From 6995fb805ed5de852a7d49413730980bc7173e82 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Mon, 4 Jun 2012 16:28:52 +0530 Subject: ath9k: improve BT FTP/PAN performance When BT FTP/PAN transmits while WLAN is idle, the one of 9462 chain often picks up BT's tx signal and starts receiving. If the current weight is set to be higher than BT tx, BT tx will be aborted and this also degrades BT performance. Hence lower WLAN rx priority in this case only when there are no WLAN traffic. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/btcoex.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/net/wireless/ath/ath9k/btcoex.c') diff --git a/drivers/net/wireless/ath/ath9k/btcoex.c b/drivers/net/wireless/ath/ath9k/btcoex.c index 1ca6da80d4ad..acd437384fe4 100644 --- a/drivers/net/wireless/ath/ath9k/btcoex.c +++ b/drivers/net/wireless/ath/ath9k/btcoex.c @@ -336,10 +336,16 @@ static void ar9003_btcoex_bt_stomp(struct ath_hw *ah, enum ath_stomp_type stomp_type) { struct ath_btcoex_hw *btcoex = &ah->btcoex_hw; - const u32 *weight = AR_SREV_9462(ah) ? ar9003_wlan_weights[stomp_type] : - ar9462_wlan_weights[stomp_type]; + const u32 *weight = ar9003_wlan_weights[stomp_type]; int i; + if (AR_SREV_9462(ah)) { + if ((stomp_type == ATH_BTCOEX_STOMP_LOW) && + btcoex->mci.stomp_ftp) + stomp_type = ATH_BTCOEX_STOMP_LOW_FTP; + weight = ar9462_wlan_weights[stomp_type]; + } + for (i = 0; i < AR9300_NUM_WLAN_WEIGHTS; i++) { btcoex->bt_weight[i] = AR9300_BT_WGHT; btcoex->wlan_weight[i] = weight[i]; -- cgit v1.2.1