From 422485da15e7e9e6f71a5efd1aa2248595cb486d Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 8 Jul 2016 10:36:39 -0700 Subject: mtd: nand: brcmnand: Change BUG_ON in brcmnand_send_cmd Change the BUG_ON() condition in brcmnand_send_cmd() which checks for the interrupt status "controller ready" bit to a WARN_ON. There is no good reason to kill the system when this condition occur because we could have systems which listed the NAND controller as available (e.g: from Device Tree), but the NAND chip could be malfunctioning and not responding. Signed-off-by: Florian Fainelli Acked-by: Brian Norris Reviewed-by: Kamal Dasu Signed-off-by: Brian Norris --- drivers/mtd/nand/brcmnand/brcmnand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c index faca01d6e0f9..8eb2c64df38c 100644 --- a/drivers/mtd/nand/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/brcmnand/brcmnand.c @@ -1165,7 +1165,7 @@ static void brcmnand_send_cmd(struct brcmnand_host *host, int cmd) ctrl->cmd_pending = cmd; intfc = brcmnand_read_reg(ctrl, BRCMNAND_INTFC_STATUS); - BUG_ON(!(intfc & INTFC_CTLR_READY)); + WARN_ON(!(intfc & INTFC_CTLR_READY)); mb(); /* flush previous writes */ brcmnand_write_reg(ctrl, BRCMNAND_CMD_START, -- cgit v1.2.1