From e3bbff9f3cf91c84c76cfdd5e80041ad1b487192 Mon Sep 17 00:00:00 2001 From: Sumant Patro Date: Tue, 3 Oct 2006 12:28:49 -0700 Subject: [SCSI] megaraid_sas: FW transition and q size changes This patch has the following enhancements : a. handles new transition states of FW to support controller hotplug. b. It reduces by 1 the maximum cmds that the driver may send to FW. c. Sends "Stop Processing" cmd to FW before returning failure from reset routine d. Adds print in megasas_transition routine e. Sends "RESET" flag to FW to do a soft reset of controller to move from Operational to Ready state. f. Sending correct pointer (cmd->sense) to pci_pool_free Signed-off-by: Sumant Patro Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas.c | 35 +++++++++++++++++++++++++++++------ drivers/scsi/megaraid/megaraid_sas.h | 11 +++++++++-- 2 files changed, 38 insertions(+), 8 deletions(-) (limited to 'drivers/scsi/megaraid') diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 4cab5b534b25..38733b6009a4 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -832,6 +832,12 @@ static int megasas_wait_for_outstanding(struct megasas_instance *instance) } if (atomic_read(&instance->fw_outstanding)) { + /* + * Send signal to FW to stop processing any pending cmds. + * The controller will be taken offline by the OS now. + */ + writel(MFI_STOP_ADP, + &instance->reg_set->inbound_doorbell); instance->hw_crit_error = 1; return FAILED; } @@ -1229,10 +1235,12 @@ megasas_transition_to_ready(struct megasas_instance* instance) fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK; + if (fw_state != MFI_STATE_READY) + printk(KERN_INFO "megasas: Waiting for FW to come to ready" + " state\n"); + while (fw_state != MFI_STATE_READY) { - printk(KERN_INFO "megasas: Waiting for FW to come to ready" - " state\n"); switch (fw_state) { case MFI_STATE_FAULT: @@ -1244,19 +1252,27 @@ megasas_transition_to_ready(struct megasas_instance* instance) /* * Set the CLR bit in inbound doorbell */ - writel(MFI_INIT_CLEAR_HANDSHAKE, + writel(MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG, &instance->reg_set->inbound_doorbell); max_wait = 2; cur_state = MFI_STATE_WAIT_HANDSHAKE; break; + case MFI_STATE_BOOT_MESSAGE_PENDING: + writel(MFI_INIT_HOTPLUG, + &instance->reg_set->inbound_doorbell); + + max_wait = 10; + cur_state = MFI_STATE_BOOT_MESSAGE_PENDING; + break; + case MFI_STATE_OPERATIONAL: /* - * Bring it to READY state; assuming max wait 2 secs + * Bring it to READY state; assuming max wait 10 secs */ megasas_disable_intr(instance); - writel(MFI_INIT_READY, &instance->reg_set->inbound_doorbell); + writel(MFI_RESET_FLAGS, &instance->reg_set->inbound_doorbell); max_wait = 10; cur_state = MFI_STATE_OPERATIONAL; @@ -1323,6 +1339,7 @@ megasas_transition_to_ready(struct megasas_instance* instance) return -ENODEV; } }; + printk(KERN_INFO "megasas: FW now in Ready state\n"); return 0; } @@ -1352,7 +1369,7 @@ static void megasas_teardown_frame_pool(struct megasas_instance *instance) cmd->frame_phys_addr); if (cmd->sense) - pci_pool_free(instance->sense_dma_pool, cmd->frame, + pci_pool_free(instance->sense_dma_pool, cmd->sense, cmd->sense_phys_addr); } @@ -1690,6 +1707,12 @@ static int megasas_init_mfi(struct megasas_instance *instance) * Get various operational parameters from status register */ instance->max_fw_cmds = instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF; + /* + * Reduce the max supported cmds by 1. This is to ensure that the + * reply_q_sz (1 more than the max cmd that driver may send) + * does not exceed max cmds that the FW can support + */ + instance->max_fw_cmds = instance->max_fw_cmds-1; instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >> 0x10; /* diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 3531a14222a7..930c06d0a4f7 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -50,6 +50,7 @@ #define MFI_STATE_WAIT_HANDSHAKE 0x60000000 #define MFI_STATE_FW_INIT_2 0x70000000 #define MFI_STATE_DEVICE_SCAN 0x80000000 +#define MFI_STATE_BOOT_MESSAGE_PENDING 0x90000000 #define MFI_STATE_FLUSH_CACHE 0xA0000000 #define MFI_STATE_READY 0xB0000000 #define MFI_STATE_OPERATIONAL 0xC0000000 @@ -64,12 +65,18 @@ * READY : Move from OPERATIONAL to READY state; discard queue info * MFIMODE : Discard (possible) low MFA posted in 64-bit mode (??) * CLR_HANDSHAKE: FW is waiting for HANDSHAKE from BIOS or Driver + * HOTPLUG : Resume from Hotplug + * MFI_STOP_ADP : Send signal to FW to stop processing */ -#define MFI_INIT_ABORT 0x00000000 +#define MFI_INIT_ABORT 0x00000001 #define MFI_INIT_READY 0x00000002 #define MFI_INIT_MFIMODE 0x00000004 #define MFI_INIT_CLEAR_HANDSHAKE 0x00000008 -#define MFI_RESET_FLAGS MFI_INIT_READY|MFI_INIT_MFIMODE +#define MFI_INIT_HOTPLUG 0x00000010 +#define MFI_STOP_ADP 0x00000020 +#define MFI_RESET_FLAGS MFI_INIT_READY| \ + MFI_INIT_MFIMODE| \ + MFI_INIT_ABORT /** * MFI frame flags -- cgit v1.2.1