From e88267e1646037fa2c155515c78bd01a5c81f058 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Thu, 9 Jul 2009 17:52:30 +0800 Subject: regulator: replace ADTV1 register by ADTV2 in da903x In PXA3xx SoC family, V_CORE power doamin is supplied by BUCK1 that is controller by ADTV1 or ADTV2 register. By default, v1 and v2 has the same copy. If v1 or v2 is updated, the last value that is written to either register takes effect. It means that v1 and v2 has different copy. And the actual voltage output is determinated by last update on either register. DA9034/35 is binded with PXA3xx SoC family. While SoC is scaling OP or entering/exiting lower power mode, SoC needs to change voltage of V_CORE power doamin. In order to be efficient, POWER I2C (hardcode) mode could be enabled in SoC. In this mode, SoC will control v2 register directly. In original DA903x driver, software will only read regulator data from v1 register. But SoC controls v2 register directly. It results that v1 and v2 isn't synchronized. Wrong data will be read from v1 register. So access v2 register in da903x driver instead. Signed-off-by: Haojian Zhuang Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/da903x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c index 49081b44bf52..d8d251f066a4 100644 --- a/drivers/regulator/da903x.c +++ b/drivers/regulator/da903x.c @@ -469,9 +469,9 @@ static struct da903x_regulator_info da903x_regulator_info[] = { DA9030_LDO(13, 2100, 2100, 0, INVAL, 0, 0, RCTL11, 3), /* fixed @2.1V */ /* DA9034 */ - DA9034_DVC(BUCK1, 725, 1500, 25, ADTV1, 5, VCC1, 0, OVER1, 0), - DA9034_DVC(BUCK2, 725, 1500, 25, CDTV1, 5, VCC1, 2, OVER1, 1), - DA9034_DVC(LDO2, 725, 1500, 25, SDTV1, 5, VCC1, 4, OVER1, 2), + DA9034_DVC(BUCK1, 725, 1500, 25, ADTV2, 5, VCC1, 0, OVER1, 0), + DA9034_DVC(BUCK2, 725, 1500, 25, CDTV2, 5, VCC1, 2, OVER1, 1), + DA9034_DVC(LDO2, 725, 1500, 25, SDTV2, 5, VCC1, 4, OVER1, 2), DA9034_DVC(LDO1, 1700, 2075, 25, MDTV1, 4, VCC1, 6, OVER3, 4), DA9034_LDO( 3, 1800, 3300, 100, LDO643, 0, 4, OVER3, 5), -- cgit v1.2.1