From 87a713c8ffca33d8e497a8b6c02034332bd80394 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 10 Aug 2016 23:54:13 +0200 Subject: 8250/fintek: rename IRQ_MODE macro A bugfix for the fintek driver required defining some macros, but one of them clashes with a system header on ARM: drivers/tty/serial/8250/8250_fintek.c:34:0: error: "IRQ_MODE" redefined [-Werror] #define IRQ_MODE 0x70 In file included from /git/arm-soc/arch/arm/include/asm/ptrace.h:13:0, from /git/arm-soc/arch/arm/include/asm/irqflags.h:6, from /git/arm-soc/include/linux/irqflags.h:15, from /git/arm-soc/arch/arm/include/asm/bitops.h:27, from /git/arm-soc/include/linux/bitops.h:36, from /git/arm-soc/include/linux/kernel.h:10, from /git/arm-soc/include/linux/list.h:8, from /git/arm-soc/include/linux/module.h:9, from /git/arm-soc/drivers/tty/serial/8250/8250_fintek.c:11: arch/arm/include/uapi/asm/ptrace.h:55:0: note: this is the location of the previous definition This renames the newly introduced 'IRQ_MODE' macro to FINTEK_IRQ_MODE. Signed-off-by: Arnd Bergmann Fixes: 4da22f1418cb ("serial: 8250_fintek: fix the mismatched IRQ mode") Link: https://patchwork.kernel.org/patch/9200119/ Acked-by: Ji-Ze Hong (Peter Hong) Acked-by: Ricardo Ribalda Delgado Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_fintek.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c index 737b4b3957b0..0facc789fe7d 100644 --- a/drivers/tty/serial/8250/8250_fintek.c +++ b/drivers/tty/serial/8250/8250_fintek.c @@ -31,7 +31,7 @@ #define IO_ADDR2 0x60 #define LDN 0x7 -#define IRQ_MODE 0x70 +#define FINTEK_IRQ_MODE 0x70 #define IRQ_SHARE BIT(4) #define IRQ_MODE_MASK (BIT(6) | BIT(5)) #define IRQ_LEVEL_LOW 0 @@ -195,7 +195,7 @@ static int fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool level_mode) outb(LDN, pdata->base_port + ADDR_PORT); outb(pdata->index, pdata->base_port + DATA_PORT); - outb(IRQ_MODE, pdata->base_port + ADDR_PORT); + outb(FINTEK_IRQ_MODE, pdata->base_port + ADDR_PORT); tmp = inb(pdata->base_port + DATA_PORT); tmp &= ~IRQ_MODE_MASK; -- cgit v1.2.1 From 5db4f7f80d165fc9725f356e99feec409e446baa Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 16 Aug 2016 15:06:54 +0300 Subject: Revert "tty/serial/8250: use mctrl_gpio helpers" Serial console is broken in v4.8-rcX. Mika and I independently bisected down to commit 4ef03d328769 ("tty/serial/8250: use mctrl_gpio helpers"). Since neither author nor anyone else didn't propose a solution we better revert it for now. This reverts commit 4ef03d328769eddbfeca1f1c958fdb181a69c341. Link: https://lkml.kernel.org/r/20160809130229.GN1729@lahna.fi.intel.com Signed-off-by: Andy Shevchenko Tested-by: Heikki Krogerus Tested-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.h | 35 +---------------------------------- drivers/tty/serial/8250/8250_core.c | 9 --------- drivers/tty/serial/8250/8250_omap.c | 31 +++++++++++++------------------ drivers/tty/serial/8250/8250_port.c | 7 +------ drivers/tty/serial/8250/Kconfig | 1 - 5 files changed, 15 insertions(+), 68 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 122e0e4029fe..1a16feac9a36 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -15,8 +15,6 @@ #include #include -#include "../serial_mctrl_gpio.h" - struct uart_8250_dma { int (*tx_dma)(struct uart_8250_port *p); int (*rx_dma)(struct uart_8250_port *p); @@ -133,43 +131,12 @@ void serial8250_em485_destroy(struct uart_8250_port *p); static inline void serial8250_out_MCR(struct uart_8250_port *up, int value) { - int mctrl_gpio = 0; - serial_out(up, UART_MCR, value); - - if (value & UART_MCR_RTS) - mctrl_gpio |= TIOCM_RTS; - if (value & UART_MCR_DTR) - mctrl_gpio |= TIOCM_DTR; - - mctrl_gpio_set(up->gpios, mctrl_gpio); } static inline int serial8250_in_MCR(struct uart_8250_port *up) { - int mctrl, mctrl_gpio = 0; - - mctrl = serial_in(up, UART_MCR); - - /* save current MCR values */ - if (mctrl & UART_MCR_RTS) - mctrl_gpio |= TIOCM_RTS; - if (mctrl & UART_MCR_DTR) - mctrl_gpio |= TIOCM_DTR; - - mctrl_gpio = mctrl_gpio_get_outputs(up->gpios, &mctrl_gpio); - - if (mctrl_gpio & TIOCM_RTS) - mctrl |= UART_MCR_RTS; - else - mctrl &= ~UART_MCR_RTS; - - if (mctrl_gpio & TIOCM_DTR) - mctrl |= UART_MCR_DTR; - else - mctrl &= ~UART_MCR_DTR; - - return mctrl; + return serial_in(up, UART_MCR); } #if defined(__alpha__) && !defined(CONFIG_PCI) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 13ad5c3d2e68..dcf43f66404f 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -974,8 +974,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up) uart = serial8250_find_match_or_unused(&up->port); if (uart && uart->port.type != PORT_8250_CIR) { - struct mctrl_gpios *gpios; - if (uart->port.dev) uart_remove_one_port(&serial8250_reg, &uart->port); @@ -1013,13 +1011,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up) if (up->port.flags & UPF_FIXED_TYPE) uart->port.type = up->port.type; - gpios = mctrl_gpio_init(&uart->port, 0); - if (IS_ERR(gpios)) { - if (PTR_ERR(gpios) != -ENOSYS) - return PTR_ERR(gpios); - } else - uart->gpios = gpios; - serial8250_set_defaults(uart); /* Possibly override default I/O functions. */ diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index e14982f36a04..61ad6c3b20a0 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -134,21 +134,18 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) serial8250_do_set_mctrl(port, mctrl); - if (IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(up->gpios, - UART_GPIO_RTS))) { - /* - * Turn off autoRTS if RTS is lowered and restore autoRTS - * setting if RTS is raised - */ - lcr = serial_in(up, UART_LCR); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) - priv->efr |= UART_EFR_RTS; - else - priv->efr &= ~UART_EFR_RTS; - serial_out(up, UART_EFR, priv->efr); - serial_out(up, UART_LCR, lcr); - } + /* + * Turn off autoRTS if RTS is lowered and restore autoRTS setting + * if RTS is raised + */ + lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) + priv->efr |= UART_EFR_RTS; + else + priv->efr &= ~UART_EFR_RTS; + serial_out(up, UART_EFR, priv->efr); + serial_out(up, UART_LCR, lcr); } /* @@ -449,9 +446,7 @@ static void omap_8250_set_termios(struct uart_port *port, priv->efr = 0; up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); - if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW - && IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(up->gpios, - UART_GPIO_RTS))) { + if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */ up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; priv->efr |= UART_EFR_CTS; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 7481b95c6d84..bdfa659b9606 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1618,8 +1618,6 @@ static void serial8250_disable_ms(struct uart_port *port) if (up->bugs & UART_BUG_NOMSR) return; - mctrl_gpio_disable_ms(up->gpios); - up->ier &= ~UART_IER_MSI; serial_port_out(port, UART_IER, up->ier); } @@ -1632,8 +1630,6 @@ static void serial8250_enable_ms(struct uart_port *port) if (up->bugs & UART_BUG_NOMSR) return; - mctrl_gpio_enable_ms(up->gpios); - up->ier |= UART_IER_MSI; serial8250_rpm_get(up); @@ -1917,8 +1913,7 @@ unsigned int serial8250_do_get_mctrl(struct uart_port *port) ret |= TIOCM_DSR; if (status & UART_MSR_CTS) ret |= TIOCM_CTS; - - return mctrl_gpio_get(up->gpios, &ret); + return ret; } EXPORT_SYMBOL_GPL(serial8250_do_get_mctrl); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index c9ec839a5ddf..7c6f7afca5dd 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -6,7 +6,6 @@ config SERIAL_8250 tristate "8250/16550 and compatible serial support" select SERIAL_CORE - select SERIAL_MCTRL_GPIO if GPIOLIB ---help--- This selects whether you want to include the driver for the standard serial ports. The standard answer is Y. People who might say N -- cgit v1.2.1 From 47b34d2ef266e2c283b514d65c8963c2ccd42474 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 1 Jul 2016 17:21:49 +0300 Subject: serial: 8250_mid: fix divide error bug if baud rate is 0 Since the commit c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID"), the 8250 driver crashes in the byt_set_termios() function with a divide error. This is caused by the fact that a baud rate of 0 (B0) is not handled properly. Fix it by falling back to B9600 in this case. Reported-by: "Mendez Salinas, Fernando" Fixes: c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID") Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_mid.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c index 339de9cd0866..20c5db2f4264 100644 --- a/drivers/tty/serial/8250/8250_mid.c +++ b/drivers/tty/serial/8250/8250_mid.c @@ -168,6 +168,9 @@ static void mid8250_set_termios(struct uart_port *p, unsigned long w = BIT(24) - 1; unsigned long mul, div; + /* Gracefully handle the B0 case: fall back to B9600 */ + fuart = fuart ? fuart : 9600 * 16; + if (mid->board->freq < fuart) { /* Find prescaler value that satisfies Fuart < Fref */ if (mid->board->freq > baud) -- cgit v1.2.1 From c8d192428f52f244130b84650ad616df09f2b1e1 Mon Sep 17 00:00:00 2001 From: Jimi Damon Date: Wed, 20 Jul 2016 17:00:40 -0700 Subject: serial: 8250: added acces i/o products quad and octal serial cards Added devices ids for acces i/o products quad and octal serial cards that make use of existing Pericom PI7C9X7954 and PI7C9X7958 configurations . Signed-off-by: Jimi Damon Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 139 +++++++++++++++++++++++++++++++++++++ 1 file changed, 139 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 20ebaea5c414..bc51b32b2774 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1950,6 +1950,43 @@ pci_wch_ch38x_setup(struct serial_private *priv, #define PCI_DEVICE_ID_PERICOM_PI7C9X7954 0x7954 #define PCI_DEVICE_ID_PERICOM_PI7C9X7958 0x7958 +#define PCI_VENDOR_ID_ACCESIO 0x494f +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB 0x1051 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S 0x1053 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB 0x105C +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S 0x105E +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB 0x1091 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2 0x1093 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB 0x1099 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4 0x109B +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB 0x10D1 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM 0x10D3 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB 0x10DA +#define PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM 0x10DC +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1 0x1108 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2 0x1110 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2 0x1111 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4 0x1118 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4 0x1119 +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S 0x1152 +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S 0x115A +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2 0x1190 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2 0x1191 +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4 0x1198 +#define PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4 0x1199 +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM 0x11D0 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4 0x105A +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4 0x105B +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8 0x106A +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8 0x106B +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4 0x1098 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8 0x10A9 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM 0x10D9 +#define PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM 0x10E9 +#define PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM 0x11D8 + + + /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588 @@ -5112,6 +5149,108 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_pericom_PI7C9X7958 }, + /* + * ACCES I/O Products quad + */ + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7954 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, + { PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_pericom_PI7C9X7958 }, /* * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) */ -- cgit v1.2.1