODULE_DEVICE_TABLE(usb, rtl871x_usb_id_tbl); static struct specific_device_id specific_device_id_tbl[] = { {.idVendor = 0x0b05, .idProduct = 0x1791, .flags = SPEC_DEV_ID_DISABLE_HT}, + {.idVendor = 0x0df6, .idProduct = 0x0059, + .flags = SPEC_DEV_ID_DISABLE_HT}, + {.idVendor = 0x13d3, .idProduct = 0x3306, + .flags = SPEC_DEV_ID_DISABLE_HT}, {.idVendor = 0x13D3, .idProduct = 0x3311, .flags = SPEC_DEV_ID_DISABLE_HT}, + {.idVendor = 0x13d3, .idProduct = 0x3335, + .flags = SPEC_DEV_ID_DISABLE_HT}, + {.idVendor = 0x13d3, .idProduct = 0x3336, + .flags = SPEC_DEV_ID_DISABLE_HT}, + {.idVendor = 0x13d3, .idProduct = 0x3340, + .flags = SPEC_DEV_ID_DISABLE_HT}, + {.idVendor = 0x13d3, .idProduct = 0x3341, + .flags = SPEC_DEV_ID_DISABLE_HT}, {} }; -- cgit v1.2.1 From 58bbf018a70c562437eeae121a5d021ba7fe56a5 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 24 Jan 2011 17:14:26 -0500 Subject: drm/radeon/kms: add new radeon_info ioctl query for clock crystal freq Needed for timer queries in the 3D driver. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_drv.c | 2 +- drivers/gpu/drm/radeon/radeon_kms.c | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index d5680a0c87af..275b26a708d6 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -48,7 +48,7 @@ * - 2.5.0 - add get accel 2 to work around ddx breakage for evergreen * - 2.6.0 - add tiling config query (r6xx+), add initial HiZ support (r300->r500) * 2.7.0 - fixups for r600 2D tiling support. (no external ABI change), add eg dyn gpr regs - * 2.8.0 - pageflip support, r500 US_FORMAT regs. r500 ARGB2101010 colorbuf, r300->r500 CMASK + * 2.8.0 - pageflip support, r500 US_FORMAT regs. r500 ARGB2101010 colorbuf, r300->r500 CMASK, clock crystal query */ #define KMS_DRIVER_MAJOR 2 #define KMS_DRIVER_MINOR 8 diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 28a53e4a925f..98321298cffd 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -201,6 +201,10 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) } radeon_set_filp_rights(dev, &rdev->cmask_filp, filp, &value); break; + case RADEON_INFO_CLOCK_CRYSTAL_FREQ: + /* return clock value in KHz */ + value = rdev->clock.spll.reference_freq * 10; + break; default: DRM_DEBUG_KMS("Invalid request %d\n", info->request); return -EINVAL; -- cgit v1.2.1 From 1c2a679aa99d4b9d01004863d72d818534d4ac54 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 18 Jan 2011 14:46:19 +1000 Subject: drm/nouveau: remove dead function definition Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drv.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 51920321d058..ca707d18d06e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -846,9 +846,6 @@ extern void nv10_mem_put_tile_region(struct drm_device *dev, struct nouveau_fence *fence); extern const struct ttm_mem_type_manager_func nouveau_vram_manager; -/* nvc0_vram.c */ -extern const struct ttm_mem_type_manager_func nvc0_vram_manager; - /* nouveau_notifier.c */ extern int nouveau_notifier_init_channel(struct nouveau_channel *); extern void nouveau_notifier_takedown_channel(struct nouveau_channel *); -- cgit v1.2.1 From b26e72fbb58d3665a75b58679535a8e283da5a11 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 19 Jan 2011 15:54:10 +1000 Subject: drm/nouveau: probe for adt7473 before f75375 There's a reported case where probing for f75375 causes the system to hang completely, in this case there's an adt7473 at the same i2c address. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_temp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_temp.c b/drivers/gpu/drm/nouveau/nouveau_temp.c index 7ecc4adc1e45..8d9968e1cba8 100644 --- a/drivers/gpu/drm/nouveau/nouveau_temp.c +++ b/drivers/gpu/drm/nouveau/nouveau_temp.c @@ -265,8 +265,8 @@ nouveau_temp_probe_i2c(struct drm_device *dev) struct i2c_board_info info[] = { { I2C_BOARD_INFO("w83l785ts", 0x2d) }, { I2C_BOARD_INFO("w83781d", 0x2d) }, - { I2C_BOARD_INFO("f75375", 0x2e) }, { I2C_BOARD_INFO("adt7473", 0x2e) }, + { I2C_BOARD_INFO("f75375", 0x2e) }, { I2C_BOARD_INFO("lm99", 0x4c) }, { } }; -- cgit v1.2.1 From 0f1cb203b46f8f836afdd2198060ff6169aa7272 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 21 Jan 2011 11:15:16 +1000 Subject: drm/nvc0: fix incorrect TPC register setup Was hitting TPC+1's regs by accident, oops. Reported-by: Christoph Bumiller Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_graph.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvc0_graph.c b/drivers/gpu/drm/nouveau/nvc0_graph.c index e6ea7d83187f..df393f01bf08 100644 --- a/drivers/gpu/drm/nouveau/nvc0_graph.c +++ b/drivers/gpu/drm/nouveau/nvc0_graph.c @@ -512,8 +512,8 @@ nvc0_graph_init_gpc_1(struct drm_device *dev) nv_wr32(dev, TP_UNIT(gpc, tp, 0x224), 0xc0000000); nv_wr32(dev, TP_UNIT(gpc, tp, 0x48c), 0xc0000000); nv_wr32(dev, TP_UNIT(gpc, tp, 0x084), 0xc0000000); - nv_wr32(dev, TP_UNIT(gpc, tp, 0xe44), 0x001ffffe); - nv_wr32(dev, TP_UNIT(gpc, tp, 0xe4c), 0x0000000f); + nv_wr32(dev, TP_UNIT(gpc, tp, 0x644), 0x001ffffe); + nv_wr32(dev, TP_UNIT(gpc, tp, 0x64c), 0x0000000f); } nv_wr32(dev, GPC_UNIT(gpc, 0x2c90), 0xffffffff); nv_wr32(dev, GPC_UNIT(gpc, 0x2c94), 0xffffffff); -- cgit v1.2.1 From 51f73d64b46cb765cd5bee3b8d9f5980c44c6446 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 21 Jan 2011 13:53:21 +1000 Subject: drm/nvc0: implement irq handler for whatever's at 0x14xxxx This is just barely enough to stop a never-ending IRQ storm that can be triggered by our 3D driver. We have no idea what this engine is.. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_graph.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvc0_graph.c b/drivers/gpu/drm/nouveau/nvc0_graph.c index df393f01bf08..eb18a7e89f5b 100644 --- a/drivers/gpu/drm/nouveau/nvc0_graph.c +++ b/drivers/gpu/drm/nouveau/nvc0_graph.c @@ -31,6 +31,7 @@ #include "nvc0_graph.h" static void nvc0_graph_isr(struct drm_device *); +static void nvc0_runk140_isr(struct drm_device *); static int nvc0_graph_unload_context_to(struct drm_device *dev, u64 chan); void @@ -281,6 +282,7 @@ nvc0_graph_destroy(struct drm_device *dev) return; nouveau_irq_unregister(dev, 12); + nouveau_irq_unregister(dev, 25); nouveau_gpuobj_ref(NULL, &priv->unk4188b8); nouveau_gpuobj_ref(NULL, &priv->unk4188b4); @@ -390,6 +392,7 @@ nvc0_graph_create(struct drm_device *dev) } nouveau_irq_register(dev, 12, nvc0_graph_isr); + nouveau_irq_register(dev, 25, nvc0_runk140_isr); NVOBJ_CLASS(dev, 0x902d, GR); /* 2D */ NVOBJ_CLASS(dev, 0x9039, GR); /* M2MF */ NVOBJ_CLASS(dev, 0x9097, GR); /* 3D */ @@ -777,3 +780,19 @@ nvc0_graph_isr(struct drm_device *dev) nv_wr32(dev, 0x400500, 0x00010001); } + +static void +nvc0_runk140_isr(struct drm_device *dev) +{ + u32 units = nv_rd32(dev, 0x00017c) & 0x1f; + + while (units) { + u32 unit = ffs(units) - 1; + u32 reg = 0x140000 + unit * 0x2000; + u32 st0 = nv_mask(dev, reg + 0x1020, 0, 0); + u32 st1 = nv_mask(dev, reg + 0x1420, 0, 0); + + NV_INFO(dev, "PRUNK140: %d 0x%08x 0x%08x\n", unit, st0, st1); + units &= ~(1 << unit); + } +} -- cgit v1.2.1 From 670820c0e6a9c82dd2f96663dc4c6aec2a18c32b Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sat, 25 Dec 2010 15:43:30 +0100 Subject: drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200. Fixes the DVI-D output on that board (fdo bug 32645). Reported-by: Bryan Quigley Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bios.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index d3046559bf05..c85a71596688 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -6310,6 +6310,9 @@ void merge_like_dcb_entries(struct drm_device *dev, struct dcb_table *dcb) static bool apply_dcb_encoder_quirks(struct drm_device *dev, int idx, u32 *conn, u32 *conf) { + struct drm_nouveau_private *dev_priv = dev->dev_private; + struct dcb_table *dcb = &dev_priv->vbios.dcb; + /* Dell Precision M6300 * DCB entry 2: 02025312 00000010 * DCB entry 3: 02026312 00000020 @@ -6327,6 +6330,18 @@ apply_dcb_encoder_quirks(struct drm_device *dev, int idx, u32 *conn, u32 *conf) return false; } + /* GeForce3 Ti 200 + * + * DCB reports an LVDS output that should be TMDS: + * DCB entry 1: f2005014 ffffffff + */ + if (nv_match_device(dev, 0x0201, 0x1462, 0x8851)) { + if (*conn == 0xf2005014 && *conf == 0xffffffff) { + fabricate_dcb_output(dcb, OUTPUT_TMDS, 1, 1, 1); + return false; + } + } + return true; } -- cgit v1.2.1 From 34311c730147def6862304488ee1f7c3f4acd74b Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Mon, 24 Jan 2011 01:47:42 +0100 Subject: drm/nv50: Fix race with PFIFO during PGRAPH context destruction. Reported-by: Xavier Chantry Signed-off-by: Francisco Jerez Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_graph.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c index 2d7ea75a09d4..37e21d2be95b 100644 --- a/drivers/gpu/drm/nouveau/nv50_graph.c +++ b/drivers/gpu/drm/nouveau/nv50_graph.c @@ -256,6 +256,7 @@ nv50_graph_destroy_context(struct nouveau_channel *chan) struct drm_device *dev = chan->dev; struct drm_nouveau_private *dev_priv = dev->dev_private; struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph; + struct nouveau_fifo_engine *pfifo = &dev_priv->engine.fifo; int i, hdr = (dev_priv->chipset == 0x50) ? 0x200 : 0x20; unsigned long flags; @@ -265,6 +266,7 @@ nv50_graph_destroy_context(struct nouveau_channel *chan) return; spin_lock_irqsave(&dev_priv->context_switch_lock, flags); + pfifo->reassign(dev, false); pgraph->fifo_access(dev, false); if (pgraph->channel(dev) == chan) @@ -275,6 +277,7 @@ nv50_graph_destroy_context(struct nouveau_channel *chan) dev_priv->engine.instmem.flush(dev); pgraph->fifo_access(dev, true); + pfifo->reassign(dev, true); spin_unlock_irqrestore(&dev_priv->context_switch_lock, flags); nouveau_gpuobj_ref(NULL, &chan->ramin_grctx); -- cgit v1.2.1 From 5d07929808a6430d3d844db4da828dfadbc49cd2 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 21 Jan 2011 22:34:13 +1000 Subject: drm/nvc0/grctx: correct an off-by-one Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_grctx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvc0_grctx.c b/drivers/gpu/drm/nouveau/nvc0_grctx.c index b9e68b2d30aa..f880ff776db8 100644 --- a/drivers/gpu/drm/nouveau/nvc0_grctx.c +++ b/drivers/gpu/drm/nouveau/nvc0_grctx.c @@ -1830,7 +1830,7 @@ nvc0_grctx_generate(struct nouveau_channel *chan) for (tp = 0, id = 0; tp < 4; tp++) { for (gpc = 0; gpc < priv->gpc_nr; gpc++) { - if (tp <= priv->tp_nr[gpc]) { + if (tp < priv->tp_nr[gpc]) { nv_wr32(dev, TP_UNIT(gpc, tp, 0x698), id); nv_wr32(dev, TP_UNIT(gpc, tp, 0x4e8), id); nv_wr32(dev, GPC_UNIT(gpc, 0x0c10 + tp * 4), id); -- cgit v1.2.1 From 360c202bebfecbedb129c07361ae8a738552eae3 Mon Sep 17 00:00:00 2001 From: axel lin Date: Thu, 20 Jan 2011 03:50:51 +0000 Subject: video: da8xx-fb: fix fb_probe error path Current implementation puts CONFIG_CPU_FREQ at wrong place, CONFIG_CPU_FREQ is for lcd_da8xx_cpufreq_deregister not for unregister_framebuffer. Signed-off-by: Axel Lin Signed-off-by: Paul Mundt --- drivers/video/da8xx-fb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index c265aed09e04..520047ac6e3e 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -1092,9 +1092,10 @@ static int __init fb_probe(struct platform_device *device) irq_freq: #ifdef CONFIG_CPU_FREQ + lcd_da8xx_cpufreq_deregister(par); +#endif err_cpu_freq: unregister_framebuffer(da8xx_fb_info); -#endif err_dealloc_cmap: fb_dealloc_cmap(&da8xx_fb_info->cmap); -- cgit v1.2.1 From e88e43b0c564864c883103483bad6219f77dfb52 Mon Sep 17 00:00:00 2001 From: axel lin Date: Fri, 21 Jan 2011 11:18:06 +0000 Subject: video: pxa168fb: remove a redundant pxa168fb_check_var call Current implementation calls pxa168fb_check_var twice in pxa168fb_probe. Signed-off-by: Axel Lin Signed-off-by: Paul Mundt --- drivers/video/pxa168fb.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c index cea6403ae71c..35f61dd0cb3a 100644 --- a/drivers/video/pxa168fb.c +++ b/drivers/video/pxa168fb.c @@ -701,16 +701,12 @@ static int __devinit pxa168fb_probe(struct platform_device *pdev) */ pxa168fb_init_mode(info, mi); - ret = pxa168fb_check_var(&info->var, info); - if (ret) - goto failed_free_fbmem; - /* * Fill in sane defaults. */ ret = pxa168fb_check_var(&info->var, info); if (ret) - goto failed; + goto failed_free_fbmem; /* * enable controller clock -- cgit v1.2.1 From 5dc1365cefb6bd8770d54a2154097445c30fe4bc Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 24 Jan 2011 19:55:21 +0000 Subject: drivers/video/bf537-lq035.c: Add missing IS_ERR test lcd_device_register may return ERR_PTR, so a check is added for this value before the dereference. All of the other changes reorganize the error handling code in this function to avoid duplicating all of it in the added case. In the original code, in one case, the global variable fb_buffer was set to NULL in error code that appears after this variable is initialized. This is done now in all error handling code that has this property. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r@ identifier f; @@ f(...) { ... return ERR_PTR(...); } @@ identifier r.f, fld; expression x; statement S1,S2; @@ x = f(...) ... when != IS_ERR(x) ( if (IS_ERR(x) ||...) S1 else S2 | *x->fld ) // Signed-off-by: Julia Lawall Acked-by: Mike Frysinger Signed-off-by: Paul Mundt --- drivers/video/bf537-lq035.c | 58 ++++++++++++++++++++++++++------------------- 1 file changed, 33 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/video/bf537-lq035.c b/drivers/video/bf537-lq035.c index 18c507874ff1..47c21fb2c82f 100644 --- a/drivers/video/bf537-lq035.c +++ b/drivers/video/bf537-lq035.c @@ -696,6 +696,7 @@ static int __devinit bfin_lq035_probe(struct platform_device *pdev) { struct backlight_properties props; dma_addr_t dma_handle; + int ret; if (request_dma(CH_PPI, KBUILD_MODNAME)) { pr_err("couldn't request PPI DMA\n"); @@ -704,17 +705,16 @@ static int __devinit bfin_lq035_probe(struct platform_device *pdev) if (request_ports()) { pr_err("couldn't request gpio port\n"); - free_dma(CH_PPI); - return -EFAULT; + ret = -EFAULT; + goto out_ports; } fb_buffer = dma_alloc_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, &dma_handle, GFP_KERNEL); if (fb_buffer == NULL) { pr_err("couldn't allocate dma buffer\n"); - free_dma(CH_PPI); - free_ports(); - return -ENOMEM; + ret = -ENOMEM; + goto out_dma_coherent; } if (L1_DATA_A_LENGTH) @@ -725,10 +725,8 @@ static int __devinit bfin_lq035_probe(struct platform_device *pdev) if (dma_desc_table == NULL) { pr_err("couldn't allocate dma descriptor\n"); - free_dma(CH_PPI); - free_ports(); - dma_free_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, fb_buffer, 0); - return -ENOMEM; + ret = -ENOMEM; + goto out_table; } bfin_lq035_fb.screen_base = (void *)fb_buffer; @@ -771,31 +769,21 @@ static int __devinit bfin_lq035_probe(struct platform_device *pdev) bfin_lq035_fb.pseudo_palette = kzalloc(sizeof(u32) * 16, GFP_KERNEL); if (bfin_lq035_fb.pseudo_palette == NULL) { pr_err("failed to allocate pseudo_palette\n"); - free_dma(CH_PPI); - free_ports(); - dma_free_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, fb_buffer, 0); - return -ENOMEM; + ret = -ENOMEM; + goto out_palette; } if (fb_alloc_cmap(&bfin_lq035_fb.cmap, NBR_PALETTE, 0) < 0) { pr_err("failed to allocate colormap (%d entries)\n", NBR_PALETTE); - free_dma(CH_PPI); - free_ports(); - dma_free_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, fb_buffer, 0); - kfree(bfin_lq035_fb.pseudo_palette); - return -EFAULT; + ret = -EFAULT; + goto out_cmap; } if (register_framebuffer(&bfin_lq035_fb) < 0) { pr_err("unable to register framebuffer\n"); - free_dma(CH_PPI); - free_ports(); - dma_free_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, fb_buffer, 0); - fb_buffer = NULL; - kfree(bfin_lq035_fb.pseudo_palette); - fb_dealloc_cmap(&bfin_lq035_fb.cmap); - return -EINVAL; + ret = -EINVAL; + goto out_reg; } i2c_add_driver(&ad5280_driver); @@ -807,11 +795,31 @@ static int __devinit bfin_lq035_probe(struct platform_device *pdev) lcd_dev = lcd_device_register(KBUILD_MODNAME, &pdev->dev, NULL, &bfin_lcd_ops); + if (IS_ERR(lcd_dev)) { + pr_err("unable to register lcd\n"); + ret = PTR_ERR(lcd_dev); + goto out_lcd; + } lcd_dev->props.max_contrast = 255, pr_info("initialized"); return 0; +out_lcd: + unregister_framebuffer(&bfin_lq035_fb); +out_reg: + fb_dealloc_cmap(&bfin_lq035_fb.cmap); +out_cmap: + kfree(bfin_lq035_fb.pseudo_palette); +out_palette: +out_table: + dma_free_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, fb_buffer, 0); + fb_buffer = NULL; +out_dma_coherent: + free_ports(); +out_ports: + free_dma(CH_PPI); + return ret; } static int __devexit bfin_lq035_remove(struct platform_device *pdev) -- cgit v1.2.1 From 63b1dd07fa378f2683ad03e543c36ec76f489364 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Wed, 19 Jan 2011 06:24:02 +0000 Subject: video: fix some comments in drivers/video/console/vgacon.c Now vgacon_scrollback_startup() uses slab, not bootmem, the comment above it is obsolete, so does __init_refok. Signed-off-by: WANG Cong Signed-off-by: Paul Mundt --- drivers/video/console/vgacon.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index c97491b8b39b..915fd74da7a2 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -202,11 +202,7 @@ static void vgacon_scrollback_init(int pitch) } } -/* - * Called only duing init so call of alloc_bootmen is ok. - * Marked __init_refok to silence modpost. - */ -static void __init_refok vgacon_scrollback_startup(void) +static void vgacon_scrollback_startup(void) { vgacon_scrollback = kcalloc(CONFIG_VGACON_SOFT_SCROLLBACK_SIZE, 1024, GFP_NOWAIT); vgacon_scrollback_init(vga_video_num_columns * 2); -- cgit v1.2.1 From 7c8104774e59549c37dd1cb0a8ec4f131094664c Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 24 Jan 2011 12:59:02 +0000 Subject: bnx2: Always set ETH_FLAG_TXVLAN TSO does not work if the VLAN tag is in the packet (non-accelerated). We may be able to remove this restriction in future firmware. Reported-by: Eric Dumazet Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index df99edf3464a..99e7652e2169 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -7553,6 +7553,10 @@ bnx2_set_flags(struct net_device *dev, u32 data) !(data & ETH_FLAG_RXVLAN)) return -EINVAL; + /* TSO with VLAN tag won't work with current firmware */ + if (!(data & ETH_FLAG_TXVLAN)) + return -EINVAL; + rc = ethtool_op_set_flags(dev, data, ETH_FLAG_RXHASH | ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN); if (rc) -- cgit v1.2.1 From 2321f3b4afc7c017f34b0cad0624b3b9ebdf2ba4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 24 Jan 2011 23:19:10 -0800 Subject: pch_gbe: don't use flush_scheduled_work() Directly cancel adapter->reset_task instead of using to-be-deprecated flush_scheduled_work(). Signed-off-by: Tejun Heo Signed-off-by: David S. Miller --- drivers/net/pch_gbe/pch_gbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c index d7355306a738..1bf12339441b 100644 --- a/drivers/net/pch_gbe/pch_gbe_main.c +++ b/drivers/net/pch_gbe/pch_gbe_main.c @@ -2247,7 +2247,7 @@ static void pch_gbe_remove(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct pch_gbe_adapter *adapter = netdev_priv(netdev); - flush_scheduled_work(); + cancel_work_sync(&adapter->reset_task); unregister_netdev(netdev); pch_gbe_hal_phy_hw_reset(&adapter->hw); -- cgit v1.2.1 From 986e3f6e2b4582d9a7e61de5090042d5af85da44 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 23 Jan 2011 12:19:55 +0000 Subject: USB NET KL5KUSB101: Fix mem leak in error path of kaweth_download_firmware() We will leak the storage allocated by request_firmware() if the size of the firmware is greater than KAWETH_FIRMWARE_BUF_SIZE. This removes the leak by calling release_firmware() before we return -ENOSPC. Signed-off-by: Jesper Juhl Signed-off-by: David S. Miller --- drivers/net/usb/kaweth.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index 5e98643a4a21..7dc84971f26f 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -406,6 +406,7 @@ static int kaweth_download_firmware(struct kaweth_device *kaweth, if (fw->size > KAWETH_FIRMWARE_BUF_SIZE) { err("Firmware too big: %zu", fw->size); + release_firmware(fw); return -ENOSPC; } data_len = fw->size; -- cgit v1.2.1 From a20f0bc10c47fcf62be027e1a50b62791052ab56 Mon Sep 17 00:00:00 2001 From: Kalhan Trisal Date: Tue, 25 Jan 2011 14:24:37 +0000 Subject: hwmon: (lis3) turn down the no IRQ message Turn down the no IRQ message - on some platforms that's a normal state of affairs. Signed-off-by: Kalhan Trisal Signed-off-by: Alan Cox Acked-by: Eric Piel Signed-off-by: Guenter Roeck --- drivers/hwmon/lis3lv02d.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c index 1b674b7d4584..d805e8e57967 100644 --- a/drivers/hwmon/lis3lv02d.c +++ b/drivers/hwmon/lis3lv02d.c @@ -957,7 +957,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev) /* bail if we did not get an IRQ from the bus layer */ if (!dev->irq) { - pr_err("No IRQ. Disabling /dev/freefall\n"); + pr_debug("No IRQ. Disabling /dev/freefall\n"); goto out; } -- cgit v1.2.1 From d121a5d2a098ba6dd033dd195f5ccbf7558c37b6 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 25 Jan 2011 15:00:01 +0000 Subject: drm/i915/sdvo: If at first we don't succeed in reading the response, wait We were not pausing after detecting the response was pending and so did not allow the hardware sufficient time to complete before aborting. This lead to transient failures whilst probing SDVO devices. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30235 Reported-by: Knut Petersen Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_sdvo.c | 46 +++++++++++++++++++-------------------- 1 file changed, 23 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 45cd37652a37..6a09c1413d60 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -473,20 +473,6 @@ static bool intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd, return false; } - i = 3; - while (status == SDVO_CMD_STATUS_PENDING && i--) { - if (!intel_sdvo_read_byte(intel_sdvo, - SDVO_I2C_CMD_STATUS, - &status)) - return false; - } - if (status != SDVO_CMD_STATUS_SUCCESS) { - DRM_DEBUG_KMS("command returns response %s [%d]\n", - status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP ? cmd_status_names[status] : "???", - status); - return false; - } - return true; } @@ -497,6 +483,8 @@ static bool intel_sdvo_read_response(struct intel_sdvo *intel_sdvo, u8 status; int i; + DRM_DEBUG_KMS("%s: R: ", SDVO_NAME(intel_sdvo)); + /* * The documentation states that all commands will be * processed within 15µs, and that we need only poll @@ -505,14 +493,19 @@ static bool intel_sdvo_read_response(struct intel_sdvo *intel_sdvo, * * Check 5 times in case the hardware failed to read the docs. */ - do { + if (!intel_sdvo_read_byte(intel_sdvo, + SDVO_I2C_CMD_STATUS, + &status)) + goto log_fail; + + while (status == SDVO_CMD_STATUS_PENDING && retry--) { + udelay(15); if (!intel_sdvo_read_byte(intel_sdvo, SDVO_I2C_CMD_STATUS, &status)) - return false; - } while (status == SDVO_CMD_STATUS_PENDING && --retry); + goto log_fail; + } - DRM_DEBUG_KMS("%s: R: ", SDVO_NAME(intel_sdvo)); if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP) DRM_LOG_KMS("(%s)", cmd_status_names[status]); else @@ -533,7 +526,7 @@ static bool intel_sdvo_read_response(struct intel_sdvo *intel_sdvo, return true; log_fail: - DRM_LOG_KMS("\n"); + DRM_LOG_KMS("... failed\n"); return false; } @@ -550,6 +543,7 @@ static int intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode) static bool intel_sdvo_set_control_bus_switch(struct intel_sdvo *intel_sdvo, u8 ddc_bus) { + /* This must be the immediately preceding write before the i2c xfer */ return intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_CONTROL_BUS_SWITCH, &ddc_bus, 1); @@ -557,7 +551,10 @@ static bool intel_sdvo_set_control_bus_switch(struct intel_sdvo *intel_sdvo, static bool intel_sdvo_set_value(struct intel_sdvo *intel_sdvo, u8 cmd, const void *data, int len) { - return intel_sdvo_write_cmd(intel_sdvo, cmd, data, len); + if (!intel_sdvo_write_cmd(intel_sdvo, cmd, data, len)) + return false; + + return intel_sdvo_read_response(intel_sdvo, NULL, 0); } static bool @@ -859,18 +856,21 @@ static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo) intel_dip_infoframe_csum(&avi_if); - if (!intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_HBUF_INDEX, + if (!intel_sdvo_set_value(intel_sdvo, + SDVO_CMD_SET_HBUF_INDEX, set_buf_index, 2)) return false; for (i = 0; i < sizeof(avi_if); i += 8) { - if (!intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_HBUF_DATA, + if (!intel_sdvo_set_value(intel_sdvo, + SDVO_CMD_SET_HBUF_DATA, data, 8)) return false; data++; } - return intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_HBUF_TXRATE, + return intel_sdvo_set_value(intel_sdvo, + SDVO_CMD_SET_HBUF_TXRATE, &tx_rate, 1); } -- cgit v1.2.1 From eb03355660b44cf6b1ed2f895085b9de8f74efbc Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 24 Jan 2011 15:11:08 +0000 Subject: drm: Add an interface to reset the device Iterate over the attached CRTCs, encoders and connectors and call the supplied reset vfunc in order to reset any cached state back to unknown. Useful after an invalidation event such as a GPU reset or resuming. Tested-by: Takashi Iwai Signed-off-by: Chris Wilson --- drivers/gpu/drm/drm_crtc.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 2baa6708e44c..654faa803dcb 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -2674,3 +2674,23 @@ out: mutex_unlock(&dev->mode_config.mutex); return ret; } + +void drm_mode_config_reset(struct drm_device *dev) +{ + struct drm_crtc *crtc; + struct drm_encoder *encoder; + struct drm_connector *connector; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) + if (crtc->funcs->reset) + crtc->funcs->reset(crtc); + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) + if (encoder->funcs->reset) + encoder->funcs->reset(encoder); + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + if (connector->funcs->reset) + connector->funcs->reset(connector); +} +EXPORT_SYMBOL(drm_mode_config_reset); -- cgit v1.2.1 From 500f7147cf5bafd139056d521536b10c2bc2e154 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 24 Jan 2011 15:14:41 +0000 Subject: drm/i915: Reset state after a GPU reset or resume Call drm_mode_config_reset() after an invalidation event to restore any cached state to unknown. Tested-by: Takashi Iwai Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_drv.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 66796bb82d3e..e517447b0880 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -354,6 +354,7 @@ static int i915_drm_thaw(struct drm_device *dev) error = i915_gem_init_ringbuffer(dev); mutex_unlock(&dev->struct_mutex); + drm_mode_config_reset(dev); drm_irq_install(dev); /* Resume the modeset for every activated CRTC */ @@ -542,6 +543,7 @@ int i915_reset(struct drm_device *dev, u8 flags) mutex_unlock(&dev->struct_mutex); drm_irq_uninstall(dev); + drm_mode_config_reset(dev); drm_irq_install(dev); mutex_lock(&dev->struct_mutex); } -- cgit v1.2.1 From f3269058e7a80083dcdf89698bfcd1a6c6f8fd12 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 24 Jan 2011 15:17:08 +0000 Subject: drm/i915/crt: Force the initial probe after reset Upon resume, like after a cold boot, we need to forcibly probe the analog connector and cannot rely on the hotplug status. Based on a patch by Takashi Iwai. Reported-by: Stefan Dirsch Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=26952 Tested-by: Takashi Iwai Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_crt.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 17035b87ee46..8a77ff4a7237 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -535,6 +535,15 @@ static int intel_crt_set_property(struct drm_connector *connector, return 0; } +static void intel_crt_reset(struct drm_connector *connector) +{ + struct drm_device *dev = connector->dev; + struct intel_crt *crt = intel_attached_crt(connector); + + if (HAS_PCH_SPLIT(dev)) + crt->force_hotplug_required = 1; +} + /* * Routines for controlling stuff on the analog port */ @@ -548,6 +557,7 @@ static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = { }; static const struct drm_connector_funcs intel_crt_connector_funcs = { + .reset = intel_crt_reset, .dpms = drm_helper_connector_dpms, .detect = intel_crt_detect, .fill_modes = drm_helper_probe_single_connector_modes, -- cgit v1.2.1 From 5d1d0cc87fc0887921993ea0742932e0c8adeda0 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 24 Jan 2011 15:02:15 +0000 Subject: drm/i915: Reset crtc after resume Based on a patch by Takashi Iwai. Reported-by: Matthias Hopf Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=27272 Tested-by: Takashi Iwai Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_display.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d7f237deaaf0..7e42aa586504 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5551,6 +5551,18 @@ cleanup_work: return ret; } +static void intel_crtc_reset(struct drm_crtc *crtc) +{ + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + + /* Reset flags back to the 'unknown' status so that they + * will be correctly set on the initial modeset. + */ + intel_crtc->cursor_addr = 0; + intel_crtc->dpms_mode = -1; + intel_crtc->active = true; /* force the pipe off on setup_init_config */ +} + static struct drm_crtc_helper_funcs intel_helper_funcs = { .dpms = intel_crtc_dpms, .mode_fixup = intel_crtc_mode_fixup, @@ -5562,6 +5574,7 @@ static struct drm_crtc_helper_funcs intel_helper_funcs = { }; static const struct drm_crtc_funcs intel_crtc_funcs = { + .reset = intel_crtc_reset, .cursor_set = intel_crtc_cursor_set, .cursor_move = intel_crtc_cursor_move, .gamma_set = intel_crtc_gamma_set, @@ -5652,9 +5665,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base; dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base; - intel_crtc->cursor_addr = 0; - intel_crtc->dpms_mode = -1; - intel_crtc->active = true; /* force the pipe off on setup_init_config */ + intel_crtc_reset(&intel_crtc->base); if (HAS_PCH_SPLIT(dev)) { intel_helper_funcs.prepare = ironlake_crtc_prepare; -- cgit v1.2.1 From c3810c88788d505d4ffd786addd111b745e42161 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 25 Jan 2011 20:50:07 +0100 Subject: PM / Runtime: Don't enable interrupts while running in_interrupt This patch (as1445) fixes a bug in the runtime PM core left over from the addition of the no_callbacks flag. If this flag is set then it is possible for rpm_suspend() to be called in_interrupt, so when releasing spinlocks it's important not to re-enable interrupts. To avoid an unnecessary save-and-restore of the interrupt flag, the patch also inlines a pm_request_idle() call. This fixes Bugzilla #27482. (The offending code was added in 2.6.37, so it's not necessary to apply this to any earlier stable kernels.) Signed-off-by: Alan Stern Reported-by: tim blechmann CC: Signed-off-by: Rafael J. Wysocki --- drivers/base/power/runtime.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 656493a5e073..42615b419dfb 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -407,12 +407,15 @@ static int rpm_suspend(struct device *dev, int rpmflags) goto out; } + /* Maybe the parent is now able to suspend. */ if (parent && !parent->power.ignore_children && !dev->power.irq_safe) { - spin_unlock_irq(&dev->power.lock); + spin_unlock(&dev->power.lock); - pm_request_idle(parent); + spin_lock(&parent->power.lock); + rpm_idle(parent, RPM_ASYNC); + spin_unlock(&parent->power.lock); - spin_lock_irq(&dev->power.lock); + spin_lock(&dev->power.lock); } out: -- cgit v1.2.1 From 9c4cf6d94fb362c27a24df5223ed6e327eb7279a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 25 Jan 2011 17:42:29 +0800 Subject: rt2x00: add device id for windy31 usb device This patch adds the device id for the windy31 USB device to the rt73usb driver. Thanks to Ralf Flaxa for reporting this and providing testing and a sample device. Reported-by: Ralf Flaxa Tested-by: Ralf Flaxa Cc: stable Signed-off-by: Greg Kroah-Hartman Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt73usb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 0b4e8590cbb7..029be3c6c030 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2446,6 +2446,7 @@ static struct usb_device_id rt73usb_device_table[] = { { USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0812, 0x3101), USB_DEVICE_DATA(&rt73usb_ops) }, /* Qcom */ { USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) }, -- cgit v1.2.1 From ecb5646cb098d9d1961c4b1af7b776c73b7541ac Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 25 Jan 2011 14:12:12 +0000 Subject: intel_scu_ipc: fix signedness bug busy_loop() returns negative error code, thus change err variable from u32 to int to properly propagate correct error code. Also remove unneeded initialization for err and i variables. Signed-off-by: Axel Lin Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/platform/x86/intel_scu_ipc.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index 1752ef006d26..f374c5961b32 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -161,7 +161,7 @@ static int pwr_reg_rdwr(u16 *addr, u8 *data, u32 count, u32 op, u32 id) { int i, nc, bytes, d; u32 offset = 0; - u32 err = 0; + int err; u8 cbuf[IPC_WWBUF_SIZE] = { }; u32 *wbuf = (u32 *)&cbuf; @@ -404,7 +404,7 @@ EXPORT_SYMBOL(intel_scu_ipc_update_register); */ int intel_scu_ipc_simple_command(int cmd, int sub) { - u32 err = 0; + int err; mutex_lock(&ipclock); if (ipcdev.pdev == NULL) { @@ -434,8 +434,7 @@ EXPORT_SYMBOL(intel_scu_ipc_simple_command); int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen, u32 *out, int outlen) { - u32 err = 0; - int i = 0; + int i, err; mutex_lock(&ipclock); if (ipcdev.pdev == NULL) { -- cgit v1.2.1 From f5c66d70ac2a9016a7ad481bd37e39afd7dd7369 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 25 Jan 2011 14:33:36 +0000 Subject: intel_scu_ipcutils: Fix the license tag GPL V2 should be GPL v2 Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/platform/x86/intel_scu_ipcutil.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/platform/x86/intel_scu_ipcutil.c b/drivers/platform/x86/intel_scu_ipcutil.c index ba3231d0819e..b93a03259c16 100644 --- a/drivers/platform/x86/intel_scu_ipcutil.c +++ b/drivers/platform/x86/intel_scu_ipcutil.c @@ -128,6 +128,6 @@ static void __exit ipc_module_exit(void) module_init(ipc_module_init); module_exit(ipc_module_exit); -MODULE_LICENSE("GPL V2"); +MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("Utility driver for intel scu ipc"); MODULE_AUTHOR("Sreedhara "); -- cgit v1.2.1 From d8cc667be8fad9ad0bb3a95116be9f80a3b3efcf Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 25 Jan 2011 15:07:14 -0800 Subject: leds: leds-pwm: return proper error if pwm_request failed Return PTR_ERR(led_dat->pwm) instead of 0 if pwm_request failed Signed-off-by: Axel Lin Cc: Richard Purdie Cc: Luotao Fu Cc: Reviewed-by: Dmitry Torokhov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/leds-pwm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c index da3fa8dcdf5b..666daf77872e 100644 --- a/drivers/leds/leds-pwm.c +++ b/drivers/leds/leds-pwm.c @@ -69,6 +69,7 @@ static int led_pwm_probe(struct platform_device *pdev) led_dat->pwm = pwm_request(cur_led->pwm_id, cur_led->name); if (IS_ERR(led_dat->pwm)) { + ret = PTR_ERR(led_dat->pwm); dev_err(&pdev->dev, "unable to request PWM %d\n", cur_led->pwm_id); goto err; -- cgit v1.2.1 From 0766d20fdb9178b908f0268c16b464c11822c5c2 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 25 Jan 2011 15:07:15 -0800 Subject: langwell_gpio: modify EOI handling following change of kernel irq subsystem Latest kernel has many changes in IRQ subsystem and its interfaces, like adding "irq_eoi" for struct irq_chip, this patch is a follow up change for that. Also remove the unnecessary cast for a "void *". Signed-off-by: Feng Tang Cc: Alek Du Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/langwell_gpio.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/langwell_gpio.c b/drivers/gpio/langwell_gpio.c index d81cc748e77f..54d70a47afc1 100644 --- a/drivers/gpio/langwell_gpio.c +++ b/drivers/gpio/langwell_gpio.c @@ -187,7 +187,7 @@ MODULE_DEVICE_TABLE(pci, lnw_gpio_ids); static void lnw_irq_handler(unsigned irq, struct irq_desc *desc) { - struct lnw_gpio *lnw = (struct lnw_gpio *)get_irq_data(irq); + struct lnw_gpio *lnw = get_irq_data(irq); u32 base, gpio; void __iomem *gedr; u32 gedr_v; @@ -206,7 +206,12 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc) /* clear the edge detect status bit */ writel(gedr_v, gedr); } - desc->chip->eoi(irq); + + if (desc->chip->irq_eoi) + desc->chip->irq_eoi(irq_get_irq_data(irq)); + else + dev_warn(lnw->chip.dev, "missing EOI handler for irq %d\n", irq); + } static int __devinit lnw_gpio_probe(struct pci_dev *pdev, -- cgit v1.2.1 From cbeb4b7ad5346516d2ee726395eb5722b25a0a01 Mon Sep 17 00:00:00 2001 From: Alexander Gordeev Date: Tue, 25 Jan 2011 15:07:16 -0800 Subject: parport: make lockdep happy with waitlist_lock parport_unregister_device() should never be used when interrupts are enabled in hardware and irq handler is registered so there is no need to disable interrupts when using waitlist_lock. But there is no way to explain this subtle semantics to lockdep analyzer. So disable interrupts here too to simplify things. The price is negligible. Signed-off-by: Alexander Gordeev Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/parport/share.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/parport/share.c b/drivers/parport/share.c index a2d9d1e59260..a848e02e6be3 100644 --- a/drivers/parport/share.c +++ b/drivers/parport/share.c @@ -678,7 +678,7 @@ void parport_unregister_device(struct pardevice *dev) /* Make sure we haven't left any pointers around in the wait * list. */ - spin_lock (&port->waitlist_lock); + spin_lock_irq(&port->waitlist_lock); if (dev->waitprev || dev->waitnext || port->waithead == dev) { if (dev->waitprev) dev->waitprev->waitnext = dev->waitnext; @@ -689,7 +689,7 @@ void parport_unregister_device(struct pardevice *dev) else port->waittail = dev->waitprev; } - spin_unlock (&port->waitlist_lock); + spin_unlock_irq(&port->waitlist_lock); kfree(dev->state); kfree(dev); -- cgit v1.2.1 From a783ac4453405b579ab7732ba3c0efc07a4b7a61 Mon Sep 17 00:00:00 2001 From: Rodolfo Giometti Date: Tue, 25 Jan 2011 15:07:17 -0800 Subject: pps ktimer: remove noisy message Signed-off-by: Rodolfo Giometti Reported-by: Ingo Molnar Cc: Alexander Gordeev Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pps/clients/pps-ktimer.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pps/clients/pps-ktimer.c b/drivers/pps/clients/pps-ktimer.c index 2728469d3884..82583b0ff82d 100644 --- a/drivers/pps/clients/pps-ktimer.c +++ b/drivers/pps/clients/pps-ktimer.c @@ -46,8 +46,6 @@ static void pps_ktimer_event(unsigned long ptr) /* First of all we get the time stamp... */ pps_get_ts(&ts); - dev_info(pps->dev, "PPS event at %lu\n", jiffies); - pps_event(pps, &ts, PPS_CAPTUREASSERT, NULL); mod_timer(&ktimer, jiffies + HZ); -- cgit v1.2.1 From 4f542e3dd90a96ee0f8fcb8173cb4104f5f753e6 Mon Sep 17 00:00:00 2001 From: Alexander Gordeev Date: Tue, 25 Jan 2011 15:07:19 -0800 Subject: pps: claim parallel port exclusively Both pps_parport and pps_gen_parport are written in a way that they can't share a port with any other driver. This can result in locking up the process that loads modules or even the whole kernel if the modules are compiled in. Use PARPORT_FLAG_EXCL to indicate this. Signed-off-by: Alexander Gordeev Cc: Alexander Gordeev Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pps/clients/pps_parport.c | 2 +- drivers/pps/generators/pps_gen_parport.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pps/clients/pps_parport.c b/drivers/pps/clients/pps_parport.c index 32221efd9ca9..c571d6dd8f61 100644 --- a/drivers/pps/clients/pps_parport.c +++ b/drivers/pps/clients/pps_parport.c @@ -163,7 +163,7 @@ static void parport_attach(struct parport *port) } device->pardev = parport_register_device(port, KBUILD_MODNAME, - NULL, NULL, parport_irq, 0, device); + NULL, NULL, parport_irq, PARPORT_FLAG_EXCL, device); if (!device->pardev) { pr_err("couldn't register with %s\n", port->name); goto err_free; diff --git a/drivers/pps/generators/pps_gen_parport.c b/drivers/pps/generators/pps_gen_parport.c index 5c32f8dacf56..b93af3ebb5ba 100644 --- a/drivers/pps/generators/pps_gen_parport.c +++ b/drivers/pps/generators/pps_gen_parport.c @@ -198,7 +198,7 @@ static void parport_attach(struct parport *port) } device.pardev = parport_register_device(port, KBUILD_MODNAME, - NULL, NULL, NULL, 0, &device); + NULL, NULL, NULL, PARPORT_FLAG_EXCL, &device); if (!device.pardev) { pr_err("couldn't register with %s\n", port->name); return; -- cgit v1.2.1 From 1817dc0370873caff77b924b53ae489edaf9b1e2 Mon Sep 17 00:00:00 2001 From: "Voss, Nikolaus" Date: Tue, 25 Jan 2011 15:07:29 -0800 Subject: drivers/clocksource/tcb_clksrc.c: fix init sequence setup_irq() was called before clockevents_register_device() which is needed by the irq handler. Bug was reproducible by restarting the kernel using kexec (reliable crash). Signed-off-by: Nikolaus Voss Cc: David Brownell Cc: Haavard Skinnemoen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/clocksource/tcb_clksrc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c index 01b886e68822..79c47e88d5d1 100644 --- a/drivers/clocksource/tcb_clksrc.c +++ b/drivers/clocksource/tcb_clksrc.c @@ -196,9 +196,9 @@ static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx) clkevt.clkevt.min_delta_ns = clockevent_delta2ns(1, &clkevt.clkevt) + 1; clkevt.clkevt.cpumask = cpumask_of(0); - setup_irq(irq, &tc_irqaction); - clockevents_register_device(&clkevt.clkevt); + + setup_irq(irq, &tc_irqaction); } #else /* !CONFIG_GENERIC_CLOCKEVENTS */ -- cgit v1.2.1 From ac751efa6a0d70f2c9daef5c7e3a92270f5c2dff Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Tue, 25 Jan 2011 15:07:35 -0800 Subject: console: rename acquire/release_console_sem() to console_lock/unlock() The -rt patches change the console_semaphore to console_mutex. As a result, a quite large chunk of the patches changes all acquire/release_console_sem() to acquire/release_console_mutex() This commit makes things use more neutral function names which dont make implications about the underlying lock. The only real change is the return value of console_trylock which is inverted from try_acquire_console_sem() This patch also paves the way to switching console_sem from a semaphore to a mutex. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make console_trylock return 1 on success, per Geert] Signed-off-by: Torben Hohn Cc: Thomas Gleixner Cc: Greg KH Cc: Ingo Molnar Cc: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/bfin_jtag_comm.c | 8 +-- drivers/gpu/drm/nouveau/nouveau_drv.c | 8 +-- drivers/gpu/drm/radeon/radeon_device.c | 10 +-- drivers/staging/msm/msm_fb.c | 8 +-- drivers/staging/olpc_dcon/olpc_dcon.c | 10 +-- drivers/staging/sm7xx/smtcfb.c | 8 +-- drivers/tty/serial/sb1250-duart.c | 2 +- drivers/tty/tty_io.c | 4 +- drivers/tty/vt/selection.c | 4 +- drivers/tty/vt/vc_screen.c | 16 ++--- drivers/tty/vt/vt.c | 124 ++++++++++++++++----------------- drivers/tty/vt/vt_ioctl.c | 60 ++++++++-------- drivers/video/arkfb.c | 12 ++-- drivers/video/aty/aty128fb.c | 12 ++-- drivers/video/aty/atyfb_base.c | 10 +-- drivers/video/aty/radeon_pm.c | 10 +-- drivers/video/chipsfb.c | 8 +-- drivers/video/console/fbcon.c | 42 +++++------ drivers/video/da8xx-fb.c | 8 +-- drivers/video/fbmem.c | 12 ++-- drivers/video/fbsysfs.c | 20 +++--- drivers/video/geode/gxfb_core.c | 8 +-- drivers/video/geode/lxfb_core.c | 8 +-- drivers/video/i810/i810_main.c | 8 +-- drivers/video/jz4740_fb.c | 8 +-- drivers/video/mx3fb.c | 8 +-- drivers/video/nvidia/nvidia.c | 8 +-- drivers/video/ps3fb.c | 16 ++--- drivers/video/s3fb.c | 16 ++--- drivers/video/savage/savagefb_driver.c | 8 +-- drivers/video/sh_mobile_hdmi.c | 8 +-- drivers/video/sh_mobile_lcdcfb.c | 4 +- drivers/video/sm501fb.c | 8 +-- drivers/video/tmiofb.c | 10 +-- drivers/video/via/viafbdev.c | 8 +-- drivers/video/vt8623fb.c | 12 ++-- drivers/video/xen-fbfront.c | 4 +- 37 files changed, 269 insertions(+), 269 deletions(-) (limited to 'drivers') diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/char/bfin_jtag_comm.c index e397df3ad98e..16402445f2b2 100644 --- a/drivers/char/bfin_jtag_comm.c +++ b/drivers/char/bfin_jtag_comm.c @@ -183,16 +183,16 @@ bfin_jc_circ_write(const unsigned char *buf, int count) } #ifndef CONFIG_BFIN_JTAG_COMM_CONSOLE -# define acquire_console_sem() -# define release_console_sem() +# define console_lock() +# define console_unlock() #endif static int bfin_jc_write(struct tty_struct *tty, const unsigned char *buf, int count) { int i; - acquire_console_sem(); + console_lock(); i = bfin_jc_circ_write(buf, count); - release_console_sem(); + console_unlock(); wake_up_process(bfin_jc_kthread); return i; } diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c index 13bb672a16f4..f658a04eecf9 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.c +++ b/drivers/gpu/drm/nouveau/nouveau_drv.c @@ -234,9 +234,9 @@ nouveau_pci_suspend(struct pci_dev *pdev, pm_message_t pm_state) pci_set_power_state(pdev, PCI_D3hot); } - acquire_console_sem(); + console_lock(); nouveau_fbcon_set_suspend(dev, 1); - release_console_sem(); + console_unlock(); nouveau_fbcon_restore_accel(dev); return 0; @@ -359,9 +359,9 @@ nouveau_pci_resume(struct pci_dev *pdev) nv_crtc->lut.depth = 0; } - acquire_console_sem(); + console_lock(); nouveau_fbcon_set_suspend(dev, 0); - release_console_sem(); + console_unlock(); nouveau_fbcon_zfill_all(dev); diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 26091d602b84..0d478932b1a9 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -891,9 +891,9 @@ int radeon_suspend_kms(struct drm_device *dev, pm_message_t state) pci_disable_device(dev->pdev); pci_set_power_state(dev->pdev, PCI_D3hot); } - acquire_console_sem(); + console_lock(); radeon_fbdev_set_suspend(rdev, 1); - release_console_sem(); + console_unlock(); return 0; } @@ -905,11 +905,11 @@ int radeon_resume_kms(struct drm_device *dev) if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) return 0; - acquire_console_sem(); + console_lock(); pci_set_power_state(dev->pdev, PCI_D0); pci_restore_state(dev->pdev); if (pci_enable_device(dev->pdev)) { - release_console_sem(); + console_unlock(); return -1; } pci_set_master(dev->pdev); @@ -920,7 +920,7 @@ int radeon_resume_kms(struct drm_device *dev) radeon_restore_bios_scratch_regs(rdev); radeon_fbdev_set_suspend(rdev, 0); - release_console_sem(); + console_unlock(); /* reset hpd state */ radeon_hpd_init(rdev); diff --git a/drivers/staging/msm/msm_fb.c b/drivers/staging/msm/msm_fb.c index 23fa049b51f2..a2f29d464051 100644 --- a/drivers/staging/msm/msm_fb.c +++ b/drivers/staging/msm/msm_fb.c @@ -347,7 +347,7 @@ static int msm_fb_suspend(struct platform_device *pdev, pm_message_t state) if ((!mfd) || (mfd->key != MFD_KEY)) return 0; - acquire_console_sem(); + console_lock(); fb_set_suspend(mfd->fbi, 1); ret = msm_fb_suspend_sub(mfd); @@ -358,7 +358,7 @@ static int msm_fb_suspend(struct platform_device *pdev, pm_message_t state) pdev->dev.power.power_state = state; } - release_console_sem(); + console_unlock(); return ret; } #else @@ -431,11 +431,11 @@ static int msm_fb_resume(struct platform_device *pdev) if ((!mfd) || (mfd->key != MFD_KEY)) return 0; - acquire_console_sem(); + console_lock(); ret = msm_fb_resume_sub(mfd); pdev->dev.power.power_state = PMSG_ON; fb_set_suspend(mfd->fbi, 1); - release_console_sem(); + console_unlock(); return ret; } diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c index 9f26dc9408bb..56a283d1a74d 100644 --- a/drivers/staging/olpc_dcon/olpc_dcon.c +++ b/drivers/staging/olpc_dcon/olpc_dcon.c @@ -373,17 +373,17 @@ static void dcon_source_switch(struct work_struct *work) * * For now, we just hope.. */ - acquire_console_sem(); + console_lock(); ignore_fb_events = 1; if (fb_blank(fbinfo, FB_BLANK_UNBLANK)) { ignore_fb_events = 0; - release_console_sem(); + console_unlock(); printk(KERN_ERR "olpc-dcon: Failed to enter CPU mode\n"); dcon_pending = DCON_SOURCE_DCON; return; } ignore_fb_events = 0; - release_console_sem(); + console_unlock(); /* And turn off the DCON */ pdata->set_dconload(1); @@ -435,12 +435,12 @@ static void dcon_source_switch(struct work_struct *work) } } - acquire_console_sem(); + console_lock(); ignore_fb_events = 1; if (fb_blank(fbinfo, FB_BLANK_POWERDOWN)) printk(KERN_ERR "olpc-dcon: couldn't blank fb!\n"); ignore_fb_events = 0; - release_console_sem(); + console_unlock(); printk(KERN_INFO "olpc-dcon: The DCON has control\n"); break; diff --git a/drivers/staging/sm7xx/smtcfb.c b/drivers/staging/sm7xx/smtcfb.c index 0bc113c44d39..d007e4a12c14 100644 --- a/drivers/staging/sm7xx/smtcfb.c +++ b/drivers/staging/sm7xx/smtcfb.c @@ -1044,9 +1044,9 @@ static int __maybe_unused smtcfb_suspend(struct pci_dev *pdev, pm_message_t msg) /* when doing suspend, call fb apis and pci apis */ if (msg.event == PM_EVENT_SUSPEND) { - acquire_console_sem(); + console_lock(); fb_set_suspend(&sfb->fb, 1); - release_console_sem(); + console_unlock(); retv = pci_save_state(pdev); pci_disable_device(pdev); retv = pci_choose_state(pdev, msg); @@ -1105,9 +1105,9 @@ static int __maybe_unused smtcfb_resume(struct pci_dev *pdev) smtcfb_setmode(sfb); - acquire_console_sem(); + console_lock(); fb_set_suspend(&sfb->fb, 0); - release_console_sem(); + console_unlock(); return 0; } diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c index a2f2b3254499..602d9845c52f 100644 --- a/drivers/tty/serial/sb1250-duart.c +++ b/drivers/tty/serial/sb1250-duart.c @@ -829,7 +829,7 @@ static void __init sbd_probe_duarts(void) #ifdef CONFIG_SERIAL_SB1250_DUART_CONSOLE /* * Serial console stuff. Very basic, polling driver for doing serial - * console output. The console_sem is held by the caller, so we + * console output. The console_lock is held by the caller, so we * shouldn't be interrupted for more console activity. */ static void sbd_console_putchar(struct uart_port *uport, int ch) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 464d09d97873..6158eae0f64a 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -3256,7 +3256,7 @@ static ssize_t show_cons_active(struct device *dev, struct console *c; ssize_t count = 0; - acquire_console_sem(); + console_lock(); for (c = console_drivers; c; c = c->next) { if (!c->device) continue; @@ -3271,7 +3271,7 @@ static ssize_t show_cons_active(struct device *dev, while (i--) count += sprintf(buf + count, "%s%d%c", cs[i]->name, cs[i]->index, i ? ' ':'\n'); - release_console_sem(); + console_unlock(); return count; } diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c index ebae344ce910..c956ed6c83a3 100644 --- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -316,9 +316,9 @@ int paste_selection(struct tty_struct *tty) /* always called with BTM from vt_ioctl */ WARN_ON(!tty_locked()); - acquire_console_sem(); + console_lock(); poke_blanked_console(); - release_console_sem(); + console_unlock(); ld = tty_ldisc_ref(tty); if (!ld) { diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c index eab3a1ff99e4..a672ed192d33 100644 --- a/drivers/tty/vt/vc_screen.c +++ b/drivers/tty/vt/vc_screen.c @@ -202,7 +202,7 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) /* Select the proper current console and verify * sanity of the situation under the console lock. */ - acquire_console_sem(); + console_lock(); attr = (currcons & 128); currcons = (currcons & 127); @@ -336,9 +336,9 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) * the pagefault handling code may want to call printk(). */ - release_console_sem(); + console_unlock(); ret = copy_to_user(buf, con_buf_start, orig_count); - acquire_console_sem(); + console_lock(); if (ret) { read += (orig_count - ret); @@ -354,7 +354,7 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) if (read) ret = read; unlock_out: - release_console_sem(); + console_unlock(); mutex_unlock(&con_buf_mtx); return ret; } @@ -379,7 +379,7 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) /* Select the proper current console and verify * sanity of the situation under the console lock. */ - acquire_console_sem(); + console_lock(); attr = (currcons & 128); currcons = (currcons & 127); @@ -414,9 +414,9 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) /* Temporarily drop the console lock so that we can read * in the write data from userspace safely. */ - release_console_sem(); + console_unlock(); ret = copy_from_user(con_buf, buf, this_round); - acquire_console_sem(); + console_lock(); if (ret) { this_round -= ret; @@ -542,7 +542,7 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) vcs_scr_updated(vc); unlock_out: - release_console_sem(); + console_unlock(); mutex_unlock(&con_buf_mtx); diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 76407eca9ab0..b230bd3f056f 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -1003,9 +1003,9 @@ static int vt_resize(struct tty_struct *tty, struct winsize *ws) struct vc_data *vc = tty->driver_data; int ret; - acquire_console_sem(); + console_lock(); ret = vc_do_resize(tty, vc, ws->ws_col, ws->ws_row); - release_console_sem(); + console_unlock(); return ret; } @@ -1271,7 +1271,7 @@ static void default_attr(struct vc_data *vc) vc->vc_color = vc->vc_def_color; } -/* console_sem is held */ +/* console_lock is held */ static void csi_m(struct vc_data *vc) { int i; @@ -1415,7 +1415,7 @@ int mouse_reporting(void) return vc_cons[fg_console].d->vc_report_mouse; } -/* console_sem is held */ +/* console_lock is held */ static void set_mode(struct vc_data *vc, int on_off) { int i; @@ -1485,7 +1485,7 @@ static void set_mode(struct vc_data *vc, int on_off) } } -/* console_sem is held */ +/* console_lock is held */ static void setterm_command(struct vc_data *vc) { switch(vc->vc_par[0]) { @@ -1545,7 +1545,7 @@ static void setterm_command(struct vc_data *vc) } } -/* console_sem is held */ +/* console_lock is held */ static void csi_at(struct vc_data *vc, unsigned int nr) { if (nr > vc->vc_cols - vc->vc_x) @@ -1555,7 +1555,7 @@ static void csi_at(struct vc_data *vc, unsigned int nr) insert_char(vc, nr); } -/* console_sem is held */ +/* console_lock is held */ static void csi_L(struct vc_data *vc, unsigned int nr) { if (nr > vc->vc_rows - vc->vc_y) @@ -1566,7 +1566,7 @@ static void csi_L(struct vc_data *vc, unsigned int nr) vc->vc_need_wrap = 0; } -/* console_sem is held */ +/* console_lock is held */ static void csi_P(struct vc_data *vc, unsigned int nr) { if (nr > vc->vc_cols - vc->vc_x) @@ -1576,7 +1576,7 @@ static void csi_P(struct vc_data *vc, unsigned int nr) delete_char(vc, nr); } -/* console_sem is held */ +/* console_lock is held */ static void csi_M(struct vc_data *vc, unsigned int nr) { if (nr > vc->vc_rows - vc->vc_y) @@ -1587,7 +1587,7 @@ static void csi_M(struct vc_data *vc, unsigned int nr) vc->vc_need_wrap = 0; } -/* console_sem is held (except via vc_init->reset_terminal */ +/* console_lock is held (except via vc_init->reset_terminal */ static void save_cur(struct vc_data *vc) { vc->vc_saved_x = vc->vc_x; @@ -1603,7 +1603,7 @@ static void save_cur(struct vc_data *vc) vc->vc_saved_G1 = vc->vc_G1_charset; } -/* console_sem is held */ +/* console_lock is held */ static void restore_cur(struct vc_data *vc) { gotoxy(vc, vc->vc_saved_x, vc->vc_saved_y); @@ -1625,7 +1625,7 @@ enum { ESnormal, ESesc, ESsquare, ESgetpars, ESgotpars, ESfunckey, EShash, ESsetG0, ESsetG1, ESpercent, ESignore, ESnonstd, ESpalette }; -/* console_sem is held (except via vc_init()) */ +/* console_lock is held (except via vc_init()) */ static void reset_terminal(struct vc_data *vc, int do_clear) { vc->vc_top = 0; @@ -1685,7 +1685,7 @@ static void reset_terminal(struct vc_data *vc, int do_clear) csi_J(vc, 2); } -/* console_sem is held */ +/* console_lock is held */ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) { /* @@ -2119,7 +2119,7 @@ static int is_double_width(uint32_t ucs) return bisearch(ucs, double_width, ARRAY_SIZE(double_width) - 1); } -/* acquires console_sem */ +/* acquires console_lock */ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int count) { #ifdef VT_BUF_VRAM_ONLY @@ -2147,11 +2147,11 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co might_sleep(); - acquire_console_sem(); + console_lock(); vc = tty->driver_data; if (vc == NULL) { printk(KERN_ERR "vt: argh, driver_data is NULL !\n"); - release_console_sem(); + console_unlock(); return 0; } @@ -2159,7 +2159,7 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co if (!vc_cons_allocated(currcons)) { /* could this happen? */ printk_once("con_write: tty %d not allocated\n", currcons+1); - release_console_sem(); + console_unlock(); return 0; } @@ -2375,7 +2375,7 @@ rescan_last_byte: } FLUSH console_conditional_schedule(); - release_console_sem(); + console_unlock(); notify_update(vc); return n; #undef FLUSH @@ -2388,11 +2388,11 @@ rescan_last_byte: * us to do the switches asynchronously (needed when we want * to switch due to a keyboard interrupt). Synchronization * with other console code and prevention of re-entrancy is - * ensured with console_sem. + * ensured with console_lock. */ static void console_callback(struct work_struct *ignored) { - acquire_console_sem(); + console_lock(); if (want_console >= 0) { if (want_console != fg_console && @@ -2422,7 +2422,7 @@ static void console_callback(struct work_struct *ignored) } notify_update(vc_cons[fg_console].d); - release_console_sem(); + console_unlock(); } int set_console(int nr) @@ -2603,7 +2603,7 @@ static struct console vt_console_driver = { */ /* - * Generally a bit racy with respect to console_sem(). + * Generally a bit racy with respect to console_lock();. * * There are some functions which don't need it. * @@ -2629,17 +2629,17 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) switch (type) { case TIOCL_SETSEL: - acquire_console_sem(); + console_lock(); ret = set_selection((struct tiocl_selection __user *)(p+1), tty); - release_console_sem(); + console_unlock(); break; case TIOCL_PASTESEL: ret = paste_selection(tty); break; case TIOCL_UNBLANKSCREEN: - acquire_console_sem(); + console_lock(); unblank_screen(); - release_console_sem(); + console_unlock(); break; case TIOCL_SELLOADLUT: ret = sel_loadlut(p); @@ -2688,10 +2688,10 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) } break; case TIOCL_BLANKSCREEN: /* until explicitly unblanked, not only poked */ - acquire_console_sem(); + console_lock(); ignore_poke = 1; do_blank_screen(0); - release_console_sem(); + console_unlock(); break; case TIOCL_BLANKEDSCREEN: ret = console_blanked; @@ -2790,11 +2790,11 @@ static void con_flush_chars(struct tty_struct *tty) return; /* if we race with con_close(), vt may be null */ - acquire_console_sem(); + console_lock(); vc = tty->driver_data; if (vc) set_cursor(vc); - release_console_sem(); + console_unlock(); } /* @@ -2805,7 +2805,7 @@ static int con_open(struct tty_struct *tty, struct file *filp) unsigned int currcons = tty->index; int ret = 0; - acquire_console_sem(); + console_lock(); if (tty->driver_data == NULL) { ret = vc_allocate(currcons); if (ret == 0) { @@ -2813,7 +2813,7 @@ static int con_open(struct tty_struct *tty, struct file *filp) /* Still being freed */ if (vc->port.tty) { - release_console_sem(); + console_unlock(); return -ERESTARTSYS; } tty->driver_data = vc; @@ -2827,11 +2827,11 @@ static int con_open(struct tty_struct *tty, struct file *filp) tty->termios->c_iflag |= IUTF8; else tty->termios->c_iflag &= ~IUTF8; - release_console_sem(); + console_unlock(); return ret; } } - release_console_sem(); + console_unlock(); return ret; } @@ -2844,9 +2844,9 @@ static void con_shutdown(struct tty_struct *tty) { struct vc_data *vc = tty->driver_data; BUG_ON(vc == NULL); - acquire_console_sem(); + console_lock(); vc->port.tty = NULL; - release_console_sem(); + console_unlock(); tty_shutdown(tty); } @@ -2893,13 +2893,13 @@ static int __init con_init(void) struct vc_data *vc; unsigned int currcons = 0, i; - acquire_console_sem(); + console_lock(); if (conswitchp) display_desc = conswitchp->con_startup(); if (!display_desc) { fg_console = 0; - release_console_sem(); + console_unlock(); return 0; } @@ -2946,7 +2946,7 @@ static int __init con_init(void) printable = 1; printk("\n"); - release_console_sem(); + console_unlock(); #ifdef CONFIG_VT_CONSOLE register_console(&vt_console_driver); @@ -3037,7 +3037,7 @@ static int bind_con_driver(const struct consw *csw, int first, int last, if (!try_module_get(owner)) return -ENODEV; - acquire_console_sem(); + console_lock(); /* check if driver is registered */ for (i = 0; i < MAX_NR_CON_DRIVER; i++) { @@ -3122,7 +3122,7 @@ static int bind_con_driver(const struct consw *csw, int first, int last, retval = 0; err: - release_console_sem(); + console_unlock(); module_put(owner); return retval; }; @@ -3171,7 +3171,7 @@ int unbind_con_driver(const struct consw *csw, int first, int last, int deflt) if (!try_module_get(owner)) return -ENODEV; - acquire_console_sem(); + console_lock(); /* check if driver is registered and if it is unbindable */ for (i = 0; i < MAX_NR_CON_DRIVER; i++) { @@ -3185,7 +3185,7 @@ int unbind_con_driver(const struct consw *csw, int first, int last, int deflt) } if (retval) { - release_console_sem(); + console_unlock(); goto err; } @@ -3204,12 +3204,12 @@ int unbind_con_driver(const struct consw *csw, int first, int last, int deflt) } if (retval) { - release_console_sem(); + console_unlock(); goto err; } if (!con_is_bound(csw)) { - release_console_sem(); + console_unlock(); goto err; } @@ -3238,7 +3238,7 @@ int unbind_con_driver(const struct consw *csw, int first, int last, int deflt) if (!con_is_bound(csw)) con_driver->flag &= ~CON_DRIVER_FLAG_INIT; - release_console_sem(); + console_unlock(); /* ignore return value, binding should not fail */ bind_con_driver(defcsw, first, last, deflt); err: @@ -3538,7 +3538,7 @@ int register_con_driver(const struct consw *csw, int first, int last) if (!try_module_get(owner)) return -ENODEV; - acquire_console_sem(); + console_lock(); for (i = 0; i < MAX_NR_CON_DRIVER; i++) { con_driver = ®istered_con_driver[i]; @@ -3592,7 +3592,7 @@ int register_con_driver(const struct consw *csw, int first, int last) } err: - release_console_sem(); + console_unlock(); module_put(owner); return retval; } @@ -3613,7 +3613,7 @@ int unregister_con_driver(const struct consw *csw) { int i, retval = -ENODEV; - acquire_console_sem(); + console_lock(); /* cannot unregister a bound driver */ if (con_is_bound(csw)) @@ -3639,7 +3639,7 @@ int unregister_con_driver(const struct consw *csw) } } err: - release_console_sem(); + console_unlock(); return retval; } EXPORT_SYMBOL(unregister_con_driver); @@ -3934,9 +3934,9 @@ int con_set_cmap(unsigned char __user *arg) { int rc; - acquire_console_sem(); + console_lock(); rc = set_get_cmap (arg,1); - release_console_sem(); + console_unlock(); return rc; } @@ -3945,9 +3945,9 @@ int con_get_cmap(unsigned char __user *arg) { int rc; - acquire_console_sem(); + console_lock(); rc = set_get_cmap (arg,0); - release_console_sem(); + console_unlock(); return rc; } @@ -3994,12 +3994,12 @@ static int con_font_get(struct vc_data *vc, struct console_font_op *op) } else font.data = NULL; - acquire_console_sem(); + console_lock(); if (vc->vc_sw->con_font_get) rc = vc->vc_sw->con_font_get(vc, &font); else rc = -ENOSYS; - release_console_sem(); + console_unlock(); if (rc) goto out; @@ -4076,12 +4076,12 @@ static int con_font_set(struct vc_data *vc, struct console_font_op *op) font.data = memdup_user(op->data, size); if (IS_ERR(font.data)) return PTR_ERR(font.data); - acquire_console_sem(); + console_lock(); if (vc->vc_sw->con_font_set) rc = vc->vc_sw->con_font_set(vc, &font, op->flags); else rc = -ENOSYS; - release_console_sem(); + console_unlock(); kfree(font.data); return rc; } @@ -4103,12 +4103,12 @@ static int con_font_default(struct vc_data *vc, struct console_font_op *op) else name[MAX_FONT_NAME - 1] = 0; - acquire_console_sem(); + console_lock(); if (vc->vc_sw->con_font_default) rc = vc->vc_sw->con_font_default(vc, &font, s); else rc = -ENOSYS; - release_console_sem(); + console_unlock(); if (!rc) { op->width = font.width; op->height = font.height; @@ -4124,7 +4124,7 @@ static int con_font_copy(struct vc_data *vc, struct console_font_op *op) if (vc->vc_mode != KD_TEXT) return -EINVAL; - acquire_console_sem(); + console_lock(); if (!vc->vc_sw->con_font_copy) rc = -ENOSYS; else if (con < 0 || !vc_cons_allocated(con)) @@ -4133,7 +4133,7 @@ static int con_font_copy(struct vc_data *vc, struct console_font_op *op) rc = 0; else rc = vc->vc_sw->con_font_copy(vc, con); - release_console_sem(); + console_unlock(); return rc; } diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 6b68a0fb4611..1235ebda6e1c 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -649,12 +649,12 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, /* * explicitly blank/unblank the screen if switching modes */ - acquire_console_sem(); + console_lock(); if (arg == KD_TEXT) do_unblank_screen(1); else do_blank_screen(1); - release_console_sem(); + console_unlock(); break; case KDGETMODE: @@ -893,7 +893,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, ret = -EINVAL; goto out; } - acquire_console_sem(); + console_lock(); vc->vt_mode = tmp; /* the frsig is ignored, so we set it to 0 */ vc->vt_mode.frsig = 0; @@ -901,7 +901,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, vc->vt_pid = get_pid(task_pid(current)); /* no switch is required -- saw@shade.msu.ru */ vc->vt_newvt = -1; - release_console_sem(); + console_unlock(); break; } @@ -910,9 +910,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, struct vt_mode tmp; int rc; - acquire_console_sem(); + console_lock(); memcpy(&tmp, &vc->vt_mode, sizeof(struct vt_mode)); - release_console_sem(); + console_unlock(); rc = copy_to_user(up, &tmp, sizeof(struct vt_mode)); if (rc) @@ -965,9 +965,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, ret = -ENXIO; else { arg--; - acquire_console_sem(); + console_lock(); ret = vc_allocate(arg); - release_console_sem(); + console_unlock(); if (ret) break; set_console(arg); @@ -990,7 +990,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, ret = -ENXIO; else { vsa.console--; - acquire_console_sem(); + console_lock(); ret = vc_allocate(vsa.console); if (ret == 0) { struct vc_data *nvc; @@ -1003,7 +1003,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, put_pid(nvc->vt_pid); nvc->vt_pid = get_pid(task_pid(current)); } - release_console_sem(); + console_unlock(); if (ret) break; /* Commence switch and lock */ @@ -1044,7 +1044,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, /* * Switching-from response */ - acquire_console_sem(); + console_lock(); if (vc->vt_newvt >= 0) { if (arg == 0) /* @@ -1063,7 +1063,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, vc->vt_newvt = -1; ret = vc_allocate(newvt); if (ret) { - release_console_sem(); + console_unlock(); break; } /* @@ -1083,7 +1083,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, if (arg != VT_ACKACQ) ret = -EINVAL; } - release_console_sem(); + console_unlock(); break; /* @@ -1096,20 +1096,20 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, } if (arg == 0) { /* deallocate all unused consoles, but leave 0 */ - acquire_console_sem(); + console_lock(); for (i=1; iv_cols)) ret = -EFAULT; else { - acquire_console_sem(); + console_lock(); for (i = 0; i < MAX_NR_CONSOLES; i++) { vc = vc_cons[i].d; @@ -1135,7 +1135,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, vc_resize(vc_cons[i].d, cc, ll); } } - release_console_sem(); + console_unlock(); } break; } @@ -1187,14 +1187,14 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, for (i = 0; i < MAX_NR_CONSOLES; i++) { if (!vc_cons[i].d) continue; - acquire_console_sem(); + console_lock(); if (vlin) vc_cons[i].d->vc_scan_lines = vlin; if (clin) vc_cons[i].d->vc_font.height = clin; vc_cons[i].d->vc_resize_user = 1; vc_resize(vc_cons[i].d, cc, ll); - release_console_sem(); + console_unlock(); } break; } @@ -1367,7 +1367,7 @@ void vc_SAK(struct work_struct *work) struct vc_data *vc; struct tty_struct *tty; - acquire_console_sem(); + console_lock(); vc = vc_con->d; if (vc) { tty = vc->port.tty; @@ -1379,7 +1379,7 @@ void vc_SAK(struct work_struct *work) __do_SAK(tty); reset_vc(vc); } - release_console_sem(); + console_unlock(); } #ifdef CONFIG_COMPAT @@ -1737,10 +1737,10 @@ int vt_move_to_console(unsigned int vt, int alloc) { int prev; - acquire_console_sem(); + console_lock(); /* Graphics mode - up to X */ if (disable_vt_switch) { - release_console_sem(); + console_unlock(); return 0; } prev = fg_console; @@ -1748,7 +1748,7 @@ int vt_move_to_console(unsigned int vt, int alloc) if (alloc && vc_allocate(vt)) { /* we can't have a free VC for now. Too bad, * we don't want to mess the screen for now. */ - release_console_sem(); + console_unlock(); return -ENOSPC; } @@ -1758,10 +1758,10 @@ int vt_move_to_console(unsigned int vt, int alloc) * Let the calling function know so it can decide * what to do. */ - release_console_sem(); + console_unlock(); return -EIO; } - release_console_sem(); + console_unlock(); tty_lock(); if (vt_waitactive(vt + 1)) { pr_debug("Suspend: Can't switch VCs."); @@ -1781,8 +1781,8 @@ int vt_move_to_console(unsigned int vt, int alloc) */ void pm_set_vt_switch(int do_switch) { - acquire_console_sem(); + console_lock(); disable_vt_switch = !do_switch; - release_console_sem(); + console_unlock(); } EXPORT_SYMBOL(pm_set_vt_switch); diff --git a/drivers/video/arkfb.c b/drivers/video/arkfb.c index d583bea608fd..391ac939f011 100644 --- a/drivers/video/arkfb.c +++ b/drivers/video/arkfb.c @@ -23,7 +23,7 @@ #include #include #include -#include /* Why should fb driver call console functions? because acquire_console_sem() */ +#include /* Why should fb driver call console functions? because console_lock() */ #include