From aeb4a2eec2b1d2ac6507e9cec2aecc46fdba8741 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Mon, 23 Aug 2010 07:57:05 -0700 Subject: iwlagn: wifi/bt coex configuration sequence bt config command need to send before the init calibration command, driver need to let uCode know that calibrations are being performed now in order to assure antenna is not being taken to BT use during radio/dsp reads/writes Also, bt_coex_priorty_table command need to be send right after the bt_config_command during init sequence. Followed by bt coex envelope command to initialize and prepare uCode bt state machine Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-6000.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless/iwlwifi/iwl-6000.c') diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index a4601b58a5db..101630b80c40 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -235,11 +235,10 @@ static void iwl6000g2b_send_bt_config(struct iwl_priv *priv) /* * Configure BT coex mode to "no coexistence" when the * user disabled BT coexistence, we have no interface - * (might be in monitor mode), or the interface is in + * user disabled BT coexistence, or the interface is in * IBSS mode (no proper uCode support for coex then). */ - if (!bt_coex_active || !priv->vif || - priv->iw_mode == NL80211_IFTYPE_ADHOC) { + if (!bt_coex_active || priv->iw_mode == NL80211_IFTYPE_ADHOC) { bt_cmd.flags = 0; } else { bt_cmd.flags = IWL6000G2B_BT_FLAG_CHANNEL_INHIBITION | -- cgit v1.2.1