From bb9e44d0d0f45da356c39e485edacff6e14ba961 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 21 Mar 2012 00:39:12 +0000 Subject: e1000e: prevent oops when adapter is being closed and reset simultaneously When the adapter is closed while it is simultaneously going through a reset, it can cause a null-pointer dereference when the two different code paths simultaneously cleanup up the Tx/Rx resources. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/e1000.h | 6 ++++++ drivers/net/ethernet/intel/e1000e/netdev.c | 9 +++++++++ 2 files changed, 15 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 86cdd4793992..b83897f76ee3 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -161,6 +161,12 @@ struct e1000_info; /* Time to wait before putting the device into D3 if there's no link (in ms). */ #define LINK_TIMEOUT 100 +/* + * Count for polling __E1000_RESET condition every 10-20msec. + * Experimentation has shown the reset can take approximately 210msec. + */ +#define E1000_CHECK_RESET_COUNT 25 + #define DEFAULT_RDTR 0 #define DEFAULT_RADV 8 #define BURST_RDTR 0x20 diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 2c38a65ade87..6878601f20c5 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3968,6 +3968,10 @@ static int e1000_close(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct pci_dev *pdev = adapter->pdev; + int count = E1000_CHECK_RESET_COUNT; + + while (test_bit(__E1000_RESETTING, &adapter->state) && count--) + usleep_range(10000, 20000); WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); @@ -5472,6 +5476,11 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, netif_device_detach(netdev); if (netif_running(netdev)) { + int count = E1000_CHECK_RESET_COUNT; + + while (test_bit(__E1000_RESETTING, &adapter->state) && count--) + usleep_range(10000, 20000); + WARN_ON(test_bit(__E1000_RESETTING, &adapter->state)); e1000e_down(adapter); e1000_free_irq(adapter); -- cgit v1.2.1