From 8736b9270c2f8993ca44c30f64d4c6d25e379687 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 26 Jan 2007 00:56:43 -0800 Subject: [PATCH] S3C24XX: fix passing spi chipselect to select routine It turns out that the spi chipselect was not being passed to the set_cs routine if one was specified in the platform data. As part of the fix, change to using a set_cs field in the controller state, and put a default gpio routine in if the data passed does not specify it. Also remove the //#define DEBUG Signed-off-by: Ben Dooks Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_s3c24xx.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index 8ca08713528e..651379c51ae6 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -10,9 +10,6 @@ * */ - -//#define DEBUG - #include #include #include @@ -44,6 +41,9 @@ struct s3c24xx_spi { int len; int count; + int (*set_cs)(struct s3c2410_spi_info *spi, + int cs, int pol); + /* data buffers */ const unsigned char *tx; unsigned char *rx; @@ -64,6 +64,11 @@ static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev) return spi_master_get_devdata(sdev->master); } +static void s3c24xx_spi_gpiocs(struct s3c2410_spi_info *spi, int cs, int pol) +{ + s3c2410_gpio_setpin(spi->pin_cs, pol); +} + static void s3c24xx_spi_chipsel(struct spi_device *spi, int value) { struct s3c24xx_spi *hw = to_hw(spi); @@ -72,10 +77,7 @@ static void s3c24xx_spi_chipsel(struct spi_device *spi, int value) switch (value) { case BITBANG_CS_INACTIVE: - if (hw->pdata->set_cs) - hw->pdata->set_cs(hw->pdata, value, cspol); - else - s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol ^ 1); + hw->pdata->set_cs(hw->pdata, spi->chip_select, cspol^1); break; case BITBANG_CS_ACTIVE: @@ -96,14 +98,9 @@ static void s3c24xx_spi_chipsel(struct spi_device *spi, int value) /* write new configration */ writeb(spcon, hw->regs + S3C2410_SPCON); - - if (hw->pdata->set_cs) - hw->pdata->set_cs(hw->pdata, value, cspol); - else - s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol); + hw->pdata->set_cs(hw->pdata, spi->chip_select, cspol); break; - } } @@ -330,9 +327,12 @@ static int s3c24xx_spi_probe(struct platform_device *pdev) /* setup any gpio we can */ if (!hw->pdata->set_cs) { + hw->set_cs = s3c24xx_spi_gpiocs; + s3c2410_gpio_setpin(hw->pdata->pin_cs, 1); s3c2410_gpio_cfgpin(hw->pdata->pin_cs, S3C2410_GPIO_OUTPUT); - } + } else + hw->set_cs = hw->pdata->set_cs; /* register our spi controller */ -- cgit v1.2.1 From 7f6ee1adc75bf31d1b76814338f76a88e653cb60 Mon Sep 17 00:00:00 2001 From: Justin Clacherty Date: Fri, 26 Jan 2007 00:56:44 -0800 Subject: [PATCH] spi: fix error setting the spi mode in pxa2xx_spi.c Currently the spi mode can be set to the wrong mode if you are switching from any mode other than mode 0. This is because the mode is set using a bitwise or on uncleared bits. The following patch clears the mode bits before setting the new mode. I've also modified it to use the appropriate defines from pxa-regs.h for readability. Signed-off-by: Justin Clacherty Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/pxa2xx_spi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 6ed3f1da9296..8b41f9cc2560 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -1169,8 +1169,9 @@ static int setup(struct spi_device *spi) spi->bits_per_word - 16 : spi->bits_per_word) | SSCR0_SSE | (spi->bits_per_word > 16 ? SSCR0_EDSS : 0); - chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) << 4) - | (((spi->mode & SPI_CPOL) != 0) << 3); + chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH); + chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0) + | (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0); /* NOTE: PXA25x_SSP _could_ use external clocking ... */ if (drv_data->ssp_type != PXA25x_SSP) -- cgit v1.2.1 From 1e9a51dca19dc1d8807c63cb3bd4413d3f95aaf5 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 26 Jan 2007 00:56:54 -0800 Subject: [PATCH] SPI: alternative fix for spi_busnum_to_master If a SPI master device exists, udev (udevtrigger) causes kernel crash, due to wrong kobj pointer in kobject_uevent_env(). This problem was not in 2.6.19. The backtrace (on MIPS) was: [<8024db6c>] kobject_uevent_env+0x54c/0x5e8 [<802a8264>] store_uevent+0x1c/0x3c (in drivers/class.c) [<801cb14c>] subsys_attr_store+0x2c/0x50 [<801cb80c>] flush_write_buffer+0x38/0x5c [<801cb900>] sysfs_write_file+0xd0/0x190 [<80181444>] vfs_write+0xc4/0x1a0 [<80181cdc>] sys_write+0x54/0xa0 [<8010dae4>] stack_done+0x20/0x3c flush_write_buffer() passes kobject of spi_master_class.subsys to subsys_addr_store(), then subsys_addr_store() passes a pointer to a struct subsystem to store_uevent() which expects a pointer to a struct class_device. The problem seems subsys_attr_store() called instead of class_device_attr_store(). This mismatch was caused by commit 3bd0f6943520e459659d10f3282285e43d3990f1, which overrides kset of master class. This made spi_master_class.subsys.kset.ktype NULL so subsys_sysfs_ops is used instead of class_dev_sysfs_ops. The commit was to fix spi_busnum_to_master(). Here is a patch fixes this function in other way, just searching children list of class_device. Signed-off-by: Atsushi Nemoto Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 270e6211c2e3..6307428d2c94 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -366,7 +366,6 @@ spi_alloc_master(struct device *dev, unsigned size) class_device_initialize(&master->cdev); master->cdev.class = &spi_master_class; - kobj_set_kset_s(&master->cdev, spi_master_class.subsys); master->cdev.dev = get_device(dev); spi_master_set_devdata(master, &master[1]); @@ -466,14 +465,20 @@ EXPORT_SYMBOL_GPL(spi_unregister_master); */ struct spi_master *spi_busnum_to_master(u16 bus_num) { - char name[9]; - struct kobject *bus; - - snprintf(name, sizeof name, "spi%u", bus_num); - bus = kset_find_obj(&spi_master_class.subsys.kset, name); - if (bus) - return container_of(bus, struct spi_master, cdev.kobj); - return NULL; + struct class_device *cdev; + struct spi_master *master = NULL; + struct spi_master *m; + + down(&spi_master_class.sem); + list_for_each_entry(cdev, &spi_master_class.children, node) { + m = container_of(cdev, struct spi_master, cdev); + if (m->bus_num == bus_num) { + master = spi_master_get(m); + break; + } + } + up(&spi_master_class.sem); + return master; } EXPORT_SYMBOL_GPL(spi_busnum_to_master); -- cgit v1.2.1