From 7f6f794dee50ba33710145140f39de59f5ec764e Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Sat, 13 Nov 2010 04:35:30 +0530 Subject: [SCSI] mpt2sas: Modify code to support Expander switch Issue : Switch swap doesn't work when device missing delay is enabled. (1) add support to individually add and remove phys to and from existing ports. This replaces the routine _transport_delete_duplicate_port. (2) _scsih_sas_host_refresh - was modified to change the link rate from zero to 1.5 GB rate when the firmware reports there is an attached device with zero link. (3) add new function mpt2sas_device_remove, this is wrapper function deletes some redundant code through out driver by combining into one subrountine (4) two subroutines were modified so the sas_device, raid_device, and port lists are traversed once when objects are deleted from the list. Previously it was looping back each time an object was deleted from the list. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.h | 2 + drivers/scsi/mpt2sas/mpt2sas_scsih.c | 143 +++++++++++------------- drivers/scsi/mpt2sas/mpt2sas_transport.c | 185 +++++++++++++++++++++++-------- 3 files changed, 206 insertions(+), 124 deletions(-) (limited to 'drivers/scsi/mpt2sas') diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index edf1a028db6c..428a8c2cf7e0 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -849,6 +849,8 @@ int mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, ulong timeout, struct scsi_cmnd *scmd); void mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle); void mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle); +void mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address); +void mpt2sas_device_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address); struct _sas_node *mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle); struct _sas_node *mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 3e9c78aa4ccb..50c6bdf3fddd 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2584,9 +2584,9 @@ _scsih_block_io_to_children_attached_to_ex(struct MPT2SAS_ADAPTER *ioc, &sas_expander->sas_port_list, port_list) { if (mpt2sas_port->remote_identify.device_type == - MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER || + SAS_EDGE_EXPANDER_DEVICE || mpt2sas_port->remote_identify.device_type == - MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) { + SAS_FANOUT_EXPANDER_DEVICE) { spin_lock_irqsave(&ioc->sas_node_lock, flags); expander_sibling = @@ -3972,6 +3972,7 @@ _scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc) Mpi2ConfigReply_t mpi_reply; Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL; u16 attached_handle; + u8 link_rate; dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "updating handles for sas_host(0x%016llx)\n", @@ -3993,15 +3994,17 @@ _scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc) if (ioc_status != MPI2_IOCSTATUS_SUCCESS) goto out; for (i = 0; i < ioc->sas_hba.num_phys ; i++) { + link_rate = sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4; if (i == 0) ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0-> PhyData[0].ControllerDevHandle); ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle; attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i]. AttachedDevHandle); + if (attached_handle && link_rate < MPI2_SAS_NEG_LINK_RATE_1_5) + link_rate = MPI2_SAS_NEG_LINK_RATE_1_5; mpt2sas_transport_update_links(ioc, ioc->sas_hba.sas_address, - attached_handle, i, sas_iounit_pg0->PhyData[i]. - NegotiatedLinkRate >> 4); + attached_handle, i, link_rate); } out: kfree(sas_iounit_pg0); @@ -4345,14 +4348,14 @@ _scsih_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) } /** - * _scsih_expander_remove - removing expander object + * mpt2sas_expander_remove - removing expander object * @ioc: per adapter object * @sas_address: expander sas_address * * Return nothing. */ -static void -_scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address) +void +mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address) { struct _sas_node *sas_expander; unsigned long flags; @@ -4363,6 +4366,11 @@ _scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address) spin_lock_irqsave(&ioc->sas_node_lock, flags); sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc, sas_address); + if (!sas_expander) { + spin_unlock_irqrestore(&ioc->sas_node_lock, flags); + return; + } + list_del(&sas_expander->list); spin_unlock_irqrestore(&ioc->sas_node_lock, flags); _scsih_expander_node_remove(ioc, sas_expander); } @@ -4652,6 +4660,33 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, sas_device_backup.sas_address)); } +/** + * mpt2sas_device_remove - removing device object + * @ioc: per adapter object + * @sas_address: expander sas_address + * + * Return nothing. + */ +void +mpt2sas_device_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address) +{ + struct _sas_device *sas_device; + unsigned long flags; + + if (ioc->shost_recovery) + return; + + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + sas_address); + if (!sas_device) { + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + return; + } + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + _scsih_remove_device(ioc, sas_device); +} + #ifdef CONFIG_SCSI_MPT2SAS_LOGGING /** * _scsih_sas_topology_change_event_debug - debug for topology event @@ -4853,7 +4888,7 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, /* handle expander removal */ if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING && sas_expander) - _scsih_expander_remove(ioc, sas_address); + mpt2sas_expander_remove(ioc, sas_address); } @@ -6228,7 +6263,7 @@ _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc) sas_expander->responding = 0; continue; } - _scsih_expander_remove(ioc, sas_expander->sas_address); + mpt2sas_expander_remove(ioc, sas_expander->sas_address); goto retry_expander_search; } } @@ -6499,56 +6534,23 @@ static void _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc, struct _sas_node *sas_expander) { - struct _sas_port *mpt2sas_port; - struct _sas_device *sas_device; - struct _sas_node *expander_sibling; - unsigned long flags; - - if (!sas_expander) - return; + struct _sas_port *mpt2sas_port, *next; /* remove sibling ports attached to this expander */ - retry_device_search: - list_for_each_entry(mpt2sas_port, - &sas_expander->sas_port_list, port_list) { - if (mpt2sas_port->remote_identify.device_type == - SAS_END_DEVICE) { - spin_lock_irqsave(&ioc->sas_device_lock, flags); - sas_device = - mpt2sas_scsih_sas_device_find_by_sas_address(ioc, - mpt2sas_port->remote_identify.sas_address); - spin_unlock_irqrestore(&ioc->sas_device_lock, flags); - if (!sas_device) - continue; - _scsih_remove_device(ioc, sas_device); - if (ioc->shost_recovery) - return; - goto retry_device_search; - } - } - - retry_expander_search: - list_for_each_entry(mpt2sas_port, + list_for_each_entry_safe(mpt2sas_port, next, &sas_expander->sas_port_list, port_list) { - + if (ioc->shost_recovery) + return; if (mpt2sas_port->remote_identify.device_type == - MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER || + SAS_END_DEVICE) + mpt2sas_device_remove(ioc, + mpt2sas_port->remote_identify.sas_address); + else if (mpt2sas_port->remote_identify.device_type == + SAS_EDGE_EXPANDER_DEVICE || mpt2sas_port->remote_identify.device_type == - MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) { - - spin_lock_irqsave(&ioc->sas_node_lock, flags); - expander_sibling = - mpt2sas_scsih_expander_find_by_sas_address( - ioc, mpt2sas_port->remote_identify.sas_address); - spin_unlock_irqrestore(&ioc->sas_node_lock, flags); - if (!expander_sibling) - continue; - _scsih_expander_remove(ioc, - expander_sibling->sas_address); - if (ioc->shost_recovery) - return; - goto retry_expander_search; - } + SAS_FANOUT_EXPANDER_DEVICE) + mpt2sas_expander_remove(ioc, + mpt2sas_port->remote_identify.sas_address); } mpt2sas_transport_port_remove(ioc, sas_expander->sas_address, @@ -6559,7 +6561,6 @@ _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc, sas_expander->handle, (unsigned long long) sas_expander->sas_address); - list_del(&sas_expander->list); kfree(sas_expander->phy); kfree(sas_expander); } @@ -6677,9 +6678,7 @@ _scsih_remove(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); - struct _sas_port *mpt2sas_port; - struct _sas_device *sas_device; - struct _sas_node *expander_sibling; + struct _sas_port *mpt2sas_port, *next_port; struct _raid_device *raid_device, *next; struct MPT2SAS_TARGET *sas_target_priv_data; struct workqueue_struct *wq; @@ -6711,28 +6710,18 @@ _scsih_remove(struct pci_dev *pdev) } /* free ports attached to the sas_host */ - retry_again: - list_for_each_entry(mpt2sas_port, + list_for_each_entry_safe(mpt2sas_port, next_port, &ioc->sas_hba.sas_port_list, port_list) { if (mpt2sas_port->remote_identify.device_type == - SAS_END_DEVICE) { - sas_device = - mpt2sas_scsih_sas_device_find_by_sas_address(ioc, - mpt2sas_port->remote_identify.sas_address); - if (sas_device) { - _scsih_remove_device(ioc, sas_device); - goto retry_again; - } - } else { - expander_sibling = - mpt2sas_scsih_expander_find_by_sas_address(ioc, + SAS_END_DEVICE) + mpt2sas_device_remove(ioc, + mpt2sas_port->remote_identify.sas_address); + else if (mpt2sas_port->remote_identify.device_type == + SAS_EDGE_EXPANDER_DEVICE || + mpt2sas_port->remote_identify.device_type == + SAS_FANOUT_EXPANDER_DEVICE) + mpt2sas_expander_remove(ioc, mpt2sas_port->remote_identify.sas_address); - if (expander_sibling) { - _scsih_expander_remove(ioc, - expander_sibling->sas_address); - goto retry_again; - } - } } /* free phys attached to the sas_host */ diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c index b55c6dc07470..cb1cdecbe0f8 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_transport.c +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c @@ -465,62 +465,149 @@ _transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc, return rc; } +/** + * _transport_delete_port - helper function to removing a port + * @ioc: per adapter object + * @mpt2sas_port: mpt2sas per port object + * + * Returns nothing. + */ +static void +_transport_delete_port(struct MPT2SAS_ADAPTER *ioc, + struct _sas_port *mpt2sas_port) +{ + u64 sas_address = mpt2sas_port->remote_identify.sas_address; + enum sas_device_type device_type = + mpt2sas_port->remote_identify.device_type; + + dev_printk(KERN_INFO, &mpt2sas_port->port->dev, + "remove: sas_addr(0x%016llx)\n", + (unsigned long long) sas_address); + + ioc->logging_level |= MPT_DEBUG_TRANSPORT; + if (device_type == SAS_END_DEVICE) + mpt2sas_device_remove(ioc, sas_address); + else if (device_type == SAS_EDGE_EXPANDER_DEVICE || + device_type == SAS_FANOUT_EXPANDER_DEVICE) + mpt2sas_expander_remove(ioc, sas_address); + ioc->logging_level &= ~MPT_DEBUG_TRANSPORT; +} /** - * _transport_delete_duplicate_port - (see below description) + * _transport_delete_phy - helper function to removing single phy from port * @ioc: per adapter object - * @sas_node: sas node object (either expander or sas host) - * @sas_address: sas address of device being added - * @phy_num: phy number + * @mpt2sas_port: mpt2sas per port object + * @mpt2sas_phy: mpt2sas per phy object * - * This function is called when attempting to add a new port that is claiming - * the same phy resources already in use by another port. If we don't release - * the claimed phy resources, the sas transport layer will hang from the BUG - * in sas_port_add_phy. + * Returns nothing. + */ +static void +_transport_delete_phy(struct MPT2SAS_ADAPTER *ioc, + struct _sas_port *mpt2sas_port, struct _sas_phy *mpt2sas_phy) +{ + u64 sas_address = mpt2sas_port->remote_identify.sas_address; + + dev_printk(KERN_INFO, &mpt2sas_phy->phy->dev, + "remove: sas_addr(0x%016llx), phy(%d)\n", + (unsigned long long) sas_address, mpt2sas_phy->phy_id); + + list_del(&mpt2sas_phy->port_siblings); + mpt2sas_port->num_phys--; + sas_port_delete_phy(mpt2sas_port->port, mpt2sas_phy->phy); + mpt2sas_phy->phy_belongs_to_port = 0; +} + +/** + * _transport_add_phy - helper function to adding single phy to port + * @ioc: per adapter object + * @mpt2sas_port: mpt2sas per port object + * @mpt2sas_phy: mpt2sas per phy object * - * The reason we would hit this issue is becuase someone is changing the - * sas address of a device on the fly, meanwhile controller firmware sends - * EVENTs out of order when removing the previous instance of the device. + * Returns nothing. */ static void -_transport_delete_duplicate_port(struct MPT2SAS_ADAPTER *ioc, - struct _sas_node *sas_node, u64 sas_address, int phy_num) +_transport_add_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_port *mpt2sas_port, + struct _sas_phy *mpt2sas_phy) { - struct _sas_port *mpt2sas_port, *mpt2sas_port_duplicate; - struct _sas_phy *mpt2sas_phy; + u64 sas_address = mpt2sas_port->remote_identify.sas_address; - printk(MPT2SAS_ERR_FMT "new device located at sas_addr(0x%016llx), " - "phy_id(%d)\n", ioc->name, (unsigned long long)sas_address, - phy_num); + dev_printk(KERN_INFO, &mpt2sas_phy->phy->dev, + "add: sas_addr(0x%016llx), phy(%d)\n", (unsigned long long) + sas_address, mpt2sas_phy->phy_id); - mpt2sas_port_duplicate = NULL; - list_for_each_entry(mpt2sas_port, &sas_node->sas_port_list, port_list) { - dev_printk(KERN_ERR, &mpt2sas_port->port->dev, - "existing device at sas_addr(0x%016llx), num_phys(%d)\n", - (unsigned long long) - mpt2sas_port->remote_identify.sas_address, - mpt2sas_port->num_phys); - list_for_each_entry(mpt2sas_phy, &mpt2sas_port->phy_list, + list_add_tail(&mpt2sas_phy->port_siblings, &mpt2sas_port->phy_list); + mpt2sas_port->num_phys++; + sas_port_add_phy(mpt2sas_port->port, mpt2sas_phy->phy); + mpt2sas_phy->phy_belongs_to_port = 1; +} + +/** + * _transport_add_phy_to_an_existing_port - adding new phy to existing port + * @ioc: per adapter object + * @sas_node: sas node object (either expander or sas host) + * @mpt2sas_phy: mpt2sas per phy object + * @sas_address: sas address of device/expander were phy needs to be added to + * + * Returns nothing. + */ +static void +_transport_add_phy_to_an_existing_port(struct MPT2SAS_ADAPTER *ioc, +struct _sas_node *sas_node, struct _sas_phy *mpt2sas_phy, u64 sas_address) +{ + struct _sas_port *mpt2sas_port; + struct _sas_phy *phy_srch; + + if (mpt2sas_phy->phy_belongs_to_port == 1) + return; + + list_for_each_entry(mpt2sas_port, &sas_node->sas_port_list, + port_list) { + if (mpt2sas_port->remote_identify.sas_address != + sas_address) + continue; + list_for_each_entry(phy_srch, &mpt2sas_port->phy_list, port_siblings) { - dev_printk(KERN_ERR, &mpt2sas_phy->phy->dev, - "phy_number(%d)\n", mpt2sas_phy->phy_id); - if (mpt2sas_phy->phy_id == phy_num) - mpt2sas_port_duplicate = mpt2sas_port; + if (phy_srch == mpt2sas_phy) + return; } + _transport_add_phy(ioc, mpt2sas_port, mpt2sas_phy); + return; } - if (!mpt2sas_port_duplicate) +} + +/** + * _transport_del_phy_from_an_existing_port - delete phy from existing port + * @ioc: per adapter object + * @sas_node: sas node object (either expander or sas host) + * @mpt2sas_phy: mpt2sas per phy object + * + * Returns nothing. + */ +static void +_transport_del_phy_from_an_existing_port(struct MPT2SAS_ADAPTER *ioc, + struct _sas_node *sas_node, struct _sas_phy *mpt2sas_phy) +{ + struct _sas_port *mpt2sas_port, *next; + struct _sas_phy *phy_srch; + + if (mpt2sas_phy->phy_belongs_to_port == 0) return; - dev_printk(KERN_ERR, &mpt2sas_port_duplicate->port->dev, - "deleting duplicate device at sas_addr(0x%016llx), phy(%d)!!!!\n", - (unsigned long long) - mpt2sas_port_duplicate->remote_identify.sas_address, phy_num); - ioc->logging_level |= MPT_DEBUG_TRANSPORT; - mpt2sas_transport_port_remove(ioc, - mpt2sas_port_duplicate->remote_identify.sas_address, - sas_node->sas_address); - ioc->logging_level &= ~MPT_DEBUG_TRANSPORT; + list_for_each_entry_safe(mpt2sas_port, next, &sas_node->sas_port_list, + port_list) { + list_for_each_entry(phy_srch, &mpt2sas_port->phy_list, + port_siblings) { + if (phy_srch != mpt2sas_phy) + continue; + if (mpt2sas_port->num_phys == 1) + _transport_delete_port(ioc, mpt2sas_port); + else + _transport_delete_phy(ioc, mpt2sas_port, + mpt2sas_phy); + return; + } + } } /** @@ -537,11 +624,13 @@ _transport_sanity_check(struct MPT2SAS_ADAPTER *ioc, struct _sas_node *sas_node, { int i; - for (i = 0; i < sas_node->num_phys; i++) - if (sas_node->phy[i].remote_identify.sas_address == sas_address) - if (sas_node->phy[i].phy_belongs_to_port) - _transport_delete_duplicate_port(ioc, sas_node, - sas_address, i); + for (i = 0; i < sas_node->num_phys; i++) { + if (sas_node->phy[i].remote_identify.sas_address != sas_address) + continue; + if (sas_node->phy[i].phy_belongs_to_port == 1) + _transport_del_phy_from_an_existing_port(ioc, sas_node, + &sas_node->phy[i]); + } } /** @@ -905,10 +994,12 @@ mpt2sas_transport_update_links(struct MPT2SAS_ADAPTER *ioc, mpt2sas_phy = &sas_node->phy[phy_number]; mpt2sas_phy->attached_handle = handle; - if (handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) + if (handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) { _transport_set_identify(ioc, handle, &mpt2sas_phy->remote_identify); - else + _transport_add_phy_to_an_existing_port(ioc, sas_node, + mpt2sas_phy, mpt2sas_phy->remote_identify.sas_address); + } else memset(&mpt2sas_phy->remote_identify, 0 , sizeof(struct sas_identify)); -- cgit v1.2.1