From 766ed70447e0a9cfb23d068a4a929e18e54b0022 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 18 Dec 2012 14:25:43 +0530 Subject: spi: remove check for bits_per_word on transfer from low level driver The spi core make sure that each transfer structure have the proper setting for bits_per_word before calling low level transfer APIs. Hence it is no more require to check again in low level driver for this field whether this is set correct or not. Removing such code from low level driver. The txx9 change also removes a test for bits_per_word set to 0, and forcing it to 8 in that case. This can also be removed now since spi_setup() ensures spi->bits_per_word is not zero. if (!spi->bits_per_word) spi->bits_per_word = 8; Signed-off-by: Laxman Dewangan Signed-off-by: Grant Likely --- drivers/spi/spi-bfin5xx.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/spi/spi-bfin5xx.c') diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index 0429d833f75b..7d7c9918fffe 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -642,8 +642,7 @@ static void bfin_spi_pump_transfers(unsigned long data) drv_data->cs_change = transfer->cs_change; /* Bits per word setup */ - bits_per_word = transfer->bits_per_word ? : - message->spi->bits_per_word ? : 8; + bits_per_word = transfer->bits_per_word; if (bits_per_word % 16 == 0) { drv_data->n_bytes = bits_per_word/8; drv_data->len = (transfer->len) >> 1; -- cgit v1.2.1