From 9bf8a1a79d549a0cf3b26c88d1ac8cdf07deafee Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 23 Jun 2008 20:33:06 +0200 Subject: pci: debug extra pci resources range Signed-off-by: Ingo Molnar --- drivers/pci/probe.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 3706ce7972dd..27cdbb06c4dd 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -275,6 +275,7 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) } res->start = l64 & PCI_BASE_ADDRESS_MEM_MASK; res->end = res->start + sz64; + printk(KERN_INFO "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n", pci_name(dev), reg, res->start, res->end); #else if (sz64 > 0x100000000ULL) { printk(KERN_ERR "PCI: Unable to handle 64-bit " @@ -290,6 +291,8 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) res->end = sz; } #endif + } else { + printk(KERN_INFO "PCI: %s reg %x %s: [%llx, %llx]\n", pci_name(dev), reg, (res->flags & IORESOURCE_IO)? "io port":"32bit mmio", res->start, res->end); } } if (rom) { @@ -357,6 +360,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->start = base; if (!res->end) res->end = limit + 0xfff; + printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", pci_name(dev), res->start, res->end); } res = child->resource[1]; @@ -368,6 +372,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM; res->start = base; res->end = limit + 0xfffff; + printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), res->start, res->end); } res = child->resource[2]; @@ -402,6 +407,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH; res->start = base; res->end = limit + 0xfffff; + printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64)?"64":"32",res->start, res->end); } } -- cgit v1.2.1 From 76fbc263ff7e42ce8b21b8aee176e3c74b45f81a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 23 Jun 2008 20:33:06 +0200 Subject: pci: debug extra pci bus resources Signed-off-by: Ingo Molnar --- drivers/pci/setup-bus.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 8ddb918f5f57..c74a2bce083d 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -537,6 +537,36 @@ void __ref pci_bus_assign_resources(struct pci_bus *bus) } EXPORT_SYMBOL(pci_bus_assign_resources); +static void pci_bus_dump_res(struct pci_bus *bus) +{ + int i; + + for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) { + struct resource *res = bus->resource[i]; + if (!res) + continue; + + printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n", bus->number, i, (res->flags & IORESOURCE_IO)? "io port":"mmio", res->start, res->end); + } +} + +static void pci_bus_dump_resources(struct pci_bus *bus) +{ + struct pci_bus *b; + struct pci_dev *dev; + + + pci_bus_dump_res(bus); + + list_for_each_entry(dev, &bus->devices, bus_list) { + b = dev->subordinate; + if (!b) + continue; + + pci_bus_dump_resources(b); + } +} + void __init pci_assign_unassigned_resources(void) { @@ -552,4 +582,9 @@ pci_assign_unassigned_resources(void) pci_bus_assign_resources(bus); pci_enable_bridges(bus); } + + /* dump the resource on buses */ + list_for_each_entry(bus, &pci_root_buses, node) { + pci_bus_dump_resources(bus); + } } -- cgit v1.2.1 From e0d94beead4ef652ec1c066be886140eebb06d8b Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 11 Aug 2008 17:47:40 +0200 Subject: PCI: acpi_pcihp: run _OSC on a root bridge _OSC should be ran on a root bridge instead of the device itself. Do this before touching OSHP since PCI fw specs states that _OSC should be preferred over OSHP (however if the device has OSHP but not _OSC -- not a root bridge -- it's not). Cc: kristen.c.accardi@intel.com Acked-by: Alex Chiang Signed-off-by: Jiri Slaby Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/acpi_pcihp.c | 41 ++++++++++++++++++++++++++++------------ 1 file changed, 29 insertions(+), 12 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c index 93e37f0666ab..bd831970f00b 100644 --- a/drivers/pci/hotplug/acpi_pcihp.c +++ b/drivers/pci/hotplug/acpi_pcihp.c @@ -382,7 +382,7 @@ EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware); int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags) { acpi_status status; - acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev)); + acpi_handle chandle, handle; struct pci_dev *pdev = dev; struct pci_bus *parent; struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL }; @@ -399,10 +399,28 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags) * Per PCI firmware specification, we should run the ACPI _OSC * method to get control of hotplug hardware before using it. If * an _OSC is missing, we look for an OSHP to do the same thing. - * To handle different BIOS behavior, we look for _OSC and OSHP - * within the scope of the hotplug controller and its parents, + * To handle different BIOS behavior, we look for _OSC on a root + * bridge preferentially (according to PCI fw spec). Later for + * OSHP within the scope of the hotplug controller and its parents, * upto the host bridge under which this controller exists. */ + while (pdev->bus->self) + pdev = pdev->bus->self; + handle = acpi_get_pci_rootbridge_handle(pci_domain_nr(pdev->bus), + pdev->bus->number); + if (handle) { + acpi_get_name(handle, ACPI_FULL_PATHNAME, &string); + dbg("Trying to get hotplug control for %s\n", + (char *)string.pointer); + status = pci_osc_control_set(handle, flags); + if (ACPI_SUCCESS(status)) + goto got_one; + kfree(string.pointer); + string = (struct acpi_buffer){ ACPI_ALLOCATE_BUFFER, NULL }; + } + + pdev = dev; + handle = DEVICE_ACPI_HANDLE(&dev->dev); while (!handle) { /* * This hotplug controller was not listed in the ACPI name @@ -427,15 +445,9 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags) acpi_get_name(handle, ACPI_FULL_PATHNAME, &string); dbg("Trying to get hotplug control for %s \n", (char *)string.pointer); - status = pci_osc_control_set(handle, flags); - if (status == AE_NOT_FOUND) - status = acpi_run_oshp(handle); - if (ACPI_SUCCESS(status)) { - dbg("Gained control for hotplug HW for pci %s (%s)\n", - pci_name(dev), (char *)string.pointer); - kfree(string.pointer); - return 0; - } + status = acpi_run_oshp(handle); + if (ACPI_SUCCESS(status)) + goto got_one; if (acpi_root_bridge(handle)) break; chandle = handle; @@ -449,6 +461,11 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags) kfree(string.pointer); return -ENODEV; +got_one: + dbg("Gained control for hotplug HW for pci %s (%s)\n", pci_name(dev), + (char *)string.pointer); + kfree(string.pointer); + return 0; } EXPORT_SYMBOL(acpi_get_hp_hw_control_from_firmware); -- cgit v1.2.1 From 056c58e8eb4d6765214757e541b68095e2eb2bd2 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 18 Aug 2008 20:22:54 +0200 Subject: PCI: add acpi_find_root_bridge_handle Consolidate finding of a root bridge and getting its handle to the one inline function. It's cut & pasted on multiple places. Use this new inline in those. Cc: kristen.c.accardi@intel.com Acked-by: Alex Chiang Signed-off-by: Jiri Slaby Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/acpi_pcihp.c | 5 +---- drivers/pci/pcie/aer/aerdrv_acpi.c | 7 +------ 2 files changed, 2 insertions(+), 10 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c index bd831970f00b..e17ef54f0efc 100644 --- a/drivers/pci/hotplug/acpi_pcihp.c +++ b/drivers/pci/hotplug/acpi_pcihp.c @@ -404,10 +404,7 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags) * OSHP within the scope of the hotplug controller and its parents, * upto the host bridge under which this controller exists. */ - while (pdev->bus->self) - pdev = pdev->bus->self; - handle = acpi_get_pci_rootbridge_handle(pci_domain_nr(pdev->bus), - pdev->bus->number); + handle = acpi_find_root_bridge_handle(pdev); if (handle) { acpi_get_name(handle, ACPI_FULL_PATHNAME, &string); dbg("Trying to get hotplug control for %s\n", diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c index 30f581b8791f..6dd7b13e9808 100644 --- a/drivers/pci/pcie/aer/aerdrv_acpi.c +++ b/drivers/pci/pcie/aer/aerdrv_acpi.c @@ -36,12 +36,7 @@ int aer_osc_setup(struct pcie_device *pciedev) if (acpi_pci_disabled) return -1; - /* Find root host bridge */ - while (pdev->bus->self) - pdev = pdev->bus->self; - handle = acpi_get_pci_rootbridge_handle( - pci_domain_nr(pdev->bus), pdev->bus->number); - + handle = acpi_find_root_bridge_handle(pdev); if (handle) { pcie_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT); status = pci_osc_control_set(handle, -- cgit v1.2.1 From 167e782e301188c7c7e31e486bbeea5f918324c1 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Thu, 21 Aug 2008 15:13:29 -0600 Subject: PCI: pciehp: Rename duplicate slot name N as N-1, N-2, N-M... Commit 3800345f723fd130d50434d4717b99d4a9f383c8 (pciehp: fix slot name) introduces the pciehp_slot_with_bus module parameter, which was intended to help work around broken firmware that assigns the same name to multiple slots. Commit 9e4f2e8d4ddb04ad16a3828cd9a369a5a5287009 (pciehp: add message about pciehp_slot_with_bus option) tells the user to use the above parameter in the event of a name collision. This approach is sub-optimal because it requires too much work from the user. Instead, let's rename the slot on behalf of the user. If firmware assigns the name N to multiple slots, then: The first registered slot is assigned N The second registered slot is assigned N-1 The third registered slot is assigned N-2 The Mth registered slot becomes N-M In the event we overflow the slot->name parameter, we report an error to the user. This is a temporary fix until the entire PCI core can be reworked such that individual drivers no longer have to manage their own slot names. Tested-by: Kenji Kaneshige Acked-by: Kenji Kaneshige Signed-off-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp.h | 1 - drivers/pci/hotplug/pciehp_core.c | 21 ++++++++++++++------- drivers/pci/hotplug/pciehp_hpc.c | 11 +---------- 3 files changed, 15 insertions(+), 18 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index e3a1e7e7dba2..9e6cec67e1cc 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -43,7 +43,6 @@ extern int pciehp_poll_mode; extern int pciehp_poll_time; extern int pciehp_debug; extern int pciehp_force; -extern int pciehp_slot_with_bus; extern struct workqueue_struct *pciehp_wq; #define dbg(format, arg...) \ diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 3677495c4f91..4fd5355bc3b5 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -41,7 +41,6 @@ int pciehp_debug; int pciehp_poll_mode; int pciehp_poll_time; int pciehp_force; -int pciehp_slot_with_bus; struct workqueue_struct *pciehp_wq; #define DRIVER_VERSION "0.4" @@ -56,12 +55,10 @@ module_param(pciehp_debug, bool, 0644); module_param(pciehp_poll_mode, bool, 0644); module_param(pciehp_poll_time, int, 0644); module_param(pciehp_force, bool, 0644); -module_param(pciehp_slot_with_bus, bool, 0644); MODULE_PARM_DESC(pciehp_debug, "Debugging mode enabled or not"); MODULE_PARM_DESC(pciehp_poll_mode, "Using polling mechanism for hot-plug events or not"); MODULE_PARM_DESC(pciehp_poll_time, "Polling mechanism frequency, in seconds"); MODULE_PARM_DESC(pciehp_force, "Force pciehp, even if _OSC and OSHP are missing"); -MODULE_PARM_DESC(pciehp_slot_with_bus, "Use bus number in the slot name"); #define PCIE_MODULE_NAME "pciehp" @@ -194,6 +191,7 @@ static int init_slots(struct controller *ctrl) struct slot *slot; struct hotplug_slot *hotplug_slot; struct hotplug_slot_info *info; + int len, dup = 1; int retval = -ENOMEM; list_for_each_entry(slot, &ctrl->slot_list, slot_list) { @@ -220,15 +218,24 @@ static int init_slots(struct controller *ctrl) dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x " "slot_device_offset=%x\n", slot->bus, slot->device, slot->hp_slot, slot->number, ctrl->slot_device_offset); +duplicate_name: retval = pci_hp_register(hotplug_slot, ctrl->pci_dev->subordinate, slot->device); if (retval) { + /* + * If slot N already exists, we'll try to create + * slot N-1, N-2 ... N-M, until we overflow. + */ + if (retval == -EEXIST) { + len = snprintf(slot->name, SLOT_NAME_SIZE, + "%d-%d", slot->number, dup++); + if (len < SLOT_NAME_SIZE) + goto duplicate_name; + else + err("duplicate slot name overflow\n"); + } err("pci_hp_register failed with error %d\n", retval); - if (retval == -EEXIST) - err("Failed to register slot because of name " - "collision. Try \'pciehp_slot_with_bus\' " - "module option.\n"); goto error_info; } /* create additional sysfs entries */ diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index ad27e9e225a6..ab31f5ba665d 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -1030,15 +1030,6 @@ static void pcie_shutdown_notification(struct controller *ctrl) pciehp_free_irq(ctrl); } -static void make_slot_name(struct slot *slot) -{ - if (pciehp_slot_with_bus) - snprintf(slot->name, SLOT_NAME_SIZE, "%04d_%04d", - slot->bus, slot->number); - else - snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number); -} - static int pcie_init_slot(struct controller *ctrl) { struct slot *slot; @@ -1053,7 +1044,7 @@ static int pcie_init_slot(struct controller *ctrl) slot->device = ctrl->slot_device_offset + slot->hp_slot; slot->hpc_ops = ctrl->hpc_ops; slot->number = ctrl->first_slot; - make_slot_name(slot); + snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number); mutex_init(&slot->lock); INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work); list_add(&slot->slot_list, &ctrl->slot_list); -- cgit v1.2.1 From d6a9e9b40be7da84f82eb414c2ad98c5bb69986b Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Thu, 21 Aug 2008 15:13:47 -0600 Subject: PCI: shpchp: Rename duplicate slot name N as N-1, N-2, N-M... Commit ef0ff95f136f0f2d035667af5d18b824609de320 (shpchp: fix slot name) introduces the shpchp_slot_with_bus module parameter, which was intended to help work around broken firmware that assigns the same name to multiple slots. Commit b3bd307c628af2f0a581c42d5d7e4bcdbbf64b6a (shpchp: add message about shpchp_slot_with_bus option) tells the user to use the above parameter in the event of a name collision. This approach is sub-optimal because it requires too much work from the user. Instead, let's rename the slot on behalf of the user. If firmware assigns the name N to multiple slots, then: The first registered slot is assigned N The second registered slot is assigned N-1 The third registered slot is assigned N-2 The Mth registered slot becomes N-M In the event we overflow the slot->name parameter, we report an error to the user. This is a temporary fix until the entire PCI core can be reworked such that individual drivers no longer have to manage their own slot names. Tested-by: Kenji Kaneshige Acked-by: Kenji Kaneshige Signed-off-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/shpchp_core.c | 34 +++++++++++++++------------------- 1 file changed, 15 insertions(+), 19 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index a8cbd039b85b..cc38615395f1 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -39,7 +39,6 @@ int shpchp_debug; int shpchp_poll_mode; int shpchp_poll_time; -static int shpchp_slot_with_bus; struct workqueue_struct *shpchp_wq; #define DRIVER_VERSION "0.4" @@ -53,11 +52,9 @@ MODULE_LICENSE("GPL"); module_param(shpchp_debug, bool, 0644); module_param(shpchp_poll_mode, bool, 0644); module_param(shpchp_poll_time, int, 0644); -module_param(shpchp_slot_with_bus, bool, 0644); MODULE_PARM_DESC(shpchp_debug, "Debugging mode enabled or not"); MODULE_PARM_DESC(shpchp_poll_mode, "Using polling mechanism for hot-plug events or not"); MODULE_PARM_DESC(shpchp_poll_time, "Polling mechanism frequency, in seconds"); -MODULE_PARM_DESC(shpchp_slot_with_bus, "Use bus number in the slot name"); #define SHPC_MODULE_NAME "shpchp" @@ -99,23 +96,13 @@ static void release_slot(struct hotplug_slot *hotplug_slot) kfree(slot); } -static void make_slot_name(struct slot *slot) -{ - if (shpchp_slot_with_bus) - snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%04d_%04d", - slot->bus, slot->number); - else - snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%d", - slot->number); -} - static int init_slots(struct controller *ctrl) { struct slot *slot; struct hotplug_slot *hotplug_slot; struct hotplug_slot_info *info; int retval = -ENOMEM; - int i; + int i, len, dup = 1; for (i = 0; i < ctrl->num_slots; i++) { slot = kzalloc(sizeof(*slot), GFP_KERNEL); @@ -146,7 +133,7 @@ static int init_slots(struct controller *ctrl) /* register this slot with the hotplug pci core */ hotplug_slot->private = slot; hotplug_slot->release = &release_slot; - make_slot_name(slot); + snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number); hotplug_slot->ops = &shpchp_hotplug_slot_ops; get_power_status(hotplug_slot, &info->power_status); @@ -157,14 +144,23 @@ static int init_slots(struct controller *ctrl) dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x " "slot_device_offset=%x\n", slot->bus, slot->device, slot->hp_slot, slot->number, ctrl->slot_device_offset); +duplicate_name: retval = pci_hp_register(slot->hotplug_slot, ctrl->pci_dev->subordinate, slot->device); if (retval) { + /* + * If slot N already exists, we'll try to create + * slot N-1, N-2 ... N-M, until we overflow. + */ + if (retval == -EEXIST) { + len = snprintf(slot->name, SLOT_NAME_SIZE, + "%d-%d", slot->number, dup++); + if (len < SLOT_NAME_SIZE) + goto duplicate_name; + else + err("duplicate slot name overflow\n"); + } err("pci_hp_register failed with error %d\n", retval); - if (retval == -EEXIST) - err("Failed to register slot because of name " - "collision. Try \'shpchp_slot_with_bus\' " - "module option.\n"); goto error_info; } -- cgit v1.2.1 From ebca4f1bce1eb7b91a63c515db66316db9391221 Mon Sep 17 00:00:00 2001 From: Greg KH Date: Thu, 21 Aug 2008 13:47:58 -0700 Subject: PCI: fix reference leak in pci_get_dev_by_id() Alex Chiang and Matthew Wilcox pointed out that pci_get_dev_by_id() does not properly decrement the reference on the from pointer if it is present, like the documentation for the function states it will. It fixes a pretty bad leak in the hotplug core (we were leaking an entire struct pci_dev for each function of each offlined card, the first time around; subsequent onlines/offlines were ok). Cc: Matthew Wilcox Cc: stable Tested-by: Alex Chiang Acked-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman Signed-off-by: Jesse Barnes --- drivers/pci/search.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/search.c b/drivers/pci/search.c index 217814fef4ef..3b3b5f178797 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -280,6 +280,8 @@ static struct pci_dev *pci_get_dev_by_id(const struct pci_device_id *id, match_pci_dev_by_id); if (dev) pdev = to_pci_dev(dev); + if (from) + pci_dev_put(from); return pdev; } -- cgit v1.2.1 From 5f17cfce5776c566d64430f543a289e5cfa4538b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 4 Sep 2008 01:33:59 -0700 Subject: PCI: fix pbus_size_mem() resource alignment for CardBus controllers Commit 884525655d07fdee9245716b998ecdc45cdd8007 ("PCI: clean up resource alignment management") changed the resource handling to mark how a resource was aligned on a per-resource basis. Thus, instead of looking at the resource number to determine whether it was a bridge resource or a regular resource (they have different alignment rules), we should just ask the resource for its alignment directly. The reason this broke only cardbus resources was that for the other types of resources, the old way of deciding alignment actually still happened to work. But CardBus bridge resources had been changed by commit 934b7024f0ed29003c95cef447d92737ab86dc4f ("Fix cardbus resource allocation") to look more like regular resources than PCI bridge resources from an alignment handling standpoint. Reported-and-tested-by: Andrew Morton Cc: Ivan Kokshaysky Cc: Jesse Barnes Signed-off-by: Linus Torvalds --- drivers/pci/setup-bus.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 82634a2f1b1d..1aad599816f7 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -352,11 +352,12 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long continue; r_size = r->end - r->start + 1; /* For bridges size != alignment */ - align = (i < PCI_BRIDGE_RESOURCES) ? r_size : r->start; + align = resource_alignment(r); order = __ffs(align) - 20; if (order > 11) { - dev_warn(&dev->dev, "BAR %d too large: " + dev_warn(&dev->dev, "BAR %d bad alignment %llx: " "%#016llx-%#016llx\n", i, + (unsigned long long)align, (unsigned long long)r->start, (unsigned long long)r->end); r->flags = 0; -- cgit v1.2.1