From 203c4805e91786f9a010bc7945a0fde70c9da28e Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 30 Mar 2009 22:30:33 -0400 Subject: atheros: put atheros wireless drivers into ath/ Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/ath5k.h | 1354 ------------------------------------ 1 file changed, 1354 deletions(-) delete mode 100644 drivers/net/wireless/ath5k/ath5k.h (limited to 'drivers/net/wireless/ath5k/ath5k.h') diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h deleted file mode 100644 index 48c18d11c507..000000000000 --- a/drivers/net/wireless/ath5k/ath5k.h +++ /dev/null @@ -1,1354 +0,0 @@ -/* - * Copyright (c) 2004-2007 Reyk Floeter - * Copyright (c) 2006-2007 Nick Kossifidis - * - * Permission to use, copy, modify, and distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _ATH5K_H -#define _ATH5K_H - -/* TODO: Clean up channel debuging -doesn't work anyway- and start - * working on reg. control code using all available eeprom information - * -rev. engineering needed- */ -#define CHAN_DEBUG 0 - -#include -#include -#include - -#include "../ath/regd.h" - -/* RX/TX descriptor hw structs - * TODO: Driver part should only see sw structs */ -#include "desc.h" - -/* EEPROM structs/offsets - * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities) - * and clean up common bits, then introduce set/get functions in eeprom.c */ -#include "eeprom.h" - -/* PCI IDs */ -#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ -#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ -#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ -#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ -#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ -#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ -#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ -#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ -#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ -#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ -#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ -#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ -#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ -#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ - -/****************************\ - GENERIC DRIVER DEFINITIONS -\****************************/ - -#define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__) - -#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \ - printk(_level "ath5k %s: " _fmt, \ - ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \ - ##__VA_ARGS__) - -#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \ - if (net_ratelimit()) \ - ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \ - } while (0) - -#define ATH5K_INFO(_sc, _fmt, ...) \ - ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__) - -#define ATH5K_WARN(_sc, _fmt, ...) \ - ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__) - -#define ATH5K_ERR(_sc, _fmt, ...) \ - ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__) - -/* - * AR5K REGISTER ACCESS - */ - -/* Some macros to read/write fields */ - -/* First shift, then mask */ -#define AR5K_REG_SM(_val, _flags) \ - (((_val) << _flags##_S) & (_flags)) - -/* First mask, then shift */ -#define AR5K_REG_MS(_val, _flags) \ - (((_val) & (_flags)) >> _flags##_S) - -/* Some registers can hold multiple values of interest. For this - * reason when we want to write to these registers we must first - * retrieve the values which we do not want to clear (lets call this - * old_data) and then set the register with this and our new_value: - * ( old_data | new_value) */ -#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ - (((_val) << _flags##_S) & (_flags)), _reg) - -#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ - (_mask)) | (_flags), _reg) - -#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ - ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) - -#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ - ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) - -/* Access to PHY registers */ -#define AR5K_PHY_READ(ah, _reg) \ - ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2)) - -#define AR5K_PHY_WRITE(ah, _reg, _val) \ - ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2)) - -/* Access QCU registers per queue */ -#define AR5K_REG_READ_Q(ah, _reg, _queue) \ - (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ - -#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ - ath5k_hw_reg_write(ah, (1 << _queue), _reg) - -#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ - _reg |= 1 << _queue; \ -} while (0) - -#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ - _reg &= ~(1 << _queue); \ -} while (0) - -/* Used while writing initvals */ -#define AR5K_REG_WAIT(_i) do { \ - if (_i % 64) \ - udelay(1); \ -} while (0) - -/* Register dumps are done per operation mode */ -#define AR5K_INI_RFGAIN_5GHZ 0 -#define AR5K_INI_RFGAIN_2GHZ 1 - -/* TODO: Clean this up */ -#define AR5K_INI_VAL_11A 0 -#define AR5K_INI_VAL_11A_TURBO 1 -#define AR5K_INI_VAL_11B 2 -#define AR5K_INI_VAL_11G 3 -#define AR5K_INI_VAL_11G_TURBO 4 -#define AR5K_INI_VAL_XR 0 -#define AR5K_INI_VAL_MAX 5 - -/* Used for BSSID etc manipulation */ -#define AR5K_LOW_ID(_a)( \ -(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24 \ -) - -#define AR5K_HIGH_ID(_a) ((_a)[4] | (_a)[5] << 8) - -/* - * Some tuneable values (these should be changeable by the user) - * TODO: Make use of them and add more options OR use debug/configfs - */ -#define AR5K_TUNE_DMA_BEACON_RESP 2 -#define AR5K_TUNE_SW_BEACON_RESP 10 -#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 -#define AR5K_TUNE_RADAR_ALERT false -#define AR5K_TUNE_MIN_TX_FIFO_THRES 1 -#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_LEN / 64) + 1) -#define AR5K_TUNE_REGISTER_TIMEOUT 20000 -/* Register for RSSI threshold has a mask of 0xff, so 255 seems to - * be the max value. */ -#define AR5K_TUNE_RSSI_THRES 129 -/* This must be set when setting the RSSI threshold otherwise it can - * prevent a reset. If AR5K_RSSI_THR is read after writing to it - * the BMISS_THRES will be seen as 0, seems harware doesn't keep - * track of it. Max value depends on harware. For AR5210 this is just 7. - * For AR5211+ this seems to be up to 255. */ -#define AR5K_TUNE_BMISS_THRES 7 -#define AR5K_TUNE_REGISTER_DWELL_TIME 20000 -#define AR5K_TUNE_BEACON_INTERVAL 100 -#define AR5K_TUNE_AIFS 2 -#define AR5K_TUNE_AIFS_11B 2 -#define AR5K_TUNE_AIFS_XR 0 -#define AR5K_TUNE_CWMIN 15 -#define AR5K_TUNE_CWMIN_11B 31 -#define AR5K_TUNE_CWMIN_XR 3 -#define AR5K_TUNE_CWMAX 1023 -#define AR5K_TUNE_CWMAX_11B 1023 -#define AR5K_TUNE_CWMAX_XR 7 -#define AR5K_TUNE_NOISE_FLOOR -72 -#define AR5K_TUNE_MAX_TXPOWER 63 -#define AR5K_TUNE_DEFAULT_TXPOWER 25 -#define AR5K_TUNE_TPC_TXPOWER false -#define AR5K_TUNE_ANT_DIVERSITY true -#define AR5K_TUNE_HWTXTRIES 4 - -#define AR5K_INIT_CARR_SENSE_EN 1 - -/*Swap RX/TX Descriptor for big endian archs*/ -#if defined(__BIG_ENDIAN) -#define AR5K_INIT_CFG ( \ - AR5K_CFG_SWTD | AR5K_CFG_SWRD \ -) -#else -#define AR5K_INIT_CFG 0x00000000 -#endif - -/* Initial values */ -#define AR5K_INIT_CYCRSSI_THR1 2 -#define AR5K_INIT_TX_LATENCY 502 -#define AR5K_INIT_USEC 39 -#define AR5K_INIT_USEC_TURBO 79 -#define AR5K_INIT_USEC_32 31 -#define AR5K_INIT_SLOT_TIME 396 -#define AR5K_INIT_SLOT_TIME_TURBO 480 -#define AR5K_INIT_ACK_CTS_TIMEOUT 1024 -#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800 -#define AR5K_INIT_PROG_IFS 920 -#define AR5K_INIT_PROG_IFS_TURBO 960 -#define AR5K_INIT_EIFS 3440 -#define AR5K_INIT_EIFS_TURBO 6880 -#define AR5K_INIT_SIFS 560 -#define AR5K_INIT_SIFS_TURBO 480 -#define AR5K_INIT_SH_RETRY 10 -#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY -#define AR5K_INIT_SSH_RETRY 32 -#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY -#define AR5K_INIT_TX_RETRY 10 - -#define AR5K_INIT_TRANSMIT_LATENCY ( \ - (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ - (AR5K_INIT_USEC) \ -) -#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \ - (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ - (AR5K_INIT_USEC_TURBO) \ -) -#define AR5K_INIT_PROTO_TIME_CNTRL ( \ - (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \ - (AR5K_INIT_PROG_IFS) \ -) -#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \ - (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \ - (AR5K_INIT_PROG_IFS_TURBO) \ -) - -/* token to use for aifs, cwmin, cwmax in MadWiFi */ -#define AR5K_TXQ_USEDEFAULT ((u32) -1) - -/* GENERIC CHIPSET DEFINITIONS */ - -/* MAC Chips */ -enum ath5k_version { - AR5K_AR5210 = 0, - AR5K_AR5211 = 1, - AR5K_AR5212 = 2, -}; - -/* PHY Chips */ -enum ath5k_radio { - AR5K_RF5110 = 0, - AR5K_RF5111 = 1, - AR5K_RF5112 = 2, - AR5K_RF2413 = 3, - AR5K_RF5413 = 4, - AR5K_RF2316 = 5, - AR5K_RF2317 = 6, - AR5K_RF2425 = 7, -}; - -/* - * Common silicon revision/version values - */ - -enum ath5k_srev_type { - AR5K_VERSION_MAC, - AR5K_VERSION_RAD, -}; - -struct ath5k_srev_name { - const char *sr_name; - enum ath5k_srev_type sr_type; - u_int sr_val; -}; - -#define AR5K_SREV_UNKNOWN 0xffff - -#define AR5K_SREV_AR5210 0x00 /* Crete */ -#define AR5K_SREV_AR5311 0x10 /* Maui 1 */ -#define AR5K_SREV_AR5311A 0x20 /* Maui 2 */ -#define AR5K_SREV_AR5311B 0x30 /* Spirit */ -#define AR5K_SREV_AR5211 0x40 /* Oahu */ -#define AR5K_SREV_AR5212 0x50 /* Venice */ -#define AR5K_SREV_AR5213 0x55 /* ??? */ -#define AR5K_SREV_AR5213A 0x59 /* Hainan */ -#define AR5K_SREV_AR2413 0x78 /* Griffin lite */ -#define AR5K_SREV_AR2414 0x70 /* Griffin */ -#define AR5K_SREV_AR5424 0x90 /* Condor */ -#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */ -#define AR5K_SREV_AR5414 0xa0 /* Eagle */ -#define AR5K_SREV_AR2415 0xb0 /* Talon */ -#define AR5K_SREV_AR5416 0xc0 /* PCI-E */ -#define AR5K_SREV_AR5418 0xca /* PCI-E */ -#define AR5K_SREV_AR2425 0xe0 /* Swan */ -#define AR5K_SREV_AR2417 0xf0 /* Nala */ - -#define AR5K_SREV_RAD_5110 0x00 -#define AR5K_SREV_RAD_5111 0x10 -#define AR5K_SREV_RAD_5111A 0x15 -#define AR5K_SREV_RAD_2111 0x20 -#define AR5K_SREV_RAD_5112 0x30 -#define AR5K_SREV_RAD_5112A 0x35 -#define AR5K_SREV_RAD_5112B 0x36 -#define AR5K_SREV_RAD_2112 0x40 -#define AR5K_SREV_RAD_2112A 0x45 -#define AR5K_SREV_RAD_2112B 0x46 -#define AR5K_SREV_RAD_2413 0x50 -#define AR5K_SREV_RAD_5413 0x60 -#define AR5K_SREV_RAD_2316 0x70 /* Cobra SoC */ -#define AR5K_SREV_RAD_2317 0x80 -#define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */ -#define AR5K_SREV_RAD_2425 0xa2 -#define AR5K_SREV_RAD_5133 0xc0 - -#define AR5K_SREV_PHY_5211 0x30 -#define AR5K_SREV_PHY_5212 0x41 -#define AR5K_SREV_PHY_5212A 0x42 -#define AR5K_SREV_PHY_5212B 0x43 -#define AR5K_SREV_PHY_2413 0x45 -#define AR5K_SREV_PHY_5413 0x61 -#define AR5K_SREV_PHY_2425 0x70 - -/* IEEE defs */ -#define IEEE80211_MAX_LEN 2500 - -/* TODO add support to mac80211 for vendor-specific rates and modes */ - -/* - * Some of this information is based on Documentation from: - * - * http://madwifi.org/wiki/ChipsetFeatures/SuperAG - * - * Modulation for Atheros' eXtended Range - range enhancing extension that is - * supposed to double the distance an Atheros client device can keep a - * connection with an Atheros access point. This is achieved by increasing - * the receiver sensitivity up to, -105dBm, which is about 20dB above what - * the 802.11 specifications demand. In addition, new (proprietary) data rates - * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. - * - * Please note that can you either use XR or TURBO but you cannot use both, - * they are exclusive. - * - */ -#define MODULATION_XR 0x00000200 -/* - * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a - * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s - * signaling rate achieved through the bonding of two 54Mbit/s 802.11g - * channels. To use this feature your Access Point must also suport it. - * There is also a distinction between "static" and "dynamic" turbo modes: - * - * - Static: is the dumb version: devices set to this mode stick to it until - * the mode is turned off. - * - Dynamic: is the intelligent version, the network decides itself if it - * is ok to use turbo. As soon as traffic is detected on adjacent channels - * (which would get used in turbo mode), or when a non-turbo station joins - * the network, turbo mode won't be used until the situation changes again. - * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which - * monitors the used radio band in order to decide whether turbo mode may - * be used or not. - * - * This article claims Super G sticks to bonding of channels 5 and 6 for - * USA: - * - * http://www.pcworld.com/article/id,113428-page,1/article.html - * - * The channel bonding seems to be driver specific though. In addition to - * deciding what channels will be used, these "Turbo" modes are accomplished - * by also enabling the following features: - * - * - Bursting: allows multiple frames to be sent at once, rather than pausing - * after each frame. Bursting is a standards-compliant feature that can be - * used with any Access Point. - * - Fast frames: increases the amount of information that can be sent per - * frame, also resulting in a reduction of transmission overhead. It is a - * proprietary feature that needs to be supported by the Access Point. - * - Compression: data frames are compressed in real time using a Lempel Ziv - * algorithm. This is done transparently. Once this feature is enabled, - * compression and decompression takes place inside the chipset, without - * putting additional load on the host CPU. - * - */ -#define MODULATION_TURBO 0x00000080 - -enum ath5k_driver_mode { - AR5K_MODE_11A = 0, - AR5K_MODE_11A_TURBO = 1, - AR5K_MODE_11B = 2, - AR5K_MODE_11G = 3, - AR5K_MODE_11G_TURBO = 4, - AR5K_MODE_XR = 0, - AR5K_MODE_MAX = 5 -}; - - -/****************\ - TX DEFINITIONS -\****************/ - -/* - * TX Status descriptor - */ -struct ath5k_tx_status { - u16 ts_seqnum; - u16 ts_tstamp; - u8 ts_status; - u8 ts_rate[4]; - u8 ts_retry[4]; - u8 ts_final_idx; - s8 ts_rssi; - u8 ts_shortretry; - u8 ts_longretry; - u8 ts_virtcol; - u8 ts_antenna; -}; - -#define AR5K_TXSTAT_ALTRATE 0x80 -#define AR5K_TXERR_XRETRY 0x01 -#define AR5K_TXERR_FILT 0x02 -#define AR5K_TXERR_FIFO 0x04 - -/** - * enum ath5k_tx_queue - Queue types used to classify tx queues. - * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue - * @AR5K_TX_QUEUE_DATA: A normal data queue - * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue - * @AR5K_TX_QUEUE_BEACON: The beacon queue - * @AR5K_TX_QUEUE_CAB: The after-beacon queue - * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue - */ -enum ath5k_tx_queue { - AR5K_TX_QUEUE_INACTIVE = 0, - AR5K_TX_QUEUE_DATA, - AR5K_TX_QUEUE_XR_DATA, - AR5K_TX_QUEUE_BEACON, - AR5K_TX_QUEUE_CAB, - AR5K_TX_QUEUE_UAPSD, -}; - -#define AR5K_NUM_TX_QUEUES 10 -#define AR5K_NUM_TX_QUEUES_NOQCU 2 - -/* - * Queue syb-types to classify normal data queues. - * These are the 4 Access Categories as defined in - * WME spec. 0 is the lowest priority and 4 is the - * highest. Normal data that hasn't been classified - * goes to the Best Effort AC. - */ -enum ath5k_tx_queue_subtype { - AR5K_WME_AC_BK = 0, /*Background traffic*/ - AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/ - AR5K_WME_AC_VI, /*Video traffic*/ - AR5K_WME_AC_VO, /*Voice traffic*/ -}; - -/* - * Queue ID numbers as returned by the hw functions, each number - * represents a hw queue. If hw does not support hw queues - * (eg 5210) all data goes in one queue. These match - * d80211 definitions (net80211/MadWiFi don't use them). - */ -enum ath5k_tx_queue_id { - AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, - AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, - AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/ - AR5K_TX_QUEUE_ID_DATA_MAX = 4, /*IEEE80211_TX_QUEUE_DATA4*/ - AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/ - AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/ - AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/ - AR5K_TX_QUEUE_ID_UAPSD = 8, - AR5K_TX_QUEUE_ID_XR_DATA = 9, -}; - -/* - * Flags to set hw queue's parameters... - */ -#define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */ -#define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */ -#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */ -#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */ -#define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */ -#define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */ -#define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */ -#define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */ -#define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */ -#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */ -#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/ -#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */ -#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */ -#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/ - -/* - * A struct to hold tx queue's parameters - */ -struct ath5k_txq_info { - enum ath5k_tx_queue tqi_type; - enum ath5k_tx_queue_subtype tqi_subtype; - u16 tqi_flags; /* Tx queue flags (see above) */ - u32 tqi_aifs; /* Arbitrated Interframe Space */ - s32 tqi_cw_min; /* Minimum Contention Window */ - s32 tqi_cw_max; /* Maximum Contention Window */ - u32 tqi_cbr_period; /* Constant bit rate period */ - u32 tqi_cbr_overflow_limit; - u32 tqi_burst_time; - u32 tqi_ready_time; /* Not used */ -}; - -/* - * Transmit packet types. - * used on tx control descriptor - * TODO: Use them inside base.c corectly - */ -enum ath5k_pkt_type { - AR5K_PKT_TYPE_NORMAL = 0, - AR5K_PKT_TYPE_ATIM = 1, - AR5K_PKT_TYPE_PSPOLL = 2, - AR5K_PKT_TYPE_BEACON = 3, - AR5K_PKT_TYPE_PROBE_RESP = 4, - AR5K_PKT_TYPE_PIFS = 5, -}; - -/* - * TX power and TPC settings - */ -#define AR5K_TXPOWER_OFDM(_r, _v) ( \ - ((0 & 1) << ((_v) + 6)) | \ - (((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \ -) - -#define AR5K_TXPOWER_CCK(_r, _v) ( \ - (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \ -) - -/* - * DMA size definitions (2^n+2) - */ -enum ath5k_dmasize { - AR5K_DMASIZE_4B = 0, - AR5K_DMASIZE_8B, - AR5K_DMASIZE_16B, - AR5K_DMASIZE_32B, - AR5K_DMASIZE_64B, - AR5K_DMASIZE_128B, - AR5K_DMASIZE_256B, - AR5K_DMASIZE_512B -}; - - -/****************\ - RX DEFINITIONS -\****************/ - -/* - * RX Status descriptor - */ -struct ath5k_rx_status { - u16 rs_datalen; - u16 rs_tstamp; - u8 rs_status; - u8 rs_phyerr; - s8 rs_rssi; - u8 rs_keyix; - u8 rs_rate; - u8 rs_antenna; - u8 rs_more; -}; - -#define AR5K_RXERR_CRC 0x01 -#define AR5K_RXERR_PHY 0x02 -#define AR5K_RXERR_FIFO 0x04 -#define AR5K_RXERR_DECRYPT 0x08 -#define AR5K_RXERR_MIC 0x10 -#define AR5K_RXKEYIX_INVALID ((u8) - 1) -#define AR5K_TXKEYIX_INVALID ((u32) - 1) - - -/**************************\ - BEACON TIMERS DEFINITIONS -\**************************/ - -#define AR5K_BEACON_PERIOD 0x0000ffff -#define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/ -#define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/ - -#if 0 -/** - * struct ath5k_beacon_state - Per-station beacon timer state. - * @bs_interval: in TU's, can also include the above flags - * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a - * Point Coordination Function capable AP - */ -struct ath5k_beacon_state { - u32 bs_next_beacon; - u32 bs_next_dtim; - u32 bs_interval; - u8 bs_dtim_period; - u8 bs_cfp_period; - u16 bs_cfp_max_duration; - u16 bs_cfp_du_remain; - u16 bs_tim_offset; - u16 bs_sleep_duration; - u16 bs_bmiss_threshold; - u32 bs_cfp_next; -}; -#endif - - -/* - * TSF to TU conversion: - * - * TSF is a 64bit value in usec (microseconds). - * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of - * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024). - */ -#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) - - -/*******************************\ - GAIN OPTIMIZATION DEFINITIONS -\*******************************/ - -enum ath5k_rfgain { - AR5K_RFGAIN_INACTIVE = 0, - AR5K_RFGAIN_ACTIVE, - AR5K_RFGAIN_READ_REQUESTED, - AR5K_RFGAIN_NEED_CHANGE, -}; - -struct ath5k_gain { - u8 g_step_idx; - u8 g_current; - u8 g_target; - u8 g_low; - u8 g_high; - u8 g_f_corr; - u8 g_state; -}; - -/********************\ - COMMON DEFINITIONS -\********************/ - -#define AR5K_SLOT_TIME_9 396 -#define AR5K_SLOT_TIME_20 880 -#define AR5K_SLOT_TIME_MAX 0xffff - -/* channel_flags */ -#define CHANNEL_CW_INT 0x0008 /* Contention Window interference detected */ -#define CHANNEL_TURBO 0x0010 /* Turbo Channel */ -#define CHANNEL_CCK 0x0020 /* CCK channel */ -#define CHANNEL_OFDM 0x0040 /* OFDM channel */ -#define CHANNEL_2GHZ 0x0080 /* 2GHz channel. */ -#define CHANNEL_5GHZ 0x0100 /* 5GHz channel */ -#define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */ -#define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */ -#define CHANNEL_XR 0x0800 /* XR channel */ - -#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM) -#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK) -#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM) -#define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO) -#define CHANNEL_TG (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO) -#define CHANNEL_108A CHANNEL_T -#define CHANNEL_108G CHANNEL_TG -#define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR) - -#define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \ - CHANNEL_TURBO) - -#define CHANNEL_ALL_NOTURBO (CHANNEL_ALL & ~CHANNEL_TURBO) -#define CHANNEL_MODES CHANNEL_ALL - -/* - * Used internaly for reset_tx_queue). - * Also see struct struct ieee80211_channel. - */ -#define IS_CHAN_XR(_c) ((_c.hw_value & CHANNEL_XR) != 0) -#define IS_CHAN_B(_c) ((_c.hw_value & CHANNEL_B) != 0) - -/* - * The following structure is used to map 2GHz channels to - * 5GHz Atheros channels. - * TODO: Clean up - */ -struct ath5k_athchan_2ghz { - u32 a2_flags; - u16 a2_athchan; -}; - - -/******************\ - RATE DEFINITIONS -\******************/ - -/** - * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32. - * - * The rate code is used to get the RX rate or set the TX rate on the - * hardware descriptors. It is also used for internal modulation control - * and settings. - * - * This is the hardware rate map we are aware of: - * - * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 - * rate_kbps 3000 1000 ? ? ? 2000 500 48000 - * - * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 - * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ? - * - * rate_code 17 18 19 20 21 22 23 24 - * rate_kbps ? ? ? ? ? ? ? 11000 - * - * rate_code 25 26 27 28 29 30 31 32 - * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ? - * - * "S" indicates CCK rates with short preamble. - * - * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the - * lowest 4 bits, so they are the same as below with a 0xF mask. - * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). - * We handle this in ath5k_setup_bands(). - */ -#define AR5K_MAX_RATES 32 - -/* B */ -#define ATH5K_RATE_CODE_1M 0x1B -#define ATH5K_RATE_CODE_2M 0x1A -#define ATH5K_RATE_CODE_5_5M 0x19 -#define ATH5K_RATE_CODE_11M 0x18 -/* A and G */ -#define ATH5K_RATE_CODE_6M 0x0B -#define ATH5K_RATE_CODE_9M 0x0F -#define ATH5K_RATE_CODE_12M 0x0A -#define ATH5K_RATE_CODE_18M 0x0E -#define ATH5K_RATE_CODE_24M 0x09 -#define ATH5K_RATE_CODE_36M 0x0D -#define ATH5K_RATE_CODE_48M 0x08 -#define ATH5K_RATE_CODE_54M 0x0C -/* XR */ -#define ATH5K_RATE_CODE_XR_500K 0x07 -#define ATH5K_RATE_CODE_XR_1M 0x02 -#define ATH5K_RATE_CODE_XR_2M 0x06 -#define ATH5K_RATE_CODE_XR_3M 0x01 - -/* adding this flag to rate_code enables short preamble */ -#define AR5K_SET_SHORT_PREAMBLE 0x04 - -/* - * Crypto definitions - */ - -#define AR5K_KEYCACHE_SIZE 8 - -/***********************\ - HW RELATED DEFINITIONS -\***********************/ - -/* - * Misc definitions - */ -#define AR5K_RSSI_EP_MULTIPLIER (1<<7) - -#define AR5K_ASSERT_ENTRY(_e, _s) do { \ - if (_e >= _s) \ - return (false); \ -} while (0) - -/* - * Hardware interrupt abstraction - */ - -/** - * enum ath5k_int - Hardware interrupt masks helpers - * - * @AR5K_INT_RX: mask to identify received frame interrupts, of type - * AR5K_ISR_RXOK or AR5K_ISR_RXERR - * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?) - * @AR5K_INT_RXNOFRM: No frame received (?) - * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The - * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's - * LinkPtr is NULL. For more details, refer to: - * http://www.freepatentsonline.com/20030225739.html - * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors). - * Note that Rx overrun is not always fatal, on some chips we can continue - * operation without reseting the card, that's why int_fatal is not - * common for all chips. - * @AR5K_INT_TX: mask to identify received frame interrupts, of type - * AR5K_ISR_TXOK or AR5K_ISR_TXERR - * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?) - * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold - * We currently do increments on interrupt by - * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2 - * @AR5K_INT_MIB: Indicates the Management Information Base counters should be - * checked. We should do this with ath5k_hw_update_mib_counters() but - * it seems we should also then do some noise immunity work. - * @AR5K_INT_RXPHY: RX PHY Error - * @AR5K_INT_RXKCM: RX Key cache miss - * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a - * beacon that must be handled in software. The alternative is if you - * have VEOL support, in that case you let the hardware deal with things. - * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing - * beacons from the AP have associated with, we should probably try to - * reassociate. When in IBSS mode this might mean we have not received - * any beacons from any local stations. Note that every station in an - * IBSS schedules to send beacons at the Target Beacon Transmission Time - * (TBTT) with a random backoff. - * @AR5K_INT_BNR: Beacon Not Ready interrupt - ?? - * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now - * until properly handled - * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA - * errors. These types of errors we can enable seem to be of type - * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR. - * @AR5K_INT_GLOBAL: Used to clear and set the IER - * @AR5K_INT_NOCARD: signals the card has been removed - * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same - * bit value - * - * These are mapped to take advantage of some common bits - * between the MACs, to be able to set intr properties - * easier. Some of them are not used yet inside hw.c. Most map - * to the respective hw interrupt value as they are common amogst different - * MACs. - */ -enum ath5k_int { - AR5K_INT_RXOK = 0x00000001, - AR5K_INT_RXDESC = 0x00000002, - AR5K_INT_RXERR = 0x00000004, - AR5K_INT_RXNOFRM = 0x00000008, - AR5K_INT_RXEOL = 0x00000010, - AR5K_INT_RXORN = 0x00000020, - AR5K_INT_TXOK = 0x00000040, - AR5K_INT_TXDESC = 0x00000080, - AR5K_INT_TXERR = 0x00000100, - AR5K_INT_TXNOFRM = 0x00000200, - AR5K_INT_TXEOL = 0x00000400, - AR5K_INT_TXURN = 0x00000800, - AR5K_INT_MIB = 0x00001000, - AR5K_INT_SWI = 0x00002000, - AR5K_INT_RXPHY = 0x00004000, - AR5K_INT_RXKCM = 0x00008000, - AR5K_INT_SWBA = 0x00010000, - AR5K_INT_BRSSI = 0x00020000, - AR5K_INT_BMISS = 0x00040000, - AR5K_INT_FATAL = 0x00080000, /* Non common */ - AR5K_INT_BNR = 0x00100000, /* Non common */ - AR5K_INT_TIM = 0x00200000, /* Non common */ - AR5K_INT_DTIM = 0x00400000, /* Non common */ - AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */ - AR5K_INT_GPIO = 0x01000000, - AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */ - AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */ - AR5K_INT_RX_DOPPLER = 0x08000000, /* Non common */ - AR5K_INT_QCBRORN = 0x10000000, /* Non common */ - AR5K_INT_QCBRURN = 0x20000000, /* Non common */ - AR5K_INT_QTRIG = 0x40000000, /* Non common */ - AR5K_INT_GLOBAL = 0x80000000, - - AR5K_INT_COMMON = AR5K_INT_RXOK - | AR5K_INT_RXDESC - | AR5K_INT_RXERR - | AR5K_INT_RXNOFRM - | AR5K_INT_RXEOL - | AR5K_INT_RXORN - | AR5K_INT_TXOK - | AR5K_INT_TXDESC - | AR5K_INT_TXERR - | AR5K_INT_TXNOFRM - | AR5K_INT_TXEOL - | AR5K_INT_TXURN - | AR5K_INT_MIB - | AR5K_INT_SWI - | AR5K_INT_RXPHY - | AR5K_INT_RXKCM - | AR5K_INT_SWBA - | AR5K_INT_BRSSI - | AR5K_INT_BMISS - | AR5K_INT_GPIO - | AR5K_INT_GLOBAL, - - AR5K_INT_NOCARD = 0xffffffff -}; - -/* - * Power management - */ -enum ath5k_power_mode { - AR5K_PM_UNDEFINED = 0, - AR5K_PM_AUTO, - AR5K_PM_AWAKE, - AR5K_PM_FULL_SLEEP, - AR5K_PM_NETWORK_SLEEP, -}; - -/* - * These match net80211 definitions (not used in - * mac80211). - * TODO: Clean this up - */ -#define AR5K_LED_INIT 0 /*IEEE80211_S_INIT*/ -#define AR5K_LED_SCAN 1 /*IEEE80211_S_SCAN*/ -#define AR5K_LED_AUTH 2 /*IEEE80211_S_AUTH*/ -#define AR5K_LED_ASSOC 3 /*IEEE80211_S_ASSOC*/ -#define AR5K_LED_RUN 4 /*IEEE80211_S_RUN*/ - -/* GPIO-controlled software LED */ -#define AR5K_SOFTLED_PIN 0 -#define AR5K_SOFTLED_ON 0 -#define AR5K_SOFTLED_OFF 1 - -/* - * Chipset capabilities -see ath5k_hw_get_capability- - * get_capability function is not yet fully implemented - * in ath5k so most of these don't work yet... - * TODO: Implement these & merge with _TUNE_ stuff above - */ -enum ath5k_capability_type { - AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */ - AR5K_CAP_TKIP_MIC = 2, /* Can handle TKIP MIC in hardware */ - AR5K_CAP_TKIP_SPLIT = 3, /* TKIP uses split keys */ - AR5K_CAP_PHYCOUNTERS = 4, /* PHY error counters */ - AR5K_CAP_DIVERSITY = 5, /* Supports fast diversity */ - AR5K_CAP_NUM_TXQUEUES = 6, /* Used to get max number of hw txqueues */ - AR5K_CAP_VEOL = 7, /* Supports virtual EOL */ - AR5K_CAP_COMPRESSION = 8, /* Supports compression */ - AR5K_CAP_BURST = 9, /* Supports packet bursting */ - AR5K_CAP_FASTFRAME = 10, /* Supports fast frames */ - AR5K_CAP_TXPOW = 11, /* Used to get global tx power limit */ - AR5K_CAP_TPC = 12, /* Can do per-packet tx power control (needed for 802.11a) */ - AR5K_CAP_BSSIDMASK = 13, /* Supports bssid mask */ - AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */ - AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */ - AR5K_CAP_XR = 16, /* Supports XR mode */ - AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */ - AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */ - AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */ - AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */ -}; - - -/* XXX: we *may* move cap_range stuff to struct wiphy */ -struct ath5k_capabilities { - /* - * Supported PHY modes - * (ie. CHANNEL_A, CHANNEL_B, ...) - */ - DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX); - - /* - * Frequency range (without regulation restrictions) - */ - struct { - u16 range_2ghz_min; - u16 range_2ghz_max; - u16 range_5ghz_min; - u16 range_5ghz_max; - } cap_range; - - /* - * Values stored in the EEPROM (some of them...) - */ - struct ath5k_eeprom_info cap_eeprom; - - /* - * Queue information - */ - struct { - u8 q_tx_num; - } cap_queues; -}; - - -/***************************************\ - HARDWARE ABSTRACTION LAYER STRUCTURE -\***************************************/ - -/* - * Misc defines - */ - -#define AR5K_MAX_GPIO 10 -#define AR5K_MAX_RF_BANKS 8 - -/* TODO: Clean up and merge with ath5k_softc */ -struct ath5k_hw { - u32 ah_magic; - - struct ath5k_softc *ah_sc; - void __iomem *ah_iobase; - - enum ath5k_int ah_imr; - - enum nl80211_iftype ah_op_mode; - enum ath5k_power_mode ah_power_mode; - struct ieee80211_channel ah_current_channel; - bool ah_turbo; - bool ah_calibration; - bool ah_running; - bool ah_single_chip; - bool ah_combined_mic; - - u32 ah_mac_srev; - u16 ah_mac_version; - u16 ah_mac_revision; - u16 ah_phy_revision; - u16 ah_radio_5ghz_revision; - u16 ah_radio_2ghz_revision; - - enum ath5k_version ah_version; - enum ath5k_radio ah_radio; - u32 ah_phy; - - bool ah_5ghz; - bool ah_2ghz; - -#define ah_modes ah_capabilities.cap_mode -#define ah_ee_version ah_capabilities.cap_eeprom.ee_version - - u32 ah_atim_window; - u32 ah_aifs; - u32 ah_cw_min; - u32 ah_cw_max; - bool ah_software_retry; - u32 ah_limit_tx_retries; - - u32 ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; - bool ah_ant_diversity; - - u8 ah_sta_id[ETH_ALEN]; - - /* Current BSSID we are trying to assoc to / create. - * This is passed by mac80211 on config_interface() and cached here for - * use in resets */ - u8 ah_bssid[ETH_ALEN]; - u8 ah_bssid_mask[ETH_ALEN]; - - u32 ah_gpio[AR5K_MAX_GPIO]; - int ah_gpio_npins; - - struct ath_regulatory ah_regulatory; - struct ath5k_capabilities ah_capabilities; - - struct ath5k_txq_info ah_txq[AR5K_NUM_TX_QUEUES]; - u32 ah_txq_status; - u32 ah_txq_imr_txok; - u32 ah_txq_imr_txerr; - u32 ah_txq_imr_txurn; - u32 ah_txq_imr_txdesc; - u32 ah_txq_imr_txeol; - u32 ah_txq_imr_cbrorn; - u32 ah_txq_imr_cbrurn; - u32 ah_txq_imr_qtrig; - u32 ah_txq_imr_nofrm; - u32 ah_txq_isr; - u32 *ah_rf_banks; - size_t ah_rf_banks_size; - size_t ah_rf_regs_count; - struct ath5k_gain ah_gain; - u8 ah_offset[AR5K_MAX_RF_BANKS]; - - - struct { - /* Temporary tables used for interpolation */ - u8 tmpL[AR5K_EEPROM_N_PD_GAINS] - [AR5K_EEPROM_POWER_TABLE_SIZE]; - u8 tmpR[AR5K_EEPROM_N_PD_GAINS] - [AR5K_EEPROM_POWER_TABLE_SIZE]; - u8 txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2]; - u16 txp_rates_power_table[AR5K_MAX_RATES]; - u8 txp_min_idx; - bool txp_tpc; - /* Values in 0.25dB units */ - s16 txp_min_pwr; - s16 txp_max_pwr; - s16 txp_offset; - s16 txp_ofdm; - /* Values in dB units */ - s16 txp_cck_ofdm_pwr_delta; - s16 txp_cck_ofdm_gainf_delta; - } ah_txpower; - - struct { - bool r_enabled; - int r_last_alert; - struct ieee80211_channel r_last_channel; - } ah_radar; - - /* noise floor from last periodic calibration */ - s32 ah_noise_floor; - - /* - * Function pointers - */ - int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc, - u32 size, unsigned int flags); - int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, - unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, - unsigned int, unsigned int, unsigned int, unsigned int, - unsigned int, unsigned int, unsigned int); - int (*ah_setup_mrr_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, - unsigned int, unsigned int, unsigned int, unsigned int, - unsigned int, unsigned int); - int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_tx_status *); - int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *, - struct ath5k_rx_status *); -}; - -/* - * Prototypes - */ - -/* Attach/Detach Functions */ -extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version); -extern void ath5k_hw_detach(struct ath5k_hw *ah); - -/* LED functions */ -extern int ath5k_init_leds(struct ath5k_softc *sc); -extern void ath5k_led_enable(struct ath5k_softc *sc); -extern void ath5k_led_off(struct ath5k_softc *sc); -extern void ath5k_unregister_leds(struct ath5k_softc *sc); - -/* Reset Functions */ -extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial); -extern int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool change_channel); -/* Power management functions */ -extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration); - -/* DMA Related Functions */ -extern void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); -extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah); -extern u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); -extern void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); -extern int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); -extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue); -extern u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); -extern int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, - u32 phys_addr); -extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase); -/* Interrupt handling */ -extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah); -extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); -extern enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum -ath5k_int new_mask); -extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats); - -/* EEPROM access functions */ -extern int ath5k_eeprom_init(struct ath5k_hw *ah); -extern void ath5k_eeprom_detach(struct ath5k_hw *ah); -extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac); -extern bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah); - -/* Protocol Control Unit Functions */ -extern int ath5k_hw_set_opmode(struct ath5k_hw *ah); -/* BSSID Functions */ -extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac); -extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); -extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id); -extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); -/* Receive start/stop functions */ -extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); -extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); -/* RX Filter functions */ -extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); -extern int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index); -extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index); -extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); -extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); -/* Beacon control functions */ -extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah); -extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); -extern void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64); -extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah); -extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval); -#if 0 -extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state); -extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah); -extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr); -#endif -/* ACK bit rate */ -void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high); -/* ACK/CTS Timeouts */ -extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout); -extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah); -extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout); -extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah); -/* Key table (WEP) functions */ -extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry); -extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry); -extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac); -extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac); - -/* Queue Control Unit, DFS Control Unit Functions */ -extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info); -extern int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue, - const struct ath5k_txq_info *queue_info); -extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, - enum ath5k_tx_queue queue_type, - struct ath5k_txq_info *queue_info); -extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue); -extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue); -extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue); -extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah); -extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); - -/* Hardware Descriptor Functions */ -extern int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); - -/* GPIO Functions */ -extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state); -extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); -extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); -extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); -extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); -extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level); - -/* Misc functions */ -int ath5k_hw_set_capabilities(struct ath5k_hw *ah); -extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result); -extern int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); -extern int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); - -/* Initial register settings functions */ -extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel); - -/* Initialize RF */ -extern int ath5k_hw_rfregs_init(struct ath5k_hw *ah, - struct ieee80211_channel *channel, - unsigned int mode); -extern int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq); -extern enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah); -extern int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah); -/* PHY/RF channel functions */ -extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags); -extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel); -/* PHY calibration */ -extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel); -extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq); -/* Misc PHY functions */ -extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); -extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant); -extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah); -extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); -/* TX power setup */ -extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower); -extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 ee_mode, u8 txpower); - -/* - * Functions used internaly - */ - -/* - * Translate usec to hw clock units - * TODO: Half/quarter rate - */ -static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo) -{ - return turbo ? (usec * 80) : (usec * 40); -} - -/* - * Translate hw clock units to usec - * TODO: Half/quarter rate - */ -static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo) -{ - return turbo ? (clock / 80) : (clock / 40); -} - -/* - * Read from a register - */ -static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) -{ - return ioread32(ah->ah_iobase + reg); -} - -/* - * Write to a register - */ -static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) -{ - iowrite32(val, ah->ah_iobase + reg); -} - -#if defined(_ATH5K_RESET) || defined(_ATH5K_PHY) -/* - * Check if a register write has been completed - */ -static int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, - u32 val, bool is_set) -{ - int i; - u32 data; - - for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) { - data = ath5k_hw_reg_read(ah, reg); - if (is_set && (data & flag)) - break; - else if ((data & flag) == val) - break; - udelay(15); - } - - return (i <= 0) ? -EAGAIN : 0; -} -#endif - -static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) -{ - u32 retval = 0, bit, i; - - for (i = 0; i < bits; i++) { - bit = (val >> i) & 1; - retval = (retval << 1) | bit; - } - - return retval; -} - -static inline int ath5k_pad_size(int hdrlen) -{ - return (hdrlen < 24) ? 0 : hdrlen & 3; -} - -#endif -- cgit v1.2.1