From 9e2ecbeb250dee67f4bd06a18637c120b48a4865 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Sat, 18 May 2013 06:26:52 +0000 Subject: tg3: Add ethtool_eee struct and tg3_setup_eee() Add an eee structure and update it with eee settings. This will be used for set/get_eee operations. Add common function tg3_setup_eee() that will be used in the subsequent patches. Reviewed-by: Ben Li Signed-off-by: Michael Chan Signed-off-by: Nithin Nayak Sujir Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 91 +++++++++++++++++++++++-------------- 1 file changed, 58 insertions(+), 33 deletions(-) (limited to 'drivers/net/ethernet/broadcom/tg3.c') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 728d42ab2a76..26804db1f884 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -4249,6 +4249,16 @@ static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl) /* Advertise 1000-BaseT EEE ability */ if (advertise & ADVERTISED_1000baseT_Full) val |= MDIO_AN_EEE_ADV_1000T; + + if (!tp->eee.eee_enabled) { + val = 0; + tp->eee.advertised = 0; + } else { + tp->eee.advertised = advertise & + (ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Full); + } + err = tg3_phy_cl45_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val); if (err) val = 0; @@ -4613,6 +4623,42 @@ static void tg3_clear_mac_status(struct tg3 *tp) udelay(40); } +static void tg3_setup_eee(struct tg3 *tp) +{ + u32 val; + + val = TG3_CPMU_EEE_LNKIDL_PCIE_NL0 | + TG3_CPMU_EEE_LNKIDL_UART_IDL; + if (tg3_chip_rev_id(tp) == CHIPREV_ID_57765_A0) + val |= TG3_CPMU_EEE_LNKIDL_APE_TX_MT; + + tw32_f(TG3_CPMU_EEE_LNKIDL_CTRL, val); + + tw32_f(TG3_CPMU_EEE_CTRL, + TG3_CPMU_EEE_CTRL_EXIT_20_1_US); + + val = TG3_CPMU_EEEMD_ERLY_L1_XIT_DET | + (tp->eee.tx_lpi_enabled ? TG3_CPMU_EEEMD_LPI_IN_TX : 0) | + TG3_CPMU_EEEMD_LPI_IN_RX | + TG3_CPMU_EEEMD_EEE_ENABLE; + + if (tg3_asic_rev(tp) != ASIC_REV_5717) + val |= TG3_CPMU_EEEMD_SND_IDX_DET_EN; + + if (tg3_flag(tp, ENABLE_APE)) + val |= TG3_CPMU_EEEMD_APE_TX_DET_EN; + + tw32_f(TG3_CPMU_EEE_MODE, tp->eee.eee_enabled ? val : 0); + + tw32_f(TG3_CPMU_EEE_DBTMR1, + TG3_CPMU_DBTMR1_PCIEXIT_2047US | + (tp->eee.tx_lpi_timer & 0xffff)); + + tw32_f(TG3_CPMU_EEE_DBTMR2, + TG3_CPMU_DBTMR2_APE_TX_2047US | + TG3_CPMU_DBTMR2_TXIDXEQ_2047US); +} + static int tg3_setup_copper_phy(struct tg3 *tp, bool force_reset) { bool current_link_up; @@ -9448,38 +9494,8 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy) tg3_abort_hw(tp, 1); /* Enable MAC control of LPI */ - if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) { - val = TG3_CPMU_EEE_LNKIDL_PCIE_NL0 | - TG3_CPMU_EEE_LNKIDL_UART_IDL; - if (tg3_chip_rev_id(tp) == CHIPREV_ID_57765_A0) - val |= TG3_CPMU_EEE_LNKIDL_APE_TX_MT; - - tw32_f(TG3_CPMU_EEE_LNKIDL_CTRL, val); - - tw32_f(TG3_CPMU_EEE_CTRL, - TG3_CPMU_EEE_CTRL_EXIT_20_1_US); - - val = TG3_CPMU_EEEMD_ERLY_L1_XIT_DET | - TG3_CPMU_EEEMD_LPI_IN_TX | - TG3_CPMU_EEEMD_LPI_IN_RX | - TG3_CPMU_EEEMD_EEE_ENABLE; - - if (tg3_asic_rev(tp) != ASIC_REV_5717) - val |= TG3_CPMU_EEEMD_SND_IDX_DET_EN; - - if (tg3_flag(tp, ENABLE_APE)) - val |= TG3_CPMU_EEEMD_APE_TX_DET_EN; - - tw32_f(TG3_CPMU_EEE_MODE, val); - - tw32_f(TG3_CPMU_EEE_DBTMR1, - TG3_CPMU_DBTMR1_PCIEXIT_2047US | - TG3_CPMU_DBTMR1_LNKIDLE_2047US); - - tw32_f(TG3_CPMU_EEE_DBTMR2, - TG3_CPMU_DBTMR2_APE_TX_2047US | - TG3_CPMU_DBTMR2_TXIDXEQ_2047US); - } + if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) + tg3_setup_eee(tp); if ((tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN) && !(tp->phy_flags & TG3_PHYFLG_USER_CONFIGURED)) { @@ -14946,9 +14962,18 @@ static int tg3_phy_probe(struct tg3 *tp) (tg3_asic_rev(tp) == ASIC_REV_5717 && tg3_chip_rev_id(tp) != CHIPREV_ID_5717_A0) || (tg3_asic_rev(tp) == ASIC_REV_57765 && - tg3_chip_rev_id(tp) != CHIPREV_ID_57765_A0))) + tg3_chip_rev_id(tp) != CHIPREV_ID_57765_A0))) { tp->phy_flags |= TG3_PHYFLG_EEE_CAP; + tp->eee.supported = SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full; + tp->eee.advertised = ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Full; + tp->eee.eee_enabled = 1; + tp->eee.tx_lpi_enabled = 1; + tp->eee.tx_lpi_timer = TG3_CPMU_DBTMR1_LNKIDLE_2047US; + } + tg3_phy_init_link_config(tp); if (!(tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN) && -- cgit v1.2.1 From 400dfbaa8d444a29056b051a3d7082dc611e3b12 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Sat, 18 May 2013 06:26:53 +0000 Subject: tg3: Add tg3_eee_pull_config() function Add tg3_eee_pull_config() to pull the settings from the hardware and populate the eee structure. If Link Flap Avoidance is enabled, we pull the eee settings from the hw so as not to cause a phy reset on eee config mismatch later. This requires moving down tg3_setup_eee() below the tg3_pull_config() to not trample existing settings. Reviewed-by: Ben Li Signed-off-by: Michael Chan Signed-off-by: Nithin Nayak Sujir Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 56 +++++++++++++++++++++++++++++++------ 1 file changed, 47 insertions(+), 9 deletions(-) (limited to 'drivers/net/ethernet/broadcom/tg3.c') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 26804db1f884..3e7bc3837ef9 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -2320,6 +2320,46 @@ static void tg3_phy_apply_otp(struct tg3 *tp) tg3_phy_toggle_auxctl_smdsp(tp, false); } +static void tg3_eee_pull_config(struct tg3 *tp, struct ethtool_eee *eee) +{ + u32 val; + struct ethtool_eee *dest = &tp->eee; + + if (!(tp->phy_flags & TG3_PHYFLG_EEE_CAP)) + return; + + if (eee) + dest = eee; + + if (tg3_phy_cl45_read(tp, MDIO_MMD_AN, TG3_CL45_D7_EEERES_STAT, &val)) + return; + + /* Pull eee_active */ + if (val == TG3_CL45_D7_EEERES_STAT_LP_1000T || + val == TG3_CL45_D7_EEERES_STAT_LP_100TX) { + dest->eee_active = 1; + } else + dest->eee_active = 0; + + /* Pull lp advertised settings */ + if (tg3_phy_cl45_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE, &val)) + return; + dest->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val); + + /* Pull advertised and eee_enabled settings */ + if (tg3_phy_cl45_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, &val)) + return; + dest->eee_enabled = !!val; + dest->advertised = mmd_eee_adv_to_ethtool_adv_t(val); + + /* Pull tx_lpi_enabled */ + val = tr32(TG3_CPMU_EEE_MODE); + dest->tx_lpi_enabled = !!(val & TG3_CPMU_EEEMD_LPI_IN_TX); + + /* Pull lpi timer value */ + dest->tx_lpi_timer = tr32(TG3_CPMU_EEE_DBTMR1) & 0xffff; +} + static void tg3_phy_eee_adjust(struct tg3 *tp, bool current_link_up) { u32 val; @@ -2343,11 +2383,8 @@ static void tg3_phy_eee_adjust(struct tg3 *tp, bool current_link_up) tw32(TG3_CPMU_EEE_CTRL, eeectl); - tg3_phy_cl45_read(tp, MDIO_MMD_AN, - TG3_CL45_D7_EEERES_STAT, &val); - - if (val == TG3_CL45_D7_EEERES_STAT_LP_1000T || - val == TG3_CL45_D7_EEERES_STAT_LP_100TX) + tg3_eee_pull_config(tp, NULL); + if (tp->eee.eee_active) tp->setlpicnt = 2; } @@ -9493,16 +9530,17 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy) if (tg3_flag(tp, INIT_COMPLETE)) tg3_abort_hw(tp, 1); - /* Enable MAC control of LPI */ - if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) - tg3_setup_eee(tp); - if ((tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN) && !(tp->phy_flags & TG3_PHYFLG_USER_CONFIGURED)) { tg3_phy_pull_config(tp); + tg3_eee_pull_config(tp, NULL); tp->phy_flags |= TG3_PHYFLG_USER_CONFIGURED; } + /* Enable MAC control of LPI */ + if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) + tg3_setup_eee(tp); + if (reset_phy) tg3_phy_reset(tp); -- cgit v1.2.1 From 5b6c273ad6c3886f30c7c5df7009e489043c59f3 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Sat, 18 May 2013 06:26:54 +0000 Subject: tg3: Simplify tg3_phy_eee_config_ok() by reusing tg3_eee_pull_config() eee_config_ok() was checking only for mismatch in advertised settings. This patch expands the scope of eee_config_ok() to check for mismatch in the other eee settings. On mismatch we will require a call to tg3_setup_eee() to push the configured settings to the hardware. Reviewed-by: Ben Li Signed-off-by: Michael Chan Signed-off-by: Nithin Nayak Sujir Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) (limited to 'drivers/net/ethernet/broadcom/tg3.c') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 3e7bc3837ef9..2e4974823853 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -4540,26 +4540,23 @@ static int tg3_init_5401phy_dsp(struct tg3 *tp) static bool tg3_phy_eee_config_ok(struct tg3 *tp) { - u32 val; - u32 tgtadv = 0; - u32 advertising = tp->link_config.advertising; + struct ethtool_eee eee; if (!(tp->phy_flags & TG3_PHYFLG_EEE_CAP)) return true; - if (tg3_phy_cl45_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, &val)) - return false; - - val &= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T); - - - if (advertising & ADVERTISED_100baseT_Full) - tgtadv |= MDIO_AN_EEE_ADV_100TX; - if (advertising & ADVERTISED_1000baseT_Full) - tgtadv |= MDIO_AN_EEE_ADV_1000T; + tg3_eee_pull_config(tp, &eee); - if (val != tgtadv) - return false; + if (tp->eee.eee_enabled) { + if (tp->eee.advertised != eee.advertised || + tp->eee.tx_lpi_timer != eee.tx_lpi_timer || + tp->eee.tx_lpi_enabled != eee.tx_lpi_enabled) + return false; + } else { + /* EEE is disabled but we're advertising */ + if (eee.advertised) + return false; + } return true; } @@ -4862,8 +4859,10 @@ static int tg3_setup_copper_phy(struct tg3 *tp, bool force_reset) */ if (!eee_config_ok && (tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN) && - !force_reset) + !force_reset) { + tg3_setup_eee(tp); tg3_phy_reset(tp); + } } else { if (!(bmcr & BMCR_ANENABLE) && tp->link_config.speed == current_speed && -- cgit v1.2.1 From 1cbf9eb85a6601b58f01a71ff10299d2bf5d3365 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Sat, 18 May 2013 06:26:55 +0000 Subject: tg3: Implement set/get_eee handlers Reviewed-by: Ben Li Signed-off-by: Michael Chan Signed-off-by: Nithin Nayak Sujir Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 53 +++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) (limited to 'drivers/net/ethernet/broadcom/tg3.c') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 2e4974823853..fb06aa120293 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -13618,6 +13618,57 @@ static int tg3_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) return 0; } +static int tg3_set_eee(struct net_device *dev, struct ethtool_eee *edata) +{ + struct tg3 *tp = netdev_priv(dev); + + if (!(tp->phy_flags & TG3_PHYFLG_EEE_CAP)) { + netdev_warn(tp->dev, "Board does not support EEE!\n"); + return -EOPNOTSUPP; + } + + if (edata->advertised != tp->eee.advertised) { + netdev_warn(tp->dev, + "Direct manipulation of EEE advertisement is not supported\n"); + return -EINVAL; + } + + if (edata->tx_lpi_timer > TG3_CPMU_DBTMR1_LNKIDLE_MAX) { + netdev_warn(tp->dev, + "Maximal Tx Lpi timer supported is %#x(u)\n", + TG3_CPMU_DBTMR1_LNKIDLE_MAX); + return -EINVAL; + } + + tp->eee = *edata; + + tp->phy_flags |= TG3_PHYFLG_USER_CONFIGURED; + tg3_warn_mgmt_link_flap(tp); + + if (netif_running(tp->dev)) { + tg3_full_lock(tp, 0); + tg3_setup_eee(tp); + tg3_phy_reset(tp); + tg3_full_unlock(tp); + } + + return 0; +} + +static int tg3_get_eee(struct net_device *dev, struct ethtool_eee *edata) +{ + struct tg3 *tp = netdev_priv(dev); + + if (!(tp->phy_flags & TG3_PHYFLG_EEE_CAP)) { + netdev_warn(tp->dev, + "Board does not support EEE!\n"); + return -EOPNOTSUPP; + } + + *edata = tp->eee; + return 0; +} + static const struct ethtool_ops tg3_ethtool_ops = { .get_settings = tg3_get_settings, .set_settings = tg3_set_settings, @@ -13651,6 +13702,8 @@ static const struct ethtool_ops tg3_ethtool_ops = { .get_channels = tg3_get_channels, .set_channels = tg3_set_channels, .get_ts_info = tg3_get_ts_info, + .get_eee = tg3_get_eee, + .set_eee = tg3_set_eee, }; static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *dev, -- cgit v1.2.1 From 8dbb0dc2cb16096efe998c576170e41dc6e8b64f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Peter=20H=C3=BCwe?= Date: Tue, 21 May 2013 12:58:06 +0000 Subject: net/ethernet/broadcom/tg3: Use module_pci_driver to register driver Removing some boilerplate by using module_pci_driver instead of calling register and unregister in the otherwise empty init/exit functions. Signed-off-by: Peter Huewe Acked-by: Nithin Nayak Sujir Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) (limited to 'drivers/net/ethernet/broadcom/tg3.c') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index fb06aa120293..4f0e3fe99e17 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -17804,15 +17804,4 @@ static struct pci_driver tg3_driver = { .driver.pm = &tg3_pm_ops, }; -static int __init tg3_init(void) -{ - return pci_register_driver(&tg3_driver); -} - -static void __exit tg3_cleanup(void) -{ - pci_unregister_driver(&tg3_driver); -} - -module_init(tg3_init); -module_exit(tg3_cleanup); +module_pci_driver(tg3_driver); -- cgit v1.2.1 From 2e460fc07ef0ebadfb593b564a8c7fa6559ac3d7 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Thu, 23 May 2013 11:11:22 +0000 Subject: tg3: Split APE driver state change out of boot reset signature update Unlike the boot signature that needs to be set before every reset, the ape state only needs to be updated to tell the firmware that the driver is now taking/releasing control of the hardware. Move the calls to tg3_ape_driver_state_change() to better, more appropriate places. Also, the firmware does not distinguish between SUSPEND and START states anymore. Remove the SUSPEND case in the switch. Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'drivers/net/ethernet/broadcom/tg3.c') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index c15a92d012ef..ae808b03affe 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -965,9 +965,6 @@ static void tg3_ape_driver_state_change(struct tg3 *tp, int kind) event = APE_EVENT_STATUS_STATE_UNLOAD; break; - case RESET_KIND_SUSPEND: - event = APE_EVENT_STATUS_STATE_SUSPEND; - break; default: return; } @@ -1739,10 +1736,6 @@ static void tg3_write_sig_pre_reset(struct tg3 *tp, int kind) break; } } - - if (kind == RESET_KIND_INIT || - kind == RESET_KIND_SUSPEND) - tg3_ape_driver_state_change(tp, kind); } /* tp->lock is held. */ @@ -1764,9 +1757,6 @@ static void tg3_write_sig_post_reset(struct tg3 *tp, int kind) break; } } - - if (kind == RESET_KIND_SHUTDOWN) - tg3_ape_driver_state_change(tp, kind); } /* tp->lock is held. */ @@ -4206,6 +4196,8 @@ static int tg3_power_down_prepare(struct tg3 *tp) tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN); + tg3_ape_driver_state_change(tp, RESET_KIND_SHUTDOWN); + return 0; } @@ -11244,6 +11236,9 @@ static int tg3_start(struct tg3 *tp, bool reset_phy, bool test_irq, tg3_full_lock(tp, 0); + if (init) + tg3_ape_driver_state_change(tp, RESET_KIND_INIT); + err = tg3_init_hw(tp, reset_phy); if (err) { tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); @@ -13360,11 +13355,13 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, struct tg3 *tp = netdev_priv(dev); bool doextlpbk = etest->flags & ETH_TEST_FL_EXTERNAL_LB; - if ((tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) && - tg3_power_up(tp)) { - etest->flags |= ETH_TEST_FL_FAILED; - memset(data, 1, sizeof(u64) * TG3_NUM_TEST); - return; + if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) { + if (tg3_power_up(tp)) { + etest->flags |= ETH_TEST_FL_FAILED; + memset(data, 1, sizeof(u64) * TG3_NUM_TEST); + return; + } + tg3_ape_driver_state_change(tp, RESET_KIND_INIT); } memset(data, 0, sizeof(u64) * TG3_NUM_TEST); @@ -17670,6 +17667,8 @@ static int tg3_resume(struct device *device) tg3_full_lock(tp, 0); + tg3_ape_driver_state_change(tp, RESET_KIND_INIT); + tg3_flag_set(tp, INIT_COMPLETE); err = tg3_restart_hw(tp, !(tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN)); @@ -17804,6 +17803,7 @@ static void tg3_io_resume(struct pci_dev *pdev) goto done; tg3_full_lock(tp, 0); + tg3_ape_driver_state_change(tp, RESET_KIND_INIT); tg3_flag_set(tp, INIT_COMPLETE); err = tg3_restart_hw(tp, true); if (err) { -- cgit v1.2.1 From 32ba19efc08a4bd63590310f05da5ce4d8773508 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Thu, 23 May 2013 11:11:23 +0000 Subject: tg3: Simplify ring control block setup The current code calls tg3_set_bdinfo() separately on napi0, followed by a loop that does napi1+. Simplify it by setting bdinfo in the loop for all napi contexts. Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 79 +++++++++++++++++++++---------------- 1 file changed, 46 insertions(+), 33 deletions(-) (limited to 'drivers/net/ethernet/broadcom/tg3.c') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index ae808b03affe..bb1d34c109f5 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -9239,6 +9239,48 @@ static void __tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec) } } +/* tp->lock is held. */ +static void tg3_tx_rcbs_init(struct tg3 *tp) +{ + int i = 0; + u32 txrcb = NIC_SRAM_SEND_RCB; + + if (tg3_flag(tp, ENABLE_TSS)) + i++; + + for (; i < tp->irq_max; i++, txrcb += TG3_BDINFO_SIZE) { + struct tg3_napi *tnapi = &tp->napi[i]; + + if (!tnapi->tx_ring) + continue; + + tg3_set_bdinfo(tp, txrcb, tnapi->tx_desc_mapping, + (TG3_TX_RING_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT), + NIC_SRAM_TX_BUFFER_DESC); + } +} + +/* tp->lock is held. */ +static void tg3_rx_ret_rcbs_init(struct tg3 *tp) +{ + int i = 0; + u32 rxrcb = NIC_SRAM_RCV_RET_RCB; + + if (tg3_flag(tp, ENABLE_RSS)) + i++; + + for (; i < tp->irq_max; i++, rxrcb += TG3_BDINFO_SIZE) { + struct tg3_napi *tnapi = &tp->napi[i]; + + if (!tnapi->rx_rcb) + continue; + + tg3_set_bdinfo(tp, rxrcb, tnapi->rx_rcb_mapping, + (tp->rx_ret_ring_mask + 1) << + BDINFO_FLAGS_MAXLEN_SHIFT, 0); + } +} + /* tp->lock is held. */ static void tg3_rings_reset(struct tg3 *tp) { @@ -9315,9 +9357,6 @@ static void tg3_rings_reset(struct tg3 *tp) tw32_tx_mbox(mbox + i * 8, 0); } - txrcb = NIC_SRAM_SEND_RCB; - rxrcb = NIC_SRAM_RCV_RET_RCB; - /* Clear status block in ram. */ memset(tnapi->hw_status, 0, TG3_HW_STATUS_SIZE); @@ -9327,46 +9366,20 @@ static void tg3_rings_reset(struct tg3 *tp) tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW, ((u64) tnapi->status_mapping & 0xffffffff)); - if (tnapi->tx_ring) { - tg3_set_bdinfo(tp, txrcb, tnapi->tx_desc_mapping, - (TG3_TX_RING_SIZE << - BDINFO_FLAGS_MAXLEN_SHIFT), - NIC_SRAM_TX_BUFFER_DESC); - txrcb += TG3_BDINFO_SIZE; - } - - if (tnapi->rx_rcb) { - tg3_set_bdinfo(tp, rxrcb, tnapi->rx_rcb_mapping, - (tp->rx_ret_ring_mask + 1) << - BDINFO_FLAGS_MAXLEN_SHIFT, 0); - rxrcb += TG3_BDINFO_SIZE; - } - stblk = HOSTCC_STATBLCK_RING1; for (i = 1, tnapi++; i < tp->irq_cnt; i++, tnapi++) { u64 mapping = (u64)tnapi->status_mapping; tw32(stblk + TG3_64BIT_REG_HIGH, mapping >> 32); tw32(stblk + TG3_64BIT_REG_LOW, mapping & 0xffffffff); + stblk += 8; /* Clear status block in ram. */ memset(tnapi->hw_status, 0, TG3_HW_STATUS_SIZE); - - if (tnapi->tx_ring) { - tg3_set_bdinfo(tp, txrcb, tnapi->tx_desc_mapping, - (TG3_TX_RING_SIZE << - BDINFO_FLAGS_MAXLEN_SHIFT), - NIC_SRAM_TX_BUFFER_DESC); - txrcb += TG3_BDINFO_SIZE; - } - - tg3_set_bdinfo(tp, rxrcb, tnapi->rx_rcb_mapping, - ((tp->rx_ret_ring_mask + 1) << - BDINFO_FLAGS_MAXLEN_SHIFT), 0); - - stblk += 8; - rxrcb += TG3_BDINFO_SIZE; } + + tg3_tx_rcbs_init(tp); + tg3_rx_ret_rcbs_init(tp); } static void tg3_setup_rxbd_thresholds(struct tg3 *tp) -- cgit v1.2.1 From 328947ff2609989fefe6dfd1143cc0787a5ec862 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Thu, 23 May 2013 11:11:24 +0000 Subject: tg3: Make tg3_rings_reset() more concise Simplify the rings reset function and increase readability by moving the control block disable code into separate functions. Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 81 ++++++++++++++++++++++--------------- 1 file changed, 48 insertions(+), 33 deletions(-) (limited to 'drivers/net/ethernet/broadcom/tg3.c') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index bb1d34c109f5..693c5f23c3ea 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -9239,6 +9239,28 @@ static void __tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec) } } +/* tp->lock is held. */ +static void tg3_tx_rcbs_disable(struct tg3 *tp) +{ + u32 txrcb, limit; + + /* Disable all transmit rings but the first. */ + if (!tg3_flag(tp, 5705_PLUS)) + limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 16; + else if (tg3_flag(tp, 5717_PLUS)) + limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 4; + else if (tg3_flag(tp, 57765_CLASS) || + tg3_asic_rev(tp) == ASIC_REV_5762) + limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 2; + else + limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE; + + for (txrcb = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE; + txrcb < limit; txrcb += TG3_BDINFO_SIZE) + tg3_write_mem(tp, txrcb + TG3_BDINFO_MAXLEN_FLAGS, + BDINFO_FLAGS_DISABLED); +} + /* tp->lock is held. */ static void tg3_tx_rcbs_init(struct tg3 *tp) { @@ -9260,6 +9282,29 @@ static void tg3_tx_rcbs_init(struct tg3 *tp) } } +/* tp->lock is held. */ +static void tg3_rx_ret_rcbs_disable(struct tg3 *tp) +{ + u32 rxrcb, limit; + + /* Disable all receive return rings but the first. */ + if (tg3_flag(tp, 5717_PLUS)) + limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 17; + else if (!tg3_flag(tp, 5705_PLUS)) + limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 16; + else if (tg3_asic_rev(tp) == ASIC_REV_5755 || + tg3_asic_rev(tp) == ASIC_REV_5762 || + tg3_flag(tp, 57765_CLASS)) + limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 4; + else + limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE; + + for (rxrcb = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE; + rxrcb < limit; rxrcb += TG3_BDINFO_SIZE) + tg3_write_mem(tp, rxrcb + TG3_BDINFO_MAXLEN_FLAGS, + BDINFO_FLAGS_DISABLED); +} + /* tp->lock is held. */ static void tg3_rx_ret_rcbs_init(struct tg3 *tp) { @@ -9285,42 +9330,12 @@ static void tg3_rx_ret_rcbs_init(struct tg3 *tp) static void tg3_rings_reset(struct tg3 *tp) { int i; - u32 stblk, txrcb, rxrcb, limit; + u32 stblk; struct tg3_napi *tnapi = &tp->napi[0]; - /* Disable all transmit rings but the first. */ - if (!tg3_flag(tp, 5705_PLUS)) - limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 16; - else if (tg3_flag(tp, 5717_PLUS)) - limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 4; - else if (tg3_flag(tp, 57765_CLASS) || - tg3_asic_rev(tp) == ASIC_REV_5762) - limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 2; - else - limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE; - - for (txrcb = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE; - txrcb < limit; txrcb += TG3_BDINFO_SIZE) - tg3_write_mem(tp, txrcb + TG3_BDINFO_MAXLEN_FLAGS, - BDINFO_FLAGS_DISABLED); - - - /* Disable all receive return rings but the first. */ - if (tg3_flag(tp, 5717_PLUS)) - limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 17; - else if (!tg3_flag(tp, 5705_PLUS)) - limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 16; - else if (tg3_asic_rev(tp) == ASIC_REV_5755 || - tg3_asic_rev(tp) == ASIC_REV_5762 || - tg3_flag(tp, 57765_CLASS)) - limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 4; - else - limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE; + tg3_tx_rcbs_disable(tp); - for (rxrcb = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE; - rxrcb < limit; rxrcb += TG3_BDINFO_SIZE) - tg3_write_mem(tp, rxrcb + TG3_BDINFO_MAXLEN_FLAGS, - BDINFO_FLAGS_DISABLED); + tg3_rx_ret_rcbs_disable(tp); /* Disable interrupts */ tw32_mailbox_f(tp->napi[0].int_mbox, 1); -- cgit v1.2.1 From 4a5f46f2fef13ecfc1f396d0caf75031a7a15422 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Thu, 23 May 2013 11:11:25 +0000 Subject: tg3: Use descriptive label names in tg3_start Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/net/ethernet/broadcom/tg3.c') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 693c5f23c3ea..6ab02d6a0eb3 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -11244,7 +11244,7 @@ static int tg3_start(struct tg3 *tp, bool reset_phy, bool test_irq, */ err = tg3_alloc_consistent(tp); if (err) - goto err_out1; + goto out_ints_fini; tg3_napi_init(tp); @@ -11258,7 +11258,7 @@ static int tg3_start(struct tg3 *tp, bool reset_phy, bool test_irq, tnapi = &tp->napi[i]; free_irq(tnapi->irq_vec, tnapi); } - goto err_out2; + goto out_napi_fini; } } @@ -11276,7 +11276,7 @@ static int tg3_start(struct tg3 *tp, bool reset_phy, bool test_irq, tg3_full_unlock(tp); if (err) - goto err_out3; + goto out_free_irq; if (test_irq && tg3_flag(tp, USING_MSI)) { err = tg3_test_msi(tp); @@ -11287,7 +11287,7 @@ static int tg3_start(struct tg3 *tp, bool reset_phy, bool test_irq, tg3_free_rings(tp); tg3_full_unlock(tp); - goto err_out2; + goto out_napi_fini; } if (!tg3_flag(tp, 57765_PLUS) && tg3_flag(tp, USING_MSI)) { @@ -11327,18 +11327,18 @@ static int tg3_start(struct tg3 *tp, bool reset_phy, bool test_irq, return 0; -err_out3: +out_free_irq: for (i = tp->irq_cnt - 1; i >= 0; i--) { struct tg3_napi *tnapi = &tp->napi[i]; free_irq(tnapi->irq_vec, tnapi); } -err_out2: +out_napi_fini: tg3_napi_disable(tp); tg3_napi_fini(tp); tg3_free_consistent(tp); -err_out1: +out_ints_fini: tg3_ints_fini(tp); return err; -- cgit v1.2.1 From 7c10ee32f32644c9efbb3cfebf5fb7cea4b48a2c Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Thu, 23 May 2013 11:11:26 +0000 Subject: tg3: Fix misplaced empty line Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet/broadcom/tg3.c') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 6ab02d6a0eb3..bd5917d8ffb5 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -1311,8 +1311,8 @@ static int tg3_phy_toggle_auxctl_smdsp(struct tg3 *tp, bool enable) if (err) return err; - if (enable) + if (enable) val |= MII_TG3_AUXCTL_ACTL_SMDSP_ENA; else val &= ~MII_TG3_AUXCTL_ACTL_SMDSP_ENA; -- cgit v1.2.1 From f2068b80ca59d63ca21ee1da829c9fe09f25b08e Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Thu, 23 May 2013 11:11:27 +0000 Subject: tg3: Remove unnecessary lock around tg3_flag_set The spinlock was needed when flags used to be a u32 and set/cleared using bit operations. Now that we use the atomic set_bit, this lock isn't needed. Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/net/ethernet/broadcom/tg3.c') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index bd5917d8ffb5..d7755d849e53 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -6386,9 +6386,7 @@ static void tg3_tx_recover(struct tg3 *tp) "Please report the problem to the driver maintainer " "and include system chipset information.\n"); - spin_lock(&tp->lock); tg3_flag_set(tp, TX_RECOVERY_PENDING); - spin_unlock(&tp->lock); } static inline u32 tg3_tx_avail(struct tg3_napi *tnapi) -- cgit v1.2.1 From 5865fc1b6a99bc7dcf245770c2735577b8596b6e Mon Sep 17 00:00:00 2001 From: Yijing Wang Date: Sun, 2 Jun 2013 21:36:21 +0000 Subject: tg3: remove redundant pm init code Pci_enable_device() will set device pm state to D0, so it's no need to do it again in tg3_init_one(). Acked-by: Michael Chan Signed-off-by: Yijing Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 24 +++--------------------- 1 file changed, 3 insertions(+), 21 deletions(-) (limited to 'drivers/net/ethernet/broadcom/tg3.c') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index d7755d849e53..3cfae0e49207 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -17195,7 +17195,7 @@ static int tg3_init_one(struct pci_dev *pdev, { struct net_device *dev; struct tg3 *tp; - int i, err, pm_cap; + int i, err; u32 sndmbx, rcvmbx, intmbx; char str[40]; u64 dma_mask, persist_dma_mask; @@ -17217,25 +17217,10 @@ static int tg3_init_one(struct pci_dev *pdev, pci_set_master(pdev); - /* Find power-management capability. */ - pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); - if (pm_cap == 0) { - dev_err(&pdev->dev, - "Cannot find Power Management capability, aborting\n"); - err = -EIO; - goto err_out_free_res; - } - - err = pci_set_power_state(pdev, PCI_D0); - if (err) { - dev_err(&pdev->dev, "Transition to D0 failed, aborting\n"); - goto err_out_free_res; - } - dev = alloc_etherdev_mq(sizeof(*tp), TG3_IRQ_MAX_VECS); if (!dev) { err = -ENOMEM; - goto err_out_power_down; + goto err_out_free_res; } SET_NETDEV_DEV(dev, &pdev->dev); @@ -17243,7 +17228,7 @@ static int tg3_init_one(struct pci_dev *pdev, tp = netdev_priv(dev); tp->pdev = pdev; tp->dev = dev; - tp->pm_cap = pm_cap; + tp->pm_cap = pdev->pm_cap; tp->rx_mode = TG3_DEF_RX_MODE; tp->tx_mode = TG3_DEF_TX_MODE; tp->irq_sync = 1; @@ -17581,9 +17566,6 @@ err_out_iounmap: err_out_free_dev: free_netdev(dev); -err_out_power_down: - pci_set_power_state(pdev, PCI_D3hot); - err_out_free_res: pci_release_regions(pdev); -- cgit v1.2.1 From 72bb72b0d98847d22c6fae4e170121f3640f0f60 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 17 Jun 2013 13:47:25 -0700 Subject: tg3: Prevent system hang during repeated EEH errors. The current tg3 code assumes the pci_error_handlers to be always called in sequence. In particular, during ->error_detected(), NAPI is disabled and the device is shutdown. The device is later reset and NAPI re-enabled in ->slot_reset() and ->resume(). In EEH, if more than 6 errors are detected in a hour, only ->error_detected() will be called. This will leave the driver in an inconsistent state as NAPI is disabled but netif_running state is still true. When the device is later closed, we'll try to disable NAPI again and it will loop forever. We fix this by closing the device if we encounter any error conditions during the normal sequence of the pci_error_handlers. v2: Remove the changes in tg3_io_resume() based on Benjamin Poirier's feedback. Signed-off-by: Michael Chan Signed-off-by: Nithin Nayak Sujir Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet/broadcom/tg3.c') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 28a645fc68bf..297fc138fa15 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -17747,10 +17747,13 @@ static pci_ers_result_t tg3_io_error_detected(struct pci_dev *pdev, tg3_full_unlock(tp); done: - if (state == pci_channel_io_perm_failure) + if (state == pci_channel_io_perm_failure) { + tg3_napi_enable(tp); + dev_close(netdev); err = PCI_ERS_RESULT_DISCONNECT; - else + } else { pci_disable_device(pdev); + } rtnl_unlock(); @@ -17796,6 +17799,10 @@ static pci_ers_result_t tg3_io_slot_reset(struct pci_dev *pdev) rc = PCI_ERS_RESULT_RECOVERED; done: + if (rc != PCI_ERS_RESULT_RECOVERED && netif_running(netdev)) { + tg3_napi_enable(tp); + dev_close(netdev); + } rtnl_unlock(); return rc; -- cgit v1.2.1