From 754d561ab694ff240ad1615abd0d99f3c1db79a2 Mon Sep 17 00:00:00 2001 From: Pranith Kumar Date: Thu, 21 Aug 2014 08:23:57 -0400 Subject: fbdev: Remove __init from chips_hw_init() to fix build failure Fix build failure caused as follows: The function chipsfb_pci_init() references the function __init chips_hw_init(). This is often because chipsfb_pci_init lacks a __init annotation or the annotation of chips_hw_init is wrong. make: *** [drivers] Error 2 by removing the __init annotation from chips_hw_init(). The other thing that could have been done was annotating chipsfb_pci_init(). But that cannot be done since chipsfb_pci_init() is called from non __init functions. Signed-off-by: Pranith Kumar Signed-off-by: Tomi Valkeinen --- drivers/video/fbdev/chipsfb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/video') diff --git a/drivers/video/fbdev/chipsfb.c b/drivers/video/fbdev/chipsfb.c index 206a66b61072..59abdc6a97f6 100644 --- a/drivers/video/fbdev/chipsfb.c +++ b/drivers/video/fbdev/chipsfb.c @@ -273,7 +273,7 @@ static struct chips_init_reg chips_init_xr[] = { { 0xa8, 0x00 } }; -static void __init chips_hw_init(void) +static void chips_hw_init(void) { int i; -- cgit v1.2.1 From 2b6c53b1504865728a6dfad3e720918a2f89f3a5 Mon Sep 17 00:00:00 2001 From: "Jon Medhurst (Tixy)" Date: Wed, 20 Aug 2014 13:41:04 +0100 Subject: video: ARM CLCD: Fix calculation of bits-per-pixel If the device-tree specifies a max-memory-bandwidth property then the CLCD driver uses that to calculate the bits-per-pixel supported, however, this calculation is faulty for two reasons. 1. It doesn't ensure that the result is a sane value, i.e. a power of 2 and <= 32 as the rest of the code assumes. 2. It uses the displayed resolution and calculates the average bandwidth across the whole frame. It should instead calculate the peak bandwidth based on the pixel clock. This patch fixes both the above. Signed-off-by: Jon Medhurst Acked-by: Pawel Moll Signed-off-by: Tomi Valkeinen --- drivers/video/fbdev/amba-clcd.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) (limited to 'drivers/video') diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c index beadd3edaa17..a7b6217ac87b 100644 --- a/drivers/video/fbdev/amba-clcd.c +++ b/drivers/video/fbdev/amba-clcd.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -650,6 +651,7 @@ static int clcdfb_of_init_display(struct clcd_fb *fb) { struct device_node *endpoint; int err; + unsigned int bpp; u32 max_bandwidth; u32 tft_r0b0g0[3]; @@ -667,11 +669,22 @@ static int clcdfb_of_init_display(struct clcd_fb *fb) err = of_property_read_u32(fb->dev->dev.of_node, "max-memory-bandwidth", &max_bandwidth); - if (!err) - fb->panel->bpp = 8 * max_bandwidth / (fb->panel->mode.xres * - fb->panel->mode.yres * fb->panel->mode.refresh); - else - fb->panel->bpp = 32; + if (!err) { + /* + * max_bandwidth is in bytes per second and pixclock in + * pico-seconds, so the maximum allowed bits per pixel is + * 8 * max_bandwidth / (PICOS2KHZ(pixclock) * 1000) + * Rearrange this calculation to avoid overflow and then ensure + * result is a valid format. + */ + bpp = max_bandwidth / (1000 / 8) + / PICOS2KHZ(fb->panel->mode.pixclock); + bpp = rounddown_pow_of_two(bpp); + if (bpp > 32) + bpp = 32; + } else + bpp = 32; + fb->panel->bpp = bpp; #ifdef CONFIG_CPU_BIG_ENDIAN fb->panel->cntl |= CNTL_BEBO; -- cgit v1.2.1 From 6c131850eca653344c41d68ce87f3ab5a89af89e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 6 Aug 2014 22:12:18 +0200 Subject: drivers: video: fbdev: atmel_lcdfb.c: fix error return code Convert a zero return value on error to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Acked-by: Nicolas Ferre Signed-off-by: Tomi Valkeinen --- drivers/video/fbdev/atmel_lcdfb.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/video') diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c index 92640d46770a..1d8bdb92939b 100644 --- a/drivers/video/fbdev/atmel_lcdfb.c +++ b/drivers/video/fbdev/atmel_lcdfb.c @@ -1102,12 +1102,14 @@ static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) timings = of_get_display_timings(display_np); if (!timings) { dev_err(dev, "failed to get display timings\n"); + ret = -EINVAL; goto put_display_node; } timings_np = of_find_node_by_name(display_np, "display-timings"); if (!timings_np) { dev_err(dev, "failed to find display-timings node\n"); + ret = -ENODEV; goto put_display_node; } -- cgit v1.2.1 From 62795a0d81970bfdd5866ffd87160c670a6b344c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 11 Jul 2014 12:21:36 +0300 Subject: video: of: display_timing: double free on error The display_timings_release() function frees "disp" and we free it again on the next line. Signed-off-by: Dan Carpenter Signed-off-by: Tomi Valkeinen --- drivers/video/of_display_timing.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/video') diff --git a/drivers/video/of_display_timing.c b/drivers/video/of_display_timing.c index 987edf110038..5c098d5b4043 100644 --- a/drivers/video/of_display_timing.c +++ b/drivers/video/of_display_timing.c @@ -236,6 +236,7 @@ timingfail: if (native_mode) of_node_put(native_mode); display_timings_release(disp); + disp = NULL; entryfail: kfree(disp); dispfail: -- cgit v1.2.1 From 4d4e2c003bd6c6bdd85080bd096d54d5d251defa Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Thu, 3 Jul 2014 14:46:39 +0100 Subject: video: da8xx-fb: preserve display width when changing HSYNC When looking at this driver for a client, I noticed the code that configures the HSYNC pulse clobbers the display width in the same register. It only preserves the MS part of the width in bit 3 and zeros the LS part of the width in bits 9 to 4. This doesn't matter during initialization as the width is configured afterwards, but subsequent use of the FBIPUT_HSYNC ioctl would clobber the width. Preserve bits 9 to 0 of LCD_RASTER_TIMING_0_REG when configuring the horizontal sync. Signed-off-by: Ian Abbott Signed-off-by: Tomi Valkeinen --- drivers/video/fbdev/da8xx-fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/video') diff --git a/drivers/video/fbdev/da8xx-fb.c b/drivers/video/fbdev/da8xx-fb.c index 788f6b37fce7..10c876c95772 100644 --- a/drivers/video/fbdev/da8xx-fb.c +++ b/drivers/video/fbdev/da8xx-fb.c @@ -419,7 +419,7 @@ static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width, { u32 reg; - reg = lcdc_read(LCD_RASTER_TIMING_0_REG) & 0xf; + reg = lcdc_read(LCD_RASTER_TIMING_0_REG) & 0x3ff; reg |= (((back_porch-1) & 0xff) << 24) | (((front_porch-1) & 0xff) << 16) | (((pulse_width-1) & 0x3f) << 10); -- cgit v1.2.1