From c73cee717e7d5da0698acb720ad1219646fe4f46 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 31 Oct 2012 13:21:06 -0400 Subject: USB: EHCI: remove ehci_port_power() routine This patch (as1623) removes the ehci_port_power() routine and all the places that call it. There's no reason for ehci-hcd to change the port power settings; the hub driver takes care of all that stuff. There is one exception: When the controller is resumed from hibernation or following a loss of power, the ports that are supposed to be handed over to a companion controller must be powered on first. Otherwise the handover won't work. This process is not visible to the hub driver, so it has to be handled in ehci-hcd. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-grlib.c | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-) (limited to 'drivers/usb/host/ehci-grlib.c') diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c index 3180cb3624d9..da4269550fba 100644 --- a/drivers/usb/host/ehci-grlib.c +++ b/drivers/usb/host/ehci-grlib.c @@ -34,22 +34,6 @@ #define GRUSBHC_HCIVERSION 0x0100 /* Known value of cap. reg. HCIVERSION */ -/* called during probe() after chip reset completes */ -static int ehci_grlib_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval; - - retval = ehci_setup(hcd); - if (retval) - return retval; - - ehci_port_power(ehci, 1); - - return retval; -} - - static const struct hc_driver ehci_grlib_hc_driver = { .description = hcd_name, .product_desc = "GRLIB GRUSBHC EHCI", @@ -64,7 +48,7 @@ static const struct hc_driver ehci_grlib_hc_driver = { /* * basic lifecycle operations */ - .reset = ehci_grlib_setup, + .reset = ehci_setup, .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, -- cgit v1.2.1