From 573cfde7aaeaadb0fd356ff2a14bdf9238967661 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Fri, 4 Feb 2011 01:41:02 +0200 Subject: ath5k: Fix fast channel switching Fast channel change fixes: a) Always set OFDM timings b) Don't re-activate PHY c) Enable only NF calibration, not AGC https://bugzilla.kernel.org/show_bug.cgi?id=27382 Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/phy.c | 142 +++++++++++++++++++++-------------- 1 file changed, 87 insertions(+), 55 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index c44111fc98b7..62ce2f4e8605 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -282,6 +282,34 @@ int ath5k_hw_phy_disable(struct ath5k_hw *ah) return 0; } +/* + * Wait for synth to settle + */ +static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + /* + * On 5211+ read activation -> rx delay + * and use it (100ns steps). + */ + if (ah->ah_version != AR5K_AR5210) { + u32 delay; + delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & + AR5K_PHY_RX_DELAY_M; + delay = (channel->hw_value & CHANNEL_CCK) ? + ((delay << 2) / 22) : (delay / 10); + if (ah->ah_bwmode == AR5K_BWMODE_10MHZ) + delay = delay << 1; + if (ah->ah_bwmode == AR5K_BWMODE_5MHZ) + delay = delay << 2; + /* XXX: /2 on turbo ? Let's be safe + * for now */ + udelay(100 + delay); + } else { + mdelay(1); + } +} + /**********************\ * RF Gain optimization * @@ -3238,6 +3266,13 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, /* Failed */ if (i >= 100) return -EIO; + + /* Set channel and wait for synth */ + ret = ath5k_hw_channel(ah, channel); + if (ret) + return ret; + + ath5k_hw_wait_for_synth(ah, channel); } /* @@ -3252,13 +3287,53 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, if (ret) return ret; + /* Write OFDM timings on 5212*/ + if (ah->ah_version == AR5K_AR5212 && + channel->hw_value & CHANNEL_OFDM) { + + ret = ath5k_hw_write_ofdm_timings(ah, channel); + if (ret) + return ret; + + /* Spur info is available only from EEPROM versions + * greater than 5.3, but the EEPROM routines will use + * static values for older versions */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5424) + ath5k_hw_set_spur_mitigation_filter(ah, + channel); + } + + /* If we used fast channel switching + * we are done, release RF bus and + * fire up NF calibration. + * + * Note: Only NF calibration due to + * channel change, not AGC calibration + * since AGC is still running ! + */ + if (fast) { + /* + * Release RF Bus grant + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ, + AR5K_PHY_RFBUS_REQ_REQUEST); + + /* + * Start NF calibration + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_NF); + + return ret; + } + /* * For 5210 we do all initialization using * initvals, so we don't have to modify * any settings (5210 also only supports * a/aturbo modes) */ - if ((ah->ah_version != AR5K_AR5210) && !fast) { + if (ah->ah_version != AR5K_AR5210) { /* * Write initial RF gain settings @@ -3277,22 +3352,6 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, if (ret) return ret; - /* Write OFDM timings on 5212*/ - if (ah->ah_version == AR5K_AR5212 && - channel->hw_value & CHANNEL_OFDM) { - - ret = ath5k_hw_write_ofdm_timings(ah, channel); - if (ret) - return ret; - - /* Spur info is available only from EEPROM versions - * greater than 5.3, but the EEPROM routines will use - * static values for older versions */ - if (ah->ah_mac_srev >= AR5K_SREV_AR5424) - ath5k_hw_set_spur_mitigation_filter(ah, - channel); - } - /*Enable/disable 802.11b mode on 5111 (enable 2111 frequency converter + CCK)*/ if (ah->ah_radio == AR5K_RF5111) { @@ -3323,47 +3382,20 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, */ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); + ath5k_hw_wait_for_synth(ah, channel); + /* - * On 5211+ read activation -> rx delay - * and use it. + * Perform ADC test to see if baseband is ready + * Set tx hold and check adc test register */ - if (ah->ah_version != AR5K_AR5210) { - u32 delay; - delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & - AR5K_PHY_RX_DELAY_M; - delay = (channel->hw_value & CHANNEL_CCK) ? - ((delay << 2) / 22) : (delay / 10); - if (ah->ah_bwmode == AR5K_BWMODE_10MHZ) - delay = delay << 1; - if (ah->ah_bwmode == AR5K_BWMODE_5MHZ) - delay = delay << 2; - /* XXX: /2 on turbo ? Let's be safe - * for now */ - udelay(100 + delay); - } else { - mdelay(1); - } - - if (fast) - /* - * Release RF Bus grant - */ - AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ, - AR5K_PHY_RFBUS_REQ_REQUEST); - else { - /* - * Perform ADC test to see if baseband is ready - * Set tx hold and check adc test register - */ - phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); - ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); - for (i = 0; i <= 20; i++) { - if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) - break; - udelay(200); - } - ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); + phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); + ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); + for (i = 0; i <= 20; i++) { + if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) + break; + udelay(200); } + ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); /* * Start automatic gain control calibration -- cgit v1.2.1 From 41504cce240f791f1e16561db95728c5537fbad9 Mon Sep 17 00:00:00 2001 From: "Fry, Donald H" Date: Wed, 16 Feb 2011 11:49:34 -0800 Subject: iwlagn: Support new 5000 microcode. New iwlwifi-5000 microcode requires driver support for API version 5. Signed-off-by: Don Fry Signed-off-by: Wey-Yi Guy --- drivers/net/wireless/iwlwifi/iwl-5000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 79ab0a6b1386..537fb8c84e3a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -51,7 +51,7 @@ #include "iwl-agn-debugfs.h" /* Highest firmware API version supported */ -#define IWL5000_UCODE_API_MAX 2 +#define IWL5000_UCODE_API_MAX 5 #define IWL5150_UCODE_API_MAX 2 /* Lowest firmware API version supported */ -- cgit v1.2.1 From a866a2cc1c558089dd4c627eeb300142b1354474 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Sun, 30 Jan 2011 13:22:41 +0100 Subject: rt2x00: Fix WPA TKIP Michael MIC failures. As reported and found by Johannes Stezenbach: rt2800{pci,usb} do not report the Michael MIC in RXed frames, but do check the Michael MIC in hardware. Therefore we have to report to mac80211 that the received frame does not include the Michael MIC. https://bugzilla.kernel.org/show_bug.cgi?id=16608 Signed-off-by: Gertjan van Wingerde Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800pci.c | 6 ++++++ drivers/net/wireless/rt2x00/rt2800usb.c | 6 ++++++ 2 files changed, 12 insertions(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 7951cdaa9c01..3b3f1e45ab3e 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -652,6 +652,12 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry, */ rxdesc->flags |= RX_FLAG_IV_STRIPPED; + /* + * The hardware has already checked the Michael Mic and has + * stripped it from the frame. Signal this to mac80211. + */ + rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) rxdesc->flags |= RX_FLAG_DECRYPTED; else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index b97a4a54ff4c..197a36c05fda 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -486,6 +486,12 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, */ rxdesc->flags |= RX_FLAG_IV_STRIPPED; + /* + * The hardware has already checked the Michael Mic and has + * stripped it from the frame. Signal this to mac80211. + */ + rxdesc->flags |= RX_FLAG_MMIC_STRIPPED; + if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS) rxdesc->flags |= RX_FLAG_DECRYPTED; else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC) -- cgit v1.2.1 From 0bf719dfdecc5552155cbec78e49fa06e531e35c Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 11 Feb 2011 01:48:42 +0100 Subject: p54pci: update receive dma buffers before and after processing Documentation/DMA-API-HOWTO.txt states: "DMA transfers need to be synced properly in order for the cpu and device to see the most uptodate and correct copy of the DMA buffer." Cc: Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54pci.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 1eacba4daa5b..0494d7b102d4 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -199,6 +199,7 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index, while (i != idx) { u16 len; struct sk_buff *skb; + dma_addr_t dma_addr; desc = &ring[i]; len = le16_to_cpu(desc->len); skb = rx_buf[i]; @@ -216,17 +217,20 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index, len = priv->common.rx_mtu; } + dma_addr = le32_to_cpu(desc->host_addr); + pci_dma_sync_single_for_cpu(priv->pdev, dma_addr, + priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE); skb_put(skb, len); if (p54_rx(dev, skb)) { - pci_unmap_single(priv->pdev, - le32_to_cpu(desc->host_addr), - priv->common.rx_mtu + 32, - PCI_DMA_FROMDEVICE); + pci_unmap_single(priv->pdev, dma_addr, + priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE); rx_buf[i] = NULL; - desc->host_addr = 0; + desc->host_addr = cpu_to_le32(0); } else { skb_trim(skb, 0); + pci_dma_sync_single_for_device(priv->pdev, dma_addr, + priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE); desc->len = cpu_to_le16(priv->common.rx_mtu + 32); } -- cgit v1.2.1 From 385918cc6af74e2b7ae10ec3ccaeea9a83e8e43e Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 21 Feb 2011 15:02:41 +0100 Subject: ath9k: correct ath9k_hw_set_interrupts Commit 4df3071ebd92ef7115b409da64d0eb405d24a631 "ath9k_hw: optimize interrupt mask changes", changed ath9k_hw_set_interrupts function to enable interrupts regardless of function argument, what could possibly be wrong. Correct that behaviour and check "ints" arguments before enabling interrupts, also disable interrupts if ints do not have ATH9K_INT_GLOBAL flag set. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/mac.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 180170d3ce25..2915b11edefb 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -885,7 +885,7 @@ void ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints) struct ath_common *common = ath9k_hw_common(ah); if (!(ints & ATH9K_INT_GLOBAL)) - ath9k_hw_enable_interrupts(ah); + ath9k_hw_disable_interrupts(ah); ath_dbg(common, ATH_DBG_INTERRUPT, "0x%x => 0x%x\n", omask, ints); @@ -963,7 +963,8 @@ void ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints) REG_CLR_BIT(ah, AR_IMR_S5, AR_IMR_S5_TIM_TIMER); } - ath9k_hw_enable_interrupts(ah); + if (ints & ATH9K_INT_GLOBAL) + ath9k_hw_enable_interrupts(ah); return; } -- cgit v1.2.1 From c86664e5a285af1afa06416e450e7c4af04daa7c Mon Sep 17 00:00:00 2001 From: Jan Puk Date: Tue, 22 Feb 2011 14:49:43 +0100 Subject: carl9170: add Airlive X.USB a/b/g/n USBID "AirLive X.USB now works perfectly under a Linux environment!" Cc: Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/usb.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c index 537732e5964f..f82c400be288 100644 --- a/drivers/net/wireless/ath/carl9170/usb.c +++ b/drivers/net/wireless/ath/carl9170/usb.c @@ -118,6 +118,8 @@ static struct usb_device_id carl9170_usb_ids[] = { { USB_DEVICE(0x057c, 0x8402) }, /* Qwest/Actiontec 802AIN Wireless N USB Network Adapter */ { USB_DEVICE(0x1668, 0x1200) }, + /* Airlive X.USB a/b/g/n */ + { USB_DEVICE(0x1b75, 0x9170) }, /* terminate */ {} -- cgit v1.2.1 From 63453c05da685323d45b7063cc27cf5e44b4134c Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Thu, 24 Feb 2011 12:25:42 +0200 Subject: rndis_wlan: use power save only for BCM4320b BCM4320a breaks when enabling power save (bug 29732). So disable power save for anything but BCM4320b that is known to work. Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville --- drivers/net/wireless/rndis_wlan.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 848cc2cce247..518542b4bf9e 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -2597,6 +2597,9 @@ static int rndis_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, __le32 mode; int ret; + if (priv->device_type != RNDIS_BCM4320B) + return -ENOTSUPP; + netdev_dbg(usbdev->net, "%s(): %s, %d\n", __func__, enabled ? "enabled" : "disabled", timeout); -- cgit v1.2.1 From 2c27392dc4d4f5ee8a3967a520b8f6cac0418031 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Sun, 27 Feb 2011 09:23:52 +0530 Subject: ath9k_htc: Fix an endian issue The stream length/tag fields have to be in little endian format. Fixing this makes the driver work on big-endian platforms. Cc: stable@kernel.org Tested-by: raghunathan.kailasanathan@wipro.com Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 5ab3084eb9cb..07b1633b7f3f 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -219,8 +219,9 @@ static int __hif_usb_tx(struct hif_device_usb *hif_dev) struct tx_buf *tx_buf = NULL; struct sk_buff *nskb = NULL; int ret = 0, i; - u16 *hdr, tx_skb_cnt = 0; + u16 tx_skb_cnt = 0; u8 *buf; + __le16 *hdr; if (hif_dev->tx.tx_skb_cnt == 0) return 0; @@ -245,9 +246,9 @@ static int __hif_usb_tx(struct hif_device_usb *hif_dev) buf = tx_buf->buf; buf += tx_buf->offset; - hdr = (u16 *)buf; - *hdr++ = nskb->len; - *hdr++ = ATH_USB_TX_STREAM_MODE_TAG; + hdr = (__le16 *)buf; + *hdr++ = cpu_to_le16(nskb->len); + *hdr++ = cpu_to_le16(ATH_USB_TX_STREAM_MODE_TAG); buf += 4; memcpy(buf, nskb->data, nskb->len); tx_buf->len = nskb->len + 4; -- cgit v1.2.1 From 2b799a6b25bb9f9fbc478782cd9503e8066ab618 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 26 Feb 2011 12:58:06 +0100 Subject: p54usb: add Senao NUB-350 usbid Reported-by: Mark Davis Cc: Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54usb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 21713a7638c4..9b344a921e74 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -98,6 +98,7 @@ static struct usb_device_id p54u_table[] __devinitdata = { {USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */ {USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */ {USB_DEVICE(0x1668, 0x1050)}, /* Actiontec 802UIG-1 */ + {USB_DEVICE(0x1740, 0x1000)}, /* Senao NUB-350 */ {USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */ {USB_DEVICE(0x2001, 0x3705)}, /* D-Link DWL-G120 rev C1 */ {USB_DEVICE(0x413c, 0x5513)}, /* Dell WLA3310 USB Wireless Adapter */ -- cgit v1.2.1