From 73ee29460e5d0adbb46e4962df69ae2465746612 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 27 Nov 2012 18:48:33 +0000 Subject: regulator: arizona-ldo1: Support 1.8V mode Some Arizona device support a 1.8V output mode. Enable this in the driver. Signed-off-by: Mark Brown --- drivers/mfd/wm5102-tables.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/mfd/wm5102-tables.c') diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c index 01b9255ed631..b829a5710ddc 100644 --- a/drivers/mfd/wm5102-tables.c +++ b/drivers/mfd/wm5102-tables.c @@ -775,6 +775,7 @@ static const struct reg_default wm5102_reg_default[] = { { 0x00000154, 0x0000 }, /* R340 - Rate Estimator 3 */ { 0x00000155, 0x0000 }, /* R341 - Rate Estimator 4 */ { 0x00000156, 0x0000 }, /* R342 - Rate Estimator 5 */ + { 0x00000161, 0x0000 }, /* R353 - Dynamic Frequency Scaling 1 */ { 0x00000171, 0x0000 }, /* R369 - FLL1 Control 1 */ { 0x00000172, 0x0008 }, /* R370 - FLL1 Control 2 */ { 0x00000173, 0x0018 }, /* R371 - FLL1 Control 3 */ @@ -1564,6 +1565,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg) case ARIZONA_RATE_ESTIMATOR_3: case ARIZONA_RATE_ESTIMATOR_4: case ARIZONA_RATE_ESTIMATOR_5: + case ARIZONA_DYNAMIC_FREQUENCY_SCALING_1: case ARIZONA_FLL1_CONTROL_1: case ARIZONA_FLL1_CONTROL_2: case ARIZONA_FLL1_CONTROL_3: @@ -1596,6 +1598,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg) case ARIZONA_FLL2_GPIO_CLOCK: case ARIZONA_MIC_CHARGE_PUMP_1: case ARIZONA_LDO1_CONTROL_1: + case ARIZONA_LDO1_CONTROL_2: case ARIZONA_LDO2_CONTROL_1: case ARIZONA_MIC_BIAS_CTRL_1: case ARIZONA_MIC_BIAS_CTRL_2: -- cgit v1.2.1