From cd314fa6375b4de092a5b1de6aa194117523ecbb Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Sat, 24 Dec 2011 00:09:04 -0800 Subject: Input: mpu3050 - configure the sampling method This will improve the output of the sensor. Signed-off-by: Heikki Krogerus Signed-off-by: Kirill A. Shutemov Signed-off-by: Alan Cox Signed-off-by: Dmitry Torokhov --- drivers/input/misc/mpu3050.c | 108 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 103 insertions(+), 5 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c index ebec0baa1e36..208d1a1cc7f3 100644 --- a/drivers/input/misc/mpu3050.c +++ b/drivers/input/misc/mpu3050.c @@ -41,18 +41,67 @@ #include #include -#define MPU3050_CHIP_ID_REG 0x00 #define MPU3050_CHIP_ID 0x69 -#define MPU3050_XOUT_H 0x1D -#define MPU3050_PWR_MGM 0x3E -#define MPU3050_PWR_MGM_POS 6 -#define MPU3050_PWR_MGM_MASK 0x40 #define MPU3050_AUTO_DELAY 1000 #define MPU3050_MIN_VALUE -32768 #define MPU3050_MAX_VALUE 32767 +#define MPU3050_DEFAULT_POLL_INTERVAL 200 +#define MPU3050_DEFAULT_FS_RANGE 3 + +/* Register map */ +#define MPU3050_CHIP_ID_REG 0x00 +#define MPU3050_SMPLRT_DIV 0x15 +#define MPU3050_DLPF_FS_SYNC 0x16 +#define MPU3050_INT_CFG 0x17 +#define MPU3050_XOUT_H 0x1D +#define MPU3050_PWR_MGM 0x3E +#define MPU3050_PWR_MGM_POS 6 + +/* Register bits */ + +/* DLPF_FS_SYNC */ +#define MPU3050_EXT_SYNC_NONE 0x00 +#define MPU3050_EXT_SYNC_TEMP 0x20 +#define MPU3050_EXT_SYNC_GYROX 0x40 +#define MPU3050_EXT_SYNC_GYROY 0x60 +#define MPU3050_EXT_SYNC_GYROZ 0x80 +#define MPU3050_EXT_SYNC_ACCELX 0xA0 +#define MPU3050_EXT_SYNC_ACCELY 0xC0 +#define MPU3050_EXT_SYNC_ACCELZ 0xE0 +#define MPU3050_EXT_SYNC_MASK 0xE0 +#define MPU3050_FS_250DPS 0x00 +#define MPU3050_FS_500DPS 0x08 +#define MPU3050_FS_1000DPS 0x10 +#define MPU3050_FS_2000DPS 0x18 +#define MPU3050_FS_MASK 0x18 +#define MPU3050_DLPF_CFG_256HZ_NOLPF2 0x00 +#define MPU3050_DLPF_CFG_188HZ 0x01 +#define MPU3050_DLPF_CFG_98HZ 0x02 +#define MPU3050_DLPF_CFG_42HZ 0x03 +#define MPU3050_DLPF_CFG_20HZ 0x04 +#define MPU3050_DLPF_CFG_10HZ 0x05 +#define MPU3050_DLPF_CFG_5HZ 0x06 +#define MPU3050_DLPF_CFG_2100HZ_NOLPF 0x07 +#define MPU3050_DLPF_CFG_MASK 0x07 +/* INT_CFG */ +#define MPU3050_RAW_RDY_EN 0x01 +#define MPU3050_MPU_RDY_EN 0x02 +#define MPU3050_LATCH_INT_EN 0x04 +/* PWR_MGM */ +#define MPU3050_PWR_MGM_PLL_X 0x01 +#define MPU3050_PWR_MGM_PLL_Y 0x02 +#define MPU3050_PWR_MGM_PLL_Z 0x03 +#define MPU3050_PWR_MGM_CLKSEL 0x07 +#define MPU3050_PWR_MGM_STBY_ZG 0x08 +#define MPU3050_PWR_MGM_STBY_YG 0x10 +#define MPU3050_PWR_MGM_STBY_XG 0x20 +#define MPU3050_PWR_MGM_SLEEP 0x40 +#define MPU3050_PWR_MGM_RESET 0x80 +#define MPU3050_PWR_MGM_MASK 0x40 + struct axis_data { s16 x; s16 y; @@ -202,6 +251,51 @@ static irqreturn_t mpu3050_interrupt_thread(int irq, void *data) return IRQ_HANDLED; } +/** + * mpu3050_hw_init - initialize hardware + * @sensor: the sensor + * + * Called during device probe; configures the sampling method. + */ +static int __devinit mpu3050_hw_init(struct mpu3050_sensor *sensor) +{ + struct i2c_client *client = sensor->client; + int ret; + u8 reg; + + /* Reset */ + ret = i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, + MPU3050_PWR_MGM_RESET); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_byte_data(client, MPU3050_PWR_MGM); + if (ret < 0) + return ret; + + ret &= ~MPU3050_PWR_MGM_CLKSEL; + ret |= MPU3050_PWR_MGM_PLL_Z; + ret = i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, ret); + if (ret < 0) + return ret; + + /* Output frequency divider. The poll interval */ + ret = i2c_smbus_write_byte_data(client, MPU3050_SMPLRT_DIV, + MPU3050_DEFAULT_POLL_INTERVAL - 1); + if (ret < 0) + return ret; + + /* Set low pass filter and full scale */ + reg = MPU3050_DEFAULT_FS_RANGE; + reg |= MPU3050_DLPF_CFG_42HZ << 3; + reg |= MPU3050_EXT_SYNC_NONE << 5; + ret = i2c_smbus_write_byte_data(client, MPU3050_DLPF_FS_SYNC, reg); + if (ret < 0) + return ret; + + return 0; +} + /** * mpu3050_probe - device detection callback * @client: i2c client of found device @@ -267,6 +361,10 @@ static int __devinit mpu3050_probe(struct i2c_client *client, pm_runtime_set_active(&client->dev); + error = mpu3050_hw_init(sensor); + if (error) + goto err_pm_set_suspended; + error = request_threaded_irq(client->irq, NULL, mpu3050_interrupt_thread, IRQF_TRIGGER_RISING, -- cgit v1.2.1