From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/net/at1700.c | 939 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 939 insertions(+) create mode 100644 drivers/net/at1700.c (limited to 'drivers/net/at1700.c') diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c new file mode 100644 index 000000000000..b8ab2b6355eb --- /dev/null +++ b/drivers/net/at1700.c @@ -0,0 +1,939 @@ +/* at1700.c: A network device driver for the Allied Telesis AT1700. + + Written 1993-98 by Donald Becker. + + Copyright 1993 United States Government as represented by the + Director, National Security Agency. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + The author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + + This is a device driver for the Allied Telesis AT1700, and + Fujitsu FMV-181/182/181A/182A/183/184/183A/184A, which are + straight-forward Fujitsu MB86965 implementations. + + Modification for Fujitsu FMV-18X cards is done by Yutaka Tamiya + (tamy@flab.fujitsu.co.jp). + + Sources: + The Fujitsu MB86965 datasheet. + + After the initial version of this driver was written Gerry Sawkins of + ATI provided their EEPROM configuration code header file. + Thanks to NIIBE Yutaka for bug fixes. + + MCA bus (AT1720) support by Rene Schmit + + Bugs: + The MB86965 has a design flaw that makes all probes unreliable. Not + only is it difficult to detect, it also moves around in I/O space in + response to inb()s from other device probes! +*/ +/* + 99/03/03 Allied Telesis RE1000 Plus support by T.Hagawa + 99/12/30 port to 2.3.35 by K.Takai +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static char version[] __initdata = + "at1700.c:v1.15 4/7/98 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; + +#define DRV_NAME "at1700" + +/* Tunable parameters. */ + +/* When to switch from the 64-entry multicast filter to Rx-all-multicast. */ +#define MC_FILTERBREAK 64 + +/* These unusual address orders are used to verify the CONFIG register. */ + +static int fmv18x_probe_list[] __initdata = { + 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x300, 0x340, 0 +}; + +/* + * ISA + */ + +static unsigned at1700_probe_list[] __initdata = { + 0x260, 0x280, 0x2a0, 0x240, 0x340, 0x320, 0x380, 0x300, 0 +}; + +/* + * MCA + */ +#ifdef CONFIG_MCA_LEGACY +static int at1700_ioaddr_pattern[] __initdata = { + 0x00, 0x04, 0x01, 0x05, 0x02, 0x06, 0x03, 0x07 +}; + +static int at1700_mca_probe_list[] __initdata = { + 0x400, 0x1400, 0x2400, 0x3400, 0x4400, 0x5400, 0x6400, 0x7400, 0 +}; + +static int at1700_irq_pattern[] __initdata = { + 0x00, 0x00, 0x00, 0x30, 0x70, 0xb0, 0x00, 0x00, + 0x00, 0xf0, 0x34, 0x74, 0xb4, 0x00, 0x00, 0xf4, 0x00 +}; +#endif + +/* use 0 for production, 1 for verification, >2 for debug */ +#ifndef NET_DEBUG +#define NET_DEBUG 1 +#endif +static unsigned int net_debug = NET_DEBUG; + +typedef unsigned char uchar; + +/* Information that need to be kept for each board. */ +struct net_local { + struct net_device_stats stats; + spinlock_t lock; + unsigned char mc_filter[8]; + uint jumpered:1; /* Set iff the board has jumper config. */ + uint tx_started:1; /* Packets are on the Tx queue. */ + uint tx_queue_ready:1; /* Tx queue is ready to be sent. */ + uint rx_started:1; /* Packets are Rxing. */ + uchar tx_queue; /* Number of packet on the Tx queue. */ + char mca_slot; /* -1 means ISA */ + ushort tx_queue_len; /* Current length of the Tx queue. */ +}; + + +/* Offsets from the base address. */ +#define STATUS 0 +#define TX_STATUS 0 +#define RX_STATUS 1 +#define TX_INTR 2 /* Bit-mapped interrupt enable registers. */ +#define RX_INTR 3 +#define TX_MODE 4 +#define RX_MODE 5 +#define CONFIG_0 6 /* Misc. configuration settings. */ +#define CONFIG_1 7 +/* Run-time register bank 2 definitions. */ +#define DATAPORT 8 /* Word-wide DMA or programmed-I/O dataport. */ +#define TX_START 10 +#define COL16CNTL 11 /* Controll Reg for 16 collisions */ +#define MODE13 13 +#define RX_CTRL 14 +/* Configuration registers only on the '865A/B chips. */ +#define EEPROM_Ctrl 16 +#define EEPROM_Data 17 +#define CARDSTATUS 16 /* FMV-18x Card Status */ +#define CARDSTATUS1 17 /* FMV-18x Card Status */ +#define IOCONFIG 18 /* Either read the jumper, or move the I/O. */ +#define IOCONFIG1 19 +#define SAPROM 20 /* The station address PROM, if no EEPROM. */ +#define MODE24 24 +#define RESET 31 /* Write to reset some parts of the chip. */ +#define AT1700_IO_EXTENT 32 +#define PORT_OFFSET(o) (o) + + +#define TX_TIMEOUT 10 + + +/* Index to functions, as function prototypes. */ + +static int at1700_probe1(struct net_device *dev, int ioaddr); +static int read_eeprom(long ioaddr, int location); +static int net_open(struct net_device *dev); +static int net_send_packet(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs *regs); +static void net_rx(struct net_device *dev); +static int net_close(struct net_device *dev); +static struct net_device_stats *net_get_stats(struct net_device *dev); +static void set_rx_mode(struct net_device *dev); +static void net_tx_timeout (struct net_device *dev); + + +#ifdef CONFIG_MCA_LEGACY +struct at1720_mca_adapters_struct { + char* name; + int id; +}; +/* rEnE : maybe there are others I don't know off... */ + +static struct at1720_mca_adapters_struct at1720_mca_adapters[] __initdata = { + { "Allied Telesys AT1720AT", 0x6410 }, + { "Allied Telesys AT1720BT", 0x6413 }, + { "Allied Telesys AT1720T", 0x6416 }, + { NULL, 0 }, +}; +#endif + +/* Check for a network adaptor of this type, and return '0' iff one exists. + If dev->base_addr == 0, probe all likely locations. + If dev->base_addr == 1, always return failure. + If dev->base_addr == 2, allocate space for the device and return success + (detachable devices only). + */ + +static int io = 0x260; + +static int irq; + +static void cleanup_card(struct net_device *dev) +{ +#ifdef CONFIG_MCA_LEGACY + struct net_local *lp = netdev_priv(dev); + if (lp->mca_slot >= 0) + mca_mark_as_unused(lp->mca_slot); +#endif + free_irq(dev->irq, NULL); + release_region(dev->base_addr, AT1700_IO_EXTENT); +} + +struct net_device * __init at1700_probe(int unit) +{ + struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); + unsigned *port; + int err = 0; + + if (!dev) + return ERR_PTR(-ENODEV); + + if (unit >= 0) { + sprintf(dev->name, "eth%d", unit); + netdev_boot_setup_check(dev); + io = dev->base_addr; + irq = dev->irq; + } else { + dev->base_addr = io; + dev->irq = irq; + } + + SET_MODULE_OWNER(dev); + + if (io > 0x1ff) { /* Check a single specified location. */ + err = at1700_probe1(dev, io); + } else if (io != 0) { /* Don't probe at all. */ + err = -ENXIO; + } else { + for (port = at1700_probe_list; *port; port++) { + if (at1700_probe1(dev, *port) == 0) + break; + dev->irq = irq; + } + if (!*port) + err = -ENODEV; + } + if (err) + goto out; + err = register_netdev(dev); + if (err) + goto out1; + return dev; +out1: + cleanup_card(dev); +out: + free_netdev(dev); + return ERR_PTR(err); +} + +/* The Fujitsu datasheet suggests that the NIC be probed for by checking its + "signature", the default bit pattern after a reset. This *doesn't* work -- + there is no way to reset the bus interface without a complete power-cycle! + + It turns out that ATI came to the same conclusion I did: the only thing + that can be done is checking a few bits and then diving right into an + EEPROM read. */ + +static int __init at1700_probe1(struct net_device *dev, int ioaddr) +{ + char fmv_irqmap[4] = {3, 7, 10, 15}; + char fmv_irqmap_pnp[8] = {3, 4, 5, 7, 9, 10, 11, 15}; + char at1700_irqmap[8] = {3, 4, 5, 9, 10, 11, 14, 15}; + unsigned int i, irq, is_fmv18x = 0, is_at1700 = 0; + int slot, ret = -ENODEV; + struct net_local *lp = netdev_priv(dev); + + if (!request_region(ioaddr, AT1700_IO_EXTENT, DRV_NAME)) + return -EBUSY; + + /* Resetting the chip doesn't reset the ISA interface, so don't bother. + That means we have to be careful with the register values we probe + for. + */ +#ifdef notdef + printk("at1700 probe at %#x, eeprom is %4.4x %4.4x %4.4x ctrl %4.4x.\n", + ioaddr, read_eeprom(ioaddr, 4), read_eeprom(ioaddr, 5), + read_eeprom(ioaddr, 6), inw(ioaddr + EEPROM_Ctrl)); +#endif + +#ifdef CONFIG_MCA_LEGACY + /* rEnE (rene@bss.lu): got this from 3c509 driver source , adapted for AT1720 */ + + /* Based on Erik Nygren's (nygren@mit.edu) 3c529 patch, heavily + modified by Chris Beauregard (cpbeaure@csclub.uwaterloo.ca) + to support standard MCA probing. */ + + /* redone for multi-card detection by ZP Gu (zpg@castle.net) */ + /* now works as a module */ + + if (MCA_bus) { + int j; + int l_i; + u_char pos3, pos4; + + for (j = 0; at1720_mca_adapters[j].name != NULL; j ++) { + slot = 0; + while (slot != MCA_NOTFOUND) { + + slot = mca_find_unused_adapter( at1720_mca_adapters[j].id, slot ); + if (slot == MCA_NOTFOUND) break; + + /* if we get this far, an adapter has been detected and is + enabled */ + + pos3 = mca_read_stored_pos( slot, 3 ); + pos4 = mca_read_stored_pos( slot, 4 ); + + for (l_i = 0; l_i < 0x09; l_i++) + if (( pos3 & 0x07) == at1700_ioaddr_pattern[l_i]) + break; + ioaddr = at1700_mca_probe_list[l_i]; + + for (irq = 0; irq < 0x10; irq++) + if (((((pos4>>4) & 0x0f) | (pos3 & 0xf0)) & 0xff) == at1700_irq_pattern[irq]) + break; + + /* probing for a card at a particular IO/IRQ */ + if ((dev->irq && dev->irq != irq) || + (dev->base_addr && dev->base_addr != ioaddr)) { + slot++; /* probing next slot */ + continue; + } + + dev->irq = irq; + + /* claim the slot */ + mca_set_adapter_name( slot, at1720_mca_adapters[j].name ); + mca_mark_as_used(slot); + + goto found; + } + } + /* if we get here, we didn't find an MCA adapter - try ISA */ + } +#endif + slot = -1; + /* We must check for the EEPROM-config boards first, else accessing + IOCONFIG0 will move the board! */ + if (at1700_probe_list[inb(ioaddr + IOCONFIG1) & 0x07] == ioaddr + && read_eeprom(ioaddr, 4) == 0x0000 + && (read_eeprom(ioaddr, 5) & 0xff00) == 0xF400) + is_at1700 = 1; + else if (inb(ioaddr + SAPROM ) == 0x00 + && inb(ioaddr + SAPROM + 1) == 0x00 + && inb(ioaddr + SAPROM + 2) == 0x0e) + is_fmv18x = 1; + else { + goto err_out; + } + +#ifdef CONFIG_MCA_LEGACY +found: +#endif + + /* Reset the internal state machines. */ + outb(0, ioaddr + RESET); + + if (is_at1700) { + irq = at1700_irqmap[(read_eeprom(ioaddr, 12)&0x04) + | (read_eeprom(ioaddr, 0)>>14)]; + } else { + /* Check PnP mode for FMV-183/184/183A/184A. */ + /* This PnP routine is very poor. IO and IRQ should be known. */ + if (inb(ioaddr + CARDSTATUS1) & 0x20) { + irq = dev->irq; + for (i = 0; i < 8; i++) { + if (irq == fmv_irqmap_pnp[i]) + break; + } + if (i == 8) { + goto err_mca; + } + } else { + if (fmv18x_probe_list[inb(ioaddr + IOCONFIG) & 0x07] != ioaddr) + goto err_mca; + irq = fmv_irqmap[(inb(ioaddr + IOCONFIG)>>6) & 0x03]; + } + } + + printk("%s: %s found at %#3x, IRQ %d, address ", dev->name, + is_at1700 ? "AT1700" : "FMV-18X", ioaddr, irq); + + dev->base_addr = ioaddr; + dev->irq = irq; + + if (is_at1700) { + for(i = 0; i < 3; i++) { + unsigned short eeprom_val = read_eeprom(ioaddr, 4+i); + printk("%04x", eeprom_val); + ((unsigned short *)dev->dev_addr)[i] = ntohs(eeprom_val); + } + } else { + for(i = 0; i < 6; i++) { + unsigned char val = inb(ioaddr + SAPROM + i); + printk("%02x", val); + dev->dev_addr[i] = val; + } + } + + /* The EEPROM word 12 bit 0x0400 means use regular 100 ohm 10baseT signals, + rather than 150 ohm shielded twisted pair compensation. + 0x0000 == auto-sense the interface + 0x0800 == use TP interface + 0x1800 == use coax interface + */ + { + const char *porttype[] = {"auto-sense", "10baseT", "auto-sense", "10base2"}; + if (is_at1700) { + ushort setup_value = read_eeprom(ioaddr, 12); + dev->if_port = setup_value >> 8; + } else { + ushort setup_value = inb(ioaddr + CARDSTATUS); + switch (setup_value & 0x07) { + case 0x01: /* 10base5 */ + case 0x02: /* 10base2 */ + dev->if_port = 0x18; break; + case 0x04: /* 10baseT */ + dev->if_port = 0x08; break; + default: /* auto-sense */ + dev->if_port = 0x00; break; + } + } + printk(" %s interface.\n", porttype[(dev->if_port>>3) & 3]); + } + + /* Set the configuration register 0 to 32K 100ns. byte-wide memory, 16 bit + bus access, two 4K Tx queues, and disabled Tx and Rx. */ + outb(0xda, ioaddr + CONFIG_0); + + /* Set the station address in bank zero. */ + outb(0x00, ioaddr + CONFIG_1); + for (i = 0; i < 6; i++) + outb(dev->dev_addr[i], ioaddr + PORT_OFFSET(8 + i)); + + /* Switch to bank 1 and set the multicast table to accept none. */ + outb(0x04, ioaddr + CONFIG_1); + for (i = 0; i < 8; i++) + outb(0x00, ioaddr + PORT_OFFSET(8 + i)); + + + /* Switch to bank 2 */ + /* Lock our I/O address, and set manual processing mode for 16 collisions. */ + outb(0x08, ioaddr + CONFIG_1); + outb(dev->if_port, ioaddr + MODE13); + outb(0x00, ioaddr + COL16CNTL); + + if (net_debug) + printk(version); + + memset(lp, 0, sizeof(struct net_local)); + + dev->open = net_open; + dev->stop = net_close; + dev->hard_start_xmit = net_send_packet; + dev->get_stats = net_get_stats; + dev->set_multicast_list = &set_rx_mode; + dev->tx_timeout = net_tx_timeout; + dev->watchdog_timeo = TX_TIMEOUT; + + spin_lock_init(&lp->lock); + + lp->jumpered = is_fmv18x; + lp->mca_slot = slot; + /* Snarf the interrupt vector now. */ + ret = request_irq(irq, &net_interrupt, 0, DRV_NAME, dev); + if (ret) { + printk (" AT1700 at %#3x is unusable due to a conflict on" + "IRQ %d.\n", ioaddr, irq); + goto err_mca; + } + + return 0; + +err_mca: +#ifdef CONFIG_MCA_LEGACY + if (slot >= 0) + mca_mark_as_unused(slot); +#endif +err_out: + release_region(ioaddr, AT1700_IO_EXTENT); + return ret; +} + + +/* EEPROM_Ctrl bits. */ +#define EE_SHIFT_CLK 0x40 /* EEPROM shift clock, in reg. 16. */ +#define EE_CS 0x20 /* EEPROM chip select, in reg. 16. */ +#define EE_DATA_WRITE 0x80 /* EEPROM chip data in, in reg. 17. */ +#define EE_DATA_READ 0x80 /* EEPROM chip data out, in reg. 17. */ + +/* The EEPROM commands include the alway-set leading bit. */ +#define EE_WRITE_CMD (5 << 6) +#define EE_READ_CMD (6 << 6) +#define EE_ERASE_CMD (7 << 6) + +static int __init read_eeprom(long ioaddr, int location) +{ + int i; + unsigned short retval = 0; + long ee_addr = ioaddr + EEPROM_Ctrl; + long ee_daddr = ioaddr + EEPROM_Data; + int read_cmd = location | EE_READ_CMD; + + /* Shift the read command bits out. */ + for (i = 9; i >= 0; i--) { + short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; + outb(EE_CS, ee_addr); + outb(dataval, ee_daddr); + outb(EE_CS | EE_SHIFT_CLK, ee_addr); /* EEPROM clock tick. */ + } + outb(EE_DATA_WRITE, ee_daddr); + for (i = 16; i > 0; i--) { + outb(EE_CS, ee_addr); + outb(EE_CS | EE_SHIFT_CLK, ee_addr); + retval = (retval << 1) | ((inb(ee_daddr) & EE_DATA_READ) ? 1 : 0); + } + + /* Terminate the EEPROM access. */ + outb(EE_CS, ee_addr); + outb(EE_SHIFT_CLK, ee_addr); + outb(0, ee_addr); + return retval; +} + + + +static int net_open(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + + /* Set the configuration register 0 to 32K 100ns. byte-wide memory, 16 bit + bus access, and two 4K Tx queues. */ + outb(0x5a, ioaddr + CONFIG_0); + + /* Powerup, switch to register bank 2, and enable the Rx and Tx. */ + outb(0xe8, ioaddr + CONFIG_1); + + lp->tx_started = 0; + lp->tx_queue_ready = 1; + lp->rx_started = 0; + lp->tx_queue = 0; + lp->tx_queue_len = 0; + + /* Turn on hardware Tx and Rx interrupts. */ + outb(0x82, ioaddr + TX_INTR); + outb(0x81, ioaddr + RX_INTR); + + /* Enable the IRQ on boards of fmv18x it is feasible. */ + if (lp->jumpered) { + outb(0x80, ioaddr + IOCONFIG1); + } + + netif_start_queue(dev); + return 0; +} + +static void net_tx_timeout (struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + + printk ("%s: transmit timed out with status %04x, %s?\n", dev->name, + inw (ioaddr + STATUS), inb (ioaddr + TX_STATUS) & 0x80 + ? "IRQ conflict" : "network cable problem"); + printk ("%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n", + dev->name, inw(ioaddr + TX_STATUS), inw(ioaddr + TX_INTR), inw(ioaddr + TX_MODE), + inw(ioaddr + CONFIG_0), inw(ioaddr + DATAPORT), inw(ioaddr + TX_START), + inw(ioaddr + MODE13 - 1), inw(ioaddr + RX_CTRL)); + lp->stats.tx_errors++; + /* ToDo: We should try to restart the adaptor... */ + outw(0xffff, ioaddr + MODE24); + outw (0xffff, ioaddr + TX_STATUS); + outb (0x5a, ioaddr + CONFIG_0); + outb (0xe8, ioaddr + CONFIG_1); + outw (0x8182, ioaddr + TX_INTR); + outb (0x00, ioaddr + TX_START); + outb (0x03, ioaddr + COL16CNTL); + + dev->trans_start = jiffies; + + lp->tx_started = 0; + lp->tx_queue_ready = 1; + lp->rx_started = 0; + lp->tx_queue = 0; + lp->tx_queue_len = 0; + + netif_wake_queue(dev); +} + + +static int net_send_packet (struct sk_buff *skb, struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; + short len = skb->len; + unsigned char *buf = skb->data; + static u8 pad[ETH_ZLEN]; + + netif_stop_queue (dev); + + /* We may not start transmitting unless we finish transferring + a packet into the Tx queue. During executing the following + codes we possibly catch a Tx interrupt. Thus we flag off + tx_queue_ready, so that we prevent the interrupt routine + (net_interrupt) to start transmitting. */ + lp->tx_queue_ready = 0; + { + outw (length, ioaddr + DATAPORT); + /* Packet data */ + outsw (ioaddr + DATAPORT, buf, len >> 1); + /* Check for dribble byte */ + if (len & 1) { + outw(skb->data[skb->len-1], ioaddr + DATAPORT); + len++; + } + /* Check for packet padding */ + if (length != skb->len) + outsw(ioaddr + DATAPORT, pad, (length - len + 1) >> 1); + + lp->tx_queue++; + lp->tx_queue_len += length + 2; + } + lp->tx_queue_ready = 1; + + if (lp->tx_started == 0) { + /* If the Tx is idle, always trigger a transmit. */ + outb (0x80 | lp->tx_queue, ioaddr + TX_START); + lp->tx_queue = 0; + lp->tx_queue_len = 0; + dev->trans_start = jiffies; + lp->tx_started = 1; + netif_start_queue (dev); + } else if (lp->tx_queue_len < 4096 - 1502) + /* Yes, there is room for one more packet. */ + netif_start_queue (dev); + dev_kfree_skb (skb); + + return 0; +} + +/* The typical workload of the driver: + Handle the network interface interrupts. */ +static irqreturn_t +net_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct net_local *lp; + int ioaddr, status; + int handled = 0; + + if (dev == NULL) { + printk ("at1700_interrupt(): irq %d for unknown device.\n", irq); + return IRQ_NONE; + } + + ioaddr = dev->base_addr; + lp = netdev_priv(dev); + + spin_lock (&lp->lock); + + status = inw(ioaddr + TX_STATUS); + outw(status, ioaddr + TX_STATUS); + + if (net_debug > 4) + printk("%s: Interrupt with status %04x.\n", dev->name, status); + if (lp->rx_started == 0 && + (status & 0xff00 || (inb(ioaddr + RX_MODE) & 0x40) == 0)) { + /* Got a packet(s). + We cannot execute net_rx more than once at the same time for + the same device. During executing net_rx, we possibly catch a + Tx interrupt. Thus we flag on rx_started, so that we prevent + the interrupt routine (net_interrupt) to dive into net_rx + again. */ + handled = 1; + lp->rx_started = 1; + outb(0x00, ioaddr + RX_INTR); /* Disable RX intr. */ + net_rx(dev); + outb(0x81, ioaddr + RX_INTR); /* Enable RX intr. */ + lp->rx_started = 0; + } + if (status & 0x00ff) { + handled = 1; + if (status & 0x02) { + /* More than 16 collisions occurred */ + if (net_debug > 4) + printk("%s: 16 Collision occur during Txing.\n", dev->name); + /* Cancel sending a packet. */ + outb(0x03, ioaddr + COL16CNTL); + lp->stats.collisions++; + } + if (status & 0x82) { + lp->stats.tx_packets++; + /* The Tx queue has any packets and is not being + transferred a packet from the host, start + transmitting. */ + if (lp->tx_queue && lp->tx_queue_ready) { + outb(0x80 | lp->tx_queue, ioaddr + TX_START); + lp->tx_queue = 0; + lp->tx_queue_len = 0; + dev->trans_start = jiffies; + netif_wake_queue (dev); + } else { + lp->tx_started = 0; + netif_wake_queue (dev); + } + } + } + + spin_unlock (&lp->lock); + return IRQ_RETVAL(handled); +} + +/* We have a good packet(s), get it/them out of the buffers. */ +static void +net_rx(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + int boguscount = 5; + + while ((inb(ioaddr + RX_MODE) & 0x40) == 0) { + ushort status = inw(ioaddr + DATAPORT); + ushort pkt_len = inw(ioaddr + DATAPORT); + + if (net_debug > 4) + printk("%s: Rxing packet mode %02x status %04x.\n", + dev->name, inb(ioaddr + RX_MODE), status); +#ifndef final_version + if (status == 0) { + outb(0x05, ioaddr + RX_CTRL); + break; + } +#endif + + if ((status & 0xF0) != 0x20) { /* There was an error. */ + lp->stats.rx_errors++; + if (status & 0x08) lp->stats.rx_length_errors++; + if (status & 0x04) lp->stats.rx_frame_errors++; + if (status & 0x02) lp->stats.rx_crc_errors++; + if (status & 0x01) lp->stats.rx_over_errors++; + } else { + /* Malloc up new buffer. */ + struct sk_buff *skb; + + if (pkt_len > 1550) { + printk("%s: The AT1700 claimed a very large packet, size %d.\n", + dev->name, pkt_len); + /* Prime the FIFO and then flush the packet. */ + inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT); + outb(0x05, ioaddr + RX_CTRL); + lp->stats.rx_errors++; + break; + } + skb = dev_alloc_skb(pkt_len+3); + if (skb == NULL) { + printk("%s: Memory squeeze, dropping packet (len %d).\n", + dev->name, pkt_len); + /* Prime the FIFO and then flush the packet. */ + inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT); + outb(0x05, ioaddr + RX_CTRL); + lp->stats.rx_dropped++; + break; + } + skb->dev = dev; + skb_reserve(skb,2); + + insw(ioaddr + DATAPORT, skb_put(skb,pkt_len), (pkt_len + 1) >> 1); + skb->protocol=eth_type_trans(skb, dev); + netif_rx(skb); + dev->last_rx = jiffies; + lp->stats.rx_packets++; + lp->stats.rx_bytes += pkt_len; + } + if (--boguscount <= 0) + break; + } + + /* If any worth-while packets have been received, dev_rint() + has done a mark_bh(NET_BH) for us and will work on them + when we get to the bottom-half routine. */ + { + int i; + for (i = 0; i < 20; i++) { + if ((inb(ioaddr + RX_MODE) & 0x40) == 0x40) + break; + inw(ioaddr + DATAPORT); /* dummy status read */ + outb(0x05, ioaddr + RX_CTRL); + } + + if (net_debug > 5) + printk("%s: Exint Rx packet with mode %02x after %d ticks.\n", + dev->name, inb(ioaddr + RX_MODE), i); + } + return; +} + +/* The inverse routine to net_open(). */ +static int net_close(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + + netif_stop_queue(dev); + + /* Set configuration register 0 to disable Tx and Rx. */ + outb(0xda, ioaddr + CONFIG_0); + + /* No statistic counters on the chip to update. */ + + /* Disable the IRQ on boards of fmv18x where it is feasible. */ + if (lp->jumpered) { + outb(0x00, ioaddr + IOCONFIG1); + free_irq(dev->irq, dev); + } + + /* Power-down the chip. Green, green, green! */ + outb(0x00, ioaddr + CONFIG_1); + return 0; +} + +/* Get the current statistics. + This may be called with the card open or closed. + There are no on-chip counters, so this function is trivial. +*/ +static struct net_device_stats * +net_get_stats(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + return &lp->stats; +} + +/* + Set the multicast/promiscuous mode for this adaptor. +*/ + +static void +set_rx_mode(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + struct net_local *lp = netdev_priv(dev); + unsigned char mc_filter[8]; /* Multicast hash filter */ + unsigned long flags; + int i; + + if (dev->flags & IFF_PROMISC) { + /* Unconditionally log net taps. */ + printk("%s: Promiscuous mode enabled.\n", dev->name); + memset(mc_filter, 0xff, sizeof(mc_filter)); + outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */ + } else if (dev->mc_count > MC_FILTERBREAK + || (dev->flags & IFF_ALLMULTI)) { + /* Too many to filter perfectly -- accept all multicasts. */ + memset(mc_filter, 0xff, sizeof(mc_filter)); + outb(2, ioaddr + RX_MODE); /* Use normal mode. */ + } else if (dev->mc_count == 0) { + memset(mc_filter, 0x00, sizeof(mc_filter)); + outb(1, ioaddr + RX_MODE); /* Ignore almost all multicasts. */ + } else { + struct dev_mc_list *mclist; + int i; + + memset(mc_filter, 0, sizeof(mc_filter)); + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; + i++, mclist = mclist->next) { + unsigned int bit = + ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 26; + mc_filter[bit >> 3] |= (1 << bit); + } + outb(0x02, ioaddr + RX_MODE); /* Use normal mode. */ + } + + spin_lock_irqsave (&lp->lock, flags); + if (memcmp(mc_filter, lp->mc_filter, sizeof(mc_filter))) { + int saved_bank = inw(ioaddr + CONFIG_0); + /* Switch to bank 1 and set the multicast table. */ + outw((saved_bank & ~0x0C00) | 0x0480, ioaddr + CONFIG_0); + for (i = 0; i < 8; i++) + outb(mc_filter[i], ioaddr + PORT_OFFSET(8 + i)); + memcpy(lp->mc_filter, mc_filter, sizeof(mc_filter)); + outw(saved_bank, ioaddr + CONFIG_0); + } + spin_unlock_irqrestore (&lp->lock, flags); + return; +} + +#ifdef MODULE +static struct net_device *dev_at1700; + +module_param(io, int, 0); +module_param(irq, int, 0); +module_param(net_debug, int, 0); +MODULE_PARM_DESC(io, "AT1700/FMV18X I/O base address"); +MODULE_PARM_DESC(irq, "AT1700/FMV18X IRQ number"); +MODULE_PARM_DESC(net_debug, "AT1700/FMV18X debug level (0-6)"); + +int init_module(void) +{ + if (io == 0) + printk("at1700: You should not use auto-probing with insmod!\n"); + dev_at1700 = at1700_probe(-1); + if (IS_ERR(dev_at1700)) + return PTR_ERR(dev_at1700); + return 0; +} + +void +cleanup_module(void) +{ + unregister_netdev(dev_at1700); + cleanup_card(dev_at1700); + free_netdev(dev_at1700); +} +#endif /* MODULE */ +MODULE_LICENSE("GPL"); + + +/* + * Local variables: + * compile-command: "gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c at1700.c" + * alt-compile-command: "gcc -DMODVERSIONS -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c at1700.c" + * tab-width: 4 + * c-basic-offset: 4 + * c-indent-level: 4 + * End: + */ + -- cgit v1.2.1