From 788a6cddda9ba83276e37567c17bb78406904074 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Tue, 4 Aug 2015 10:26:16 -0500 Subject: mtd: spi-nor: fsl-quadspi: fix unsupported cmd when run flash_erase Erase function will use cmd 0x20 (SPINOR_OP_BE_4K) if kenrel enable option CONFIG_MTD_SPI_NOR_USE_4K_SECTORS. This command is not in fsl-quadspi driver LUT. So driver continue report fsl-quadspi 21e0000.qspi: Unsupported cmd 0x20. This patch fix this issue. Signed-off-by: Frank Li Acked-by: Han Xu Signed-off-by: Brian Norris --- drivers/mtd/spi-nor/fsl-quadspi.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c index 0144821a3692..d32b7e04ccca 100644 --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -397,14 +397,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) /* Erase a sector */ lut_base = SEQID_SE * 4; - if (q->nor_size <= SZ_16M) { - cmd = SPINOR_OP_SE; - addrlen = ADDR24BIT; - } else { - /* use the 4-byte address */ - cmd = SPINOR_OP_SE; - addrlen = ADDR32BIT; - } + cmd = q->nor[0].erase_opcode; + addrlen = q->nor_size <= SZ_16M ? ADDR24BIT : ADDR32BIT; writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), base + QUADSPI_LUT(lut_base)); @@ -473,6 +467,8 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd) case SPINOR_OP_BRWR: return SEQID_BRWR; default: + if (cmd == q->nor[0].erase_opcode) + return SEQID_SE; dev_err(q->dev, "Unsupported cmd 0x%.2x\n", cmd); break; } -- cgit v1.2.1