From 264bb4fab1a0952b4eef4df5b9e90bc050a2d1e6 Mon Sep 17 00:00:00 2001 From: Mike McCormack Date: Fri, 14 Aug 2009 05:15:14 +0000 Subject: sky2: Reset tx train after interrupts disabled. Reseting the tx chain too soon results in invalid tx queue positions being delivered in the status queue. This also makes sure there's no overlap between the cleanup done by sky2_tx_clean() and sky2_tx_done(). Signed-off-by: Mike McCormack Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/sky2.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers/net/sky2.c') diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 768ed47da9bd..b75b48e83970 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1811,11 +1811,8 @@ static void sky2_tx_clean(struct net_device *dev) netif_tx_unlock_bh(dev); } -static void sky2_tx_reset(struct sky2_port* sky2) +static void sky2_tx_reset(struct sky2_hw *hw, unsigned port) { - unsigned port = sky2->port; - struct sky2_hw *hw = sky2->hw; - /* Disable Force Sync bit and Enable Alloc bit */ sky2_write8(hw, SK_REG(port, TXA_CTRL), TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); @@ -1877,8 +1874,6 @@ static int sky2_down(struct net_device *dev) && port == 0 && hw->dev[1] && netif_running(hw->dev[1]))) sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET); - sky2_tx_reset(sky2); - sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); /* Force any delayed status interrrupt and NAPI */ @@ -1903,6 +1898,8 @@ static int sky2_down(struct net_device *dev) /* turn off LED's */ sky2_write16(hw, B0_Y2LED, LED_STAT_OFF); + sky2_tx_reset(hw, port); + sky2_tx_clean(dev); sky2_rx_clean(sky2); -- cgit v1.2.1