From dfa31fef5dd3d204c4cdae7369f3542bd1f7e84a Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 15 Nov 2010 15:11:26 +0100 Subject: carl9170: fix usb anchor wait timeout usb_wait_anchor_empty_timeout's @timeout wants milliseconds and not jiffies. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c index 3317039cd28f..7504ed14c725 100644 --- a/drivers/net/wireless/ath/carl9170/usb.c +++ b/drivers/net/wireless/ath/carl9170/usb.c @@ -553,12 +553,12 @@ static int carl9170_usb_flush(struct ar9170 *ar) usb_free_urb(urb); } - ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, HZ); + ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, 1000); if (ret == 0) err = -ETIMEDOUT; /* lets wait a while until the tx - queues are dried out */ - ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, HZ); + ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, 1000); if (ret == 0) err = -ETIMEDOUT; -- cgit v1.2.1 From e8364bb8d041c0fd92d69a17ff19f535e1d1c187 Mon Sep 17 00:00:00 2001 From: Vivek Natarajan Date: Wed, 10 Nov 2010 15:11:07 +0530 Subject: ath9k: Remove pm_qos request after hw unregister. Update pm_qos before removing it in deinit_device to prevent this warning: pm_qos_update_request() called for unknown object. Signed-off-by: Vivek Natarajan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/init.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 6a0d99eff404..92bc5c5f4876 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -817,8 +817,6 @@ void ath9k_deinit_device(struct ath_softc *sc) ath9k_ps_wakeup(sc); - pm_qos_remove_request(&ath9k_pm_qos_req); - wiphy_rfkill_stop_polling(sc->hw->wiphy); ath_deinit_leds(sc); @@ -832,6 +830,7 @@ void ath9k_deinit_device(struct ath_softc *sc) } ieee80211_unregister_hw(hw); + pm_qos_remove_request(&ath9k_pm_qos_req); ath_rx_cleanup(sc); ath_tx_cleanup(sc); ath9k_deinit_softc(sc); -- cgit v1.2.1 From 32b089558c54792028f14ae830ca7c0a8d9ac9a3 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 10 Nov 2010 17:51:24 +0530 Subject: ath9k_htc: Update usb device ID list Added new VID/PIDs into supported devices list Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index f7ec31b4ddd3..0e1227769e9f 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -36,8 +36,13 @@ static struct usb_device_id ath9k_hif_usb_ids[] = { { USB_DEVICE(0x13D3, 0x3327) }, /* Azurewave */ { USB_DEVICE(0x13D3, 0x3328) }, /* Azurewave */ { USB_DEVICE(0x13D3, 0x3346) }, /* IMC Networks */ + { USB_DEVICE(0x13D3, 0x3348) }, /* Azurewave */ + { USB_DEVICE(0x13D3, 0x3349) }, /* Azurewave */ + { USB_DEVICE(0x13D3, 0x3350) }, /* Azurewave */ { USB_DEVICE(0x04CA, 0x4605) }, /* Liteon */ { USB_DEVICE(0x083A, 0xA704) }, /* SMC Networks */ + { USB_DEVICE(0x040D, 0x3801) }, /* VIA */ + { USB_DEVICE(0x1668, 0x1200) }, /* Verizon */ { }, }; -- cgit v1.2.1 From 7cbf2611dac8d5f76fe64795a9426b8c97e6c3f8 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 10 Nov 2010 17:51:25 +0530 Subject: ath9k_htc: Add new devices into AR7010 Treat new PIDs (0xA704, 0x1200) as AR7010 devices. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 4 ++++ drivers/net/wireless/ath/ath9k/htc_drv_init.c | 2 ++ drivers/net/wireless/ath/ath9k/reg.h | 4 +++- 3 files changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 0e1227769e9f..dfb6560dab92 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -811,6 +811,8 @@ static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev) case 0x7010: case 0x7015: case 0x9018: + case 0xA704: + case 0x1200: firm_offset = AR7010_FIRMWARE_TEXT; break; default: @@ -933,6 +935,8 @@ static int ath9k_hif_usb_probe(struct usb_interface *interface, case 0x7010: case 0x7015: case 0x9018: + case 0xA704: + case 0x1200: if (le16_to_cpu(udev->descriptor.bcdDevice) == 0x0202) hif_dev->fw_name = FIRMWARE_AR7010_1_1; else diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index 3d7b97f1b3ae..7c8a38d04561 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -249,6 +249,8 @@ static int ath9k_init_htc_services(struct ath9k_htc_priv *priv, u16 devid) case 0x7010: case 0x7015: case 0x9018: + case 0xA704: + case 0x1200: priv->htc->credits = 45; break; default: diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index fa05b711e5cd..52ee82d6796b 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -866,7 +866,9 @@ #define AR_DEVID_7010(_ah) \ (((_ah)->hw_version.devid == 0x7010) || \ ((_ah)->hw_version.devid == 0x7015) || \ - ((_ah)->hw_version.devid == 0x9018)) + ((_ah)->hw_version.devid == 0x9018) || \ + ((_ah)->hw_version.devid == 0xA704) || \ + ((_ah)->hw_version.devid == 0x1200)) #define AR_RADIO_SREV_MAJOR 0xf0 #define AR_RAD5133_SREV_MAJOR 0xc0 -- cgit v1.2.1 From b5261cf4f3860bd772346a3e692683b6144dd44c Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Wed, 10 Nov 2010 17:51:26 +0530 Subject: ath9k_hw: Set proper eeprom offset for AR9287 HTC devices AR9287 based PCI & USB devices are differed in eeprom start offset. So set proper the offset for HTC devices to read nvram correctly. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/eeprom_9287.c | 2 +- drivers/net/wireless/ath/ath9k/reg.h | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c index 966b9496a9dd..195406db3bd8 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c @@ -37,7 +37,7 @@ static bool ath9k_hw_ar9287_fill_eeprom(struct ath_hw *ah) int addr, eep_start_loc; eep_data = (u16 *)eep; - if (ah->hw_version.devid == 0x7015) + if (AR9287_HTC_DEVID(ah)) eep_start_loc = AR9287_HTC_EEP_START_LOC; else eep_start_loc = AR9287_EEP_START_LOC; diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 52ee82d6796b..dddf579aacf1 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -870,6 +870,10 @@ ((_ah)->hw_version.devid == 0xA704) || \ ((_ah)->hw_version.devid == 0x1200)) +#define AR9287_HTC_DEVID(_ah) \ + (((_ah)->hw_version.devid == 0x7015) || \ + ((_ah)->hw_version.devid == 0x1200)) + #define AR_RADIO_SREV_MAJOR 0xf0 #define AR_RAD5133_SREV_MAJOR 0xc0 #define AR_RAD2133_SREV_MAJOR 0xd0 -- cgit v1.2.1 From 451a3c24b0135bce54542009b5fde43846c7cf67 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 17 Nov 2010 16:26:55 +0100 Subject: BKL: remove extraneous #include The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- drivers/net/wireless/orinoco/orinoco_usb.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c index a38a7bd25f19..b9aedf18a046 100644 --- a/drivers/net/wireless/orinoco/orinoco_usb.c +++ b/drivers/net/wireless/orinoco/orinoco_usb.c @@ -57,7 +57,6 @@ #include #include #include -#include #include #include -- cgit v1.2.1 From 3bf30b56c4f0a1c4fae34050b7db4527c92891e8 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Thu, 18 Nov 2010 12:19:52 +0530 Subject: ath9k_htc: Avoid setting QoS control for non-QoS frames Setting tid information in the TX header is required only for QoS frames. Not handling this case causes severe data loss with some APs. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c index 3d19b5bc937f..29d80ca78393 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c @@ -121,7 +121,7 @@ int ath9k_htc_tx_start(struct ath9k_htc_priv *priv, struct sk_buff *skb) tx_hdr.data_type = ATH9K_HTC_NORMAL; } - if (ieee80211_is_data(fc)) { + if (ieee80211_is_data_qos(fc)) { qc = ieee80211_get_qos_ctl(hdr); tx_hdr.tidno = qc[0] & IEEE80211_QOS_CTL_TID_MASK; } -- cgit v1.2.1 From d47844a014fada1a788719f6426bc7044f2a0fd8 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 20 Nov 2010 03:08:47 +0100 Subject: ath9k: fix timeout on stopping rx dma It seems that using ath9k_hw_stoppcurecv to stop rx dma is not enough. When it's time to stop DMA, the PCU is still busy, so the rx enable bit never clears. Using ath9k_hw_abortpcurecv helps with getting rx stopped much faster, with this change, I cannot reproduce the rx stop related WARN_ON anymore. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index c76ea53c20ce..1a62e351ec77 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -518,7 +518,7 @@ bool ath_stoprecv(struct ath_softc *sc) bool stopped; spin_lock_bh(&sc->rx.rxbuflock); - ath9k_hw_stoppcurecv(ah); + ath9k_hw_abortpcurecv(ah); ath9k_hw_setrxfilter(ah, 0); stopped = ath9k_hw_stopdmarecv(ah); -- cgit v1.2.1 From b397492a8c1022887a9b2fb925fe92e69ce0ad4d Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 20 Nov 2010 13:15:27 +0100 Subject: carl9170: fix virtual interface setup crash This patch fixes a faulty bound check which caused a crash when too many virtual interface were brought up. BUG: unable to handle kernel NULL pointer dereference at 00000004 IP: [] carl9170_op_add_interface+0x1d7/0x2c0 [carl9170] *pde = 00000000 Oops: 0002 [#1] PREEMPT Modules linked in: carl9170 [...] Pid: 4720, comm: wpa_supplicant Not tainted 2.6.37-rc2-wl+ EIP: 0060:[] EFLAGS: 00210206 CPU: 0 EIP is at carl9170_op_add_interface+0x1d7/0x2c0 [carl9170] EAX: 00000000 ... Process wpa_supplicant Stack: f4f88f34 fffffff4 .. Call Trace: [] ? ieee80211_do_open+0x406/0x5c0 [mac80211] [...] Code: <89> 42 04 ... EIP: [] carl9170_op_add_interface+0x1d7/0x2c0 [carl9170] CR2: 0000000000000004 Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 980ae70ea424..a314c2c2bfbe 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -647,7 +647,7 @@ init: } unlock: - if (err && (vif_id != -1)) { + if (err && (vif_id >= 0)) { vif_priv->active = false; bitmap_release_region(&ar->vif_bitmap, vif_id, 0); ar->vifs--; -- cgit v1.2.1 From e476a5a41ad67d0e2b4a652820c49a3923eb936b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 23 Nov 2010 17:10:24 +0100 Subject: wireless: b43: fix error path in SDIO Fix unbalanced call to sdio_release_host() on the error path. Signed-off-by: Guennadi Liakhovetski Acked-by: Larry Finger Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/b43/sdio.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/b43/sdio.c b/drivers/net/wireless/b43/sdio.c index 9a55338d957f..09e2dfd7b175 100644 --- a/drivers/net/wireless/b43/sdio.c +++ b/drivers/net/wireless/b43/sdio.c @@ -163,6 +163,7 @@ static int b43_sdio_probe(struct sdio_func *func, err_free_ssb: kfree(sdio); err_disable_func: + sdio_claim_host(func); sdio_disable_func(func); err_release_host: sdio_release_host(func); -- cgit v1.2.1 From 517ff43146b17a0d067125f098f675d1e0ac2d82 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 24 Nov 2010 16:00:49 +0000 Subject: libertas: fix memory corruption in lbs_remove_card() "priv" is stored at the end of the wiphy structure, which is freed during the call to lbs_cfg_free(). It must not be touched afterwards. Remove the unnecessary NULL assignment causing this memory corruption. Signed-off-by: Daniel Drake Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/main.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 46b88b118c99..fcd1bbfc632d 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -915,8 +915,6 @@ void lbs_remove_card(struct lbs_private *priv) lbs_free_adapter(priv); lbs_cfg_free(priv); - - priv->dev = NULL; free_netdev(dev); lbs_deb_leave(LBS_DEB_MAIN); -- cgit v1.2.1 From 16ccdf0dbc84b11bc8b7fdbad66804d06a683554 Mon Sep 17 00:00:00 2001 From: Sven Neumann Date: Wed, 24 Nov 2010 16:02:00 +0000 Subject: libertas: fix invalid access card->priv must not be accessed after lbs_remove_card() was called as lbs_remove_card() frees card->priv via free_netdev(). For libertas_sdio this is a regression introduced by 23b149c1890f9. The correct fix to the issue described there is simply to remove the assignment. This flag is set at the appropriate time inside lbs_remove_card anyway. Reported-by: Daniel Drake Signed-off-by: Sven Neumann Signed-off-by: Daniel Drake Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/if_sdio.c | 1 - drivers/net/wireless/libertas/if_spi.c | 1 - 2 files changed, 2 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index e5685dc317a8..b4de0ca10feb 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -1170,7 +1170,6 @@ static void if_sdio_remove(struct sdio_func *func) lbs_deb_sdio("call remove card\n"); lbs_stop_card(card->priv); lbs_remove_card(card->priv); - card->priv->surpriseremoved = 1; flush_workqueue(card->workqueue); destroy_workqueue(card->workqueue); diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c index 79bcb4e5d2ca..ecd4d04b2c3c 100644 --- a/drivers/net/wireless/libertas/if_spi.c +++ b/drivers/net/wireless/libertas/if_spi.c @@ -1055,7 +1055,6 @@ static int __devexit libertas_spi_remove(struct spi_device *spi) lbs_stop_card(priv); lbs_remove_card(priv); /* will call free_netdev */ - priv->surpriseremoved = 1; free_irq(spi->irq, card); if_spi_terminate_spi_thread(card); if (card->pdata->teardown) -- cgit v1.2.1 From 98c316e348bedffa730e6f1e4baeb8a3c3e0f28b Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 25 Nov 2010 18:26:07 +0100 Subject: ath9k: use per-device struct for pm_qos_* operations The ath9k driver uses a shared pm_qos_request_list structure for all devices. This causes the following warning if more than one device is present in the system: WARNING: at kernel/pm_qos_params.c:234 ath9k_init_device+0x5e8/0x6b0() pm_qos_add_request() called for already added request Modules linked in: Call Trace: [<802b1cdc>] dump_stack+0x8/0x34 [<8007dd90>] warn_slowpath_common+0x78/0xa4 [<8007de44>] warn_slowpath_fmt+0x2c/0x38 [<801b0828>] ath9k_init_device+0x5e8/0x6b0 [<801bc508>] ath_pci_probe+0x2dc/0x39c [<80176254>] pci_device_probe+0x64/0xa4 [<8019471c>] driver_probe_device+0xbc/0x188 [<80194854>] __driver_attach+0x6c/0xa4 [<80193e20>] bus_for_each_dev+0x60/0xb0 [<80193580>] bus_add_driver+0xcc/0x268 [<80194c08>] driver_register+0xe0/0x198 [<801764e0>] __pci_register_driver+0x50/0xe0 [<80365f48>] ath9k_init+0x3c/0x6c [<8006050c>] do_one_initcall+0xfc/0x1d8 [<80355340>] kernel_init+0xd4/0x174 [<800639a4>] kernel_thread_helper+0x10/0x18 ---[ end trace 5345fc6f870564a6 ]--- This patch fixes that warning by using a separate pm_qos_request_list sructure for each device. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 4 +++- drivers/net/wireless/ath/ath9k/init.c | 7 ++----- drivers/net/wireless/ath/ath9k/main.c | 5 ++--- 3 files changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 170d44a35ccb..0d0bec3628ec 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -21,6 +21,7 @@ #include #include #include +#include #include "debug.h" #include "common.h" @@ -646,6 +647,8 @@ struct ath_softc { struct ath_descdma txsdma; struct ath_ant_comb ant_comb; + + struct pm_qos_request_list pm_qos_req; }; struct ath_wiphy { @@ -675,7 +678,6 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz) } extern struct ieee80211_ops ath9k_ops; -extern struct pm_qos_request_list ath9k_pm_qos_req; extern int modparam_nohwcrypt; extern int led_blink; diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 92bc5c5f4876..c29eea26a777 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -15,7 +15,6 @@ */ #include -#include #include "ath9k.h" @@ -180,8 +179,6 @@ static const struct ath_ops ath9k_common_ops = { .write = ath9k_iowrite32, }; -struct pm_qos_request_list ath9k_pm_qos_req; - /**************************/ /* Initialization */ /**************************/ @@ -759,7 +756,7 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid, ath_init_leds(sc); ath_start_rfkill_poll(sc); - pm_qos_add_request(&ath9k_pm_qos_req, PM_QOS_CPU_DMA_LATENCY, + pm_qos_add_request(&sc->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, PM_QOS_DEFAULT_VALUE); return 0; @@ -830,7 +827,7 @@ void ath9k_deinit_device(struct ath_softc *sc) } ieee80211_unregister_hw(hw); - pm_qos_remove_request(&ath9k_pm_qos_req); + pm_qos_remove_request(&sc->pm_qos_req); ath_rx_cleanup(sc); ath_tx_cleanup(sc); ath9k_deinit_softc(sc); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 25d3ef4c338e..1cdbdbe33ab5 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -15,7 +15,6 @@ */ #include -#include #include "ath9k.h" #include "btcoex.h" @@ -1244,7 +1243,7 @@ static int ath9k_start(struct ieee80211_hw *hw) ath9k_btcoex_timer_resume(sc); } - pm_qos_update_request(&ath9k_pm_qos_req, 55); + pm_qos_update_request(&sc->pm_qos_req, 55); mutex_unlock: mutex_unlock(&sc->mutex); @@ -1423,7 +1422,7 @@ static void ath9k_stop(struct ieee80211_hw *hw) sc->sc_flags |= SC_OP_INVALID; - pm_qos_update_request(&ath9k_pm_qos_req, PM_QOS_DEFAULT_VALUE); + pm_qos_update_request(&sc->pm_qos_req, PM_QOS_DEFAULT_VALUE); mutex_unlock(&sc->mutex); -- cgit v1.2.1 From c426ee247e40a70490f3d67d3c9c7d1aba54516f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 26 Nov 2010 11:38:04 +0100 Subject: ath9k/carl9170: advertise P2P With some upcoming changes we'd like to use the interface types for P2P capability tests. Enable them now so that when we add those tests in wpa_supplicant, nothing will break. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/init.c | 2 ++ drivers/net/wireless/ath/carl9170/fw.c | 3 ++- drivers/net/wireless/ath/carl9170/main.c | 3 ++- 3 files changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index c29eea26a777..14b8ab386daf 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -661,6 +661,8 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) hw->flags |= IEEE80211_HW_MFP_CAPABLE; hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_P2P_GO) | + BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_AP) | BIT(NL80211_IFTYPE_WDS) | BIT(NL80211_IFTYPE_STATION) | diff --git a/drivers/net/wireless/ath/carl9170/fw.c b/drivers/net/wireless/ath/carl9170/fw.c index ae6c006bbc56..546b4e4ec5ea 100644 --- a/drivers/net/wireless/ath/carl9170/fw.c +++ b/drivers/net/wireless/ath/carl9170/fw.c @@ -291,7 +291,8 @@ static int carl9170_fw(struct ar9170 *ar, const __u8 *data, size_t len) if (SUPP(CARL9170FW_WLANTX_CAB)) { ar->hw->wiphy->interface_modes |= - BIT(NL80211_IFTYPE_AP); + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_P2P_GO); } } diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index a314c2c2bfbe..dc7b30b170d0 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1631,7 +1631,8 @@ void *carl9170_alloc(size_t priv_size) * supports these modes. The code which will add the * additional interface_modes is in fw.c. */ - hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_P2P_CLIENT); hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_REPORTS_TX_ACK_STATUS | -- cgit v1.2.1 From 46047784b8cdcfc916f6c1cccee0c18dd1223dfd Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Fri, 26 Nov 2010 23:24:31 +0530 Subject: ath9k: Disable SWBA interrupt on remove_interface while removing beaconing mode interface, SWBA interrupt was never disabled when there are no other beaconing interfaces. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 1cdbdbe33ab5..dace215b693e 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1519,6 +1519,7 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, struct ath_softc *sc = aphy->sc; struct ath_common *common = ath9k_hw_common(sc->sc_ah); struct ath_vif *avp = (void *)vif->drv_priv; + bool bs_valid = false; int i; ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n"); @@ -1547,7 +1548,15 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, "slot\n", __func__); sc->beacon.bslot[i] = NULL; sc->beacon.bslot_aphy[i] = NULL; - } + } else if (sc->beacon.bslot[i]) + bs_valid = true; + } + if (!bs_valid && (sc->sc_ah->imask & ATH9K_INT_SWBA)) { + /* Disable SWBA interrupt */ + sc->sc_ah->imask &= ~ATH9K_INT_SWBA; + ath9k_ps_wakeup(sc); + ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask); + ath9k_ps_restore(sc); } sc->nvifs--; -- cgit v1.2.1 From 5c5e138b590a748c57d54b39634cda974ab9af1d Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 26 Nov 2010 23:29:23 +0100 Subject: carl9170: fix carl9170_tx_prepare typo commit: "carl9170: revamp carl9170_tx_prepare" introduced a peculiar bug that would only show up if the the module parameter noht is set to 1. Then all outbound voice, video and background frames would each invoke a (bogus) RTS/CTS handshake. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c index b575c865142d..7e6506a77bbb 100644 --- a/drivers/net/wireless/ath/carl9170/tx.c +++ b/drivers/net/wireless/ath/carl9170/tx.c @@ -810,7 +810,7 @@ static int carl9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb) mac_tmp = cpu_to_le16(AR9170_TX_MAC_HW_DURATION | AR9170_TX_MAC_BACKOFF); - mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) && + mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) & AR9170_TX_MAC_QOS); no_ack = !!(info->flags & IEEE80211_TX_CTL_NO_ACK); -- cgit v1.2.1 From cf63495d0dbe435b475a44672f5dee150da6471b Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Wed, 24 Nov 2010 20:33:02 +0000 Subject: orinoco: abort scan on interface down This fixes the problem causing the following trace: ------------[ cut here ]------------ WARNING: at linux-2.6.34/net/wireless/core.c:633 wdev_cleanup_work+0xb7/0xe0 [cfg80211]() Hardware name: Latitude C840 Pid: 707, comm: cfg80211 Not tainted 2.6.34.7-0.5-desktop #1 Call Trace: [] try_stack_unwind+0x173/0x190 [] dump_trace+0x3f/0xe0 [] show_trace_log_lvl+0x4b/0x60 [] show_trace+0x18/0x20 [] dump_stack+0x6d/0x72 [] warn_slowpath_common+0x6e/0xb0 [] warn_slowpath_null+0x13/0x20 [] wdev_cleanup_work+0xb7/0xe0 [cfg80211] [] run_workqueue+0x79/0x170 [] worker_thread+0x83/0xe0 [] kthread+0x74/0x80 [] kernel_thread_helper+0x6/0x10 ---[ end trace 3f0348b3b0c6f4ff ]--- Reported by: Giacomo Comes Signed-off-by: David Kilroy Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/main.c | 12 +++++------- drivers/net/wireless/orinoco/scan.c | 8 ++++++++ drivers/net/wireless/orinoco/scan.h | 1 + 3 files changed, 14 insertions(+), 7 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c index e8e2d0f4763d..fa0cf744958f 100644 --- a/drivers/net/wireless/orinoco/main.c +++ b/drivers/net/wireless/orinoco/main.c @@ -1392,10 +1392,9 @@ static void orinoco_process_scan_results(struct work_struct *work) orinoco_add_hostscan_results(priv, buf, len); kfree(buf); - } else if (priv->scan_request) { + } else { /* Either abort or complete the scan */ - cfg80211_scan_done(priv->scan_request, (len < 0)); - priv->scan_request = NULL; + orinoco_scan_done(priv, (len < 0)); } spin_lock_irqsave(&priv->scan_lock, flags); @@ -1684,6 +1683,8 @@ static int __orinoco_down(struct orinoco_private *priv) hermes_write_regn(hw, EVACK, 0xffff); } + orinoco_scan_done(priv, true); + /* firmware will have to reassociate */ netif_carrier_off(dev); priv->last_linkstatus = 0xffff; @@ -1762,10 +1763,7 @@ void orinoco_reset(struct work_struct *work) orinoco_unlock(priv, &flags); /* Scanning support: Notify scan cancellation */ - if (priv->scan_request) { - cfg80211_scan_done(priv->scan_request, 1); - priv->scan_request = NULL; - } + orinoco_scan_done(priv, true); if (priv->hard_reset) { err = (*priv->hard_reset)(priv); diff --git a/drivers/net/wireless/orinoco/scan.c b/drivers/net/wireless/orinoco/scan.c index 4300d9db7d8c..86cb54c842e7 100644 --- a/drivers/net/wireless/orinoco/scan.c +++ b/drivers/net/wireless/orinoco/scan.c @@ -229,3 +229,11 @@ void orinoco_add_hostscan_results(struct orinoco_private *priv, priv->scan_request = NULL; } } + +void orinoco_scan_done(struct orinoco_private *priv, bool abort) +{ + if (priv->scan_request) { + cfg80211_scan_done(priv->scan_request, abort); + priv->scan_request = NULL; + } +} diff --git a/drivers/net/wireless/orinoco/scan.h b/drivers/net/wireless/orinoco/scan.h index 2dc4e046dbdb..27281fb0a6dc 100644 --- a/drivers/net/wireless/orinoco/scan.h +++ b/drivers/net/wireless/orinoco/scan.h @@ -16,5 +16,6 @@ void orinoco_add_extscan_result(struct orinoco_private *priv, void orinoco_add_hostscan_results(struct orinoco_private *dev, unsigned char *buf, size_t len); +void orinoco_scan_done(struct orinoco_private *priv, bool abort); #endif /* _ORINOCO_SCAN_H_ */ -- cgit v1.2.1 From 916448e77f6bcaaa7f13c3de0c3851783ae2bfd0 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Tue, 30 Nov 2010 20:15:39 +0530 Subject: ath9k: Fix STA disconnect issue due to received MIC failed bcast frames AR_RxKeyIdxValid will not be set for bcast/mcast frames and so relying this status for MIC failed frames is buggy. Due to this, MIC failure events for broadcast frames are not sent to supplicant resulted in AP disconnecting the STA. Able to pass Wifi Test case 5.2.18 with this fix. Cc: Stable (2.6.36+) Signed-off-by: Senthil Balasubramanian Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/mac.c | 3 +-- drivers/net/wireless/ath/ath9k/recv.c | 4 +++- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 8c13479b17cd..c996963ab339 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -703,8 +703,7 @@ int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds, rs->rs_phyerr = phyerr; } else if (ads.ds_rxstatus8 & AR_DecryptCRCErr) rs->rs_status |= ATH9K_RXERR_DECRYPT; - else if ((ads.ds_rxstatus8 & AR_MichaelErr) && - rs->rs_keyix != ATH9K_RXKEYIX_INVALID) + else if (ads.ds_rxstatus8 & AR_MichaelErr) rs->rs_status |= ATH9K_RXERR_MIC; else if (ads.ds_rxstatus8 & AR_KeyMiss) rs->rs_status |= ATH9K_RXERR_DECRYPT; diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 1a62e351ec77..14d479f8d8ac 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1049,9 +1049,11 @@ static void ath9k_rx_skb_postprocess(struct ath_common *common, int hdrlen, padpos, padsize; u8 keyix; __le16 fc; + bool is_mc; /* see if any padding is done by the hw and remove it */ hdr = (struct ieee80211_hdr *) skb->data; + is_mc = !!is_multicast_ether_addr(hdr->addr1); hdrlen = ieee80211_get_hdrlen_from_skb(skb); fc = hdr->frame_control; padpos = ath9k_cmn_padpos(hdr->frame_control); @@ -1072,7 +1074,7 @@ static void ath9k_rx_skb_postprocess(struct ath_common *common, keyix = rx_stats->rs_keyix; - if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error && + if ((is_mc || !(keyix == ATH9K_RXKEYIX_INVALID)) && !decrypt_error && ieee80211_has_protected(fc)) { rxs->flag |= RX_FLAG_DECRYPTED; } else if (ieee80211_has_protected(fc) -- cgit v1.2.1 From 9306990a656d9cfd8bf3586938012729c1f2ea50 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Tue, 30 Nov 2010 23:24:09 -0800 Subject: ath9k: Fix bug in reading input gpio state for ar9003 The register which gives input gpio state is 0x404c for ar9003, currently 0x4048 is wrongly used. This will disable RF and make it unusable on some of AR9003. Cc:stable@kernel.org Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 3 ++- drivers/net/wireless/ath/ath9k/reg.h | 6 ++++-- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 6ebc68bca91f..c7fbe25cc128 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2044,7 +2044,8 @@ u32 ath9k_hw_gpio_get(struct ath_hw *ah, u32 gpio) val = REG_READ(ah, AR7010_GPIO_IN); return (MS(val, AR7010_GPIO_IN_VAL) & AR_GPIO_BIT(gpio)) == 0; } else if (AR_SREV_9300_20_OR_LATER(ah)) - return MS_REG_READ(AR9300, gpio) != 0; + return (MS(REG_READ(ah, AR_GPIO_IN), AR9300_GPIO_IN_VAL) & + AR_GPIO_BIT(gpio)) != 0; else if (AR_SREV_9271(ah)) return MS_REG_READ(AR9271, gpio) != 0; else if (AR_SREV_9287_11_OR_LATER(ah)) diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index dddf579aacf1..2c6a22fbb0f0 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -984,11 +984,13 @@ enum { #define AR9287_GPIO_IN_VAL_S 11 #define AR9271_GPIO_IN_VAL 0xFFFF0000 #define AR9271_GPIO_IN_VAL_S 16 -#define AR9300_GPIO_IN_VAL 0x0001FFFF -#define AR9300_GPIO_IN_VAL_S 0 #define AR7010_GPIO_IN_VAL 0x0000FFFF #define AR7010_GPIO_IN_VAL_S 0 +#define AR_GPIO_IN 0x404c +#define AR9300_GPIO_IN_VAL 0x0001FFFF +#define AR9300_GPIO_IN_VAL_S 0 + #define AR_GPIO_OE_OUT (AR_SREV_9300_20_OR_LATER(ah) ? 0x4050 : 0x404c) #define AR_GPIO_OE_OUT_DRV 0x3 #define AR_GPIO_OE_OUT_DRV_NO 0x0 -- cgit v1.2.1 From e702ba18f25887c76d26c8a85cc1706463c62e9a Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 1 Dec 2010 19:07:46 +0100 Subject: ath9k_hw: fix endian issues with CTLs on AR9003 Parsing data using bitfields is messy, because it makes endian handling much harder. AR9002 and earlier got it right, AR9003 got it wrong. This might lead to either using too high or too low tx power values, depending on frequency and eeprom settings. Fix it by getting rid of the CTL related bitfields entirely and use masks instead. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 73 ++++++++++++++------------ drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 9 +--- drivers/net/wireless/ath/ath9k/eeprom.c | 6 +-- drivers/net/wireless/ath/ath9k/eeprom.h | 13 ++--- 4 files changed, 47 insertions(+), 54 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index c4182359bee4..a7b82f0085d2 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -55,6 +55,8 @@ #define SUB_NUM_CTL_MODES_AT_5G_40 2 /* excluding HT40, EXT-OFDM */ #define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */ +#define CTL(_tpower, _flag) ((_tpower) | ((_flag) << 6)) + static const struct ar9300_eeprom ar9300_default = { .eepromVersion = 2, .templateVersion = 2, @@ -290,20 +292,21 @@ static const struct ar9300_eeprom ar9300_default = { } }, .ctlPowerData_2G = { - { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } }, - { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } }, - { { {60, 1}, {60, 0}, {60, 0}, {60, 1} } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, + { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, - { { {60, 1}, {60, 0}, {0, 0}, {0, 0} } }, - { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } }, - { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } }, + { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, - { { {60, 0}, {60, 1}, {60, 1}, {60, 0} } }, - { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } }, - { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, - { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } }, - { { {60, 0}, {60, 1}, {60, 1}, {60, 1} } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } }, + { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } }, }, .modalHeader5G = { /* 4 idle,t1,t2,b (4 bits per setting) */ @@ -568,56 +571,56 @@ static const struct ar9300_eeprom ar9300_default = { .ctlPowerData_5G = { { { - {60, 1}, {60, 1}, {60, 1}, {60, 1}, - {60, 1}, {60, 1}, {60, 1}, {60, 0}, + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), } }, { { - {60, 1}, {60, 1}, {60, 1}, {60, 1}, - {60, 1}, {60, 1}, {60, 1}, {60, 0}, + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), } }, { { - {60, 0}, {60, 1}, {60, 0}, {60, 1}, - {60, 1}, {60, 1}, {60, 1}, {60, 1}, + CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1), + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), } }, { { - {60, 0}, {60, 1}, {60, 1}, {60, 0}, - {60, 1}, {60, 0}, {60, 0}, {60, 0}, + CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0), + CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0), } }, { { - {60, 1}, {60, 1}, {60, 1}, {60, 0}, - {60, 0}, {60, 0}, {60, 0}, {60, 0}, + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), + CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0), } }, { { - {60, 1}, {60, 1}, {60, 1}, {60, 1}, - {60, 1}, {60, 0}, {60, 0}, {60, 0}, + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), + CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0), } }, { { - {60, 1}, {60, 1}, {60, 1}, {60, 1}, - {60, 1}, {60, 1}, {60, 1}, {60, 1}, + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), } }, { { - {60, 1}, {60, 1}, {60, 0}, {60, 1}, - {60, 1}, {60, 1}, {60, 1}, {60, 0}, + CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1), + CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), } }, { { - {60, 1}, {60, 0}, {60, 1}, {60, 1}, - {60, 1}, {60, 1}, {60, 0}, {60, 1}, + CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1), + CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1), } }, } @@ -1827,9 +1830,9 @@ static u16 ar9003_hw_get_direct_edge_power(struct ar9300_eeprom *eep, struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G; if (is2GHz) - return ctl_2g[idx].ctlEdges[edge].tPower; + return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge]); else - return ctl_5g[idx].ctlEdges[edge].tPower; + return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge]); } static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep, @@ -1847,12 +1850,12 @@ static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep, if (is2GHz) { if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 1) < freq && - ctl_2g[idx].ctlEdges[edge - 1].flag) - return ctl_2g[idx].ctlEdges[edge - 1].tPower; + CTL_EDGE_FLAGS(ctl_2g[idx].ctlEdges[edge - 1])) + return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge - 1]); } else { if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 0) < freq && - ctl_5g[idx].ctlEdges[edge - 1].flag) - return ctl_5g[idx].ctlEdges[edge - 1].tPower; + CTL_EDGE_FLAGS(ctl_5g[idx].ctlEdges[edge - 1])) + return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge - 1]); } return AR9300_MAX_RATE_POWER; diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h index 3c533bb983c7..655b3033396c 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h @@ -261,17 +261,12 @@ struct cal_tgt_pow_ht { u8 tPow2x[14]; } __packed; -struct cal_ctl_edge_pwr { - u8 tPower:6, - flag:2; -} __packed; - struct cal_ctl_data_2g { - struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_2G]; + u8 ctlEdges[AR9300_NUM_BAND_EDGES_2G]; } __packed; struct cal_ctl_data_5g { - struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_5G]; + u8 ctlEdges[AR9300_NUM_BAND_EDGES_5G]; } __packed; struct ar9300_eeprom { diff --git a/drivers/net/wireless/ath/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c index 1266333f586d..2bbf94d0191e 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom.c +++ b/drivers/net/wireless/ath/ath9k/eeprom.c @@ -240,16 +240,16 @@ u16 ath9k_hw_get_max_edge_power(u16 freq, struct cal_ctl_edges *pRdEdgesPower, for (i = 0; (i < num_band_edges) && (pRdEdgesPower[i].bChannel != AR5416_BCHAN_UNUSED); i++) { if (freq == ath9k_hw_fbin2freq(pRdEdgesPower[i].bChannel, is2GHz)) { - twiceMaxEdgePower = pRdEdgesPower[i].tPower; + twiceMaxEdgePower = CTL_EDGE_TPOWER(pRdEdgesPower[i].ctl); break; } else if ((i > 0) && (freq < ath9k_hw_fbin2freq(pRdEdgesPower[i].bChannel, is2GHz))) { if (ath9k_hw_fbin2freq(pRdEdgesPower[i - 1].bChannel, is2GHz) < freq && - pRdEdgesPower[i - 1].flag) { + CTL_EDGE_FLAGS(pRdEdgesPower[i - 1].ctl)) { twiceMaxEdgePower = - pRdEdgesPower[i - 1].tPower; + CTL_EDGE_TPOWER(pRdEdgesPower[i - 1].ctl); } break; } diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h index dacb45e1b906..41ad1fe62527 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom.h +++ b/drivers/net/wireless/ath/ath9k/eeprom.h @@ -233,6 +233,9 @@ #define AR9287_CHECKSUM_LOCATION (AR9287_EEP_START_LOC + 1) +#define CTL_EDGE_TPOWER(_ctl) ((_ctl) & 0x3f) +#define CTL_EDGE_FLAGS(_ctl) (((_ctl) >> 6) & 0x03) + enum eeprom_param { EEP_NFTHRESH_5, EEP_NFTHRESH_2, @@ -535,18 +538,10 @@ struct cal_target_power_ht { u8 tPow2x[8]; } __packed; - -#ifdef __BIG_ENDIAN_BITFIELD -struct cal_ctl_edges { - u8 bChannel; - u8 flag:2, tPower:6; -} __packed; -#else struct cal_ctl_edges { u8 bChannel; - u8 tPower:6, flag:2; + u8 ctl; } __packed; -#endif struct cal_data_op_loop_ar9287 { u8 pwrPdg[2][5]; -- cgit v1.2.1 From f67e07eb3decd7840b621fba37fd600adfdf99f8 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 1 Dec 2010 19:07:47 +0100 Subject: ath9k_hw: fix more bitfield related endian issues A few LNA control related flags were also specified as a bitfields, however for some strange reason they were written in big-endian order this time. Fix this by using flags instead. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/eeprom.h | 14 ++++++++++---- drivers/net/wireless/ath/ath9k/eeprom_def.c | 11 ++++++----- 2 files changed, 16 insertions(+), 9 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h index 41ad1fe62527..dd59f09441a3 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom.h +++ b/drivers/net/wireless/ath/ath9k/eeprom.h @@ -236,6 +236,15 @@ #define CTL_EDGE_TPOWER(_ctl) ((_ctl) & 0x3f) #define CTL_EDGE_FLAGS(_ctl) (((_ctl) >> 6) & 0x03) +#define LNA_CTL_BUF_MODE BIT(0) +#define LNA_CTL_ISEL_LO BIT(1) +#define LNA_CTL_ISEL_HI BIT(2) +#define LNA_CTL_BUF_IN BIT(3) +#define LNA_CTL_FEM_BAND BIT(4) +#define LNA_CTL_LOCAL_BIAS BIT(5) +#define LNA_CTL_FORCE_XPA BIT(6) +#define LNA_CTL_USE_ANT1 BIT(7) + enum eeprom_param { EEP_NFTHRESH_5, EEP_NFTHRESH_2, @@ -381,10 +390,7 @@ struct modal_eep_header { u8 xatten2Margin[AR5416_MAX_CHAINS]; u8 ob_ch1; u8 db_ch1; - u8 useAnt1:1, - force_xpaon:1, - local_bias:1, - femBandSelectUsed:1, xlnabufin:1, xlnaisel:2, xlnabufmode:1; + u8 lna_ctl; u8 miscBits; u16 xpaBiasLvlFreq[3]; u8 futureModal[6]; diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c index 76b4d65472dd..526d7c933f7f 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_def.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c @@ -451,9 +451,10 @@ static void ath9k_hw_def_set_board_values(struct ath_hw *ah, ath9k_hw_analog_shift_rmw(ah, AR_AN_TOP2, AR_AN_TOP2_LOCALBIAS, AR_AN_TOP2_LOCALBIAS_S, - pModal->local_bias); + !!(pModal->lna_ctl & + LNA_CTL_LOCAL_BIAS)); REG_RMW_FIELD(ah, AR_PHY_XPA_CFG, AR_PHY_FORCE_XPA_CFG, - pModal->force_xpaon); + !!(pModal->lna_ctl & LNA_CTL_FORCE_XPA)); } REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH, @@ -1428,9 +1429,9 @@ static u8 ath9k_hw_def_get_num_ant_config(struct ath_hw *ah, num_ant_config = 1; - if (pBase->version >= 0x0E0D) - if (pModal->useAnt1) - num_ant_config += 1; + if (pBase->version >= 0x0E0D && + (pModal->lna_ctl & LNA_CTL_USE_ANT1)) + num_ant_config += 1; return num_ant_config; } -- cgit v1.2.1 From d89197c7f34934fbb0f96d938a0d6cfe0b8bcb1c Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 2 Dec 2010 14:10:58 -0500 Subject: Revert "ath9k: Fix STA disconnect issue due to received MIC failed bcast frames" This reverts commit 916448e77f6bcaaa7f13c3de0c3851783ae2bfd0. "As far as I can tell, either of these patches breaks multiple VIF scenarios. I'm not sure exactly why, but I had to revert this to get any of my interfaces to associate." -- Ben Greear http://marc.info/?l=linux-wireless&m=129123368719339&w=2 Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/mac.c | 3 ++- drivers/net/wireless/ath/ath9k/recv.c | 4 +--- 2 files changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index c996963ab339..8c13479b17cd 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -703,7 +703,8 @@ int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds, rs->rs_phyerr = phyerr; } else if (ads.ds_rxstatus8 & AR_DecryptCRCErr) rs->rs_status |= ATH9K_RXERR_DECRYPT; - else if (ads.ds_rxstatus8 & AR_MichaelErr) + else if ((ads.ds_rxstatus8 & AR_MichaelErr) && + rs->rs_keyix != ATH9K_RXKEYIX_INVALID) rs->rs_status |= ATH9K_RXERR_MIC; else if (ads.ds_rxstatus8 & AR_KeyMiss) rs->rs_status |= ATH9K_RXERR_DECRYPT; diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 14d479f8d8ac..1a62e351ec77 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -1049,11 +1049,9 @@ static void ath9k_rx_skb_postprocess(struct ath_common *common, int hdrlen, padpos, padsize; u8 keyix; __le16 fc; - bool is_mc; /* see if any padding is done by the hw and remove it */ hdr = (struct ieee80211_hdr *) skb->data; - is_mc = !!is_multicast_ether_addr(hdr->addr1); hdrlen = ieee80211_get_hdrlen_from_skb(skb); fc = hdr->frame_control; padpos = ath9k_cmn_padpos(hdr->frame_control); @@ -1074,7 +1072,7 @@ static void ath9k_rx_skb_postprocess(struct ath_common *common, keyix = rx_stats->rs_keyix; - if ((is_mc || !(keyix == ATH9K_RXKEYIX_INVALID)) && !decrypt_error && + if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error && ieee80211_has_protected(fc)) { rxs->flag |= RX_FLAG_DECRYPTED; } else if (ieee80211_has_protected(fc) -- cgit v1.2.1 From 841051602e3fa18ea468fe5a177aa92b6eb44b56 Mon Sep 17 00:00:00 2001 From: Matteo Croce Date: Fri, 3 Dec 2010 02:25:08 +0100 Subject: ath9k: fix bug in tx power The ath9k driver subtracts 3 dBm to the txpower as with two radios the signal power is doubled. The resulting value is assigned in an u16 which overflows and makes the card work at full power. Cc: stable@kernel.org Signed-off-by: Matteo Croce Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/eeprom_def.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c index 526d7c933f7f..a3ccb1b9638d 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_def.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c @@ -1063,15 +1063,19 @@ static void ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah, case 1: break; case 2: - scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN) + scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + else + scaledPower = 0; break; case 3: - scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN) + scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + else + scaledPower = 0; break; } - scaledPower = max((u16)0, scaledPower); - if (IS_CHAN_2GHZ(chan)) { numCtlModes = ARRAY_SIZE(ctlModesFor11g) - SUB_NUM_CTL_MODES_AT_2G_40; -- cgit v1.2.1 From 080e1a259acea10b6df8e2a8e49b47481940220a Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 5 Dec 2010 20:17:53 +0100 Subject: ath9k: fix a DMA related race condition on reset When ath_drain_all_txq fails to stop DMA, it issues a hw reset. This reset happens at a very problematic point in time, when the hardware rx path has not been stopped yet. This could lead to memory corruption, hardware hangs or other issues. To fix these issues, simply remove the reset entirely and check the tx DMA stop status to prevent problems with fast channel changes. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 2 +- drivers/net/wireless/ath/ath9k/main.c | 5 +++-- drivers/net/wireless/ath/ath9k/xmit.c | 22 ++++++---------------- 3 files changed, 10 insertions(+), 19 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 0d0bec3628ec..0963071e8f90 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -329,7 +329,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp); struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype); void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq); int ath_tx_setup(struct ath_softc *sc, int haltype); -void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx); +bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx); void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx); void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index dace215b693e..928ef68ab40c 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -244,11 +244,12 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, * the relevant bits of the h/w. */ ath9k_hw_set_interrupts(ah, 0); - ath_drain_all_txq(sc, false); + stopped = ath_drain_all_txq(sc, false); spin_lock_bh(&sc->rx.pcu_lock); - stopped = ath_stoprecv(sc); + if (!ath_stoprecv(sc)) + stopped = false; /* XXX: do not flush receive queue here. We don't want * to flush data frames already in queue because of diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index f2ade2402ce2..aff04789f794 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1120,7 +1120,7 @@ void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx) } } -void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) +bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) { struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(sc->sc_ah); @@ -1128,7 +1128,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) int i, npend = 0; if (sc->sc_flags & SC_OP_INVALID) - return; + return true; /* Stop beacon queue */ ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); @@ -1142,25 +1142,15 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) } } - if (npend) { - int r; - - ath_print(common, ATH_DBG_FATAL, - "Failed to stop TX DMA. Resetting hardware!\n"); - - spin_lock_bh(&sc->sc_resetlock); - r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false); - if (r) - ath_print(common, ATH_DBG_FATAL, - "Unable to reset hardware; reset status %d\n", - r); - spin_unlock_bh(&sc->sc_resetlock); - } + if (npend) + ath_print(common, ATH_DBG_FATAL, "Failed to stop TX DMA!\n"); for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { if (ATH_TXQ_SETUP(sc, i)) ath_draintxq(sc, &sc->tx.txq[i], retry_tx); } + + return !npend; } void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq) -- cgit v1.2.1 From 38852b20c8b6d97618204ac64abbf14f0080393e Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Mon, 6 Dec 2010 19:09:27 +0530 Subject: ath9k: Fix STA disconnect issue due to received MIC failed bcast frames AR_RxKeyIdxValid will not be set for bcast/mcast frames and so relying this status for MIC failed frames is buggy. Due to this, MIC failure events for broadcast frames are not sent to supplicant resulted in AP disconnecting the STA. Able to pass Wifi Test case 5.2.18 with this fix. Cc: Stable (2.6.36+) Signed-off-by: Senthil Balasubramanian Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/mac.c | 3 +-- drivers/net/wireless/ath/ath9k/recv.c | 9 ++++++++- 2 files changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 8c13479b17cd..c996963ab339 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -703,8 +703,7 @@ int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds, rs->rs_phyerr = phyerr; } else if (ads.ds_rxstatus8 & AR_DecryptCRCErr) rs->rs_status |= ATH9K_RXERR_DECRYPT; - else if ((ads.ds_rxstatus8 & AR_MichaelErr) && - rs->rs_keyix != ATH9K_RXKEYIX_INVALID) + else if (ads.ds_rxstatus8 & AR_MichaelErr) rs->rs_status |= ATH9K_RXERR_MIC; else if (ads.ds_rxstatus8 & AR_KeyMiss) rs->rs_status |= ATH9K_RXERR_DECRYPT; diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 1a62e351ec77..fdc2ec52b42f 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -838,6 +838,10 @@ static bool ath9k_rx_accept(struct ath_common *common, struct ath_rx_status *rx_stats, bool *decrypt_error) { +#define is_mc_or_valid_tkip_keyix ((is_mc || \ + (rx_stats->rs_keyix != ATH9K_RXKEYIX_INVALID && \ + test_bit(rx_stats->rs_keyix, common->tkip_keymap)))) + struct ath_hw *ah = common->ah; __le16 fc; u8 rx_status_len = ah->caps.rx_status_len; @@ -879,15 +883,18 @@ static bool ath9k_rx_accept(struct ath_common *common, if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) { *decrypt_error = true; } else if (rx_stats->rs_status & ATH9K_RXERR_MIC) { + bool is_mc; /* * The MIC error bit is only valid if the frame * is not a control frame or fragment, and it was * decrypted using a valid TKIP key. */ + is_mc = !!is_multicast_ether_addr(hdr->addr1); + if (!ieee80211_is_ctl(fc) && !ieee80211_has_morefrags(fc) && !(le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) && - test_bit(rx_stats->rs_keyix, common->tkip_keymap)) + is_mc_or_valid_tkip_keyix) rxs->flag |= RX_FLAG_MMIC_ERROR; else rx_stats->rs_status &= ~ATH9K_RXERR_MIC; -- cgit v1.2.1 From 884a963fa1c828a5c5fa7a46b2877dd463bfd47c Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Tue, 7 Dec 2010 17:42:18 +0530 Subject: ath9k: fix beacon resource related race condition The beacon tasklet is accesssing the bslot info for beacon generation. Meanwhile the same slot can be freed on interface deletion. Current the remove_interface disables the beacon alert after freeing the slot. This may leads to null pointer access. This patch disables SWBA and kills the beacon tasklet to prevent access to the slot to be freed. After releasing the slot, swba will be enabled again upon the availablity of beaconing interfaces. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 21 +++++++-------------- 1 file changed, 7 insertions(+), 14 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 928ef68ab40c..c0c3464d3a86 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1520,8 +1520,6 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, struct ath_softc *sc = aphy->sc; struct ath_common *common = ath9k_hw_common(sc->sc_ah); struct ath_vif *avp = (void *)vif->drv_priv; - bool bs_valid = false; - int i; ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n"); @@ -1535,26 +1533,21 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) || (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) || (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) { + /* Disable SWBA interrupt */ + sc->sc_ah->imask &= ~ATH9K_INT_SWBA; ath9k_ps_wakeup(sc); + ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask); ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); ath9k_ps_restore(sc); + tasklet_kill(&sc->bcon_tasklet); } ath_beacon_return(sc, avp); sc->sc_flags &= ~SC_OP_BEACONS; - for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) { - if (sc->beacon.bslot[i] == vif) { - printk(KERN_DEBUG "%s: vif had allocated beacon " - "slot\n", __func__); - sc->beacon.bslot[i] = NULL; - sc->beacon.bslot_aphy[i] = NULL; - } else if (sc->beacon.bslot[i]) - bs_valid = true; - } - if (!bs_valid && (sc->sc_ah->imask & ATH9K_INT_SWBA)) { - /* Disable SWBA interrupt */ - sc->sc_ah->imask &= ~ATH9K_INT_SWBA; + if (sc->nbcnvifs) { + /* Re-enable SWBA interrupt */ + sc->sc_ah->imask |= ATH9K_INT_SWBA; ath9k_ps_wakeup(sc); ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask); ath9k_ps_restore(sc); -- cgit v1.2.1 From 229bd792be0bad245b78ed8f119952733a4752e5 Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Tue, 7 Dec 2010 18:50:42 +0000 Subject: orinoco: initialise priv->hw before assigning the interrupt The interrupt handler takes a lock - but since commit bcad6e80f3f this lock goes through an indirection specified in the hermes_t structure. We must therefore initialise the structure before setting up the interrupt handler. Fix orinoco_cs and spectrum_cs Bisected by: Matt Domsch Signed-off by: David Kilroy Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/orinoco_cs.c | 14 +++++++------- drivers/net/wireless/orinoco/spectrum_cs.c | 14 +++++++------- 2 files changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 71b3d68b9403..32954c4b243a 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -151,20 +151,20 @@ orinoco_cs_config(struct pcmcia_device *link) goto failed; } - ret = pcmcia_request_irq(link, orinoco_interrupt); - if (ret) - goto failed; - - /* We initialize the hermes structure before completing PCMCIA - * configuration just in case the interrupt handler gets - * called. */ mem = ioport_map(link->resource[0]->start, resource_size(link->resource[0])); if (!mem) goto failed; + /* We initialize the hermes structure before completing PCMCIA + * configuration just in case the interrupt handler gets + * called. */ hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); + ret = pcmcia_request_irq(link, orinoco_interrupt); + if (ret) + goto failed; + ret = pcmcia_enable_device(link); if (ret) goto failed; diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index fb859a5ad2eb..db34c282e59b 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -214,21 +214,21 @@ spectrum_cs_config(struct pcmcia_device *link) goto failed; } - ret = pcmcia_request_irq(link, orinoco_interrupt); - if (ret) - goto failed; - - /* We initialize the hermes structure before completing PCMCIA - * configuration just in case the interrupt handler gets - * called. */ mem = ioport_map(link->resource[0]->start, resource_size(link->resource[0])); if (!mem) goto failed; + /* We initialize the hermes structure before completing PCMCIA + * configuration just in case the interrupt handler gets + * called. */ hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); hw->eeprom_pda = true; + ret = pcmcia_request_irq(link, orinoco_interrupt); + if (ret) + goto failed; + ret = pcmcia_enable_device(link); if (ret) goto failed; -- cgit v1.2.1 From d82b577b8cf89a17cab932db272769dfc69a98df Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Tue, 7 Dec 2010 13:35:55 -0800 Subject: ath5k: Fix beaconing in mesh mode This patch fixes the oops below when attempting to bring up a mesh interface on ath5k hardware. [ 128.933099] kernel BUG at drivers/net/wireless/ath/ath5k/base.c:197! [ 128.933099] invalid opcode: 0000 [#1] (...) [ 128.933099] Call Trace: [ 128.933099] [] ? ath5k_beacon_update+0x57/0x1f8 [ath5k] [ 128.933099] [] ? __sysfs_add_one+0x28/0x76 [ 128.933099] [] ? ath5k_bss_info_changed+0x13f/0x173 [ath5k] [ 128.933099] [] ? ieee80211_config_beacon+0xc0/0x17e [mac80211] [ 128.933099] [] ? ieee80211_bss_info_change_notify+0x182/0x18b [mac80211] [ 128.933099] [] ? ath5k_bss_info_changed+0x0/0x173 [ath5k] [ 128.933099] [] ? ieee80211_config_beacon+0x16d/0x17e [mac80211] [ 128.933099] [] ? ieee80211_add_beacon+0x34/0x39 [mac80211] [ 128.933099] [] ? ieee80211s_init+0xf8/0x10f [mac80211] [ 128.933099] [] ? ieee80211_mesh_init_sdata+0xdb/0x154 [mac80211] Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 8251946842e6..29b855c426bb 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1949,8 +1949,9 @@ ath5k_beacon_send(struct ath5k_softc *sc) /* NB: hw still stops DMA, so proceed */ } - /* refresh the beacon for AP mode */ - if (sc->opmode == NL80211_IFTYPE_AP) + /* refresh the beacon for AP or MESH mode */ + if (sc->opmode == NL80211_IFTYPE_AP || + sc->opmode == NL80211_IFTYPE_MESH_POINT) ath5k_beacon_update(sc->hw, vif); ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr); @@ -2851,7 +2852,8 @@ static int ath5k_add_interface(struct ieee80211_hw *hw, /* Assign the vap/adhoc to a beacon xmit slot. */ if ((avf->opmode == NL80211_IFTYPE_AP) || - (avf->opmode == NL80211_IFTYPE_ADHOC)) { + (avf->opmode == NL80211_IFTYPE_ADHOC) || + (avf->opmode == NL80211_IFTYPE_MESH_POINT)) { int slot; WARN_ON(list_empty(&sc->bcbuf)); -- cgit v1.2.1 From c26d5339424e68f8643cf3448986c4f77b941a65 Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Tue, 7 Dec 2010 13:36:55 -0800 Subject: ath5k: Prevent mesh interfaces from being counted as ad-hoc This results in an erroneus num_adhoc_vifs count, as the this counter was incremented but not decremented for mesh interfaces. Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 29b855c426bb..888502e2bf86 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2872,7 +2872,7 @@ static int ath5k_add_interface(struct ieee80211_hw *hw, sc->bslot[avf->bslot] = vif; if (avf->opmode == NL80211_IFTYPE_AP) sc->num_ap_vifs++; - else + else if (avf->opmode == NL80211_IFTYPE_ADHOC) sc->num_adhoc_vifs++; } -- cgit v1.2.1 From b93996cf67d47597efad03d5e5431c7b8b11e688 Mon Sep 17 00:00:00 2001 From: Javier Cardona Date: Tue, 7 Dec 2010 13:37:56 -0800 Subject: ath5k: Put the right tsf value in mesh beacons Signed-off-by: Javier Cardona Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 888502e2bf86..42ed923cdb1a 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1917,7 +1917,8 @@ ath5k_beacon_send(struct ath5k_softc *sc) sc->bmisscount = 0; } - if (sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) { + if ((sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) || + sc->opmode == NL80211_IFTYPE_MESH_POINT) { u64 tsf = ath5k_hw_get_tsf64(ah); u32 tsftu = TSF_TO_TU(tsf); int slot = ((tsftu % sc->bintval) * ATH_BCBUF) / sc->bintval; -- cgit v1.2.1 From f933ebed7888a9a7d73ebeeb6bcbb3f710c423b4 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 1 Dec 2010 12:30:27 +0530 Subject: ath9k_htc: Fix suspend/resume The HW has to be set to FULLSLEEP mode during suspend, when no interface has been brought up. Not doing this would break resume, as the chip won't be powered up at all. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 7 +++++++ drivers/net/wireless/ath/ath9k/htc.h | 3 +++ drivers/net/wireless/ath/ath9k/htc_drv_init.c | 6 ++++++ drivers/net/wireless/ath/ath9k/htc_drv_main.c | 4 ++-- 4 files changed, 18 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index dfb6560dab92..0de3c3d3c245 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -1024,6 +1024,13 @@ static int ath9k_hif_usb_suspend(struct usb_interface *interface, struct hif_device_usb *hif_dev = (struct hif_device_usb *) usb_get_intfdata(interface); + /* + * The device has to be set to FULLSLEEP mode in case no + * interface is up. + */ + if (!(hif_dev->flags & HIF_USB_START)) + ath9k_htc_suspend(hif_dev->htc_handle); + ath9k_hif_usb_dealloc_urbs(hif_dev); return 0; diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h index 75ecf6a30d25..c3b561daa6c1 100644 --- a/drivers/net/wireless/ath/ath9k/htc.h +++ b/drivers/net/wireless/ath/ath9k/htc.h @@ -455,6 +455,8 @@ u32 ath9k_htc_calcrxfilter(struct ath9k_htc_priv *priv); void ath9k_htc_ps_wakeup(struct ath9k_htc_priv *priv); void ath9k_htc_ps_restore(struct ath9k_htc_priv *priv); void ath9k_ps_work(struct work_struct *work); +bool ath9k_htc_setpower(struct ath9k_htc_priv *priv, + enum ath9k_power_mode mode); void ath9k_start_rfkill_poll(struct ath9k_htc_priv *priv); void ath9k_init_leds(struct ath9k_htc_priv *priv); @@ -464,6 +466,7 @@ int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev, u16 devid, char *product); void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug); #ifdef CONFIG_PM +void ath9k_htc_suspend(struct htc_target *htc_handle); int ath9k_htc_resume(struct htc_target *htc_handle); #endif #ifdef CONFIG_ATH9K_HTC_DEBUGFS diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index 7c8a38d04561..8776f49ffd41 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -891,6 +891,12 @@ void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug) } #ifdef CONFIG_PM + +void ath9k_htc_suspend(struct htc_target *htc_handle) +{ + ath9k_htc_setpower(htc_handle->drv_priv, ATH9K_PM_FULL_SLEEP); +} + int ath9k_htc_resume(struct htc_target *htc_handle) { int ret; diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index 9a3be8da755d..51977caca47f 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -63,8 +63,8 @@ static enum htc_phymode ath9k_htc_get_curmode(struct ath9k_htc_priv *priv, return mode; } -static bool ath9k_htc_setpower(struct ath9k_htc_priv *priv, - enum ath9k_power_mode mode) +bool ath9k_htc_setpower(struct ath9k_htc_priv *priv, + enum ath9k_power_mode mode) { bool ret; -- cgit v1.2.1 From ba34fcee476d11e7c9df95932787a22a96ff6e68 Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Sun, 5 Dec 2010 15:45:58 +0000 Subject: orinoco: clear countermeasure setting on commit ... and interface up. In these situations, you are usually trying to connect to a new AP, so keeping TKIP countermeasures active is confusing. This is already how the driver behaves (inadvertently). However, querying SIOCGIWAUTH may tell userspace that countermeasures are active when they aren't. Clear the setting so that the reporting matches what the driver has done.. Signed-off by: David Kilroy Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/main.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c index fa0cf744958f..f3d396e7544b 100644 --- a/drivers/net/wireless/orinoco/main.c +++ b/drivers/net/wireless/orinoco/main.c @@ -1811,6 +1811,12 @@ static int __orinoco_commit(struct orinoco_private *priv) struct net_device *dev = priv->ndev; int err = 0; + /* If we've called commit, we are reconfiguring or bringing the + * interface up. Maintaining countermeasures across this would + * be confusing, so note that we've disabled them. The port will + * be enabled later in orinoco_commit or __orinoco_up. */ + priv->tkip_cm_active = 0; + err = orinoco_hw_program_rids(priv); /* FIXME: what about netif_tx_lock */ -- cgit v1.2.1 From 0a54917c3fc295cb61f3fb52373c173fd3b69f48 Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Sun, 5 Dec 2010 15:43:55 +0000 Subject: orinoco: fix TKIP countermeasure behaviour Enable the port when disabling countermeasures, and disable it on enabling countermeasures. This bug causes the response of the system to certain attacks to be ineffective. It also prevents wpa_supplicant from getting scan results, as wpa_supplicant disables countermeasures on startup - preventing the hardware from scanning. wpa_supplicant works with ap_mode=2 despite this bug because the commit handler re-enables the port. The log tends to look like: State: DISCONNECTED -> SCANNING Starting AP scan for wildcard SSID Scan requested (ret=0) - scan timeout 5 seconds EAPOL: disable timer tick EAPOL: Supplicant port status: Unauthorized Scan timeout - try to get results Failed to get scan results Failed to get scan results - try scanning again Setting scan request: 1 sec 0 usec Starting AP scan for wildcard SSID Scan requested (ret=-1) - scan timeout 5 seconds Failed to initiate AP scan. Reported by: Giacomo Comes Signed-off by: David Kilroy Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/wext.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/orinoco/wext.c b/drivers/net/wireless/orinoco/wext.c index 93505f93bf97..e5afabee60d1 100644 --- a/drivers/net/wireless/orinoco/wext.c +++ b/drivers/net/wireless/orinoco/wext.c @@ -911,10 +911,10 @@ static int orinoco_ioctl_set_auth(struct net_device *dev, */ if (param->value) { priv->tkip_cm_active = 1; - ret = hermes_enable_port(hw, 0); + ret = hermes_disable_port(hw, 0); } else { priv->tkip_cm_active = 0; - ret = hermes_disable_port(hw, 0); + ret = hermes_enable_port(hw, 0); } break; -- cgit v1.2.1 From cbf68a668d0e41527572c762824a1b6a9225d33f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 30 Nov 2010 11:03:44 -0800 Subject: iwlagn: rename enhanced txpower fields Some fields we didn't previously use from the enhanced TX power structure will be needed in the next patch, so rename them to their correct names to be able to use them and change code reading them accordingly. Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy --- drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c | 3 ++- drivers/net/wireless/iwlwifi/iwl-eeprom.h | 10 ++++++---- 2 files changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c index a650baba0809..96510600b751 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c @@ -419,7 +419,8 @@ void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv) * always check for valid entry before process * the information */ - if (!enhanced_txpower->common || enhanced_txpower->reserved) + if (!(enhanced_txpower->flags || enhanced_txpower->channel) || + enhanced_txpower->delta_20_in_40) continue; for (element = 0; element < eeprom_section_count; element++) { diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h index d9b590625ae4..310e34568a41 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h @@ -127,21 +127,23 @@ struct iwl_eeprom_channel { * Enhanced regulatory tx power portion of eeprom image can be broken down * into individual structures; each one is 8 bytes in size and contain the * following information - * @common: (desc + channel) not used by driver, should _NOT_ be "zero" + * @flags: entry flags + * @channel: channel number * @chain_a_max_pwr: chain a max power in 1/2 dBm * @chain_b_max_pwr: chain b max power in 1/2 dBm * @chain_c_max_pwr: chain c max power in 1/2 dBm - * @reserved: not used, should be "zero" + * @delta_20_in_40: 20-in-40 deltas (hi/lo) * @mimo2_max_pwr: mimo2 max power in 1/2 dBm * @mimo3_max_pwr: mimo3 max power in 1/2 dBm * */ struct iwl_eeprom_enhanced_txpwr { - __le16 common; + u8 flags; + u8 channel; s8 chain_a_max; s8 chain_b_max; s8 chain_c_max; - s8 reserved; + u8 delta_20_in_40; s8 mimo2_max; s8 mimo3_max; } __packed; -- cgit v1.2.1 From 6942fec92d3d1b6918425730de31b4c6d0d5c196 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Thu, 9 Dec 2010 10:09:14 -0800 Subject: iwlagn: implement layout-agnostic EEPROM reading From: Johannes Berg The current EEPROM reading code has some layout assumptions that now turned out to be false with some newer versions of the EEPROM. Luckily, we can avoid all such assumptions by using data in the EEPROM itself, so implement using that. However, for risk mitigation purposes, keep the old reading code for current hardware for now. Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy --- drivers/net/wireless/iwlwifi/iwl-1000.c | 2 + drivers/net/wireless/iwlwifi/iwl-6000.c | 12 ++++ drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c | 85 ++++++++++++++++++++++++++- drivers/net/wireless/iwlwifi/iwl-agn-lib.c | 6 ++ drivers/net/wireless/iwlwifi/iwl-core.h | 1 + drivers/net/wireless/iwlwifi/iwl-eeprom.h | 15 +++++ 6 files changed, 120 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index db540910b110..0e027f787fbc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -315,6 +315,7 @@ struct iwl_cfg iwl100_bgn_cfg = { .mod_params = &iwlagn_mod_params, .base_params = &iwl1000_base_params, .ht_params = &iwl1000_ht_params, + .use_new_eeprom_reading = true, }; struct iwl_cfg iwl100_bg_cfg = { @@ -330,6 +331,7 @@ struct iwl_cfg iwl100_bg_cfg = { .ops = &iwl1000_ops, .mod_params = &iwlagn_mod_params, .base_params = &iwl1000_base_params, + .use_new_eeprom_reading = true, }; MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX)); diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 11e6532fc573..0ceeaac85eda 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -561,6 +561,7 @@ struct iwl_cfg iwl6000g2a_2agn_cfg = { .ht_params = &iwl6000_ht_params, .need_dc_calib = true, .need_temp_offset_calib = true, + .use_new_eeprom_reading = true, }; struct iwl_cfg iwl6000g2a_2abg_cfg = { @@ -578,6 +579,7 @@ struct iwl_cfg iwl6000g2a_2abg_cfg = { .base_params = &iwl6000_base_params, .need_dc_calib = true, .need_temp_offset_calib = true, + .use_new_eeprom_reading = true, }; struct iwl_cfg iwl6000g2a_2bg_cfg = { @@ -595,6 +597,7 @@ struct iwl_cfg iwl6000g2a_2bg_cfg = { .base_params = &iwl6000_base_params, .need_dc_calib = true, .need_temp_offset_calib = true, + .use_new_eeprom_reading = true, }; struct iwl_cfg iwl6000g2b_2agn_cfg = { @@ -616,6 +619,7 @@ struct iwl_cfg iwl6000g2b_2agn_cfg = { .need_temp_offset_calib = true, /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, + .use_new_eeprom_reading = true, }; struct iwl_cfg iwl6000g2b_2abg_cfg = { @@ -636,6 +640,7 @@ struct iwl_cfg iwl6000g2b_2abg_cfg = { .need_temp_offset_calib = true, /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, + .use_new_eeprom_reading = true, }; struct iwl_cfg iwl6000g2b_2bgn_cfg = { @@ -657,6 +662,7 @@ struct iwl_cfg iwl6000g2b_2bgn_cfg = { .need_temp_offset_calib = true, /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, + .use_new_eeprom_reading = true, }; struct iwl_cfg iwl6000g2b_2bg_cfg = { @@ -677,6 +683,7 @@ struct iwl_cfg iwl6000g2b_2bg_cfg = { .need_temp_offset_calib = true, /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, + .use_new_eeprom_reading = true, }; struct iwl_cfg iwl6000g2b_bgn_cfg = { @@ -698,6 +705,7 @@ struct iwl_cfg iwl6000g2b_bgn_cfg = { .need_temp_offset_calib = true, /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, + .use_new_eeprom_reading = true, }; struct iwl_cfg iwl6000g2b_bg_cfg = { @@ -718,6 +726,7 @@ struct iwl_cfg iwl6000g2b_bg_cfg = { .need_temp_offset_calib = true, /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, + .use_new_eeprom_reading = true, }; /* @@ -804,6 +813,7 @@ struct iwl_cfg iwl6050g2_bgn_cfg = { .base_params = &iwl6050_base_params, .ht_params = &iwl6000_ht_params, .need_dc_calib = true, + .use_new_eeprom_reading = true, }; struct iwl_cfg iwl6050_2abg_cfg = { @@ -857,6 +867,7 @@ struct iwl_cfg iwl130_bgn_cfg = { .need_dc_calib = true, /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, + .use_new_eeprom_reading = true, }; struct iwl_cfg iwl130_bg_cfg = { @@ -876,6 +887,7 @@ struct iwl_cfg iwl130_bg_cfg = { .need_dc_calib = true, /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, + .use_new_eeprom_reading = true, }; MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX)); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c index 96510600b751..9eeeda18748d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c @@ -392,7 +392,7 @@ static s8 iwl_update_channel_txpower(struct iwl_priv *priv, /** * iwlcore_eeprom_enhanced_txpower: process enhanced tx power info */ -void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv) +static void iwlcore_eeprom_enhanced_txpower_old(struct iwl_priv *priv) { int eeprom_section_count = 0; int section, element; @@ -453,3 +453,86 @@ void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv) } } } + +static void +iwlcore_eeprom_enh_txp_read_element(struct iwl_priv *priv, + struct iwl_eeprom_enhanced_txpwr *txp, + s8 max_txpower_avg) +{ + int ch_idx; + bool is_ht40 = txp->flags & IWL_EEPROM_ENH_TXP_FL_40MHZ; + enum ieee80211_band band; + + band = txp->flags & IWL_EEPROM_ENH_TXP_FL_BAND_52G ? + IEEE80211_BAND_5GHZ : IEEE80211_BAND_2GHZ; + + for (ch_idx = 0; ch_idx < priv->channel_count; ch_idx++) { + struct iwl_channel_info *ch_info = &priv->channel_info[ch_idx]; + + /* update matching channel or from common data only */ + if (txp->channel != 0 && ch_info->channel != txp->channel) + continue; + + /* update matching band only */ + if (band != ch_info->band) + continue; + + if (ch_info->max_power_avg < max_txpower_avg && !is_ht40) { + ch_info->max_power_avg = max_txpower_avg; + ch_info->curr_txpow = max_txpower_avg; + ch_info->scan_power = max_txpower_avg; + } + + if (is_ht40 && ch_info->ht40_max_power_avg < max_txpower_avg) + ch_info->ht40_max_power_avg = max_txpower_avg; + } +} + +#define EEPROM_TXP_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT) +#define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr) +#define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE) + +static void iwlcore_eeprom_enhanced_txpower_new(struct iwl_priv *priv) +{ + struct iwl_eeprom_enhanced_txpwr *txp_array, *txp; + int idx, entries; + __le16 *txp_len; + s8 max_txp_avg, max_txp_avg_halfdbm; + + BUILD_BUG_ON(sizeof(struct iwl_eeprom_enhanced_txpwr) != 8); + + /* the length is in 16-bit words, but we want entries */ + txp_len = (__le16 *) iwlagn_eeprom_query_addr(priv, EEPROM_TXP_SZ_OFFS); + entries = le16_to_cpup(txp_len) * 2 / EEPROM_TXP_ENTRY_LEN; + + txp_array = (void *) iwlagn_eeprom_query_addr(priv, EEPROM_TXP_OFFS); + for (idx = 0; idx < entries; idx++) { + txp = &txp_array[idx]; + + /* skip invalid entries */ + if (!(txp->flags & IWL_EEPROM_ENH_TXP_FL_VALID)) + continue; + + max_txp_avg = iwl_get_max_txpower_avg(priv, txp_array, idx, + &max_txp_avg_halfdbm); + + /* + * Update the user limit values values to the highest + * power supported by any channel + */ + if (max_txp_avg > priv->tx_power_user_lmt) + priv->tx_power_user_lmt = max_txp_avg; + if (max_txp_avg_halfdbm > priv->tx_power_lmt_in_half_dbm) + priv->tx_power_lmt_in_half_dbm = max_txp_avg_halfdbm; + + iwlcore_eeprom_enh_txp_read_element(priv, txp, max_txp_avg); + } +} + +void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv) +{ + if (priv->cfg->use_new_eeprom_reading) + iwlcore_eeprom_enhanced_txpower_new(priv); + else + iwlcore_eeprom_enhanced_txpower_old(priv); +} diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c index b555edd53354..554afb7d9670 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c @@ -569,6 +569,12 @@ static u32 eeprom_indirect_address(const struct iwl_priv *priv, u32 address) case INDIRECT_REGULATORY: offset = iwl_eeprom_query16(priv, EEPROM_LINK_REGULATORY); break; + case INDIRECT_TXP_LIMIT: + offset = iwl_eeprom_query16(priv, EEPROM_LINK_TXP_LIMIT); + break; + case INDIRECT_TXP_LIMIT_SIZE: + offset = iwl_eeprom_query16(priv, EEPROM_LINK_TXP_LIMIT_SIZE); + break; case INDIRECT_CALIBRATION: offset = iwl_eeprom_query16(priv, EEPROM_LINK_CALIBRATION); break; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 64527def059f..954ecc2c34c4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -390,6 +390,7 @@ struct iwl_cfg { const bool need_temp_offset_calib; /* if used set to true */ u8 scan_rx_antennas[IEEE80211_NUM_BANDS]; u8 scan_tx_antennas[IEEE80211_NUM_BANDS]; + const bool use_new_eeprom_reading; /* temporary, remove later */ }; /*************************** diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h index 310e34568a41..e3a279d2d0b6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h @@ -120,6 +120,17 @@ struct iwl_eeprom_channel { s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */ } __packed; +enum iwl_eeprom_enhanced_txpwr_flags { + IWL_EEPROM_ENH_TXP_FL_VALID = BIT(0), + IWL_EEPROM_ENH_TXP_FL_BAND_52G = BIT(1), + IWL_EEPROM_ENH_TXP_FL_OFDM = BIT(2), + IWL_EEPROM_ENH_TXP_FL_40MHZ = BIT(3), + IWL_EEPROM_ENH_TXP_FL_HT_AP = BIT(4), + IWL_EEPROM_ENH_TXP_FL_RES1 = BIT(5), + IWL_EEPROM_ENH_TXP_FL_RES2 = BIT(6), + IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE = BIT(7), +}; + /** * iwl_eeprom_enhanced_txpwr structure * This structure presents the enhanced regulatory tx power limit layout @@ -188,6 +199,8 @@ struct iwl_eeprom_enhanced_txpwr { #define EEPROM_LINK_CALIBRATION (2*0x67) #define EEPROM_LINK_PROCESS_ADJST (2*0x68) #define EEPROM_LINK_OTHERS (2*0x69) +#define EEPROM_LINK_TXP_LIMIT (2*0x6a) +#define EEPROM_LINK_TXP_LIMIT_SIZE (2*0x6b) /* agn regulatory - indirect access */ #define EEPROM_REG_BAND_1_CHANNELS ((0x08)\ @@ -391,6 +404,8 @@ struct iwl_eeprom_calib_info { #define INDIRECT_CALIBRATION 0x00040000 #define INDIRECT_PROCESS_ADJST 0x00050000 #define INDIRECT_OTHERS 0x00060000 +#define INDIRECT_TXP_LIMIT 0x00070000 +#define INDIRECT_TXP_LIMIT_SIZE 0x00080000 #define INDIRECT_ADDRESS 0x00100000 /* General */ -- cgit v1.2.1 From 4a55d5852adbe66722fb1636c82c7864cd5be441 Mon Sep 17 00:00:00 2001 From: Sven Neumann Date: Thu, 9 Dec 2010 09:38:36 +0100 Subject: libertas: fix potential NULL-pointer dereference The code wants to check if there's a channel and it is not disabled, but it used to check if channel is not NULL and accessed the channel struct if this check failed. Signed-off-by: Sven Neumann Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cfg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 373930afc26b..113f4f204657 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -619,7 +619,7 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy, print_ssid(ssid_buf, ssid, ssid_len), LBS_SCAN_RSSI_TO_MBM(rssi)/100); - if (channel || + if (channel && !(channel->flags & IEEE80211_CHAN_DISABLED)) cfg80211_inform_bss(wiphy, channel, bssid, le64_to_cpu(*(__le64 *)tsfdesc), -- cgit v1.2.1 From 16cad7fba037b34ca32cc0adac65bc089d969fb8 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 11 Dec 2010 12:19:48 +0100 Subject: p54usb: add 5 more USBIDs This patch adds five more USBIDs to the table. Source: http://www.linuxant.com/pipermail/driverloader/2005q3/002307.html http://wireless.kernel.org/en/users/Drivers/p54/devices (by M. Davis) Cc: Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54usb.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index d5bc21e5a02c..610aafe207a3 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -43,6 +43,7 @@ MODULE_FIRMWARE("isl3887usb"); static struct usb_device_id p54u_table[] __devinitdata = { /* Version 1 devices (pci chip + net2280) */ + {USB_DEVICE(0x0411, 0x0050)}, /* Buffalo WLI2-USB2-G54 */ {USB_DEVICE(0x045e, 0x00c2)}, /* Microsoft MN-710 */ {USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */ {USB_DEVICE(0x06b9, 0x0120)}, /* Thomson SpeedTouch 120g */ @@ -56,9 +57,12 @@ static struct usb_device_id p54u_table[] __devinitdata = { {USB_DEVICE(0x0846, 0x4220)}, /* Netgear WG111 */ {USB_DEVICE(0x09aa, 0x1000)}, /* Spinnaker Proto board */ {USB_DEVICE(0x0cde, 0x0006)}, /* Medion 40900, Roper Europe */ + {USB_DEVICE(0x0db0, 0x6826)}, /* MSI UB54G (MS-6826) */ {USB_DEVICE(0x107b, 0x55f2)}, /* Gateway WGU-210 (Gemtek) */ {USB_DEVICE(0x124a, 0x4023)}, /* Shuttle PN15, Airvast WM168g, IOGear GWU513 */ + {USB_DEVICE(0x1435, 0x0210)}, /* Inventel UR054G */ {USB_DEVICE(0x1630, 0x0005)}, /* 2Wire 802.11g USB (v1) / Z-Com */ + {USB_DEVICE(0x182d, 0x096b)}, /* Sitecom WL-107 */ {USB_DEVICE(0x1915, 0x2234)}, /* Linksys WUSB54G OEM */ {USB_DEVICE(0x1915, 0x2235)}, /* Linksys WUSB54G Portable OEM */ {USB_DEVICE(0x2001, 0x3701)}, /* DLink DWL-G120 Spinnaker */ @@ -94,6 +98,7 @@ static struct usb_device_id p54u_table[] __devinitdata = { {USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */ {USB_DEVICE(0x1668, 0x1050)}, /* Actiontec 802UIG-1 */ {USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */ + {USB_DEVICE(0x2001, 0x3705)}, /* D-Link DWL-G120 rev C1 */ {USB_DEVICE(0x413c, 0x5513)}, /* Dell WLA3310 USB Wireless Adapter */ {USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */ {USB_DEVICE(0x413c, 0x8104)}, /* Cohiba Proto board */ -- cgit v1.2.1 From 56e6417b49132d4f56e9f2241d31942b90b46315 Mon Sep 17 00:00:00 2001 From: Eduardo Costa Date: Tue, 14 Dec 2010 14:37:59 -0600 Subject: p54usb: New USB ID for Gemtek WUBI-100GW This USB ID is for the WUBI-100GW 802.11g Wireless LAN USB Device that uses p54usb. Signed-off-by: Larry Finger Signed-off-by: Eduardo Costa Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54usb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 610aafe207a3..2325e56a9b0b 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -61,6 +61,7 @@ static struct usb_device_id p54u_table[] __devinitdata = { {USB_DEVICE(0x107b, 0x55f2)}, /* Gateway WGU-210 (Gemtek) */ {USB_DEVICE(0x124a, 0x4023)}, /* Shuttle PN15, Airvast WM168g, IOGear GWU513 */ {USB_DEVICE(0x1435, 0x0210)}, /* Inventel UR054G */ + {USB_DEVICE(0x15a9, 0x0002)}, /* Gemtek WUBI-100GW 802.11g */ {USB_DEVICE(0x1630, 0x0005)}, /* 2Wire 802.11g USB (v1) / Z-Com */ {USB_DEVICE(0x182d, 0x096b)}, /* Sitecom WL-107 */ {USB_DEVICE(0x1915, 0x2234)}, /* Linksys WUSB54G OEM */ -- cgit v1.2.1 From 9f333281a7da4c3a59bccc0cb53f7590eb850d93 Mon Sep 17 00:00:00 2001 From: Johannes Stezenbach Date: Tue, 30 Nov 2010 16:49:23 +0100 Subject: mac80211/rt2x00: add ieee80211_tx_status_ni() All rt2x00 drivers except rt2800pci call ieee80211_tx_status() from a workqueue, which causes "NOHZ: local_softirq_pending 08" messages. To fix it, add ieee80211_tx_status_ni() similar to ieee80211_rx_ni() which can be called from process context, and call it from rt2x00lib_txdone(). For the rt2800pci special case a driver flag is introduced. https://bugzilla.kernel.org/show_bug.cgi?id=24892 Signed-off-by: Johannes Stezenbach Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800pci.c | 1 + drivers/net/wireless/rt2x00/rt2x00.h | 1 + drivers/net/wireless/rt2x00/rt2x00dev.c | 9 ++++++--- 3 files changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index b26739535986..09a67905c230 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -912,6 +912,7 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_TXSTATUS_FIFO, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_TASKLET_CONTEXT, &rt2x00dev->flags); if (!modparam_nohwcrypt) __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags); diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 94fe589acfaa..ab43e7ca2a23 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -664,6 +664,7 @@ enum rt2x00_flags { DRIVER_REQUIRE_COPY_IV, DRIVER_REQUIRE_L2PAD, DRIVER_REQUIRE_TXSTATUS_FIFO, + DRIVER_REQUIRE_TASKLET_CONTEXT, /* * Driver features diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 5ba79b935f09..d019830ca840 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -390,9 +390,12 @@ void rt2x00lib_txdone(struct queue_entry *entry, * through a mac80211 library call (RTS/CTS) then we should not * send the status report back. */ - if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) - ieee80211_tx_status(rt2x00dev->hw, entry->skb); - else + if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) { + if (test_bit(DRIVER_REQUIRE_TASKLET_CONTEXT, &rt2x00dev->flags)) + ieee80211_tx_status(rt2x00dev->hw, entry->skb); + else + ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb); + } else dev_kfree_skb_any(entry->skb); /* -- cgit v1.2.1 From b2b7ab22fa2e619c20917e825c0da7212ca2efc9 Mon Sep 17 00:00:00 2001 From: Meelis Roos Date: Fri, 17 Dec 2010 23:27:50 +0200 Subject: hostap: remove netif_stop_queue from init Fix runtime warning with backtrace from hostap by removing netif_stop_queue() call before register_netdev. Tested to work fine on hostap_pci Prism 2.5. (This removes a warning about calling netif_stop_queue before register_netdev is called. -- JWL) Signed-off-by: Meelis Roos Acked-by: David S. Miller Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/hostap_main.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c index 25a2722c8a98..1d9aed645723 100644 --- a/drivers/net/wireless/hostap/hostap_main.c +++ b/drivers/net/wireless/hostap/hostap_main.c @@ -891,7 +891,6 @@ void hostap_setup_dev(struct net_device *dev, local_info_t *local, SET_ETHTOOL_OPS(dev, &prism2_ethtool_ops); - netif_stop_queue(dev); } static int hostap_enable_hostapd(local_info_t *local, int rtnl_locked) -- cgit v1.2.1