From 39738e161f7315bfa8f31a91d2262f93d818a7cd Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 26 May 2009 12:35:26 +0000 Subject: 3c5xx: convert printk() to pr_() Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller --- drivers/net/3c523.c | 91 ++++++++++++++++++++++++++++------------------------- 1 file changed, 48 insertions(+), 43 deletions(-) (limited to 'drivers/net/3c523.c') diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c index 8f734d74b513..cdd955c4014c 100644 --- a/drivers/net/3c523.c +++ b/drivers/net/3c523.c @@ -176,7 +176,7 @@ sizeof(nop_cmd) = 8; if(!p->scb->cmd) break; \ DELAY_16(); \ if(i == 1023) { \ - printk(KERN_WARNING "%s:%d: scb_cmd timed out .. resetting i82586\n",\ + pr_warning("%s:%d: scb_cmd timed out .. resetting i82586\n",\ dev->name,__LINE__); \ elmc_id_reset586(); } } } @@ -291,7 +291,7 @@ static int elmc_open(struct net_device *dev) ret = request_irq(dev->irq, &elmc_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev); if (ret) { - printk(KERN_ERR "%s: couldn't get irq %d\n", dev->name, dev->irq); + pr_err("%s: couldn't get irq %d\n", dev->name, dev->irq); elmc_id_reset586(); return ret; } @@ -371,9 +371,9 @@ static void alloc586(struct net_device *dev) DELAY(2); - if (p->iscp->busy) { - printk(KERN_ERR "%s: Init-Problems (alloc).\n", dev->name); - } + if (p->iscp->busy) + pr_err("%s: Init-Problems (alloc).\n", dev->name); + memset((char *) p->scb, 0, sizeof(struct scb_struct)); } @@ -470,7 +470,7 @@ static int __init do_elmc_probe(struct net_device *dev) mca_set_adapter_procfn(slot, (MCA_ProcFn) elmc_getinfo, dev); /* if we get this far, adapter has been found - carry on */ - printk(KERN_INFO "%s: 3c523 adapter found in slot %d\n", dev->name, slot + 1); + pr_info("%s: 3c523 adapter found in slot %d\n", dev->name, slot + 1); /* Now we extract configuration info from the card. The 3c523 provides information in two of the POS registers, but @@ -507,7 +507,7 @@ static int __init do_elmc_probe(struct net_device *dev) memset(pr, 0, sizeof(struct priv)); pr->slot = slot; - printk(KERN_INFO "%s: 3Com 3c523 Rev 0x%x at %#lx\n", dev->name, (int) revision, + pr_info("%s: 3Com 3c523 Rev 0x%x at %#lx\n", dev->name, (int) revision, dev->base_addr); /* Determine if we're using the on-board transceiver (i.e. coax) or @@ -529,7 +529,7 @@ static int __init do_elmc_probe(struct net_device *dev) size = 0x4000; /* check for 16K mem */ if (!check586(dev, dev->mem_start, size)) { - printk(KERN_ERR "%s: memprobe, Can't find memory at 0x%lx!\n", dev->name, + pr_err("%s: memprobe, Can't find memory at 0x%lx!\n", dev->name, dev->mem_start); retval = -ENODEV; goto err_out; @@ -546,7 +546,7 @@ static int __init do_elmc_probe(struct net_device *dev) pr->num_recv_buffs = NUM_RECV_BUFFS_16; /* dump all the assorted information */ - printk(KERN_INFO "%s: IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->name, + pr_info("%s: IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->name, dev->irq, dev->if_port ? "ex" : "in", dev->mem_start, dev->mem_end - 1); @@ -555,7 +555,7 @@ static int __init do_elmc_probe(struct net_device *dev) for (i = 0; i < 6; i++) dev->dev_addr[i] = inb(dev->base_addr + i); - printk(KERN_INFO "%s: hardware address %pM\n", + pr_info("%s: hardware address %pM\n", dev->name, dev->dev_addr); dev->netdev_ops = &netdev_ops; @@ -660,7 +660,7 @@ static int init586(struct net_device *dev) } if ((cfg_cmd->cmd_status & (STAT_OK | STAT_COMPL)) != (STAT_COMPL | STAT_OK)) { - printk(KERN_WARNING "%s (elmc): configure command failed: %x\n", dev->name, cfg_cmd->cmd_status); + pr_warning("%s (elmc): configure command failed: %x\n", dev->name, cfg_cmd->cmd_status); return 1; } /* @@ -686,7 +686,8 @@ static int init586(struct net_device *dev) } if ((ias_cmd->cmd_status & (STAT_OK | STAT_COMPL)) != (STAT_OK | STAT_COMPL)) { - printk(KERN_WARNING "%s (elmc): individual address setup command failed: %04x\n", dev->name, ias_cmd->cmd_status); + pr_warning("%s (elmc): individual address setup command failed: %04x\n", + dev->name, ias_cmd->cmd_status); return 1; } /* @@ -707,7 +708,7 @@ static int init586(struct net_device *dev) s = jiffies; while (!(tdr_cmd->cmd_status & STAT_COMPL)) { if (time_after(jiffies, s + 30*HZ/100)) { - printk(KERN_WARNING "%s: %d Problems while running the TDR.\n", dev->name, __LINE__); + pr_warning("%s: %d Problems while running the TDR.\n", dev->name, __LINE__); result = 1; break; } @@ -723,14 +724,14 @@ static int init586(struct net_device *dev) if (result & TDR_LNK_OK) { /* empty */ } else if (result & TDR_XCVR_PRB) { - printk(KERN_WARNING "%s: TDR: Transceiver problem!\n", dev->name); + pr_warning("%s: TDR: Transceiver problem!\n", dev->name); } else if (result & TDR_ET_OPN) { - printk(KERN_WARNING "%s: TDR: No correct termination %d clocks away.\n", dev->name, result & TDR_TIMEMASK); + pr_warning("%s: TDR: No correct termination %d clocks away.\n", dev->name, result & TDR_TIMEMASK); } else if (result & TDR_ET_SRT) { if (result & TDR_TIMEMASK) /* time == 0 -> strange :-) */ - printk(KERN_WARNING "%s: TDR: Detected a short circuit %d clocks away.\n", dev->name, result & TDR_TIMEMASK); + pr_warning("%s: TDR: Detected a short circuit %d clocks away.\n", dev->name, result & TDR_TIMEMASK); } else { - printk(KERN_WARNING "%s: TDR: Unknown status %04x\n", dev->name, result); + pr_warning("%s: TDR: Unknown status %04x\n", dev->name, result); } } /* @@ -774,11 +775,11 @@ static int init586(struct net_device *dev) /* I don't understand this: do we really need memory after the init? */ int len = ((char *) p->iscp - (char *) ptr - 8) / 6; if (len <= 0) { - printk(KERN_ERR "%s: Ooooops, no memory for MC-Setup!\n", dev->name); + pr_err("%s: Ooooops, no memory for MC-Setup!\n", dev->name); } else { if (len < num_addrs) { num_addrs = len; - printk(KERN_WARNING "%s: Sorry, can only apply %d MC-Address(es).\n", + pr_warning("%s: Sorry, can only apply %d MC-Address(es).\n", dev->name, num_addrs); } mc_cmd = (struct mcsetup_cmd_struct *) ptr; @@ -799,7 +800,7 @@ static int init586(struct net_device *dev) break; } if (!(mc_cmd->cmd_status & STAT_COMPL)) { - printk(KERN_WARNING "%s: Can't apply multicast-address-list.\n", dev->name); + pr_warning("%s: Can't apply multicast-address-list.\n", dev->name); } } } @@ -812,7 +813,7 @@ static int init586(struct net_device *dev) p->xmit_buffs[i] = (struct tbd_struct *) ptr; /* TBD */ ptr = (char *) ptr + sizeof(struct tbd_struct); if ((void *) ptr > (void *) p->iscp) { - printk(KERN_ERR "%s: not enough shared-mem for your configuration!\n", dev->name); + pr_err("%s: not enough shared-mem for your configuration!\n", dev->name); return 1; } memset((char *) (p->xmit_cmds[i]), 0, sizeof(struct transmit_cmd_struct)); @@ -936,7 +937,8 @@ elmc_interrupt(int irq, void *dev_id) if (stat & STAT_CNA) { /* CU went 'not ready' */ if (netif_running(dev)) { - printk(KERN_WARNING "%s: oops! CU has left active state. stat: %04x/%04x.\n", dev->name, (int) stat, (int) p->scb->status); + pr_warning("%s: oops! CU has left active state. stat: %04x/%04x.\n", + dev->name, (int) stat, (int) p->scb->status); } } #endif @@ -951,7 +953,8 @@ elmc_interrupt(int irq, void *dev_id) p->scb->cmd = RUC_RESUME; elmc_attn586(); } else { - printk(KERN_WARNING "%s: Receiver-Unit went 'NOT READY': %04x/%04x.\n", dev->name, (int) stat, (int) p->scb->status); + pr_warning("%s: Receiver-Unit went 'NOT READY': %04x/%04x.\n", + dev->name, (int) stat, (int) p->scb->status); elmc_rnr_int(dev); } } @@ -995,11 +998,11 @@ static void elmc_rcv_int(struct net_device *dev) dev->stats.rx_dropped++; } } else { - printk(KERN_WARNING "%s: received oversized frame.\n", dev->name); + pr_warning("%s: received oversized frame.\n", dev->name); dev->stats.rx_dropped++; } } else { /* frame !(ok), only with 'save-bad-frames' */ - printk(KERN_WARNING "%s: oops! rfd-error-status: %04x\n", dev->name, status); + pr_warning("%s: oops! rfd-error-status: %04x\n", dev->name, status); dev->stats.rx_errors++; } p->rfd_top->status = 0; @@ -1028,7 +1031,7 @@ static void elmc_rnr_int(struct net_device *dev) alloc_rfa(dev, (char *) p->rfd_first); startrecv586(dev); /* restart RU */ - printk(KERN_WARNING "%s: Receive-Unit restarted. Status: %04x\n", dev->name, p->scb->status); + pr_warning("%s: Receive-Unit restarted. Status: %04x\n", dev->name, p->scb->status); } @@ -1043,7 +1046,7 @@ static void elmc_xmt_int(struct net_device *dev) status = p->xmit_cmds[p->xmit_last]->cmd_status; if (!(status & STAT_COMPL)) { - printk(KERN_WARNING "%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name); + pr_warning("%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name); } if (status & STAT_OK) { dev->stats.tx_packets++; @@ -1051,18 +1054,18 @@ static void elmc_xmt_int(struct net_device *dev) } else { dev->stats.tx_errors++; if (status & TCMD_LATECOLL) { - printk(KERN_WARNING "%s: late collision detected.\n", dev->name); + pr_warning("%s: late collision detected.\n", dev->name); dev->stats.collisions++; } else if (status & TCMD_NOCARRIER) { dev->stats.tx_carrier_errors++; - printk(KERN_WARNING "%s: no carrier detected.\n", dev->name); + pr_warning("%s: no carrier detected.\n", dev->name); } else if (status & TCMD_LOSTCTS) { - printk(KERN_WARNING "%s: loss of CTS detected.\n", dev->name); + pr_warning("%s: loss of CTS detected.\n", dev->name); } else if (status & TCMD_UNDERRUN) { dev->stats.tx_fifo_errors++; - printk(KERN_WARNING "%s: DMA underrun detected.\n", dev->name); + pr_warning("%s: DMA underrun detected.\n", dev->name); } else if (status & TCMD_MAXCOLL) { - printk(KERN_WARNING "%s: Max. collisions exceeded.\n", dev->name); + pr_warning("%s: Max. collisions exceeded.\n", dev->name); dev->stats.collisions += 16; } } @@ -1099,10 +1102,11 @@ static void elmc_timeout(struct net_device *dev) struct priv *p = netdev_priv(dev); /* COMMAND-UNIT active? */ if (p->scb->status & CU_ACTIVE) { -#ifdef DEBUG - printk("%s: strange ... timeout with CU active?!?\n", dev->name); - printk("%s: X0: %04x N0: %04x N1: %04x %d\n", dev->name, (int) p->xmit_cmds[0]->cmd_status, (int) p->nop_cmds[0]->cmd_status, (int) p->nop_cmds[1]->cmd_status, (int) p->nop_point); -#endif + pr_debug("%s: strange ... timeout with CU active?!?\n", dev->name); + pr_debug("%s: X0: %04x N0: %04x N1: %04x %d\n", dev->name, + (int)p->xmit_cmds[0]->cmd_status, + (int)p->nop_cmds[0]->cmd_status, + (int)p->nop_cmds[1]->cmd_status, (int)p->nop_point); p->scb->cmd = CUC_ABORT; elmc_attn586(); WAIT_4_SCB_CMD(); @@ -1112,10 +1116,10 @@ static void elmc_timeout(struct net_device *dev) WAIT_4_SCB_CMD(); netif_wake_queue(dev); } else { -#ifdef DEBUG - printk("%s: xmitter timed out, try to restart! stat: %04x\n", dev->name, p->scb->status); - printk("%s: command-stats: %04x %04x\n", dev->name, p->xmit_cmds[0]->cmd_status, p->xmit_cmds[1]->cmd_status); -#endif + pr_debug("%s: xmitter timed out, try to restart! stat: %04x\n", + dev->name, p->scb->status); + pr_debug("%s: command-stats: %04x %04x\n", dev->name, + p->xmit_cmds[0]->cmd_status, p->xmit_cmds[1]->cmd_status); elmc_close(dev); elmc_open(dev); } @@ -1162,7 +1166,7 @@ static int elmc_send_packet(struct sk_buff *skb, struct net_device *dev) break; } if (i == 15) { - printk(KERN_WARNING "%s: Can't start transmit-command.\n", dev->name); + pr_warning("%s: Can't start transmit-command.\n", dev->name); } } #else @@ -1287,11 +1291,12 @@ int __init init_module(void) free_netdev(dev); if (io[this_dev]==0) break; - printk(KERN_WARNING "3c523.c: No 3c523 card found at io=%#x\n",io[this_dev]); + pr_warning("3c523.c: No 3c523 card found at io=%#x\n",io[this_dev]); } if(found==0) { - if(io[0]==0) printk(KERN_NOTICE "3c523.c: No 3c523 cards found\n"); + if (io[0]==0) + pr_notice("3c523.c: No 3c523 cards found\n"); return -ENXIO; } else return 0; } -- cgit v1.2.1