From c8679a2fb8decc949c848ca58f93ff7fb619931a Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Mon, 13 Oct 2014 09:53:04 +0800 Subject: usb: chipidea: host: add portpower override This patch adds an external portpower override callback, only single port regulator control is supported now. Signed-off-by: Michael Grzeschik Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/host.c | 67 +++++++++++++++++++++++++++++++-------------- 1 file changed, 46 insertions(+), 21 deletions(-) (limited to 'drivers/usb/chipidea/host.c') diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index ebde7b6ce687..33027abb5349 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -34,6 +34,44 @@ static struct hc_driver __read_mostly ci_ehci_hc_driver; +struct ehci_ci_priv { + struct regulator *reg_vbus; +}; + +static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv; + struct device *dev = hcd->self.controller; + struct ci_hdrc *ci = dev_get_drvdata(dev); + int ret = 0; + int port = HCS_N_PORTS(ehci->hcs_params); + + if (priv->reg_vbus && !ci_otg_is_fsm_mode(ci)) { + if (port > 1) { + dev_warn(dev, + "Not support multi-port regulator control\n"); + return 0; + } + if (enable) + ret = regulator_enable(priv->reg_vbus); + else + ret = regulator_disable(priv->reg_vbus); + if (ret) { + dev_err(dev, + "Failed to %s vbus regulator, ret=%d\n", + enable ? "enable" : "disable", ret); + return ret; + } + } + return 0; +}; + +static const struct ehci_driver_overrides ehci_ci_overrides = { + .extra_priv_size = sizeof(struct ehci_ci_priv), + .port_power = ehci_ci_portpower, +}; + static irqreturn_t host_irq(struct ci_hdrc *ci) { return usb_hcd_irq(ci->irq, ci->hcd); @@ -43,6 +81,7 @@ static int host_start(struct ci_hdrc *ci) { struct usb_hcd *hcd; struct ehci_hcd *ehci; + struct ehci_ci_priv *priv; int ret; if (usb_disabled()) @@ -68,23 +107,15 @@ static int host_start(struct ci_hdrc *ci) ehci->has_tdi_phy_lpm = ci->hw_bank.lpm; ehci->imx28_write_fix = ci->imx28_write_fix; - /* - * vbus is always on if host is not in OTG FSM mode, - * otherwise should be controlled by OTG FSM - */ - if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) { - ret = regulator_enable(ci->platdata->reg_vbus); - if (ret) { - dev_err(ci->dev, - "Failed to enable vbus regulator, ret=%d\n", - ret); - goto put_hcd; - } - } + priv = (struct ehci_ci_priv *)ehci->priv; + priv->reg_vbus = NULL; + + if (ci->platdata->reg_vbus) + priv->reg_vbus = ci->platdata->reg_vbus; ret = usb_add_hcd(hcd, 0, 0); if (ret) { - goto disable_reg; + goto put_hcd; } else { struct usb_otg *otg = ci->transceiver->otg; @@ -100,10 +131,6 @@ static int host_start(struct ci_hdrc *ci) return ret; -disable_reg: - if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) - regulator_disable(ci->platdata->reg_vbus); - put_hcd: usb_put_hcd(hcd); @@ -117,8 +144,6 @@ static void host_stop(struct ci_hdrc *ci) if (hcd) { usb_remove_hcd(hcd); usb_put_hcd(hcd); - if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) - regulator_disable(ci->platdata->reg_vbus); } } @@ -146,7 +171,7 @@ int ci_hdrc_host_init(struct ci_hdrc *ci) rdrv->name = "host"; ci->roles[CI_ROLE_HOST] = rdrv; - ehci_init_driver(&ci_ehci_hc_driver, NULL); + ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides); return 0; } -- cgit v1.2.1