From 138651e1186bef33d0d330ca735d85784ee6535b Mon Sep 17 00:00:00 2001 From: "Ji-Ze Hong (Peter Hong)" Date: Thu, 11 Jan 2018 14:47:17 +0800 Subject: USB: serial: f81534: add output pin control The F81532/534 had 3 output pin (M0/SD, M1, M2) with open-drain mode to control transceiver. We'll read it from internal Flash with address 0x2f05~0x2f08 for 4 ports. The value is range from 0 to 7. The M0/SD is MSB of this value. For a examples, If read value is 6, we'll write M0/SD, M1, M2 as 1, 1, 0. Signed-off-by: Ji-Ze Hong (Peter Hong) Signed-off-by: Johan Hovold --- drivers/usb/serial/f81534.c | 67 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 66 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c index 5caa945217b5..f448a91be612 100644 --- a/drivers/usb/serial/f81534.c +++ b/drivers/usb/serial/f81534.c @@ -52,6 +52,7 @@ #define F81534_CUSTOM_NO_CUSTOM_DATA 0xff #define F81534_CUSTOM_VALID_TOKEN 0xf0 #define F81534_CONF_OFFSET 1 +#define F81534_CONF_GPIO_OFFSET 4 #define F81534_MAX_DATA_BLOCK 64 #define F81534_MAX_BUS_RETRY 20 @@ -164,6 +165,23 @@ struct f81534_port_private { u8 phy_num; }; +struct f81534_pin_data { + const u16 reg_addr; + const u8 reg_mask; +}; + +struct f81534_port_out_pin { + struct f81534_pin_data pin[3]; +}; + +/* Pin output value for M2/M1/M0(SD) */ +static const struct f81534_port_out_pin f81534_port_out_pins[] = { + { { { 0x2ae8, BIT(7) }, { 0x2a90, BIT(5) }, { 0x2a90, BIT(4) } } }, + { { { 0x2ae8, BIT(6) }, { 0x2ae8, BIT(0) }, { 0x2ae8, BIT(3) } } }, + { { { 0x2a90, BIT(0) }, { 0x2ae8, BIT(2) }, { 0x2a80, BIT(6) } } }, + { { { 0x2a90, BIT(3) }, { 0x2a90, BIT(2) }, { 0x2a90, BIT(1) } } }, +}; + static u32 const baudrate_table[] = { 115200, 921600, 1152000, 1500000 }; static u8 const clock_table[] = { F81534_CLK_1_846_MHZ, F81534_CLK_14_77_MHZ, F81534_CLK_18_46_MHZ, F81534_CLK_24_MHZ }; @@ -273,6 +291,22 @@ end: return status; } +static int f81534_set_mask_register(struct usb_serial *serial, u16 reg, + u8 mask, u8 data) +{ + int status; + u8 tmp; + + status = f81534_get_register(serial, reg, &tmp); + if (status) + return status; + + tmp &= ~mask; + tmp |= (mask & data); + + return f81534_set_register(serial, reg, tmp); +} + static int f81534_set_port_register(struct usb_serial_port *port, u16 reg, u8 data) { @@ -1281,6 +1315,37 @@ static void f81534_lsr_worker(struct work_struct *work) dev_warn(&port->dev, "read LSR failed: %d\n", status); } +static int f81534_set_port_output_pin(struct usb_serial_port *port) +{ + struct f81534_serial_private *serial_priv; + struct f81534_port_private *port_priv; + struct usb_serial *serial; + const struct f81534_port_out_pin *pins; + int status; + int i; + u8 value; + u8 idx; + + serial = port->serial; + serial_priv = usb_get_serial_data(serial); + port_priv = usb_get_serial_port_data(port); + + idx = F81534_CONF_GPIO_OFFSET + port_priv->phy_num; + value = serial_priv->conf_data[idx]; + pins = &f81534_port_out_pins[port_priv->phy_num]; + + for (i = 0; i < ARRAY_SIZE(pins->pin); ++i) { + status = f81534_set_mask_register(serial, + pins->pin[i].reg_addr, pins->pin[i].reg_mask, + value & BIT(i) ? pins->pin[i].reg_mask : 0); + if (status) + return status; + } + + dev_dbg(&port->dev, "Output pin (M0/M1/M2): %d\n", value); + return 0; +} + static int f81534_port_probe(struct usb_serial_port *port) { struct f81534_serial_private *serial_priv; @@ -1339,7 +1404,7 @@ static int f81534_port_probe(struct usb_serial_port *port) break; } - return 0; + return f81534_set_port_output_pin(port); } static int f81534_port_remove(struct usb_serial_port *port) -- cgit v1.2.1