From 704aa0b7a9744d5f2b5c1fa68b826fcca73a2104 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 7 Nov 2005 15:38:24 -0800 Subject: [PATCH] USB: wakeup flag updates (3/3) isp116x-hcd This makes the ISP116x HCD use the driver model wakeup flags for its controller, not the flags in the HCD glue (which will be removed). Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp116x-hcd.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/usb/host/isp116x-hcd.c') diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 342cfadc999a..c95af116f9e7 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1378,7 +1378,8 @@ static int isp116x_start(struct usb_hcd *hcd) val = 0; if (board->remote_wakeup_enable) { - hcd->can_wakeup = 1; + if (!device_can_wakeup(hcd->self.controller)) + device_init_wakeup(hcd->self.controller, 1); val |= RH_HS_DRWE; } isp116x_write_reg32(isp116x, HCRHSTATUS, val); @@ -1428,7 +1429,7 @@ static int isp116x_bus_suspend(struct usb_hcd *hcd) hcd->state = HC_STATE_QUIESCING; val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE); val |= HCCONTROL_USB_SUSPEND; - if (hcd->remote_wakeup) + if (device_may_wakeup(&hcd->self.root_hub->dev)) val |= HCCONTROL_RWE; /* Wait for usb transfers to finish */ mdelay(2); -- cgit v1.2.1