From d3b4aa519c2c916c76ce7d83fa7288a6fd9ad9ac Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Mon, 30 Jul 2012 19:12:02 -0500
Subject: OMAPDSS: HDMI: Disable PLL properly in case of error at power_on

Small patch to disable the PLL appropriately before runtime_put in case
an error occurs while enabling the PHY.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/hdmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 060216fdc578..a65dafaa0d72 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -501,7 +501,7 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 	r = hdmi.ip_data.ops->phy_enable(&hdmi.ip_data);
 	if (r) {
 		DSSDBG("Failed to start PHY\n");
-		goto err;
+		goto err_phy_enable;
 	}
 
 	hdmi.ip_data.ops->video_configure(&hdmi.ip_data);
@@ -537,6 +537,7 @@ err_mgr_enable:
 	hdmi.ip_data.ops->video_disable(&hdmi.ip_data);
 err_vid_enable:
 	hdmi.ip_data.ops->phy_disable(&hdmi.ip_data);
+err_phy_enable:
 	hdmi.ip_data.ops->pll_disable(&hdmi.ip_data);
 err:
 	hdmi_runtime_put();
-- 
cgit v1.2.1


From d7ad718d359789c8c9190547bbc0294aeba506e2 Mon Sep 17 00:00:00 2001
From: Jassi Brar <jaswinder.singh@linaro.org>
Date: Tue, 24 Jul 2012 19:33:55 +0530
Subject: OMAPDSS: DISPC: Use msleep instead of blocking mdelay

We have no reason to block in the error handler workqueue, so use msleep.

Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 5b289c5f695b..ff52702dfd2f 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3491,7 +3491,7 @@ static void dispc_error_worker(struct work_struct *work)
 					ovl->name);
 			dispc_ovl_enable(ovl->id, false);
 			dispc_mgr_go(ovl->manager->id);
-			mdelay(50);
+			msleep(50);
 		}
 	}
 
@@ -3523,7 +3523,7 @@ static void dispc_error_worker(struct work_struct *work)
 			}
 
 			dispc_mgr_go(mgr->id);
-			mdelay(50);
+			msleep(50);
 
 			if (enable)
 				dssdev->driver->enable(dssdev);
-- 
cgit v1.2.1


From 8aa2eed1348d615817de792cd205868348a5293d Mon Sep 17 00:00:00 2001
From: Ricardo Neri <ricardo.neri@ti.com>
Date: Wed, 1 Aug 2012 07:56:40 -0500
Subject: OMAPDSS: DISPC: Improvements to DIGIT sync signal selection

DSS code wrongly assumes that VENC is always available as source for the external
sync signal for the display controller DIGIT channel. One cannot blindly write/read
the value of DSS_CONTROL[15] as in certain processors (e.g., OMAP5) this operation
may not be valid. If the the sync source is not read correctly, the callers of
dss_get_hdmi_venc_clk_source might make wrong assumptions about, for instance,
video timings.

Logic is added to correctly get the sync signal based on the available displays
in the DIGIT channel. The source is set only if both VENC and HDMI are supported.

Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dss.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 04b4586113e3..4491ab7ef800 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -648,9 +648,18 @@ void dss_set_dac_pwrdn_bgz(bool enable)
 	REG_FLD_MOD(DSS_CONTROL, enable, 5, 5);	/* DAC Power-Down Control */
 }
 
-void dss_select_hdmi_venc_clk_source(enum dss_hdmi_venc_clk_source_select hdmi)
+void dss_select_hdmi_venc_clk_source(enum dss_hdmi_venc_clk_source_select src)
 {
-	REG_FLD_MOD(DSS_CONTROL, hdmi, 15, 15);	/* VENC_HDMI_SWITCH */
+	enum omap_display_type dp;
+	dp = dss_feat_get_supported_displays(OMAP_DSS_CHANNEL_DIGIT);
+
+	/* Complain about invalid selections */
+	WARN_ON((src == DSS_VENC_TV_CLK) && !(dp & OMAP_DISPLAY_TYPE_VENC));
+	WARN_ON((src == DSS_HDMI_M_PCLK) && !(dp & OMAP_DISPLAY_TYPE_HDMI));
+
+	/* Select only if we have options */
+	if ((dp & OMAP_DISPLAY_TYPE_VENC) && (dp & OMAP_DISPLAY_TYPE_HDMI))
+		REG_FLD_MOD(DSS_CONTROL, src, 15, 15);	/* VENC_HDMI_SWITCH */
 }
 
 enum dss_hdmi_venc_clk_source_select dss_get_hdmi_venc_clk_source(void)
@@ -661,6 +670,9 @@ enum dss_hdmi_venc_clk_source_select dss_get_hdmi_venc_clk_source(void)
 	if ((displays & OMAP_DISPLAY_TYPE_HDMI) == 0)
 		return DSS_VENC_TV_CLK;
 
+	if ((displays & OMAP_DISPLAY_TYPE_VENC) == 0)
+		return DSS_HDMI_M_PCLK;
+
 	return REG_GET(DSS_CONTROL, 15, 15);
 }
 
-- 
cgit v1.2.1


From a2496dc9427a4f8d7db47a09ac9bb194b233fe88 Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Sat, 4 Aug 2012 19:19:13 +0300
Subject: OMAPFB: fix framebuffer console colors

omapfb does not currently set pseudo palette correctly for color depths
above 16bpp, making red text invisible, command like
  echo -e '\e[0;31mRED' > /dev/tty1
will display nothing on framebuffer console in 24bpp mode.
This is because temporary variable is declared incorrectly, fix it.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/omapfb/omapfb-main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 08ec1a7103f2..fc671d3d8004 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1192,7 +1192,7 @@ static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green,
 			break;
 
 		if (regno < 16) {
-			u16 pal;
+			u32 pal;
 			pal = ((red >> (16 - var->red.length)) <<
 					var->red.offset) |
 				((green >> (16 - var->green.length)) <<
-- 
cgit v1.2.1


From 27dfddc7fe3bbc87935c078f3d078a9ed69dbf4a Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Thu, 19 Jul 2012 13:51:14 +0530
Subject: OMAPDSS: APPLY: Constify timings argument in dss_mgr_set_timings

The function dss_mgr_set_timings is supposed to apply timings passed by an
interface driver. It is not supposed to change the timings. Add const qualifier
to the omap_video_timings pointer argument in dss_mgr_set_timings().

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/apply.c | 4 ++--
 drivers/video/omap2/dss/dss.h   | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 0fefc68372b9..52a5940a3773 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -1302,7 +1302,7 @@ err:
 }
 
 static void dss_apply_mgr_timings(struct omap_overlay_manager *mgr,
-		struct omap_video_timings *timings)
+		const struct omap_video_timings *timings)
 {
 	struct mgr_priv_data *mp = get_mgr_priv(mgr);
 
@@ -1311,7 +1311,7 @@ static void dss_apply_mgr_timings(struct omap_overlay_manager *mgr,
 }
 
 void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
-		struct omap_video_timings *timings)
+		const struct omap_video_timings *timings)
 {
 	unsigned long flags;
 
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index f67afe76f217..3682e3f78426 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -206,7 +206,7 @@ int dss_mgr_set_device(struct omap_overlay_manager *mgr,
 		struct omap_dss_device *dssdev);
 int dss_mgr_unset_device(struct omap_overlay_manager *mgr);
 void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
-		struct omap_video_timings *timings);
+		const struct omap_video_timings *timings);
 void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
 		const struct dss_lcd_mgr_config *config);
 const struct omap_video_timings *dss_mgr_get_timings(struct omap_overlay_manager *mgr);
-- 
cgit v1.2.1


From c8a5e4e86d998274306dc906f5a24bb0e96aa14c Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Thu, 5 Jul 2012 12:52:46 +0530
Subject: OMAPDSS: DPI: Add locking for DPI interface

The DPI interface driver currently relies on the panel driver to ensure calls
like omapdss_dpi_display_enable() and omapdss_dpi_display_disable() are executed
sequentially. Also, currently, there is no way to protect the DPI driver data.

All DPI panel drivers don't ensure this, and in general, a DPI panel driver
should use it's lock to that ensure it's own driver data and omap_dss_device
states are taken care of, and not worry about the DPI interface.

Add mutex locking in the DPI enable/disable/set_timings ops.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dpi.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 3266be23fc0d..15c2c3301f48 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -39,6 +39,8 @@ static struct {
 	struct regulator *vdds_dsi_reg;
 	struct platform_device *dsidev;
 
+	struct mutex lock;
+
 	struct dss_lcd_mgr_config mgr_config;
 } dpi;
 
@@ -169,14 +171,18 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
 {
 	int r;
 
+	mutex_lock(&dpi.lock);
+
 	if (cpu_is_omap34xx() && !dpi.vdds_dsi_reg) {
 		DSSERR("no VDSS_DSI regulator\n");
-		return -ENODEV;
+		r = -ENODEV;
+		goto err_no_reg;
 	}
 
 	if (dssdev->manager == NULL) {
 		DSSERR("failed to enable display: no manager\n");
-		return -ENODEV;
+		r = -ENODEV;
+		goto err_no_mgr;
 	}
 
 	r = omap_dss_start_device(dssdev);
@@ -217,6 +223,8 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
 	if (r)
 		goto err_mgr_enable;
 
+	mutex_unlock(&dpi.lock);
+
 	return 0;
 
 err_mgr_enable:
@@ -234,12 +242,17 @@ err_get_dispc:
 err_reg_enable:
 	omap_dss_stop_device(dssdev);
 err_start_dev:
+err_no_mgr:
+err_no_reg:
+	mutex_unlock(&dpi.lock);
 	return r;
 }
 EXPORT_SYMBOL(omapdss_dpi_display_enable);
 
 void omapdss_dpi_display_disable(struct omap_dss_device *dssdev)
 {
+	mutex_lock(&dpi.lock);
+
 	dss_mgr_disable(dssdev->manager);
 
 	if (dpi_use_dsi_pll(dssdev)) {
@@ -254,6 +267,8 @@ void omapdss_dpi_display_disable(struct omap_dss_device *dssdev)
 		regulator_disable(dpi.vdds_dsi_reg);
 
 	omap_dss_stop_device(dssdev);
+
+	mutex_unlock(&dpi.lock);
 }
 EXPORT_SYMBOL(omapdss_dpi_display_disable);
 
@@ -263,6 +278,9 @@ void dpi_set_timings(struct omap_dss_device *dssdev,
 	int r;
 
 	DSSDBG("dpi_set_timings\n");
+
+	mutex_lock(&dpi.lock);
+
 	dssdev->panel.timings = *timings;
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
 		r = dispc_runtime_get();
@@ -275,6 +293,8 @@ void dpi_set_timings(struct omap_dss_device *dssdev,
 	} else {
 		dss_mgr_set_timings(dssdev->manager, timings);
 	}
+
+	mutex_unlock(&dpi.lock);
 }
 EXPORT_SYMBOL(dpi_set_timings);
 
@@ -377,6 +397,8 @@ static void __init dpi_probe_pdata(struct platform_device *pdev)
 
 static int __init omap_dpi_probe(struct platform_device *pdev)
 {
+	mutex_init(&dpi.lock);
+
 	dpi_probe_pdata(pdev);
 
 	return 0;
-- 
cgit v1.2.1


From e19d659bbf040823048101c31e3b213d13dd815f Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Wed, 8 Aug 2012 14:20:30 +0530
Subject: OMAPDSS: Displays: Add locking in generic DPI panel driver

The generic DPI panel driver doesn't currently have locking to ensure that
the display states and the driver data is maintained correctly. Add mutex
locking to take care of this. Add a new get_timings driver op to override the
default get_timings op. The new driver op contains locking to ensure the correct
panel timings are seen when a DSS2 user calls device->driver->get_timings.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/displays/panel-generic-dpi.c | 69 +++++++++++++++++++++---
 1 file changed, 62 insertions(+), 7 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
index bc5af2500eb9..69e78a55283a 100644
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ b/drivers/video/omap2/displays/panel-generic-dpi.c
@@ -545,6 +545,8 @@ struct panel_drv_data {
 	struct omap_dss_device *dssdev;
 
 	struct panel_config *panel_config;
+
+	struct mutex lock;
 };
 
 static inline struct panel_generic_dpi_data
@@ -634,6 +636,8 @@ static int generic_dpi_panel_probe(struct omap_dss_device *dssdev)
 	drv_data->dssdev = dssdev;
 	drv_data->panel_config = panel_config;
 
+	mutex_init(&drv_data->lock);
+
 	dev_set_drvdata(&dssdev->dev, drv_data);
 
 	return 0;
@@ -652,56 +656,106 @@ static void __exit generic_dpi_panel_remove(struct omap_dss_device *dssdev)
 
 static int generic_dpi_panel_enable(struct omap_dss_device *dssdev)
 {
-	int r = 0;
+	struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	mutex_lock(&drv_data->lock);
 
 	r = generic_dpi_panel_power_on(dssdev);
 	if (r)
-		return r;
+		goto err;
 
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+err:
+	mutex_unlock(&drv_data->lock);
 
-	return 0;
+	return r;
 }
 
 static void generic_dpi_panel_disable(struct omap_dss_device *dssdev)
 {
+	struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev);
+
+	mutex_lock(&drv_data->lock);
+
 	generic_dpi_panel_power_off(dssdev);
 
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+
+	mutex_unlock(&drv_data->lock);
 }
 
 static int generic_dpi_panel_suspend(struct omap_dss_device *dssdev)
 {
+	struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev);
+
+	mutex_lock(&drv_data->lock);
+
 	generic_dpi_panel_power_off(dssdev);
 
 	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
 
+	mutex_unlock(&drv_data->lock);
+
 	return 0;
 }
 
 static int generic_dpi_panel_resume(struct omap_dss_device *dssdev)
 {
-	int r = 0;
+	struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	mutex_lock(&drv_data->lock);
 
 	r = generic_dpi_panel_power_on(dssdev);
 	if (r)
-		return r;
+		goto err;
 
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
-	return 0;
+err:
+	mutex_unlock(&drv_data->lock);
+
+	return r;
 }
 
 static void generic_dpi_panel_set_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
+	struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev);
+
+	mutex_lock(&drv_data->lock);
+
 	dpi_set_timings(dssdev, timings);
+
+	mutex_unlock(&drv_data->lock);
+}
+
+static void generic_dpi_panel_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev);
+
+	mutex_lock(&drv_data->lock);
+
+	*timings = dssdev->panel.timings;
+
+	mutex_unlock(&drv_data->lock);
 }
 
 static int generic_dpi_panel_check_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
-	return dpi_check_timings(dssdev, timings);
+	struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev);
+	int r;
+
+	mutex_lock(&drv_data->lock);
+
+	r = dpi_check_timings(dssdev, timings);
+
+	mutex_unlock(&drv_data->lock);
+
+	return r;
 }
 
 static struct omap_dss_driver dpi_driver = {
@@ -714,6 +768,7 @@ static struct omap_dss_driver dpi_driver = {
 	.resume		= generic_dpi_panel_resume,
 
 	.set_timings	= generic_dpi_panel_set_timings,
+	.get_timings	= generic_dpi_panel_get_timings,
 	.check_timings	= generic_dpi_panel_check_timings,
 
 	.driver         = {
-- 
cgit v1.2.1


From c499144c3b69a657b5dfd707b35871e066fabd3a Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Wed, 8 Aug 2012 14:28:54 +0530
Subject: OMAPDSS: DPI: Maintain our own timings field in driver data

The DPI driver currently relies on the timings in omap_dss_device struct to
configure the DISPC accordingly. This makes the DPI interface driver dependent
on the omap_dss_device struct.

Make the DPI driver data maintain it's own timings field. The panel driver is
expected to call dpi_set_timings()(renamed to omapdss_dpi_set_timings) to set
these timings before the panel is enabled.

In the set_timings() op, we still ensure that the omap_dss_device timings
(dssdev->panel.timings) are configured. This will later be configured only by
the DPI panel drivers.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/displays/panel-generic-dpi.c        |  4 +++-
 drivers/video/omap2/displays/panel-lgphilips-lb035q02.c |  2 ++
 drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c |  2 ++
 drivers/video/omap2/displays/panel-picodlp.c            |  3 +++
 drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c  |  2 ++
 drivers/video/omap2/displays/panel-tfp410.c             |  4 +++-
 drivers/video/omap2/displays/panel-tpo-td043mtea1.c     |  4 +++-
 drivers/video/omap2/dss/dpi.c                           | 11 +++++++----
 8 files changed, 25 insertions(+), 7 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
index 69e78a55283a..8d4e102bb0e6 100644
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ b/drivers/video/omap2/displays/panel-generic-dpi.c
@@ -565,6 +565,8 @@ static int generic_dpi_panel_power_on(struct omap_dss_device *dssdev)
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
 		return 0;
 
+	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+
 	r = omapdss_dpi_display_enable(dssdev);
 	if (r)
 		goto err0;
@@ -726,7 +728,7 @@ static void generic_dpi_panel_set_timings(struct omap_dss_device *dssdev,
 
 	mutex_lock(&drv_data->lock);
 
-	dpi_set_timings(dssdev, timings);
+	omapdss_dpi_set_timings(dssdev, timings);
 
 	mutex_unlock(&drv_data->lock);
 }
diff --git a/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
index 802807798846..7e52aee36f4f 100644
--- a/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
@@ -55,6 +55,8 @@ static int lb035q02_panel_power_on(struct omap_dss_device *dssdev)
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
 		return 0;
 
+	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+
 	r = omapdss_dpi_display_enable(dssdev);
 	if (r)
 		goto err0;
diff --git a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
index b122b0f31c43..e501c401ccb0 100644
--- a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
+++ b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
@@ -175,6 +175,8 @@ static int nec_8048_panel_power_on(struct omap_dss_device *dssdev)
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
 		return 0;
 
+	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+
 	r = omapdss_dpi_display_enable(dssdev);
 	if (r)
 		goto err0;
diff --git a/drivers/video/omap2/displays/panel-picodlp.c b/drivers/video/omap2/displays/panel-picodlp.c
index 2d35bd388860..0d7a8ff50f16 100644
--- a/drivers/video/omap2/displays/panel-picodlp.c
+++ b/drivers/video/omap2/displays/panel-picodlp.c
@@ -377,6 +377,9 @@ static int picodlp_panel_power_on(struct omap_dss_device *dssdev)
 	 * then only i2c commands can be successfully sent to dpp2600
 	 */
 	msleep(1000);
+
+	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+
 	r = omapdss_dpi_display_enable(dssdev);
 	if (r) {
 		dev_err(&dssdev->dev, "failed to enable DPI\n");
diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
index bd86ba9ccf76..1486a81fc8b6 100644
--- a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
@@ -142,6 +142,8 @@ static int sharp_ls_power_on(struct omap_dss_device *dssdev)
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
 		return 0;
 
+	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+
 	r = omapdss_dpi_display_enable(dssdev);
 	if (r)
 		goto err0;
diff --git a/drivers/video/omap2/displays/panel-tfp410.c b/drivers/video/omap2/displays/panel-tfp410.c
index 40cc0cfa5d17..c6f950321f21 100644
--- a/drivers/video/omap2/displays/panel-tfp410.c
+++ b/drivers/video/omap2/displays/panel-tfp410.c
@@ -65,6 +65,8 @@ static int tfp410_power_on(struct omap_dss_device *dssdev)
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
 		return 0;
 
+	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+
 	r = omapdss_dpi_display_enable(dssdev);
 	if (r)
 		goto err0;
@@ -231,7 +233,7 @@ static void tfp410_set_timings(struct omap_dss_device *dssdev,
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
 
 	mutex_lock(&ddata->lock);
-	dpi_set_timings(dssdev, timings);
+	omapdss_dpi_set_timings(dssdev, timings);
 	mutex_unlock(&ddata->lock);
 }
 
diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
index fa7baa650ae0..ecb163e4cfaf 100644
--- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
@@ -337,6 +337,8 @@ static int tpo_td043_enable_dss(struct omap_dss_device *dssdev)
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
 		return 0;
 
+	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+
 	r = omapdss_dpi_display_enable(dssdev);
 	if (r)
 		goto err0;
@@ -480,7 +482,7 @@ static void tpo_td043_remove(struct omap_dss_device *dssdev)
 static void tpo_td043_set_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
-	dpi_set_timings(dssdev, timings);
+	omapdss_dpi_set_timings(dssdev, timings);
 }
 
 static int tpo_td043_check_timings(struct omap_dss_device *dssdev,
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 15c2c3301f48..97c7a10bc9ff 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -41,6 +41,7 @@ static struct {
 
 	struct mutex lock;
 
+	struct omap_video_timings timings;
 	struct dss_lcd_mgr_config mgr_config;
 } dpi;
 
@@ -123,7 +124,7 @@ static int dpi_set_dispc_clk(struct omap_dss_device *dssdev,
 
 static int dpi_set_mode(struct omap_dss_device *dssdev)
 {
-	struct omap_video_timings *t = &dssdev->panel.timings;
+	struct omap_video_timings *t = &dpi.timings;
 	int lck_div = 0, pck_div = 0;
 	unsigned long fck = 0;
 	unsigned long pck;
@@ -272,8 +273,8 @@ void omapdss_dpi_display_disable(struct omap_dss_device *dssdev)
 }
 EXPORT_SYMBOL(omapdss_dpi_display_disable);
 
-void dpi_set_timings(struct omap_dss_device *dssdev,
-			struct omap_video_timings *timings)
+void omapdss_dpi_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
 {
 	int r;
 
@@ -281,7 +282,9 @@ void dpi_set_timings(struct omap_dss_device *dssdev,
 
 	mutex_lock(&dpi.lock);
 
+	dpi.timings = *timings;
 	dssdev->panel.timings = *timings;
+
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
 		r = dispc_runtime_get();
 		if (r)
@@ -296,7 +299,7 @@ void dpi_set_timings(struct omap_dss_device *dssdev,
 
 	mutex_unlock(&dpi.lock);
 }
-EXPORT_SYMBOL(dpi_set_timings);
+EXPORT_SYMBOL(omapdss_dpi_set_timings);
 
 int dpi_check_timings(struct omap_dss_device *dssdev,
 			struct omap_video_timings *timings)
-- 
cgit v1.2.1


From bdcae3cc39e8232eca81504a2ff9c60f4cc8f22d Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Wed, 8 Aug 2012 14:29:48 +0530
Subject: OMAPDSS: DPI displays: Take care of panel timings in the driver
 itself

The timings maintained in omap_dss_device(dssdev->panel.timings) should be
maintained by the panel driver itself. It's the panel drivers responsibility
to update it if a new set of timings is to be configured. The DPI interface
driver shouldn't be responsible of updating the panel timings, it's responsible
of maintianing it's own copy of timings.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/displays/panel-generic-dpi.c    | 2 ++
 drivers/video/omap2/displays/panel-tfp410.c         | 1 +
 drivers/video/omap2/displays/panel-tpo-td043mtea1.c | 2 ++
 drivers/video/omap2/dss/dpi.c                       | 1 -
 4 files changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
index 8d4e102bb0e6..a07e18c8f71b 100644
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ b/drivers/video/omap2/displays/panel-generic-dpi.c
@@ -730,6 +730,8 @@ static void generic_dpi_panel_set_timings(struct omap_dss_device *dssdev,
 
 	omapdss_dpi_set_timings(dssdev, timings);
 
+	dssdev->panel.timings = *timings;
+
 	mutex_unlock(&drv_data->lock);
 }
 
diff --git a/drivers/video/omap2/displays/panel-tfp410.c b/drivers/video/omap2/displays/panel-tfp410.c
index c6f950321f21..9397236084b1 100644
--- a/drivers/video/omap2/displays/panel-tfp410.c
+++ b/drivers/video/omap2/displays/panel-tfp410.c
@@ -234,6 +234,7 @@ static void tfp410_set_timings(struct omap_dss_device *dssdev,
 
 	mutex_lock(&ddata->lock);
 	omapdss_dpi_set_timings(dssdev, timings);
+	dssdev->panel.timings = *timings;
 	mutex_unlock(&ddata->lock);
 }
 
diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
index ecb163e4cfaf..3f47f5f594b4 100644
--- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
@@ -483,6 +483,8 @@ static void tpo_td043_set_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
 	omapdss_dpi_set_timings(dssdev, timings);
+
+	dssdev->panel.timings = *timings;
 }
 
 static int tpo_td043_check_timings(struct omap_dss_device *dssdev,
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 97c7a10bc9ff..d561a9198a8d 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -283,7 +283,6 @@ void omapdss_dpi_set_timings(struct omap_dss_device *dssdev,
 	mutex_lock(&dpi.lock);
 
 	dpi.timings = *timings;
-	dssdev->panel.timings = *timings;
 
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
 		r = dispc_runtime_get();
-- 
cgit v1.2.1


From e67458a831e280d346c87d22eed87e3e8697e077 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 13 Aug 2012 14:17:30 +0530
Subject: OMAPDSS: DSI: Maintain own copy of timings in driver data

The DSI driver currently relies on the timings in omap_dss_device struct to
configure the DISPC and DSI blocks accordingly. This makes the DSI interface
driver dependent on the omap_dss_device struct.

Make the DSI driver data maintain it's own timings field. A DSI video mode panel
driver is expected to call omapdss_dsi_set_timings() to set these timings before
the panel is enabled.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dsi.c | 58 +++++++++++++++++++++++++++----------------
 1 file changed, 36 insertions(+), 22 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index b07e8864f82f..4787e469131b 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -333,6 +333,7 @@ struct dsi_data {
 	unsigned scp_clk_refcount;
 
 	struct dss_lcd_mgr_config mgr_config;
+	struct omap_video_timings timings;
 };
 
 struct dsi_packet_sent_handler_data {
@@ -3610,9 +3611,10 @@ static void dsi_config_vp_num_line_buffers(struct omap_dss_device *dssdev)
 	int num_line_buffers;
 
 	if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) {
+		struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 		int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
 		unsigned line_buf_size = dsi_get_line_buf_size(dsidev);
-		struct omap_video_timings *timings = &dssdev->panel.timings;
+		struct omap_video_timings *timings = &dsi->timings;
 		/*
 		 * Don't use line buffers if width is greater than the video
 		 * port's line buffer size
@@ -3741,7 +3743,7 @@ static void dsi_config_cmd_mode_interleaving(struct omap_dss_device *dssdev)
 	int ddr_clk_pre, ddr_clk_post, enter_hs_mode_lat, exit_hs_mode_lat;
 	int tclk_trail, ths_exit, exiths_clk;
 	bool ddr_alwon;
-	struct omap_video_timings *timings = &dssdev->panel.timings;
+	struct omap_video_timings *timings = &dsi->timings;
 	int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
 	int ndl = dsi->num_lanes_used - 1;
 	int dsi_fclk_hsdiv = dssdev->clocks.dsi.regm_dsi + 1;
@@ -3994,7 +3996,7 @@ static void dsi_proto_timings(struct omap_dss_device *dssdev)
 		int vbp = dssdev->panel.dsi_vm_data.vbp;
 		int window_sync = dssdev->panel.dsi_vm_data.window_sync;
 		bool hsync_end = dssdev->panel.dsi_vm_data.vp_hsync_end;
-		struct omap_video_timings *timings = &dssdev->panel.timings;
+		struct omap_video_timings *timings = &dsi->timings;
 		int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
 		int tl, t_he, width_bytes;
 
@@ -4103,6 +4105,7 @@ EXPORT_SYMBOL(omapdss_dsi_configure_pins);
 int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
 	u8 data_type;
 	u16 word_count;
@@ -4133,7 +4136,7 @@ int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 		/* MODE, 1 = video mode */
 		REG_FLD_MOD(dsidev, DSI_VC_CTRL(channel), 1, 4, 4);
 
-		word_count = DIV_ROUND_UP(dssdev->panel.timings.x_res * bpp, 8);
+		word_count = DIV_ROUND_UP(dsi->timings.x_res * bpp, 8);
 
 		dsi_vc_write_long_header(dsidev, channel, data_type,
 				word_count, 0);
@@ -4367,7 +4370,6 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
-	struct omap_video_timings timings;
 	int r;
 	u32 irq = 0;
 
@@ -4376,14 +4378,14 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 
 		dssdev->driver->get_resolution(dssdev, &dw, &dh);
 
-		timings.x_res = dw;
-		timings.y_res = dh;
-		timings.hsw = 1;
-		timings.hfp = 1;
-		timings.hbp = 1;
-		timings.vsw = 1;
-		timings.vfp = 0;
-		timings.vbp = 0;
+		dsi->timings.x_res = dw;
+		dsi->timings.y_res = dh;
+		dsi->timings.hsw = 1;
+		dsi->timings.hfp = 1;
+		dsi->timings.hbp = 1;
+		dsi->timings.vsw = 1;
+		dsi->timings.vfp = 0;
+		dsi->timings.vbp = 0;
 
 		irq = dispc_mgr_get_framedone_irq(dssdev->manager->id);
 
@@ -4397,8 +4399,6 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 		dsi->mgr_config.stallmode = true;
 		dsi->mgr_config.fifohandcheck = true;
 	} else {
-		timings = dssdev->panel.timings;
-
 		dsi->mgr_config.stallmode = false;
 		dsi->mgr_config.fifohandcheck = false;
 	}
@@ -4407,14 +4407,14 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 	 * override interlace, logic level and edge related parameters in
 	 * omap_video_timings with default values
 	 */
-	timings.interlace = false;
-	timings.hsync_level = OMAPDSS_SIG_ACTIVE_HIGH;
-	timings.vsync_level = OMAPDSS_SIG_ACTIVE_HIGH;
-	timings.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
-	timings.de_level = OMAPDSS_SIG_ACTIVE_HIGH;
-	timings.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES;
+	dsi->timings.interlace = false;
+	dsi->timings.hsync_level = OMAPDSS_SIG_ACTIVE_HIGH;
+	dsi->timings.vsync_level = OMAPDSS_SIG_ACTIVE_HIGH;
+	dsi->timings.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
+	dsi->timings.de_level = OMAPDSS_SIG_ACTIVE_HIGH;
+	dsi->timings.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES;
 
-	dss_mgr_set_timings(dssdev->manager, &timings);
+	dss_mgr_set_timings(dssdev->manager, &dsi->timings);
 
 	r = dsi_configure_dispc_clocks(dssdev);
 	if (r)
@@ -4653,6 +4653,20 @@ int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable)
 }
 EXPORT_SYMBOL(omapdss_dsi_enable_te);
 
+void omapdss_dsi_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+
+	mutex_lock(&dsi->lock);
+
+	dsi->timings = *timings;
+
+	mutex_unlock(&dsi->lock);
+}
+EXPORT_SYMBOL(omapdss_dsi_set_timings);
+
 static int __init dsi_init_display(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
-- 
cgit v1.2.1


From e352574db53a15789339cf09527604f7e23de2e4 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Thu, 9 Aug 2012 15:23:43 +0530
Subject: OMAPDSS: DSI: Add function to set panel size for command mode panels

DSI command mode panels don't need to configure a full set of timings to
configure DSI, they only require the width and the height of the panel in
pixels.

Use omapdss_dsi_set_size for command mode panels, omapdss_dsi_set_timings is
meant for video mode panels. When performing rotation via chaning the address
mode of the panel, we would need to swap width and height when doing 90 or 270
rotation. Make sure that omapdss_dsi_set_size() makes the new width and height
visible to DSI.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/displays/panel-taal.c | 14 ++++++++++++++
 drivers/video/omap2/dss/dsi.c             | 23 ++++++++++++++++-------
 2 files changed, 30 insertions(+), 7 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 3f5acc7771da..c3bca2fb15d4 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -1060,6 +1060,9 @@ static int taal_power_on(struct omap_dss_device *dssdev)
 		goto err0;
 	};
 
+	omapdss_dsi_set_size(dssdev, dssdev->panel.timings.x_res,
+		dssdev->panel.timings.y_res);
+
 	r = omapdss_dsi_display_enable(dssdev);
 	if (r) {
 		dev_err(&dssdev->dev, "failed to enable DSI\n");
@@ -1487,6 +1490,7 @@ static int taal_get_te(struct omap_dss_device *dssdev)
 static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	u16 dw, dh;
 	int r;
 
 	dev_dbg(&dssdev->dev, "rotate %d\n", rotate);
@@ -1508,6 +1512,16 @@ static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
 			goto err;
 	}
 
+	if (rotate == 0 || rotate == 2) {
+		dw = dssdev->panel.timings.x_res;
+		dh = dssdev->panel.timings.y_res;
+	} else {
+		dw = dssdev->panel.timings.y_res;
+		dh = dssdev->panel.timings.x_res;
+	}
+
+	omapdss_dsi_set_size(dssdev, dw, dh);
+
 	td->rotate = rotate;
 
 	dsi_bus_unlock(dssdev);
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 4787e469131b..da68a2f93104 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4328,7 +4328,8 @@ int omap_dsi_update(struct omap_dss_device *dssdev, int channel,
 	dsi->framedone_callback = callback;
 	dsi->framedone_data = data;
 
-	dssdev->driver->get_resolution(dssdev, &dw, &dh);
+	dw = dsi->timings.x_res;
+	dh = dsi->timings.y_res;
 
 #ifdef DEBUG
 	dsi->update_bytes = dw * dh *
@@ -4374,12 +4375,6 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 	u32 irq = 0;
 
 	if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_CMD_MODE) {
-		u16 dw, dh;
-
-		dssdev->driver->get_resolution(dssdev, &dw, &dh);
-
-		dsi->timings.x_res = dw;
-		dsi->timings.y_res = dh;
 		dsi->timings.hsw = 1;
 		dsi->timings.hfp = 1;
 		dsi->timings.hbp = 1;
@@ -4667,6 +4662,20 @@ void omapdss_dsi_set_timings(struct omap_dss_device *dssdev,
 }
 EXPORT_SYMBOL(omapdss_dsi_set_timings);
 
+void omapdss_dsi_set_size(struct omap_dss_device *dssdev, u16 w, u16 h)
+{
+	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+
+	mutex_lock(&dsi->lock);
+
+	dsi->timings.x_res = w;
+	dsi->timings.y_res = h;
+
+	mutex_unlock(&dsi->lock);
+}
+EXPORT_SYMBOL(omapdss_dsi_set_size);
+
 static int __init dsi_init_display(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
-- 
cgit v1.2.1


From 55cd63acf6855cd45a183fdfca6d22450b8d1d47 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Thu, 9 Aug 2012 15:41:13 +0530
Subject: OMAPDSS: DSI: Update manager timings on a manual update

During a command mode update using DISPC video port, we may need to swap the
connected overlay manager's width and height when 90 or 270 degree rotation is
done via the panel by changing it's address mode.

Call dss_mgr_set_timings() in update_screen_dispc() before starting the manager
update. The new manager size is updated in the 'timings' field of DSI driver's
private data via omapdss_dsi_set_size(). A panel driver is expected to call this
when performing rotation.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dsi.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index da68a2f93104..36e2aa79bca6 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4178,8 +4178,7 @@ void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel)
 }
 EXPORT_SYMBOL(dsi_disable_video_output);
 
-static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
-		u16 w, u16 h)
+static void dsi_update_screen_dispc(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
@@ -4193,6 +4192,8 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
 	int r;
 	const unsigned channel = dsi->update_channel;
 	const unsigned line_buf_size = dsi_get_line_buf_size(dsidev);
+	u16 w = dsi->timings.x_res;
+	u16 h = dsi->timings.y_res;
 
 	DSSDBG("dsi_update_screen_dispc(%dx%d)\n", w, h);
 
@@ -4242,6 +4243,8 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
 		msecs_to_jiffies(250));
 	BUG_ON(r == 0);
 
+	dss_mgr_set_timings(dssdev->manager, &dsi->timings);
+
 	dss_mgr_start_update(dssdev->manager);
 
 	if (dsi->te_enabled) {
@@ -4335,7 +4338,7 @@ int omap_dsi_update(struct omap_dss_device *dssdev, int channel,
 	dsi->update_bytes = dw * dh *
 		dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt) / 8;
 #endif
-	dsi_update_screen_dispc(dssdev, dw, dh);
+	dsi_update_screen_dispc(dssdev);
 
 	return 0;
 }
-- 
cgit v1.2.1


From 7849398fa28c21dad24292b838b059a862f99f16 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Wed, 8 Aug 2012 16:50:42 +0530
Subject: OMAPDSS: HDMI: Use our own omap_video_timings field when setting
 interface timings

The hdmi driver currently updates only the 'code' member of hdmi_config when
the op omapdss_hdmi_display_set_timing() is called by the hdmi panel driver.
The 'timing' field of hdmi_config is updated only when hdmi_power_on is called.
It makes more sense to configure the whole hdmi_config field in the set_timing
op called by the panel driver. This way, we don't need to call both functions
to ensure that our hdmi_config is configured correctly. Also, we don't need to
calculate hdmi_config during hdmi_power_on, or rely on the omap_video_timings
in the panel's omap_dss_device struct.

The default timings of the hdmi panel are represented in a cleaner form. Since
the hdmi output is now configured by it's own copy of timings (in
hdmi.ip_data.cfg), the panel driver needs to set it to a valid value before
enabling hdmi output. We now call omapdss_hdmi_set_timing() before enabling
hdmi output, this is done to atleast have the hdmi output configured to the
panel's default timings if the DSS user didn't call panel driver's set_timings()
op explicitly.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dss.h        |  3 ++-
 drivers/video/omap2/dss/hdmi.c       | 35 ++++++++++++++---------------------
 drivers/video/omap2/dss/hdmi_panel.c | 29 +++++++++++++++++++++++------
 3 files changed, 39 insertions(+), 28 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 3682e3f78426..ea39a994d1fd 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -484,7 +484,8 @@ static inline unsigned long hdmi_get_pixel_clock(void)
 #endif
 int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev);
 void omapdss_hdmi_display_disable(struct omap_dss_device *dssdev);
-void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev);
+void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings);
 int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev,
 					struct omap_video_timings *timings);
 int omapdss_hdmi_read_edid(u8 *buf, int len);
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index a65dafaa0d72..964a19500c0e 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -459,7 +459,6 @@ static void hdmi_compute_pll(struct omap_dss_device *dssdev, int phy,
 static int hdmi_power_on(struct omap_dss_device *dssdev)
 {
 	int r;
-	const struct hdmi_config *timing;
 	struct omap_video_timings *p;
 	unsigned long phy;
 
@@ -469,22 +468,10 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 
 	dss_mgr_disable(dssdev->manager);
 
-	p = &dssdev->panel.timings;
+	p = &hdmi.ip_data.cfg.timings;
 
-	DSSDBG("hdmi_power_on x_res= %d y_res = %d\n",
-		dssdev->panel.timings.x_res,
-		dssdev->panel.timings.y_res);
+	DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
 
-	timing = hdmi_get_timings();
-	if (timing == NULL) {
-		/* HDMI code 4 corresponds to 640 * 480 VGA */
-		hdmi.ip_data.cfg.cm.code = 4;
-		/* DVI mode 1 corresponds to HDMI 0 to DVI */
-		hdmi.ip_data.cfg.cm.mode = HDMI_DVI;
-		hdmi.ip_data.cfg = vesa_timings[0];
-	} else {
-		hdmi.ip_data.cfg = *timing;
-	}
 	phy = p->pixel_clock;
 
 	hdmi_compute_pll(dssdev, phy, &hdmi.ip_data.pll_data);
@@ -521,7 +508,7 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 	dispc_enable_gamma_table(0);
 
 	/* tv size */
-	dss_mgr_set_timings(dssdev->manager, &dssdev->panel.timings);
+	dss_mgr_set_timings(dssdev->manager, p);
 
 	r = hdmi.ip_data.ops->video_enable(&hdmi.ip_data);
 	if (r)
@@ -568,13 +555,18 @@ int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev,
 
 }
 
-void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev)
+void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
 {
 	struct hdmi_cm cm;
+	const struct hdmi_config *t;
 
-	cm = hdmi_get_code(&dssdev->panel.timings);
-	hdmi.ip_data.cfg.cm.code = cm.code;
-	hdmi.ip_data.cfg.cm.mode = cm.mode;
+	cm = hdmi_get_code(timings);
+	hdmi.ip_data.cfg.cm = cm;
+
+	t = hdmi_get_timings();
+	if (t != NULL)
+		hdmi.ip_data.cfg = *t;
 
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
 		int r;
@@ -585,7 +577,7 @@ void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev)
 		if (r)
 			DSSERR("failed to power on device\n");
 	} else {
-		dss_mgr_set_timings(dssdev->manager, &dssdev->panel.timings);
+		dss_mgr_set_timings(dssdev->manager, &t->timings);
 	}
 }
 
@@ -930,6 +922,7 @@ static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
 	hdmi.ip_data.core_av_offset = HDMI_CORE_AV;
 	hdmi.ip_data.pll_offset = HDMI_PLLCTRL;
 	hdmi.ip_data.phy_offset = HDMI_PHY;
+
 	mutex_init(&hdmi.ip_data.lock);
 
 	hdmi_panel_init();
diff --git a/drivers/video/omap2/dss/hdmi_panel.c b/drivers/video/omap2/dss/hdmi_panel.c
index e10844faadf9..2feb2cdfb60f 100644
--- a/drivers/video/omap2/dss/hdmi_panel.c
+++ b/drivers/video/omap2/dss/hdmi_panel.c
@@ -41,17 +41,32 @@ static struct {
 
 static int hdmi_panel_probe(struct omap_dss_device *dssdev)
 {
+	/* Initialize default timings to VGA in DVI mode */
+	const struct omap_video_timings default_timings = {
+		.x_res		= 640,
+		.y_res		= 480,
+		.pixel_clock	= 25175,
+		.hsw		= 96,
+		.hfp		= 16,
+		.hbp		= 48,
+		.vsw		= 2,
+		.vfp		= 11,
+		.vbp		= 31,
+
+		.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+		.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+
+		.interlace	= false,
+	};
+
 	DSSDBG("ENTER hdmi_panel_probe\n");
 
-	dssdev->panel.timings = (struct omap_video_timings)
-			{ 640, 480, 25175, 96, 16, 48, 2, 11, 31,
-				OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
-				false,
-			};
+	dssdev->panel.timings = default_timings;
 
 	DSSDBG("hdmi_panel_probe x_res= %d y_res = %d\n",
 		dssdev->panel.timings.x_res,
 		dssdev->panel.timings.y_res);
+
 	return 0;
 }
 
@@ -228,6 +243,8 @@ static int hdmi_panel_enable(struct omap_dss_device *dssdev)
 		goto err;
 	}
 
+	omapdss_hdmi_display_set_timing(dssdev, &dssdev->panel.timings);
+
 	r = omapdss_hdmi_display_enable(dssdev);
 	if (r) {
 		DSSERR("failed to power on\n");
@@ -336,8 +353,8 @@ static void hdmi_set_timings(struct omap_dss_device *dssdev,
 	 */
 	hdmi_panel_audio_disable(dssdev);
 
+	omapdss_hdmi_display_set_timing(dssdev, timings);
 	dssdev->panel.timings = *timings;
-	omapdss_hdmi_display_set_timing(dssdev);
 
 	mutex_unlock(&hdmi.lock);
 }
-- 
cgit v1.2.1


From ed1aa9003bc359a3139cbd6c31eb834fa71b26d9 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Wed, 15 Aug 2012 00:40:31 +0530
Subject: OMAPDSS: HDMI: Add locking for hdmi interface set timing functions

The hdmi interface driver exposes functions to the hdmi panel driver to
configure the interface timings maintained by the hdmi driver.

These timings(stored in hdmi.ip_data.cfg) should be protected by the hdmi lock
to ensure they are called sequentially, this is similar to how hdmi enable and
disable functions need locking.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/hdmi.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 964a19500c0e..0cdf24673d48 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -561,6 +561,8 @@ void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev,
 	struct hdmi_cm cm;
 	const struct hdmi_config *t;
 
+	mutex_lock(&hdmi.lock);
+
 	cm = hdmi_get_code(timings);
 	hdmi.ip_data.cfg.cm = cm;
 
@@ -579,6 +581,8 @@ void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev,
 	} else {
 		dss_mgr_set_timings(dssdev->manager, &t->timings);
 	}
+
+	mutex_unlock(&hdmi.lock);
 }
 
 static void hdmi_dump_regs(struct seq_file *s)
-- 
cgit v1.2.1


From c7833f7bc049dfd844ce3042798cf48551b5f14d Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Thu, 5 Jul 2012 17:11:12 +0530
Subject: OMAPDSS: SDI: Create a function to set timings

Create function omapdss_sdi_set_timings(). Configuring new timings is done the
same way as before, SDI is disabled, and re-enabled with the new timings in
dssdev. This just moves the code from the panel drivers to the SDI driver.

The panel drivers shouldn't be aware of how SDI manages to configure a new set
of timings. This should be taken care of by the SDI driver itself.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/displays/panel-acx565akm.c | 13 +------------
 drivers/video/omap2/dss/sdi.c                  | 17 +++++++++++++++++
 2 files changed, 18 insertions(+), 12 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-acx565akm.c b/drivers/video/omap2/displays/panel-acx565akm.c
index eaeed4340e04..11bdc883e46b 100644
--- a/drivers/video/omap2/displays/panel-acx565akm.c
+++ b/drivers/video/omap2/displays/panel-acx565akm.c
@@ -731,18 +731,7 @@ static int acx_panel_resume(struct omap_dss_device *dssdev)
 static void acx_panel_set_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
-	int r;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
-		omapdss_sdi_display_disable(dssdev);
-
-	dssdev->panel.timings = *timings;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
-		r = omapdss_sdi_display_enable(dssdev);
-		if (r)
-			dev_err(&dssdev->dev, "%s enable failed\n", __func__);
-	}
+	omapdss_sdi_set_timings(dssdev, timings);
 }
 
 static int acx_panel_check_timings(struct omap_dss_device *dssdev,
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 5d31699fbd3c..0474962571c6 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -146,6 +146,23 @@ void omapdss_sdi_display_disable(struct omap_dss_device *dssdev)
 }
 EXPORT_SYMBOL(omapdss_sdi_display_disable);
 
+void omapdss_sdi_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	int r;
+
+	dssdev->panel.timings = *timings;
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
+		omapdss_sdi_display_disable(dssdev);
+
+		r = omapdss_sdi_display_enable(dssdev);
+		if (r)
+			DSSERR("failed to set new timings\n");
+	}
+}
+EXPORT_SYMBOL(omapdss_sdi_set_timings);
+
 static int __init sdi_init_display(struct omap_dss_device *dssdev)
 {
 	DSSDBG("SDI init\n");
-- 
cgit v1.2.1


From 9b4a5716ef54bbf2f57c75f790b12fc63a4be640 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Wed, 8 Aug 2012 16:56:06 +0530
Subject: OMAPDSS: SDI: Maintain our own timings field in driver data

The SDI driver currently relies on the timings in omap_dss_device struct to
configure the DISPC accordingly. This makes the SDI interface driver dependent
on the omap_dss_device struct.

Make the SDI driver data maintain it's own timings field. The panel driver is
expected to call omapdss_sdi_set_timings() to set these timings before the panel
is enabled.

Make the SDI panel driver configure the new timings is the omap_dss_device
struct(dssdev->panel.timings). The SDI driver is responsible for maintaining
only it's own copy of timings.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/displays/panel-acx565akm.c | 4 ++++
 drivers/video/omap2/dss/sdi.c                  | 9 +++++----
 2 files changed, 9 insertions(+), 4 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-acx565akm.c b/drivers/video/omap2/displays/panel-acx565akm.c
index 11bdc883e46b..77fe59f6a8cd 100644
--- a/drivers/video/omap2/displays/panel-acx565akm.c
+++ b/drivers/video/omap2/displays/panel-acx565akm.c
@@ -600,6 +600,8 @@ static int acx_panel_power_on(struct omap_dss_device *dssdev)
 
 	mutex_lock(&md->mutex);
 
+	omapdss_sdi_set_timings(dssdev, &dssdev->panel.timings);
+
 	r = omapdss_sdi_display_enable(dssdev);
 	if (r) {
 		pr_err("%s sdi enable failed\n", __func__);
@@ -732,6 +734,8 @@ static void acx_panel_set_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
 	omapdss_sdi_set_timings(dssdev, timings);
+
+	dssdev->panel.timings = *timings;
 }
 
 static int acx_panel_check_timings(struct omap_dss_device *dssdev,
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 0474962571c6..6ec6614009ed 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -34,6 +34,7 @@ static struct {
 	struct regulator *vdds_sdi_reg;
 
 	struct dss_lcd_mgr_config mgr_config;
+	struct omap_video_timings timings;
 } sdi;
 
 static void sdi_config_lcd_manager(struct omap_dss_device *dssdev)
@@ -51,7 +52,7 @@ static void sdi_config_lcd_manager(struct omap_dss_device *dssdev)
 
 int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 {
-	struct omap_video_timings *t = &dssdev->panel.timings;
+	struct omap_video_timings *t = &sdi.timings;
 	struct dss_clock_info dss_cinfo;
 	struct dispc_clock_info dispc_cinfo;
 	unsigned long pck;
@@ -77,8 +78,8 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 		goto err_get_dispc;
 
 	/* 15.5.9.1.2 */
-	dssdev->panel.timings.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
-	dssdev->panel.timings.sync_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
+	t->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
+	t->sync_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
 
 	r = dss_calc_clock_div(t->pixel_clock * 1000, &dss_cinfo, &dispc_cinfo);
 	if (r)
@@ -151,7 +152,7 @@ void omapdss_sdi_set_timings(struct omap_dss_device *dssdev,
 {
 	int r;
 
-	dssdev->panel.timings = *timings;
+	sdi.timings = *timings;
 
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
 		omapdss_sdi_display_disable(dssdev);
-- 
cgit v1.2.1


From 156fd99e92c30b0a894f7f4874c6901bfdc65c44 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 6 Jul 2012 20:52:37 +0530
Subject: OMAPDSS: VENC: Split VENC into interface and panel driver

The current venc.c driver contains both the interface and panel driver code.
This makes the driver hard to read, and difficult to understand the work split
between the interface and panel driver and the how the locking works.

This also makes it easier to clearly define the VENC interface ops called by the
panel driver.

Split venc.c into venc.c and venc_panel.c representing the interface and panel
driver respectively. This split is done along the lines of the HDMI interface
and panel drivers.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/Makefile     |   2 +-
 drivers/video/omap2/dss/dss.h        |  10 ++
 drivers/video/omap2/dss/venc.c       | 208 ++++++++---------------------
 drivers/video/omap2/dss/venc_panel.c | 244 +++++++++++++++++++++++++++++++++++
 4 files changed, 308 insertions(+), 156 deletions(-)
 create mode 100644 drivers/video/omap2/dss/venc_panel.c

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile
index 5c450b0f94d0..30a48fba75b0 100644
--- a/drivers/video/omap2/dss/Makefile
+++ b/drivers/video/omap2/dss/Makefile
@@ -3,7 +3,7 @@ omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
 	manager.o overlay.o apply.o
 omapdss-$(CONFIG_OMAP2_DSS_DPI) += dpi.o
 omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o
-omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o
+omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o venc_panel.o
 omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o
 omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o
 omapdss-$(CONFIG_OMAP4_DSS_HDMI) += hdmi.o \
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index ea39a994d1fd..78493dbd38eb 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -469,6 +469,16 @@ static inline unsigned long venc_get_pixel_clock(void)
 	return 0;
 }
 #endif
+int omapdss_venc_display_enable(struct omap_dss_device *dssdev);
+void omapdss_venc_display_disable(struct omap_dss_device *dssdev);
+void omapdss_venc_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings);
+int omapdss_venc_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings);
+u32 omapdss_venc_get_wss(struct omap_dss_device *dssdev);
+int omapdss_venc_set_wss(struct omap_dss_device *dssdev, u32 wss);
+int venc_panel_init(void);
+void venc_panel_exit(void);
 
 /* HDMI */
 #ifdef CONFIG_OMAP4_DSS_HDMI
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 3a220877461a..ffca542a2242 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -427,6 +427,10 @@ static int venc_power_on(struct omap_dss_device *dssdev)
 	u32 l;
 	int r;
 
+	r = venc_runtime_get();
+	if (r)
+		goto err0;
+
 	venc_reset();
 	venc_write_config(venc_timings_to_config(&dssdev->panel.timings));
 
@@ -449,26 +453,22 @@ static int venc_power_on(struct omap_dss_device *dssdev)
 
 	r = regulator_enable(venc.vdda_dac_reg);
 	if (r)
-		goto err;
-
-	if (dssdev->platform_enable)
-		dssdev->platform_enable(dssdev);
+		goto err1;
 
 	r = dss_mgr_enable(dssdev->manager);
 	if (r)
-		goto err;
+		goto err2;
 
 	return 0;
 
-err:
+err2:
+	regulator_disable(venc.vdda_dac_reg);
+err1:
 	venc_write_reg(VENC_OUTPUT_CONTROL, 0);
 	dss_set_dac_pwrdn_bgz(0);
 
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
-
-	regulator_disable(venc.vdda_dac_reg);
-
+	venc_runtime_put();
+err0:
 	return r;
 }
 
@@ -479,10 +479,9 @@ static void venc_power_off(struct omap_dss_device *dssdev)
 
 	dss_mgr_disable(dssdev->manager);
 
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
-
 	regulator_disable(venc.vdda_dac_reg);
+
+	venc_runtime_put();
 }
 
 unsigned long venc_get_pixel_clock(void)
@@ -491,171 +490,95 @@ unsigned long venc_get_pixel_clock(void)
 	return 13500000;
 }
 
-static ssize_t display_output_type_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
+int omapdss_venc_display_enable(struct omap_dss_device *dssdev)
 {
-	struct omap_dss_device *dssdev = to_dss_device(dev);
-	const char *ret;
-
-	switch (dssdev->phy.venc.type) {
-	case OMAP_DSS_VENC_TYPE_COMPOSITE:
-		ret = "composite";
-		break;
-	case OMAP_DSS_VENC_TYPE_SVIDEO:
-		ret = "svideo";
-		break;
-	default:
-		return -EINVAL;
-	}
+	int r;
 
-	return snprintf(buf, PAGE_SIZE, "%s\n", ret);
-}
-
-static ssize_t display_output_type_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t size)
-{
-	struct omap_dss_device *dssdev = to_dss_device(dev);
-	enum omap_dss_venc_type new_type;
-
-	if (sysfs_streq("composite", buf))
-		new_type = OMAP_DSS_VENC_TYPE_COMPOSITE;
-	else if (sysfs_streq("svideo", buf))
-		new_type = OMAP_DSS_VENC_TYPE_SVIDEO;
-	else
-		return -EINVAL;
+	DSSDBG("venc_display_enable\n");
 
 	mutex_lock(&venc.venc_lock);
 
-	if (dssdev->phy.venc.type != new_type) {
-		dssdev->phy.venc.type = new_type;
-		if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
-			venc_power_off(dssdev);
-			venc_power_on(dssdev);
-		}
+	if (dssdev->manager == NULL) {
+		DSSERR("Failed to enable display: no manager\n");
+		r = -ENODEV;
+		goto err0;
 	}
 
-	mutex_unlock(&venc.venc_lock);
-
-	return size;
-}
-
-static DEVICE_ATTR(output_type, S_IRUGO | S_IWUSR,
-		display_output_type_show, display_output_type_store);
-
-/* driver */
-static int venc_panel_probe(struct omap_dss_device *dssdev)
-{
-	dssdev->panel.timings = omap_dss_pal_timings;
-
-	return device_create_file(&dssdev->dev, &dev_attr_output_type);
-}
-
-static void venc_panel_remove(struct omap_dss_device *dssdev)
-{
-	device_remove_file(&dssdev->dev, &dev_attr_output_type);
-}
-
-static int venc_panel_enable(struct omap_dss_device *dssdev)
-{
-	int r = 0;
-
-	DSSDBG("venc_enable_display\n");
-
-	mutex_lock(&venc.venc_lock);
-
 	r = omap_dss_start_device(dssdev);
 	if (r) {
 		DSSERR("failed to start device\n");
 		goto err0;
 	}
 
-	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
-		r = -EINVAL;
-		goto err1;
-	}
+	if (dssdev->platform_enable)
+		dssdev->platform_enable(dssdev);
 
-	r = venc_runtime_get();
-	if (r)
-		goto err1;
 
 	r = venc_power_on(dssdev);
 	if (r)
-		goto err2;
+		goto err1;
 
 	venc.wss_data = 0;
 
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
 	mutex_unlock(&venc.venc_lock);
+
 	return 0;
-err2:
-	venc_runtime_put();
 err1:
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
 	omap_dss_stop_device(dssdev);
 err0:
 	mutex_unlock(&venc.venc_lock);
-
 	return r;
 }
 
-static void venc_panel_disable(struct omap_dss_device *dssdev)
+void omapdss_venc_display_disable(struct omap_dss_device *dssdev)
 {
-	DSSDBG("venc_disable_display\n");
+	DSSDBG("venc_display_disable\n");
 
 	mutex_lock(&venc.venc_lock);
 
-	if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED)
-		goto end;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) {
-		/* suspended is the same as disabled with venc */
-		dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-		goto end;
-	}
-
 	venc_power_off(dssdev);
 
-	venc_runtime_put();
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-
 	omap_dss_stop_device(dssdev);
-end:
-	mutex_unlock(&venc.venc_lock);
-}
 
-static int venc_panel_suspend(struct omap_dss_device *dssdev)
-{
-	venc_panel_disable(dssdev);
-	return 0;
-}
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
 
-static int venc_panel_resume(struct omap_dss_device *dssdev)
-{
-	return venc_panel_enable(dssdev);
+	mutex_unlock(&venc.venc_lock);
 }
 
-static void venc_set_timings(struct omap_dss_device *dssdev,
-			struct omap_video_timings *timings)
+void omapdss_venc_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
 {
 	DSSDBG("venc_set_timings\n");
 
+	mutex_lock(&venc.venc_lock);
+
 	/* Reset WSS data when the TV standard changes. */
 	if (memcmp(&dssdev->panel.timings, timings, sizeof(*timings)))
 		venc.wss_data = 0;
 
 	dssdev->panel.timings = *timings;
+
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
+		int r;
+
 		/* turn the venc off and on to get new timings to use */
-		venc_panel_disable(dssdev);
-		venc_panel_enable(dssdev);
+		venc_power_off(dssdev);
+
+		r = venc_power_on(dssdev);
+		if (r)
+			DSSERR("failed to power on VENC\n");
 	} else {
 		dss_mgr_set_timings(dssdev->manager, timings);
 	}
+
+	mutex_unlock(&venc.venc_lock);
 }
 
-static int venc_check_timings(struct omap_dss_device *dssdev,
-			struct omap_video_timings *timings)
+int omapdss_venc_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
 {
 	DSSDBG("venc_check_timings\n");
 
@@ -668,13 +591,13 @@ static int venc_check_timings(struct omap_dss_device *dssdev,
 	return -EINVAL;
 }
 
-static u32 venc_get_wss(struct omap_dss_device *dssdev)
+u32 omapdss_venc_get_wss(struct omap_dss_device *dssdev)
 {
 	/* Invert due to VENC_L21_WC_CTL:INV=1 */
 	return (venc.wss_data >> 8) ^ 0xfffff;
 }
 
-static int venc_set_wss(struct omap_dss_device *dssdev,	u32 wss)
+int omapdss_venc_set_wss(struct omap_dss_device *dssdev, u32 wss)
 {
 	const struct venc_config *config;
 	int r;
@@ -703,31 +626,6 @@ err:
 	return r;
 }
 
-static struct omap_dss_driver venc_driver = {
-	.probe		= venc_panel_probe,
-	.remove		= venc_panel_remove,
-
-	.enable		= venc_panel_enable,
-	.disable	= venc_panel_disable,
-	.suspend	= venc_panel_suspend,
-	.resume		= venc_panel_resume,
-
-	.get_resolution	= omapdss_default_get_resolution,
-	.get_recommended_bpp = omapdss_default_get_recommended_bpp,
-
-	.set_timings	= venc_set_timings,
-	.check_timings	= venc_check_timings,
-
-	.get_wss	= venc_get_wss,
-	.set_wss	= venc_set_wss,
-
-	.driver         = {
-		.name   = "venc",
-		.owner  = THIS_MODULE,
-	},
-};
-/* driver end */
-
 static int __init venc_init_display(struct omap_dss_device *dssdev)
 {
 	DSSDBG("init_display\n");
@@ -897,9 +795,9 @@ static int __init omap_venchw_probe(struct platform_device *pdev)
 
 	venc_runtime_put();
 
-	r = omap_dss_register_driver(&venc_driver);
+	r = venc_panel_init();
 	if (r)
-		goto err_reg_panel_driver;
+		goto err_panel_init;
 
 	dss_debugfs_create_file("venc", venc_dump_regs);
 
@@ -907,7 +805,7 @@ static int __init omap_venchw_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_reg_panel_driver:
+err_panel_init:
 err_runtime_get:
 	pm_runtime_disable(&pdev->dev);
 	venc_put_clocks();
@@ -923,7 +821,7 @@ static int __exit omap_venchw_remove(struct platform_device *pdev)
 		venc.vdda_dac_reg = NULL;
 	}
 
-	omap_dss_unregister_driver(&venc_driver);
+	venc_panel_exit();
 
 	pm_runtime_disable(&pdev->dev);
 	venc_put_clocks();
diff --git a/drivers/video/omap2/dss/venc_panel.c b/drivers/video/omap2/dss/venc_panel.c
new file mode 100644
index 000000000000..cfed9077d2fb
--- /dev/null
+++ b/drivers/video/omap2/dss/venc_panel.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * VENC panel driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+
+#include <video/omapdss.h>
+
+#include "dss.h"
+
+static struct {
+	struct mutex lock;
+} venc_panel;
+
+static ssize_t display_output_type_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	const char *ret;
+
+	switch (dssdev->phy.venc.type) {
+	case OMAP_DSS_VENC_TYPE_COMPOSITE:
+		ret = "composite";
+		break;
+	case OMAP_DSS_VENC_TYPE_SVIDEO:
+		ret = "svideo";
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", ret);
+}
+
+static ssize_t display_output_type_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	enum omap_dss_venc_type new_type;
+
+	if (sysfs_streq("composite", buf))
+		new_type = OMAP_DSS_VENC_TYPE_COMPOSITE;
+	else if (sysfs_streq("svideo", buf))
+		new_type = OMAP_DSS_VENC_TYPE_SVIDEO;
+	else
+		return -EINVAL;
+
+	mutex_lock(&venc_panel.lock);
+
+	if (dssdev->phy.venc.type != new_type) {
+		dssdev->phy.venc.type = new_type;
+		if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
+			omapdss_venc_display_disable(dssdev);
+			omapdss_venc_display_enable(dssdev);
+		}
+	}
+
+	mutex_unlock(&venc_panel.lock);
+
+	return size;
+}
+
+static DEVICE_ATTR(output_type, S_IRUGO | S_IWUSR,
+		display_output_type_show, display_output_type_store);
+
+static int venc_panel_probe(struct omap_dss_device *dssdev)
+{
+	/* set default timings to PAL */
+	const struct omap_video_timings default_timings = {
+		.x_res		= 720,
+		.y_res		= 574,
+		.pixel_clock	= 13500,
+		.hsw		= 64,
+		.hfp		= 12,
+		.hbp		= 68,
+		.vsw		= 5,
+		.vfp		= 5,
+		.vbp		= 41,
+
+		.vsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+		.hsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+
+		.interlace	= true,
+	};
+
+	mutex_init(&venc_panel.lock);
+
+	dssdev->panel.timings = default_timings;
+
+	return device_create_file(&dssdev->dev, &dev_attr_output_type);
+}
+
+static void venc_panel_remove(struct omap_dss_device *dssdev)
+{
+	device_remove_file(&dssdev->dev, &dev_attr_output_type);
+}
+
+static int venc_panel_enable(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	dev_dbg(&dssdev->dev, "venc_panel_enable\n");
+
+	mutex_lock(&venc_panel.lock);
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
+		r = -EINVAL;
+		goto err;
+	}
+
+	r = omapdss_venc_display_enable(dssdev);
+	if (r)
+		goto err;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	mutex_unlock(&venc_panel.lock);
+
+	return 0;
+err:
+	mutex_unlock(&venc_panel.lock);
+
+	return r;
+}
+
+static void venc_panel_disable(struct omap_dss_device *dssdev)
+{
+	dev_dbg(&dssdev->dev, "venc_panel_disable\n");
+
+	mutex_lock(&venc_panel.lock);
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED)
+		goto end;
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) {
+		/* suspended is the same as disabled with venc */
+		dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+		goto end;
+	}
+
+	omapdss_venc_display_disable(dssdev);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+end:
+	mutex_unlock(&venc_panel.lock);
+}
+
+static int venc_panel_suspend(struct omap_dss_device *dssdev)
+{
+	venc_panel_disable(dssdev);
+	return 0;
+}
+
+static int venc_panel_resume(struct omap_dss_device *dssdev)
+{
+	return venc_panel_enable(dssdev);
+}
+
+static void venc_panel_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	dev_dbg(&dssdev->dev, "venc_panel_set_timings\n");
+
+	mutex_lock(&venc_panel.lock);
+
+	omapdss_venc_set_timings(dssdev, timings);
+
+	mutex_unlock(&venc_panel.lock);
+}
+
+static int venc_panel_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	dev_dbg(&dssdev->dev, "venc_panel_check_timings\n");
+
+	return omapdss_venc_check_timings(dssdev, timings);
+}
+
+static u32 venc_panel_get_wss(struct omap_dss_device *dssdev)
+{
+	dev_dbg(&dssdev->dev, "venc_panel_get_wss\n");
+
+	return omapdss_venc_get_wss(dssdev);
+}
+
+static int venc_panel_set_wss(struct omap_dss_device *dssdev, u32 wss)
+{
+	dev_dbg(&dssdev->dev, "venc_panel_set_wss\n");
+
+	return omapdss_venc_set_wss(dssdev, wss);
+}
+
+static struct omap_dss_driver venc_driver = {
+	.probe		= venc_panel_probe,
+	.remove		= venc_panel_remove,
+
+	.enable		= venc_panel_enable,
+	.disable	= venc_panel_disable,
+	.suspend	= venc_panel_suspend,
+	.resume		= venc_panel_resume,
+
+	.get_resolution	= omapdss_default_get_resolution,
+	.get_recommended_bpp = omapdss_default_get_recommended_bpp,
+
+	.set_timings	= venc_panel_set_timings,
+	.check_timings	= venc_panel_check_timings,
+
+	.get_wss	= venc_panel_get_wss,
+	.set_wss	= venc_panel_set_wss,
+
+	.driver         = {
+		.name   = "venc",
+		.owner  = THIS_MODULE,
+	},
+};
+
+int venc_panel_init(void)
+{
+	return omap_dss_register_driver(&venc_driver);
+}
+
+void venc_panel_exit(void)
+{
+	omap_dss_unregister_driver(&venc_driver);
+}
-- 
cgit v1.2.1


From a5abf4721b5d27357d6a9623bde02ad44cffd40f Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 20 Jul 2012 16:15:44 +0530
Subject: OMAPDSS: VENC: Maintain our own timings field in driver data

The VENC driver currently relies on the timings in omap_dss_device struct to
configure the DISPC and VENC blocks accordingly. This makes the VENC interface
driver dependent on the omap_dss_device struct.

Make the VENC driver data maintain it's own timings field. The panel driver is
expected to call omapdss_venc_set_timings() to set these timings before the
panel is enabled. Call omapdss_venc_set_timings() before enabling
venc output, this is done to atleast have the venc output configured to the
panel's default timings if the DSS user didn't explicitly call the venc panel
driver's set_timings op.

Make the VENC panel driver configure the new timings is the omap_dss_device
struct(dssdev->panel.timings). The VENC driver is responsible for maintaining
only it's own copy of timings.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/venc.c       | 12 +++++++-----
 drivers/video/omap2/dss/venc_panel.c |  3 +++
 2 files changed, 10 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index ffca542a2242..d96025e2ca7a 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -300,6 +300,8 @@ static struct {
 	struct regulator *vdda_dac_reg;
 
 	struct clk	*tv_dac_clk;
+
+	struct omap_video_timings timings;
 } venc;
 
 static inline void venc_write_reg(int idx, u32 val)
@@ -432,7 +434,7 @@ static int venc_power_on(struct omap_dss_device *dssdev)
 		goto err0;
 
 	venc_reset();
-	venc_write_config(venc_timings_to_config(&dssdev->panel.timings));
+	venc_write_config(venc_timings_to_config(&venc.timings));
 
 	dss_set_venc_output(dssdev->phy.venc.type);
 	dss_set_dac_pwrdn_bgz(1);
@@ -449,7 +451,7 @@ static int venc_power_on(struct omap_dss_device *dssdev)
 
 	venc_write_reg(VENC_OUTPUT_CONTROL, l);
 
-	dss_mgr_set_timings(dssdev->manager, &dssdev->panel.timings);
+	dss_mgr_set_timings(dssdev->manager, &venc.timings);
 
 	r = regulator_enable(venc.vdda_dac_reg);
 	if (r)
@@ -556,10 +558,10 @@ void omapdss_venc_set_timings(struct omap_dss_device *dssdev,
 	mutex_lock(&venc.venc_lock);
 
 	/* Reset WSS data when the TV standard changes. */
-	if (memcmp(&dssdev->panel.timings, timings, sizeof(*timings)))
+	if (memcmp(&venc.timings, timings, sizeof(*timings)))
 		venc.wss_data = 0;
 
-	dssdev->panel.timings = *timings;
+	venc.timings = *timings;
 
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
 		int r;
@@ -606,7 +608,7 @@ int omapdss_venc_set_wss(struct omap_dss_device *dssdev, u32 wss)
 
 	mutex_lock(&venc.venc_lock);
 
-	config = venc_timings_to_config(&dssdev->panel.timings);
+	config = venc_timings_to_config(&venc.timings);
 
 	/* Invert due to VENC_L21_WC_CTL:INV=1 */
 	venc.wss_data = (wss ^ 0xfffff) << 8;
diff --git a/drivers/video/omap2/dss/venc_panel.c b/drivers/video/omap2/dss/venc_panel.c
index cfed9077d2fb..80963697d384 100644
--- a/drivers/video/omap2/dss/venc_panel.c
+++ b/drivers/video/omap2/dss/venc_panel.c
@@ -127,6 +127,8 @@ static int venc_panel_enable(struct omap_dss_device *dssdev)
 		goto err;
 	}
 
+	omapdss_venc_set_timings(dssdev, &dssdev->panel.timings);
+
 	r = omapdss_venc_display_enable(dssdev);
 	if (r)
 		goto err;
@@ -183,6 +185,7 @@ static void venc_panel_set_timings(struct omap_dss_device *dssdev,
 	mutex_lock(&venc_panel.lock);
 
 	omapdss_venc_set_timings(dssdev, timings);
+	dssdev->panel.timings = *timings;
 
 	mutex_unlock(&venc_panel.lock);
 }
-- 
cgit v1.2.1


From 43eab86167a0893e0e1102d4a5a1d95dfe442f8d Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 13 Aug 2012 12:24:53 +0530
Subject: OMAPDSS: RFBI: Remove partial update support

Partial update suppport was removed from DISPC and DSI sometime back. The RFBI
driver still tries to support partial update without the underlying support in
DISPC.

Remove partial update support from RFBI, only support updates which span acros
the whole panel size. This also helps in DSI and RFBI having similar update
ops.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/displays/panel-n8x0.c | 14 ++++--
 drivers/video/omap2/dss/rfbi.c            | 76 ++++++++-----------------------
 2 files changed, 29 insertions(+), 61 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-n8x0.c b/drivers/video/omap2/displays/panel-n8x0.c
index e6c115373c00..1d421b5ffae4 100644
--- a/drivers/video/omap2/displays/panel-n8x0.c
+++ b/drivers/video/omap2/displays/panel-n8x0.c
@@ -625,17 +625,25 @@ static int n8x0_panel_update(struct omap_dss_device *dssdev,
 		u16 x, u16 y, u16 w, u16 h)
 {
 	struct panel_drv_data *ddata = get_drv_data(dssdev);
+	u16 dw, dh;
 
 	dev_dbg(&dssdev->dev, "update\n");
 
+	dw = dssdev->panel.timings.x_res;
+	dh = dssdev->panel.timings.y_res;
+
+	if (x != 0 || y != 0 || w != dw || h != dh) {
+		dev_err(&dssdev->dev, "invaid update region %d, %d, %d, %d\n",
+			x, y, w, h);
+		return -EINVAL;
+	}
+
 	mutex_lock(&ddata->lock);
 	rfbi_bus_lock();
 
-	omap_rfbi_prepare_update(dssdev, &x, &y, &w, &h);
-
 	blizzard_ctrl_setup_update(dssdev, x, y, w, h);
 
-	omap_rfbi_update(dssdev, x, y, w, h, update_done, NULL);
+	omap_rfbi_update(dssdev, update_done, NULL);
 
 	mutex_unlock(&ddata->lock);
 
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 7c087424b634..6bc264818edf 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -300,21 +300,24 @@ void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
 }
 EXPORT_SYMBOL(omap_rfbi_write_pixels);
 
-static int rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
-		u16 height, void (*callback)(void *data), void *data)
+static int rfbi_transfer_area(struct omap_dss_device *dssdev,
+		void (*callback)(void *data), void *data)
 {
 	u32 l;
 	int r;
-	struct omap_video_timings timings = {
-		.hsw		= 1,
-		.hfp		= 1,
-		.hbp		= 1,
-		.vsw		= 1,
-		.vfp		= 0,
-		.vbp		= 0,
-		.x_res		= width,
-		.y_res		= height,
-	};
+	struct omap_video_timings timings;
+	u16 width, height;
+
+	dssdev->driver->get_resolution(dssdev, &width, &height);
+
+	timings.x_res = width;
+	timings.y_res = height;
+	timings.hsw = 1;
+	timings.hfp = 1;
+	timings.hbp = 1;
+	timings.vsw = 1;
+	timings.vfp = 0;
+	timings.vbp = 0;
 
 	/*BUG_ON(callback == 0);*/
 	BUG_ON(rfbi.framedone_callback != NULL);
@@ -777,53 +780,10 @@ int omap_rfbi_configure(struct omap_dss_device *dssdev, int pixel_size,
 }
 EXPORT_SYMBOL(omap_rfbi_configure);
 
-int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
-		u16 *x, u16 *y, u16 *w, u16 *h)
-{
-	u16 dw, dh;
-	struct omap_video_timings timings = {
-		.hsw		= 1,
-		.hfp		= 1,
-		.hbp		= 1,
-		.vsw		= 1,
-		.vfp		= 0,
-		.vbp		= 0,
-		.x_res		= *w,
-		.y_res		= *h,
-	};
-
-	dssdev->driver->get_resolution(dssdev, &dw, &dh);
-
-	if  (*x > dw || *y > dh)
-		return -EINVAL;
-
-	if (*x + *w > dw)
-		return -EINVAL;
-
-	if (*y + *h > dh)
-		return -EINVAL;
-
-	if (*w == 1)
-		return -EINVAL;
-
-	if (*w == 0 || *h == 0)
-		return -EINVAL;
-
-	dss_mgr_set_timings(dssdev->manager, &timings);
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_rfbi_prepare_update);
-
-int omap_rfbi_update(struct omap_dss_device *dssdev,
-		u16 x, u16 y, u16 w, u16 h,
-		void (*callback)(void *), void *data)
+int omap_rfbi_update(struct omap_dss_device *dssdev, void (*callback)(void *),
+		void *data)
 {
-	int r;
-
-	r = rfbi_transfer_area(dssdev, w, h, callback, data);
-
-	return r;
+	return rfbi_transfer_area(dssdev, callback, data);
 }
 EXPORT_SYMBOL(omap_rfbi_update);
 
-- 
cgit v1.2.1


From 6ff9dd5a6fe624726f7004ddf995bb2b3409e1d5 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 13 Aug 2012 15:12:10 +0530
Subject: OMAPDSS: RFBI: Add function to set panel size

RFBI drivers requires configuration of the update area. Since we don't support
partial updates, the size to be configures is the panel size itself.

Add a timings field in RFBI's driver data. Apart from x_res and y_res, all the
other fields are configured to an initial value when RFBI is enabled. A panel
driver is expected to call omapdss_rfbi_set_size() configure the size of the
panel.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/displays/panel-n8x0.c |  3 ++
 drivers/video/omap2/dss/rfbi.c            | 47 ++++++++++++++++++++++---------
 2 files changed, 36 insertions(+), 14 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-n8x0.c b/drivers/video/omap2/displays/panel-n8x0.c
index 1d421b5ffae4..839ef84bb3d6 100644
--- a/drivers/video/omap2/displays/panel-n8x0.c
+++ b/drivers/video/omap2/displays/panel-n8x0.c
@@ -297,6 +297,9 @@ static int n8x0_panel_power_on(struct omap_dss_device *dssdev)
 			goto err_plat_en;
 	}
 
+	omapdss_rfbi_set_size(dssdev, dssdev->panel.timings.x_res,
+		dssdev->panel.timings.y_res);
+
 	r = omapdss_rfbi_display_enable(dssdev);
 	if (r)
 		goto err_rfbi_en;
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 6bc264818edf..40abee72aaee 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -111,6 +111,8 @@ static struct {
 	struct omap_dss_device *dssdev[2];
 
 	struct semaphore bus_lock;
+
+	struct omap_video_timings timings;
 } rfbi;
 
 static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val)
@@ -305,26 +307,15 @@ static int rfbi_transfer_area(struct omap_dss_device *dssdev,
 {
 	u32 l;
 	int r;
-	struct omap_video_timings timings;
-	u16 width, height;
-
-	dssdev->driver->get_resolution(dssdev, &width, &height);
-
-	timings.x_res = width;
-	timings.y_res = height;
-	timings.hsw = 1;
-	timings.hfp = 1;
-	timings.hbp = 1;
-	timings.vsw = 1;
-	timings.vfp = 0;
-	timings.vbp = 0;
+	u16 width = rfbi.timings.x_res;
+	u16 height = rfbi.timings.y_res;
 
 	/*BUG_ON(callback == 0);*/
 	BUG_ON(rfbi.framedone_callback != NULL);
 
 	DSSDBG("rfbi_transfer_area %dx%d\n", width, height);
 
-	dss_mgr_set_timings(dssdev->manager, &timings);
+	dss_mgr_set_timings(dssdev->manager, &rfbi.timings);
 
 	r = dss_mgr_enable(dssdev->manager);
 	if (r)
@@ -787,6 +778,13 @@ int omap_rfbi_update(struct omap_dss_device *dssdev, void (*callback)(void *),
 }
 EXPORT_SYMBOL(omap_rfbi_update);
 
+void omapdss_rfbi_set_size(struct omap_dss_device *dssdev, u16 w, u16 h)
+{
+	rfbi.timings.x_res = w;
+	rfbi.timings.y_res = h;
+}
+EXPORT_SYMBOL(omapdss_rfbi_set_size);
+
 static void rfbi_dump_regs(struct seq_file *s)
 {
 #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r))
@@ -841,6 +839,27 @@ static void rfbi_config_lcd_manager(struct omap_dss_device *dssdev)
 	mgr_config.lcden_sig_polarity = 0;
 
 	dss_mgr_set_lcd_config(dssdev->manager, &mgr_config);
+
+	/*
+	 * Set rfbi.timings with default values, the x_res and y_res fields
+	 * are expected to be already configured by the panel driver via
+	 * omapdss_rfbi_set_size()
+	 */
+	rfbi.timings.hsw = 1;
+	rfbi.timings.hfp = 1;
+	rfbi.timings.hbp = 1;
+	rfbi.timings.vsw = 1;
+	rfbi.timings.vfp = 0;
+	rfbi.timings.vbp = 0;
+
+	rfbi.timings.interlace = false;
+	rfbi.timings.hsync_level = OMAPDSS_SIG_ACTIVE_HIGH;
+	rfbi.timings.vsync_level = OMAPDSS_SIG_ACTIVE_HIGH;
+	rfbi.timings.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
+	rfbi.timings.de_level = OMAPDSS_SIG_ACTIVE_HIGH;
+	rfbi.timings.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES;
+
+	dss_mgr_set_timings(dssdev->manager, &rfbi.timings);
 }
 
 int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
-- 
cgit v1.2.1


From 02c3960b1eeafd5ed30323e1bb86bfa099b46921 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 10 Aug 2012 15:01:33 +0530
Subject: OMAPDSS: DSI: Maintain copy of pixel format in driver data

The DSI driver currently relies on the omap_dss_device struct to receive the
desired pixel format of the panel. This makes the DSI interface driver dependent
on the omap_dss_device struct.

Make the DSI driver data maintain it's own pixel format field. The panel driver
is expected to call omapdss_dsi_set_pixel_format() to configure the pixel format
before the interface is enabled.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/displays/panel-taal.c |  1 +
 drivers/video/omap2/dss/dsi.c             | 34 +++++++++++++++++++++++--------
 2 files changed, 26 insertions(+), 9 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index c3bca2fb15d4..de1dd20644f2 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -1062,6 +1062,7 @@ static int taal_power_on(struct omap_dss_device *dssdev)
 
 	omapdss_dsi_set_size(dssdev, dssdev->panel.timings.x_res,
 		dssdev->panel.timings.y_res);
+	omapdss_dsi_set_pixel_format(dssdev, OMAP_DSS_DSI_FMT_RGB888);
 
 	r = omapdss_dsi_display_enable(dssdev);
 	if (r) {
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 36e2aa79bca6..8f94cb806145 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -334,6 +334,7 @@ struct dsi_data {
 
 	struct dss_lcd_mgr_config mgr_config;
 	struct omap_video_timings timings;
+	enum omap_dss_dsi_pixel_format pix_fmt;
 };
 
 struct dsi_packet_sent_handler_data {
@@ -3612,7 +3613,7 @@ static void dsi_config_vp_num_line_buffers(struct omap_dss_device *dssdev)
 
 	if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) {
 		struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
-		int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
+		int bpp = dsi_get_pixel_size(dsi->pix_fmt);
 		unsigned line_buf_size = dsi_get_line_buf_size(dsidev);
 		struct omap_video_timings *timings = &dsi->timings;
 		/*
@@ -3744,7 +3745,7 @@ static void dsi_config_cmd_mode_interleaving(struct omap_dss_device *dssdev)
 	int tclk_trail, ths_exit, exiths_clk;
 	bool ddr_alwon;
 	struct omap_video_timings *timings = &dsi->timings;
-	int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
+	int bpp = dsi_get_pixel_size(dsi->pix_fmt);
 	int ndl = dsi->num_lanes_used - 1;
 	int dsi_fclk_hsdiv = dssdev->clocks.dsi.regm_dsi + 1;
 	int hsa_interleave_hs = 0, hsa_interleave_lp = 0;
@@ -3854,6 +3855,7 @@ static void dsi_config_cmd_mode_interleaving(struct omap_dss_device *dssdev)
 static int dsi_proto_config(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	u32 r;
 	int buswidth = 0;
 
@@ -3873,7 +3875,7 @@ static int dsi_proto_config(struct omap_dss_device *dssdev)
 	dsi_set_lp_rx_timeout(dsidev, 0x1fff, true, true);
 	dsi_set_hs_tx_timeout(dsidev, 0x1fff, true, true);
 
-	switch (dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt)) {
+	switch (dsi_get_pixel_size(dsi->pix_fmt)) {
 	case 16:
 		buswidth = 0;
 		break;
@@ -3997,7 +3999,7 @@ static void dsi_proto_timings(struct omap_dss_device *dssdev)
 		int window_sync = dssdev->panel.dsi_vm_data.window_sync;
 		bool hsync_end = dssdev->panel.dsi_vm_data.vp_hsync_end;
 		struct omap_video_timings *timings = &dsi->timings;
-		int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
+		int bpp = dsi_get_pixel_size(dsi->pix_fmt);
 		int tl, t_he, width_bytes;
 
 		t_he = hsync_end ?
@@ -4106,13 +4108,13 @@ int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
-	int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
+	int bpp = dsi_get_pixel_size(dsi->pix_fmt);
 	u8 data_type;
 	u16 word_count;
 	int r;
 
 	if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) {
-		switch (dssdev->panel.dsi_pix_fmt) {
+		switch (dsi->pix_fmt) {
 		case OMAP_DSS_DSI_FMT_RGB888:
 			data_type = MIPI_DSI_PACKED_PIXEL_STREAM_24;
 			break;
@@ -4199,7 +4201,7 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev)
 
 	dsi_vc_config_source(dsidev, channel, DSI_VC_SOURCE_VP);
 
-	bytespp	= dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt) / 8;
+	bytespp	= dsi_get_pixel_size(dsi->pix_fmt) / 8;
 	bytespl = w * bytespp;
 	bytespf = bytespl * h;
 
@@ -4336,7 +4338,7 @@ int omap_dsi_update(struct omap_dss_device *dssdev, int channel,
 
 #ifdef DEBUG
 	dsi->update_bytes = dw * dh *
-		dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt) / 8;
+		dsi_get_pixel_size(dsi->pix_fmt) / 8;
 #endif
 	dsi_update_screen_dispc(dssdev);
 
@@ -4420,7 +4422,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 
 	dsi->mgr_config.io_pad_mode = DSS_IO_PAD_MODE_BYPASS;
 	dsi->mgr_config.video_port_width =
-			dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
+			dsi_get_pixel_size(dsi->pix_fmt);
 	dsi->mgr_config.lcden_sig_polarity = 0;
 
 	dss_mgr_set_lcd_config(dssdev->manager, &dsi->mgr_config);
@@ -4679,6 +4681,20 @@ void omapdss_dsi_set_size(struct omap_dss_device *dssdev, u16 w, u16 h)
 }
 EXPORT_SYMBOL(omapdss_dsi_set_size);
 
+void omapdss_dsi_set_pixel_format(struct omap_dss_device *dssdev,
+		enum omap_dss_dsi_pixel_format fmt)
+{
+	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+
+	mutex_lock(&dsi->lock);
+
+	dsi->pix_fmt = fmt;
+
+	mutex_unlock(&dsi->lock);
+}
+EXPORT_SYMBOL(omapdss_dsi_set_pixel_format);
+
 static int __init dsi_init_display(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
-- 
cgit v1.2.1


From b02875be08fd2ca7a195154c9f1c538508ca0d5a Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 13 Aug 2012 15:26:49 +0530
Subject: OMAPDSS: RFBI: Maintain copy of pixel size in driver data

The RFBI driver currently relies on the omap_dss_device struct to receive the
desired pixel size of the panel. This makes the RFBI interface driver dependent
on the omap_dss_device struct.

Make the RFBI driver data maintain it's own pixel format field. A panel driver
is expected to call omapdss_rfbi_set_pixel_size() to configure the pixel format
before enabling the interface or calling omap_rfbi_configure().

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/displays/panel-n8x0.c |  9 +++++++--
 drivers/video/omap2/dss/rfbi.c            | 20 +++++++++++++-------
 2 files changed, 20 insertions(+), 9 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-n8x0.c b/drivers/video/omap2/displays/panel-n8x0.c
index 839ef84bb3d6..9565958ebaa9 100644
--- a/drivers/video/omap2/displays/panel-n8x0.c
+++ b/drivers/video/omap2/displays/panel-n8x0.c
@@ -150,11 +150,15 @@ static void blizzard_ctrl_setup_update(struct omap_dss_device *dssdev,
 			BLIZZARD_SRC_WRITE_LCD :
 			BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE;
 
-	omap_rfbi_configure(dssdev, 16, 8);
+	omapdss_rfbi_set_pixel_size(dssdev, 16);
+
+	omap_rfbi_configure(dssdev, 8);
 
 	blizzard_write(BLIZZARD_INPUT_WIN_X_START_0, tmp, 18);
 
-	omap_rfbi_configure(dssdev, 16, 16);
+	omapdss_rfbi_set_pixel_size(dssdev, 16);
+
+	omap_rfbi_configure(dssdev, 16);
 }
 
 static void mipid_transfer(struct spi_device *spi, int cmd, const u8 *wbuf,
@@ -299,6 +303,7 @@ static int n8x0_panel_power_on(struct omap_dss_device *dssdev)
 
 	omapdss_rfbi_set_size(dssdev, dssdev->panel.timings.x_res,
 		dssdev->panel.timings.y_res);
+	omapdss_rfbi_set_pixel_size(dssdev, dssdev->ctrl.pixel_size);
 
 	r = omapdss_rfbi_display_enable(dssdev);
 	if (r)
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 40abee72aaee..98c65223789e 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -113,6 +113,7 @@ static struct {
 	struct semaphore bus_lock;
 
 	struct omap_video_timings timings;
+	int pixel_size;
 } rfbi;
 
 static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val)
@@ -764,10 +765,10 @@ static int rfbi_configure(int rfbi_module, int bpp, int lines)
 	return 0;
 }
 
-int omap_rfbi_configure(struct omap_dss_device *dssdev, int pixel_size,
-		int data_lines)
+int omap_rfbi_configure(struct omap_dss_device *dssdev, int data_lines)
 {
-	return rfbi_configure(dssdev->phy.rfbi.channel, pixel_size, data_lines);
+	return rfbi_configure(dssdev->phy.rfbi.channel, rfbi.pixel_size,
+			data_lines);
 }
 EXPORT_SYMBOL(omap_rfbi_configure);
 
@@ -785,6 +786,12 @@ void omapdss_rfbi_set_size(struct omap_dss_device *dssdev, u16 w, u16 h)
 }
 EXPORT_SYMBOL(omapdss_rfbi_set_size);
 
+void omapdss_rfbi_set_pixel_size(struct omap_dss_device *dssdev, int pixel_size)
+{
+	rfbi.pixel_size = pixel_size;
+}
+EXPORT_SYMBOL(omapdss_rfbi_set_pixel_size);
+
 static void rfbi_dump_regs(struct seq_file *s)
 {
 #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r))
@@ -835,7 +842,7 @@ static void rfbi_config_lcd_manager(struct omap_dss_device *dssdev)
 	/* Do we need fifohandcheck for RFBI? */
 	mgr_config.fifohandcheck = false;
 
-	mgr_config.video_port_width = dssdev->ctrl.pixel_size;
+	mgr_config.video_port_width = rfbi.pixel_size;
 	mgr_config.lcden_sig_polarity = 0;
 
 	dss_mgr_set_lcd_config(dssdev->manager, &mgr_config);
@@ -890,9 +897,8 @@ int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
 
 	rfbi_config_lcd_manager(dssdev);
 
-	rfbi_configure(dssdev->phy.rfbi.channel,
-			       dssdev->ctrl.pixel_size,
-			       dssdev->phy.rfbi.data_lines);
+	rfbi_configure(dssdev->phy.rfbi.channel, rfbi.pixel_size,
+			dssdev->phy.rfbi.data_lines);
 
 	rfbi_set_timings(dssdev->phy.rfbi.channel,
 			 &dssdev->ctrl.rfbi_timings);
-- 
cgit v1.2.1


From 475989b763668f0794d6a8ee34a1ca0e784831e2 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 13 Aug 2012 15:28:15 +0530
Subject: OMAPDSS: RFBI: Maintain copy of number of data lines in driver data

The RFBI driver currently relies on the omap_dss_device struct to configure the
number of data lines as specified by the panel. This makes the RFBI interface
driver dependent on the omap_dss_device struct.

Make the RFBI driver data maintain it's own data lines field. A panel driver
is expected to call omapdss_rfbi_set_data_lines() to configure the pixel format
before enabling the interface or calling omap_rfbi_configure().

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/displays/panel-n8x0.c |  7 +++++--
 drivers/video/omap2/dss/rfbi.c            | 13 ++++++++++---
 2 files changed, 15 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-n8x0.c b/drivers/video/omap2/displays/panel-n8x0.c
index 9565958ebaa9..3ffd987ad8b2 100644
--- a/drivers/video/omap2/displays/panel-n8x0.c
+++ b/drivers/video/omap2/displays/panel-n8x0.c
@@ -151,14 +151,16 @@ static void blizzard_ctrl_setup_update(struct omap_dss_device *dssdev,
 			BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE;
 
 	omapdss_rfbi_set_pixel_size(dssdev, 16);
+	omapdss_rfbi_set_data_lines(dssdev, 8);
 
-	omap_rfbi_configure(dssdev, 8);
+	omap_rfbi_configure(dssdev);
 
 	blizzard_write(BLIZZARD_INPUT_WIN_X_START_0, tmp, 18);
 
 	omapdss_rfbi_set_pixel_size(dssdev, 16);
+	omapdss_rfbi_set_data_lines(dssdev, 16);
 
-	omap_rfbi_configure(dssdev, 16);
+	omap_rfbi_configure(dssdev);
 }
 
 static void mipid_transfer(struct spi_device *spi, int cmd, const u8 *wbuf,
@@ -304,6 +306,7 @@ static int n8x0_panel_power_on(struct omap_dss_device *dssdev)
 	omapdss_rfbi_set_size(dssdev, dssdev->panel.timings.x_res,
 		dssdev->panel.timings.y_res);
 	omapdss_rfbi_set_pixel_size(dssdev, dssdev->ctrl.pixel_size);
+	omapdss_rfbi_set_data_lines(dssdev, dssdev->phy.rfbi.data_lines);
 
 	r = omapdss_rfbi_display_enable(dssdev);
 	if (r)
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 98c65223789e..698d5b92f8e2 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -114,6 +114,7 @@ static struct {
 
 	struct omap_video_timings timings;
 	int pixel_size;
+	int data_lines;
 } rfbi;
 
 static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val)
@@ -765,10 +766,10 @@ static int rfbi_configure(int rfbi_module, int bpp, int lines)
 	return 0;
 }
 
-int omap_rfbi_configure(struct omap_dss_device *dssdev, int data_lines)
+int omap_rfbi_configure(struct omap_dss_device *dssdev)
 {
 	return rfbi_configure(dssdev->phy.rfbi.channel, rfbi.pixel_size,
-			data_lines);
+			rfbi.data_lines);
 }
 EXPORT_SYMBOL(omap_rfbi_configure);
 
@@ -792,6 +793,12 @@ void omapdss_rfbi_set_pixel_size(struct omap_dss_device *dssdev, int pixel_size)
 }
 EXPORT_SYMBOL(omapdss_rfbi_set_pixel_size);
 
+void omapdss_rfbi_set_data_lines(struct omap_dss_device *dssdev, int data_lines)
+{
+	rfbi.data_lines = data_lines;
+}
+EXPORT_SYMBOL(omapdss_rfbi_set_data_lines);
+
 static void rfbi_dump_regs(struct seq_file *s)
 {
 #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r))
@@ -898,7 +905,7 @@ int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
 	rfbi_config_lcd_manager(dssdev);
 
 	rfbi_configure(dssdev->phy.rfbi.channel, rfbi.pixel_size,
-			dssdev->phy.rfbi.data_lines);
+			rfbi.data_lines);
 
 	rfbi_set_timings(dssdev->phy.rfbi.channel,
 			 &dssdev->ctrl.rfbi_timings);
-- 
cgit v1.2.1


From c6b393d4bc8bc076589bf03433728c1fc2a44d4c Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 6 Jul 2012 15:30:52 +0530
Subject: OMAPDSS: DPI: Maintain copy of number of data lines in driver data

The DPI driver currently relies on the omap_dss_device struct to configure the
number of data lines as specified by the panel. This makes the DPI interface
driver dependent on the omap_dss_device struct.

Make the DPI driver data maintain it's own data lines field. A panel driver
is expected to call omapdss_dpi_set_data_lines() before enabling the interface.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/displays/panel-generic-dpi.c        |  1 +
 drivers/video/omap2/displays/panel-lgphilips-lb035q02.c |  1 +
 drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c |  1 +
 drivers/video/omap2/displays/panel-picodlp.c            |  1 +
 drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c  |  1 +
 drivers/video/omap2/displays/panel-tfp410.c             |  1 +
 drivers/video/omap2/displays/panel-tpo-td043mtea1.c     |  1 +
 drivers/video/omap2/dss/dpi.c                           | 13 ++++++++++++-
 8 files changed, 19 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
index a07e18c8f71b..88295c526815 100644
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ b/drivers/video/omap2/displays/panel-generic-dpi.c
@@ -566,6 +566,7 @@ static int generic_dpi_panel_power_on(struct omap_dss_device *dssdev)
 		return 0;
 
 	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+	omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
 
 	r = omapdss_dpi_display_enable(dssdev);
 	if (r)
diff --git a/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
index 7e52aee36f4f..90c1cabf244e 100644
--- a/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
@@ -56,6 +56,7 @@ static int lb035q02_panel_power_on(struct omap_dss_device *dssdev)
 		return 0;
 
 	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+	omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
 
 	r = omapdss_dpi_display_enable(dssdev);
 	if (r)
diff --git a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
index e501c401ccb0..908fd268f3dc 100644
--- a/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
+++ b/drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
@@ -176,6 +176,7 @@ static int nec_8048_panel_power_on(struct omap_dss_device *dssdev)
 		return 0;
 
 	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+	omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
 
 	r = omapdss_dpi_display_enable(dssdev);
 	if (r)
diff --git a/drivers/video/omap2/displays/panel-picodlp.c b/drivers/video/omap2/displays/panel-picodlp.c
index 0d7a8ff50f16..9df87640ddd2 100644
--- a/drivers/video/omap2/displays/panel-picodlp.c
+++ b/drivers/video/omap2/displays/panel-picodlp.c
@@ -379,6 +379,7 @@ static int picodlp_panel_power_on(struct omap_dss_device *dssdev)
 	msleep(1000);
 
 	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+	omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
 
 	r = omapdss_dpi_display_enable(dssdev);
 	if (r) {
diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
index 1486a81fc8b6..1ec3b277ff15 100644
--- a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
@@ -143,6 +143,7 @@ static int sharp_ls_power_on(struct omap_dss_device *dssdev)
 		return 0;
 
 	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+	omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
 
 	r = omapdss_dpi_display_enable(dssdev);
 	if (r)
diff --git a/drivers/video/omap2/displays/panel-tfp410.c b/drivers/video/omap2/displays/panel-tfp410.c
index 9397236084b1..4be9a59664d5 100644
--- a/drivers/video/omap2/displays/panel-tfp410.c
+++ b/drivers/video/omap2/displays/panel-tfp410.c
@@ -66,6 +66,7 @@ static int tfp410_power_on(struct omap_dss_device *dssdev)
 		return 0;
 
 	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+	omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
 
 	r = omapdss_dpi_display_enable(dssdev);
 	if (r)
diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
index 3f47f5f594b4..b5e6dbc59f0a 100644
--- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
@@ -338,6 +338,7 @@ static int tpo_td043_enable_dss(struct omap_dss_device *dssdev)
 		return 0;
 
 	omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+	omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
 
 	r = omapdss_dpi_display_enable(dssdev);
 	if (r)
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index d561a9198a8d..f260343e2451 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -43,6 +43,7 @@ static struct {
 
 	struct omap_video_timings timings;
 	struct dss_lcd_mgr_config mgr_config;
+	int data_lines;
 } dpi;
 
 static struct platform_device *dpi_get_dsidev(enum omap_dss_clk_source clk)
@@ -161,7 +162,7 @@ static void dpi_config_lcd_manager(struct omap_dss_device *dssdev)
 	dpi.mgr_config.stallmode = false;
 	dpi.mgr_config.fifohandcheck = false;
 
-	dpi.mgr_config.video_port_width = dssdev->phy.dpi.data_lines;
+	dpi.mgr_config.video_port_width = dpi.data_lines;
 
 	dpi.mgr_config.lcden_sig_polarity = 0;
 
@@ -347,6 +348,16 @@ int dpi_check_timings(struct omap_dss_device *dssdev,
 }
 EXPORT_SYMBOL(dpi_check_timings);
 
+void omapdss_dpi_set_data_lines(struct omap_dss_device *dssdev, int data_lines)
+{
+	mutex_lock(&dpi.lock);
+
+	dpi.data_lines = data_lines;
+
+	mutex_unlock(&dpi.lock);
+}
+EXPORT_SYMBOL(omapdss_dpi_set_data_lines);
+
 static int __init dpi_init_display(struct omap_dss_device *dssdev)
 {
 	DSSDBG("init_display\n");
-- 
cgit v1.2.1


From 889b4fd7eed2d7c155dc642e15a714f87ab2842c Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 20 Jul 2012 17:18:49 +0530
Subject: OMAPDSS: SDI: Maintain copy of data pairs in driver data

The SDI driver currently relies on the omap_dss_device struct to configure the
number of data pairs as specified by the panel. This makes the SDI interface
driver dependent on the omap_dss_device struct.

Make the SDI driver data maintain it's own data lines field. A panel driver
is expected to call omapdss_sdi_set_datapairs() before enabling the interface.
Even though we configure the number of data pairs here, this function would be
finally mapped to a generic interface op called set_data_lines. The datapairs
argument type has been changed from u8 to int at some places to be in sync with
the 'set_data_lines' ops of other interfaces.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/displays/panel-acx565akm.c |  1 +
 drivers/video/omap2/dss/dss.c                  |  2 +-
 drivers/video/omap2/dss/dss.h                  |  2 +-
 drivers/video/omap2/dss/sdi.c                  | 10 +++++++++-
 4 files changed, 12 insertions(+), 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-acx565akm.c b/drivers/video/omap2/displays/panel-acx565akm.c
index 77fe59f6a8cd..c835aa70f96f 100644
--- a/drivers/video/omap2/displays/panel-acx565akm.c
+++ b/drivers/video/omap2/displays/panel-acx565akm.c
@@ -601,6 +601,7 @@ static int acx_panel_power_on(struct omap_dss_device *dssdev)
 	mutex_lock(&md->mutex);
 
 	omapdss_sdi_set_timings(dssdev, &dssdev->panel.timings);
+	omapdss_sdi_set_datapairs(dssdev, dssdev->phy.sdi.datapairs);
 
 	r = omapdss_sdi_display_enable(dssdev);
 	if (r) {
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 4491ab7ef800..92353be58036 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -144,7 +144,7 @@ static void dss_restore_context(void)
 #undef SR
 #undef RR
 
-void dss_sdi_init(u8 datapairs)
+void dss_sdi_init(int datapairs)
 {
 	u32 l;
 
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 78493dbd38eb..f919dc8d94b8 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -279,7 +279,7 @@ void dss_dump_clocks(struct seq_file *s);
 void dss_debug_dump_clocks(struct seq_file *s);
 #endif
 
-void dss_sdi_init(u8 datapairs);
+void dss_sdi_init(int datapairs);
 int dss_sdi_enable(void);
 void dss_sdi_disable(void);
 
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 6ec6614009ed..3bf1bfe29585 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -35,6 +35,7 @@ static struct {
 
 	struct dss_lcd_mgr_config mgr_config;
 	struct omap_video_timings timings;
+	int datapairs;
 } sdi;
 
 static void sdi_config_lcd_manager(struct omap_dss_device *dssdev)
@@ -106,7 +107,8 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 
 	sdi_config_lcd_manager(dssdev);
 
-	dss_sdi_init(dssdev->phy.sdi.datapairs);
+	dss_sdi_init(sdi.datapairs);
+
 	r = dss_sdi_enable();
 	if (r)
 		goto err_sdi_enable;
@@ -164,6 +166,12 @@ void omapdss_sdi_set_timings(struct omap_dss_device *dssdev,
 }
 EXPORT_SYMBOL(omapdss_sdi_set_timings);
 
+void omapdss_sdi_set_datapairs(struct omap_dss_device *dssdev, int datapairs)
+{
+	sdi.datapairs = datapairs;
+}
+EXPORT_SYMBOL(omapdss_sdi_set_datapairs);
+
 static int __init sdi_init_display(struct omap_dss_device *dssdev)
 {
 	DSSDBG("SDI init\n");
-- 
cgit v1.2.1


From dca2b1522ccab28d03fb79f6e70e70ea78033d52 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Thu, 16 Aug 2012 18:02:00 +0530
Subject: OMAPDSS: DSI: Maintain copy of operation mode in driver data

The DSI driver currently relies on the omap_dss_device struct to know the mode
of operation of the DSI protocol(command or video mode). This makes the DSI
interface driver dependent on the omap_dss_device struct.

Make the DSI driver data maintain it's own operation mode field. The panel
driver is expected to call omapdss_dsi_set_operation_mode() before the interface
is enabled.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/displays/panel-taal.c |  1 +
 drivers/video/omap2/dss/dsi.c             | 42 +++++++++++++++++++++++--------
 2 files changed, 32 insertions(+), 11 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index de1dd20644f2..77aed0e51f9b 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -1063,6 +1063,7 @@ static int taal_power_on(struct omap_dss_device *dssdev)
 	omapdss_dsi_set_size(dssdev, dssdev->panel.timings.x_res,
 		dssdev->panel.timings.y_res);
 	omapdss_dsi_set_pixel_format(dssdev, OMAP_DSS_DSI_FMT_RGB888);
+	omapdss_dsi_set_operation_mode(dssdev, OMAP_DSS_DSI_CMD_MODE);
 
 	r = omapdss_dsi_display_enable(dssdev);
 	if (r) {
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 8f94cb806145..c10c8cb373a2 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -335,6 +335,7 @@ struct dsi_data {
 	struct dss_lcd_mgr_config mgr_config;
 	struct omap_video_timings timings;
 	enum omap_dss_dsi_pixel_format pix_fmt;
+	enum omap_dss_dsi_mode mode;
 };
 
 struct dsi_packet_sent_handler_data {
@@ -2362,7 +2363,7 @@ static int dsi_cio_init(struct omap_dss_device *dssdev)
 
 	dsi_cio_timings(dsidev);
 
-	if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) {
+	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
 		/* DDR_CLK_ALWAYS_ON */
 		REG_FLD_MOD(dsidev, DSI_CLK_CTRL,
 			dssdev->panel.dsi_vm_data.ddr_clk_always_on, 13, 13);
@@ -3609,9 +3610,10 @@ static void dsi_set_hs_tx_timeout(struct platform_device *dsidev,
 static void dsi_config_vp_num_line_buffers(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	int num_line_buffers;
 
-	if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) {
+	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
 		struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 		int bpp = dsi_get_pixel_size(dsi->pix_fmt);
 		unsigned line_buf_size = dsi_get_line_buf_size(dsidev);
@@ -3909,7 +3911,7 @@ static int dsi_proto_config(struct omap_dss_device *dssdev)
 
 	dsi_config_vp_num_line_buffers(dssdev);
 
-	if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) {
+	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
 		dsi_config_vp_sync_events(dssdev);
 		dsi_config_blanking_modes(dssdev);
 		dsi_config_cmd_mode_interleaving(dssdev);
@@ -3988,7 +3990,7 @@ static void dsi_proto_timings(struct omap_dss_device *dssdev)
 	DSSDBG("enter_hs_mode_lat %u, exit_hs_mode_lat %u\n",
 			enter_hs_mode_lat, exit_hs_mode_lat);
 
-	 if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) {
+	 if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
 		/* TODO: Implement a video mode check_timings function */
 		int hsa = dssdev->panel.dsi_vm_data.hsa;
 		int hfp = dssdev->panel.dsi_vm_data.hfp;
@@ -4113,7 +4115,7 @@ int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 	u16 word_count;
 	int r;
 
-	if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) {
+	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
 		switch (dsi->pix_fmt) {
 		case OMAP_DSS_DSI_FMT_RGB888:
 			data_type = MIPI_DSI_PACKED_PIXEL_STREAM_24;
@@ -4149,7 +4151,7 @@ int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 
 	r = dss_mgr_enable(dssdev->manager);
 	if (r) {
-		if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) {
+		if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
 			dsi_if_enable(dsidev, false);
 			dsi_vc_enable(dsidev, channel, false);
 		}
@@ -4164,8 +4166,9 @@ EXPORT_SYMBOL(dsi_enable_video_output);
 void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 
-	if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_VIDEO_MODE) {
+	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
 		dsi_if_enable(dsidev, false);
 		dsi_vc_enable(dsidev, channel, false);
 
@@ -4379,7 +4382,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 	int r;
 	u32 irq = 0;
 
-	if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_CMD_MODE) {
+	if (dsi->mode == OMAP_DSS_DSI_CMD_MODE) {
 		dsi->timings.hsw = 1;
 		dsi->timings.hfp = 1;
 		dsi->timings.hbp = 1;
@@ -4429,7 +4432,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 
 	return 0;
 err1:
-	if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_CMD_MODE)
+	if (dsi->mode == OMAP_DSS_DSI_CMD_MODE)
 		omap_dispc_unregister_isr(dsi_framedone_irq_callback,
 			(void *) dssdev, irq);
 err:
@@ -4438,7 +4441,10 @@ err:
 
 static void dsi_display_uninit_dispc(struct omap_dss_device *dssdev)
 {
-	if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_CMD_MODE) {
+	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+
+	if (dsi->mode == OMAP_DSS_DSI_CMD_MODE) {
 		u32 irq;
 
 		irq = dispc_mgr_get_framedone_irq(dssdev->manager->id);
@@ -4695,6 +4701,20 @@ void omapdss_dsi_set_pixel_format(struct omap_dss_device *dssdev,
 }
 EXPORT_SYMBOL(omapdss_dsi_set_pixel_format);
 
+void omapdss_dsi_set_operation_mode(struct omap_dss_device *dssdev,
+		enum omap_dss_dsi_mode mode)
+{
+	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+
+	mutex_lock(&dsi->lock);
+
+	dsi->mode = mode;
+
+	mutex_unlock(&dsi->lock);
+}
+EXPORT_SYMBOL(omapdss_dsi_set_operation_mode);
+
 static int __init dsi_init_display(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@@ -4702,7 +4722,7 @@ static int __init dsi_init_display(struct omap_dss_device *dssdev)
 
 	DSSDBG("DSI init\n");
 
-	if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_CMD_MODE) {
+	if (dsi->mode == OMAP_DSS_DSI_CMD_MODE) {
 		dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
 			OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
 	}
-- 
cgit v1.2.1


From 6b84937577486a79cbc2196573ff7387a9f75cb0 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 13 Aug 2012 22:12:24 +0530
Subject: OMAPDSS: DSI: Rename dsi_videomode_data to dsi_videomode_timings

The struct omap_dss_dsi_videomode_data holds fields which need to be configured
for DSI to operate in video mode. Rename the struct to dsi_videomode_timings.

One reason to do this is because most of the fields in the struct are timings
related. The other reason is to create a generic op for output specific
timings. This generic op can be considered as a way to set custom or private
timings for the output.

In the case of OMAP, DSI and RFBI require some more timings apart from the
relgular DISPC timings. The structs omap_dss_videomode_timings and rfbi_timings
can be considered as these output specific timings respectively.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dsi.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index c10c8cb373a2..62549f61ad2f 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -2366,7 +2366,7 @@ static int dsi_cio_init(struct omap_dss_device *dssdev)
 	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
 		/* DDR_CLK_ALWAYS_ON */
 		REG_FLD_MOD(dsidev, DSI_CLK_CTRL,
-			dssdev->panel.dsi_vm_data.ddr_clk_always_on, 13, 13);
+			dssdev->panel.dsi_vm_timings.ddr_clk_always_on, 13, 13);
 	}
 
 	dsi->ulps_enabled = false;
@@ -2704,7 +2704,7 @@ void omapdss_dsi_vc_enable_hs(struct omap_dss_device *dssdev, int channel,
 	dsi_force_tx_stop_mode_io(dsidev);
 
 	/* start the DDR clock by sending a NULL packet */
-	if (dssdev->panel.dsi_vm_data.ddr_clk_always_on && enable)
+	if (dssdev->panel.dsi_vm_timings.ddr_clk_always_on && enable)
 		dsi_vc_send_null(dssdev, channel);
 }
 EXPORT_SYMBOL(omapdss_dsi_vc_enable_hs);
@@ -3638,8 +3638,8 @@ static void dsi_config_vp_num_line_buffers(struct omap_dss_device *dssdev)
 static void dsi_config_vp_sync_events(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
-	bool vsync_end = dssdev->panel.dsi_vm_data.vp_vsync_end;
-	bool hsync_end = dssdev->panel.dsi_vm_data.vp_hsync_end;
+	bool vsync_end = dssdev->panel.dsi_vm_timings.vp_vsync_end;
+	bool hsync_end = dssdev->panel.dsi_vm_timings.vp_hsync_end;
 	u32 r;
 
 	r = dsi_read_reg(dsidev, DSI_CTRL);
@@ -3656,10 +3656,10 @@ static void dsi_config_vp_sync_events(struct omap_dss_device *dssdev)
 static void dsi_config_blanking_modes(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
-	int blanking_mode = dssdev->panel.dsi_vm_data.blanking_mode;
-	int hfp_blanking_mode = dssdev->panel.dsi_vm_data.hfp_blanking_mode;
-	int hbp_blanking_mode = dssdev->panel.dsi_vm_data.hbp_blanking_mode;
-	int hsa_blanking_mode = dssdev->panel.dsi_vm_data.hsa_blanking_mode;
+	int blanking_mode = dssdev->panel.dsi_vm_timings.blanking_mode;
+	int hfp_blanking_mode = dssdev->panel.dsi_vm_timings.hfp_blanking_mode;
+	int hbp_blanking_mode = dssdev->panel.dsi_vm_timings.hbp_blanking_mode;
+	int hsa_blanking_mode = dssdev->panel.dsi_vm_timings.hsa_blanking_mode;
 	u32 r;
 
 	/*
@@ -3992,14 +3992,14 @@ static void dsi_proto_timings(struct omap_dss_device *dssdev)
 
 	 if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
 		/* TODO: Implement a video mode check_timings function */
-		int hsa = dssdev->panel.dsi_vm_data.hsa;
-		int hfp = dssdev->panel.dsi_vm_data.hfp;
-		int hbp = dssdev->panel.dsi_vm_data.hbp;
-		int vsa = dssdev->panel.dsi_vm_data.vsa;
-		int vfp = dssdev->panel.dsi_vm_data.vfp;
-		int vbp = dssdev->panel.dsi_vm_data.vbp;
-		int window_sync = dssdev->panel.dsi_vm_data.window_sync;
-		bool hsync_end = dssdev->panel.dsi_vm_data.vp_hsync_end;
+		int hsa = dssdev->panel.dsi_vm_timings.hsa;
+		int hfp = dssdev->panel.dsi_vm_timings.hfp;
+		int hbp = dssdev->panel.dsi_vm_timings.hbp;
+		int vsa = dssdev->panel.dsi_vm_timings.vsa;
+		int vfp = dssdev->panel.dsi_vm_timings.vfp;
+		int vbp = dssdev->panel.dsi_vm_timings.vbp;
+		int window_sync = dssdev->panel.dsi_vm_timings.window_sync;
+		bool hsync_end = dssdev->panel.dsi_vm_timings.vp_hsync_end;
 		struct omap_video_timings *timings = &dsi->timings;
 		int bpp = dsi_get_pixel_size(dsi->pix_fmt);
 		int tl, t_he, width_bytes;
-- 
cgit v1.2.1


From 0b3ffe397ab2cfae526568880ab4621ff8f113c9 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 13 Aug 2012 22:13:39 +0530
Subject: OMAPDSS: DSI: Maintain copy of video mode timings in driver data

The DSI driver currently relies on the omap_dss_device struct to receive the
video mode timings requested by the panel driver. This makes the DSI interface
driver dependent on the omap_dss_device struct.

Make the DSI driver data maintain it's own video mode timings field. The panel
driver is expected to call omapdss_dsi_set_videomode_timings() to configure the
video mode timings before the interface is enabled.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dsi.c | 50 +++++++++++++++++++++++++++++--------------
 1 file changed, 34 insertions(+), 16 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 62549f61ad2f..96d0024ada40 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -336,6 +336,7 @@ struct dsi_data {
 	struct omap_video_timings timings;
 	enum omap_dss_dsi_pixel_format pix_fmt;
 	enum omap_dss_dsi_mode mode;
+	struct omap_dss_dsi_videomode_timings vm_timings;
 };
 
 struct dsi_packet_sent_handler_data {
@@ -2366,7 +2367,7 @@ static int dsi_cio_init(struct omap_dss_device *dssdev)
 	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
 		/* DDR_CLK_ALWAYS_ON */
 		REG_FLD_MOD(dsidev, DSI_CLK_CTRL,
-			dssdev->panel.dsi_vm_timings.ddr_clk_always_on, 13, 13);
+			dsi->vm_timings.ddr_clk_always_on, 13, 13);
 	}
 
 	dsi->ulps_enabled = false;
@@ -2688,6 +2689,7 @@ void omapdss_dsi_vc_enable_hs(struct omap_dss_device *dssdev, int channel,
 		bool enable)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 
 	DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable);
 
@@ -2704,7 +2706,7 @@ void omapdss_dsi_vc_enable_hs(struct omap_dss_device *dssdev, int channel,
 	dsi_force_tx_stop_mode_io(dsidev);
 
 	/* start the DDR clock by sending a NULL packet */
-	if (dssdev->panel.dsi_vm_timings.ddr_clk_always_on && enable)
+	if (dsi->vm_timings.ddr_clk_always_on && enable)
 		dsi_vc_send_null(dssdev, channel);
 }
 EXPORT_SYMBOL(omapdss_dsi_vc_enable_hs);
@@ -3638,8 +3640,9 @@ static void dsi_config_vp_num_line_buffers(struct omap_dss_device *dssdev)
 static void dsi_config_vp_sync_events(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
-	bool vsync_end = dssdev->panel.dsi_vm_timings.vp_vsync_end;
-	bool hsync_end = dssdev->panel.dsi_vm_timings.vp_hsync_end;
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	bool vsync_end = dsi->vm_timings.vp_vsync_end;
+	bool hsync_end = dsi->vm_timings.vp_hsync_end;
 	u32 r;
 
 	r = dsi_read_reg(dsidev, DSI_CTRL);
@@ -3656,10 +3659,11 @@ static void dsi_config_vp_sync_events(struct omap_dss_device *dssdev)
 static void dsi_config_blanking_modes(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
-	int blanking_mode = dssdev->panel.dsi_vm_timings.blanking_mode;
-	int hfp_blanking_mode = dssdev->panel.dsi_vm_timings.hfp_blanking_mode;
-	int hbp_blanking_mode = dssdev->panel.dsi_vm_timings.hbp_blanking_mode;
-	int hsa_blanking_mode = dssdev->panel.dsi_vm_timings.hsa_blanking_mode;
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	int blanking_mode = dsi->vm_timings.blanking_mode;
+	int hfp_blanking_mode = dsi->vm_timings.hfp_blanking_mode;
+	int hbp_blanking_mode = dsi->vm_timings.hbp_blanking_mode;
+	int hsa_blanking_mode = dsi->vm_timings.hsa_blanking_mode;
 	u32 r;
 
 	/*
@@ -3992,14 +3996,14 @@ static void dsi_proto_timings(struct omap_dss_device *dssdev)
 
 	 if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
 		/* TODO: Implement a video mode check_timings function */
-		int hsa = dssdev->panel.dsi_vm_timings.hsa;
-		int hfp = dssdev->panel.dsi_vm_timings.hfp;
-		int hbp = dssdev->panel.dsi_vm_timings.hbp;
-		int vsa = dssdev->panel.dsi_vm_timings.vsa;
-		int vfp = dssdev->panel.dsi_vm_timings.vfp;
-		int vbp = dssdev->panel.dsi_vm_timings.vbp;
-		int window_sync = dssdev->panel.dsi_vm_timings.window_sync;
-		bool hsync_end = dssdev->panel.dsi_vm_timings.vp_hsync_end;
+		int hsa = dsi->vm_timings.hsa;
+		int hfp = dsi->vm_timings.hfp;
+		int hbp = dsi->vm_timings.hbp;
+		int vsa = dsi->vm_timings.vsa;
+		int vfp = dsi->vm_timings.vfp;
+		int vbp = dsi->vm_timings.vbp;
+		int window_sync = dsi->vm_timings.window_sync;
+		bool hsync_end = dsi->vm_timings.vp_hsync_end;
 		struct omap_video_timings *timings = &dsi->timings;
 		int bpp = dsi_get_pixel_size(dsi->pix_fmt);
 		int tl, t_he, width_bytes;
@@ -4715,6 +4719,20 @@ void omapdss_dsi_set_operation_mode(struct omap_dss_device *dssdev,
 }
 EXPORT_SYMBOL(omapdss_dsi_set_operation_mode);
 
+void omapdss_dsi_set_videomode_timings(struct omap_dss_device *dssdev,
+		struct omap_dss_dsi_videomode_timings *timings)
+{
+	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+
+	mutex_lock(&dsi->lock);
+
+	dsi->vm_timings = *timings;
+
+	mutex_unlock(&dsi->lock);
+}
+EXPORT_SYMBOL(omapdss_dsi_set_videomode_timings);
+
 static int __init dsi_init_display(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
-- 
cgit v1.2.1


From 6e883324b2ef9971ec208da2bf2f49268c36f2bb Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 13 Aug 2012 22:23:29 +0530
Subject: OMAPDSS: RFBI: Maitain copy of rfbi timings in driver data

The RFBI driver currently relies on the omap_dss_device struct to receive the
rfbi specific timings requested by the panel driver. This makes the RFBI
interface driver dependent on the omap_dss_device struct.

Make the RFBI driver data maintain it's own rfbi specific timings field. The
panel driver is expected to call omapdss_rfbi_set_interface_timings() to
configure the rfbi timings before the interface is enabled.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/displays/panel-n8x0.c |  1 +
 drivers/video/omap2/dss/rfbi.c            | 12 +++++++++---
 2 files changed, 10 insertions(+), 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-n8x0.c b/drivers/video/omap2/displays/panel-n8x0.c
index 3ffd987ad8b2..17ae85e0033f 100644
--- a/drivers/video/omap2/displays/panel-n8x0.c
+++ b/drivers/video/omap2/displays/panel-n8x0.c
@@ -307,6 +307,7 @@ static int n8x0_panel_power_on(struct omap_dss_device *dssdev)
 		dssdev->panel.timings.y_res);
 	omapdss_rfbi_set_pixel_size(dssdev, dssdev->ctrl.pixel_size);
 	omapdss_rfbi_set_data_lines(dssdev, dssdev->phy.rfbi.data_lines);
+	omapdss_rfbi_set_interface_timings(dssdev, &dssdev->ctrl.rfbi_timings);
 
 	r = omapdss_rfbi_display_enable(dssdev);
 	if (r)
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 698d5b92f8e2..5a9c0e9d8710 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -115,6 +115,7 @@ static struct {
 	struct omap_video_timings timings;
 	int pixel_size;
 	int data_lines;
+	struct rfbi_timings intf_timings;
 } rfbi;
 
 static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val)
@@ -799,6 +800,13 @@ void omapdss_rfbi_set_data_lines(struct omap_dss_device *dssdev, int data_lines)
 }
 EXPORT_SYMBOL(omapdss_rfbi_set_data_lines);
 
+void omapdss_rfbi_set_interface_timings(struct omap_dss_device *dssdev,
+		struct rfbi_timings *timings)
+{
+	rfbi.intf_timings = *timings;
+}
+EXPORT_SYMBOL(omapdss_rfbi_set_interface_timings);
+
 static void rfbi_dump_regs(struct seq_file *s)
 {
 #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r))
@@ -907,9 +915,7 @@ int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
 	rfbi_configure(dssdev->phy.rfbi.channel, rfbi.pixel_size,
 			rfbi.data_lines);
 
-	rfbi_set_timings(dssdev->phy.rfbi.channel,
-			 &dssdev->ctrl.rfbi_timings);
-
+	rfbi_set_timings(dssdev->phy.rfbi.channel, &rfbi.intf_timings);
 
 	return 0;
 err1:
-- 
cgit v1.2.1


From febe2905d08b238f4ee2eb7e99c402bf85f0f70f Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Thu, 16 Aug 2012 11:55:15 +0530
Subject: OMAPDSS: VENC: Maintain copy of venc type in driver data

The VENC driver currently relies on the omap_dss_device struct to configure the
venc type. This makes the VENC interface driver dependent on the omap_dss_device
struct.

Make the VENC driver data maintain it's own 'venc type' field. A panel driver
is expected to call omapdss_venc_set_type() before enabling the interface or
changing the type via display sysfs attributes.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dss.h        |  2 ++
 drivers/video/omap2/dss/venc.c       | 15 +++++++++++++--
 drivers/video/omap2/dss/venc_panel.c |  2 ++
 3 files changed, 17 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index f919dc8d94b8..c17d298b0474 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -477,6 +477,8 @@ int omapdss_venc_check_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings);
 u32 omapdss_venc_get_wss(struct omap_dss_device *dssdev);
 int omapdss_venc_set_wss(struct omap_dss_device *dssdev, u32 wss);
+void omapdss_venc_set_type(struct omap_dss_device *dssdev,
+		enum omap_dss_venc_type type);
 int venc_panel_init(void);
 void venc_panel_exit(void);
 
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index d96025e2ca7a..2d90fcf7e8f9 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -302,6 +302,7 @@ static struct {
 	struct clk	*tv_dac_clk;
 
 	struct omap_video_timings timings;
+	enum omap_dss_venc_type type;
 } venc;
 
 static inline void venc_write_reg(int idx, u32 val)
@@ -436,12 +437,12 @@ static int venc_power_on(struct omap_dss_device *dssdev)
 	venc_reset();
 	venc_write_config(venc_timings_to_config(&venc.timings));
 
-	dss_set_venc_output(dssdev->phy.venc.type);
+	dss_set_venc_output(venc.type);
 	dss_set_dac_pwrdn_bgz(1);
 
 	l = 0;
 
-	if (dssdev->phy.venc.type == OMAP_DSS_VENC_TYPE_COMPOSITE)
+	if (venc.type == OMAP_DSS_VENC_TYPE_COMPOSITE)
 		l |= 1 << 1;
 	else /* S-Video */
 		l |= (1 << 0) | (1 << 2);
@@ -628,6 +629,16 @@ err:
 	return r;
 }
 
+void omapdss_venc_set_type(struct omap_dss_device *dssdev,
+		enum omap_dss_venc_type type)
+{
+	mutex_lock(&venc.venc_lock);
+
+	venc.type = type;
+
+	mutex_unlock(&venc.venc_lock);
+}
+
 static int __init venc_init_display(struct omap_dss_device *dssdev)
 {
 	DSSDBG("init_display\n");
diff --git a/drivers/video/omap2/dss/venc_panel.c b/drivers/video/omap2/dss/venc_panel.c
index 80963697d384..ef213618a25c 100644
--- a/drivers/video/omap2/dss/venc_panel.c
+++ b/drivers/video/omap2/dss/venc_panel.c
@@ -68,6 +68,7 @@ static ssize_t display_output_type_store(struct device *dev,
 
 	if (dssdev->phy.venc.type != new_type) {
 		dssdev->phy.venc.type = new_type;
+		omapdss_venc_set_type(dssdev, new_type);
 		if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
 			omapdss_venc_display_disable(dssdev);
 			omapdss_venc_display_enable(dssdev);
@@ -128,6 +129,7 @@ static int venc_panel_enable(struct omap_dss_device *dssdev)
 	}
 
 	omapdss_venc_set_timings(dssdev, &dssdev->panel.timings);
+	omapdss_venc_set_type(dssdev, dssdev->phy.venc.type);
 
 	r = omapdss_venc_display_enable(dssdev);
 	if (r)
-- 
cgit v1.2.1


From 89e7195634e563b72288bf13ef4dbdf4709d2d08 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Thu, 16 Aug 2012 11:56:31 +0530
Subject: OMAPDSS: VENC: Maintian copy of video output polarity info in private
 data

The VENC driver currently relies on the omap_dss_device struct to configure the
video output polarity. This makes the VENC interface driver dependent on the
omap_dss_device struct.

Make the VENC driver data maintain it's own polarity field. A panel driver
is expected to call omapdss_venc_invert_vid_out_polarity() before enabling the
interface.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dss.h        |  2 ++
 drivers/video/omap2/dss/venc.c       | 13 ++++++++++++-
 drivers/video/omap2/dss/venc_panel.c |  2 ++
 3 files changed, 16 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index c17d298b0474..41c00dc63cc5 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -479,6 +479,8 @@ u32 omapdss_venc_get_wss(struct omap_dss_device *dssdev);
 int omapdss_venc_set_wss(struct omap_dss_device *dssdev, u32 wss);
 void omapdss_venc_set_type(struct omap_dss_device *dssdev,
 		enum omap_dss_venc_type type);
+void omapdss_venc_invert_vid_out_polarity(struct omap_dss_device *dssdev,
+		bool invert_polarity);
 int venc_panel_init(void);
 void venc_panel_exit(void);
 
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 2d90fcf7e8f9..7d3eef8a010f 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -303,6 +303,7 @@ static struct {
 
 	struct omap_video_timings timings;
 	enum omap_dss_venc_type type;
+	bool invert_polarity;
 } venc;
 
 static inline void venc_write_reg(int idx, u32 val)
@@ -447,7 +448,7 @@ static int venc_power_on(struct omap_dss_device *dssdev)
 	else /* S-Video */
 		l |= (1 << 0) | (1 << 2);
 
-	if (dssdev->phy.venc.invert_polarity == false)
+	if (venc.invert_polarity == false)
 		l |= 1 << 3;
 
 	venc_write_reg(VENC_OUTPUT_CONTROL, l);
@@ -639,6 +640,16 @@ void omapdss_venc_set_type(struct omap_dss_device *dssdev,
 	mutex_unlock(&venc.venc_lock);
 }
 
+void omapdss_venc_invert_vid_out_polarity(struct omap_dss_device *dssdev,
+		bool invert_polarity)
+{
+	mutex_lock(&venc.venc_lock);
+
+	venc.invert_polarity = invert_polarity;
+
+	mutex_unlock(&venc.venc_lock);
+}
+
 static int __init venc_init_display(struct omap_dss_device *dssdev)
 {
 	DSSDBG("init_display\n");
diff --git a/drivers/video/omap2/dss/venc_panel.c b/drivers/video/omap2/dss/venc_panel.c
index ef213618a25c..d55b8784ecfd 100644
--- a/drivers/video/omap2/dss/venc_panel.c
+++ b/drivers/video/omap2/dss/venc_panel.c
@@ -130,6 +130,8 @@ static int venc_panel_enable(struct omap_dss_device *dssdev)
 
 	omapdss_venc_set_timings(dssdev, &dssdev->panel.timings);
 	omapdss_venc_set_type(dssdev, dssdev->phy.venc.type);
+	omapdss_venc_invert_vid_out_polarity(dssdev,
+		dssdev->phy.venc.invert_polarity);
 
 	r = omapdss_venc_display_enable(dssdev);
 	if (r)
-- 
cgit v1.2.1


From 0b3d9cfe7d6ac9cedd2ddbb6f3415980b3cfc36e Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 22 Aug 2012 11:33:32 +0300
Subject: OMAPDSS: HDMI: fix initial HDMI enable

Commit 7849398fa28c21dad24292b838b059a862f99f16 introduced a bug,
causing the following error to be reported:

[  370.827819] cannot lock PLL
[  370.830749] CFG1 0x1e
[  370.833160] CFG2 0x602004
[  370.835876] CFG4 0x40000
[  370.838562] omapdss HDMI: Failed to lock PLL

However, HDMI output is still enabled.

The problem is that we enable the HDMI video output temporarily when
reading EDID or detecting if a HDMI cable is connected (ugh), and the
commit above changes the behavior of the driver so that the video
timings are not yet configured at the point when EDID is read.

This patch fixes the problem by configuring the initial VGA timings at
HDMI probe.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/hdmi_panel.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi_panel.c b/drivers/video/omap2/dss/hdmi_panel.c
index 2feb2cdfb60f..69fb115bab32 100644
--- a/drivers/video/omap2/dss/hdmi_panel.c
+++ b/drivers/video/omap2/dss/hdmi_panel.c
@@ -67,6 +67,8 @@ static int hdmi_panel_probe(struct omap_dss_device *dssdev)
 		dssdev->panel.timings.x_res,
 		dssdev->panel.timings.y_res);
 
+	omapdss_hdmi_display_set_timing(dssdev, &dssdev->panel.timings);
+
 	return 0;
 }
 
-- 
cgit v1.2.1


From dcbe765b4f7c097ceab7dabe3af29e2a02529ebf Mon Sep 17 00:00:00 2001
From: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Date: Tue, 3 Jul 2012 12:26:51 +0530
Subject: OMAPDSS: DISPC: Cleanup cpu_is_xxxx checks

All the cpu_is checks have been moved to dispc_init_features function providing
a much more generic and cleaner interface. The OMAP version and revision
specific functions and data are initialized by dispc_features structure which is
local to dispc.c.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 434 ++++++++++++++++++++++++++--------------
 1 file changed, 279 insertions(+), 155 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index ff52702dfd2f..0de9a7efcbc4 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -81,6 +81,23 @@ struct dispc_irq_stats {
 	unsigned irqs[32];
 };
 
+struct dispc_features {
+	u8 sw_start;
+	u8 fp_start;
+	u8 bp_start;
+	u16 sw_max;
+	u16 vp_max;
+	u16 hp_max;
+	int (*calc_scaling) (enum omap_channel channel,
+		const struct omap_video_timings *mgr_timings,
+		u16 width, u16 height, u16 out_width, u16 out_height,
+		enum omap_color_mode color_mode, bool *five_taps,
+		int *x_predecim, int *y_predecim, int *decim_x, int *decim_y,
+		u16 pos_x, unsigned long *core_clk);
+	unsigned long (*calc_core_clk) (enum omap_channel channel,
+		u16 width, u16 height, u16 out_width, u16 out_height);
+};
+
 static struct {
 	struct platform_device *pdev;
 	void __iomem    *base;
@@ -101,6 +118,8 @@ static struct {
 	bool		ctx_valid;
 	u32		ctx[DISPC_SZ_REGS / sizeof(u32)];
 
+	const struct dispc_features *feat;
+
 #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
 	spinlock_t irq_stats_lock;
 	struct dispc_irq_stats irq_stats;
@@ -1939,7 +1958,18 @@ static unsigned long calc_core_clk_five_taps(enum omap_channel channel,
 	return core_clk;
 }
 
-static unsigned long calc_core_clk(enum omap_channel channel, u16 width,
+static unsigned long calc_core_clk_24xx(enum omap_channel channel, u16 width,
+		u16 height, u16 out_width, u16 out_height)
+{
+	unsigned long pclk = dispc_mgr_pclk_rate(channel);
+
+	if (height > out_height && width > out_width)
+		return pclk * 4;
+	else
+		return pclk * 2;
+}
+
+static unsigned long calc_core_clk_34xx(enum omap_channel channel, u16 width,
 		u16 height, u16 out_width, u16 out_height)
 {
 	unsigned int hf, vf;
@@ -1958,25 +1988,163 @@ static unsigned long calc_core_clk(enum omap_channel channel, u16 width,
 		hf = 2;
 	else
 		hf = 1;
-
 	if (height > out_height)
 		vf = 2;
 	else
 		vf = 1;
 
-	if (cpu_is_omap24xx()) {
-		if (vf > 1 && hf > 1)
-			return pclk * 4;
-		else
-			return pclk * 2;
-	} else if (cpu_is_omap34xx()) {
-		return pclk * vf * hf;
-	} else {
-		if (hf > 1)
-			return DIV_ROUND_UP(pclk, out_width) * width;
-		else
-			return pclk;
+	return pclk * vf * hf;
+}
+
+static unsigned long calc_core_clk_44xx(enum omap_channel channel, u16 width,
+		u16 height, u16 out_width, u16 out_height)
+{
+	unsigned long pclk = dispc_mgr_pclk_rate(channel);
+
+	if (width > out_width)
+		return DIV_ROUND_UP(pclk, out_width) * width;
+	else
+		return pclk;
+}
+
+static int dispc_ovl_calc_scaling_24xx(enum omap_channel channel,
+		const struct omap_video_timings *mgr_timings,
+		u16 width, u16 height, u16 out_width, u16 out_height,
+		enum omap_color_mode color_mode, bool *five_taps,
+		int *x_predecim, int *y_predecim, int *decim_x, int *decim_y,
+		u16 pos_x, unsigned long *core_clk)
+{
+	int error;
+	u16 in_width, in_height;
+	int min_factor = min(*decim_x, *decim_y);
+	const int maxsinglelinewidth =
+			dss_feat_get_param_max(FEAT_PARAM_LINEWIDTH);
+	*five_taps = false;
+
+	do {
+		in_height = DIV_ROUND_UP(height, *decim_y);
+		in_width = DIV_ROUND_UP(width, *decim_x);
+		*core_clk = dispc.feat->calc_core_clk(channel, in_width,
+				in_height, out_width, out_height);
+		error = (in_width > maxsinglelinewidth || !*core_clk ||
+			*core_clk > dispc_core_clk_rate());
+		if (error) {
+			if (*decim_x == *decim_y) {
+				*decim_x = min_factor;
+				++*decim_y;
+			} else {
+				swap(*decim_x, *decim_y);
+				if (*decim_x < *decim_y)
+					++*decim_x;
+			}
+		}
+	} while (*decim_x <= *x_predecim && *decim_y <= *y_predecim && error);
+
+	if (in_width > maxsinglelinewidth) {
+		DSSERR("Cannot scale max input width exceeded");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int dispc_ovl_calc_scaling_34xx(enum omap_channel channel,
+		const struct omap_video_timings *mgr_timings,
+		u16 width, u16 height, u16 out_width, u16 out_height,
+		enum omap_color_mode color_mode, bool *five_taps,
+		int *x_predecim, int *y_predecim, int *decim_x, int *decim_y,
+		u16 pos_x, unsigned long *core_clk)
+{
+	int error;
+	u16 in_width, in_height;
+	int min_factor = min(*decim_x, *decim_y);
+	const int maxsinglelinewidth =
+			dss_feat_get_param_max(FEAT_PARAM_LINEWIDTH);
+
+	do {
+		in_height = DIV_ROUND_UP(height, *decim_y);
+		in_width = DIV_ROUND_UP(width, *decim_x);
+		*core_clk = calc_core_clk_five_taps(channel, mgr_timings,
+			in_width, in_height, out_width, out_height, color_mode);
+
+		error = check_horiz_timing_omap3(channel, mgr_timings, pos_x,
+			in_width, in_height, out_width, out_height);
+
+		if (in_width > maxsinglelinewidth)
+			if (in_height > out_height &&
+						in_height < out_height * 2)
+				*five_taps = false;
+		if (!*five_taps)
+			*core_clk = dispc.feat->calc_core_clk(channel, in_width,
+					in_height, out_width, out_height);
+
+		error = (error || in_width > maxsinglelinewidth * 2 ||
+			(in_width > maxsinglelinewidth && *five_taps) ||
+			!*core_clk || *core_clk > dispc_core_clk_rate());
+		if (error) {
+			if (*decim_x == *decim_y) {
+				*decim_x = min_factor;
+				++*decim_y;
+			} else {
+				swap(*decim_x, *decim_y);
+				if (*decim_x < *decim_y)
+					++*decim_x;
+			}
+		}
+	} while (*decim_x <= *x_predecim && *decim_y <= *y_predecim && error);
+
+	if (check_horiz_timing_omap3(channel, mgr_timings, pos_x, width, height,
+		out_width, out_height)){
+			DSSERR("horizontal timing too tight\n");
+			return -EINVAL;
+	}
+
+	if (in_width > (maxsinglelinewidth * 2)) {
+		DSSERR("Cannot setup scaling");
+		DSSERR("width exceeds maximum width possible");
+		return -EINVAL;
+	}
+
+	if (in_width > maxsinglelinewidth && *five_taps) {
+		DSSERR("cannot setup scaling with five taps");
+		return -EINVAL;
 	}
+	return 0;
+}
+
+static int dispc_ovl_calc_scaling_44xx(enum omap_channel channel,
+		const struct omap_video_timings *mgr_timings,
+		u16 width, u16 height, u16 out_width, u16 out_height,
+		enum omap_color_mode color_mode, bool *five_taps,
+		int *x_predecim, int *y_predecim, int *decim_x, int *decim_y,
+		u16 pos_x, unsigned long *core_clk)
+{
+	u16 in_width, in_width_max;
+	int decim_x_min = *decim_x;
+	u16 in_height = DIV_ROUND_UP(height, *decim_y);
+	const int maxsinglelinewidth =
+				dss_feat_get_param_max(FEAT_PARAM_LINEWIDTH);
+
+	in_width_max = dispc_core_clk_rate() /
+			DIV_ROUND_UP(dispc_mgr_pclk_rate(channel), out_width);
+	*decim_x = DIV_ROUND_UP(width, in_width_max);
+
+	*decim_x = *decim_x > decim_x_min ? *decim_x : decim_x_min;
+	if (*decim_x > *x_predecim)
+		return -EINVAL;
+
+	do {
+		in_width = DIV_ROUND_UP(width, *decim_x);
+	} while (*decim_x <= *x_predecim &&
+			in_width > maxsinglelinewidth && ++*decim_x);
+
+	if (in_width > maxsinglelinewidth) {
+		DSSERR("Cannot scale width exceeds max line width");
+		return -EINVAL;
+	}
+
+	*core_clk = dispc.feat->calc_core_clk(channel, in_width, in_height,
+				out_width, out_height);
+	return 0;
 }
 
 static int dispc_ovl_calc_scaling(enum omap_plane plane,
@@ -1988,12 +2156,9 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 {
 	struct omap_overlay *ovl = omap_dss_get_overlay(plane);
 	const int maxdownscale = dss_feat_get_param_max(FEAT_PARAM_DOWNSCALE);
-	const int maxsinglelinewidth =
-				dss_feat_get_param_max(FEAT_PARAM_LINEWIDTH);
 	const int max_decim_limit = 16;
 	unsigned long core_clk = 0;
-	int decim_x, decim_y, error, min_factor;
-	u16 in_width, in_height, in_width_max = 0;
+	int decim_x, decim_y, ret;
 
 	if (width == out_width && height == out_height)
 		return 0;
@@ -2017,118 +2182,17 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 	decim_x = DIV_ROUND_UP(DIV_ROUND_UP(width, out_width), maxdownscale);
 	decim_y = DIV_ROUND_UP(DIV_ROUND_UP(height, out_height), maxdownscale);
 
-	min_factor = min(decim_x, decim_y);
-
 	if (decim_x > *x_predecim || out_width > width * 8)
 		return -EINVAL;
 
 	if (decim_y > *y_predecim || out_height > height * 8)
 		return -EINVAL;
 
-	if (cpu_is_omap24xx()) {
-		*five_taps = false;
-
-		do {
-			in_height = DIV_ROUND_UP(height, decim_y);
-			in_width = DIV_ROUND_UP(width, decim_x);
-			core_clk = calc_core_clk(channel, in_width, in_height,
-					out_width, out_height);
-			error = (in_width > maxsinglelinewidth || !core_clk ||
-				core_clk > dispc_core_clk_rate());
-			if (error) {
-				if (decim_x == decim_y) {
-					decim_x = min_factor;
-					decim_y++;
-				} else {
-					swap(decim_x, decim_y);
-					if (decim_x < decim_y)
-						decim_x++;
-				}
-			}
-		} while (decim_x <= *x_predecim && decim_y <= *y_predecim &&
-				error);
-
-		if (in_width > maxsinglelinewidth) {
-			DSSERR("Cannot scale max input width exceeded");
-			return -EINVAL;
-		}
-	} else if (cpu_is_omap34xx()) {
-
-		do {
-			in_height = DIV_ROUND_UP(height, decim_y);
-			in_width = DIV_ROUND_UP(width, decim_x);
-			core_clk = calc_core_clk_five_taps(channel, mgr_timings,
-				in_width, in_height, out_width, out_height,
-				color_mode);
-
-			error = check_horiz_timing_omap3(channel, mgr_timings,
-				pos_x, in_width, in_height, out_width,
-				out_height);
-
-			if (in_width > maxsinglelinewidth)
-				if (in_height > out_height &&
-					in_height < out_height * 2)
-					*five_taps = false;
-			if (!*five_taps)
-				core_clk = calc_core_clk(channel, in_width,
-					in_height, out_width, out_height);
-			error = (error || in_width > maxsinglelinewidth * 2 ||
-				(in_width > maxsinglelinewidth && *five_taps) ||
-				!core_clk || core_clk > dispc_core_clk_rate());
-			if (error) {
-				if (decim_x == decim_y) {
-					decim_x = min_factor;
-					decim_y++;
-				} else {
-					swap(decim_x, decim_y);
-					if (decim_x < decim_y)
-						decim_x++;
-				}
-			}
-		} while (decim_x <= *x_predecim && decim_y <= *y_predecim
-			&& error);
-
-		if (check_horiz_timing_omap3(channel, mgr_timings, pos_x, width,
-			height, out_width, out_height)){
-				DSSERR("horizontal timing too tight\n");
-				return -EINVAL;
-		}
-
-		if (in_width > (maxsinglelinewidth * 2)) {
-			DSSERR("Cannot setup scaling");
-			DSSERR("width exceeds maximum width possible");
-			return -EINVAL;
-		}
-
-		if (in_width > maxsinglelinewidth && *five_taps) {
-			DSSERR("cannot setup scaling with five taps");
-			return -EINVAL;
-		}
-	} else {
-		int decim_x_min = decim_x;
-		in_height = DIV_ROUND_UP(height, decim_y);
-		in_width_max = dispc_core_clk_rate() /
-				DIV_ROUND_UP(dispc_mgr_pclk_rate(channel),
-						out_width);
-		decim_x = DIV_ROUND_UP(width, in_width_max);
-
-		decim_x = decim_x > decim_x_min ? decim_x : decim_x_min;
-		if (decim_x > *x_predecim)
-			return -EINVAL;
-
-		do {
-			in_width = DIV_ROUND_UP(width, decim_x);
-		} while (decim_x <= *x_predecim &&
-				in_width > maxsinglelinewidth && decim_x++);
-
-		if (in_width > maxsinglelinewidth) {
-			DSSERR("Cannot scale width exceeds max line width");
-			return -EINVAL;
-		}
-
-		core_clk = calc_core_clk(channel, in_width, in_height,
-				out_width, out_height);
-	}
+	ret = dispc.feat->calc_scaling(channel, mgr_timings, width, height,
+		out_width, out_height, color_mode, five_taps, x_predecim,
+		y_predecim, &decim_x, &decim_y, pos_x, &core_clk);
+	if (ret)
+		return ret;
 
 	DSSDBG("required core clk rate = %lu Hz\n", core_clk);
 	DSSDBG("current core clk rate = %lu Hz\n", dispc_core_clk_rate());
@@ -2604,24 +2668,13 @@ static bool _dispc_mgr_size_ok(u16 width, u16 height)
 static bool _dispc_lcd_timings_ok(int hsw, int hfp, int hbp,
 		int vsw, int vfp, int vbp)
 {
-	if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) {
-		if (hsw < 1 || hsw > 64 ||
-				hfp < 1 || hfp > 256 ||
-				hbp < 1 || hbp > 256 ||
-				vsw < 1 || vsw > 64 ||
-				vfp < 0 || vfp > 255 ||
-				vbp < 0 || vbp > 255)
-			return false;
-	} else {
-		if (hsw < 1 || hsw > 256 ||
-				hfp < 1 || hfp > 4096 ||
-				hbp < 1 || hbp > 4096 ||
-				vsw < 1 || vsw > 256 ||
-				vfp < 0 || vfp > 4095 ||
-				vbp < 0 || vbp > 4095)
-			return false;
-	}
-
+	if (hsw < 1 || hsw > dispc.feat->sw_max ||
+			hfp < 1 || hfp > dispc.feat->hp_max ||
+			hbp < 1 || hbp > dispc.feat->hp_max ||
+			vsw < 1 || vsw > dispc.feat->sw_max ||
+			vfp < 0 || vfp > dispc.feat->vp_max ||
+			vbp < 0 || vbp > dispc.feat->vp_max)
+		return false;
 	return true;
 }
 
@@ -2653,19 +2706,12 @@ static void _dispc_mgr_set_lcd_timings(enum omap_channel channel, int hsw,
 	u32 timing_h, timing_v, l;
 	bool onoff, rf, ipc;
 
-	if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) {
-		timing_h = FLD_VAL(hsw-1, 5, 0) | FLD_VAL(hfp-1, 15, 8) |
-			FLD_VAL(hbp-1, 27, 20);
-
-		timing_v = FLD_VAL(vsw-1, 5, 0) | FLD_VAL(vfp, 15, 8) |
-			FLD_VAL(vbp, 27, 20);
-	} else {
-		timing_h = FLD_VAL(hsw-1, 7, 0) | FLD_VAL(hfp-1, 19, 8) |
-			FLD_VAL(hbp-1, 31, 20);
-
-		timing_v = FLD_VAL(vsw-1, 7, 0) | FLD_VAL(vfp, 19, 8) |
-			FLD_VAL(vbp, 31, 20);
-	}
+	timing_h = FLD_VAL(hsw-1, dispc.feat->sw_start, 0) |
+			FLD_VAL(hfp-1, dispc.feat->fp_start, 8) |
+			FLD_VAL(hbp-1, dispc.feat->bp_start, 20);
+	timing_v = FLD_VAL(vsw-1, dispc.feat->sw_start, 0) |
+			FLD_VAL(vfp, dispc.feat->fp_start, 8) |
+			FLD_VAL(vbp, dispc.feat->bp_start, 20);
 
 	dispc_write_reg(DISPC_TIMING_H(channel), timing_h);
 	dispc_write_reg(DISPC_TIMING_V(channel), timing_v);
@@ -3671,6 +3717,80 @@ static void _omap_dispc_initial_config(void)
 	dispc_ovl_enable_zorder_planes();
 }
 
+static const struct dispc_features omap24xx_dispc_feats __initconst = {
+	.sw_start		=	5,
+	.fp_start		=	15,
+	.bp_start		=	27,
+	.sw_max			=	64,
+	.vp_max			=	255,
+	.hp_max			=	256,
+	.calc_scaling		=	dispc_ovl_calc_scaling_24xx,
+	.calc_core_clk		=	calc_core_clk_24xx,
+};
+
+static const struct dispc_features omap34xx_rev1_0_dispc_feats __initconst = {
+	.sw_start		=	5,
+	.fp_start		=	15,
+	.bp_start		=	27,
+	.sw_max			=	64,
+	.vp_max			=	255,
+	.hp_max			=	256,
+	.calc_scaling		=	dispc_ovl_calc_scaling_34xx,
+	.calc_core_clk		=	calc_core_clk_34xx,
+};
+
+static const struct dispc_features omap34xx_rev3_0_dispc_feats __initconst = {
+	.sw_start		=	7,
+	.fp_start		=	19,
+	.bp_start		=	31,
+	.sw_max			=	256,
+	.vp_max			=	4095,
+	.hp_max			=	4096,
+	.calc_scaling		=	dispc_ovl_calc_scaling_34xx,
+	.calc_core_clk		=	calc_core_clk_34xx,
+};
+
+static const struct dispc_features omap44xx_dispc_feats __initconst = {
+	.sw_start		=	7,
+	.fp_start		=	19,
+	.bp_start		=	31,
+	.sw_max			=	256,
+	.vp_max			=	4095,
+	.hp_max			=	4096,
+	.calc_scaling		=	dispc_ovl_calc_scaling_44xx,
+	.calc_core_clk		=	calc_core_clk_44xx,
+};
+
+static int __init dispc_init_features(struct device *dev)
+{
+	const struct dispc_features *src;
+	struct dispc_features *dst;
+
+	dst = devm_kzalloc(dev, sizeof(*dst), GFP_KERNEL);
+	if (!dst) {
+		dev_err(dev, "Failed to allocate DISPC Features\n");
+		return -ENOMEM;
+	}
+
+	if (cpu_is_omap24xx()) {
+		src = &omap24xx_dispc_feats;
+	} else if (cpu_is_omap34xx()) {
+		if (omap_rev() < OMAP3430_REV_ES3_0)
+			src = &omap34xx_rev1_0_dispc_feats;
+		else
+			src = &omap34xx_rev3_0_dispc_feats;
+	} else if (cpu_is_omap44xx()) {
+		src = &omap44xx_dispc_feats;
+	} else {
+		return -ENODEV;
+	}
+
+	memcpy(dst, src, sizeof(*dst));
+	dispc.feat = dst;
+
+	return 0;
+}
+
 /* DISPC HW IP initialisation */
 static int __init omap_dispchw_probe(struct platform_device *pdev)
 {
@@ -3681,6 +3801,10 @@ static int __init omap_dispchw_probe(struct platform_device *pdev)
 
 	dispc.pdev = pdev;
 
+	r = dispc_init_features(&dispc.pdev->dev);
+	if (r)
+		return r;
+
 	spin_lock_init(&dispc.irq_lock);
 
 #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
-- 
cgit v1.2.1


From ba1bc5bb1da5151f94031909ff775b0b4a1871c1 Mon Sep 17 00:00:00 2001
From: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Date: Tue, 10 Jul 2012 12:27:21 +0530
Subject: OMAPDSS: DSS: Remove redundant functions

Functions dss_calc_clock_rates() and dss_get_clock_div() are removed as these
functions have become redundant and no longer used.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dss.c | 45 -------------------------------------------
 drivers/video/omap2/dss/dss.h |  2 --
 2 files changed, 47 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 92353be58036..e2e0fa453c66 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -431,31 +431,6 @@ enum omap_dss_clk_source dss_get_lcd_clk_source(enum omap_channel channel)
 	}
 }
 
-/* calculate clock rates using dividers in cinfo */
-int dss_calc_clock_rates(struct dss_clock_info *cinfo)
-{
-	if (dss.dpll4_m4_ck) {
-		unsigned long prate;
-		u16 fck_div_max = 16;
-
-		if (cpu_is_omap3630() || cpu_is_omap44xx())
-			fck_div_max = 32;
-
-		if (cinfo->fck_div > fck_div_max || cinfo->fck_div == 0)
-			return -EINVAL;
-
-		prate = clk_get_rate(clk_get_parent(dss.dpll4_m4_ck));
-
-		cinfo->fck = prate / cinfo->fck_div;
-	} else {
-		if (cinfo->fck_div != 0)
-			return -EINVAL;
-		cinfo->fck = clk_get_rate(dss.dss_clk);
-	}
-
-	return 0;
-}
-
 int dss_set_clock_div(struct dss_clock_info *cinfo)
 {
 	if (dss.dpll4_m4_ck) {
@@ -478,26 +453,6 @@ int dss_set_clock_div(struct dss_clock_info *cinfo)
 	return 0;
 }
 
-int dss_get_clock_div(struct dss_clock_info *cinfo)
-{
-	cinfo->fck = clk_get_rate(dss.dss_clk);
-
-	if (dss.dpll4_m4_ck) {
-		unsigned long prate;
-
-		prate = clk_get_rate(clk_get_parent(dss.dpll4_m4_ck));
-
-		if (cpu_is_omap3630() || cpu_is_omap44xx())
-			cinfo->fck_div = prate / (cinfo->fck);
-		else
-			cinfo->fck_div = prate / (cinfo->fck / 2);
-	} else {
-		cinfo->fck_div = 0;
-	}
-
-	return 0;
-}
-
 unsigned long dss_get_dpll4_rate(void)
 {
 	if (dss.dpll4_m4_ck)
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 41c00dc63cc5..d6cca820723c 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -296,9 +296,7 @@ void dss_set_venc_output(enum omap_dss_venc_type type);
 void dss_set_dac_pwrdn_bgz(bool enable);
 
 unsigned long dss_get_dpll4_rate(void);
-int dss_calc_clock_rates(struct dss_clock_info *cinfo);
 int dss_set_clock_div(struct dss_clock_info *cinfo);
-int dss_get_clock_div(struct dss_clock_info *cinfo);
 int dss_calc_clock_div(unsigned long req_pck, struct dss_clock_info *dss_cinfo,
 		struct dispc_clock_info *dispc_cinfo);
 
-- 
cgit v1.2.1


From 185bae1095188aa199c9be64d6030d8dbfc65e0a Mon Sep 17 00:00:00 2001
From: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Date: Wed, 11 Jul 2012 18:36:18 +0530
Subject: OMAPDSS: DSS: Cleanup cpu_is_xxxx checks

All the cpu_is checks have been moved to dss_init_features function providing a
much more generic and cleaner interface. The OMAP version and revision specific
initializations in various functions are cleaned and the necessary data are
moved to dss_features structure which is local to dss.c.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dss.c | 120 +++++++++++++++++++++++++++---------------
 1 file changed, 79 insertions(+), 41 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index e2e0fa453c66..31a553a6ee6f 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -31,6 +31,7 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/gfp.h>
 
 #include <video/omapdss.h>
 
@@ -65,6 +66,12 @@ struct dss_reg {
 static int dss_runtime_get(void);
 static void dss_runtime_put(void);
 
+struct dss_features {
+	u8 fck_div_max;
+	u8 dss_fck_multiplier;
+	const char *clk_name;
+};
+
 static struct {
 	struct platform_device *pdev;
 	void __iomem    *base;
@@ -83,6 +90,8 @@ static struct {
 
 	bool		ctx_valid;
 	u32		ctx[DSS_SZ_REGS / sizeof(u32)];
+
+	const struct dss_features *feat;
 } dss;
 
 static const char * const dss_generic_clk_source_names[] = {
@@ -91,6 +100,30 @@ static const char * const dss_generic_clk_source_names[] = {
 	[OMAP_DSS_CLK_SRC_FCK]			= "DSS_FCK",
 };
 
+static const struct dss_features omap24xx_dss_feats __initconst = {
+	.fck_div_max		=	16,
+	.dss_fck_multiplier	=	2,
+	.clk_name		=	NULL,
+};
+
+static const struct dss_features omap34xx_dss_feats __initconst = {
+	.fck_div_max		=	16,
+	.dss_fck_multiplier	=	2,
+	.clk_name		=	"dpll4_m4_ck",
+};
+
+static const struct dss_features omap3630_dss_feats __initconst = {
+	.fck_div_max		=	32,
+	.dss_fck_multiplier	=	1,
+	.clk_name		=	"dpll4_m4_ck",
+};
+
+static const struct dss_features omap44xx_dss_feats __initconst = {
+	.fck_div_max		=	32,
+	.dss_fck_multiplier	=	1,
+	.clk_name		=	"dpll_per_m5x2_ck",
+};
+
 static inline void dss_write_reg(const struct dss_reg idx, u32 val)
 {
 	__raw_writel(val, dss.base + idx.idx);
@@ -236,7 +269,6 @@ const char *dss_get_generic_clk_source_name(enum omap_dss_clk_source clk_src)
 	return dss_generic_clk_source_names[clk_src];
 }
 
-
 void dss_dump_clocks(struct seq_file *s)
 {
 	unsigned long dpll4_ck_rate;
@@ -259,18 +291,10 @@ void dss_dump_clocks(struct seq_file *s)
 
 		seq_printf(s, "dpll4_ck %lu\n", dpll4_ck_rate);
 
-		if (cpu_is_omap3630() || cpu_is_omap44xx())
-			seq_printf(s, "%s (%s) = %lu / %lu  = %lu\n",
-					fclk_name, fclk_real_name,
-					dpll4_ck_rate,
-					dpll4_ck_rate / dpll4_m4_ck_rate,
-					fclk_rate);
-		else
-			seq_printf(s, "%s (%s) = %lu / %lu * 2 = %lu\n",
-					fclk_name, fclk_real_name,
-					dpll4_ck_rate,
-					dpll4_ck_rate / dpll4_m4_ck_rate,
-					fclk_rate);
+		seq_printf(s, "%s (%s) = %lu / %lu * %d  = %lu\n",
+				fclk_name, fclk_real_name, dpll4_ck_rate,
+				dpll4_ck_rate / dpll4_m4_ck_rate,
+				dss.feat->dss_fck_multiplier, fclk_rate);
 	} else {
 		seq_printf(s, "%s (%s) = %lu\n",
 				fclk_name, fclk_real_name,
@@ -470,7 +494,7 @@ int dss_calc_clock_div(unsigned long req_pck, struct dss_clock_info *dss_cinfo,
 
 	unsigned long fck, max_dss_fck;
 
-	u16 fck_div, fck_div_max = 16;
+	u16 fck_div;
 
 	int match = 0;
 	int min_fck_per_pck;
@@ -480,9 +504,8 @@ int dss_calc_clock_div(unsigned long req_pck, struct dss_clock_info *dss_cinfo,
 	max_dss_fck = dss_feat_get_param_max(FEAT_PARAM_DSS_FCK);
 
 	fck = clk_get_rate(dss.dss_clk);
-	if (req_pck == dss.cache_req_pck &&
-			((cpu_is_omap34xx() && prate == dss.cache_prate) ||
-			 dss.cache_dss_cinfo.fck == fck)) {
+	if (req_pck == dss.cache_req_pck && prate == dss.cache_prate &&
+		dss.cache_dss_cinfo.fck == fck) {
 		DSSDBG("dispc clock info found from cache.\n");
 		*dss_cinfo = dss.cache_dss_cinfo;
 		*dispc_cinfo = dss.cache_dispc_cinfo;
@@ -519,16 +542,10 @@ retry:
 
 		goto found;
 	} else {
-		if (cpu_is_omap3630() || cpu_is_omap44xx())
-			fck_div_max = 32;
-
-		for (fck_div = fck_div_max; fck_div > 0; --fck_div) {
+		for (fck_div = dss.feat->fck_div_max; fck_div > 0; --fck_div) {
 			struct dispc_clock_info cur_dispc;
 
-			if (fck_div_max == 32)
-				fck = prate / fck_div;
-			else
-				fck = prate / fck_div * 2;
+			fck = prate / fck_div * dss.feat->dss_fck_multiplier;
 
 			if (fck > max_dss_fck)
 				continue;
@@ -645,22 +662,11 @@ static int dss_get_clocks(void)
 
 	dss.dss_clk = clk;
 
-	if (cpu_is_omap34xx()) {
-		clk = clk_get(NULL, "dpll4_m4_ck");
-		if (IS_ERR(clk)) {
-			DSSERR("Failed to get dpll4_m4_ck\n");
-			r = PTR_ERR(clk);
-			goto err;
-		}
-	} else if (cpu_is_omap44xx()) {
-		clk = clk_get(NULL, "dpll_per_m5x2_ck");
-		if (IS_ERR(clk)) {
-			DSSERR("Failed to get dpll_per_m5x2_ck\n");
-			r = PTR_ERR(clk);
-			goto err;
-		}
-	} else { /* omap24xx */
-		clk = NULL;
+	clk = clk_get(NULL, dss.feat->clk_name);
+	if (IS_ERR(clk)) {
+		DSSERR("Failed to get %s\n", dss.feat->clk_name);
+		r = PTR_ERR(clk);
+		goto err;
 	}
 
 	dss.dpll4_m4_ck = clk;
@@ -716,6 +722,34 @@ void dss_debug_dump_clocks(struct seq_file *s)
 }
 #endif
 
+static int __init dss_init_features(struct device *dev)
+{
+	const struct dss_features *src;
+	struct dss_features *dst;
+
+	dst = devm_kzalloc(dev, sizeof(*dst), GFP_KERNEL);
+	if (!dst) {
+		dev_err(dev, "Failed to allocate local DSS Features\n");
+		return -ENOMEM;
+	}
+
+	if (cpu_is_omap24xx())
+		src = &omap24xx_dss_feats;
+	else if (cpu_is_omap34xx())
+		src = &omap34xx_dss_feats;
+	else if (cpu_is_omap3630())
+		src = &omap3630_dss_feats;
+	else if (cpu_is_omap44xx())
+		src = &omap44xx_dss_feats;
+	else
+		return -ENODEV;
+
+	memcpy(dst, src, sizeof(*dst));
+	dss.feat = dst;
+
+	return 0;
+}
+
 /* DSS HW IP initialisation */
 static int __init omap_dsshw_probe(struct platform_device *pdev)
 {
@@ -725,6 +759,10 @@ static int __init omap_dsshw_probe(struct platform_device *pdev)
 
 	dss.pdev = pdev;
 
+	r = dss_init_features(&dss.pdev->dev);
+	if (r)
+		return r;
+
 	dss_mem = platform_get_resource(dss.pdev, IORESOURCE_MEM, 0);
 	if (!dss_mem) {
 		DSSERR("can't get IORESOURCE_MEM DSS\n");
-- 
cgit v1.2.1


From ee223b703033ccfc2a47c3bb3e7352b4f5828fd2 Mon Sep 17 00:00:00 2001
From: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Date: Wed, 1 Aug 2012 12:33:31 +0530
Subject: OMAPDSS: VENC: Remove cpu_is_xxxx checks

OMAP4 checks are removed from VENC to provide it a cleaner interface. These
checks were introduced by patches "HACK: OMAP: DSS2: VENC: disable VENC on OMAP4
to prevent crash" (ba02fa37de) by Tomi Valkeinen <tomi.valkeinen@ti.com> and
"OMAPDSS: VENC: fix NULL pointer dereference in DSS2 VENC sysfs debug attr on
OMAP4" (cc1d3e032d)  by Danny Kukawka <danny.kukawka@bisect.de> to prevent VENC
from crashing OMAP4 kernel.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/venc.c | 11 -----------
 1 file changed, 11 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 7d3eef8a010f..4a6caf9c6da3 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -674,11 +674,6 @@ static void venc_dump_regs(struct seq_file *s)
 {
 #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, venc_read_reg(r))
 
-	if (cpu_is_omap44xx()) {
-		seq_printf(s, "VENC currently disabled on OMAP44xx\n");
-		return;
-	}
-
 	if (venc_runtime_get())
 		return;
 
@@ -893,16 +888,10 @@ static struct platform_driver omap_venchw_driver = {
 
 int __init venc_init_platform_driver(void)
 {
-	if (cpu_is_omap44xx())
-		return 0;
-
 	return platform_driver_probe(&omap_venchw_driver, omap_venchw_probe);
 }
 
 void __exit venc_uninit_platform_driver(void)
 {
-	if (cpu_is_omap44xx())
-		return;
-
 	platform_driver_unregister(&omap_venchw_driver);
 }
-- 
cgit v1.2.1


From 195e672a76056478cc79f5c48343164c9237852e Mon Sep 17 00:00:00 2001
From: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Date: Wed, 22 Aug 2012 11:44:06 +0530
Subject: OMAPDSS: DPI: Remove cpu_is_xxxx checks

The OMAP3 checks have been removed and replaced by a dss feature
FEAT_DPI_USES_VDDS_DSI for cleaner implementation. The patches
"OMAP: DSS2: enable VDDS_DSI when using DPI" (8a2cfea8cc) by Tomi Valkeinen
<tomi.valkeinen@nokia.com> and "ARM: omap: fix oops in
drivers/video/omap2/dss/dpi.c" (4041071571) by Russell King
<rmk+kernel@arm.linux.org.uk> had introduced these checks. As it is evident
from these patches a dependency exists for some DSS pins on VDDS_DSI which is
better shown by dss feature FEAT_DPI_USES_VDDS_DSI.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dpi.c          | 12 +++++++-----
 drivers/video/omap2/dss/dss_features.c |  1 +
 drivers/video/omap2/dss/dss_features.h |  1 +
 3 files changed, 9 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index f260343e2451..25fb8953b80a 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -34,6 +34,7 @@
 #include <plat/cpu.h>
 
 #include "dss.h"
+#include "dss_features.h"
 
 static struct {
 	struct regulator *vdds_dsi_reg;
@@ -175,7 +176,7 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
 
 	mutex_lock(&dpi.lock);
 
-	if (cpu_is_omap34xx() && !dpi.vdds_dsi_reg) {
+	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI) && !dpi.vdds_dsi_reg) {
 		DSSERR("no VDSS_DSI regulator\n");
 		r = -ENODEV;
 		goto err_no_reg;
@@ -193,7 +194,7 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
 		goto err_start_dev;
 	}
 
-	if (cpu_is_omap34xx()) {
+	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI)) {
 		r = regulator_enable(dpi.vdds_dsi_reg);
 		if (r)
 			goto err_reg_enable;
@@ -239,7 +240,7 @@ err_dsi_pll_init:
 err_get_dsi:
 	dispc_runtime_put();
 err_get_dispc:
-	if (cpu_is_omap34xx())
+	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI))
 		regulator_disable(dpi.vdds_dsi_reg);
 err_reg_enable:
 	omap_dss_stop_device(dssdev);
@@ -265,7 +266,7 @@ void omapdss_dpi_display_disable(struct omap_dss_device *dssdev)
 
 	dispc_runtime_put();
 
-	if (cpu_is_omap34xx())
+	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI))
 		regulator_disable(dpi.vdds_dsi_reg);
 
 	omap_dss_stop_device(dssdev);
@@ -362,7 +363,8 @@ static int __init dpi_init_display(struct omap_dss_device *dssdev)
 {
 	DSSDBG("init_display\n");
 
-	if (cpu_is_omap34xx() && dpi.vdds_dsi_reg == NULL) {
+	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI) &&
+					dpi.vdds_dsi_reg == NULL) {
 		struct regulator *vdds_dsi;
 
 		vdds_dsi = dss_get_vdds_dsi();
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 938709724f0c..2fe39d65502f 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -373,6 +373,7 @@ static const enum dss_feat_id omap3430_dss_feat_list[] = {
 	FEAT_ALPHA_FIXED_ZORDER,
 	FEAT_FIFO_MERGE,
 	FEAT_OMAP3_DSI_FIFO_BUG,
+	FEAT_DPI_USES_VDDS_DSI,
 };
 
 static const enum dss_feat_id omap3630_dss_feat_list[] = {
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index 996ffcbfed58..26d43a4b9812 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -50,6 +50,7 @@ enum dss_feat_id {
 	FEAT_DSI_VC_OCP_WIDTH,
 	FEAT_DSI_REVERSE_TXCLKESC,
 	FEAT_DSI_GNQ,
+	FEAT_DPI_USES_VDDS_DSI,
 	FEAT_HDMI_CTS_SWMODE,
 	FEAT_HDMI_AUDIO_USE_MCLK,
 	FEAT_HANDLE_UV_SEPARATE,
-- 
cgit v1.2.1


From cca35017ca0dadae632ced71a11a7e0b7083af6c Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 26 Apr 2012 14:48:32 +0300
Subject: OMAPDSS: HDMI: Move GPIO handling to HDMI driver

We currently manage HDMI GPIOs in the board files via
platform_enable/disable calls. This won't work with device tree, and in
any case the correct place to manage the GPIOs is in the HDMI driver.

This patch moves the handling of the GPIOs to the HDMI driver. The GPIO
handling is moved to the common hdmi.c file, and this probably needs to
be revisited when adding OMAP5 HDMI support to see if the GPIO handling
needs to be moved to IP specific files.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/video/omap2/dss/hdmi.c | 75 +++++++++++++++++++++++++++++++-----------
 1 file changed, 55 insertions(+), 20 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 0cdf24673d48..4fbe27191de5 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -32,6 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/clk.h>
+#include <linux/gpio.h>
 #include <video/omapdss.h>
 
 #include "ti_hdmi.h"
@@ -61,6 +62,10 @@ static struct {
 	struct hdmi_ip_data ip_data;
 
 	struct clk *sys_clk;
+
+	int ct_cp_hpd_gpio;
+	int ls_oe_gpio;
+	int hpd_gpio;
 } hdmi;
 
 /*
@@ -314,12 +319,34 @@ static void hdmi_runtime_put(void)
 
 static int __init hdmi_init_display(struct omap_dss_device *dssdev)
 {
+	int r;
+
+	struct gpio gpios[] = {
+		{ hdmi.ct_cp_hpd_gpio, GPIOF_OUT_INIT_LOW, "hdmi_ct_cp_hpd" },
+		{ hdmi.ls_oe_gpio, GPIOF_OUT_INIT_LOW, "hdmi_ls_oe" },
+		{ hdmi.hpd_gpio, GPIOF_DIR_IN, "hdmi_hpd" },
+	};
+
 	DSSDBG("init_display\n");
 
 	dss_init_hdmi_ip_ops(&hdmi.ip_data);
+
+	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
+	if (r)
+		return r;
+
 	return 0;
 }
 
+static void __exit hdmi_uninit_display(struct omap_dss_device *dssdev)
+{
+	DSSDBG("uninit_display\n");
+
+	gpio_free(hdmi.ct_cp_hpd_gpio);
+	gpio_free(hdmi.ls_oe_gpio);
+	gpio_free(hdmi.hpd_gpio);
+}
+
 static const struct hdmi_config *hdmi_find_timing(
 					const struct hdmi_config *timings_arr,
 					int len)
@@ -462,9 +489,12 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 	struct omap_video_timings *p;
 	unsigned long phy;
 
+	gpio_set_value(hdmi.ct_cp_hpd_gpio, 1);
+	gpio_set_value(hdmi.ls_oe_gpio, 1);
+
 	r = hdmi_runtime_get();
 	if (r)
-		return r;
+		goto err_runtime_get;
 
 	dss_mgr_disable(dssdev->manager);
 
@@ -482,7 +512,7 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 	r = hdmi.ip_data.ops->pll_enable(&hdmi.ip_data);
 	if (r) {
 		DSSDBG("Failed to lock PLL\n");
-		goto err;
+		goto err_pll_enable;
 	}
 
 	r = hdmi.ip_data.ops->phy_enable(&hdmi.ip_data);
@@ -526,8 +556,11 @@ err_vid_enable:
 	hdmi.ip_data.ops->phy_disable(&hdmi.ip_data);
 err_phy_enable:
 	hdmi.ip_data.ops->pll_disable(&hdmi.ip_data);
-err:
+err_pll_enable:
 	hdmi_runtime_put();
+err_runtime_get:
+	gpio_set_value(hdmi.ct_cp_hpd_gpio, 0);
+	gpio_set_value(hdmi.ls_oe_gpio, 0);
 	return -EIO;
 }
 
@@ -539,6 +572,9 @@ static void hdmi_power_off(struct omap_dss_device *dssdev)
 	hdmi.ip_data.ops->phy_disable(&hdmi.ip_data);
 	hdmi.ip_data.ops->pll_disable(&hdmi.ip_data);
 	hdmi_runtime_put();
+
+	gpio_set_value(hdmi.ct_cp_hpd_gpio, 0);
+	gpio_set_value(hdmi.ls_oe_gpio, 0);
 }
 
 int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev,
@@ -637,7 +673,6 @@ bool omapdss_hdmi_detect(void)
 
 int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev)
 {
-	struct omap_dss_hdmi_data *priv = dssdev->data;
 	int r = 0;
 
 	DSSDBG("ENTER hdmi_display_enable\n");
@@ -650,7 +685,7 @@ int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev)
 		goto err0;
 	}
 
-	hdmi.ip_data.hpd_gpio = priv->hpd_gpio;
+	hdmi.ip_data.hpd_gpio = hdmi.hpd_gpio;
 
 	r = omap_dss_start_device(dssdev);
 	if (r) {
@@ -658,26 +693,15 @@ int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev)
 		goto err0;
 	}
 
-	if (dssdev->platform_enable) {
-		r = dssdev->platform_enable(dssdev);
-		if (r) {
-			DSSERR("failed to enable GPIO's\n");
-			goto err1;
-		}
-	}
-
 	r = hdmi_power_on(dssdev);
 	if (r) {
 		DSSERR("failed to power on device\n");
-		goto err2;
+		goto err1;
 	}
 
 	mutex_unlock(&hdmi.lock);
 	return 0;
 
-err2:
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
 err1:
 	omap_dss_stop_device(dssdev);
 err0:
@@ -693,9 +717,6 @@ void omapdss_hdmi_display_disable(struct omap_dss_device *dssdev)
 
 	hdmi_power_off(dssdev);
 
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
-
 	omap_dss_stop_device(dssdev);
 
 	mutex_unlock(&hdmi.lock);
@@ -873,10 +894,15 @@ static void __init hdmi_probe_pdata(struct platform_device *pdev)
 
 	for (i = 0; i < pdata->num_devices; ++i) {
 		struct omap_dss_device *dssdev = pdata->devices[i];
+		struct omap_dss_hdmi_data *priv = dssdev->data;
 
 		if (dssdev->type != OMAP_DISPLAY_TYPE_HDMI)
 			continue;
 
+		hdmi.ct_cp_hpd_gpio = priv->ct_cp_hpd_gpio;
+		hdmi.ls_oe_gpio = priv->ls_oe_gpio;
+		hdmi.hpd_gpio = priv->hpd_gpio;
+
 		r = hdmi_init_display(dssdev);
 		if (r) {
 			DSSERR("device %s init failed: %d\n", dssdev->name, r);
@@ -938,8 +964,17 @@ static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static int __exit hdmi_remove_child(struct device *dev, void *data)
+{
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	hdmi_uninit_display(dssdev);
+	return 0;
+}
+
 static int __exit omapdss_hdmihw_remove(struct platform_device *pdev)
 {
+	device_for_each_child(&pdev->dev, NULL, hdmi_remove_child);
+
 	omap_dss_unregister_child_devices(&pdev->dev);
 
 	hdmi_panel_exit();
-- 
cgit v1.2.1


From a84b20654bb5711b45cf28bf5342143ce8652e72 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 26 Apr 2012 14:58:41 +0300
Subject: OMAPDSS: HDMI: Add delay to wait for 5V power

TPD12S015A spec says to wait 300us after setting CT_CP_HPD gpio for the
5V power output to reach 90% of the voltage. This patch adds the delay
to the driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/hdmi.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 4fbe27191de5..96a6e298873b 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -492,6 +492,9 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 	gpio_set_value(hdmi.ct_cp_hpd_gpio, 1);
 	gpio_set_value(hdmi.ls_oe_gpio, 1);
 
+	/* wait 300us after CT_CP_HPD for the 5V power output to reach 90% */
+	udelay(300);
+
 	r = hdmi_runtime_get();
 	if (r)
 		goto err_runtime_get;
-- 
cgit v1.2.1


From 174869435eaaf2bf253b6958331dbce632c3023b Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 15 Aug 2012 15:55:04 +0300
Subject: OMAPDSS: HDMI: use vdda_hdmi_dac

The HDMI driver requires vdda_hdmi_dac power for operation, but does not
enable it. This has worked because the regulator has been always
enabled.

But this may not always be the case, as I encountered when implementing
HDMI device tree support.

This patch changes the HDMI driver to use the vdda_hdmi_dac.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/hdmi.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 96a6e298873b..ccfc677c910a 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -33,6 +33,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
 #include <video/omapdss.h>
 
 #include "ti_hdmi.h"
@@ -62,6 +63,7 @@ static struct {
 	struct hdmi_ip_data ip_data;
 
 	struct clk *sys_clk;
+	struct regulator *vdda_hdmi_dac_reg;
 
 	int ct_cp_hpd_gpio;
 	int ls_oe_gpio;
@@ -331,6 +333,19 @@ static int __init hdmi_init_display(struct omap_dss_device *dssdev)
 
 	dss_init_hdmi_ip_ops(&hdmi.ip_data);
 
+	if (hdmi.vdda_hdmi_dac_reg == NULL) {
+		struct regulator *reg;
+
+		reg = devm_regulator_get(&hdmi.pdev->dev, "vdda_hdmi_dac");
+
+		if (IS_ERR(reg)) {
+			DSSERR("can't get VDDA_HDMI_DAC regulator\n");
+			return PTR_ERR(reg);
+		}
+
+		hdmi.vdda_hdmi_dac_reg = reg;
+	}
+
 	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
 	if (r)
 		return r;
@@ -495,6 +510,10 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 	/* wait 300us after CT_CP_HPD for the 5V power output to reach 90% */
 	udelay(300);
 
+	r = regulator_enable(hdmi.vdda_hdmi_dac_reg);
+	if (r)
+		goto err_vdac_enable;
+
 	r = hdmi_runtime_get();
 	if (r)
 		goto err_runtime_get;
@@ -562,6 +581,8 @@ err_phy_enable:
 err_pll_enable:
 	hdmi_runtime_put();
 err_runtime_get:
+	regulator_disable(hdmi.vdda_hdmi_dac_reg);
+err_vdac_enable:
 	gpio_set_value(hdmi.ct_cp_hpd_gpio, 0);
 	gpio_set_value(hdmi.ls_oe_gpio, 0);
 	return -EIO;
@@ -576,6 +597,8 @@ static void hdmi_power_off(struct omap_dss_device *dssdev)
 	hdmi.ip_data.ops->pll_disable(&hdmi.ip_data);
 	hdmi_runtime_put();
 
+	regulator_disable(hdmi.vdda_hdmi_dac_reg);
+
 	gpio_set_value(hdmi.ct_cp_hpd_gpio, 0);
 	gpio_set_value(hdmi.ls_oe_gpio, 0);
 }
-- 
cgit v1.2.1


From bc63f3044155fe90e76c9bb6dd2538b586ee02bc Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 16 Aug 2012 16:25:29 +0300
Subject: OMAPDSS: Add DSI fclk maximum to dss_features

Add max value of DSI functional clock to dss_features, so that DSI
driver can use it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dss_features.c | 2 ++
 drivers/video/omap2/dss/dss_features.h | 1 +
 2 files changed, 3 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 2fe39d65502f..c26fc1fb7dbc 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -326,6 +326,7 @@ static const struct dss_param_range omap3_dss_param_range[] = {
 	[FEAT_PARAM_DSIPLL_REGM_DSI]		= { 0, (1 << 4) - 1 },
 	[FEAT_PARAM_DSIPLL_FINT]		= { 750000, 2100000 },
 	[FEAT_PARAM_DSIPLL_LPDIV]		= { 1, (1 << 13) - 1},
+	[FEAT_PARAM_DSI_FCK]			= { 0, 173000000 },
 	[FEAT_PARAM_DOWNSCALE]			= { 1, 4 },
 	[FEAT_PARAM_LINEWIDTH]			= { 1, 1024 },
 	[FEAT_PARAM_MGR_WIDTH]			= { 1, 2048 },
@@ -341,6 +342,7 @@ static const struct dss_param_range omap4_dss_param_range[] = {
 	[FEAT_PARAM_DSIPLL_REGM_DSI]		= { 0, (1 << 5) - 1 },
 	[FEAT_PARAM_DSIPLL_FINT]		= { 500000, 2500000 },
 	[FEAT_PARAM_DSIPLL_LPDIV]		= { 0, (1 << 13) - 1 },
+	[FEAT_PARAM_DSI_FCK]			= { 0, 170000000 },
 	[FEAT_PARAM_DOWNSCALE]			= { 1, 4 },
 	[FEAT_PARAM_LINEWIDTH]			= { 1, 2048 },
 	[FEAT_PARAM_MGR_WIDTH]			= { 1, 2048 },
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index 26d43a4b9812..b81d603310a8 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -92,6 +92,7 @@ enum dss_range_param {
 	FEAT_PARAM_DSIPLL_REGM_DSI,
 	FEAT_PARAM_DSIPLL_FINT,
 	FEAT_PARAM_DSIPLL_LPDIV,
+	FEAT_PARAM_DSI_FCK,
 	FEAT_PARAM_DOWNSCALE,
 	FEAT_PARAM_LINEWIDTH,
 	FEAT_PARAM_MGR_WIDTH,
-- 
cgit v1.2.1


From ee144e645a081daad5de1ccac77f0a0e98e6a67b Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 10 Aug 2012 16:50:51 +0300
Subject: OMAPDSS: DSI: calculate dsi clock

Currently the way to configure clocks related to DSI (both DSI and DISPC
clocks) happens via omapdss platform data. The reason for this is that
configuring the DSS clocks is a very complex problem, and it's
impossible for the SW to know requirements about things like
interference.

However, for general cases it should be fine to calculate the dividers
for clocks in the SW. The calculated clocks are probably not perfect,
but should work.

This patch adds support to calculate the dividers when using DSI command
mode panels. The panel gives the required DDR clock rate and LP clock
rate, and the DSI driver configures itself and DISPC accordingly.

This patch is somewhat ugly, though. The code does its job by modifying
the platform data where the clock dividers would be if the board file
gave them. This is not how it's going to be in the future, but allows us
to have quite simple patch and keep the backward compatibility.

It also allows the developer to still give the exact dividers from the
board file when there's need for that, as long as the panel driver does
not override them.

There are also other areas for improvement. For example, it would be
better if the panel driver could ask for a DSI clock in a certain range,
as, at least command mode panels, the panel can work fine with many
different clock speeds.

While the patch is not perfect, it allows us to remove the hardcoded
clock dividers from the board file, making it easier to bring up a new
panel and to use device tree from omapdss.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-taal.c |   6 ++
 drivers/video/omap2/dss/dsi.c             | 126 ++++++++++++++++++++++++++++++
 2 files changed, 132 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 77aed0e51f9b..ddda96a52d06 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -1065,6 +1065,12 @@ static int taal_power_on(struct omap_dss_device *dssdev)
 	omapdss_dsi_set_pixel_format(dssdev, OMAP_DSS_DSI_FMT_RGB888);
 	omapdss_dsi_set_operation_mode(dssdev, OMAP_DSS_DSI_CMD_MODE);
 
+	r = omapdss_dsi_set_clocks(dssdev, 216000000, 10000000);
+	if (r) {
+		dev_err(&dssdev->dev, "failed to set HS and LP clocks\n");
+		goto err0;
+	}
+
 	r = omapdss_dsi_display_enable(dssdev);
 	if (r) {
 		dev_err(&dssdev->dev, "failed to enable DSI\n");
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 96d0024ada40..340c832d21d8 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1454,6 +1454,68 @@ found:
 	return 0;
 }
 
+static int dsi_pll_calc_ddrfreq(struct platform_device *dsidev,
+		unsigned long req_clk, struct dsi_clock_info *cinfo)
+{
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	struct dsi_clock_info cur, best;
+	unsigned long dss_sys_clk, max_dss_fck, max_dsi_fck;
+	unsigned long req_clkin4ddr;
+
+	DSSDBG("dsi_pll_calc_ddrfreq\n");
+
+	dss_sys_clk = clk_get_rate(dsi->sys_clk);
+
+	max_dss_fck = dss_feat_get_param_max(FEAT_PARAM_DSS_FCK);
+	max_dsi_fck = dss_feat_get_param_max(FEAT_PARAM_DSI_FCK);
+
+	memset(&best, 0, sizeof(best));
+	memset(&cur, 0, sizeof(cur));
+
+	cur.clkin = dss_sys_clk;
+
+	req_clkin4ddr = req_clk * 4;
+
+	for (cur.regn = 1; cur.regn < dsi->regn_max; ++cur.regn) {
+		cur.fint = cur.clkin / cur.regn;
+
+		if (cur.fint > dsi->fint_max || cur.fint < dsi->fint_min)
+			continue;
+
+		/* DSIPHY(MHz) = (2 * regm / regn) * clkin */
+		for (cur.regm = 1; cur.regm < dsi->regm_max; ++cur.regm) {
+			unsigned long a, b;
+
+			a = 2 * cur.regm * (cur.clkin/1000);
+			b = cur.regn;
+			cur.clkin4ddr = a / b * 1000;
+
+			if (cur.clkin4ddr > 1800 * 1000 * 1000)
+				break;
+
+			if (abs(cur.clkin4ddr - req_clkin4ddr) <
+					abs(best.clkin4ddr - req_clkin4ddr)) {
+				best = cur;
+				DSSDBG("best %ld\n", best.clkin4ddr);
+			}
+
+			if (cur.clkin4ddr == req_clkin4ddr)
+				goto found;
+		}
+	}
+found:
+	best.regm_dispc = DIV_ROUND_UP(best.clkin4ddr, max_dss_fck);
+	best.dsi_pll_hsdiv_dispc_clk = best.clkin4ddr / best.regm_dispc;
+
+	best.regm_dsi = DIV_ROUND_UP(best.clkin4ddr, max_dsi_fck);
+	best.dsi_pll_hsdiv_dsi_clk = best.clkin4ddr / best.regm_dsi;
+
+	if (cinfo)
+		*cinfo = best;
+
+	return 0;
+}
+
 int dsi_pll_set_clock_div(struct platform_device *dsidev,
 		struct dsi_clock_info *cinfo)
 {
@@ -4110,6 +4172,70 @@ int omapdss_dsi_configure_pins(struct omap_dss_device *dssdev,
 }
 EXPORT_SYMBOL(omapdss_dsi_configure_pins);
 
+int omapdss_dsi_set_clocks(struct omap_dss_device *dssdev,
+		unsigned long ddr_clk, unsigned long lp_clk)
+{
+	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	struct dsi_clock_info cinfo;
+	struct dispc_clock_info dispc_cinfo;
+	unsigned lp_clk_div;
+	unsigned long dsi_fclk;
+	int bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
+	unsigned long pck;
+	int r;
+
+	DSSDBGF("ddr_clk %lu, lp_clk %lu", ddr_clk, lp_clk);
+
+	mutex_lock(&dsi->lock);
+
+	r = dsi_pll_calc_ddrfreq(dsidev, ddr_clk, &cinfo);
+	if (r)
+		goto err;
+
+	dssdev->clocks.dsi.regn = cinfo.regn;
+	dssdev->clocks.dsi.regm = cinfo.regm;
+	dssdev->clocks.dsi.regm_dispc = cinfo.regm_dispc;
+	dssdev->clocks.dsi.regm_dsi = cinfo.regm_dsi;
+
+
+	dsi_fclk = cinfo.dsi_pll_hsdiv_dsi_clk;
+	lp_clk_div = DIV_ROUND_UP(dsi_fclk, lp_clk * 2);
+
+	dssdev->clocks.dsi.lp_clk_div = lp_clk_div;
+
+	/* pck = TxByteClkHS * datalanes * 8 / bitsperpixel */
+
+	pck = cinfo.clkin4ddr / 16 * (dsi->num_lanes_used - 1) * 8 / bpp;
+
+	DSSDBG("finding dispc dividers for pck %lu\n", pck);
+
+	dispc_find_clk_divs(pck, cinfo.dsi_pll_hsdiv_dispc_clk, &dispc_cinfo);
+
+	dssdev->clocks.dispc.channel.lck_div = dispc_cinfo.lck_div;
+	dssdev->clocks.dispc.channel.pck_div = dispc_cinfo.pck_div;
+
+
+	dssdev->clocks.dispc.dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK;
+
+	dssdev->clocks.dispc.channel.lcd_clk_src =
+		dsi->module_id == 0 ?
+		OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC :
+		OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC;
+
+	dssdev->clocks.dsi.dsi_fclk_src =
+		dsi->module_id == 0 ?
+		OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI :
+		OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI;
+
+	mutex_unlock(&dsi->lock);
+	return 0;
+err:
+	mutex_unlock(&dsi->lock);
+	return r;
+}
+EXPORT_SYMBOL(omapdss_dsi_set_clocks);
+
 int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
-- 
cgit v1.2.1


From ab585254ba6b0f2931c0f77bd99e46f017fe685c Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 23 Aug 2012 16:06:43 +0300
Subject: OMAPDSS: fix use of dssdev->caps

Recent commit dca2b1522ccab28d03fb79f6e70e70ea78033d52 (OMAPDSS: DSI:
Maintain copy of operation mode in driver data) broke DSI for video mode
displays. The commit changed the way dssdev->caps are initialized, and
the result was that every DSI display is initialized with manual-update
and tear-elim caps.

The code that sets dssdev->caps is not very good, even when fixed.
omapdss driver shouldn't be writing dssdev->caps at all.

This patch fixes the problem with video mode displays by moving the
initialization of dssdev->caps to the panel driver. The same change is
done for RFBI.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-n8x0.c | 1 +
 drivers/video/omap2/displays/panel-taal.c | 2 ++
 drivers/video/omap2/dss/dsi.c             | 5 -----
 drivers/video/omap2/dss/rfbi.c            | 1 -
 4 files changed, 3 insertions(+), 6 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-n8x0.c b/drivers/video/omap2/displays/panel-n8x0.c
index 17ae85e0033f..3fc5ad081a21 100644
--- a/drivers/video/omap2/displays/panel-n8x0.c
+++ b/drivers/video/omap2/displays/panel-n8x0.c
@@ -489,6 +489,7 @@ static int n8x0_panel_probe(struct omap_dss_device *dssdev)
 	dssdev->panel.timings.y_res = 480;
 	dssdev->ctrl.pixel_size = 16;
 	dssdev->ctrl.rfbi_timings = n8x0_panel_timings;
+	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
 
 	memset(&props, 0, sizeof(props));
 	props.max_brightness = 127;
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index ddda96a52d06..7b2d7bb79e68 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -884,6 +884,8 @@ static int taal_probe(struct omap_dss_device *dssdev)
 
 	dssdev->panel.timings = panel_config->timings;
 	dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
+	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
+		OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
 
 	td = kzalloc(sizeof(*td), GFP_KERNEL);
 	if (!td) {
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 340c832d21d8..254666fd3958 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4866,11 +4866,6 @@ static int __init dsi_init_display(struct omap_dss_device *dssdev)
 
 	DSSDBG("DSI init\n");
 
-	if (dsi->mode == OMAP_DSS_DSI_CMD_MODE) {
-		dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
-			OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
-	}
-
 	if (dsi->vdds_dsi_reg == NULL) {
 		struct regulator *vdds_dsi;
 
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 5a9c0e9d8710..2e520d3085c8 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -939,7 +939,6 @@ EXPORT_SYMBOL(omapdss_rfbi_display_disable);
 static int __init rfbi_init_display(struct omap_dss_device *dssdev)
 {
 	rfbi.dssdev[dssdev->phy.rfbi.channel] = dssdev;
-	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
 	return 0;
 }
 
-- 
cgit v1.2.1


From 5e56ad44b4d2de688823933643ff80389f33daae Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 29 Aug 2012 16:31:29 +0300
Subject: OMAPDSS: Taal: use devm_* functions

Use devm_ functions in panel-taal.c's probe when possible. Also reorder
the initialization sequence so that devm_ allocations are done before
things that require explicit freeing. This simplifies the probe and
remove functions.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-taal.c | 118 +++++++++++-------------------
 1 file changed, 44 insertions(+), 74 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 7b2d7bb79e68..125586490e37 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -865,10 +865,8 @@ static int taal_probe(struct omap_dss_device *dssdev)
 
 	dev_dbg(&dssdev->dev, "probe\n");
 
-	if (!panel_data || !panel_data->name) {
-		r = -EINVAL;
-		goto err;
-	}
+	if (!panel_data || !panel_data->name)
+		return -EINVAL;
 
 	for (i = 0; i < ARRAY_SIZE(panel_configs); i++) {
 		if (strcmp(panel_data->name, panel_configs[i].name) == 0) {
@@ -877,21 +875,17 @@ static int taal_probe(struct omap_dss_device *dssdev)
 		}
 	}
 
-	if (!panel_config) {
-		r = -EINVAL;
-		goto err;
-	}
+	if (!panel_config)
+		return -EINVAL;
 
 	dssdev->panel.timings = panel_config->timings;
 	dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
 	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
 		OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
 
-	td = kzalloc(sizeof(*td), GFP_KERNEL);
-	if (!td) {
-		r = -ENOMEM;
-		goto err;
-	}
+	td = devm_kzalloc(&dssdev->dev, sizeof(*td), GFP_KERNEL);
+	if (!td)
+		return -ENOMEM;
 	td->dssdev = dssdev;
 	td->panel_config = panel_config;
 	td->esd_interval = panel_data->esd_interval;
@@ -902,26 +896,51 @@ static int taal_probe(struct omap_dss_device *dssdev)
 
 	atomic_set(&td->do_update, 0);
 
-	td->workqueue = create_singlethread_workqueue("taal_esd");
-	if (td->workqueue == NULL) {
-		dev_err(&dssdev->dev, "can't create ESD workqueue\n");
-		r = -ENOMEM;
-		goto err_wq;
-	}
-	INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work);
-	INIT_DELAYED_WORK(&td->ulps_work, taal_ulps_work);
-
 	dev_set_drvdata(&dssdev->dev, td);
 
 	if (gpio_is_valid(panel_data->reset_gpio)) {
-		r = gpio_request_one(panel_data->reset_gpio, GPIOF_OUT_INIT_LOW,
-				"taal rst");
+		r = devm_gpio_request_one(&dssdev->dev, panel_data->reset_gpio,
+				GPIOF_OUT_INIT_LOW, "taal rst");
 		if (r) {
 			dev_err(&dssdev->dev, "failed to request reset gpio\n");
-			goto err_rst_gpio;
+			return r;
 		}
 	}
 
+	if (panel_data->use_ext_te) {
+		int gpio = panel_data->ext_te_gpio;
+
+		r = devm_gpio_request_one(&dssdev->dev, gpio, GPIOF_IN,
+				"taal irq");
+		if (r) {
+			dev_err(&dssdev->dev, "GPIO request failed\n");
+			return r;
+		}
+
+		r = devm_request_irq(&dssdev->dev, gpio_to_irq(gpio),
+				taal_te_isr,
+				IRQF_TRIGGER_RISING,
+				"taal vsync", dssdev);
+
+		if (r) {
+			dev_err(&dssdev->dev, "IRQ request failed\n");
+			return r;
+		}
+
+		INIT_DELAYED_WORK_DEFERRABLE(&td->te_timeout_work,
+					taal_te_timeout_work_callback);
+
+		dev_dbg(&dssdev->dev, "Using GPIO TE\n");
+	}
+
+	td->workqueue = create_singlethread_workqueue("taal_esd");
+	if (td->workqueue == NULL) {
+		dev_err(&dssdev->dev, "can't create ESD workqueue\n");
+		return -ENOMEM;
+	}
+	INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work);
+	INIT_DELAYED_WORK(&td->ulps_work, taal_ulps_work);
+
 	taal_hw_reset(dssdev);
 
 	if (panel_data->use_dsi_backlight) {
@@ -945,31 +964,6 @@ static int taal_probe(struct omap_dss_device *dssdev)
 		taal_bl_update_status(bldev);
 	}
 
-	if (panel_data->use_ext_te) {
-		int gpio = panel_data->ext_te_gpio;
-
-		r = gpio_request_one(gpio, GPIOF_IN, "taal irq");
-		if (r) {
-			dev_err(&dssdev->dev, "GPIO request failed\n");
-			goto err_gpio;
-		}
-
-		r = request_irq(gpio_to_irq(gpio), taal_te_isr,
-				IRQF_TRIGGER_RISING,
-				"taal vsync", dssdev);
-
-		if (r) {
-			dev_err(&dssdev->dev, "IRQ request failed\n");
-			gpio_free(gpio);
-			goto err_irq;
-		}
-
-		INIT_DELAYED_WORK_DEFERRABLE(&td->te_timeout_work,
-					taal_te_timeout_work_callback);
-
-		dev_dbg(&dssdev->dev, "Using GPIO TE\n");
-	}
-
 	r = omap_dsi_request_vc(dssdev, &td->channel);
 	if (r) {
 		dev_err(&dssdev->dev, "failed to get virtual channel\n");
@@ -993,29 +987,16 @@ static int taal_probe(struct omap_dss_device *dssdev)
 err_vc_id:
 	omap_dsi_release_vc(dssdev, td->channel);
 err_req_vc:
-	if (panel_data->use_ext_te)
-		free_irq(gpio_to_irq(panel_data->ext_te_gpio), dssdev);
-err_irq:
-	if (panel_data->use_ext_te)
-		gpio_free(panel_data->ext_te_gpio);
-err_gpio:
 	if (bldev != NULL)
 		backlight_device_unregister(bldev);
 err_bl:
-	if (gpio_is_valid(panel_data->reset_gpio))
-		gpio_free(panel_data->reset_gpio);
-err_rst_gpio:
 	destroy_workqueue(td->workqueue);
-err_wq:
-	kfree(td);
-err:
 	return r;
 }
 
 static void __exit taal_remove(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	struct backlight_device *bldev;
 
 	dev_dbg(&dssdev->dev, "remove\n");
@@ -1023,12 +1004,6 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
 	sysfs_remove_group(&dssdev->dev.kobj, &taal_attr_group);
 	omap_dsi_release_vc(dssdev, td->channel);
 
-	if (panel_data->use_ext_te) {
-		int gpio = panel_data->ext_te_gpio;
-		free_irq(gpio_to_irq(gpio), dssdev);
-		gpio_free(gpio);
-	}
-
 	bldev = td->bldev;
 	if (bldev != NULL) {
 		bldev->props.power = FB_BLANK_POWERDOWN;
@@ -1042,11 +1017,6 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
 
 	/* reset, to be sure that the panel is in a valid state */
 	taal_hw_reset(dssdev);
-
-	if (gpio_is_valid(panel_data->reset_gpio))
-		gpio_free(panel_data->reset_gpio);
-
-	kfree(td);
 }
 
 static int taal_power_on(struct omap_dss_device *dssdev)
-- 
cgit v1.2.1


From 9586778de5586536fe0c968b226bde574adf6107 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 30 Aug 2012 10:54:12 +0300
Subject: OMAPFB1: remove unnecessary includes

Remove unnecessary includes from the old omapfb driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap/hwa742.c        | 1 -
 drivers/video/omap/lcd_ams_delta.c | 1 -
 drivers/video/omap/lcd_palmte.c    | 1 -
 3 files changed, 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index 9f1d23c319cb..f349ee6f0cea 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -27,7 +27,6 @@
 #include <linux/clk.h>
 #include <linux/interrupt.h>
 
-#include <plat/dma.h>
 #include "omapfb.h"
 
 #define HWA742_REV_CODE_REG       0x0
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
index d3a311327227..5cca6b373af7 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c
@@ -28,7 +28,6 @@
 #include <linux/gpio.h>
 
 #include <plat/board-ams-delta.h>
-#include <mach/hardware.h>
 
 #include "omapfb.h"
 
diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/omap/lcd_palmte.c
index 88c31eb0cd6c..ff4fb624b904 100644
--- a/drivers/video/omap/lcd_palmte.c
+++ b/drivers/video/omap/lcd_palmte.c
@@ -23,7 +23,6 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <plat/fpga.h>
 #include "omapfb.h"
 
 static int palmte_panel_init(struct lcd_panel *panel,
-- 
cgit v1.2.1


From 10bc80f62562a9151d24f7f005d400fb65c18e10 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 30 Aug 2012 10:54:50 +0300
Subject: OMAPFB1: remove a non-used table

The old omapfb driver contains a table for DMA element types, which is
not used. Remove it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap/omapfb_main.c | 9 ---------
 1 file changed, 9 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index f54b463709e9..4351c438b76f 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -131,15 +131,6 @@ static void omapfb_rqueue_unlock(struct omapfb_device *fbdev)
  * LCD controller and LCD DMA
  * ---------------------------------------------------------------------------
  */
-/* Lookup table to map elem size to elem type. */
-static const int dma_elem_type[] = {
-	0,
-	OMAP_DMA_DATA_TYPE_S8,
-	OMAP_DMA_DATA_TYPE_S16,
-	0,
-	OMAP_DMA_DATA_TYPE_S32,
-};
-
 /*
  * Allocate resources needed for LCD controller and LCD DMA operations. Video
  * memory is allocated from system memory according to the virtual display
-- 
cgit v1.2.1


From fe6a466283cf1ced93360bd5f5055d6543021a6a Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 30 Aug 2012 10:52:47 +0300
Subject: OMAPDSS: remove unnecessary includes

Remove unnecessary includes from omapdss.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c   | 2 --
 drivers/video/omap2/dss/dpi.c     | 1 -
 drivers/video/omap2/dss/dsi.c     | 1 -
 drivers/video/omap2/dss/dss.c     | 1 -
 drivers/video/omap2/dss/overlay.c | 1 -
 drivers/video/omap2/dss/venc.c    | 1 -
 6 files changed, 7 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 0de9a7efcbc4..e934abb08dcf 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -37,8 +37,6 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 
-#include <plat/clock.h>
-
 #include <video/omapdss.h>
 
 #include "dss.h"
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 25fb8953b80a..99b9851f8429 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -31,7 +31,6 @@
 #include <linux/regulator/consumer.h>
 
 #include <video/omapdss.h>
-#include <plat/cpu.h>
 
 #include "dss.h"
 #include "dss_features.h"
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 254666fd3958..8d815e39e45d 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -41,7 +41,6 @@
 
 #include <video/omapdss.h>
 #include <video/mipi_display.h>
-#include <plat/clock.h>
 
 #include "dss.h"
 #include "dss_features.h"
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 31a553a6ee6f..759dbee48342 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -36,7 +36,6 @@
 #include <video/omapdss.h>
 
 #include <plat/cpu.h>
-#include <plat/clock.h>
 
 #include "dss.h"
 #include "dss_features.h"
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 952c6fad9a81..94e74be0788d 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -32,7 +32,6 @@
 #include <linux/slab.h>
 
 #include <video/omapdss.h>
-#include <plat/cpu.h>
 
 #include "dss.h"
 #include "dss_features.h"
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 4a6caf9c6da3..45252cf034b3 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -36,7 +36,6 @@
 #include <linux/pm_runtime.h>
 
 #include <video/omapdss.h>
-#include <plat/cpu.h>
 
 #include "dss.h"
 #include "dss_features.h"
-- 
cgit v1.2.1


From ca444158723f3b92531dc552c154fed108f8bc15 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 30 Aug 2012 16:53:29 +0300
Subject: OMAPFB: clear framebuffers with CPU

Currently vram.c clears the allocated memory automatically using OMAP
system DMA. In an effort to reduce OMAP dependencies, we'll do the
memory clear with CPU from now on.

This patch implements clearing of the framebuffer in omapfb, using
cfb_fillrect() to do the actual clear.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/omapfb/omapfb-main.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index fc671d3d8004..7afdfcf3bac8 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1592,6 +1592,20 @@ static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev)
 	return 0;
 }
 
+static void omapfb_clear_fb(struct fb_info *fbi)
+{
+	const struct fb_fillrect rect = {
+		.dx = 0,
+		.dy = 0,
+		.width = fbi->var.xres_virtual,
+		.height = fbi->var.yres_virtual,
+		.color = 0,
+		.rop = ROP_COPY,
+	};
+
+	cfb_fillrect(fbi, &rect);
+}
+
 int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type)
 {
 	struct omapfb_info *ofbi = FB2OFB(fbi);
@@ -1661,6 +1675,8 @@ int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type)
 			goto err;
 	}
 
+	omapfb_clear_fb(fbi);
+
 	return 0;
 err:
 	omapfb_free_fbmem(fbi);
@@ -1972,6 +1988,16 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
 		}
 	}
 
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		struct fb_info *fbi = fbdev->fbs[i];
+		struct omapfb_info *ofbi = FB2OFB(fbi);
+
+		if (ofbi->region->size == 0)
+			continue;
+
+		omapfb_clear_fb(fbi);
+	}
+
 	/* Enable fb0 */
 	if (fbdev->num_fbs > 0) {
 		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]);
-- 
cgit v1.2.1


From 5ae1f3723f089a67ef3bbcba9b8ad1150c091632 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 30 Aug 2012 16:54:01 +0300
Subject: OMAPDSS: VRAM: Remove clearing with sDMA

Currently vram.c clears the allocated memory automatically using OMAP
system DMA. In an effort to reduce OMAP dependencies, we'll do the
memory clear with CPU from now on.

The previous patch implemented memory clear in the omapfb driver, and
this patch removes the now obsolete clear functionality from vram.c.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
---
 drivers/video/omap2/vram.c | 56 ----------------------------------------------
 1 file changed, 56 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c
index 87e421e25afe..f2b15c4a75bc 100644
--- a/drivers/video/omap2/vram.c
+++ b/drivers/video/omap2/vram.c
@@ -34,7 +34,6 @@
 #include <asm/setup.h>
 
 #include <plat/vram.h>
-#include <plat/dma.h>
 
 #ifdef DEBUG
 #define DBG(format, ...) pr_debug("VRAM: " format, ## __VA_ARGS__)
@@ -250,59 +249,6 @@ int omap_vram_reserve(unsigned long paddr, size_t size)
 }
 EXPORT_SYMBOL(omap_vram_reserve);
 
-static void _omap_vram_dma_cb(int lch, u16 ch_status, void *data)
-{
-	struct completion *compl = data;
-	complete(compl);
-}
-
-static int _omap_vram_clear(u32 paddr, unsigned pages)
-{
-	struct completion compl;
-	unsigned elem_count;
-	unsigned frame_count;
-	int r;
-	int lch;
-
-	init_completion(&compl);
-
-	r = omap_request_dma(OMAP_DMA_NO_DEVICE, "VRAM DMA",
-			_omap_vram_dma_cb,
-			&compl, &lch);
-	if (r) {
-		pr_err("VRAM: request_dma failed for memory clear\n");
-		return -EBUSY;
-	}
-
-	elem_count = pages * PAGE_SIZE / 4;
-	frame_count = 1;
-
-	omap_set_dma_transfer_params(lch, OMAP_DMA_DATA_TYPE_S32,
-			elem_count, frame_count,
-			OMAP_DMA_SYNC_ELEMENT,
-			0, 0);
-
-	omap_set_dma_dest_params(lch, 0, OMAP_DMA_AMODE_POST_INC,
-			paddr, 0, 0);
-
-	omap_set_dma_color_mode(lch, OMAP_DMA_CONSTANT_FILL, 0x000000);
-
-	omap_start_dma(lch);
-
-	if (wait_for_completion_timeout(&compl, msecs_to_jiffies(1000)) == 0) {
-		omap_stop_dma(lch);
-		pr_err("VRAM: dma timeout while clearing memory\n");
-		r = -EIO;
-		goto err;
-	}
-
-	r = 0;
-err:
-	omap_free_dma(lch);
-
-	return r;
-}
-
 static int _omap_vram_alloc(unsigned pages, unsigned long *paddr)
 {
 	struct vram_region *rm;
@@ -337,8 +283,6 @@ found:
 
 		*paddr = start;
 
-		_omap_vram_clear(start, pages);
-
 		return 0;
 	}
 
-- 
cgit v1.2.1


From f075a594d7b6296a3bd003f3f60282f30471d7ac Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 3 Sep 2012 10:42:50 +0300
Subject: OMAPDSS: Taal: Reogranize for device tree

Reorganize taal driver to make it easier to integrate device tree code.
Instead of storing the panel's platform data, we'll "parse" the platform
data and store the required information in driver's own data. This way
adding device tree data parsing is simple.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-taal.c | 127 +++++++++++++++++-------------
 1 file changed, 74 insertions(+), 53 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 125586490e37..4cf94161ff51 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -121,6 +121,18 @@ struct taal_data {
 
 	struct omap_dss_device *dssdev;
 
+	/* panel specific HW info */
+	struct panel_config *panel_config;
+
+	/* panel HW configuration from DT or platform data */
+	int reset_gpio;
+	int ext_te_gpio;
+
+	bool use_dsi_backlight;
+
+	struct omap_dsi_pin_config pin_config;
+
+	/* runtime variables */
 	bool enabled;
 	u8 rotate;
 	bool mirror;
@@ -145,16 +157,8 @@ struct taal_data {
 	bool ulps_enabled;
 	unsigned ulps_timeout;
 	struct delayed_work ulps_work;
-
-	struct panel_config *panel_config;
 };
 
-static inline struct nokia_dsi_panel_data
-*get_panel_data(const struct omap_dss_device *dssdev)
-{
-	return (struct nokia_dsi_panel_data *) dssdev->data;
-}
-
 static void taal_esd_work(struct work_struct *work);
 static void taal_ulps_work(struct work_struct *work);
 
@@ -371,7 +375,6 @@ static void taal_cancel_ulps_work(struct omap_dss_device *dssdev)
 static int taal_enter_ulps(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	int r;
 
 	if (td->ulps_enabled)
@@ -383,7 +386,8 @@ static int taal_enter_ulps(struct omap_dss_device *dssdev)
 	if (r)
 		goto err;
 
-	disable_irq(gpio_to_irq(panel_data->ext_te_gpio));
+	if (gpio_is_valid(td->ext_te_gpio))
+		disable_irq(gpio_to_irq(td->ext_te_gpio));
 
 	omapdss_dsi_display_disable(dssdev, false, true);
 
@@ -405,7 +409,6 @@ err:
 static int taal_exit_ulps(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	int r;
 
 	if (!td->ulps_enabled)
@@ -425,7 +428,8 @@ static int taal_exit_ulps(struct omap_dss_device *dssdev)
 		goto err2;
 	}
 
-	enable_irq(gpio_to_irq(panel_data->ext_te_gpio));
+	if (gpio_is_valid(td->ext_te_gpio))
+		enable_irq(gpio_to_irq(td->ext_te_gpio));
 
 	taal_queue_ulps_work(dssdev);
 
@@ -438,7 +442,8 @@ err2:
 
 	r = taal_panel_reset(dssdev);
 	if (!r) {
-		enable_irq(gpio_to_irq(panel_data->ext_te_gpio));
+		if (gpio_is_valid(td->ext_te_gpio))
+			enable_irq(gpio_to_irq(td->ext_te_gpio));
 		td->ulps_enabled = false;
 	}
 err1:
@@ -835,71 +840,93 @@ static struct attribute_group taal_attr_group = {
 static void taal_hw_reset(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 
-	if (panel_data->reset_gpio == -1)
+	if (!gpio_is_valid(td->reset_gpio))
 		return;
 
-	gpio_set_value(panel_data->reset_gpio, 1);
+	gpio_set_value(td->reset_gpio, 1);
 	if (td->panel_config->reset_sequence.high)
 		udelay(td->panel_config->reset_sequence.high);
 	/* reset the panel */
-	gpio_set_value(panel_data->reset_gpio, 0);
+	gpio_set_value(td->reset_gpio, 0);
 	/* assert reset */
 	if (td->panel_config->reset_sequence.low)
 		udelay(td->panel_config->reset_sequence.low);
-	gpio_set_value(panel_data->reset_gpio, 1);
+	gpio_set_value(td->reset_gpio, 1);
 	/* wait after releasing reset */
 	if (td->panel_config->sleep.hw_reset)
 		msleep(td->panel_config->sleep.hw_reset);
 }
 
+static void taal_probe_pdata(struct taal_data *td,
+		const struct nokia_dsi_panel_data *pdata)
+{
+	td->reset_gpio = pdata->reset_gpio;
+
+	if (pdata->use_ext_te)
+		td->ext_te_gpio = pdata->ext_te_gpio;
+	else
+		td->ext_te_gpio = -1;
+
+	td->esd_interval = pdata->esd_interval;
+	td->ulps_timeout = pdata->ulps_timeout;
+
+	td->use_dsi_backlight = pdata->use_dsi_backlight;
+
+	td->pin_config = pdata->pin_config;
+}
+
 static int taal_probe(struct omap_dss_device *dssdev)
 {
 	struct backlight_properties props;
 	struct taal_data *td;
 	struct backlight_device *bldev = NULL;
-	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
-	struct panel_config *panel_config = NULL;
 	int r, i;
+	const char *panel_name;
 
 	dev_dbg(&dssdev->dev, "probe\n");
 
-	if (!panel_data || !panel_data->name)
+	td = devm_kzalloc(&dssdev->dev, sizeof(*td), GFP_KERNEL);
+	if (!td)
+		return -ENOMEM;
+
+	dev_set_drvdata(&dssdev->dev, td);
+	td->dssdev = dssdev;
+
+	if (dssdev->data) {
+		const struct nokia_dsi_panel_data *pdata = dssdev->data;
+
+		taal_probe_pdata(td, pdata);
+
+		panel_name = pdata->name;
+	} else {
+		return -ENODEV;
+	}
+
+	if (panel_name == NULL)
 		return -EINVAL;
 
 	for (i = 0; i < ARRAY_SIZE(panel_configs); i++) {
-		if (strcmp(panel_data->name, panel_configs[i].name) == 0) {
-			panel_config = &panel_configs[i];
+		if (strcmp(panel_name, panel_configs[i].name) == 0) {
+			td->panel_config = &panel_configs[i];
 			break;
 		}
 	}
 
-	if (!panel_config)
+	if (!td->panel_config)
 		return -EINVAL;
 
-	dssdev->panel.timings = panel_config->timings;
+	dssdev->panel.timings = td->panel_config->timings;
 	dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
 	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
 		OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
 
-	td = devm_kzalloc(&dssdev->dev, sizeof(*td), GFP_KERNEL);
-	if (!td)
-		return -ENOMEM;
-	td->dssdev = dssdev;
-	td->panel_config = panel_config;
-	td->esd_interval = panel_data->esd_interval;
-	td->ulps_enabled = false;
-	td->ulps_timeout = panel_data->ulps_timeout;
-
 	mutex_init(&td->lock);
 
 	atomic_set(&td->do_update, 0);
 
-	dev_set_drvdata(&dssdev->dev, td);
-
-	if (gpio_is_valid(panel_data->reset_gpio)) {
-		r = devm_gpio_request_one(&dssdev->dev, panel_data->reset_gpio,
+	if (gpio_is_valid(td->reset_gpio)) {
+		r = devm_gpio_request_one(&dssdev->dev, td->reset_gpio,
 				GPIOF_OUT_INIT_LOW, "taal rst");
 		if (r) {
 			dev_err(&dssdev->dev, "failed to request reset gpio\n");
@@ -907,17 +934,15 @@ static int taal_probe(struct omap_dss_device *dssdev)
 		}
 	}
 
-	if (panel_data->use_ext_te) {
-		int gpio = panel_data->ext_te_gpio;
-
-		r = devm_gpio_request_one(&dssdev->dev, gpio, GPIOF_IN,
-				"taal irq");
+	if (gpio_is_valid(td->ext_te_gpio)) {
+		r = devm_gpio_request_one(&dssdev->dev, td->ext_te_gpio,
+				GPIOF_IN, "taal irq");
 		if (r) {
 			dev_err(&dssdev->dev, "GPIO request failed\n");
 			return r;
 		}
 
-		r = devm_request_irq(&dssdev->dev, gpio_to_irq(gpio),
+		r = devm_request_irq(&dssdev->dev, gpio_to_irq(td->ext_te_gpio),
 				taal_te_isr,
 				IRQF_TRIGGER_RISING,
 				"taal vsync", dssdev);
@@ -943,7 +968,7 @@ static int taal_probe(struct omap_dss_device *dssdev)
 
 	taal_hw_reset(dssdev);
 
-	if (panel_data->use_dsi_backlight) {
+	if (td->use_dsi_backlight) {
 		memset(&props, 0, sizeof(struct backlight_properties));
 		props.max_brightness = 255;
 
@@ -1022,11 +1047,10 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
 static int taal_power_on(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	u8 id1, id2, id3;
 	int r;
 
-	r = omapdss_dsi_configure_pins(dssdev, &panel_data->pin_config);
+	r = omapdss_dsi_configure_pins(dssdev, &td->pin_config);
 	if (r) {
 		dev_err(&dssdev->dev, "failed to configure DSI pins\n");
 		goto err0;
@@ -1339,7 +1363,6 @@ static int taal_update(struct omap_dss_device *dssdev,
 				    u16 x, u16 y, u16 w, u16 h)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	int r;
 
 	dev_dbg(&dssdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
@@ -1363,7 +1386,7 @@ static int taal_update(struct omap_dss_device *dssdev,
 	if (r)
 		goto err;
 
-	if (td->te_enabled && panel_data->use_ext_te) {
+	if (td->te_enabled && gpio_is_valid(td->ext_te_gpio)) {
 		schedule_delayed_work(&td->te_timeout_work,
 				msecs_to_jiffies(250));
 		atomic_set(&td->do_update, 1);
@@ -1402,7 +1425,6 @@ static int taal_sync(struct omap_dss_device *dssdev)
 static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	int r;
 
 	if (enable)
@@ -1410,7 +1432,7 @@ static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable)
 	else
 		r = taal_dcs_write_0(td, MIPI_DCS_SET_TEAR_OFF);
 
-	if (!panel_data->use_ext_te)
+	if (!gpio_is_valid(td->ext_te_gpio))
 		omapdss_dsi_enable_te(dssdev, enable);
 
 	if (td->panel_config->sleep.enable_te)
@@ -1720,7 +1742,6 @@ static void taal_esd_work(struct work_struct *work)
 	struct taal_data *td = container_of(work, struct taal_data,
 			esd_work.work);
 	struct omap_dss_device *dssdev = td->dssdev;
-	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	u8 state1, state2;
 	int r;
 
@@ -1767,7 +1788,7 @@ static void taal_esd_work(struct work_struct *work)
 	}
 	/* Self-diagnostics result is also shown on TE GPIO line. We need
 	 * to re-enable TE after self diagnostics */
-	if (td->te_enabled && panel_data->use_ext_te) {
+	if (td->te_enabled && gpio_is_valid(td->ext_te_gpio)) {
 		r = taal_dcs_write_1(td, MIPI_DCS_SET_TEAR_ON, 0);
 		if (r)
 			goto err;
-- 
cgit v1.2.1


From a6df3fd963e3a0065418621edb30737d11c6662b Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 4 Sep 2012 10:52:19 +0300
Subject: OMAPDSS: TFP410: use devm_gpio_request_one

Use devm_ version instead of the regular gpio_request_one to simplify
the error handling.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/displays/panel-tfp410.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/displays/panel-tfp410.c b/drivers/video/omap2/displays/panel-tfp410.c
index 4be9a59664d5..383811cf8648 100644
--- a/drivers/video/omap2/displays/panel-tfp410.c
+++ b/drivers/video/omap2/displays/panel-tfp410.c
@@ -119,8 +119,8 @@ static int tfp410_probe(struct omap_dss_device *dssdev)
 	}
 
 	if (gpio_is_valid(ddata->pd_gpio)) {
-		r = gpio_request_one(ddata->pd_gpio, GPIOF_OUT_INIT_LOW,
-				"tfp410 pd");
+		r = devm_gpio_request_one(&dssdev->dev, ddata->pd_gpio,
+				GPIOF_OUT_INIT_LOW, "tfp410 pd");
 		if (r) {
 			dev_err(&dssdev->dev, "Failed to request PD GPIO %d\n",
 					ddata->pd_gpio);
@@ -135,8 +135,7 @@ static int tfp410_probe(struct omap_dss_device *dssdev)
 		if (!adapter) {
 			dev_err(&dssdev->dev, "Failed to get I2C adapter, bus %d\n",
 					i2c_bus_num);
-			r = -EINVAL;
-			goto err_i2c;
+			return -EINVAL;
 		}
 
 		ddata->i2c_adapter = adapter;
@@ -145,10 +144,6 @@ static int tfp410_probe(struct omap_dss_device *dssdev)
 	dev_set_drvdata(&dssdev->dev, ddata);
 
 	return 0;
-err_i2c:
-	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_free(ddata->pd_gpio);
-	return r;
 }
 
 static void __exit tfp410_remove(struct omap_dss_device *dssdev)
@@ -160,9 +155,6 @@ static void __exit tfp410_remove(struct omap_dss_device *dssdev)
 	if (ddata->i2c_adapter)
 		i2c_put_adapter(ddata->i2c_adapter);
 
-	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_free(ddata->pd_gpio);
-
 	dev_set_drvdata(&dssdev->dev, NULL);
 
 	mutex_unlock(&ddata->lock);
-- 
cgit v1.2.1


From 916915161d6a6995275dd41c580b3c9e16a859df Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 6 Aug 2012 14:40:00 +0300
Subject: OMAPDSS: split overlay sysfs code

Separate sysfs code for overlays to a separate file. This is a bit
cleaner, and will allow us later to easily switch off the sysfs support
via Kconfig option.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/Makefile        |   2 +-
 drivers/video/omap2/dss/dss.h           |   3 +
 drivers/video/omap2/dss/overlay-sysfs.c | 456 ++++++++++++++++++++++++++++++++
 drivers/video/omap2/dss/overlay.c       | 420 +----------------------------
 4 files changed, 462 insertions(+), 419 deletions(-)
 create mode 100644 drivers/video/omap2/dss/overlay-sysfs.c

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile
index 30a48fba75b0..927d5ce48e75 100644
--- a/drivers/video/omap2/dss/Makefile
+++ b/drivers/video/omap2/dss/Makefile
@@ -1,6 +1,6 @@
 obj-$(CONFIG_OMAP2_DSS) += omapdss.o
 omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
-	manager.o overlay.o apply.o
+	manager.o overlay.o overlay-sysfs.o apply.o
 omapdss-$(CONFIG_OMAP2_DSS_DPI) += dpi.o
 omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o
 omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o venc_panel.o
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index d6cca820723c..11b053e53867 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -265,6 +265,9 @@ int dss_ovl_check(struct omap_overlay *ovl, struct omap_overlay_info *info,
 		const struct omap_video_timings *mgr_timings);
 bool dss_ovl_use_replication(struct dss_lcd_mgr_config config,
 		enum omap_color_mode mode);
+int dss_overlay_kobj_init(struct omap_overlay *ovl,
+		struct platform_device *pdev);
+void dss_overlay_kobj_uninit(struct omap_overlay *ovl);
 
 /* DSS */
 int dss_init_platform_driver(void) __init;
diff --git a/drivers/video/omap2/dss/overlay-sysfs.c b/drivers/video/omap2/dss/overlay-sysfs.c
new file mode 100644
index 000000000000..4cc5ddebfb34
--- /dev/null
+++ b/drivers/video/omap2/dss/overlay-sysfs.c
@@ -0,0 +1,456 @@
+/*
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "OVERLAY"
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/platform_device.h>
+
+#include <video/omapdss.h>
+
+#include "dss.h"
+#include "dss_features.h"
+
+static ssize_t overlay_name_show(struct omap_overlay *ovl, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n", ovl->name);
+}
+
+static ssize_t overlay_manager_show(struct omap_overlay *ovl, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			ovl->manager ? ovl->manager->name : "<none>");
+}
+
+static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf,
+		size_t size)
+{
+	int i, r;
+	struct omap_overlay_manager *mgr = NULL;
+	struct omap_overlay_manager *old_mgr;
+	int len = size;
+
+	if (buf[size-1] == '\n')
+		--len;
+
+	if (len > 0) {
+		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
+			mgr = omap_dss_get_overlay_manager(i);
+
+			if (sysfs_streq(buf, mgr->name))
+				break;
+
+			mgr = NULL;
+		}
+	}
+
+	if (len > 0 && mgr == NULL)
+		return -EINVAL;
+
+	if (mgr)
+		DSSDBG("manager %s found\n", mgr->name);
+
+	if (mgr == ovl->manager)
+		return size;
+
+	old_mgr = ovl->manager;
+
+	r = dispc_runtime_get();
+	if (r)
+		return r;
+
+	/* detach old manager */
+	if (old_mgr) {
+		r = ovl->unset_manager(ovl);
+		if (r) {
+			DSSERR("detach failed\n");
+			goto err;
+		}
+
+		r = old_mgr->apply(old_mgr);
+		if (r)
+			goto err;
+	}
+
+	if (mgr) {
+		r = ovl->set_manager(ovl, mgr);
+		if (r) {
+			DSSERR("Failed to attach overlay\n");
+			goto err;
+		}
+
+		r = mgr->apply(mgr);
+		if (r)
+			goto err;
+	}
+
+	dispc_runtime_put();
+
+	return size;
+
+err:
+	dispc_runtime_put();
+	return r;
+}
+
+static ssize_t overlay_input_size_show(struct omap_overlay *ovl, char *buf)
+{
+	struct omap_overlay_info info;
+
+	ovl->get_overlay_info(ovl, &info);
+
+	return snprintf(buf, PAGE_SIZE, "%d,%d\n",
+			info.width, info.height);
+}
+
+static ssize_t overlay_screen_width_show(struct omap_overlay *ovl, char *buf)
+{
+	struct omap_overlay_info info;
+
+	ovl->get_overlay_info(ovl, &info);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", info.screen_width);
+}
+
+static ssize_t overlay_position_show(struct omap_overlay *ovl, char *buf)
+{
+	struct omap_overlay_info info;
+
+	ovl->get_overlay_info(ovl, &info);
+
+	return snprintf(buf, PAGE_SIZE, "%d,%d\n",
+			info.pos_x, info.pos_y);
+}
+
+static ssize_t overlay_position_store(struct omap_overlay *ovl,
+		const char *buf, size_t size)
+{
+	int r;
+	char *last;
+	struct omap_overlay_info info;
+
+	ovl->get_overlay_info(ovl, &info);
+
+	info.pos_x = simple_strtoul(buf, &last, 10);
+	++last;
+	if (last - buf >= size)
+		return -EINVAL;
+
+	info.pos_y = simple_strtoul(last, &last, 10);
+
+	r = ovl->set_overlay_info(ovl, &info);
+	if (r)
+		return r;
+
+	if (ovl->manager) {
+		r = ovl->manager->apply(ovl->manager);
+		if (r)
+			return r;
+	}
+
+	return size;
+}
+
+static ssize_t overlay_output_size_show(struct omap_overlay *ovl, char *buf)
+{
+	struct omap_overlay_info info;
+
+	ovl->get_overlay_info(ovl, &info);
+
+	return snprintf(buf, PAGE_SIZE, "%d,%d\n",
+			info.out_width, info.out_height);
+}
+
+static ssize_t overlay_output_size_store(struct omap_overlay *ovl,
+		const char *buf, size_t size)
+{
+	int r;
+	char *last;
+	struct omap_overlay_info info;
+
+	ovl->get_overlay_info(ovl, &info);
+
+	info.out_width = simple_strtoul(buf, &last, 10);
+	++last;
+	if (last - buf >= size)
+		return -EINVAL;
+
+	info.out_height = simple_strtoul(last, &last, 10);
+
+	r = ovl->set_overlay_info(ovl, &info);
+	if (r)
+		return r;
+
+	if (ovl->manager) {
+		r = ovl->manager->apply(ovl->manager);
+		if (r)
+			return r;
+	}
+
+	return size;
+}
+
+static ssize_t overlay_enabled_show(struct omap_overlay *ovl, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n", ovl->is_enabled(ovl));
+}
+
+static ssize_t overlay_enabled_store(struct omap_overlay *ovl, const char *buf,
+		size_t size)
+{
+	int r;
+	bool enable;
+
+	r = strtobool(buf, &enable);
+	if (r)
+		return r;
+
+	if (enable)
+		r = ovl->enable(ovl);
+	else
+		r = ovl->disable(ovl);
+
+	if (r)
+		return r;
+
+	return size;
+}
+
+static ssize_t overlay_global_alpha_show(struct omap_overlay *ovl, char *buf)
+{
+	struct omap_overlay_info info;
+
+	ovl->get_overlay_info(ovl, &info);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			info.global_alpha);
+}
+
+static ssize_t overlay_global_alpha_store(struct omap_overlay *ovl,
+		const char *buf, size_t size)
+{
+	int r;
+	u8 alpha;
+	struct omap_overlay_info info;
+
+	if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) == 0)
+		return -ENODEV;
+
+	r = kstrtou8(buf, 0, &alpha);
+	if (r)
+		return r;
+
+	ovl->get_overlay_info(ovl, &info);
+
+	info.global_alpha = alpha;
+
+	r = ovl->set_overlay_info(ovl, &info);
+	if (r)
+		return r;
+
+	if (ovl->manager) {
+		r = ovl->manager->apply(ovl->manager);
+		if (r)
+			return r;
+	}
+
+	return size;
+}
+
+static ssize_t overlay_pre_mult_alpha_show(struct omap_overlay *ovl,
+		char *buf)
+{
+	struct omap_overlay_info info;
+
+	ovl->get_overlay_info(ovl, &info);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			info.pre_mult_alpha);
+}
+
+static ssize_t overlay_pre_mult_alpha_store(struct omap_overlay *ovl,
+		const char *buf, size_t size)
+{
+	int r;
+	u8 alpha;
+	struct omap_overlay_info info;
+
+	if ((ovl->caps & OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA) == 0)
+		return -ENODEV;
+
+	r = kstrtou8(buf, 0, &alpha);
+	if (r)
+		return r;
+
+	ovl->get_overlay_info(ovl, &info);
+
+	info.pre_mult_alpha = alpha;
+
+	r = ovl->set_overlay_info(ovl, &info);
+	if (r)
+		return r;
+
+	if (ovl->manager) {
+		r = ovl->manager->apply(ovl->manager);
+		if (r)
+			return r;
+	}
+
+	return size;
+}
+
+static ssize_t overlay_zorder_show(struct omap_overlay *ovl, char *buf)
+{
+	struct omap_overlay_info info;
+
+	ovl->get_overlay_info(ovl, &info);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", info.zorder);
+}
+
+static ssize_t overlay_zorder_store(struct omap_overlay *ovl,
+		const char *buf, size_t size)
+{
+	int r;
+	u8 zorder;
+	struct omap_overlay_info info;
+
+	if ((ovl->caps & OMAP_DSS_OVL_CAP_ZORDER) == 0)
+		return -ENODEV;
+
+	r = kstrtou8(buf, 0, &zorder);
+	if (r)
+		return r;
+
+	ovl->get_overlay_info(ovl, &info);
+
+	info.zorder = zorder;
+
+	r = ovl->set_overlay_info(ovl, &info);
+	if (r)
+		return r;
+
+	if (ovl->manager) {
+		r = ovl->manager->apply(ovl->manager);
+		if (r)
+			return r;
+	}
+
+	return size;
+}
+
+struct overlay_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct omap_overlay *, char *);
+	ssize_t	(*store)(struct omap_overlay *, const char *, size_t);
+};
+
+#define OVERLAY_ATTR(_name, _mode, _show, _store) \
+	struct overlay_attribute overlay_attr_##_name = \
+	__ATTR(_name, _mode, _show, _store)
+
+static OVERLAY_ATTR(name, S_IRUGO, overlay_name_show, NULL);
+static OVERLAY_ATTR(manager, S_IRUGO|S_IWUSR,
+		overlay_manager_show, overlay_manager_store);
+static OVERLAY_ATTR(input_size, S_IRUGO, overlay_input_size_show, NULL);
+static OVERLAY_ATTR(screen_width, S_IRUGO, overlay_screen_width_show, NULL);
+static OVERLAY_ATTR(position, S_IRUGO|S_IWUSR,
+		overlay_position_show, overlay_position_store);
+static OVERLAY_ATTR(output_size, S_IRUGO|S_IWUSR,
+		overlay_output_size_show, overlay_output_size_store);
+static OVERLAY_ATTR(enabled, S_IRUGO|S_IWUSR,
+		overlay_enabled_show, overlay_enabled_store);
+static OVERLAY_ATTR(global_alpha, S_IRUGO|S_IWUSR,
+		overlay_global_alpha_show, overlay_global_alpha_store);
+static OVERLAY_ATTR(pre_mult_alpha, S_IRUGO|S_IWUSR,
+		overlay_pre_mult_alpha_show,
+		overlay_pre_mult_alpha_store);
+static OVERLAY_ATTR(zorder, S_IRUGO|S_IWUSR,
+		overlay_zorder_show, overlay_zorder_store);
+
+static struct attribute *overlay_sysfs_attrs[] = {
+	&overlay_attr_name.attr,
+	&overlay_attr_manager.attr,
+	&overlay_attr_input_size.attr,
+	&overlay_attr_screen_width.attr,
+	&overlay_attr_position.attr,
+	&overlay_attr_output_size.attr,
+	&overlay_attr_enabled.attr,
+	&overlay_attr_global_alpha.attr,
+	&overlay_attr_pre_mult_alpha.attr,
+	&overlay_attr_zorder.attr,
+	NULL
+};
+
+static ssize_t overlay_attr_show(struct kobject *kobj, struct attribute *attr,
+		char *buf)
+{
+	struct omap_overlay *overlay;
+	struct overlay_attribute *overlay_attr;
+
+	overlay = container_of(kobj, struct omap_overlay, kobj);
+	overlay_attr = container_of(attr, struct overlay_attribute, attr);
+
+	if (!overlay_attr->show)
+		return -ENOENT;
+
+	return overlay_attr->show(overlay, buf);
+}
+
+static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr,
+		const char *buf, size_t size)
+{
+	struct omap_overlay *overlay;
+	struct overlay_attribute *overlay_attr;
+
+	overlay = container_of(kobj, struct omap_overlay, kobj);
+	overlay_attr = container_of(attr, struct overlay_attribute, attr);
+
+	if (!overlay_attr->store)
+		return -ENOENT;
+
+	return overlay_attr->store(overlay, buf, size);
+}
+
+static const struct sysfs_ops overlay_sysfs_ops = {
+	.show = overlay_attr_show,
+	.store = overlay_attr_store,
+};
+
+static struct kobj_type overlay_ktype = {
+	.sysfs_ops = &overlay_sysfs_ops,
+	.default_attrs = overlay_sysfs_attrs,
+};
+
+int dss_overlay_kobj_init(struct omap_overlay *ovl,
+		struct platform_device *pdev)
+{
+	return kobject_init_and_add(&ovl->kobj, &overlay_ktype,
+			&pdev->dev.kobj, "overlay%d", ovl->id);
+}
+
+void dss_overlay_kobj_uninit(struct omap_overlay *ovl)
+{
+	kobject_del(&ovl->kobj);
+	kobject_put(&ovl->kobj);
+}
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 94e74be0788d..e3d406875afd 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -26,7 +26,6 @@
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/sysfs.h>
-#include <linux/kobject.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
@@ -39,417 +38,6 @@
 static int num_overlays;
 static struct omap_overlay *overlays;
 
-static ssize_t overlay_name_show(struct omap_overlay *ovl, char *buf)
-{
-	return snprintf(buf, PAGE_SIZE, "%s\n", ovl->name);
-}
-
-static ssize_t overlay_manager_show(struct omap_overlay *ovl, char *buf)
-{
-	return snprintf(buf, PAGE_SIZE, "%s\n",
-			ovl->manager ? ovl->manager->name : "<none>");
-}
-
-static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf,
-		size_t size)
-{
-	int i, r;
-	struct omap_overlay_manager *mgr = NULL;
-	struct omap_overlay_manager *old_mgr;
-	int len = size;
-
-	if (buf[size-1] == '\n')
-		--len;
-
-	if (len > 0) {
-		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
-			mgr = omap_dss_get_overlay_manager(i);
-
-			if (sysfs_streq(buf, mgr->name))
-				break;
-
-			mgr = NULL;
-		}
-	}
-
-	if (len > 0 && mgr == NULL)
-		return -EINVAL;
-
-	if (mgr)
-		DSSDBG("manager %s found\n", mgr->name);
-
-	if (mgr == ovl->manager)
-		return size;
-
-	old_mgr = ovl->manager;
-
-	r = dispc_runtime_get();
-	if (r)
-		return r;
-
-	/* detach old manager */
-	if (old_mgr) {
-		r = ovl->unset_manager(ovl);
-		if (r) {
-			DSSERR("detach failed\n");
-			goto err;
-		}
-
-		r = old_mgr->apply(old_mgr);
-		if (r)
-			goto err;
-	}
-
-	if (mgr) {
-		r = ovl->set_manager(ovl, mgr);
-		if (r) {
-			DSSERR("Failed to attach overlay\n");
-			goto err;
-		}
-
-		r = mgr->apply(mgr);
-		if (r)
-			goto err;
-	}
-
-	dispc_runtime_put();
-
-	return size;
-
-err:
-	dispc_runtime_put();
-	return r;
-}
-
-static ssize_t overlay_input_size_show(struct omap_overlay *ovl, char *buf)
-{
-	struct omap_overlay_info info;
-
-	ovl->get_overlay_info(ovl, &info);
-
-	return snprintf(buf, PAGE_SIZE, "%d,%d\n",
-			info.width, info.height);
-}
-
-static ssize_t overlay_screen_width_show(struct omap_overlay *ovl, char *buf)
-{
-	struct omap_overlay_info info;
-
-	ovl->get_overlay_info(ovl, &info);
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", info.screen_width);
-}
-
-static ssize_t overlay_position_show(struct omap_overlay *ovl, char *buf)
-{
-	struct omap_overlay_info info;
-
-	ovl->get_overlay_info(ovl, &info);
-
-	return snprintf(buf, PAGE_SIZE, "%d,%d\n",
-			info.pos_x, info.pos_y);
-}
-
-static ssize_t overlay_position_store(struct omap_overlay *ovl,
-		const char *buf, size_t size)
-{
-	int r;
-	char *last;
-	struct omap_overlay_info info;
-
-	ovl->get_overlay_info(ovl, &info);
-
-	info.pos_x = simple_strtoul(buf, &last, 10);
-	++last;
-	if (last - buf >= size)
-		return -EINVAL;
-
-	info.pos_y = simple_strtoul(last, &last, 10);
-
-	r = ovl->set_overlay_info(ovl, &info);
-	if (r)
-		return r;
-
-	if (ovl->manager) {
-		r = ovl->manager->apply(ovl->manager);
-		if (r)
-			return r;
-	}
-
-	return size;
-}
-
-static ssize_t overlay_output_size_show(struct omap_overlay *ovl, char *buf)
-{
-	struct omap_overlay_info info;
-
-	ovl->get_overlay_info(ovl, &info);
-
-	return snprintf(buf, PAGE_SIZE, "%d,%d\n",
-			info.out_width, info.out_height);
-}
-
-static ssize_t overlay_output_size_store(struct omap_overlay *ovl,
-		const char *buf, size_t size)
-{
-	int r;
-	char *last;
-	struct omap_overlay_info info;
-
-	ovl->get_overlay_info(ovl, &info);
-
-	info.out_width = simple_strtoul(buf, &last, 10);
-	++last;
-	if (last - buf >= size)
-		return -EINVAL;
-
-	info.out_height = simple_strtoul(last, &last, 10);
-
-	r = ovl->set_overlay_info(ovl, &info);
-	if (r)
-		return r;
-
-	if (ovl->manager) {
-		r = ovl->manager->apply(ovl->manager);
-		if (r)
-			return r;
-	}
-
-	return size;
-}
-
-static ssize_t overlay_enabled_show(struct omap_overlay *ovl, char *buf)
-{
-	return snprintf(buf, PAGE_SIZE, "%d\n", ovl->is_enabled(ovl));
-}
-
-static ssize_t overlay_enabled_store(struct omap_overlay *ovl, const char *buf,
-		size_t size)
-{
-	int r;
-	bool enable;
-
-	r = strtobool(buf, &enable);
-	if (r)
-		return r;
-
-	if (enable)
-		r = ovl->enable(ovl);
-	else
-		r = ovl->disable(ovl);
-
-	if (r)
-		return r;
-
-	return size;
-}
-
-static ssize_t overlay_global_alpha_show(struct omap_overlay *ovl, char *buf)
-{
-	struct omap_overlay_info info;
-
-	ovl->get_overlay_info(ovl, &info);
-
-	return snprintf(buf, PAGE_SIZE, "%d\n",
-			info.global_alpha);
-}
-
-static ssize_t overlay_global_alpha_store(struct omap_overlay *ovl,
-		const char *buf, size_t size)
-{
-	int r;
-	u8 alpha;
-	struct omap_overlay_info info;
-
-	if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) == 0)
-		return -ENODEV;
-
-	r = kstrtou8(buf, 0, &alpha);
-	if (r)
-		return r;
-
-	ovl->get_overlay_info(ovl, &info);
-
-	info.global_alpha = alpha;
-
-	r = ovl->set_overlay_info(ovl, &info);
-	if (r)
-		return r;
-
-	if (ovl->manager) {
-		r = ovl->manager->apply(ovl->manager);
-		if (r)
-			return r;
-	}
-
-	return size;
-}
-
-static ssize_t overlay_pre_mult_alpha_show(struct omap_overlay *ovl,
-		char *buf)
-{
-	struct omap_overlay_info info;
-
-	ovl->get_overlay_info(ovl, &info);
-
-	return snprintf(buf, PAGE_SIZE, "%d\n",
-			info.pre_mult_alpha);
-}
-
-static ssize_t overlay_pre_mult_alpha_store(struct omap_overlay *ovl,
-		const char *buf, size_t size)
-{
-	int r;
-	u8 alpha;
-	struct omap_overlay_info info;
-
-	if ((ovl->caps & OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA) == 0)
-		return -ENODEV;
-
-	r = kstrtou8(buf, 0, &alpha);
-	if (r)
-		return r;
-
-	ovl->get_overlay_info(ovl, &info);
-
-	info.pre_mult_alpha = alpha;
-
-	r = ovl->set_overlay_info(ovl, &info);
-	if (r)
-		return r;
-
-	if (ovl->manager) {
-		r = ovl->manager->apply(ovl->manager);
-		if (r)
-			return r;
-	}
-
-	return size;
-}
-
-static ssize_t overlay_zorder_show(struct omap_overlay *ovl, char *buf)
-{
-	struct omap_overlay_info info;
-
-	ovl->get_overlay_info(ovl, &info);
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", info.zorder);
-}
-
-static ssize_t overlay_zorder_store(struct omap_overlay *ovl,
-		const char *buf, size_t size)
-{
-	int r;
-	u8 zorder;
-	struct omap_overlay_info info;
-
-	if ((ovl->caps & OMAP_DSS_OVL_CAP_ZORDER) == 0)
-		return -ENODEV;
-
-	r = kstrtou8(buf, 0, &zorder);
-	if (r)
-		return r;
-
-	ovl->get_overlay_info(ovl, &info);
-
-	info.zorder = zorder;
-
-	r = ovl->set_overlay_info(ovl, &info);
-	if (r)
-		return r;
-
-	if (ovl->manager) {
-		r = ovl->manager->apply(ovl->manager);
-		if (r)
-			return r;
-	}
-
-	return size;
-}
-
-struct overlay_attribute {
-	struct attribute attr;
-	ssize_t (*show)(struct omap_overlay *, char *);
-	ssize_t	(*store)(struct omap_overlay *, const char *, size_t);
-};
-
-#define OVERLAY_ATTR(_name, _mode, _show, _store) \
-	struct overlay_attribute overlay_attr_##_name = \
-	__ATTR(_name, _mode, _show, _store)
-
-static OVERLAY_ATTR(name, S_IRUGO, overlay_name_show, NULL);
-static OVERLAY_ATTR(manager, S_IRUGO|S_IWUSR,
-		overlay_manager_show, overlay_manager_store);
-static OVERLAY_ATTR(input_size, S_IRUGO, overlay_input_size_show, NULL);
-static OVERLAY_ATTR(screen_width, S_IRUGO, overlay_screen_width_show, NULL);
-static OVERLAY_ATTR(position, S_IRUGO|S_IWUSR,
-		overlay_position_show, overlay_position_store);
-static OVERLAY_ATTR(output_size, S_IRUGO|S_IWUSR,
-		overlay_output_size_show, overlay_output_size_store);
-static OVERLAY_ATTR(enabled, S_IRUGO|S_IWUSR,
-		overlay_enabled_show, overlay_enabled_store);
-static OVERLAY_ATTR(global_alpha, S_IRUGO|S_IWUSR,
-		overlay_global_alpha_show, overlay_global_alpha_store);
-static OVERLAY_ATTR(pre_mult_alpha, S_IRUGO|S_IWUSR,
-		overlay_pre_mult_alpha_show,
-		overlay_pre_mult_alpha_store);
-static OVERLAY_ATTR(zorder, S_IRUGO|S_IWUSR,
-		overlay_zorder_show, overlay_zorder_store);
-
-static struct attribute *overlay_sysfs_attrs[] = {
-	&overlay_attr_name.attr,
-	&overlay_attr_manager.attr,
-	&overlay_attr_input_size.attr,
-	&overlay_attr_screen_width.attr,
-	&overlay_attr_position.attr,
-	&overlay_attr_output_size.attr,
-	&overlay_attr_enabled.attr,
-	&overlay_attr_global_alpha.attr,
-	&overlay_attr_pre_mult_alpha.attr,
-	&overlay_attr_zorder.attr,
-	NULL
-};
-
-static ssize_t overlay_attr_show(struct kobject *kobj, struct attribute *attr,
-		char *buf)
-{
-	struct omap_overlay *overlay;
-	struct overlay_attribute *overlay_attr;
-
-	overlay = container_of(kobj, struct omap_overlay, kobj);
-	overlay_attr = container_of(attr, struct overlay_attribute, attr);
-
-	if (!overlay_attr->show)
-		return -ENOENT;
-
-	return overlay_attr->show(overlay, buf);
-}
-
-static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr,
-		const char *buf, size_t size)
-{
-	struct omap_overlay *overlay;
-	struct overlay_attribute *overlay_attr;
-
-	overlay = container_of(kobj, struct omap_overlay, kobj);
-	overlay_attr = container_of(attr, struct overlay_attribute, attr);
-
-	if (!overlay_attr->store)
-		return -ENOENT;
-
-	return overlay_attr->store(overlay, buf, size);
-}
-
-static const struct sysfs_ops overlay_sysfs_ops = {
-	.show = overlay_attr_show,
-	.store = overlay_attr_store,
-};
-
-static struct kobj_type overlay_ktype = {
-	.sysfs_ops = &overlay_sysfs_ops,
-	.default_attrs = overlay_sysfs_attrs,
-};
-
 int omap_dss_get_num_overlays(void)
 {
 	return num_overlays;
@@ -511,9 +99,7 @@ void dss_init_overlays(struct platform_device *pdev)
 		ovl->supported_modes =
 			dss_feat_get_supported_color_modes(ovl->id);
 
-		r = kobject_init_and_add(&ovl->kobj, &overlay_ktype,
-				&pdev->dev.kobj, "overlay%d", i);
-
+		r = dss_overlay_kobj_init(ovl, pdev);
 		if (r)
 			DSSERR("failed to create sysfs file\n");
 	}
@@ -594,9 +180,7 @@ void dss_uninit_overlays(struct platform_device *pdev)
 
 	for (i = 0; i < num_overlays; ++i) {
 		struct omap_overlay *ovl = &overlays[i];
-
-		kobject_del(&ovl->kobj);
-		kobject_put(&ovl->kobj);
+		dss_overlay_kobj_uninit(ovl);
 	}
 
 	kfree(overlays);
-- 
cgit v1.2.1


From f6a0492ee0f243415b03632826b80a8c8ae3680b Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 6 Aug 2012 14:44:09 +0300
Subject: OMAPDSS: split manager sysfs code

Separate sysfs code for managers to a separate file. This is a bit
cleaner, and will allow us later to easily switch off the sysfs support
via Kconfig option.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/Makefile        |   2 +-
 drivers/video/omap2/dss/dss.h           |   4 +
 drivers/video/omap2/dss/manager-sysfs.c | 499 ++++++++++++++++++++++++++++++++
 drivers/video/omap2/dss/manager.c       | 462 +----------------------------
 4 files changed, 506 insertions(+), 461 deletions(-)
 create mode 100644 drivers/video/omap2/dss/manager-sysfs.c

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile
index 927d5ce48e75..00a6eb566bb6 100644
--- a/drivers/video/omap2/dss/Makefile
+++ b/drivers/video/omap2/dss/Makefile
@@ -1,6 +1,6 @@
 obj-$(CONFIG_OMAP2_DSS) += omapdss.o
 omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
-	manager.o overlay.o overlay-sysfs.o apply.o
+	manager.o manager-sysfs.o overlay.o overlay-sysfs.o apply.o
 omapdss-$(CONFIG_OMAP2_DSS_DPI) += dpi.o
 omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o
 omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o venc_panel.o
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 11b053e53867..5e9fd7691728 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -254,6 +254,10 @@ static inline bool dss_mgr_is_lcd(enum omap_channel id)
 		return false;
 }
 
+int dss_manager_kobj_init(struct omap_overlay_manager *mgr,
+		struct platform_device *pdev);
+void dss_manager_kobj_uninit(struct omap_overlay_manager *mgr);
+
 /* overlay */
 void dss_init_overlays(struct platform_device *pdev);
 void dss_uninit_overlays(struct platform_device *pdev);
diff --git a/drivers/video/omap2/dss/manager-sysfs.c b/drivers/video/omap2/dss/manager-sysfs.c
new file mode 100644
index 000000000000..9b875fbe757e
--- /dev/null
+++ b/drivers/video/omap2/dss/manager-sysfs.c
@@ -0,0 +1,499 @@
+/*
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "MANAGER"
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/jiffies.h>
+
+#include <video/omapdss.h>
+
+#include "dss.h"
+#include "dss_features.h"
+
+static ssize_t manager_name_show(struct omap_overlay_manager *mgr, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n", mgr->name);
+}
+
+static ssize_t manager_display_show(struct omap_overlay_manager *mgr, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			mgr->device ? mgr->device->name : "<none>");
+}
+
+static ssize_t manager_display_store(struct omap_overlay_manager *mgr,
+		const char *buf, size_t size)
+{
+	int r = 0;
+	size_t len = size;
+	struct omap_dss_device *dssdev = NULL;
+
+	int match(struct omap_dss_device *dssdev, void *data)
+	{
+		const char *str = data;
+		return sysfs_streq(dssdev->name, str);
+	}
+
+	if (buf[size-1] == '\n')
+		--len;
+
+	if (len > 0)
+		dssdev = omap_dss_find_device((void *)buf, match);
+
+	if (len > 0 && dssdev == NULL)
+		return -EINVAL;
+
+	if (dssdev)
+		DSSDBG("display %s found\n", dssdev->name);
+
+	if (mgr->device) {
+		r = mgr->unset_device(mgr);
+		if (r) {
+			DSSERR("failed to unset display\n");
+			goto put_device;
+		}
+	}
+
+	if (dssdev) {
+		r = mgr->set_device(mgr, dssdev);
+		if (r) {
+			DSSERR("failed to set manager\n");
+			goto put_device;
+		}
+
+		r = mgr->apply(mgr);
+		if (r) {
+			DSSERR("failed to apply dispc config\n");
+			goto put_device;
+		}
+	}
+
+put_device:
+	if (dssdev)
+		omap_dss_put_device(dssdev);
+
+	return r ? r : size;
+}
+
+static ssize_t manager_default_color_show(struct omap_overlay_manager *mgr,
+					  char *buf)
+{
+	struct omap_overlay_manager_info info;
+
+	mgr->get_manager_info(mgr, &info);
+
+	return snprintf(buf, PAGE_SIZE, "%#x\n", info.default_color);
+}
+
+static ssize_t manager_default_color_store(struct omap_overlay_manager *mgr,
+					   const char *buf, size_t size)
+{
+	struct omap_overlay_manager_info info;
+	u32 color;
+	int r;
+
+	r = kstrtouint(buf, 0, &color);
+	if (r)
+		return r;
+
+	mgr->get_manager_info(mgr, &info);
+
+	info.default_color = color;
+
+	r = mgr->set_manager_info(mgr, &info);
+	if (r)
+		return r;
+
+	r = mgr->apply(mgr);
+	if (r)
+		return r;
+
+	return size;
+}
+
+static const char *trans_key_type_str[] = {
+	"gfx-destination",
+	"video-source",
+};
+
+static ssize_t manager_trans_key_type_show(struct omap_overlay_manager *mgr,
+					   char *buf)
+{
+	enum omap_dss_trans_key_type key_type;
+	struct omap_overlay_manager_info info;
+
+	mgr->get_manager_info(mgr, &info);
+
+	key_type = info.trans_key_type;
+	BUG_ON(key_type >= ARRAY_SIZE(trans_key_type_str));
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", trans_key_type_str[key_type]);
+}
+
+static ssize_t manager_trans_key_type_store(struct omap_overlay_manager *mgr,
+					    const char *buf, size_t size)
+{
+	enum omap_dss_trans_key_type key_type;
+	struct omap_overlay_manager_info info;
+	int r;
+
+	for (key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
+			key_type < ARRAY_SIZE(trans_key_type_str); key_type++) {
+		if (sysfs_streq(buf, trans_key_type_str[key_type]))
+			break;
+	}
+
+	if (key_type == ARRAY_SIZE(trans_key_type_str))
+		return -EINVAL;
+
+	mgr->get_manager_info(mgr, &info);
+
+	info.trans_key_type = key_type;
+
+	r = mgr->set_manager_info(mgr, &info);
+	if (r)
+		return r;
+
+	r = mgr->apply(mgr);
+	if (r)
+		return r;
+
+	return size;
+}
+
+static ssize_t manager_trans_key_value_show(struct omap_overlay_manager *mgr,
+					    char *buf)
+{
+	struct omap_overlay_manager_info info;
+
+	mgr->get_manager_info(mgr, &info);
+
+	return snprintf(buf, PAGE_SIZE, "%#x\n", info.trans_key);
+}
+
+static ssize_t manager_trans_key_value_store(struct omap_overlay_manager *mgr,
+					     const char *buf, size_t size)
+{
+	struct omap_overlay_manager_info info;
+	u32 key_value;
+	int r;
+
+	r = kstrtouint(buf, 0, &key_value);
+	if (r)
+		return r;
+
+	mgr->get_manager_info(mgr, &info);
+
+	info.trans_key = key_value;
+
+	r = mgr->set_manager_info(mgr, &info);
+	if (r)
+		return r;
+
+	r = mgr->apply(mgr);
+	if (r)
+		return r;
+
+	return size;
+}
+
+static ssize_t manager_trans_key_enabled_show(struct omap_overlay_manager *mgr,
+					      char *buf)
+{
+	struct omap_overlay_manager_info info;
+
+	mgr->get_manager_info(mgr, &info);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", info.trans_enabled);
+}
+
+static ssize_t manager_trans_key_enabled_store(struct omap_overlay_manager *mgr,
+					       const char *buf, size_t size)
+{
+	struct omap_overlay_manager_info info;
+	bool enable;
+	int r;
+
+	r = strtobool(buf, &enable);
+	if (r)
+		return r;
+
+	mgr->get_manager_info(mgr, &info);
+
+	info.trans_enabled = enable;
+
+	r = mgr->set_manager_info(mgr, &info);
+	if (r)
+		return r;
+
+	r = mgr->apply(mgr);
+	if (r)
+		return r;
+
+	return size;
+}
+
+static ssize_t manager_alpha_blending_enabled_show(
+		struct omap_overlay_manager *mgr, char *buf)
+{
+	struct omap_overlay_manager_info info;
+
+	mgr->get_manager_info(mgr, &info);
+
+	WARN_ON(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER));
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+		info.partial_alpha_enabled);
+}
+
+static ssize_t manager_alpha_blending_enabled_store(
+		struct omap_overlay_manager *mgr,
+		const char *buf, size_t size)
+{
+	struct omap_overlay_manager_info info;
+	bool enable;
+	int r;
+
+	WARN_ON(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER));
+
+	r = strtobool(buf, &enable);
+	if (r)
+		return r;
+
+	mgr->get_manager_info(mgr, &info);
+
+	info.partial_alpha_enabled = enable;
+
+	r = mgr->set_manager_info(mgr, &info);
+	if (r)
+		return r;
+
+	r = mgr->apply(mgr);
+	if (r)
+		return r;
+
+	return size;
+}
+
+static ssize_t manager_cpr_enable_show(struct omap_overlay_manager *mgr,
+		char *buf)
+{
+	struct omap_overlay_manager_info info;
+
+	mgr->get_manager_info(mgr, &info);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", info.cpr_enable);
+}
+
+static ssize_t manager_cpr_enable_store(struct omap_overlay_manager *mgr,
+		const char *buf, size_t size)
+{
+	struct omap_overlay_manager_info info;
+	int r;
+	bool enable;
+
+	if (!dss_has_feature(FEAT_CPR))
+		return -ENODEV;
+
+	r = strtobool(buf, &enable);
+	if (r)
+		return r;
+
+	mgr->get_manager_info(mgr, &info);
+
+	if (info.cpr_enable == enable)
+		return size;
+
+	info.cpr_enable = enable;
+
+	r = mgr->set_manager_info(mgr, &info);
+	if (r)
+		return r;
+
+	r = mgr->apply(mgr);
+	if (r)
+		return r;
+
+	return size;
+}
+
+static ssize_t manager_cpr_coef_show(struct omap_overlay_manager *mgr,
+		char *buf)
+{
+	struct omap_overlay_manager_info info;
+
+	mgr->get_manager_info(mgr, &info);
+
+	return snprintf(buf, PAGE_SIZE,
+			"%d %d %d %d %d %d %d %d %d\n",
+			info.cpr_coefs.rr,
+			info.cpr_coefs.rg,
+			info.cpr_coefs.rb,
+			info.cpr_coefs.gr,
+			info.cpr_coefs.gg,
+			info.cpr_coefs.gb,
+			info.cpr_coefs.br,
+			info.cpr_coefs.bg,
+			info.cpr_coefs.bb);
+}
+
+static ssize_t manager_cpr_coef_store(struct omap_overlay_manager *mgr,
+		const char *buf, size_t size)
+{
+	struct omap_overlay_manager_info info;
+	struct omap_dss_cpr_coefs coefs;
+	int r, i;
+	s16 *arr;
+
+	if (!dss_has_feature(FEAT_CPR))
+		return -ENODEV;
+
+	if (sscanf(buf, "%hd %hd %hd %hd %hd %hd %hd %hd %hd",
+				&coefs.rr, &coefs.rg, &coefs.rb,
+				&coefs.gr, &coefs.gg, &coefs.gb,
+				&coefs.br, &coefs.bg, &coefs.bb) != 9)
+		return -EINVAL;
+
+	arr = (s16[]){ coefs.rr, coefs.rg, coefs.rb,
+		coefs.gr, coefs.gg, coefs.gb,
+		coefs.br, coefs.bg, coefs.bb };
+
+	for (i = 0; i < 9; ++i) {
+		if (arr[i] < -512 || arr[i] > 511)
+			return -EINVAL;
+	}
+
+	mgr->get_manager_info(mgr, &info);
+
+	info.cpr_coefs = coefs;
+
+	r = mgr->set_manager_info(mgr, &info);
+	if (r)
+		return r;
+
+	r = mgr->apply(mgr);
+	if (r)
+		return r;
+
+	return size;
+}
+
+struct manager_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct omap_overlay_manager *, char *);
+	ssize_t	(*store)(struct omap_overlay_manager *, const char *, size_t);
+};
+
+#define MANAGER_ATTR(_name, _mode, _show, _store) \
+	struct manager_attribute manager_attr_##_name = \
+	__ATTR(_name, _mode, _show, _store)
+
+static MANAGER_ATTR(name, S_IRUGO, manager_name_show, NULL);
+static MANAGER_ATTR(display, S_IRUGO|S_IWUSR,
+		manager_display_show, manager_display_store);
+static MANAGER_ATTR(default_color, S_IRUGO|S_IWUSR,
+		manager_default_color_show, manager_default_color_store);
+static MANAGER_ATTR(trans_key_type, S_IRUGO|S_IWUSR,
+		manager_trans_key_type_show, manager_trans_key_type_store);
+static MANAGER_ATTR(trans_key_value, S_IRUGO|S_IWUSR,
+		manager_trans_key_value_show, manager_trans_key_value_store);
+static MANAGER_ATTR(trans_key_enabled, S_IRUGO|S_IWUSR,
+		manager_trans_key_enabled_show,
+		manager_trans_key_enabled_store);
+static MANAGER_ATTR(alpha_blending_enabled, S_IRUGO|S_IWUSR,
+		manager_alpha_blending_enabled_show,
+		manager_alpha_blending_enabled_store);
+static MANAGER_ATTR(cpr_enable, S_IRUGO|S_IWUSR,
+		manager_cpr_enable_show,
+		manager_cpr_enable_store);
+static MANAGER_ATTR(cpr_coef, S_IRUGO|S_IWUSR,
+		manager_cpr_coef_show,
+		manager_cpr_coef_store);
+
+
+static struct attribute *manager_sysfs_attrs[] = {
+	&manager_attr_name.attr,
+	&manager_attr_display.attr,
+	&manager_attr_default_color.attr,
+	&manager_attr_trans_key_type.attr,
+	&manager_attr_trans_key_value.attr,
+	&manager_attr_trans_key_enabled.attr,
+	&manager_attr_alpha_blending_enabled.attr,
+	&manager_attr_cpr_enable.attr,
+	&manager_attr_cpr_coef.attr,
+	NULL
+};
+
+static ssize_t manager_attr_show(struct kobject *kobj, struct attribute *attr,
+		char *buf)
+{
+	struct omap_overlay_manager *manager;
+	struct manager_attribute *manager_attr;
+
+	manager = container_of(kobj, struct omap_overlay_manager, kobj);
+	manager_attr = container_of(attr, struct manager_attribute, attr);
+
+	if (!manager_attr->show)
+		return -ENOENT;
+
+	return manager_attr->show(manager, buf);
+}
+
+static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr,
+		const char *buf, size_t size)
+{
+	struct omap_overlay_manager *manager;
+	struct manager_attribute *manager_attr;
+
+	manager = container_of(kobj, struct omap_overlay_manager, kobj);
+	manager_attr = container_of(attr, struct manager_attribute, attr);
+
+	if (!manager_attr->store)
+		return -ENOENT;
+
+	return manager_attr->store(manager, buf, size);
+}
+
+static const struct sysfs_ops manager_sysfs_ops = {
+	.show = manager_attr_show,
+	.store = manager_attr_store,
+};
+
+static struct kobj_type manager_ktype = {
+	.sysfs_ops = &manager_sysfs_ops,
+	.default_attrs = manager_sysfs_attrs,
+};
+
+int dss_manager_kobj_init(struct omap_overlay_manager *mgr,
+		struct platform_device *pdev)
+{
+	return kobject_init_and_add(&mgr->kobj, &manager_ktype,
+			&pdev->dev.kobj, "manager%d", mgr->id);
+}
+
+void dss_manager_kobj_uninit(struct omap_overlay_manager *mgr)
+{
+	kobject_del(&mgr->kobj);
+	kobject_put(&mgr->kobj);
+}
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 53710fadc82d..383314f222b0 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -36,460 +36,6 @@
 static int num_managers;
 static struct omap_overlay_manager *managers;
 
-static ssize_t manager_name_show(struct omap_overlay_manager *mgr, char *buf)
-{
-	return snprintf(buf, PAGE_SIZE, "%s\n", mgr->name);
-}
-
-static ssize_t manager_display_show(struct omap_overlay_manager *mgr, char *buf)
-{
-	return snprintf(buf, PAGE_SIZE, "%s\n",
-			mgr->device ? mgr->device->name : "<none>");
-}
-
-static ssize_t manager_display_store(struct omap_overlay_manager *mgr,
-		const char *buf, size_t size)
-{
-	int r = 0;
-	size_t len = size;
-	struct omap_dss_device *dssdev = NULL;
-
-	int match(struct omap_dss_device *dssdev, void *data)
-	{
-		const char *str = data;
-		return sysfs_streq(dssdev->name, str);
-	}
-
-	if (buf[size-1] == '\n')
-		--len;
-
-	if (len > 0)
-		dssdev = omap_dss_find_device((void *)buf, match);
-
-	if (len > 0 && dssdev == NULL)
-		return -EINVAL;
-
-	if (dssdev)
-		DSSDBG("display %s found\n", dssdev->name);
-
-	if (mgr->device) {
-		r = mgr->unset_device(mgr);
-		if (r) {
-			DSSERR("failed to unset display\n");
-			goto put_device;
-		}
-	}
-
-	if (dssdev) {
-		r = mgr->set_device(mgr, dssdev);
-		if (r) {
-			DSSERR("failed to set manager\n");
-			goto put_device;
-		}
-
-		r = mgr->apply(mgr);
-		if (r) {
-			DSSERR("failed to apply dispc config\n");
-			goto put_device;
-		}
-	}
-
-put_device:
-	if (dssdev)
-		omap_dss_put_device(dssdev);
-
-	return r ? r : size;
-}
-
-static ssize_t manager_default_color_show(struct omap_overlay_manager *mgr,
-					  char *buf)
-{
-	struct omap_overlay_manager_info info;
-
-	mgr->get_manager_info(mgr, &info);
-
-	return snprintf(buf, PAGE_SIZE, "%#x\n", info.default_color);
-}
-
-static ssize_t manager_default_color_store(struct omap_overlay_manager *mgr,
-					   const char *buf, size_t size)
-{
-	struct omap_overlay_manager_info info;
-	u32 color;
-	int r;
-
-	r = kstrtouint(buf, 0, &color);
-	if (r)
-		return r;
-
-	mgr->get_manager_info(mgr, &info);
-
-	info.default_color = color;
-
-	r = mgr->set_manager_info(mgr, &info);
-	if (r)
-		return r;
-
-	r = mgr->apply(mgr);
-	if (r)
-		return r;
-
-	return size;
-}
-
-static const char *trans_key_type_str[] = {
-	"gfx-destination",
-	"video-source",
-};
-
-static ssize_t manager_trans_key_type_show(struct omap_overlay_manager *mgr,
-					   char *buf)
-{
-	enum omap_dss_trans_key_type key_type;
-	struct omap_overlay_manager_info info;
-
-	mgr->get_manager_info(mgr, &info);
-
-	key_type = info.trans_key_type;
-	BUG_ON(key_type >= ARRAY_SIZE(trans_key_type_str));
-
-	return snprintf(buf, PAGE_SIZE, "%s\n", trans_key_type_str[key_type]);
-}
-
-static ssize_t manager_trans_key_type_store(struct omap_overlay_manager *mgr,
-					    const char *buf, size_t size)
-{
-	enum omap_dss_trans_key_type key_type;
-	struct omap_overlay_manager_info info;
-	int r;
-
-	for (key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
-			key_type < ARRAY_SIZE(trans_key_type_str); key_type++) {
-		if (sysfs_streq(buf, trans_key_type_str[key_type]))
-			break;
-	}
-
-	if (key_type == ARRAY_SIZE(trans_key_type_str))
-		return -EINVAL;
-
-	mgr->get_manager_info(mgr, &info);
-
-	info.trans_key_type = key_type;
-
-	r = mgr->set_manager_info(mgr, &info);
-	if (r)
-		return r;
-
-	r = mgr->apply(mgr);
-	if (r)
-		return r;
-
-	return size;
-}
-
-static ssize_t manager_trans_key_value_show(struct omap_overlay_manager *mgr,
-					    char *buf)
-{
-	struct omap_overlay_manager_info info;
-
-	mgr->get_manager_info(mgr, &info);
-
-	return snprintf(buf, PAGE_SIZE, "%#x\n", info.trans_key);
-}
-
-static ssize_t manager_trans_key_value_store(struct omap_overlay_manager *mgr,
-					     const char *buf, size_t size)
-{
-	struct omap_overlay_manager_info info;
-	u32 key_value;
-	int r;
-
-	r = kstrtouint(buf, 0, &key_value);
-	if (r)
-		return r;
-
-	mgr->get_manager_info(mgr, &info);
-
-	info.trans_key = key_value;
-
-	r = mgr->set_manager_info(mgr, &info);
-	if (r)
-		return r;
-
-	r = mgr->apply(mgr);
-	if (r)
-		return r;
-
-	return size;
-}
-
-static ssize_t manager_trans_key_enabled_show(struct omap_overlay_manager *mgr,
-					      char *buf)
-{
-	struct omap_overlay_manager_info info;
-
-	mgr->get_manager_info(mgr, &info);
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", info.trans_enabled);
-}
-
-static ssize_t manager_trans_key_enabled_store(struct omap_overlay_manager *mgr,
-					       const char *buf, size_t size)
-{
-	struct omap_overlay_manager_info info;
-	bool enable;
-	int r;
-
-	r = strtobool(buf, &enable);
-	if (r)
-		return r;
-
-	mgr->get_manager_info(mgr, &info);
-
-	info.trans_enabled = enable;
-
-	r = mgr->set_manager_info(mgr, &info);
-	if (r)
-		return r;
-
-	r = mgr->apply(mgr);
-	if (r)
-		return r;
-
-	return size;
-}
-
-static ssize_t manager_alpha_blending_enabled_show(
-		struct omap_overlay_manager *mgr, char *buf)
-{
-	struct omap_overlay_manager_info info;
-
-	mgr->get_manager_info(mgr, &info);
-
-	WARN_ON(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER));
-
-	return snprintf(buf, PAGE_SIZE, "%d\n",
-		info.partial_alpha_enabled);
-}
-
-static ssize_t manager_alpha_blending_enabled_store(
-		struct omap_overlay_manager *mgr,
-		const char *buf, size_t size)
-{
-	struct omap_overlay_manager_info info;
-	bool enable;
-	int r;
-
-	WARN_ON(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER));
-
-	r = strtobool(buf, &enable);
-	if (r)
-		return r;
-
-	mgr->get_manager_info(mgr, &info);
-
-	info.partial_alpha_enabled = enable;
-
-	r = mgr->set_manager_info(mgr, &info);
-	if (r)
-		return r;
-
-	r = mgr->apply(mgr);
-	if (r)
-		return r;
-
-	return size;
-}
-
-static ssize_t manager_cpr_enable_show(struct omap_overlay_manager *mgr,
-		char *buf)
-{
-	struct omap_overlay_manager_info info;
-
-	mgr->get_manager_info(mgr, &info);
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", info.cpr_enable);
-}
-
-static ssize_t manager_cpr_enable_store(struct omap_overlay_manager *mgr,
-		const char *buf, size_t size)
-{
-	struct omap_overlay_manager_info info;
-	int r;
-	bool enable;
-
-	if (!dss_has_feature(FEAT_CPR))
-		return -ENODEV;
-
-	r = strtobool(buf, &enable);
-	if (r)
-		return r;
-
-	mgr->get_manager_info(mgr, &info);
-
-	if (info.cpr_enable == enable)
-		return size;
-
-	info.cpr_enable = enable;
-
-	r = mgr->set_manager_info(mgr, &info);
-	if (r)
-		return r;
-
-	r = mgr->apply(mgr);
-	if (r)
-		return r;
-
-	return size;
-}
-
-static ssize_t manager_cpr_coef_show(struct omap_overlay_manager *mgr,
-		char *buf)
-{
-	struct omap_overlay_manager_info info;
-
-	mgr->get_manager_info(mgr, &info);
-
-	return snprintf(buf, PAGE_SIZE,
-			"%d %d %d %d %d %d %d %d %d\n",
-			info.cpr_coefs.rr,
-			info.cpr_coefs.rg,
-			info.cpr_coefs.rb,
-			info.cpr_coefs.gr,
-			info.cpr_coefs.gg,
-			info.cpr_coefs.gb,
-			info.cpr_coefs.br,
-			info.cpr_coefs.bg,
-			info.cpr_coefs.bb);
-}
-
-static ssize_t manager_cpr_coef_store(struct omap_overlay_manager *mgr,
-		const char *buf, size_t size)
-{
-	struct omap_overlay_manager_info info;
-	struct omap_dss_cpr_coefs coefs;
-	int r, i;
-	s16 *arr;
-
-	if (!dss_has_feature(FEAT_CPR))
-		return -ENODEV;
-
-	if (sscanf(buf, "%hd %hd %hd %hd %hd %hd %hd %hd %hd",
-				&coefs.rr, &coefs.rg, &coefs.rb,
-				&coefs.gr, &coefs.gg, &coefs.gb,
-				&coefs.br, &coefs.bg, &coefs.bb) != 9)
-		return -EINVAL;
-
-	arr = (s16[]){ coefs.rr, coefs.rg, coefs.rb,
-		coefs.gr, coefs.gg, coefs.gb,
-		coefs.br, coefs.bg, coefs.bb };
-
-	for (i = 0; i < 9; ++i) {
-		if (arr[i] < -512 || arr[i] > 511)
-			return -EINVAL;
-	}
-
-	mgr->get_manager_info(mgr, &info);
-
-	info.cpr_coefs = coefs;
-
-	r = mgr->set_manager_info(mgr, &info);
-	if (r)
-		return r;
-
-	r = mgr->apply(mgr);
-	if (r)
-		return r;
-
-	return size;
-}
-
-struct manager_attribute {
-	struct attribute attr;
-	ssize_t (*show)(struct omap_overlay_manager *, char *);
-	ssize_t	(*store)(struct omap_overlay_manager *, const char *, size_t);
-};
-
-#define MANAGER_ATTR(_name, _mode, _show, _store) \
-	struct manager_attribute manager_attr_##_name = \
-	__ATTR(_name, _mode, _show, _store)
-
-static MANAGER_ATTR(name, S_IRUGO, manager_name_show, NULL);
-static MANAGER_ATTR(display, S_IRUGO|S_IWUSR,
-		manager_display_show, manager_display_store);
-static MANAGER_ATTR(default_color, S_IRUGO|S_IWUSR,
-		manager_default_color_show, manager_default_color_store);
-static MANAGER_ATTR(trans_key_type, S_IRUGO|S_IWUSR,
-		manager_trans_key_type_show, manager_trans_key_type_store);
-static MANAGER_ATTR(trans_key_value, S_IRUGO|S_IWUSR,
-		manager_trans_key_value_show, manager_trans_key_value_store);
-static MANAGER_ATTR(trans_key_enabled, S_IRUGO|S_IWUSR,
-		manager_trans_key_enabled_show,
-		manager_trans_key_enabled_store);
-static MANAGER_ATTR(alpha_blending_enabled, S_IRUGO|S_IWUSR,
-		manager_alpha_blending_enabled_show,
-		manager_alpha_blending_enabled_store);
-static MANAGER_ATTR(cpr_enable, S_IRUGO|S_IWUSR,
-		manager_cpr_enable_show,
-		manager_cpr_enable_store);
-static MANAGER_ATTR(cpr_coef, S_IRUGO|S_IWUSR,
-		manager_cpr_coef_show,
-		manager_cpr_coef_store);
-
-
-static struct attribute *manager_sysfs_attrs[] = {
-	&manager_attr_name.attr,
-	&manager_attr_display.attr,
-	&manager_attr_default_color.attr,
-	&manager_attr_trans_key_type.attr,
-	&manager_attr_trans_key_value.attr,
-	&manager_attr_trans_key_enabled.attr,
-	&manager_attr_alpha_blending_enabled.attr,
-	&manager_attr_cpr_enable.attr,
-	&manager_attr_cpr_coef.attr,
-	NULL
-};
-
-static ssize_t manager_attr_show(struct kobject *kobj, struct attribute *attr,
-		char *buf)
-{
-	struct omap_overlay_manager *manager;
-	struct manager_attribute *manager_attr;
-
-	manager = container_of(kobj, struct omap_overlay_manager, kobj);
-	manager_attr = container_of(attr, struct manager_attribute, attr);
-
-	if (!manager_attr->show)
-		return -ENOENT;
-
-	return manager_attr->show(manager, buf);
-}
-
-static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr,
-		const char *buf, size_t size)
-{
-	struct omap_overlay_manager *manager;
-	struct manager_attribute *manager_attr;
-
-	manager = container_of(kobj, struct omap_overlay_manager, kobj);
-	manager_attr = container_of(attr, struct manager_attribute, attr);
-
-	if (!manager_attr->store)
-		return -ENOENT;
-
-	return manager_attr->store(manager, buf, size);
-}
-
-static const struct sysfs_ops manager_sysfs_ops = {
-	.show = manager_attr_show,
-	.store = manager_attr_store,
-};
-
-static struct kobj_type manager_ktype = {
-	.sysfs_ops = &manager_sysfs_ops,
-	.default_attrs = manager_sysfs_attrs,
-};
-
 static int dss_mgr_wait_for_vsync(struct omap_overlay_manager *mgr)
 {
 	unsigned long timeout = msecs_to_jiffies(500);
@@ -561,9 +107,7 @@ int dss_init_overlay_managers(struct platform_device *pdev)
 
 		INIT_LIST_HEAD(&mgr->overlays);
 
-		r = kobject_init_and_add(&mgr->kobj, &manager_ktype,
-				&pdev->dev.kobj, "manager%d", i);
-
+		r = dss_manager_kobj_init(mgr, pdev);
 		if (r)
 			DSSERR("failed to create sysfs file\n");
 	}
@@ -577,9 +121,7 @@ void dss_uninit_overlay_managers(struct platform_device *pdev)
 
 	for (i = 0; i < num_managers; ++i) {
 		struct omap_overlay_manager *mgr = &managers[i];
-
-		kobject_del(&mgr->kobj);
-		kobject_put(&mgr->kobj);
+		dss_manager_kobj_uninit(mgr);
 	}
 
 	kfree(managers);
-- 
cgit v1.2.1


From aba965707c4e1b39fe51705488e0e0a2a4d2f803 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 9 Aug 2012 18:07:45 +0300
Subject: OMAPDSS: clean up dss_mgr_set_lcd_config

dss_mgr_set_lcd_config() can only be called when the output is not
active. This means that most of the code in the function is extra, as
there's no need to write the values to registers, etc, because that will
be handled when the output will be enabled.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/apply.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 52a5940a3773..53629dd0291b 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -1346,7 +1346,7 @@ void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
 	unsigned long flags;
 	struct mgr_priv_data *mp = get_mgr_priv(mgr);
 
-	mutex_lock(&apply_lock);
+	spin_lock_irqsave(&data_lock, flags);
 
 	if (mp->enabled) {
 		DSSERR("cannot apply lcd config for %s: manager needs to be disabled\n",
@@ -1354,19 +1354,9 @@ void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
 		goto out;
 	}
 
-	spin_lock_irqsave(&data_lock, flags);
-
 	dss_apply_mgr_lcd_config(mgr, config);
-
-	dss_write_regs();
-	dss_set_go_bits();
-
-	spin_unlock_irqrestore(&data_lock, flags);
-
-	wait_pending_extra_info_updates();
-
 out:
-	mutex_unlock(&apply_lock);
+	spin_unlock_irqrestore(&data_lock, flags);
 }
 
 int dss_ovl_set_info(struct omap_overlay *ovl,
-- 
cgit v1.2.1


From fed62e54ae1f80f4631ce154225cf019f1219e59 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 9 Aug 2012 18:13:13 +0300
Subject: OMAPDSS: clean up dss_mgr_set_timings

dss_mgr_set_timings() can only be called when the output is not active.
This means that most of the code in the function is extra, as there's no
need to write the values to registers, etc, because that will be handled
when the output will be enabled.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/apply.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 53629dd0291b..385b6df9925d 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -1314,21 +1314,19 @@ void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
 		const struct omap_video_timings *timings)
 {
 	unsigned long flags;
-
-	mutex_lock(&apply_lock);
+	struct mgr_priv_data *mp = get_mgr_priv(mgr);
 
 	spin_lock_irqsave(&data_lock, flags);
 
-	dss_apply_mgr_timings(mgr, timings);
-
-	dss_write_regs();
-	dss_set_go_bits();
+	if (mp->updating) {
+		DSSERR("cannot set timings for %s: manager needs to be disabled\n",
+			mgr->name);
+		goto out;
+	}
 
+	dss_apply_mgr_timings(mgr, timings);
+out:
 	spin_unlock_irqrestore(&data_lock, flags);
-
-	wait_pending_extra_info_updates();
-
-	mutex_unlock(&apply_lock);
 }
 
 static void dss_apply_mgr_lcd_config(struct omap_overlay_manager *mgr,
-- 
cgit v1.2.1


From b3e93cbddd6ab0c529a747a910e3bf9615e89982 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 6 Aug 2012 16:50:14 +0300
Subject: Revert "OMAPDSS: APPLY: add fifo-merge support"

This reverts commit 1d71f42b35ed66d90a9a39bc515bb16cfe2d4a46.

Adding fifo merge feature as an omapdss internal configuration was a
mistake. We cannot hide from the users of omapdss the complexities of
fifo merge.

This commit removes the fifo merge support, which luckily is easily done
as it was handled totally inside apply.c. Note that this is not a 1:1
revert, but some resolving was needed for the dss_ovl_setup_fifo.

The plan is to try fifo merge again later when it is more clear how the
hardware acts in various situations, and how the omapdrm wants to use
fifo merge.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/apply.c | 154 +++-------------------------------------
 1 file changed, 8 insertions(+), 146 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 385b6df9925d..484751f15e2d 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -993,11 +993,11 @@ static void dss_apply_fifo_merge(bool use_fifo_merge)
 	dss_data.fifo_merge_dirty = true;
 }
 
-static void dss_ovl_setup_fifo(struct omap_overlay *ovl,
-		bool use_fifo_merge)
+static void dss_ovl_setup_fifo(struct omap_overlay *ovl)
 {
 	struct ovl_priv_data *op = get_ovl_priv(ovl);
 	u32 fifo_low, fifo_high;
+	bool use_fifo_merge = false;
 
 	if (!op->enabled && !op->enabling)
 		return;
@@ -1008,8 +1008,7 @@ static void dss_ovl_setup_fifo(struct omap_overlay *ovl,
 	dss_apply_ovl_fifo_thresholds(ovl, fifo_low, fifo_high);
 }
 
-static void dss_mgr_setup_fifos(struct omap_overlay_manager *mgr,
-		bool use_fifo_merge)
+static void dss_mgr_setup_fifos(struct omap_overlay_manager *mgr)
 {
 	struct omap_overlay *ovl;
 	struct mgr_priv_data *mp;
@@ -1020,10 +1019,10 @@ static void dss_mgr_setup_fifos(struct omap_overlay_manager *mgr,
 		return;
 
 	list_for_each_entry(ovl, &mgr->overlays, list)
-		dss_ovl_setup_fifo(ovl, use_fifo_merge);
+		dss_ovl_setup_fifo(ovl);
 }
 
-static void dss_setup_fifos(bool use_fifo_merge)
+static void dss_setup_fifos(void)
 {
 	const int num_mgrs = omap_dss_get_num_overlay_managers();
 	struct omap_overlay_manager *mgr;
@@ -1031,91 +1030,15 @@ static void dss_setup_fifos(bool use_fifo_merge)
 
 	for (i = 0; i < num_mgrs; ++i) {
 		mgr = omap_dss_get_overlay_manager(i);
-		dss_mgr_setup_fifos(mgr, use_fifo_merge);
+		dss_mgr_setup_fifos(mgr);
 	}
 }
 
-static int get_num_used_managers(void)
-{
-	const int num_mgrs = omap_dss_get_num_overlay_managers();
-	struct omap_overlay_manager *mgr;
-	struct mgr_priv_data *mp;
-	int i;
-	int enabled_mgrs;
-
-	enabled_mgrs = 0;
-
-	for (i = 0; i < num_mgrs; ++i) {
-		mgr = omap_dss_get_overlay_manager(i);
-		mp = get_mgr_priv(mgr);
-
-		if (!mp->enabled)
-			continue;
-
-		enabled_mgrs++;
-	}
-
-	return enabled_mgrs;
-}
-
-static int get_num_used_overlays(void)
-{
-	const int num_ovls = omap_dss_get_num_overlays();
-	struct omap_overlay *ovl;
-	struct ovl_priv_data *op;
-	struct mgr_priv_data *mp;
-	int i;
-	int enabled_ovls;
-
-	enabled_ovls = 0;
-
-	for (i = 0; i < num_ovls; ++i) {
-		ovl = omap_dss_get_overlay(i);
-		op = get_ovl_priv(ovl);
-
-		if (!op->enabled && !op->enabling)
-			continue;
-
-		mp = get_mgr_priv(ovl->manager);
-
-		if (!mp->enabled)
-			continue;
-
-		enabled_ovls++;
-	}
-
-	return enabled_ovls;
-}
-
-static bool get_use_fifo_merge(void)
-{
-	int enabled_mgrs = get_num_used_managers();
-	int enabled_ovls = get_num_used_overlays();
-
-	if (!dss_has_feature(FEAT_FIFO_MERGE))
-		return false;
-
-	/*
-	 * In theory the only requirement for fifomerge is enabled_ovls <= 1.
-	 * However, if we have two managers enabled and set/unset the fifomerge,
-	 * we need to set the GO bits in particular sequence for the managers,
-	 * and wait in between.
-	 *
-	 * This is rather difficult as new apply calls can happen at any time,
-	 * so we simplify the problem by requiring also that enabled_mgrs <= 1.
-	 * In practice this shouldn't matter, because when only one overlay is
-	 * enabled, most likely only one output is enabled.
-	 */
-
-	return enabled_mgrs <= 1 && enabled_ovls <= 1;
-}
-
 int dss_mgr_enable(struct omap_overlay_manager *mgr)
 {
 	struct mgr_priv_data *mp = get_mgr_priv(mgr);
 	unsigned long flags;
 	int r;
-	bool fifo_merge;
 
 	mutex_lock(&apply_lock);
 
@@ -1133,23 +1056,11 @@ int dss_mgr_enable(struct omap_overlay_manager *mgr)
 		goto err;
 	}
 
-	/* step 1: setup fifos/fifomerge before enabling the manager */
-
-	fifo_merge = get_use_fifo_merge();
-	dss_setup_fifos(fifo_merge);
-	dss_apply_fifo_merge(fifo_merge);
+	dss_setup_fifos();
 
 	dss_write_regs();
 	dss_set_go_bits();
 
-	spin_unlock_irqrestore(&data_lock, flags);
-
-	/* wait until fifo config is in */
-	wait_pending_extra_info_updates();
-
-	/* step 2: enable the manager */
-	spin_lock_irqsave(&data_lock, flags);
-
 	if (!mgr_manual_update(mgr))
 		mp->updating = true;
 
@@ -1174,7 +1085,6 @@ void dss_mgr_disable(struct omap_overlay_manager *mgr)
 {
 	struct mgr_priv_data *mp = get_mgr_priv(mgr);
 	unsigned long flags;
-	bool fifo_merge;
 
 	mutex_lock(&apply_lock);
 
@@ -1189,16 +1099,8 @@ void dss_mgr_disable(struct omap_overlay_manager *mgr)
 	mp->updating = false;
 	mp->enabled = false;
 
-	fifo_merge = get_use_fifo_merge();
-	dss_setup_fifos(fifo_merge);
-	dss_apply_fifo_merge(fifo_merge);
-
-	dss_write_regs();
-	dss_set_go_bits();
-
 	spin_unlock_irqrestore(&data_lock, flags);
 
-	wait_pending_extra_info_updates();
 out:
 	mutex_unlock(&apply_lock);
 }
@@ -1505,7 +1407,6 @@ int dss_ovl_enable(struct omap_overlay *ovl)
 {
 	struct ovl_priv_data *op = get_ovl_priv(ovl);
 	unsigned long flags;
-	bool fifo_merge;
 	int r;
 
 	mutex_lock(&apply_lock);
@@ -1531,22 +1432,7 @@ int dss_ovl_enable(struct omap_overlay *ovl)
 		goto err2;
 	}
 
-	/* step 1: configure fifos/fifomerge for currently enabled ovls */
-
-	fifo_merge = get_use_fifo_merge();
-	dss_setup_fifos(fifo_merge);
-	dss_apply_fifo_merge(fifo_merge);
-
-	dss_write_regs();
-	dss_set_go_bits();
-
-	spin_unlock_irqrestore(&data_lock, flags);
-
-	/* wait for fifo configs to go in */
-	wait_pending_extra_info_updates();
-
-	/* step 2: enable the overlay */
-	spin_lock_irqsave(&data_lock, flags);
+	dss_setup_fifos();
 
 	op->enabling = false;
 	dss_apply_ovl_enable(ovl, true);
@@ -1556,9 +1442,6 @@ int dss_ovl_enable(struct omap_overlay *ovl)
 
 	spin_unlock_irqrestore(&data_lock, flags);
 
-	/* wait for overlay to be enabled */
-	wait_pending_extra_info_updates();
-
 	mutex_unlock(&apply_lock);
 
 	return 0;
@@ -1574,7 +1457,6 @@ int dss_ovl_disable(struct omap_overlay *ovl)
 {
 	struct ovl_priv_data *op = get_ovl_priv(ovl);
 	unsigned long flags;
-	bool fifo_merge;
 	int r;
 
 	mutex_lock(&apply_lock);
@@ -1589,34 +1471,14 @@ int dss_ovl_disable(struct omap_overlay *ovl)
 		goto err;
 	}
 
-	/* step 1: disable the overlay */
 	spin_lock_irqsave(&data_lock, flags);
 
 	dss_apply_ovl_enable(ovl, false);
-
 	dss_write_regs();
 	dss_set_go_bits();
 
 	spin_unlock_irqrestore(&data_lock, flags);
 
-	/* wait for the overlay to be disabled */
-	wait_pending_extra_info_updates();
-
-	/* step 2: configure fifos/fifomerge */
-	spin_lock_irqsave(&data_lock, flags);
-
-	fifo_merge = get_use_fifo_merge();
-	dss_setup_fifos(fifo_merge);
-	dss_apply_fifo_merge(fifo_merge);
-
-	dss_write_regs();
-	dss_set_go_bits();
-
-	spin_unlock_irqrestore(&data_lock, flags);
-
-	/* wait for fifo config to go in */
-	wait_pending_extra_info_updates();
-
 	mutex_unlock(&apply_lock);
 
 	return 0;
-- 
cgit v1.2.1


From 85099f11bd0360a0327edb1f61aeea89764677bf Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 6 Aug 2012 16:51:42 +0300
Subject: Revert "OMAPDSS: APPLY: add fifo merge support funcs"

This reverts commit fb0119742291b6f30cd97026ee137b2d3d1f4de8.

Adding fifo merge feature as an omapdss internal configuration was a
mistake. We cannot hide from the users of omapdss the complexities of
fifo merge.

The previous commit removed fifo merge itself, and this removes the
remaining fifo merge support functions.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/apply.c | 43 -----------------------------------------
 1 file changed, 43 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 484751f15e2d..4a58d80a6315 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -111,9 +111,6 @@ static struct {
 	struct ovl_priv_data ovl_priv_data_array[MAX_DSS_OVERLAYS];
 	struct mgr_priv_data mgr_priv_data_array[MAX_DSS_MANAGERS];
 
-	bool fifo_merge_dirty;
-	bool fifo_merge;
-
 	bool irq_enabled;
 } dss_data;
 
@@ -677,40 +674,11 @@ static void dss_mgr_write_regs_extra(struct omap_overlay_manager *mgr)
 		mp->shadow_extra_info_dirty = true;
 }
 
-static void dss_write_regs_common(void)
-{
-	const int num_mgrs = omap_dss_get_num_overlay_managers();
-	int i;
-
-	if (!dss_data.fifo_merge_dirty)
-		return;
-
-	for (i = 0; i < num_mgrs; ++i) {
-		struct omap_overlay_manager *mgr;
-		struct mgr_priv_data *mp;
-
-		mgr = omap_dss_get_overlay_manager(i);
-		mp = get_mgr_priv(mgr);
-
-		if (mp->enabled) {
-			if (dss_data.fifo_merge_dirty) {
-				dispc_enable_fifomerge(dss_data.fifo_merge);
-				dss_data.fifo_merge_dirty = false;
-			}
-
-			if (mp->updating)
-				mp->shadow_info_dirty = true;
-		}
-	}
-}
-
 static void dss_write_regs(void)
 {
 	const int num_mgrs = omap_dss_get_num_overlay_managers();
 	int i;
 
-	dss_write_regs_common();
-
 	for (i = 0; i < num_mgrs; ++i) {
 		struct omap_overlay_manager *mgr;
 		struct mgr_priv_data *mp;
@@ -799,8 +767,6 @@ void dss_mgr_start_update(struct omap_overlay_manager *mgr)
 	dss_mgr_write_regs(mgr);
 	dss_mgr_write_regs_extra(mgr);
 
-	dss_write_regs_common();
-
 	mp->updating = true;
 
 	if (!dss_data.irq_enabled && need_isr())
@@ -984,15 +950,6 @@ static void dss_apply_ovl_fifo_thresholds(struct omap_overlay *ovl,
 	op->extra_info_dirty = true;
 }
 
-static void dss_apply_fifo_merge(bool use_fifo_merge)
-{
-	if (dss_data.fifo_merge == use_fifo_merge)
-		return;
-
-	dss_data.fifo_merge = use_fifo_merge;
-	dss_data.fifo_merge_dirty = true;
-}
-
 static void dss_ovl_setup_fifo(struct omap_overlay *ovl)
 {
 	struct ovl_priv_data *op = get_ovl_priv(ovl);
-- 
cgit v1.2.1


From 42a6961cf6d23632b8b5c64bd8711aef33e89518 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 22 Aug 2012 16:56:57 +0300
Subject: OMAPDSS: Improve fifo management code

OMAP4+ allows assigning the overlay FIFOs freely, but that is not
supported by omapdss yet. This patch takes a step forward by improving
the fifo management to be more flexible.

dispc.c is changed to keep track of the sizes of each fifo, and also the
overlay using each fifo.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 39 +++++++++++++++++++++++++++++++--------
 1 file changed, 31 insertions(+), 8 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index e934abb08dcf..dc0f372c6b22 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -94,8 +94,11 @@ struct dispc_features {
 		u16 pos_x, unsigned long *core_clk);
 	unsigned long (*calc_core_clk) (enum omap_channel channel,
 		u16 width, u16 height, u16 out_width, u16 out_height);
+	u8 num_fifos;
 };
 
+#define DISPC_MAX_NR_FIFOS 5
+
 static struct {
 	struct platform_device *pdev;
 	void __iomem    *base;
@@ -105,7 +108,9 @@ static struct {
 	int irq;
 	struct clk *dss_clk;
 
-	u32	fifo_size[MAX_DSS_OVERLAYS];
+	u32 fifo_size[DISPC_MAX_NR_FIFOS];
+	/* maps which plane is using a fifo. fifo-id -> plane-id */
+	int fifo_assignment[DISPC_MAX_NR_FIFOS];
 
 	spinlock_t irq_lock;
 	u32 irq_error_mask;
@@ -1061,10 +1066,10 @@ static void dispc_mgr_set_size(enum omap_channel channel, u16 width,
 	dispc_write_reg(DISPC_SIZE_MGR(channel), val);
 }
 
-static void dispc_read_plane_fifo_sizes(void)
+static void dispc_init_fifos(void)
 {
 	u32 size;
-	int plane;
+	int fifo;
 	u8 start, end;
 	u32 unit;
 
@@ -1072,16 +1077,30 @@ static void dispc_read_plane_fifo_sizes(void)
 
 	dss_feat_get_reg_field(FEAT_REG_FIFOSIZE, &start, &end);
 
-	for (plane = 0; plane < dss_feat_get_num_ovls(); ++plane) {
-		size = REG_GET(DISPC_OVL_FIFO_SIZE_STATUS(plane), start, end);
+	for (fifo = 0; fifo < dispc.feat->num_fifos; ++fifo) {
+		size = REG_GET(DISPC_OVL_FIFO_SIZE_STATUS(fifo), start, end);
 		size *= unit;
-		dispc.fifo_size[plane] = size;
+		dispc.fifo_size[fifo] = size;
+
+		/*
+		 * By default fifos are mapped directly to overlays, fifo 0 to
+		 * ovl 0, fifo 1 to ovl 1, etc.
+		 */
+		dispc.fifo_assignment[fifo] = fifo;
 	}
 }
 
 static u32 dispc_ovl_get_fifo_size(enum omap_plane plane)
 {
-	return dispc.fifo_size[plane];
+	int fifo;
+	u32 size = 0;
+
+	for (fifo = 0; fifo < dispc.feat->num_fifos; ++fifo) {
+		if (dispc.fifo_assignment[fifo] == plane)
+			size += dispc.fifo_size[fifo];
+	}
+
+	return size;
 }
 
 void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high)
@@ -3708,7 +3727,7 @@ static void _omap_dispc_initial_config(void)
 
 	dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY);
 
-	dispc_read_plane_fifo_sizes();
+	dispc_init_fifos();
 
 	dispc_configure_burst_sizes();
 
@@ -3724,6 +3743,7 @@ static const struct dispc_features omap24xx_dispc_feats __initconst = {
 	.hp_max			=	256,
 	.calc_scaling		=	dispc_ovl_calc_scaling_24xx,
 	.calc_core_clk		=	calc_core_clk_24xx,
+	.num_fifos		=	3,
 };
 
 static const struct dispc_features omap34xx_rev1_0_dispc_feats __initconst = {
@@ -3735,6 +3755,7 @@ static const struct dispc_features omap34xx_rev1_0_dispc_feats __initconst = {
 	.hp_max			=	256,
 	.calc_scaling		=	dispc_ovl_calc_scaling_34xx,
 	.calc_core_clk		=	calc_core_clk_34xx,
+	.num_fifos		=	3,
 };
 
 static const struct dispc_features omap34xx_rev3_0_dispc_feats __initconst = {
@@ -3746,6 +3767,7 @@ static const struct dispc_features omap34xx_rev3_0_dispc_feats __initconst = {
 	.hp_max			=	4096,
 	.calc_scaling		=	dispc_ovl_calc_scaling_34xx,
 	.calc_core_clk		=	calc_core_clk_34xx,
+	.num_fifos		=	3,
 };
 
 static const struct dispc_features omap44xx_dispc_feats __initconst = {
@@ -3757,6 +3779,7 @@ static const struct dispc_features omap44xx_dispc_feats __initconst = {
 	.hp_max			=	4096,
 	.calc_scaling		=	dispc_ovl_calc_scaling_44xx,
 	.calc_core_clk		=	calc_core_clk_44xx,
+	.num_fifos		=	5,
 };
 
 static int __init dispc_init_features(struct device *dev)
-- 
cgit v1.2.1


From 66a0f9e4ac46144fb86ebe90f58ce6f416a55cd5 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 22 Aug 2012 16:57:02 +0300
Subject: OMAPDSS: Use WB fifo for GFX overlay

OMAP4's GFX overlay has smaller fifo than the rest of the overlays
(including writeback "overlay"). This seems to be the reason for
underflows in some more demanding scenarios.

We can avoid the problems by using the WB fifo for GFX overlay, and vice
versa. WB usage is not supported yet, but when it will, it should
perform just fine with smaller fifo as there are no hard realtime
constraints with WB.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 27 +++++++++++++++++++++++++++
 drivers/video/omap2/dss/dispc.h |  4 ++++
 2 files changed, 31 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index dc0f372c6b22..d512c389741e 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -95,6 +95,9 @@ struct dispc_features {
 	unsigned long (*calc_core_clk) (enum omap_channel channel,
 		u16 width, u16 height, u16 out_width, u16 out_height);
 	u8 num_fifos;
+
+	/* swap GFX & WB fifos */
+	bool gfx_fifo_workaround:1;
 };
 
 #define DISPC_MAX_NR_FIFOS 5
@@ -1088,6 +1091,29 @@ static void dispc_init_fifos(void)
 		 */
 		dispc.fifo_assignment[fifo] = fifo;
 	}
+
+	/*
+	 * The GFX fifo on OMAP4 is smaller than the other fifos. The small fifo
+	 * causes problems with certain use cases, like using the tiler in 2D
+	 * mode. The below hack swaps the fifos of GFX and WB planes, thus
+	 * giving GFX plane a larger fifo. WB but should work fine with a
+	 * smaller fifo.
+	 */
+	if (dispc.feat->gfx_fifo_workaround) {
+		u32 v;
+
+		v = dispc_read_reg(DISPC_GLOBAL_BUFFER);
+
+		v = FLD_MOD(v, 4, 2, 0); /* GFX BUF top to WB */
+		v = FLD_MOD(v, 4, 5, 3); /* GFX BUF bottom to WB */
+		v = FLD_MOD(v, 0, 26, 24); /* WB BUF top to GFX */
+		v = FLD_MOD(v, 0, 29, 27); /* WB BUF bottom to GFX */
+
+		dispc_write_reg(DISPC_GLOBAL_BUFFER, v);
+
+		dispc.fifo_assignment[OMAP_DSS_GFX] = OMAP_DSS_WB;
+		dispc.fifo_assignment[OMAP_DSS_WB] = OMAP_DSS_GFX;
+	}
 }
 
 static u32 dispc_ovl_get_fifo_size(enum omap_plane plane)
@@ -3780,6 +3806,7 @@ static const struct dispc_features omap44xx_dispc_feats __initconst = {
 	.calc_scaling		=	dispc_ovl_calc_scaling_44xx,
 	.calc_core_clk		=	calc_core_clk_44xx,
 	.num_fifos		=	5,
+	.gfx_fifo_workaround	=	true,
 };
 
 static int __init dispc_init_features(struct device *dev)
diff --git a/drivers/video/omap2/dss/dispc.h b/drivers/video/omap2/dss/dispc.h
index 92d8a9be86fc..42e56cc7cdbc 100644
--- a/drivers/video/omap2/dss/dispc.h
+++ b/drivers/video/omap2/dss/dispc.h
@@ -36,6 +36,7 @@
 #define DISPC_CONTROL2			0x0238
 #define DISPC_CONFIG2			0x0620
 #define DISPC_DIVISOR			0x0804
+#define DISPC_GLOBAL_BUFFER		0x0800
 #define DISPC_CONTROL3                  0x0848
 #define DISPC_CONFIG3                   0x084C
 
@@ -355,6 +356,8 @@ static inline u16 DISPC_OVL_BASE(enum omap_plane plane)
 		return 0x014C;
 	case OMAP_DSS_VIDEO3:
 		return 0x0300;
+	case OMAP_DSS_WB:
+		return 0x0500;
 	default:
 		BUG();
 		return 0;
@@ -517,6 +520,7 @@ static inline u16 DISPC_FIFO_SIZE_STATUS_OFFSET(enum omap_plane plane)
 	case OMAP_DSS_VIDEO2:
 		return 0x0018;
 	case OMAP_DSS_VIDEO3:
+	case OMAP_DSS_WB:
 		return 0x0088;
 	default:
 		BUG();
-- 
cgit v1.2.1


From b82fe7f025183897880771dd7cdf725ecc148ff2 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 5 Sep 2012 14:09:33 +0300
Subject: OMAPDSS: fix set_timings

set_timings function of DSS's output drivers are not consistent. Some of
them disable the output, set the timings, and re-enable the output. Some
set the timings on the fly, while the output is enabled. And some just
store the given timings, so that they will be taken into use next time
the output is enabled.

We require the DISPC output to be disabled when changing the timings,
and so we can change all the output drivers' set_timings to just store
the given timings.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/display.c |  4 ++++
 drivers/video/omap2/dss/dpi.c     | 14 --------------
 drivers/video/omap2/dss/hdmi.c    | 12 ------------
 drivers/video/omap2/dss/sdi.c     | 10 ----------
 drivers/video/omap2/dss/venc.c    | 13 -------------
 5 files changed, 4 insertions(+), 49 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index 5bd957e85505..5f09d503d619 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -142,7 +142,11 @@ static ssize_t display_timings_store(struct device *dev,
 	if (r)
 		return r;
 
+	dssdev->driver->disable(dssdev);
 	dssdev->driver->set_timings(dssdev, &t);
+	r = dssdev->driver->enable(dssdev);
+	if (r)
+		return r;
 
 	return size;
 }
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 99b9851f8429..5ccce9b69e42 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -277,26 +277,12 @@ EXPORT_SYMBOL(omapdss_dpi_display_disable);
 void omapdss_dpi_set_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
-	int r;
-
 	DSSDBG("dpi_set_timings\n");
 
 	mutex_lock(&dpi.lock);
 
 	dpi.timings = *timings;
 
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
-		r = dispc_runtime_get();
-		if (r)
-			return;
-
-		dpi_set_mode(dssdev);
-
-		dispc_runtime_put();
-	} else {
-		dss_mgr_set_timings(dssdev->manager, timings);
-	}
-
 	mutex_unlock(&dpi.lock);
 }
 EXPORT_SYMBOL(omapdss_dpi_set_timings);
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index ccfc677c910a..83f18458a406 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -632,18 +632,6 @@ void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev,
 	if (t != NULL)
 		hdmi.ip_data.cfg = *t;
 
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
-		int r;
-
-		hdmi_power_off(dssdev);
-
-		r = hdmi_power_on(dssdev);
-		if (r)
-			DSSERR("failed to power on device\n");
-	} else {
-		dss_mgr_set_timings(dssdev->manager, &t->timings);
-	}
-
 	mutex_unlock(&hdmi.lock);
 }
 
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 3bf1bfe29585..c87e07ebb16d 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -152,17 +152,7 @@ EXPORT_SYMBOL(omapdss_sdi_display_disable);
 void omapdss_sdi_set_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
-	int r;
-
 	sdi.timings = *timings;
-
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
-		omapdss_sdi_display_disable(dssdev);
-
-		r = omapdss_sdi_display_enable(dssdev);
-		if (r)
-			DSSERR("failed to set new timings\n");
-	}
 }
 EXPORT_SYMBOL(omapdss_sdi_set_timings);
 
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 45252cf034b3..17b31029a793 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -564,19 +564,6 @@ void omapdss_venc_set_timings(struct omap_dss_device *dssdev,
 
 	venc.timings = *timings;
 
-	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
-		int r;
-
-		/* turn the venc off and on to get new timings to use */
-		venc_power_off(dssdev);
-
-		r = venc_power_on(dssdev);
-		if (r)
-			DSSERR("failed to power on VENC\n");
-	} else {
-		dss_mgr_set_timings(dssdev->manager, timings);
-	}
-
 	mutex_unlock(&venc.venc_lock);
 }
 
-- 
cgit v1.2.1


From b2f5976c109350977104f27211a7029ec67cd488 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 6 Sep 2012 16:10:28 +0300
Subject: OMAPDSS: fix dss_ovl_unset_manager

When we removed fifomerge support, we also changed dss_ovl_disable so
that it doesn't wait for the hardware to be finished with the overlay.
This may cause a problem when changing the overlay's manager, as
changing the manager is an immediate change. Thus if the overlay is
still being used by the HW when the manager is changed, there may be
glitches on the screen.

This patch adds a wait into dss_ovl_unset_manager, which ensures the
overlays are disabled in the HW.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/apply.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 4a58d80a6315..6354bb842856 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -1330,6 +1330,13 @@ int dss_ovl_unset_manager(struct omap_overlay *ovl)
 		goto err;
 	}
 
+	spin_unlock_irqrestore(&data_lock, flags);
+
+	/* wait for pending extra_info updates to ensure the ovl is disabled */
+	wait_pending_extra_info_updates();
+
+	spin_lock_irqsave(&data_lock, flags);
+
 	op->channel = -1;
 
 	ovl->manager = NULL;
-- 
cgit v1.2.1


From fda7c362f9ef59de6d6db67a854e1a114af0c69a Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Tue, 11 Sep 2012 15:34:08 +0530
Subject: OMAPFB: Clear framebuffers before they are registered

The framebuffers are cleared with the function omapfb_clear_fb(), which
internally calls cfb_fillrect(). The boot logo is copied on to the
framebuffer when the fb device is registered with fb framework.

omapfb_clear_fb() is called after the framebuffer is registered, leading to
the boot logo getting cleared. Clear the framebuffers using omapfb_clear_fb()
before registering the framebuffer devices.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/omapfb/omapfb-main.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 7afdfcf3bac8..77ae9edbf2cd 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1961,6 +1961,16 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
 		}
 	}
 
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		struct fb_info *fbi = fbdev->fbs[i];
+		struct omapfb_info *ofbi = FB2OFB(fbi);
+
+		if (ofbi->region->size == 0)
+			continue;
+
+		omapfb_clear_fb(fbi);
+	}
+
 	DBG("fb_infos initialized\n");
 
 	for (i = 0; i < fbdev->num_fbs; i++) {
@@ -1988,16 +1998,6 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
 		}
 	}
 
-	for (i = 0; i < fbdev->num_fbs; i++) {
-		struct fb_info *fbi = fbdev->fbs[i];
-		struct omapfb_info *ofbi = FB2OFB(fbi);
-
-		if (ofbi->region->size == 0)
-			continue;
-
-		omapfb_clear_fb(fbi);
-	}
-
 	/* Enable fb0 */
 	if (fbdev->num_fbs > 0) {
 		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]);
-- 
cgit v1.2.1


From 8768a52f8f53e6f54bce77faade1007d4142fa7c Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 6 Sep 2012 13:57:39 +0300
Subject: OMAPDSS: omap_dss_register_device() doesn't take display index

We used to have all the displays of the board in one list, and we made a
"displayX" directory in the sysfs, where X was the index of the display
in the list.

This doesn't work anymore with device tree, as there's no single list to
get the number from, and it doesn't work very well even with non-DT as
we need to do some tricks to get the index nowadays.

This patch changes omap_dss_register_device() so that it doesn't take
disp_num as a parameter anymore, but uses a private increasing counter
for the display number.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/core.c | 9 +++++----
 drivers/video/omap2/dss/dpi.c  | 2 +-
 drivers/video/omap2/dss/dsi.c  | 2 +-
 drivers/video/omap2/dss/dss.h  | 2 +-
 drivers/video/omap2/dss/hdmi.c | 2 +-
 drivers/video/omap2/dss/rfbi.c | 2 +-
 drivers/video/omap2/dss/sdi.c  | 2 +-
 drivers/video/omap2/dss/venc.c | 2 +-
 8 files changed, 12 insertions(+), 11 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 58bd9c27369d..20c8bc8291b4 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -450,16 +450,17 @@ static void omap_dss_dev_release(struct device *dev)
 	reset_device(dev, 0);
 }
 
+static int disp_num_counter;
+
 int omap_dss_register_device(struct omap_dss_device *dssdev,
-		struct device *parent, int disp_num)
+		struct device *parent)
 {
-	WARN_ON(!dssdev->driver_name);
-
 	reset_device(&dssdev->dev, 1);
+
 	dssdev->dev.bus = &dss_bus_type;
 	dssdev->dev.parent = parent;
 	dssdev->dev.release = omap_dss_dev_release;
-	dev_set_name(&dssdev->dev, "display%d", disp_num);
+	dev_set_name(&dssdev->dev, "display%d", disp_num_counter++);
 	return device_register(&dssdev->dev);
 }
 
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 5ccce9b69e42..703fc1d8ec80 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -388,7 +388,7 @@ static void __init dpi_probe_pdata(struct platform_device *pdev)
 			continue;
 		}
 
-		r = omap_dss_register_device(dssdev, &pdev->dev, i);
+		r = omap_dss_register_device(dssdev, &pdev->dev);
 		if (r)
 			DSSERR("device %s register failed: %d\n",
 					dssdev->name, r);
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 8d815e39e45d..f7078fc90459 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -5027,7 +5027,7 @@ static void __init dsi_probe_pdata(struct platform_device *dsidev)
 			continue;
 		}
 
-		r = omap_dss_register_device(dssdev, &dsidev->dev, i);
+		r = omap_dss_register_device(dssdev, &dsidev->dev);
 		if (r)
 			DSSERR("device %s register failed: %d\n",
 					dssdev->name, r);
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 5e9fd7691728..7bac8ee078ad 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -185,7 +185,7 @@ int dss_set_min_bus_tput(struct device *dev, unsigned long tput);
 int dss_debugfs_create_file(const char *name, void (*write)(struct seq_file *));
 
 int omap_dss_register_device(struct omap_dss_device *dssdev,
-		struct device *parent, int disp_num);
+		struct device *parent);
 void omap_dss_unregister_device(struct omap_dss_device *dssdev);
 void omap_dss_unregister_child_devices(struct device *parent);
 
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 83f18458a406..bb07143a2d79 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -923,7 +923,7 @@ static void __init hdmi_probe_pdata(struct platform_device *pdev)
 			continue;
 		}
 
-		r = omap_dss_register_device(dssdev, &pdev->dev, i);
+		r = omap_dss_register_device(dssdev, &pdev->dev);
 		if (r)
 			DSSERR("device %s register failed: %d\n",
 					dssdev->name, r);
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 2e520d3085c8..845b4e70a28e 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -959,7 +959,7 @@ static void __init rfbi_probe_pdata(struct platform_device *pdev)
 			continue;
 		}
 
-		r = omap_dss_register_device(dssdev, &pdev->dev, i);
+		r = omap_dss_register_device(dssdev, &pdev->dev);
 		if (r)
 			DSSERR("device %s register failed: %d\n",
 				dssdev->name, r);
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 66c8de4365d6..c9a9045e19f2 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -212,7 +212,7 @@ static void __init sdi_probe_pdata(struct platform_device *pdev)
 			continue;
 		}
 
-		r = omap_dss_register_device(dssdev, &pdev->dev, i);
+		r = omap_dss_register_device(dssdev, &pdev->dev);
 		if (r)
 			DSSERR("device %s register failed: %d\n",
 					dssdev->name, r);
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 17b31029a793..60bfc5801636 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -752,7 +752,7 @@ static void __init venc_probe_pdata(struct platform_device *pdev)
 			continue;
 		}
 
-		r = omap_dss_register_device(dssdev, &pdev->dev, i);
+		r = omap_dss_register_device(dssdev, &pdev->dev);
 		if (r)
 			DSSERR("device %s register failed: %d\n",
 					dssdev->name, r);
-- 
cgit v1.2.1


From 6a03fca96e4d4d010be52e11fc7b8ab89da9d2cf Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 6 Sep 2012 14:26:10 +0300
Subject: OMAPDSS: Add dss_get_default_display_name()

Add function dss_get_default_display_name() which returns the name of
the default display, given from the board file or via module parameters.
The default display name can be used by output drivers to decide which
display is the wanted one.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/core.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 20c8bc8291b4..315f557f1d1a 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -57,6 +57,11 @@ bool dss_debug;
 module_param_named(debug, dss_debug, bool, 0644);
 #endif
 
+const char *dss_get_default_display_name(void)
+{
+	return core.default_display_name;
+}
+
 /* REGULATORS */
 
 struct regulator *dss_get_vdds_dsi(void)
-- 
cgit v1.2.1


From 1521653c72596aaf1899c8d79a3f541f79ff238b Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Thu, 6 Sep 2012 14:29:31 +0300
Subject: OMAPDSS: register only one display device per output

We have boards with multiple panel devices connected to the same
physical output, of which only one panel can be enabled at one time.
Examples of these are Overo, where you can use different daughter boards
that have different LCDs, and 3430SDP which has an LCD and a DVI output
and a physical switch to select the active display.

These are supported by omapdss so that we add all the possible display
devices at probe, but the displays are inactive until somebody enables
one. At this point the panel driver starts using the DSS, thus reserving
the physcal resource and excluding the other panels.

This is problematic:
- Panel drivers can't allocate their resources properly at probe(),
  because the resources can be shared with other panels. Thus they can
  be only reserved at enable time.
- Managing this in omapdss is confusing. It's not natural to have
  child devices, which may not even exist (for example, a daughterboard
  that is not connected).

Only some boards have multiple displays per output, and of those, only
very few have possibility of switching the display during runtime.
Because of the above points:
- We don't want to make omapdss and all the panel drivers more complex
  just because some boards have complex setups.
- Only few boards support runtime switching, and afaik even then it's
  not required. So we don't need to support runtime switching.

Thus we'll change to a model where we will have only one display device
per output and this cannot be (currently) changed at runtime. We'll
still have the possibility to select the display from multiple options
during boot with the default display option.

This patch accomplishes the above by changing how the output drivers
register the display device. Instead of registering all the devices
given from the board file, we'll only register one. If the default
display option is set, the output driver selects that display from its
displays. If the default display is not set, or the default display is
not one of the output's displays, the output driver selects the first
display.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dpi.c  | 47 ++++++++++++++++++++++++++--------
 drivers/video/omap2/dss/dsi.c  | 51 ++++++++++++++++++++++++++++---------
 drivers/video/omap2/dss/dss.h  |  1 +
 drivers/video/omap2/dss/hdmi.c | 57 +++++++++++++++++++++++++++++++-----------
 drivers/video/omap2/dss/rfbi.c | 47 ++++++++++++++++++++++++++--------
 drivers/video/omap2/dss/sdi.c  | 47 ++++++++++++++++++++++++++--------
 drivers/video/omap2/dss/venc.c | 47 ++++++++++++++++++++++++++--------
 7 files changed, 231 insertions(+), 66 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 703fc1d8ec80..6f9a199a68a2 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -371,10 +371,14 @@ static int __init dpi_init_display(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static void __init dpi_probe_pdata(struct platform_device *pdev)
+static struct omap_dss_device * __init dpi_find_dssdev(struct platform_device *pdev)
 {
 	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
-	int i, r;
+	const char *def_disp_name = dss_get_default_display_name();
+	struct omap_dss_device *def_dssdev;
+	int i;
+
+	def_dssdev = NULL;
 
 	for (i = 0; i < pdata->num_devices; ++i) {
 		struct omap_dss_device *dssdev = pdata->devices[i];
@@ -382,16 +386,39 @@ static void __init dpi_probe_pdata(struct platform_device *pdev)
 		if (dssdev->type != OMAP_DISPLAY_TYPE_DPI)
 			continue;
 
-		r = dpi_init_display(dssdev);
-		if (r) {
-			DSSERR("device %s init failed: %d\n", dssdev->name, r);
-			continue;
+		if (def_dssdev == NULL)
+			def_dssdev = dssdev;
+
+		if (def_disp_name != NULL &&
+				strcmp(dssdev->name, def_disp_name) == 0) {
+			def_dssdev = dssdev;
+			break;
 		}
+	}
 
-		r = omap_dss_register_device(dssdev, &pdev->dev);
-		if (r)
-			DSSERR("device %s register failed: %d\n",
-					dssdev->name, r);
+	return def_dssdev;
+}
+
+static void __init dpi_probe_pdata(struct platform_device *pdev)
+{
+	struct omap_dss_device *dssdev;
+	int r;
+
+	dssdev = dpi_find_dssdev(pdev);
+
+	if (!dssdev)
+		return;
+
+	r = dpi_init_display(dssdev);
+	if (r) {
+		DSSERR("device %s init failed: %d\n", dssdev->name, r);
+		return;
+	}
+
+	r = omap_dss_register_device(dssdev, &pdev->dev);
+	if (r) {
+		DSSERR("device %s register failed: %d\n", dssdev->name, r);
+		return;
 	}
 }
 
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index f7078fc90459..ee9ae526f5c1 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -5006,11 +5006,15 @@ static void dsi_put_clocks(struct platform_device *dsidev)
 		clk_put(dsi->sys_clk);
 }
 
-static void __init dsi_probe_pdata(struct platform_device *dsidev)
+static struct omap_dss_device * __init dsi_find_dssdev(struct platform_device *pdev)
 {
-	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
-	struct omap_dss_board_info *pdata = dsidev->dev.platform_data;
-	int i, r;
+	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
+	struct dsi_data *dsi = dsi_get_dsidrv_data(pdev);
+	const char *def_disp_name = dss_get_default_display_name();
+	struct omap_dss_device *def_dssdev;
+	int i;
+
+	def_dssdev = NULL;
 
 	for (i = 0; i < pdata->num_devices; ++i) {
 		struct omap_dss_device *dssdev = pdata->devices[i];
@@ -5021,16 +5025,39 @@ static void __init dsi_probe_pdata(struct platform_device *dsidev)
 		if (dssdev->phy.dsi.module != dsi->module_id)
 			continue;
 
-		r = dsi_init_display(dssdev);
-		if (r) {
-			DSSERR("device %s init failed: %d\n", dssdev->name, r);
-			continue;
+		if (def_dssdev == NULL)
+			def_dssdev = dssdev;
+
+		if (def_disp_name != NULL &&
+				strcmp(dssdev->name, def_disp_name) == 0) {
+			def_dssdev = dssdev;
+			break;
 		}
+	}
 
-		r = omap_dss_register_device(dssdev, &dsidev->dev);
-		if (r)
-			DSSERR("device %s register failed: %d\n",
-					dssdev->name, r);
+	return def_dssdev;
+}
+
+static void __init dsi_probe_pdata(struct platform_device *dsidev)
+{
+	struct omap_dss_device *dssdev;
+	int r;
+
+	dssdev = dsi_find_dssdev(dsidev);
+
+	if (!dssdev)
+		return;
+
+	r = dsi_init_display(dssdev);
+	if (r) {
+		DSSERR("device %s init failed: %d\n", dssdev->name, r);
+		return;
+	}
+
+	r = omap_dss_register_device(dssdev, &dsidev->dev);
+	if (r) {
+		DSSERR("device %s register failed: %d\n", dssdev->name, r);
+		return;
 	}
 }
 
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 7bac8ee078ad..a977826d850c 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -175,6 +175,7 @@ struct seq_file;
 struct platform_device;
 
 /* core */
+const char *dss_get_default_display_name(void);
 struct bus_type *dss_get_bus(void);
 struct regulator *dss_get_vdds_dsi(void);
 struct regulator *dss_get_vdds_sdi(void);
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index bb07143a2d79..76d100b975e0 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -901,32 +901,61 @@ int hdmi_audio_config(struct omap_dss_audio *audio)
 
 #endif
 
-static void __init hdmi_probe_pdata(struct platform_device *pdev)
+static struct omap_dss_device * __init hdmi_find_dssdev(struct platform_device *pdev)
 {
 	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
-	int r, i;
+	const char *def_disp_name = dss_get_default_display_name();
+	struct omap_dss_device *def_dssdev;
+	int i;
+
+	def_dssdev = NULL;
 
 	for (i = 0; i < pdata->num_devices; ++i) {
 		struct omap_dss_device *dssdev = pdata->devices[i];
-		struct omap_dss_hdmi_data *priv = dssdev->data;
 
 		if (dssdev->type != OMAP_DISPLAY_TYPE_HDMI)
 			continue;
 
-		hdmi.ct_cp_hpd_gpio = priv->ct_cp_hpd_gpio;
-		hdmi.ls_oe_gpio = priv->ls_oe_gpio;
-		hdmi.hpd_gpio = priv->hpd_gpio;
+		if (def_dssdev == NULL)
+			def_dssdev = dssdev;
 
-		r = hdmi_init_display(dssdev);
-		if (r) {
-			DSSERR("device %s init failed: %d\n", dssdev->name, r);
-			continue;
+		if (def_disp_name != NULL &&
+				strcmp(dssdev->name, def_disp_name) == 0) {
+			def_dssdev = dssdev;
+			break;
 		}
+	}
+
+	return def_dssdev;
+}
+
+static void __init hdmi_probe_pdata(struct platform_device *pdev)
+{
+	struct omap_dss_device *dssdev;
+	struct omap_dss_hdmi_data *priv;
+	int r;
 
-		r = omap_dss_register_device(dssdev, &pdev->dev);
-		if (r)
-			DSSERR("device %s register failed: %d\n",
-					dssdev->name, r);
+	dssdev = hdmi_find_dssdev(pdev);
+
+	if (!dssdev)
+		return;
+
+	priv = dssdev->data;
+
+	hdmi.ct_cp_hpd_gpio = priv->ct_cp_hpd_gpio;
+	hdmi.ls_oe_gpio = priv->ls_oe_gpio;
+	hdmi.hpd_gpio = priv->hpd_gpio;
+
+	r = hdmi_init_display(dssdev);
+	if (r) {
+		DSSERR("device %s init failed: %d\n", dssdev->name, r);
+		return;
+	}
+
+	r = omap_dss_register_device(dssdev, &pdev->dev);
+	if (r) {
+		DSSERR("device %s register failed: %d\n", dssdev->name, r);
+		return;
 	}
 }
 
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 845b4e70a28e..1127037cb9d5 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -942,10 +942,14 @@ static int __init rfbi_init_display(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static void __init rfbi_probe_pdata(struct platform_device *pdev)
+static struct omap_dss_device * __init rfbi_find_dssdev(struct platform_device *pdev)
 {
 	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
-	int i, r;
+	const char *def_disp_name = dss_get_default_display_name();
+	struct omap_dss_device *def_dssdev;
+	int i;
+
+	def_dssdev = NULL;
 
 	for (i = 0; i < pdata->num_devices; ++i) {
 		struct omap_dss_device *dssdev = pdata->devices[i];
@@ -953,16 +957,39 @@ static void __init rfbi_probe_pdata(struct platform_device *pdev)
 		if (dssdev->type != OMAP_DISPLAY_TYPE_DBI)
 			continue;
 
-		r = rfbi_init_display(dssdev);
-		if (r) {
-			DSSERR("device %s init failed: %d\n", dssdev->name, r);
-			continue;
+		if (def_dssdev == NULL)
+			def_dssdev = dssdev;
+
+		if (def_disp_name != NULL &&
+				strcmp(dssdev->name, def_disp_name) == 0) {
+			def_dssdev = dssdev;
+			break;
 		}
+	}
+
+	return def_dssdev;
+}
+
+static void __init rfbi_probe_pdata(struct platform_device *pdev)
+{
+	struct omap_dss_device *dssdev;
+	int r;
+
+	dssdev = rfbi_find_dssdev(pdev);
 
-		r = omap_dss_register_device(dssdev, &pdev->dev);
-		if (r)
-			DSSERR("device %s register failed: %d\n",
-				dssdev->name, r);
+	if (!dssdev)
+		return;
+
+	r = rfbi_init_display(dssdev);
+	if (r) {
+		DSSERR("device %s init failed: %d\n", dssdev->name, r);
+		return;
+	}
+
+	r = omap_dss_register_device(dssdev, &pdev->dev);
+	if (r) {
+		DSSERR("device %s register failed: %d\n", dssdev->name, r);
+		return;
 	}
 }
 
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index c9a9045e19f2..0aaa7f35874c 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -195,10 +195,14 @@ static int __init sdi_init_display(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static void __init sdi_probe_pdata(struct platform_device *pdev)
+static struct omap_dss_device * __init sdi_find_dssdev(struct platform_device *pdev)
 {
 	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
-	int i, r;
+	const char *def_disp_name = dss_get_default_display_name();
+	struct omap_dss_device *def_dssdev;
+	int i;
+
+	def_dssdev = NULL;
 
 	for (i = 0; i < pdata->num_devices; ++i) {
 		struct omap_dss_device *dssdev = pdata->devices[i];
@@ -206,16 +210,39 @@ static void __init sdi_probe_pdata(struct platform_device *pdev)
 		if (dssdev->type != OMAP_DISPLAY_TYPE_SDI)
 			continue;
 
-		r = sdi_init_display(dssdev);
-		if (r) {
-			DSSERR("device %s init failed: %d\n", dssdev->name, r);
-			continue;
+		if (def_dssdev == NULL)
+			def_dssdev = dssdev;
+
+		if (def_disp_name != NULL &&
+				strcmp(dssdev->name, def_disp_name) == 0) {
+			def_dssdev = dssdev;
+			break;
 		}
+	}
 
-		r = omap_dss_register_device(dssdev, &pdev->dev);
-		if (r)
-			DSSERR("device %s register failed: %d\n",
-					dssdev->name, r);
+	return def_dssdev;
+}
+
+static void __init sdi_probe_pdata(struct platform_device *pdev)
+{
+	struct omap_dss_device *dssdev;
+	int r;
+
+	dssdev = sdi_find_dssdev(pdev);
+
+	if (!dssdev)
+		return;
+
+	r = sdi_init_display(dssdev);
+	if (r) {
+		DSSERR("device %s init failed: %d\n", dssdev->name, r);
+		return;
+	}
+
+	r = omap_dss_register_device(dssdev, &pdev->dev);
+	if (r) {
+		DSSERR("device %s register failed: %d\n", dssdev->name, r);
+		return;
 	}
 }
 
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 60bfc5801636..b9c0a8f468d2 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -735,10 +735,14 @@ static void venc_put_clocks(void)
 		clk_put(venc.tv_dac_clk);
 }
 
-static void __init venc_probe_pdata(struct platform_device *pdev)
+static struct omap_dss_device * __init venc_find_dssdev(struct platform_device *pdev)
 {
 	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
-	int r, i;
+	const char *def_disp_name = dss_get_default_display_name();
+	struct omap_dss_device *def_dssdev;
+	int i;
+
+	def_dssdev = NULL;
 
 	for (i = 0; i < pdata->num_devices; ++i) {
 		struct omap_dss_device *dssdev = pdata->devices[i];
@@ -746,16 +750,39 @@ static void __init venc_probe_pdata(struct platform_device *pdev)
 		if (dssdev->type != OMAP_DISPLAY_TYPE_VENC)
 			continue;
 
-		r = venc_init_display(dssdev);
-		if (r) {
-			DSSERR("device %s init failed: %d\n", dssdev->name, r);
-			continue;
+		if (def_dssdev == NULL)
+			def_dssdev = dssdev;
+
+		if (def_disp_name != NULL &&
+				strcmp(dssdev->name, def_disp_name) == 0) {
+			def_dssdev = dssdev;
+			break;
 		}
+	}
+
+	return def_dssdev;
+}
+
+static void __init venc_probe_pdata(struct platform_device *pdev)
+{
+	struct omap_dss_device *dssdev;
+	int r;
+
+	dssdev = venc_find_dssdev(pdev);
+
+	if (!dssdev)
+		return;
+
+	r = venc_init_display(dssdev);
+	if (r) {
+		DSSERR("device %s init failed: %d\n", dssdev->name, r);
+		return;
+	}
 
-		r = omap_dss_register_device(dssdev, &pdev->dev);
-		if (r)
-			DSSERR("device %s register failed: %d\n",
-					dssdev->name, r);
+	r = omap_dss_register_device(dssdev, &pdev->dev);
+	if (r) {
+		DSSERR("device %s register failed: %d\n", dssdev->name, r);
+		return;
 	}
 }
 
-- 
cgit v1.2.1


From bcb226a9254d30c0c44bc724c22b7a5d3fadec6a Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 7 Sep 2012 15:21:36 +0300
Subject: OMAPDSS: explicitely initialize dssdev->channel for new displays

HDMI and VENC outputs always use the DIGIT output from DISPC. The dssdev
struct contains "channel" field which is used to specify the DISPC
output for the display, but this was not used for HDMI and VENC.

This patch fills the channel field explicitely for HDMI and VENC
displays so that we can always rely on the channel field.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/hdmi.c | 2 ++
 drivers/video/omap2/dss/venc.c | 2 ++
 2 files changed, 4 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 76d100b975e0..3b10e18efa22 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -946,6 +946,8 @@ static void __init hdmi_probe_pdata(struct platform_device *pdev)
 	hdmi.ls_oe_gpio = priv->ls_oe_gpio;
 	hdmi.hpd_gpio = priv->hpd_gpio;
 
+	dssdev->channel = OMAP_DSS_CHANNEL_DIGIT;
+
 	r = hdmi_init_display(dssdev);
 	if (r) {
 		DSSERR("device %s init failed: %d\n", dssdev->name, r);
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index b9c0a8f468d2..88fa6ea77e74 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -773,6 +773,8 @@ static void __init venc_probe_pdata(struct platform_device *pdev)
 	if (!dssdev)
 		return;
 
+	dssdev->channel = OMAP_DSS_CHANNEL_DIGIT;
+
 	r = venc_init_display(dssdev);
 	if (r) {
 		DSSERR("device %s init failed: %d\n", dssdev->name, r);
-- 
cgit v1.2.1


From 47eb6763ff63126e34785be0ea5f365180595024 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 7 Sep 2012 15:44:30 +0300
Subject: OMAPDSS: handle errors in dss_init_device

Add error handling to dss_init_device(), which has, for some reason,
been missing.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/core.c    |  4 +++-
 drivers/video/omap2/dss/display.c | 23 ++++++++++++++++++-----
 drivers/video/omap2/dss/dss.h     |  2 +-
 3 files changed, 22 insertions(+), 7 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 315f557f1d1a..9315ece90ff1 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -358,7 +358,9 @@ static int dss_driver_probe(struct device *dev)
 				dev_name(dev), dssdev->driver_name,
 				dssdrv->driver.name);
 
-	dss_init_device(core.pdev, dssdev);
+	r = dss_init_device(core.pdev, dssdev);
+	if (r)
+		return r;
 
 	force = core.default_display_name &&
 		strcmp(core.default_display_name, dssdev->name) == 0;
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index 5f09d503d619..f7190109bd91 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -320,26 +320,39 @@ void omapdss_default_get_timings(struct omap_dss_device *dssdev,
 }
 EXPORT_SYMBOL(omapdss_default_get_timings);
 
-void dss_init_device(struct platform_device *pdev,
+int dss_init_device(struct platform_device *pdev,
 		struct omap_dss_device *dssdev)
 {
 	struct device_attribute *attr;
-	int i;
-	int r;
+	int i, r;
 
 	/* create device sysfs files */
 	i = 0;
 	while ((attr = display_sysfs_attrs[i++]) != NULL) {
 		r = device_create_file(&dssdev->dev, attr);
-		if (r)
+		if (r) {
+			for (i = i - 2; i >= 0; i--) {
+				attr = display_sysfs_attrs[i];
+				device_remove_file(&dssdev->dev, attr);
+			}
+
 			DSSERR("failed to create sysfs file\n");
+			return r;
+		}
 	}
 
 	/* create display? sysfs links */
 	r = sysfs_create_link(&pdev->dev.kobj, &dssdev->dev.kobj,
 			dev_name(&dssdev->dev));
-	if (r)
+	if (r) {
+		while ((attr = display_sysfs_attrs[i++]) != NULL)
+			device_remove_file(&dssdev->dev, attr);
+
 		DSSERR("failed to create sysfs display link\n");
+		return r;
+	}
+
+	return 0;
 }
 
 void dss_uninit_device(struct platform_device *pdev,
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index a977826d850c..98e82731c60a 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -228,7 +228,7 @@ int dss_suspend_all_devices(void);
 int dss_resume_all_devices(void);
 void dss_disable_all_devices(void);
 
-void dss_init_device(struct platform_device *pdev,
+int dss_init_device(struct platform_device *pdev,
 		struct omap_dss_device *dssdev);
 void dss_uninit_device(struct platform_device *pdev,
 		struct omap_dss_device *dssdev);
-- 
cgit v1.2.1


From 6b41785836f184df585e33cd6b940852fb9299ed Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 7 Sep 2012 15:21:56 +0300
Subject: OMAPDSS: cleanup dss_recheck_connections

dss_recheck_connections is quite a mess. With the previous commit that
initializes the channel field for HDMI and VENC displays, we can greatly
simplify the dss_recheck_connections.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/overlay.c | 49 +++++----------------------------------
 1 file changed, 6 insertions(+), 43 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index e3d406875afd..1bf05efffe13 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -109,52 +109,15 @@ void dss_init_overlays(struct platform_device *pdev)
  * selected, connect always. */
 void dss_recheck_connections(struct omap_dss_device *dssdev, bool force)
 {
-	int i;
-	struct omap_overlay_manager *lcd_mgr;
-	struct omap_overlay_manager *tv_mgr;
-	struct omap_overlay_manager *lcd2_mgr = NULL;
-	struct omap_overlay_manager *lcd3_mgr = NULL;
 	struct omap_overlay_manager *mgr = NULL;
+	int i;
 
-	lcd_mgr = omap_dss_get_overlay_manager(OMAP_DSS_CHANNEL_LCD);
-	tv_mgr = omap_dss_get_overlay_manager(OMAP_DSS_CHANNEL_DIGIT);
-	if (dss_has_feature(FEAT_MGR_LCD3))
-		lcd3_mgr = omap_dss_get_overlay_manager(OMAP_DSS_CHANNEL_LCD3);
-	if (dss_has_feature(FEAT_MGR_LCD2))
-		lcd2_mgr = omap_dss_get_overlay_manager(OMAP_DSS_CHANNEL_LCD2);
-
-	if (dssdev->channel == OMAP_DSS_CHANNEL_LCD3) {
-		if (!lcd3_mgr->device || force) {
-			if (lcd3_mgr->device)
-				lcd3_mgr->unset_device(lcd3_mgr);
-			lcd3_mgr->set_device(lcd3_mgr, dssdev);
-			mgr = lcd3_mgr;
-		}
-	} else if (dssdev->channel == OMAP_DSS_CHANNEL_LCD2) {
-		if (!lcd2_mgr->device || force) {
-			if (lcd2_mgr->device)
-				lcd2_mgr->unset_device(lcd2_mgr);
-			lcd2_mgr->set_device(lcd2_mgr, dssdev);
-			mgr = lcd2_mgr;
-		}
-	} else if (dssdev->type != OMAP_DISPLAY_TYPE_VENC
-			&& dssdev->type != OMAP_DISPLAY_TYPE_HDMI) {
-		if (!lcd_mgr->device || force) {
-			if (lcd_mgr->device)
-				lcd_mgr->unset_device(lcd_mgr);
-			lcd_mgr->set_device(lcd_mgr, dssdev);
-			mgr = lcd_mgr;
-		}
-	}
+	mgr =  omap_dss_get_overlay_manager(dssdev->channel);
 
-	if (dssdev->type == OMAP_DISPLAY_TYPE_VENC
-			|| dssdev->type == OMAP_DISPLAY_TYPE_HDMI) {
-		if (!tv_mgr->device || force) {
-			if (tv_mgr->device)
-				tv_mgr->unset_device(tv_mgr);
-			tv_mgr->set_device(tv_mgr, dssdev);
-			mgr = tv_mgr;
-		}
+	if (!mgr->device || force) {
+		if (mgr->device)
+			mgr->unset_device(mgr);
+		mgr->set_device(mgr, dssdev);
 	}
 
 	if (mgr) {
-- 
cgit v1.2.1


From 5eeb55f8703d2af3181599c085b21ce023a0f942 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 7 Sep 2012 15:48:45 +0300
Subject: OMAPDSS: cleanup dss_recheck_connections further

Cleanup dss_recheck_connections, move and rename it to a static
dss_init_connections function inside display.c. Improve the function to
return errors, and implement a matching dss_uninit_connections that can
be used to free the mgr->dssdev link.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/core.c    |  5 ----
 drivers/video/omap2/dss/display.c | 62 +++++++++++++++++++++++++++++++++++++--
 drivers/video/omap2/dss/dss.h     |  1 -
 drivers/video/omap2/dss/overlay.c | 32 --------------------
 4 files changed, 60 insertions(+), 40 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 9315ece90ff1..c4fd7687f3a3 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -352,7 +352,6 @@ static int dss_driver_probe(struct device *dev)
 	int r;
 	struct omap_dss_driver *dssdrv = to_dss_driver(dev->driver);
 	struct omap_dss_device *dssdev = to_dss_device(dev);
-	bool force;
 
 	DSSDBG("driver_probe: dev %s/%s, drv %s\n",
 				dev_name(dev), dssdev->driver_name,
@@ -362,10 +361,6 @@ static int dss_driver_probe(struct device *dev)
 	if (r)
 		return r;
 
-	force = core.default_display_name &&
-		strcmp(core.default_display_name, dssdev->name) == 0;
-	dss_recheck_connections(dssdev, force);
-
 	r = dssdrv->probe(dssdev);
 
 	if (r) {
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index f7190109bd91..db83ae81a713 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -320,11 +320,66 @@ void omapdss_default_get_timings(struct omap_dss_device *dssdev,
 }
 EXPORT_SYMBOL(omapdss_default_get_timings);
 
+/*
+ * Connect dssdev to a manager if the manager is free or if force is specified.
+ * Connect all overlays to that manager if they are free or if force is
+ * specified.
+ */
+static int dss_init_connections(struct omap_dss_device *dssdev, bool force)
+{
+	struct omap_overlay_manager *mgr;
+	int i, r;
+
+	WARN_ON(dssdev->manager);
+
+	mgr = omap_dss_get_overlay_manager(dssdev->channel);
+
+	if (mgr->device && !force)
+		return 0;
+
+	if (mgr->device)
+		mgr->unset_device(mgr);
+
+	r = mgr->set_device(mgr, dssdev);
+	if (r) {
+		DSSERR("failed to set initial manager\n");
+		return r;
+	}
+
+	for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
+		struct omap_overlay *ovl = omap_dss_get_overlay(i);
+
+		if (!ovl->manager || force) {
+			if (ovl->manager)
+				ovl->unset_manager(ovl);
+
+			r = ovl->set_manager(ovl, mgr);
+			if (r) {
+				DSSERR("failed to set initial overlay\n");
+				return r;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static void dss_uninit_connections(struct omap_dss_device *dssdev)
+{
+	if (dssdev->manager)
+		dssdev->manager->unset_device(dssdev->manager);
+}
+
 int dss_init_device(struct platform_device *pdev,
 		struct omap_dss_device *dssdev)
 {
 	struct device_attribute *attr;
 	int i, r;
+	const char *def_disp_name = dss_get_default_display_name();
+	bool force;
+
+	force = def_disp_name && strcmp(def_disp_name, dssdev->name) == 0;
+	dss_init_connections(dssdev, force);
 
 	/* create device sysfs files */
 	i = 0;
@@ -336,6 +391,8 @@ int dss_init_device(struct platform_device *pdev,
 				device_remove_file(&dssdev->dev, attr);
 			}
 
+			dss_uninit_connections(dssdev);
+
 			DSSERR("failed to create sysfs file\n");
 			return r;
 		}
@@ -348,6 +405,8 @@ int dss_init_device(struct platform_device *pdev,
 		while ((attr = display_sysfs_attrs[i++]) != NULL)
 			device_remove_file(&dssdev->dev, attr);
 
+		dss_uninit_connections(dssdev);
+
 		DSSERR("failed to create sysfs display link\n");
 		return r;
 	}
@@ -366,8 +425,7 @@ void dss_uninit_device(struct platform_device *pdev,
 	while ((attr = display_sysfs_attrs[i++]) != NULL)
 		device_remove_file(&dssdev->dev, attr);
 
-	if (dssdev->manager)
-		dssdev->manager->unset_device(dssdev->manager);
+	dss_uninit_connections(dssdev);
 }
 
 static int dss_suspend_device(struct device *dev, void *data)
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 98e82731c60a..7a3fea66b411 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -263,7 +263,6 @@ void dss_manager_kobj_uninit(struct omap_overlay_manager *mgr);
 void dss_init_overlays(struct platform_device *pdev);
 void dss_uninit_overlays(struct platform_device *pdev);
 void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr);
-void dss_recheck_connections(struct omap_dss_device *dssdev, bool force);
 int dss_ovl_simple_check(struct omap_overlay *ovl,
 		const struct omap_overlay_info *info);
 int dss_ovl_check(struct omap_overlay *ovl, struct omap_overlay_info *info,
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 1bf05efffe13..52455a0609cb 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -105,38 +105,6 @@ void dss_init_overlays(struct platform_device *pdev)
 	}
 }
 
-/* connect overlays to the new device, if not already connected. if force
- * selected, connect always. */
-void dss_recheck_connections(struct omap_dss_device *dssdev, bool force)
-{
-	struct omap_overlay_manager *mgr = NULL;
-	int i;
-
-	mgr =  omap_dss_get_overlay_manager(dssdev->channel);
-
-	if (!mgr->device || force) {
-		if (mgr->device)
-			mgr->unset_device(mgr);
-		mgr->set_device(mgr, dssdev);
-	}
-
-	if (mgr) {
-		dispc_runtime_get();
-
-		for (i = 0; i < dss_feat_get_num_ovls(); i++) {
-			struct omap_overlay *ovl;
-			ovl = omap_dss_get_overlay(i);
-			if (!ovl->manager || force) {
-				if (ovl->manager)
-					ovl->unset_manager(ovl);
-				ovl->set_manager(ovl, mgr);
-			}
-		}
-
-		dispc_runtime_put();
-	}
-}
-
 void dss_uninit_overlays(struct platform_device *pdev)
 {
 	int i;
-- 
cgit v1.2.1


From 5274484b821bb2cf34a697624ef14084c31b16ce Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 10 Sep 2012 13:58:29 +0300
Subject: OMAPDSS: alloc dssdevs dynamically

We currently create omap_dss_devices statically in board files, and use
those devices directly in the omapdss driver. This model prevents us
from having the platform data (which the dssdevs in board files
practically are) as read-only, and it's also different than what we will
use with device tree.

This patch changes the model to be in line with DT model: we allocate
the dssdevs dynamically, and initialize them according to the data in
the board file's dssdev (basically we memcopy the dssdev fields).

The allocation and registration is done in the following steps in the
output drivers:

- Use dss_alloc_and_init_device to allocate and initialize the device.
  The function uses kalloc and device_initialize to accomplish this.
- Call dss_copy_device_pdata to copy the data from the board file's
  dssdev
- Use dss_add_device to register the device.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/core.c | 72 +++++++++++++++++++++---------------------
 drivers/video/omap2/dss/dpi.c  | 17 +++++++---
 drivers/video/omap2/dss/dsi.c  | 15 +++++++--
 drivers/video/omap2/dss/dss.h  | 11 ++++---
 drivers/video/omap2/dss/hdmi.c | 15 +++++++--
 drivers/video/omap2/dss/rfbi.c | 17 +++++++---
 drivers/video/omap2/dss/sdi.c  | 17 +++++++---
 drivers/video/omap2/dss/venc.c | 17 +++++++---
 8 files changed, 119 insertions(+), 62 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index c4fd7687f3a3..b2af72dc20bd 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -33,6 +33,7 @@
 #include <linux/device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/suspend.h>
+#include <linux/slab.h>
 
 #include <video/omapdss.h>
 
@@ -418,55 +419,44 @@ void omap_dss_unregister_driver(struct omap_dss_driver *dssdriver)
 EXPORT_SYMBOL(omap_dss_unregister_driver);
 
 /* DEVICE */
-static void reset_device(struct device *dev, int check)
-{
-	u8 *dev_p = (u8 *)dev;
-	u8 *dev_end = dev_p + sizeof(*dev);
-	void *saved_pdata;
-
-	saved_pdata = dev->platform_data;
-	if (check) {
-		/*
-		 * Check if there is any other setting than platform_data
-		 * in struct device; warn that these will be reset by our
-		 * init.
-		 */
-		dev->platform_data = NULL;
-		while (dev_p < dev_end) {
-			if (*dev_p) {
-				WARN("%s: struct device fields will be "
-						"discarded\n",
-				     __func__);
-				break;
-			}
-			dev_p++;
-		}
-	}
-	memset(dev, 0, sizeof(*dev));
-	dev->platform_data = saved_pdata;
-}
-
 
 static void omap_dss_dev_release(struct device *dev)
 {
-	reset_device(dev, 0);
+	struct omap_dss_device *dssdev = to_dss_device(dev);
+	kfree(dssdev);
 }
 
 static int disp_num_counter;
 
-int omap_dss_register_device(struct omap_dss_device *dssdev,
-		struct device *parent)
+struct omap_dss_device *dss_alloc_and_init_device(struct device *parent)
 {
-	reset_device(&dssdev->dev, 1);
+	struct omap_dss_device *dssdev;
+
+	dssdev = kzalloc(sizeof(*dssdev), GFP_KERNEL);
+	if (!dssdev)
+		return NULL;
 
 	dssdev->dev.bus = &dss_bus_type;
 	dssdev->dev.parent = parent;
 	dssdev->dev.release = omap_dss_dev_release;
 	dev_set_name(&dssdev->dev, "display%d", disp_num_counter++);
-	return device_register(&dssdev->dev);
+
+	device_initialize(&dssdev->dev);
+
+	return dssdev;
 }
 
-void omap_dss_unregister_device(struct omap_dss_device *dssdev)
+int dss_add_device(struct omap_dss_device *dssdev)
+{
+	return device_add(&dssdev->dev);
+}
+
+void dss_put_device(struct omap_dss_device *dssdev)
+{
+	put_device(&dssdev->dev);
+}
+
+void dss_unregister_device(struct omap_dss_device *dssdev)
 {
 	device_unregister(&dssdev->dev);
 }
@@ -474,15 +464,25 @@ void omap_dss_unregister_device(struct omap_dss_device *dssdev)
 static int dss_unregister_dss_dev(struct device *dev, void *data)
 {
 	struct omap_dss_device *dssdev = to_dss_device(dev);
-	omap_dss_unregister_device(dssdev);
+	dss_unregister_device(dssdev);
 	return 0;
 }
 
-void omap_dss_unregister_child_devices(struct device *parent)
+void dss_unregister_child_devices(struct device *parent)
 {
 	device_for_each_child(parent, NULL, dss_unregister_dss_dev);
 }
 
+void dss_copy_device_pdata(struct omap_dss_device *dst,
+		const struct omap_dss_device *src)
+{
+	u8 *d = (u8 *)dst;
+	u8 *s = (u8 *)src;
+	size_t dsize = sizeof(struct device);
+
+	memcpy(d + dsize, s + dsize, sizeof(struct omap_dss_device) - dsize);
+}
+
 /* BUS */
 static int __init omap_dss_bus_register(void)
 {
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 6f9a199a68a2..fac19d39ab18 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -399,25 +399,34 @@ static struct omap_dss_device * __init dpi_find_dssdev(struct platform_device *p
 	return def_dssdev;
 }
 
-static void __init dpi_probe_pdata(struct platform_device *pdev)
+static void __init dpi_probe_pdata(struct platform_device *dpidev)
 {
+	struct omap_dss_device *plat_dssdev;
 	struct omap_dss_device *dssdev;
 	int r;
 
-	dssdev = dpi_find_dssdev(pdev);
+	plat_dssdev = dpi_find_dssdev(dpidev);
 
+	if (!plat_dssdev)
+		return;
+
+	dssdev = dss_alloc_and_init_device(&dpidev->dev);
 	if (!dssdev)
 		return;
 
+	dss_copy_device_pdata(dssdev, plat_dssdev);
+
 	r = dpi_init_display(dssdev);
 	if (r) {
 		DSSERR("device %s init failed: %d\n", dssdev->name, r);
+		dss_put_device(dssdev);
 		return;
 	}
 
-	r = omap_dss_register_device(dssdev, &pdev->dev);
+	r = dss_add_device(dssdev);
 	if (r) {
 		DSSERR("device %s register failed: %d\n", dssdev->name, r);
+		dss_put_device(dssdev);
 		return;
 	}
 }
@@ -433,7 +442,7 @@ static int __init omap_dpi_probe(struct platform_device *pdev)
 
 static int __exit omap_dpi_remove(struct platform_device *pdev)
 {
-	omap_dss_unregister_child_devices(&pdev->dev);
+	dss_unregister_child_devices(&pdev->dev);
 
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index ee9ae526f5c1..1dd019cf9649 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -5040,23 +5040,32 @@ static struct omap_dss_device * __init dsi_find_dssdev(struct platform_device *p
 
 static void __init dsi_probe_pdata(struct platform_device *dsidev)
 {
+	struct omap_dss_device *plat_dssdev;
 	struct omap_dss_device *dssdev;
 	int r;
 
-	dssdev = dsi_find_dssdev(dsidev);
+	plat_dssdev = dsi_find_dssdev(dsidev);
 
+	if (!plat_dssdev)
+		return;
+
+	dssdev = dss_alloc_and_init_device(&dsidev->dev);
 	if (!dssdev)
 		return;
 
+	dss_copy_device_pdata(dssdev, plat_dssdev);
+
 	r = dsi_init_display(dssdev);
 	if (r) {
 		DSSERR("device %s init failed: %d\n", dssdev->name, r);
+		dss_put_device(dssdev);
 		return;
 	}
 
-	r = omap_dss_register_device(dssdev, &dsidev->dev);
+	r = dss_add_device(dssdev);
 	if (r) {
 		DSSERR("device %s register failed: %d\n", dssdev->name, r);
+		dss_put_device(dssdev);
 		return;
 	}
 }
@@ -5184,7 +5193,7 @@ static int __exit omap_dsihw_remove(struct platform_device *dsidev)
 
 	WARN_ON(dsi->scp_clk_refcount > 0);
 
-	omap_dss_unregister_child_devices(&dsidev->dev);
+	dss_unregister_child_devices(&dsidev->dev);
 
 	pm_runtime_disable(&dsidev->dev);
 
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 7a3fea66b411..417d30571747 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -185,10 +185,13 @@ void dss_dsi_disable_pads(int dsi_id, unsigned lane_mask);
 int dss_set_min_bus_tput(struct device *dev, unsigned long tput);
 int dss_debugfs_create_file(const char *name, void (*write)(struct seq_file *));
 
-int omap_dss_register_device(struct omap_dss_device *dssdev,
-		struct device *parent);
-void omap_dss_unregister_device(struct omap_dss_device *dssdev);
-void omap_dss_unregister_child_devices(struct device *parent);
+struct omap_dss_device *dss_alloc_and_init_device(struct device *parent);
+int dss_add_device(struct omap_dss_device *dssdev);
+void dss_unregister_device(struct omap_dss_device *dssdev);
+void dss_unregister_child_devices(struct device *parent);
+void dss_put_device(struct omap_dss_device *dssdev);
+void dss_copy_device_pdata(struct omap_dss_device *dst,
+		const struct omap_dss_device *src);
 
 /* apply */
 void dss_apply_init(void);
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 3b10e18efa22..23daf7dcf54a 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -931,15 +931,22 @@ static struct omap_dss_device * __init hdmi_find_dssdev(struct platform_device *
 
 static void __init hdmi_probe_pdata(struct platform_device *pdev)
 {
+	struct omap_dss_device *plat_dssdev;
 	struct omap_dss_device *dssdev;
 	struct omap_dss_hdmi_data *priv;
 	int r;
 
-	dssdev = hdmi_find_dssdev(pdev);
+	plat_dssdev = hdmi_find_dssdev(pdev);
 
+	if (!plat_dssdev)
+		return;
+
+	dssdev = dss_alloc_and_init_device(&pdev->dev);
 	if (!dssdev)
 		return;
 
+	dss_copy_device_pdata(dssdev, plat_dssdev);
+
 	priv = dssdev->data;
 
 	hdmi.ct_cp_hpd_gpio = priv->ct_cp_hpd_gpio;
@@ -951,12 +958,14 @@ static void __init hdmi_probe_pdata(struct platform_device *pdev)
 	r = hdmi_init_display(dssdev);
 	if (r) {
 		DSSERR("device %s init failed: %d\n", dssdev->name, r);
+		dss_put_device(dssdev);
 		return;
 	}
 
-	r = omap_dss_register_device(dssdev, &pdev->dev);
+	r = dss_add_device(dssdev);
 	if (r) {
 		DSSERR("device %s register failed: %d\n", dssdev->name, r);
+		dss_put_device(dssdev);
 		return;
 	}
 }
@@ -1020,7 +1029,7 @@ static int __exit omapdss_hdmihw_remove(struct platform_device *pdev)
 {
 	device_for_each_child(&pdev->dev, NULL, hdmi_remove_child);
 
-	omap_dss_unregister_child_devices(&pdev->dev);
+	dss_unregister_child_devices(&pdev->dev);
 
 	hdmi_panel_exit();
 
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 1127037cb9d5..38d9b8ecbe3c 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -970,25 +970,34 @@ static struct omap_dss_device * __init rfbi_find_dssdev(struct platform_device *
 	return def_dssdev;
 }
 
-static void __init rfbi_probe_pdata(struct platform_device *pdev)
+static void __init rfbi_probe_pdata(struct platform_device *rfbidev)
 {
+	struct omap_dss_device *plat_dssdev;
 	struct omap_dss_device *dssdev;
 	int r;
 
-	dssdev = rfbi_find_dssdev(pdev);
+	plat_dssdev = rfbi_find_dssdev(rfbidev);
 
+	if (!plat_dssdev)
+		return;
+
+	dssdev = dss_alloc_and_init_device(&rfbidev->dev);
 	if (!dssdev)
 		return;
 
+	dss_copy_device_pdata(dssdev, plat_dssdev);
+
 	r = rfbi_init_display(dssdev);
 	if (r) {
 		DSSERR("device %s init failed: %d\n", dssdev->name, r);
+		dss_put_device(dssdev);
 		return;
 	}
 
-	r = omap_dss_register_device(dssdev, &pdev->dev);
+	r = dss_add_device(dssdev);
 	if (r) {
 		DSSERR("device %s register failed: %d\n", dssdev->name, r);
+		dss_put_device(dssdev);
 		return;
 	}
 }
@@ -1055,7 +1064,7 @@ err_runtime_get:
 
 static int __exit omap_rfbihw_remove(struct platform_device *pdev)
 {
-	omap_dss_unregister_child_devices(&pdev->dev);
+	dss_unregister_child_devices(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 0aaa7f35874c..919ff728c502 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -223,25 +223,34 @@ static struct omap_dss_device * __init sdi_find_dssdev(struct platform_device *p
 	return def_dssdev;
 }
 
-static void __init sdi_probe_pdata(struct platform_device *pdev)
+static void __init sdi_probe_pdata(struct platform_device *sdidev)
 {
+	struct omap_dss_device *plat_dssdev;
 	struct omap_dss_device *dssdev;
 	int r;
 
-	dssdev = sdi_find_dssdev(pdev);
+	plat_dssdev = sdi_find_dssdev(sdidev);
 
+	if (!plat_dssdev)
+		return;
+
+	dssdev = dss_alloc_and_init_device(&sdidev->dev);
 	if (!dssdev)
 		return;
 
+	dss_copy_device_pdata(dssdev, plat_dssdev);
+
 	r = sdi_init_display(dssdev);
 	if (r) {
 		DSSERR("device %s init failed: %d\n", dssdev->name, r);
+		dss_put_device(dssdev);
 		return;
 	}
 
-	r = omap_dss_register_device(dssdev, &pdev->dev);
+	r = dss_add_device(dssdev);
 	if (r) {
 		DSSERR("device %s register failed: %d\n", dssdev->name, r);
+		dss_put_device(dssdev);
 		return;
 	}
 }
@@ -255,7 +264,7 @@ static int __init omap_sdi_probe(struct platform_device *pdev)
 
 static int __exit omap_sdi_remove(struct platform_device *pdev)
 {
-	omap_dss_unregister_child_devices(&pdev->dev);
+	dss_unregister_child_devices(&pdev->dev);
 
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 88fa6ea77e74..996779c0204c 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -763,27 +763,36 @@ static struct omap_dss_device * __init venc_find_dssdev(struct platform_device *
 	return def_dssdev;
 }
 
-static void __init venc_probe_pdata(struct platform_device *pdev)
+static void __init venc_probe_pdata(struct platform_device *vencdev)
 {
+	struct omap_dss_device *plat_dssdev;
 	struct omap_dss_device *dssdev;
 	int r;
 
-	dssdev = venc_find_dssdev(pdev);
+	plat_dssdev = venc_find_dssdev(vencdev);
 
+	if (!plat_dssdev)
+		return;
+
+	dssdev = dss_alloc_and_init_device(&vencdev->dev);
 	if (!dssdev)
 		return;
 
+	dss_copy_device_pdata(dssdev, plat_dssdev);
+
 	dssdev->channel = OMAP_DSS_CHANNEL_DIGIT;
 
 	r = venc_init_display(dssdev);
 	if (r) {
 		DSSERR("device %s init failed: %d\n", dssdev->name, r);
+		dss_put_device(dssdev);
 		return;
 	}
 
-	r = omap_dss_register_device(dssdev, &pdev->dev);
+	r = dss_add_device(dssdev);
 	if (r) {
 		DSSERR("device %s register failed: %d\n", dssdev->name, r);
+		dss_put_device(dssdev);
 		return;
 	}
 }
@@ -848,7 +857,7 @@ err_runtime_get:
 
 static int __exit omap_venchw_remove(struct platform_device *pdev)
 {
-	omap_dss_unregister_child_devices(&pdev->dev);
+	dss_unregister_child_devices(&pdev->dev);
 
 	if (venc.vdda_dac_reg != NULL) {
 		regulator_put(venc.vdda_dac_reg);
-- 
cgit v1.2.1


From d66b15818c16af35ddb5da7b53905d9f6f62a45b Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 24 Sep 2012 15:15:06 +0300
Subject: OMAPDSS: DSI: improve DSI clock calcs for DISPC

Commit ee144e645a081daad5de1ccac77f0a0e98e6a67b added
dsi_pll_calc_ddrfreq() which calculates PLL dividers based on given DSI
bus clock speed. The function works ok, but it can be improved for the
DISPC clock calc.

The current version calculates the clock going from the PLL to the DISPC
simply by setting the clock as close to DISPC maximum as possible, and
the pixel clock is calculated based on that.

This patch changes the function to calculate DISPC clock more
dynamically, iterating through different DISPC clocks and pixel clock
values, and thus we'll get more suitable pixel clocks.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dsi.c | 144 +++++++++++++++++++++++++++++++++---------
 1 file changed, 113 insertions(+), 31 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 8d815e39e45d..8d47fb7c4b8f 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1454,26 +1454,17 @@ found:
 }
 
 static int dsi_pll_calc_ddrfreq(struct platform_device *dsidev,
-		unsigned long req_clk, struct dsi_clock_info *cinfo)
+		unsigned long req_clkin4ddr, struct dsi_clock_info *cinfo)
 {
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	struct dsi_clock_info cur, best;
-	unsigned long dss_sys_clk, max_dss_fck, max_dsi_fck;
-	unsigned long req_clkin4ddr;
 
 	DSSDBG("dsi_pll_calc_ddrfreq\n");
 
-	dss_sys_clk = clk_get_rate(dsi->sys_clk);
-
-	max_dss_fck = dss_feat_get_param_max(FEAT_PARAM_DSS_FCK);
-	max_dsi_fck = dss_feat_get_param_max(FEAT_PARAM_DSI_FCK);
-
 	memset(&best, 0, sizeof(best));
 	memset(&cur, 0, sizeof(cur));
 
-	cur.clkin = dss_sys_clk;
-
-	req_clkin4ddr = req_clk * 4;
+	cur.clkin = clk_get_rate(dsi->sys_clk);
 
 	for (cur.regn = 1; cur.regn < dsi->regn_max; ++cur.regn) {
 		cur.fint = cur.clkin / cur.regn;
@@ -1503,18 +1494,107 @@ static int dsi_pll_calc_ddrfreq(struct platform_device *dsidev,
 		}
 	}
 found:
-	best.regm_dispc = DIV_ROUND_UP(best.clkin4ddr, max_dss_fck);
-	best.dsi_pll_hsdiv_dispc_clk = best.clkin4ddr / best.regm_dispc;
-
-	best.regm_dsi = DIV_ROUND_UP(best.clkin4ddr, max_dsi_fck);
-	best.dsi_pll_hsdiv_dsi_clk = best.clkin4ddr / best.regm_dsi;
-
 	if (cinfo)
 		*cinfo = best;
 
 	return 0;
 }
 
+static void dsi_pll_calc_dsi_fck(struct platform_device *dsidev,
+		struct dsi_clock_info *cinfo)
+{
+	unsigned long max_dsi_fck;
+
+	max_dsi_fck = dss_feat_get_param_max(FEAT_PARAM_DSI_FCK);
+
+	cinfo->regm_dsi = DIV_ROUND_UP(cinfo->clkin4ddr, max_dsi_fck);
+	cinfo->dsi_pll_hsdiv_dsi_clk = cinfo->clkin4ddr / cinfo->regm_dsi;
+}
+
+static int dsi_pll_calc_dispc_fck(struct platform_device *dsidev,
+		unsigned long req_pck, struct dsi_clock_info *cinfo,
+		struct dispc_clock_info *dispc_cinfo)
+{
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	unsigned regm_dispc, best_regm_dispc;
+	unsigned long dispc_clk, best_dispc_clk;
+	int min_fck_per_pck;
+	unsigned long max_dss_fck;
+	struct dispc_clock_info best_dispc;
+	bool match;
+
+	max_dss_fck = dss_feat_get_param_max(FEAT_PARAM_DSS_FCK);
+
+	min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK;
+
+	if (min_fck_per_pck &&
+			req_pck * min_fck_per_pck > max_dss_fck) {
+		DSSERR("Requested pixel clock not possible with the current "
+				"OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning "
+				"the constraint off.\n");
+		min_fck_per_pck = 0;
+	}
+
+retry:
+	best_regm_dispc = 0;
+	best_dispc_clk = 0;
+	memset(&best_dispc, 0, sizeof(best_dispc));
+	match = false;
+
+	for (regm_dispc = 1; regm_dispc < dsi->regm_dispc_max; ++regm_dispc) {
+		struct dispc_clock_info cur_dispc;
+
+		dispc_clk = cinfo->clkin4ddr / regm_dispc;
+
+		/* this will narrow down the search a bit,
+		 * but still give pixclocks below what was
+		 * requested */
+		if (dispc_clk  < req_pck)
+			break;
+
+		if (dispc_clk > max_dss_fck)
+			continue;
+
+		if (min_fck_per_pck && dispc_clk < req_pck * min_fck_per_pck)
+			continue;
+
+		match = true;
+
+		dispc_find_clk_divs(req_pck, dispc_clk, &cur_dispc);
+
+		if (abs(cur_dispc.pck - req_pck) <
+				abs(best_dispc.pck - req_pck)) {
+			best_regm_dispc = regm_dispc;
+			best_dispc_clk = dispc_clk;
+			best_dispc = cur_dispc;
+
+			if (cur_dispc.pck == req_pck)
+				goto found;
+		}
+	}
+
+	if (!match) {
+		if (min_fck_per_pck) {
+			DSSERR("Could not find suitable clock settings.\n"
+					"Turning FCK/PCK constraint off and"
+					"trying again.\n");
+			min_fck_per_pck = 0;
+			goto retry;
+		}
+
+		DSSERR("Could not find suitable clock settings.\n");
+
+		return -EINVAL;
+	}
+found:
+	cinfo->regm_dispc = best_regm_dispc;
+	cinfo->dsi_pll_hsdiv_dispc_clk = best_dispc_clk;
+
+	*dispc_cinfo = best_dispc;
+
+	return 0;
+}
+
 int dsi_pll_set_clock_div(struct platform_device *dsidev,
 		struct dsi_clock_info *cinfo)
 {
@@ -4188,33 +4268,35 @@ int omapdss_dsi_set_clocks(struct omap_dss_device *dssdev,
 
 	mutex_lock(&dsi->lock);
 
-	r = dsi_pll_calc_ddrfreq(dsidev, ddr_clk, &cinfo);
+	/* Calculate PLL output clock */
+	r = dsi_pll_calc_ddrfreq(dsidev, ddr_clk * 4, &cinfo);
 	if (r)
 		goto err;
 
-	dssdev->clocks.dsi.regn = cinfo.regn;
-	dssdev->clocks.dsi.regm = cinfo.regm;
-	dssdev->clocks.dsi.regm_dispc = cinfo.regm_dispc;
-	dssdev->clocks.dsi.regm_dsi = cinfo.regm_dsi;
+	/* Calculate PLL's DSI clock */
+	dsi_pll_calc_dsi_fck(dsidev, &cinfo);
 
+	/* Calculate PLL's DISPC clock and pck & lck divs */
+	pck = cinfo.clkin4ddr / 16 * (dsi->num_lanes_used - 1) * 8 / bpp;
+	DSSDBG("finding dispc dividers for pck %lu\n", pck);
+	r = dsi_pll_calc_dispc_fck(dsidev, pck, &cinfo, &dispc_cinfo);
+	if (r)
+		goto err;
 
+	/* Calculate LP clock */
 	dsi_fclk = cinfo.dsi_pll_hsdiv_dsi_clk;
 	lp_clk_div = DIV_ROUND_UP(dsi_fclk, lp_clk * 2);
 
-	dssdev->clocks.dsi.lp_clk_div = lp_clk_div;
-
-	/* pck = TxByteClkHS * datalanes * 8 / bitsperpixel */
-
-	pck = cinfo.clkin4ddr / 16 * (dsi->num_lanes_used - 1) * 8 / bpp;
-
-	DSSDBG("finding dispc dividers for pck %lu\n", pck);
+	dssdev->clocks.dsi.regn = cinfo.regn;
+	dssdev->clocks.dsi.regm = cinfo.regm;
+	dssdev->clocks.dsi.regm_dispc = cinfo.regm_dispc;
+	dssdev->clocks.dsi.regm_dsi = cinfo.regm_dsi;
 
-	dispc_find_clk_divs(pck, cinfo.dsi_pll_hsdiv_dispc_clk, &dispc_cinfo);
+	dssdev->clocks.dsi.lp_clk_div = lp_clk_div;
 
 	dssdev->clocks.dispc.channel.lck_div = dispc_cinfo.lck_div;
 	dssdev->clocks.dispc.channel.pck_div = dispc_cinfo.pck_div;
 
-
 	dssdev->clocks.dispc.dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK;
 
 	dssdev->clocks.dispc.channel.lcd_clk_src =
-- 
cgit v1.2.1


From 233628328037c02cf3db6165cab5d3f43587c5f3 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Sun, 8 Apr 2012 16:47:01 +0530
Subject: OMAPDSS: Add basic omap5 features to dss and dispc

Add basic omap5 features for dss and dispc.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c        |  2 +
 drivers/video/omap2/dss/dss.c          |  8 +++
 drivers/video/omap2/dss/dss_features.c | 93 ++++++++++++++++++++++++++++++++++
 3 files changed, 103 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index d512c389741e..e52c57789383 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3829,6 +3829,8 @@ static int __init dispc_init_features(struct device *dev)
 			src = &omap34xx_rev3_0_dispc_feats;
 	} else if (cpu_is_omap44xx()) {
 		src = &omap44xx_dispc_feats;
+	} else if (soc_is_omap54xx()) {
+		src = &omap44xx_dispc_feats;
 	} else {
 		return -ENODEV;
 	}
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 759dbee48342..4524c174ac50 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -123,6 +123,12 @@ static const struct dss_features omap44xx_dss_feats __initconst = {
 	.clk_name		=	"dpll_per_m5x2_ck",
 };
 
+static const struct dss_features omap54xx_dss_feats __initconst = {
+	.fck_div_max		=	64,
+	.dss_fck_multiplier	=	1,
+	.clk_name		=	"dpll_per_h12x2_ck",
+};
+
 static inline void dss_write_reg(const struct dss_reg idx, u32 val)
 {
 	__raw_writel(val, dss.base + idx.idx);
@@ -740,6 +746,8 @@ static int __init dss_init_features(struct device *dev)
 		src = &omap3630_dss_feats;
 	else if (cpu_is_omap44xx())
 		src = &omap44xx_dss_feats;
+	else if (soc_is_omap54xx())
+		src = &omap54xx_dss_feats;
 	else
 		return -ENODEV;
 
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index c26fc1fb7dbc..af4775a20708 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -106,6 +106,21 @@ static const struct dss_reg_field omap4_dss_reg_fields[] = {
 	[FEAT_REG_DSIPLL_REGM_DSI]		= { 30, 26 },
 };
 
+static const struct dss_reg_field omap5_dss_reg_fields[] = {
+	[FEAT_REG_FIRHINC]			= { 12, 0 },
+	[FEAT_REG_FIRVINC]			= { 28, 16 },
+	[FEAT_REG_FIFOLOWTHRESHOLD]		= { 15, 0 },
+	[FEAT_REG_FIFOHIGHTHRESHOLD]		= { 31, 16 },
+	[FEAT_REG_FIFOSIZE]			= { 15, 0 },
+	[FEAT_REG_HORIZONTALACCU]		= { 10, 0 },
+	[FEAT_REG_VERTICALACCU]			= { 26, 16 },
+	[FEAT_REG_DISPC_CLK_SWITCH]		= { 9, 7 },
+	[FEAT_REG_DSIPLL_REGN]			= { 8, 1 },
+	[FEAT_REG_DSIPLL_REGM]			= { 20, 9 },
+	[FEAT_REG_DSIPLL_REGM_DISPC]		= { 25, 21 },
+	[FEAT_REG_DSIPLL_REGM_DSI]		= { 30, 26 },
+};
+
 static const enum omap_display_type omap2_dss_supported_displays[] = {
 	/* OMAP_DSS_CHANNEL_LCD */
 	OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI,
@@ -144,6 +159,19 @@ static const enum omap_display_type omap4_dss_supported_displays[] = {
 	OMAP_DISPLAY_TYPE_DSI,
 };
 
+static const enum omap_display_type omap5_dss_supported_displays[] = {
+	/* OMAP_DSS_CHANNEL_LCD */
+	OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI |
+	OMAP_DISPLAY_TYPE_DSI,
+
+	/* OMAP_DSS_CHANNEL_DIGIT */
+	OMAP_DISPLAY_TYPE_HDMI | OMAP_DISPLAY_TYPE_DPI,
+
+	/* OMAP_DSS_CHANNEL_LCD2 */
+	OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI |
+	OMAP_DISPLAY_TYPE_DSI,
+};
+
 static const enum omap_color_mode omap2_dss_supported_color_modes[] = {
 	/* OMAP_DSS_GFX */
 	OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
@@ -298,6 +326,14 @@ static const char * const omap4_dss_clk_source_names[] = {
 	[OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI]	= "PLL2_CLK2",
 };
 
+static const char * const omap5_dss_clk_source_names[] = {
+	[OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC]	= "DPLL_DSI1_A_CLK1",
+	[OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI]	= "DPLL_DSI1_A_CLK2",
+	[OMAP_DSS_CLK_SRC_FCK]			= "DSS_CLK",
+	[OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC]	= "DPLL_DSI1_C_CLK1",
+	[OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI]	= "DPLL_DSI1_C_CLK2",
+};
+
 static const struct dss_param_range omap2_dss_param_range[] = {
 	[FEAT_PARAM_DSS_FCK]			= { 0, 173000000 },
 	[FEAT_PARAM_DSS_PCD]			= { 2, 255 },
@@ -349,6 +385,22 @@ static const struct dss_param_range omap4_dss_param_range[] = {
 	[FEAT_PARAM_MGR_HEIGHT]			= { 1, 2048 },
 };
 
+static const struct dss_param_range omap5_dss_param_range[] = {
+	[FEAT_PARAM_DSS_FCK]			= { 0, 200000000 },
+	[FEAT_PARAM_DSS_PCD]			= { 1, 255 },
+	[FEAT_PARAM_DSIPLL_REGN]		= { 0, (1 << 8) - 1 },
+	[FEAT_PARAM_DSIPLL_REGM]		= { 0, (1 << 12) - 1 },
+	[FEAT_PARAM_DSIPLL_REGM_DISPC]		= { 0, (1 << 5) - 1 },
+	[FEAT_PARAM_DSIPLL_REGM_DSI]		= { 0, (1 << 5) - 1 },
+	[FEAT_PARAM_DSIPLL_FINT]		= { 500000, 2500000 },
+	[FEAT_PARAM_DSIPLL_LPDIV]		= { 0, (1 << 13) - 1 },
+	[FEAT_PARAM_DSI_FCK]			= { 0, 170000000 },
+	[FEAT_PARAM_DOWNSCALE]			= { 1, 4 },
+	[FEAT_PARAM_LINEWIDTH]			= { 1, 2048 },
+	[FEAT_PARAM_MGR_WIDTH]			= { 1, 2048 },
+	[FEAT_PARAM_MGR_HEIGHT]			= { 1, 2048 },
+};
+
 static const enum dss_feat_id omap2_dss_feat_list[] = {
 	FEAT_LCDENABLEPOL,
 	FEAT_LCDENABLESIGNAL,
@@ -450,6 +502,25 @@ static const enum dss_feat_id omap4_dss_feat_list[] = {
 	FEAT_BURST_2D,
 };
 
+static const enum dss_feat_id omap5_dss_feat_list[] = {
+	FEAT_MGR_LCD2,
+	FEAT_CORE_CLK_DIV,
+	FEAT_LCD_CLK_SRC,
+	FEAT_DSI_DCS_CMD_CONFIG_VC,
+	FEAT_DSI_VC_OCP_WIDTH,
+	FEAT_DSI_GNQ,
+	FEAT_HDMI_CTS_SWMODE,
+	FEAT_HDMI_AUDIO_USE_MCLK,
+	FEAT_HANDLE_UV_SEPARATE,
+	FEAT_ATTR2,
+	FEAT_CPR,
+	FEAT_PRELOAD,
+	FEAT_FIR_COEF_V,
+	FEAT_ALPHA_FREE_ZORDER,
+	FEAT_FIFO_MERGE,
+	FEAT_BURST_2D,
+};
+
 /* OMAP2 DSS Features */
 static const struct omap_dss_features omap2_dss_features = {
 	.reg_fields = omap2_dss_reg_fields,
@@ -570,6 +641,26 @@ static const struct omap_dss_features omap4_dss_features = {
 	.burst_size_unit = 16,
 };
 
+/* OMAP5 DSS Features */
+static const struct omap_dss_features omap5_dss_features = {
+	.reg_fields = omap5_dss_reg_fields,
+	.num_reg_fields = ARRAY_SIZE(omap5_dss_reg_fields),
+
+	.features = omap5_dss_feat_list,
+	.num_features = ARRAY_SIZE(omap5_dss_feat_list),
+
+	.num_mgrs = 3,
+	.num_ovls = 4,
+	.supported_displays = omap5_dss_supported_displays,
+	.supported_color_modes = omap4_dss_supported_color_modes,
+	.overlay_caps = omap4_dss_overlay_caps,
+	.clksrc_names = omap5_dss_clk_source_names,
+	.dss_params = omap5_dss_param_range,
+	.supported_rotation_types = OMAP_DSS_ROT_DMA | OMAP_DSS_ROT_TILER,
+	.buffer_size_unit = 16,
+	.burst_size_unit = 16,
+};
+
 #if defined(CONFIG_OMAP4_DSS_HDMI)
 /* HDMI OMAP4 Functions*/
 static const struct ti_hdmi_ip_ops omap4_hdmi_functions = {
@@ -707,6 +798,8 @@ void dss_features_init(void)
 		omap_current_dss_features = &omap4430_es2_0_1_2_dss_features;
 	else if (cpu_is_omap44xx())
 		omap_current_dss_features = &omap4_dss_features;
+	else if (soc_is_omap54xx())
+		omap_current_dss_features = &omap5_dss_features;
 	else
 		DSSWARN("Unsupported OMAP version");
 }
-- 
cgit v1.2.1


From 84273a9593306926af56ad5b4a69029c2886c5de Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 21 Sep 2012 12:03:31 +0300
Subject: OMAPDSS: move dss feats to the end of dss.c

Move dss_features to the end of dss.c the same way they are in dispc.c,
so that we don't have to declare prototypes for static feat-related
functions.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dss.c | 60 +++++++++++++++++++++----------------------
 1 file changed, 30 insertions(+), 30 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 4524c174ac50..660813b01197 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -99,36 +99,6 @@ static const char * const dss_generic_clk_source_names[] = {
 	[OMAP_DSS_CLK_SRC_FCK]			= "DSS_FCK",
 };
 
-static const struct dss_features omap24xx_dss_feats __initconst = {
-	.fck_div_max		=	16,
-	.dss_fck_multiplier	=	2,
-	.clk_name		=	NULL,
-};
-
-static const struct dss_features omap34xx_dss_feats __initconst = {
-	.fck_div_max		=	16,
-	.dss_fck_multiplier	=	2,
-	.clk_name		=	"dpll4_m4_ck",
-};
-
-static const struct dss_features omap3630_dss_feats __initconst = {
-	.fck_div_max		=	32,
-	.dss_fck_multiplier	=	1,
-	.clk_name		=	"dpll4_m4_ck",
-};
-
-static const struct dss_features omap44xx_dss_feats __initconst = {
-	.fck_div_max		=	32,
-	.dss_fck_multiplier	=	1,
-	.clk_name		=	"dpll_per_m5x2_ck",
-};
-
-static const struct dss_features omap54xx_dss_feats __initconst = {
-	.fck_div_max		=	64,
-	.dss_fck_multiplier	=	1,
-	.clk_name		=	"dpll_per_h12x2_ck",
-};
-
 static inline void dss_write_reg(const struct dss_reg idx, u32 val)
 {
 	__raw_writel(val, dss.base + idx.idx);
@@ -727,6 +697,36 @@ void dss_debug_dump_clocks(struct seq_file *s)
 }
 #endif
 
+static const struct dss_features omap24xx_dss_feats __initconst = {
+	.fck_div_max		=	16,
+	.dss_fck_multiplier	=	2,
+	.clk_name		=	NULL,
+};
+
+static const struct dss_features omap34xx_dss_feats __initconst = {
+	.fck_div_max		=	16,
+	.dss_fck_multiplier	=	2,
+	.clk_name		=	"dpll4_m4_ck",
+};
+
+static const struct dss_features omap3630_dss_feats __initconst = {
+	.fck_div_max		=	32,
+	.dss_fck_multiplier	=	1,
+	.clk_name		=	"dpll4_m4_ck",
+};
+
+static const struct dss_features omap44xx_dss_feats __initconst = {
+	.fck_div_max		=	32,
+	.dss_fck_multiplier	=	1,
+	.clk_name		=	"dpll_per_m5x2_ck",
+};
+
+static const struct dss_features omap54xx_dss_feats __initconst = {
+	.fck_div_max		=	64,
+	.dss_fck_multiplier	=	1,
+	.clk_name		=	"dpll_per_h12x2_ck",
+};
+
 static int __init dss_init_features(struct device *dev)
 {
 	const struct dss_features *src;
-- 
cgit v1.2.1


From de09e4555592986219132b518c3f7834a28823cd Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 21 Sep 2012 12:09:54 +0300
Subject: OMAPDSS: Add support for DPI source selection

We can select the video source for DPI output as follows:

OMAP2/3: always LCD1
OMAP4: LCD2 or DIGIT
OMAP5: LCD1/LCD2/LCD3/DIGIT

This patch adds support to select the source, and makes dpi.c call the
function to set the source.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Anders <x0132446@ti.com>
---
 drivers/video/omap2/dss/dpi.c |  5 ++++
 drivers/video/omap2/dss/dss.c | 65 +++++++++++++++++++++++++++++++++++++++++++
 drivers/video/omap2/dss/dss.h |  1 +
 3 files changed, 71 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 5ccce9b69e42..b7233882fcfd 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -203,6 +203,10 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
 	if (r)
 		goto err_get_dispc;
 
+	r = dss_dpi_select_source(dssdev->channel);
+	if (r)
+		goto err_src_sel;
+
 	if (dpi_use_dsi_pll(dssdev)) {
 		r = dsi_runtime_get(dpi.dsidev);
 		if (r)
@@ -237,6 +241,7 @@ err_dsi_pll_init:
 	if (dpi_use_dsi_pll(dssdev))
 		dsi_runtime_put(dpi.dsidev);
 err_get_dsi:
+err_src_sel:
 	dispc_runtime_put();
 err_get_dispc:
 	if (dss_has_feature(FEAT_DPI_USES_VDDS_DSI))
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 660813b01197..2ab1c3e96553 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -69,6 +69,7 @@ struct dss_features {
 	u8 fck_div_max;
 	u8 dss_fck_multiplier;
 	const char *clk_name;
+	int (*dpi_select_source)(enum omap_channel channel);
 };
 
 static struct {
@@ -623,6 +624,65 @@ enum dss_hdmi_venc_clk_source_select dss_get_hdmi_venc_clk_source(void)
 	return REG_GET(DSS_CONTROL, 15, 15);
 }
 
+static int dss_dpi_select_source_omap2_omap3(enum omap_channel channel)
+{
+	if (channel != OMAP_DSS_CHANNEL_LCD)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int dss_dpi_select_source_omap4(enum omap_channel channel)
+{
+	int val;
+
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD2:
+		val = 0;
+		break;
+	case OMAP_DSS_CHANNEL_DIGIT:
+		val = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	REG_FLD_MOD(DSS_CONTROL, val, 17, 17);
+
+	return 0;
+}
+
+static int dss_dpi_select_source_omap5(enum omap_channel channel)
+{
+	int val;
+
+	switch (channel) {
+	case OMAP_DSS_CHANNEL_LCD:
+		val = 1;
+		break;
+	case OMAP_DSS_CHANNEL_LCD2:
+		val = 2;
+		break;
+	case OMAP_DSS_CHANNEL_LCD3:
+		val = 3;
+		break;
+	case OMAP_DSS_CHANNEL_DIGIT:
+		val = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	REG_FLD_MOD(DSS_CONTROL, val, 17, 16);
+
+	return 0;
+}
+
+int dss_dpi_select_source(enum omap_channel channel)
+{
+	return dss.feat->dpi_select_source(channel);
+}
+
 static int dss_get_clocks(void)
 {
 	struct clk *clk;
@@ -701,30 +761,35 @@ static const struct dss_features omap24xx_dss_feats __initconst = {
 	.fck_div_max		=	16,
 	.dss_fck_multiplier	=	2,
 	.clk_name		=	NULL,
+	.dpi_select_source	=	&dss_dpi_select_source_omap2_omap3,
 };
 
 static const struct dss_features omap34xx_dss_feats __initconst = {
 	.fck_div_max		=	16,
 	.dss_fck_multiplier	=	2,
 	.clk_name		=	"dpll4_m4_ck",
+	.dpi_select_source	=	&dss_dpi_select_source_omap2_omap3,
 };
 
 static const struct dss_features omap3630_dss_feats __initconst = {
 	.fck_div_max		=	32,
 	.dss_fck_multiplier	=	1,
 	.clk_name		=	"dpll4_m4_ck",
+	.dpi_select_source	=	&dss_dpi_select_source_omap2_omap3,
 };
 
 static const struct dss_features omap44xx_dss_feats __initconst = {
 	.fck_div_max		=	32,
 	.dss_fck_multiplier	=	1,
 	.clk_name		=	"dpll_per_m5x2_ck",
+	.dpi_select_source	=	&dss_dpi_select_source_omap4,
 };
 
 static const struct dss_features omap54xx_dss_feats __initconst = {
 	.fck_div_max		=	64,
 	.dss_fck_multiplier	=	1,
 	.clk_name		=	"dpll_per_h12x2_ck",
+	.dpi_select_source	=	&dss_dpi_select_source_omap5,
 };
 
 static int __init dss_init_features(struct device *dev)
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 5e9fd7691728..2a51ae99474c 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -277,6 +277,7 @@ void dss_overlay_kobj_uninit(struct omap_overlay *ovl);
 int dss_init_platform_driver(void) __init;
 void dss_uninit_platform_driver(void);
 
+int dss_dpi_select_source(enum omap_channel channel);
 void dss_select_hdmi_venc_clk_source(enum dss_hdmi_venc_clk_source_select);
 enum dss_hdmi_venc_clk_source_select dss_get_hdmi_venc_clk_source(void);
 const char *dss_get_generic_clk_source_name(enum omap_dss_clk_source clk_src);
-- 
cgit v1.2.1


From f8ef3d696651df01029d289f1e15c02d4f566610 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 22 Aug 2012 16:00:31 +0300
Subject: OMAPDSS: DSI: Add FEAT_DSI_PLL_SELFREQDCO

Add FEAT_DSI_PLL_SELFREQDCO. OMAP5's DSI PLL has a new configuration
option that needs to be programmed depending on the PLL's output clock
frequency.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dsi.c          | 12 ++++++++----
 drivers/video/omap2/dss/dss_features.c |  1 +
 drivers/video/omap2/dss/dss_features.h |  1 +
 3 files changed, 10 insertions(+), 4 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 8d47fb7c4b8f..0c3afc2b4696 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1671,18 +1671,22 @@ int dsi_pll_set_clock_div(struct platform_device *dsidev,
 
 	BUG_ON(cinfo->fint < dsi->fint_min || cinfo->fint > dsi->fint_max);
 
+	l = dsi_read_reg(dsidev, DSI_PLL_CONFIGURATION2);
+
 	if (dss_has_feature(FEAT_DSI_PLL_FREQSEL)) {
 		f = cinfo->fint < 1000000 ? 0x3 :
 			cinfo->fint < 1250000 ? 0x4 :
 			cinfo->fint < 1500000 ? 0x5 :
 			cinfo->fint < 1750000 ? 0x6 :
 			0x7;
-	}
-
-	l = dsi_read_reg(dsidev, DSI_PLL_CONFIGURATION2);
 
-	if (dss_has_feature(FEAT_DSI_PLL_FREQSEL))
 		l = FLD_MOD(l, f, 4, 1);	/* DSI_PLL_FREQSEL */
+	} else if (dss_has_feature(FEAT_DSI_PLL_SELFREQDCO)) {
+		f = cinfo->clkin4ddr < 1000000000 ? 0x2 : 0x4;
+
+		l = FLD_MOD(l, f, 4, 1);	/* PLL_SELFREQDCO */
+	}
+
 	l = FLD_MOD(l, 1, 13, 13);		/* DSI_PLL_REFEN */
 	l = FLD_MOD(l, 0, 14, 14);		/* DSIPHY_CLKINEN */
 	l = FLD_MOD(l, 1, 20, 20);		/* DSI_HSDIVBYPASS */
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index af4775a20708..177f6e8d2d7c 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -519,6 +519,7 @@ static const enum dss_feat_id omap5_dss_feat_list[] = {
 	FEAT_ALPHA_FREE_ZORDER,
 	FEAT_FIFO_MERGE,
 	FEAT_BURST_2D,
+	FEAT_DSI_PLL_SELFREQDCO,
 };
 
 /* OMAP2 DSS Features */
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index b81d603310a8..f9b9d28ed312 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -65,6 +65,7 @@ enum dss_feat_id {
 	/* An unknown HW bug causing the normal FIFO thresholds not to work */
 	FEAT_OMAP3_DSI_FIFO_BUG,
 	FEAT_BURST_2D,
+	FEAT_DSI_PLL_SELFREQDCO,
 };
 
 /* DSS register field id */
-- 
cgit v1.2.1


From 6d44610f8321a9aa3bc408026f888872b1390712 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 22 Aug 2012 16:00:40 +0300
Subject: OMAPDSS: DSI: Add FEAT_DSI_PLL_REFSEL

Add FEAT_DSI_PLL_REFSEL. OMAP5's DSI PLL needs configuration to select
the reference clock to be used. We always use SYSCLK.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dsi.c          | 2 ++
 drivers/video/omap2/dss/dss_features.c | 1 +
 drivers/video/omap2/dss/dss_features.h | 1 +
 3 files changed, 4 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 0c3afc2b4696..a16c8b229ea7 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1690,6 +1690,8 @@ int dsi_pll_set_clock_div(struct platform_device *dsidev,
 	l = FLD_MOD(l, 1, 13, 13);		/* DSI_PLL_REFEN */
 	l = FLD_MOD(l, 0, 14, 14);		/* DSIPHY_CLKINEN */
 	l = FLD_MOD(l, 1, 20, 20);		/* DSI_HSDIVBYPASS */
+	if (dss_has_feature(FEAT_DSI_PLL_REFSEL))
+		l = FLD_MOD(l, 3, 22, 21);	/* REF_SYSCLK = sysclk */
 	dsi_write_reg(dsidev, DSI_PLL_CONFIGURATION2, l);
 
 	REG_FLD_MOD(dsidev, DSI_PLL_GO, 1, 0, 0);	/* DSI_PLL_GO */
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 177f6e8d2d7c..46855316d215 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -520,6 +520,7 @@ static const enum dss_feat_id omap5_dss_feat_list[] = {
 	FEAT_FIFO_MERGE,
 	FEAT_BURST_2D,
 	FEAT_DSI_PLL_SELFREQDCO,
+	FEAT_DSI_PLL_REFSEL,
 };
 
 /* OMAP2 DSS Features */
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index f9b9d28ed312..0020bf66f3f5 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -66,6 +66,7 @@ enum dss_feat_id {
 	FEAT_OMAP3_DSI_FIFO_BUG,
 	FEAT_BURST_2D,
 	FEAT_DSI_PLL_SELFREQDCO,
+	FEAT_DSI_PLL_REFSEL,
 };
 
 /* DSS register field id */
-- 
cgit v1.2.1


From 2ac80fbea1018404560294797da86d5e72a807f4 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 22 Aug 2012 16:00:47 +0300
Subject: OMAPDSS: DSI: Add new linebuffer size for OMAP5

OMAP5's DSI has a larger line buffer than earlier OMAPs. This patch adds
support for this to the DSI driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dsi.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index a16c8b229ea7..0dc24f2689c7 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -2155,6 +2155,8 @@ static unsigned dsi_get_line_buf_size(struct platform_device *dsidev)
 		return 1194 * 3;	/* 1194x24 bits */
 	case 6:
 		return 1365 * 3;	/* 1365x24 bits */
+	case 7:
+		return 1920 * 3;	/* 1920x24 bits */
 	default:
 		BUG();
 		return 0;
-- 
cgit v1.2.1


From 77ccbfbb07764841500addb570ad61b9868a964d Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 24 Sep 2012 15:15:57 +0300
Subject: OMAPDSS: DSI: Add code to disable PHY DCC

OMAP5 DSI PHY has DCC (Duty Cycle Corrector) block, and by default DCC
is enabled and thus the PLL clock is divided by 2 to get the DSI DDR
clk. This divider has been 4 for all previous OMAPs, and changing it
needs some reorganization of the code. The DCC can be disabled, and in
that case the divider is back to the old 4.

This patch adds dss feature for the DCC, and adds code to always disable
the DCC.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dsi.c          | 7 +++++++
 drivers/video/omap2/dss/dss_features.c | 1 +
 drivers/video/omap2/dss/dss_features.h | 1 +
 3 files changed, 9 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 0dc24f2689c7..497b219e3706 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -2292,6 +2292,13 @@ static void dsi_cio_timings(struct platform_device *dsidev)
 	r = FLD_MOD(r, tlpx_half, 22, 16);
 	r = FLD_MOD(r, tclk_trail, 15, 8);
 	r = FLD_MOD(r, tclk_zero, 7, 0);
+
+	if (dss_has_feature(FEAT_DSI_PHY_DCC)) {
+		r = FLD_MOD(r, 0, 21, 21);	/* DCCEN = disable */
+		r = FLD_MOD(r, 1, 22, 22);	/* CLKINP_DIVBY2EN = enable */
+		r = FLD_MOD(r, 1, 23, 23);	/* CLKINP_SEL = enable */
+	}
+
 	dsi_write_reg(dsidev, DSI_DSIPHY_CFG1, r);
 
 	r = dsi_read_reg(dsidev, DSI_DSIPHY_CFG2);
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 46855316d215..e650a4a6d004 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -521,6 +521,7 @@ static const enum dss_feat_id omap5_dss_feat_list[] = {
 	FEAT_BURST_2D,
 	FEAT_DSI_PLL_SELFREQDCO,
 	FEAT_DSI_PLL_REFSEL,
+	FEAT_DSI_PHY_DCC,
 };
 
 /* OMAP2 DSS Features */
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index 0020bf66f3f5..aacad863fa22 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -67,6 +67,7 @@ enum dss_feat_id {
 	FEAT_BURST_2D,
 	FEAT_DSI_PLL_SELFREQDCO,
 	FEAT_DSI_PLL_REFSEL,
+	FEAT_DSI_PHY_DCC,
 };
 
 /* DSS register field id */
-- 
cgit v1.2.1


From 995885897ff0ef3dad12fcfbfd0c26e185bf4ac0 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Wed, 22 Aug 2012 15:55:21 +0300
Subject: OMAPDSS: DSI: make OMAP2_DSS_DSI depend on ARCH_OMAP5

Change omapdss Kconfig file to make OMAP2_DSS_DSI depend on ARCH_OMAP5.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig
index b337a8469fd8..80f5390aa136 100644
--- a/drivers/video/omap2/dss/Kconfig
+++ b/drivers/video/omap2/dss/Kconfig
@@ -84,7 +84,7 @@ config OMAP2_DSS_SDI
 
 config OMAP2_DSS_DSI
 	bool "DSI support"
-	depends on ARCH_OMAP3 || ARCH_OMAP4
+	depends on ARCH_OMAP3 || ARCH_OMAP4 || ARCH_OMAP5
         default n
 	help
 	  MIPI DSI (Display Serial Interface) support.
-- 
cgit v1.2.1


From 524d9f48a64dbe1ec3a276b57ac2a422fc14af07 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rapha=C3=ABl=20Ass=C3=A9nat?= <raph@8d.com>
Date: Wed, 19 Sep 2012 15:53:14 -0400
Subject: OMAPDSS: Do not require a VDDS_DSI regulator on AM35xx

On our AM3505 based board, dpi.c complains that there is no VDDS_DSI
regulator and the framebuffer cannot be enabled. However, this check
does not seem to apply to AM3505/17 chips.

This patch adds new features list for AM35xxx, which is the same as for
OMAP3 except the VDDS_DSI is removed.

Signed-off-by: Raphael Assenat <raph@8d.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dss_features.c | 51 ++++++++++++++++++++++++++++++++--
 1 file changed, 49 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index c26fc1fb7dbc..47c15304fe87 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -378,6 +378,25 @@ static const enum dss_feat_id omap3430_dss_feat_list[] = {
 	FEAT_DPI_USES_VDDS_DSI,
 };
 
+static const enum dss_feat_id am35xx_dss_feat_list[] = {
+	FEAT_LCDENABLEPOL,
+	FEAT_LCDENABLESIGNAL,
+	FEAT_PCKFREEENABLE,
+	FEAT_FUNCGATED,
+	FEAT_LINEBUFFERSPLIT,
+	FEAT_ROWREPEATENABLE,
+	FEAT_RESIZECONF,
+	FEAT_DSI_PLL_FREQSEL,
+	FEAT_DSI_REVERSE_TXCLKESC,
+	FEAT_VENC_REQUIRES_TV_DAC_CLK,
+	FEAT_CPR,
+	FEAT_PRELOAD,
+	FEAT_FIR_COEF_V,
+	FEAT_ALPHA_FIXED_ZORDER,
+	FEAT_FIFO_MERGE,
+	FEAT_OMAP3_DSI_FIFO_BUG,
+};
+
 static const enum dss_feat_id omap3630_dss_feat_list[] = {
 	FEAT_LCDENABLEPOL,
 	FEAT_LCDENABLESIGNAL,
@@ -490,6 +509,29 @@ static const struct omap_dss_features omap3430_dss_features = {
 	.burst_size_unit = 8,
 };
 
+/*
+ * AM35xx DSS Features. This is basically OMAP3 DSS Features without the
+ * vdds_dsi regulator.
+ */
+static const struct omap_dss_features am35xx_dss_features = {
+	.reg_fields = omap3_dss_reg_fields,
+	.num_reg_fields = ARRAY_SIZE(omap3_dss_reg_fields),
+
+	.features = am35xx_dss_feat_list,
+	.num_features = ARRAY_SIZE(am35xx_dss_feat_list),
+
+	.num_mgrs = 2,
+	.num_ovls = 3,
+	.supported_displays = omap3430_dss_supported_displays,
+	.supported_color_modes = omap3_dss_supported_color_modes,
+	.overlay_caps = omap3430_dss_overlay_caps,
+	.clksrc_names = omap3_dss_clk_source_names,
+	.dss_params = omap3_dss_param_range,
+	.supported_rotation_types = OMAP_DSS_ROT_DMA | OMAP_DSS_ROT_VRFB,
+	.buffer_size_unit = 1,
+	.burst_size_unit = 8,
+};
+
 static const struct omap_dss_features omap3630_dss_features = {
 	.reg_fields = omap3_dss_reg_fields,
 	.num_reg_fields = ARRAY_SIZE(omap3_dss_reg_fields),
@@ -697,8 +739,13 @@ void dss_features_init(void)
 		omap_current_dss_features = &omap2_dss_features;
 	else if (cpu_is_omap3630())
 		omap_current_dss_features = &omap3630_dss_features;
-	else if (cpu_is_omap34xx())
-		omap_current_dss_features = &omap3430_dss_features;
+	else if (cpu_is_omap34xx()) {
+		if (soc_is_am35xx()) {
+			omap_current_dss_features = &am35xx_dss_features;
+		} else {
+			omap_current_dss_features = &omap3430_dss_features;
+		}
+	}
 	else if (omap_rev() == OMAP4430_REV_ES1_0)
 		omap_current_dss_features = &omap4430_es1_0_dss_features;
 	else if (omap_rev() == OMAP4430_REV_ES2_0 ||
-- 
cgit v1.2.1


From d557a9cf2f4f9286759cdd1937ce98641fa35583 Mon Sep 17 00:00:00 2001
From: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Date: Mon, 24 Sep 2012 12:08:27 +0530
Subject: OMAPDSS: DISPC: Add predecimation limit for TILER based rotations

In OMAP4 and OMAP5 when TILER 2D burst mode is used, a maximum of one line can
be skipped as per the respective TRMs. The MBlockStride OCP signal, which is
sum of ROWINC and image width in memory, is only 17 bits wide. In 2D mode TILER
supports 8192, 16384, 32768 and 65536 values of MBlockStride. In case when 2 or
more lines are skipped the ROWINC value exceeds 65536 resulting in OCP errors.
So, maximum vertical predecimation achievable is 2.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index e52c57789383..2137d2a2cc5d 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -2195,7 +2195,8 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 		const struct omap_video_timings *mgr_timings,
 		u16 width, u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode, bool *five_taps,
-		int *x_predecim, int *y_predecim, u16 pos_x)
+		int *x_predecim, int *y_predecim, u16 pos_x,
+		enum omap_dss_rotation_type rotation_type)
 {
 	struct omap_overlay *ovl = omap_dss_get_overlay(plane);
 	const int maxdownscale = dss_feat_get_param_max(FEAT_PARAM_DOWNSCALE);
@@ -2210,7 +2211,8 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 		return -EINVAL;
 
 	*x_predecim = max_decim_limit;
-	*y_predecim = max_decim_limit;
+	*y_predecim = (rotation_type == OMAP_DSS_ROT_TILER &&
+			dss_has_feature(FEAT_BURST_2D)) ? 2 : max_decim_limit;
 
 	if (color_mode == OMAP_DSS_COLOR_CLUT1 ||
 	    color_mode == OMAP_DSS_COLOR_CLUT2 ||
@@ -2306,7 +2308,8 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 
 	r = dispc_ovl_calc_scaling(plane, channel, mgr_timings, in_width,
 			in_height, out_width, out_height, oi->color_mode,
-			&five_taps, &x_predecim, &y_predecim, oi->pos_x);
+			&five_taps, &x_predecim, &y_predecim, oi->pos_x,
+			oi->rotation_type);
 	if (r)
 		return r;
 
-- 
cgit v1.2.1


From e84dc1cc1503150e3bc37268a0b0f0bc0097622c Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Mon, 24 Sep 2012 09:34:52 +0300
Subject: OMAPDSS: DSI: fix tlpx_half reg field length

tlpx_half bit field in DSI_DSIPHY_CFG1 is [20,16], not [22,16] as
accessed in the code currently. Fix this.

The bug should not have caused any problems on OMAP3/4, as the bits
21,22 are unused. They are used on OMAP5, though.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 4d748139315d..abe335abca53 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -2289,7 +2289,7 @@ static void dsi_cio_timings(struct platform_device *dsidev)
 	dsi_write_reg(dsidev, DSI_DSIPHY_CFG0, r);
 
 	r = dsi_read_reg(dsidev, DSI_DSIPHY_CFG1);
-	r = FLD_MOD(r, tlpx_half, 22, 16);
+	r = FLD_MOD(r, tlpx_half, 20, 16);
 	r = FLD_MOD(r, tclk_trail, 15, 8);
 	r = FLD_MOD(r, tclk_zero, 7, 0);
 
@@ -4107,7 +4107,7 @@ static void dsi_proto_timings(struct omap_dss_device *dssdev)
 	ths_exit = FLD_GET(r, 7, 0);
 
 	r = dsi_read_reg(dsidev, DSI_DSIPHY_CFG1);
-	tlpx = FLD_GET(r, 22, 16) * 2;
+	tlpx = FLD_GET(r, 20, 16) * 2;
 	tclk_trail = FLD_GET(r, 15, 8);
 	tclk_zero = FLD_GET(r, 7, 0);
 
-- 
cgit v1.2.1


From 9e7e9372225a5d70256beb13fbf3b077a437e5be Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Tue, 14 Aug 2012 12:29:22 +0530
Subject: OMAPDSS: DSI: Pass dsi platform device wherever possible

Many of the DSI functions receive the connected panel's omap_dss_device pointer
as an argument. The platform device pointer is then derived via omap_dss_device
pointers.

Most of these functions don't really require omap_dss_device pointer anymore
since we now keep copies of parameters in the driver data which were previously
available only via omap_dss_device. Replace the arguments with platform device
pointers for such functions.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dsi.c | 89 +++++++++++++++++++------------------------
 1 file changed, 39 insertions(+), 50 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index abe335abca53..5c82c918d2e3 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -2163,9 +2163,8 @@ static unsigned dsi_get_line_buf_size(struct platform_device *dsidev)
 	}
 }
 
-static int dsi_set_lane_config(struct omap_dss_device *dssdev)
+static int dsi_set_lane_config(struct platform_device *dsidev)
 {
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	static const u8 offsets[] = { 0, 4, 8, 12, 16 };
 	static const enum dsi_lane_function functions[] = {
@@ -2307,10 +2306,9 @@ static void dsi_cio_timings(struct platform_device *dsidev)
 }
 
 /* lane masks have lane 0 at lsb. mask_p for positive lines, n for negative */
-static void dsi_cio_enable_lane_override(struct omap_dss_device *dssdev,
+static void dsi_cio_enable_lane_override(struct platform_device *dsidev,
 		unsigned mask_p, unsigned mask_n)
 {
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	int i;
 	u32 l;
@@ -2357,9 +2355,8 @@ static void dsi_cio_disable_lane_override(struct platform_device *dsidev)
 	REG_FLD_MOD(dsidev, DSI_DSIPHY_CFG10, 0, 22, 17);
 }
 
-static int dsi_cio_wait_tx_clk_esc_reset(struct omap_dss_device *dssdev)
+static int dsi_cio_wait_tx_clk_esc_reset(struct platform_device *dsidev)
 {
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	int t, i;
 	bool in_use[DSI_MAX_NR_LANES];
@@ -2407,9 +2404,8 @@ static int dsi_cio_wait_tx_clk_esc_reset(struct omap_dss_device *dssdev)
 }
 
 /* return bitmask of enabled lanes, lane0 being the lsb */
-static unsigned dsi_get_lane_mask(struct omap_dss_device *dssdev)
+static unsigned dsi_get_lane_mask(struct platform_device *dsidev)
 {
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	unsigned mask = 0;
 	int i;
@@ -2422,16 +2418,15 @@ static unsigned dsi_get_lane_mask(struct omap_dss_device *dssdev)
 	return mask;
 }
 
-static int dsi_cio_init(struct omap_dss_device *dssdev)
+static int dsi_cio_init(struct platform_device *dsidev)
 {
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	int r;
 	u32 l;
 
 	DSSDBGF();
 
-	r = dss_dsi_enable_pads(dsi->module_id, dsi_get_lane_mask(dssdev));
+	r = dss_dsi_enable_pads(dsi->module_id, dsi_get_lane_mask(dsidev));
 	if (r)
 		return r;
 
@@ -2448,7 +2443,7 @@ static int dsi_cio_init(struct omap_dss_device *dssdev)
 		goto err_scp_clk_dom;
 	}
 
-	r = dsi_set_lane_config(dssdev);
+	r = dsi_set_lane_config(dsidev);
 	if (r)
 		goto err_scp_clk_dom;
 
@@ -2483,7 +2478,7 @@ static int dsi_cio_init(struct omap_dss_device *dssdev)
 			mask_p |= 1 << i;
 		}
 
-		dsi_cio_enable_lane_override(dssdev, mask_p, 0);
+		dsi_cio_enable_lane_override(dsidev, mask_p, 0);
 	}
 
 	r = dsi_cio_power(dsidev, DSI_COMPLEXIO_POWER_ON);
@@ -2500,7 +2495,7 @@ static int dsi_cio_init(struct omap_dss_device *dssdev)
 	dsi_if_enable(dsidev, false);
 	REG_FLD_MOD(dsidev, DSI_CLK_CTRL, 1, 20, 20); /* LP_CLK_ENABLE */
 
-	r = dsi_cio_wait_tx_clk_esc_reset(dssdev);
+	r = dsi_cio_wait_tx_clk_esc_reset(dsidev);
 	if (r)
 		goto err_tx_clk_esc_rst;
 
@@ -2541,13 +2536,12 @@ err_cio_pwr:
 		dsi_cio_disable_lane_override(dsidev);
 err_scp_clk_dom:
 	dsi_disable_scp_clk(dsidev);
-	dss_dsi_disable_pads(dsi->module_id, dsi_get_lane_mask(dssdev));
+	dss_dsi_disable_pads(dsi->module_id, dsi_get_lane_mask(dsidev));
 	return r;
 }
 
-static void dsi_cio_uninit(struct omap_dss_device *dssdev)
+static void dsi_cio_uninit(struct platform_device *dsidev)
 {
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 
 	/* DDR_CLK_ALWAYS_ON */
@@ -2555,7 +2549,7 @@ static void dsi_cio_uninit(struct omap_dss_device *dssdev)
 
 	dsi_cio_power(dsidev, DSI_COMPLEXIO_POWER_OFF);
 	dsi_disable_scp_clk(dsidev);
-	dss_dsi_disable_pads(dsi->module_id, dsi_get_lane_mask(dssdev));
+	dss_dsi_disable_pads(dsi->module_id, dsi_get_lane_mask(dsidev));
 }
 
 static void dsi_config_tx_fifo(struct platform_device *dsidev,
@@ -3148,10 +3142,9 @@ int dsi_vc_send_null(struct omap_dss_device *dssdev, int channel)
 }
 EXPORT_SYMBOL(dsi_vc_send_null);
 
-static int dsi_vc_write_nosync_common(struct omap_dss_device *dssdev,
+static int dsi_vc_write_nosync_common(struct platform_device *dsidev,
 		int channel, u8 *data, int len, enum dss_dsi_content_type type)
 {
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	int r;
 
 	if (len == 0) {
@@ -3182,7 +3175,9 @@ static int dsi_vc_write_nosync_common(struct omap_dss_device *dssdev,
 int dsi_vc_dcs_write_nosync(struct omap_dss_device *dssdev, int channel,
 		u8 *data, int len)
 {
-	return dsi_vc_write_nosync_common(dssdev, channel, data, len,
+	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+
+	return dsi_vc_write_nosync_common(dsidev, channel, data, len,
 			DSS_DSI_CONTENT_DCS);
 }
 EXPORT_SYMBOL(dsi_vc_dcs_write_nosync);
@@ -3190,7 +3185,9 @@ EXPORT_SYMBOL(dsi_vc_dcs_write_nosync);
 int dsi_vc_generic_write_nosync(struct omap_dss_device *dssdev, int channel,
 		u8 *data, int len)
 {
-	return dsi_vc_write_nosync_common(dssdev, channel, data, len,
+	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+
+	return dsi_vc_write_nosync_common(dsidev, channel, data, len,
 			DSS_DSI_CONTENT_GENERIC);
 }
 EXPORT_SYMBOL(dsi_vc_generic_write_nosync);
@@ -3201,7 +3198,7 @@ static int dsi_vc_write_common(struct omap_dss_device *dssdev, int channel,
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	int r;
 
-	r = dsi_vc_write_nosync_common(dssdev, channel, data, len, type);
+	r = dsi_vc_write_nosync_common(dsidev, channel, data, len, type);
 	if (r)
 		goto err;
 
@@ -3279,10 +3276,9 @@ int dsi_vc_generic_write_2(struct omap_dss_device *dssdev, int channel,
 }
 EXPORT_SYMBOL(dsi_vc_generic_write_2);
 
-static int dsi_vc_dcs_send_read_request(struct omap_dss_device *dssdev,
+static int dsi_vc_dcs_send_read_request(struct platform_device *dsidev,
 		int channel, u8 dcs_cmd)
 {
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	int r;
 
@@ -3300,10 +3296,9 @@ static int dsi_vc_dcs_send_read_request(struct omap_dss_device *dssdev,
 	return 0;
 }
 
-static int dsi_vc_generic_send_read_request(struct omap_dss_device *dssdev,
+static int dsi_vc_generic_send_read_request(struct platform_device *dsidev,
 		int channel, u8 *reqdata, int reqlen)
 {
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	u16 data;
 	u8 data_type;
@@ -3452,7 +3447,7 @@ int dsi_vc_dcs_read(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	int r;
 
-	r = dsi_vc_dcs_send_read_request(dssdev, channel, dcs_cmd);
+	r = dsi_vc_dcs_send_read_request(dsidev, channel, dcs_cmd);
 	if (r)
 		goto err;
 
@@ -3483,7 +3478,7 @@ static int dsi_vc_generic_read(struct omap_dss_device *dssdev, int channel,
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	int r;
 
-	r = dsi_vc_generic_send_read_request(dssdev, channel, reqdata, reqlen);
+	r = dsi_vc_generic_send_read_request(dsidev, channel, reqdata, reqlen);
 	if (r)
 		return r;
 
@@ -3765,14 +3760,12 @@ static void dsi_set_hs_tx_timeout(struct platform_device *dsidev,
 			(total_ticks * 1000) / (fck / 1000 / 1000));
 }
 
-static void dsi_config_vp_num_line_buffers(struct omap_dss_device *dssdev)
+static void dsi_config_vp_num_line_buffers(struct platform_device *dsidev)
 {
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	int num_line_buffers;
 
 	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
-		struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 		int bpp = dsi_get_pixel_size(dsi->pix_fmt);
 		unsigned line_buf_size = dsi_get_line_buf_size(dsidev);
 		struct omap_video_timings *timings = &dsi->timings;
@@ -3793,9 +3786,8 @@ static void dsi_config_vp_num_line_buffers(struct omap_dss_device *dssdev)
 	REG_FLD_MOD(dsidev, DSI_CTRL, num_line_buffers, 13, 12);
 }
 
-static void dsi_config_vp_sync_events(struct omap_dss_device *dssdev)
+static void dsi_config_vp_sync_events(struct platform_device *dsidev)
 {
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	bool vsync_end = dsi->vm_timings.vp_vsync_end;
 	bool hsync_end = dsi->vm_timings.vp_hsync_end;
@@ -3812,9 +3804,8 @@ static void dsi_config_vp_sync_events(struct omap_dss_device *dssdev)
 	dsi_write_reg(dsidev, DSI_CTRL, r);
 }
 
-static void dsi_config_blanking_modes(struct omap_dss_device *dssdev)
+static void dsi_config_blanking_modes(struct platform_device *dsidev)
 {
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	int blanking_mode = dsi->vm_timings.blanking_mode;
 	int hfp_blanking_mode = dsi->vm_timings.hfp_blanking_mode;
@@ -4069,11 +4060,11 @@ static int dsi_proto_config(struct omap_dss_device *dssdev)
 
 	dsi_write_reg(dsidev, DSI_CTRL, r);
 
-	dsi_config_vp_num_line_buffers(dssdev);
+	dsi_config_vp_num_line_buffers(dsidev);
 
 	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
-		dsi_config_vp_sync_events(dssdev);
-		dsi_config_blanking_modes(dssdev);
+		dsi_config_vp_sync_events(dsidev);
+		dsi_config_blanking_modes(dsidev);
 		dsi_config_cmd_mode_interleaving(dssdev);
 	}
 
@@ -4085,9 +4076,8 @@ static int dsi_proto_config(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static void dsi_proto_timings(struct omap_dss_device *dssdev)
+static void dsi_proto_timings(struct platform_device *dsidev)
 {
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 	unsigned tlpx, tclk_zero, tclk_prepare, tclk_trail;
 	unsigned tclk_pre, tclk_post;
@@ -4534,8 +4524,7 @@ static void dsi_framedone_timeout_work_callback(struct work_struct *work)
 
 static void dsi_framedone_irq_callback(void *data, u32 mask)
 {
-	struct omap_dss_device *dssdev = (struct omap_dss_device *) data;
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct platform_device *dsidev = (struct platform_device *) data;
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 
 	/* Note: We get FRAMEDONE when DISPC has finished sending pixels and
@@ -4619,7 +4608,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 		irq = dispc_mgr_get_framedone_irq(dssdev->manager->id);
 
 		r = omap_dispc_register_isr(dsi_framedone_irq_callback,
-			(void *) dssdev, irq);
+			(void *) dsidev, irq);
 		if (r) {
 			DSSERR("can't get FRAMEDONE irq\n");
 			goto err;
@@ -4660,7 +4649,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 err1:
 	if (dsi->mode == OMAP_DSS_DSI_CMD_MODE)
 		omap_dispc_unregister_isr(dsi_framedone_irq_callback,
-			(void *) dssdev, irq);
+			(void *) dsidev, irq);
 err:
 	return r;
 }
@@ -4676,7 +4665,7 @@ static void dsi_display_uninit_dispc(struct omap_dss_device *dssdev)
 		irq = dispc_mgr_get_framedone_irq(dssdev->manager->id);
 
 		omap_dispc_unregister_isr(dsi_framedone_irq_callback,
-			(void *) dssdev, irq);
+			(void *) dsidev, irq);
 	}
 }
 
@@ -4726,13 +4715,13 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
 
 	DSSDBG("PLL OK\n");
 
-	r = dsi_cio_init(dssdev);
+	r = dsi_cio_init(dsidev);
 	if (r)
 		goto err2;
 
 	_dsi_print_reset_status(dsidev);
 
-	dsi_proto_timings(dssdev);
+	dsi_proto_timings(dsidev);
 	dsi_set_lp_clk_divisor(dssdev);
 
 	if (1)
@@ -4752,7 +4741,7 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
 
 	return 0;
 err3:
-	dsi_cio_uninit(dssdev);
+	dsi_cio_uninit(dsidev);
 err2:
 	dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
 	dss_select_dsi_clk_source(dsi->module_id, OMAP_DSS_CLK_SRC_FCK);
@@ -4783,7 +4772,7 @@ static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev,
 	dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
 	dss_select_dsi_clk_source(dsi->module_id, OMAP_DSS_CLK_SRC_FCK);
 	dss_select_lcd_clk_source(dssdev->manager->id, OMAP_DSS_CLK_SRC_FCK);
-	dsi_cio_uninit(dssdev);
+	dsi_cio_uninit(dsidev);
 	dsi_pll_uninit(dsidev, disconnect_lanes);
 }
 
-- 
cgit v1.2.1


From fc22a84339d387203cc2a1685fb251a5ad4c9b43 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Tue, 26 Jun 2012 15:36:55 +0530
Subject: OMAPDSS: APPLY: Remove omap_dss_device references in wait_for_go
 functions

The functions dss_mgr_wait_for_go() and dss_mgr_wait_for_go_ovl() check if there
is an enabled display connected to the manager before trying to see the state of
the GO bit.

The checks related to the display can be replaced by checking the state of the
manager, i.e, whether the manager is enabled or not. This makes more sense than
checking with the connected display as the GO bit behaviour is more connected
with the manager state rather than the display state. A GO bit can only be set
if the manager is enabled. If a manager isn't enabled, we can safely assume that
the GO bit is not set.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/apply.c | 36 +++++++++++++++++++++++++-----------
 1 file changed, 25 insertions(+), 11 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 6354bb842856..72f3468b0790 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -421,17 +421,25 @@ static void wait_pending_extra_info_updates(void)
 int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
 {
 	unsigned long timeout = msecs_to_jiffies(500);
-	struct mgr_priv_data *mp;
+	struct mgr_priv_data *mp = get_mgr_priv(mgr);
 	u32 irq;
+	unsigned long flags;
 	int r;
 	int i;
-	struct omap_dss_device *dssdev = mgr->device;
 
-	if (!dssdev || dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+	spin_lock_irqsave(&data_lock, flags);
+
+	if (mgr_manual_update(mgr)) {
+		spin_unlock_irqrestore(&data_lock, flags);
 		return 0;
+	}
 
-	if (mgr_manual_update(mgr))
+	if (!mp->enabled) {
+		spin_unlock_irqrestore(&data_lock, flags);
 		return 0;
+	}
+
+	spin_unlock_irqrestore(&data_lock, flags);
 
 	r = dispc_runtime_get();
 	if (r)
@@ -439,10 +447,8 @@ int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
 
 	irq = dispc_mgr_get_vsync_irq(mgr->id);
 
-	mp = get_mgr_priv(mgr);
 	i = 0;
 	while (1) {
-		unsigned long flags;
 		bool shadow_dirty, dirty;
 
 		spin_lock_irqsave(&data_lock, flags);
@@ -486,21 +492,30 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
 {
 	unsigned long timeout = msecs_to_jiffies(500);
 	struct ovl_priv_data *op;
-	struct omap_dss_device *dssdev;
+	struct mgr_priv_data *mp;
 	u32 irq;
+	unsigned long flags;
 	int r;
 	int i;
 
 	if (!ovl->manager)
 		return 0;
 
-	dssdev = ovl->manager->device;
+	mp = get_mgr_priv(ovl->manager);
+
+	spin_lock_irqsave(&data_lock, flags);
 
-	if (!dssdev || dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+	if (ovl_manual_update(ovl)) {
+		spin_unlock_irqrestore(&data_lock, flags);
 		return 0;
+	}
 
-	if (ovl_manual_update(ovl))
+	if (!mp->enabled) {
+		spin_unlock_irqrestore(&data_lock, flags);
 		return 0;
+	}
+
+	spin_unlock_irqrestore(&data_lock, flags);
 
 	r = dispc_runtime_get();
 	if (r)
@@ -511,7 +526,6 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
 	op = get_ovl_priv(ovl);
 	i = 0;
 	while (1) {
-		unsigned long flags;
 		bool shadow_dirty, dirty;
 
 		spin_lock_irqsave(&data_lock, flags);
-- 
cgit v1.2.1


From 484dc404d233696ef65a8e676f9d4fe563b091ee Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 7 Sep 2012 17:38:00 +0530
Subject: OMAPDSS: outputs: Create a new entity called outputs

The current OMAPDSS design contains 3 software entities: Overlays, Managers and
Devices. These map to pipelines, overlay managers and the panels respectively in
hardware. One or more overlays connect to a manager to represent a composition,
the manager connects to a device(generally a display) to display the content.

The part of DSS hardware which isn't represented by any of the above entities
are interfaces/outputs that connect to an overlay manager, i.e blocks like DSI,
HDMI, VENC and so on. Currently, an overlay manager directly connects to the
display, and the output to which it is actually connected is ignored. The panel
driver of the display is responsible of calling output specific functions to
configure the output.

Adding outputs as a new software entity gives us the following benefits:

- Have exact information on the possible connections between managers and
  outputs: A manager can't connect to each and every output, there only limited
  hardware links between a manager's video port and some of the outputs.

- Remove hacks related to connecting managers and devices: Currently, default
  links between managers and devices are set in a not so clean way. Matching is
  done via comparing the device type, and the display types supported by the
  manager. This isn't sufficient to establish all the possible links between
  managers, outputs and devices in hardware.

- Make panel drivers more generic: The DSS panel drivers currently call
  interface/output specific functions to configure the hardware IP. When making
  these calls, the driver isn't actually aware of the underlying output. The
  output driver extracts information from the panel's omap_dss_device pointer
  to figure out which interface it is connected to, and then configures the
  corresponding output block. An example of this is when a DSI panel calls
  dsi functions, the dsi driver figures out whether the panel is connected
  to DSI1 or DSI2. This isn't correct, and having output as entities will
  give the panel driver the exact information on which output to configure.
  Having outputs also gives the opportunity to make panel drivers generic
  across different platforms/SoCs, this is achieved as omap specific output
  calls can be replaced by ops of a particular output type.

- Have more complex connections between managers, outputs and devices: OMAPDSS
  currently doesn't support use cases like 2 outputs connect to a single
  device. This can be achieved by extending properties of outputs to connect to
  more managers or devices.

- Represent writeback as an output: The writeback pipeline fits well in OMAPDSS
  as compared to overlays, managers or devices.

Add a new struct to represent outputs. An output struct holds pointers to the
manager and device structs to which it is connected. Add functions which can
register/unregister an output, or look for one. Create an enum which represent
each output instance.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/Makefile |  2 +-
 drivers/video/omap2/dss/dss.h    |  4 ++++
 drivers/video/omap2/dss/output.c | 48 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 53 insertions(+), 1 deletion(-)
 create mode 100644 drivers/video/omap2/dss/output.c

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile
index 00a6eb566bb6..4549869bfe1a 100644
--- a/drivers/video/omap2/dss/Makefile
+++ b/drivers/video/omap2/dss/Makefile
@@ -1,6 +1,6 @@
 obj-$(CONFIG_OMAP2_DSS) += omapdss.o
 omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
-	manager.o manager-sysfs.o overlay.o overlay-sysfs.o apply.o
+	manager.o manager-sysfs.o overlay.o overlay-sysfs.o output.o apply.o
 omapdss-$(CONFIG_OMAP2_DSS_DPI) += dpi.o
 omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o
 omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o venc_panel.o
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 40c36cafec6e..aecd3bea2e63 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -226,6 +226,10 @@ int dss_ovl_set_manager(struct omap_overlay *ovl,
 		struct omap_overlay_manager *mgr);
 int dss_ovl_unset_manager(struct omap_overlay *ovl);
 
+/* output */
+void dss_register_output(struct omap_dss_output *out);
+void dss_unregister_output(struct omap_dss_output *out);
+
 /* display */
 int dss_suspend_all_devices(void);
 int dss_resume_all_devices(void);
diff --git a/drivers/video/omap2/dss/output.c b/drivers/video/omap2/dss/output.c
new file mode 100644
index 000000000000..388a6c997b9c
--- /dev/null
+++ b/drivers/video/omap2/dss/output.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Ltd
+ * Author: Archit Taneja <archit@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <video/omapdss.h>
+
+#include "dss.h"
+
+static LIST_HEAD(output_list);
+
+void dss_register_output(struct omap_dss_output *out)
+{
+	list_add_tail(&out->list, &output_list);
+}
+
+void dss_unregister_output(struct omap_dss_output *out)
+{
+	list_del(&out->list);
+}
+
+struct omap_dss_output *omap_dss_get_output(enum omap_dss_output_id id)
+{
+	struct omap_dss_output *out;
+
+	list_for_each_entry(out, &output_list, list) {
+		if (out->id == id)
+			return out;
+	}
+
+	return NULL;
+}
-- 
cgit v1.2.1


From 81b87f515f6abbbe4eef42835065db9d0831ef35 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Wed, 26 Sep 2012 16:30:49 +0530
Subject: OMAPDSS: outputs: Create and register output instances

Add output structs to output driver's private data. Register output instances by
having an init function in the probes of the platform device drivers for
different outputs. The *_init_output for each output registers the output and
fill up the output's plaform device, type and id fields. The *_uninit_output
functions unregister the output.

In the probe of each interface driver, the output entities are initialized
before the *_probe_pdata() functions intentionally. This is done to ensure that
the output entity is prepared before the panels connected to the output are
registered. We need the output entities to be ready because OMAPDSS will try
to make connections between overlays, managers, outputs and devices during the
panel's probe.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dpi.c  | 24 ++++++++++++++++++++++++
 drivers/video/omap2/dss/dsi.c  | 28 ++++++++++++++++++++++++++++
 drivers/video/omap2/dss/hdmi.c | 24 ++++++++++++++++++++++++
 drivers/video/omap2/dss/rfbi.c | 26 ++++++++++++++++++++++++++
 drivers/video/omap2/dss/sdi.c  | 24 ++++++++++++++++++++++++
 drivers/video/omap2/dss/venc.c | 24 ++++++++++++++++++++++++
 6 files changed, 150 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index f6800e19bbcb..ee1fa1e1a015 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -44,6 +44,8 @@ static struct {
 	struct omap_video_timings timings;
 	struct dss_lcd_mgr_config mgr_config;
 	int data_lines;
+
+	struct omap_dss_output output;
 } dpi;
 
 static struct platform_device *dpi_get_dsidev(enum omap_dss_clk_source clk)
@@ -436,10 +438,30 @@ static void __init dpi_probe_pdata(struct platform_device *dpidev)
 	}
 }
 
+static void __init dpi_init_output(struct platform_device *pdev)
+{
+	struct omap_dss_output *out = &dpi.output;
+
+	out->pdev = pdev;
+	out->id = OMAP_DSS_OUTPUT_DPI;
+	out->type = OMAP_DISPLAY_TYPE_DPI;
+
+	dss_register_output(out);
+}
+
+static void __exit dpi_uninit_output(struct platform_device *pdev)
+{
+	struct omap_dss_output *out = &dpi.output;
+
+	dss_unregister_output(out);
+}
+
 static int __init omap_dpi_probe(struct platform_device *pdev)
 {
 	mutex_init(&dpi.lock);
 
+	dpi_init_output(pdev);
+
 	dpi_probe_pdata(pdev);
 
 	return 0;
@@ -449,6 +471,8 @@ static int __exit omap_dpi_remove(struct platform_device *pdev)
 {
 	dss_unregister_child_devices(&pdev->dev);
 
+	dpi_uninit_output(pdev);
+
 	return 0;
 }
 
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 5c82c918d2e3..55748bc081e8 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -336,6 +336,8 @@ struct dsi_data {
 	enum omap_dss_dsi_pixel_format pix_fmt;
 	enum omap_dss_dsi_mode mode;
 	struct omap_dss_dsi_videomode_timings vm_timings;
+
+	struct omap_dss_output output;
 };
 
 struct dsi_packet_sent_handler_data {
@@ -5156,6 +5158,28 @@ static void __init dsi_probe_pdata(struct platform_device *dsidev)
 	}
 }
 
+static void __init dsi_init_output(struct platform_device *dsidev)
+{
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	struct omap_dss_output *out = &dsi->output;
+
+	out->pdev = dsidev;
+	out->id = dsi->module_id == 0 ?
+			OMAP_DSS_OUTPUT_DSI1 : OMAP_DSS_OUTPUT_DSI2;
+
+	out->type = OMAP_DISPLAY_TYPE_DSI;
+
+	dss_register_output(out);
+}
+
+static void __exit dsi_uninit_output(struct platform_device *dsidev)
+{
+	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	struct omap_dss_output *out = &dsi->output;
+
+	dss_unregister_output(out);
+}
+
 /* DSI1 HW IP initialisation */
 static int __init omap_dsihw_probe(struct platform_device *dsidev)
 {
@@ -5250,6 +5274,8 @@ static int __init omap_dsihw_probe(struct platform_device *dsidev)
 	else
 		dsi->num_lanes_supported = 3;
 
+	dsi_init_output(dsidev);
+
 	dsi_probe_pdata(dsidev);
 
 	dsi_runtime_put(dsidev);
@@ -5281,6 +5307,8 @@ static int __exit omap_dsihw_remove(struct platform_device *dsidev)
 
 	dss_unregister_child_devices(&dsidev->dev);
 
+	dsi_uninit_output(dsidev);
+
 	pm_runtime_disable(&dsidev->dev);
 
 	dsi_put_clocks(dsidev);
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 23daf7dcf54a..294bf9879434 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -68,6 +68,8 @@ static struct {
 	int ct_cp_hpd_gpio;
 	int ls_oe_gpio;
 	int hpd_gpio;
+
+	struct omap_dss_output output;
 } hdmi;
 
 /*
@@ -970,6 +972,24 @@ static void __init hdmi_probe_pdata(struct platform_device *pdev)
 	}
 }
 
+static void __init hdmi_init_output(struct platform_device *pdev)
+{
+	struct omap_dss_output *out = &hdmi.output;
+
+	out->pdev = pdev;
+	out->id = OMAP_DSS_OUTPUT_HDMI;
+	out->type = OMAP_DISPLAY_TYPE_HDMI;
+
+	dss_register_output(out);
+}
+
+static void __exit hdmi_uninit_output(struct platform_device *pdev)
+{
+	struct omap_dss_output *out = &hdmi.output;
+
+	dss_unregister_output(out);
+}
+
 /* HDMI HW IP initialisation */
 static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
 {
@@ -1013,6 +1033,8 @@ static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
 
 	dss_debugfs_create_file("hdmi", hdmi_dump_regs);
 
+	hdmi_init_output(pdev);
+
 	hdmi_probe_pdata(pdev);
 
 	return 0;
@@ -1033,6 +1055,8 @@ static int __exit omapdss_hdmihw_remove(struct platform_device *pdev)
 
 	hdmi_panel_exit();
 
+	hdmi_uninit_output(pdev);
+
 	pm_runtime_disable(&pdev->dev);
 
 	hdmi_put_clocks();
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 38d9b8ecbe3c..58e51722fccf 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -116,6 +116,8 @@ static struct {
 	int pixel_size;
 	int data_lines;
 	struct rfbi_timings intf_timings;
+
+	struct omap_dss_output output;
 } rfbi;
 
 static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val)
@@ -1002,6 +1004,24 @@ static void __init rfbi_probe_pdata(struct platform_device *rfbidev)
 	}
 }
 
+static void __init rfbi_init_output(struct platform_device *pdev)
+{
+	struct omap_dss_output *out = &rfbi.output;
+
+	out->pdev = pdev;
+	out->id = OMAP_DSS_OUTPUT_DBI;
+	out->type = OMAP_DISPLAY_TYPE_DBI;
+
+	dss_register_output(out);
+}
+
+static void __exit rfbi_uninit_output(struct platform_device *pdev)
+{
+	struct omap_dss_output *out = &rfbi.output;
+
+	dss_unregister_output(out);
+}
+
 /* RFBI HW IP initialisation */
 static int __init omap_rfbihw_probe(struct platform_device *pdev)
 {
@@ -1053,6 +1073,8 @@ static int __init omap_rfbihw_probe(struct platform_device *pdev)
 
 	dss_debugfs_create_file("rfbi", rfbi_dump_regs);
 
+	rfbi_init_output(pdev);
+
 	rfbi_probe_pdata(pdev);
 
 	return 0;
@@ -1065,7 +1087,11 @@ err_runtime_get:
 static int __exit omap_rfbihw_remove(struct platform_device *pdev)
 {
 	dss_unregister_child_devices(&pdev->dev);
+
+	rfbi_uninit_output(pdev);
+
 	pm_runtime_disable(&pdev->dev);
+
 	return 0;
 }
 
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 919ff728c502..47f9fe4e1741 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -36,6 +36,8 @@ static struct {
 	struct dss_lcd_mgr_config mgr_config;
 	struct omap_video_timings timings;
 	int datapairs;
+
+	struct omap_dss_output output;
 } sdi;
 
 static void sdi_config_lcd_manager(struct omap_dss_device *dssdev)
@@ -255,8 +257,28 @@ static void __init sdi_probe_pdata(struct platform_device *sdidev)
 	}
 }
 
+static void __init sdi_init_output(struct platform_device *pdev)
+{
+	struct omap_dss_output *out = &sdi.output;
+
+	out->pdev = pdev;
+	out->id = OMAP_DSS_OUTPUT_SDI;
+	out->type = OMAP_DISPLAY_TYPE_SDI;
+
+	dss_register_output(out);
+}
+
+static void __exit sdi_uninit_output(struct platform_device *pdev)
+{
+	struct omap_dss_output *out = &sdi.output;
+
+	dss_unregister_output(out);
+}
+
 static int __init omap_sdi_probe(struct platform_device *pdev)
 {
+	sdi_init_output(pdev);
+
 	sdi_probe_pdata(pdev);
 
 	return 0;
@@ -266,6 +288,8 @@ static int __exit omap_sdi_remove(struct platform_device *pdev)
 {
 	dss_unregister_child_devices(&pdev->dev);
 
+	sdi_uninit_output(pdev);
+
 	return 0;
 }
 
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 996779c0204c..24d278b3e7fd 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -303,6 +303,8 @@ static struct {
 	struct omap_video_timings timings;
 	enum omap_dss_venc_type type;
 	bool invert_polarity;
+
+	struct omap_dss_output output;
 } venc;
 
 static inline void venc_write_reg(int idx, u32 val)
@@ -797,6 +799,24 @@ static void __init venc_probe_pdata(struct platform_device *vencdev)
 	}
 }
 
+static void __init venc_init_output(struct platform_device *pdev)
+{
+	struct omap_dss_output *out = &venc.output;
+
+	out->pdev = pdev;
+	out->id = OMAP_DSS_OUTPUT_VENC;
+	out->type = OMAP_DISPLAY_TYPE_VENC;
+
+	dss_register_output(out);
+}
+
+static void __exit venc_uninit_output(struct platform_device *pdev)
+{
+	struct omap_dss_output *out = &venc.output;
+
+	dss_unregister_output(out);
+}
+
 /* VENC HW IP initialisation */
 static int __init omap_venchw_probe(struct platform_device *pdev)
 {
@@ -844,6 +864,8 @@ static int __init omap_venchw_probe(struct platform_device *pdev)
 
 	dss_debugfs_create_file("venc", venc_dump_regs);
 
+	venc_init_output(pdev);
+
 	venc_probe_pdata(pdev);
 
 	return 0;
@@ -866,6 +888,8 @@ static int __exit omap_venchw_remove(struct platform_device *pdev)
 
 	venc_panel_exit();
 
+	venc_uninit_output(pdev);
+
 	pm_runtime_disable(&pdev->dev);
 	venc_put_clocks();
 
-- 
cgit v1.2.1


From 6d71b923e53184808b0206ebd74159c41a2dcf38 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Wed, 29 Aug 2012 13:30:15 +0530
Subject: OMAPDSS: output: Add set/unset device ops for omap_dss_output

An output entity represented by the struct omap_dss_output connects to a
omap_dss_device entity. Add functions to set or unset an output's device. This
is similar to how managers and devices were connected previously. An output can
connect to a device without being connected to a manager. However, the output
needs to eventually connect to a manager so that the connected panel can be
enabled.

Keep the omap_overlay_manager pointer in omap_dss_device for now to prevent
breaking things. This will be removed later when outputs are supported
completely.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/output.c | 67 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/output.c b/drivers/video/omap2/dss/output.c
index 388a6c997b9c..1a84b79d5580 100644
--- a/drivers/video/omap2/dss/output.c
+++ b/drivers/video/omap2/dss/output.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
@@ -24,6 +25,72 @@
 #include "dss.h"
 
 static LIST_HEAD(output_list);
+static DEFINE_MUTEX(output_lock);
+
+int omapdss_output_set_device(struct omap_dss_output *out,
+		struct omap_dss_device *dssdev)
+{
+	int r;
+
+	mutex_lock(&output_lock);
+
+	if (out->device) {
+		DSSERR("output already has device %s connected to it\n",
+			out->device->name);
+		r = -EINVAL;
+		goto err;
+	}
+
+	if (out->type != dssdev->type) {
+		DSSERR("output type and display type don't match\n");
+		r = -EINVAL;
+		goto err;
+	}
+
+	out->device = dssdev;
+	dssdev->output = out;
+
+	mutex_unlock(&output_lock);
+
+	return 0;
+err:
+	mutex_unlock(&output_lock);
+
+	return r;
+}
+EXPORT_SYMBOL(omapdss_output_set_device);
+
+int omapdss_output_unset_device(struct omap_dss_output *out)
+{
+	int r;
+
+	mutex_lock(&output_lock);
+
+	if (!out->device) {
+		DSSERR("output doesn't have a device connected to it\n");
+		r = -EINVAL;
+		goto err;
+	}
+
+	if (out->device->state != OMAP_DSS_DISPLAY_DISABLED) {
+		DSSERR("device %s is not disabled, cannot unset device\n",
+				out->device->name);
+		r = -EINVAL;
+		goto err;
+	}
+
+	out->device->output = NULL;
+	out->device = NULL;
+
+	mutex_unlock(&output_lock);
+
+	return 0;
+err:
+	mutex_unlock(&output_lock);
+
+	return r;
+}
+EXPORT_SYMBOL(omapdss_output_unset_device);
 
 void dss_register_output(struct omap_dss_output *out)
 {
-- 
cgit v1.2.1


From 97f01b3a2ed6d46132bf4e2d237c27846e7b260a Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Wed, 26 Sep 2012 16:42:39 +0530
Subject: OMAPDSS: APPLY: Add manager set/unset output ops for
 omap_overlay_manager

Add set_output/unset_output ops for overlay managers, these form links between
managers and outputs. Create a function in dss features which tell all the
output instances that connect to a manager, use it when a manager tries to set
an output. Add a constraint of not unsetting an output when the manager is
enabled.

Keep the omap_dss_device pointer and set/unset_device ops in overlay_manager for
now to not break things. Keep the dss feature function get_supported_displays
as it's used in some places. These will be removed later.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/apply.c        | 70 +++++++++++++++++++++++++++++++++
 drivers/video/omap2/dss/dss.h          |  3 ++
 drivers/video/omap2/dss/dss_features.c | 71 ++++++++++++++++++++++++++++++++++
 drivers/video/omap2/dss/dss_features.h |  1 +
 drivers/video/omap2/dss/manager.c      |  4 ++
 5 files changed, 149 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 72f3468b0790..3cc47265bb03 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -1174,6 +1174,76 @@ err:
 	return r;
 }
 
+int dss_mgr_set_output(struct omap_overlay_manager *mgr,
+		struct omap_dss_output *output)
+{
+	int r;
+
+	mutex_lock(&apply_lock);
+
+	if (mgr->output) {
+		DSSERR("manager %s is already connected to an output\n",
+			mgr->name);
+		r = -EINVAL;
+		goto err;
+	}
+
+	if ((mgr->supported_outputs & output->id) == 0) {
+		DSSERR("output does not support manager %s\n",
+			mgr->name);
+		r = -EINVAL;
+		goto err;
+	}
+
+	output->manager = mgr;
+	mgr->output = output;
+
+	mutex_unlock(&apply_lock);
+
+	return 0;
+err:
+	mutex_unlock(&apply_lock);
+	return r;
+}
+
+int dss_mgr_unset_output(struct omap_overlay_manager *mgr)
+{
+	int r;
+	struct mgr_priv_data *mp = get_mgr_priv(mgr);
+	unsigned long flags;
+
+	mutex_lock(&apply_lock);
+
+	if (!mgr->output) {
+		DSSERR("failed to unset output, output not set\n");
+		r = -EINVAL;
+		goto err;
+	}
+
+	spin_lock_irqsave(&data_lock, flags);
+
+	if (mp->enabled) {
+		DSSERR("output can't be unset when manager is enabled\n");
+		r = -EINVAL;
+		goto err1;
+	}
+
+	spin_unlock_irqrestore(&data_lock, flags);
+
+	mgr->output->manager = NULL;
+	mgr->output = NULL;
+
+	mutex_unlock(&apply_lock);
+
+	return 0;
+err1:
+	spin_unlock_irqrestore(&data_lock, flags);
+err:
+	mutex_unlock(&apply_lock);
+
+	return r;
+}
+
 static void dss_apply_mgr_timings(struct omap_overlay_manager *mgr,
 		const struct omap_video_timings *timings)
 {
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index aecd3bea2e63..b5c0df43547f 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -209,6 +209,9 @@ void dss_mgr_get_info(struct omap_overlay_manager *mgr,
 int dss_mgr_set_device(struct omap_overlay_manager *mgr,
 		struct omap_dss_device *dssdev);
 int dss_mgr_unset_device(struct omap_overlay_manager *mgr);
+int dss_mgr_set_output(struct omap_overlay_manager *mgr,
+		struct omap_dss_output *output);
+int dss_mgr_unset_output(struct omap_overlay_manager *mgr);
 void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
 		const struct omap_video_timings *timings);
 void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 406913949e2c..bfe7fc7b8593 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -47,6 +47,7 @@ struct omap_dss_features {
 	const int num_mgrs;
 	const int num_ovls;
 	const enum omap_display_type *supported_displays;
+	const enum omap_dss_output_id *supported_outputs;
 	const enum omap_color_mode *supported_color_modes;
 	const enum omap_overlay_caps *overlay_caps;
 	const char * const *clksrc_names;
@@ -172,6 +173,63 @@ static const enum omap_display_type omap5_dss_supported_displays[] = {
 	OMAP_DISPLAY_TYPE_DSI,
 };
 
+static const enum omap_dss_output_id omap2_dss_supported_outputs[] = {
+	/* OMAP_DSS_CHANNEL_LCD */
+	OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI,
+
+	/* OMAP_DSS_CHANNEL_DIGIT */
+	OMAP_DSS_OUTPUT_VENC,
+};
+
+static const enum omap_dss_output_id omap3430_dss_supported_outputs[] = {
+	/* OMAP_DSS_CHANNEL_LCD */
+	OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
+	OMAP_DSS_OUTPUT_SDI | OMAP_DSS_OUTPUT_DSI1,
+
+	/* OMAP_DSS_CHANNEL_DIGIT */
+	OMAP_DSS_OUTPUT_VENC,
+};
+
+static const enum omap_dss_output_id omap3630_dss_supported_outputs[] = {
+	/* OMAP_DSS_CHANNEL_LCD */
+	OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
+	OMAP_DSS_OUTPUT_DSI1,
+
+	/* OMAP_DSS_CHANNEL_DIGIT */
+	OMAP_DSS_OUTPUT_VENC,
+};
+
+static const enum omap_dss_output_id omap4_dss_supported_outputs[] = {
+	/* OMAP_DSS_CHANNEL_LCD */
+	OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
+	OMAP_DSS_OUTPUT_DSI1,
+
+	/* OMAP_DSS_CHANNEL_DIGIT */
+	OMAP_DSS_OUTPUT_VENC | OMAP_DSS_OUTPUT_HDMI |
+	OMAP_DSS_OUTPUT_DPI,
+
+	/* OMAP_DSS_CHANNEL_LCD2 */
+	OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
+	OMAP_DSS_OUTPUT_DSI2,
+};
+
+static const enum omap_dss_output_id omap5_dss_supported_outputs[] = {
+	/* OMAP_DSS_CHANNEL_LCD */
+	OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
+	OMAP_DSS_OUTPUT_DSI1 | OMAP_DSS_OUTPUT_DSI2,
+
+	/* OMAP_DSS_CHANNEL_DIGIT */
+	OMAP_DSS_OUTPUT_HDMI | OMAP_DSS_OUTPUT_DPI,
+
+	/* OMAP_DSS_CHANNEL_LCD2 */
+	OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
+	OMAP_DSS_OUTPUT_DSI1,
+
+	/* OMAP_DSS_CHANNEL_LCD3 */
+	OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
+	OMAP_DSS_OUTPUT_DSI2,
+};
+
 static const enum omap_color_mode omap2_dss_supported_color_modes[] = {
 	/* OMAP_DSS_GFX */
 	OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
@@ -554,6 +612,7 @@ static const struct omap_dss_features omap2_dss_features = {
 	.num_mgrs = 2,
 	.num_ovls = 3,
 	.supported_displays = omap2_dss_supported_displays,
+	.supported_outputs = omap2_dss_supported_outputs,
 	.supported_color_modes = omap2_dss_supported_color_modes,
 	.overlay_caps = omap2_dss_overlay_caps,
 	.clksrc_names = omap2_dss_clk_source_names,
@@ -574,6 +633,7 @@ static const struct omap_dss_features omap3430_dss_features = {
 	.num_mgrs = 2,
 	.num_ovls = 3,
 	.supported_displays = omap3430_dss_supported_displays,
+	.supported_outputs = omap3430_dss_supported_outputs,
 	.supported_color_modes = omap3_dss_supported_color_modes,
 	.overlay_caps = omap3430_dss_overlay_caps,
 	.clksrc_names = omap3_dss_clk_source_names,
@@ -597,6 +657,7 @@ static const struct omap_dss_features am35xx_dss_features = {
 	.num_mgrs = 2,
 	.num_ovls = 3,
 	.supported_displays = omap3430_dss_supported_displays,
+	.supported_outputs = omap3430_dss_supported_outputs,
 	.supported_color_modes = omap3_dss_supported_color_modes,
 	.overlay_caps = omap3430_dss_overlay_caps,
 	.clksrc_names = omap3_dss_clk_source_names,
@@ -616,6 +677,7 @@ static const struct omap_dss_features omap3630_dss_features = {
 	.num_mgrs = 2,
 	.num_ovls = 3,
 	.supported_displays = omap3630_dss_supported_displays,
+	.supported_outputs = omap3630_dss_supported_outputs,
 	.supported_color_modes = omap3_dss_supported_color_modes,
 	.overlay_caps = omap3630_dss_overlay_caps,
 	.clksrc_names = omap3_dss_clk_source_names,
@@ -637,6 +699,7 @@ static const struct omap_dss_features omap4430_es1_0_dss_features  = {
 	.num_mgrs = 3,
 	.num_ovls = 4,
 	.supported_displays = omap4_dss_supported_displays,
+	.supported_outputs = omap4_dss_supported_outputs,
 	.supported_color_modes = omap4_dss_supported_color_modes,
 	.overlay_caps = omap4_dss_overlay_caps,
 	.clksrc_names = omap4_dss_clk_source_names,
@@ -657,6 +720,7 @@ static const struct omap_dss_features omap4430_es2_0_1_2_dss_features = {
 	.num_mgrs = 3,
 	.num_ovls = 4,
 	.supported_displays = omap4_dss_supported_displays,
+	.supported_outputs = omap4_dss_supported_outputs,
 	.supported_color_modes = omap4_dss_supported_color_modes,
 	.overlay_caps = omap4_dss_overlay_caps,
 	.clksrc_names = omap4_dss_clk_source_names,
@@ -677,6 +741,7 @@ static const struct omap_dss_features omap4_dss_features = {
 	.num_mgrs = 3,
 	.num_ovls = 4,
 	.supported_displays = omap4_dss_supported_displays,
+	.supported_outputs = omap4_dss_supported_outputs,
 	.supported_color_modes = omap4_dss_supported_color_modes,
 	.overlay_caps = omap4_dss_overlay_caps,
 	.clksrc_names = omap4_dss_clk_source_names,
@@ -697,6 +762,7 @@ static const struct omap_dss_features omap5_dss_features = {
 	.num_mgrs = 3,
 	.num_ovls = 4,
 	.supported_displays = omap5_dss_supported_displays,
+	.supported_outputs = omap5_dss_supported_outputs,
 	.supported_color_modes = omap4_dss_supported_color_modes,
 	.overlay_caps = omap4_dss_overlay_caps,
 	.clksrc_names = omap5_dss_clk_source_names,
@@ -766,6 +832,11 @@ enum omap_display_type dss_feat_get_supported_displays(enum omap_channel channel
 	return omap_current_dss_features->supported_displays[channel];
 }
 
+enum omap_dss_output_id dss_feat_get_supported_outputs(enum omap_channel channel)
+{
+	return omap_current_dss_features->supported_outputs[channel];
+}
+
 enum omap_color_mode dss_feat_get_supported_color_modes(enum omap_plane plane)
 {
 	return omap_current_dss_features->supported_color_modes[plane];
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index aacad863fa22..89df2aa860d4 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -108,6 +108,7 @@ int dss_feat_get_num_ovls(void);
 unsigned long dss_feat_get_param_min(enum dss_range_param param);
 unsigned long dss_feat_get_param_max(enum dss_range_param param);
 enum omap_display_type dss_feat_get_supported_displays(enum omap_channel channel);
+enum omap_dss_output_id dss_feat_get_supported_outputs(enum omap_channel channel);
 enum omap_color_mode dss_feat_get_supported_color_modes(enum omap_plane plane);
 enum omap_overlay_caps dss_feat_get_overlay_caps(enum omap_plane plane);
 bool dss_feat_color_mode_supported(enum omap_plane plane,
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 383314f222b0..92a2585d04b2 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -95,6 +95,8 @@ int dss_init_overlay_managers(struct platform_device *pdev)
 
 		mgr->set_device = &dss_mgr_set_device;
 		mgr->unset_device = &dss_mgr_unset_device;
+		mgr->set_output = &dss_mgr_set_output;
+		mgr->unset_output = &dss_mgr_unset_output;
 		mgr->apply = &omap_dss_mgr_apply;
 		mgr->set_manager_info = &dss_mgr_set_info;
 		mgr->get_manager_info = &dss_mgr_get_info;
@@ -104,6 +106,8 @@ int dss_init_overlay_managers(struct platform_device *pdev)
 		mgr->caps = 0;
 		mgr->supported_displays =
 			dss_feat_get_supported_displays(mgr->id);
+		mgr->supported_outputs =
+			dss_feat_get_supported_outputs(mgr->id);
 
 		INIT_LIST_HEAD(&mgr->overlays);
 
-- 
cgit v1.2.1


From 794bc4eefa10fbc80e6ad29de1bc42424efde608 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 7 Sep 2012 17:44:51 +0530
Subject: OMAPDSS: Remove manager->device references

With the introduction of output entities, managers will now connect to outputs.
Create helper ops for overlays and managers named get_device. This will abstract
away the information on how to get the device from an overlay or an overlay
manager. The get_device ops currently retrieve the output via a
ovl->manager->device reference. This will be later replaced by
ovl->manager->output->device references.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/apply.c         |  4 ++--
 drivers/video/omap2/dss/dispc.c         | 10 +++++++---
 drivers/video/omap2/dss/manager-sysfs.c |  8 +++++---
 drivers/video/omap2/dss/manager.c       | 11 +++++++++--
 drivers/video/omap2/dss/overlay.c       |  6 ++++++
 5 files changed, 29 insertions(+), 10 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 3cc47265bb03..417b286132f5 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -1464,7 +1464,7 @@ int dss_ovl_enable(struct omap_overlay *ovl)
 		goto err1;
 	}
 
-	if (ovl->manager == NULL || ovl->manager->device == NULL) {
+	if (ovl->get_device(ovl) == NULL) {
 		r = -EINVAL;
 		goto err1;
 	}
@@ -1514,7 +1514,7 @@ int dss_ovl_disable(struct omap_overlay *ovl)
 		goto err;
 	}
 
-	if (ovl->manager == NULL || ovl->manager->device == NULL) {
+	if (ovl->get_device(ovl) == NULL) {
 		r = -EINVAL;
 		goto err;
 	}
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 2137d2a2cc5d..811fe381aaea 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3595,7 +3595,7 @@ static void dispc_error_worker(struct work_struct *work)
 		bit = mgr_desc[i].sync_lost_irq;
 
 		if (bit & errors) {
-			struct omap_dss_device *dssdev = mgr->device;
+			struct omap_dss_device *dssdev = mgr->get_device(mgr);
 			bool enable;
 
 			DSSERR("SYNC_LOST on channel %s, restarting the output "
@@ -3626,9 +3626,13 @@ static void dispc_error_worker(struct work_struct *work)
 		DSSERR("OCP_ERR\n");
 		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
 			struct omap_overlay_manager *mgr;
+			struct omap_dss_device *dssdev;
+
 			mgr = omap_dss_get_overlay_manager(i);
-			if (mgr->device && mgr->device->driver)
-				mgr->device->driver->disable(mgr->device);
+			dssdev = mgr->get_device(mgr);
+
+			if (dssdev && dssdev->driver)
+				dssdev->driver->disable(dssdev);
 		}
 	}
 
diff --git a/drivers/video/omap2/dss/manager-sysfs.c b/drivers/video/omap2/dss/manager-sysfs.c
index 9b875fbe757e..55cf955f663d 100644
--- a/drivers/video/omap2/dss/manager-sysfs.c
+++ b/drivers/video/omap2/dss/manager-sysfs.c
@@ -38,8 +38,10 @@ static ssize_t manager_name_show(struct omap_overlay_manager *mgr, char *buf)
 
 static ssize_t manager_display_show(struct omap_overlay_manager *mgr, char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "%s\n",
-			mgr->device ? mgr->device->name : "<none>");
+	struct omap_dss_device *dssdev = mgr->get_device(mgr);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", dssdev ?
+			dssdev->name : "<none>");
 }
 
 static ssize_t manager_display_store(struct omap_overlay_manager *mgr,
@@ -67,7 +69,7 @@ static ssize_t manager_display_store(struct omap_overlay_manager *mgr,
 	if (dssdev)
 		DSSDBG("display %s found\n", dssdev->name);
 
-	if (mgr->device) {
+	if (mgr->get_device(mgr)) {
 		r = mgr->unset_device(mgr);
 		if (r) {
 			DSSERR("failed to unset display\n");
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 92a2585d04b2..edc372e04bcb 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -36,9 +36,15 @@
 static int num_managers;
 static struct omap_overlay_manager *managers;
 
+static inline struct omap_dss_device *dss_mgr_get_device(struct omap_overlay_manager *mgr)
+{
+	return mgr->device;
+}
+
 static int dss_mgr_wait_for_vsync(struct omap_overlay_manager *mgr)
 {
 	unsigned long timeout = msecs_to_jiffies(500);
+	struct omap_dss_device *dssdev = mgr->get_device(mgr);
 	u32 irq;
 	int r;
 
@@ -46,9 +52,9 @@ static int dss_mgr_wait_for_vsync(struct omap_overlay_manager *mgr)
 	if (r)
 		return r;
 
-	if (mgr->device->type == OMAP_DISPLAY_TYPE_VENC)
+	if (dssdev->type == OMAP_DISPLAY_TYPE_VENC)
 		irq = DISPC_IRQ_EVSYNC_ODD;
-	else if (mgr->device->type == OMAP_DISPLAY_TYPE_HDMI)
+	else if (dssdev->type == OMAP_DISPLAY_TYPE_HDMI)
 		irq = DISPC_IRQ_EVSYNC_EVEN;
 	else
 		irq = dispc_mgr_get_vsync_irq(mgr->id);
@@ -102,6 +108,7 @@ int dss_init_overlay_managers(struct platform_device *pdev)
 		mgr->get_manager_info = &dss_mgr_get_info;
 		mgr->wait_for_go = &dss_mgr_wait_for_go;
 		mgr->wait_for_vsync = &dss_mgr_wait_for_vsync;
+		mgr->get_device = &dss_mgr_get_device;
 
 		mgr->caps = 0;
 		mgr->supported_displays =
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 52455a0609cb..0f799e2d91bb 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -38,6 +38,11 @@
 static int num_overlays;
 static struct omap_overlay *overlays;
 
+static inline struct omap_dss_device *dss_ovl_get_device(struct omap_overlay *ovl)
+{
+	return ovl->manager ? ovl->manager->device : NULL;
+}
+
 int omap_dss_get_num_overlays(void)
 {
 	return num_overlays;
@@ -94,6 +99,7 @@ void dss_init_overlays(struct platform_device *pdev)
 		ovl->set_overlay_info = &dss_ovl_set_info;
 		ovl->get_overlay_info = &dss_ovl_get_info;
 		ovl->wait_for_go = &dss_mgr_wait_for_go_ovl;
+		ovl->get_device = &dss_ovl_get_device;
 
 		ovl->caps = dss_feat_get_overlay_caps(ovl->id);
 		ovl->supported_modes =
-- 
cgit v1.2.1


From 4249e61e0440f01d279fa21d121dbf069e6620fa Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 20 Jul 2012 18:26:56 +0530
Subject: OMAPFB: remove manager->device references

With the introduction of output entities, managers will now connect to outputs.
Use the helper op for overlays named get_device. This will abstract away the
information on how to get the device from an overlay.

Using the helper function will reduce the number of pointer dereferences a user
of OMAPDSS needs to do and reduce risk of a NULL dereference.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/omapfb/omapfb-main.c | 6 ++++--
 drivers/video/omap2/omapfb/omapfb.h      | 5 +++--
 2 files changed, 7 insertions(+), 4 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 77ae9edbf2cd..b103793516db 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -2379,6 +2379,7 @@ static int __init omapfb_probe(struct platform_device *pdev)
 	struct omap_overlay *ovl;
 	struct omap_dss_device *def_display;
 	struct omap_dss_device *dssdev;
+	struct omap_dss_device *ovl_device;
 
 	DBG("omapfb_probe\n");
 
@@ -2452,8 +2453,9 @@ static int __init omapfb_probe(struct platform_device *pdev)
 	/* gfx overlay should be the default one. find a display
 	 * connected to that, and use it as default display */
 	ovl = omap_dss_get_overlay(0);
-	if (ovl->manager && ovl->manager->device) {
-		def_display = ovl->manager->device;
+	ovl_device = ovl->get_device(ovl);
+	if (ovl_device) {
+		def_display = ovl_device;
 	} else {
 		dev_warn(&pdev->dev, "cannot find default display\n");
 		def_display = NULL;
diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h
index 30361a09aecd..5ced9b334d35 100644
--- a/drivers/video/omap2/omapfb/omapfb.h
+++ b/drivers/video/omap2/omapfb/omapfb.h
@@ -148,8 +148,9 @@ static inline struct omap_dss_device *fb2display(struct fb_info *fbi)
 
 	/* XXX: returns the display connected to first attached overlay */
 	for (i = 0; i < ofbi->num_overlays; i++) {
-		if (ofbi->overlays[i]->manager)
-			return ofbi->overlays[i]->manager->device;
+		struct omap_overlay *ovl = ofbi->overlays[i];
+
+		return ovl->get_device(ovl);
 	}
 
 	return NULL;
-- 
cgit v1.2.1


From 3224827630f1823c1181e562af9d36951f6cbd11 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 10 Sep 2012 14:34:16 +0530
Subject: OMAPDSS: Create links between managers, outputs and devices

Links between DSS entities are made in dss_init_connections() when a panel
device is registered, and are removed in dss_uninit_connections() when the
device is unregistered. Modify these functions to incorporate the addition of
outputs.

The fields in omap_dss_device struct gives information on which output and
manager to connect to. The desired manager and output pointers are retrieved and
prepared to form the desired links. The output is linked to the device, and then
the manager to the output.

A helper function omapdss_get_output_from_device() is created to retrieve the
output from the display by checking it's type, and the module id in case of DSI.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/display.c | 35 +++++++++++++++++++++++++++--------
 drivers/video/omap2/dss/dss.h     |  1 +
 drivers/video/omap2/dss/output.c  | 33 +++++++++++++++++++++++++++++++++
 3 files changed, 61 insertions(+), 8 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index db83ae81a713..ccf8550fafde 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -327,22 +327,35 @@ EXPORT_SYMBOL(omapdss_default_get_timings);
  */
 static int dss_init_connections(struct omap_dss_device *dssdev, bool force)
 {
+	struct omap_dss_output *out;
 	struct omap_overlay_manager *mgr;
 	int i, r;
 
-	WARN_ON(dssdev->manager);
+	out = omapdss_get_output_from_dssdev(dssdev);
+
+	WARN_ON(dssdev->output);
+	WARN_ON(out->device);
+
+	r = omapdss_output_set_device(out, dssdev);
+	if (r) {
+		DSSERR("failed to connect output to new device\n");
+		return r;
+	}
 
 	mgr = omap_dss_get_overlay_manager(dssdev->channel);
 
-	if (mgr->device && !force)
+	if (mgr->output && !force)
 		return 0;
 
-	if (mgr->device)
-		mgr->unset_device(mgr);
+	if (mgr->output)
+		mgr->unset_output(mgr);
 
-	r = mgr->set_device(mgr, dssdev);
+	r = mgr->set_output(mgr, out);
 	if (r) {
-		DSSERR("failed to set initial manager\n");
+		DSSERR("failed to connect manager to output of new device\n");
+
+		/* remove the output-device connection we just made */
+		omapdss_output_unset_device(out);
 		return r;
 	}
 
@@ -366,8 +379,14 @@ static int dss_init_connections(struct omap_dss_device *dssdev, bool force)
 
 static void dss_uninit_connections(struct omap_dss_device *dssdev)
 {
-	if (dssdev->manager)
-		dssdev->manager->unset_device(dssdev->manager);
+	if (dssdev->output) {
+		struct omap_overlay_manager *mgr = dssdev->output->manager;
+
+		if (mgr)
+			mgr->unset_output(mgr);
+
+		omapdss_output_unset_device(dssdev->output);
+	}
 }
 
 int dss_init_device(struct platform_device *pdev,
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index b5c0df43547f..a14528bcfeab 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -232,6 +232,7 @@ int dss_ovl_unset_manager(struct omap_overlay *ovl);
 /* output */
 void dss_register_output(struct omap_dss_output *out);
 void dss_unregister_output(struct omap_dss_output *out);
+struct omap_dss_output *omapdss_get_output_from_dssdev(struct omap_dss_device *dssdev);
 
 /* display */
 int dss_suspend_all_devices(void);
diff --git a/drivers/video/omap2/dss/output.c b/drivers/video/omap2/dss/output.c
index 1a84b79d5580..813f26682b7a 100644
--- a/drivers/video/omap2/dss/output.c
+++ b/drivers/video/omap2/dss/output.c
@@ -113,3 +113,36 @@ struct omap_dss_output *omap_dss_get_output(enum omap_dss_output_id id)
 
 	return NULL;
 }
+
+struct omap_dss_output *omapdss_get_output_from_dssdev(struct omap_dss_device *dssdev)
+{
+	struct omap_dss_output *out = NULL;
+	enum omap_dss_output_id id;
+
+	switch (dssdev->type) {
+	case OMAP_DISPLAY_TYPE_DPI:
+		out = omap_dss_get_output(OMAP_DSS_OUTPUT_DPI);
+		break;
+	case OMAP_DISPLAY_TYPE_DBI:
+		out = omap_dss_get_output(OMAP_DSS_OUTPUT_DBI);
+		break;
+	case OMAP_DISPLAY_TYPE_SDI:
+		out = omap_dss_get_output(OMAP_DSS_OUTPUT_SDI);
+		break;
+	case OMAP_DISPLAY_TYPE_VENC:
+		out = omap_dss_get_output(OMAP_DSS_OUTPUT_VENC);
+		break;
+	case OMAP_DISPLAY_TYPE_HDMI:
+		out = omap_dss_get_output(OMAP_DSS_OUTPUT_HDMI);
+		break;
+	case OMAP_DISPLAY_TYPE_DSI:
+		id = dssdev->phy.dsi.module == 0 ? OMAP_DSS_OUTPUT_DSI1 :
+					OMAP_DSS_OUTPUT_DSI2;
+		out = omap_dss_get_output(id);
+		break;
+	default:
+		break;
+	}
+
+	return out;
+}
-- 
cgit v1.2.1


From 5d512fcdf6dc27ea34734fbdcab812d207b89ebb Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 7 Sep 2012 17:53:38 +0530
Subject: OMAPDSS: DPI: Replace dssdev->manager with dssdev->output->manager
 references

With addition of output entities, a device connects to an output, and an output
connects to overlay manager. Replace the dssdev->manager references with
dssdev->output->manager to access the manager correctly.

When enabling the DPI output, check whether the output entity connected to
display is not NULL.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dpi.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index ee1fa1e1a015..d73a549050e4 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -128,6 +128,7 @@ static int dpi_set_dispc_clk(struct omap_dss_device *dssdev,
 static int dpi_set_mode(struct omap_dss_device *dssdev)
 {
 	struct omap_video_timings *t = &dpi.timings;
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
 	int lck_div = 0, pck_div = 0;
 	unsigned long fck = 0;
 	unsigned long pck;
@@ -152,13 +153,15 @@ static int dpi_set_mode(struct omap_dss_device *dssdev)
 		t->pixel_clock = pck;
 	}
 
-	dss_mgr_set_timings(dssdev->manager, t);
+	dss_mgr_set_timings(mgr, t);
 
 	return 0;
 }
 
 static void dpi_config_lcd_manager(struct omap_dss_device *dssdev)
 {
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
+
 	dpi.mgr_config.io_pad_mode = DSS_IO_PAD_MODE_BYPASS;
 
 	dpi.mgr_config.stallmode = false;
@@ -168,11 +171,12 @@ static void dpi_config_lcd_manager(struct omap_dss_device *dssdev)
 
 	dpi.mgr_config.lcden_sig_polarity = 0;
 
-	dss_mgr_set_lcd_config(dssdev->manager, &dpi.mgr_config);
+	dss_mgr_set_lcd_config(mgr, &dpi.mgr_config);
 }
 
 int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
 {
+	struct omap_dss_output *out = dssdev->output;
 	int r;
 
 	mutex_lock(&dpi.lock);
@@ -183,10 +187,10 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
 		goto err_no_reg;
 	}
 
-	if (dssdev->manager == NULL) {
-		DSSERR("failed to enable display: no manager\n");
+	if (out == NULL || out->manager == NULL) {
+		DSSERR("failed to enable display: no output/manager\n");
 		r = -ENODEV;
-		goto err_no_mgr;
+		goto err_no_out_mgr;
 	}
 
 	r = omap_dss_start_device(dssdev);
@@ -227,7 +231,7 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
 
 	mdelay(2);
 
-	r = dss_mgr_enable(dssdev->manager);
+	r = dss_mgr_enable(out->manager);
 	if (r)
 		goto err_mgr_enable;
 
@@ -251,7 +255,7 @@ err_get_dispc:
 err_reg_enable:
 	omap_dss_stop_device(dssdev);
 err_start_dev:
-err_no_mgr:
+err_no_out_mgr:
 err_no_reg:
 	mutex_unlock(&dpi.lock);
 	return r;
@@ -260,9 +264,11 @@ EXPORT_SYMBOL(omapdss_dpi_display_enable);
 
 void omapdss_dpi_display_disable(struct omap_dss_device *dssdev)
 {
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
+
 	mutex_lock(&dpi.lock);
 
-	dss_mgr_disable(dssdev->manager);
+	dss_mgr_disable(mgr);
 
 	if (dpi_use_dsi_pll(dssdev)) {
 		dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
@@ -298,12 +304,13 @@ int dpi_check_timings(struct omap_dss_device *dssdev,
 			struct omap_video_timings *timings)
 {
 	int r;
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
 	int lck_div, pck_div;
 	unsigned long fck;
 	unsigned long pck;
 	struct dispc_clock_info dispc_cinfo;
 
-	if (dss_mgr_check_timings(dssdev->manager, timings))
+	if (dss_mgr_check_timings(mgr, timings))
 		return -EINVAL;
 
 	if (timings->pixel_clock == 0)
-- 
cgit v1.2.1


From 400e65d1c9946c9bf4d87a94d71f7d7423d03b62 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Wed, 4 Jul 2012 13:48:34 +0530
Subject: OMAPDSS: DSI: Remove dsi_pdev_map global struct

dsi_pdev_map is a struct visible globally in the DSI driver to get the platform
device pointer of the DSI device corresponding to it's module ID. This was
required because there was no clean way to derive the platform device from
the DSI module instance number or from the connected panel.

With the new output entity, it is possible to retrieve the platform device
pointer if the omap_dss_output pointer is available. Modify the functions
dsi_get_dsidev_from_dssdev() dsi_get_dsidev_from_id() so that they use output
instead of dsi_pdev_map to retrieve the dsi platform device pointer.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dsi.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 55748bc081e8..dbe7d3ec8436 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -345,8 +345,6 @@ struct dsi_packet_sent_handler_data {
 	struct completion *completion;
 };
 
-static struct platform_device *dsi_pdev_map[MAX_NUM_DSI];
-
 #ifdef DEBUG
 static bool dsi_perf;
 module_param(dsi_perf, bool, 0644);
@@ -359,12 +357,19 @@ static inline struct dsi_data *dsi_get_dsidrv_data(struct platform_device *dside
 
 static inline struct platform_device *dsi_get_dsidev_from_dssdev(struct omap_dss_device *dssdev)
 {
-	return dsi_pdev_map[dssdev->phy.dsi.module];
+	return dssdev->output->pdev;
 }
 
 struct platform_device *dsi_get_dsidev_from_id(int module)
 {
-	return dsi_pdev_map[module];
+	struct omap_dss_output *out;
+	enum omap_dss_output_id	id;
+
+	id = module == 0 ? OMAP_DSS_OUTPUT_DSI1 : OMAP_DSS_OUTPUT_DSI2;
+
+	out = omap_dss_get_output(id);
+
+	return out->pdev;
 }
 
 static inline void dsi_write_reg(struct platform_device *dsidev,
@@ -5194,7 +5199,6 @@ static int __init omap_dsihw_probe(struct platform_device *dsidev)
 
 	dsi->module_id = dsidev->id;
 	dsi->pdev = dsidev;
-	dsi_pdev_map[dsi->module_id] = dsidev;
 	dev_set_drvdata(&dsidev->dev, dsi);
 
 	spin_lock_init(&dsi->irq_lock);
-- 
cgit v1.2.1


From eea8340a1da581249a14bc03260af65edf4ededa Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Tue, 4 Sep 2012 11:42:36 +0530
Subject: OMAPDSS: DSI: Replace dssdev->manager with dssdev->output->manager
 references

With addition of output entities, a device connects to an output, and an output
connects to overlay manager. Replace the dssdev->manager references with
dssdev->output->manager to access the manager correctly.

When enabling the DSI output, check whether the output entity connected to
display is not NULL.

In dsi_init_display(), the display won't be connected to the DSI output yet,
that happens later in dss_recheck_connections() in the panel driver's probe. Get
the dsidev platform device pointer using the DSI moudle number provided in the
omap_dss_device struct.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dsi.c | 37 +++++++++++++++++++++++--------------
 1 file changed, 23 insertions(+), 14 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index dbe7d3ec8436..e37e6d868acd 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4333,6 +4333,7 @@ int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
 	int bpp = dsi_get_pixel_size(dsi->pix_fmt);
 	u8 data_type;
 	u16 word_count;
@@ -4372,7 +4373,7 @@ int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
 		dsi_if_enable(dsidev, true);
 	}
 
-	r = dss_mgr_enable(dssdev->manager);
+	r = dss_mgr_enable(mgr);
 	if (r) {
 		if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
 			dsi_if_enable(dsidev, false);
@@ -4390,6 +4391,7 @@ void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
 
 	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE) {
 		dsi_if_enable(dsidev, false);
@@ -4402,7 +4404,7 @@ void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel)
 		dsi_if_enable(dsidev, true);
 	}
 
-	dss_mgr_disable(dssdev->manager);
+	dss_mgr_disable(mgr);
 }
 EXPORT_SYMBOL(dsi_disable_video_output);
 
@@ -4410,6 +4412,7 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
 	unsigned bytespp;
 	unsigned bytespl;
 	unsigned bytespf;
@@ -4471,9 +4474,9 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev)
 		msecs_to_jiffies(250));
 	BUG_ON(r == 0);
 
-	dss_mgr_set_timings(dssdev->manager, &dsi->timings);
+	dss_mgr_set_timings(mgr, &dsi->timings);
 
-	dss_mgr_start_update(dssdev->manager);
+	dss_mgr_start_update(mgr);
 
 	if (dsi->te_enabled) {
 		/* disable LP_RX_TO, so that we can receive TE.  Time to wait
@@ -4601,6 +4604,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
 	int r;
 	u32 irq = 0;
 
@@ -4612,7 +4616,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 		dsi->timings.vfp = 0;
 		dsi->timings.vbp = 0;
 
-		irq = dispc_mgr_get_framedone_irq(dssdev->manager->id);
+		irq = dispc_mgr_get_framedone_irq(mgr->id);
 
 		r = omap_dispc_register_isr(dsi_framedone_irq_callback,
 			(void *) dsidev, irq);
@@ -4639,7 +4643,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 	dsi->timings.de_level = OMAPDSS_SIG_ACTIVE_HIGH;
 	dsi->timings.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES;
 
-	dss_mgr_set_timings(dssdev->manager, &dsi->timings);
+	dss_mgr_set_timings(mgr, &dsi->timings);
 
 	r = dsi_configure_dispc_clocks(dssdev);
 	if (r)
@@ -4650,7 +4654,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
 			dsi_get_pixel_size(dsi->pix_fmt);
 	dsi->mgr_config.lcden_sig_polarity = 0;
 
-	dss_mgr_set_lcd_config(dssdev->manager, &dsi->mgr_config);
+	dss_mgr_set_lcd_config(mgr, &dsi->mgr_config);
 
 	return 0;
 err1:
@@ -4665,11 +4669,12 @@ static void dsi_display_uninit_dispc(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
 
 	if (dsi->mode == OMAP_DSS_DSI_CMD_MODE) {
 		u32 irq;
 
-		irq = dispc_mgr_get_framedone_irq(dssdev->manager->id);
+		irq = dispc_mgr_get_framedone_irq(mgr->id);
 
 		omap_dispc_unregister_isr(dsi_framedone_irq_callback,
 			(void *) dsidev, irq);
@@ -4705,6 +4710,7 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
 	int r;
 
 	r = dsi_pll_init(dsidev, true, true);
@@ -4717,7 +4723,7 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
 
 	dss_select_dispc_clk_source(dssdev->clocks.dispc.dispc_fclk_src);
 	dss_select_dsi_clk_source(dsi->module_id, dssdev->clocks.dsi.dsi_fclk_src);
-	dss_select_lcd_clk_source(dssdev->manager->id,
+	dss_select_lcd_clk_source(mgr->id,
 			dssdev->clocks.dispc.channel.lcd_clk_src);
 
 	DSSDBG("PLL OK\n");
@@ -4752,7 +4758,7 @@ err3:
 err2:
 	dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
 	dss_select_dsi_clk_source(dsi->module_id, OMAP_DSS_CLK_SRC_FCK);
-	dss_select_lcd_clk_source(dssdev->manager->id, OMAP_DSS_CLK_SRC_FCK);
+	dss_select_lcd_clk_source(mgr->id, OMAP_DSS_CLK_SRC_FCK);
 
 err1:
 	dsi_pll_uninit(dsidev, true);
@@ -4765,6 +4771,7 @@ static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev,
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
 
 	if (enter_ulps && !dsi->ulps_enabled)
 		dsi_enter_ulps(dsidev);
@@ -4778,7 +4785,7 @@ static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev,
 
 	dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
 	dss_select_dsi_clk_source(dsi->module_id, OMAP_DSS_CLK_SRC_FCK);
-	dss_select_lcd_clk_source(dssdev->manager->id, OMAP_DSS_CLK_SRC_FCK);
+	dss_select_lcd_clk_source(mgr->id, OMAP_DSS_CLK_SRC_FCK);
 	dsi_cio_uninit(dsidev);
 	dsi_pll_uninit(dsidev, disconnect_lanes);
 }
@@ -4787,6 +4794,7 @@ int omapdss_dsi_display_enable(struct omap_dss_device *dssdev)
 {
 	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+	struct omap_dss_output *out = dssdev->output;
 	int r = 0;
 
 	DSSDBG("dsi_display_enable\n");
@@ -4795,8 +4803,8 @@ int omapdss_dsi_display_enable(struct omap_dss_device *dssdev)
 
 	mutex_lock(&dsi->lock);
 
-	if (dssdev->manager == NULL) {
-		DSSERR("failed to enable display: no manager\n");
+	if (out == NULL || out->manager == NULL) {
+		DSSERR("failed to enable display: no output/manager\n");
 		r = -ENODEV;
 		goto err_start_dev;
 	}
@@ -4953,7 +4961,8 @@ EXPORT_SYMBOL(omapdss_dsi_set_videomode_timings);
 
 static int __init dsi_init_display(struct omap_dss_device *dssdev)
 {
-	struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+	struct platform_device *dsidev =
+			dsi_get_dsidev_from_id(dssdev->phy.dsi.module);
 	struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
 
 	DSSDBG("DSI init\n");
-- 
cgit v1.2.1


From 7d6069e571d7c0882210ab5e885de4a940ef9391 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Tue, 4 Sep 2012 11:49:30 +0530
Subject: OMAPDSS: SDI: Replace dssdev->manager with dssdev->output->manager
 references

With addition of output entities, a device connects to an output, and an output
connects to overlay manager. Replace the dssdev->manager references with
dssdev->output->manager to access the manager correctly.

When enabling the SDI output, check whether the output entity connected to
display is not NULL.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/sdi.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 47f9fe4e1741..86f096aaf4fe 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -42,6 +42,8 @@ static struct {
 
 static void sdi_config_lcd_manager(struct omap_dss_device *dssdev)
 {
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
+
 	sdi.mgr_config.io_pad_mode = DSS_IO_PAD_MODE_BYPASS;
 
 	sdi.mgr_config.stallmode = false;
@@ -50,19 +52,20 @@ static void sdi_config_lcd_manager(struct omap_dss_device *dssdev)
 	sdi.mgr_config.video_port_width = 24;
 	sdi.mgr_config.lcden_sig_polarity = 1;
 
-	dss_mgr_set_lcd_config(dssdev->manager, &sdi.mgr_config);
+	dss_mgr_set_lcd_config(mgr, &sdi.mgr_config);
 }
 
 int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 {
+	struct omap_dss_output *out = dssdev->output;
 	struct omap_video_timings *t = &sdi.timings;
 	struct dss_clock_info dss_cinfo;
 	struct dispc_clock_info dispc_cinfo;
 	unsigned long pck;
 	int r;
 
-	if (dssdev->manager == NULL) {
-		DSSERR("failed to enable display: no manager\n");
+	if (out == NULL || out->manager == NULL) {
+		DSSERR("failed to enable display: no output/manager\n");
 		return -ENODEV;
 	}
 
@@ -101,7 +104,7 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 	}
 
 
-	dss_mgr_set_timings(dssdev->manager, t);
+	dss_mgr_set_timings(out->manager, t);
 
 	r = dss_set_clock_div(&dss_cinfo);
 	if (r)
@@ -120,8 +123,7 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 	 * need to care about the shadow register mechanism for pck-free. The
 	 * exact reason for this is unknown.
 	 */
-	dispc_mgr_set_clock_div(dssdev->manager->id,
-			&sdi.mgr_config.clock_info);
+	dispc_mgr_set_clock_div(out->manager->id, &sdi.mgr_config.clock_info);
 
 	dss_sdi_init(sdi.datapairs);
 	r = dss_sdi_enable();
@@ -129,7 +131,7 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 		goto err_sdi_enable;
 	mdelay(2);
 
-	r = dss_mgr_enable(dssdev->manager);
+	r = dss_mgr_enable(out->manager);
 	if (r)
 		goto err_mgr_enable;
 
@@ -152,7 +154,9 @@ EXPORT_SYMBOL(omapdss_sdi_display_enable);
 
 void omapdss_sdi_display_disable(struct omap_dss_device *dssdev)
 {
-	dss_mgr_disable(dssdev->manager);
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
+
+	dss_mgr_disable(mgr);
 
 	dss_sdi_disable();
 
-- 
cgit v1.2.1


From 1db39c0a28483582c165b4f0ea07ca4a600a4630 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Tue, 4 Sep 2012 11:54:32 +0530
Subject: OMAPDSS: RFBI: Replace dssdev->manager with dssdev->output->manager
 references

With addition of output entities, a device connects to an output, and an output
connects to overlay manager. Replace the dssdev->manager references with
dssdev->output->manager to access the manager correctly.

When enabling the RFBI output, check whether the output entity connected to
display is not NULL.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/rfbi.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 58e51722fccf..7282e5af3e1a 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -312,6 +312,7 @@ static int rfbi_transfer_area(struct omap_dss_device *dssdev,
 {
 	u32 l;
 	int r;
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
 	u16 width = rfbi.timings.x_res;
 	u16 height = rfbi.timings.y_res;
 
@@ -320,9 +321,9 @@ static int rfbi_transfer_area(struct omap_dss_device *dssdev,
 
 	DSSDBG("rfbi_transfer_area %dx%d\n", width, height);
 
-	dss_mgr_set_timings(dssdev->manager, &rfbi.timings);
+	dss_mgr_set_timings(mgr, &rfbi.timings);
 
-	r = dss_mgr_enable(dssdev->manager);
+	r = dss_mgr_enable(mgr);
 	if (r)
 		return r;
 
@@ -851,6 +852,7 @@ static void rfbi_dump_regs(struct seq_file *s)
 
 static void rfbi_config_lcd_manager(struct omap_dss_device *dssdev)
 {
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
 	struct dss_lcd_mgr_config mgr_config;
 
 	mgr_config.io_pad_mode = DSS_IO_PAD_MODE_RFBI;
@@ -862,7 +864,7 @@ static void rfbi_config_lcd_manager(struct omap_dss_device *dssdev)
 	mgr_config.video_port_width = rfbi.pixel_size;
 	mgr_config.lcden_sig_polarity = 0;
 
-	dss_mgr_set_lcd_config(dssdev->manager, &mgr_config);
+	dss_mgr_set_lcd_config(mgr, &mgr_config);
 
 	/*
 	 * Set rfbi.timings with default values, the x_res and y_res fields
@@ -883,15 +885,16 @@ static void rfbi_config_lcd_manager(struct omap_dss_device *dssdev)
 	rfbi.timings.de_level = OMAPDSS_SIG_ACTIVE_HIGH;
 	rfbi.timings.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES;
 
-	dss_mgr_set_timings(dssdev->manager, &rfbi.timings);
+	dss_mgr_set_timings(mgr, &rfbi.timings);
 }
 
 int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
 {
+	struct omap_dss_output *out = dssdev->output;
 	int r;
 
-	if (dssdev->manager == NULL) {
-		DSSERR("failed to enable display: no manager\n");
+	if (out == NULL || out->manager == NULL) {
+		DSSERR("failed to enable display: no output/manager\n");
 		return -ENODEV;
 	}
 
-- 
cgit v1.2.1


From 8f1f736c4521ac709d4c5805fa31d395804b162a Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 7 Sep 2012 17:54:27 +0530
Subject: OMAPDSS: VENC: Replace dssdev->manager with dssdev->output->manager
 references

With addition of output entities, a device connects to an output, and an output
connects to overlay manager. Replace the dssdev->manager references with
dssdev->output->manager to access the manager correctly.

When enabling the VENC output, check whether the output entity connected to
display is not NULL.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/venc.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 24d278b3e7fd..56efa3bb465d 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -429,6 +429,7 @@ static const struct venc_config *venc_timings_to_config(
 
 static int venc_power_on(struct omap_dss_device *dssdev)
 {
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
 	u32 l;
 	int r;
 
@@ -454,13 +455,13 @@ static int venc_power_on(struct omap_dss_device *dssdev)
 
 	venc_write_reg(VENC_OUTPUT_CONTROL, l);
 
-	dss_mgr_set_timings(dssdev->manager, &venc.timings);
+	dss_mgr_set_timings(mgr, &venc.timings);
 
 	r = regulator_enable(venc.vdda_dac_reg);
 	if (r)
 		goto err1;
 
-	r = dss_mgr_enable(dssdev->manager);
+	r = dss_mgr_enable(mgr);
 	if (r)
 		goto err2;
 
@@ -479,10 +480,12 @@ err0:
 
 static void venc_power_off(struct omap_dss_device *dssdev)
 {
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
+
 	venc_write_reg(VENC_OUTPUT_CONTROL, 0);
 	dss_set_dac_pwrdn_bgz(0);
 
-	dss_mgr_disable(dssdev->manager);
+	dss_mgr_disable(mgr);
 
 	regulator_disable(venc.vdda_dac_reg);
 
@@ -497,14 +500,15 @@ unsigned long venc_get_pixel_clock(void)
 
 int omapdss_venc_display_enable(struct omap_dss_device *dssdev)
 {
+	struct omap_dss_output *out = dssdev->output;
 	int r;
 
 	DSSDBG("venc_display_enable\n");
 
 	mutex_lock(&venc.venc_lock);
 
-	if (dssdev->manager == NULL) {
-		DSSERR("Failed to enable display: no manager\n");
+	if (out == NULL || out->manager == NULL) {
+		DSSERR("Failed to enable display: no output/manager\n");
 		r = -ENODEV;
 		goto err0;
 	}
-- 
cgit v1.2.1


From cea87b92da825f24efd11112d414f6c8cdd4ced8 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 7 Sep 2012 17:56:20 +0530
Subject: OMAPDSS: HDMI: Replace dssdev->manager with dssdev->output->manager
 references

With addition of output entities, a device connects to an output, and an output
connects to overlay manager. Replace the dssdev->manager references with
dssdev->output->manager to access the manager correctly.

When enabling the HDMI output, check whether the output entity connected to
display is not NULL.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/hdmi.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 294bf9879434..a48a7dd75b33 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -504,6 +504,7 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 {
 	int r;
 	struct omap_video_timings *p;
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
 	unsigned long phy;
 
 	gpio_set_value(hdmi.ct_cp_hpd_gpio, 1);
@@ -520,7 +521,7 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 	if (r)
 		goto err_runtime_get;
 
-	dss_mgr_disable(dssdev->manager);
+	dss_mgr_disable(mgr);
 
 	p = &hdmi.ip_data.cfg.timings;
 
@@ -562,13 +563,13 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
 	dispc_enable_gamma_table(0);
 
 	/* tv size */
-	dss_mgr_set_timings(dssdev->manager, p);
+	dss_mgr_set_timings(mgr, p);
 
 	r = hdmi.ip_data.ops->video_enable(&hdmi.ip_data);
 	if (r)
 		goto err_vid_enable;
 
-	r = dss_mgr_enable(dssdev->manager);
+	r = dss_mgr_enable(mgr);
 	if (r)
 		goto err_mgr_enable;
 
@@ -592,7 +593,9 @@ err_vdac_enable:
 
 static void hdmi_power_off(struct omap_dss_device *dssdev)
 {
-	dss_mgr_disable(dssdev->manager);
+	struct omap_overlay_manager *mgr = dssdev->output->manager;
+
+	dss_mgr_disable(mgr);
 
 	hdmi.ip_data.ops->video_disable(&hdmi.ip_data);
 	hdmi.ip_data.ops->phy_disable(&hdmi.ip_data);
@@ -689,14 +692,15 @@ bool omapdss_hdmi_detect(void)
 
 int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev)
 {
+	struct omap_dss_output *out = dssdev->output;
 	int r = 0;
 
 	DSSDBG("ENTER hdmi_display_enable\n");
 
 	mutex_lock(&hdmi.lock);
 
-	if (dssdev->manager == NULL) {
-		DSSERR("failed to enable display: no manager\n");
+	if (out == NULL || out->manager == NULL) {
+		DSSERR("failed to enable display: no output/manager\n");
 		r = -ENODEV;
 		goto err0;
 	}
-- 
cgit v1.2.1


From 952cbaaa9b8beacc425f9aedf370468cbb737a2c Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 10 Sep 2012 14:43:39 +0530
Subject: OMAPFB: Change dssdev->manager references

To retrieve the manager pointer via a device, we need to now access it via the
output to which the device is connected. Make this change in omapfb_ioctl()
where the WAITFORVSYNC ioctl tries to access the manager's device.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/omapfb/omapfb-ioctl.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index c6cf372d22c5..606b89f12351 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -599,6 +599,7 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct omapfb2_device *fbdev = ofbi->fbdev;
 	struct omap_dss_device *display = fb2display(fbi);
+	struct omap_overlay_manager *mgr;
 
 	union {
 		struct omapfb_update_window_old	uwnd_o;
@@ -786,12 +787,14 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 
 	case OMAPFB_WAITFORVSYNC:
 		DBG("ioctl WAITFORVSYNC\n");
-		if (!display) {
+		if (!display && !display->output && !display->output->manager) {
 			r = -EINVAL;
 			break;
 		}
 
-		r = display->manager->wait_for_vsync(display->manager);
+		mgr = display->output->manager;
+
+		r = mgr->wait_for_vsync(mgr);
 		break;
 
 	case OMAPFB_WAITFORGO:
-- 
cgit v1.2.1


From 947b2254249ceab769dfa07d5291fd77e387a0c7 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 7 Sep 2012 18:00:07 +0530
Subject: OMAPDSS: MANAGER: Update display sysfs store

The display sysfs attribute's store function needs to be changed with the
introduction of outputs.

The DSS driver ensures that there is one display per output, and that a
registered omap_dss_device will have an output connected to it. The display
sysfs store function unsets the current output connected to the manager, and
sets it with the output connected to the new display. If the new display doesn't
have an output for some reason, we just bail out. The function doesn't set/unset
output->device links. These remain the same as when the omap_dss_device was
registered.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/manager-sysfs.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/manager-sysfs.c b/drivers/video/omap2/dss/manager-sysfs.c
index 55cf955f663d..9a2fb59b6f89 100644
--- a/drivers/video/omap2/dss/manager-sysfs.c
+++ b/drivers/video/omap2/dss/manager-sysfs.c
@@ -69,18 +69,29 @@ static ssize_t manager_display_store(struct omap_overlay_manager *mgr,
 	if (dssdev)
 		DSSDBG("display %s found\n", dssdev->name);
 
-	if (mgr->get_device(mgr)) {
-		r = mgr->unset_device(mgr);
+	if (mgr->output) {
+		r = mgr->unset_output(mgr);
 		if (r) {
-			DSSERR("failed to unset display\n");
+			DSSERR("failed to unset current output\n");
 			goto put_device;
 		}
 	}
 
 	if (dssdev) {
-		r = mgr->set_device(mgr, dssdev);
+		struct omap_dss_output *out = dssdev->output;
+
+		/*
+		 * a registered device should have an output connected to it
+		 * already
+		 */
+		if (!out) {
+			DSSERR("device has no output connected to it\n");
+			goto put_device;
+		}
+
+		r = mgr->set_output(mgr, out);
 		if (r) {
-			DSSERR("failed to set manager\n");
+			DSSERR("failed to set manager output\n");
 			goto put_device;
 		}
 
-- 
cgit v1.2.1


From 80d81d64d6272a622ee6c9d0de871507daa52c89 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Tue, 5 Jun 2012 18:33:28 +0530
Subject: OMAPDSS: OVERLAY/MANAGER: Get device via output

A manager is not connected to a device directly any more. It first connects
to an output, and then to the display. Update overlay and manager get_device ops
to return the device via the connected output.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/manager.c | 2 +-
 drivers/video/omap2/dss/overlay.c | 4 +++-
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index edc372e04bcb..f662eb5c2aeb 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -38,7 +38,7 @@ static struct omap_overlay_manager *managers;
 
 static inline struct omap_dss_device *dss_mgr_get_device(struct omap_overlay_manager *mgr)
 {
-	return mgr->device;
+	return mgr->output ? mgr->output->device : NULL;
 }
 
 static int dss_mgr_wait_for_vsync(struct omap_overlay_manager *mgr)
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 0f799e2d91bb..45f4994bc6b0 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -40,7 +40,9 @@ static struct omap_overlay *overlays;
 
 static inline struct omap_dss_device *dss_ovl_get_device(struct omap_overlay *ovl)
 {
-	return ovl->manager ? ovl->manager->device : NULL;
+	return ovl->manager ?
+		(ovl->manager->output ? ovl->manager->output->device : NULL) :
+		NULL;
 }
 
 int omap_dss_get_num_overlays(void)
-- 
cgit v1.2.1


From 0f0e4e3cd8030c3056e8f43196a112e887a545f9 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 3 Sep 2012 17:14:09 +0530
Subject: OMAPDSS: APPLY: Remove omap_dss_device references from
 dss_ovl_enable/disable

An overlay isn't allowed to be enabled/disabled if it isn't connected to an
omap_dss_device. This requirement isn't needed any more. An overlay can be
enabled/disabled as long as it has an output connected to it. The output may
not be connected to a device, but we can be assured that the connected
manager's output is in use by an output interface.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/apply.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 417b286132f5..4bd1c998e12d 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -1464,7 +1464,7 @@ int dss_ovl_enable(struct omap_overlay *ovl)
 		goto err1;
 	}
 
-	if (ovl->get_device(ovl) == NULL) {
+	if (ovl->manager == NULL || ovl->manager->output == NULL) {
 		r = -EINVAL;
 		goto err1;
 	}
@@ -1514,7 +1514,7 @@ int dss_ovl_disable(struct omap_overlay *ovl)
 		goto err;
 	}
 
-	if (ovl->get_device(ovl) == NULL) {
+	if (ovl->manager == NULL || ovl->manager->output == NULL) {
 		r = -EINVAL;
 		goto err;
 	}
-- 
cgit v1.2.1


From 3c2995ac34eb559106504be962b162aef215895b Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Tue, 5 Jun 2012 18:37:27 +0530
Subject: OMAPDSS: Remove old way of setting manager and device links

Now that an omap_dss_output can be used to link between managers and devices, we
can remove the old way of setting manager and device links. This involves
removing the device and manager pointers from omap_overlay_manager and
omap_dss_device respectively, and removing the set_device/unset_device ops from
omap_overlay_manager.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/apply.c   | 64 ---------------------------------------
 drivers/video/omap2/dss/manager.c |  2 --
 2 files changed, 66 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 4bd1c998e12d..2b1fa851a8b9 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -1110,70 +1110,6 @@ void dss_mgr_get_info(struct omap_overlay_manager *mgr,
 	spin_unlock_irqrestore(&data_lock, flags);
 }
 
-int dss_mgr_set_device(struct omap_overlay_manager *mgr,
-		struct omap_dss_device *dssdev)
-{
-	int r;
-
-	mutex_lock(&apply_lock);
-
-	if (dssdev->manager) {
-		DSSERR("display '%s' already has a manager '%s'\n",
-			       dssdev->name, dssdev->manager->name);
-		r = -EINVAL;
-		goto err;
-	}
-
-	if ((mgr->supported_displays & dssdev->type) == 0) {
-		DSSERR("display '%s' does not support manager '%s'\n",
-			       dssdev->name, mgr->name);
-		r = -EINVAL;
-		goto err;
-	}
-
-	dssdev->manager = mgr;
-	mgr->device = dssdev;
-
-	mutex_unlock(&apply_lock);
-
-	return 0;
-err:
-	mutex_unlock(&apply_lock);
-	return r;
-}
-
-int dss_mgr_unset_device(struct omap_overlay_manager *mgr)
-{
-	int r;
-
-	mutex_lock(&apply_lock);
-
-	if (!mgr->device) {
-		DSSERR("failed to unset display, display not set.\n");
-		r = -EINVAL;
-		goto err;
-	}
-
-	/*
-	 * Don't allow currently enabled displays to have the overlay manager
-	 * pulled out from underneath them
-	 */
-	if (mgr->device->state != OMAP_DSS_DISPLAY_DISABLED) {
-		r = -EINVAL;
-		goto err;
-	}
-
-	mgr->device->manager = NULL;
-	mgr->device = NULL;
-
-	mutex_unlock(&apply_lock);
-
-	return 0;
-err:
-	mutex_unlock(&apply_lock);
-	return r;
-}
-
 int dss_mgr_set_output(struct omap_overlay_manager *mgr,
 		struct omap_dss_output *output)
 {
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index f662eb5c2aeb..c54d2f620ce3 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -99,8 +99,6 @@ int dss_init_overlay_managers(struct platform_device *pdev)
 			break;
 		}
 
-		mgr->set_device = &dss_mgr_set_device;
-		mgr->unset_device = &dss_mgr_unset_device;
 		mgr->set_output = &dss_mgr_set_output;
 		mgr->unset_output = &dss_mgr_unset_output;
 		mgr->apply = &omap_dss_mgr_apply;
-- 
cgit v1.2.1


From 8eeb7019a4d1e5402b4bd5371562fe93dc1ed3dc Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Wed, 22 Aug 2012 12:33:49 +0530
Subject: OMAPDSS: DISPC: Constify omap_overlay_info in dispc_ovl_setup()

The struct omap_overlay_info passed to dispc_ovl_setup() is used to configure
DISPC registers. It shouldn't modify the overlay_info structure. The pos_y field
was being changed in dispc_ovl_setup in the case of interlaced displays. Fix
this and const qualifier to the omap_overlay_info argument.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 9 +++++----
 drivers/video/omap2/dss/dss.h   | 2 +-
 2 files changed, 6 insertions(+), 5 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 811fe381aaea..35d388b6aec1 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -2255,7 +2255,7 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 	return 0;
 }
 
-int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
+int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 		bool replication, const struct omap_video_timings *mgr_timings)
 {
 	struct omap_overlay *ovl = omap_dss_get_overlay(plane);
@@ -2273,6 +2273,7 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 	enum omap_channel channel;
 	int x_predecim = 1, y_predecim = 1;
 	bool ilace = mgr_timings->interlace;
+	u16 pos_y = oi->pos_y;
 
 	channel = dispc_ovl_get_channel_out(plane);
 
@@ -2295,12 +2296,12 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 	if (ilace) {
 		if (fieldmode)
 			in_height /= 2;
-		oi->pos_y /= 2;
+		pos_y /= 2;
 		out_height /= 2;
 
 		DSSDBG("adjusting for ilace: height %d, pos_y %d, "
 				"out_height %d\n",
-				in_height, oi->pos_y, out_height);
+				in_height, pos_y, out_height);
 	}
 
 	if (!dss_feat_color_mode_supported(plane, oi->color_mode))
@@ -2384,7 +2385,7 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 	DSSDBG("%d,%d %dx%d -> %dx%d\n", oi->pos_x, oi->pos_y, in_width,
 			in_height, out_width, out_height);
 
-	dispc_ovl_set_pos(plane, oi->pos_x, oi->pos_y);
+	dispc_ovl_set_pos(plane, oi->pos_x, pos_y);
 
 	dispc_ovl_set_pic_size(plane, in_width, in_height);
 
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index a14528bcfeab..e71a6f16fc4d 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -444,7 +444,7 @@ void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high);
 void dispc_ovl_compute_fifo_thresholds(enum omap_plane plane,
 		u32 *fifo_low, u32 *fifo_high, bool use_fifomerge,
 		bool manual_update);
-int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
+int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 		bool replication, const struct omap_video_timings *mgr_timings);
 int dispc_ovl_enable(enum omap_plane plane, bool enable);
 void dispc_ovl_set_channel_out(enum omap_plane plane,
-- 
cgit v1.2.1


From 78b687fc4ffa27d48c793f9669d53a6f4351e239 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 21 Sep 2012 14:51:49 +0530
Subject: OMAPDSS: DISPC: Simplify function names for setting pipeline input
 and output sizes

The DISPC pipeline register names in the TRM for setting the buffer size and
the output size are a bit misleading, for example, there are different register
names for setting the buffer size for VID and GFX pipes. Things get more
confusing when considering writeback pipeline.

Rename the functions so that they tell whether they are configuring the input
to the scalar or the output. These will be extended later to support writeback
registers.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 35d388b6aec1..56e23040df08 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -705,7 +705,8 @@ static void dispc_ovl_set_pos(enum omap_plane plane, int x, int y)
 	dispc_write_reg(DISPC_OVL_POSITION(plane), val);
 }
 
-static void dispc_ovl_set_pic_size(enum omap_plane plane, int width, int height)
+static void dispc_ovl_set_input_size(enum omap_plane plane, int width,
+		int height)
 {
 	u32 val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
 
@@ -715,7 +716,8 @@ static void dispc_ovl_set_pic_size(enum omap_plane plane, int width, int height)
 		dispc_write_reg(DISPC_OVL_PICTURE_SIZE(plane), val);
 }
 
-static void dispc_ovl_set_vid_size(enum omap_plane plane, int width, int height)
+static void dispc_ovl_set_output_size(enum omap_plane plane, int width,
+		int height)
 {
 	u32 val;
 
@@ -2387,13 +2389,14 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 
 	dispc_ovl_set_pos(plane, oi->pos_x, pos_y);
 
-	dispc_ovl_set_pic_size(plane, in_width, in_height);
+	dispc_ovl_set_input_size(plane, in_width, in_height);
 
 	if (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) {
 		dispc_ovl_set_scaling(plane, in_width, in_height, out_width,
 				   out_height, ilace, five_taps, fieldmode,
 				   oi->color_mode, oi->rotation);
-		dispc_ovl_set_vid_size(plane, out_width, out_height);
+
+		dispc_ovl_set_output_size(plane, out_width, out_height);
 		dispc_ovl_set_vid_color_conv(plane, cconv);
 	}
 
-- 
cgit v1.2.1


From 5b54ed3ec36ddc8ac25aff9233c7d3fb3e2b629a Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Wed, 26 Sep 2012 16:55:27 +0530
Subject: OMAPDSS: DISPC: Pass overlay caps as a parameter to dispc plane
 functions

Currently, the functions below take the omap_plane parameter and derive the
overlay caps within them. Pass the overlay caps as a parameter to the function
to allow these to be used by writeback too.

- dispc_ovl_set_zorder()
- dispc_ovl_set_pre_mult_alpha()
- dispc_ovl_setup_global_alpha()
- dispc_ovl_calc_scaling()
- dispc_ovl_setup()

These functions will be used for writeback later, and the caps will help in
deciding if they are to be used for writeback or not. This allows reuse of
overlay caps for writeback.

Using omap_overlay_caps for writeback seems a bit incorrect, but caps is
something already in use by users of OMAPDSS(omapfb/omap_vout), so we use
overlay caps for overlay like features of writeback too.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 36 +++++++++++++++++-------------------
 1 file changed, 17 insertions(+), 19 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 56e23040df08..334842a3b527 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -728,11 +728,10 @@ static void dispc_ovl_set_output_size(enum omap_plane plane, int width,
 	dispc_write_reg(DISPC_OVL_SIZE(plane), val);
 }
 
-static void dispc_ovl_set_zorder(enum omap_plane plane, u8 zorder)
+static void dispc_ovl_set_zorder(enum omap_plane plane,
+		enum omap_overlay_caps caps, u8 zorder)
 {
-	struct omap_overlay *ovl = omap_dss_get_overlay(plane);
-
-	if ((ovl->caps & OMAP_DSS_OVL_CAP_ZORDER) == 0)
+	if ((caps & OMAP_DSS_OVL_CAP_ZORDER) == 0)
 		return;
 
 	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), zorder, 27, 26);
@@ -749,23 +748,22 @@ static void dispc_ovl_enable_zorder_planes(void)
 		REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(i), 1, 25, 25);
 }
 
-static void dispc_ovl_set_pre_mult_alpha(enum omap_plane plane, bool enable)
+static void dispc_ovl_set_pre_mult_alpha(enum omap_plane plane,
+		enum omap_overlay_caps caps, bool enable)
 {
-	struct omap_overlay *ovl = omap_dss_get_overlay(plane);
-
-	if ((ovl->caps & OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA) == 0)
+	if ((caps & OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA) == 0)
 		return;
 
 	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), enable ? 1 : 0, 28, 28);
 }
 
-static void dispc_ovl_setup_global_alpha(enum omap_plane plane, u8 global_alpha)
+static void dispc_ovl_setup_global_alpha(enum omap_plane plane,
+		enum omap_overlay_caps caps, u8 global_alpha)
 {
 	static const unsigned shifts[] = { 0, 8, 16, 24, };
 	int shift;
-	struct omap_overlay *ovl = omap_dss_get_overlay(plane);
 
-	if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) == 0)
+	if ((caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) == 0)
 		return;
 
 	shift = shifts[plane];
@@ -2193,14 +2191,13 @@ static int dispc_ovl_calc_scaling_44xx(enum omap_channel channel,
 }
 
 static int dispc_ovl_calc_scaling(enum omap_plane plane,
-		enum omap_channel channel,
+		enum omap_overlay_caps caps, enum omap_channel channel,
 		const struct omap_video_timings *mgr_timings,
 		u16 width, u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode, bool *five_taps,
 		int *x_predecim, int *y_predecim, u16 pos_x,
 		enum omap_dss_rotation_type rotation_type)
 {
-	struct omap_overlay *ovl = omap_dss_get_overlay(plane);
 	const int maxdownscale = dss_feat_get_param_max(FEAT_PARAM_DOWNSCALE);
 	const int max_decim_limit = 16;
 	unsigned long core_clk = 0;
@@ -2209,7 +2206,7 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 	if (width == out_width && height == out_height)
 		return 0;
 
-	if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0)
+	if ((caps & OMAP_DSS_OVL_CAP_SCALE) == 0)
 		return -EINVAL;
 
 	*x_predecim = max_decim_limit;
@@ -2261,6 +2258,7 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 		bool replication, const struct omap_video_timings *mgr_timings)
 {
 	struct omap_overlay *ovl = omap_dss_get_overlay(plane);
+	enum omap_overlay_caps caps = ovl->caps;
 	bool five_taps = true;
 	bool fieldmode = 0;
 	int r, cconv = 0;
@@ -2309,7 +2307,7 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 	if (!dss_feat_color_mode_supported(plane, oi->color_mode))
 		return -EINVAL;
 
-	r = dispc_ovl_calc_scaling(plane, channel, mgr_timings, in_width,
+	r = dispc_ovl_calc_scaling(plane, caps, channel, mgr_timings, in_width,
 			in_height, out_width, out_height, oi->color_mode,
 			&five_taps, &x_predecim, &y_predecim, oi->pos_x,
 			oi->rotation_type);
@@ -2391,7 +2389,7 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 
 	dispc_ovl_set_input_size(plane, in_width, in_height);
 
-	if (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) {
+	if (caps & OMAP_DSS_OVL_CAP_SCALE) {
 		dispc_ovl_set_scaling(plane, in_width, in_height, out_width,
 				   out_height, ilace, five_taps, fieldmode,
 				   oi->color_mode, oi->rotation);
@@ -2403,9 +2401,9 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 	dispc_ovl_set_rotation_attrs(plane, oi->rotation, oi->mirror,
 			oi->color_mode);
 
-	dispc_ovl_set_zorder(plane, oi->zorder);
-	dispc_ovl_set_pre_mult_alpha(plane, oi->pre_mult_alpha);
-	dispc_ovl_setup_global_alpha(plane, oi->global_alpha);
+	dispc_ovl_set_zorder(plane, caps, oi->zorder);
+	dispc_ovl_set_pre_mult_alpha(plane, caps, oi->pre_mult_alpha);
+	dispc_ovl_setup_global_alpha(plane, caps, oi->global_alpha);
 
 	dispc_ovl_enable_replication(plane, replication);
 
-- 
cgit v1.2.1


From d79db853000c271fbfc944dc1d4f527805109b0c Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Sat, 22 Sep 2012 12:30:17 +0530
Subject: OMAPDSS: OVERLAY: Add position and replication as overlay caps

Add position and replication as overlay caps, and pass overlay caps as an
argument to the corresponding functions. Adding position and replication to
overlay caps seems a bit unnecessary, but it allows us to use the
corresponding functions for writeback too.

These caps will be set for all overlays, but not for writeback. This is done
so writeback can reuse dispc_ovl_setup() to the maximum.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c        | 20 +++++++++++++-----
 drivers/video/omap2/dss/dss_features.c | 38 ++++++++++++++++++++++------------
 2 files changed, 40 insertions(+), 18 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 334842a3b527..3e1007810f83 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -698,9 +698,15 @@ static void dispc_ovl_set_ba1_uv(enum omap_plane plane, u32 paddr)
 	dispc_write_reg(DISPC_OVL_BA1_UV(plane), paddr);
 }
 
-static void dispc_ovl_set_pos(enum omap_plane plane, int x, int y)
+static void dispc_ovl_set_pos(enum omap_plane plane,
+		enum omap_overlay_caps caps, int x, int y)
 {
-	u32 val = FLD_VAL(y, 26, 16) | FLD_VAL(x, 10, 0);
+	u32 val;
+
+	if ((caps & OMAP_DSS_OVL_CAP_POS) == 0)
+		return;
+
+	val = FLD_VAL(y, 26, 16) | FLD_VAL(x, 10, 0);
 
 	dispc_write_reg(DISPC_OVL_POSITION(plane), val);
 }
@@ -1051,11 +1057,15 @@ static void dispc_ovl_set_vid_color_conv(enum omap_plane plane, bool enable)
 	dispc_write_reg(DISPC_OVL_ATTRIBUTES(plane), val);
 }
 
-static void dispc_ovl_enable_replication(enum omap_plane plane, bool enable)
+static void dispc_ovl_enable_replication(enum omap_plane plane,
+		enum omap_overlay_caps caps, bool enable)
 {
 	static const unsigned shifts[] = { 5, 10, 10, 10 };
 	int shift;
 
+	if ((caps & OMAP_DSS_OVL_CAP_REPLICATION) == 0)
+		return;
+
 	shift = shifts[plane];
 	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), enable, shift, shift);
 }
@@ -2385,7 +2395,7 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 	DSSDBG("%d,%d %dx%d -> %dx%d\n", oi->pos_x, oi->pos_y, in_width,
 			in_height, out_width, out_height);
 
-	dispc_ovl_set_pos(plane, oi->pos_x, pos_y);
+	dispc_ovl_set_pos(plane, caps, oi->pos_x, pos_y);
 
 	dispc_ovl_set_input_size(plane, in_width, in_height);
 
@@ -2405,7 +2415,7 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 	dispc_ovl_set_pre_mult_alpha(plane, caps, oi->pre_mult_alpha);
 	dispc_ovl_setup_global_alpha(plane, caps, oi->global_alpha);
 
-	dispc_ovl_enable_replication(plane, replication);
+	dispc_ovl_enable_replication(plane, caps, replication);
 
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index bfe7fc7b8593..5a5c25b134b1 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -314,54 +314,66 @@ static const enum omap_color_mode omap4_dss_supported_color_modes[] = {
 
 static const enum omap_overlay_caps omap2_dss_overlay_caps[] = {
 	/* OMAP_DSS_GFX */
-	0,
+	OMAP_DSS_OVL_CAP_POS | OMAP_DSS_OVL_CAP_REPLICATION,
 
 	/* OMAP_DSS_VIDEO1 */
-	OMAP_DSS_OVL_CAP_SCALE,
+	OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_POS |
+		OMAP_DSS_OVL_CAP_REPLICATION,
 
 	/* OMAP_DSS_VIDEO2 */
-	OMAP_DSS_OVL_CAP_SCALE,
+	OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_POS |
+		OMAP_DSS_OVL_CAP_REPLICATION,
 };
 
 static const enum omap_overlay_caps omap3430_dss_overlay_caps[] = {
 	/* OMAP_DSS_GFX */
-	OMAP_DSS_OVL_CAP_GLOBAL_ALPHA,
+	OMAP_DSS_OVL_CAP_GLOBAL_ALPHA | OMAP_DSS_OVL_CAP_POS |
+		OMAP_DSS_OVL_CAP_REPLICATION,
 
 	/* OMAP_DSS_VIDEO1 */
-	OMAP_DSS_OVL_CAP_SCALE,
+	OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_POS |
+		OMAP_DSS_OVL_CAP_REPLICATION,
 
 	/* OMAP_DSS_VIDEO2 */
-	OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_GLOBAL_ALPHA,
+	OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_GLOBAL_ALPHA |
+		OMAP_DSS_OVL_CAP_POS | OMAP_DSS_OVL_CAP_REPLICATION,
 };
 
 static const enum omap_overlay_caps omap3630_dss_overlay_caps[] = {
 	/* OMAP_DSS_GFX */
-	OMAP_DSS_OVL_CAP_GLOBAL_ALPHA | OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA,
+	OMAP_DSS_OVL_CAP_GLOBAL_ALPHA | OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA |
+		OMAP_DSS_OVL_CAP_POS | OMAP_DSS_OVL_CAP_REPLICATION,
 
 	/* OMAP_DSS_VIDEO1 */
-	OMAP_DSS_OVL_CAP_SCALE,
+	OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_POS |
+		OMAP_DSS_OVL_CAP_REPLICATION,
 
 	/* OMAP_DSS_VIDEO2 */
 	OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_GLOBAL_ALPHA |
-		OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA,
+		OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA | OMAP_DSS_OVL_CAP_POS |
+		OMAP_DSS_OVL_CAP_REPLICATION,
 };
 
 static const enum omap_overlay_caps omap4_dss_overlay_caps[] = {
 	/* OMAP_DSS_GFX */
 	OMAP_DSS_OVL_CAP_GLOBAL_ALPHA | OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA |
-		OMAP_DSS_OVL_CAP_ZORDER,
+		OMAP_DSS_OVL_CAP_ZORDER | OMAP_DSS_OVL_CAP_POS |
+		OMAP_DSS_OVL_CAP_REPLICATION,
 
 	/* OMAP_DSS_VIDEO1 */
 	OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_GLOBAL_ALPHA |
-		OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA | OMAP_DSS_OVL_CAP_ZORDER,
+		OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA | OMAP_DSS_OVL_CAP_ZORDER |
+		OMAP_DSS_OVL_CAP_POS | OMAP_DSS_OVL_CAP_REPLICATION,
 
 	/* OMAP_DSS_VIDEO2 */
 	OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_GLOBAL_ALPHA |
-		OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA | OMAP_DSS_OVL_CAP_ZORDER,
+		OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA | OMAP_DSS_OVL_CAP_ZORDER |
+		OMAP_DSS_OVL_CAP_POS | OMAP_DSS_OVL_CAP_REPLICATION,
 
 	/* OMAP_DSS_VIDEO3 */
 	OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_GLOBAL_ALPHA |
-		OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA | OMAP_DSS_OVL_CAP_ZORDER,
+		OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA | OMAP_DSS_OVL_CAP_ZORDER |
+		OMAP_DSS_OVL_CAP_POS | OMAP_DSS_OVL_CAP_REPLICATION,
 };
 
 static const char * const omap2_dss_clk_source_names[] = {
-- 
cgit v1.2.1


From 84a880fd51cb528ae7499d0e971a3d4f4587401a Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Wed, 26 Sep 2012 16:57:37 +0530
Subject: OMAPDSS: DISPC: Make dispc_ovl_setup call dispc_ovl_setup_common

Add a new static function called dispc_ovl_setup_common(). This function is used by
dispc_ovl_setup() to configure the overlay registers. This split is done so that
dispc_wb_setup() can reuse overlay register configuration related code.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 130 ++++++++++++++++++++++------------------
 1 file changed, 72 insertions(+), 58 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 3e1007810f83..9c23ce8aed49 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -2264,43 +2264,35 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 	return 0;
 }
 
-int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
+static int dispc_ovl_setup_common(enum omap_plane plane,
+		enum omap_channel channel, enum omap_overlay_caps caps,
+		u32 paddr, u32 p_uv_addr, u16 screen_width, int pos_x,
+		int pos_y, u16 width, u16 height, u16 out_width, u16 out_height,
+		enum omap_color_mode color_mode, u8 rotation, bool mirror,
+		u8 zorder, u8 pre_mult_alpha, u8 global_alpha,
+		enum omap_dss_rotation_type rotation_type,
 		bool replication, const struct omap_video_timings *mgr_timings)
 {
-	struct omap_overlay *ovl = omap_dss_get_overlay(plane);
-	enum omap_overlay_caps caps = ovl->caps;
 	bool five_taps = true;
 	bool fieldmode = 0;
 	int r, cconv = 0;
 	unsigned offset0, offset1;
 	s32 row_inc;
 	s32 pix_inc;
-	u16 frame_height = oi->height;
+	u16 frame_height = height;
 	unsigned int field_offset = 0;
-	u16 in_height = oi->height;
-	u16 in_width = oi->width;
-	u16 out_width, out_height;
-	enum omap_channel channel;
+	u16 in_height = height;
+	u16 in_width = width;
 	int x_predecim = 1, y_predecim = 1;
 	bool ilace = mgr_timings->interlace;
-	u16 pos_y = oi->pos_y;
-
-	channel = dispc_ovl_get_channel_out(plane);
-
-	DSSDBG("dispc_ovl_setup %d, pa %x, pa_uv %x, sw %d, %d,%d, %dx%d -> "
-		"%dx%d, cmode %x, rot %d, mir %d, ilace %d chan %d repl %d\n",
-		plane, oi->paddr, oi->p_uv_addr,
-		oi->screen_width, oi->pos_x, oi->pos_y, oi->width, oi->height,
-		oi->out_width, oi->out_height, oi->color_mode, oi->rotation,
-		oi->mirror, ilace, channel, replication);
 
-	if (oi->paddr == 0)
+	if (paddr == 0)
 		return -EINVAL;
 
-	out_width = oi->out_width == 0 ? oi->width : oi->out_width;
-	out_height = oi->out_height == 0 ? oi->height : oi->out_height;
+	out_width = out_width == 0 ? width : out_width;
+	out_height = out_height == 0 ? height : out_height;
 
-	if (ilace && oi->height == out_height)
+	if (ilace && height == out_height)
 		fieldmode = 1;
 
 	if (ilace) {
@@ -2310,26 +2302,26 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 		out_height /= 2;
 
 		DSSDBG("adjusting for ilace: height %d, pos_y %d, "
-				"out_height %d\n",
-				in_height, pos_y, out_height);
+			"out_height %d\n", in_height, pos_y,
+			out_height);
 	}
 
-	if (!dss_feat_color_mode_supported(plane, oi->color_mode))
+	if (!dss_feat_color_mode_supported(plane, color_mode))
 		return -EINVAL;
 
 	r = dispc_ovl_calc_scaling(plane, caps, channel, mgr_timings, in_width,
-			in_height, out_width, out_height, oi->color_mode,
-			&five_taps, &x_predecim, &y_predecim, oi->pos_x,
-			oi->rotation_type);
+			in_height, out_width, out_height, color_mode,
+			&five_taps, &x_predecim, &y_predecim, pos_x,
+			rotation_type);
 	if (r)
 		return r;
 
 	in_width = DIV_ROUND_UP(in_width, x_predecim);
 	in_height = DIV_ROUND_UP(in_height, y_predecim);
 
-	if (oi->color_mode == OMAP_DSS_COLOR_YUV2 ||
-			oi->color_mode == OMAP_DSS_COLOR_UYVY ||
-			oi->color_mode == OMAP_DSS_COLOR_NV12)
+	if (color_mode == OMAP_DSS_COLOR_YUV2 ||
+			color_mode == OMAP_DSS_COLOR_UYVY ||
+			color_mode == OMAP_DSS_COLOR_NV12)
 		cconv = 1;
 
 	if (ilace && !fieldmode) {
@@ -2355,71 +2347,93 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 	row_inc = 0;
 	pix_inc = 0;
 
-	if (oi->rotation_type == OMAP_DSS_ROT_TILER)
-		calc_tiler_rotation_offset(oi->screen_width, in_width,
-				oi->color_mode, fieldmode, field_offset,
+	if (rotation_type == OMAP_DSS_ROT_TILER)
+		calc_tiler_rotation_offset(screen_width, in_width,
+				color_mode, fieldmode, field_offset,
 				&offset0, &offset1, &row_inc, &pix_inc,
 				x_predecim, y_predecim);
-	else if (oi->rotation_type == OMAP_DSS_ROT_DMA)
-		calc_dma_rotation_offset(oi->rotation, oi->mirror,
-				oi->screen_width, in_width, frame_height,
-				oi->color_mode, fieldmode, field_offset,
+	else if (rotation_type == OMAP_DSS_ROT_DMA)
+		calc_dma_rotation_offset(rotation, mirror,
+				screen_width, in_width, frame_height,
+				color_mode, fieldmode, field_offset,
 				&offset0, &offset1, &row_inc, &pix_inc,
 				x_predecim, y_predecim);
 	else
-		calc_vrfb_rotation_offset(oi->rotation, oi->mirror,
-				oi->screen_width, in_width, frame_height,
-				oi->color_mode, fieldmode, field_offset,
+		calc_vrfb_rotation_offset(rotation, mirror,
+				screen_width, in_width, frame_height,
+				color_mode, fieldmode, field_offset,
 				&offset0, &offset1, &row_inc, &pix_inc,
 				x_predecim, y_predecim);
 
 	DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n",
 			offset0, offset1, row_inc, pix_inc);
 
-	dispc_ovl_set_color_mode(plane, oi->color_mode);
+	dispc_ovl_set_color_mode(plane, color_mode);
 
-	dispc_ovl_configure_burst_type(plane, oi->rotation_type);
+	dispc_ovl_configure_burst_type(plane, rotation_type);
 
-	dispc_ovl_set_ba0(plane, oi->paddr + offset0);
-	dispc_ovl_set_ba1(plane, oi->paddr + offset1);
+	dispc_ovl_set_ba0(plane, paddr + offset0);
+	dispc_ovl_set_ba1(plane, paddr + offset1);
 
-	if (OMAP_DSS_COLOR_NV12 == oi->color_mode) {
-		dispc_ovl_set_ba0_uv(plane, oi->p_uv_addr + offset0);
-		dispc_ovl_set_ba1_uv(plane, oi->p_uv_addr + offset1);
+	if (OMAP_DSS_COLOR_NV12 == color_mode) {
+		dispc_ovl_set_ba0_uv(plane, p_uv_addr + offset0);
+		dispc_ovl_set_ba1_uv(plane, p_uv_addr + offset1);
 	}
 
-
 	dispc_ovl_set_row_inc(plane, row_inc);
 	dispc_ovl_set_pix_inc(plane, pix_inc);
 
-	DSSDBG("%d,%d %dx%d -> %dx%d\n", oi->pos_x, oi->pos_y, in_width,
+	DSSDBG("%d,%d %dx%d -> %dx%d\n", pos_x, pos_y, in_width,
 			in_height, out_width, out_height);
 
-	dispc_ovl_set_pos(plane, caps, oi->pos_x, pos_y);
+	dispc_ovl_set_pos(plane, caps, pos_x, pos_y);
 
 	dispc_ovl_set_input_size(plane, in_width, in_height);
 
 	if (caps & OMAP_DSS_OVL_CAP_SCALE) {
 		dispc_ovl_set_scaling(plane, in_width, in_height, out_width,
 				   out_height, ilace, five_taps, fieldmode,
-				   oi->color_mode, oi->rotation);
-
+				   color_mode, rotation);
 		dispc_ovl_set_output_size(plane, out_width, out_height);
 		dispc_ovl_set_vid_color_conv(plane, cconv);
 	}
 
-	dispc_ovl_set_rotation_attrs(plane, oi->rotation, oi->mirror,
-			oi->color_mode);
+	dispc_ovl_set_rotation_attrs(plane, rotation, mirror, color_mode);
 
-	dispc_ovl_set_zorder(plane, caps, oi->zorder);
-	dispc_ovl_set_pre_mult_alpha(plane, caps, oi->pre_mult_alpha);
-	dispc_ovl_setup_global_alpha(plane, caps, oi->global_alpha);
+	dispc_ovl_set_zorder(plane, caps, zorder);
+	dispc_ovl_set_pre_mult_alpha(plane, caps, pre_mult_alpha);
+	dispc_ovl_setup_global_alpha(plane, caps, global_alpha);
 
 	dispc_ovl_enable_replication(plane, caps, replication);
 
 	return 0;
 }
 
+int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
+		bool replication, const struct omap_video_timings *mgr_timings)
+{
+	int r;
+	struct omap_overlay *ovl = omap_dss_get_overlay(plane);
+	enum omap_channel channel;
+
+	channel = dispc_ovl_get_channel_out(plane);
+
+	DSSDBG("dispc_ovl_setup %d, pa %x, pa_uv %x, sw %d, %d,%d, %dx%d -> "
+		"%dx%d, cmode %x, rot %d, mir %d, chan %d repl %d\n",
+		plane, oi->paddr, oi->p_uv_addr, oi->screen_width, oi->pos_x,
+		oi->pos_y, oi->width, oi->height, oi->out_width, oi->out_height,
+		oi->color_mode, oi->rotation, oi->mirror, channel, replication);
+
+	r = dispc_ovl_setup_common(plane, channel, ovl->caps, oi->paddr,
+		oi->p_uv_addr, oi->screen_width, oi->pos_x, oi->pos_y,
+		oi->width, oi->height, oi->out_width, oi->out_height,
+		oi->color_mode, oi->rotation, oi->mirror, oi->zorder,
+		oi->pre_mult_alpha, oi->global_alpha, oi->rotation_type,
+		replication, mgr_timings);
+
+	return r;
+}
+
 int dispc_ovl_enable(enum omap_plane plane, bool enable)
 {
 	DSSDBG("dispc_enable_plane %d, %d\n", plane, enable);
-- 
cgit v1.2.1


From 3e8a6ff2489510f529364f3c3f8b8881d599fd5c Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Wed, 26 Sep 2012 16:58:52 +0530
Subject: OMAPDSS: DISPC: Don't pass channel out when configuring overlays

dispc_ovl_setup_common() is to be used by both overlays and writeback. We pass
channel out to figure out what manager the overlay is connected to, to determine
the pixel clock rate. This is used to decide the scaling limitations for that
overlay.

writeback doesn't have a channel out, it has a channel in field which tells
where writeback gets its input from. These are 2 different fields, and this
prevents us reusing the overlay configuration code for writeback.

To overcome this, we now pass omap_plane to overlay related functions rather
than passing channel out. We create helper functions which can derive pclk/lclk
from the omap_plane id.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 110 +++++++++++++++++++++++-----------------
 1 file changed, 64 insertions(+), 46 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 9c23ce8aed49..d65568929ac8 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -86,13 +86,13 @@ struct dispc_features {
 	u16 sw_max;
 	u16 vp_max;
 	u16 hp_max;
-	int (*calc_scaling) (enum omap_channel channel,
+	int (*calc_scaling) (enum omap_plane plane,
 		const struct omap_video_timings *mgr_timings,
 		u16 width, u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode, bool *five_taps,
 		int *x_predecim, int *y_predecim, int *decim_x, int *decim_y,
 		u16 pos_x, unsigned long *core_clk);
-	unsigned long (*calc_core_clk) (enum omap_channel channel,
+	unsigned long (*calc_core_clk) (enum omap_plane plane,
 		u16 width, u16 height, u16 out_width, u16 out_height);
 	u8 num_fifos;
 
@@ -236,6 +236,8 @@ static const struct {
 };
 
 static void _omap_dispc_set_irqs(void);
+static unsigned long dispc_plane_pclk_rate(enum omap_plane plane);
+static unsigned long dispc_plane_lclk_rate(enum omap_plane plane);
 
 static inline void dispc_write_reg(const u16 idx, u32 val)
 {
@@ -1919,22 +1921,19 @@ static void calc_tiler_rotation_offset(u16 screen_width, u16 width,
  * This function is used to avoid synclosts in OMAP3, because of some
  * undocumented horizontal position and timing related limitations.
  */
-static int check_horiz_timing_omap3(enum omap_channel channel,
+static int check_horiz_timing_omap3(enum omap_plane plane,
 		const struct omap_video_timings *t, u16 pos_x,
 		u16 width, u16 height, u16 out_width, u16 out_height)
 {
 	int DS = DIV_ROUND_UP(height, out_height);
-	unsigned long nonactive, lclk, pclk;
+	unsigned long nonactive;
 	static const u8 limits[3] = { 8, 10, 20 };
 	u64 val, blank;
+	unsigned long pclk = dispc_plane_pclk_rate(plane);
+	unsigned long lclk = dispc_plane_lclk_rate(plane);
 	int i;
 
 	nonactive = t->x_res + t->hfp + t->hsw + t->hbp - out_width;
-	pclk = dispc_mgr_pclk_rate(channel);
-	if (dss_mgr_is_lcd(channel))
-		lclk = dispc_mgr_lclk_rate(channel);
-	else
-		lclk = dispc_fclk_rate();
 
 	i = 0;
 	if (out_height < height)
@@ -1971,13 +1970,14 @@ static int check_horiz_timing_omap3(enum omap_channel channel,
 	return 0;
 }
 
-static unsigned long calc_core_clk_five_taps(enum omap_channel channel,
+static unsigned long calc_core_clk_five_taps(enum omap_plane plane,
 		const struct omap_video_timings *mgr_timings, u16 width,
 		u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode)
 {
 	u32 core_clk = 0;
-	u64 tmp, pclk = dispc_mgr_pclk_rate(channel);
+	u64 tmp;
+	unsigned long pclk = dispc_plane_pclk_rate(plane);
 
 	if (height <= out_height && width <= out_width)
 		return (unsigned long) pclk;
@@ -2011,10 +2011,10 @@ static unsigned long calc_core_clk_five_taps(enum omap_channel channel,
 	return core_clk;
 }
 
-static unsigned long calc_core_clk_24xx(enum omap_channel channel, u16 width,
+static unsigned long calc_core_clk_24xx(enum omap_plane plane, u16 width,
 		u16 height, u16 out_width, u16 out_height)
 {
-	unsigned long pclk = dispc_mgr_pclk_rate(channel);
+	unsigned long pclk = dispc_plane_pclk_rate(plane);
 
 	if (height > out_height && width > out_width)
 		return pclk * 4;
@@ -2022,11 +2022,11 @@ static unsigned long calc_core_clk_24xx(enum omap_channel channel, u16 width,
 		return pclk * 2;
 }
 
-static unsigned long calc_core_clk_34xx(enum omap_channel channel, u16 width,
+static unsigned long calc_core_clk_34xx(enum omap_plane plane, u16 width,
 		u16 height, u16 out_width, u16 out_height)
 {
 	unsigned int hf, vf;
-	unsigned long pclk = dispc_mgr_pclk_rate(channel);
+	unsigned long pclk = dispc_plane_pclk_rate(plane);
 
 	/*
 	 * FIXME how to determine the 'A' factor
@@ -2049,10 +2049,10 @@ static unsigned long calc_core_clk_34xx(enum omap_channel channel, u16 width,
 	return pclk * vf * hf;
 }
 
-static unsigned long calc_core_clk_44xx(enum omap_channel channel, u16 width,
+static unsigned long calc_core_clk_44xx(enum omap_plane plane, u16 width,
 		u16 height, u16 out_width, u16 out_height)
 {
-	unsigned long pclk = dispc_mgr_pclk_rate(channel);
+	unsigned long pclk = dispc_plane_pclk_rate(plane);
 
 	if (width > out_width)
 		return DIV_ROUND_UP(pclk, out_width) * width;
@@ -2060,7 +2060,7 @@ static unsigned long calc_core_clk_44xx(enum omap_channel channel, u16 width,
 		return pclk;
 }
 
-static int dispc_ovl_calc_scaling_24xx(enum omap_channel channel,
+static int dispc_ovl_calc_scaling_24xx(enum omap_plane plane,
 		const struct omap_video_timings *mgr_timings,
 		u16 width, u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode, bool *five_taps,
@@ -2072,12 +2072,13 @@ static int dispc_ovl_calc_scaling_24xx(enum omap_channel channel,
 	int min_factor = min(*decim_x, *decim_y);
 	const int maxsinglelinewidth =
 			dss_feat_get_param_max(FEAT_PARAM_LINEWIDTH);
+
 	*five_taps = false;
 
 	do {
 		in_height = DIV_ROUND_UP(height, *decim_y);
 		in_width = DIV_ROUND_UP(width, *decim_x);
-		*core_clk = dispc.feat->calc_core_clk(channel, in_width,
+		*core_clk = dispc.feat->calc_core_clk(plane, in_width,
 				in_height, out_width, out_height);
 		error = (in_width > maxsinglelinewidth || !*core_clk ||
 			*core_clk > dispc_core_clk_rate());
@@ -2100,7 +2101,7 @@ static int dispc_ovl_calc_scaling_24xx(enum omap_channel channel,
 	return 0;
 }
 
-static int dispc_ovl_calc_scaling_34xx(enum omap_channel channel,
+static int dispc_ovl_calc_scaling_34xx(enum omap_plane plane,
 		const struct omap_video_timings *mgr_timings,
 		u16 width, u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode, bool *five_taps,
@@ -2116,18 +2117,19 @@ static int dispc_ovl_calc_scaling_34xx(enum omap_channel channel,
 	do {
 		in_height = DIV_ROUND_UP(height, *decim_y);
 		in_width = DIV_ROUND_UP(width, *decim_x);
-		*core_clk = calc_core_clk_five_taps(channel, mgr_timings,
+		*core_clk = calc_core_clk_five_taps(plane, mgr_timings,
 			in_width, in_height, out_width, out_height, color_mode);
 
-		error = check_horiz_timing_omap3(channel, mgr_timings, pos_x,
-			in_width, in_height, out_width, out_height);
+		error = check_horiz_timing_omap3(plane, mgr_timings,
+				pos_x, in_width, in_height, out_width,
+				out_height);
 
 		if (in_width > maxsinglelinewidth)
 			if (in_height > out_height &&
 						in_height < out_height * 2)
 				*five_taps = false;
 		if (!*five_taps)
-			*core_clk = dispc.feat->calc_core_clk(channel, in_width,
+			*core_clk = dispc.feat->calc_core_clk(plane, in_width,
 					in_height, out_width, out_height);
 
 		error = (error || in_width > maxsinglelinewidth * 2 ||
@@ -2145,7 +2147,7 @@ static int dispc_ovl_calc_scaling_34xx(enum omap_channel channel,
 		}
 	} while (*decim_x <= *x_predecim && *decim_y <= *y_predecim && error);
 
-	if (check_horiz_timing_omap3(channel, mgr_timings, pos_x, width, height,
+	if (check_horiz_timing_omap3(plane, mgr_timings, pos_x, width, height,
 		out_width, out_height)){
 			DSSERR("horizontal timing too tight\n");
 			return -EINVAL;
@@ -2164,7 +2166,7 @@ static int dispc_ovl_calc_scaling_34xx(enum omap_channel channel,
 	return 0;
 }
 
-static int dispc_ovl_calc_scaling_44xx(enum omap_channel channel,
+static int dispc_ovl_calc_scaling_44xx(enum omap_plane plane,
 		const struct omap_video_timings *mgr_timings,
 		u16 width, u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode, bool *five_taps,
@@ -2176,9 +2178,10 @@ static int dispc_ovl_calc_scaling_44xx(enum omap_channel channel,
 	u16 in_height = DIV_ROUND_UP(height, *decim_y);
 	const int maxsinglelinewidth =
 				dss_feat_get_param_max(FEAT_PARAM_LINEWIDTH);
+	unsigned long pclk = dispc_plane_pclk_rate(plane);
+
+	in_width_max = dispc_core_clk_rate() / DIV_ROUND_UP(pclk, out_width);
 
-	in_width_max = dispc_core_clk_rate() /
-			DIV_ROUND_UP(dispc_mgr_pclk_rate(channel), out_width);
 	*decim_x = DIV_ROUND_UP(width, in_width_max);
 
 	*decim_x = *decim_x > decim_x_min ? *decim_x : decim_x_min;
@@ -2195,13 +2198,13 @@ static int dispc_ovl_calc_scaling_44xx(enum omap_channel channel,
 		return -EINVAL;
 	}
 
-	*core_clk = dispc.feat->calc_core_clk(channel, in_width, in_height,
+	*core_clk = dispc.feat->calc_core_clk(plane, in_width, in_height,
 				out_width, out_height);
 	return 0;
 }
 
 static int dispc_ovl_calc_scaling(enum omap_plane plane,
-		enum omap_overlay_caps caps, enum omap_channel channel,
+		enum omap_overlay_caps caps,
 		const struct omap_video_timings *mgr_timings,
 		u16 width, u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode, bool *five_taps,
@@ -2242,9 +2245,9 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 	if (decim_y > *y_predecim || out_height > height * 8)
 		return -EINVAL;
 
-	ret = dispc.feat->calc_scaling(channel, mgr_timings, width, height,
-		out_width, out_height, color_mode, five_taps, x_predecim,
-		y_predecim, &decim_x, &decim_y, pos_x, &core_clk);
+	ret = dispc.feat->calc_scaling(plane, mgr_timings, width, height,
+		out_width, out_height, color_mode, five_taps,
+		x_predecim, y_predecim, &decim_x, &decim_y, pos_x, &core_clk);
 	if (ret)
 		return ret;
 
@@ -2265,12 +2268,11 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 }
 
 static int dispc_ovl_setup_common(enum omap_plane plane,
-		enum omap_channel channel, enum omap_overlay_caps caps,
-		u32 paddr, u32 p_uv_addr, u16 screen_width, int pos_x,
-		int pos_y, u16 width, u16 height, u16 out_width, u16 out_height,
-		enum omap_color_mode color_mode, u8 rotation, bool mirror,
-		u8 zorder, u8 pre_mult_alpha, u8 global_alpha,
-		enum omap_dss_rotation_type rotation_type,
+		enum omap_overlay_caps caps, u32 paddr, u32 p_uv_addr,
+		u16 screen_width, int pos_x, int pos_y, u16 width, u16 height,
+		u16 out_width, u16 out_height, enum omap_color_mode color_mode,
+		u8 rotation, bool mirror, u8 zorder, u8 pre_mult_alpha,
+		u8 global_alpha, enum omap_dss_rotation_type rotation_type,
 		bool replication, const struct omap_video_timings *mgr_timings)
 {
 	bool five_taps = true;
@@ -2309,7 +2311,7 @@ static int dispc_ovl_setup_common(enum omap_plane plane,
 	if (!dss_feat_color_mode_supported(plane, color_mode))
 		return -EINVAL;
 
-	r = dispc_ovl_calc_scaling(plane, caps, channel, mgr_timings, in_width,
+	r = dispc_ovl_calc_scaling(plane, caps, mgr_timings, in_width,
 			in_height, out_width, out_height, color_mode,
 			&five_taps, &x_predecim, &y_predecim, pos_x,
 			rotation_type);
@@ -2424,12 +2426,11 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 		oi->pos_y, oi->width, oi->height, oi->out_width, oi->out_height,
 		oi->color_mode, oi->rotation, oi->mirror, channel, replication);
 
-	r = dispc_ovl_setup_common(plane, channel, ovl->caps, oi->paddr,
-		oi->p_uv_addr, oi->screen_width, oi->pos_x, oi->pos_y,
-		oi->width, oi->height, oi->out_width, oi->out_height,
-		oi->color_mode, oi->rotation, oi->mirror, oi->zorder,
-		oi->pre_mult_alpha, oi->global_alpha, oi->rotation_type,
-		replication, mgr_timings);
+	r = dispc_ovl_setup_common(plane, ovl->caps, oi->paddr, oi->p_uv_addr,
+		oi->screen_width, oi->pos_x, oi->pos_y, oi->width, oi->height,
+		oi->out_width, oi->out_height, oi->color_mode, oi->rotation,
+		oi->mirror, oi->zorder, oi->pre_mult_alpha, oi->global_alpha,
+		oi->rotation_type, replication, mgr_timings);
 
 	return r;
 }
@@ -2989,6 +2990,23 @@ unsigned long dispc_core_clk_rate(void)
 	return fclk / lcd;
 }
 
+static unsigned long dispc_plane_pclk_rate(enum omap_plane plane)
+{
+	enum omap_channel channel = dispc_ovl_get_channel_out(plane);
+
+	return dispc_mgr_pclk_rate(channel);
+}
+
+static unsigned long dispc_plane_lclk_rate(enum omap_plane plane)
+{
+	enum omap_channel channel = dispc_ovl_get_channel_out(plane);
+
+	if (dss_mgr_is_lcd(channel))
+		return dispc_mgr_lclk_rate(channel);
+	else
+		return dispc_fclk_rate();
+
+}
 static void dispc_dump_clocks_channel(struct seq_file *s, enum omap_channel channel)
 {
 	int lcd, pcd;
-- 
cgit v1.2.1


From 8ba85306ba0fd87a3c15a02fe83d817832705a7d Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Wed, 26 Sep 2012 17:00:37 +0530
Subject: OMAPDSS: DIPSC: Relax scaling limitations when in memory to memory
 mode

The scalers of overlays and writeback do not have any constraints on downscale
ratio when operating in memory to memory mode.

This is because in memory to memory mode, we aren't connected to a display which
needs data output at the rate of pixel clock. The scalers can perform as much
downscaling as needed, the rate at which the scaler outputs is adjusted
accordingly.

Relax constraints related to downscaling based on whether the input overlays are
connected to writeback in memory to memory mode. We pass a mem_to_mem boolean
parameter to dispc_ovl_setup() from APPLY. This is currently set to false, this
will later be configured to the correct value based on whether the overlay is
connected to writeback or not. Do the same later for writeback when writeback is
configured.

In the scaling calculation code, we calculate the minimum amount of core clock we
need to achieve the required downscaling. If we are in memory to memory mode, we
set this to a very small value(1 in this case), this value would always be
lesser than the actual DISPC core clock value, and hence the scaling checks
would succeed.

We take care that pixel clock isn't calculated for writeback and the overlays
connected to it when in memory to memory mode. A pixel clock in such cases
doesn't make sense.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/apply.c |  2 +-
 drivers/video/omap2/dss/dispc.c | 59 ++++++++++++++++++++++++++++-------------
 drivers/video/omap2/dss/dss.h   |  3 ++-
 3 files changed, 43 insertions(+), 21 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 2b1fa851a8b9..19d66f471b4b 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -584,7 +584,7 @@ static void dss_ovl_write_regs(struct omap_overlay *ovl)
 
 	replication = dss_ovl_use_replication(mp->lcd_config, oi->color_mode);
 
-	r = dispc_ovl_setup(ovl->id, oi, replication, &mp->timings);
+	r = dispc_ovl_setup(ovl->id, oi, replication, &mp->timings, false);
 	if (r) {
 		/*
 		 * We can't do much here, as this function can be called from
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index d65568929ac8..fd932b83ce43 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -91,9 +91,10 @@ struct dispc_features {
 		u16 width, u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode, bool *five_taps,
 		int *x_predecim, int *y_predecim, int *decim_x, int *decim_y,
-		u16 pos_x, unsigned long *core_clk);
+		u16 pos_x, unsigned long *core_clk, bool mem_to_mem);
 	unsigned long (*calc_core_clk) (enum omap_plane plane,
-		u16 width, u16 height, u16 out_width, u16 out_height);
+		u16 width, u16 height, u16 out_width, u16 out_height,
+		bool mem_to_mem);
 	u8 num_fifos;
 
 	/* swap GFX & WB fifos */
@@ -2012,7 +2013,7 @@ static unsigned long calc_core_clk_five_taps(enum omap_plane plane,
 }
 
 static unsigned long calc_core_clk_24xx(enum omap_plane plane, u16 width,
-		u16 height, u16 out_width, u16 out_height)
+		u16 height, u16 out_width, u16 out_height, bool mem_to_mem)
 {
 	unsigned long pclk = dispc_plane_pclk_rate(plane);
 
@@ -2023,7 +2024,7 @@ static unsigned long calc_core_clk_24xx(enum omap_plane plane, u16 width,
 }
 
 static unsigned long calc_core_clk_34xx(enum omap_plane plane, u16 width,
-		u16 height, u16 out_width, u16 out_height)
+		u16 height, u16 out_width, u16 out_height, bool mem_to_mem)
 {
 	unsigned int hf, vf;
 	unsigned long pclk = dispc_plane_pclk_rate(plane);
@@ -2050,9 +2051,20 @@ static unsigned long calc_core_clk_34xx(enum omap_plane plane, u16 width,
 }
 
 static unsigned long calc_core_clk_44xx(enum omap_plane plane, u16 width,
-		u16 height, u16 out_width, u16 out_height)
+		u16 height, u16 out_width, u16 out_height, bool mem_to_mem)
 {
-	unsigned long pclk = dispc_plane_pclk_rate(plane);
+	unsigned long pclk;
+
+	/*
+	 * If the overlay/writeback is in mem to mem mode, there are no
+	 * downscaling limitations with respect to pixel clock, return 1 as
+	 * required core clock to represent that we have sufficient enough
+	 * core clock to do maximum downscaling
+	 */
+	if (mem_to_mem)
+		return 1;
+
+	pclk = dispc_plane_pclk_rate(plane);
 
 	if (width > out_width)
 		return DIV_ROUND_UP(pclk, out_width) * width;
@@ -2065,7 +2077,7 @@ static int dispc_ovl_calc_scaling_24xx(enum omap_plane plane,
 		u16 width, u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode, bool *five_taps,
 		int *x_predecim, int *y_predecim, int *decim_x, int *decim_y,
-		u16 pos_x, unsigned long *core_clk)
+		u16 pos_x, unsigned long *core_clk, bool mem_to_mem)
 {
 	int error;
 	u16 in_width, in_height;
@@ -2079,7 +2091,7 @@ static int dispc_ovl_calc_scaling_24xx(enum omap_plane plane,
 		in_height = DIV_ROUND_UP(height, *decim_y);
 		in_width = DIV_ROUND_UP(width, *decim_x);
 		*core_clk = dispc.feat->calc_core_clk(plane, in_width,
-				in_height, out_width, out_height);
+				in_height, out_width, out_height, mem_to_mem);
 		error = (in_width > maxsinglelinewidth || !*core_clk ||
 			*core_clk > dispc_core_clk_rate());
 		if (error) {
@@ -2106,7 +2118,7 @@ static int dispc_ovl_calc_scaling_34xx(enum omap_plane plane,
 		u16 width, u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode, bool *five_taps,
 		int *x_predecim, int *y_predecim, int *decim_x, int *decim_y,
-		u16 pos_x, unsigned long *core_clk)
+		u16 pos_x, unsigned long *core_clk, bool mem_to_mem)
 {
 	int error;
 	u16 in_width, in_height;
@@ -2130,7 +2142,8 @@ static int dispc_ovl_calc_scaling_34xx(enum omap_plane plane,
 				*five_taps = false;
 		if (!*five_taps)
 			*core_clk = dispc.feat->calc_core_clk(plane, in_width,
-					in_height, out_width, out_height);
+					in_height, out_width, out_height,
+					mem_to_mem);
 
 		error = (error || in_width > maxsinglelinewidth * 2 ||
 			(in_width > maxsinglelinewidth && *five_taps) ||
@@ -2171,7 +2184,7 @@ static int dispc_ovl_calc_scaling_44xx(enum omap_plane plane,
 		u16 width, u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode, bool *five_taps,
 		int *x_predecim, int *y_predecim, int *decim_x, int *decim_y,
-		u16 pos_x, unsigned long *core_clk)
+		u16 pos_x, unsigned long *core_clk, bool mem_to_mem)
 {
 	u16 in_width, in_width_max;
 	int decim_x_min = *decim_x;
@@ -2179,8 +2192,13 @@ static int dispc_ovl_calc_scaling_44xx(enum omap_plane plane,
 	const int maxsinglelinewidth =
 				dss_feat_get_param_max(FEAT_PARAM_LINEWIDTH);
 	unsigned long pclk = dispc_plane_pclk_rate(plane);
+	const int maxdownscale = dss_feat_get_param_max(FEAT_PARAM_DOWNSCALE);
 
-	in_width_max = dispc_core_clk_rate() / DIV_ROUND_UP(pclk, out_width);
+	if (mem_to_mem)
+		in_width_max = DIV_ROUND_UP(out_width, maxdownscale);
+	else
+		in_width_max = dispc_core_clk_rate() /
+					DIV_ROUND_UP(pclk, out_width);
 
 	*decim_x = DIV_ROUND_UP(width, in_width_max);
 
@@ -2199,7 +2217,7 @@ static int dispc_ovl_calc_scaling_44xx(enum omap_plane plane,
 	}
 
 	*core_clk = dispc.feat->calc_core_clk(plane, in_width, in_height,
-				out_width, out_height);
+				out_width, out_height, mem_to_mem);
 	return 0;
 }
 
@@ -2209,7 +2227,7 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 		u16 width, u16 height, u16 out_width, u16 out_height,
 		enum omap_color_mode color_mode, bool *five_taps,
 		int *x_predecim, int *y_predecim, u16 pos_x,
-		enum omap_dss_rotation_type rotation_type)
+		enum omap_dss_rotation_type rotation_type, bool mem_to_mem)
 {
 	const int maxdownscale = dss_feat_get_param_max(FEAT_PARAM_DOWNSCALE);
 	const int max_decim_limit = 16;
@@ -2247,7 +2265,8 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 
 	ret = dispc.feat->calc_scaling(plane, mgr_timings, width, height,
 		out_width, out_height, color_mode, five_taps,
-		x_predecim, y_predecim, &decim_x, &decim_y, pos_x, &core_clk);
+		x_predecim, y_predecim, &decim_x, &decim_y, pos_x, &core_clk,
+		mem_to_mem);
 	if (ret)
 		return ret;
 
@@ -2273,7 +2292,8 @@ static int dispc_ovl_setup_common(enum omap_plane plane,
 		u16 out_width, u16 out_height, enum omap_color_mode color_mode,
 		u8 rotation, bool mirror, u8 zorder, u8 pre_mult_alpha,
 		u8 global_alpha, enum omap_dss_rotation_type rotation_type,
-		bool replication, const struct omap_video_timings *mgr_timings)
+		bool replication, const struct omap_video_timings *mgr_timings,
+		bool mem_to_mem)
 {
 	bool five_taps = true;
 	bool fieldmode = 0;
@@ -2314,7 +2334,7 @@ static int dispc_ovl_setup_common(enum omap_plane plane,
 	r = dispc_ovl_calc_scaling(plane, caps, mgr_timings, in_width,
 			in_height, out_width, out_height, color_mode,
 			&five_taps, &x_predecim, &y_predecim, pos_x,
-			rotation_type);
+			rotation_type, mem_to_mem);
 	if (r)
 		return r;
 
@@ -2412,7 +2432,8 @@ static int dispc_ovl_setup_common(enum omap_plane plane,
 }
 
 int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
-		bool replication, const struct omap_video_timings *mgr_timings)
+		bool replication, const struct omap_video_timings *mgr_timings,
+		bool mem_to_mem)
 {
 	int r;
 	struct omap_overlay *ovl = omap_dss_get_overlay(plane);
@@ -2430,7 +2451,7 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 		oi->screen_width, oi->pos_x, oi->pos_y, oi->width, oi->height,
 		oi->out_width, oi->out_height, oi->color_mode, oi->rotation,
 		oi->mirror, oi->zorder, oi->pre_mult_alpha, oi->global_alpha,
-		oi->rotation_type, replication, mgr_timings);
+		oi->rotation_type, replication, mgr_timings, mem_to_mem);
 
 	return r;
 }
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index e71a6f16fc4d..322a2be7b4c6 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -445,7 +445,8 @@ void dispc_ovl_compute_fifo_thresholds(enum omap_plane plane,
 		u32 *fifo_low, u32 *fifo_high, bool use_fifomerge,
 		bool manual_update);
 int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
-		bool replication, const struct omap_video_timings *mgr_timings);
+		bool replication, const struct omap_video_timings *mgr_timings,
+		bool mem_to_mem);
 int dispc_ovl_enable(enum omap_plane plane, bool enable);
 void dispc_ovl_set_channel_out(enum omap_plane plane,
 		enum omap_channel channel);
-- 
cgit v1.2.1


From 20fbb50be4ff22b443183ffb4b5e6dd0691a4fc1 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Wed, 22 Aug 2012 17:04:48 +0530
Subject: OMAPDSS: DISPC: Allow both upscaling and downscaling of chroma

In the function dispc_plane_set_scaling_uv(), create a parameter which tells if
we want to upscale or downscale the chroma plane.

Downscaling of chroma is required by writeback pipeline for converting the input
YUV444 color format to YUV422 or NV12.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index fd932b83ce43..b1b9e3f1be90 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1457,6 +1457,7 @@ static void dispc_ovl_set_scaling_uv(enum omap_plane plane,
 {
 	int scale_x = out_width != orig_width;
 	int scale_y = out_height != orig_height;
+	bool chroma_upscale = true;
 
 	if (!dss_has_feature(FEAT_HANDLE_UV_SEPARATE))
 		return;
@@ -1473,23 +1474,34 @@ static void dispc_ovl_set_scaling_uv(enum omap_plane plane,
 
 	switch (color_mode) {
 	case OMAP_DSS_COLOR_NV12:
-		/* UV is subsampled by 2 vertically*/
-		orig_height >>= 1;
-		/* UV is subsampled by 2 horz.*/
-		orig_width >>= 1;
+		if (chroma_upscale) {
+			/* UV is subsampled by 2 horizontally and vertically */
+			orig_height >>= 1;
+			orig_width >>= 1;
+		} else {
+			/* UV is downsampled by 2 horizontally and vertically */
+			orig_height <<= 1;
+			orig_width <<= 1;
+		}
+
 		break;
 	case OMAP_DSS_COLOR_YUV2:
 	case OMAP_DSS_COLOR_UYVY:
-		/*For YUV422 with 90/270 rotation,
-		 *we don't upsample chroma
-		 */
+		/* For YUV422 with 90/270 rotation, we don't upsample chroma */
 		if (rotation == OMAP_DSS_ROT_0 ||
-			rotation == OMAP_DSS_ROT_180)
-			/* UV is subsampled by 2 hrz*/
-			orig_width >>= 1;
+				rotation == OMAP_DSS_ROT_180) {
+			if (chroma_upscale)
+				/* UV is subsampled by 2 horizontally */
+				orig_width >>= 1;
+			else
+				/* UV is downsampled by 2 horizontally */
+				orig_width <<= 1;
+		}
+
 		/* must use FIR for YUV422 if rotated */
 		if (rotation != OMAP_DSS_ROT_0)
 			scale_x = scale_y = true;
+
 		break;
 	default:
 		BUG();
-- 
cgit v1.2.1


From 7a155be39e95fa4bf61bdc4c4456316a52421185 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 16 Jul 2012 15:54:24 +0530
Subject: OMAPDSS: DISPC: Add writeback register offsets and dss features
 structs

Since writeback has many overlay like properties, and most of it's registers are
similar to that of overlays, it's possible to reuse most of the overlay related
DISPC code for writeback when considering it as a plane. Writeback was added as
a plane in the omap_plane field as OMAP_DSS_WB.

Add the writeback register offsets in dispc.h, add minimal WB plane related info
needed in dss_features. Add a function which returns the number of writeback
pipelines an OMAP version has.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.h        | 33 +++++++++++++++++++++++++++++++++
 drivers/video/omap2/dss/dss_features.c | 19 +++++++++++++++++++
 drivers/video/omap2/dss/dss_features.h |  1 +
 3 files changed, 53 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.h b/drivers/video/omap2/dss/dispc.h
index 42e56cc7cdbc..222363c6e623 100644
--- a/drivers/video/omap2/dss/dispc.h
+++ b/drivers/video/omap2/dss/dispc.h
@@ -373,6 +373,7 @@ static inline u16 DISPC_BA0_OFFSET(enum omap_plane plane)
 	case OMAP_DSS_VIDEO2:
 		return 0x0000;
 	case OMAP_DSS_VIDEO3:
+	case OMAP_DSS_WB:
 		return 0x0008;
 	default:
 		BUG();
@@ -388,6 +389,7 @@ static inline u16 DISPC_BA1_OFFSET(enum omap_plane plane)
 	case OMAP_DSS_VIDEO2:
 		return 0x0004;
 	case OMAP_DSS_VIDEO3:
+	case OMAP_DSS_WB:
 		return 0x000C;
 	default:
 		BUG();
@@ -407,6 +409,8 @@ static inline u16 DISPC_BA0_UV_OFFSET(enum omap_plane plane)
 		return 0x04BC;
 	case OMAP_DSS_VIDEO3:
 		return 0x0310;
+	case OMAP_DSS_WB:
+		return 0x0118;
 	default:
 		BUG();
 		return 0;
@@ -425,6 +429,8 @@ static inline u16 DISPC_BA1_UV_OFFSET(enum omap_plane plane)
 		return 0x04C0;
 	case OMAP_DSS_VIDEO3:
 		return 0x0314;
+	case OMAP_DSS_WB:
+		return 0x011C;
 	default:
 		BUG();
 		return 0;
@@ -454,6 +460,7 @@ static inline u16 DISPC_SIZE_OFFSET(enum omap_plane plane)
 	case OMAP_DSS_VIDEO2:
 		return 0x000C;
 	case OMAP_DSS_VIDEO3:
+	case OMAP_DSS_WB:
 		return 0x00A8;
 	default:
 		BUG();
@@ -470,6 +477,7 @@ static inline u16 DISPC_ATTR_OFFSET(enum omap_plane plane)
 	case OMAP_DSS_VIDEO2:
 		return 0x0010;
 	case OMAP_DSS_VIDEO3:
+	case OMAP_DSS_WB:
 		return 0x0070;
 	default:
 		BUG();
@@ -489,6 +497,8 @@ static inline u16 DISPC_ATTR2_OFFSET(enum omap_plane plane)
 		return 0x04DC;
 	case OMAP_DSS_VIDEO3:
 		return 0x032C;
+	case OMAP_DSS_WB:
+		return 0x0310;
 	default:
 		BUG();
 		return 0;
@@ -504,6 +514,7 @@ static inline u16 DISPC_FIFO_THRESH_OFFSET(enum omap_plane plane)
 	case OMAP_DSS_VIDEO2:
 		return 0x0014;
 	case OMAP_DSS_VIDEO3:
+	case OMAP_DSS_WB:
 		return 0x008C;
 	default:
 		BUG();
@@ -537,6 +548,7 @@ static inline u16 DISPC_ROW_INC_OFFSET(enum omap_plane plane)
 	case OMAP_DSS_VIDEO2:
 		return 0x001C;
 	case OMAP_DSS_VIDEO3:
+	case OMAP_DSS_WB:
 		return 0x00A4;
 	default:
 		BUG();
@@ -553,6 +565,7 @@ static inline u16 DISPC_PIX_INC_OFFSET(enum omap_plane plane)
 	case OMAP_DSS_VIDEO2:
 		return 0x0020;
 	case OMAP_DSS_VIDEO3:
+	case OMAP_DSS_WB:
 		return 0x0098;
 	default:
 		BUG();
@@ -602,6 +615,7 @@ static inline u16 DISPC_FIR_OFFSET(enum omap_plane plane)
 	case OMAP_DSS_VIDEO2:
 		return 0x0024;
 	case OMAP_DSS_VIDEO3:
+	case OMAP_DSS_WB:
 		return 0x0090;
 	default:
 		BUG();
@@ -621,6 +635,8 @@ static inline u16 DISPC_FIR2_OFFSET(enum omap_plane plane)
 		return 0x055C;
 	case OMAP_DSS_VIDEO3:
 		return 0x0424;
+	case OMAP_DSS_WB:
+		return 0x290;
 	default:
 		BUG();
 		return 0;
@@ -637,6 +653,7 @@ static inline u16 DISPC_PIC_SIZE_OFFSET(enum omap_plane plane)
 	case OMAP_DSS_VIDEO2:
 		return 0x0028;
 	case OMAP_DSS_VIDEO3:
+	case OMAP_DSS_WB:
 		return 0x0094;
 	default:
 		BUG();
@@ -655,6 +672,7 @@ static inline u16 DISPC_ACCU0_OFFSET(enum omap_plane plane)
 	case OMAP_DSS_VIDEO2:
 		return 0x002C;
 	case OMAP_DSS_VIDEO3:
+	case OMAP_DSS_WB:
 		return 0x0000;
 	default:
 		BUG();
@@ -674,6 +692,8 @@ static inline u16 DISPC_ACCU2_0_OFFSET(enum omap_plane plane)
 		return 0x0560;
 	case OMAP_DSS_VIDEO3:
 		return 0x0428;
+	case OMAP_DSS_WB:
+		return 0x0294;
 	default:
 		BUG();
 		return 0;
@@ -690,6 +710,7 @@ static inline u16 DISPC_ACCU1_OFFSET(enum omap_plane plane)
 	case OMAP_DSS_VIDEO2:
 		return 0x0030;
 	case OMAP_DSS_VIDEO3:
+	case OMAP_DSS_WB:
 		return 0x0004;
 	default:
 		BUG();
@@ -709,6 +730,8 @@ static inline u16 DISPC_ACCU2_1_OFFSET(enum omap_plane plane)
 		return 0x0564;
 	case OMAP_DSS_VIDEO3:
 		return 0x042C;
+	case OMAP_DSS_WB:
+		return 0x0298;
 	default:
 		BUG();
 		return 0;
@@ -726,6 +749,7 @@ static inline u16 DISPC_FIR_COEF_H_OFFSET(enum omap_plane plane, u16 i)
 	case OMAP_DSS_VIDEO2:
 		return 0x0034 + i * 0x8;
 	case OMAP_DSS_VIDEO3:
+	case OMAP_DSS_WB:
 		return 0x0010 + i * 0x8;
 	default:
 		BUG();
@@ -746,6 +770,8 @@ static inline u16 DISPC_FIR_COEF_H2_OFFSET(enum omap_plane plane, u16 i)
 		return 0x0568 + i * 0x8;
 	case OMAP_DSS_VIDEO3:
 		return 0x0430 + i * 0x8;
+	case OMAP_DSS_WB:
+		return 0x02A0 + i * 0x8;
 	default:
 		BUG();
 		return 0;
@@ -763,6 +789,7 @@ static inline u16 DISPC_FIR_COEF_HV_OFFSET(enum omap_plane plane, u16 i)
 	case OMAP_DSS_VIDEO2:
 		return 0x0038 + i * 0x8;
 	case OMAP_DSS_VIDEO3:
+	case OMAP_DSS_WB:
 		return 0x0014 + i * 0x8;
 	default:
 		BUG();
@@ -783,6 +810,8 @@ static inline u16 DISPC_FIR_COEF_HV2_OFFSET(enum omap_plane plane, u16 i)
 		return 0x056C + i * 0x8;
 	case OMAP_DSS_VIDEO3:
 		return 0x0434 + i * 0x8;
+	case OMAP_DSS_WB:
+		return 0x02A4 + i * 0x8;
 	default:
 		BUG();
 		return 0;
@@ -799,6 +828,7 @@ static inline u16 DISPC_CONV_COEF_OFFSET(enum omap_plane plane, u16 i)
 	case OMAP_DSS_VIDEO1:
 	case OMAP_DSS_VIDEO2:
 	case OMAP_DSS_VIDEO3:
+	case OMAP_DSS_WB:
 		return 0x0074 + i * 0x4;
 	default:
 		BUG();
@@ -818,6 +848,7 @@ static inline u16 DISPC_FIR_COEF_V_OFFSET(enum omap_plane plane, u16 i)
 	case OMAP_DSS_VIDEO2:
 		return 0x00B4 + i * 0x4;
 	case OMAP_DSS_VIDEO3:
+	case OMAP_DSS_WB:
 		return 0x0050 + i * 0x4;
 	default:
 		BUG();
@@ -838,6 +869,8 @@ static inline u16 DISPC_FIR_COEF_V2_OFFSET(enum omap_plane plane, u16 i)
 		return 0x05A8 + i * 0x4;
 	case OMAP_DSS_VIDEO3:
 		return 0x0470 + i * 0x4;
+	case OMAP_DSS_WB:
+		return 0x02E0 + i * 0x4;
 	default:
 		BUG();
 		return 0;
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 5a5c25b134b1..acbc1e1efba3 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -46,6 +46,7 @@ struct omap_dss_features {
 
 	const int num_mgrs;
 	const int num_ovls;
+	const int num_wbs;
 	const enum omap_display_type *supported_displays;
 	const enum omap_dss_output_id *supported_outputs;
 	const enum omap_color_mode *supported_color_modes;
@@ -310,6 +311,16 @@ static const enum omap_color_mode omap4_dss_supported_color_modes[] = {
 	OMAP_DSS_COLOR_ARGB16 | OMAP_DSS_COLOR_XRGB16_1555 |
 	OMAP_DSS_COLOR_ARGB32 | OMAP_DSS_COLOR_RGBX16 |
 	OMAP_DSS_COLOR_RGBX32,
+
+	/* OMAP_DSS_WB */
+	OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB12U |
+	OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_ARGB16_1555 |
+	OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_NV12 |
+	OMAP_DSS_COLOR_RGBA16 | OMAP_DSS_COLOR_RGB24U |
+	OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_UYVY |
+	OMAP_DSS_COLOR_ARGB16 | OMAP_DSS_COLOR_XRGB16_1555 |
+	OMAP_DSS_COLOR_ARGB32 | OMAP_DSS_COLOR_RGBX16 |
+	OMAP_DSS_COLOR_RGBX32,
 };
 
 static const enum omap_overlay_caps omap2_dss_overlay_caps[] = {
@@ -710,6 +721,7 @@ static const struct omap_dss_features omap4430_es1_0_dss_features  = {
 
 	.num_mgrs = 3,
 	.num_ovls = 4,
+	.num_wbs = 1,
 	.supported_displays = omap4_dss_supported_displays,
 	.supported_outputs = omap4_dss_supported_outputs,
 	.supported_color_modes = omap4_dss_supported_color_modes,
@@ -731,6 +743,7 @@ static const struct omap_dss_features omap4430_es2_0_1_2_dss_features = {
 
 	.num_mgrs = 3,
 	.num_ovls = 4,
+	.num_wbs = 1,
 	.supported_displays = omap4_dss_supported_displays,
 	.supported_outputs = omap4_dss_supported_outputs,
 	.supported_color_modes = omap4_dss_supported_color_modes,
@@ -752,6 +765,7 @@ static const struct omap_dss_features omap4_dss_features = {
 
 	.num_mgrs = 3,
 	.num_ovls = 4,
+	.num_wbs = 1,
 	.supported_displays = omap4_dss_supported_displays,
 	.supported_outputs = omap4_dss_supported_outputs,
 	.supported_color_modes = omap4_dss_supported_color_modes,
@@ -829,6 +843,11 @@ int dss_feat_get_num_ovls(void)
 	return omap_current_dss_features->num_ovls;
 }
 
+int dss_feat_get_num_wbs(void)
+{
+	return omap_current_dss_features->num_wbs;
+}
+
 unsigned long dss_feat_get_param_min(enum dss_range_param param)
 {
 	return omap_current_dss_features->dss_params[param].min;
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index 89df2aa860d4..9218113b5e88 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -105,6 +105,7 @@ enum dss_range_param {
 /* DSS Feature Functions */
 int dss_feat_get_num_mgrs(void);
 int dss_feat_get_num_ovls(void);
+int dss_feat_get_num_wbs(void);
 unsigned long dss_feat_get_param_min(enum dss_range_param param);
 unsigned long dss_feat_get_param_max(enum dss_range_param param);
 enum omap_display_type dss_feat_get_supported_displays(enum omap_channel channel);
-- 
cgit v1.2.1


From 36d87d95587825c39ee8e127d56aafeb7dda45da Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Sat, 28 Jul 2012 22:59:03 +0530
Subject: OMAPDSS: DISPC: Configure input and output sizes for writeback

Writeback uses the WB_PICTURE_SIZE register to define the size of the content
written to memory, this is the output of the scaler. It uses the WB_SIZE
register to define the size of the content coming from the overlay/manager to
which it is connected, this is the input to the scaler. This naming is different
as compared to overlays.

Add checks for writeback in dispc_ovl_set_input_size() and
dispc_ovl_set_output_size() to write to the correct registers.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index b1b9e3f1be90..b9e53b3cbe05 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -719,7 +719,7 @@ static void dispc_ovl_set_input_size(enum omap_plane plane, int width,
 {
 	u32 val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
 
-	if (plane == OMAP_DSS_GFX)
+	if (plane == OMAP_DSS_GFX || plane == OMAP_DSS_WB)
 		dispc_write_reg(DISPC_OVL_SIZE(plane), val);
 	else
 		dispc_write_reg(DISPC_OVL_PICTURE_SIZE(plane), val);
@@ -734,7 +734,10 @@ static void dispc_ovl_set_output_size(enum omap_plane plane, int width,
 
 	val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0);
 
-	dispc_write_reg(DISPC_OVL_SIZE(plane), val);
+	if (plane == OMAP_DSS_WB)
+		dispc_write_reg(DISPC_OVL_PICTURE_SIZE(plane), val);
+	else
+		dispc_write_reg(DISPC_OVL_SIZE(plane), val);
 }
 
 static void dispc_ovl_set_zorder(enum omap_plane plane,
-- 
cgit v1.2.1


From f92afae2af702d209ac86bdb7642edb2f10bf8f3 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 24 Aug 2012 11:11:14 +0530
Subject: OMAPDSS: DISPC: Downscale chroma if plane is writeback

When converting YUYV444 content to YUV422 or NV12 formats through writeback
pipeline, the scaler needs to downscale the chroma plane. Ensure that chroma
is downscaled when the pipeline is writeback.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index b9e53b3cbe05..435e565a7fc5 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1460,7 +1460,7 @@ static void dispc_ovl_set_scaling_uv(enum omap_plane plane,
 {
 	int scale_x = out_width != orig_width;
 	int scale_y = out_height != orig_height;
-	bool chroma_upscale = true;
+	bool chroma_upscale = plane != OMAP_DSS_WB ? true : false;
 
 	if (!dss_has_feature(FEAT_HANDLE_UV_SEPARATE))
 		return;
-- 
cgit v1.2.1


From 2a5561b1f7a2c12db912b0d3c5fc830817d413a9 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 16 Jul 2012 16:37:45 +0530
Subject: OMAPDSS: DISPC: Don't set chroma resampling bit for writeback

The bit YUVCHROMARESAMPLING isn't there for writeback in DISPC_WB_ATTRIBUTES2.
It isn't there because we don't upsample chroma like for video pipelines, we
downsample chroma in writeback to get YUV422 or NV12 formats from the YUV444
input.

Ignore this bit in dispc_ovl_set_scaling_uv() if the plane is OMAP_DSS_WB.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 435e565a7fc5..d46cf29a90aa 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -1468,7 +1468,8 @@ static void dispc_ovl_set_scaling_uv(enum omap_plane plane,
 			color_mode != OMAP_DSS_COLOR_UYVY &&
 			color_mode != OMAP_DSS_COLOR_NV12)) {
 		/* reset chroma resampling for RGB formats  */
-		REG_FLD_MOD(DISPC_OVL_ATTRIBUTES2(plane), 0, 8, 8);
+		if (plane != OMAP_DSS_WB)
+			REG_FLD_MOD(DISPC_OVL_ATTRIBUTES2(plane), 0, 8, 8);
 		return;
 	}
 
@@ -1520,8 +1521,10 @@ static void dispc_ovl_set_scaling_uv(enum omap_plane plane,
 			out_width, out_height, five_taps,
 				rotation, DISPC_COLOR_COMPONENT_UV);
 
-	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES2(plane),
-		(scale_x || scale_y) ? 1 : 0, 8, 8);
+	if (plane != OMAP_DSS_WB)
+		REG_FLD_MOD(DISPC_OVL_ATTRIBUTES2(plane),
+			(scale_x || scale_y) ? 1 : 0, 8, 8);
+
 	/* set H scaling */
 	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), scale_x ? 1 : 0, 5, 5);
 	/* set V scaling */
-- 
cgit v1.2.1


From d9ac773cd0f285c6df45ac35c52d47d8e6fa7c13 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Sat, 22 Sep 2012 12:38:19 +0530
Subject: OMAPDSS: DISPC: Add function to set channel in for writeback

Writeback can take input from either one of the overlays, or one of the overlay
managers. Add an enum which represents the channel_in for writeback, and maps
to the register field programming.

Add a function to configure channel in for writeback. This will be used later in
APPLY.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c |  7 +++++++
 drivers/video/omap2/dss/dss.h   | 13 +++++++++++++
 2 files changed, 20 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index d46cf29a90aa..f0796bafa74e 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -983,6 +983,13 @@ static enum omap_channel dispc_ovl_get_channel_out(enum omap_plane plane)
 	return channel;
 }
 
+void dispc_wb_set_channel_in(enum dss_writeback_channel channel)
+{
+	enum omap_plane plane = OMAP_DSS_WB;
+
+	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), channel, 18, 16);
+}
+
 static void dispc_ovl_set_burst_size(enum omap_plane plane,
 		enum omap_burst_size burst_size)
 {
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 322a2be7b4c6..379e0782eefb 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -113,6 +113,17 @@ enum dss_dsi_content_type {
 	DSS_DSI_CONTENT_GENERIC,
 };
 
+enum dss_writeback_channel {
+	DSS_WB_LCD1_MGR =	0,
+	DSS_WB_LCD2_MGR =	1,
+	DSS_WB_TV_MGR =		2,
+	DSS_WB_OVL0 =		3,
+	DSS_WB_OVL1 =		4,
+	DSS_WB_OVL2 =		5,
+	DSS_WB_OVL3 =		6,
+	DSS_WB_LCD3_MGR =	7,
+};
+
 struct dss_clock_info {
 	/* rates that we get with dividers below */
 	unsigned long fck;
@@ -475,6 +486,8 @@ int dispc_mgr_get_clock_div(enum omap_channel channel,
 void dispc_mgr_setup(enum omap_channel channel,
 		struct omap_overlay_manager_info *info);
 
+void dispc_wb_set_channel_in(enum dss_writeback_channel channel);
+
 /* VENC */
 #ifdef CONFIG_OMAP2_DSS_VENC
 int venc_init_platform_driver(void) __init;
-- 
cgit v1.2.1


From 749feffa6b697c15f6016063994ca9d0ec300235 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 31 Aug 2012 12:32:52 +0530
Subject: OMAPDSS: DISPC: Configure overlay-like parameters in dispc_wb_setup

Create struct omap_dss_writeback_info, this is similar to omap_overlay_info,
the major difference is that there is no parameter which describes the input
size to writeback, this is because this is always fixed, and decided by the
connected overlay or overlay manager. One more difference is that screen_width
is renamed to buf_width, to give the value of stride the writeback buffer has.

Call dispc_ovl_setup_common() through dispc_wb_setup() to configure overlay-like
parameters. The parameters in dispc_ovl_setup_common() which do not hold for
writeback are filled passed as zeroes or false, the code takes care of not
configuring them as they won't possess the needed overlay caps.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 27 +++++++++++++++++++++++++++
 drivers/video/omap2/dss/dss.h   |  2 ++
 2 files changed, 29 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index f0796bafa74e..4d8e04583873 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -2481,6 +2481,33 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 	return r;
 }
 
+int dispc_wb_setup(const struct omap_dss_writeback_info *wi,
+		const struct omap_video_timings *mgr_timings)
+{
+	int r;
+	enum omap_plane plane = OMAP_DSS_WB;
+	const int pos_x = 0, pos_y = 0;
+	const u8 zorder = 0, global_alpha = 0;
+	const bool replication = false;
+	int in_width = mgr_timings->x_res;
+	int in_height = mgr_timings->y_res;
+	enum omap_overlay_caps caps =
+		OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA;
+
+	DSSDBG("dispc_wb_setup, pa %x, pa_uv %x, %d,%d -> %dx%d, cmode %x, "
+		"rot %d, mir %d\n", wi->paddr, wi->p_uv_addr, in_width,
+		in_height, wi->width, wi->height, wi->color_mode, wi->rotation,
+		wi->mirror);
+
+	r = dispc_ovl_setup_common(plane, caps, wi->paddr, wi->p_uv_addr,
+		wi->buf_width, pos_x, pos_y, in_width, in_height, wi->width,
+		wi->height, wi->color_mode, wi->rotation, wi->mirror, zorder,
+		wi->pre_mult_alpha, global_alpha, wi->rotation_type,
+		replication, mgr_timings, false);
+
+	return r;
+}
+
 int dispc_ovl_enable(enum omap_plane plane, bool enable)
 {
 	DSSDBG("dispc_enable_plane %d, %d\n", plane, enable);
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 379e0782eefb..3f9208e88203 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -487,6 +487,8 @@ void dispc_mgr_setup(enum omap_channel channel,
 		struct omap_overlay_manager_info *info);
 
 void dispc_wb_set_channel_in(enum dss_writeback_channel channel);
+int dispc_wb_setup(const struct omap_dss_writeback_info *wi,
+		const struct omap_video_timings *timings);
 
 /* VENC */
 #ifdef CONFIG_OMAP2_DSS_VENC
-- 
cgit v1.2.1


From 9e4a0fc76549e1105fd4a2c7e03871c31110387e Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Fri, 24 Aug 2012 16:59:26 +0530
Subject: OMAPDSS: DISPC: Configure writeback specific parameters in
 dispc_wb_setup()

Configure some of the writeback specific parameters in dispc_wb_setup(). The
writeback parameters configured are:

truncation: This needs to be set if the color depth input to writeback is more
than the color depth of the color mode we want to store in memory.

writeback mode: This configures whether we want to use writeback in mem to mem
or capture mode. This information will be directly passed by APPLY later.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 28 ++++++++++++++++++++++++++--
 drivers/video/omap2/dss/dss.h   |  2 +-
 2 files changed, 27 insertions(+), 3 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 4d8e04583873..9f083a952747 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -2482,13 +2482,15 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
 }
 
 int dispc_wb_setup(const struct omap_dss_writeback_info *wi,
-		const struct omap_video_timings *mgr_timings)
+		bool mem_to_mem, const struct omap_video_timings *mgr_timings)
 {
 	int r;
+	u32 l;
 	enum omap_plane plane = OMAP_DSS_WB;
 	const int pos_x = 0, pos_y = 0;
 	const u8 zorder = 0, global_alpha = 0;
 	const bool replication = false;
+	bool truncation;
 	int in_width = mgr_timings->x_res;
 	int in_height = mgr_timings->y_res;
 	enum omap_overlay_caps caps =
@@ -2503,7 +2505,29 @@ int dispc_wb_setup(const struct omap_dss_writeback_info *wi,
 		wi->buf_width, pos_x, pos_y, in_width, in_height, wi->width,
 		wi->height, wi->color_mode, wi->rotation, wi->mirror, zorder,
 		wi->pre_mult_alpha, global_alpha, wi->rotation_type,
-		replication, mgr_timings, false);
+		replication, mgr_timings, mem_to_mem);
+
+	switch (wi->color_mode) {
+	case OMAP_DSS_COLOR_RGB16:
+	case OMAP_DSS_COLOR_RGB24P:
+	case OMAP_DSS_COLOR_ARGB16:
+	case OMAP_DSS_COLOR_RGBA16:
+	case OMAP_DSS_COLOR_RGB12U:
+	case OMAP_DSS_COLOR_ARGB16_1555:
+	case OMAP_DSS_COLOR_XRGB16_1555:
+	case OMAP_DSS_COLOR_RGBX16:
+		truncation = true;
+		break;
+	default:
+		truncation = false;
+		break;
+	}
+
+	/* setup extra DISPC_WB_ATTRIBUTES */
+	l = dispc_read_reg(DISPC_OVL_ATTRIBUTES(plane));
+	l = FLD_MOD(l, truncation, 10, 10);	/* TRUNCATIONENABLE */
+	l = FLD_MOD(l, mem_to_mem, 19, 19);	/* WRITEBACKMODE */
+	dispc_write_reg(DISPC_OVL_ATTRIBUTES(plane), l);
 
 	return r;
 }
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 3f9208e88203..8677f5157318 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -488,7 +488,7 @@ void dispc_mgr_setup(enum omap_channel channel,
 
 void dispc_wb_set_channel_in(enum dss_writeback_channel channel);
 int dispc_wb_setup(const struct omap_dss_writeback_info *wi,
-		const struct omap_video_timings *timings);
+		bool mem_to_mem, const struct omap_video_timings *timings);
 
 /* VENC */
 #ifdef CONFIG_OMAP2_DSS_VENC
-- 
cgit v1.2.1


From 8bbe09ee4d2c3f201c302f0af75a7c5e17d72625 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Mon, 10 Sep 2012 17:31:39 +0530
Subject: OMAPDSS: DISPC: Configure writeback FIFOs

Extend the DISPC fifo functions to also configure the writeback FIFO thresholds.

The most optimal configuration for writeback is to push out data to the
interconnect the moment writeback pushes enough pixels in the FIFO to form a
burst. This reduces the chance of writeback overflowing it's FIFO.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 9f083a952747..6f326765f341 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -993,7 +993,7 @@ void dispc_wb_set_channel_in(enum dss_writeback_channel channel)
 static void dispc_ovl_set_burst_size(enum omap_plane plane,
 		enum omap_burst_size burst_size)
 {
-	static const unsigned shifts[] = { 6, 14, 14, 14, };
+	static const unsigned shifts[] = { 6, 14, 14, 14, 14, };
 	int shift;
 
 	shift = shifts[plane];
@@ -1225,6 +1225,14 @@ void dispc_ovl_compute_fifo_thresholds(enum omap_plane plane,
 	if (manual_update && dss_has_feature(FEAT_OMAP3_DSI_FIFO_BUG)) {
 		*fifo_low = ovl_fifo_size - burst_size * 2;
 		*fifo_high = total_fifo_size - burst_size;
+	} else if (plane == OMAP_DSS_WB) {
+		/*
+		 * Most optimal configuration for writeback is to push out data
+		 * to the interconnect the moment writeback pushes enough pixels
+		 * in the FIFO to form a burst
+		 */
+		*fifo_low = 0;
+		*fifo_high = burst_size;
 	} else {
 		*fifo_low = ovl_fifo_size - burst_size;
 		*fifo_high = total_fifo_size - buf_unit;
-- 
cgit v1.2.1


From 0b23e5b86850857192c589f837b92e1ac568b485 Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Sat, 22 Sep 2012 12:39:33 +0530
Subject: OMAPDSS: DISPC: Add manager like functions for writeback

Add functions to enable writeback, and set/check state of GO bit. These bits are
identical in behaviour with the corresponding overlay manager bits. Configure
them in a similar way to mgr_enable() and mgr_go_* functions. Add a helper to
get the FRAMEDONE irq corresponding to writeback.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 70 +++++++++++++++++++++++++++++++++++++++++
 drivers/video/omap2/dss/dss.h   |  5 +++
 2 files changed, 75 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 6f326765f341..3ca9a30473d3 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -536,6 +536,11 @@ u32 dispc_mgr_get_framedone_irq(enum omap_channel channel)
 	return mgr_desc[channel].framedone_irq;
 }
 
+u32 dispc_wb_get_framedone_irq(void)
+{
+	return DISPC_IRQ_FRAMEDONEWB;
+}
+
 bool dispc_mgr_go_busy(enum omap_channel channel)
 {
 	return mgr_fld_read(channel, DISPC_MGR_FLD_GO) == 1;
@@ -563,6 +568,30 @@ void dispc_mgr_go(enum omap_channel channel)
 	mgr_fld_write(channel, DISPC_MGR_FLD_GO, 1);
 }
 
+bool dispc_wb_go_busy(void)
+{
+	return REG_GET(DISPC_CONTROL2, 6, 6) == 1;
+}
+
+void dispc_wb_go(void)
+{
+	enum omap_plane plane = OMAP_DSS_WB;
+	bool enable, go;
+
+	enable = REG_GET(DISPC_OVL_ATTRIBUTES(plane), 0, 0) == 1;
+
+	if (!enable)
+		return;
+
+	go = REG_GET(DISPC_CONTROL2, 6, 6) == 1;
+	if (go) {
+		DSSERR("GO bit not down for WB\n");
+		return;
+	}
+
+	REG_FLD_MOD(DISPC_CONTROL2, 1, 6, 6);
+}
+
 static void dispc_ovl_write_firh_reg(enum omap_plane plane, int reg, u32 value)
 {
 	dispc_write_reg(DISPC_OVL_FIR_COEF_H(plane, reg), value);
@@ -2692,6 +2721,47 @@ void dispc_mgr_enable(enum omap_channel channel, bool enable)
 		BUG();
 }
 
+void dispc_wb_enable(bool enable)
+{
+	enum omap_plane plane = OMAP_DSS_WB;
+	struct completion frame_done_completion;
+	bool is_on;
+	int r;
+	u32 irq;
+
+	is_on = REG_GET(DISPC_OVL_ATTRIBUTES(plane), 0, 0);
+	irq = DISPC_IRQ_FRAMEDONEWB;
+
+	if (!enable && is_on) {
+		init_completion(&frame_done_completion);
+
+		r = omap_dispc_register_isr(dispc_disable_isr,
+				&frame_done_completion, irq);
+		if (r)
+			DSSERR("failed to register FRAMEDONEWB isr\n");
+	}
+
+	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), enable ? 1 : 0, 0, 0);
+
+	if (!enable && is_on) {
+		if (!wait_for_completion_timeout(&frame_done_completion,
+					msecs_to_jiffies(100)))
+			DSSERR("timeout waiting for FRAMEDONEWB\n");
+
+		r = omap_dispc_unregister_isr(dispc_disable_isr,
+				&frame_done_completion, irq);
+		if (r)
+			DSSERR("failed to unregister FRAMEDONEWB isr\n");
+	}
+}
+
+bool dispc_wb_is_enabled(void)
+{
+	enum omap_plane plane = OMAP_DSS_WB;
+
+	return REG_GET(DISPC_OVL_ATTRIBUTES(plane), 0, 0);
+}
+
 void dispc_lcd_enable_signal_polarity(bool act_high)
 {
 	if (!dss_has_feature(FEAT_LCDENABLEPOL))
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 8677f5157318..6728892f9dad 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -486,6 +486,11 @@ int dispc_mgr_get_clock_div(enum omap_channel channel,
 void dispc_mgr_setup(enum omap_channel channel,
 		struct omap_overlay_manager_info *info);
 
+u32 dispc_wb_get_framedone_irq(void);
+bool dispc_wb_go_busy(void);
+void dispc_wb_go(void);
+void dispc_wb_enable(bool enable);
+bool dispc_wb_is_enabled(void);
 void dispc_wb_set_channel_in(enum dss_writeback_channel channel);
 int dispc_wb_setup(const struct omap_dss_writeback_info *wi,
 		bool mem_to_mem, const struct omap_video_timings *timings);
-- 
cgit v1.2.1


From 6e5264b0380593efda8157406ec40f00daac9f2d Mon Sep 17 00:00:00 2001
From: Archit Taneja <archit@ti.com>
Date: Tue, 11 Sep 2012 12:04:47 +0530
Subject: OMAPDSS: DISPC: Configure color conversion coefficients for writeback

Writeback pipeline receives RGB data from one of the overlays or one of the
overlay managers. If the target color mode is YUV422 or NV12, we need to convert
the RGB pixels to YUV. The scaler in WB then converts it to the target color
mode.

Hence, the color conversion coefficients that need to be programmed are the ones
which convert a RGB24 pixel to YUV444. Program these coefficients for writeback
pipeline.

Rearrange the code a bit to configure different coefficients for overlays and
writeback.

Signed-off-by: Archit Taneja <archit@ti.com>
---
 drivers/video/omap2/dss/dispc.c | 61 ++++++++++++++++++++++-------------------
 1 file changed, 33 insertions(+), 28 deletions(-)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 3ca9a30473d3..a173a9481a23 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -236,6 +236,11 @@ static const struct {
 	},
 };
 
+struct color_conv_coef {
+	int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb;
+	int full_range;
+};
+
 static void _omap_dispc_set_irqs(void);
 static unsigned long dispc_plane_pclk_rate(enum omap_plane plane);
 static unsigned long dispc_plane_lclk_rate(enum omap_plane plane);
@@ -674,41 +679,41 @@ static void dispc_ovl_set_scale_coef(enum omap_plane plane, int fir_hinc,
 	}
 }
 
-static void _dispc_setup_color_conv_coef(void)
-{
-	int i;
-	const struct color_conv_coef {
-		int  ry,  rcr,  rcb,   gy,  gcr,  gcb,   by,  bcr,  bcb;
-		int  full_range;
-	}  ctbl_bt601_5 = {
-		298,  409,    0,  298, -208, -100,  298,    0,  517, 0,
-	};
-
-	const struct color_conv_coef *ct;
 
+static void dispc_ovl_write_color_conv_coef(enum omap_plane plane,
+		const struct color_conv_coef *ct)
+{
 #define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0))
 
-	ct = &ctbl_bt601_5;
+	dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 0), CVAL(ct->rcr, ct->ry));
+	dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 1), CVAL(ct->gy,  ct->rcb));
+	dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 2), CVAL(ct->gcb, ct->gcr));
+	dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 3), CVAL(ct->bcr, ct->by));
+	dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 4), CVAL(0, ct->bcb));
 
-	for (i = 1; i < dss_feat_get_num_ovls(); i++) {
-		dispc_write_reg(DISPC_OVL_CONV_COEF(i, 0),
-			CVAL(ct->rcr, ct->ry));
-		dispc_write_reg(DISPC_OVL_CONV_COEF(i, 1),
-			CVAL(ct->gy,  ct->rcb));
-		dispc_write_reg(DISPC_OVL_CONV_COEF(i, 2),
-			CVAL(ct->gcb, ct->gcr));
-		dispc_write_reg(DISPC_OVL_CONV_COEF(i, 3),
-			CVAL(ct->bcr, ct->by));
-		dispc_write_reg(DISPC_OVL_CONV_COEF(i, 4),
-			CVAL(0, ct->bcb));
-
-		REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(i), ct->full_range,
-			11, 11);
-	}
+	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), ct->full_range, 11, 11);
 
 #undef CVAL
 }
 
+static void dispc_setup_color_conv_coef(void)
+{
+	int i;
+	int num_ovl = dss_feat_get_num_ovls();
+	int num_wb = dss_feat_get_num_wbs();
+	const struct color_conv_coef ctbl_bt601_5_ovl = {
+		298, 409, 0, 298, -208, -100, 298, 0, 517, 0,
+	};
+	const struct color_conv_coef ctbl_bt601_5_wb = {
+		66, 112, -38, 129, -94, -74, 25, -18, 112, 0,
+	};
+
+	for (i = 1; i < num_ovl; i++)
+		dispc_ovl_write_color_conv_coef(i, &ctbl_bt601_5_ovl);
+
+	for (; i < num_wb; i++)
+		dispc_ovl_write_color_conv_coef(i, &ctbl_bt601_5_wb);
+}
 
 static void dispc_ovl_set_ba0(enum omap_plane plane, u32 paddr)
 {
@@ -3975,7 +3980,7 @@ static void _omap_dispc_initial_config(void)
 	if (dss_has_feature(FEAT_FUNCGATED))
 		REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9);
 
-	_dispc_setup_color_conv_coef();
+	dispc_setup_color_conv_coef();
 
 	dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY);
 
-- 
cgit v1.2.1


From 13b1ba7de8d0ecc42e4f9c002d5b0c1a48f05e58 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Fri, 28 Sep 2012 10:03:03 +0300
Subject: OMAPDSS: add missing include for string.h

Both dpi.c and sdi.c use strcmp(), but do not include string.h. With
some Kconfig options string.h is included implicitly, but with some
other the compilation fails:

drivers/video/omap2/dss/dpi.c:407:5: error: implicit declaration of
function 'strcmp'

Include string.h in both dpi.c and sdi.c

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dpi.c | 1 +
 drivers/video/omap2/dss/sdi.c | 1 +
 2 files changed, 2 insertions(+)

(limited to 'drivers/video')

diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index d73a549050e4..56748cf8760e 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -29,6 +29,7 @@
 #include <linux/errno.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
+#include <linux/string.h>
 
 #include <video/omapdss.h>
 
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 86f096aaf4fe..7760851f6e5d 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -25,6 +25,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/export.h>
 #include <linux/platform_device.h>
+#include <linux/string.h>
 
 #include <video/omapdss.h>
 #include "dss.h"
-- 
cgit v1.2.1