From 1e0063645ef1e89c63778fbb0417e79b7dc65b5f Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Sun, 29 Apr 2007 21:42:10 -0500 Subject: atl1: use dev_printk macros Use dev_printk macros for PCI related errors, warnings, debug and info console messages. Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik --- drivers/net/atl1/atl1_ethtool.c | 19 ++++------ drivers/net/atl1/atl1_hw.c | 22 +++++------ drivers/net/atl1/atl1_main.c | 83 ++++++++++++++++++----------------------- drivers/net/atl1/atl1_param.c | 31 +++++++-------- 4 files changed, 68 insertions(+), 87 deletions(-) (limited to 'drivers/net/atl1') diff --git a/drivers/net/atl1/atl1_ethtool.c b/drivers/net/atl1/atl1_ethtool.c index c11c27798e5c..1f616c5c1473 100644 --- a/drivers/net/atl1/atl1_ethtool.c +++ b/drivers/net/atl1/atl1_ethtool.c @@ -156,8 +156,7 @@ static int atl1_set_settings(struct net_device *netdev, u16 old_media_type = hw->media_type; if (netif_running(adapter->netdev)) { - printk(KERN_DEBUG "%s: ethtool shutting down adapter\n", - atl1_driver_name); + dev_dbg(&adapter->pdev->dev, "ethtool shutting down adapter\n"); atl1_down(adapter); } @@ -166,9 +165,8 @@ static int atl1_set_settings(struct net_device *netdev, else { if (ecmd->speed == SPEED_1000) { if (ecmd->duplex != DUPLEX_FULL) { - printk(KERN_WARNING - "%s: can't force to 1000M half duplex\n", - atl1_driver_name); + dev_warn(&adapter->pdev->dev, + "can't force to 1000M half duplex\n"); ret_val = -EINVAL; goto exit_sset; } @@ -206,9 +204,8 @@ static int atl1_set_settings(struct net_device *netdev, } if (atl1_phy_setup_autoneg_adv(hw)) { ret_val = -EINVAL; - printk(KERN_WARNING - "%s: invalid ethtool speed/duplex setting\n", - atl1_driver_name); + dev_warn(&adapter->pdev->dev, + "invalid ethtool speed/duplex setting\n"); goto exit_sset; } if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || @@ -239,12 +236,10 @@ exit_sset: hw->media_type = old_media_type; if (netif_running(adapter->netdev)) { - printk(KERN_DEBUG "%s: ethtool starting adapter\n", - atl1_driver_name); + dev_dbg(&adapter->pdev->dev, "ethtool starting adapter\n"); atl1_up(adapter); } else if (!ret_val) { - printk(KERN_DEBUG "%s: ethtool resetting adapter\n", - atl1_driver_name); + dev_dbg(&adapter->pdev->dev, "ethtool resetting adapter\n"); atl1_reset(adapter); } return ret_val; diff --git a/drivers/net/atl1/atl1_hw.c b/drivers/net/atl1/atl1_hw.c index 69482e0d849b..5b9dd3c1e84b 100644 --- a/drivers/net/atl1/atl1_hw.c +++ b/drivers/net/atl1/atl1_hw.c @@ -38,6 +38,7 @@ */ s32 atl1_reset_hw(struct atl1_hw *hw) { + struct pci_dev *pdev = hw->back->pdev; u32 icr; int i; @@ -74,7 +75,7 @@ s32 atl1_reset_hw(struct atl1_hw *hw) } if (icr) { - printk (KERN_DEBUG "icr = %x\n", icr); + dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); return icr; } @@ -437,6 +438,7 @@ s32 atl1_phy_enter_power_saving(struct atl1_hw *hw) */ static s32 atl1_phy_reset(struct atl1_hw *hw) { + struct pci_dev *pdev = hw->back->pdev; s32 ret_val; u16 phy_data; @@ -468,8 +470,7 @@ static s32 atl1_phy_reset(struct atl1_hw *hw) u32 val; int i; /* pcie serdes link may be down! */ - printk(KERN_DEBUG "%s: autoneg caused pcie phy link down\n", - atl1_driver_name); + dev_dbg(&pdev->dev, "pcie phy link down\n"); for (i = 0; i < 25; i++) { msleep(1); @@ -479,9 +480,7 @@ static s32 atl1_phy_reset(struct atl1_hw *hw) } if ((val & (MDIO_START | MDIO_BUSY)) != 0) { - printk(KERN_WARNING - "%s: pcie link down at least for 25ms\n", - atl1_driver_name); + dev_warn(&pdev->dev, "pcie link down at least 25ms\n"); return ret_val; } } @@ -571,6 +570,7 @@ s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw) */ static s32 atl1_setup_link(struct atl1_hw *hw) { + struct pci_dev *pdev = hw->back->pdev; s32 ret_val; /* @@ -581,15 +581,13 @@ static s32 atl1_setup_link(struct atl1_hw *hw) */ ret_val = atl1_phy_setup_autoneg_adv(hw); if (ret_val) { - printk(KERN_DEBUG "%s: error setting up autonegotiation\n", - atl1_driver_name); + dev_dbg(&pdev->dev, "error setting up autonegotiation\n"); return ret_val; } /* SW.Reset , En-Auto-Neg if needed */ ret_val = atl1_phy_reset(hw); if (ret_val) { - printk(KERN_DEBUG "%s: error resetting the phy\n", - atl1_driver_name); + dev_dbg(&pdev->dev, "error resetting phy\n"); return ret_val; } hw->phy_configured = true; @@ -669,6 +667,7 @@ s32 atl1_init_hw(struct atl1_hw *hw) */ s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) { + struct pci_dev *pdev = hw->back->pdev; s32 ret_val; u16 phy_data; @@ -691,8 +690,7 @@ s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) *speed = SPEED_10; break; default: - printk(KERN_DEBUG "%s: error getting speed\n", - atl1_driver_name); + dev_dbg(&pdev->dev, "error getting speed\n"); return ATL1_ERR_PHY_SPEED; break; } diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c index 4b1d4d153ecf..d28f88bbdd5f 100644 --- a/drivers/net/atl1/atl1_main.c +++ b/drivers/net/atl1/atl1_main.c @@ -188,8 +188,7 @@ s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count); tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); if (unlikely(!tpd_ring->buffer_info)) { - printk(KERN_WARNING "%s: kzalloc failed , size = D%d\n", - atl1_driver_name, size); + dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", size); goto err_nomem; } rfd_ring->buffer_info = @@ -207,9 +206,7 @@ s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, &ring_header->dma); if (unlikely(!ring_header->desc)) { - printk(KERN_WARNING - "%s: pci_alloc_consistent failed, size = D%d\n", - atl1_driver_name, size); + dev_err(&pdev->dev, "pci_alloc_consistent failed\n"); goto err_nomem; } @@ -373,8 +370,7 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter, if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC | ERR_FLAG_CODE | ERR_FLAG_OV)) { adapter->hw_csum_err++; - printk(KERN_DEBUG "%s: rx checksum error\n", - atl1_driver_name); + dev_dbg(&adapter->pdev->dev, "rx checksum error\n"); return; } } @@ -393,8 +389,9 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter, } /* IPv4, but hardware thinks its checksum is wrong */ - printk(KERN_DEBUG "%s: hw csum wrong pkt_flag:%x, err_flag:%x\n", - atl1_driver_name, rrd->pkt_flg, rrd->err_flg); + dev_dbg(&adapter->pdev->dev, + "hw csum wrong, pkt_flag:%x, err_flag:%x\n", + rrd->pkt_flg, rrd->err_flg); skb->ip_summed = CHECKSUM_COMPLETE; skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum); adapter->hw_csum_err++; @@ -507,14 +504,13 @@ chk_rrd: /* rrd seems to be bad */ if (unlikely(i-- > 0)) { /* rrd may not be DMAed completely */ - printk(KERN_DEBUG - "%s: RRD may not be DMAed completely\n", - atl1_driver_name); + dev_dbg(&adapter->pdev->dev, + "incomplete RRD DMA transfer\n"); udelay(1); goto chk_rrd; } /* bad rrd */ - printk(KERN_DEBUG "%s: bad RRD\n", atl1_driver_name); + dev_dbg(&adapter->pdev->dev, "bad RRD\n"); /* see if update RFD index */ if (rrd->num_buf > 1) { u16 num_buf; @@ -685,8 +681,8 @@ static void atl1_check_for_link(struct atl1_adapter *adapter) /* notify upper layer link down ASAP */ if (!(phy_data & BMSR_LSTATUS)) { /* Link Down */ if (netif_carrier_ok(netdev)) { /* old link state: Up */ - printk(KERN_INFO "%s: %s link is down\n", - atl1_driver_name, netdev->name); + dev_info(&adapter->pdev->dev, "%s link is down\n", + netdev->name); adapter->link_speed = SPEED_0; netif_carrier_off(netdev); netif_stop_queue(netdev); @@ -731,8 +727,8 @@ static irqreturn_t atl1_intr(int irq, void *data) /* check if PCIE PHY Link down */ if (status & ISR_PHY_LINKDOWN) { - printk(KERN_DEBUG "%s: pcie phy link down %x\n", - atl1_driver_name, status); + dev_dbg(&adapter->pdev->dev, "pcie phy link down %x\n", + status); if (netif_running(adapter->netdev)) { /* reset MAC */ iowrite32(0, adapter->hw.hw_addr + REG_IMR); schedule_work(&adapter->pcie_dma_to_rst_task); @@ -742,9 +738,9 @@ static irqreturn_t atl1_intr(int irq, void *data) /* check if DMA read/write error ? */ if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) { - printk(KERN_DEBUG - "%s: pcie DMA r/w error (status = 0x%x)\n", - atl1_driver_name, status); + dev_dbg(&adapter->pdev->dev, + "pcie DMA r/w error (status = 0x%x)\n", + status); iowrite32(0, adapter->hw.hw_addr + REG_IMR); schedule_work(&adapter->pcie_dma_to_rst_task); return IRQ_HANDLED; @@ -762,14 +758,13 @@ static irqreturn_t atl1_intr(int irq, void *data) /* rx exception */ if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN | + ISR_RRD_OV | ISR_HOST_RFD_UNRUN | + ISR_HOST_RRD_OV | ISR_CMB_RX))) { + if (status & (ISR_RXF_OV | ISR_RFD_UNRUN | ISR_RRD_OV | ISR_HOST_RFD_UNRUN | - ISR_HOST_RRD_OV | ISR_CMB_RX))) { - if (status & - (ISR_RXF_OV | ISR_RFD_UNRUN | ISR_RRD_OV | - ISR_HOST_RFD_UNRUN | ISR_HOST_RRD_OV)) - printk(KERN_INFO - "%s: rx exception: status = 0x%x\n", - atl1_driver_name, status); + ISR_HOST_RRD_OV)) + dev_dbg(&adapter->pdev->dev, + "rx exception, ISR = 0x%x\n", status); atl1_intr_rx(adapter); } @@ -874,8 +869,7 @@ static u32 atl1_check_link(struct atl1_adapter *adapter) atl1_read_phy_reg(hw, MII_BMSR, &phy_data); if (!(phy_data & BMSR_LSTATUS)) { /* link down */ if (netif_carrier_ok(netdev)) { /* old link state: Up */ - printk(KERN_INFO "%s: link is down\n", - atl1_driver_name); + dev_info(&adapter->pdev->dev, "link is down\n"); adapter->link_speed = SPEED_0; netif_carrier_off(netdev); netif_stop_queue(netdev); @@ -918,11 +912,11 @@ static u32 atl1_check_link(struct atl1_adapter *adapter) adapter->link_speed = speed; adapter->link_duplex = duplex; atl1_setup_mac_ctrl(adapter); - printk(KERN_INFO "%s: %s link is up %d Mbps %s\n", - atl1_driver_name, netdev->name, - adapter->link_speed, - adapter->link_duplex == - FULL_DUPLEX ? "full duplex" : "half duplex"); + dev_info(&adapter->pdev->dev, + "%s link is up %d Mbps %s\n", + netdev->name, adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? + "full duplex" : "half duplex"); } if (!netif_carrier_ok(netdev)) { /* Link down -> Up */ netif_carrier_on(netdev); @@ -1330,8 +1324,8 @@ static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb, cso = skb_transport_offset(skb); css = cso + skb->csum_offset; if (unlikely(cso & 0x1)) { - printk(KERN_DEBUG "%s: payload offset != even number\n", - atl1_driver_name); + dev_dbg(&adapter->pdev->dev, + "payload offset not an even number\n"); return -1; } csum->csumpl |= (cso & CSUM_PARAM_PLOADOFFSET_MASK) << @@ -1579,7 +1573,7 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if (!spin_trylock(&adapter->lock)) { /* Can't get lock - tell upper layer to requeue */ local_irq_restore(flags); - printk(KERN_DEBUG "%s: TX locked\n", atl1_driver_name); + dev_dbg(&adapter->pdev->dev, "tx locked\n"); return NETDEV_TX_LOCKED; } @@ -1587,7 +1581,7 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) /* not enough descriptors */ netif_stop_queue(netdev); spin_unlock_irqrestore(&adapter->lock, flags); - printk(KERN_DEBUG "%s: TX busy\n", atl1_driver_name); + dev_dbg(&adapter->pdev->dev, "tx busy\n"); return NETDEV_TX_BUSY; } @@ -1841,8 +1835,7 @@ static int atl1_change_mtu(struct net_device *netdev, int new_mtu) if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { - printk(KERN_WARNING "%s: invalid MTU setting\n", - atl1_driver_name); + dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); return -EINVAL; } @@ -2136,9 +2129,7 @@ static int __devinit atl1_probe(struct pci_dev *pdev, if (err) { err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (err) { - printk(KERN_DEBUG - "%s: no usable DMA configuration, aborting\n", - atl1_driver_name); + dev_err(&pdev->dev, "no usable DMA configuration\n"); goto err_dma; } pci_using_64 = false; @@ -2175,7 +2166,9 @@ static int __devinit atl1_probe(struct pci_dev *pdev, goto err_pci_iomap; } /* get device revision number */ - adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr + (REG_MASTER_CTRL + 2)); + adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr + + (REG_MASTER_CTRL + 2)); + dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION); /* set default ring resource counts */ adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD; @@ -2466,8 +2459,6 @@ static void __exit atl1_exit_module(void) */ static int __init atl1_init_module(void) { - printk(KERN_INFO "%s - version %s\n", atl1_driver_string, DRIVER_VERSION); - printk(KERN_INFO "%s\n", atl1_copyright); return pci_register_driver(&atl1_driver); } diff --git a/drivers/net/atl1/atl1_param.c b/drivers/net/atl1/atl1_param.c index bcd0bd891722..324f9f0ece99 100644 --- a/drivers/net/atl1/atl1_param.c +++ b/drivers/net/atl1/atl1_param.c @@ -93,7 +93,7 @@ struct atl1_option { } arg; }; -static int __devinit atl1_validate_option(int *value, struct atl1_option *opt) +static int __devinit atl1_validate_option(int *value, struct atl1_option *opt, struct pci_dev *pdev) { if (*value == OPTION_UNSET) { *value = opt->def; @@ -104,19 +104,17 @@ static int __devinit atl1_validate_option(int *value, struct atl1_option *opt) case enable_option: switch (*value) { case OPTION_ENABLED: - printk(KERN_INFO "%s: %s Enabled\n", atl1_driver_name, - opt->name); + dev_info(&pdev->dev, "%s enabled\n", opt->name); return 0; case OPTION_DISABLED: - printk(KERN_INFO "%s: %s Disabled\n", atl1_driver_name, - opt->name); + dev_info(&pdev->dev, "%s disabled\n", opt->name); return 0; } break; case range_option: if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { - printk(KERN_INFO "%s: %s set to %i\n", - atl1_driver_name, opt->name, *value); + dev_info(&pdev->dev, "%s set to %i\n", opt->name, + *value); return 0; } break; @@ -128,8 +126,8 @@ static int __devinit atl1_validate_option(int *value, struct atl1_option *opt) ent = &opt->arg.l.p[i]; if (*value == ent->i) { if (ent->str[0] != '\0') - printk(KERN_INFO "%s: %s\n", - atl1_driver_name, ent->str); + dev_info(&pdev->dev, "%s\n", + ent->str); return 0; } } @@ -140,8 +138,8 @@ static int __devinit atl1_validate_option(int *value, struct atl1_option *opt) break; } - printk(KERN_INFO "%s: invalid %s specified (%i) %s\n", - atl1_driver_name, opt->name, *value, opt->err); + dev_info(&pdev->dev, "invalid %s specified (%i) %s\n", + opt->name, *value, opt->err); *value = opt->def; return -1; } @@ -157,12 +155,11 @@ static int __devinit atl1_validate_option(int *value, struct atl1_option *opt) */ void __devinit atl1_check_options(struct atl1_adapter *adapter) { + struct pci_dev *pdev = adapter->pdev; int bd = adapter->bd_number; if (bd >= ATL1_MAX_NIC) { - printk(KERN_NOTICE "%s: warning: no configuration for board #%i\n", - atl1_driver_name, bd); - printk(KERN_NOTICE "%s: using defaults for all values\n", - atl1_driver_name); + dev_notice(&pdev->dev, "no configuration for board#%i\n", bd); + dev_notice(&pdev->dev, "using defaults for all values\n"); } { /* Interrupt Moderate Timer */ struct atl1_option opt = { @@ -177,7 +174,7 @@ void __devinit atl1_check_options(struct atl1_adapter *adapter) int val; if (num_int_mod_timer > bd) { val = int_mod_timer[bd]; - atl1_validate_option(&val, &opt); + atl1_validate_option(&val, &opt, pdev); adapter->imt = (u16) val; } else adapter->imt = (u16) (opt.def); @@ -197,7 +194,7 @@ void __devinit atl1_check_options(struct atl1_adapter *adapter) int val; if (num_flash_vendor > bd) { val = flash_vendor[bd]; - atl1_validate_option(&val, &opt); + atl1_validate_option(&val, &opt, pdev); adapter->hw.flash_vendor = (u8) val; } else adapter->hw.flash_vendor = (u8) (opt.def); -- cgit v1.2.1