From 74d79a2e30c476ccc7d45ecf978f38d815287f81 Mon Sep 17 00:00:00 2001 From: Woojung Huh Date: Mon, 25 Apr 2016 22:22:32 +0000 Subject: lan78xx: fix statistics counter error Fix rx_bytes, tx_bytes and tx_frames error in netdev.stats. - rx_bytes counted bytes excluding size of struct ethhdr. - tx_packets didn't count multiple packets in a single urb - tx_bytes included 8 bytes of extra commands. Signed-off-by: Woojung Huh Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers/net/usb/lan78xx.c') diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index f20890ee03f3..0460b81a8784 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -269,6 +269,7 @@ struct skb_data { /* skb->cb is one of these */ struct lan78xx_net *dev; enum skb_state state; size_t length; + int num_of_packet; }; struct usb_context { @@ -2464,7 +2465,7 @@ static void tx_complete(struct urb *urb) struct lan78xx_net *dev = entry->dev; if (urb->status == 0) { - dev->net->stats.tx_packets++; + dev->net->stats.tx_packets += entry->num_of_packet; dev->net->stats.tx_bytes += entry->length; } else { dev->net->stats.tx_errors++; @@ -2681,10 +2682,11 @@ void lan78xx_skb_return(struct lan78xx_net *dev, struct sk_buff *skb) return; } - skb->protocol = eth_type_trans(skb, dev->net); dev->net->stats.rx_packets++; dev->net->stats.rx_bytes += skb->len; + skb->protocol = eth_type_trans(skb, dev->net); + netif_dbg(dev, rx_status, dev->net, "< rx, len %zu, type 0x%x\n", skb->len + sizeof(struct ethhdr), skb->protocol); memset(skb->cb, 0, sizeof(struct skb_data)); @@ -2934,13 +2936,16 @@ static void lan78xx_tx_bh(struct lan78xx_net *dev) skb_totallen = 0; pkt_cnt = 0; + count = 0; + length = 0; for (skb = tqp->next; pkt_cnt < tqp->qlen; skb = skb->next) { if (skb_is_gso(skb)) { if (pkt_cnt) { /* handle previous packets first */ break; } - length = skb->len; + count = 1; + length = skb->len - TX_OVERHEAD; skb2 = skb_dequeue(tqp); goto gso_skb; } @@ -2961,14 +2966,13 @@ static void lan78xx_tx_bh(struct lan78xx_net *dev) for (count = pos = 0; count < pkt_cnt; count++) { skb2 = skb_dequeue(tqp); if (skb2) { + length += (skb2->len - TX_OVERHEAD); memcpy(skb->data + pos, skb2->data, skb2->len); pos += roundup(skb2->len, sizeof(u32)); dev_kfree_skb(skb2); } } - length = skb_totallen; - gso_skb: urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { @@ -2980,6 +2984,7 @@ gso_skb: entry->urb = urb; entry->dev = dev; entry->length = length; + entry->num_of_packet = count; spin_lock_irqsave(&dev->txq.lock, flags); ret = usb_autopm_get_interface_async(dev->intf); -- cgit v1.2.1 From 14437e3fa284f465dbbc8611fd4331ca8d60e986 Mon Sep 17 00:00:00 2001 From: Woojung Huh Date: Mon, 25 Apr 2016 22:22:36 +0000 Subject: lan78xx: workaround of forced 100 Full/Half duplex mode error At forced 100 Full & Half duplex mode, chip may fail to set mode correctly when cable is switched between long(~50+m) and short one. As workaround, set to 10 before setting to 100 at forced 100 F/H mode. Signed-off-by: Woojung Huh Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) (limited to 'drivers/net/usb/lan78xx.c') diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 0460b81a8784..f64778ad9753 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -1804,7 +1804,34 @@ static void lan78xx_remove_mdio(struct lan78xx_net *dev) static void lan78xx_link_status_change(struct net_device *net) { - /* nothing to do */ + struct phy_device *phydev = net->phydev; + int ret, temp; + + /* At forced 100 F/H mode, chip may fail to set mode correctly + * when cable is switched between long(~50+m) and short one. + * As workaround, set to 10 before setting to 100 + * at forced 100 F/H mode. + */ + if (!phydev->autoneg && (phydev->speed == 100)) { + /* disable phy interrupt */ + temp = phy_read(phydev, LAN88XX_INT_MASK); + temp &= ~LAN88XX_INT_MASK_MDINTPIN_EN_; + ret = phy_write(phydev, LAN88XX_INT_MASK, temp); + + temp = phy_read(phydev, MII_BMCR); + temp &= ~(BMCR_SPEED100 | BMCR_SPEED1000); + phy_write(phydev, MII_BMCR, temp); /* set to 10 first */ + temp |= BMCR_SPEED100; + phy_write(phydev, MII_BMCR, temp); /* set to 100 later */ + + /* clear pending interrupt generated while workaround */ + temp = phy_read(phydev, LAN88XX_INT_STS); + + /* enable phy interrupt back */ + temp = phy_read(phydev, LAN88XX_INT_MASK); + temp |= LAN88XX_INT_MASK_MDINTPIN_EN_; + ret = phy_write(phydev, LAN88XX_INT_MASK, temp); + } } static int lan78xx_phy_init(struct lan78xx_net *dev) -- cgit v1.2.1