From ab735611402f4278420068fc37cfb03dab626436 Mon Sep 17 00:00:00 2001 From: Tudor Ambarus Date: Fri, 28 Jun 2019 15:30:34 +0000 Subject: spi: atmel-quadspi: fix resume call When waking up from the Suspend-to-RAM state, the following error was seen: m25p80 spi2.0: flash operation timed out The flash remained in an undefined state, returning 0xFFs. Fix it by setting the Serial Clock Baud Rate, as it was set before the conversion to SPIMEM. Tested with sama5d2_xplained and mx25l25673g spi-nor in Backup + Self-Refresh and Suspend modes. Fixes: 0e6aae08e9ae ("spi: Add QuadSPI driver for Atmel SAMA5D2") Reported-by: Mark Deneen Signed-off-by: Tudor Ambarus Signed-off-by: Mark Brown --- drivers/spi/atmel-quadspi.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c index 32eb7447c31a..6a7d7b553d95 100644 --- a/drivers/spi/atmel-quadspi.c +++ b/drivers/spi/atmel-quadspi.c @@ -151,6 +151,7 @@ struct atmel_qspi { const struct atmel_qspi_caps *caps; u32 pending; u32 mr; + u32 scr; struct completion cmd_completion; }; @@ -382,7 +383,7 @@ static int atmel_qspi_setup(struct spi_device *spi) struct spi_controller *ctrl = spi->master; struct atmel_qspi *aq = spi_controller_get_devdata(ctrl); unsigned long src_rate; - u32 scr, scbr; + u32 scbr; if (ctrl->busy) return -EBUSY; @@ -399,8 +400,8 @@ static int atmel_qspi_setup(struct spi_device *spi) if (scbr > 0) scbr--; - scr = QSPI_SCR_SCBR(scbr); - writel_relaxed(scr, aq->regs + QSPI_SCR); + aq->scr = QSPI_SCR_SCBR(scbr); + writel_relaxed(aq->scr, aq->regs + QSPI_SCR); return 0; } @@ -584,6 +585,9 @@ static int __maybe_unused atmel_qspi_resume(struct device *dev) clk_prepare_enable(aq->qspick); atmel_qspi_init(aq); + + writel_relaxed(aq->scr, aq->regs + QSPI_SCR); + return 0; } -- cgit v1.2.1