From e02f838eedef1533f7a1bcf21fe724c3c93093f9 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 30 Oct 2009 00:30:25 +0000 Subject: [WATCHDOG] CPUFREQ: S3C24XX Watchdog frequency scaling support. Add support for CPU frequency scaling to the S3C24XX Watchdog driver. Signed-off-by: Simtec Linux Team Signed-off-by: Ben Dooks Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/s3c2410_wdt.c | 89 ++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 86 insertions(+), 3 deletions(-) (limited to 'drivers/watchdog/s3c2410_wdt.c') diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index b57ac6b49147..85b93e15d011 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -36,6 +36,7 @@ #include #include #include +#include #include @@ -142,9 +143,14 @@ static void s3c2410wdt_start(void) spin_unlock(&wdt_lock); } +static inline int s3c2410wdt_is_running(void) +{ + return readl(wdt_base + S3C2410_WTCON) & S3C2410_WTCON_ENABLE; +} + static int s3c2410wdt_set_heartbeat(int timeout) { - unsigned int freq = clk_get_rate(wdt_clock); + unsigned long freq = clk_get_rate(wdt_clock); unsigned int count; unsigned int divisor = 1; unsigned long wtcon; @@ -155,7 +161,7 @@ static int s3c2410wdt_set_heartbeat(int timeout) freq /= 128; count = timeout * freq; - DBG("%s: count=%d, timeout=%d, freq=%d\n", + DBG("%s: count=%d, timeout=%d, freq=%lu\n", __func__, count, timeout, freq); /* if the count is bigger than the watchdog register, @@ -324,6 +330,73 @@ static irqreturn_t s3c2410wdt_irq(int irqno, void *param) s3c2410wdt_keepalive(); return IRQ_HANDLED; } + + +#ifdef CONFIG_CPU_FREQ + +static int s3c2410wdt_cpufreq_transition(struct notifier_block *nb, + unsigned long val, void *data) +{ + int ret; + + if (!s3c2410wdt_is_running()) + goto done; + + if (val == CPUFREQ_PRECHANGE) { + /* To ensure that over the change we don't cause the + * watchdog to trigger, we perform an keep-alive if + * the watchdog is running. + */ + + s3c2410wdt_keepalive(); + } else if (val == CPUFREQ_POSTCHANGE) { + s3c2410wdt_stop(); + + ret = s3c2410wdt_set_heartbeat(tmr_margin); + + if (ret >= 0) + s3c2410wdt_start(); + else + goto err; + } + +done: + return 0; + + err: + dev_err(wdt_dev, "cannot set new value for timeout %d\n", tmr_margin); + return ret; +} + +static struct notifier_block s3c2410wdt_cpufreq_transition_nb = { + .notifier_call = s3c2410wdt_cpufreq_transition, +}; + +static inline int s3c2410wdt_cpufreq_register(void) +{ + return cpufreq_register_notifier(&s3c2410wdt_cpufreq_transition_nb, + CPUFREQ_TRANSITION_NOTIFIER); +} + +static inline void s3c2410wdt_cpufreq_deregister(void) +{ + cpufreq_unregister_notifier(&s3c2410wdt_cpufreq_transition_nb, + CPUFREQ_TRANSITION_NOTIFIER); +} + +#else +static inline int s3c2410wdt_cpufreq_register(void) +{ + return 0; +} + +static inline void s3c2410wdt_cpufreq_deregister(void) +{ +} +#endif + + + /* device interface */ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) @@ -387,6 +460,11 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) clk_enable(wdt_clock); + if (s3c2410wdt_cpufreq_register() < 0) { + printk(KERN_ERR PFX "failed to register cpufreq\n"); + goto err_clk; + } + /* see if we can actually set the requested timer margin, and if * not, try the default value */ @@ -407,7 +485,7 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) if (ret) { dev_err(dev, "cannot register miscdev on minor=%d (%d)\n", WATCHDOG_MINOR, ret); - goto err_clk; + goto err_cpufreq; } if (tmr_atboot && started == 0) { @@ -432,6 +510,9 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) return 0; + err_cpufreq: + s3c2410wdt_cpufreq_deregister(); + err_clk: clk_disable(wdt_clock); clk_put(wdt_clock); @@ -451,6 +532,8 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev) static int __devexit s3c2410wdt_remove(struct platform_device *dev) { + s3c2410wdt_cpufreq_deregister(); + release_resource(wdt_mem); kfree(wdt_mem); wdt_mem = NULL; -- cgit v1.2.1