From d3dbfee0d5ee4690824cbc5685bc9fe47a12bb8b Mon Sep 17 00:00:00 2001 From: Vladislav Zolotarov Date: Mon, 19 Apr 2010 01:14:49 +0000 Subject: bnx2x: Rework power state handling code Move "don't shut down the power" logic into bnx2x_set_power_state() to make the code cleaner. Signed-off-by: Vladislav Zolotarov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/net/bnx2x_main.c') diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index d7c00748e270..c4bc006f5104 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -11935,6 +11935,14 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state) break; case PCI_D3hot: + /* If there are other clients above don't + shut down the power */ + if (atomic_read(&bp->pdev->enable_cnt) != 1) + return 0; + /* Don't shut down the power for emulation and FPGA */ + if (CHIP_REV_IS_SLOW(bp)) + return 0; + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; pmcsr |= 3; @@ -12551,9 +12559,7 @@ static int bnx2x_close(struct net_device *dev) /* Unload the driver, release IRQs */ bnx2x_nic_unload(bp, UNLOAD_CLOSE); - if (atomic_read(&bp->pdev->enable_cnt) == 1) - if (!CHIP_REV_IS_SLOW(bp)) - bnx2x_set_power_state(bp, PCI_D3hot); + bnx2x_set_power_state(bp, PCI_D3hot); return 0; } -- cgit v1.2.1