From 6f3cbf552e0557a463ad421f07b2e873a608406f Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Fri, 5 Jan 2007 00:05:25 -0500 Subject: [SCSI] scsi_debug: error processing After discussions in the thread titled: [PATCH] scsi_debug: illegal blocking memory allocation here is a patch containing the discussed fix and some other fixes and additions. The patch is against lk 2.6.20-rc3 . The version is bumped to 1.81 . ChangeLog: - Change several GFP_KERNEL allocations to GFP_ATOMIC as they can be called from queuecommand() context - check above allocation returns and if out of memory report DID_REQUEUE in two cases, DID_NO_CONNECT in another, and fail slave configure() in another - add support for WRITE BUFFER command - add aborted_command error injection support (opts mask 0x10), similar mechanism to recovered_error injection. Signed-off-by: Douglas Gilbert Signed-off-by: James Bottomley --- drivers/scsi/scsi_debug.c | 42 +++++++++++++++++++++++++++++++++--------- 1 file changed, 33 insertions(+), 9 deletions(-) (limited to 'drivers/scsi/scsi_debug.c') diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 30ee3d72c021..5adbbeedec38 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -51,10 +51,10 @@ #include "scsi_logging.h" #include "scsi_debug.h" -#define SCSI_DEBUG_VERSION "1.80" -static const char * scsi_debug_version_date = "20061018"; +#define SCSI_DEBUG_VERSION "1.81" +static const char * scsi_debug_version_date = "20070104"; -/* Additional Sense Code (ASC) used */ +/* Additional Sense Code (ASC) */ #define NO_ADDITIONAL_SENSE 0x0 #define LOGICAL_UNIT_NOT_READY 0x4 #define UNRECOVERED_READ_ERR 0x11 @@ -65,9 +65,13 @@ static const char * scsi_debug_version_date = "20061018"; #define INVALID_FIELD_IN_PARAM_LIST 0x26 #define POWERON_RESET 0x29 #define SAVING_PARAMS_UNSUP 0x39 +#define TRANSPORT_PROBLEM 0x4b #define THRESHOLD_EXCEEDED 0x5d #define LOW_POWER_COND_ON 0x5e +/* Additional Sense Code Qualifier (ASCQ) */ +#define ACK_NAK_TO 0x3 + #define SDEBUG_TAGGED_QUEUING 0 /* 0 | MSG_SIMPLE_TAG | MSG_ORDERED_TAG */ /* Default values for driver parameters */ @@ -95,15 +99,20 @@ static const char * scsi_debug_version_date = "20061018"; #define SCSI_DEBUG_OPT_MEDIUM_ERR 2 #define SCSI_DEBUG_OPT_TIMEOUT 4 #define SCSI_DEBUG_OPT_RECOVERED_ERR 8 +#define SCSI_DEBUG_OPT_TRANSPORT_ERR 16 /* When "every_nth" > 0 then modulo "every_nth" commands: * - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set * - a RECOVERED_ERROR is simulated on successful read and write * commands if SCSI_DEBUG_OPT_RECOVERED_ERR is set. + * - a TRANSPORT_ERROR is simulated on successful read and write + * commands if SCSI_DEBUG_OPT_TRANSPORT_ERR is set. * * When "every_nth" < 0 then after "- every_nth" commands: * - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set * - a RECOVERED_ERROR is simulated on successful read and write * commands if SCSI_DEBUG_OPT_RECOVERED_ERR is set. + * - a TRANSPORT_ERROR is simulated on successful read and write + * commands if SCSI_DEBUG_OPT_TRANSPORT_ERR is set. * This will continue until some other action occurs (e.g. the user * writing a new value (other than -1 or 1) to every_nth via sysfs). */ @@ -315,6 +324,7 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done) int target = SCpnt->device->id; struct sdebug_dev_info * devip = NULL; int inj_recovered = 0; + int inj_transport = 0; int delay_override = 0; if (done == NULL) @@ -352,6 +362,8 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done) return 0; /* ignore command causing timeout */ else if (SCSI_DEBUG_OPT_RECOVERED_ERR & scsi_debug_opts) inj_recovered = 1; /* to reads and writes below */ + else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & scsi_debug_opts) + inj_transport = 1; /* to reads and writes below */ } if (devip->wlun) { @@ -468,7 +480,11 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done) mk_sense_buffer(devip, RECOVERED_ERROR, THRESHOLD_EXCEEDED, 0); errsts = check_condition_result; - } + } else if (inj_transport && (0 == errsts)) { + mk_sense_buffer(devip, ABORTED_COMMAND, + TRANSPORT_PROBLEM, ACK_NAK_TO); + errsts = check_condition_result; + } break; case REPORT_LUNS: /* mandatory, ignore unit attention */ delay_override = 1; @@ -531,6 +547,9 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done) delay_override = 1; errsts = check_readiness(SCpnt, 0, devip); break; + case WRITE_BUFFER: + errsts = check_readiness(SCpnt, 1, devip); + break; default: if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) printk(KERN_INFO "scsi_debug: Opcode: 0x%x not " @@ -954,7 +973,9 @@ static int resp_inquiry(struct scsi_cmnd * scp, int target, int alloc_len, n, ret; alloc_len = (cmd[3] << 8) + cmd[4]; - arr = kzalloc(SDEBUG_MAX_INQ_ARR_SZ, GFP_KERNEL); + arr = kzalloc(SDEBUG_MAX_INQ_ARR_SZ, GFP_ATOMIC); + if (! arr) + return DID_REQUEUE << 16; if (devip->wlun) pq_pdt = 0x1e; /* present, wlun */ else if (scsi_debug_no_lun_0 && (0 == devip->lun)) @@ -1217,7 +1238,9 @@ static int resp_report_tgtpgs(struct scsi_cmnd * scp, alen = ((cmd[6] << 24) + (cmd[7] << 16) + (cmd[8] << 8) + cmd[9]); - arr = kzalloc(SDEBUG_MAX_TGTPGS_ARR_SZ, GFP_KERNEL); + arr = kzalloc(SDEBUG_MAX_TGTPGS_ARR_SZ, GFP_ATOMIC); + if (! arr) + return DID_REQUEUE << 16; /* * EVPD page 0x88 states we have two ports, one * real and a fake port with no device connected. @@ -1996,6 +2019,8 @@ static int scsi_debug_slave_configure(struct scsi_device * sdp) if (sdp->host->max_cmd_len != SCSI_DEBUG_MAX_CMD_LEN) sdp->host->max_cmd_len = SCSI_DEBUG_MAX_CMD_LEN; devip = devInfoReg(sdp); + if (NULL == devip) + return 1; /* no resources, will be marked offline */ sdp->hostdata = devip; if (sdp->host->cmd_per_lun) scsi_adjust_queue_depth(sdp, SDEBUG_TAGGED_QUEUING, @@ -2044,7 +2069,7 @@ static struct sdebug_dev_info * devInfoReg(struct scsi_device * sdev) } } if (NULL == open_devip) { /* try and make a new one */ - open_devip = kzalloc(sizeof(*open_devip),GFP_KERNEL); + open_devip = kzalloc(sizeof(*open_devip),GFP_ATOMIC); if (NULL == open_devip) { printk(KERN_ERR "%s: out of memory at line %d\n", __FUNCTION__, __LINE__); @@ -2388,7 +2413,7 @@ MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)"); MODULE_PARM_DESC(no_lun_0, "no LU number 0 (def=0 -> have lun 0)"); MODULE_PARM_DESC(num_parts, "number of partitions(def=0)"); MODULE_PARM_DESC(num_tgts, "number of targets per host to simulate(def=1)"); -MODULE_PARM_DESC(opts, "1->noise, 2->medium_error, 4->... (def=0)"); +MODULE_PARM_DESC(opts, "1->noise, 2->medium_err, 4->timeout, 8->recovered_err... (def=0)"); MODULE_PARM_DESC(ptype, "SCSI peripheral type(def=0[disk])"); MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=5[SPC-3])"); MODULE_PARM_DESC(virtual_gb, "virtual gigabyte size (def=0 -> use dev_size_mb)"); @@ -2943,7 +2968,6 @@ static int sdebug_add_adapter(void) struct list_head *lh, *lh_sf; sdbg_host = kzalloc(sizeof(*sdbg_host),GFP_KERNEL); - if (NULL == sdbg_host) { printk(KERN_ERR "%s: out of memory at line %d\n", __FUNCTION__, __LINE__); -- cgit v1.2.1