From d191634f7ab3a1c8e9da0c5e986c30b2612f0eb0 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sat, 5 Nov 2005 10:36:35 +0000 Subject: [MMC] Use controller id instead of driver name for printks The printks that aren't for debugging should use the name of the controller, not the driver name. Multiple MMC controllers aren't that common today, but this is the right way to do things. Signed-off-by: Pierre Ossman Signed-off-by: Russell King --- drivers/mmc/wbsd.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index ea0c4b3361bf..4ff67e7363d9 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -201,7 +201,7 @@ static void wbsd_reset(struct wbsd_host* host) { u8 setup; - printk(KERN_ERR DRIVER_NAME ": Resetting chip\n"); + printk(KERN_ERR "%s: Resetting chip\n", mmc_hostname(host->mmc)); /* * Soft reset of chip (SD/MMC part). @@ -880,8 +880,9 @@ static void wbsd_finish_data(struct wbsd_host* host, struct mmc_data* data) */ if (count) { - printk(KERN_ERR DRIVER_NAME ": Incomplete DMA " - "transfer. %d bytes left.\n", count); + printk(KERN_ERR "%s: Incomplete DMA transfer. " + "%d bytes left.\n", + mmc_hostname(host->mmc), count); data->error = MMC_ERR_FAILED; } @@ -1169,8 +1170,8 @@ static void wbsd_tasklet_card(unsigned long param) if (host->mrq) { - printk(KERN_ERR DRIVER_NAME - ": Card removed during transfer!\n"); + printk(KERN_ERR "%s: Card removed during transfer!\n", + mmc_hostname(host->mmc)); wbsd_reset(host); host->mrq->cmd->error = MMC_ERR_FAILED; -- cgit v1.2.1