From 66e89522aff70fb2701ba8f6845fdcd365dd2ade Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Tue, 1 Jun 2010 17:32:08 -0300 Subject: V4L/DVB: IR: add mceusb IR receiver driver This is a new driver for the Windows Media Center Edition/eHome Infrared Remote transceiver devices. Its a port of the current lirc_mceusb driver to ir-core, and currently lacks transmit support, but will grow it back soon enough... This driver also differs from lirc_mceusb in that it borrows heavily from a simplified IR buffer decode routine found in Jon Smirl's earlier ir-mceusb port. This driver has been tested on the original first-generation MCE IR device with the MS vendor ID, as well as a current-generation device with a Topseed vendor ID. Every receiver supported by lirc_mceusb should work equally well. Testing was done primarily with RC6 MCE remotes, but also briefly with a Hauppauge RC5 remote, and all works as expected. v2: fix call to ir_raw_event_handle so repeats work as they should. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/IR/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/media/IR/Makefile') diff --git a/drivers/media/IR/Makefile b/drivers/media/IR/Makefile index b998fcced2e4..b43fe36d88b2 100644 --- a/drivers/media/IR/Makefile +++ b/drivers/media/IR/Makefile @@ -13,3 +13,4 @@ obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o # stand-alone IR receivers/transmitters obj-$(CONFIG_IR_IMON) += imon.o +obj-$(CONFIG_IR_MCEUSB) += mceusb.o -- cgit v1.2.1