From 280ceaed79f18db930c0cc8bb21f6493490bf29c Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 19 Sep 2019 10:23:08 +0200 Subject: usbnet: sanity checking of packet sizes and device mtu After a reset packet sizes and device mtu can change and need to be reevaluated to calculate queue sizes. Malicious devices can set this to zero and we divide by it. Introduce sanity checking. Reported-and-tested-by: syzbot+6102c120be558c885f04@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 58952a79b05f..e44849499b89 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -339,6 +339,8 @@ void usbnet_update_max_qlen(struct usbnet *dev) { enum usb_device_speed speed = dev->udev->speed; + if (!dev->rx_urb_size || !dev->hard_mtu) + goto insanity; switch (speed) { case USB_SPEED_HIGH: dev->rx_qlen = MAX_QUEUE_MEMORY / dev->rx_urb_size; @@ -355,6 +357,7 @@ void usbnet_update_max_qlen(struct usbnet *dev) dev->tx_qlen = 5 * MAX_QUEUE_MEMORY / dev->hard_mtu; break; default: +insanity: dev->rx_qlen = dev->tx_qlen = 4; } } -- cgit v1.2.1 From 2d88b2cf2f002417cd7436f0fd34716e8c288fb1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 18 Sep 2019 16:49:03 +0300 Subject: iwlwifi: mvm: fix build w/o CONFIG_THERMAL Without CONFIG_THERMAL, the driver fails to link as it calls iwl_mvm_send_temp_report_ths_cmd() unconditionally. Fix this by making that function available, but do almost nothing but send the empty firmware command to enable CT-kill reporting. While at it, also fix that function itself to not error out when the thermal zone hasn't been initialized, but instead just send the empty firmware command in this case as well. Fixes: 242d9c8b9a93 ("iwlwifi: mvm: use FW thermal monitoring regardless of CONFIG_THERMAL") Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo --- drivers/net/wireless/intel/iwlwifi/mvm/tt.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c index 32a708301cfc..f0c539b37ea7 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c @@ -555,16 +555,19 @@ static int compare_temps(const void *a, const void *b) return ((s16)le16_to_cpu(*(__le16 *)a) - (s16)le16_to_cpu(*(__le16 *)b)); } +#endif int iwl_mvm_send_temp_report_ths_cmd(struct iwl_mvm *mvm) { struct temp_report_ths_cmd cmd = {0}; - int ret, i, j, idx = 0; + int ret; +#ifdef CONFIG_THERMAL + int i, j, idx = 0; lockdep_assert_held(&mvm->mutex); if (!mvm->tz_device.tzone) - return -EINVAL; + goto send; /* The driver holds array of temperature trips that are unsorted * and uncompressed, the FW should get it compressed and sorted @@ -597,6 +600,7 @@ int iwl_mvm_send_temp_report_ths_cmd(struct iwl_mvm *mvm) } send: +#endif ret = iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(PHY_OPS_GROUP, TEMP_REPORTING_THRESHOLDS_CMD), 0, sizeof(cmd), &cmd); @@ -607,6 +611,7 @@ send: return ret; } +#ifdef CONFIG_THERMAL static int iwl_mvm_tzone_get_temp(struct thermal_zone_device *device, int *temperature) { -- cgit v1.2.1 From b47bea2b5c3bf17270defe8529774dad114bcee5 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Tue, 17 Sep 2019 16:26:16 -0700 Subject: ionic: Remove unnecessary ternary operator in ionic_debugfs_add_ident clang warns: ../drivers/net/ethernet/pensando/ionic/ionic_debugfs.c:60:37: warning: expression result unused [-Wunused-value] ionic, &identity_fops) ? 0 : -EOPNOTSUPP; ^~~~~~~~~~~ 1 warning generated. The return value of debugfs_create_file does not need to be checked [1] and the function returns void so get rid of the ternary operator, it is unnecessary. [1]: https://lore.kernel.org/linux-mm/20150815160730.GB25186@kroah.com/ Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Link: https://github.com/ClangBuiltLinux/linux/issues/658 Signed-off-by: Nathan Chancellor Acked-by: Shannon Nelson Reviewed-by: Greg Kroah-Hartman --- drivers/net/ethernet/pensando/ionic/ionic_debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/pensando/ionic/ionic_debugfs.c b/drivers/net/ethernet/pensando/ionic/ionic_debugfs.c index 7afc4a365b75..bc03cecf80cc 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_debugfs.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_debugfs.c @@ -57,7 +57,7 @@ DEFINE_SHOW_ATTRIBUTE(identity); void ionic_debugfs_add_ident(struct ionic *ionic) { debugfs_create_file("identity", 0400, ionic->dentry, - ionic, &identity_fops) ? 0 : -EOPNOTSUPP; + ionic, &identity_fops); } void ionic_debugfs_add_sizes(struct ionic *ionic) -- cgit v1.2.1 From dd0f9d896d167ab37732dd83986adc3a017a13b4 Mon Sep 17 00:00:00 2001 From: Murilo Fossa Vicentini Date: Mon, 16 Sep 2019 11:50:37 -0300 Subject: ibmvnic: Warn unknown speed message only when carrier is present With commit 0655f9943df2 ("net/ibmvnic: Update carrier state after link state change") we are now able to detect when the carrier is properly present in the device, so only report an unexpected unknown speed when it is properly detected. Unknown speed is expected to be seen by the device in case the backing device has no link detected. Reported-by: Abdul Haleem Tested-by: Abdul Haleem Signed-off-by: Murilo Fossa Vicentini Reviewed-by: Thomas Falcon --- drivers/net/ethernet/ibm/ibmvnic.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 2e5172f61564..3816fff75bb5 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -4312,13 +4312,14 @@ static int handle_query_phys_parms_rsp(union ibmvnic_crq *crq, { struct net_device *netdev = adapter->netdev; int rc; + __be32 rspeed = cpu_to_be32(crq->query_phys_parms_rsp.speed); rc = crq->query_phys_parms_rsp.rc.code; if (rc) { netdev_err(netdev, "Error %d in QUERY_PHYS_PARMS\n", rc); return rc; } - switch (cpu_to_be32(crq->query_phys_parms_rsp.speed)) { + switch (rspeed) { case IBMVNIC_10MBPS: adapter->speed = SPEED_10; break; @@ -4344,8 +4345,8 @@ static int handle_query_phys_parms_rsp(union ibmvnic_crq *crq, adapter->speed = SPEED_100000; break; default: - netdev_warn(netdev, "Unknown speed 0x%08x\n", - cpu_to_be32(crq->query_phys_parms_rsp.speed)); + if (netif_carrier_ok(netdev)) + netdev_warn(netdev, "Unknown speed 0x%08x\n", rspeed); adapter->speed = SPEED_UNKNOWN; } if (crq->query_phys_parms_rsp.flags1 & IBMVNIC_FULL_DUPLEX) -- cgit v1.2.1 From 77d5bc7e6a6cf8bbeca31aab7f0c5449a5eee762 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 17 Sep 2019 10:39:49 -0700 Subject: ipv4: Revert removal of rt_uses_gateway Julian noted that rt_uses_gateway has a more subtle use than 'is gateway set': https://lore.kernel.org/netdev/alpine.LFD.2.21.1909151104060.2546@ja.home.ssi.bg/ Revert that part of the commit referenced in the Fixes tag. Currently, there are no u8 holes in 'struct rtable'. There is a 4-byte hole in the second cacheline which contains the gateway declaration. So move rt_gw_family down to the gateway declarations since they are always used together, and then re-use that u8 for rt_uses_gateway. End result is that rtable size is unchanged. Fixes: 1550c171935d ("ipv4: Prepare rtable for IPv6 gateway") Reported-by: Julian Anastasov Signed-off-by: David Ahern Reviewed-by: Julian Anastasov Signed-off-by: Jakub Kicinski --- drivers/infiniband/core/addr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index 9b76a8fcdd24..bf539c34ccd3 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -352,7 +352,7 @@ static bool has_gateway(const struct dst_entry *dst, sa_family_t family) if (family == AF_INET) { rt = container_of(dst, struct rtable, dst); - return rt->rt_gw_family == AF_INET; + return rt->rt_uses_gateway; } rt6 = container_of(dst, struct rt6_info, dst); -- cgit v1.2.1 From dc579ca5cfea3b9652db73009b394b9a3f46ae29 Mon Sep 17 00:00:00 2001 From: Yan-Hsuan Chuang Date: Mon, 16 Sep 2019 15:03:34 +0800 Subject: rtw88: pci: extract skbs free routine for trx rings These skbs free routines could be used when driver wants to stop PCI bus, because some of the skbs remained in the queue may not have been returned via DMA interrupt. Signed-off-by: Yan-Hsuan Chuang Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtw88/pci.c | 36 +++++++++++++++++++++++--------- 1 file changed, 26 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/realtek/rtw88/pci.c b/drivers/net/wireless/realtek/rtw88/pci.c index 3fdb52a5789a..bc3a36402e56 100644 --- a/drivers/net/wireless/realtek/rtw88/pci.c +++ b/drivers/net/wireless/realtek/rtw88/pci.c @@ -90,16 +90,13 @@ static inline void *rtw_pci_get_tx_desc(struct rtw_pci_tx_ring *tx_ring, u8 idx) return tx_ring->r.head + offset; } -static void rtw_pci_free_tx_ring(struct rtw_dev *rtwdev, - struct rtw_pci_tx_ring *tx_ring) +static void rtw_pci_free_tx_ring_skbs(struct rtw_dev *rtwdev, + struct rtw_pci_tx_ring *tx_ring) { struct pci_dev *pdev = to_pci_dev(rtwdev->dev); struct rtw_pci_tx_data *tx_data; struct sk_buff *skb, *tmp; dma_addr_t dma; - u8 *head = tx_ring->r.head; - u32 len = tx_ring->r.len; - int ring_sz = len * tx_ring->r.desc_size; /* free every skb remained in tx list */ skb_queue_walk_safe(&tx_ring->queue, skb, tmp) { @@ -110,21 +107,30 @@ static void rtw_pci_free_tx_ring(struct rtw_dev *rtwdev, pci_unmap_single(pdev, dma, skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); } +} + +static void rtw_pci_free_tx_ring(struct rtw_dev *rtwdev, + struct rtw_pci_tx_ring *tx_ring) +{ + struct pci_dev *pdev = to_pci_dev(rtwdev->dev); + u8 *head = tx_ring->r.head; + u32 len = tx_ring->r.len; + int ring_sz = len * tx_ring->r.desc_size; + + rtw_pci_free_tx_ring_skbs(rtwdev, tx_ring); /* free the ring itself */ pci_free_consistent(pdev, ring_sz, head, tx_ring->r.dma); tx_ring->r.head = NULL; } -static void rtw_pci_free_rx_ring(struct rtw_dev *rtwdev, - struct rtw_pci_rx_ring *rx_ring) +static void rtw_pci_free_rx_ring_skbs(struct rtw_dev *rtwdev, + struct rtw_pci_rx_ring *rx_ring) { struct pci_dev *pdev = to_pci_dev(rtwdev->dev); struct sk_buff *skb; - dma_addr_t dma; - u8 *head = rx_ring->r.head; int buf_sz = RTK_PCI_RX_BUF_SIZE; - int ring_sz = rx_ring->r.desc_size * rx_ring->r.len; + dma_addr_t dma; int i; for (i = 0; i < rx_ring->r.len; i++) { @@ -137,6 +143,16 @@ static void rtw_pci_free_rx_ring(struct rtw_dev *rtwdev, dev_kfree_skb(skb); rx_ring->buf[i] = NULL; } +} + +static void rtw_pci_free_rx_ring(struct rtw_dev *rtwdev, + struct rtw_pci_rx_ring *rx_ring) +{ + struct pci_dev *pdev = to_pci_dev(rtwdev->dev); + u8 *head = rx_ring->r.head; + int ring_sz = rx_ring->r.desc_size * rx_ring->r.len; + + rtw_pci_free_rx_ring_skbs(rtwdev, rx_ring); pci_free_consistent(pdev, ring_sz, head, rx_ring->r.dma); } -- cgit v1.2.1 From 0e41edcdfe86435fef709b7de8397e8a5a0e1b2f Mon Sep 17 00:00:00 2001 From: Yan-Hsuan Chuang Date: Mon, 16 Sep 2019 15:03:35 +0800 Subject: rtw88: pci: release tx skbs DMAed when stop Interrupt is disabled to stop PCI, which means the skbs queued for each TX ring will not be released via DMA interrupt. To avoid those skbs remained being left in the skb queue until PCI has been removed, driver needs to release skbs by itself. Signed-off-by: Yan-Hsuan Chuang Reviewed-by: Brian Norris Tested-by: Brian Norris Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtw88/pci.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/realtek/rtw88/pci.c b/drivers/net/wireless/realtek/rtw88/pci.c index bc3a36402e56..d90928be663b 100644 --- a/drivers/net/wireless/realtek/rtw88/pci.c +++ b/drivers/net/wireless/realtek/rtw88/pci.c @@ -500,6 +500,17 @@ static void rtw_pci_dma_reset(struct rtw_dev *rtwdev, struct rtw_pci *rtwpci) rtwpci->rx_tag = 0; } +static void rtw_pci_dma_release(struct rtw_dev *rtwdev, struct rtw_pci *rtwpci) +{ + struct rtw_pci_tx_ring *tx_ring; + u8 queue; + + for (queue = 0; queue < RTK_MAX_TX_QUEUE_NUM; queue++) { + tx_ring = &rtwpci->tx_rings[queue]; + rtw_pci_free_tx_ring_skbs(rtwdev, tx_ring); + } +} + static int rtw_pci_start(struct rtw_dev *rtwdev) { struct rtw_pci *rtwpci = (struct rtw_pci *)rtwdev->priv; @@ -521,6 +532,7 @@ static void rtw_pci_stop(struct rtw_dev *rtwdev) spin_lock_irqsave(&rtwpci->irq_lock, flags); rtw_pci_disable_interrupt(rtwdev, rtwpci); + rtw_pci_dma_release(rtwdev, rtwpci); spin_unlock_irqrestore(&rtwpci->irq_lock, flags); } -- cgit v1.2.1 From 6355592e6b55be8c568b62efba5fe5a1c919a2db Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 19 Sep 2019 11:15:32 +0200 Subject: zd1211rw: zd_usb: Use "%zu" to format size_t MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On 32-bit: drivers/net/wireless/zydas/zd1211rw/zd_usb.c: In function ‘check_read_regs’: drivers/net/wireless/zydas/zd1211rw/zd_def.h:18:25: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 6 has type ‘size_t’ {aka ‘unsigned int’} [-Wformat=] dev_printk(level, dev, "%s() " fmt, __func__, ##args) ^~~~~~~ drivers/net/wireless/zydas/zd1211rw/zd_def.h:22:4: note: in expansion of macro ‘dev_printk_f’ dev_printk_f(KERN_DEBUG, dev, fmt, ## args) ^~~~~~~~~~~~ drivers/net/wireless/zydas/zd1211rw/zd_usb.c:1635:3: note: in expansion of macro ‘dev_dbg_f’ dev_dbg_f(zd_usb_dev(usb), ^~~~~~~~~ drivers/net/wireless/zydas/zd1211rw/zd_usb.c:1636:51: note: format string is defined here "error: actual length %d less than expected %ld\n", ~~^ %d Fixes: 84b0b66352470e64 ("zd1211rw: zd_usb: Use struct_size() helper") Signed-off-by: Geert Uytterhoeven Signed-off-by: Kalle Valo --- drivers/net/wireless/zydas/zd1211rw/zd_usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_usb.c b/drivers/net/wireless/zydas/zd1211rw/zd_usb.c index 4e44ea8c652d..7b5c2fe5bd4d 100644 --- a/drivers/net/wireless/zydas/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zydas/zd1211rw/zd_usb.c @@ -1633,7 +1633,7 @@ static bool check_read_regs(struct zd_usb *usb, struct usb_req_read_regs *req, */ if (rr->length < struct_size(regs, regs, count)) { dev_dbg_f(zd_usb_dev(usb), - "error: actual length %d less than expected %ld\n", + "error: actual length %d less than expected %zu\n", rr->length, struct_size(regs, regs, count)); return false; } -- cgit v1.2.1 From 3fe4b3351301660653a2bc73f2226da0ebd2b95e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Wed, 18 Sep 2019 14:01:46 +0200 Subject: cdc_ncm: fix divide-by-zero caused by invalid wMaxPacketSize MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Endpoints with zero wMaxPacketSize are not usable for transferring data. Ignore such endpoints when looking for valid in, out and status pipes, to make the driver more robust against invalid and meaningless descriptors. The wMaxPacketSize of the out pipe is used as divisor. So this change fixes a divide-by-zero bug. Reported-by: syzbot+ce366e2b8296e25d84f5@syzkaller.appspotmail.com Signed-off-by: Bjørn Mork Signed-off-by: Jakub Kicinski --- drivers/net/usb/cdc_ncm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 50c05d0f44cb..00cab3f43a4c 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -681,8 +681,12 @@ cdc_ncm_find_endpoints(struct usbnet *dev, struct usb_interface *intf) u8 ep; for (ep = 0; ep < intf->cur_altsetting->desc.bNumEndpoints; ep++) { - e = intf->cur_altsetting->endpoint + ep; + + /* ignore endpoints which cannot transfer data */ + if (!usb_endpoint_maxp(&e->desc)) + continue; + switch (e->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { case USB_ENDPOINT_XFER_INT: if (usb_endpoint_dir_in(&e->desc)) { -- cgit v1.2.1 From 8d3d7c2029c1b360f1a6b0a2fca470b57eb575c0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Wed, 18 Sep 2019 14:17:38 +0200 Subject: usbnet: ignore endpoints with invalid wMaxPacketSize MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Endpoints with zero wMaxPacketSize are not usable for transferring data. Ignore such endpoints when looking for valid in, out and status pipes, to make the drivers more robust against invalid and meaningless descriptors. The wMaxPacketSize of these endpoints are used for memory allocations and as divisors in many usbnet minidrivers. Avoiding zero is therefore critical. Signed-off-by: Bjørn Mork Signed-off-by: Jakub Kicinski --- drivers/net/usb/usbnet.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index e44849499b89..dde05e2fdc3e 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -100,6 +100,11 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf) int intr = 0; e = alt->endpoint + ep; + + /* ignore endpoints which cannot transfer data */ + if (!usb_endpoint_maxp(&e->desc)) + continue; + switch (e->desc.bmAttributes) { case USB_ENDPOINT_XFER_INT: if (!usb_endpoint_dir_in(&e->desc)) -- cgit v1.2.1 From e47488b2df7f9cb405789c7f5d4c27909fc597ae Mon Sep 17 00:00:00 2001 From: Peter Mamonov Date: Wed, 18 Sep 2019 19:27:55 +0300 Subject: net/phy: fix DP83865 10 Mbps HDX loopback disable function According to the DP83865 datasheet "the 10 Mbps HDX loopback can be disabled in the expanded memory register 0x1C0.1". The driver erroneously used bit 0 instead of bit 1. Fixes: 4621bf129856 ("phy: Add file missed in previous commit.") Signed-off-by: Peter Mamonov Reviewed-by: Andrew Lunn Signed-off-by: Jakub Kicinski --- drivers/net/phy/national.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/national.c b/drivers/net/phy/national.c index a221dd552c3c..a5bf0874c7d8 100644 --- a/drivers/net/phy/national.c +++ b/drivers/net/phy/national.c @@ -105,14 +105,17 @@ static void ns_giga_speed_fallback(struct phy_device *phydev, int mode) static void ns_10_base_t_hdx_loopack(struct phy_device *phydev, int disable) { + u16 lb_dis = BIT(1); + if (disable) - ns_exp_write(phydev, 0x1c0, ns_exp_read(phydev, 0x1c0) | 1); + ns_exp_write(phydev, 0x1c0, + ns_exp_read(phydev, 0x1c0) | lb_dis); else ns_exp_write(phydev, 0x1c0, - ns_exp_read(phydev, 0x1c0) & 0xfffe); + ns_exp_read(phydev, 0x1c0) & ~lb_dis); pr_debug("10BASE-T HDX loopback %s\n", - (ns_exp_read(phydev, 0x1c0) & 0x0001) ? "off" : "on"); + (ns_exp_read(phydev, 0x1c0) & lb_dis) ? "off" : "on"); } static int ns_config_init(struct phy_device *phydev) -- cgit v1.2.1 From b0e1ee435aba68c4080e3cb67adf6573aa5bcc6d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 18 Sep 2019 22:21:24 +0200 Subject: net: remove netx ethernet driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ARM netx platform got removed in 5.3, so this driver is now useless. Reported-by: Uwe Kleine-König Cc: Sascha Hauer Signed-off-by: Arnd Bergmann Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/Kconfig | 11 - drivers/net/ethernet/Makefile | 1 - drivers/net/ethernet/netx-eth.c | 497 ---------------------------------------- 3 files changed, 509 deletions(-) delete mode 100644 drivers/net/ethernet/netx-eth.c (limited to 'drivers') diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 1e2de9d062bf..e8e9c166185d 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -140,17 +140,6 @@ source "drivers/net/ethernet/neterion/Kconfig" source "drivers/net/ethernet/netronome/Kconfig" source "drivers/net/ethernet/ni/Kconfig" source "drivers/net/ethernet/8390/Kconfig" - -config NET_NETX - tristate "NetX Ethernet support" - select MII - depends on ARCH_NETX - ---help--- - This is support for the Hilscher netX builtin Ethernet ports - - To compile this driver as a module, choose M here. The module - will be called netx-eth. - source "drivers/net/ethernet/nvidia/Kconfig" source "drivers/net/ethernet/nxp/Kconfig" source "drivers/net/ethernet/oki-semi/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 77f9838a76c9..05abebc17804 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -64,7 +64,6 @@ obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/ obj-$(CONFIG_NET_VENDOR_NETERION) += neterion/ obj-$(CONFIG_NET_VENDOR_NETRONOME) += netronome/ obj-$(CONFIG_NET_VENDOR_NI) += ni/ -obj-$(CONFIG_NET_NETX) += netx-eth.o obj-$(CONFIG_NET_VENDOR_NVIDIA) += nvidia/ obj-$(CONFIG_LPC_ENET) += nxp/ obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/ diff --git a/drivers/net/ethernet/netx-eth.c b/drivers/net/ethernet/netx-eth.c deleted file mode 100644 index cf6e7eb1b1e1..000000000000 --- a/drivers/net/ethernet/netx-eth.c +++ /dev/null @@ -1,497 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * drivers/net/ethernet/netx-eth.c - * - * Copyright (c) 2005 Sascha Hauer , Pengutronix - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -/* XC Fifo Offsets */ -#define EMPTY_PTR_FIFO(xcno) (0 + ((xcno) << 3)) /* Index of the empty pointer FIFO */ -#define IND_FIFO_PORT_HI(xcno) (1 + ((xcno) << 3)) /* Index of the FIFO where received */ - /* Data packages are indicated by XC */ -#define IND_FIFO_PORT_LO(xcno) (2 + ((xcno) << 3)) /* Index of the FIFO where received */ - /* Data packages are indicated by XC */ -#define REQ_FIFO_PORT_HI(xcno) (3 + ((xcno) << 3)) /* Index of the FIFO where Data packages */ - /* have to be indicated by ARM which */ - /* shall be sent */ -#define REQ_FIFO_PORT_LO(xcno) (4 + ((xcno) << 3)) /* Index of the FIFO where Data packages */ - /* have to be indicated by ARM which shall */ - /* be sent */ -#define CON_FIFO_PORT_HI(xcno) (5 + ((xcno) << 3)) /* Index of the FIFO where sent Data packages */ - /* are confirmed */ -#define CON_FIFO_PORT_LO(xcno) (6 + ((xcno) << 3)) /* Index of the FIFO where sent Data */ - /* packages are confirmed */ -#define PFIFO_MASK(xcno) (0x7f << (xcno*8)) - -#define FIFO_PTR_FRAMELEN_SHIFT 0 -#define FIFO_PTR_FRAMELEN_MASK (0x7ff << 0) -#define FIFO_PTR_FRAMELEN(len) (((len) << 0) & FIFO_PTR_FRAMELEN_MASK) -#define FIFO_PTR_TIMETRIG (1<<11) -#define FIFO_PTR_MULTI_REQ -#define FIFO_PTR_ORIGIN (1<<14) -#define FIFO_PTR_VLAN (1<<15) -#define FIFO_PTR_FRAMENO_SHIFT 16 -#define FIFO_PTR_FRAMENO_MASK (0x3f << 16) -#define FIFO_PTR_FRAMENO(no) (((no) << 16) & FIFO_PTR_FRAMENO_MASK) -#define FIFO_PTR_SEGMENT_SHIFT 22 -#define FIFO_PTR_SEGMENT_MASK (0xf << 22) -#define FIFO_PTR_SEGMENT(seg) (((seg) & 0xf) << 22) -#define FIFO_PTR_ERROR_SHIFT 28 -#define FIFO_PTR_ERROR_MASK (0xf << 28) - -#define ISR_LINK_STATUS_CHANGE (1<<4) -#define ISR_IND_LO (1<<3) -#define ISR_CON_LO (1<<2) -#define ISR_IND_HI (1<<1) -#define ISR_CON_HI (1<<0) - -#define ETH_MAC_LOCAL_CONFIG 0x1560 -#define ETH_MAC_4321 0x1564 -#define ETH_MAC_65 0x1568 - -#define MAC_TRAFFIC_CLASS_ARRANGEMENT_SHIFT 16 -#define MAC_TRAFFIC_CLASS_ARRANGEMENT_MASK (0xf<data; - unsigned int len = skb->len; - - spin_lock_irq(&priv->lock); - memcpy_toio(priv->sram_base + 1560, (void *)buf, len); - if (len < 60) { - memset_io(priv->sram_base + 1560 + len, 0, 60 - len); - len = 60; - } - - pfifo_push(REQ_FIFO_PORT_LO(priv->id), - FIFO_PTR_SEGMENT(priv->id) | - FIFO_PTR_FRAMENO(1) | - FIFO_PTR_FRAMELEN(len)); - - ndev->stats.tx_packets++; - ndev->stats.tx_bytes += skb->len; - - netif_stop_queue(ndev); - spin_unlock_irq(&priv->lock); - dev_kfree_skb(skb); - - return NETDEV_TX_OK; -} - -static void netx_eth_receive(struct net_device *ndev) -{ - struct netx_eth_priv *priv = netdev_priv(ndev); - unsigned int val, frameno, seg, len; - unsigned char *data; - struct sk_buff *skb; - - val = pfifo_pop(IND_FIFO_PORT_LO(priv->id)); - - frameno = (val & FIFO_PTR_FRAMENO_MASK) >> FIFO_PTR_FRAMENO_SHIFT; - seg = (val & FIFO_PTR_SEGMENT_MASK) >> FIFO_PTR_SEGMENT_SHIFT; - len = (val & FIFO_PTR_FRAMELEN_MASK) >> FIFO_PTR_FRAMELEN_SHIFT; - - skb = netdev_alloc_skb(ndev, len); - if (unlikely(skb == NULL)) { - ndev->stats.rx_dropped++; - return; - } - - data = skb_put(skb, len); - - memcpy_fromio(data, priv->sram_base + frameno * 1560, len); - - pfifo_push(EMPTY_PTR_FIFO(priv->id), - FIFO_PTR_SEGMENT(seg) | FIFO_PTR_FRAMENO(frameno)); - - skb->protocol = eth_type_trans(skb, ndev); - netif_rx(skb); - ndev->stats.rx_packets++; - ndev->stats.rx_bytes += len; -} - -static irqreturn_t -netx_eth_interrupt(int irq, void *dev_id) -{ - struct net_device *ndev = dev_id; - struct netx_eth_priv *priv = netdev_priv(ndev); - int status; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - - status = readl(NETX_PFIFO_XPEC_ISR(priv->id)); - while (status) { - int fill_level; - writel(status, NETX_PFIFO_XPEC_ISR(priv->id)); - - if ((status & ISR_CON_HI) || (status & ISR_IND_HI)) - printk("%s: unexpected status: 0x%08x\n", - __func__, status); - - fill_level = - readl(NETX_PFIFO_FILL_LEVEL(IND_FIFO_PORT_LO(priv->id))); - while (fill_level--) - netx_eth_receive(ndev); - - if (status & ISR_CON_LO) - netif_wake_queue(ndev); - - if (status & ISR_LINK_STATUS_CHANGE) - mii_check_media(&priv->mii, netif_msg_link(priv), 1); - - status = readl(NETX_PFIFO_XPEC_ISR(priv->id)); - } - spin_unlock_irqrestore(&priv->lock, flags); - return IRQ_HANDLED; -} - -static int netx_eth_open(struct net_device *ndev) -{ - struct netx_eth_priv *priv = netdev_priv(ndev); - - if (request_irq - (ndev->irq, netx_eth_interrupt, IRQF_SHARED, ndev->name, ndev)) - return -EAGAIN; - - writel(ndev->dev_addr[0] | - ndev->dev_addr[1]<<8 | - ndev->dev_addr[2]<<16 | - ndev->dev_addr[3]<<24, - priv->xpec_base + NETX_XPEC_RAM_START_OFS + ETH_MAC_4321); - writel(ndev->dev_addr[4] | - ndev->dev_addr[5]<<8, - priv->xpec_base + NETX_XPEC_RAM_START_OFS + ETH_MAC_65); - - writel(LOCAL_CONFIG_LINK_STATUS_IRQ_EN | - LOCAL_CONFIG_CON_LO_IRQ_EN | - LOCAL_CONFIG_CON_HI_IRQ_EN | - LOCAL_CONFIG_IND_LO_IRQ_EN | - LOCAL_CONFIG_IND_HI_IRQ_EN, - priv->xpec_base + NETX_XPEC_RAM_START_OFS + - ETH_MAC_LOCAL_CONFIG); - - mii_check_media(&priv->mii, netif_msg_link(priv), 1); - netif_start_queue(ndev); - - return 0; -} - -static int netx_eth_close(struct net_device *ndev) -{ - struct netx_eth_priv *priv = netdev_priv(ndev); - - netif_stop_queue(ndev); - - writel(0, - priv->xpec_base + NETX_XPEC_RAM_START_OFS + ETH_MAC_LOCAL_CONFIG); - - free_irq(ndev->irq, ndev); - - return 0; -} - -static void netx_eth_timeout(struct net_device *ndev) -{ - struct netx_eth_priv *priv = netdev_priv(ndev); - int i; - - printk(KERN_ERR "%s: transmit timed out, resetting\n", ndev->name); - - spin_lock_irq(&priv->lock); - - xc_reset(priv->xc); - xc_start(priv->xc); - - for (i=2; i<=18; i++) - pfifo_push(EMPTY_PTR_FIFO(priv->id), - FIFO_PTR_FRAMENO(i) | FIFO_PTR_SEGMENT(priv->id)); - - spin_unlock_irq(&priv->lock); - - netif_wake_queue(ndev); -} - -static int -netx_eth_phy_read(struct net_device *ndev, int phy_id, int reg) -{ - unsigned int val; - - val = MIIMU_SNRDY | MIIMU_PREAMBLE | MIIMU_PHYADDR(phy_id) | - MIIMU_REGADDR(reg) | MIIMU_PHY_NRES; - - writel(val, NETX_MIIMU); - while (readl(NETX_MIIMU) & MIIMU_SNRDY); - - return readl(NETX_MIIMU) >> 16; - -} - -static void -netx_eth_phy_write(struct net_device *ndev, int phy_id, int reg, int value) -{ - unsigned int val; - - val = MIIMU_SNRDY | MIIMU_PREAMBLE | MIIMU_PHYADDR(phy_id) | - MIIMU_REGADDR(reg) | MIIMU_PHY_NRES | MIIMU_OPMODE_WRITE | - MIIMU_DATA(value); - - writel(val, NETX_MIIMU); - while (readl(NETX_MIIMU) & MIIMU_SNRDY); -} - -static const struct net_device_ops netx_eth_netdev_ops = { - .ndo_open = netx_eth_open, - .ndo_stop = netx_eth_close, - .ndo_start_xmit = netx_eth_hard_start_xmit, - .ndo_tx_timeout = netx_eth_timeout, - .ndo_set_rx_mode = netx_eth_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, -}; - -static int netx_eth_enable(struct net_device *ndev) -{ - struct netx_eth_priv *priv = netdev_priv(ndev); - unsigned int mac4321, mac65; - int running, i, ret; - bool inv_mac_addr = false; - - ndev->netdev_ops = &netx_eth_netdev_ops; - ndev->watchdog_timeo = msecs_to_jiffies(5000); - - priv->msg_enable = NETIF_MSG_LINK; - priv->mii.phy_id_mask = 0x1f; - priv->mii.reg_num_mask = 0x1f; - priv->mii.force_media = 0; - priv->mii.full_duplex = 0; - priv->mii.dev = ndev; - priv->mii.mdio_read = netx_eth_phy_read; - priv->mii.mdio_write = netx_eth_phy_write; - priv->mii.phy_id = INTERNAL_PHY_ADR + priv->id; - - running = xc_running(priv->xc); - xc_stop(priv->xc); - - /* if the xc engine is already running, assume the bootloader has - * loaded the firmware for us - */ - if (running) { - /* get Node Address from hardware */ - mac4321 = readl(priv->xpec_base + - NETX_XPEC_RAM_START_OFS + ETH_MAC_4321); - mac65 = readl(priv->xpec_base + - NETX_XPEC_RAM_START_OFS + ETH_MAC_65); - - ndev->dev_addr[0] = mac4321 & 0xff; - ndev->dev_addr[1] = (mac4321 >> 8) & 0xff; - ndev->dev_addr[2] = (mac4321 >> 16) & 0xff; - ndev->dev_addr[3] = (mac4321 >> 24) & 0xff; - ndev->dev_addr[4] = mac65 & 0xff; - ndev->dev_addr[5] = (mac65 >> 8) & 0xff; - } else { - if (xc_request_firmware(priv->xc)) { - printk(CARDNAME ": requesting firmware failed\n"); - return -ENODEV; - } - } - - xc_reset(priv->xc); - xc_start(priv->xc); - - if (!is_valid_ether_addr(ndev->dev_addr)) - inv_mac_addr = true; - - for (i=2; i<=18; i++) - pfifo_push(EMPTY_PTR_FIFO(priv->id), - FIFO_PTR_FRAMENO(i) | FIFO_PTR_SEGMENT(priv->id)); - - ret = register_netdev(ndev); - if (inv_mac_addr) - printk("%s: Invalid ethernet MAC address. Please set using ip\n", - ndev->name); - - return ret; -} - -static int netx_eth_drv_probe(struct platform_device *pdev) -{ - struct netx_eth_priv *priv; - struct net_device *ndev; - struct netxeth_platform_data *pdata; - int ret; - - ndev = alloc_etherdev(sizeof (struct netx_eth_priv)); - if (!ndev) { - ret = -ENOMEM; - goto exit; - } - SET_NETDEV_DEV(ndev, &pdev->dev); - - platform_set_drvdata(pdev, ndev); - - priv = netdev_priv(ndev); - - pdata = dev_get_platdata(&pdev->dev); - priv->xc = request_xc(pdata->xcno, &pdev->dev); - if (!priv->xc) { - dev_err(&pdev->dev, "unable to request xc engine\n"); - ret = -ENODEV; - goto exit_free_netdev; - } - - ndev->irq = priv->xc->irq; - priv->id = pdev->id; - priv->xpec_base = priv->xc->xpec_base; - priv->xmac_base = priv->xc->xmac_base; - priv->sram_base = priv->xc->sram_base; - - spin_lock_init(&priv->lock); - - ret = pfifo_request(PFIFO_MASK(priv->id)); - if (ret) { - printk("unable to request PFIFO\n"); - goto exit_free_xc; - } - - ret = netx_eth_enable(ndev); - if (ret) - goto exit_free_pfifo; - - return 0; -exit_free_pfifo: - pfifo_free(PFIFO_MASK(priv->id)); -exit_free_xc: - free_xc(priv->xc); -exit_free_netdev: - free_netdev(ndev); -exit: - return ret; -} - -static int netx_eth_drv_remove(struct platform_device *pdev) -{ - struct net_device *ndev = platform_get_drvdata(pdev); - struct netx_eth_priv *priv = netdev_priv(ndev); - - unregister_netdev(ndev); - xc_stop(priv->xc); - free_xc(priv->xc); - free_netdev(ndev); - pfifo_free(PFIFO_MASK(priv->id)); - - return 0; -} - -static int netx_eth_drv_suspend(struct platform_device *pdev, pm_message_t state) -{ - dev_err(&pdev->dev, "suspend not implemented\n"); - return 0; -} - -static int netx_eth_drv_resume(struct platform_device *pdev) -{ - dev_err(&pdev->dev, "resume not implemented\n"); - return 0; -} - -static struct platform_driver netx_eth_driver = { - .probe = netx_eth_drv_probe, - .remove = netx_eth_drv_remove, - .suspend = netx_eth_drv_suspend, - .resume = netx_eth_drv_resume, - .driver = { - .name = CARDNAME, - }, -}; - -static int __init netx_eth_init(void) -{ - unsigned int phy_control, val; - - printk("NetX Ethernet driver\n"); - - phy_control = PHY_CONTROL_PHY_ADDRESS(INTERNAL_PHY_ADR>>1) | - PHY_CONTROL_PHY1_MODE(PHY_MODE_ALL) | - PHY_CONTROL_PHY1_AUTOMDIX | - PHY_CONTROL_PHY1_EN | - PHY_CONTROL_PHY0_MODE(PHY_MODE_ALL) | - PHY_CONTROL_PHY0_AUTOMDIX | - PHY_CONTROL_PHY0_EN | - PHY_CONTROL_CLK_XLATIN; - - val = readl(NETX_SYSTEM_IOC_ACCESS_KEY); - writel(val, NETX_SYSTEM_IOC_ACCESS_KEY); - - writel(phy_control | PHY_CONTROL_RESET, NETX_SYSTEM_PHY_CONTROL); - udelay(100); - - val = readl(NETX_SYSTEM_IOC_ACCESS_KEY); - writel(val, NETX_SYSTEM_IOC_ACCESS_KEY); - - writel(phy_control, NETX_SYSTEM_PHY_CONTROL); - - return platform_driver_register(&netx_eth_driver); -} - -static void __exit netx_eth_cleanup(void) -{ - platform_driver_unregister(&netx_eth_driver); -} - -module_init(netx_eth_init); -module_exit(netx_eth_cleanup); - -MODULE_AUTHOR("Sascha Hauer, Pengutronix"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" CARDNAME); -MODULE_FIRMWARE("xc0.bin"); -MODULE_FIRMWARE("xc1.bin"); -MODULE_FIRMWARE("xc2.bin"); -- cgit v1.2.1 From a8d570de0cc6acd6dc994515f163ccbc5e54ab60 Mon Sep 17 00:00:00 2001 From: Mao Wenan Date: Thu, 19 Sep 2019 14:38:19 +0800 Subject: net: dsa: sja1105: Add dependency for NET_DSA_SJA1105_TAS If CONFIG_NET_DSA_SJA1105_TAS=y and CONFIG_NET_SCH_TAPRIO=n, below error can be found: drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_setup_tc_taprio': sja1105_tas.c:(.text+0x318): undefined reference to `taprio_offload_free' sja1105_tas.c:(.text+0x590): undefined reference to `taprio_offload_get' drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_tas_teardown': sja1105_tas.c:(.text+0x610): undefined reference to `taprio_offload_free' make: *** [vmlinux] Error 1 sja1105_tas needs tc-taprio, so this patch add the dependency for it. Fixes: 317ab5b86c8e ("net: dsa: sja1105: Configure the Time-Aware Scheduler via tc-taprio offload") Signed-off-by: Mao Wenan Reviewed-by: Vladimir Oltean Signed-off-by: Jakub Kicinski --- drivers/net/dsa/sja1105/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/dsa/sja1105/Kconfig b/drivers/net/dsa/sja1105/Kconfig index 55424f39cb0d..f40b248f0b23 100644 --- a/drivers/net/dsa/sja1105/Kconfig +++ b/drivers/net/dsa/sja1105/Kconfig @@ -27,6 +27,7 @@ config NET_DSA_SJA1105_PTP config NET_DSA_SJA1105_TAS bool "Support for the Time-Aware Scheduler on NXP SJA1105" depends on NET_DSA_SJA1105 + depends on NET_SCH_TAPRIO help This enables support for the TTEthernet-based egress scheduling engine in the SJA1105 DSA driver, which is controlled using a -- cgit v1.2.1 From b6b6cc9acd7b99df216c007e9565aebdc2c77469 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 19 Sep 2019 14:33:43 +0200 Subject: net: stmmac: selftest: avoid large stack usage Putting a struct stmmac_rss object on the stack is a bad idea, as it exceeds the warning limit for a stack frame on 32-bit architectures: drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c:1221:12: error: stack frame size of 1208 bytes in function '__stmmac_test_l3filt' [-Werror,-Wframe-larger-than=] drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c:1338:12: error: stack frame size of 1208 bytes in function '__stmmac_test_l4filt' [-Werror,-Wframe-larger-than=] As the object is the trivial empty case, change the called function to accept a NULL pointer to mean the same thing and remove the large variable in the two callers. Fixes: 4647e021193d ("net: stmmac: selftests: Add selftest for L3/L4 Filters") Signed-off-by: Arnd Bergmann Acked-by: Jose Abreu Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 5 ++--- drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c | 14 ++++---------- 2 files changed, 6 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c index d5173dd02a71..2b277b2c586b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c @@ -523,19 +523,18 @@ static int dwxgmac2_rss_configure(struct mac_device_info *hw, struct stmmac_rss *cfg, u32 num_rxq) { void __iomem *ioaddr = hw->pcsr; - u32 *key = (u32 *)cfg->key; int i, ret; u32 value; value = readl(ioaddr + XGMAC_RSS_CTRL); - if (!cfg->enable) { + if (!cfg || !cfg->enable) { value &= ~XGMAC_RSSE; writel(value, ioaddr + XGMAC_RSS_CTRL); return 0; } for (i = 0; i < (sizeof(cfg->key) / sizeof(u32)); i++) { - ret = dwxgmac2_rss_write_reg(ioaddr, true, i, *key++); + ret = dwxgmac2_rss_write_reg(ioaddr, true, i, cfg->key[i]); if (ret) return ret; } diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c index c56e89e1ae56..9c8d210b2d6a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c @@ -1233,12 +1233,9 @@ static int __stmmac_test_l3filt(struct stmmac_priv *priv, u32 dst, u32 src, return -EOPNOTSUPP; if (!priv->dma_cap.l3l4fnum) return -EOPNOTSUPP; - if (priv->rss.enable) { - struct stmmac_rss rss = { .enable = false, }; - - stmmac_rss_configure(priv, priv->hw, &rss, + if (priv->rss.enable) + stmmac_rss_configure(priv, priv->hw, NULL, priv->plat->rx_queues_to_use); - } dissector = kzalloc(sizeof(*dissector), GFP_KERNEL); if (!dissector) { @@ -1357,12 +1354,9 @@ static int __stmmac_test_l4filt(struct stmmac_priv *priv, u32 dst, u32 src, return -EOPNOTSUPP; if (!priv->dma_cap.l3l4fnum) return -EOPNOTSUPP; - if (priv->rss.enable) { - struct stmmac_rss rss = { .enable = false, }; - - stmmac_rss_configure(priv, priv->hw, &rss, + if (priv->rss.enable) + stmmac_rss_configure(priv, priv->hw, NULL, priv->plat->rx_queues_to_use); - } dissector = kzalloc(sizeof(*dissector), GFP_KERNEL); if (!dissector) { -- cgit v1.2.1 From 24ccb0ab95bf14e414cf2ba65af5458bc5a2e865 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Fri, 20 Sep 2019 06:56:56 +0200 Subject: qede: qede_fp: simplify a bit 'qede_rx_build_skb()' Use 'skb_put_data()' instead of rewritting it. This improves readability. Signed-off-by: Christophe JAILLET Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/qlogic/qede/qede_fp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qede/qede_fp.c b/drivers/net/ethernet/qlogic/qede/qede_fp.c index 0ae28f0d2523..004c0bfec41d 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_fp.c +++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c @@ -779,8 +779,7 @@ qede_rx_build_skb(struct qede_dev *edev, return NULL; skb_reserve(skb, pad); - memcpy(skb_put(skb, len), - page_address(bd->data) + offset, len); + skb_put_data(skb, page_address(bd->data) + offset, len); qede_reuse_page(rxq, bd); goto out; } -- cgit v1.2.1 From ff04cfbaa23644562f369eeca0b44ef66e185c9e Mon Sep 17 00:00:00 2001 From: Mao Wenan Date: Sun, 22 Sep 2019 13:38:08 +0800 Subject: net: ena: Select DIMLIB for ENA_ETHERNET If CONFIG_ENA_ETHERNET=y and CONFIG_DIMLIB=n, below erros can be found: drivers/net/ethernet/amazon/ena/ena_netdev.o: In function `ena_dim_work': ena_netdev.c:(.text+0x21cc): undefined reference to `net_dim_get_rx_moderation' ena_netdev.c:(.text+0x21cc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `net_dim_get_rx_moderation' drivers/net/ethernet/amazon/ena/ena_netdev.o: In function `ena_io_poll': ena_netdev.c:(.text+0x7bd4): undefined reference to `net_dim' ena_netdev.c:(.text+0x7bd4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `net_dim' After commit 282faf61a053 ("net: ena: switch to dim algorithm for rx adaptive interrupt moderation"), it introduces dim algorithm, which configured by CONFIG_DIMLIB. So, this patch is to select DIMLIB for ENA_ETHERNET. Fixes: 282faf61a053 ("net: ena: switch to dim algorithm for rx adaptive interrupt moderation") Signed-off-by: Mao Wenan Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/amazon/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/amazon/Kconfig b/drivers/net/ethernet/amazon/Kconfig index 69ca99d8ac26..cca72a75f551 100644 --- a/drivers/net/ethernet/amazon/Kconfig +++ b/drivers/net/ethernet/amazon/Kconfig @@ -19,6 +19,7 @@ if NET_VENDOR_AMAZON config ENA_ETHERNET tristate "Elastic Network Adapter (ENA) support" depends on PCI_MSI && !CPU_BIG_ENDIAN + select DIMLIB ---help--- This driver supports Elastic Network Adapter (ENA)" -- cgit v1.2.1 From 73a63ee9955494e18a6f7d9ba396f5e78e3ce307 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 21 Sep 2019 08:59:26 +0300 Subject: ionic: Fix an error code in ionic_lif_alloc() We need to set the error code on this path. Otherwise it probably results in a NULL dereference down the line. Fixes: aa3198819bea ("ionic: Add RSS support") Signed-off-by: Dan Carpenter Acked-by: Shannon Nelson Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/pensando/ionic/ionic_lif.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c index db7c82742828..72107a0627a9 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c @@ -1704,6 +1704,7 @@ static struct ionic_lif *ionic_lif_alloc(struct ionic *ionic, unsigned int index GFP_KERNEL); if (!lif->rss_ind_tbl) { + err = -ENOMEM; dev_err(dev, "Failed to allocate rss indirection table, aborting\n"); goto err_out_free_qcqs; } -- cgit v1.2.1 From 938e4d49c26eee7b6cb39f2d516126ac39391511 Mon Sep 17 00:00:00 2001 From: Nishad Kamdar Date: Sat, 21 Sep 2019 19:00:16 +0530 Subject: net: dsa: b53: Use the correct style for SPDX License Identifier This patch corrects the SPDX License Identifier style in header file for Broadcom BCM53xx managed switch driver. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches Signed-off-by: Nishad Kamdar Reviewed-by: Vivien Didelot Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski --- drivers/net/dsa/b53/b53_serdes.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/b53/b53_serdes.h b/drivers/net/dsa/b53/b53_serdes.h index 3bb4f91aec9e..55d280fe38e4 100644 --- a/drivers/net/dsa/b53/b53_serdes.h +++ b/drivers/net/dsa/b53/b53_serdes.h @@ -1,5 +1,5 @@ -/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause - * +/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */ +/* * Northstar Plus switch SerDes/SGMII PHY definitions * * Copyright (C) 2018 Florian Fainelli -- cgit v1.2.1 From 34b4688425d9841a19a15fa6ae2bfc12a372650f Mon Sep 17 00:00:00 2001 From: Nishad Kamdar Date: Sat, 21 Sep 2019 19:15:25 +0530 Subject: net: dsa: Use the correct style for SPDX License Identifier This patch corrects the SPDX License Identifier style in header file for Distributed Switch Architecture drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches Signed-off-by: Nishad Kamdar Reviewed-by: Vivien Didelot Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski --- drivers/net/dsa/lantiq_pce.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/dsa/lantiq_pce.h b/drivers/net/dsa/lantiq_pce.h index 180663138e75..e2be31f3672a 100644 --- a/drivers/net/dsa/lantiq_pce.h +++ b/drivers/net/dsa/lantiq_pce.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * PCE microcode extracted from UGW 7.1.1 switch api * -- cgit v1.2.1 From 0b8dc6abbdb9f6696b1a79c42976e506645e5c2c Mon Sep 17 00:00:00 2001 From: Yan-Hsuan Chuang Date: Mon, 23 Sep 2019 10:47:03 +0800 Subject: rtw88: configure firmware after HCI started After firmware has been downloaded, driver should send some information to it through H2C commands. Those H2C commands are transmitted through TX path. But before HCI has been started, the TX path is not working completely. Such as PCI interfaces, the interrupts are not enabled, hence TX interrupts will not be issued after H2C skb has been DMAed to the device. And the H2C skbs will not be released until the device is powered off. Signed-off-by: Yan-Hsuan Chuang Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtw88/mac.c | 3 --- drivers/net/wireless/realtek/rtw88/main.c | 4 ++++ 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/realtek/rtw88/mac.c b/drivers/net/wireless/realtek/rtw88/mac.c index fc14b37d927d..b61b073031e5 100644 --- a/drivers/net/wireless/realtek/rtw88/mac.c +++ b/drivers/net/wireless/realtek/rtw88/mac.c @@ -707,9 +707,6 @@ int rtw_download_firmware(struct rtw_dev *rtwdev, struct rtw_fw_state *fw) rtwdev->h2c.last_box_num = 0; rtwdev->h2c.seq = 0; - rtw_fw_send_general_info(rtwdev); - rtw_fw_send_phydm_info(rtwdev); - rtw_flag_set(rtwdev, RTW_FLAG_FW_RUNNING); return 0; diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c index fc8f6213fc8f..6dd457741b15 100644 --- a/drivers/net/wireless/realtek/rtw88/main.c +++ b/drivers/net/wireless/realtek/rtw88/main.c @@ -704,6 +704,10 @@ static int rtw_power_on(struct rtw_dev *rtwdev) goto err_off; } + /* send H2C after HCI has started */ + rtw_fw_send_general_info(rtwdev); + rtw_fw_send_phydm_info(rtwdev); + wifi_only = !rtwdev->efuse.btcoex; rtw_coex_power_on_setting(rtwdev); rtw_coex_init_hw_config(rtwdev, wifi_only); -- cgit v1.2.1 From cc5fd15fc5578e5a3da13f6b14b42ebef5ad42c2 Mon Sep 17 00:00:00 2001 From: Alex Vesker Date: Thu, 12 Sep 2019 11:38:20 +0300 Subject: net/mlx5: DR, Remove redundant vport number from action The vport number is part of the vport_cap, there is no reason to store in a separate variable on the vport. Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality") Signed-off-by: Alex Vesker Reviewed-by: Maor Gottlieb Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c | 4 ++-- drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h | 1 - 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c index 7d81a7735de5..b74b7d0f6590 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c @@ -615,7 +615,7 @@ static int dr_action_handle_cs_recalc(struct mlx5dr_domain *dmn, * that recalculates the CS and forwards to the vport. */ ret = mlx5dr_domain_cache_get_recalc_cs_ft_addr(dest_action->vport.dmn, - dest_action->vport.num, + dest_action->vport.caps->num, final_icm_addr); if (ret) { mlx5dr_err(dmn, "Failed to get FW cs recalc flow table\n"); @@ -744,7 +744,7 @@ int mlx5dr_actions_build_ste_arr(struct mlx5dr_matcher *matcher, dest_action = action; if (rx_rule) { /* Loopback on WIRE vport is not supported */ - if (action->vport.num == WIRE_PORT) + if (action->vport.caps->num == WIRE_PORT) goto out_invalid_arg; attr.final_icm_addr = action->vport.caps->icm_address_rx; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h index a37ee6359be2..78f899fb3305 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h @@ -745,7 +745,6 @@ struct mlx5dr_action { struct { struct mlx5dr_domain *dmn; struct mlx5dr_cmd_vport_cap *caps; - u32 num; } vport; struct { u32 vlan_hdr; /* tpid_pcp_dei_vid */ -- cgit v1.2.1 From 48cbde4bd2c7c028a7205cb83386bb345c315adc Mon Sep 17 00:00:00 2001 From: Alex Vesker Date: Thu, 19 Sep 2019 11:24:19 +0300 Subject: net/mlx5: DR, Fix getting incorrect prev node in ste_free When we free an STE and the STE is in the middle of collision list, the prev_ste was obtained incorrectly from the list. To avoid such issues list_entry calls replaced with standard list API. Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Alex Vesker Signed-off-by: Saeed Mahameed --- .../net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c | 10 ++++------ drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c | 14 +++++--------- 3 files changed, 10 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c index 01008cd66f75..9c2c25356dd0 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c @@ -458,13 +458,11 @@ static int dr_matcher_add_to_tbl(struct mlx5dr_matcher *matcher) prev_matcher = NULL; if (next_matcher && !first) - prev_matcher = list_entry(next_matcher->matcher_list.prev, - struct mlx5dr_matcher, - matcher_list); + prev_matcher = list_prev_entry(next_matcher, matcher_list); else if (!first) - prev_matcher = list_entry(tbl->matcher_list.prev, - struct mlx5dr_matcher, - matcher_list); + prev_matcher = list_last_entry(&tbl->matcher_list, + struct mlx5dr_matcher, + matcher_list); if (dmn->type == MLX5DR_DOMAIN_TYPE_FDB || dmn->type == MLX5DR_DOMAIN_TYPE_NIC_RX) { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c index 3bc3f66b8fa8..4187f2b112b8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_rule.c @@ -18,7 +18,7 @@ static int dr_rule_append_to_miss_list(struct mlx5dr_ste *new_last_ste, struct mlx5dr_ste *last_ste; /* The new entry will be inserted after the last */ - last_ste = list_entry(miss_list->prev, struct mlx5dr_ste, miss_list_node); + last_ste = list_last_entry(miss_list, struct mlx5dr_ste, miss_list_node); WARN_ON(!last_ste); ste_info_last = kzalloc(sizeof(*ste_info_last), GFP_KERNEL); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c index 6b0af64536d8..95b7221f5730 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c @@ -429,12 +429,9 @@ static void dr_ste_remove_middle_ste(struct mlx5dr_ste *ste, struct mlx5dr_ste *prev_ste; u64 miss_addr; - prev_ste = list_entry(mlx5dr_ste_get_miss_list(ste)->prev, struct mlx5dr_ste, - miss_list_node); - if (!prev_ste) { - WARN_ON(true); + prev_ste = list_prev_entry(ste, miss_list_node); + if (WARN_ON(!prev_ste)) return; - } miss_addr = mlx5dr_ste_get_miss_addr(ste->hw_ste); mlx5dr_ste_set_miss_addr(prev_ste->hw_ste, miss_addr); @@ -461,8 +458,8 @@ void mlx5dr_ste_free(struct mlx5dr_ste *ste, struct mlx5dr_ste_htbl *stats_tbl; LIST_HEAD(send_ste_list); - first_ste = list_entry(mlx5dr_ste_get_miss_list(ste)->next, - struct mlx5dr_ste, miss_list_node); + first_ste = list_first_entry(mlx5dr_ste_get_miss_list(ste), + struct mlx5dr_ste, miss_list_node); stats_tbl = first_ste->htbl; /* Two options: @@ -479,8 +476,7 @@ void mlx5dr_ste_free(struct mlx5dr_ste *ste, if (last_ste == first_ste) next_ste = NULL; else - next_ste = list_entry(ste->miss_list_node.next, - struct mlx5dr_ste, miss_list_node); + next_ste = list_next_entry(ste, miss_list_node); if (!next_ste) { /* One and only entry in the list */ -- cgit v1.2.1 From 640bdb1fdb4ee42fa469c7842e0fac7b0ada7b9d Mon Sep 17 00:00:00 2001 From: Alaa Hleihel Date: Wed, 18 Sep 2019 12:23:10 +0300 Subject: net/mlx5: DR, Allow matching on vport based on vhca_id In case source_eswitch_owner_vhca_id is given as a match, the source_vport (vhca_id) will be set in case vhca_id_valid. This will allow matching on peer vports, vports that belong to the other pf. Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Alaa Hleihel Signed-off-by: Alex Vesker Signed-off-by: Saeed Mahameed --- .../mellanox/mlx5/core/steering/dr_matcher.c | 3 +- .../ethernet/mellanox/mlx5/core/steering/dr_ste.c | 36 +++++++++++++++++++--- .../mellanox/mlx5/core/steering/dr_types.h | 6 ++-- 3 files changed, 37 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c index 9c2c25356dd0..67dea7698fc9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_matcher.c @@ -230,8 +230,7 @@ static int dr_matcher_set_ste_builders(struct mlx5dr_matcher *matcher, (dmn->type == MLX5DR_DOMAIN_TYPE_FDB || dmn->type == MLX5DR_DOMAIN_TYPE_NIC_RX)) { ret = mlx5dr_ste_build_src_gvmi_qpn(&sb[idx++], &mask, - &dmn->info.caps, - inner, rx); + dmn, inner, rx); if (ret) return ret; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c index 95b7221f5730..4efe1b0be4a8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_ste.c @@ -837,6 +837,8 @@ static void dr_ste_copy_mask_misc(char *mask, struct mlx5dr_match_misc *spec) spec->source_sqn = MLX5_GET(fte_match_set_misc, mask, source_sqn); spec->source_port = MLX5_GET(fte_match_set_misc, mask, source_port); + spec->source_eswitch_owner_vhca_id = MLX5_GET(fte_match_set_misc, mask, + source_eswitch_owner_vhca_id); spec->outer_second_prio = MLX5_GET(fte_match_set_misc, mask, outer_second_prio); spec->outer_second_cfi = MLX5_GET(fte_match_set_misc, mask, outer_second_cfi); @@ -2250,11 +2252,18 @@ static int dr_ste_build_src_gvmi_qpn_bit_mask(struct mlx5dr_match_param *value, { struct mlx5dr_match_misc *misc_mask = &value->misc; - if (misc_mask->source_port != 0xffff) + /* Partial misc source_port is not supported */ + if (misc_mask->source_port && misc_mask->source_port != 0xffff) + return -EINVAL; + + /* Partial misc source_eswitch_owner_vhca_id is not supported */ + if (misc_mask->source_eswitch_owner_vhca_id && + misc_mask->source_eswitch_owner_vhca_id != 0xffff) return -EINVAL; DR_STE_SET_MASK(src_gvmi_qp, bit_mask, source_gvmi, misc_mask, source_port); DR_STE_SET_MASK(src_gvmi_qp, bit_mask, source_qp, misc_mask, source_sqn); + misc_mask->source_eswitch_owner_vhca_id = 0; return 0; } @@ -2266,17 +2275,33 @@ static int dr_ste_build_src_gvmi_qpn_tag(struct mlx5dr_match_param *value, struct dr_hw_ste_format *hw_ste = (struct dr_hw_ste_format *)hw_ste_p; struct mlx5dr_match_misc *misc = &value->misc; struct mlx5dr_cmd_vport_cap *vport_cap; + struct mlx5dr_domain *dmn = sb->dmn; + struct mlx5dr_cmd_caps *caps; u8 *tag = hw_ste->tag; DR_STE_SET_TAG(src_gvmi_qp, tag, source_qp, misc, source_sqn); - vport_cap = mlx5dr_get_vport_cap(sb->caps, misc->source_port); + if (sb->vhca_id_valid) { + /* Find port GVMI based on the eswitch_owner_vhca_id */ + if (misc->source_eswitch_owner_vhca_id == dmn->info.caps.gvmi) + caps = &dmn->info.caps; + else if (dmn->peer_dmn && (misc->source_eswitch_owner_vhca_id == + dmn->peer_dmn->info.caps.gvmi)) + caps = &dmn->peer_dmn->info.caps; + else + return -EINVAL; + } else { + caps = &dmn->info.caps; + } + + vport_cap = mlx5dr_get_vport_cap(caps, misc->source_port); if (!vport_cap) return -EINVAL; if (vport_cap->vport_gvmi) MLX5_SET(ste_src_gvmi_qp, tag, source_gvmi, vport_cap->vport_gvmi); + misc->source_eswitch_owner_vhca_id = 0; misc->source_port = 0; return 0; @@ -2284,17 +2309,20 @@ static int dr_ste_build_src_gvmi_qpn_tag(struct mlx5dr_match_param *value, int mlx5dr_ste_build_src_gvmi_qpn(struct mlx5dr_ste_build *sb, struct mlx5dr_match_param *mask, - struct mlx5dr_cmd_caps *caps, + struct mlx5dr_domain *dmn, bool inner, bool rx) { int ret; + /* Set vhca_id_valid before we reset source_eswitch_owner_vhca_id */ + sb->vhca_id_valid = mask->misc.source_eswitch_owner_vhca_id; + ret = dr_ste_build_src_gvmi_qpn_bit_mask(mask, sb->bit_mask); if (ret) return ret; sb->rx = rx; - sb->caps = caps; + sb->dmn = dmn; sb->inner = inner; sb->lu_type = MLX5DR_STE_LU_TYPE_SRC_GVMI_AND_QP; sb->byte_mask = dr_ste_conv_bit_to_byte_mask(sb->bit_mask); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h index 78f899fb3305..1cb3769d4e3c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h @@ -180,6 +180,8 @@ void mlx5dr_send_fill_and_append_ste_send_info(struct mlx5dr_ste *ste, u16 size, struct mlx5dr_ste_build { u8 inner:1; u8 rx:1; + u8 vhca_id_valid:1; + struct mlx5dr_domain *dmn; struct mlx5dr_cmd_caps *caps; u8 lu_type; u16 byte_mask; @@ -331,7 +333,7 @@ void mlx5dr_ste_build_register_1(struct mlx5dr_ste_build *sb, bool inner, bool rx); int mlx5dr_ste_build_src_gvmi_qpn(struct mlx5dr_ste_build *sb, struct mlx5dr_match_param *mask, - struct mlx5dr_cmd_caps *caps, + struct mlx5dr_domain *dmn, bool inner, bool rx); void mlx5dr_ste_build_empty_always_hit(struct mlx5dr_ste_build *sb, bool rx); @@ -453,7 +455,7 @@ struct mlx5dr_match_misc { u32 gre_c_present:1; /* Source port.;0xffff determines wire port */ u32 source_port:16; - u32 reserved_auto2:16; + u32 source_eswitch_owner_vhca_id:16; /* VLAN ID of first VLAN tag the inner header of the incoming packet. * Valid only when inner_second_cvlan_tag ==1 or inner_second_svlan_tag ==1 */ -- cgit v1.2.1 From d19a79ee38c8fda6d297e4227e80db8bf51c71a6 Mon Sep 17 00:00:00 2001 From: Bodong Wang Date: Mon, 26 Aug 2019 16:34:12 -0500 Subject: net/mlx5: Add device ID of upcoming BlueField-2 Add the device ID of upcoming BlueField-2 integrated ConnectX-6 Dx network controller. Its VFs will be using the generic VF device ID: 0x101e "ConnectX Family mlx5Gen Virtual Function". Fixes: 2e9d3e83ab82 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Bodong Wang Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 9648c2297803..e47dd7c1b909 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1568,6 +1568,7 @@ static const struct pci_device_id mlx5_core_pci_table[] = { { PCI_VDEVICE(MELLANOX, 0x101e), MLX5_PCI_DEV_IS_VF}, /* ConnectX Family mlx5Gen Virtual Function */ { PCI_VDEVICE(MELLANOX, 0xa2d2) }, /* BlueField integrated ConnectX-5 network controller */ { PCI_VDEVICE(MELLANOX, 0xa2d3), MLX5_PCI_DEV_IS_VF}, /* BlueField integrated ConnectX-5 network controller VF */ + { PCI_VDEVICE(MELLANOX, 0xa2d6) }, /* BlueField-2 integrated ConnectX-6 Dx network controller */ { 0, } }; -- cgit v1.2.1 From d22fcc806b84b9818de08b32e494f3c05dd236c7 Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Wed, 11 Sep 2019 07:50:13 -0700 Subject: net/mlx5e: Fix traffic duplication in ethtool steering Before this patch, when adding multiple ethtool steering rules with identical classification, the driver used to append the new destination to the already existing hw rule, which caused the hw to forward the traffic to all destinations (rx queues). Here we avoid this by setting the "no append" mlx5 fs core flag when adding a new ethtool rule. Fixes: 6dc6071cfcde ("net/mlx5e: Add ethtool flow steering support") Signed-off-by: Saeed Mahameed Reviewed-by: Maor Gottlieb Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c index eed7101e8bb7..acd946f2ddbe 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c @@ -399,10 +399,10 @@ add_ethtool_flow_rule(struct mlx5e_priv *priv, struct mlx5_flow_table *ft, struct ethtool_rx_flow_spec *fs) { + struct mlx5_flow_act flow_act = { .flags = FLOW_ACT_NO_APPEND }; struct mlx5_flow_destination *dst = NULL; - struct mlx5_flow_act flow_act = {0}; - struct mlx5_flow_spec *spec; struct mlx5_flow_handle *rule; + struct mlx5_flow_spec *spec; int err = 0; spec = kvzalloc(sizeof(*spec), GFP_KERNEL); -- cgit v1.2.1 From fe1587a7de94912ed75ba5ddbfabf0741f9f8239 Mon Sep 17 00:00:00 2001 From: Dmytro Linkin Date: Fri, 13 Sep 2019 10:42:21 +0000 Subject: net/mlx5e: Fix matching on tunnel addresses type In mlx5 parse_tunnel_attr() function dispatch on encap IP address type is performed by directly checking flow_rule_match_key() on FLOW_DISSECTOR_KEY_ENC_IPV4_ADDRS, and then on FLOW_DISSECTOR_KEY_ENC_IPV6_ADDRS. However, since those are stored in union, first check is always true if any type of encap address is set, which leads to IPv6 tunnel encap address being parsed as IPv4 by mlx5. Determine correct IP address type by checking control key first and if it set, take address type from match.key->addr_type. Fixes: d1bda7eecd88 ("net/mlx5e: Allow matching only enc_key_id/enc_dst_port for decapsulation action") Signed-off-by: Dmytro Linkin Reviewed-by: Vlad Buslov Reviewed-by: Eli Britstein Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 89 +++++++++++++++---------- 1 file changed, 53 insertions(+), 36 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index da7555fdb4d5..3e78a727f3e6 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -1664,46 +1664,63 @@ static int parse_tunnel_attr(struct mlx5e_priv *priv, return err; } - if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ENC_IPV4_ADDRS)) { - struct flow_match_ipv4_addrs match; + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ENC_CONTROL)) { + struct flow_match_control match; + u16 addr_type; - flow_rule_match_enc_ipv4_addrs(rule, &match); - MLX5_SET(fte_match_set_lyr_2_4, headers_c, - src_ipv4_src_ipv6.ipv4_layout.ipv4, - ntohl(match.mask->src)); - MLX5_SET(fte_match_set_lyr_2_4, headers_v, - src_ipv4_src_ipv6.ipv4_layout.ipv4, - ntohl(match.key->src)); - - MLX5_SET(fte_match_set_lyr_2_4, headers_c, - dst_ipv4_dst_ipv6.ipv4_layout.ipv4, - ntohl(match.mask->dst)); - MLX5_SET(fte_match_set_lyr_2_4, headers_v, - dst_ipv4_dst_ipv6.ipv4_layout.ipv4, - ntohl(match.key->dst)); - - MLX5_SET_TO_ONES(fte_match_set_lyr_2_4, headers_c, ethertype); - MLX5_SET(fte_match_set_lyr_2_4, headers_v, ethertype, ETH_P_IP); - } else if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ENC_IPV6_ADDRS)) { - struct flow_match_ipv6_addrs match; + flow_rule_match_enc_control(rule, &match); + addr_type = match.key->addr_type; - flow_rule_match_enc_ipv6_addrs(rule, &match); - memcpy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_c, - src_ipv4_src_ipv6.ipv6_layout.ipv6), - &match.mask->src, MLX5_FLD_SZ_BYTES(ipv6_layout, ipv6)); - memcpy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v, - src_ipv4_src_ipv6.ipv6_layout.ipv6), - &match.key->src, MLX5_FLD_SZ_BYTES(ipv6_layout, ipv6)); + /* For tunnel addr_type used same key id`s as for non-tunnel */ + if (addr_type == FLOW_DISSECTOR_KEY_IPV4_ADDRS) { + struct flow_match_ipv4_addrs match; - memcpy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_c, - dst_ipv4_dst_ipv6.ipv6_layout.ipv6), - &match.mask->dst, MLX5_FLD_SZ_BYTES(ipv6_layout, ipv6)); - memcpy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v, - dst_ipv4_dst_ipv6.ipv6_layout.ipv6), - &match.key->dst, MLX5_FLD_SZ_BYTES(ipv6_layout, ipv6)); + flow_rule_match_enc_ipv4_addrs(rule, &match); + MLX5_SET(fte_match_set_lyr_2_4, headers_c, + src_ipv4_src_ipv6.ipv4_layout.ipv4, + ntohl(match.mask->src)); + MLX5_SET(fte_match_set_lyr_2_4, headers_v, + src_ipv4_src_ipv6.ipv4_layout.ipv4, + ntohl(match.key->src)); - MLX5_SET_TO_ONES(fte_match_set_lyr_2_4, headers_c, ethertype); - MLX5_SET(fte_match_set_lyr_2_4, headers_v, ethertype, ETH_P_IPV6); + MLX5_SET(fte_match_set_lyr_2_4, headers_c, + dst_ipv4_dst_ipv6.ipv4_layout.ipv4, + ntohl(match.mask->dst)); + MLX5_SET(fte_match_set_lyr_2_4, headers_v, + dst_ipv4_dst_ipv6.ipv4_layout.ipv4, + ntohl(match.key->dst)); + + MLX5_SET_TO_ONES(fte_match_set_lyr_2_4, headers_c, + ethertype); + MLX5_SET(fte_match_set_lyr_2_4, headers_v, ethertype, + ETH_P_IP); + } else if (addr_type == FLOW_DISSECTOR_KEY_IPV6_ADDRS) { + struct flow_match_ipv6_addrs match; + + flow_rule_match_enc_ipv6_addrs(rule, &match); + memcpy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_c, + src_ipv4_src_ipv6.ipv6_layout.ipv6), + &match.mask->src, MLX5_FLD_SZ_BYTES(ipv6_layout, + ipv6)); + memcpy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v, + src_ipv4_src_ipv6.ipv6_layout.ipv6), + &match.key->src, MLX5_FLD_SZ_BYTES(ipv6_layout, + ipv6)); + + memcpy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_c, + dst_ipv4_dst_ipv6.ipv6_layout.ipv6), + &match.mask->dst, MLX5_FLD_SZ_BYTES(ipv6_layout, + ipv6)); + memcpy(MLX5_ADDR_OF(fte_match_set_lyr_2_4, headers_v, + dst_ipv4_dst_ipv6.ipv6_layout.ipv6), + &match.key->dst, MLX5_FLD_SZ_BYTES(ipv6_layout, + ipv6)); + + MLX5_SET_TO_ONES(fte_match_set_lyr_2_4, headers_c, + ethertype); + MLX5_SET(fte_match_set_lyr_2_4, headers_v, ethertype, + ETH_P_IPV6); + } } if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ENC_IP)) { -- cgit v1.2.1 From b91ee4aa2a2199ba4d4650706c272985a5a32d80 Mon Sep 17 00:00:00 2001 From: Ori Nimron Date: Fri, 20 Sep 2019 09:35:45 +0200 Subject: mISDN: enforce CAP_NET_RAW for raw sockets When creating a raw AF_ISDN socket, CAP_NET_RAW needs to be checked first. Signed-off-by: Ori Nimron Signed-off-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- drivers/isdn/mISDN/socket.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c index c6ba37df4b9d..dff4132b3702 100644 --- a/drivers/isdn/mISDN/socket.c +++ b/drivers/isdn/mISDN/socket.c @@ -754,6 +754,8 @@ base_sock_create(struct net *net, struct socket *sock, int protocol, int kern) if (sock->type != SOCK_RAW) return -ESOCKTNOSUPPORT; + if (!capable(CAP_NET_RAW)) + return -EPERM; sk = sk_alloc(net, PF_ISDN, GFP_KERNEL, &mISDN_proto, kern); if (!sk) -- cgit v1.2.1 From 9d4d0d06bbf9f7e576b0ebbb2f77672d0fc7f503 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sun, 22 Sep 2019 15:36:03 +0200 Subject: mt76: mt7615: fix mt7615 firmware path definitions mt7615 patch/n9/cr4 firmwares are available in mediatek folder in linux-firmware repository. Because of this mt7615 won't work on regular distributions like Ubuntu. Fix path definitions. Moreover remove useless firmware name pointers and use definitions directly Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Cc: stable@vger.kernel.org Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo --- drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 11 ++++------- drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h | 6 +++--- 2 files changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c index 275d5eaed3b7..842cd81704db 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c @@ -333,7 +333,6 @@ static int mt7615_driver_own(struct mt7615_dev *dev) static int mt7615_load_patch(struct mt7615_dev *dev) { - const char *firmware = MT7615_ROM_PATCH; const struct mt7615_patch_hdr *hdr; const struct firmware *fw = NULL; int len, ret, sem; @@ -349,7 +348,7 @@ static int mt7615_load_patch(struct mt7615_dev *dev) return -EAGAIN; } - ret = request_firmware(&fw, firmware, dev->mt76.dev); + ret = request_firmware(&fw, MT7615_ROM_PATCH, dev->mt76.dev); if (ret) goto out; @@ -447,13 +446,11 @@ mt7615_mcu_send_ram_firmware(struct mt7615_dev *dev, static int mt7615_load_ram(struct mt7615_dev *dev) { - const struct firmware *fw; const struct mt7615_fw_trailer *hdr; - const char *n9_firmware = MT7615_FIRMWARE_N9; - const char *cr4_firmware = MT7615_FIRMWARE_CR4; + const struct firmware *fw; int ret; - ret = request_firmware(&fw, n9_firmware, dev->mt76.dev); + ret = request_firmware(&fw, MT7615_FIRMWARE_N9, dev->mt76.dev); if (ret) return ret; @@ -482,7 +479,7 @@ static int mt7615_load_ram(struct mt7615_dev *dev) release_firmware(fw); - ret = request_firmware(&fw, cr4_firmware, dev->mt76.dev); + ret = request_firmware(&fw, MT7615_FIRMWARE_CR4, dev->mt76.dev); if (ret) return ret; diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h index cef3fd43cb00..7963e302d705 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h @@ -26,9 +26,9 @@ #define MT7615_RX_RING_SIZE 1024 #define MT7615_RX_MCU_RING_SIZE 512 -#define MT7615_FIRMWARE_CR4 "mt7615_cr4.bin" -#define MT7615_FIRMWARE_N9 "mt7615_n9.bin" -#define MT7615_ROM_PATCH "mt7615_rom_patch.bin" +#define MT7615_FIRMWARE_CR4 "mediatek/mt7615_cr4.bin" +#define MT7615_FIRMWARE_N9 "mediatek/mt7615_n9.bin" +#define MT7615_ROM_PATCH "mediatek/mt7615_rom_patch.bin" #define MT7615_EEPROM_SIZE 1024 #define MT7615_TOKEN_SIZE 4096 -- cgit v1.2.1 From fddbfeece9c7882cc47754c7da460fe427e3e85b Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Tue, 24 Sep 2019 13:30:57 +0300 Subject: iwlwifi: fw: don't send GEO_TX_POWER_LIMIT command to FW version 36 The intention was to have the GEO_TX_POWER_LIMIT command in FW version 36 as well, but not all 8000 family got this feature enabled. The 8000 family is the only one using version 36, so skip this version entirely. If we try to send this command to the firmwares that do not support it, we get a BAD_COMMAND response from the firmware. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=204151. Cc: stable@vger.kernel.org # 4.19+ Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo --- drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c index 014eca6596e2..32a5e4e5461f 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c @@ -889,11 +889,13 @@ static bool iwl_mvm_sar_geo_support(struct iwl_mvm *mvm) * firmware versions. Unfortunately, we don't have a TLV API * flag to rely on, so rely on the major version which is in * the first byte of ucode_ver. This was implemented - * initially on version 38 and then backported to 36, 29 and - * 17. + * initially on version 38 and then backported to29 and 17. + * The intention was to have it in 36 as well, but not all + * 8000 family got this feature enabled. The 8000 family is + * the only one using version 36, so skip this version + * entirely. */ return IWL_UCODE_SERIAL(mvm->fw->ucode_ver) >= 38 || - IWL_UCODE_SERIAL(mvm->fw->ucode_ver) == 36 || IWL_UCODE_SERIAL(mvm->fw->ucode_ver) == 29 || IWL_UCODE_SERIAL(mvm->fw->ucode_ver) == 17; } -- cgit v1.2.1 From 02a07046834e64970f3bcd87a422ac2b0adb80de Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 20 Sep 2019 16:08:21 +0200 Subject: arcnet: provide a buffer big enough to actually receive packets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit struct archdr is only big enough to hold the header of various types of arcnet packets. So to provide enough space to hold the data read from hardware provide a buffer large enough to hold a packet with maximal size. The problem was noticed by the stack protector which makes the kernel oops. Signed-off-by: Uwe Kleine-König Acked-by: Michael Grzeschik Signed-off-by: David S. Miller --- drivers/net/arcnet/arcnet.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c index 8459115d9d4e..553776cc1d29 100644 --- a/drivers/net/arcnet/arcnet.c +++ b/drivers/net/arcnet/arcnet.c @@ -1063,31 +1063,34 @@ EXPORT_SYMBOL(arcnet_interrupt); static void arcnet_rx(struct net_device *dev, int bufnum) { struct arcnet_local *lp = netdev_priv(dev); - struct archdr pkt; + union { + struct archdr pkt; + char buf[512]; + } rxdata; struct arc_rfc1201 *soft; int length, ofs; - soft = &pkt.soft.rfc1201; + soft = &rxdata.pkt.soft.rfc1201; - lp->hw.copy_from_card(dev, bufnum, 0, &pkt, ARC_HDR_SIZE); - if (pkt.hard.offset[0]) { - ofs = pkt.hard.offset[0]; + lp->hw.copy_from_card(dev, bufnum, 0, &rxdata.pkt, ARC_HDR_SIZE); + if (rxdata.pkt.hard.offset[0]) { + ofs = rxdata.pkt.hard.offset[0]; length = 256 - ofs; } else { - ofs = pkt.hard.offset[1]; + ofs = rxdata.pkt.hard.offset[1]; length = 512 - ofs; } /* get the full header, if possible */ - if (sizeof(pkt.soft) <= length) { - lp->hw.copy_from_card(dev, bufnum, ofs, soft, sizeof(pkt.soft)); + if (sizeof(rxdata.pkt.soft) <= length) { + lp->hw.copy_from_card(dev, bufnum, ofs, soft, sizeof(rxdata.pkt.soft)); } else { - memset(&pkt.soft, 0, sizeof(pkt.soft)); + memset(&rxdata.pkt.soft, 0, sizeof(rxdata.pkt.soft)); lp->hw.copy_from_card(dev, bufnum, ofs, soft, length); } arc_printk(D_DURING, dev, "Buffer #%d: received packet from %02Xh to %02Xh (%d+4 bytes)\n", - bufnum, pkt.hard.source, pkt.hard.dest, length); + bufnum, rxdata.pkt.hard.source, rxdata.pkt.hard.dest, length); dev->stats.rx_packets++; dev->stats.rx_bytes += length + ARC_HDR_SIZE; @@ -1096,13 +1099,13 @@ static void arcnet_rx(struct net_device *dev, int bufnum) if (arc_proto_map[soft->proto]->is_ip) { if (BUGLVL(D_PROTO)) { struct ArcProto - *oldp = arc_proto_map[lp->default_proto[pkt.hard.source]], + *oldp = arc_proto_map[lp->default_proto[rxdata.pkt.hard.source]], *newp = arc_proto_map[soft->proto]; if (oldp != newp) { arc_printk(D_PROTO, dev, "got protocol %02Xh; encap for host %02Xh is now '%c' (was '%c')\n", - soft->proto, pkt.hard.source, + soft->proto, rxdata.pkt.hard.source, newp->suffix, oldp->suffix); } } @@ -1111,10 +1114,10 @@ static void arcnet_rx(struct net_device *dev, int bufnum) lp->default_proto[0] = soft->proto; /* in striking contrast, the following isn't a hack. */ - lp->default_proto[pkt.hard.source] = soft->proto; + lp->default_proto[rxdata.pkt.hard.source] = soft->proto; } /* call the protocol-specific receiver. */ - arc_proto_map[soft->proto]->rx(dev, bufnum, &pkt, length); + arc_proto_map[soft->proto]->rx(dev, bufnum, &rxdata.pkt, length); } static void null_rx(struct net_device *dev, int bufnum, -- cgit v1.2.1 From 5aafeb74b5bb65b34cc87c7623f9fa163a34fa3b Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 20 Sep 2019 18:18:26 +0200 Subject: skge: fix checksum byte order Running old skge driver on PowerPC causes checksum errors because hardware reported 1's complement checksum is in little-endian byte order. Reported-by: Benoit Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/skge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index 0a2ec387a482..095f6c71b4fa 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -3108,7 +3108,7 @@ static struct sk_buff *skge_rx_get(struct net_device *dev, skb_put(skb, len); if (dev->features & NETIF_F_RXCSUM) { - skb->csum = csum; + skb->csum = le16_to_cpu(csum); skb->ip_summed = CHECKSUM_COMPLETE; } -- cgit v1.2.1 From 2b481835cf4e7384b80d7762074b32a45b792d99 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 21 Sep 2019 09:01:45 +0300 Subject: wil6210: use after free in wil_netif_rx_any() The debug code dereferences "skb" to print "skb->len" so we have to print the message before we free "skb". Fixes: f99fe49ff372 ("wil6210: add wil_netif_rx() helper function") Signed-off-by: Dan Carpenter Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/wil6210/txrx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index cb13652491ad..598c1fba9dac 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -1012,11 +1012,11 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev) skb_orphan(skb); if (security && (wil->txrx_ops.rx_crypto_check(wil, skb) != 0)) { + wil_dbg_txrx(wil, "Rx drop %d bytes\n", skb->len); dev_kfree_skb(skb); ndev->stats.rx_dropped++; stats->rx_replay++; stats->rx_dropped++; - wil_dbg_txrx(wil, "Rx drop %d bytes\n", skb->len); return; } -- cgit v1.2.1 From b27507bb59ed504d7fa4d6a35f25a8cc39903b54 Mon Sep 17 00:00:00 2001 From: Juliet Kim Date: Fri, 20 Sep 2019 16:11:22 -0400 Subject: net/ibmvnic: unlock rtnl_lock in reset so linkwatch_event can run Commit a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset") made the change to hold the RTNL lock during a reset to avoid deadlock but linkwatch_event is fired during the reset and needs the RTNL lock. That keeps linkwatch_event process from proceeding until the reset is complete. The reset process cannot tolerate the linkwatch_event processing after reset completes, so release the RTNL lock during the process to allow a chance for linkwatch_event to run during reset. This does not guarantee that the linkwatch_event will be processed as soon as link state changes, but is an improvement over the current code where linkwatch_event processing is always delayed, which prevents transmissions on the device from being deactivated leading transmit watchdog timer to time-out. Release the RTNL lock before link state change and re-acquire after the link state change to allow linkwatch_event to grab the RTNL lock and run during the reset. Fixes: a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset") Signed-off-by: Juliet Kim Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 224 ++++++++++++++++++++++++++----------- drivers/net/ethernet/ibm/ibmvnic.h | 1 + 2 files changed, 157 insertions(+), 68 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 3816fff75bb5..d7db5cc51f6a 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1723,6 +1723,86 @@ static int ibmvnic_set_mac(struct net_device *netdev, void *p) return rc; } +/** + * do_change_param_reset returns zero if we are able to keep processing reset + * events, or non-zero if we hit a fatal error and must halt. + */ +static int do_change_param_reset(struct ibmvnic_adapter *adapter, + struct ibmvnic_rwi *rwi, + u32 reset_state) +{ + struct net_device *netdev = adapter->netdev; + int i, rc; + + netdev_dbg(adapter->netdev, "Change param resetting driver (%d)\n", + rwi->reset_reason); + + netif_carrier_off(netdev); + adapter->reset_reason = rwi->reset_reason; + + ibmvnic_cleanup(netdev); + + if (reset_state == VNIC_OPEN) { + rc = __ibmvnic_close(netdev); + if (rc) + return rc; + } + + release_resources(adapter); + release_sub_crqs(adapter, 1); + release_crq_queue(adapter); + + adapter->state = VNIC_PROBED; + + rc = init_crq_queue(adapter); + + if (rc) { + netdev_err(adapter->netdev, + "Couldn't initialize crq. rc=%d\n", rc); + return rc; + } + + rc = ibmvnic_reset_init(adapter); + if (rc) + return IBMVNIC_INIT_FAILED; + + /* If the adapter was in PROBE state prior to the reset, + * exit here. + */ + if (reset_state == VNIC_PROBED) + return 0; + + rc = ibmvnic_login(netdev); + if (rc) { + adapter->state = reset_state; + return rc; + } + + rc = init_resources(adapter); + if (rc) + return rc; + + ibmvnic_disable_irqs(adapter); + + adapter->state = VNIC_CLOSED; + + if (reset_state == VNIC_CLOSED) + return 0; + + rc = __ibmvnic_open(netdev); + if (rc) + return IBMVNIC_OPEN_FAILED; + + /* refresh device's multicast list */ + ibmvnic_set_multi(netdev); + + /* kick napi */ + for (i = 0; i < adapter->req_rx_queues; i++) + napi_schedule(&adapter->napi[i]); + + return 0; +} + /** * do_reset returns zero if we are able to keep processing reset events, or * non-zero if we hit a fatal error and must halt. @@ -1738,6 +1818,8 @@ static int do_reset(struct ibmvnic_adapter *adapter, netdev_dbg(adapter->netdev, "Re-setting driver (%d)\n", rwi->reset_reason); + rtnl_lock(); + netif_carrier_off(netdev); adapter->reset_reason = rwi->reset_reason; @@ -1751,16 +1833,25 @@ static int do_reset(struct ibmvnic_adapter *adapter, if (reset_state == VNIC_OPEN && adapter->reset_reason != VNIC_RESET_MOBILITY && adapter->reset_reason != VNIC_RESET_FAILOVER) { - rc = __ibmvnic_close(netdev); + adapter->state = VNIC_CLOSING; + + /* Release the RTNL lock before link state change and + * re-acquire after the link state change to allow + * linkwatch_event to grab the RTNL lock and run during + * a reset. + */ + rtnl_unlock(); + rc = set_link_state(adapter, IBMVNIC_LOGICAL_LNK_DN); + rtnl_lock(); if (rc) - return rc; - } + goto out; - if (adapter->reset_reason == VNIC_RESET_CHANGE_PARAM || - adapter->wait_for_reset) { - release_resources(adapter); - release_sub_crqs(adapter, 1); - release_crq_queue(adapter); + if (adapter->state != VNIC_CLOSING) { + rc = -1; + goto out; + } + + adapter->state = VNIC_CLOSED; } if (adapter->reset_reason != VNIC_RESET_NON_FATAL) { @@ -1769,9 +1860,7 @@ static int do_reset(struct ibmvnic_adapter *adapter, */ adapter->state = VNIC_PROBED; - if (adapter->wait_for_reset) { - rc = init_crq_queue(adapter); - } else if (adapter->reset_reason == VNIC_RESET_MOBILITY) { + if (adapter->reset_reason == VNIC_RESET_MOBILITY) { rc = ibmvnic_reenable_crq_queue(adapter); release_sub_crqs(adapter, 1); } else { @@ -1783,36 +1872,35 @@ static int do_reset(struct ibmvnic_adapter *adapter, if (rc) { netdev_err(adapter->netdev, "Couldn't initialize crq. rc=%d\n", rc); - return rc; + goto out; } rc = ibmvnic_reset_init(adapter); - if (rc) - return IBMVNIC_INIT_FAILED; + if (rc) { + rc = IBMVNIC_INIT_FAILED; + goto out; + } /* If the adapter was in PROBE state prior to the reset, * exit here. */ - if (reset_state == VNIC_PROBED) - return 0; + if (reset_state == VNIC_PROBED) { + rc = 0; + goto out; + } rc = ibmvnic_login(netdev); if (rc) { adapter->state = reset_state; - return rc; + goto out; } - if (adapter->reset_reason == VNIC_RESET_CHANGE_PARAM || - adapter->wait_for_reset) { - rc = init_resources(adapter); - if (rc) - return rc; - } else if (adapter->req_rx_queues != old_num_rx_queues || - adapter->req_tx_queues != old_num_tx_queues || - adapter->req_rx_add_entries_per_subcrq != - old_num_rx_slots || - adapter->req_tx_entries_per_subcrq != - old_num_tx_slots) { + if (adapter->req_rx_queues != old_num_rx_queues || + adapter->req_tx_queues != old_num_tx_queues || + adapter->req_rx_add_entries_per_subcrq != + old_num_rx_slots || + adapter->req_tx_entries_per_subcrq != + old_num_tx_slots) { release_rx_pools(adapter); release_tx_pools(adapter); release_napi(adapter); @@ -1820,32 +1908,30 @@ static int do_reset(struct ibmvnic_adapter *adapter, rc = init_resources(adapter); if (rc) - return rc; + goto out; } else { rc = reset_tx_pools(adapter); if (rc) - return rc; + goto out; rc = reset_rx_pools(adapter); if (rc) - return rc; + goto out; } ibmvnic_disable_irqs(adapter); } adapter->state = VNIC_CLOSED; - if (reset_state == VNIC_CLOSED) - return 0; + if (reset_state == VNIC_CLOSED) { + rc = 0; + goto out; + } rc = __ibmvnic_open(netdev); if (rc) { - if (list_empty(&adapter->rwi_list)) - adapter->state = VNIC_CLOSED; - else - adapter->state = reset_state; - - return 0; + rc = IBMVNIC_OPEN_FAILED; + goto out; } /* refresh device's multicast list */ @@ -1855,11 +1941,15 @@ static int do_reset(struct ibmvnic_adapter *adapter, for (i = 0; i < adapter->req_rx_queues; i++) napi_schedule(&adapter->napi[i]); - if (adapter->reset_reason != VNIC_RESET_FAILOVER && - adapter->reset_reason != VNIC_RESET_CHANGE_PARAM) + if (adapter->reset_reason != VNIC_RESET_FAILOVER) call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, netdev); - return 0; + rc = 0; + +out: + rtnl_unlock(); + + return rc; } static int do_hard_reset(struct ibmvnic_adapter *adapter, @@ -1919,14 +2009,8 @@ static int do_hard_reset(struct ibmvnic_adapter *adapter, return 0; rc = __ibmvnic_open(netdev); - if (rc) { - if (list_empty(&adapter->rwi_list)) - adapter->state = VNIC_CLOSED; - else - adapter->state = reset_state; - - return 0; - } + if (rc) + return IBMVNIC_OPEN_FAILED; return 0; } @@ -1965,20 +2049,11 @@ static void __ibmvnic_reset(struct work_struct *work) { struct ibmvnic_rwi *rwi; struct ibmvnic_adapter *adapter; - bool we_lock_rtnl = false; u32 reset_state; int rc = 0; adapter = container_of(work, struct ibmvnic_adapter, ibmvnic_reset); - /* netif_set_real_num_xx_queues needs to take rtnl lock here - * unless wait_for_reset is set, in which case the rtnl lock - * has already been taken before initializing the reset - */ - if (!adapter->wait_for_reset) { - rtnl_lock(); - we_lock_rtnl = true; - } reset_state = adapter->state; rwi = get_next_rwi(adapter); @@ -1990,14 +2065,32 @@ static void __ibmvnic_reset(struct work_struct *work) break; } - if (adapter->force_reset_recovery) { - adapter->force_reset_recovery = false; - rc = do_hard_reset(adapter, rwi, reset_state); + if (rwi->reset_reason == VNIC_RESET_CHANGE_PARAM) { + /* CHANGE_PARAM requestor holds rtnl_lock */ + rc = do_change_param_reset(adapter, rwi, reset_state); + } else if (adapter->force_reset_recovery) { + /* Transport event occurred during previous reset */ + if (adapter->wait_for_reset) { + /* Previous was CHANGE_PARAM; caller locked */ + adapter->force_reset_recovery = false; + rc = do_hard_reset(adapter, rwi, reset_state); + } else { + rtnl_lock(); + adapter->force_reset_recovery = false; + rc = do_hard_reset(adapter, rwi, reset_state); + rtnl_unlock(); + } } else { rc = do_reset(adapter, rwi, reset_state); } kfree(rwi); - if (rc && rc != IBMVNIC_INIT_FAILED && + if (rc == IBMVNIC_OPEN_FAILED) { + if (list_empty(&adapter->rwi_list)) + adapter->state = VNIC_CLOSED; + else + adapter->state = reset_state; + rc = 0; + } else if (rc && rc != IBMVNIC_INIT_FAILED && !adapter->force_reset_recovery) break; @@ -2005,7 +2098,6 @@ static void __ibmvnic_reset(struct work_struct *work) } if (adapter->wait_for_reset) { - adapter->wait_for_reset = false; adapter->reset_done_rc = rc; complete(&adapter->reset_done); } @@ -2016,8 +2108,6 @@ static void __ibmvnic_reset(struct work_struct *work) } adapter->resetting = false; - if (we_lock_rtnl) - rtnl_unlock(); } static int ibmvnic_reset(struct ibmvnic_adapter *adapter, @@ -2078,8 +2168,6 @@ static int ibmvnic_reset(struct ibmvnic_adapter *adapter, return 0; err: - if (adapter->wait_for_reset) - adapter->wait_for_reset = false; return -ret; } diff --git a/drivers/net/ethernet/ibm/ibmvnic.h b/drivers/net/ethernet/ibm/ibmvnic.h index 70bd286f8932..9d3d35cc91d6 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.h +++ b/drivers/net/ethernet/ibm/ibmvnic.h @@ -20,6 +20,7 @@ #define IBMVNIC_INVALID_MAP -1 #define IBMVNIC_STATS_TIMEOUT 1 #define IBMVNIC_INIT_FAILED 2 +#define IBMVNIC_OPEN_FAILED 3 /* basic structures plus 100 2k buffers */ #define IBMVNIC_IO_ENTITLEMENT_DEFAULT 610305 -- cgit v1.2.1 From 7ed5b31f4a6695a21f617df07646e9b15c6c1d29 Mon Sep 17 00:00:00 2001 From: Juliet Kim Date: Fri, 20 Sep 2019 16:11:23 -0400 Subject: net/ibmvnic: prevent more than one thread from running in reset The current code allows more than one thread to run in reset. This can corrupt struct adapter data. Check adapter->resetting before performing a reset, if there is another reset running delay (100 msec) before trying again. Signed-off-by: Juliet Kim Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 40 ++++++++++++++++++++++++++++---------- drivers/net/ethernet/ibm/ibmvnic.h | 5 ++++- 2 files changed, 34 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index d7db5cc51f6a..2b073a3c0b84 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1207,7 +1207,7 @@ static void ibmvnic_cleanup(struct net_device *netdev) struct ibmvnic_adapter *adapter = netdev_priv(netdev); /* ensure that transmissions are stopped if called by do_reset */ - if (adapter->resetting) + if (test_bit(0, &adapter->resetting)) netif_tx_disable(netdev); else netif_tx_stop_all_queues(netdev); @@ -1428,7 +1428,7 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev) u8 proto = 0; netdev_tx_t ret = NETDEV_TX_OK; - if (adapter->resetting) { + if (test_bit(0, &adapter->resetting)) { if (!netif_subqueue_stopped(netdev, skb)) netif_stop_subqueue(netdev, queue_num); dev_kfree_skb_any(skb); @@ -2054,6 +2054,12 @@ static void __ibmvnic_reset(struct work_struct *work) adapter = container_of(work, struct ibmvnic_adapter, ibmvnic_reset); + if (test_and_set_bit_lock(0, &adapter->resetting)) { + schedule_delayed_work(&adapter->ibmvnic_delayed_reset, + IBMVNIC_RESET_DELAY); + return; + } + reset_state = adapter->state; rwi = get_next_rwi(adapter); @@ -2095,6 +2101,10 @@ static void __ibmvnic_reset(struct work_struct *work) break; rwi = get_next_rwi(adapter); + + if (rwi && (rwi->reset_reason == VNIC_RESET_FAILOVER || + rwi->reset_reason == VNIC_RESET_MOBILITY)) + adapter->force_reset_recovery = true; } if (adapter->wait_for_reset) { @@ -2107,7 +2117,16 @@ static void __ibmvnic_reset(struct work_struct *work) free_all_rwi(adapter); } - adapter->resetting = false; + clear_bit_unlock(0, &adapter->resetting); +} + +static void __ibmvnic_delayed_reset(struct work_struct *work) +{ + struct ibmvnic_adapter *adapter; + + adapter = container_of(work, struct ibmvnic_adapter, + ibmvnic_delayed_reset.work); + __ibmvnic_reset(&adapter->ibmvnic_reset); } static int ibmvnic_reset(struct ibmvnic_adapter *adapter, @@ -2162,7 +2181,6 @@ static int ibmvnic_reset(struct ibmvnic_adapter *adapter, rwi->reset_reason = reason; list_add_tail(&rwi->list, &adapter->rwi_list); spin_unlock_irqrestore(&adapter->rwi_lock, flags); - adapter->resetting = true; netdev_dbg(adapter->netdev, "Scheduling reset (reason %d)\n", reason); schedule_work(&adapter->ibmvnic_reset); @@ -2207,7 +2225,7 @@ restart_poll: u16 offset; u8 flags = 0; - if (unlikely(adapter->resetting && + if (unlikely(test_bit(0, &adapter->resetting) && adapter->reset_reason != VNIC_RESET_NON_FATAL)) { enable_scrq_irq(adapter, adapter->rx_scrq[scrq_num]); napi_complete_done(napi, frames_processed); @@ -2858,7 +2876,7 @@ static int enable_scrq_irq(struct ibmvnic_adapter *adapter, return 1; } - if (adapter->resetting && + if (test_bit(0, &adapter->resetting) && adapter->reset_reason == VNIC_RESET_MOBILITY) { u64 val = (0xff000000) | scrq->hw_irq; @@ -3408,7 +3426,7 @@ static int ibmvnic_send_crq(struct ibmvnic_adapter *adapter, if (rc) { if (rc == H_CLOSED) { dev_warn(dev, "CRQ Queue closed\n"); - if (adapter->resetting) + if (test_bit(0, &adapter->resetting)) ibmvnic_reset(adapter, VNIC_RESET_FATAL); } @@ -4484,7 +4502,7 @@ static void ibmvnic_handle_crq(union ibmvnic_crq *crq, case IBMVNIC_CRQ_XPORT_EVENT: netif_carrier_off(netdev); adapter->crq.active = false; - if (adapter->resetting) + if (test_bit(0, &adapter->resetting)) adapter->force_reset_recovery = true; if (gen_crq->cmd == IBMVNIC_PARTITION_MIGRATED) { dev_info(dev, "Migrated, re-enabling adapter\n"); @@ -4822,7 +4840,7 @@ static int ibmvnic_reset_init(struct ibmvnic_adapter *adapter) return -1; } - if (adapter->resetting && !adapter->wait_for_reset && + if (test_bit(0, &adapter->resetting) && !adapter->wait_for_reset && adapter->reset_reason != VNIC_RESET_MOBILITY) { if (adapter->req_rx_queues != old_num_rx_queues || adapter->req_tx_queues != old_num_tx_queues) { @@ -4934,10 +4952,12 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) spin_lock_init(&adapter->stats_lock); INIT_WORK(&adapter->ibmvnic_reset, __ibmvnic_reset); + INIT_DELAYED_WORK(&adapter->ibmvnic_delayed_reset, + __ibmvnic_delayed_reset); INIT_LIST_HEAD(&adapter->rwi_list); spin_lock_init(&adapter->rwi_lock); init_completion(&adapter->init_done); - adapter->resetting = false; + clear_bit(0, &adapter->resetting); do { rc = init_crq_queue(adapter); diff --git a/drivers/net/ethernet/ibm/ibmvnic.h b/drivers/net/ethernet/ibm/ibmvnic.h index 9d3d35cc91d6..ebc39248b334 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.h +++ b/drivers/net/ethernet/ibm/ibmvnic.h @@ -39,6 +39,8 @@ #define IBMVNIC_MAX_LTB_SIZE ((1 << (MAX_ORDER - 1)) * PAGE_SIZE) #define IBMVNIC_BUFFER_HLEN 500 +#define IBMVNIC_RESET_DELAY 100 + static const char ibmvnic_priv_flags[][ETH_GSTRING_LEN] = { #define IBMVNIC_USE_SERVER_MAXES 0x1 "use-server-maxes" @@ -1077,7 +1079,8 @@ struct ibmvnic_adapter { spinlock_t rwi_lock; struct list_head rwi_list; struct work_struct ibmvnic_reset; - bool resetting; + struct delayed_work ibmvnic_delayed_reset; + unsigned long resetting; bool napi_enabled, from_passive_init; bool failover_pending; -- cgit v1.2.1 From 4c247de564f1ff614d11b3bb5313fb70d7b9598b Mon Sep 17 00:00:00 2001 From: Takeshi Misawa Date: Sun, 22 Sep 2019 16:45:31 +0900 Subject: ppp: Fix memory leak in ppp_write When ppp is closing, __ppp_xmit_process() failed to enqueue skb and skb allocated in ppp_write() is leaked. syzbot reported : BUG: memory leak unreferenced object 0xffff88812a17bc00 (size 224): comm "syz-executor673", pid 6952, jiffies 4294942888 (age 13.040s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d110fff9>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<00000000d110fff9>] slab_post_alloc_hook mm/slab.h:522 [inline] [<00000000d110fff9>] slab_alloc_node mm/slab.c:3262 [inline] [<00000000d110fff9>] kmem_cache_alloc_node+0x163/0x2f0 mm/slab.c:3574 [<000000002d616113>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:197 [<000000000167fc45>] alloc_skb include/linux/skbuff.h:1055 [inline] [<000000000167fc45>] ppp_write+0x48/0x120 drivers/net/ppp/ppp_generic.c:502 [<000000009ab42c0b>] __vfs_write+0x43/0xa0 fs/read_write.c:494 [<00000000086b2e22>] vfs_write fs/read_write.c:558 [inline] [<00000000086b2e22>] vfs_write+0xee/0x210 fs/read_write.c:542 [<00000000a2b70ef9>] ksys_write+0x7c/0x130 fs/read_write.c:611 [<00000000ce5e0fdd>] __do_sys_write fs/read_write.c:623 [inline] [<00000000ce5e0fdd>] __se_sys_write fs/read_write.c:620 [inline] [<00000000ce5e0fdd>] __x64_sys_write+0x1e/0x30 fs/read_write.c:620 [<00000000d9d7b370>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296 [<0000000006e6d506>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by freeing skb, if ppp is closing. Fixes: 6d066734e9f0 ("ppp: avoid loop in xmit recursion detection code") Reported-and-tested-by: syzbot+d9c8bf24e56416d7ce2c@syzkaller.appspotmail.com Signed-off-by: Takeshi Misawa Reviewed-by: Guillaume Nault Tested-by: Guillaume Nault Signed-off-by: David S. Miller --- drivers/net/ppp/ppp_generic.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c index a30e41a56085..9a1b006904a7 100644 --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -1415,6 +1415,8 @@ static void __ppp_xmit_process(struct ppp *ppp, struct sk_buff *skb) netif_wake_queue(ppp->dev); else netif_stop_queue(ppp->dev); + } else { + kfree_skb(skb); } ppp_xmit_unlock(ppp); } -- cgit v1.2.1 From 5c94ad1793f1c8743388f329d55a61e5001dc58e Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sun, 22 Sep 2019 13:42:16 +0200 Subject: atm: he: clean up an indentation issue There is a statement that is indented one level too many, remove the extraneous tab. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/atm/he.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/atm/he.c b/drivers/atm/he.c index 70b00ae4ec38..8af793f5e811 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -1690,7 +1690,7 @@ he_service_rbrq(struct he_dev *he_dev, int group) if (RBRQ_HBUF_ERR(he_dev->rbrq_head)) { hprintk("HBUF_ERR! (cid 0x%x)\n", cid); - atomic_inc(&vcc->stats->rx_drop); + atomic_inc(&vcc->stats->rx_drop); goto return_host_buffers; } -- cgit v1.2.1 From 9f5c44cf61a7cf29d85d2c0d2065ab2d62764a41 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Mon, 23 Sep 2019 14:16:03 +0800 Subject: gianfar: Make reset_gfar static Fix sparse warning: drivers/net/ethernet/freescale/gianfar.c:2070:6: warning: symbol 'reset_gfar' was not declared. Should it be static? Reported-by: Hulk Robot Signed-off-by: YueHaibing Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 24bf7f68375f..51ad86417cb1 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -2067,7 +2067,7 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu) return 0; } -void reset_gfar(struct net_device *ndev) +static void reset_gfar(struct net_device *ndev) { struct gfar_private *priv = netdev_priv(ndev); -- cgit v1.2.1 From b0ce902febef24f917c33d5a5982030dac53141d Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Mon, 23 Sep 2019 09:49:08 +0200 Subject: net: stmmac: selftests: Flow Control test can also run with ASYM Pause The Flow Control selftest is also available with ASYM Pause. Lets add this check to the test and fix eventual false positive failures. Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c index 9c8d210b2d6a..5f66f6161629 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c @@ -670,7 +670,7 @@ static int stmmac_test_flowctrl(struct stmmac_priv *priv) unsigned int pkt_count; int i, ret = 0; - if (!phydev || !phydev->pause) + if (!phydev || (!phydev->pause && !phydev->asym_pause)) return -EOPNOTSUPP; tpriv = kzalloc(sizeof(*tpriv), GFP_KERNEL); -- cgit v1.2.1 From 99dcb8432af062fffd5eb81692966a0de9ccc072 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Mon, 23 Sep 2019 14:03:51 +0530 Subject: net: macb: Remove dead code macb_64b_desc is always called when HW_DMA_CAP_64B is defined. So the return NULL can never be reached. Remove the dead code. Signed-off-by: Shubhrajyoti Datta Reviewed-by: Claudiu Beznea Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 35b59b5edf0f..8e8d557901a9 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -165,9 +165,8 @@ static unsigned int macb_adj_dma_desc_idx(struct macb *bp, unsigned int desc_idx #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT static struct macb_dma_desc_64 *macb_64b_desc(struct macb *bp, struct macb_dma_desc *desc) { - if (bp->hw_dma_cap & HW_DMA_CAP_64B) - return (struct macb_dma_desc_64 *)((void *)desc + sizeof(struct macb_dma_desc)); - return NULL; + return (struct macb_dma_desc_64 *)((void *)desc + + sizeof(struct macb_dma_desc)); } #endif -- cgit v1.2.1 From 02bc5eb990597796d8e8383d1b98e540af963bf1 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 23 Sep 2019 17:52:43 +0200 Subject: drivers: net: Fix Kconfig indentation Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski Acked-by: Kalle Valo Reviewed-by: Leon Romanovsky Signed-off-by: David S. Miller --- drivers/net/Kconfig | 2 +- drivers/net/arcnet/Kconfig | 26 +++--- drivers/net/can/usb/Kconfig | 8 +- drivers/net/ethernet/allwinner/Kconfig | 10 +- drivers/net/ethernet/emulex/benet/Kconfig | 2 +- drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 36 ++++---- drivers/net/ethernet/nxp/Kconfig | 8 +- drivers/net/ethernet/pensando/Kconfig | 4 +- drivers/net/phy/Kconfig | 6 +- drivers/net/wireless/ath/Kconfig | 2 +- drivers/net/wireless/ath/ar5523/Kconfig | 4 +- drivers/net/wireless/ath/ath6kl/Kconfig | 2 +- drivers/net/wireless/ath/ath9k/Kconfig | 2 +- drivers/net/wireless/ath/carl9170/Kconfig | 6 +- drivers/net/wireless/atmel/Kconfig | 32 +++---- drivers/net/wireless/intel/ipw2x00/Kconfig | 116 ++++++++++++------------ drivers/net/wireless/intel/iwlegacy/Kconfig | 6 +- drivers/net/wireless/intel/iwlwifi/Kconfig | 6 +- drivers/net/wireless/ralink/rt2x00/Kconfig | 24 ++--- 19 files changed, 151 insertions(+), 151 deletions(-) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 48e209e55843..df1c7989e13d 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -487,7 +487,7 @@ config FUJITSU_ES depends on ACPI help This driver provides support for Extended Socket network device - on Extended Partitioning of FUJITSU PRIMEQUEST 2000 E2 series. + on Extended Partitioning of FUJITSU PRIMEQUEST 2000 E2 series. config THUNDERBOLT_NET tristate "Networking over Thunderbolt cable" diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig index faeb4419b205..27551bf3d7e4 100644 --- a/drivers/net/arcnet/Kconfig +++ b/drivers/net/arcnet/Kconfig @@ -56,19 +56,19 @@ config ARCNET_CAP tristate "Enable CAP mode packet interface" help ARCnet "cap mode" packet encapsulation. Used to get the hardware - acknowledge back to userspace. After the initial protocol byte every - packet is stuffed with an extra 4 byte "cookie" which doesn't - actually appear on the network. After transmit the driver will send - back a packet with protocol byte 0 containing the status of the - transmission: - 0=no hardware acknowledge - 1=excessive nak - 2=transmission accepted by the receiver hardware - - Received packets are also stuffed with the extra 4 bytes but it will - be random data. - - Cap only listens to protocol 1-8. + acknowledge back to userspace. After the initial protocol byte every + packet is stuffed with an extra 4 byte "cookie" which doesn't + actually appear on the network. After transmit the driver will send + back a packet with protocol byte 0 containing the status of the + transmission: + 0=no hardware acknowledge + 1=excessive nak + 2=transmission accepted by the receiver hardware + + Received packets are also stuffed with the extra 4 bytes but it will + be random data. + + Cap only listens to protocol 1-8. config ARCNET_COM90xx tristate "ARCnet COM90xx (normal) chipset driver" diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index 4b3d0ddcda79..b412f7ba4f89 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -15,10 +15,10 @@ config CAN_EMS_USB from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). config CAN_ESD_USB2 - tristate "ESD USB/2 CAN/USB interface" - ---help--- - This driver supports the CAN-USB/2 interface - from esd electronic system design gmbh (http://www.esd.eu). + tristate "ESD USB/2 CAN/USB interface" + ---help--- + This driver supports the CAN-USB/2 interface + from esd electronic system design gmbh (http://www.esd.eu). config CAN_GS_USB tristate "Geschwister Schneider UG interfaces" diff --git a/drivers/net/ethernet/allwinner/Kconfig b/drivers/net/ethernet/allwinner/Kconfig index a5e2bcbf2722..264a482ec31d 100644 --- a/drivers/net/ethernet/allwinner/Kconfig +++ b/drivers/net/ethernet/allwinner/Kconfig @@ -21,17 +21,17 @@ config NET_VENDOR_ALLWINNER if NET_VENDOR_ALLWINNER config SUN4I_EMAC - tristate "Allwinner A10 EMAC support" + tristate "Allwinner A10 EMAC support" depends on ARCH_SUNXI depends on OF select CRC32 select MII select PHYLIB select MDIO_SUN4I - ---help--- - Support for Allwinner A10 EMAC ethernet driver. + ---help--- + Support for Allwinner A10 EMAC ethernet driver. - To compile this driver as a module, choose M here. The module - will be called sun4i-emac. + To compile this driver as a module, choose M here. The module + will be called sun4i-emac. endif # NET_VENDOR_ALLWINNER diff --git a/drivers/net/ethernet/emulex/benet/Kconfig b/drivers/net/ethernet/emulex/benet/Kconfig index e8c7eb842dbe..17d300ea9955 100644 --- a/drivers/net/ethernet/emulex/benet/Kconfig +++ b/drivers/net/ethernet/emulex/benet/Kconfig @@ -48,5 +48,5 @@ config BE2NET_SKYHAWK chipsets. (e.g. OneConnect OCe14xxx) comment "WARNING: be2net is useless without any enabled chip" - depends on BE2NET_BE2=n && BE2NET_BE3=n && BE2NET_LANCER=n && \ + depends on BE2NET_BE2=n && BE2NET_BE3=n && BE2NET_LANCER=n && \ BE2NET_SKYHAWK=n && BE2NET diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig index 0dba272a5b2f..a1f20b205299 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig +++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig @@ -20,15 +20,15 @@ config MLX5_ACCEL bool config MLX5_FPGA - bool "Mellanox Technologies Innova support" - depends on MLX5_CORE + bool "Mellanox Technologies Innova support" + depends on MLX5_CORE select MLX5_ACCEL - ---help--- - Build support for the Innova family of network cards by Mellanox - Technologies. Innova network cards are comprised of a ConnectX chip - and an FPGA chip on one board. If you select this option, the - mlx5_core driver will include the Innova FPGA core and allow building - sandbox-specific client drivers. + ---help--- + Build support for the Innova family of network cards by Mellanox + Technologies. Innova network cards are comprised of a ConnectX chip + and an FPGA chip on one board. If you select this option, the + mlx5_core driver will include the Innova FPGA core and allow building + sandbox-specific client drivers. config MLX5_CORE_EN bool "Mellanox 5th generation network adapters (ConnectX series) Ethernet support" @@ -58,14 +58,14 @@ config MLX5_EN_RXNFC API. config MLX5_MPFS - bool "Mellanox Technologies MLX5 MPFS support" - depends on MLX5_CORE_EN + bool "Mellanox Technologies MLX5 MPFS support" + depends on MLX5_CORE_EN default y - ---help--- + ---help--- Mellanox Technologies Ethernet Multi-Physical Function Switch (MPFS) - support in ConnectX NIC. MPFs is required for when multi-PF configuration - is enabled to allow passing user configured unicast MAC addresses to the - requesting PF. + support in ConnectX NIC. MPFs is required for when multi-PF configuration + is enabled to allow passing user configured unicast MAC addresses to the + requesting PF. config MLX5_ESWITCH bool "Mellanox Technologies MLX5 SRIOV E-Switch support" @@ -73,10 +73,10 @@ config MLX5_ESWITCH default y ---help--- Mellanox Technologies Ethernet SRIOV E-Switch support in ConnectX NIC. - E-Switch provides internal SRIOV packet steering and switching for the - enabled VFs and PF in two available modes: - Legacy SRIOV mode (L2 mac vlan steering based). - Switchdev mode (eswitch offloads). + E-Switch provides internal SRIOV packet steering and switching for the + enabled VFs and PF in two available modes: + Legacy SRIOV mode (L2 mac vlan steering based). + Switchdev mode (eswitch offloads). config MLX5_CORE_EN_DCB bool "Data Center Bridging (DCB) Support" diff --git a/drivers/net/ethernet/nxp/Kconfig b/drivers/net/ethernet/nxp/Kconfig index 418afb84c84b..ee83a71c2509 100644 --- a/drivers/net/ethernet/nxp/Kconfig +++ b/drivers/net/ethernet/nxp/Kconfig @@ -1,9 +1,9 @@ # SPDX-License-Identifier: GPL-2.0-only config LPC_ENET - tristate "NXP ethernet MAC on LPC devices" - depends on ARCH_LPC32XX || COMPILE_TEST - select PHYLIB - help + tristate "NXP ethernet MAC on LPC devices" + depends on ARCH_LPC32XX || COMPILE_TEST + select PHYLIB + help Say Y or M here if you want to use the NXP ethernet MAC included on some NXP LPC devices. You can safely enable this option for LPC32xx SoC. Also available as a module. diff --git a/drivers/net/ethernet/pensando/Kconfig b/drivers/net/ethernet/pensando/Kconfig index 5ea570be8379..bd0583e409df 100644 --- a/drivers/net/ethernet/pensando/Kconfig +++ b/drivers/net/ethernet/pensando/Kconfig @@ -26,7 +26,7 @@ config IONIC found in . - To compile this driver as a module, choose M here. The module - will be called ionic. + To compile this driver as a module, choose M here. The module + will be called ionic. endif # NET_VENDOR_PENSANDO diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 03be30cde552..fe602648b99f 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -460,9 +460,9 @@ config RENESAS_PHY Supports the Renesas PHYs uPD60620 and uPD60620A. config ROCKCHIP_PHY - tristate "Driver for Rockchip Ethernet PHYs" - ---help--- - Currently supports the integrated Ethernet PHY. + tristate "Driver for Rockchip Ethernet PHYs" + ---help--- + Currently supports the integrated Ethernet PHY. config SMSC_PHY tristate "SMSC PHYs" diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig index d98d6ac90f3d..56616d988c96 100644 --- a/drivers/net/wireless/ath/Kconfig +++ b/drivers/net/wireless/ath/Kconfig @@ -34,7 +34,7 @@ config ATH_TRACEPOINTS depends on ATH_DEBUG depends on EVENT_TRACING ---help--- - This option enables tracepoints for atheros wireless drivers. + This option enables tracepoints for atheros wireless drivers. Currently, ath9k makes use of this facility. config ATH_REG_DYNAMIC_USER_REG_HINTS diff --git a/drivers/net/wireless/ath/ar5523/Kconfig b/drivers/net/wireless/ath/ar5523/Kconfig index 41d3c9a48b08..65b39c7d035d 100644 --- a/drivers/net/wireless/ath/ar5523/Kconfig +++ b/drivers/net/wireless/ath/ar5523/Kconfig @@ -5,5 +5,5 @@ config AR5523 select ATH_COMMON select FW_LOADER ---help--- - This module add support for AR5523 based USB dongles such as D-Link - DWL-G132, Netgear WPN111 and many more. + This module add support for AR5523 based USB dongles such as D-Link + DWL-G132, Netgear WPN111 and many more. diff --git a/drivers/net/wireless/ath/ath6kl/Kconfig b/drivers/net/wireless/ath/ath6kl/Kconfig index dcf8ca0dcc52..62c22fdcca38 100644 --- a/drivers/net/wireless/ath/ath6kl/Kconfig +++ b/drivers/net/wireless/ath/ath6kl/Kconfig @@ -2,7 +2,7 @@ config ATH6KL tristate "Atheros mobile chipsets support" depends on CFG80211 - ---help--- + ---help--- This module adds core support for wireless adapters based on Atheros AR6003 and AR6004 chipsets. You still need separate bus drivers for USB and SDIO to be able to use real devices. diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index 2d1247f61297..c99f42284465 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -148,7 +148,7 @@ config ATH9K_CHANNEL_CONTEXT depends on ATH9K default n ---help--- - This option enables channel context support in ath9k, which is needed + This option enables channel context support in ath9k, which is needed for multi-channel concurrency. Enable this if P2P PowerSave support is required. diff --git a/drivers/net/wireless/ath/carl9170/Kconfig b/drivers/net/wireless/ath/carl9170/Kconfig index 757eb765e17c..b1bce7aad399 100644 --- a/drivers/net/wireless/ath/carl9170/Kconfig +++ b/drivers/net/wireless/ath/carl9170/Kconfig @@ -41,9 +41,9 @@ config CARL9170_WPC default y config CARL9170_HWRNG - bool "Random number generator" - depends on CARL9170 && (HW_RANDOM = y || HW_RANDOM = CARL9170) - default n + bool "Random number generator" + depends on CARL9170 && (HW_RANDOM = y || HW_RANDOM = CARL9170) + default n help Provides a hardware random number generator to the kernel. diff --git a/drivers/net/wireless/atmel/Kconfig b/drivers/net/wireless/atmel/Kconfig index 809bdf331848..4c0556b3a5ba 100644 --- a/drivers/net/wireless/atmel/Kconfig +++ b/drivers/net/wireless/atmel/Kconfig @@ -20,22 +20,22 @@ config ATMEL select FW_LOADER select CRC32 ---help--- - A driver 802.11b wireless cards based on the Atmel fast-vnet - chips. This driver supports standard Linux wireless extensions. + A driver 802.11b wireless cards based on the Atmel fast-vnet + chips. This driver supports standard Linux wireless extensions. - Many cards based on this chipset do not have flash memory - and need their firmware loaded at start-up. If yours is - one of these, you will need to provide a firmware image - to be loaded into the card by the driver. The Atmel - firmware package can be downloaded from - + Many cards based on this chipset do not have flash memory + and need their firmware loaded at start-up. If yours is + one of these, you will need to provide a firmware image + to be loaded into the card by the driver. The Atmel + firmware package can be downloaded from + config PCI_ATMEL tristate "Atmel at76c506 PCI cards" depends on ATMEL && PCI ---help--- - Enable support for PCI and mini-PCI cards containing the - Atmel at76c506 chip. + Enable support for PCI and mini-PCI cards containing the + Atmel at76c506 chip. config PCMCIA_ATMEL tristate "Atmel at76c502/at76c504 PCMCIA cards" @@ -48,11 +48,11 @@ config PCMCIA_ATMEL Atmel at76c502 and at76c504 chips. config AT76C50X_USB - tristate "Atmel at76c503/at76c505/at76c505a USB cards" - depends on MAC80211 && USB - select FW_LOADER - ---help--- - Enable support for USB Wireless devices using Atmel at76c503, - at76c505 or at76c505a chips. + tristate "Atmel at76c503/at76c505/at76c505a USB cards" + depends on MAC80211 && USB + select FW_LOADER + ---help--- + Enable support for USB Wireless devices using Atmel at76c503, + at76c505 or at76c505a chips. endif # WLAN_VENDOR_ATMEL diff --git a/drivers/net/wireless/intel/ipw2x00/Kconfig b/drivers/net/wireless/intel/ipw2x00/Kconfig index 5d2878a73732..ab17903ba9f8 100644 --- a/drivers/net/wireless/intel/ipw2x00/Kconfig +++ b/drivers/net/wireless/intel/ipw2x00/Kconfig @@ -13,37 +13,37 @@ config IPW2100 select LIB80211 select LIBIPW ---help--- - A driver for the Intel PRO/Wireless 2100 Network + A driver for the Intel PRO/Wireless 2100 Network Connection 802.11b wireless network adapter. - See + See for information on the capabilities currently enabled in this driver and for tips for debugging issues and problems. In order to use this driver, you will need a firmware image for it. - You can obtain the firmware from - . Once you have the firmware image, you + You can obtain the firmware from + . Once you have the firmware image, you will need to place it in /lib/firmware. - You will also very likely need the Wireless Tools in order to - configure your card: + You will also very likely need the Wireless Tools in order to + configure your card: - . + . + + It is recommended that you compile this driver as a module (M) + rather than built-in (Y). This driver requires firmware at device + initialization time, and when built-in this typically happens + before the filesystem is accessible (hence firmware will be + unavailable and initialization will fail). If you do choose to build + this driver into your kernel image, you can avoid this problem by + including the firmware and a firmware loader in an initramfs. - It is recommended that you compile this driver as a module (M) - rather than built-in (Y). This driver requires firmware at device - initialization time, and when built-in this typically happens - before the filesystem is accessible (hence firmware will be - unavailable and initialization will fail). If you do choose to build - this driver into your kernel image, you can avoid this problem by - including the firmware and a firmware loader in an initramfs. - config IPW2100_MONITOR - bool "Enable promiscuous mode" - depends on IPW2100 - ---help--- + bool "Enable promiscuous mode" + depends on IPW2100 + ---help--- Enables promiscuous/monitor mode support for the ipw2100 driver. - With this feature compiled into the driver, you can switch to + With this feature compiled into the driver, you can switch to promiscuous mode via the Wireless Tool's Monitor mode. While in this mode, no packets can be sent. @@ -51,17 +51,17 @@ config IPW2100_DEBUG bool "Enable full debugging output in IPW2100 module." depends on IPW2100 ---help--- - This option will enable debug tracing output for the IPW2100. + This option will enable debug tracing output for the IPW2100. - This will result in the kernel module being ~60k larger. You can - control which debug output is sent to the kernel log by setting the - value in + This will result in the kernel module being ~60k larger. You can + control which debug output is sent to the kernel log by setting the + value in /sys/bus/pci/drivers/ipw2100/debug_level This entry will only exist if this option is enabled. - If you are not trying to debug or develop the IPW2100 driver, you + If you are not trying to debug or develop the IPW2100 driver, you most likely want to say N here. config IPW2200 @@ -75,37 +75,37 @@ config IPW2200 select LIB80211 select LIBIPW ---help--- - A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network - Connection adapters. + A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network + Connection adapters. - See + See for information on the capabilities currently enabled in this driver and for tips for debugging issues and problems. In order to use this driver, you will need a firmware image for it. - You can obtain the firmware from - . See the above referenced README.ipw2200 + You can obtain the firmware from + . See the above referenced README.ipw2200 for information on where to install the firmware images. - You will also very likely need the Wireless Tools in order to - configure your card: + You will also very likely need the Wireless Tools in order to + configure your card: - . + . - It is recommended that you compile this driver as a module (M) - rather than built-in (Y). This driver requires firmware at device - initialization time, and when built-in this typically happens - before the filesystem is accessible (hence firmware will be - unavailable and initialization will fail). If you do choose to build - this driver into your kernel image, you can avoid this problem by - including the firmware and a firmware loader in an initramfs. + It is recommended that you compile this driver as a module (M) + rather than built-in (Y). This driver requires firmware at device + initialization time, and when built-in this typically happens + before the filesystem is accessible (hence firmware will be + unavailable and initialization will fail). If you do choose to build + this driver into your kernel image, you can avoid this problem by + including the firmware and a firmware loader in an initramfs. config IPW2200_MONITOR - bool "Enable promiscuous mode" - depends on IPW2200 - ---help--- + bool "Enable promiscuous mode" + depends on IPW2200 + ---help--- Enables promiscuous/monitor mode support for the ipw2200 driver. - With this feature compiled into the driver, you can switch to + With this feature compiled into the driver, you can switch to promiscuous mode via the Wireless Tool's Monitor mode. While in this mode, no packets can be sent. @@ -118,28 +118,28 @@ config IPW2200_PROMISCUOUS depends on IPW2200_MONITOR select IPW2200_RADIOTAP ---help--- - Enables the creation of a second interface prefixed 'rtap'. - This second interface will provide every received in radiotap + Enables the creation of a second interface prefixed 'rtap'. + This second interface will provide every received in radiotap format. - This is useful for performing wireless network analysis while - maintaining an active association. + This is useful for performing wireless network analysis while + maintaining an active association. + + Example usage: - Example usage: + % modprobe ipw2200 rtap_iface=1 + % ifconfig rtap0 up + % tethereal -i rtap0 - % modprobe ipw2200 rtap_iface=1 - % ifconfig rtap0 up - % tethereal -i rtap0 + If you do not specify 'rtap_iface=1' as a module parameter then + the rtap interface will not be created and you will need to turn + it on via sysfs: - If you do not specify 'rtap_iface=1' as a module parameter then - the rtap interface will not be created and you will need to turn - it on via sysfs: - - % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface + % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface config IPW2200_QOS - bool "Enable QoS support" - depends on IPW2200 + bool "Enable QoS support" + depends on IPW2200 config IPW2200_DEBUG bool "Enable full debugging output in IPW2200 module." diff --git a/drivers/net/wireless/intel/iwlegacy/Kconfig b/drivers/net/wireless/intel/iwlegacy/Kconfig index e329fd7b09c0..100f55858b13 100644 --- a/drivers/net/wireless/intel/iwlegacy/Kconfig +++ b/drivers/net/wireless/intel/iwlegacy/Kconfig @@ -91,9 +91,9 @@ config IWLEGACY_DEBUG any problems you may encounter. config IWLEGACY_DEBUGFS - bool "iwlegacy (iwl 3945/4965) debugfs support" - depends on IWLEGACY && MAC80211_DEBUGFS - ---help--- + bool "iwlegacy (iwl 3945/4965) debugfs support" + depends on IWLEGACY && MAC80211_DEBUGFS + ---help--- Enable creation of debugfs files for the iwlegacy drivers. This is a low-impact option that allows getting insight into the driver's state at runtime. diff --git a/drivers/net/wireless/intel/iwlwifi/Kconfig b/drivers/net/wireless/intel/iwlwifi/Kconfig index 7dbc0d38bb3b..091d621ad25f 100644 --- a/drivers/net/wireless/intel/iwlwifi/Kconfig +++ b/drivers/net/wireless/intel/iwlwifi/Kconfig @@ -119,9 +119,9 @@ config IWLWIFI_DEBUG any problems you may encounter. config IWLWIFI_DEBUGFS - bool "iwlwifi debugfs support" - depends on MAC80211_DEBUGFS - ---help--- + bool "iwlwifi debugfs support" + depends on MAC80211_DEBUGFS + ---help--- Enable creation of debugfs files for the iwlwifi drivers. This is a low-impact option that allows getting insight into the driver's state at runtime. diff --git a/drivers/net/wireless/ralink/rt2x00/Kconfig b/drivers/net/wireless/ralink/rt2x00/Kconfig index 858f8aa3e616..f8a9244ce012 100644 --- a/drivers/net/wireless/ralink/rt2x00/Kconfig +++ b/drivers/net/wireless/ralink/rt2x00/Kconfig @@ -98,17 +98,17 @@ config RT2800PCI_RT53XX bool "rt2800pci - Include support for rt53xx devices (EXPERIMENTAL)" default y ---help--- - This adds support for rt53xx wireless chipset family to the - rt2800pci driver. - Supported chips: RT5390 + This adds support for rt53xx wireless chipset family to the + rt2800pci driver. + Supported chips: RT5390 config RT2800PCI_RT3290 bool "rt2800pci - Include support for rt3290 devices (EXPERIMENTAL)" default y ---help--- - This adds support for rt3290 wireless chipset family to the - rt2800pci driver. - Supported chips: RT3290 + This adds support for rt3290 wireless chipset family to the + rt2800pci driver. + Supported chips: RT3290 endif config RT2500USB @@ -176,16 +176,16 @@ config RT2800USB_RT3573 config RT2800USB_RT53XX bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)" ---help--- - This adds support for rt53xx wireless chipset family to the - rt2800usb driver. - Supported chips: RT5370 + This adds support for rt53xx wireless chipset family to the + rt2800usb driver. + Supported chips: RT5370 config RT2800USB_RT55XX bool "rt2800usb - Include support for rt55xx devices (EXPERIMENTAL)" ---help--- - This adds support for rt55xx wireless chipset family to the - rt2800usb driver. - Supported chips: RT5572 + This adds support for rt55xx wireless chipset family to the + rt2800usb driver. + Supported chips: RT5572 config RT2800USB_UNKNOWN bool "rt2800usb - Include support for unknown (USB) devices" -- cgit v1.2.1 From ba56d8ce38c8252fff5b745db3899cf092578ede Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 23 Sep 2019 17:02:46 +0800 Subject: macsec: drop skb sk before calling gro_cells_receive Fei Liu reported a crash when doing netperf on a topo of macsec dev over veth: [ 448.919128] refcount_t: underflow; use-after-free. [ 449.090460] Call trace: [ 449.092895] refcount_sub_and_test+0xb4/0xc0 [ 449.097155] tcp_wfree+0x2c/0x150 [ 449.100460] ip_rcv+0x1d4/0x3a8 [ 449.103591] __netif_receive_skb_core+0x554/0xae0 [ 449.108282] __netif_receive_skb+0x28/0x78 [ 449.112366] netif_receive_skb_internal+0x54/0x100 [ 449.117144] napi_gro_complete+0x70/0xc0 [ 449.121054] napi_gro_flush+0x6c/0x90 [ 449.124703] napi_complete_done+0x50/0x130 [ 449.128788] gro_cell_poll+0x8c/0xa8 [ 449.132351] net_rx_action+0x16c/0x3f8 [ 449.136088] __do_softirq+0x128/0x320 The issue was caused by skb's true_size changed without its sk's sk_wmem_alloc increased in tcp/skb_gro_receive(). Later when the skb is being freed and the skb's truesize is subtracted from its sk's sk_wmem_alloc in tcp_wfree(), underflow occurs. macsec is calling gro_cells_receive() to receive a packet, which actually requires skb->sk to be NULL. However when macsec dev is over veth, it's possible the skb->sk is still set if the skb was not unshared or expanded from the peer veth. ip_rcv() is calling skb_orphan() to drop the skb's sk for tproxy, but it is too late for macsec's calling gro_cells_receive(). So fix it by dropping the skb's sk earlier on rx path of macsec. Fixes: 5491e7c6b1a9 ("macsec: enable GRO and RPS on macsec devices") Reported-by: Xiumei Mu Reported-by: Fei Liu Signed-off-by: Xin Long Signed-off-by: David S. Miller --- drivers/net/macsec.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c index 8f46aa1ddec0..cb7637364b40 100644 --- a/drivers/net/macsec.c +++ b/drivers/net/macsec.c @@ -1235,6 +1235,7 @@ deliver: macsec_rxsa_put(rx_sa); macsec_rxsc_put(rx_sc); + skb_orphan(skb); ret = gro_cells_receive(&macsec->gro_cells, skb); if (ret == NET_RX_SUCCESS) count_rx(dev, skb->len); -- cgit v1.2.1 From 4f28bd956e081fc018fe9b41ffa31573f17bfb61 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 23 Sep 2019 11:59:15 +0200 Subject: net: stmmac: Fix page pool size The size of individual pages in the page pool in given by an order. The order is the binary logarithm of the number of pages that make up one of the pages in the pool. However, the driver currently passes the number of pages rather than the order, so it ends up wasting quite a bit of memory. Fix this by taking the binary logarithm and passing that in the order field. Fixes: 2af6106ae949 ("net: stmmac: Introducing support for Page Pool") Signed-off-by: Thierry Reding Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index a6cb2aa60e64..d3232738fb25 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1557,13 +1557,15 @@ static int alloc_dma_rx_desc_resources(struct stmmac_priv *priv) for (queue = 0; queue < rx_count; queue++) { struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue]; struct page_pool_params pp_params = { 0 }; + unsigned int num_pages; rx_q->queue_index = queue; rx_q->priv_data = priv; pp_params.flags = PP_FLAG_DMA_MAP; pp_params.pool_size = DMA_RX_SIZE; - pp_params.order = DIV_ROUND_UP(priv->dma_buf_sz, PAGE_SIZE); + num_pages = DIV_ROUND_UP(priv->dma_buf_sz, PAGE_SIZE); + pp_params.order = ilog2(num_pages); pp_params.nid = dev_to_node(priv->device); pp_params.dev = priv->device; pp_params.dma_dir = DMA_FROM_DEVICE; -- cgit v1.2.1 From 31aefe14bc9f56566041303d733fda511d3a1c3e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 25 Sep 2019 13:54:30 +0300 Subject: net: aquantia: Fix aq_vec_isr_legacy() return value The irqreturn_t type is an enum or an unsigned int in GCC. That creates to problems because it can't detect if the self->aq_hw_ops->hw_irq_read() call fails and at the end the function always returns IRQ_HANDLED. drivers/net/ethernet/aquantia/atlantic/aq_vec.c:316 aq_vec_isr_legacy() warn: unsigned 'err' is never less than zero. drivers/net/ethernet/aquantia/atlantic/aq_vec.c:329 aq_vec_isr_legacy() warn: always true condition '(err >= 0) => (0-u32max >= 0)' Fixes: 970a2e9864b0 ("net: ethernet: aquantia: Vector operations") Signed-off-by: Dan Carpenter Reviewed-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_vec.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_vec.c b/drivers/net/ethernet/aquantia/atlantic/aq_vec.c index 28892b8acd0e..a95c263a45aa 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_vec.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_vec.c @@ -306,15 +306,13 @@ irqreturn_t aq_vec_isr_legacy(int irq, void *private) { struct aq_vec_s *self = private; u64 irq_mask = 0U; - irqreturn_t err = 0; + int err; - if (!self) { - err = -EINVAL; - goto err_exit; - } + if (!self) + return IRQ_NONE; err = self->aq_hw_ops->hw_irq_read(self->aq_hw, &irq_mask); if (err < 0) - goto err_exit; + return IRQ_NONE; if (irq_mask) { self->aq_hw_ops->hw_irq_disable(self->aq_hw, @@ -322,11 +320,10 @@ irqreturn_t aq_vec_isr_legacy(int irq, void *private) napi_schedule(&self->napi); } else { self->aq_hw_ops->hw_irq_enable(self->aq_hw, 1U); - err = IRQ_NONE; + return IRQ_NONE; } -err_exit: - return err >= 0 ? IRQ_HANDLED : IRQ_NONE; + return IRQ_HANDLED; } cpumask_t *aq_vec_get_affinity_mask(struct aq_vec_s *self) -- cgit v1.2.1 From 286183147666fb76c057836c57d86e9e6f508bca Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 25 Sep 2019 13:54:59 +0300 Subject: cxgb4: Signedness bug in init_one() The "chip" variable is an enum, and it's treated as unsigned int by GCC in this context so the error handling isn't triggered. Fixes: e8d452923ae6 ("cxgb4: clean up init_one") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 71854a19cebe..38024877751c 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -5701,7 +5701,7 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) whoami = t4_read_reg(adapter, PL_WHOAMI_A); pci_read_config_word(pdev, PCI_DEVICE_ID, &device_id); chip = t4_get_chip_type(adapter, CHELSIO_PCI_ID_VER(device_id)); - if (chip < 0) { + if ((int)chip < 0) { dev_err(&pdev->dev, "Device %d is not supported\n", device_id); err = chip; goto out_free_adapter; -- cgit v1.2.1 From 002dfe8085255b7bf1e0758c3d195c5412d35be9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 25 Sep 2019 13:55:32 +0300 Subject: net: hisilicon: Fix signedness bug in hix5hd2_dev_probe() The "priv->phy_mode" variable is an enum and in this context GCC will treat it as unsigned to the error handling will never trigger. Fixes: 57c5bc9ad7d7 ("net: hisilicon: add hix5hd2 mac driver") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hix5hd2_gmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c b/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c index 95a6b0926170..c41b19c760f8 100644 --- a/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c +++ b/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c @@ -1194,7 +1194,7 @@ static int hix5hd2_dev_probe(struct platform_device *pdev) goto err_free_mdio; priv->phy_mode = of_get_phy_mode(node); - if (priv->phy_mode < 0) { + if ((int)priv->phy_mode < 0) { netdev_err(ndev, "not find phy-mode\n"); ret = -EINVAL; goto err_mdiobus; -- cgit v1.2.1 From 25a584955f020d6ec499c513923fb220f3112d2b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 25 Sep 2019 13:56:04 +0300 Subject: net: broadcom/bcmsysport: Fix signedness in bcm_sysport_probe() The "priv->phy_interface" variable is an enum and in this context GCC will treat it as unsigned so the error handling will never be triggered. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Dan Carpenter Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcmsysport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index 7df887e4024c..a977a459bd20 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -2481,7 +2481,7 @@ static int bcm_sysport_probe(struct platform_device *pdev) priv->phy_interface = of_get_phy_mode(dn); /* Default to GMII interface mode */ - if (priv->phy_interface < 0) + if ((int)priv->phy_interface < 0) priv->phy_interface = PHY_INTERFACE_MODE_GMII; /* In the case of a fixed PHY, the DT node associated -- cgit v1.2.1 From bd55f8ddbc437c225391ca8f487e7ec10243c4cc Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 25 Sep 2019 13:56:38 +0300 Subject: net: netsec: Fix signedness bug in netsec_probe() The "priv->phy_interface" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling is never triggered. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/socionext/netsec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c index 1502fe8b0456..55db7fbd43cc 100644 --- a/drivers/net/ethernet/socionext/netsec.c +++ b/drivers/net/ethernet/socionext/netsec.c @@ -2007,7 +2007,7 @@ static int netsec_probe(struct platform_device *pdev) NETIF_MSG_LINK | NETIF_MSG_PROBE; priv->phy_interface = device_get_phy_mode(&pdev->dev); - if (priv->phy_interface < 0) { + if ((int)priv->phy_interface < 0) { dev_err(&pdev->dev, "missing required property 'phy-mode'\n"); ret = -ENODEV; goto free_ndev; -- cgit v1.2.1 From ced81eb84d6ab0a993ff79c04cc0238d44415af4 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 25 Sep 2019 13:57:14 +0300 Subject: enetc: Fix a signedness bug in enetc_of_get_phy() The "priv->if_mode" is type phy_interface_t which is an enum. In this context GCC will treat the enum as an unsigned int so this error handling is never triggered. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index 7d6513ff8507..b73421c3e25b 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -785,7 +785,7 @@ static int enetc_of_get_phy(struct enetc_ndev_priv *priv) } priv->if_mode = of_get_phy_mode(np); - if (priv->if_mode < 0) { + if ((int)priv->if_mode < 0) { dev_err(priv->dev, "missing phy type\n"); of_node_put(priv->phy_node); if (of_phy_is_fixed_link(np)) -- cgit v1.2.1 From 7f9e88e6ef8c971f2c638b5ff7044c59b5d0f58d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 25 Sep 2019 13:57:50 +0300 Subject: net: socionext: Fix a signedness bug in ave_probe() The "phy_mode" variable is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: 4c270b55a5af ("net: ethernet: socionext: add AVE ethernet driver") Signed-off-by: Dan Carpenter Reviewed-by: Kunihiko Hayashi Signed-off-by: David S. Miller --- drivers/net/ethernet/socionext/sni_ave.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/socionext/sni_ave.c b/drivers/net/ethernet/socionext/sni_ave.c index 10d0c3e478ab..d047a53f34f2 100644 --- a/drivers/net/ethernet/socionext/sni_ave.c +++ b/drivers/net/ethernet/socionext/sni_ave.c @@ -1566,7 +1566,7 @@ static int ave_probe(struct platform_device *pdev) np = dev->of_node; phy_mode = of_get_phy_mode(np); - if (phy_mode < 0) { + if ((int)phy_mode < 0) { dev_err(dev, "phy-mode not found\n"); return -EINVAL; } -- cgit v1.2.1 From f10210517a2f37feea2edf85eb34c98977265c16 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 25 Sep 2019 13:58:22 +0300 Subject: net: stmmac: dwmac-meson8b: Fix signedness bug in probe The "dwmac->phy_mode" is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: 566e82516253 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Signed-off-by: Dan Carpenter Reviewed-by: Martin Blumenstingl Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c index 9cda29e4b89d..306da8f6b7d5 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c @@ -339,7 +339,7 @@ static int meson8b_dwmac_probe(struct platform_device *pdev) dwmac->dev = &pdev->dev; dwmac->phy_mode = of_get_phy_mode(pdev->dev.of_node); - if (dwmac->phy_mode < 0) { + if ((int)dwmac->phy_mode < 0) { dev_err(&pdev->dev, "missing phy-mode property\n"); ret = -EINVAL; goto err_remove_config_dt; -- cgit v1.2.1 From 73e211e11be86715d66bd3c9d38b3c34b05fca9a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 25 Sep 2019 13:59:11 +0300 Subject: net: axienet: fix a signedness bug in probe The "lp->phy_mode" is an enum but in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: ee06b1728b95 ("net: axienet: add support for standard phy-mode binding") Signed-off-by: Dan Carpenter Reviewed-by: Radhey Shyam Pandey Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 4fc627fb4d11..676006f32f91 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -1762,7 +1762,7 @@ static int axienet_probe(struct platform_device *pdev) } } else { lp->phy_mode = of_get_phy_mode(pdev->dev.of_node); - if (lp->phy_mode < 0) { + if ((int)lp->phy_mode < 0) { ret = -EINVAL; goto free_netdev; } -- cgit v1.2.1 From d7eb651212fdbafa82d485d8e76095ac3b14c193 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 25 Sep 2019 14:01:00 +0300 Subject: of: mdio: Fix a signedness bug in of_phy_get_and_connect() The "iface" variable is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: b78624125304 ("of_mdio: Abstract a general interface for phy connect") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/of/of_mdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 000b95787df1..bd6129db6417 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -362,7 +362,7 @@ struct phy_device *of_phy_get_and_connect(struct net_device *dev, int ret; iface = of_get_phy_mode(np); - if (iface < 0) + if ((int)iface < 0) return NULL; if (of_phy_is_fixed_link(np)) { ret = of_phy_register_fixed_link(np); -- cgit v1.2.1 From 1a4b62a0b8a3b81eca24366f63e214a7144b9f02 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 25 Sep 2019 14:05:24 +0300 Subject: net: nixge: Fix a signedness bug in nixge_probe() The "priv->phy_mode" is an enum and in this context GCC will treat it as an unsigned int so it can never be less than zero. Fixes: 492caffa8a1a ("net: ethernet: nixge: Add support for National Instruments XGE netdev") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/ni/nixge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ni/nixge.c b/drivers/net/ethernet/ni/nixge.c index 0b384f97d2fd..2761f3a3ae50 100644 --- a/drivers/net/ethernet/ni/nixge.c +++ b/drivers/net/ethernet/ni/nixge.c @@ -1347,7 +1347,7 @@ static int nixge_probe(struct platform_device *pdev) } priv->phy_mode = of_get_phy_mode(pdev->dev.of_node); - if (priv->phy_mode < 0) { + if ((int)priv->phy_mode < 0) { netdev_err(ndev, "not find \"phy-mode\" property\n"); err = -EINVAL; goto unregister_mdio; -- cgit v1.2.1 From 231042181dc9d6122c6faba64e99ccb25f13cc6c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 25 Sep 2019 14:05:54 +0300 Subject: net: ethernet: stmmac: Fix signedness bug in ipq806x_gmac_of_parse() The "gmac->phy_mode" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling will never be triggered. Fixes: b1c17215d718 ("stmmac: add ipq806x glue layer") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c index 2c6d7c69c8f7..0d21082ceb93 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c @@ -191,7 +191,7 @@ static int ipq806x_gmac_of_parse(struct ipq806x_gmac *gmac) struct device *dev = &gmac->pdev->dev; gmac->phy_mode = of_get_phy_mode(dev->of_node); - if (gmac->phy_mode < 0) { + if ((int)gmac->phy_mode < 0) { dev_err(dev, "missing phy mode property\n"); return -EINVAL; } -- cgit v1.2.1 From 2b6fd3ea438c742d162a40a124b0181922633163 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 25 Sep 2019 02:47:07 +0200 Subject: net: dsa: qca8k: Fix port enable for CPU port MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The CPU port does not have a PHY connected to it. So calling phy_support_asym_pause() results in an Opps. As with other DSA drivers, add a guard that the port is a user port. Reported-by: Michal Vokáč Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports") Signed-off-by: Andrew Lunn Tested-by: Michal Vokáč Signed-off-by: David S. Miller --- drivers/net/dsa/qca8k.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index 16f15c93a102..684aa51684db 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -936,6 +936,9 @@ qca8k_port_enable(struct dsa_switch *ds, int port, { struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; + if (!dsa_is_user_port(ds, port)) + return 0; + qca8k_port_set_status(priv, port, 1); priv->port_sts[port].enabled = 1; -- cgit v1.2.1 From dac91170f8e9c73784af5fad6225e954b795601c Mon Sep 17 00:00:00 2001 From: David Ahern Date: Wed, 25 Sep 2019 07:53:19 -0700 Subject: vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled A user reported that vrf create fails when IPv6 is disabled at boot using 'ipv6.disable=1': https://bugzilla.kernel.org/show_bug.cgi?id=204903 The failure is adding fib rules at create time. Add RTNL_FAMILY_IP6MR to the check in vrf_fib_rule if ipv6_mod_enabled is disabled. Fixes: e4a38c0c4b27 ("ipv6: add vrf table handling code for ipv6 mcast") Signed-off-by: David Ahern Cc: Patrick Ruddy Signed-off-by: David S. Miller --- drivers/net/vrf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index 6e84328bdd40..a4b38a980c3c 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -1154,7 +1154,8 @@ static int vrf_fib_rule(const struct net_device *dev, __u8 family, bool add_it) struct sk_buff *skb; int err; - if (family == AF_INET6 && !ipv6_mod_enabled()) + if ((family == AF_INET6 || family == RTNL_FAMILY_IP6MR) && + !ipv6_mod_enabled()) return 0; skb = nlmsg_new(vrf_fib_rule_nl_size(), GFP_KERNEL); -- cgit v1.2.1 From 8572cea1461a006bce1d06c0c4b0575869125fa4 Mon Sep 17 00:00:00 2001 From: Navid Emamdoost Date: Wed, 25 Sep 2019 13:24:02 -0500 Subject: nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs In nfp_flower_spawn_phy_reprs, in the for loop over eth_tbl if any of intermediate allocations or initializations fail memory is leaked. requiered releases are added. Fixes: b94524529741 ("nfp: flower: add per repr private data for LAG offload") Signed-off-by: Navid Emamdoost Acked-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/flower/main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/flower/main.c b/drivers/net/ethernet/netronome/nfp/flower/main.c index 7a20447cca19..91a47899220f 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/main.c +++ b/drivers/net/ethernet/netronome/nfp/flower/main.c @@ -515,6 +515,7 @@ nfp_flower_spawn_phy_reprs(struct nfp_app *app, struct nfp_flower_priv *priv) repr_priv = kzalloc(sizeof(*repr_priv), GFP_KERNEL); if (!repr_priv) { err = -ENOMEM; + nfp_repr_free(repr); goto err_reprs_clean; } @@ -525,11 +526,13 @@ nfp_flower_spawn_phy_reprs(struct nfp_app *app, struct nfp_flower_priv *priv) port = nfp_port_alloc(app, NFP_PORT_PHYS_PORT, repr); if (IS_ERR(port)) { err = PTR_ERR(port); + kfree(repr_priv); nfp_repr_free(repr); goto err_reprs_clean; } err = nfp_port_init_phy_port(app->pf, app, port, i); if (err) { + kfree(repr_priv); nfp_port_free(port); nfp_repr_free(repr); goto err_reprs_clean; @@ -542,6 +545,7 @@ nfp_flower_spawn_phy_reprs(struct nfp_app *app, struct nfp_flower_priv *priv) err = nfp_repr_init(app, repr, cmsg_port_id, port, priv->nn->dp.netdev); if (err) { + kfree(repr_priv); nfp_port_free(port); nfp_repr_free(repr); goto err_reprs_clean; -- cgit v1.2.1 From 8ce39eb5a67aee25d9f05b40b673c95b23502e3e Mon Sep 17 00:00:00 2001 From: Navid Emamdoost Date: Wed, 25 Sep 2019 14:05:09 -0500 Subject: nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs In nfp_flower_spawn_vnic_reprs in the loop if initialization or the allocations fail memory is leaked. Appropriate releases are added. Fixes: b94524529741 ("nfp: flower: add per repr private data for LAG offload") Signed-off-by: Navid Emamdoost Acked-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/flower/main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/flower/main.c b/drivers/net/ethernet/netronome/nfp/flower/main.c index 91a47899220f..d8ad9346a26a 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/main.c +++ b/drivers/net/ethernet/netronome/nfp/flower/main.c @@ -400,6 +400,7 @@ nfp_flower_spawn_vnic_reprs(struct nfp_app *app, repr_priv = kzalloc(sizeof(*repr_priv), GFP_KERNEL); if (!repr_priv) { err = -ENOMEM; + nfp_repr_free(repr); goto err_reprs_clean; } @@ -413,6 +414,7 @@ nfp_flower_spawn_vnic_reprs(struct nfp_app *app, port = nfp_port_alloc(app, port_type, repr); if (IS_ERR(port)) { err = PTR_ERR(port); + kfree(repr_priv); nfp_repr_free(repr); goto err_reprs_clean; } @@ -433,6 +435,7 @@ nfp_flower_spawn_vnic_reprs(struct nfp_app *app, err = nfp_repr_init(app, repr, port_id, port, priv->nn->dp.netdev); if (err) { + kfree(repr_priv); nfp_port_free(port); nfp_repr_free(repr); goto err_reprs_clean; -- cgit v1.2.1 From a3aa6e65beebf3780026753ebf39db19f4c92990 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 26 Sep 2019 00:08:42 +0200 Subject: net: dsa: microchip: Always set regmap stride to 1 The regmap stride is set to 1 for regmap describing 8bit registers already. However, for 16/32/64bit registers, the stride is 2/4/8 respectively. This is not correct, as the switch protocol supports unaligned register reads and writes and the KSZ87xx even uses such unaligned register accesses to read e.g. MIB counter. This patch fixes MIB counter access on KSZ87xx. Signed-off-by: Marek Vasut Cc: Andrew Lunn Cc: David S. Miller Cc: Florian Fainelli Cc: George McCollister Cc: Tristram Ha Cc: Vivien Didelot Cc: Woojung Huh Fixes: 46558d601cb6 ("net: dsa: microchip: Initial SPI regmap support") Fixes: 255b59ad0db2 ("net: dsa: microchip: Factor out regmap config generation into common header") Reviewed-by: George McCollister Tested-by: George McCollister Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz_common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index a24d8e61fbe7..dd60d0837fc6 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -303,7 +303,7 @@ static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset, { \ .name = #width, \ .val_bits = (width), \ - .reg_stride = (width) / 8, \ + .reg_stride = 1, \ .reg_bits = (regbits) + (regalign), \ .pad_bits = (regpad), \ .max_register = BIT(regbits) - 1, \ -- cgit v1.2.1 From 2df4de1681767df900e15e34195bbf7dc1b23e06 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 25 Sep 2019 19:28:19 -0700 Subject: ptp: correctly disable flags on old ioctls Commit 415606588c61 ("PTP: introduce new versions of IOCTLs", 2019-09-13) introduced new versions of the PTP ioctls which actually validate that the flags are acceptable values. As part of this, it cleared the flags value using a bitwise and+negation, in an attempt to prevent the old ioctl from accidentally enabling new features. This is incorrect for a couple of reasons. First, it results in accidentally preventing previously working flags on the request ioctl. By clearing the "valid" flags, we now no longer allow setting the enable, rising edge, or falling edge flags. Second, if we add new additional flags in the future, they must not be set by the old ioctl. (Since the flag wasn't checked before, we could potentially break userspace programs which sent garbage flag data. The correct way to resolve this is to check for and clear all but the originally valid flags. Create defines indicating which flags are correctly checked and interpreted by the original ioctls. Use these to clear any bits which will not be correctly interpreted by the original ioctls. In the future, new flags must be added to the VALID_FLAGS macros, but *not* to the V1_VALID_FLAGS macros. In this way, new features may be exposed over the v2 ioctls, but without breaking previous userspace which happened to not clear the flags value properly. The old ioctl will continue to behave the same way, while the new ioctl gains the benefit of using the flags fields. Cc: Richard Cochran Cc: Felipe Balbi Cc: David S. Miller Cc: Christopher Hall Signed-off-by: Jacob Keller Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/ptp/ptp_chardev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ptp/ptp_chardev.c b/drivers/ptp/ptp_chardev.c index 9c18476d8d10..67d0199840fd 100644 --- a/drivers/ptp/ptp_chardev.c +++ b/drivers/ptp/ptp_chardev.c @@ -155,7 +155,7 @@ long ptp_ioctl(struct posix_clock *pc, unsigned int cmd, unsigned long arg) err = -EINVAL; break; } else if (cmd == PTP_EXTTS_REQUEST) { - req.extts.flags &= ~PTP_EXTTS_VALID_FLAGS; + req.extts.flags &= PTP_EXTTS_V1_VALID_FLAGS; req.extts.rsv[0] = 0; req.extts.rsv[1] = 0; } @@ -184,7 +184,7 @@ long ptp_ioctl(struct posix_clock *pc, unsigned int cmd, unsigned long arg) err = -EINVAL; break; } else if (cmd == PTP_PEROUT_REQUEST) { - req.perout.flags &= ~PTP_PEROUT_VALID_FLAGS; + req.perout.flags &= PTP_PEROUT_V1_VALID_FLAGS; req.perout.rsv[0] = 0; req.perout.rsv[1] = 0; req.perout.rsv[2] = 0; -- cgit v1.2.1 From fd4a8093ec0bd37d450587d50f3e10f0af57cc47 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Thu, 26 Sep 2019 15:35:10 +0900 Subject: net: socionext: ave: Avoid using netdev_err() before calling register_netdev() Until calling register_netdev(), ndev->dev_name isn't specified, and netdev_err() displays "(unnamed net_device)". ave 65000000.ethernet (unnamed net_device) (uninitialized): invalid phy-mode setting ave: probe of 65000000.ethernet failed with error -22 This replaces netdev_err() with dev_err() before calling register_netdev(). Signed-off-by: Kunihiko Hayashi Signed-off-by: David S. Miller --- drivers/net/ethernet/socionext/sni_ave.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/socionext/sni_ave.c b/drivers/net/ethernet/socionext/sni_ave.c index d047a53f34f2..6e984d5a729f 100644 --- a/drivers/net/ethernet/socionext/sni_ave.c +++ b/drivers/net/ethernet/socionext/sni_ave.c @@ -1662,19 +1662,19 @@ static int ave_probe(struct platform_device *pdev) "socionext,syscon-phy-mode", 1, 0, &args); if (ret) { - netdev_err(ndev, "can't get syscon-phy-mode property\n"); + dev_err(dev, "can't get syscon-phy-mode property\n"); goto out_free_netdev; } priv->regmap = syscon_node_to_regmap(args.np); of_node_put(args.np); if (IS_ERR(priv->regmap)) { - netdev_err(ndev, "can't map syscon-phy-mode\n"); + dev_err(dev, "can't map syscon-phy-mode\n"); ret = PTR_ERR(priv->regmap); goto out_free_netdev; } ret = priv->data->get_pinmode(priv, phy_mode, args.args[0]); if (ret) { - netdev_err(ndev, "invalid phy-mode setting\n"); + dev_err(dev, "invalid phy-mode setting\n"); goto out_free_netdev; } -- cgit v1.2.1 From 407d8098cb1ab338199f4753162799a488d87d23 Mon Sep 17 00:00:00 2001 From: Hans Andersson Date: Thu, 26 Sep 2019 09:54:37 +0200 Subject: net: phy: micrel: add Asym Pause workaround for KSZ9021 The Micrel KSZ9031 PHY may fail to establish a link when the Asymmetric Pause capability is set. This issue is described in a Silicon Errata (DS80000691D or DS80000692D), which advises to always disable the capability. Micrel KSZ9021 has no errata, but has the same issue with Asymmetric Pause. This patch apply the same workaround as the one for KSZ9031. Fixes: 3aed3e2a143c ("net: phy: micrel: add Asym Pause workaround") Signed-off-by: Hans Andersson Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 3c8186f269f9..2fea5541c35a 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -763,6 +763,8 @@ static int ksz9031_get_features(struct phy_device *phydev) * Whenever the device's Asymmetric Pause capability is set to 1, * link-up may fail after a link-up to link-down transition. * + * The Errata Sheet is for ksz9031, but ksz9021 has the same issue + * * Workaround: * Do not enable the Asymmetric Pause capability bit. */ @@ -1076,6 +1078,7 @@ static struct phy_driver ksphy_driver[] = { /* PHY_GBIT_FEATURES */ .driver_data = &ksz9021_type, .probe = kszphy_probe, + .get_features = ksz9031_get_features, .config_init = ksz9021_config_init, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr, -- cgit v1.2.1 From 6ba5bbba95f789d76ce3bf440ee02fdaf52ec486 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 26 Sep 2019 12:13:06 +0100 Subject: NFC: st95hf: clean up indentation issue The return statement is indented incorrectly, add in a missing tab and remove an extraneous space after the return Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/nfc/st95hf/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/nfc/st95hf/core.c b/drivers/nfc/st95hf/core.c index 7eda62a9e0df..9642971e89ce 100644 --- a/drivers/nfc/st95hf/core.c +++ b/drivers/nfc/st95hf/core.c @@ -661,7 +661,7 @@ static int st95hf_error_handling(struct st95hf_context *stcontext, result = -ETIMEDOUT; else result = -EIO; - return result; + return result; } /* Check for CRC err only if CRC is present in the tag response */ -- cgit v1.2.1 From 4208966f65f520d7f392dbaa62e39a8fa88ffb95 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 26 Sep 2019 12:22:52 +0100 Subject: net: ena: clean up indentation issue There memset is indented incorrectly, remove the extraneous tabs. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_eth_com.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amazon/ena/ena_eth_com.c b/drivers/net/ethernet/amazon/ena/ena_eth_com.c index 38046bf0ff44..2845ac277724 100644 --- a/drivers/net/ethernet/amazon/ena/ena_eth_com.c +++ b/drivers/net/ethernet/amazon/ena/ena_eth_com.c @@ -211,8 +211,8 @@ static int ena_com_sq_update_llq_tail(struct ena_com_io_sq *io_sq) pkt_ctrl->curr_bounce_buf = ena_com_get_next_bounce_buffer(&io_sq->bounce_buf_ctrl); - memset(io_sq->llq_buf_ctrl.curr_bounce_buf, - 0x0, llq_info->desc_list_entry_size); + memset(io_sq->llq_buf_ctrl.curr_bounce_buf, + 0x0, llq_info->desc_list_entry_size); pkt_ctrl->idx = 0; if (unlikely(llq_info->desc_stride_ctrl == ENA_ADMIN_SINGLE_DESC_PER_ENTRY)) -- cgit v1.2.1 From 979b9b251ae06e3408153bd7b9342a290d65e826 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Thu, 26 Sep 2019 14:43:38 +0300 Subject: mlxsw: spectrum: Clear VLAN filters during port initialization When a port is created, its VLAN filters are not cleared by the firmware. This causes tagged packets to be later dropped by the ingress STP filters, which default to DISCARD state. The above did not matter much until commit b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support") where we exposed the drop reason to users. Without this patch, the drop reason users will see is not consistent. If a port is enslaved to a VLAN-aware bridge and a packet with an invalid VLAN tries to ingress the bridge, it will be dropped due to ingress STP filter. If the VLAN is later enabled and then disabled, the packet will be dropped by the ingress VLAN filter despite the above being a seemingly NOP operation. Fix this by clearing all the VLAN filters during port initialization. Adjust the test accordingly. Fixes: b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support") Reported-by: Alex Kushnarov Tested-by: Alex Kushnarov Acked-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index dd234cf7b39d..dcf9562bce8a 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -3771,6 +3771,14 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port, goto err_port_qdiscs_init; } + err = mlxsw_sp_port_vlan_set(mlxsw_sp_port, 0, VLAN_N_VID - 1, false, + false); + if (err) { + dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to clear VLAN filter\n", + mlxsw_sp_port->local_port); + goto err_port_vlan_clear; + } + err = mlxsw_sp_port_nve_init(mlxsw_sp_port); if (err) { dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to initialize NVE\n", @@ -3818,6 +3826,7 @@ err_port_vlan_create: err_port_pvid_set: mlxsw_sp_port_nve_fini(mlxsw_sp_port); err_port_nve_init: +err_port_vlan_clear: mlxsw_sp_tc_qdisc_fini(mlxsw_sp_port); err_port_qdiscs_init: mlxsw_sp_port_fids_fini(mlxsw_sp_port); -- cgit v1.2.1 From 52feb8b588f6d23673dd7cc2b44b203493b627f6 Mon Sep 17 00:00:00 2001 From: Danielle Ratson Date: Thu, 26 Sep 2019 14:43:40 +0300 Subject: mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions The ASIC can only mirror a packet to one port, but when user is trying to set more than one mirror action, it doesn't fail. Add a check if more than one mirror action was specified per rule and if so, fail for not being supported. Fixes: d0d13c1858a11 ("mlxsw: spectrum_acl: Add support for mirror action") Signed-off-by: Danielle Ratson Acked-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c index 0ad1a24abfc6..b607919c8ad0 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c @@ -21,6 +21,7 @@ static int mlxsw_sp_flower_parse_actions(struct mlxsw_sp *mlxsw_sp, struct netlink_ext_ack *extack) { const struct flow_action_entry *act; + int mirror_act_count = 0; int err, i; if (!flow_action_has_entries(flow_action)) @@ -105,6 +106,11 @@ static int mlxsw_sp_flower_parse_actions(struct mlxsw_sp *mlxsw_sp, case FLOW_ACTION_MIRRED: { struct net_device *out_dev = act->dev; + if (mirror_act_count++) { + NL_SET_ERR_MSG_MOD(extack, "Multiple mirror actions per rule are not supported"); + return -EOPNOTSUPP; + } + err = mlxsw_sp_acl_rulei_act_mirror(mlxsw_sp, rulei, block, out_dev, extack); -- cgit v1.2.1 From 78beef629fd95be4ed853b2d37b832f766bd96ca Mon Sep 17 00:00:00 2001 From: Navid Emamdoost Date: Thu, 26 Sep 2019 20:51:46 -0500 Subject: nfp: abm: fix memory leak in nfp_abm_u32_knode_replace In nfp_abm_u32_knode_replace if the allocation for match fails it should go to the error handling instead of returning. Updated other gotos to have correct errno returned, too. Signed-off-by: Navid Emamdoost Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/abm/cls.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/abm/cls.c b/drivers/net/ethernet/netronome/nfp/abm/cls.c index 23ebddfb9532..9f8a1f69c0c4 100644 --- a/drivers/net/ethernet/netronome/nfp/abm/cls.c +++ b/drivers/net/ethernet/netronome/nfp/abm/cls.c @@ -176,8 +176,10 @@ nfp_abm_u32_knode_replace(struct nfp_abm_link *alink, u8 mask, val; int err; - if (!nfp_abm_u32_check_knode(alink->abm, knode, proto, extack)) + if (!nfp_abm_u32_check_knode(alink->abm, knode, proto, extack)) { + err = -EOPNOTSUPP; goto err_delete; + } tos_off = proto == htons(ETH_P_IP) ? 16 : 20; @@ -198,14 +200,18 @@ nfp_abm_u32_knode_replace(struct nfp_abm_link *alink, if ((iter->val & cmask) == (val & cmask) && iter->band != knode->res->classid) { NL_SET_ERR_MSG_MOD(extack, "conflict with already offloaded filter"); + err = -EOPNOTSUPP; goto err_delete; } } if (!match) { match = kzalloc(sizeof(*match), GFP_KERNEL); - if (!match) - return -ENOMEM; + if (!match) { + err = -ENOMEM; + goto err_delete; + } + list_add(&match->list, &alink->dscp_map); } match->handle = knode->handle; @@ -221,7 +227,7 @@ nfp_abm_u32_knode_replace(struct nfp_abm_link *alink, err_delete: nfp_abm_u32_knode_delete(alink, knode); - return -EOPNOTSUPP; + return err; } static int nfp_abm_setup_tc_block_cb(enum tc_setup_type type, -- cgit v1.2.1 From faeacb6ddb13b7a020b50b9246fe098653cfbd6e Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 27 Sep 2019 10:40:39 +0100 Subject: net: tap: clean up an indentation issue There is a statement that is indented too deeply, remove the extraneous tab. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/tap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/tap.c b/drivers/net/tap.c index dd614c2cd994..3ae70c7e6860 100644 --- a/drivers/net/tap.c +++ b/drivers/net/tap.c @@ -1200,7 +1200,7 @@ err_kfree: kfree_skb(skb); err: rcu_read_lock(); - tap = rcu_dereference(q->tap); + tap = rcu_dereference(q->tap); if (tap && tap->count_tx_dropped) tap->count_tx_dropped(tap); rcu_read_unlock(); -- cgit v1.2.1