From 68ac64cd3fd89fdaa091701f6ab98a9065e9b1b5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 30 Apr 2006 11:13:50 +0100 Subject: [SERIAL] Clean up serial locking when obtaining a reference to a port The locking for the uart_port is over complicated, and can be simplified if we introduce a flag to indicate that a port is "dead" and will be removed. This also helps the validator because it removes a case of non-nested unlock ordering. Signed-off-by: Russell King Signed-off-by: Ingo Molnar Signed-off-by: Andrew Morton --- drivers/serial/serial_core.c | 114 +++++++++++++++++++++++-------------------- 1 file changed, 60 insertions(+), 54 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index fcd7744c4253..aeb8153ccf24 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1500,20 +1500,18 @@ uart_block_til_ready(struct file *filp, struct uart_state *state) static struct uart_state *uart_get(struct uart_driver *drv, int line) { struct uart_state *state; + int ret = 0; - mutex_lock(&port_mutex); state = drv->state + line; if (mutex_lock_interruptible(&state->mutex)) { - state = ERR_PTR(-ERESTARTSYS); - goto out; + ret = -ERESTARTSYS; + goto err; } state->count++; - if (!state->port) { - state->count--; - mutex_unlock(&state->mutex); - state = ERR_PTR(-ENXIO); - goto out; + if (!state->port || state->port->flags & UPF_DEAD) { + ret = -ENXIO; + goto err_unlock; } if (!state->info) { @@ -1531,15 +1529,17 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line) tasklet_init(&state->info->tlet, uart_tasklet_action, (unsigned long)state); } else { - state->count--; - mutex_unlock(&state->mutex); - state = ERR_PTR(-ENOMEM); + ret = -ENOMEM; + goto err_unlock; } } - - out: - mutex_unlock(&port_mutex); return state; + + err_unlock: + state->count--; + mutex_unlock(&state->mutex); + err: + return ERR_PTR(ret); } /* @@ -2085,45 +2085,6 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state, } } -/* - * This reverses the effects of uart_configure_port, hanging up the - * port before removal. - */ -static void -uart_unconfigure_port(struct uart_driver *drv, struct uart_state *state) -{ - struct uart_port *port = state->port; - struct uart_info *info = state->info; - - if (info && info->tty) - tty_vhangup(info->tty); - - mutex_lock(&state->mutex); - - state->info = NULL; - - /* - * Free the port IO and memory resources, if any. - */ - if (port->type != PORT_UNKNOWN) - port->ops->release_port(port); - - /* - * Indicate that there isn't a port here anymore. - */ - port->type = PORT_UNKNOWN; - - /* - * Kill the tasklet, and free resources. - */ - if (info) { - tasklet_kill(&info->tlet); - kfree(info); - } - - mutex_unlock(&state->mutex); -} - static struct tty_operations uart_ops = { .open = uart_open, .close = uart_close, @@ -2270,6 +2231,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port) state = drv->state + port->line; mutex_lock(&port_mutex); + mutex_lock(&state->mutex); if (state->port) { ret = -EINVAL; goto out; @@ -2304,7 +2266,13 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port) port->cons && !(port->cons->flags & CON_ENABLED)) register_console(port->cons); + /* + * Ensure UPF_DEAD is not set. + */ + port->flags &= ~UPF_DEAD; + out: + mutex_unlock(&state->mutex); mutex_unlock(&port_mutex); return ret; @@ -2322,6 +2290,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port) int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port) { struct uart_state *state = drv->state + port->line; + struct uart_info *info; BUG_ON(in_interrupt()); @@ -2331,12 +2300,49 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port) mutex_lock(&port_mutex); + /* + * Mark the port "dead" - this prevents any opens from + * succeeding while we shut down the port. + */ + mutex_lock(&state->mutex); + port->flags |= UPF_DEAD; + mutex_unlock(&state->mutex); + /* * Remove the devices from devfs */ tty_unregister_device(drv->tty_driver, port->line); - uart_unconfigure_port(drv, state); + info = state->info; + if (info && info->tty) + tty_vhangup(info->tty); + + /* + * All users of this port should now be disconnected from + * this driver, and the port shut down. We should be the + * only thread fiddling with this port from now on. + */ + state->info = NULL; + + /* + * Free the port IO and memory resources, if any. + */ + if (port->type != PORT_UNKNOWN) + port->ops->release_port(port); + + /* + * Indicate that there isn't a port here anymore. + */ + port->type = PORT_UNKNOWN; + + /* + * Kill the tasklet, and free resources. + */ + if (info) { + tasklet_kill(&info->tlet); + kfree(info); + } + state->port = NULL; mutex_unlock(&port_mutex); -- cgit v1.2.1 From 85835f442e5bbf9d3b8f6e574751da8db77016d2 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 30 Apr 2006 11:15:58 +0100 Subject: [SERIAL] AMD Alchemy UART: claim memory range I've noticed that the 8250/Au1x00 driver (drivers/serial/8250_au1x00.c) doesn't claim UART memory ranges and uses wrong (KSEG1-based) UART addresses instead of the physical ones. Signed-off-by: Sergei Shtylyov Signed-off-by: Russell King --- drivers/serial/8250.c | 6 ++++++ drivers/serial/8250_au1x00.c | 5 ++--- 2 files changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 674b15c78f68..d641ac4e976e 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1906,6 +1906,9 @@ static int serial8250_request_std_resource(struct uart_8250_port *up) int ret = 0; switch (up->port.iotype) { + case UPIO_AU: + size = 0x100000; + /* fall thru */ case UPIO_MEM: if (!up->port.mapbase) break; @@ -1938,6 +1941,9 @@ static void serial8250_release_std_resource(struct uart_8250_port *up) unsigned int size = 8 << up->port.regshift; switch (up->port.iotype) { + case UPIO_AU: + size = 0x100000; + /* fall thru */ case UPIO_MEM: if (!up->port.mapbase) break; diff --git a/drivers/serial/8250_au1x00.c b/drivers/serial/8250_au1x00.c index 3d1bfd07208d..58015fd14be9 100644 --- a/drivers/serial/8250_au1x00.c +++ b/drivers/serial/8250_au1x00.c @@ -30,13 +30,12 @@ { \ .iobase = _base, \ .membase = (void __iomem *)_base,\ - .mapbase = _base, \ + .mapbase = CPHYSADDR(_base), \ .irq = _irq, \ .uartclk = 0, /* filled */ \ .regshift = 2, \ .iotype = UPIO_AU, \ - .flags = UPF_SKIP_TEST | \ - UPF_IOREMAP, \ + .flags = UPF_SKIP_TEST \ } static struct plat_serial8250_port au1x00_data[] = { -- cgit v1.2.1 From b32b19b8ffc05cbd3bf91c65e205f6a912ca15d9 Mon Sep 17 00:00:00 2001 From: Jon Anders Haugum Date: Sun, 30 Apr 2006 11:20:56 +0100 Subject: [SERIAL] 8250: set divisor register correctly for AMD Alchemy SoC uart Alchemy SoC uart have got a non-standard divisor register that needs some special handling. This patch adds divisor read/write functions with test and special handling for Alchemy internal uart. Signed-off-by: Jon Anders Haugum Signed-off-by: Russell King --- drivers/serial/8250.c | 55 +++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 42 insertions(+), 13 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index d641ac4e976e..9cc74712795d 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -362,6 +362,40 @@ serial_out(struct uart_8250_port *up, int offset, int value) #define serial_inp(up, offset) serial_in(up, offset) #define serial_outp(up, offset, value) serial_out(up, offset, value) +/* Uart divisor latch read */ +static inline int _serial_dl_read(struct uart_8250_port *up) +{ + return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8; +} + +/* Uart divisor latch write */ +static inline void _serial_dl_write(struct uart_8250_port *up, int value) +{ + serial_outp(up, UART_DLL, value & 0xff); + serial_outp(up, UART_DLM, value >> 8 & 0xff); +} + +#ifdef CONFIG_SERIAL_8250_AU1X00 +/* Au1x00 haven't got a standard divisor latch */ +static int serial_dl_read(struct uart_8250_port *up) +{ + if (up->port.iotype == UPIO_AU) + return __raw_readl(up->port.membase + 0x28); + else + return _serial_dl_read(up); +} + +static void serial_dl_write(struct uart_8250_port *up, int value) +{ + if (up->port.iotype == UPIO_AU) + __raw_writel(value, up->port.membase + 0x28); + else + _serial_dl_write(up, value); +} +#else +#define serial_dl_read(up) _serial_dl_read(up) +#define serial_dl_write(up, value) _serial_dl_write(up, value) +#endif /* * For the 16C950 @@ -494,7 +528,8 @@ static void disable_rsa(struct uart_8250_port *up) */ static int size_fifo(struct uart_8250_port *up) { - unsigned char old_fcr, old_mcr, old_dll, old_dlm, old_lcr; + unsigned char old_fcr, old_mcr, old_lcr; + unsigned short old_dl; int count; old_lcr = serial_inp(up, UART_LCR); @@ -505,10 +540,8 @@ static int size_fifo(struct uart_8250_port *up) UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); serial_outp(up, UART_MCR, UART_MCR_LOOP); serial_outp(up, UART_LCR, UART_LCR_DLAB); - old_dll = serial_inp(up, UART_DLL); - old_dlm = serial_inp(up, UART_DLM); - serial_outp(up, UART_DLL, 0x01); - serial_outp(up, UART_DLM, 0x00); + old_dl = serial_dl_read(up); + serial_dl_write(up, 0x0001); serial_outp(up, UART_LCR, 0x03); for (count = 0; count < 256; count++) serial_outp(up, UART_TX, count); @@ -519,8 +552,7 @@ static int size_fifo(struct uart_8250_port *up) serial_outp(up, UART_FCR, old_fcr); serial_outp(up, UART_MCR, old_mcr); serial_outp(up, UART_LCR, UART_LCR_DLAB); - serial_outp(up, UART_DLL, old_dll); - serial_outp(up, UART_DLM, old_dlm); + serial_dl_write(up, old_dl); serial_outp(up, UART_LCR, old_lcr); return count; @@ -750,8 +782,7 @@ static void autoconfig_16550a(struct uart_8250_port *up) serial_outp(up, UART_LCR, 0xE0); - quot = serial_inp(up, UART_DLM) << 8; - quot += serial_inp(up, UART_DLL); + quot = serial_dl_read(up); quot <<= 3; status1 = serial_in(up, 0x04); /* EXCR1 */ @@ -759,8 +790,7 @@ static void autoconfig_16550a(struct uart_8250_port *up) status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ serial_outp(up, 0x04, status1); - serial_outp(up, UART_DLL, quot & 0xff); - serial_outp(up, UART_DLM, quot >> 8); + serial_dl_write(up, quot); serial_outp(up, UART_LCR, 0); @@ -1862,8 +1892,7 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios, serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ } - serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */ - serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */ + serial_dl_write(up, quot); /* * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR -- cgit v1.2.1 From a88d75b257b2b28b26d7d4d2b640f05feb00ad53 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 30 Apr 2006 11:30:15 +0100 Subject: [SERIAL] Remove unconditional enable of TX irq for console A bug report from Gerd Hoffmann has highlighted that unconditionally enabling the transmit interrupt at the end of console writes is very bad. In Gerd's case, it causes the test for buggy UARTs to give false positives, incorrectly identifying ports as buggy when they are not. Moreover, if we unconditionally enable the interrupt, and the port is sharing it's interrupt with other ports, there is the very real possibility that we'll cause an interrupt storm. (Not all ports use OUT2 as an interrupt mask.) Hence, revert part of f91a3715db2bb44fcf08cec642e68f919b70f7f4 and all of f5968b37b3ad35b682b574b578843a0361218aff until a better solution can be found. Signed-off-by: Russell King --- drivers/serial/8250.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 9cc74712795d..e001ea0606ec 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2256,8 +2256,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) * and restore the IER */ wait_for_xmitr(up, BOTH_EMPTY); - up->ier |= UART_IER_THRI; - serial_out(up, UART_IER, ier | UART_IER_THRI); + serial_out(up, UART_IER, ier); } static int serial8250_console_setup(struct console *co, char *options) -- cgit v1.2.1 From d8a5a8d7cc32e4474326e0ecc1b959063490efc9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 2 May 2006 16:04:29 +0100 Subject: [SERIAL] 8250: add locking to console write function x86 SMP breaks as a result of the previous change, we have no real option other than to add locking to the 8250 console write function. If an oops is in progress, try to acquire the lock. If we fail to do so, continue anyway. Signed-off-by: Russell King --- drivers/serial/8250.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/serial') diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index e001ea0606ec..bbf78aaf9e01 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2235,10 +2235,17 @@ static void serial8250_console_write(struct console *co, const char *s, unsigned int count) { struct uart_8250_port *up = &serial8250_ports[co->index]; + unsigned long flags; unsigned int ier; + int locked = 1; touch_nmi_watchdog(); + if (oops_in_progress) { + locked = spin_trylock_irqsave(&up->port.lock, flags); + } else + spin_lock_irqsave(&up->port.lock, flags); + /* * First save the IER then disable the interrupts */ @@ -2257,6 +2264,9 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) */ wait_for_xmitr(up, BOTH_EMPTY); serial_out(up, UART_IER, ier); + + if (locked) + spin_unlock_irqrestore(&up->port.lock, flags); } static int serial8250_console_setup(struct console *co, char *options) -- cgit v1.2.1 From 1281e36027a9119356bd93b5e7853c72c35dd462 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 16 May 2006 11:28:49 +0100 Subject: [ARM] 3523/1: Serial core pm_state Patch from Andrew Victor The serial_core already manages the power state of the UARTs, and therefore it shouldn't suspend a UART which was previously suspended. This patch modifies serial_core only call the UART-specific power-management function if the PM state is actually changing. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- drivers/serial/serial_core.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index aeb8153ccf24..17839e753e4c 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1907,9 +1907,12 @@ uart_set_options(struct uart_port *port, struct console *co, static void uart_change_pm(struct uart_state *state, int pm_state) { struct uart_port *port = state->port; - if (port->ops->pm) - port->ops->pm(port, pm_state, state->pm_state); - state->pm_state = pm_state; + + if (state->pm_state != pm_state) { + if (port->ops->pm) + port->ops->pm(port, pm_state, state->pm_state); + state->pm_state = pm_state; + } } int uart_suspend_port(struct uart_driver *drv, struct uart_port *port) -- cgit v1.2.1 From 9a2a9bb2010ed7e56547e2bb2041dab14ab0510a Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 15 May 2006 14:10:11 -0700 Subject: [SUNSU]: Fix license. FATAL: modpost: GPL-incompatible module sunsu uses the GPL-only symbol tty_insert_flip_string_flags Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/serial/sunsu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/serial') diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 1c4396c2962d..2b4f96541b8e 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1730,3 +1730,4 @@ static void __exit sunsu_exit(void) module_init(sunsu_probe); module_exit(sunsu_exit); +MODULE_LICENSE("GPL"); -- cgit v1.2.1