From 8edf3fd6eb0649b0f19363baf23bca39c6fbdba4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 28 May 2013 21:32:47 +0200 Subject: iwlwifi: don't print module loading error if not modular MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the opmode modules aren't modular, there's no point in printing an error message that request_module() failed. This will happen because the probe runs during iwlwifi's init and the opmode is only added during its init. Reported-by: Jörg Otte Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-drv.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index 39aad9893e0b..40fed1f511e2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -1000,10 +1000,12 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context) */ if (load_module) { err = request_module("%s", op->name); +#ifdef CONFIG_IWLWIFI_OPMODE_MODULAR if (err) IWL_ERR(drv, "failed to load module %s (error %d), is dynamic loading enabled?\n", op->name, err); +#endif } return; -- cgit v1.2.1 From b28b6dfe580ab1ab8bf08b908fd69e299b877103 Mon Sep 17 00:00:00 2001 From: Nikolay Martynov Date: Fri, 31 May 2013 01:29:12 -0400 Subject: iwlwifi: dvm: fix chain noise calibration First step of chain noise calibration process had disable flag check inverted. Chain noise calibration never started because of this. Tested on intel 5300 with two antennas attached. The driver correctly disabled one chain. Cc: stable@vger.kernel.org Signed-off-by: Nikolay Martynov Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/rxon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c index 707446fa00bd..cd1ad0019185 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rxon.c +++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c @@ -1378,7 +1378,7 @@ static void iwlagn_chain_noise_reset(struct iwl_priv *priv) struct iwl_chain_noise_data *data = &priv->chain_noise_data; int ret; - if (!(priv->calib_disabled & IWL_CHAIN_NOISE_CALIB_DISABLED)) + if (priv->calib_disabled & IWL_CHAIN_NOISE_CALIB_DISABLED) return; if ((data->state == IWL_CHAIN_NOISE_ALIVE) && -- cgit v1.2.1 From 2edc6ec6330c7906f4dbd7f5da71be8989efc5a3 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 2 Jun 2013 19:49:15 +0300 Subject: iwlwifi: mvm: correctly set the flags for BAR Somehow, the Tx flags for BAR were completely wrong. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/tx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c index f212f16502ff..48c1891e3df6 100644 --- a/drivers/net/wireless/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -180,7 +180,8 @@ static void iwl_mvm_set_tx_cmd_rate(struct iwl_mvm *mvm, tx_cmd->tx_flags |= cpu_to_le32(TX_CMD_FLG_STA_RATE); return; } else if (ieee80211_is_back_req(fc)) { - tx_cmd->tx_flags |= cpu_to_le32(TX_CMD_FLG_STA_RATE); + tx_cmd->tx_flags |= + cpu_to_le32(TX_CMD_FLG_ACK | TX_CMD_FLG_BAR); } /* HT rate doesn't make sense for a non data frame */ -- cgit v1.2.1 From 622ebe994f6866b8d46ee5d3bcc329ed65d3722d Mon Sep 17 00:00:00 2001 From: Moshe Benji Date: Mon, 3 Jun 2013 19:27:16 +0300 Subject: iwlwifi: fix rate control regression Since driver does not use control.rates[0].count, we have never set that variable. But currently, after rate control API rewrite, this is required by mac80211. Otherwise legacy rates control does not work and we transmit always at 1Mbit/s on pre 11n networks. [same fix as for iwlegacy, thanks Stanislaw!] Signed-off-by: Moshe Benji Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/rs.c | 2 +- drivers/net/wireless/iwlwifi/mvm/rs.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c index 907bd6e50aad..10fbb176cc8e 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rs.c +++ b/drivers/net/wireless/iwlwifi/dvm/rs.c @@ -2799,7 +2799,7 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta, info->control.rates[0].flags = 0; } info->control.rates[0].idx = rate_idx; - + info->control.rates[0].count = 1; } static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta, diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index 55334d542e26..b99fe3163866 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -2546,6 +2546,7 @@ static void rs_get_rate(void *mvm_r, struct ieee80211_sta *sta, void *mvm_sta, info->control.rates[0].flags = 0; } info->control.rates[0].idx = rate_idx; + info->control.rates[0].count = 1; } static void *rs_alloc_sta(void *mvm_rate, struct ieee80211_sta *sta, -- cgit v1.2.1 From a8cf0194b7187fb65dfff28a1c5153d442e3836a Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 4 Jun 2013 14:19:10 +0200 Subject: iwlegacy: fix rate control regression Since driver does not use control.rates[0].count, we have never set that variable. But currently, after rate control API rewrite, this is required by mac80211. Otherwise legacy rates control does not work and we transmit always at 1Mbit/s on pre 11n networks. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/3945-rs.c | 1 + drivers/net/wireless/iwlegacy/4965-rs.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlegacy/3945-rs.c b/drivers/net/wireless/iwlegacy/3945-rs.c index c9f197d9ca1e..fe31590a51b2 100644 --- a/drivers/net/wireless/iwlegacy/3945-rs.c +++ b/drivers/net/wireless/iwlegacy/3945-rs.c @@ -816,6 +816,7 @@ out: rs_sta->last_txrate_idx = idx; info->control.rates[0].idx = rs_sta->last_txrate_idx; } + info->control.rates[0].count = 1; D_RATE("leave: %d\n", idx); } diff --git a/drivers/net/wireless/iwlegacy/4965-rs.c b/drivers/net/wireless/iwlegacy/4965-rs.c index 1fc0b227e120..ed3c42a63a43 100644 --- a/drivers/net/wireless/iwlegacy/4965-rs.c +++ b/drivers/net/wireless/iwlegacy/4965-rs.c @@ -2268,7 +2268,7 @@ il4965_rs_get_rate(void *il_r, struct ieee80211_sta *sta, void *il_sta, info->control.rates[0].flags = 0; } info->control.rates[0].idx = rate_idx; - + info->control.rates[0].count = 1; } static void * -- cgit v1.2.1 From 541e667e1c0f31a7e11d909eb831cf476814a201 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Thu, 6 Jun 2013 13:29:56 +0200 Subject: brcmsmac: disable power-save related functions This patch fixes a regression introduced by: commit 6da3b6c48d79da96a36c2632053cf4f53bf48fb2 Author: Hauke Mehrtens Date: Sun Mar 24 01:45:52 2013 +0100 brcmsmac: remove brcms_bss_cfg->associated The regression behaviour was described on mailing list. http://mid.gmane.org/5197DC4F.7030503@broadcom.com: "On laptop I installed kernel with brcmsmac compiled as module. It comes up and associates during boot, but after logging in there is no connectivity. Triggering reassoc gives connectivity for some time, but after a while (1-2 min) it stops." Before the mentioned commit the return value of the function brcms_c_ps_allowed() was always false, which is desired behaviour as power-save is not supported at the moment. Therefor, the function is changed to just return false instead of simply reverting the mentioned commit. Bug: 58471 Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/main.c | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 28e7aeedd184..9fd6f2fef11b 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -3074,21 +3074,8 @@ static void brcms_b_antsel_set(struct brcms_hardware *wlc_hw, u32 antsel_avail) */ static bool brcms_c_ps_allowed(struct brcms_c_info *wlc) { - /* disallow PS when one of the following global conditions meets */ - if (!wlc->pub->associated) - return false; - - /* disallow PS when one of these meets when not scanning */ - if (wlc->filter_flags & FIF_PROMISC_IN_BSS) - return false; - - if (wlc->bsscfg->type == BRCMS_TYPE_AP) - return false; - - if (wlc->bsscfg->type == BRCMS_TYPE_ADHOC) - return false; - - return true; + /* not supporting PS so always return false for now */ + return false; } static void brcms_c_statsupd(struct brcms_c_info *wlc) -- cgit v1.2.1 From 8c8d2017ba25c510ddf093419048460db1109bc4 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 11 Jun 2013 18:48:53 +0200 Subject: rt2800: fix RT5390 & RT3290 TX power settings regression My change: commit cee2c7315f60beeff6137ee59e99acc77d636eeb Author: Stanislaw Gruszka Date: Fri Oct 5 13:44:09 2012 +0200 rt2800: use BBP_R1 for setting tx power unfortunately does not work well with RT5390 and RT3290 chips as they require different temperature compensation TX power settings (TSSI tuning). Since that commit make wireless connection very unstable on those chips, restore previous behavior to fix regression. Once we implement proper TSSI tuning on 5390/3290 we can restore back setting TX power by BBP_R1 register for those chips. Reported-and-tested-by: Mike Romberg Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index b52d70c75e1a..72f32e5caa4d 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -3027,19 +3027,26 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, * TODO: we do not use +6 dBm option to do not increase power beyond * regulatory limit, however this could be utilized for devices with * CAPABILITY_POWER_LIMIT. + * + * TODO: add different temperature compensation code for RT3290 & RT5390 + * to allow to use BBP_R1 for those chips. */ - rt2800_bbp_read(rt2x00dev, 1, &r1); - if (delta <= -12) { - power_ctrl = 2; - delta += 12; - } else if (delta <= -6) { - power_ctrl = 1; - delta += 6; - } else { - power_ctrl = 0; + if (!rt2x00_rt(rt2x00dev, RT3290) && + !rt2x00_rt(rt2x00dev, RT5390)) { + rt2800_bbp_read(rt2x00dev, 1, &r1); + if (delta <= -12) { + power_ctrl = 2; + delta += 12; + } else if (delta <= -6) { + power_ctrl = 1; + delta += 6; + } else { + power_ctrl = 0; + } + rt2x00_set_field8(&r1, BBP1_TX_POWER_CTRL, power_ctrl); + rt2800_bbp_write(rt2x00dev, 1, r1); } - rt2x00_set_field8(&r1, BBP1_TX_POWER_CTRL, power_ctrl); - rt2800_bbp_write(rt2x00dev, 1, r1); + offset = TX_PWR_CFG_0; for (i = 0; i < EEPROM_TXPOWER_BYRATE_SIZE; i += 2) { -- cgit v1.2.1 From fcb3701849957917a234a61b58ad70ed35c83eda Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 7 Jun 2013 11:03:00 +0200 Subject: brcmfmac: free primary net_device when brcmf_bus_start() fails When initialization within brcmf_bus_start() fails on steps before the brcmf_net_attach() the net_device for the primary interface needs to be freed. This patch resolves a panic during kernel boot as reported by Stephen Warren. ref.: http://mid.gmane.org/51AD1F22.2080004@wwwdotorg.org Tested-by: Stephen Warren Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index b98f2235978e..2c593570497c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -930,6 +930,10 @@ fail: brcmf_fws_del_interface(ifp); brcmf_fws_deinit(drvr); } + if (drvr->iflist[0]) { + free_netdev(ifp->ndev); + drvr->iflist[0] = NULL; + } if (p2p_ifp) { free_netdev(p2p_ifp->ndev); drvr->iflist[1] = NULL; -- cgit v1.2.1